1658 files changed, 95484 insertions, 29800 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 7f418bbc261a..d82875820a15 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -83,6 +83,13 @@ config KRETPROBES
 	def_bool y
 	depends on KPROBES && HAVE_KRETPROBES
 
+config USER_RETURN_NOTIFIER
+	bool
+	depends on HAVE_USER_RETURN_NOTIFIER
+	help
+	  Provide a kernel-internal notification when a cpu is about to
+	  switch to user mode.
+
 config HAVE_IOREMAP_PROT
 	bool
 
@@ -126,4 +133,13 @@ config HAVE_DMA_API_DEBUG
 config HAVE_DEFAULT_NO_SPIN_MUTEXES
 	bool
 
+config HAVE_HW_BREAKPOINT
+	bool
+	depends on HAVE_PERF_EVENTS
+	select ANON_INODES
+	select PERF_EVENTS
+
+config HAVE_USER_RETURN_NOTIFIER
+	bool
+
 source "kernel/gcov/Kconfig"
diff --git a/arch/alpha/include/asm/cacheflush.h b/arch/alpha/include/asm/cacheflush.h
index b686cc7fc44e..01d71e1c8a9e 100644
--- a/arch/alpha/include/asm/cacheflush.h
+++ b/arch/alpha/include/asm/cacheflush.h
@@ -9,6 +9,7 @@
 #define flush_cache_dup_mm(mm)			do { } while (0)
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/alpha/include/asm/fcntl.h b/arch/alpha/include/asm/fcntl.h
index 25da0017ec87..21b1117a0c61 100644
--- a/arch/alpha/include/asm/fcntl.h
+++ b/arch/alpha/include/asm/fcntl.h
@@ -1,8 +1,6 @@
 #ifndef _ALPHA_FCNTL_H
 #define _ALPHA_FCNTL_H
 
-/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
-   located on an ext2 file system */
 #define O_CREAT		 01000	/* not fcntl */
 #define O_TRUNC		 02000	/* not fcntl */
 #define O_EXCL		 04000	/* not fcntl */
@@ -10,13 +8,28 @@
 
 #define O_NONBLOCK	 00004
 #define O_APPEND	 00010
-#define O_SYNC		040000
+#define O_DSYNC		040000	/* used to be O_SYNC, see below */
 #define O_DIRECTORY	0100000	/* must be a directory */
 #define O_NOFOLLOW	0200000 /* don't follow links */
 #define O_LARGEFILE	0400000 /* will be set by the kernel on every open */
 #define O_DIRECT	02000000 /* direct disk access - should check with OSF/1 */
 #define O_NOATIME	04000000
 #define O_CLOEXEC	010000000 /* set close_on_exec */
+/*
+ * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using
+ * the O_SYNC flag.  We continue to use the existing numerical value
+ * for O_DSYNC semantics now, but using the correct symbolic name for it.
+ * This new value is used to request true Posix O_SYNC semantics.  It is
+ * defined in this strange way to make sure applications compiled against
+ * new headers get at least O_DSYNC semantics on older kernels.
+ *
+ * This has the nice side-effect that we can simply test for O_DSYNC
+ * wherever we do not care if O_DSYNC or O_SYNC is used.
+ *
+ * Note: __O_SYNC must never be used directly.
+ */
+#define __O_SYNC	020000000
+#define O_SYNC		(__O_SYNC|O_DSYNC)
 
 #define F_GETLK		7
 #define F_SETLK		8
diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h
index 26773e3246e2..06edfefc3373 100644
--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -67,6 +67,8 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             40
+
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 5b5c17485942..7f23665122df 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -433,10 +433,11 @@
 #define __NR_signalfd			476
 #define __NR_timerfd			477
 #define __NR_eventfd			478
+#define __NR_recvmmsg			479
 
 #ifdef __KERNEL__
 
-#define NR_SYSCALLS			479
+#define NR_SYSCALLS			480
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 9a3334ae282e..62619f25132f 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -178,25 +178,18 @@ SYSCALL_DEFINE6(osf_mmap, unsigned long, addr, unsigned long, len,
 		unsigned long, prot, unsigned long, flags, unsigned long, fd,
 		unsigned long, off)
 {
-	struct file *file = NULL;
-	unsigned long ret = -EBADF;
+	unsigned long ret = -EINVAL;
 
 #if 0
 	if (flags & (_MAP_HASSEMAPHORE | _MAP_INHERIT | _MAP_UNALIGNED))
 		printk("%s: unimplemented OSF mmap flags %04lx\n", 
 			current->comm, flags);
 #endif
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	down_write(&current->mm->mmap_sem);
-	ret = do_mmap(file, addr, len, prot, flags, off);
-	up_write(&current->mm->mmap_sem);
-	if (file)
-		fput(file);
+	if ((off + PAGE_ALIGN(len)) < off)
+		goto out;
+	if (off & ~PAGE_MASK)
+		goto out;
+	ret = sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT);
  out:
 	return ret;
 }
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index 95c9aef1c106..cda6b8b3d573 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -497,6 +497,7 @@ sys_call_table:
 	.quad sys_signalfd
 	.quad sys_ni_syscall
 	.quad sys_eventfd
+	.quad sys_recvmmsg
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index 10b403554b65..7b2c56d8f930 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -197,7 +197,7 @@ setup_memory_node(int nid, void *kernel_end)
 	}
 
 	if (bootmap_start == -1)
-		panic("couldn't find a contigous place for the bootmap");
+		panic("couldn't find a contiguous place for the bootmap");
 
 	/* Allocate the bootmap and mark the whole MM as reserved.  */
 	bootmap_size = init_bootmem_node(NODE_DATA(nid), bootmap_start,
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1c4119c60040..cf8a99f19dc4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -433,6 +433,17 @@ config ARCH_L7200
 	  If you have any questions or comments about the Linux kernel port
 	  to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_DOVE
+	bool "Marvell Dove"
+	select PCI
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the Marvell Dove SoC 88AP510
+
 config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
 	select CPU_FEROCEON
@@ -702,6 +713,16 @@ config ARCH_BCMRING
 	help
 	  Support for Broadcom's BCMRing platform.
 
+config ARCH_U8500
+	bool "ST-Ericsson U8500 Series"
+	select CPU_V7
+	select ARM_AMBA
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select COMMON_CLKDEV
+	help
+	  Support for ST-Ericsson's Ux500 architecture
+
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -747,6 +768,9 @@ source "arch/arm/mach-orion5x/Kconfig"
 
 source "arch/arm/mach-kirkwood/Kconfig"
 
+source "arch/arm/mach-dove/Kconfig"
+
+source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
@@ -787,6 +811,7 @@ source "arch/arm/mach-at91/Kconfig"
 source "arch/arm/plat-mxc/Kconfig"
 
 source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
 
 source "arch/arm/mach-netx/Kconfig"
 
@@ -804,12 +829,16 @@ source "arch/arm/mach-w90x900/Kconfig"
 
 source "arch/arm/mach-bcmring/Kconfig"
 
+source "arch/arm/mach-ux500/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
 
 config PLAT_IOP
 	bool
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_TIME
 
 config PLAT_ORION
 	bool
@@ -955,10 +984,10 @@ source "kernel/time/Kconfig"
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
 	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
+	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1027,9 +1056,9 @@ config HOTPLUG_CPU
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
 	default y
-	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 1a6f70e52921..ff54c23d085e 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -83,6 +83,14 @@ config DEBUG_ICEDCC
 	  It does include a timeout to ensure that the system does not
 	  totally freeze when there is nothing connected to read.
 
+config OC_ETM
+	bool "On-chip ETM and ETB"
+	select ARM_AMBA
+	help
+	  Enables the on-chip embedded trace macrocell and embedded trace
+	  buffer driver that will allow you to collect traces of the
+	  kernel code.
+
 config DEBUG_DC21285_PORT
 	bool "Kernel low-level debugging messages via footbridge serial port"
 	depends on DEBUG_LL && FOOTBRIDGE
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a73caaf66763..fa0cdab2e1d3 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -122,6 +122,7 @@ machine-$(CONFIG_ARCH_AT91)		:= at91
 machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
 machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
+machine-$(CONFIG_ARCH_DOVE)		:= dove
 machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
 machine-$(CONFIG_ARCH_GEMINI)		:= gemini
@@ -166,6 +167,7 @@ machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
 machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
 machine-$(CONFIG_ARCH_U300)		:= u300
+machine-$(CONFIG_ARCH_U8500)		:= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
@@ -176,11 +178,12 @@ machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
 plat-$(CONFIG_PLAT_IOP)		:= iop
+plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
-plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
-plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
+plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fa6fbf45cf3b..d356af7cef82 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -743,6 +743,12 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 
+		.word	0x560f5810		@ Marvell PJ4 ARMv6
+		.word	0xff0ffff0
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv6_mmu_cache_flush
+
 		.word	0x000f0000		@ new CPU Id
 		.word	0x000f0000
 		W(b)	__armv7_mmu_cache_on
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 734ac9135998..5a375e5fef21 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -342,6 +342,22 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 }
 EXPORT_SYMBOL(dma_map_single);
 
+/*
+ * see if a mapped address was really a "safe" buffer and if so, copy
+ * the data from the safe buffer back to the unsafe buffer and free up
+ * the safe buffer.  (basically return things back to the way they
+ * should be)
+ */
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		enum dma_data_direction dir)
+{
+	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
+		__func__, (void *) dma_addr, size, dir);
+
+	unmap_single(dev, dma_addr, size, dir);
+}
+EXPORT_SYMBOL(dma_unmap_single);
+
 dma_addr_t dma_map_page(struct device *dev, struct page *page,
 		unsigned long offset, size_t size, enum dma_data_direction dir)
 {
@@ -366,8 +382,7 @@ EXPORT_SYMBOL(dma_map_page);
  * the safe buffer.  (basically return things back to the way they
  * should be)
  */
-
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+void dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
 		enum dma_data_direction dir)
 {
 	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
@@ -375,7 +390,7 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 
 	unmap_single(dev, dma_addr, size, dir);
 }
-EXPORT_SYMBOL(dma_unmap_single);
+EXPORT_SYMBOL(dma_unmap_page);
 
 int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
 		unsigned long off, size_t sz, enum dma_data_direction dir)
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 7713a08bb10c..37bda5f3dde3 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -82,7 +82,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
 
-	/* XXX: I'm usure,  but it seems so */
+	/* XXX: I'm unsure, but it seems so */
 	return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1));
 }
 
diff --git a/arch/arm/configs/da830_omapl137_defconfig b/arch/arm/configs/am3517_evm_defconfig
index 7c8e38f5c5ab..ad54e92dd436 100644
--- a/arch/arm/configs/da830_omapl137_defconfig
+++ b/arch/arm/configs/am3517_evm_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2-davinci1
-# Wed May 13 15:33:29 2009
+# Linux kernel version: 2.6.32-rc5
+# Wed Oct 28 15:47:47 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,43 +16,41 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
+CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
 
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
+# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
@@ -76,11 +72,10 @@ CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,19 +88,25 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -114,11 +115,11 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -127,8 +128,8 @@ CONFIG_BLOCK=y
 #
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
@@ -139,19 +140,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -160,59 +164,86 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
-CONFIG_ARCH_DAVINCI=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_CP_INTC=y
-
-#
-# TI DaVinci Implementations
-#
-
-#
-# DaVinci Core Type
-#
-# CONFIG_ARCH_DAVINCI_DM644x is not set
-# CONFIG_ARCH_DAVINCI_DM646x is not set
-# CONFIG_ARCH_DAVINCI_DM355 is not set
-CONFIG_ARCH_DAVINCI_DA830=y
-
-#
-# DaVinci Board Type
-#
-CONFIG_MACH_DAVINCI_DA830_EVM=y
-CONFIG_DAVINCI_MUX=y
-# CONFIG_DAVINCI_MUX_DEBUG is not set
-# CONFIG_DAVINCI_MUX_WARNINGS is not set
-CONFIG_DAVINCI_RESET_CLOCKS=y
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+CONFIG_MACH_OMAP3517EVM=y
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_CM_T35 is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 
@@ -220,11 +251,15 @@ CONFIG_CPU_CP15_MMU=y
 # Processor Features
 #
 CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -245,11 +280,13 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+CONFIG_OABI_COMPAT=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -260,30 +297,31 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
 #
 # CPU Power Management
 #
+# CONFIG_CPU_FREQ is not set
 # CONFIG_CPU_IDLE is not set
 
 #
@@ -293,7 +331,12 @@ CONFIG_CMDLINE=""
 #
 # At least one emulation must be selected
 #
-# CONFIG_VFP is not set
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
 
 #
 # Userspace binary formats
@@ -302,7 +345,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=y
 
 #
 # Power management options
@@ -322,15 +365,16 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -339,7 +383,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
@@ -350,54 +394,12 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -412,6 +414,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -424,7 +427,16 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -437,6 +449,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -448,27 +461,18 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -476,7 +480,7 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
+CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
@@ -485,16 +489,12 @@ CONFIG_SCSI_PROC_FS=y
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -518,73 +518,9 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_NETDEVICES is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -596,52 +532,25 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -649,7 +558,7 @@ CONFIG_SERIO_LIBPS2=y
 #
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_VT_CONSOLE is not set
+CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_DEVKMEM=y
@@ -660,9 +569,13 @@ CONFIG_DEVKMEM=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
 
 #
 # Non-8250 serial port support
@@ -671,55 +584,20 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM=y
 # CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_DAVINCI=y
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
 
 #
-# Miscellaneous I2C Chip support
+# PPS support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -732,9 +610,6 @@ CONFIG_GPIOLIB=y
 #
 # I2C GPIO expanders:
 #
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-CONFIG_GPIO_PCF857X=m
 
 #
 # PCI GPIO expanders:
@@ -743,19 +618,15 @@ CONFIG_GPIO_PCF857X=m
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_DAVINCI_WATCHDOG is not set
+# CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -771,32 +642,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -816,72 +667,170 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SOC=m
-CONFIG_SND_DAVINCI_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -892,30 +841,31 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
 # CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
+# CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
@@ -958,36 +908,32 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
-CONFIG_MINIX_FS=m
+# CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1039,7 +985,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -1053,7 +999,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
@@ -1063,9 +1009,10 @@ CONFIG_NLS_UTF8=m
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -1075,15 +1022,13 @@ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_PREEMPT=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
@@ -1093,50 +1038,48 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_ARM_UNWIND=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
 
 #
 # Security options
@@ -1150,11 +1093,20 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1169,12 +1121,12 @@ CONFIG_CRYPTO=y
 #
 # Block modes
 #
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_ECB=m
 # CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
+CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_XTS is not set
 
 #
@@ -1182,13 +1134,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_RMD128 is not set
 # CONFIG_CRYPTO_RMD160 is not set
@@ -1210,7 +1164,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
@@ -1230,7 +1184,7 @@ CONFIG_CRYPTO=y
 # Random Number Generation
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
+CONFIG_CRYPTO_HW=y
 # CONFIG_BINARY_PRINTF is not set
 
 #
@@ -1238,16 +1192,15 @@ CONFIG_CRYPTO=y
 #
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 238b218394e3..c97e1022ada1 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -120,6 +120,7 @@ CONFIG_ARCH_AT91RM9200DK=y
 # CONFIG_MACH_CARMEVA is not set
 # CONFIG_MACH_KB9200 is not set
 # CONFIG_MACH_ATEB9200 is not set
+CONFIG_MACH_ECO920=y
 
 #
 # AT91RM9200 Feature Selections
diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig
new file mode 100644
index 000000000000..e42c5c873eb2
--- /dev/null
+++ b/arch/arm/configs/cm_t35_defconfig
@@ -0,0 +1,1733 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc4
+# Tue Oct 13 17:10:40 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+CONFIG_MACH_CM_T35=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=m
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index d18d21bb41e4..a0170867130e 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc8
-# Thu Jun  4 09:53:21 2009
+# Linux kernel version: 2.6.32-rc4
+# Tue Oct 13 19:03:13 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +16,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -46,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
@@ -83,7 +82,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -96,6 +94,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -103,13 +105,17 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -117,11 +123,11 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,19 +148,22 @@ CONFIG_FREEZER=y
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -163,25 +172,27 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
@@ -191,16 +202,19 @@ CONFIG_ARCH_PXA=y
 # Supported PXA3xx Processor Variants
 #
 CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
+CONFIG_CPU_PXA310=y
 # CONFIG_CPU_PXA320 is not set
 # CONFIG_CPU_PXA930 is not set
 # CONFIG_CPU_PXA935 is not set
+# CONFIG_CPU_PXA950 is not set
 # CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_MACH_MP900C is not set
+# CONFIG_MACH_BALLOON3 is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
 # CONFIG_ARCH_VIPER is not set
@@ -218,6 +232,7 @@ CONFIG_CPU_PXA300=y
 # CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_CM_X300=y
+# CONFIG_MACH_H4700 is not set
 # CONFIG_MACH_MAGICIAN is not set
 # CONFIG_MACH_HIMALAYA is not set
 # CONFIG_MACH_MIOA701 is not set
@@ -225,8 +240,8 @@ CONFIG_MACH_CM_X300=y
 # CONFIG_ARCH_PXA_PALM is not set
 # CONFIG_MACH_CSB726 is not set
 # CONFIG_PXA_EZX is not set
+# CONFIG_MACH_XCEP is not set
 CONFIG_PXA3xx=y
-# CONFIG_PXA_PWM is not set
 CONFIG_PLAT_PXA=y
 
 #
@@ -236,7 +251,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSC3=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -246,11 +261,12 @@ CONFIG_IO_36=y
 #
 # Processor Features
 #
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_XSC3L2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_COMMON_CLKDEV=y
 
@@ -272,11 +288,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
@@ -292,17 +309,19 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
+CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -355,6 +374,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -396,6 +416,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -410,6 +431,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -433,22 +455,27 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-# CONFIG_BT_HCIBTUSB is not set
+CONFIG_BT_HCIBTUSB=m
 # CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
 # CONFIG_BT_HCIBCM203X is not set
 # CONFIG_BT_HCIBPA10X is not set
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
 # CONFIG_LIB80211_DEBUG is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -461,6 +488,7 @@ CONFIG_LIB80211=m
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -472,9 +500,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
@@ -521,6 +549,9 @@ CONFIG_MTD_CFI_I2=y
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -556,7 +587,15 @@ CONFIG_MTD_NAND_PXA3xx=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -570,6 +609,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -593,10 +633,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -621,7 +657,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -636,6 +671,7 @@ CONFIG_MII=y
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=0
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
@@ -648,20 +684,20 @@ CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=m
 # CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
 # CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_HOSTAP is not set
 
 #
@@ -683,6 +719,7 @@ CONFIG_LIBERTAS_SDIO=m
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -706,33 +743,51 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DA9034 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -760,6 +815,7 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
@@ -774,6 +830,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -784,6 +841,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
@@ -807,19 +865,36 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+# CONFIG_SPI_PXA2XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # Memory mapped GPIO expanders:
@@ -839,11 +914,17 @@ CONFIG_GPIO_PCA953X=y
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -860,32 +941,33 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
+CONFIG_PMIC_DA903X=y
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -925,7 +1007,17 @@ CONFIG_FB_PXA=y
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
 # CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_DA903X=m
 
 #
 # Display device support
@@ -956,38 +1048,48 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
 CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
 CONFIG_SND_ARM=y
 CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
 # CONFIG_SND_PXA2XX_AC97 is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_EM_X270=m
 CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM9712=m
 # CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-CONFIG_HID_DEBUG=y
 # CONFIG_HIDRAW is not set
 
 #
@@ -1006,10 +1108,12 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
 CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1023,9 +1127,15 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 # CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_WACOM=m
+CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1054,6 +1164,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1151,8 +1262,9 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 CONFIG_MMC_PXA=m
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1162,8 +1274,10 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DA903X is not set
+# CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
 
 #
@@ -1179,6 +1293,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1210,10 +1325,19 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1233,12 +1357,15 @@ CONFIG_RTC_DRV_V3020=y
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_RTC_DRV_SA1100 is not set
+CONFIG_RTC_DRV_PXA=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1256,10 +1383,13 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1319,6 +1449,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1329,12 +1465,12 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1378,7 +1514,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1428,6 +1564,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1441,6 +1578,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1460,32 +1598,20 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1509,7 +1635,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1551,11 +1676,13 @@ CONFIG_CRYPTO_ECB=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -1591,9 +1718,9 @@ CONFIG_CRYPTO_DES=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_LZO=y
 
 #
 # Random Number Generation
@@ -1608,7 +1735,7 @@ CONFIG_CRYPTO_DES=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1616,6 +1743,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
diff --git a/arch/arm/configs/da850_omapl138_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index 842a70b079bf..50bd25a10f0d 100644
--- a/arch/arm/configs/da850_omapl138_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-davinci1
-# Mon Jun 29 07:54:15 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Oct 22 12:19:19 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +16,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -48,11 +46,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -62,8 +61,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -80,7 +78,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,6 +90,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -100,12 +101,16 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +123,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -139,19 +144,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -160,25 +168,27 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 CONFIG_CP_INTC=y
 
 #
@@ -191,7 +201,7 @@ CONFIG_CP_INTC=y
 # CONFIG_ARCH_DAVINCI_DM644x is not set
 # CONFIG_ARCH_DAVINCI_DM355 is not set
 # CONFIG_ARCH_DAVINCI_DM646x is not set
-# CONFIG_ARCH_DAVINCI_DA830 is not set
+CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
 CONFIG_ARCH_DAVINCI_DA8XX=y
 # CONFIG_ARCH_DAVINCI_DM365 is not set
@@ -199,7 +209,14 @@ CONFIG_ARCH_DAVINCI_DA8XX=y
 #
 # DaVinci Board Type
 #
+CONFIG_MACH_DAVINCI_DA830_EVM=y
+CONFIG_DA830_UI=y
+CONFIG_DA830_UI_LCD=y
+# CONFIG_DA830_UI_NAND is not set
 CONFIG_MACH_DAVINCI_DA850_EVM=y
+CONFIG_DA850_UI_EXP=y
+CONFIG_DA850_UI_NONE=y
+# CONFIG_DA850_UI_RMII is not set
 CONFIG_DAVINCI_MUX=y
 # CONFIG_DAVINCI_MUX_DEBUG is not set
 # CONFIG_DAVINCI_MUX_WARNINGS is not set
@@ -212,7 +229,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -225,9 +242,9 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -248,11 +265,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -268,12 +286,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 # CONFIG_LEDS_CPU is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -287,7 +307,24 @@ CONFIG_CMDLINE=""
 #
 # CPU Power Management
 #
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Floating point emulation
@@ -401,6 +438,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_IP6_NF_IPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -415,6 +453,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -440,6 +479,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -460,6 +500,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -471,6 +512,7 @@ CONFIG_MISC_DEVICES=y
 #
 CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -494,10 +536,6 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -522,7 +560,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -553,7 +590,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-# CONFIG_TI_DAVINCI_EMAC is not set
+CONFIG_TI_DAVINCI_EMAC=y
 # CONFIG_DM9000 is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
@@ -567,12 +604,11 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -588,6 +624,7 @@ CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -611,23 +648,30 @@ CONFIG_INPUT_EVBUG=m
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -636,6 +680,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -684,6 +729,7 @@ CONFIG_HW_RANDOM=m
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -695,6 +741,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -715,14 +762,17 @@ CONFIG_I2C_DAVINCI=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -736,8 +786,8 @@ CONFIG_GPIOLIB=y
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCF857X=y
 
 #
 # PCI GPIO expanders:
@@ -746,11 +796,14 @@ CONFIG_GPIO_PCF857X=m
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -782,31 +835,56 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+CONFIG_REGULATOR_TPS6507X=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_DAVINCI is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_DA8XX=y
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -819,6 +897,16 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
 # CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
@@ -834,6 +922,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -842,6 +935,8 @@ CONFIG_SND_DRIVERS=y
 CONFIG_SND_ARM=y
 CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
+# CONFIG_SND_DA830_SOC_EVM is not set
+# CONFIG_SND_DA850_SOC_EVM is not set
 CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
@@ -849,14 +944,17 @@ CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -877,14 +975,17 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -943,7 +1044,6 @@ CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1039,6 +1139,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1056,6 +1157,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_PI_LIST=y
@@ -1076,29 +1178,29 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1125,7 +1227,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1157,11 +1258,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index ddffe39d9f87..bd656e8e6e4c 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3-davinci1
-# Fri Jul 17 08:26:52 2009
+# Linux kernel version: 2.6.32-rc4
+# Mon Oct 12 14:13:12 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -46,11 +45,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,17 +91,15 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -145,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -159,6 +158,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -181,11 +181,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
 CONFIG_AINTC=y
 CONFIG_ARCH_DAVINCI_DMx=y
 
@@ -208,6 +210,7 @@ CONFIG_ARCH_DAVINCI_DM365=y
 #
 CONFIG_MACH_DAVINCI_EVM=y
 CONFIG_MACH_SFFSDR=y
+CONFIG_MACH_NEUROS_OSD2=y
 CONFIG_MACH_DAVINCI_DM355_EVM=y
 CONFIG_MACH_DM355_LEOPARD=y
 CONFIG_MACH_DAVINCI_DM6467_EVM=y
@@ -224,7 +227,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -239,6 +242,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -259,6 +263,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -280,6 +286,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 # CONFIG_LEDS_CPU is not set
@@ -412,6 +419,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_IP6_NF_IPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -452,6 +460,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -461,9 +470,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -499,7 +508,7 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_INTELEXT=m
 CONFIG_MTD_CFI_AMDSTD=m
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=m
@@ -694,12 +703,10 @@ CONFIG_DM9000_DEBUGLEVEL=4
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -734,6 +741,7 @@ CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -745,10 +753,7 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
@@ -757,12 +762,16 @@ CONFIG_INPUT_EVBUG=m
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_XTKBD=m
@@ -777,6 +786,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -787,7 +797,17 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_DM355EVM=m
+CONFIG_INPUT_DM365EVM=m
 
 #
 # Hardware I/O ports
@@ -828,13 +848,13 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -868,13 +888,17 @@ CONFIG_I2C_DAVINCI=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -889,7 +913,7 @@ CONFIG_GPIOLIB=y
 #
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
-CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_PCF857X=y
 
 #
 # PCI GPIO expanders:
@@ -898,10 +922,19 @@ CONFIG_GPIO_PCF857X=m
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -950,6 +983,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -959,9 +993,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -988,7 +1020,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_DM355EVM_MSP is not set
+CONFIG_MFD_DM355EVM_MSP=y
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TPS65010 is not set
@@ -999,9 +1031,11 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
@@ -1013,9 +1047,9 @@ CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -1032,6 +1066,7 @@ CONFIG_FIRMWARE_EDID=y
 # Frame buffer hardware drivers
 #
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_DAVINCI=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
@@ -1101,7 +1136,6 @@ CONFIG_SND_SOC_TLV320AIC3X=m
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1130,6 +1164,7 @@ CONFIG_HID_CYPRESS=m
 CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=m
 # CONFIG_LOGITECH_FF is not set
@@ -1176,6 +1211,7 @@ CONFIG_USB_MON=m
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
@@ -1269,6 +1305,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
@@ -1286,6 +1323,7 @@ CONFIG_USB_ZERO=m
 # CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
@@ -1316,8 +1354,10 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_DAVINCI=m
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 
@@ -1345,6 +1385,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
 
@@ -1370,6 +1411,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_DM355EVM is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1399,8 +1441,11 @@ CONFIG_RTC_INTF_DEV=y
 #
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1429,6 +1474,7 @@ CONFIG_XFS_FS=m
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1500,7 +1546,6 @@ CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1596,6 +1641,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1634,11 +1680,14 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1663,7 +1712,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
+# CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1681,7 +1730,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1713,11 +1761,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
new file mode 100644
index 000000000000..b3a491675d59
--- /dev/null
+++ b/arch/arm/configs/dove_defconfig
@@ -0,0 +1,1620 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Tue Nov 24 13:53:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_DOVE=y
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Marvell Dove Implementations
+#
+CONFIG_MACH_DOVE_DB=y
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_TAUROS2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_ORION=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MV=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_MV_CESA is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index d5ee16e6abf3..492f29aba332 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon Jul  7 17:52:21 2008
+# Linux kernel version: 2.6.32-rc5
+# Mon Nov  2 13:18:50 2009
 #
 CONFIG_ARM=y
 CONFIG_HAVE_PWM=y
@@ -9,24 +9,22 @@ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -35,7 +33,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION="-ezxdev"
+CONFIG_LOCALVERSION="-ezx200910312315"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
@@ -44,56 +42,78 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -101,12 +121,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -120,25 +138,27 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -146,39 +166,64 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
 #
 # CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_MACH_BALLOON3 is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
 # CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
 # CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
 # CONFIG_MACH_ZYLONITE is not set
 # CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
 # CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
 # CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
 CONFIG_PXA_EZX=y
 CONFIG_MACH_EZX_A780=y
 CONFIG_MACH_EZX_E680=y
@@ -186,17 +231,11 @@ CONFIG_MACH_EZX_A1200=y
 CONFIG_MACH_EZX_A910=y
 CONFIG_MACH_EZX_E6=y
 CONFIG_MACH_EZX_E2=y
+# CONFIG_MACH_XCEP is not set
 CONFIG_PXA27x=y
 CONFIG_PXA_SSP=y
-CONFIG_PXA_PWM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
 
 #
 # Processor Type
@@ -205,7 +244,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -216,9 +255,10 @@ CONFIG_CPU_CP15_MMU=y
 #
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -231,44 +271,71 @@ CONFIG_XSCALE_PMU=y
 # Kernel Features
 #
 CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
+CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
 CONFIG_ATAGS_PROC=y
 
 #
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Floating point emulation
@@ -285,6 +352,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 
@@ -297,11 +366,8 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -315,6 +381,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -342,7 +409,6 @@ CONFIG_INET_TUNNEL=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -393,18 +459,22 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
 # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -413,20 +483,23 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 # CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -434,20 +507,21 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -455,8 +529,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -469,9 +543,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -483,30 +557,29 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
 # CONFIG_BRIDGE_NF_EBTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -517,9 +590,11 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -529,64 +604,34 @@ CONFIG_NET_SCH_FIFO=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 CONFIG_BT=y
-CONFIG_BT_L2CAP=m
+CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM=y
 CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP=y
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
+CONFIG_BT_HIDP=y
 
 #
 # Bluetooth device drivers
 #
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
 # CONFIG_BT_HCIUART_BCSP is not set
 # CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
-CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_MESH is not set
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -598,13 +643,19 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -616,9 +667,9 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
@@ -647,7 +698,7 @@ CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
+CONFIG_MTD_OTP=y
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
@@ -655,19 +706,15 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_XIP=y
+# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PXA2XX=y
 # CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -675,6 +722,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -690,6 +738,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -700,15 +753,14 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -722,7 +774,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -732,13 +783,11 @@ CONFIG_DUMMY=y
 # CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -765,6 +814,7 @@ CONFIG_SLHC=m
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -786,29 +836,45 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_TOUCHSCREEN_PCAP=y
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_ATI_REMOTE is not set
@@ -816,7 +882,10 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_KEYSPAN_REMOTE is not set
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_PCAP=y
 
 #
 # Hardware I/O ports
@@ -828,6 +897,7 @@ CONFIG_INPUT_UINPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -842,92 +912,130 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=8
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
 # CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
 
 #
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_PXA2XX=m
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
 
 #
-# GPIO Support
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
 #
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -938,54 +1046,170 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
 CONFIG_EZX_PCAP=y
-
-#
-# Multimedia devices
-#
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_PCAP=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
 
 #
 # Multimedia core support
 #
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
 CONFIG_VIDEO_ALLOW_V4L1=y
 CONFIG_VIDEO_V4L1_COMPAT=y
 # CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
+CONFIG_VIDEO_MEDIA=y
 
 #
 # Multimedia drivers
 #
 # CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_CPIA2 is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=y
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_VIDEO_PXA27x is not set
 CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
 # CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+CONFIG_RADIO_TEA5764=y
+CONFIG_RADIO_TEA5764_XTAL=y
 # CONFIG_DAB is not set
 
 #
@@ -996,6 +1220,7 @@ CONFIG_RADIO_ADAPTERS=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1017,15 +1242,19 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
 # CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
 # CONFIG_FB_MBX is not set
-# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_W100 is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
 CONFIG_BACKLIGHT_PWM=y
 
 #
@@ -1053,85 +1282,60 @@ CONFIG_FONT_MINI_4x6=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-
-#
-# SPI devices
-#
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_PXA2XX_LIB=y
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
 #
 # CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
 
 #
 # USB HID Boot Protocol drivers
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_APPLE=m
+# CONFIG_HID_WACOM is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1150,32 +1354,42 @@ CONFIG_USB=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1183,7 +1397,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1196,7 +1409,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1204,62 +1417,94 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 CONFIG_USB_GADGET_PXA27X=y
 CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 # CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_SDIO_UART=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_LP3944=y
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1267,7 +1512,14 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1297,45 +1549,67 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_SA1100 is not set
+# CONFIG_RTC_DRV_PXA is not set
+CONFIG_RTC_DRV_PCAP=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
 #
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=m
-CONFIG_FS_MBCACHE=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -1350,6 +1624,10 @@ CONFIG_XFS_FS=m
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1357,6 +1635,12 @@ CONFIG_INOTIFY_USER=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1381,15 +1665,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1397,13 +1679,35 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1411,19 +1715,18 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
+# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
-# CONFIG_ROOT_NFS is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1490,25 +1793,83 @@ CONFIG_NLS_UTF8=m
 #
 # Kernel hacking
 #
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
 CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
@@ -1516,12 +1877,20 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
 CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
 CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1549,14 +1918,20 @@ CONFIG_CRYPTO_XTS=m
 #
 CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1587,28 +1962,40 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index f6aed7747d4d..efa78e144e5c 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,86 +1,189 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Thu Jun  9 01:59:03 2005
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 24 00:09:30 2009
 #
 CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
 
 #
-# Loadable module support
+# GCOV-based kernel profiling
 #
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_FREEZER=y
 
 #
 # System Type
 #
-# CONFIG_ARCH_CLPS7500 is not set
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # SA11x0 Implementations
@@ -106,27 +209,31 @@ CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_V4WB=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 
 #
 # Bus support
 #
 CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 
 #
 # PC-card bridges
@@ -138,11 +245,41 @@ CONFIG_PCMCIA_SA1100=y
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -151,22 +288,26 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_STAT is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 # CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_SA1100=y
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -183,6 +324,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -191,8 +334,120 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# FIR device drivers
+#
+CONFIG_SA1100_FIR=m
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -201,15 +456,17 @@ CONFIG_PM=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
@@ -218,15 +475,20 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -249,6 +511,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
@@ -265,7 +528,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -273,7 +536,6 @@ CONFIG_MTD_SA1100=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -282,26 +544,21 @@ CONFIG_MTD_SA1100=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# LPDDR flash memory drivers
 #
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Plug and Play support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
 # CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -309,212 +566,58 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
 
 #
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDECD=m
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-CONFIG_SA1100_FIR=m
-# CONFIG_VIA_FIR is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 # CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
@@ -525,10 +628,6 @@ CONFIG_PCMCIA_PCNET=y
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -537,20 +636,23 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -560,7 +662,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -568,47 +669,42 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
@@ -618,71 +714,125 @@ CONFIG_SERIAL_SA1100_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
 
 #
-# IPMI
+# PCMCIA character devices
 #
-# CONFIG_IPMI_HANDLER is not set
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
 
 #
-# Watchdog Cards
+# PPS support
 #
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# Ftape, the floppy tape device driver
+# Memory mapped GPIO expanders:
 #
-# CONFIG_DRM is not set
 
 #
-# PCMCIA character devices
+# I2C GPIO expanders:
 #
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
 
 #
-# TPM devices
+# PCI GPIO expanders:
 #
 
 #
-# I2C support
+# SPI GPIO expanders:
 #
-# CONFIG_I2C is not set
 
 #
-# Misc devices
+# AC97 GPIO expanders:
 #
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Multimedia devices
+# Sonics Silicon Backplane
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+CONFIG_HTC_EGPIO=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP_SA11X0 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_SA1100=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -691,65 +841,54 @@ CONFIG_FB_SA1100=y
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# USB Gadget Support
+# TI VLYNQ
 #
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -771,16 +910,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -788,34 +924,37 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 # CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -831,10 +970,6 @@ CONFIG_SMB_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -875,20 +1010,34 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -896,21 +1045,120 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Hardware crypto devices
+# Random Number Generation
 #
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig
new file mode 100644
index 000000000000..1b39691b816f
--- /dev/null
+++ b/arch/arm/configs/htcherald_defconfig
@@ -0,0 +1,1145 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Sat Dec  5 12:16:24 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP850=y
+# CONFIG_ARCH_OMAP15XX is not set
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_HTCWIZARD is not set
+CONFIG_MACH_HERALD=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_195MHZ=y
+# CONFIG_OMAP_ARM_182MHZ is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=m
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_PCOMP=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig
new file mode 100644
index 000000000000..c97f8d0ded48
--- /dev/null
+++ b/arch/arm/configs/igep0020_defconfig
@@ -0,0 +1,1554 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Fri Nov 13 12:01:17 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+CONFIG_MACH_IGEP0020=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_SPI=m
+CONFIG_ATH_COMMON=m
+CONFIG_AR9170_USB=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_B43=m
+# CONFIG_B43_SDIO is not set
+# CONFIG_B43_PHY_LP is not set
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_HT=y
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_WL12XX=m
+# CONFIG_WL1251 is not set
+# CONFIG_WL1271 is not set
+# CONFIG_IWM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index a4f9a2a8149c..7734ccab2119 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Tue Jul 28 14:11:34 2009
+# Linux kernel version: 2.6.32-rc5
+# Sun Nov  1 22:56:24 2009
 #
 CONFIG_ARM=y
 CONFIG_HAVE_PWM=y
@@ -9,7 +9,6 @@ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -46,11 +45,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -87,16 +87,14 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -139,6 +137,7 @@ CONFIG_FREEZER=y
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -153,6 +152,7 @@ CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -175,18 +175,22 @@ CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Freescale MXC Implementations
 #
 # CONFIG_ARCH_MX1 is not set
 # CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX25 is not set
 CONFIG_ARCH_MX3=y
+# CONFIG_ARCH_MXC91231 is not set
 CONFIG_ARCH_MX31=y
 CONFIG_ARCH_MX35=y
 
@@ -205,6 +209,7 @@ CONFIG_MACH_QONG=y
 CONFIG_MACH_PCM043=y
 CONFIG_MACH_ARMADILLO5X0=y
 CONFIG_MACH_MX35_3DS=y
+CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_ARCH_HAS_RNGA=y
@@ -218,7 +223,7 @@ CONFIG_CPU_V6=y
 # CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
 CONFIG_CPU_CACHE_V6=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
@@ -236,6 +241,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_L2X0=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
 # CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_COMMON_CLKDEV=y
 
@@ -257,6 +263,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -277,6 +285,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -326,6 +335,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -367,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -407,6 +418,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -416,9 +428,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -587,14 +599,12 @@ CONFIG_DNET=y
 # CONFIG_B44 is not set
 # CONFIG_CS89x0 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC=y
 # CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -608,6 +618,7 @@ CONFIG_FEC=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -630,7 +641,14 @@ CONFIG_DEVKMEM=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
@@ -649,6 +667,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -681,15 +700,17 @@ CONFIG_I2C_IMX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -712,6 +733,10 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 CONFIG_W1=y
 
 #
@@ -734,7 +759,6 @@ CONFIG_W1_SLAVE_THERM=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -759,12 +783,24 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 CONFIG_MFD_WM8350=y
 CONFIG_MFD_WM8350_CONFIG_MODE_0=y
 CONFIG_MFD_WM8352_CONFIG_MODE_0=y
 CONFIG_MFD_WM8350_I2C=y
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_WM8350=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
 
 #
@@ -874,10 +910,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_MXC=y
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
@@ -896,16 +934,11 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_WM8350=y
-# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -921,6 +954,7 @@ CONFIG_REGULATOR_WM8350=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -995,7 +1029,6 @@ CONFIG_UBIFS_FS_ZLIB=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1033,6 +1066,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1062,7 +1096,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1104,11 +1137,13 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/nuc910_defconfig
index 5245655a0ad3..5245655a0ad3 100644
--- a/arch/arm/configs/w90p910_defconfig
+++ b/arch/arm/configs/nuc910_defconfig
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig
new file mode 100644
index 000000000000..df1de9b45ca4
--- /dev/null
+++ b/arch/arm/configs/nuc950_defconfig
@@ -0,0 +1,922 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:31:33 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC950=y
+
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+
+#
+# NUC950 Machines
+#
+CONFIG_MACH_W90P950EVB=y
+
+#
+# NUC960 Machines
+#
+# CONFIG_MACH_W90N960EVB is not set
+
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig
new file mode 100644
index 000000000000..4b2cd9eae9bc
--- /dev/null
+++ b/arch/arm/configs/nuc960_defconfig
@@ -0,0 +1,922 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:20:11 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC960=y
+
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+
+#
+# NUC950 Machines
+#
+# CONFIG_MACH_W90P950EVB is not set
+
+#
+# NUC960 Machines
+#
+CONFIG_MACH_W90N960EVB=y
+
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index b3c8cce0f8fb..9cfae374e041 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -52,8 +52,8 @@ CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig
new file mode 100644
index 000000000000..2af28eab9060
--- /dev/null
+++ b/arch/arm/configs/omap3_defconfig
@@ -0,0 +1,2119 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Tue Dec  1 14:04:02 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_LL_DEBUG_NONE=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+CONFIG_MACH_OMAP_LDP=y
+CONFIG_MACH_OVERO=y
+CONFIG_MACH_OMAP3EVM=y
+CONFIG_MACH_OMAP3517EVM=y
+CONFIG_MACH_OMAP3_PANDORA=y
+CONFIG_MACH_OMAP_3430SDP=y
+CONFIG_MACH_NOKIA_RX51=y
+CONFIG_MACH_OMAP_ZOOM2=y
+CONFIG_MACH_OMAP_ZOOM3=y
+CONFIG_MACH_CM_T35=y
+CONFIG_MACH_IGEP0020=y
+CONFIG_MACH_OMAP_3630SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=y
+CONFIG_BT_HCIBPA10X=y
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_CFG80211_DEBUGFS is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_BLK_DEV_DM is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_USB=y
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=y
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_OMAP=y
+CONFIG_FB_OMAP_LCD_VGA=y
+# CONFIG_FB_OMAP_031M3R is not set
+# CONFIG_FB_OMAP_048M3R is not set
+CONFIG_FB_OMAP_079M3R=y
+# CONFIG_FB_OMAP_092M9R is not set
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+# CONFIG_SND_OMAP_SOC_OVERO is not set
+# CONFIG_SND_OMAP_SOC_OMAP3EVM is not set
+# CONFIG_SND_OMAP_SOC_SDP3430 is not set
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+# CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE is not set
+# CONFIG_SND_OMAP_SOC_ZOOM2 is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+CONFIG_USB_WDM=y
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=y
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+CONFIG_LOCK_STAT=y
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index d5ff4776cd0a..e190fc8b9a7c 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -59,8 +59,8 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -617,8 +617,8 @@ CONFIG_MII=y
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
-CONFIG_SMC911X=y
-# CONFIG_SMSC911X is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -676,13 +676,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -1126,7 +1132,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_OMAP is not set
-CONFIG_MMC_OMAP_HS=m
+CONFIG_MMC_OMAP_HS=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
index 150deafb0a6a..b7a8d9fa49db 100644
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -51,8 +51,9 @@ CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
+
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig
new file mode 100644
index 000000000000..7c8515e65c02
--- /dev/null
+++ b/arch/arm/configs/omap3_touchbook_defconfig
@@ -0,0 +1,2431 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Fri Dec  4 16:02:17 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+CONFIG_MACH_OMAP3_TOUCHBOOK=y
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+# CONFIG_IPV6_PIMSM_V2 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=y
+CONFIG_BT_HCIBTSDIO=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=y
+CONFIG_BT_HCIBPA10X=y
+CONFIG_BT_HCIBFUSB=y
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=y
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
+
+#
+# WiMAX Wireless Broadband devices
+#
+# CONFIG_WIMAX_I2400M_USB is not set
+# CONFIG_WIMAX_I2400M_SDIO is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_ATM_DRIVERS is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOATM is not set
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_TWL4030 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+CONFIG_BATTERY_BQ27x00=y
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_OXU210HP_HCD=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_ATM is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ZERO_HNPTEST=y
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_OTUS is not set
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Android
+#
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_FB_UDL is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+# CONFIG_REISERFS_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS_SECURITY is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index 5a305f015307..592457cfbbe5 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-omap1
-# Tue Jun 23 10:36:45 2009
+# Linux kernel version: 2.6.31-rc9-omap1
+# Tue Sep 15 16:48:34 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +17,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -61,12 +58,15 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -79,7 +79,7 @@ CONFIG_KALLSYMS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -88,21 +88,29 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
+# CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -110,12 +118,11 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -126,11 +133,11 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_FREEZER=y
 
 #
@@ -142,12 +149,14 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -156,24 +165,25 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 
 #
 # TI OMAP Implementations
@@ -182,17 +192,19 @@ CONFIG_ARCH_OMAP_OTG=y
 # CONFIG_ARCH_OMAP1 is not set
 # CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
 
 #
 # OMAP Feature Selections
 #
 # CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
 # CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_OMAP_MUX_WARNINGS=y
 CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -200,7 +212,8 @@ CONFIG_OMAP_DM_TIMER=y
 CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 # CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
 
@@ -210,8 +223,11 @@ CONFIG_ARCH_OMAP3430=y
 # CONFIG_MACH_OMAP3_BEAGLE is not set
 # CONFIG_MACH_OMAP_LDP is not set
 # CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
 # CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_3430SDP=y
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
 
 #
 # Processor Type
@@ -234,12 +250,15 @@ CONFIG_CPU_CP15_MMU=y
 # Processor Features
 #
 CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
+# CONFIG_ARM_THUMBEE is not set
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -262,10 +281,10 @@ CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=128
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+CONFIG_OABI_COMPAT=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -277,9 +296,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_LEDS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -288,8 +310,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
 # CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
+# CONFIG_KEXEC is not set
 
 #
 # CPU Power Management
@@ -318,6 +339,9 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 #
 # At least one emulation must be selected
 #
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
 CONFIG_VFPv3=y
 CONFIG_NEON=y
@@ -326,8 +350,9 @@ CONFIG_NEON=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_HAVE_AOUT=y
-CONFIG_BINFMT_AOUT=m
+# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
 
 #
@@ -345,9 +370,8 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
+# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -372,7 +396,7 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
@@ -383,25 +407,7 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -419,6 +425,8 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -429,56 +437,9 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=y
-CONFIG_BT_HCIBPA10X=y
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -493,9 +454,7 @@ CONFIG_MAC80211_LEDS=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -506,7 +465,7 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
 
@@ -526,8 +485,10 @@ CONFIG_MTD_BLOCK=y
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -538,6 +499,10 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -546,6 +511,9 @@ CONFIG_MTD_CFI_I2=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -569,6 +537,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_OMAP2 is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
@@ -589,20 +558,21 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
+# CONFIG_OMAP_STI is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -611,14 +581,15 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
-CONFIG_EEPROM_93CX6=m
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
@@ -632,12 +603,8 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -655,34 +622,18 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
-# CONFIG_DM_UEVENT is not set
+# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
+# CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
+# CONFIG_TUN is not set
 # CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
@@ -695,7 +646,7 @@ CONFIG_PHYLIB=y
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
 # CONFIG_VITESSE_PHY is not set
-CONFIG_SMSC_PHY=y
+# CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
@@ -710,8 +661,10 @@ CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
-CONFIG_SMC911X=m
-CONFIG_SMSC911X=m
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -720,33 +673,16 @@ CONFIG_SMSC911X=m
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_USB=y
-CONFIG_LIBERTAS_SDIO=y
-CONFIG_LIBERTAS_DEBUG=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-CONFIG_USB_ZD1201=m
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-CONFIG_RTL8187=m
-# CONFIG_MAC80211_HWSIM is not set
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-# CONFIG_IWLWIFI_LEDS is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -755,41 +691,14 @@ CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 #
 # USB Network Adapters
 #
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -805,10 +714,7 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
@@ -818,47 +724,54 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -878,6 +791,7 @@ CONFIG_SERIAL_8250_RSA=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -885,6 +799,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
@@ -900,6 +815,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
@@ -925,8 +841,6 @@ CONFIG_I2C_OMAP=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -975,68 +889,8 @@ CONFIG_GPIO_TWL4030=y
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=m
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -1046,7 +900,8 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards
@@ -1077,237 +932,9 @@ CONFIG_TWL4030_CORE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_CX25840=m
-CONFIG_VIDEO_CX2341X=m
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_AU0828 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_GSPCA is not set
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-# CONFIG_USB_ET61X251 is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_ZR364XX=m
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-# CONFIG_DVB_USB_DW2102 is not set
-# CONFIG_DVB_USB_CINERGY_T2 is not set
-# CONFIG_DVB_USB_ANYSEE is not set
-# CONFIG_DVB_USB_DTV5100 is not set
-# CONFIG_DVB_USB_AF9015 is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_S5H1420=m
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-# CONFIG_DVB_TDA8261 is not set
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-# CONFIG_DVB_TUNER_CX24113 is not set
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-# CONFIG_DVB_DRX397XD is not set
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-# CONFIG_DVB_LGDT3304 is not set
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-# CONFIG_DVB_ISL6405 is not set
-CONFIG_DVB_ISL6421=m
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1336,10 +963,32 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_LCD_VGA is not set
 # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=4
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+CONFIG_PANEL_SHARP_LS037V7DW01=y
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1366,53 +1015,10 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=y
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
-# CONFIG_SND_OMAP_SOC_OVERO is not set
-CONFIG_SND_OMAP_SOC_SDP3430=y
-# CONFIG_SND_OMAP_SOC_OMAP3_PANDORA is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
+# CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-CONFIG_HID_DEBUG=y
+# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1425,35 +1031,35 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -1461,9 +1067,9 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
@@ -1476,8 +1082,12 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
@@ -1493,23 +1103,25 @@ CONFIG_USB_MUSB_SOC=y
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_USB_MUSB_HDRC_HCD=y
-CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=y
-CONFIG_USB_WDM=y
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1551,14 +1163,14 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
+CONFIG_USB_TEST=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
@@ -1574,25 +1186,29 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_USB_CDC_COMPOSITE=m
 
 #
 # OTG and related infrastructure
@@ -1601,6 +1217,7 @@ CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
@@ -1617,7 +1234,6 @@ CONFIG_SDIO_UART=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
@@ -1628,9 +1244,16 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_OMAP_DEBUG is not set
+# CONFIG_LEDS_OMAP is not set
+# CONFIG_LEDS_OMAP_PWM is not set
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1639,7 +1262,12 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1672,6 +1300,7 @@ CONFIG_RTC_DRV_TWL4030=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1703,6 +1332,7 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
@@ -1711,32 +1341,36 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
 #
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1749,16 +1383,18 @@ CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
 
 #
 # DOS/FAT/NT Filesystems
@@ -1793,15 +1429,13 @@ CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_JFFS2_CMODE_NONE is not set
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
@@ -1816,20 +1450,20 @@ CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1917,12 +1551,15 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1932,10 +1569,9 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
@@ -1950,30 +1586,20 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
+# CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
 
 #
 # Security options
@@ -1982,10 +1608,6 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
 
 #
@@ -2000,13 +1622,15 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Authenticated Encryption with Associated Data
@@ -2021,58 +1645,58 @@ CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_XTS is not set
 
 #
 # Hash modes
 #
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_MD4=m
+# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_RMD128 is not set
 # CONFIG_CRYPTO_RMD160 is not set
 # CONFIG_CRYPTO_RMD256 is not set
 # CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
 
 #
 # Ciphers
 #
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
 # Compression
 #
-CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -2080,6 +1704,7 @@ CONFIG_CRYPTO_DEFLATE=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -2087,17 +1712,16 @@ CONFIG_CRYPTO_HW=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-CONFIG_CRC7=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig
new file mode 100644
index 000000000000..e836c8a00148
--- /dev/null
+++ b/arch/arm/configs/omap_3630sdp_defconfig
@@ -0,0 +1,1611 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Thu Nov 12 12:21:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+CONFIG_MACH_OMAP_3630SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=y
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_TWL4030 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
index 23e43ea4efa1..2319113c86bf 100644
--- a/arch/arm/configs/omap_4430sdp_defconfig
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -1,26 +1,29 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Tue Jun  9 12:36:23 2009
+# Linux kernel version: 2.6.32
+# Sun Dec  6 23:37:45 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,11 +42,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -52,8 +56,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -70,7 +73,6 @@ CONFIG_UID16=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -83,6 +85,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -90,13 +96,16 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -110,7 +119,7 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -131,6 +140,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -142,8 +152,10 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -166,10 +178,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # TI OMAP Implementations
@@ -190,9 +205,12 @@ CONFIG_ARCH_OMAP4=y
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
 
 #
 # OMAP Board Type
@@ -207,7 +225,7 @@ CONFIG_CPU_32v6K=y
 CONFIG_CPU_V7=y
 CONFIG_CPU_32v7=y
 CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_PABRT_V7=y
 CONFIG_CPU_CACHE_V7=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
@@ -222,9 +240,10 @@ CONFIG_CPU_CP15_MMU=y
 # CONFIG_ARM_THUMB is not set
 # CONFIG_ARM_THUMBEE is not set
 # CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_DISABLE=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
 # CONFIG_ARM_ERRATA_430973 is not set
 # CONFIG_ARM_ERRATA_458693 is not set
 # CONFIG_ARM_ERRATA_460075 is not set
@@ -245,18 +264,20 @@ CONFIG_ARM_GIC=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
 CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
 CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_NR_CPUS=2
 # CONFIG_HOTPLUG_CPU is not set
-CONFIG_LOCAL_TIMERS=y
-# CONFIG_PREEMPT is not set
+# CONFIG_LOCAL_TIMERS is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
 CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
+CONFIG_OABI_COMPAT=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -271,10 +292,13 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
 CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -298,9 +322,11 @@ CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600
 #
 # At least one emulation must be selected
 #
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
 CONFIG_VFPv3=y
-# CONFIG_NEON is not set
+CONFIG_NEON=y
 
 #
 # Userspace binary formats
@@ -325,6 +351,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -342,6 +369,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -355,6 +383,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -427,6 +456,11 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -447,11 +481,14 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -472,21 +509,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -511,14 +535,17 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -535,9 +562,12 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -601,7 +631,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -673,23 +702,24 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_DETECT_SOFTLOCKUP is not set
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -708,31 +738,22 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -754,7 +775,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -796,11 +816,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index b9c48919a68c..9139532c3be7 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -49,8 +49,8 @@ CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index f1739fae7ed4..4b00a4306812 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -59,8 +59,8 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -202,7 +202,8 @@ CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
 # CONFIG_OMAP_LL_DEBUG_UART1 is not set
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_LL_DEBUG_NONE=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
 
@@ -609,7 +610,8 @@ CONFIG_INPUT_EVDEV=y
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
new file mode 100644
index 000000000000..0d7e37a3651b
--- /dev/null
+++ b/arch/arm/configs/omap_zoom3_defconfig
@@ -0,0 +1,1611 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Thu Nov 12 13:04:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_LL_DEBUG_NONE=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_CM_T35 is not set
+CONFIG_MACH_OMAP_ZOOM3=y
+# CONFIG_MACH_OMAP_3630SDP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=y
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_TWL4030 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
index a57f9e4124fa..b3ea2c4c0f91 100644
--- a/arch/arm/configs/overo_defconfig
+++ b/arch/arm/configs/overo_defconfig
@@ -54,8 +54,8 @@ CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index e7e31332c62a..155973426025 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -784,7 +784,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_GPIO=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
new file mode 100644
index 000000000000..15fde22ce3f3
--- /dev/null
+++ b/arch/arm/configs/u8500_defconfig
@@ -0,0 +1,680 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Mon Nov 30 11:11:29 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_ARCH_U8500=y
+CONFIG_PLAT_NOMADIK=y
+CONFIG_HAS_MTU=y
+
+#
+# ST-Ericsson platform type
+#
+
+#
+# ST-Ericsson Multicore Mobile Platforms
+#
+CONFIG_MACH_U8500_MOP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PL022=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 3d0cdd21b882..73eceb87e588 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -331,15 +331,15 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
  * Convert calls to our calling convention.
  */
 #define flush_cache_all()		__cpuc_flush_kern_all()
-#ifndef CONFIG_CPU_CACHE_VIPT
-static inline void flush_cache_mm(struct mm_struct *mm)
+
+static inline void vivt_flush_cache_mm(struct mm_struct *mm)
 {
 	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
 		__cpuc_flush_user_all();
 }
 
 static inline void
-flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
 	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
 		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
@@ -347,7 +347,7 @@ flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long
 }
 
 static inline void
-flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
 	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 		unsigned long addr = user_addr & PAGE_MASK;
@@ -356,7 +356,7 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned l
 }
 
 static inline void
-flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 			 unsigned long uaddr, void *kaddr,
 			 unsigned long len, int write)
 {
@@ -365,6 +365,16 @@ flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 		__cpuc_coherent_kern_range(addr, addr + len);
 	}
 }
+
+#ifndef CONFIG_CPU_CACHE_VIPT
+#define flush_cache_mm(mm) \
+		vivt_flush_cache_mm(mm)
+#define flush_cache_range(vma,start,end) \
+		vivt_flush_cache_range(vma,start,end)
+#define flush_cache_page(vma,addr,pfn) \
+		vivt_flush_cache_page(vma,addr,pfn)
+#define flush_ptrace_access(vma,page,ua,ka,len,write) \
+		vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
 #else
 extern void flush_cache_mm(struct mm_struct *mm);
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
@@ -408,10 +418,9 @@ extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
  * about to change to user space.  This is the same method as used on SPARC64.
  * See update_mmu_cache for the user space part.
  */
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *);
 
-extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
-
 static inline void __flush_icache_all(void)
 {
 #ifdef CONFIG_ARM_ERRATA_411920
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index ff46dfa68a97..a96300bf83fd 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -15,20 +15,15 @@
  * must not be used by drivers.
  */
 #ifndef __arch_page_to_dma
-
-#if !defined(CONFIG_HIGHMEM)
 static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
 {
-	return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
+	return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
 }
-#elif defined(__pfn_to_bus)
-static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
 {
-	return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
+	return pfn_to_page(__bus_to_pfn(addr));
 }
-#else
-#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM"
-#endif
 
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
@@ -45,6 +40,11 @@ static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
 	return __arch_page_to_dma(dev, page);
 }
 
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
+{
+	return __arch_dma_to_page(dev, addr);
+}
+
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
 	return __arch_dma_to_virt(dev, addr);
@@ -257,9 +257,11 @@ extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
  */
 extern dma_addr_t dma_map_single(struct device *, void *, size_t,
 		enum dma_data_direction);
+extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+		enum dma_data_direction);
 extern dma_addr_t dma_map_page(struct device *, struct page *,
 		unsigned long, size_t, enum dma_data_direction);
-extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+extern void dma_unmap_page(struct device *, dma_addr_t, size_t,
 		enum dma_data_direction);
 
 /*
@@ -352,7 +354,6 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 {
 	/* nothing to do */
 }
-#endif /* CONFIG_DMABOUNCE */
 
 /**
  * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
@@ -371,8 +372,9 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir)
 {
-	dma_unmap_single(dev, handle, size, dir);
+	/* nothing to do */
 }
+#endif /* CONFIG_DMABOUNCE */
 
 /**
  * dma_sync_single_range_for_cpu
diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h
new file mode 100644
index 000000000000..538f17ca905b
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cache-tauros2.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/include/asm/hardware/cache-tauros2.h
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern void __init tauros2_init(void);
diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h
new file mode 100644
index 000000000000..f82b25d4f73e
--- /dev/null
+++ b/arch/arm/include/asm/hardware/coresight.h
@@ -0,0 +1,165 @@
+/*
+ * linux/arch/arm/include/asm/hardware/coresight.h
+ *
+ * CoreSight components' registers
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_HARDWARE_CORESIGHT_H
+#define __ASM_HARDWARE_CORESIGHT_H
+
+#define TRACER_ACCESSED_BIT	0
+#define TRACER_RUNNING_BIT	1
+#define TRACER_CYCLE_ACC_BIT	2
+#define TRACER_ACCESSED		BIT(TRACER_ACCESSED_BIT)
+#define TRACER_RUNNING		BIT(TRACER_RUNNING_BIT)
+#define TRACER_CYCLE_ACC	BIT(TRACER_CYCLE_ACC_BIT)
+
+struct tracectx {
+	unsigned int	etb_bufsz;
+	void __iomem	*etb_regs;
+	void __iomem	*etm_regs;
+	unsigned long	flags;
+	int		ncmppairs;
+	int		etm_portsz;
+	struct device	*dev;
+	struct clk	*emu_clk;
+	struct mutex	mutex;
+};
+
+#define TRACER_TIMEOUT 10000
+
+#define etm_writel(t, v, x) \
+	(__raw_writel((v), (t)->etm_regs + (x)))
+#define etm_readl(t, x) (__raw_readl((t)->etm_regs + (x)))
+
+/* CoreSight Management Registers */
+#define CSMR_LOCKACCESS 0xfb0
+#define CSMR_LOCKSTATUS 0xfb4
+#define CSMR_AUTHSTATUS 0xfb8
+#define CSMR_DEVID	0xfc8
+#define CSMR_DEVTYPE	0xfcc
+/* CoreSight Component Registers */
+#define CSCR_CLASS	0xff4
+
+#define CSCR_PRSR	0x314
+
+#define UNLOCK_MAGIC	0xc5acce55
+
+/* ETM control register, "ETM Architecture", 3.3.1 */
+#define ETMR_CTRL		0
+#define ETMCTRL_POWERDOWN	1
+#define ETMCTRL_PROGRAM		(1 << 10)
+#define ETMCTRL_PORTSEL		(1 << 11)
+#define ETMCTRL_DO_CONTEXTID	(3 << 14)
+#define ETMCTRL_PORTMASK1	(7 << 4)
+#define ETMCTRL_PORTMASK2	(1 << 21)
+#define ETMCTRL_PORTMASK	(ETMCTRL_PORTMASK1 | ETMCTRL_PORTMASK2)
+#define ETMCTRL_PORTSIZE(x) ((((x) & 7) << 4) | (!!((x) & 8)) << 21)
+#define ETMCTRL_DO_CPRT		(1 << 1)
+#define ETMCTRL_DATAMASK	(3 << 2)
+#define ETMCTRL_DATA_DO_DATA	(1 << 2)
+#define ETMCTRL_DATA_DO_ADDR	(1 << 3)
+#define ETMCTRL_DATA_DO_BOTH	(ETMCTRL_DATA_DO_DATA | ETMCTRL_DATA_DO_ADDR)
+#define ETMCTRL_BRANCH_OUTPUT	(1 << 8)
+#define ETMCTRL_CYCLEACCURATE	(1 << 12)
+
+/* ETM configuration code register */
+#define ETMR_CONFCODE		(0x04)
+
+/* ETM trace start/stop resource control register */
+#define ETMR_TRACESSCTRL	(0x18)
+
+/* ETM trigger event register */
+#define ETMR_TRIGEVT		(0x08)
+
+/* address access type register bits, "ETM architecture",
+ * table 3-27 */
+/* - access type */
+#define ETMAAT_IFETCH		0
+#define ETMAAT_IEXEC		1
+#define ETMAAT_IEXECPASS	2
+#define ETMAAT_IEXECFAIL	3
+#define ETMAAT_DLOADSTORE	4
+#define ETMAAT_DLOAD		5
+#define ETMAAT_DSTORE		6
+/* - comparison access size */
+#define ETMAAT_JAVA		(0 << 3)
+#define ETMAAT_THUMB		(1 << 3)
+#define ETMAAT_ARM		(3 << 3)
+/* - data value comparison control */
+#define ETMAAT_NOVALCMP		(0 << 5)
+#define ETMAAT_VALMATCH		(1 << 5)
+#define ETMAAT_VALNOMATCH	(3 << 5)
+/* - exact match */
+#define ETMAAT_EXACTMATCH	(1 << 7)
+/* - context id comparator control */
+#define ETMAAT_IGNCONTEXTID	(0 << 8)
+#define ETMAAT_VALUE1		(1 << 8)
+#define ETMAAT_VALUE2		(2 << 8)
+#define ETMAAT_VALUE3		(3 << 8)
+/* - security level control */
+#define ETMAAT_IGNSECURITY	(0 << 10)
+#define ETMAAT_NSONLY		(1 << 10)
+#define ETMAAT_SONLY		(2 << 10)
+
+#define ETMR_COMP_VAL(x)	(0x40 + (x) * 4)
+#define ETMR_COMP_ACC_TYPE(x)	(0x80 + (x) * 4)
+
+/* ETM status register, "ETM Architecture", 3.3.2 */
+#define ETMR_STATUS		(0x10)
+#define ETMST_OVERFLOW		(1 << 0)
+#define ETMST_PROGBIT		(1 << 1)
+#define ETMST_STARTSTOP		(1 << 2)
+#define ETMST_TRIGGER		(1 << 3)
+
+#define etm_progbit(t)		(etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT)
+#define etm_started(t)		(etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP)
+#define etm_triggered(t)	(etm_readl((t), ETMR_STATUS) & ETMST_TRIGGER)
+
+#define ETMR_TRACEENCTRL2	0x1c
+#define ETMR_TRACEENCTRL	0x24
+#define ETMTE_INCLEXCL		(1 << 24)
+#define ETMR_TRACEENEVT		0x20
+#define ETMCTRL_OPTS		(ETMCTRL_DO_CPRT | \
+				ETMCTRL_DATA_DO_ADDR | \
+				ETMCTRL_BRANCH_OUTPUT | \
+				ETMCTRL_DO_CONTEXTID)
+
+/* ETB registers, "CoreSight Components TRM", 9.3 */
+#define ETBR_DEPTH		0x04
+#define ETBR_STATUS		0x0c
+#define ETBR_READMEM		0x10
+#define ETBR_READADDR		0x14
+#define ETBR_WRITEADDR		0x18
+#define ETBR_TRIGGERCOUNT	0x1c
+#define ETBR_CTRL		0x20
+#define ETBR_FORMATTERCTRL	0x304
+#define ETBFF_ENFTC		1
+#define ETBFF_ENFCONT		(1 << 1)
+#define ETBFF_FONFLIN		(1 << 4)
+#define ETBFF_MANUAL_FLUSH	(1 << 6)
+#define ETBFF_TRIGIN		(1 << 8)
+#define ETBFF_TRIGEVT		(1 << 9)
+#define ETBFF_TRIGFL		(1 << 10)
+
+#define etb_writel(t, v, x) \
+	(__raw_writel((v), (t)->etb_regs + (x)))
+#define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x)))
+
+#define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0)
+#define etm_unlock(t) \
+	do { etm_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
+
+#define etb_lock(t) do { etb_writel((t), 0, CSMR_LOCKACCESS); } while (0)
+#define etb_unlock(t) \
+	do { etb_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
+
+#endif /* __ASM_HARDWARE_CORESIGHT_H */
+
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 8d60ad267e3a..5daea2961d48 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -234,7 +234,13 @@ extern int iop3xx_get_init_atu(void);
 void iop3xx_map_io(void);
 void iop_init_cp6_handler(void);
 void iop_init_time(unsigned long tickrate);
-unsigned long iop_gettimeoffset(void);
+
+static inline u32 read_tmr0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val));
+	return val;
+}
 
 static inline void write_tmr0(u32 val)
 {
@@ -253,6 +259,11 @@ static inline u32 read_tcr0(void)
 	return val;
 }
 
+static inline void write_tcr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val));
+}
+
 static inline u32 read_tcr1(void)
 {
 	u32 val;
@@ -260,6 +271,11 @@ static inline u32 read_tcr1(void)
 	return val;
 }
 
+static inline void write_tcr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val));
+}
+
 static inline void write_trr0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index cefedf062138..5421d82a2572 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -125,8 +125,10 @@
  * private definitions which should NOT be used outside memory.h
  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
  */
+#ifndef __virt_to_phys
 #define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
 
 /*
  * Convert a physical address to a Page Frame Number and back
@@ -134,6 +136,12 @@
 #define	__phys_to_pfn(paddr)	((paddr) >> PAGE_SHIFT)
 #define	__pfn_to_phys(pfn)	((pfn) << PAGE_SHIFT)
 
+/*
+ * Convert a page to/from a physical address
+ */
+#define page_to_phys(page)	(__pfn_to_phys(page_to_pfn(page)))
+#define phys_to_page(phys)	(pfn_to_page(__phys_to_pfn(phys)))
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -194,7 +202,8 @@ static inline void *phys_to_virt(unsigned long x)
 #ifndef __virt_to_bus
 #define __virt_to_bus	__virt_to_phys
 #define __bus_to_virt	__phys_to_virt
-#define __pfn_to_bus(x)	((x) << PAGE_SHIFT)
+#define __pfn_to_bus(x)	__pfn_to_phys(x)
+#define __bus_to_pfn(x)	__phys_to_pfn(x)
 #endif
 
 static inline __deprecated unsigned long virt_to_bus(void *x)
@@ -293,11 +302,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 #endif /* !CONFIG_DISCONTIGMEM */
 
 /*
- * For BIO.  "will die".  Kill me when bio_to_phys() and bvec_to_phys() die.
- */
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-
-/*
  * Optional coherency support.  Currently used only by selected
  * Intel XSC3-based systems.
  */
diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h
index 8eebf89f5ab1..41f99c573b93 100644
--- a/arch/arm/include/asm/mman.h
+++ b/arch/arm/include/asm/mman.h
@@ -1 +1,4 @@
 #include <asm-generic/mman.h>
+
+#define arch_mmap_check(addr, len, flags) \
+	(((flags) & MAP_FIXED && (addr) < FIRST_USER_ADDRESS) ? -EINVAL : 0)
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 201ccaa11f61..11397687f42c 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -304,13 +304,23 @@ PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
 
 static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 
+#define __pgprot_modify(prot,mask,bits)		\
+	__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
+
 /*
  * Mark the prot value as uncacheable and unbufferable.
  */
 #define pgprot_noncached(prot) \
-	__pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_UNCACHED)
+	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
 #define pgprot_writecombine(prot) \
-	__pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_BUFFERABLE)
+	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#if __LINUX_ARM_ARCH__ >= 7
+#define pgprot_dmacoherent(prot) \
+	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
+#else
+#define pgprot_dmacoherent(prot) \
+	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
+#endif
 
 #define pmd_none(pmd)		(!pmd_val(pmd))
 #define pmd_present(pmd)	(pmd_val(pmd))
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 92ac61d294fd..90ffd04b8e74 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h
index ca2bf2f6d6ea..9997ad20eff1 100644
--- a/arch/arm/include/asm/swab.h
+++ b/arch/arm/include/asm/swab.h
@@ -22,6 +22,24 @@
 #  define __SWAB_64_THRU_32__
 #endif
 
+#if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6
+
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+	__asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
+	return x;
+}
+#define __arch_swab16 __arch_swab16
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+	__asm__ ("rev %0, %1" : "=r" (x) : "r" (x));
+	return x;
+}
+#define __arch_swab32 __arch_swab32
+
+#else
+
 static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
 	__u32 t;
@@ -48,3 +66,4 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 
 #endif
 
+#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index d65b2f5bf41f..058e7e90881d 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -138,21 +138,26 @@ extern unsigned int user_debug;
 #define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
 
-#ifndef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#define mb()		dmb()
+#define rmb()		dmb()
+#define wmb()		dmb()
+#else
 #define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define wmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#endif
+
+#ifndef CONFIG_SMP
 #define smp_mb()	barrier()
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
 #else
-#define mb()		dmb()
-#define rmb()		dmb()
-#define wmb()		dmb()
-#define smp_mb()	dmb()
-#define smp_rmb()	dmb()
-#define smp_wmb()	dmb()
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
 #endif
+
 #define read_barrier_depends()		do { } while(0)
 #define smp_read_barrier_depends()	do { } while(0)
 
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 79087dd6d869..e7ccf7e697ce 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,6 +17,8 @@ obj-y		:= compat.o elf.o entry-armv.o entry-common.o irq.o \
 		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
+obj-$(CONFIG_OC_ETM)		+= etm.o
+
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_ARCH_ACORN)	+= ecard.o 
 obj-$(CONFIG_FIQ)		+= fiq.o
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index fafce1b5c69f..9314a2d681f1 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -172,7 +172,7 @@
 /* 160 */	CALL(sys_sched_get_priority_min)
 		CALL(sys_sched_rr_get_interval)
 		CALL(sys_nanosleep)
-		CALL(sys_arm_mremap)
+		CALL(sys_mremap)
 		CALL(sys_setresuid16)
 /* 165 */	CALL(sys_getresuid16)
 		CALL(sys_ni_syscall)		/* vm86 */
@@ -374,6 +374,7 @@
 		CALL(sys_pwritev)
 		CALL(sys_rt_tgsigqueueinfo)
 		CALL(sys_perf_event_open)
+/* 365 */	CALL(sys_recvmmsg)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index f0fe95b7085d..2c1db77d7848 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -416,12 +416,12 @@ sys_mmap2:
 		tst	r5, #PGOFF_MASK
 		moveq	r5, r5, lsr #PAGE_SHIFT - 12
 		streq	r5, [sp, #4]
-		beq	do_mmap2
+		beq	sys_mmap_pgoff
 		mov	r0, #-EINVAL
 		mov	pc, lr
 #else
 		str	r5, [sp, #4]
-		b	do_mmap2
+		b	sys_mmap_pgoff
 #endif
 ENDPROC(sys_mmap2)
 
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
new file mode 100644
index 000000000000..827753966301
--- /dev/null
+++ b/arch/arm/kernel/etm.c
@@ -0,0 +1,641 @@
+/*
+ * linux/arch/arm/kernel/etm.c
+ *
+ * Driver for ARM's Embedded Trace Macrocell and Embedded Trace Buffer.
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/amba/bus.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/mutex.h>
+#include <asm/hardware/coresight.h>
+#include <asm/sections.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shishkin");
+
+static struct tracectx tracer;
+
+static inline bool trace_isrunning(struct tracectx *t)
+{
+	return !!(t->flags & TRACER_RUNNING);
+}
+
+static int etm_setup_address_range(struct tracectx *t, int n,
+		unsigned long start, unsigned long end, int exclude, int data)
+{
+	u32 flags = ETMAAT_ARM | ETMAAT_IGNCONTEXTID | ETMAAT_NSONLY | \
+		    ETMAAT_NOVALCMP;
+
+	if (n < 1 || n > t->ncmppairs)
+		return -EINVAL;
+
+	/* comparators and ranges are numbered starting with 1 as opposed
+	 * to bits in a word */
+	n--;
+
+	if (data)
+		flags |= ETMAAT_DLOADSTORE;
+	else
+		flags |= ETMAAT_IEXEC;
+
+	/* first comparator for the range */
+	etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2));
+	etm_writel(t, start, ETMR_COMP_VAL(n * 2));
+
+	/* second comparator is right next to it */
+	etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2 + 1));
+	etm_writel(t, end, ETMR_COMP_VAL(n * 2 + 1));
+
+	flags = exclude ? ETMTE_INCLEXCL : 0;
+	etm_writel(t, flags | (1 << n), ETMR_TRACEENCTRL);
+
+	return 0;
+}
+
+static int trace_start(struct tracectx *t)
+{
+	u32 v;
+	unsigned long timeout = TRACER_TIMEOUT;
+
+	etb_unlock(t);
+
+	etb_writel(t, 0, ETBR_FORMATTERCTRL);
+	etb_writel(t, 1, ETBR_CTRL);
+
+	etb_lock(t);
+
+	/* configure etm */
+	v = ETMCTRL_OPTS | ETMCTRL_PROGRAM | ETMCTRL_PORTSIZE(t->etm_portsz);
+
+	if (t->flags & TRACER_CYCLE_ACC)
+		v |= ETMCTRL_CYCLEACCURATE;
+
+	etm_unlock(t);
+
+	etm_writel(t, v, ETMR_CTRL);
+
+	while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout)
+		;
+	if (!timeout) {
+		dev_dbg(t->dev, "Waiting for progbit to assert timed out\n");
+		etm_lock(t);
+		return -EFAULT;
+	}
+
+	etm_setup_address_range(t, 1, (unsigned long)_stext,
+			(unsigned long)_etext, 0, 0);
+	etm_writel(t, 0, ETMR_TRACEENCTRL2);
+	etm_writel(t, 0, ETMR_TRACESSCTRL);
+	etm_writel(t, 0x6f, ETMR_TRACEENEVT);
+
+	v &= ~ETMCTRL_PROGRAM;
+	v |= ETMCTRL_PORTSEL;
+
+	etm_writel(t, v, ETMR_CTRL);
+
+	timeout = TRACER_TIMEOUT;
+	while (etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM && --timeout)
+		;
+	if (!timeout) {
+		dev_dbg(t->dev, "Waiting for progbit to deassert timed out\n");
+		etm_lock(t);
+		return -EFAULT;
+	}
+
+	etm_lock(t);
+
+	t->flags |= TRACER_RUNNING;
+
+	return 0;
+}
+
+static int trace_stop(struct tracectx *t)
+{
+	unsigned long timeout = TRACER_TIMEOUT;
+
+	etm_unlock(t);
+
+	etm_writel(t, 0x440, ETMR_CTRL);
+	while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout)
+		;
+	if (!timeout) {
+		dev_dbg(t->dev, "Waiting for progbit to assert timed out\n");
+		etm_lock(t);
+		return -EFAULT;
+	}
+
+	etm_lock(t);
+
+	etb_unlock(t);
+	etb_writel(t, ETBFF_MANUAL_FLUSH, ETBR_FORMATTERCTRL);
+
+	timeout = TRACER_TIMEOUT;
+	while (etb_readl(t, ETBR_FORMATTERCTRL) &
+			ETBFF_MANUAL_FLUSH && --timeout)
+		;
+	if (!timeout) {
+		dev_dbg(t->dev, "Waiting for formatter flush to commence "
+				"timed out\n");
+		etb_lock(t);
+		return -EFAULT;
+	}
+
+	etb_writel(t, 0, ETBR_CTRL);
+
+	etb_lock(t);
+
+	t->flags &= ~TRACER_RUNNING;
+
+	return 0;
+}
+
+static int etb_getdatalen(struct tracectx *t)
+{
+	u32 v;
+	int rp, wp;
+
+	v = etb_readl(t, ETBR_STATUS);
+
+	if (v & 1)
+		return t->etb_bufsz;
+
+	rp = etb_readl(t, ETBR_READADDR);
+	wp = etb_readl(t, ETBR_WRITEADDR);
+
+	if (rp > wp) {
+		etb_writel(t, 0, ETBR_READADDR);
+		etb_writel(t, 0, ETBR_WRITEADDR);
+
+		return 0;
+	}
+
+	return wp - rp;
+}
+
+/* sysrq+v will always stop the running trace and leave it at that */
+static void etm_dump(void)
+{
+	struct tracectx *t = &tracer;
+	u32 first = 0;
+	int length;
+
+	if (!t->etb_regs) {
+		printk(KERN_INFO "No tracing hardware found\n");
+		return;
+	}
+
+	if (trace_isrunning(t))
+		trace_stop(t);
+
+	etb_unlock(t);
+
+	length = etb_getdatalen(t);
+
+	if (length == t->etb_bufsz)
+		first = etb_readl(t, ETBR_WRITEADDR);
+
+	etb_writel(t, first, ETBR_READADDR);
+
+	printk(KERN_INFO "Trace buffer contents length: %d\n", length);
+	printk(KERN_INFO "--- ETB buffer begin ---\n");
+	for (; length; length--)
+		printk("%08x", cpu_to_be32(etb_readl(t, ETBR_READMEM)));
+	printk(KERN_INFO "\n--- ETB buffer end ---\n");
+
+	/* deassert the overflow bit */
+	etb_writel(t, 1, ETBR_CTRL);
+	etb_writel(t, 0, ETBR_CTRL);
+
+	etb_writel(t, 0, ETBR_TRIGGERCOUNT);
+	etb_writel(t, 0, ETBR_READADDR);
+	etb_writel(t, 0, ETBR_WRITEADDR);
+
+	etb_lock(t);
+}
+
+static void sysrq_etm_dump(int key, struct tty_struct *tty)
+{
+	dev_dbg(tracer.dev, "Dumping ETB buffer\n");
+	etm_dump();
+}
+
+static struct sysrq_key_op sysrq_etm_op = {
+	.handler = sysrq_etm_dump,
+	.help_msg = "ETM buffer dump",
+	.action_msg = "etm",
+};
+
+static int etb_open(struct inode *inode, struct file *file)
+{
+	if (!tracer.etb_regs)
+		return -ENODEV;
+
+	file->private_data = &tracer;
+
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t etb_read(struct file *file, char __user *data,
+		size_t len, loff_t *ppos)
+{
+	int total, i;
+	long length;
+	struct tracectx *t = file->private_data;
+	u32 first = 0;
+	u32 *buf;
+
+	mutex_lock(&t->mutex);
+
+	if (trace_isrunning(t)) {
+		length = 0;
+		goto out;
+	}
+
+	etb_unlock(t);
+
+	total = etb_getdatalen(t);
+	if (total == t->etb_bufsz)
+		first = etb_readl(t, ETBR_WRITEADDR);
+
+	etb_writel(t, first, ETBR_READADDR);
+
+	length = min(total * 4, (int)len);
+	buf = vmalloc(length);
+
+	dev_dbg(t->dev, "ETB buffer length: %d\n", total);
+	dev_dbg(t->dev, "ETB status reg: %x\n", etb_readl(t, ETBR_STATUS));
+	for (i = 0; i < length / 4; i++)
+		buf[i] = etb_readl(t, ETBR_READMEM);
+
+	/* the only way to deassert overflow bit in ETB status is this */
+	etb_writel(t, 1, ETBR_CTRL);
+	etb_writel(t, 0, ETBR_CTRL);
+
+	etb_writel(t, 0, ETBR_WRITEADDR);
+	etb_writel(t, 0, ETBR_READADDR);
+	etb_writel(t, 0, ETBR_TRIGGERCOUNT);
+
+	etb_lock(t);
+
+	length -= copy_to_user(data, buf, length);
+	vfree(buf);
+
+out:
+	mutex_unlock(&t->mutex);
+
+	return length;
+}
+
+static int etb_release(struct inode *inode, struct file *file)
+{
+	/* there's nothing to do here, actually */
+	return 0;
+}
+
+static const struct file_operations etb_fops = {
+	.owner = THIS_MODULE,
+	.read = etb_read,
+	.open = etb_open,
+	.release = etb_release,
+};
+
+static struct miscdevice etb_miscdev = {
+	.name = "tracebuf",
+	.minor = 0,
+	.fops = &etb_fops,
+};
+
+static int __init etb_probe(struct amba_device *dev, struct amba_id *id)
+{
+	struct tracectx *t = &tracer;
+	int ret = 0;
+
+	ret = amba_request_regions(dev, NULL);
+	if (ret)
+		goto out;
+
+	t->etb_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res));
+	if (!t->etb_regs) {
+		ret = -ENOMEM;
+		goto out_release;
+	}
+
+	amba_set_drvdata(dev, t);
+
+	etb_miscdev.parent = &dev->dev;
+
+	ret = misc_register(&etb_miscdev);
+	if (ret)
+		goto out_unmap;
+
+	t->emu_clk = clk_get(&dev->dev, "emu_src_ck");
+	if (IS_ERR(t->emu_clk)) {
+		dev_dbg(&dev->dev, "Failed to obtain emu_src_ck.\n");
+		return -EFAULT;
+	}
+
+	clk_enable(t->emu_clk);
+
+	etb_unlock(t);
+	t->etb_bufsz = etb_readl(t, ETBR_DEPTH);
+	dev_dbg(&dev->dev, "Size: %x\n", t->etb_bufsz);
+
+	/* make sure trace capture is disabled */
+	etb_writel(t, 0, ETBR_CTRL);
+	etb_writel(t, 0x1000, ETBR_FORMATTERCTRL);
+	etb_lock(t);
+
+	dev_dbg(&dev->dev, "ETB AMBA driver initialized.\n");
+
+out:
+	return ret;
+
+out_unmap:
+	amba_set_drvdata(dev, NULL);
+	iounmap(t->etb_regs);
+
+out_release:
+	amba_release_regions(dev);
+
+	return ret;
+}
+
+static int etb_remove(struct amba_device *dev)
+{
+	struct tracectx *t = amba_get_drvdata(dev);
+
+	amba_set_drvdata(dev, NULL);
+
+	iounmap(t->etb_regs);
+	t->etb_regs = NULL;
+
+	clk_disable(t->emu_clk);
+	clk_put(t->emu_clk);
+
+	amba_release_regions(dev);
+
+	return 0;
+}
+
+static struct amba_id etb_ids[] = {
+	{
+		.id	= 0x0003b907,
+		.mask	= 0x0007ffff,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver etb_driver = {
+	.drv		= {
+		.name	= "etb",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= etb_probe,
+	.remove		= etb_remove,
+	.id_table	= etb_ids,
+};
+
+/* use a sysfs file "trace_running" to start/stop tracing */
+static ssize_t trace_running_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	return sprintf(buf, "%x\n", trace_isrunning(&tracer));
+}
+
+static ssize_t trace_running_store(struct kobject *kobj,
+				   struct kobj_attribute *attr,
+				   const char *buf, size_t n)
+{
+	unsigned int value;
+	int ret;
+
+	if (sscanf(buf, "%u", &value) != 1)
+		return -EINVAL;
+
+	mutex_lock(&tracer.mutex);
+	ret = value ? trace_start(&tracer) : trace_stop(&tracer);
+	mutex_unlock(&tracer.mutex);
+
+	return ret ? : n;
+}
+
+static struct kobj_attribute trace_running_attr =
+	__ATTR(trace_running, 0644, trace_running_show, trace_running_store);
+
+static ssize_t trace_info_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	u32 etb_wa, etb_ra, etb_st, etb_fc, etm_ctrl, etm_st;
+	int datalen;
+
+	etb_unlock(&tracer);
+	datalen = etb_getdatalen(&tracer);
+	etb_wa = etb_readl(&tracer, ETBR_WRITEADDR);
+	etb_ra = etb_readl(&tracer, ETBR_READADDR);
+	etb_st = etb_readl(&tracer, ETBR_STATUS);
+	etb_fc = etb_readl(&tracer, ETBR_FORMATTERCTRL);
+	etb_lock(&tracer);
+
+	etm_unlock(&tracer);
+	etm_ctrl = etm_readl(&tracer, ETMR_CTRL);
+	etm_st = etm_readl(&tracer, ETMR_STATUS);
+	etm_lock(&tracer);
+
+	return sprintf(buf, "Trace buffer len: %d\nComparator pairs: %d\n"
+			"ETBR_WRITEADDR:\t%08x\n"
+			"ETBR_READADDR:\t%08x\n"
+			"ETBR_STATUS:\t%08x\n"
+			"ETBR_FORMATTERCTRL:\t%08x\n"
+			"ETMR_CTRL:\t%08x\n"
+			"ETMR_STATUS:\t%08x\n",
+			datalen,
+			tracer.ncmppairs,
+			etb_wa,
+			etb_ra,
+			etb_st,
+			etb_fc,
+			etm_ctrl,
+			etm_st
+			);
+}
+
+static struct kobj_attribute trace_info_attr =
+	__ATTR(trace_info, 0444, trace_info_show, NULL);
+
+static ssize_t trace_mode_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	return sprintf(buf, "%d %d\n",
+			!!(tracer.flags & TRACER_CYCLE_ACC),
+			tracer.etm_portsz);
+}
+
+static ssize_t trace_mode_store(struct kobject *kobj,
+				   struct kobj_attribute *attr,
+				   const char *buf, size_t n)
+{
+	unsigned int cycacc, portsz;
+
+	if (sscanf(buf, "%u %u", &cycacc, &portsz) != 2)
+		return -EINVAL;
+
+	mutex_lock(&tracer.mutex);
+	if (cycacc)
+		tracer.flags |= TRACER_CYCLE_ACC;
+	else
+		tracer.flags &= ~TRACER_CYCLE_ACC;
+
+	tracer.etm_portsz = portsz & 0x0f;
+	mutex_unlock(&tracer.mutex);
+
+	return n;
+}
+
+static struct kobj_attribute trace_mode_attr =
+	__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
+
+static int __init etm_probe(struct amba_device *dev, struct amba_id *id)
+{
+	struct tracectx *t = &tracer;
+	int ret = 0;
+
+	if (t->etm_regs) {
+		dev_dbg(&dev->dev, "ETM already initialized\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = amba_request_regions(dev, NULL);
+	if (ret)
+		goto out;
+
+	t->etm_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res));
+	if (!t->etm_regs) {
+		ret = -ENOMEM;
+		goto out_release;
+	}
+
+	amba_set_drvdata(dev, t);
+
+	mutex_init(&t->mutex);
+	t->dev = &dev->dev;
+	t->flags = TRACER_CYCLE_ACC;
+	t->etm_portsz = 1;
+
+	etm_unlock(t);
+	ret = etm_readl(t, CSCR_PRSR);
+
+	t->ncmppairs = etm_readl(t, ETMR_CONFCODE) & 0xf;
+	etm_writel(t, 0x440, ETMR_CTRL);
+	etm_lock(t);
+
+	ret = sysfs_create_file(&dev->dev.kobj,
+			&trace_running_attr.attr);
+	if (ret)
+		goto out_unmap;
+
+	/* failing to create any of these two is not fatal */
+	ret = sysfs_create_file(&dev->dev.kobj, &trace_info_attr.attr);
+	if (ret)
+		dev_dbg(&dev->dev, "Failed to create trace_info in sysfs\n");
+
+	ret = sysfs_create_file(&dev->dev.kobj, &trace_mode_attr.attr);
+	if (ret)
+		dev_dbg(&dev->dev, "Failed to create trace_mode in sysfs\n");
+
+	dev_dbg(t->dev, "ETM AMBA driver initialized.\n");
+
+out:
+	return ret;
+
+out_unmap:
+	amba_set_drvdata(dev, NULL);
+	iounmap(t->etm_regs);
+
+out_release:
+	amba_release_regions(dev);
+
+	return ret;
+}
+
+static int etm_remove(struct amba_device *dev)
+{
+	struct tracectx *t = amba_get_drvdata(dev);
+
+	amba_set_drvdata(dev, NULL);
+
+	iounmap(t->etm_regs);
+	t->etm_regs = NULL;
+
+	amba_release_regions(dev);
+
+	sysfs_remove_file(&dev->dev.kobj, &trace_running_attr.attr);
+	sysfs_remove_file(&dev->dev.kobj, &trace_info_attr.attr);
+	sysfs_remove_file(&dev->dev.kobj, &trace_mode_attr.attr);
+
+	return 0;
+}
+
+static struct amba_id etm_ids[] = {
+	{
+		.id	= 0x0003b921,
+		.mask	= 0x0007ffff,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver etm_driver = {
+	.drv		= {
+		.name   = "etm",
+		.owner  = THIS_MODULE,
+	},
+	.probe		= etm_probe,
+	.remove		= etm_remove,
+	.id_table	= etm_ids,
+};
+
+static int __init etm_init(void)
+{
+	int retval;
+
+	retval = amba_driver_register(&etb_driver);
+	if (retval) {
+		printk(KERN_ERR "Failed to register etb\n");
+		return retval;
+	}
+
+	retval = amba_driver_register(&etm_driver);
+	if (retval) {
+		amba_driver_unregister(&etb_driver);
+		printk(KERN_ERR "Failed to probe etm\n");
+		return retval;
+	}
+
+	/* not being able to install this handler is not fatal */
+	(void)register_sysrq_key('v', &sysrq_etm_op);
+
+	return 0;
+}
+
+device_initcall(etm_init);
+
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index e5dfc2895e24..573b803dc6bf 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -32,7 +32,7 @@
  * numbers for r1.
  *
  */
-	.section ".text.head", "ax"
+	__HEAD
 ENTRY(stext)
 	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 38ccbe1d3b2c..eb62bf947212 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -74,7 +74,7 @@
  * crap here - that's what the boot loader (or in extreme, well justified
  * circumstances, zImage) is for.
  */
-	.section ".text.head", "ax"
+	__HEAD
 ENTRY(stext)
 	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c
index 8ac9b8424007..346485910732 100644
--- a/arch/arm/kernel/isa.c
+++ b/arch/arm/kernel/isa.c
@@ -22,47 +22,42 @@ static unsigned int isa_membase, isa_portbase, isa_portshift;
 
 static ctl_table ctl_isa_vars[4] = {
 	{
-		.ctl_name	= BUS_ISA_MEM_BASE,
 		.procname	= "membase",
 		.data		= &isa_membase, 
 		.maxlen		= sizeof(isa_membase),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	}, {
-		.ctl_name	= BUS_ISA_PORT_BASE,
 		.procname	= "portbase",
 		.data		= &isa_portbase, 
 		.maxlen		= sizeof(isa_portbase),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	}, {
-		.ctl_name	= BUS_ISA_PORT_SHIFT,
 		.procname	= "portshift",
 		.data		= &isa_portshift, 
 		.maxlen		= sizeof(isa_portshift),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
-	}, {0}
+		.proc_handler	= proc_dointvec,
+	}, {}
 };
 
 static struct ctl_table_header *isa_sysctl_header;
 
 static ctl_table ctl_isa[2] = {
 	{
-		.ctl_name	= CTL_BUS_ISA,
 		.procname	= "isa",
 		.mode		= 0555,
 		.child		= ctl_isa_vars,
-	}, {0}
+	}, {}
 };
 
 static ctl_table ctl_bus[2] = {
 	{
-		.ctl_name	= CTL_BUS,
 		.procname	= "bus",
 		.mode		= 0555,
 		.child		= ctl_isa,
-	}, {0}
+	}, {}
 };
 
 void __init
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 78ecaac65206..ae4027bd01bd 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -28,41 +28,6 @@
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
 
-extern unsigned long do_mremap(unsigned long addr, unsigned long old_len,
-			       unsigned long new_len, unsigned long flags,
-			       unsigned long new_addr);
-
-/* common code for old and new mmaps */
-inline long do_mmap2(
-	unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long pgoff)
-{
-	int error = -EINVAL;
-	struct file * file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	if (flags & MAP_FIXED && addr < FIRST_USER_ADDRESS)
-		goto out;
-
-	error = -EBADF;
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
 struct mmap_arg_struct {
 	unsigned long addr;
 	unsigned long len;
@@ -84,29 +49,11 @@ asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
 	if (a.offset & ~PAGE_MASK)
 		goto out;
 
-	error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
+	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
 out:
 	return error;
 }
 
-asmlinkage unsigned long
-sys_arm_mremap(unsigned long addr, unsigned long old_len,
-	       unsigned long new_len, unsigned long flags,
-	       unsigned long new_addr)
-{
-	unsigned long ret = -EINVAL;
-
-	if (flags & MREMAP_FIXED && new_addr < FIRST_USER_ADDRESS)
-		goto out;
-
-	down_write(&current->mm->mmap_sem);
-	ret = do_mremap(addr, old_len, new_len, flags, new_addr);
-	up_write(&current->mm->mmap_sem);
-
-out:
-	return ret;
-}
-
 /*
  * Perform the select(nd, in, out, ex, tv) and mmap() system
  * calls.
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index aecf87dfbaec..71151bd87a36 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -24,13 +24,11 @@ SECTIONS
 #else
 	. = PAGE_OFFSET + TEXT_OFFSET;
 #endif
-	.text.head : {
-		_stext = .;
-		_sinittext = .;
-		*(.text.head)
-	}
 
 	.init : {			/* Init code and data		*/
+		_stext = .;
+		_sinittext = .;
+			HEAD_TEXT
 			INIT_TEXT
 		_einittext = .;
 		__proc_info_begin = .;
@@ -42,43 +40,31 @@ SECTIONS
 		__tagtable_begin = .;
 			*(.taglist.init)
 		__tagtable_end = .;
-		. = ALIGN(16);
-		__setup_start = .;
-			*(.init.setup)
-		__setup_end = .;
+
+		INIT_SETUP(16)
+
 		__early_begin = .;
 			*(.early_param.init)
 		__early_end = .;
-		__initcall_start = .;
-			INITCALLS
-		__initcall_end = .;
-		__con_initcall_start = .;
-			*(.con_initcall.init)
-		__con_initcall_end = .;
-		__security_initcall_start = .;
-			*(.security_initcall.init)
-		__security_initcall_end = .;
-#ifdef CONFIG_BLK_DEV_INITRD
-		. = ALIGN(32);
-		__initramfs_start = .;
-			usr/built-in.o(.init.ramfs)
-		__initramfs_end = .;
-#endif
-		. = ALIGN(PAGE_SIZE);
-		__per_cpu_load = .;
-		__per_cpu_start = .;
-			*(.data.percpu.page_aligned)
-			*(.data.percpu)
-			*(.data.percpu.shared_aligned)
-		__per_cpu_end = .;
+
+		INIT_CALLS
+		CON_INITCALL
+		SECURITY_INITCALL
+		INIT_RAM_FS
+
 #ifndef CONFIG_XIP_KERNEL
 		__init_begin = _stext;
 		INIT_DATA
-		. = ALIGN(PAGE_SIZE);
-		__init_end = .;
 #endif
 	}
 
+	PERCPU(PAGE_SIZE)
+
+#ifndef CONFIG_XIP_KERNEL
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
+#endif
+
 	/DISCARD/ : {			/* Exit code and data		*/
 		EXIT_TEXT
 		EXIT_DATA
@@ -157,7 +143,7 @@ SECTIONS
 		 * first, the init task union, aligned
 		 * to an 8192 byte boundary.
 		 */
-		*(.data.init_task)
+		INIT_TASK_DATA(THREAD_SIZE)
 
 #ifdef CONFIG_XIP_KERNEL
 		. = ALIGN(PAGE_SIZE);
@@ -167,17 +153,8 @@ SECTIONS
 		__init_end = .;
 #endif
 
-		. = ALIGN(PAGE_SIZE);
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
-
-		/*
-		 * then the cacheline aligned data
-		 */
-		. = ALIGN(32);
-		*(.data.cacheline_aligned)
+		NOSAVE_DATA
+		CACHELINE_ALIGNED_DATA(32)
 
 		/*
 		 * The exception fixup table (might need resorting at runtime)
@@ -256,20 +233,10 @@ SECTIONS
 	}
 #endif
 
-	.bss : {
-		__bss_start = .;	/* BSS				*/
-		*(.bss)
-		*(COMMON)
-		__bss_stop = .;
-		_end = .;
-	}
-					/* Stabs debugging sections.	*/
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
+	BSS_SECTION(0, 0, 0)
+	_end = .;
+
+	STABS_DEBUG
 	.comment 0 : { *(.comment) }
 }
 
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2fd88437348b..0b2ee953f164 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,5 +1,20 @@
 if ARCH_AT91
 
+config HAVE_AT91_DATAFLASH_CARD
+	bool
+
+config HAVE_NAND_ATMEL_BUSWIDTH_16
+	bool
+
+config HAVE_AT91_USART3
+	bool
+
+config HAVE_AT91_USART4
+	bool
+
+config HAVE_AT91_USART5
+	bool
+
 menu "Atmel AT91 System-on-Chip"
 
 choice
@@ -10,54 +25,69 @@ config ARCH_AT91RM9200
 	select CPU_ARM920T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
 
 config ARCH_AT91SAM9260
 	bool "AT91SAM9260 or AT91SAM9XE"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_AT91_USART4
+	select HAVE_AT91_USART5
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9G10
 	bool "AT91SAM9G10"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_AT91_USART4
+	select HAVE_AT91_USART5
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91X40
 	bool "AT91x40"
@@ -76,93 +106,88 @@ comment "AT91RM9200 Board Type"
 
 config MACH_ONEARM
 	bool "Ajeco 1ARM Single Board Computer"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Ajeco's 1ARM Single Board Computer.
 	  <http://www.ajeco.fi/products.htm>
 
 config ARCH_AT91RM9200DK
 	bool "Atmel AT91RM9200-DK Development board"
-	depends on ARCH_AT91RM9200
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using Atmel's AT91RM9200-DK Development board.
 	  (Discontinued)
 
 config MACH_AT91RM9200EK
 	bool "Atmel AT91RM9200-EK Evaluation Kit"
-	depends on ARCH_AT91RM9200
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
 
 config MACH_CSB337
 	bool "Cogent CSB337"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Cogent's CSB337 board.
 	  <http://www.cogcomp.com/csb_csb337.htm>
 
 config MACH_CSB637
 	bool "Cogent CSB637"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Cogent's CSB637 board.
 	  <http://www.cogcomp.com/csb_csb637.htm>
 
 config MACH_CARMEVA
 	bool "Conitec ARM&EVA"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
 	  <http://www.conitec.net/english/linuxboard.htm>
 
 config MACH_ATEB9200
 	bool "Embest ATEB9200"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Embest's ATEB9200 board.
 	  <http://www.embedinfo.com/english/product/ATEB9200.asp>
 
 config MACH_KB9200
 	bool "KwikByte KB920x"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using KwikByte's KB920x board.
 	  <http://kwikbyte.com/KB9202_description_new.htm>
 
 config MACH_PICOTUX2XX
 	bool "picotux 200"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using a picotux 200.
 	  <http://www.picotux.com/>
 
 config MACH_KAFA
 	bool "Sperry-Sun KAFA board"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Sperry-Sun's KAFA board.
 
 config MACH_ECBAT91
 	bool "emQbit ECB_AT91 SBC"
-	depends on ARCH_AT91RM9200
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using emQbit's ECB_AT91 board.
 	  <http://wiki.emqbit.com/free-ecb-at91>
 
 config MACH_YL9200
 	bool "ucDragon YL-9200"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using the ucDragon YL-9200 board.
 
 config MACH_CPUAT91
 	bool "Eukrea CPUAT91"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using the Eukrea Electromatique's
 	  CPUAT91 board <http://www.eukrea.com/>.
 
+config MACH_ECO920
+	bool "eco920"
+	help
+	  Select this if you are using the eco920 board
+
 endif
 
 # ----------------------------------------------------------
@@ -173,7 +198,6 @@ comment "AT91SAM9260 Variants"
 
 config ARCH_AT91SAM9260_SAM9XE
 	bool "AT91SAM9XE"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
 	  They are basically AT91SAM9260s with various sizes of embedded Flash.
@@ -182,28 +206,27 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type"
 
 config MACH_AT91SAM9260EK
 	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
-	depends on ARCH_AT91SAM9260
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 
 config MACH_CAM60
 	bool "KwikByte KB9260 (CAM60) board"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
 	  <http://www.kwikbyte.com/KB9260.html>
 
 config MACH_SAM9_L9260
 	bool "Olimex SAM9-L9260 board"
-	depends on ARCH_AT91SAM9260
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
 	  <http://www.olimex.com/dev/sam9-L9260.html>
 
 config MACH_AFEB9260
 	bool "Custom afeb9260 board v1"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using custom afeb9260 board based on
 	  open hardware design. Select this for revision 1 of the board.
@@ -212,21 +235,18 @@ config MACH_AFEB9260
 
 config MACH_USB_A9260
 	bool "CALAO USB-A9260"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using a Calao Systems USB-A9260.
 	  <http://www.calao-systems.com>
 
 config MACH_QIL_A9260
 	bool "CALAO QIL-A9260 board"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using a Calao Systems QIL-A9260 Board.
 	  <http://www.calao-systems.com>
 
 config MACH_CPU9260
 	bool "Eukrea CPU9260 board"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using a Eukrea Electromatique's
 	  CPU9260 Board <http://www.eukrea.com/>
@@ -241,7 +261,8 @@ comment "AT91SAM9261 Board Type"
 
 config MACH_AT91SAM9261EK
 	bool "Atmel AT91SAM9261-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9261
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
@@ -256,7 +277,8 @@ comment "AT91SAM9G10 Board Type"
 
 config MACH_AT91SAM9G10EK
 	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9G10
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
@@ -271,21 +293,21 @@ comment "AT91SAM9263 Board Type"
 
 config MACH_AT91SAM9263EK
 	bool "Atmel AT91SAM9263-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9263
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
 
 config MACH_USB_A9263
 	bool "CALAO USB-A9263"
-	depends on ARCH_AT91SAM9263
 	help
 	  Select this if you are using a Calao Systems USB-A9263.
 	  <http://www.calao-systems.com>
 
 config MACH_NEOCORE926
 	bool "Adeneo NEOCORE926"
-	depends on ARCH_AT91SAM9263
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using the Adeneo Neocore 926 board.
 
@@ -299,7 +321,6 @@ comment "AT91SAM9RL Board Type"
 
 config MACH_AT91SAM9RLEK
 	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9RL
 	help
 	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
 
@@ -313,14 +334,15 @@ comment "AT91SAM9G20 Board Type"
 
 config MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9G20
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
 	  that embeds only one SD/MMC slot.
 
 config MACH_AT91SAM9G20EK_2MMC
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
-	depends on ARCH_AT91SAM9G20
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
 	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
@@ -328,7 +350,6 @@ config MACH_AT91SAM9G20EK_2MMC
 
 config MACH_CPU9G20
 	bool "Eukrea CPU9G20 board"
-	depends on ARCH_AT91SAM9G20
 	help
 	  Select this if you are using a Eukrea Electromatique's
 	  CPU9G20 Board <http://www.eukrea.com/>
@@ -343,7 +364,7 @@ comment "AT91SAM9G45 Board Type"
 
 config MACH_AT91SAM9G45EKES
 	bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
-	depends on ARCH_AT91SAM9G45
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
 	  "ES" at the end of the name means that this board is an
@@ -359,7 +380,8 @@ comment "AT91CAP9 Board Type"
 
 config MACH_AT91CAP9ADK
 	bool "Atmel AT91CAP9A-DK Evaluation Kit"
-	depends on ARCH_AT91CAP9
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
@@ -388,13 +410,13 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+	depends on HAVE_AT91_DATAFLASH_CARD
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+	depends on HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
@@ -456,15 +478,15 @@ config AT91_EARLY_USART2
 
 config AT91_EARLY_USART3
 	bool "USART3"
-	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45)
+	depends on HAVE_AT91_USART3
 
 config AT91_EARLY_USART4
 	bool "USART4"
-	depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
+	depends on HAVE_AT91_USART4
 
 config AT91_EARLY_USART5
 	bool "USART5"
-	depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
+	depends on HAVE_AT91_USART5
 
 endchoice
 
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index ada440aab0c5..709fbad4a3ee 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
 obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
 obj-$(CONFIG_MACH_YL9200)	+= board-yl-9200.o
 obj-$(CONFIG_MACH_CPUAT91)	+= board-cpuat91.o
+obj-$(CONFIG_MACH_ECO920)	+= board-eco920.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -77,6 +78,7 @@ obj-y				+= leds.o
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
+obj-$(CONFIG_CPU_IDLE)	+= cpuidle.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 332b784050b2..809114d5a5a6 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -131,6 +131,62 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
 
 
 /* --------------------------------------------------------------------
+ *  USB Host HS (EHCI)
+ *  Needs an OHCI host for low and full speed management
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ehci_data;
+
+static struct resource usbh_ehci_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_EHCI_BASE,
+		.end	= AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_UHPHS,
+		.end	= AT91SAM9G45_ID_UHPHS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_ehci_device = {
+	.name		= "atmel-ehci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ehci_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &usbh_ehci_data,
+	},
+	.resource	= usbh_ehci_resources,
+	.num_resources	= ARRAY_SIZE(usbh_ehci_resources),
+};
+
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	/* Enable VBus control for UHP ports */
+	for (i = 0; i < data->ports; i++) {
+		if (data->vbus_pin[i])
+			at91_set_gpio_output(data->vbus_pin[i], 0);
+	}
+
+	usbh_ehci_data = *data;
+	at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
+	platform_device_register(&at91_usbh_ehci_device);
+}
+#else
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
@@ -810,6 +866,57 @@ static void __init at91_add_device_rtc(void) {}
 
 
 /* --------------------------------------------------------------------
+ *  Touchscreen
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
+static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
+static struct at91_tsadcc_data tsadcc_data;
+
+static struct resource tsadcc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TSC,
+		.end	= AT91SAM9G45_BASE_TSC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TSC,
+		.end	= AT91SAM9G45_ID_TSC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device at91sam9g45_tsadcc_device = {
+	.name		= "atmel_tsadcc",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &tsadcc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &tsadcc_data,
+	},
+	.resource	= tsadcc_resources,
+	.num_resources	= ARRAY_SIZE(tsadcc_resources),
+};
+
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_gpio_input(AT91_PIN_PD20, 0);	/* AD0_XR */
+	at91_set_gpio_input(AT91_PIN_PD21, 0);	/* AD1_XL */
+	at91_set_gpio_input(AT91_PIN_PD22, 0);	/* AD2_YT */
+	at91_set_gpio_input(AT91_PIN_PD23, 0);	/* AD3_TB */
+
+	tsadcc_data = *data;
+	platform_device_register(&at91sam9g45_tsadcc_device);
+}
+#else
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  RTT
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index d345f5453dbe..53aaa94df75a 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -622,6 +622,7 @@ static void __init at91_add_device_tc(void) { }
 
 #if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
 static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
+static struct at91_tsadcc_data tsadcc_data;
 
 static struct resource tsadcc_resources[] = {
 	[0] = {
@@ -642,22 +643,27 @@ static struct platform_device at91sam9rl_tsadcc_device = {
 	.dev		= {
 				.dma_mask		= &tsadcc_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &tsadcc_data,
 	},
 	.resource	= tsadcc_resources,
 	.num_resources	= ARRAY_SIZE(tsadcc_resources),
 };
 
-void __init at91_add_device_tsadcc(void)
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
 {
+	if (!data)
+		return;
+
 	at91_set_A_periph(AT91_PIN_PA17, 0);	/* AD0_XR */
 	at91_set_A_periph(AT91_PIN_PA18, 0);	/* AD1_XL */
 	at91_set_A_periph(AT91_PIN_PA19, 0);	/* AD2_YT */
 	at91_set_A_periph(AT91_PIN_PA20, 0);	/* AD3_TB */
 
+	tsadcc_data = *data;
 	platform_device_register(&at91sam9rl_tsadcc_device);
 }
 #else
-void __init at91_add_device_tsadcc(void) {}
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
new file mode 100644
index 000000000000..295a96609e71
--- /dev/null
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -0,0 +1,158 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/at91rm9200_mc.h>
+#include "generic.h"
+
+static void __init eco920_map_io(void)
+{
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+
+	/* DBGU on ttyS0. (Rx & Tx only */
+	at91_register_uart(0, 0, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init eco920_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata eco920_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC2,
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata eco920_usbh_data = {
+	.ports		= 1,
+};
+
+static struct at91_udc_data __initdata eco920_udc_data = {
+	.vbus_pin	= AT91_PIN_PB12,
+	.pullup_pin	= AT91_PIN_PB13,
+};
+
+static struct at91_mmc_data __initdata eco920_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 0,
+};
+
+static struct physmap_flash_data eco920_flash_data = {
+	.width  = 2,
+};
+
+static struct resource eco920_flash_resource = {
+	.start          = 0x11000000,
+	.end            = 0x11ffffff,
+	.flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device eco920_flash = {
+	.name           = "physmap-flash",
+	.id             = 0,
+	.dev            = {
+		.platform_data  = &eco920_flash_data,
+	},
+	.resource       = &eco920_flash_resource,
+	.num_resources  = 1,
+};
+
+static struct resource at91_beeper_resources[] = {
+	[0] = {
+		.start          = AT91RM9200_BASE_TC3,
+		.end            = AT91RM9200_BASE_TC3 + 0x39,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device at91_beeper = {
+	.name           = "at91_beeper",
+	.id             = 0,
+	.resource       = at91_beeper_resources,
+	.num_resources  = ARRAY_SIZE(at91_beeper_resources),
+};
+
+static struct spi_board_info eco920_spi_devices[] = {
+	{	/* CAN controller */
+		.modalias	= "tlv5638",
+		.chip_select	= 3,
+		.max_speed_hz	= 20 * 1000 * 1000,
+		.mode		= SPI_CPHA,
+	},
+};
+
+static void __init eco920_board_init(void)
+{
+	at91_add_device_serial();
+	at91_add_device_eth(&eco920_eth_data);
+	at91_add_device_usbh(&eco920_usbh_data);
+	at91_add_device_udc(&eco920_udc_data);
+
+	at91_add_device_mmc(0, &eco920_mmc_data);
+	platform_device_register(&eco920_flash);
+
+	at91_sys_write(AT91_SMC_CSR(7),	AT91_SMC_RWHOLD_(1)
+				| AT91_SMC_RWSETUP_(1)
+				| AT91_SMC_DBW_8
+				| AT91_SMC_WSEN
+				| AT91_SMC_NWS_(15));
+
+	at91_set_A_periph(AT91_PIN_PC6, 1);
+
+	at91_set_gpio_input(AT91_PIN_PA23, 0);
+	at91_set_deglitch(AT91_PIN_PA23, 1);
+
+/* Initialization of the Static Memory Controller for Chip Select 3 */
+	at91_sys_write(AT91_SMC_CSR(3),
+		AT91_SMC_DBW_16  |	/* 16 bit */
+		AT91_SMC_WSEN    |
+		AT91_SMC_NWS_(5) |	/* wait states */
+		AT91_SMC_TDF_(1)	/* float time */
+	);
+
+	at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper");
+	at91_set_B_periph(AT91_PIN_PB6, 0);
+	platform_device_register(&at91_beeper);
+
+	at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+}
+
+MACHINE_START(ECO920, "eco920")
+	/* Maintainer: Sascha Hauer */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= eco920_map_io,
+	.init_irq	= eco920_init_irq,
+	.init_machine	= eco920_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 64c3843f323d..98f9f4bc9396 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -229,6 +229,16 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
 
 
 /*
+ * Touchscreen
+ */
+static struct at91_tsadcc_data ek_tsadcc_data = {
+	.adc_clock		= 300000,
+	.pendet_debounce	= 0x0d,
+	.ts_sample_hold_time	= 0x0a,
+};
+
+
+/*
  * GPIO Buttons
  */
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -366,6 +376,7 @@ static void __init ek_board_init(void)
 	at91_add_device_serial();
 	/* USB HS Host */
 	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+	at91_add_device_usbh_ehci(&ek_usbh_hs_data);
 	/* USB HS Device */
 	at91_add_device_usba(&ek_usba_udc_data);
 	/* SPI */
@@ -378,6 +389,8 @@ static void __init ek_board_init(void)
 	at91_add_device_i2c(0, NULL, 0);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
+	/* Touch Screen */
+	at91_add_device_tsadcc(&ek_tsadcc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* AC97 */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index bd28e989e54e..7ac20f3a2067 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -243,6 +243,16 @@ static struct gpio_led ek_leds[] = {
 
 
 /*
+ * Touchscreen
+ */
+static struct at91_tsadcc_data ek_tsadcc_data = {
+	.adc_clock		= 1000000,
+	.pendet_debounce	= 0x0f,
+	.ts_sample_hold_time	= 0x03,
+};
+
+
+/*
  * GPIO Buttons
  */
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -310,7 +320,7 @@ static void __init ek_board_init(void)
 	/* AC97 */
 	at91_add_device_ac97(&ek_ac97_data);
 	/* Touch Screen Controller */
-	at91_add_device_tsadcc();
+	at91_add_device_tsadcc(&ek_tsadcc_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	/* Push Buttons */
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
new file mode 100644
index 000000000000..1cfeac1483d6
--- /dev/null
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -0,0 +1,94 @@
+/*
+ * based on arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle support for AT91 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and RAM self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and RAM self refresh
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <asm/proc-fns.h>
+#include <linux/io.h>
+
+#include "pm.h"
+
+#define AT91_MAX_STATES	2
+
+static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device);
+
+static struct cpuidle_driver at91_idle_driver = {
+	.name =         "at91_idle",
+	.owner =        THIS_MODULE,
+};
+
+/* Actual code that puts the SoC in different idle states */
+static int at91_enter_idle(struct cpuidle_device *dev,
+			       struct cpuidle_state *state)
+{
+	struct timeval before, after;
+	int idle_time;
+	u32 saved_lpr;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+	if (state == &dev->states[0])
+		/* Wait for interrupt state */
+		cpu_do_idle();
+	else if (state == &dev->states[1]) {
+		asm("b 1f; .align 5; 1:");
+		asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
+		saved_lpr = sdram_selfrefresh_enable();
+		cpu_do_idle();
+		sdram_selfrefresh_disable(saved_lpr);
+	}
+	do_gettimeofday(&after);
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+			(after.tv_usec - before.tv_usec);
+	return idle_time;
+}
+
+/* Initialize CPU idle by registering the idle states */
+static int at91_init_cpuidle(void)
+{
+	struct cpuidle_device *device;
+
+	cpuidle_register_driver(&at91_idle_driver);
+
+	device = &per_cpu(at91_cpuidle_device, smp_processor_id());
+	device->state_count = AT91_MAX_STATES;
+
+	/* Wait for interrupt state */
+	device->states[0].enter = at91_enter_idle;
+	device->states[0].exit_latency = 1;
+	device->states[0].target_residency = 10000;
+	device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[0].name, "WFI");
+	strcpy(device->states[0].desc, "Wait for interrupt");
+
+	/* Wait for interrupt and RAM self refresh state */
+	device->states[1].enter = at91_enter_idle;
+	device->states[1].exit_latency = 10;
+	device->states[1].target_residency = 10000;
+	device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[1].name, "RAM_SR");
+	strcpy(device->states[1].desc, "WFI and RAM Self Refresh");
+
+	if (cpuidle_register_device(device)) {
+		printk(KERN_ERR "at91_init_cpuidle: Failed registering\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+device_initcall(at91_init_cpuidle);
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 2f4fcedc02ba..bb6f6a7ba5e0 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -98,6 +98,7 @@ struct at91_usbh_data {
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
 
  /* NAND / SmartMedia */
 struct atmel_nand_data {
@@ -186,7 +187,12 @@ extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
 extern void __init at91_add_device_isi(void);
 
  /* Touchscreen Controller */
-extern void __init at91_add_device_tsadcc(void);
+struct at91_tsadcc_data {
+	unsigned int    adc_clock;
+	u8		pendet_debounce;
+	u8		ts_sample_hold_time;
+};
+extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
 
 /* CAN */
 struct at91_can_data {
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 4028724d490d..615668986480 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -29,62 +29,7 @@
 #include <mach/cpu.h>
 
 #include "generic.h"
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#include <mach/at91rm9200_mc.h>
-
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- */
-#define sdram_selfrefresh_enable()	at91_sys_write(AT91_SDRAMC_SRR, 1)
-#define sdram_selfrefresh_disable()	do {} while (0)
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9_ddrsdr.h>
-
-static u32 saved_lpr;
-
-static inline void sdram_selfrefresh_enable(void)
-{
-	u32 lpr;
-
-	saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
-
-	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-	at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
-}
-
-#define sdram_selfrefresh_disable()	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
-
-#else
-#include <mach/at91sam9_sdramc.h>
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
- */
-#define	AT91_SDRAMC	AT91_SDRAMC0
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
-
-static u32 saved_lpr;
-
-static inline void sdram_selfrefresh_enable(void)
-{
-	u32 lpr;
-
-	saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
-
-	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
-}
-
-#define sdram_selfrefresh_disable()	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
-
-#endif
-
+#include "pm.h"
 
 /*
  * Show the reason for the previous system reset.
@@ -260,6 +205,7 @@ extern u32 at91_slow_clock_sz;
 
 static int at91_pm_enter(suspend_state_t state)
 {
+	u32 saved_lpr;
 	at91_gpio_suspend();
 	at91_irq_suspend();
 
@@ -315,9 +261,9 @@ static int at91_pm_enter(suspend_state_t state)
 			 */
 			asm("b 1f; .align 5; 1:");
 			asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
-			sdram_selfrefresh_enable();
+			saved_lpr = sdram_selfrefresh_enable();
 			asm("mcr p15, 0, r0, c7, c0, 4");	/* wait for interrupt */
-			sdram_selfrefresh_disable();
+			sdram_selfrefresh_disable(saved_lpr);
 			break;
 
 		case PM_SUSPEND_ON:
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
new file mode 100644
index 000000000000..08322c44df1a
--- /dev/null
+++ b/arch/arm/mach-at91/pm.h
@@ -0,0 +1,67 @@
+#ifdef CONFIG_ARCH_AT91RM9200
+#include <mach/at91rm9200_mc.h>
+
+/*
+ * The AT91RM9200 goes into self-refresh mode with this command, and will
+ * terminate self-refresh automatically on the next SDRAM access.
+ *
+ * Self-refresh mode is exited as soon as a memory access is made, but we don't
+ * know for sure when that happens. However, we need to restore the low-power
+ * mode if it was enabled before going idle. Restoring low-power mode while
+ * still in self-refresh is "not recommended", but seems to work.
+ */
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+	u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+
+	at91_sys_write(AT91_SDRAMC_LPR, 0);
+	at91_sys_write(AT91_SDRAMC_SRR, 1);
+	return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9_ddrsdr.h>
+
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+	u32 saved_lpr, lpr;
+
+	saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+
+	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
+	at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+	return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+
+#else
+#include <mach/at91sam9_sdramc.h>
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+/*
+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
+ * handle those cases both here and in the Suspend-To-RAM support.
+ */
+#define	AT91_SDRAMC	AT91_SDRAMC0
+#warning Assuming EB1 SDRAM controller is *NOT* used
+#endif
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+	u32 saved_lpr, lpr;
+
+	saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+
+	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
+	at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+	return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+
+#endif
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 0da693b0f7e1..fbe6fa02c882 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -47,10 +47,6 @@ HW_DECLARE_SPINLOCK(gpio)
     EXPORT_SYMBOL(bcmring_gpio_reg_lock);
 #endif
 
-/* FIXME: temporary solution */
-#define BCM_SYSCTL_REBOOT_WARM               1
-#define CTL_BCM_REBOOT                 112
-
 /* sysctl */
 int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
 
@@ -58,18 +54,16 @@ static struct ctl_table_header *bcmring_sysctl_header;
 
 static struct ctl_table bcmring_sysctl_warm_reboot[] = {
 	{
-	 .ctl_name = BCM_SYSCTL_REBOOT_WARM,
 	 .procname = "warm",
 	 .data = &bcmring_arch_warm_reboot,
 	 .maxlen = sizeof(int),
 	 .mode = 0644,
-	 .proc_handler = &proc_dointvec},
+	 .proc_handler = proc_dointvec},
 	{}
 };
 
 static struct ctl_table bcmring_sysctl_reboot[] = {
 	{
-	 .ctl_name = CTL_BCM_REBOOT,
 	 .procname = "reboot",
 	 .mode = 0555,
 	 .child = bcmring_sysctl_warm_reboot},
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
index e5f60bf5a1f3..56654d23c3d7 100644
--- a/arch/arm/mach-bcmring/include/csp/reg.h
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -16,7 +16,7 @@
 /**
 *  @file    reg.h
 *
-*  @brief   Generic register defintions used in CSP
+*  @brief   Generic register definitions used in CSP
 */
 /****************************************************************************/
 
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
index 375066ad0186..cbf334d1c761 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -83,7 +83,7 @@ typedef struct {
 *  @brief   Get next available transaction width
 *
 *
-*  @return  On sucess  : Next avail able transaction width
+*  @return  On success  : Next available transaction width
 *           On failure : dmacHw_TRANSACTION_WIDTH_8
 *
 *  @note
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
index 86bb58d4f58c..ad58cf873377 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -16,7 +16,7 @@
 /**
 *  @file    mm_addr.h
 *
-*  @brief   Memory Map address defintions
+*  @brief   Memory Map address definitions
 *
 *  @note
 *     None
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
index 847980c85c88..1f2c5319c056 100644
--- a/arch/arm/mach-bcmring/include/mach/dma.h
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -651,7 +651,7 @@ int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about t
 /**
 *   Creates a descriptor ring from a memory mapping.
 *
-*   @return 0 on sucess, error code otherwise.
+*   @return 0 on success, error code otherwise.
 */
 /****************************************************************************/
 
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
index 4db0eff90357..dae5e9b166ea 100644
--- a/arch/arm/mach-bcmring/include/mach/io.h
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -23,34 +23,11 @@
 
 #define IO_SPACE_LIMIT 0xffffffff
 
-#define __io(a)         ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
-
-/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
-/* happen in readw/writew etc. */
-
-#define readb(c)        __raw_readb(c)
-#define readw(c)        __raw_readw(c)
-#define readl(c)        __raw_readl(c)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define readsb(p, d, l)   __raw_readsb(p, d, l)
-#define readsw(p, d, l)   __raw_readsw(p, d, l)
-#define readsl(p, d, l)   __raw_readsl(p, d, l)
-
-#define writeb(v, c)     __raw_writeb(v, c)
-#define writew(v, c)     __raw_writew(v, c)
-#define writel(v, c)     __raw_writel(v, c)
-
-#define writesb(p, d, l)  __raw_writesb(p, d, l)
-#define writesw(p, d, l)  __raw_writesw(p, d, l)
-#define writesl(p, d, l)  __raw_writesl(p, d, l)
-
-#define memset_io(c, v, l)    _memset_io((c), (v), (l))
-#define memcpy_fromio(a, c, l)    _memcpy_fromio((a), (c), (l))
-#define memcpy_toio(c, a, l)  _memcpy_toio((c), (a), (l))
-
-#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 40866c643f13..033bfede6b67 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -32,11 +32,13 @@ config ARCH_DAVINCI_DA830
         bool "DA830/OMAP-L137 based system"
 	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
+	select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138 based system"
 	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
+	select ARCH_HAS_CPUFREQ
 
 config ARCH_DAVINCI_DA8XX
 	bool
@@ -63,6 +65,13 @@ config MACH_SFFSDR
 	  Say Y here to select the Lyrtech Small Form Factor
 	  Software Defined Radio (SFFSDR) board.
 
+config MACH_NEUROS_OSD2
+	bool "Neuros OSD2 Open Television Set Top Box"
+	depends on ARCH_DAVINCI_DM644x
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a Neuros OSD2 Open Set Top Box.
+
 config MACH_DAVINCI_DM355_EVM
 	bool "TI DM355 EVM"
 	default ARCH_DAVINCI_DM355
@@ -98,16 +107,66 @@ config MACH_DAVINCI_DA830_EVM
 	bool "TI DA830/OMAP-L137 Reference Platform"
 	default ARCH_DAVINCI_DA830
 	depends on ARCH_DAVINCI_DA830
+	select GPIO_PCF857X
 	help
 	  Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
 
+choice
+	prompt "Select DA830/OMAP-L137 UI board peripheral"
+	depends on MACH_DAVINCI_DA830_EVM
+	help
+	  The presence of UI card on the DA830/OMAP-L137 EVM is detected
+	  automatically based on successful probe of the I2C based GPIO
+	  expander on that board. This option selected in this menu has
+	  an effect only in case of a successful UI card detection.
+
+config DA830_UI_LCD
+	bool "LCD"
+	help
+	  Say Y here to use the LCD as a framebuffer or simple character
+	  display.
+
+config DA830_UI_NAND
+	bool "NAND flash"
+	help
+	  Say Y here to use the NAND flash.  Do not forget to setup
+	  the switch correctly.
+endchoice
+
 config MACH_DAVINCI_DA850_EVM
 	bool "TI DA850/OMAP-L138 Reference Platform"
 	default ARCH_DAVINCI_DA850
 	depends on ARCH_DAVINCI_DA850
+	select GPIO_PCA953X
 	help
 	  Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
 
+choice
+	prompt "Select peripherals connected to expander on UI board"
+	depends on MACH_DAVINCI_DA850_EVM
+	help
+	  The presence of User Interface (UI) card on the DA850/OMAP-L138
+	  EVM is detected automatically based on successful probe of the I2C
+	  based GPIO expander on that card. This option selected in this
+	  menu has an effect only in case of a successful UI card detection.
+
+config DA850_UI_NONE
+	bool "No peripheral is enabled"
+	help
+	  Say Y if you do not want to enable any of the peripherals connected
+	  to TCA6416 expander on DA850/OMAP-L138 EVM UI card
+
+config DA850_UI_RMII
+	bool "RMII Ethernet PHY"
+	help
+	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM.
+	  This PHY is found on the UI daughter card that is supplied with
+	  the EVM.
+	  NOTE: Please take care while choosing this option, MII PHY will
+	  not be functional if RMII mode is selected.
+
+endchoice
+
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
 	depends on ARCH_DAVINCI
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2e11e847313b..eeb9230d8844 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -23,9 +23,14 @@ obj-$(CONFIG_CP_INTC)			+= cp_intc.o
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
 obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
+obj-$(CONFIG_MACH_NEUROS_OSD2)		+= board-neuros-osd2.o
 obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
 obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
 obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
+
+# Power Management
+obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
+obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index bfbb63936f33..31dc9901e556 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -10,51 +10,194 @@
  * or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/console.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/irqs.h>
 #include <mach/cp_intc.h>
+#include <mach/mux.h>
+#include <mach/nand.h>
 #include <mach/da8xx.h>
-#include <mach/asp.h>
+#include <mach/usb.h>
 
 #define DA830_EVM_PHY_MASK		0x0
 #define DA830_EVM_MDIO_FREQUENCY	2200000	/* PHY bus frequency */
 
-static struct at24_platform_data da830_evm_i2c_eeprom_info = {
-	.byte_len	= SZ_256K / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup		= davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
-};
+#define DA830_EMIF25_ASYNC_DATA_CE3_BASE	0x62000000
+#define DA830_EMIF25_CONTROL_BASE		0x68000000
 
-static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &da830_evm_i2c_eeprom_info,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	}
+/*
+ * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
+ */
+#define ON_BD_USB_DRV	GPIO_TO_PIN(1, 15)
+#define ON_BD_USB_OVC	GPIO_TO_PIN(2, 4)
+
+static const short da830_evm_usb11_pins[] = {
+	DA830_GPIO1_15, DA830_GPIO2_4,
+	-1
 };
 
-static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
+static da8xx_ocic_handler_t da830_evm_usb_ocic_handler;
+
+static int da830_evm_usb_set_power(unsigned port, int on)
+{
+	gpio_set_value(ON_BD_USB_DRV, on);
+	return 0;
+}
+
+static int da830_evm_usb_get_power(unsigned port)
+{
+	return gpio_get_value(ON_BD_USB_DRV);
+}
+
+static int da830_evm_usb_get_oci(unsigned port)
+{
+	return !gpio_get_value(ON_BD_USB_OVC);
+}
+
+static irqreturn_t da830_evm_usb_ocic_irq(int, void *);
+
+static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
+{
+	int irq 	= gpio_to_irq(ON_BD_USB_OVC);
+	int error	= 0;
+
+	if (handler != NULL) {
+		da830_evm_usb_ocic_handler = handler;
+
+		error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED |
+				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				    "OHCI over-current indicator", NULL);
+		if (error)
+			printk(KERN_ERR "%s: could not request IRQ to watch "
+			       "over-current indicator changes\n", __func__);
+	} else
+		free_irq(irq, NULL);
+
+	return error;
+}
+
+static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
+	.set_power	= da830_evm_usb_set_power,
+	.get_power	= da830_evm_usb_get_power,
+	.get_oci	= da830_evm_usb_get_oci,
+	.ocic_notify	= da830_evm_usb_ocic_notify,
+
+	/* TPS2065 switch @ 5V */
+	.potpgt		= (3 + 1) / 2,	/* 3 ms max */
 };
 
+static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id)
+{
+	da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1);
+	return IRQ_HANDLED;
+}
+
+static __init void da830_evm_usb_init(void)
+{
+	u32 cfgchip2;
+	int ret;
+
+	/*
+	 * Set up USB clock/mode in the CFGCHIP2 register.
+	 * FYI:  CFGCHIP2 is 0x0000ef00 initially.
+	 */
+	cfgchip2 = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+
+	/* USB2.0 PHY reference clock is 24 MHz */
+	cfgchip2 &= ~CFGCHIP2_REFFREQ;
+	cfgchip2 |=  CFGCHIP2_REFFREQ_24MHZ;
+
+	/*
+	 * Select internal reference clock for USB 2.0 PHY
+	 * and use it as a clock source for USB 1.1 PHY
+	 * (this is the default setting anyway).
+	 */
+	cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX;
+	cfgchip2 |=  CFGCHIP2_USB2PHYCLKMUX;
+
+	/*
+	 * We have to override VBUS/ID signals when MUSB is configured into the
+	 * host-only mode -- ID pin will float if no cable is connected, so the
+	 * controller won't be able to drive VBUS thinking that it's a B-device.
+	 * Otherwise, we want to use the OTG mode and enable VBUS comparators.
+	 */
+	cfgchip2 &= ~CFGCHIP2_OTGMODE;
+#ifdef	CONFIG_USB_MUSB_HOST
+	cfgchip2 |=  CFGCHIP2_FORCE_HOST;
+#else
+	cfgchip2 |=  CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
+#endif
+
+	__raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+
+	/* USB_REFCLKIN is not used. */
+	ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
+	if (ret)
+		pr_warning("%s: USB 2.0 PinMux setup failed: %d\n",
+			   __func__, ret);
+	else {
+		/*
+		 * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
+		 * with the power on to power good time of 3 ms.
+		 */
+		ret = da8xx_register_usb20(1000, 3);
+		if (ret)
+			pr_warning("%s: USB 2.0 registration failed: %d\n",
+				   __func__, ret);
+	}
+
+	ret = da8xx_pinmux_setup(da830_evm_usb11_pins);
+	if (ret) {
+		pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
+			   __func__, ret);
+		return;
+	}
+
+	ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV");
+	if (ret) {
+		printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
+		       "power control: %d\n", __func__, ret);
+		return;
+	}
+	gpio_direction_output(ON_BD_USB_DRV, 0);
+
+	ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
+	if (ret) {
+		printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
+		       "over-current indicator: %d\n", __func__, ret);
+		return;
+	}
+	gpio_direction_input(ON_BD_USB_OVC);
+
+	ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
+	if (ret)
+		pr_warning("%s: USB 1.1 registration failed: %d\n",
+			   __func__, ret);
+}
+
 static struct davinci_uart_config da830_evm_uart_config __initdata = {
 	.enabled_uarts = 0x7,
 };
 
+static const short da830_evm_mcasp1_pins[] = {
+	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
+	DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
+	DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10,
+	DA830_AXR1_11,
+	-1
+};
+
 static u8 da830_iis_serializer_direction[] = {
 	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
 	INACTIVE_MODE,	TX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
@@ -74,6 +217,271 @@ static struct snd_platform_data da830_evm_snd_data = {
 	.rxnumevt	= 1,
 };
 
+/*
+ * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS.
+ */
+static const short da830_evm_mmc_sd_pins[] = {
+	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
+	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
+	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
+	DA830_MMCSD_CMD,   DA830_GPIO2_1,     DA830_GPIO2_2,
+	-1
+};
+
+#define DA830_MMCSD_WP_PIN		GPIO_TO_PIN(2, 1)
+
+static int da830_evm_mmc_get_ro(int index)
+{
+	return gpio_get_value(DA830_MMCSD_WP_PIN);
+}
+
+static struct davinci_mmc_config da830_evm_mmc_config = {
+	.get_ro			= da830_evm_mmc_get_ro,
+	.wires			= 4,
+	.max_freq		= 50000000,
+	.caps			= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version		= MMC_CTLR_VERSION_2,
+};
+
+static inline void da830_evm_init_mmc(void)
+{
+	int ret;
+
+	ret = da8xx_pinmux_setup(da830_evm_mmc_sd_pins);
+	if (ret) {
+		pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n",
+				ret);
+		return;
+	}
+
+	ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP");
+	if (ret) {
+		pr_warning("da830_evm_init: can not open GPIO %d\n",
+			   DA830_MMCSD_WP_PIN);
+		return;
+	}
+	gpio_direction_input(DA830_MMCSD_WP_PIN);
+
+	ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
+	if (ret) {
+		pr_warning("da830_evm_init: mmc/sd registration failed: %d\n",
+				ret);
+		gpio_free(DA830_MMCSD_WP_PIN);
+	}
+}
+
+/*
+ * UI board NAND/NOR flashes only use 8-bit data bus.
+ */
+static const short da830_evm_emif25_pins[] = {
+	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
+	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
+	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
+	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
+	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
+	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
+	DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
+	-1
+};
+
+#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC	1
+#else
+#define HAS_MMC	0
+#endif
+
+#ifdef CONFIG_DA830_UI_NAND
+static struct mtd_partition da830_evm_nand_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	[0] = {
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	/* bootloader params in the next sector */
+	[1] = {
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	/* kernel */
+	[2] = {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M,
+		.mask_flags	= 0,
+	},
+	/* file system */
+	[3] = {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+};
+
+/* flash bbt decriptors */
+static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' };
+static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = {
+	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
+			  NAND_BBT_WRITE | NAND_BBT_2BIT |
+			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs		= 2,
+	.len		= 4,
+	.veroffs	= 16,
+	.maxblocks	= 4,
+	.pattern	= da830_evm_nand_bbt_pattern
+};
+
+static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = {
+	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
+			  NAND_BBT_WRITE | NAND_BBT_2BIT |
+			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs		= 2,
+	.len		= 4,
+	.veroffs	= 16,
+	.maxblocks	= 4,
+	.pattern	= da830_evm_nand_mirror_pattern
+};
+
+static struct davinci_nand_pdata da830_evm_nand_pdata = {
+	.parts		= da830_evm_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
+	.ecc_mode	= NAND_ECC_HW,
+	.ecc_bits	= 4,
+	.options	= NAND_USE_FLASH_BBT,
+	.bbt_td		= &da830_evm_nand_bbt_main_descr,
+	.bbt_md		= &da830_evm_nand_bbt_mirror_descr,
+};
+
+static struct resource da830_evm_nand_resources[] = {
+	[0] = {		/* First memory resource is NAND I/O window */
+		.start	= DA830_EMIF25_ASYNC_DATA_CE3_BASE,
+		.end	= DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {		/* Second memory resource is AEMIF control registers */
+		.start	= DA830_EMIF25_CONTROL_BASE,
+		.end	= DA830_EMIF25_CONTROL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da830_evm_nand_device = {
+	.name		= "davinci_nand",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &da830_evm_nand_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(da830_evm_nand_resources),
+	.resource	= da830_evm_nand_resources,
+};
+
+static inline void da830_evm_init_nand(int mux_mode)
+{
+	int ret;
+
+	if (HAS_MMC) {
+		pr_warning("WARNING: both MMC/SD and NAND are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable MMC/SD for NAND support.\n");
+		return;
+	}
+
+	ret = da8xx_pinmux_setup(da830_evm_emif25_pins);
+	if (ret)
+		pr_warning("da830_evm_init: emif25 mux setup failed: %d\n",
+				ret);
+
+	ret = platform_device_register(&da830_evm_nand_device);
+	if (ret)
+		pr_warning("da830_evm_init: NAND device not registered.\n");
+
+	gpio_direction_output(mux_mode, 1);
+}
+#else
+static inline void da830_evm_init_nand(int mux_mode) { }
+#endif
+
+#ifdef CONFIG_DA830_UI_LCD
+static inline void da830_evm_init_lcdc(int mux_mode)
+{
+	int ret;
+
+	ret = da8xx_pinmux_setup(da830_lcdcntl_pins);
+	if (ret)
+		pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata);
+	if (ret)
+		pr_warning("da830_evm_init: lcd setup failed: %d\n", ret);
+
+	gpio_direction_output(mux_mode, 0);
+}
+#else
+static inline void da830_evm_init_lcdc(int mux_mode) { }
+#endif
+
+static struct at24_platform_data da830_evm_i2c_eeprom_info = {
+	.byte_len	= SZ_256K / 8,
+	.page_size	= 64,
+	.flags		= AT24_FLAG_ADDR16,
+	.setup		= davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
+		int gpio, unsigned ngpio, void *context)
+{
+	gpio_request(gpio + 6, "UI MUX_MODE");
+
+	/* Drive mux mode low to match the default without UI card */
+	gpio_direction_output(gpio + 6, 0);
+
+	da830_evm_init_lcdc(gpio + 6);
+
+	da830_evm_init_nand(gpio + 6);
+
+	return 0;
+}
+
+static int da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio,
+		unsigned ngpio, void *context)
+{
+	gpio_free(gpio + 6);
+	return 0;
+}
+
+static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
+	.gpio_base	= DAVINCI_N_GPIO,
+	.setup		= da830_evm_ui_expander_setup,
+	.teardown	= da830_evm_ui_expander_teardown,
+};
+
+static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &da830_evm_i2c_eeprom_info,
+	},
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	},
+	{
+		I2C_BOARD_INFO("pcf8574", 0x3f),
+		.platform_data	= &da830_evm_ui_expander_info,
+	},
+};
+
+static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
 static __init void da830_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -94,6 +502,8 @@ static __init void da830_evm_init(void)
 		pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
 				ret);
 
+	da830_evm_usb_init();
+
 	soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
 	soc_info->emac_pdata->rmii_en = 1;
@@ -117,12 +527,18 @@ static __init void da830_evm_init(void)
 	i2c_register_board_info(1, da830_evm_i2c_devices,
 			ARRAY_SIZE(da830_evm_i2c_devices));
 
-	ret = da8xx_pinmux_setup(da830_mcasp1_pins);
+	ret = da8xx_pinmux_setup(da830_evm_mcasp1_pins);
 	if (ret)
 		pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
 				ret);
 
-	da8xx_init_mcasp(1, &da830_evm_snd_data);
+	da8xx_register_mcasp(1, &da830_evm_snd_data);
+
+	da830_evm_init_mmc();
+
+	ret = da8xx_register_rtc();
+	if (ret)
+		pr_warning("da830_evm_init: rtc setup failed: %d\n", ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -146,7 +562,7 @@ static void __init da830_evm_map_io(void)
 	da830_init();
 }
 
-MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM")
+MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM")
 	.phys_io	= IO_PHYS,
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index c759d72494e0..62b98bffc158 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -12,36 +12,38 @@
  * or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/i2c/pca953x.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/irqs.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/nand.h>
+#include <mach/mux.h>
 
 #define DA850_EVM_PHY_MASK		0x1
 #define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
 
+#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
 #define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
-#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(8, 10)
 
 #define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
 
+#define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
+
 static struct mtd_partition da850_evm_norflash_partition[] = {
 	{
 		.name           = "NOR filesystem",
@@ -143,10 +145,149 @@ static struct platform_device da850_evm_nandflash_device = {
 	.resource	= da850_evm_nandflash_resource,
 };
 
+static struct platform_device *da850_evm_devices[] __initdata = {
+	&da850_evm_nandflash_device,
+	&da850_evm_norflash_device,
+};
+
+#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
+#define DA8XX_AEMIF_ASIZE_16BIT		0x1
+
+static void __init da850_evm_init_nor(void)
+{
+	void __iomem *aemif_addr;
+
+	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+
+	/* Configure data bus width of CS2 to 16 bit */
+	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
+		DA8XX_AEMIF_ASIZE_16BIT,
+		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+
+	iounmap(aemif_addr);
+}
+
+static u32 ui_card_detected;
+
+#if defined(CONFIG_MMC_DAVINCI) || \
+    defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC 1
+#else
+#define HAS_MMC 0
+#endif
+
+static __init void da850_evm_setup_nor_nand(void)
+{
+	int ret = 0;
+
+	if (ui_card_detected & !HAS_MMC) {
+		ret = da8xx_pinmux_setup(da850_nand_pins);
+		if (ret)
+			pr_warning("da850_evm_init: nand mux setup failed: "
+					"%d\n", ret);
+
+		ret = da8xx_pinmux_setup(da850_nor_pins);
+		if (ret)
+			pr_warning("da850_evm_init: nor mux setup failed: %d\n",
+				ret);
+
+		da850_evm_init_nor();
+
+		platform_add_devices(da850_evm_devices,
+					ARRAY_SIZE(da850_evm_devices));
+	}
+}
+
+#ifdef CONFIG_DA850_UI_RMII
+static inline void da850_evm_setup_emac_rmii(int rmii_sel)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	soc_info->emac_pdata->rmii_en = 1;
+	gpio_set_value(rmii_sel, 0);
+}
+#else
+static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
+#endif
+
+static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
+						unsigned ngpio, void *c)
+{
+	int sel_a, sel_b, sel_c, ret;
+
+	sel_a = gpio + 7;
+	sel_b = gpio + 6;
+	sel_c = gpio + 5;
+
+	ret = gpio_request(sel_a, "sel_a");
+	if (ret) {
+		pr_warning("Cannot open UI expander pin %d\n", sel_a);
+		goto exp_setup_sela_fail;
+	}
+
+	ret = gpio_request(sel_b, "sel_b");
+	if (ret) {
+		pr_warning("Cannot open UI expander pin %d\n", sel_b);
+		goto exp_setup_selb_fail;
+	}
+
+	ret = gpio_request(sel_c, "sel_c");
+	if (ret) {
+		pr_warning("Cannot open UI expander pin %d\n", sel_c);
+		goto exp_setup_selc_fail;
+	}
+
+	/* deselect all functionalities */
+	gpio_direction_output(sel_a, 1);
+	gpio_direction_output(sel_b, 1);
+	gpio_direction_output(sel_c, 1);
+
+	ui_card_detected = 1;
+	pr_info("DA850/OMAP-L138 EVM UI card detected\n");
+
+	da850_evm_setup_nor_nand();
+
+	da850_evm_setup_emac_rmii(sel_a);
+
+	return 0;
+
+exp_setup_selc_fail:
+	gpio_free(sel_b);
+exp_setup_selb_fail:
+	gpio_free(sel_a);
+exp_setup_sela_fail:
+	return ret;
+}
+
+static int da850_evm_ui_expander_teardown(struct i2c_client *client,
+					unsigned gpio, unsigned ngpio, void *c)
+{
+	/* deselect all functionalities */
+	gpio_set_value(gpio + 5, 1);
+	gpio_set_value(gpio + 6, 1);
+	gpio_set_value(gpio + 7, 1);
+
+	gpio_free(gpio + 5);
+	gpio_free(gpio + 6);
+	gpio_free(gpio + 7);
+
+	return 0;
+}
+
+static struct pca953x_platform_data da850_evm_ui_expander_info = {
+	.gpio_base	= DAVINCI_N_GPIO,
+	.setup		= da850_evm_ui_expander_setup,
+	.teardown	= da850_evm_ui_expander_teardown,
+};
+
 static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	}
+	},
+	{
+		I2C_BOARD_INFO("tca6416", 0x20),
+		.platform_data = &da850_evm_ui_expander_info,
+	},
 };
 
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
@@ -158,11 +299,6 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = {
 	.enabled_uarts = 0x7,
 };
 
-static struct platform_device *da850_evm_devices[] __initdata = {
-	&da850_evm_nandflash_device,
-	&da850_evm_norflash_device,
-};
-
 /* davinci da850 evm audio machine driver */
 static u8 da850_iis_serializer_direction[] = {
 	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
@@ -198,6 +334,8 @@ static struct davinci_mmc_config da850_mmc_config = {
 	.get_ro		= da850_evm_mmc_get_ro,
 	.get_cd		= da850_evm_mmc_get_cd,
 	.wires		= 4,
+	.max_freq	= 50000000,
+	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
 	.version	= MMC_CTLR_VERSION_2,
 };
 
@@ -233,56 +371,227 @@ static int da850_lcd_hw_init(void)
 	return 0;
 }
 
-#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
-#define DA8XX_AEMIF_ASIZE_16BIT		0x1
+/* TPS65070 voltage regulator support */
 
-static void __init da850_evm_init_nor(void)
-{
-	void __iomem *aemif_addr;
+/* 3.3V */
+struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
+	{
+		.supply = "usb0_vdda33",
+	},
+	{
+		.supply = "usb1_vdda33",
+	},
+};
 
-	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+/* 3.3V or 1.8V */
+struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
+	{
+		.supply = "dvdd3318_a",
+	},
+	{
+		.supply = "dvdd3318_b",
+	},
+	{
+		.supply = "dvdd3318_c",
+	},
+};
 
-	/* Configure data bus width of CS2 to 16 bit */
-	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
-		DA8XX_AEMIF_ASIZE_16BIT,
-		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+/* 1.2V */
+struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
+	{
+		.supply = "cvdd",
+	},
+};
 
-	iounmap(aemif_addr);
-}
+/* 1.8V LDO */
+struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
+	{
+		.supply = "sata_vddr",
+	},
+	{
+		.supply = "usb0_vdda18",
+	},
+	{
+		.supply = "usb1_vdda18",
+	},
+	{
+		.supply = "ddr_dvdd18",
+	},
+};
 
-#if defined(CONFIG_MTD_PHYSMAP) || \
-    defined(CONFIG_MTD_PHYSMAP_MODULE)
-#define HAS_NOR 1
-#else
-#define HAS_NOR 0
-#endif
+/* 1.2V LDO */
+struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
+	{
+		.supply = "sata_vdd",
+	},
+	{
+		.supply = "pll0_vdda",
+	},
+	{
+		.supply = "pll1_vdda",
+	},
+	{
+		.supply = "usbs_cvdd",
+	},
+	{
+		.supply = "vddarnwa1",
+	},
+};
 
-#if defined(CONFIG_MMC_DAVINCI) || \
-    defined(CONFIG_MMC_DAVINCI_MODULE)
-#define HAS_MMC 1
-#else
-#define HAS_MMC 0
-#endif
+struct regulator_init_data tps65070_regulator_data[] = {
+	/* dcdc1 */
+	{
+		.constraints = {
+			.min_uV = 3150000,
+			.max_uV = 3450000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
+		.consumer_supplies = tps65070_dcdc1_consumers,
+	},
 
-static __init void da850_evm_init(void)
+	/* dcdc2 */
+	{
+		.constraints = {
+			.min_uV = 1710000,
+			.max_uV = 3450000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
+		.consumer_supplies = tps65070_dcdc2_consumers,
+	},
+
+	/* dcdc3 */
+	{
+		.constraints = {
+			.min_uV = 950000,
+			.max_uV = 1320000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
+		.consumer_supplies = tps65070_dcdc3_consumers,
+	},
+
+	/* ldo1 */
+	{
+		.constraints = {
+			.min_uV = 1710000,
+			.max_uV = 1890000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
+		.consumer_supplies = tps65070_ldo1_consumers,
+	},
+
+	/* ldo2 */
+	{
+		.constraints = {
+			.min_uV = 1140000,
+			.max_uV = 1320000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
+		.consumer_supplies = tps65070_ldo2_consumers,
+	},
+};
+
+static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
+	{
+		I2C_BOARD_INFO("tps6507x", 0x48),
+		.platform_data = &tps65070_regulator_data[0],
+	},
+};
+
+static int __init pmic_tps65070_init(void)
 {
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	return i2c_register_board_info(1, da850evm_tps65070_info,
+					ARRAY_SIZE(da850evm_tps65070_info));
+}
+
+static const short da850_evm_lcdc_pins[] = {
+	DA850_GPIO2_8, DA850_GPIO2_15,
+	-1
+};
+
+static int __init da850_evm_config_emac(void)
+{
+	void __iomem *cfg_chip3_base;
 	int ret;
+	u32 val;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	u8 rmii_en = soc_info->emac_pdata->rmii_en;
+
+	if (!machine_is_davinci_da850_evm())
+		return 0;
+
+	cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG);
+
+	val = __raw_readl(cfg_chip3_base);
+
+	if (rmii_en) {
+		val |= BIT(8);
+		ret = da8xx_pinmux_setup(da850_rmii_pins);
+		pr_info("EMAC: RMII PHY configured, MII PHY will not be"
+							" functional\n");
+	} else {
+		val &= ~BIT(8);
+		ret = da8xx_pinmux_setup(da850_cpgmac_pins);
+		pr_info("EMAC: MII PHY configured, RMII PHY will not be"
+							" functional\n");
+	}
 
-	ret = da8xx_pinmux_setup(da850_nand_pins);
 	if (ret)
-		pr_warning("da850_evm_init: nand mux setup failed: %d\n",
+		pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n",
 				ret);
 
-	ret = da8xx_pinmux_setup(da850_nor_pins);
+	/* configure the CFGCHIP3 register for RMII or MII */
+	__raw_writel(val, cfg_chip3_base);
+
+	ret = davinci_cfg_reg(DA850_GPIO2_6);
 	if (ret)
-		pr_warning("da850_evm_init: nor mux setup failed: %d\n",
+		pr_warning("da850_evm_init:GPIO(2,6) mux setup "
+							"failed\n");
+
+	ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
+	if (ret) {
+		pr_warning("Cannot open GPIO %d\n",
+					DA850_MII_MDIO_CLKEN_PIN);
+		return ret;
+	}
+
+	/* Enable/Disable MII MDIO clock */
+	gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
+
+	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("da850_evm_init: emac registration failed: %d\n",
 				ret);
 
-	da850_evm_init_nor();
+	return 0;
+}
+device_initcall(da850_evm_config_emac);
+
+static __init void da850_evm_init(void)
+{
+	int ret;
 
-	platform_add_devices(da850_evm_devices,
-				ARRAY_SIZE(da850_evm_devices));
+	ret = pmic_tps65070_init();
+	if (ret)
+		pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
+				ret);
 
 	ret = da8xx_register_edma();
 	if (ret)
@@ -299,19 +608,6 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
 				ret);
 
-	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
-	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
-	soc_info->emac_pdata->rmii_en = 0;
-
-	ret = da8xx_pinmux_setup(da850_cpgmac_pins);
-	if (ret)
-		pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n",
-				ret);
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warning("da850_evm_init: emac registration failed: %d\n",
-				ret);
 
 	ret = da8xx_register_watchdog();
 	if (ret)
@@ -319,11 +615,6 @@ static __init void da850_evm_init(void)
 				ret);
 
 	if (HAS_MMC) {
-		if (HAS_NOR)
-			pr_warning("WARNING: both NOR Flash and MMC/SD are "
-				"enabled, but they share AEMIF pins.\n"
-				"\tDisable one of them.\n");
-
 		ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
 		if (ret)
 			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
@@ -365,22 +656,42 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
 				ret);
 
-	da8xx_init_mcasp(0, &da850_evm_snd_data);
+	da8xx_register_mcasp(0, &da850_evm_snd_data);
 
 	ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
 	if (ret)
 		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
 				ret);
 
+	/* Handle board specific muxing for LCD here */
+	ret = da8xx_pinmux_setup(da850_evm_lcdc_pins);
+	if (ret)
+		pr_warning("da850_evm_init: evm specific lcd mux setup "
+				"failed: %d\n",	ret);
+
 	ret = da850_lcd_hw_init();
 	if (ret)
 		pr_warning("da850_evm_init: lcd initialization failed: %d\n",
 				ret);
 
-	ret = da8xx_register_lcdc();
+	ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
 	if (ret)
 		pr_warning("da850_evm_init: lcdc registration failed: %d\n",
 				ret);
+
+	ret = da8xx_register_rtc();
+	if (ret)
+		pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
+
+	ret = da850_register_cpufreq();
+	if (ret)
+		pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_cpuidle();
+	if (ret)
+		pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
+				ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 77e806798822..a9b650dcc172 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -9,15 +9,13 @@
  * or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/i2c.h>
-#include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
@@ -25,20 +23,15 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 
-#include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
-#include <mach/hardware.h>
 #include <mach/dm355.h>
-#include <mach/psc.h>
-#include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
+#include <mach/usb.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
@@ -86,8 +79,9 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_chipsel		= BIT(14),
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.ecc_mode		= NAND_ECC_HW,
 	.options		= NAND_USE_FLASH_BBT,
+	.ecc_bits		= 4,
 };
 
 static struct resource davinci_nand_resources[] = {
@@ -344,7 +338,7 @@ static __init void dm355_evm_init(void)
 	gpio_request(2, "usb_id_toggle");
 	gpio_direction_output(2, USB_ID_VALUE);
 	/* irlml6401 switches over 1A in under 8 msec */
-	setup_usb(500, 8);
+	davinci_setup_usb(1000, 8);
 
 	davinci_setup_mmc(0, &dm355evm_mmc_config);
 	davinci_setup_mmc(1, &dm355evm_mmc_config);
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 84ad5d161a87..21f32eb41e8c 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -8,34 +8,27 @@
  * warranty of any kind, whether express or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/i2c.h>
-#include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 
-#include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
-#include <mach/hardware.h>
 #include <mach/dm355.h>
-#include <mach/psc.h>
-#include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
+#include <mach/usb.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
@@ -270,7 +263,7 @@ static __init void dm355_leopard_init(void)
 	gpio_request(2, "usb_id_toggle");
 	gpio_direction_output(2, USB_ID_VALUE);
 	/* irlml6401 switches over 1A in under 8 msec */
-	setup_usb(500, 8);
+	davinci_setup_usb(1000, 8);
 
 	davinci_setup_mmc(0, &dm355leopard_mmc_config);
 	davinci_setup_mmc(1, &dm355leopard_mmc_config);
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 52dd8046b305..289fe1b7d25a 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -13,9 +13,8 @@
  * GNU General Public License for more details.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
+#include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/clk.h>
@@ -24,20 +23,19 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
-#include <asm/setup.h>
+#include <linux/input.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
+
 #include <mach/mux.h>
-#include <mach/hardware.h>
 #include <mach/dm365.h>
-#include <mach/psc.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/mmc.h>
 #include <mach/nand.h>
-
+#include <mach/keyscan.h>
 
 static inline int have_imager(void)
 {
@@ -144,6 +142,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
 	.ecc_mode		= NAND_ECC_HW,
 	.options		= NAND_USE_FLASH_BBT,
+	.ecc_bits		= 4,
 };
 
 static struct resource davinci_nand_resources[] = {
@@ -176,11 +175,16 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
+static struct snd_platform_data dm365_evm_snd_data;
+
 static struct i2c_board_info i2c_info[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
 		.platform_data	= &eeprom_info,
 	},
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	},
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
@@ -188,6 +192,38 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+#ifdef CONFIG_KEYBOARD_DAVINCI
+static unsigned short dm365evm_keymap[] = {
+	KEY_KP2,
+	KEY_LEFT,
+	KEY_EXIT,
+	KEY_DOWN,
+	KEY_ENTER,
+	KEY_UP,
+	KEY_KP1,
+	KEY_RIGHT,
+	KEY_MENU,
+	KEY_RECORD,
+	KEY_REWIND,
+	KEY_KPMINUS,
+	KEY_STOP,
+	KEY_FASTFORWARD,
+	KEY_KPPLUS,
+	KEY_PLAYPAUSE,
+	0
+};
+
+static struct davinci_ks_platform_data dm365evm_ks_data = {
+	.keymap		= dm365evm_keymap,
+	.keymapsize	= ARRAY_SIZE(dm365evm_keymap),
+	.rep		= 1,
+	/* Scan period = strobe + interval */
+	.strobe		= 0x5,
+	.interval	= 0x2,
+	.matrix_type	= DAVINCI_KEYSCAN_MATRIX_4X4,
+};
+#endif
+
 static int cpld_mmc_get_cd(int module)
 {
 	if (!cpld)
@@ -472,6 +508,13 @@ static __init void dm365_evm_init(void)
 
 	/* maybe setup mmc1/etc ... _after_ mmc0 */
 	evm_init_cpld();
+
+	dm365_init_asp(&dm365_evm_snd_data);
+	dm365_init_rtc();
+
+#ifdef CONFIG_KEYBOARD_DAVINCI
+	dm365_init_ks(&dm365evm_ks_data);
+#endif
 }
 
 static __init void dm365_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 1213a0087ad4..fd0398bc6db3 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -9,45 +9,34 @@
  * or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/memory.h>
-
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
-#include <linux/etherdevice.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <linux/io.h>
 #include <linux/phy.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
 
 #include <media/tvp514x.h>
 
-#include <asm/setup.h>
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/dm644x.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/psc.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
-#include <mach/emac.h>
+#include <mach/usb.h>
 
 #define DM644X_EVM_PHY_MASK		(0x2)
 #define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
@@ -477,7 +466,7 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
 	/* irlml6401 switches over 1A, in under 8 msec;
 	 * now it can be managed by nDRV_VBUS ...
 	 */
-	setup_usb(500, 8);
+	davinci_setup_usb(1000, 8);
 
 	return 0;
 }
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 24e0e13b1492..8d0b0e01c59b 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -17,38 +17,28 @@
  **************************************************************************/
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/root_dev.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
-#include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/i2c/pcf857x.h>
-#include <linux/etherdevice.h>
 
 #include <media/tvp514x.h>
 
-#include <asm/setup.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/dm646x.h>
 #include <mach/common.h>
-#include <mach/psc.h>
 #include <mach/serial.h>
 #include <mach/i2c.h>
-#include <mach/mmc.h>
-#include <mach/emac.h>
+#include <mach/nand.h>
 
 #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
     defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
@@ -57,6 +47,11 @@
 #define HAS_ATA 0
 #endif
 
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x20008000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x42000000
+
+#define NAND_BLOCK_SIZE		SZ_128K
+
 /* CPLD Register 0 bits to control ATA */
 #define DM646X_EVM_ATA_RST		BIT(0)
 #define DM646X_EVM_ATA_PWD		BIT(1)
@@ -92,6 +87,63 @@ static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
 
+/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
+ * and U-Boot environment this avoids dependency on any particular combination
+ * of UBL, U-Boot or flashing tools etc.
+ */
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL, U-Boot with environment */
+		.name		= "bootloader",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_cle 		= 0x80000,
+	.mask_ale 		= 0x40000,
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW,
+	.options		= 0,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
 /* CPLD Register 0 Client: used for I/O Control */
 static int cpld_reg0_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
@@ -142,7 +194,7 @@ static struct gpio_led evm_leds[] = {
 	{ .name = "DS4", .active_low = 1, },
 };
 
-static __initconst struct gpio_led_platform_data evm_led_data = {
+static const struct gpio_led_platform_data evm_led_data = {
 	.num_leds = ARRAY_SIZE(evm_leds),
 	.leds     = evm_leds,
 };
@@ -647,6 +699,8 @@ static __init void evm_init(void)
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 
+	platform_device_register(&davinci_nand_device);
+
 	if (HAS_ATA)
 		dm646x_init_ide();
 
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
new file mode 100644
index 000000000000..bd9ca079b69d
--- /dev/null
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -0,0 +1,323 @@
+/*
+ * Neuros Technologies OSD2 board support
+ *
+ * Modified from original 644X-EVM board support.
+ * 2008 (c) Neuros Technology, LLC.
+ * 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com>
+ * 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com>
+ *
+ * The Neuros OSD 2.0 is the hardware component of the Neuros Open
+ * Internet Television Platform. Hardware is very close to TI
+ * DM644X-EVM board. It has:
+ * 	DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
+ * 	USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
+ * 	Additionaly realtime clock, IR remote control receiver,
+ * 	IR Blaster based on MSP430 (firmware although is different
+ * 	from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
+ * 	with PATA interface, two muxed red-green leds.
+ *
+ * For more information please refer to
+ * 		http://wiki.neurostechnology.com/index.php/OSD_2.0_HD
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/dm644x.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/mux.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/usb.h>
+
+#define NEUROS_OSD2_PHY_MASK		0x2
+#define NEUROS_OSD2_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
+
+#define DAVINCI_CFC_ATA_BASE		 0x01C66000
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE	 0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+#define LXT971_PHY_ID			0x001378e2
+#define LXT971_PHY_MASK			0xfffffff0
+
+#define	NTOSD2_AUDIOSOC_I2C_ADDR	0x18
+#define	NTOSD2_MSP430_I2C_ADDR		0x59
+#define	NTOSD2_MSP430_IRQ		2
+
+/* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA,
+ * 2048 blocks in the device, 64 pages per block, 2048 bytes per
+ * page.
+ */
+
+#define NAND_BLOCK_SIZE		SZ_128K
+
+struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		/* Kernel */
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		/* File System */
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* A few blocks at end hold a flash Bad Block Table. */
+};
+
+static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
+	.parts		= davinci_ntosd2_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+	.options	= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_ntosd2_nandflash_resource[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_ntosd2_nandflash_device = {
+	.name		= "davinci_nand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &davinci_ntosd2_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(davinci_ntosd2_nandflash_resource),
+	.resource	= davinci_ntosd2_nandflash_resource,
+};
+
+static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device davinci_fb_device = {
+	.name		= "davincifb",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &davinci_fb_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources = 0,
+};
+
+static struct resource ide_resources[] = {
+	{
+		.start		= DAVINCI_CFC_ATA_BASE,
+		.end		= DAVINCI_CFC_ATA_BASE + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IRQ_IDE,
+		.end		= IRQ_IDE,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ide_dev = {
+	.name		= "palm_bk3710",
+	.id		= -1,
+	.resource	= ide_resources,
+	.num_resources	= ARRAY_SIZE(ide_resources),
+	.dev = {
+		.dma_mask		= &ide_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+static struct snd_platform_data dm644x_ntosd2_snd_data;
+
+static struct gpio_led ntosd2_leds[] = {
+	{ .name = "led1_green", .gpio = GPIO(10), },
+	{ .name = "led1_red",   .gpio = GPIO(11), },
+	{ .name = "led2_green", .gpio = GPIO(12), },
+	{ .name = "led2_red",   .gpio = GPIO(13), },
+};
+
+static struct gpio_led_platform_data ntosd2_leds_data = {
+	.num_leds	= ARRAY_SIZE(ntosd2_leds),
+	.leds		= ntosd2_leds,
+};
+
+static struct platform_device ntosd2_leds_dev = {
+	.name = "leds-gpio",
+	.id   = -1,
+	.dev = {
+		.platform_data 		= &ntosd2_leds_data,
+	},
+};
+
+
+static struct platform_device *davinci_ntosd2_devices[] __initdata = {
+	&davinci_fb_device,
+	&ntosd2_leds_dev,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init davinci_ntosd2_map_io(void)
+{
+	dm644x_init();
+}
+
+/*
+ I2C initialization
+*/
+static struct davinci_i2c_platform_data ntosd2_i2c_pdata = {
+	.bus_freq	= 20 /* kHz */,
+	.bus_delay	= 100 /* usec */,
+};
+
+static struct i2c_board_info __initdata ntosd2_i2c_info[] =  {
+};
+
+static	int ntosd2_init_i2c(void)
+{
+	int	status;
+
+	davinci_init_i2c(&ntosd2_i2c_pdata);
+	status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type);
+	if (status == 0) {
+		status = gpio_direction_input(NTOSD2_MSP430_IRQ);
+		if (status == 0) {
+			status = gpio_to_irq(NTOSD2_MSP430_IRQ);
+			if (status > 0) {
+				ntosd2_i2c_info[0].irq = status;
+				i2c_register_board_info(1,
+					ntosd2_i2c_info,
+					ARRAY_SIZE(ntosd2_i2c_info));
+			}
+		}
+	}
+	return status;
+}
+
+static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
+	.wires		= 4,
+	.version	= MMC_CTLR_VERSION_1
+};
+
+
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+	defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
+#if defined(CONFIG_MTD_NAND_DAVINCI) || \
+	defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
+#define HAS_NAND 1
+#else
+#define HAS_NAND 0
+#endif
+
+static __init void davinci_ntosd2_init(void)
+{
+	struct clk *aemif_clk;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	int	status;
+
+	aemif_clk = clk_get(NULL, "aemif");
+	clk_enable(aemif_clk);
+
+	if (HAS_ATA) {
+		if (HAS_NAND)
+			pr_warning("WARNING: both IDE and Flash are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable IDE for NAND/NOR support.\n");
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN);
+		davinci_cfg_reg(DM644X_HDIREN);
+		platform_device_register(&ide_dev);
+	} else if (HAS_NAND) {
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
+
+		/* only one device will be jumpered and detected */
+		if (HAS_NAND)
+			platform_device_register(
+					&davinci_ntosd2_nandflash_device);
+	}
+
+	platform_add_devices(davinci_ntosd2_devices,
+				ARRAY_SIZE(davinci_ntosd2_devices));
+
+	/* Initialize I2C interface specific for this board */
+	status = ntosd2_init_i2c();
+	if (status < 0)
+		pr_warning("davinci_ntosd2_init: msp430 irq setup failed:"
+						"	 %d\n", status);
+
+	davinci_serial_init(&uart_config);
+	dm644x_init_asp(&dm644x_ntosd2_snd_data);
+
+	soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY;
+
+	davinci_setup_usb(1000, 8);
+	/*
+	 * Mux the pins to be GPIOs, VLYNQEN is already done at startup.
+	 * The AEAWx are five new AEAW pins that can be muxed by separately.
+	 * They are a bitmask for GPIO management. According TI
+	 * documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ
+	 * gpio(10,11,12,13) for leds any combination of bits works except
+	 * four last. So we are to reset all five.
+	 */
+	davinci_cfg_reg(DM644X_AEAW0);
+	davinci_cfg_reg(DM644X_AEAW1);
+	davinci_cfg_reg(DM644X_AEAW2);
+	davinci_cfg_reg(DM644X_AEAW3);
+	davinci_cfg_reg(DM644X_AEAW4);
+
+	davinci_setup_mmc(0, &davinci_ntosd2_mmc_config);
+}
+
+static __init void davinci_ntosd2_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
+	/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DAVINCI_DDR_BASE + 0x100),
+	.map_io		 = davinci_ntosd2_map_io,
+	.init_irq	= davinci_ntosd2_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine = davinci_ntosd2_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 7acdfd8ac071..08d373bfcc8a 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -23,35 +23,24 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
-
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
-#include <linux/etherdevice.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
 
-#include <asm/setup.h>
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
 #include <mach/dm644x.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
-#include <mach/psc.h>
 #include <mach/mux.h>
+#include <mach/usb.h>
 
 #define SFFSDR_PHY_MASK		(0x2)
 #define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
@@ -107,11 +96,6 @@ static struct platform_device davinci_sffsdr_nandflash_device = {
 	.resource	= davinci_sffsdr_nandflash_resource,
 };
 
-static struct emac_platform_data sffsdr_emac_pdata = {
-	.phy_mask	= SFFSDR_PHY_MASK,
-	.mdio_max_freq	= SFFSDR_MDIO_FREQUENCY,
-};
-
 static struct at24_platform_data eeprom_info = {
 	.byte_len	= (64*1024) / 8,
 	.page_size	= 32,
@@ -164,7 +148,7 @@ static __init void davinci_sffsdr_init(void)
 	davinci_serial_init(&uart_config);
 	soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
-	setup_usb(0, 0); /* We support only peripheral mode. */
+	davinci_setup_usb(0, 0); /* We support only peripheral mode. */
 
 	/* mux VLYNQ pins */
 	davinci_cfg_reg(DM644X_VLYNQEN);
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 83d54d50b5ea..baece65cb9c0 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -17,8 +17,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
-#include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 #include <mach/hardware.h>
 
@@ -42,8 +42,7 @@ static void __clk_enable(struct clk *clk)
 	if (clk->parent)
 		__clk_enable(clk->parent);
 	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
-				clk->lpsc, 1);
+		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 1);
 }
 
 static void __clk_disable(struct clk *clk)
@@ -51,8 +50,7 @@ static void __clk_disable(struct clk *clk)
 	if (WARN_ON(clk->usecount == 0))
 		return;
 	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
-		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
-				clk->lpsc, 0);
+		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 0);
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }
@@ -99,20 +97,74 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
+	if (clk->round_rate)
+		return clk->round_rate(clk, rate);
+
 	return clk->rate;
 }
 EXPORT_SYMBOL(clk_round_rate);
 
+/* Propagate rate to children */
+static void propagate_rate(struct clk *root)
+{
+	struct clk *clk;
+
+	list_for_each_entry(clk, &root->children, childnode) {
+		if (clk->recalc)
+			clk->rate = clk->recalc(clk);
+		propagate_rate(clk);
+	}
+}
+
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
+	unsigned long flags;
+	int ret = -EINVAL;
+
 	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
+		return ret;
 
-	/* changing the clk rate is not supported */
-	return -EINVAL;
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (clk->set_rate)
+		ret = clk->set_rate(clk, rate);
+	if (ret == 0) {
+		if (clk->recalc)
+			clk->rate = clk->recalc(clk);
+		propagate_rate(clk);
+	}
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
 }
 EXPORT_SYMBOL(clk_set_rate);
 
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned long flags;
+
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	/* Cannot change parent on enabled clock */
+	if (WARN_ON(clk->usecount))
+		return -EINVAL;
+
+	mutex_lock(&clocks_mutex);
+	clk->parent = parent;
+	list_del_init(&clk->childnode);
+	list_add(&clk->childnode, &clk->parent->children);
+	mutex_unlock(&clocks_mutex);
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (clk->recalc)
+		clk->rate = clk->recalc(clk);
+	propagate_rate(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
 int clk_register(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
@@ -123,16 +175,24 @@ int clk_register(struct clk *clk)
 			clk->name, clk->parent->name))
 		return -EINVAL;
 
+	INIT_LIST_HEAD(&clk->children);
+
 	mutex_lock(&clocks_mutex);
 	list_add_tail(&clk->node, &clocks);
+	if (clk->parent)
+		list_add_tail(&clk->childnode, &clk->parent->children);
 	mutex_unlock(&clocks_mutex);
 
 	/* If rate is already set, use it */
 	if (clk->rate)
 		return 0;
 
+	/* Else, see if there is a way to calculate it */
+	if (clk->recalc)
+		clk->rate = clk->recalc(clk);
+
 	/* Otherwise, default to parent rate */
-	if (clk->parent)
+	else if (clk->parent)
 		clk->rate = clk->parent->rate;
 
 	return 0;
@@ -146,6 +206,7 @@ void clk_unregister(struct clk *clk)
 
 	mutex_lock(&clocks_mutex);
 	list_del(&clk->node);
+	list_del(&clk->childnode);
 	mutex_unlock(&clocks_mutex);
 }
 EXPORT_SYMBOL(clk_unregister);
@@ -166,11 +227,11 @@ static int __init clk_disable_unused(void)
 			continue;
 
 		/* ignore if in Disabled or SwRstDisable states */
-		if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc))
+		if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc))
 			continue;
 
 		pr_info("Clocks: disable unused %s\n", ck->name);
-		davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0);
+		davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, 0);
 	}
 	spin_unlock_irq(&clockfw_lock);
 
@@ -179,50 +240,62 @@ static int __init clk_disable_unused(void)
 late_initcall(clk_disable_unused);
 #endif
 
-static void clk_sysclk_recalc(struct clk *clk)
+static unsigned long clk_sysclk_recalc(struct clk *clk)
 {
 	u32 v, plldiv;
 	struct pll_data *pll;
+	unsigned long rate = clk->rate;
 
 	/* If this is the PLL base clock, no more calculations needed */
 	if (clk->pll_data)
-		return;
+		return rate;
 
 	if (WARN_ON(!clk->parent))
-		return;
+		return rate;
 
-	clk->rate = clk->parent->rate;
+	rate = clk->parent->rate;
 
 	/* Otherwise, the parent must be a PLL */
 	if (WARN_ON(!clk->parent->pll_data))
-		return;
+		return rate;
 
 	pll = clk->parent->pll_data;
 
 	/* If pre-PLL, source clock is before the multiplier and divider(s) */
 	if (clk->flags & PRE_PLL)
-		clk->rate = pll->input_rate;
+		rate = pll->input_rate;
 
 	if (!clk->div_reg)
-		return;
+		return rate;
 
 	v = __raw_readl(pll->base + clk->div_reg);
 	if (v & PLLDIV_EN) {
 		plldiv = (v & PLLDIV_RATIO_MASK) + 1;
 		if (plldiv)
-			clk->rate /= plldiv;
+			rate /= plldiv;
 	}
+
+	return rate;
+}
+
+static unsigned long clk_leafclk_recalc(struct clk *clk)
+{
+	if (WARN_ON(!clk->parent))
+		return clk->rate;
+
+	return clk->parent->rate;
 }
 
-static void __init clk_pll_init(struct clk *clk)
+static unsigned long clk_pllclk_recalc(struct clk *clk)
 {
 	u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
 	u8 bypass;
 	struct pll_data *pll = clk->pll_data;
+	unsigned long rate = clk->rate;
 
 	pll->base = IO_ADDRESS(pll->phys_base);
 	ctrl = __raw_readl(pll->base + PLLCTL);
-	clk->rate = pll->input_rate = clk->parent->rate;
+	rate = pll->input_rate = clk->parent->rate;
 
 	if (ctrl & PLLCTL_PLLEN) {
 		bypass = 0;
@@ -255,9 +328,9 @@ static void __init clk_pll_init(struct clk *clk)
 	}
 
 	if (!bypass) {
-		clk->rate /= prediv;
-		clk->rate *= mult;
-		clk->rate /= postdiv;
+		rate /= prediv;
+		rate *= mult;
+		rate /= postdiv;
 	}
 
 	pr_debug("PLL%d: input = %lu MHz [ ",
@@ -270,8 +343,90 @@ static void __init clk_pll_init(struct clk *clk)
 		pr_debug("* %d ", mult);
 	if (postdiv > 1)
 		pr_debug("/ %d ", postdiv);
-	pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
+	pr_debug("] --> %lu MHz output.\n", rate / 1000000);
+
+	return rate;
+}
+
+/**
+ * davinci_set_pllrate - set the output rate of a given PLL.
+ *
+ * Note: Currently tested to work with OMAP-L138 only.
+ *
+ * @pll: pll whose rate needs to be changed.
+ * @prediv: The pre divider value. Passing 0 disables the pre-divider.
+ * @pllm: The multiplier value. Passing 0 leads to multiply-by-one.
+ * @postdiv: The post divider value. Passing 0 disables the post-divider.
+ */
+int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
+					unsigned int mult, unsigned int postdiv)
+{
+	u32 ctrl;
+	unsigned int locktime;
+
+	if (pll->base == NULL)
+		return -EINVAL;
+
+	/*
+	 *  PLL lock time required per OMAP-L138 datasheet is
+	 * (2000 * prediv)/sqrt(pllm) OSCIN cycles. We approximate sqrt(pllm)
+	 * as 4 and OSCIN cycle as 25 MHz.
+	 */
+	if (prediv) {
+		locktime = ((2000 * prediv) / 100);
+		prediv = (prediv - 1) | PLLDIV_EN;
+	} else {
+		locktime = 20;
+	}
+	if (postdiv)
+		postdiv = (postdiv - 1) | PLLDIV_EN;
+	if (mult)
+		mult = mult - 1;
+
+	ctrl = __raw_readl(pll->base + PLLCTL);
+
+	/* Switch the PLL to bypass mode */
+	ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
+	__raw_writel(ctrl, pll->base + PLLCTL);
+
+	/*
+	 * Wait for 4 OSCIN/CLKIN cycles to ensure that the PLLC has switched
+	 * to bypass mode. Delay of 1us ensures we are good for all > 4MHz
+	 * OSCIN/CLKIN inputs. Typically the input is ~25MHz.
+	 */
+	udelay(1);
+
+	/* Reset and enable PLL */
+	ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS);
+	__raw_writel(ctrl, pll->base + PLLCTL);
+
+	if (pll->flags & PLL_HAS_PREDIV)
+		__raw_writel(prediv, pll->base + PREDIV);
+
+	__raw_writel(mult, pll->base + PLLM);
+
+	if (pll->flags & PLL_HAS_POSTDIV)
+		__raw_writel(postdiv, pll->base + POSTDIV);
+
+	/*
+	 * Wait for PLL to reset properly, OMAP-L138 datasheet says
+	 * 'min' time = 125ns
+	 */
+	udelay(1);
+
+	/* Bring PLL out of reset */
+	ctrl |= PLLCTL_PLLRST;
+	__raw_writel(ctrl, pll->base + PLLCTL);
+
+	udelay(locktime);
+
+	/* Remove PLL from bypass mode */
+	ctrl |= PLLCTL_PLLEN;
+	__raw_writel(ctrl, pll->base + PLLCTL);
+
+	return 0;
 }
+EXPORT_SYMBOL(davinci_set_pllrate);
 
 int __init davinci_clk_init(struct davinci_clk *clocks)
   {
@@ -281,12 +436,23 @@ int __init davinci_clk_init(struct davinci_clk *clocks)
 	for (c = clocks; c->lk.clk; c++) {
 		clk = c->lk.clk;
 
-		if (clk->pll_data)
-			clk_pll_init(clk);
+		if (!clk->recalc) {
+
+			/* Check if clock is a PLL */
+			if (clk->pll_data)
+				clk->recalc = clk_pllclk_recalc;
+
+			/* Else, if it is a PLL-derived clock */
+			else if (clk->flags & CLK_PLL)
+				clk->recalc = clk_sysclk_recalc;
+
+			/* Otherwise, it is a leaf clock (PSC clock) */
+			else if (clk->parent)
+				clk->recalc = clk_leafclk_recalc;
+		}
 
-		/* Calculate rates for PLL-derived clocks */
-		else if (clk->flags & CLK_PLL)
-			clk_sysclk_recalc(clk);
+		if (clk->recalc)
+			clk->rate = clk->recalc(clk);
 
 		if (clk->lpsc)
 			clk->flags |= CLK_PSC;
@@ -352,9 +518,8 @@ dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
 	/* REVISIT show device associations too */
 
 	/* cost is now small, but not linear... */
-	list_for_each_entry(clk, &clocks, node) {
-		if (clk->parent == parent)
-			dump_clock(s, nest + NEST_DELTA, clk);
+	list_for_each_entry(clk, &parent->children, childnode) {
+		dump_clock(s, nest + NEST_DELTA, clk);
 	}
 }
 
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 27233cb4a2fb..c92d77a3008d 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -22,6 +22,10 @@
 /* PLL/Reset register offsets */
 #define PLLCTL          0x100
 #define PLLCTL_PLLEN    BIT(0)
+#define PLLCTL_PLLPWRDN	BIT(1)
+#define PLLCTL_PLLRST	BIT(3)
+#define PLLCTL_PLLDIS	BIT(4)
+#define PLLCTL_PLLENSRC	BIT(5)
 #define PLLCTL_CLKMODE  BIT(8)
 
 #define PLLM		0x110
@@ -65,15 +69,20 @@ struct clk {
 	const char		*name;
 	unsigned long		rate;
 	u8			usecount;
-	u8			flags;
 	u8			lpsc;
-	u8			psc_ctlr;
+	u8			gpsc;
+	u32			flags;
 	struct clk              *parent;
+	struct list_head	children; 	/* list of children */
+	struct list_head	childnode;	/* parent's child list node */
 	struct pll_data         *pll_data;
 	u32                     div_reg;
+	unsigned long (*recalc) (struct clk *);
+	int (*set_rate) (struct clk *clk, unsigned long rate);
+	int (*round_rate) (struct clk *clk, unsigned long rate);
 };
 
-/* Clock flags */
+/* Clock flags: SoC-specific flags start at BIT(16) */
 #define ALWAYS_ENABLED		BIT(1)
 #define CLK_PSC                 BIT(2)
 #define PSC_DSP                 BIT(3) /* PSC uses DSP domain, not ARM */
@@ -94,6 +103,8 @@ struct davinci_clk {
 	}
 
 int davinci_clk_init(struct davinci_clk *clocks);
+int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
+				unsigned int mult, unsigned int postdiv);
 
 extern struct platform_device davinci_wdt_device;
 
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 61ede19c6b54..c2de94cde56a 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -86,6 +86,8 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 	dip = davinci_get_id(davinci_soc_info.jtag_id);
 	if (!dip) {
 		ret = -EINVAL;
+		pr_err("Unknown DaVinci JTAG ID 0x%x\n",
+						davinci_soc_info.jtag_id);
 		goto err;
 	}
 
@@ -104,5 +106,5 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 	return;
 
 err:
-	pr_err("davinci_common_init: SoC Initialization failed\n");
+	panic("davinci_common_init: SoC Initialization failed\n");
 }
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
index 96c8e97a7deb..52b287cf3a42 100644
--- a/arch/arm/mach-davinci/cp_intc.c
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -10,9 +10,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
new file mode 100644
index 000000000000..d3fa6de1e20f
--- /dev/null
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -0,0 +1,226 @@
+/*
+ * CPU frequency scaling for DaVinci
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
+ *
+ *  Copyright (C) 2005 Nokia Corporation
+ *  Written by Tony Lindgren <tony@atomide.com>
+ *
+ *  Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Updated to support OMAP3
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/cpufreq.h>
+#include <mach/common.h>
+
+#include "clock.h"
+
+struct davinci_cpufreq {
+	struct device *dev;
+	struct clk *armclk;
+};
+static struct davinci_cpufreq cpufreq;
+
+static int davinci_verify_speed(struct cpufreq_policy *policy)
+{
+	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
+	struct clk *armclk = cpufreq.armclk;
+
+	if (freq_table)
+		return cpufreq_frequency_table_verify(policy, freq_table);
+
+	if (policy->cpu)
+		return -EINVAL;
+
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+				     policy->cpuinfo.max_freq);
+
+	policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000;
+	policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000;
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+						policy->cpuinfo.max_freq);
+	return 0;
+}
+
+static unsigned int davinci_getspeed(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+
+	return clk_get_rate(cpufreq.armclk) / 1000;
+}
+
+static int davinci_target(struct cpufreq_policy *policy,
+				unsigned int target_freq, unsigned int relation)
+{
+	int ret = 0;
+	unsigned int idx;
+	struct cpufreq_freqs freqs;
+	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+	struct clk *armclk = cpufreq.armclk;
+
+	/*
+	 * Ensure desired rate is within allowed range.  Some govenors
+	 * (ondemand) will just pass target_freq=0 to get the minimum.
+	 */
+	if (target_freq < policy->cpuinfo.min_freq)
+		target_freq = policy->cpuinfo.min_freq;
+	if (target_freq > policy->cpuinfo.max_freq)
+		target_freq = policy->cpuinfo.max_freq;
+
+	freqs.old = davinci_getspeed(0);
+	freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000;
+	freqs.cpu = 0;
+
+	if (freqs.old == freqs.new)
+		return ret;
+
+	cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER,
+			dev_driver_string(cpufreq.dev),
+			"transition: %u --> %u\n", freqs.old, freqs.new);
+
+	ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
+						freqs.new, relation, &idx);
+	if (ret)
+		return -EINVAL;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* if moving to higher frequency, up the voltage beforehand */
+	if (pdata->set_voltage && freqs.new > freqs.old)
+		pdata->set_voltage(idx);
+
+	ret = clk_set_rate(armclk, idx);
+
+	/* if moving to lower freq, lower the voltage after lowering freq */
+	if (pdata->set_voltage && freqs.new < freqs.old)
+		pdata->set_voltage(idx);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return ret;
+}
+
+static int __init davinci_cpu_init(struct cpufreq_policy *policy)
+{
+	int result = 0;
+	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	/* Finish platform specific initialization */
+	if (pdata->init) {
+		result = pdata->init();
+		if (result)
+			return result;
+	}
+
+	policy->cur = policy->min = policy->max = davinci_getspeed(0);
+
+	if (freq_table) {
+		result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+		if (!result)
+			cpufreq_frequency_table_get_attr(freq_table,
+							policy->cpu);
+	} else {
+		policy->cpuinfo.min_freq = policy->min;
+		policy->cpuinfo.max_freq = policy->max;
+	}
+
+	policy->min = policy->cpuinfo.min_freq;
+	policy->max = policy->cpuinfo.max_freq;
+	policy->cur = davinci_getspeed(0);
+
+	/*
+	 * Time measurement across the target() function yields ~1500-1800us
+	 * time taken with no drivers on notification list.
+	 * Setting the latency to 2000 us to accomodate addition of drivers
+	 * to pre/post change notification list.
+	 */
+	policy->cpuinfo.transition_latency = 2000 * 1000;
+	return 0;
+}
+
+static int davinci_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static struct freq_attr *davinci_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver davinci_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= davinci_verify_speed,
+	.target		= davinci_target,
+	.get		= davinci_getspeed,
+	.init		= davinci_cpu_init,
+	.exit		= davinci_cpu_exit,
+	.name		= "davinci",
+	.attr		= davinci_cpufreq_attr,
+};
+
+static int __init davinci_cpufreq_probe(struct platform_device *pdev)
+{
+	struct davinci_cpufreq_config *pdata = pdev->dev.platform_data;
+
+	if (!pdata)
+		return -EINVAL;
+	if (!pdata->freq_table)
+		return -EINVAL;
+
+	cpufreq.dev = &pdev->dev;
+
+	cpufreq.armclk = clk_get(NULL, "arm");
+	if (IS_ERR(cpufreq.armclk)) {
+		dev_err(cpufreq.dev, "Unable to get ARM clock\n");
+		return PTR_ERR(cpufreq.armclk);
+	}
+
+	return cpufreq_register_driver(&davinci_driver);
+}
+
+static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
+{
+	clk_put(cpufreq.armclk);
+
+	return cpufreq_unregister_driver(&davinci_driver);
+}
+
+static struct platform_driver davinci_cpufreq_driver = {
+	.driver = {
+		.name	 = "cpufreq-davinci",
+		.owner	 = THIS_MODULE,
+	},
+	.remove = __exit_p(davinci_cpufreq_remove),
+};
+
+static int __init davinci_cpufreq_init(void)
+{
+	return platform_driver_probe(&davinci_cpufreq_driver,
+							davinci_cpufreq_probe);
+}
+late_initcall(davinci_cpufreq_init);
+
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
new file mode 100644
index 000000000000..97a90f36fc92
--- /dev/null
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -0,0 +1,197 @@
+/*
+ * CPU idle for DaVinci SoCs
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/
+ *
+ * Derived from Marvell Kirkwood CPU idle code
+ * (arch/arm/mach-kirkwood/cpuidle.c)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+
+#include <mach/cpuidle.h>
+
+#define DAVINCI_CPUIDLE_MAX_STATES	2
+
+struct davinci_ops {
+	void (*enter) (u32 flags);
+	void (*exit) (u32 flags);
+	u32 flags;
+};
+
+/* fields in davinci_ops.flags */
+#define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN	BIT(0)
+
+static struct cpuidle_driver davinci_idle_driver = {
+	.name	= "cpuidle-davinci",
+	.owner	= THIS_MODULE,
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device);
+static void __iomem *ddr2_reg_base;
+
+#define DDR2_SDRCR_OFFSET	0xc
+#define DDR2_SRPD_BIT		BIT(23)
+#define DDR2_LPMODEN_BIT	BIT(31)
+
+static void davinci_save_ddr_power(int enter, bool pdown)
+{
+	u32 val;
+
+	val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET);
+
+	if (enter) {
+		if (pdown)
+			val |= DDR2_SRPD_BIT;
+		else
+			val &= ~DDR2_SRPD_BIT;
+		val |= DDR2_LPMODEN_BIT;
+	} else {
+		val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT);
+	}
+
+	__raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET);
+}
+
+static void davinci_c2state_enter(u32 flags)
+{
+	davinci_save_ddr_power(1, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
+}
+
+static void davinci_c2state_exit(u32 flags)
+{
+	davinci_save_ddr_power(0, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
+}
+
+static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = {
+	[1] = {
+		.enter	= davinci_c2state_enter,
+		.exit	= davinci_c2state_exit,
+	},
+};
+
+/* Actual code that puts the SoC in different idle states */
+static int davinci_enter_idle(struct cpuidle_device *dev,
+						struct cpuidle_state *state)
+{
+	struct davinci_ops *ops = cpuidle_get_statedata(state);
+	struct timeval before, after;
+	int idle_time;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+
+	if (ops && ops->enter)
+		ops->enter(ops->flags);
+	/* Wait for interrupt state */
+	cpu_do_idle();
+	if (ops && ops->exit)
+		ops->exit(ops->flags);
+
+	do_gettimeofday(&after);
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+			(after.tv_usec - before.tv_usec);
+	return idle_time;
+}
+
+static int __init davinci_cpuidle_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct cpuidle_device *device;
+	struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
+	struct resource *ddr2_regs;
+	resource_size_t len;
+
+	device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "cannot get platform data\n");
+		return -ENOENT;
+	}
+
+	ddr2_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!ddr2_regs) {
+		dev_err(&pdev->dev, "cannot get DDR2 controller register base");
+		return -ENODEV;
+	}
+
+	len = resource_size(ddr2_regs);
+
+	ddr2_regs = request_mem_region(ddr2_regs->start, len, ddr2_regs->name);
+	if (!ddr2_regs)
+		return -EBUSY;
+
+	ddr2_reg_base = ioremap(ddr2_regs->start, len);
+	if (!ddr2_reg_base) {
+		ret = -ENOMEM;
+		goto ioremap_fail;
+	}
+
+	ret = cpuidle_register_driver(&davinci_idle_driver);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register driver\n");
+		goto driver_register_fail;
+	}
+
+	/* Wait for interrupt state */
+	device->states[0].enter = davinci_enter_idle;
+	device->states[0].exit_latency = 1;
+	device->states[0].target_residency = 10000;
+	device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[0].name, "WFI");
+	strcpy(device->states[0].desc, "Wait for interrupt");
+
+	/* Wait for interrupt and DDR self refresh state */
+	device->states[1].enter = davinci_enter_idle;
+	device->states[1].exit_latency = 10;
+	device->states[1].target_residency = 10000;
+	device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[1].name, "DDR SR");
+	strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+	if (pdata->ddr2_pdown)
+		davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN;
+	cpuidle_set_statedata(&device->states[1], &davinci_states[1]);
+
+	device->state_count = DAVINCI_CPUIDLE_MAX_STATES;
+
+	ret = cpuidle_register_device(device);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register device\n");
+		goto device_register_fail;
+	}
+
+	return 0;
+
+device_register_fail:
+	cpuidle_unregister_driver(&davinci_idle_driver);
+driver_register_fail:
+	iounmap(ddr2_reg_base);
+ioremap_fail:
+	release_mem_region(ddr2_regs->start, len);
+	return ret;
+}
+
+static struct platform_driver davinci_cpuidle_driver = {
+	.driver = {
+		.name	= "cpuidle-davinci",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init davinci_cpuidle_init(void)
+{
+	return platform_driver_probe(&davinci_cpuidle_driver,
+						davinci_cpuidle_probe);
+}
+device_initcall(davinci_cpuidle_init);
+
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 19b2748357fc..b22b5cf04250 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -8,22 +8,17 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
-#include <linux/platform_device.h>
 
 #include <asm/mach/map.h>
 
-#include <mach/clock.h>
 #include <mach/psc.h>
-#include <mach/mux.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -193,14 +188,14 @@ static struct clk uart1_clk = {
 	.name		= "uart1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_UART1,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk uart2_clk = {
 	.name		= "uart2",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_UART2,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk spi0_clk = {
@@ -213,98 +208,98 @@ static struct clk spi1_clk = {
 	.name		= "spi1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_SPI1,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk ecap0_clk = {
 	.name		= "ecap0",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_ECAP,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk ecap1_clk = {
 	.name		= "ecap1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_ECAP,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk ecap2_clk = {
 	.name		= "ecap2",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_ECAP,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk pwm0_clk = {
 	.name		= "pwm0",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_PWM,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk pwm1_clk = {
 	.name		= "pwm1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_PWM,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk pwm2_clk = {
 	.name		= "pwm2",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_PWM,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk eqep0_clk = {
 	.name		= "eqep0",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA830_LPSC1_EQEP,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk eqep1_clk = {
 	.name		= "eqep1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA830_LPSC1_EQEP,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk lcdc_clk = {
 	.name		= "lcdc",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_LCDC,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk mcasp0_clk = {
 	.name		= "mcasp0",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_McASP0,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk mcasp1_clk = {
 	.name		= "mcasp1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA830_LPSC1_McASP1,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk mcasp2_clk = {
 	.name		= "mcasp2",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA830_LPSC1_McASP2,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk usb20_clk = {
 	.name		= "usb20",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_USB20,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk aemif_clk = {
@@ -332,36 +327,36 @@ static struct clk emac_clk = {
 	.name		= "emac",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_CPGMAC,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk gpio_clk = {
 	.name		= "gpio",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_GPIO,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk i2c1_clk = {
 	.name		= "i2c1",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_I2C,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk usb11_clk = {
 	.name		= "usb11",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_USB11,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk emif3_clk = {
 	.name		= "emif3",
 	.parent		= &pll0_sysclk5,
 	.lpsc		= DA8XX_LPSC1_EMIF3C,
+	.gpsc		= 1,
 	.flags		= ALWAYS_ENABLED,
-	.psc_ctlr	= 1,
 };
 
 static struct clk arm_clk = {
@@ -411,7 +406,7 @@ static struct davinci_clk da830_clks[] = {
 	CLK(NULL,		"pwm2",		&pwm2_clk),
 	CLK("eqep.0",		NULL,		&eqep0_clk),
 	CLK("eqep.1",		NULL,		&eqep1_clk),
-	CLK("da830_lcdc",	NULL,		&lcdc_clk),
+	CLK("da8xx_lcdc.0",	NULL,		&lcdc_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp0_clk),
 	CLK("davinci-mcasp.1",	NULL,		&mcasp1_clk),
 	CLK("davinci-mcasp.2",	NULL,		&mcasp2_clk),
@@ -1143,7 +1138,21 @@ static struct davinci_id da830_ids[] = {
 		.part_no	= 0xb7df,
 		.manufacturer	= 0x017,	/* 0x02f >> 1 */
 		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap l137",
+		.name		= "da830/omap-l137 rev1.0",
+	},
+	{
+		.variant	= 0x8,
+		.part_no	= 0xb7df,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DA830,
+		.name		= "da830/omap-l137 rev1.1",
+	},
+	{
+		.variant	= 0x9,
+		.part_no	= 0xb7df,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DA830,
+		.name		= "da830/omap-l137 rev2.0",
 	},
 };
 
@@ -1178,13 +1187,11 @@ static struct davinci_timer_info da830_timer_info = {
 static struct davinci_soc_info davinci_soc_info_da830 = {
 	.io_desc		= da830_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
-	.jtag_id_base		= IO_ADDRESS(DA8XX_JTAG_ID_REG),
 	.ids			= da830_ids,
 	.ids_num		= ARRAY_SIZE(da830_ids),
 	.cpu_clks		= da830_clks,
 	.psc_bases		= da830_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(da830_psc_bases),
-	.pinmux_base		= IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
 	.pinmux_pins		= da830_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
 	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
@@ -1201,5 +1208,13 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
 
 void __init da830_init(void)
 {
+	da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
+	if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+		return;
+
+	davinci_soc_info_da830.jtag_id_base =
+					DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
+	davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+
 	davinci_common_init(&davinci_soc_info_da830);
 }
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 192d719a47df..717806c6cef9 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,31 +11,41 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/regulator/consumer.h>
 
 #include <asm/mach/map.h>
 
-#include <mach/clock.h>
 #include <mach/psc.h>
-#include <mach/mux.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
+#include <mach/cpufreq.h>
 
 #include "clock.h"
 #include "mux.h"
 
+/* SoC specific clock flags */
+#define DA850_CLK_ASYNC3	BIT(16)
+
 #define DA850_PLL1_BASE		0x01e1a000
 #define DA850_TIMER64P2_BASE	0x01f0c000
 #define DA850_TIMER64P3_BASE	0x01f0d000
 
 #define DA850_REF_FREQ		24000000
 
+#define CFGCHIP3_ASYNC3_CLKSRC	BIT(4)
+#define CFGCHIP0_PLL_MASTER_LOCK	BIT(4)
+
+static int da850_set_armrate(struct clk *clk, unsigned long rate);
+static int da850_round_armrate(struct clk *clk, unsigned long rate);
+static int da850_set_pll0rate(struct clk *clk, unsigned long armrate);
+
 static struct pll_data pll0_data = {
 	.num		= 1,
 	.phys_base	= DA8XX_PLL0_BASE,
@@ -52,6 +62,7 @@ static struct clk pll0_clk = {
 	.parent		= &ref_clk,
 	.pll_data	= &pll0_data,
 	.flags		= CLK_PLL,
+	.set_rate	= da850_set_pll0rate,
 };
 
 static struct clk pll0_aux_clk = {
@@ -210,16 +221,16 @@ static struct clk tpcc1_clk = {
 	.name		= "tpcc1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA850_LPSC1_TPCC1,
+	.gpsc		= 1,
 	.flags		= CLK_PSC | ALWAYS_ENABLED,
-	.psc_ctlr	= 1,
 };
 
 static struct clk tptc2_clk = {
 	.name		= "tptc2",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA850_LPSC1_TPTC2,
+	.gpsc		= 1,
 	.flags		= ALWAYS_ENABLED,
-	.psc_ctlr	= 1,
 };
 
 static struct clk uart0_clk = {
@@ -232,14 +243,16 @@ static struct clk uart1_clk = {
 	.name		= "uart1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_UART1,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
+	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk uart2_clk = {
 	.name		= "uart2",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_UART2,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
+	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk aintc_clk = {
@@ -253,22 +266,22 @@ static struct clk gpio_clk = {
 	.name		= "gpio",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_GPIO,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk i2c1_clk = {
 	.name		= "i2c1",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_I2C,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk emif3_clk = {
 	.name		= "emif3",
 	.parent		= &pll0_sysclk5,
 	.lpsc		= DA8XX_LPSC1_EMIF3C,
+	.gpsc		= 1,
 	.flags		= ALWAYS_ENABLED,
-	.psc_ctlr	= 1,
 };
 
 static struct clk arm_clk = {
@@ -276,6 +289,8 @@ static struct clk arm_clk = {
 	.parent		= &pll0_sysclk6,
 	.lpsc		= DA8XX_LPSC0_ARM,
 	.flags		= ALWAYS_ENABLED,
+	.set_rate	= da850_set_armrate,
+	.round_rate	= da850_round_armrate,
 };
 
 static struct clk rmii_clk = {
@@ -287,21 +302,22 @@ static struct clk emac_clk = {
 	.name		= "emac",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_CPGMAC,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk mcasp_clk = {
 	.name		= "mcasp",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_McASP0,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
+	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk lcdc_clk = {
 	.name		= "lcdc",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_LCDC,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk mmcsd_clk = {
@@ -404,6 +420,14 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, MII_RXD_0,	3,	28,	15,	8,	false)
 	MUX_CFG(DA850, MDIO_CLK,	4,	0,	15,	8,	false)
 	MUX_CFG(DA850, MDIO_D,		4,	4,	15,	8,	false)
+	MUX_CFG(DA850, RMII_TXD_0,	14,	12,	15,	8,	false)
+	MUX_CFG(DA850, RMII_TXD_1,	14,	8,	15,	8,	false)
+	MUX_CFG(DA850, RMII_TXEN,	14,	16,	15,	8,	false)
+	MUX_CFG(DA850, RMII_CRS_DV,	15,	4,	15,	8,	false)
+	MUX_CFG(DA850, RMII_RXD_0,	14,	24,	15,	8,	false)
+	MUX_CFG(DA850, RMII_RXD_1,	14,	20,	15,	8,	false)
+	MUX_CFG(DA850, RMII_RXER,	14,	28,	15,	8,	false)
+	MUX_CFG(DA850, RMII_MHZ_50_CLK,	15,	0,	15,	0,	false)
 	/* McASP function */
 	MUX_CFG(DA850,	ACLKR,		0,	0,	15,	1,	false)
 	MUX_CFG(DA850,	ACLKX,		0,	4,	15,	1,	false)
@@ -506,8 +530,9 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, EMA_WAIT_1,	6,	24,	15,	1,	false)
 	MUX_CFG(DA850, NEMA_CS_2,	7,	0,	15,	1,	false)
 	/* GPIO function */
+	MUX_CFG(DA850, GPIO2_6,		6,	4,	15,	8,	false)
+	MUX_CFG(DA850, GPIO2_8,		5,	28,	15,	8,	false)
 	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
-	MUX_CFG(DA850, GPIO8_10,	18,	28,	15,	8,	false)
 	MUX_CFG(DA850, GPIO4_0,		10,	28,	15,	8,	false)
 	MUX_CFG(DA850, GPIO4_1,		10,	24,	15,	8,	false)
 #endif
@@ -547,6 +572,14 @@ const short da850_cpgmac_pins[] __initdata = {
 	-1
 };
 
+const short da850_rmii_pins[] __initdata = {
+	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
+	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
+	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
+	DA850_MDIO_D,
+	-1
+};
+
 const short da850_mcasp_pins[] __initdata = {
 	DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
 	DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
@@ -555,12 +588,11 @@ const short da850_mcasp_pins[] __initdata = {
 };
 
 const short da850_lcdcntl_pins[] __initdata = {
-	DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4,
-	DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8,
-	DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, DA850_LCD_D_12,
-	DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, DA850_LCD_PCLK,
-	DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, DA850_GPIO2_15,
-	DA850_GPIO8_10,
+	DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3,
+	DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7,
+	DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11,
+	DA850_LCD_D_12, DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15,
+	DA850_LCD_PCLK, DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS,
 	-1
 };
 
@@ -790,16 +822,221 @@ static struct davinci_timer_info da850_timer_info = {
 	.clocksource_id	= T0_TOP,
 };
 
+static void da850_set_async3_src(int pllnum)
+{
+	struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2;
+	struct davinci_clk *c;
+	unsigned int v;
+	int ret;
+
+	for (c = da850_clks; c->lk.clk; c++) {
+		clk = c->lk.clk;
+		if (clk->flags & DA850_CLK_ASYNC3) {
+			ret = clk_set_parent(clk, newparent);
+			WARN(ret, "DA850: unable to re-parent clock %s",
+								clk->name);
+		}
+       }
+
+	v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+	if (pllnum)
+		v |= CFGCHIP3_ASYNC3_CLKSRC;
+	else
+		v &= ~CFGCHIP3_ASYNC3_CLKSRC;
+	__raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Notes:
+ * According to the TRM, minimum PLLM results in maximum power savings.
+ * The OPP definitions below should keep the PLLM as low as possible.
+ *
+ * The output of the PLLM must be between 400 to 600 MHz.
+ * This rules out prediv of anything but divide-by-one for 24Mhz OSC input.
+ */
+struct da850_opp {
+	unsigned int	freq;	/* in KHz */
+	unsigned int	prediv;
+	unsigned int	mult;
+	unsigned int	postdiv;
+	unsigned int	cvdd_min; /* in uV */
+	unsigned int	cvdd_max; /* in uV */
+};
+
+static const struct da850_opp da850_opp_300 = {
+	.freq		= 300000,
+	.prediv		= 1,
+	.mult		= 25,
+	.postdiv	= 2,
+	.cvdd_min	= 1140000,
+	.cvdd_max	= 1320000,
+};
+
+static const struct da850_opp da850_opp_200 = {
+	.freq		= 200000,
+	.prediv		= 1,
+	.mult		= 25,
+	.postdiv	= 3,
+	.cvdd_min	= 1050000,
+	.cvdd_max	= 1160000,
+};
+
+static const struct da850_opp da850_opp_96 = {
+	.freq		= 96000,
+	.prediv		= 1,
+	.mult		= 20,
+	.postdiv	= 5,
+	.cvdd_min	= 950000,
+	.cvdd_max	= 1050000,
+};
+
+#define OPP(freq) 		\
+	{				\
+		.index = (unsigned int) &da850_opp_##freq,	\
+		.frequency = freq * 1000, \
+	}
+
+static struct cpufreq_frequency_table da850_freq_table[] = {
+	OPP(300),
+	OPP(200),
+	OPP(96),
+	{
+		.index		= 0,
+		.frequency	= CPUFREQ_TABLE_END,
+	},
+};
+
+#ifdef CONFIG_REGULATOR
+static struct regulator *cvdd;
+
+static int da850_set_voltage(unsigned int index)
+{
+	struct da850_opp *opp;
+
+	if (!cvdd)
+		return -ENODEV;
+
+	opp = (struct da850_opp *) da850_freq_table[index].index;
+
+	return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
+}
+
+static int da850_regulator_init(void)
+{
+	cvdd = regulator_get(NULL, "cvdd");
+	if (WARN(IS_ERR(cvdd), "Unable to obtain voltage regulator for CVDD;"
+					" voltage scaling unsupported\n")) {
+		return PTR_ERR(cvdd);
+	}
+
+	return 0;
+}
+#endif
+
+static struct davinci_cpufreq_config cpufreq_info = {
+	.freq_table = &da850_freq_table[0],
+#ifdef CONFIG_REGULATOR
+	.init = da850_regulator_init,
+	.set_voltage = da850_set_voltage,
+#endif
+};
+
+static struct platform_device da850_cpufreq_device = {
+	.name			= "cpufreq-davinci",
+	.dev = {
+		.platform_data	= &cpufreq_info,
+	},
+};
+
+int __init da850_register_cpufreq(void)
+{
+	return platform_device_register(&da850_cpufreq_device);
+}
+
+static int da850_round_armrate(struct clk *clk, unsigned long rate)
+{
+	int i, ret = 0, diff;
+	unsigned int best = (unsigned int) -1;
+
+	rate /= 1000; /* convert to kHz */
+
+	for (i = 0; da850_freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+		diff = da850_freq_table[i].frequency - rate;
+		if (diff < 0)
+			diff = -diff;
+
+		if (diff < best) {
+			best = diff;
+			ret = da850_freq_table[i].frequency;
+		}
+	}
+
+	return ret * 1000;
+}
+
+static int da850_set_armrate(struct clk *clk, unsigned long index)
+{
+	struct clk *pllclk = &pll0_clk;
+
+	return clk_set_rate(pllclk, index);
+}
+
+static int da850_set_pll0rate(struct clk *clk, unsigned long index)
+{
+	unsigned int prediv, mult, postdiv;
+	struct da850_opp *opp;
+	struct pll_data *pll = clk->pll_data;
+	unsigned int v;
+	int ret;
+
+	opp = (struct da850_opp *) da850_freq_table[index].index;
+	prediv = opp->prediv;
+	mult = opp->mult;
+	postdiv = opp->postdiv;
+
+	/* Unlock writing to PLL registers */
+	v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
+	v &= ~CFGCHIP0_PLL_MASTER_LOCK;
+	__raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
+
+	ret = davinci_set_pllrate(pll, prediv, mult, postdiv);
+	if (WARN_ON(ret))
+		return ret;
+
+	return 0;
+}
+#else
+int __init da850_register_cpufreq(void)
+{
+	return 0;
+}
+
+static int da850_set_armrate(struct clk *clk, unsigned long rate)
+{
+	return -EINVAL;
+}
+
+static int da850_set_pll0rate(struct clk *clk, unsigned long armrate)
+{
+	return -EINVAL;
+}
+
+static int da850_round_armrate(struct clk *clk, unsigned long rate)
+{
+	return clk->rate;
+}
+#endif
+
+
 static struct davinci_soc_info davinci_soc_info_da850 = {
 	.io_desc		= da850_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
-	.jtag_id_base		= IO_ADDRESS(DA8XX_JTAG_ID_REG),
 	.ids			= da850_ids,
 	.ids_num		= ARRAY_SIZE(da850_ids),
 	.cpu_clks		= da850_clks,
 	.psc_bases		= da850_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(da850_psc_bases),
-	.pinmux_base		= IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
 	.pinmux_pins		= da850_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(da850_pins),
 	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
@@ -816,5 +1053,22 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 
 void __init da850_init(void)
 {
+	da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
+	if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+		return;
+
+	davinci_soc_info_da850.jtag_id_base =
+					DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
+	davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+
 	davinci_common_init(&davinci_soc_info_da850);
+
+	/*
+	 * Move the clock source of Async3 domain to PLL1 SYSCLK2.
+	 * This helps keeping the peripherals on this domain insulated
+	 * from CPU frequency changes caused by DVFS. The firmware sets
+	 * both PLL0 and PLL1 to the same frequency so, there should not
+	 * be any noticible change even in non-DVFS use cases.
+	 */
+	da850_set_async3_src(1);
 }
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 58ad5b66fd60..dd2d32c4ce86 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -10,8 +10,6 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-#include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
@@ -21,7 +19,7 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <video/da8xx-fb.h>
+#include <mach/cpuidle.h>
 
 #include "clock.h"
 
@@ -30,6 +28,7 @@
 #define DA8XX_TPTC1_BASE		0x01c08400
 #define DA8XX_WDOG_BASE			0x01c21000 /* DA8XX_TIMER64P1_BASE */
 #define DA8XX_I2C0_BASE			0x01c22000
+#define DA8XX_RTC_BASE			0x01C23000
 #define DA8XX_EMAC_CPPI_PORT_BASE	0x01e20000
 #define DA8XX_EMAC_CPGMACSS_BASE	0x01e22000
 #define DA8XX_EMAC_CPGMAC_BASE		0x01e23000
@@ -43,6 +42,8 @@
 #define DA8XX_MDIO_REG_OFFSET		0x4000
 #define DA8XX_EMAC_CTRL_RAM_SIZE	SZ_8K
 
+void __iomem *da8xx_syscfg_base;
+
 static struct plat_serial8250_port da8xx_serial_pdata[] = {
 	{
 		.mapbase	= DA8XX_UART0_BASE,
@@ -282,6 +283,11 @@ static struct platform_device da8xx_emac_device = {
 	.resource	= da8xx_emac_resources,
 };
 
+int __init da8xx_register_emac(void)
+{
+	return platform_device_register(&da8xx_emac_device);
+}
+
 static struct resource da830_mcasp1_resources[] = {
 	{
 		.name	= "mcasp1",
@@ -338,12 +344,7 @@ static struct platform_device da850_mcasp_device = {
 	.resource	= da850_mcasp_resources,
 };
 
-int __init da8xx_register_emac(void)
-{
-	return platform_device_register(&da8xx_emac_device);
-}
-
-void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata)
+void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
 {
 	/* DA830/OMAP-L137 has 3 instances of McASP */
 	if (cpu_is_davinci_da830() && id == 1) {
@@ -379,10 +380,16 @@ static struct lcd_ctrl_config lcd_cfg = {
 	.raster_order		= 0,
 };
 
-static struct da8xx_lcdc_platform_data da850_evm_lcdc_pdata = {
-	.manu_name = "sharp",
-	.controller_data = &lcd_cfg,
-	.type = "Sharp_LK043T1DG01",
+struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = {
+	.manu_name		= "sharp",
+	.controller_data	= &lcd_cfg,
+	.type			= "Sharp_LCD035Q3DG01",
+};
+
+struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata = {
+	.manu_name		= "sharp",
+	.controller_data	= &lcd_cfg,
+	.type			= "Sharp_LK043T1DG01",
 };
 
 static struct resource da8xx_lcdc_resources[] = {
@@ -398,19 +405,17 @@ static struct resource da8xx_lcdc_resources[] = {
 	},
 };
 
-static struct platform_device da850_lcdc_device = {
+static struct platform_device da8xx_lcdc_device = {
 	.name		= "da8xx_lcdc",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(da8xx_lcdc_resources),
 	.resource	= da8xx_lcdc_resources,
-	.dev = {
-		.platform_data = &da850_evm_lcdc_pdata,
-	}
 };
 
-int __init da8xx_register_lcdc(void)
+int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata)
 {
-	return platform_device_register(&da850_lcdc_device);
+	da8xx_lcdc_device.dev.platform_data = pdata;
+	return platform_device_register(&da8xx_lcdc_device);
 }
 
 static struct resource da8xx_mmcsd0_resources[] = {
@@ -448,3 +453,66 @@ int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config)
 	da8xx_mmcsd0_device.dev.platform_data = config;
 	return platform_device_register(&da8xx_mmcsd0_device);
 }
+
+static struct resource da8xx_rtc_resources[] = {
+	{
+		.start		= DA8XX_RTC_BASE,
+		.end		= DA8XX_RTC_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{ /* timer irq */
+		.start		= IRQ_DA8XX_RTC,
+		.end		= IRQ_DA8XX_RTC,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{ /* alarm irq */
+		.start		= IRQ_DA8XX_RTC,
+		.end		= IRQ_DA8XX_RTC,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_rtc_device = {
+	.name           = "omap_rtc",
+	.id             = -1,
+	.num_resources	= ARRAY_SIZE(da8xx_rtc_resources),
+	.resource	= da8xx_rtc_resources,
+};
+
+int da8xx_register_rtc(void)
+{
+	/* Unlock the rtc's registers */
+	__raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c));
+	__raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70));
+
+	return platform_device_register(&da8xx_rtc_device);
+}
+
+static struct resource da8xx_cpuidle_resources[] = {
+	{
+		.start		= DA8XX_DDR2_CTL_BASE,
+		.end		= DA8XX_DDR2_CTL_BASE + SZ_32K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+/* DA8XX devices support DDR2 power down */
+static struct davinci_cpuidle_config da8xx_cpuidle_pdata = {
+	.ddr2_pdown	= 1,
+};
+
+
+static struct platform_device da8xx_cpuidle_device = {
+	.name			= "cpuidle-davinci",
+	.num_resources		= ARRAY_SIZE(da8xx_cpuidle_resources),
+	.resource		= da8xx_cpuidle_resources,
+	.dev = {
+		.platform_data	= &da8xx_cpuidle_pdata,
+	},
+};
+
+int __init da8xx_register_cpuidle(void)
+{
+	return platform_device_register(&da8xx_cpuidle_device);
+}
+
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index a55b650db71e..147949650c25 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -9,15 +9,11 @@
  * (at your option) any later version.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 
-#include <asm/mach/map.h>
-
 #include <mach/hardware.h>
 #include <mach/i2c.h>
 #include <mach/irqs.h>
@@ -177,7 +173,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
 			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
 							SZ_4K - 1;
-			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1;
+			mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1;
 		} else
 			break;
 
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 059670018aff..dedf4d4f3a27 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -8,7 +8,6 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
@@ -21,7 +20,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/dm355.h>
-#include <mach/clock.h>
 #include <mach/cputype.h>
 #include <mach/edma.h>
 #include <mach/psc.h>
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index e81517434703..2ec619ec1657 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -12,7 +12,6 @@
  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
@@ -23,7 +22,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/dm365.h>
-#include <mach/clock.h>
 #include <mach/cputype.h>
 #include <mach/edma.h>
 #include <mach/psc.h>
@@ -32,6 +30,8 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
+#include <mach/keyscan.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -369,7 +369,7 @@ static struct clk timer3_clk = {
 
 static struct clk usb_clk = {
 	.name		= "usb",
-	.parent		= &pll2_sysclk1,
+	.parent		= &pll1_aux_clk,
 	.lpsc		= DAVINCI_LPSC_USB,
 };
 
@@ -456,7 +456,7 @@ static struct davinci_clk dm365_clks[] = {
 	CLK(NULL, "usb", &usb_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("voice_codec", NULL, &voicecodec_clk),
-	CLK("soc-audio.0", NULL, &asp0_clk),
+	CLK("davinci-asp.0", NULL, &asp0_clk),
 	CLK(NULL, "rto", &rto_clk),
 	CLK(NULL, "mjcp", &mjcp_clk),
 	CLK(NULL, NULL, NULL),
@@ -531,7 +531,7 @@ MUX_CFG(DM365,  EMAC_CRS,	3,   2,     1,    1,     false)
 MUX_CFG(DM365,  EMAC_MDIO,	3,   1,     1,    1,     false)
 MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
 
-MUX_CFG(DM365,	KEYPAD,		2,   0,     0x3f, 0x3f,  false)
+MUX_CFG(DM365,	KEYSCAN,	2,   0,     0x3f, 0x3f,  false)
 
 MUX_CFG(DM365,	PWM0,		1,   0,     3,    2,     false)
 MUX_CFG(DM365,	PWM0_G23,	3,   26,    3,    3,     false)
@@ -603,6 +603,9 @@ INT_CFG(DM365,  INT_IMX1_ENABLE,     24,    1,    1,     false)
 INT_CFG(DM365,  INT_IMX1_DISABLE,    24,    1,    0,     false)
 INT_CFG(DM365,  INT_NSF_ENABLE,      25,    1,    1,     false)
 INT_CFG(DM365,  INT_NSF_DISABLE,     25,    1,    0,     false)
+
+EVT_CFG(DM365,	EVT2_ASP_TX,         0,     1,    0,     false)
+EVT_CFG(DM365,	EVT3_ASP_RX,         1,     1,    0,     false)
 #endif
 };
 
@@ -696,6 +699,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 	[IRQ_I2C]			= 3,
 	[IRQ_UARTINT0]			= 3,
 	[IRQ_UARTINT1]			= 3,
+	[IRQ_DM365_RTCINT]		= 3,
 	[IRQ_DM365_SPIINT0_0]		= 3,
 	[IRQ_DM365_SPIINT3_0]		= 3,
 	[IRQ_DM365_GPIO0]		= 3,
@@ -806,6 +810,50 @@ static struct platform_device dm365_edma_device = {
 	.resource		= edma_resources,
 };
 
+static struct resource dm365_asp_resources[] = {
+	{
+		.start	= DAVINCI_DM365_ASP0_BASE,
+		.end	= DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP0_TX,
+		.end	= DAVINCI_DMA_ASP0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP0_RX,
+		.end	= DAVINCI_DMA_ASP0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm365_asp_device = {
+	.name		= "davinci-asp",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm365_asp_resources),
+	.resource	= dm365_asp_resources,
+};
+
+static struct resource dm365_rtc_resources[] = {
+	{
+		.start = DM365_RTC_BASE,
+		.end = DM365_RTC_BASE + SZ_1K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_DM365_RTCINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm365_rtc_device = {
+	.name = "rtc_davinci",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(dm365_rtc_resources),
+	.resource = dm365_rtc_resources,
+};
+
 static struct map_desc dm365_io_desc[] = {
 	{
 		.virtual	= IO_VIRT,
@@ -822,6 +870,28 @@ static struct map_desc dm365_io_desc[] = {
 	},
 };
 
+static struct resource dm365_ks_resources[] = {
+	{
+		/* registers */
+		.start = DM365_KEYSCAN_BASE,
+		.end = DM365_KEYSCAN_BASE + SZ_1K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		/* interrupt */
+		.start = IRQ_DM365_KEYINT,
+		.end = IRQ_DM365_KEYINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm365_ks_device = {
+	.name		= "davinci_keyscan",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm365_ks_resources),
+	.resource	= dm365_ks_resources,
+};
+
 /* Contents of JTAG ID register used to identify exact cpu type */
 static struct davinci_id dm365_ids[] = {
 	{
@@ -907,6 +977,33 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.sram_len		= SZ_32K,
 };
 
+void __init dm365_init_asp(struct snd_platform_data *pdata)
+{
+	davinci_cfg_reg(DM365_MCBSP0_BDX);
+	davinci_cfg_reg(DM365_MCBSP0_X);
+	davinci_cfg_reg(DM365_MCBSP0_BFSX);
+	davinci_cfg_reg(DM365_MCBSP0_BDR);
+	davinci_cfg_reg(DM365_MCBSP0_R);
+	davinci_cfg_reg(DM365_MCBSP0_BFSR);
+	davinci_cfg_reg(DM365_EVT2_ASP_TX);
+	davinci_cfg_reg(DM365_EVT3_ASP_RX);
+	dm365_asp_device.dev.platform_data = pdata;
+	platform_device_register(&dm365_asp_device);
+}
+
+void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
+{
+	davinci_cfg_reg(DM365_KEYSCAN);
+	dm365_ks_device.dev.platform_data = pdata;
+	platform_device_register(&dm365_ks_device);
+}
+
+void __init dm365_init_rtc(void)
+{
+	davinci_cfg_reg(DM365_INT_PRTCSS);
+	platform_device_register(&dm365_rtc_device);
+}
+
 void __init dm365_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm365);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d6e0fa5a8d8a..2cd008156dea 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -8,7 +8,6 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
@@ -18,7 +17,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/dm644x.h>
-#include <mach/clock.h>
 #include <mach/cputype.h>
 #include <mach/edma.h>
 #include <mach/irqs.h>
@@ -370,6 +368,11 @@ MUX_CFG(DM644X, ATAEN_DISABLE,	0,   17,    1,	  0,	 true)
 MUX_CFG(DM644X, HPIEN_DISABLE,	0,   29,    1,	  0,	 true)
 
 MUX_CFG(DM644X, AEAW,		0,   0,     31,	  31,	 true)
+MUX_CFG(DM644X, AEAW0,		0,   0,     1,	  0,	 true)
+MUX_CFG(DM644X, AEAW1,		0,   1,     1,	  0,	 true)
+MUX_CFG(DM644X, AEAW2,		0,   2,     1,	  0,	 true)
+MUX_CFG(DM644X, AEAW3,		0,   3,     1,	  0,	 true)
+MUX_CFG(DM644X, AEAW4,		0,   4,     1,	  0,	 true)
 
 MUX_CFG(DM644X, MSTK,		1,   9,     1,	  0,	 false)
 
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 0976049c7b3b..829a44bcf799 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -8,7 +8,6 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
@@ -18,7 +17,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/dm646x.h>
-#include <mach/clock.h>
 #include <mach/cputype.h>
 #include <mach/edma.h>
 #include <mach/irqs.h>
@@ -789,7 +787,14 @@ static struct davinci_id dm646x_ids[] = {
 		.part_no	= 0xb770,
 		.manufacturer	= 0x017,
 		.cpu_id		= DAVINCI_CPU_ID_DM6467,
-		.name		= "dm6467",
+		.name		= "dm6467_rev1.x",
+	},
+	{
+		.variant	= 0x1,
+		.part_no	= 0xb770,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6467,
+		.name		= "dm6467_rev3.x",
 	},
 };
 
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index f2e57d272958..648fbb760ae1 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -18,22 +18,13 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/kernel.h>
-#include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/compiler.h>
 #include <linux/io.h>
 
-#include <mach/cputype.h>
-#include <mach/memory.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 #include <mach/edma.h>
-#include <mach/mux.h>
-
 
 /* Offsets matching "struct edmacc_param" */
 #define PARM_OPT		0x00
@@ -509,43 +500,59 @@ static irqreturn_t dma_tc1err_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int reserve_contiguous_params(int ctlr, unsigned int id,
-				     unsigned int num_params,
-				     unsigned int start_param)
+static int reserve_contiguous_slots(int ctlr, unsigned int id,
+				     unsigned int num_slots,
+				     unsigned int start_slot)
 {
 	int i, j;
-	unsigned int count = num_params;
+	unsigned int count = num_slots;
+	int stop_slot = start_slot;
+	DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
 
-	for (i = start_param; i < edma_info[ctlr]->num_slots; ++i) {
+	for (i = start_slot; i < edma_info[ctlr]->num_slots; ++i) {
 		j = EDMA_CHAN_SLOT(i);
-		if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse))
+		if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse)) {
+			/* Record our current beginning slot */
+			if (count == num_slots)
+				stop_slot = i;
+
 			count--;
+			set_bit(j, tmp_inuse);
+
 			if (count == 0)
 				break;
-		else if (id == EDMA_CONT_PARAMS_FIXED_EXACT)
-			break;
-		else
-			count = num_params;
+		} else {
+			clear_bit(j, tmp_inuse);
+
+			if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
+				stop_slot = i;
+				break;
+			} else
+				count = num_slots;
+		}
 	}
 
 	/*
 	 * We have to clear any bits that we set
-	 * if we run out parameter RAMs, i.e we do find a set
-	 * of contiguous parameter RAMs but do not find the exact number
-	 * requested as we may reach the total number of parameter RAMs
+	 * if we run out parameter RAM slots, i.e we do find a set
+	 * of contiguous parameter RAM slots but do not find the exact number
+	 * requested as we may reach the total number of parameter RAM slots
 	 */
-	if (count) {
-		for (j = i - num_params + count + 1; j <= i ; ++j)
+	if (i == edma_info[ctlr]->num_slots)
+		stop_slot = i;
+
+	for (j = start_slot; j < stop_slot; j++)
+		if (test_bit(j, tmp_inuse))
 			clear_bit(j, edma_info[ctlr]->edma_inuse);
 
+	if (count)
 		return -EBUSY;
-	}
 
-	for (j = i - num_params + 1; j <= i; ++j)
+	for (j = i - num_slots + 1; j <= i; ++j)
 		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
 			&dummy_paramset, PARM_SIZE);
 
-	return EDMA_CTLR_CHAN(ctlr, i - num_params + 1);
+	return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
 }
 
 /*-----------------------------------------------------------------------*/
@@ -743,26 +750,27 @@ EXPORT_SYMBOL(edma_free_slot);
 /**
  * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
  * The API will return the starting point of a set of
- * contiguous PARAM's that have been requested
+ * contiguous parameter RAM slots that have been requested
  *
  * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
  * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- * @count: number of contiguous Paramter RAM's
- * @param  - the start value of Parameter RAM that should be passed if id
+ * @count: number of contiguous Paramter RAM slots
+ * @slot  - the start value of Parameter RAM slot that should be passed if id
  * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
  *
  * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
- * contiguous Parameter RAMs from parameter RAM 64 in the case of DaVinci SOCs
- * and 32 in the case of Primus
+ * contiguous Parameter RAM slots from parameter RAM 64 in the case of
+ * DaVinci SOCs and 32 in the case of DA8xx SOCs.
  *
  * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
- * set of contiguous parameter RAMs from the "param" that is passed as an
+ * set of contiguous parameter RAM slots from the "slot" that is passed as an
  * argument to the API.
  *
  * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
- * starts looking for a set of contiguous parameter RAMs from the "param"
+ * starts looking for a set of contiguous parameter RAMs from the "slot"
  * that is passed as an argument to the API. On failure the API will try to
- * find a set of contiguous Parameter RAMs in the remaining Parameter RAMs
+ * find a set of contiguous Parameter RAM slots from the remaining Parameter
+ * RAM slots
  */
 int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
 {
@@ -771,12 +779,13 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
 	 * the number of channels and lesser than the total number
 	 * of slots
 	 */
-	if (slot < edma_info[ctlr]->num_channels ||
-		slot >= edma_info[ctlr]->num_slots)
+	if ((id != EDMA_CONT_PARAMS_ANY) &&
+		(slot < edma_info[ctlr]->num_channels ||
+		slot >= edma_info[ctlr]->num_slots))
 		return -EINVAL;
 
 	/*
-	 * The number of parameter RAMs requested cannot be less than 1
+	 * The number of parameter RAM slots requested cannot be less than 1
 	 * and cannot be more than the number of slots minus the number of
 	 * channels
 	 */
@@ -786,11 +795,11 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
 
 	switch (id) {
 	case EDMA_CONT_PARAMS_ANY:
-		return reserve_contiguous_params(ctlr, id, count,
+		return reserve_contiguous_slots(ctlr, id, count,
 						 edma_info[ctlr]->num_channels);
 	case EDMA_CONT_PARAMS_FIXED_EXACT:
 	case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
-		return reserve_contiguous_params(ctlr, id, count, slot);
+		return reserve_contiguous_slots(ctlr, id, count, slot);
 	default:
 		return -EINVAL;
 	}
@@ -799,21 +808,21 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
 EXPORT_SYMBOL(edma_alloc_cont_slots);
 
 /**
- * edma_free_cont_slots - deallocate DMA parameter RAMs
- * @slot: first parameter RAM of a set of parameter RAMs to be freed
- * @count: the number of contiguous parameter RAMs to be freed
+ * edma_free_cont_slots - deallocate DMA parameter RAM slots
+ * @slot: first parameter RAM of a set of parameter RAM slots to be freed
+ * @count: the number of contiguous parameter RAM slots to be freed
  *
  * This deallocates the parameter RAM slots allocated by
  * edma_alloc_cont_slots.
  * Callers/applications need to keep track of sets of contiguous
- * parameter RAMs that have been allocated using the edma_alloc_cont_slots
+ * parameter RAM slots that have been allocated using the edma_alloc_cont_slots
  * API.
  * Callers are responsible for ensuring the slots are inactive, and will
  * not be activated.
  */
 int edma_free_cont_slots(unsigned slot, int count)
 {
-	unsigned ctlr;
+	unsigned ctlr, slot_to_free;
 	int i;
 
 	ctlr = EDMA_CTLR(slot);
@@ -826,11 +835,11 @@ int edma_free_cont_slots(unsigned slot, int count)
 
 	for (i = slot; i < slot + count; ++i) {
 		ctlr = EDMA_CTLR(i);
-		slot = EDMA_CHAN_SLOT(i);
+		slot_to_free = EDMA_CHAN_SLOT(i);
 
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
+		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
 			&dummy_paramset, PARM_SIZE);
-		clear_bit(slot, edma_info[ctlr]->edma_inuse);
+		clear_bit(slot_to_free, edma_info[ctlr]->edma_inuse);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index f6ea9db11f41..744755b53236 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -12,23 +12,14 @@
 
 #include <linux/errno.h>
 #include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
 
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
 #include <mach/gpio.h>
 
 #include <asm/mach/irq.h>
 
-
 static DEFINE_SPINLOCK(gpio_lock);
 
 struct davinci_gpio {
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index 18e4ce34ece6..834725f1e81d 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -11,6 +11,9 @@
 #define DAVINCI_ASP0_BASE	0x01E02000
 #define DAVINCI_ASP1_BASE	0x01E04000
 
+/* Bases of dm365 register banks */
+#define DAVINCI_DM365_ASP0_BASE	0x01D02000
+
 /* Bases of dm646x register banks */
 #define	DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
 #define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
@@ -51,6 +54,14 @@ struct snd_platform_data {
 	u32 rx_dma_offset;
 	enum dma_event_q eventq_no;	/* event queue number */
 	unsigned int codec_fmt;
+	/*
+	 * Allowing this is more efficient and eliminates left and right swaps
+	 * caused by underruns, but will swap the left and right channels
+	 * when compared to previous behavior.
+	 */
+	unsigned enable_channel_combine:1;
+	unsigned sram_size_playback;
+	unsigned sram_size_capture;
 
 	/* McASP specific fields */
 	int tdm_slots;
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 1fd3917cae4e..6ca2c9a0a482 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -20,12 +20,6 @@ extern void davinci_irq_init(void);
 extern void __iomem *davinci_intc_base;
 extern int davinci_intc_type;
 
-/* parameters describe VBUS sourcing for host mode */
-extern void setup_usb(unsigned mA, unsigned potpgt_msec);
-
-/* parameters describe VBUS sourcing for host mode */
-extern void setup_usb(unsigned mA, unsigned potpgt_msec);
-
 struct davinci_timer_instance {
 	void __iomem	*base;
 	u32		bottom_irq;
diff --git a/arch/arm/mach-davinci/include/mach/cpufreq.h b/arch/arm/mach-davinci/include/mach/cpufreq.h
new file mode 100644
index 000000000000..3c089cfb6cd6
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cpufreq.h
@@ -0,0 +1,26 @@
+/*
+ * TI DaVinci CPUFreq platform support.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef _MACH_DAVINCI_CPUFREQ_H
+#define _MACH_DAVINCI_CPUFREQ_H
+
+#include <linux/cpufreq.h>
+
+struct davinci_cpufreq_config {
+	struct cpufreq_frequency_table *freq_table;
+	int (*set_voltage) (unsigned int index);
+	int (*init) (void);
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/cpuidle.h b/arch/arm/mach-davinci/include/mach/cpuidle.h
new file mode 100644
index 000000000000..cbfc6a9c81b4
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cpuidle.h
@@ -0,0 +1,17 @@
+/*
+ * TI DaVinci cpuidle platform support
+ *
+ * 2009 (C) Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef _MACH_DAVINCI_CPUIDLE_H
+#define _MACH_DAVINCI_CPUIDLE_H
+
+struct davinci_cpuidle_config {
+	u32 ddr2_pdown;
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index d4095d0572c6..90704910d343 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -11,12 +11,17 @@
 #ifndef __ASM_ARCH_DAVINCI_DA8XX_H
 #define __ASM_ARCH_DAVINCI_DA8XX_H
 
+#include <video/da8xx-fb.h>
+
 #include <mach/serial.h>
 #include <mach/edma.h>
 #include <mach/i2c.h>
 #include <mach/emac.h>
 #include <mach/asp.h>
 #include <mach/mmc.h>
+#include <mach/usb.h>
+
+extern void __iomem *da8xx_syscfg_base;
 
 /*
  * The cp_intc interrupt controller for the da8xx isn't in the same
@@ -29,11 +34,15 @@
 #define DA8XX_CP_INTC_SIZE	SZ_8K
 #define DA8XX_CP_INTC_VIRT	(IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
 
-#define DA8XX_BOOT_CFG_BASE	(IO_PHYS + 0x14000)
+#define DA8XX_SYSCFG_BASE	(IO_PHYS + 0x14000)
+#define DA8XX_SYSCFG_VIRT(x)	(da8xx_syscfg_base + (x))
+#define DA8XX_JTAG_ID_REG	0x18
+#define DA8XX_CFGCHIP0_REG	0x17c
+#define DA8XX_CFGCHIP2_REG	0x184
+#define DA8XX_CFGCHIP3_REG	0x188
 
 #define DA8XX_PSC0_BASE		0x01c10000
 #define DA8XX_PLL0_BASE		0x01c11000
-#define DA8XX_JTAG_ID_REG	0x01c14018
 #define DA8XX_TIMER64P0_BASE	0x01c20000
 #define DA8XX_TIMER64P1_BASE	0x01c21000
 #define DA8XX_GPIO_BASE		0x01e26000
@@ -43,6 +52,7 @@
 #define DA8XX_AEMIF_CS2_BASE	0x60000000
 #define DA8XX_AEMIF_CS3_BASE	0x62000000
 #define DA8XX_AEMIF_CTL_BASE	0x68000000
+#define DA8XX_DDR2_CTL_BASE	0xb0000000
 
 #define PINMUX0			0x00
 #define PINMUX1			0x04
@@ -71,13 +81,20 @@ void __init da850_init(void);
 int da8xx_register_edma(void);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
 int da8xx_register_watchdog(void);
+int da8xx_register_usb20(unsigned mA, unsigned potpgt);
+int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
 int da8xx_register_emac(void);
-int da8xx_register_lcdc(void);
+int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
 int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
-void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata);
+void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
+int da8xx_register_rtc(void);
+int da850_register_cpufreq(void);
+int da8xx_register_cpuidle(void);
 
 extern struct platform_device da8xx_serial_device;
 extern struct emac_platform_data da8xx_emac_pdata;
+extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
+extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
 
 extern const short da830_emif25_pins[];
 extern const short da830_spi0_pins[];
@@ -110,6 +127,7 @@ extern const short da850_uart2_pins[];
 extern const short da850_i2c0_pins[];
 extern const short da850_i2c1_pins[];
 extern const short da850_cpgmac_pins[];
+extern const short da850_rmii_pins[];
 extern const short da850_mcasp_pins[];
 extern const short da850_lcdcntl_pins[];
 extern const short da850_mmcsd0_pins[];
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
index 09db4343bb4c..f1710a30e7ba 100644
--- a/arch/arm/mach-davinci/include/mach/dm365.h
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -16,6 +16,8 @@
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
 #include <mach/emac.h>
+#include <mach/asp.h>
+#include <mach/keyscan.h>
 
 #define DM365_EMAC_BASE			(0x01D07000)
 #define DM365_EMAC_CNTRL_OFFSET		(0x0000)
@@ -24,6 +26,14 @@
 #define DM365_EMAC_MDIO_OFFSET		(0x4000)
 #define DM365_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
+/* Base of key scan register bank */
+#define DM365_KEYSCAN_BASE		(0x01C69400)
+
+#define DM365_RTC_BASE			(0x01C69000)
+
 void __init dm365_init(void);
+void __init dm365_init_asp(struct snd_platform_data *pdata);
+void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
+void __init dm365_init_rtc(void);
 
 #endif /* __ASM_ARCH_DM365_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 0efb73852c2c..44e8f0fae9ea 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -22,7 +22,6 @@
 #ifndef __ASM_ARCH_DM644X_H
 #define __ASM_ARCH_DM644X_H
 
-#include <linux/platform_device.h>
 #include <mach/hardware.h>
 #include <mach/emac.h>
 #include <mach/asp.h>
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 3c918a772619..354af71798dc 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -217,6 +217,7 @@
 #define IRQ_DM365_SDIOINT0	23
 #define IRQ_DM365_MMCINT1	27
 #define IRQ_DM365_PWMINT3	28
+#define IRQ_DM365_RTCINT	29
 #define IRQ_DM365_SDIOINT1	31
 #define IRQ_DM365_SPIINT0_0	42
 #define IRQ_DM365_SPIINT3_0	43
diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h
new file mode 100644
index 000000000000..b4e21a2976d1
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/keyscan.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef DAVINCI_KEYSCAN_H
+#define DAVINCI_KEYSCAN_H
+
+#include <linux/io.h>
+
+enum davinci_matrix_types {
+	DAVINCI_KEYSCAN_MATRIX_4X4,
+	DAVINCI_KEYSCAN_MATRIX_5X3,
+};
+
+struct davinci_ks_platform_data {
+	unsigned short	*keymap;
+	u32		keymapsize;
+	u8		rep:1;
+	u8		strobe;
+	u8		interval;
+	u8		matrix_type;
+};
+
+#endif
+
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index bb84893a4e83..b60c693985ff 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -40,6 +40,11 @@ enum davinci_dm644x_index {
 
 	/* AEAW functions */
 	DM644X_AEAW,
+	DM644X_AEAW0,
+	DM644X_AEAW1,
+	DM644X_AEAW2,
+	DM644X_AEAW3,
+	DM644X_AEAW4,
 
 	/* Memory Stick */
 	DM644X_MSTK,
@@ -237,8 +242,8 @@ enum davinci_dm365_index {
 	DM365_EMAC_MDIO,
 	DM365_EMAC_MDCLK,
 
-	/* Keypad */
-	DM365_KEYPAD,
+	/* Key Scan */
+	DM365_KEYSCAN,
 
 	/* PWM */
 	DM365_PWM0,
@@ -774,6 +779,14 @@ enum davinci_da850_index {
 	DA850_MII_RXD_0,
 	DA850_MDIO_CLK,
 	DA850_MDIO_D,
+	DA850_RMII_TXD_0,
+	DA850_RMII_TXD_1,
+	DA850_RMII_TXEN,
+	DA850_RMII_CRS_DV,
+	DA850_RMII_RXD_0,
+	DA850_RMII_RXD_1,
+	DA850_RMII_RXER,
+	DA850_RMII_MHZ_50_CLK,
 
 	/* McASP function */
 	DA850_ACLKR,
@@ -881,8 +894,9 @@ enum davinci_da850_index {
 	DA850_NEMA_CS_2,
 
 	/* GPIO function */
+	DA850_GPIO2_6,
+	DA850_GPIO2_8,
 	DA850_GPIO2_15,
-	DA850_GPIO8_10,
 	DA850_GPIO4_0,
 	DA850_GPIO4_1,
 };
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index 8e4f10fe1263..5a7d7581b8ce 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -11,9 +11,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <linux/io.h>
-#include <mach/hardware.h>
-
 extern void davinci_watchdog_reset(void);
 
 static inline void arch_idle(void)
diff --git a/arch/arm/mach-davinci/include/mach/usb.h b/arch/arm/mach-davinci/include/mach/usb.h
new file mode 100644
index 000000000000..e0bc4abe69c2
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/usb.h
@@ -0,0 +1,59 @@
+/*
+ * USB related definitions
+ *
+ * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_USB_H
+#define __ASM_ARCH_USB_H
+
+/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
+#define CFGCHIP2_PHYCLKGD	(1 << 17)
+#define CFGCHIP2_VBUSSENSE	(1 << 16)
+#define CFGCHIP2_RESET		(1 << 15)
+#define CFGCHIP2_OTGMODE	(3 << 13)
+#define CFGCHIP2_NO_OVERRIDE	(0 << 13)
+#define CFGCHIP2_FORCE_HOST	(1 << 13)
+#define CFGCHIP2_FORCE_DEVICE 	(2 << 13)
+#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
+#define CFGCHIP2_USB1PHYCLKMUX	(1 << 12)
+#define CFGCHIP2_USB2PHYCLKMUX	(1 << 11)
+#define CFGCHIP2_PHYPWRDN	(1 << 10)
+#define CFGCHIP2_OTGPWRDN	(1 << 9)
+#define CFGCHIP2_DATPOL 	(1 << 8)
+#define CFGCHIP2_USB1SUSPENDM	(1 << 7)
+#define CFGCHIP2_PHY_PLLON	(1 << 6)	/* override PLL suspend */
+#define CFGCHIP2_SESENDEN	(1 << 5)	/* Vsess_end comparator */
+#define CFGCHIP2_VBDTCTEN	(1 << 4)	/* Vbus comparator */
+#define CFGCHIP2_REFFREQ	(0xf << 0)
+#define CFGCHIP2_REFFREQ_12MHZ	(1 << 0)
+#define CFGCHIP2_REFFREQ_24MHZ	(2 << 0)
+#define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
+
+struct	da8xx_ohci_root_hub;
+
+typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
+				     unsigned port);
+
+/* Passed as the platform data to the OHCI driver */
+struct	da8xx_ohci_root_hub {
+	/* Switch the port power on/off */
+	int	(*set_power)(unsigned port, int on);
+	/* Read the port power status */
+	int	(*get_power)(unsigned port);
+	/* Read the port over-current indicator */
+	int	(*get_oci)(unsigned port);
+	/* Over-current indicator change notification (pass NULL to disable) */
+	int	(*ocic_notify)(da8xx_ocic_handler_t handler);
+
+	/* Time from power on to power good (in 2 ms units) */
+	u8	potpgt;
+};
+
+void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
+
+#endif	/* ifndef __ASM_ARCH_USB_H */
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 898905e48946..f757e83415f3 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -19,7 +19,6 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 
-#include <mach/hardware.h>
 #include <mach/mux.h>
 #include <mach/common.h>
 
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index a78b657e916e..04a3cb72c5ab 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -19,14 +19,11 @@
  *
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/io.h>
 
 #include <mach/cputype.h>
-#include <mach/hardware.h>
 #include <mach/psc.h>
-#include <mach/mux.h>
 
 /* PSC register offsets */
 #define EPCPR		0x070
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index c530c7333d0a..7ce5ba086575 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -28,14 +28,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/irq.h>
-#include <mach/hardware.h>
 #include <mach/serial.h>
-#include <mach/irqs.h>
 #include <mach/cputype.h>
-#include <mach/common.h>
-
-#include "clock.h"
 
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
 					   int offset)
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
index 4f1fc9b318b3..db0f7787faf1 100644
--- a/arch/arm/mach-davinci/sram.c
+++ b/arch/arm/mach-davinci/sram.c
@@ -9,15 +9,12 @@
  * (at your option) any later version.
  */
 #include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/genalloc.h>
 
 #include <mach/common.h>
-#include <mach/memory.h>
 #include <mach/sram.h>
 
-
 static struct gen_pool *sram_pool;
 
 void *sram_alloc(size_t len, dma_addr_t *dma)
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 0d1b6d407b46..42d985beece5 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -14,20 +14,14 @@
 #include <linux/interrupt.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
-#include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/err.h>
-#include <linux/device.h>
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/errno.h>
-#include <mach/io.h>
 #include <mach/cputype.h>
 #include <mach/time.h>
 #include "clock.h"
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 06f55931620c..31f0cbea0caa 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -1,21 +1,21 @@
 /*
  * USB
  */
-#include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
 #include <linux/usb/musb.h>
-#include <linux/usb/otg.h>
 
 #include <mach/common.h>
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
+#include <mach/usb.h>
 
-#define DAVINCI_USB_OTG_BASE 0x01C64000
+#define DAVINCI_USB_OTG_BASE	0x01c64000
+
+#define DA8XX_USB0_BASE 	0x01e00000
+#define DA8XX_USB1_BASE 	0x01e25000
 
 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 static struct musb_hdrc_eps_bits musb_eps[] = {
@@ -85,10 +85,10 @@ static struct platform_device usb_dev = {
 	.num_resources  = ARRAY_SIZE(usb_resources),
 };
 
-void __init setup_usb(unsigned mA, unsigned potpgt_msec)
+void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
 {
-	usb_data.power = mA / 2;
-	usb_data.potpgt = potpgt_msec / 2;
+	usb_data.power = mA > 510 ? 255 : mA / 2;
+	usb_data.potpgt = (potpgt_ms + 1) / 2;
 
 	if (cpu_is_davinci_dm646x()) {
 		/* Override the defaults as DM6467 uses different IRQs. */
@@ -100,11 +100,77 @@ void __init setup_usb(unsigned mA, unsigned potpgt_msec)
 	platform_device_register(&usb_dev);
 }
 
+#ifdef CONFIG_ARCH_DAVINCI_DA8XX
+static struct resource da8xx_usb20_resources[] = {
+	{
+		.start		= DA8XX_USB0_BASE,
+		.end		= DA8XX_USB0_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IRQ_DA8XX_USB_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
+{
+	usb_data.clock  = "usb20";
+	usb_data.power	= mA > 510 ? 255 : mA / 2;
+	usb_data.potpgt = (potpgt + 1) / 2;
+
+	usb_dev.resource = da8xx_usb20_resources;
+	usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources);
+
+	return platform_device_register(&usb_dev);
+}
+#endif	/* CONFIG_DAVINCI_DA8XX */
+
 #else
 
-void __init setup_usb(unsigned mA, unsigned potpgt_msec)
+void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
 {
 }
 
+#ifdef CONFIG_ARCH_DAVINCI_DA8XX
+int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
+{
+	return 0;
+}
+#endif
+
 #endif  /* CONFIG_USB_MUSB_HDRC */
 
+#ifdef	CONFIG_ARCH_DAVINCI_DA8XX
+static struct resource da8xx_usb11_resources[] = {
+	[0] = {
+		.start	= DA8XX_USB1_BASE,
+		.end	= DA8XX_USB1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_DA8XX_IRQN,
+		.end	= IRQ_DA8XX_IRQN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device da8xx_usb11_device = {
+	.name		= "ohci",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &da8xx_usb11_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(da8xx_usb11_resources),
+	.resource	= da8xx_usb11_resources,
+};
+
+int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
+{
+	da8xx_usb11_device.dev.platform_data = pdata;
+	return platform_device_register(&da8xx_usb11_device);
+}
+#endif	/* CONFIG_DAVINCI_DA8XX */
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
new file mode 100644
index 000000000000..3b9a32ace909
--- /dev/null
+++ b/arch/arm/mach-dove/Kconfig
@@ -0,0 +1,14 @@
+if ARCH_DOVE
+
+menu "Marvell Dove Implementations"
+
+config MACH_DOVE_DB
+	bool "Marvell DB-MV88AP510 Development Board"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell DB-MV88AP510 Development Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
new file mode 100644
index 000000000000..7ab3be53f642
--- /dev/null
+++ b/arch/arm/mach-dove/Makefile
@@ -0,0 +1,3 @@
+obj-y				+= common.o addr-map.o irq.o pcie.o
+
+obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-dove/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c
new file mode 100644
index 000000000000..00be4fc26dd7
--- /dev/null
+++ b/arch/arm/mach-dove/addr-map.c
@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-dove/addr-map.c
+ *
+ * Address map functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR		0x0
+#define TARGET_BOOTROM		0x1
+#define TARGET_CESA		0x3
+#define TARGET_PCIE0		0x4
+#define TARGET_PCIE1		0x8
+#define TARGET_SCRATCHPAD	0xd
+
+#define ATTR_CESA		0x01
+#define ATTR_BOOTROM		0xfd
+#define ATTR_DEV_SPI0_ROM	0xfe
+#define ATTR_DEV_SPI1_ROM	0xfb
+#define ATTR_PCIE_IO		0xe0
+#define ATTR_PCIE_MEM		0xe8
+#define ATTR_SCRATCHPAD		0x0
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_CTRL(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
+#define WIN_BASE(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
+#define WIN_REMAP_LO(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
+#define WIN_REMAP_HI(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
+
+struct mbus_dram_target_info dove_mbus_dram_info;
+
+static inline void __iomem *ddr_map_sc(int i)
+{
+	return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
+}
+
+static int cpu_win_can_remap(int win)
+{
+	if (win < 4)
+		return 1;
+
+	return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+				 u8 target, u8 attr, int remap)
+{
+	u32 ctrl;
+
+	base &= 0xffff0000;
+	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+	writel(base, WIN_BASE(win));
+	writel(ctrl, WIN_CTRL(win));
+	if (cpu_win_can_remap(win)) {
+		if (remap < 0)
+			remap = base;
+		writel(remap & 0xffff0000, WIN_REMAP_LO(win));
+		writel(0, WIN_REMAP_HI(win));
+	}
+}
+
+void __init dove_setup_cpu_mbus(void)
+{
+	int i;
+	int cs;
+
+	/*
+	 * First, disable and clear windows.
+	 */
+	for (i = 0; i < 8; i++) {
+		writel(0, WIN_BASE(i));
+		writel(0, WIN_CTRL(i));
+		if (cpu_win_can_remap(i)) {
+			writel(0, WIN_REMAP_LO(i));
+			writel(0, WIN_REMAP_HI(i));
+		}
+	}
+
+	/*
+	 * Setup windows for PCIe IO+MEM space.
+	 */
+	setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
+		      TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
+	setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
+		      TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
+	setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
+		      TARGET_PCIE0, ATTR_PCIE_MEM, -1);
+	setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
+		      TARGET_PCIE1, ATTR_PCIE_MEM, -1);
+
+	/*
+	 * Setup window for CESA engine.
+	 */
+	setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
+		      TARGET_CESA, ATTR_CESA, -1);
+
+	/*
+	 * Setup the Window to the BootROM for Standby and Sleep Resume
+	 */
+	setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
+		      TARGET_BOOTROM, ATTR_BOOTROM, -1);
+
+	/*
+	 * Setup the Window to the PMU Scratch Pad space
+	 */
+	setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
+		      TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+	for (i = 0, cs = 0; i < 2; i++) {
+		u32 map = readl(ddr_map_sc(i));
+
+		/*
+		 * Chip select enabled?
+		 */
+		if (map & 1) {
+			struct mbus_dram_window *w;
+
+			w = &dove_mbus_dram_info.cs[cs++];
+			w->cs_index = i;
+			w->mbus_attr = 0; /* CS address decoding done inside */
+					  /* the DDR controller, no need to  */
+					  /* provide attributes */
+			w->base = map & 0xff800000;
+			w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
+		}
+	}
+	dove_mbus_dram_info.num_cs = cs;
+}
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
new file mode 100644
index 000000000000..806972a68c87
--- /dev/null
+++ b/arch/arm/mach-dove/common.c
@@ -0,0 +1,781 @@
+/*
+ * arch/arm/mach-dove/common.c
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/gpio.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/timex.h>
+#include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/pci.h>
+#include <mach/dove.h>
+#include <mach/bridge-regs.h>
+#include <asm/mach/arch.h>
+#include <linux/irq.h>
+#include <plat/mv_xor.h>
+#include <plat/ehci-orion.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc dove_io_desc[] __initdata = {
+	{
+		.virtual	= DOVE_SB_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
+		.length		= DOVE_SB_REGS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_NB_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
+		.length		= DOVE_NB_REGS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_PCIE0_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
+		.length		= DOVE_PCIE0_IO_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_PCIE1_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
+		.length		= DOVE_PCIE1_IO_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init dove_map_io(void)
+{
+	iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
+}
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data dove_ehci_data = {
+	.dram		= &dove_mbus_dram_info,
+	.phy_version	= EHCI_PHY_NA,
+};
+
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource dove_ehci0_resources[] = {
+	{
+		.start	= DOVE_USB0_PHYS_BASE,
+		.end	= DOVE_USB0_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_USB0,
+		.end	= IRQ_DOVE_USB0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ehci0 = {
+	.name		= "orion-ehci",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &dove_ehci_data,
+	},
+	.resource	= dove_ehci0_resources,
+	.num_resources	= ARRAY_SIZE(dove_ehci0_resources),
+};
+
+void __init dove_ehci0_init(void)
+{
+	platform_device_register(&dove_ehci0);
+}
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource dove_ehci1_resources[] = {
+	{
+		.start	= DOVE_USB1_PHYS_BASE,
+		.end	= DOVE_USB1_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_USB1,
+		.end	= IRQ_DOVE_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ehci1 = {
+	.name		= "orion-ehci",
+	.id		= 1,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &dove_ehci_data,
+	},
+	.resource	= dove_ehci1_resources,
+	.num_resources	= ARRAY_SIZE(dove_ehci1_resources),
+};
+
+void __init dove_ehci1_init(void)
+{
+	platform_device_register(&dove_ehci1);
+}
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data dove_ge00_shared_data = {
+	.t_clk		= 0,
+	.dram		= &dove_mbus_dram_info,
+};
+
+static struct resource dove_ge00_shared_resources[] = {
+	{
+		.name	= "ge00 base",
+		.start	= DOVE_GE00_PHYS_BASE + 0x2000,
+		.end	= DOVE_GE00_PHYS_BASE + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_ge00_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &dove_ge00_shared_data,
+	},
+	.num_resources	= 1,
+	.resource	= dove_ge00_shared_resources,
+};
+
+static struct resource dove_ge00_resources[] = {
+	{
+		.name	= "ge00 irq",
+		.start	= IRQ_DOVE_GE00_SUM,
+		.end	= IRQ_DOVE_GE00_SUM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ge00 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= dove_ge00_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &dove_ge00_shared;
+	dove_ge00.dev.platform_data = eth_data;
+
+	platform_device_register(&dove_ge00_shared);
+	platform_device_register(&dove_ge00);
+}
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static struct resource dove_rtc_resource[] = {
+	{
+		.start	= DOVE_RTC_PHYS_BASE,
+		.end	= DOVE_RTC_PHYS_BASE + 32 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_RTC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+void __init dove_rtc_init(void)
+{
+	platform_device_register_simple("rtc-mv", -1, dove_rtc_resource, 2);
+}
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource dove_sata_resources[] = {
+	{
+		.name	= "sata base",
+		.start	= DOVE_SATA_PHYS_BASE,
+		.end	= DOVE_SATA_PHYS_BASE + 0x5000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "sata irq",
+		.start	= IRQ_DOVE_SATA,
+		.end	= IRQ_DOVE_SATA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_sata = {
+	.name		= "sata_mv",
+	.id		= 0,
+	.dev		= {
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(dove_sata_resources),
+	.resource	= dove_sata_resources,
+};
+
+void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
+{
+	sata_data->dram = &dove_mbus_dram_info;
+	dove_sata.dev.platform_data = sata_data;
+	platform_device_register(&dove_sata);
+}
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart0_data[] = {
+	{
+		.mapbase	= DOVE_UART0_PHYS_BASE,
+		.membase	= (char *)DOVE_UART0_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_0,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart0_resources[] = {
+	{
+		.start		= DOVE_UART0_PHYS_BASE,
+		.end		= DOVE_UART0_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_0,
+		.end		= IRQ_DOVE_UART_0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart0 = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= dove_uart0_data,
+	},
+	.resource		= dove_uart0_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart0_resources),
+};
+
+void __init dove_uart0_init(void)
+{
+	platform_device_register(&dove_uart0);
+}
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart1_data[] = {
+	{
+		.mapbase	= DOVE_UART1_PHYS_BASE,
+		.membase	= (char *)DOVE_UART1_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_1,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart1_resources[] = {
+	{
+		.start		= DOVE_UART1_PHYS_BASE,
+		.end		= DOVE_UART1_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_1,
+		.end		= IRQ_DOVE_UART_1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart1 = {
+	.name			= "serial8250",
+	.id			= 1,
+	.dev			= {
+		.platform_data	= dove_uart1_data,
+	},
+	.resource		= dove_uart1_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart1_resources),
+};
+
+void __init dove_uart1_init(void)
+{
+	platform_device_register(&dove_uart1);
+}
+
+/*****************************************************************************
+ * UART2
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart2_data[] = {
+	{
+		.mapbase	= DOVE_UART2_PHYS_BASE,
+		.membase	= (char *)DOVE_UART2_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_2,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart2_resources[] = {
+	{
+		.start		= DOVE_UART2_PHYS_BASE,
+		.end		= DOVE_UART2_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_2,
+		.end		= IRQ_DOVE_UART_2,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart2 = {
+	.name			= "serial8250",
+	.id			= 2,
+	.dev			= {
+		.platform_data	= dove_uart2_data,
+	},
+	.resource		= dove_uart2_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart2_resources),
+};
+
+void __init dove_uart2_init(void)
+{
+	platform_device_register(&dove_uart2);
+}
+
+/*****************************************************************************
+ * UART3
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart3_data[] = {
+	{
+		.mapbase	= DOVE_UART3_PHYS_BASE,
+		.membase	= (char *)DOVE_UART3_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_3,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart3_resources[] = {
+	{
+		.start		= DOVE_UART3_PHYS_BASE,
+		.end		= DOVE_UART3_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_3,
+		.end		= IRQ_DOVE_UART_3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart3 = {
+	.name			= "serial8250",
+	.id			= 3,
+	.dev			= {
+		.platform_data	= dove_uart3_data,
+	},
+	.resource		= dove_uart3_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart3_resources),
+};
+
+void __init dove_uart3_init(void)
+{
+	platform_device_register(&dove_uart3);
+}
+
+/*****************************************************************************
+ * SPI0
+ ****************************************************************************/
+static struct orion_spi_info dove_spi0_data = {
+	.tclk		= 0,
+};
+
+static struct resource dove_spi0_resources[] = {
+	{
+		.start	= DOVE_SPI0_PHYS_BASE,
+		.end	= DOVE_SPI0_PHYS_BASE + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SPI0,
+		.end	= IRQ_DOVE_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_spi0 = {
+	.name		= "orion_spi",
+	.id		= 0,
+	.resource	= dove_spi0_resources,
+	.dev		= {
+		.platform_data	= &dove_spi0_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_spi0_resources),
+};
+
+void __init dove_spi0_init(void)
+{
+	platform_device_register(&dove_spi0);
+}
+
+/*****************************************************************************
+ * SPI1
+ ****************************************************************************/
+static struct orion_spi_info dove_spi1_data = {
+	.tclk		= 0,
+};
+
+static struct resource dove_spi1_resources[] = {
+	{
+		.start	= DOVE_SPI1_PHYS_BASE,
+		.end	= DOVE_SPI1_PHYS_BASE + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SPI1,
+		.end	= IRQ_DOVE_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_spi1 = {
+	.name		= "orion_spi",
+	.id		= 1,
+	.resource	= dove_spi1_resources,
+	.dev		= {
+		.platform_data	= &dove_spi1_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_spi1_resources),
+};
+
+void __init dove_spi1_init(void)
+{
+	platform_device_register(&dove_spi1);
+}
+
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+static struct mv64xxx_i2c_pdata dove_i2c_data = {
+	.freq_m		= 10, /* assumes 166 MHz TCLK gets 94.3kHz */
+	.freq_n		= 3,
+	.timeout	= 1000, /* Default timeout of 1 second */
+};
+
+static struct resource dove_i2c_resources[] = {
+	{
+		.name	= "i2c base",
+		.start	= DOVE_I2C_PHYS_BASE,
+		.end	= DOVE_I2C_PHYS_BASE + 0x20 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "i2c irq",
+		.start	= IRQ_DOVE_I2C,
+		.end	= IRQ_DOVE_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_i2c = {
+	.name		= MV64XXX_I2C_CTLR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dove_i2c_resources),
+	.resource	= dove_i2c_resources,
+	.dev		= {
+		.platform_data = &dove_i2c_data,
+	},
+};
+
+void __init dove_i2c_init(void)
+{
+	platform_device_register(&dove_i2c);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static int get_tclk(void)
+{
+	/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
+	return 166666667;
+}
+
+static void dove_timer_init(void)
+{
+	orion_time_init(IRQ_DOVE_BRIDGE, get_tclk());
+}
+
+struct sys_timer dove_timer = {
+	.init = dove_timer_init,
+};
+
+/*****************************************************************************
+ * XOR
+ ****************************************************************************/
+static struct mv_xor_platform_shared_data dove_xor_shared_data = {
+	.dram		= &dove_mbus_dram_info,
+};
+
+/*****************************************************************************
+ * XOR 0
+ ****************************************************************************/
+static u64 dove_xor0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor0_shared_resources[] = {
+	{
+		.name	= "xor 0 low",
+		.start	= DOVE_XOR0_PHYS_BASE,
+		.end	= DOVE_XOR0_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 0 high",
+		.start	= DOVE_XOR0_HIGH_PHYS_BASE,
+		.end	= DOVE_XOR0_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_xor0_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data = &dove_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_xor0_shared_resources),
+	.resource	= dove_xor0_shared_resources,
+};
+
+static struct resource dove_xor00_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_00,
+		.end	= IRQ_DOVE_XOR_00,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor00_data = {
+	.shared		= &dove_xor0_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor00_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dove_xor00_resources),
+	.resource	= dove_xor00_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor00_data,
+	},
+};
+
+static struct resource dove_xor01_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_01,
+		.end	= IRQ_DOVE_XOR_01,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor01_data = {
+	.shared		= &dove_xor0_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor01_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(dove_xor01_resources),
+	.resource	= dove_xor01_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor01_data,
+	},
+};
+
+void __init dove_xor0_init(void)
+{
+	platform_device_register(&dove_xor0_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, dove_xor00_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor00_data.cap_mask);
+	platform_device_register(&dove_xor00_channel);
+
+	dma_cap_set(DMA_MEMCPY, dove_xor01_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, dove_xor01_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor01_data.cap_mask);
+	platform_device_register(&dove_xor01_channel);
+}
+
+/*****************************************************************************
+ * XOR 1
+ ****************************************************************************/
+static u64 dove_xor1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor1_shared_resources[] = {
+	{
+		.name	= "xor 0 low",
+		.start	= DOVE_XOR1_PHYS_BASE,
+		.end	= DOVE_XOR1_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 0 high",
+		.start	= DOVE_XOR1_HIGH_PHYS_BASE,
+		.end	= DOVE_XOR1_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_xor1_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 1,
+	.dev		= {
+		.platform_data = &dove_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_xor1_shared_resources),
+	.resource	= dove_xor1_shared_resources,
+};
+
+static struct resource dove_xor10_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_10,
+		.end	= IRQ_DOVE_XOR_10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor10_data = {
+	.shared		= &dove_xor1_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor10_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(dove_xor10_resources),
+	.resource	= dove_xor10_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor10_data,
+	},
+};
+
+static struct resource dove_xor11_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_11,
+		.end	= IRQ_DOVE_XOR_11,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor11_data = {
+	.shared		= &dove_xor1_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor11_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(dove_xor11_resources),
+	.resource	= dove_xor11_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor11_data,
+	},
+};
+
+void __init dove_xor1_init(void)
+{
+	platform_device_register(&dove_xor1_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, dove_xor10_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor10_data.cap_mask);
+	platform_device_register(&dove_xor10_channel);
+
+	dma_cap_set(DMA_MEMCPY, dove_xor11_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, dove_xor11_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor11_data.cap_mask);
+	platform_device_register(&dove_xor11_channel);
+}
+
+void __init dove_init(void)
+{
+	int tclk;
+
+	tclk = get_tclk();
+
+	printk(KERN_INFO "Dove 88AP510 SoC, ");
+	printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+
+#ifdef CONFIG_CACHE_TAUROS2
+	tauros2_init();
+#endif
+	dove_setup_cpu_mbus();
+
+	dove_ge00_shared_data.t_clk = tclk;
+	dove_uart0_data[0].uartclk = tclk;
+	dove_uart1_data[0].uartclk = tclk;
+	dove_uart2_data[0].uartclk = tclk;
+	dove_uart3_data[0].uartclk = tclk;
+	dove_spi0_data.tclk = tclk;
+	dove_spi1_data.tclk = tclk;
+
+	/* internal devices that every board has */
+	dove_rtc_init();
+	dove_xor0_init();
+	dove_xor1_init();
+}
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
new file mode 100644
index 000000000000..b29e8937de4f
--- /dev/null
+++ b/arch/arm/mach-dove/common.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-dove/common.h
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_DOVE_COMMON_H
+#define __ARCH_DOVE_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+extern struct sys_timer dove_timer;
+extern struct mbus_dram_target_info dove_mbus_dram_info;
+
+/*
+ * Basic Dove init functions used early by machine-setup.
+ */
+void dove_map_io(void);
+void dove_init(void);
+void dove_init_irq(void);
+void dove_setup_cpu_mbus(void);
+void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void dove_sata_init(struct mv_sata_platform_data *sata_data);
+void dove_pcie_init(int init_port0, int init_port1);
+void dove_ehci0_init(void);
+void dove_ehci1_init(void);
+void dove_uart0_init(void);
+void dove_uart1_init(void);
+void dove_uart2_init(void);
+void dove_uart3_init(void);
+void dove_spi0_init(void);
+void dove_spi1_init(void);
+void dove_i2c_init(void);
+
+#endif
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
new file mode 100644
index 000000000000..f2971b745224
--- /dev/null
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -0,0 +1,102 @@
+/*
+ * arch/arm/mach-dove/dove-db-setup.c
+ *
+ * Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/spi/flash.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/dove.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data dove_db_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data dove_db_sata_data = {
+	.n_ports        = 1,
+};
+
+/*****************************************************************************
+ * SPI Devices:
+ * 	SPI0: 4M Flash ST-M25P32-VMF6P
+ ****************************************************************************/
+static const struct flash_platform_data dove_db_spi_flash_data = {
+	.type		= "m25p64",
+};
+
+static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
+	{
+		.modalias       = "m25p80",
+		.platform_data  = &dove_db_spi_flash_data,
+		.irq            = -1,
+		.max_speed_hz   = 20000000,
+		.bus_num        = 0,
+		.chip_select    = 0,
+	},
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+static int __init dove_db_pci_init(void)
+{
+	if (machine_is_dove_db())
+		dove_pcie_init(1, 1);
+
+	return 0;
+}
+
+subsys_initcall(dove_db_pci_init);
+
+/*****************************************************************************
+ * Board Init
+ ****************************************************************************/
+static void __init dove_db_init(void)
+{
+	/*
+	 * Basic Dove setup. Needs to be called early.
+	 */
+	dove_init();
+
+	dove_ge00_init(&dove_db_ge00_data);
+	dove_ehci0_init();
+	dove_ehci1_init();
+	dove_sata_init(&dove_db_sata_data);
+	dove_spi0_init();
+	dove_spi1_init();
+	dove_uart0_init();
+	dove_uart1_init();
+	dove_i2c_init();
+	spi_register_board_info(dove_db_spi_flash_info,
+				ARRAY_SIZE(dove_db_spi_flash_info));
+}
+
+MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
+	.phys_io	= DOVE_SB_REGS_PHYS_BASE,
+	.io_pg_offst	= ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= dove_db_init,
+	.map_io		= dove_map_io,
+	.init_irq	= dove_init_irq,
+	.timer		= &dove_timer,
+MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
new file mode 100644
index 000000000000..214a4c31f069
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-dove/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/dove.h>
+
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0000)
+
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define  CPU_CTRL_PCIE0_LINK	0x00000001
+#define  CPU_RESET		0x00000002
+#define  CPU_CTRL_PCIE1_LINK	0x00000008
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define  SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define  SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define  BRIDGE_INT_TIMER0	0x0002
+#define  BRIDGE_INT_TIMER1	0x0004
+#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF	0x0000
+#define IRQ_MASK_LOW_OFF	0x0004
+#define FIQ_MASK_LOW_OFF	0x0008
+#define ENDPOINT_MASK_LOW_OFF	0x000c
+#define IRQ_CAUSE_HIGH_OFF	0x0010
+#define IRQ_MASK_HIGH_OFF	0x0014
+#define FIQ_MASK_HIGH_OFF	0x0018
+#define ENDPOINT_MASK_HIGH_OFF	0x001c
+#define PCIE_INTERRUPT_MASK_OFF	0x0020
+
+#define IRQ_MASK_LOW		(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)
+#define FIQ_MASK_LOW		(IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF)
+#define ENDPOINT_MASK_LOW	(IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF)
+#define IRQ_MASK_HIGH		(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)
+#define FIQ_MASK_HIGH		(IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF)
+#define ENDPOINT_MASK_HIGH	(IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
+#define PCIE_INTERRUPT_MASK	(IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
+
+#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE | 0x011c)
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
new file mode 100644
index 000000000000..9b89ec7d3040
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/bridge-regs.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =DOVE_SB_REGS_PHYS_BASE
+	ldrne	\rx, =DOVE_SB_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
new file mode 100644
index 000000000000..f6a08397f046
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-dove/include/mach/dove.h
+ *
+ * Generic definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_DOVE_H
+#define __ASM_ARCH_DOVE_H
+
+#include <mach/vmalloc.h>
+
+/*
+ * Marvell Dove address maps.
+ *
+ * phys		virt		size
+ * c8000000	fdb00000	1M	Cryptographic SRAM
+ * e0000000	@runtime	128M	PCIe-0 Memory space
+ * e8000000	@runtime	128M	PCIe-1 Memory space
+ * f1000000	fde00000	8M	on-chip south-bridge registers
+ * f1800000	fe600000	8M	on-chip north-bridge registers
+ * f2000000	fee00000	1M	PCIe-0 I/O space
+ * f2100000	fef00000	1M	PCIe-1 I/O space
+ */
+
+#define DOVE_CESA_PHYS_BASE		0xc8000000
+#define DOVE_CESA_VIRT_BASE		0xfdb00000
+#define DOVE_CESA_SIZE			SZ_1M
+
+#define DOVE_PCIE0_MEM_PHYS_BASE	0xe0000000
+#define DOVE_PCIE0_MEM_SIZE		SZ_128M
+
+#define DOVE_PCIE1_MEM_PHYS_BASE	0xe8000000
+#define DOVE_PCIE1_MEM_SIZE		SZ_128M
+
+#define DOVE_BOOTROM_PHYS_BASE		0xf8000000
+#define DOVE_BOOTROM_SIZE		SZ_128M
+
+#define DOVE_SCRATCHPAD_PHYS_BASE	0xf0000000
+#define DOVE_SCRATCHPAD_VIRT_BASE	0xfdd00000
+#define DOVE_SCRATCHPAD_SIZE		SZ_1M
+
+#define DOVE_SB_REGS_PHYS_BASE		0xf1000000
+#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
+#define DOVE_SB_REGS_SIZE		SZ_8M
+
+#define DOVE_NB_REGS_PHYS_BASE		0xf1800000
+#define DOVE_NB_REGS_VIRT_BASE		0xfe600000
+#define DOVE_NB_REGS_SIZE		SZ_8M
+
+#define DOVE_PCIE0_IO_PHYS_BASE		0xf2000000
+#define DOVE_PCIE0_IO_VIRT_BASE		0xfee00000
+#define DOVE_PCIE0_IO_BUS_BASE		0x00000000
+#define DOVE_PCIE0_IO_SIZE		SZ_1M
+
+#define DOVE_PCIE1_IO_PHYS_BASE		0xf2100000
+#define DOVE_PCIE1_IO_VIRT_BASE		0xfef00000
+#define DOVE_PCIE1_IO_BUS_BASE		0x00100000
+#define DOVE_PCIE1_IO_SIZE		SZ_1M
+
+/*
+ * Dove Core Registers Map
+ */
+
+/* SPI, I2C, UART */
+#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x11000)
+#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12000)
+#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12000)
+#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12100)
+#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12100)
+#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12200)
+#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12200)
+#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12300)
+#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12300)
+#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x10600)
+#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x14600)
+
+/* North-South Bridge */
+#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x20000)
+
+/* Cryptographic Engine */
+#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x30000)
+
+/* PCIe 0 */
+#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x40000)
+
+/* USB */
+#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x50000)
+#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x51000)
+
+/* XOR 0 Engine */
+#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60800)
+#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+
+/* XOR 1 Engine */
+#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60900)
+#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+
+/* Gigabit Ethernet */
+#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x70000)
+
+/* PCIe 1 */
+#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x80000)
+
+/* CAFE */
+#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x92000)
+#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x90000)
+#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x98000)
+
+/* SATA */
+#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+
+/* I2S/SPDIF */
+#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb0000)
+#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+
+/* NAND Flash Controller */
+#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+
+/* MPP, GPIO, Reset Sampling */
+#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
+#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE | 0x014)
+#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE | 0x018)
+#define DOVE_GPIO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
+#define  DOVE_NAND_GPIO_EN		(1 << 0)
+#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_VIRT_BASE + 0x40)
+
+
+/* Power Management */
+#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+
+/* Real Time Clock */
+#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+
+/* AC97 */
+#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe0000)
+#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+
+/* Peripheral DMA */
+#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe4000)
+#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+
+#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define  DOVE_TWSI_ENABLE_OPTION1	(1 << 7)
+#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define  DOVE_TWSI_ENABLE_OPTION2	(1 << 20)
+#define  DOVE_TWSI_ENABLE_OPTION3	(1 << 21)
+#define  DOVE_TWSI_OPTION3_GPIO		(1 << 22)
+#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define  DOVE_SSP_ON_AU1		(1 << 0)
+#define  DOVE_SSP_CLOCK_ENABLE		(1 << 1)
+#define  DOVE_SSP_BPB_CLOCK_SRC_SSP	(1 << 11)
+/* Memory Controller */
+#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE | 0x00000)
+
+/* LCD Controller */
+#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x20000)
+#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x30000)
+
+/* Graphic Engine */
+#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x40000)
+
+/* Video Engine */
+#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x400000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
new file mode 100644
index 000000000000..e84c78c2a8b7
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-dove/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Dove platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/bridge-regs.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+
+	@ if no low interrupts set, check high interrupts
+	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	moveq	\irqnr, #63
+	andeqs	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h
new file mode 100644
index 000000000000..0ee70ff39e11
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/gpio.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-dove/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+#define GPIO_MAX	64
+
+#define GPIO_BASE_LO		(DOVE_GPIO_VIRT_BASE + 0x00)
+#define GPIO_BASE_HI		(DOVE_GPIO_VIRT_BASE + 0x20)
+
+#define GPIO_BASE(pin)		((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
+
+#define GPIO_OUT(pin)		(GPIO_BASE(pin) + 0x00)
+#define GPIO_IO_CONF(pin)	(GPIO_BASE(pin) + 0x04)
+#define GPIO_BLINK_EN(pin)	(GPIO_BASE(pin) + 0x08)
+#define GPIO_IN_POL(pin)	(GPIO_BASE(pin) + 0x0c)
+#define GPIO_DATA_IN(pin)	(GPIO_BASE(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin)	(GPIO_BASE(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin)	(GPIO_BASE(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin)	(GPIO_BASE(pin) + 0x1c)
+
+static inline int gpio_to_irq(int pin)
+{
+	if (pin < NR_GPIO_IRQS)
+		return pin + IRQ_DOVE_GPIO_START;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+	if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS)
+		return irq - IRQ_DOVE_GPIO_START;
+
+	return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/hardware.h b/arch/arm/mach-dove/include/mach/hardware.h
new file mode 100644
index 000000000000..32b0826e7873
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/hardware.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-dove/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "dove.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO			0x1000
+#define PCIBIOS_MIN_MEM			0x01000000
+#define PCIMEM_BASE			DOVE_PCIE0_MEM_PHYS_BASE
+
+
+/* Macros below are required for compatibility with PXA AC'97 driver.	*/
+#define __REG(x)	(*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
+				DOVE_SB_REGS_VIRT_BASE)))
+#define __PREG(x)	(((u32)&(x)) - DOVE_SB_REGS_VIRT_BASE + \
+		DOVE_SB_REGS_PHYS_BASE)
+#endif
diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h
new file mode 100644
index 000000000000..3b3e4721ce2e
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "dove.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(a)  ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
+				   DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h
new file mode 100644
index 000000000000..46681466f92b
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/irqs.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-dove/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * Dove Low Interrupt Controller
+ */
+#define IRQ_DOVE_BRIDGE		0
+#define IRQ_DOVE_H2C		1
+#define IRQ_DOVE_C2H		2
+#define IRQ_DOVE_NAND		3
+#define IRQ_DOVE_PDMA		4
+#define IRQ_DOVE_SPI1		5
+#define IRQ_DOVE_SPI0		6
+#define IRQ_DOVE_UART_0		7
+#define IRQ_DOVE_UART_1		8
+#define IRQ_DOVE_UART_2		9
+#define IRQ_DOVE_UART_3		10
+#define IRQ_DOVE_I2C		11
+#define IRQ_DOVE_GPIO_0_7	12
+#define IRQ_DOVE_GPIO_8_15	13
+#define IRQ_DOVE_GPIO_16_23	14
+#define IRQ_DOVE_PCIE0_ERR	15
+#define IRQ_DOVE_PCIE0		16
+#define IRQ_DOVE_PCIE1_ERR	17
+#define IRQ_DOVE_PCIE1		18
+#define IRQ_DOVE_I2S0		19
+#define IRQ_DOVE_I2S0_ERR	20
+#define IRQ_DOVE_I2S1		21
+#define IRQ_DOVE_I2S1_ERR	22
+#define IRQ_DOVE_USB_ERR	23
+#define IRQ_DOVE_USB0		24
+#define IRQ_DOVE_USB1		25
+#define IRQ_DOVE_GE00_RX	26
+#define IRQ_DOVE_GE00_TX	27
+#define IRQ_DOVE_GE00_MISC	28
+#define IRQ_DOVE_GE00_SUM	29
+#define IRQ_DOVE_GE00_ERR	30
+#define IRQ_DOVE_CRYPTO		31
+
+/*
+ * Dove High Interrupt Controller
+ */
+#define IRQ_DOVE_AC97		32
+#define IRQ_DOVE_PMU		33
+#define IRQ_DOVE_CAM		34
+#define IRQ_DOVE_SDIO0		35
+#define IRQ_DOVE_SDIO1		36
+#define IRQ_DOVE_SDIO0_WAKEUP	37
+#define IRQ_DOVE_SDIO1_WAKEUP	38
+#define IRQ_DOVE_XOR_00		39
+#define IRQ_DOVE_XOR_01		40
+#define IRQ_DOVE_XOR0_ERR	41
+#define IRQ_DOVE_XOR_10		42
+#define IRQ_DOVE_XOR_11		43
+#define IRQ_DOVE_XOR1_ERR	44
+#define IRQ_DOVE_LCD_DCON	45
+#define IRQ_DOVE_LCD1		46
+#define IRQ_DOVE_LCD0		47
+#define IRQ_DOVE_GPU		48
+#define IRQ_DOVE_PERFORM_MNTR	49
+#define IRQ_DOVE_VPRO_DMA1	51
+#define IRQ_DOVE_SSP_TIMER	54
+#define IRQ_DOVE_SSP		55
+#define IRQ_DOVE_MC_L2_ERR	56
+#define IRQ_DOVE_CRYPTO_ERR	59
+#define IRQ_DOVE_GPIO_24_31	60
+#define IRQ_DOVE_HIGH_GPIO	61
+#define IRQ_DOVE_SATA		62
+
+/*
+ * DOVE General Purpose Pins
+ */
+#define IRQ_DOVE_GPIO_START	64
+#define NR_GPIO_IRQS		64
+
+/*
+ * PMU interrupts
+ */
+#define IRQ_DOVE_PMU_START	(IRQ_DOVE_GPIO_START + NR_GPIO_IRQS)
+#define NR_PMU_IRQS		7
+#define IRQ_DOVE_RTC		(IRQ_DOVE_PMU_START + 5)
+
+#define NR_IRQS			(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
+
+/* Required for compatability with PXA AC97 driver.	*/
+#define IRQ_AC97		IRQ_DOVE_AC97
+/* Required for compatability with PXA DMA driver.	*/
+#define IRQ_DMA			IRQ_DOVE_PDMA
+/* Required for compatability with PXA NAND driver 	*/
+#define IRQ_NAND		IRQ_DOVE_NAND
+#endif
diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h
new file mode 100644
index 000000000000..d66872074946
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/memory.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-dove/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h
new file mode 100644
index 000000000000..3ad9f946a9e8
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/pm.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-dove/include/mach/pm.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_PM_H
+#define __ASM_ARCH_PM_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+
+#define CLOCK_GATING_CONTROL	(DOVE_PMU_VIRT_BASE + 0x38)
+#define  CLOCK_GATING_USB0_MASK		(1 << 0)
+#define  CLOCK_GATING_USB1_MASK		(1 << 1)
+#define  CLOCK_GATING_GBE_MASK		(1 << 2)
+#define  CLOCK_GATING_SATA_MASK		(1 << 3)
+#define  CLOCK_GATING_PCIE0_MASK	(1 << 4)
+#define  CLOCK_GATING_PCIE1_MASK	(1 << 5)
+#define  CLOCK_GATING_SDIO0_MASK	(1 << 8)
+#define  CLOCK_GATING_SDIO1_MASK	(1 << 9)
+#define  CLOCK_GATING_NAND_MASK		(1 << 10)
+#define  CLOCK_GATING_CAMERA_MASK	(1 << 11)
+#define  CLOCK_GATING_I2S0_MASK		(1 << 12)
+#define  CLOCK_GATING_I2S1_MASK		(1 << 13)
+#define  CLOCK_GATING_CRYPTO_MASK	(1 << 15)
+#define  CLOCK_GATING_AC97_MASK		(1 << 21)
+#define  CLOCK_GATING_PDMA_MASK		(1 << 22)
+#define  CLOCK_GATING_XOR0_MASK		(1 << 23)
+#define  CLOCK_GATING_XOR1_MASK		(1 << 24)
+#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << 30)
+
+#define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
+#define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)
+
+static inline int pmu_to_irq(int pin)
+{
+	if (pin < NR_PMU_IRQS)
+		return pin + IRQ_DOVE_PMU_START;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_pmu(int irq)
+{
+	if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+		return irq - IRQ_DOVE_PMU_START;
+
+	return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
new file mode 100644
index 000000000000..356afda56853
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/system.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-dove/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/bridge-regs.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h
new file mode 100644
index 000000000000..251d538541db
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-dove/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h
new file mode 100644
index 000000000000..2c5cdd7a3eed
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-dove/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/dove.h>
+
+#define UART_THR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x0))
+#define UART_LSR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x14))
+
+#define LSR_THRE	0x20
+
+static void putc(const char c)
+{
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		/* Transmit fifo not full? */
+		if (*UART_LSR & LSR_THRE)
+			break;
+	}
+
+	*UART_THR = c;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h
new file mode 100644
index 000000000000..8b2c974755c6
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-dove/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfd800000
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
new file mode 100644
index 000000000000..61bfcb3b08c2
--- /dev/null
+++ b/arch/arm/mach-dove/irq.c
@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-dove/irq.c
+ *
+ * Dove IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <plat/irq.h>
+#include <asm/mach/irq.h>
+#include <mach/pm.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int irqoff;
+	BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO);
+
+	irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 :
+		3 + irq - IRQ_DOVE_GPIO_24_31;
+
+	orion_gpio_irq_handler(irqoff << 3);
+	if (irq == IRQ_DOVE_HIGH_GPIO) {
+		orion_gpio_irq_handler(40);
+		orion_gpio_irq_handler(48);
+		orion_gpio_irq_handler(56);
+	}
+}
+
+static void pmu_irq_mask(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = readl(PMU_INTERRUPT_MASK);
+	u &= ~(1 << (pin & 31));
+	writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_unmask(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = readl(PMU_INTERRUPT_MASK);
+	u |= 1 << (pin & 31);
+	writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_ack(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = ~(1 << (pin & 31));
+	writel(u, PMU_INTERRUPT_CAUSE);
+}
+
+static struct irq_chip pmu_irq_chip = {
+	.name		= "pmu_irq",
+	.mask		= pmu_irq_mask,
+	.unmask		= pmu_irq_unmask,
+	.ack		= pmu_irq_ack,
+};
+
+static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
+
+	cause &= readl(PMU_INTERRUPT_MASK);
+	if (cause == 0) {
+		do_bad_IRQ(irq, desc);
+		return;
+	}
+
+	for (irq = 0; irq < NR_PMU_IRQS; irq++) {
+		if (!(cause & (1 << irq)))
+			continue;
+		irq = pmu_to_irq(irq);
+		desc = irq_desc + irq;
+		desc_handle_irq(irq, desc);
+	}
+}
+
+void __init dove_init_irq(void)
+{
+	int i;
+
+	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+
+	/*
+	 * Mask and clear GPIO IRQ interrupts.
+	 */
+	writel(0, GPIO_LEVEL_MASK(0));
+	writel(0, GPIO_EDGE_MASK(0));
+	writel(0, GPIO_EDGE_CAUSE(0));
+
+	/*
+	 * Mask and clear PMU interrupts
+	 */
+	writel(0, PMU_INTERRUPT_MASK);
+	writel(0, PMU_INTERRUPT_CAUSE);
+
+	for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) {
+		set_irq_chip(i, &orion_gpio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		irq_desc[i].status |= IRQ_LEVEL;
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
+
+	for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
+		set_irq_chip(i, &pmu_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		irq_desc[i].status |= IRQ_LEVEL;
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
+}
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
new file mode 100644
index 000000000000..502d1ca2f4b7
--- /dev/null
+++ b/arch/arm/mach-dove/pcie.c
@@ -0,0 +1,238 @@
+/*
+ * arch/arm/mach-dove/pcie.c
+ *
+ * PCIe functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include <asm/delay.h>
+#include <plat/pcie.h>
+#include <mach/irqs.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+struct pcie_port {
+	u8			index;
+	u8			root_bus_nr;
+	void __iomem		*base;
+	spinlock_t		conf_lock;
+	char			io_space_name[16];
+	char			mem_space_name[16];
+	struct resource		res[2];
+};
+
+static struct pcie_port pcie_port[2];
+static int num_pcie_ports;
+
+
+static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct pcie_port *pp;
+
+	if (nr >= num_pcie_ports)
+		return 0;
+
+	pp = &pcie_port[nr];
+	pp->root_bus_nr = sys->busnr;
+
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+
+	orion_pcie_setup(pp->base, &dove_mbus_dram_info);
+
+	/*
+	 * IORESOURCE_IO
+	 */
+	snprintf(pp->io_space_name, sizeof(pp->io_space_name),
+		 "PCIe %d I/O", pp->index);
+	pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
+	pp->res[0].name = pp->io_space_name;
+	if (pp->index == 0) {
+		pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
+		pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
+	} else {
+		pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
+		pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
+	}
+	pp->res[0].flags = IORESOURCE_IO;
+	if (request_resource(&ioport_resource, &pp->res[0]))
+		panic("Request PCIe IO resource failed\n");
+	sys->resource[0] = &pp->res[0];
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+		 "PCIe %d MEM", pp->index);
+	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+	pp->res[1].name = pp->mem_space_name;
+	if (pp->index == 0) {
+		pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
+		pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
+	} else {
+		pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
+		pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
+	}
+	pp->res[1].flags = IORESOURCE_MEM;
+	if (request_resource(&iomem_resource, &pp->res[1]))
+		panic("Request PCIe Memory resource failed\n");
+	sys->resource[1] = &pp->res[1];
+
+	sys->resource[2] = NULL;
+
+	return 1;
+}
+
+static struct pcie_port *bus_to_port(int bus)
+{
+	int i;
+
+	for (i = num_pcie_ports - 1; i >= 0; i--) {
+		int rbus = pcie_port[i].root_bus_nr;
+		if (rbus != -1 && rbus <= bus)
+			break;
+	}
+
+	return i >= 0 ? pcie_port + i : NULL;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+	/*
+	 * Don't go out when trying to access nonexisting devices
+	 * on the local bus.
+	 */
+	if (bus == pp->root_bus_nr && dev > 1)
+		return 0;
+
+	return 1;
+}
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			int size, u32 *val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			int where, int size, u32 val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static struct pci_ops pcie_ops = {
+	.read = pcie_rd_conf,
+	.write = pcie_wr_conf,
+};
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+	/*
+	 * Prevent enumeration of root complex.
+	 */
+	if (dev->bus->parent == NULL && dev->devfn == 0) {
+		int i;
+
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end   = 0;
+			dev->resource[i].flags = 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	struct pci_bus *bus;
+
+	if (nr < num_pcie_ports) {
+		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+	} else {
+		bus = NULL;
+		BUG();
+	}
+
+	return bus;
+}
+
+static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct pcie_port *pp = bus_to_port(dev->bus->number);
+
+	return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
+}
+
+static struct hw_pci dove_pci __initdata = {
+	.nr_controllers	= 2,
+	.swizzle	= pci_std_swizzle,
+	.setup		= dove_pcie_setup,
+	.scan		= dove_pcie_scan_bus,
+	.map_irq	= dove_pcie_map_irq,
+};
+
+static void __init add_pcie_port(int index, unsigned long base)
+{
+	printk(KERN_INFO "Dove PCIe port %d: ", index);
+
+	if (orion_pcie_link_up((void __iomem *)base)) {
+		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+
+		printk(KERN_INFO "link up\n");
+
+		pp->index = index;
+		pp->root_bus_nr = -1;
+		pp->base = (void __iomem *)base;
+		spin_lock_init(&pp->conf_lock);
+		memset(pp->res, 0, sizeof(pp->res));
+	} else {
+		printk(KERN_INFO "link down, ignoring\n");
+	}
+}
+
+void __init dove_pcie_init(int init_port0, int init_port1)
+{
+	if (init_port0)
+		add_pcie_port(0, DOVE_PCIE0_VIRT_BASE);
+
+	if (init_port1)
+		add_pcie_port(1, DOVE_PCIE1_VIRT_BASE);
+
+	pci_common_init(&dove_pci);
+}
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b4357c388d2e..1f0d66561bbe 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -31,6 +31,7 @@
 
 #include <mach/hardware.h>
 #include <mach/fb.h>
+#include <mach/ep93xx_keypad.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -728,6 +729,82 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 	platform_device_register(&ep93xx_fb_device);
 }
 
+
+/*************************************************************************
+ * EP93xx matrix keypad peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_keypad_resource[] = {
+	{
+		.start	= EP93XX_KEY_MATRIX_PHYS_BASE,
+		.end	= EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_EP93XX_KEY,
+		.end	= IRQ_EP93XX_KEY,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ep93xx_keypad_device = {
+	.name			= "ep93xx-keypad",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(ep93xx_keypad_resource),
+	.resource		= ep93xx_keypad_resource,
+};
+
+void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
+{
+	ep93xx_keypad_device.dev.platform_data = data;
+	platform_device_register(&ep93xx_keypad_device);
+}
+
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
+{
+	int err;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
+		if (err)
+			goto fail_gpio_c;
+		err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
+		if (err)
+			goto fail_gpio_d;
+	}
+
+	/* Enable the keypad controller; GPIO ports C and D used for keypad */
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+				 EP93XX_SYSCON_DEVCFG_GONK);
+
+	return 0;
+
+fail_gpio_d:
+	gpio_free(EP93XX_GPIO_LINE_C(i));
+fail_gpio_c:
+	for ( ; i >= 0; --i) {
+		gpio_free(EP93XX_GPIO_LINE_C(i));
+		gpio_free(EP93XX_GPIO_LINE_D(i));
+	}
+	return err;
+}
+EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
+
+void ep93xx_keypad_release_gpio(struct platform_device *pdev)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		gpio_free(EP93XX_GPIO_LINE_C(i));
+		gpio_free(EP93XX_GPIO_LINE_D(i));
+	}
+
+	/* Disable the keypad controller; GPIO ports C and D used for GPIO */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+			       EP93XX_SYSCON_DEVCFG_GONK);
+}
+EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
+
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/include/mach/clkdev.h b/arch/arm/mach-ep93xx/include/mach/clkdev.h
index 04b37a89801c..50cb991eadeb 100644
--- a/arch/arm/mach-ep93xx/include/mach/clkdev.h
+++ b/arch/arm/mach-ep93xx/include/mach/clkdev.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/clkdev.h
+ */
+
 #ifndef __ASM_MACH_CLKDEV_H
 #define __ASM_MACH_CLKDEV_H
 
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
index ef6bd9d13148..3a5961d3f3b1 100644
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/dma.h
+ */
+
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index b1f937eda29c..d55194a4c093 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -134,6 +134,7 @@
 #define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
 #define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
+#define EP93XX_KEY_MATRIX_PHYS_BASE	EP93XX_APB_PHYS(0x000f0000)
 #define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
 
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 349fa7cb72d5..5a3ce024b593 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -1,6 +1,7 @@
 /*
  * arch/arm/mach-ep93xx/include/mach/hardware.h
  */
+
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index cebcc1c53d63..594b77f21054 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,6 +1,7 @@
 /*
  * arch/arm/mach-ep93xx/include/mach/io.h
  */
+
 #ifndef __ASM_MACH_IO_H
 #define __ASM_MACH_IO_H
 
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 469fd968d517..c6dc14dbca18 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -8,6 +8,7 @@ struct i2c_gpio_platform_data;
 struct i2c_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
+struct ep93xx_keypad_platform_data;
 
 struct ep93xx_eth_data
 {
@@ -39,6 +40,9 @@ void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
 void ep93xx_pwm_release_gpio(struct platform_device *pdev);
+void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
+void ep93xx_keypad_release_gpio(struct platform_device *pdev);
 
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 42ae29b288a1..25b1da9a5035 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -64,6 +64,8 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x)
 		(dma_addr_t)page_to_phys(page);				\
 	})
 
+#define __arch_dma_to_page(dev, addr)	phys_to_page(addr)
+
 #endif /* CONFIG_ARCH_IOP13XX */
 #endif /* !ASSEMBLY */
 
diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
index d6d52527589d..f1c00d6d560b 100644
--- a/arch/arm/mach-iop13xx/include/mach/time.h
+++ b/arch/arm/mach-iop13xx/include/mach/time.h
@@ -20,7 +20,6 @@
 #define IOP13XX_CORE_FREQ_1200		(5 << 16)
 
 void iop_init_time(unsigned long tickrate);
-unsigned long iop_gettimeoffset(void);
 
 static inline unsigned long iop13xx_core_freq(void)
 {
@@ -66,6 +65,13 @@ static inline unsigned long iop13xx_xsi_bus_ratio(void)
 	return 2;
 }
 
+static inline u32 read_tmr0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c9, 0" : "=r" (val));
+	return val;
+}
+
 static inline void write_tmr0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val));
@@ -83,6 +89,11 @@ static inline u32 read_tcr0(void)
 	return val;
 }
 
+static inline void write_tcr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c2, c9, 0" : : "r" (val));
+}
+
 static inline u32 read_tcr1(void)
 {
 	u32 val;
@@ -90,6 +101,11 @@ static inline u32 read_tcr1(void)
 	return val;
 }
 
+static inline void write_tcr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c3, c9, 0" : : "r" (val));
+}
+
 static inline void write_trr0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val));
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 5051c03d437c..f91f3154577d 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -87,7 +87,6 @@ static void __init iq81340mc_timer_init(void)
 
 static struct sys_timer iq81340mc_timer = {
        .init       = iq81340mc_timer_init,
-       .offset     = iop_gettimeoffset,
 };
 
 MACHINE_START(IQ81340MC, "Intel IQ81340MC")
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index bc443073a8e3..ddb7a3435de9 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -89,7 +89,6 @@ static void __init iq81340sc_timer_init(void)
 
 static struct sys_timer iq81340sc_timer = {
        .init       = iq81340sc_timer_init,
-       .offset     = iop_gettimeoffset,
 };
 
 MACHINE_START(IQ81340SC, "Intel IQ81340SC")
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 3ad4696ade42..2bef9b6e1cc9 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -42,7 +42,6 @@ static void __init em7210_timer_init(void)
 
 static struct sys_timer em7210_timer = {
 	.init		= em7210_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 /*
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index a9c2dfdb2507..93370a46b620 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -47,7 +47,6 @@ static void __init glantank_timer_init(void)
 
 static struct sys_timer glantank_timer = {
 	.init		= glantank_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index dd1cd9904518..a7a08dda7f33 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -78,7 +78,6 @@ static void __init iq31244_timer_init(void)
 
 static struct sys_timer iq31244_timer = {
 	.init		= iq31244_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index fbe27798759d..0200f80c1e17 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -46,7 +46,6 @@ static void __init iq80321_timer_init(void)
 
 static struct sys_timer iq80321_timer = {
 	.init		= iq80321_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index d2e427899729..2a5c637639bb 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -53,7 +53,6 @@ static void __init n2100_timer_init(void)
 
 static struct sys_timer n2100_timer = {
 	.init		= n2100_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index d51e10cddf20..394e95a30b75 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -48,7 +48,6 @@ static void __init iq80331_timer_init(void)
 
 static struct sys_timer iq80331_timer = {
 	.init		= iq80331_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 92fb44cdbcad..a40badf126c2 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -48,7 +48,6 @@ static void __init iq80332_timer_init(void)
 
 static struct sys_timer iq80332_timer = {
 	.init		= iq80332_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 0aca451b216d..8bf09ae5b347 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -33,10 +33,18 @@ config MACH_SHEEVAPLUG
 	  Marvell SheevaPlug Reference Board.
 
 config MACH_TS219
-	bool "QNAP TS-119 and TS-219 Turbo NAS"
+	bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  QNAP TS-119 and TS-219 Turbo NAS devices.
+	  QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS
+	  devices.
+
+config MACH_TS41X
+	bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
+	  devices.
 
 config MACH_OPENRD_BASE
 	bool "Marvell OpenRD Base Board"
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 80ab0ec90ee1..9f2f67b2b63d 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -5,7 +5,8 @@ obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
-obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
+obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index ec1a64f263d2..2830f0fe80e0 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -1,6 +1,6 @@
 /*
  *
- * QNAP TS-119/TS-219 Turbo NAS Board Setup
+ * QNAP TS-11x/TS-21x Turbo NAS Board Setup
  *
  * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
  * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
@@ -14,87 +14,17 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/i2c.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
-#include <linux/timex.h>
-#include <linux/serial_reg.h>
-#include <linux/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include "common.h"
 #include "mpp.h"
-
-/****************************************************************************
- * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
- *     the QNAP firmware.
- * Layout as used by QNAP:
- *  0x00000000-0x00080000 : "U-Boot"
- *  0x00200000-0x00400000 : "Kernel"
- *  0x00400000-0x00d00000 : "RootFS"
- *  0x00d00000-0x01000000 : "RootFS2"
- *  0x00080000-0x000c0000 : "U-Boot Config"
- *  0x000c0000-0x00200000 : "NAS Config"
- *
- * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
- * used by the QNAP TS-109/TS-209.
- *
- ***************************************************************************/
-
-static struct mtd_partition qnap_ts219_partitions[] = {
-	{
-		.name		= "U-Boot",
-		.size		= 0x00080000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "Kernel",
-		.size		= 0x00200000,
-		.offset		= 0x00200000,
-	}, {
-		.name		= "RootFS1",
-		.size		= 0x00900000,
-		.offset		= 0x00400000,
-	}, {
-		.name		= "RootFS2",
-		.size		= 0x00300000,
-		.offset		= 0x00d00000,
-	}, {
-		.name		= "U-Boot Config",
-		.size		= 0x00040000,
-		.offset		= 0x00080000,
-	}, {
-		.name		= "NAS Config",
-		.size		= 0x00140000,
-		.offset		= 0x000c0000,
-	},
-};
-
-static const struct flash_platform_data qnap_ts219_flash = {
-	.type		= "m25p128",
-	.name		= "spi_flash",
-	.parts		= qnap_ts219_partitions,
-	.nr_parts	= ARRAY_SIZE(qnap_ts219_partitions),
-};
-
-static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &qnap_ts219_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
+#include "tsx1x-common.h"
 
 static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
@@ -152,36 +82,10 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP14_UART1_RXD,	/* PIC controller */
 	MPP15_GPIO,		/* USB Copy button */
 	MPP16_GPIO,		/* Reset button */
+	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
 	0
 };
 
-
-/*****************************************************************************
- * QNAP TS-x19 specific power off method via UART1-attached PIC
- ****************************************************************************/
-
-#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
-
-void qnap_ts219_power_off(void)
-{
-	/* 19200 baud divisor */
-	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
-
-	pr_info("%s: triggering power-off...\n", __func__);
-
-	/* hijack UART1 and reset into sane state (19200,8n1) */
-	writel(0x83, UART1_REG(LCR));
-	writel(divisor & 0xff, UART1_REG(DLL));
-	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
-	writel(0x03, UART1_REG(LCR));
-	writel(0x00, UART1_REG(IER));
-	writel(0x00, UART1_REG(FCR));
-	writel(0x00, UART1_REG(MCR));
-
-	/* send the power-off command 'A' to PIC */
-	writel('A', UART1_REG(TX));
-}
-
 static void __init qnap_ts219_init(void)
 {
 	/*
@@ -192,9 +96,7 @@ static void __init qnap_ts219_init(void)
 
 	kirkwood_uart0_init();
 	kirkwood_uart1_init(); /* A PIC controller is connected here. */
-	spi_register_board_info(qnap_ts219_spi_slave_info,
-				ARRAY_SIZE(qnap_ts219_spi_slave_info));
-	kirkwood_spi_init();
+	qnap_tsx1x_register_flash();
 	kirkwood_i2c_init();
 	i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
 	kirkwood_ge00_init(&qnap_ts219_ge00_data);
@@ -202,7 +104,7 @@ static void __init qnap_ts219_init(void)
 	kirkwood_ehci_init();
 	platform_device_register(&qnap_ts219_button_device);
 
-	pm_power_off = qnap_ts219_power_off;
+	pm_power_off = qnap_tsx1x_power_off;
 
 }
 
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
new file mode 100644
index 000000000000..de49c2d9e74b
--- /dev/null
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -0,0 +1,154 @@
+/*
+ *
+ * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx1x-common.h"
+
+static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data qnap_ts41x_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button qnap_ts41x_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 43,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 37,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data qnap_ts41x_button_data = {
+	.buttons	= qnap_ts41x_buttons,
+	.nbuttons	= ARRAY_SIZE(qnap_ts41x_buttons),
+};
+
+static struct platform_device qnap_ts41x_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts41x_button_data,
+	}
+};
+
+static unsigned int qnap_ts41x_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_PEX_RST_OUTn,
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_UART1_TXD,	/* PIC controller */
+	MPP14_UART1_RXD,	/* PIC controller */
+	MPP15_SATA0_ACTn,
+	MPP16_SATA1_ACTn,
+	MPP20_GE1_0,
+	MPP21_GE1_1,
+	MPP22_GE1_2,
+	MPP23_GE1_3,
+	MPP24_GE1_4,
+	MPP25_GE1_5,
+	MPP26_GE1_6,
+	MPP27_GE1_7,
+	MPP30_GE1_10,
+	MPP31_GE1_11,
+	MPP32_GE1_12,
+	MPP33_GE1_13,
+	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
+	MPP37_GPIO,		/* Reset button */
+	MPP43_GPIO,		/* USB Copy button */
+	MPP44_GPIO,		/* Board ID: 0: TS-419U, 1: TS-419 */
+	MPP45_GPIO,		/* JP1: 0: console, 1: LCD */
+	MPP46_GPIO,		/* External SATA HDD1 error indicator */
+	MPP47_GPIO,		/* External SATA HDD2 error indicator */
+	MPP48_GPIO,		/* External SATA HDD3 error indicator */
+	MPP49_GPIO,		/* External SATA HDD4 error indicator */
+	0
+};
+
+static void __init qnap_ts41x_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(qnap_ts41x_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_uart1_init(); /* A PIC controller is connected here. */
+	qnap_tsx1x_register_flash();
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
+	kirkwood_ge00_init(&qnap_ts41x_ge00_data);
+	kirkwood_ge01_init(&qnap_ts41x_ge01_data);
+	kirkwood_sata_init(&qnap_ts41x_sata_data);
+	kirkwood_ehci_init();
+	platform_device_register(&qnap_ts41x_button_device);
+
+	pm_power_off = qnap_tsx1x_power_off;
+
+}
+
+static int __init ts41x_pci_init(void)
+{
+	if (machine_is_ts41x())
+		kirkwood_pcie_init();
+
+   return 0;
+}
+subsys_initcall(ts41x_pci_init);
+
+MACHINE_START(TS41X, "QNAP TS-41x")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= qnap_ts41x_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
new file mode 100644
index 000000000000..7221c20b2afa
--- /dev/null
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -0,0 +1,113 @@
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+
+/*
+ * QNAP TS-x1x Boards flash
+ */
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ *     partitions on the device because we want to keep compatability with
+ *     the QNAP firmware.
+ * Layout as used by QNAP:
+ *  0x00000000-0x00080000 : "U-Boot"
+ *  0x00200000-0x00400000 : "Kernel"
+ *  0x00400000-0x00d00000 : "RootFS"
+ *  0x00d00000-0x01000000 : "RootFS2"
+ *  0x00080000-0x000c0000 : "U-Boot Config"
+ *  0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+struct mtd_partition qnap_tsx1x_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.size		= 0x00080000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.size		= 0x00200000,
+		.offset		= 0x00200000,
+	}, {
+		.name		= "RootFS1",
+		.size		= 0x00900000,
+		.offset		= 0x00400000,
+	}, {
+		.name		= "RootFS2",
+		.size		= 0x00300000,
+		.offset		= 0x00d00000,
+	}, {
+		.name		= "U-Boot Config",
+		.size		= 0x00040000,
+		.offset		= 0x00080000,
+	}, {
+		.name		= "NAS Config",
+		.size		= 0x00140000,
+		.offset		= 0x000c0000,
+	},
+};
+
+const struct flash_platform_data qnap_tsx1x_flash = {
+	.type		= "m25p128",
+	.name		= "spi_flash",
+	.parts		= qnap_tsx1x_partitions,
+	.nr_parts	= ARRAY_SIZE(qnap_tsx1x_partitions),
+};
+
+struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &qnap_tsx1x_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+void qnap_tsx1x_register_flash(void)
+{
+	spi_register_board_info(qnap_tsx1x_spi_slave_info,
+				ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
+	kirkwood_spi_init();
+}
+
+
+/*****************************************************************************
+ * QNAP TS-x1x specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx1x_power_off(void)
+{
+	/* 19200 baud divisor */
+	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack UART1 and reset into sane state (19200,8n1) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x03, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x00, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* send the power-off command 'A' to PIC */
+	writel('A', UART1_REG(TX));
+}
+
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
new file mode 100644
index 000000000000..9a592962a6ea
--- /dev/null
+++ b/arch/arm/mach-kirkwood/tsx1x-common.h
@@ -0,0 +1,7 @@
+#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
+#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
+
+extern void qnap_tsx1x_register_flash(void);
+extern void qnap_tsx1x_power_off(void);
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 76e5308685a4..ffa19aae6e05 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -41,6 +41,13 @@ extern struct bus_type platform_bus_type;
 		__dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
 	   __dma; })
 
+#define __arch_dma_to_page(dev, x)	\
+	({ dma_addr_t __dma = x;				\
+	   if (!is_lbus_device(dev))				\
+		__dma += PHYS_OFFSET - KS8695_PCIMEM_PA;	\
+	   phys_to_page(__dma);					\
+	})
+
 #endif
 
 #endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
index 48e827d2fa56..59d2ace35217 100644
--- a/arch/arm/mach-lh7a40x/include/mach/hardware.h
+++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h
@@ -31,7 +31,7 @@
 /*
  * This __REG() version gives the same results as the one above,  except
  * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers.  It's a shame that gcc
+ * assembly code for access to contiguous registers.  It's a shame that gcc
  * doesn't guess this by itself.
  */
 #include <asm/types.h>
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 4562452d4074..a2d307ec0420 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -13,6 +13,9 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -85,12 +88,48 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+static struct mtd_partition aspenite_nand_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_8M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= (SZ_2M + SZ_1M),
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_48M,
+		.mask_flags	= 0,
+	}
+};
+
+static struct pxa3xx_nand_platform_data aspenite_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= aspenite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
 	/* on-chip devices */
 	pxa168_add_uart(1);
+	pxa168_add_nand(&aspenite_nand_info);
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index 2d9cc5a7122f..2a46ed5cc2a2 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -34,6 +34,21 @@ struct clkops apbc_clk_ops = {
 	.disable	= apbc_clk_disable,
 };
 
+static void apmu_clk_enable(struct clk *clk)
+{
+	__raw_writel(clk->enable_val, clk->clk_rst);
+}
+
+static void apmu_clk_disable(struct clk *clk)
+{
+	__raw_writel(0, clk->clk_rst);
+}
+
+struct clkops apmu_clk_ops = {
+	.enable		= apmu_clk_enable,
+	.disable	= apmu_clk_disable,
+};
+
 static DEFINE_SPINLOCK(clocks_lock);
 
 int clk_enable(struct clk *clk)
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
index ed967e78e6a8..eefffbe683b0 100644
--- a/arch/arm/mach-mmp/clock.h
+++ b/arch/arm/mach-mmp/clock.h
@@ -25,6 +25,7 @@ struct clk {
 };
 
 extern struct clkops apbc_clk_ops;
+extern struct clkops apmu_clk_ops;
 
 #define APBC_CLK(_name, _reg, _fnclksel, _rate)			\
 struct clk clk_##_name = {					\
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index 16295cfd5e29..d68871b0f28c 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -31,7 +31,9 @@
 #define IRQ_PXA168_DDR_INT		26
 #define IRQ_PXA168_UART1		27
 #define IRQ_PXA168_UART2		28
+#define IRQ_PXA168_UART3		29
 #define IRQ_PXA168_WDT			35
+#define IRQ_PXA168_MAIN_PMU		36
 #define IRQ_PXA168_FRQ_CHANGE		38
 #define IRQ_PXA168_SDH1			39
 #define IRQ_PXA168_SDH2			40
@@ -46,7 +48,7 @@
 #define IRQ_PXA168_USB2			51
 #define IRQ_PXA168_AC97			57
 #define IRQ_PXA168_TWSI1		58
-#define IRQ_PXA168_PMU			60
+#define IRQ_PXA168_AP_PMU		60
 #define IRQ_PXA168_SM_INT		63
 
 /*
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 6bf1f0eefcd1..3ad612cbdf09 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -4,6 +4,7 @@
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -13,6 +14,7 @@ extern struct pxa_device_desc pxa168_device_pwm1;
 extern struct pxa_device_desc pxa168_device_pwm2;
 extern struct pxa_device_desc pxa168_device_pwm3;
 extern struct pxa_device_desc pxa168_device_pwm4;
+extern struct pxa_device_desc pxa168_device_nand;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -64,4 +66,9 @@ static inline int pxa168_add_pwm(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
+{
+	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
+}
 #endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 6ae1ed7a0a9f..4f0b4ec6f5d0 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -4,6 +4,7 @@
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
@@ -13,6 +14,7 @@ extern struct pxa_device_desc pxa910_device_pwm1;
 extern struct pxa_device_desc pxa910_device_pwm2;
 extern struct pxa_device_desc pxa910_device_pwm3;
 extern struct pxa_device_desc pxa910_device_pwm4;
+extern struct pxa_device_desc pxa910_device_nand;
 
 static inline int pxa910_add_uart(int id)
 {
@@ -64,4 +66,9 @@ static inline int pxa910_add_pwm(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info)
+{
+	return pxa_register_device(&pxa910_device_nand, info, sizeof(*info));
+}
 #endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 71b1ae338753..37dbdde17fac 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -19,6 +19,7 @@
 #include <mach/addr-map.h>
 #include <mach/cputype.h>
 #include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
 #include <mach/dma.h>
@@ -72,6 +73,8 @@ static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
 
+static APMU_CLK(nand, NAND, 0x01db, 208000000);
+
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -82,6 +85,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
 	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -127,3 +131,4 @@ PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
 PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
 PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
 PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
+PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 5882ca6b49fb..d4049508a4df 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -110,6 +110,8 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 
+static APMU_CLK(nand, NAND, 0x01db, 208000000);
+
 /* device and clock bindings */
 static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -120,6 +122,7 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
 	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 };
 
 static int __init pxa910_init(void)
@@ -174,3 +177,4 @@ PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
 PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
 PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
 PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
+PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 08cfef6c92a2..8f49b2b12608 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -11,9 +11,13 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 #include <mach/addr-map.h>
 #include <mach/mfp-pxa910.h>
 #include <mach/pxa910.h>
@@ -26,6 +30,86 @@ static unsigned long ttc_dkb_pin_config[] __initdata = {
 	/* UART2 */
 	GPIO47_UART2_RXD,
 	GPIO48_UART2_TXD,
+
+	/* DFI */
+	DF_IO0_ND_IO0,
+	DF_IO1_ND_IO1,
+	DF_IO2_ND_IO2,
+	DF_IO3_ND_IO3,
+	DF_IO4_ND_IO4,
+	DF_IO5_ND_IO5,
+	DF_IO6_ND_IO6,
+	DF_IO7_ND_IO7,
+	DF_IO8_ND_IO8,
+	DF_IO9_ND_IO9,
+	DF_IO10_ND_IO10,
+	DF_IO11_ND_IO11,
+	DF_IO12_ND_IO12,
+	DF_IO13_ND_IO13,
+	DF_IO14_ND_IO14,
+	DF_IO15_ND_IO15,
+	DF_nCS0_SM_nCS2_nCS0,
+	DF_ALE_SM_WEn_ND_ALE,
+	DF_CLE_SM_OEn_ND_CLE,
+	DF_WEn_DF_WEn,
+	DF_REn_DF_REn,
+	DF_RDY0_DF_RDY0,
+};
+
+static struct mtd_partition ttc_dkb_onenand_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_8M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= (SZ_2M + SZ_1M),
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_48M,
+		.mask_flags	= 0,
+	}
+};
+
+static struct onenand_platform_data ttc_dkb_onenand_info = {
+	.parts		= ttc_dkb_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(ttc_dkb_onenand_partitions),
+};
+
+static struct resource ttc_dkb_resource_onenand[] = {
+	[0] = {
+		.start	= SMC_CS0_PHYS_BASE,
+		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ttc_dkb_device_onenand = {
+	.name		= "onenand-flash",
+	.id		= -1,
+	.resource	= ttc_dkb_resource_onenand,
+	.num_resources	= ARRAY_SIZE(ttc_dkb_resource_onenand),
+	.dev		= {
+		.platform_data	= &ttc_dkb_onenand_info,
+	},
+};
+
+static struct platform_device *ttc_dkb_devices[] = {
+	&ttc_dkb_device_onenand,
 };
 
 static void __init ttc_dkb_init(void)
@@ -34,6 +118,9 @@ static void __init ttc_dkb_init(void)
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
+
+	/* off-chip devices */
+	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
 }
 
 MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index d140abca690a..f780086befd7 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -3,6 +3,30 @@ if ARCH_MSM
 comment "MSM Board Type"
 	depends on ARCH_MSM
 
+config MSM_DEBUG_UART
+	int
+	default 1 if MSM_DEBUG_UART1
+	default 2 if MSM_DEBUG_UART2
+	default 3 if MSM_DEBUG_UART3
+
+choice
+	prompt "Debug UART"
+
+	default MSM_DEBUG_UART_NONE
+
+	config MSM_DEBUG_UART_NONE
+		bool "None"
+
+	config MSM_DEBUG_UART1
+		bool "UART1"
+
+	config MSM_DEBUG_UART2
+		bool "UART2"
+
+	config MSM_DEBUG_UART3
+		bool "UART3"
+endchoice
+
 config MACH_HALIBUT
 	depends on ARCH_MSM
 	default y
@@ -10,4 +34,10 @@ config MACH_HALIBUT
 	help
 	  Support for the Qualcomm SURF7201A eval board.
 
+config MACH_TROUT
+	default y
+	bool "HTC Dream (aka trout)"
+	help
+	  Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
+
 endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 1aa47001aa3b..91e6f5c95dc1 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -6,3 +6,4 @@ obj-y += clock.o clock-7x01a.o
 
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o
 
+obj-$(CONFIG_MACH_TROUT) += board-dream.o
diff --git a/arch/arm/mach-msm/board-dream.c b/arch/arm/mach-msm/board-dream.c
new file mode 100644
index 000000000000..21afa8513168
--- /dev/null
+++ b/arch/arm/mach-msm/board-dream.c
@@ -0,0 +1,93 @@
+/* linux/arch/arm/mach-msm/board-dream.c
+ *
+ * Copyright (C) 2009 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+
+#include <mach/board.h>
+#include <mach/hardware.h>
+#include <mach/msm_iomap.h>
+
+#include "devices.h"
+#include "board-dream.h"
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_uart3,
+	&msm_device_smd,
+	&msm_device_nand,
+	&msm_device_hsusb,
+	&msm_device_i2c,
+};
+
+extern struct sys_timer msm_timer;
+
+static void __init trout_init_irq(void)
+{
+	msm_init_irq();
+}
+
+static void __init trout_fixup(struct machine_desc *desc, struct tag *tags,
+				char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks = 1;
+	mi->bank[0].start = PHYS_OFFSET;
+	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
+	mi->bank[0].size = (101*1024*1024);
+}
+
+static void __init trout_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static struct map_desc trout_io_desc[] __initdata = {
+	{
+		.virtual = TROUT_CPLD_BASE,
+		.pfn     = __phys_to_pfn(TROUT_CPLD_START),
+		.length  = TROUT_CPLD_SIZE,
+		.type    = MT_DEVICE_NONSHARED
+	}
+};
+
+static void __init trout_map_io(void)
+{
+	msm_map_common_io();
+	iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
+
+#ifdef CONFIG_MSM_DEBUG_UART3
+	/* route UART3 to the "H2W" extended usb connector */
+	writeb(0x80, TROUT_CPLD_BASE + 0x00);
+#endif
+
+	msm_clock_init();
+}
+
+MACHINE_START(TROUT, "HTC Dream")
+	.phys_io	= MSM_DEBUG_UART_PHYS,
+	.io_pg_offst	= ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.fixup		= trout_fixup,
+	.map_io		= trout_map_io,
+	.init_irq	= trout_init_irq,
+	.init_machine	= trout_init,
+	.timer		= &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-dream.h b/arch/arm/mach-msm/board-dream.h
new file mode 100644
index 000000000000..4f345a5a0a61
--- /dev/null
+++ b/arch/arm/mach-msm/board-dream.h
@@ -0,0 +1,5 @@
+
+#define TROUT_CPLD_BASE   0xE8100000
+#define TROUT_CPLD_START  0x98000000
+#define TROUT_CPLD_SIZE   SZ_4K
+
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 1db3c97dbc49..d48747ebcd3d 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -14,15 +14,18 @@
  *
  */
 
+
+
 #include <mach/hardware.h>
 #include <mach/msm_iomap.h>
 
+#ifdef CONFIG_MSM_DEBUG_UART
 	.macro	addruart,rx
 	@ see if the MMU is enabled and select appropriate base address
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1
-	ldreq	\rx, =MSM_UART1_PHYS
-	movne	\rx, #0
+	ldreq	\rx, =MSM_DEBUG_UART_PHYS
+	ldrne	\rx, =MSM_DEBUG_UART_BASE
 	.endm
 
 	.macro	senduart,rd,rx
@@ -32,13 +35,20 @@
 
 	.macro	waituart,rd,rx
 	@ wait for TX_READY
-	teq	\rx, #0
-	bne	2f
-1:	ldr	\rd, [\rx, #0x08]
+1001:	ldr	\rd, [\rx, #0x08]
 	tst	\rd, #0x04
-	beq	1b
-2:
+	beq	1001b
+	.endm
+#else
+	.macro	addruart,rx
+	.endm
+
+	.macro	senduart,rd,rx
+	.endm
+
+	.macro	waituart,rd,rx
 	.endm
+#endif
 
 	.macro	busyuart,rd,rx
 	.endm
diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h
new file mode 100644
index 000000000000..0ecf25426284
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/mmc.h
@@ -0,0 +1,26 @@
+/*
+ *  arch/arm/include/asm/mach/mmc.h
+ */
+#ifndef ASMARM_MACH_MMC_H
+#define ASMARM_MACH_MMC_H
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+
+struct embedded_sdio_data {
+	struct sdio_cis cis;
+	struct sdio_cccr cccr;
+	struct sdio_embedded_func *funcs;
+	int num_funcs;
+};
+
+struct mmc_platform_data {
+	unsigned int ocr_mask;			/* available voltages */
+	u32 (*translate_vdd)(struct device *, unsigned int);
+	unsigned int (*status)(struct device *);
+	struct embedded_sdio_data *embedded_sdio;
+	int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
+};
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index 2f7b4c8620d9..9dae1a98c77a 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -84,6 +84,18 @@
 #define MSM_UART3_PHYS        0xA9C00000
 #define MSM_UART3_SIZE        SZ_4K
 
+#ifdef CONFIG_MSM_DEBUG_UART
+#define MSM_DEBUG_UART_BASE   0xE1000000
+#if CONFIG_MSM_DEBUG_UART == 1
+#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 2
+#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 3
+#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
+#endif
+#define MSM_DEBUG_UART_SIZE   SZ_4K
+#endif
+
 #define MSM_SDC1_PHYS         0xA0400000
 #define MSM_SDC1_SIZE         SZ_4K
 
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
index 026e8955ace9..d94292c29d8e 100644
--- a/arch/arm/mach-msm/include/mach/uncompress.h
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -16,9 +16,16 @@
 #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
 
 #include "hardware.h"
+#include "linux/io.h"
+#include "mach/msm_iomap.h"
 
 static void putc(int c)
 {
+#if defined(MSM_DEBUG_UART_PHYS)
+	unsigned base = MSM_DEBUG_UART_PHYS;
+	while (!(readl(base + 0x08) & 0x04)) ;
+	writel(c, base + 0x0c);
+#endif
 }
 
 static inline void flush(void)
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 6e7692ff6f2c..1c5e7dac086f 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -42,6 +42,9 @@ static struct map_desc msm_io_desc[] __initdata = {
 	MSM_DEVICE(GPIO1),
 	MSM_DEVICE(GPIO2),
 	MSM_DEVICE(CLK_CTL),
+#ifdef CONFIG_MSM_DEBUG_UART
+	MSM_DEVICE(DEBUG_UART),
+#endif
 	{
 		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
 		.pfn =      __phys_to_pfn(MSM_SHARED_RAM_PHYS),
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index c8a2eac4d13c..b96c6a389363 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -6,11 +6,13 @@ choice
 
 config MACH_MX21
 	bool "i.MX21 support"
+	select ARCH_MXC_AUDMUX_V1
 	help
 	  This enables support for Freescale's MX2 based i.MX21 processor.
 
 config MACH_MX27
 	bool "i.MX27 support"
+	select ARCH_MXC_AUDMUX_V1
 	help
 	  This enables support for Freescale's MX2 based i.MX27 processor.
 
@@ -102,4 +104,11 @@ config MACH_PCA100
 	  Include support for phyCARD-s (aka pca100) platform. This
 	  includes specific configurations for the module and its peripherals.
 
+config MACH_MXT_TD60
+	bool "Maxtrack i-MXT TD60"
+	depends on MACH_MX27
+	help
+	  Include support for i-MXT (aka td60) platform. This
+	  includes specific configurations for the module and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 19560f045632..52aca0aaf9b5 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
 
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index eede79855f4a..91901b5d56c2 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -1000,7 +1000,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&per_clk[0]);
 	clk_enable(&gpio_clk);
 
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	clk_enable(&uart_clk[0]);
 #endif
 
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index ff5e33298914..b010bf9ceaab 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -651,8 +651,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 	_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
 	_REGISTER_CLOCK(NULL, "dma", dma_clk)
@@ -751,7 +751,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&emi_clk);
 	clk_enable(&iim_clk);
 
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	clk_enable(&uart1_clk);
 #endif
 
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 50199aff0143..3d398ce09b31 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -530,6 +530,84 @@ struct platform_device mxc_usbh2 = {
 };
 #endif
 
+static struct resource imx_ssi_resources0[] = {
+	{
+		.start	= SSI1_BASE_ADDR,
+		.end	= SSI1_BASE_ADDR + 0x6F,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_SSI1,
+		.end	= MXC_INT_SSI1,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.name	= "tx0",
+		.start	= DMA_REQ_SSI1_TX0,
+		.end	= DMA_REQ_SSI1_TX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx0",
+		.start	= DMA_REQ_SSI1_RX0,
+		.end	= DMA_REQ_SSI1_RX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "tx1",
+		.start	= DMA_REQ_SSI1_TX1,
+		.end	= DMA_REQ_SSI1_TX1,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx1",
+		.start	= DMA_REQ_SSI1_RX1,
+		.end	= DMA_REQ_SSI1_RX1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource imx_ssi_resources1[] = {
+	{
+		.start	= SSI2_BASE_ADDR,
+		.end	= SSI2_BASE_ADDR + 0x6F,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_SSI2,
+		.end	= MXC_INT_SSI2,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.name	= "tx0",
+		.start	= DMA_REQ_SSI2_TX0,
+		.end	= DMA_REQ_SSI2_TX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx0",
+		.start	= DMA_REQ_SSI2_RX0,
+		.end	= DMA_REQ_SSI2_RX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "tx1",
+		.start	= DMA_REQ_SSI2_TX1,
+		.end	= DMA_REQ_SSI2_TX1,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx1",
+		.start	= DMA_REQ_SSI2_RX1,
+		.end	= DMA_REQ_SSI2_RX1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device imx_ssi_device0 = {
+	.name = "imx-ssi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
+	.resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+	.name = "imx-ssi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
+	.resource = imx_ssi_resources1,
+};
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index d315406d6725..97306aa18f1c 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -26,4 +26,5 @@ extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
-
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c
new file mode 100644
index 000000000000..03dbbdc98955
--- /dev/null
+++ b/arch/arm/mach-mx2/mxt_td60.c
@@ -0,0 +1,319 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static unsigned int mxt_td60_pins[] __initdata = {
+	/* UART0 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART1 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART2 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART3 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* UART4 */
+	PB18_AF_UART5_TXD,
+	PB19_AF_UART5_RXD,
+	PB20_AF_UART5_CTS,
+	PB21_AF_UART5_RTS,
+	/* UART5 */
+	PB10_AF_UART6_TXD,
+	PB12_AF_UART6_CTS,
+	PB11_AF_UART6_RXD,
+	PB13_AF_UART6_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* FB */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA25_PF_CLS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* OWIRE */
+	PE16_AF_OWIRE,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	PF8_AF_ATA_IORDY,
+	/* SDHC2*/
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c_data = {
+	.bitrate = 100000,
+};
+
+/* PCA9557 */
+static int mxt_td60_pca9557_setup(struct i2c_client *client,
+				unsigned gpio_base, unsigned ngpio,
+				void *context)
+{
+	static int mxt_td60_gpio_value[] = {
+		-1, -1, -1, -1, -1, -1, -1, 1
+	};
+	int n;
+
+	for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
+		gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
+		if (mxt_td60_gpio_value[n] < 0)
+			gpio_direction_input(gpio_base + n);
+		else
+			gpio_direction_output(gpio_base + n,
+						mxt_td60_gpio_value[n]);
+		gpio_export(gpio_base + n, 0);
+	}
+
+	return 0;
+}
+
+static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
+	.gpio_base	= 240, /* place PCA9557 after all MX27 gpio pins */
+	.invert		= 0, /* Do not invert */
+	.setup		= mxt_td60_pca9557_setup,
+};
+
+static struct i2c_board_info mxt_td60_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pca9557", 0x18),
+		.platform_data = &mxt_td60_pca9557_pdata,
+	},
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c2_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info mxt_td60_i2c2_devices[] = {
+};
+
+static struct imx_fb_videomode mxt_td60_modes[] = {
+	{
+		.mode = {
+			.name		= "Chimei LW700AT9003",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 480,
+			.pixclock	= 30303,
+			.hsync_len	= 64,
+			.left_margin	= 0x67,
+			.right_margin	= 0x68,
+			.vsync_len	= 16,
+			.upper_margin	= 0x0f,
+			.lower_margin	= 0x0f,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFA208B83,
+	},
+};
+
+static struct imx_fb_platform_data mxt_td60_fb_data = {
+	.mode = mxt_td60_modes,
+	.num_modes = ARRAY_SIZE(mxt_td60_modes),
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
+static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+				void *data)
+{
+	return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
+				"sdhc1-card-detect", data);
+}
+
+static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOF(8), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mxt_td60_sdhc1_init,
+	.exit = mxt_td60_sdhc1_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static void __init mxt_td60_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
+			"MXT_TD60");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
+	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
+	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
+
+	i2c_register_board_info(0, mxt_td60_i2c_devices,
+				ARRAY_SIZE(mxt_td60_i2c_devices));
+
+	i2c_register_board_info(1, mxt_td60_i2c2_devices,
+				ARRAY_SIZE(mxt_td60_i2c2_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
+	mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
+	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mxt_td60_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mxt_td60_timer = {
+	.init	= mxt_td60_timer_init,
+};
+
+MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
+	/* maintainer: Maxtrack Industrial */
+	.phys_io	= AIPI_BASE_ADDR,
+	.io_pg_offst	= ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mx27_map_io,
+	.init_irq	= mx27_init_irq,
+	.init_machine	= mxt_td60_board_init,
+	.timer		= &mxt_td60_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
index fe5b165b88cc..aea3d340d2e1 100644
--- a/arch/arm/mach-mx2/pca100.c
+++ b/arch/arm/mach-mx2/pca100.c
@@ -237,7 +237,7 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = pca100_init,
 	.timer          = &pca100_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 851f2458bf65..ea8ed109a7c2 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -2,11 +2,13 @@ if ARCH_MX3
 
 config ARCH_MX31
 	select ARCH_HAS_RNGA
+	select ARCH_MXC_AUDMUX_V2
 	bool
 
 config ARCH_MX35
 	bool
 	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
 
 comment "MX3 platforms:"
 
@@ -61,6 +63,7 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
+	select MXC_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -100,4 +103,12 @@ config MACH_MX35_3DS
 	help
 	  Include support for MX35PDK platform. This includes specific
 	  configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+	select ARCH_MX31
+	help
+	  Include support for KZM-ARM11-01. This includes specific
+	  configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 6b9775471be6..93c7b296be6a 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -4,12 +4,12 @@
 
 # Object file lists.
 
-obj-y				:= mm.o devices.o
+obj-y				:= mm.o devices.o cpu.o
 obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
+obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o mx31lite-db.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
 obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
@@ -19,3 +19,4 @@ obj-$(CONFIG_MACH_QONG)		+= qong.o
 obj-$(CONFIG_MACH_PCM043)	+= pcm043.o
 obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
 obj-$(CONFIG_MACH_MX35_3DS)	+= mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01)	+= kzmarm11.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index 776c0ee1b3cd..54aab401dbdf 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -33,6 +33,9 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -97,6 +100,47 @@ static int armadillo5x0_pins[] = {
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_DRDY0__DRDY0,
 	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+	/* I2C2 */
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+};
+
+/* RTC over I2C*/
+#define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
+
+static struct i2c_board_info armadillo5x0_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+/* GPIO BUTTONS */
+static struct gpio_keys_button armadillo5x0_buttons[] = {
+	{
+		.code		= KEY_ENTER, /*28*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SCLK0),
+		.active_low	= 1,
+		.desc		= "menu",
+		.wakeup		= 1,
+	}, {
+		.code		= KEY_BACK, /*158*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SRST0),
+		.active_low	= 1,
+		.desc		= "back",
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data armadillo5x0_button_data = {
+	.buttons	= armadillo5x0_buttons,
+	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
+};
+
+static struct platform_device armadillo5x0_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &armadillo5x0_button_data,
+	}
 };
 
 /*
@@ -278,7 +322,7 @@ static struct resource armadillo5x0_smc911x_resources[] = {
 };
 
 static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_32BIT,
+	.flags		= SMSC911X_USE_16BIT,
 	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
 };
@@ -300,6 +344,8 @@ static struct imxuart_platform_data uart_pdata = {
 
 static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
+	&mxc_i2c_device1,
+	&armadillo5x0_button_device,
 };
 
 /*
@@ -335,6 +381,18 @@ static void __init armadillo5x0_init(void)
 
 	/* set NAND page size to 2k if not configured via boot mode pins */
 	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+
+	/* RTC */
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
+			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+		else
+			gpio_free(ARMADILLO5X0_RTC_GPIO);
+	}
+	if (armadillo5x0_i2c_rtc.irq == 0)
+		pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
+	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
 }
 
 static void __init armadillo5x0_timer_init(void)
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index c595260ec1f9..7584b4c6c556 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -335,7 +335,7 @@ static void clk_cgr_disable(struct clk *clk)
 
 DEFINE_CLOCK(asrc_clk,   0, CCM_CGR0,  0, NULL, NULL);
 DEFINE_CLOCK(ata_clk,    0, CCM_CGR0,  2, get_rate_ipg, NULL);
-DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL);
+/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL); */
 DEFINE_CLOCK(can1_clk,   0, CCM_CGR0,  6, get_rate_ipg, NULL);
 DEFINE_CLOCK(can2_clk,   1, CCM_CGR0,  8, get_rate_ipg, NULL);
 DEFINE_CLOCK(cspi1_clk,  0, CCM_CGR0, 10, get_rate_ipg, NULL);
@@ -381,12 +381,43 @@ DEFINE_CLOCK(uart3_clk,  2, CCM_CGR2, 20, get_rate_uart, NULL);
 DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
 DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
 DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
-DEFINE_CLOCK(admux_clk,  0, CCM_CGR2, 30, NULL, NULL);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGR2, 30, NULL, NULL);
 
 DEFINE_CLOCK(csi_clk,    0, CCM_CGR3,  0, get_rate_csi, NULL);
 DEFINE_CLOCK(iim_clk,    0, CCM_CGR3,  2, NULL, NULL);
 DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
 
+DEFINE_CLOCK(usbahb_clk, 0, 0,         0, get_rate_ahb, NULL);
+
+static int clk_dummy_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static void clk_dummy_disable(struct clk *clk)
+{
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+	unsigned long div1;
+
+	div1 = (__raw_readl(CCM_BASE + CCM_PDR4) >> 28) + 1;
+
+	return get_rate_ahb(NULL) / div1;
+}
+
+/* NAND Controller: It seems it can't be disabled */
+static struct clk nfc_clk = {
+	.id		= 0,
+	.enable_reg	= 0,
+	.enable_shift	= 0,
+	.get_rate	= get_rate_nfc,
+	.set_rate	= NULL, /* set_rate_nfc, */
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable
+};
+
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
 		.dev_id = d,		\
@@ -397,7 +428,6 @@ DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
-	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK(NULL, "can", can1_clk)
 	_REGISTER_CLOCK(NULL, "can", can2_clk)
 	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
@@ -434,8 +464,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "sdma", sdma_clk)
 	_REGISTER_CLOCK(NULL, "spba", spba_clk)
 	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
@@ -443,12 +473,14 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
 	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
-	_REGISTER_CLOCK(NULL, "admux", admux_clk)
+	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
 	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 	_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 };
 
 int __init mx35_clocks_init()
@@ -456,7 +488,7 @@ int __init mx35_clocks_init()
 	int i;
 	unsigned int ll = 0;
 
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	ll = (3 << 16);
 #endif
 
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index b2a3bcf8266e..27a318af0d20 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -558,8 +558,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
 	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
 	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK(NULL, "firi", firi_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
@@ -616,6 +616,8 @@ int __init mx31_clocks_init(unsigned long fref)
 
 	clk_enable(&serial_pll_clk);
 
+	mx31_read_cpu_rev();
+
 	if (mx31_revision() >= CHIP_REV_2_0) {
 		reg = __raw_readl(MXC_CCM_PMCR1);
 		/* No PLL restart on DVFS switch; enable auto EMI handshake */
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
new file mode 100644
index 000000000000..db828809c675
--- /dev/null
+++ b/arch/arm/mach-mx3/cpu.c
@@ -0,0 +1,57 @@
+/*
+ * MX3 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+unsigned int mx31_cpu_rev;
+EXPORT_SYMBOL(mx31_cpu_rev);
+
+struct mx3_cpu_type {
+	u8 srev;
+	const char *name;
+	const char *v;
+	unsigned int rev;
+};
+
+static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
+	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = CHIP_REV_1_0	},
+	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = CHIP_REV_1_1	},
+	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = CHIP_REV_1_1	},
+	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = CHIP_REV_1_1	},
+	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = CHIP_REV_1_1	},
+	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = CHIP_REV_1_2	},
+	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = CHIP_REV_1_2	},
+	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = CHIP_REV_2_0	},
+	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = CHIP_REV_2_0	},
+};
+
+void __init mx31_read_cpu_rev(void)
+{
+	u32 i, srev;
+
+	/* read SREV register from IIM module */
+	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+
+	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
+		if (srev == mx31_cpu_type[i].srev) {
+			printk(KERN_INFO
+				"CPU identified as %s, silicon rev %s\n",
+				mx31_cpu_type[i].name, mx31_cpu_type[i].v);
+
+			mx31_cpu_rev = mx31_cpu_type[i].rev;
+			return;
+		}
+
+	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
+}
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index e6abe181b967..6adb586515ea 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -537,6 +537,44 @@ struct platform_device mxc_fec_device = {
 };
 #endif
 
+static struct resource imx_ssi_resources0[] = {
+	{
+		.start	= SSI1_BASE_ADDR,
+		.end	= SSI1_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX31_INT_SSI1,
+		.end	= MX31_INT_SSI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_ssi_resources1[] = {
+	{
+		.start	= SSI2_BASE_ADDR,
+		.end	= SSI2_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MX31_INT_SSI2,
+		.end	= MX31_INT_SSI2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_ssi_device0 = {
+	.name = "imx-ssi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
+	.resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+	.name = "imx-ssi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
+	.resource = imx_ssi_resources1,
+};
+
 static int mx3_devices_init(void)
 {
 	if (cpu_is_mx31()) {
@@ -546,7 +584,7 @@ static int mx3_devices_init(void)
 	}
 	if (cpu_is_mx35()) {
 		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
-		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff;
 		otg_resources[0].start = MX35_OTG_BASE_ADDR;
 		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
 		otg_resources[1].start = MXC_INT_USBOTG;
@@ -555,6 +593,10 @@ static int mx3_devices_init(void)
 		mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
 		mxc_usbh1_resources[1].start = MXC_INT_USBHS;
 		mxc_usbh1_resources[1].end = MXC_INT_USBHS;
+		imx_ssi_resources0[1].start = MX35_INT_SSI1;
+		imx_ssi_resources0[1].end = MX35_INT_SSI1;
+		imx_ssi_resources1[1].start = MX35_INT_SSI2;
+		imx_ssi_resources1[1].end = MX35_INT_SSI2;
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index ab87419dc9a0..42cf175eac6b 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -23,4 +23,6 @@ extern struct platform_device mxc_rnga_device;
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
 
diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/kzmarm11.c
new file mode 100644
index 000000000000..6fa99ce3008a
--- /dev/null
+++ b/arch/arm/mach-mx3/kzmarm11.c
@@ -0,0 +1,268 @@
+/*
+ * KZM-ARM11-01 support
+ *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ * based on code for MX31ADS,
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-kzmarm11.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/memory.h>
+
+#include "devices.h"
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+/*
+ * KZM-ARM11-01 has an external UART on FPGA
+ */
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase	= IO_ADDRESS(KZM_ARM11_16550),
+		.mapbase	= KZM_ARM11_16550,
+		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.irqflags	= IRQ_TYPE_EDGE_RISING,
+		.uartclk	= 14745600,
+		.regshift	= 0,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_BUGGY_UART,
+	},
+	{},
+};
+
+static struct resource serial8250_resources[] = {
+	{
+		.start	= KZM_ARM11_16550,
+		.end	= KZM_ARM11_16550 + 0x10,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+				.platform_data = serial_platform_data,
+			  },
+	.num_resources	= ARRAY_SIZE(serial8250_resources),
+	.resource	= serial8250_resources,
+};
+
+static int __init kzm_init_ext_uart(void)
+{
+	u8 tmp;
+
+	/*
+	 * GPIO 1-1: external UART interrupt line
+	 */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+	/*
+	 * Unmask UART interrupt
+	 */
+	tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
+	tmp |= 0x2;
+	__raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
+
+	return platform_device_register(&serial_device);
+}
+#else
+static inline int kzm_init_ext_uart(void)
+{
+	return 0;
+}
+#endif
+
+/*
+ * SMSC LAN9118
+ */
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct smsc911x_platform_config kzm_smsc9118_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct resource kzm_smsc9118_resources[] = {
+	{
+		.start	= CS5_BASE_ADDR,
+		.end	= CS5_BASE_ADDR + SZ_128K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device kzm_smsc9118_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kzm_smsc9118_resources),
+	.resource	= kzm_smsc9118_resources,
+	.dev		= {
+				.platform_data = &kzm_smsc9118_config,
+			  },
+};
+
+static int __init kzm_init_smsc9118(void)
+{
+	/*
+	 * GPIO 1-2: SMSC9118 interrupt line
+	 */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+
+	return platform_device_register(&kzm_smsc9118_device);
+}
+#else
+static inline int kzm_init_smsc9118(void)
+{
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static void __init kzm_init_imx_uart(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+}
+#else
+static inline void kzm_init_imx_uart(void)
+{
+}
+#endif
+
+static int kzm_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_DCD_DCE1__DCD_DCE1,
+	MX31_PIN_RI_DCE1__RI_DCE1,
+	MX31_PIN_DSR_DCE1__DSR_DCE1,
+	MX31_PIN_DTR_DCE1__DTR_DCE1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_DCD_DTE1__DCD_DTE2,
+	MX31_PIN_RI_DTE1__RI_DTE2,
+	MX31_PIN_DSR_DTE1__DSR_DTE2,
+	MX31_PIN_DTR_DTE1__DTR_DTE2,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init kzm_board_init(void)
+{
+	mxc_iomux_setup_multiple_pins(kzm_pins,
+				      ARRAY_SIZE(kzm_pins), "kzm");
+	kzm_init_ext_uart();
+	kzm_init_smsc9118();
+	kzm_init_imx_uart();
+
+	pr_info("Clock input source is 26MHz\n");
+}
+
+/*
+ * This structure defines static mappings for the kzm-arm11-01 board.
+ */
+static struct map_desc kzm_io_desc[] __initdata = {
+	{
+		.virtual	= CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
+		.length		= CS4_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= CS5_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(CS5_BASE_ADDR),
+		.length		= CS5_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init kzm_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
+}
+
+static void __init kzm_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer kzm_timer = {
+	.init   = kzm_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros define in arch.h in order to
+ * initialize __mach_desc_KZM_ARM11_01 data structure.
+ */
+MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
+	.phys_io        = AIPS1_BASE_ADDR,
+	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = kzm_map_io,
+	.init_irq       = mx31_init_irq,
+	.init_machine   = kzm_board_init,
+	.timer          = &kzm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
index 3b3a78f49c23..7aebd74a12e8 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -109,6 +109,9 @@ static int mxc_mmc1_get_ro(struct device *dev)
 
 static int gpio_det, gpio_wp;
 
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
 static int mxc_mmc1_init(struct device *dev,
 			 irq_handler_t detect_irq, void *data)
 {
@@ -117,6 +120,13 @@ static int mxc_mmc1_init(struct device *dev,
 	gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
 	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
 
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
+
 	ret = gpio_request(gpio_det, "MMC detect");
 	if (ret)
 		return ret;
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
index 423025150f6f..9ce029f554b9 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -31,6 +31,8 @@
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
 #include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/mc13783.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,6 +43,7 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -108,7 +111,36 @@ static struct platform_device physmap_flash_device = {
 static struct platform_device *devices[] __initdata = {
 	&smsc91x_device,
 	&physmap_flash_device,
-	&mxc_i2c_device1,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info mc13783_dev __initdata = {
+	.modalias	= "mc13783",
+	.max_speed_hz	= 1000000,
+	.bus_num	= 1,
+	.chip_select	= 0,
+	.platform_data	= &mc13783_pdata,
 };
 
 static int mx31lilly_baseboard;
@@ -128,8 +160,27 @@ static void __init mx31lilly_board_init(void)
 	}
 
 	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
+
+	/* SPI */
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
+
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
+
+	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(&mc13783_dev, 1);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
new file mode 100644
index 000000000000..694611d6b057
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -0,0 +1,198 @@
+/*
+ *  LogicPD i.MX31 SOM-LV development board support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lite.h>
+#include <mach/mmc.h>
+#include <mach/spi.h>
+
+#include "devices.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
+ * If you design an own baseboard for the module, use this file as base
+ * for support code.
+ */
+
+static unsigned int litekit_db_board_pins[] __initdata = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* SPI 0 */
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+};
+
+/* UART */
+static struct imxuart_platform_data uart_pdata __initdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC */
+
+static int gpio_det, gpio_wp;
+
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int mxc_mmc1_init(struct device *dev,
+			 irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
+
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
+
+	ret = gpio_request(gpio_det, "MMC detect");
+	if (ret)
+		return ret;
+
+	ret = gpio_request(gpio_wp, "MMC w/p");
+	if (ret)
+		goto exit_free_det;
+
+	gpio_direction_input(gpio_det);
+	gpio_direction_input(gpio_wp);
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "MMC detect", data);
+	if (ret)
+		goto exit_free_wp;
+
+	return 0;
+
+exit_free_wp:
+	gpio_free(gpio_wp);
+
+exit_free_det:
+	gpio_free(gpio_det);
+
+	return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+	gpio_free(gpio_det);
+	gpio_free(gpio_wp);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static struct imxmmc_platform_data mmc_pdata = {
+	.get_ro	 = mxc_mmc1_get_ro,
+	.init	   = mxc_mmc1_init,
+	.exit	   = mxc_mmc1_exit,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+	.chipselect	= spi_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+};
+
+/* GPIO LEDs */
+
+static struct gpio_led litekit_leds[] = {
+	{
+		.name           = "GPIO0",
+		.gpio           = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
+		.active_low     = 1,
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	{
+		.name           = "GPIO1",
+		.gpio           = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
+		.active_low     = 1,
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	}
+};
+
+static struct gpio_led_platform_data litekit_led_platform_data = {
+	.leds           = litekit_leds,
+	.num_leds       = ARRAY_SIZE(litekit_leds),
+};
+
+static struct platform_device litekit_led_device = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data = &litekit_led_platform_data,
+	},
+};
+
+void __init mx31lite_db_init(void)
+{
+	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
+					ARRAY_SIZE(litekit_db_board_pins),
+					"development board pins");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	platform_device_register(&litekit_led_device);
+}
+
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index a8d57decdfdb..def6b6736594 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -2,6 +2,7 @@
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
  *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,38 +26,47 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
 #include <mach/board-mx31lite.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/irqs.h>
 #include <mach/mxc_nand.h>
+#include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
 #include "devices.h"
 
 /*
- * This file contains the board-specific initialization routines.
+ * This file contains the module-specific initialization routines.
  */
 
 static unsigned int mx31lite_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
 	/* LAN9117 IRQ pin */
 	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
+	/* SPI 1 */
+	MX31_PIN_CSPI2_SCLK__SCLK,
+	MX31_PIN_CSPI2_MOSI__MOSI,
+	MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0,
+	MX31_PIN_CSPI2_SS1__SS1,
+	MX31_PIN_CSPI2_SS2__SS2,
 };
 
 static struct mxc_nand_platform_data mx31lite_nand_board_info = {
@@ -93,6 +103,111 @@ static struct platform_device smsc911x_device = {
 };
 
 /*
+ * SPI
+ *
+ * The MC13783 is the only hard-wired SPI device on the module.
+ */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect	= spi_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.flags  = MC13783_USE_RTC |
+		  MC13783_USE_REGULATOR,
+};
+
+static struct spi_board_info mc13783_spi_dev __initdata = {
+	.modalias       = "mc13783",
+	.max_speed_hz   = 1000000,
+	.bus_num	= 1,
+	.chip_select    = 0,
+	.platform_data  = &mc13783_pdata,
+	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+};
+
+/*
+ * USB
+ */
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int pins[] = {
+		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+		MX31_PIN_USBH2_CLK__USBH2_CLK,
+		MX31_PIN_USBH2_DIR__USBH2_DIR,
+		MX31_PIN_USBH2_NXT__USBH2_NXT,
+		MX31_PIN_USBH2_STP__USBH2_STP,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	/* chip select */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
+				"USBH2_CS");
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init   = usbh2_init,
+	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+/*
+ * NOR flash
+ */
+
+static struct physmap_flash_data nor_flash_data = {
+	.width  = 2,
+};
+
+static struct resource nor_flash_resource = {
+	.start  = 0xa0000000,
+	.end    = 0xa1ffffff,
+	.flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+	.name   = "physmap-flash",
+	.id     = 0,
+	.dev    = {
+		.platform_data  = &nor_flash_data,
+	},
+	.resource = &nor_flash_resource,
+	.num_resources = 1,
+};
+
+
+
+/*
  * This structure defines the MX31 memory map.
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
@@ -118,19 +233,40 @@ void __init mx31lite_map_io(void)
 	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
 }
 
-/*
- * Board specific initialization.
- */
+static int mx31lite_baseboard;
+core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
+
 static void __init mxc_board_init(void)
 {
 	int ret;
 
+	switch (mx31lite_baseboard) {
+	case MX31LITE_NOBOARD:
+		break;
+	case MX31LITE_DB:
+		mx31lite_db_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
+				mx31lite_baseboard);
+	}
+
 	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
 				      "mx31lite");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	/* NOR and NAND flash */
+	platform_device_register(&physmap_flash_device);
 	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
 
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(&mc13783_spi_dev, 1);
+
+	/* USB */
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
 	if (ret)
@@ -150,12 +286,7 @@ struct sys_timer mx31lite_timer = {
 	.init	= mx31lite_timer_init,
 };
 
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31LITE data structure.
- */
-
-MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
+MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.phys_io        = AIPS1_BASE_ADDR,
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 5592cdb8d0ad..8fc624f141cb 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -22,11 +22,15 @@
 #include <linux/platform_device.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
@@ -39,6 +43,12 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* USB H1 */
+	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -98,6 +108,80 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= devboard_sdhc2_exit,
 };
 
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int devboard_usbh1_hw_init(struct platform_device *pdev)
+{
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+	return 0;
+}
+
+#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int devboard_isp1105_init(struct otg_transceiver *otg)
+{
+	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+	if (ret)
+		return ret;
+	/* single ended */
+	gpio_direction_output(USBH1_MODE, 0);
+
+	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+	if (ret) {
+		gpio_free(USBH1_MODE);
+		return ret;
+	}
+	gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+
+static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+	if (on)
+		gpio_set_value(USBH1_VBUSEN_B, 0);
+	else
+		gpio_set_value(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.init	= devboard_usbh1_hw_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static int __init devboard_usbh1_init(void)
+{
+	struct otg_transceiver *otg;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	otg->label	= "ISP1105";
+	otg->init	= devboard_isp1105_init;
+	otg->set_vbus	= devboard_isp1105_set_vbus;
+
+	usbh1_pdata.otg = otg;
+
+	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -111,4 +195,6 @@ void __init mx31moboard_devboard_init(void)
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	devboard_usbh1_init();
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 2bfaffb344f0..85184a35e674 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,17 +16,26 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include <media/soc_camera.h>
 
 #include "devices.h"
 
@@ -37,7 +46,6 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
 	/* CSI */
-	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
 	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
 	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
 	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
@@ -45,10 +53,19 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
 	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5,
 	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	MX31_PIN_TXD2__GPIO1_28,
 	/* dsPIC resets */
 	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
+	/*battery detection */
+	MX31_PIN_LCS0__GPIO3_23,
+	/* USB H1 */
+	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -120,6 +137,166 @@ static void dspics_resets_init(void)
 	}
 }
 
+static struct spi_board_info marxbot_spi_board_info[] __initdata = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 300000,
+		.bus_num = 1,
+		.chip_select = 1, /* according spi1_cs[] ! */
+	},
+};
+
+#define TURRETCAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define BASECAM_POWER	IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
+#define TURRETCAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+#define BASECAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_CSI_D4)
+#define CAM_CHOICE	IOMUX_TO_GPIO(MX31_PIN_TXD2)
+
+static int marxbot_basecam_power(struct device *dev, int on)
+{
+	gpio_set_value(BASECAM_POWER, !on);
+	return 0;
+}
+
+static int marxbot_basecam_reset(struct device *dev)
+{
+	gpio_set_value(BASECAM_RST_B, 0);
+	udelay(100);
+	gpio_set_value(BASECAM_RST_B, 1);
+	return 0;
+}
+
+static struct i2c_board_info marxbot_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link base_iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= marxbot_basecam_power,
+	.reset		= marxbot_basecam_reset,
+	.board_info	= &marxbot_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9t031",
+};
+
+static struct platform_device marxbot_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &base_iclink,
+		},
+	},
+};
+
+static struct platform_device *marxbot_cameras[] __initdata = {
+	&marxbot_camera[0],
+};
+
+static int __init marxbot_cam_init(void)
+{
+	int ret = gpio_request(CAM_CHOICE, "cam-choice");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_CHOICE, 1);
+
+	ret = gpio_request(BASECAM_RST_B, "basecam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(BASECAM_RST_B, 1);
+	ret = gpio_request(BASECAM_POWER, "basecam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(BASECAM_POWER, 0);
+
+	ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(TURRETCAM_RST_B, 1);
+	ret = gpio_request(TURRETCAM_POWER, "turretcam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(TURRETCAM_POWER, 0);
+
+	return 0;
+}
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int marxbot_usbh1_hw_init(struct platform_device *pdev)
+{
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+	return 0;
+}
+
+#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int marxbot_isp1105_init(struct otg_transceiver *otg)
+{
+	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+	if (ret)
+		return ret;
+	/* single ended */
+	gpio_direction_output(USBH1_MODE, 0);
+
+	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+	if (ret) {
+		gpio_free(USBH1_MODE);
+		return ret;
+	}
+	gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+
+static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+	if (on)
+		gpio_set_value(USBH1_VBUSEN_B, 0);
+	else
+		gpio_set_value(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.init	= marxbot_usbh1_hw_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static int __init marxbot_usbh1_init(void)
+{
+	struct otg_transceiver *otg;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	otg->label	= "ISP1105";
+	otg->init	= marxbot_isp1105_init;
+	otg->set_vbus	= marxbot_isp1105_set_vbus;
+
+	usbh1_pdata.otg = otg;
+
+	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -133,4 +310,17 @@ void __init mx31moboard_marxbot_init(void)
 	dspics_resets_init();
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	spi_register_board_info(marxbot_spi_board_info,
+		ARRAY_SIZE(marxbot_spi_board_info));
+
+	marxbot_cam_init();
+	platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras));
+
+	/* battery present pin */
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+	gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
+
+	marxbot_usbh1_init();
 }
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 9243de54041a..b70529145936 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
@@ -26,8 +27,14 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -37,16 +44,20 @@
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
 #include <mach/i2c.h>
 #include <mach/mmc.h>
-#include <mach/mx31.h>
+#include <mach/mxc_ehci.h>
+#include <mach/mx3_camera.h>
+#include <mach/spi.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
 static unsigned int moboard_pins[] = {
 	/* UART0 */
-	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
 	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS1__GPIO2_7,
 	/* UART4 */
 	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
 	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
@@ -73,12 +84,31 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
 	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
 	MX31_PIN_USB_OC__GPIO1_30,
+	/* USB H2 */
+	MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+	MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+	MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
+	MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
+	MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
+	MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
+	MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
+	MX31_PIN_SCK6__GPIO1_25,
 	/* LEDs */
 	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
 	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
 	/* SEL */
 	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+	/* SPI1 */
+	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
+	/* Atlas IRQ */
+	MX31_PIN_GPIO1_3__GPIO1_3,
+	/* SPI2 */
+	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
+	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -101,7 +131,18 @@ static struct platform_device mx31moboard_flash = {
 	.num_resources = 1,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static int moboard_uart0_init(struct platform_device *pdev)
+{
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+	return 0;
+}
+
+static struct imxuart_platform_data uart0_pdata = {
+	.init = moboard_uart0_init,
+};
+
+static struct imxuart_platform_data uart4_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -113,6 +154,103 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = {
 	.bitrate = 100000,
 };
 
+static int moboard_spi1_cs[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master moboard_spi1_master = {
+	.chipselect	= moboard_spi1_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
+};
+
+static struct regulator_consumer_supply sdhc_consumers[] = {
+	{
+		.dev	= &mxcsdhc_device0.dev,
+		.supply	= "sdhc0_vcc",
+	},
+	{
+		.dev	= &mxcsdhc_device1.dev,
+		.supply	= "sdhc1_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
+	.consumer_supplies = sdhc_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev	= &mx3_camera.dev,
+		.supply	= "cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+static struct mc13783_regulator_init_data moboard_regulators[] = {
+	{
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &sdhc_vreg_data,
+	},
+	{
+		.id = MC13783_REGU_VCAM,
+		.init_data = &cam_vreg_data,
+	},
+};
+
+static struct mc13783_platform_data moboard_pmic = {
+	.regulators = moboard_regulators,
+	.num_regulators = ARRAY_SIZE(moboard_regulators),
+	.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
+		MC13783_USE_ADC,
+};
+
+static struct spi_board_info moboard_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+		.max_speed_hz = 300000,
+		.bus_num = 1,
+		.chip_select = 0,
+		.platform_data = &moboard_pmic,
+		.mode = SPI_CS_HIGH,
+	},
+};
+
+static int moboard_spi2_cs[] = {
+	MXC_SPI_CS(1),
+};
+
+static struct spi_imx_master moboard_spi2_master = {
+	.chipselect	= moboard_spi2_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
+};
+
 #define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
 #define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
 
@@ -208,6 +346,56 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
+
+static int moboard_usbh2_hw_init(struct platform_device *pdev)
+{
+	int ret = gpio_request(USBH2_EN_B, "usbh2-en");
+	if (ret)
+		return ret;
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	gpio_direction_output(USBH2_EN_B, 0);
+
+	return 0;
+}
+
+static int moboard_usbh2_hw_exit(struct platform_device *pdev)
+{
+	gpio_free(USBH2_EN_B);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= moboard_usbh2_hw_init,
+	.exit	= moboard_usbh2_hw_exit,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static int __init moboard_usbh2_init(void)
+{
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
+}
+
+
 static struct gpio_led mx31moboard_leds[] = {
 	{
 		.name 	= "coreboard-led-0:red:running",
@@ -266,11 +454,48 @@ static void mx31moboard_init_sel_gpios(void)
 	}
 }
 
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 	&mx31moboard_leds_device,
 };
 
+static struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 4800,
+};
+
+#define CAMERA_BUF_SIZE	(4*1024*1024)
+
+static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static int mx31moboard_baseboard;
 core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
 
@@ -284,20 +509,34 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata);
+	mxc_register_device(&mxc_uart_device0, &uart0_pdata);
+
+	mxc_register_device(&mxc_uart_device4, &uart4_pdata);
 
 	mx31moboard_init_sel_gpios();
 
 	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
 	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
 
+	mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
+	mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+	spi_register_board_info(moboard_spi_board_info,
+		ARRAY_SIZE(moboard_spi_board_info));
+
 	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
 
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
+		mxc_register_device(&mx3_camera, &camera_pdata);
+
 	usb_xcvr_reset();
 
 	moboard_usbotg_init();
 	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+	moboard_usbh2_init();
 
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
index 6ff186e46ceb..0bbc65ea23c8 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/memory.h>
 #include <linux/gpio.h>
+#include <linux/fsl_devices.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -69,6 +70,15 @@ static struct pad_desc mx35pdk_pads[] = {
 	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
 	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
 	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* USBOTG */
+	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+};
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
 /*
@@ -81,6 +91,8 @@ static void __init mxc_board_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
 
 static void __init mx35pdk_timer_init(void)
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index e18a224671fa..e3aa829be586 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -43,6 +43,7 @@
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
 
@@ -206,6 +207,11 @@ static struct pad_desc pcm043_pads[] = {
 	MX35_PAD_ATA_CS0__GPIO2_6,
 };
 
+static struct mxc_nand_platform_data pcm037_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
 /*
  * Board specific initialization.
  */
@@ -216,6 +222,7 @@ static void __init mxc_board_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 2a02b49c40f0..3c5e0f522e9c 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -5,13 +5,13 @@ menu "Nomadik boards"
 config MACH_NOMADIK_8815NHK
 	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
 	select NOMADIK_8815
+	select HAS_MTU
 
 endmenu
 
 config NOMADIK_8815
 	bool
 
-
 config I2C_BITBANG_8815NHK
 	tristate "Driver for bit-bang busses found on the 8815 NHK"
 	depends on I2C && MACH_NOMADIK_8815NHK
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 412040982a40..36f67fb207d2 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
 
 # Object file lists.
 
-obj-y			+= clock.o timer.o gpio.o
+obj-y			+= clock.o gpio.o
 
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 6bfd537d5afb..116394484e71 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -25,11 +25,18 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+
+#include <plat/mtu.h>
+
 #include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
 #include "clock.h"
 
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK	0x00007fff
+#define SRC_CR_INIT_VAL		0x2aaa8000
+
 /* These adresses span 16MB, so use three individual pages */
 static struct resource nhk8815_nand_resources[] = {
 	{
@@ -239,6 +246,26 @@ static struct platform_device *nhk8815_platform_devices[] __initdata = {
 	/* will add more devices */
 };
 
+static void __init nomadik_timer_init(void)
+{
+	u32 src_cr;
+
+	/* Configure timer sources in "system reset controller" ctrl reg */
+	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+	src_cr &= SRC_CR_INIT_MASK;
+	src_cr |= SRC_CR_INIT_VAL;
+	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+
+	/* Save global pointer to mtu, used by platform timer code */
+	mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+
+	nmdk_timer_init();
+}
+
+static struct sys_timer nomadik_timer = {
+	.init	= nomadik_timer_init,
+};
+
 static void __init nhk8815_platform_init(void)
 {
 	int i;
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
index a4e468cf63da..b7897edf1f35 100644
--- a/arch/arm/mach-nomadik/include/mach/setup.h
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -15,7 +15,7 @@
 extern void cpu8815_map_io(void);
 extern void cpu8815_platform_init(void);
 extern void cpu8815_init_irq(void);
-extern struct sys_timer nomadik_timer;
+extern void nmdk_timer_init(void);
 
 #endif /* NOMADIK_8815 */
 
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 55ecc01ea206..27f489747bbd 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -11,6 +11,7 @@ config ARCH_OMAP850
 	depends on ARCH_OMAP1
 	bool "OMAP850 Based System"
 	select CPU_ARM926T
+	select ARCH_OMAP_OTG
 
 config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
@@ -56,6 +57,12 @@ config MACH_OMAP_HTCWIZARD
 	help
 	  HTC Wizard smartphone support (AKA QTEK 9100, ...)
 
+config MACH_HERALD
+	bool "HTC Herald"
+	depends on ARCH_OMAP850
+	help
+	  HTC Herald smartphone support (AKA T-Mobile Wing, ...)
+
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 6867cd3ad0b4..9ce17f13d3f1 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,8 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o clock.o irq.o mux.o serial.o devices.o
+obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o
+obj-y += clock.o clock_data.o opp_data.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
@@ -17,6 +18,9 @@ obj-$(CONFIG_PM) += pm.o sleep.o
 obj-$(CONFIG_OMAP_MBOX_FWK)	+= mailbox_mach.o
 mailbox_mach-objs		:= mailbox.o
 
+i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
+obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
+
 led-y := leds.o
 
 # Specific board support
@@ -34,6 +38,7 @@ obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o
 obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
+obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
 
 ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 # Innovator-1510 FPGA
@@ -47,3 +52,7 @@ led-$(CONFIG_MACH_OMAP_INNOVATOR)	+= leds-innovator.o
 led-$(CONFIG_MACH_OMAP_PERSEUS2)	+= leds-h2p2-debug.o
 led-$(CONFIG_MACH_OMAP_OSK)		+= leds-osk.o
 obj-$(CONFIG_LEDS)			+= $(led-y)
+
+ifneq ($(CONFIG_FB_OMAP),)
+obj-y += lcd_dma.o
+endif
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 8ad5cc3e83e3..7fc11c34b696 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -25,13 +25,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-ams-delta.h>
+#include <plat/board-ams-delta.h>
 #include <mach/gpio.h>
-#include <mach/keypad.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/keypad.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index a7ead1b93226..7e70c3c08da6 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -26,14 +27,13 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
-#include <mach/nand.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/board.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/board.h>
 
 /* fsample is pretty close to p2-sample */
 
@@ -100,6 +100,12 @@ static int fsample_keymap[] = {
 	0
 };
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
@@ -107,7 +113,7 @@ static struct resource smc91x_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= INT_730_MPU_EXT_NIRQ,
+		.start	= INT_7XX_MPU_EXT_NIRQ,
 		.end	= 0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
@@ -167,8 +173,40 @@ static struct platform_device nor_device = {
 	.resource	= &nor_resource,
 };
 
-static struct omap_nand_platform_data nand_data = {
-	.options	= NAND_SAMSUNG_LP_OPTIONS,
+static void nand_cmd_ctl(struct mtd_info *mtd, int cmd,	unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long mask;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+	if (ctrl & NAND_ALE)
+		mask |= 0x04;
+	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define FSAMPLE_NAND_RB_GPIO_PIN	62
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
+}
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct platform_nand_data nand_data = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.options		= NAND_SAMSUNG_LP_OPTIONS,
+		.part_probe_types	= part_probes,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= nand_cmd_ctl,
+		.dev_ready	= nand_dev_ready,
+	},
 };
 
 static struct resource nand_resource = {
@@ -178,7 +216,7 @@ static struct resource nand_resource = {
 };
 
 static struct platform_device nand_device = {
-	.name		= "omapnand",
+	.name		= "gen_nand",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nand_data,
@@ -190,14 +228,17 @@ static struct platform_device nand_device = {
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 };
 
 static struct resource kp_resources[] = {
 	[0] = {
-		.start	= INT_730_MPUIO_KEYPAD,
-		.end	= INT_730_MPUIO_KEYPAD,
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -233,13 +274,6 @@ static struct platform_device *devices[] __initdata = {
 	&lcd_device,
 };
 
-#define P2_NAND_RB_GPIO_PIN	62
-
-static int nand_dev_ready(struct omap_nand_platform_data *data)
-{
-	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
-}
-
 static struct omap_lcd_config fsample_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -250,9 +284,9 @@ static struct omap_board_config_kernel fsample_config[] = {
 
 static void __init omap_fsample_init(void)
 {
-	if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+	if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 		BUG();
-	nand_data.dev_ready = nand_dev_ready;
+	gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
 
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
@@ -309,7 +343,7 @@ static void __init omap_fsample_map_io(void)
 	/*
 	 * Hold GSM Reset until needed
 	 */
-	omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
 
 	/*
 	 * UARTs -> done automagically by 8250 driver
@@ -320,21 +354,21 @@ static void __init omap_fsample_map_io(void)
 	 */
 
 	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
 
 	/*
 	 * Ethernet support through the debug board
 	 * CS1 timings setup
 	 */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
 
 	/*
 	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
 	 * It is used as the Ethernet controller interrupt
 	 */
-	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 6c8a41f20e51..e1195a3467b8 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -23,10 +23,10 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 46098f546824..b30c4990744d 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -16,7 +16,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
 
 #include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index aab860307dca..fa7cecea19f9 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 #include <linux/i2c/tps65010.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/gpio.h>
@@ -37,14 +38,13 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/nand.h>
-#include <mach/irda.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/irda.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #include "board-h2.h"
 
@@ -179,11 +179,43 @@ static struct mtd_partition h2_nand_partitions[] = {
 	},
 };
 
-/* dip switches control NAND chip access:  8 bit, 16 bit, or neither */
-static struct omap_nand_platform_data h2_nand_data = {
-	.options	= NAND_SAMSUNG_LP_OPTIONS,
-	.parts		= h2_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(h2_nand_partitions),
+static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long mask;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+	if (ctrl & NAND_ALE)
+		mask |= 0x04;
+	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define H2_NAND_RB_GPIO_PIN	62
+
+static int h2_nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
+}
+
+static const char *h2_part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data h2_nand_platdata = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.nr_partitions		= ARRAY_SIZE(h2_nand_partitions),
+		.partitions		= h2_nand_partitions,
+		.options		= NAND_SAMSUNG_LP_OPTIONS,
+		.part_probe_types	= h2_part_probes,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= h2_nand_cmd_ctl,
+		.dev_ready	= h2_nand_dev_ready,
+
+	},
 };
 
 static struct resource h2_nand_resource = {
@@ -191,15 +223,21 @@ static struct resource h2_nand_resource = {
 };
 
 static struct platform_device h2_nand_device = {
-	.name		= "omapnand",
+	.name		= "gen_nand",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &h2_nand_data,
+		.platform_data	= &h2_nand_platdata,
 	},
 	.num_resources	= 1,
 	.resource	= &h2_nand_resource,
 };
 
+static struct smc91x_platdata h2_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource h2_smc91x_resources[] = {
 	[0] = {
 		.start	= OMAP1610_ETHR_START,		/* Physical */
@@ -216,6 +254,9 @@ static struct resource h2_smc91x_resources[] = {
 static struct platform_device h2_smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &h2_smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(h2_smc91x_resources),
 	.resource	= h2_smc91x_resources,
 };
@@ -368,8 +409,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
 
-#define H2_NAND_RB_GPIO_PIN	62
-
 static void __init h2_init(void)
 {
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 5e8877ce35e0..54b0f063e263 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -16,7 +16,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
 
 #include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 89586b80b8d5..6a7f9c391cf1 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -28,6 +28,7 @@
 #include <linux/input.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c/tps65010.h>
+#include <linux/smc91x.h>
 
 #include <asm/setup.h>
 #include <asm/page.h>
@@ -40,13 +41,12 @@
 #include <asm/mach/map.h>
 
 #include <mach/irqs.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/nand.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/dma.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/dma.h>
+#include <plat/common.h>
 
 #include "board-h3.h"
 
@@ -181,11 +181,43 @@ static struct mtd_partition nand_partitions[] = {
 	},
 };
 
-/* dip switches control NAND chip access:  8 bit, 16 bit, or neither */
-static struct omap_nand_platform_data nand_data = {
-	.options	= NAND_SAMSUNG_LP_OPTIONS,
-	.parts		= nand_partitions,
-	.nr_parts	= ARRAY_SIZE(nand_partitions),
+static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long mask;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+	if (ctrl & NAND_ALE)
+		mask |= 0x04;
+	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define H3_NAND_RB_GPIO_PIN	10
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
+}
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data nand_platdata = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.nr_partitions		= ARRAY_SIZE(nand_partitions),
+		.partitions		= nand_partitions,
+		.options		= NAND_SAMSUNG_LP_OPTIONS,
+		.part_probe_types	= part_probes,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= nand_cmd_ctl,
+		.dev_ready	= nand_dev_ready,
+
+	},
 };
 
 static struct resource nand_resource = {
@@ -193,15 +225,21 @@ static struct resource nand_resource = {
 };
 
 static struct platform_device nand_device = {
-	.name		= "omapnand",
+	.name		= "gen_nand",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &nand_data,
+		.platform_data	= &nand_platdata,
 	},
 	.num_resources	= 1,
 	.resource	= &nand_resource,
 };
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= OMAP1710_ETHR_START,		/* Physical */
@@ -218,6 +256,9 @@ static struct resource smc91x_resources[] = {
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 };
@@ -332,13 +373,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
 	},
 };
 
-#define H3_NAND_RB_GPIO_PIN	10
-
-static int nand_dev_ready(struct omap_nand_platform_data *data)
-{
-	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
-}
-
 static void __init h3_init(void)
 {
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
@@ -356,7 +390,7 @@ static void __init h3_init(void)
 	nand_resource.end += SZ_4K - 1;
 	if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 		BUG();
-	nand_data.dev_ready = nand_dev_ready;
+	gpio_direction_input(H3_NAND_RB_GPIO_PIN);
 
 	/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
 	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
new file mode 100644
index 000000000000..e36639f66150
--- /dev/null
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -0,0 +1,311 @@
+/*
+ * HTC Herald board configuration
+ * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
+ * Copyright (C) 2009 Wing Linux
+ *
+ * Based on the board-htcwizard.c file from the linwizard project:
+ * Copyright (C) 2006 Unai Uribarri
+ * Copyright (C) 2008 linwizard.sourceforge.net
+ *
+ * This  program is  free  software; you  can  redistribute it  and/or
+ * modify  it under the  terms of  the GNU  General Public  License as
+ * published by the Free Software  Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT  ANY  WARRANTY;  without   even  the  implied  warranty  of
+ * MERCHANTABILITY or  FITNESS FOR A PARTICULAR PURPOSE.   See the GNU
+ * General Public License for more details.
+ *
+ * You should have  received a copy of the  GNU General Public License
+ * along  with  this program;  if  not,  write  to the  Free  Software
+ * Foundation,  Inc.,  51 Franklin  Street,  Fifth  Floor, Boston,  MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/bootmem.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/omap7xx.h>
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/keypad.h>
+#include <plat/usb.h>
+
+#include <mach/irqs.h>
+
+#include <linux/delay.h>
+
+/* LCD register definition */
+#define       OMAP_LCDC_CONTROL               (0xfffec000 + 0x00)
+#define       OMAP_LCDC_STATUS                (0xfffec000 + 0x10)
+#define       OMAP_DMA_LCD_CCR                (0xfffee300 + 0xc2)
+#define       OMAP_DMA_LCD_CTRL               (0xfffee300 + 0xc4)
+#define       OMAP_LCDC_CTRL_LCD_EN           (1 << 0)
+#define       OMAP_LCDC_STAT_DONE             (1 << 0)
+
+static struct omap_lcd_config htcherald_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel htcherald_config[] __initdata = {
+	{ OMAP_TAG_LCD, &htcherald_lcd_config },
+};
+
+/* Keyboard definition */
+
+static int htc_herald_keymap[] = {
+	KEY(0, 0, KEY_RECORD), /* Mail button */
+	KEY(0, 1, KEY_CAMERA), /* Camera */
+	KEY(0, 2, KEY_PHONE), /* Send key */
+	KEY(0, 3, KEY_VOLUMEUP), /* Volume up */
+	KEY(0, 4, KEY_F2),  /* Right bar (landscape) */
+	KEY(0, 5, KEY_MAIL), /* Win key (portrait) */
+	KEY(0, 6, KEY_DIRECTORY), /* Right bar (protrait) */
+	KEY(1, 0, KEY_LEFTCTRL), /* Windows key */
+	KEY(1, 1, KEY_COMMA),
+	KEY(1, 2, KEY_M),
+	KEY(1, 3, KEY_K),
+	KEY(1, 4, KEY_SLASH), /* OK key */
+	KEY(1, 5, KEY_I),
+	KEY(1, 6, KEY_U),
+	KEY(2, 0, KEY_LEFTALT),
+	KEY(2, 1, KEY_TAB),
+	KEY(2, 2, KEY_N),
+	KEY(2, 3, KEY_J),
+	KEY(2, 4, KEY_ENTER),
+	KEY(2, 5, KEY_H),
+	KEY(2, 6, KEY_Y),
+	KEY(3, 0, KEY_SPACE),
+	KEY(3, 1, KEY_L),
+	KEY(3, 2, KEY_B),
+	KEY(3, 3, KEY_V),
+	KEY(3, 4, KEY_BACKSPACE),
+	KEY(3, 5, KEY_G),
+	KEY(3, 6, KEY_T),
+	KEY(4, 0, KEY_CAPSLOCK), /* Shift */
+	KEY(4, 1, KEY_C),
+	KEY(4, 2, KEY_F),
+	KEY(4, 3, KEY_R),
+	KEY(4, 4, KEY_O),
+	KEY(4, 5, KEY_E),
+	KEY(4, 6, KEY_D),
+	KEY(5, 0, KEY_X),
+	KEY(5, 1, KEY_Z),
+	KEY(5, 2, KEY_S),
+	KEY(5, 3, KEY_W),
+	KEY(5, 4, KEY_P),
+	KEY(5, 5, KEY_Q),
+	KEY(5, 6, KEY_A),
+	KEY(6, 0, KEY_CONNECT), /* Voice button */
+	KEY(6, 2, KEY_CANCEL), /* End key */
+	KEY(6, 3, KEY_VOLUMEDOWN), /* Volume down */
+	KEY(6, 4, KEY_F1), /* Left bar (landscape) */
+	KEY(6, 5, KEY_WWW), /* OK button (portrait) */
+	KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */
+	0
+};
+
+struct omap_kp_platform_data htcherald_kp_data = {
+	.rows	= 7,
+	.cols	= 7,
+	.delay = 20,
+	.rep = 1,
+	.keymap = htc_herald_keymap,
+};
+
+static struct resource kp_resources[] = {
+	[0] = {
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &htcherald_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(kp_resources),
+	.resource	= kp_resources,
+};
+
+/* USB Device */
+static struct omap_usb_config htcherald_usb_config __initdata = {
+	.otg = 0,
+	.register_host = 0,
+	.register_dev  = 1,
+	.hmc_mode = 4,
+	.pins[0] = 2,
+};
+
+/* LCD Device resources */
+static struct platform_device lcd_device = {
+	.name           = "lcd_htcherald",
+	.id             = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&kp_device,
+	&lcd_device,
+};
+
+/*
+ * Init functions from here on
+ */
+
+static void __init htcherald_lcd_init(void)
+{
+	u32 reg;
+	unsigned int tries = 200;
+
+	/* disable controller if active */
+	reg = omap_readl(OMAP_LCDC_CONTROL);
+	if (reg & OMAP_LCDC_CTRL_LCD_EN) {
+		reg &= ~OMAP_LCDC_CTRL_LCD_EN;
+		omap_writel(reg, OMAP_LCDC_CONTROL);
+
+		/* wait for end of frame */
+		while (!(omap_readl(OMAP_LCDC_STATUS) & OMAP_LCDC_STAT_DONE)) {
+			tries--;
+			if (!tries)
+				break;
+		}
+		if (!tries)
+			printk(KERN_WARNING "Timeout waiting for end of frame "
+			       "-- LCD may not be available\n");
+
+		/* turn off DMA */
+		reg = omap_readw(OMAP_DMA_LCD_CCR);
+		reg &= ~(1 << 7);
+		omap_writew(reg, OMAP_DMA_LCD_CCR);
+
+		reg = omap_readw(OMAP_DMA_LCD_CTRL);
+		reg &= ~(1 << 8);
+		omap_writew(reg, OMAP_DMA_LCD_CTRL);
+	}
+}
+
+static void __init htcherald_map_io(void)
+{
+	omap1_map_common_io();
+
+	/*
+	 * The LCD panel must be disabled and DMA turned off here, as doing
+	 * it later causes the LCD never to reinitialize.
+	 */
+	htcherald_lcd_init();
+
+	printk(KERN_INFO "htcherald_map_io done.\n");
+}
+
+static void __init htcherald_disable_watchdog(void)
+{
+	/* Disable watchdog if running */
+	if (omap_readl(OMAP_WDT_TIMER_MODE) & 0x8000) {
+		/*
+		 * disable a potentially running watchdog timer before
+		 * it kills us.
+		 */
+		printk(KERN_WARNING "OMAP850 Watchdog seems to be activated, disabling it for now.\n");
+		omap_writel(0xF5, OMAP_WDT_TIMER_MODE);
+		omap_writel(0xA0, OMAP_WDT_TIMER_MODE);
+	}
+}
+
+#define HTCHERALD_GPIO_USB_EN1 33
+#define HTCHERALD_GPIO_USB_EN2 73
+#define HTCHERALD_GPIO_USB_DM  35
+#define HTCHERALD_GPIO_USB_DP  36
+
+static void __init htcherald_usb_enable(void)
+{
+	unsigned int tries = 20;
+	unsigned int value = 0;
+
+	/* Request the GPIOs we need to control here */
+	if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0)
+		goto err1;
+
+	if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0)
+		goto err2;
+
+	if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0)
+		goto err3;
+
+	if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0)
+		goto err4;
+
+	/* force USB_EN GPIO to 0 */
+	do {
+		/* output low */
+		gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0);
+	} while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 &&
+			--tries);
+
+	if (value == 1)
+		printk(KERN_WARNING "Unable to reset USB, trying to continue\n");
+
+	gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */
+	gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */
+	gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */
+
+	goto done;
+
+err4:
+	gpio_free(HTCHERALD_GPIO_USB_DM);
+err3:
+	gpio_free(HTCHERALD_GPIO_USB_EN2);
+err2:
+	gpio_free(HTCHERALD_GPIO_USB_EN1);
+err1:
+	printk(KERN_ERR "Unabled to request GPIO for USB\n");
+done:
+	printk(KERN_INFO "USB setup complete.\n");
+}
+
+static void __init htcherald_init(void)
+{
+	printk(KERN_INFO "HTC Herald init.\n");
+
+	omap_gpio_init();
+
+	omap_board_config = htcherald_config;
+	omap_board_config_size = ARRAY_SIZE(htcherald_config);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	htcherald_disable_watchdog();
+
+	htcherald_usb_enable();
+	omap_usb_init(&htcherald_usb_config);
+}
+
+static void __init htcherald_init_irq(void)
+{
+	printk(KERN_INFO "htcherald_init_irq.\n");
+	omap1_init_common_hw();
+	omap_init_irq();
+}
+
+MACHINE_START(HERALD, "HTC Herald")
+	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
+	/* Maintainer: wing-linux.sourceforge.net */
+	.phys_io        = 0xfff00000,
+	.io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params    = 0x10000100,
+	.map_io         = htcherald_map_io,
+	.init_irq       = htcherald_init_irq,
+	.init_machine   = htcherald_init,
+	.timer          = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cd6c39514826..2133b006f6a3 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -23,6 +23,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -30,14 +31,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
-#include <mach/tc.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/mmc.h>
+#include <plat/tc.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/mmc.h>
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define INNOVATOR1610_ETHR_START	0x04000300
@@ -142,6 +143,11 @@ static struct platform_device innovator_kp_device = {
 	.resource	= innovator_kp_resources,
 };
 
+static struct smc91x_platdata innovator_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
 
 #ifdef CONFIG_ARCH_OMAP15XX
 
@@ -175,6 +181,9 @@ static struct resource innovator1510_smc91x_resources[] = {
 static struct platform_device innovator1510_smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &innovator_smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(innovator1510_smc91x_resources),
 	.resource	= innovator1510_smc91x_resources,
 };
@@ -241,6 +250,9 @@ static struct resource innovator1610_smc91x_resources[] = {
 static struct platform_device innovator1610_smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &innovator_smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(innovator1610_smc91x_resources),
 	.resource	= innovator1610_smc91x_resources,
 };
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index ed2a48a9ce74..71e1a3fad0ea 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/clk.h>
+#include <linux/omapfb.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -26,17 +27,16 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/dsp_common.h>
-#include <mach/omapfb.h>
-#include <mach/hwa742.h>
-#include <mach/lcd_mipid.h>
-#include <mach/mmc.h>
-#include <mach/clock.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/dsp_common.h>
+#include <plat/hwa742.h>
+#include <plat/lcd_mipid.h>
+#include <plat/mmc.h>
+#include <plat/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ed891b8a6b15..ccea4f448e9a 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -33,6 +33,7 @@
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <linux/leds.h>
+#include <linux/smc91x.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -47,10 +48,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/usb.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/common.h>
+#include <plat/usb.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/common.h>
 
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
 #define OMAP_OSK_ETHR_START		0x04800300
@@ -115,6 +116,12 @@ static struct platform_device osk5912_flash_device = {
 	.resource	= &osk_flash_resource,
 };
 
+static struct smc91x_platdata osk5912_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource osk5912_smc91x_resources[] = {
 	[0] = {
 		.start	= OMAP_OSK_ETHR_START,		/* Physical */
@@ -131,6 +138,9 @@ static struct resource osk5912_smc91x_resources[] = {
 static struct platform_device osk5912_smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
+	.dev	= {
+		.platform_data	= &osk5912_smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(osk5912_smc91x_resources),
 	.resource	= osk5912_smc91x_resources,
 };
@@ -312,7 +322,7 @@ static struct omap_board_config_kernel osk_config[] __initdata = {
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <mach/keypad.h>
+#include <plat/keypad.h>
 
 static struct at24_platform_data at24c04 = {
 	.byte_len	= SZ_4K / 8,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 4de258420f39..9fe887262bdf 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -34,14 +34,14 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/tc.h>
-#include <mach/dma.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/tc.h>
+#include <plat/dma.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #define PALMTE_USBDETECT_GPIO	0
 #define PALMTE_USB_OR_DC_GPIO	1
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index d972cf941b76..af068e3e0fe7 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -29,16 +29,16 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/led.h>
+#include <plat/led.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 986bd4df0e97..c7a3b6f36500 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -33,15 +33,15 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/omap-alsa.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 83406699f310..1387a4f15da9 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -26,14 +27,13 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
-#include <mach/nand.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/board.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/board.h>
 
 static int p2_keymap[] = {
 	KEY(0,0,KEY_UP),
@@ -67,6 +67,12 @@ static int p2_keymap[] = {
 	0
 };
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
@@ -74,7 +80,7 @@ static struct resource smc91x_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= INT_730_MPU_EXT_NIRQ,
+		.start	= INT_7XX_MPU_EXT_NIRQ,
 		.end	= 0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
@@ -134,8 +140,40 @@ static struct platform_device nor_device = {
 	.resource	= &nor_resource,
 };
 
-static struct omap_nand_platform_data nand_data = {
-	.options	= NAND_SAMSUNG_LP_OPTIONS,
+static void nand_cmd_ctl(struct mtd_info *mtd, int cmd,	unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long mask;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+	if (ctrl & NAND_ALE)
+		mask |= 0x04;
+	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define P2_NAND_RB_GPIO_PIN	62
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
+}
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct platform_nand_data nand_data = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.options		= NAND_SAMSUNG_LP_OPTIONS,
+		.part_probe_types	= part_probes,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= nand_cmd_ctl,
+		.dev_ready	= nand_dev_ready,
+	},
 };
 
 static struct resource nand_resource = {
@@ -145,7 +183,7 @@ static struct resource nand_resource = {
 };
 
 static struct platform_device nand_device = {
-	.name		= "omapnand",
+	.name		= "gen_nand",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nand_data,
@@ -157,14 +195,17 @@ static struct platform_device nand_device = {
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 };
 
 static struct resource kp_resources[] = {
 	[0] = {
-		.start	= INT_730_MPUIO_KEYPAD,
-		.end	= INT_730_MPUIO_KEYPAD,
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -201,13 +242,6 @@ static struct platform_device *devices[] __initdata = {
 	&lcd_device,
 };
 
-#define P2_NAND_RB_GPIO_PIN	62
-
-static int nand_dev_ready(struct omap_nand_platform_data *data)
-{
-	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
-}
-
 static struct omap_lcd_config perseus2_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -220,7 +254,7 @@ static void __init omap_perseus2_init(void)
 {
 	if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 		BUG();
-	nand_data.dev_ready = nand_dev_ready;
+	gpio_direction_input(P2_NAND_RB_GPIO_PIN);
 
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
@@ -270,7 +304,7 @@ static void __init omap_perseus2_map_io(void)
 	/*
 	 * Hold GSM Reset until needed
 	 */
-	omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
 
 	/*
 	 * UARTs -> done automagically by 8250 driver
@@ -281,21 +315,21 @@ static void __init omap_perseus2_map_io(void)
 	 */
 
 	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
 
 	/*
 	 * Ethernet support through the debug board
 	 * CS1 timings setup
 	 */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
 
 	/*
 	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
 	 * It is used as the Ethernet controller interrupt
 	 */
-	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 58a46e4e45c3..5b33ae8141bc 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -15,9 +15,9 @@
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
-#include <mach/board-sx1.h>
+#include <plat/board-sx1.h>
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 056ae64e0f55..7a97fac83d8d 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -33,15 +33,15 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/irda.h>
-#include <mach/usb.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/keypad.h>
-#include <mach/board-sx1.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/irda.h>
+#include <plat/usb.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/keypad.h>
+#include <plat/board-sx1.h>
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 07b07522d5bf..169183537997 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -22,6 +22,7 @@
 #include <linux/reboot.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -29,11 +30,11 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/common.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/usb.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/usb.h>
 
 static struct plat_serial8250_port voiceblue_ports[] = {
 	{
@@ -106,6 +107,12 @@ static struct platform_device voiceblue_flash_device = {
 	.resource	= &voiceblue_flash_resource,
 };
 
+static struct smc91x_platdata voiceblue_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource voiceblue_smc91x_resources[] = {
 	[0] = {
 		.start	= OMAP_CS2_PHYS + 0x300,
@@ -122,6 +129,9 @@ static struct resource voiceblue_smc91x_resources[] = {
 static struct platform_device voiceblue_smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &voiceblue_smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(voiceblue_smc91x_resources),
 	.resource	= voiceblue_smc91x_resources,
 };
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 436eed22801b..2ba9ab953731 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mach-omap1/clock.c
  *
- *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
  *  Modified to use omap shared clock framework by
@@ -22,16 +22,21 @@
 #include <asm/mach-types.h>
 #include <asm/clkdev.h>
 
-#include <mach/cpu.h>
-#include <mach/usb.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-
-static const struct clkops clkops_generic;
-static const struct clkops clkops_uart;
-static const struct clkops clkops_dspck;
+#include <plat/cpu.h>
+#include <plat/usb.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/clkdev_omap.h>
 
 #include "clock.h"
+#include "opp.h"
+
+__u32 arm_idlect1_mask;
+struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
+
+/*-------------------------------------------------------------------------
+ * Omap1 specific clock functions
+ *-------------------------------------------------------------------------*/
 
 static int clk_omap1_dummy_enable(struct clk *clk)
 {
@@ -42,132 +47,24 @@ static void clk_omap1_dummy_disable(struct clk *clk)
 {
 }
 
-static const struct clkops clkops_dummy = {
-	.enable = clk_omap1_dummy_enable,
-	.disable = clk_omap1_dummy_disable,
-};
-
-static struct clk dummy_ck = {
-	.name	= "dummy",
-	.ops	= &clkops_dummy,
-	.flags	= RATE_FIXED,
-};
-
-struct omap_clk {
-	u32		cpu;
-	struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck, cp) 		\
-	{				\
-		 .cpu = cp,		\
-		.lk = {			\
-			.dev_id = dev,	\
-			.con_id = con,	\
-			.clk = ck,	\
-		},			\
-	}
-
-#define CK_310	(1 << 0)
-#define CK_730	(1 << 1)
-#define CK_1510	(1 << 2)
-#define CK_16XX	(1 << 3)
-
-static struct omap_clk omap_clks[] = {
-	/* non-ULPD clocks */
-	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310),
-	/* CK_GEN1 clocks */
-	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
-	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
-	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"arm_gpio_ck",	&arm_gpio_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap_wdt",	"ick",		&armper_ck.clk,	CK_16XX),
-	CLK("omap_wdt", "ick",		&dummy_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"arminth_ck",	&arminth_ck1510, CK_1510 | CK_310),
-	CLK(NULL,	"arminth_ck",	&arminth_ck16xx, CK_16XX),
-	/* CK_GEN2 clocks */
-	CLK(NULL,	"dsp_ck",	&dsp_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspmmu_ck",	&dspmmu_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspper_ck",	&dspper_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspxor_ck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dsptim_ck",	&dsptim_ck,	CK_16XX | CK_1510 | CK_310),
-	/* CK_GEN3 clocks */
-	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_730),
-	CLK(NULL,	"tipb_ck",	&tipb_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck,	CK_16XX),
-	CLK(NULL,	"tc1_ck",	&tc1_ck,	CK_16XX),
-	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
-	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
-	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
-	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
-	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
-	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_730),
-	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk, CK_1510 | CK_310),
-	/* ULPD clocks */
-	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk, CK_16XX),
-	CLK(NULL,	"uart2_ck",	&uart2_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"uart3_ck",	&uart3_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk, CK_16XX),
-	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
-	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX),
-	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
-	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"bclk",		&bclk_16xx,	CK_16XX),
-	CLK("mmci-omap.0", "fck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK("mmci-omap.0", "ick",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("mmci-omap.1", "fck",	&mmc2_ck,	CK_16XX),
-	CLK("mmci-omap.1", "ick",	&armper_ck.clk,	CK_16XX),
-	/* Virtual clocks */
-	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
-	CLK("i2c_omap.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310),
-	CLK("i2c_omap.1", "ick",	&i2c_ick,	CK_16XX),
-	CLK("i2c_omap.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap_uwire", "fck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
-	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk,	CK_16XX),
-	CLK("omap-mcbsp.2", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.3", "ick",	&dspper_ck,	CK_16XX),
-	CLK("omap-mcbsp.3", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.1", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.2", "fck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.3", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+const struct clkops clkops_dummy = {
+	.enable		= clk_omap1_dummy_enable,
+	.disable	= clk_omap1_dummy_disable,
 };
 
-static int omap1_clk_enable_generic(struct clk * clk);
-static int omap1_clk_enable(struct clk *clk);
-static void omap1_clk_disable_generic(struct clk * clk);
-static void omap1_clk_disable(struct clk *clk);
-
-__u32 arm_idlect1_mask;
-
-/*-------------------------------------------------------------------------
- * Omap1 specific clock functions
- *-------------------------------------------------------------------------*/
-
-static unsigned long omap1_watchdog_recalc(struct clk *clk)
+/* XXX can be replaced with a fixed_divisor_recalc */
+unsigned long omap1_watchdog_recalc(struct clk *clk)
 {
 	return clk->parent->rate / 14;
 }
 
-static unsigned long omap1_uart_recalc(struct clk *clk)
+unsigned long omap1_uart_recalc(struct clk *clk)
 {
 	unsigned int val = __raw_readl(clk->enable_reg);
 	return val & clk->enable_bit ? 48000000 : 12000000;
 }
 
-static unsigned long omap1_sossi_recalc(struct clk *clk)
+unsigned long omap1_sossi_recalc(struct clk *clk)
 {
 	u32 div = omap_readl(MOD_CONF_CTRL_1);
 
@@ -177,64 +74,6 @@ static unsigned long omap1_sossi_recalc(struct clk *clk)
 	return clk->parent->rate / div;
 }
 
-static int omap1_clk_enable_dsp_domain(struct clk *clk)
-{
-	int retval;
-
-	retval = omap1_clk_enable(&api_ck.clk);
-	if (!retval) {
-		retval = omap1_clk_enable_generic(clk);
-		omap1_clk_disable(&api_ck.clk);
-	}
-
-	return retval;
-}
-
-static void omap1_clk_disable_dsp_domain(struct clk *clk)
-{
-	if (omap1_clk_enable(&api_ck.clk) == 0) {
-		omap1_clk_disable_generic(clk);
-		omap1_clk_disable(&api_ck.clk);
-	}
-}
-
-static const struct clkops clkops_dspck = {
-	.enable		= &omap1_clk_enable_dsp_domain,
-	.disable	= &omap1_clk_disable_dsp_domain,
-};
-
-static int omap1_clk_enable_uart_functional(struct clk *clk)
-{
-	int ret;
-	struct uart_clk *uclk;
-
-	ret = omap1_clk_enable_generic(clk);
-	if (ret == 0) {
-		/* Set smart idle acknowledgement mode */
-		uclk = (struct uart_clk *)clk;
-		omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8,
-			    uclk->sysc_addr);
-	}
-
-	return ret;
-}
-
-static void omap1_clk_disable_uart_functional(struct clk *clk)
-{
-	struct uart_clk *uclk;
-
-	/* Set force idle acknowledgement mode */
-	uclk = (struct uart_clk *)clk;
-	omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr);
-
-	omap1_clk_disable_generic(clk);
-}
-
-static const struct clkops clkops_uart = {
-	.enable		= &omap1_clk_enable_uart_functional,
-	.disable	= &omap1_clk_disable_uart_functional,
-};
-
 static void omap1_clk_allow_idle(struct clk *clk)
 {
 	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
@@ -342,7 +181,7 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 	return dsor_exp;
 }
 
-static unsigned long omap1_ckctl_recalc(struct clk *clk)
+unsigned long omap1_ckctl_recalc(struct clk *clk)
 {
 	/* Calculate divisor encoded as 2-bit exponent */
 	int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
@@ -350,7 +189,7 @@ static unsigned long omap1_ckctl_recalc(struct clk *clk)
 	return clk->parent->rate / dsor;
 }
 
-static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
+unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
 {
 	int dsor;
 
@@ -361,28 +200,29 @@ static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
 	 * Note that DSP_CKCTL virt addr = phys addr, so
 	 * we must use __raw_readw() instead of omap_readw().
 	 */
-	omap1_clk_enable(&api_ck.clk);
+	omap1_clk_enable(api_ck_p);
 	dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
-	omap1_clk_disable(&api_ck.clk);
+	omap1_clk_disable(api_ck_p);
 
 	return clk->parent->rate / dsor;
 }
 
 /* MPU virtual clock functions */
-static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
+int omap1_select_table_rate(struct clk *clk, unsigned long rate)
 {
 	/* Find the highest supported frequency <= rate and switch to it */
 	struct mpu_rate * ptr;
+	unsigned long dpll1_rate, ref_rate;
 
-	if (clk != &virtual_ck_mpu)
-		return -EINVAL;
+	dpll1_rate = clk_get_rate(ck_dpll1_p);
+	ref_rate = clk_get_rate(ck_ref_p);
 
-	for (ptr = rate_table; ptr->rate; ptr++) {
-		if (ptr->xtal != ck_ref.rate)
+	for (ptr = omap1_rate_table; ptr->rate; ptr++) {
+		if (ptr->xtal != ref_rate)
 			continue;
 
 		/* DPLL1 cannot be reprogrammed without risking system crash */
-		if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate)
+		if (likely(dpll1_rate != 0) && ptr->pll_rate != dpll1_rate)
 			continue;
 
 		/* Can check only after xtal frequency check */
@@ -398,16 +238,18 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
 	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
 	 * (on 730, bit 13 must always be 1)
 	 */
-	if (cpu_is_omap730())
+	if (cpu_is_omap7xx())
 		omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
 	else
 		omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
 
-	ck_dpll1.rate = ptr->pll_rate;
+	/* XXX Do we need to recalculate the tree below DPLL1 at this point? */
+	ck_dpll1_p->rate = ptr->pll_rate;
+
 	return 0;
 }
 
-static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
+int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
 {
 	int dsor_exp;
 	u16 regval;
@@ -427,7 +269,7 @@ static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
 {
 	int dsor_exp = calc_dsor_exp(clk, rate);
 	if (dsor_exp < 0)
@@ -437,7 +279,7 @@ static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
 	return clk->parent->rate / (1 << dsor_exp);
 }
 
-static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
 {
 	int dsor_exp;
 	u16 regval;
@@ -457,19 +299,19 @@ static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate)
+long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
 {
 	/* Find the highest supported frequency <= rate */
 	struct mpu_rate * ptr;
-	long  highest_rate;
+	long highest_rate;
+	unsigned long ref_rate;
 
-	if (clk != &virtual_ck_mpu)
-		return -EINVAL;
+	ref_rate = clk_get_rate(ck_ref_p);
 
 	highest_rate = -EINVAL;
 
-	for (ptr = rate_table; ptr->rate; ptr++) {
-		if (ptr->xtal != ck_ref.rate)
+	for (ptr = omap1_rate_table; ptr->rate; ptr++) {
+		if (ptr->xtal != ref_rate)
 			continue;
 
 		highest_rate = ptr->rate;
@@ -504,8 +346,8 @@ static unsigned calc_ext_dsor(unsigned long rate)
 	return dsor;
 }
 
-/* Only needed on 1510 */
-static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
+/* XXX Only needed on 1510 */
+int omap1_set_uart_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned int val;
 
@@ -523,7 +365,7 @@ static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
 }
 
 /* External clock (MCLK & BCLK) functions */
-static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
+int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned dsor;
 	__u16 ratio_bits;
@@ -541,7 +383,7 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
 	return 0;
 }
 
-static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
+int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
 {
 	u32 l;
 	int div;
@@ -564,12 +406,12 @@ static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate)
+long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate)
 {
 	return 96000000 / calc_ext_dsor(rate);
 }
 
-static void omap1_init_ext_clk(struct clk * clk)
+void omap1_init_ext_clk(struct clk *clk)
 {
 	unsigned dsor;
 	__u16 ratio_bits;
@@ -587,7 +429,7 @@ static void omap1_init_ext_clk(struct clk * clk)
 	clk-> rate = 96000000 / dsor;
 }
 
-static int omap1_clk_enable(struct clk *clk)
+int omap1_clk_enable(struct clk *clk)
 {
 	int ret = 0;
 
@@ -615,7 +457,7 @@ err:
 	return ret;
 }
 
-static void omap1_clk_disable(struct clk *clk)
+void omap1_clk_disable(struct clk *clk)
 {
 	if (clk->usecount > 0 && !(--clk->usecount)) {
 		clk->ops->disable(clk);
@@ -670,12 +512,70 @@ static void omap1_clk_disable_generic(struct clk *clk)
 	}
 }
 
-static const struct clkops clkops_generic = {
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
+const struct clkops clkops_generic = {
+	.enable		= omap1_clk_enable_generic,
+	.disable	= omap1_clk_disable_generic,
+};
+
+static int omap1_clk_enable_dsp_domain(struct clk *clk)
+{
+	int retval;
+
+	retval = omap1_clk_enable(api_ck_p);
+	if (!retval) {
+		retval = omap1_clk_enable_generic(clk);
+		omap1_clk_disable(api_ck_p);
+	}
+
+	return retval;
+}
+
+static void omap1_clk_disable_dsp_domain(struct clk *clk)
+{
+	if (omap1_clk_enable(api_ck_p) == 0) {
+		omap1_clk_disable_generic(clk);
+		omap1_clk_disable(api_ck_p);
+	}
+}
+
+const struct clkops clkops_dspck = {
+	.enable		= omap1_clk_enable_dsp_domain,
+	.disable	= omap1_clk_disable_dsp_domain,
+};
+
+static int omap1_clk_enable_uart_functional(struct clk *clk)
+{
+	int ret;
+	struct uart_clk *uclk;
+
+	ret = omap1_clk_enable_generic(clk);
+	if (ret == 0) {
+		/* Set smart idle acknowledgement mode */
+		uclk = (struct uart_clk *)clk;
+		omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8,
+			    uclk->sysc_addr);
+	}
+
+	return ret;
+}
+
+static void omap1_clk_disable_uart_functional(struct clk *clk)
+{
+	struct uart_clk *uclk;
+
+	/* Set force idle acknowledgement mode */
+	uclk = (struct uart_clk *)clk;
+	omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr);
+
+	omap1_clk_disable_generic(clk);
+}
+
+const struct clkops clkops_uart = {
+	.enable		= omap1_clk_enable_uart_functional,
+	.disable	= omap1_clk_disable_uart_functional,
 };
 
-static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
+long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 {
 	if (clk->flags & RATE_FIXED)
 		return clk->rate;
@@ -686,7 +586,7 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 	return clk->rate;
 }
 
-static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
+int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	int  ret = -EINVAL;
 
@@ -701,7 +601,7 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 
-static void __init omap1_clk_disable_unused(struct clk *clk)
+void __init omap1_clk_disable_unused(struct clk *clk)
 {
 	__u32 regval32;
 
@@ -722,184 +622,9 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
 	if ((regval32 & (1 << clk->enable_bit)) == 0)
 		return;
 
-	/* FIXME: This clock seems to be necessary but no-one
-	 * has asked for its activation. */
-	if (clk == &tc2_ck		/* FIX: pm.c (SRAM), CCP, Camera */
-	    || clk == &ck_dpll1out.clk	/* FIX: SoSSI, SSR */
-	    || clk == &arm_gpio_ck	/* FIX: GPIO code for 1510 */
-		) {
-		printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
-		       clk->name);
-		return;
-	}
-
 	printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
 	clk->ops->disable(clk);
 	printk(" done\n");
 }
 
-#else
-#define omap1_clk_disable_unused	NULL
-#endif
-
-static struct clk_functions omap1_clk_functions = {
-	.clk_enable		= omap1_clk_enable,
-	.clk_disable		= omap1_clk_disable,
-	.clk_round_rate		= omap1_clk_round_rate,
-	.clk_set_rate		= omap1_clk_set_rate,
-	.clk_disable_unused	= omap1_clk_disable_unused,
-};
-
-int __init omap1_clk_init(void)
-{
-	struct omap_clk *c;
-	const struct omap_clock_config *info;
-	int crystal_type = 0; /* Default 12 MHz */
-	u32 reg, cpu_mask;
-
-#ifdef CONFIG_DEBUG_LL
-	/* Resets some clocks that may be left on from bootloader,
-	 * but leaves serial clocks on.
- 	 */
-	omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
-#endif
-
-	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
-	reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
-	omap_writew(reg, SOFT_REQ_REG);
-	if (!cpu_is_omap15xx())
-		omap_writew(0, SOFT_REQ_REG2);
-
-	clk_init(&omap1_clk_functions);
-
-	/* By default all idlect1 clocks are allowed to idle */
-	arm_idlect1_mask = ~0;
-
-	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		clk_preinit(c->lk.clk);
-
-	cpu_mask = 0;
-	if (cpu_is_omap16xx())
-		cpu_mask |= CK_16XX;
-	if (cpu_is_omap1510())
-		cpu_mask |= CK_1510;
-	if (cpu_is_omap730())
-		cpu_mask |= CK_730;
-	if (cpu_is_omap310())
-		cpu_mask |= CK_310;
-
-	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		if (c->cpu & cpu_mask) {
-			clkdev_add(&c->lk);
-			clk_register(c->lk.clk);
-		}
-
-	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
-	if (info != NULL) {
-		if (!cpu_is_omap15xx())
-			crystal_type = info->system_clock_type;
-	}
-
-#if defined(CONFIG_ARCH_OMAP730)
-	ck_ref.rate = 13000000;
-#elif defined(CONFIG_ARCH_OMAP16XX)
-	if (crystal_type == 2)
-		ck_ref.rate = 19200000;
-#endif
-
-	printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
-	       omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
-	       omap_readw(ARM_CKCTL));
-
-	/* We want to be in syncronous scalable mode */
-	omap_writew(0x1000, ARM_SYSST);
-
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
-	/* Use values set by bootloader. Determine PLL rate and recalculate
-	 * dependent clocks as if kernel had changed PLL or divisors.
-	 */
-	{
-		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
-
-		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
-		if (pll_ctl_val & 0x10) {
-			/* PLL enabled, apply multiplier and divisor */
-			if (pll_ctl_val & 0xf80)
-				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
-			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
-		} else {
-			/* PLL disabled, apply bypass divisor */
-			switch (pll_ctl_val & 0xc) {
-			case 0:
-				break;
-			case 0x4:
-				ck_dpll1.rate /= 2;
-				break;
-			default:
-				ck_dpll1.rate /= 4;
-				break;
-			}
-		}
-	}
-#else
-	/* Find the highest supported frequency and enable it */
-	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
-		printk(KERN_ERR "System frequencies not set. Check your config.\n");
-		/* Guess sane values (60MHz) */
-		omap_writew(0x2290, DPLL_CTL);
-		omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
-		ck_dpll1.rate = 60000000;
-	}
 #endif
-	propagate_rate(&ck_dpll1);
-	/* Cache rates for clocks connected to ck_ref (not dpll1) */
-	propagate_rate(&ck_ref);
-	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
-		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
-#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
-	/* Select slicer output as OMAP input clock */
-	omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
-#endif
-
-	/* Amstrad Delta wants BCLK high when inactive */
-	if (machine_is_ams_delta())
-		omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
-				(1 << SDW_MCLK_INV_BIT),
-				ULPD_CLOCK_CTRL);
-
-	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
-	/* (on 730, bit 13 must not be cleared) */
-	if (cpu_is_omap730())
-		omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
-	else
-		omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
-
-	/* Put DSP/MPUI into reset until needed */
-	omap_writew(0, ARM_RSTCT1);
-	omap_writew(1, ARM_RSTCT2);
-	omap_writew(0x400, ARM_IDLECT1);
-
-	/*
-	 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
-	 * of the ARM_IDLECT2 register must be set to zero. The power-on
-	 * default value of this bit is one.
-	 */
-	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable(&armper_ck.clk);
-	clk_enable(&armxor_ck.clk);
-	clk_enable(&armtim_ck.clk); /* This should be done by timer code */
-
-	if (cpu_is_omap15xx())
-		clk_enable(&arm_gpio_ck);
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 17f874271255..a4190afb8614 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mach-omap1/clock.h
  *
- *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
  *
@@ -13,30 +13,36 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H
 
-static unsigned long omap1_ckctl_recalc(struct clk *clk);
-static unsigned long omap1_watchdog_recalc(struct clk *clk);
-static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
-static unsigned long omap1_sossi_recalc(struct clk *clk);
-static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
-static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
-static int omap1_set_uart_rate(struct clk * clk, unsigned long rate);
-static unsigned long omap1_uart_recalc(struct clk *clk);
-static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate);
-static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate);
-static void omap1_init_ext_clk(struct clk * clk);
-static int omap1_select_table_rate(struct clk * clk, unsigned long rate);
-static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate);
-
-static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
-static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
-
-struct mpu_rate {
-	unsigned long		rate;
-	unsigned long		xtal;
-	unsigned long		pll_rate;
-	__u16			ckctl_val;
-	__u16			dpllctl_val;
-};
+#include <linux/clk.h>
+
+#include <plat/clock.h>
+
+extern int __init omap1_clk_init(void);
+extern int omap1_clk_enable(struct clk *clk);
+extern void omap1_clk_disable(struct clk *clk);
+extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
+extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_ckctl_recalc(struct clk *clk);
+extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_sossi_recalc(struct clk *clk);
+extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
+extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate);
+extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_uart_recalc(struct clk *clk);
+extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate);
+extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate);
+extern void omap1_init_ext_clk(struct clk *clk);
+extern int omap1_select_table_rate(struct clk *clk, unsigned long rate);
+extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate);
+extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
+extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_watchdog_recalc(struct clk *clk);
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+extern void __init omap1_clk_disable_unused(struct clk *clk);
+#else
+#define omap1_clk_disable_unused	NULL
+#endif
 
 struct uart_clk {
 	struct clk	clk;
@@ -96,574 +102,12 @@ struct arm_idlect1_clk {
 #define SOFT_REQ_REG		0xfffe0834
 #define SOFT_REQ_REG2		0xfffe0880
 
-/*-------------------------------------------------------------------------
- * Omap1 MPU rate table
- *-------------------------------------------------------------------------*/
-static struct mpu_rate rate_table[] = {
-	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
-	 * NOTE: Comment order here is different from bits in CKCTL value:
-	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
-	 */
-#if defined(CONFIG_OMAP_ARM_216MHZ)
-	{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_195MHZ)
-	{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_192MHZ)
-	{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
-	{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
-	{  96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
-	{  48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
-	{  24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_182MHZ)
-	{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_168MHZ)
-	{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_150MHZ)
-	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_120MHZ)
-	{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_96MHZ)
-	{  96000000, 12000000,  96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_60MHZ)
-	{  60000000, 12000000,  60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_30MHZ)
-	{  30000000, 12000000,  60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
-#endif
-	{ 0, 0, 0, 0, 0 },
-};
-
-/*-------------------------------------------------------------------------
- * Omap1 clocks
- *-------------------------------------------------------------------------*/
-
-static struct clk ck_ref = {
-	.name		= "ck_ref",
-	.ops		= &clkops_null,
-	.rate		= 12000000,
-};
-
-static struct clk ck_dpll1 = {
-	.name		= "ck_dpll1",
-	.ops		= &clkops_null,
-	.parent		= &ck_ref,
-};
-
-static struct arm_idlect1_clk ck_dpll1out = {
-	.clk = {
-		.name		= "ck_dpll1out",
-		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_CKOUT_ARM,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 12,
-};
-
-static struct clk sossi_ck = {
-	.name		= "ck_sossi",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1out.clk,
-	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
-	.enable_bit	= 16,
-	.recalc		= &omap1_sossi_recalc,
-	.set_rate	= &omap1_set_sossi_rate,
-};
-
-static struct clk arm_ck = {
-	.name		= "arm_ck",
-	.ops		= &clkops_null,
-	.parent		= &ck_dpll1,
-	.rate_offset	= CKCTL_ARMDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct arm_idlect1_clk armper_ck = {
-	.clk = {
-		.name		= "armper_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_PERCK,
-		.rate_offset	= CKCTL_PERDIV_OFFSET,
-		.recalc		= &omap1_ckctl_recalc,
-		.round_rate	= omap1_clk_round_rate_ckctl_arm,
-		.set_rate	= omap1_clk_set_rate_ckctl_arm,
-	},
-	.idlect_shift	= 2,
-};
-
-static struct clk arm_gpio_ck = {
-	.name		= "arm_gpio_ck",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-	.enable_bit	= EN_GPIOCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct arm_idlect1_clk armxor_ck = {
-	.clk = {
-		.name		= "armxor_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_XORPCK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 1,
-};
-
-static struct arm_idlect1_clk armtim_ck = {
-	.clk = {
-		.name		= "armtim_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_TIMCK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 9,
-};
-
-static struct arm_idlect1_clk armwdt_ck = {
-	.clk = {
-		.name		= "armwdt_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_WDTCK,
-		.recalc		= &omap1_watchdog_recalc,
-	},
-	.idlect_shift	= 0,
-};
-
-static struct clk arminth_ck16xx = {
-	.name		= "arminth_ck",
-	.ops		= &clkops_null,
-	.parent		= &arm_ck,
-	.recalc		= &followparent_recalc,
-	/* Note: On 16xx the frequency can be divided by 2 by programming
-	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
-	 *
-	 * 1510 version is in TC clocks.
-	 */
-};
-
-static struct clk dsp_ck = {
-	.name		= "dsp_ck",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_CKCTL),
-	.enable_bit	= EN_DSPCK,
-	.rate_offset	= CKCTL_DSPDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct clk dspmmu_ck = {
-	.name		= "dspmmu_ck",
-	.ops		= &clkops_null,
-	.parent		= &ck_dpll1,
-	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct clk dspper_ck = {
-	.name		= "dspper_ck",
-	.ops		= &clkops_dspck,
-	.parent		= &ck_dpll1,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_PERCK,
-	.rate_offset	= CKCTL_PERDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc_dsp_domain,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= &omap1_clk_set_rate_dsp_domain,
-};
-
-static struct clk dspxor_ck = {
-	.name		= "dspxor_ck",
-	.ops		= &clkops_dspck,
-	.parent		= &ck_ref,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_XORPCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dsptim_ck = {
-	.name		= "dsptim_ck",
-	.ops		= &clkops_dspck,
-	.parent		= &ck_ref,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_DSPTIMCK,
-	.recalc		= &followparent_recalc,
-};
-
-/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
-static struct arm_idlect1_clk tc_ck = {
-	.clk = {
-		.name		= "tc_ck",
-		.ops		= &clkops_null,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.rate_offset	= CKCTL_TCDIV_OFFSET,
-		.recalc		= &omap1_ckctl_recalc,
-		.round_rate	= omap1_clk_round_rate_ckctl_arm,
-		.set_rate	= omap1_clk_set_rate_ckctl_arm,
-	},
-	.idlect_shift	= 6,
-};
-
-static struct clk arminth_ck1510 = {
-	.name		= "arminth_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-	/* Note: On 1510 the frequency follows TC_CK
-	 *
-	 * 16xx version is in MPU clocks.
-	 */
-};
-
-static struct clk tipb_ck = {
-	/* No-idle controlled by "tc_ck" */
-	.name		= "tipb_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk l3_ocpi_ck = {
-	/* No-idle controlled by "tc_ck" */
-	.name		= "l3_ocpi_ck",
-	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
-	.enable_bit	= EN_OCPI_CK,
-	.recalc		= &followparent_recalc,
-};
+extern __u32 arm_idlect1_mask;
+extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
-static struct clk tc1_ck = {
-	.name		= "tc1_ck",
-	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
-	.enable_bit	= EN_TC1_CK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk tc2_ck = {
-	.name		= "tc2_ck",
-	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
-	.enable_bit	= EN_TC2_CK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dma_ck = {
-	/* No-idle controlled by "tc_ck" */
-	.name		= "dma_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dma_lcdfree_ck = {
-	.name		= "dma_lcdfree_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct arm_idlect1_clk api_ck = {
-	.clk = {
-		.name		= "api_ck",
-		.ops		= &clkops_generic,
-		.parent		= &tc_ck.clk,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_APICK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 8,
-};
-
-static struct arm_idlect1_clk lb_ck = {
-	.clk = {
-		.name		= "lb_ck",
-		.ops		= &clkops_generic,
-		.parent		= &tc_ck.clk,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_LBCK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 4,
-};
-
-static struct clk rhea1_ck = {
-	.name		= "rhea1_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rhea2_ck = {
-	.name		= "rhea2_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk lcd_ck_16xx = {
-	.name		= "lcd_ck",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-	.enable_bit	= EN_LCDCK,
-	.rate_offset	= CKCTL_LCDDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct arm_idlect1_clk lcd_ck_1510 = {
-	.clk = {
-		.name		= "lcd_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_LCDCK,
-		.rate_offset	= CKCTL_LCDDIV_OFFSET,
-		.recalc		= &omap1_ckctl_recalc,
-		.round_rate	= omap1_clk_round_rate_ckctl_arm,
-		.set_rate	= omap1_clk_set_rate_ckctl_arm,
-	},
-	.idlect_shift	= 3,
-};
-
-static struct clk uart1_1510 = {
-	.name		= "uart1_ck",
-	.ops		= &clkops_null,
-	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &omap1_set_uart_rate,
-	.recalc		= &omap1_uart_recalc,
-};
-
-static struct uart_clk uart1_16xx = {
-	.clk	= {
-		.name		= "uart1_ck",
-		.ops		= &clkops_uart,
-		/* Direct from ULPD, no real parent */
-		.parent		= &armper_ck.clk,
-		.rate		= 48000000,
-		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
-				  CLOCK_NO_IDLE_PARENT,
-		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= 29,
-	},
-	.sysc_addr	= 0xfffb0054,
-};
-
-static struct clk uart2_ck = {
-	.name		= "uart2_ck",
-	.ops		= &clkops_null,
-	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &omap1_set_uart_rate,
-	.recalc		= &omap1_uart_recalc,
-};
-
-static struct clk uart3_1510 = {
-	.name		= "uart3_ck",
-	.ops		= &clkops_null,
-	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &omap1_set_uart_rate,
-	.recalc		= &omap1_uart_recalc,
-};
-
-static struct uart_clk uart3_16xx = {
-	.clk	= {
-		.name		= "uart3_ck",
-		.ops		= &clkops_uart,
-		/* Direct from ULPD, no real parent */
-		.parent		= &armper_ck.clk,
-		.rate		= 48000000,
-		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
-				  CLOCK_NO_IDLE_PARENT,
-		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= 31,
-	},
-	.sysc_addr	= 0xfffb9854,
-};
-
-static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
-	.name		= "usb_clko",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 6000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
-	.enable_bit	= USB_MCLK_EN_BIT,
-};
-
-static struct clk usb_hhc_ck1510 = {
-	.name		= "usb_hhc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= USB_HOST_HHC_UHOST_EN,
-};
-
-static struct clk usb_hhc_ck16xx = {
-	.name		= "usb_hhc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
-	.enable_bit	= 8 /* UHOST_EN */,
-};
-
-static struct clk usb_dc_ck = {
-	.name		= "usb_dc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.flags		= RATE_FIXED,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 4,
-};
-
-static struct clk mclk_1510 = {
-	.name		= "mclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.rate		= 12000000,
-	.flags		= RATE_FIXED,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 6,
-};
-
-static struct clk mclk_16xx = {
-	.name		= "mclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.enable_reg	= OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
-	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
-	.set_rate	= &omap1_set_ext_clk_rate,
-	.round_rate	= &omap1_round_ext_clk_rate,
-	.init		= &omap1_init_ext_clk,
-};
-
-static struct clk bclk_1510 = {
-	.name		= "bclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.rate		= 12000000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk bclk_16xx = {
-	.name		= "bclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.enable_reg	= OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
-	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
-	.set_rate	= &omap1_set_ext_clk_rate,
-	.round_rate	= &omap1_round_ext_clk_rate,
-	.init		= &omap1_init_ext_clk,
-};
-
-static struct clk mmc1_ck = {
-	.name		= "mmc_ck",
-	.ops		= &clkops_generic,
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
-	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 23,
-};
-
-static struct clk mmc2_ck = {
-	.name		= "mmc_ck",
-	.id		= 1,
-	.ops		= &clkops_generic,
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
-	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 20,
-};
-
-static struct clk virtual_ck_mpu = {
-	.name		= "mpu",
-	.ops		= &clkops_null,
-	.parent		= &arm_ck, /* Is smarter alias for */
-	.recalc		= &followparent_recalc,
-	.set_rate	= &omap1_select_table_rate,
-	.round_rate	= &omap1_round_to_table_rate,
-};
-
-/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
-remains active during MPU idle whenever this is enabled */
-static struct clk i2c_fck = {
-	.name		= "i2c_fck",
-	.id		= 1,
-	.ops		= &clkops_null,
-	.flags		= CLOCK_NO_IDLE_PARENT,
-	.parent		= &armxor_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c_ick = {
-	.name		= "i2c_ick",
-	.id		= 1,
-	.ops		= &clkops_null,
-	.flags		= CLOCK_NO_IDLE_PARENT,
-	.parent		= &armper_ck.clk,
-	.recalc		= &followparent_recalc,
-};
+extern const struct clkops clkops_dspck;
+extern const struct clkops clkops_dummy;
+extern const struct clkops clkops_uart;
+extern const struct clkops clkops_generic;
 
 #endif
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
new file mode 100644
index 000000000000..ab995a9c606c
--- /dev/null
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -0,0 +1,843 @@
+/*
+ *  linux/arch/arm/mach-omap1/clock_data.c
+ *
+ *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>  /* for machine_is_* */
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/clkdev_omap.h>
+#include <plat/usb.h>   /* for OTG_BASE */
+
+#include "clock.h"
+
+/*------------------------------------------------------------------------
+ * Omap1 clocks
+ *-------------------------------------------------------------------------*/
+
+/* XXX is this necessary? */
+static struct clk dummy_ck = {
+	.name	= "dummy",
+	.ops	= &clkops_dummy,
+	.flags	= RATE_FIXED,
+};
+
+static struct clk ck_ref = {
+	.name		= "ck_ref",
+	.ops		= &clkops_null,
+	.rate		= 12000000,
+};
+
+static struct clk ck_dpll1 = {
+	.name		= "ck_dpll1",
+	.ops		= &clkops_null,
+	.parent		= &ck_ref,
+};
+
+/*
+ * FIXME: This clock seems to be necessary but no-one has asked for its
+ * activation.  [ FIX: SoSSI, SSR ]
+ */
+static struct arm_idlect1_clk ck_dpll1out = {
+	.clk = {
+		.name		= "ck_dpll1out",
+		.ops		= &clkops_generic,
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT |
+				  ENABLE_ON_INIT,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_CKOUT_ARM,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= 12,
+};
+
+static struct clk sossi_ck = {
+	.name		= "ck_sossi",
+	.ops		= &clkops_generic,
+	.parent		= &ck_dpll1out.clk,
+	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
+	.enable_bit	= 16,
+	.recalc		= &omap1_sossi_recalc,
+	.set_rate	= &omap1_set_sossi_rate,
+};
+
+static struct clk arm_ck = {
+	.name		= "arm_ck",
+	.ops		= &clkops_null,
+	.parent		= &ck_dpll1,
+	.rate_offset	= CKCTL_ARMDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
+};
+
+static struct arm_idlect1_clk armper_ck = {
+	.clk = {
+		.name		= "armper_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_PERCK,
+		.rate_offset	= CKCTL_PERDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
+	},
+	.idlect_shift	= 2,
+};
+
+/*
+ * FIXME: This clock seems to be necessary but no-one has asked for its
+ * activation.  [ GPIO code for 1510 ]
+ */
+static struct clk arm_gpio_ck = {
+	.name		= "arm_gpio_ck",
+	.ops		= &clkops_generic,
+	.parent		= &ck_dpll1,
+	.flags		= ENABLE_ON_INIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+	.enable_bit	= EN_GPIOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct arm_idlect1_clk armxor_ck = {
+	.clk = {
+		.name		= "armxor_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_XORPCK,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= 1,
+};
+
+static struct arm_idlect1_clk armtim_ck = {
+	.clk = {
+		.name		= "armtim_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_TIMCK,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= 9,
+};
+
+static struct arm_idlect1_clk armwdt_ck = {
+	.clk = {
+		.name		= "armwdt_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_WDTCK,
+		.recalc		= &omap1_watchdog_recalc,
+	},
+	.idlect_shift	= 0,
+};
+
+static struct clk arminth_ck16xx = {
+	.name		= "arminth_ck",
+	.ops		= &clkops_null,
+	.parent		= &arm_ck,
+	.recalc		= &followparent_recalc,
+	/* Note: On 16xx the frequency can be divided by 2 by programming
+	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
+	 *
+	 * 1510 version is in TC clocks.
+	 */
+};
+
+static struct clk dsp_ck = {
+	.name		= "dsp_ck",
+	.ops		= &clkops_generic,
+	.parent		= &ck_dpll1,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_CKCTL),
+	.enable_bit	= EN_DSPCK,
+	.rate_offset	= CKCTL_DSPDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
+};
+
+static struct clk dspmmu_ck = {
+	.name		= "dspmmu_ck",
+	.ops		= &clkops_null,
+	.parent		= &ck_dpll1,
+	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
+};
+
+static struct clk dspper_ck = {
+	.name		= "dspper_ck",
+	.ops		= &clkops_dspck,
+	.parent		= &ck_dpll1,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_PERCK,
+	.rate_offset	= CKCTL_PERDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc_dsp_domain,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= &omap1_clk_set_rate_dsp_domain,
+};
+
+static struct clk dspxor_ck = {
+	.name		= "dspxor_ck",
+	.ops		= &clkops_dspck,
+	.parent		= &ck_ref,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_XORPCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dsptim_ck = {
+	.name		= "dsptim_ck",
+	.ops		= &clkops_dspck,
+	.parent		= &ck_ref,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_DSPTIMCK,
+	.recalc		= &followparent_recalc,
+};
+
+/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
+static struct arm_idlect1_clk tc_ck = {
+	.clk = {
+		.name		= "tc_ck",
+		.ops		= &clkops_null,
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.rate_offset	= CKCTL_TCDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
+	},
+	.idlect_shift	= 6,
+};
+
+static struct clk arminth_ck1510 = {
+	.name		= "arminth_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+	/* Note: On 1510 the frequency follows TC_CK
+	 *
+	 * 16xx version is in MPU clocks.
+	 */
+};
+
+static struct clk tipb_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "tipb_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk l3_ocpi_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "l3_ocpi_ck",
+	.ops		= &clkops_generic,
+	.parent		= &tc_ck.clk,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
+	.enable_bit	= EN_OCPI_CK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk tc1_ck = {
+	.name		= "tc1_ck",
+	.ops		= &clkops_generic,
+	.parent		= &tc_ck.clk,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
+	.enable_bit	= EN_TC1_CK,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * FIXME: This clock seems to be necessary but no-one has asked for its
+ * activation.  [ pm.c (SRAM), CCP, Camera ]
+ */
+static struct clk tc2_ck = {
+	.name		= "tc2_ck",
+	.ops		= &clkops_generic,
+	.parent		= &tc_ck.clk,
+	.flags		= ENABLE_ON_INIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
+	.enable_bit	= EN_TC2_CK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dma_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "dma_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dma_lcdfree_ck = {
+	.name		= "dma_lcdfree_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct arm_idlect1_clk api_ck = {
+	.clk = {
+		.name		= "api_ck",
+		.ops		= &clkops_generic,
+		.parent		= &tc_ck.clk,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_APICK,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= 8,
+};
+
+static struct arm_idlect1_clk lb_ck = {
+	.clk = {
+		.name		= "lb_ck",
+		.ops		= &clkops_generic,
+		.parent		= &tc_ck.clk,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_LBCK,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= 4,
+};
+
+static struct clk rhea1_ck = {
+	.name		= "rhea1_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rhea2_ck = {
+	.name		= "rhea2_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk lcd_ck_16xx = {
+	.name		= "lcd_ck",
+	.ops		= &clkops_generic,
+	.parent		= &ck_dpll1,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+	.enable_bit	= EN_LCDCK,
+	.rate_offset	= CKCTL_LCDDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
+};
+
+static struct arm_idlect1_clk lcd_ck_1510 = {
+	.clk = {
+		.name		= "lcd_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_LCDCK,
+		.rate_offset	= CKCTL_LCDDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
+	},
+	.idlect_shift	= 3,
+};
+
+static struct clk uart1_1510 = {
+	.name		= "uart1_ck",
+	.ops		= &clkops_null,
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+};
+
+static struct uart_clk uart1_16xx = {
+	.clk	= {
+		.name		= "uart1_ck",
+		.ops		= &clkops_uart,
+		/* Direct from ULPD, no real parent */
+		.parent		= &armper_ck.clk,
+		.rate		= 48000000,
+		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
+				  CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+		.enable_bit	= 29,
+	},
+	.sysc_addr	= 0xfffb0054,
+};
+
+static struct clk uart2_ck = {
+	.name		= "uart2_ck",
+	.ops		= &clkops_null,
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+};
+
+static struct clk uart3_1510 = {
+	.name		= "uart3_ck",
+	.ops		= &clkops_null,
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+};
+
+static struct uart_clk uart3_16xx = {
+	.clk	= {
+		.name		= "uart3_ck",
+		.ops		= &clkops_uart,
+		/* Direct from ULPD, no real parent */
+		.parent		= &armper_ck.clk,
+		.rate		= 48000000,
+		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
+				  CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+		.enable_bit	= 31,
+	},
+	.sysc_addr	= 0xfffb9854,
+};
+
+static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
+	.name		= "usb_clko",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 6000000,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
+	.enable_bit	= USB_MCLK_EN_BIT,
+};
+
+static struct clk usb_hhc_ck1510 = {
+	.name		= "usb_hhc_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= USB_HOST_HHC_UHOST_EN,
+};
+
+static struct clk usb_hhc_ck16xx = {
+	.name		= "usb_hhc_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
+	.enable_bit	= 8 /* UHOST_EN */,
+};
+
+static struct clk usb_dc_ck = {
+	.name		= "usb_dc_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	.flags		= RATE_FIXED,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 4,
+};
+
+static struct clk usb_dc_ck7xx = {
+	.name		= "usb_dc_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	.flags		= RATE_FIXED,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 8,
+};
+
+static struct clk mclk_1510 = {
+	.name		= "mclk",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.rate		= 12000000,
+	.flags		= RATE_FIXED,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 6,
+};
+
+static struct clk mclk_16xx = {
+	.name		= "mclk",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.enable_reg	= OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
+	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
+	.set_rate	= &omap1_set_ext_clk_rate,
+	.round_rate	= &omap1_round_ext_clk_rate,
+	.init		= &omap1_init_ext_clk,
+};
+
+static struct clk bclk_1510 = {
+	.name		= "bclk",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.rate		= 12000000,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk bclk_16xx = {
+	.name		= "bclk",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.enable_reg	= OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
+	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
+	.set_rate	= &omap1_set_ext_clk_rate,
+	.round_rate	= &omap1_round_ext_clk_rate,
+	.init		= &omap1_init_ext_clk,
+};
+
+static struct clk mmc1_ck = {
+	.name		= "mmc_ck",
+	.ops		= &clkops_generic,
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= 23,
+};
+
+static struct clk mmc2_ck = {
+	.name		= "mmc_ck",
+	.id		= 1,
+	.ops		= &clkops_generic,
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= 20,
+};
+
+static struct clk mmc3_ck = {
+	.name		= "mmc_ck",
+	.id		= 2,
+	.ops		= &clkops_generic,
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 12,
+};
+
+static struct clk virtual_ck_mpu = {
+	.name		= "mpu",
+	.ops		= &clkops_null,
+	.parent		= &arm_ck, /* Is smarter alias for */
+	.recalc		= &followparent_recalc,
+	.set_rate	= &omap1_select_table_rate,
+	.round_rate	= &omap1_round_to_table_rate,
+};
+
+/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
+remains active during MPU idle whenever this is enabled */
+static struct clk i2c_fck = {
+	.name		= "i2c_fck",
+	.id		= 1,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_NO_IDLE_PARENT,
+	.parent		= &armxor_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c_ick = {
+	.name		= "i2c_ick",
+	.id		= 1,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_NO_IDLE_PARENT,
+	.parent		= &armper_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * clkdev integration
+ */
+
+static struct omap_clk omap_clks[] = {
+	/* non-ULPD clocks */
+	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310),
+	/* CK_GEN1 clocks */
+	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
+	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
+	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"arm_gpio_ck",	&arm_gpio_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"ick",		&armper_ck.clk,	CK_16XX),
+	CLK("omap_wdt", "ick",		&dummy_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck1510, CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck16xx, CK_16XX),
+	/* CK_GEN2 clocks */
+	CLK(NULL,	"dsp_ck",	&dsp_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspmmu_ck",	&dspmmu_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspper_ck",	&dspper_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspxor_ck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dsptim_ck",	&dsptim_ck,	CK_16XX | CK_1510 | CK_310),
+	/* CK_GEN3 clocks */
+	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"tipb_ck",	&tipb_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck,	CK_16XX | CK_7XX),
+	CLK(NULL,	"tc1_ck",	&tc1_ck,	CK_16XX),
+	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
+	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
+	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
+	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
+	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_7XX),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk, CK_1510 | CK_310),
+	/* ULPD clocks */
+	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk, CK_16XX),
+	CLK(NULL,	"uart2_ck",	&uart2_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"uart3_ck",	&uart3_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk, CK_16XX),
+	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck7xx,	CK_7XX),
+	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
+	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"bclk",		&bclk_16xx,	CK_16XX),
+	CLK("mmci-omap.0", "fck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK("mmci-omap.0", "fck",	&mmc3_ck,	CK_7XX),
+	CLK("mmci-omap.0", "ick",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK("mmci-omap.1", "fck",	&mmc2_ck,	CK_16XX),
+	CLK("mmci-omap.1", "ick",	&armper_ck.clk,	CK_16XX),
+	/* Virtual clocks */
+	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
+	CLK("i2c_omap.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK("i2c_omap.1", "ick",	&i2c_ick,	CK_16XX),
+	CLK("i2c_omap.1", "ick",	&dummy_ck,	CK_1510 | CK_310 | CK_7XX),
+	CLK("omap_uwire", "fck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
+	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk,	CK_16XX),
+	CLK("omap-mcbsp.2", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "ick",	&dspper_ck,	CK_16XX),
+	CLK("omap-mcbsp.3", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.1", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "fck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+};
+
+/*
+ * init
+ */
+
+static struct clk_functions omap1_clk_functions __initdata = {
+	.clk_enable		= omap1_clk_enable,
+	.clk_disable		= omap1_clk_disable,
+	.clk_round_rate		= omap1_clk_round_rate,
+	.clk_set_rate		= omap1_clk_set_rate,
+	.clk_disable_unused	= omap1_clk_disable_unused,
+};
+
+int __init omap1_clk_init(void)
+{
+	struct omap_clk *c;
+	const struct omap_clock_config *info;
+	int crystal_type = 0; /* Default 12 MHz */
+	u32 reg, cpu_mask;
+
+#ifdef CONFIG_DEBUG_LL
+	/*
+	 * Resets some clocks that may be left on from bootloader,
+	 * but leaves serial clocks on.
+	 */
+	omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+#endif
+
+	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
+	reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
+	omap_writew(reg, SOFT_REQ_REG);
+	if (!cpu_is_omap15xx())
+		omap_writew(0, SOFT_REQ_REG2);
+
+	clk_init(&omap1_clk_functions);
+
+	/* By default all idlect1 clocks are allowed to idle */
+	arm_idlect1_mask = ~0;
+
+	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+		clk_preinit(c->lk.clk);
+
+	cpu_mask = 0;
+	if (cpu_is_omap16xx())
+		cpu_mask |= CK_16XX;
+	if (cpu_is_omap1510())
+		cpu_mask |= CK_1510;
+	if (cpu_is_omap7xx())
+		cpu_mask |= CK_7XX;
+	if (cpu_is_omap310())
+		cpu_mask |= CK_310;
+
+	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+		if (c->cpu & cpu_mask) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
+		}
+
+	/* Pointers to these clocks are needed by code in clock.c */
+	api_ck_p = clk_get(NULL, "api_ck");
+	ck_dpll1_p = clk_get(NULL, "ck_dpll1");
+	ck_ref_p = clk_get(NULL, "ck_ref");
+
+	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
+	if (info != NULL) {
+		if (!cpu_is_omap15xx())
+			crystal_type = info->system_clock_type;
+	}
+
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	ck_ref.rate = 13000000;
+#elif defined(CONFIG_ARCH_OMAP16XX)
+	if (crystal_type == 2)
+		ck_ref.rate = 19200000;
+#endif
+
+	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: "
+		"0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
+		omap_readw(ARM_CKCTL));
+
+	/* We want to be in syncronous scalable mode */
+	omap_writew(0x1000, ARM_SYSST);
+
+#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
+	/* Use values set by bootloader. Determine PLL rate and recalculate
+	 * dependent clocks as if kernel had changed PLL or divisors.
+	 */
+	{
+		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
+
+		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
+		if (pll_ctl_val & 0x10) {
+			/* PLL enabled, apply multiplier and divisor */
+			if (pll_ctl_val & 0xf80)
+				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
+			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
+		} else {
+			/* PLL disabled, apply bypass divisor */
+			switch (pll_ctl_val & 0xc) {
+			case 0:
+				break;
+			case 0x4:
+				ck_dpll1.rate /= 2;
+				break;
+			default:
+				ck_dpll1.rate /= 4;
+				break;
+			}
+		}
+	}
+#else
+	/* Find the highest supported frequency and enable it */
+	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+		printk(KERN_ERR "System frequencies not set. Check your config.\n");
+		/* Guess sane values (60MHz) */
+		omap_writew(0x2290, DPLL_CTL);
+		omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
+		ck_dpll1.rate = 60000000;
+	}
+#endif
+	propagate_rate(&ck_dpll1);
+	/* Cache rates for clocks connected to ck_ref (not dpll1) */
+	propagate_rate(&ck_ref);
+	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
+		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+
+#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
+	/* Select slicer output as OMAP input clock */
+	omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
+#endif
+
+	/* Amstrad Delta wants BCLK high when inactive */
+	if (machine_is_ams_delta())
+		omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
+				(1 << SDW_MCLK_INV_BIT),
+				ULPD_CLOCK_CTRL);
+
+	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
+	/* (on 730, bit 13 must not be cleared) */
+	if (cpu_is_omap7xx())
+		omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
+	else
+		omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+
+	/* Put DSP/MPUI into reset until needed */
+	omap_writew(0, ARM_RSTCT1);
+	omap_writew(1, ARM_RSTCT2);
+	omap_writew(0x400, ARM_IDLECT1);
+
+	/*
+	 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
+	 * of the ARM_IDLECT2 register must be set to zero. The power-on
+	 * default value of this bit is one.
+	 */
+	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable(&armper_ck.clk);
+	clk_enable(&armxor_ck.clk);
+	clk_enable(&armtim_ck.clk); /* This should be done by timer code */
+
+	if (cpu_is_omap15xx())
+		clk_enable(&arm_gpio_ck);
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 06808434ea04..23ded2d49600 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -18,11 +18,11 @@
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/mux.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -108,15 +108,22 @@ static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			int controller_nr)
 {
 	if (controller_nr == 0) {
-		omap_cfg_reg(MMC_CMD);
-		omap_cfg_reg(MMC_CLK);
-		omap_cfg_reg(MMC_DAT0);
+		if (cpu_is_omap7xx()) {
+			omap_cfg_reg(MMC_7XX_CMD);
+			omap_cfg_reg(MMC_7XX_CLK);
+			omap_cfg_reg(MMC_7XX_DAT0);
+		} else {
+			omap_cfg_reg(MMC_CMD);
+			omap_cfg_reg(MMC_CLK);
+			omap_cfg_reg(MMC_DAT0);
+		}
+
 		if (cpu_is_omap1710()) {
 			omap_cfg_reg(M15_1710_MMC_CLKI);
 			omap_cfg_reg(P19_1710_MMC_CMDDIR);
 			omap_cfg_reg(P20_1710_MMC_DATDIR0);
 		}
-		if (mmc_controller->slots[0].wires == 4) {
+		if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
 			omap_cfg_reg(MMC_DAT1);
 			/* NOTE: DAT2 can be on W10 (here) or M15 */
 			if (!mmc_controller->slots[0].nomux)
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 4f2b8a7adb19..5cfce1636da0 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -27,7 +27,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
 
 static void fpga_mask_irq(unsigned int irq)
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
new file mode 100644
index 000000000000..1bf4735e27a6
--- /dev/null
+++ b/arch/arm/mach-omap1/i2c.c
@@ -0,0 +1,39 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <plat/i2c.h>
+#include <plat/mux.h>
+#include <plat/cpu.h>
+
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+			  struct i2c_board_info const *info,
+			  unsigned len)
+{
+	if (cpu_is_omap7xx()) {
+		omap_cfg_reg(I2C_7XX_SDA);
+		omap_cfg_reg(I2C_7XX_SCL);
+	} else {
+		omap_cfg_reg(I2C_SDA);
+		omap_cfg_reg(I2C_SCL);
+	}
+
+	return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
+}
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index e5dcdf764c91..a0e3560b39db 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 #define OMAP_DIE_ID_0		0xfffe1800
 #define OMAP_DIE_ID_1		0xfffe1804
diff --git a/arch/arm/mach-omap1/include/mach/clkdev.h b/arch/arm/mach-omap1/include/mach/clkdev.h
new file mode 100644
index 000000000000..ea8640e4603e
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/clkdev.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/clkdev.h
+ */
+
+#include <plat/clkdev.h>
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
new file mode 100644
index 000000000000..aedb746fc33c
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -0,0 +1,45 @@
+/* arch/arm/mach-omap1/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0xff000000	@ physical base address
+		movne	\rx, #0xfe000000	@ virtual base
+		orr	\rx, \rx, #0x00fb0000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		orr	\rx, \rx, #0x00009000	@ UART 3
+#endif
+#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
+		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		beq	1002f
+		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1001b
+1002:
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
new file mode 100644
index 000000000000..df9060edda28
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-omap1/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
+#include <asm/hardware/gic.h>
+
+#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \
+	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+#error "FIXME: OMAP7XX doesn't support multiple-OMAP"
+#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+#define INT_IH2_IRQ		INT_7XX_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP15XX)
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP16XX)
+#define INT_IH2_IRQ		INT_1610_IH2_IRQ
+#else
+#warning "IH2 IRQ defaulted"
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#endif
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
+		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
+		mov	\irqstat, #0xffffffff
+		bic	\tmp, \irqstat, \tmp
+		tst	\irqnr, \tmp
+		beq	1510f
+
+		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+		cmp	\irqnr, #0
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		cmpeq	\irqnr, #INT_IH2_IRQ
+		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		addeqs	\irqnr, \irqnr, #32
+1510:
+		.endm
+
diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h
new file mode 100644
index 000000000000..e737706a8fe1
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/gpio.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/gpio.h
+ */
+
+#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
new file mode 100644
index 000000000000..a3f6287b2007
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/hardware.h
+ */
+
+#include <plat/hardware.h>
diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h
new file mode 100644
index 000000000000..57bdf74a3e64
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/io.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/io.h
+ */
+
+#include <plat/io.h>
diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h
new file mode 100644
index 000000000000..9292fdc1cb0b
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/irqs.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/irqs.h
+ */
+
+#include <plat/irqs.h>
diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/arch/arm/mach-omap1/include/mach/lcd_dma.h
new file mode 100644
index 000000000000..d7a457bbcb7f
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/lcd_dma.h
@@ -0,0 +1,78 @@
+/*
+ *  arch/arm/mach-omap1/include/mach/lcd_dma.h
+ *
+ * Extracted from arch/arm/plat-omap/include/plat/dma.h
+ *  Copyright (C) 2003 Nokia Corporation
+ *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __MACH_OMAP1_LCD_DMA_H__
+#define __MACH_OMAP1_LCD_DMA_H__
+
+/* Hardware registers for LCD DMA */
+#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
+
+/* LCD DMA block numbers */
+enum {
+	OMAP_LCD_DMA_B1_TOP,
+	OMAP_LCD_DMA_B1_BOTTOM,
+	OMAP_LCD_DMA_B2_TOP,
+	OMAP_LCD_DMA_B2_BOTTOM
+};
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+				void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+				int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+extern int omap_lcd_dma_running(void);
+
+#endif /* __MACH_OMAP1_LCD_DMA_H__ */
diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h
new file mode 100644
index 000000000000..89bd703adaf6
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/lcdc.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-omap1/include/mach/lcdc.h
+ *
+ * Extracted from drivers/video/omap/lcdc.c
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __MACH_LCDC_H__
+#define __MACH_LCDC_H__
+
+#define OMAP_LCDC_BASE			0xfffec000
+#define OMAP_LCDC_SIZE			256
+#define OMAP_LCDC_IRQ			INT_LCD_CTRL
+
+#define OMAP_LCDC_CONTROL		(OMAP_LCDC_BASE + 0x00)
+#define OMAP_LCDC_TIMING0		(OMAP_LCDC_BASE + 0x04)
+#define OMAP_LCDC_TIMING1		(OMAP_LCDC_BASE + 0x08)
+#define OMAP_LCDC_TIMING2		(OMAP_LCDC_BASE + 0x0c)
+#define OMAP_LCDC_STATUS		(OMAP_LCDC_BASE + 0x10)
+#define OMAP_LCDC_SUBPANEL		(OMAP_LCDC_BASE + 0x14)
+#define OMAP_LCDC_LINE_INT		(OMAP_LCDC_BASE + 0x18)
+#define OMAP_LCDC_DISPLAY_STATUS	(OMAP_LCDC_BASE + 0x1c)
+
+#define OMAP_LCDC_STAT_DONE		(1 << 0)
+#define OMAP_LCDC_STAT_VSYNC		(1 << 1)
+#define OMAP_LCDC_STAT_SYNC_LOST	(1 << 2)
+#define OMAP_LCDC_STAT_ABC		(1 << 3)
+#define OMAP_LCDC_STAT_LINE_INT		(1 << 4)
+#define OMAP_LCDC_STAT_FUF		(1 << 5)
+#define OMAP_LCDC_STAT_LOADED_PALETTE	(1 << 6)
+
+#define OMAP_LCDC_CTRL_LCD_EN		(1 << 0)
+#define OMAP_LCDC_CTRL_LCD_TFT		(1 << 7)
+#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL	(1 << 10)
+
+#define OMAP_LCDC_IRQ_VSYNC		(1 << 2)
+#define OMAP_LCDC_IRQ_DONE		(1 << 3)
+#define OMAP_LCDC_IRQ_LOADED_PALETTE	(1 << 4)
+#define OMAP_LCDC_IRQ_LINE_NIRQ		(1 << 5)
+#define OMAP_LCDC_IRQ_LINE		(1 << 6)
+#define OMAP_LCDC_IRQ_MASK		(((1 << 5) - 1) << 2)
+
+#endif /* __MACH_LCDC_H__ */
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
new file mode 100644
index 000000000000..e9b600c113ef
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/memory.h
+ */
+
+#include <plat/memory.h>
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/mach-omap1/include/mach/mtd-xip.h
index f82a8dcaad94..f82a8dcaad94 100644
--- a/arch/arm/plat-omap/include/mach/mtd-xip.h
+++ b/arch/arm/mach-omap1/include/mach/mtd-xip.h
diff --git a/arch/arm/mach-omap1/include/mach/smp.h b/arch/arm/mach-omap1/include/mach/smp.h
new file mode 100644
index 000000000000..80a371c06e59
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/smp.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/smp.h
+ */
+
+#include <plat/smp.h>
diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h
new file mode 100644
index 000000000000..a6c1b3a16dfc
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/system.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/system.h
+ */
+
+#include <plat/system.h>
diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h
new file mode 100644
index 000000000000..4793790d53cc
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/timex.h
+ */
+
+#include <plat/timex.h>
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
new file mode 100644
index 000000000000..0ff22dc075c7
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/uncompress.h
+ */
+
+#include <plat/uncompress.h>
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
new file mode 100644
index 000000000000..1b2af14df151
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-omap1/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END	(PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 7030f9281ea1..d9b8d82530ae 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,10 +15,11 @@
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+
+#include "clock.h"
 
-extern int omap1_clk_init(void);
 extern void omap_check_revision(void);
 extern void omap_sram_init(void);
 extern void omapfb_reserve_sdram(void);
@@ -36,33 +37,17 @@ static struct map_desc omap_io_desc[] __initdata = {
 	}
 };
 
-#ifdef CONFIG_ARCH_OMAP730
-static struct map_desc omap730_io_desc[] __initdata = {
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+static struct map_desc omap7xx_io_desc[] __initdata = {
 	{
-		.virtual	= OMAP730_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP730_DSP_START),
-		.length		= OMAP730_DSP_SIZE,
+		.virtual	= OMAP7XX_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP7XX_DSP_START),
+		.length		= OMAP7XX_DSP_SIZE,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= OMAP730_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP730_DSPREG_START),
-		.length		= OMAP730_DSPREG_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP850
-static struct map_desc omap850_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP850_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP850_DSP_START),
-		.length		= OMAP850_DSP_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= OMAP850_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP850_DSPREG_START),
-		.length		= OMAP850_DSPREG_SIZE,
+		.virtual	= OMAP7XX_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP7XX_DSPREG_START),
+		.length		= OMAP7XX_DSPREG_SIZE,
 		.type		= MT_DEVICE
 	}
 };
@@ -120,18 +105,11 @@ void __init omap1_map_common_io(void)
 	 */
 	omap_check_revision();
 
-#ifdef CONFIG_ARCH_OMAP730
-	if (cpu_is_omap730()) {
-		iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
-	}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP850
-	if (cpu_is_omap850()) {
-		iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+	if (cpu_is_omap7xx()) {
+		iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
 	}
 #endif
-
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
 		iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index de03c8448994..db913c34d1fe 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -46,7 +46,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <mach/gpio.h>
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 #define IRQ_BANK(irq) ((irq) >> 5)
 #define IRQ_BIT(irq)  ((irq) & 0x1f)
@@ -137,16 +137,8 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
 	irq_bank_writel(val, bank, offset);
 }
 
-#ifdef CONFIG_ARCH_OMAP730
-static struct omap_irq_bank omap730_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
-	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
-	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP850
-static struct omap_irq_bank omap850_irq_banks[] = {
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+static struct omap_irq_bank omap7xx_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
 	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
 	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
@@ -186,16 +178,10 @@ void __init omap_init_irq(void)
 {
 	int i, j;
 
-#ifdef CONFIG_ARCH_OMAP730
-	if (cpu_is_omap730()) {
-		irq_banks = omap730_irq_banks;
-		irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	if (cpu_is_omap850()) {
-		irq_banks = omap850_irq_banks;
-		irq_bank_count = ARRAY_SIZE(omap850_irq_banks);
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (cpu_is_omap7xx()) {
+		irq_banks = omap7xx_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -247,10 +233,8 @@ void __init omap_init_irq(void)
 
 	/* Unmask level 2 handler */
 
-	if (cpu_is_omap730())
-		omap_unmask_irq(INT_730_IH2_IRQ);
-	else if (cpu_is_omap850())
-		omap_unmask_irq(INT_850_IH2_IRQ);
+	if (cpu_is_omap7xx())
+		omap_unmask_irq(INT_7XX_IH2_IRQ);
 	else if (cpu_is_omap15xx())
 		omap_unmask_irq(INT_1510_IH2_IRQ);
 	else if (cpu_is_omap16xx())
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
new file mode 100644
index 000000000000..3be11af687bb
--- /dev/null
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -0,0 +1,448 @@
+/*
+ * linux/arch/arm/mach-omap1/lcd_dma.c
+ *
+ * Extracted from arch/arm/plat-omap/dma.c
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Support functions for the OMAP internal DMA channels.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/lcdc.h>
+#include <plat/dma.h>
+
+int omap_lcd_dma_running(void)
+{
+	/*
+	 * On OMAP1510, internal LCD controller will start the transfer
+	 * when it gets enabled, so assume DMA running if LCD enabled.
+	 */
+	if (cpu_is_omap1510())
+		if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
+			return 1;
+
+	/* Check if LCD DMA is running */
+	if (cpu_is_omap16xx())
+		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+			return 1;
+
+	return 0;
+}
+
+static struct lcd_dma_info {
+	spinlock_t lock;
+	int reserved;
+	void (*callback)(u16 status, void *data);
+	void *cb_data;
+
+	int active;
+	unsigned long addr, size;
+	int rotate, data_type, xres, yres;
+	int vxres;
+	int mirror;
+	int xscale, yscale;
+	int ext_ctrl;
+	int src_port;
+	int single_transfer;
+} lcd_dma;
+
+void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+			 int data_type)
+{
+	lcd_dma.addr = addr;
+	lcd_dma.data_type = data_type;
+	lcd_dma.xres = fb_xres;
+	lcd_dma.yres = fb_yres;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1);
+
+void omap_set_lcd_dma_src_port(int port)
+{
+	lcd_dma.src_port = port;
+}
+
+void omap_set_lcd_dma_ext_controller(int external)
+{
+	lcd_dma.ext_ctrl = external;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
+
+void omap_set_lcd_dma_single_transfer(int single)
+{
+	lcd_dma.single_transfer = single;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
+
+void omap_set_lcd_dma_b1_rotation(int rotate)
+{
+	if (cpu_is_omap1510()) {
+		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
+		BUG();
+		return;
+	}
+	lcd_dma.rotate = rotate;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
+
+void omap_set_lcd_dma_b1_mirror(int mirror)
+{
+	if (cpu_is_omap1510()) {
+		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.mirror = mirror;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
+
+void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
+{
+	if (cpu_is_omap1510()) {
+		printk(KERN_ERR "DMA virtual resulotion is not supported "
+				"in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.vxres = vxres;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
+
+void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
+{
+	if (cpu_is_omap1510()) {
+		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.xscale = xscale;
+	lcd_dma.yscale = yscale;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
+
+static void set_b1_regs(void)
+{
+	unsigned long top, bottom;
+	int es;
+	u16 w;
+	unsigned long en, fn;
+	long ei, fi;
+	unsigned long vxres;
+	unsigned int xscale, yscale;
+
+	switch (lcd_dma.data_type) {
+	case OMAP_DMA_DATA_TYPE_S8:
+		es = 1;
+		break;
+	case OMAP_DMA_DATA_TYPE_S16:
+		es = 2;
+		break;
+	case OMAP_DMA_DATA_TYPE_S32:
+		es = 4;
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
+	xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
+	yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
+	BUG_ON(vxres < lcd_dma.xres);
+
+#define PIXADDR(x, y) (lcd_dma.addr +					\
+		((y) * vxres * yscale + (x) * xscale) * es)
+#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
+
+	switch (lcd_dma.rotate) {
+	case 0:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(0, 0);
+			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			/* 1510 DMA requires the bottom address to be 2 more
+			 * than the actual last memory access location. */
+			if (cpu_is_omap1510() &&
+				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
+					bottom += 2;
+			ei = PIXSTEP(0, 0, 1, 0);
+			fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
+		} else {
+			top = PIXADDR(lcd_dma.xres - 1, 0);
+			bottom = PIXADDR(0, lcd_dma.yres - 1);
+			ei = PIXSTEP(1, 0, 0, 0);
+			fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
+		}
+		en = lcd_dma.xres;
+		fn = lcd_dma.yres;
+		break;
+	case 90:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(0, lcd_dma.yres - 1);
+			bottom = PIXADDR(lcd_dma.xres - 1, 0);
+			ei = PIXSTEP(0, 1, 0, 0);
+			fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
+		} else {
+			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			bottom = PIXADDR(0, 0);
+			ei = PIXSTEP(0, 1, 0, 0);
+			fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
+		}
+		en = lcd_dma.yres;
+		fn = lcd_dma.xres;
+		break;
+	case 180:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			bottom = PIXADDR(0, 0);
+			ei = PIXSTEP(1, 0, 0, 0);
+			fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
+		} else {
+			top = PIXADDR(0, lcd_dma.yres - 1);
+			bottom = PIXADDR(lcd_dma.xres - 1, 0);
+			ei = PIXSTEP(0, 0, 1, 0);
+			fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
+		}
+		en = lcd_dma.xres;
+		fn = lcd_dma.yres;
+		break;
+	case 270:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(lcd_dma.xres - 1, 0);
+			bottom = PIXADDR(0, lcd_dma.yres - 1);
+			ei = PIXSTEP(0, 0, 0, 1);
+			fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
+		} else {
+			top = PIXADDR(0, 0);
+			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			ei = PIXSTEP(0, 0, 0, 1);
+			fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
+		}
+		en = lcd_dma.yres;
+		fn = lcd_dma.xres;
+		break;
+	default:
+		BUG();
+		return;	/* Suppress warning about uninitialized vars */
+	}
+
+	if (cpu_is_omap1510()) {
+		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
+		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
+		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
+		omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
+
+		return;
+	}
+
+	/* 1610 regs */
+	omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
+	omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
+	omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
+	omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
+
+	omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
+	omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CSDP);
+	w &= ~0x03;
+	w |= lcd_dma.data_type;
+	omap_writew(w, OMAP1610_DMA_LCD_CSDP);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	/* Always set the source port as SDRAM for now*/
+	w &= ~(0x03 << 6);
+	if (lcd_dma.callback != NULL)
+		w |= 1 << 1;		/* Block interrupt enable */
+	else
+		w &= ~(1 << 1);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
+	if (!(lcd_dma.rotate || lcd_dma.mirror ||
+	      lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	/* Set the double-indexed addressing mode */
+	w |= (0x03 << 12);
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+	omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
+	omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
+	omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
+}
+
+static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
+{
+	u16 w;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	if (unlikely(!(w & (1 << 3)))) {
+		printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
+		return IRQ_NONE;
+	}
+	/* Ack the IRQ */
+	w |= (1 << 3);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+	lcd_dma.active = 0;
+	if (lcd_dma.callback != NULL)
+		lcd_dma.callback(w, lcd_dma.cb_data);
+
+	return IRQ_HANDLED;
+}
+
+int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+			 void *data)
+{
+	spin_lock_irq(&lcd_dma.lock);
+	if (lcd_dma.reserved) {
+		spin_unlock_irq(&lcd_dma.lock);
+		printk(KERN_ERR "LCD DMA channel already reserved\n");
+		BUG();
+		return -EBUSY;
+	}
+	lcd_dma.reserved = 1;
+	spin_unlock_irq(&lcd_dma.lock);
+	lcd_dma.callback = callback;
+	lcd_dma.cb_data = data;
+	lcd_dma.active = 0;
+	lcd_dma.single_transfer = 0;
+	lcd_dma.rotate = 0;
+	lcd_dma.vxres = 0;
+	lcd_dma.mirror = 0;
+	lcd_dma.xscale = 0;
+	lcd_dma.yscale = 0;
+	lcd_dma.ext_ctrl = 0;
+	lcd_dma.src_port = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL(omap_request_lcd_dma);
+
+void omap_free_lcd_dma(void)
+{
+	spin_lock(&lcd_dma.lock);
+	if (!lcd_dma.reserved) {
+		spin_unlock(&lcd_dma.lock);
+		printk(KERN_ERR "LCD DMA is not reserved\n");
+		BUG();
+		return;
+	}
+	if (!cpu_is_omap1510())
+		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
+			    OMAP1610_DMA_LCD_CCR);
+	lcd_dma.reserved = 0;
+	spin_unlock(&lcd_dma.lock);
+}
+EXPORT_SYMBOL(omap_free_lcd_dma);
+
+void omap_enable_lcd_dma(void)
+{
+	u16 w;
+
+	/*
+	 * Set the Enable bit only if an external controller is
+	 * connected. Otherwise the OMAP internal controller will
+	 * start the transfer when it gets enabled.
+	 */
+	if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w |= 1 << 8;
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
+	lcd_dma.active = 1;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	w |= 1 << 7;
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+}
+EXPORT_SYMBOL(omap_enable_lcd_dma);
+
+void omap_setup_lcd_dma(void)
+{
+	BUG_ON(lcd_dma.active);
+	if (!cpu_is_omap1510()) {
+		/* Set some reasonable defaults */
+		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
+		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
+		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
+	}
+	set_b1_regs();
+	if (!cpu_is_omap1510()) {
+		u16 w;
+
+		w = omap_readw(OMAP1610_DMA_LCD_CCR);
+		/*
+		 * If DMA was already active set the end_prog bit to have
+		 * the programmed register set loaded into the active
+		 * register set.
+		 */
+		w |= 1 << 11;		/* End_prog */
+		if (!lcd_dma.single_transfer)
+			w |= (3 << 8);	/* Auto_init, repeat */
+		omap_writew(w, OMAP1610_DMA_LCD_CCR);
+	}
+}
+EXPORT_SYMBOL(omap_setup_lcd_dma);
+
+void omap_stop_lcd_dma(void)
+{
+	u16 w;
+
+	lcd_dma.active = 0;
+	if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	w &= ~(1 << 7);
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w &= ~(1 << 8);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+}
+EXPORT_SYMBOL(omap_stop_lcd_dma);
+
+static int __init omap_init_lcd_dma(void)
+{
+	int r;
+
+	if (cpu_is_omap16xx()) {
+		u16 w;
+
+		/* this would prevent OMAP sleep */
+		w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+		w &= ~(1 << 8);
+		omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+	}
+
+	spin_lock_init(&lcd_dma.lock);
+
+	r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
+			"LCD DMA", NULL);
+	if (r != 0)
+		printk(KERN_ERR "unable to request IRQ for LCD DMA "
+			       "(error %d)\n", r);
+
+	return r;
+}
+
+arch_initcall(omap_init_lcd_dma);
+
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 17c9d0e04216..b4f9be52e1e8 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -19,7 +19,7 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
 
 #include "leds.h"
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 8cbf2562dcaa..277f356d4cd0 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -10,7 +10,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 6810b4aeb02c..caf889aaa248 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <mach/mailbox.h>
+#include <plat/mailbox.h>
 #include <mach/irqs.h>
 
 #define MAILBOX_ARM2DSP1		0x00
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 505d98cfe508..6bddce104ee9 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -18,11 +18,11 @@
 #include <linux/platform_device.h>
 
 #include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mux.h>
-#include <mach/cpu.h>
-#include <mach/mcbsp.h>
-#include <mach/dsp_common.h>
+#include <plat/dma.h>
+#include <plat/mux.h>
+#include <plat/cpu.h>
+#include <plat/mcbsp.h>
+#include <plat/dsp_common.h>
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
@@ -79,29 +79,29 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 	.free		= omap1_mcbsp_free,
 };
 
-#ifdef CONFIG_ARCH_OMAP730
-static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
 	{
-		.phys_base	= OMAP730_MCBSP1_BASE,
+		.phys_base	= OMAP7XX_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
-		.rx_irq		= INT_730_McBSP1RX,
-		.tx_irq		= INT_730_McBSP1TX,
+		.rx_irq		= INT_7XX_McBSP1RX,
+		.tx_irq		= INT_7XX_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
-		.phys_base	= OMAP730_MCBSP2_BASE,
+		.phys_base	= OMAP7XX_MCBSP2_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
-		.rx_irq		= INT_730_McBSP2RX,
-		.tx_irq		= INT_730_McBSP2TX,
+		.rx_irq		= INT_7XX_McBSP2RX,
+		.tx_irq		= INT_7XX_McBSP2TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 };
-#define OMAP730_MCBSP_PDATA_SZ		ARRAY_SIZE(omap730_mcbsp_pdata)
+#define OMAP7XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap7xx_mcbsp_pdata)
 #else
-#define omap730_mcbsp_pdata		NULL
-#define OMAP730_MCBSP_PDATA_SZ		0
+#define omap7xx_mcbsp_pdata		NULL
+#define OMAP7XX_MCBSP_PDATA_SZ		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -172,8 +172,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 
 int __init omap1_mcbsp_init(void)
 {
-	if (cpu_is_omap730())
-		omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
+	if (cpu_is_omap7xx())
+		omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
 	if (cpu_is_omap15xx())
 		omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
 	if (cpu_is_omap16xx())
@@ -184,9 +184,9 @@ int __init omap1_mcbsp_init(void)
 	if (!mcbsp_ptr)
 		return -ENOMEM;
 
-	if (cpu_is_omap730())
-		omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
-						OMAP730_MCBSP_PDATA_SZ);
+	if (cpu_is_omap7xx())
+		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata,
+						OMAP7XX_MCBSP_PDATA_SZ);
 
 	if (cpu_is_omap15xx())
 		omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata,
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 721e0d9d8b1d..07212cc621ae 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -29,53 +29,45 @@
 
 #include <asm/system.h>
 
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
 static struct omap_mux_cfg arch_mux_cfg;
 
-#ifdef CONFIG_ARCH_OMAP730
-static struct pin_config __initdata_or_module omap730_pins[] = {
-MUX_CFG_730("E2_730_KBR0",        12,   21,    0,   20,   1, 0)
-MUX_CFG_730("J7_730_KBR1",        12,   25,    0,   24,   1, 0)
-MUX_CFG_730("E1_730_KBR2",        12,   29,    0,   28,   1, 0)
-MUX_CFG_730("F3_730_KBR3",        13,    1,    0,    0,   1, 0)
-MUX_CFG_730("D2_730_KBR4",        13,    5,    0,    4,   1, 0)
-MUX_CFG_730("C2_730_KBC0",        13,    9,    0,    8,   1, 0)
-MUX_CFG_730("D3_730_KBC1",        13,   13,    0,   12,   1, 0)
-MUX_CFG_730("E4_730_KBC2",        13,   17,    0,   16,   1, 0)
-MUX_CFG_730("F4_730_KBC3",        13,   21,    0,   20,   1, 0)
-MUX_CFG_730("E3_730_KBC4",        13,   25,    0,   24,   1, 0)
-
-MUX_CFG_730("AA17_730_USB_DM",     2,   21,    0,   20,   0, 0)
-MUX_CFG_730("W16_730_USB_PU_EN",   2,   25,    0,   24,   0, 0)
-MUX_CFG_730("W17_730_USB_VBUSI",   2,   29,    0,   28,   0, 0)
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+static struct pin_config __initdata_or_module omap7xx_pins[] = {
+MUX_CFG_7XX("E2_7XX_KBR0",        12,   21,    0,   20,   1, 0)
+MUX_CFG_7XX("J7_7XX_KBR1",        12,   25,    0,   24,   1, 0)
+MUX_CFG_7XX("E1_7XX_KBR2",        12,   29,    0,   28,   1, 0)
+MUX_CFG_7XX("F3_7XX_KBR3",        13,    1,    0,    0,   1, 0)
+MUX_CFG_7XX("D2_7XX_KBR4",        13,    5,    0,    4,   1, 0)
+MUX_CFG_7XX("C2_7XX_KBC0",        13,    9,    0,    8,   1, 0)
+MUX_CFG_7XX("D3_7XX_KBC1",        13,   13,    0,   12,   1, 0)
+MUX_CFG_7XX("E4_7XX_KBC2",        13,   17,    0,   16,   1, 0)
+MUX_CFG_7XX("F4_7XX_KBC3",        13,   21,    0,   20,   1, 0)
+MUX_CFG_7XX("E3_7XX_KBC4",        13,   25,    0,   24,   1, 0)
+
+MUX_CFG_7XX("AA17_7XX_USB_DM",     2,   21,    0,   20,   0, 0)
+MUX_CFG_7XX("W16_7XX_USB_PU_EN",   2,   25,    0,   24,   0, 0)
+MUX_CFG_7XX("W17_7XX_USB_VBUSI",   2,   29,    6,   28,   1, 0)
+MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3,    3,    1,    2,   0, 0)
+MUX_CFG_7XX("W19_7XX_USB_DCRST",   3,    7,    1,    6,   0, 0)
+
+/* MMC Pins */
+MUX_CFG_7XX("MMC_7XX_CMD",         2,    9,    0,    8,   1, 0)
+MUX_CFG_7XX("MMC_7XX_CLK",         2,   13,    0,   12,   1, 0)
+MUX_CFG_7XX("MMC_7XX_DAT0",        2,   17,    0,   16,   1, 0)
+
+/* I2C interface */
+MUX_CFG_7XX("I2C_7XX_SCL",         5,    1,    0,    0,   1, 0)
+MUX_CFG_7XX("I2C_7XX_SDA",         5,    5,    0,    0,   1, 0)
 };
-#define OMAP730_PINS_SZ		ARRAY_SIZE(omap730_pins)
+#define OMAP7XX_PINS_SZ		ARRAY_SIZE(omap7xx_pins)
 #else
-#define omap730_pins		NULL
-#define OMAP730_PINS_SZ		0
-#endif	/* CONFIG_ARCH_OMAP730 */
-
-#ifdef CONFIG_ARCH_OMAP850
-struct pin_config __initdata_or_module omap850_pins[] = {
-MUX_CFG_850("E2_850_KBR0",        12,   21,    0,   20,   1, 0)
-MUX_CFG_850("J7_850_KBR1",        12,   25,    0,   24,   1, 0)
-MUX_CFG_850("E1_850_KBR2",        12,   29,    0,   28,   1, 0)
-MUX_CFG_850("F3_850_KBR3",        13,    1,    0,    0,   1, 0)
-MUX_CFG_850("D2_850_KBR4",        13,    5,    0,    4,   1, 0)
-MUX_CFG_850("C2_850_KBC0",        13,    9,    0,    8,   1, 0)
-MUX_CFG_850("D3_850_KBC1",        13,   13,    0,   12,   1, 0)
-MUX_CFG_850("E4_850_KBC2",        13,   17,    0,   16,   1, 0)
-MUX_CFG_850("F4_850_KBC3",        13,   21,    0,   20,   1, 0)
-MUX_CFG_850("E3_850_KBC4",        13,   25,    0,   24,   1, 0)
-
-MUX_CFG_850("AA17_850_USB_DM",     2,   21,    0,   20,   0, 0)
-MUX_CFG_850("W16_850_USB_PU_EN",   2,   25,    0,   24,   0, 0)
-MUX_CFG_850("W17_850_USB_VBUSI",   2,   29,    0,   28,   0, 0)
-};
-#endif
+#define omap7xx_pins		NULL
+#define OMAP7XX_PINS_SZ		0
+#endif	/* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
 
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
 static struct pin_config __initdata_or_module omap1xxx_pins[] = {
@@ -438,11 +430,6 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
 			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
 	}
-
-#ifdef CONFIG_ARCH_OMAP850
-	omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins));
-#endif
-
 #endif
 
 #ifdef CONFIG_OMAP_MUX_ERRORS
@@ -454,9 +441,9 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 
 int __init omap1_mux_init(void)
 {
-	if (cpu_is_omap730()) {
-		arch_mux_cfg.pins	= omap730_pins;
-		arch_mux_cfg.size	= OMAP730_PINS_SZ;
+	if (cpu_is_omap7xx()) {
+		arch_mux_cfg.pins	= omap7xx_pins;
+		arch_mux_cfg.size	= OMAP7XX_PINS_SZ;
 		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
 	}
 
diff --git a/arch/arm/mach-omap1/opp.h b/arch/arm/mach-omap1/opp.h
new file mode 100644
index 000000000000..07074d79adce
--- /dev/null
+++ b/arch/arm/mach-omap1/opp.h
@@ -0,0 +1,28 @@
+/*
+ *  linux/arch/arm/mach-omap1/opp.h
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_OPP_H
+#define __ARCH_ARM_MACH_OMAP1_OPP_H
+
+#include <linux/types.h>
+
+struct mpu_rate {
+	unsigned long		rate;
+	unsigned long		xtal;
+	unsigned long		pll_rate;
+	__u16			ckctl_val;
+	__u16			dpllctl_val;
+};
+
+extern struct mpu_rate omap1_rate_table[];
+
+#endif
diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c
new file mode 100644
index 000000000000..75a546514994
--- /dev/null
+++ b/arch/arm/mach-omap1/opp_data.c
@@ -0,0 +1,59 @@
+/*
+ *  linux/arch/arm/mach-omap1/opp_data.c
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "opp.h"
+
+/*-------------------------------------------------------------------------
+ * Omap1 MPU rate table
+ *-------------------------------------------------------------------------*/
+struct mpu_rate omap1_rate_table[] = {
+	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
+	 * NOTE: Comment order here is different from bits in CKCTL value:
+	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
+	 */
+#if defined(CONFIG_OMAP_ARM_216MHZ)
+	{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_195MHZ)
+	{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_192MHZ)
+	{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
+	{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
+	{  96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
+	{  48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
+	{  24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_182MHZ)
+	{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_168MHZ)
+	{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_150MHZ)
+	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
+#endif
+#if defined(CONFIG_OMAP_ARM_120MHZ)
+	{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
+#endif
+#if defined(CONFIG_OMAP_ARM_96MHZ)
+	{  96000000, 12000000,  96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
+#endif
+#if defined(CONFIG_OMAP_ARM_60MHZ)
+	{  60000000, 12000000,  60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
+#endif
+#if defined(CONFIG_OMAP_ARM_30MHZ)
+	{  30000000, 12000000,  60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
+#endif
+	{ 0, 0, 0, 0, 0 },
+};
+
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 5218943c91c0..b1d3f9fade23 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -48,21 +48,21 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 #include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/tc.h>
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/dmtimer.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/tc.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/dmtimer.h>
 
 #include "pm.h"
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
-static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
+static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
@@ -183,9 +183,9 @@ static void omap_pm_wakeup_setup(void)
 	 * drivers must still separately call omap_set_gpio_wakeup() to
 	 * wake up to a GPIO interrupt.
 	 */
-	if (cpu_is_omap730())
-		level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
-			OMAP_IRQ_BIT(INT_730_IH2_IRQ);
+	if (cpu_is_omap7xx())
+		level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_7XX_IH2_IRQ);
 	else if (cpu_is_omap15xx())
 		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
 			OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
@@ -195,10 +195,10 @@ static void omap_pm_wakeup_setup(void)
 
 	omap_writel(~level1_wake, OMAP_IH1_MIR);
 
-	if (cpu_is_omap730()) {
+	if (cpu_is_omap7xx()) {
 		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
-		omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) |
-				OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)),
+		omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) |
+				OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)),
 				OMAP_IH2_1_MIR);
 	} else if (cpu_is_omap15xx()) {
 		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
@@ -253,15 +253,15 @@ void omap1_pm_suspend(void)
 	 * Save interrupt, MPUI, ARM and UPLD control registers.
 	 */
 
-	if (cpu_is_omap730()) {
-		MPUI730_SAVE(OMAP_IH1_MIR);
-		MPUI730_SAVE(OMAP_IH2_0_MIR);
-		MPUI730_SAVE(OMAP_IH2_1_MIR);
-		MPUI730_SAVE(MPUI_CTRL);
-		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI730_SAVE(EMIFS_CONFIG);
-		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+	if (cpu_is_omap7xx()) {
+		MPUI7XX_SAVE(OMAP_IH1_MIR);
+		MPUI7XX_SAVE(OMAP_IH2_0_MIR);
+		MPUI7XX_SAVE(OMAP_IH2_1_MIR);
+		MPUI7XX_SAVE(MPUI_CTRL);
+		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI7XX_SAVE(EMIFS_CONFIG);
+		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
 
 	} else if (cpu_is_omap15xx()) {
 		MPUI1510_SAVE(OMAP_IH1_MIR);
@@ -306,7 +306,7 @@ void omap1_pm_suspend(void)
 	omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
 
 		/* shut down dsp_ck */
-	if (!cpu_is_omap730())
+	if (!cpu_is_omap7xx())
 		omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
 
 	/* temporarily enabling api_ck to access DSP registers */
@@ -383,12 +383,12 @@ void omap1_pm_suspend(void)
 	ULPD_RESTORE(ULPD_CLOCK_CTRL);
 	ULPD_RESTORE(ULPD_STATUS_REQ);
 
-	if (cpu_is_omap730()) {
-		MPUI730_RESTORE(EMIFS_CONFIG);
-		MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
-		MPUI730_RESTORE(OMAP_IH1_MIR);
-		MPUI730_RESTORE(OMAP_IH2_0_MIR);
-		MPUI730_RESTORE(OMAP_IH2_1_MIR);
+	if (cpu_is_omap7xx()) {
+		MPUI7XX_RESTORE(EMIFS_CONFIG);
+		MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG);
+		MPUI7XX_RESTORE(OMAP_IH1_MIR);
+		MPUI7XX_RESTORE(OMAP_IH2_0_MIR);
+		MPUI7XX_RESTORE(OMAP_IH2_1_MIR);
 	} else if (cpu_is_omap15xx()) {
 		MPUI1510_RESTORE(MPUI_CTRL);
 		MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
@@ -461,13 +461,13 @@ static int omap_pm_read_proc(
 	ULPD_SAVE(ULPD_DPLL_CTRL);
 	ULPD_SAVE(ULPD_POWER_CTRL);
 
-	if (cpu_is_omap730()) {
-		MPUI730_SAVE(MPUI_CTRL);
-		MPUI730_SAVE(MPUI_DSP_STATUS);
-		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
-		MPUI730_SAVE(EMIFS_CONFIG);
+	if (cpu_is_omap7xx()) {
+		MPUI7XX_SAVE(MPUI_CTRL);
+		MPUI7XX_SAVE(MPUI_DSP_STATUS);
+		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
+		MPUI7XX_SAVE(EMIFS_CONFIG);
 	} else if (cpu_is_omap15xx()) {
 		MPUI1510_SAVE(MPUI_CTRL);
 		MPUI1510_SAVE(MPUI_DSP_STATUS);
@@ -517,20 +517,20 @@ static int omap_pm_read_proc(
 		   ULPD_SHOW(ULPD_STATUS_REQ),
 		   ULPD_SHOW(ULPD_POWER_CTRL));
 
-		if (cpu_is_omap730()) {
+		if (cpu_is_omap7xx()) {
 			my_buffer_offset += sprintf(my_base + my_buffer_offset,
-			   "MPUI730_CTRL_REG	     0x%-8x \n"
-			   "MPUI730_DSP_STATUS_REG:      0x%-8x \n"
-			   "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
-			   "MPUI730_DSP_API_CONFIG_REG:  0x%-8x \n"
-			   "MPUI730_SDRAM_CONFIG_REG:    0x%-8x \n"
-			   "MPUI730_EMIFS_CONFIG_REG:    0x%-8x \n",
-			   MPUI730_SHOW(MPUI_CTRL),
-			   MPUI730_SHOW(MPUI_DSP_STATUS),
-			   MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
-			   MPUI730_SHOW(MPUI_DSP_API_CONFIG),
-			   MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
-			   MPUI730_SHOW(EMIFS_CONFIG));
+			   "MPUI7XX_CTRL_REG	     0x%-8x \n"
+			   "MPUI7XX_DSP_STATUS_REG:      0x%-8x \n"
+			   "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+			   "MPUI7XX_DSP_API_CONFIG_REG:  0x%-8x \n"
+			   "MPUI7XX_SDRAM_CONFIG_REG:    0x%-8x \n"
+			   "MPUI7XX_EMIFS_CONFIG_REG:    0x%-8x \n",
+			   MPUI7XX_SHOW(MPUI_CTRL),
+			   MPUI7XX_SHOW(MPUI_DSP_STATUS),
+			   MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG),
+			   MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
+			   MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
+			   MPUI7XX_SHOW(EMIFS_CONFIG));
 		} else if (cpu_is_omap15xx()) {
 			my_buffer_offset += sprintf(my_base + my_buffer_offset,
 			   "MPUI1510_CTRL_REG             0x%-8x \n"
@@ -668,9 +668,9 @@ static int __init omap_pm_init(void)
 	 * These routines need to be in SRAM as that's the only
 	 * memory the MPU can see when it wakes up.
 	 */
-	if (cpu_is_omap730()) {
-		omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
-						   omap730_cpu_suspend_sz);
+	if (cpu_is_omap7xx()) {
+		omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend,
+						   omap7xx_cpu_suspend_sz);
 	} else if (cpu_is_omap15xx()) {
 		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
 						   omap1510_cpu_suspend_sz);
@@ -686,8 +686,8 @@ static int __init omap_pm_init(void)
 
 	pm_idle = omap1_pm_idle;
 
-	if (cpu_is_omap730())
-		setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
+	if (cpu_is_omap7xx())
+		setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
 	else if (cpu_is_omap16xx())
 		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
 
@@ -700,8 +700,8 @@ static int __init omap_pm_init(void)
 	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
 
 	/* Configure IDLECT3 */
-	if (cpu_is_omap730())
-		omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
+	if (cpu_is_omap7xx())
+		omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3);
 	else if (cpu_is_omap16xx())
 		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
 
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index c4f05bdcf8a6..56a647986ae9 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -98,13 +98,14 @@
 #define OMAP1610_IDLECT3		0xfffece24
 #define OMAP1610_IDLE_LOOP_REQUEST	0x0400
 
-#define OMAP730_IDLECT1_SLEEP_VAL	0x16c7
-#define OMAP730_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP730_IDLECT3_VAL		0x3f
-#define OMAP730_IDLECT3		0xfffece24
-#define OMAP730_IDLE_LOOP_REQUEST	0x0C00
+#define OMAP7XX_IDLECT1_SLEEP_VAL	0x16c7
+#define OMAP7XX_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP7XX_IDLECT3_VAL		0x3f
+#define OMAP7XX_IDLECT3		0xfffece24
+#define OMAP7XX_IDLE_LOOP_REQUEST	0x0C00
 
 #if     !defined(CONFIG_ARCH_OMAP730) && \
+	!defined(CONFIG_ARCH_OMAP850) && \
 	!defined(CONFIG_ARCH_OMAP15XX) && \
 	!defined(CONFIG_ARCH_OMAP16XX)
 #warning "Power management for this processor not implemented yet"
@@ -122,17 +123,17 @@ extern void allow_idle_sleep(void);
 extern void omap1_pm_idle(void);
 extern void omap1_pm_suspend(void);
 
-extern void omap730_cpu_suspend(unsigned short, unsigned short);
+extern void omap7xx_cpu_suspend(unsigned short, unsigned short);
 extern void omap1510_cpu_suspend(unsigned short, unsigned short);
 extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap730_idle_loop_suspend(void);
+extern void omap7xx_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);
 
-extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap7xx_cpu_suspend_sz;
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap730_idle_loop_suspend_sz;
+extern unsigned int omap7xx_idle_loop_suspend_sz;
 extern unsigned int omap1510_idle_loop_suspend_sz;
 extern unsigned int omap1610_idle_loop_suspend_sz;
 
@@ -155,9 +156,9 @@ extern void omap_serial_wake_trigger(int enable);
 #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
 #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
 
-#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
-#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
+#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x))
+#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]
 
 #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
 #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
@@ -232,24 +233,24 @@ enum mpui1510_save_state {
 #endif
 };
 
-enum mpui730_save_state {
-	MPUI730_SLEEP_SAVE_START = 0,
+enum mpui7xx_save_state {
+	MPUI7XX_SLEEP_SAVE_START = 0,
 	/*
 	 * MPUI registers 32 bits
 	 */
-	MPUI730_SLEEP_SAVE_MPUI_CTRL,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
-#if defined(CONFIG_ARCH_OMAP730)
-	MPUI730_SLEEP_SAVE_SIZE
+	MPUI7XX_SLEEP_SAVE_MPUI_CTRL,
+	MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR,
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	MPUI7XX_SLEEP_SAVE_SIZE
 #else
-	MPUI730_SLEEP_SAVE_SIZE = 0
+	MPUI7XX_SLEEP_SAVE_SIZE = 0
 #endif
 };
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index d23979bc0fd5..6e5207c81cf4 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,10 +22,10 @@
 
 #include <asm/mach-types.h>
 
-#include <mach/board.h>
-#include <mach/mux.h>
+#include <plat/board.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 
 static struct clk * uart1_ck;
 static struct clk * uart2_ck;
@@ -64,7 +64,6 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= INT_UART1,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -73,7 +72,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= INT_UART2,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -82,7 +80,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= INT_UART3,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -110,18 +107,11 @@ void __init omap_serial_init(void)
 {
 	int i;
 
-	if (cpu_is_omap730()) {
+	if (cpu_is_omap7xx()) {
 		serial_platform_data[0].regshift = 0;
 		serial_platform_data[1].regshift = 0;
-		serial_platform_data[0].irq = INT_730_UART_MODEM_1;
-		serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
-	}
-
-	if (cpu_is_omap850()) {
-		serial_platform_data[0].regshift = 0;
-		serial_platform_data[1].regshift = 0;
-		serial_platform_data[0].irq = INT_850_UART_MODEM_1;
-		serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2;
+		serial_platform_data[0].irq = INT_7XX_UART_MODEM_1;
+		serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2;
 	}
 
 	if (cpu_is_omap15xx()) {
@@ -130,7 +120,15 @@ void __init omap_serial_init(void)
 		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
 	}
 
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+	for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
+
+		/* Static mapping, never released */
+		serial_platform_data[i].membase =
+			ioremap(serial_platform_data[i].mapbase, SZ_2K);
+		if (!serial_platform_data[i].membase) {
+			printk(KERN_ERR "Could not ioremap uart%i\n", i);
+			continue;
+		}
 		switch (i) {
 		case 0:
 			uart1_ck = clk_get(NULL, "uart1_ck");
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index 22e8568339b0..ef771ce8b030 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-omap1/sleep.S
  *
- * Low-level OMAP730/1510/1610 sleep/wakeUp support
+ * Low-level OMAP7XX/1510/1610 sleep/wakeUp support
  *
  * Initial SA1110 code:
  * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
@@ -57,8 +57,8 @@
  *
  */
 
-#if defined(CONFIG_ARCH_OMAP730)
-ENTRY(omap730_cpu_suspend)
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ENTRY(omap7xx_cpu_suspend)
 
 	@ save registers on stack
 	stmfd	sp!, {r0 - r12, lr}
@@ -91,13 +91,13 @@ ENTRY(omap730_cpu_suspend)
 
 	@ turn off clock domains
 	@ do not disable PERCK (0x04)
-	mov	r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
-	orr	r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
+	mov	r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff
+	orr	r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 
 	@ request ARM idle
-	mov	r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff
-	orr	r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00
+	mov	r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff
+	orr	r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
 	@ disable instruction cache
@@ -113,7 +113,7 @@ ENTRY(omap730_cpu_suspend)
 	mov	r2, #0
 	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
 /*
- * omap730_cpu_suspend()'s resume point.
+ * omap7xx_cpu_suspend()'s resume point.
  *
  * It will just start executing here, so we'll restore stuff from the
  * stack.
@@ -132,9 +132,9 @@ ENTRY(omap730_cpu_suspend)
 	@ restore regs and return
 	ldmfd	sp!, {r0 - r12, pc}
 
-ENTRY(omap730_cpu_suspend_sz)
-	.word	. - omap730_cpu_suspend
-#endif /* CONFIG_ARCH_OMAP730 */
+ENTRY(omap7xx_cpu_suspend_sz)
+	.word	. - omap7xx_cpu_suspend
+#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
 
 #ifdef CONFIG_ARCH_OMAP15XX
 ENTRY(omap1510_cpu_suspend)
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index fd3f7396e162..9ad118563f7d 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -52,7 +52,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <mach/dmtimer.h>
+#include <plat/dmtimer.h>
 
 struct sys_timer omap_timer;
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index aad194f61a33..76c11ee113e9 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -24,6 +24,18 @@ config ARCH_OMAP3430
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 	select ARCH_OMAP_OTG
 
+config OMAP_PACKAGE_CBC
+       bool
+
+config OMAP_PACKAGE_CBB
+       bool
+
+config OMAP_PACKAGE_CUS
+       bool
+
+config OMAP_PACKAGE_CBP
+       bool
+
 comment "OMAP Board Type"
 	depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
 
@@ -52,26 +64,41 @@ config MACH_OMAP_2430SDP
 config MACH_OMAP3_BEAGLE
 	bool "OMAP3 BEAGLE board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_LDP
 	bool "OMAP3 LDP board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
 
 config MACH_OVERO
 	bool "Gumstix Overo board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3EVM
 	bool "OMAP 3530 EVM board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_OMAP3517EVM
+	bool "OMAP3517/ AM3517 EVM board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
+
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
+
+config MACH_OMAP3_TOUCHBOOK
+	bool "OMAP3 Touch Book"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select BACKLIGHT_CLASS_DEVICE
 
 config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
 
 config MACH_NOKIA_N800
        bool
@@ -92,11 +119,54 @@ config MACH_NOKIA_N8X0
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_ZOOM2
 	bool "OMAP3 Zoom2 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
+
+config MACH_OMAP_ZOOM3
+	bool "OMAP3630 Zoom3 board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBP
+
+config MACH_CM_T35
+	bool "CompuLab CM-T35 module"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CUS
+	select OMAP_MUX
+
+config MACH_IGEP0020
+	bool "IGEP0020"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
+
+config MACH_OMAP_3630SDP
+	bool "OMAP3630 SDP board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBP
 
 config MACH_OMAP_4430SDP
 	bool "OMAP 4430 SDP board"
 	depends on ARCH_OMAP4
+
+config OMAP3_EMU
+	bool "OMAP3 debugging peripherals"
+	depends on ARCH_OMAP3
+	select OC_ETM
+	help
+	  Say Y here to enable debugging hardware of omap3
+
+config OMAP3_SDRC_AC_TIMING
+	bool "Enable SDRC AC timing register changes"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	default n
+	help
+	  If you know that none of your system initiators will attempt to
+	  access SDRAM during CORE DVFS, select Y here.  This should boost
+	  SDRAM performance at lower CORE OPPs.  There are relatively few
+	  users who will wish to say yes at this point - almost everyone will
+	  wish to say no.  Selecting yes without understanding what is
+	  going on could result in system crashes;
+
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8cb16777661a..b32678b848bc 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -6,11 +6,14 @@
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
 
 omap-2-3-common				= irq.o sdrc.o omap_hwmod.o
+omap-3-4-common				= dpll.o
 prcm-common				= prcm.o powerdomain.o
-clock-common				= clock.o clockdomain.o
+clock-common				= clock.o clock_common_data.o clockdomain.o
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
+			    $(omap-3-4-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) prcm.o clock.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
@@ -23,6 +26,9 @@ obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
 obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
+# Pin multiplexing
+obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
+
 # SMS/SDRC
 obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o
@@ -31,7 +37,7 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
@@ -41,14 +47,26 @@ obj-$(CONFIG_ARCH_OMAP3)		+= cm.o
 obj-$(CONFIG_ARCH_OMAP4)		+= cm4xxx.o
 
 # Clock framework
-obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clock2xxx.o clock2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP2420)		+= opp2420_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clock34xx_data.o
+obj-$(CONFIG_ARCH_OMAP2430)		+= opp2430_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= clock44xx.o clock44xx_data.o
+
+# EMU peripherals
+obj-$(CONFIG_OMAP3_EMU)		+= emu.o
+
+obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
+mailbox_mach-objs			:= mailbox.o
 
 iommu-y					+= iommu2.o
 iommu-$(CONFIG_ARCH_OMAP3)		+= omap3-iommu.o
 
 obj-$(CONFIG_OMAP_IOMMU)		+= $(iommu-y)
 
+i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
+obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
@@ -69,17 +87,34 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
+					   board-rx51-sdram.o \
 					   board-rx51-peripherals.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
+					   board-zoom-peripherals.o \
 					   mmc-twl4030.o \
 					   board-zoom-debugboard.o
-
+obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
+					   board-zoom-peripherals.o \
+					   mmc-twl4030.o \
+					   board-zoom-debugboard.o
+obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
+					   board-zoom-peripherals.o \
+					   mmc-twl4030.o
+obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
+					   mmc-twl4030.o
+obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
+					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
+					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
+obj-$(CONFIG_MACH_OMAP3517EVM)     += board-am3517evm.o
+
 # Platform specific device init code
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
+obj-y					+= usb-ehci.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 42217b32f835..db9374bc528b 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -31,12 +31,12 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
-#include <mach/usb.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+#include <plat/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
@@ -221,7 +221,7 @@ static void __init omap_2430sdp_map_io(void)
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_2430sdp_map_io,
 	.init_irq	= omap_2430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 0acb5560229c..4cfb7b68dfad 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -30,17 +30,18 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/usb.h>
-#include <mach/common.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
-
-#include <mach/control.h>
-#include <mach/gpmc-smc91x.h>
-
+#include <plat/mcspi.h>
+#include <plat/board.h>
+#include <plat/usb.h>
+#include <plat/common.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
+#include <plat/display.h>
+
+#include <plat/control.h>
+#include <plat/gpmc-smc91x.h>
+
+#include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"
 
@@ -152,31 +153,152 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
 	},
 };
 
-static struct platform_device sdp3430_lcd_device = {
-	.name		= "sdp2430_lcd",
-	.id		= -1,
+
+#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	8
+#define SDP3430_LCD_PANEL_ENABLE_GPIO		5
+
+static unsigned backlight_gpio;
+static unsigned enable_gpio;
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init sdp3430_display_init(void)
+{
+	int r;
+
+	enable_gpio    = SDP3430_LCD_PANEL_ENABLE_GPIO;
+	backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
+
+	r = gpio_request(enable_gpio, "LCD reset");
+	if (r) {
+		printk(KERN_ERR "failed to get LCD reset GPIO\n");
+		goto err0;
+	}
+
+	r = gpio_request(backlight_gpio, "LCD Backlight");
+	if (r) {
+		printk(KERN_ERR "failed to get LCD backlight GPIO\n");
+		goto err1;
+	}
+
+	gpio_direction_output(enable_gpio, 0);
+	gpio_direction_output(backlight_gpio, 0);
+
+	return;
+err1:
+	gpio_free(enable_gpio);
+err0:
+	return;
+}
+
+static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_direction_output(enable_gpio, 1);
+	gpio_direction_output(backlight_gpio, 1);
+
+	lcd_enabled = 1;
+
+	return 0;
+}
+
+static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	lcd_enabled = 0;
+
+	gpio_direction_output(enable_gpio, 0);
+	gpio_direction_output(backlight_gpio, 0);
+}
+
+static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+
+	dvi_enabled = 1;
+
+	return 0;
+}
+
+static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	dvi_enabled = 0;
+}
+
+static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+
+static struct omap_dss_device sdp3430_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "sharp_ls_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 16,
+	.platform_enable	= sdp3430_panel_enable_lcd,
+	.platform_disable	= sdp3430_panel_disable_lcd,
 };
 
-static struct regulator_consumer_supply sdp3430_vdac_supply = {
-	.supply		= "vdac",
-	.dev		= &sdp3430_lcd_device.dev,
+static struct omap_dss_device sdp3430_dvi_device = {
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= sdp3430_panel_enable_dvi,
+	.platform_disable	= sdp3430_panel_disable_dvi,
 };
 
-static struct regulator_consumer_supply sdp3430_vdvi_supply = {
-	.supply		= "vdvi",
-	.dev		= &sdp3430_lcd_device.dev,
+static struct omap_dss_device sdp3430_tv_device = {
+	.name			= "tv",
+	.driver_name		= "venc",
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable	= sdp3430_panel_enable_tv,
+	.platform_disable	= sdp3430_panel_disable_tv,
 };
 
-static struct platform_device *sdp3430_devices[] __initdata = {
+
+static struct omap_dss_device *sdp3430_dss_devices[] = {
 	&sdp3430_lcd_device,
+	&sdp3430_dvi_device,
+	&sdp3430_tv_device,
 };
 
-static struct omap_lcd_config sdp3430_lcd_config __initdata = {
-	.ctrl_name	= "internal",
+static struct omap_dss_board_info sdp3430_dss_data = {
+	.num_devices	= ARRAY_SIZE(sdp3430_dss_devices),
+	.devices	= sdp3430_dss_devices,
+	.default_device	= &sdp3430_lcd_device,
+};
+
+static struct platform_device sdp3430_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &sdp3430_dss_data,
+	},
+};
+
+static struct regulator_consumer_supply sdp3430_vdda_dac_supply = {
+	.supply		= "vdda_dac",
+	.dev		= &sdp3430_dss_device.dev,
+};
+
+static struct platform_device *sdp3430_devices[] __initdata = {
+	&sdp3430_dss_device,
 };
 
 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
 };
 
 static void __init omap_3430sdp_init_irq(void)
@@ -392,22 +514,43 @@ static struct regulator_init_data sdp3430_vdac = {
 					| REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vdac_supply,
+	.consumer_supplies	= &sdp3430_vdda_dac_supply,
 };
 
 /* VPLL2 for digital video outputs */
+static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
+	{
+		.supply		= "vdvi",
+		.dev		= &sdp3430_lcd_device.dev,
+	},
+	{
+		.supply		= "vdds_dsi",
+		.dev		= &sdp3430_dss_device.dev,
+	}
+};
+
 static struct regulator_init_data sdp3430_vpll2 = {
 	.constraints = {
 		.name			= "VDVI",
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
+		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vdvi_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vpll2_supplies),
+	.consumer_supplies	= sdp3430_vpll2_supplies,
+};
+
+static struct twl4030_codec_audio_data sdp3430_audio = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data sdp3430_codec = {
+	.audio_mclk = 26000000,
+	.audio = &sdp3430_audio,
 };
 
 static struct twl4030_platform_data sdp3430_twldata = {
@@ -420,6 +563,7 @@ static struct twl4030_platform_data sdp3430_twldata = {
 	.madc		= &sdp3430_madc_data,
 	.keypad		= &sdp3430_kp_data,
 	.usb		= &sdp3430_usb_data,
+	.codec		= &sdp3430_codec,
 
 	.vaux1		= &sdp3430_vaux1,
 	.vaux2		= &sdp3430_vaux2,
@@ -481,11 +625,34 @@ static inline void board_smc91x_init(void)
 
 static void enable_board_wakeup_source(void)
 {
-	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+	/* T2 interrupt line (keypad) */
+	omap_mux_init_signal("sys_nirq",
+		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 57,
+	.reset_gpio_port[1]  = 61,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_3430sdp_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3430_i2c_init();
 	platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
 	if (omap_rev() > OMAP3430_REV_ES1_0)
@@ -499,7 +666,9 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	usb_musb_init();
 	board_smc91x_init();
+	sdp3430_display_init();
 	enable_board_wakeup_source();
+	usb_ehci_init(&ehci_pdata);
 }
 
 static void __init omap_3430sdp_map_io(void)
@@ -511,7 +680,7 @@ static void __init omap_3430sdp_map_io(void)
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_3430sdp_map_io,
 	.init_irq	= omap_3430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
new file mode 100755
index 000000000000..739059632811
--- /dev/null
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/gpmc-smc91x.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+
+#include <mach/board-zoom.h>
+
+#include "mux.h"
+#include "sdram-hynix-h8mbx00u0mer-0em.h"
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs             = 3,
+	.flags          = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	board_smc91x_data.gpio_irq = 158;
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */
+
+static void enable_board_wakeup_source(void)
+{
+	/* T2 interrupt line (keypad) */
+	omap_mux_init_signal("sys_nirq",
+		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
+}
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 126,
+	.reset_gpio_port[1]  = 61,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static void __init omap_sdp_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+static struct omap_board_config_kernel sdp_config[] __initdata = {
+};
+
+static void __init omap_sdp_init_irq(void)
+{
+	omap_board_config = sdp_config;
+	omap_board_config_size = ARRAY_SIZE(sdp_config);
+	omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
+			h8mbx00u0mer0em_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
+static void __init omap_sdp_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+	zoom_peripherals_init();
+	board_smc91x_init();
+	enable_board_wakeup_source();
+	usb_ehci_init(&ehci_pdata);
+}
+
+MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_sdp_map_io,
+	.init_irq	= omap_sdp_init_irq,
+	.init_machine	= omap_sdp_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 609a5a4a7e29..0c6be6b4a7e2 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -23,10 +23,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/control.h>
-#include <mach/timer-gp.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/control.h>
+#include <plat/timer-gp.h>
 #include <asm/hardware/gic.h>
 
 static struct platform_device sdp4430_lcd_device = {
@@ -52,8 +52,17 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
 
 static void __init gic_init_irq(void)
 {
-	gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
-	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	void __iomem *base;
+
+	/* Static mapping, never released */
+	base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
+	BUG_ON(!base);
+	gic_dist_init(0, base, 29);
+
+	/* Static mapping, never released */
+	gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
+	BUG_ON(!gic_cpu_base_addr);
+	gic_cpu_init(0, gic_cpu_base_addr);
 }
 
 static void __init omap_4430sdp_init_irq(void)
@@ -84,7 +93,7 @@ static void __init omap_4430sdp_map_io(void)
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_4430sdp_map_io,
 	.init_irq	= omap_4430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
new file mode 100644
index 000000000000..b4e6eca0e8a9
--- /dev/null
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -0,0 +1,97 @@
+/*
+ * linux/arch/arm/mach-omap2/board-am3517evm.c
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ * Author: Ranjith Lohithakshan <ranjithl@ti.com>
+ *
+ * Based on mach-omap2/board-omap3evm.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as  published by the
+ * Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/usb.h>
+
+#include "mux.h"
+
+/*
+ * Board initialization
+ */
+static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
+};
+
+static struct platform_device *am3517_evm_devices[] __initdata = {
+};
+
+static void __init am3517_evm_init_irq(void)
+{
+	omap_board_config = am3517_evm_config;
+	omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
+
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 57,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
+static void __init am3517_evm_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	platform_add_devices(am3517_evm_devices,
+				ARRAY_SIZE(am3517_evm_devices));
+
+	omap_serial_init();
+	usb_ehci_init(&ehci_pdata);
+}
+
+static void __init am3517_evm_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= am3517_evm_map_io,
+	.init_irq	= am3517_evm_init_irq,
+	.init_machine	= am3517_evm_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index a1132288c701..fbbd68d69cc8 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -26,6 +26,7 @@
 #include <linux/leds.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -33,13 +34,13 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/led.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
-#include <mach/control.h>
+#include <plat/led.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/control.h>
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13
@@ -120,6 +121,12 @@ static void __init apollon_flash_init(void)
 	apollon_flash_resource[0].end   = base + SZ_128K - 1;
 }
 
+static struct smc91x_platdata appolon_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource apollon_smc91x_resources[] = {
 	[0] = {
 		.flags  = IORESOURCE_MEM,
@@ -134,6 +141,9 @@ static struct resource apollon_smc91x_resources[] = {
 static struct platform_device apollon_smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
+	.dev	= {
+		.platform_data	= &appolon_smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(apollon_smc91x_resources),
 	.resource	= apollon_smc91x_resources,
 };
@@ -333,7 +343,7 @@ static void __init omap_apollon_map_io(void)
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_apollon_map_io,
 	.init_irq	= omap_apollon_init_irq,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
new file mode 100644
index 000000000000..1591aae64500
--- /dev/null
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -0,0 +1,599 @@
+/*
+ * board-cm-t35.c (CompuLab CM-T35 module)
+ *
+ * Copyright (C) 2009 CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/at24.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/nand.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+
+#include <mach/hardware.h>
+
+#include "mux.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define CM_T35_GPIO_PENDOWN	57
+
+#define CM_T35_SMSC911X_CS	5
+#define CM_T35_SMSC911X_GPIO	163
+#define SB_T35_SMSC911X_CS	4
+#define SB_T35_SMSC911X_GPIO	65
+
+#define NAND_BLOCK_SIZE		SZ_128K
+#define GPMC_CS0_BASE		0x60
+#define GPMC_CS0_BASE_ADDR	(OMAP34XX_GPMC_VIRT + GPMC_CS0_BASE)
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
+static struct smsc911x_platform_config cm_t35_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource cm_t35_smsc911x_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO),
+		.end	= OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device cm_t35_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cm_t35_smsc911x_resources),
+	.resource	= cm_t35_smsc911x_resources,
+	.dev		= {
+		.platform_data = &cm_t35_smsc911x_config,
+	},
+};
+
+static struct resource sb_t35_smsc911x_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO),
+		.end	= OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device sb_t35_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(sb_t35_smsc911x_resources),
+	.resource	= sb_t35_smsc911x_resources,
+	.dev		= {
+		.platform_data = &cm_t35_smsc911x_config,
+	},
+};
+
+static void __init cm_t35_init_smsc911x(struct platform_device *dev,
+					int cs, int irq_gpio)
+{
+	unsigned long cs_mem_base;
+
+	if (gpmc_cs_request(cs, SZ_16M, &cs_mem_base) < 0) {
+		pr_err("CM-T35: Failed request for GPMC mem for smsc911x\n");
+		return;
+	}
+
+	dev->resource[0].start = cs_mem_base + 0x0;
+	dev->resource[0].end   = cs_mem_base + 0xff;
+
+	if ((gpio_request(irq_gpio, "ETH IRQ") == 0) &&
+	    (gpio_direction_input(irq_gpio) == 0)) {
+		gpio_export(irq_gpio, 0);
+	} else {
+		pr_err("CM-T35: could not obtain gpio for SMSC911X IRQ\n");
+		return;
+	}
+
+	platform_device_register(dev);
+}
+
+static void __init cm_t35_init_ethernet(void)
+{
+	cm_t35_init_smsc911x(&cm_t35_smsc911x_device,
+			     CM_T35_SMSC911X_CS, CM_T35_SMSC911X_GPIO);
+	cm_t35_init_smsc911x(&sb_t35_smsc911x_device,
+			     SB_T35_SMSC911X_CS, SB_T35_SMSC911X_GPIO);
+}
+#else
+static inline void __init cm_t35_init_ethernet(void) { return; }
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led cm_t35_leds[] = {
+	[0] = {
+		.gpio			= 186,
+		.name			= "cm-t35:green",
+		.default_trigger	= "heartbeat",
+		.active_low		= 0,
+	},
+};
+
+static struct gpio_led_platform_data cm_t35_led_pdata = {
+	.num_leds	= ARRAY_SIZE(cm_t35_leds),
+	.leds		= cm_t35_leds,
+};
+
+static struct platform_device cm_t35_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &cm_t35_led_pdata,
+	},
+};
+
+static void __init cm_t35_init_led(void)
+{
+	platform_device_register(&cm_t35_led_device);
+}
+#else
+static inline void cm_t35_init_led(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+static struct mtd_partition cm_t35_nand_partitions[] = {
+	{
+		.name           = "xloader",
+		.offset         = 0,			/* Offset = 0x00000 */
+		.size           = 4 * NAND_BLOCK_SIZE,
+		.mask_flags     = MTD_WRITEABLE
+	},
+	{
+		.name           = "uboot",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size           = 15 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "uboot environment",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size           = 2 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "linux",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size           = 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data cm_t35_nand_data = {
+	.parts			= cm_t35_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(cm_t35_nand_partitions),
+	.dma_channel		= -1,	/* disable DMA in OMAP NAND driver */
+	.cs			= 0,
+	.gpmc_cs_baseaddr	= (void __iomem *)GPMC_CS0_BASE_ADDR,
+	.gpmc_baseaddr		= (void __iomem *)OMAP34XX_GPMC_VIRT,
+
+};
+
+static struct resource cm_t35_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device cm_t35_nand_device = {
+	.name		= "omap2-nand",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &cm_t35_nand_resource,
+	.dev		= {
+		.platform_data	= &cm_t35_nand_data,
+	},
+};
+
+static void __init cm_t35_init_nand(void)
+{
+	if (platform_device_register(&cm_t35_nand_device) < 0)
+		pr_err("CM-T35: Unable to register NAND device\n");
+}
+#else
+static inline void cm_t35_init_nand(void) {}
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <plat/mcspi.h>
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(CM_T35_GPIO_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info cm_t35_spi_board_info[] __initdata = {
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(CM_T35_GPIO_PENDOWN),
+		.platform_data		= &ads7846_config,
+	},
+};
+
+static void __init cm_t35_init_ads7846(void)
+{
+	if ((gpio_request(CM_T35_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
+	    (gpio_direction_input(CM_T35_GPIO_PENDOWN) == 0)) {
+		gpio_export(CM_T35_GPIO_PENDOWN, 0);
+	} else {
+		pr_err("CM-T35: could not obtain gpio for ADS7846_PENDOWN\n");
+		return;
+	}
+
+	spi_register_board_info(cm_t35_spi_board_info,
+				ARRAY_SIZE(cm_t35_spi_board_info));
+}
+#else
+static inline void cm_t35_init_ads7846(void) {}
+#endif
+
+static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply cm_t35_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data cm_t35_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &cm_t35_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data cm_t35_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &cm_t35_vsim_supply,
+};
+
+static struct twl4030_usb_data cm_t35_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static int cm_t35_keymap[] = {
+	KEY(0, 0, KEY_A),	KEY(0, 1, KEY_B),	KEY(0, 2, KEY_LEFT),
+	KEY(1, 0, KEY_UP),	KEY(1, 1, KEY_ENTER),	KEY(1, 2, KEY_DOWN),
+	KEY(2, 0, KEY_RIGHT),	KEY(2, 1, KEY_C),	KEY(2, 2, KEY_D),
+};
+
+static struct matrix_keymap_data cm_t35_keymap_data = {
+	.keymap			= cm_t35_keymap,
+	.keymap_size		= ARRAY_SIZE(cm_t35_keymap),
+};
+
+static struct twl4030_keypad_data cm_t35_kp_data = {
+	.keymap_data	= &cm_t35_keymap_data,
+	.rows		= 3,
+	.cols		= 3,
+	.rep		= 1,
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.transceiver	= 1,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.ocr_mask	= 0x00100000,	/* 3.3V */
+	},
+	{}	/* Terminator */
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
+				 unsigned ngpio)
+{
+	int wlan_rst = gpio + 2;
+
+	if ((gpio_request(wlan_rst, "WLAN RST") == 0) &&
+	    (gpio_direction_output(wlan_rst, 1) == 0)) {
+		gpio_export(wlan_rst, 0);
+
+		udelay(10);
+		gpio_set_value(wlan_rst, 0);
+		udelay(10);
+		gpio_set_value(wlan_rst, 1);
+	} else {
+		pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
+	}
+
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters */
+	cm_t35_vmmc1_supply.dev = mmc[0].dev;
+	cm_t35_vsim_supply.dev = mmc[0].dev;
+
+	/* setup USB with proper PHY reset GPIOs */
+	ehci_pdata.reset_gpio_port[0] = gpio + 6;
+	ehci_pdata.reset_gpio_port[1] = gpio + 7;
+
+	usb_ehci_init(&ehci_pdata);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup          = cm_t35_twl_gpio_setup,
+};
+
+static struct twl4030_platform_data cm_t35_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.keypad		= &cm_t35_kp_data,
+	.usb		= &cm_t35_usb_data,
+	.gpio		= &cm_t35_gpio_data,
+	.vmmc1		= &cm_t35_vmmc1,
+	.vsim		= &cm_t35_vsim,
+};
+
+static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tps65930", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &cm_t35_twldata,
+	},
+};
+
+static void __init cm_t35_init_i2c(void)
+{
+	omap_register_i2c_bus(1, 2600, cm_t35_i2c_boardinfo,
+			      ARRAY_SIZE(cm_t35_i2c_boardinfo));
+}
+
+static struct omap_board_config_kernel cm_t35_config[] __initdata = {
+};
+
+static void __init cm_t35_init_irq(void)
+{
+	omap_board_config = cm_t35_config;
+	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
+
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init cm_t35_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+static struct omap_board_mux board_mux[] __initdata = {
+	/* nCS and IRQ for CM-T35 ethernet */
+	OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
+	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
+	/* nCS and IRQ for SB-T35 ethernet */
+	OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0),
+	OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
+	/* PENDOWN GPIO */
+	OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
+	/* mUSB */
+	OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* MMC 2 */
+	OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+
+	/* McSPI 1 */
+	OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+
+	/* McSPI 4 */
+	OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
+
+	/* McBSP 2 */
+	OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+	/* serial ports */
+	OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* DSS */
+	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+	/* TPS IRQ */
+	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
+		  OMAP_PIN_INPUT_PULLUP),
+
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+static void __init cm_t35_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
+	omap_serial_init();
+	cm_t35_init_i2c();
+	cm_t35_init_nand();
+	cm_t35_init_ads7846();
+	cm_t35_init_ethernet();
+	cm_t35_init_led();
+
+	usb_musb_init();
+}
+
+MACHINE_START(CM_T35, "Compulab CM-T35")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= cm_t35_map_io,
+	.init_irq	= cm_t35_init_irq,
+	.init_machine	= cm_t35_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 2e09a1c444cb..7e6e6ca88be5 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -26,10 +26,10 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static struct omap_board_config_kernel generic_config[] = {
 };
@@ -56,7 +56,7 @@ static void __init omap_generic_map_io(void)
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_generic_map_io,
 	.init_irq	= omap_generic_init_irq,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index eaa02d012c5c..cfb7f1257d20 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -31,16 +31,16 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/control.h>
+#include <plat/control.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/keypad.h>
-#include <mach/menelaus.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/keypad.h>
+#include <plat/menelaus.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
 
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1
@@ -376,7 +376,7 @@ static void __init omap_h4_map_io(void)
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_h4_map_io,
 	.init_irq	= omap_h4_init_irq,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
new file mode 100644
index 000000000000..44239e3ec02e
--- /dev/null
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -0,0 +1,260 @@
+/*
+ * Copyright (C) 2009 Integration Software and Electronic Engineering.
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl4030.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+
+#include "mux.h"
+#include "mmc-twl4030.h"
+
+#define IGEP2_SMSC911X_CS       5
+#define IGEP2_SMSC911X_GPIO     176
+#define IGEP2_GPIO_USBH_NRESET  24
+#define IGEP2_GPIO_LED0_RED 	26
+#define IGEP2_GPIO_LED0_GREEN 	27
+#define IGEP2_GPIO_LED1_RED   	28
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+
+#include <linux/smsc911x.h>
+
+static struct smsc911x_platform_config igep2_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS  ,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource igep2_smsc911x_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO),
+		.end	= OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device igep2_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(igep2_smsc911x_resources),
+	.resource	= igep2_smsc911x_resources,
+	.dev		= {
+		.platform_data = &igep2_smsc911x_config,
+	},
+};
+
+static inline void __init igep2_init_smsc911x(void)
+{
+	unsigned long cs_mem_base;
+
+	if (gpmc_cs_request(IGEP2_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) {
+		pr_err("IGEP v2: Failed request for GPMC mem for smsc911x\n");
+		gpmc_cs_free(IGEP2_SMSC911X_CS);
+		return;
+	}
+
+	igep2_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	igep2_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+
+	if ((gpio_request(IGEP2_SMSC911X_GPIO, "SMSC911X IRQ") == 0) &&
+	    (gpio_direction_input(IGEP2_SMSC911X_GPIO) == 0)) {
+		gpio_export(IGEP2_SMSC911X_GPIO, 0);
+	} else {
+		pr_err("IGEP v2: Could not obtain gpio for for SMSC911X IRQ\n");
+		return;
+	}
+
+	platform_device_register(&igep2_smsc911x_device);
+}
+
+#else
+static inline void __init igep2_init_smsc911x(void) { }
+#endif
+
+static struct omap_board_config_kernel igep2_config[] __initdata = {
+};
+
+static struct regulator_consumer_supply igep2_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data igep2_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &igep2_vmmc1_supply,
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{}      /* Terminator */
+};
+
+static int igep2_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	*/
+	igep2_vmmc1_supply.dev = mmc[0].dev;
+
+	return 0;
+};
+
+static struct twl4030_gpio_platform_data igep2_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= false,
+	.setup		= igep2_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data igep2_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static void __init igep2_init_irq(void)
+{
+	omap_board_config = igep2_config;
+	omap_board_config_size = ARRAY_SIZE(igep2_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct twl4030_platform_data igep2_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.usb		= &igep2_usb_data,
+	.gpio		= &igep2_gpio_data,
+	.vmmc1          = &igep2_vmmc1,
+
+};
+
+static struct i2c_board_info __initdata igep2_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &igep2_twldata,
+	},
+};
+
+static int __init igep2_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, igep2_i2c_boardinfo,
+			ARRAY_SIZE(igep2_i2c_boardinfo));
+	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz */
+	omap_register_i2c_bus(3, 100, NULL, 0);
+	return 0;
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
+static void __init igep2_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	igep2_i2c_init();
+	omap_serial_init();
+	usb_musb_init();
+
+	igep2_init_smsc911x();
+
+	/* GPIO userspace leds */
+	if ((gpio_request(IGEP2_GPIO_LED0_RED, "GPIO_LED0_RED") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED0_RED, 0);
+		gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
+
+	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "GPIO_LED0_GREEN") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
+		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
+
+	if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED1_RED, 0);
+		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
+}
+
+static void __init igep2_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(IGEP0020, "IGEP v2 board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= igep2_map_io,
+	.init_irq	= igep2_init_irq,
+	.init_machine	= igep2_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d57ec2f4d0a9..37431738f1c2 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -33,16 +33,17 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 #include <mach/gpio.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
 
 #include <asm/delay.h>
-#include <mach/control.h>
-#include <mach/usb.h>
+#include <plat/control.h>
+#include <plat/usb.h>
 
+#include "mux.h"
 #include "mmc-twl4030.h"
 
 #define LDP_SMSC911X_CS		1
@@ -374,8 +375,17 @@ static struct platform_device *ldp_devices[] __initdata = {
 	&ldp_gpio_keys_device,
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_ldp_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	ts_gpio = 54;
@@ -399,7 +409,7 @@ static void __init omap_ldp_map_io(void)
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_ldp_map_io,
 	.init_irq	= omap_ldp_init_irq,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 8341632d260b..764ab1ed576d 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -23,12 +23,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/irqs.h>
-#include <mach/mcspi.h>
-#include <mach/onenand.h>
-#include <mach/serial.h>
+#include <plat/mcspi.h>
+#include <plat/onenand.h>
+#include <plat/serial.h>
 
 static struct omap2_mcspi_device_config p54spi_mcspi_config = {
 	.turbo_mode	= 0,
@@ -121,7 +121,7 @@ static void __init n8x0_init_machine(void)
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.init_irq	= n8x0_init_irq,
@@ -131,7 +131,7 @@ MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.init_irq	= n8x0_init_irq,
@@ -141,7 +141,7 @@ MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.init_irq	= n8x0_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 08b0816afa61..6ada8029f9a8 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -37,14 +37,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
-#include <mach/nand.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/timer-gp.h>
-
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
+
+#include "mux.h"
 #include "mmc-twl4030.h"
 
 #define GPMC_CS0_BASE  0x60
@@ -140,10 +140,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
 	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
-		omap_cfg_reg(AG9_34XX_GPIO23);
+		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
 		mmc[0].gpio_wp = 23;
 	} else {
-		omap_cfg_reg(AH8_34XX_GPIO29);
+		omap_mux_init_gpio(29, OMAP_PIN_INPUT);
 	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
@@ -254,6 +254,15 @@ static struct twl4030_usb_data beagle_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
+static struct twl4030_codec_audio_data beagle_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data beagle_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &beagle_audio_data,
+};
+
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -261,6 +270,7 @@ static struct twl4030_platform_data beagle_twldata = {
 	/* platform_data for children goes here */
 	.usb		= &beagle_usb_data,
 	.gpio		= &beagle_gpio_data,
+	.codec		= &beagle_codec_data,
 	.vmmc1		= &beagle_vmmc1,
 	.vsim		= &beagle_vsim,
 	.vdac		= &beagle_vdac,
@@ -400,24 +410,46 @@ static void __init omap3beagle_flash_init(void)
 	}
 }
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = 147,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap3_beagle_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3_beagle_i2c_init();
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
 	omap_serial_init();
 
-	omap_cfg_reg(J25_34XX_GPIO170);
+	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
 	gpio_request(170, "DVI_nPD");
 	/* REVISIT leave DVI powered down until it's needed ... */
 	gpio_direction_output(170, true);
 
 	usb_musb_init();
+	usb_ehci_init(&ehci_pdata);
 	omap3beagle_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_cfg_reg(H16_34XX_SDRC_CKE0);
-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
 static void __init omap3_beagle_map_io(void)
@@ -429,7 +461,7 @@ static void __init omap3_beagle_map_io(void)
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_beagle_map_io,
 	.init_irq	= omap3_beagle_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 4c4d7f8dbd72..18913e96e34d 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -22,34 +22,74 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/leds.h>
+#include <linux/interrupt.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/usb/otg.h>
+#include <linux/smsc911x.h>
+
+#include <linux/regulator/machine.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/common.h>
-#include <mach/mcspi.h>
+#include <plat/board.h>
+#include <plat/usb.h>
+#include <plat/common.h>
+#include <plat/mcspi.h>
 
+#include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OMAP3_EVM_TS_GPIO	175
+#define OMAP3_EVM_EHCI_VBUS	22
+#define OMAP3_EVM_EHCI_SELECT	61
 
 #define OMAP3EVM_ETHR_START	0x2c000000
 #define OMAP3EVM_ETHR_SIZE	1024
+#define OMAP3EVM_ETHR_ID_REV	0x50
 #define OMAP3EVM_ETHR_GPIO_IRQ	176
-#define OMAP3EVM_SMC911X_CS	5
+#define OMAP3EVM_SMSC911X_CS	5
+
+static u8 omap3_evm_version;
+
+u8 get_omap3_evm_rev(void)
+{
+	return omap3_evm_version;
+}
+EXPORT_SYMBOL(get_omap3_evm_rev);
+
+static void __init omap3_evm_get_revision(void)
+{
+	void __iomem *ioaddr;
+	unsigned int smsc_id;
+
+	/* Ethernet PHY ID is stored at ID_REV register */
+	ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K);
+	if (!ioaddr)
+		return;
+	smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000;
+	iounmap(ioaddr);
+
+	switch (smsc_id) {
+	/*SMSC9115 chipset*/
+	case 0x01150000:
+		omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
+		break;
+	/*SMSC 9220 chipset*/
+	case 0x92200000:
+	default:
+		omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
+	}
+}
 
-static struct resource omap3evm_smc911x_resources[] = {
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct resource omap3evm_smsc911x_resources[] = {
 	[0] =	{
 		.start	= OMAP3EVM_ETHR_START,
 		.end	= (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
@@ -58,24 +98,34 @@ static struct resource omap3evm_smc911x_resources[] = {
 	[1] =	{
 		.start	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
 		.end	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= (IORESOURCE_IRQ | IRQF_TRIGGER_LOW),
 	},
 };
 
-static struct platform_device omap3evm_smc911x_device = {
-	.name		= "smc911x",
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface  = PHY_INTERFACE_MODE_MII,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags          = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS),
+};
+
+static struct platform_device omap3evm_smsc911x_device = {
+	.name		= "smsc911x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(omap3evm_smc911x_resources),
-	.resource	= &omap3evm_smc911x_resources[0],
+	.num_resources	= ARRAY_SIZE(omap3evm_smsc911x_resources),
+	.resource	= &omap3evm_smsc911x_resources[0],
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
 };
 
-static inline void __init omap3evm_init_smc911x(void)
+static inline void __init omap3evm_init_smsc911x(void)
 {
 	int eth_cs;
 	struct clk *l3ck;
 	unsigned int rate;
 
-	eth_cs = OMAP3EVM_SMC911X_CS;
+	eth_cs = OMAP3EVM_SMSC911X_CS;
 
 	l3ck = clk_get(NULL, "l3_ck");
 	if (IS_ERR(l3ck))
@@ -83,15 +133,58 @@ static inline void __init omap3evm_init_smc911x(void)
 	else
 		rate = clk_get_rate(l3ck);
 
-	if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+	if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMSC911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
 			OMAP3EVM_ETHR_GPIO_IRQ);
 		return;
 	}
 
 	gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+	platform_device_register(&omap3evm_smsc911x_device);
 }
 
+#else
+static inline void __init omap3evm_init_smsc911x(void) { return; }
+#endif
+
+static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply omap3evm_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data omap3evm_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3evm_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data omap3evm_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3evm_vsim_supply,
+};
+
 static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -130,10 +223,14 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	omap_cfg_reg(L8_34XX_GPIO63);
+	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 
+	/* link regulators to MMC adapters */
+	omap3evm_vmmc1_supply.dev = mmc[0].dev;
+	omap3evm_vsim_supply.dev = mmc[0].dev;
+
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
 	 * the P2 connector; notably LEDA for the LCD backlight.
@@ -194,6 +291,15 @@ static struct twl4030_madc_platform_data omap3evm_madc_data = {
 	.irq_line	= 1,
 };
 
+static struct twl4030_codec_audio_data omap3evm_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data omap3evm_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &omap3evm_audio_data,
+};
+
 static struct twl4030_platform_data omap3evm_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -203,6 +309,7 @@ static struct twl4030_platform_data omap3evm_twldata = {
 	.madc		= &omap3evm_madc_data,
 	.usb		= &omap3evm_usb_data,
 	.gpio		= &omap3evm_gpio_data,
+	.codec		= &omap3evm_codec_data,
 };
 
 static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
@@ -216,6 +323,13 @@ static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
 
 static int __init omap3_evm_i2c_init(void)
 {
+	/*
+	 * REVISIT: These entries can be set in omap3evm_twl_data
+	 * after a merge with MFD tree
+	 */
+	omap3evm_twldata.vmmc1 = &omap3evm_vmmc1;
+	omap3evm_twldata.vsim = &omap3evm_vsim;
+
 	omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
 			ARRAY_SIZE(omap3evm_i2c_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
@@ -289,16 +403,38 @@ static void __init omap3_evm_init_irq(void)
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
-	omap3evm_init_smc911x();
 }
 
 static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_lcd_device,
-	&omap3evm_smc911x_device,
 };
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	/* PHY reset GPIO will be runtime programmed based on EVM version */
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap3_evm_init(void)
 {
+	omap3_evm_get_revision();
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
 	omap3_evm_i2c_init();
 
 	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
@@ -311,8 +447,32 @@ static void __init omap3_evm_init(void)
 	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
 	usb_nop_xceiv_register();
 #endif
+	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
+		/* enable EHCI VBUS using GPIO22 */
+		omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
+		gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
+		gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
+		gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
+
+		/* Select EHCI port on main board */
+		omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP);
+		gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
+		gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
+		gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
+
+		/* setup EHCI phy reset config */
+		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
+		ehci_pdata.reset_gpio_port[1] = 21;
+
+	} else {
+		/* setup EHCI phy reset on MDC */
+		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
+		ehci_pdata.reset_gpio_port[1] = 135;
+	}
 	usb_musb_init();
+	usb_ehci_init(&ehci_pdata);
 	ads7846_dev_init();
+	omap3evm_init_smsc911x();
 }
 
 static void __init omap3_evm_map_io(void)
@@ -324,7 +484,7 @@ static void __init omap3_evm_map_io(void)
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_evm_map_io,
 	.init_irq	= omap3_evm_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7519edb69155..6f6c601eeab7 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -34,14 +34,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
 #include <mach/hardware.h>
-#include <mach/mcspi.h>
-#include <mach/usb.h>
-#include <mach/mux.h>
+#include <plat/mcspi.h>
+#include <plat/usb.h>
 
+#include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
@@ -98,10 +98,10 @@ static struct gpio_keys_button pandora_gpio_keys[] = {
 	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
 	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
 	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
-	GPIO_BUTTON_LOW(111,	BTN_A,		"a"),
-	GPIO_BUTTON_LOW(106,	BTN_B,		"b"),
-	GPIO_BUTTON_LOW(109,	BTN_X,		"x"),
-	GPIO_BUTTON_LOW(101,	BTN_Y,		"y"),
+	GPIO_BUTTON_LOW(109,	KEY_KP1,	"game 1"),
+	GPIO_BUTTON_LOW(111,	KEY_KP2,	"game 2"),
+	GPIO_BUTTON_LOW(106,	KEY_KP3,	"game 3"),
+	GPIO_BUTTON_LOW(101,	KEY_KP4,	"game 4"),
 	GPIO_BUTTON_LOW(102,	BTN_TL,		"l"),
 	GPIO_BUTTON_LOW(97,	BTN_TL2,	"l2"),
 	GPIO_BUTTON_LOW(105,	BTN_TR,		"r"),
@@ -281,11 +281,21 @@ static struct twl4030_usb_data omap3pandora_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
+static struct twl4030_codec_audio_data omap3pandora_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data omap3pandora_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &omap3pandora_audio_data,
+};
+
 static struct twl4030_platform_data omap3pandora_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &omap3pandora_gpio_data,
 	.usb		= &omap3pandora_usb_data,
+	.codec		= &omap3pandora_codec_data,
 	.vmmc1		= &pandora_vmmc1,
 	.vmmc2		= &pandora_vmmc2,
 	.keypad		= &pandora_kp_data,
@@ -305,7 +315,7 @@ static int __init omap3pandora_i2c_init(void)
 	omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo,
 			ARRAY_SIZE(omap3pandora_i2c_boardinfo));
 	/* i2c2 pins are not connected */
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(3, 100, NULL, 0);
 	return 0;
 }
 
@@ -358,23 +368,8 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 	}
 };
 
-static struct platform_device omap3pandora_lcd_device = {
-	.name		= "pandora_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config omap3pandora_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
-static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&omap3pandora_lcd_config },
-};
-
 static void __init omap3pandora_init_irq(void)
 {
-	omap_board_config = omap3pandora_config;
-	omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
@@ -382,13 +377,33 @@ static void __init omap3pandora_init_irq(void)
 }
 
 static struct platform_device *omap3pandora_devices[] __initdata = {
-	&omap3pandora_lcd_device,
 	&pandora_leds_gpio,
 	&pandora_keys_gpio,
 };
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 16,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap3pandora_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3pandora_i2c_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));
@@ -396,12 +411,13 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
+	usb_ehci_init(&ehci_pdata);
 	pandora_keys_gpio_init();
 	usb_musb_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_cfg_reg(H16_34XX_SDRC_CKE0);
-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
 static void __init omap3pandora_map_io(void)
@@ -412,7 +428,7 @@ static void __init omap3pandora_map_io(void)
 
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3pandora_map_io,
 	.init_irq	= omap3pandora_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
new file mode 100644
index 000000000000..c9e5ebb4d91d
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -0,0 +1,572 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3touchbook.c
+ *
+ * Copyright (C) 2009 Always Innovating
+ *
+ * Modified from mach-omap2/board-omap3beagleboard.c
+ *
+ * Initial code: Grégoire Gentil, Tim Yamin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <plat/mcspi.h>
+#include <linux/spi/spi.h>
+
+#include <linux/spi/ads7846.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
+
+#include "mux.h"
+#include "mmc-twl4030.h"
+
+#include <asm/setup.h>
+
+#define GPMC_CS0_BASE  0x60
+#define GPMC_CS_SIZE   0x30
+
+#define NAND_BLOCK_SIZE		SZ_128K
+
+#define OMAP3_AC_GPIO		136
+#define OMAP3_TS_GPIO		162
+#define TB_BL_PWM_TIMER		9
+#define TB_KILL_POWER_GPIO	168
+
+unsigned long touchbook_revision;
+
+static struct mtd_partition omap3touchbook_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader",
+		.offset		= 0,
+		.size		= 4 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot Env",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size		= 1 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "File System",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data omap3touchbook_nand_data = {
+	.options	= NAND_BUSWIDTH_16,
+	.parts		= omap3touchbook_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(omap3touchbook_nand_partitions),
+	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
+	.nand_setup	= NULL,
+	.dev_ready	= NULL,
+};
+
+static struct resource omap3touchbook_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device omap3touchbook_nand_device = {
+	.name		= "omap2-nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &omap3touchbook_nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &omap3touchbook_nand_resource,
+};
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 8,
+		.gpio_wp	= 29,
+	},
+	{}	/* Terminator */
+};
+
+static struct platform_device omap3_touchbook_lcd_device = {
+	.name		= "omap3touchbook_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct regulator_consumer_supply touchbook_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply touchbook_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+static struct gpio_led gpio_leds[];
+
+static int touchbook_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+		mmc[0].gpio_wp = 23;
+	} else {
+		omap_mux_init_gpio(29, OMAP_PIN_INPUT);
+	}
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters */
+	touchbook_vmmc1_supply.dev = mmc[0].dev;
+	touchbook_vsim_supply.dev = mmc[0].dev;
+
+	/* REVISIT: need ehci-omap hooks for external VBUS
+	 * power switch and overcurrent detect
+	 */
+
+	gpio_request(gpio + 1, "EHCI_nOC");
+	gpio_direction_input(gpio + 1);
+
+	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+	gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
+	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+
+	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data touchbook_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.pullups	= BIT(1),
+	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+				| BIT(15) | BIT(16) | BIT(17),
+	.setup		= touchbook_twl_gpio_setup,
+};
+
+static struct regulator_consumer_supply touchbook_vdac_supply = {
+	.supply		= "vdac",
+	.dev		= &omap3_touchbook_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply touchbook_vdvi_supply = {
+	.supply		= "vdvi",
+	.dev		= &omap3_touchbook_lcd_device.dev,
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data touchbook_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &touchbook_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data touchbook_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &touchbook_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data touchbook_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &touchbook_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data touchbook_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &touchbook_vdvi_supply,
+};
+
+static struct twl4030_usb_data touchbook_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_codec_audio_data touchbook_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data touchbook_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &touchbook_audio_data,
+};
+
+static struct twl4030_platform_data touchbook_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.usb		= &touchbook_usb_data,
+	.gpio		= &touchbook_gpio_data,
+	.codec		= &touchbook_codec_data,
+	.vmmc1		= &touchbook_vmmc1,
+	.vsim		= &touchbook_vsim,
+	.vdac		= &touchbook_vdac,
+	.vpll2		= &touchbook_vpll2,
+};
+
+static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &touchbook_twldata,
+	},
+};
+
+static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("bq27200", 0x55),
+	},
+};
+
+static int __init omap3_touchbook_i2c_init(void)
+{
+	/* Standard TouchBook bus */
+	omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo,
+			ARRAY_SIZE(touchbook_i2c_boardinfo));
+
+	/* Additional TouchBook bus */
+	omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
+			ARRAY_SIZE(touchBook_i2c_boardinfo));
+
+	return 0;
+}
+
+static void __init omap3_ads7846_init(void)
+{
+	if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) {
+		printk(KERN_ERR "Failed to request GPIO %d for "
+				"ads7846 pen down IRQ\n", OMAP3_TS_GPIO);
+		return;
+	}
+
+	gpio_direction_input(OMAP3_TS_GPIO);
+	omap_set_gpio_debounce(OMAP3_TS_GPIO, 1);
+	omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_min			= 100,
+	.y_min			= 265,
+	.x_max			= 3950,
+	.y_max			= 3750,
+	.x_plate_ohms		= 40,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 5,
+	.debounce_rep		= 1,
+	.gpio_pendown		= OMAP3_TS_GPIO,
+	.keep_vref_on		= 1,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = {
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 4,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OMAP3_TS_GPIO),
+		.platform_data		= &ads7846_config,
+	}
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "touchbook::usr0",
+		.default_trigger	= "heartbeat",
+		.gpio			= 150,
+	},
+	{
+		.name			= "touchbook::usr1",
+		.default_trigger	= "mmc0",
+		.gpio			= 149,
+	},
+	{
+		.name			= "touchbook::pmu_stat",
+		.gpio			= -EINVAL,	/* gets replaced */
+		.active_low		= true,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+	{
+		.code			= BTN_EXTRA,
+		.gpio			= 7,
+		.desc			= "user",
+		.wakeup			= 1,
+	},
+	{
+		.code			= KEY_POWER,
+		.gpio			= 183,
+		.desc			= "power",
+		.wakeup			= 1,
+	},
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_key_info,
+	},
+};
+
+static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = {
+	{ OMAP_TAG_LCD,		&omap3_touchbook_lcd_config },
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
+static void __init omap3_touchbook_init_irq(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_board_config = omap3_touchbook_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(12);
+#endif
+	omap_gpio_init();
+}
+
+static struct platform_device *omap3_touchbook_devices[] __initdata = {
+	&omap3_touchbook_lcd_device,
+	&leds_gpio,
+	&keys_gpio,
+};
+
+static void __init omap3touchbook_flash_init(void)
+{
+	u8 cs = 0;
+	u8 nandcs = GPMC_CS_NUM + 1;
+
+	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+	/* find out the chip-select on which NAND exists */
+	while (cs < GPMC_CS_NUM) {
+		u32 ret = 0;
+		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		if ((ret & 0xC00) == 0x800) {
+			printk(KERN_INFO "Found NAND on CS%d\n", cs);
+			if (nandcs > GPMC_CS_NUM)
+				nandcs = cs;
+		}
+		cs++;
+	}
+
+	if (nandcs > GPMC_CS_NUM) {
+		printk(KERN_INFO "NAND: Unable to find configuration "
+				 "in GPMC\n ");
+		return;
+	}
+
+	if (nandcs < GPMC_CS_NUM) {
+		omap3touchbook_nand_data.cs = nandcs;
+		omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *)
+			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+		omap3touchbook_nand_data.gpmc_baseaddr =
+						(void *) (gpmc_base_add);
+
+		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+		if (platform_device_register(&omap3touchbook_nand_device) < 0)
+			printk(KERN_ERR "Unable to register NAND device\n");
+	}
+}
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = 147,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static void omap3_touchbook_poweroff(void)
+{
+	int r;
+
+	r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset");
+	if (r < 0) {
+		printk(KERN_ERR "Unable to get kill power GPIO\n");
+		return;
+	}
+
+	gpio_direction_output(TB_KILL_POWER_GPIO, 0);
+}
+
+static void __init early_touchbook_revision(char **p)
+{
+	if (!*p)
+		return;
+
+	strict_strtoul(*p, 10, &touchbook_revision);
+}
+__early_param("tbr=", early_touchbook_revision);
+
+static void __init omap3_touchbook_init(void)
+{
+	pm_power_off = omap3_touchbook_poweroff;
+
+	omap3_touchbook_i2c_init();
+	platform_add_devices(omap3_touchbook_devices,
+			ARRAY_SIZE(omap3_touchbook_devices));
+	omap_serial_init();
+
+	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
+	gpio_request(176, "DVI_nPD");
+	/* REVISIT leave DVI powered down until it's needed ... */
+	gpio_direction_output(176, true);
+
+	/* Touchscreen and accelerometer */
+	spi_register_board_info(omap3_ads7846_spi_board_info,
+				ARRAY_SIZE(omap3_ads7846_spi_board_info));
+	omap3_ads7846_init();
+	usb_musb_init();
+	usb_ehci_init(&ehci_pdata);
+	omap3touchbook_flash_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+}
+
+static void __init omap3_touchbook_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
+	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_touchbook_map_io,
+	.init_irq	= omap3_touchbook_init_irq,
+	.init_machine	= omap3_touchbook_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 9917d2fddc2f..5b78a87217e0 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -38,15 +38,15 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 #include <mach/hardware.h>
-#include <mach/nand.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
 
+#include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
@@ -67,7 +67,7 @@
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
@@ -329,6 +329,15 @@ static struct regulator_init_data overo_vmmc1 = {
 	.consumer_supplies	= &overo_vmmc1_supply,
 };
 
+static struct twl4030_codec_audio_data overo_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data overo_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &overo_audio_data,
+};
+
 /* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
 
 static struct twl4030_platform_data overo_twldata = {
@@ -336,6 +345,7 @@ static struct twl4030_platform_data overo_twldata = {
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &overo_gpio_data,
 	.usb		= &overo_usb_data,
+	.codec		= &overo_codec_data,
 	.vmmc1		= &overo_vmmc1,
 };
 
@@ -384,19 +394,40 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = OVERO_GPIO_USBH_NRESET,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init overo_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	overo_i2c_init();
 	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init();
+	usb_ehci_init(&ehci_pdata);
 	overo_ads7846_init();
 	overo_init_smsc911x();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_cfg_reg(H16_34XX_SDRC_CKE0);
-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 
 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
 			  "OVERO_GPIO_W2W_NRESET") == 0) &&
@@ -433,14 +464,6 @@ static void __init overo_init(void)
 	else
 		printk(KERN_ERR "could not obtain gpio for "
 					"OVERO_GPIO_USBH_CPEN\n");
-
-	if ((gpio_request(OVERO_GPIO_USBH_NRESET,
-			  "OVERO_GPIO_USBH_NRESET") == 0) &&
-	    (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0))
-		gpio_export(OVERO_GPIO_USBH_NRESET, 0);
-	else
-		printk(KERN_ERR "could not obtain gpio for "
-					"OVERO_GPIO_USBH_NRESET\n");
 }
 
 static void __init overo_map_io(void)
@@ -451,7 +474,7 @@ static void __init overo_map_io(void)
 
 MACHINE_START(OVERO, "Gumstix Overo")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= overo_map_io,
 	.init_irq	= overo_init_irq,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e34d96a825e3..bf26ad31f9ba 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -14,28 +14,138 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/wl12xx.h>
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
+#include <linux/gpio_keys.h>
 #include <linux/mmc/host.h>
 
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
-#include <mach/onenand.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
+#include <plat/onenand.h>
+#include <plat/gpmc-smc91x.h>
 
+#include "mux.h"
 #include "mmc-twl4030.h"
 
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
 
+#define RX51_WL1251_POWER_GPIO		87
+#define RX51_WL1251_IRQ_GPIO		42
+
+/* list all spi devices here */
+enum {
+	RX51_SPI_WL1251,
+};
+
+static struct wl12xx_platform_data wl1251_pdata;
+
+static struct omap2_mcspi_device_config wl1251_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,
+};
+
+static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
+	[RX51_SPI_WL1251] = {
+		.modalias		= "wl1251",
+		.bus_num		= 4,
+		.chip_select		= 0,
+		.max_speed_hz   	= 48000000,
+		.mode                   = SPI_MODE_3,
+		.controller_data	= &wl1251_mcspi_config,
+		.platform_data		= &wl1251_pdata,
+	},
+};
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+
+#define RX51_GPIO_CAMERA_LENS_COVER	110
+#define RX51_GPIO_CAMERA_FOCUS		68
+#define RX51_GPIO_CAMERA_CAPTURE	69
+#define RX51_GPIO_KEYPAD_SLIDE		71
+#define RX51_GPIO_LOCK_BUTTON		113
+#define RX51_GPIO_PROXIMITY		89
+
+#define RX51_GPIO_DEBOUNCE_TIMEOUT	10
+
+static struct gpio_keys_button rx51_gpio_keys[] = {
+	{
+		.desc			= "Camera Lens Cover",
+		.type			= EV_SW,
+		.code			= SW_CAMERA_LENS_COVER,
+		.gpio			= RX51_GPIO_CAMERA_LENS_COVER,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Camera Focus",
+		.type			= EV_KEY,
+		.code			= KEY_CAMERA_FOCUS,
+		.gpio			= RX51_GPIO_CAMERA_FOCUS,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Camera Capture",
+		.type			= EV_KEY,
+		.code			= KEY_CAMERA,
+		.gpio			= RX51_GPIO_CAMERA_CAPTURE,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Lock Button",
+		.type			= EV_KEY,
+		.code			= KEY_SCREENLOCK,
+		.gpio			= RX51_GPIO_LOCK_BUTTON,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Keypad Slide",
+		.type			= EV_SW,
+		.code			= SW_KEYPAD_SLIDE,
+		.gpio			= RX51_GPIO_KEYPAD_SLIDE,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Proximity Sensor",
+		.type			= EV_SW,
+		.code			= SW_FRONT_PROXIMITY,
+		.gpio			= RX51_GPIO_PROXIMITY,
+		.active_low		= 0,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}
+};
+
+static struct gpio_keys_platform_data rx51_gpio_keys_data = {
+	.buttons	= rx51_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(rx51_gpio_keys),
+};
+
+static struct platform_device rx51_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &rx51_gpio_keys_data,
+	},
+};
+
+static void __init rx51_add_gpio_keys(void)
+{
+	platform_device_register(&rx51_gpio_keys_device);
+}
+#else
+static void __init rx51_add_gpio_keys(void)
+{
+}
+#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
+
 static int board_keymap[] = {
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_O),
@@ -521,9 +631,9 @@ static struct omap_smc91x_platform_data board_smc91x_data = {
 
 static void __init board_smc91x_init(void)
 {
-	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
-	omap_cfg_reg(G25_34XX_GPIO86_OUT);
-	omap_cfg_reg(H19_34XX_GPIO164_OUT);
+	omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN);
+	omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
 
 	gpmc_smc91x_init(&board_smc91x_data);
 }
@@ -536,10 +646,64 @@ static inline void board_smc91x_init(void)
 
 #endif
 
+static void rx51_wl1251_set_power(bool enable)
+{
+	gpio_set_value(RX51_WL1251_POWER_GPIO, enable);
+}
+
+static void __init rx51_init_wl1251(void)
+{
+	int irq, ret;
+
+	ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power");
+	if (ret < 0)
+		goto error;
+
+	ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0);
+	if (ret < 0)
+		goto err_power;
+
+	ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq");
+	if (ret < 0)
+		goto err_power;
+
+	ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO);
+	if (ret < 0)
+		goto err_irq;
+
+	irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO);
+	if (irq < 0)
+		goto err_irq;
+
+	wl1251_pdata.set_power = rx51_wl1251_set_power;
+	rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
+
+	return;
+
+err_irq:
+	gpio_free(RX51_WL1251_IRQ_GPIO);
+
+err_power:
+	gpio_free(RX51_WL1251_POWER_GPIO);
+
+error:
+	printk(KERN_ERR "wl1251 board initialisation failed\n");
+	wl1251_pdata.set_power = NULL;
+
+	/*
+	 * Now rx51_peripherals_spi_board_info[1].irq is zero and
+	 * set_power is null, and wl1251_probe() will fail.
+	 */
+}
+
 void __init rx51_peripherals_init(void)
 {
 	rx51_i2c_init();
 	board_onenand_init();
 	board_smc91x_init();
+	rx51_add_gpio_keys();
+	rx51_init_wl1251();
+	spi_register_board_info(rx51_peripherals_spi_board_info,
+				ARRAY_SIZE(rx51_peripherals_spi_board_info));
 }
 
diff --git a/arch/arm/mach-omap2/board-rx51-sdram.c b/arch/arm/mach-omap2/board-rx51-sdram.c
new file mode 100644
index 000000000000..f392844195d2
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rx51-sdram.c
@@ -0,0 +1,221 @@
+/*
+ * SDRC register values for RX51
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ *
+ * Original code by Juha Yrjola <juha.yrjola@solidboot.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/io.h>
+#include <plat/common.h>
+#include <plat/clock.h>
+#include <plat/sdrc.h>
+
+
+/* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
+struct sdram_timings {
+	u32 casl;
+	u32 tDAL;
+	u32 tDPL;
+	u32 tRRD;
+	u32 tRCD;
+	u32 tRP;
+	u32 tRAS;
+	u32 tRC;
+	u32 tRFC;
+	u32 tXSR;
+
+	u32 tREF; /* in ns */
+
+	u32 tXP;
+	u32 tCKE;
+	u32 tWTR;
+};
+
+struct omap_sdrc_params rx51_sdrc_params[4];
+
+static const struct sdram_timings rx51_timings[] = {
+	{
+		.casl = 3,
+		.tDAL = 33000,
+		.tDPL = 15000,
+		.tRRD = 12000,
+		.tRCD = 22500,
+		.tRP = 18000,
+		.tRAS = 42000,
+		.tRC = 66000,
+		.tRFC = 138000,
+		.tXSR = 200000,
+
+		.tREF = 7800,
+
+		.tXP = 2,
+		.tCKE = 2,
+		.tWTR = 2
+	},
+};
+
+static unsigned long sdrc_get_fclk_period(long rate)
+{
+	/* In picoseconds */
+	return 1000000000 / rate;
+}
+
+static unsigned int sdrc_ps_to_ticks(unsigned int time_ps, long rate)
+{
+	unsigned long tick_ps;
+
+	/* Calculate in picosecs to yield more exact results */
+	tick_ps = sdrc_get_fclk_period(rate);
+
+	return (time_ps + tick_ps - 1) / tick_ps;
+}
+#undef DEBUG
+#ifdef DEBUG
+static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
+				int ticks, long rate, const char *name)
+#else
+static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
+			       int ticks)
+#endif
+{
+	int mask, nr_bits;
+
+	nr_bits = end_bit - st_bit + 1;
+	if (ticks >= 1 << nr_bits)
+		return -1;
+	mask = (1 << nr_bits) - 1;
+	*regval &= ~(mask << st_bit);
+	*regval |= ticks << st_bit;
+#ifdef DEBUG
+	printk(KERN_INFO "SDRC %s: %i ticks %i ns\n", name, ticks,
+			(unsigned int)sdrc_get_fclk_period(rate) * ticks /
+			1000);
+#endif
+
+	return 0;
+}
+
+#ifdef DEBUG
+#define SDRC_SET_ONE(reg, st, end, field, rate) \
+	if (set_sdrc_timing_regval((reg), (st), (end), \
+			rx51_timings->field, (rate), #field) < 0) \
+		err = -1;
+#else
+#define SDRC_SET_ONE(reg, st, end, field, rate) \
+	if (set_sdrc_timing_regval((reg), (st), (end), \
+			rx51_timings->field) < 0) \
+		err = -1;
+#endif
+
+#ifdef DEBUG
+static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
+				int time, long rate, const char *name)
+#else
+static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
+				int time, long rate)
+#endif
+{
+	int ticks, ret;
+	ret = 0;
+
+	if (time == 0)
+		ticks = 0;
+	else
+		ticks = sdrc_ps_to_ticks(time, rate);
+
+#ifdef DEBUG
+	ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks,
+				     rate, name);
+#else
+	ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks);
+#endif
+
+	return ret;
+}
+
+#ifdef DEBUG
+#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
+	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
+			rx51_timings->field, \
+			(rate), #field) < 0) \
+		err = -1;
+
+#else
+#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
+	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
+			rx51_timings->field, (rate)) < 0) \
+		err = -1;
+#endif
+
+static int sdrc_timings(int id, long rate)
+{
+	u32 ticks_per_ms;
+	u32 rfr, l;
+	u32 actim_ctrla = 0, actim_ctrlb = 0;
+	u32 rfr_ctrl;
+	int err = 0;
+	long l3_rate = rate / 1000;
+
+	SDRC_SET_ONE_PS(&actim_ctrla,  0,  4, tDAL, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla,  6,  8, tDPL, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla,  9, 11, tRRD, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 12, 14, tRCD, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 15, 17, tRP, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 18, 21, tRAS, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 22, 26, tRC, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 27, 31, tRFC, l3_rate);
+
+	SDRC_SET_ONE_PS(&actim_ctrlb,  0,  7, tXSR, l3_rate);
+
+	SDRC_SET_ONE(&actim_ctrlb,  8, 10, tXP, l3_rate);
+	SDRC_SET_ONE(&actim_ctrlb, 12, 14, tCKE, l3_rate);
+	SDRC_SET_ONE(&actim_ctrlb, 16, 17, tWTR, l3_rate);
+
+	ticks_per_ms = l3_rate;
+	rfr = rx51_timings[0].tREF * ticks_per_ms / 1000000;
+	if (rfr > 65535 + 50)
+		rfr = 65535;
+	else
+		rfr -= 50;
+
+#ifdef DEBUG
+	printk(KERN_INFO "SDRC tREF: %i ticks\n", rfr);
+#endif
+
+	l = rfr << 8;
+	rfr_ctrl = l | 0x1; /* autorefresh, reload counter with 1xARCV */
+
+	rx51_sdrc_params[id].rate = rate;
+	rx51_sdrc_params[id].actim_ctrla = actim_ctrla;
+	rx51_sdrc_params[id].actim_ctrlb = actim_ctrlb;
+	rx51_sdrc_params[id].rfr_ctrl = rfr_ctrl;
+	rx51_sdrc_params[id].mr = 0x32;
+
+	rx51_sdrc_params[id + 1].rate = 0;
+
+	return err;
+}
+
+struct omap_sdrc_params *rx51_get_sdram_timings(void)
+{
+	int err;
+
+	err = sdrc_timings(0, 41500000);
+	err |= sdrc_timings(1, 83000000);
+	err |= sdrc_timings(2, 166000000);
+
+	return &rx51_sdrc_params[0];
+}
+
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 78869a9a1cc2..67bb3476b707 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -22,13 +22,16 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
-#include <mach/usb.h>
+#include <plat/mcspi.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+
+#include "mux.h"
+
+struct omap_sdrc_params *rx51_get_sdram_timings(void);
 
 static struct omap_lcd_config rx51_lcd_config = {
 	.ctrl_name	= "internal",
@@ -55,24 +58,36 @@ static struct omap_board_config_kernel rx51_config[] = {
 
 static void __init rx51_init_irq(void)
 {
+	struct omap_sdrc_params *sdrc_params;
+
 	omap_board_config = rx51_config;
 	omap_board_config_size = ARRAY_SIZE(rx51_config);
-	omap2_init_common_hw(NULL, NULL);
+	sdrc_params = rx51_get_sdram_timings();
+	omap2_init_common_hw(sdrc_params, sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
 extern void __init rx51_peripherals_init(void);
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init rx51_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
 	usb_musb_init();
 	rx51_peripherals_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_cfg_reg(H16_34XX_SDRC_CKE0);
-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
 static void __init rx51_map_io(void)
@@ -84,7 +99,7 @@ static void __init rx51_map_io(void)
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= rx51_map_io,
 	.init_irq	= rx51_init_irq,
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 1f13e2a1f322..bb4018b60642 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -14,20 +14,20 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 
-#define ZOOM2_SMSC911X_CS	7
-#define ZOOM2_SMSC911X_GPIO	158
-#define ZOOM2_QUADUART_CS	3
-#define ZOOM2_QUADUART_GPIO	102
+#define ZOOM_SMSC911X_CS	7
+#define ZOOM_SMSC911X_GPIO	158
+#define ZOOM_QUADUART_CS	3
+#define ZOOM_QUADUART_GPIO	102
 #define QUART_CLK		1843200
 #define DEBUG_BASE		0x08000000
-#define ZOOM2_ETHR_START	DEBUG_BASE
+#define ZOOM_ETHR_START	DEBUG_BASE
 
-static struct resource zoom2_smsc911x_resources[] = {
+static struct resource zoom_smsc911x_resources[] = {
 	[0] = {
-		.start	= ZOOM2_ETHR_START,
-		.end	= ZOOM2_ETHR_START + SZ_4K,
+		.start	= ZOOM_ETHR_START,
+		.end	= ZOOM_ETHR_START + SZ_4K,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -35,42 +35,42 @@ static struct resource zoom2_smsc911x_resources[] = {
 	},
 };
 
-static struct smsc911x_platform_config zoom2_smsc911x_config = {
+static struct smsc911x_platform_config zoom_smsc911x_config = {
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 	.flags		= SMSC911X_USE_32BIT,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 };
 
-static struct platform_device zoom2_smsc911x_device = {
+static struct platform_device zoom_smsc911x_device = {
 	.name		= "smsc911x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(zoom2_smsc911x_resources),
-	.resource	= zoom2_smsc911x_resources,
+	.num_resources	= ARRAY_SIZE(zoom_smsc911x_resources),
+	.resource	= zoom_smsc911x_resources,
 	.dev		= {
-		.platform_data = &zoom2_smsc911x_config,
+		.platform_data = &zoom_smsc911x_config,
 	},
 };
 
-static inline void __init zoom2_init_smsc911x(void)
+static inline void __init zoom_init_smsc911x(void)
 {
 	int eth_cs;
 	unsigned long cs_mem_base;
 	int eth_gpio = 0;
 
-	eth_cs = ZOOM2_SMSC911X_CS;
+	eth_cs = ZOOM_SMSC911X_CS;
 
 	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
 		return;
 	}
 
-	zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
-	zoom2_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+	zoom_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	zoom_smsc911x_resources[0].end   = cs_mem_base + 0xff;
 
-	eth_gpio = ZOOM2_SMSC911X_GPIO;
+	eth_gpio = ZOOM_SMSC911X_GPIO;
 
-	zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+	zoom_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
 
 	if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
@@ -94,7 +94,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	}
 };
 
-static struct platform_device zoom2_debugboard_serial_device = {
+static struct platform_device zoom_debugboard_serial_device = {
 	.name			= "serial8250",
 	.id			= 3,
 	.dev			= {
@@ -102,13 +102,13 @@ static struct platform_device zoom2_debugboard_serial_device = {
 	},
 };
 
-static inline void __init zoom2_init_quaduart(void)
+static inline void __init zoom_init_quaduart(void)
 {
 	int quart_cs;
 	unsigned long cs_mem_base;
 	int quart_gpio = 0;
 
-	quart_cs = ZOOM2_QUADUART_CS;
+	quart_cs = ZOOM_QUADUART_CS;
 
 	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC mem"
@@ -116,7 +116,7 @@ static inline void __init zoom2_init_quaduart(void)
 		return;
 	}
 
-	quart_gpio = ZOOM2_QUADUART_GPIO;
+	quart_gpio = ZOOM_QUADUART_GPIO;
 
 	if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
@@ -126,15 +126,15 @@ static inline void __init zoom2_init_quaduart(void)
 	gpio_direction_input(quart_gpio);
 }
 
-static inline int omap_zoom2_debugboard_detect(void)
+static inline int omap_zoom_debugboard_detect(void)
 {
 	int debug_board_detect = 0;
 	int ret = 1;
 
-	debug_board_detect = ZOOM2_SMSC911X_GPIO;
+	debug_board_detect = ZOOM_SMSC911X_GPIO;
 
-	if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+	if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
 		"board detect\n", debug_board_detect);
 		return 0;
 	}
@@ -147,17 +147,17 @@ static inline int omap_zoom2_debugboard_detect(void)
 	return ret;
 }
 
-static struct platform_device *zoom2_devices[] __initdata = {
-	&zoom2_smsc911x_device,
-	&zoom2_debugboard_serial_device,
+static struct platform_device *zoom_devices[] __initdata = {
+	&zoom_smsc911x_device,
+	&zoom_debugboard_serial_device,
 };
 
-int __init omap_zoom2_debugboard_init(void)
+int __init zoom_debugboard_init(void)
 {
-	if (!omap_zoom2_debugboard_detect())
+	if (!omap_zoom_debugboard_detect())
 		return 0;
 
-	zoom2_init_smsc911x();
-	zoom2_init_quaduart();
-	return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+	zoom_init_smsc911x();
+	zoom_init_quaduart();
+	return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
 }
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
new file mode 100755
index 000000000000..258794db488f
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -0,0 +1,271 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ *
+ * Modified from mach-omap2/board-zoom2.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/common.h>
+#include <plat/usb.h>
+
+#include "mmc-twl4030.h"
+
+/* Zoom2 has Qwerty keyboard*/
+static int board_keymap[] = {
+	KEY(0, 0, KEY_E),
+	KEY(0, 1, KEY_R),
+	KEY(0, 2, KEY_T),
+	KEY(0, 3, KEY_HOME),
+	KEY(0, 6, KEY_I),
+	KEY(0, 7, KEY_LEFTSHIFT),
+	KEY(1, 0, KEY_D),
+	KEY(1, 1, KEY_F),
+	KEY(1, 2, KEY_G),
+	KEY(1, 3, KEY_SEND),
+	KEY(1, 6, KEY_K),
+	KEY(1, 7, KEY_ENTER),
+	KEY(2, 0, KEY_X),
+	KEY(2, 1, KEY_C),
+	KEY(2, 2, KEY_V),
+	KEY(2, 3, KEY_END),
+	KEY(2, 6, KEY_DOT),
+	KEY(2, 7, KEY_CAPSLOCK),
+	KEY(3, 0, KEY_Z),
+	KEY(3, 1, KEY_KPPLUS),
+	KEY(3, 2, KEY_B),
+	KEY(3, 3, KEY_F1),
+	KEY(3, 6, KEY_O),
+	KEY(3, 7, KEY_SPACE),
+	KEY(4, 0, KEY_W),
+	KEY(4, 1, KEY_Y),
+	KEY(4, 2, KEY_U),
+	KEY(4, 3, KEY_F2),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(4, 6, KEY_L),
+	KEY(4, 7, KEY_LEFT),
+	KEY(5, 0, KEY_S),
+	KEY(5, 1, KEY_H),
+	KEY(5, 2, KEY_J),
+	KEY(5, 3, KEY_F3),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	KEY(5, 6, KEY_M),
+	KEY(5, 7, KEY_ENTER),
+	KEY(6, 0, KEY_Q),
+	KEY(6, 1, KEY_A),
+	KEY(6, 2, KEY_N),
+	KEY(6, 3, KEY_BACKSPACE),
+	KEY(6, 6, KEY_P),
+	KEY(6, 7, KEY_SELECT),
+	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
+	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
+	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
+	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
+	KEY(7, 5, KEY_RIGHT),
+	KEY(7, 6, KEY_UP),
+	KEY(7, 7, KEY_DOWN)
+};
+
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
+static struct twl4030_keypad_data zoom_kp_twl4030_data = {
+	.keymap_data	= &board_map_data,
+	.rows		= 8,
+	.cols		= 8,
+	.rep		= 1,
+};
+
+static struct regulator_consumer_supply zoom_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+static struct regulator_consumer_supply zoom_vsim_supply = {
+	.supply		= "vmmc_aux",
+};
+
+static struct regulator_consumer_supply zoom_vmmc2_supply = {
+	.supply		= "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data zoom_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data zoom_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 1850000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data zoom_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom_vsim_supply,
+};
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.name		= "external",
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+		.power_saving	= true,
+	},
+	{
+		.name		= "internal",
+		.mmc		= 2,
+		.wires		= 8,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.nonremovable	= true,
+		.power_saving	= true,
+	},
+	{}      /* Terminator */
+};
+
+static int zoom_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	*/
+	zoom_vmmc1_supply.dev = mmc[0].dev;
+	zoom_vsim_supply.dev = mmc[0].dev;
+	zoom_vmmc2_supply.dev = mmc[1].dev;
+
+	return 0;
+}
+
+
+static int zoom_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
+8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
+5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
+4040,  3910,  3790,  3670,  3550
+};
+
+static struct twl4030_bci_platform_data zoom_bci_data = {
+	.battery_tmp_tbl	= zoom_batt_table,
+	.tblsize		= ARRAY_SIZE(zoom_batt_table),
+};
+
+static struct twl4030_usb_data zoom_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_gpio_platform_data zoom_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= zoom_twl_gpio_setup,
+};
+
+static struct twl4030_madc_platform_data zoom_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct twl4030_codec_audio_data zoom_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data zoom_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &zoom_audio_data,
+};
+
+static struct twl4030_platform_data zoom_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.bci		= &zoom_bci_data,
+	.madc		= &zoom_madc_data,
+	.usb		= &zoom_usb_data,
+	.gpio		= &zoom_gpio_data,
+	.keypad		= &zoom_kp_twl4030_data,
+	.codec		= &zoom_codec_data,
+	.vmmc1          = &zoom_vmmc1,
+	.vmmc2          = &zoom_vmmc2,
+	.vsim           = &zoom_vsim,
+
+};
+
+static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl5030", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &zoom_twldata,
+	},
+};
+
+static int __init omap_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo,
+			ARRAY_SIZE(zoom_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+void __init zoom_peripherals_init(void)
+{
+	omap_i2c_init();
+	omap_serial_init();
+	usb_musb_init();
+}
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 51e0b3ba5f3a..bb87cf7878ff 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -13,223 +13,43 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/usb.h>
+#include <plat/common.h>
+#include <plat/board.h>
 
-#include "mmc-twl4030.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-
-/* Zoom2 has Qwerty keyboard*/
-static int board_keymap[] = {
-	KEY(0, 0, KEY_E),
-	KEY(0, 1, KEY_R),
-	KEY(0, 2, KEY_T),
-	KEY(0, 3, KEY_HOME),
-	KEY(0, 6, KEY_I),
-	KEY(0, 7, KEY_LEFTSHIFT),
-	KEY(1, 0, KEY_D),
-	KEY(1, 1, KEY_F),
-	KEY(1, 2, KEY_G),
-	KEY(1, 3, KEY_SEND),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_ENTER),
-	KEY(2, 0, KEY_X),
-	KEY(2, 1, KEY_C),
-	KEY(2, 2, KEY_V),
-	KEY(2, 3, KEY_END),
-	KEY(2, 6, KEY_DOT),
-	KEY(2, 7, KEY_CAPSLOCK),
-	KEY(3, 0, KEY_Z),
-	KEY(3, 1, KEY_KPPLUS),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_F1),
-	KEY(3, 6, KEY_O),
-	KEY(3, 7, KEY_SPACE),
-	KEY(4, 0, KEY_W),
-	KEY(4, 1, KEY_Y),
-	KEY(4, 2, KEY_U),
-	KEY(4, 3, KEY_F2),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(4, 6, KEY_L),
-	KEY(4, 7, KEY_LEFT),
-	KEY(5, 0, KEY_S),
-	KEY(5, 1, KEY_H),
-	KEY(5, 2, KEY_J),
-	KEY(5, 3, KEY_F3),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	KEY(5, 6, KEY_M),
-	KEY(5, 7, KEY_ENTER),
-	KEY(6, 0, KEY_Q),
-	KEY(6, 1, KEY_A),
-	KEY(6, 2, KEY_N),
-	KEY(6, 3, KEY_BACKSPACE),
-	KEY(6, 6, KEY_P),
-	KEY(6, 7, KEY_SELECT),
-	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
-	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
-	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
-	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
-	KEY(7, 5, KEY_RIGHT),
-	KEY(7, 6, KEY_UP),
-	KEY(7, 7, KEY_DOWN)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 8,
-	.rep		= 1,
-};
-
-static struct omap_board_config_kernel zoom2_config[] __initdata = {
-};
-
-static struct regulator_consumer_supply zoom2_vmmc1_supply = {
-	.supply		= "vmmc",
-};
-
-static struct regulator_consumer_supply zoom2_vsim_supply = {
-	.supply		= "vmmc_aux",
-};
-
-static struct regulator_consumer_supply zoom2_vmmc2_supply = {
-	.supply		= "vmmc",
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data zoom2_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom2_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data zoom2_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 1850000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom2_vmmc2_supply,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data zoom2_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom2_vsim_supply,
-};
-
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 2,
-		.wires		= 4,
-		.gpio_wp	= -EINVAL,
-	},
-	{}      /* Terminator */
-};
+#include <mach/board-zoom.h>
 
-static int zoom2_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	/* gpio + 0 is "mmc0_cd" (input/IRQ),
-	 * gpio + 1 is "mmc1_cd" (input/IRQ)
-	 */
-	mmc[0].gpio_cd = gpio + 0;
-	mmc[1].gpio_cd = gpio + 1;
-	twl4030_mmc_init(mmc);
-
-	/* link regulators to MMC adapters ... we "know" the
-	 * regulators will be set up only *after* we return.
-	*/
-	zoom2_vmmc1_supply.dev = mmc[0].dev;
-	zoom2_vsim_supply.dev = mmc[0].dev;
-	zoom2_vmmc2_supply.dev = mmc[1].dev;
-
-	return 0;
-}
-
-
-static int zoom2_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
-8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
-5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
-4040,  3910,  3790,  3670,  3550
-};
-
-static struct twl4030_bci_platform_data zoom2_bci_data = {
-	.battery_tmp_tbl	= zoom2_batt_table,
-	.tblsize		= ARRAY_SIZE(zoom2_batt_table),
-};
-
-static struct twl4030_usb_data zoom2_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
+#include "mux.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
 
 static void __init omap_zoom2_init_irq(void)
 {
-	omap_board_config = zoom2_config;
-	omap_board_config_size = ARRAY_SIZE(zoom2_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 				 mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
-static struct twl4030_gpio_platform_data zoom2_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.setup		= zoom2_twl_gpio_setup,
-};
+/* REVISIT: These audio entries can be removed once MFD code is merged */
+#if 0
 
 static struct twl4030_madc_platform_data zoom2_madc_data = {
 	.irq_line	= 1,
 };
 
+static struct twl4030_codec_audio_data zoom2_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data zoom2_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &zoom2_audio_data,
+};
+
 static struct twl4030_platform_data zoom2_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -240,38 +60,28 @@ static struct twl4030_platform_data zoom2_twldata = {
 	.usb		= &zoom2_usb_data,
 	.gpio		= &zoom2_gpio_data,
 	.keypad		= &zoom2_kp_twl4030_data,
+	.codec		= &zoom2_codec_data,
 	.vmmc1          = &zoom2_vmmc1,
 	.vmmc2          = &zoom2_vmmc2,
 	.vsim           = &zoom2_vsim,
 
 };
 
-static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("twl4030", 0x48),
-		.flags		= I2C_CLIENT_WAKE,
-		.irq		= INT_34XX_SYS_NIRQ,
-		.platform_data	= &zoom2_twldata,
-	},
-};
+#endif
 
-static int __init omap_i2c_init(void)
-{
-	omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
-			ARRAY_SIZE(zoom2_i2c_boardinfo));
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-extern int __init omap_zoom2_debugboard_init(void);
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
 
 static void __init omap_zoom2_init(void)
 {
-	omap_i2c_init();
-	omap_serial_init();
-	omap_zoom2_debugboard_init();
-	usb_musb_init();
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	zoom_peripherals_init();
+	zoom_debugboard_init();
 }
 
 static void __init omap_zoom2_map_io(void)
@@ -282,7 +92,7 @@ static void __init omap_zoom2_map_io(void)
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_zoom2_map_io,
 	.init_irq	= omap_zoom2_init_irq,
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
new file mode 100644
index 000000000000..a9fe9181b010
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/board-zoom.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+
+#include "mux.h"
+#include "sdram-hynix-h8mbx00u0mer-0em.h"
+
+static void __init omap_zoom_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+static struct omap_board_config_kernel zoom_config[] __initdata = {
+};
+
+static void __init omap_zoom_init_irq(void)
+{
+	omap_board_config = zoom_config;
+	omap_board_config_size = ARRAY_SIZE(zoom_config);
+	omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
+			h8mbx00u0mer0em_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
+static void __init omap_zoom_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+	zoom_peripherals_init();
+	zoom_debugboard_init();
+}
+
+MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_zoom_map_io,
+	.init_irq	= omap_zoom_init_irq,
+	.init_machine	= omap_zoom_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index f2a92d614f0f..759c72a48f7f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -24,13 +24,13 @@
 #include <linux/io.h>
 #include <linux/bitops.h>
 
-#include <mach/clock.h>
-#include <mach/clockdomain.h>
-#include <mach/cpu.h>
-#include <mach/prcm.h>
+#include <plat/clock.h>
+#include <plat/clockdomain.h>
+#include <plat/cpu.h>
+#include <plat/prcm.h>
 #include <asm/div64.h>
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "sdrc.h"
 #include "clock.h"
 #include "prm.h"
@@ -70,9 +70,41 @@
 u8 cpu_mask;
 
 /*-------------------------------------------------------------------------
- * OMAP2/3 specific clock functions
+ * OMAP2/3/4 specific clock functions
  *-------------------------------------------------------------------------*/
 
+void omap2_init_dpll_parent(struct clk *clk)
+{
+	u32 v;
+	struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return;
+
+	/* Return bypass rate if DPLL is bypassed */
+	v = __raw_readl(dd->control_reg);
+	v &= dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	/* Reparent in case the dpll is in bypass */
+	if (cpu_is_omap24xx()) {
+		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	} else if (cpu_is_omap34xx()) {
+		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	} else if (cpu_is_omap44xx()) {
+		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	}
+	return;
+}
+
 /**
  * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware
  * @clk: struct clk *
@@ -149,6 +181,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
  * clockdomain pointer, and save it into the struct clk.  Intended to be
  * called during clk_register().  No return value.
  */
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
 void omap2_init_clk_clkdm(struct clk *clk)
 {
 	struct clockdomain *clkdm;
@@ -166,6 +199,7 @@ void omap2_init_clk_clkdm(struct clk *clk)
 			 "clkdm %s\n", clk->name, clk->clkdm_name);
 	}
 }
+#endif
 
 /**
  * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
@@ -247,6 +281,11 @@ u32 omap2_get_dpll_rate(struct clk *clk)
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
 			return dd->clk_bypass->rate;
+	} else if (cpu_is_omap44xx()) {
+		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
+			return dd->clk_bypass->rate;
 	}
 
 	v = __raw_readl(dd->mult_div1_reg);
@@ -437,8 +476,10 @@ void omap2_clk_disable(struct clk *clk)
 		_omap2_clk_disable(clk);
 		if (clk->parent)
 			omap2_clk_disable(clk->parent);
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
 		if (clk->clkdm)
 			omap2_clkdm_clk_disable(clk->clkdm, clk);
+#endif
 
 	}
 }
@@ -448,8 +489,10 @@ int omap2_clk_enable(struct clk *clk)
 	int ret = 0;
 
 	if (clk->usecount++ == 0) {
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
 		if (clk->clkdm)
 			omap2_clkdm_clk_enable(clk->clkdm, clk);
+#endif
 
 		if (clk->parent) {
 			ret = omap2_clk_enable(clk->parent);
@@ -468,8 +511,10 @@ int omap2_clk_enable(struct clk *clk)
 	return ret;
 
 err:
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
 	if (clk->clkdm)
 		omap2_clkdm_clk_disable(clk->clkdm, clk);
+#endif
 	clk->usecount--;
 	return ret;
 }
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9ae7540f8af2..93c48df3b5b1 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -1,8 +1,8 @@
 /*
  *  linux/arch/arm/mach-omap2/clock.h
  *
- *  Copyright (C) 2005-2008 Texas Instruments, Inc.
- *  Copyright (C) 2004-2008 Nokia Corporation
+ *  Copyright (C) 2005-2009 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2009 Nokia Corporation
  *
  *  Contacts:
  *  Richard Woodruff <r-woodruff2@ti.com>
@@ -16,7 +16,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
@@ -36,6 +36,17 @@
 #define OMAP3XXX_EN_DPLL_FRBYPASS		0x6
 #define OMAP3XXX_EN_DPLL_LOCKED			0x7
 
+/* OMAP4xxx CM_CLKMODE_DPLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
+#define OMAP4XXX_EN_DPLL_MNBYPASS		0x4
+#define OMAP4XXX_EN_DPLL_LPBYPASS		0x5
+#define OMAP4XXX_EN_DPLL_FRBYPASS		0x6
+#define OMAP4XXX_EN_DPLL_LOCKED			0x7
+
+/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
+#define DPLL_LOW_POWER_STOP	0x1
+#define DPLL_LOW_POWER_BYPASS	0x5
+#define DPLL_LOCKED		0x7
+
 int omap2_clk_init(void);
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
@@ -44,6 +55,14 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
 int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance);
 long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
+unsigned long omap3_dpll_recalc(struct clk *clk);
+unsigned long omap3_clkoutx2_recalc(struct clk *clk);
+void omap3_dpll_allow_idle(struct clk *clk);
+void omap3_dpll_deny_idle(struct clk *clk);
+u32 omap3_dpll_autoidle_read(struct clk *clk);
+int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
+int omap3_noncore_dpll_enable(struct clk *clk);
+void omap3_noncore_dpll_disable(struct clk *clk);
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 void omap2_clk_disable_unused(struct clk *clk);
@@ -63,6 +82,7 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk);
 long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
 u32 omap2_get_dpll_rate(struct clk *clk);
+void omap2_init_dpll_parent(struct clk *clk);
 int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
 void omap2_clk_prepare_for_reboot(void);
 int omap2_dflt_clk_enable(struct clk *clk);
@@ -72,29 +92,17 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
 void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
 				u8 *idlest_bit);
 
+extern u8 cpu_mask;
+
 extern const struct clkops clkops_omap2_dflt_wait;
 extern const struct clkops clkops_omap2_dflt;
 
-extern u8 cpu_mask;
+extern struct clk_functions omap2_clk_functions;
+extern struct clk *vclk, *sclk;
 
-/* clksel_rate data common to 24xx/343x */
-static const struct clksel_rate gpt_32k_rates[] = {
-	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
-	 { .div = 0 }
-};
-
-static const struct clksel_rate gpt_sys_rates[] = {
-	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
-	 { .div = 0 }
-};
-
-static const struct clksel_rate gfx_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X },
-	{ .div = 0 }
-};
+extern const struct clksel_rate gpt_32k_rates[];
+extern const struct clksel_rate gpt_sys_rates[];
+extern const struct clksel_rate gfx_l3_rates[];
 
 
 #endif
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
deleted file mode 100644
index e2dbedd581e8..000000000000
--- a/arch/arm/mach-omap2/clock24xx.c
+++ /dev/null
@@ -1,805 +0,0 @@
-/*
- *  linux/arch/arm/mach-omap2/clock.c
- *
- *  Copyright (C) 2005-2008 Texas Instruments, Inc.
- *  Copyright (C) 2004-2008 Nokia Corporation
- *
- *  Contacts:
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Paul Walmsley
- *
- *  Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- *  Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/cpufreq.h>
-#include <linux/bitops.h>
-
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/prcm.h>
-#include <asm/div64.h>
-#include <asm/clkdev.h>
-
-#include <mach/sdrc.h>
-#include "clock.h"
-#include "prm.h"
-#include "prm-regbits-24xx.h"
-#include "cm.h"
-#include "cm-regbits-24xx.h"
-
-static const struct clkops clkops_oscck;
-static const struct clkops clkops_fixed;
-
-static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
-					   void __iomem **idlest_reg,
-					   u8 *idlest_bit);
-
-/* 2430 I2CHS has non-standard IDLEST register */
-static const struct clkops clkops_omap2430_i2chs_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap2430_clk_i2chs_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-#include "clock24xx.h"
-
-struct omap_clk {
-	u32		cpu;
-	struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck, cp) 		\
-	{				\
-		 .cpu = cp,		\
-		.lk = {			\
-			.dev_id = dev,	\
-			.con_id = con,	\
-			.clk = ck,	\
-		},			\
-	}
-
-#define CK_243X			RATE_IN_243X
-#define CK_242X			RATE_IN_242X
-
-static struct omap_clk omap24xx_clks[] = {
-	/* external root sources */
-	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
-	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X | CK_242X),
-	/* internal analog sources */
-	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"apll54_ck",	&apll54_ck,	CK_243X | CK_242X),
-	/* internal prcm root sources */
-	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"core_ck",	&core_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"ck_wdt1_osc",	&wdt1_osc_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
-	CLK(NULL,	"sys_clkout",	&sys_clkout,	CK_243X | CK_242X),
-	CLK(NULL,	"sys_clkout2_src", &sys_clkout2_src, CK_242X),
-	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_242X),
-	CLK(NULL,	"emul_ck",	&emul_ck,	CK_242X),
-	/* mpu domain clocks */
-	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_243X | CK_242X),
-	/* dsp domain clocks */
-	CLK(NULL,	"dsp_fck",	&dsp_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
-	CLK(NULL,	"dsp_ick",	&dsp_ick,	CK_242X),
-	CLK(NULL,	"iva2_1_ick",	&iva2_1_ick,	CK_243X),
-	CLK(NULL,	"iva1_ifck",	&iva1_ifck,	CK_242X),
-	CLK(NULL,	"iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
-	/* GFX domain clocks */
-	CLK(NULL,	"gfx_3d_fck",	&gfx_3d_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_243X | CK_242X),
-	/* Modem domain clocks */
-	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
-	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
-	/* DSS domain clocks */
-	CLK("omapfb",	"ick",		&dss_ick,	CK_243X | CK_242X),
-	CLK("omapfb",	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
-	CLK("omapfb",	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
-	CLK("omapfb",	"tv_fck",	&dss_54m_fck,	CK_243X | CK_242X),
-	/* L3 domain clocks */
-	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X | CK_242X),
-	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_243X | CK_242X),
-	/* L4 domain clocks */
-	CLK(NULL,	"l4_ck",	&l4_ck,		CK_243X | CK_242X),
-	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_243X | CK_242X),
-	/* virtual meta-group clock */
-	CLK(NULL,	"virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
-	/* general l4 interface ck, multi-parent functional clk */
-	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_243X),
-	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_243X),
-	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_243X),
-	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_243X),
-	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_243X),
-	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_243X),
-	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_243X),
-	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_243X),
-	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X | CK_242X),
-	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_243X | CK_242X),
-	CLK("omap_wdt",	"fck",		&mpu_wdt_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"icr_ick",	&icr_ick,	CK_243X),
-	CLK("omap24xxcam", "fck",	&cam_fck,	CK_243X | CK_242X),
-	CLK("omap24xxcam", "ick",	&cam_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_242X),
-	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_242X),
-	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_243X | CK_242X),
-	CLK("mmci-omap.0", "ick",	&mmc_ick,	CK_242X),
-	CLK("mmci-omap.0", "fck",	&mmc_fck,	CK_242X),
-	CLK(NULL,	"fac_ick",	&fac_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
-	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
-	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X | CK_242X),
-	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X | CK_242X),
-	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_243X | CK_242X),
-	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_242X),
-	CLK("i2c_omap.1", "fck",	&i2chs1_fck,	CK_243X),
-	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_243X | CK_242X),
-	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_242X),
-	CLK("i2c_omap.2", "fck",	&i2chs2_fck,	CK_243X),
-	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"vlynq_ick",	&vlynq_ick,	CK_242X),
-	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
-	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_243X),
-	CLK(NULL,	"des_ick",	&des_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"sha_ick",	&sha_ick,	CK_243X | CK_242X),
-	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
-	CLK("musb_hdrc",	"ick",	&usbhs_ick,	CK_243X),
-	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
-	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
-	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),
-	CLK("mmci-omap-hs.1", "fck",	&mmchs2_fck,	CK_243X),
-	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
-	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
-	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
-	CLK("mmci-omap-hs.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
-	CLK("mmci-omap-hs.1", "mmchsdb_fck", 	&mmchsdb2_fck,	CK_243X),
-};
-
-/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
-#define EN_APLL_STOPPED			0
-#define EN_APLL_LOCKED			3
-
-/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
-#define APLLS_CLKIN_19_2MHZ		0
-#define APLLS_CLKIN_13MHZ		2
-#define APLLS_CLKIN_12MHZ		3
-
-/* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
-
-static struct prcm_config *curr_prcm_set;
-static struct clk *vclk;
-static struct clk *sclk;
-
-static void __iomem *prcm_clksrc_ctrl;
-
-/*-------------------------------------------------------------------------
- * Omap24xx specific clock functions
- *-------------------------------------------------------------------------*/
-
-/**
- * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- *
- * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
- * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
- * passes back the correct CM_IDLEST register address for I2CHS
- * modules.  No return value.
- */
-static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
-					   void __iomem **idlest_reg,
-					   u8 *idlest_bit)
-{
-	*idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
-	*idlest_bit = clk->enable_bit;
-}
-
-
-/**
- * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
- * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
- *
- * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
- * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
- * (the latter is unusual).  This currently should be called with
- * struct clk *dpll_ck, which is a composite clock of dpll_ck and
- * core_ck.
- */
-static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
-{
-	long long core_clk;
-	u32 v;
-
-	core_clk = omap2_get_dpll_rate(clk);
-
-	v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	v &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if (v == CORE_CLK_SRC_32K)
-		core_clk = 32768;
-	else
-		core_clk *= v;
-
-	return core_clk;
-}
-
-static int omap2_enable_osc_ck(struct clk *clk)
-{
-	u32 pcc;
-
-	pcc = __raw_readl(prcm_clksrc_ctrl);
-
-	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-
-	return 0;
-}
-
-static void omap2_disable_osc_ck(struct clk *clk)
-{
-	u32 pcc;
-
-	pcc = __raw_readl(prcm_clksrc_ctrl);
-
-	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-}
-
-static const struct clkops clkops_oscck = {
-	.enable		= &omap2_enable_osc_ck,
-	.disable	= &omap2_disable_osc_ck,
-};
-
-#ifdef OLD_CK
-/* Recalculate SYST_CLK */
-static void omap2_sys_clk_recalc(struct clk * clk)
-{
-	u32 div = PRCM_CLKSRC_CTRL;
-	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
-	div >>= clk->rate_offset;
-	clk->rate = (clk->parent->rate / div);
-	propagate_rate(clk);
-}
-#endif	/* OLD_CK */
-
-/* Enable an APLL if off */
-static int omap2_clk_fixed_enable(struct clk *clk)
-{
-	u32 cval, apll_mask;
-
-	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
-
-	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-
-	if ((cval & apll_mask) == apll_mask)
-		return 0;   /* apll already enabled */
-
-	cval &= ~apll_mask;
-	cval |= apll_mask;
-	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-
-	if (clk == &apll96_ck)
-		cval = OMAP24XX_ST_96M_APLL;
-	else if (clk == &apll54_ck)
-		cval = OMAP24XX_ST_54M_APLL;
-
-	omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
-			     clk->name);
-
-	/*
-	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
-	 * fails?
-	 */
-	return 0;
-}
-
-/* Stop APLL */
-static void omap2_clk_fixed_disable(struct clk *clk)
-{
-	u32 cval;
-
-	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
-	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-}
-
-static const struct clkops clkops_fixed = {
-	.enable		= &omap2_clk_fixed_enable,
-	.disable	= &omap2_clk_fixed_disable,
-};
-
-/*
- * Uses the current prcm set to tell if a rate is valid.
- * You can go slower, but not faster within a given rate set.
- */
-static long omap2_dpllcore_round_rate(unsigned long target_rate)
-{
-	u32 high, low, core_clk_src;
-
-	core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
-		high = curr_prcm_set->dpll_speed * 2;
-		low = curr_prcm_set->dpll_speed;
-	} else {				/* DPLL clockout x 2 */
-		high = curr_prcm_set->dpll_speed;
-		low = curr_prcm_set->dpll_speed / 2;
-	}
-
-#ifdef DOWN_VARIABLE_DPLL
-	if (target_rate > high)
-		return high;
-	else
-		return target_rate;
-#else
-	if (target_rate > low)
-		return high;
-	else
-		return low;
-#endif
-
-}
-
-static unsigned long omap2_dpllcore_recalc(struct clk *clk)
-{
-	return omap2xxx_clk_get_core_rate(clk);
-}
-
-static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
-{
-	u32 cur_rate, low, mult, div, valid_rate, done_rate;
-	u32 bypass = 0;
-	struct prcm_config tmpset;
-	const struct dpll_data *dd;
-
-	cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
-	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if ((rate == (cur_rate / 2)) && (mult == 2)) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
-	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-	} else if (rate != cur_rate) {
-		valid_rate = omap2_dpllcore_round_rate(rate);
-		if (valid_rate != rate)
-			return -EINVAL;
-
-		if (mult == 1)
-			low = curr_prcm_set->dpll_speed;
-		else
-			low = curr_prcm_set->dpll_speed / 2;
-
-		dd = clk->dpll_data;
-		if (!dd)
-			return -EINVAL;
-
-		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
-		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
-					   dd->div1_mask);
-		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
-		tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
-		if (rate > low) {
-			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
-			mult = ((rate / 2) / 1000000);
-			done_rate = CORE_CLK_SRC_DPLL_X2;
-		} else {
-			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
-			mult = (rate / 1000000);
-			done_rate = CORE_CLK_SRC_DPLL;
-		}
-		tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
-		tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
-
-		/* Worst case */
-		tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
-
-		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
-			bypass = 1;
-
-		/* For omap2xxx_sdrc_init_params() */
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
-		/* Force dll lock mode */
-		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
-			       bypass);
-
-		/* Errata: ret dll entry state */
-		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
-		omap2xxx_sdrc_reprogram(done_rate, 0);
-	}
-
-	return 0;
-}
-
-/**
- * omap2_table_mpu_recalc - just return the MPU speed
- * @clk: virt_prcm_set struct clk
- *
- * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
- */
-static unsigned long omap2_table_mpu_recalc(struct clk *clk)
-{
-	return curr_prcm_set->mpu_speed;
-}
-
-/*
- * Look for a rate equal or less than the target rate given a configuration set.
- *
- * What's not entirely clear is "which" field represents the key field.
- * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
- * just uses the ARM rates.
- */
-static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
-{
-	struct prcm_config *ptr;
-	long highest_rate;
-
-	if (clk != &virt_prcm_set)
-		return -EINVAL;
-
-	highest_rate = -EINVAL;
-
-	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
-		if (!(ptr->flags & cpu_mask))
-			continue;
-		if (ptr->xtal_speed != sys_ck.rate)
-			continue;
-
-		highest_rate = ptr->mpu_speed;
-
-		/* Can check only after xtal frequency check */
-		if (ptr->mpu_speed <= rate)
-			break;
-	}
-	return highest_rate;
-}
-
-/* Sets basic clocks based on the specified rate */
-static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
-{
-	u32 cur_rate, done_rate, bypass = 0, tmp;
-	struct prcm_config *prcm;
-	unsigned long found_speed = 0;
-	unsigned long flags;
-
-	if (clk != &virt_prcm_set)
-		return -EINVAL;
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-
-		if (prcm->mpu_speed <= rate) {
-			found_speed = prcm->mpu_speed;
-			break;
-		}
-	}
-
-	if (!found_speed) {
-		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
-		       rate / 1000000);
-		return -EINVAL;
-	}
-
-	curr_prcm_set = prcm;
-	cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
-
-	if (prcm->dpll_speed == cur_rate / 2) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
-	} else if (prcm->dpll_speed == cur_rate * 2) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-	} else if (prcm->dpll_speed != cur_rate) {
-		local_irq_save(flags);
-
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			bypass = 1;
-
-		if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
-		    CORE_CLK_SRC_DPLL_X2)
-			done_rate = CORE_CLK_SRC_DPLL_X2;
-		else
-			done_rate = CORE_CLK_SRC_DPLL;
-
-		/* MPU divider */
-		cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
-
-		/* dsp + iva1 div(2420), iva2.1(2430) */
-		cm_write_mod_reg(prcm->cm_clksel_dsp,
-				 OMAP24XX_DSP_MOD, CM_CLKSEL);
-
-		cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
-
-		/* Major subsystem dividers */
-		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
-		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
-				 CM_CLKSEL1);
-
-		if (cpu_is_omap2430())
-			cm_write_mod_reg(prcm->cm_clksel_mdm,
-					 OMAP2430_MDM_MOD, CM_CLKSEL);
-
-		/* x2 to enter omap2xxx_sdrc_init_params() */
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
-		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
-			       bypass);
-
-		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
-		omap2xxx_sdrc_reprogram(done_rate, 0);
-
-		local_irq_restore(flags);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Walk PRCM rate table and fillout cpufreq freq_table
- */
-static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
-
-void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	struct prcm_config *prcm;
-	int i = 0;
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		freq_table[i].index = i;
-		freq_table[i].frequency = prcm->mpu_speed / 1000;
-		i++;
-	}
-
-	if (i == 0) {
-		printk(KERN_WARNING "%s: failed to initialize frequency "
-		       "table\n", __func__);
-		return;
-	}
-
-	freq_table[i].index = i;
-	freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	*table = &freq_table[0];
-}
-#endif
-
-static struct clk_functions omap2_clk_functions = {
-	.clk_enable		= omap2_clk_enable,
-	.clk_disable		= omap2_clk_disable,
-	.clk_round_rate		= omap2_clk_round_rate,
-	.clk_set_rate		= omap2_clk_set_rate,
-	.clk_set_parent		= omap2_clk_set_parent,
-	.clk_disable_unused	= omap2_clk_disable_unused,
-#ifdef	CONFIG_CPU_FREQ
-	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
-#endif
-};
-
-static u32 omap2_get_apll_clkin(void)
-{
-	u32 aplls, srate = 0;
-
-	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
-	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
-	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
-
-	if (aplls == APLLS_CLKIN_19_2MHZ)
-		srate = 19200000;
-	else if (aplls == APLLS_CLKIN_13MHZ)
-		srate = 13000000;
-	else if (aplls == APLLS_CLKIN_12MHZ)
-		srate = 12000000;
-
-	return srate;
-}
-
-static u32 omap2_get_sysclkdiv(void)
-{
-	u32 div;
-
-	div = __raw_readl(prcm_clksrc_ctrl);
-	div &= OMAP_SYSCLKDIV_MASK;
-	div >>= OMAP_SYSCLKDIV_SHIFT;
-
-	return div;
-}
-
-static unsigned long omap2_osc_clk_recalc(struct clk *clk)
-{
-	return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
-}
-
-static unsigned long omap2_sys_clk_recalc(struct clk *clk)
-{
-	return clk->parent->rate / omap2_get_sysclkdiv();
-}
-
-/*
- * Set clocks for bypass mode for reboot to work.
- */
-void omap2_clk_prepare_for_reboot(void)
-{
-	u32 rate;
-
-	if (vclk == NULL || sclk == NULL)
-		return;
-
-	rate = clk_get_rate(sclk);
-	clk_set_rate(vclk, rate);
-}
-
-/*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
- */
-static int __init omap2_clk_arch_init(void)
-{
-	if (!mpurate)
-		return -EINVAL;
-
-	if (clk_set_rate(&virt_prcm_set, mpurate))
-		printk(KERN_ERR "Could not find matching MPU rate\n");
-
-	recalculate_root_clocks();
-
-	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
-	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
-	return 0;
-}
-arch_initcall(omap2_clk_arch_init);
-
-int __init omap2_clk_init(void)
-{
-	struct prcm_config *prcm;
-	struct omap_clk *c;
-	u32 clkrate;
-
-	if (cpu_is_omap242x()) {
-		prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
-		cpu_mask = RATE_IN_242X;
-	} else if (cpu_is_omap2430()) {
-		prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
-		cpu_mask = RATE_IN_243X;
-	}
-
-	clk_init(&omap2_clk_functions);
-
-	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
-		clk_preinit(c->lk.clk);
-
-	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
-	propagate_rate(&osc_ck);
-	sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
-	propagate_rate(&sys_ck);
-
-	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
-		if (c->cpu & cpu_mask) {
-			clkdev_add(&c->lk);
-			clk_register(c->lk.clk);
-			omap2_init_clk_clkdm(c->lk.clk);
-		}
-
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			 break;
-	}
-	curr_prcm_set = prcm;
-
-	recalculate_root_clocks();
-
-	printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
-	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable_init_clocks();
-
-	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
new file mode 100644
index 000000000000..d0e3fb7f9298
--- /dev/null
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -0,0 +1,587 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock.c
+ *
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
+ *
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
+ *
+ *  Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ *  Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+#include <linux/bitops.h>
+
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/prcm.h>
+#include <plat/clkdev_omap.h>
+#include <asm/div64.h>
+#include <asm/clkdev.h>
+
+#include <plat/sdrc.h>
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+
+/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
+#define EN_APLL_STOPPED			0
+#define EN_APLL_LOCKED			3
+
+/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
+#define APLLS_CLKIN_19_2MHZ		0
+#define APLLS_CLKIN_13MHZ		2
+#define APLLS_CLKIN_12MHZ		3
+
+/* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
+
+const struct prcm_config *curr_prcm_set;
+const struct prcm_config *rate_table;
+
+struct clk *vclk, *sclk, *dclk;
+
+void __iomem *prcm_clksrc_ctrl;
+
+/*-------------------------------------------------------------------------
+ * Omap24xx specific clock functions
+ *-------------------------------------------------------------------------*/
+
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules.  No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+					   void __iomem **idlest_reg,
+					   u8 *idlest_bit)
+{
+	*idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
+	*idlest_bit = clk->enable_bit;
+}
+
+/* 2430 I2CHS has non-standard IDLEST register */
+const struct clkops clkops_omap2430_i2chs_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap2430_clk_i2chs_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
+ * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
+ *
+ * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
+ * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
+ * (the latter is unusual).  This currently should be called with
+ * struct clk *dpll_ck, which is a composite clock of dpll_ck and
+ * core_ck.
+ */
+unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
+{
+	long long core_clk;
+	u32 v;
+
+	core_clk = omap2_get_dpll_rate(clk);
+
+	v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if (v == CORE_CLK_SRC_32K)
+		core_clk = 32768;
+	else
+		core_clk *= v;
+
+	return core_clk;
+}
+
+static int omap2_enable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(prcm_clksrc_ctrl);
+
+	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+
+	return 0;
+}
+
+static void omap2_disable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(prcm_clksrc_ctrl);
+
+	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+}
+
+const struct clkops clkops_oscck = {
+	.enable		= omap2_enable_osc_ck,
+	.disable	= omap2_disable_osc_ck,
+};
+
+#ifdef OLD_CK
+/* Recalculate SYST_CLK */
+static void omap2_sys_clk_recalc(struct clk *clk)
+{
+	u32 div = PRCM_CLKSRC_CTRL;
+	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
+	div >>= clk->rate_offset;
+	clk->rate = (clk->parent->rate / div);
+	propagate_rate(clk);
+}
+#endif	/* OLD_CK */
+
+/* Enable an APLL if off */
+static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
+{
+	u32 cval, apll_mask;
+
+	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+
+	if ((cval & apll_mask) == apll_mask)
+		return 0;   /* apll already enabled */
+
+	cval &= ~apll_mask;
+	cval |= apll_mask;
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+
+	omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), status_mask,
+			     clk->name);
+
+	/*
+	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
+	 * fails?
+	 */
+	return 0;
+}
+
+static int omap2_clk_apll96_enable(struct clk *clk)
+{
+	return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL);
+}
+
+static int omap2_clk_apll54_enable(struct clk *clk)
+{
+	return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL);
+}
+
+/* Stop APLL */
+static void omap2_clk_apll_disable(struct clk *clk)
+{
+	u32 cval;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+}
+
+const struct clkops clkops_apll96 = {
+	.enable		= omap2_clk_apll96_enable,
+	.disable	= omap2_clk_apll_disable,
+};
+
+const struct clkops clkops_apll54 = {
+	.enable		= omap2_clk_apll54_enable,
+	.disable	= omap2_clk_apll_disable,
+};
+
+/*
+ * Uses the current prcm set to tell if a rate is valid.
+ * You can go slower, but not faster within a given rate set.
+ */
+long omap2_dpllcore_round_rate(unsigned long target_rate)
+{
+	u32 high, low, core_clk_src;
+
+	core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
+		high = curr_prcm_set->dpll_speed * 2;
+		low = curr_prcm_set->dpll_speed;
+	} else {				/* DPLL clockout x 2 */
+		high = curr_prcm_set->dpll_speed;
+		low = curr_prcm_set->dpll_speed / 2;
+	}
+
+#ifdef DOWN_VARIABLE_DPLL
+	if (target_rate > high)
+		return high;
+	else
+		return target_rate;
+#else
+	if (target_rate > low)
+		return high;
+	else
+		return low;
+#endif
+
+}
+
+unsigned long omap2_dpllcore_recalc(struct clk *clk)
+{
+	return omap2xxx_clk_get_core_rate(clk);
+}
+
+int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, low, mult, div, valid_rate, done_rate;
+	u32 bypass = 0;
+	struct prcm_config tmpset;
+	const struct dpll_data *dd;
+
+	cur_rate = omap2xxx_clk_get_core_rate(dclk);
+	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if ((rate == (cur_rate / 2)) && (mult == 2)) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
+	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (rate != cur_rate) {
+		valid_rate = omap2_dpllcore_round_rate(rate);
+		if (valid_rate != rate)
+			return -EINVAL;
+
+		if (mult == 1)
+			low = curr_prcm_set->dpll_speed;
+		else
+			low = curr_prcm_set->dpll_speed / 2;
+
+		dd = clk->dpll_data;
+		if (!dd)
+			return -EINVAL;
+
+		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
+		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
+					   dd->div1_mask);
+		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
+		tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
+		if (rate > low) {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
+			mult = ((rate / 2) / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		} else {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
+			mult = (rate / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL;
+		}
+		tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
+		tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
+
+		/* Worst case */
+		tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
+
+		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
+			bypass = 1;
+
+		/* For omap2xxx_sdrc_init_params() */
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+
+		/* Force dll lock mode */
+		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
+			       bypass);
+
+		/* Errata: ret dll entry state */
+		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+		omap2xxx_sdrc_reprogram(done_rate, 0);
+	}
+
+	return 0;
+}
+
+/**
+ * omap2_table_mpu_recalc - just return the MPU speed
+ * @clk: virt_prcm_set struct clk
+ *
+ * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
+ */
+unsigned long omap2_table_mpu_recalc(struct clk *clk)
+{
+	return curr_prcm_set->mpu_speed;
+}
+
+/*
+ * Look for a rate equal or less than the target rate given a configuration set.
+ *
+ * What's not entirely clear is "which" field represents the key field.
+ * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
+ * just uses the ARM rates.
+ */
+long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
+{
+	const struct prcm_config *ptr;
+	long highest_rate;
+	long sys_ck_rate;
+
+	sys_ck_rate = clk_get_rate(sclk);
+
+	highest_rate = -EINVAL;
+
+	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
+		if (!(ptr->flags & cpu_mask))
+			continue;
+		if (ptr->xtal_speed != sys_ck_rate)
+			continue;
+
+		highest_rate = ptr->mpu_speed;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->mpu_speed <= rate)
+			break;
+	}
+	return highest_rate;
+}
+
+/* Sets basic clocks based on the specified rate */
+int omap2_select_table_rate(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, done_rate, bypass = 0, tmp;
+	const struct prcm_config *prcm;
+	unsigned long found_speed = 0;
+	unsigned long flags;
+	long sys_ck_rate;
+
+	sys_ck_rate = clk_get_rate(sclk);
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+
+		if (prcm->xtal_speed != sys_ck_rate)
+			continue;
+
+		if (prcm->mpu_speed <= rate) {
+			found_speed = prcm->mpu_speed;
+			break;
+		}
+	}
+
+	if (!found_speed) {
+		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
+		       rate / 1000000);
+		return -EINVAL;
+	}
+
+	curr_prcm_set = prcm;
+	cur_rate = omap2xxx_clk_get_core_rate(dclk);
+
+	if (prcm->dpll_speed == cur_rate / 2) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
+	} else if (prcm->dpll_speed == cur_rate * 2) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (prcm->dpll_speed != cur_rate) {
+		local_irq_save(flags);
+
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			bypass = 1;
+
+		if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
+		    CORE_CLK_SRC_DPLL_X2)
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		else
+			done_rate = CORE_CLK_SRC_DPLL;
+
+		/* MPU divider */
+		cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
+
+		/* dsp + iva1 div(2420), iva2.1(2430) */
+		cm_write_mod_reg(prcm->cm_clksel_dsp,
+				 OMAP24XX_DSP_MOD, CM_CLKSEL);
+
+		cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
+
+		/* Major subsystem dividers */
+		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
+		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
+				 CM_CLKSEL1);
+
+		if (cpu_is_omap2430())
+			cm_write_mod_reg(prcm->cm_clksel_mdm,
+					 OMAP2430_MDM_MOD, CM_CLKSEL);
+
+		/* x2 to enter omap2xxx_sdrc_init_params() */
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+
+		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
+			       bypass);
+
+		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+		omap2xxx_sdrc_reprogram(done_rate, 0);
+
+		local_irq_restore(flags);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Walk PRCM rate table and fillout cpufreq freq_table
+ */
+static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
+
+void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	struct prcm_config *prcm;
+	int i = 0;
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+
+		/* don't put bypass rates in table */
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			continue;
+
+		freq_table[i].index = i;
+		freq_table[i].frequency = prcm->mpu_speed / 1000;
+		i++;
+	}
+
+	if (i == 0) {
+		printk(KERN_WARNING "%s: failed to initialize frequency "
+		       "table\n", __func__);
+		return;
+	}
+
+	freq_table[i].index = i;
+	freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	*table = &freq_table[0];
+}
+#endif
+
+struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
+#ifdef	CONFIG_CPU_FREQ
+	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
+#endif
+};
+
+static u32 omap2_get_apll_clkin(void)
+{
+	u32 aplls, srate = 0;
+
+	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
+	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
+
+	if (aplls == APLLS_CLKIN_19_2MHZ)
+		srate = 19200000;
+	else if (aplls == APLLS_CLKIN_13MHZ)
+		srate = 13000000;
+	else if (aplls == APLLS_CLKIN_12MHZ)
+		srate = 12000000;
+
+	return srate;
+}
+
+static u32 omap2_get_sysclkdiv(void)
+{
+	u32 div;
+
+	div = __raw_readl(prcm_clksrc_ctrl);
+	div &= OMAP_SYSCLKDIV_MASK;
+	div >>= OMAP_SYSCLKDIV_SHIFT;
+
+	return div;
+}
+
+unsigned long omap2_osc_clk_recalc(struct clk *clk)
+{
+	return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
+}
+
+unsigned long omap2_sys_clk_recalc(struct clk *clk)
+{
+	return clk->parent->rate / omap2_get_sysclkdiv();
+}
+
+/*
+ * Set clocks for bypass mode for reboot to work.
+ */
+void omap2_clk_prepare_for_reboot(void)
+{
+	u32 rate;
+
+	if (vclk == NULL || sclk == NULL)
+		return;
+
+	rate = clk_get_rate(sclk);
+	clk_set_rate(vclk, rate);
+}
+
+/*
+ * Switch the MPU rate if specified on cmdline.
+ * We cannot do this early until cmdline is parsed.
+ */
+static int __init omap2_clk_arch_init(void)
+{
+	struct clk *virt_prcm_set, *sys_ck, *dpll_ck, *mpu_ck;
+	unsigned long sys_ck_rate;
+
+	if (!mpurate)
+		return -EINVAL;
+
+	virt_prcm_set = clk_get(NULL, "virt_prcm_set");
+	sys_ck = clk_get(NULL, "sys_ck");
+	dpll_ck = clk_get(NULL, "dpll_ck");
+	mpu_ck = clk_get(NULL, "mpu_ck");
+
+	if (clk_set_rate(virt_prcm_set, mpurate))
+		printk(KERN_ERR "Could not find matching MPU rate\n");
+
+	recalculate_root_clocks();
+
+	sys_ck_rate = clk_get_rate(sys_ck);
+
+	pr_info("Switched to new clocking rate (Crystal/DPLL/MPU): "
+		"%ld.%01ld/%ld/%ld MHz\n",
+		(sys_ck_rate / 1000000), (sys_ck_rate / 100000) % 10,
+		(clk_get_rate(dpll_ck) / 1000000),
+		(clk_get_rate(mpu_ck) / 1000000));
+
+	return 0;
+}
+arch_initcall(omap2_clk_arch_init);
+
+
diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h
new file mode 100644
index 000000000000..e35efde4bd80
--- /dev/null
+++ b/arch/arm/mach-omap2/clock2xxx.h
@@ -0,0 +1,41 @@
+/*
+ * OMAP2 clock function prototypes and macros
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
+
+unsigned long omap2_table_mpu_recalc(struct clk *clk);
+int omap2_select_table_rate(struct clk *clk, unsigned long rate);
+long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
+unsigned long omap2_sys_clk_recalc(struct clk *clk);
+unsigned long omap2_osc_clk_recalc(struct clk *clk);
+unsigned long omap2_sys_clk_recalc(struct clk *clk);
+unsigned long omap2_dpllcore_recalc(struct clk *clk);
+int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
+unsigned long omap2xxx_clk_get_core_rate(struct clk *clk);
+
+/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
+#ifdef CONFIG_ARCH_OMAP2420
+#define OMAP_CM_REGADDR			OMAP2420_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2420_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2420_PRCM_CLKEMUL_CTRL
+#else
+#define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2430_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2430_PRCM_CLKEMUL_CTRL
+#endif
+
+extern void __iomem *prcm_clksrc_ctrl;
+
+extern struct clk *dclk;
+
+extern const struct clkops clkops_omap2430_i2chs_wait;
+extern const struct clkops clkops_oscck;
+extern const struct clkops clkops_apll96;
+extern const struct clkops clkops_apll54;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock2xxx_data.c
index d19cf7a7d8db..97dc7cf7751d 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock2xxx_data.c
@@ -1,8 +1,8 @@
 /*
- *  linux/arch/arm/mach-omap2/clock24xx.h
+ *  linux/arch/arm/mach-omap2/clock2xxx_data.c
  *
- *  Copyright (C) 2005-2008 Texas Instruments, Inc.
- *  Copyright (C) 2004-2008 Nokia Corporation
+ *  Copyright (C) 2005-2009 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2009 Nokia Corporation
  *
  *  Contacts:
  *  Richard Woodruff <r-woodruff2@ti.com>
@@ -13,600 +13,21 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
 
-#include "clock.h"
+#include <plat/clkdev_omap.h>
 
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
 #include "prm.h"
 #include "cm.h"
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 
-/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
-#ifdef CONFIG_ARCH_OMAP2420
-#define OMAP_CM_REGADDR			OMAP2420_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2420_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2420_PRCM_CLKEMUL_CTRL
-#else
-#define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2430_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2430_PRCM_CLKEMUL_CTRL
-#endif
-
-static unsigned long omap2_table_mpu_recalc(struct clk *clk);
-static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
-static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
-static unsigned long omap2_sys_clk_recalc(struct clk *clk);
-static unsigned long omap2_osc_clk_recalc(struct clk *clk);
-static unsigned long omap2_sys_clk_recalc(struct clk *clk);
-static unsigned long omap2_dpllcore_recalc(struct clk *clk);
-static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
-
-/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
- * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- */
-struct prcm_config {
-	unsigned long xtal_speed;	/* crystal rate */
-	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
-	unsigned long mpu_speed;	/* speed of MPU */
-	unsigned long cm_clksel_mpu;	/* mpu divider */
-	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
-	unsigned long cm_clksel_gfx;	/* gfx dividers */
-	unsigned long cm_clksel1_core;	/* major subsystem dividers */
-	unsigned long cm_clksel1_pll;	/* m,n */
-	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
-	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
-	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
-	unsigned char flags;
-};
-
-/*
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
- */
-
-/* Core fields for cm_clksel, not ratio governed */
-#define RX_CLKSEL_DSS1			(0x10 << 8)
-#define RX_CLKSEL_DSS2			(0x0 << 13)
-#define RX_CLKSEL_SSI			(0x5 << 20)
-
-/*-------------------------------------------------------------------------
- * Voltage/DPLL ratios
- *-------------------------------------------------------------------------*/
-
-/* 2430 Ratio's, 2430-Ratio Config 1 */
-#define R1_CLKSEL_L3			(4 << 0)
-#define R1_CLKSEL_L4			(2 << 5)
-#define R1_CLKSEL_USB			(4 << 25)
-#define R1_CM_CLKSEL1_CORE_VAL		R1_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					R1_CLKSEL_L4 | R1_CLKSEL_L3
-#define R1_CLKSEL_MPU			(2 << 0)
-#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
-#define R1_CLKSEL_DSP			(2 << 0)
-#define R1_CLKSEL_DSP_IF		(2 << 5)
-#define R1_CM_CLKSEL_DSP_VAL		R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
-#define R1_CLKSEL_GFX			(2 << 0)
-#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
-#define R1_CLKSEL_MDM			(4 << 0)
-#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
-
-/* 2430-Ratio Config 2 */
-#define R2_CLKSEL_L3			(6 << 0)
-#define R2_CLKSEL_L4			(2 << 5)
-#define R2_CLKSEL_USB			(2 << 25)
-#define R2_CM_CLKSEL1_CORE_VAL		R2_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					R2_CLKSEL_L4 | R2_CLKSEL_L3
-#define R2_CLKSEL_MPU			(2 << 0)
-#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
-#define R2_CLKSEL_DSP			(2 << 0)
-#define R2_CLKSEL_DSP_IF		(3 << 5)
-#define R2_CM_CLKSEL_DSP_VAL		R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
-#define R2_CLKSEL_GFX			(2 << 0)
-#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
-#define R2_CLKSEL_MDM			(6 << 0)
-#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
-
-/* 2430-Ratio Bootm (BYPASS) */
-#define RB_CLKSEL_L3			(1 << 0)
-#define RB_CLKSEL_L4			(1 << 5)
-#define RB_CLKSEL_USB			(1 << 25)
-#define RB_CM_CLKSEL1_CORE_VAL		RB_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RB_CLKSEL_L4 | RB_CLKSEL_L3
-#define RB_CLKSEL_MPU			(1 << 0)
-#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
-#define RB_CLKSEL_DSP			(1 << 0)
-#define RB_CLKSEL_DSP_IF		(1 << 5)
-#define RB_CM_CLKSEL_DSP_VAL		RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
-#define RB_CLKSEL_GFX			(1 << 0)
-#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
-#define RB_CLKSEL_MDM			(1 << 0)
-#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
-
-/* 2420 Ratio Equivalents */
-#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
-#define RXX_CLKSEL_SSI			(0x8 << 20)
-
-/* 2420-PRCM III 532MHz core */
-#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
-#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
-#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
-#define RIII_CM_CLKSEL1_CORE_VAL	RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
-					RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
-					RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
-					RIII_CLKSEL_L3
-#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
-#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
-#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
-#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
-#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
-#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
-#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
-#define RIII_CM_CLKSEL_DSP_VAL		RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
-					RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
-					RIII_CLKSEL_DSP
-#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
-#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
-
-/* 2420-PRCM II 600MHz core */
-#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
-#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
-#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
-#define RII_CM_CLKSEL1_CORE_VAL		RII_CLKSEL_USB | \
-					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RII_CLKSEL_L4 | RII_CLKSEL_L3
-#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
-#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
-#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
-#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
-#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
-#define RII_CLKSEL_IVA			(3 << 8)	/* iva1 - 200MHz */
-#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
-#define RII_CM_CLKSEL_DSP_VAL		RII_SYNC_IVA | RII_CLKSEL_IVA | \
-					RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
-					RII_CLKSEL_DSP
-#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
-#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
-
-/* 2420-PRCM I 660MHz core */
-#define RI_CLKSEL_L3			(4 << 0)	/* 165MHz */
-#define RI_CLKSEL_L4			(2 << 5)	/* 82.5MHz */
-#define RI_CLKSEL_USB			(4 << 25)	/* 41.25MHz */
-#define RI_CM_CLKSEL1_CORE_VAL		RI_CLKSEL_USB | \
-					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RI_CLKSEL_L4 | RI_CLKSEL_L3
-#define RI_CLKSEL_MPU			(2 << 0)	/* 330MHz */
-#define RI_CM_CLKSEL_MPU_VAL		RI_CLKSEL_MPU
-#define RI_CLKSEL_DSP			(3 << 0)	/* c5x - 220MHz */
-#define RI_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 110MHz */
-#define RI_SYNC_DSP			(1 << 7)	/* Activate sync */
-#define RI_CLKSEL_IVA			(4 << 8)	/* iva1 - 165MHz */
-#define RI_SYNC_IVA			(0 << 13)	/* Bypass sync */
-#define RI_CM_CLKSEL_DSP_VAL		RI_SYNC_IVA | RI_CLKSEL_IVA | \
-					RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
-					RI_CLKSEL_DSP
-#define RI_CLKSEL_GFX			(1 << 0)	/* 165MHz */
-#define RI_CM_CLKSEL_GFX_VAL		RI_CLKSEL_GFX
-
-/* 2420-PRCM VII (boot) */
-#define RVII_CLKSEL_L3			(1 << 0)
-#define RVII_CLKSEL_L4			(1 << 5)
-#define RVII_CLKSEL_DSS1		(1 << 8)
-#define RVII_CLKSEL_DSS2		(0 << 13)
-#define RVII_CLKSEL_VLYNQ		(1 << 15)
-#define RVII_CLKSEL_SSI			(1 << 20)
-#define RVII_CLKSEL_USB			(1 << 25)
-
-#define RVII_CM_CLKSEL1_CORE_VAL	RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
-					RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
-					RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
-
-#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
-#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
-
-#define RVII_CLKSEL_DSP			(1 << 0)
-#define RVII_CLKSEL_DSP_IF		(1 << 5)
-#define RVII_SYNC_DSP			(0 << 7)
-#define RVII_CLKSEL_IVA			(1 << 8)
-#define RVII_SYNC_IVA			(0 << 13)
-#define RVII_CM_CLKSEL_DSP_VAL		RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
-					RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
-
-#define RVII_CLKSEL_GFX			(1 << 0)
-#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
-
-/*-------------------------------------------------------------------------
- * 2430 Target modes: Along with each configuration the CPU has several
- * modes which goes along with them. Modes mainly are the addition of
- * describe DPLL combinations to go along with a ratio.
- *-------------------------------------------------------------------------*/
-
-/* Hardware governed */
-#define MX_48M_SRC			(0 << 3)
-#define MX_54M_SRC			(0 << 5)
-#define MX_APLLS_CLIKIN_12		(3 << 23)
-#define MX_APLLS_CLIKIN_13		(2 << 23)
-#define MX_APLLS_CLIKIN_19_2		(0 << 23)
-
-/*
- * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
- * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
- */
-#define M5A_DPLL_MULT_12		(133 << 12)
-#define M5A_DPLL_DIV_12			(5 << 8)
-#define M5A_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M5A_DPLL_MULT_13		(61 << 12)
-#define M5A_DPLL_DIV_13			(2 << 8)
-#define M5A_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M5A_DPLL_MULT_19		(55 << 12)
-#define M5A_DPLL_DIV_19			(3 << 8)
-#define M5A_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
-#define M5B_DPLL_MULT_12		(50 << 12)
-#define M5B_DPLL_DIV_12			(2 << 8)
-#define M5B_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M5B_DPLL_MULT_13		(200 << 12)
-#define M5B_DPLL_DIV_13			(12 << 8)
-
-#define M5B_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M5B_DPLL_MULT_19		(125 << 12)
-#define M5B_DPLL_DIV_19			(31 << 8)
-#define M5B_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/*
- * #4	(ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
- */
-#define M4_DPLL_MULT_12			(133 << 12)
-#define M4_DPLL_DIV_12			(3 << 8)
-#define M4_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-
-#define M4_DPLL_MULT_13			(399 << 12)
-#define M4_DPLL_DIV_13			(12 << 8)
-#define M4_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-#define M4_DPLL_MULT_19			(145 << 12)
-#define M4_DPLL_DIV_19			(6 << 8)
-#define M4_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-
-/*
- * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
- */
-#define M3_DPLL_MULT_12			(55 << 12)
-#define M3_DPLL_DIV_12			(1 << 8)
-#define M3_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M3_DPLL_MULT_13			(76 << 12)
-#define M3_DPLL_DIV_13			(2 << 8)
-#define M3_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M3_DPLL_MULT_19			(17 << 12)
-#define M3_DPLL_DIV_19			(0 << 8)
-#define M3_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-
-/*
- * #2   (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
- */
-#define M2_DPLL_MULT_12		        (55 << 12)
-#define M2_DPLL_DIV_12		        (1 << 8)
-#define M2_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-
-/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
- * relock time issue */
-/* Core frequency changed from 330/165 to 329/164 MHz*/
-#define M2_DPLL_MULT_13		        (76 << 12)
-#define M2_DPLL_DIV_13		        (2 << 8)
-#define M2_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-#define M2_DPLL_MULT_19		        (17 << 12)
-#define M2_DPLL_DIV_19		        (0 << 8)
-#define M2_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-
-/* boot (boot) */
-#define MB_DPLL_MULT			(1 << 12)
-#define MB_DPLL_DIV			(0 << 8)
-#define MB_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_12
-
-#define MB_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_13
-
-#define MB_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_19
-
-/*
- * 2430 - chassis (sedna)
- * 165 (ratio1) same as above #2
- * 150 (ratio1)
- * 133 (ratio2) same as above #4
- * 110 (ratio2) same as above #3
- * 104 (ratio2)
- * boot (boot)
- */
-
-/* PRCM I target DPLL = 2*330MHz = 660MHz */
-#define MI_DPLL_MULT_12			(55 << 12)
-#define MI_DPLL_DIV_12			(1 << 8)
-#define MI_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-
-/*
- * 2420 Equivalent - mode registers
- * PRCM II , target DPLL = 2*300MHz = 600MHz
- */
-#define MII_DPLL_MULT_12		(50 << 12)
-#define MII_DPLL_DIV_12			(1 << 8)
-#define MII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define MII_DPLL_MULT_13		(300 << 12)
-#define MII_DPLL_DIV_13			(12 << 8)
-#define MII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-/* PRCM III target DPLL = 2*266 = 532MHz*/
-#define MIII_DPLL_MULT_12		(133 << 12)
-#define MIII_DPLL_DIV_12		(5 << 8)
-#define MIII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define MIII_DPLL_MULT_13		(266 << 12)
-#define MIII_DPLL_DIV_13		(12 << 8)
-#define MIII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-/* PRCM VII (boot bypass) */
-#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
-#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
-
-/* High and low operation value */
-#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
-#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
-
-/* MPU speed defines */
-#define S12M	12000000
-#define S13M	13000000
-#define S19M	19200000
-#define S26M	26000000
-#define S100M	100000000
-#define S133M	133000000
-#define S150M	150000000
-#define S164M	164000000
-#define S165M	165000000
-#define S199M	199000000
-#define S200M	200000000
-#define S266M	266000000
-#define S300M	300000000
-#define S329M	329000000
-#define S330M	330000000
-#define S399M	399000000
-#define S400M	400000000
-#define S532M	532000000
-#define S600M	600000000
-#define S658M	658000000
-#define S660M	660000000
-#define S798M	798000000
-
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
- * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
- * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
- *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used.	Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set.	 The exception is the bypass setting which is
- * availble for low power bypass.
- *
- * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
-static struct prcm_config rate_table[] = {
-	/* PRCM I - FAST */
-	{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
-		RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
-		RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
-		RATE_IN_242X},
-
-	/* PRCM II - FAST */
-	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - FAST */
-	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM II - SLOW */
-	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - SLOW */
-	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	/* PRCM #4 - ratio2 (ES2.1) - FAST */
-	{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL,		/* 399MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #2 - ratio1 (ES2) - FAST */
-	{S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_165MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - FAST */
-	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - FAST */
-	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM #4 - ratio1 (ES2.1) - SLOW */
-	{S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #2 - ratio1 (ES2) - SLOW */
-	{S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_165MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - SLOW */
-	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - SLOW*/
-	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
-};
-
 /*-------------------------------------------------------------------------
  * 24xx clock tree.
  *
@@ -708,7 +129,7 @@ static struct clk dpll_ck = {
 
 static struct clk apll96_ck = {
 	.name		= "apll96_ck",
-	.ops		= &clkops_fixed,
+	.ops		= &clkops_apll96,
 	.parent		= &sys_ck,
 	.rate		= 96000000,
 	.flags		= RATE_FIXED | ENABLE_ON_INIT,
@@ -719,7 +140,7 @@ static struct clk apll96_ck = {
 
 static struct clk apll54_ck = {
 	.name		= "apll54_ck",
-	.ops		= &clkops_fixed,
+	.ops		= &clkops_apll54,
 	.parent		= &sys_ck,
 	.rate		= 54000000,
 	.flags		= RATE_FIXED | ENABLE_ON_INIT,
@@ -2653,5 +2074,236 @@ static struct clk virt_prcm_set = {
 	.round_rate	= &omap2_round_to_table_rate,
 };
 
-#endif
+
+/*
+ * clkdev integration
+ */
+
+static struct omap_clk omap24xx_clks[] = {
+	/* external root sources */
+	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
+	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X | CK_242X),
+	/* internal analog sources */
+	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"apll54_ck",	&apll54_ck,	CK_243X | CK_242X),
+	/* internal prcm root sources */
+	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"core_ck",	&core_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"ck_wdt1_osc",	&wdt1_osc_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
+	CLK(NULL,	"sys_clkout",	&sys_clkout,	CK_243X | CK_242X),
+	CLK(NULL,	"sys_clkout2_src", &sys_clkout2_src, CK_242X),
+	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_242X),
+	CLK(NULL,	"emul_ck",	&emul_ck,	CK_242X),
+	/* mpu domain clocks */
+	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_243X | CK_242X),
+	/* dsp domain clocks */
+	CLK(NULL,	"dsp_fck",	&dsp_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
+	CLK(NULL,	"dsp_ick",	&dsp_ick,	CK_242X),
+	CLK(NULL,	"iva2_1_ick",	&iva2_1_ick,	CK_243X),
+	CLK(NULL,	"iva1_ifck",	&iva1_ifck,	CK_242X),
+	CLK(NULL,	"iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
+	/* GFX domain clocks */
+	CLK(NULL,	"gfx_3d_fck",	&gfx_3d_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_243X | CK_242X),
+	/* Modem domain clocks */
+	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
+	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
+	/* DSS domain clocks */
+	CLK("omapdss",	"ick",		&dss_ick,	CK_243X | CK_242X),
+	CLK("omapdss",	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
+	CLK("omapdss",	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
+	CLK("omapdss",	"tv_fck",	&dss_54m_fck,	CK_243X | CK_242X),
+	/* L3 domain clocks */
+	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X | CK_242X),
+	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_243X | CK_242X),
+	/* L4 domain clocks */
+	CLK(NULL,	"l4_ck",	&l4_ck,		CK_243X | CK_242X),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_243X | CK_242X),
+	/* virtual meta-group clock */
+	CLK(NULL,	"virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
+	/* general l4 interface ck, multi-parent functional clk */
+	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_243X),
+	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_243X),
+	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_243X),
+	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_243X),
+	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_243X),
+	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_243X),
+	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_243X),
+	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_243X),
+	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X | CK_242X),
+	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_243X | CK_242X),
+	CLK("omap_wdt",	"fck",		&mpu_wdt_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"icr_ick",	&icr_ick,	CK_243X),
+	CLK("omap24xxcam", "fck",	&cam_fck,	CK_243X | CK_242X),
+	CLK("omap24xxcam", "ick",	&cam_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_242X),
+	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_242X),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_243X | CK_242X),
+	CLK("mmci-omap.0", "ick",	&mmc_ick,	CK_242X),
+	CLK("mmci-omap.0", "fck",	&mmc_fck,	CK_242X),
+	CLK(NULL,	"fac_ick",	&fac_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
+	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
+	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X | CK_242X),
+	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X | CK_242X),
+	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_243X | CK_242X),
+	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_242X),
+	CLK("i2c_omap.1", "fck",	&i2chs1_fck,	CK_243X),
+	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_243X | CK_242X),
+	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_242X),
+	CLK("i2c_omap.2", "fck",	&i2chs2_fck,	CK_243X),
+	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"vlynq_ick",	&vlynq_ick,	CK_242X),
+	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
+	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_243X),
+	CLK(NULL,	"des_ick",	&des_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"sha_ick",	&sha_ick,	CK_243X | CK_242X),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
+	CLK("musb_hdrc",	"ick",	&usbhs_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
+	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),
+	CLK("mmci-omap-hs.1", "fck",	&mmchs2_fck,	CK_243X),
+	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
+	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
+	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
+	CLK("mmci-omap-hs.1", "mmchsdb_fck", 	&mmchsdb2_fck,	CK_243X),
+};
+
+/*
+ * init code
+ */
+
+int __init omap2_clk_init(void)
+{
+	const struct prcm_config *prcm;
+	struct omap_clk *c;
+	u32 clkrate;
+	u16 cpu_clkflg;
+
+	if (cpu_is_omap242x()) {
+		prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
+		cpu_mask = RATE_IN_242X;
+		cpu_clkflg = CK_242X;
+		rate_table = omap2420_rate_table;
+	} else if (cpu_is_omap2430()) {
+		prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
+		cpu_mask = RATE_IN_243X;
+		cpu_clkflg = CK_243X;
+		rate_table = omap2430_rate_table;
+	}
+
+	clk_init(&omap2_clk_functions);
+
+	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+		clk_preinit(c->lk.clk);
+
+	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
+	propagate_rate(&osc_ck);
+	sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
+	propagate_rate(&sys_ck);
+
+	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+		if (c->cpu & cpu_clkflg) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
+			omap2_init_clk_clkdm(c->lk.clk);
+		}
+
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			break;
+	}
+	curr_prcm_set = prcm;
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+	dclk = clk_get(NULL, "dpll_ck");
+
+	return 0;
+}
 
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 7c5c00df3c70..ded32364f32b 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -27,317 +27,24 @@
 #include <linux/limits.h>
 #include <linux/bitops.h>
 
-#include <mach/cpu.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "clock.h"
+#include "clock34xx.h"
+#include "sdrc.h"
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 #include "cm.h"
 #include "cm-regbits-34xx.h"
 
-static const struct clkops clkops_noncore_dpll_ops;
-
-static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
-					    void __iomem **idlest_reg,
-					    u8 *idlest_bit);
-static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
-					    void __iomem **idlest_reg,
-					    u8 *idlest_bit);
-static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
-						    void __iomem **idlest_reg,
-						    u8 *idlest_bit);
-
-static const struct clkops clkops_omap3430es2_ssi_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-static const struct clkops clkops_omap3430es2_hsotgusb_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-static const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-#include "clock34xx.h"
-
-struct omap_clk {
-	u32		cpu;
-	struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck, cp) 		\
-	{				\
-		 .cpu = cp,		\
-		.lk = {			\
-			.dev_id = dev,	\
-			.con_id = con,	\
-			.clk = ck,	\
-		},			\
-	}
-
-#define CK_343X		(1 << 0)
-#define CK_3430ES1	(1 << 1)
-#define CK_3430ES2	(1 << 2)
-
-static struct omap_clk omap34xx_clks[] = {
-	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_343X),
-	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_343X),
-	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_343X),
-	CLK(NULL,	"virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2),
-	CLK(NULL,	"virt_19_2m_ck", &virt_19_2m_ck, CK_343X),
-	CLK(NULL,	"virt_26m_ck",	&virt_26m_ck,	CK_343X),
-	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_343X),
-	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_343X),
-	CLK(NULL,	"sys_ck",	&sys_ck,	CK_343X),
-	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_343X),
-	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_343X),
-	CLK(NULL,	"sys_clkout1",	&sys_clkout1,	CK_343X),
-	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_343X),
-	CLK(NULL,	"dpll1_x2_ck",	&dpll1_x2_ck,	CK_343X),
-	CLK(NULL,	"dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X),
-	CLK(NULL,	"dpll2_ck",	&dpll2_ck,	CK_343X),
-	CLK(NULL,	"dpll2_m2_ck",	&dpll2_m2_ck,	CK_343X),
-	CLK(NULL,	"dpll3_ck",	&dpll3_ck,	CK_343X),
-	CLK(NULL,	"core_ck",	&core_ck,	CK_343X),
-	CLK(NULL,	"dpll3_x2_ck",	&dpll3_x2_ck,	CK_343X),
-	CLK(NULL,	"dpll3_m2_ck",	&dpll3_m2_ck,	CK_343X),
-	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
-	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_343X),
-	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
-	CLK(NULL,	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
-	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_343X),
-	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_343X),
-	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
-	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_343X),
-	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_343X),
-	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_343X),
-	CLK(NULL,	"omap_48m_fck",	&omap_48m_fck,	CK_343X),
-	CLK(NULL,	"omap_12m_fck",	&omap_12m_fck,	CK_343X),
-	CLK(NULL,	"dpll4_m2_ck",	&dpll4_m2_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X),
-	CLK(NULL,	"dpll4_m3_ck",	&dpll4_m3_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X),
-	CLK(NULL,	"dpll4_m4_ck",	&dpll4_m4_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X),
-	CLK(NULL,	"dpll4_m5_ck",	&dpll4_m5_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
-	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
-	CLK(NULL,	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
-	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2),
-	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2),
-	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_343X),
-	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_343X),
-	CLK(NULL,	"corex2_fck",	&corex2_fck,	CK_343X),
-	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_343X),
-	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_343X),
-	CLK(NULL,	"arm_fck",	&arm_fck,	CK_343X),
-	CLK(NULL,	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
-	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_343X),
-	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_343X),
-	CLK(NULL,	"l3_ick",	&l3_ick,	CK_343X),
-	CLK(NULL,	"l4_ick",	&l4_ick,	CK_343X),
-	CLK(NULL,	"rm_ick",	&rm_ick,	CK_343X),
-	CLK(NULL,	"gfx_l3_ck",	&gfx_l3_ck,	CK_3430ES1),
-	CLK(NULL,	"gfx_l3_fck",	&gfx_l3_fck,	CK_3430ES1),
-	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
-	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
-	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
-	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2),
-	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2),
-	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
-	CLK(NULL,	"modem_fck",	&modem_fck,	CK_343X),
-	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_343X),
-	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_343X),
-	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_343X),
-	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_343X),
-	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2),
-	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2),
-	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2),
-	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_343X),
-	CLK("mmci-omap-hs.2",	"fck",	&mmchs3_fck,	CK_3430ES2),
-	CLK("mmci-omap-hs.1",	"fck",	&mmchs2_fck,	CK_343X),
-	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_343X),
-	CLK("mmci-omap-hs.0",	"fck",	&mmchs1_fck,	CK_343X),
-	CLK("i2c_omap.3", "fck",	&i2c3_fck,	CK_343X),
-	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_343X),
-	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_343X),
-	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_343X),
-	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_343X),
-	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_343X),
-	CLK("omap2_mcspi.4", "fck",	&mcspi4_fck,	CK_343X),
-	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_343X),
-	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_343X),
-	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_343X),
-	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_343X),
-	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_343X),
-	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
-	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_343X),
-	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_343X),
-	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2),
-	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es2,	CK_3430ES2),
-	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
-	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
-	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2),
-	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
-	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
-	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
-	CLK(NULL,	"pka_ick",	&pka_ick,	CK_343X),
-	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_343X),
-	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2),
-	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2),
-	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
-	CLK(NULL,	"aes2_ick",	&aes2_ick,	CK_343X),
-	CLK(NULL,	"sha12_ick",	&sha12_ick,	CK_343X),
-	CLK(NULL,	"des2_ick",	&des2_ick,	CK_343X),
-	CLK("mmci-omap-hs.1",	"ick",	&mmchs2_ick,	CK_343X),
-	CLK("mmci-omap-hs.0",	"ick",	&mmchs1_ick,	CK_343X),
-	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_343X),
-	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_343X),
-	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_343X),
-	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_343X),
-	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_343X),
-	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_343X),
-	CLK("i2c_omap.3", "ick",	&i2c3_ick,	CK_343X),
-	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_343X),
-	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_343X),
-	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_343X),
-	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_343X),
-	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_343X),
-	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_343X),
-	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_343X),
-	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_343X),
-	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
-	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
-	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_343X),
-	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_343X),
-	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es2,	CK_3430ES2),
-	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
-	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
-	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
-	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
-	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
-	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
-	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
-	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2),
-	CLK("omapfb",	"tv_fck",	&dss_tv_fck,	CK_343X),
-	CLK("omapfb",	"video_fck",	&dss_96m_fck,	CK_343X),
-	CLK("omapfb",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
-	CLK("omapfb",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
-	CLK("omapfb",	"ick",		&dss_ick_3430es2,	CK_3430ES2),
-	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
-	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
-	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
-	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
-	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
-	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2),
-	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2),
-	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_343X),
-	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_343X),
-	CLK(NULL,	"gpio1_dbck",	&gpio1_dbck,	CK_343X),
-	CLK("omap_wdt",	"fck",		&wdt2_fck,	CK_343X),
-	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_343X),
-	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2),
-	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_343X),
-	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_343X),
-	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_343X),
-	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_343X),
-	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_343X),
-	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_343X),
-	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_343X),
-	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_343X),
-	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_343X),
-	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_343X),
-	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_343X),
-	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_343X),
-	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_343X),
-	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_343X),
-	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_343X),
-	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_343X),
-	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_343X),
-	CLK(NULL,	"per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X),
-	CLK(NULL,	"gpio6_dbck",	&gpio6_dbck,	CK_343X),
-	CLK(NULL,	"gpio5_dbck",	&gpio5_dbck,	CK_343X),
-	CLK(NULL,	"gpio4_dbck",	&gpio4_dbck,	CK_343X),
-	CLK(NULL,	"gpio3_dbck",	&gpio3_dbck,	CK_343X),
-	CLK(NULL,	"gpio2_dbck",	&gpio2_dbck,	CK_343X),
-	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_343X),
-	CLK(NULL,	"per_l4_ick",	&per_l4_ick,	CK_343X),
-	CLK(NULL,	"gpio6_ick",	&gpio6_ick,	CK_343X),
-	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_343X),
-	CLK(NULL,	"gpio4_ick",	&gpio4_ick,	CK_343X),
-	CLK(NULL,	"gpio3_ick",	&gpio3_ick,	CK_343X),
-	CLK(NULL,	"gpio2_ick",	&gpio2_ick,	CK_343X),
-	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_343X),
-	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_343X),
-	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_343X),
-	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_343X),
-	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_343X),
-	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_343X),
-	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_343X),
-	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_343X),
-	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_343X),
-	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_343X),
-	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_343X),
-	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_343X),
-	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_343X),
-	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_343X),
-	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_343X),
-	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_343X),
-	CLK(NULL,	"emu_src_ck",	&emu_src_ck,	CK_343X),
-	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_343X),
-	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_343X),
-	CLK(NULL,	"atclk_fck",	&atclk_fck,	CK_343X),
-	CLK(NULL,	"traceclk_src_fck", &traceclk_src_fck, CK_343X),
-	CLK(NULL,	"traceclk_fck",	&traceclk_fck,	CK_343X),
-	CLK(NULL,	"sr1_fck",	&sr1_fck,	CK_343X),
-	CLK(NULL,	"sr2_fck",	&sr2_fck,	CK_343X),
-	CLK(NULL,	"sr_l4_ick",	&sr_l4_ick,	CK_343X),
-	CLK(NULL,	"secure_32k_fck", &secure_32k_fck, CK_343X),
-	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_343X),
-	CLK(NULL,	"wdt1_fck",	&wdt1_fck,	CK_343X),
-};
-
-/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
-#define DPLL_AUTOIDLE_DISABLE			0x0
-#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
-
-#define MAX_DPLL_WAIT_TRIES		1000000
-
-#define MIN_SDRC_DLL_LOCK_FREQ		83000000
-
 #define CYCLES_PER_MHZ			1000000
 
-/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
-#define SDRC_MPURATE_SCALE		8
-
-/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
-#define SDRC_MPURATE_BASE_SHIFT		9
-
-/*
- * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
- * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
- */
-#define SDRC_MPURATE_LOOPS		96
-
 /*
  * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
  * that are sourced by DPLL5, and both of these require this clock
@@ -345,6 +52,9 @@ static struct omap_clk omap34xx_clks[] = {
  */
 #define DPLL5_FREQ_FOR_USBHOST		120000000
 
+/* needed by omap3_core_dpll_m2_set_rate() */
+struct clk *sdrc_ick_p, *arm_fck_p;
+
 /**
  * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
  * @clk: struct clk * being enabled
@@ -366,6 +76,13 @@ static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
 	*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
 }
 
+const struct clkops clkops_omap3430es2_ssi_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
 /**
  * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
  * @clk: struct clk * being enabled
@@ -391,6 +108,13 @@ static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
 	*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
 }
 
+const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
 /**
  * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
  * @clk: struct clk * being enabled
@@ -412,395 +136,19 @@ static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
 	*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
 }
 
-/**
- * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
- *
- * Recalculate and propagate the DPLL rate.
- */
-static unsigned long omap3_dpll_recalc(struct clk *clk)
-{
-	return omap2_get_dpll_rate(clk);
-}
-
-/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
-static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->control_reg);
-	v &= ~dd->enable_mask;
-	v |= clken_bits << __ffs(dd->enable_mask);
-	__raw_writel(v, dd->control_reg);
-}
-
-/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
-static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
-{
-	const struct dpll_data *dd;
-	int i = 0;
-	int ret = -EINVAL;
-
-	dd = clk->dpll_data;
-
-	state <<= __ffs(dd->idlest_mask);
-
-	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
-	       i < MAX_DPLL_WAIT_TRIES) {
-		i++;
-		udelay(1);
-	}
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
-		       clk->name, (state) ? "locked" : "bypassed");
-	} else {
-		pr_debug("clock: %s transition to '%s' in %d loops\n",
-			 clk->name, (state) ? "locked" : "bypassed", i);
-
-		ret = 0;
-	}
-
-	return ret;
-}
-
-/* From 3430 TRM ES2 4.7.6.2 */
-static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
-{
-	unsigned long fint;
-	u16 f = 0;
-
-	fint = clk->dpll_data->clk_ref->rate / n;
-
-	pr_debug("clock: fint is %lu\n", fint);
-
-	if (fint >= 750000 && fint <= 1000000)
-		f = 0x3;
-	else if (fint > 1000000 && fint <= 1250000)
-		f = 0x4;
-	else if (fint > 1250000 && fint <= 1500000)
-		f = 0x5;
-	else if (fint > 1500000 && fint <= 1750000)
-		f = 0x6;
-	else if (fint > 1750000 && fint <= 2100000)
-		f = 0x7;
-	else if (fint > 7500000 && fint <= 10000000)
-		f = 0xB;
-	else if (fint > 10000000 && fint <= 12500000)
-		f = 0xC;
-	else if (fint > 12500000 && fint <= 15000000)
-		f = 0xD;
-	else if (fint > 15000000 && fint <= 17500000)
-		f = 0xE;
-	else if (fint > 17500000 && fint <= 21000000)
-		f = 0xF;
-	else
-		pr_debug("clock: unknown freqsel setting for %d\n", n);
-
-	return f;
-}
-
-/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
-
-/*
- * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
- * readiness before returning.  Will save and restore the DPLL's
- * autoidle state across the enable, per the CDP code.  If the DPLL
- * locked successfully, return 0; if the DPLL did not lock in the time
- * allotted, or DPLL3 was passed in, return -EINVAL.
- */
-static int _omap3_noncore_dpll_lock(struct clk *clk)
-{
-	u8 ai;
-	int r;
-
-	if (clk == &dpll3_ck)
-		return -EINVAL;
-
-	pr_debug("clock: locking DPLL %s\n", clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	omap3_dpll_deny_idle(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
-
-	r = _omap3_wait_dpll_status(clk, 1);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-
-	return r;
-}
-
-/*
- * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
- * bypass mode, the DPLL's rate is set equal to its parent clock's
- * rate.  Waits for the DPLL to report readiness before returning.
- * Will save and restore the DPLL's autoidle state across the enable,
- * per the CDP code.  If the DPLL entered bypass mode successfully,
- * return 0; if the DPLL did not enter bypass in the time allotted, or
- * DPLL3 was passed in, or the DPLL does not support low-power bypass,
- * return -EINVAL.
- */
-static int _omap3_noncore_dpll_bypass(struct clk *clk)
-{
-	int r;
-	u8 ai;
-
-	if (clk == &dpll3_ck)
-		return -EINVAL;
-
-	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
-		return -EINVAL;
-
-	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
-		 clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
-
-	r = _omap3_wait_dpll_status(clk, 0);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
-
-	return r;
-}
-
-/*
- * _omap3_noncore_dpll_stop - instruct a DPLL to stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. Will save and
- * restore the DPLL's autoidle state across the stop, per the CDP
- * code.  If DPLL3 was passed in, or the DPLL does not support
- * low-power stop, return -EINVAL; otherwise, return 0.
- */
-static int _omap3_noncore_dpll_stop(struct clk *clk)
-{
-	u8 ai;
-
-	if (clk == &dpll3_ck)
-		return -EINVAL;
-
-	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
-		return -EINVAL;
-
-	pr_debug("clock: stopping DPLL %s\n", clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
-
-	return 0;
-}
-
-/**
- * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
- * The choice of modes depends on the DPLL's programmed rate: if it is
- * the same as the DPLL's parent clock, it will enter bypass;
- * otherwise, it will enter lock.  This code will wait for the DPLL to
- * indicate readiness before returning, unless the DPLL takes too long
- * to enter the target state.  Intended to be used as the struct clk's
- * enable function.  If DPLL3 was passed in, or the DPLL does not
- * support low-power stop, or if the DPLL took too long to enter
- * bypass or lock, return -EINVAL; otherwise, return 0.
- */
-static int omap3_noncore_dpll_enable(struct clk *clk)
-{
-	int r;
-	struct dpll_data *dd;
-
-	if (clk == &dpll3_ck)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	if (clk->rate == dd->clk_bypass->rate) {
-		WARN_ON(clk->parent != dd->clk_bypass);
-		r = _omap3_noncore_dpll_bypass(clk);
-	} else {
-		WARN_ON(clk->parent != dd->clk_ref);
-		r = _omap3_noncore_dpll_lock(clk);
-	}
-	/* FIXME: this is dubious - if clk->rate has changed, what about propagating? */
-	if (!r)
-		clk->rate = omap2_get_dpll_rate(clk);
-
-	return r;
-}
-
-/**
- * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
- * The choice of modes depends on the DPLL's programmed rate: if it is
- * the same as the DPLL's parent clock, it will enter bypass;
- * otherwise, it will enter lock.  This code will wait for the DPLL to
- * indicate readiness before returning, unless the DPLL takes too long
- * to enter the target state.  Intended to be used as the struct clk's
- * enable function.  If DPLL3 was passed in, or the DPLL does not
- * support low-power stop, or if the DPLL took too long to enter
- * bypass or lock, return -EINVAL; otherwise, return 0.
- */
-static void omap3_noncore_dpll_disable(struct clk *clk)
-{
-	if (clk == &dpll3_ck)
-		return;
-
-	_omap3_noncore_dpll_stop(clk);
-}
-
-
-/* Non-CORE DPLL rate set code */
-
-/*
- * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk: struct clk * of DPLL to set
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- * @freqsel: FREQSEL value to set
- *
- * Program the DPLL with the supplied M, N values, and wait for the DPLL to
- * lock..  Returns -EINVAL upon error, or 0 upon success.
- */
-static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
-{
-	struct dpll_data *dd = clk->dpll_data;
-	u32 v;
-
-	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
-	_omap3_noncore_dpll_bypass(clk);
-
-	/* Set jitter correction */
-	v = __raw_readl(dd->control_reg);
-	v &= ~dd->freqsel_mask;
-	v |= freqsel << __ffs(dd->freqsel_mask);
-	__raw_writel(v, dd->control_reg);
-
-	/* Set DPLL multiplier, divider */
-	v = __raw_readl(dd->mult_div1_reg);
-	v &= ~(dd->mult_mask | dd->div1_mask);
-	v |= m << __ffs(dd->mult_mask);
-	v |= (n - 1) << __ffs(dd->div1_mask);
-	__raw_writel(v, dd->mult_div1_reg);
-
-	/* We let the clock framework set the other output dividers later */
-
-	/* REVISIT: Set ramp-up delay? */
-
-	_omap3_noncore_dpll_lock(clk);
-
-	return 0;
-}
-
-/**
- * omap3_noncore_dpll_set_rate - set non-core DPLL rate
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
- * low-power bypass, and the target rate is the bypass source clock
- * rate, then configure the DPLL for bypass.  Otherwise, round the
- * target rate if it hasn't been done already, then program and lock
- * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
- */
-static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct clk *new_parent = NULL;
-	u16 freqsel;
-	struct dpll_data *dd;
-	int ret;
-
-	if (!clk || !rate)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	if (rate == omap2_get_dpll_rate(clk))
-		return 0;
-
-	/*
-	 * Ensure both the bypass and ref clocks are enabled prior to
-	 * doing anything; we need the bypass clock running to reprogram
-	 * the DPLL.
-	 */
-	omap2_clk_enable(dd->clk_bypass);
-	omap2_clk_enable(dd->clk_ref);
-
-	if (dd->clk_bypass->rate == rate &&
-	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
-		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
-
-		ret = _omap3_noncore_dpll_bypass(clk);
-		if (!ret)
-			new_parent = dd->clk_bypass;
-	} else {
-		if (dd->last_rounded_rate != rate)
-			omap2_dpll_round_rate(clk, rate);
-
-		if (dd->last_rounded_rate == 0)
-			return -EINVAL;
-
-		freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
-		if (!freqsel)
-			WARN_ON(1);
-
-		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
-			 clk->name, rate);
-
-		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
-						 dd->last_rounded_n, freqsel);
-		if (!ret)
-			new_parent = dd->clk_ref;
-	}
-	if (!ret) {
-		/*
-		 * Switch the parent clock in the heirarchy, and make sure
-		 * that the new parent's usecount is correct.  Note: we
-		 * enable the new parent before disabling the old to avoid
-		 * any unnecessary hardware disable->enable transitions.
-		 */
-		if (clk->usecount) {
-			omap2_clk_enable(new_parent);
-			omap2_clk_disable(clk->parent);
-		}
-		clk_reparent(clk, new_parent);
-		clk->rate = rate;
-	}
-	omap2_clk_disable(dd->clk_ref);
-	omap2_clk_disable(dd->clk_bypass);
+const struct clkops clkops_omap3430es2_hsotgusb_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
 
-	return 0;
-}
+const struct clkops clkops_noncore_dpll_ops = {
+	.enable		= omap3_noncore_dpll_enable,
+	.disable	= omap3_noncore_dpll_disable,
+};
 
-static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
 {
 	/*
 	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
@@ -831,12 +179,12 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
  * Program the DPLL M2 divider with the rounded target rate.  Returns
  * -EINVAL upon error, or 0 upon success.
  */
-static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
+int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 {
 	u32 new_div = 0;
 	u32 unlock_dll = 0;
 	u32 c;
-	unsigned long validrate, sdrcrate, mpurate;
+	unsigned long validrate, sdrcrate, _mpurate;
 	struct omap_sdrc_params *sdrc_cs0;
 	struct omap_sdrc_params *sdrc_cs1;
 	int ret;
@@ -844,14 +192,11 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	if (!clk || !rate)
 		return -EINVAL;
 
-	if (clk != &dpll3_m2_ck)
-		return -EINVAL;
-
 	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
 	if (validrate != rate)
 		return -EINVAL;
 
-	sdrcrate = sdrc_ick.rate;
+	sdrcrate = sdrc_ick_p->rate;
 	if (rate > clk->rate)
 		sdrcrate <<= ((rate / clk->rate) >> 1);
 	else
@@ -869,8 +214,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	/*
 	 * XXX This only needs to be done when the CPU frequency changes
 	 */
-	mpurate = arm_fck.rate / CYCLES_PER_MHZ;
-	c = (mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
+	_mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
+	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
 	c += 1;  /* for safety */
 	c *= SDRC_MPURATE_LOOPS;
 	c >>= SDRC_MPURATE_SCALE;
@@ -906,129 +251,6 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-
-static const struct clkops clkops_noncore_dpll_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-};
-
-/* DPLL autoidle read/set code */
-
-
-/**
- * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
- * @clk: struct clk * of the DPLL to read
- *
- * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
- * -EINVAL if passed a null pointer or if the struct clk does not
- * appear to refer to a DPLL.
- */
-static u32 omap3_dpll_autoidle_read(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->autoidle_reg);
-	v &= dd->autoidle_mask;
-	v >>= __ffs(dd->autoidle_mask);
-
-	return v;
-}
-
-/**
- * omap3_dpll_allow_idle - enable DPLL autoidle bits
- * @clk: struct clk * of the DPLL to operate on
- *
- * Enable DPLL automatic idle control.  This automatic idle mode
- * switching takes effect only when the DPLL is locked, at least on
- * OMAP3430.  The DPLL will enter low-power stop when its downstream
- * clocks are gated.  No return value.
- */
-static void omap3_dpll_allow_idle(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return;
-
-	dd = clk->dpll_data;
-
-	/*
-	 * REVISIT: CORE DPLL can optionally enter low-power bypass
-	 * by writing 0x5 instead of 0x1.  Add some mechanism to
-	 * optionally enter this mode.
-	 */
-	v = __raw_readl(dd->autoidle_reg);
-	v &= ~dd->autoidle_mask;
-	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
-}
-
-/**
- * omap3_dpll_deny_idle - prevent DPLL from automatically idling
- * @clk: struct clk * of the DPLL to operate on
- *
- * Disable DPLL automatic idle control.  No return value.
- */
-static void omap3_dpll_deny_idle(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->autoidle_reg);
-	v &= ~dd->autoidle_mask;
-	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
-}
-
-/* Clock control for DPLL outputs */
-
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state.  If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-static unsigned long omap3_clkoutx2_recalc(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	unsigned long rate;
-	u32 v;
-	struct clk *pclk;
-
-	/* Walk up the parents of clk, looking for a DPLL */
-	pclk = clk->parent;
-	while (pclk && !pclk->dpll_data)
-		pclk = pclk->parent;
-
-	/* clk does not have a DPLL as a parent? */
-	WARN_ON(!pclk);
-
-	dd = pclk->dpll_data;
-
-	WARN_ON(!dd->enable_mask);
-
-	v = __raw_readl(dd->control_reg) & dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-	if (v != OMAP3XXX_EN_DPLL_LOCKED)
-		rate = clk->parent->rate;
-	else
-		rate = clk->parent->rate * 2;
-	return rate;
-}
-
 /* Common clock code */
 
 /*
@@ -1037,7 +259,7 @@ static unsigned long omap3_clkoutx2_recalc(struct clk *clk)
  */
 #if defined(CONFIG_ARCH_OMAP3)
 
-static struct clk_functions omap2_clk_functions = {
+struct clk_functions omap2_clk_functions = {
 	.clk_enable		= omap2_clk_enable,
 	.clk_disable		= omap2_clk_disable,
 	.clk_round_rate		= omap2_clk_round_rate,
@@ -1063,7 +285,7 @@ void omap2_clk_prepare_for_reboot(void)
 #endif
 }
 
-static void omap3_clk_lock_dpll5(void)
+void omap3_clk_lock_dpll5(void)
 {
 	struct clk *dpll5_clk;
 	struct clk *dpll5_m2_clk;
@@ -1093,19 +315,32 @@ static void omap3_clk_lock_dpll5(void)
  */
 static int __init omap2_clk_arch_init(void)
 {
+	struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck;
+	unsigned long osc_sys_rate;
+
 	if (!mpurate)
 		return -EINVAL;
 
+	/* XXX test these for success */
+	dpll1_ck = clk_get(NULL, "dpll1_ck");
+	arm_fck = clk_get(NULL, "arm_fck");
+	core_ck = clk_get(NULL, "core_ck");
+	osc_sys_ck = clk_get(NULL, "osc_sys_ck");
+
 	/* REVISIT: not yet ready for 343x */
-	if (clk_set_rate(&dpll1_ck, mpurate))
+	if (clk_set_rate(dpll1_ck, mpurate))
 		printk(KERN_ERR "*** Unable to set MPU rate\n");
 
 	recalculate_root_clocks();
 
-	printk(KERN_INFO "Switched to new clocking rate (Crystal/Core/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (osc_sys_ck.rate / 1000000), ((osc_sys_ck.rate / 100000) % 10),
-	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000)) ;
+	osc_sys_rate = clk_get_rate(osc_sys_ck);
+
+	pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
+		"%ld.%01ld/%ld/%ld MHz\n",
+		(osc_sys_rate / 1000000),
+		((osc_sys_rate / 100000) % 10),
+		(clk_get_rate(core_ck) / 1000000),
+		(clk_get_rate(arm_fck) / 1000000));
 
 	calibrate_delay();
 
@@ -1113,83 +348,7 @@ static int __init omap2_clk_arch_init(void)
 }
 arch_initcall(omap2_clk_arch_init);
 
-int __init omap2_clk_init(void)
-{
-	/* struct prcm_config *prcm; */
-	struct omap_clk *c;
-	/* u32 clkrate; */
-	u32 cpu_clkflg;
-
-	if (cpu_is_omap34xx()) {
-		cpu_mask = RATE_IN_343X;
-		cpu_clkflg = CK_343X;
-
-		/*
-		 * Update this if there are further clock changes between ES2
-		 * and production parts
-		 */
-		if (omap_rev() == OMAP3430_REV_ES1_0) {
-			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
-			cpu_clkflg |= CK_3430ES1;
-		} else {
-			cpu_mask |= RATE_IN_3430ES2;
-			cpu_clkflg |= CK_3430ES2;
-		}
-	}
-
-	clk_init(&omap2_clk_functions);
-
-	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
-		clk_preinit(c->lk.clk);
-
-	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
-		if (c->cpu & cpu_clkflg) {
-			clkdev_add(&c->lk);
-			clk_register(c->lk.clk);
-			omap2_init_clk_clkdm(c->lk.clk);
-		}
 
-	/* REVISIT: Not yet ready for OMAP3 */
-#if 0
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			 break;
-	}
-	curr_prcm_set = prcm;
 #endif
 
-	recalculate_root_clocks();
 
-	printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
-	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable_init_clocks();
-
-	/*
-	 * Lock DPLL5 and put it in autoidle.
-	 */
-	if (omap_rev() >= OMAP3430_REV_ES2_0)
-		omap3_clk_lock_dpll5();
-
-	/* Avoid sleeping during omap2_clk_prepare_for_reboot() */
-	/* REVISIT: not yet ready for 343x */
-#if 0
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-#endif
-	return 0;
-}
-
-#endif
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 9565c05bebd2..9a2c07eac9ad 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1,2993 +1,24 @@
 /*
- * OMAP3 clock framework
+ * OMAP3 clock function prototypes and macros
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Written by Paul Walmsley
- * With many device clock fixes by Kevin Hilman and Jouni Högander
- * DPLL bypass clock support added by Roman Tereshonkov
- *
- */
-
-/*
- * Virtual clocks are introduced as convenient tools.
- * They are sources for other clocks and not supposed
- * to be requested from drivers directly.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-
-#include <mach/control.h>
-
-#include "clock.h"
-#include "cm.h"
-#include "cm-regbits-34xx.h"
-#include "prm.h"
-#include "prm-regbits-34xx.h"
-
-#define OMAP_CM_REGADDR		OMAP34XX_CM_REGADDR
-
-static unsigned long omap3_dpll_recalc(struct clk *clk);
-static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
-static void omap3_dpll_allow_idle(struct clk *clk);
-static void omap3_dpll_deny_idle(struct clk *clk);
-static u32 omap3_dpll_autoidle_read(struct clk *clk);
-static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
-static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
-static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
-
-/* Maximum DPLL multiplier, divider values for OMAP3 */
-#define OMAP3_MAX_DPLL_MULT		2048
-#define OMAP3_MAX_DPLL_DIV		128
-
-/*
- * DPLL1 supplies clock to the MPU.
- * DPLL2 supplies clock to the IVA2.
- * DPLL3 supplies CORE domain clocks.
- * DPLL4 supplies peripheral clocks.
- * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
- */
-
-/* Forward declarations for DPLL bypass clocks */
-static struct clk dpll1_fck;
-static struct clk dpll2_fck;
-
-/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
-#define DPLL_LOW_POWER_STOP		0x1
-#define DPLL_LOW_POWER_BYPASS		0x5
-#define DPLL_LOCKED			0x7
-
-/* PRM CLOCKS */
-
-/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
-static struct clk omap_32k_fck = {
-	.name		= "omap_32k_fck",
-	.ops		= &clkops_null,
-	.rate		= 32768,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk secure_32k_fck = {
-	.name		= "secure_32k_fck",
-	.ops		= &clkops_null,
-	.rate		= 32768,
-	.flags		= RATE_FIXED,
-};
-
-/* Virtual source clocks for osc_sys_ck */
-static struct clk virt_12m_ck = {
-	.name		= "virt_12m_ck",
-	.ops		= &clkops_null,
-	.rate		= 12000000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_13m_ck = {
-	.name		= "virt_13m_ck",
-	.ops		= &clkops_null,
-	.rate		= 13000000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_16_8m_ck = {
-	.name		= "virt_16_8m_ck",
-	.ops		= &clkops_null,
-	.rate		= 16800000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_19_2m_ck = {
-	.name		= "virt_19_2m_ck",
-	.ops		= &clkops_null,
-	.rate		= 19200000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_26m_ck = {
-	.name		= "virt_26m_ck",
-	.ops		= &clkops_null,
-	.rate		= 26000000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_38_4m_ck = {
-	.name		= "virt_38_4m_ck",
-	.ops		= &clkops_null,
-	.rate		= 38400000,
-	.flags		= RATE_FIXED,
-};
-
-static const struct clksel_rate osc_sys_12m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_13m_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_16_8m_rates[] = {
-	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_19_2m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_26m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_38_4m_rates[] = {
-	{ .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel osc_sys_clksel[] = {
-	{ .parent = &virt_12m_ck,   .rates = osc_sys_12m_rates },
-	{ .parent = &virt_13m_ck,   .rates = osc_sys_13m_rates },
-	{ .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates },
-	{ .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates },
-	{ .parent = &virt_26m_ck,   .rates = osc_sys_26m_rates },
-	{ .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates },
-	{ .parent = NULL },
-};
-
-/* Oscillator clock */
-/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
-static struct clk osc_sys_ck = {
-	.name		= "osc_sys_ck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP3430_PRM_CLKSEL,
-	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
-	.clksel		= osc_sys_clksel,
-	/* REVISIT: deal with autoextclkmode? */
-	.flags		= RATE_FIXED,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate div2_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 0 }
-};
-
-static const struct clksel sys_clksel[] = {
-	{ .parent = &osc_sys_ck, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */
-/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
-static struct clk sys_ck = {
-	.name		= "sys_ck",
-	.ops		= &clkops_null,
-	.parent		= &osc_sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
-	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
-	.clksel		= sys_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk sys_altclk = {
-	.name		= "sys_altclk",
-	.ops		= &clkops_null,
-};
-
-/* Optional external clock input for some McBSPs */
-static struct clk mcbsp_clks = {
-	.name		= "mcbsp_clks",
-	.ops		= &clkops_null,
-};
-
-/* PRM EXTERNAL CLOCK OUTPUT */
-
-static struct clk sys_clkout1 = {
-	.name		= "sys_clkout1",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &osc_sys_ck,
-	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
-	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLLS */
-
-/* CM CLOCKS */
-
-static const struct clksel_rate div16_dpll_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 5, .val = 5, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 7, .val = 7, .flags = RATE_IN_343X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
-	{ .div = 9, .val = 9, .flags = RATE_IN_343X },
-	{ .div = 10, .val = 10, .flags = RATE_IN_343X },
-	{ .div = 11, .val = 11, .flags = RATE_IN_343X },
-	{ .div = 12, .val = 12, .flags = RATE_IN_343X },
-	{ .div = 13, .val = 13, .flags = RATE_IN_343X },
-	{ .div = 14, .val = 14, .flags = RATE_IN_343X },
-	{ .div = 15, .val = 15, .flags = RATE_IN_343X },
-	{ .div = 16, .val = 16, .flags = RATE_IN_343X },
-	{ .div = 0 }
-};
-
-/* DPLL1 */
-/* MPU clock source */
-/* Type: DPLL */
-static struct dpll_data dpll1_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
-	.clk_bypass	= &dpll1_fck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_MPU_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
-	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.auto_recal_bit	= OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_MPU_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
-	.autoidle_mask	= OMAP3430_AUTO_MPU_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
-	.idlest_mask	= OMAP3430_ST_MPU_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll1_ck = {
-	.name		= "dpll1_ck",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll1_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.clkdm_name	= "dpll1_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-/*
- * This virtual clock provides the CLKOUTX2 output from the DPLL if the
- * DPLL isn't bypassed.
- */
-static struct clk dpll1_x2_ck = {
-	.name		= "dpll1_x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll1_ck,
-	.clkdm_name	= "dpll1_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */
-static const struct clksel div16_dpll1_x2m2_clksel[] = {
-	{ .parent = &dpll1_x2_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/*
- * Does not exist in the TRM - needed to separate the M2 divider from
- * bypass selection in mpu_ck
- */
-static struct clk dpll1_x2m2_ck = {
-	.name		= "dpll1_x2m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll1_x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
-	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
-	.clksel		= div16_dpll1_x2m2_clksel,
-	.clkdm_name	= "dpll1_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* DPLL2 */
-/* IVA2 clock source */
-/* Type: DPLL */
-
-static struct dpll_data dpll2_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
-	.clk_bypass	= &dpll2_fck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_IVA2_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
-	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
-				(1 << DPLL_LOW_POWER_BYPASS),
-	.auto_recal_bit	= OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
-	.autoidle_mask	= OMAP3430_AUTO_IVA2_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
-	.idlest_mask	= OMAP3430_ST_IVA2_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll2_ck = {
-	.name		= "dpll2_ck",
-	.ops		= &clkops_noncore_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll2_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.clkdm_name	= "dpll2_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-static const struct clksel div16_dpll2_m2x2_clksel[] = {
-	{ .parent = &dpll2_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/*
- * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT
- * or CLKOUTX2. CLKOUT seems most plausible.
- */
-static struct clk dpll2_m2_ck = {
-	.name		= "dpll2_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
-					  OMAP3430_CM_CLKSEL2_PLL),
-	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
-	.clksel		= div16_dpll2_m2x2_clksel,
-	.clkdm_name	= "dpll2_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * DPLL3
- * Source clock for all interfaces and for some device fclks
- * REVISIT: Also supports fast relock bypass - not included below
- */
-static struct dpll_data dpll3_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
-	.clk_bypass	= &sys_ck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_CORE_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
-	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
-	.autoidle_mask	= OMAP3430_AUTO_CORE_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.idlest_mask	= OMAP3430_ST_CORE_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll3_ck = {
-	.name		= "dpll3_ck",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll3_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-/*
- * This virtual clock provides the CLKOUTX2 output from the DPLL if the
- * DPLL isn't bypassed
- */
-static struct clk dpll3_x2_ck = {
-	.name		= "dpll3_x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_ck,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel_rate div31_dpll3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2 },
-	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2 },
-	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2 },
-	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2 },
-	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2 },
-	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2 },
-	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2 },
-	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2 },
-	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2 },
-	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2 },
-	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2 },
-	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2 },
-	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2 },
-	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2 },
-	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2 },
-	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2 },
-	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2 },
-	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2 },
-	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2 },
-	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2 },
-	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2 },
-	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2 },
-	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2 },
-	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2 },
-	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2 },
-	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2 },
-	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2 },
-	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2 },
-	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2 },
-	{ .div = 0 },
-};
-
-static const struct clksel div31_dpll3m2_clksel[] = {
-	{ .parent = &dpll3_ck, .rates = div31_dpll3_rates },
-	{ .parent = NULL }
-};
-
-/* DPLL3 output M2 - primary control point for CORE speed */
-static struct clk dpll3_m2_ck = {
-	.name		= "dpll3_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
-	.clksel		= div31_dpll3m2_clksel,
-	.clkdm_name	= "dpll3_clkdm",
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap3_core_dpll_m2_set_rate,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk core_ck = {
-	.name		= "core_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dpll3_m2x2_ck = {
-	.name		= "dpll3_m2x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m2_ck,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static const struct clksel div16_dpll3_clksel[] = {
-	{ .parent = &dpll3_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/* This virtual clock is the source for dpll3_m3x2_ck */
-static struct clk dpll3_m3_ck = {
-	.name		= "dpll3_m3_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
-	.clksel		= div16_dpll3_clksel,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll3_m3x2_ck = {
-	.name		= "dpll3_m3x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll3_m3_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static struct clk emu_core_alwon_ck = {
-	.name		= "emu_core_alwon_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m3x2_ck,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL4 */
-/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
-/* Type: DPLL */
-static struct dpll_data dpll4_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
-	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
-	.clk_bypass	= &sys_ck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
-	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
-	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.idlest_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll4_ck = {
-	.name		= "dpll4_ck",
-	.ops		= &clkops_noncore_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll4_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_dpll4_set_rate,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-/*
- * This virtual clock provides the CLKOUTX2 output from the DPLL if the
- * DPLL isn't bypassed --
- * XXX does this serve any downstream clocks?
- */
-static struct clk dpll4_x2_ck = {
-	.name		= "dpll4_x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel div16_dpll4_clksel[] = {
-	{ .parent = &dpll4_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/* This virtual clock is the source for dpll4_m2x2_ck */
-static struct clk dpll4_m2_ck = {
-	.name		= "dpll4_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
-	.clksel_mask	= OMAP3430_DIV_96M_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m2x2_ck = {
-	.name		= "dpll4_m2x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/*
- * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
- * PRM_96M_ALWON_(F)CLK.  Two clocks then emerge from the PRM:
- * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and
- * CM_96K_(F)CLK.
- */
-static struct clk omap_96m_alwon_fck = {
-	.name		= "omap_96m_alwon_fck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_m2x2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk cm_96m_fck = {
-	.name		= "cm_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_96m_alwon_fck,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel_rate omap_96m_dpll_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate omap_96m_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel omap_96m_fck_clksel[] = {
-	{ .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates },
-	{ .parent = &sys_ck,	 .rates = omap_96m_sys_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_96m_fck = {
-	.name		= "omap_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_96M_MASK,
-	.clksel		= omap_96m_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* This virtual clock is the source for dpll4_m3x2_ck */
-static struct clk dpll4_m3_ck = {
-	.name		= "dpll4_m3_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m3x2_ck = {
-	.name		= "dpll4_m3x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate omap_54m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel omap_54m_clksel[] = {
-	{ .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates },
-	{ .parent = &sys_altclk,    .rates = omap_54m_alt_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_54m_fck = {
-	.name		= "omap_54m_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_54M_MASK,
-	.clksel		= omap_54m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate omap_48m_cm96m_rates[] = {
-	{ .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate omap_48m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel omap_48m_clksel[] = {
-	{ .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates },
-	{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_48m_fck = {
-	.name		= "omap_48m_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_48M_MASK,
-	.clksel		= omap_48m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk omap_12m_fck = {
-	.name		= "omap_12m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_48m_fck,
-	.fixed_div	= 4,
-	.recalc		= &omap2_fixed_divisor_recalc,
-};
-
-/* This virstual clock is the source for dpll4_m4x2_ck */
-static struct clk dpll4_m4_ck = {
-	.name		= "dpll4_m4_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-	.set_rate	= &omap2_clksel_set_rate,
-	.round_rate	= &omap2_clksel_round_rate,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m4x2_ck = {
-	.name		= "dpll4_m4x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m4_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* This virtual clock is the source for dpll4_m5x2_ck */
-static struct clk dpll4_m5_ck = {
-	.name		= "dpll4_m5_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m5x2_ck = {
-	.name		= "dpll4_m5x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m5_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* This virtual clock is the source for dpll4_m6x2_ck */
-static struct clk dpll4_m6_ck = {
-	.name		= "dpll4_m6_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m6x2_ck = {
-	.name		= "dpll4_m6x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m6_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static struct clk emu_per_alwon_ck = {
-	.name		= "emu_per_alwon_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_m6x2_ck,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL5 */
-/* Supplies 120MHz clock, USIM source clock */
-/* Type: DPLL */
-/* 3430ES2 only */
-static struct dpll_data dpll5_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
-	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
-	.clk_bypass	= &sys_ck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
-	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
-	.auto_recal_bit	= OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
-	.autoidle_mask	= OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
-	.idlest_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll5_ck = {
-	.name		= "dpll5_ck",
-	.ops		= &clkops_noncore_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll5_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.clkdm_name	= "dpll5_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-static const struct clksel div16_dpll5_clksel[] = {
-	{ .parent = &dpll5_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-static struct clk dpll5_m2_ck = {
-	.name		= "dpll5_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll5_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
-	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
-	.clksel		= div16_dpll5_clksel,
-	.clkdm_name	= "dpll5_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* CM EXTERNAL CLOCK OUTPUTS */
-
-static const struct clksel_rate clkout2_src_core_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate clkout2_src_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate clkout2_src_96m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate clkout2_src_54m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel clkout2_src_clksel[] = {
-	{ .parent = &core_ck,		.rates = clkout2_src_core_rates },
-	{ .parent = &sys_ck,		.rates = clkout2_src_sys_rates },
-	{ .parent = &cm_96m_fck,	.rates = clkout2_src_96m_rates },
-	{ .parent = &omap_54m_fck,	.rates = clkout2_src_54m_rates },
-	{ .parent = NULL }
-};
-
-static struct clk clkout2_src_ck = {
-	.name		= "clkout2_src_ck",
-	.ops		= &clkops_omap2_dflt,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP3430_CM_CLKOUT_CTRL,
-	.enable_bit	= OMAP3430_CLKOUT2_EN_SHIFT,
-	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
-	.clksel		= clkout2_src_clksel,
-	.clkdm_name	= "core_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate sys_clkout2_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 8, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 16, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel sys_clkout2_clksel[] = {
-	{ .parent = &clkout2_src_ck, .rates = sys_clkout2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk sys_clkout2 = {
-	.name		= "sys_clkout2",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
-	.clksel		= sys_clkout2_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* CM OUTPUT CLOCKS */
-
-static struct clk corex2_fck = {
-	.name		= "corex2_fck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m2x2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL power domain clock controls */
-
-static const struct clksel_rate div4_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 0 }
-};
-
-static const struct clksel div4_core_clksel[] = {
-	{ .parent = &core_ck, .rates = div4_rates },
-	{ .parent = NULL }
-};
-
-/*
- * REVISIT: Are these in DPLL power domain or CM power domain? docs
- * may be inconsistent here?
- */
-static struct clk dpll1_fck = {
-	.name		= "dpll1_fck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
-	.clksel		= div4_core_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mpu_ck = {
-	.name		= "mpu_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll1_x2m2_ck,
-	.clkdm_name	= "mpu_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
-static const struct clksel_rate arm_fck_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel arm_fck_clksel[] = {
-	{ .parent = &mpu_ck, .rates = arm_fck_rates },
-	{ .parent = NULL }
-};
-
-static struct clk arm_fck = {
-	.name		= "arm_fck",
-	.ops		= &clkops_null,
-	.parent		= &mpu_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
-	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
-	.clksel		= arm_fck_clksel,
-	.clkdm_name	= "mpu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* XXX What about neon_clkdm ? */
-
-/*
- * REVISIT: This clock is never specifically defined in the 3430 TRM,
- * although it is referenced - so this is a guess
- */
-static struct clk emu_mpu_alwon_ck = {
-	.name		= "emu_mpu_alwon_ck",
-	.ops		= &clkops_null,
-	.parent		= &mpu_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dpll2_fck = {
-	.name		= "dpll2_fck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
-	.clksel		= div4_core_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk iva2_ck = {
-	.name		= "iva2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll2_m2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
-	.clkdm_name	= "iva2_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* Common interface clocks */
-
-static const struct clksel div2_core_clksel[] = {
-	{ .parent = &core_ck, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk l3_ick = {
-	.name		= "l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
-	.clksel		= div2_core_clksel,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel div2_l3_clksel[] = {
-	{ .parent = &l3_ick, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk l4_ick = {
-	.name		= "l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l3_ick,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
-	.clksel		= div2_l3_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-
-};
-
-static const struct clksel div2_l4_clksel[] = {
-	{ .parent = &l4_ick, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk rm_ick = {
-	.name		= "rm_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_RM_MASK,
-	.clksel		= div2_l4_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* GFX power domain */
-
-/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */
-
-static const struct clksel gfx_l3_clksel[] = {
-	{ .parent = &l3_ick, .rates = gfx_l3_rates },
-	{ .parent = NULL }
-};
-
-/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */
-static struct clk gfx_l3_ck = {
-	.name		= "gfx_l3_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP_EN_GFX_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gfx_l3_fck = {
-	.name		= "gfx_l3_fck",
-	.ops		= &clkops_null,
-	.parent		= &gfx_l3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
-	.clksel		= gfx_l3_clksel,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gfx_l3_ick = {
-	.name		= "gfx_l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &gfx_l3_ck,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gfx_cg1_ck = {
-	.name		= "gfx_cg1_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gfx_cg2_ck = {
-	.name		= "gfx_cg2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* SGX power domain - 3430ES2 only */
-
-static const struct clksel_rate sgx_core_rates[] = {
-	{ .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 4, .val = 1, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate sgx_96m_rates[] = {
-	{ .div = 1,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel sgx_clksel[] = {
-	{ .parent = &core_ck,	 .rates = sgx_core_rates },
-	{ .parent = &cm_96m_fck, .rates = sgx_96m_rates },
-	{ .parent = NULL },
-};
-
-static struct clk sgx_fck = {
-	.name		= "sgx_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
-	.clksel		= sgx_clksel,
-	.clkdm_name	= "sgx_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk sgx_ick = {
-	.name		= "sgx_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
-	.clkdm_name	= "sgx_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE power domain */
-
-static struct clk d2d_26m_fck = {
-	.name		= "d2d_26m_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk modem_fck = {
-	.name		= "modem_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sad2d_ick = {
-	.name		= "sad2d_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SAD2D_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mad2d_ick = {
-	.name		= "mad2d_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP3430_EN_MAD2D_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel omap343x_gpt_clksel[] = {
-	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
-	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
-	{ .parent = NULL}
-};
-
-static struct clk gpt10_fck = {
-	.name		= "gpt10_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT10_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt11_fck = {
-	.name		= "gpt11_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT11_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk cpefuse_fck = {
-	.name		= "cpefuse_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ts_fck = {
-	.name		= "ts_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_32k_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbtll_fck = {
-	.name		= "usbtll_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll5_m2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE 96M FCLK-derived clocks */
-
-static struct clk core_96m_fck = {
-	.name		= "core_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_96m_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs3_fck = {
-	.name		= "mmchs_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs2_fck = {
-	.name		= "mmchs_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_fck = {
-	.name		= "mspro_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs1_fck = {
-	.name		= "mmchs_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c3_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c2_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c1_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck;
- * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck.
- */
-static const struct clksel_rate common_mcbsp_96m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel mcbsp_15_clksel[] = {
-	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
-	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mcbsp5_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 5,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
-	.clksel		= mcbsp_15_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp1_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
-	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
-	.clksel		= mcbsp_15_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* CORE_48M_FCK-derived clocks */
-
-static struct clk core_48m_fck = {
-	.name		= "core_48m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_48m_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi4_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi3_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi1_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_fck = {
-	.name		= "uart2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_fck = {
-	.name		= "uart1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fshostusb_fck = {
-	.name		= "fshostusb_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE_12M_FCK based clocks */
-
-static struct clk core_12m_fck = {
-	.name		= "core_12m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_12m_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_fck = {
-	.name		= "hdq_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_12m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL3-derived clock */
-
-static const struct clksel_rate ssi_ssr_corex2_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
-	{ .div = 0 }
-};
-
-static const struct clksel ssi_ssr_clksel[] = {
-	{ .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk ssi_ssr_fck_3430es1 = {
-	.name		= "ssi_ssr_fck",
-	.ops		= &clkops_omap2_dflt,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
-	.clksel		= ssi_ssr_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk ssi_ssr_fck_3430es2 = {
-	.name		= "ssi_ssr_fck",
-	.ops		= &clkops_omap3430es2_ssi_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
-	.clksel		= ssi_ssr_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk ssi_sst_fck_3430es1 = {
-	.name		= "ssi_sst_fck",
-	.ops		= &clkops_null,
-	.parent		= &ssi_ssr_fck_3430es1,
-	.fixed_div	= 2,
-	.recalc		= &omap2_fixed_divisor_recalc,
-};
-
-static struct clk ssi_sst_fck_3430es2 = {
-	.name		= "ssi_sst_fck",
-	.ops		= &clkops_null,
-	.parent		= &ssi_ssr_fck_3430es2,
-	.fixed_div	= 2,
-	.recalc		= &omap2_fixed_divisor_recalc,
-};
-
-
-
-/* CORE_L3_ICK based clocks */
-
-/*
- * XXX must add clk_enable/clk_disable for these if standard code won't
- * handle it
- */
-static struct clk core_l3_ick = {
-	.name		= "core_l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &l3_ick,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hsotgusb_ick_3430es1 = {
-	.name		= "hsotgusb_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &core_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hsotgusb_ick_3430es2 = {
-	.name		= "hsotgusb_ick",
-	.ops		= &clkops_omap3430es2_hsotgusb_wait,
-	.parent		= &core_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sdrc_ick = {
-	.name		= "sdrc_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpmc_fck = {
-	.name		= "gpmc_fck",
-	.ops		= &clkops_null,
-	.parent		= &core_l3_ick,
-	.flags		= ENABLE_ON_INIT, /* huh? */
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* SECURITY_L3_ICK based clocks */
-
-static struct clk security_l3_ick = {
-	.name		= "security_l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &l3_ick,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk pka_ick = {
-	.name		= "pka_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_PKA_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE_L4_ICK based clocks */
-
-static struct clk core_l4_ick = {
-	.name		= "core_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbtll_ick = {
-	.name		= "usbtll_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs3_ick = {
-	.name		= "mmchs_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* Intersystem Communication Registers - chassis mode only */
-static struct clk icr_ick = {
-	.name		= "icr_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk aes2_ick = {
-	.name		= "aes2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sha12_ick = {
-	.name		= "sha12_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk des2_ick = {
-	.name		= "des2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs2_ick = {
-	.name		= "mmchs_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs1_ick = {
-	.name		= "mmchs_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_ick = {
-	.name		= "mspro_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_ick = {
-	.name		= "hdq_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi4_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi3_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi1_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c3_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c2_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c1_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_ick = {
-	.name		= "uart2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_ick = {
-	.name		= "uart1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt11_ick = {
-	.name		= "gpt11_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt10_ick = {
-	.name		= "gpt10_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp5_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 5,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp1_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fac_ick = {
-	.name		= "fac_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mailboxes_ick = {
-	.name		= "mailboxes_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk omapctrl_ick = {
-	.name		= "omapctrl_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
-	.flags		= ENABLE_ON_INIT,
-	.recalc		= &followparent_recalc,
-};
-
-/* SSI_L4_ICK based clocks */
-
-static struct clk ssi_l4_ick = {
-	.name		= "ssi_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ssi_ick_3430es1 = {
-	.name		= "ssi_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &ssi_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ssi_ick_3430es2 = {
-	.name		= "ssi_ick",
-	.ops		= &clkops_omap3430es2_ssi_wait,
-	.parent		= &ssi_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* REVISIT: Technically the TRM claims that this is CORE_CLK based,
- * but l4_ick makes more sense to me */
-
-static const struct clksel usb_l4_clksel[] = {
-	{ .parent = &l4_ick, .rates = div2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk usb_l4_ick = {
-	.name		= "usb_l4_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ick,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
-	.clksel		= usb_l4_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* SECURITY_L4_ICK2 based clocks */
-
-static struct clk security_l4_ick2 = {
-	.name		= "security_l4_ick2",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk aes1_ick = {
-	.name		= "aes1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_AES1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rng_ick = {
-	.name		= "rng_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_RNG_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sha11_ick = {
-	.name		= "sha11_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_SHA11_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk des1_ick = {
-	.name		= "des1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_DES1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* DSS */
-static struct clk dss1_alwon_fck_3430es1 = {
-	.name		= "dss1_alwon_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll4_m4x2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss1_alwon_fck_3430es2 = {
-	.name		= "dss1_alwon_fck",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &dpll4_m4x2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_tv_fck = {
-	.name		= "dss_tv_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_54m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_TV_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_96m_fck = {
-	.name		= "dss_96m_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_TV_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss2_alwon_fck = {
-	.name		= "dss2_alwon_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_ick_3430es1 = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "dss_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_ick_3430es2 = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "dss_ick",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* CAM */
-
-static struct clk cam_mclk = {
-	.name		= "cam_mclk",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll4_m5x2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
-	.clkdm_name	= "cam_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk cam_ick = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "cam_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
-	.clkdm_name	= "cam_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk csi2_96m_fck = {
-	.name		= "csi2_96m_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_CSI2_SHIFT,
-	.clkdm_name	= "cam_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* USBHOST - 3430ES2 only */
-
-static struct clk usbhost_120m_fck = {
-	.name		= "usbhost_120m_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll5_m2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbhost_48m_fck = {
-	.name		= "usbhost_48m_fck",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &omap_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbhost_ick = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "usbhost_ick",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* WKUP */
-
-static const struct clksel_rate usim_96m_rates[] = {
-	{ .div = 2,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 4,  .val = 4, .flags = RATE_IN_343X },
-	{ .div = 8,  .val = 5, .flags = RATE_IN_343X },
-	{ .div = 10, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate usim_120m_rates[] = {
-	{ .div = 4,  .val = 7,	.flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 8,  .val = 8,	.flags = RATE_IN_343X },
-	{ .div = 16, .val = 9,	.flags = RATE_IN_343X },
-	{ .div = 20, .val = 10, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel usim_clksel[] = {
-	{ .parent = &omap_96m_fck,	.rates = usim_96m_rates },
-	{ .parent = &dpll5_m2_ck,	.rates = usim_120m_rates },
-	{ .parent = &sys_ck,		.rates = div2_rates },
-	{ .parent = NULL },
-};
-
-/* 3430ES2 only */
-static struct clk usim_fck = {
-	.name		= "usim_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430ES2_CLKSEL_USIMOCP_MASK,
-	.clksel		= usim_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */
-static struct clk gpt1_fck = {
-	.name		= "gpt1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT1_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk wkup_32k_fck = {
-	.name		= "wkup_32k_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_32k_fck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio1_dbck = {
-	.name		= "gpio1_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &wkup_32k_fck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt2_fck = {
-	.name		= "wdt2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_32k_fck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wkup_l4_ick = {
-	.name		= "wkup_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* 3430ES2 only */
-/* Never specifically named in the TRM, so we have to infer a likely name */
-static struct clk usim_ick = {
-	.name		= "usim_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt2_ick = {
-	.name		= "wdt2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt1_ick = {
-	.name		= "wdt1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio1_ick = {
-	.name		= "gpio1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk omap_32ksync_ick = {
-	.name		= "omap_32ksync_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* XXX This clock no longer exists in 3430 TRM rev F */
-static struct clk gpt12_ick = {
-	.name		= "gpt12_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt1_ick = {
-	.name		= "gpt1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-
-
-/* PER clock domain */
-
-static struct clk per_96m_fck = {
-	.name		= "per_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_96m_alwon_fck,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk per_48m_fck = {
-	.name		= "per_48m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_48m_fck,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_fck = {
-	.name		= "uart3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt2_fck = {
-	.name		= "gpt2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT2_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt3_fck = {
-	.name		= "gpt3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT3_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt4_fck = {
-	.name		= "gpt4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT4_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt5_fck = {
-	.name		= "gpt5_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT5_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt6_fck = {
-	.name		= "gpt6_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT6_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt7_fck = {
-	.name		= "gpt7_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT7_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt8_fck = {
-	.name		= "gpt8_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT8_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt9_fck = {
-	.name		= "gpt9_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT9_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk per_32k_alwon_fck = {
-	.name		= "per_32k_alwon_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_32k_fck,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio6_dbck = {
-	.name		= "gpio6_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_dbck = {
-	.name		= "gpio5_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio4_dbck = {
-	.name		= "gpio4_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio3_dbck = {
-	.name		= "gpio3_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio2_dbck = {
-	.name		= "gpio2_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt3_fck = {
-	.name		= "wdt3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk per_l4_ick = {
-	.name		= "per_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio6_ick = {
-	.name		= "gpio6_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_ick = {
-	.name		= "gpio5_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio4_ick = {
-	.name		= "gpio4_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio3_ick = {
-	.name		= "gpio3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio2_ick = {
-	.name		= "gpio2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt3_ick = {
-	.name		= "wdt3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_ick = {
-	.name		= "uart3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt9_ick = {
-	.name		= "gpt9_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt8_ick = {
-	.name		= "gpt8_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt7_ick = {
-	.name		= "gpt7_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt6_ick = {
-	.name		= "gpt6_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt5_ick = {
-	.name		= "gpt5_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt4_ick = {
-	.name		= "gpt4_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt3_ick = {
-	.name		= "gpt3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt2_ick = {
-	.name		= "gpt2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp2_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp3_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp4_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel mcbsp_234_clksel[] = {
-	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
-	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mcbsp2_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
-	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
-	.clksel		= mcbsp_234_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp3_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
-	.clksel		= mcbsp_234_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp4_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
-	.clksel		= mcbsp_234_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* EMU clocks */
-
-/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */
-
-static const struct clksel_rate emu_src_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate emu_src_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate emu_src_per_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate emu_src_mpu_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel emu_src_clksel[] = {
-	{ .parent = &sys_ck,		.rates = emu_src_sys_rates },
-	{ .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates },
-	{ .parent = &emu_per_alwon_ck,	.rates = emu_src_per_rates },
-	{ .parent = &emu_mpu_alwon_ck,	.rates = emu_src_mpu_rates },
-	{ .parent = NULL },
-};
-
-/*
- * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only
- * to switch the source of some of the EMU clocks.
- * XXX Are there CLKEN bits for these EMU clks?
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
  */
-static struct clk emu_src_ck = {
-	.name		= "emu_src_ck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
-	.clksel		= emu_src_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate pclk_emu_rates[] = {
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel pclk_emu_clksel[] = {
-	{ .parent = &emu_src_ck, .rates = pclk_emu_rates },
-	{ .parent = NULL },
-};
-
-static struct clk pclk_fck = {
-	.name		= "pclk_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
-	.clksel		= pclk_emu_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate pclkx2_emu_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel pclkx2_emu_clksel[] = {
-	{ .parent = &emu_src_ck, .rates = pclkx2_emu_rates },
-	{ .parent = NULL },
-};
-
-static struct clk pclkx2_fck = {
-	.name		= "pclkx2_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
-	.clksel		= pclkx2_emu_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel atclk_emu_clksel[] = {
-	{ .parent = &emu_src_ck, .rates = div2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk atclk_fck = {
-	.name		= "atclk_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
-	.clksel		= atclk_emu_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk traceclk_src_fck = {
-	.name		= "traceclk_src_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
-	.clksel		= emu_src_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate traceclk_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel traceclk_clksel[] = {
-	{ .parent = &traceclk_src_fck, .rates = traceclk_rates },
-	{ .parent = NULL },
-};
-
-static struct clk traceclk_fck = {
-	.name		= "traceclk_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
-	.clksel		= traceclk_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* SR clocks */
-
-/* SmartReflex fclk (VDD1) */
-static struct clk sr1_fck = {
-	.name		= "sr1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* SmartReflex fclk (VDD2) */
-static struct clk sr2_fck = {
-	.name		= "sr2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
 
-static struct clk sr_l4_ick = {
-	.name		= "sr_l4_ick",
-	.ops		= &clkops_null, /* RMK: missing? */
-	.parent		= &l4_ick,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
 
-/* SECURE_32K_FCK clocks */
+int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
+int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
+void omap3_clk_lock_dpll5(void);
 
-static struct clk gpt12_fck = {
-	.name		= "gpt12_fck",
-	.ops		= &clkops_null,
-	.parent		= &secure_32k_fck,
-	.recalc		= &followparent_recalc,
-};
+extern struct clk *sdrc_ick_p;
+extern struct clk *arm_fck_p;
 
-static struct clk wdt1_fck = {
-	.name		= "wdt1_fck",
-	.ops		= &clkops_null,
-	.parent		= &secure_32k_fck,
-	.recalc		= &followparent_recalc,
-};
+/* OMAP34xx-specific clkops */
+extern const struct clkops clkops_omap3430es2_ssi_wait;
+extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
+extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
+extern const struct clkops clkops_noncore_dpll_ops;
 
 #endif
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
new file mode 100644
index 000000000000..8bdcc9cc7f9a
--- /dev/null
+++ b/arch/arm/mach-omap2/clock34xx_data.c
@@ -0,0 +1,3289 @@
+/*
+ * OMAP3 clock data
+ *
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * With many device clock fixes by Kevin Hilman and Jouni Högander
+ * DPLL bypass clock support added by Roman Tereshonkov
+ *
+ */
+
+/*
+ * Virtual clocks are introduced as convenient tools.
+ * They are sources for other clocks and not supposed
+ * to be requested from drivers directly.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+
+#include <plat/control.h>
+#include <plat/clkdev_omap.h>
+
+#include "clock.h"
+#include "clock34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+
+/*
+ * clocks
+ */
+
+#define OMAP_CM_REGADDR		OMAP34XX_CM_REGADDR
+
+/* Maximum DPLL multiplier, divider values for OMAP3 */
+#define OMAP3_MAX_DPLL_MULT		2048
+#define OMAP3_MAX_DPLL_DIV		128
+
+/*
+ * DPLL1 supplies clock to the MPU.
+ * DPLL2 supplies clock to the IVA2.
+ * DPLL3 supplies CORE domain clocks.
+ * DPLL4 supplies peripheral clocks.
+ * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
+ */
+
+/* Forward declarations for DPLL bypass clocks */
+static struct clk dpll1_fck;
+static struct clk dpll2_fck;
+
+/* PRM CLOCKS */
+
+/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
+static struct clk omap_32k_fck = {
+	.name		= "omap_32k_fck",
+	.ops		= &clkops_null,
+	.rate		= 32768,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk secure_32k_fck = {
+	.name		= "secure_32k_fck",
+	.ops		= &clkops_null,
+	.rate		= 32768,
+	.flags		= RATE_FIXED,
+};
+
+/* Virtual source clocks for osc_sys_ck */
+static struct clk virt_12m_ck = {
+	.name		= "virt_12m_ck",
+	.ops		= &clkops_null,
+	.rate		= 12000000,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk virt_13m_ck = {
+	.name		= "virt_13m_ck",
+	.ops		= &clkops_null,
+	.rate		= 13000000,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk virt_16_8m_ck = {
+	.name		= "virt_16_8m_ck",
+	.ops		= &clkops_null,
+	.rate		= 16800000,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk virt_19_2m_ck = {
+	.name		= "virt_19_2m_ck",
+	.ops		= &clkops_null,
+	.rate		= 19200000,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk virt_26m_ck = {
+	.name		= "virt_26m_ck",
+	.ops		= &clkops_null,
+	.rate		= 26000000,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk virt_38_4m_ck = {
+	.name		= "virt_38_4m_ck",
+	.ops		= &clkops_null,
+	.rate		= 38400000,
+	.flags		= RATE_FIXED,
+};
+
+static const struct clksel_rate osc_sys_12m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_13m_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_16_8m_rates[] = {
+	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_19_2m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_26m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_38_4m_rates[] = {
+	{ .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel osc_sys_clksel[] = {
+	{ .parent = &virt_12m_ck,   .rates = osc_sys_12m_rates },
+	{ .parent = &virt_13m_ck,   .rates = osc_sys_13m_rates },
+	{ .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates },
+	{ .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates },
+	{ .parent = &virt_26m_ck,   .rates = osc_sys_26m_rates },
+	{ .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates },
+	{ .parent = NULL },
+};
+
+/* Oscillator clock */
+/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
+static struct clk osc_sys_ck = {
+	.name		= "osc_sys_ck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_PRM_CLKSEL,
+	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
+	.clksel		= osc_sys_clksel,
+	/* REVISIT: deal with autoextclkmode? */
+	.flags		= RATE_FIXED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate div2_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel sys_clksel[] = {
+	{ .parent = &osc_sys_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */
+/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
+static struct clk sys_ck = {
+	.name		= "sys_ck",
+	.ops		= &clkops_null,
+	.parent		= &osc_sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
+	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
+	.clksel		= sys_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk sys_altclk = {
+	.name		= "sys_altclk",
+	.ops		= &clkops_null,
+};
+
+/* Optional external clock input for some McBSPs */
+static struct clk mcbsp_clks = {
+	.name		= "mcbsp_clks",
+	.ops		= &clkops_null,
+};
+
+/* PRM EXTERNAL CLOCK OUTPUT */
+
+static struct clk sys_clkout1 = {
+	.name		= "sys_clkout1",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &osc_sys_ck,
+	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
+	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLLS */
+
+/* CM CLOCKS */
+
+static const struct clksel_rate div16_dpll_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 5, .val = 5, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 7, .val = 7, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_343X },
+	{ .div = 10, .val = 10, .flags = RATE_IN_343X },
+	{ .div = 11, .val = 11, .flags = RATE_IN_343X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_343X },
+	{ .div = 13, .val = 13, .flags = RATE_IN_343X },
+	{ .div = 14, .val = 14, .flags = RATE_IN_343X },
+	{ .div = 15, .val = 15, .flags = RATE_IN_343X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+/* DPLL1 */
+/* MPU clock source */
+/* Type: DPLL */
+static struct dpll_data dpll1_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
+	.clk_bypass	= &dpll1_fck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_MPU_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
+	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.auto_recal_bit	= OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_MPU_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+	.autoidle_mask	= OMAP3430_AUTO_MPU_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.idlest_mask	= OMAP3430_ST_MPU_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll1_ck = {
+	.name		= "dpll1_ck",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll1_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll1_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed.
+ */
+static struct clk dpll1_x2_ck = {
+	.name		= "dpll1_x2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll1_ck,
+	.clkdm_name	= "dpll1_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */
+static const struct clksel div16_dpll1_x2m2_clksel[] = {
+	{ .parent = &dpll1_x2_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * Does not exist in the TRM - needed to separate the M2 divider from
+ * bypass selection in mpu_ck
+ */
+static struct clk dpll1_x2m2_ck = {
+	.name		= "dpll1_x2m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll1_x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
+	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div16_dpll1_x2m2_clksel,
+	.clkdm_name	= "dpll1_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DPLL2 */
+/* IVA2 clock source */
+/* Type: DPLL */
+
+static struct dpll_data dpll2_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
+	.clk_bypass	= &dpll2_fck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_IVA2_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
+	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
+				(1 << DPLL_LOW_POWER_BYPASS),
+	.auto_recal_bit	= OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+	.autoidle_mask	= OMAP3430_AUTO_IVA2_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
+	.idlest_mask	= OMAP3430_ST_IVA2_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll2_ck = {
+	.name		= "dpll2_ck",
+	.ops		= &clkops_noncore_dpll_ops,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll2_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll2_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+static const struct clksel div16_dpll2_m2x2_clksel[] = {
+	{ .parent = &dpll2_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT
+ * or CLKOUTX2. CLKOUT seems most plausible.
+ */
+static struct clk dpll2_m2_ck = {
+	.name		= "dpll2_m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
+					  OMAP3430_CM_CLKSEL2_PLL),
+	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div16_dpll2_m2x2_clksel,
+	.clkdm_name	= "dpll2_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * DPLL3
+ * Source clock for all interfaces and for some device fclks
+ * REVISIT: Also supports fast relock bypass - not included below
+ */
+static struct dpll_data dpll3_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_CORE_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+	.autoidle_mask	= OMAP3430_AUTO_CORE_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.idlest_mask	= OMAP3430_ST_CORE_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll3_ck = {
+	.name		= "dpll3_ck",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll3_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed
+ */
+static struct clk dpll3_x2_ck = {
+	.name		= "dpll3_x2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_ck,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel_rate div31_dpll3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2 },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2 },
+	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2 },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2 },
+	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2 },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2 },
+	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2 },
+	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2 },
+	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2 },
+	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2 },
+	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2 },
+	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2 },
+	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2 },
+	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2 },
+	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2 },
+	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2 },
+	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2 },
+	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2 },
+	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2 },
+	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2 },
+	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2 },
+	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2 },
+	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2 },
+	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2 },
+	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2 },
+	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2 },
+	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2 },
+	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2 },
+	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2 },
+	{ .div = 0 },
+};
+
+static const struct clksel div31_dpll3m2_clksel[] = {
+	{ .parent = &dpll3_ck, .rates = div31_dpll3_rates },
+	{ .parent = NULL }
+};
+
+/* DPLL3 output M2 - primary control point for CORE speed */
+static struct clk dpll3_m2_ck = {
+	.name		= "dpll3_m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div31_dpll3m2_clksel,
+	.clkdm_name	= "dpll3_clkdm",
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap3_core_dpll_m2_set_rate,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_m2_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dpll3_m2x2_ck = {
+	.name		= "dpll3_m2x2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_m2_ck,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static const struct clksel div16_dpll3_clksel[] = {
+	{ .parent = &dpll3_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/* This virtual clock is the source for dpll3_m3x2_ck */
+static struct clk dpll3_m3_ck = {
+	.name		= "dpll3_m3_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
+	.clksel		= div16_dpll3_clksel,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll3_m3x2_ck = {
+	.name		= "dpll3_m3x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll3_m3_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static struct clk emu_core_alwon_ck = {
+	.name		= "emu_core_alwon_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_m3x2_ck,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL4 */
+/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
+/* Type: DPLL */
+static struct dpll_data dpll4_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
+	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.idlest_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll4_ck = {
+	.name		= "dpll4_ck",
+	.ops		= &clkops_noncore_dpll_ops,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll4_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_dpll4_set_rate,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed --
+ * XXX does this serve any downstream clocks?
+ */
+static struct clk dpll4_x2_ck = {
+	.name		= "dpll4_x2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel div16_dpll4_clksel[] = {
+	{ .parent = &dpll4_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/* This virtual clock is the source for dpll4_m2x2_ck */
+static struct clk dpll4_m2_ck = {
+	.name		= "dpll4_m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
+	.clksel_mask	= OMAP3430_DIV_96M_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m2x2_ck = {
+	.name		= "dpll4_m2x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/*
+ * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
+ * PRM_96M_ALWON_(F)CLK.  Two clocks then emerge from the PRM:
+ * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and
+ * CM_96K_(F)CLK.
+ */
+static struct clk omap_96m_alwon_fck = {
+	.name		= "omap_96m_alwon_fck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_m2x2_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cm_96m_fck = {
+	.name		= "cm_96m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_96m_alwon_fck,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel_rate omap_96m_dpll_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_96m_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_96m_fck_clksel[] = {
+	{ .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates },
+	{ .parent = &sys_ck,	 .rates = omap_96m_sys_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_96m_fck = {
+	.name		= "omap_96m_fck",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_96M_MASK,
+	.clksel		= omap_96m_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m3x2_ck */
+static struct clk dpll4_m3_ck = {
+	.name		= "dpll4_m3_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m3x2_ck = {
+	.name		= "dpll4_m3x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_54m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_54m_clksel[] = {
+	{ .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates },
+	{ .parent = &sys_altclk,    .rates = omap_54m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_54m_fck = {
+	.name		= "omap_54m_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_54M_MASK,
+	.clksel		= omap_54m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate omap_48m_cm96m_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_48m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_48m_clksel[] = {
+	{ .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates },
+	{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_48m_fck = {
+	.name		= "omap_48m_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_48M_MASK,
+	.clksel		= omap_48m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk omap_12m_fck = {
+	.name		= "omap_12m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_48m_fck,
+	.fixed_div	= 4,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+/* This virstual clock is the source for dpll4_m4x2_ck */
+static struct clk dpll4_m4_ck = {
+	.name		= "dpll4_m4_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+	.set_rate	= &omap2_clksel_set_rate,
+	.round_rate	= &omap2_clksel_round_rate,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m4x2_ck = {
+	.name		= "dpll4_m4x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m4_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m5x2_ck */
+static struct clk dpll4_m5_ck = {
+	.name		= "dpll4_m5_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m5x2_ck = {
+	.name		= "dpll4_m5x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m5_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m6x2_ck */
+static struct clk dpll4_m6_ck = {
+	.name		= "dpll4_m6_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m6x2_ck = {
+	.name		= "dpll4_m6x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m6_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static struct clk emu_per_alwon_ck = {
+	.name		= "emu_per_alwon_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_m6x2_ck,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL5 */
+/* Supplies 120MHz clock, USIM source clock */
+/* Type: DPLL */
+/* 3430ES2 only */
+static struct dpll_data dpll5_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
+	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
+	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+	.auto_recal_bit	= OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
+	.autoidle_mask	= OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
+	.idlest_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll5_ck = {
+	.name		= "dpll5_ck",
+	.ops		= &clkops_noncore_dpll_ops,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll5_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll5_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+static const struct clksel div16_dpll5_clksel[] = {
+	{ .parent = &dpll5_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dpll5_m2_ck = {
+	.name		= "dpll5_m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll5_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
+	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
+	.clksel		= div16_dpll5_clksel,
+	.clkdm_name	= "dpll5_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CM EXTERNAL CLOCK OUTPUTS */
+
+static const struct clksel_rate clkout2_src_core_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_96m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_54m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel clkout2_src_clksel[] = {
+	{ .parent = &core_ck,		.rates = clkout2_src_core_rates },
+	{ .parent = &sys_ck,		.rates = clkout2_src_sys_rates },
+	{ .parent = &cm_96m_fck,	.rates = clkout2_src_96m_rates },
+	{ .parent = &omap_54m_fck,	.rates = clkout2_src_54m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk clkout2_src_ck = {
+	.name		= "clkout2_src_ck",
+	.ops		= &clkops_omap2_dflt,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.enable_bit	= OMAP3430_CLKOUT2_EN_SHIFT,
+	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
+	.clksel		= clkout2_src_clksel,
+	.clkdm_name	= "core_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate sys_clkout2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 16, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkout2_clksel[] = {
+	{ .parent = &clkout2_src_ck, .rates = sys_clkout2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk sys_clkout2 = {
+	.name		= "sys_clkout2",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
+	.clksel		= sys_clkout2_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CM OUTPUT CLOCKS */
+
+static struct clk corex2_fck = {
+	.name		= "corex2_fck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_m2x2_ck,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL power domain clock controls */
+
+static const struct clksel_rate div4_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel div4_core_clksel[] = {
+	{ .parent = &core_ck, .rates = div4_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * REVISIT: Are these in DPLL power domain or CM power domain? docs
+ * may be inconsistent here?
+ */
+static struct clk dpll1_fck = {
+	.name		= "dpll1_fck",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
+	.clksel		= div4_core_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mpu_ck = {
+	.name		= "mpu_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll1_x2m2_ck,
+	.clkdm_name	= "mpu_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
+static const struct clksel_rate arm_fck_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel arm_fck_clksel[] = {
+	{ .parent = &mpu_ck, .rates = arm_fck_rates },
+	{ .parent = NULL }
+};
+
+static struct clk arm_fck = {
+	.name		= "arm_fck",
+	.ops		= &clkops_null,
+	.parent		= &mpu_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
+	.clksel		= arm_fck_clksel,
+	.clkdm_name	= "mpu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* XXX What about neon_clkdm ? */
+
+/*
+ * REVISIT: This clock is never specifically defined in the 3430 TRM,
+ * although it is referenced - so this is a guess
+ */
+static struct clk emu_mpu_alwon_ck = {
+	.name		= "emu_mpu_alwon_ck",
+	.ops		= &clkops_null,
+	.parent		= &mpu_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dpll2_fck = {
+	.name		= "dpll2_fck",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
+	.clksel		= div4_core_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk iva2_ck = {
+	.name		= "iva2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll2_m2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
+	.clkdm_name	= "iva2_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* Common interface clocks */
+
+static const struct clksel div2_core_clksel[] = {
+	{ .parent = &core_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l3_ick = {
+	.name		= "l3_ick",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
+	.clksel		= div2_core_clksel,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel div2_l3_clksel[] = {
+	{ .parent = &l3_ick, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l4_ick = {
+	.name		= "l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &l3_ick,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
+	.clksel		= div2_l3_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+
+};
+
+static const struct clksel div2_l4_clksel[] = {
+	{ .parent = &l4_ick, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk rm_ick = {
+	.name		= "rm_ick",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_RM_MASK,
+	.clksel		= div2_l4_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* GFX power domain */
+
+/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */
+
+static const struct clksel gfx_l3_clksel[] = {
+	{ .parent = &l3_ick, .rates = gfx_l3_rates },
+	{ .parent = NULL }
+};
+
+/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */
+static struct clk gfx_l3_ck = {
+	.name		= "gfx_l3_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_l3_fck = {
+	.name		= "gfx_l3_fck",
+	.ops		= &clkops_null,
+	.parent		= &gfx_l3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_l3_clksel,
+	.clkdm_name	= "gfx_3430es1_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gfx_l3_ick = {
+	.name		= "gfx_l3_ick",
+	.ops		= &clkops_null,
+	.parent		= &gfx_l3_ck,
+	.clkdm_name	= "gfx_3430es1_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_cg1_ck = {
+	.name		= "gfx_cg1_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
+	.clkdm_name	= "gfx_3430es1_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_cg2_ck = {
+	.name		= "gfx_cg2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
+	.clkdm_name	= "gfx_3430es1_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* SGX power domain - 3430ES2 only */
+
+static const struct clksel_rate sgx_core_rates[] = {
+	{ .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 4, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate sgx_96m_rates[] = {
+	{ .div = 1,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel sgx_clksel[] = {
+	{ .parent = &core_ck,	 .rates = sgx_core_rates },
+	{ .parent = &cm_96m_fck, .rates = sgx_96m_rates },
+	{ .parent = NULL },
+};
+
+static struct clk sgx_fck = {
+	.name		= "sgx_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
+	.clksel		= sgx_clksel,
+	.clkdm_name	= "sgx_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk sgx_ick = {
+	.name		= "sgx_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
+	.clkdm_name	= "sgx_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE power domain */
+
+static struct clk d2d_26m_fck = {
+	.name		= "d2d_26m_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk modem_fck = {
+	.name		= "modem_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sad2d_ick = {
+	.name		= "sad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mad2d_ick = {
+	.name		= "mad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430_EN_MAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel omap343x_gpt_clksel[] = {
+	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
+	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
+	{ .parent = NULL}
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT10_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT11_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk cpefuse_fck = {
+	.name		= "cpefuse_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ts_fck = {
+	.name		= "ts_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &omap_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbtll_fck = {
+	.name		= "usbtll_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &dpll5_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE 96M FCLK-derived clocks */
+
+static struct clk core_96m_fck = {
+	.name		= "core_96m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_96m_fck,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs3_fck = {
+	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_fck = {
+	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_fck = {
+	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_fck = {
+	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 3,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck;
+ * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck.
+ */
+static const struct clksel_rate common_mcbsp_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel mcbsp_15_clksel[] = {
+	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mcbsp5_fck = {
+	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 5,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
+	.clksel		= mcbsp_15_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
+	.clksel		= mcbsp_15_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CORE_48M_FCK-derived clocks */
+
+static struct clk core_48m_fck = {
+	.name		= "core_48m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_48m_fck,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_fck = {
+	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 4,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_fck = {
+	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 3,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fshostusb_fck = {
+	.name		= "fshostusb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE_12M_FCK based clocks */
+
+static struct clk core_12m_fck = {
+	.name		= "core_12m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_12m_fck,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_12m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL3-derived clock */
+
+static const struct clksel_rate ssi_ssr_corex2_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel ssi_ssr_clksel[] = {
+	{ .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk ssi_ssr_fck_3430es1 = {
+	.name		= "ssi_ssr_fck",
+	.ops		= &clkops_omap2_dflt,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_ssr_fck_3430es2 = {
+	.name		= "ssi_ssr_fck",
+	.ops		= &clkops_omap3430es2_ssi_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es1 = {
+	.name		= "ssi_sst_fck",
+	.ops		= &clkops_null,
+	.parent		= &ssi_ssr_fck_3430es1,
+	.fixed_div	= 2,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es2 = {
+	.name		= "ssi_sst_fck",
+	.ops		= &clkops_null,
+	.parent		= &ssi_ssr_fck_3430es2,
+	.fixed_div	= 2,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+
+
+/* CORE_L3_ICK based clocks */
+
+/*
+ * XXX must add clk_enable/clk_disable for these if standard code won't
+ * handle it
+ */
+static struct clk core_l3_ick = {
+	.name		= "core_l3_ick",
+	.ops		= &clkops_null,
+	.parent		= &l3_ick,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_3430es1 = {
+	.name		= "hsotgusb_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_3430es2 = {
+	.name		= "hsotgusb_ick",
+	.ops		= &clkops_omap3430es2_hsotgusb_wait,
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdrc_ick = {
+	.name		= "sdrc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_fck = {
+	.name		= "gpmc_fck",
+	.ops		= &clkops_null,
+	.parent		= &core_l3_ick,
+	.flags		= ENABLE_ON_INIT, /* huh? */
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* SECURITY_L3_ICK based clocks */
+
+static struct clk security_l3_ick = {
+	.name		= "security_l3_ick",
+	.ops		= &clkops_null,
+	.parent		= &l3_ick,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_PKA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE_L4_ICK based clocks */
+
+static struct clk core_l4_ick = {
+	.name		= "core_l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbtll_ick = {
+	.name		= "usbtll_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs3_ick = {
+	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* Intersystem Communication Registers - chassis mode only */
+static struct clk icr_ick = {
+	.name		= "icr_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes2_ick = {
+	.name		= "aes2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha12_ick = {
+	.name		= "sha12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des2_ick = {
+	.name		= "des2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_ick = {
+	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_ick = {
+	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_ick = {
+	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 4,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_ick = {
+	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 3,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_ick = {
+	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 3,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_ick = {
+	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 5,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
+	.flags		= ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+/* SSI_L4_ICK based clocks */
+
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ssi_ick_3430es1 = {
+	.name		= "ssi_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &ssi_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ssi_ick_3430es2 = {
+	.name		= "ssi_ick",
+	.ops		= &clkops_omap3430es2_ssi_wait,
+	.parent		= &ssi_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* REVISIT: Technically the TRM claims that this is CORE_CLK based,
+ * but l4_ick makes more sense to me */
+
+static const struct clksel usb_l4_clksel[] = {
+	{ .parent = &l4_ick, .rates = div2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk usb_l4_ick = {
+	.name		= "usb_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
+	.clksel		= usb_l4_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* SECURITY_L4_ICK2 based clocks */
+
+static struct clk security_l4_ick2 = {
+	.name		= "security_l4_ick2",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes1_ick = {
+	.name		= "aes1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_AES1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_RNG_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha11_ick = {
+	.name		= "sha11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_SHA11_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des1_ick = {
+	.name		= "des1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_DES1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* DSS */
+static struct clk dss1_alwon_fck_3430es1 = {
+	.name		= "dss1_alwon_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &dpll4_m4x2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss1_alwon_fck_3430es2 = {
+	.name		= "dss1_alwon_fck",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &dpll4_m4x2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_tv_fck = {
+	.name		= "dss_tv_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &omap_54m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_TV_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_96m_fck = {
+	.name		= "dss_96m_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &omap_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_TV_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss2_alwon_fck = {
+	.name		= "dss2_alwon_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_ick_3430es1 = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "dss_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_ick_3430es2 = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "dss_ick",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* CAM */
+
+static struct clk cam_mclk = {
+	.name		= "cam_mclk",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &dpll4_m5x2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.clkdm_name	= "cam_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_ick = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "cam_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.clkdm_name	= "cam_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk csi2_96m_fck = {
+	.name		= "csi2_96m_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_CSI2_SHIFT,
+	.clkdm_name	= "cam_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* USBHOST - 3430ES2 only */
+
+static struct clk usbhost_120m_fck = {
+	.name		= "usbhost_120m_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &dpll5_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
+	.clkdm_name	= "usbhost_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_48m_fck = {
+	.name		= "usbhost_48m_fck",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &omap_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
+	.clkdm_name	= "usbhost_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_ick = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "usbhost_ick",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
+	.clkdm_name	= "usbhost_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* WKUP */
+
+static const struct clksel_rate usim_96m_rates[] = {
+	{ .div = 2,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 4,  .val = 4, .flags = RATE_IN_343X },
+	{ .div = 8,  .val = 5, .flags = RATE_IN_343X },
+	{ .div = 10, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate usim_120m_rates[] = {
+	{ .div = 4,  .val = 7,	.flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 8,  .val = 8,	.flags = RATE_IN_343X },
+	{ .div = 16, .val = 9,	.flags = RATE_IN_343X },
+	{ .div = 20, .val = 10, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel usim_clksel[] = {
+	{ .parent = &omap_96m_fck,	.rates = usim_96m_rates },
+	{ .parent = &dpll5_m2_ck,	.rates = usim_120m_rates },
+	{ .parent = &sys_ck,		.rates = div2_rates },
+	{ .parent = NULL },
+};
+
+/* 3430ES2 only */
+static struct clk usim_fck = {
+	.name		= "usim_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES2_CLKSEL_USIMOCP_MASK,
+	.clksel		= usim_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT1_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk wkup_32k_fck = {
+	.name		= "wkup_32k_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_32k_fck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio1_dbck = {
+	.name		= "gpio1_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &wkup_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_fck = {
+	.name		= "wdt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wkup_l4_ick = {
+	.name		= "wkup_l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* 3430ES2 only */
+/* Never specifically named in the TRM, so we have to infer a likely name */
+static struct clk usim_ick = {
+	.name		= "usim_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_ick = {
+	.name		= "wdt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio1_ick = {
+	.name		= "gpio1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omap_32ksync_ick = {
+	.name		= "omap_32ksync_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* XXX This clock no longer exists in 3430 TRM rev F */
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+
+
+/* PER clock domain */
+
+static struct clk per_96m_fck = {
+	.name		= "per_96m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_96m_alwon_fck,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk per_48m_fck = {
+	.name		= "per_48m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_48m_fck,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT2_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT3_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT4_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT5_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT6_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT7_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT8_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT9_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk per_32k_alwon_fck = {
+	.name		= "per_32k_alwon_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_32k_fck,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_dbck = {
+	.name		= "gpio6_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_dbck = {
+	.name		= "gpio5_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_dbck = {
+	.name		= "gpio4_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_dbck = {
+	.name		= "gpio3_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_dbck = {
+	.name		= "gpio2_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk per_l4_ick = {
+	.name		= "per_l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_ick = {
+	.name		= "gpio6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_ick = {
+	.name		= "gpio5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_ick = {
+	.name		= "gpio4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_ick = {
+	.name		= "gpio3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_ick = {
+	.name		= "gpio2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+	.name		= "wdt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_ick = {
+	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 3,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_ick = {
+	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 4,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel mcbsp_234_clksel[] = {
+	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp3_fck = {
+	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 3,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp4_fck = {
+	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 4,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* EMU clocks */
+
+/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */
+
+static const struct clksel_rate emu_src_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_per_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_mpu_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel emu_src_clksel[] = {
+	{ .parent = &sys_ck,		.rates = emu_src_sys_rates },
+	{ .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates },
+	{ .parent = &emu_per_alwon_ck,	.rates = emu_src_per_rates },
+	{ .parent = &emu_mpu_alwon_ck,	.rates = emu_src_mpu_rates },
+	{ .parent = NULL },
+};
+
+/*
+ * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only
+ * to switch the source of some of the EMU clocks.
+ * XXX Are there CLKEN bits for these EMU clks?
+ */
+static struct clk emu_src_ck = {
+	.name		= "emu_src_ck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
+	.clksel		= emu_src_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate pclk_emu_rates[] = {
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel pclk_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = pclk_emu_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pclk_fck = {
+	.name		= "pclk_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
+	.clksel		= pclk_emu_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate pclkx2_emu_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel pclkx2_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = pclkx2_emu_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pclkx2_fck = {
+	.name		= "pclkx2_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
+	.clksel		= pclkx2_emu_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel atclk_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = div2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk atclk_fck = {
+	.name		= "atclk_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
+	.clksel		= atclk_emu_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk traceclk_src_fck = {
+	.name		= "traceclk_src_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
+	.clksel		= emu_src_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate traceclk_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel traceclk_clksel[] = {
+	{ .parent = &traceclk_src_fck, .rates = traceclk_rates },
+	{ .parent = NULL },
+};
+
+static struct clk traceclk_fck = {
+	.name		= "traceclk_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
+	.clksel		= traceclk_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* SR clocks */
+
+/* SmartReflex fclk (VDD1) */
+static struct clk sr1_fck = {
+	.name		= "sr1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* SmartReflex fclk (VDD2) */
+static struct clk sr2_fck = {
+	.name		= "sr2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sr_l4_ick = {
+	.name		= "sr_l4_ick",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &l4_ick,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* SECURE_32K_FCK clocks */
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.ops		= &clkops_null,
+	.parent		= &secure_32k_fck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_fck = {
+	.name		= "wdt1_fck",
+	.ops		= &clkops_null,
+	.parent		= &secure_32k_fck,
+	.recalc		= &followparent_recalc,
+};
+
+
+/*
+ * clkdev
+ */
+
+static struct omap_clk omap34xx_clks[] = {
+	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_343X),
+	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_343X),
+	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_343X),
+	CLK(NULL,	"virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2),
+	CLK(NULL,	"virt_19_2m_ck", &virt_19_2m_ck, CK_343X),
+	CLK(NULL,	"virt_26m_ck",	&virt_26m_ck,	CK_343X),
+	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_343X),
+	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_343X),
+	CLK(NULL,	"sys_ck",	&sys_ck,	CK_343X),
+	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_343X),
+	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_343X),
+	CLK(NULL,	"sys_clkout1",	&sys_clkout1,	CK_343X),
+	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_343X),
+	CLK(NULL,	"dpll1_x2_ck",	&dpll1_x2_ck,	CK_343X),
+	CLK(NULL,	"dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X),
+	CLK(NULL,	"dpll2_ck",	&dpll2_ck,	CK_343X),
+	CLK(NULL,	"dpll2_m2_ck",	&dpll2_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_ck",	&dpll3_ck,	CK_343X),
+	CLK(NULL,	"core_ck",	&core_ck,	CK_343X),
+	CLK(NULL,	"dpll3_x2_ck",	&dpll3_x2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m2_ck",	&dpll3_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
+	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
+	CLK("etb",	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_343X),
+	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_343X),
+	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
+	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_343X),
+	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_343X),
+	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_343X),
+	CLK(NULL,	"omap_48m_fck",	&omap_48m_fck,	CK_343X),
+	CLK(NULL,	"omap_12m_fck",	&omap_12m_fck,	CK_343X),
+	CLK(NULL,	"dpll4_m2_ck",	&dpll4_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m3_ck",	&dpll4_m3_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m4_ck",	&dpll4_m4_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m5_ck",	&dpll4_m5_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
+	CLK("etb",	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2),
+	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2),
+	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_343X),
+	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_343X),
+	CLK(NULL,	"corex2_fck",	&corex2_fck,	CK_343X),
+	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_343X),
+	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_343X),
+	CLK(NULL,	"arm_fck",	&arm_fck,	CK_343X),
+	CLK("etb",	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_343X),
+	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_343X),
+	CLK(NULL,	"l3_ick",	&l3_ick,	CK_343X),
+	CLK(NULL,	"l4_ick",	&l4_ick,	CK_343X),
+	CLK(NULL,	"rm_ick",	&rm_ick,	CK_343X),
+	CLK(NULL,	"gfx_l3_ck",	&gfx_l3_ck,	CK_3430ES1),
+	CLK(NULL,	"gfx_l3_fck",	&gfx_l3_fck,	CK_3430ES1),
+	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
+	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
+	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
+	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2),
+	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2),
+	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
+	CLK(NULL,	"modem_fck",	&modem_fck,	CK_343X),
+	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_343X),
+	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_343X),
+	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_343X),
+	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_343X),
+	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2),
+	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2),
+	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2),
+	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_343X),
+	CLK("mmci-omap-hs.2",	"fck",	&mmchs3_fck,	CK_3430ES2),
+	CLK("mmci-omap-hs.1",	"fck",	&mmchs2_fck,	CK_343X),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_343X),
+	CLK("mmci-omap-hs.0",	"fck",	&mmchs1_fck,	CK_343X),
+	CLK("i2c_omap.3", "fck",	&i2c3_fck,	CK_343X),
+	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_343X),
+	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_343X),
+	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_343X),
+	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_343X),
+	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_343X),
+	CLK("omap2_mcspi.4", "fck",	&mcspi4_fck,	CK_343X),
+	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_343X),
+	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_343X),
+	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_343X),
+	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_343X),
+	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_343X),
+	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
+	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_343X),
+	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_343X),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es2,	CK_3430ES2),
+	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2),
+	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
+	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
+	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_343X),
+	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_343X),
+	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2),
+	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2),
+	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
+	CLK(NULL,	"aes2_ick",	&aes2_ick,	CK_343X),
+	CLK(NULL,	"sha12_ick",	&sha12_ick,	CK_343X),
+	CLK(NULL,	"des2_ick",	&des2_ick,	CK_343X),
+	CLK("mmci-omap-hs.1",	"ick",	&mmchs2_ick,	CK_343X),
+	CLK("mmci-omap-hs.0",	"ick",	&mmchs1_ick,	CK_343X),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_343X),
+	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_343X),
+	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_343X),
+	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_343X),
+	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_343X),
+	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_343X),
+	CLK("i2c_omap.3", "ick",	&i2c3_ick,	CK_343X),
+	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_343X),
+	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_343X),
+	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_343X),
+	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_343X),
+	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_343X),
+	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_343X),
+	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_343X),
+	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_343X),
+	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
+	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_343X),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_343X),
+	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es2,	CK_3430ES2),
+	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
+	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
+	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
+	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
+	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
+	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
+	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2),
+	CLK("omapdss",	"tv_fck",	&dss_tv_fck,	CK_343X),
+	CLK("omapdss",	"video_fck",	&dss_96m_fck,	CK_343X),
+	CLK("omapdss",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
+	CLK("omapdss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
+	CLK("omapdss",	"ick",		&dss_ick_3430es2,	CK_3430ES2),
+	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
+	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
+	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
+	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
+	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2),
+	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2),
+	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_343X),
+	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_343X),
+	CLK(NULL,	"gpio1_dbck",	&gpio1_dbck,	CK_343X),
+	CLK("omap_wdt",	"fck",		&wdt2_fck,	CK_343X),
+	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_343X),
+	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2),
+	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_343X),
+	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_343X),
+	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_343X),
+	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_343X),
+	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_343X),
+	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_343X),
+	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_343X),
+	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_343X),
+	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_343X),
+	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_343X),
+	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_343X),
+	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_343X),
+	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_343X),
+	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_343X),
+	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_343X),
+	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_343X),
+	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_343X),
+	CLK(NULL,	"per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X),
+	CLK(NULL,	"gpio6_dbck",	&gpio6_dbck,	CK_343X),
+	CLK(NULL,	"gpio5_dbck",	&gpio5_dbck,	CK_343X),
+	CLK(NULL,	"gpio4_dbck",	&gpio4_dbck,	CK_343X),
+	CLK(NULL,	"gpio3_dbck",	&gpio3_dbck,	CK_343X),
+	CLK(NULL,	"gpio2_dbck",	&gpio2_dbck,	CK_343X),
+	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_343X),
+	CLK(NULL,	"per_l4_ick",	&per_l4_ick,	CK_343X),
+	CLK(NULL,	"gpio6_ick",	&gpio6_ick,	CK_343X),
+	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_343X),
+	CLK(NULL,	"gpio4_ick",	&gpio4_ick,	CK_343X),
+	CLK(NULL,	"gpio3_ick",	&gpio3_ick,	CK_343X),
+	CLK(NULL,	"gpio2_ick",	&gpio2_ick,	CK_343X),
+	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_343X),
+	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_343X),
+	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_343X),
+	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_343X),
+	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_343X),
+	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_343X),
+	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_343X),
+	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_343X),
+	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_343X),
+	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_343X),
+	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_343X),
+	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_343X),
+	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_343X),
+	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_343X),
+	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_343X),
+	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_343X),
+	CLK("etb",	"emu_src_ck",	&emu_src_ck,	CK_343X),
+	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_343X),
+	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_343X),
+	CLK(NULL,	"atclk_fck",	&atclk_fck,	CK_343X),
+	CLK(NULL,	"traceclk_src_fck", &traceclk_src_fck, CK_343X),
+	CLK(NULL,	"traceclk_fck",	&traceclk_fck,	CK_343X),
+	CLK(NULL,	"sr1_fck",	&sr1_fck,	CK_343X),
+	CLK(NULL,	"sr2_fck",	&sr2_fck,	CK_343X),
+	CLK(NULL,	"sr_l4_ick",	&sr_l4_ick,	CK_343X),
+	CLK(NULL,	"secure_32k_fck", &secure_32k_fck, CK_343X),
+	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_343X),
+	CLK(NULL,	"wdt1_fck",	&wdt1_fck,	CK_343X),
+};
+
+
+int __init omap2_clk_init(void)
+{
+	/* struct prcm_config *prcm; */
+	struct omap_clk *c;
+	/* u32 clkrate; */
+	u32 cpu_clkflg;
+
+	if (cpu_is_omap34xx()) {
+		cpu_mask = RATE_IN_343X;
+		cpu_clkflg = CK_343X;
+
+		/*
+		 * Update this if there are further clock changes between ES2
+		 * and production parts
+		 */
+		if (omap_rev() == OMAP3430_REV_ES1_0) {
+			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
+			cpu_clkflg |= CK_3430ES1;
+		} else {
+			cpu_mask |= RATE_IN_3430ES2;
+			cpu_clkflg |= CK_3430ES2;
+		}
+	}
+
+	clk_init(&omap2_clk_functions);
+
+	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+		clk_preinit(c->lk.clk);
+
+	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+		if (c->cpu & cpu_clkflg) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
+			omap2_init_clk_clkdm(c->lk.clk);
+		}
+
+	/* REVISIT: Not yet ready for OMAP3 */
+#if 0
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			break;
+	}
+	curr_prcm_set = prcm;
+#endif
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
+	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/*
+	 * Lock DPLL5 and put it in autoidle.
+	 */
+	if (omap_rev() >= OMAP3430_REV_ES2_0)
+		omap3_clk_lock_dpll5();
+
+	/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */
+	sdrc_ick_p = clk_get(NULL, "sdrc_ick");
+	arm_fck_p = clk_get(NULL, "arm_fck");
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/clock44xx.c b/arch/arm/mach-omap2/clock44xx.c
new file mode 100644
index 000000000000..e370868a79a8
--- /dev/null
+++ b/arch/arm/mach-omap2/clock44xx.c
@@ -0,0 +1,33 @@
+/*
+ * OMAP4-specific clock framework functions
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Rajendra Nayak (rnayak@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include "clock.h"
+
+struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
+};
+
+const struct clkops clkops_noncore_dpll_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+};
+
+void omap2_clk_prepare_for_reboot(void)
+{
+	return;
+}
diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h
new file mode 100644
index 000000000000..59b9ced4daa1
--- /dev/null
+++ b/arch/arm/mach-omap2/clock44xx.h
@@ -0,0 +1,15 @@
+/*
+ * OMAP4 clock function prototypes and macros
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
+
+#define OMAP4430_MAX_DPLL_MULT	2048
+#define OMAP4430_MAX_DPLL_DIV	128
+
+extern const struct clkops clkops_noncore_dpll_ops;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
new file mode 100644
index 000000000000..2210e227d78a
--- /dev/null
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -0,0 +1,2766 @@
+/*
+ * OMAP4 Clock data
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+
+#include <plat/control.h>
+#include <plat/clkdev_omap.h>
+
+#include "clock.h"
+#include "clock44xx.h"
+#include "cm.h"
+#include "cm-regbits-44xx.h"
+#include "prm.h"
+#include "prm-regbits-44xx.h"
+
+/* Root clocks */
+
+static struct clk extalt_clkin_ck = {
+	.name		= "extalt_clkin_ck",
+	.rate		= 59000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk pad_clks_ck = {
+	.name		= "pad_clks_ck",
+	.rate		= 12000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk pad_slimbus_core_clks_ck = {
+	.name		= "pad_slimbus_core_clks_ck",
+	.rate		= 12000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk secure_32k_clk_src_ck = {
+	.name		= "secure_32k_clk_src_ck",
+	.rate		= 32768,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk slimbus_clk = {
+	.name		= "slimbus_clk",
+	.rate		= 12000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk sys_32k_ck = {
+	.name		= "sys_32k_ck",
+	.rate		= 32768,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk virt_12000000_ck = {
+	.name		= "virt_12000000_ck",
+	.ops		= &clkops_null,
+	.rate		= 12000000,
+};
+
+static struct clk virt_13000000_ck = {
+	.name		= "virt_13000000_ck",
+	.ops		= &clkops_null,
+	.rate		= 13000000,
+};
+
+static struct clk virt_16800000_ck = {
+	.name		= "virt_16800000_ck",
+	.ops		= &clkops_null,
+	.rate		= 16800000,
+};
+
+static struct clk virt_19200000_ck = {
+	.name		= "virt_19200000_ck",
+	.ops		= &clkops_null,
+	.rate		= 19200000,
+};
+
+static struct clk virt_26000000_ck = {
+	.name		= "virt_26000000_ck",
+	.ops		= &clkops_null,
+	.rate		= 26000000,
+};
+
+static struct clk virt_27000000_ck = {
+	.name		= "virt_27000000_ck",
+	.ops		= &clkops_null,
+	.rate		= 27000000,
+};
+
+static struct clk virt_38400000_ck = {
+	.name		= "virt_38400000_ck",
+	.ops		= &clkops_null,
+	.rate		= 38400000,
+};
+
+static const struct clksel_rate div_1_0_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_1_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_2_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_3_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_4_rates[] = {
+	{ .div = 1, .val = 4, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_5_rates[] = {
+	{ .div = 1, .val = 5, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_6_rates[] = {
+	{ .div = 1, .val = 6, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_7_rates[] = {
+	{ .div = 1, .val = 7, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkin_sel[] = {
+	{ .parent = &virt_12000000_ck, .rates = div_1_1_rates },
+	{ .parent = &virt_13000000_ck, .rates = div_1_2_rates },
+	{ .parent = &virt_16800000_ck, .rates = div_1_3_rates },
+	{ .parent = &virt_19200000_ck, .rates = div_1_4_rates },
+	{ .parent = &virt_26000000_ck, .rates = div_1_5_rates },
+	{ .parent = &virt_27000000_ck, .rates = div_1_6_rates },
+	{ .parent = &virt_38400000_ck, .rates = div_1_7_rates },
+	{ .parent = NULL },
+};
+
+static struct clk sys_clkin_ck = {
+	.name		= "sys_clkin_ck",
+	.rate		= 38400000,
+	.clksel		= sys_clkin_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_SYS_CLKSEL,
+	.clksel_mask	= OMAP4430_SYS_CLKSEL_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk utmi_phy_clkout_ck = {
+	.name		= "utmi_phy_clkout_ck",
+	.rate		= 12000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk xclk60mhsp1_ck = {
+	.name		= "xclk60mhsp1_ck",
+	.rate		= 12000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk xclk60mhsp2_ck = {
+	.name		= "xclk60mhsp2_ck",
+	.rate		= 12000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk xclk60motg_ck = {
+	.name		= "xclk60motg_ck",
+	.rate		= 60000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+/* Module clocks and DPLL outputs */
+
+static const struct clksel_rate div2_1to2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel dpll_sys_ref_clk_div[] = {
+	{ .parent = &sys_clkin_ck, .rates = div2_1to2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_sys_ref_clk = {
+	.name		= "dpll_sys_ref_clk",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dpll_sys_ref_clk_div,
+	.clksel_reg	= OMAP4430_CM_DPLL_SYS_REF_CLKSEL,
+	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel abe_dpll_refclk_mux_sel[] = {
+	{ .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates },
+	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk abe_dpll_refclk_mux_ck = {
+	.name		= "abe_dpll_refclk_mux_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.clksel		= abe_dpll_refclk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_ABE_PLL_REF_CLKSEL,
+	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_ABE */
+static struct dpll_data dpll_abe_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_ABE,
+	.clk_bypass	= &sys_clkin_ck,
+	.clk_ref	= &abe_dpll_refclk_mux_ck,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_ABE,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_ABE,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_ABE,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_abe_ck = {
+	.name		= "dpll_abe_ck",
+	.parent		= &abe_dpll_refclk_mux_ck,
+	.dpll_data	= &dpll_abe_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_noncore_dpll_ops,
+	.recalc		= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_abe_m2x2_ck = {
+	.name		= "dpll_abe_m2x2_ck",
+	.parent		= &dpll_abe_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk abe_24m_fclk = {
+	.name		= "abe_24m_fclk",
+	.parent		= &dpll_abe_m2x2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div3_1to4_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 4, .val = 2, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel abe_clk_div[] = {
+	{ .parent = &dpll_abe_m2x2_ck, .rates = div3_1to4_rates },
+	{ .parent = NULL },
+};
+
+static struct clk abe_clk = {
+	.name		= "abe_clk",
+	.parent		= &dpll_abe_m2x2_ck,
+	.clksel		= abe_clk_div,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_ABE,
+	.clksel_mask	= OMAP4430_CLKSEL_OPP_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel aess_fclk_div[] = {
+	{ .parent = &abe_clk, .rates = div2_1to2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk aess_fclk = {
+	.name		= "aess_fclk",
+	.parent		= &abe_clk,
+	.clksel		= aess_fclk_div,
+	.clksel_reg	= OMAP4430_CM1_ABE_AESS_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_AESS_FCLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div31_1to31_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 3, .val = 2, .flags = RATE_IN_4430 },
+	{ .div = 4, .val = 3, .flags = RATE_IN_4430 },
+	{ .div = 5, .val = 4, .flags = RATE_IN_4430 },
+	{ .div = 6, .val = 5, .flags = RATE_IN_4430 },
+	{ .div = 7, .val = 6, .flags = RATE_IN_4430 },
+	{ .div = 8, .val = 7, .flags = RATE_IN_4430 },
+	{ .div = 9, .val = 8, .flags = RATE_IN_4430 },
+	{ .div = 10, .val = 9, .flags = RATE_IN_4430 },
+	{ .div = 11, .val = 10, .flags = RATE_IN_4430 },
+	{ .div = 12, .val = 11, .flags = RATE_IN_4430 },
+	{ .div = 13, .val = 12, .flags = RATE_IN_4430 },
+	{ .div = 14, .val = 13, .flags = RATE_IN_4430 },
+	{ .div = 15, .val = 14, .flags = RATE_IN_4430 },
+	{ .div = 16, .val = 15, .flags = RATE_IN_4430 },
+	{ .div = 17, .val = 16, .flags = RATE_IN_4430 },
+	{ .div = 18, .val = 17, .flags = RATE_IN_4430 },
+	{ .div = 19, .val = 18, .flags = RATE_IN_4430 },
+	{ .div = 20, .val = 19, .flags = RATE_IN_4430 },
+	{ .div = 21, .val = 20, .flags = RATE_IN_4430 },
+	{ .div = 22, .val = 21, .flags = RATE_IN_4430 },
+	{ .div = 23, .val = 22, .flags = RATE_IN_4430 },
+	{ .div = 24, .val = 23, .flags = RATE_IN_4430 },
+	{ .div = 25, .val = 24, .flags = RATE_IN_4430 },
+	{ .div = 26, .val = 25, .flags = RATE_IN_4430 },
+	{ .div = 27, .val = 26, .flags = RATE_IN_4430 },
+	{ .div = 28, .val = 27, .flags = RATE_IN_4430 },
+	{ .div = 29, .val = 28, .flags = RATE_IN_4430 },
+	{ .div = 30, .val = 29, .flags = RATE_IN_4430 },
+	{ .div = 31, .val = 30, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel dpll_abe_m3_div[] = {
+	{ .parent = &dpll_abe_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_abe_m3_ck = {
+	.name		= "dpll_abe_m3_ck",
+	.parent		= &dpll_abe_ck,
+	.clksel		= dpll_abe_m3_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_ABE,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel core_hsd_byp_clk_mux_sel[] = {
+	{ .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates },
+	{ .parent = &dpll_abe_m3_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk core_hsd_byp_clk_mux_ck = {
+	.name		= "core_hsd_byp_clk_mux_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.clksel		= core_hsd_byp_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_DPLL_CORE,
+	.clksel_mask	= OMAP4430_DPLL_BYP_CLKSEL_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_CORE */
+static struct dpll_data dpll_core_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_CORE,
+	.clk_bypass	= &core_hsd_byp_clk_mux_ck,
+	.clk_ref	= &dpll_sys_ref_clk,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_CORE,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_CORE,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_CORE,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_core_ck = {
+	.name		= "dpll_core_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.dpll_data	= &dpll_core_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_null,
+	.recalc		= &omap3_dpll_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dpll_core_m6_div[] = {
+	{ .parent = &dpll_core_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_core_m6_ck = {
+	.name		= "dpll_core_m6_ck",
+	.parent		= &dpll_core_ck,
+	.clksel		= dpll_core_m6_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M6_DPLL_CORE,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dbgclk_mux_sel[] = {
+	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
+	{ .parent = &dpll_core_m6_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dbgclk_mux_ck = {
+	.name		= "dbgclk_mux_ck",
+	.parent		= &sys_clkin_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_core_m2_ck = {
+	.name		= "dpll_core_m2_ck",
+	.parent		= &dpll_core_ck,
+	.clksel		= dpll_core_m6_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_CORE,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk ddrphy_ck = {
+	.name		= "ddrphy_ck",
+	.parent		= &dpll_core_m2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_core_m5_ck = {
+	.name		= "dpll_core_m5_ck",
+	.parent		= &dpll_core_ck,
+	.clksel		= dpll_core_m6_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M5_DPLL_CORE,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel div_core_div[] = {
+	{ .parent = &dpll_core_m5_ck, .rates = div2_1to2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk div_core_ck = {
+	.name		= "div_core_ck",
+	.parent		= &dpll_core_m5_ck,
+	.clksel		= div_core_div,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_CORE,
+	.clksel_mask	= OMAP4430_CLKSEL_CORE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div4_1to8_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 4, .val = 2, .flags = RATE_IN_4430 },
+	{ .div = 8, .val = 3, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel div_iva_hs_clk_div[] = {
+	{ .parent = &dpll_core_m5_ck, .rates = div4_1to8_rates },
+	{ .parent = NULL },
+};
+
+static struct clk div_iva_hs_clk = {
+	.name		= "div_iva_hs_clk",
+	.parent		= &dpll_core_m5_ck,
+	.clksel		= div_iva_hs_clk_div,
+	.clksel_reg	= OMAP4430_CM_BYPCLK_DPLL_IVA,
+	.clksel_mask	= OMAP4430_CLKSEL_0_1_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk div_mpu_hs_clk = {
+	.name		= "div_mpu_hs_clk",
+	.parent		= &dpll_core_m5_ck,
+	.clksel		= div_iva_hs_clk_div,
+	.clksel_reg	= OMAP4430_CM_BYPCLK_DPLL_MPU,
+	.clksel_mask	= OMAP4430_CLKSEL_0_1_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_core_m4_ck = {
+	.name		= "dpll_core_m4_ck",
+	.parent		= &dpll_core_ck,
+	.clksel		= dpll_core_m6_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M4_DPLL_CORE,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dll_clk_div_ck = {
+	.name		= "dll_clk_div_ck",
+	.parent		= &dpll_core_m4_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_abe_m2_ck = {
+	.name		= "dpll_abe_m2_ck",
+	.parent		= &dpll_abe_ck,
+	.clksel		= dpll_abe_m3_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_ABE,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_core_m3_ck = {
+	.name		= "dpll_core_m3_ck",
+	.parent		= &dpll_core_ck,
+	.clksel		= dpll_core_m6_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_CORE,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_core_m7_ck = {
+	.name		= "dpll_core_m7_ck",
+	.parent		= &dpll_core_ck,
+	.clksel		= dpll_core_m6_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M7_DPLL_CORE,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel iva_hsd_byp_clk_mux_sel[] = {
+	{ .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates },
+	{ .parent = &div_iva_hs_clk, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk iva_hsd_byp_clk_mux_ck = {
+	.name		= "iva_hsd_byp_clk_mux_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_IVA */
+static struct dpll_data dpll_iva_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_IVA,
+	.clk_bypass	= &iva_hsd_byp_clk_mux_ck,
+	.clk_ref	= &dpll_sys_ref_clk,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_IVA,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_IVA,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_IVA,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_iva_ck = {
+	.name		= "dpll_iva_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.dpll_data	= &dpll_iva_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_noncore_dpll_ops,
+	.recalc		= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dpll_iva_m4_div[] = {
+	{ .parent = &dpll_iva_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_iva_m4_ck = {
+	.name		= "dpll_iva_m4_ck",
+	.parent		= &dpll_iva_ck,
+	.clksel		= dpll_iva_m4_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M4_DPLL_IVA,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_iva_m5_ck = {
+	.name		= "dpll_iva_m5_ck",
+	.parent		= &dpll_iva_ck,
+	.clksel		= dpll_iva_m4_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M5_DPLL_IVA,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_MPU */
+static struct dpll_data dpll_mpu_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_MPU,
+	.clk_bypass	= &div_mpu_hs_clk,
+	.clk_ref	= &dpll_sys_ref_clk,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_MPU,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_MPU,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_MPU,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_mpu_ck = {
+	.name		= "dpll_mpu_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.dpll_data	= &dpll_mpu_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_noncore_dpll_ops,
+	.recalc		= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dpll_mpu_m2_div[] = {
+	{ .parent = &dpll_mpu_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_mpu_m2_ck = {
+	.name		= "dpll_mpu_m2_ck",
+	.parent		= &dpll_mpu_ck,
+	.clksel		= dpll_mpu_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_MPU,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk per_hs_clk_div_ck = {
+	.name		= "per_hs_clk_div_ck",
+	.parent		= &dpll_abe_m3_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel per_hsd_byp_clk_mux_sel[] = {
+	{ .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates },
+	{ .parent = &per_hs_clk_div_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk per_hsd_byp_clk_mux_ck = {
+	.name		= "per_hsd_byp_clk_mux_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.clksel		= per_hsd_byp_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_DPLL_PER,
+	.clksel_mask	= OMAP4430_DPLL_BYP_CLKSEL_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_PER */
+static struct dpll_data dpll_per_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_PER,
+	.clk_bypass	= &per_hsd_byp_clk_mux_ck,
+	.clk_ref	= &dpll_sys_ref_clk,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_PER,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_PER,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_PER,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_per_ck = {
+	.name		= "dpll_per_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.dpll_data	= &dpll_per_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_noncore_dpll_ops,
+	.recalc		= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dpll_per_m2_div[] = {
+	{ .parent = &dpll_per_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_per_m2_ck = {
+	.name		= "dpll_per_m2_ck",
+	.parent		= &dpll_per_ck,
+	.clksel		= dpll_per_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_PER,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_per_m2x2_ck = {
+	.name		= "dpll_per_m2x2_ck",
+	.parent		= &dpll_per_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_per_m3_ck = {
+	.name		= "dpll_per_m3_ck",
+	.parent		= &dpll_per_ck,
+	.clksel		= dpll_per_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_PER,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_per_m4_ck = {
+	.name		= "dpll_per_m4_ck",
+	.parent		= &dpll_per_ck,
+	.clksel		= dpll_per_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M4_DPLL_PER,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_per_m5_ck = {
+	.name		= "dpll_per_m5_ck",
+	.parent		= &dpll_per_ck,
+	.clksel		= dpll_per_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M5_DPLL_PER,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_per_m6_ck = {
+	.name		= "dpll_per_m6_ck",
+	.parent		= &dpll_per_ck,
+	.clksel		= dpll_per_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M6_DPLL_PER,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_per_m7_ck = {
+	.name		= "dpll_per_m7_ck",
+	.parent		= &dpll_per_ck,
+	.clksel		= dpll_per_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M7_DPLL_PER,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_UNIPRO */
+static struct dpll_data dpll_unipro_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_UNIPRO,
+	.clk_bypass	= &dpll_sys_ref_clk,
+	.clk_ref	= &dpll_sys_ref_clk,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_UNIPRO,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_UNIPRO,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_unipro_ck = {
+	.name		= "dpll_unipro_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.dpll_data	= &dpll_unipro_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_noncore_dpll_ops,
+	.recalc		= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dpll_unipro_m2x2_div[] = {
+	{ .parent = &dpll_unipro_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_unipro_m2x2_ck = {
+	.name		= "dpll_unipro_m2x2_ck",
+	.parent		= &dpll_unipro_ck,
+	.clksel		= dpll_unipro_m2x2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_UNIPRO,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk usb_hs_clk_div_ck = {
+	.name		= "usb_hs_clk_div_ck",
+	.parent		= &dpll_abe_m3_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_USB */
+static struct dpll_data dpll_usb_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_USB,
+	.clk_bypass	= &usb_hs_clk_div_ck,
+	.clk_ref	= &dpll_sys_ref_clk,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_USB,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_USB,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_USB,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_usb_ck = {
+	.name		= "dpll_usb_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.dpll_data	= &dpll_usb_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_noncore_dpll_ops,
+	.recalc		= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_usb_clkdcoldo_ck = {
+	.name		= "dpll_usb_clkdcoldo_ck",
+	.parent		= &dpll_usb_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dpll_usb_m2_div[] = {
+	{ .parent = &dpll_usb_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_usb_m2_ck = {
+	.name		= "dpll_usb_m2_ck",
+	.parent		= &dpll_usb_ck,
+	.clksel		= dpll_usb_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_USB,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel ducati_clk_mux_sel[] = {
+	{ .parent = &div_core_ck, .rates = div_1_0_rates },
+	{ .parent = &dpll_per_m6_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk ducati_clk_mux_ck = {
+	.name		= "ducati_clk_mux_ck",
+	.parent		= &div_core_ck,
+	.clksel		= ducati_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT,
+	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk func_12m_fclk = {
+	.name		= "func_12m_fclk",
+	.parent		= &dpll_per_m2x2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk func_24m_clk = {
+	.name		= "func_24m_clk",
+	.parent		= &dpll_per_m2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk func_24mc_fclk = {
+	.name		= "func_24mc_fclk",
+	.parent		= &dpll_per_m2x2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div2_4to8_rates[] = {
+	{ .div = 4, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 8, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel func_48m_fclk_div[] = {
+	{ .parent = &dpll_per_m2x2_ck, .rates = div2_4to8_rates },
+	{ .parent = NULL },
+};
+
+static struct clk func_48m_fclk = {
+	.name		= "func_48m_fclk",
+	.parent		= &dpll_per_m2x2_ck,
+	.clksel		= func_48m_fclk_div,
+	.clksel_reg	= OMAP4430_CM_SCALE_FCLK,
+	.clksel_mask	= OMAP4430_SCALE_FCLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk func_48mc_fclk = {
+	.name		= "func_48mc_fclk",
+	.parent		= &dpll_per_m2x2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div2_2to4_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 4, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel func_64m_fclk_div[] = {
+	{ .parent = &dpll_per_m4_ck, .rates = div2_2to4_rates },
+	{ .parent = NULL },
+};
+
+static struct clk func_64m_fclk = {
+	.name		= "func_64m_fclk",
+	.parent		= &dpll_per_m4_ck,
+	.clksel		= func_64m_fclk_div,
+	.clksel_reg	= OMAP4430_CM_SCALE_FCLK,
+	.clksel_mask	= OMAP4430_SCALE_FCLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel func_96m_fclk_div[] = {
+	{ .parent = &dpll_per_m2x2_ck, .rates = div2_2to4_rates },
+	{ .parent = NULL },
+};
+
+static struct clk func_96m_fclk = {
+	.name		= "func_96m_fclk",
+	.parent		= &dpll_per_m2x2_ck,
+	.clksel		= func_96m_fclk_div,
+	.clksel_reg	= OMAP4430_CM_SCALE_FCLK,
+	.clksel_mask	= OMAP4430_SCALE_FCLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel hsmmc6_fclk_sel[] = {
+	{ .parent = &func_64m_fclk, .rates = div_1_0_rates },
+	{ .parent = &func_96m_fclk, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk hsmmc6_fclk = {
+	.name		= "hsmmc6_fclk",
+	.parent		= &func_64m_fclk,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div2_1to8_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 8, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel init_60m_fclk_div[] = {
+	{ .parent = &dpll_usb_m2_ck, .rates = div2_1to8_rates },
+	{ .parent = NULL },
+};
+
+static struct clk init_60m_fclk = {
+	.name		= "init_60m_fclk",
+	.parent		= &dpll_usb_m2_ck,
+	.clksel		= init_60m_fclk_div,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_USB_60MHZ,
+	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel l3_div_div[] = {
+	{ .parent = &div_core_ck, .rates = div2_1to2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk l3_div_ck = {
+	.name		= "l3_div_ck",
+	.parent		= &div_core_ck,
+	.clksel		= l3_div_div,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_CORE,
+	.clksel_mask	= OMAP4430_CLKSEL_L3_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel l4_div_div[] = {
+	{ .parent = &l3_div_ck, .rates = div2_1to2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk l4_div_ck = {
+	.name		= "l4_div_ck",
+	.parent		= &l3_div_ck,
+	.clksel		= l4_div_div,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_CORE,
+	.clksel_mask	= OMAP4430_CLKSEL_L4_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk lp_clk_div_ck = {
+	.name		= "lp_clk_div_ck",
+	.parent		= &dpll_abe_m2x2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel l4_wkup_clk_mux_sel[] = {
+	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
+	{ .parent = &lp_clk_div_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk l4_wkup_clk_mux_ck = {
+	.name		= "l4_wkup_clk_mux_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= l4_wkup_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4_WKUP_CLKSEL,
+	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel per_abe_nc_fclk_div[] = {
+	{ .parent = &dpll_abe_m2_ck, .rates = div2_1to2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk per_abe_nc_fclk = {
+	.name		= "per_abe_nc_fclk",
+	.parent		= &dpll_abe_m2_ck,
+	.clksel		= per_abe_nc_fclk_div,
+	.clksel_reg	= OMAP4430_CM_SCALE_FCLK,
+	.clksel_mask	= OMAP4430_SCALE_FCLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel mcasp2_fclk_sel[] = {
+	{ .parent = &func_96m_fclk, .rates = div_1_0_rates },
+	{ .parent = &per_abe_nc_fclk, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk mcasp2_fclk = {
+	.name		= "mcasp2_fclk",
+	.parent		= &func_96m_fclk,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk mcasp3_fclk = {
+	.name		= "mcasp3_fclk",
+	.parent		= &func_96m_fclk,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk ocp_abe_iclk = {
+	.name		= "ocp_abe_iclk",
+	.parent		= &aess_fclk,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk per_abe_24m_fclk = {
+	.name		= "per_abe_24m_fclk",
+	.parent		= &dpll_abe_m2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel pmd_stm_clock_mux_sel[] = {
+	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
+	{ .parent = &dpll_core_m6_ck, .rates = div_1_1_rates },
+	{ .parent = &dpll_per_m7_ck, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pmd_stm_clock_mux_ck = {
+	.name		= "pmd_stm_clock_mux_ck",
+	.parent		= &sys_clkin_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk pmd_trace_clk_mux_ck = {
+	.name		= "pmd_trace_clk_mux_ck",
+	.parent		= &sys_clkin_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk syc_clk_div_ck = {
+	.name		= "syc_clk_div_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dpll_sys_ref_clk_div,
+	.clksel_reg	= OMAP4430_CM_ABE_DSS_SYS_CLKSEL,
+	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* Leaf clocks controlled by modules */
+
+static struct clk aes1_ck = {
+	.name		= "aes1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4SEC_AES1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_secure_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes2_ck = {
+	.name		= "aes2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4SEC_AES2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_secure_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aess_ck = {
+	.name		= "aess_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_AESS_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &aess_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cust_efuse_ck = {
+	.name		= "cust_efuse_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_cefuse_clkdm",
+	.parent		= &sys_clkin_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des3des_ck = {
+	.name		= "des3des_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4SEC_DES3DES_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_secure_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel dmic_sync_mux_sel[] = {
+	{ .parent = &abe_24m_fclk, .rates = div_1_0_rates },
+	{ .parent = &syc_clk_div_ck, .rates = div_1_1_rates },
+	{ .parent = &func_24m_clk, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dmic_sync_mux_ck = {
+	.name		= "dmic_sync_mux_ck",
+	.parent		= &abe_24m_fclk,
+	.clksel		= dmic_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_DMIC_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel func_dmic_abe_gfclk_sel[] = {
+	{ .parent = &dmic_sync_mux_ck, .rates = div_1_0_rates },
+	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
+	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+/* Merged func_dmic_abe_gfclk into dmic_ck */
+static struct clk dmic_ck = {
+	.name		= "dmic_ck",
+	.parent		= &dmic_sync_mux_ck,
+	.clksel		= func_dmic_abe_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_DMIC_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_DMIC_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+static struct clk dss_ck = {
+	.name		= "dss_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_DSS_DSS_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_dss_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ducati_ck = {
+	.name		= "ducati_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_DUCATI_DUCATI_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "ducati_clkdm",
+	.parent		= &ducati_clk_mux_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk emif1_ck = {
+	.name		= "emif1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_emif_clkdm",
+	.parent		= &ddrphy_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk emif2_ck = {
+	.name		= "emif2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_emif_clkdm",
+	.parent		= &ddrphy_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel fdif_fclk_div[] = {
+	{ .parent = &dpll_per_m4_ck, .rates = div3_1to4_rates },
+	{ .parent = NULL },
+};
+
+/* Merged fdif_fclk into fdif_ck */
+static struct clk fdif_ck = {
+	.name		= "fdif_ck",
+	.parent		= &dpll_per_m4_ck,
+	.clksel		= fdif_fclk_div,
+	.clksel_reg	= OMAP4430_CM_CAM_FDIF_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_FCLK_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_CAM_FDIF_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "iss_clkdm",
+};
+
+static const struct clksel per_sgx_fclk_div[] = {
+	{ .parent = &dpll_per_m2x2_ck, .rates = div3_1to4_rates },
+	{ .parent = NULL },
+};
+
+static struct clk per_sgx_fclk = {
+	.name		= "per_sgx_fclk",
+	.parent		= &dpll_per_m2x2_ck,
+	.clksel		= per_sgx_fclk_div,
+	.clksel_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_PER_192M_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel sgx_clk_mux_sel[] = {
+	{ .parent = &dpll_core_m7_ck, .rates = div_1_0_rates },
+	{ .parent = &per_sgx_fclk, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+/* Merged sgx_clk_mux into gfx_ck */
+static struct clk gfx_ck = {
+	.name		= "gfx_ck",
+	.parent		= &dpll_core_m7_ck,
+	.clksel		= sgx_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SGX_FCLK_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_gfx_clkdm",
+};
+
+static struct clk gpio1_ck = {
+	.name		= "gpio1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.parent		= &l4_wkup_clk_mux_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_ck = {
+	.name		= "gpio2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_ck = {
+	.name		= "gpio3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_ck = {
+	.name		= "gpio4_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_ck = {
+	.name		= "gpio5_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO5_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_ck = {
+	.name		= "gpio6_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO6_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_ck = {
+	.name		= "gpmc_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3_2_GPMC_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_2_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel dmt1_clk_mux_sel[] = {
+	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
+	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+/* Merged dmt1_clk_mux into gptimer1_ck */
+static struct clk gptimer1_ck = {
+	.name		= "gptimer1_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_wkup_clkdm",
+};
+
+/* Merged cm2_dm10_mux into gptimer10_ck */
+static struct clk gptimer10_ck = {
+	.name		= "gptimer10_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+/* Merged cm2_dm11_mux into gptimer11_ck */
+static struct clk gptimer11_ck = {
+	.name		= "gptimer11_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+/* Merged cm2_dm2_mux into gptimer2_ck */
+static struct clk gptimer2_ck = {
+	.name		= "gptimer2_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+/* Merged cm2_dm3_mux into gptimer3_ck */
+static struct clk gptimer3_ck = {
+	.name		= "gptimer3_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+/* Merged cm2_dm4_mux into gptimer4_ck */
+static struct clk gptimer4_ck = {
+	.name		= "gptimer4_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+static const struct clksel timer5_sync_mux_sel[] = {
+	{ .parent = &syc_clk_div_ck, .rates = div_1_0_rates },
+	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+/* Merged timer5_sync_mux into gptimer5_ck */
+static struct clk gptimer5_ck = {
+	.name		= "gptimer5_ck",
+	.parent		= &syc_clk_div_ck,
+	.clksel		= timer5_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+/* Merged timer6_sync_mux into gptimer6_ck */
+static struct clk gptimer6_ck = {
+	.name		= "gptimer6_ck",
+	.parent		= &syc_clk_div_ck,
+	.clksel		= timer5_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+/* Merged timer7_sync_mux into gptimer7_ck */
+static struct clk gptimer7_ck = {
+	.name		= "gptimer7_ck",
+	.parent		= &syc_clk_div_ck,
+	.clksel		= timer5_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+/* Merged timer8_sync_mux into gptimer8_ck */
+static struct clk gptimer8_ck = {
+	.name		= "gptimer8_ck",
+	.parent		= &syc_clk_div_ck,
+	.clksel		= timer5_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+/* Merged cm2_dm9_mux into gptimer9_ck */
+static struct clk gptimer9_ck = {
+	.name		= "gptimer9_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+static struct clk hdq1w_ck = {
+	.name		= "hdq1w_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_HDQ1W_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_12m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+/* Merged hsi_fclk into hsi_ck */
+static struct clk hsi_ck = {
+	.name		= "hsi_ck",
+	.parent		= &dpll_per_m2x2_ck,
+	.clksel		= per_sgx_fclk_div,
+	.clksel_reg	= OMAP4430_CM_L3INIT_HSI_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_24_25_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L3INIT_HSI_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+};
+
+static struct clk i2c1_ck = {
+	.name		= "i2c1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_I2C1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_96m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_ck = {
+	.name		= "i2c2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_I2C2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_96m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_ck = {
+	.name		= "i2c3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_I2C3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_96m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c4_ck = {
+	.name		= "i2c4_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_I2C4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_96m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk iss_ck = {
+	.name		= "iss_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_CAM_ISS_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "iss_clkdm",
+	.parent		= &ducati_clk_mux_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ivahd_ck = {
+	.name		= "ivahd_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_IVAHD_IVAHD_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "ivahd_clkdm",
+	.parent		= &dpll_iva_m5_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk keyboard_ck = {
+	.name		= "keyboard_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk l3_instr_interconnect_ck = {
+	.name		= "l3_instr_interconnect_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_instr_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk l3_interconnect_3_ck = {
+	.name		= "l3_interconnect_3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INSTR_L3_3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_instr_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcasp_sync_mux_ck = {
+	.name		= "mcasp_sync_mux_ck",
+	.parent		= &abe_24m_fclk,
+	.clksel		= dmic_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCASP_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel func_mcasp_abe_gfclk_sel[] = {
+	{ .parent = &mcasp_sync_mux_ck, .rates = div_1_0_rates },
+	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
+	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+/* Merged func_mcasp_abe_gfclk into mcasp_ck */
+static struct clk mcasp_ck = {
+	.name		= "mcasp_ck",
+	.parent		= &mcasp_sync_mux_ck,
+	.clksel		= func_mcasp_abe_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCASP_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_MCASP_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+static struct clk mcbsp1_sync_mux_ck = {
+	.name		= "mcbsp1_sync_mux_ck",
+	.parent		= &abe_24m_fclk,
+	.clksel		= dmic_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel func_mcbsp1_gfclk_sel[] = {
+	{ .parent = &mcbsp1_sync_mux_ck, .rates = div_1_0_rates },
+	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
+	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+/* Merged func_mcbsp1_gfclk into mcbsp1_ck */
+static struct clk mcbsp1_ck = {
+	.name		= "mcbsp1_ck",
+	.parent		= &mcbsp1_sync_mux_ck,
+	.clksel		= func_mcbsp1_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+static struct clk mcbsp2_sync_mux_ck = {
+	.name		= "mcbsp2_sync_mux_ck",
+	.parent		= &abe_24m_fclk,
+	.clksel		= dmic_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel func_mcbsp2_gfclk_sel[] = {
+	{ .parent = &mcbsp2_sync_mux_ck, .rates = div_1_0_rates },
+	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
+	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+/* Merged func_mcbsp2_gfclk into mcbsp2_ck */
+static struct clk mcbsp2_ck = {
+	.name		= "mcbsp2_ck",
+	.parent		= &mcbsp2_sync_mux_ck,
+	.clksel		= func_mcbsp2_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+static struct clk mcbsp3_sync_mux_ck = {
+	.name		= "mcbsp3_sync_mux_ck",
+	.parent		= &abe_24m_fclk,
+	.clksel		= dmic_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel func_mcbsp3_gfclk_sel[] = {
+	{ .parent = &mcbsp3_sync_mux_ck, .rates = div_1_0_rates },
+	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
+	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+/* Merged func_mcbsp3_gfclk into mcbsp3_ck */
+static struct clk mcbsp3_ck = {
+	.name		= "mcbsp3_ck",
+	.parent		= &mcbsp3_sync_mux_ck,
+	.clksel		= func_mcbsp3_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+static struct clk mcbsp4_sync_mux_ck = {
+	.name		= "mcbsp4_sync_mux_ck",
+	.parent		= &func_96m_fclk,
+	.clksel		= mcasp2_fclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel per_mcbsp4_gfclk_sel[] = {
+	{ .parent = &mcbsp4_sync_mux_ck, .rates = div_1_0_rates },
+	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+/* Merged per_mcbsp4_gfclk into mcbsp4_ck */
+static struct clk mcbsp4_ck = {
+	.name		= "mcbsp4_ck",
+	.parent		= &mcbsp4_sync_mux_ck,
+	.clksel		= per_mcbsp4_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_24_24_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+static struct clk mcspi1_ck = {
+	.name		= "mcspi1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MCSPI1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ck = {
+	.name		= "mcspi2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MCSPI2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_ck = {
+	.name		= "mcspi3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MCSPI3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_ck = {
+	.name		= "mcspi4_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MCSPI4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+/* Merged hsmmc1_fclk into mmc1_ck */
+static struct clk mmc1_ck = {
+	.name		= "mmc1_ck",
+	.parent		= &func_64m_fclk,
+	.clksel		= hsmmc6_fclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L3INIT_MMC1_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L3INIT_MMC1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+};
+
+/* Merged hsmmc2_fclk into mmc2_ck */
+static struct clk mmc2_ck = {
+	.name		= "mmc2_ck",
+	.parent		= &func_64m_fclk,
+	.clksel		= hsmmc6_fclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L3INIT_MMC2_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L3INIT_MMC2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+};
+
+static struct clk mmc3_ck = {
+	.name		= "mmc3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MMCSD3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc4_ck = {
+	.name		= "mmc4_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MMCSD4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc5_ck = {
+	.name		= "mmc5_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MMCSD5_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ocp_wp1_ck = {
+	.name		= "ocp_wp1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_instr_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pdm_ck = {
+	.name		= "pdm_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_PDM_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &pad_clks_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pkaeip29_ck = {
+	.name		= "pkaeip29_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_secure_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ck = {
+	.name		= "rng_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4SEC_RNG_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_secure_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha2md51_ck = {
+	.name		= "sha2md51_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_secure_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sl2_ck = {
+	.name		= "sl2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_IVAHD_SL2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "ivahd_clkdm",
+	.parent		= &dpll_iva_m5_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk slimbus1_ck = {
+	.name		= "slimbus1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &ocp_abe_iclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk slimbus2_ck = {
+	.name		= "slimbus2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sr_core_ck = {
+	.name		= "sr_core_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_ao_clkdm",
+	.parent		= &l4_wkup_clk_mux_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sr_iva_ck = {
+	.name		= "sr_iva_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_ao_clkdm",
+	.parent		= &l4_wkup_clk_mux_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sr_mpu_ck = {
+	.name		= "sr_mpu_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_ao_clkdm",
+	.parent		= &l4_wkup_clk_mux_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk tesla_ck = {
+	.name		= "tesla_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_TESLA_TESLA_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "tesla_clkdm",
+	.parent		= &dpll_iva_m4_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ck = {
+	.name		= "uart1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_UART1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ck = {
+	.name		= "uart2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_UART2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ck = {
+	.name		= "uart3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_UART3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart4_ck = {
+	.name		= "uart4_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_UART4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk unipro1_ck = {
+	.name		= "unipro1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &func_96m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_host_ck = {
+	.name		= "usb_host_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &init_60m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_host_fs_ck = {
+	.name		= "usb_host_fs_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &func_48mc_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_otg_ck = {
+	.name		= "usb_otg_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_tll_ck = {
+	.name		= "usb_tll_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbphyocp2scp_ck = {
+	.name		= "usbphyocp2scp_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usim_ck = {
+	.name		= "usim_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_WKUP_USIM_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_ck = {
+	.name		= "wdt2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_WKUP_WDT2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_ck = {
+	.name		= "wdt3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_WDT3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
+/* Remaining optional clocks */
+static const struct clksel otg_60m_gfclk_sel[] = {
+	{ .parent = &utmi_phy_clkout_ck, .rates = div_1_0_rates },
+	{ .parent = &xclk60motg_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk otg_60m_gfclk_ck = {
+	.name		= "otg_60m_gfclk_ck",
+	.parent		= &utmi_phy_clkout_ck,
+	.clksel		= otg_60m_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_60M_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel stm_clk_div_div[] = {
+	{ .parent = &pmd_stm_clock_mux_ck, .rates = div3_1to4_rates },
+	{ .parent = NULL },
+};
+
+static struct clk stm_clk_div_ck = {
+	.name		= "stm_clk_div_ck",
+	.parent		= &pmd_stm_clock_mux_ck,
+	.clksel		= stm_clk_div_div,
+	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_PMD_STM_CLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel trace_clk_div_div[] = {
+	{ .parent = &pmd_trace_clk_mux_ck, .rates = div3_1to4_rates },
+	{ .parent = NULL },
+};
+
+static struct clk trace_clk_div_ck = {
+	.name		= "trace_clk_div_ck",
+	.parent		= &pmd_trace_clk_mux_ck,
+	.clksel		= trace_clk_div_div,
+	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div2_14to18_rates[] = {
+	{ .div = 14, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 18, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel usim_fclk_div[] = {
+	{ .parent = &dpll_per_m4_ck, .rates = div2_14to18_rates },
+	{ .parent = NULL },
+};
+
+static struct clk usim_fclk = {
+	.name		= "usim_fclk",
+	.parent		= &dpll_per_m4_ck,
+	.clksel		= usim_fclk_div,
+	.clksel_reg	= OMAP4430_CM_WKUP_USIM_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel utmi_p1_gfclk_sel[] = {
+	{ .parent = &init_60m_fclk, .rates = div_1_0_rates },
+	{ .parent = &xclk60mhsp1_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk utmi_p1_gfclk_ck = {
+	.name		= "utmi_p1_gfclk_ck",
+	.parent		= &init_60m_fclk,
+	.clksel		= utmi_p1_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P1_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel utmi_p2_gfclk_sel[] = {
+	{ .parent = &init_60m_fclk, .rates = div_1_0_rates },
+	{ .parent = &xclk60mhsp2_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk utmi_p2_gfclk_ck = {
+	.name		= "utmi_p2_gfclk_ck",
+	.parent		= &init_60m_fclk,
+	.clksel		= utmi_p2_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P2_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/*
+ * clkdev
+ */
+
+static struct omap_clk omap44xx_clks[] = {
+	CLK(NULL,	"extalt_clkin_ck",		&extalt_clkin_ck,	CK_443X),
+	CLK(NULL,	"pad_clks_ck",			&pad_clks_ck,	CK_443X),
+	CLK(NULL,	"pad_slimbus_core_clks_ck",	&pad_slimbus_core_clks_ck,	CK_443X),
+	CLK(NULL,	"secure_32k_clk_src_ck",	&secure_32k_clk_src_ck,	CK_443X),
+	CLK(NULL,	"slimbus_clk",			&slimbus_clk,	CK_443X),
+	CLK(NULL,	"sys_32k_ck",			&sys_32k_ck,	CK_443X),
+	CLK(NULL,	"virt_12000000_ck",		&virt_12000000_ck,	CK_443X),
+	CLK(NULL,	"virt_13000000_ck",		&virt_13000000_ck,	CK_443X),
+	CLK(NULL,	"virt_16800000_ck",		&virt_16800000_ck,	CK_443X),
+	CLK(NULL,	"virt_19200000_ck",		&virt_19200000_ck,	CK_443X),
+	CLK(NULL,	"virt_26000000_ck",		&virt_26000000_ck,	CK_443X),
+	CLK(NULL,	"virt_27000000_ck",		&virt_27000000_ck,	CK_443X),
+	CLK(NULL,	"virt_38400000_ck",		&virt_38400000_ck,	CK_443X),
+	CLK(NULL,	"sys_clkin_ck",			&sys_clkin_ck,	CK_443X),
+	CLK(NULL,	"utmi_phy_clkout_ck",		&utmi_phy_clkout_ck,	CK_443X),
+	CLK(NULL,	"xclk60mhsp1_ck",		&xclk60mhsp1_ck,	CK_443X),
+	CLK(NULL,	"xclk60mhsp2_ck",		&xclk60mhsp2_ck,	CK_443X),
+	CLK(NULL,	"xclk60motg_ck",		&xclk60motg_ck,	CK_443X),
+	CLK(NULL,	"dpll_sys_ref_clk",		&dpll_sys_ref_clk,	CK_443X),
+	CLK(NULL,	"abe_dpll_refclk_mux_ck",	&abe_dpll_refclk_mux_ck,	CK_443X),
+	CLK(NULL,	"dpll_abe_ck",			&dpll_abe_ck,	CK_443X),
+	CLK(NULL,	"dpll_abe_m2x2_ck",		&dpll_abe_m2x2_ck,	CK_443X),
+	CLK(NULL,	"abe_24m_fclk",			&abe_24m_fclk,	CK_443X),
+	CLK(NULL,	"abe_clk",			&abe_clk,	CK_443X),
+	CLK(NULL,	"aess_fclk",			&aess_fclk,	CK_443X),
+	CLK(NULL,	"dpll_abe_m3_ck",		&dpll_abe_m3_ck,	CK_443X),
+	CLK(NULL,	"core_hsd_byp_clk_mux_ck",	&core_hsd_byp_clk_mux_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_ck",			&dpll_core_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m6_ck",		&dpll_core_m6_ck,	CK_443X),
+	CLK(NULL,	"dbgclk_mux_ck",		&dbgclk_mux_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m2_ck",		&dpll_core_m2_ck,	CK_443X),
+	CLK(NULL,	"ddrphy_ck",			&ddrphy_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m5_ck",		&dpll_core_m5_ck,	CK_443X),
+	CLK(NULL,	"div_core_ck",			&div_core_ck,	CK_443X),
+	CLK(NULL,	"div_iva_hs_clk",		&div_iva_hs_clk,	CK_443X),
+	CLK(NULL,	"div_mpu_hs_clk",		&div_mpu_hs_clk,	CK_443X),
+	CLK(NULL,	"dpll_core_m4_ck",		&dpll_core_m4_ck,	CK_443X),
+	CLK(NULL,	"dll_clk_div_ck",		&dll_clk_div_ck,	CK_443X),
+	CLK(NULL,	"dpll_abe_m2_ck",		&dpll_abe_m2_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m3_ck",		&dpll_core_m3_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m7_ck",		&dpll_core_m7_ck,	CK_443X),
+	CLK(NULL,	"iva_hsd_byp_clk_mux_ck",	&iva_hsd_byp_clk_mux_ck,	CK_443X),
+	CLK(NULL,	"dpll_iva_ck",			&dpll_iva_ck,	CK_443X),
+	CLK(NULL,	"dpll_iva_m4_ck",		&dpll_iva_m4_ck,	CK_443X),
+	CLK(NULL,	"dpll_iva_m5_ck",		&dpll_iva_m5_ck,	CK_443X),
+	CLK(NULL,	"dpll_mpu_ck",			&dpll_mpu_ck,	CK_443X),
+	CLK(NULL,	"dpll_mpu_m2_ck",		&dpll_mpu_m2_ck,	CK_443X),
+	CLK(NULL,	"per_hs_clk_div_ck",		&per_hs_clk_div_ck,	CK_443X),
+	CLK(NULL,	"per_hsd_byp_clk_mux_ck",	&per_hsd_byp_clk_mux_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_ck",			&dpll_per_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m2_ck",		&dpll_per_m2_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m2x2_ck",		&dpll_per_m2x2_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m3_ck",		&dpll_per_m3_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m4_ck",		&dpll_per_m4_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m5_ck",		&dpll_per_m5_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m6_ck",		&dpll_per_m6_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m7_ck",		&dpll_per_m7_ck,	CK_443X),
+	CLK(NULL,	"dpll_unipro_ck",		&dpll_unipro_ck,	CK_443X),
+	CLK(NULL,	"dpll_unipro_m2x2_ck",		&dpll_unipro_m2x2_ck,	CK_443X),
+	CLK(NULL,	"usb_hs_clk_div_ck",		&usb_hs_clk_div_ck,	CK_443X),
+	CLK(NULL,	"dpll_usb_ck",			&dpll_usb_ck,	CK_443X),
+	CLK(NULL,	"dpll_usb_clkdcoldo_ck",	&dpll_usb_clkdcoldo_ck,	CK_443X),
+	CLK(NULL,	"dpll_usb_m2_ck",		&dpll_usb_m2_ck,	CK_443X),
+	CLK(NULL,	"ducati_clk_mux_ck",		&ducati_clk_mux_ck,	CK_443X),
+	CLK(NULL,	"func_12m_fclk",		&func_12m_fclk,	CK_443X),
+	CLK(NULL,	"func_24m_clk",			&func_24m_clk,	CK_443X),
+	CLK(NULL,	"func_24mc_fclk",		&func_24mc_fclk,	CK_443X),
+	CLK(NULL,	"func_48m_fclk",		&func_48m_fclk,	CK_443X),
+	CLK(NULL,	"func_48mc_fclk",		&func_48mc_fclk,	CK_443X),
+	CLK(NULL,	"func_64m_fclk",		&func_64m_fclk,	CK_443X),
+	CLK(NULL,	"func_96m_fclk",		&func_96m_fclk,	CK_443X),
+	CLK(NULL,	"hsmmc6_fclk",			&hsmmc6_fclk,	CK_443X),
+	CLK(NULL,	"init_60m_fclk",		&init_60m_fclk,	CK_443X),
+	CLK(NULL,	"l3_div_ck",			&l3_div_ck,	CK_443X),
+	CLK(NULL,	"l4_div_ck",			&l4_div_ck,	CK_443X),
+	CLK(NULL,	"lp_clk_div_ck",		&lp_clk_div_ck,	CK_443X),
+	CLK(NULL,	"l4_wkup_clk_mux_ck",		&l4_wkup_clk_mux_ck,	CK_443X),
+	CLK(NULL,	"per_abe_nc_fclk",		&per_abe_nc_fclk,	CK_443X),
+	CLK(NULL,	"mcasp2_fclk",			&mcasp2_fclk,	CK_443X),
+	CLK(NULL,	"mcasp3_fclk",			&mcasp3_fclk,	CK_443X),
+	CLK(NULL,	"ocp_abe_iclk",			&ocp_abe_iclk,	CK_443X),
+	CLK(NULL,	"per_abe_24m_fclk",		&per_abe_24m_fclk,	CK_443X),
+	CLK(NULL,	"pmd_stm_clock_mux_ck",		&pmd_stm_clock_mux_ck,	CK_443X),
+	CLK(NULL,	"pmd_trace_clk_mux_ck",		&pmd_trace_clk_mux_ck,	CK_443X),
+	CLK(NULL,	"syc_clk_div_ck",		&syc_clk_div_ck,	CK_443X),
+	CLK(NULL,	"aes1_ck",			&aes1_ck,	CK_443X),
+	CLK(NULL,	"aes2_ck",			&aes2_ck,	CK_443X),
+	CLK(NULL,	"aess_ck",			&aess_ck,	CK_443X),
+	CLK(NULL,	"cust_efuse_ck",		&cust_efuse_ck,	CK_443X),
+	CLK(NULL,	"des3des_ck",			&des3des_ck,	CK_443X),
+	CLK(NULL,	"dmic_sync_mux_ck",		&dmic_sync_mux_ck,	CK_443X),
+	CLK(NULL,	"dmic_ck",			&dmic_ck,	CK_443X),
+	CLK(NULL,	"dss_ck",			&dss_ck,	CK_443X),
+	CLK(NULL,	"ducati_ck",			&ducati_ck,	CK_443X),
+	CLK(NULL,	"emif1_ck",			&emif1_ck,	CK_443X),
+	CLK(NULL,	"emif2_ck",			&emif2_ck,	CK_443X),
+	CLK(NULL,	"fdif_ck",			&fdif_ck,	CK_443X),
+	CLK(NULL,	"per_sgx_fclk",			&per_sgx_fclk,	CK_443X),
+	CLK(NULL,	"gfx_ck",			&gfx_ck,	CK_443X),
+	CLK(NULL,	"gpio1_ck",			&gpio1_ck,	CK_443X),
+	CLK(NULL,	"gpio2_ck",			&gpio2_ck,	CK_443X),
+	CLK(NULL,	"gpio3_ck",			&gpio3_ck,	CK_443X),
+	CLK(NULL,	"gpio4_ck",			&gpio4_ck,	CK_443X),
+	CLK(NULL,	"gpio5_ck",			&gpio5_ck,	CK_443X),
+	CLK(NULL,	"gpio6_ck",			&gpio6_ck,	CK_443X),
+	CLK(NULL,	"gpmc_ck",			&gpmc_ck,	CK_443X),
+	CLK(NULL,	"gptimer1_ck",			&gptimer1_ck,	CK_443X),
+	CLK(NULL,	"gptimer10_ck",			&gptimer10_ck,	CK_443X),
+	CLK(NULL,	"gptimer11_ck",			&gptimer11_ck,	CK_443X),
+	CLK(NULL,	"gptimer2_ck",			&gptimer2_ck,	CK_443X),
+	CLK(NULL,	"gptimer3_ck",			&gptimer3_ck,	CK_443X),
+	CLK(NULL,	"gptimer4_ck",			&gptimer4_ck,	CK_443X),
+	CLK(NULL,	"gptimer5_ck",			&gptimer5_ck,	CK_443X),
+	CLK(NULL,	"gptimer6_ck",			&gptimer6_ck,	CK_443X),
+	CLK(NULL,	"gptimer7_ck",			&gptimer7_ck,	CK_443X),
+	CLK(NULL,	"gptimer8_ck",			&gptimer8_ck,	CK_443X),
+	CLK(NULL,	"gptimer9_ck",			&gptimer9_ck,	CK_443X),
+	CLK("omap2_hdq.0",	"ick",				&hdq1w_ck,	CK_443X),
+	CLK(NULL,	"hsi_ck",			&hsi_ck,	CK_443X),
+	CLK("i2c_omap.1",	"ick",				&i2c1_ck,	CK_443X),
+	CLK("i2c_omap.2",	"ick",				&i2c2_ck,	CK_443X),
+	CLK("i2c_omap.3",	"ick",				&i2c3_ck,	CK_443X),
+	CLK("i2c_omap.4",	"ick",				&i2c4_ck,	CK_443X),
+	CLK(NULL,	"iss_ck",			&iss_ck,	CK_443X),
+	CLK(NULL,	"ivahd_ck",			&ivahd_ck,	CK_443X),
+	CLK(NULL,	"keyboard_ck",			&keyboard_ck,	CK_443X),
+	CLK(NULL,	"l3_instr_interconnect_ck",	&l3_instr_interconnect_ck,	CK_443X),
+	CLK(NULL,	"l3_interconnect_3_ck",		&l3_interconnect_3_ck,	CK_443X),
+	CLK(NULL,	"mcasp_sync_mux_ck",		&mcasp_sync_mux_ck,	CK_443X),
+	CLK(NULL,	"mcasp_ck",			&mcasp_ck,	CK_443X),
+	CLK(NULL,	"mcbsp1_sync_mux_ck",		&mcbsp1_sync_mux_ck,	CK_443X),
+	CLK("omap-mcbsp.1",	"fck",				&mcbsp1_ck,	CK_443X),
+	CLK(NULL,	"mcbsp2_sync_mux_ck",		&mcbsp2_sync_mux_ck,	CK_443X),
+	CLK("omap-mcbsp.2",	"fck",				&mcbsp2_ck,	CK_443X),
+	CLK(NULL,	"mcbsp3_sync_mux_ck",		&mcbsp3_sync_mux_ck,	CK_443X),
+	CLK("omap-mcbsp.3",	"fck",				&mcbsp3_ck,	CK_443X),
+	CLK(NULL,	"mcbsp4_sync_mux_ck",		&mcbsp4_sync_mux_ck,	CK_443X),
+	CLK("omap-mcbsp.4",	"fck",				&mcbsp4_ck,	CK_443X),
+	CLK("omap2_mcspi.1",	"fck",				&mcspi1_ck,	CK_443X),
+	CLK("omap2_mcspi.2",	"fck",				&mcspi2_ck,	CK_443X),
+	CLK("omap2_mcspi.3",	"fck",				&mcspi3_ck,	CK_443X),
+	CLK("omap2_mcspi.4",	"fck",				&mcspi4_ck,	CK_443X),
+	CLK("mmci-omap-hs.0",	"fck",				&mmc1_ck,	CK_443X),
+	CLK("mmci-omap-hs.1",	"fck",				&mmc2_ck,	CK_443X),
+	CLK("mmci-omap-hs.2",	"fck",				&mmc3_ck,	CK_443X),
+	CLK("mmci-omap-hs.3",	"fck",				&mmc4_ck,	CK_443X),
+	CLK("mmci-omap-hs.4",	"fck",				&mmc5_ck,	CK_443X),
+	CLK(NULL,	"ocp_wp1_ck",			&ocp_wp1_ck,	CK_443X),
+	CLK(NULL,	"pdm_ck",			&pdm_ck,	CK_443X),
+	CLK(NULL,	"pkaeip29_ck",			&pkaeip29_ck,	CK_443X),
+	CLK("omap_rng",	"ick",				&rng_ck,	CK_443X),
+	CLK(NULL,	"sha2md51_ck",			&sha2md51_ck,	CK_443X),
+	CLK(NULL,	"sl2_ck",			&sl2_ck,	CK_443X),
+	CLK(NULL,	"slimbus1_ck",			&slimbus1_ck,	CK_443X),
+	CLK(NULL,	"slimbus2_ck",			&slimbus2_ck,	CK_443X),
+	CLK(NULL,	"sr_core_ck",			&sr_core_ck,	CK_443X),
+	CLK(NULL,	"sr_iva_ck",			&sr_iva_ck,	CK_443X),
+	CLK(NULL,	"sr_mpu_ck",			&sr_mpu_ck,	CK_443X),
+	CLK(NULL,	"tesla_ck",			&tesla_ck,	CK_443X),
+	CLK(NULL,	"uart1_ck",			&uart1_ck,	CK_443X),
+	CLK(NULL,	"uart2_ck",			&uart2_ck,	CK_443X),
+	CLK(NULL,	"uart3_ck",			&uart3_ck,	CK_443X),
+	CLK(NULL,	"uart4_ck",			&uart4_ck,	CK_443X),
+	CLK(NULL,	"unipro1_ck",			&unipro1_ck,	CK_443X),
+	CLK(NULL,	"usb_host_ck",			&usb_host_ck,	CK_443X),
+	CLK(NULL,	"usb_host_fs_ck",		&usb_host_fs_ck,	CK_443X),
+	CLK("musb_hdrc",	"ick",				&usb_otg_ck,	CK_443X),
+	CLK(NULL,	"usb_tll_ck",			&usb_tll_ck,	CK_443X),
+	CLK(NULL,	"usbphyocp2scp_ck",		&usbphyocp2scp_ck,	CK_443X),
+	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
+	CLK("omap_wdt",	"fck",				&wdt2_ck,	CK_443X),
+	CLK(NULL,	"wdt3_ck",			&wdt3_ck,	CK_443X),
+	CLK(NULL,	"otg_60m_gfclk_ck",		&otg_60m_gfclk_ck,	CK_443X),
+	CLK(NULL,	"stm_clk_div_ck",		&stm_clk_div_ck,	CK_443X),
+	CLK(NULL,	"trace_clk_div_ck",		&trace_clk_div_ck,	CK_443X),
+	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
+	CLK(NULL,	"utmi_p1_gfclk_ck",		&utmi_p1_gfclk_ck,	CK_443X),
+	CLK(NULL,	"utmi_p2_gfclk_ck",		&utmi_p2_gfclk_ck,	CK_443X),
+};
+
+int __init omap2_clk_init(void)
+{
+	/* struct prcm_config *prcm; */
+	struct omap_clk *c;
+	/* u32 clkrate; */
+	u32 cpu_clkflg;
+
+	if (cpu_is_omap44xx()) {
+		cpu_mask = RATE_IN_4430;
+		cpu_clkflg = CK_443X;
+	}
+
+	clk_init(&omap2_clk_functions);
+
+	for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
+									  c++)
+		clk_preinit(c->lk.clk);
+
+	for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
+									  c++)
+		if (c->cpu & cpu_clkflg) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
+			/* TODO
+			omap2_init_clk_clkdm(c->lk.clk);
+			*/
+		}
+
+	recalculate_root_clocks();
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c
new file mode 100644
index 000000000000..f69096b88cdb
--- /dev/null
+++ b/arch/arm/mach-omap2/clock_common_data.c
@@ -0,0 +1,39 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock_common_data.c
+ *
+ *  Copyright (C) 2005-2009 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2009 Nokia Corporation
+ *
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains clock data that is common to both the OMAP2xxx and
+ * OMAP3xxx clock definition files.
+ */
+
+#include "clock.h"
+
+/* clksel_rate data common to 24xx/343x */
+const struct clksel_rate gpt_32k_rates[] = {
+	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 0 }
+};
+
+const struct clksel_rate gpt_sys_rates[] = {
+	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 0 }
+};
+
+const struct clksel_rate gfx_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 0 }
+};
+
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 58aff8485df9..1a45ed1e8ba1 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -2,7 +2,7 @@
  * OMAP2/3 clockdomain framework functions
  *
  * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2008-2009 Nokia Corporation
  *
  * Written by Paul Walmsley and Jouni Högander
  *
@@ -10,9 +10,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifdef CONFIG_OMAP_DEBUG_CLOCKDOMAIN
-#  define DEBUG
-#endif
+#undef DEBUG
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -28,14 +26,14 @@
 
 #include <linux/bitops.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "cm.h"
 
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 /* clkdm_list contains all registered struct clockdomains */
 static LIST_HEAD(clkdm_list);
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index fe319ae4ca0a..c4ee0761d908 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -10,7 +10,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
 
-#include <mach/clockdomain.h>
+#include <plat/clockdomain.h>
 
 /*
  * OMAP2/3-common clockdomains
diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h
new file mode 100644
index 000000000000..0e67f75aa35c
--- /dev/null
+++ b/arch/arm/mach-omap2/cm-regbits-44xx.h
@@ -0,0 +1,1474 @@
+/*
+ * OMAP44xx Clock Management register bits
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
+
+#include "cm.h"
+
+
+/* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
+#define OMAP4430_ABE_DYNDEP_SHIFT				(1 << 3)
+#define OMAP4430_ABE_DYNDEP_MASK				BITFIELD(3, 3)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP,
+ * CM_TESLA_STATICDEP
+ */
+#define OMAP4430_ABE_STATDEP_SHIFT				(1 << 3)
+#define OMAP4430_ABE_STATDEP_MASK				BITFIELD(3, 3)
+
+/* Used by CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_ALWONCORE_DYNDEP_SHIFT				(1 << 16)
+#define OMAP4430_ALWONCORE_DYNDEP_MASK				BITFIELD(16, 16)
+
+/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
+#define OMAP4430_ALWONCORE_STATDEP_SHIFT			(1 << 16)
+#define OMAP4430_ALWONCORE_STATDEP_MASK				BITFIELD(16, 16)
+
+/*
+ * Used by CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB,
+ * CM_AUTOIDLE_DPLL_CORE_RESTORE, CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE,
+ * CM_AUTOIDLE_DPLL_DDRPHY, CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU
+ */
+#define OMAP4430_AUTO_DPLL_MODE_SHIFT				(1 << 0)
+#define OMAP4430_AUTO_DPLL_MODE_MASK				BITFIELD(0, 2)
+
+/* Used by CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_CEFUSE_DYNDEP_SHIFT				(1 << 17)
+#define OMAP4430_CEFUSE_DYNDEP_MASK				BITFIELD(17, 17)
+
+/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
+#define OMAP4430_CEFUSE_STATDEP_SHIFT				(1 << 17)
+#define OMAP4430_CEFUSE_STATDEP_MASK				BITFIELD(17, 17)
+
+/* Used by CM1_ABE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT		(1 << 13)
+#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK			BITFIELD(13, 13)
+
+/* Used by CM1_ABE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT		(1 << 12)
+#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK		BITFIELD(12, 12)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM1_ABE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT			(1 << 11)
+#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK			BITFIELD(11, 11)
+
+/* Used by CM1_ABE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK			BITFIELD(11, 11)
+
+/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT		(1 << 12)
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK		BITFIELD(12, 12)
+
+/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT		(1 << 13)
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK		BITFIELD(13, 13)
+
+/* Used by CM_CAM_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK		BITFIELD(9, 9)
+
+/* Used by CM_EMU_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK		BITFIELD(9, 9)
+
+/* Used by CM_CEFUSE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK		BITFIELD(9, 9)
+
+/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT			(1 << 10)
+#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT			(1 << 11)
+#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK			BITFIELD(11, 11)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT			(1 << 12)
+#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK			BITFIELD(12, 12)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT			(1 << 13)
+#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK			BITFIELD(13, 13)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT			(1 << 14)
+#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK			BITFIELD(14, 14)
+
+/* Used by CM_DSS_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK		BITFIELD(10, 10)
+
+/* Used by CM_DSS_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_DUCATI_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_MASK		BITFIELD(10, 10)
+
+/* Used by CM_EMU_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_CAM_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT			(1 << 10)
+#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT		(1 << 15)
+#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK		BITFIELD(15, 15)
+
+/* Used by CM1_ABE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK		BITFIELD(10, 10)
+
+/* Used by CM_DSS_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK		BITFIELD(11, 11)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT		(1 << 20)
+#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK		BITFIELD(20, 20)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT		(1 << 26)
+#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK			BITFIELD(26, 26)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT		(1 << 21)
+#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK		BITFIELD(21, 21)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT		(1 << 27)
+#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK			BITFIELD(27, 27)
+
+/* Used by CM_L3INIT_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_SHIFT		(1 << 31)
+#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_MASK		BITFIELD(31, 31)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT		(1 << 13)
+#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK		BITFIELD(13, 13)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT		(1 << 12)
+#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK		BITFIELD(12, 12)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT		(1 << 28)
+#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK		BITFIELD(28, 28)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT		(1 << 29)
+#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK		BITFIELD(29, 29)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK		BITFIELD(11, 11)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT		(1 << 16)
+#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK		BITFIELD(16, 16)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT		(1 << 17)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK		BITFIELD(17, 17)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT		(1 << 18)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK		BITFIELD(18, 18)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT		(1 << 19)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK		BITFIELD(19, 19)
+
+/* Used by CM_CAM_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_IVAHD_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK		BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_SHIFT	(1 << 14)
+#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_MASK		BITFIELD(14, 14)
+
+/* Used by CM_L3_1_CLKSTCTRL, CM_L3_1_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3_2_CLKSTCTRL, CM_L3_2_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_D2D_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_SDMA_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_DSS_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_GFX_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INSTR_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK		BITFIELD(8, 8)
+
+/* Used by CM_L4SEC_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK		BITFIELD(8, 8)
+
+/* Used by CM_ALWON_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_CEFUSE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		BITFIELD(8, 8)
+
+/* Used by CM_L4CFG_CLKSTCTRL, CM_L4CFG_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_D2D_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L4SEC_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK		BITFIELD(9, 9)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT		(1 << 12)
+#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK			BITFIELD(12, 12)
+
+/* Used by CM_MPU_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM1_ABE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT		(1 << 16)
+#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK		BITFIELD(16, 16)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT		(1 << 17)
+#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK			BITFIELD(17, 17)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT		(1 << 18)
+#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK			BITFIELD(18, 18)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT		(1 << 19)
+#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK			BITFIELD(19, 19)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT		(1 << 25)
+#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK		BITFIELD(25, 25)
+
+/* Used by CM_EMU_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_MASK		BITFIELD(10, 10)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT		(1 << 20)
+#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK		BITFIELD(20, 20)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT		(1 << 21)
+#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK		BITFIELD(21, 21)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT		(1 << 22)
+#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK		BITFIELD(22, 22)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT		(1 << 24)
+#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK			BITFIELD(24, 24)
+
+/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT			(1 << 10)
+#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_GFX_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_ALWON_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK		BITFIELD(11, 11)
+
+/* Used by CM_ALWON_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_ALWON_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_TESLA_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK		BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT		(1 << 22)
+#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK			BITFIELD(22, 22)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT		(1 << 23)
+#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK			BITFIELD(23, 23)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT		(1 << 24)
+#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK			BITFIELD(24, 24)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT		(1 << 15)
+#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK		BITFIELD(15, 15)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT			(1 << 10)
+#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT		(1 << 30)
+#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK			BITFIELD(30, 30)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT		(1 << 25)
+#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK		BITFIELD(25, 25)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK		BITFIELD(11, 11)
+
+/*
+ * Used by CM_WKUP_TIMER1_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
+ * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
+ * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
+ * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL,
+ * CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL,
+ * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
+ * CM1_ABE_TIMER8_CLKCTRL
+ */
+#define OMAP4430_CLKSEL_SHIFT					(1 << 24)
+#define OMAP4430_CLKSEL_MASK					BITFIELD(24, 24)
+
+/*
+ * Renamed from CLKSEL Used by CM_ABE_DSS_SYS_CLKSEL, CM_ABE_PLL_REF_CLKSEL,
+ * CM_DPLL_SYS_REF_CLKSEL, CM_L4_WKUP_CLKSEL, CM_CLKSEL_DUCATI_ISS_ROOT,
+ * CM_CLKSEL_USB_60MHZ
+ */
+#define OMAP4430_CLKSEL_0_0_SHIFT				(1 << 0)
+#define OMAP4430_CLKSEL_0_0_MASK				BITFIELD(0, 0)
+
+/* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */
+#define OMAP4430_CLKSEL_0_1_SHIFT				(1 << 0)
+#define OMAP4430_CLKSEL_0_1_MASK				BITFIELD(0, 1)
+
+/* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */
+#define OMAP4430_CLKSEL_24_25_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_24_25_MASK				BITFIELD(24, 25)
+
+/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
+#define OMAP4430_CLKSEL_60M_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_60M_MASK				BITFIELD(24, 24)
+
+/* Used by CM1_ABE_AESS_CLKCTRL */
+#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_AESS_FCLK_MASK				BITFIELD(24, 24)
+
+/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
+#define OMAP4430_CLKSEL_CORE_SHIFT				(1 << 0)
+#define OMAP4430_CLKSEL_CORE_MASK				BITFIELD(0, 0)
+
+/* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */
+#define OMAP4430_CLKSEL_CORE_1_1_SHIFT				(1 << 1)
+#define OMAP4430_CLKSEL_CORE_1_1_MASK				BITFIELD(1, 1)
+
+/* Used by CM_WKUP_USIM_CLKCTRL */
+#define OMAP4430_CLKSEL_DIV_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_DIV_MASK				BITFIELD(24, 24)
+
+/* Used by CM_CAM_FDIF_CLKCTRL */
+#define OMAP4430_CLKSEL_FCLK_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_FCLK_MASK				BITFIELD(24, 25)
+
+/* Used by CM_L4PER_MCBSP4_CLKCTRL */
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT			(1 << 25)
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK			BITFIELD(25, 25)
+
+/*
+ * Renamed from CLKSEL_INTERNAL_SOURCE Used by CM1_ABE_DMIC_CLKCTRL,
+ * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
+ * CM1_ABE_MCBSP3_CLKCTRL
+ */
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT	(1 << 26)
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK	BITFIELD(26, 27)
+
+/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
+#define OMAP4430_CLKSEL_L3_SHIFT				(1 << 4)
+#define OMAP4430_CLKSEL_L3_MASK					BITFIELD(4, 4)
+
+/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */
+#define OMAP4430_CLKSEL_L3_SHADOW_SHIFT				(1 << 2)
+#define OMAP4430_CLKSEL_L3_SHADOW_MASK				BITFIELD(2, 2)
+
+/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
+#define OMAP4430_CLKSEL_L4_SHIFT				(1 << 8)
+#define OMAP4430_CLKSEL_L4_MASK					BITFIELD(8, 8)
+
+/* Used by CM_CLKSEL_ABE */
+#define OMAP4430_CLKSEL_OPP_SHIFT				(1 << 0)
+#define OMAP4430_CLKSEL_OPP_MASK				BITFIELD(0, 1)
+
+/* Used by CM_GFX_GFX_CLKCTRL */
+#define OMAP4430_CLKSEL_PER_192M_SHIFT				(1 << 25)
+#define OMAP4430_CLKSEL_PER_192M_MASK				BITFIELD(25, 26)
+
+/* Used by CM_EMU_DEBUGSS_CLKCTRL */
+#define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT			(1 << 27)
+#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK			BITFIELD(27, 29)
+
+/* Used by CM_EMU_DEBUGSS_CLKCTRL */
+#define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT			(1 << 24)
+#define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK			BITFIELD(24, 26)
+
+/* Used by CM_GFX_GFX_CLKCTRL */
+#define OMAP4430_CLKSEL_SGX_FCLK_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_SGX_FCLK_MASK				BITFIELD(24, 24)
+
+/*
+ * Used by CM1_ABE_DMIC_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL,
+ * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL
+ */
+#define OMAP4430_CLKSEL_SOURCE_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_SOURCE_MASK				BITFIELD(24, 25)
+
+/* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */
+#define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT			(1 << 24)
+#define OMAP4430_CLKSEL_SOURCE_24_24_MASK			BITFIELD(24, 24)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_CLKSEL_UTMI_P1_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_UTMI_P1_MASK				BITFIELD(24, 24)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_CLKSEL_UTMI_P2_SHIFT				(1 << 25)
+#define OMAP4430_CLKSEL_UTMI_P2_MASK				BITFIELD(25, 25)
+
+/*
+ * Used by CM_WKUP_CLKSTCTRL, CM_EMU_CLKSTCTRL, CM_D2D_CLKSTCTRL,
+ * CM_DUCATI_CLKSTCTRL, CM_L3INSTR_CLKSTCTRL, CM_L3_1_CLKSTCTRL,
+ * CM_L3_2_CLKSTCTRL, CM_L4CFG_CLKSTCTRL, CM_MEMIF_CLKSTCTRL,
+ * CM_SDMA_CLKSTCTRL, CM_GFX_CLKSTCTRL, CM_L4PER_CLKSTCTRL, CM_L4SEC_CLKSTCTRL,
+ * CM_L3INIT_CLKSTCTRL, CM_CAM_CLKSTCTRL, CM_CEFUSE_CLKSTCTRL,
+ * CM_L3INIT_CLKSTCTRL_RESTORE, CM_L3_1_CLKSTCTRL_RESTORE,
+ * CM_L3_2_CLKSTCTRL_RESTORE, CM_L4CFG_CLKSTCTRL_RESTORE,
+ * CM_L4PER_CLKSTCTRL_RESTORE, CM_MEMIF_CLKSTCTRL_RESTORE, CM_ALWON_CLKSTCTRL,
+ * CM_IVAHD_CLKSTCTRL, CM_DSS_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_TESLA_CLKSTCTRL,
+ * CM1_ABE_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE
+ */
+#define OMAP4430_CLKTRCTRL_SHIFT				(1 << 0)
+#define OMAP4430_CLKTRCTRL_MASK					BITFIELD(0, 1)
+
+/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
+#define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT			(1 << 0)
+#define OMAP4430_CORE_DPLL_EMU_DIV_MASK				BITFIELD(0, 6)
+
+/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
+#define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT			(1 << 8)
+#define OMAP4430_CORE_DPLL_EMU_MULT_MASK			BITFIELD(8, 18)
+
+/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_D2D_DYNDEP_SHIFT				(1 << 18)
+#define OMAP4430_D2D_DYNDEP_MASK				BITFIELD(18, 18)
+
+/* Used by CM_MPU_STATICDEP */
+#define OMAP4430_D2D_STATDEP_SHIFT				(1 << 18)
+#define OMAP4430_D2D_STATDEP_MASK				BITFIELD(18, 18)
+
+/*
+ * Used by CM_SSC_DELTAMSTEP_DPLL_PER, CM_SSC_DELTAMSTEP_DPLL_UNIPRO,
+ * CM_SSC_DELTAMSTEP_DPLL_USB, CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE,
+ * CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE,
+ * CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA,
+ * CM_SSC_DELTAMSTEP_DPLL_MPU
+ */
+#define OMAP4430_DELTAMSTEP_SHIFT				(1 << 0)
+#define OMAP4430_DELTAMSTEP_MASK				BITFIELD(0, 19)
+
+/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+#define OMAP4430_DLL_OVERRIDE_SHIFT				(1 << 2)
+#define OMAP4430_DLL_OVERRIDE_MASK				BITFIELD(2, 2)
+
+/* Renamed from DLL_OVERRIDE Used by CM_DLL_CTRL */
+#define OMAP4430_DLL_OVERRIDE_0_0_SHIFT				(1 << 0)
+#define OMAP4430_DLL_OVERRIDE_0_0_MASK				BITFIELD(0, 0)
+
+/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+#define OMAP4430_DLL_RESET_SHIFT				(1 << 3)
+#define OMAP4430_DLL_RESET_MASK					BITFIELD(3, 3)
+
+/*
+ * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB,
+ * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
+ * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
+ */
+#define OMAP4430_DPLL_BYP_CLKSEL_SHIFT				(1 << 23)
+#define OMAP4430_DPLL_BYP_CLKSEL_MASK				BITFIELD(23, 23)
+
+/* Used by CM_CLKDCOLDO_DPLL_USB */
+#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK			BITFIELD(8, 8)
+
+/* Used by CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_CORE */
+#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT			(1 << 20)
+#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK			BITFIELD(20, 20)
+
+/*
+ * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
+ * CM_DIV_M3_DPLL_CORE
+ */
+#define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT			(1 << 0)
+#define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK			BITFIELD(0, 4)
+
+/*
+ * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
+ * CM_DIV_M3_DPLL_CORE
+ */
+#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT			(1 << 5)
+#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK			BITFIELD(5, 5)
+
+/*
+ * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
+ * CM_DIV_M3_DPLL_CORE
+ */
+#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK			BITFIELD(8, 8)
+
+/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT			(1 << 10)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK			BITFIELD(10, 10)
+
+/*
+ * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO,
+ * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
+ * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU
+ */
+#define OMAP4430_DPLL_CLKOUT_DIV_SHIFT				(1 << 0)
+#define OMAP4430_DPLL_CLKOUT_DIV_MASK				BITFIELD(0, 4)
+
+/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */
+#define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT			(1 << 0)
+#define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK			BITFIELD(0, 6)
+
+/*
+ * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO,
+ * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
+ * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU
+ */
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT			(1 << 5)
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK			BITFIELD(5, 5)
+
+/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT		(1 << 7)
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK		BITFIELD(7, 7)
+
+/*
+ * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE,
+ * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
+ * CM_DIV_M2_DPLL_MPU
+ */
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK			BITFIELD(8, 8)
+
+/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+#define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_CORE_DPLL_EN_MASK				BITFIELD(8, 10)
+
+/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+#define OMAP4430_DPLL_CORE_M2_DIV_SHIFT				(1 << 11)
+#define OMAP4430_DPLL_CORE_M2_DIV_MASK				BITFIELD(11, 15)
+
+/* Used by CM_SHADOW_FREQ_CONFIG2 */
+#define OMAP4430_DPLL_CORE_M5_DIV_SHIFT				(1 << 3)
+#define OMAP4430_DPLL_CORE_M5_DIV_MASK				BITFIELD(3, 7)
+
+/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_SHIFT			(1 << 1)
+#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_MASK			BITFIELD(1, 1)
+
+/*
+ * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO,
+ * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
+ * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
+ */
+#define OMAP4430_DPLL_DIV_SHIFT					(1 << 0)
+#define OMAP4430_DPLL_DIV_MASK					BITFIELD(0, 6)
+
+/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */
+#define OMAP4430_DPLL_DIV_0_7_SHIFT				(1 << 0)
+#define OMAP4430_DPLL_DIV_0_7_MASK				BITFIELD(0, 7)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_USB,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK			BITFIELD(8, 8)
+
+/* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */
+#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT			(1 << 3)
+#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK			BITFIELD(3, 3)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_EN_SHIFT					(1 << 0)
+#define OMAP4430_DPLL_EN_MASK					BITFIELD(0, 2)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_LPMODE_EN_SHIFT				(1 << 10)
+#define OMAP4430_DPLL_LPMODE_EN_MASK				BITFIELD(10, 10)
+
+/*
+ * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO,
+ * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
+ * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
+ */
+#define OMAP4430_DPLL_MULT_SHIFT				(1 << 8)
+#define OMAP4430_DPLL_MULT_MASK					BITFIELD(8, 18)
+
+/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */
+#define OMAP4430_DPLL_MULT_USB_SHIFT				(1 << 8)
+#define OMAP4430_DPLL_MULT_USB_MASK				BITFIELD(8, 19)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_REGM4XEN_SHIFT				(1 << 11)
+#define OMAP4430_DPLL_REGM4XEN_MASK				BITFIELD(11, 11)
+
+/* Used by CM_CLKSEL_DPLL_USB */
+#define OMAP4430_DPLL_SD_DIV_SHIFT				(1 << 24)
+#define OMAP4430_DPLL_SD_DIV_MASK				BITFIELD(24, 31)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_SSC_ACK_SHIFT				(1 << 13)
+#define OMAP4430_DPLL_SSC_ACK_MASK				BITFIELD(13, 13)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT			(1 << 14)
+#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK			BITFIELD(14, 14)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_SSC_EN_SHIFT				(1 << 12)
+#define OMAP4430_DPLL_SSC_EN_MASK				BITFIELD(12, 12)
+
+/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
+#define OMAP4430_DSS_DYNDEP_SHIFT				(1 << 8)
+#define OMAP4430_DSS_DYNDEP_MASK				BITFIELD(8, 8)
+
+/*
+ * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
+ * CM_MPU_STATICDEP
+ */
+#define OMAP4430_DSS_STATDEP_SHIFT				(1 << 8)
+#define OMAP4430_DSS_STATDEP_MASK				BITFIELD(8, 8)
+
+/* Used by CM_L3_2_DYNAMICDEP */
+#define OMAP4430_DUCATI_DYNDEP_SHIFT				(1 << 0)
+#define OMAP4430_DUCATI_DYNDEP_MASK				BITFIELD(0, 0)
+
+/* Used by CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP */
+#define OMAP4430_DUCATI_STATDEP_SHIFT				(1 << 0)
+#define OMAP4430_DUCATI_STATDEP_MASK				BITFIELD(0, 0)
+
+/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+#define OMAP4430_FREQ_UPDATE_SHIFT				(1 << 0)
+#define OMAP4430_FREQ_UPDATE_MASK				BITFIELD(0, 0)
+
+/* Used by CM_L3_2_DYNAMICDEP */
+#define OMAP4430_GFX_DYNDEP_SHIFT				(1 << 10)
+#define OMAP4430_GFX_DYNDEP_MASK				BITFIELD(10, 10)
+
+/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
+#define OMAP4430_GFX_STATDEP_SHIFT				(1 << 10)
+#define OMAP4430_GFX_STATDEP_MASK				BITFIELD(10, 10)
+
+/* Used by CM_SHADOW_FREQ_CONFIG2 */
+#define OMAP4430_GPMC_FREQ_UPDATE_SHIFT				(1 << 0)
+#define OMAP4430_GPMC_FREQ_UPDATE_MASK				BITFIELD(0, 0)
+
+/*
+ * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT			(1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK			BITFIELD(0, 4)
+
+/*
+ * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		(1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		BITFIELD(5, 5)
+
+/*
+ * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT		(1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		BITFIELD(8, 8)
+
+/*
+ * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT			(1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK			BITFIELD(12, 12)
+
+/*
+ * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT			(1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK			BITFIELD(0, 4)
+
+/*
+ * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		(1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		BITFIELD(5, 5)
+
+/*
+ * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT		(1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		BITFIELD(8, 8)
+
+/*
+ * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT			(1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK			BITFIELD(12, 12)
+
+/*
+ * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT			(1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK			BITFIELD(0, 4)
+
+/*
+ * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		(1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		BITFIELD(5, 5)
+
+/*
+ * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT		(1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		BITFIELD(8, 8)
+
+/*
+ * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT			(1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK			BITFIELD(12, 12)
+
+/*
+ * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_CORE
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT			(1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK			BITFIELD(0, 4)
+
+/*
+ * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_CORE
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT		(1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK		BITFIELD(5, 5)
+
+/*
+ * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_CORE
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT		(1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK		BITFIELD(8, 8)
+
+/*
+ * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_CORE
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT			(1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK			BITFIELD(12, 12)
+
+/*
+ * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL,
+ * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL,
+ * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL,
+ * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL,
+ * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL,
+ * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
+ * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
+ * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
+ * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
+ * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
+ * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL,
+ * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
+ * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
+ * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
+ * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL,
+ * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL,
+ * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL,
+ * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL,
+ * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL,
+ * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL,
+ * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
+ * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL,
+ * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL,
+ * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL,
+ * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL,
+ * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL,
+ * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL,
+ * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
+ * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
+ * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
+ * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
+ * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
+ * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
+ * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
+ * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE,
+ * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE,
+ * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL,
+ * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL,
+ * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
+ * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL,
+ * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL,
+ * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL,
+ * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL,
+ * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL,
+ * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL
+ */
+#define OMAP4430_IDLEST_SHIFT					(1 << 16)
+#define OMAP4430_IDLEST_MASK					BITFIELD(16, 17)
+
+/* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_ISS_DYNDEP_SHIFT				(1 << 9)
+#define OMAP4430_ISS_DYNDEP_MASK				BITFIELD(9, 9)
+
+/*
+ * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
+ * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_ISS_STATDEP_SHIFT				(1 << 9)
+#define OMAP4430_ISS_STATDEP_MASK				BITFIELD(9, 9)
+
+/* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
+#define OMAP4430_IVAHD_DYNDEP_SHIFT				(1 << 2)
+#define OMAP4430_IVAHD_DYNDEP_MASK				BITFIELD(2, 2)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_GFX_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_DSS_STATICDEP, CM_MPU_STATICDEP,
+ * CM_TESLA_STATICDEP
+ */
+#define OMAP4430_IVAHD_STATDEP_SHIFT				(1 << 2)
+#define OMAP4430_IVAHD_STATDEP_MASK				BITFIELD(2, 2)
+
+/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
+#define OMAP4430_L3INIT_DYNDEP_SHIFT				(1 << 7)
+#define OMAP4430_L3INIT_DYNDEP_MASK				BITFIELD(7, 7)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_L3INIT_STATDEP_SHIFT				(1 << 7)
+#define OMAP4430_L3INIT_STATDEP_MASK				BITFIELD(7, 7)
+
+/*
+ * Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L3INIT_DYNAMICDEP,
+ * CM_DSS_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
+ */
+#define OMAP4430_L3_1_DYNDEP_SHIFT				(1 << 5)
+#define OMAP4430_L3_1_DYNDEP_MASK				BITFIELD(5, 5)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
+ * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_L3_1_STATDEP_SHIFT				(1 << 5)
+#define OMAP4430_L3_1_STATDEP_MASK				BITFIELD(5, 5)
+
+/*
+ * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP,
+ * CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_SDMA_DYNAMICDEP,
+ * CM_GFX_DYNAMICDEP, CM_L4SEC_DYNAMICDEP, CM_L3INIT_DYNAMICDEP,
+ * CM_CAM_DYNAMICDEP, CM_IVAHD_DYNAMICDEP
+ */
+#define OMAP4430_L3_2_DYNDEP_SHIFT				(1 << 6)
+#define OMAP4430_L3_2_DYNDEP_MASK				BITFIELD(6, 6)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
+ * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_L3_2_STATDEP_SHIFT				(1 << 6)
+#define OMAP4430_L3_2_STATDEP_MASK				BITFIELD(6, 6)
+
+/* Used by CM_L3_1_DYNAMICDEP */
+#define OMAP4430_L4CFG_DYNDEP_SHIFT				(1 << 12)
+#define OMAP4430_L4CFG_DYNDEP_MASK				BITFIELD(12, 12)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP,
+ * CM_TESLA_STATICDEP
+ */
+#define OMAP4430_L4CFG_STATDEP_SHIFT				(1 << 12)
+#define OMAP4430_L4CFG_STATDEP_MASK				BITFIELD(12, 12)
+
+/* Used by CM_L3_2_DYNAMICDEP */
+#define OMAP4430_L4PER_DYNDEP_SHIFT				(1 << 13)
+#define OMAP4430_L4PER_DYNDEP_MASK				BITFIELD(13, 13)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
+ * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_L4PER_STATDEP_SHIFT				(1 << 13)
+#define OMAP4430_L4PER_STATDEP_MASK				BITFIELD(13, 13)
+
+/* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
+#define OMAP4430_L4SEC_DYNDEP_SHIFT				(1 << 14)
+#define OMAP4430_L4SEC_DYNDEP_MASK				BITFIELD(14, 14)
+
+/*
+ * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP
+ */
+#define OMAP4430_L4SEC_STATDEP_SHIFT				(1 << 14)
+#define OMAP4430_L4SEC_STATDEP_MASK				BITFIELD(14, 14)
+
+/* Used by CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_L4WKUP_DYNDEP_SHIFT				(1 << 15)
+#define OMAP4430_L4WKUP_DYNDEP_MASK				BITFIELD(15, 15)
+
+/*
+ * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_L4WKUP_STATDEP_SHIFT				(1 << 15)
+#define OMAP4430_L4WKUP_STATDEP_MASK				BITFIELD(15, 15)
+
+/*
+ * Used by CM_D2D_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
+ * CM_MPU_DYNAMICDEP
+ */
+#define OMAP4430_MEMIF_DYNDEP_SHIFT				(1 << 4)
+#define OMAP4430_MEMIF_DYNDEP_MASK				BITFIELD(4, 4)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
+ * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_MEMIF_STATDEP_SHIFT				(1 << 4)
+#define OMAP4430_MEMIF_STATDEP_MASK				BITFIELD(4, 4)
+
+/*
+ * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO,
+ * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE,
+ * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
+ * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
+ * CM_SSC_MODFREQDIV_DPLL_MPU
+ */
+#define OMAP4430_MODFREQDIV_EXPONENT_SHIFT			(1 << 8)
+#define OMAP4430_MODFREQDIV_EXPONENT_MASK			BITFIELD(8, 10)
+
+/*
+ * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO,
+ * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE,
+ * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
+ * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
+ * CM_SSC_MODFREQDIV_DPLL_MPU
+ */
+#define OMAP4430_MODFREQDIV_MANTISSA_SHIFT			(1 << 0)
+#define OMAP4430_MODFREQDIV_MANTISSA_MASK			BITFIELD(0, 6)
+
+/*
+ * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL,
+ * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL,
+ * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL,
+ * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL,
+ * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL,
+ * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
+ * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
+ * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
+ * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
+ * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
+ * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL,
+ * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
+ * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
+ * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
+ * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL,
+ * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL,
+ * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL,
+ * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL,
+ * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL,
+ * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL,
+ * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
+ * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL,
+ * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL,
+ * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL,
+ * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL,
+ * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL,
+ * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL,
+ * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
+ * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
+ * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
+ * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
+ * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
+ * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
+ * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
+ * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE,
+ * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE,
+ * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL,
+ * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL,
+ * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
+ * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL,
+ * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL,
+ * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL,
+ * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL,
+ * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL,
+ * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL
+ */
+#define OMAP4430_MODULEMODE_SHIFT				(1 << 0)
+#define OMAP4430_MODULEMODE_MASK				BITFIELD(0, 1)
+
+/* Used by CM_DSS_DSS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT			(1 << 9)
+#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_WKUP_BANDGAP_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT				(1 << 9)
+#define OMAP4430_OPTFCLKEN_CLK32K_MASK				BITFIELD(9, 9)
+
+/* Used by CM_CAM_ISS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK				BITFIELD(8, 8)
+
+/*
+ * Used by CM_WKUP_GPIO1_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL,
+ * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL,
+ * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE
+ */
+#define OMAP4430_OPTFCLKEN_DBCLK_SHIFT				(1 << 8)
+#define OMAP4430_OPTFCLKEN_DBCLK_MASK				BITFIELD(8, 8)
+
+/* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK				BITFIELD(8, 8)
+
+/* Used by CM_DSS_DSS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT				(1 << 8)
+#define OMAP4430_OPTFCLKEN_DSSCLK_MASK				BITFIELD(8, 8)
+
+/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_FCLK0_SHIFT				(1 << 8)
+#define OMAP4430_OPTFCLKEN_FCLK0_MASK				BITFIELD(8, 8)
+
+/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_FCLK1_SHIFT				(1 << 9)
+#define OMAP4430_OPTFCLKEN_FCLK1_MASK				BITFIELD(9, 9)
+
+/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_FCLK2_SHIFT				(1 << 10)
+#define OMAP4430_OPTFCLKEN_FCLK2_MASK				BITFIELD(10, 10)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT			(1 << 15)
+#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK			BITFIELD(15, 15)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT		(1 << 13)
+#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK			BITFIELD(13, 13)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT		(1 << 14)
+#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK			BITFIELD(14, 14)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT			(1 << 11)
+#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK			BITFIELD(11, 11)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT			(1 << 12)
+#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK			BITFIELD(12, 12)
+
+/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT		(1 << 9)
+#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_PHY_48M_MASK				BITFIELD(8, 8)
+
+/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT			(1 << 10)
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK			BITFIELD(10, 10)
+
+/* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT		(1 << 11)
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK		BITFIELD(11, 11)
+
+/* Used by CM_DSS_DSS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT			(1 << 10)
+#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK				BITFIELD(10, 10)
+
+/* Used by CM_DSS_DSS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT				(1 << 11)
+#define OMAP4430_OPTFCLKEN_TV_CLK_MASK				BITFIELD(11, 11)
+
+/* Used by CM_L3INIT_UNIPRO1_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT			(1 << 9)
+#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT			(1 << 10)
+#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT			(1 << 9)
+#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT			(1 << 10)
+#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_XCLK_SHIFT				(1 << 8)
+#define OMAP4430_OPTFCLKEN_XCLK_MASK				BITFIELD(8, 8)
+
+/* Used by CM_EMU_OVERRIDE_DPLL_PER, CM_EMU_OVERRIDE_DPLL_CORE */
+#define OMAP4430_OVERRIDE_ENABLE_SHIFT				(1 << 19)
+#define OMAP4430_OVERRIDE_ENABLE_MASK				BITFIELD(19, 19)
+
+/* Used by CM_CLKSEL_ABE */
+#define OMAP4430_PAD_CLKS_GATE_SHIFT				(1 << 8)
+#define OMAP4430_PAD_CLKS_GATE_MASK				BITFIELD(8, 8)
+
+/* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */
+#define OMAP4430_PERF_CURRENT_SHIFT				(1 << 0)
+#define OMAP4430_PERF_CURRENT_MASK				BITFIELD(0, 7)
+
+/*
+ * Used by CM_CORE_DVFS_PERF1, CM_CORE_DVFS_PERF2, CM_CORE_DVFS_PERF3,
+ * CM_CORE_DVFS_PERF4, CM_IVA_DVFS_PERF_ABE, CM_IVA_DVFS_PERF_IVAHD,
+ * CM_IVA_DVFS_PERF_TESLA
+ */
+#define OMAP4430_PERF_REQ_SHIFT					(1 << 0)
+#define OMAP4430_PERF_REQ_MASK					BITFIELD(0, 7)
+
+/* Used by CM_EMU_OVERRIDE_DPLL_PER */
+#define OMAP4430_PER_DPLL_EMU_DIV_SHIFT				(1 << 0)
+#define OMAP4430_PER_DPLL_EMU_DIV_MASK				BITFIELD(0, 6)
+
+/* Used by CM_EMU_OVERRIDE_DPLL_PER */
+#define OMAP4430_PER_DPLL_EMU_MULT_SHIFT			(1 << 8)
+#define OMAP4430_PER_DPLL_EMU_MULT_MASK				BITFIELD(8, 18)
+
+/* Used by CM_RESTORE_ST */
+#define OMAP4430_PHASE1_COMPLETED_SHIFT				(1 << 0)
+#define OMAP4430_PHASE1_COMPLETED_MASK				BITFIELD(0, 0)
+
+/* Used by CM_RESTORE_ST */
+#define OMAP4430_PHASE2A_COMPLETED_SHIFT			(1 << 1)
+#define OMAP4430_PHASE2A_COMPLETED_MASK				BITFIELD(1, 1)
+
+/* Used by CM_RESTORE_ST */
+#define OMAP4430_PHASE2B_COMPLETED_SHIFT			(1 << 2)
+#define OMAP4430_PHASE2B_COMPLETED_MASK				BITFIELD(2, 2)
+
+/* Used by CM_EMU_DEBUGSS_CLKCTRL */
+#define OMAP4430_PMD_STM_MUX_CTRL_SHIFT				(1 << 20)
+#define OMAP4430_PMD_STM_MUX_CTRL_MASK				BITFIELD(20, 21)
+
+/* Used by CM_EMU_DEBUGSS_CLKCTRL */
+#define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT			(1 << 22)
+#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK			BITFIELD(22, 23)
+
+/* Used by CM_DYN_DEP_PRESCAL */
+#define OMAP4430_PRESCAL_SHIFT					(1 << 0)
+#define OMAP4430_PRESCAL_MASK					BITFIELD(0, 5)
+
+/* Used by REVISION_CM2, REVISION_CM1 */
+#define OMAP4430_REV_SHIFT					(1 << 0)
+#define OMAP4430_REV_MASK					BITFIELD(0, 7)
+
+/*
+ * Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE
+ */
+#define OMAP4430_SAR_MODE_SHIFT					(1 << 4)
+#define OMAP4430_SAR_MODE_MASK					BITFIELD(4, 4)
+
+/* Used by CM_SCALE_FCLK */
+#define OMAP4430_SCALE_FCLK_SHIFT				(1 << 0)
+#define OMAP4430_SCALE_FCLK_MASK				BITFIELD(0, 0)
+
+/* Used by CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_SDMA_DYNDEP_SHIFT				(1 << 11)
+#define OMAP4430_SDMA_DYNDEP_MASK				BITFIELD(11, 11)
+
+/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
+#define OMAP4430_SDMA_STATDEP_SHIFT				(1 << 11)
+#define OMAP4430_SDMA_STATDEP_MASK				BITFIELD(11, 11)
+
+/* Used by CM_CLKSEL_ABE */
+#define OMAP4430_SLIMBUS_CLK_GATE_SHIFT				(1 << 10)
+#define OMAP4430_SLIMBUS_CLK_GATE_MASK				BITFIELD(10, 10)
+
+/*
+ * Used by CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_SAD2D_CLKCTRL,
+ * CM_DUCATI_DUCATI_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL,
+ * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
+ * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
+ * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
+ * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
+ * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
+ * CM_CAM_ISS_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE,
+ * CM_IVAHD_IVAHD_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL,
+ * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL
+ */
+#define OMAP4430_STBYST_SHIFT					(1 << 18)
+#define OMAP4430_STBYST_MASK					BITFIELD(18, 18)
+
+/*
+ * Used by CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB,
+ * CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY,
+ * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU
+ */
+#define OMAP4430_ST_DPLL_CLK_SHIFT				(1 << 0)
+#define OMAP4430_ST_DPLL_CLK_MASK				BITFIELD(0, 0)
+
+/* Used by CM_CLKDCOLDO_DPLL_USB */
+#define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT			(1 << 9)
+#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK				BITFIELD(9, 9)
+
+/*
+ * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE,
+ * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
+ * CM_DIV_M2_DPLL_MPU
+ */
+#define OMAP4430_ST_DPLL_CLKOUT_SHIFT				(1 << 9)
+#define OMAP4430_ST_DPLL_CLKOUT_MASK				BITFIELD(9, 9)
+
+/*
+ * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
+ * CM_DIV_M3_DPLL_CORE
+ */
+#define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT			(1 << 9)
+#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK				BITFIELD(9, 9)
+
+/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */
+#define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT				(1 << 11)
+#define OMAP4430_ST_DPLL_CLKOUTX2_MASK				BITFIELD(11, 11)
+
+/*
+ * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ */
+#define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT			(1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK			BITFIELD(9, 9)
+
+/*
+ * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ */
+#define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT			(1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK			BITFIELD(9, 9)
+
+/*
+ * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ */
+#define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT			(1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK			BITFIELD(9, 9)
+
+/*
+ * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_CORE
+ */
+#define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT			(1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK			BITFIELD(9, 9)
+
+/* Used by CM_SYS_CLKSEL */
+#define OMAP4430_SYS_CLKSEL_SHIFT				(1 << 0)
+#define OMAP4430_SYS_CLKSEL_MASK				BITFIELD(0, 2)
+
+/* Used by CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_TESLA_DYNDEP_SHIFT				(1 << 1)
+#define OMAP4430_TESLA_DYNDEP_MASK				BITFIELD(1, 1)
+
+/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
+#define OMAP4430_TESLA_STATDEP_SHIFT				(1 << 1)
+#define OMAP4430_TESLA_STATDEP_MASK				BITFIELD(1, 1)
+
+/*
+ * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP,
+ * CM_L3_1_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
+ * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
+ */
+#define OMAP4430_WINDOWSIZE_SHIFT				(1 << 24)
+#define OMAP4430_WINDOWSIZE_MASK				BITFIELD(24, 27)
+#endif
diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c
index 8eb2dab8c7db..58e4a1c557d8 100644
--- a/arch/arm/mach-omap2/cm.c
+++ b/arch/arm/mach-omap2/cm.c
@@ -21,6 +21,8 @@
 
 #include <asm/atomic.h>
 
+#include <plat/common.h>
+
 #include "cm.h"
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
@@ -61,9 +63,8 @@ int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
 	mask = 1 << idlest_shift;
 
 	/* XXX should be OMAP2 CM */
-	while (((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) != ena) &&
-	       (i++ < MAX_MODULE_READY_TIME))
-		udelay(1);
+	omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
+			  MAX_MODULE_READY_TIME, i);
 
 	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
 }
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index cfd0b726ba44..90a4086fbdf4 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -4,8 +4,8 @@
 /*
  * OMAP2/3 Clock Management (CM) register definitions
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -17,11 +17,17 @@
 #include "prcm-common.h"
 
 #define OMAP2420_CM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+			OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
 #define OMAP2430_CM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+			OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
 #define OMAP34XX_CM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+			OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+#define OMAP44XX_CM1_REGADDR(module, reg)				\
+			OMAP2_L4_IO_ADDRESS(OMAP4430_CM1_BASE + (module) + (reg))
+#define OMAP44XX_CM2_REGADDR(module, reg)				\
+			OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE + (module) + (reg))
+
+#include "cm44xx.h"
 
 /*
  * Architecture-specific global CM registers
@@ -89,6 +95,11 @@
 #define OMAP3430_CM_CLKSEL2_EMU				0x0050
 #define OMAP3430_CM_CLKSEL3_EMU				0x0054
 
+/* CM2.CEFUSE_CM2 register offsets */
+
+/* OMAP4 modulemode control */
+#define OMAP4430_MODULEMODE_HWCTRL			0
+#define OMAP4430_MODULEMODE_SWCTRL			1
 
 /* Clock management domain register get/set */
 
diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h
new file mode 100644
index 000000000000..c575b9b0c041
--- /dev/null
+++ b/arch/arm/mach-omap2/cm44xx.h
@@ -0,0 +1,358 @@
+/*
+ * OMAP44xx CM1 & CM2 instance offset macros
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM44XX_H
+
+
+/* CM1 */
+
+
+/* CM1.OCP_SOCKET_CM1 register offsets */
+#define OMAP4430_REVISION_CM1				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4430_CM_CM1_PROFILING_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0040)
+
+/* CM1.CKGEN_CM1 register offsets */
+#define OMAP4430_CM_CLKSEL_CORE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0000)
+#define OMAP4430_CM_CLKSEL_ABE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0008)
+#define OMAP4430_CM_DLL_CTRL				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0010)
+#define OMAP4430_CM_CLKMODE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0020)
+#define OMAP4430_CM_IDLEST_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0024)
+#define OMAP4430_CM_AUTOIDLE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0028)
+#define OMAP4430_CM_CLKSEL_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x002c)
+#define OMAP4430_CM_DIV_M2_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0030)
+#define OMAP4430_CM_DIV_M3_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0034)
+#define OMAP4430_CM_DIV_M4_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0038)
+#define OMAP4430_CM_DIV_M5_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x003c)
+#define OMAP4430_CM_DIV_M6_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0040)
+#define OMAP4430_CM_DIV_M7_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0044)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0048)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x004c)
+#define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0050)
+#define OMAP4430_CM_CLKMODE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0060)
+#define OMAP4430_CM_IDLEST_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0064)
+#define OMAP4430_CM_AUTOIDLE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0068)
+#define OMAP4430_CM_CLKSEL_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x006c)
+#define OMAP4430_CM_DIV_M2_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0070)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0088)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x008c)
+#define OMAP4430_CM_BYPCLK_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x009c)
+#define OMAP4430_CM_CLKMODE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a0)
+#define OMAP4430_CM_IDLEST_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a4)
+#define OMAP4430_CM_AUTOIDLE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a8)
+#define OMAP4430_CM_CLKSEL_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ac)
+#define OMAP4430_CM_DIV_M4_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00b8)
+#define OMAP4430_CM_DIV_M5_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00bc)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00c8)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00cc)
+#define OMAP4430_CM_BYPCLK_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00dc)
+#define OMAP4430_CM_CLKMODE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e0)
+#define OMAP4430_CM_IDLEST_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e4)
+#define OMAP4430_CM_AUTOIDLE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e8)
+#define OMAP4430_CM_CLKSEL_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ec)
+#define OMAP4430_CM_DIV_M2_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f0)
+#define OMAP4430_CM_DIV_M3_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f4)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0108)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x010c)
+#define OMAP4430_CM_CLKMODE_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0120)
+#define OMAP4430_CM_IDLEST_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0124)
+#define OMAP4430_CM_AUTOIDLE_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0128)
+#define OMAP4430_CM_CLKSEL_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x012c)
+#define OMAP4430_CM_DIV_M2_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0130)
+#define OMAP4430_CM_DIV_M4_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0138)
+#define OMAP4430_CM_DIV_M5_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x013c)
+#define OMAP4430_CM_DIV_M6_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0140)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0148)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x014c)
+#define OMAP4430_CM_SHADOW_FREQ_CONFIG1			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0160)
+#define OMAP4430_CM_SHADOW_FREQ_CONFIG2			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0164)
+#define OMAP4430_CM_DYN_DEP_PRESCAL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0170)
+#define OMAP4430_CM_RESTORE_ST				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0180)
+
+/* CM1.MPU_CM1 register offsets */
+#define OMAP4430_CM_MPU_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0000)
+#define OMAP4430_CM_MPU_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0004)
+#define OMAP4430_CM_MPU_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0008)
+#define OMAP4430_CM_MPU_MPU_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0020)
+
+/* CM1.TESLA_CM1 register offsets */
+#define OMAP4430_CM_TESLA_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0000)
+#define OMAP4430_CM_TESLA_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0004)
+#define OMAP4430_CM_TESLA_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0008)
+#define OMAP4430_CM_TESLA_TESLA_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0020)
+
+/* CM1.ABE_CM1 register offsets */
+#define OMAP4430_CM1_ABE_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0000)
+#define OMAP4430_CM1_ABE_L4ABE_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0020)
+#define OMAP4430_CM1_ABE_AESS_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0028)
+#define OMAP4430_CM1_ABE_PDM_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0030)
+#define OMAP4430_CM1_ABE_DMIC_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0038)
+#define OMAP4430_CM1_ABE_MCASP_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0040)
+#define OMAP4430_CM1_ABE_MCBSP1_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0048)
+#define OMAP4430_CM1_ABE_MCBSP2_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0050)
+#define OMAP4430_CM1_ABE_MCBSP3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0058)
+#define OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0060)
+#define OMAP4430_CM1_ABE_TIMER5_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0068)
+#define OMAP4430_CM1_ABE_TIMER6_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0070)
+#define OMAP4430_CM1_ABE_TIMER7_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0078)
+#define OMAP4430_CM1_ABE_TIMER8_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0080)
+#define OMAP4430_CM1_ABE_WDT3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0088)
+
+/* CM1.RESTORE_CM1 register offsets */
+#define OMAP4430_CM_CLKSEL_CORE_RESTORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0000)
+#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0004)
+#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0008)
+#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x000c)
+#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0010)
+#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0014)
+#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0018)
+#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x001c)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0020)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0024)
+#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0028)
+#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x002c)
+#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0030)
+#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0034)
+
+/* CM2 */
+
+
+/* CM2.OCP_SOCKET_CM2 register offsets */
+#define OMAP4430_REVISION_CM2				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4430_CM_CM2_PROFILING_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0040)
+
+/* CM2.CKGEN_CM2 register offsets */
+#define OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0000)
+#define OMAP4430_CM_CLKSEL_USB_60MHZ			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0004)
+#define OMAP4430_CM_SCALE_FCLK				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0008)
+#define OMAP4430_CM_CORE_DVFS_PERF1			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0010)
+#define OMAP4430_CM_CORE_DVFS_PERF2			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0014)
+#define OMAP4430_CM_CORE_DVFS_PERF3			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0018)
+#define OMAP4430_CM_CORE_DVFS_PERF4			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x001c)
+#define OMAP4430_CM_CORE_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0024)
+#define OMAP4430_CM_IVA_DVFS_PERF_TESLA			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0028)
+#define OMAP4430_CM_IVA_DVFS_PERF_IVAHD			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x002c)
+#define OMAP4430_CM_IVA_DVFS_PERF_ABE			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0030)
+#define OMAP4430_CM_IVA_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0038)
+#define OMAP4430_CM_CLKMODE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0040)
+#define OMAP4430_CM_IDLEST_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0044)
+#define OMAP4430_CM_AUTOIDLE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0048)
+#define OMAP4430_CM_CLKSEL_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x004c)
+#define OMAP4430_CM_DIV_M2_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0050)
+#define OMAP4430_CM_DIV_M3_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0054)
+#define OMAP4430_CM_DIV_M4_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0058)
+#define OMAP4430_CM_DIV_M5_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x005c)
+#define OMAP4430_CM_DIV_M6_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0060)
+#define OMAP4430_CM_DIV_M7_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0064)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0068)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x006c)
+#define OMAP4430_CM_EMU_OVERRIDE_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0070)
+#define OMAP4430_CM_CLKMODE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0080)
+#define OMAP4430_CM_IDLEST_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0084)
+#define OMAP4430_CM_AUTOIDLE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0088)
+#define OMAP4430_CM_CLKSEL_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x008c)
+#define OMAP4430_CM_DIV_M2_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0090)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00a8)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ac)
+#define OMAP4430_CM_CLKDCOLDO_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00b4)
+#define OMAP4430_CM_CLKMODE_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c0)
+#define OMAP4430_CM_IDLEST_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c4)
+#define OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c8)
+#define OMAP4430_CM_CLKSEL_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00cc)
+#define OMAP4430_CM_DIV_M2_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00d0)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00e8)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ec)
+
+/* CM2.ALWAYS_ON_CM2 register offsets */
+#define OMAP4430_CM_ALWON_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0000)
+#define OMAP4430_CM_ALWON_MDMINTC_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0020)
+#define OMAP4430_CM_ALWON_SR_MPU_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0028)
+#define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0030)
+#define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0038)
+
+/* CM2.CORE_CM2 register offsets */
+#define OMAP4430_CM_L3_1_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0000)
+#define OMAP4430_CM_L3_1_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0008)
+#define OMAP4430_CM_L3_1_L3_1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0020)
+#define OMAP4430_CM_L3_2_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0100)
+#define OMAP4430_CM_L3_2_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0108)
+#define OMAP4430_CM_L3_2_L3_2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0120)
+#define OMAP4430_CM_L3_2_GPMC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0128)
+#define OMAP4430_CM_L3_2_OCMC_RAM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0130)
+#define OMAP4430_CM_DUCATI_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0200)
+#define OMAP4430_CM_DUCATI_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0204)
+#define OMAP4430_CM_DUCATI_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0208)
+#define OMAP4430_CM_DUCATI_DUCATI_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0220)
+#define OMAP4430_CM_SDMA_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0300)
+#define OMAP4430_CM_SDMA_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0304)
+#define OMAP4430_CM_SDMA_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0308)
+#define OMAP4430_CM_SDMA_SDMA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0320)
+#define OMAP4430_CM_MEMIF_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0400)
+#define OMAP4430_CM_MEMIF_DMM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0420)
+#define OMAP4430_CM_MEMIF_EMIF_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0428)
+#define OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0430)
+#define OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0438)
+#define OMAP4430_CM_MEMIF_DLL_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0440)
+#define OMAP4430_CM_MEMIF_EMIF_H1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0450)
+#define OMAP4430_CM_MEMIF_EMIF_H2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0458)
+#define OMAP4430_CM_MEMIF_DLL_H_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0460)
+#define OMAP4430_CM_D2D_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0500)
+#define OMAP4430_CM_D2D_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0504)
+#define OMAP4430_CM_D2D_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0508)
+#define OMAP4430_CM_D2D_SAD2D_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0520)
+#define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0528)
+#define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0530)
+#define OMAP4430_CM_L4CFG_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0600)
+#define OMAP4430_CM_L4CFG_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0608)
+#define OMAP4430_CM_L4CFG_L4_CFG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0620)
+#define OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0628)
+#define OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0630)
+#define OMAP4430_CM_L4CFG_SAR_ROM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0638)
+#define OMAP4430_CM_L3INSTR_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0700)
+#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0720)
+#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0728)
+#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0740)
+
+/* CM2.IVAHD_CM2 register offsets */
+#define OMAP4430_CM_IVAHD_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0000)
+#define OMAP4430_CM_IVAHD_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0004)
+#define OMAP4430_CM_IVAHD_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0008)
+#define OMAP4430_CM_IVAHD_IVAHD_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0020)
+#define OMAP4430_CM_IVAHD_SL2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0028)
+
+/* CM2.CAM_CM2 register offsets */
+#define OMAP4430_CM_CAM_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0000)
+#define OMAP4430_CM_CAM_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0004)
+#define OMAP4430_CM_CAM_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0008)
+#define OMAP4430_CM_CAM_ISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0020)
+#define OMAP4430_CM_CAM_FDIF_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0028)
+
+/* CM2.DSS_CM2 register offsets */
+#define OMAP4430_CM_DSS_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0000)
+#define OMAP4430_CM_DSS_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0004)
+#define OMAP4430_CM_DSS_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0008)
+#define OMAP4430_CM_DSS_DSS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0020)
+#define OMAP4430_CM_DSS_DEISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0028)
+
+/* CM2.GFX_CM2 register offsets */
+#define OMAP4430_CM_GFX_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0000)
+#define OMAP4430_CM_GFX_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0004)
+#define OMAP4430_CM_GFX_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0008)
+#define OMAP4430_CM_GFX_GFX_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0020)
+
+/* CM2.L3INIT_CM2 register offsets */
+#define OMAP4430_CM_L3INIT_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0000)
+#define OMAP4430_CM_L3INIT_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0004)
+#define OMAP4430_CM_L3INIT_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0008)
+#define OMAP4430_CM_L3INIT_MMC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0028)
+#define OMAP4430_CM_L3INIT_MMC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0030)
+#define OMAP4430_CM_L3INIT_HSI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0038)
+#define OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0040)
+#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0058)
+#define OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0060)
+#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0068)
+#define OMAP4430_CM_L3INIT_P1500_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0078)
+#define OMAP4430_CM_L3INIT_EMAC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0080)
+#define OMAP4430_CM_L3INIT_SATA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0088)
+#define OMAP4430_CM_L3INIT_TPPSS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0090)
+#define OMAP4430_CM_L3INIT_PCIESS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0098)
+#define OMAP4430_CM_L3INIT_CCPTX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00a8)
+#define OMAP4430_CM_L3INIT_XHPI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c0)
+#define OMAP4430_CM_L3INIT_MMC6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c8)
+#define OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00d0)
+#define OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00e0)
+
+/* CM2.L4PER_CM2 register offsets */
+#define OMAP4430_CM_L4PER_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0000)
+#define OMAP4430_CM_L4PER_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0008)
+#define OMAP4430_CM_L4PER_ADC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0020)
+#define OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0028)
+#define OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0030)
+#define OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0038)
+#define OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0040)
+#define OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0048)
+#define OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0050)
+#define OMAP4430_CM_L4PER_ELM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0058)
+#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0060)
+#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0068)
+#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0070)
+#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0078)
+#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0080)
+#define OMAP4430_CM_L4PER_HDQ1W_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0088)
+#define OMAP4430_CM_L4PER_HECC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0090)
+#define OMAP4430_CM_L4PER_HECC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0098)
+#define OMAP4430_CM_L4PER_I2C1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a0)
+#define OMAP4430_CM_L4PER_I2C2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a8)
+#define OMAP4430_CM_L4PER_I2C3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b0)
+#define OMAP4430_CM_L4PER_I2C4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b8)
+#define OMAP4430_CM_L4PER_L4PER_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00c0)
+#define OMAP4430_CM_L4PER_MCASP2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d0)
+#define OMAP4430_CM_L4PER_MCASP3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d8)
+#define OMAP4430_CM_L4PER_MCBSP4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e0)
+#define OMAP4430_CM_L4PER_MGATE_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e8)
+#define OMAP4430_CM_L4PER_MCSPI1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f0)
+#define OMAP4430_CM_L4PER_MCSPI2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f8)
+#define OMAP4430_CM_L4PER_MCSPI3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0100)
+#define OMAP4430_CM_L4PER_MCSPI4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0108)
+#define OMAP4430_CM_L4PER_MMCSD3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0120)
+#define OMAP4430_CM_L4PER_MMCSD4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0128)
+#define OMAP4430_CM_L4PER_MSPROHG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0130)
+#define OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0138)
+#define OMAP4430_CM_L4PER_UART1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0140)
+#define OMAP4430_CM_L4PER_UART2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0148)
+#define OMAP4430_CM_L4PER_UART3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0150)
+#define OMAP4430_CM_L4PER_UART4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0158)
+#define OMAP4430_CM_L4PER_MMCSD5_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0160)
+#define OMAP4430_CM_L4PER_I2C5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0168)
+#define OMAP4430_CM_L4SEC_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0180)
+#define OMAP4430_CM_L4SEC_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0184)
+#define OMAP4430_CM_L4SEC_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0188)
+#define OMAP4430_CM_L4SEC_AES1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a0)
+#define OMAP4430_CM_L4SEC_AES2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a8)
+#define OMAP4430_CM_L4SEC_DES3DES_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b0)
+#define OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b8)
+#define OMAP4430_CM_L4SEC_RNG_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c0)
+#define OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c8)
+#define OMAP4430_CM_L4SEC_CRYPTODMA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01d8)
+
+/* CM2.CEFUSE_CM2 register offsets */
+#define OMAP4430_CM_CEFUSE_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0000)
+#define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0020)
+
+/* CM2.RESTORE_CM2 register offsets */
+#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0000)
+#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0004)
+#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0008)
+#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x000c)
+#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0010)
+#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0014)
+#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0018)
+#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x001c)
+#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0020)
+#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0024)
+#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0028)
+#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x002c)
+#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0030)
+#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0034)
+#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0038)
+#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x003c)
+#define OMAP4430_CM_SDMA_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0040)
+#endif
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 5f3aad977842..cdd1f35636dd 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,11 +15,127 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/control.h>
+#include <plat/common.h>
+#include <plat/control.h>
+#include <plat/sdrc.h>
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "prm.h"
+#include "sdrc.h"
 
 static void __iomem *omap2_ctrl_base;
 
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+struct omap3_scratchpad {
+	u32 boot_config_ptr;
+	u32 public_restore_ptr;
+	u32 secure_ram_restore_ptr;
+	u32 sdrc_module_semaphore;
+	u32 prcm_block_offset;
+	u32 sdrc_block_offset;
+};
+
+struct omap3_scratchpad_prcm_block {
+	u32 prm_clksrc_ctrl;
+	u32 prm_clksel;
+	u32 cm_clksel_core;
+	u32 cm_clksel_wkup;
+	u32 cm_clken_pll;
+	u32 cm_autoidle_pll;
+	u32 cm_clksel1_pll;
+	u32 cm_clksel2_pll;
+	u32 cm_clksel3_pll;
+	u32 cm_clken_pll_mpu;
+	u32 cm_autoidle_pll_mpu;
+	u32 cm_clksel1_pll_mpu;
+	u32 cm_clksel2_pll_mpu;
+	u32 prcm_block_size;
+};
+
+struct omap3_scratchpad_sdrc_block {
+	u16 sysconfig;
+	u16 cs_cfg;
+	u16 sharing;
+	u16 err_type;
+	u32 dll_a_ctrl;
+	u32 dll_b_ctrl;
+	u32 power;
+	u32 cs_0;
+	u32 mcfg_0;
+	u16 mr_0;
+	u16 emr_1_0;
+	u16 emr_2_0;
+	u16 emr_3_0;
+	u32 actim_ctrla_0;
+	u32 actim_ctrlb_0;
+	u32 rfr_ctrl_0;
+	u32 cs_1;
+	u32 mcfg_1;
+	u16 mr_1;
+	u16 emr_1_1;
+	u16 emr_2_1;
+	u16 emr_3_1;
+	u32 actim_ctrla_1;
+	u32 actim_ctrlb_1;
+	u32 rfr_ctrl_1;
+	u16 dcdl_1_ctrl;
+	u16 dcdl_2_ctrl;
+	u32 flags;
+	u32 block_size;
+};
+
+void *omap3_secure_ram_storage;
+
+/*
+ * This is used to store ARM registers in SDRAM before attempting
+ * an MPU OFF. The save and restore happens from the SRAM sleep code.
+ * The address is stored in scratchpad, so that it can be used
+ * during the restore path.
+ */
+u32 omap3_arm_context[128];
+
+struct omap3_control_regs {
+	u32 sysconfig;
+	u32 devconf0;
+	u32 mem_dftrw0;
+	u32 mem_dftrw1;
+	u32 msuspendmux_0;
+	u32 msuspendmux_1;
+	u32 msuspendmux_2;
+	u32 msuspendmux_3;
+	u32 msuspendmux_4;
+	u32 msuspendmux_5;
+	u32 sec_ctrl;
+	u32 devconf1;
+	u32 csirxfe;
+	u32 iva2_bootaddr;
+	u32 iva2_bootmod;
+	u32 debobs_0;
+	u32 debobs_1;
+	u32 debobs_2;
+	u32 debobs_3;
+	u32 debobs_4;
+	u32 debobs_5;
+	u32 debobs_6;
+	u32 debobs_7;
+	u32 debobs_8;
+	u32 prog_io0;
+	u32 prog_io1;
+	u32 dss_dpll_spreading;
+	u32 core_dpll_spreading;
+	u32 per_dpll_spreading;
+	u32 usbhost_dpll_spreading;
+	u32 pbias_lite;
+	u32 temp_sensor;
+	u32 sramldo4;
+	u32 sramldo5;
+	u32 csi;
+};
+
+static struct omap3_control_regs control_context;
+#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
+
 #define OMAP_CTRL_REGADDR(reg)		(omap2_ctrl_base + (reg))
 
 void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
@@ -62,3 +178,268 @@ void omap_ctrl_writel(u32 val, u16 offset)
 	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
 }
 
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+/*
+ * Clears the scratchpad contents in case of cold boot-
+ * called during bootup
+ */
+void omap3_clear_scratchpad_contents(void)
+{
+	u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
+	u32 *v_addr;
+	u32 offset = 0;
+	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
+	if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
+		OMAP3430_GLOBAL_COLD_RST) {
+		for ( ; offset <= max_offset; offset += 0x4)
+			__raw_writel(0x0, (v_addr + offset));
+		prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST, OMAP3430_GR_MOD,
+			OMAP3_PRM_RSTST_OFFSET);
+	}
+}
+
+/* Populate the scratchpad structure with restore structure */
+void omap3_save_scratchpad_contents(void)
+{
+	void * __iomem scratchpad_address;
+	u32 arm_context_addr;
+	struct omap3_scratchpad scratchpad_contents;
+	struct omap3_scratchpad_prcm_block prcm_block_contents;
+	struct omap3_scratchpad_sdrc_block sdrc_block_contents;
+
+	/* Populate the Scratchpad contents */
+	scratchpad_contents.boot_config_ptr = 0x0;
+	if (omap_rev() != OMAP3430_REV_ES3_0 &&
+					omap_rev() != OMAP3430_REV_ES3_1)
+		scratchpad_contents.public_restore_ptr =
+			virt_to_phys(get_restore_pointer());
+	else
+		scratchpad_contents.public_restore_ptr =
+			virt_to_phys(get_es3_restore_pointer());
+	if (omap_type() == OMAP2_DEVICE_TYPE_GP)
+		scratchpad_contents.secure_ram_restore_ptr = 0x0;
+	else
+		scratchpad_contents.secure_ram_restore_ptr =
+			(u32) __pa(omap3_secure_ram_storage);
+	scratchpad_contents.sdrc_module_semaphore = 0x0;
+	scratchpad_contents.prcm_block_offset = 0x2C;
+	scratchpad_contents.sdrc_block_offset = 0x64;
+
+	/* Populate the PRCM block contents */
+	prcm_block_contents.prm_clksrc_ctrl = prm_read_mod_reg(OMAP3430_GR_MOD,
+			OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+	prcm_block_contents.prm_clksel = prm_read_mod_reg(OMAP3430_CCR_MOD,
+			OMAP3_PRM_CLKSEL_OFFSET);
+	prcm_block_contents.cm_clksel_core =
+			cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
+	prcm_block_contents.cm_clksel_wkup =
+			cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
+	prcm_block_contents.cm_clken_pll =
+			cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	prcm_block_contents.cm_autoidle_pll =
+			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+	prcm_block_contents.cm_clksel1_pll =
+			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
+	prcm_block_contents.cm_clksel2_pll =
+			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
+	prcm_block_contents.cm_clksel3_pll =
+			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
+	prcm_block_contents.cm_clken_pll_mpu =
+			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
+	prcm_block_contents.cm_autoidle_pll_mpu =
+			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+	prcm_block_contents.cm_clksel1_pll_mpu =
+			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
+	prcm_block_contents.cm_clksel2_pll_mpu =
+			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
+	prcm_block_contents.prcm_block_size = 0x0;
+
+	/* Populate the SDRC block contents */
+	sdrc_block_contents.sysconfig =
+			(sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
+	sdrc_block_contents.cs_cfg =
+			(sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
+	sdrc_block_contents.sharing =
+			(sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
+	sdrc_block_contents.err_type =
+			(sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
+	sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
+	sdrc_block_contents.dll_b_ctrl = 0x0;
+	/*
+	 * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
+	 * be programed to issue automatic self refresh on timeout
+	 * of AUTO_CNT = 1 prior to any transition to OFF mode.
+	 */
+	if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
+			&& (omap_rev() >= OMAP3430_REV_ES3_0))
+		sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
+				~(SDRC_POWER_AUTOCOUNT_MASK|
+				SDRC_POWER_CLKCTRL_MASK)) |
+				(1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
+				SDRC_SELF_REFRESH_ON_AUTOCOUNT;
+	else
+		sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
+
+	sdrc_block_contents.cs_0 = 0x0;
+	sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
+	sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
+	sdrc_block_contents.emr_1_0 = 0x0;
+	sdrc_block_contents.emr_2_0 = 0x0;
+	sdrc_block_contents.emr_3_0 = 0x0;
+	sdrc_block_contents.actim_ctrla_0 =
+			sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
+	sdrc_block_contents.actim_ctrlb_0 =
+			sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
+	sdrc_block_contents.rfr_ctrl_0 =
+			sdrc_read_reg(SDRC_RFR_CTRL_0);
+	sdrc_block_contents.cs_1 = 0x0;
+	sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
+	sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
+	sdrc_block_contents.emr_1_1 = 0x0;
+	sdrc_block_contents.emr_2_1 = 0x0;
+	sdrc_block_contents.emr_3_1 = 0x0;
+	sdrc_block_contents.actim_ctrla_1 =
+			sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
+	sdrc_block_contents.actim_ctrlb_1 =
+			sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
+	sdrc_block_contents.rfr_ctrl_1 =
+			sdrc_read_reg(SDRC_RFR_CTRL_1);
+	sdrc_block_contents.dcdl_1_ctrl = 0x0;
+	sdrc_block_contents.dcdl_2_ctrl = 0x0;
+	sdrc_block_contents.flags = 0x0;
+	sdrc_block_contents.block_size = 0x0;
+
+	arm_context_addr = virt_to_phys(omap3_arm_context);
+
+	/* Copy all the contents to the scratchpad location */
+	scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
+	memcpy_toio(scratchpad_address, &scratchpad_contents,
+		 sizeof(scratchpad_contents));
+	/* Scratchpad contents being 32 bits, a divide by 4 done here */
+	memcpy_toio(scratchpad_address +
+		scratchpad_contents.prcm_block_offset,
+		&prcm_block_contents, sizeof(prcm_block_contents));
+	memcpy_toio(scratchpad_address +
+		scratchpad_contents.sdrc_block_offset,
+		&sdrc_block_contents, sizeof(sdrc_block_contents));
+	/*
+	 * Copies the address of the location in SDRAM where ARM
+	 * registers get saved during a MPU OFF transition.
+	 */
+	memcpy_toio(scratchpad_address +
+		scratchpad_contents.sdrc_block_offset +
+		sizeof(sdrc_block_contents), &arm_context_addr, 4);
+}
+
+void omap3_control_save_context(void)
+{
+	control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
+	control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	control_context.mem_dftrw0 =
+			omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
+	control_context.mem_dftrw1 =
+			omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
+	control_context.msuspendmux_0 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
+	control_context.msuspendmux_1 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
+	control_context.msuspendmux_2 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
+	control_context.msuspendmux_3 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
+	control_context.msuspendmux_4 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
+	control_context.msuspendmux_5 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
+	control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
+	control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
+	control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
+	control_context.iva2_bootaddr =
+			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
+	control_context.iva2_bootmod =
+			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
+	control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
+	control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
+	control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
+	control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
+	control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
+	control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
+	control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
+	control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
+	control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
+	control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
+	control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
+	control_context.dss_dpll_spreading =
+			omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
+	control_context.core_dpll_spreading =
+			omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
+	control_context.per_dpll_spreading =
+			omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
+	control_context.usbhost_dpll_spreading =
+		omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
+	control_context.pbias_lite =
+			omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
+	control_context.temp_sensor =
+			omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
+	control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
+	control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
+	control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
+	return;
+}
+
+void omap3_control_restore_context(void)
+{
+	omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
+	omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
+	omap_ctrl_writel(control_context.mem_dftrw0,
+					OMAP343X_CONTROL_MEM_DFTRW0);
+	omap_ctrl_writel(control_context.mem_dftrw1,
+					OMAP343X_CONTROL_MEM_DFTRW1);
+	omap_ctrl_writel(control_context.msuspendmux_0,
+					OMAP2_CONTROL_MSUSPENDMUX_0);
+	omap_ctrl_writel(control_context.msuspendmux_1,
+					OMAP2_CONTROL_MSUSPENDMUX_1);
+	omap_ctrl_writel(control_context.msuspendmux_2,
+					OMAP2_CONTROL_MSUSPENDMUX_2);
+	omap_ctrl_writel(control_context.msuspendmux_3,
+					OMAP2_CONTROL_MSUSPENDMUX_3);
+	omap_ctrl_writel(control_context.msuspendmux_4,
+					OMAP2_CONTROL_MSUSPENDMUX_4);
+	omap_ctrl_writel(control_context.msuspendmux_5,
+					OMAP2_CONTROL_MSUSPENDMUX_5);
+	omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
+	omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
+	omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
+	omap_ctrl_writel(control_context.iva2_bootaddr,
+					OMAP343X_CONTROL_IVA2_BOOTADDR);
+	omap_ctrl_writel(control_context.iva2_bootmod,
+					OMAP343X_CONTROL_IVA2_BOOTMOD);
+	omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
+	omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
+	omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
+	omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
+	omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
+	omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
+	omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
+	omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
+	omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
+	omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
+	omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
+	omap_ctrl_writel(control_context.dss_dpll_spreading,
+					OMAP343X_CONTROL_DSS_DPLL_SPREADING);
+	omap_ctrl_writel(control_context.core_dpll_spreading,
+					OMAP343X_CONTROL_CORE_DPLL_SPREADING);
+	omap_ctrl_writel(control_context.per_dpll_spreading,
+					OMAP343X_CONTROL_PER_DPLL_SPREADING);
+	omap_ctrl_writel(control_context.usbhost_dpll_spreading,
+				OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
+	omap_ctrl_writel(control_context.pbias_lite,
+					OMAP343X_CONTROL_PBIAS_LITE);
+	omap_ctrl_writel(control_context.temp_sensor,
+					OMAP343X_CONTROL_TEMP_SENSOR);
+	omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
+	omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
+	omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
+	return;
+}
+#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
new file mode 100644
index 000000000000..a26d6a08ae3f
--- /dev/null
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -0,0 +1,318 @@
+/*
+ * linux/arch/arm/mach-omap2/cpuidle34xx.c
+ *
+ * OMAP3 CPU IDLE Routines
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Karthik Dasu <karthik-dp@ti.com>
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/cpuidle.h>
+
+#include <plat/prcm.h>
+#include <plat/irqs.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
+#include <plat/control.h>
+#include <plat/serial.h>
+
+#include "pm.h"
+
+#ifdef CONFIG_CPU_IDLE
+
+#define OMAP3_MAX_STATES 7
+#define OMAP3_STATE_C1 0 /* C1 - MPU WFI + Core active */
+#define OMAP3_STATE_C2 1 /* C2 - MPU WFI + Core inactive */
+#define OMAP3_STATE_C3 2 /* C3 - MPU CSWR + Core inactive */
+#define OMAP3_STATE_C4 3 /* C4 - MPU OFF + Core iactive */
+#define OMAP3_STATE_C5 4 /* C5 - MPU RET + Core RET */
+#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */
+#define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */
+
+struct omap3_processor_cx {
+	u8 valid;
+	u8 type;
+	u32 sleep_latency;
+	u32 wakeup_latency;
+	u32 mpu_state;
+	u32 core_state;
+	u32 threshold;
+	u32 flags;
+};
+
+struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
+struct omap3_processor_cx current_cx_state;
+struct powerdomain *mpu_pd, *core_pd;
+
+static int omap3_idle_bm_check(void)
+{
+	if (!omap3_can_sleep())
+		return 1;
+	return 0;
+}
+
+static int _cpuidle_allow_idle(struct powerdomain *pwrdm,
+				struct clockdomain *clkdm)
+{
+	omap2_clkdm_allow_idle(clkdm);
+	return 0;
+}
+
+static int _cpuidle_deny_idle(struct powerdomain *pwrdm,
+				struct clockdomain *clkdm)
+{
+	omap2_clkdm_deny_idle(clkdm);
+	return 0;
+}
+
+/**
+ * omap3_enter_idle - Programs OMAP3 to enter the specified state
+ * @dev: cpuidle device
+ * @state: The target state to be programmed
+ *
+ * Called from the CPUidle framework to program the device to the
+ * specified target state selected by the governor.
+ */
+static int omap3_enter_idle(struct cpuidle_device *dev,
+			struct cpuidle_state *state)
+{
+	struct omap3_processor_cx *cx = cpuidle_get_statedata(state);
+	struct timespec ts_preidle, ts_postidle, ts_idle;
+	u32 mpu_state = cx->mpu_state, core_state = cx->core_state;
+
+	current_cx_state = *cx;
+
+	/* Used to keep track of the total time in idle */
+	getnstimeofday(&ts_preidle);
+
+	local_irq_disable();
+	local_fiq_disable();
+
+	if (!enable_off_mode) {
+		if (mpu_state < PWRDM_POWER_RET)
+			mpu_state = PWRDM_POWER_RET;
+		if (core_state < PWRDM_POWER_RET)
+			core_state = PWRDM_POWER_RET;
+	}
+
+	pwrdm_set_next_pwrst(mpu_pd, mpu_state);
+	pwrdm_set_next_pwrst(core_pd, core_state);
+
+	if (omap_irq_pending() || need_resched())
+		goto return_sleep_time;
+
+	if (cx->type == OMAP3_STATE_C1) {
+		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
+		pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
+	}
+
+	/* Execute ARM wfi */
+	omap_sram_idle();
+
+	if (cx->type == OMAP3_STATE_C1) {
+		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
+		pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
+	}
+
+return_sleep_time:
+	getnstimeofday(&ts_postidle);
+	ts_idle = timespec_sub(ts_postidle, ts_preidle);
+
+	local_irq_enable();
+	local_fiq_enable();
+
+	return (u32)timespec_to_ns(&ts_idle)/1000;
+}
+
+/**
+ * omap3_enter_idle_bm - Checks for any bus activity
+ * @dev: cpuidle device
+ * @state: The target state to be programmed
+ *
+ * Used for C states with CPUIDLE_FLAG_CHECK_BM flag set. This
+ * function checks for any pending activity and then programs the
+ * device to the specified or a safer state.
+ */
+static int omap3_enter_idle_bm(struct cpuidle_device *dev,
+			       struct cpuidle_state *state)
+{
+	struct cpuidle_state *new_state = state;
+
+	if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
+		BUG_ON(!dev->safe_state);
+		new_state = dev->safe_state;
+	}
+
+	dev->last_state = new_state;
+	return omap3_enter_idle(dev, new_state);
+}
+
+DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
+
+/* omap3_init_power_states - Initialises the OMAP3 specific C states.
+ *
+ * Below is the desciption of each C state.
+ * 	C1 . MPU WFI + Core active
+ *	C2 . MPU WFI + Core inactive
+ *	C3 . MPU CSWR + Core inactive
+ *	C4 . MPU OFF + Core inactive
+ *	C5 . MPU CSWR + Core CSWR
+ *	C6 . MPU OFF + Core CSWR
+ *	C7 . MPU OFF + Core OFF
+ */
+void omap_init_power_states(void)
+{
+	/* C1 . MPU WFI + Core active */
+	omap3_power_states[OMAP3_STATE_C1].valid = 1;
+	omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1;
+	omap3_power_states[OMAP3_STATE_C1].sleep_latency = 2;
+	omap3_power_states[OMAP3_STATE_C1].wakeup_latency = 2;
+	omap3_power_states[OMAP3_STATE_C1].threshold = 5;
+	omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID;
+
+	/* C2 . MPU WFI + Core inactive */
+	omap3_power_states[OMAP3_STATE_C2].valid = 1;
+	omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2;
+	omap3_power_states[OMAP3_STATE_C2].sleep_latency = 10;
+	omap3_power_states[OMAP3_STATE_C2].wakeup_latency = 10;
+	omap3_power_states[OMAP3_STATE_C2].threshold = 30;
+	omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID;
+
+	/* C3 . MPU CSWR + Core inactive */
+	omap3_power_states[OMAP3_STATE_C3].valid = 1;
+	omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3;
+	omap3_power_states[OMAP3_STATE_C3].sleep_latency = 50;
+	omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 50;
+	omap3_power_states[OMAP3_STATE_C3].threshold = 300;
+	omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET;
+	omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+
+	/* C4 . MPU OFF + Core inactive */
+	omap3_power_states[OMAP3_STATE_C4].valid = 1;
+	omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4;
+	omap3_power_states[OMAP3_STATE_C4].sleep_latency = 1500;
+	omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 1800;
+	omap3_power_states[OMAP3_STATE_C4].threshold = 4000;
+	omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF;
+	omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+
+	/* C5 . MPU CSWR + Core CSWR*/
+	omap3_power_states[OMAP3_STATE_C5].valid = 1;
+	omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5;
+	omap3_power_states[OMAP3_STATE_C5].sleep_latency = 2500;
+	omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 7500;
+	omap3_power_states[OMAP3_STATE_C5].threshold = 12000;
+	omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET;
+	omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET;
+	omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+
+	/* C6 . MPU OFF + Core CSWR */
+	omap3_power_states[OMAP3_STATE_C6].valid = 1;
+	omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6;
+	omap3_power_states[OMAP3_STATE_C6].sleep_latency = 3000;
+	omap3_power_states[OMAP3_STATE_C6].wakeup_latency = 8500;
+	omap3_power_states[OMAP3_STATE_C6].threshold = 15000;
+	omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF;
+	omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET;
+	omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+
+	/* C7 . MPU OFF + Core OFF */
+	omap3_power_states[OMAP3_STATE_C7].valid = 1;
+	omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7;
+	omap3_power_states[OMAP3_STATE_C7].sleep_latency = 10000;
+	omap3_power_states[OMAP3_STATE_C7].wakeup_latency = 30000;
+	omap3_power_states[OMAP3_STATE_C7].threshold = 300000;
+	omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF;
+	omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF;
+	omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+}
+
+struct cpuidle_driver omap3_idle_driver = {
+	.name = 	"omap3_idle",
+	.owner = 	THIS_MODULE,
+};
+
+/**
+ * omap3_idle_init - Init routine for OMAP3 idle
+ *
+ * Registers the OMAP3 specific cpuidle driver with the cpuidle
+ * framework with the valid set of states.
+ */
+int __init omap3_idle_init(void)
+{
+	int i, count = 0;
+	struct omap3_processor_cx *cx;
+	struct cpuidle_state *state;
+	struct cpuidle_device *dev;
+
+	mpu_pd = pwrdm_lookup("mpu_pwrdm");
+	core_pd = pwrdm_lookup("core_pwrdm");
+
+	omap_init_power_states();
+	cpuidle_register_driver(&omap3_idle_driver);
+
+	dev = &per_cpu(omap3_idle_dev, smp_processor_id());
+
+	for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
+		cx = &omap3_power_states[i];
+		state = &dev->states[count];
+
+		if (!cx->valid)
+			continue;
+		cpuidle_set_statedata(state, cx);
+		state->exit_latency = cx->sleep_latency + cx->wakeup_latency;
+		state->target_residency = cx->threshold;
+		state->flags = cx->flags;
+		state->enter = (state->flags & CPUIDLE_FLAG_CHECK_BM) ?
+			omap3_enter_idle_bm : omap3_enter_idle;
+		if (cx->type == OMAP3_STATE_C1)
+			dev->safe_state = state;
+		sprintf(state->name, "C%d", count+1);
+		count++;
+	}
+
+	if (!count)
+		return -EINVAL;
+	dev->state_count = count;
+
+	if (cpuidle_register_device(dev)) {
+		printk(KERN_ERR "%s: CPUidle register device failed\n",
+		       __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+#else
+int __init omap3_idle_init(void)
+{
+	return 0;
+}
+#endif /* CONFIG_CPU_IDLE */
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index faf7a1e0c525..18ad93160abb 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -20,12 +20,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/control.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/mux.h>
+#include <plat/control.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/mmc.h>
+#include <plat/mmc.h>
+
+#include "mux.h"
 
 #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
 
@@ -136,9 +138,10 @@ static inline void omap_init_camera(void)
 
 #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
 
-#define MBOX_REG_SIZE	0x120
+#define MBOX_REG_SIZE   0x120
 
-static struct resource omap2_mbox_resources[] = {
+#ifdef CONFIG_ARCH_OMAP2
+static struct resource omap_mbox_resources[] = {
 	{
 		.start		= OMAP24XX_MAILBOX_BASE,
 		.end		= OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
@@ -153,8 +156,10 @@ static struct resource omap2_mbox_resources[] = {
 		.flags		= IORESOURCE_IRQ,
 	},
 };
+#endif
 
-static struct resource omap3_mbox_resources[] = {
+#ifdef CONFIG_ARCH_OMAP3
+static struct resource omap_mbox_resources[] = {
 	{
 		.start		= OMAP34XX_MAILBOX_BASE,
 		.end		= OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
@@ -165,6 +170,24 @@ static struct resource omap3_mbox_resources[] = {
 		.flags		= IORESOURCE_IRQ,
 	},
 };
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+
+#define OMAP4_MBOX_REG_SIZE	0x130
+static struct resource omap_mbox_resources[] = {
+	{
+		.start          = OMAP44XX_MAILBOX_BASE,
+		.end            = OMAP44XX_MAILBOX_BASE +
+					OMAP4_MBOX_REG_SIZE - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = INT_44XX_MAIL_U0_MPU,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+#endif
 
 static struct platform_device mbox_device = {
 	.name		= "omap2-mailbox",
@@ -173,12 +196,9 @@ static struct platform_device mbox_device = {
 
 static inline void omap_init_mbox(void)
 {
-	if (cpu_is_omap2420()) {
-		mbox_device.num_resources = ARRAY_SIZE(omap2_mbox_resources);
-		mbox_device.resource = omap2_mbox_resources;
-	} else if (cpu_is_omap3430()) {
-		mbox_device.num_resources = ARRAY_SIZE(omap3_mbox_resources);
-		mbox_device.resource = omap3_mbox_resources;
+	if (cpu_is_omap2420() || cpu_is_omap3430() || cpu_is_omap44xx()) {
+		mbox_device.num_resources = ARRAY_SIZE(omap_mbox_resources);
+		mbox_device.resource = omap_mbox_resources;
 	} else {
 		pr_err("%s: platform not supported\n", __func__);
 		return;
@@ -250,7 +270,7 @@ static inline void omap_init_sti(void) {}
 
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 
 #define OMAP2_MCSPI1_BASE		0x48098000
 #define OMAP2_MCSPI2_BASE		0x4809a000
@@ -575,29 +595,42 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 		}
 	}
 
-	if (cpu_is_omap3430()) {
+	if (cpu_is_omap34xx()) {
 		if (controller_nr == 0) {
-			omap_cfg_reg(N28_3430_MMC1_CLK);
-			omap_cfg_reg(M27_3430_MMC1_CMD);
-			omap_cfg_reg(N27_3430_MMC1_DAT0);
+			omap_mux_init_signal("sdmmc1_clk",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc1_cmd",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc1_dat0",
+				OMAP_PIN_INPUT_PULLUP);
 			if (mmc_controller->slots[0].wires == 4 ||
 				mmc_controller->slots[0].wires == 8) {
-				omap_cfg_reg(N26_3430_MMC1_DAT1);
-				omap_cfg_reg(N25_3430_MMC1_DAT2);
-				omap_cfg_reg(P28_3430_MMC1_DAT3);
+				omap_mux_init_signal("sdmmc1_dat1",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat2",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat3",
+					OMAP_PIN_INPUT_PULLUP);
 			}
 			if (mmc_controller->slots[0].wires == 8) {
-				omap_cfg_reg(P27_3430_MMC1_DAT4);
-				omap_cfg_reg(P26_3430_MMC1_DAT5);
-				omap_cfg_reg(R27_3430_MMC1_DAT6);
-				omap_cfg_reg(R25_3430_MMC1_DAT7);
+				omap_mux_init_signal("sdmmc1_dat4",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat5",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat6",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat7",
+					OMAP_PIN_INPUT_PULLUP);
 			}
 		}
 		if (controller_nr == 1) {
 			/* MMC2 */
-			omap_cfg_reg(AE2_3430_MMC2_CLK);
-			omap_cfg_reg(AG5_3430_MMC2_CMD);
-			omap_cfg_reg(AH5_3430_MMC2_DAT0);
+			omap_mux_init_signal("sdmmc2_clk",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc2_cmd",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc2_dat0",
+				OMAP_PIN_INPUT_PULLUP);
 
 			/*
 			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
@@ -605,9 +638,22 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			 */
 			if (mmc_controller->slots[0].wires == 4 ||
 				mmc_controller->slots[0].wires == 8) {
-				omap_cfg_reg(AH4_3430_MMC2_DAT1);
-				omap_cfg_reg(AG4_3430_MMC2_DAT2);
-				omap_cfg_reg(AF4_3430_MMC2_DAT3);
+				omap_mux_init_signal("sdmmc2_dat1",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat2",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat3",
+					OMAP_PIN_INPUT_PULLUP);
+			}
+			if (mmc_controller->slots[0].wires == 8) {
+				omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
+					OMAP_PIN_INPUT_PULLUP);
 			}
 		}
 
diff --git a/arch/arm/mach-omap2/dpll.c b/arch/arm/mach-omap2/dpll.c
new file mode 100644
index 000000000000..f6055b493294
--- /dev/null
+++ b/arch/arm/mach-omap2/dpll.c
@@ -0,0 +1,538 @@
+/*
+ * OMAP3/4 - specific DPLL control functions
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/limits.h>
+#include <linux/bitops.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <asm/div64.h>
+#include <asm/clkdev.h>
+
+#include "clock.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE			0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
+
+#define MAX_DPLL_WAIT_TRIES		1000000
+
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+unsigned long omap3_dpll_recalc(struct clk *clk)
+{
+	return omap2_get_dpll_rate(clk);
+}
+
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	dd = clk->dpll_data;
+
+	v = __raw_readl(dd->control_reg);
+	v &= ~dd->enable_mask;
+	v |= clken_bits << __ffs(dd->enable_mask);
+	__raw_writel(v, dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
+{
+	const struct dpll_data *dd;
+	int i = 0;
+	int ret = -EINVAL;
+
+	dd = clk->dpll_data;
+
+	state <<= __ffs(dd->idlest_mask);
+
+	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
+	       i < MAX_DPLL_WAIT_TRIES) {
+		i++;
+		udelay(1);
+	}
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
+		       clk->name, (state) ? "locked" : "bypassed");
+	} else {
+		pr_debug("clock: %s transition to '%s' in %d loops\n",
+			 clk->name, (state) ? "locked" : "bypassed", i);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
+{
+	unsigned long fint;
+	u16 f = 0;
+
+	fint = clk->dpll_data->clk_ref->rate / n;
+
+	pr_debug("clock: fint is %lu\n", fint);
+
+	if (fint >= 750000 && fint <= 1000000)
+		f = 0x3;
+	else if (fint > 1000000 && fint <= 1250000)
+		f = 0x4;
+	else if (fint > 1250000 && fint <= 1500000)
+		f = 0x5;
+	else if (fint > 1500000 && fint <= 1750000)
+		f = 0x6;
+	else if (fint > 1750000 && fint <= 2100000)
+		f = 0x7;
+	else if (fint > 7500000 && fint <= 10000000)
+		f = 0xB;
+	else if (fint > 10000000 && fint <= 12500000)
+		f = 0xC;
+	else if (fint > 12500000 && fint <= 15000000)
+		f = 0xD;
+	else if (fint > 15000000 && fint <= 17500000)
+		f = 0xE;
+	else if (fint > 17500000 && fint <= 21000000)
+		f = 0xF;
+	else
+		pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+	return f;
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
+ * readiness before returning.  Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code.  If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk *clk)
+{
+	u8 ai;
+	int r;
+
+	pr_debug("clock: locking DPLL %s\n", clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	omap3_dpll_deny_idle(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+	r = _omap3_wait_dpll_status(clk, 1);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+
+	return r;
+}
+
+/*
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate.  Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code.  If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk *clk)
+{
+	int r;
+	u8 ai;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+		return -EINVAL;
+
+	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+		 clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+	r = _omap3_wait_dpll_status(clk, 0);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+	else
+		omap3_dpll_deny_idle(clk);
+
+	return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code.  If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk *clk)
+{
+	u8 ai;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+		return -EINVAL;
+
+	pr_debug("clock: stopping DPLL %s\n", clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+	else
+		omap3_dpll_deny_idle(clk);
+
+	return 0;
+}
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock.  This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state.  Intended to be used as the struct clk's
+ * enable function.  If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+int omap3_noncore_dpll_enable(struct clk *clk)
+{
+	int r;
+	struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (clk->rate == dd->clk_bypass->rate) {
+		WARN_ON(clk->parent != dd->clk_bypass);
+		r = _omap3_noncore_dpll_bypass(clk);
+	} else {
+		WARN_ON(clk->parent != dd->clk_ref);
+		r = _omap3_noncore_dpll_lock(clk);
+	}
+	/*
+	 *FIXME: this is dubious - if clk->rate has changed, what about
+	 * propagating?
+	 */
+	if (!r)
+		clk->rate = omap2_get_dpll_rate(clk);
+
+	return r;
+}
+
+/**
+ * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop.  This function is
+ * intended for use in struct clkops.  No return value.
+ */
+void omap3_noncore_dpll_disable(struct clk *clk)
+{
+	_omap3_noncore_dpll_stop(clk);
+}
+
+
+/* Non-CORE DPLL rate set code */
+
+/*
+ * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock..  Returns -EINVAL upon error, or 0 upon success.
+ */
+int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+	struct dpll_data *dd = clk->dpll_data;
+	u32 v;
+
+	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+	_omap3_noncore_dpll_bypass(clk);
+
+	/* Set jitter correction */
+	if (!cpu_is_omap44xx()) {
+		v = __raw_readl(dd->control_reg);
+		v &= ~dd->freqsel_mask;
+		v |= freqsel << __ffs(dd->freqsel_mask);
+		__raw_writel(v, dd->control_reg);
+	}
+
+	/* Set DPLL multiplier, divider */
+	v = __raw_readl(dd->mult_div1_reg);
+	v &= ~(dd->mult_mask | dd->div1_mask);
+	v |= m << __ffs(dd->mult_mask);
+	v |= (n - 1) << __ffs(dd->div1_mask);
+	__raw_writel(v, dd->mult_div1_reg);
+
+	/* We let the clock framework set the other output dividers later */
+
+	/* REVISIT: Set ramp-up delay? */
+
+	_omap3_noncore_dpll_lock(clk);
+
+	return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set non-core DPLL rate
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
+ * low-power bypass, and the target rate is the bypass source clock
+ * rate, then configure the DPLL for bypass.  Otherwise, round the
+ * target rate if it hasn't been done already, then program and lock
+ * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
+ */
+int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk *new_parent = NULL;
+	u16 freqsel = 0;
+	struct dpll_data *dd;
+	int ret;
+
+	if (!clk || !rate)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (rate == omap2_get_dpll_rate(clk))
+		return 0;
+
+	/*
+	 * Ensure both the bypass and ref clocks are enabled prior to
+	 * doing anything; we need the bypass clock running to reprogram
+	 * the DPLL.
+	 */
+	omap2_clk_enable(dd->clk_bypass);
+	omap2_clk_enable(dd->clk_ref);
+
+	if (dd->clk_bypass->rate == rate &&
+	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
+
+		ret = _omap3_noncore_dpll_bypass(clk);
+		if (!ret)
+			new_parent = dd->clk_bypass;
+	} else {
+		if (dd->last_rounded_rate != rate)
+			omap2_dpll_round_rate(clk, rate);
+
+		if (dd->last_rounded_rate == 0)
+			return -EINVAL;
+
+		/* No freqsel on OMAP4 */
+		if (!cpu_is_omap44xx()) {
+			freqsel = _omap3_dpll_compute_freqsel(clk,
+						dd->last_rounded_n);
+			if (!freqsel)
+				WARN_ON(1);
+		}
+
+		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
+			 clk->name, rate);
+
+		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
+						 dd->last_rounded_n, freqsel);
+		if (!ret)
+			new_parent = dd->clk_ref;
+	}
+	if (!ret) {
+		/*
+		 * Switch the parent clock in the heirarchy, and make sure
+		 * that the new parent's usecount is correct.  Note: we
+		 * enable the new parent before disabling the old to avoid
+		 * any unnecessary hardware disable->enable transitions.
+		 */
+		if (clk->usecount) {
+			omap2_clk_enable(new_parent);
+			omap2_clk_disable(clk->parent);
+		}
+		clk_reparent(clk, new_parent);
+		clk->rate = rate;
+	}
+	omap2_clk_disable(dd->clk_ref);
+	omap2_clk_disable(dd->clk_bypass);
+
+	return 0;
+}
+
+/* DPLL autoidle read/set code */
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+u32 omap3_dpll_autoidle_read(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+
+	v = __raw_readl(dd->autoidle_reg);
+	v &= dd->autoidle_mask;
+	v >>= __ffs(dd->autoidle_mask);
+
+	return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control.  This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430.  The DPLL will enter low-power stop when its downstream
+ * clocks are gated.  No return value.
+ */
+void omap3_dpll_allow_idle(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	/*
+	 * REVISIT: CORE DPLL can optionally enter low-power bypass
+	 * by writing 0x5 instead of 0x1.  Add some mechanism to
+	 * optionally enter this mode.
+	 */
+	v = __raw_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+	__raw_writel(v, dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control.  No return value.
+ */
+void omap3_dpll_deny_idle(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	v = __raw_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+	__raw_writel(v, dd->autoidle_reg);
+
+}
+
+/* Clock control for DPLL outputs */
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state.  If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	unsigned long rate;
+	u32 v;
+	struct clk *pclk;
+
+	/* Walk up the parents of clk, looking for a DPLL */
+	pclk = clk->parent;
+	while (pclk && !pclk->dpll_data)
+		pclk = pclk->parent;
+
+	/* clk does not have a DPLL as a parent? */
+	WARN_ON(!pclk);
+
+	dd = pclk->dpll_data;
+
+	WARN_ON(!dd->enable_mask);
+
+	v = __raw_readl(dd->control_reg) & dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+	if (v != OMAP3XXX_EN_DPLL_LOCKED)
+		rate = clk->parent->rate;
+	else
+		rate = clk->parent->rate * 2;
+	return rate;
+}
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
new file mode 100644
index 000000000000..ec0d984a26fc
--- /dev/null
+++ b/arch/arm/mach-omap2/emu.c
@@ -0,0 +1,66 @@
+/*
+ * emu.c
+ *
+ * ETM and ETB CoreSight components' resources as found in OMAP3xxx.
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shishkin");
+
+/* Cortex CoreSight components within omap3xxx EMU */
+#define ETM_BASE	(L4_EMU_34XX_PHYS + 0x10000)
+#define DBG_BASE	(L4_EMU_34XX_PHYS + 0x11000)
+#define ETB_BASE	(L4_EMU_34XX_PHYS + 0x1b000)
+#define DAPCTL		(L4_EMU_34XX_PHYS + 0x1d000)
+
+static struct amba_device omap3_etb_device = {
+	.dev		= {
+		.init_name = "etb",
+	},
+	.res		= {
+		.start	= ETB_BASE,
+		.end	= ETB_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.periphid	= 0x000bb907,
+};
+
+static struct amba_device omap3_etm_device = {
+	.dev		= {
+		.init_name = "etm",
+	},
+	.res		= {
+		.start	= ETM_BASE,
+		.end	= ETM_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.periphid	= 0x102bb921,
+};
+
+static int __init emu_init(void)
+{
+	amba_device_register(&omap3_etb_device, &iomem_resource);
+	amba_device_register(&omap3_etm_device, &iomem_resource);
+
+	return 0;
+}
+
+subsys_initcall(emu_init);
+
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 54fec53a48e7..7bb69220adfa 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -17,9 +17,9 @@
 
 #include <asm/mach/flash.h>
 
-#include <mach/onenand.h>
-#include <mach/board.h>
-#include <mach/gpmc.h>
+#include <plat/onenand.h>
+#include <plat/board.h>
+#include <plat/gpmc.h>
 
 static struct omap_onenand_platform_data *gpmc_onenand_data;
 
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index df99d31d8b64..877c6f5807b7 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -17,9 +17,9 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
 
-#include <mach/board.h>
-#include <mach/gpmc.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/board.h>
+#include <plat/gpmc.h>
+#include <plat/gpmc-smc91x.h>
 
 static struct omap_smc91x_platform_data *gpmc_cfg;
 
@@ -33,17 +33,19 @@ static struct resource gpmc_smc91x_resources[] = {
 };
 
 static struct smc91x_platdata gpmc_smc91x_info = {
-	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
 };
 
 static struct platform_device gpmc_smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),
-	.resource	= gpmc_smc91x_resources,
 	.dev		= {
 		.platform_data = &gpmc_smc91x_info,
 	},
+	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),
+	.resource	= gpmc_smc91x_resources,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f3c992e29651..bd8cb5974726 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -24,9 +24,9 @@
 #include <linux/module.h>
 
 #include <asm/mach-types.h>
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 /* GPMC register offsets */
 #define GPMC_REVISION		0x00
@@ -62,6 +62,33 @@
 #define ENABLE_PREFETCH		(0x1 << 7)
 #define DMA_MPU_MODE		2
 
+/* Structure to save gpmc cs context */
+struct gpmc_cs_config {
+	u32 config1;
+	u32 config2;
+	u32 config3;
+	u32 config4;
+	u32 config5;
+	u32 config6;
+	u32 config7;
+	int is_valid;
+};
+
+/*
+ * Structure to save/restore gpmc context
+ * to support core off on OMAP3
+ */
+struct omap3_gpmc_regs {
+	u32 sysconfig;
+	u32 irqenable;
+	u32 timeout_ctrl;
+	u32 config;
+	u32 prefetch_config1;
+	u32 prefetch_config2;
+	u32 prefetch_control;
+	struct gpmc_cs_config cs_context[GPMC_CS_NUM];
+};
+
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
@@ -261,7 +288,7 @@ static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
 	l = (base >> GPMC_CHUNK_SHIFT) & 0x3f;
 	l &= ~(0x0f << 8);
 	l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
-	l |= 1 << 6;		/* CSVALID */
+	l |= GPMC_CONFIG7_CSVALID;
 	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
 }
 
@@ -270,7 +297,7 @@ static void gpmc_cs_disable_mem(int cs)
 	u32 l;
 
 	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-	l &= ~(1 << 6);		/* CSVALID */
+	l &= ~GPMC_CONFIG7_CSVALID;
 	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
 }
 
@@ -290,7 +317,7 @@ static int gpmc_cs_mem_enabled(int cs)
 	u32 l;
 
 	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-	return l & (1 << 6);
+	return l & GPMC_CONFIG7_CSVALID;
 }
 
 int gpmc_cs_set_reserved(int cs, int reserved)
@@ -490,7 +517,7 @@ void __init gpmc_init(void)
 		ck = "gpmc_fck";
 		l = OMAP34XX_GPMC_BASE;
 	} else if (cpu_is_omap44xx()) {
-		ck = "gpmc_fck";
+		ck = "gpmc_ck";
 		l = OMAP44XX_GPMC_BASE;
 	}
 
@@ -516,3 +543,68 @@ void __init gpmc_init(void)
 	gpmc_write_reg(GPMC_SYSCONFIG, l);
 	gpmc_mem_init();
 }
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap3_gpmc_regs gpmc_context;
+
+void omap3_gpmc_save_context()
+{
+	int i;
+	gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
+	gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
+	gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
+	gpmc_context.config = gpmc_read_reg(GPMC_CONFIG);
+	gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
+	gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2);
+	gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL);
+	for (i = 0; i < GPMC_CS_NUM; i++) {
+		gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i);
+		if (gpmc_context.cs_context[i].is_valid) {
+			gpmc_context.cs_context[i].config1 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG1);
+			gpmc_context.cs_context[i].config2 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG2);
+			gpmc_context.cs_context[i].config3 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG3);
+			gpmc_context.cs_context[i].config4 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG4);
+			gpmc_context.cs_context[i].config5 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG5);
+			gpmc_context.cs_context[i].config6 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG6);
+			gpmc_context.cs_context[i].config7 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG7);
+		}
+	}
+}
+
+void omap3_gpmc_restore_context()
+{
+	int i;
+	gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
+	gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
+	gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);
+	gpmc_write_reg(GPMC_CONFIG, gpmc_context.config);
+	gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1);
+	gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2);
+	gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control);
+	for (i = 0; i < GPMC_CS_NUM; i++) {
+		if (gpmc_context.cs_context[i].is_valid) {
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG1,
+				gpmc_context.cs_context[i].config1);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG2,
+				gpmc_context.cs_context[i].config2);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG3,
+				gpmc_context.cs_context[i].config3);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG4,
+				gpmc_context.cs_context[i].config4);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG5,
+				gpmc_context.cs_context[i].config5);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG6,
+				gpmc_context.cs_context[i].config6);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG7,
+				gpmc_context.cs_context[i].config7);
+		}
+	}
+}
+#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
new file mode 100644
index 000000000000..789ca8c02f0c
--- /dev/null
+++ b/arch/arm/mach-omap2/i2c.c
@@ -0,0 +1,56 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <plat/cpu.h>
+#include <plat/i2c.h>
+#include <plat/mux.h>
+
+#include "mux.h"
+
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+			  struct i2c_board_info const *info,
+			  unsigned len)
+{
+	if (cpu_is_omap24xx()) {
+		const int omap24xx_pins[][2] = {
+			{ M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
+			{ J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
+		};
+		int scl, sda;
+
+		scl = omap24xx_pins[bus_id - 1][0];
+		sda = omap24xx_pins[bus_id - 1][1];
+		omap_cfg_reg(sda);
+		omap_cfg_reg(scl);
+	}
+
+	/* First I2C bus is not muxable */
+	if (cpu_is_omap34xx() && bus_id > 1) {
+		char mux_name[sizeof("i2c2_scl.i2c2_scl")];
+
+		sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
+		omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
+		sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
+		omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
+	}
+
+	return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
+}
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index a98201cc265c..a091b53657b9 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -21,13 +21,14 @@
 
 #include <asm/cputype.h>
 
-#include <mach/common.h>
-#include <mach/control.h>
-#include <mach/cpu.h>
+#include <plat/common.h>
+#include <plat/control.h>
+#include <plat/cpu.h>
 
 static struct omap_chip_id omap_chip;
 static unsigned int omap_revision;
 
+u32 omap3_features;
 
 unsigned int omap_rev(void)
 {
@@ -52,11 +53,11 @@ int omap_type(void)
 {
 	u32 val = 0;
 
-	if (cpu_is_omap24xx())
+	if (cpu_is_omap24xx()) {
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
-	else if (cpu_is_omap34xx())
+	} else if (cpu_is_omap34xx()) {
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
-	else {
+	} else {
 		pr_err("Cannot detect omap type!\n");
 		goto out;
 	}
@@ -155,12 +156,37 @@ void __init omap24xx_check_revision(void)
 	pr_info("\n");
 }
 
-void __init omap34xx_check_revision(void)
+#define OMAP3_CHECK_FEATURE(status,feat)				\
+	if (((status & OMAP3_ ##feat## _MASK) 				\
+		>> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { 	\
+		omap3_features |= OMAP3_HAS_ ##feat;			\
+	}
+
+void __init omap3_check_features(void)
+{
+	u32 status;
+
+	omap3_features = 0;
+
+	status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS);
+
+	OMAP3_CHECK_FEATURE(status, L2CACHE);
+	OMAP3_CHECK_FEATURE(status, IVA);
+	OMAP3_CHECK_FEATURE(status, SGX);
+	OMAP3_CHECK_FEATURE(status, NEON);
+	OMAP3_CHECK_FEATURE(status, ISP);
+
+	/*
+	 * TODO: Get additional info (where applicable)
+	 *       e.g. Size of L2 cache.
+	 */
+}
+
+void __init omap3_check_revision(void)
 {
 	u32 cpuid, idcode;
 	u16 hawkeye;
 	u8 rev;
-	char *rev_name = "ES1.0";
 
 	/*
 	 * We cannot access revision registers on ES1.0.
@@ -170,7 +196,7 @@ void __init omap34xx_check_revision(void)
 	cpuid = read_cpuid(CPUID_ID);
 	if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
 		omap_revision = OMAP3430_REV_ES1_0;
-		goto out;
+		return;
 	}
 
 	/*
@@ -183,33 +209,140 @@ void __init omap34xx_check_revision(void)
 	hawkeye = (idcode >> 12) & 0xffff;
 	rev = (idcode >> 28) & 0xff;
 
-	if (hawkeye == 0xb7ae) {
+	switch (hawkeye) {
+	case 0xb7ae:
+		/* Handle 34xx/35xx devices */
 		switch (rev) {
-		case 0:
+		case 0: /* Take care of early samples */
+		case 1:
 			omap_revision = OMAP3430_REV_ES2_0;
-			rev_name = "ES2.0";
 			break;
 		case 2:
 			omap_revision = OMAP3430_REV_ES2_1;
-			rev_name = "ES2.1";
 			break;
 		case 3:
 			omap_revision = OMAP3430_REV_ES3_0;
-			rev_name = "ES3.0";
 			break;
 		case 4:
-			omap_revision = OMAP3430_REV_ES3_1;
-			rev_name = "ES3.1";
-			break;
+		/* FALLTHROUGH */
 		default:
 			/* Use the latest known revision as default */
 			omap_revision = OMAP3430_REV_ES3_1;
-			rev_name = "Unknown revision\n";
 		}
+		break;
+	case 0xb868:
+		/* Handle OMAP35xx/AM35xx devices
+		 *
+		 * Set the device to be OMAP3505 here. Actual device
+		 * is identified later based on the features.
+		 */
+		omap_revision = OMAP3505_REV(rev);
+		break;
+	case 0xb891:
+	/* FALLTHROUGH */
+	default:
+		/* Unknown default to latest silicon rev as default*/
+		omap_revision = OMAP3630_REV_ES1_0;
 	}
+}
 
-out:
-	pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
+void __init omap4_check_revision(void)
+{
+	u32 idcode;
+	u16 hawkeye;
+	u8 rev;
+	char *rev_name = "ES1.0";
+
+	/*
+	 * The IC rev detection is done with hawkeye and rev.
+	 * Note that rev does not map directly to defined processor
+	 * revision numbers as ES1.0 uses value 0.
+	 */
+	idcode = read_tap_reg(OMAP_TAP_IDCODE);
+	hawkeye = (idcode >> 12) & 0xffff;
+	rev = (idcode >> 28) & 0xff;
+
+	if ((hawkeye == 0xb852) && (rev == 0x0)) {
+		omap_revision = OMAP4430_REV_ES1_0;
+		pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
+		return;
+	}
+
+	pr_err("Unknown OMAP4 CPU id\n");
+}
+
+#define OMAP3_SHOW_FEATURE(feat)		\
+	if (omap3_has_ ##feat())		\
+		printk(#feat" ");
+
+void __init omap3_cpuinfo(void)
+{
+	u8 rev = GET_OMAP_REVISION();
+	char cpu_name[16], cpu_rev[16];
+
+	/* OMAP3430 and OMAP3530 are assumed to be same.
+	 *
+	 * OMAP3525, OMAP3515 and OMAP3503 can be detected only based
+	 * on available features. Upon detection, update the CPU id
+	 * and CPU class bits.
+	 */
+	if (cpu_is_omap3630()) {
+		strcpy(cpu_name, "OMAP3630");
+	} else if (cpu_is_omap3505()) {
+		/*
+		 * AM35xx devices
+		 */
+		if (omap3_has_sgx()) {
+			omap_revision = OMAP3517_REV(rev);
+			strcpy(cpu_name, "AM3517");
+		} else {
+			/* Already set in omap3_check_revision() */
+			strcpy(cpu_name, "AM3505");
+		}
+	} else if (omap3_has_iva() && omap3_has_sgx()) {
+		/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
+		strcpy(cpu_name, "OMAP3430/3530");
+	} else if (omap3_has_iva()) {
+		omap_revision = OMAP3525_REV(rev);
+		strcpy(cpu_name, "OMAP3525");
+	} else if (omap3_has_sgx()) {
+		omap_revision = OMAP3515_REV(rev);
+		strcpy(cpu_name, "OMAP3515");
+	} else {
+		omap_revision = OMAP3503_REV(rev);
+		strcpy(cpu_name, "OMAP3503");
+	}
+
+	switch (rev) {
+	case OMAP_REVBITS_00:
+		strcpy(cpu_rev, "1.0");
+		break;
+	case OMAP_REVBITS_10:
+		strcpy(cpu_rev, "2.0");
+		break;
+	case OMAP_REVBITS_20:
+		strcpy(cpu_rev, "2.1");
+		break;
+	case OMAP_REVBITS_30:
+		strcpy(cpu_rev, "3.0");
+		break;
+	case OMAP_REVBITS_40:
+	/* FALLTHROUGH */
+	default:
+		/* Use the latest known revision as default */
+		strcpy(cpu_rev, "3.1");
+	}
+
+	/* Print verbose information */
+	pr_info("%s ES%s (", cpu_name, cpu_rev);
+
+	OMAP3_SHOW_FEATURE(l2cache);
+	OMAP3_SHOW_FEATURE(iva);
+	OMAP3_SHOW_FEATURE(sgx);
+	OMAP3_SHOW_FEATURE(neon);
+	OMAP3_SHOW_FEATURE(isp);
+
+	printk(")\n");
 }
 
 /*
@@ -221,15 +354,18 @@ void __init omap2_check_revision(void)
 	 * At this point we have an idea about the processor revision set
 	 * earlier with omap2_set_globals_tap().
 	 */
-	if (cpu_is_omap24xx())
+	if (cpu_is_omap24xx()) {
 		omap24xx_check_revision();
-	else if (cpu_is_omap34xx())
-		omap34xx_check_revision();
-	else if (cpu_is_omap44xx()) {
-		printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+	} else if (cpu_is_omap34xx()) {
+		omap3_check_revision();
+		omap3_check_features();
+		omap3_cpuinfo();
+	} else if (cpu_is_omap44xx()) {
+		omap4_check_revision();
 		return;
-	} else
+	} else {
 		pr_err("OMAP revision unknown, please fix!\n");
+	}
 
 	/*
 	 * OK, now we know the exact revision. Initialize omap_chip bits
@@ -241,6 +377,8 @@ void __init omap2_check_revision(void)
 	} else if (cpu_is_omap242x()) {
 		/* Currently only supports 2420ES2.1.1 and 2420-all */
 		omap_chip.oc |= CHIP_IS_OMAP2420;
+	} else if (cpu_is_omap3505() || cpu_is_omap3517()) {
+		omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1;
 	} else if (cpu_is_omap343x()) {
 		omap_chip.oc = CHIP_IS_OMAP3430;
 		if (omap_rev() == OMAP3430_REV_ES1_0)
@@ -252,6 +390,8 @@ void __init omap2_check_revision(void)
 			omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
 		else if (omap_rev() == OMAP3430_REV_ES3_1)
 			omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+		else if (omap_rev() == OMAP3630_REV_ES1_0)
+			omap_chip.oc |= CHIP_IS_OMAP3630ES1;
 	} else {
 		pr_err("Uninitialized omap_chip, please fix!\n");
 	}
diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h
new file mode 100644
index 000000000000..c93b29e21b78
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/board-zoom.h
@@ -0,0 +1,5 @@
+/*
+ * Defines for zoom boards
+ */
+extern int __init zoom_debugboard_init(void);
+extern void __init zoom_peripherals_init(void);
diff --git a/arch/arm/mach-omap2/include/mach/clkdev.h b/arch/arm/mach-omap2/include/mach/clkdev.h
new file mode 100644
index 000000000000..53b027441c56
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/clkdev.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/clkdev.h
+ */
+
+#include <plat/clkdev.h>
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index ac24050e3416..e9f255df9163 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* arch/arm/plat-omap/include/mach/debug-macro.S
+/* arch/arm/mach-omap2/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
@@ -14,20 +14,9 @@
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-#ifdef CONFIG_ARCH_OMAP1
-		moveq	\rx, #0xff000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		orr	\rx, \rx, #0x00009000	@ UART 3
-#endif
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
-		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
-#endif
-
-#elif  CONFIG_ARCH_OMAP2
+#ifdef  CONFIG_ARCH_OMAP2
 		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xd8000000	@ virtual base
+		movne	\rx, #0xfa000000	@ virtual base
 		orr	\rx, \rx, #0x0006a000
 #ifdef CONFIG_OMAP_LL_DEBUG_UART2
 		add	\rx, \rx, #0x00002000	@ UART 2
@@ -38,7 +27,7 @@
 
 #elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xd8000000	@ virtual base
+		movne	\rx, #0xfa000000	@ virtual base
 		orr	\rx, \rx, #0x0006a000
 #ifdef CONFIG_OMAP_LL_DEBUG_UART2
 		add	\rx, \rx, #0x00002000	@ UART 2
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index a5592991634d..c7f1720bf282 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -15,65 +15,17 @@
 #include <mach/irqs.h>
 #include <asm/hardware/gic.h>
 
-#if defined(CONFIG_ARCH_OMAP1)
-
-#if defined(CONFIG_ARCH_OMAP730) && \
-	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
-#error "FIXME: OMAP730 doesn't support multiple-OMAP"
-#elif defined(CONFIG_ARCH_OMAP730)
-#define INT_IH2_IRQ		INT_730_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP15XX)
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#define INT_IH2_IRQ		INT_1610_IH2_IRQ
-#else
-#warning "IH2 IRQ defaulted"
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#endif
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
-		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
-		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
-		mov	\irqstat, #0xffffffff
-		bic	\tmp, \irqstat, \tmp
-		tst	\irqnr, \tmp
-		beq	1510f
-
-		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
-		cmp	\irqnr, #0
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		cmpeq	\irqnr, #INT_IH2_IRQ
-		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		addeqs	\irqnr, \irqnr, #32
-1510:
-		.endm
-
-#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
-
-#include <mach/omap24xx.h>
-#include <mach/omap34xx.h>
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
 
 /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
 #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP2_VA_IC_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
 #elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP2_VA_IC_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
-#include <mach/omap44xx.h>
+#include <plat/omap44xx.h>
 #endif
 #define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
 #define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
@@ -104,6 +56,8 @@
 
 		.endm
 #else
+#define OMAP44XX_VA_GIC_CPU_BASE	OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+
 		/*
 		 * The interrupt numbering scheme is defined in the
 		 * interrupt controller spec.  To wit:
@@ -168,5 +122,3 @@
 
 		.macro	irq_prio_table
 		.endm
-
-#endif
diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h
new file mode 100644
index 000000000000..be4d290d57ee
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/gpio.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/gpio.h
+ */
+
+#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h
new file mode 100644
index 000000000000..78edf9d33f71
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/hardware.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/hardware.h
+ */
+
+#include <plat/hardware.h>
diff --git a/arch/arm/mach-omap2/include/mach/io.h b/arch/arm/mach-omap2/include/mach/io.h
new file mode 100644
index 000000000000..fd78f31aa1ad
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/io.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/io.h
+ */
+
+#include <plat/io.h>
diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h
new file mode 100644
index 000000000000..44dab7725696
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/irqs.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/irqs.h
+ */
+
+#include <plat/irqs.h>
diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h
new file mode 100644
index 000000000000..ca6d32a917dd
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/memory.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/memory.h
+ */
+
+#include <plat/memory.h>
diff --git a/arch/arm/mach-omap2/include/mach/smp.h b/arch/arm/mach-omap2/include/mach/smp.h
new file mode 100644
index 000000000000..323675f21b69
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/smp.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/smp.h
+ */
+
+#include <plat/smp.h>
diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h
new file mode 100644
index 000000000000..d488721ab90b
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/system.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/system.h
+ */
+
+#include <plat/system.h>
diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h
new file mode 100644
index 000000000000..de9f8fc40e7c
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/timex.h
+ */
+
+#include <plat/timex.h>
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
new file mode 100644
index 000000000000..78e0557bfd4e
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/uncompress.h
+ */
+
+#include <plat/uncompress.h>
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
index b97dfafeebda..9ce9b6e8ad23 100644
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap2/include/mach/vmalloc.h
@@ -17,5 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x18000000)
-
+#define VMALLOC_END	  (PAGE_OFFSET + 0x38000000)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 56be87d13edb..a8749e8017b9 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -22,29 +22,29 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/omapfb.h>
 
 #include <asm/tlb.h>
 
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/omapfb.h>
-#include <mach/sram.h>
-#include <mach/sdrc.h>
-#include <mach/gpmc.h>
-#include <mach/serial.h>
+#include <plat/mux.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
+#include <plat/gpmc.h>
+#include <plat/serial.h>
+#include <plat/mux.h>
+#include <plat/vram.h>
 
-#ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
-#include <mach/omap-pm.h>
-#include <mach/powerdomain.h>
+#include <plat/omap-pm.h>
+#include <plat/powerdomain.h>
 #include "powerdomains.h"
 
-#include <mach/clockdomain.h>
+#include <plat/clockdomain.h>
 #include "clockdomains.h"
-#endif
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include "omap_hwmod_2420.h"
 #include "omap_hwmod_2430.h"
 #include "omap_hwmod_34xx.h"
@@ -203,6 +203,24 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 		.type		= MT_DEVICE,
 	},
 	{
+		.virtual	= OMAP44XX_EMIF1_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_EMIF1_PHYS),
+		.length		= OMAP44XX_EMIF1_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= OMAP44XX_EMIF2_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_EMIF2_PHYS),
+		.length		= OMAP44XX_EMIF2_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= OMAP44XX_DMM_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_DMM_PHYS),
+		.length		= OMAP44XX_DMM_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
 		.virtual	= L4_PER_44XX_VIRT,
 		.pfn		= __phys_to_pfn(L4_PER_44XX_PHYS),
 		.length		= L4_PER_44XX_SIZE,
@@ -246,6 +264,7 @@ void __init omap2_map_common_io(void)
 	omap2_check_revision();
 	omap_sram_init();
 	omapfb_reserve_sdram();
+	omap_vram_reserve_sdram();
 }
 
 /*
@@ -301,8 +320,8 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
-	omap2_clk_init();
 #endif
+	omap2_clk_init();
 	omap_serial_early_init();
 #ifndef CONFIG_ARCH_OMAP4
 	omap_hwmod_late_init();
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 4a0e1cd5c1f4..6f4b7cc8f4d1 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -17,7 +17,7 @@
 #include <linux/module.h>
 #include <linux/stringify.h>
 
-#include <mach/iommu.h>
+#include <plat/iommu.h>
 
 /*
  * omap2 architecture specific register bit definitions
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index b82863887f10..e9bc782fa414 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -25,6 +25,10 @@
 #define INTC_SYSSTATUS		0x0014
 #define INTC_SIR		0x0040
 #define INTC_CONTROL		0x0048
+#define INTC_PROTECTION		0x004C
+#define INTC_IDLE		0x0050
+#define INTC_THRESHOLD		0x0068
+#define INTC_MIR0		0x0084
 #define INTC_MIR_CLEAR0		0x0088
 #define INTC_MIR_SET0		0x008c
 #define INTC_PENDING_IRQ0	0x0098
@@ -48,6 +52,18 @@ static struct omap_irq_bank {
 	},
 };
 
+/* Structure to save interrupt controller context */
+struct omap3_intc_regs {
+	u32 sysconfig;
+	u32 protection;
+	u32 idle;
+	u32 threshold;
+	u32 ilr[INTCPS_NR_IRQS];
+	u32 mir[INTCPS_NR_MIR_REGS];
+};
+
+static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
+
 /* INTC bank register get/set */
 
 static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
@@ -178,12 +194,20 @@ void __init omap_init_irq(void)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+		unsigned long base;
 		struct omap_irq_bank *bank = irq_banks + i;
 
 		if (cpu_is_omap24xx())
-			bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
+			base = OMAP24XX_IC_BASE;
 		else if (cpu_is_omap34xx())
-			bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
+			base = OMAP34XX_IC_BASE;
+
+		/* Static mapping, never released */
+		bank->base_reg = ioremap(base, SZ_4K);
+		if (!bank->base_reg) {
+			printk(KERN_ERR "Could not ioremap irq bank%i\n", i);
+			continue;
+		}
 
 		omap_irq_bank_init_one(bank);
 
@@ -201,3 +225,53 @@ void __init omap_init_irq(void)
 	}
 }
 
+#ifdef CONFIG_ARCH_OMAP3
+void omap_intc_save_context(void)
+{
+	int ind = 0, i = 0;
+	for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
+		struct omap_irq_bank *bank = irq_banks + ind;
+		intc_context[ind].sysconfig =
+			intc_bank_read_reg(bank, INTC_SYSCONFIG);
+		intc_context[ind].protection =
+			intc_bank_read_reg(bank, INTC_PROTECTION);
+		intc_context[ind].idle =
+			intc_bank_read_reg(bank, INTC_IDLE);
+		intc_context[ind].threshold =
+			intc_bank_read_reg(bank, INTC_THRESHOLD);
+		for (i = 0; i < INTCPS_NR_IRQS; i++)
+			intc_context[ind].ilr[i] =
+				intc_bank_read_reg(bank, (0x100 + 0x4*i));
+		for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
+			intc_context[ind].mir[i] =
+				intc_bank_read_reg(&irq_banks[0], INTC_MIR0 +
+				(0x20 * i));
+	}
+}
+
+void omap_intc_restore_context(void)
+{
+	int ind = 0, i = 0;
+
+	for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
+		struct omap_irq_bank *bank = irq_banks + ind;
+		intc_bank_write_reg(intc_context[ind].sysconfig,
+					bank, INTC_SYSCONFIG);
+		intc_bank_write_reg(intc_context[ind].sysconfig,
+					bank, INTC_SYSCONFIG);
+		intc_bank_write_reg(intc_context[ind].protection,
+					bank, INTC_PROTECTION);
+		intc_bank_write_reg(intc_context[ind].idle,
+					bank, INTC_IDLE);
+		intc_bank_write_reg(intc_context[ind].threshold,
+					bank, INTC_THRESHOLD);
+		for (i = 0; i < INTCPS_NR_IRQS; i++)
+			intc_bank_write_reg(intc_context[ind].ilr[i],
+				bank, (0x100 + 0x4*i));
+		for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
+			intc_bank_write_reg(intc_context[ind].mir[i],
+				 &irq_banks[0], INTC_MIR0 + (0x20 * i));
+	}
+	/* MIRs are saved and restore with other PRCM registers */
+}
+#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index ef57b38a56a4..281ab6342448 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -15,9 +15,11 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <mach/mailbox.h>
+#include <plat/mailbox.h>
 #include <mach/irqs.h>
 
+#define DRV_NAME "omap2-mailbox"
+
 #define MAILBOX_REVISION		0x000
 #define MAILBOX_SYSCONFIG		0x010
 #define MAILBOX_SYSSTATUS		0x014
@@ -27,8 +29,12 @@
 #define MAILBOX_IRQSTATUS(u)		(0x100 + 8 * (u))
 #define MAILBOX_IRQENABLE(u)		(0x104 + 8 * (u))
 
-#define MAILBOX_IRQ_NEWMSG(u)		(1 << (2 * (u)))
-#define MAILBOX_IRQ_NOTFULL(u)		(1 << (2 * (u) + 1))
+#define OMAP4_MAILBOX_IRQSTATUS(u)	(0x104 + 10 * (u))
+#define OMAP4_MAILBOX_IRQENABLE(u)	(0x108 + 10 * (u))
+#define OMAP4_MAILBOX_IRQENABLE_CLR(u)	(0x10c + 10 * (u))
+
+#define MAILBOX_IRQ_NEWMSG(m)		(1 << (2 * (m)))
+#define MAILBOX_IRQ_NOTFULL(m)		(1 << (2 * (m) + 1))
 
 /* SYSCONFIG: register bit definition */
 #define AUTOIDLE	(1 << 0)
@@ -39,7 +45,11 @@
 #define RESETDONE	(1 << 0)
 
 #define MBOX_REG_SIZE			0x120
+
+#define OMAP4_MBOX_REG_SIZE		0x130
+
 #define MBOX_NR_REGS			(MBOX_REG_SIZE / sizeof(u32))
+#define OMAP4_MBOX_NR_REGS		(OMAP4_MBOX_REG_SIZE / sizeof(u32))
 
 static void __iomem *mbox_base;
 
@@ -56,7 +66,8 @@ struct omap_mbox2_priv {
 	unsigned long irqstatus;
 	u32 newmsg_bit;
 	u32 notfull_bit;
-	u32 ctx[MBOX_NR_REGS];
+	u32 ctx[OMAP4_MBOX_NR_REGS];
+	unsigned long irqdisable;
 };
 
 static struct clk *mbox_ick_handle;
@@ -82,8 +93,9 @@ static int omap2_mbox_startup(struct omap_mbox *mbox)
 
 	mbox_ick_handle = clk_get(NULL, "mailboxes_ick");
 	if (IS_ERR(mbox_ick_handle)) {
-		pr_err("Can't get mailboxes_ick\n");
-		return -ENODEV;
+		printk(KERN_ERR "Could not get mailboxes_ick: %d\n",
+			PTR_ERR(mbox_ick_handle));
+		return PTR_ERR(mbox_ick_handle);
 	}
 	clk_enable(mbox_ick_handle);
 
@@ -115,6 +127,7 @@ static void omap2_mbox_shutdown(struct omap_mbox *mbox)
 {
 	clk_disable(mbox_ick_handle);
 	clk_put(mbox_ick_handle);
+	mbox_ick_handle = NULL;
 }
 
 /* Mailbox FIFO handle functions */
@@ -143,7 +156,7 @@ static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
-	return (mbox_read_reg(fifo->fifo_stat));
+	return mbox_read_reg(fifo->fifo_stat);
 }
 
 /* Mailbox IRQ handle functions */
@@ -163,10 +176,9 @@ static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
 	u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
-
-	l = mbox_read_reg(p->irqenable);
+	l = mbox_read_reg(p->irqdisable);
 	l &= ~bit;
-	mbox_write_reg(l, p->irqenable);
+	mbox_write_reg(l, p->irqdisable);
 }
 
 static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
@@ -189,15 +201,19 @@ static int omap2_mbox_is_irq(struct omap_mbox *mbox,
 	u32 enable = mbox_read_reg(p->irqenable);
 	u32 status = mbox_read_reg(p->irqstatus);
 
-	return (enable & status & bit);
+	return (int)(enable & status & bit);
 }
 
 static void omap2_mbox_save_ctx(struct omap_mbox *mbox)
 {
 	int i;
 	struct omap_mbox2_priv *p = mbox->priv;
-
-	for (i = 0; i < MBOX_NR_REGS; i++) {
+	int nr_regs;
+	if (cpu_is_omap44xx())
+		nr_regs = OMAP4_MBOX_NR_REGS;
+	else
+		nr_regs = MBOX_NR_REGS;
+	for (i = 0; i < nr_regs; i++) {
 		p->ctx[i] = mbox_read_reg(i * sizeof(u32));
 
 		dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
@@ -209,8 +225,12 @@ static void omap2_mbox_restore_ctx(struct omap_mbox *mbox)
 {
 	int i;
 	struct omap_mbox2_priv *p = mbox->priv;
-
-	for (i = 0; i < MBOX_NR_REGS; i++) {
+	int nr_regs;
+	if (cpu_is_omap44xx())
+		nr_regs = OMAP4_MBOX_NR_REGS;
+	else
+		nr_regs = MBOX_NR_REGS;
+	for (i = 0; i < nr_regs; i++) {
 		mbox_write_reg(p->ctx[i], i * sizeof(u32));
 
 		dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
@@ -242,7 +262,6 @@ static struct omap_mbox_ops omap2_mbox_ops = {
  */
 
 /* FIXME: the following structs should be filled automatically by the user id */
-
 /* DSP */
 static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.tx_fifo = {
@@ -257,8 +276,36 @@ static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.irqstatus	= MAILBOX_IRQSTATUS(0),
 	.notfull_bit	= MAILBOX_IRQ_NOTFULL(0),
 	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(1),
+	.irqdisable	= MAILBOX_IRQENABLE(0),
+};
+
+
+
+/* OMAP4 specific data structure. Use the cpu_is_omap4xxx()
+to use this*/
+static struct omap_mbox2_priv omap2_mbox_1_priv = {
+	.tx_fifo = {
+		.msg		= MAILBOX_MESSAGE(0),
+		.fifo_stat	= MAILBOX_FIFOSTATUS(0),
+	},
+	.rx_fifo = {
+		.msg		= MAILBOX_MESSAGE(1),
+		.msg_stat	= MAILBOX_MSGSTATUS(1),
+	},
+	.irqenable	= OMAP4_MAILBOX_IRQENABLE(0),
+	.irqstatus	= OMAP4_MAILBOX_IRQSTATUS(0),
+	.notfull_bit	= MAILBOX_IRQ_NOTFULL(0),
+	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(1),
+	.irqdisable	= OMAP4_MAILBOX_IRQENABLE_CLR(0),
 };
 
+struct omap_mbox mbox_1_info = {
+	.name	= "mailbox-1",
+	.ops	= &omap2_mbox_ops,
+	.priv	= &omap2_mbox_1_priv,
+};
+EXPORT_SYMBOL(mbox_1_info);
+
 struct omap_mbox mbox_dsp_info = {
 	.name	= "dsp",
 	.ops	= &omap2_mbox_ops,
@@ -266,6 +313,30 @@ struct omap_mbox mbox_dsp_info = {
 };
 EXPORT_SYMBOL(mbox_dsp_info);
 
+static struct omap_mbox2_priv omap2_mbox_2_priv = {
+	.tx_fifo = {
+		.msg		= MAILBOX_MESSAGE(3),
+		.fifo_stat	= MAILBOX_FIFOSTATUS(3),
+	},
+	.rx_fifo = {
+		.msg		= MAILBOX_MESSAGE(2),
+		.msg_stat	= MAILBOX_MSGSTATUS(2),
+	},
+	.irqenable	= OMAP4_MAILBOX_IRQENABLE(0),
+	.irqstatus	= OMAP4_MAILBOX_IRQSTATUS(0),
+	.notfull_bit	= MAILBOX_IRQ_NOTFULL(3),
+	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(2),
+	.irqdisable     = OMAP4_MAILBOX_IRQENABLE_CLR(0),
+};
+
+struct omap_mbox mbox_2_info = {
+	.name	= "mailbox-2",
+	.ops	= &omap2_mbox_ops,
+	.priv	= &omap2_mbox_2_priv,
+};
+EXPORT_SYMBOL(mbox_2_info);
+
+
 #if defined(CONFIG_ARCH_OMAP2420) /* IVA */
 static struct omap_mbox2_priv omap2_mbox_iva_priv = {
 	.tx_fifo = {
@@ -280,6 +351,7 @@ static struct omap_mbox2_priv omap2_mbox_iva_priv = {
 	.irqstatus	= MAILBOX_IRQSTATUS(3),
 	.notfull_bit	= MAILBOX_IRQ_NOTFULL(2),
 	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(3),
+	.irqdisable	= MAILBOX_IRQENABLE(3),
 };
 
 static struct omap_mbox mbox_iva_info = {
@@ -305,17 +377,31 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* DSP or IVA2 IRQ */
-	ret = platform_get_irq(pdev, 0);
-	if (ret < 0) {
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	if (unlikely(!res)) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
+		ret = -ENODEV;
 		goto err_dsp;
 	}
-	mbox_dsp_info.irq = ret;
-
-	ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+	if (cpu_is_omap44xx()) {
+		mbox_1_info.irq = res->start;
+		ret = omap_mbox_register(&pdev->dev, &mbox_1_info);
+	} else {
+		mbox_dsp_info.irq = res->start;
+		ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+	}
 	if (ret)
 		goto err_dsp;
 
+	if (cpu_is_omap44xx()) {
+		mbox_2_info.irq = res->start;
+		ret = omap_mbox_register(&pdev->dev, &mbox_2_info);
+		if (ret) {
+			omap_mbox_unregister(&mbox_1_info);
+			goto err_dsp;
+		}
+	}
 #if defined(CONFIG_ARCH_OMAP2420) /* IVA */
 	if (cpu_is_omap2420()) {
 		/* IVA IRQ */
@@ -335,6 +421,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 
 err_iva1:
 	omap_mbox_unregister(&mbox_dsp_info);
+
 err_dsp:
 	iounmap(mbox_base);
 	return ret;
@@ -345,7 +432,12 @@ static int __devexit omap2_mbox_remove(struct platform_device *pdev)
 #if defined(CONFIG_ARCH_OMAP2420)
 	omap_mbox_unregister(&mbox_iva_info);
 #endif
-	omap_mbox_unregister(&mbox_dsp_info);
+
+	if (cpu_is_omap44xx()) {
+		omap_mbox_unregister(&mbox_2_info);
+		omap_mbox_unregister(&mbox_1_info);
+	} else
+		omap_mbox_unregister(&mbox_dsp_info);
 	iounmap(mbox_base);
 	return 0;
 }
@@ -354,7 +446,7 @@ static struct platform_driver omap2_mbox_driver = {
 	.probe = omap2_mbox_probe,
 	.remove = __devexit_p(omap2_mbox_remove),
 	.driver = {
-		.name = "omap2-mailbox",
+		.name = DRV_NAME,
 	},
 };
 
@@ -372,6 +464,6 @@ module_init(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("omap mailbox: omap2/3 architecture specific functions");
+MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions");
 MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, Paul Mundt");
-MODULE_ALIAS("platform:omap2-mailbox");
+MODULE_ALIAS("platform:"DRV_NAME);
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a846aa1ebb4d..baa451733850 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -18,10 +18,10 @@
 #include <linux/platform_device.h>
 
 #include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mux.h>
-#include <mach/cpu.h>
-#include <mach/mcbsp.h>
+#include <plat/dma.h>
+#include <plat/mux.h>
+#include <plat/cpu.h>
+#include <plat/mcbsp.h>
 
 static void omap2_mcbsp2_mux_setup(void)
 {
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index c9c59a2db4e2..0c3c72d934bf 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -20,9 +20,9 @@
 #include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
-#include <mach/control.h>
-#include <mach/mmc.h>
-#include <mach/board.h>
+#include <plat/control.h>
+#include <plat/mmc.h>
+#include <plat/board.h>
 
 #include "mmc-twl4030.h"
 
@@ -213,7 +213,7 @@ static int twl4030_mmc_get_context_loss(struct device *dev)
 static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
-	u32 reg;
+	u32 reg, prog_io;
 	int ret = 0;
 	struct twl_mmc_controller *c = &hsmmc[0];
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
@@ -245,7 +245,14 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 		}
 
 		reg = omap_ctrl_readl(control_pbias_offset);
-		reg |= OMAP2_PBIASSPEEDCTRL0;
+		if (cpu_is_omap3630()) {
+			/* Set MMC I/O to 52Mhz */
+			prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
+			prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
+			omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
+		} else {
+			reg |= OMAP2_PBIASSPEEDCTRL0;
+		}
 		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
 		omap_ctrl_writel(reg, control_pbias_offset);
 
@@ -489,6 +496,12 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 			/* on-chip level shifting via PBIAS0/PBIAS1 */
 			mmc->slots[0].set_power = twl_mmc1_set_power;
 			mmc->slots[0].set_sleep = twl_mmc1_set_sleep;
+
+			/* Omap3630 HSMMC1 supports only 4-bit */
+			if (cpu_is_omap3630() && c->wires > 4) {
+				c->wires = 4;
+				mmc->slots[0].wires = c->wires;
+			}
 			break;
 		case 2:
 			if (c->ext_clock)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index b5fac32aae70..e071b3fd1878 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -27,19 +27,52 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
 
 #include <asm/system.h>
 
-#include <mach/control.h>
-#include <mach/mux.h>
+#include <plat/control.h>
+#include <plat/mux.h>
 
-#ifdef CONFIG_OMAP_MUX
+#include "mux.h"
+
+#define OMAP_MUX_BASE_OFFSET		0x30	/* Offset from CTRL_BASE */
+#define OMAP_MUX_BASE_SZ		0x5ca
+
+struct omap_mux_entry {
+	struct omap_mux		mux;
+	struct list_head	node;
+};
+
+static unsigned long mux_phys;
+static void __iomem *mux_base;
+
+static inline u16 omap_mux_read(u16 reg)
+{
+	if (cpu_is_omap24xx())
+		return __raw_readb(mux_base + reg);
+	else
+		return __raw_readw(mux_base + reg);
+}
+
+static inline void omap_mux_write(u16 val, u16 reg)
+{
+	if (cpu_is_omap24xx())
+		__raw_writeb(val, mux_base + reg);
+	else
+		__raw_writew(val, mux_base + reg);
+}
+
+#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
 
 static struct omap_mux_cfg arch_mux_cfg;
 
 /* NOTE: See mux.h for the enumeration */
 
-#ifdef CONFIG_ARCH_OMAP24XX
 static struct pin_config __initdata_or_module omap24xx_pins[] = {
 /*
  *	description			mux	mux	pull	pull	debug
@@ -249,327 +282,14 @@ MUX_CFG_24XX("AF19_2430_GPIO_85",	0x0113,	3,	0,	0,	1)
 
 #define OMAP24XX_PINS_SZ	ARRAY_SIZE(omap24xx_pins)
 
-#else
-#define omap24xx_pins		NULL
-#define OMAP24XX_PINS_SZ	0
-#endif	/* CONFIG_ARCH_OMAP24XX */
-
-#ifdef CONFIG_ARCH_OMAP34XX
-static struct pin_config __initdata_or_module omap34xx_pins[] = {
-/*
- *		Name, reg-offset,
- *		mux-mode | [active-mode | off-mode]
- */
-
-/* 34xx I2C */
-MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
-MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
-MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* TLL - HSUSB: 12-pin TLL Port 1*/
-MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* TLL - HSUSB: 12-pin TLL Port 2*/
-MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* TLL - HSUSB: 12-pin TLL Port 3*/
-MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
-MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
-
-/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
-MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
-
-/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
-MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
-
-
-/* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix.
- * (Always specify PIN_INPUT, except for names suffixed by "_OUT".)
- * No internal pullup/pulldown without "_UP" or "_DOWN" suffix.
- */
-MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-
-/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
-MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
-
-/* MMC1 */
-MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* MMC2 */
-MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* MMC3 */
-MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* SYS_NIRQ T2 INT1 */
-MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
-		OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
-		OMAP34XX_MUX_MODE0)
-};
-
-#define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
-
-#else
-#define omap34xx_pins		NULL
-#define OMAP34XX_PINS_SZ	0
-#endif	/* CONFIG_ARCH_OMAP34XX */
-
 #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+
 static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg)
 {
 	u16 orig;
 	u8 warn = 0, debug = 0;
 
-	if (cpu_is_omap24xx())
-		orig = omap_ctrl_readb(cfg->mux_reg);
-	else
-		orig = omap_ctrl_readw(cfg->mux_reg);
+	orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
 
 #ifdef	CONFIG_OMAP_MUX_DEBUG
 	debug = cfg->debug;
@@ -585,7 +305,6 @@ static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 r
 #define omap2_cfg_debug(x, y)	do {} while (0)
 #endif
 
-#ifdef CONFIG_ARCH_OMAP24XX
 static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
@@ -599,47 +318,692 @@ static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
 	if (cfg->pu_pd_val)
 		reg |= OMAP2_PULL_UP;
 	omap2_cfg_debug(cfg, reg);
-	omap_ctrl_writeb(reg, cfg->mux_reg);
+	omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
 	spin_unlock_irqrestore(&mux_spin_lock, flags);
 
 	return 0;
 }
+
+int __init omap2_mux_init(void)
+{
+	u32 mux_pbase;
+
+	if (cpu_is_omap2420())
+		mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
+	else if (cpu_is_omap2430())
+		mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
+	else
+		return -ENODEV;
+
+	mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ);
+	if (!mux_base) {
+		printk(KERN_ERR "mux: Could not ioremap\n");
+		return -ENODEV;
+	}
+
+	if (cpu_is_omap24xx()) {
+		arch_mux_cfg.pins	= omap24xx_pins;
+		arch_mux_cfg.size	= OMAP24XX_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap24xx_cfg_reg;
+
+		return omap_mux_register(&arch_mux_cfg);
+	}
+
+	return 0;
+}
+
 #else
-#define omap24xx_cfg_reg	NULL
-#endif
+int __init omap2_mux_init(void)
+{
+	return 0;
+}
+#endif	/* CONFIG_OMAP_MUX */
+
+/*----------------------------------------------------------------------------*/
 
 #ifdef CONFIG_ARCH_OMAP34XX
-static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg)
+static LIST_HEAD(muxmodes);
+static DEFINE_MUTEX(muxmode_mutex);
+
+#ifdef CONFIG_OMAP_MUX
+
+static char *omap_mux_options;
+
+int __init omap_mux_init_gpio(int gpio, int val)
 {
-	static DEFINE_SPINLOCK(mux_spin_lock);
-	unsigned long flags;
-	u16 reg = 0;
+	struct omap_mux_entry *e;
+	int found = 0;
+
+	if (!gpio)
+		return -EINVAL;
+
+	list_for_each_entry(e, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+		if (gpio == m->gpio) {
+			u16 old_mode;
+			u16 mux_mode;
+
+			old_mode = omap_mux_read(m->reg_offset);
+			mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
+			mux_mode |= OMAP_MUX_MODE4;
+			printk(KERN_DEBUG "mux: Setting signal "
+				"%s.gpio%i 0x%04x -> 0x%04x\n",
+				m->muxnames[0], gpio, old_mode, mux_mode);
+			omap_mux_write(mux_mode, m->reg_offset);
+			found++;
+		}
+	}
 
-	spin_lock_irqsave(&mux_spin_lock, flags);
-	reg |= cfg->mux_val;
-	omap2_cfg_debug(cfg, reg);
-	omap_ctrl_writew(reg, cfg->mux_reg);
-	spin_unlock_irqrestore(&mux_spin_lock, flags);
+	if (found == 1)
+		return 0;
+
+	if (found > 1) {
+		printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio);
+		return -EINVAL;
+	}
+
+	printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+
+	return -ENODEV;
+}
+
+int __init omap_mux_init_signal(char *muxname, int val)
+{
+	struct omap_mux_entry *e;
+	char *m0_name = NULL, *mode_name = NULL;
+	int found = 0;
+
+	mode_name = strchr(muxname, '.');
+	if (mode_name) {
+		*mode_name = '\0';
+		mode_name++;
+		m0_name = muxname;
+	} else {
+		mode_name = muxname;
+	}
+
+	list_for_each_entry(e, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+		char *m0_entry = m->muxnames[0];
+		int i;
+
+		if (m0_name && strcmp(m0_name, m0_entry))
+			continue;
+
+		for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
+			char *mode_cur = m->muxnames[i];
+
+			if (!mode_cur)
+				continue;
+
+			if (!strcmp(mode_name, mode_cur)) {
+				u16 old_mode;
+				u16 mux_mode;
+
+				old_mode = omap_mux_read(m->reg_offset);
+				mux_mode = val | i;
+				printk(KERN_DEBUG "mux: Setting signal "
+					"%s.%s 0x%04x -> 0x%04x\n",
+					m0_entry, muxname, old_mode, mux_mode);
+				omap_mux_write(mux_mode, m->reg_offset);
+				found++;
+			}
+		}
+	}
+
+	if (found == 1)
+		return 0;
+
+	if (found > 1) {
+		printk(KERN_ERR "mux: Multiple signal paths (%i) for %s\n",
+				found, muxname);
+		return -EINVAL;
+	}
+
+	printk(KERN_ERR "mux: Could not set signal %s\n", muxname);
+
+	return -ENODEV;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+#define OMAP_MUX_MAX_NR_FLAGS	10
+#define OMAP_MUX_TEST_FLAG(val, mask)				\
+	if (((val) & (mask)) == (mask)) {			\
+		i++;						\
+		flags[i] =  #mask;				\
+	}
+
+/* REVISIT: Add checking for non-optimal mux settings */
+static inline void omap_mux_decode(struct seq_file *s, u16 val)
+{
+	char *flags[OMAP_MUX_MAX_NR_FLAGS];
+	char mode[14];
+	int i = -1;
+
+	sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
+	i++;
+	flags[i] = mode;
+
+	OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE);
+	if (val & OMAP_OFF_EN) {
+		if (!(val & OMAP_OFFOUT_EN)) {
+			if (!(val & OMAP_OFF_PULL_UP)) {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_OFF_INPUT_PULLDOWN);
+			} else {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_OFF_INPUT_PULLUP);
+			}
+		} else {
+			if (!(val & OMAP_OFFOUT_VAL)) {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_OFF_OUTPUT_LOW);
+			} else {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_OFF_OUTPUT_HIGH);
+			}
+		}
+	}
+
+	if (val & OMAP_INPUT_EN) {
+		if (val & OMAP_PULL_ENA) {
+			if (!(val & OMAP_PULL_UP)) {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_INPUT_PULLDOWN);
+			} else {
+				OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP);
+			}
+		} else {
+			OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT);
+		}
+	} else {
+		i++;
+		flags[i] = "OMAP_PIN_OUTPUT";
+	}
+
+	do {
+		seq_printf(s, "%s", flags[i]);
+		if (i > 0)
+			seq_printf(s, " | ");
+	} while (i-- > 0);
+}
+
+#define OMAP_MUX_DEFNAME_LEN	16
+
+static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
+{
+	struct omap_mux_entry *e;
+
+	list_for_each_entry(e, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+		char m0_def[OMAP_MUX_DEFNAME_LEN];
+		char *m0_name = m->muxnames[0];
+		u16 val;
+		int i, mode;
+
+		if (!m0_name)
+			continue;
+
+		for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
+			if (m0_name[i] == '\0') {
+				m0_def[i] = m0_name[i];
+				break;
+			}
+			m0_def[i] = toupper(m0_name[i]);
+		}
+		val = omap_mux_read(m->reg_offset);
+		mode = val & OMAP_MUX_MODE7;
+
+		seq_printf(s, "OMAP%i_MUX(%s, ",
+					cpu_is_omap34xx() ? 3 : 0, m0_def);
+		omap_mux_decode(s, val);
+		seq_printf(s, "),\n");
+	}
+
+	return 0;
+}
+
+static int omap_mux_dbg_board_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, omap_mux_dbg_board_show, &inode->i_private);
+}
+
+static const struct file_operations omap_mux_dbg_board_fops = {
+	.open		= omap_mux_dbg_board_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused)
+{
+	struct omap_mux *m = s->private;
+	const char *none = "NA";
+	u16 val;
+	int mode;
+
+	val = omap_mux_read(m->reg_offset);
+	mode = val & OMAP_MUX_MODE7;
+
+	seq_printf(s, "name: %s.%s (0x%08lx/0x%03x = 0x%04x), b %s, t %s\n",
+			m->muxnames[0], m->muxnames[mode],
+			mux_phys + m->reg_offset, m->reg_offset, val,
+			m->balls[0] ? m->balls[0] : none,
+			m->balls[1] ? m->balls[1] : none);
+	seq_printf(s, "mode: ");
+	omap_mux_decode(s, val);
+	seq_printf(s, "\n");
+	seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n",
+			m->muxnames[0] ? m->muxnames[0] : none,
+			m->muxnames[1] ? m->muxnames[1] : none,
+			m->muxnames[2] ? m->muxnames[2] : none,
+			m->muxnames[3] ? m->muxnames[3] : none,
+			m->muxnames[4] ? m->muxnames[4] : none,
+			m->muxnames[5] ? m->muxnames[5] : none,
+			m->muxnames[6] ? m->muxnames[6] : none,
+			m->muxnames[7] ? m->muxnames[7] : none);
 
 	return 0;
 }
+
+#define OMAP_MUX_MAX_ARG_CHAR  7
+
+static ssize_t omap_mux_dbg_signal_write(struct file *file,
+						const char __user *user_buf,
+						size_t count, loff_t *ppos)
+{
+	char buf[OMAP_MUX_MAX_ARG_CHAR];
+	struct seq_file *seqf;
+	struct omap_mux *m;
+	unsigned long val;
+	int buf_size, ret;
+
+	if (count > OMAP_MUX_MAX_ARG_CHAR)
+		return -EINVAL;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) - 1);
+
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+
+	ret = strict_strtoul(buf, 0x10, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val > 0xffff)
+		return -EINVAL;
+
+	seqf = file->private_data;
+	m = seqf->private;
+
+	omap_mux_write((u16)val, m->reg_offset);
+	*ppos += count;
+
+	return count;
+}
+
+static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, omap_mux_dbg_signal_show, inode->i_private);
+}
+
+static const struct file_operations omap_mux_dbg_signal_fops = {
+	.open		= omap_mux_dbg_signal_open,
+	.read		= seq_read,
+	.write		= omap_mux_dbg_signal_write,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static struct dentry *mux_dbg_dir;
+
+static void __init omap_mux_dbg_init(void)
+{
+	struct omap_mux_entry *e;
+
+	mux_dbg_dir = debugfs_create_dir("omap_mux", NULL);
+	if (!mux_dbg_dir)
+		return;
+
+	(void)debugfs_create_file("board", S_IRUGO, mux_dbg_dir,
+					NULL, &omap_mux_dbg_board_fops);
+
+	list_for_each_entry(e, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+
+		(void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir,
+					m, &omap_mux_dbg_signal_fops);
+	}
+}
+
 #else
-#define omap34xx_cfg_reg	NULL
+static inline void omap_mux_dbg_init(void)
+{
+}
+#endif	/* CONFIG_DEBUG_FS */
+
+static void __init omap_mux_free_names(struct omap_mux *m)
+{
+	int i;
+
+	for (i = 0; i < OMAP_MUX_NR_MODES; i++)
+		kfree(m->muxnames[i]);
+
+#ifdef CONFIG_DEBUG_FS
+	for (i = 0; i < OMAP_MUX_NR_SIDES; i++)
+		kfree(m->balls[i]);
 #endif
 
-int __init omap2_mux_init(void)
+}
+
+/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */
+static int __init omap_mux_late_init(void)
 {
-	if (cpu_is_omap24xx()) {
-		arch_mux_cfg.pins	= omap24xx_pins;
-		arch_mux_cfg.size	= OMAP24XX_PINS_SZ;
-		arch_mux_cfg.cfg_reg	= omap24xx_cfg_reg;
-	} else if (cpu_is_omap34xx()) {
-		arch_mux_cfg.pins	= omap34xx_pins;
-		arch_mux_cfg.size	= OMAP34XX_PINS_SZ;
-		arch_mux_cfg.cfg_reg	= omap34xx_cfg_reg;
+	struct omap_mux_entry *e, *tmp;
+
+	list_for_each_entry_safe(e, tmp, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+		u16 mode = omap_mux_read(m->reg_offset);
+
+		if (OMAP_MODE_GPIO(mode))
+			continue;
+
+#ifndef CONFIG_DEBUG_FS
+		mutex_lock(&muxmode_mutex);
+		list_del(&e->node);
+		mutex_unlock(&muxmode_mutex);
+		omap_mux_free_names(m);
+		kfree(m);
+#endif
+
+	}
+
+	omap_mux_dbg_init();
+
+	return 0;
+}
+late_initcall(omap_mux_late_init);
+
+static void __init omap_mux_package_fixup(struct omap_mux *p,
+					struct omap_mux *superset)
+{
+	while (p->reg_offset !=  OMAP_MUX_TERMINATOR) {
+		struct omap_mux *s = superset;
+		int found = 0;
+
+		while (s->reg_offset != OMAP_MUX_TERMINATOR) {
+			if (s->reg_offset == p->reg_offset) {
+				*s = *p;
+				found++;
+				break;
+			}
+			s++;
+		}
+		if (!found)
+			printk(KERN_ERR "mux: Unknown entry offset 0x%x\n",
+					p->reg_offset);
+		p++;
+	}
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+static void __init omap_mux_package_init_balls(struct omap_ball *b,
+				struct omap_mux *superset)
+{
+	while (b->reg_offset != OMAP_MUX_TERMINATOR) {
+		struct omap_mux *s = superset;
+		int found = 0;
+
+		while (s->reg_offset != OMAP_MUX_TERMINATOR) {
+			if (s->reg_offset == b->reg_offset) {
+				s->balls[0] = b->balls[0];
+				s->balls[1] = b->balls[1];
+				found++;
+				break;
+			}
+			s++;
+		}
+		if (!found)
+			printk(KERN_ERR "mux: Unknown ball offset 0x%x\n",
+					b->reg_offset);
+		b++;
+	}
+}
+
+#else	/* CONFIG_DEBUG_FS */
+
+static inline void omap_mux_package_init_balls(struct omap_ball *b,
+					struct omap_mux *superset)
+{
+}
+
+#endif	/* CONFIG_DEBUG_FS */
+
+static int __init omap_mux_setup(char *options)
+{
+	if (!options)
+		return 0;
+
+	omap_mux_options = options;
+
+	return 1;
+}
+__setup("omap_mux=", omap_mux_setup);
+
+/*
+ * Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234
+ * cmdline options only override the bootloader values.
+ * During development, please enable CONFIG_DEBUG_FS, and use the
+ * signal specific entries under debugfs.
+ */
+static void __init omap_mux_set_cmdline_signals(void)
+{
+	char *options, *next_opt, *token;
+
+	if (!omap_mux_options)
+		return;
+
+	options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL);
+	if (!options)
+		return;
+
+	strcpy(options, omap_mux_options);
+	next_opt = options;
+
+	while ((token = strsep(&next_opt, ",")) != NULL) {
+		char *keyval, *name;
+		unsigned long val;
+
+		keyval = token;
+		name = strsep(&keyval, "=");
+		if (name) {
+			int res;
+
+			res = strict_strtoul(keyval, 0x10, &val);
+			if (res < 0)
+				continue;
+
+			omap_mux_init_signal(name, (u16)val);
+		}
+	}
+
+	kfree(options);
+}
+
+static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
+{
+	while (board_mux->reg_offset !=  OMAP_MUX_TERMINATOR) {
+		omap_mux_write(board_mux->value, board_mux->reg_offset);
+		board_mux++;
+	}
+}
+
+static int __init omap_mux_copy_names(struct omap_mux *src,
+					struct omap_mux *dst)
+{
+	int i;
+
+	for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
+		if (src->muxnames[i]) {
+			dst->muxnames[i] =
+				kmalloc(strlen(src->muxnames[i]) + 1,
+					GFP_KERNEL);
+			if (!dst->muxnames[i])
+				goto free;
+			strcpy(dst->muxnames[i], src->muxnames[i]);
+		}
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	for (i = 0; i < OMAP_MUX_NR_SIDES; i++) {
+		if (src->balls[i]) {
+			dst->balls[i] =
+				kmalloc(strlen(src->balls[i]) + 1,
+					GFP_KERNEL);
+			if (!dst->balls[i])
+				goto free;
+			strcpy(dst->balls[i], src->balls[i]);
+		}
+	}
+#endif
+
+	return 0;
+
+free:
+	omap_mux_free_names(dst);
+	return -ENOMEM;
+
+}
+
+#endif	/* CONFIG_OMAP_MUX */
+
+static u16 omap_mux_get_by_gpio(int gpio)
+{
+	struct omap_mux_entry *e;
+	u16 offset = OMAP_MUX_TERMINATOR;
+
+	list_for_each_entry(e, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+		if (m->gpio == gpio) {
+			offset = m->reg_offset;
+			break;
+		}
+	}
+
+	return offset;
+}
+
+/* Needed for dynamic muxing of GPIO pins for off-idle */
+u16 omap_mux_get_gpio(int gpio)
+{
+	u16 offset;
+
+	offset = omap_mux_get_by_gpio(gpio);
+	if (offset == OMAP_MUX_TERMINATOR) {
+		printk(KERN_ERR "mux: Could not get gpio%i\n", gpio);
+		return offset;
+	}
+
+	return omap_mux_read(offset);
+}
+
+/* Needed for dynamic muxing of GPIO pins for off-idle */
+void omap_mux_set_gpio(u16 val, int gpio)
+{
+	u16 offset;
+
+	offset = omap_mux_get_by_gpio(gpio);
+	if (offset == OMAP_MUX_TERMINATOR) {
+		printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+		return;
+	}
+
+	omap_mux_write(val, offset);
+}
+
+static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src)
+{
+	struct omap_mux_entry *entry;
+	struct omap_mux *m;
+
+	entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL);
+	if (!entry)
+		return NULL;
+
+	m = &entry->mux;
+	memcpy(m, src, sizeof(struct omap_mux_entry));
+
+#ifdef CONFIG_OMAP_MUX
+	if (omap_mux_copy_names(src, m)) {
+		kfree(entry);
+		return NULL;
 	}
+#endif
+
+	mutex_lock(&muxmode_mutex);
+	list_add_tail(&entry->node, &muxmodes);
+	mutex_unlock(&muxmode_mutex);
 
-	return omap_mux_register(&arch_mux_cfg);
+	return m;
 }
 
+/*
+ * Note if CONFIG_OMAP_MUX is not selected, we will only initialize
+ * the GPIO to mux offset mapping that is needed for dynamic muxing
+ * of GPIO pins for off-idle.
+ */
+static void __init omap_mux_init_list(struct omap_mux *superset)
+{
+	while (superset->reg_offset !=  OMAP_MUX_TERMINATOR) {
+		struct omap_mux *entry;
+
+#ifndef CONFIG_OMAP_MUX
+		/* Skip pins that are not muxed as GPIO by bootloader */
+		if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
+			superset++;
+			continue;
+		}
 #endif
+
+		entry = omap_mux_list_add(superset);
+		if (!entry) {
+			printk(KERN_ERR "mux: Could not add entry\n");
+			return;
+		}
+		superset++;
+	}
+}
+
+int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
+				struct omap_mux *superset,
+				struct omap_mux *package_subset,
+				struct omap_board_mux *board_mux,
+				struct omap_ball *package_balls)
+{
+	if (mux_base)
+		return -EBUSY;
+
+	mux_phys = mux_pbase;
+	mux_base = ioremap(mux_pbase, mux_size);
+	if (!mux_base) {
+		printk(KERN_ERR "mux: Could not ioremap\n");
+		return -ENODEV;
+	}
+
+#ifdef CONFIG_OMAP_MUX
+	omap_mux_package_fixup(package_subset, superset);
+	omap_mux_package_init_balls(package_balls, superset);
+	omap_mux_set_cmdline_signals();
+	omap_mux_set_board_signals(board_mux);
+#endif
+
+	omap_mux_init_list(superset);
+
+	return 0;
+}
+
+#endif	/* CONFIG_ARCH_OMAP34XX */
+
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
new file mode 100644
index 000000000000..d8b4d5ad2278
--- /dev/null
+++ b/arch/arm/mach-omap2/mux.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "mux34xx.h"
+
+#define OMAP_MUX_TERMINATOR	0xffff
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define OMAP_MUX_MODE0      0
+#define OMAP_MUX_MODE1      1
+#define OMAP_MUX_MODE2      2
+#define OMAP_MUX_MODE3      3
+#define OMAP_MUX_MODE4      4
+#define OMAP_MUX_MODE5      5
+#define OMAP_MUX_MODE6      6
+#define OMAP_MUX_MODE7      7
+
+/* 24xx/34xx mux bit defines */
+#define OMAP_PULL_ENA			(1 << 3)
+#define OMAP_PULL_UP			(1 << 4)
+#define OMAP_ALTELECTRICALSEL		(1 << 5)
+
+/* 34xx specific mux bit defines */
+#define OMAP_INPUT_EN			(1 << 8)
+#define OMAP_OFF_EN			(1 << 9)
+#define OMAP_OFFOUT_EN			(1 << 10)
+#define OMAP_OFFOUT_VAL			(1 << 11)
+#define OMAP_OFF_PULL_EN		(1 << 12)
+#define OMAP_OFF_PULL_UP		(1 << 13)
+#define OMAP_WAKEUP_EN			(1 << 14)
+
+/* Active pin states */
+#define OMAP_PIN_OUTPUT			0
+#define OMAP_PIN_INPUT			OMAP_INPUT_EN
+#define OMAP_PIN_INPUT_PULLUP		(OMAP_PULL_ENA | OMAP_INPUT_EN \
+						| OMAP_PULL_UP)
+#define OMAP_PIN_INPUT_PULLDOWN		(OMAP_PULL_ENA | OMAP_INPUT_EN)
+
+/* Off mode states */
+#define OMAP_PIN_OFF_NONE		0
+#define OMAP_PIN_OFF_OUTPUT_HIGH	(OMAP_OFF_EN | OMAP_OFFOUT_EN \
+						| OMAP_OFFOUT_VAL)
+#define OMAP_PIN_OFF_OUTPUT_LOW		(OMAP_OFF_EN | OMAP_OFFOUT_EN)
+#define OMAP_PIN_OFF_INPUT_PULLUP	(OMAP_OFF_EN | OMAP_OFF_PULL_EN \
+						| OMAP_OFF_PULL_UP)
+#define OMAP_PIN_OFF_INPUT_PULLDOWN	(OMAP_OFF_EN | OMAP_OFF_PULL_EN)
+#define OMAP_PIN_OFF_WAKEUPENABLE	OMAP_WAKEUP_EN
+
+#define OMAP_MODE_GPIO(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+
+/* Flags for omap_mux_init */
+#define OMAP_PACKAGE_MASK		0xffff
+#define OMAP_PACKAGE_CBP		4		/* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CUS		3		/* 423-pin 0.65 */
+#define OMAP_PACKAGE_CBB		2		/* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CBC		1		/* 515-pin 0.50 0.65 */
+
+
+#define OMAP_MUX_NR_MODES	8			/* Available modes */
+#define OMAP_MUX_NR_SIDES	2			/* Bottom & top */
+
+/**
+ * struct omap_mux - data for omap mux register offset and it's value
+ * @reg_offset:	mux register offset from the mux base
+ * @gpio:	GPIO number
+ * @muxnames:	available signal modes for a ball
+ */
+struct omap_mux {
+	u16	reg_offset;
+	u16	gpio;
+#ifdef CONFIG_OMAP_MUX
+	char	*muxnames[OMAP_MUX_NR_MODES];
+#ifdef CONFIG_DEBUG_FS
+	char	*balls[OMAP_MUX_NR_SIDES];
+#endif
+#endif
+};
+
+/**
+ * struct omap_ball - data for balls on omap package
+ * @reg_offset:	mux register offset from the mux base
+ * @balls:	available balls on the package
+ */
+struct omap_ball {
+	u16	reg_offset;
+	char	*balls[OMAP_MUX_NR_SIDES];
+};
+
+/**
+ * struct omap_board_mux - data for initializing mux registers
+ * @reg_offset:	mux register offset from the mux base
+ * @mux_value:	desired mux value to set
+ */
+struct omap_board_mux {
+	u16	reg_offset;
+	u16	value;
+};
+
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX)
+
+/**
+ * omap_mux_init_gpio - initialize a signal based on the GPIO number
+ * @gpio:		GPIO number
+ * @val:		Options for the mux register value
+ */
+int omap_mux_init_gpio(int gpio, int val);
+
+/**
+ * omap_mux_init_signal - initialize a signal based on the signal name
+ * @muxname:		Mux name in mode0_name.signal_name format
+ * @val:		Options for the mux register value
+ */
+int omap_mux_init_signal(char *muxname, int val);
+
+#else
+
+static inline int omap_mux_init_gpio(int gpio, int val)
+{
+	return 0;
+}
+static inline int omap_mux_init_signal(char *muxname, int val)
+{
+	return 0;
+}
+
+#endif
+
+/**
+ * omap_mux_get_gpio() - get mux register value based on GPIO number
+ * @gpio:		GPIO number
+ *
+ */
+u16 omap_mux_get_gpio(int gpio);
+
+/**
+ * omap_mux_set_gpio() - set mux register value based on GPIO number
+ * @val:		New mux register value
+ * @gpio:		GPIO number
+ *
+ */
+void omap_mux_set_gpio(u16 val, int gpio);
+
+/**
+ * omap3_mux_init() - initialize mux system with board specific set
+ * @board_mux:		Board specific mux table
+ * @flags:		OMAP package type used for the board
+ */
+int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
+
+/**
+ * omap_mux_init - private mux init function, do not call
+ */
+int omap_mux_init(u32 mux_pbase, u32 mux_size,
+				struct omap_mux *superset,
+				struct omap_mux *package_subset,
+				struct omap_board_mux *board_mux,
+				struct omap_ball *package_balls);
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
new file mode 100644
index 000000000000..68e0a595f9a1
--- /dev/null
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -0,0 +1,2099 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "mux.h"
+
+#ifdef CONFIG_OMAP_MUX
+
+#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP3_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
+}
+
+#else
+
+#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP3_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+}
+
+#endif
+
+#define _OMAP3_BALLENTRY(M0, bb, bt)					\
+{									\
+	.reg_offset	= (OMAP3_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.balls		= { bb, bt },					\
+}
+
+/*
+ * Superset of all mux modes for omap3
+ */
+static struct omap_mux __initdata omap3_muxmodes[] = {
+	_OMAP3_MUXENTRY(CAM_D0, 99,
+		"cam_d0", NULL, NULL, NULL,
+		"gpio_99", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D1, 100,
+		"cam_d1", NULL, NULL, NULL,
+		"gpio_100", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D10, 109,
+		"cam_d10", NULL, NULL, NULL,
+		"gpio_109", "hw_dbg8", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D11, 110,
+		"cam_d11", NULL, NULL, NULL,
+		"gpio_110", "hw_dbg9", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D2, 101,
+		"cam_d2", NULL, NULL, NULL,
+		"gpio_101", "hw_dbg4", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D3, 102,
+		"cam_d3", NULL, NULL, NULL,
+		"gpio_102", "hw_dbg5", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D4, 103,
+		"cam_d4", NULL, NULL, NULL,
+		"gpio_103", "hw_dbg6", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D5, 104,
+		"cam_d5", NULL, NULL, NULL,
+		"gpio_104", "hw_dbg7", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D6, 105,
+		"cam_d6", NULL, NULL, NULL,
+		"gpio_105", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D7, 106,
+		"cam_d7", NULL, NULL, NULL,
+		"gpio_106", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D8, 107,
+		"cam_d8", NULL, NULL, NULL,
+		"gpio_107", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D9, 108,
+		"cam_d9", NULL, NULL, NULL,
+		"gpio_108", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_FLD, 98,
+		"cam_fld", NULL, "cam_global_reset", NULL,
+		"gpio_98", "hw_dbg3", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_HS, 94,
+		"cam_hs", NULL, NULL, NULL,
+		"gpio_94", "hw_dbg0", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_PCLK, 97,
+		"cam_pclk", NULL, NULL, NULL,
+		"gpio_97", "hw_dbg2", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_STROBE, 126,
+		"cam_strobe", NULL, NULL, NULL,
+		"gpio_126", "hw_dbg11", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_VS, 95,
+		"cam_vs", NULL, NULL, NULL,
+		"gpio_95", "hw_dbg1", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_WEN, 167,
+		"cam_wen", NULL, "cam_shutter", NULL,
+		"gpio_167", "hw_dbg10", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_XCLKA, 96,
+		"cam_xclka", NULL, NULL, NULL,
+		"gpio_96", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_XCLKB, 111,
+		"cam_xclkb", NULL, NULL, NULL,
+		"gpio_111", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CSI2_DX0, 112,
+		"csi2_dx0", NULL, NULL, NULL,
+		"gpio_112", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CSI2_DX1, 114,
+		"csi2_dx1", NULL, NULL, NULL,
+		"gpio_114", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CSI2_DY0, 113,
+		"csi2_dy0", NULL, NULL, NULL,
+		"gpio_113", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CSI2_DY1, 115,
+		"csi2_dy1", NULL, NULL, NULL,
+		"gpio_115", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_ACBIAS, 69,
+		"dss_acbias", NULL, NULL, NULL,
+		"gpio_69", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA0, 70,
+		"dss_data0", NULL, "uart1_cts", NULL,
+		"gpio_70", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA1, 71,
+		"dss_data1", NULL, "uart1_rts", NULL,
+		"gpio_71", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA10, 80,
+		"dss_data10", NULL, NULL, NULL,
+		"gpio_80", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA11, 81,
+		"dss_data11", NULL, NULL, NULL,
+		"gpio_81", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA12, 82,
+		"dss_data12", NULL, NULL, NULL,
+		"gpio_82", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA13, 83,
+		"dss_data13", NULL, NULL, NULL,
+		"gpio_83", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA14, 84,
+		"dss_data14", NULL, NULL, NULL,
+		"gpio_84", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA15, 85,
+		"dss_data15", NULL, NULL, NULL,
+		"gpio_85", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA16, 86,
+		"dss_data16", NULL, NULL, NULL,
+		"gpio_86", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA17, 87,
+		"dss_data17", NULL, NULL, NULL,
+		"gpio_87", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA18, 88,
+		"dss_data18", NULL, "mcspi3_clk", "dss_data0",
+		"gpio_88", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA19, 89,
+		"dss_data19", NULL, "mcspi3_simo", "dss_data1",
+		"gpio_89", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA20, 90,
+		"dss_data20", NULL, "mcspi3_somi", "dss_data2",
+		"gpio_90", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA21, 91,
+		"dss_data21", NULL, "mcspi3_cs0", "dss_data3",
+		"gpio_91", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA22, 92,
+		"dss_data22", NULL, "mcspi3_cs1", "dss_data4",
+		"gpio_92", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA23, 93,
+		"dss_data23", NULL, NULL, "dss_data5",
+		"gpio_93", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA2, 72,
+		"dss_data2", NULL, NULL, NULL,
+		"gpio_72", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA3, 73,
+		"dss_data3", NULL, NULL, NULL,
+		"gpio_73", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA4, 74,
+		"dss_data4", NULL, "uart3_rx_irrx", NULL,
+		"gpio_74", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA5, 75,
+		"dss_data5", NULL, "uart3_tx_irtx", NULL,
+		"gpio_75", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA6, 76,
+		"dss_data6", NULL, "uart1_tx", NULL,
+		"gpio_76", "hw_dbg14", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA7, 77,
+		"dss_data7", NULL, "uart1_rx", NULL,
+		"gpio_77", "hw_dbg15", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA8, 78,
+		"dss_data8", NULL, NULL, NULL,
+		"gpio_78", "hw_dbg16", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA9, 79,
+		"dss_data9", NULL, NULL, NULL,
+		"gpio_79", "hw_dbg17", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_HSYNC, 67,
+		"dss_hsync", NULL, NULL, NULL,
+		"gpio_67", "hw_dbg13", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_PCLK, 66,
+		"dss_pclk", NULL, NULL, NULL,
+		"gpio_66", "hw_dbg12", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_VSYNC, 68,
+		"dss_vsync", NULL, NULL, NULL,
+		"gpio_68", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(ETK_CLK, 12,
+		"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
+		"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", "hw_dbg0"),
+	_OMAP3_MUXENTRY(ETK_CTL, 13,
+		"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
+		"gpio_13", NULL, "hsusb1_tll_clk", "hw_dbg1"),
+	_OMAP3_MUXENTRY(ETK_D0, 14,
+		"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
+		"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", "hw_dbg2"),
+	_OMAP3_MUXENTRY(ETK_D1, 15,
+		"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
+		"gpio_15", "mm1_txse0", "hsusb1_tll_data1", "hw_dbg3"),
+	_OMAP3_MUXENTRY(ETK_D10, 24,
+		"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
+		"gpio_24", NULL, "hsusb2_tll_clk", "hw_dbg12"),
+	_OMAP3_MUXENTRY(ETK_D11, 25,
+		"etk_d11", NULL, NULL, "hsusb2_stp",
+		"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", "hw_dbg13"),
+	_OMAP3_MUXENTRY(ETK_D12, 26,
+		"etk_d12", NULL, NULL, "hsusb2_dir",
+		"gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
+	_OMAP3_MUXENTRY(ETK_D13, 27,
+		"etk_d13", NULL, NULL, "hsusb2_nxt",
+		"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", "hw_dbg15"),
+	_OMAP3_MUXENTRY(ETK_D14, 28,
+		"etk_d14", NULL, NULL, "hsusb2_data0",
+		"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", "hw_dbg16"),
+	_OMAP3_MUXENTRY(ETK_D15, 29,
+		"etk_d15", NULL, NULL, "hsusb2_data1",
+		"gpio_29", "mm2_txse0", "hsusb2_tll_data1", "hw_dbg17"),
+	_OMAP3_MUXENTRY(ETK_D2, 16,
+		"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
+		"gpio_16", "mm1_txdat", "hsusb1_tll_data2", "hw_dbg4"),
+	_OMAP3_MUXENTRY(ETK_D3, 17,
+		"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
+		"gpio_17", NULL, "hsusb1_tll_data7", "hw_dbg5"),
+	_OMAP3_MUXENTRY(ETK_D4, 18,
+		"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
+		"gpio_18", NULL, "hsusb1_tll_data4", "hw_dbg6"),
+	_OMAP3_MUXENTRY(ETK_D5, 19,
+		"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
+		"gpio_19", NULL, "hsusb1_tll_data5", "hw_dbg7"),
+	_OMAP3_MUXENTRY(ETK_D6, 20,
+		"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
+		"gpio_20", NULL, "hsusb1_tll_data6", "hw_dbg8"),
+	_OMAP3_MUXENTRY(ETK_D7, 21,
+		"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
+		"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", "hw_dbg9"),
+	_OMAP3_MUXENTRY(ETK_D8, 22,
+		"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
+		"gpio_22", NULL, "hsusb1_tll_dir", "hw_dbg10"),
+	_OMAP3_MUXENTRY(ETK_D9, 23,
+		"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
+		"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", "hw_dbg11"),
+	_OMAP3_MUXENTRY(GPMC_A1, 34,
+		"gpmc_a1", NULL, NULL, NULL,
+		"gpio_34", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A10, 43,
+		"gpmc_a10", "sys_ndmareq3", NULL, NULL,
+		"gpio_43", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A2, 35,
+		"gpmc_a2", NULL, NULL, NULL,
+		"gpio_35", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A3, 36,
+		"gpmc_a3", NULL, NULL, NULL,
+		"gpio_36", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A4, 37,
+		"gpmc_a4", NULL, NULL, NULL,
+		"gpio_37", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A5, 38,
+		"gpmc_a5", NULL, NULL, NULL,
+		"gpio_38", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A6, 39,
+		"gpmc_a6", NULL, NULL, NULL,
+		"gpio_39", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A7, 40,
+		"gpmc_a7", NULL, NULL, NULL,
+		"gpio_40", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A8, 41,
+		"gpmc_a8", NULL, NULL, NULL,
+		"gpio_41", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A9, 42,
+		"gpmc_a9", "sys_ndmareq2", NULL, NULL,
+		"gpio_42", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_CLK, 59,
+		"gpmc_clk", NULL, NULL, NULL,
+		"gpio_59", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D10, 46,
+		"gpmc_d10", NULL, NULL, NULL,
+		"gpio_46", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D11, 47,
+		"gpmc_d11", NULL, NULL, NULL,
+		"gpio_47", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D12, 48,
+		"gpmc_d12", NULL, NULL, NULL,
+		"gpio_48", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D13, 49,
+		"gpmc_d13", NULL, NULL, NULL,
+		"gpio_49", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D14, 50,
+		"gpmc_d14", NULL, NULL, NULL,
+		"gpio_50", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D15, 51,
+		"gpmc_d15", NULL, NULL, NULL,
+		"gpio_51", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D8, 44,
+		"gpmc_d8", NULL, NULL, NULL,
+		"gpio_44", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D9, 45,
+		"gpmc_d9", NULL, NULL, NULL,
+		"gpio_45", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NBE0_CLE, 60,
+		"gpmc_nbe0_cle", NULL, NULL, NULL,
+		"gpio_60", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NBE1, 61,
+		"gpmc_nbe1", NULL, NULL, NULL,
+		"gpio_61", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS1, 52,
+		"gpmc_ncs1", NULL, NULL, NULL,
+		"gpio_52", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS2, 53,
+		"gpmc_ncs2", NULL, NULL, NULL,
+		"gpio_53", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS3, 54,
+		"gpmc_ncs3", "sys_ndmareq0", NULL, NULL,
+		"gpio_54", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS4, 55,
+		"gpmc_ncs4", "sys_ndmareq1", "mcbsp4_clkx", "gpt9_pwm_evt",
+		"gpio_55", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS5, 56,
+		"gpmc_ncs5", "sys_ndmareq2", "mcbsp4_dr", "gpt10_pwm_evt",
+		"gpio_56", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS6, 57,
+		"gpmc_ncs6", "sys_ndmareq3", "mcbsp4_dx", "gpt11_pwm_evt",
+		"gpio_57", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS7, 58,
+		"gpmc_ncs7", "gpmc_io_dir", "mcbsp4_fsx", "gpt8_pwm_evt",
+		"gpio_58", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NWP, 62,
+		"gpmc_nwp", NULL, NULL, NULL,
+		"gpio_62", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_WAIT1, 63,
+		"gpmc_wait1", NULL, NULL, NULL,
+		"gpio_63", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_WAIT2, 64,
+		"gpmc_wait2", NULL, NULL, NULL,
+		"gpio_64", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_WAIT3, 65,
+		"gpmc_wait3", "sys_ndmareq1", NULL, NULL,
+		"gpio_65", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HDQ_SIO, 170,
+		"hdq_sio", "sys_altclk", "i2c2_sccbe", "i2c3_sccbe",
+		"gpio_170", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_CLK, 120,
+		"hsusb0_clk", NULL, NULL, NULL,
+		"gpio_120", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
+		"hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
+		"gpio_125", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
+		"hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
+		"gpio_130", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
+		"hsusb0_data2", NULL, "uart3_rts_sd", NULL,
+		"gpio_131", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
+		"hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
+		"gpio_169", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA4, 188,
+		"hsusb0_data4", NULL, NULL, NULL,
+		"gpio_188", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA5, 189,
+		"hsusb0_data5", NULL, NULL, NULL,
+		"gpio_189", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA6, 190,
+		"hsusb0_data6", NULL, NULL, NULL,
+		"gpio_190", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA7, 191,
+		"hsusb0_data7", NULL, NULL, NULL,
+		"gpio_191", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DIR, 122,
+		"hsusb0_dir", NULL, NULL, NULL,
+		"gpio_122", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_NXT, 124,
+		"hsusb0_nxt", NULL, NULL, NULL,
+		"gpio_124", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_STP, 121,
+		"hsusb0_stp", NULL, NULL, NULL,
+		"gpio_121", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(I2C2_SCL, 168,
+		"i2c2_scl", NULL, NULL, NULL,
+		"gpio_168", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(I2C2_SDA, 183,
+		"i2c2_sda", NULL, NULL, NULL,
+		"gpio_183", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(I2C3_SCL, 184,
+		"i2c3_scl", NULL, NULL, NULL,
+		"gpio_184", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(I2C3_SDA, 185,
+		"i2c3_sda", NULL, NULL, NULL,
+		"gpio_185", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(I2C4_SCL, 0,
+		"i2c4_scl", "sys_nvmode1", NULL, NULL,
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(I2C4_SDA, 0,
+		"i2c4_sda", "sys_nvmode2", NULL, NULL,
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(JTAG_EMU0, 11,
+		"jtag_emu0", NULL, NULL, NULL,
+		"gpio_11", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(JTAG_EMU1, 31,
+		"jtag_emu1", NULL, NULL, NULL,
+		"gpio_31", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
+		"mcbsp1_clkr", "mcspi4_clk", NULL, NULL,
+		"gpio_156", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_CLKX, 162,
+		"mcbsp1_clkx", NULL, "mcbsp3_clkx", NULL,
+		"gpio_162", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_DR, 159,
+		"mcbsp1_dr", "mcspi4_somi", "mcbsp3_dr", NULL,
+		"gpio_159", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_DX, 158,
+		"mcbsp1_dx", "mcspi4_simo", "mcbsp3_dx", NULL,
+		"gpio_158", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_FSR, 157,
+		"mcbsp1_fsr", NULL, "cam_global_reset", NULL,
+		"gpio_157", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_FSX, 161,
+		"mcbsp1_fsx", "mcspi4_cs0", "mcbsp3_fsx", NULL,
+		"gpio_161", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP2_CLKX, 117,
+		"mcbsp2_clkx", NULL, NULL, NULL,
+		"gpio_117", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP2_DR, 118,
+		"mcbsp2_dr", NULL, NULL, NULL,
+		"gpio_118", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP2_DX, 119,
+		"mcbsp2_dx", NULL, NULL, NULL,
+		"gpio_119", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP2_FSX, 116,
+		"mcbsp2_fsx", NULL, NULL, NULL,
+		"gpio_116", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
+		"mcbsp3_clkx", "uart2_tx", NULL, NULL,
+		"gpio_142", "hsusb3_tll_data6", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_DR, 141,
+		"mcbsp3_dr", "uart2_rts", NULL, NULL,
+		"gpio_141", "hsusb3_tll_data5", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_DX, 140,
+		"mcbsp3_dx", "uart2_cts", NULL, NULL,
+		"gpio_140", "hsusb3_tll_data4", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_FSX, 143,
+		"mcbsp3_fsx", "uart2_rx", NULL, NULL,
+		"gpio_143", "hsusb3_tll_data7", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
+		"mcbsp4_clkx", NULL, NULL, NULL,
+		"gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_DR, 153,
+		"mcbsp4_dr", NULL, NULL, NULL,
+		"gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_DX, 154,
+		"mcbsp4_dx", NULL, NULL, NULL,
+		"gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_FSX, 155,
+		"mcbsp4_fsx", NULL, NULL, NULL,
+		"gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP_CLKS, 160,
+		"mcbsp_clks", NULL, "cam_shutter", NULL,
+		"gpio_160", "uart1_cts", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_CLK, 171,
+		"mcspi1_clk", "sdmmc2_dat4", NULL, NULL,
+		"gpio_171", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_CS0, 174,
+		"mcspi1_cs0", "sdmmc2_dat7", NULL, NULL,
+		"gpio_174", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_CS1, 175,
+		"mcspi1_cs1", NULL, NULL, "sdmmc3_cmd",
+		"gpio_175", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_CS2, 176,
+		"mcspi1_cs2", NULL, NULL, "sdmmc3_clk",
+		"gpio_176", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_CS3, 177,
+		"mcspi1_cs3", NULL, "hsusb2_tll_data2", "hsusb2_data2",
+		"gpio_177", "mm2_txdat", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_SIMO, 172,
+		"mcspi1_simo", "sdmmc2_dat5", NULL, NULL,
+		"gpio_172", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_SOMI, 173,
+		"mcspi1_somi", "sdmmc2_dat6", NULL, NULL,
+		"gpio_173", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI2_CLK, 178,
+		"mcspi2_clk", NULL, "hsusb2_tll_data7", "hsusb2_data7",
+		"gpio_178", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI2_CS0, 181,
+		"mcspi2_cs0", "gpt11_pwm_evt",
+		"hsusb2_tll_data6", "hsusb2_data6",
+		"gpio_181", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI2_CS1, 182,
+		"mcspi2_cs1", "gpt8_pwm_evt",
+		"hsusb2_tll_data3", "hsusb2_data3",
+		"gpio_182", "mm2_txen_n", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI2_SIMO, 179,
+		"mcspi2_simo", "gpt9_pwm_evt",
+		"hsusb2_tll_data4", "hsusb2_data4",
+		"gpio_179", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI2_SOMI, 180,
+		"mcspi2_somi", "gpt10_pwm_evt",
+		"hsusb2_tll_data5", "hsusb2_data5",
+		"gpio_180", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_CLK, 120,
+		"sdmmc1_clk", NULL, NULL, NULL,
+		"gpio_120", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_CMD, 121,
+		"sdmmc1_cmd", NULL, NULL, NULL,
+		"gpio_121", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
+		"sdmmc1_dat0", NULL, NULL, NULL,
+		"gpio_122", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
+		"sdmmc1_dat1", NULL, NULL, NULL,
+		"gpio_123", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
+		"sdmmc1_dat2", NULL, NULL, NULL,
+		"gpio_124", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
+		"sdmmc1_dat3", NULL, NULL, NULL,
+		"gpio_125", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT4, 126,
+		"sdmmc1_dat4", NULL, "sim_io", NULL,
+		"gpio_126", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT5, 127,
+		"sdmmc1_dat5", NULL, "sim_clk", NULL,
+		"gpio_127", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT6, 128,
+		"sdmmc1_dat6", NULL, "sim_pwrctrl", NULL,
+		"gpio_128", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT7, 129,
+		"sdmmc1_dat7", NULL, "sim_rst", NULL,
+		"gpio_129", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_CLK, 130,
+		"sdmmc2_clk", "mcspi3_clk", NULL, NULL,
+		"gpio_130", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_CMD, 131,
+		"sdmmc2_cmd", "mcspi3_simo", NULL, NULL,
+		"gpio_131", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT0, 132,
+		"sdmmc2_dat0", "mcspi3_somi", NULL, NULL,
+		"gpio_132", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT1, 133,
+		"sdmmc2_dat1", NULL, NULL, NULL,
+		"gpio_133", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT2, 134,
+		"sdmmc2_dat2", "mcspi3_cs1", NULL, NULL,
+		"gpio_134", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT3, 135,
+		"sdmmc2_dat3", "mcspi3_cs0", NULL, NULL,
+		"gpio_135", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT4, 136,
+		"sdmmc2_dat4", "sdmmc2_dir_dat0", NULL, "sdmmc3_dat0",
+		"gpio_136", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
+		"sdmmc2_dat5", "sdmmc2_dir_dat1",
+		"cam_global_reset", "sdmmc3_dat1",
+		"gpio_137", "hsusb3_tll_stp", "mm3_rxdp", "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
+		"sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
+		"gpio_138", "hsusb3_tll_dir", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
+		"sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
+		"gpio_139", "hsusb3_tll_nxt", "mm3_rxdm", "safe_mode"),
+	_OMAP3_MUXENTRY(SDRC_CKE0, 0,
+		"sdrc_cke0", NULL, NULL, NULL,
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDRC_CKE1, 0,
+		"sdrc_cke1", NULL, NULL, NULL,
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT0, 2,
+		"sys_boot0", NULL, NULL, NULL,
+		"gpio_2", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT1, 3,
+		"sys_boot1", NULL, NULL, NULL,
+		"gpio_3", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT2, 4,
+		"sys_boot2", NULL, NULL, NULL,
+		"gpio_4", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT3, 5,
+		"sys_boot3", NULL, NULL, NULL,
+		"gpio_5", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT4, 6,
+		"sys_boot4", "sdmmc2_dir_dat2", NULL, NULL,
+		"gpio_6", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT5, 7,
+		"sys_boot5", "sdmmc2_dir_dat3", NULL, NULL,
+		"gpio_7", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT6, 8,
+		"sys_boot6", NULL, NULL, NULL,
+		"gpio_8", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_CLKOUT1, 10,
+		"sys_clkout1", NULL, NULL, NULL,
+		"gpio_10", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_CLKOUT2, 186,
+		"sys_clkout2", NULL, NULL, NULL,
+		"gpio_186", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_CLKREQ, 1,
+		"sys_clkreq", NULL, NULL, NULL,
+		"gpio_1", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_NIRQ, 0,
+		"sys_nirq", NULL, NULL, NULL,
+		"gpio_0", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_NRESWARM, 30,
+		"sys_nreswarm", NULL, NULL, NULL,
+		"gpio_30", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_OFF_MODE, 9,
+		"sys_off_mode", NULL, NULL, NULL,
+		"gpio_9", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_CTS, 150,
+		"uart1_cts", NULL, NULL, NULL,
+		"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_RTS, 149,
+		"uart1_rts", NULL, NULL, NULL,
+		"gpio_149", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_RX, 151,
+		"uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk",
+		"gpio_151", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_TX, 148,
+		"uart1_tx", NULL, NULL, NULL,
+		"gpio_148", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART2_CTS, 144,
+		"uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL,
+		"gpio_144", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART2_RTS, 145,
+		"uart2_rts", "mcbsp3_dr", "gpt10_pwm_evt", NULL,
+		"gpio_145", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART2_RX, 147,
+		"uart2_rx", "mcbsp3_fsx", "gpt8_pwm_evt", NULL,
+		"gpio_147", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART2_TX, 146,
+		"uart2_tx", "mcbsp3_clkx", "gpt11_pwm_evt", NULL,
+		"gpio_146", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART3_CTS_RCTX, 163,
+		"uart3_cts_rctx", NULL, NULL, NULL,
+		"gpio_163", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART3_RTS_SD, 164,
+		"uart3_rts_sd", NULL, NULL, NULL,
+		"gpio_164", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART3_RX_IRRX, 165,
+		"uart3_rx_irrx", NULL, NULL, NULL,
+		"gpio_165", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
+		"uart3_tx_irtx", NULL, NULL, NULL,
+		"gpio_166", NULL, NULL, "safe_mode"),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Signals different on CBC package compared to the superset
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC)
+struct omap_mux __initdata omap3_cbc_subset[] = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbc_subset	NULL
+#endif
+
+/*
+ * Balls for CBC package
+ * 515-pin s-PBGA Package, 0.65mm Ball Pitch (Top), 0.50mm Ball Pitch (Bottom)
+ *
+ * FIXME: What's up with the outdated TI documentation? See:
+ *
+ * http://wiki.davincidsp.com/index.php/Datasheet_Errata_for_OMAP35x_CBC_Package
+ * http://community.ti.com/forums/t/10982.aspx
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)	\
+		&& defined(CONFIG_OMAP_PACKAGE_CBC)
+struct omap_ball __initdata omap3_cbc_ball[] = {
+	_OMAP3_BALLENTRY(CAM_D0, "ae16", NULL),
+	_OMAP3_BALLENTRY(CAM_D1, "ae15", NULL),
+	_OMAP3_BALLENTRY(CAM_D10, "d25", NULL),
+	_OMAP3_BALLENTRY(CAM_D11, "e26", NULL),
+	_OMAP3_BALLENTRY(CAM_D2, "a24", NULL),
+	_OMAP3_BALLENTRY(CAM_D3, "b24", NULL),
+	_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
+	_OMAP3_BALLENTRY(CAM_D5, "c24", NULL),
+	_OMAP3_BALLENTRY(CAM_D6, "p25", NULL),
+	_OMAP3_BALLENTRY(CAM_D7, "p26", NULL),
+	_OMAP3_BALLENTRY(CAM_D8, "n25", NULL),
+	_OMAP3_BALLENTRY(CAM_D9, "n26", NULL),
+	_OMAP3_BALLENTRY(CAM_FLD, "b23", NULL),
+	_OMAP3_BALLENTRY(CAM_HS, "c23", NULL),
+	_OMAP3_BALLENTRY(CAM_PCLK, "c26", NULL),
+	_OMAP3_BALLENTRY(CAM_STROBE, "d26", NULL),
+	_OMAP3_BALLENTRY(CAM_VS, "d23", NULL),
+	_OMAP3_BALLENTRY(CAM_WEN, "a23", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKB, "e25", NULL),
+	_OMAP3_BALLENTRY(CSI2_DX0, "ad17", NULL),
+	_OMAP3_BALLENTRY(CSI2_DX1, "ae18", NULL),
+	_OMAP3_BALLENTRY(CSI2_DY0, "ad16", NULL),
+	_OMAP3_BALLENTRY(CSI2_DY1, "ae17", NULL),
+	_OMAP3_BALLENTRY(DSS_ACBIAS, "f26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA0, "ae21", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA1, "ae22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA10, "ac26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA11, "ad26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA12, "aa25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA13, "y25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA14, "aa26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA15, "ab26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA16, "l25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA17, "l26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA18, "m24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA19, "m26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA2, "ae23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA20, "f25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA21, "n24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA22, "ac25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA23, "ab25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA3, "ae24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA4, "ad23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA5, "ad24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA6, "g26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA7, "h25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA8, "h26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA9, "j26", NULL),
+	_OMAP3_BALLENTRY(DSS_HSYNC, "k24", NULL),
+	_OMAP3_BALLENTRY(DSS_PCLK, "g25", NULL),
+	_OMAP3_BALLENTRY(DSS_VSYNC, "m25", NULL),
+	_OMAP3_BALLENTRY(ETK_CLK, "ab2", NULL),
+	_OMAP3_BALLENTRY(ETK_CTL, "ab3", NULL),
+	_OMAP3_BALLENTRY(ETK_D0, "ac3", NULL),
+	_OMAP3_BALLENTRY(ETK_D1, "ad4", NULL),
+	_OMAP3_BALLENTRY(ETK_D10, "ae4", NULL),
+	_OMAP3_BALLENTRY(ETK_D11, "af6", NULL),
+	_OMAP3_BALLENTRY(ETK_D12, "ae6", NULL),
+	_OMAP3_BALLENTRY(ETK_D13, "af7", NULL),
+	_OMAP3_BALLENTRY(ETK_D14, "af9", NULL),
+	_OMAP3_BALLENTRY(ETK_D15, "ae9", NULL),
+	_OMAP3_BALLENTRY(ETK_D2, "ad3", NULL),
+	_OMAP3_BALLENTRY(ETK_D3, "aa3", NULL),
+	_OMAP3_BALLENTRY(ETK_D4, "y3", NULL),
+	_OMAP3_BALLENTRY(ETK_D5, "ab1", NULL),
+	_OMAP3_BALLENTRY(ETK_D6, "ae3", NULL),
+	_OMAP3_BALLENTRY(ETK_D7, "ad2", NULL),
+	_OMAP3_BALLENTRY(ETK_D8, "aa4", NULL),
+	_OMAP3_BALLENTRY(ETK_D9, "v2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A1, "j2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A10, "d2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A2, "h1", NULL),
+	_OMAP3_BALLENTRY(GPMC_A3, "h2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A4, "g2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A5, "f1", NULL),
+	_OMAP3_BALLENTRY(GPMC_A6, "f2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A7, "e1", NULL),
+	_OMAP3_BALLENTRY(GPMC_A8, "e2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A9, "d1", NULL),
+	_OMAP3_BALLENTRY(GPMC_CLK, "n1", "l1"),
+	_OMAP3_BALLENTRY(GPMC_D10, "t1", "n1"),
+	_OMAP3_BALLENTRY(GPMC_D11, "u2", "p2"),
+	_OMAP3_BALLENTRY(GPMC_D12, "u1", "p1"),
+	_OMAP3_BALLENTRY(GPMC_D13, "p1", "m1"),
+	_OMAP3_BALLENTRY(GPMC_D14, "l2", "j2"),
+	_OMAP3_BALLENTRY(GPMC_D15, "m2", "k2"),
+	_OMAP3_BALLENTRY(GPMC_D8, "v1", "r1"),
+	_OMAP3_BALLENTRY(GPMC_D9, "y1", "t1"),
+	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k2", NULL),
+	_OMAP3_BALLENTRY(GPMC_NBE1, "j1", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS1, "ad1", "w1"),
+	_OMAP3_BALLENTRY(GPMC_NCS2, "a3", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS3, "b6", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS4, "b4", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS5, "c4", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS6, "b5", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS7, "c5", NULL),
+	_OMAP3_BALLENTRY(GPMC_NWP, "ac6", "y5"),
+	_OMAP3_BALLENTRY(GPMC_WAIT1, "ac8", "y8"),
+	_OMAP3_BALLENTRY(GPMC_WAIT2, "b3", NULL),
+	_OMAP3_BALLENTRY(GPMC_WAIT3, "c6", NULL),
+	_OMAP3_BALLENTRY(HDQ_SIO, "j23", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_CLK, "w19", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA0, "v20", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA1, "y20", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA2, "v18", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA3, "w20", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA4, "w17", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA5, "y18", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA6, "y19", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA7, "y17", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DIR, "v19", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_NXT, "w18", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_STP, "u20", NULL),
+	_OMAP3_BALLENTRY(I2C2_SCL, "c2", NULL),
+	_OMAP3_BALLENTRY(I2C2_SDA, "c1", NULL),
+	_OMAP3_BALLENTRY(I2C3_SCL, "ab4", NULL),
+	_OMAP3_BALLENTRY(I2C3_SDA, "ac4", NULL),
+	_OMAP3_BALLENTRY(I2C4_SCL, "ad15", NULL),
+	_OMAP3_BALLENTRY(I2C4_SDA, "w16", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU0, "y15", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU1, "y14", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKR, "u19", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKX, "t17", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DR, "t20", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DX, "u17", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSR, "v17", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSX, "p20", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_CLKX, "r18", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DR, "t18", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DX, "r19", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_FSX, "u18", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_CLKX, "u3", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DR, "n3", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DX, "p3", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_FSX, "w3", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_CLKX, "v3", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_DR, "u4", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_DX, "r3", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_FSX, "t3", NULL),
+	_OMAP3_BALLENTRY(MCBSP_CLKS, "t19", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CLK, "p9", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS0, "r7", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS1, "r8", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS2, "r9", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS3, "t8", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SIMO, "p8", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SOMI, "p7", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CLK, "w7", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS0, "v8", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS1, "v9", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SIMO, "w8", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SOMI, "u8", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CLK, "n19", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CMD, "l18", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT0, "m19", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT1, "m18", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT2, "k18", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT3, "n20", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT4, "m20", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT5, "p17", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT6, "p18", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT7, "p19", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CLK, "w10", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CMD, "r10", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT0, "t10", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT1, "t9", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT2, "u10", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT3, "u9", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT4, "v10", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT5, "m3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT6, "l3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT7, "k3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT0, "f3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT1, "d3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT2, "c3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT3, "e3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT4, "e4", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT5, "g3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT6, "d4", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT1, "ae14", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT2, "w11", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKREQ, "w15", NULL),
+	_OMAP3_BALLENTRY(SYS_NIRQ, "v16", NULL),
+	_OMAP3_BALLENTRY(SYS_NRESWARM, "ad7", "aa5"),
+	_OMAP3_BALLENTRY(SYS_OFF_MODE, "v12", NULL),
+	_OMAP3_BALLENTRY(UART1_CTS, "w2", NULL),
+	_OMAP3_BALLENTRY(UART1_RTS, "r2", NULL),
+	_OMAP3_BALLENTRY(UART1_RX, "h3", NULL),
+	_OMAP3_BALLENTRY(UART1_TX, "l4", NULL),
+	_OMAP3_BALLENTRY(UART2_CTS, "y24", NULL),
+	_OMAP3_BALLENTRY(UART2_RTS, "aa24", NULL),
+	_OMAP3_BALLENTRY(UART2_RX, "ad21", NULL),
+	_OMAP3_BALLENTRY(UART2_TX, "ad22", NULL),
+	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "f23", NULL),
+	_OMAP3_BALLENTRY(UART3_RTS_SD, "f24", NULL),
+	_OMAP3_BALLENTRY(UART3_RX_IRRX, "h24", NULL),
+	_OMAP3_BALLENTRY(UART3_TX_IRTX, "g24", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbc_ball	 NULL
+#endif
+
+/*
+ * Signals different on CUS package compared to superset
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS)
+struct omap_mux __initdata omap3_cus_subset[] = {
+	_OMAP3_MUXENTRY(CAM_D10, 109,
+		"cam_d10", NULL, NULL, NULL,
+		"gpio_109", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D11, 110,
+		"cam_d11", NULL, NULL, NULL,
+		"gpio_110", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D2, 101,
+		"cam_d2", NULL, NULL, NULL,
+		"gpio_101", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D3, 102,
+		"cam_d3", NULL, NULL, NULL,
+		"gpio_102", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D4, 103,
+		"cam_d4", NULL, NULL, NULL,
+		"gpio_103", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D5, 104,
+		"cam_d5", NULL, NULL, NULL,
+		"gpio_104", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_FLD, 98,
+		"cam_fld", NULL, "cam_global_reset", NULL,
+		"gpio_98", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_HS, 94,
+		"cam_hs", NULL, NULL, NULL,
+		"gpio_94", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_PCLK, 97,
+		"cam_pclk", NULL, NULL, NULL,
+		"gpio_97", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_STROBE, 126,
+		"cam_strobe", NULL, NULL, NULL,
+		"gpio_126", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_VS, 95,
+		"cam_vs", NULL, NULL, NULL,
+		"gpio_95", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_WEN, 167,
+		"cam_wen", NULL, "cam_shutter", NULL,
+		"gpio_167", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA6, 76,
+		"dss_data6", NULL, "uart1_tx", NULL,
+		"gpio_76", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA7, 77,
+		"dss_data7", NULL, "uart1_rx", NULL,
+		"gpio_77", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA8, 78,
+		"dss_data8", NULL, NULL, NULL,
+		"gpio_78", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA9, 79,
+		"dss_data9", NULL, NULL, NULL,
+		"gpio_79", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_HSYNC, 67,
+		"dss_hsync", NULL, NULL, NULL,
+		"gpio_67", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_PCLK, 66,
+		"dss_pclk", NULL, NULL, NULL,
+		"gpio_66", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(ETK_CLK, 12,
+		"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
+		"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
+	_OMAP3_MUXENTRY(ETK_CTL, 13,
+		"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
+		"gpio_13", NULL, "hsusb1_tll_clk", NULL),
+	_OMAP3_MUXENTRY(ETK_D0, 14,
+		"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
+		"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
+	_OMAP3_MUXENTRY(ETK_D1, 15,
+		"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
+		"gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
+	_OMAP3_MUXENTRY(ETK_D10, 24,
+		"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
+		"gpio_24", NULL, "hsusb2_tll_clk", NULL),
+	_OMAP3_MUXENTRY(ETK_D11, 25,
+		"etk_d11", NULL, NULL, "hsusb2_stp",
+		"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
+	_OMAP3_MUXENTRY(ETK_D12, 26,
+		"etk_d12", NULL, NULL, "hsusb2_dir",
+		"gpio_26", NULL, "hsusb2_tll_dir", NULL),
+	_OMAP3_MUXENTRY(ETK_D13, 27,
+		"etk_d13", NULL, NULL, "hsusb2_nxt",
+		"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
+	_OMAP3_MUXENTRY(ETK_D14, 28,
+		"etk_d14", NULL, NULL, "hsusb2_data0",
+		"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
+	_OMAP3_MUXENTRY(ETK_D15, 29,
+		"etk_d15", NULL, NULL, "hsusb2_data1",
+		"gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
+	_OMAP3_MUXENTRY(ETK_D2, 16,
+		"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
+		"gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
+	_OMAP3_MUXENTRY(ETK_D3, 17,
+		"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
+		"gpio_17", NULL, "hsusb1_tll_data7", NULL),
+	_OMAP3_MUXENTRY(ETK_D4, 18,
+		"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
+		"gpio_18", NULL, "hsusb1_tll_data4", NULL),
+	_OMAP3_MUXENTRY(ETK_D5, 19,
+		"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
+		"gpio_19", NULL, "hsusb1_tll_data5", NULL),
+	_OMAP3_MUXENTRY(ETK_D6, 20,
+		"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
+		"gpio_20", NULL, "hsusb1_tll_data6", NULL),
+	_OMAP3_MUXENTRY(ETK_D7, 21,
+		"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
+		"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
+	_OMAP3_MUXENTRY(ETK_D8, 22,
+		"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
+		"gpio_22", NULL, "hsusb1_tll_dir", NULL),
+	_OMAP3_MUXENTRY(ETK_D9, 23,
+		"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
+		"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
+	_OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
+		"mcbsp3_clkx", "uart2_tx", NULL, NULL,
+		"gpio_142", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_DR, 141,
+		"mcbsp3_dr", "uart2_rts", NULL, NULL,
+		"gpio_141", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_DX, 140,
+		"mcbsp3_dx", "uart2_cts", NULL, NULL,
+		"gpio_140", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_FSX, 143,
+		"mcbsp3_fsx", "uart2_rx", NULL, NULL,
+		"gpio_143", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
+		"sdmmc2_dat5", "sdmmc2_dir_dat1",
+		"cam_global_reset", "sdmmc3_dat1",
+		"gpio_137", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
+		"sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
+		"gpio_138", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
+		"sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
+		"gpio_139", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_CTS, 150,
+		"uart1_cts", NULL, NULL, NULL,
+		"gpio_150", NULL, NULL, "safe_mode"),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cus_subset	NULL
+#endif
+
+/*
+ * Balls for CUS package
+ * 423-pin s-PBGA Package, 0.65mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
+		&& defined(CONFIG_OMAP_PACKAGE_CUS)
+struct omap_ball __initdata omap3_cus_ball[] = {
+	_OMAP3_BALLENTRY(CAM_D0, "ab18", NULL),
+	_OMAP3_BALLENTRY(CAM_D1, "ac18", NULL),
+	_OMAP3_BALLENTRY(CAM_D10, "f21", NULL),
+	_OMAP3_BALLENTRY(CAM_D11, "g21", NULL),
+	_OMAP3_BALLENTRY(CAM_D2, "g19", NULL),
+	_OMAP3_BALLENTRY(CAM_D3, "f19", NULL),
+	_OMAP3_BALLENTRY(CAM_D4, "g20", NULL),
+	_OMAP3_BALLENTRY(CAM_D5, "b21", NULL),
+	_OMAP3_BALLENTRY(CAM_D6, "l24", NULL),
+	_OMAP3_BALLENTRY(CAM_D7, "k24", NULL),
+	_OMAP3_BALLENTRY(CAM_D8, "j23", NULL),
+	_OMAP3_BALLENTRY(CAM_D9, "k23", NULL),
+	_OMAP3_BALLENTRY(CAM_FLD, "h24", NULL),
+	_OMAP3_BALLENTRY(CAM_HS, "a22", NULL),
+	_OMAP3_BALLENTRY(CAM_PCLK, "j19", NULL),
+	_OMAP3_BALLENTRY(CAM_STROBE, "j20", NULL),
+	_OMAP3_BALLENTRY(CAM_VS, "e18", NULL),
+	_OMAP3_BALLENTRY(CAM_WEN, "f18", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKA, "b22", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKB, "c22", NULL),
+	_OMAP3_BALLENTRY(DSS_ACBIAS, "j21", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA0, "ac19", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA1, "ab19", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA10, "ac22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA11, "ac23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA12, "ab22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA13, "y22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA14, "w22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA15, "v22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA16, "j22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA17, "g23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA18, "g24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA19, "h23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA2, "ad20", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA20, "d23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA21, "k22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA22, "v21", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA23, "w21", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA3, "ac20", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA4, "ad21", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA5, "ac21", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA6, "d24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA7, "e23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA8, "e24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA9, "f23", NULL),
+	_OMAP3_BALLENTRY(DSS_HSYNC, "e22", NULL),
+	_OMAP3_BALLENTRY(DSS_PCLK, "g22", NULL),
+	_OMAP3_BALLENTRY(DSS_VSYNC, "f22", NULL),
+	_OMAP3_BALLENTRY(ETK_CLK, "ac1", NULL),
+	_OMAP3_BALLENTRY(ETK_CTL, "ad3", NULL),
+	_OMAP3_BALLENTRY(ETK_D0, "ad6", NULL),
+	_OMAP3_BALLENTRY(ETK_D1, "ac6", NULL),
+	_OMAP3_BALLENTRY(ETK_D10, "ac3", NULL),
+	_OMAP3_BALLENTRY(ETK_D11, "ac9", NULL),
+	_OMAP3_BALLENTRY(ETK_D12, "ac10", NULL),
+	_OMAP3_BALLENTRY(ETK_D13, "ad11", NULL),
+	_OMAP3_BALLENTRY(ETK_D14, "ac11", NULL),
+	_OMAP3_BALLENTRY(ETK_D15, "ad12", NULL),
+	_OMAP3_BALLENTRY(ETK_D2, "ac7", NULL),
+	_OMAP3_BALLENTRY(ETK_D3, "ad8", NULL),
+	_OMAP3_BALLENTRY(ETK_D4, "ac5", NULL),
+	_OMAP3_BALLENTRY(ETK_D5, "ad2", NULL),
+	_OMAP3_BALLENTRY(ETK_D6, "ac8", NULL),
+	_OMAP3_BALLENTRY(ETK_D7, "ad9", NULL),
+	_OMAP3_BALLENTRY(ETK_D8, "ac4", NULL),
+	_OMAP3_BALLENTRY(ETK_D9, "ad5", NULL),
+	_OMAP3_BALLENTRY(GPMC_A1, "k4", NULL),
+	_OMAP3_BALLENTRY(GPMC_A10, "g2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A2, "k3", NULL),
+	_OMAP3_BALLENTRY(GPMC_A3, "k2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A4, "j4", NULL),
+	_OMAP3_BALLENTRY(GPMC_A5, "j3", NULL),
+	_OMAP3_BALLENTRY(GPMC_A6, "j2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A7, "j1", NULL),
+	_OMAP3_BALLENTRY(GPMC_A8, "h1", NULL),
+	_OMAP3_BALLENTRY(GPMC_A9, "h2", NULL),
+	_OMAP3_BALLENTRY(GPMC_CLK, "w2", NULL),
+	_OMAP3_BALLENTRY(GPMC_D10, "u1", NULL),
+	_OMAP3_BALLENTRY(GPMC_D11, "r3", NULL),
+	_OMAP3_BALLENTRY(GPMC_D12, "t3", NULL),
+	_OMAP3_BALLENTRY(GPMC_D13, "u2", NULL),
+	_OMAP3_BALLENTRY(GPMC_D14, "v1", NULL),
+	_OMAP3_BALLENTRY(GPMC_D15, "v2", NULL),
+	_OMAP3_BALLENTRY(GPMC_D8, "r2", NULL),
+	_OMAP3_BALLENTRY(GPMC_D9, "t2", NULL),
+	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k5", NULL),
+	_OMAP3_BALLENTRY(GPMC_NBE1, "l1", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS3, "d2", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS4, "f4", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS5, "g5", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS6, "f3", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS7, "g4", NULL),
+	_OMAP3_BALLENTRY(GPMC_NWP, "e1", NULL),
+	_OMAP3_BALLENTRY(GPMC_WAIT3, "c2", NULL),
+	_OMAP3_BALLENTRY(HDQ_SIO, "a24", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_CLK, "r21", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA0, "t24", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA1, "t23", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA2, "u24", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA3, "u23", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA4, "w24", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA5, "v23", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA6, "w23", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA7, "t22", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DIR, "p23", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_NXT, "r22", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_STP, "r23", NULL),
+	_OMAP3_BALLENTRY(I2C2_SCL, "ac15", NULL),
+	_OMAP3_BALLENTRY(I2C2_SDA, "ac14", NULL),
+	_OMAP3_BALLENTRY(I2C3_SCL, "ac13", NULL),
+	_OMAP3_BALLENTRY(I2C3_SDA, "ac12", NULL),
+	_OMAP3_BALLENTRY(I2C4_SCL, "y16", NULL),
+	_OMAP3_BALLENTRY(I2C4_SDA, "y15", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU0, "ac24", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU1, "ad24", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKR, "w19", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKX, "v18", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DR, "y18", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DX, "w18", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSR, "ab20", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSX, "aa19", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_CLKX, "t21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DR, "v19", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DX, "r20", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_FSX, "v20", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_CLKX, "w4", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DR, "v5", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DX, "v6", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_FSX, "v4", NULL),
+	_OMAP3_BALLENTRY(MCBSP_CLKS, "aa18", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CLK, "t5", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS0, "t6", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS3, "r5", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SIMO, "r4", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SOMI, "t4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CLK, "n5", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS0, "m5", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS1, "m4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SIMO, "n4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SOMI, "n3", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CLK, "m23", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CMD, "l23", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT0, "m22", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT1, "m21", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT2, "m20", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT3, "n23", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT4, "n22", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT5, "n21", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT6, "n20", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT7, "p24", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CLK, "y1", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CMD, "ab5", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT0, "ab3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT1, "y3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT2, "w3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT3, "v3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT4, "ab2", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT5, "aa2", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT6, "y2", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT7, "aa1", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT0, "ab12", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT1, "ac16", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT2, "ad17", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT3, "ad18", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT4, "ac17", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT5, "ab16", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT6, "aa15", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT1, "y7", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT2, "aa6", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKREQ, "y13", NULL),
+	_OMAP3_BALLENTRY(SYS_NIRQ, "w16", NULL),
+	_OMAP3_BALLENTRY(SYS_NRESWARM, "y10", NULL),
+	_OMAP3_BALLENTRY(SYS_OFF_MODE, "ad23", NULL),
+	_OMAP3_BALLENTRY(UART1_CTS, "ac2", NULL),
+	_OMAP3_BALLENTRY(UART1_RTS, "w6", NULL),
+	_OMAP3_BALLENTRY(UART1_RX, "v7", NULL),
+	_OMAP3_BALLENTRY(UART1_TX, "w7", NULL),
+	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "a23", NULL),
+	_OMAP3_BALLENTRY(UART3_RTS_SD, "b23", NULL),
+	_OMAP3_BALLENTRY(UART3_RX_IRRX, "b24", NULL),
+	_OMAP3_BALLENTRY(UART3_TX_IRTX, "c23", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cus_ball	 NULL
+#endif
+
+/*
+ * Signals different on CBB package comapared to superset
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB)
+struct omap_mux __initdata omap3_cbb_subset[] = {
+	_OMAP3_MUXENTRY(CAM_D10, 109,
+		"cam_d10", NULL, NULL, NULL,
+		"gpio_109", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D11, 110,
+		"cam_d11", NULL, NULL, NULL,
+		"gpio_110", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D2, 101,
+		"cam_d2", NULL, NULL, NULL,
+		"gpio_101", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D3, 102,
+		"cam_d3", NULL, NULL, NULL,
+		"gpio_102", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D4, 103,
+		"cam_d4", NULL, NULL, NULL,
+		"gpio_103", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D5, 104,
+		"cam_d5", NULL, NULL, NULL,
+		"gpio_104", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_FLD, 98,
+		"cam_fld", NULL, "cam_global_reset", NULL,
+		"gpio_98", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_HS, 94,
+		"cam_hs", NULL, NULL, NULL,
+		"gpio_94", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_PCLK, 97,
+		"cam_pclk", NULL, NULL, NULL,
+		"gpio_97", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_STROBE, 126,
+		"cam_strobe", NULL, NULL, NULL,
+		"gpio_126", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_VS, 95,
+		"cam_vs", NULL, NULL, NULL,
+		"gpio_95", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_WEN, 167,
+		"cam_wen", NULL, "cam_shutter", NULL,
+		"gpio_167", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA6, 76,
+		"dss_data6", NULL, "uart1_tx", NULL,
+		"gpio_76", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA7, 77,
+		"dss_data7", NULL, "uart1_rx", NULL,
+		"gpio_77", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA8, 78,
+		"dss_data8", NULL, NULL, NULL,
+		"gpio_78", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA9, 79,
+		"dss_data9", NULL, NULL, NULL,
+		"gpio_79", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_HSYNC, 67,
+		"dss_hsync", NULL, NULL, NULL,
+		"gpio_67", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_PCLK, 66,
+		"dss_pclk", NULL, NULL, NULL,
+		"gpio_66", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(ETK_CLK, 12,
+		"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
+		"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
+	_OMAP3_MUXENTRY(ETK_CTL, 13,
+		"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
+		"gpio_13", NULL, "hsusb1_tll_clk", NULL),
+	_OMAP3_MUXENTRY(ETK_D0, 14,
+		"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
+		"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
+	_OMAP3_MUXENTRY(ETK_D1, 15,
+		"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
+		"gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
+	_OMAP3_MUXENTRY(ETK_D10, 24,
+		"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
+		"gpio_24", NULL, "hsusb2_tll_clk", NULL),
+	_OMAP3_MUXENTRY(ETK_D11, 25,
+		"etk_d11", NULL, NULL, "hsusb2_stp",
+		"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
+	_OMAP3_MUXENTRY(ETK_D12, 26,
+		"etk_d12", NULL, NULL, "hsusb2_dir",
+		"gpio_26", NULL, "hsusb2_tll_dir", NULL),
+	_OMAP3_MUXENTRY(ETK_D13, 27,
+		"etk_d13", NULL, NULL, "hsusb2_nxt",
+		"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
+	_OMAP3_MUXENTRY(ETK_D14, 28,
+		"etk_d14", NULL, NULL, "hsusb2_data0",
+		"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
+	_OMAP3_MUXENTRY(ETK_D15, 29,
+		"etk_d15", NULL, NULL, "hsusb2_data1",
+		"gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
+	_OMAP3_MUXENTRY(ETK_D2, 16,
+		"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
+		"gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
+	_OMAP3_MUXENTRY(ETK_D3, 17,
+		"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
+		"gpio_17", NULL, "hsusb1_tll_data7", NULL),
+	_OMAP3_MUXENTRY(ETK_D4, 18,
+		"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
+		"gpio_18", NULL, "hsusb1_tll_data4", NULL),
+	_OMAP3_MUXENTRY(ETK_D5, 19,
+		"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
+		"gpio_19", NULL, "hsusb1_tll_data5", NULL),
+	_OMAP3_MUXENTRY(ETK_D6, 20,
+		"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
+		"gpio_20", NULL, "hsusb1_tll_data6", NULL),
+	_OMAP3_MUXENTRY(ETK_D7, 21,
+		"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
+		"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
+	_OMAP3_MUXENTRY(ETK_D8, 22,
+		"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
+		"gpio_22", NULL, "hsusb1_tll_dir", NULL),
+	_OMAP3_MUXENTRY(ETK_D9, 23,
+		"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
+		"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbb_subset	NULL
+#endif
+
+/*
+ * Balls for CBB package
+ * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
+		&& defined(CONFIG_OMAP_PACKAGE_CBB)
+struct omap_ball __initdata omap3_cbb_ball[] = {
+	_OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
+	_OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
+	_OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
+	_OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
+	_OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
+	_OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
+	_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
+	_OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
+	_OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
+	_OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
+	_OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
+	_OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
+	_OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
+	_OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
+	_OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
+	_OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
+	_OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
+	_OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
+	_OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
+	_OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
+	_OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
+	_OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
+	_OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
+	_OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
+	_OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
+	_OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
+	_OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
+	_OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
+	_OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
+	_OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
+	_OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
+	_OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
+	_OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
+	_OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
+	_OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
+	_OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
+	_OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
+	_OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
+	_OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
+	_OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
+	_OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
+	_OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
+	_OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
+	_OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
+	_OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
+	_OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
+	_OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
+	_OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
+	_OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
+	_OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
+	_OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
+	_OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
+	_OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
+	_OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
+	_OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
+	_OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
+	_OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
+	_OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
+	_OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
+	_OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
+	_OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
+	_OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
+	_OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
+	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
+	_OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
+	_OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
+	_OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
+	_OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
+	_OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
+	_OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
+	_OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
+	_OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
+	_OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
+	_OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
+	_OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
+	_OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
+	_OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT4, "p27", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT5, "p26", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT6, "r27", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT7, "r25", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
+	_OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
+	_OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
+	_OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
+	_OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
+	_OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
+	_OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
+	_OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
+	_OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
+	_OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
+	_OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
+	_OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
+	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
+	_OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
+	_OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
+	_OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbb_ball	 NULL
+#endif
+
+/*
+ * Signals different on 36XX CBP package comapared to 34XX CBC package
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP)
+struct omap_mux __initdata omap36xx_cbp_subset[] = {
+	_OMAP3_MUXENTRY(CAM_D0, 99,
+		"cam_d0", NULL, "csi2_dx2", NULL,
+		"gpio_99", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D1, 100,
+		"cam_d1", NULL, "csi2_dy2", NULL,
+		"gpio_100", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D10, 109,
+		"cam_d10", "ssi2_wake", NULL, NULL,
+		"gpio_109", "hw_dbg8", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D2, 101,
+		"cam_d2", "ssi2_rdy_tx", NULL, NULL,
+		"gpio_101", "hw_dbg4", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D3, 102,
+		"cam_d3", "ssi2_dat_rx", NULL, NULL,
+		"gpio_102", "hw_dbg5", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D4, 103,
+		"cam_d4", "ssi2_flag_rx", NULL, NULL,
+		"gpio_103", "hw_dbg6", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D5, 104,
+		"cam_d5", "ssi2_rdy_rx", NULL, NULL,
+		"gpio_104", "hw_dbg7", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_HS, 94,
+		"cam_hs", "ssi2_dat_tx", NULL, NULL,
+		"gpio_94", "hw_dbg0", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_VS, 95,
+		"cam_vs", "ssi2_flag_tx", NULL, NULL,
+		"gpio_95", "hw_dbg1", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA0, 70,
+		"dss_data0", "dsi_dx0", "uart1_cts", NULL,
+		"gpio_70", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA1, 71,
+		"dss_data1", "dsi_dy0", "uart1_rts", NULL,
+		"gpio_71", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA2, 72,
+		"dss_data2", "dsi_dx1", NULL, NULL,
+		"gpio_72", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA3, 73,
+		"dss_data3", "dsi_dy1", NULL, NULL,
+		"gpio_73", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA4, 74,
+		"dss_data4", "dsi_dx2", "uart3_rx_irrx", NULL,
+		"gpio_74", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA5, 75,
+		"dss_data5", "dsi_dy2", "uart3_tx_irtx", NULL,
+		"gpio_75", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA6, 76,
+		"dss_data6", NULL, "uart1_tx", "dssvenc656_data6",
+		"gpio_76", "hw_dbg14", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA7, 77,
+		"dss_data7", NULL, "uart1_rx", "dssvenc656_data7",
+		"gpio_77", "hw_dbg15", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA8, 78,
+		"dss_data8", NULL, "uart3_rx_irrx", NULL,
+		"gpio_78", "hw_dbg16", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA9, 79,
+		"dss_data9", NULL, "uart3_tx_irtx", NULL,
+		"gpio_79", "hw_dbg17", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(ETK_D12, 26,
+		"etk_d12", "sys_drm_msecure", NULL, "hsusb2_dir",
+		"gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		"gpmc_a11", NULL, NULL, NULL,
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_WAIT2, 64,
+		"gpmc_wait2", NULL, "uart4_tx", NULL,
+		"gpio_64", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_WAIT3, 65,
+		"gpmc_wait3", "sys_ndmareq1", "uart4_rx", NULL,
+		"gpio_65", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
+		"hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
+		"gpio_125", "uart2_tx", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
+		"hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
+		"gpio_130", "uart2_rx", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
+		"hsusb0_data2", NULL, "uart3_rts_sd", NULL,
+		"gpio_131", "uart2_rts", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
+		"hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
+		"gpio_169", "uart2_cts", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
+		"mcbsp1_clkr", "mcspi4_clk", "sim_cd", NULL,
+		"gpio_156", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_FSR, 157,
+		"mcbsp1_fsr", "adpllv2d_dithering_en1",
+		"cam_global_reset", NULL,
+		"gpio_157", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
+		"mcbsp4_clkx", "ssi1_dat_rx", NULL, NULL,
+		"gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_DR, 153,
+		"mcbsp4_dr", "ssi1_flag_rx", NULL, NULL,
+		"gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_DX, 154,
+		"mcbsp4_dx", "ssi1_rdy_rx", NULL, NULL,
+		"gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_FSX, 155,
+		"mcbsp4_fsx", "ssi1_wake", NULL, NULL,
+		"gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_CS1, 175,
+		"mcspi1_cs1", "adpllv2d_dithering_en2", NULL, "sdmmc3_cmd",
+		"gpio_175", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
+		"sad2d_mbusflag", "mad2d_sbusflag", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
+		"sad2d_mcad28", "mad2d_mcad28", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
+		"sad2d_mcad29", "mad2d_mcad29", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
+		"sad2d_mcad32", "mad2d_mcad32", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
+		"sad2d_mcad33", "mad2d_mcad33", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
+		"sad2d_mcad34", "mad2d_mcad34", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
+		"sad2d_mcad35", "mad2d_mcad35", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
+		"sad2d_mcad36", "mad2d_mcad36", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
+		"sad2d_mread", "mad2d_sread", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
+		"sad2d_mwrite", "mad2d_swrite", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
+		"sad2d_sbusflag", "mad2d_mbusflag", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
+		"sad2d_sread", "mad2d_mread", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
+		"sad2d_swrite", "mad2d_mwrite", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SDMMC1_CLK, 120,
+		"sdmmc1_clk", "ms_clk", NULL, NULL,
+		"gpio_120", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_CMD, 121,
+		"sdmmc1_cmd", "ms_bs", NULL, NULL,
+		"gpio_121", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
+		"sdmmc1_dat0", "ms_dat0", NULL, NULL,
+		"gpio_122", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
+		"sdmmc1_dat1", "ms_dat1", NULL, NULL,
+		"gpio_123", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
+		"sdmmc1_dat2", "ms_dat2", NULL, NULL,
+		"gpio_124", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
+		"sdmmc1_dat3", "ms_dat3", NULL, NULL,
+		"gpio_125", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDRC_CKE0, 0,
+		"sdrc_cke0", NULL, NULL, NULL,
+		NULL, NULL, NULL, "safe_mode_out1"),
+	_OMAP3_MUXENTRY(SDRC_CKE1, 0,
+		"sdrc_cke1", NULL, NULL, NULL,
+		NULL, NULL, NULL, "safe_mode_out1"),
+	_OMAP3_MUXENTRY(SIM_IO, 126,
+		"sim_io", "sim_io_low_impedance", NULL, NULL,
+		"gpio_126", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SIM_CLK, 127,
+		"sim_clk", NULL, NULL, NULL,
+		"gpio_127", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SIM_PWRCTRL, 128,
+		"sim_pwrctrl", NULL, NULL, NULL,
+		"gpio_128", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SIM_RST, 129,
+		"sim_rst", NULL, NULL, NULL,
+		"gpio_129", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT0, 2,
+		"sys_boot0", NULL, NULL, "dss_data18",
+		"gpio_2", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT1, 3,
+		"sys_boot1", NULL, NULL, "dss_data19",
+		"gpio_3", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT3, 5,
+		"sys_boot3", NULL, NULL, "dss_data20",
+		"gpio_5", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT4, 6,
+		"sys_boot4", "sdmmc2_dir_dat2", NULL, "dss_data21",
+		"gpio_6", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT5, 7,
+		"sys_boot5", "sdmmc2_dir_dat3", NULL, "dss_data22",
+		"gpio_7", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT6, 8,
+		"sys_boot6", NULL, NULL, "dss_data23",
+		"gpio_8", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_CTS, 150,
+		"uart1_cts", "ssi1_rdy_tx", NULL, NULL,
+		"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_RTS, 149,
+		"uart1_rts", "ssi1_flag_tx", NULL, NULL,
+		"gpio_149", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_TX, 148,
+		"uart1_tx", "ssi1_dat_tx", NULL, NULL,
+		"gpio_148", NULL, NULL, "safe_mode"),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap36xx_cbp_subset	NULL
+#endif
+
+/*
+ * Balls for 36XX CBP package
+ * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
+		&& defined (CONFIG_OMAP_PACKAGE_CBP)
+struct omap_ball __initdata omap36xx_cbp_ball[] = {
+	_OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
+	_OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
+	_OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
+	_OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
+	_OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
+	_OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
+	_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
+	_OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
+	_OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
+	_OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
+	_OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
+	_OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
+	_OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
+	_OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
+	_OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
+	_OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
+	_OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
+	_OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
+	_OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
+	_OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
+	_OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
+	_OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
+	_OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
+	_OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
+	_OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
+	_OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
+	_OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
+	_OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
+	_OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
+	_OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
+	_OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
+	_OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
+	_OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
+	_OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
+	_OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
+	_OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
+	_OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
+	_OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
+	_OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
+	_OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
+	_OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
+	_OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
+	_OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
+	_OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
+	_OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
+	_OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
+	_OMAP3_BALLENTRY(GPMC_A11, NULL, "ac20"),
+	_OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
+	_OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
+	_OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
+	_OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
+	_OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
+	_OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
+	_OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
+	_OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
+	_OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
+	_OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"),
+	_OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"),
+	_OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
+	_OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
+	_OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
+	_OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
+	_OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
+	_OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
+	_OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"),
+	_OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"),
+	_OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"),
+	_OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"),
+	_OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"),
+	_OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"),
+	_OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
+	_OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
+	_OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"),
+	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
+	_OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"),
+	_OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
+	_OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"),
+	_OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"),
+	_OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
+	_OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"),
+	_OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
+	_OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
+	_OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
+	_OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
+	_OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL),
+	_OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL),
+	_OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
+	_OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
+	_OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
+	_OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
+	_OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
+	_OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
+	_OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL),
+	_OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL),
+	_OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL),
+	_OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL),
+	_OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
+	_OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
+	_OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"),
+	_OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"),
+	_OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"),
+	_OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"),
+	_OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"),
+	_OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"),
+	_OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"),
+	_OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"),
+	_OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"),
+	_OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"),
+	_OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"),
+	_OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"),
+	_OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"),
+	_OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"),
+	_OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"),
+	_OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"),
+	_OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"),
+	_OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"),
+	_OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"),
+	_OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"),
+	_OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"),
+	_OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"),
+	_OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"),
+	_OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"),
+	_OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"),
+	_OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"),
+	_OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"),
+	_OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"),
+	_OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"),
+	_OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"),
+	_OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"),
+	_OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"),
+	_OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"),
+	_OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"),
+	_OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"),
+	_OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"),
+	_OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"),
+	_OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"),
+	_OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"),
+	_OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"),
+	_OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"),
+	_OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"),
+	_OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"),
+	_OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"),
+	_OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"),
+	_OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"),
+	_OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"),
+	_OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"),
+	_OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"),
+	_OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"),
+	_OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"),
+	_OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"),
+	_OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"),
+	_OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"),
+	_OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"),
+	_OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"),
+	_OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"),
+	_OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"),
+	_OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"),
+	_OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"),
+	_OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"),
+	_OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"),
+	_OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"),
+	_OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"),
+	_OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"),
+	_OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"),
+	_OMAP3_BALLENTRY(SIM_CLK, "p26", NULL),
+	_OMAP3_BALLENTRY(SIM_IO, "p27", NULL),
+	_OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL),
+	_OMAP3_BALLENTRY(SIM_RST, "r25", NULL),
+	_OMAP3_BALLENTRY(SYS_32K, "ae25", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
+	_OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
+	_OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
+	_OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
+	_OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
+	_OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
+	_OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
+	_OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
+	_OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
+	_OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
+	_OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
+	_OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
+	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
+	_OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
+	_OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
+	_OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap36xx_cbp_ball	 NULL
+#endif
+
+int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
+{
+	struct omap_mux *package_subset;
+	struct omap_ball *package_balls;
+
+	switch (flags & OMAP_PACKAGE_MASK) {
+	case (OMAP_PACKAGE_CBC):
+		package_subset = omap3_cbc_subset;
+		package_balls = omap3_cbc_ball;
+		break;
+	case (OMAP_PACKAGE_CBB):
+		package_subset = omap3_cbb_subset;
+		package_balls = omap3_cbb_ball;
+		break;
+	case (OMAP_PACKAGE_CUS):
+		package_subset = omap3_cus_subset;
+		package_balls = omap3_cus_ball;
+		break;
+	case (OMAP_PACKAGE_CBP):
+		package_subset = omap36xx_cbp_subset;
+		package_balls = omap36xx_cbp_ball;
+		break;
+	default:
+		printk(KERN_ERR "mux: Unknown omap package, mux disabled\n");
+		return -EINVAL;
+	}
+
+	return omap_mux_init(OMAP3_CONTROL_PADCONF_MUX_PBASE,
+			     OMAP3_CONTROL_PADCONF_MUX_SIZE,
+				omap3_muxmodes, package_subset, board_subset,
+				package_balls);
+}
diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h
new file mode 100644
index 000000000000..6543ebf8ecfc
--- /dev/null
+++ b/arch/arm/mach-omap2/mux34xx.h
@@ -0,0 +1,398 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define OMAP3_CONTROL_PADCONF_MUX_PBASE				0x48002030LU
+
+#define OMAP3_MUX(mode0, mux_value)					\
+{									\
+	.reg_offset	= (OMAP3_CONTROL_PADCONF_##mode0##_OFFSET),	\
+	.value		= (mux_value),					\
+}
+
+/*
+ * OMAP3 CONTROL_PADCONF* register offsets for pin-muxing
+ *
+ * Extracted from the TRM.  Add 0x48002030 to these values to get the
+ * absolute addresses.  The name in the macro is the mode-0 name of
+ * the pin.  NOTE: These registers are 16-bits wide.
+ *
+ * Note that 34XX TRM uses MMC instead of SDMMC and SAD2D instead
+ * of CHASSIS for some registers. For the defines, we follow the
+ * 36XX naming, and use SDMMC and CHASSIS.
+ */
+#define OMAP3_CONTROL_PADCONF_SDRC_D0_OFFSET			0x000
+#define OMAP3_CONTROL_PADCONF_SDRC_D1_OFFSET			0x002
+#define OMAP3_CONTROL_PADCONF_SDRC_D2_OFFSET			0x004
+#define OMAP3_CONTROL_PADCONF_SDRC_D3_OFFSET			0x006
+#define OMAP3_CONTROL_PADCONF_SDRC_D4_OFFSET			0x008
+#define OMAP3_CONTROL_PADCONF_SDRC_D5_OFFSET			0x00a
+#define OMAP3_CONTROL_PADCONF_SDRC_D6_OFFSET			0x00c
+#define OMAP3_CONTROL_PADCONF_SDRC_D7_OFFSET			0x00e
+#define OMAP3_CONTROL_PADCONF_SDRC_D8_OFFSET			0x010
+#define OMAP3_CONTROL_PADCONF_SDRC_D9_OFFSET			0x012
+#define OMAP3_CONTROL_PADCONF_SDRC_D10_OFFSET			0x014
+#define OMAP3_CONTROL_PADCONF_SDRC_D11_OFFSET			0x016
+#define OMAP3_CONTROL_PADCONF_SDRC_D12_OFFSET			0x018
+#define OMAP3_CONTROL_PADCONF_SDRC_D13_OFFSET			0x01a
+#define OMAP3_CONTROL_PADCONF_SDRC_D14_OFFSET			0x01c
+#define OMAP3_CONTROL_PADCONF_SDRC_D15_OFFSET			0x01e
+#define OMAP3_CONTROL_PADCONF_SDRC_D16_OFFSET			0x020
+#define OMAP3_CONTROL_PADCONF_SDRC_D17_OFFSET			0x022
+#define OMAP3_CONTROL_PADCONF_SDRC_D18_OFFSET			0x024
+#define OMAP3_CONTROL_PADCONF_SDRC_D19_OFFSET			0x026
+#define OMAP3_CONTROL_PADCONF_SDRC_D20_OFFSET			0x028
+#define OMAP3_CONTROL_PADCONF_SDRC_D21_OFFSET			0x02a
+#define OMAP3_CONTROL_PADCONF_SDRC_D22_OFFSET			0x02c
+#define OMAP3_CONTROL_PADCONF_SDRC_D23_OFFSET			0x02e
+#define OMAP3_CONTROL_PADCONF_SDRC_D24_OFFSET			0x030
+#define OMAP3_CONTROL_PADCONF_SDRC_D25_OFFSET			0x032
+#define OMAP3_CONTROL_PADCONF_SDRC_D26_OFFSET			0x034
+#define OMAP3_CONTROL_PADCONF_SDRC_D27_OFFSET			0x036
+#define OMAP3_CONTROL_PADCONF_SDRC_D28_OFFSET			0x038
+#define OMAP3_CONTROL_PADCONF_SDRC_D29_OFFSET			0x03a
+#define OMAP3_CONTROL_PADCONF_SDRC_D30_OFFSET			0x03c
+#define OMAP3_CONTROL_PADCONF_SDRC_D31_OFFSET			0x03e
+#define OMAP3_CONTROL_PADCONF_SDRC_CLK_OFFSET			0x040
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS0_OFFSET			0x042
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS1_OFFSET			0x044
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS2_OFFSET			0x046
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS3_OFFSET			0x048
+#define OMAP3_CONTROL_PADCONF_GPMC_A1_OFFSET			0x04a
+#define OMAP3_CONTROL_PADCONF_GPMC_A2_OFFSET			0x04c
+#define OMAP3_CONTROL_PADCONF_GPMC_A3_OFFSET			0x04e
+#define OMAP3_CONTROL_PADCONF_GPMC_A4_OFFSET			0x050
+#define OMAP3_CONTROL_PADCONF_GPMC_A5_OFFSET			0x052
+#define OMAP3_CONTROL_PADCONF_GPMC_A6_OFFSET			0x054
+#define OMAP3_CONTROL_PADCONF_GPMC_A7_OFFSET			0x056
+#define OMAP3_CONTROL_PADCONF_GPMC_A8_OFFSET			0x058
+#define OMAP3_CONTROL_PADCONF_GPMC_A9_OFFSET			0x05a
+#define OMAP3_CONTROL_PADCONF_GPMC_A10_OFFSET			0x05c
+#define OMAP3_CONTROL_PADCONF_GPMC_D0_OFFSET			0x05e
+#define OMAP3_CONTROL_PADCONF_GPMC_D1_OFFSET			0x060
+#define OMAP3_CONTROL_PADCONF_GPMC_D2_OFFSET			0x062
+#define OMAP3_CONTROL_PADCONF_GPMC_D3_OFFSET			0x064
+#define OMAP3_CONTROL_PADCONF_GPMC_D4_OFFSET			0x066
+#define OMAP3_CONTROL_PADCONF_GPMC_D5_OFFSET			0x068
+#define OMAP3_CONTROL_PADCONF_GPMC_D6_OFFSET			0x06a
+#define OMAP3_CONTROL_PADCONF_GPMC_D7_OFFSET			0x06c
+#define OMAP3_CONTROL_PADCONF_GPMC_D8_OFFSET			0x06e
+#define OMAP3_CONTROL_PADCONF_GPMC_D9_OFFSET			0x070
+#define OMAP3_CONTROL_PADCONF_GPMC_D10_OFFSET			0x072
+#define OMAP3_CONTROL_PADCONF_GPMC_D11_OFFSET			0x074
+#define OMAP3_CONTROL_PADCONF_GPMC_D12_OFFSET			0x076
+#define OMAP3_CONTROL_PADCONF_GPMC_D13_OFFSET			0x078
+#define OMAP3_CONTROL_PADCONF_GPMC_D14_OFFSET			0x07a
+#define OMAP3_CONTROL_PADCONF_GPMC_D15_OFFSET			0x07c
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS0_OFFSET			0x07e
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS1_OFFSET			0x080
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS2_OFFSET			0x082
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS3_OFFSET			0x084
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS4_OFFSET			0x086
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS5_OFFSET			0x088
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS6_OFFSET			0x08a
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS7_OFFSET			0x08c
+#define OMAP3_CONTROL_PADCONF_GPMC_CLK_OFFSET			0x08e
+#define OMAP3_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET		0x090
+#define OMAP3_CONTROL_PADCONF_GPMC_NOE_OFFSET			0x092
+#define OMAP3_CONTROL_PADCONF_GPMC_NWE_OFFSET			0x094
+#define OMAP3_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET		0x096
+#define OMAP3_CONTROL_PADCONF_GPMC_NBE1_OFFSET			0x098
+#define OMAP3_CONTROL_PADCONF_GPMC_NWP_OFFSET			0x09a
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT0_OFFSET			0x09c
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT1_OFFSET			0x09e
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT2_OFFSET			0x0a0
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT3_OFFSET			0x0a2
+#define OMAP3_CONTROL_PADCONF_DSS_PCLK_OFFSET			0x0a4
+#define OMAP3_CONTROL_PADCONF_DSS_HSYNC_OFFSET			0x0a6
+#define OMAP3_CONTROL_PADCONF_DSS_VSYNC_OFFSET			0x0a8
+#define OMAP3_CONTROL_PADCONF_DSS_ACBIAS_OFFSET			0x0aa
+#define OMAP3_CONTROL_PADCONF_DSS_DATA0_OFFSET			0x0ac
+#define OMAP3_CONTROL_PADCONF_DSS_DATA1_OFFSET			0x0ae
+#define OMAP3_CONTROL_PADCONF_DSS_DATA2_OFFSET			0x0b0
+#define OMAP3_CONTROL_PADCONF_DSS_DATA3_OFFSET			0x0b2
+#define OMAP3_CONTROL_PADCONF_DSS_DATA4_OFFSET			0x0b4
+#define OMAP3_CONTROL_PADCONF_DSS_DATA5_OFFSET			0x0b6
+#define OMAP3_CONTROL_PADCONF_DSS_DATA6_OFFSET			0x0b8
+#define OMAP3_CONTROL_PADCONF_DSS_DATA7_OFFSET			0x0ba
+#define OMAP3_CONTROL_PADCONF_DSS_DATA8_OFFSET			0x0bc
+#define OMAP3_CONTROL_PADCONF_DSS_DATA9_OFFSET			0x0be
+#define OMAP3_CONTROL_PADCONF_DSS_DATA10_OFFSET			0x0c0
+#define OMAP3_CONTROL_PADCONF_DSS_DATA11_OFFSET			0x0c2
+#define OMAP3_CONTROL_PADCONF_DSS_DATA12_OFFSET			0x0c4
+#define OMAP3_CONTROL_PADCONF_DSS_DATA13_OFFSET			0x0c6
+#define OMAP3_CONTROL_PADCONF_DSS_DATA14_OFFSET			0x0c8
+#define OMAP3_CONTROL_PADCONF_DSS_DATA15_OFFSET			0x0ca
+#define OMAP3_CONTROL_PADCONF_DSS_DATA16_OFFSET			0x0cc
+#define OMAP3_CONTROL_PADCONF_DSS_DATA17_OFFSET			0x0ce
+#define OMAP3_CONTROL_PADCONF_DSS_DATA18_OFFSET			0x0d0
+#define OMAP3_CONTROL_PADCONF_DSS_DATA19_OFFSET			0x0d2
+#define OMAP3_CONTROL_PADCONF_DSS_DATA20_OFFSET			0x0d4
+#define OMAP3_CONTROL_PADCONF_DSS_DATA21_OFFSET			0x0d6
+#define OMAP3_CONTROL_PADCONF_DSS_DATA22_OFFSET			0x0d8
+#define OMAP3_CONTROL_PADCONF_DSS_DATA23_OFFSET			0x0da
+#define OMAP3_CONTROL_PADCONF_CAM_HS_OFFSET			0x0dc
+#define OMAP3_CONTROL_PADCONF_CAM_VS_OFFSET			0x0de
+#define OMAP3_CONTROL_PADCONF_CAM_XCLKA_OFFSET			0x0e0
+#define OMAP3_CONTROL_PADCONF_CAM_PCLK_OFFSET			0x0e2
+#define OMAP3_CONTROL_PADCONF_CAM_FLD_OFFSET			0x0e4
+#define OMAP3_CONTROL_PADCONF_CAM_D0_OFFSET			0x0e6
+#define OMAP3_CONTROL_PADCONF_CAM_D1_OFFSET			0x0e8
+#define OMAP3_CONTROL_PADCONF_CAM_D2_OFFSET			0x0ea
+#define OMAP3_CONTROL_PADCONF_CAM_D3_OFFSET			0x0ec
+#define OMAP3_CONTROL_PADCONF_CAM_D4_OFFSET			0x0ee
+#define OMAP3_CONTROL_PADCONF_CAM_D5_OFFSET			0x0f0
+#define OMAP3_CONTROL_PADCONF_CAM_D6_OFFSET			0x0f2
+#define OMAP3_CONTROL_PADCONF_CAM_D7_OFFSET			0x0f4
+#define OMAP3_CONTROL_PADCONF_CAM_D8_OFFSET			0x0f6
+#define OMAP3_CONTROL_PADCONF_CAM_D9_OFFSET			0x0f8
+#define OMAP3_CONTROL_PADCONF_CAM_D10_OFFSET			0x0fa
+#define OMAP3_CONTROL_PADCONF_CAM_D11_OFFSET			0x0fc
+#define OMAP3_CONTROL_PADCONF_CAM_XCLKB_OFFSET			0x0fe
+#define OMAP3_CONTROL_PADCONF_CAM_WEN_OFFSET			0x100
+#define OMAP3_CONTROL_PADCONF_CAM_STROBE_OFFSET			0x102
+#define OMAP3_CONTROL_PADCONF_CSI2_DX0_OFFSET			0x104
+#define OMAP3_CONTROL_PADCONF_CSI2_DY0_OFFSET			0x106
+#define OMAP3_CONTROL_PADCONF_CSI2_DX1_OFFSET			0x108
+#define OMAP3_CONTROL_PADCONF_CSI2_DY1_OFFSET			0x10a
+#define OMAP3_CONTROL_PADCONF_MCBSP2_FSX_OFFSET			0x10c
+#define OMAP3_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET		0x10e
+#define OMAP3_CONTROL_PADCONF_MCBSP2_DR_OFFSET			0x110
+#define OMAP3_CONTROL_PADCONF_MCBSP2_DX_OFFSET			0x112
+#define OMAP3_CONTROL_PADCONF_SDMMC1_CLK_OFFSET			0x114
+#define OMAP3_CONTROL_PADCONF_SDMMC1_CMD_OFFSET			0x116
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET		0x118
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET		0x11a
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET		0x11c
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET		0x11e
+
+/* SDMMC1_DAT4 - DAT7 are SIM_IO SIM_CLK SIM_PWRCTRL and SIM_RST on 36xx */
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET		0x120
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET		0x122
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET		0x124
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET		0x126
+
+#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET			0x128
+#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET			0x12a
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET		0x12c
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET		0x12e
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET		0x130
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET		0x132
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT4_OFFSET		0x134
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT5_OFFSET		0x136
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT6_OFFSET		0x138
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT7_OFFSET		0x13a
+#define OMAP3_CONTROL_PADCONF_MCBSP3_DX_OFFSET			0x13c
+#define OMAP3_CONTROL_PADCONF_MCBSP3_DR_OFFSET			0x13e
+#define OMAP3_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET		0x140
+#define OMAP3_CONTROL_PADCONF_MCBSP3_FSX_OFFSET			0x142
+#define OMAP3_CONTROL_PADCONF_UART2_CTS_OFFSET			0x144
+#define OMAP3_CONTROL_PADCONF_UART2_RTS_OFFSET			0x146
+#define OMAP3_CONTROL_PADCONF_UART2_TX_OFFSET			0x148
+#define OMAP3_CONTROL_PADCONF_UART2_RX_OFFSET			0x14a
+#define OMAP3_CONTROL_PADCONF_UART1_TX_OFFSET			0x14c
+#define OMAP3_CONTROL_PADCONF_UART1_RTS_OFFSET			0x14e
+#define OMAP3_CONTROL_PADCONF_UART1_CTS_OFFSET			0x150
+#define OMAP3_CONTROL_PADCONF_UART1_RX_OFFSET			0x152
+#define OMAP3_CONTROL_PADCONF_MCBSP4_CLKX_OFFSET		0x154
+#define OMAP3_CONTROL_PADCONF_MCBSP4_DR_OFFSET			0x156
+#define OMAP3_CONTROL_PADCONF_MCBSP4_DX_OFFSET			0x158
+#define OMAP3_CONTROL_PADCONF_MCBSP4_FSX_OFFSET			0x15a
+#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET		0x15c
+#define OMAP3_CONTROL_PADCONF_MCBSP1_FSR_OFFSET			0x15e
+#define OMAP3_CONTROL_PADCONF_MCBSP1_DX_OFFSET			0x160
+#define OMAP3_CONTROL_PADCONF_MCBSP1_DR_OFFSET			0x162
+#define OMAP3_CONTROL_PADCONF_MCBSP_CLKS_OFFSET			0x164
+#define OMAP3_CONTROL_PADCONF_MCBSP1_FSX_OFFSET			0x166
+#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET		0x168
+#define OMAP3_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET		0x16a
+#define OMAP3_CONTROL_PADCONF_UART3_RTS_SD_OFFSET		0x16c
+#define OMAP3_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET		0x16e
+#define OMAP3_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET		0x170
+#define OMAP3_CONTROL_PADCONF_HSUSB0_CLK_OFFSET			0x172
+#define OMAP3_CONTROL_PADCONF_HSUSB0_STP_OFFSET			0x174
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DIR_OFFSET			0x176
+#define OMAP3_CONTROL_PADCONF_HSUSB0_NXT_OFFSET			0x178
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA0_OFFSET		0x17a
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA1_OFFSET		0x17c
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA2_OFFSET		0x17e
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA3_OFFSET		0x180
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA4_OFFSET		0x182
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA5_OFFSET		0x184
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA6_OFFSET		0x186
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA7_OFFSET		0x188
+#define OMAP3_CONTROL_PADCONF_I2C1_SCL_OFFSET			0x18a
+#define OMAP3_CONTROL_PADCONF_I2C1_SDA_OFFSET			0x18c
+#define OMAP3_CONTROL_PADCONF_I2C2_SCL_OFFSET			0x18e
+#define OMAP3_CONTROL_PADCONF_I2C2_SDA_OFFSET			0x190
+#define OMAP3_CONTROL_PADCONF_I2C3_SCL_OFFSET			0x192
+#define OMAP3_CONTROL_PADCONF_I2C3_SDA_OFFSET			0x194
+#define OMAP3_CONTROL_PADCONF_HDQ_SIO_OFFSET			0x196
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CLK_OFFSET			0x198
+#define OMAP3_CONTROL_PADCONF_MCSPI1_SIMO_OFFSET		0x19a
+#define OMAP3_CONTROL_PADCONF_MCSPI1_SOMI_OFFSET		0x19c
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS0_OFFSET			0x19e
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS1_OFFSET			0x1a0
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS2_OFFSET			0x1a2
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS3_OFFSET			0x1a4
+#define OMAP3_CONTROL_PADCONF_MCSPI2_CLK_OFFSET			0x1a6
+#define OMAP3_CONTROL_PADCONF_MCSPI2_SIMO_OFFSET		0x1a8
+#define OMAP3_CONTROL_PADCONF_MCSPI2_SOMI_OFFSET		0x1aa
+#define OMAP3_CONTROL_PADCONF_MCSPI2_CS0_OFFSET			0x1ac
+#define OMAP3_CONTROL_PADCONF_MCSPI2_CS1_OFFSET			0x1ae
+#define OMAP3_CONTROL_PADCONF_SYS_NIRQ_OFFSET			0x1b0
+#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT2_OFFSET		0x1b2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD0_OFFSET		0x1b4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD1_OFFSET		0x1b6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD2_OFFSET		0x1b8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD3_OFFSET		0x1ba
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD4_OFFSET		0x1bc
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD5_OFFSET		0x1be
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD6_OFFSET		0x1c0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD7_OFFSET		0x1c2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD8_OFFSET		0x1c4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD9_OFFSET		0x1c6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD10_OFFSET		0x1c8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD11_OFFSET		0x1ca
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD12_OFFSET		0x1cc
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD13_OFFSET		0x1ce
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD14_OFFSET		0x1d0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD15_OFFSET		0x1d2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD16_OFFSET		0x1d4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD17_OFFSET		0x1d6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD18_OFFSET		0x1d8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD19_OFFSET		0x1da
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD20_OFFSET		0x1dc
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD21_OFFSET		0x1de
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD22_OFFSET		0x1e0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD23_OFFSET		0x1e2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD24_OFFSET		0x1e4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD25_OFFSET		0x1e6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD26_OFFSET		0x1e8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD27_OFFSET		0x1ea
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD28_OFFSET		0x1ec
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD29_OFFSET		0x1ee
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD30_OFFSET		0x1f0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD31_OFFSET		0x1f2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD32_OFFSET		0x1f4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD33_OFFSET		0x1f6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET		0x1f8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET		0x1fa
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET		0x1fc
+
+/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */
+#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET		0x1fe
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET		0x200
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESWARW_OFFSET		0x202
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NIRQ_OFFSET		0x204
+#define OMAP3_CONTROL_PADCONF_CHASSIS_FIQ_OFFSET		0x206
+#define OMAP3_CONTROL_PADCONF_CHASSIS_ARMIRQ_OFFSET		0x208
+#define OMAP3_CONTROL_PADCONF_CHASSIS_IVAIRQ_OFFSET		0x20a
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ0_OFFSET		0x20c
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ1_OFFSET		0x20e
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ2_OFFSET		0x210
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ3_OFFSET		0x212
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NTRST_OFFSET		0x214
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TDI_OFFSET		0x216
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TDO_OFFSET		0x218
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TMS_OFFSET		0x21a
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TCK_OFFSET		0x21c
+#define OMAP3_CONTROL_PADCONF_CHASSIS_RTCK_OFFSET		0x21e
+#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET		0x220
+#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET		0x222
+#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET		0x224
+
+#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET		0x226
+#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET		0x228
+#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET		0x22a
+#define OMAP3_CONTROL_PADCONF_SAD2D_SREAD_OFFSET		0x22c
+#define OMAP3_CONTROL_PADCONF_SAD2D_MBUSFLAG_OFFSET		0x22e
+#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET		0x230
+#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET			0x232
+#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET			0x234
+
+/* 36xx only */
+#define OMAP3_CONTROL_PADCONF_GPMC_A11_OFFSET			0x236
+#define OMAP3_CONTROL_PADCONF_SDRC_BA0_OFFSET			0x570
+#define OMAP3_CONTROL_PADCONF_SDRC_BA1_OFFSET			0x572
+#define OMAP3_CONTROL_PADCONF_SDRC_A0_OFFSET			0x574
+#define OMAP3_CONTROL_PADCONF_SDRC_A1_OFFSET			0x576
+#define OMAP3_CONTROL_PADCONF_SDRC_A2_OFFSET			0x578
+#define OMAP3_CONTROL_PADCONF_SDRC_A3_OFFSET			0x57a
+#define OMAP3_CONTROL_PADCONF_SDRC_A4_OFFSET			0x57c
+#define OMAP3_CONTROL_PADCONF_SDRC_A5_OFFSET			0x57e
+#define OMAP3_CONTROL_PADCONF_SDRC_A6_OFFSET			0x580
+#define OMAP3_CONTROL_PADCONF_SDRC_A7_OFFSET			0x582
+#define OMAP3_CONTROL_PADCONF_SDRC_A8_OFFSET			0x584
+#define OMAP3_CONTROL_PADCONF_SDRC_A9_OFFSET			0x586
+#define OMAP3_CONTROL_PADCONF_SDRC_A10_OFFSET			0x588
+#define OMAP3_CONTROL_PADCONF_SDRC_A11_OFFSET			0x58a
+#define OMAP3_CONTROL_PADCONF_SDRC_A12_OFFSET			0x58c
+#define OMAP3_CONTROL_PADCONF_SDRC_A13_OFFSET			0x58e
+#define OMAP3_CONTROL_PADCONF_SDRC_A14_OFFSET			0x590
+#define OMAP3_CONTROL_PADCONF_SDRC_NCS0_OFFSET			0x592
+#define OMAP3_CONTROL_PADCONF_SDRC_NCS1_OFFSET			0x594
+#define OMAP3_CONTROL_PADCONF_SDRC_NCLK_OFFSET			0x596
+#define OMAP3_CONTROL_PADCONF_SDRC_NRAS_OFFSET			0x598
+#define OMAP3_CONTROL_PADCONF_SDRC_NCAS_OFFSET			0x59a
+#define OMAP3_CONTROL_PADCONF_SDRC_NWE_OFFSET			0x59c
+#define OMAP3_CONTROL_PADCONF_SDRC_DM0_OFFSET			0x59e
+#define OMAP3_CONTROL_PADCONF_SDRC_DM1_OFFSET			0x5a0
+#define OMAP3_CONTROL_PADCONF_SDRC_DM2_OFFSET			0x5a2
+#define OMAP3_CONTROL_PADCONF_SDRC_DM3_OFFSET			0x5a4
+
+/* 36xx only, these are SDMMC1_DAT4 - DAT7 on 34xx */
+#define OMAP3_CONTROL_PADCONF_SIM_IO_OFFSET			0x120
+#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET			0x122
+#define OMAP3_CONTROL_PADCONF_SIM_PWRCTRL_OFFSET		0x124
+#define OMAP3_CONTROL_PADCONF_SIM_RST_OFFSET			0x126
+
+#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET			0x5a8
+#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET			0x5aa
+#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET			0x5ac
+#define OMAP3_CONTROL_PADCONF_ETK_D1_OFFSET			0x5ae
+#define OMAP3_CONTROL_PADCONF_ETK_D2_OFFSET			0x5b0
+#define OMAP3_CONTROL_PADCONF_ETK_D3_OFFSET			0x5b2
+#define OMAP3_CONTROL_PADCONF_ETK_D4_OFFSET			0x5b4
+#define OMAP3_CONTROL_PADCONF_ETK_D5_OFFSET			0x5b6
+#define OMAP3_CONTROL_PADCONF_ETK_D6_OFFSET			0x5b8
+#define OMAP3_CONTROL_PADCONF_ETK_D7_OFFSET			0x5ba
+#define OMAP3_CONTROL_PADCONF_ETK_D8_OFFSET			0x5bc
+#define OMAP3_CONTROL_PADCONF_ETK_D9_OFFSET			0x5be
+#define OMAP3_CONTROL_PADCONF_ETK_D10_OFFSET			0x5c0
+#define OMAP3_CONTROL_PADCONF_ETK_D11_OFFSET			0x5c2
+#define OMAP3_CONTROL_PADCONF_ETK_D12_OFFSET			0x5c4
+#define OMAP3_CONTROL_PADCONF_ETK_D13_OFFSET			0x5c6
+#define OMAP3_CONTROL_PADCONF_ETK_D14_OFFSET			0x5c8
+#define OMAP3_CONTROL_PADCONF_ETK_D15_OFFSET			0x5ca
+#define OMAP3_CONTROL_PADCONF_I2C4_SCL_OFFSET			0x9d0
+#define OMAP3_CONTROL_PADCONF_I2C4_SDA_OFFSET			0x9d2
+#define OMAP3_CONTROL_PADCONF_SYS_32K_OFFSET			0x9d4
+#define OMAP3_CONTROL_PADCONF_SYS_CLKREQ_OFFSET			0x9d6
+#define OMAP3_CONTROL_PADCONF_SYS_NRESWARM_OFFSET		0x9d8
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT0_OFFSET			0x9da
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT1_OFFSET			0x9dc
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT2_OFFSET			0x9de
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT3_OFFSET			0x9e0
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT4_OFFSET			0x9e2
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT5_OFFSET			0x9e4
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT6_OFFSET			0x9e6
+#define OMAP3_CONTROL_PADCONF_SYS_OFF_MODE_OFFSET		0x9e8
+#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT1_OFFSET		0x9ea
+#define OMAP3_CONTROL_PADCONF_JTAG_NTRST_OFFSET			0x9ec
+#define OMAP3_CONTROL_PADCONF_JTAG_TCK_OFFSET			0x9ee
+#define OMAP3_CONTROL_PADCONF_JTAG_TMS_TMSC_OFFSET		0x9f0
+#define OMAP3_CONTROL_PADCONF_JTAG_TDI_OFFSET			0x9f2
+#define OMAP3_CONTROL_PADCONF_JTAG_EMU0_OFFSET			0x9f4
+#define OMAP3_CONTROL_PADCONF_JTAG_EMU1_OFFSET			0x9f6
+#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET		0xa1c
+#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET			0xa1e
+#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET			0xa20
+
+#define OMAP3_CONTROL_PADCONF_MUX_SIZE				\
+		(OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2)
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 4afadba09477..aa3f65c2ac97 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -27,20 +27,39 @@
  * OMAP4 specific entry point for secondary CPU to jump from ROM
  * code.  This routine also provides a holding flag into which
  * secondary core is held until we're ready for it to initialise.
- * The primary core will update the this flag using a hardware
- * register AuxCoreBoot1.
+ * The primary core will update this flag using a hardware
+ * register AuxCoreBoot0.
  */
 ENTRY(omap_secondary_startup)
-	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #0x0f
-hold:	ldr	r1, =OMAP4_AUX_CORE_BOOT1_PA	@ read from AuxCoreBoot1
-	ldr	r2, [r1]
-	cmp	r2, r0
+hold:	ldr	r12,=0x103
+	dsb
+	smc				@ read from AuxCoreBoot0
+	mov	r0, r0, lsr #9
+	mrc	p15, 0, r4, c0, c0, 5
+	and	r4, r4, #0x0f
+	cmp	r0, r4
 	bne	hold
 
 	/*
-	 * we've been released from the cpu_release,secondary_stack
+	 * we've been released from the wait loop,secondary_stack
 	 * should now contain the SVC stack for this core
 	 */
 	b	secondary_startup
+END(omap_secondary_startup)
 
+
+ENTRY(omap_modify_auxcoreboot0)
+	stmfd   sp!, {r1-r12, lr}
+	ldr	r12, =0x104
+	dsb
+	smc
+	ldmfd   sp!, {r1-r12, pc}
+END(omap_modify_auxcoreboot0)
+
+ENTRY(omap_auxcoreboot_addr)
+	stmfd   sp!, {r2-r12, lr}
+	ldr	r12, =0x105
+	dsb
+	smc
+	ldmfd   sp!, {r2-r12, pc}
+END(omap_auxcoreboot_addr)
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 48ee295db275..38153e5fbca0 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -17,20 +17,17 @@
  */
 #include <linux/init.h>
 #include <linux/device.h>
-#include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
 
+#include <asm/cacheflush.h>
 #include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
-
-/* Registers used for communicating startup information */
-#define OMAP4_AUXCOREBOOT_REG0		(OMAP44XX_VA_WKUPGEN_BASE + 0x800)
-#define OMAP4_AUXCOREBOOT_REG1		(OMAP44XX_VA_WKUPGEN_BASE + 0x804)
+#include <plat/common.h>
 
 /* SCU base address */
-static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
+static void __iomem *scu_base;
 
 /*
  * Use SCU config register to count number of cores
@@ -53,8 +50,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-
-	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	gic_cpu_init(0, gic_cpu_base_addr);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -65,8 +61,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 
 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	unsigned long timeout;
-
 	/*
 	 * Set synchronisation state between this boot processor
 	 * and the secondary one
@@ -74,18 +68,15 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	spin_lock(&boot_lock);
 
 	/*
-	 * Update the AuxCoreBoot1 with boot state for secondary core.
+	 * Update the AuxCoreBoot0 with boot state for secondary core.
 	 * omap_secondary_startup() routine will hold the secondary core till
 	 * the AuxCoreBoot1 register is updated with cpu state
 	 * A barrier is added to ensure that write buffer is drained
 	 */
-	__raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
+	omap_modify_auxcoreboot0(0x200, 0x0);
+	flush_cache_all();
 	smp_wmb();
 
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout))
-		;
-
 	/*
 	 * Now the secondary core is starting up let it run its
 	 * calibrations, then wait for it to finish
@@ -99,17 +90,18 @@ static void __init wakeup_secondary(void)
 {
 	/*
 	 * Write the address of secondary startup routine into the
-	 * AuxCoreBoot0 where ROM code will jump and start executing
+	 * AuxCoreBoot1 where ROM code will jump and start executing
 	 * on secondary core once out of WFE
 	 * A barrier is added to ensure that write buffer is drained
 	 */
-	__raw_writel(virt_to_phys(omap_secondary_startup),	   \
-					OMAP4_AUXCOREBOOT_REG0);
+	omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
 	smp_wmb();
 
 	/*
 	 * Send a 'sev' to wake the secondary core from WFE.
+	 * Drain the outstanding writes to memory
 	 */
+	dsb();
 	set_event();
 	mb();
 }
@@ -120,7 +112,13 @@ static void __init wakeup_secondary(void)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i, ncores = get_core_count();
+	unsigned int i, ncores;
+
+	/* Never released */
+	scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256);
+	BUG_ON(!scu_base);
+
+	ncores = get_core_count();
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c
index 194189c746c2..fbbcb5c83367 100644
--- a/arch/arm/mach-omap2/omap3-iommu.c
+++ b/arch/arm/mach-omap2/omap3-iommu.c
@@ -12,49 +12,52 @@
 
 #include <linux/platform_device.h>
 
-#include <mach/iommu.h>
+#include <plat/iommu.h>
 
-#define OMAP3_MMU1_BASE	0x480bd400
-#define OMAP3_MMU2_BASE	0x5d000000
-#define OMAP3_MMU1_IRQ	24
-#define OMAP3_MMU2_IRQ	28
-
-
-static unsigned long iommu_base[] __initdata = {
-	OMAP3_MMU1_BASE,
-	OMAP3_MMU2_BASE,
-};
-
-static int iommu_irq[] __initdata = {
-	OMAP3_MMU1_IRQ,
-	OMAP3_MMU2_IRQ,
+struct iommu_device {
+	resource_size_t base;
+	int irq;
+	struct iommu_platform_data pdata;
+	struct resource res[2];
 };
 
-static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = {
+static struct iommu_device devices[] = {
 	{
-		.name = "isp",
-		.nr_tlb_entries = 8,
-		.clk_name = "cam_ick",
+		.base = 0x480bd400,
+		.irq = 24,
+		.pdata = {
+			.name = "isp",
+			.nr_tlb_entries = 8,
+			.clk_name = "cam_ick",
+		},
 	},
 #if defined(CONFIG_MPU_BRIDGE_IOMMU)
 	{
-		.name = "iva2",
-		.nr_tlb_entries = 32,
-		.clk_name = "iva2_ck",
+		.base = 0x5d000000,
+		.irq = 28,
+		.pdata = {
+			.name = "iva2",
+			.nr_tlb_entries = 32,
+			.clk_name = "iva2_ck",
+		},
 	},
 #endif
 };
-#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata)
+#define NR_IOMMU_DEVICES ARRAY_SIZE(devices)
 
 static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
 
 static int __init omap3_iommu_init(void)
 {
 	int i, err;
+	struct resource res[] = {
+		{ .flags = IORESOURCE_MEM },
+		{ .flags = IORESOURCE_IRQ },
+	};
 
 	for (i = 0; i < NR_IOMMU_DEVICES; i++) {
 		struct platform_device *pdev;
-		struct resource res[2];
+		const struct iommu_device *d = &devices[i];
 
 		pdev = platform_device_alloc("omap-iommu", i);
 		if (!pdev) {
@@ -62,19 +65,16 @@ static int __init omap3_iommu_init(void)
 			goto err_out;
 		}
 
-		memset(res, 0,  sizeof(res));
-		res[0].start = iommu_base[i];
-		res[0].end = iommu_base[i] + MMU_REG_SIZE - 1;
-		res[0].flags = IORESOURCE_MEM;
-		res[1].start = res[1].end = iommu_irq[i];
-		res[1].flags = IORESOURCE_IRQ;
+		res[0].start = d->base;
+		res[0].end = d->base + MMU_REG_SIZE - 1;
+		res[1].start = res[1].end = d->irq;
 
 		err = platform_device_add_resources(pdev, res,
 						    ARRAY_SIZE(res));
 		if (err)
 			goto err_out;
-		err = platform_device_add_data(pdev, &omap3_iommu_pdata[i],
-					       sizeof(omap3_iommu_pdata[0]));
+		err = platform_device_add_data(pdev, &d->pdata,
+					       sizeof(d->pdata));
 		if (err)
 			goto err_out;
 		err = platform_device_add(pdev);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d2e0f1c95961..d8c8545875b1 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -45,11 +45,12 @@
 #include <linux/mutex.h>
 #include <linux/bootmem.h>
 
-#include <mach/cpu.h>
-#include <mach/clockdomain.h>
-#include <mach/powerdomain.h>
-#include <mach/clock.h>
-#include <mach/omap_hwmod.h>
+#include <plat/common.h>
+#include <plat/cpu.h>
+#include <plat/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/clock.h>
+#include <plat/omap_hwmod.h>
 
 #include "cm.h"
 
@@ -210,6 +211,32 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 }
 
 /**
+ * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
+ * @oh: struct omap_hwmod *
+ * @autoidle: desired AUTOIDLE bitfield value (0 or 1)
+ * @v: pointer to register contents to modify
+ *
+ * Update the module autoidle bit in @v to be @autoidle for the @oh
+ * hwmod.  The autoidle bit controls whether the module can gate
+ * internal clocks automatically when it isn't doing anything; the
+ * exact function of this bit varies on a per-module basis.  This
+ * function does not write to the hardware.  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
+				u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE))
+		return -EINVAL;
+
+	*v &= ~SYSC_AUTOIDLE_MASK;
+	*v |= autoidle << SYSC_AUTOIDLE_SHIFT;
+
+	return 0;
+}
+
+/**
  * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
  * @oh: struct omap_hwmod *
  *
@@ -326,6 +353,9 @@ static int _init_main_clk(struct omap_hwmod *oh)
 		ret = -EINVAL;
 	oh->_clk = c;
 
+	WARN(!c->clkdm, "omap_hwmod: %s: missing clockdomain for %s.\n",
+	     oh->clkdev_con_id, c->name);
+
 	return ret;
 }
 
@@ -496,6 +526,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
 	struct omap_hwmod_addr_space *mem;
 	int i;
 	int found = 0;
+	void __iomem *va_start;
 
 	if (!oh || oh->slaves_cnt == 0)
 		return NULL;
@@ -509,16 +540,20 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
 		}
 	}
 
-	/* XXX use ioremap() instead? */
-
-	if (found)
+	if (found) {
+		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
+		if (!va_start) {
+			pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+			return NULL;
+		}
 		pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
-			 oh->name, OMAP2_IO_ADDRESS(mem->pa_start));
-	else
+			 oh->name, va_start);
+	} else {
 		pr_debug("omap_hwmod: %s: no MPU register target found\n",
 			 oh->name);
+	}
 
-	return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL;
+	return (found) ? va_start : NULL;
 }
 
 /**
@@ -552,8 +587,19 @@ static void _sysc_enable(struct omap_hwmod *oh)
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
-	/* XXX OCP AUTOIDLE bit? */
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE) {
+		idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ?
+			0 : 1;
+		_set_module_autoidle(oh, idlemode, &v);
+	}
+
+	/* XXX OCP ENAWAKEUP bit? */
 
+	/*
+	 * XXX The clock framework should handle this, by
+	 * calling into this code.  But this must wait until the
+	 * clock structures are tagged with omap_hwmod entries
+	 */
 	if (oh->flags & HWMOD_SET_DEFAULT_CLOCKACT &&
 	    oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY)
 		_set_clockactivity(oh, oh->sysconfig->clockact, &v);
@@ -617,7 +663,8 @@ static void _sysc_shutdown(struct omap_hwmod *oh)
 	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE)
 		_set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v);
 
-	/* XXX clear OCP AUTOIDLE bit? */
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE)
+		_set_module_autoidle(oh, 1, &v);
 
 	_write_sysconfig(v, oh);
 }
@@ -731,7 +778,7 @@ static int _wait_target_ready(struct omap_hwmod *oh)
 static int _reset(struct omap_hwmod *oh)
 {
 	u32 r, v;
-	int c;
+	int c = 0;
 
 	if (!oh->sysconfig ||
 	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET) ||
@@ -753,13 +800,9 @@ static int _reset(struct omap_hwmod *oh)
 		return r;
 	_write_sysconfig(v, oh);
 
-	c = 0;
-	while (c < MAX_MODULE_RESET_WAIT &&
-	       !(omap_hwmod_readl(oh, oh->sysconfig->syss_offs) &
-		 SYSS_RESETDONE_MASK)) {
-		udelay(1);
-		c++;
-	}
+	omap_test_timeout((omap_hwmod_readl(oh, oh->sysconfig->syss_offs) &
+			   SYSS_RESETDONE_MASK),
+			  MAX_MODULE_RESET_WAIT, c);
 
 	if (c == MAX_MODULE_RESET_WAIT)
 		WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n",
@@ -879,33 +922,6 @@ static int _shutdown(struct omap_hwmod *oh)
 }
 
 /**
- * _write_clockact_lock - set the module's clockactivity bits
- * @oh: struct omap_hwmod *
- * @clockact: CLOCKACTIVITY field bits
- *
- * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
- * OCP_SYSCONFIG register.  Returns -EINVAL if the hwmod is in the
- * wrong state or returns 0.
- */
-static int _write_clockact_lock(struct omap_hwmod *oh, u8 clockact)
-{
-	u32 v;
-
-	if (!oh->sysconfig ||
-	    !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
-		return -EINVAL;
-
-	mutex_lock(&omap_hwmod_mutex);
-	v = oh->_sysc_cache;
-	_set_clockactivity(oh, clockact, &v);
-	_write_sysconfig(v, oh);
-	mutex_unlock(&omap_hwmod_mutex);
-
-	return 0;
-}
-
-
-/**
  * _setup - do initial configuration of omap_hwmod
  * @oh: struct omap_hwmod *
  *
@@ -943,11 +959,19 @@ static int _setup(struct omap_hwmod *oh)
 
 	_enable(oh);
 
-	if (!(oh->flags & HWMOD_INIT_NO_RESET))
-		_reset(oh);
-
-	/* XXX OCP AUTOIDLE bit? */
-	/* XXX OCP ENAWAKEUP bit? */
+	if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
+		/*
+		 * XXX Do the OCP_SYSCONFIG bits need to be
+		 * reprogrammed after a reset?  If not, then this can
+		 * be removed.  If they do, then probably the
+		 * _enable() function should be split to avoid the
+		 * rewrite of the OCP_SYSCONFIG register.
+		 */
+		if (oh->sysconfig) {
+			_update_sysc_cache(oh);
+			_sysc_enable(oh);
+		}
+	}
 
 	if (!(oh->flags & HWMOD_INIT_NO_IDLE))
 		_idle(oh);
@@ -1148,6 +1172,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
 
 	mutex_lock(&omap_hwmod_mutex);
+	iounmap(oh->_rt_va);
 	list_del(&oh->node);
 	mutex_unlock(&omap_hwmod_mutex);
 
@@ -1342,8 +1367,9 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 	/* For each IRQ, DMA, memory area, fill in array.*/
 
 	for (i = 0; i < oh->mpu_irqs_cnt; i++) {
-		(res + r)->start = *(oh->mpu_irqs + i);
-		(res + r)->end = *(oh->mpu_irqs + i);
+		(res + r)->name = (oh->mpu_irqs + i)->name;
+		(res + r)->start = (oh->mpu_irqs + i)->irq;
+		(res + r)->end = (oh->mpu_irqs + i)->irq;
 		(res + r)->flags = IORESOURCE_IRQ;
 		r++;
 	}
@@ -1448,62 +1474,6 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
 }
 
 /**
- * omap_hwmod_set_clockact_none - set clockactivity test to BOTH
- * @oh: struct omap_hwmod *
- *
- * On some modules, this function can affect the wakeup latency vs.
- * power consumption balance.  Intended to be called by the
- * omap_device layer.  Passes along the return value from
- * _write_clockact_lock().
- */
-int omap_hwmod_set_clockact_both(struct omap_hwmod *oh)
-{
-	return _write_clockact_lock(oh, CLOCKACT_TEST_BOTH);
-}
-
-/**
- * omap_hwmod_set_clockact_none - set clockactivity test to MAIN
- * @oh: struct omap_hwmod *
- *
- * On some modules, this function can affect the wakeup latency vs.
- * power consumption balance.  Intended to be called by the
- * omap_device layer.  Passes along the return value from
- * _write_clockact_lock().
- */
-int omap_hwmod_set_clockact_main(struct omap_hwmod *oh)
-{
-	return _write_clockact_lock(oh, CLOCKACT_TEST_MAIN);
-}
-
-/**
- * omap_hwmod_set_clockact_none - set clockactivity test to ICLK
- * @oh: struct omap_hwmod *
- *
- * On some modules, this function can affect the wakeup latency vs.
- * power consumption balance.  Intended to be called by the
- * omap_device layer.  Passes along the return value from
- * _write_clockact_lock().
- */
-int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh)
-{
-	return _write_clockact_lock(oh, CLOCKACT_TEST_ICLK);
-}
-
-/**
- * omap_hwmod_set_clockact_none - set clockactivity test to NONE
- * @oh: struct omap_hwmod *
- *
- * On some modules, this function can affect the wakeup latency vs.
- * power consumption balance.  Intended to be called by the
- * omap_device layer.  Passes along the return value from
- * _write_clockact_lock().
- */
-int omap_hwmod_set_clockact_none(struct omap_hwmod *oh)
-{
-	return _write_clockact_lock(oh, CLOCKACT_TEST_NONE);
-}
-
-/**
  * omap_hwmod_enable_wakeup - allow device to wake up the system
  * @oh: struct omap_hwmod *
  *
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420.h b/arch/arm/mach-omap2/omap_hwmod_2420.h
index 767e4965ac4e..a9ca1b99a301 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420.h
+++ b/arch/arm/mach-omap2/omap_hwmod_2420.h
@@ -16,10 +16,10 @@
 
 #ifdef CONFIG_ARCH_OMAP2420
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
-#include <mach/cpu.h>
-#include <mach/dma.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
 
 #include "prm-regbits-24xx.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430.h b/arch/arm/mach-omap2/omap_hwmod_2430.h
index a412be6420ec..59a208bea6c2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430.h
+++ b/arch/arm/mach-omap2/omap_hwmod_2430.h
@@ -16,10 +16,10 @@
 
 #ifdef CONFIG_ARCH_OMAP2430
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
-#include <mach/cpu.h>
-#include <mach/dma.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
 
 #include "prm-regbits-24xx.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_34xx.h b/arch/arm/mach-omap2/omap_hwmod_34xx.h
index 1e069f831575..b6076b9c364e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_34xx.h
+++ b/arch/arm/mach-omap2/omap_hwmod_34xx.h
@@ -14,10 +14,10 @@
 
 #ifdef CONFIG_ARCH_OMAP34XX
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
-#include <mach/cpu.h>
-#include <mach/dma.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
 
 #include "prm-regbits-34xx.h"
 
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
new file mode 100644
index 000000000000..126a9396b3a8
--- /dev/null
+++ b/arch/arm/mach-omap2/opp2420_data.c
@@ -0,0 +1,126 @@
+/*
+ * opp2420_data.c - old-style "OPP" table for OMAP2420
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ *
+ * XXX Missing voltage data.
+ *
+ * THe format described in this file is deprecated.  Once a reasonable
+ * OPP API exists, the data in this file should be converted to use it.
+ *
+ * This is technically part of the OMAP2xxx clock code.
+ */
+
+#include "opp2xxx.h"
+#include "sdrc.h"
+#include "clock.h"
+
+/*-------------------------------------------------------------------------
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
+ * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
+ * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * Filling in table based on H4 boards and 2430-SDPs variants available.
+ * There are quite a few more rates combinations which could be defined.
+ *
+ * When multiple values are defined the start up will try and choose the
+ * fastest one. If a 'fast' value is defined, then automatically, the /2
+ * one should be included as it can be used.	Generally having more that
+ * one fast set does not make sense, as static timings need to be changed
+ * to change the set.	 The exception is the bypass setting which is
+ * availble for low power bypass.
+ *
+ * Note: This table needs to be sorted, fastest to slowest.
+ *-------------------------------------------------------------------------*/
+const struct prcm_config omap2420_rate_table[] = {
+	/* PRCM I - FAST */
+	{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
+		RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
+		RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
+		RATE_IN_242X},
+
+	/* PRCM II - FAST */
+	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - FAST */
+	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM II - SLOW */
+	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - SLOW */
+	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+};
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
new file mode 100644
index 000000000000..edb81672c844
--- /dev/null
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -0,0 +1,133 @@
+/*
+ * opp2420_data.c - old-style "OPP" table for OMAP2420
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ *
+ * XXX Missing voltage data.
+ *
+ * THe format described in this file is deprecated.  Once a reasonable
+ * OPP API exists, the data in this file should be converted to use it.
+ *
+ * This is technically part of the OMAP2xxx clock code.
+ */
+
+#include "opp2xxx.h"
+#include "sdrc.h"
+#include "clock.h"
+
+/*-------------------------------------------------------------------------
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
+ * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
+ * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * Filling in table based on H4 boards and 2430-SDPs variants available.
+ * There are quite a few more rates combinations which could be defined.
+ *
+ * When multiple values are defined the start up will try and choose the
+ * fastest one. If a 'fast' value is defined, then automatically, the /2
+ * one should be included as it can be used.	Generally having more that
+ * one fast set does not make sense, as static timings need to be changed
+ * to change the set.	 The exception is the bypass setting which is
+ * availble for low power bypass.
+ *
+ * Note: This table needs to be sorted, fastest to slowest.
+ *-------------------------------------------------------------------------*/
+const struct prcm_config omap2430_rate_table[] = {
+	/* PRCM #4 - ratio2 (ES2.1) - FAST */
+	{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL,		/* 399MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #2 - ratio1 (ES2) - FAST */
+	{S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_165MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - FAST */
+	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - FAST */
+	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM #4 - ratio1 (ES2.1) - SLOW */
+	{S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #2 - ratio1 (ES2) - SLOW */
+	{S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_165MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - SLOW */
+	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - SLOW*/
+	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+};
diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h
new file mode 100644
index 000000000000..ed6df04e2f29
--- /dev/null
+++ b/arch/arm/mach-omap2/opp2xxx.h
@@ -0,0 +1,424 @@
+/*
+ * opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ *
+ * XXX Missing voltage data.
+ *
+ * THe format described in this file is deprecated.  Once a reasonable
+ * OPP API exists, the data in this file should be converted to use it.
+ *
+ * This is technically part of the OMAP2xxx clock code.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
+#define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
+
+/**
+ * struct prcm_config - define clock rates on a per-OPP basis (24xx)
+ *
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
+ * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * This is deprecated.  As soon as we have a decent OPP API, we should
+ * move all this stuff to it.
+ */
+struct prcm_config {
+	unsigned long xtal_speed;	/* crystal rate */
+	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
+	unsigned long mpu_speed;	/* speed of MPU */
+	unsigned long cm_clksel_mpu;	/* mpu divider */
+	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
+	unsigned long cm_clksel_gfx;	/* gfx dividers */
+	unsigned long cm_clksel1_core;	/* major subsystem dividers */
+	unsigned long cm_clksel1_pll;	/* m,n */
+	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
+	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
+	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
+	unsigned char flags;
+};
+
+
+/* Core fields for cm_clksel, not ratio governed */
+#define RX_CLKSEL_DSS1			(0x10 << 8)
+#define RX_CLKSEL_DSS2			(0x0 << 13)
+#define RX_CLKSEL_SSI			(0x5 << 20)
+
+/*-------------------------------------------------------------------------
+ * Voltage/DPLL ratios
+ *-------------------------------------------------------------------------*/
+
+/* 2430 Ratio's, 2430-Ratio Config 1 */
+#define R1_CLKSEL_L3			(4 << 0)
+#define R1_CLKSEL_L4			(2 << 5)
+#define R1_CLKSEL_USB			(4 << 25)
+#define R1_CM_CLKSEL1_CORE_VAL		(R1_CLKSEL_USB | RX_CLKSEL_SSI | \
+					 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					 R1_CLKSEL_L4 | R1_CLKSEL_L3)
+#define R1_CLKSEL_MPU			(2 << 0)
+#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
+#define R1_CLKSEL_DSP			(2 << 0)
+#define R1_CLKSEL_DSP_IF		(2 << 5)
+#define R1_CM_CLKSEL_DSP_VAL		(R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF)
+#define R1_CLKSEL_GFX			(2 << 0)
+#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
+#define R1_CLKSEL_MDM			(4 << 0)
+#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
+
+/* 2430-Ratio Config 2 */
+#define R2_CLKSEL_L3			(6 << 0)
+#define R2_CLKSEL_L4			(2 << 5)
+#define R2_CLKSEL_USB			(2 << 25)
+#define R2_CM_CLKSEL1_CORE_VAL		(R2_CLKSEL_USB | RX_CLKSEL_SSI | \
+					 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					 R2_CLKSEL_L4 | R2_CLKSEL_L3)
+#define R2_CLKSEL_MPU			(2 << 0)
+#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
+#define R2_CLKSEL_DSP			(2 << 0)
+#define R2_CLKSEL_DSP_IF		(3 << 5)
+#define R2_CM_CLKSEL_DSP_VAL		(R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF)
+#define R2_CLKSEL_GFX			(2 << 0)
+#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
+#define R2_CLKSEL_MDM			(6 << 0)
+#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
+
+/* 2430-Ratio Bootm (BYPASS) */
+#define RB_CLKSEL_L3			(1 << 0)
+#define RB_CLKSEL_L4			(1 << 5)
+#define RB_CLKSEL_USB			(1 << 25)
+#define RB_CM_CLKSEL1_CORE_VAL		(RB_CLKSEL_USB | RX_CLKSEL_SSI | \
+					 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					 RB_CLKSEL_L4 | RB_CLKSEL_L3)
+#define RB_CLKSEL_MPU			(1 << 0)
+#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
+#define RB_CLKSEL_DSP			(1 << 0)
+#define RB_CLKSEL_DSP_IF		(1 << 5)
+#define RB_CM_CLKSEL_DSP_VAL		(RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF)
+#define RB_CLKSEL_GFX			(1 << 0)
+#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
+#define RB_CLKSEL_MDM			(1 << 0)
+#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
+
+/* 2420 Ratio Equivalents */
+#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
+#define RXX_CLKSEL_SSI			(0x8 << 20)
+
+/* 2420-PRCM III 532MHz core */
+#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
+#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
+#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
+#define RIII_CM_CLKSEL1_CORE_VAL	(RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+					 RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+					 RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
+					 RIII_CLKSEL_L3)
+#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
+#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
+#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
+#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
+#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
+#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
+#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
+#define RIII_CM_CLKSEL_DSP_VAL		(RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
+					 RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
+					 RIII_CLKSEL_DSP)
+#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
+#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
+
+/* 2420-PRCM II 600MHz core */
+#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
+#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
+#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
+#define RII_CM_CLKSEL1_CORE_VAL		(RII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+					 RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+					 RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \
+					 RII_CLKSEL_L3)
+#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
+#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
+#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
+#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
+#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
+#define RII_CLKSEL_IVA			(3 << 8)	/* iva1 - 200MHz */
+#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
+#define RII_CM_CLKSEL_DSP_VAL		(RII_SYNC_IVA | RII_CLKSEL_IVA | \
+					 RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
+					 RII_CLKSEL_DSP)
+#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
+#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
+
+/* 2420-PRCM I 660MHz core */
+#define RI_CLKSEL_L3			(4 << 0)	/* 165MHz */
+#define RI_CLKSEL_L4			(2 << 5)	/* 82.5MHz */
+#define RI_CLKSEL_USB			(4 << 25)	/* 41.25MHz */
+#define RI_CM_CLKSEL1_CORE_VAL		(RI_CLKSEL_USB |		\
+					 RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
+					 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					 RI_CLKSEL_L4 | RI_CLKSEL_L3)
+#define RI_CLKSEL_MPU			(2 << 0)	/* 330MHz */
+#define RI_CM_CLKSEL_MPU_VAL		RI_CLKSEL_MPU
+#define RI_CLKSEL_DSP			(3 << 0)	/* c5x - 220MHz */
+#define RI_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 110MHz */
+#define RI_SYNC_DSP			(1 << 7)	/* Activate sync */
+#define RI_CLKSEL_IVA			(4 << 8)	/* iva1 - 165MHz */
+#define RI_SYNC_IVA			(0 << 13)	/* Bypass sync */
+#define RI_CM_CLKSEL_DSP_VAL		(RI_SYNC_IVA | RI_CLKSEL_IVA |	\
+					 RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
+					 RI_CLKSEL_DSP)
+#define RI_CLKSEL_GFX			(1 << 0)	/* 165MHz */
+#define RI_CM_CLKSEL_GFX_VAL		RI_CLKSEL_GFX
+
+/* 2420-PRCM VII (boot) */
+#define RVII_CLKSEL_L3			(1 << 0)
+#define RVII_CLKSEL_L4			(1 << 5)
+#define RVII_CLKSEL_DSS1		(1 << 8)
+#define RVII_CLKSEL_DSS2		(0 << 13)
+#define RVII_CLKSEL_VLYNQ		(1 << 15)
+#define RVII_CLKSEL_SSI			(1 << 20)
+#define RVII_CLKSEL_USB			(1 << 25)
+
+#define RVII_CM_CLKSEL1_CORE_VAL	(RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
+					 RVII_CLKSEL_VLYNQ | \
+					 RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \
+					 RVII_CLKSEL_L4 | RVII_CLKSEL_L3)
+
+#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
+#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
+
+#define RVII_CLKSEL_DSP			(1 << 0)
+#define RVII_CLKSEL_DSP_IF		(1 << 5)
+#define RVII_SYNC_DSP			(0 << 7)
+#define RVII_CLKSEL_IVA			(1 << 8)
+#define RVII_SYNC_IVA			(0 << 13)
+#define RVII_CM_CLKSEL_DSP_VAL		(RVII_SYNC_IVA | RVII_CLKSEL_IVA | \
+					 RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \
+					 RVII_CLKSEL_DSP)
+
+#define RVII_CLKSEL_GFX			(1 << 0)
+#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
+
+/*-------------------------------------------------------------------------
+ * 2430 Target modes: Along with each configuration the CPU has several
+ * modes which goes along with them. Modes mainly are the addition of
+ * describe DPLL combinations to go along with a ratio.
+ *-------------------------------------------------------------------------*/
+
+/* Hardware governed */
+#define MX_48M_SRC			(0 << 3)
+#define MX_54M_SRC			(0 << 5)
+#define MX_APLLS_CLIKIN_12		(3 << 23)
+#define MX_APLLS_CLIKIN_13		(2 << 23)
+#define MX_APLLS_CLIKIN_19_2		(0 << 23)
+
+/*
+ * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
+ * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
+ */
+#define M5A_DPLL_MULT_12		(133 << 12)
+#define M5A_DPLL_DIV_12			(5 << 8)
+#define M5A_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+#define M5A_DPLL_MULT_13		(61 << 12)
+#define M5A_DPLL_DIV_13			(2 << 8)
+#define M5A_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
+					 MX_APLLS_CLIKIN_13)
+#define M5A_DPLL_MULT_19		(55 << 12)
+#define M5A_DPLL_DIV_19			(3 << 8)
+#define M5A_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
+					 MX_APLLS_CLIKIN_19_2)
+/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
+#define M5B_DPLL_MULT_12		(50 << 12)
+#define M5B_DPLL_DIV_12			(2 << 8)
+#define M5B_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+#define M5B_DPLL_MULT_13		(200 << 12)
+#define M5B_DPLL_DIV_13			(12 << 8)
+
+#define M5B_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
+					 MX_APLLS_CLIKIN_13)
+#define M5B_DPLL_MULT_19		(125 << 12)
+#define M5B_DPLL_DIV_19			(31 << 8)
+#define M5B_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
+					 MX_APLLS_CLIKIN_19_2)
+/*
+ * #4	(ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
+ */
+#define M4_DPLL_MULT_12			(133 << 12)
+#define M4_DPLL_DIV_12			(3 << 8)
+#define M4_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+
+#define M4_DPLL_MULT_13			(399 << 12)
+#define M4_DPLL_DIV_13			(12 << 8)
+#define M4_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
+					 MX_APLLS_CLIKIN_13)
+
+#define M4_DPLL_MULT_19			(145 << 12)
+#define M4_DPLL_DIV_19			(6 << 8)
+#define M4_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
+					 MX_APLLS_CLIKIN_19_2)
+
+/*
+ * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
+ */
+#define M3_DPLL_MULT_12			(55 << 12)
+#define M3_DPLL_DIV_12			(1 << 8)
+#define M3_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+#define M3_DPLL_MULT_13			(76 << 12)
+#define M3_DPLL_DIV_13			(2 << 8)
+#define M3_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
+					 MX_APLLS_CLIKIN_13)
+#define M3_DPLL_MULT_19			(17 << 12)
+#define M3_DPLL_DIV_19			(0 << 8)
+#define M3_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
+					 MX_APLLS_CLIKIN_19_2)
+
+/*
+ * #2   (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
+ */
+#define M2_DPLL_MULT_12		        (55 << 12)
+#define M2_DPLL_DIV_12		        (1 << 8)
+#define M2_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+
+/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
+ * relock time issue */
+/* Core frequency changed from 330/165 to 329/164 MHz*/
+#define M2_DPLL_MULT_13		        (76 << 12)
+#define M2_DPLL_DIV_13		        (2 << 8)
+#define M2_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
+					 MX_APLLS_CLIKIN_13)
+
+#define M2_DPLL_MULT_19		        (17 << 12)
+#define M2_DPLL_DIV_19		        (0 << 8)
+#define M2_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
+					 MX_APLLS_CLIKIN_19_2)
+
+/* boot (boot) */
+#define MB_DPLL_MULT			(1 << 12)
+#define MB_DPLL_DIV			(0 << 8)
+#define MB_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 MB_DPLL_DIV | MB_DPLL_MULT | \
+					 MX_APLLS_CLIKIN_12)
+
+#define MB_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 MB_DPLL_DIV | MB_DPLL_MULT | \
+					 MX_APLLS_CLIKIN_13)
+
+#define MB_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 MB_DPLL_DIV | MB_DPLL_MULT | \
+					 MX_APLLS_CLIKIN_19)
+
+/*
+ * 2430 - chassis (sedna)
+ * 165 (ratio1) same as above #2
+ * 150 (ratio1)
+ * 133 (ratio2) same as above #4
+ * 110 (ratio2) same as above #3
+ * 104 (ratio2)
+ * boot (boot)
+ */
+
+/* PRCM I target DPLL = 2*330MHz = 660MHz */
+#define MI_DPLL_MULT_12			(55 << 12)
+#define MI_DPLL_DIV_12			(1 << 8)
+#define MI_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+
+/*
+ * 2420 Equivalent - mode registers
+ * PRCM II , target DPLL = 2*300MHz = 600MHz
+ */
+#define MII_DPLL_MULT_12		(50 << 12)
+#define MII_DPLL_DIV_12			(1 << 8)
+#define MII_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC |	\
+					 MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+#define MII_DPLL_MULT_13		(300 << 12)
+#define MII_DPLL_DIV_13			(12 << 8)
+#define MII_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC |	\
+					 MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
+					 MX_APLLS_CLIKIN_13)
+
+/* PRCM III target DPLL = 2*266 = 532MHz*/
+#define MIII_DPLL_MULT_12		(133 << 12)
+#define MIII_DPLL_DIV_12		(5 << 8)
+#define MIII_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC |	\
+					 MIII_DPLL_DIV_12 | \
+					 MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12)
+#define MIII_DPLL_MULT_13		(266 << 12)
+#define MIII_DPLL_DIV_13		(12 << 8)
+#define MIII_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC |	\
+					 MIII_DPLL_DIV_13 | \
+					 MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13)
+
+/* PRCM VII (boot bypass) */
+#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
+#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
+
+/* High and low operation value */
+#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
+#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
+
+/* MPU speed defines */
+#define S12M	12000000
+#define S13M	13000000
+#define S19M	19200000
+#define S26M	26000000
+#define S100M	100000000
+#define S133M	133000000
+#define S150M	150000000
+#define S164M	164000000
+#define S165M	165000000
+#define S199M	199000000
+#define S200M	200000000
+#define S266M	266000000
+#define S300M	300000000
+#define S329M	329000000
+#define S330M	330000000
+#define S399M	399000000
+#define S400M	400000000
+#define S532M	532000000
+#define S600M	600000000
+#define S658M	658000000
+#define S660M	660000000
+#define S798M	798000000
+
+
+extern const struct prcm_config omap2420_rate_table[];
+extern const struct prcm_config omap2430_rate_table[];
+extern const struct prcm_config *rate_table;
+extern const struct prcm_config *curr_prcm_set;
+
+#endif
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 2fc4d6abbd0a..860b755d2220 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -26,10 +26,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 
-#include <mach/clock.h>
-#include <mach/board.h>
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/clock.h>
+#include <plat/board.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 #include "prm.h"
 #include "cm.h"
@@ -51,7 +51,8 @@ int omap2_pm_debug;
 	regs[reg_count++].val = __raw_readl(reg)
 #define DUMP_INTC_REG(reg, off) \
 	regs[reg_count].name = #reg; \
-	regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
+	regs[reg_count++].val = \
+			 __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
 
 static int __init pm_dbg_init(void);
 
@@ -325,7 +326,7 @@ int pm_dbg_regset_save(int reg_set)
 	return 0;
 }
 
-static const char pwrdm_state_names[][4] = {
+static const char pwrdm_state_names[][PWRDM_MAX_PWRSTS] = {
 	"OFF",
 	"RET",
 	"INA",
@@ -380,7 +381,7 @@ static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user)
 
 	seq_printf(s, "%s (%s)", pwrdm->name,
 			pwrdm_state_names[pwrdm->state]);
-	for (i = 0; i < 4; i++)
+	for (i = 0; i < PWRDM_MAX_PWRSTS; i++)
 		seq_printf(s, ",%s:%d", pwrdm_state_names[i],
 			pwrdm->state_counter[i]);
 
@@ -526,6 +527,29 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
 	return 0;
 }
 
+static int option_get(void *data, u64 *val)
+{
+	u32 *option = data;
+
+	*val = *option;
+
+	return 0;
+}
+
+static int option_set(void *data, u64 val)
+{
+	u32 *option = data;
+
+	*option = val;
+
+	if (option == &enable_off_mode)
+		omap3_pm_off_mode_enable(val);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n");
+
 static int __init pm_dbg_init(void)
 {
 	int i;
@@ -568,6 +592,12 @@ static int __init pm_dbg_init(void)
 
 		}
 
+	(void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUGO, d,
+				   &enable_off_mode, &pm_dbg_option_fops);
+	(void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d,
+				   &sleep_while_idle, &pm_dbg_option_fops);
+	(void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d,
+				   &wakeup_timer_seconds, &pm_dbg_option_fops);
 	pm_dbg_init_done = 1;
 
 	return 0;
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 8400f5768923..0bf345db7147 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,11 +11,24 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
+
+extern u32 enable_off_mode;
+extern u32 sleep_while_idle;
+
+extern void *omap3_secure_ram_storage;
+extern void omap3_pm_off_mode_enable(int);
+extern void omap_sram_idle(void);
+extern int omap3_can_sleep(void);
+extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
+extern int omap3_idle_init(void);
 
 extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
 
+extern u32 wakeup_timer_seconds;
+extern struct omap_dm_timer *gptimer_wakeup;
+
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
@@ -36,6 +49,7 @@ extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
 					void __iomem *sdrc_power);
 extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
 extern void save_secure_ram_context(u32 *addr);
+extern void omap3_save_scratchpad_contents(void);
 
 extern unsigned int omap24xx_idle_loop_suspend_sz;
 extern unsigned int omap34xx_suspend_sz;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index bff5c4e89742..cba05b9f041f 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -36,12 +36,12 @@
 #include <asm/mach-types.h>
 
 #include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/control.h>
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/board.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/control.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/board.h>
 
 #include "prm.h"
 #include "prm-regbits-24xx.h"
@@ -50,8 +50,8 @@
 #include "sdrc.h"
 #include "pm.h"
 
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 89463190923a..81ed252a0f8a 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -5,6 +5,9 @@
  * Tony Lindgren <tony@atomide.com>
  * Jouni Hogander
  *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
  * Copyright (C) 2005 Texas Instruments, Inc.
  * Richard Woodruff <r-woodruff2@ti.com>
  *
@@ -22,12 +25,20 @@
 #include <linux/list.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/clk.h>
+
+#include <plat/sram.h>
+#include <plat/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/control.h>
+#include <plat/serial.h>
+#include <plat/sdrc.h>
+#include <plat/prcm.h>
+#include <plat/gpmc.h>
+#include <plat/dma.h>
+#include <plat/dmtimer.h>
 
-#include <mach/sram.h>
-#include <mach/clockdomain.h>
-#include <mach/powerdomain.h>
-#include <mach/control.h>
-#include <mach/serial.h>
+#include <asm/tlbflush.h>
 
 #include "cm.h"
 #include "cm-regbits-34xx.h"
@@ -35,6 +46,16 @@
 
 #include "prm.h"
 #include "pm.h"
+#include "sdrc.h"
+
+/* Scratchpad offsets */
+#define OMAP343X_TABLE_ADDRESS_OFFSET	   0x31
+#define OMAP343X_TABLE_VALUE_OFFSET	   0x30
+#define OMAP343X_CONTROL_REG_VALUE_OFFSET  0x32
+
+u32 enable_off_mode;
+u32 sleep_while_idle;
+u32 wakeup_timer_seconds;
 
 struct power_state {
 	struct powerdomain *pwrdm;
@@ -49,7 +70,112 @@ static LIST_HEAD(pwrst_list);
 
 static void (*_omap_sram_idle)(u32 *addr, int save_state);
 
-static struct powerdomain *mpu_pwrdm;
+static int (*_omap_save_secure_sram)(u32 *addr);
+
+static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
+static struct powerdomain *core_pwrdm, *per_pwrdm;
+static struct powerdomain *cam_pwrdm;
+
+static inline void omap3_per_save_context(void)
+{
+	omap_gpio_save_context();
+}
+
+static inline void omap3_per_restore_context(void)
+{
+	omap_gpio_restore_context();
+}
+
+static void omap3_enable_io_chain(void)
+{
+	int timeout = 0;
+
+	if (omap_rev() >= OMAP3430_REV_ES3_1) {
+		prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN);
+		/* Do a readback to assure write has been done */
+		prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+
+		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+			 OMAP3430_ST_IO_CHAIN)) {
+			timeout++;
+			if (timeout > 1000) {
+				printk(KERN_ERR "Wake up daisy chain "
+				       "activation failed.\n");
+				return;
+			}
+			prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN,
+					     WKUP_MOD, PM_WKST);
+		}
+	}
+}
+
+static void omap3_disable_io_chain(void)
+{
+	if (omap_rev() >= OMAP3430_REV_ES3_1)
+		prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN);
+}
+
+static void omap3_core_save_context(void)
+{
+	u32 control_padconf_off;
+
+	/* Save the padconf registers */
+	control_padconf_off = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
+	control_padconf_off |= START_PADCONF_SAVE;
+	omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
+	/* wait for the save to complete */
+	while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
+			& PADCONF_SAVE_DONE)
+		;
+	/* Save the Interrupt controller context */
+	omap_intc_save_context();
+	/* Save the GPMC context */
+	omap3_gpmc_save_context();
+	/* Save the system control module context, padconf already save above*/
+	omap3_control_save_context();
+	omap_dma_global_context_save();
+}
+
+static void omap3_core_restore_context(void)
+{
+	/* Restore the control module context, padconf restored by h/w */
+	omap3_control_restore_context();
+	/* Restore the GPMC context */
+	omap3_gpmc_restore_context();
+	/* Restore the interrupt controller context */
+	omap_intc_restore_context();
+	omap_dma_global_context_restore();
+}
+
+/*
+ * FIXME: This function should be called before entering off-mode after
+ * OMAP3 secure services have been accessed. Currently it is only called
+ * once during boot sequence, but this works as we are not using secure
+ * services.
+ */
+static void omap3_save_secure_ram_context(u32 target_mpu_state)
+{
+	u32 ret;
+
+	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+		/*
+		 * MPU next state must be set to POWER_ON temporarily,
+		 * otherwise the WFI executed inside the ROM code
+		 * will hang the system.
+		 */
+		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
+		ret = _omap_save_secure_sram((u32 *)
+				__pa(omap3_secure_ram_storage));
+		pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state);
+		/* Following is for error tracking, it should not happen */
+		if (ret) {
+			printk(KERN_ERR "save_secure_sram() returns %08x\n",
+				ret);
+			while (1)
+				;
+		}
+	}
+}
 
 /*
  * PRCM Interrupt Handler Helper Function
@@ -161,7 +287,36 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void omap_sram_idle(void)
+static void restore_control_register(u32 val)
+{
+	__asm__ __volatile__ ("mcr p15, 0, %0, c1, c0, 0" : : "r" (val));
+}
+
+/* Function to restore the table entry that was modified for enabling MMU */
+static void restore_table_entry(void)
+{
+	u32 *scratchpad_address;
+	u32 previous_value, control_reg_value;
+	u32 *address;
+
+	scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
+
+	/* Get address of entry that was modified */
+	address = (u32 *)__raw_readl(scratchpad_address +
+				     OMAP343X_TABLE_ADDRESS_OFFSET);
+	/* Get the previous value which needs to be restored */
+	previous_value = __raw_readl(scratchpad_address +
+				     OMAP343X_TABLE_VALUE_OFFSET);
+	address = __va(address);
+	*address = previous_value;
+	flush_tlb_all();
+	control_reg_value = __raw_readl(scratchpad_address
+					+ OMAP343X_CONTROL_REG_VALUE_OFFSET);
+	/* This will enable caches and prediction */
+	restore_control_register(control_reg_value);
+}
+
+void omap_sram_idle(void)
 {
 	/* Variable to tell what needs to be saved and restored
 	 * in omap_sram_idle*/
@@ -169,17 +324,32 @@ static void omap_sram_idle(void)
 	/* save_state = 1 => Only L1 and logic lost */
 	/* save_state = 2 => Only L2 lost */
 	/* save_state = 3 => L1, L2 and logic lost */
-	int save_state = 0, mpu_next_state;
+	int save_state = 0;
+	int mpu_next_state = PWRDM_POWER_ON;
+	int per_next_state = PWRDM_POWER_ON;
+	int core_next_state = PWRDM_POWER_ON;
+	int core_prev_state, per_prev_state;
+	u32 sdrc_pwr = 0;
+	int per_state_modified = 0;
 
 	if (!_omap_sram_idle)
 		return;
 
+	pwrdm_clear_all_prev_pwrst(mpu_pwrdm);
+	pwrdm_clear_all_prev_pwrst(neon_pwrdm);
+	pwrdm_clear_all_prev_pwrst(core_pwrdm);
+	pwrdm_clear_all_prev_pwrst(per_pwrdm);
+
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 	switch (mpu_next_state) {
+	case PWRDM_POWER_ON:
 	case PWRDM_POWER_RET:
 		/* No need to save context */
 		save_state = 0;
 		break;
+	case PWRDM_POWER_OFF:
+		save_state = 3;
+		break;
 	default:
 		/* Invalid state */
 		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
@@ -187,68 +357,115 @@ static void omap_sram_idle(void)
 	}
 	pwrdm_pre_transition();
 
-	omap2_gpio_prepare_for_retention();
-	omap_uart_prepare_idle(0);
-	omap_uart_prepare_idle(1);
-	omap_uart_prepare_idle(2);
+	/* NEON control */
+	if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
+		pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state);
+
+	/* PER */
+	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
+	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
+	if (per_next_state < PWRDM_POWER_ON) {
+		omap_uart_prepare_idle(2);
+		omap2_gpio_prepare_for_retention();
+		if (per_next_state == PWRDM_POWER_OFF) {
+			if (core_next_state == PWRDM_POWER_ON) {
+				per_next_state = PWRDM_POWER_RET;
+				pwrdm_set_next_pwrst(per_pwrdm, per_next_state);
+				per_state_modified = 1;
+			} else
+				omap3_per_save_context();
+		}
+	}
+
+	if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON)
+		omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]);
+
+	/* CORE */
+	if (core_next_state < PWRDM_POWER_ON) {
+		omap_uart_prepare_idle(0);
+		omap_uart_prepare_idle(1);
+		if (core_next_state == PWRDM_POWER_OFF) {
+			omap3_core_save_context();
+			omap3_prcm_save_context();
+		}
+		/* Enable IO-PAD and IO-CHAIN wakeups */
+		prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+		omap3_enable_io_chain();
+	}
+
+	/*
+	* On EMU/HS devices ROM code restores a SRDC value
+	* from scratchpad which has automatic self refresh on timeout
+	* of AUTO_CNT = 1 enabled. This takes care of errata 1.142.
+	* Hence store/restore the SDRC_POWER register here.
+	*/
+	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
+	    omap_type() != OMAP2_DEVICE_TYPE_GP &&
+	    core_next_state == PWRDM_POWER_OFF)
+		sdrc_pwr = sdrc_read_reg(SDRC_POWER);
 
-	_omap_sram_idle(NULL, save_state);
+	/*
+	 * omap3_arm_context is the location where ARM registers
+	 * get saved. The restore path then reads from this
+	 * location and restores them back.
+	 */
+	_omap_sram_idle(omap3_arm_context, save_state);
 	cpu_init();
 
-	omap_uart_resume_idle(2);
-	omap_uart_resume_idle(1);
-	omap_uart_resume_idle(0);
-	omap2_gpio_resume_after_retention();
+	/* Restore normal SDRC POWER settings */
+	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
+	    omap_type() != OMAP2_DEVICE_TYPE_GP &&
+	    core_next_state == PWRDM_POWER_OFF)
+		sdrc_write_reg(sdrc_pwr, SDRC_POWER);
+
+	/* Restore table entry modified during MMU restoration */
+	if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF)
+		restore_table_entry();
+
+	/* CORE */
+	if (core_next_state < PWRDM_POWER_ON) {
+		core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
+		if (core_prev_state == PWRDM_POWER_OFF) {
+			omap3_core_restore_context();
+			omap3_prcm_restore_context();
+			omap3_sram_restore_context();
+			omap2_sms_restore_context();
+		}
+		omap_uart_resume_idle(0);
+		omap_uart_resume_idle(1);
+		if (core_next_state == PWRDM_POWER_OFF)
+			prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF,
+					       OMAP3430_GR_MOD,
+					       OMAP3_PRM_VOLTCTRL_OFFSET);
+	}
 
-	pwrdm_post_transition();
+	/* PER */
+	if (per_next_state < PWRDM_POWER_ON) {
+		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
+		if (per_prev_state == PWRDM_POWER_OFF)
+			omap3_per_restore_context();
+		omap2_gpio_resume_after_retention();
+		omap_uart_resume_idle(2);
+		if (per_state_modified)
+			pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);
+	}
 
-}
+	/* Disable IO-PAD and IO-CHAIN wakeup */
+	if (core_next_state < PWRDM_POWER_ON) {
+		prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+		omap3_disable_io_chain();
+	}
 
-/*
- * Check if functional clocks are enabled before entering
- * sleep. This function could be behind CONFIG_PM_DEBUG
- * when all drivers are configuring their sysconfig registers
- * properly and using their clocks properly.
- */
-static int omap3_fclks_active(void)
-{
-	u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
-		fck_cam = 0, fck_per = 0, fck_usbhost = 0;
+	pwrdm_post_transition();
 
-	fck_core1 = cm_read_mod_reg(CORE_MOD,
-				    CM_FCLKEN1);
-	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		fck_core3 = cm_read_mod_reg(CORE_MOD,
-					    OMAP3430ES2_CM_FCLKEN3);
-		fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
-					  CM_FCLKEN);
-		fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-					      CM_FCLKEN);
-	} else
-		fck_sgx = cm_read_mod_reg(GFX_MOD,
-					  OMAP3430ES2_CM_FCLKEN3);
-	fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
-				  CM_FCLKEN);
-	fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
-				  CM_FCLKEN);
-	fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
-				  CM_FCLKEN);
-
-	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
-	fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
-	fck_per &= ~OMAP3430_EN_UART3;
-
-	if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
-	    fck_cam | fck_per | fck_usbhost)
-		return 1;
-	return 0;
+	omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
 }
 
-static int omap3_can_sleep(void)
+int omap3_can_sleep(void)
 {
-	if (!omap_uart_can_sleep())
+	if (!sleep_while_idle)
 		return 0;
-	if (omap3_fclks_active())
+	if (!omap_uart_can_sleep())
 		return 0;
 	return 1;
 }
@@ -256,7 +473,7 @@ static int omap3_can_sleep(void)
 /* This sets pwrdm state (other than mpu & core. Currently only ON &
  * RET are supported. Function is assuming that clkdm doesn't have
  * hw_sup mode enabled. */
-static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 {
 	u32 cur_state;
 	int sleep_switch = 0;
@@ -306,7 +523,7 @@ static void omap3_pm_idle(void)
 	if (!omap3_can_sleep())
 		goto out;
 
-	if (omap_irq_pending())
+	if (omap_irq_pending() || need_resched())
 		goto out;
 
 	omap_sram_idle();
@@ -319,6 +536,22 @@ out:
 #ifdef CONFIG_SUSPEND
 static suspend_state_t suspend_state;
 
+static void omap2_pm_wakeup_on_timer(u32 seconds)
+{
+	u32 tick_rate, cycles;
+
+	if (!seconds)
+		return;
+
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+	cycles = tick_rate * seconds;
+	omap_dm_timer_stop(gptimer_wakeup);
+	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+	pr_info("PM: Resume timer in %d secs (%d ticks at %d ticks/sec.)\n",
+		seconds, cycles, tick_rate);
+}
+
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
@@ -330,6 +563,9 @@ static int omap3_pm_suspend(void)
 	struct power_state *pwrst;
 	int state, ret = 0;
 
+	if (wakeup_timer_seconds)
+		omap2_pm_wakeup_on_timer(wakeup_timer_seconds);
+
 	/* Read current next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node)
 		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
@@ -690,6 +926,22 @@ static void __init prcm_setup_regs(void)
 	omap3_d2d_idle();
 }
 
+void omap3_pm_off_mode_enable(int enable)
+{
+	struct power_state *pwrst;
+	u32 state;
+
+	if (enable)
+		state = PWRDM_POWER_OFF;
+	else
+		state = PWRDM_POWER_RET;
+
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		pwrst->next_state = state;
+		set_pwrdm_state(pwrst->pwrdm, state);
+	}
+}
+
 int omap3_pm_get_suspend_state(struct powerdomain *pwrdm)
 {
 	struct power_state *pwrst;
@@ -749,6 +1001,15 @@ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 	return 0;
 }
 
+void omap_push_sram_idle(void)
+{
+	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
+					omap34xx_cpu_suspend_sz);
+	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
+		_omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
+				save_secure_ram_context_sz);
+}
+
 static int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
@@ -786,15 +1047,47 @@ static int __init omap3_pm_init(void)
 		goto err2;
 	}
 
-	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
-					 omap34xx_cpu_suspend_sz);
+	neon_pwrdm = pwrdm_lookup("neon_pwrdm");
+	per_pwrdm = pwrdm_lookup("per_pwrdm");
+	core_pwrdm = pwrdm_lookup("core_pwrdm");
+	cam_pwrdm = pwrdm_lookup("cam_pwrdm");
 
+	omap_push_sram_idle();
 #ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
 #endif /* CONFIG_SUSPEND */
 
 	pm_idle = omap3_pm_idle;
+	omap3_idle_init();
+
+	pwrdm_add_wkdep(neon_pwrdm, mpu_pwrdm);
+	/*
+	 * REVISIT: This wkdep is only necessary when GPIO2-6 are enabled for
+	 * IO-pad wakeup.  Otherwise it will unnecessarily waste power
+	 * waking up PER with every CORE wakeup - see
+	 * http://marc.info/?l=linux-omap&m=121852150710062&w=2
+	*/
+	pwrdm_add_wkdep(per_pwrdm, core_pwrdm);
+
+	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+		omap3_secure_ram_storage =
+			kmalloc(0x803F, GFP_KERNEL);
+		if (!omap3_secure_ram_storage)
+			printk(KERN_ERR "Memory allocation failed when"
+					"allocating for secure sram context\n");
+
+		local_irq_disable();
+		local_fiq_disable();
+
+		omap_dma_global_context_save();
+		omap3_save_secure_ram_context(PWRDM_POWER_ON);
+		omap_dma_global_context_restore();
+
+		local_irq_enable();
+		local_fiq_enable();
+	}
 
+	omap3_save_scratchpad_contents();
 err1:
 	return ret;
 err2:
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index f00289abd30f..26b3f3ee82a3 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -10,9 +10,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifdef CONFIG_OMAP_DEBUG_POWERDOMAIN
-# define DEBUG
-#endif
+#undef DEBUG
 
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -31,9 +29,9 @@
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 
-#include <mach/cpu.h>
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/cpu.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 #include "pm.h"
 
@@ -160,7 +158,7 @@ static __init void _pwrdm_setup(struct powerdomain *pwrdm)
 {
 	int i;
 
-	for (i = 0; i < 4; i++)
+	for (i = 0; i < PWRDM_MAX_PWRSTS; i++)
 		pwrdm->state_counter[i] = 0;
 
 	pwrdm_wait_transition(pwrdm);
@@ -480,7 +478,7 @@ int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 	if (IS_ERR(p)) {
 		pr_debug("powerdomain: hardware cannot set/clear wake up of "
 			 "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
-		return IS_ERR(p);
+		return PTR_ERR(p);
 	}
 
 	pr_debug("powerdomain: hardware will wake up %s when %s wakes up\n",
@@ -513,7 +511,7 @@ int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 	if (IS_ERR(p)) {
 		pr_debug("powerdomain: hardware cannot set/clear wake up of "
 			 "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
-		return IS_ERR(p);
+		return PTR_ERR(p);
 	}
 
 	pr_debug("powerdomain: hardware will no longer wake up %s after %s "
@@ -550,7 +548,7 @@ int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 	if (IS_ERR(p)) {
 		pr_debug("powerdomain: hardware cannot set/clear wake up of "
 			 "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
-		return IS_ERR(p);
+		return PTR_ERR(p);
 	}
 
 	return prm_read_mod_bits_shift(pwrdm1->prcm_offs, PM_WKDEP,
@@ -573,10 +571,10 @@ int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 {
 	struct powerdomain *p;
 
-	if (!pwrdm1)
+	if (!cpu_is_omap34xx())
 		return -EINVAL;
 
-	if (!cpu_is_omap34xx())
+	if (!pwrdm1)
 		return -EINVAL;
 
 	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
@@ -584,7 +582,7 @@ int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 		pr_debug("powerdomain: hardware cannot set/clear sleep "
 			 "dependency affecting %s from %s\n", pwrdm1->name,
 			 pwrdm2->name);
-		return IS_ERR(p);
+		return PTR_ERR(p);
 	}
 
 	pr_debug("powerdomain: will prevent %s from sleeping if %s is active\n",
@@ -612,10 +610,10 @@ int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 {
 	struct powerdomain *p;
 
-	if (!pwrdm1)
+	if (!cpu_is_omap34xx())
 		return -EINVAL;
 
-	if (!cpu_is_omap34xx())
+	if (!pwrdm1)
 		return -EINVAL;
 
 	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
@@ -623,7 +621,7 @@ int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 		pr_debug("powerdomain: hardware cannot set/clear sleep "
 			 "dependency affecting %s from %s\n", pwrdm1->name,
 			 pwrdm2->name);
-		return IS_ERR(p);
+		return PTR_ERR(p);
 	}
 
 	pr_debug("powerdomain: will no longer prevent %s from sleeping if "
@@ -655,10 +653,10 @@ int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 {
 	struct powerdomain *p;
 
-	if (!pwrdm1)
+	if (!cpu_is_omap34xx())
 		return -EINVAL;
 
-	if (!cpu_is_omap34xx())
+	if (!pwrdm1)
 		return -EINVAL;
 
 	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
@@ -666,7 +664,7 @@ int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 		pr_debug("powerdomain: hardware cannot set/clear sleep "
 			 "dependency affecting %s from %s\n", pwrdm1->name,
 			 pwrdm2->name);
-		return IS_ERR(p);
+		return PTR_ERR(p);
 	}
 
 	return prm_read_mod_bits_shift(pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP,
@@ -985,6 +983,9 @@ int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
 	if (pwrdm->banks < (bank + 1))
 		return -EEXIST;
 
+	if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK)
+		bank = 1;
+
 	/*
 	 * The register bit names below may not correspond to the
 	 * actual names of the bits in each powerdomain's register,
@@ -1032,6 +1033,9 @@ int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
 	if (pwrdm->banks < (bank + 1))
 		return -EEXIST;
 
+	if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK)
+		bank = 1;
+
 	/*
 	 * The register bit names below may not correspond to the
 	 * actual names of the bits in each powerdomain's register,
diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h
index 691470ea4c6a..057b2e3e2c35 100644
--- a/arch/arm/mach-omap2/powerdomains.h
+++ b/arch/arm/mach-omap2/powerdomains.h
@@ -63,7 +63,7 @@
  * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
  */
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 #include "prcm-common.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains24xx.h
index 9f08dc3f7fd2..bd249a495aa9 100644
--- a/arch/arm/mach-omap2/powerdomains24xx.h
+++ b/arch/arm/mach-omap2/powerdomains24xx.h
@@ -20,7 +20,7 @@
  * the array in mach-omap2/powerdomains.h.
  */
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 #include "prcm-common.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index 4dcf94b800ab..588f7e07d0ea 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -20,7 +20,7 @@
  * the array in mach-omap2/powerdomains.h.
  */
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 #include "prcm-common.h"
 #include "prm.h"
@@ -190,6 +190,7 @@ static struct powerdomain mpu_34xx_pwrdm = {
 	.wkdep_srcs	  = mpu_34xx_wkdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.flags		  = PWRDM_HAS_MPU_QUIRK,
 	.banks		  = 1,
 	.pwrsts_mem_ret	  = {
 		[0] = PWRSTS_OFF_RET,
@@ -338,7 +339,13 @@ static struct powerdomain usbhost_pwrdm = {
 	.sleepdep_srcs	  = dss_per_usbhost_sleepdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
-	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */
+	/*
+	 * REVISIT: Enabling usb host save and restore mechanism seems to
+	 * leave the usb host domain permanently in ACTIVE mode after
+	 * changing the usb host power domain state from OFF to active once.
+	 * Disabling for now.
+	 */
+	/*.flags	  = PWRDM_HAS_HDWR_SAR,*/ /* for USBHOST ctrlr only */
 	.banks		  = 1,
 	.pwrsts_mem_ret	  = {
 		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index cb1ae84e0925..61ac2a418bd0 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -4,10 +4,12 @@
 /*
  * OMAP2/3 PRCM base and module definitions
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
+ * OMAP4 defines in this file are automatically generated from the OMAP hardware
+ * databases.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -49,6 +51,73 @@
 #define OMAP3430_NEON_MOD				0xb00
 #define OMAP3430ES2_USBHOST_MOD				0xc00
 
+#define BITS(n_bit)	\
+	(((1 << n_bit) - 1) | (1 << n_bit))
+
+#define BITFIELD(l_bit, u_bit)	\
+	(BITS(u_bit) & ~((BITS(l_bit)) >> 1))
+
+/* OMAP44XX specific module offsets */
+
+/* CM1 instances */
+
+#define OMAP4430_CM1_OCP_SOCKET_MOD	0x0000
+#define OMAP4430_CM1_CKGEN_MOD		0x0100
+#define OMAP4430_CM1_MPU_MOD		0x0300
+#define OMAP4430_CM1_TESLA_MOD		0x0400
+#define OMAP4430_CM1_ABE_MOD		0x0500
+#define OMAP4430_CM1_RESTORE_MOD	0x0e00
+#define OMAP4430_CM1_INSTR_MOD		0x0f00
+
+/* CM2 instances */
+
+#define OMAP4430_CM2_OCP_SOCKET_MOD	0x0000
+#define OMAP4430_CM2_CKGEN_MOD		0x0100
+#define OMAP4430_CM2_ALWAYS_ON_MOD	0x0600
+#define OMAP4430_CM2_CORE_MOD		0x0700
+#define OMAP4430_CM2_IVAHD_MOD		0x0f00
+#define OMAP4430_CM2_CAM_MOD		0x1000
+#define OMAP4430_CM2_DSS_MOD		0x1100
+#define OMAP4430_CM2_GFX_MOD		0x1200
+#define OMAP4430_CM2_L3INIT_MOD		0x1300
+#define OMAP4430_CM2_L4PER_MOD		0x1400
+#define OMAP4430_CM2_CEFUSE_MOD		0x1600
+#define OMAP4430_CM2_RESTORE_MOD	0x1e00
+#define OMAP4430_CM2_INSTR_MOD		0x1f00
+
+/* PRM instances */
+
+#define OMAP4430_PRM_OCP_SOCKET_MOD	0x0000
+#define OMAP4430_PRM_CKGEN_MOD		0x0100
+#define OMAP4430_PRM_MPU_MOD		0x0300
+#define OMAP4430_PRM_TESLA_MOD		0x0400
+#define OMAP4430_PRM_ABE_MOD		0x0500
+#define OMAP4430_PRM_ALWAYS_ON_MOD	0x0600
+#define OMAP4430_PRM_CORE_MOD		0x0700
+#define OMAP4430_PRM_IVAHD_MOD		0x0f00
+#define OMAP4430_PRM_CAM_MOD		0x1000
+#define OMAP4430_PRM_DSS_MOD		0x1100
+#define OMAP4430_PRM_GFX_MOD		0x1200
+#define OMAP4430_PRM_L3INIT_MOD		0x1300
+#define OMAP4430_PRM_L4PER_MOD		0x1400
+#define OMAP4430_PRM_CEFUSE_MOD		0x1600
+#define OMAP4430_PRM_WKUP_MOD		0x1700
+#define OMAP4430_PRM_WKUP_CM_MOD	0x1800
+#define OMAP4430_PRM_EMU_MOD		0x1900
+#define OMAP4430_PRM_EMU_CM_MOD		0x1a00
+#define OMAP4430_PRM_DEVICE_MOD		0x1b00
+#define OMAP4430_PRM_INSTR_MOD		0x1f00
+
+/* SCRM instances */
+
+#define OMAP4430_SCRM_SCRM_MOD	0x0000
+
+/* CHIRONSS instances */
+
+#define OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD	0x0000
+#define OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD	0x0200
+#define OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD		0x0400
+#define OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD		0x0800
 
 /* 24XX register bits shared between CM & PRM registers */
 
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index ced555a4cd1a..3ea8177ffb25 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -7,6 +7,9 @@
  *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
  * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,18 +22,105 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 
-#include <mach/common.h>
-#include <mach/prcm.h>
+#include <plat/common.h>
+#include <plat/prcm.h>
+#include <plat/irqs.h>
+#include <plat/control.h>
 
 #include "clock.h"
+#include "cm.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 
 static void __iomem *prm_base;
 static void __iomem *cm_base;
+static void __iomem *cm2_base;
 
 #define MAX_MODULE_ENABLE_WAIT		100000
 
+struct omap3_prcm_regs {
+	u32 control_padconf_sys_nirq;
+	u32 iva2_cm_clksel1;
+	u32 iva2_cm_clksel2;
+	u32 cm_sysconfig;
+	u32 sgx_cm_clksel;
+	u32 wkup_cm_clksel;
+	u32 dss_cm_clksel;
+	u32 cam_cm_clksel;
+	u32 per_cm_clksel;
+	u32 emu_cm_clksel;
+	u32 emu_cm_clkstctrl;
+	u32 pll_cm_autoidle2;
+	u32 pll_cm_clksel4;
+	u32 pll_cm_clksel5;
+	u32 pll_cm_clken;
+	u32 pll_cm_clken2;
+	u32 cm_polctrl;
+	u32 iva2_cm_fclken;
+	u32 iva2_cm_clken_pll;
+	u32 core_cm_fclken1;
+	u32 core_cm_fclken3;
+	u32 sgx_cm_fclken;
+	u32 wkup_cm_fclken;
+	u32 dss_cm_fclken;
+	u32 cam_cm_fclken;
+	u32 per_cm_fclken;
+	u32 usbhost_cm_fclken;
+	u32 core_cm_iclken1;
+	u32 core_cm_iclken2;
+	u32 core_cm_iclken3;
+	u32 sgx_cm_iclken;
+	u32 wkup_cm_iclken;
+	u32 dss_cm_iclken;
+	u32 cam_cm_iclken;
+	u32 per_cm_iclken;
+	u32 usbhost_cm_iclken;
+	u32 iva2_cm_autiidle2;
+	u32 mpu_cm_autoidle2;
+	u32 pll_cm_autoidle;
+	u32 iva2_cm_clkstctrl;
+	u32 mpu_cm_clkstctrl;
+	u32 core_cm_clkstctrl;
+	u32 sgx_cm_clkstctrl;
+	u32 dss_cm_clkstctrl;
+	u32 cam_cm_clkstctrl;
+	u32 per_cm_clkstctrl;
+	u32 neon_cm_clkstctrl;
+	u32 usbhost_cm_clkstctrl;
+	u32 core_cm_autoidle1;
+	u32 core_cm_autoidle2;
+	u32 core_cm_autoidle3;
+	u32 wkup_cm_autoidle;
+	u32 dss_cm_autoidle;
+	u32 cam_cm_autoidle;
+	u32 per_cm_autoidle;
+	u32 usbhost_cm_autoidle;
+	u32 sgx_cm_sleepdep;
+	u32 dss_cm_sleepdep;
+	u32 cam_cm_sleepdep;
+	u32 per_cm_sleepdep;
+	u32 usbhost_cm_sleepdep;
+	u32 cm_clkout_ctrl;
+	u32 prm_clkout_ctrl;
+	u32 sgx_pm_wkdep;
+	u32 dss_pm_wkdep;
+	u32 cam_pm_wkdep;
+	u32 per_pm_wkdep;
+	u32 neon_pm_wkdep;
+	u32 usbhost_pm_wkdep;
+	u32 core_pm_mpugrpsel1;
+	u32 iva2_pm_ivagrpsel1;
+	u32 core_pm_mpugrpsel3;
+	u32 core_pm_ivagrpsel3;
+	u32 wkup_pm_mpugrpsel;
+	u32 wkup_pm_ivagrpsel;
+	u32 per_pm_mpugrpsel;
+	u32 per_pm_ivagrpsel;
+	u32 wkup_pm_wken;
+};
+
+struct omap3_prcm_regs prcm_context;
+
 u32 omap_prcm_get_reset_sources(void)
 {
 	/* XXX This presumably needs modification for 34XX */
@@ -46,9 +136,18 @@ void omap_prcm_arch_reset(char mode)
 
 	if (cpu_is_omap24xx())
 		prcm_offs = WKUP_MOD;
-	else if (cpu_is_omap34xx())
+	else if (cpu_is_omap34xx()) {
+		u32 l;
+
 		prcm_offs = OMAP3430_GR_MOD;
-	else
+		l = ('B' << 24) | ('M' << 16) | mode;
+		/* Reserve the first word in scratchpad for communicating
+		 * with the boot ROM. A pointer to a data structure
+		 * describing the boot process can be stored there,
+		 * cf. OMAP34xx TRM, Initialization / Software Booting
+		 * Configuration. */
+		omap_writel(l, OMAP343X_SCRATCHPAD + 4);
+	} else
 		WARN_ON(1);
 
 	prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, RM_RSTCTRL);
@@ -72,14 +171,12 @@ u32 prm_read_mod_reg(s16 module, u16 idx)
 {
 	return __omap_prcm_read(prm_base, module, idx);
 }
-EXPORT_SYMBOL(prm_read_mod_reg);
 
 /* Write into a register in a PRM module */
 void prm_write_mod_reg(u32 val, s16 module, u16 idx)
 {
 	__omap_prcm_write(val, prm_base, module, idx);
 }
-EXPORT_SYMBOL(prm_write_mod_reg);
 
 /* Read-modify-write a register in a PRM module. Caller must lock */
 u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
@@ -93,21 +190,18 @@ u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
 
 	return v;
 }
-EXPORT_SYMBOL(prm_rmw_mod_reg_bits);
 
 /* Read a register in a CM module */
 u32 cm_read_mod_reg(s16 module, u16 idx)
 {
 	return __omap_prcm_read(cm_base, module, idx);
 }
-EXPORT_SYMBOL(cm_read_mod_reg);
 
 /* Write into a register in a CM module */
 void cm_write_mod_reg(u32 val, s16 module, u16 idx)
 {
 	__omap_prcm_write(val, cm_base, module, idx);
 }
-EXPORT_SYMBOL(cm_write_mod_reg);
 
 /* Read-modify-write a register in a CM module. Caller must lock */
 u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
@@ -121,7 +215,6 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
 
 	return v;
 }
-EXPORT_SYMBOL(cm_rmw_mod_reg_bits);
 
 /**
  * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
@@ -149,9 +242,8 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name)
 		BUG();
 
 	/* Wait for lock */
-	while (((__raw_readl(reg) & mask) != ena) &&
-	       (i++ < MAX_MODULE_ENABLE_WAIT))
-		udelay(1);
+	omap_test_timeout(((__raw_readl(reg) & mask) == ena),
+			  MAX_MODULE_ENABLE_WAIT, i);
 
 	if (i < MAX_MODULE_ENABLE_WAIT)
 		pr_debug("cm: Module associated with clock %s ready after %d "
@@ -167,4 +259,310 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 {
 	prm_base = omap2_globals->prm;
 	cm_base = omap2_globals->cm;
+	cm2_base = omap2_globals->cm2;
+}
+
+#ifdef CONFIG_ARCH_OMAP3
+void omap3_prcm_save_context(void)
+{
+	prcm_context.control_padconf_sys_nirq =
+			 omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
+	prcm_context.iva2_cm_clksel1 =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1);
+	prcm_context.iva2_cm_clksel2 =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2);
+	prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
+	prcm_context.sgx_cm_clksel =
+			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
+	prcm_context.wkup_cm_clksel = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
+	prcm_context.dss_cm_clksel =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
+	prcm_context.cam_cm_clksel =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSEL);
+	prcm_context.per_cm_clksel =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSEL);
+	prcm_context.emu_cm_clksel =
+			 cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
+	prcm_context.emu_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSTCTRL);
+	prcm_context.pll_cm_autoidle2 =
+			 cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
+	prcm_context.pll_cm_clksel4 =
+			cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
+	prcm_context.pll_cm_clksel5 =
+			 cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
+	prcm_context.pll_cm_clken =
+			cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	prcm_context.pll_cm_clken2 =
+			cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
+	prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
+	prcm_context.iva2_cm_fclken =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN);
+	prcm_context.iva2_cm_clken_pll = cm_read_mod_reg(OMAP3430_IVA2_MOD,
+			OMAP3430_CM_CLKEN_PLL);
+	prcm_context.core_cm_fclken1 =
+			 cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	prcm_context.core_cm_fclken3 =
+			 cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+	prcm_context.sgx_cm_fclken =
+			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_FCLKEN);
+	prcm_context.wkup_cm_fclken =
+			 cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+	prcm_context.dss_cm_fclken =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_FCLKEN);
+	prcm_context.cam_cm_fclken =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_FCLKEN);
+	prcm_context.per_cm_fclken =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+	prcm_context.usbhost_cm_fclken =
+			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
+	prcm_context.core_cm_iclken1 =
+			 cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+	prcm_context.core_cm_iclken2 =
+			 cm_read_mod_reg(CORE_MOD, CM_ICLKEN2);
+	prcm_context.core_cm_iclken3 =
+			 cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+	prcm_context.sgx_cm_iclken =
+			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_ICLKEN);
+	prcm_context.wkup_cm_iclken =
+			 cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+	prcm_context.dss_cm_iclken =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_ICLKEN);
+	prcm_context.cam_cm_iclken =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_ICLKEN);
+	prcm_context.per_cm_iclken =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+	prcm_context.usbhost_cm_iclken =
+			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
+	prcm_context.iva2_cm_autiidle2 =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+	prcm_context.mpu_cm_autoidle2 =
+			 cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
+	prcm_context.pll_cm_autoidle =
+			 cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+	prcm_context.iva2_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
+	prcm_context.mpu_cm_clkstctrl =
+			 cm_read_mod_reg(MPU_MOD, CM_CLKSTCTRL);
+	prcm_context.core_cm_clkstctrl =
+			 cm_read_mod_reg(CORE_MOD, CM_CLKSTCTRL);
+	prcm_context.sgx_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSTCTRL);
+	prcm_context.dss_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSTCTRL);
+	prcm_context.cam_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSTCTRL);
+	prcm_context.per_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSTCTRL);
+	prcm_context.neon_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_NEON_MOD, CM_CLKSTCTRL);
+	prcm_context.usbhost_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL);
+	prcm_context.core_cm_autoidle1 =
+			 cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE1);
+	prcm_context.core_cm_autoidle2 =
+			 cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE2);
+	prcm_context.core_cm_autoidle3 =
+			 cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE3);
+	prcm_context.wkup_cm_autoidle =
+			 cm_read_mod_reg(WKUP_MOD, CM_AUTOIDLE);
+	prcm_context.dss_cm_autoidle =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_AUTOIDLE);
+	prcm_context.cam_cm_autoidle =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_AUTOIDLE);
+	prcm_context.per_cm_autoidle =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+	prcm_context.usbhost_cm_autoidle =
+			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
+	prcm_context.sgx_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.dss_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.cam_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.per_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.usbhost_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.cm_clkout_ctrl = cm_read_mod_reg(OMAP3430_CCR_MOD,
+		 OMAP3_CM_CLKOUT_CTRL_OFFSET);
+	prcm_context.prm_clkout_ctrl = prm_read_mod_reg(OMAP3430_CCR_MOD,
+		OMAP3_PRM_CLKOUT_CTRL_OFFSET);
+	prcm_context.sgx_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430ES2_SGX_MOD, PM_WKDEP);
+	prcm_context.dss_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430_DSS_MOD, PM_WKDEP);
+	prcm_context.cam_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430_CAM_MOD, PM_WKDEP);
+	prcm_context.per_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKDEP);
+	prcm_context.neon_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430_NEON_MOD, PM_WKDEP);
+	prcm_context.usbhost_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+	prcm_context.core_pm_mpugrpsel1 =
+		 prm_read_mod_reg(CORE_MOD, OMAP3430_PM_MPUGRPSEL1);
+	prcm_context.iva2_pm_ivagrpsel1 =
+		 prm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_PM_IVAGRPSEL1);
+	prcm_context.core_pm_mpugrpsel3 =
+		 prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_MPUGRPSEL3);
+	prcm_context.core_pm_ivagrpsel3 =
+		 prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	prcm_context.wkup_pm_mpugrpsel =
+		 prm_read_mod_reg(WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+	prcm_context.wkup_pm_ivagrpsel =
+		 prm_read_mod_reg(WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	prcm_context.per_pm_mpugrpsel =
+		 prm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+	prcm_context.per_pm_ivagrpsel =
+		 prm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+	prcm_context.wkup_pm_wken = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+	return;
+}
+
+void omap3_prcm_restore_context(void)
+{
+	omap_ctrl_writel(prcm_context.control_padconf_sys_nirq,
+					 OMAP343X_CONTROL_PADCONF_SYSNIRQ);
+	cm_write_mod_reg(prcm_context.iva2_cm_clksel1, OMAP3430_IVA2_MOD,
+					 CM_CLKSEL1);
+	cm_write_mod_reg(prcm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD,
+					 CM_CLKSEL2);
+	__raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
+	cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
+					 CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.wkup_cm_clksel, WKUP_MOD, CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
+					 CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
+					 CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.per_cm_clksel, OMAP3430_PER_MOD,
+					 CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.emu_cm_clksel, OMAP3430_EMU_MOD,
+					 CM_CLKSEL1);
+	cm_write_mod_reg(prcm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
+					 CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.pll_cm_autoidle2, PLL_MOD,
+					 CM_AUTOIDLE2);
+	cm_write_mod_reg(prcm_context.pll_cm_clksel4, PLL_MOD,
+					OMAP3430ES2_CM_CLKSEL4);
+	cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD,
+					 OMAP3430ES2_CM_CLKSEL5);
+	cm_write_mod_reg(prcm_context.pll_cm_clken, PLL_MOD, CM_CLKEN);
+	cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD,
+					OMAP3430ES2_CM_CLKEN2);
+	__raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
+	cm_write_mod_reg(prcm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD,
+					OMAP3430_CM_CLKEN_PLL);
+	cm_write_mod_reg(prcm_context.core_cm_fclken1, CORE_MOD, CM_FCLKEN1);
+	cm_write_mod_reg(prcm_context.core_cm_fclken3, CORE_MOD,
+					 OMAP3430ES2_CM_FCLKEN3);
+	cm_write_mod_reg(prcm_context.sgx_cm_fclken, OMAP3430ES2_SGX_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.wkup_cm_fclken, WKUP_MOD, CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.dss_cm_fclken, OMAP3430_DSS_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.cam_cm_fclken, OMAP3430_CAM_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.per_cm_fclken, OMAP3430_PER_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.usbhost_cm_fclken,
+					 OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.core_cm_iclken1, CORE_MOD, CM_ICLKEN1);
+	cm_write_mod_reg(prcm_context.core_cm_iclken2, CORE_MOD, CM_ICLKEN2);
+	cm_write_mod_reg(prcm_context.core_cm_iclken3, CORE_MOD, CM_ICLKEN3);
+	cm_write_mod_reg(prcm_context.sgx_cm_iclken, OMAP3430ES2_SGX_MOD,
+					CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.wkup_cm_iclken, WKUP_MOD, CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.dss_cm_iclken, OMAP3430_DSS_MOD,
+					CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.cam_cm_iclken, OMAP3430_CAM_MOD,
+					CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.per_cm_iclken, OMAP3430_PER_MOD,
+					CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.usbhost_cm_iclken,
+					OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD,
+					CM_AUTOIDLE2);
+	cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
+	cm_write_mod_reg(prcm_context.pll_cm_autoidle, PLL_MOD, CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.core_cm_clkstctrl, CORE_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.sgx_cm_clkstctrl, OMAP3430ES2_SGX_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.dss_cm_clkstctrl, OMAP3430_DSS_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.cam_cm_clkstctrl, OMAP3430_CAM_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.per_cm_clkstctrl, OMAP3430_PER_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.neon_cm_clkstctrl, OMAP3430_NEON_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.usbhost_cm_clkstctrl,
+					OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.core_cm_autoidle1, CORE_MOD,
+					CM_AUTOIDLE1);
+	cm_write_mod_reg(prcm_context.core_cm_autoidle2, CORE_MOD,
+					CM_AUTOIDLE2);
+	cm_write_mod_reg(prcm_context.core_cm_autoidle3, CORE_MOD,
+					CM_AUTOIDLE3);
+	cm_write_mod_reg(prcm_context.wkup_cm_autoidle, WKUP_MOD, CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.dss_cm_autoidle, OMAP3430_DSS_MOD,
+					CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.cam_cm_autoidle, OMAP3430_CAM_MOD,
+					CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.per_cm_autoidle, OMAP3430_PER_MOD,
+					CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.usbhost_cm_autoidle,
+					OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.sgx_cm_sleepdep, OMAP3430ES2_SGX_MOD,
+					OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.dss_cm_sleepdep, OMAP3430_DSS_MOD,
+					OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.cam_cm_sleepdep, OMAP3430_CAM_MOD,
+					OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.per_cm_sleepdep, OMAP3430_PER_MOD,
+					OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.usbhost_cm_sleepdep,
+				OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD,
+					OMAP3_CM_CLKOUT_CTRL_OFFSET);
+	prm_write_mod_reg(prcm_context.prm_clkout_ctrl, OMAP3430_CCR_MOD,
+					OMAP3_PRM_CLKOUT_CTRL_OFFSET);
+	prm_write_mod_reg(prcm_context.sgx_pm_wkdep, OMAP3430ES2_SGX_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.dss_pm_wkdep, OMAP3430_DSS_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.cam_pm_wkdep, OMAP3430_CAM_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.per_pm_wkdep, OMAP3430_PER_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.neon_pm_wkdep, OMAP3430_NEON_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.usbhost_pm_wkdep,
+					OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+	prm_write_mod_reg(prcm_context.core_pm_mpugrpsel1, CORE_MOD,
+					OMAP3430_PM_MPUGRPSEL1);
+	prm_write_mod_reg(prcm_context.iva2_pm_ivagrpsel1, OMAP3430_IVA2_MOD,
+					OMAP3430_PM_IVAGRPSEL1);
+	prm_write_mod_reg(prcm_context.core_pm_mpugrpsel3, CORE_MOD,
+					OMAP3430ES2_PM_MPUGRPSEL3);
+	prm_write_mod_reg(prcm_context.core_pm_ivagrpsel3, CORE_MOD,
+					OMAP3430ES2_PM_IVAGRPSEL3);
+	prm_write_mod_reg(prcm_context.wkup_pm_mpugrpsel, WKUP_MOD,
+					OMAP3430_PM_MPUGRPSEL);
+	prm_write_mod_reg(prcm_context.wkup_pm_ivagrpsel, WKUP_MOD,
+					OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(prcm_context.per_pm_mpugrpsel, OMAP3430_PER_MOD,
+					OMAP3430_PM_MPUGRPSEL);
+	prm_write_mod_reg(prcm_context.per_pm_ivagrpsel, OMAP3430_PER_MOD,
+					 OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(prcm_context.wkup_pm_wken, WKUP_MOD, PM_WKEN);
+	return;
 }
+#endif
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 9fd03a2ec95c..8f21bae6dc1c 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -365,6 +365,7 @@
 /* PM_PREPWSTST_GFX specific bits */
 
 /* PM_WKEN_WKUP specific bits */
+#define OMAP3430_EN_IO_CHAIN				(1 << 16)
 #define OMAP3430_EN_IO					(1 << 8)
 #define OMAP3430_EN_GPIO1				(1 << 3)
 
@@ -373,6 +374,7 @@
 /* PM_IVA2GRPSEL_WKUP specific bits */
 
 /* PM_WKST_WKUP specific bits */
+#define OMAP3430_ST_IO_CHAIN				(1 << 16)
 #define OMAP3430_ST_IO					(1 << 8)
 
 /* PRM_CLKSEL */
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
new file mode 100644
index 000000000000..301c810fb269
--- /dev/null
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -0,0 +1,2205 @@
+/*
+ * OMAP44xx Power Management register bits
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
+
+#include "prm.h"
+
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT				(1 << 1)
+#define OMAP4430_ABBOFF_ACT_EXPORT_MASK					BITFIELD(1, 1)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT				(1 << 2)
+#define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK				BITFIELD(2, 2)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_ABB_IVA_DONE_EN_SHIFT					(1 << 31)
+#define OMAP4430_ABB_IVA_DONE_EN_MASK					BITFIELD(31, 31)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_ABB_IVA_DONE_ST_SHIFT					(1 << 31)
+#define OMAP4430_ABB_IVA_DONE_ST_MASK					BITFIELD(31, 31)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_ABB_MPU_DONE_EN_SHIFT					(1 << 7)
+#define OMAP4430_ABB_MPU_DONE_EN_MASK					BITFIELD(7, 7)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_ABB_MPU_DONE_ST_SHIFT					(1 << 7)
+#define OMAP4430_ABB_MPU_DONE_ST_MASK					BITFIELD(7, 7)
+
+/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
+#define OMAP4430_ACTIVE_FBB_SEL_SHIFT					(1 << 2)
+#define OMAP4430_ACTIVE_FBB_SEL_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
+#define OMAP4430_ACTIVE_RBB_SEL_SHIFT					(1 << 1)
+#define OMAP4430_ACTIVE_RBB_SEL_MASK					BITFIELD(1, 1)
+
+/* Used by PM_ABE_PWRSTCTRL */
+#define OMAP4430_AESSMEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_AESSMEM_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_ABE_PWRSTCTRL */
+#define OMAP4430_AESSMEM_RETSTATE_SHIFT					(1 << 8)
+#define OMAP4430_AESSMEM_RETSTATE_MASK					BITFIELD(8, 8)
+
+/* Used by PM_ABE_PWRSTST */
+#define OMAP4430_AESSMEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_AESSMEM_STATEST_MASK					BITFIELD(4, 5)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_AIPOFF_SHIFT						(1 << 8)
+#define OMAP4430_AIPOFF_MASK						BITFIELD(8, 8)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT				(1 << 0)
+#define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK				BITFIELD(0, 1)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT				(1 << 4)
+#define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK				BITFIELD(4, 5)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT				(1 << 2)
+#define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK				BITFIELD(2, 3)
+
+/* Used by PM_CAM_PWRSTCTRL */
+#define OMAP4430_CAM_MEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_CAM_MEM_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_CAM_PWRSTST */
+#define OMAP4430_CAM_MEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_CAM_MEM_STATEST_MASK					BITFIELD(4, 5)
+
+/* Used by PRM_CLKREQCTRL */
+#define OMAP4430_CLKREQ_COND_SHIFT					(1 << 0)
+#define OMAP4430_CLKREQ_COND_MASK					BITFIELD(0, 2)
+
+/* Used by PRM_VC_VAL_SMPS_RA_CMD */
+#define OMAP4430_CMDRA_VDD_CORE_L_SHIFT					(1 << 0)
+#define OMAP4430_CMDRA_VDD_CORE_L_MASK					BITFIELD(0, 7)
+
+/* Used by PRM_VC_VAL_SMPS_RA_CMD */
+#define OMAP4430_CMDRA_VDD_IVA_L_SHIFT					(1 << 8)
+#define OMAP4430_CMDRA_VDD_IVA_L_MASK					BITFIELD(8, 15)
+
+/* Used by PRM_VC_VAL_SMPS_RA_CMD */
+#define OMAP4430_CMDRA_VDD_MPU_L_SHIFT					(1 << 16)
+#define OMAP4430_CMDRA_VDD_MPU_L_MASK					BITFIELD(16, 23)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_CMD_VDD_CORE_L_SHIFT					(1 << 4)
+#define OMAP4430_CMD_VDD_CORE_L_MASK					BITFIELD(4, 4)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_CMD_VDD_IVA_L_SHIFT					(1 << 12)
+#define OMAP4430_CMD_VDD_IVA_L_MASK					BITFIELD(12, 12)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_CMD_VDD_MPU_L_SHIFT					(1 << 17)
+#define OMAP4430_CMD_VDD_MPU_L_MASK					BITFIELD(17, 17)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT				(1 << 18)
+#define OMAP4430_CORE_OCMRAM_ONSTATE_MASK				BITFIELD(18, 19)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT				(1 << 9)
+#define OMAP4430_CORE_OCMRAM_RETSTATE_MASK				BITFIELD(9, 9)
+
+/* Used by PM_CORE_PWRSTST */
+#define OMAP4430_CORE_OCMRAM_STATEST_SHIFT				(1 << 6)
+#define OMAP4430_CORE_OCMRAM_STATEST_MASK				BITFIELD(6, 7)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT				(1 << 16)
+#define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK				BITFIELD(16, 17)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT				(1 << 8)
+#define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK				BITFIELD(8, 8)
+
+/* Used by PM_CORE_PWRSTST */
+#define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT				(1 << 4)
+#define OMAP4430_CORE_OTHER_BANK_STATEST_MASK				BITFIELD(4, 5)
+
+/* Used by PRM_VC_VAL_BYPASS */
+#define OMAP4430_DATA_SHIFT						(1 << 16)
+#define OMAP4430_DATA_MASK						BITFIELD(16, 23)
+
+/* Used by PRM_DEVICE_OFF_CTRL */
+#define OMAP4430_DEVICE_OFF_ENABLE_SHIFT				(1 << 0)
+#define OMAP4430_DEVICE_OFF_ENABLE_MASK					BITFIELD(0, 0)
+
+/* Used by PRM_VC_CFG_I2C_MODE */
+#define OMAP4430_DFILTEREN_SHIFT					(1 << 6)
+#define OMAP4430_DFILTEREN_MASK						BITFIELD(6, 6)
+
+/* Used by PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
+#define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT				(1 << 4)
+#define OMAP4430_DPLL_ABE_RECAL_EN_MASK					BITFIELD(4, 4)
+
+/* Used by PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
+#define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT				(1 << 4)
+#define OMAP4430_DPLL_ABE_RECAL_ST_MASK					BITFIELD(4, 4)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT				(1 << 0)
+#define OMAP4430_DPLL_CORE_RECAL_EN_MASK				BITFIELD(0, 0)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT				(1 << 0)
+#define OMAP4430_DPLL_CORE_RECAL_ST_MASK				BITFIELD(0, 0)
+
+/* Used by PRM_IRQENABLE_MPU */
+#define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT				(1 << 6)
+#define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK				BITFIELD(6, 6)
+
+/* Used by PRM_IRQSTATUS_MPU */
+#define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT				(1 << 6)
+#define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK				BITFIELD(6, 6)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
+#define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT				(1 << 2)
+#define OMAP4430_DPLL_IVA_RECAL_EN_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
+#define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT				(1 << 2)
+#define OMAP4430_DPLL_IVA_RECAL_ST_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_IRQENABLE_MPU */
+#define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT				(1 << 1)
+#define OMAP4430_DPLL_MPU_RECAL_EN_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_IRQSTATUS_MPU */
+#define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT				(1 << 1)
+#define OMAP4430_DPLL_MPU_RECAL_ST_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_DPLL_PER_RECAL_EN_SHIFT				(1 << 3)
+#define OMAP4430_DPLL_PER_RECAL_EN_MASK					BITFIELD(3, 3)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_DPLL_PER_RECAL_ST_SHIFT				(1 << 3)
+#define OMAP4430_DPLL_PER_RECAL_ST_MASK					BITFIELD(3, 3)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT				(1 << 7)
+#define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK				BITFIELD(7, 7)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT				(1 << 7)
+#define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK				BITFIELD(7, 7)
+
+/* Used by PRM_IRQENABLE_MPU */
+#define OMAP4430_DPLL_USB_RECAL_EN_SHIFT				(1 << 5)
+#define OMAP4430_DPLL_USB_RECAL_EN_MASK					BITFIELD(5, 5)
+
+/* Used by PRM_IRQSTATUS_MPU */
+#define OMAP4430_DPLL_USB_RECAL_ST_SHIFT				(1 << 5)
+#define OMAP4430_DPLL_USB_RECAL_ST_MASK					BITFIELD(5, 5)
+
+/* Used by PM_DSS_PWRSTCTRL */
+#define OMAP4430_DSS_MEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_DSS_MEM_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_DSS_PWRSTCTRL */
+#define OMAP4430_DSS_MEM_RETSTATE_SHIFT					(1 << 8)
+#define OMAP4430_DSS_MEM_RETSTATE_MASK					BITFIELD(8, 8)
+
+/* Used by PM_DSS_PWRSTST */
+#define OMAP4430_DSS_MEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_DSS_MEM_STATEST_MASK					BITFIELD(4, 5)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT				(1 << 20)
+#define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK				BITFIELD(20, 21)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT				(1 << 10)
+#define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK				BITFIELD(10, 10)
+
+/* Used by PM_CORE_PWRSTST */
+#define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT				(1 << 8)
+#define OMAP4430_DUCATI_L2RAM_STATEST_MASK				BITFIELD(8, 9)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT				(1 << 22)
+#define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK				BITFIELD(22, 23)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT				(1 << 11)
+#define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK				BITFIELD(11, 11)
+
+/* Used by PM_CORE_PWRSTST */
+#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT				(1 << 10)
+#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK				BITFIELD(10, 11)
+
+/* Used by RM_MPU_RSTST */
+#define OMAP4430_EMULATION_RST_SHIFT					(1 << 0)
+#define OMAP4430_EMULATION_RST_MASK					BITFIELD(0, 0)
+
+/* Used by RM_DUCATI_RSTST */
+#define OMAP4430_EMULATION_RST1ST_SHIFT					(1 << 3)
+#define OMAP4430_EMULATION_RST1ST_MASK					BITFIELD(3, 3)
+
+/* Used by RM_DUCATI_RSTST */
+#define OMAP4430_EMULATION_RST2ST_SHIFT					(1 << 4)
+#define OMAP4430_EMULATION_RST2ST_MASK					BITFIELD(4, 4)
+
+/* Used by RM_IVAHD_RSTST */
+#define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT				(1 << 3)
+#define OMAP4430_EMULATION_SEQ1_RST1ST_MASK				BITFIELD(3, 3)
+
+/* Used by RM_IVAHD_RSTST */
+#define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT				(1 << 4)
+#define OMAP4430_EMULATION_SEQ2_RST2ST_MASK				BITFIELD(4, 4)
+
+/* Used by PM_EMU_PWRSTCTRL */
+#define OMAP4430_EMU_BANK_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_EMU_BANK_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_EMU_PWRSTST */
+#define OMAP4430_EMU_BANK_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_EMU_BANK_STATEST_MASK					BITFIELD(4, 5)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP
+ */
+#define OMAP4430_ENABLE_RTA_EXPORT_SHIFT				(1 << 0)
+#define OMAP4430_ENABLE_RTA_EXPORT_MASK					BITFIELD(0, 0)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_ENFUNC1_SHIFT						(1 << 3)
+#define OMAP4430_ENFUNC1_MASK						BITFIELD(3, 3)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_ENFUNC3_SHIFT						(1 << 5)
+#define OMAP4430_ENFUNC3_MASK						BITFIELD(5, 5)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_ENFUNC4_SHIFT						(1 << 6)
+#define OMAP4430_ENFUNC4_MASK						BITFIELD(6, 6)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_ENFUNC5_SHIFT						(1 << 7)
+#define OMAP4430_ENFUNC5_MASK						BITFIELD(7, 7)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_ERRORGAIN_SHIFT					(1 << 16)
+#define OMAP4430_ERRORGAIN_MASK						BITFIELD(16, 23)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_ERROROFFSET_SHIFT					(1 << 24)
+#define OMAP4430_ERROROFFSET_MASK					BITFIELD(24, 31)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_EXTERNAL_WARM_RST_SHIFT				(1 << 5)
+#define OMAP4430_EXTERNAL_WARM_RST_MASK					BITFIELD(5, 5)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_FORCEUPDATE_SHIFT					(1 << 1)
+#define OMAP4430_FORCEUPDATE_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
+#define OMAP4430_FORCEUPDATEWAIT_SHIFT					(1 << 8)
+#define OMAP4430_FORCEUPDATEWAIT_MASK					BITFIELD(8, 31)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_TESLA */
+#define OMAP4430_FORCEWKUP_EN_SHIFT					(1 << 10)
+#define OMAP4430_FORCEWKUP_EN_MASK					BITFIELD(10, 10)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_TESLA */
+#define OMAP4430_FORCEWKUP_ST_SHIFT					(1 << 10)
+#define OMAP4430_FORCEWKUP_ST_MASK					BITFIELD(10, 10)
+
+/* Used by PM_GFX_PWRSTCTRL */
+#define OMAP4430_GFX_MEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_GFX_MEM_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_GFX_PWRSTST */
+#define OMAP4430_GFX_MEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_GFX_MEM_STATEST_MASK					BITFIELD(4, 5)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_GLOBAL_COLD_RST_SHIFT					(1 << 0)
+#define OMAP4430_GLOBAL_COLD_RST_MASK					BITFIELD(0, 0)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT				(1 << 1)
+#define OMAP4430_GLOBAL_WARM_SW_RST_MASK				BITFIELD(1, 1)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_GLOBAL_WUEN_SHIFT					(1 << 16)
+#define OMAP4430_GLOBAL_WUEN_MASK					BITFIELD(16, 16)
+
+/* Used by PRM_VC_CFG_I2C_MODE */
+#define OMAP4430_HSMCODE_SHIFT						(1 << 0)
+#define OMAP4430_HSMCODE_MASK						BITFIELD(0, 2)
+
+/* Used by PRM_VC_CFG_I2C_MODE */
+#define OMAP4430_HSMODEEN_SHIFT						(1 << 3)
+#define OMAP4430_HSMODEEN_MASK						BITFIELD(3, 3)
+
+/* Used by PRM_VC_CFG_I2C_CLK */
+#define OMAP4430_HSSCLH_SHIFT						(1 << 16)
+#define OMAP4430_HSSCLH_MASK						BITFIELD(16, 23)
+
+/* Used by PRM_VC_CFG_I2C_CLK */
+#define OMAP4430_HSSCLL_SHIFT						(1 << 24)
+#define OMAP4430_HSSCLL_MASK						BITFIELD(24, 31)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_HWA_MEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_HWA_MEM_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_HWA_MEM_RETSTATE_SHIFT					(1 << 8)
+#define OMAP4430_HWA_MEM_RETSTATE_MASK					BITFIELD(8, 8)
+
+/* Used by PM_IVAHD_PWRSTST */
+#define OMAP4430_HWA_MEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_HWA_MEM_STATEST_MASK					BITFIELD(4, 5)
+
+/* Used by RM_MPU_RSTST */
+#define OMAP4430_ICECRUSHER_MPU_RST_SHIFT				(1 << 1)
+#define OMAP4430_ICECRUSHER_MPU_RST_MASK				BITFIELD(1, 1)
+
+/* Used by RM_DUCATI_RSTST */
+#define OMAP4430_ICECRUSHER_RST1ST_SHIFT				(1 << 5)
+#define OMAP4430_ICECRUSHER_RST1ST_MASK					BITFIELD(5, 5)
+
+/* Used by RM_DUCATI_RSTST */
+#define OMAP4430_ICECRUSHER_RST2ST_SHIFT				(1 << 6)
+#define OMAP4430_ICECRUSHER_RST2ST_MASK					BITFIELD(6, 6)
+
+/* Used by RM_IVAHD_RSTST */
+#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT				(1 << 5)
+#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK				BITFIELD(5, 5)
+
+/* Used by RM_IVAHD_RSTST */
+#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT				(1 << 6)
+#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK				BITFIELD(6, 6)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_ICEPICK_RST_SHIFT					(1 << 9)
+#define OMAP4430_ICEPICK_RST_MASK					BITFIELD(9, 9)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_INITVDD_SHIFT						(1 << 2)
+#define OMAP4430_INITVDD_MASK						BITFIELD(2, 2)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_INITVOLTAGE_SHIFT					(1 << 8)
+#define OMAP4430_INITVOLTAGE_MASK					BITFIELD(8, 15)
+
+/*
+ * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST,
+ * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
+ * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
+ */
+#define OMAP4430_INTRANSITION_SHIFT					(1 << 20)
+#define OMAP4430_INTRANSITION_MASK					BITFIELD(20, 20)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_IO_EN_SHIFT						(1 << 9)
+#define OMAP4430_IO_EN_MASK						BITFIELD(9, 9)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_IO_ON_STATUS_SHIFT					(1 << 5)
+#define OMAP4430_IO_ON_STATUS_MASK					BITFIELD(5, 5)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_IO_ST_SHIFT						(1 << 9)
+#define OMAP4430_IO_ST_MASK						BITFIELD(9, 9)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_ISOCLK_OVERRIDE_SHIFT					(1 << 0)
+#define OMAP4430_ISOCLK_OVERRIDE_MASK					BITFIELD(0, 0)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_ISOCLK_STATUS_SHIFT					(1 << 1)
+#define OMAP4430_ISOCLK_STATUS_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_ISOOVR_EXTEND_SHIFT					(1 << 4)
+#define OMAP4430_ISOOVR_EXTEND_MASK					BITFIELD(4, 4)
+
+/* Used by PRM_IO_COUNT */
+#define OMAP4430_ISO_2_ON_TIME_SHIFT					(1 << 0)
+#define OMAP4430_ISO_2_ON_TIME_MASK					BITFIELD(0, 7)
+
+/* Used by PM_L3INIT_PWRSTCTRL */
+#define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT				(1 << 16)
+#define OMAP4430_L3INIT_BANK1_ONSTATE_MASK				BITFIELD(16, 17)
+
+/* Used by PM_L3INIT_PWRSTCTRL */
+#define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT				(1 << 8)
+#define OMAP4430_L3INIT_BANK1_RETSTATE_MASK				BITFIELD(8, 8)
+
+/* Used by PM_L3INIT_PWRSTST */
+#define OMAP4430_L3INIT_BANK1_STATEST_SHIFT				(1 << 4)
+#define OMAP4430_L3INIT_BANK1_STATEST_MASK				BITFIELD(4, 5)
+
+/*
+ * Used by PM_CORE_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL,
+ * PM_MPU_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL,
+ * PM_IVAHD_PWRSTCTRL
+ */
+#define OMAP4430_LOGICRETSTATE_SHIFT					(1 << 2)
+#define OMAP4430_LOGICRETSTATE_MASK					BITFIELD(2, 2)
+
+/*
+ * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST,
+ * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
+ * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
+ */
+#define OMAP4430_LOGICSTATEST_SHIFT					(1 << 2)
+#define OMAP4430_LOGICSTATEST_MASK					BITFIELD(2, 2)
+
+/*
+ * Used by RM_WKUP_GPIO1_CONTEXT, RM_WKUP_KEYBOARD_CONTEXT,
+ * RM_WKUP_L4WKUP_CONTEXT, RM_WKUP_RTC_CONTEXT, RM_WKUP_SARRAM_CONTEXT,
+ * RM_WKUP_SYNCTIMER_CONTEXT, RM_WKUP_TIMER12_CONTEXT, RM_WKUP_TIMER1_CONTEXT,
+ * RM_WKUP_USIM_CONTEXT, RM_WKUP_WDT1_CONTEXT, RM_WKUP_WDT2_CONTEXT,
+ * RM_EMU_DEBUGSS_CONTEXT, RM_D2D_SAD2D_CONTEXT, RM_D2D_SAD2D_FW_CONTEXT,
+ * RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT,
+ * RM_L3INSTR_L3_INSTR_CONTEXT, RM_L3INSTR_OCP_WP1_CONTEXT,
+ * RM_L3_1_L3_1_CONTEXT, RM_L3_2_L3_2_CONTEXT, RM_L3_2_OCMC_RAM_CONTEXT,
+ * RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_SAR_ROM_CONTEXT, RM_MEMIF_DLL_CONTEXT,
+ * RM_MEMIF_DLL_H_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT,
+ * RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT, RM_L3INIT_CCPTX_CONTEXT,
+ * RM_L3INIT_EMAC_CONTEXT, RM_L3INIT_P1500_CONTEXT, RM_L3INIT_PCIESS_CONTEXT,
+ * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
+ * RM_L3INIT_USBPHYOCP2SCP_CONTEXT, RM_L3INIT_XHPI_CONTEXT,
+ * RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT,
+ * RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, RM_ABE_MCBSP3_CONTEXT,
+ * RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT, RM_ABE_TIMER5_CONTEXT,
+ * RM_ABE_TIMER6_CONTEXT, RM_ABE_TIMER7_CONTEXT, RM_ABE_TIMER8_CONTEXT,
+ * RM_ABE_WDT3_CONTEXT, RM_GFX_GFX_CONTEXT, RM_MPU_MPU_CONTEXT,
+ * RM_CEFUSE_CEFUSE_CONTEXT, RM_ALWON_MDMINTC_CONTEXT,
+ * RM_ALWON_SR_CORE_CONTEXT, RM_ALWON_SR_IVA_CONTEXT, RM_ALWON_SR_MPU_CONTEXT,
+ * RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT, RM_L4PER_ADC_CONTEXT,
+ * RM_L4PER_DMTIMER10_CONTEXT, RM_L4PER_DMTIMER11_CONTEXT,
+ * RM_L4PER_DMTIMER2_CONTEXT, RM_L4PER_DMTIMER3_CONTEXT,
+ * RM_L4PER_DMTIMER4_CONTEXT, RM_L4PER_DMTIMER9_CONTEXT, RM_L4PER_ELM_CONTEXT,
+ * RM_L4PER_HDQ1W_CONTEXT, RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT,
+ * RM_L4PER_I2C2_CONTEXT, RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT,
+ * RM_L4PER_I2C5_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCASP2_CONTEXT,
+ * RM_L4PER_MCASP3_CONTEXT, RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MCSPI1_CONTEXT,
+ * RM_L4PER_MCSPI2_CONTEXT, RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT,
+ * RM_L4PER_MGATE_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT,
+ * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_MSPROHG_CONTEXT,
+ * RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT,
+ * RM_TESLA_TESLA_CONTEXT, RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT
+ */
+#define OMAP4430_LOSTCONTEXT_DFF_SHIFT					(1 << 0)
+#define OMAP4430_LOSTCONTEXT_DFF_MASK					BITFIELD(0, 0)
+
+/*
+ * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_D2D_SAD2D_CONTEXT,
+ * RM_D2D_SAD2D_FW_CONTEXT, RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT,
+ * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_GPMC_CONTEXT,
+ * RM_L3_2_L3_2_CONTEXT, RM_L4CFG_HW_SEM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT,
+ * RM_L4CFG_MAILBOX_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT,
+ * RM_MEMIF_EMIF_2_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT, RM_MEMIF_EMIF_H1_CONTEXT,
+ * RM_MEMIF_EMIF_H2_CONTEXT, RM_SDMA_SDMA_CONTEXT, RM_L3INIT_HSI_CONTEXT,
+ * RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT, RM_L3INIT_MMC6_CONTEXT,
+ * RM_L3INIT_USB_HOST_CONTEXT, RM_L3INIT_USB_HOST_FS_CONTEXT,
+ * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_USB_TLL_CONTEXT, RM_DSS_DSS_CONTEXT,
+ * RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT, RM_L4PER_GPIO4_CONTEXT,
+ * RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT, RM_L4PER_I2C1_CONTEXT,
+ * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT, RM_L4PER_UART2_CONTEXT,
+ * RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, RM_L4SEC_AES1_CONTEXT,
+ * RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT, RM_L4SEC_DES3DES_CONTEXT,
+ * RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT, RM_TESLA_TESLA_CONTEXT
+ */
+#define OMAP4430_LOSTCONTEXT_RFF_SHIFT					(1 << 1)
+#define OMAP4430_LOSTCONTEXT_RFF_MASK					BITFIELD(1, 1)
+
+/* Used by RM_ABE_AESS_CONTEXT */
+#define OMAP4430_LOSTMEM_AESSMEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_AESSMEM_MASK					BITFIELD(8, 8)
+
+/* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */
+#define OMAP4430_LOSTMEM_CAM_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_CAM_MEM_MASK					BITFIELD(8, 8)
+
+/* Used by RM_L3INSTR_OCP_WP1_CONTEXT */
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK				BITFIELD(8, 8)
+
+/* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_MEMIF_DMM_CONTEXT */
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT			(1 << 9)
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK			BITFIELD(9, 9)
+
+/* Used by RM_L3_2_OCMC_RAM_CONTEXT */
+#define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK				BITFIELD(8, 8)
+
+/*
+ * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_MEMIF_DMM_CONTEXT,
+ * RM_SDMA_SDMA_CONTEXT
+ */
+#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK				BITFIELD(8, 8)
+
+/* Used by RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT */
+#define OMAP4430_LOSTMEM_DSS_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_DSS_MEM_MASK					BITFIELD(8, 8)
+
+/* Used by RM_DUCATI_DUCATI_CONTEXT */
+#define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT				(1 << 9)
+#define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK				BITFIELD(9, 9)
+
+/* Used by RM_DUCATI_DUCATI_CONTEXT */
+#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK				BITFIELD(8, 8)
+
+/* Used by RM_EMU_DEBUGSS_CONTEXT */
+#define OMAP4430_LOSTMEM_EMU_BANK_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_EMU_BANK_MASK					BITFIELD(8, 8)
+
+/* Used by RM_GFX_GFX_CONTEXT */
+#define OMAP4430_LOSTMEM_GFX_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_GFX_MEM_MASK					BITFIELD(8, 8)
+
+/* Used by RM_IVAHD_IVAHD_CONTEXT */
+#define OMAP4430_LOSTMEM_HWA_MEM_SHIFT					(1 << 10)
+#define OMAP4430_LOSTMEM_HWA_MEM_MASK					BITFIELD(10, 10)
+
+/*
+ * Used by RM_L3INIT_CCPTX_CONTEXT, RM_L3INIT_EMAC_CONTEXT,
+ * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT,
+ * RM_L3INIT_MMC6_CONTEXT, RM_L3INIT_PCIESS_CONTEXT, RM_L3INIT_SATA_CONTEXT,
+ * RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
+ * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_XHPI_CONTEXT
+ */
+#define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK				BITFIELD(8, 8)
+
+/* Used by RM_MPU_MPU_CONTEXT */
+#define OMAP4430_LOSTMEM_MPU_L1_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_MPU_L1_MASK					BITFIELD(8, 8)
+
+/* Used by RM_MPU_MPU_CONTEXT */
+#define OMAP4430_LOSTMEM_MPU_L2_SHIFT					(1 << 9)
+#define OMAP4430_LOSTMEM_MPU_L2_MASK					BITFIELD(9, 9)
+
+/* Used by RM_MPU_MPU_CONTEXT */
+#define OMAP4430_LOSTMEM_MPU_RAM_SHIFT					(1 << 10)
+#define OMAP4430_LOSTMEM_MPU_RAM_MASK					BITFIELD(10, 10)
+
+/*
+ * Used by RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT,
+ * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT,
+ * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT
+ */
+#define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK				BITFIELD(8, 8)
+
+/*
+ * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT,
+ * RM_ABE_MCBSP3_CONTEXT, RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT
+ */
+#define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_PERIHPMEM_MASK					BITFIELD(8, 8)
+
+/*
+ * Used by RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_UART1_CONTEXT,
+ * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT,
+ * RM_L4SEC_CRYPTODMA_CONTEXT
+ */
+#define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_RETAINED_BANK_MASK				BITFIELD(8, 8)
+
+/* Used by RM_IVAHD_SL2_CONTEXT */
+#define OMAP4430_LOSTMEM_SL2_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_SL2_MEM_MASK					BITFIELD(8, 8)
+
+/* Used by RM_IVAHD_IVAHD_CONTEXT */
+#define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_TCM1_MEM_MASK					BITFIELD(8, 8)
+
+/* Used by RM_IVAHD_IVAHD_CONTEXT */
+#define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT					(1 << 9)
+#define OMAP4430_LOSTMEM_TCM2_MEM_MASK					BITFIELD(9, 9)
+
+/* Used by RM_TESLA_TESLA_CONTEXT */
+#define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT				(1 << 10)
+#define OMAP4430_LOSTMEM_TESLA_EDMA_MASK				BITFIELD(10, 10)
+
+/* Used by RM_TESLA_TESLA_CONTEXT */
+#define OMAP4430_LOSTMEM_TESLA_L1_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_TESLA_L1_MASK					BITFIELD(8, 8)
+
+/* Used by RM_TESLA_TESLA_CONTEXT */
+#define OMAP4430_LOSTMEM_TESLA_L2_SHIFT					(1 << 9)
+#define OMAP4430_LOSTMEM_TESLA_L2_MASK					BITFIELD(9, 9)
+
+/* Used by RM_WKUP_SARRAM_CONTEXT */
+#define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_WKUP_BANK_MASK					BITFIELD(8, 8)
+
+/*
+ * Used by PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_L3INIT_PWRSTCTRL,
+ * PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL,
+ * PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL
+ */
+#define OMAP4430_LOWPOWERSTATECHANGE_SHIFT				(1 << 4)
+#define OMAP4430_LOWPOWERSTATECHANGE_MASK				BITFIELD(4, 4)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_MEMORYCHANGE_SHIFT					(1 << 3)
+#define OMAP4430_MEMORYCHANGE_MASK					BITFIELD(3, 3)
+
+/* Used by PRM_MODEM_IF_CTRL */
+#define OMAP4430_MODEM_READY_SHIFT					(1 << 1)
+#define OMAP4430_MODEM_READY_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_MODEM_IF_CTRL */
+#define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT				(1 << 9)
+#define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK				BITFIELD(9, 9)
+
+/* Used by PRM_MODEM_IF_CTRL */
+#define OMAP4430_MODEM_SLEEP_ST_SHIFT					(1 << 16)
+#define OMAP4430_MODEM_SLEEP_ST_MASK					BITFIELD(16, 16)
+
+/* Used by PRM_MODEM_IF_CTRL */
+#define OMAP4430_MODEM_WAKE_IRQ_SHIFT					(1 << 8)
+#define OMAP4430_MODEM_WAKE_IRQ_MASK					BITFIELD(8, 8)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define OMAP4430_MPU_L1_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_MPU_L1_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define OMAP4430_MPU_L1_RETSTATE_SHIFT					(1 << 8)
+#define OMAP4430_MPU_L1_RETSTATE_MASK					BITFIELD(8, 8)
+
+/* Used by PM_MPU_PWRSTST */
+#define OMAP4430_MPU_L1_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_MPU_L1_STATEST_MASK					BITFIELD(4, 5)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define OMAP4430_MPU_L2_ONSTATE_SHIFT					(1 << 18)
+#define OMAP4430_MPU_L2_ONSTATE_MASK					BITFIELD(18, 19)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define OMAP4430_MPU_L2_RETSTATE_SHIFT					(1 << 9)
+#define OMAP4430_MPU_L2_RETSTATE_MASK					BITFIELD(9, 9)
+
+/* Used by PM_MPU_PWRSTST */
+#define OMAP4430_MPU_L2_STATEST_SHIFT					(1 << 6)
+#define OMAP4430_MPU_L2_STATEST_MASK					BITFIELD(6, 7)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define OMAP4430_MPU_RAM_ONSTATE_SHIFT					(1 << 20)
+#define OMAP4430_MPU_RAM_ONSTATE_MASK					BITFIELD(20, 21)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define OMAP4430_MPU_RAM_RETSTATE_SHIFT					(1 << 10)
+#define OMAP4430_MPU_RAM_RETSTATE_MASK					BITFIELD(10, 10)
+
+/* Used by PM_MPU_PWRSTST */
+#define OMAP4430_MPU_RAM_STATEST_SHIFT					(1 << 8)
+#define OMAP4430_MPU_RAM_STATEST_MASK					BITFIELD(8, 9)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT				(1 << 2)
+#define OMAP4430_MPU_SECURITY_VIOL_RST_MASK				BITFIELD(2, 2)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_MPU_WDT_RST_SHIFT					(1 << 3)
+#define OMAP4430_MPU_WDT_RST_MASK					BITFIELD(3, 3)
+
+/* Used by PM_L4PER_PWRSTCTRL */
+#define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT				(1 << 18)
+#define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK				BITFIELD(18, 19)
+
+/* Used by PM_L4PER_PWRSTCTRL */
+#define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT			(1 << 9)
+#define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK				BITFIELD(9, 9)
+
+/* Used by PM_L4PER_PWRSTST */
+#define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT				(1 << 6)
+#define OMAP4430_NONRETAINED_BANK_STATEST_MASK				BITFIELD(6, 7)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT				(1 << 24)
+#define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK				BITFIELD(24, 25)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT				(1 << 12)
+#define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK				BITFIELD(12, 12)
+
+/* Used by PM_CORE_PWRSTST */
+#define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT				(1 << 12)
+#define OMAP4430_OCP_NRET_BANK_STATEST_MASK				BITFIELD(12, 13)
+
+/*
+ * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
+ * PRM_VC_VAL_CMD_VDD_MPU_L
+ */
+#define OMAP4430_OFF_SHIFT						(1 << 0)
+#define OMAP4430_OFF_MASK						BITFIELD(0, 7)
+
+/* Used by PRM_LDO_BANDGAP_CTRL */
+#define OMAP4430_OFF_ENABLE_SHIFT					(1 << 0)
+#define OMAP4430_OFF_ENABLE_MASK					BITFIELD(0, 0)
+
+/*
+ * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
+ * PRM_VC_VAL_CMD_VDD_MPU_L
+ */
+#define OMAP4430_ON_SHIFT						(1 << 24)
+#define OMAP4430_ON_MASK						BITFIELD(24, 31)
+
+/*
+ * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
+ * PRM_VC_VAL_CMD_VDD_MPU_L
+ */
+#define OMAP4430_ONLP_SHIFT						(1 << 16)
+#define OMAP4430_ONLP_MASK						BITFIELD(16, 23)
+
+/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
+#define OMAP4430_OPP_CHANGE_SHIFT					(1 << 2)
+#define OMAP4430_OPP_CHANGE_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
+#define OMAP4430_OPP_SEL_SHIFT						(1 << 0)
+#define OMAP4430_OPP_SEL_MASK						BITFIELD(0, 1)
+
+/* Used by PRM_SRAM_COUNT */
+#define OMAP4430_PCHARGECNT_VALUE_SHIFT					(1 << 0)
+#define OMAP4430_PCHARGECNT_VALUE_MASK					BITFIELD(0, 5)
+
+/* Used by PRM_PSCON_COUNT */
+#define OMAP4430_PCHARGE_TIME_SHIFT					(1 << 0)
+#define OMAP4430_PCHARGE_TIME_MASK					BITFIELD(0, 7)
+
+/* Used by PM_ABE_PWRSTCTRL */
+#define OMAP4430_PERIPHMEM_ONSTATE_SHIFT				(1 << 20)
+#define OMAP4430_PERIPHMEM_ONSTATE_MASK					BITFIELD(20, 21)
+
+/* Used by PM_ABE_PWRSTCTRL */
+#define OMAP4430_PERIPHMEM_RETSTATE_SHIFT				(1 << 10)
+#define OMAP4430_PERIPHMEM_RETSTATE_MASK				BITFIELD(10, 10)
+
+/* Used by PM_ABE_PWRSTST */
+#define OMAP4430_PERIPHMEM_STATEST_SHIFT				(1 << 8)
+#define OMAP4430_PERIPHMEM_STATEST_MASK					BITFIELD(8, 9)
+
+/* Used by PRM_PHASE1_CNDP */
+#define OMAP4430_PHASE1_CNDP_SHIFT					(1 << 0)
+#define OMAP4430_PHASE1_CNDP_MASK					BITFIELD(0, 31)
+
+/* Used by PRM_PHASE2A_CNDP */
+#define OMAP4430_PHASE2A_CNDP_SHIFT					(1 << 0)
+#define OMAP4430_PHASE2A_CNDP_MASK					BITFIELD(0, 31)
+
+/* Used by PRM_PHASE2B_CNDP */
+#define OMAP4430_PHASE2B_CNDP_SHIFT					(1 << 0)
+#define OMAP4430_PHASE2B_CNDP_MASK					BITFIELD(0, 31)
+
+/* Used by PRM_PSCON_COUNT */
+#define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT				(1 << 8)
+#define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK				BITFIELD(8, 15)
+
+/*
+ * Used by PM_EMU_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL,
+ * PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL,
+ * PM_CEFUSE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL,
+ * PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL
+ */
+#define OMAP4430_POWERSTATE_SHIFT					(1 << 0)
+#define OMAP4430_POWERSTATE_MASK					BITFIELD(0, 1)
+
+/*
+ * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST,
+ * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
+ * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
+ */
+#define OMAP4430_POWERSTATEST_SHIFT					(1 << 0)
+#define OMAP4430_POWERSTATEST_MASK					BITFIELD(0, 1)
+
+/* Used by PRM_PWRREQCTRL */
+#define OMAP4430_PWRREQ_COND_SHIFT					(1 << 0)
+#define OMAP4430_PWRREQ_COND_MASK					BITFIELD(0, 1)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RACEN_VDD_CORE_L_SHIFT					(1 << 3)
+#define OMAP4430_RACEN_VDD_CORE_L_MASK					BITFIELD(3, 3)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RACEN_VDD_IVA_L_SHIFT					(1 << 11)
+#define OMAP4430_RACEN_VDD_IVA_L_MASK					BITFIELD(11, 11)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RACEN_VDD_MPU_L_SHIFT					(1 << 20)
+#define OMAP4430_RACEN_VDD_MPU_L_MASK					BITFIELD(20, 20)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RAC_VDD_CORE_L_SHIFT					(1 << 2)
+#define OMAP4430_RAC_VDD_CORE_L_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RAC_VDD_IVA_L_SHIFT					(1 << 10)
+#define OMAP4430_RAC_VDD_IVA_L_MASK					BITFIELD(10, 10)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RAC_VDD_MPU_L_SHIFT					(1 << 19)
+#define OMAP4430_RAC_VDD_MPU_L_MASK					BITFIELD(19, 19)
+
+/*
+ * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
+ * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
+ * PRM_VOLTSETUP_MPU_RET_SLEEP
+ */
+#define OMAP4430_RAMP_DOWN_COUNT_SHIFT					(1 << 16)
+#define OMAP4430_RAMP_DOWN_COUNT_MASK					BITFIELD(16, 21)
+
+/*
+ * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
+ * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
+ * PRM_VOLTSETUP_MPU_RET_SLEEP
+ */
+#define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT				(1 << 24)
+#define OMAP4430_RAMP_DOWN_PRESCAL_MASK					BITFIELD(24, 25)
+
+/*
+ * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
+ * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
+ * PRM_VOLTSETUP_MPU_RET_SLEEP
+ */
+#define OMAP4430_RAMP_UP_COUNT_SHIFT					(1 << 0)
+#define OMAP4430_RAMP_UP_COUNT_MASK					BITFIELD(0, 5)
+
+/*
+ * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
+ * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
+ * PRM_VOLTSETUP_MPU_RET_SLEEP
+ */
+#define OMAP4430_RAMP_UP_PRESCAL_SHIFT					(1 << 8)
+#define OMAP4430_RAMP_UP_PRESCAL_MASK					BITFIELD(8, 9)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RAV_VDD_CORE_L_SHIFT					(1 << 1)
+#define OMAP4430_RAV_VDD_CORE_L_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RAV_VDD_IVA_L_SHIFT					(1 << 9)
+#define OMAP4430_RAV_VDD_IVA_L_MASK					BITFIELD(9, 9)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RAV_VDD_MPU_L_SHIFT					(1 << 18)
+#define OMAP4430_RAV_VDD_MPU_L_MASK					BITFIELD(18, 18)
+
+/* Used by PRM_VC_VAL_BYPASS */
+#define OMAP4430_REGADDR_SHIFT						(1 << 8)
+#define OMAP4430_REGADDR_MASK						BITFIELD(8, 15)
+
+/*
+ * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
+ * PRM_VC_VAL_CMD_VDD_MPU_L
+ */
+#define OMAP4430_RET_SHIFT						(1 << 8)
+#define OMAP4430_RET_MASK						BITFIELD(8, 15)
+
+/* Used by PM_L4PER_PWRSTCTRL */
+#define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT				(1 << 16)
+#define OMAP4430_RETAINED_BANK_ONSTATE_MASK				BITFIELD(16, 17)
+
+/* Used by PM_L4PER_PWRSTCTRL */
+#define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT				(1 << 8)
+#define OMAP4430_RETAINED_BANK_RETSTATE_MASK				BITFIELD(8, 8)
+
+/* Used by PM_L4PER_PWRSTST */
+#define OMAP4430_RETAINED_BANK_STATEST_SHIFT				(1 << 4)
+#define OMAP4430_RETAINED_BANK_STATEST_MASK				BITFIELD(4, 5)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
+ * PRM_LDO_SRAM_MPU_CTRL
+ */
+#define OMAP4430_RETMODE_ENABLE_SHIFT					(1 << 0)
+#define OMAP4430_RETMODE_ENABLE_MASK					BITFIELD(0, 0)
+
+/* Used by REVISION_PRM */
+#define OMAP4430_REV_SHIFT						(1 << 0)
+#define OMAP4430_REV_MASK						BITFIELD(0, 7)
+
+/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */
+#define OMAP4430_RST1_SHIFT						(1 << 0)
+#define OMAP4430_RST1_MASK						BITFIELD(0, 0)
+
+/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */
+#define OMAP4430_RST1ST_SHIFT						(1 << 0)
+#define OMAP4430_RST1ST_MASK						BITFIELD(0, 0)
+
+/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */
+#define OMAP4430_RST2_SHIFT						(1 << 1)
+#define OMAP4430_RST2_MASK						BITFIELD(1, 1)
+
+/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */
+#define OMAP4430_RST2ST_SHIFT						(1 << 1)
+#define OMAP4430_RST2ST_MASK						BITFIELD(1, 1)
+
+/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL */
+#define OMAP4430_RST3_SHIFT						(1 << 2)
+#define OMAP4430_RST3_MASK						BITFIELD(2, 2)
+
+/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST */
+#define OMAP4430_RST3ST_SHIFT						(1 << 2)
+#define OMAP4430_RST3ST_MASK						BITFIELD(2, 2)
+
+/* Used by PRM_RSTTIME */
+#define OMAP4430_RSTTIME1_SHIFT						(1 << 0)
+#define OMAP4430_RSTTIME1_MASK						BITFIELD(0, 9)
+
+/* Used by PRM_RSTTIME */
+#define OMAP4430_RSTTIME2_SHIFT						(1 << 10)
+#define OMAP4430_RSTTIME2_MASK						BITFIELD(10, 14)
+
+/* Used by PRM_RSTCTRL */
+#define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT				(1 << 1)
+#define OMAP4430_RST_GLOBAL_COLD_SW_MASK				BITFIELD(1, 1)
+
+/* Used by PRM_RSTCTRL */
+#define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT				(1 << 0)
+#define OMAP4430_RST_GLOBAL_WARM_SW_MASK				BITFIELD(0, 0)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_SA_VDD_CORE_L_SHIFT					(1 << 0)
+#define OMAP4430_SA_VDD_CORE_L_MASK					BITFIELD(0, 0)
+
+/* Renamed from SA_VDD_CORE_L Used by PRM_VC_SMPS_SA */
+#define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT				(1 << 0)
+#define OMAP4430_SA_VDD_CORE_L_0_6_MASK					BITFIELD(0, 6)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_SA_VDD_IVA_L_SHIFT					(1 << 8)
+#define OMAP4430_SA_VDD_IVA_L_MASK					BITFIELD(8, 8)
+
+/* Renamed from SA_VDD_IVA_L Used by PRM_VC_SMPS_SA */
+#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT			(1 << 8)
+#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK			BITFIELD(8, 14)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_SA_VDD_MPU_L_SHIFT					(1 << 16)
+#define OMAP4430_SA_VDD_MPU_L_MASK					BITFIELD(16, 16)
+
+/* Renamed from SA_VDD_MPU_L Used by PRM_VC_SMPS_SA */
+#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT			(1 << 16)
+#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK			BITFIELD(16, 22)
+
+/* Used by PRM_VC_CFG_I2C_CLK */
+#define OMAP4430_SCLH_SHIFT						(1 << 0)
+#define OMAP4430_SCLH_MASK						BITFIELD(0, 7)
+
+/* Used by PRM_VC_CFG_I2C_CLK */
+#define OMAP4430_SCLL_SHIFT						(1 << 8)
+#define OMAP4430_SCLL_MASK						BITFIELD(8, 15)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_SECURE_WDT_RST_SHIFT					(1 << 4)
+#define OMAP4430_SECURE_WDT_RST_MASK					BITFIELD(4, 4)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_SL2_MEM_ONSTATE_SHIFT					(1 << 18)
+#define OMAP4430_SL2_MEM_ONSTATE_MASK					BITFIELD(18, 19)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_SL2_MEM_RETSTATE_SHIFT					(1 << 9)
+#define OMAP4430_SL2_MEM_RETSTATE_MASK					BITFIELD(9, 9)
+
+/* Used by PM_IVAHD_PWRSTST */
+#define OMAP4430_SL2_MEM_STATEST_SHIFT					(1 << 6)
+#define OMAP4430_SL2_MEM_STATEST_MASK					BITFIELD(6, 7)
+
+/* Used by PRM_VC_VAL_BYPASS */
+#define OMAP4430_SLAVEADDR_SHIFT					(1 << 0)
+#define OMAP4430_SLAVEADDR_MASK						BITFIELD(0, 6)
+
+/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
+#define OMAP4430_SLEEP_RBB_SEL_SHIFT					(1 << 3)
+#define OMAP4430_SLEEP_RBB_SEL_MASK					BITFIELD(3, 3)
+
+/* Used by PRM_SRAM_COUNT */
+#define OMAP4430_SLPCNT_VALUE_SHIFT					(1 << 16)
+#define OMAP4430_SLPCNT_VALUE_MASK					BITFIELD(16, 23)
+
+/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
+#define OMAP4430_SMPSWAITTIMEMAX_SHIFT					(1 << 8)
+#define OMAP4430_SMPSWAITTIMEMAX_MASK					BITFIELD(8, 23)
+
+/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
+#define OMAP4430_SMPSWAITTIMEMIN_SHIFT					(1 << 8)
+#define OMAP4430_SMPSWAITTIMEMIN_MASK					BITFIELD(8, 23)
+
+/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
+#define OMAP4430_SR2EN_SHIFT						(1 << 0)
+#define OMAP4430_SR2EN_MASK						BITFIELD(0, 0)
+
+/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
+#define OMAP4430_SR2_IN_TRANSITION_SHIFT				(1 << 6)
+#define OMAP4430_SR2_IN_TRANSITION_MASK					BITFIELD(6, 6)
+
+/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
+#define OMAP4430_SR2_STATUS_SHIFT					(1 << 3)
+#define OMAP4430_SR2_STATUS_MASK					BITFIELD(3, 4)
+
+/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
+#define OMAP4430_SR2_WTCNT_VALUE_SHIFT					(1 << 8)
+#define OMAP4430_SR2_WTCNT_VALUE_MASK					BITFIELD(8, 15)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
+ * PRM_LDO_SRAM_MPU_CTRL
+ */
+#define OMAP4430_SRAMLDO_STATUS_SHIFT					(1 << 8)
+#define OMAP4430_SRAMLDO_STATUS_MASK					BITFIELD(8, 8)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
+ * PRM_LDO_SRAM_MPU_CTRL
+ */
+#define OMAP4430_SRAM_IN_TRANSITION_SHIFT				(1 << 9)
+#define OMAP4430_SRAM_IN_TRANSITION_MASK				BITFIELD(9, 9)
+
+/* Used by PRM_VC_CFG_I2C_MODE */
+#define OMAP4430_SRMODEEN_SHIFT						(1 << 4)
+#define OMAP4430_SRMODEEN_MASK						BITFIELD(4, 4)
+
+/* Used by PRM_VOLTSETUP_WARMRESET */
+#define OMAP4430_STABLE_COUNT_SHIFT					(1 << 0)
+#define OMAP4430_STABLE_COUNT_MASK					BITFIELD(0, 5)
+
+/* Used by PRM_VOLTSETUP_WARMRESET */
+#define OMAP4430_STABLE_PRESCAL_SHIFT					(1 << 8)
+#define OMAP4430_STABLE_PRESCAL_MASK					BITFIELD(8, 9)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_TCM1_MEM_ONSTATE_SHIFT					(1 << 20)
+#define OMAP4430_TCM1_MEM_ONSTATE_MASK					BITFIELD(20, 21)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_TCM1_MEM_RETSTATE_SHIFT				(1 << 10)
+#define OMAP4430_TCM1_MEM_RETSTATE_MASK					BITFIELD(10, 10)
+
+/* Used by PM_IVAHD_PWRSTST */
+#define OMAP4430_TCM1_MEM_STATEST_SHIFT					(1 << 8)
+#define OMAP4430_TCM1_MEM_STATEST_MASK					BITFIELD(8, 9)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_TCM2_MEM_ONSTATE_SHIFT					(1 << 22)
+#define OMAP4430_TCM2_MEM_ONSTATE_MASK					BITFIELD(22, 23)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_TCM2_MEM_RETSTATE_SHIFT				(1 << 11)
+#define OMAP4430_TCM2_MEM_RETSTATE_MASK					BITFIELD(11, 11)
+
+/* Used by PM_IVAHD_PWRSTST */
+#define OMAP4430_TCM2_MEM_STATEST_SHIFT					(1 << 10)
+#define OMAP4430_TCM2_MEM_STATEST_MASK					BITFIELD(10, 11)
+
+/* Used by RM_TESLA_RSTST */
+#define OMAP4430_TESLASS_EMU_RSTST_SHIFT				(1 << 2)
+#define OMAP4430_TESLASS_EMU_RSTST_MASK					BITFIELD(2, 2)
+
+/* Used by RM_TESLA_RSTST */
+#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT				(1 << 3)
+#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK				BITFIELD(3, 3)
+
+/* Used by PM_TESLA_PWRSTCTRL */
+#define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT				(1 << 20)
+#define OMAP4430_TESLA_EDMA_ONSTATE_MASK				BITFIELD(20, 21)
+
+/* Used by PM_TESLA_PWRSTCTRL */
+#define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT				(1 << 10)
+#define OMAP4430_TESLA_EDMA_RETSTATE_MASK				BITFIELD(10, 10)
+
+/* Used by PM_TESLA_PWRSTST */
+#define OMAP4430_TESLA_EDMA_STATEST_SHIFT				(1 << 8)
+#define OMAP4430_TESLA_EDMA_STATEST_MASK				BITFIELD(8, 9)
+
+/* Used by PM_TESLA_PWRSTCTRL */
+#define OMAP4430_TESLA_L1_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_TESLA_L1_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_TESLA_PWRSTCTRL */
+#define OMAP4430_TESLA_L1_RETSTATE_SHIFT				(1 << 8)
+#define OMAP4430_TESLA_L1_RETSTATE_MASK					BITFIELD(8, 8)
+
+/* Used by PM_TESLA_PWRSTST */
+#define OMAP4430_TESLA_L1_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_TESLA_L1_STATEST_MASK					BITFIELD(4, 5)
+
+/* Used by PM_TESLA_PWRSTCTRL */
+#define OMAP4430_TESLA_L2_ONSTATE_SHIFT					(1 << 18)
+#define OMAP4430_TESLA_L2_ONSTATE_MASK					BITFIELD(18, 19)
+
+/* Used by PM_TESLA_PWRSTCTRL */
+#define OMAP4430_TESLA_L2_RETSTATE_SHIFT				(1 << 9)
+#define OMAP4430_TESLA_L2_RETSTATE_MASK					BITFIELD(9, 9)
+
+/* Used by PM_TESLA_PWRSTST */
+#define OMAP4430_TESLA_L2_STATEST_SHIFT					(1 << 6)
+#define OMAP4430_TESLA_L2_STATEST_MASK					BITFIELD(6, 7)
+
+/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
+#define OMAP4430_TIMEOUT_SHIFT						(1 << 0)
+#define OMAP4430_TIMEOUT_MASK						BITFIELD(0, 15)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_TIMEOUTEN_SHIFT					(1 << 3)
+#define OMAP4430_TIMEOUTEN_MASK						BITFIELD(3, 3)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_TRANSITION_EN_SHIFT					(1 << 8)
+#define OMAP4430_TRANSITION_EN_MASK					BITFIELD(8, 8)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_TRANSITION_ST_SHIFT					(1 << 8)
+#define OMAP4430_TRANSITION_ST_MASK					BITFIELD(8, 8)
+
+/* Used by PRM_VC_VAL_BYPASS */
+#define OMAP4430_VALID_SHIFT						(1 << 24)
+#define OMAP4430_VALID_MASK						BITFIELD(24, 24)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VC_BYPASSACK_EN_SHIFT					(1 << 14)
+#define OMAP4430_VC_BYPASSACK_EN_MASK					BITFIELD(14, 14)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VC_BYPASSACK_ST_SHIFT					(1 << 14)
+#define OMAP4430_VC_BYPASSACK_ST_MASK					BITFIELD(14, 14)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VC_IVA_VPACK_EN_SHIFT					(1 << 30)
+#define OMAP4430_VC_IVA_VPACK_EN_MASK					BITFIELD(30, 30)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VC_IVA_VPACK_ST_SHIFT					(1 << 30)
+#define OMAP4430_VC_IVA_VPACK_ST_MASK					BITFIELD(30, 30)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VC_MPU_VPACK_EN_SHIFT					(1 << 6)
+#define OMAP4430_VC_MPU_VPACK_EN_MASK					BITFIELD(6, 6)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VC_MPU_VPACK_ST_SHIFT					(1 << 6)
+#define OMAP4430_VC_MPU_VPACK_ST_MASK					BITFIELD(6, 6)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VC_RAERR_EN_SHIFT					(1 << 12)
+#define OMAP4430_VC_RAERR_EN_MASK					BITFIELD(12, 12)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VC_RAERR_ST_SHIFT					(1 << 12)
+#define OMAP4430_VC_RAERR_ST_MASK					BITFIELD(12, 12)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VC_SAERR_EN_SHIFT					(1 << 11)
+#define OMAP4430_VC_SAERR_EN_MASK					BITFIELD(11, 11)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VC_SAERR_ST_SHIFT					(1 << 11)
+#define OMAP4430_VC_SAERR_ST_MASK					BITFIELD(11, 11)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VC_TOERR_EN_SHIFT					(1 << 13)
+#define OMAP4430_VC_TOERR_EN_MASK					BITFIELD(13, 13)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VC_TOERR_ST_SHIFT					(1 << 13)
+#define OMAP4430_VC_TOERR_ST_MASK					BITFIELD(13, 13)
+
+/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
+#define OMAP4430_VDDMAX_SHIFT						(1 << 24)
+#define OMAP4430_VDDMAX_MASK						BITFIELD(24, 31)
+
+/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
+#define OMAP4430_VDDMIN_SHIFT						(1 << 16)
+#define OMAP4430_VDDMIN_MASK						BITFIELD(16, 23)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT				(1 << 12)
+#define OMAP4430_VDD_CORE_I2C_DISABLE_MASK				BITFIELD(12, 12)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT				(1 << 8)
+#define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK				BITFIELD(8, 8)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT				(1 << 14)
+#define OMAP4430_VDD_IVA_I2C_DISABLE_MASK				BITFIELD(14, 14)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_VDD_IVA_PRESENCE_SHIFT					(1 << 9)
+#define OMAP4430_VDD_IVA_PRESENCE_MASK					BITFIELD(9, 9)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT				(1 << 7)
+#define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK				BITFIELD(7, 7)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT				(1 << 13)
+#define OMAP4430_VDD_MPU_I2C_DISABLE_MASK				BITFIELD(13, 13)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_VDD_MPU_PRESENCE_SHIFT					(1 << 8)
+#define OMAP4430_VDD_MPU_PRESENCE_MASK					BITFIELD(8, 8)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT				(1 << 6)
+#define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK				BITFIELD(6, 6)
+
+/* Used by PRM_VC_VAL_SMPS_RA_VOL */
+#define OMAP4430_VOLRA_VDD_CORE_L_SHIFT					(1 << 0)
+#define OMAP4430_VOLRA_VDD_CORE_L_MASK					BITFIELD(0, 7)
+
+/* Used by PRM_VC_VAL_SMPS_RA_VOL */
+#define OMAP4430_VOLRA_VDD_IVA_L_SHIFT					(1 << 8)
+#define OMAP4430_VOLRA_VDD_IVA_L_MASK					BITFIELD(8, 15)
+
+/* Used by PRM_VC_VAL_SMPS_RA_VOL */
+#define OMAP4430_VOLRA_VDD_MPU_L_SHIFT					(1 << 16)
+#define OMAP4430_VOLRA_VDD_MPU_L_MASK					BITFIELD(16, 23)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_VPENABLE_SHIFT						(1 << 0)
+#define OMAP4430_VPENABLE_MASK						BITFIELD(0, 0)
+
+/* Used by PRM_VP_CORE_STATUS, PRM_VP_IVA_STATUS, PRM_VP_MPU_STATUS */
+#define OMAP4430_VPINIDLE_SHIFT						(1 << 0)
+#define OMAP4430_VPINIDLE_MASK						BITFIELD(0, 0)
+
+/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
+#define OMAP4430_VPVOLTAGE_SHIFT					(1 << 0)
+#define OMAP4430_VPVOLTAGE_MASK						BITFIELD(0, 7)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT				(1 << 20)
+#define OMAP4430_VP_CORE_EQVALUE_EN_MASK				BITFIELD(20, 20)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT				(1 << 20)
+#define OMAP4430_VP_CORE_EQVALUE_ST_MASK				BITFIELD(20, 20)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT				(1 << 18)
+#define OMAP4430_VP_CORE_MAXVDD_EN_MASK					BITFIELD(18, 18)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT				(1 << 18)
+#define OMAP4430_VP_CORE_MAXVDD_ST_MASK					BITFIELD(18, 18)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_CORE_MINVDD_EN_SHIFT				(1 << 17)
+#define OMAP4430_VP_CORE_MINVDD_EN_MASK					BITFIELD(17, 17)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_CORE_MINVDD_ST_SHIFT				(1 << 17)
+#define OMAP4430_VP_CORE_MINVDD_ST_MASK					BITFIELD(17, 17)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT				(1 << 19)
+#define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK				BITFIELD(19, 19)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT				(1 << 19)
+#define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK				BITFIELD(19, 19)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT				(1 << 16)
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK				BITFIELD(16, 16)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT				(1 << 16)
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK				BITFIELD(16, 16)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT				(1 << 21)
+#define OMAP4430_VP_CORE_TRANXDONE_EN_MASK				BITFIELD(21, 21)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT				(1 << 21)
+#define OMAP4430_VP_CORE_TRANXDONE_ST_MASK				BITFIELD(21, 21)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT				(1 << 28)
+#define OMAP4430_VP_IVA_EQVALUE_EN_MASK					BITFIELD(28, 28)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT				(1 << 28)
+#define OMAP4430_VP_IVA_EQVALUE_ST_MASK					BITFIELD(28, 28)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT					(1 << 26)
+#define OMAP4430_VP_IVA_MAXVDD_EN_MASK					BITFIELD(26, 26)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT					(1 << 26)
+#define OMAP4430_VP_IVA_MAXVDD_ST_MASK					BITFIELD(26, 26)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_IVA_MINVDD_EN_SHIFT					(1 << 25)
+#define OMAP4430_VP_IVA_MINVDD_EN_MASK					BITFIELD(25, 25)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_IVA_MINVDD_ST_SHIFT					(1 << 25)
+#define OMAP4430_VP_IVA_MINVDD_ST_MASK					BITFIELD(25, 25)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT				(1 << 27)
+#define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK				BITFIELD(27, 27)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT				(1 << 27)
+#define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK				BITFIELD(27, 27)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT				(1 << 24)
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK				BITFIELD(24, 24)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT				(1 << 24)
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK				BITFIELD(24, 24)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT				(1 << 29)
+#define OMAP4430_VP_IVA_TRANXDONE_EN_MASK				BITFIELD(29, 29)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT				(1 << 29)
+#define OMAP4430_VP_IVA_TRANXDONE_ST_MASK				BITFIELD(29, 29)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT				(1 << 4)
+#define OMAP4430_VP_MPU_EQVALUE_EN_MASK					BITFIELD(4, 4)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT				(1 << 4)
+#define OMAP4430_VP_MPU_EQVALUE_ST_MASK					BITFIELD(4, 4)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT					(1 << 2)
+#define OMAP4430_VP_MPU_MAXVDD_EN_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT					(1 << 2)
+#define OMAP4430_VP_MPU_MAXVDD_ST_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VP_MPU_MINVDD_EN_SHIFT					(1 << 1)
+#define OMAP4430_VP_MPU_MINVDD_EN_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VP_MPU_MINVDD_ST_SHIFT					(1 << 1)
+#define OMAP4430_VP_MPU_MINVDD_ST_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT				(1 << 3)
+#define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK				BITFIELD(3, 3)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT				(1 << 3)
+#define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK				BITFIELD(3, 3)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT				(1 << 0)
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK				BITFIELD(0, 0)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT				(1 << 0)
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK				BITFIELD(0, 0)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT				(1 << 5)
+#define OMAP4430_VP_MPU_TRANXDONE_EN_MASK				BITFIELD(5, 5)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT				(1 << 5)
+#define OMAP4430_VP_MPU_TRANXDONE_ST_MASK				BITFIELD(5, 5)
+
+/* Used by PRM_SRAM_COUNT */
+#define OMAP4430_VSETUPCNT_VALUE_SHIFT					(1 << 8)
+#define OMAP4430_VSETUPCNT_VALUE_MASK					BITFIELD(8, 15)
+
+/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
+#define OMAP4430_VSTEPMAX_SHIFT						(1 << 0)
+#define OMAP4430_VSTEPMAX_MASK						BITFIELD(0, 7)
+
+/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
+#define OMAP4430_VSTEPMIN_SHIFT						(1 << 0)
+#define OMAP4430_VSTEPMIN_MASK						BITFIELD(0, 7)
+
+/* Used by PRM_MODEM_IF_CTRL */
+#define OMAP4430_WAKE_MODEM_SHIFT					(1 << 0)
+#define OMAP4430_WAKE_MODEM_MASK					BITFIELD(0, 0)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DISPC_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_DISPC_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_DISPC_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_DMIC_WKDEP */
+#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_ABE_DMIC_WKDEP */
+#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_ABE_DMIC_WKDEP */
+#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_DMIC_WKDEP */
+#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_DMTIMER10_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_DMTIMER11_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_DMTIMER11_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_DMTIMER2_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_DMTIMER3_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_DMTIMER3_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_DMTIMER4_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_DMTIMER4_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_DMTIMER9_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_DMTIMER9_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT				(1 << 5)
+#define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK				BITFIELD(5, 5)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT					(1 << 4)
+#define OMAP4430_WKUPDEP_DSI1_MPU_MASK					BITFIELD(4, 4)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_DSI1_SDMA_MASK					BITFIELD(7, 7)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_DSI1_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT				(1 << 9)
+#define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK				BITFIELD(9, 9)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT					(1 << 8)
+#define OMAP4430_WKUPDEP_DSI2_MPU_MASK					BITFIELD(8, 8)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT				(1 << 11)
+#define OMAP4430_WKUPDEP_DSI2_SDMA_MASK					BITFIELD(11, 11)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT				(1 << 10)
+#define OMAP4430_WKUPDEP_DSI2_TESLA_MASK				BITFIELD(10, 10)
+
+/* Used by PM_WKUP_GPIO1_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT			(1 << 1)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_WKUP_GPIO1_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_WKUP_GPIO1_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_GPIO2_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT			(1 << 1)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_GPIO2_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_GPIO2_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_GPIO3_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_GPIO3_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_GPIO4_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_GPIO4_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_GPIO5_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_GPIO5_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_GPIO6_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_GPIO6_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT				(1 << 19)
+#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK				BITFIELD(19, 19)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT				(1 << 13)
+#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK				BITFIELD(13, 13)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT				(1 << 12)
+#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK				BITFIELD(12, 12)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT				(1 << 14)
+#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK				BITFIELD(14, 14)
+
+/* Used by PM_L4PER_HECC1_WKDEP */
+#define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_HECC1_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L4PER_HECC2_WKDEP */
+#define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_HECC2_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_HSI_WKDEP */
+#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L3INIT_HSI_WKDEP */
+#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_HSI_WKDEP */
+#define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_I2C1_WKDEP */
+#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_I2C1_WKDEP */
+#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_I2C1_WKDEP */
+#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_I2C2_WKDEP */
+#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_I2C2_WKDEP */
+#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_I2C2_WKDEP */
+#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_I2C3_WKDEP */
+#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_I2C3_WKDEP */
+#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_I2C3_WKDEP */
+#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_I2C4_WKDEP */
+#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_I2C4_WKDEP */
+#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_I2C4_WKDEP */
+#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_I2C5_WKDEP */
+#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_I2C5_WKDEP */
+#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_WKUP_KEYBOARD_WKDEP */
+#define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_MCASP_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_ABE_MCASP_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_ABE_MCASP_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_MCASP_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_MCASP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_MCASP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_MCASP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCASP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_MCASP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_MCASP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_MCASP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCASP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_MCBSP1_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_MCBSP1_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_ABE_MCBSP1_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_MCBSP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_MCBSP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_ABE_MCBSP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_MCBSP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_MCBSP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_ABE_MCBSP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_MCBSP4_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCBSP4_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_MCBSP4_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_MCSPI1_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_MCSPI1_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCSPI1_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_MCSPI1_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_MCSPI2_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_MCSPI2_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCSPI2_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_MCSPI3_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCSPI3_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_MCSPI4_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCSPI4_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L3INIT_MMC1_WKDEP */
+#define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_MMC1_WKDEP */
+#define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_MMC1_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_MMC1_WKDEP */
+#define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMC1_SDMA_MASK					BITFIELD(3, 3)
+
+/* Used by PM_L3INIT_MMC1_WKDEP */
+#define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MMC1_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L3INIT_MMC2_WKDEP */
+#define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_MMC2_WKDEP */
+#define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_MMC2_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_MMC2_WKDEP */
+#define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMC2_SDMA_MASK					BITFIELD(3, 3)
+
+/* Used by PM_L3INIT_MMC2_WKDEP */
+#define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MMC2_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L3INIT_MMC6_WKDEP */
+#define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_MMC6_WKDEP */
+#define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_MMC6_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_MMC6_WKDEP */
+#define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MMC6_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_MMCSD3_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_MMCSD3_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MMCSD3_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_MMCSD4_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_MMCSD4_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MMCSD4_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_MMCSD5_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_MMCSD5_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MMCSD5_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L3INIT_PCIESS_WKDEP */
+#define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_PCIESS_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_PCIESS_WKDEP */
+#define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_PDM_WKDEP */
+#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_ABE_PDM_WKDEP */
+#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_ABE_PDM_WKDEP */
+#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_PDM_WKDEP */
+#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_WKUP_RTC_WKDEP */
+#define OMAP4430_WKUPDEP_RTC_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_RTC_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_SATA_WKDEP */
+#define OMAP4430_WKUPDEP_SATA_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_SATA_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_SATA_WKDEP */
+#define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_SATA_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_SLIMBUS_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT			(1 << 7)
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_ABE_SLIMBUS_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT			(1 << 6)
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK			BITFIELD(6, 6)
+
+/* Used by PM_ABE_SLIMBUS_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_SLIMBUS_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT			(1 << 2)
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK			BITFIELD(2, 2)
+
+/* Used by PM_L4PER_SLIMBUS2_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT			(1 << 7)
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_SLIMBUS2_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT			(1 << 6)
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK			BITFIELD(6, 6)
+
+/* Used by PM_L4PER_SLIMBUS2_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_SLIMBUS2_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT			(1 << 2)
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK			BITFIELD(2, 2)
+
+/* Used by PM_ALWON_SR_CORE_WKDEP */
+#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_ALWON_SR_CORE_WKDEP */
+#define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ALWON_SR_IVA_WKDEP */
+#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_ALWON_SR_IVA_WKDEP */
+#define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ALWON_SR_MPU_WKDEP */
+#define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_WKUP_TIMER12_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER12_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_WKUP_TIMER1_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_TIMER5_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER5_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_TIMER5_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_TIMER6_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER6_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_TIMER6_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_TIMER7_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER7_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_TIMER7_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_TIMER8_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER8_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_TIMER8_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_UART1_WKDEP */
+#define OMAP4430_WKUPDEP_UART1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UART1_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L4PER_UART1_WKDEP */
+#define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_UART1_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_UART2_WKDEP */
+#define OMAP4430_WKUPDEP_UART2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UART2_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L4PER_UART2_WKDEP */
+#define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_UART2_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_UART3_WKDEP */
+#define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_UART3_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_UART3_WKDEP */
+#define OMAP4430_WKUPDEP_UART3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UART3_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L4PER_UART3_WKDEP */
+#define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_UART3_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_UART3_WKDEP */
+#define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_UART3_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_UART4_WKDEP */
+#define OMAP4430_WKUPDEP_UART4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UART4_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L4PER_UART4_WKDEP */
+#define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_UART4_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L3INIT_UNIPRO1_WKDEP */
+#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_UNIPRO1_WKDEP */
+#define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_USB_HOST_WKDEP */
+#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
+#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT			(1 << 1)
+#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK			BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
+#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_USB_HOST_WKDEP */
+#define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_USB_OTG_WKDEP */
+#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_USB_OTG_WKDEP */
+#define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_USB_TLL_WKDEP */
+#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_USB_TLL_WKDEP */
+#define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_WKUP_USIM_WKDEP */
+#define OMAP4430_WKUPDEP_USIM_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_USIM_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_WKUP_USIM_WKDEP */
+#define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_USIM_SDMA_MASK					BITFIELD(3, 3)
+
+/* Used by PM_WKUP_WDT2_WKDEP */
+#define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_WKUP_WDT2_WKDEP */
+#define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_WDT2_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_ABE_WDT3_WKDEP */
+#define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_WDT3_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_HSI_WKDEP */
+#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT				(1 << 8)
+#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK				BITFIELD(8, 8)
+
+/* Used by PM_L3INIT_XHPI_WKDEP */
+#define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_WUCLK_CTRL_SHIFT					(1 << 8)
+#define OMAP4430_WUCLK_CTRL_MASK					BITFIELD(8, 8)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_WUCLK_STATUS_SHIFT					(1 << 9)
+#define OMAP4430_WUCLK_STATUS_MASK					BITFIELD(9, 9)
+#endif
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 03c467c35f54..ea050ce188a7 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -4,8 +4,8 @@
 /*
  * OMAP2/3 Power/Reset Management (PRM) register definitions
  *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -17,11 +17,15 @@
 #include "prcm-common.h"
 
 #define OMAP2420_PRM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
 #define OMAP2430_PRM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
 #define OMAP34XX_PRM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+#define OMAP44XX_PRM_REGADDR(module, reg)				\
+		OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
+
+#include "prm44xx.h"
 
 /*
  * Architecture-specific global PRM registers
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
new file mode 100644
index 000000000000..89be97f0589d
--- /dev/null
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -0,0 +1,411 @@
+/*
+ * OMAP44xx PRM instance offset macros
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM44XX_H
+
+
+/* PRM */
+
+
+/* PRM.OCP_SOCKET_PRM register offsets */
+#define OMAP4430_REVISION_PRM				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4430_PRM_IRQSTATUS_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0010)
+#define OMAP4430_PRM_IRQSTATUS_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0014)
+#define OMAP4430_PRM_IRQENABLE_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0018)
+#define OMAP4430_PRM_IRQENABLE_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x001c)
+#define OMAP4430_PRM_IRQSTATUS_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0020)
+#define OMAP4430_PRM_IRQENABLE_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0028)
+#define OMAP4430_PRM_IRQSTATUS_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0030)
+#define OMAP4430_PRM_IRQENABLE_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0038)
+#define OMAP4430_PRM_PRM_PROFILING_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040)
+
+/* PRM.CKGEN_PRM register offsets */
+#define OMAP4430_CM_ABE_DSS_SYS_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0000)
+#define OMAP4430_CM_DPLL_SYS_REF_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0004)
+#define OMAP4430_CM_L4_WKUP_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0008)
+#define OMAP4430_CM_ABE_PLL_REF_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x000c)
+#define OMAP4430_CM_SYS_CLKSEL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0010)
+
+/* PRM.MPU_PRM register offsets */
+#define OMAP4430_PM_MPU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0000)
+#define OMAP4430_PM_MPU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0004)
+#define OMAP4430_RM_MPU_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0014)
+#define OMAP4430_RM_MPU_MPU_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0024)
+
+/* PRM.TESLA_PRM register offsets */
+#define OMAP4430_PM_TESLA_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0000)
+#define OMAP4430_PM_TESLA_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0004)
+#define OMAP4430_RM_TESLA_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0010)
+#define OMAP4430_RM_TESLA_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0014)
+#define OMAP4430_RM_TESLA_TESLA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0024)
+
+/* PRM.ABE_PRM register offsets */
+#define OMAP4430_PM_ABE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0000)
+#define OMAP4430_PM_ABE_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0004)
+#define OMAP4430_RM_ABE_AESS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x002c)
+#define OMAP4430_PM_ABE_PDM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0030)
+#define OMAP4430_RM_ABE_PDM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0034)
+#define OMAP4430_PM_ABE_DMIC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0038)
+#define OMAP4430_RM_ABE_DMIC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x003c)
+#define OMAP4430_PM_ABE_MCASP_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0040)
+#define OMAP4430_RM_ABE_MCASP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0044)
+#define OMAP4430_PM_ABE_MCBSP1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0048)
+#define OMAP4430_RM_ABE_MCBSP1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x004c)
+#define OMAP4430_PM_ABE_MCBSP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0050)
+#define OMAP4430_RM_ABE_MCBSP2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0054)
+#define OMAP4430_PM_ABE_MCBSP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0058)
+#define OMAP4430_RM_ABE_MCBSP3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x005c)
+#define OMAP4430_PM_ABE_SLIMBUS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0060)
+#define OMAP4430_RM_ABE_SLIMBUS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0064)
+#define OMAP4430_PM_ABE_TIMER5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0068)
+#define OMAP4430_RM_ABE_TIMER5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x006c)
+#define OMAP4430_PM_ABE_TIMER6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0070)
+#define OMAP4430_RM_ABE_TIMER6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0074)
+#define OMAP4430_PM_ABE_TIMER7_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0078)
+#define OMAP4430_RM_ABE_TIMER7_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x007c)
+#define OMAP4430_PM_ABE_TIMER8_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0080)
+#define OMAP4430_RM_ABE_TIMER8_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0084)
+#define OMAP4430_PM_ABE_WDT3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0088)
+#define OMAP4430_RM_ABE_WDT3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x008c)
+
+/* PRM.ALWAYS_ON_PRM register offsets */
+#define OMAP4430_RM_ALWON_MDMINTC_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0024)
+#define OMAP4430_PM_ALWON_SR_MPU_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0028)
+#define OMAP4430_RM_ALWON_SR_MPU_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x002c)
+#define OMAP4430_PM_ALWON_SR_IVA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0030)
+#define OMAP4430_RM_ALWON_SR_IVA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0034)
+#define OMAP4430_PM_ALWON_SR_CORE_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0038)
+#define OMAP4430_RM_ALWON_SR_CORE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x003c)
+
+/* PRM.CORE_PRM register offsets */
+#define OMAP4430_PM_CORE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0000)
+#define OMAP4430_PM_CORE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0004)
+#define OMAP4430_RM_L3_1_L3_1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0024)
+#define OMAP4430_RM_L3_2_L3_2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0124)
+#define OMAP4430_RM_L3_2_GPMC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x012c)
+#define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0134)
+#define OMAP4430_RM_DUCATI_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0210)
+#define OMAP4430_RM_DUCATI_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0214)
+#define OMAP4430_RM_DUCATI_DUCATI_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0224)
+#define OMAP4430_RM_SDMA_SDMA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0324)
+#define OMAP4430_RM_MEMIF_DMM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0424)
+#define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x042c)
+#define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0434)
+#define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x043c)
+#define OMAP4430_RM_MEMIF_DLL_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0444)
+#define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0454)
+#define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x045c)
+#define OMAP4430_RM_MEMIF_DLL_H_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0464)
+#define OMAP4430_RM_D2D_SAD2D_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0524)
+#define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x052c)
+#define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0534)
+#define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0624)
+#define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x062c)
+#define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0634)
+#define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x063c)
+#define OMAP4430_RM_L3INSTR_L3_3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0724)
+#define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x072c)
+#define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0744)
+
+/* PRM.IVAHD_PRM register offsets */
+#define OMAP4430_PM_IVAHD_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0000)
+#define OMAP4430_PM_IVAHD_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0004)
+#define OMAP4430_RM_IVAHD_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0010)
+#define OMAP4430_RM_IVAHD_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0014)
+#define OMAP4430_RM_IVAHD_IVAHD_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0024)
+#define OMAP4430_RM_IVAHD_SL2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x002c)
+
+/* PRM.CAM_PRM register offsets */
+#define OMAP4430_PM_CAM_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0000)
+#define OMAP4430_PM_CAM_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0004)
+#define OMAP4430_RM_CAM_ISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0024)
+#define OMAP4430_RM_CAM_FDIF_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x002c)
+
+/* PRM.DSS_PRM register offsets */
+#define OMAP4430_PM_DSS_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0000)
+#define OMAP4430_PM_DSS_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0004)
+#define OMAP4430_PM_DSS_DSS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0020)
+#define OMAP4430_RM_DSS_DSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0024)
+#define OMAP4430_RM_DSS_DEISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x002c)
+
+/* PRM.GFX_PRM register offsets */
+#define OMAP4430_PM_GFX_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0000)
+#define OMAP4430_PM_GFX_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0004)
+#define OMAP4430_RM_GFX_GFX_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0024)
+
+/* PRM.L3INIT_PRM register offsets */
+#define OMAP4430_PM_L3INIT_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0000)
+#define OMAP4430_PM_L3INIT_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0004)
+#define OMAP4430_PM_L3INIT_MMC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0028)
+#define OMAP4430_RM_L3INIT_MMC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x002c)
+#define OMAP4430_PM_L3INIT_MMC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0030)
+#define OMAP4430_RM_L3INIT_MMC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0034)
+#define OMAP4430_PM_L3INIT_HSI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0038)
+#define OMAP4430_RM_L3INIT_HSI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x003c)
+#define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0040)
+#define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0044)
+#define OMAP4430_PM_L3INIT_USB_HOST_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0058)
+#define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x005c)
+#define OMAP4430_PM_L3INIT_USB_OTG_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0060)
+#define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0064)
+#define OMAP4430_PM_L3INIT_USB_TLL_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0068)
+#define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x006c)
+#define OMAP4430_RM_L3INIT_P1500_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x007c)
+#define OMAP4430_RM_L3INIT_EMAC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0084)
+#define OMAP4430_PM_L3INIT_SATA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0088)
+#define OMAP4430_RM_L3INIT_SATA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x008c)
+#define OMAP4430_RM_L3INIT_TPPSS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0094)
+#define OMAP4430_PM_L3INIT_PCIESS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0098)
+#define OMAP4430_RM_L3INIT_PCIESS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x009c)
+#define OMAP4430_RM_L3INIT_CCPTX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00ac)
+#define OMAP4430_PM_L3INIT_XHPI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c0)
+#define OMAP4430_RM_L3INIT_XHPI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c4)
+#define OMAP4430_PM_L3INIT_MMC6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c8)
+#define OMAP4430_RM_L3INIT_MMC6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00cc)
+#define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d0)
+#define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d4)
+#define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT	OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00e4)
+
+/* PRM.L4PER_PRM register offsets */
+#define OMAP4430_PM_L4PER_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0000)
+#define OMAP4430_PM_L4PER_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0004)
+#define OMAP4430_RM_L4PER_ADC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0024)
+#define OMAP4430_PM_L4PER_DMTIMER10_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0028)
+#define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x002c)
+#define OMAP4430_PM_L4PER_DMTIMER11_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0030)
+#define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0034)
+#define OMAP4430_PM_L4PER_DMTIMER2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0038)
+#define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x003c)
+#define OMAP4430_PM_L4PER_DMTIMER3_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0040)
+#define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0044)
+#define OMAP4430_PM_L4PER_DMTIMER4_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0048)
+#define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x004c)
+#define OMAP4430_PM_L4PER_DMTIMER9_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0050)
+#define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0054)
+#define OMAP4430_RM_L4PER_ELM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x005c)
+#define OMAP4430_PM_L4PER_GPIO2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0060)
+#define OMAP4430_RM_L4PER_GPIO2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0064)
+#define OMAP4430_PM_L4PER_GPIO3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0068)
+#define OMAP4430_RM_L4PER_GPIO3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x006c)
+#define OMAP4430_PM_L4PER_GPIO4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0070)
+#define OMAP4430_RM_L4PER_GPIO4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0074)
+#define OMAP4430_PM_L4PER_GPIO5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0078)
+#define OMAP4430_RM_L4PER_GPIO5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x007c)
+#define OMAP4430_PM_L4PER_GPIO6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0080)
+#define OMAP4430_RM_L4PER_GPIO6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0084)
+#define OMAP4430_RM_L4PER_HDQ1W_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x008c)
+#define OMAP4430_PM_L4PER_HECC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0090)
+#define OMAP4430_RM_L4PER_HECC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0094)
+#define OMAP4430_PM_L4PER_HECC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0098)
+#define OMAP4430_RM_L4PER_HECC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x009c)
+#define OMAP4430_PM_L4PER_I2C1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a0)
+#define OMAP4430_RM_L4PER_I2C1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a4)
+#define OMAP4430_PM_L4PER_I2C2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a8)
+#define OMAP4430_RM_L4PER_I2C2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ac)
+#define OMAP4430_PM_L4PER_I2C3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b0)
+#define OMAP4430_RM_L4PER_I2C3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b4)
+#define OMAP4430_PM_L4PER_I2C4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b8)
+#define OMAP4430_RM_L4PER_I2C4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00bc)
+#define OMAP4430_RM_L4PER_L4_PER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00c0)
+#define OMAP4430_PM_L4PER_MCASP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d0)
+#define OMAP4430_RM_L4PER_MCASP2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d4)
+#define OMAP4430_PM_L4PER_MCASP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d8)
+#define OMAP4430_RM_L4PER_MCASP3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00dc)
+#define OMAP4430_PM_L4PER_MCBSP4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e0)
+#define OMAP4430_RM_L4PER_MCBSP4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e4)
+#define OMAP4430_RM_L4PER_MGATE_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ec)
+#define OMAP4430_PM_L4PER_MCSPI1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f0)
+#define OMAP4430_RM_L4PER_MCSPI1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f4)
+#define OMAP4430_PM_L4PER_MCSPI2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f8)
+#define OMAP4430_RM_L4PER_MCSPI2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00fc)
+#define OMAP4430_PM_L4PER_MCSPI3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0100)
+#define OMAP4430_RM_L4PER_MCSPI3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0104)
+#define OMAP4430_PM_L4PER_MCSPI4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0108)
+#define OMAP4430_RM_L4PER_MCSPI4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x010c)
+#define OMAP4430_PM_L4PER_MMCSD3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0120)
+#define OMAP4430_RM_L4PER_MMCSD3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0124)
+#define OMAP4430_PM_L4PER_MMCSD4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0128)
+#define OMAP4430_RM_L4PER_MMCSD4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x012c)
+#define OMAP4430_RM_L4PER_MSPROHG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0134)
+#define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0138)
+#define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x013c)
+#define OMAP4430_PM_L4PER_UART1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0140)
+#define OMAP4430_RM_L4PER_UART1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0144)
+#define OMAP4430_PM_L4PER_UART2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0148)
+#define OMAP4430_RM_L4PER_UART2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x014c)
+#define OMAP4430_PM_L4PER_UART3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0150)
+#define OMAP4430_RM_L4PER_UART3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0154)
+#define OMAP4430_PM_L4PER_UART4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0158)
+#define OMAP4430_RM_L4PER_UART4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x015c)
+#define OMAP4430_PM_L4PER_MMCSD5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0160)
+#define OMAP4430_RM_L4PER_MMCSD5_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0164)
+#define OMAP4430_PM_L4PER_I2C5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0168)
+#define OMAP4430_RM_L4PER_I2C5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x016c)
+#define OMAP4430_RM_L4SEC_AES1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01a4)
+#define OMAP4430_RM_L4SEC_AES2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01ac)
+#define OMAP4430_RM_L4SEC_DES3DES_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01b4)
+#define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01bc)
+#define OMAP4430_RM_L4SEC_RNG_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01c4)
+#define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01cc)
+#define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01dc)
+
+/* PRM.CEFUSE_PRM register offsets */
+#define OMAP4430_PM_CEFUSE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0000)
+#define OMAP4430_PM_CEFUSE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0004)
+#define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0024)
+
+/* PRM.WKUP_PRM register offsets */
+#define OMAP4430_RM_WKUP_L4WKUP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0024)
+#define OMAP4430_RM_WKUP_WDT1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x002c)
+#define OMAP4430_PM_WKUP_WDT2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0030)
+#define OMAP4430_RM_WKUP_WDT2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0034)
+#define OMAP4430_PM_WKUP_GPIO1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0038)
+#define OMAP4430_RM_WKUP_GPIO1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x003c)
+#define OMAP4430_PM_WKUP_TIMER1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0040)
+#define OMAP4430_RM_WKUP_TIMER1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0044)
+#define OMAP4430_PM_WKUP_TIMER12_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0048)
+#define OMAP4430_RM_WKUP_TIMER12_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x004c)
+#define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0054)
+#define OMAP4430_PM_WKUP_USIM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0058)
+#define OMAP4430_RM_WKUP_USIM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x005c)
+#define OMAP4430_RM_WKUP_SARRAM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0064)
+#define OMAP4430_PM_WKUP_KEYBOARD_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0078)
+#define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x007c)
+#define OMAP4430_PM_WKUP_RTC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0080)
+#define OMAP4430_RM_WKUP_RTC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0084)
+
+/* PRM.WKUP_CM register offsets */
+#define OMAP4430_CM_WKUP_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0000)
+#define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0020)
+#define OMAP4430_CM_WKUP_WDT1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0028)
+#define OMAP4430_CM_WKUP_WDT2_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0030)
+#define OMAP4430_CM_WKUP_GPIO1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0038)
+#define OMAP4430_CM_WKUP_TIMER1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0040)
+#define OMAP4430_CM_WKUP_TIMER12_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0048)
+#define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0050)
+#define OMAP4430_CM_WKUP_USIM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0058)
+#define OMAP4430_CM_WKUP_SARRAM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0060)
+#define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0078)
+#define OMAP4430_CM_WKUP_RTC_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0080)
+#define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0088)
+
+/* PRM.EMU_PRM register offsets */
+#define OMAP4430_PM_EMU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0000)
+#define OMAP4430_PM_EMU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0004)
+#define OMAP4430_RM_EMU_DEBUGSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0024)
+
+/* PRM.EMU_CM register offsets */
+#define OMAP4430_CM_EMU_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0000)
+#define OMAP4430_CM_EMU_DYNAMICDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0008)
+#define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0020)
+
+/* PRM.DEVICE_PRM register offsets */
+#define OMAP4430_PRM_RSTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0000)
+#define OMAP4430_PRM_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0004)
+#define OMAP4430_PRM_RSTTIME				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0008)
+#define OMAP4430_PRM_CLKREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x000c)
+#define OMAP4430_PRM_VOLTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0010)
+#define OMAP4430_PRM_PWRREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0014)
+#define OMAP4430_PRM_PSCON_COUNT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0018)
+#define OMAP4430_PRM_IO_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x001c)
+#define OMAP4430_PRM_IO_PMCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0020)
+#define OMAP4430_PRM_VOLTSETUP_WARMRESET		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0024)
+#define OMAP4430_PRM_VOLTSETUP_CORE_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0028)
+#define OMAP4430_PRM_VOLTSETUP_MPU_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x002c)
+#define OMAP4430_PRM_VOLTSETUP_IVA_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0030)
+#define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0034)
+#define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0038)
+#define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x003c)
+#define OMAP4430_PRM_VP_CORE_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0040)
+#define OMAP4430_PRM_VP_CORE_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0044)
+#define OMAP4430_PRM_VP_CORE_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0048)
+#define OMAP4430_PRM_VP_CORE_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x004c)
+#define OMAP4430_PRM_VP_CORE_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0050)
+#define OMAP4430_PRM_VP_CORE_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0054)
+#define OMAP4430_PRM_VP_MPU_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0058)
+#define OMAP4430_PRM_VP_MPU_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x005c)
+#define OMAP4430_PRM_VP_MPU_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0060)
+#define OMAP4430_PRM_VP_MPU_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0064)
+#define OMAP4430_PRM_VP_MPU_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0068)
+#define OMAP4430_PRM_VP_MPU_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x006c)
+#define OMAP4430_PRM_VP_IVA_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0070)
+#define OMAP4430_PRM_VP_IVA_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0074)
+#define OMAP4430_PRM_VP_IVA_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0078)
+#define OMAP4430_PRM_VP_IVA_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x007c)
+#define OMAP4430_PRM_VP_IVA_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0080)
+#define OMAP4430_PRM_VP_IVA_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0084)
+#define OMAP4430_PRM_VC_SMPS_SA				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0088)
+#define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x008c)
+#define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0090)
+#define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0094)
+#define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0098)
+#define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x009c)
+#define OMAP4430_PRM_VC_VAL_BYPASS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a0)
+#define OMAP4430_PRM_VC_CFG_CHANNEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a4)
+#define OMAP4430_PRM_VC_CFG_I2C_MODE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a8)
+#define OMAP4430_PRM_VC_CFG_I2C_CLK			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ac)
+#define OMAP4430_PRM_SRAM_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b0)
+#define OMAP4430_PRM_SRAM_WKUP_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b4)
+#define OMAP4430_PRM_LDO_SRAM_CORE_SETUP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b8)
+#define OMAP4430_PRM_LDO_SRAM_CORE_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00bc)
+#define OMAP4430_PRM_LDO_SRAM_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c0)
+#define OMAP4430_PRM_LDO_SRAM_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c4)
+#define OMAP4430_PRM_LDO_SRAM_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c8)
+#define OMAP4430_PRM_LDO_SRAM_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00cc)
+#define OMAP4430_PRM_LDO_ABB_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d0)
+#define OMAP4430_PRM_LDO_ABB_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d4)
+#define OMAP4430_PRM_LDO_ABB_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d8)
+#define OMAP4430_PRM_LDO_ABB_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00dc)
+#define OMAP4430_PRM_LDO_BANDGAP_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0)
+#define OMAP4430_PRM_DEVICE_OFF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e4)
+#define OMAP4430_PRM_PHASE1_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e8)
+#define OMAP4430_PRM_PHASE2A_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ec)
+#define OMAP4430_PRM_PHASE2B_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f0)
+#define OMAP4430_PRM_MODEM_IF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f4)
+
+/* CHIRON_PRCM */
+
+
+/* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */
+#define OMAP4430_REVISION_PRCM				OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
+
+/* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */
+#define OMAP4430_CHIRON_PRCM_PRM_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
+
+/* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */
+#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU0_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
+
+/* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */
+#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU1_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
+#endif
diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
new file mode 100644
index 000000000000..8bfaf342a028
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
@@ -0,0 +1,51 @@
+/*
+ * SDRC register values for the Hynix H8MBX00U0MER-0EM
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
+#define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
+
+#include <plat/sdrc.h>
+
+/* Hynix H8MBX00U0MER-0EM */
+static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = {
+	[0] = {
+		.rate        = 200000000,
+		.actim_ctrla = 0xa2e1b4c6,
+		.actim_ctrlb = 0x0002131c,
+		.rfr_ctrl    = 0x0005e601,
+		.mr          = 0x00000032,
+	},
+	[1] = {
+		.rate        = 166000000,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr          = 0x00000032,
+	},
+	[2] = {
+		.rate        = 100000000,
+		.actim_ctrla = 0x51912284,
+		.actim_ctrlb = 0x0002120e,
+		.rfr_ctrl    = 0x0002d101,
+		.mr          = 0x00000022,
+	},
+	[3] = {
+		.rate        = 83000000,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr          = 0x00000022,
+	},
+	[4] = {
+		.rate        = 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
index 02e1c2d4705f..a391b4939f74 100644
--- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -14,7 +14,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
 #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 /* Micron MT46H32M32LF-6 */
 /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
index 3751d293cb1f..0e518a72831f 100644
--- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -14,7 +14,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 /* Qimonda HYB18M512160AF-6 */
 static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 9e3bd4fa7810..cbfbd142e946 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -23,13 +23,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/common.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
 
 #include "prm.h"
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "sdrc.h"
 
 static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
@@ -37,12 +37,38 @@ static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
 void __iomem *omap2_sdrc_base;
 void __iomem *omap2_sms_base;
 
+struct omap2_sms_regs {
+	u32	sms_sysconfig;
+};
+
+static struct omap2_sms_regs sms_context;
+
 /* SDRC_POWER register bits */
 #define SDRC_POWER_EXTCLKDIS_SHIFT		3
 #define SDRC_POWER_PWDENA_SHIFT			2
 #define SDRC_POWER_PAGEPOLICY_SHIFT		0
 
 /**
+ * omap2_sms_save_context - Save SMS registers
+ *
+ * Save SMS registers that need to be restored after off mode.
+ */
+void omap2_sms_save_context(void)
+{
+	sms_context.sms_sysconfig = sms_read_reg(SMS_SYSCONFIG);
+}
+
+/**
+ * omap2_sms_restore_context - Restore SMS registers
+ *
+ * Restore SMS registers that need to be Restored after off mode.
+ */
+void omap2_sms_restore_context(void)
+{
+	sms_write_reg(sms_context.sms_sysconfig, SMS_SYSCONFIG);
+}
+
+/**
  * omap2_sdrc_get_params - return SDRC register values for a given clock rate
  * @r: SDRC clock rate (in Hz)
  * @sdrc_cs0: chip select 0 ram timings **
@@ -132,4 +158,21 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 	l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
 		(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
 	sdrc_write_reg(l, SDRC_POWER);
+	omap2_sms_save_context();
+}
+
+void omap2_sms_write_rot_control(u32 val, unsigned ctx)
+{
+	sms_write_reg(val, SMS_ROT_CONTROL(ctx));
+}
+
+void omap2_sms_write_rot_size(u32 val, unsigned ctx)
+{
+	sms_write_reg(val, SMS_ROT_SIZE(ctx));
+}
+
+void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
+{
+	sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx));
 }
+
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 0837eda5f2b6..68f57bb67fc5 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -15,9 +15,12 @@
  */
 #undef DEBUG
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 #ifndef __ASSEMBLER__
+
+#include <linux/io.h>
+
 extern void __iomem *omap2_sdrc_base;
 extern void __iomem *omap2_sms_base;
 
@@ -48,9 +51,28 @@ static inline u32 sms_read_reg(u16 reg)
 	return __raw_readl(OMAP_SMS_REGADDR(reg));
 }
 #else
-#define OMAP242X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
-#define OMAP243X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
-#define OMAP34XX_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+#define OMAP242X_SDRC_REGADDR(reg)					\
+			OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
+#define OMAP243X_SDRC_REGADDR(reg)					\
+			OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
+#define OMAP34XX_SDRC_REGADDR(reg)					\
+			OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
 #endif	/* __ASSEMBLER__ */
 
+/* Minimum frequency that the SDRC DLL can lock at */
+#define MIN_SDRC_DLL_LOCK_FREQ		83000000
+
+/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
+#define SDRC_MPURATE_SCALE		8
+
+/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
+#define SDRC_MPURATE_BASE_SHIFT		9
+
+/*
+ * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
+ * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
+ */
+#define SDRC_MPURATE_LOOPS		96
+
+
 #endif
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index feaec7eaf6bd..0f4d27aef44d 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,13 +24,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/common.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
 
 #include "prm.h"
 #include "clock.h"
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "sdrc.h"
 
 /* Memory timing, DLL mode flags */
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 54dfeb5d5667..39b797bc14d6 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -24,15 +24,16 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/board.h>
-#include <mach/clock.h>
-#include <mach/control.h>
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/clock.h>
+#include <plat/control.h>
 
 #include "prm.h"
 #include "pm.h"
 #include "prm-regbits-34xx.h"
 
+#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV	0x52
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
 
 #define DEFAULT_TIMEOUT (5 * HZ)
@@ -73,7 +74,6 @@ static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data0[] = {
 	{
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= 72,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -87,7 +87,6 @@ static struct plat_serial8250_port serial_platform_data0[] = {
 
 static struct plat_serial8250_port serial_platform_data1[] = {
 	{
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -101,7 +100,6 @@ static struct plat_serial8250_port serial_platform_data1[] = {
 
 static struct plat_serial8250_port serial_platform_data2[] = {
 	{
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -116,7 +114,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 #ifdef CONFIG_ARCH_OMAP4
 static struct plat_serial8250_port serial_platform_data3[] = {
 	{
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
 		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -159,8 +156,6 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
 
-static int enable_off_mode; /* to be removed by full off-mode patches */
-
 static void omap_uart_save_context(struct omap_uart_state *uart)
 {
 	u16 lcr = 0;
@@ -539,7 +534,7 @@ static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
 #define DEV_CREATE_FILE(dev, attr)
 #endif /* CONFIG_PM */
 
-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
+static struct omap_uart_state omap_uart[] = {
 	{
 		.pdev = {
 			.name			= "serial8250",
@@ -578,6 +573,23 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 #endif
 };
 
+/*
+ * Override the default 8250 read handler: mem_serial_in()
+ * Empty RX fifo read causes an abort on omap3630 and omap4
+ * This function makes sure that an empty rx fifo is not read on these silicons
+ * (OMAP1/2/3430 are not affected)
+ */
+static unsigned int serial_in_override(struct uart_port *up, int offset)
+{
+	if (UART_RX == offset) {
+		unsigned int lsr;
+		lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR);
+		if (!(lsr & UART_LSR_DR))
+			return -EPERM;
+	}
+	return serial_read_reg(omap_uart[up->line].p, offset);
+}
+
 void __init omap_serial_early_init(void)
 {
 	int i;
@@ -589,12 +601,22 @@ void __init omap_serial_early_init(void)
 	 * if not needed.
 	 */
 
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+	for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
 		struct omap_uart_state *uart = &omap_uart[i];
 		struct platform_device *pdev = &uart->pdev;
 		struct device *dev = &pdev->dev;
 		struct plat_serial8250_port *p = dev->platform_data;
 
+		/*
+		 * Module 4KB + L4 interconnect 4KB
+		 * Static mapping, never released
+		 */
+		p->membase = ioremap(p->mapbase, SZ_8K);
+		if (!p->membase) {
+			printk(KERN_ERR "ioremap failed for uart%i\n", i + 1);
+			continue;
+		}
+
 		sprintf(name, "uart%d_ick", i+1);
 		uart->ick = clk_get(NULL, name);
 		if (IS_ERR(uart->ick)) {
@@ -627,24 +649,64 @@ void __init omap_serial_early_init(void)
 	}
 }
 
-void __init omap_serial_init(void)
+/**
+ * omap_serial_init_port() - initialize single serial port
+ * @port: serial port number (0-3)
+ *
+ * This function initialies serial driver for given @port only.
+ * Platforms can call this function instead of omap_serial_init()
+ * if they don't plan to use all available UARTs as serial ports.
+ *
+ * Don't mix calls to omap_serial_init_port() and omap_serial_init(),
+ * use only one of the two.
+ */
+void __init omap_serial_init_port(int port)
 {
-	int i;
+	struct omap_uart_state *uart;
+	struct platform_device *pdev;
+	struct device *dev;
 
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		struct omap_uart_state *uart = &omap_uart[i];
-		struct platform_device *pdev = &uart->pdev;
-		struct device *dev = &pdev->dev;
+	BUG_ON(port < 0);
+	BUG_ON(port >= ARRAY_SIZE(omap_uart));
 
-		omap_uart_reset(uart);
-		omap_uart_idle_init(uart);
+	uart = &omap_uart[port];
+	pdev = &uart->pdev;
+	dev = &pdev->dev;
 
-		if (WARN_ON(platform_device_register(pdev)))
-			continue;
-		if ((cpu_is_omap34xx() && uart->padconf) ||
-		    (uart->wk_en && uart->wk_mask)) {
-			device_init_wakeup(dev, true);
-			DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
-		}
+	omap_uart_reset(uart);
+	omap_uart_idle_init(uart);
+
+	if (WARN_ON(platform_device_register(pdev)))
+		return;
+
+	if ((cpu_is_omap34xx() && uart->padconf) ||
+	    (uart->wk_en && uart->wk_mask)) {
+		device_init_wakeup(dev, true);
+		DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
 	}
+
+		/* omap44xx: Never read empty UART fifo
+		 * omap3xxx: Never read empty UART fifo on UARTs
+		 * with IP rev >=0x52
+		 */
+		if (cpu_is_omap44xx())
+			uart->p->serial_in = serial_in_override;
+		else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
+				>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
+			uart->p->serial_in = serial_in_override;
+}
+
+/**
+ * omap_serial_init() - intialize all supported serial ports
+ *
+ * Initializes all available UARTs as serial ports. Platforms
+ * can call this function when they want to have default behaviour
+ * for serial ports (e.g initialize them all as serial ports).
+ */
+void __init omap_serial_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(omap_uart); i++)
+		omap_serial_init_port(i);
 }
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index 130aadbfa083..c7780cc8d919 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -29,7 +29,7 @@
 #include <asm/assembler.h>
 #include <mach/io.h>
 
-#include <mach/omap24xx.h>
+#include <plat/omap24xx.h>
 
 #include "sdrc.h"
 
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index e5e2553e79a6..15268f8b61de 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -27,22 +27,35 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <mach/control.h>
+#include <plat/control.h>
 
+#include "cm.h"
 #include "prm.h"
 #include "sdrc.h"
 
 #define PM_PREPWSTST_CORE_V	OMAP34XX_PRM_REGADDR(CORE_MOD, \
 				OMAP3430_PM_PREPWSTST)
+#define PM_PREPWSTST_CORE_P	0x48306AE8
 #define PM_PREPWSTST_MPU_V	OMAP34XX_PRM_REGADDR(MPU_MOD, \
 				OMAP3430_PM_PREPWSTST)
-#define PM_PWSTCTRL_MPU_P	OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+#define PM_PWSTCTRL_MPU_P	OMAP3430_PRM_BASE + MPU_MOD + PM_PWSTCTRL
+#define CM_IDLEST1_CORE_V	OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
+#define SRAM_BASE_P		0x40200000
+#define CONTROL_STAT		0x480022F0
 #define SCRATCHPAD_MEM_OFFS	0x310 /* Move this as correct place is
 				       * available */
-#define SCRATCHPAD_BASE_P	OMAP343X_CTRL_REGADDR(\
-				OMAP343X_CONTROL_MEM_WKUP +\
-				SCRATCHPAD_MEM_OFFS)
+#define SCRATCHPAD_BASE_P	(OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\
+						+ SCRATCHPAD_MEM_OFFS)
 #define SDRC_POWER_V		OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+#define SDRC_SYSCONFIG_P	(OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
+#define SDRC_MR_0_P		(OMAP343X_SDRC_BASE + SDRC_MR_0)
+#define SDRC_EMR2_0_P		(OMAP343X_SDRC_BASE + SDRC_EMR2_0)
+#define SDRC_MANUAL_0_P		(OMAP343X_SDRC_BASE + SDRC_MANUAL_0)
+#define SDRC_MR_1_P		(OMAP343X_SDRC_BASE + SDRC_MR_1)
+#define SDRC_EMR2_1_P		(OMAP343X_SDRC_BASE + SDRC_EMR2_1)
+#define SDRC_MANUAL_1_P		(OMAP343X_SDRC_BASE + SDRC_MANUAL_1)
+#define SDRC_DLLA_STATUS_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
+#define SDRC_DLLA_CTRL_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
 	.text
 /* Function call to get the restore pointer for resume from OFF */
@@ -51,7 +64,93 @@ ENTRY(get_restore_pointer)
 	adr	r0, restore
         ldmfd   sp!, {pc}     @ restore regs and return
 ENTRY(get_restore_pointer_sz)
-        .word   . - get_restore_pointer_sz
+        .word   . - get_restore_pointer
+
+	.text
+/* Function call to get the restore pointer for for ES3 to resume from OFF */
+ENTRY(get_es3_restore_pointer)
+	stmfd	sp!, {lr}	@ save registers on stack
+	adr	r0, restore_es3
+	ldmfd	sp!, {pc}	@ restore regs and return
+ENTRY(get_es3_restore_pointer_sz)
+	.word	. - get_es3_restore_pointer
+
+ENTRY(es3_sdrc_fix)
+	ldr	r4, sdrc_syscfg		@ get config addr
+	ldr	r5, [r4]		@ get value
+	tst	r5, #0x100		@ is part access blocked
+	it	eq
+	biceq	r5, r5, #0x100		@ clear bit if set
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_mr_0		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_emr2_0		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_manual_0	@ get config addr
+	mov	r5, #0x2		@ autorefresh command
+	str	r5, [r4]		@ kick off refreshes
+	ldr	r4, sdrc_mr_1		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_emr2_1		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_manual_1	@ get config addr
+	mov	r5, #0x2		@ autorefresh command
+	str	r5, [r4]		@ kick off refreshes
+	bx	lr
+sdrc_syscfg:
+	.word	SDRC_SYSCONFIG_P
+sdrc_mr_0:
+	.word	SDRC_MR_0_P
+sdrc_emr2_0:
+	.word	SDRC_EMR2_0_P
+sdrc_manual_0:
+	.word	SDRC_MANUAL_0_P
+sdrc_mr_1:
+	.word	SDRC_MR_1_P
+sdrc_emr2_1:
+	.word	SDRC_EMR2_1_P
+sdrc_manual_1:
+	.word	SDRC_MANUAL_1_P
+ENTRY(es3_sdrc_fix_sz)
+	.word	. - es3_sdrc_fix
+
+/* Function to call rom code to save secure ram context */
+ENTRY(save_secure_ram_context)
+	stmfd	sp!, {r1-r12, lr}	@ save registers on stack
+save_secure_ram_debug:
+	/* b save_secure_ram_debug */	@ enable to debug save code
+	adr	r3, api_params		@ r3 points to parameters
+	str	r0, [r3,#0x4]		@ r0 has sdram address
+	ldr	r12, high_mask
+	and	r3, r3, r12
+	ldr	r12, sram_phy_addr_mask
+	orr	r3, r3, r12
+	mov	r0, #25			@ set service ID for PPA
+	mov	r12, r0			@ copy secure service ID in r12
+	mov	r1, #0			@ set task id for ROM code in r1
+	mov	r2, #4			@ set some flags in r2, r6
+	mov	r6, #0xff
+	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
+	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
+	.word	0xE1600071		@ call SMI monitor (smi #1)
+	nop
+	nop
+	nop
+	nop
+	ldmfd	sp!, {r1-r12, pc}
+sram_phy_addr_mask:
+	.word	SRAM_BASE_P
+high_mask:
+	.word	0xffff
+api_params:
+	.word	0x4, 0x0, 0x0, 0x1, 0x1
+ENTRY(save_secure_ram_context_sz)
+	.word	. - save_secure_ram_context
+
 /*
  * Forces OMAP into idle state
  *
@@ -92,11 +191,29 @@ loop:
 	nop
 	nop
 	nop
-	bl i_dll_wait
+	bl wait_sdrc_ok
 
 	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+restore_es3:
+	/*b restore_es3*/		@ Enable to debug restore code
+	ldr	r5, pm_prepwstst_core_p
+	ldr	r4, [r5]
+	and	r4, r4, #0x3
+	cmp	r4, #0x0	@ Check if previous power state of CORE is OFF
+	bne	restore
+	adr	r0, es3_sdrc_fix
+	ldr	r1, sram_base
+	ldr	r2, es3_sdrc_fix_sz
+	mov	r2, r2, ror #2
+copy_to_sram:
+	ldmia	r0!, {r3}	@ val = *src
+	stmia	r1!, {r3}	@ *dst = val
+	subs	r2, r2, #0x1	@ num_words--
+	bne	copy_to_sram
+	ldr	r1, sram_base
+	blx	r1
 restore:
-	/* b restore*/ 	@ Enable to debug restore code
+	/* b restore*/  @ Enable to debug restore code
         /* Check what was the reason for mpu reset and store the reason in r9*/
         /* 1 - Only L1 and logic lost */
         /* 2 - Only L2 lost - In this case, we wont be here */
@@ -108,9 +225,44 @@ restore:
         moveq   r9, #0x3        @ MPU OFF => L1 and L2 lost
 	movne	r9, #0x1	@ Only L1 and L2 lost => avoid L2 invalidation
 	bne	logic_l1_restore
+	ldr	r0, control_stat
+	ldr	r1, [r0]
+	and	r1, #0x700
+	cmp	r1, #0x300
+	beq	l2_inv_gp
+	mov	r0, #40		@ set service ID for PPA
+	mov	r12, r0		@ copy secure Service ID in r12
+	mov	r1, #0		@ set task id for ROM code in r1
+	mov	r2, #4		@ set some flags in r2, r6
+	mov	r6, #0xff
+	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
+	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
+	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
+	.word	0xE1600071		@ call SMI monitor (smi #1)
+	/* Write to Aux control register to set some bits */
+	mov	r0, #42		@ set service ID for PPA
+	mov	r12, r0		@ copy secure Service ID in r12
+	mov	r1, #0		@ set task id for ROM code in r1
+	mov	r2, #4		@ set some flags in r2, r6
+	mov	r6, #0xff
+	adr	r3, write_aux_control_params	@ r3 points to parameters
+	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
+	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
+	.word	0xE1600071		@ call SMI monitor (smi #1)
+
+	b	logic_l1_restore
+l2_inv_api_params:
+	.word   0x1, 0x00
+write_aux_control_params:
+	.word   0x1, 0x72
+l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
 	mov r12, #0x1                         @ set up to invalide L2
-smi:    .word 0xE1600070                @ Call SMI monitor (smieq)
+smi:    .word 0xE1600070		@ Call SMI monitor (smieq)
+	/* Write to Aux control register to set some bits */
+	mov	r0, #0x72
+	mov	r12, #0x3
+	.word 0xE1600070	@ Call SMI monitor (smieq)
 logic_l1_restore:
 	mov	r1, #0
 	/* Invalidate all instruction caches to PoU
@@ -391,33 +543,55 @@ skip_l2_inval:
 	nop
 	nop
 	nop
-	bl i_dll_wait
+	bl wait_sdrc_ok
 	/* restore regs and return */
 	ldmfd   sp!, {r0-r12, pc}
 
-i_dll_wait:
-	ldr     r4, clk_stabilize_delay
+/* Make sure SDRC accesses are ok */
+wait_sdrc_ok:
+        ldr     r4, cm_idlest1_core
+        ldr     r5, [r4]
+        and     r5, r5, #0x2
+        cmp     r5, #0
+        bne     wait_sdrc_ok
+        ldr     r4, sdrc_power
+        ldr     r5, [r4]
+        bic     r5, r5, #0x40
+        str     r5, [r4]
+wait_dll_lock:
+        /* Is dll in lock mode? */
+        ldr     r4, sdrc_dlla_ctrl
+        ldr     r5, [r4]
+        tst     r5, #0x4
+        bxne    lr
+        /* wait till dll locks */
+        ldr     r4, sdrc_dlla_status
+        ldr     r5, [r4]
+        and     r5, r5, #0x4
+        cmp     r5, #0x4
+        bne     wait_dll_lock
+        bx      lr
 
-i_dll_delay:
-	subs    r4, r4, #0x1
-	bne     i_dll_delay
-	ldr     r4, sdrc_power
-	ldr     r5, [r4]
-	bic     r5, r5, #0x40
-	str     r5, [r4]
-	bx	lr
+cm_idlest1_core:
+	.word	CM_IDLEST1_CORE_V
+sdrc_dlla_status:
+	.word	SDRC_DLLA_STATUS_V
+sdrc_dlla_ctrl:
+	.word	SDRC_DLLA_CTRL_V
 pm_prepwstst_core:
 	.word	PM_PREPWSTST_CORE_V
+pm_prepwstst_core_p:
+	.word	PM_PREPWSTST_CORE_P
 pm_prepwstst_mpu:
 	.word	PM_PREPWSTST_MPU_V
 pm_pwstctrl_mpu:
 	.word	PM_PWSTCTRL_MPU_P
 scratchpad_base:
 	.word	SCRATCHPAD_BASE_P
+sram_base:
+	.word	SRAM_BASE_P + 0x8000
 sdrc_power:
 	.word SDRC_POWER_V
-context_mem:
-	.word	0x803E3E14
 clk_stabilize_delay:
 	.word 0x000001FF
 assoc_mask:
@@ -432,5 +606,7 @@ table_entry:
 	.word	0x00000C02
 cache_pred_disable_mask:
 	.word	0xFFFFE7FB
+control_stat:
+	.word	CONTROL_STAT
 ENTRY(omap34xx_cpu_suspend_sz)
 	.word	. - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 9b62208658bc..92e6e1a12af8 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl:
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_sdi_timer_32ksynct_cr:
-	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 ENTRY(omap242x_sram_ddr_init_sz)
 	.word	. - omap242x_sram_ddr_init
 
@@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_srs_timer_32ksynct:
-	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap242x_sram_reprogram_sdrc_sz)
 	.word	. - omap242x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index df2cd9277c00..ab4973695c71 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl:
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_sdi_timer_32ksynct_cr:
-	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 ENTRY(omap243x_sram_ddr_init_sz)
 	.word	. - omap243x_sram_ddr_init
 
@@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_srs_timer_32ksynct:
-	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap243x_sram_reprogram_sdrc_sz)
 	.word	. - omap243x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 82aa4a3d160c..de99ba2a57ab 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -91,8 +91,19 @@
  *  new SDRC_ACTIM_CTRL_B_1 register contents
  *  new SDRC_MR_1 register value
  *
- * If the param SDRC_RFR_CTRL_1 is 0, the parameters
- *  are not programmed into the SDRC CS1 registers
+ * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into
+ * the SDRC CS1 registers
+ *
+ * NOTE: This code no longer attempts to program the SDRC AC timing and MR
+ * registers.  This is because the code currently cannot ensure that all
+ * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the
+ * SDRAM when the registers are written.  If the registers are changed while
+ * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC
+ * may enter an unpredictable state.  In the future, the intent is to
+ * re-enable this code in cases where we can ensure that no initiators are
+ * touching the SDRAM.  Until that time, users who know that their use case
+ * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING
+ * option.
  */
 ENTRY(omap3_sram_configure_core_dpll)
 	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
@@ -219,6 +230,7 @@ configure_sdrc:
 	ldr	r12, omap_sdrc_rfr_ctrl_0_val	@ fetch value from SRAM
 	ldr	r11, omap3_sdrc_rfr_ctrl_0	@ fetch addr from SRAM
 	str	r12, [r11]			@ store
+#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
 	ldr	r12, omap_sdrc_actim_ctrl_a_0_val
 	ldr	r11, omap3_sdrc_actim_ctrl_a_0
 	str	r12, [r11]
@@ -228,11 +240,13 @@ configure_sdrc:
 	ldr	r12, omap_sdrc_mr_0_val
 	ldr	r11, omap3_sdrc_mr_0
 	str	r12, [r11]
+#endif
 	ldr	r12, omap_sdrc_rfr_ctrl_1_val
 	cmp	r12, #0			@ if SDRC_RFR_CTRL_1 is 0,
 	beq	skip_cs1_prog		@  do not program cs1 params
 	ldr	r11, omap3_sdrc_rfr_ctrl_1
 	str	r12, [r11]
+#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
 	ldr	r12, omap_sdrc_actim_ctrl_a_1_val
 	ldr	r11, omap3_sdrc_actim_ctrl_a_1
 	str	r12, [r11]
@@ -242,6 +256,7 @@ configure_sdrc:
 	ldr	r12, omap_sdrc_mr_1_val
 	ldr	r11, omap3_sdrc_mr_1
 	str	r12, [r11]
+#endif
 skip_cs1_prog:
 	ldr	r12, [r11]		@ posted-write barrier for SDRC
 	bx	lr
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index e2338c0aebcf..cd04deaa88c5 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -37,7 +37,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <mach/dmtimer.h>
+#include <plat/dmtimer.h>
 #include <asm/localtimer.h>
 
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
@@ -47,6 +47,7 @@ static struct omap_dm_timer *gptimer;
 static struct clock_event_device clockevent_gpt;
 static u8 __initdata gptimer_id = 1;
 static u8 __initdata inited;
+struct omap_dm_timer *gptimer_wakeup;
 
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
@@ -134,6 +135,7 @@ static void __init omap2_gp_clockevent_init(void)
 
 	gptimer = omap_dm_timer_request_specific(gptimer_id);
 	BUG_ON(gptimer == NULL);
+	gptimer_wakeup = gptimer;
 
 #if defined(CONFIG_OMAP_32K_TIMER)
 	src = OMAP_TIMER_SRC_32_KHZ;
@@ -231,7 +233,8 @@ static void __init omap2_gp_clocksource_init(void)
 static void __init omap2_gp_timer_init(void)
 {
 #ifdef CONFIG_LOCAL_TIMERS
-	twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+	twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
+	BUG_ON(!twd_base);
 #endif
 	omap_dm_timer_init();
 
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
new file mode 100644
index 000000000000..f1df873d59db
--- /dev/null
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -0,0 +1,238 @@
+/*
+ * linux/arch/arm/mach-omap2/usb-ehci.c
+ *
+ * This file will contain the board specific details for the
+ * Synopsys EHCI host controller on OMAP3430
+ *
+ * Copyright (C) 2007 Texas Instruments
+ * Author: Vikram Pandita <vikram.pandita@ti.com>
+ *
+ * Generalization by:
+ * Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <asm/io.h>
+#include <plat/mux.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <plat/usb.h>
+
+#include "mux.h"
+
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+
+static struct resource ehci_resources[] = {
+	{
+		.start	= OMAP34XX_EHCI_BASE,
+		.end	= OMAP34XX_EHCI_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_UHH_CONFIG_BASE,
+		.end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_USBTLL_BASE,
+		.end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{         /* general IRQ */
+		.start   = INT_34XX_EHCI_IRQ,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+static u64 ehci_dmamask = ~(u32)0;
+static struct platform_device ehci_device = {
+	.name           = "ehci-omap",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = &ehci_dmamask,
+		.coherent_dma_mask      = 0xffffffff,
+		.platform_data          = NULL,
+	},
+	.num_resources  = ARRAY_SIZE(ehci_resources),
+	.resource       = ehci_resources,
+};
+
+/* MUX settings for EHCI pins */
+/*
+ * setup_ehci_io_mux - initialize IO pad mux for USBHOST
+ */
+static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
+{
+	switch (port_mode[0]) {
+	case EHCI_HCD_OMAP_MODE_PHY:
+		omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
+		omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
+		omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case EHCI_HCD_OMAP_MODE_TLL:
+		omap_mux_init_signal("hsusb1_tll_stp",
+			OMAP_PIN_INPUT_PULLUP);
+		omap_mux_init_signal("hsusb1_tll_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data7",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+
+	switch (port_mode[1]) {
+	case EHCI_HCD_OMAP_MODE_PHY:
+		omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
+		omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
+		omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data7",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case EHCI_HCD_OMAP_MODE_TLL:
+		omap_mux_init_signal("hsusb2_tll_stp",
+			OMAP_PIN_INPUT_PULLUP);
+		omap_mux_init_signal("hsusb2_tll_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data7",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+
+	switch (port_mode[2]) {
+	case EHCI_HCD_OMAP_MODE_PHY:
+		printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
+		break;
+	case EHCI_HCD_OMAP_MODE_TLL:
+		omap_mux_init_signal("hsusb3_tll_stp",
+			OMAP_PIN_INPUT_PULLUP);
+		omap_mux_init_signal("hsusb3_tll_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data7",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+
+	return;
+}
+
+void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
+{
+	platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
+
+	/* Setup Pin IO MUX for EHCI */
+	if (cpu_is_omap34xx())
+		setup_ehci_io_mux(pdata->port_mode);
+
+	if (platform_device_register(&ehci_device) < 0) {
+		printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
+		return;
+	}
+}
+
+#else
+
+void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
+
+{
+}
+
+#endif /* CONFIG_USB_EHCI_HCD */
+
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 1145a2562b0f..a80441dd19b8 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,8 +28,8 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
 
 #ifdef CONFIG_USB_MUSB_SOC
 
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 8622c24cd270..10a2013c1104 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -16,8 +16,8 @@
 
 #include <linux/usb/musb.h>
 
-#include <mach/gpmc.h>
-#include <mach/mux.h>
+#include <plat/gpmc.h>
+#include <plat/mux.h>
 
 
 static u8		async_cs, sync_cs;
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 36dc5413cc97..bdf96eb523bc 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -463,7 +463,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
 	writel(win_enable, PCI_BAR_ENABLE);
 
 	/*
-	 * Disable automatic update of address remaping when writing to BARs.
+	 * Disable automatic update of address remapping when writing to BARs.
 	 */
 	orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1);
 }
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a6f8eab14ba5..d89c6adbe8bc 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -2,34 +2,105 @@ if ARCH_PXA
 
 menu "Intel PXA2xx/PXA3xx Implementations"
 
-if PXA3xx
+comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
-menu "Supported PXA3xx Processor Variants"
+config ARCH_LUBBOCK
+	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+	select PXA25x
+	select SA1111
+	select PXA_HAVE_BOARD_IRQS
 
-config CPU_PXA300
-	bool "PXA300 (codename Monahans-L)"
+config MACH_MAINSTONE
+	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
-config CPU_PXA310
-	bool "PXA310 (codename Monahans-LV)"
+config MACH_ZYLONITE
+	bool
+	select PXA3xx
+	select PXA_SSP
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_ZYLONITE300
+	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
 	select CPU_PXA300
+	select CPU_PXA310
+	select MACH_ZYLONITE
 
-config CPU_PXA320
-	bool "PXA320 (codename Monahans-P)"
+config MACH_ZYLONITE320
+	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
+	select CPU_PXA320
+	select MACH_ZYLONITE
 
-config CPU_PXA930
-	bool "PXA930 (codename Tavor-P)"
+config MACH_LITTLETON
+	bool "PXA3xx Form Factor Platform (aka Littleton)"
+	select PXA3xx
+	select PXA_SSP
 
-config CPU_PXA935
-	bool "PXA935 (codename Tavor-P65)"
+config MACH_TAVOREVB
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select PXA3xx
 	select CPU_PXA930
 
-config CPU_PXA950
-	bool "PXA950 (codename Tavor-PV2)"
+config MACH_SAAR
+	bool "PXA930 Handheld Platform (aka SAAR)"
+	select PXA3xx
 	select CPU_PXA930
 
-endmenu
+comment "Third Party Dev Platforms (sorted by vendor name)"
 
-endif
+config ARCH_PXA_IDP
+	bool "Accelent Xscale IDP"
+	select PXA25x
+
+config ARCH_VIPER
+	bool "Arcom/Eurotech VIPER SBC"
+	select PXA25x
+	select ISA
+	select I2C_GPIO
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+	select PXA_HAVE_ISA_IRQS
+
+config MACH_BALLOON3
+	bool "Balloon 3 board"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_CSB726
+	bool "Enable Cogent CSB726 System On a Module"
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Cogent
+	  CSB726 System On Module.
+
+config CSB726_CSB701
+	bool "Enable support for CSB701 baseboard"
+	depends on MACH_CSB726
+
+config MACH_ARMCORE
+	bool "CompuLab CM-X255/CM-X270 modules"
+	select PXA27x
+	select IWMMXT
+	select PXA25x
+	select PXA_SSP
+
+config MACH_EM_X270
+	bool "CompuLab EM-x270 platform"
+	select PXA27x
+
+config MACH_EXEDA
+	bool "CompuLab eXeda platform"
+	select PXA27x
+
+config MACH_CM_X300
+	bool "CompuLab CM-X300 modules"
+	select PXA3xx
+	select CPU_PXA300
 
 config ARCH_GUMSTIX
 	bool "Gumstix XScale 255 boards"
@@ -62,185 +133,24 @@ config MACH_STARGATE2
 	select IWMMXT
 	select PXA_HAVE_BOARD_IRQS
 
-config ARCH_LUBBOCK
-	bool "Intel DBPXA250 Development Platform"
-	select PXA25x
-	select SA1111
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_LOGICPD_PXA270
-	bool "LogicPD PXA270 Card Engine Development Platform"
-	select PXA27x
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_MAINSTONE
-	bool "Intel HCDDBBVA0 Development Platform"
-	select PXA27x
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_MP900C
-	bool "Nec Mobilepro 900/c"
-	select PXA25x
-
-config MACH_BALLOON3
-	bool "Balloon 3 board"
-	select PXA27x
-	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
-
-config ARCH_PXA_IDP
-	bool "Accelent Xscale IDP"
-	select PXA25x
-
-config PXA_SHARPSL
-	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
-	select SHARP_SCOOP
-	select SHARP_PARAM
-	help
-	  Say Y here if you intend to run this kernel on a
-	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
-	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
-	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
-	  handheld computer.
-
-config SHARPSL_PM
-	bool
-	select APM_EMULATION
-
-config CORGI_SSP_DEPRECATED
-	bool
-	select PXA_SSP
-	help
-	  This option will include corgi_ssp.c and corgi_lcd.c
-	  that corgi_ts.c and other legacy drivers (corgi_bl.c
-	  and sharpsl_pm.c) may depend on.
-
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL
+config MACH_XCEP
+	bool "Iskratel Electronics XCEP"
 	select PXA25x
-	select SHARP_LOCOMO
+	select MTD
+	select MTD_PARTITIONS
+	select MTD_PHYSMAP
+	select MTD_CFI_INTELEXT
+	select MTD_CFI
+	select MTD_CHAR
+	select SMC91X
 	select PXA_SSP
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_AKITA
-	bool "Enable Sharp SL-1000 (Akita) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
-	select I2C
-	select I2C_PXA
-
-config MACH_SPITZ
-	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
-	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_HAVE_BOARD_IRQS
-
-config ARCH_VIPER
-	bool "Arcom/Eurotech VIPER SBC"
-	select PXA25x
-	select ISA
-	select I2C_GPIO
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-	select PXA_HAVE_ISA_IRQS
-
-config ARCH_PXA_ESERIES
-	bool "PXA based Toshiba e-series PDAs"
-	select PXA25x
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_E330
-	bool "Toshiba e330"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e330 family PDA.
-
-config MACH_E350
-	bool "Toshiba e350"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e350 family PDA.
-
-config MACH_E740
-	bool "Toshiba e740"
-	default y
-	depends on ARCH_PXA_ESERIES
-	select FB_W100
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e740 family PDA.
-
-config MACH_E750
-	bool "Toshiba e750"
-	default y
-	depends on ARCH_PXA_ESERIES
-	select FB_W100
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e750 family PDA.
-
-config MACH_E400
-	bool "Toshiba e400"
-	default y
-	depends on ARCH_PXA_ESERIES
 	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e400 family PDA.
-
-config MACH_E800
-	bool "Toshiba e800"
-	default y
-	depends on ARCH_PXA_ESERIES
-	select FB_W100
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e800 family PDA.
+	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+	  Tuned for usage in Libera instruments for particle accelerators.
 
 config TRIZEPS_PXA
 	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 
-config MACH_H5000
-	bool "HP iPAQ h5000"
-	select PXA25x
-
 config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
 	depends on TRIZEPS_PXA
@@ -274,13 +184,38 @@ config TRIZEPS_PCMCIA
 	help
 	  Enable PCMCIA support for Trizeps modules
 
-config MACH_EM_X270
-	bool "CompuLab EM-x270 platform"
+config MACH_LOGICPD_PXA270
+	bool "LogicPD PXA270 Card Engine Development Platform"
 	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
-config MACH_EXEDA
-	bool "CompuLab eXeda platform"
+config MACH_PCM027
+	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
+	select IWMMXT
+	select PXA_SSP
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_PCM990_BASEBOARD
+	bool "PHYTEC PCM-990 development board"
+	select HAVE_PWM
+	depends on MACH_PCM027
+
+choice
+	prompt "display on pcm990"
+	depends on MACH_PCM990_BASEBOARD
+
+config PCM990_DISPLAY_SHARP
+	bool "sharp lq084v1dg21 stn display"
+
+config PCM990_DISPLAY_NEC
+	bool "nec nl6448bc20_18d tft display"
+
+config PCM990_DISPLAY_NONE
+	bool "no display"
+
+endchoice
 
 config MACH_COLIBRI
 	bool "Toradex Colibri PXA270"
@@ -290,45 +225,15 @@ config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
 	select PXA3xx
 	select CPU_PXA300
+	select CPU_PXA310
+	select HAVE_PWM
 
 config MACH_COLIBRI320
 	bool "Toradex Colibri PXA320"
 	select PXA3xx
 	select CPU_PXA320
 
-config MACH_ZYLONITE
-	bool "PXA3xx Development Platform (aka Zylonite)"
-	select PXA3xx
-	select PXA_SSP
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_LITTLETON
-	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	select PXA3xx
-	select PXA_SSP
-
-config MACH_TAVOREVB
-	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	select PXA3xx
-	select CPU_PXA930
-
-config MACH_SAAR
-	bool "PXA930 Handheld Platform (aka SAAR)"
-	select PXA3xx
-	select CPU_PXA930
-
-config MACH_ARMCORE
-	bool "CompuLab CM-X255/CM-X270 modules"
-	select PXA27x
-	select IWMMXT
-	select PXA25x
-	select PXA_SSP
-
-config MACH_CM_X300
-	bool "CompuLab CM-X300 modules"
-	select PXA3xx
-	select CPU_PXA300
+comment "End-user Products (sorted by vendor name)"
 
 config MACH_H4700
 	bool "HP iPAQ hx4700"
@@ -338,6 +243,15 @@ config MACH_H4700
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_H5000
+	bool "HP iPAQ h5000"
+	select PXA25x
+
+config MACH_HIMALAYA
+	bool "HTC Himalaya Support"
+	select CPU_PXA26x
+	select FB_W100
+
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
@@ -346,11 +260,6 @@ config MACH_MAGICIAN
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
-config MACH_HIMALAYA
-	bool "HTC Himalaya Support"
-	select CPU_PXA26x
-	select FB_W100
-
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
 	select PXA27x
@@ -362,13 +271,47 @@ config MACH_MIOA701
 	  MIO A701. Currently there is only basic support
 	  for this PDA.
 
-config MACH_PCM027
-	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+config PXA_EZX
+	bool "Motorola EZX Platform"
 	select PXA27x
 	select IWMMXT
-	select PXA_SSP
+	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_EZX_A780
+	bool "Motorola EZX A780"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E680
+	bool "Motorola EZX E680"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A1200
+	bool "Motorola EZX A1200"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A910
+	bool "Motorola EZX A910"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E6
+	bool "Motorola EZX E6"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E2
+	bool "Motorola EZX E2"
+	default y
+	depends on PXA_EZX
+
+config MACH_MP900C
+	bool "Nec Mobilepro 900/c"
+	select PXA25x
+
 config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
 	select HAVE_PWM
@@ -421,109 +364,172 @@ config MACH_PALMZ72
 	  Say Y here if you intend to run this kernel on Palm Zire 72
 	  handheld computer.
 
-config MACH_TREO680
-	bool "Palm Treo 680"
+config MACH_PALMLD
+	bool "Palm LifeDrive"
 	default y
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
 	help
-	  Say Y here if you intend to run this kernel on Palm Treo 680
+	  Say Y here if you intend to run this kernel on a Palm LifeDrive
+	  handheld computer.
+
+config PALM_TREO
+	bool
+	depends on ARCH_PXA_PALM
+
+config MACH_CENTRO
+	bool "Palm Centro 685 (GSM)"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	select PALM_TREO
+	help
+	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
 	  smartphone.
 
-config MACH_PALMLD
-	bool "Palm LifeDrive"
+config MACH_TREO680
+	bool "Palm Treo 680"
 	default y
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select PALM_TREO
 	help
-	  Say Y here if you intend to run this kernel on a Palm LifeDrive
+	  Say Y here if you intend to run this kernel on Palm Treo 680
+	  smartphone.
+
+config PXA_SHARPSL
+	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
+	select SHARP_SCOOP
+	select SHARP_PARAM
+	help
+	  Say Y here if you intend to run this kernel on a
+	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
+	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
+	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
-config MACH_PCM990_BASEBOARD
-	bool "PHYTEC PCM-990 development board"
-	select HAVE_PWM
-	depends on MACH_PCM027
+config SHARPSL_PM
+	bool
+	select APM_EMULATION
 
-choice
-	prompt "display on pcm990"
-	depends on MACH_PCM990_BASEBOARD
+config CORGI_SSP_DEPRECATED
+	bool
+	select PXA_SSP
+	help
+	  This option will include corgi_ssp.c and corgi_lcd.c
+	  that corgi_ts.c and other legacy drivers (corgi_bl.c
+	  and sharpsl_pm.c) may depend on.
 
-config PCM990_DISPLAY_SHARP
-	bool "sharp lq084v1dg21 stn display"
+config MACH_POODLE
+	bool "Enable Sharp SL-5600 (Poodle) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select SHARP_LOCOMO
+	select PXA_SSP
 
-config PCM990_DISPLAY_NEC
-	bool "nec nl6448bc20_18d tft display"
+config MACH_CORGI
+	bool "Enable Sharp SL-C700 (Corgi) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
 
-config PCM990_DISPLAY_NONE
-	bool "no display"
+config MACH_SHEPHERD
+	bool "Enable Sharp SL-C750 (Shepherd) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
 
-endchoice
+config MACH_HUSKY
+	bool "Enable Sharp SL-C760 (Husky) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
 
-config MACH_CSB726
-	bool "Enable Cogent CSB726 System On a Module"
+config MACH_AKITA
+	bool "Enable Sharp SL-1000 (Akita) Support"
+	depends on PXA_SHARPSL
 	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on a Cogent
-	  CSB726 System On Module.
+	select PXA_SHARP_Cxx00
+	select MACH_SPITZ
+	select I2C
+	select I2C_PXA
 
-config CSB726_CSB701
-	bool "Enable supprot for CSB701 baseboard"
-	depends on MACH_CSB726
+config MACH_SPITZ
+	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
 
-config PXA_EZX
-	bool "Motorola EZX Platform"
+config MACH_BORZOI
+	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+	depends on PXA_SHARPSL
 	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
+	select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
 	select PXA_HAVE_BOARD_IRQS
 
-config MACH_EZX_A780
-	bool "Motorola EZX A780"
-	default y
-	depends on PXA_EZX
+config ARCH_PXA_ESERIES
+	bool "PXA based Toshiba e-series PDAs"
+	select PXA25x
+	select PXA_HAVE_BOARD_IRQS
 
-config MACH_EZX_E680
-	bool "Motorola EZX E680"
+config MACH_E330
+	bool "Toshiba e330"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e330 family PDA.
 
-config MACH_EZX_A1200
-	bool "Motorola EZX A1200"
+config MACH_E350
+	bool "Toshiba e350"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e350 family PDA.
 
-config MACH_EZX_A910
-	bool "Motorola EZX A910"
+config MACH_E740
+	bool "Toshiba e740"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	select FB_W100
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e740 family PDA.
 
-config MACH_EZX_E6
-	bool "Motorola EZX E6"
+config MACH_E750
+	bool "Toshiba e750"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	select FB_W100
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e750 family PDA.
 
-config MACH_EZX_E2
-	bool "Motorola EZX E2"
+config MACH_E400
+	bool "Toshiba e400"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e400 family PDA.
 
-config MACH_XCEP
-	bool "Iskratel Electronics XCEP"
-	select PXA25x
-	select MTD
-	select MTD_PARTITIONS
-	select MTD_PHYSMAP
-	select MTD_CFI_INTELEXT
-	select MTD_CFI
-	select MTD_CHAR
-	select SMC91X
-	select PXA_SSP
+config MACH_E800
+	bool "Toshiba e800"
+	default y
+	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
-	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
-	  Tuned for usage in Libera instruments for particle accelerators.
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e800 family PDA.
 
 endmenu
 
@@ -551,6 +557,42 @@ config PXA3xx
 	help
 	  Select code specific to PXA3xx variants
 
+config CPU_PXA300
+	bool
+	select PXA3xx
+	help
+	  PXA300 (codename Monahans-L)
+
+config CPU_PXA310
+	bool
+	select CPU_PXA300
+	help
+	  PXA310 (codename Monahans-LV)
+
+config CPU_PXA320
+	bool
+	select PXA3xx
+	help
+	  PXA320 (codename Monahans-P)
+
+config CPU_PXA930
+	bool
+	select PXA3xx
+	help
+	  PXA930 (codename Tavor-P)
+
+config CPU_PXA935
+	bool
+	select CPU_PXA930
+	help
+	  PXA935 (codename Tavor-P65)
+
+config CPU_PXA950
+	bool
+	select CPU_PXA930
+	help
+	  PXA950 (codename Tavor-PV2)
+
 config PXA_SHARP_C7xx
 	bool
 	select PXA_SSP
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f10e152bfc27..b5d29e60a341 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -24,33 +24,63 @@ obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
-# Specific board support
-obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
-obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
-obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
+# NOTE: keep the order of boards in accordance to their order in Kconfig
+
+# Intel/Marvell Dev Platforms
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
-obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
-obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
-obj-$(CONFIG_MACH_MP900C)	+= mp900.o
+obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
+obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
+obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_SAAR)		+= saar.o
+
+# 3rd Party Dev Platforms
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
+obj-$(CONFIG_ARCH_VIPER)	+= viper.o
+obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
+obj-$(CONFIG_MACH_CSB726)	+= csb726.o
+obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
+obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
+ifeq ($(CONFIG_PCI),y)
+obj-$(CONFIG_MACH_ARMCORE)	+= cm-x2xx-pci.o
+endif
+obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
+obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
+obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
+obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
+obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
+obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
+obj-$(CONFIG_MACH_XCEP)         += xcep.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
+obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
+obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
+obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
+
+# End-user Products
+obj-$(CONFIG_MACH_H4700)	+= hx4700.o
 obj-$(CONFIG_MACH_H5000)	+= h5000.o
+obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
+obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
+obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
+obj-$(CONFIG_MACH_MP900C)	+= mp900.o
+obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
+obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
+obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
+obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
+obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
+obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
+obj-$(CONFIG_PALM_TREO)		+= palmtreo.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
-obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
-obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
-obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
-obj-$(CONFIG_MACH_H4700)	+= hx4700.o
-obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
-obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
 obj-$(CONFIG_MACH_E330)		+= e330.o
 obj-$(CONFIG_MACH_E350)		+= e350.o
@@ -58,34 +88,6 @@ obj-$(CONFIG_MACH_E740)		+= e740.o
 obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
-obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
-obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
-obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
-obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
-obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
-obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
-obj-$(CONFIG_MACH_TREO680)	+= treo680.o
-obj-$(CONFIG_ARCH_VIPER)	+= viper.o
-
-ifeq ($(CONFIG_MACH_ZYLONITE),y)
-  obj-y				+= zylonite.o
-  obj-$(CONFIG_CPU_PXA300)	+= zylonite_pxa300.o
-  obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
-endif
-obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
-obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_SAAR)		+= saar.o
-
-obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
-obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
-obj-$(CONFIG_PXA_EZX)           += ezx.o
-
-obj-$(CONFIG_MACH_XCEP)         += xcep.o
-
-obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
-obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
-obj-$(CONFIG_MACH_CSB726)	+= csb726.o
-obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
 
 # Support for blinky lights
 led-y := leds.o
@@ -95,8 +97,4 @@ led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
 
 obj-$(CONFIG_LEDS)		+= $(led-y)
 
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
-endif
-
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index f23138b8fca3..b8cd07ca9380 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -306,6 +306,10 @@ static void __init balloon3_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
 		pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index b50ef39eabfc..bff6e78f033d 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -453,6 +453,10 @@ static inline void cmx2xx_init_ac97(void) {}
 
 static void __init cmx2xx_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	cmx2xx_pm_init();
 
 	if (cpu_is_pxa25x())
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 102916f1e465..d37cfa132a65 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -3,9 +3,10 @@
  *
  * Support for the CompuLab CM-X300 modules
  *
- * Copyright (C) 2008 CompuLab Ltd.
+ * Copyright (C) 2008,2009 CompuLab Ltd.
  *
  * Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,30 +17,41 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/leds.h>
 #include <linux/rtc-v3020.h>
+#include <linux/pwm_backlight.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 
+#include <linux/mfd/da903x.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/tdo24m.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/setup.h>
 
 #include <mach/pxa300.h>
+#include <mach/pxa27x-udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <plat/i2c.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
+#include <mach/audio.h>
 
 #include <asm/mach/map.h>
 
 #include "generic.h"
+#include "devices.h"
 
 #define CM_X300_ETH_PHYS	0x08000010
 
@@ -53,7 +65,7 @@
 #define GPIO97_RTC_RD		(97)
 #define GPIO98_RTC_IO		(98)
 
-static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
+static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
 	/* LCD */
 	GPIO54_LCD_LDD_0,
 	GPIO55_LCD_LDD_1,
@@ -137,7 +149,6 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	GPIO36_UART1_DTR,
 
 	/* GPIOs */
-	GPIO79_GPIO,			/* LED */
 	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
 	GPIO85_GPIO,			/* MMC WP */
 	GPIO99_GPIO,			/* Ethernet IRQ */
@@ -151,6 +162,50 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
 	GPIO22_I2C_SDA,
+
+	/* PWM Backlight */
+	GPIO19_PWM2_OUT,
+};
+
+static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
+	/* GPIOs */
+	GPIO79_GPIO,			/* LED */
+	GPIO77_GPIO,			/* WiFi reset */
+	GPIO78_GPIO,			/* BT reset */
+};
+
+static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
+	/* GPIOs */
+	GPIO76_GPIO,			/* LED */
+	GPIO71_GPIO,			/* WiFi reset */
+	GPIO70_GPIO,			/* BT reset */
+};
+
+static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
+	/* USB PORT 2 */
+	ULPI_STP,
+	ULPI_NXT,
+	ULPI_DIR,
+	GPIO30_ULPI_DATA_OUT_0,
+	GPIO31_ULPI_DATA_OUT_1,
+	GPIO32_ULPI_DATA_OUT_2,
+	GPIO33_ULPI_DATA_OUT_3,
+	GPIO34_ULPI_DATA_OUT_4,
+	GPIO35_ULPI_DATA_OUT_5,
+	GPIO36_ULPI_DATA_OUT_6,
+	GPIO37_ULPI_DATA_OUT_7,
+	GPIO38_ULPI_CLK,
+	/* external PHY reset pin */
+	GPIO127_GPIO,
+
+	/* USB PORT 3 */
+	GPIO77_USB_P3_1,
+	GPIO78_USB_P3_2,
+	GPIO79_USB_P3_3,
+	GPIO80_USB_P3_4,
+	GPIO81_USB_P3_5,
+	GPIO82_USB_P3_6,
+	GPIO0_2_USBH_PEN,
 };
 
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
@@ -195,17 +250,18 @@ static void __init cm_x300_init_dm9000(void)
 static inline void cm_x300_init_dm9000(void) {}
 #endif
 
+/* LCD */
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info cm_x300_lcd_modes[] = {
 	[0] = {
-		.pixclock	= 38000,
+		.pixclock	= 38250,
 		.bpp		= 16,
 		.xres		= 480,
 		.yres		= 640,
 		.hsync_len	= 8,
 		.vsync_len	= 2,
 		.left_margin	= 8,
-		.upper_margin	= 0,
+		.upper_margin	= 2,
 		.right_margin	= 24,
 		.lower_margin	= 4,
 		.cmap_greyscale	= 0,
@@ -227,7 +283,7 @@ static struct pxafb_mode_info cm_x300_lcd_modes[] = {
 
 static struct pxafb_mach_info cm_x300_lcd = {
 	.modes			= cm_x300_lcd_modes,
-	.num_modes		= 2,
+	.num_modes		= ARRAY_SIZE(cm_x300_lcd_modes),
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
@@ -239,6 +295,87 @@ static void __init cm_x300_init_lcd(void)
 static inline void cm_x300_init_lcd(void) {}
 #endif
 
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct platform_pwm_backlight_data cm_x300_backlight_data = {
+	.pwm_id		= 2,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	.pwm_period_ns	= 10000,
+};
+
+static struct platform_device cm_x300_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent = &pxa27x_device_pwm0.dev,
+		.platform_data	= &cm_x300_backlight_data,
+	},
+};
+
+static void cm_x300_init_bl(void)
+{
+	platform_device_register(&cm_x300_backlight_device);
+}
+#else
+static inline void cm_x300_init_bl(void) {}
+#endif
+
+#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
+#define GPIO_LCD_BASE	(144)
+#define GPIO_LCD_DIN	(GPIO_LCD_BASE + 8)	/* aux_gpio3_0 */
+#define GPIO_LCD_DOUT	(GPIO_LCD_BASE + 9)	/* aux_gpio3_1 */
+#define GPIO_LCD_SCL	(GPIO_LCD_BASE + 10)	/* aux_gpio3_2 */
+#define GPIO_LCD_CS	(GPIO_LCD_BASE + 11)	/* aux_gpio3_3 */
+#define LCD_SPI_BUS_NUM	(1)
+
+static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
+	.sck		= GPIO_LCD_SCL,
+	.mosi		= GPIO_LCD_DIN,
+	.miso		= GPIO_LCD_DOUT,
+	.num_chipselect	= 1,
+};
+
+static struct platform_device cm_x300_spi_gpio = {
+	.name		= "spi_gpio",
+	.id		= LCD_SPI_BUS_NUM,
+	.dev		= {
+		.platform_data	= &cm_x300_spi_gpio_pdata,
+	},
+};
+
+static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
+	.model = TDO35S,
+};
+
+static struct spi_board_info cm_x300_spi_devices[] __initdata = {
+	{
+		.modalias		= "tdo24m",
+		.max_speed_hz		= 1000000,
+		.bus_num		= LCD_SPI_BUS_NUM,
+		.chip_select		= 0,
+		.controller_data	= (void *) GPIO_LCD_CS,
+		.platform_data		= &cm_x300_tdo24m_pdata,
+	},
+};
+
+static void __init cm_x300_init_spi(void)
+{
+	spi_register_board_info(cm_x300_spi_devices,
+				ARRAY_SIZE(cm_x300_spi_devices));
+	platform_device_register(&cm_x300_spi_gpio);
+}
+#else
+static inline void cm_x300_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static void __init cm_x300_init_ac97(void)
+{
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cm_x300_init_ac97(void) {}
+#endif
+
 #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
 static struct mtd_partition cm_x300_nand_partitions[] = {
 	[0] = {
@@ -333,9 +470,19 @@ static inline void cm_x300_init_mmc(void) {}
 #endif
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int cm_x300_ohci_init(struct device *dev)
+{
+	if (cpu_is_pxa300())
+		UP2OCR = UP2OCR_HXS
+			| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+	return 0;
+}
+
 static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW,
+	.init		= cm_x300_ohci_init,
 };
 
 static void __init cm_x300_init_ohci(void)
@@ -351,7 +498,6 @@ static struct gpio_led cm_x300_leds[] = {
 	[0] = {
 		.name = "cm-x300:green",
 		.default_trigger = "heartbeat",
-		.gpio = 79,
 		.active_low = 1,
 	},
 };
@@ -371,6 +517,11 @@ static struct platform_device cm_x300_led_device = {
 
 static void __init cm_x300_init_leds(void)
 {
+	if (system_rev < 130)
+		cm_x300_leds[0].gpio = 79;
+	else
+		cm_x300_leds[0].gpio = 76;
+
 	platform_device_register(&cm_x300_led_device);
 }
 #else
@@ -433,11 +584,94 @@ static void __init cm_x300_init_rtc(void)
 static inline void cm_x300_init_rtc(void) {}
 #endif
 
-static void __init cm_x300_init(void)
+/* DA9030 */
+struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
+	{
+		.name = "da903x-backlight",
+		.id = DA9030_ID_WLED,
+	}
+};
+
+static struct da903x_platform_data cm_x300_da9030_info = {
+	.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
+	.subdevs = cm_x300_da9030_subdevs,
+};
+
+static struct i2c_board_info cm_x300_pmic_info = {
+	I2C_BOARD_INFO("da9030", 0x49),
+	.irq = IRQ_GPIO(0),
+	.platform_data = &cm_x300_da9030_info,
+};
+
+static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
+	.use_pio = 1,
+};
+
+static void __init cm_x300_init_da9030(void)
+{
+	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
+	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+}
+
+static void __init cm_x300_init_wi2wi(void)
+{
+	int bt_reset, wlan_en;
+	int err;
+
+	if (system_rev < 130) {
+		wlan_en = 77;
+		bt_reset = 78;
+	} else {
+		wlan_en = 71;
+		bt_reset = 70;
+	}
+
+	/* Libertas and CSR reset */
+	err = gpio_request(wlan_en, "wlan en");
+	if (err) {
+		pr_err("CM-X300: failed to request wlan en gpio: %d\n", err);
+	} else {
+		gpio_direction_output(wlan_en, 1);
+		gpio_free(wlan_en);
+	}
+
+	err = gpio_request(bt_reset, "bt reset");
+	if (err) {
+		pr_err("CM-X300: failed to request bt reset gpio: %d\n", err);
+	} else {
+		gpio_direction_output(bt_reset, 1);
+		udelay(10);
+		gpio_set_value(bt_reset, 0);
+		udelay(10);
+		gpio_set_value(bt_reset, 1);
+		gpio_free(bt_reset);
+	}
+}
+
+/* MFP */
+static void __init cm_x300_init_mfp(void)
 {
 	/* board-processor specific GPIO initialization */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
+
+	if (system_rev < 130)
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
+	else
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
+
+	if (cpu_is_pxa310())
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
+}
+
+static void __init cm_x300_init(void)
+{
+	cm_x300_init_mfp();
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 
+	cm_x300_init_da9030();
 	cm_x300_init_dm9000();
 	cm_x300_init_lcd();
 	cm_x300_init_ohci();
@@ -445,7 +679,11 @@ static void __init cm_x300_init(void)
 	cm_x300_init_nand();
 	cm_x300_init_leds();
 	cm_x300_init_i2c();
+	cm_x300_init_spi();
 	cm_x300_init_rtc();
+	cm_x300_init_ac97();
+	cm_x300_init_wi2wi();
+	cm_x300_init_bl();
 }
 
 static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 01bcfaae75bc..061c45316de8 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -130,6 +130,9 @@ static struct platform_device *colibri_pxa270_devices[] __initdata = {
 static void __init colibri_pxa270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
 }
 
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 37c239c56568..45c23fd6df31 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -170,6 +170,10 @@ static inline void colibri_pxa310_init_ac97(void) {}
 
 void __init colibri_pxa300_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	colibri_pxa300_init_eth();
 	colibri_pxa300_init_ohci();
 	colibri_pxa3xx_init_nand();
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ec0e14b96682..ae835fad7d10 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -199,6 +199,10 @@ static void __init colibri_pxa320_init_uart(void)
 
 void __init colibri_pxa320_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	colibri_pxa320_init_eth();
 	colibri_pxa320_init_ohci();
 	colibri_pxa3xx_init_nand();
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index efebaf4d734d..e6c0a2287eb8 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -25,7 +25,7 @@
 #include <mach/colibri.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b536b5a5a10d..74446cf8ae69 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -671,6 +671,10 @@ static void __init corgi_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index a093282fe4db..d4a0733e905b 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -214,8 +214,8 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
 	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
 	.bat_levels       = 40,
-	.bat_levels_noac  = spitz_battery_levels_noac,
-	.bat_levels_acin  = spitz_battery_levels_acin,
+	.bat_levels_noac  = sharpsl_battery_levels_noac,
+	.bat_levels_acin  = sharpsl_battery_levels_acin,
 	.status_high_acin = 188,
 	.status_low_acin  = 178,
 	.status_high_noac = 185,
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 965480eb4fe6..88575b87bd33 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -268,6 +268,9 @@ static void __init csb726_init(void)
 /*	MSC2 = 0x06697ff4; *//* none/SM501 */
 	MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	pxa_set_i2c_info(NULL);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_mci_info(&csb726_mci);
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 46fabe1cca11..3395463bb5a6 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,17 +4,18 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
+#include <mach/hardware.h>
 #include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
-#include <plat/i2c.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -167,13 +168,18 @@ static struct resource pxa_resource_ffuart[] = {
 	}
 };
 
-struct platform_device pxa_device_ffuart= {
+struct platform_device pxa_device_ffuart = {
 	.name		= "pxa2xx-uart",
 	.id		= 0,
 	.resource	= pxa_resource_ffuart,
 	.num_resources	= ARRAY_SIZE(pxa_resource_ffuart),
 };
 
+void __init pxa_set_ffuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_ffuart, info);
+}
+
 static struct resource pxa_resource_btuart[] = {
 	{
 		.start	= 0x40200000,
@@ -193,6 +199,11 @@ struct platform_device pxa_device_btuart = {
 	.num_resources	= ARRAY_SIZE(pxa_resource_btuart),
 };
 
+void __init pxa_set_btuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_btuart, info);
+}
+
 static struct resource pxa_resource_stuart[] = {
 	{
 		.start	= 0x40700000,
@@ -212,6 +223,11 @@ struct platform_device pxa_device_stuart = {
 	.num_resources	= ARRAY_SIZE(pxa_resource_stuart),
 };
 
+void __init pxa_set_stuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_stuart, info);
+}
+
 static struct resource pxa_resource_hwuart[] = {
 	{
 		.start	= 0x41600000,
@@ -231,6 +247,14 @@ struct platform_device pxa_device_hwuart = {
 	.num_resources	= ARRAY_SIZE(pxa_resource_hwuart),
 };
 
+void __init pxa_set_hwuart_info(void *info)
+{
+	if (cpu_is_pxa255())
+		pxa_register_device(&pxa_device_hwuart, info);
+	else
+		pr_info("UART: Ignoring attempt to register HWUART on non-PXA255 hardware");
+}
+
 static struct resource pxai2c_resources[] = {
 	{
 		.start	= 0x40301680,
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
index 74d3f8987c5c..8fde3387279d 100644
--- a/arch/arm/mach-pxa/e330.c
+++ b/arch/arm/mach-pxa/e330.c
@@ -55,6 +55,9 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e330_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
index 080036272131..f50f055f5720 100644
--- a/arch/arm/mach-pxa/e350.c
+++ b/arch/arm/mach-pxa/e350.c
@@ -56,6 +56,9 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e350_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
index ed9c0c3f64a2..55b950f12844 100644
--- a/arch/arm/mach-pxa/e400.c
+++ b/arch/arm/mach-pxa/e400.c
@@ -130,6 +130,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init e400_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	/* Fixme - e400 may have a switched clock */
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 49acdfa6650d..94b23a9e3877 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -192,6 +192,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init e740_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
 			"UDCCLK", &pxa25x_device_udc.dev),
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 4052ece3ef49..5eccbce73a33 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -194,6 +194,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init e750_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index 9866c7b9e784..aad129bed199 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -195,6 +195,9 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e800_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index aec7f4214b14..1c0de808b54d 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -967,7 +967,7 @@ static inline void em_x270_init_gpio_keys(void) {}
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
 static struct regulator *em_x270_camera_ldo;
 
-static int em_x270_sensor_init(struct device *dev)
+static int em_x270_sensor_init(void)
 {
 	int ret;
 
@@ -996,7 +996,6 @@ static int em_x270_sensor_init(struct device *dev)
 }
 
 struct pxacamera_platform_data em_x270_camera_platform_data = {
-	.init	= em_x270_sensor_init,
 	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
 		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
 	.mclk_10khz = 2600,
@@ -1049,8 +1048,10 @@ static struct platform_device em_x270_camera = {
 
 static void  __init em_x270_init_camera(void)
 {
-	pxa_set_camera_info(&em_x270_camera_platform_data);
-	platform_device_register(&em_x270_camera);
+	if (em_x270_sensor_init() == 0) {
+		pxa_set_camera_info(&em_x270_camera_platform_data);
+		platform_device_register(&em_x270_camera);
+	}
 }
 #else
 static inline void em_x270_init_camera(void) {}
@@ -1286,6 +1287,10 @@ static void __init em_x270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 #ifdef CONFIG_PM
 	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
 #endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 588b265e5755..626c82b13970 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -17,7 +17,11 @@
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
 #include <linux/input.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/leds-lp3944.h>
+
+#include <media/soc_camera.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -29,6 +33,7 @@
 #include <plat/i2c.h>
 #include <mach/hardware.h>
 #include <mach/pxa27x_keypad.h>
+#include <mach/camera.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -38,6 +43,9 @@
 #define GPIO15_A910_FLIP_LID 		15
 #define GPIO12_E680_LOCK_SWITCH 	12
 #define GPIO15_E6_LOCK_SWITCH 		15
+#define GPIO50_nCAM_EN			50
+#define GPIO19_GEN1_CAM_RST		19
+#define GPIO28_GEN2_CAM_RST		28
 
 static struct platform_pwm_backlight_data ezx_backlight_data = {
 	.pwm_id		= 0,
@@ -191,8 +199,8 @@ static unsigned long gen1_pin_config[] __initdata = {
 	GPIO94_CIF_DD_5,
 	GPIO17_CIF_DD_6,
 	GPIO108_CIF_DD_7,
-	GPIO50_GPIO,				/* CAM_EN */
-	GPIO19_GPIO,				/* CAM_RST */
+	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
+	GPIO19_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
 
 	/* EMU */
 	GPIO120_GPIO,				/* EMU_MUX1 */
@@ -248,8 +256,8 @@ static unsigned long gen2_pin_config[] __initdata = {
 	GPIO48_CIF_DD_5,
 	GPIO93_CIF_DD_6,
 	GPIO12_CIF_DD_7,
-	GPIO50_GPIO,				/* CAM_EN */
-	GPIO28_GPIO,				/* CAM_RST */
+	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
+	GPIO28_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
 	GPIO17_GPIO,				/* CAM_FLASH */
 };
 #endif
@@ -683,6 +691,81 @@ static struct platform_device a780_gpio_keys = {
 	},
 };
 
+/* camera */
+static int a780_camera_init(void)
+{
+	int err;
+
+	/*
+	 * GPIO50_nCAM_EN is active low
+	 * GPIO19_GEN1_CAM_RST is active on rising edge
+	 */
+	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+	if (err) {
+		pr_err("%s: Failed to request nCAM_EN\n", __func__);
+		goto fail;
+	}
+
+	err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
+	if (err) {
+		pr_err("%s: Failed to request CAM_RST\n", __func__);
+		goto fail_gpio_cam_rst;
+	}
+
+	gpio_direction_output(GPIO50_nCAM_EN, 1);
+	gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
+
+	return 0;
+
+fail_gpio_cam_rst:
+	gpio_free(GPIO50_nCAM_EN);
+fail:
+	return err;
+}
+
+static int a780_camera_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO50_nCAM_EN, !on);
+	return 0;
+}
+
+static int a780_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data a780_pxacamera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a780_camera_i2c_board_info = {
+	I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a780_iclink = {
+	.bus_id         = 0,
+	.flags          = SOCAM_SENSOR_INVERT_PCLK,
+	.i2c_adapter_id = 0,
+	.board_info     = &a780_camera_i2c_board_info,
+	.module_name    = "mt9m111",
+	.power          = a780_camera_power,
+	.reset          = a780_camera_reset,
+};
+
+static struct platform_device a780_camera = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &a780_iclink,
+	},
+};
+
 static struct platform_device *a780_devices[] __initdata = {
 	&a780_gpio_keys,
 };
@@ -693,12 +776,21 @@ static void __init a780_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 
 	set_pxa_fb_info(&ezx_fb_info_1);
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
+	if (a780_camera_init() == 0) {
+		pxa_set_camera_info(&a780_pxacamera_platform_data);
+		platform_device_register(&a780_camera);
+	}
+
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
 }
@@ -754,6 +846,10 @@ static void __init e680_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
 
@@ -816,6 +912,10 @@ static void __init a1200_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
 
@@ -864,6 +964,131 @@ static struct platform_device a910_gpio_keys = {
 	},
 };
 
+/* camera */
+static int a910_camera_init(void)
+{
+	int err;
+
+	/*
+	 * GPIO50_nCAM_EN is active low
+	 * GPIO28_GEN2_CAM_RST is active on rising edge
+	 */
+	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+	if (err) {
+		pr_err("%s: Failed to request nCAM_EN\n", __func__);
+		goto fail;
+	}
+
+	err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
+	if (err) {
+		pr_err("%s: Failed to request CAM_RST\n", __func__);
+		goto fail_gpio_cam_rst;
+	}
+
+	gpio_direction_output(GPIO50_nCAM_EN, 1);
+	gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
+
+	return 0;
+
+fail_gpio_cam_rst:
+	gpio_free(GPIO50_nCAM_EN);
+fail:
+	return err;
+}
+
+static int a910_camera_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO50_nCAM_EN, !on);
+	return 0;
+}
+
+static int a910_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data a910_pxacamera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a910_camera_i2c_board_info = {
+	I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a910_iclink = {
+	.bus_id         = 0,
+	.i2c_adapter_id = 0,
+	.board_info     = &a910_camera_i2c_board_info,
+	.module_name    = "mt9m111",
+	.power          = a910_camera_power,
+	.reset          = a910_camera_reset,
+};
+
+static struct platform_device a910_camera = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &a910_iclink,
+	},
+};
+
+/* leds-lp3944 */
+static struct lp3944_platform_data a910_lp3944_leds = {
+	.leds_size = LP3944_LEDS_MAX,
+	.leds = {
+		[0] = {
+			.name = "a910:red:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[1] = {
+			.name = "a910:green:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[2] {
+			.name = "a910:blue:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		/* Leds 3 and 4 are used as display power switches */
+		[3] = {
+			.name = "a910::cli_display",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED_INVERTED
+		},
+		[4] = {
+			.name = "a910::main_display",
+			.status = LP3944_LED_STATUS_ON,
+			.type = LP3944_LED_TYPE_LED_INVERTED
+		},
+		[5] = { .type = LP3944_LED_TYPE_NONE },
+		[6] = {
+			.name = "a910::torch",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[7] = {
+			.name = "a910::flash",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED_INVERTED,
+		},
+	},
+};
+
+static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("lp3944", 0x60),
+		.platform_data = &a910_lp3944_leds,
+	},
+};
+
 static struct platform_device *a910_devices[] __initdata = {
 	&a910_gpio_keys,
 };
@@ -874,12 +1099,22 @@ static void __init a910_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
 
 	set_pxa_fb_info(&ezx_fb_info_2);
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
+	if (a910_camera_init() == 0) {
+		pxa_set_camera_info(&a910_pxacamera_platform_data);
+		platform_device_register(&a910_camera);
+	}
+
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
 }
@@ -935,6 +1170,10 @@ static void __init e6_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
 
@@ -971,6 +1210,10 @@ static void __init e2_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
 
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 485fede83d97..890fb90a672f 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -67,3 +67,8 @@ extern struct sysdev_class pxa_irq_sysclass;
 extern struct sysdev_class pxa_gpio_sysclass;
 extern struct sysdev_class pxa2xx_mfp_sysclass;
 extern struct sysdev_class pxa3xx_mfp_sysclass;
+
+void __init pxa_set_ffuart_info(void *info);
+void __init pxa_set_btuart_info(void *info);
+void __init pxa_set_stuart_info(void *info);
+void __init pxa_set_hwuart_info(void *info);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 1708c0109844..96c345129135 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -211,6 +211,11 @@ static void __init gumstix_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	pxa_set_hwuart_info(NULL);
+
 	gumstix_bluetooth_init();
 	gumstix_udc_init();
 	gumstix_mmc_init();
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index f3d220c32e07..c1cab0871c99 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -193,6 +193,9 @@ static void __init h5000_init(void)
 	fix_msc();
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	pxa_set_udc_info(&h5000_udc_mach_info);
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index cea99fe65b97..f9a2e4b0f090 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -150,6 +150,9 @@ static void __init himalaya_lcd_init(void)
 
 static void __init himalaya_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	himalaya_lcd_init();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 83bd3c6e3884..848c861dd23f 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -820,6 +820,7 @@ static struct platform_device *devices[] __initdata = {
 	&gpio_keys,
 	&backlight,
 	&w3220,
+	&hx4700_lcd,
 	&egpio,
 	&bq24022,
 	&gpio_vbus,
@@ -849,6 +850,10 @@ static void __init hx4700_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
 	hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	pxa_set_ficp_info(&ficp_info);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index b6486ef20b17..5c9e11d74f49 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -179,6 +179,9 @@ static void __init idp_init(void)
 	printk("idp_init()\n");
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 
 	platform_device_register(&smc91x_device);
 	//platform_device_register(&mst_audio_device);
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2a4945db31c5..5b0862df61ab 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -554,8 +554,12 @@ static struct i2c_pxa_platform_data i2c_pdata = {
 
 static void __init imote2_init(void)
 {
-
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* SPI chip select directions - all other directions should
 	 * be handled by drivers.*/
 	gpio_direction_output(37, 0);
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index aa3d9f70a08a..50f1297bf5ac 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -105,6 +105,7 @@
  *
  *  PXA935	A0	0x56056931	0x1E653013
  *  PXA935	B0	0x56056936	0x6E653013
+ *  PXA935	B1	0x56056938	0x8E653013
  */
 #ifdef CONFIG_PXA25x
 #define __cpu_is_pxa210(id)				\
@@ -283,7 +284,7 @@
 		_id == 0x3;				\
 	 })
 
-#define __cpu_is_pxa9xx(id)				\
+#define __cpu_is_pxa93x(id)				\
 	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
 		_id == 0x683 || _id == 0x693;		\
@@ -299,9 +300,9 @@
 		__cpu_is_pxa3xx(read_cpuid_id());	\
 	 })
 
-#define cpu_is_pxa9xx()					\
+#define cpu_is_pxa93x()					\
 	({						\
-		__cpu_is_pxa9xx(read_cpuid_id());	\
+		__cpu_is_pxa93x(read_cpuid_id());	\
 	 })
 /*
  * return current memory and LCD clock frequency in units of 10kHz
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index 8721b8010221..ae536e86d8e8 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -91,7 +91,7 @@
 /* BATTERY */
 #define PALMLD_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
 #define PALMLD_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMLD_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMLD_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMLD_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMLD_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMLD_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index d15662aba008..6baf7469d4ec 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -66,7 +66,7 @@
 /* BATTERY */
 #define PALMT5_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
 #define PALMT5_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMT5_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMT5_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMT5_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMT5_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMT5_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
index 3dc9b074ab46..3f9dd3fd4638 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -68,7 +68,7 @@
 /* BATTERY */
 #define PALMTC_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
 #define PALMTC_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMTC_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTC_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMTC_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMTC_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMTC_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h
index 12361341f9d8..f89e989a7637 100644
--- a/arch/arm/mach-pxa/include/mach/palmte2.h
+++ b/arch/arm/mach-pxa/include/mach/palmte2.h
@@ -59,7 +59,7 @@
 /* BATTERY */
 #define PALMTE2_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
 #define PALMTE2_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTE2_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTE2_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMTE2_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMTE2_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMTE2_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h
new file mode 100644
index 000000000000..2d3f14e3be29
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtreo.h
@@ -0,0 +1,67 @@
+/*
+ * GPIOs and interrupts for Palm Treo smartphones
+ *
+ * currently supported:
+ *     Palm Treo 680 (GSM)
+ *     Palm Centro 685 (GSM)
+ *
+ * Author:     Tomas Cech <sleep_walker@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * find more info at www.hackndev.com
+ *
+ */
+
+#ifndef _INCLUDE_TREO_H_
+#define _INCLUDE_TREO_H_
+
+/* GPIOs */
+#define GPIO_NR_TREO_POWER_DETECT	0
+#define GPIO_NR_TREO_AMP_EN		27
+#define GPIO_NR_TREO_GREEN_LED	20
+#define GPIO_NR_TREO_RED_LED		79
+#define GPIO_NR_TREO_SD_DETECT_N	113
+#define GPIO_NR_TREO_EP_DETECT_N	116
+#define GPIO_NR_TREO_USB_DETECT	1
+#define GPIO_NR_TREO_USB_PULLUP	114
+#define GPIO_NR_TREO_GSM_POWER	40
+#define GPIO_NR_TREO_GSM_RESET	87
+#define GPIO_NR_TREO_GSM_WAKE	57
+#define GPIO_NR_TREO_GSM_HOST_WAKE	14
+#define GPIO_NR_TREO_GSM_TRIGGER	10
+#define GPIO_NR_TREO_IR_EN		115
+#define GPIO_NR_TREO_IR_TXD		47
+#define GPIO_NR_TREO_BL_POWER	38
+#define GPIO_NR_TREO_LCD_POWER	25
+
+/* Treo680 specific GPIOs */
+#ifdef CONFIG_MACH_TREO680
+#define GPIO_NR_TREO680_SD_READONLY	33
+#define GPIO_NR_TREO680_SD_POWER	42
+#define GPIO_NR_TREO680_VIBRATE_EN	44
+#define GPIO_NR_TREO680_KEYB_BL		24
+#define GPIO_NR_TREO680_BT_EN		43
+#endif /* CONFIG_MACH_TREO680 */
+
+/* Centro685 specific GPIOs */
+#define GPIO_NR_CENTRO_SD_POWER		21
+#define GPIO_NR_CENTRO_VIBRATE_EN	22
+#define GPIO_NR_CENTRO_KEYB_BL		33
+#define GPIO_NR_CENTRO_BT_EN		80
+
+/* Various addresses  */
+#define TREO_PHYS_RAM_START	0xa0000000
+#define TREO_PHYS_IO_START	0x40000000
+#define TREO_STR_BASE	0xa2000000
+
+/* BACKLIGHT */
+#define TREO_MAX_INTENSITY		254
+#define TREO_DEFAULT_INTENSITY	160
+#define TREO_LIMIT_MASK		0x7F
+#define TREO_PRESCALER		63
+#define TREO_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 1be0db6ed55e..10abc4f2e8e4 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -94,7 +94,7 @@
 /* BATTERY */
 #define PALMTX_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
 #define PALMTX_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTX_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTX_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMTX_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMTX_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMTX_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 2806ef69ba5a..2bbcf70dd935 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -49,7 +49,7 @@
 /* Battery */
 #define PALMZ72_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
 #define PALMZ72_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMZ72_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMZ72_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMZ72_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMZ72_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMZ72_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index f73061c90b5e..160ec83f51a6 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -76,7 +76,8 @@ struct pxafb_mode_info {
 	u_char		bpp;
 	u_int		cmap_greyscale:1,
 			depth:8,
-			unused:23;
+			transparency:1,
+			unused:22;
 
 	/* Parallel Mode Timing */
 	u_char		hsync_len;
diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/include/mach/regs-u2d.h
new file mode 100644
index 000000000000..44b0b20b69a4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-u2d.h
@@ -0,0 +1,199 @@
+#ifndef __ASM_ARCH_PXA3xx_U2D_H
+#define __ASM_ARCH_PXA3xx_U2D_H
+
+#include <mach/bitfield.h>
+
+/*
+ * USB2 device controller registers and bits definitions
+ */
+#define U2DCR		(0x0000)	/* U2D Control Register */
+#define U2DCR_NDC	(1   << 31)	/* NAK During Config */
+#define U2DCR_HSTC	(0x7 << 28)	/* High Speed Timeout Calibration */
+#define U2DCR_SPEOREN	(1   << 27)	/* Short Packet EOR INTR generation Enable */
+#define U2DCR_FSTC	(0x7 << 24)	/* Full Speed Timeout Calibration */
+#define U2DCR_UCLKOVR	(1   << 22)	/* UTM Clock Override */
+#define U2DCR_ABP	(1   << 21)	/* Application Bus Power */
+#define U2DCR_ADD	(1   << 20)	/* Application Device Disconnect */
+#define U2DCR_CC	(1   << 19)	/* Configuration Change */
+#define U2DCR_HS	(1   << 18)	/* High Speed USB Detection */
+#define U2DCR_SMAC	(1   << 17)	/* Switch Endpoint Memory to Active Configuration */
+#define U2DCR_DWRE	(1   << 16)	/* Device Remote Wake-up Feature */
+#define U2DCR_ACN	(0xf << 12)	/* Active U2D Configuration Number */
+#define U2DCR_AIN	(0xf << 8)	/* Active U2D Interface Number */
+#define U2DCR_AAISN	(0xf << 4)	/* Active U2D Alternate Interface Setting Number */
+#define U2DCR_EMCE	(1   << 3)	/* Endpoint Memory Configuration Error */
+#define U2DCR_UDR	(1   << 2)	/* U2D Resume */
+#define U2DCR_UDA	(1   << 1)	/* U2D Active */
+#define U2DCR_UDE	(1   << 0)	/* U2D Enable */
+
+#define U2DICR			(0x0004)	/* U2D Interrupt Control Register */
+#define U2DISR			(0x000C)	/* U2D Interrupt Status Register */
+#define U2DINT_CC		(1 << 31)	/* Interrupt - Configuration Change */
+#define U2DINT_SOF		(1 << 30)	/* Interrupt - SOF */
+#define U2DINT_USOF		(1 << 29)	/* Interrupt - micro SOF */
+#define U2DINT_RU		(1 << 28)	/* Interrupt - Resume */
+#define U2DINT_SU		(1 << 27)	/* Interrupt - Suspend */
+#define U2DINT_RS		(1 << 26)	/* Interrupt - Reset */
+#define U2DINT_DPE		(1 << 25)	/* Interrupt - Data Packet Error */
+#define U2DINT_FIFOERR		(0x4)		/* Interrupt - endpoint FIFO error */
+#define U2DINT_PACKETCMP	(0x2)		/* Interrupt - endpoint packet complete */
+#define U2DINT_SPACKETCMP	(0x1)		/* Interrupt - endpoint short packet complete */
+
+#define U2DFNR			(0x0014)	/* U2D Frame Number Register */
+
+#define U2DINT(n, intr)		(((intr) & 0x07) << (((n) & 0x07) * 3))
+#define U2DICR2			(0x0008)	/* U2D Interrupt Control Register 2 */
+#define U2DISR2			(0x0010)	/* U2D Interrupt Status Register 2 */
+
+#define U2DOTGCR		(0x0020)	/* U2D OTG Control Register */
+#define U2DOTGCR_OTGEN		(1 << 31)	/* On-The-Go Enable */
+#define U2DOTGCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation Protocal Port Support */
+#define U2DOTGCR_AHNP		(1 << 29)	/* A-device Host Negotiation Protocal Support */
+#define U2DOTGCR_BHNP		(1 << 28)	/* B-device Host Negotiation Protocal Enable */
+
+#ifdef CONFIG_CPU_PXA930
+#define U2DOTGCR_LPA		(1 << 15)	/* ULPI low power mode active */
+#define U2DOTGCR_IESI		(1 << 13)	/* OTG interrupt Enable */
+#define U2DOTGCR_ISSI		(1 << 12)	/* OTG interrupt status */
+#endif
+
+#define U2DOTGCR_CKAF	(1 << 5)	/* Carkit Mode Alternate Function Select */
+#define U2DOTGCR_UTMID	(1 << 4)	/* UTMI Interface Disable */
+#define U2DOTGCR_ULAF	(1 << 3)	/* ULPI Mode Alternate Function Select */
+#define U2DOTGCR_SMAF	(1 << 2)	/* Serial Mode Alternate Function Select */
+#define U2DOTGCR_RTSM	(1 << 1)	/* Return to Synchronous Mode (ULPI Mode) */
+#define U2DOTGCR_ULE	(1 << 0)	/* ULPI Wrapper Enable */
+
+#define U2DOTGICR	(0x0024)	/* U2D OTG Interrupt Control Register */
+#define U2DOTGISR	(0x0028)	/* U2D OTG Interrupt Status Register */
+
+#define U2DOTGINT_SF	(1 << 17)	/* OTG Set Feature Command Received */
+#define U2DOTGINT_SI	(1 << 16)	/* OTG Interrupt */
+#define U2DOTGINT_RLS1	(1 << 14)	/* RXCMD Linestate[1] Change Interrupt Rise */
+#define U2DOTGINT_RLS0	(1 << 13)	/* RXCMD Linestate[0] Change Interrupt Rise */
+#define U2DOTGINT_RID	(1 << 12)	/* RXCMD OTG ID Change Interrupt Rise */
+#define U2DOTGINT_RSE	(1 << 11)	/* RXCMD OTG Session End Interrupt Rise */
+#define U2DOTGINT_RSV	(1 << 10)	/* RXCMD OTG Session Valid Interrupt Rise */
+#define U2DOTGINT_RVV	(1 << 9)	/* RXCMD OTG Vbus Valid Interrupt Rise */
+#define U2DOTGINT_RCK	(1 << 8)	/* RXCMD Carkit Interrupt Rise */
+#define U2DOTGINT_FLS1	(1 << 6)	/* RXCMD Linestate[1] Change Interrupt Fall */
+#define U2DOTGINT_FLS0	(1 << 5)	/* RXCMD Linestate[0] Change Interrupt Fall */
+#define U2DOTGINT_FID	(1 << 4)	/* RXCMD OTG ID Change Interrupt Fall */
+#define U2DOTGINT_FSE	(1 << 3)	/* RXCMD OTG Session End Interrupt Fall */
+#define U2DOTGINT_FSV	(1 << 2)	/* RXCMD OTG Session Valid Interrupt Fall */
+#define U2DOTGINT_FVV	(1 << 1)	/* RXCMD OTG Vbus Valid Interrupt Fall */
+#define U2DOTGINT_FCK	(1 << 0)	/* RXCMD Carkit Interrupt Fall */
+
+#define U2DOTGUSR	(0x002C)	/* U2D OTG ULPI Status Register */
+#define U2DOTGUSR_LPA	(1 << 31)	/* ULPI Low Power Mode Active */
+#define U2DOTGUSR_S6A	(1 << 30)	/* ULPI Serial Mode (6-pin) Active */
+#define U2DOTGUSR_S3A	(1 << 29)	/* ULPI Serial Mode (3-pin) Active */
+#define U2DOTGUSR_CKA	(1 << 28)	/* ULPI Car Kit Mode Active */
+#define U2DOTGUSR_LS1	(1 << 6)	/* RXCMD Linestate 1 Status */
+#define U2DOTGUSR_LS0	(1 << 5)	/* RXCMD Linestate 0 Status */
+#define U2DOTGUSR_ID	(1 << 4)	/* OTG IDGnd Status */
+#define U2DOTGUSR_SE	(1 << 3)	/* OTG Session End Status */
+#define U2DOTGUSR_SV	(1 << 2)	/* OTG Session Valid Status */
+#define U2DOTGUSR_VV	(1 << 1)	/* OTG Vbus Valid Status */
+#define U2DOTGUSR_CK	(1 << 0)	/* Carkit Interrupt Status */
+
+#define U2DOTGUCR	(0x0030)	/* U2D OTG ULPI Control Register */
+#define U2DOTGUCR_RUN	(1    << 25)	/* RUN */
+#define U2DOTGUCR_RNW	(1    << 24)	/* Read or Write operation */
+#define U2DOTGUCR_ADDR	(0x3f << 16)	/* Address of the ULPI PHY register */
+#define U2DOTGUCR_WDATA	(0xff << 8)	/* The data for a WRITE command */
+#define U2DOTGUCR_RDATA	(0xff << 0)	/* The data for a READ command */
+
+#define U2DP3CR		(0x0034)	/* U2D Port 3 Control Register */
+#define U2DP3CR_P2SS	(0x3 << 8)	/* Host Port 2 Serial Mode Select */
+#define U2DP3CR_P3SS	(0x7 << 4)	/* Host Port 3 Serial Mode Select */
+#define U2DP3CR_VPVMBEN	(0x1 << 2)	/* Host Port 3 Vp/Vm Block Enable */
+#define U2DP3CR_CFG	(0x3 << 0)	/* Host Port 3 Configuration */
+
+#define U2DCSR0		(0x0100)	/* U2D Control/Status Register - Endpoint 0 */
+#define U2DCSR0_IPA	(1 << 8)	/* IN Packet Adjusted */
+#define U2DCSR0_SA	(1 << 7)	/* SETUP Active */
+#define U2DCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
+#define U2DCSR0_FST	(1 << 5)	/* Force Stall */
+#define U2DCSR0_SST	(1 << 4)	/* Send Stall */
+#define U2DCSR0_DME	(1 << 3)	/* DMA Enable */
+#define U2DCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
+#define U2DCSR0_IPR	(1 << 1)	/* IN Packet Ready */
+#define U2DCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
+
+#define U2DCSR(x)	(0x0100 + ((x) << 2))	/* U2D Control/Status Register - Endpoint x */
+#define U2DCSR_BF	(1 << 10)	/* Buffer Full, for OUT eps */
+#define U2DCSR_BE	(1 << 10)	/* Buffer Empty, for IN eps */
+#define U2DCSR_DPE	(1 << 9)	/* Data Packet Error, for ISO eps only */
+#define U2DCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
+#define U2DCSR_SP	(1 << 7)	/* Short Packet Control/Status, for OUT eps only, readonly */
+#define U2DCSR_BNE	(1 << 6)	/* Buffer Not Empty, for OUT eps */
+#define U2DCSR_BNF	(1 << 6)	/* Buffer Not Full, for IN eps */
+#define U2DCSR_FST	(1 << 5)	/* Force STALL, write 1 set */
+#define U2DCSR_SST	(1 << 4)	/* Sent STALL, write 1 clear */
+#define U2DCSR_DME	(1 << 3)	/* DMA Enable */
+#define U2DCSR_TRN	(1 << 2)	/* Tx/Rx NAK, write 1 clear */
+#define U2DCSR_PC	(1 << 1)	/* Packet Complete, write 1 clear */
+#define U2DCSR_FS	(1 << 0)	/* FIFO needs Service */
+
+#define U2DBCR0		(0x0200)		/* U2D Byte Count Register - Endpoint 0 */
+#define U2DBCR(x)	(0x0200 + ((x) << 2))	/* U2D Byte Count Register - Endpoint x */
+
+#define U2DDR0		(0x0300)		/* U2D Data Register - Endpoint 0 */
+
+#define U2DEPCR(x)	(0x0400 + ((x) << 2))	/* U2D Configuration Register - Endpoint x */
+#define U2DEPCR_EE	(1 << 0)		/* Endpoint Enable */
+#define U2DEPCR_BS_MASK	(0x3FE)			/* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */
+
+#define U2DSCA		(0x0500)		/* U2D Setup Command Address */
+#define U2DSCA_VALUE	(0x0120)
+
+#define U2DEN0		(0x0504)		/* U2D Endpoint Information Register - Endpoint 0 */
+#define U2DEN(x)	(0x0504 + ((x) << 2))	/* U2D Endpoint Information Register - Endpoint x */
+
+/* U2DMA registers */
+#define U2DMACSR0		(0x1000)	/* U2DMA Control/Status Register - Channel 0 */
+#define U2DMACSR(x)		(0x1000 + ((x) << 2))	/* U2DMA Control/Status Register - Channel x */
+#define U2DMACSR_RUN		(1 << 31)	/* Run Bit (read / write) */
+#define U2DMACSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
+#define U2DMACSR_EORIRQEN	(1 << 28)	/* End of Receive Interrupt Enable (R/W) */
+#define U2DMACSR_EORJMPEN	(1 << 27)	/* Jump to next descriptor on EOR */
+#define U2DMACSR_EORSTOPEN	(1 << 26)	/* STOP on an EOR */
+#define U2DMACSR_RASIRQEN	(1 << 23)	/* Request After Cnannel Stopped Interrupt Enable */
+#define U2DMACSR_MASKRUN	(1 << 22)	/* Mask Run */
+#define U2DMACSR_SCEMC		(3 << 18)	/* System Bus Split Completion Error Message Class */
+#define U2DMACSR_SCEMI		(0x1f << 13)	/* System Bus Split Completion Error Message Index */
+#define U2DMACSR_BUSERRTYPE	(7 << 10)	/* PX Bus Error Type */
+#define U2DMACSR_EORINTR	(1 << 9)	/* End Of Receive */
+#define U2DMACSR_REQPEND	(1 << 8)	/* Request Pending */
+#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
+#define U2DMACSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write 1 clear) */
+#define U2DMACSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write 1 clear) */
+#define U2DMACSR_BUSERRINTR	(1 << 0)	/* Bus Error Interrupt (read / write 1 clear) */
+
+#define U2DMACR		(0x1080)		/* U2DMA Control Register */
+#define U2DMAINT	(0x10F0)		/* U2DMA Interrupt Register */
+
+#define U2DMABR0	(0x1100)		/* U2DMA Branch Register - Channel 0 */
+#define U2DMABR(x)      (0x1100 + (x) << 2)	/* U2DMA Branch Register - Channel x */
+
+#define U2DMADADR0      (0x1200)		/* U2DMA Descriptor Address Register - Channel 0 */
+#define U2DMADADR(x)    (0x1200 + (x) * 0x10)	/* U2DMA Descriptor Address Register - Channel x */
+
+#define U2DMADADR_STOP	(1U << 0)
+
+#define U2DMASADR0	(0x1204)		/* U2DMA Source Address Register - Channel 0 */
+#define U2DMASADR(x)	(0x1204 + (x) * 0x10)	/* U2DMA Source Address Register - Channel x */
+#define U2DMATADR0	(0x1208)		/* U2DMA Target Address Register - Channel 0 */
+#define U2DMATADR(x)	(0x1208 + (x) * 0x10)	/* U2DMA Target Address Register - Channel x */
+
+#define U2DMACMDR0	(0x120C)		/* U2DMA Command Address Register - Channel 0 */
+#define U2DMACMDR(x)	(0x120C + (x) * 0x10)	/* U2DMA Command Address Register - Channel x */
+
+#define U2DMACMDR_XFRDIS	(1 << 31)	/* Transfer Direction */
+#define U2DMACMDR_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define U2DMACMDR_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define U2DMACMDR_PACKCOMP	(1 << 13)	/* Packet Complete */
+#define U2DMACMDR_LEN		(0x07ff)	/* length mask (max = 2K - 1) */
+
+#endif /* __ASM_ARCH_PXA3xx_U2D_H */
diff --git a/arch/arm/mach-pxa/include/mach/treo680.h b/arch/arm/mach-pxa/include/mach/treo680.h
deleted file mode 100644
index af443b24d99a..000000000000
--- a/arch/arm/mach-pxa/include/mach/treo680.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * GPIOs and interrupts for Palm Treo 680 smartphone
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_TREO680_H_
-#define _INCLUDE_TREO680_H_
-
-/* GPIOs */
-#define GPIO_NR_TREO680_POWER_DETECT	0
-#define GPIO_NR_TREO680_AMP_EN		27
-#define GPIO_NR_TREO680_KEYB_BL		24
-#define GPIO_NR_TREO680_VIBRATE_EN	44
-#define GPIO_NR_TREO680_GREEN_LED	20
-#define GPIO_NR_TREO680_RED_LED		79
-#define GPIO_NR_TREO680_SD_DETECT_N	113
-#define GPIO_NR_TREO680_SD_READONLY	33
-#define GPIO_NR_TREO680_EP_DETECT_N	116
-#define GPIO_NR_TREO680_SD_POWER	42
-#define GPIO_NR_TREO680_USB_DETECT	1
-#define GPIO_NR_TREO680_USB_PULLUP	114
-#define GPIO_NR_TREO680_GSM_POWER	40
-#define GPIO_NR_TREO680_GSM_RESET	87
-#define GPIO_NR_TREO680_GSM_WAKE	57
-#define GPIO_NR_TREO680_GSM_HOST_WAKE	14
-#define GPIO_NR_TREO680_GSM_TRIGGER	10
-#define GPIO_NR_TREO680_BT_EN		43
-#define GPIO_NR_TREO680_IR_EN		115
-#define GPIO_NR_TREO680_IR_TXD		47
-#define GPIO_NR_TREO680_BL_POWER	38
-#define GPIO_NR_TREO680_LCD_POWER	25
-
-/* Various addresses  */
-#define TREO680_PHYS_RAM_START	0xa0000000
-#define TREO680_PHYS_IO_START	0x40000000
-#define TREO680_STR_BASE	0xa2000000
-
-/* BACKLIGHT */
-#define TREO680_MAX_INTENSITY		254
-#define TREO680_DEFAULT_INTENSITY	160
-#define TREO680_LIMIT_MASK		0x7F
-#define TREO680_PRESCALER		63
-#define TREO680_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 13848955d133..f28c1715b910 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -44,10 +44,10 @@
 #include <mach/ssp.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
-#include <plat/i2c.h>
 #include <mach/pxa27x_keypad.h>
-#include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "generic.h"
 
@@ -413,6 +413,10 @@ static void __init littleton_init(void)
 	/* initialize MFP configurations */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/*
 	 * Note: we depend bootloader set the correct
 	 * value to MSC register for SMC91x.
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index d64395f26a3e..1373c22dbb83 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -455,6 +455,10 @@ static void __init lpd270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
 	lpd270_flash_data[1].width = 4;
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index c6a94d3fdd61..98ee7e590299 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -518,6 +518,10 @@ static void __init lubbock_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
 	set_pxa_fb_info(&sharp_lm8v31);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5360c07f5138..8a38d604dc77 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -742,6 +742,10 @@ static void __init magician_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 
 	err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN");
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a4eeae345e64..851ee0fc32e2 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -576,6 +576,10 @@ static void __init mainstone_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
 	mst_flash_data[1].width = 4;
 
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 3cab452e5567..2466a44d8fda 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -798,6 +798,9 @@ static void __init mioa701_machine_init(void)
 	UP2OCR = UP2OCR_HXOE;
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 	bootstrap_init();
 	set_pxa_fb_info(&mioa701_pxafb_info);
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index a65713ce019e..6d4503927a76 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -84,6 +84,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init mp900c_init(void)
 {
 	printk(KERN_INFO "MobilePro 900/C machine init\n");
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 1ad029dd4438..59140217890a 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -530,6 +530,10 @@ static void __init palmld_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	palmld_pm_init();
 	set_pxa_fb_info(&palmld_lcd_screen);
 	pxa_set_mci_info(&palmld_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 2dd7ce28556b..7f89ca20f13a 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -419,6 +419,10 @@ static void __init palmt5_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	palmt5_pm_init();
 	set_pxa_fb_info(&palmt5_lcd_screen);
 	pxa_set_mci_info(&palmt5_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 0b92291a58f6..308417592007 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -416,6 +416,11 @@ static void __init palmtc_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	pxa_set_hwuart_info(NULL);
+
 	set_pxa_fb_info(&palmtc_lcd_screen);
 	pxa_set_mci_info(&palmtc_mci_platform_data);
 	pxa_set_udc_info(&palmtc_udc_info);
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 277c4062e3c6..265d62bae7de 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -373,6 +373,10 @@ static void __init palmte2_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	set_pxa_fb_info(&palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/palmtreo.c
index fe085076fbf2..606eb7e8a17e 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -1,5 +1,9 @@
 /*
- * Hardware definitions for Palm Treo 680
+ * Hardware definitions for Palm Treo smartphones
+ *
+ * currently supported:
+ *     Palm Treo 680 (GSM)
+ *     Palm Centro 685 (GSM)
  *
  * Author:     Tomas Cech <sleep_walker@suse.cz>
  *
@@ -31,7 +35,7 @@
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/audio.h>
-#include <mach/treo680.h>
+#include <mach/palmtreo.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
@@ -50,7 +54,7 @@
 /******************************************************************************
  * Pin configuration
  ******************************************************************************/
-static unsigned long treo680_pin_config[] __initdata = {
+static unsigned long treo_pin_config[] __initdata = {
 	/* MMC */
 	GPIO32_MMC_CLK,
 	GPIO92_MMC_DAT_0,
@@ -58,7 +62,6 @@ static unsigned long treo680_pin_config[] __initdata = {
 	GPIO110_MMC_DAT_2,
 	GPIO111_MMC_DAT_3,
 	GPIO112_MMC_CMD,
-	GPIO33_GPIO,				/* SD read only */
 	GPIO113_GPIO,				/* SD detect */
 
 	/* AC97 */
@@ -80,12 +83,10 @@ static unsigned long treo680_pin_config[] __initdata = {
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* usb detect */
 
 	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
 	GPIO101_KP_MKIN_1,
 	GPIO102_KP_MKIN_2,
 	GPIO97_KP_MKIN_3,
 	GPIO98_KP_MKIN_4,
-	GPIO99_KP_MKIN_5,
 	GPIO91_KP_MKIN_6,
 	GPIO13_KP_MKIN_7,
 	GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
@@ -150,19 +151,57 @@ static unsigned long treo680_pin_config[] __initdata = {
 	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* bluetooth host wake up */
 };
 
+#ifdef CONFIG_MACH_TREO680
+static unsigned long treo680_pin_config[] __initdata = {
+	GPIO33_GPIO,    /* SD read only */
+
+	/* MATRIX KEYPAD - different wake up source */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO99_KP_MKIN_5,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static unsigned long centro685_pin_config[] __initdata = {
+	/* Bluetooth attached to BT UART*/
+	MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW),    /* power: LOW = off */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* MATRIX KEYPAD - different wake up source */
+	GPIO100_KP_MKIN_0,
+	GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
 static struct pxamci_platform_data treo680_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_TREO680_SD_DETECT_N,
+	.gpio_card_detect	= GPIO_NR_TREO_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_TREO680_SD_READONLY,
 	.gpio_power		= GPIO_NR_TREO680_SD_POWER,
 };
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static struct pxamci_platform_data centro_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_TREO_SD_DETECT_N,
+	.gpio_card_ro		= -1,
+	.gpio_power		= GPIO_NR_CENTRO_SD_POWER,
+	.gpio_power_invert	= 1,
+};
+#endif /* CONFIG_MACH_CENTRO */
 
 /******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
 static unsigned int treo680_matrix_keys[] = {
 	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
 	KEY(0, 1, KEY_LEFT),
@@ -232,92 +271,167 @@ static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
 
 	.debounce_interval	= 30,
 };
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static unsigned int centro_matrix_keys[] = {
+	KEY(0, 0, KEY_F9),		/* Home */
+	KEY(0, 1, KEY_LEFT),
+	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
+	KEY(0, 3, KEY_L),
+	KEY(0, 4, KEY_A),
+	KEY(0, 5, KEY_Q),
+	KEY(0, 6, KEY_P),
+
+	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
+	KEY(1, 1, KEY_RIGHT),
+	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
+	KEY(1, 3, KEY_Z),
+	KEY(1, 4, KEY_S),
+	KEY(1, 5, KEY_W),
+
+	KEY(2, 0, KEY_F1),		/* Phone */
+	KEY(2, 1, KEY_UP),
+	KEY(2, 2, KEY_0),
+	KEY(2, 3, KEY_X),
+	KEY(2, 4, KEY_D),
+	KEY(2, 5, KEY_E),
+
+	KEY(3, 0, KEY_F10),		/* Calendar */
+	KEY(3, 1, KEY_DOWN),
+	KEY(3, 2, KEY_SPACE),
+	KEY(3, 3, KEY_C),
+	KEY(3, 4, KEY_F),
+	KEY(3, 5, KEY_R),
+
+	KEY(4, 0, KEY_F12),		/* Mail */
+	KEY(4, 1, KEY_KPENTER),
+	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
+	KEY(4, 3, KEY_V),
+	KEY(4, 4, KEY_G),
+	KEY(4, 5, KEY_T),
+
+	KEY(5, 0, KEY_F8),		/* Red/Off/Power */
+	KEY(5, 1, KEY_PAGEUP),		/* Side up */
+	KEY(5, 2, KEY_DOT),
+	KEY(5, 3, KEY_B),
+	KEY(5, 4, KEY_H),
+	KEY(5, 5, KEY_Y),
+
+	KEY(6, 0, KEY_TAB),		/* Side Activate */
+	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
+	KEY(6, 2, KEY_ENTER),
+	KEY(6, 3, KEY_N),
+	KEY(6, 4, KEY_J),
+	KEY(6, 5, KEY_U),
+
+	KEY(7, 0, KEY_F6),		/* Green/Call */
+	KEY(7, 1, KEY_O),
+	KEY(7, 2, KEY_BACKSPACE),
+	KEY(7, 3, KEY_M),
+	KEY(7, 4, KEY_K),
+	KEY(7, 5, KEY_I),
+};
+
+static struct pxa27x_keypad_platform_data centro_keypad_platform_data = {
+	.matrix_key_rows	= 8,
+	.matrix_key_cols	= 7,
+	.matrix_key_map		= centro_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(centro_matrix_keys),
+	.direct_key_map		= { KEY_CONNECT },
+	.direct_key_num		= 1,
+
+	.debounce_interval	= 30,
+};
+#endif /* CONFIG_MACH_CENTRO */
 
 /******************************************************************************
  * aSoC audio
  ******************************************************************************/
 
-static pxa2xx_audio_ops_t treo680_ac97_pdata = {
+static pxa2xx_audio_ops_t treo_ac97_pdata = {
 	.reset_gpio	= 95,
 };
 
 /******************************************************************************
  * Backlight
  ******************************************************************************/
-static int treo680_backlight_init(struct device *dev)
+static int treo_backlight_init(struct device *dev)
 {
 	int ret;
 
-	ret = gpio_request(GPIO_NR_TREO680_BL_POWER, "BL POWER");
+	ret = gpio_request(GPIO_NR_TREO_BL_POWER, "BL POWER");
 	if (ret)
 		goto err;
-	ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
+	ret = gpio_direction_output(GPIO_NR_TREO_BL_POWER, 0);
 	if (ret)
 		goto err2;
 
 	return 0;
 
 err2:
-	gpio_free(GPIO_NR_TREO680_BL_POWER);
+	gpio_free(GPIO_NR_TREO_BL_POWER);
 err:
 	return ret;
 }
 
-static int treo680_backlight_notify(int brightness)
+static int treo_backlight_notify(int brightness)
 {
-	gpio_set_value(GPIO_NR_TREO680_BL_POWER, brightness);
-	return TREO680_MAX_INTENSITY - brightness;
+	gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
+	return TREO_MAX_INTENSITY - brightness;
 };
 
-static void treo680_backlight_exit(struct device *dev)
+static void treo_backlight_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_TREO680_BL_POWER);
+	gpio_free(GPIO_NR_TREO_BL_POWER);
 }
 
-static struct platform_pwm_backlight_data treo680_backlight_data = {
+static struct platform_pwm_backlight_data treo_backlight_data = {
 	.pwm_id		= 0,
-	.max_brightness	= TREO680_MAX_INTENSITY,
-	.dft_brightness	= TREO680_DEFAULT_INTENSITY,
-	.pwm_period_ns	= TREO680_PERIOD_NS,
-	.init		= treo680_backlight_init,
-	.notify		= treo680_backlight_notify,
-	.exit		= treo680_backlight_exit,
+	.max_brightness	= TREO_MAX_INTENSITY,
+	.dft_brightness	= TREO_DEFAULT_INTENSITY,
+	.pwm_period_ns	= TREO_PERIOD_NS,
+	.init		= treo_backlight_init,
+	.notify		= treo_backlight_notify,
+	.exit		= treo_backlight_exit,
 };
 
-static struct platform_device treo680_backlight = {
+static struct platform_device treo_backlight = {
 	.name	= "pwm-backlight",
 	.dev	= {
 		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &treo680_backlight_data,
+		.platform_data	= &treo_backlight_data,
 	},
 };
 
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static struct pxaficp_platform_data treo680_ficp_info = {
-	.gpio_pwdown		= GPIO_NR_TREO680_IR_EN,
+static struct pxaficp_platform_data treo_ficp_info = {
+	.gpio_pwdown		= GPIO_NR_TREO_IR_EN,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info treo680_udc_info __initdata = {
-	.gpio_vbus		= GPIO_NR_TREO680_USB_DETECT,
+static struct pxa2xx_udc_mach_info treo_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_TREO_USB_DETECT,
 	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_TREO680_USB_PULLUP,
+	.gpio_pullup		= GPIO_NR_TREO_USB_PULLUP,
 };
 
 
 /******************************************************************************
  * USB host
  ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
 static struct pxaohci_platform_data treo680_ohci_info = {
 	.port_mode    = PMM_PERPORT_MODE,
 	.flags        = ENABLE_PORT1 | ENABLE_PORT3,
 	.power_budget = 0,
 };
+#endif /* CONFIG_MACH_TREO680 */
 
 /******************************************************************************
  * Power supply
@@ -326,41 +440,41 @@ static int power_supply_init(struct device *dev)
 {
 	int ret;
 
-	ret = gpio_request(GPIO_NR_TREO680_POWER_DETECT, "CABLE_STATE_AC");
+	ret = gpio_request(GPIO_NR_TREO_POWER_DETECT, "CABLE_STATE_AC");
 	if (ret)
 		goto err1;
-	ret = gpio_direction_input(GPIO_NR_TREO680_POWER_DETECT);
+	ret = gpio_direction_input(GPIO_NR_TREO_POWER_DETECT);
 	if (ret)
 		goto err2;
 
 	return 0;
 
 err2:
-	gpio_free(GPIO_NR_TREO680_POWER_DETECT);
+	gpio_free(GPIO_NR_TREO_POWER_DETECT);
 err1:
 	return ret;
 }
 
-static int treo680_is_ac_online(void)
+static int treo_is_ac_online(void)
 {
-	return gpio_get_value(GPIO_NR_TREO680_POWER_DETECT);
+	return gpio_get_value(GPIO_NR_TREO_POWER_DETECT);
 }
 
 static void power_supply_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_TREO680_POWER_DETECT);
+	gpio_free(GPIO_NR_TREO_POWER_DETECT);
 }
 
-static char *treo680_supplicants[] = {
+static char *treo_supplicants[] = {
 	"main-battery",
 };
 
 static struct pda_power_pdata power_supply_info = {
 	.init		 = power_supply_init,
-	.is_ac_online    = treo680_is_ac_online,
+	.is_ac_online    = treo_is_ac_online,
 	.exit		 = power_supply_exit,
-	.supplied_to     = treo680_supplicants,
-	.num_supplicants = ARRAY_SIZE(treo680_supplicants),
+	.supplied_to     = treo_supplicants,
+	.num_supplicants = ARRAY_SIZE(treo_supplicants),
 };
 
 static struct platform_device power_supply = {
@@ -374,7 +488,8 @@ static struct platform_device power_supply = {
 /******************************************************************************
  * Vibra and LEDs
  ******************************************************************************/
-static struct gpio_led gpio_leds[] = {
+#ifdef CONFIG_MACH_TREO680
+static struct gpio_led treo680_gpio_leds[] = {
 	{
 		.name			= "treo680:vibra:vibra",
 		.default_trigger	= "none",
@@ -383,34 +498,68 @@ static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "treo680:green:led",
 		.default_trigger	= "mmc0",
-		.gpio			= GPIO_NR_TREO680_GREEN_LED,
+		.gpio			= GPIO_NR_TREO_GREEN_LED,
 	},
 	{
-		.name			= "treo680:keybbl:keybbl",
+		.name			= "treo680:white:keybbl",
 		.default_trigger	= "none",
 		.gpio			= GPIO_NR_TREO680_KEYB_BL,
 	},
 };
 
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
+static struct gpio_led_platform_data treo680_gpio_led_info = {
+	.leds		= treo680_gpio_leds,
+	.num_leds	= ARRAY_SIZE(treo680_gpio_leds),
 };
 
 static struct platform_device treo680_leds = {
 	.name   = "leds-gpio",
 	.id     = -1,
 	.dev    = {
-		.platform_data  = &gpio_led_info,
+		.platform_data  = &treo680_gpio_led_info,
 	}
 };
+#endif /* CONFIG_MACH_TREO680 */
 
+#ifdef CONFIG_MACH_CENTRO
+static struct gpio_led centro_gpio_leds[] = {
+	{
+		.name			= "centro:vibra:vibra",
+		.default_trigger	= "none",
+		.gpio			= GPIO_NR_CENTRO_VIBRATE_EN,
+	},
+	{
+		.name			= "centro:green:led",
+		.default_trigger	= "mmc0",
+		.gpio			= GPIO_NR_TREO_GREEN_LED,
+	},
+	{
+		.name			= "centro:white:keybbl",
+		.default_trigger	= "none",
+		.active_low		= 1,
+		.gpio			= GPIO_NR_CENTRO_KEYB_BL,
+	},
+};
+
+static struct gpio_led_platform_data centro_gpio_led_info = {
+	.leds		= centro_gpio_leds,
+	.num_leds	= ARRAY_SIZE(centro_gpio_leds),
+};
+
+static struct platform_device centro_leds = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &centro_gpio_led_info,
+	}
+};
+#endif /* CONFIG_MACH_CENTRO */
 
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
 /* TODO: add support for 324x324 */
-static struct pxafb_mode_info treo680_lcd_modes[] = {
+static struct pxafb_mode_info treo_lcd_modes[] = {
 {
 	.pixclock		= 86538,
 	.xres			= 320,
@@ -427,21 +576,21 @@ static struct pxafb_mode_info treo680_lcd_modes[] = {
 },
 };
 
-static void treo680_lcd_power(int on, struct fb_var_screeninfo *info)
+static void treo_lcd_power(int on, struct fb_var_screeninfo *info)
 {
-	gpio_set_value(GPIO_NR_TREO680_BL_POWER, on);
+	gpio_set_value(GPIO_NR_TREO_BL_POWER, on);
 }
 
-static struct pxafb_mach_info treo680_lcd_screen = {
-	.modes		= treo680_lcd_modes,
-	.num_modes	= ARRAY_SIZE(treo680_lcd_modes),
+static struct pxafb_mach_info treo_lcd_screen = {
+	.modes		= treo_lcd_modes,
+	.num_modes	= ARRAY_SIZE(treo_lcd_modes),
 	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-static void __init treo680_pm_init(void)
+static void __init treo_pm_init(void)
 {
 	static u32 resume[] = {
 		0xe3a00101,	/* mov	r0,	#0x40000000 */
@@ -450,70 +599,118 @@ static void __init treo680_pm_init(void)
 	};
 
 	/* this is where the bootloader jumps */
-	memcpy(phys_to_virt(TREO680_STR_BASE), resume, sizeof(resume));
+	memcpy(phys_to_virt(TREO_STR_BASE), resume, sizeof(resume));
 }
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-	&treo680_backlight,
-	&treo680_leds,
+static struct platform_device *treo_devices[] __initdata = {
+	&treo_backlight,
 	&power_supply,
 };
 
+#ifdef CONFIG_MACH_TREO680
+static struct platform_device *treo680_devices[] __initdata = {
+	&treo680_leds,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static struct platform_device *centro_devices[] __initdata = {
+	&centro_leds,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
 /* setup udc GPIOs initial state */
-static void __init treo680_udc_init(void)
+static void __init treo_udc_init(void)
 {
-	if (!gpio_request(GPIO_NR_TREO680_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_TREO680_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_TREO680_USB_PULLUP);
+	if (!gpio_request(GPIO_NR_TREO_USB_PULLUP, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_TREO_USB_PULLUP, 1);
+		gpio_free(GPIO_NR_TREO_USB_PULLUP);
 	}
 }
 
-static void __init treo680_lcd_power_init(void)
+static void __init treo_lcd_power_init(void)
 {
 	int ret;
 
-	ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
+	ret = gpio_request(GPIO_NR_TREO_LCD_POWER, "LCD POWER");
 	if (ret) {
 		pr_err("Treo680: LCD power GPIO request failed!\n");
 		return;
 	}
 
-	ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
+	ret = gpio_direction_output(GPIO_NR_TREO_LCD_POWER, 0);
 	if (ret) {
 		pr_err("Treo680: setting LCD power GPIO direction failed!\n");
-		gpio_free(GPIO_NR_TREO680_LCD_POWER);
+		gpio_free(GPIO_NR_TREO_LCD_POWER);
 		return;
 	}
 
-	treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power;
+	treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
 }
 
+static void __init treo_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	treo_pm_init();
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
+	treo_lcd_power_init();
+	set_pxa_fb_info(&treo_lcd_screen);
+	treo_udc_init();
+	pxa_set_udc_info(&treo_udc_info);
+	pxa_set_ac97_info(&treo_ac97_pdata);
+	pxa_set_ficp_info(&treo_ficp_info);
+
+	platform_add_devices(ARRAY_AND_SIZE(treo_devices));
+}
+
+#ifdef CONFIG_MACH_TREO680
 static void __init treo680_init(void)
 {
-	treo680_pm_init();
+	treo_init();
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
-	pxa_set_keypad_info(&treo680_keypad_platform_data);
-	treo680_lcd_power_init();
-	set_pxa_fb_info(&treo680_lcd_screen);
 	pxa_set_mci_info(&treo680_mci_platform_data);
-	treo680_udc_init();
-	pxa_set_udc_info(&treo680_udc_info);
-	pxa_set_ac97_info(&treo680_ac97_pdata);
-	pxa_set_ficp_info(&treo680_ficp_info);
+	pxa_set_keypad_info(&treo680_keypad_platform_data);
 	pxa_set_ohci_info(&treo680_ohci_info);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(treo680_devices));
 }
 
 MACHINE_START(TREO680, "Palm Treo 680")
-	.phys_io	= TREO680_PHYS_IO_START,
-	.io_pg_offst	= io_p2v(0x40000000),
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa27x_init_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= treo680_init,
+	.phys_io        = TREO_PHYS_IO_START,
+	.io_pg_offst    = io_p2v(0x40000000),
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = treo680_init,
+MACHINE_END
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static void __init centro_init(void)
+{
+	treo_init();
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
+	pxa_set_mci_info(&centro_mci_platform_data);
+
+	pxa_set_keypad_info(&centro_keypad_platform_data);
+
+	platform_add_devices(ARRAY_AND_SIZE(centro_devices));
+}
+
+MACHINE_START(CENTRO, "Palm Centro 685")
+	.phys_io        = TREO_PHYS_IO_START,
+	.io_pg_offst    = io_p2v(0x40000000),
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+       .init_machine   = centro_init,
 MACHINE_END
+#endif /* CONFIG_MACH_CENTRO */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 76a2b37eaf30..7bf18c2f002f 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -570,6 +570,10 @@ static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	palmtx_pm_init();
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index c2bf493c5f53..d787ac7cfdd8 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -491,6 +491,10 @@ static void __init palmz72_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	set_pxa_fb_info(&palmz72_lcd_screen);
 	pxa_set_mci_info(&palmz72_mci_platform_data);
 	palmz72_udc_init();
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 6abfa2979c61..2190af066470 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -227,6 +227,10 @@ static void __init pcm027_init(void)
 
 	pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	/* at last call the baseboard to initialize itself */
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index bbda57078e0f..d5255ae74fe3 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -359,19 +359,12 @@ static unsigned long pcm990_camera_pin_config[] = {
 	GPIO44_CIF_LV,
 };
 
-static int pcm990_pxacamera_init(struct device *dev)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
-	return 0;
-}
-
 /*
  * CICR4: PCLK_EN:	Pixel clock is supplied by the sensor
  *	MCLK_EN:	Master clock is generated by PXA
  *	PCP:		Data sampled on the falling edge of pixel clock
  */
 struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
-	.init	= pcm990_pxacamera_init,
 	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 |
 		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/,
 	.mclk_10khz = 1000,
@@ -532,6 +525,7 @@ void __init pcm990_baseboard_init(void)
 	pxa_set_ac97_info(NULL);
 
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
 	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index a186994f77fb..e5eeb3a62d01 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -449,6 +449,10 @@ static void __init poodle_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_scoop_config = &poodle_pcmcia_config;
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 77c2693cfeef..2c1b0b70d01d 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -322,9 +322,6 @@ void __init pxa26x_init_irq(void)
 
 static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_udc,
-	&pxa_device_ffuart,
-	&pxa_device_btuart,
-	&pxa_device_stuart,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa25x_device_ssp,
@@ -372,10 +369,8 @@ static int __init pxa25x_init(void)
 	}
 
 	/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
-	if (cpu_is_pxa255()) {
+	if (cpu_is_pxa255())
 		clks_register(&pxa25x_hwuart_clkreg, 1);
-		ret = platform_device_register(&pxa_device_hwuart);
-	}
 
 	return ret;
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index ec68cc16b4e3..6a0b73167e03 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -364,9 +364,6 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 
 static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_udc,
-	&pxa_device_ffuart,
-	&pxa_device_btuart,
-	&pxa_device_stuart,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 09b7b1a10cad..fcb0721f4669 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -30,6 +30,7 @@
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/ssp.h>
+#include <mach/regs-intc.h>
 #include <plat/i2c.h>
 
 #include "generic.h"
@@ -45,6 +46,9 @@
 #define ACCR_D0CS	(1 << 26)
 #define ACCR_PCCE	(1 << 11)
 
+#define PECR_IE(n)	((1 << ((n) * 2)) << 28)
+#define PECR_IS(n)	((1 << ((n) * 2)) << 29)
+
 /* crystal frequency to static memory controller multiplier (SMCFS) */
 static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
 
@@ -237,6 +241,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
 static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5);
 static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0);
@@ -261,6 +266,7 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
 	INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
+	INIT_CLKREG(&clk_pxa3xx_u2d, NULL, "U2DCLK"),
 	INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
@@ -530,6 +536,43 @@ static inline void pxa3xx_init_pm(void) {}
 #define pxa3xx_set_wake	NULL
 #endif
 
+static void pxa_ack_ext_wakeup(unsigned int irq)
+{
+	PECR |= PECR_IS(irq - IRQ_WAKEUP0);
+}
+
+static void pxa_mask_ext_wakeup(unsigned int irq)
+{
+	ICMR2 &= ~(1 << ((irq - PXA_IRQ(0)) & 0x1f));
+	PECR &= ~PECR_IE(irq - IRQ_WAKEUP0);
+}
+
+static void pxa_unmask_ext_wakeup(unsigned int irq)
+{
+	ICMR2 |= 1 << ((irq - PXA_IRQ(0)) & 0x1f);
+	PECR |= PECR_IE(irq - IRQ_WAKEUP0);
+}
+
+static struct irq_chip pxa_ext_wakeup_chip = {
+	.name		= "WAKEUP",
+	.ack		= pxa_ack_ext_wakeup,
+	.mask		= pxa_mask_ext_wakeup,
+	.unmask		= pxa_unmask_ext_wakeup,
+};
+
+static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
+{
+	int irq;
+
+	for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
+		set_irq_chip(irq, &pxa_ext_wakeup_chip);
+		set_irq_handler(irq, handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	pxa_ext_wakeup_chip.set_wake = fn;
+}
+
 void __init pxa3xx_init_irq(void)
 {
 	/* enable CP6 access */
@@ -539,6 +582,7 @@ void __init pxa3xx_init_irq(void)
 	__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
 
 	pxa_init_irq(56, pxa3xx_set_wake);
+	pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
 	pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
 }
 
@@ -553,9 +597,6 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 
 static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_udc,
-	&pxa_device_ffuart,
-	&pxa_device_btuart,
-	&pxa_device_stuart,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 8241a63ea589..115b6f234bdd 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -22,9 +22,13 @@
 #include <linux/i2c.h>
 #include <linux/smc91x.h>
 #include <linux/mfd/da903x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 
 #include <mach/pxa930.h>
 #include <plat/i2c.h>
@@ -33,7 +37,7 @@
 #include "devices.h"
 #include "generic.h"
 
-#define GPIO_LCD_RESET	(16)
+#define GPIO_LCD_RESET		(16)
 
 /* SAAR MFP configurations */
 static mfp_cfg_t saar_mfp_cfg[] __initdata = {
@@ -56,6 +60,31 @@ static mfp_cfg_t saar_mfp_cfg[] __initdata = {
 	/* Ethernet */
 	DF_nCS1_nCS3,
 	GPIO97_GPIO,
+
+	/* DFI */
+	DF_INT_RnB_ND_INT_RnB,
+	DF_nRE_nOE_ND_nRE,
+	DF_nWE_ND_nWE,
+	DF_CLE_nOE_ND_CLE,
+	DF_nADV1_ALE_ND_ALE,
+	DF_nADV2_ALE_nCS3,
+	DF_nCS0_ND_nCS0,
+	DF_IO0_ND_IO0,
+	DF_IO1_ND_IO1,
+	DF_IO2_ND_IO2,
+	DF_IO3_ND_IO3,
+	DF_IO4_ND_IO4,
+	DF_IO5_ND_IO5,
+	DF_IO6_ND_IO6,
+	DF_IO7_ND_IO7,
+	DF_IO8_ND_IO8,
+	DF_IO9_ND_IO9,
+	DF_IO10_ND_IO10,
+	DF_IO11_ND_IO11,
+	DF_IO12_ND_IO12,
+	DF_IO13_ND_IO13,
+	DF_IO14_ND_IO14,
+	DF_IO15_ND_IO15,
 };
 
 #define SAAR_ETH_PHYS	(0x14000000)
@@ -451,10 +480,15 @@ static inline void saar_init_lcd(void) {}
 #endif
 
 #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct da9034_backlight_pdata saar_da9034_backlight = {
+	.output_current	= 4,	/* 4mA */
+};
+
 static struct da903x_subdev_info saar_da9034_subdevs[] = {
 	[0] = {
 		.name		= "da903x-backlight",
 		.id		= DA9034_ID_WLED,
+		.platform_data	= &saar_da9034_backlight,
 	},
 };
 
@@ -480,12 +514,81 @@ static void __init saar_init_i2c(void)
 #else
 static inline void saar_init_i2c(void) {}
 #endif
+
+#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
+static struct mtd_partition saar_onenand_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_8M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= (SZ_2M + SZ_1M),
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_48M,
+		.mask_flags	= 0,
+	}
+};
+
+static struct onenand_platform_data saar_onenand_info = {
+	.parts		= saar_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(saar_onenand_partitions),
+};
+
+#define SMC_CS0_PHYS_BASE	(0x10000000)
+
+static struct resource saar_resource_onenand[] = {
+	[0] = {
+		.start	= SMC_CS0_PHYS_BASE,
+		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device saar_device_onenand = {
+	.name		= "onenand-flash",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &saar_onenand_info,
+	},
+	.resource	= saar_resource_onenand,
+	.num_resources	= ARRAY_SIZE(saar_resource_onenand),
+};
+
+static void __init saar_init_onenand(void)
+{
+	platform_device_register(&saar_device_onenand);
+}
+#else
+static void __init saar_init_onenand(void) {}
+#endif
+
 static void __init saar_init(void)
 {
 	/* initialize MFP configurations */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_device_register(&smc91x_device);
+	saar_init_onenand();
 
 	saar_init_i2c();
 	saar_init_lcd();
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 55259f4756c8..1439785d3979 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -42,8 +42,8 @@ void corgi_lcdtg_hw_init(int mode);
 #define MAX1111_BATT_TEMP   2u
 #define MAX1111_ACIN_VOLT   6u
 
-extern struct battery_thresh spitz_battery_levels_acin[];
-extern struct battery_thresh spitz_battery_levels_noac[];
+extern struct battery_thresh sharpsl_battery_levels_acin[];
+extern struct battery_thresh sharpsl_battery_levels_noac[];
 int sharpsl_pm_pxa_read_max1111(int channel);
 
 
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 629e05d1196e..67229a1ef55c 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -78,7 +78,7 @@ DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
 
 
 
-struct battery_thresh spitz_battery_levels_acin[] = {
+struct battery_thresh sharpsl_battery_levels_acin[] = {
 	{ 213, 100},
 	{ 212,  98},
 	{ 211,  95},
@@ -121,7 +121,7 @@ struct battery_thresh spitz_battery_levels_acin[] = {
 	{   0,   0},
 };
 
-struct battery_thresh  spitz_battery_levels_noac[] = {
+struct battery_thresh sharpsl_battery_levels_noac[] = {
 	{ 213, 100},
 	{ 212,  98},
 	{ 211,  95},
@@ -165,19 +165,20 @@ struct battery_thresh  spitz_battery_levels_noac[] = {
 };
 
 /* MAX1111 Commands */
-#define MAXCTRL_PD0      1u << 0
-#define MAXCTRL_PD1      1u << 1
-#define MAXCTRL_SGL      1u << 2
-#define MAXCTRL_UNI      1u << 3
+#define MAXCTRL_PD0      (1u << 0)
+#define MAXCTRL_PD1      (1u << 1)
+#define MAXCTRL_SGL      (1u << 2)
+#define MAXCTRL_UNI      (1u << 3)
 #define MAXCTRL_SEL_SH   4
-#define MAXCTRL_STR      1u << 7
+#define MAXCTRL_STR      (1u << 7)
 
 /*
  * Read MAX1111 ADC
  */
 int sharpsl_pm_pxa_read_max1111(int channel)
 {
-	if (machine_is_tosa()) // Ugly, better move this function into another module
+	/* Ugly, better move this function into another module */
+	if (machine_is_tosa())
 	    return 0;
 
 #ifdef CONFIG_CORGI_SSP_DEPRECATED
@@ -238,7 +239,7 @@ EXPORT_SYMBOL(sharpsl_battery_kick);
 
 static void sharpsl_battery_thread(struct work_struct *private_)
 {
-	int voltage, percent, apm_status, i = 0;
+	int voltage, percent, apm_status, i;
 
 	if (!sharpsl_pm.machinfo)
 		return;
@@ -250,15 +251,14 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
 		schedule_delayed_work(&toggle_charger, 0);
 
-	while(1) {
+	for (i = 0; i < 5; i++) {
 		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-
-		if (voltage > 0) break;
-		if (i++ > 5) {
-			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
-			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+		if (voltage > 0)
 			break;
-		}
+	}
+	if (voltage <= 0) {
+		voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+		dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
 	}
 
 	voltage = sharpsl_average_value(voltage);
@@ -266,8 +266,10 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 	percent = get_percentage(voltage);
 
 	/* At low battery voltages, the voltage has a tendency to start
-           creeping back up so we try to avoid this here */
-	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
+	   creeping back up so we try to avoid this here */
+	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
+	    || (apm_status == APM_BATTERY_STATUS_HIGH)
+	    || percent <= sharpsl_pm.battstat.mainbat_percent) {
 		sharpsl_pm.battstat.mainbat_voltage = voltage;
 		sharpsl_pm.battstat.mainbat_status = apm_status;
 		sharpsl_pm.battstat.mainbat_percent = percent;
@@ -279,8 +281,8 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 #ifdef CONFIG_BACKLIGHT_CORGI
 	/* If battery is low. limit backlight intensity to save power. */
 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
-			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+	    && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
+	    || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
 		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
 			sharpsl_pm.machinfo->backlight_limit(1);
 			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
@@ -293,8 +295,8 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 
 	/* Suspend if critical battery level */
 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
-			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+	     && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+	     && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
 		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
 		dev_err(sharpsl_pm.dev, "Fatal Off\n");
 		apm_queue_event(APM_CRITICAL_SUSPEND);
@@ -346,7 +348,7 @@ static void sharpsl_charge_error(void)
 
 static void sharpsl_charge_toggle(struct work_struct *private_)
 {
-	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+	dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
 
 	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
 		sharpsl_charge_off();
@@ -368,7 +370,7 @@ static void sharpsl_ac_timer(unsigned long data)
 {
 	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
 
-	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
 
 	sharpsl_average_clear();
 	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
@@ -472,14 +474,14 @@ static int sharpsl_average_value(int ad)
 	sharpsl_ad[sharpsl_ad_index] = ad;
 	sharpsl_ad_index++;
 	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
-		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+		for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
 			sharpsl_ad[i] = sharpsl_ad[i+1];
 		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
 	}
-	for (i=0; i < sharpsl_ad_index; i++)
+	for (i = 0; i < sharpsl_ad_index; i++)
 		ad_val += sharpsl_ad[i];
 
-	return (ad_val / sharpsl_ad_index);
+	return ad_val / sharpsl_ad_index;
 }
 
 /*
@@ -492,8 +494,8 @@ static int get_select_val(int *val)
 
 	/* Find MAX val */
 	temp = val[0];
-	j=0;
-	for (i=1; i<5; i++) {
+	j = 0;
+	for (i = 1; i < 5; i++) {
 		if (temp < val[i]) {
 			temp = val[i];
 			j = i;
@@ -502,21 +504,21 @@ static int get_select_val(int *val)
 
 	/* Find MIN val */
 	temp = val[4];
-	k=4;
-	for (i=3; i>=0; i--) {
+	k = 4;
+	for (i = 3; i >= 0; i--) {
 		if (temp > val[i]) {
 			temp = val[i];
 			k = i;
 		}
 	}
 
-	for (i=0; i<5; i++)
-		if (i != j && i != k )
+	for (i = 0; i < 5; i++)
+		if (i != j && i != k)
 			sum += val[i];
 
 	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
 
-	return (sum/3);
+	return sum/3;
 }
 
 static int sharpsl_check_battery_temp(void)
@@ -524,7 +526,7 @@ static int sharpsl_check_battery_temp(void)
 	int val, i, buff[5];
 
 	/* Check battery temperature */
-	for (i=0; i<5; i++) {
+	for (i = 0; i < 5; i++) {
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
 		sharpsl_pm.machinfo->measure_temp(1);
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
@@ -557,7 +559,7 @@ static int sharpsl_check_battery_voltage(void)
 		sharpsl_pm.machinfo->discharge1(1);
 
 	/* Check battery voltage */
-	for (i=0; i<5; i++) {
+	for (i = 0; i < 5; i++) {
 		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
 	}
@@ -581,16 +583,16 @@ static int sharpsl_ac_check(void)
 {
 	int temp, i, buff[5];
 
-	for (i=0; i<5; i++) {
+	for (i = 0; i < 5; i++) {
 		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
 	}
 
 	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
 
 	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
-		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+		dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
 		return -1;
 	}
 
@@ -624,9 +626,9 @@ static int sharpsl_pm_resume(struct platform_device *pdev)
 
 static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
 {
-	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
 
-	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
 	/* not charging and AC-IN! */
 
 	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
@@ -644,12 +646,12 @@ static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable
 	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
 		RTSR &= RTSR_ALE;
 		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
-		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
 		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
 	} else if (alarm_enable) {
 		RTSR &= RTSR_ALE;
 		RTAR = alarm_time;
-		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
 	} else {
 		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
 	}
@@ -658,19 +660,18 @@ static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable
 
 	sharpsl_pm.machinfo->postsuspend();
 
-	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
 }
 
 static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
 {
-	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
-	{
+	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
 		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
 			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
 			corgi_goto_sleep(alarm_time, alarm_enable, state);
 			return 1;
 		}
-		if(sharpsl_off_charge_battery()) {
+		if (sharpsl_off_charge_battery()) {
 			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
 			corgi_goto_sleep(alarm_time, alarm_enable, state);
 			return 1;
@@ -697,7 +698,7 @@ static int corgi_pxa_pm_enter(suspend_state_t state)
 
 	corgi_goto_sleep(alarm_time, alarm_status, state);
 
-	while (corgi_enter_suspend(alarm_time,alarm_status,state))
+	while (corgi_enter_suspend(alarm_time, alarm_status, state))
 		{}
 
 	if (sharpsl_pm.machinfo->earlyresume)
@@ -732,7 +733,7 @@ static int sharpsl_fatal_check(void)
 		sharpsl_pm.machinfo->discharge1(1);
 
 	/* Check battery : check inserting battery ? */
-	for (i=0; i<5; i++) {
+	for (i = 0; i < 5; i++) {
 		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
 	}
@@ -812,7 +813,7 @@ static int sharpsl_off_charge_battery(void)
 		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
 
 		time = RCNR;
-		while(1) {
+		while (1) {
 			/* Check if any wakeup event had occurred */
 			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
 				return 0;
@@ -835,9 +836,9 @@ static int sharpsl_off_charge_battery(void)
 	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
 
 	time = RCNR;
-	while(1) {
+	while (1) {
 		/* Check if any wakeup event had occurred */
-		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+		if (sharpsl_pm.machinfo->charger_wakeup())
 			return 0;
 		/* Check for timeout */
 		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
@@ -864,12 +865,12 @@ static int sharpsl_off_charge_battery(void)
 
 static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
 }
 
 static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
 }
 
 static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
@@ -943,8 +944,7 @@ static int __init sharpsl_pm_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (sharpsl_pm.machinfo->batfull_irq)
-	{
+	if (sharpsl_pm.machinfo->batfull_irq) {
 		/* Register interrupt handler. */
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index d98023f55503..4b50f144fa48 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -768,6 +768,10 @@ static void __init common_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	spitz_init_spi();
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 724ffb030317..fc5a70c40358 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -103,7 +103,7 @@ static void spitz_presuspend(void)
 	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
 	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
 	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
-	PKSR = 0xffffffff; // clear
+	PKSR = 0xffffffff; /* clear */
 
 	/* nRESET_OUT Disable */
 	PSLR |= PSLR_SL_ROD;
@@ -149,7 +149,7 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
 	if (resume_on_alarm && (PEDR & PWER_RTC))
 		is_resume |= PWER_RTC;
 
-	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
+	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n", is_resume);
 	return is_resume;
 }
 
@@ -160,7 +160,7 @@ static unsigned long spitz_charger_wakeup(void)
 
 unsigned long spitzpm_read_devdata(int type)
 {
-	switch(type) {
+	switch (type) {
 	case SHARPSL_STATUS_ACIN:
 		return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
 	case SHARPSL_STATUS_LOCK:
@@ -199,7 +199,7 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 #if defined(CONFIG_LCD_CORGI)
 	.backlight_limit = corgi_lcd_limit_intensity,
 #elif defined(CONFIG_BACKLIGHT_CORGI)
-        .backlight_limit  = corgibl_limit_intensity,
+	.backlight_limit  = corgibl_limit_intensity,
 #endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
 	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
@@ -208,8 +208,8 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
 	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
 	.bat_levels       = 40,
-	.bat_levels_noac  = spitz_battery_levels_noac,
-	.bat_levels_acin  = spitz_battery_levels_acin,
+	.bat_levels_noac  = sharpsl_battery_levels_noac,
+	.bat_levels_acin  = sharpsl_battery_levels_acin,
 	.status_high_acin = 188,
 	.status_low_acin  = 178,
 	.status_high_noac = 185,
@@ -241,7 +241,7 @@ static int __devinit spitzpm_init(void)
 
 static void spitzpm_exit(void)
 {
- 	platform_device_unregister(spitzpm_device);
+	platform_device_unregister(spitzpm_device);
 }
 
 module_init(spitzpm_init);
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 965e38c6bafe..9ebe658590fa 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -342,8 +342,9 @@ void ssp_free(struct ssp_device *ssp)
 }
 EXPORT_SYMBOL(ssp_free);
 
-static int __devinit ssp_probe(struct platform_device *pdev, int type)
+static int __devinit ssp_probe(struct platform_device *pdev)
 {
+	const struct platform_device_id *id = platform_get_device_id(pdev);
 	struct resource *res;
 	struct ssp_device *ssp;
 	int ret = 0;
@@ -413,7 +414,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
 	 */
 	ssp->port_id = pdev->id + 1;
 	ssp->use_count = 0;
-	ssp->type = type;
+	ssp->type = (int)id->driver_data;
 
 	mutex_lock(&ssp_lock);
 	list_add(&ssp->node, &ssp_list);
@@ -457,75 +458,31 @@ static int __devexit ssp_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devinit pxa25x_ssp_probe(struct platform_device *pdev)
-{
-	return ssp_probe(pdev, PXA25x_SSP);
-}
-
-static int __devinit pxa25x_nssp_probe(struct platform_device *pdev)
-{
-	return ssp_probe(pdev, PXA25x_NSSP);
-}
-
-static int __devinit pxa27x_ssp_probe(struct platform_device *pdev)
-{
-	return ssp_probe(pdev, PXA27x_SSP);
-}
-
-static struct platform_driver pxa25x_ssp_driver = {
-	.driver		= {
-		.name	= "pxa25x-ssp",
-	},
-	.probe		= pxa25x_ssp_probe,
-	.remove		= __devexit_p(ssp_remove),
+static const struct platform_device_id ssp_id_table[] = {
+	{ "pxa25x-ssp",		PXA25x_SSP },
+	{ "pxa25x-nssp",	PXA25x_NSSP },
+	{ "pxa27x-ssp",		PXA27x_SSP },
+	{ },
 };
 
-static struct platform_driver pxa25x_nssp_driver = {
-	.driver		= {
-		.name	= "pxa25x-nssp",
-	},
-	.probe		= pxa25x_nssp_probe,
+static struct platform_driver ssp_driver = {
+	.probe		= ssp_probe,
 	.remove		= __devexit_p(ssp_remove),
-};
-
-static struct platform_driver pxa27x_ssp_driver = {
 	.driver		= {
-		.name	= "pxa27x-ssp",
+		.owner	= THIS_MODULE,
+		.name	= "pxa2xx-ssp",
 	},
-	.probe		= pxa27x_ssp_probe,
-	.remove		= __devexit_p(ssp_remove),
+	.id_table	= ssp_id_table,
 };
 
 static int __init pxa_ssp_init(void)
 {
-	int ret = 0;
-
-	ret = platform_driver_register(&pxa25x_ssp_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa25x_ssp_driver");
-		return ret;
-	}
-
-	ret = platform_driver_register(&pxa25x_nssp_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa25x_nssp_driver");
-		return ret;
-	}
-
-	ret = platform_driver_register(&pxa27x_ssp_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa27x_ssp_driver");
-		return ret;
-	}
-
-	return ret;
+	return platform_driver_register(&ssp_driver);
 }
 
 static void __exit pxa_ssp_exit(void)
 {
-	platform_driver_unregister(&pxa25x_ssp_driver);
-	platform_driver_unregister(&pxa25x_nssp_driver);
-	platform_driver_unregister(&pxa27x_ssp_driver);
+	platform_driver_unregister(&ssp_driver);
 }
 
 arch_initcall(pxa_ssp_init);
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 3b205b69f3fb..a98a434f0111 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -760,6 +760,10 @@ static void __init stargate2_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* spi chip selects */
 	gpio_direction_output(37, 0);
 	gpio_direction_output(24, 0);
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index b75353a2ec75..f02dcb5b4e97 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -477,6 +477,10 @@ static void __init tavorevb_init(void)
 	/* initialize MFP configurations */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_device_register(&smc91x_device);
 
 	tavorevb_init_lcd();
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index e81a52673d49..c854c168a451 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -825,6 +825,11 @@ static void __init tosa_init(void)
 	int dummy;
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 3981e0356d12..0aa858ebc573 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -524,6 +524,10 @@ static void __init trizeps4_init(void)
 					ARRAY_SIZE(trizeps4_devices));
 	}
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	if (0)	/* dont know how to determine LCD */
 		set_pxa_fb_info(&sharp_lcd);
 	else
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d33c232b686c..cf0d71b7797e 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -301,15 +301,6 @@ static void __init viper_init_irq(void)
 	set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
 				viper_irq_handler);
 	set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
-
-#ifndef CONFIG_SERIAL_PXA
-	/*
-	 * 8250 doesn't support IRQ_TYPE being passed as part
-	 * of the plat_serial8250_port structure...
-	 */
-	set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
-#endif
 }
 
 /* Flat Panel */
@@ -539,6 +530,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase	= VIPER_UARTA_PHYS,
 		.irq		= gpio_to_irq(VIPER_UARTA_GPIO),
+		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 1843200,
 		.regshift	= 1,
 		.iotype		= UPIO_MEM,
@@ -548,6 +540,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase	= VIPER_UARTB_PHYS,
 		.irq		= gpio_to_irq(VIPER_UARTB_GPIO),
+		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 1843200,
 		.regshift	= 1,
 		.iotype		= UPIO_MEM,
@@ -908,6 +901,10 @@ static void __init viper_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* Wake-up serial console */
 	viper_init_serial_gpio();
 
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 3fd79cbb36c8..d3b4e3f2e033 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -165,6 +165,11 @@ static void __init xcep_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	pxa_set_hwuart_info(NULL);
+
 	/* See Intel XScale Developer's Guide for details */
 	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
 	MSC1 = (MSC1 & 0xffff) | 0xD5540000;
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 09784d3954e4..b66e9e2d06e7 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -31,7 +31,7 @@
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -444,6 +444,10 @@ static inline void zylonite_init_ohci(void) {}
 
 static void __init zylonite_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* board-processor specific initialization */
 	zylonite_pxa300_init();
 	zylonite_pxa320_init();
diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig
index deab0722836e..fdd8f5e96faf 100644
--- a/arch/arm/mach-s3c2400/Kconfig
+++ b/arch/arm/mach-s3c2400/Kconfig
@@ -1,13 +1,7 @@
-# arch/arm/mach-s3c2400/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
 
-
-
 menu "S3C2400 Machines"
 
-
 endmenu
-
diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h
index 1535540edc82..3fd889200e99 100644
--- a/arch/arm/mach-s3c2400/include/mach/map.h
+++ b/arch/arm/mach-s3c2400/include/mach/map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2400/include/mach/map.h
  *
- * Copyright 2003,2007  Simtec Electronics
+ * Copyright 2003-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 3d4e9da3fa52..554731868b07 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2410/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -81,6 +79,14 @@ config ARCH_H1940
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
+config H1940BT
+        tristate "Control the state of H1940 bluetooth chip"
+        depends on ARCH_H1940
+        select RFKILL
+        help
+          This is a simple driver that is able to control
+          the state of built in bluetooth chip on h1940.
+
 config PM_H1940
 	bool
 	help
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 2ab5ba4b266f..0d468e96e83e 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -21,7 +21,8 @@ obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 # Machine support
 
 obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o h1940-bluetooth.o
+obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o
+obj-$(CONFIG_H1940BT)		+= h1940-bluetooth.o
 obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
 obj-$(CONFIG_MACH_N30)		+= mach-n30.o
 obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 9a37c87152b0..217b102866d0 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/bast-irq.c
  *
- * Copyright (c) 2003,2005 Simtec Electronics
+ * Copyright 2003-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -141,7 +141,7 @@ static __init int bast_irq_init(void)
 	unsigned int i;
 
 	if (machine_is_bast()) {
-		printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n");
+		printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n");
 
 		/* zap all the IRQs */
 
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index 9d1186877d08..75189df995ae 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/cpu-freq.c
  *
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5aabf117cbb0..b7d1f8d27bc2 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -17,6 +17,7 @@
 #include <linux/ctype.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
+#include <linux/rfkill.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
@@ -24,21 +25,10 @@
 
 #define DRV_NAME              "h1940-bt"
 
-#ifdef CONFIG_LEDS_H1940
-DEFINE_LED_TRIGGER(bt_led_trigger);
-#endif
-
-static int state;
-
 /* Bluetooth control */
 static void h1940bt_enable(int on)
 {
 	if (on) {
-#ifdef CONFIG_LEDS_H1940
-		/* flashing Blue */
-		led_trigger_event(bt_led_trigger, LED_HALF);
-#endif
-
 		/* Power on the chip */
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
@@ -46,48 +36,31 @@ static void h1940bt_enable(int on)
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
-
-		state = 1;
 	}
 	else {
-#ifdef CONFIG_LEDS_H1940
-		led_trigger_event(bt_led_trigger, 0);
-#endif
-
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
-
-		state = 0;
 	}
 }
 
-static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf)
+static int h1940bt_set_block(void *data, bool blocked)
 {
-	return snprintf(buf, PAGE_SIZE, "%d\n", state);
+	h1940bt_enable(!blocked);
+	return 0;
 }
 
-static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int new_state;
-	char *endp;
-
-	new_state = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
-		return -EINVAL;
-
-	h1940bt_enable(new_state);
-
-	return count;
-}
-static DEVICE_ATTR(enable, 0644,
-		h1940bt_show,
-		h1940bt_store);
+static const struct rfkill_ops h1940bt_rfkill_ops = {
+	.set_block = h1940bt_set_block,
+};
 
 static int __init h1940bt_probe(struct platform_device *pdev)
 {
+	struct rfkill *rfk;
+	int ret = 0;
+
 	/* Configures BT serial port GPIOs */
 	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
 	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
@@ -98,21 +71,44 @@ static int __init h1940bt_probe(struct platform_device *pdev)
 	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
 	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
 
-#ifdef CONFIG_LEDS_H1940
-	led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
-#endif
 
-	/* disable BT by default */
-	h1940bt_enable(0);
+	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+			&h1940bt_rfkill_ops, NULL);
+	if (!rfk) {
+		ret = -ENOMEM;
+		goto err_rfk_alloc;
+	}
+
+	rfkill_set_led_trigger_name(rfk, "h1940-bluetooth");
+
+	ret = rfkill_register(rfk);
+	if (ret)
+		goto err_rfkill;
+
+	platform_set_drvdata(pdev, rfk);
+
+	return 0;
 
-	return device_create_file(&pdev->dev, &dev_attr_enable);
+err_rfkill:
+	rfkill_destroy(rfk);
+err_rfk_alloc:
+	return ret;
 }
 
 static int h1940bt_remove(struct platform_device *pdev)
 {
-#ifdef CONFIG_LEDS_H1940
-	led_trigger_unregister_simple(bt_led_trigger);
-#endif
+	struct rfkill *rfk = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (rfk) {
+		rfkill_unregister(rfk);
+		rfkill_destroy(rfk);
+	}
+	rfk = NULL;
+
+	h1940bt_enable(0);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
index 20493b048360..bee2a7a932a0 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * BAST - CPLD control constants
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
index 501c202b53cf..cac428c42e7f 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-irq.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine BAST - IRQ Number definitions
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h
index c2c5baf07345..6e7dc9d0cf0e 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-map.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine BAST - Memory map definitions
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
index 61684cb8ce59..4c38b39b741d 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 92e2687009ea..08ac5f96c012 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C24XX DMA support
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index 801dff13858d..035a493952db 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
  *
- * Copyright (c) 2003,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 - hardware
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
index 639eff523d4e..17380f848428 100644
--- a/arch/arm/mach-s3c2410/include/mach/osiris-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/osiris-map.h
  *
- * (c) 2005 Simtec Electronics
+ * Copyright 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index 2a5d90e957fb..9a0d169be137 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-clock.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index f6e8eec879c8..ebc85c6dadbf 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
- *		           http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
+ *	http://www.simtec.co.uk/products/SWLINUX/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h
index 2d36353f57d7..4932b87bdf3d 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-power.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-power.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index c9432103750d..72f756c5e504 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -1,7 +1,6 @@
-
 /* arch/arm/mach-s3c2410/include/mach/uncompress.h
  *
- * Copyright (c) 2003, 2007 Simtec Electronics
+ * Copyright (c) 2003-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
index f53f85b4ad8b..47add133b8ee 100644
--- a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine VR1000 - IRQ Number definitions
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 647c9adb018f..4c79ac8a6c33 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-bast.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -61,11 +61,12 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
+#include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
 
-#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
 
 /* macros for virtual address mods for the io space entries */
 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -247,7 +248,7 @@ static int chip0_map[] = { 1 };
 static int chip1_map[] = { 2 };
 static int chip2_map[] = { 3 };
 
-static struct mtd_partition bast_default_nand_part[] = {
+static struct mtd_partition __initdata bast_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -273,7 +274,7 @@ static struct mtd_partition bast_default_nand_part[] = {
  * socket.
 */
 
-static struct s3c2410_nand_set bast_nand_sets[] = {
+static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
 	[0] = {
 		.name		= "SmartMedia",
 		.nr_chips	= 1,
@@ -323,7 +324,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
 	__raw_writeb(tmp, BAST_VA_CTRL2);
 }
 
-static struct s3c2410_platform_nand bast_nand_info = {
+static struct s3c2410_platform_nand __initdata bast_nand_info = {
 	.tacls		= 30,
 	.twrph0		= 60,
 	.twrph1		= 60,
@@ -608,6 +609,11 @@ static struct s3c_cpufreq_board __initdata bast_cpufreq = {
 	.need_io	= 1,
 };
 
+static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
+	.have_mic	= 1,
+	.have_lout	= 1,
+};
+
 static void __init bast_map_io(void)
 {
 	/* initialise the clocks */
@@ -625,7 +631,6 @@ static void __init bast_map_io(void)
 
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
-	s3c_device_nand.dev.platform_data = &bast_nand_info;
 	s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
@@ -639,6 +644,7 @@ static void __init bast_init(void)
 	sysdev_register(&bast_pm_sysdev);
 
 	s3c_i2c0_set_platdata(&bast_i2c_info);
+	s3c_nand_set_platdata(&bast_nand_info);
 	s3c24xx_fb_set_platdata(&bast_fb_info);
 	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 
@@ -647,6 +653,7 @@ static void __init bast_init(void)
 
 	usb_simtec_init();
 	nor_simtec_init();
+	simtec_audio_add(NULL, true, &bast_audio);
 
 	s3c_cpufreq_setboard(&bast_cpufreq);
 }
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index d9cd5ddecf4a..49053254c98d 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -21,6 +21,11 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+#include <video/platform_lcd.h>
+
+#include <linux/mmc/host.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,9 +37,12 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 
+#include <mach/regs-gpio.h>
+#include <mach/gpio-fns.h>
+#include <mach/gpio-nrs.h>
+
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
@@ -46,6 +54,7 @@
 #include <plat/cpu.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
+#include <plat/mci.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
 	[0] = {
@@ -171,16 +180,90 @@ static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
 	.gpdup_mask=	0xffffffff,
 };
 
-static struct platform_device s3c_device_leds = {
+static struct platform_device h1940_device_leds = {
 	.name             = "h1940-leds",
 	.id               = -1,
 };
 
-static struct platform_device s3c_device_bluetooth = {
+static struct platform_device h1940_device_bluetooth = {
 	.name             = "h1940-bt",
 	.id               = -1,
 };
 
+static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+	.gpio_detect   = S3C2410_GPF(5),
+	.gpio_wprotect = S3C2410_GPH(8),
+	.set_power     = NULL,
+	.ocr_avail     = MMC_VDD_32_33,
+};
+
+static int h1940_backlight_init(struct device *dev)
+{
+	gpio_request(S3C2410_GPB(0), "Backlight");
+
+	s3c2410_gpio_setpin(S3C2410_GPB(0), 0);
+	s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+
+	return 0;
+}
+
+static void h1940_backlight_exit(struct device *dev)
+{
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/);
+}
+
+static struct platform_pwm_backlight_data backlight_data = {
+	.pwm_id         = 0,
+	.max_brightness = 100,
+	.dft_brightness = 50,
+	/* tcnt = 0x31 */
+	.pwm_period_ns  = 36296,
+	.init           = h1940_backlight_init,
+	.exit           = h1940_backlight_exit,
+};
+
+static struct platform_device h1940_backlight = {
+	.name = "pwm-backlight",
+	.dev  = {
+		.parent = &s3c_device_timer[0].dev,
+		.platform_data = &backlight_data,
+	},
+	.id   = -1,
+};
+
+static void h1940_lcd_power_set(struct plat_lcd_data *pd,
+					unsigned int power)
+{
+	int value;
+
+	if (!power) {
+		/* set to 3ec */
+		s3c2410_gpio_setpin(S3C2410_GPC(0), 0);
+		/* wait for 3ac */
+		do {
+			value = s3c2410_gpio_getpin(S3C2410_GPC(6));
+		} while (value);
+		/* set to 38c */
+		s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+	} else {
+		/* Set to 3ac */
+		s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+		/* Set to 3ad */
+		s3c2410_gpio_setpin(S3C2410_GPC(0), 1);
+	}
+}
+
+static struct plat_lcd_data h1940_lcd_power_data = {
+	.set_power      = h1940_lcd_power_set,
+};
+
+static struct platform_device h1940_lcd_powerdev = {
+	.name                   = "platform-lcd",
+	.dev.parent             = &s3c_device_lcd.dev,
+	.dev.platform_data      = &h1940_lcd_power_data,
+};
+
 static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
@@ -188,8 +271,13 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
-	&s3c_device_leds,
-	&s3c_device_bluetooth,
+	&h1940_device_leds,
+	&h1940_device_bluetooth,
+	&s3c_device_sdi,
+	&s3c_device_rtc,
+	&s3c_device_timer[0],
+	&h1940_backlight,
+	&h1940_lcd_powerdev,
 };
 
 static void __init h1940_map_io(void)
@@ -219,6 +307,8 @@ static void __init h1940_init(void)
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
+	s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
+
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
@@ -231,6 +321,11 @@ static void __init h1940_init(void)
 	      | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
 	writel(tmp, S3C2410_UPLLCON);
 
+	gpio_request(S3C2410_GPC(0), "LCD power");
+	gpio_request(S3C2410_GPC(5), "LCD power");
+	gpio_request(S3C2410_GPC(6), "LCD power");
+
+
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0f6ed61af415..0405712c2263 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -338,7 +338,7 @@ static struct platform_device *n35_devices[] __initdata = {
 	&n35_button_device,
 };
 
-static struct s3c2410_platform_i2c n30_i2ccfg = {
+static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
 	.flags		= 0,
 	.slave_addr	= 0x10,
 	.frequency	= 10*1000,
@@ -500,8 +500,8 @@ static void __init n30_init_irq(void)
 static void __init n30_init(void)
 {
 	s3c24xx_fb_set_platdata(&n30_fb_info);
-	s3c_device_i2c0.dev.platform_data = &n30_i2ccfg;
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
+	s3c_i2c0_set_platdata(&n30_i2ccfg);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 2cc9849eb448..ab092bcda393 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -258,7 +258,7 @@ static struct platform_device *qt2410_devices[] __initdata = {
 	&qt2410_led,
 };
 
-static struct mtd_partition qt2410_nand_part[] = {
+static struct mtd_partition __initdata qt2410_nand_part[] = {
 	[0] = {
 		.name	= "U-Boot",
 		.size	= 0x30000,
@@ -286,7 +286,7 @@ static struct mtd_partition qt2410_nand_part[] = {
 	},
 };
 
-static struct s3c2410_nand_set qt2410_nand_sets[] = {
+static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = {
 	[0] = {
 		.name		= "NAND",
 		.nr_chips	= 1,
@@ -299,7 +299,7 @@ static struct s3c2410_nand_set qt2410_nand_sets[] = {
  * chips and beyond.
  */
 
-static struct s3c2410_platform_nand qt2410_nand_info = {
+static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
 	.tacls		= 20,
 	.twrph0		= 60,
 	.twrph1		= 20,
@@ -331,7 +331,7 @@ static void __init qt2410_map_io(void)
 
 static void __init qt2410_machine_init(void)
 {
-	s3c_device_nand.dev.platform_data = &qt2410_nand_info;
+	s3c_nand_set_platdata(&qt2410_nand_info);
 
 	switch (tft_type) {
 	case 'p': /* production */
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 1628cc773a2c..0d61fb577170 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-vr1000.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright (c) 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * Machine support for Thorcom VR1000 board. Designed for Thorcom by
@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/iic.h>
+#include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -393,6 +394,7 @@ static void __init vr1000_init(void)
 				ARRAY_SIZE(vr1000_i2c_devs));
 
 	nor_simtec_init();
+	simtec_audio_add(NULL, true, NULL);
 }
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
index f178c2fd9d85..8338865e11c0 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/pll.c
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@arm.linux.org.uk>
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 50e25fc5f8ab..6b9d0d83a6f9 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/usb-simtec.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
+ * Copyright 2004-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -108,7 +108,7 @@ int usb_simtec_init(void)
 {
 	int ret;
 
-	printk("USB Power Control, (c) 2004 Simtec Electronics\n");
+	printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
 
 	ret = gpio_request(S3C2410_GPB(4), "USB power control");
 	if (ret < 0) {
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index c2bdc4635d12..9a8c0657ae50 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2412/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -90,6 +88,4 @@ config MACH_VSTMS
 	help
 	  Say Y here if you are using an VSTMS board
 
-
 endmenu
-
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 8df506eac903..c9fa3fca486c 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -96,7 +96,7 @@ static struct s3c2410_uartcfg jive_uartcfgs[] = {
  * 0x017d0000-0x02bd0000 : cramfs B
  * 0x02bd0000-0x03fd0000 : yaffs
  */
-static struct mtd_partition jive_imageA_nand_part[] = {
+static struct mtd_partition __initdata jive_imageA_nand_part[] = {
 
 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 	/* Don't allow access to the bootloader from linux */
@@ -154,7 +154,7 @@ static struct mtd_partition jive_imageA_nand_part[] = {
         },
 };
 
-static struct mtd_partition jive_imageB_nand_part[] = {
+static struct mtd_partition __initdata jive_imageB_nand_part[] = {
 
 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 	/* Don't allow access to the bootloader from linux */
@@ -213,7 +213,7 @@ static struct mtd_partition jive_imageB_nand_part[] = {
         },
 };
 
-static struct s3c2410_nand_set jive_nand_sets[] = {
+static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
 	[0] = {
 		.name           = "flash",
 		.nr_chips       = 1,
@@ -222,7 +222,7 @@ static struct s3c2410_nand_set jive_nand_sets[] = {
 	},
 };
 
-static struct s3c2410_platform_nand jive_nand_info = {
+static struct s3c2410_platform_nand __initdata jive_nand_info = {
 	/* set taken from osiris nand timings, possibly still conservative */
 	.tacls		= 30,
 	.twrph0		= 55,
@@ -631,7 +631,8 @@ static void __init jive_machine_init(void)
 
 	s3c_pm_init();
 
-	s3c_device_nand.dev.platform_data = &jive_nand_info;
+	/** TODO - check that this is after the cmdline option! */
+	s3c_nand_set_platdata(&jive_nand_info);
 
 	/* initialise the spi */
 
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 11e8ad49fc7b..a6ba591b26bb 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -76,7 +76,7 @@ static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
 	}
 };
 
-static struct mtd_partition vstms_nand_part[] = {
+static struct mtd_partition __initdata vstms_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= 0x7C000,
@@ -99,7 +99,7 @@ static struct mtd_partition vstms_nand_part[] = {
 	},
 };
 
-static struct s3c2410_nand_set vstms_nand_sets[] = {
+static struct s3c2410_nand_set __initdata vstms_nand_sets[] = {
 	[0] = {
 		.name		= "NAND",
 		.nr_chips	= 1,
@@ -112,7 +112,7 @@ static struct s3c2410_nand_set vstms_nand_sets[] = {
  * chips and beyond.
 */
 
-static struct s3c2410_platform_nand vstms_nand_info = {
+static struct s3c2410_platform_nand __initdata vstms_nand_info = {
 	.tacls		= 20,
 	.twrph0		= 60,
 	.twrph1		= 20,
@@ -143,8 +143,6 @@ static void __init vstms_fixup(struct machine_desc *desc,
 
 static void __init vstms_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &vstms_nand_info;
-
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
@@ -153,6 +151,8 @@ static void __init vstms_map_io(void)
 static void __init vstms_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&vstms_nand_info);
+
 	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
 }
 
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index a8b69d77571b..80879358eb2f 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2440/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -53,6 +51,19 @@ config MACH_OSIRIS
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
 
+config MACH_OSIRIS_DVS
+	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
+	depends on MACH_OSIRIS
+	select TPS65010
+	help
+	  Say Y/M here if you want to have dynamic voltage scaling support
+	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
+
+	  The DVS driver alters the voltage supplied to the ARM core
+	  depending on the frequency it is running at. The driver itself
+	  does not do any of the frequency alteration, which is left up
+	  to the cpufreq driver.
+
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
 	select CPU_S3C2440
@@ -109,4 +120,3 @@ config MACH_MINI2440
 	  available via various sources. It can come with a 3.5" or 7" touch LCD.
 
 endmenu
-
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index bfadcf684a2a..5f3224531885 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -23,3 +23,7 @@ obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
 obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
 obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+
+# extra machine support
+
+obj-$(CONFIG_MACH_OSIRIS_DVS)	+= mach-osiris-dvs.o
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 63c5ab65727f..0c049b95c378 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 68f3870991bf..62a4c3eba97f 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-anubis.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -53,8 +53,9 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/audio-simtec.h>
 
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
 
 static struct map_desc anubis_iodesc[] __initdata = {
   /* ISA IO areas */
@@ -138,7 +139,7 @@ static int external_map[]   = { 2 };
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-static struct mtd_partition anubis_default_nand_part[] = {
+static struct mtd_partition __initdata anubis_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -161,7 +162,7 @@ static struct mtd_partition anubis_default_nand_part[] = {
 	}
 };
 
-static struct mtd_partition anubis_default_nand_part_large[] = {
+static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_128K,
@@ -191,7 +192,7 @@ static struct mtd_partition anubis_default_nand_part_large[] = {
  * socket.
 */
 
-static struct s3c2410_nand_set anubis_nand_sets[] = {
+static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
 	[1] = {
 		.name		= "External",
 		.nr_chips	= 1,
@@ -233,7 +234,7 @@ static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
 	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
 }
 
-static struct s3c2410_platform_nand anubis_nand_info = {
+static struct s3c2410_platform_nand __initdata anubis_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 55,
 	.twrph1		= 40,
@@ -437,6 +438,17 @@ static struct i2c_board_info anubis_i2c_devs[] __initdata = {
 	}
 };
 
+/* Audio setup */
+static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
+	.have_mic	= 1,
+	.have_lout	= 1,
+	.output_cdclk	= 1,
+	.use_mpllin	= 1,
+	.amp_gpio	= S3C2410_GPB(2),
+	.amp_gain[0]	= S3C2410_GPD(10),
+	.amp_gain[1]	= S3C2410_GPD(11),
+};
+
 static void __init anubis_map_io(void)
 {
 	/* initialise the clocks */
@@ -454,8 +466,6 @@ static void __init anubis_map_io(void)
 
 	s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
 
-	s3c_device_nand.dev.platform_data = &anubis_nand_info;
-
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
@@ -476,6 +486,9 @@ static void __init anubis_map_io(void)
 static void __init anubis_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&anubis_nand_info);
+	simtec_audio_add(NULL, false, &anubis_audio);
+
 	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
 
 	i2c_register_board_info(0, anubis_i2c_devs,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index dfc7010935da..aa69290e04c6 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -96,7 +96,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
 
 /* NAND Flash on AT2440EVB board */
 
-static struct mtd_partition at2440evb_default_nand_part[] = {
+static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_256K,
@@ -114,7 +114,7 @@ static struct mtd_partition at2440evb_default_nand_part[] = {
 	},
 };
 
-static struct s3c2410_nand_set at2440evb_nand_sets[] = {
+static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
 	[0] = {
 		.name		= "nand",
 		.nr_chips	= 1,
@@ -123,7 +123,7 @@ static struct s3c2410_nand_set at2440evb_nand_sets[] = {
 	},
 };
 
-static struct s3c2410_platform_nand at2440evb_nand_info = {
+static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 55,
 	.twrph1		= 40,
@@ -216,8 +216,6 @@ static struct platform_device *at2440evb_devices[] __initdata = {
 
 static void __init at2440evb_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
-	s3c_device_sdi.name = "s3c2440-sdi";
 	s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
 
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
@@ -228,6 +226,7 @@ static void __init at2440evb_map_io(void)
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+	s3c_nand_set_platdata(&at2440evb_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
 	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 1c3382fefdd2..547d4fc99131 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -532,7 +532,6 @@ static void __init mini2440_map_io(void)
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
 
-	s3c_device_nand.dev.platform_data = &mini2440_nand_info;
 	s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
 }
 
@@ -677,8 +676,11 @@ static void __init mini2440_init(void)
 		printk("\n");
 		s3c24xx_fb_set_platdata(&mini2440_fb_info);
 	}
+
 	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+	s3c_nand_set_platdata(&mini2440_nand_info);
 	s3c_i2c0_set_platdata(NULL);
+
 	i2c_register_board_info(0, mini2440_i2c_devs,
 				ARRAY_SIZE(mini2440_i2c_devs));
 
diff --git a/arch/arm/mach-s3c2440/mach-osiris-dvs.c b/arch/arm/mach-s3c2440/mach-osiris-dvs.c
new file mode 100644
index 000000000000..ad2792dfbee1
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-osiris-dvs.c
@@ -0,0 +1,194 @@
+/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec Osiris Dynamic Voltage Scaling support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/tps65010.h>
+
+#include <plat/cpu-freq.h>
+
+#define OSIRIS_GPIO_DVS	S3C2410_GPB(5)
+
+static bool dvs_en;
+
+static void osiris_dvs_tps_setdvs(bool on)
+{
+	unsigned vregs1 = 0, vdcdc2 = 0;
+
+	if (!on) {
+		vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
+		vregs1 = TPS_LDO1_OFF;	/* turn off in low-power mode */
+	}
+
+	dvs_en = on;
+	vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
+	vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
+
+	tps65010_config_vregs1(vregs1);
+	tps65010_config_vdcdc2(vdcdc2);
+}
+
+static bool is_dvs(struct s3c_freq *f)
+{
+	/* at the moment, we assume ARMCLK = HCLK => DVS */
+	return f->armclk == f->hclk;
+}
+
+/* keep track of current state */
+static bool cur_dvs = false;
+
+static int osiris_dvs_notify(struct notifier_block *nb,
+			      unsigned long val, void *data)
+{
+	struct cpufreq_freqs *cf = data;
+	struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
+	bool old_dvs = is_dvs(&freqs->old);
+	bool new_dvs = is_dvs(&freqs->new);
+	int ret = 0;
+
+	if (!dvs_en)
+		return 0;
+
+	printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
+	       freqs->old.armclk, freqs->old.hclk,
+	       freqs->new.armclk, freqs->new.hclk);
+
+	switch (val) {
+	case CPUFREQ_PRECHANGE:
+		if (old_dvs & !new_dvs ||
+		    cur_dvs & !new_dvs) {
+			pr_debug("%s: exiting dvs\n", __func__);
+			cur_dvs = false;
+			gpio_set_value(OSIRIS_GPIO_DVS, 1);
+		}
+		break;
+	case CPUFREQ_POSTCHANGE:
+		if (!old_dvs & new_dvs ||
+		    !cur_dvs & new_dvs) {
+			pr_debug("entering dvs\n");
+			cur_dvs = true;
+			gpio_set_value(OSIRIS_GPIO_DVS, 0);
+		}
+		break;
+	}
+
+	return ret;
+}
+
+static struct notifier_block osiris_dvs_nb = {
+	.notifier_call	= osiris_dvs_notify,
+};
+
+static int __devinit osiris_dvs_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	dev_info(&pdev->dev, "initialising\n");
+
+	ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
+	if (ret) {
+		dev_err(&pdev->dev, "cannot claim gpio\n");
+		goto err_nogpio;
+	}
+
+	/* start with dvs disabled */
+	gpio_direction_output(OSIRIS_GPIO_DVS, 1);
+
+	ret = cpufreq_register_notifier(&osiris_dvs_nb,
+					CPUFREQ_TRANSITION_NOTIFIER);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register with cpufreq\n");
+		goto err_nofreq;
+	}
+
+	osiris_dvs_tps_setdvs(true);
+
+	return 0;
+
+err_nofreq:
+	gpio_free(OSIRIS_GPIO_DVS);
+
+err_nogpio:
+	return ret;
+}
+
+static int __devexit osiris_dvs_remove(struct platform_device *pdev)
+{
+	dev_info(&pdev->dev, "exiting\n");
+
+	/* disable any current dvs */
+	gpio_set_value(OSIRIS_GPIO_DVS, 1);
+	osiris_dvs_tps_setdvs(false);
+
+	cpufreq_unregister_notifier(&osiris_dvs_nb,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+
+	gpio_free(OSIRIS_GPIO_DVS);
+
+	return 0;
+}
+
+/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
+ * out if the configuration isn't set. */
+
+static int osiris_dvs_suspend(struct device *dev)
+{
+	gpio_set_value(OSIRIS_GPIO_DVS, 1);
+	osiris_dvs_tps_setdvs(false);
+	cur_dvs = false;
+
+	return 0;
+}
+
+static int osiris_dvs_resume(struct device *dev)
+{
+	osiris_dvs_tps_setdvs(true);
+	return 0;
+}
+
+static const struct dev_pm_ops osiris_dvs_pm = {
+	.suspend	= osiris_dvs_suspend,
+	.resume		= osiris_dvs_resume,
+};
+
+static struct platform_driver osiris_dvs_driver = {
+	.probe		= osiris_dvs_probe,
+	.remove		= __devexit_p(osiris_dvs_remove),
+	.driver		= {
+		.name	= "osiris-dvs",
+		.owner	= THIS_MODULE,
+		.pm	= &osiris_dvs_pm,
+	},
+};
+
+static int __init osiris_dvs_init(void)
+{
+	return platform_driver_register(&osiris_dvs_driver);
+}
+
+static void __exit osiris_dvs_exit(void)
+{
+	platform_driver_unregister(&osiris_dvs_driver);
+}
+
+module_init(osiris_dvs_init);
+module_exit(osiris_dvs_exit);
+
+MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:osiris-dvs");
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 2105a41281a4..015dfb2a80da 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-osiris.c
  *
- * Copyright (c) 2005,2008 Simtec Electronics
+ * Copyright (c) 2005-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -23,6 +23,8 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 
+#include <linux/i2c/tps65010.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -148,7 +150,7 @@ static int external_map[]   = { 2 };
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-static struct mtd_partition osiris_default_nand_part[] = {
+static struct mtd_partition __initdata osiris_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -171,7 +173,7 @@ static struct mtd_partition osiris_default_nand_part[] = {
 	}
 };
 
-static struct mtd_partition osiris_default_nand_part_large[] = {
+static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_128K,
@@ -201,7 +203,7 @@ static struct mtd_partition osiris_default_nand_part_large[] = {
  * socket.
 */
 
-static struct s3c2410_nand_set osiris_nand_sets[] = {
+static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
 	[1] = {
 		.name		= "External",
 		.nr_chips	= 1,
@@ -243,7 +245,7 @@ static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
 }
 
-static struct s3c2410_platform_nand osiris_nand_info = {
+static struct s3c2410_platform_nand __initdata osiris_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 60,
 	.twrph1		= 60,
@@ -326,12 +328,44 @@ static struct sys_device osiris_pm_sysdev = {
 	.cls		= &osiris_pm_sysclass,
 };
 
+/* Link for DVS driver to TPS65011 */
+
+static void osiris_tps_release(struct device *dev)
+{
+	/* static device, do not need to release anything */
+}
+
+static struct platform_device osiris_tps_device = {
+	.name	= "osiris-dvs",
+	.id	= -1,
+	.dev.release = osiris_tps_release,
+};
+
+static int osiris_tps_setup(struct i2c_client *client, void *context)
+{
+	osiris_tps_device.dev.parent = &client->dev;
+	return platform_device_register(&osiris_tps_device);
+}
+
+static int osiris_tps_remove(struct i2c_client *client, void *context)
+{
+	platform_device_unregister(&osiris_tps_device);
+	return 0;
+}
+
+static struct tps65010_board osiris_tps_board = {
+	.base		= -1,	/* GPIO can go anywhere at the moment */
+	.setup		= osiris_tps_setup,
+	.teardown	= osiris_tps_remove,
+};
+
 /* I2C devices fitted. */
 
 static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 	{
 		I2C_BOARD_INFO("tps65011", 0x48),
 		.irq	= IRQ_EINT20,
+		.platform_data = &osiris_tps_board,
 	},
 };
 
@@ -377,8 +411,6 @@ static void __init osiris_map_io(void)
 
 	s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
 
-	s3c_device_nand.dev.platform_data = &osiris_nand_info;
-
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
@@ -408,6 +440,7 @@ static void __init osiris_init(void)
 	sysdev_register(&osiris_pm_sysdev);
 
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&osiris_nand_info);
 
 	s3c_cpufreq_setboard(&osiris_cpufreq);
 
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index bc8d8d1ebd1a..a952a13afb1f 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-rx3715.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.handhelds.org/projects/rx3715.html
@@ -149,7 +149,7 @@ static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
 	.gpdup_mask =	0xffffffff,
 };
 
-static struct mtd_partition rx3715_nand_part[] = {
+static struct mtd_partition __initdata rx3715_nand_part[] = {
 	[0] = {
 		.name		= "Whole Flash",
 		.offset		= 0,
@@ -158,7 +158,7 @@ static struct mtd_partition rx3715_nand_part[] = {
 	}
 };
 
-static struct s3c2410_nand_set rx3715_nand_sets[] = {
+static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
 	[0] = {
 		.name		= "Internal",
 		.nr_chips	= 1,
@@ -167,7 +167,7 @@ static struct s3c2410_nand_set rx3715_nand_sets[] = {
 	},
 };
 
-static struct s3c2410_platform_nand rx3715_nand_info = {
+static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 50,
 	.twrph1		= 15,
@@ -186,8 +186,6 @@ static struct platform_device *rx3715_devices[] __initdata = {
 
 static void __init rx3715_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &rx3715_nand_info;
-
 	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
 	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
@@ -205,6 +203,7 @@ static void __init rx3715_init_machine(void)
 #endif
 	s3c_pm_init();
 
+	s3c_nand_set_platdata(&rx3715_nand_info);
 	s3c24xx_fb_set_platdata(&rx3715_fb_info);
 	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
 }
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index db6eafbd4d90..ec13e748ccc5 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
+ * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.fluff.org/ben/smdk2440/
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 103e913f2258..8d3811852fc7 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2442/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -36,6 +34,4 @@ config MACH_NEO1973_GTA02
 	help
 	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
 
-
 endmenu
-
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index 0fb385bd9cd9..f76d6ff4aeb9 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -423,7 +423,7 @@ static struct i2c_board_info gta02_i2c_devs[] __initdata = {
 	},
 };
 
-static struct s3c2410_nand_set gta02_nand_sets[] = {
+static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
 	[0] = {
 		/*
 		 * This name is also hard-coded in the boot loaders, so
@@ -442,7 +442,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = {
  * data sheet (K5D2G13ACM-D075 MCP Memory).
  */
 
-static struct s3c2410_platform_nand gta02_nand_info = {
+static struct s3c2410_platform_nand __initdata gta02_nand_info = {
 	.tacls		= 0,
 	.twrph0		= 25,
 	.twrph1		= 15,
@@ -621,9 +621,9 @@ static void __init gta02_machine_init(void)
 #endif
 
 	s3c_device_usb.dev.platform_data = &gta02_usb_info;
-	s3c_device_nand.dev.platform_data = &gta02_nand_info;
 
 	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+	s3c_nand_set_platdata(&gta02_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
 	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 212141baebec..4314c4424909 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2443/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index 79e4d93ea2b6..d88c8b24fe34 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c24a0/include/mach/map.h
  *
- * Copyright 2003,2007  Simtec Electronics
+ * Copyright 2003-2007  Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
index af2abd756c30..be0af518b488 100644
--- a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index 770b72067e3d..a250bf68709f 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c6400/Kconfig
-#
 # Copyright 2008 Openmoko, Inc.
 #	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
 #
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index fc8b223bad4f..106ee13581e2 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -48,6 +48,8 @@
 #define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_PCM0		(0x7F009000)
+#define S3C64XX_PA_PCM1		(0x7F00A000)
 #define S3C64XX_PA_IISV4	(0x7F00D000)
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
@@ -64,6 +66,9 @@
 
 #define S3C64XX_PA_USBHOST	(0x74300000)
 
+#define S3C64XX_PA_USB_HSPHY	(0x7C100000)
+#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
+
 /* place VICs close together */
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
@@ -79,5 +84,6 @@
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
+#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
index 47019795ce06..f56611526c63 100644
--- a/arch/arm/mach-s3c6400/include/mach/regs-fb.h
+++ b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
@@ -1,195 +1,30 @@
-/* arch/arm/mach-s3c6400/include/mach/regs-fb.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - new-style framebuffer register definitions
+ * Copyright 2009 Samsung Electronics Co.
  *
- * This is the register set for the new style framebuffer interface
- * found from the S3C2443 onwards and specifically the S3C64XX series
- * S3C6400 and S3C6410.
+ * Pawel Osciak <p.osciak@samsung.com>
+ * Based on plat-s3c/include/plat/regs-fb.h by Ben Dooks <ben@simtec.co.uk>
  *
- * The file contains the cpu specific items which change between whichever
- * architecture is selected. See <plat/regs-fb.h> for the core definitions
- * that are the same.
+ * Framebuffer register definitions for Samsung S3C64xx.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-/* include the core definitions here, in case we really do need to
- * override them at a later date.
-*/
-
-#include <plat/regs-fb.h>
-
-#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
-#define VIDCON1_FSTATUS_EVEN	(1 << 15)
-
-/* Video timing controls */
-#define VIDTCON0				(0x10)
-#define VIDTCON1				(0x14)
-#define VIDTCON2				(0x18)
-
-/* Window position controls */
-
-#define WINCON(_win)				(0x20 + ((_win) * 4))
-
-/* OSD1 and OSD4 do not have register D */
-
-#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
-#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
-#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
-#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
-
-/* Video buffer addresses */
-
-#define VIDW_BUF_START(_buff)			(0xA0 + ((_buff) * 8))
-#define VIDW_BUF_START1(_buff)			(0xA4 + ((_buff) * 8))
-#define VIDW_BUF_END(_buff)			(0xD0 + ((_buff) * 8))
-#define VIDW_BUF_END1(_buff)			(0xD4 + ((_buff) * 8))
-#define VIDW_BUF_SIZE(_buff)			(0x100 + ((_buff) * 4))
-
-#define VIDINTCON0				(0x130)
-
-#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
-
-/* WINCONx */
-
-#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
-#define WINCONx_CSCWIDTH_SHIFT			(26)
-#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
-#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
-
-#define WINCONx_ENLOCAL				(1 << 22)
-#define WINCONx_BUFSTATUS			(1 << 21)
-#define WINCONx_BUFSEL				(1 << 20)
-#define WINCONx_BUFAUTOEN			(1 << 19)
-#define WINCONx_YCbCr				(1 << 13)
-
-#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
-
-#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
-#define WINCON2_BLD_PIX				(1 << 6)
-
-#define WINCON2_ALPHA_SEL			(1 << 1)
-#define WINCON2_BPPMODE_MASK			(0xf << 2)
-#define WINCON2_BPPMODE_SHIFT			(2)
-#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
-#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define WINCON3_BLD_PIX				(1 << 6)
-
-#define WINCON3_ALPHA_SEL			(1 << 1)
-#define WINCON3_BPPMODE_MASK			(0xf << 2)
-#define WINCON3_BPPMODE_SHIFT			(2)
-#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
-
-#define DITHMODE				(0x170)
-#define WINxMAP(_win)				(0x180 + ((_win) * 4))
-
-
-#define DITHMODE_R_POS_MASK			(0x3 << 5)
-#define DITHMODE_R_POS_SHIFT			(5)
-#define DITHMODE_R_POS_8BIT			(0x0 << 5)
-#define DITHMODE_R_POS_6BIT			(0x1 << 5)
-#define DITHMODE_R_POS_5BIT			(0x2 << 5)
-
-#define DITHMODE_G_POS_MASK			(0x3 << 3)
-#define DITHMODE_G_POS_SHIFT			(3)
-#define DITHMODE_G_POS_8BIT			(0x0 << 3)
-#define DITHMODE_G_POS_6BIT			(0x1 << 3)
-#define DITHMODE_G_POS_5BIT			(0x2 << 3)
-
-#define DITHMODE_B_POS_MASK			(0x3 << 1)
-#define DITHMODE_B_POS_SHIFT			(1)
-#define DITHMODE_B_POS_8BIT			(0x0 << 1)
-#define DITHMODE_B_POS_6BIT			(0x1 << 1)
-#define DITHMODE_B_POS_5BIT			(0x2 << 1)
+#ifndef __ASM_ARCH_MACH_REGS_FB_H
+#define __ASM_ARCH_MACH_REGS_FB_H __FILE__
 
-#define DITHMODE_DITH_EN			(1 << 0)
-
-#define WPALCON					(0x1A0)
-
-#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
-#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
-#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
+#include <plat/regs-fb-v4.h>
 
 /* Palette registers */
-
 #define WIN2_PAL(_entry)			(0x300 + ((_entry) * 2))
 #define WIN3_PAL(_entry)			(0x320 + ((_entry) * 2))
 #define WIN4_PAL(_entry)			(0x340 + ((_entry) * 2))
 #define WIN0_PAL(_entry)			(0x400 + ((_entry) * 4))
 #define WIN1_PAL(_entry)			(0x800 + ((_entry) * 4))
 
-/* system specific implementation code for palette sizes, and other
- * information that changes depending on which architecture is being
- * compiled.
-*/
-
-/* return true if window _win has OSD register D */
-#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
-
-static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
-{
-	if (win < 2)
-		return 256;
-	if (win < 4)
-		return 16;
-	if (win == 4)
-		return 4;
-
-	BUG();	/* shouldn't get here */
-}
-
-static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
-{
-	/* all windows can do 1/2 bpp */
-
-	if ((bpp == 25 || bpp == 19) && win == 0)
-		return 0;	/* win 0 does not have 19 or 25bpp modes */
-
-	if (bpp == 4 && win == 4)
-		return 0;
-
-	if (bpp == 8 && (win >= 3))
-		return 0;	/* win 3/4 cannot do 8bpp in any mode */
-
-	return 1;
-}
-
 static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
 {
 	switch (window) {
@@ -203,57 +38,4 @@ static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
 	BUG();
 }
 
-static inline int s3c_fb_pal_is16(unsigned int window)
-{
-	return window > 1;
-}
-
-struct s3c_fb_palette {
-	struct fb_bitfield	r;
-	struct fb_bitfield	g;
-	struct fb_bitfield	b;
-	struct fb_bitfield	a;
-};
-
-static inline void s3c_fb_init_palette(unsigned int window,
-				       struct s3c_fb_palette *palette)
-{
-	if (window < 2) {
-		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
-		palette->r.offset = 16;
-		palette->r.length = 8;
-		palette->g.offset = 8;
-		palette->g.length = 8;
-		palette->b.offset = 0;
-		palette->b.length = 8;
-	} else {
-		/* currently we assume RGB 5/6/5 */
-		palette->r.offset = 11;
-		palette->r.length = 5;
-		palette->g.offset = 5;
-		palette->g.length = 6;
-		palette->b.offset = 0;
-		palette->b.length = 5;
-	}
-}
-
-/* Notes on per-window bpp settings
- *
- * Value	Win0	 Win1	  Win2	   Win3	    Win 4
- * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
- * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
- * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
- * 0011		8(P)	 8(P)     -none-   -none-   -none-
- * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
- * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
- * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
- * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
- * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
- * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
- * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
- * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
- * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
- * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
- * 1110		-none-	 -none-	  -none-   -none-    -none-
- * 1111		-none-	 -none-   -none-   -none-    -none-
-*/
+#endif /* __ASM_ARCH_MACH_REGS_FB_H */
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index b42bdd0f2138..d876ee503671 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -45,6 +45,7 @@ void __init s3c6400_map_io(void)
 
 	s3c6400_default_sdhci0();
 	s3c6400_default_sdhci1();
+	s3c6400_default_sdhci2();
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c
index b93dafbee1f4..1039937403be 100644
--- a/arch/arm/mach-s3c6400/setup-sdhci.c
+++ b/arch/arm/mach-s3c6400/setup-sdhci.c
@@ -30,7 +30,7 @@ char *s3c6400_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",
 	[1] = "hsmmc",
 	[2] = "mmc_bus",
-	/* [3] = "48m", - note not succesfully used yet */
+	/* [3] = "48m", - note not successfully used yet */
 };
 
 void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 72d4b11b2077..162f4561f80f 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c6410/Kconfig
-#
 # Copyright 2008 Openmoko, Inc.
 # Copyright 2008 Simtec Electronics
 #
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index 9b67c663d9d8..522c08691952 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -58,6 +58,7 @@ void __init s3c6410_map_io(void)
 	/* initialise device information early */
 	s3c6410_default_sdhci0();
 	s3c6410_default_sdhci1();
+	s3c6410_default_sdhci2();
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
index c5741056193f..cdd4b5378552 100644
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -250,7 +250,7 @@ static void __init hmt_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
 	s3c_fb_set_platdata(&hmt_lcd_pdata);
-	s3c_device_nand.dev.platform_data = &hmt_nand_info;
+	s3c_nand_set_platdata(&hmt_nand_info);
 
 	gpio_request(S3C64XX_GPC(7), "usb power");
 	gpio_direction_output(S3C64XX_GPC(7), 0);
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 9f1a21462620..480d297c1de2 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
 
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 #include <linux/mfd/wm8350/core.h>
@@ -184,6 +185,43 @@ static struct platform_device smdk6410_smsc911x = {
 	},
 };
 
+#ifdef CONFIG_REGULATOR
+static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "PVDD",
+		.dev_name = "0-001b",
+	},
+	{
+		/* WM8580 */
+		.supply = "AVDD",
+		.dev_name = "0-001b",
+	},
+};
+
+static struct regulator_init_data smdk6410_b_pwr_5v_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
+	.consumer_supplies = smdk6410_b_pwr_5v_consumers,
+};
+
+static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
+	.supply_name = "B_PWR_5V",
+	.microvolts = 5000000,
+	.init_data = &smdk6410_b_pwr_5v_data,
+};
+
+static struct platform_device smdk6410_b_pwr_5v = {
+	.name          = "reg-fixed-voltage",
+	.id            = -1,
+	.dev = {
+		.platform_data = &smdk6410_b_pwr_5v_pdata,
+	},
+};
+#endif
+
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
@@ -198,6 +236,10 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_usb,
 	&s3c_device_usb_hsotg,
+
+#ifdef CONFIG_REGULATOR
+	&smdk6410_b_pwr_5v,
+#endif
 	&smdk6410_lcd_powerdev,
 
 	&smdk6410_smsc911x,
@@ -232,6 +274,14 @@ static struct regulator_init_data wm8350_dcdc3_data = {
 };
 
 /* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "DVDD",
+		.dev_name = "0-001b",
+	},
+};
+
 static struct regulator_init_data wm8350_dcdc4_data = {
 	.constraints = {
 		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
@@ -239,6 +289,8 @@ static struct regulator_init_data wm8350_dcdc4_data = {
 		.max_uV = 3000000,
 		.always_on = 1,
 	},
+	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
+	.consumer_supplies = wm8350_dcdc4_consumers,
 };
 
 /* ARM core */
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
index 20666f3bd478..816d2d9f9ef8 100644
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -30,7 +30,7 @@ char *s3c6410_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",
 	[1] = "hsmmc",
 	[2] = "mmc_bus",
-	/* [3] = "48m", - note not succesfully used yet */
+	/* [3] = "48m", - note not successfully used yet */
 };
 
 
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index b1a4ba504416..27ec167d2808 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s5pc100/Kconfig
-#
 # Copyright 2009 Samsung Electronics Co.
 #	Byungho Min <bhmin@samsung.com>
 #
@@ -14,9 +12,23 @@ config CPU_S5PC100
 	help
 	  Enable S5PC100 CPU support
 
+config S5PC100_SETUP_SDHCI
+        bool
+        select S5PC1XX_SETUP_SDHCI_GPIO
+        help
+          Internal helper functions for S5PC100 based SDHCI systems
+
 config MACH_SMDKC100
 	bool "SMDKC100"
 	select CPU_S5PC100
+	select S3C_DEV_FB
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S5PC1XX_SETUP_I2C0
 	select S5PC1XX_SETUP_I2C1
+	select S5PC1XX_SETUP_FB_24BPP
+	select S5PC100_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index afc89b381d7a..809ff10f768f 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -13,5 +13,9 @@ obj-				:=
 
 obj-$(CONFIG_CPU_S5PC100)	+= cpu.o
 
+# Helper and device support
+
+obj-$(CONFIG_S5PC100_SETUP_SDHCI)       += setup-sdhci.o
+
 # machine support
 obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index 0e718890da32..d79e7574a852 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -22,6 +22,8 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
+#include <asm/proc-fns.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -32,6 +34,7 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
+#include <plat/regs-power.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -45,6 +48,23 @@
 static struct map_desc s5pc100_iodesc[] __initdata = {
 };
 
+static void s5pc100_idle(void)
+{
+	unsigned long tmp;
+
+	tmp = __raw_readl(S5PC100_PWR_CFG);
+	tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE;
+	tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK;
+	tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE;
+	__raw_writel(tmp, S5PC100_PWR_CFG);
+
+	tmp = __raw_readl(S5PC100_OTHERS);
+	tmp |= S5PC100_PMU_INT_DISABLE;
+	__raw_writel(tmp, S5PC100_OTHERS);
+
+	cpu_do_idle();
+}
+
 /* s5pc100_map_io
  *
  * register the standard cpu IO areas
@@ -55,6 +75,13 @@ void __init s5pc100_map_io(void)
 	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
 
 	/* initialise device information early */
+	s5pc100_default_sdhci0();
+	s5pc100_default_sdhci1();
+	s5pc100_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
 }
 
 void __init s5pc100_init_clocks(int xtal)
@@ -93,5 +120,7 @@ int __init s5pc100_init(void)
 {
 	printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
 
+	s5pc1xx_idle = s5pc100_idle;
+
 	return sysdev_register(&s5pc100_sysdev);
 }
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index c74fc93d7d15..2c4cbe8ee6b7 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -18,40 +18,45 @@
 #define gpio_to_irq	__gpio_to_irq
 
 /* GPIO bank sizes */
-#define S5PC1XX_GPIO_A0_NR	(8)
-#define S5PC1XX_GPIO_A1_NR	(5)
-#define S5PC1XX_GPIO_B_NR	(8)
-#define S5PC1XX_GPIO_C_NR	(5)
-#define S5PC1XX_GPIO_D_NR	(7)
-#define S5PC1XX_GPIO_E0_NR	(8)
-#define S5PC1XX_GPIO_E1_NR	(6)
-#define S5PC1XX_GPIO_F0_NR	(8)
-#define S5PC1XX_GPIO_F1_NR	(8)
-#define S5PC1XX_GPIO_F2_NR	(8)
-#define S5PC1XX_GPIO_F3_NR	(4)
-#define S5PC1XX_GPIO_G0_NR	(8)
-#define S5PC1XX_GPIO_G1_NR	(3)
-#define S5PC1XX_GPIO_G2_NR	(7)
-#define S5PC1XX_GPIO_G3_NR	(7)
-#define S5PC1XX_GPIO_H0_NR	(8)
-#define S5PC1XX_GPIO_H1_NR	(8)
-#define S5PC1XX_GPIO_H2_NR	(8)
-#define S5PC1XX_GPIO_H3_NR	(8)
-#define S5PC1XX_GPIO_I_NR	(8)
-#define S5PC1XX_GPIO_J0_NR	(8)
-#define S5PC1XX_GPIO_J1_NR	(5)
-#define S5PC1XX_GPIO_J2_NR	(8)
-#define S5PC1XX_GPIO_J3_NR	(8)
-#define S5PC1XX_GPIO_J4_NR	(4)
-#define S5PC1XX_GPIO_K0_NR	(8)
-#define S5PC1XX_GPIO_K1_NR	(6)
-#define S5PC1XX_GPIO_K2_NR	(8)
-#define S5PC1XX_GPIO_K3_NR	(8)
-#define S5PC1XX_GPIO_MP00_NR	(8)
-#define S5PC1XX_GPIO_MP01_NR	(8)
-#define S5PC1XX_GPIO_MP02_NR	(8)
-#define S5PC1XX_GPIO_MP03_NR	(8)
-#define S5PC1XX_GPIO_MP04_NR	(5)
+#define S5PC100_GPIO_A0_NR	(8)
+#define S5PC100_GPIO_A1_NR	(5)
+#define S5PC100_GPIO_B_NR	(8)
+#define S5PC100_GPIO_C_NR	(5)
+#define S5PC100_GPIO_D_NR	(7)
+#define S5PC100_GPIO_E0_NR	(8)
+#define S5PC100_GPIO_E1_NR	(6)
+#define S5PC100_GPIO_F0_NR	(8)
+#define S5PC100_GPIO_F1_NR	(8)
+#define S5PC100_GPIO_F2_NR	(8)
+#define S5PC100_GPIO_F3_NR	(4)
+#define S5PC100_GPIO_G0_NR	(8)
+#define S5PC100_GPIO_G1_NR	(3)
+#define S5PC100_GPIO_G2_NR	(7)
+#define S5PC100_GPIO_G3_NR	(7)
+#define S5PC100_GPIO_H0_NR	(8)
+#define S5PC100_GPIO_H1_NR	(8)
+#define S5PC100_GPIO_H2_NR	(8)
+#define S5PC100_GPIO_H3_NR	(8)
+#define S5PC100_GPIO_I_NR	(8)
+#define S5PC100_GPIO_J0_NR	(8)
+#define S5PC100_GPIO_J1_NR	(5)
+#define S5PC100_GPIO_J2_NR	(8)
+#define S5PC100_GPIO_J3_NR	(8)
+#define S5PC100_GPIO_J4_NR	(4)
+#define S5PC100_GPIO_K0_NR	(8)
+#define S5PC100_GPIO_K1_NR	(6)
+#define S5PC100_GPIO_K2_NR	(8)
+#define S5PC100_GPIO_K3_NR	(8)
+#define S5PC100_GPIO_L0_NR	(8)
+#define S5PC100_GPIO_L1_NR	(8)
+#define S5PC100_GPIO_L2_NR	(8)
+#define S5PC100_GPIO_L3_NR	(8)
+#define S5PC100_GPIO_L4_NR	(8)
+#define S5PC100_GPIO_MP00_NR	(8)
+#define S5PC100_GPIO_MP01_NR	(8)
+#define S5PC100_GPIO_MP02_NR	(8)
+#define S5PC100_GPIO_MP03_NR	(8)
+#define S5PC100_GPIO_MP04_NR	(5)
 
 /* GPIO bank numbes */
 
@@ -64,83 +69,94 @@
 	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
 
 enum s3c_gpio_number {
-	S5PC1XX_GPIO_A0_START 	= 0,
-	S5PC1XX_GPIO_A1_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
-	S5PC1XX_GPIO_B_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
-	S5PC1XX_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
-	S5PC1XX_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
-	S5PC1XX_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
-	S5PC1XX_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
-	S5PC1XX_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
-	S5PC1XX_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
-	S5PC1XX_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
-	S5PC1XX_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
-	S5PC1XX_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
-	S5PC1XX_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
-	S5PC1XX_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
-	S5PC1XX_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
-	S5PC1XX_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
-	S5PC1XX_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
-	S5PC1XX_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
-	S5PC1XX_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
-	S5PC1XX_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
-	S5PC1XX_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
-	S5PC1XX_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
-	S5PC1XX_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
-	S5PC1XX_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
-	S5PC1XX_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
-	S5PC1XX_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
-	S5PC1XX_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
-	S5PC1XX_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
-	S5PC1XX_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
-	S5PC1XX_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
-	S5PC1XX_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
-	S5PC1XX_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
-	S5PC1XX_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
-	S5PC1XX_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+	S5PC100_GPIO_A0_START	= 0,
+	S5PC100_GPIO_A1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A0),
+	S5PC100_GPIO_B_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A1),
+	S5PC100_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_B),
+	S5PC100_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_C),
+	S5PC100_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_D),
+	S5PC100_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E0),
+	S5PC100_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E1),
+	S5PC100_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F0),
+	S5PC100_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F1),
+	S5PC100_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F2),
+	S5PC100_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F3),
+	S5PC100_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G0),
+	S5PC100_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G1),
+	S5PC100_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G2),
+	S5PC100_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G3),
+	S5PC100_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H0),
+	S5PC100_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H1),
+	S5PC100_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H2),
+	S5PC100_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H3),
+	S5PC100_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_I),
+	S5PC100_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J0),
+	S5PC100_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J1),
+	S5PC100_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J2),
+	S5PC100_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J3),
+	S5PC100_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J4),
+	S5PC100_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K0),
+	S5PC100_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K1),
+	S5PC100_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K2),
+	S5PC100_GPIO_L0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K3),
+	S5PC100_GPIO_L1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L0),
+	S5PC100_GPIO_L2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L1),
+	S5PC100_GPIO_L3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L2),
+	S5PC100_GPIO_L4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L3),
+	S5PC100_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L4),
+	S5PC100_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP00),
+	S5PC100_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP01),
+	S5PC100_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP02),
+	S5PC100_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP03),
+	S5PC100_GPIO_END	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP04),
 };
 
-/* S5PC1XX GPIO number definitions. */
-#define S5PC1XX_GPA0(_nr)	(S5PC1XX_GPIO_A0_START + (_nr))
-#define S5PC1XX_GPA1(_nr)	(S5PC1XX_GPIO_A1_START + (_nr))
-#define S5PC1XX_GPB(_nr)	(S5PC1XX_GPIO_B_START + (_nr))
-#define S5PC1XX_GPC(_nr)	(S5PC1XX_GPIO_C_START + (_nr))
-#define S5PC1XX_GPD(_nr)	(S5PC1XX_GPIO_D_START + (_nr))
-#define S5PC1XX_GPE0(_nr)	(S5PC1XX_GPIO_E0_START + (_nr))
-#define S5PC1XX_GPE1(_nr)	(S5PC1XX_GPIO_E1_START + (_nr))
-#define S5PC1XX_GPF0(_nr)	(S5PC1XX_GPIO_F0_START + (_nr))
-#define S5PC1XX_GPF1(_nr)	(S5PC1XX_GPIO_F1_START + (_nr))
-#define S5PC1XX_GPF2(_nr)	(S5PC1XX_GPIO_F2_START + (_nr))
-#define S5PC1XX_GPF3(_nr)	(S5PC1XX_GPIO_F3_START + (_nr))
-#define S5PC1XX_GPG0(_nr)	(S5PC1XX_GPIO_G0_START + (_nr))
-#define S5PC1XX_GPG1(_nr)	(S5PC1XX_GPIO_G1_START + (_nr))
-#define S5PC1XX_GPG2(_nr)	(S5PC1XX_GPIO_G2_START + (_nr))
-#define S5PC1XX_GPG3(_nr)	(S5PC1XX_GPIO_G3_START + (_nr))
-#define S5PC1XX_GPH0(_nr)	(S5PC1XX_GPIO_H0_START + (_nr))
-#define S5PC1XX_GPH1(_nr)	(S5PC1XX_GPIO_H1_START + (_nr))
-#define S5PC1XX_GPH2(_nr)	(S5PC1XX_GPIO_H2_START + (_nr))
-#define S5PC1XX_GPH3(_nr)	(S5PC1XX_GPIO_H3_START + (_nr))
-#define S5PC1XX_GPI(_nr)	(S5PC1XX_GPIO_I_START + (_nr))
-#define S5PC1XX_GPJ0(_nr)	(S5PC1XX_GPIO_J0_START + (_nr))
-#define S5PC1XX_GPJ1(_nr)	(S5PC1XX_GPIO_J1_START + (_nr))
-#define S5PC1XX_GPJ2(_nr)	(S5PC1XX_GPIO_J2_START + (_nr))
-#define S5PC1XX_GPJ3(_nr)	(S5PC1XX_GPIO_J3_START + (_nr))
-#define S5PC1XX_GPJ4(_nr)	(S5PC1XX_GPIO_J4_START + (_nr))
-#define S5PC1XX_GPK0(_nr)	(S5PC1XX_GPIO_K0_START + (_nr))
-#define S5PC1XX_GPK1(_nr)	(S5PC1XX_GPIO_K1_START + (_nr))
-#define S5PC1XX_GPK2(_nr)	(S5PC1XX_GPIO_K2_START + (_nr))
-#define S5PC1XX_GPK3(_nr)	(S5PC1XX_GPIO_K3_START + (_nr))
-#define S5PC1XX_MP00(_nr)	(S5PC1XX_GPIO_MP00_START + (_nr))
-#define S5PC1XX_MP01(_nr)	(S5PC1XX_GPIO_MP01_START + (_nr))
-#define S5PC1XX_MP02(_nr)	(S5PC1XX_GPIO_MP02_START + (_nr))
-#define S5PC1XX_MP03(_nr)	(S5PC1XX_GPIO_MP03_START + (_nr))
-#define S5PC1XX_MP04(_nr)	(S5PC1XX_GPIO_MP04_START + (_nr))
+/* S5PC100 GPIO number definitions. */
+#define S5PC100_GPA0(_nr)	(S5PC100_GPIO_A0_START + (_nr))
+#define S5PC100_GPA1(_nr)	(S5PC100_GPIO_A1_START + (_nr))
+#define S5PC100_GPB(_nr)	(S5PC100_GPIO_B_START + (_nr))
+#define S5PC100_GPC(_nr)	(S5PC100_GPIO_C_START + (_nr))
+#define S5PC100_GPD(_nr)	(S5PC100_GPIO_D_START + (_nr))
+#define S5PC100_GPE0(_nr)	(S5PC100_GPIO_E0_START + (_nr))
+#define S5PC100_GPE1(_nr)	(S5PC100_GPIO_E1_START + (_nr))
+#define S5PC100_GPF0(_nr)	(S5PC100_GPIO_F0_START + (_nr))
+#define S5PC100_GPF1(_nr)	(S5PC100_GPIO_F1_START + (_nr))
+#define S5PC100_GPF2(_nr)	(S5PC100_GPIO_F2_START + (_nr))
+#define S5PC100_GPF3(_nr)	(S5PC100_GPIO_F3_START + (_nr))
+#define S5PC100_GPG0(_nr)	(S5PC100_GPIO_G0_START + (_nr))
+#define S5PC100_GPG1(_nr)	(S5PC100_GPIO_G1_START + (_nr))
+#define S5PC100_GPG2(_nr)	(S5PC100_GPIO_G2_START + (_nr))
+#define S5PC100_GPG3(_nr)	(S5PC100_GPIO_G3_START + (_nr))
+#define S5PC100_GPH0(_nr)	(S5PC100_GPIO_H0_START + (_nr))
+#define S5PC100_GPH1(_nr)	(S5PC100_GPIO_H1_START + (_nr))
+#define S5PC100_GPH2(_nr)	(S5PC100_GPIO_H2_START + (_nr))
+#define S5PC100_GPH3(_nr)	(S5PC100_GPIO_H3_START + (_nr))
+#define S5PC100_GPI(_nr)	(S5PC100_GPIO_I_START + (_nr))
+#define S5PC100_GPJ0(_nr)	(S5PC100_GPIO_J0_START + (_nr))
+#define S5PC100_GPJ1(_nr)	(S5PC100_GPIO_J1_START + (_nr))
+#define S5PC100_GPJ2(_nr)	(S5PC100_GPIO_J2_START + (_nr))
+#define S5PC100_GPJ3(_nr)	(S5PC100_GPIO_J3_START + (_nr))
+#define S5PC100_GPJ4(_nr)	(S5PC100_GPIO_J4_START + (_nr))
+#define S5PC100_GPK0(_nr)	(S5PC100_GPIO_K0_START + (_nr))
+#define S5PC100_GPK1(_nr)	(S5PC100_GPIO_K1_START + (_nr))
+#define S5PC100_GPK2(_nr)	(S5PC100_GPIO_K2_START + (_nr))
+#define S5PC100_GPK3(_nr)	(S5PC100_GPIO_K3_START + (_nr))
+#define S5PC100_GPL0(_nr)	(S5PC100_GPIO_L0_START + (_nr))
+#define S5PC100_GPL1(_nr)	(S5PC100_GPIO_L1_START + (_nr))
+#define S5PC100_GPL2(_nr)	(S5PC100_GPIO_L2_START + (_nr))
+#define S5PC100_GPL3(_nr)	(S5PC100_GPIO_L3_START + (_nr))
+#define S5PC100_GPL4(_nr)	(S5PC100_GPIO_L4_START + (_nr))
+#define S5PC100_MP00(_nr)	(S5PC100_GPIO_MP00_START + (_nr))
+#define S5PC100_MP01(_nr)	(S5PC100_GPIO_MP01_START + (_nr))
+#define S5PC100_MP02(_nr)	(S5PC100_GPIO_MP02_START + (_nr))
+#define S5PC100_MP03(_nr)	(S5PC100_GPIO_MP03_START + (_nr))
+#define S5PC100_MP04(_nr)	(S5PC100_GPIO_MP04_START + (_nr))
+#define S5PC100_MP05(_nr)	(S5PC100_GPIO_MP05_START + (_nr))
 
-/* the end of the S5PC1XX specific gpios */
-#define S5PC1XX_GPIO_END	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
-#define S3C_GPIO_END		S5PC1XX_GPIO_END
+/* It used the end of the S5PC1XX gpios */
+#define S3C_GPIO_END		S5PC100_GPIO_END
 
 /* define the number of gpios we need to the one after the MP04() range */
-#define ARCH_NR_GPIOS	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
 
 #include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 622720dba289..b53fa48a52c6 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -11,4 +11,9 @@
 
 #include <plat/irqs.h>
 
+/* LCD */
+#define IRQ_LCD_FIFO		IRQ_LCD0
+#define IRQ_LCD_VSYNC		IRQ_LCD1
+#define IRQ_LCD_SYSTEM		IRQ_LCD2
+
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 9e9f39130b2c..4681ebe8bef6 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -17,6 +17,19 @@
 
 #include <plat/map-base.h>
 
+/*
+ * map-base.h has already defined virtual memory address
+ * S3C_VA_IRQ		S3C_ADDR(0x00000000)	irq controller(s)
+ * S3C_VA_SYS		S3C_ADDR(0x00100000)	system control
+ * S3C_VA_MEM		S3C_ADDR(0x00200000)	system control (not used)
+ * S3C_VA_TIMER		S3C_ADDR(0x00300000)	timer block
+ * S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	watchdog
+ * S3C_VA_UART		S3C_ADDR(0x01000000)	UART
+ *
+ * S5PC100 specific virtual memory address can be defined here
+ * S5PC1XX_VA_GPIO	S3C_ADDR(0x00500000)	GPIO
+ *
+ */
 
 /* Chip ID */
 #define S5PC100_PA_CHIPID	(0xE0000000)
@@ -24,13 +37,20 @@
 #define S5PC1XX_VA_CHIPID	S3C_VA_SYS
 
 /* System */
-#define S5PC100_PA_SYS		(0xE0100000)
-#define S5PC100_PA_CLK		(S5PC100_PA_SYS + 0x0)
-#define S5PC100_PA_PWR		(S5PC100_PA_SYS + 0x8000)
+#define S5PC100_PA_CLK		(0xE0100000)
+#define S5PC100_PA_CLK_OTHER	(0xE0200000)
+#define S5PC100_PA_PWR		(0xE0108000)
 #define S5PC1XX_PA_CLK		S5PC100_PA_CLK
 #define S5PC1XX_PA_PWR		S5PC100_PA_PWR
+#define S5PC1XX_PA_CLK_OTHER	S5PC100_PA_CLK_OTHER
 #define S5PC1XX_VA_CLK		(S3C_VA_SYS + 0x10000)
 #define S5PC1XX_VA_PWR		(S3C_VA_SYS + 0x20000)
+#define S5PC1XX_VA_CLK_OTHER	(S3C_VA_SYS + 0x30000)
+
+/* GPIO */
+#define S5PC100_PA_GPIO		(0xE0300000)
+#define S5PC1XX_PA_GPIO		S5PC100_PA_GPIO
+#define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
 
 /* Interrupt */
 #define S5PC100_PA_VIC		(0xE4000000)
@@ -40,23 +60,64 @@
 #define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
 #define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
 
+/* DMA */
+#define S5PC100_PA_MDMA		(0xE8100000)
+#define S5PC100_PA_PDMA0	(0xE9000000)
+#define S5PC100_PA_PDMA1	(0xE9200000)
+
 /* Timer */
 #define S5PC100_PA_TIMER	(0xEA000000)
 #define S5PC1XX_PA_TIMER	S5PC100_PA_TIMER
 #define S5PC1XX_VA_TIMER	S3C_VA_TIMER
 
+/* RTC */
+#define S5PC100_PA_RTC		(0xEA300000)
+
 /* UART */
 #define S5PC100_PA_UART		(0xEC000000)
 #define S5PC1XX_PA_UART		S5PC100_PA_UART
 #define S5PC1XX_VA_UART		S3C_VA_UART
 
-/* IIC */
-#define S5PC100_PA_IIC		(0xEC100000)
+/* I2C */
+#define S5PC100_PA_I2C		(0xEC100000)
+#define S5PC100_PA_I2C1		(0xEC200000)
+
+/* USB HS OTG */
+#define S5PC100_PA_USB_HSOTG	(0xED200000)
+#define S5PC100_PA_USB_HSPHY	(0xED300000)
+
+/* SD/MMC */
+#define S5PC100_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
+#define S5PC100_PA_HSMMC0	S5PC100_PA_HSMMC(0)
+#define S5PC100_PA_HSMMC1	S5PC100_PA_HSMMC(1)
+#define S5PC100_PA_HSMMC2	S5PC100_PA_HSMMC(2)
+
+/* LCD */
+#define S5PC100_PA_FB		(0xEE000000)
+
+/* Multimedia */
+#define S5PC100_PA_G2D		(0xEE800000)
+#define S5PC100_PA_JPEG		(0xEE500000)
+#define S5PC100_PA_ROTATOR	(0xEE100000)
+#define S5PC100_PA_G3D		(0xEF000000)
+
+/* I2S */
+#define S5PC100_PA_I2S0		(0xF2000000)
+#define S5PC100_PA_I2S1		(0xF2100000)
+#define S5PC100_PA_I2S2		(0xF2200000)
+
+/* KEYPAD */
+#define S5PC100_PA_KEYPAD	(0xF3100000)
+
+/* ADC & TouchScreen */
+#define S5PC100_PA_TSADC	(0xF3000000)
 
 /* ETC */
 #define S5PC100_PA_SDRAM	(0x20000000)
+#define S5PC1XX_PA_SDRAM	S5PC100_PA_SDRAM
 
 /* compatibility defines. */
+#define S3C_PA_RTC		S5PC100_PA_RTC
 #define S3C_PA_UART		S5PC100_PA_UART
 #define S3C_PA_UART0		(S5PC100_PA_UART + 0x0)
 #define S3C_PA_UART1		(S5PC100_PA_UART + 0x400)
@@ -67,9 +128,23 @@
 #define S3C_VA_UART2		(S3C_VA_UART + 0x800)
 #define S3C_VA_UART3		(S3C_VA_UART + 0xC00)
 #define S3C_UART_OFFSET		0x400
+#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S3C_PA_FB		S5PC100_PA_FB
+#define S3C_PA_G2D		S5PC100_PA_G2D
+#define S3C_PA_G3D		S5PC100_PA_G3D
+#define S3C_PA_JPEG		S5PC100_PA_JPEG
+#define S3C_PA_ROTATOR		S5PC100_PA_ROTATOR
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x0)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
 #define S3C_VA_VIC2		(S3C_VA_IRQ + 0x20000)
-#define S3C_PA_IIC		S5PC100_PA_IIC
+#define S3C_PA_IIC		S5PC100_PA_I2C
+#define S3C_PA_IIC1		S5PC100_PA_I2C1
+#define S3C_PA_USB_HSOTG	S5PC100_PA_USB_HSOTG
+#define S3C_PA_USB_HSPHY	S5PC100_PA_USB_HSPHY
+#define S3C_PA_HSMMC0		S5PC100_PA_HSMMC0
+#define S3C_PA_HSMMC1		S5PC100_PA_HSMMC1
+#define S3C_PA_HSMMC2		S5PC100_PA_HSMMC2
+#define S3C_PA_KEYPAD		S5PC100_PA_KEYPAD
+#define S3C_PA_TSADC		S5PC100_PA_TSADC
 
 #endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
new file mode 100644
index 000000000000..1732cd28c765
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
@@ -0,0 +1,139 @@
+/* arch/arm/mach-s5pc100/include/mach/regs-fb.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *   Pawel Osciak <p.osciak@samsung.com>
+ *
+ * Framebuffer register definitions for Samsung S5PC100.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_FB_H
+#define __ASM_ARCH_REGS_FB_H __FILE__
+
+#include <plat/regs-fb-v4.h>
+
+/* VP1 interface timing control */
+#define VP1CON0						(0x118)
+#define VP1_RATECON_EN					(1 << 31)
+#define VP1_CLKRATE_MASK				(0xff)
+
+#define VP1CON1						(0x11c)
+#define VP1_VTREGCON_EN					(1 << 31)
+#define VP1_VBPD_MASK					(0xfff)
+#define VP1_VBPD_SHIFT					(16)
+
+
+#define WPALCON_H					(0x19c)
+#define WPALCON_L					(0x1a0)
+
+/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but
+ * different for WPAL2-4
+ */
+/* In WPALCON_L (aka WPALCON) */
+#define WPALCON_W1PAL_32BPP_A888			(0x7 << 3)
+#define WPALCON_W0PAL_32BPP_A888			(0x7 << 0)
+
+/* To set W2PAL-W4PAL consist of one bit from WPALCON_L and two from WPALCON_H,
+ * e.g. W2PAL[2..0] is made of (WPALCON_H[10..9], WPALCON_L[6]).
+ */
+#define WPALCON_L_WxPAL_L_MASK				(0x1)
+#define WPALCON_L_W2PAL_L_SHIFT				(6)
+#define WPALCON_L_W3PAL_L_SHIFT				(7)
+#define WPALCON_L_W4PAL_L_SHIFT				(8)
+
+#define WPALCON_L_WxPAL_H_MASK				(0x3)
+#define WPALCON_H_W2PAL_H_SHIFT				(9)
+#define WPALCON_H_W3PAL_H_SHIFT				(13)
+#define WPALCON_H_W4PAL_H_SHIFT				(17)
+
+/* Per-window alpha value registers */
+/* For window 0 8-bit alpha values are in VIDW0ALPHAx,
+ * for windows 1-4 alpha values consist of two parts, the 4 low bits are
+ * taken from VIDWxALPHAx and 4 high bits are from VIDOSDxC,
+ * e.g. WIN1_ALPHA0_B[7..0] = (VIDOSD1C[3..0], VIDW1ALPHA0[3..0])
+ */
+#define VIDWxALPHA0(_win)				(0x200 + (_win * 8))
+#define VIDWxALPHA1(_win)				(0x204 + (_win * 8))
+
+/* Only for window 0 in VIDW0ALPHAx. */
+#define VIDW0ALPHAx_R(_x)				((_x) << 16)
+#define VIDW0ALPHAx_R_MASK				(0xff << 16)
+#define VIDW0ALPHAx_R_SHIFT				(16)
+#define VIDW0ALPHAx_G(_x)				((_x) << 8)
+#define VIDW0ALPHAx_G_MASK				(0xff << 8)
+#define VIDW0ALPHAx_G_SHIFT				(8)
+#define VIDW0ALPHAx_B(_x)				((_x) << 0)
+#define VIDW0ALPHAx_B_MASK				(0xff << 0)
+#define VIDW0ALPHAx_B_SHIFT				(0)
+
+/* Low 4 bits of alpha0-1 for windows 1-4 */
+#define VIDW14ALPHAx_R_L(_x)				((_x) << 16)
+#define VIDW14ALPHAx_R_L_MASK				(0xf << 16)
+#define VIDW14ALPHAx_R_L_SHIFT				(16)
+#define VIDW14ALPHAx_G_L(_x)				((_x) << 8)
+#define VIDW14ALPHAx_G_L_MASK				(0xf << 8)
+#define VIDW14ALPHAx_G_L_SHIFT				(8)
+#define VIDW14ALPHAx_B_L(_x)				((_x) << 0)
+#define VIDW14ALPHAx_B_L_MASK				(0xf << 0)
+#define VIDW14ALPHAx_B_L_SHIFT				(0)
+
+
+/* Per-window blending equation control registers */
+#define BLENDEQx(_win)					(0x244 + ((_win) * 4))
+#define BLENDEQ1					(0x244)
+#define BLENDEQ2					(0x248)
+#define BLENDEQ3					(0x24c)
+#define BLENDEQ4					(0x250)
+
+#define BLENDEQx_Q_FUNC(_x)				((_x) << 18)
+#define BLENDEQx_Q_FUNC_MASK				(0xf << 18)
+#define BLENDEQx_P_FUNC(_x)				((_x) << 12)
+#define BLENDEQx_P_FUNC_MASK				(0xf << 12)
+#define BLENDEQx_B_FUNC(_x)				((_x) << 6)
+#define BLENDEQx_B_FUNC_MASK				(0xf << 6)
+#define BLENDEQx_A_FUNC(_x)				((_x) << 0)
+#define BLENDEQx_A_FUNC_MASK				(0xf << 0)
+
+#define BLENDCON					(0x260)
+#define BLENDCON_8BIT_ALPHA				(1 << 0)
+
+/* Per-window palette base addresses (start of palette memory).
+ * Each window palette area consists of 256 32-bit entries.
+ * START is the first address (entry 0th), END is the address of 255th entry.
+ */
+#define WIN0_PAL_BASE					(0x2400)
+#define WIN0_PAL_END					(0x27fc)
+#define WIN1_PAL_BASE					(0x2800)
+#define WIN1_PAL_END					(0x2bfc)
+#define WIN2_PAL_BASE					(0x2c00)
+#define WIN2_PAL_END					(0x2ffc)
+#define WIN3_PAL_BASE					(0x3000)
+#define WIN3_PAL_END					(0x33fc)
+#define WIN4_PAL_BASE					(0x3400)
+#define WIN4_PAL_END					(0x37fc)
+
+#define WIN0_PAL(_entry)			(WIN0_PAL_BASE + ((_entry) * 4))
+#define WIN1_PAL(_entry)			(WIN1_PAL_BASE + ((_entry) * 4))
+#define WIN2_PAL(_entry)			(WIN2_PAL_BASE + ((_entry) * 4))
+#define WIN3_PAL(_entry)			(WIN3_PAL_BASE + ((_entry) * 4))
+#define WIN4_PAL(_entry)			(WIN4_PAL_BASE + ((_entry) * 4))
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+	switch (window) {
+	case 0: return WIN0_PAL(reg);
+	case 1: return WIN1_PAL(reg);
+	case 2: return WIN2_PAL(reg);
+	case 3: return WIN3_PAL(reg);
+	case 4: return WIN4_PAL(reg);
+	}
+
+	BUG();
+}
+
+
+#endif /* __ASM_ARCH_REGS_FB_H */
+
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index e39014375470..f0d31a2a598c 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -11,14 +11,21 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
+#include <linux/io.h>
+#include <mach/map.h>
+#include <plat/regs-clock.h>
+
+void (*s5pc1xx_idle)(void);
+
 static void arch_idle(void)
 {
-	/* nothing here yet */
+	if (s5pc1xx_idle)
+		s5pc1xx_idle();
 }
 
 static void arch_reset(char mode, const char *cmd)
 {
-	/* nothing here yet */
+	__raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET);
+	return;
 }
-
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 214093cd7632..ae3c52cd0ebb 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -27,16 +27,22 @@
 #include <asm/mach/map.h>
 
 #include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <video/platform_lcd.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-gpio.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/s5pc100.h>
+#include <plat/fb.h>
+#include <plat/iic.h>
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -73,9 +79,78 @@ static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
 	},
 };
 
+/* I2C0 */
+static struct i2c_board_info i2c_devs0[] __initdata = {
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c_devs1[] __initdata = {
+};
+
+/* LCD power controller */
+static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	/* backlight */
+	gpio_direction_output(S5PC100_GPD(0), power);
+
+	if (power) {
+		/* module reset */
+		gpio_direction_output(S5PC100_GPH0(6), 1);
+		mdelay(100);
+		gpio_direction_output(S5PC100_GPH0(6), 0);
+		mdelay(10);
+		gpio_direction_output(S5PC100_GPH0(6), 1);
+		mdelay(10);
+	}
+}
+
+static struct plat_lcd_data smdkc100_lcd_power_data = {
+	.set_power	= smdkc100_lcd_power_set,
+};
+
+static struct platform_device smdkc100_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdkc100_lcd_power_data,
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdkc100_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.refresh	= 70,
+		.pixclock	= (8+13+3+800)*(7+5+1+480),
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
+	.win[0]		= &smdkc100_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5pc100_fb_gpio_setup_24bpp,
+};
+
 static struct map_desc smdkc100_iodesc[] = {};
 
 static struct platform_device *smdkc100_devices[] __initdata = {
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_fb,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&smdkc100_lcd_powerdev,
 };
 
 static void __init smdkc100_map_io(void)
@@ -87,12 +162,24 @@ static void __init smdkc100_map_io(void)
 
 static void __init smdkc100_machine_init(void)
 {
+	/* I2C */
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+	s3c_fb_set_platdata(&smdkc100_lcd_pdata);
+
+	/* LCD init */
+	gpio_request(S5PC100_GPD(0), "GPD");
+	gpio_request(S5PC100_GPH0(6), "GPH0");
+	smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
 	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
 }
 
 MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.phys_io	= S5PC1XX_PA_UART & 0xfff00000,
+	.phys_io	= S5PC100_PA_UART & 0xfff00000,
 	.io_pg_offst	= (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5PC100_PA_SDRAM + 0x100,
 
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
new file mode 100644
index 000000000000..4385986a3da0
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pc100/setup-sdhci.c
+ *
+ * Copyright 2008 Samsung Electronics
+ *
+ * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * Based on mach-s3c6410/setup-sdhci.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pc100_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	/* [2] = "mmc_bus", not yet succesfuuly used yet */
+	/* [3] = "48m", - note not succesfully used yet */
+};
+
+
+void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+				    void __iomem *r,
+				    struct mmc_ios *ios,
+				    struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	/* don't need to alter anything acording to card-type */
+
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 4e5c07f4e456..03a7f3857c5e 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -53,23 +53,23 @@ config SA1100_COLLIE
 
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
+	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3100 handheld computer.  Information about this machine and the
 	  Linux port to this machine can be found at:
 
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
-	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
+	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3600 handheld computer.  Information about this machine and the
 	  Linux port to this machine can be found at:
 
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
-	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index bb7b8198d0c4..89349c1dd7a6 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -25,8 +25,8 @@ led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
 
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
 
-obj-$(CONFIG_SA1100_H3100)		+= h3600.o
-obj-$(CONFIG_SA1100_H3600)		+= h3600.o
+obj-$(CONFIG_SA1100_H3100)		+= h3100.o h3xxx.o
+obj-$(CONFIG_SA1100_H3600)		+= h3600.o h3xxx.o
 
 obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
 led-$(CONFIG_SA1100_HACKKIT)		+= leds-hackkit.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 55e64477a876..169e5b87dbff 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -249,10 +249,10 @@ static void __init assabet_init(void)
 #endif
 	}
 
-	sa11x0_set_flash_data(&assabet_flash_data, assabet_flash_resources,
-			      ARRAY_SIZE(assabet_flash_resources));
-	sa11x0_set_irda_data(&assabet_irda_data);
-	sa11x0_set_mcp_data(&assabet_mcp_data);
+	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
+			    ARRAY_SIZE(assabet_flash_resources));
+	sa11x0_register_irda(&assabet_irda_data);
+	sa11x0_register_mcp(&assabet_mcp_data);
 }
 
 /*
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index ab5883b39ddf..051ec0f0023c 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -212,7 +212,7 @@ static int __init badge4_init(void)
 	/* maybe turn on 5v0 from the start */
 	badge4_set_5V(BADGE4_5V_INITIALLY, five_v_on);
 
-	sa11x0_set_flash_data(&badge4_flash_data, &badge4_flash_resource, 1);
+	sa11x0_register_mtd(&badge4_flash_data, &badge4_flash_resource, 1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index fd3ad9cfc912..bc950ef418af 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -129,8 +129,8 @@ static struct mcp_plat_data cerf_mcp_data = {
 static void __init cerf_init(void)
 {
 	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
-	sa11x0_set_flash_data(&cerf_flash_data, &cerf_flash_resource, 1);
-	sa11x0_set_mcp_data(&cerf_mcp_data);
+	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
+	sa11x0_register_mcp(&cerf_mcp_data);
 }
 
 MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index bbf2ebcc3066..9982c5c28edf 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -26,6 +26,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
 #include <linux/gpio.h>
+#include <linux/pda_power.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -56,6 +57,7 @@ static struct resource collie_scoop_resources[] = {
 static struct scoop_config collie_scoop_setup = {
 	.io_dir 	= COLLIE_SCOOP_IO_DIR,
 	.io_out		= COLLIE_SCOOP_IO_OUT,
+	.gpio_base	= COLLIE_SCOOP_GPIO_BASE,
 };
 
 struct platform_device colliescoop_device = {
@@ -85,6 +87,70 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
 static struct mcp_plat_data collie_mcp_data = {
 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
 	.sclk_rate	= 9216000,
+	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
+};
+
+/*
+ * Collie AC IN
+ */
+static int collie_power_init(struct device *dev)
+{
+	int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in");
+	if (ret)
+		goto err_gpio_req;
+
+	ret = gpio_direction_input(COLLIE_GPIO_AC_IN);
+	if (ret)
+		goto err_gpio_in;
+
+	return 0;
+
+err_gpio_in:
+	gpio_free(COLLIE_GPIO_AC_IN);
+err_gpio_req:
+	return ret;
+}
+
+static void collie_power_exit(struct device *dev)
+{
+	gpio_free(COLLIE_GPIO_AC_IN);
+}
+
+static int collie_power_ac_online(void)
+{
+	return gpio_get_value(COLLIE_GPIO_AC_IN) == 2;
+}
+
+static char *collie_ac_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+};
+
+static struct pda_power_pdata collie_power_data = {
+	.init			= collie_power_init,
+	.is_ac_online		= collie_power_ac_online,
+	.exit			= collie_power_exit,
+	.supplied_to		= collie_ac_supplied_to,
+	.num_supplicants	= ARRAY_SIZE(collie_ac_supplied_to),
+};
+
+static struct resource collie_power_resource[] = {
+	{
+		.name		= "ac",
+		.start		= gpio_to_irq(COLLIE_GPIO_AC_IN),
+		.end		= gpio_to_irq(COLLIE_GPIO_AC_IN),
+		.flags		= IORESOURCE_IRQ |
+				  IORESOURCE_IRQ_HIGHEDGE |
+				  IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device collie_power_device = {
+	.name			= "pda-power",
+	.id			= -1,
+	.dev.platform_data	= &collie_power_data,
+	.resource		= collie_power_resource,
+	.num_resources		= ARRAY_SIZE(collie_power_resource),
 };
 
 #ifdef CONFIG_SHARP_LOCOMO
@@ -178,6 +244,7 @@ struct platform_device collie_locomo_device = {
 static struct platform_device *devices[] __initdata = {
 	&collie_locomo_device,
 	&colliescoop_device,
+	&collie_power_device,
 };
 
 static struct mtd_partition collie_partitions[] = {
@@ -248,22 +315,24 @@ static void __init collie_init(void)
 	GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
 		GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
 		GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
-		COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
-		COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+		_COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
+		_COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
 
 	PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
 		PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
 		PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
 
-	PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
-		COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
+	PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY |
+		_COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
 
-	PGSR = COLLIE_GPIO_nREMOCON_ON;
+	PGSR = _COLLIE_GPIO_nREMOCON_ON;
 
 	PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
 
 	PCFR = PCFR_OPDE;
 
+	GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
+
 
 	platform_scoop_config = &collie_pcmcia_config;
 
@@ -272,9 +341,9 @@ static void __init collie_init(void)
 		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
 	}
 
-	sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources,
-			      ARRAY_SIZE(collie_flash_resources));
-	sa11x0_set_mcp_data(&collie_mcp_data);
+	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
+			    ARRAY_SIZE(collie_flash_resources));
+	sa11x0_register_mcp(&collie_mcp_data);
 
 	sharpsl_save_param();
 }
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index cb4521a6f42d..ad660350c296 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -65,7 +65,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 
 
 /**
- *	sa1100_request_dma - allocate one of the SA11x0's DMA chanels
+ *	sa1100_request_dma - allocate one of the SA11x0's DMA channels
  *	@device: The SA11x0 peripheral targeted by this request
  *	@device_id: An ascii name for the claiming device
  *	@callback: Function to be called when the DMA completes
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 23cfdd593954..9faea1511c1f 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -162,6 +162,17 @@ static void sa1100_power_off(void)
 	PMCR = PMCR_SF;
 }
 
+static void sa11x0_register_device(struct platform_device *dev, void *data)
+{
+	int err;
+	dev->dev.platform_data = data;
+	err = platform_device_register(dev);
+	if (err)
+		printk(KERN_ERR "Unable to register device %s: %d\n",
+			dev->name, err);
+}
+
+
 static struct resource sa11x0udc_resources[] = {
 	[0] = {
 		.start	= 0x80000000,
@@ -234,9 +245,9 @@ static struct platform_device sa11x0mcp_device = {
 	.resource	= sa11x0mcp_resources,
 };
 
-void sa11x0_set_mcp_data(struct mcp_plat_data *data)
+void sa11x0_register_mcp(struct mcp_plat_data *data)
 {
-	sa11x0mcp_device.dev.platform_data = data;
+	sa11x0_register_device(&sa11x0mcp_device, data);
 }
 
 static struct resource sa11x0ssp_resources[] = {
@@ -293,13 +304,13 @@ static struct platform_device sa11x0mtd_device = {
 	.id		= -1,
 };
 
-void sa11x0_set_flash_data(struct flash_platform_data *flash,
-			   struct resource *res, int nr)
+void sa11x0_register_mtd(struct flash_platform_data *flash,
+			 struct resource *res, int nr)
 {
 	flash->name = "sa1100";
-	sa11x0mtd_device.dev.platform_data = flash;
 	sa11x0mtd_device.resource = res;
 	sa11x0mtd_device.num_resources = nr;
+	sa11x0_register_device(&sa11x0mtd_device, flash);
 }
 
 static struct resource sa11x0ir_resources[] = {
@@ -329,9 +340,9 @@ static struct platform_device sa11x0ir_device = {
 	.resource	= sa11x0ir_resources,
 };
 
-void sa11x0_set_irda_data(struct irda_platform_data *irda)
+void sa11x0_register_irda(struct irda_platform_data *irda)
 {
-	sa11x0ir_device.dev.platform_data = irda;
+	sa11x0_register_device(&sa11x0ir_device, irda);
 }
 
 static struct platform_device sa11x0rtc_device = {
@@ -343,21 +354,15 @@ static struct platform_device *sa11x0_devices[] __initdata = {
 	&sa11x0udc_device,
 	&sa11x0uart1_device,
 	&sa11x0uart3_device,
-	&sa11x0mcp_device,
 	&sa11x0ssp_device,
 	&sa11x0pcmcia_device,
 	&sa11x0fb_device,
-	&sa11x0mtd_device,
 	&sa11x0rtc_device,
 };
 
 static int __init sa1100_init(void)
 {
 	pm_power_off = sa1100_power_off;
-
-	if (sa11x0ir_device.dev.platform_data)
-		platform_device_register(&sa11x0ir_device);
-
 	return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
 }
 
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 793c2e6c991f..ec03f187c52b 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -32,14 +32,11 @@ extern unsigned int sa11x0_ppcr_to_freq(unsigned int idx);
 struct flash_platform_data;
 struct resource;
 
-extern void sa11x0_set_flash_data(struct flash_platform_data *flash,
-				  struct resource *res, int nr);
-
-struct sa11x0_ssp_plat_ops;
-extern void sa11x0_set_ssp_data(struct sa11x0_ssp_plat_ops *ops);
+void sa11x0_register_mtd(struct flash_platform_data *flash,
+			 struct resource *res, int nr);
 
 struct irda_platform_data;
-void sa11x0_set_irda_data(struct irda_platform_data *irda);
+void sa11x0_register_irda(struct irda_platform_data *irda);
 
 struct mcp_plat_data;
-void sa11x0_set_mcp_data(struct mcp_plat_data *data);
+void sa11x0_register_mcp(struct mcp_plat_data *data);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
new file mode 100644
index 000000000000..0c7cea0dc013
--- /dev/null
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -0,0 +1,95 @@
+/*
+ * Support for Compaq iPAQ H3100 handheld computer
+ *
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irda.h>
+
+#include <mach/h3xxx.h>
+
+#include "generic.h"
+
+/*
+ * helper for sa1100fb
+ */
+static void h3100_lcd_power(int enable)
+{
+	if (!gpio_request(H3XXX_EGPIO_LCD_ON, "LCD ON")) {
+		gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
+		gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
+		gpio_free(H3XXX_EGPIO_LCD_ON);
+	} else {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
+	}
+}
+
+
+static void __init h3100_map_io(void)
+{
+	h3xxx_map_io();
+
+	sa1100fb_lcd_power = h3100_lcd_power;
+
+	/* Older bootldrs put GPIO2-9 in alternate mode on the
+	   assumption that they are used for video */
+	GAFR &= ~0x000001fb;
+}
+
+/*
+ * This turns the IRDA power on or off on the Compaq H3100
+ */
+static int h3100_irda_set_power(struct device *dev, unsigned int state)
+{
+	gpio_set_value(H3100_GPIO_IR_ON, state);
+	return 0;
+}
+
+static void h3100_irda_set_speed(struct device *dev, unsigned int speed)
+{
+	gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000));
+}
+
+static struct irda_platform_data h3100_irda_data = {
+	.set_power	= h3100_irda_set_power,
+	.set_speed	= h3100_irda_set_speed,
+};
+
+static struct gpio_default_state h3100_default_gpio[] = {
+	{ H3100_GPIO_IR_ON,	GPIO_MODE_OUT0, "IrDA power" },
+	{ H3100_GPIO_IR_FSEL,	GPIO_MODE_OUT0, "IrDA fsel" },
+	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
+	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
+	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
+	{ H3100_GPIO_LCD_3V_ON,	GPIO_MODE_OUT0,	"LCD 3v" },
+};
+
+static void __init h3100_mach_init(void)
+{
+	h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
+	h3xxx_mach_init();
+	sa11x0_register_irda(&h3100_irda_data);
+}
+
+MACHINE_START(H3100, "Compaq iPAQ H3100")
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= h3100_map_io,
+	.init_irq	= sa1100_init_irq,
+	.timer		= &sa1100_timer,
+	.init_machine	= h3100_mach_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 0eb2f159578b..af3b71459f8d 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -1,421 +1,127 @@
 /*
- * Hardware definitions for Compaq iPAQ H3xxx Handheld Computers
+ * Support for Compaq iPAQ H3600 handheld computer
  *
- * Copyright 2000,1 Compaq Computer Corporation.
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
  *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??	Andrew Christian   Added support for iPAQ H3800
- *				   and abstracted EGPIO interface.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
  */
-#include <linux/module.h>
+
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/pm.h>
-#include <linux/device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/serial_core.h>
+#include <linux/gpio.h>
 
-#include <asm/irq.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/irda.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
 
-#include <mach/h3600.h>
-#include <mach/h3600_gpio.h>
+#include <mach/h3xxx.h>
 
 #include "generic.h"
 
-void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-EXPORT_SYMBOL(assign_h3600_egpio);
-
-static struct mtd_partition h3xxx_partitions[] = {
-	{
-		.name		= "H3XXX boot firmware",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "H3XXX rootfs",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00040000,
-	}
-};
-
-static void h3xxx_set_vpp(int vpp)
-{
-	assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, vpp);
-}
-
-static struct flash_platform_data h3xxx_flash_data = {
-	.map_name	= "cfi_probe",
-	.set_vpp	= h3xxx_set_vpp,
-	.parts		= h3xxx_partitions,
-	.nr_parts	= ARRAY_SIZE(h3xxx_partitions),
-};
-
-static struct resource h3xxx_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
 /*
- * This turns the IRDA power on or off on the Compaq H3600
- */
-static int h3600_irda_set_power(struct device *dev, unsigned int state)
-{
-	assign_h3600_egpio( IPAQ_EGPIO_IR_ON, state );
-
-	return 0;
-}
-
-static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	assign_h3600_egpio(IPAQ_EGPIO_IR_FSEL, !(speed < 4000000));
-}
-
-static struct irda_platform_data h3600_irda_data = {
-	.set_power	= h3600_irda_set_power,
-	.set_speed	= h3600_irda_set_speed,
-};
-
-static void h3xxx_mach_init(void)
-{
-	sa11x0_set_flash_data(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
-	sa11x0_set_irda_data(&h3600_irda_data);
-}
-
-/*
- * low-level UART features
+ * helper for sa1100fb
  */
-
-static void h3600_uart_set_mctrl(struct uart_port *port, u_int mctrl)
+static void h3600_lcd_power(int enable)
 {
-	if (port->mapbase == _Ser3UTCR0) {
-		if (mctrl & TIOCM_RTS)
-			GPCR = GPIO_H3600_COM_RTS;
-		else
-			GPSR = GPIO_H3600_COM_RTS;
+	if (gpio_request(H3XXX_EGPIO_LCD_ON, "LCD power")) {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
+		goto err1;
 	}
-}
-
-static u_int h3600_uart_get_mctrl(struct uart_port *port)
-{
-	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
-	if (port->mapbase == _Ser3UTCR0) {
-		int gplr = GPLR;
-		/* DCD and CTS bits are inverted in GPLR by RS232 transceiver */
-		if (gplr & GPIO_H3600_COM_DCD)
-			ret &= ~TIOCM_CD;
-		if (gplr & GPIO_H3600_COM_CTS)
-			ret &= ~TIOCM_CTS;
+	if (gpio_request(H3600_EGPIO_LCD_PCI, "LCD control")) {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_PCI\n", __func__);
+		goto err2;
+	}
+	if (gpio_request(H3600_EGPIO_LCD_5V_ON, "LCD 5v")) {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_5V_ON\n", __func__);
+		goto err3;
+	}
+	if (gpio_request(H3600_EGPIO_LVDD_ON, "LCD 9v/-6.5v")) {
+		pr_err("%s: can't request H3600_EGPIO_LVDD_ON\n", __func__);
+		goto err4;
 	}
 
-	return ret;
-}
+	gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
+	gpio_direction_output(H3600_EGPIO_LCD_PCI, enable);
+	gpio_direction_output(H3600_EGPIO_LCD_5V_ON, enable);
+	gpio_direction_output(H3600_EGPIO_LVDD_ON, enable);
 
-static void h3600_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	if (port->mapbase == _Ser2UTCR0) { /* TODO: REMOVE THIS */
-		assign_h3600_egpio(IPAQ_EGPIO_IR_ON, !state);
-	} else if (port->mapbase == _Ser3UTCR0) {
-		assign_h3600_egpio(IPAQ_EGPIO_RS232_ON, !state);
-	}
+	gpio_free(H3600_EGPIO_LVDD_ON);
+err4:	gpio_free(H3600_EGPIO_LCD_5V_ON);
+err3:	gpio_free(H3600_EGPIO_LCD_PCI);
+err2:	gpio_free(H3XXX_EGPIO_LCD_ON);
+err1:	return;
 }
 
-/*
- * Enable/Disable wake up events for this serial port.
- * Obviously, we only support this on the normal COM port.
- */
-static int h3600_uart_set_wake(struct uart_port *port, u_int enable)
+static void __init h3600_map_io(void)
 {
-	int err = -EINVAL;
+	h3xxx_map_io();
 
-	if (port->mapbase == _Ser3UTCR0) {
-		if (enable)
-			PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
-		else
-			PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
-		err = 0;
-	}
-	return err;
+	sa1100fb_lcd_power = h3600_lcd_power;
 }
 
-static struct sa1100_port_fns h3600_port_fns __initdata = {
-	.set_mctrl	= h3600_uart_set_mctrl,
-	.get_mctrl	= h3600_uart_get_mctrl,
-	.pm		= h3600_uart_pm,
-	.set_wake	= h3600_uart_set_wake,
-};
-
 /*
- * helper for sa1100fb
+ * This turns the IRDA power on or off on the Compaq H3600
  */
-static void h3xxx_lcd_power(int enable)
+static int h3600_irda_set_power(struct device *dev, unsigned int state)
 {
-	assign_h3600_egpio(IPAQ_EGPIO_LCD_POWER, enable);
+	gpio_set_value(H3600_EGPIO_IR_ON, state);
+	return 0;
 }
 
-static struct map_desc h3600_io_desc[] __initdata = {
-  	{	/* static memory bank 2  CS#2 */
-		.virtual	=  H3600_BANK_2_VIRT,
-		.pfn		= __phys_to_pfn(SA1100_CS2_PHYS),
-		.length		= 0x02800000,
-		.type		= MT_DEVICE
-	}, {	/* static memory bank 4  CS#4 */
-		.virtual	=  H3600_BANK_4_VIRT,
-		.pfn		= __phys_to_pfn(SA1100_CS4_PHYS),
-		.length		= 0x00800000,
-		.type		= MT_DEVICE
-	}, {	/* EGPIO 0		CS#5 */
-		.virtual	=  H3600_EGPIO_VIRT,
-		.pfn		= __phys_to_pfn(H3600_EGPIO_PHYS),
-		.length		= 0x01000000,
-		.type		= MT_DEVICE
-	}
-};
-
-/*
- * Common map_io initialization
- */
-
-static void __init h3xxx_map_io(void)
+static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
 {
-	sa1100_map_io();
-	iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
-
-	sa1100_register_uart_fns(&h3600_port_fns);
-	sa1100_register_uart(0, 3); /* Common serial port */
-//	sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
-
-	/* Ensure those pins are outputs and driving low  */
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
-	/* Configure suspend conditions */
-	PGSR = 0;
-	PWER = PWER_GPIO0 | PWER_RTC;
-	PCFR = PCFR_OPDE;
-	PSDR = 0;
-
-	sa1100fb_lcd_power = h3xxx_lcd_power;
+	gpio_set_value(H3600_EGPIO_IR_FSEL, !(speed < 4000000));
 }
 
-/************************* H3100 *************************/
-
-#ifdef CONFIG_SA1100_H3100
-
-#define H3100_EGPIO	(*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3100_egpio = 0;
-
-static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
+static int h3600_irda_startup(struct device *dev)
 {
-	unsigned int egpio = 0;
-	long	     gpio = 0;
-	unsigned long flags;
-
-	switch (x) {
-	case IPAQ_EGPIO_LCD_POWER:
-		egpio |= EGPIO_H3600_LCD_ON;
-		gpio  |= GPIO_H3100_LCD_3V_ON;
-		break;
-	case IPAQ_EGPIO_LCD_ENABLE:
-		break;
-	case IPAQ_EGPIO_CODEC_NRESET:
-		egpio |= EGPIO_H3600_CODEC_NRESET;
-		break;
-	case IPAQ_EGPIO_AUDIO_ON:
-		gpio |= GPIO_H3100_AUD_PWR_ON
-			| GPIO_H3100_AUD_ON;
-		break;
-	case IPAQ_EGPIO_QMUTE:
-		gpio |= GPIO_H3100_QMUTE;
-		break;
-	case IPAQ_EGPIO_OPT_NVRAM_ON:
-		egpio |= EGPIO_H3600_OPT_NVRAM_ON;
-		break;
-	case IPAQ_EGPIO_OPT_ON:
-		egpio |= EGPIO_H3600_OPT_ON;
-		break;
-	case IPAQ_EGPIO_CARD_RESET:
-		egpio |= EGPIO_H3600_CARD_RESET;
-		break;
-	case IPAQ_EGPIO_OPT_RESET:
-		egpio |= EGPIO_H3600_OPT_RESET;
-		break;
-	case IPAQ_EGPIO_IR_ON:
-		gpio |= GPIO_H3100_IR_ON;
-		break;
-	case IPAQ_EGPIO_IR_FSEL:
-		gpio |= GPIO_H3100_IR_FSEL;
-		break;
-	case IPAQ_EGPIO_RS232_ON:
-		egpio |= EGPIO_H3600_RS232_ON;
-		break;
-	case IPAQ_EGPIO_VPP_ON:
-		egpio |= EGPIO_H3600_VPP_ON;
-		break;
-	}
+	int err = gpio_request(H3600_EGPIO_IR_ON, "IrDA power");
+	if (err)
+		goto err1;
+	err = gpio_direction_output(H3600_EGPIO_IR_ON, 0);
+	if (err)
+		goto err2;
+	err = gpio_request(H3600_EGPIO_IR_FSEL, "IrDA fsel");
+	if (err)
+		goto err2;
+	err = gpio_direction_output(H3600_EGPIO_IR_FSEL, 0);
+	if (err)
+		goto err3;
+	return 0;
 
-	if (egpio || gpio) {
-		local_irq_save(flags);
-		if (setp) {
-			h3100_egpio |= egpio;
-			GPSR = gpio;
-		} else {
-			h3100_egpio &= ~egpio;
-			GPCR = gpio;
-		}
-		H3100_EGPIO = h3100_egpio;
-		local_irq_restore(flags);
-	}
+err3:	gpio_free(H3600_EGPIO_IR_FSEL);
+err2:	gpio_free(H3600_EGPIO_IR_ON);
+err1:	return err;
 }
 
-#define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON	  \
-			  | GPIO_H3100_GPIO3	  \
-			  | GPIO_H3100_QMUTE	  \
-			  | GPIO_H3100_LCD_3V_ON  \
-			  | GPIO_H3100_AUD_ON	  \
-			  | GPIO_H3100_AUD_PWR_ON \
-			  | GPIO_H3100_IR_ON	  \
-			  | GPIO_H3100_IR_FSEL)
-
-static void __init h3100_map_io(void)
+static void h3600_irda_shutdown(struct device *dev)
 {
-	h3xxx_map_io();
-
-	/* Initialize h3100-specific values here */
-	GPCR = 0x0fffffff;	 /* All outputs are set low by default */
-	GPDR = GPIO_H3600_COM_RTS  | GPIO_H3600_L3_CLOCK |
-	       GPIO_H3600_L3_MODE  | GPIO_H3600_L3_DATA  |
-	       GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
-	       H3100_DIRECT_EGPIO;
-
-	/* Older bootldrs put GPIO2-9 in alternate mode on the
-	   assumption that they are used for video */
-	GAFR &= ~H3100_DIRECT_EGPIO;
-
-	H3100_EGPIO = h3100_egpio;
-	assign_h3600_egpio = h3100_control_egpio;
+	gpio_free(H3600_EGPIO_IR_ON);
+	gpio_free(H3600_EGPIO_IR_FSEL);
 }
 
-MACHINE_START(H3100, "Compaq iPAQ H3100")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
-	.boot_params	= 0xc0000100,
-	.map_io		= h3100_map_io,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= h3xxx_mach_init,
-MACHINE_END
-
-#endif /* CONFIG_SA1100_H3100 */
-
-/************************* H3600 *************************/
-
-#ifdef CONFIG_SA1100_H3600
-
-#define H3600_EGPIO	(*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3600_egpio = EGPIO_H3600_RS232_ON;
-
-static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
-{
-	unsigned int egpio = 0;
-	unsigned long flags;
-
-	switch (x) {
-	case IPAQ_EGPIO_LCD_POWER:
-		egpio |= EGPIO_H3600_LCD_ON |
-			 EGPIO_H3600_LCD_PCI |
-			 EGPIO_H3600_LCD_5V_ON |
-			 EGPIO_H3600_LVDD_ON;
-		break;
-	case IPAQ_EGPIO_LCD_ENABLE:
-		break;
-	case IPAQ_EGPIO_CODEC_NRESET:
-		egpio |= EGPIO_H3600_CODEC_NRESET;
-		break;
-	case IPAQ_EGPIO_AUDIO_ON:
-		egpio |= EGPIO_H3600_AUD_AMP_ON |
-			 EGPIO_H3600_AUD_PWR_ON;
-		break;
-	case IPAQ_EGPIO_QMUTE:
-		egpio |= EGPIO_H3600_QMUTE;
-		break;
-	case IPAQ_EGPIO_OPT_NVRAM_ON:
-		egpio |= EGPIO_H3600_OPT_NVRAM_ON;
-		break;
-	case IPAQ_EGPIO_OPT_ON:
-		egpio |= EGPIO_H3600_OPT_ON;
-		break;
-	case IPAQ_EGPIO_CARD_RESET:
-		egpio |= EGPIO_H3600_CARD_RESET;
-		break;
-	case IPAQ_EGPIO_OPT_RESET:
-		egpio |= EGPIO_H3600_OPT_RESET;
-		break;
-	case IPAQ_EGPIO_IR_ON:
-		egpio |= EGPIO_H3600_IR_ON;
-		break;
-	case IPAQ_EGPIO_IR_FSEL:
-		egpio |= EGPIO_H3600_IR_FSEL;
-		break;
-	case IPAQ_EGPIO_RS232_ON:
-		egpio |= EGPIO_H3600_RS232_ON;
-		break;
-	case IPAQ_EGPIO_VPP_ON:
-		egpio |= EGPIO_H3600_VPP_ON;
-		break;
-	}
+static struct irda_platform_data h3600_irda_data = {
+	.set_power	= h3600_irda_set_power,
+	.set_speed	= h3600_irda_set_speed,
+	.startup	= h3600_irda_startup,
+	.shutdown	= h3600_irda_shutdown,
+};
 
-	if (egpio) {
-		local_irq_save(flags);
-		if (setp)
-			h3600_egpio |= egpio;
-		else
-			h3600_egpio &= ~egpio;
-		H3600_EGPIO = h3600_egpio;
-		local_irq_restore(flags);
-	}
-}
+static struct gpio_default_state h3600_default_gpio[] = {
+	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
+	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
+	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
+};
 
-static void __init h3600_map_io(void)
+static void __init h3600_mach_init(void)
 {
-	h3xxx_map_io();
-
-	/* Initialize h3600-specific values here */
-
-	GPCR = 0x0fffffff;	 /* All outputs are set low by default */
-	GPDR = GPIO_H3600_COM_RTS  | GPIO_H3600_L3_CLOCK |
-	       GPIO_H3600_L3_MODE  | GPIO_H3600_L3_DATA  |
-	       GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
-	       GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
-	       GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9  | GPIO_LDD8;
-
-	H3600_EGPIO = h3600_egpio;	   /* Maintains across sleep? */
-	assign_h3600_egpio = h3600_control_egpio;
+	h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
+	h3xxx_mach_init();
+	sa11x0_register_irda(&h3600_irda_data);
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
@@ -425,8 +131,6 @@ MACHINE_START(H3600, "Compaq iPAQ H3600")
 	.map_io		= h3600_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
-	.init_machine	= h3xxx_mach_init,
+	.init_machine	= h3600_mach_init,
 MACHINE_END
 
-#endif /* CONFIG_SA1100_H3600 */
-
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
new file mode 100644
index 000000000000..b0784c974c2d
--- /dev/null
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -0,0 +1,313 @@
+/*
+ * Support for Compaq iPAQ H3100 and H3600 handheld computers (common code)
+ *
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mfd/htc-egpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/serial_sa1100.h>
+
+#include <mach/h3xxx.h>
+
+#include "generic.h"
+
+void h3xxx_init_gpio(struct gpio_default_state *s, size_t n)
+{
+	while (n--) {
+		const char *name = s->name;
+		int err;
+
+		if (!name)
+			name = "[init]";
+		err = gpio_request(s->gpio, name);
+		if (err) {
+			printk(KERN_ERR "gpio%u: unable to request: %d\n",
+				s->gpio, err);
+			continue;
+		}
+		if (s->mode >= 0) {
+			err = gpio_direction_output(s->gpio, s->mode);
+		} else {
+			err = gpio_direction_input(s->gpio);
+		}
+		if (err) {
+			printk(KERN_ERR "gpio%u: unable to set direction: %d\n",
+				s->gpio, err);
+			continue;
+		}
+		if (!s->name)
+			gpio_free(s->gpio);
+		s++;
+	}
+}
+
+
+/*
+ * H3xxx flash support
+ */
+static struct mtd_partition h3xxx_partitions[] = {
+	{
+		.name		= "H3XXX boot firmware",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name		= "H3XXX rootfs",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0x00040000,
+	}
+};
+
+static void h3xxx_set_vpp(int vpp)
+{
+	gpio_set_value(H3XXX_EGPIO_VPP_ON, vpp);
+}
+
+static int h3xxx_flash_init(void)
+{
+	int err = gpio_request(H3XXX_EGPIO_VPP_ON, "Flash Vpp");
+	if (err) {
+		pr_err("%s: can't request H3XXX_EGPIO_VPP_ON\n", __func__);
+		return err;
+	}
+
+	err = gpio_direction_output(H3XXX_EGPIO_VPP_ON, 0);
+	if (err)
+		gpio_free(H3XXX_EGPIO_VPP_ON);
+
+	return err;
+}
+
+static void h3xxx_flash_exit(void)
+{
+	gpio_free(H3XXX_EGPIO_VPP_ON);
+}
+
+static struct flash_platform_data h3xxx_flash_data = {
+	.map_name	= "cfi_probe",
+	.set_vpp	= h3xxx_set_vpp,
+	.init		= h3xxx_flash_init,
+	.exit		= h3xxx_flash_exit,
+	.parts		= h3xxx_partitions,
+	.nr_parts	= ARRAY_SIZE(h3xxx_partitions),
+};
+
+static struct resource h3xxx_flash_resource = {
+	.start		= SA1100_CS0_PHYS,
+	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+
+/*
+ * H3xxx uart support
+ */
+static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+	if (port->mapbase == _Ser3UTCR0) {
+		gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS));
+	}
+}
+
+static u_int h3xxx_uart_get_mctrl(struct uart_port *port)
+{
+	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
+
+	if (port->mapbase == _Ser3UTCR0) {
+		/*
+		 * DCD and CTS bits are inverted in GPLR by RS232 transceiver
+		 */
+		if (gpio_get_value(H3XXX_GPIO_COM_DCD))
+			ret &= ~TIOCM_CD;
+		if (gpio_get_value(H3XXX_GPIO_COM_CTS))
+			ret &= ~TIOCM_CTS;
+	}
+
+	return ret;
+}
+
+static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
+{
+	if (port->mapbase == _Ser3UTCR0) {
+		if (!gpio_request(H3XXX_EGPIO_RS232_ON, "RS232 transceiver")) {
+			gpio_direction_output(H3XXX_EGPIO_RS232_ON, !state);
+			gpio_free(H3XXX_EGPIO_RS232_ON);
+		} else {
+			pr_err("%s: can't request H3XXX_EGPIO_RS232_ON\n",
+				__func__);
+		}
+	}
+}
+
+/*
+ * Enable/Disable wake up events for this serial port.
+ * Obviously, we only support this on the normal COM port.
+ */
+static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable)
+{
+	int err = -EINVAL;
+
+	if (port->mapbase == _Ser3UTCR0) {
+		if (enable)
+			PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
+		else
+			PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
+		err = 0;
+	}
+	return err;
+}
+
+static struct sa1100_port_fns h3xxx_port_fns __initdata = {
+	.set_mctrl	= h3xxx_uart_set_mctrl,
+	.get_mctrl	= h3xxx_uart_get_mctrl,
+	.pm		= h3xxx_uart_pm,
+	.set_wake	= h3xxx_uart_set_wake,
+};
+
+/*
+ * EGPIO
+ */
+
+static struct resource egpio_resources[] = {
+	[0] = {
+		.start	= H3600_EGPIO_PHYS,
+		.end	= H3600_EGPIO_PHYS + 0x4 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+	[0] = {
+		.reg_start	= 0,
+		.gpio_base	= H3XXX_EGPIO_BASE,
+		.num_gpios	= 16,
+		.direction	= HTC_EGPIO_OUTPUT,
+		.initial_values	= 0x0080, /* H3XXX_EGPIO_RS232_ON */
+	},
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+	.reg_width	= 16,
+	.bus_width	= 16,
+	.chip		= egpio_chips,
+	.num_chips	= ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device h3xxx_egpio = {
+	.name		= "htc-egpio",
+	.id		= -1,
+	.resource	= egpio_resources,
+	.num_resources	= ARRAY_SIZE(egpio_resources),
+	.dev		= {
+		.platform_data = &egpio_info,
+	},
+};
+
+/*
+ * GPIO keys
+ */
+
+static struct gpio_keys_button h3xxx_button_table[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= H3XXX_GPIO_PWR_BUTTON,
+		.desc		= "Power Button",
+		.active_low	= 1,
+		.type		= EV_KEY,
+		.wakeup		= 1,
+	}, {
+		.code		= KEY_ENTER,
+		.gpio		= H3XXX_GPIO_ACTION_BUTTON,
+		.active_low	= 1,
+		.desc		= "Action button",
+		.type		= EV_KEY,
+		.wakeup		= 0,
+	},
+};
+
+static struct gpio_keys_platform_data h3xxx_keys_data = {
+	.buttons  = h3xxx_button_table,
+	.nbuttons = ARRAY_SIZE(h3xxx_button_table),
+};
+
+static struct platform_device h3xxx_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h3xxx_keys_data,
+	},
+};
+
+static struct platform_device *h3xxx_devices[] = {
+	&h3xxx_egpio,
+	&h3xxx_keys,
+};
+
+void __init h3xxx_mach_init(void)
+{
+	sa1100_register_uart_fns(&h3xxx_port_fns);
+	sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
+	platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices));
+}
+
+static struct map_desc h3600_io_desc[] __initdata = {
+	{	/* static memory bank 2  CS#2 */
+		.virtual	=  H3600_BANK_2_VIRT,
+		.pfn		= __phys_to_pfn(SA1100_CS2_PHYS),
+		.length		= 0x02800000,
+		.type		= MT_DEVICE
+	}, {	/* static memory bank 4  CS#4 */
+		.virtual	=  H3600_BANK_4_VIRT,
+		.pfn		= __phys_to_pfn(SA1100_CS4_PHYS),
+		.length		= 0x00800000,
+		.type		= MT_DEVICE
+	}, {	/* EGPIO 0		CS#5 */
+		.virtual	=  H3600_EGPIO_VIRT,
+		.pfn		= __phys_to_pfn(H3600_EGPIO_PHYS),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	}
+};
+
+/*
+ * Common map_io initialization
+ */
+
+void __init h3xxx_map_io(void)
+{
+	sa1100_map_io();
+	iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
+
+	sa1100_register_uart(0, 3); /* Common serial port */
+//	sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
+
+	/* Ensure those pins are outputs and driving low  */
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
+	/* Configure suspend conditions */
+	PGSR = 0;
+	PCFR = PCFR_OPDE;
+	PSDR = 0;
+
+	GPCR = 0x0fffffff;	/* All outputs are set low by default */
+	GPDR = 0;		/* Configure all GPIOs as input */
+}
+
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index e7056c0b562c..51568dfc8e97 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -187,7 +187,7 @@ static struct resource hackkit_flash_resource = {
 
 static void __init hackkit_init(void)
 {
-	sa11x0_set_flash_data(&hackkit_flash_data, &hackkit_flash_resource, 1);
+	sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
 }
 
 /**********************************************************************
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 9efb569cdb60..71a0b3fdcc8c 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -25,29 +25,39 @@
 #define COLLIE_GPIO_VPEN	(COLLIE_SCOOP_GPIO_BASE + 7)
 #define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
 
-#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+#define COLLIE_SCOOP_IO_DIR	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
 				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
-				COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
+				COLLIE_SCP_LB_VOL_CHG)
+#define COLLIE_SCOOP_IO_OUT	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
 
-/* GPIOs for which the generic definition doesn't say much */
+/* GPIOs for gpiolib  */
 
-#define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
-#define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
-#define COLLIE_GPIO_SDIO_INT		GPIO_GPIO (11)
-#define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
-#define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
-#define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
-#define COLLIE_GPIO_nMIC_ON		GPIO_GPIO (17)
-#define COLLIE_GPIO_nREMOCON_ON		GPIO_GPIO (18)
-#define COLLIE_GPIO_CO			GPIO_GPIO (20)
-#define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
-#define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
-#define COLLIE_GPIO_UCB1x00_IRQ		GPIO_GPIO (23)
-#define COLLIE_GPIO_WAKEUP		GPIO_GPIO (24)
-#define COLLIE_GPIO_GA_INT		GPIO_GPIO (25)
-#define COLLIE_GPIO_MAIN_BAT_LOW	GPIO_GPIO (26)
+#define COLLIE_GPIO_ON_KEY		(0)
+#define COLLIE_GPIO_AC_IN		(1)
+#define COLLIE_GPIO_SDIO_INT		(11)
+#define COLLIE_GPIO_CF_IRQ		(14)
+#define COLLIE_GPIO_nREMOCON_INT	(15)
+#define COLLIE_GPIO_UCB1x00_RESET	(16)
+#define COLLIE_GPIO_nMIC_ON		(17)
+#define COLLIE_GPIO_nREMOCON_ON		(18)
+#define COLLIE_GPIO_CO			(20)
+#define COLLIE_GPIO_MCP_CLK		(21)
+#define COLLIE_GPIO_CF_CD		(22)
+#define COLLIE_GPIO_UCB1x00_IRQ		(23)
+#define COLLIE_GPIO_WAKEUP		(24)
+#define COLLIE_GPIO_GA_INT		(25)
+#define COLLIE_GPIO_MAIN_BAT_LOW	(26)
 
+/* GPIO definitions for direct register access */
+
+#define _COLLIE_GPIO_ON_KEY		GPIO_GPIO(0)
+#define _COLLIE_GPIO_AC_IN		GPIO_GPIO(1)
+#define _COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO(15)
+#define _COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO(16)
+#define _COLLIE_GPIO_nMIC_ON		GPIO_GPIO(17)
+#define _COLLIE_GPIO_nREMOCON_ON	GPIO_GPIO(18)
+#define _COLLIE_GPIO_CO			GPIO_GPIO(20)
+#define _COLLIE_GPIO_WAKEUP		GPIO_GPIO(24)
 /* Interrupts */
 
 #define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
@@ -70,19 +80,20 @@
 #define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
 
 /* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
-#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0	/* GPIO0=Version                 */
-#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1	/* GPIO1=TBL_CHK                 */
-#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2	/* GPIO2=VPNE_ON                 */
-#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3	/* GPIO3=IR_ON                   */
-#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4	/* GPIO4=AMP_ON                  */
-#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5	/* GPIO5=Version                 */
-#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5	/* GPIO5=fs 8k LPF               */
-#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6	/* GPIO6=BUZZER BIAS             */
-#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7	/* GPIO7=MBAT_ON                 */
-#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8	/* GPIO8=BBAT_ON                 */
-#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9	/* GPIO9=TMP_ON                  */
-#define COLLIE_TC35143_GPIO_IN		( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
-#define COLLIE_TC35143_GPIO_OUT		( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
-					UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+#define COLLIE_TC35143_GPIO_BASE	(GPIO_MAX + 13)
+#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0
+#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1
+#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2
+#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3
+#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4
+#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5
+#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6
+#define COLLIE_GPIO_MBAT_ON     	(COLLIE_TC35143_GPIO_BASE + 7)
+#define COLLIE_GPIO_BBAT_ON     	(COLLIE_TC35143_GPIO_BASE + 8)
+#define COLLIE_GPIO_TMP_ON      	(COLLIE_TC35143_GPIO_BASE + 9)
+#define COLLIE_TC35143_GPIO_IN		(UCB_IO_0 | UCB_IO_2 | UCB_IO_5)
+#define COLLIE_TC35143_GPIO_OUT		(UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \
+						| UCB_IO_6)
 
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
index 582a0c92da53..7befc104e9a9 100644
--- a/arch/arm/mach-sa1100/include/mach/gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -49,20 +49,9 @@ static inline void gpio_set_value(unsigned gpio, int value)
 
 #define gpio_cansleep	__gpio_cansleep
 
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
-	if (gpio < 11)
-		return IRQ_GPIO0 + gpio;
-	else
-		return IRQ_GPIO11 - 11 + gpio;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
-	if (irq < IRQ_GPIO11_27)
-		return irq - IRQ_GPIO0;
-	else
-		return irq - IRQ_GPIO11 + 11;
-}
+#define gpio_to_irq(gpio)	((gpio < 11) ? (IRQ_GPIO0 + gpio) : \
+					(IRQ_GPIO11 - 11 + gpio))
+#define irq_to_gpio(irq)	((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \
+					(irq - IRQ_GPIO11 + 11))
 
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
deleted file mode 100644
index 2827faa47421..000000000000
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??	Andrew Christian   Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_H_
-#define _INCLUDE_H3600_H_
-
-typedef int __bitwise pm_request_t;
-
-#define PM_SUSPEND	((__force pm_request_t) 1)	/* enter D1-D3 */
-#define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
-
-/* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
-
-/* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
-
-/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT	0xf0000000
-#define H3600_BANK_2_VIRT	0xf1000000
-#define H3600_BANK_4_VIRT	0xf3800000
-
-/*
-   Machine-independent GPIO definitions
-   --- these are common across all current iPAQ platforms
-*/
-
-#define GPIO_H3600_NPOWER_BUTTON	GPIO_GPIO (0)	/* Also known as the "off button"  */
-
-#define GPIO_H3600_PCMCIA_CD1		GPIO_GPIO (10)
-#define GPIO_H3600_PCMCIA_IRQ1		GPIO_GPIO (11)
-
-/* UDA1341 L3 Interface */
-#define GPIO_H3600_L3_DATA		GPIO_GPIO (14)
-#define GPIO_H3600_L3_MODE		GPIO_GPIO (15)
-#define GPIO_H3600_L3_CLOCK		GPIO_GPIO (16)
-
-#define GPIO_H3600_PCMCIA_CD0		GPIO_GPIO (17)
-#define GPIO_H3600_SYS_CLK		GPIO_GPIO (19)
-#define GPIO_H3600_PCMCIA_IRQ0		GPIO_GPIO (21)
-
-#define GPIO_H3600_COM_DCD		GPIO_GPIO (23)
-#define GPIO_H3600_OPT_IRQ		GPIO_GPIO (24)
-#define GPIO_H3600_COM_CTS		GPIO_GPIO (25)
-#define GPIO_H3600_COM_RTS		GPIO_GPIO (26)
-
-#define IRQ_GPIO_H3600_NPOWER_BUTTON	IRQ_GPIO0
-#define IRQ_GPIO_H3600_PCMCIA_CD1	IRQ_GPIO10
-#define IRQ_GPIO_H3600_PCMCIA_IRQ1	IRQ_GPIO11
-#define IRQ_GPIO_H3600_PCMCIA_CD0	IRQ_GPIO17
-#define IRQ_GPIO_H3600_PCMCIA_IRQ0	IRQ_GPIO21
-#define IRQ_GPIO_H3600_COM_DCD		IRQ_GPIO23
-#define IRQ_GPIO_H3600_OPT_IRQ		IRQ_GPIO24
-#define IRQ_GPIO_H3600_COM_CTS		IRQ_GPIO25
-
-
-#ifndef __ASSEMBLY__
-
-enum ipaq_egpio_type {
-	IPAQ_EGPIO_LCD_POWER,	  /* Power to the LCD panel */
-	IPAQ_EGPIO_CODEC_NRESET,  /* Clear to reset the audio codec (remember to return high) */
-	IPAQ_EGPIO_AUDIO_ON,	  /* Audio power */
-	IPAQ_EGPIO_QMUTE,	  /* Audio muting */
-	IPAQ_EGPIO_OPT_NVRAM_ON,  /* Non-volatile RAM on extension sleeves (SPI interface) */
-	IPAQ_EGPIO_OPT_ON,	  /* Power to extension sleeves */
-	IPAQ_EGPIO_CARD_RESET,	  /* Reset PCMCIA cards on extension sleeve (???) */
-	IPAQ_EGPIO_OPT_RESET,	  /* Reset option pack (???) */
-	IPAQ_EGPIO_IR_ON,	  /* IR sensor/emitter power */
-	IPAQ_EGPIO_IR_FSEL,	  /* IR speed selection 1->fast, 0->slow */
-	IPAQ_EGPIO_RS232_ON,	  /* Maxim RS232 chip power */
-	IPAQ_EGPIO_VPP_ON,	  /* Turn on power to flash programming */
-	IPAQ_EGPIO_LCD_ENABLE,	  /* Enable/disable LCD controller */
-};
-
-extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-
-#endif /* ASSEMBLY */
-
-#endif /* _INCLUDE_H3600_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
deleted file mode 100644
index a36ca76d018b..000000000000
--- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??   Andrew Christian   Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_GPIO_H_
-#define _INCLUDE_H3600_GPIO_H_
-
-/*
- * GPIO lines that are common across ALL iPAQ models are in "h3600.h"
- * This file contains machine-specific definitions
- */
-
-#define GPIO_H3600_SUSPEND              GPIO_GPIO (0)
-/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */
-#define GPIO_H3100_BT_ON		GPIO_GPIO (2)
-#define GPIO_H3100_GPIO3		GPIO_GPIO (3)
-#define GPIO_H3100_QMUTE		GPIO_GPIO (4)
-#define GPIO_H3100_LCD_3V_ON		GPIO_GPIO (5)
-#define GPIO_H3100_AUD_ON		GPIO_GPIO (6)
-#define GPIO_H3100_AUD_PWR_ON		GPIO_GPIO (7)
-#define GPIO_H3100_IR_ON		GPIO_GPIO (8)
-#define GPIO_H3100_IR_FSEL		GPIO_GPIO (9)
-
-/* for H3600, audio sample rate clock generator */
-#define GPIO_H3600_CLK_SET0		GPIO_GPIO (12)
-#define GPIO_H3600_CLK_SET1		GPIO_GPIO (13)
-
-#define GPIO_H3600_ACTION_BUTTON	GPIO_GPIO (18)
-#define GPIO_H3600_SOFT_RESET           GPIO_GPIO (20)   /* Also known as BATT_FAULT */
-#define GPIO_H3600_OPT_LOCK		GPIO_GPIO (22)
-#define GPIO_H3600_OPT_DET		GPIO_GPIO (27)
-
-/****************************************************/
-
-#define IRQ_GPIO_H3600_ACTION_BUTTON    IRQ_GPIO18
-#define IRQ_GPIO_H3600_OPT_DET		IRQ_GPIO27
-
-/* H3100 / 3600 EGPIO pins */
-#define EGPIO_H3600_VPP_ON		(1 << 0)
-#define EGPIO_H3600_CARD_RESET		(1 << 1)   /* reset the attached pcmcia/compactflash card.  active high. */
-#define EGPIO_H3600_OPT_RESET		(1 << 2)   /* reset the attached option pack.  active high. */
-#define EGPIO_H3600_CODEC_NRESET	(1 << 3)   /* reset the onboard UDA1341.  active low. */
-#define EGPIO_H3600_OPT_NVRAM_ON	(1 << 4)   /* apply power to optionpack nvram, active high. */
-#define EGPIO_H3600_OPT_ON		(1 << 5)   /* full power to option pack.  active high. */
-#define EGPIO_H3600_LCD_ON		(1 << 6)   /* enable 3.3V to LCD.  active high. */
-#define EGPIO_H3600_RS232_ON		(1 << 7)   /* UART3 transceiver force on.  Active high. */
-
-/* H3600 only EGPIO pins */
-#define EGPIO_H3600_LCD_PCI		(1 << 8)   /* LCD control IC enable.  active high. */
-#define EGPIO_H3600_IR_ON		(1 << 9)   /* apply power to IR module.  active high. */
-#define EGPIO_H3600_AUD_AMP_ON		(1 << 10)  /* apply power to audio power amp.  active high. */
-#define EGPIO_H3600_AUD_PWR_ON		(1 << 11)  /* apply power to reset of audio circuit.  active high. */
-#define EGPIO_H3600_QMUTE		(1 << 12)  /* mute control for onboard UDA1341.  active high. */
-#define EGPIO_H3600_IR_FSEL		(1 << 13)  /* IR speed select: 1->fast, 0->slow */
-#define EGPIO_H3600_LCD_5V_ON		(1 << 14)  /* enable 5V to LCD. active high. */
-#define EGPIO_H3600_LVDD_ON		(1 << 15)  /* enable 9V and -6.5V to LCD. */
-
-
-#endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h
new file mode 100644
index 000000000000..7d9df16f04a2
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h
@@ -0,0 +1,94 @@
+/*
+ * Definitions for Compaq iPAQ H3100 and H3600 handheld computers
+ *
+ * (c) 2000 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_H3XXX_H_
+#define _INCLUDE_H3XXX_H_
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT	0xf0000000
+#define H3600_BANK_2_VIRT	0xf1000000
+#define H3600_BANK_4_VIRT	0xf3800000
+
+/*
+ * gpiolib numbers for all iPAQs
+ */
+#define H3XXX_GPIO_PWR_BUTTON		0
+#define H3XXX_GPIO_PCMCIA_CD1		10
+#define H3XXX_GPIO_PCMCIA_IRQ1		11
+#define H3XXX_GPIO_PCMCIA_CD0		17
+#define H3XXX_GPIO_ACTION_BUTTON	18
+#define H3XXX_GPIO_SYS_CLK		19
+#define H3XXX_GPIO_PCMCIA_IRQ0		21
+#define H3XXX_GPIO_COM_DCD		23
+#define H3XXX_GPIO_OPTION		24
+#define H3XXX_GPIO_COM_CTS		25
+#define H3XXX_GPIO_COM_RTS		26
+
+/* machine-specific gpios */
+
+#define H3100_GPIO_BT_ON		2
+#define H3100_GPIO_QMUTE		4
+#define H3100_GPIO_LCD_3V_ON		5
+#define H3100_GPIO_AUD_ON		6
+#define H3100_GPIO_AUD_PWR_ON		7
+#define H3100_GPIO_IR_ON		8
+#define H3100_GPIO_IR_FSEL		9
+
+#define H3600_GPIO_CLK_SET0		12	/* audio sample rate clock generator */
+#define H3600_GPIO_CLK_SET1		13
+#define H3600_GPIO_SOFT_RESET		20	/* also known as BATT_FAULT */
+#define H3600_GPIO_OPT_LOCK		22
+#define H3600_GPIO_OPT_DET		27
+
+
+/* H3100 / 3600 EGPIO pins */
+#define H3XXX_EGPIO_BASE		(GPIO_MAX + 1)
+
+#define H3XXX_EGPIO_VPP_ON		(H3XXX_EGPIO_BASE + 0)
+#define H3XXX_EGPIO_CARD_RESET		(H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card.  active high. */
+#define H3XXX_EGPIO_OPT_RESET		(H3XXX_EGPIO_BASE + 2) /* reset the attached option pack.  active high. */
+#define H3XXX_EGPIO_CODEC_NRESET	(H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341.  active low. */
+#define H3XXX_EGPIO_OPT_NVRAM_ON	(H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */
+#define H3XXX_EGPIO_OPT_ON		(H3XXX_EGPIO_BASE + 5) /* full power to option pack.  active high. */
+#define H3XXX_EGPIO_LCD_ON		(H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD.  active high. */
+#define H3XXX_EGPIO_RS232_ON		(H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on.  Active high. */
+
+/* H3600 only EGPIO pins */
+#define H3600_EGPIO_LCD_PCI		(H3XXX_EGPIO_BASE + 8) /* LCD control IC enable.  active high. */
+#define H3600_EGPIO_IR_ON		(H3XXX_EGPIO_BASE + 9) /* apply power to IR module.  active high. */
+#define H3600_EGPIO_AUD_AMP_ON		(H3XXX_EGPIO_BASE + 10) /* apply power to audio power amp.  active high. */
+#define H3600_EGPIO_AUD_PWR_ON		(H3XXX_EGPIO_BASE + 11) /* apply power to reset of audio circuit.  active high. */
+#define H3600_EGPIO_QMUTE		(H3XXX_EGPIO_BASE + 12) /* mute control for onboard UDA1341.  active high. */
+#define H3600_EGPIO_IR_FSEL		(H3XXX_EGPIO_BASE + 13) /* IR speed select: 1->fast, 0->slow */
+#define H3600_EGPIO_LCD_5V_ON		(H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */
+#define H3600_EGPIO_LVDD_ON		(H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */
+
+struct gpio_default_state {
+	int gpio;
+	int mode;
+	const char *name;
+};
+
+#define GPIO_MODE_IN	-1
+#define GPIO_MODE_OUT0	0
+#define GPIO_MODE_OUT1	1
+
+void h3xxx_init_gpio(struct gpio_default_state *s, size_t n);
+void __init h3xxx_map_io(void);
+void __init h3xxx_mach_init(void);
+
+#endif /* _INCLUDE_H3XXX_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index fb8b09a57ad7..ed1a331508a7 100644
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -16,6 +16,7 @@ struct mcp_plat_data {
 	u32 mccr0;
 	u32 mccr1;
 	unsigned int sclk_rate;
+	int gpio_base;
 };
 
 #endif
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index fd776bb666cd..13ebd2d99bfd 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -354,7 +354,7 @@ static struct resource jornada720_flash_resource = {
 
 static void __init jornada720_mach_init(void)
 {
-	sa11x0_set_flash_data(&jornada720_flash_data, &jornada720_flash_resource, 1);
+	sa11x0_register_mtd(&jornada720_flash_data, &jornada720_flash_resource, 1);
 }
 
 MACHINE_START(JORNADA720, "HP Jornada 720")
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 1f940df0e5af..68069d6dc07a 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -28,7 +28,7 @@ static struct mcp_plat_data lart_mcp_data = {
 
 static void __init lart_init(void)
 {
-	sa11x0_set_mcp_data(&lart_mcp_data);
+	sa11x0_register_mcp(&lart_mcp_data);
 }
 
 static struct map_desc lart_io_desc[] __initdata = {
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index e1458bc1868e..1ccd6018d3a3 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -109,7 +109,7 @@ static struct flash_platform_data pleb_flash_data = {
 
 static void __init pleb_init(void)
 {
-	sa11x0_set_flash_data(&pleb_flash_data, pleb_flash_resources,
+	sa11x0_register_mtd(&pleb_flash_data, pleb_flash_resources,
 			      ARRAY_SIZE(pleb_flash_resources));
 
 
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index ddd917d1083d..85e82bb73d7e 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -59,8 +59,8 @@ static struct mcp_plat_data shannon_mcp_data = {
 
 static void __init shannon_init(void)
 {
-	sa11x0_set_flash_data(&shannon_flash_data, &shannon_flash_resource, 1);
-	sa11x0_set_mcp_data(&shannon_mcp_data);
+	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
+	sa11x0_register_mcp(&shannon_mcp_data);
 }
 
 static void __init shannon_map_io(void)
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 3c74534f7fee..49cfd64663ac 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -166,9 +166,9 @@ static void __init simpad_map_io(void)
 	PCFR = 0;
 	PSDR = 0;
 
-	sa11x0_set_flash_data(&simpad_flash_data, simpad_flash_resources,
+	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
 			      ARRAY_SIZE(simpad_flash_resources));
-	sa11x0_set_mcp_data(&simpad_mcp_data);
+	sa11x0_register_mcp(&simpad_mcp_data);
 }
 
 static void simpad_power_off(void)
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 885b5c027c1e..fab46fe9a71f 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_MMC)                 += mmc.o
 obj-$(CONFIG_SPI_PL022)           += spi.o
 obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
 obj-$(CONFIG_I2C_STU300)          += i2c.o
+obj-$(CONFIG_REGULATOR_AB3100)    += regulator.o
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index 10be1f888b27..c73ed06b6065 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -9,13 +9,257 @@
  */
 #include <linux/kernel.h>
 #include <linux/i2c.h>
+#include <linux/mfd/ab3100.h>
+#include <linux/regulator/machine.h>
+#include <linux/amba/bus.h>
 #include <mach/irqs.h>
 
+/*
+ * Initial settings of ab3100 registers.
+ * Common for below LDO regulator settings are that
+ * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
+ * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
+ */
+
+/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
+#define LDO_A_SETTING		0x16
+/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_C_SETTING		0x10
+/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
+#define LDO_D_SETTING		0x10
+/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_E_SETTING		0x10
+/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
+#define LDO_E_SLEEP_SETTING	0x00
+/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_F_SETTING		0xD0
+/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_G_SETTING		0x00
+/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
+#define LDO_H_SETTING		0x18
+/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_K_SETTING		0x00
+/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
+#define LDO_EXT_SETTING		0x00
+/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
+#define BUCK_SETTING	0x7D
+/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
+#define BUCK_SLEEP_SETTING	0xAC
+
+static struct regulator_consumer_supply supply_ldo_c[] = {
+	{
+		.dev_name = "ab3100-codec",
+		.supply = "vaudio", /* Powers the codec */
+	},
+};
+
+/*
+ * This one needs to be a supply so we can turn it off
+ * in order to shut down the system.
+ */
+static struct regulator_consumer_supply supply_ldo_d[] = {
+	{
+		.dev = NULL,
+		.supply = "vana15", /* Powers the SoC (CPU etc) */
+	},
+};
+
+static struct regulator_consumer_supply supply_ldo_g[] = {
+	{
+		.dev_name = "mmci",
+		.supply = "vmmc", /* Powers MMC/SD card */
+	},
+};
+
+static struct regulator_consumer_supply supply_ldo_h[] = {
+	{
+		.dev_name = "xgam_pdi",
+		.supply = "vdisp", /* Powers camera, display etc */
+	},
+};
+
+static struct regulator_consumer_supply supply_ldo_k[] = {
+	{
+		.dev_name = "irda",
+		.supply = "vir", /* Power IrDA */
+	},
+};
+
+/*
+ * This is a placeholder for whoever wish to use the
+ * external power.
+ */
+static struct regulator_consumer_supply supply_ldo_ext[] = {
+	{
+		.dev = NULL,
+		.supply = "vext", /* External power */
+	},
+};
+
+/* Preset (hardware defined) voltages for these regulators */
+#define LDO_A_VOLTAGE 2750000
+#define LDO_C_VOLTAGE 2650000
+#define LDO_D_VOLTAGE 2650000
+
+static struct ab3100_platform_data ab3100_plf_data = {
+	.reg_constraints = {
+		/* LDO A routing and constraints */
+		{
+			.constraints = {
+				.name = "vrad",
+				.min_uV = LDO_A_VOLTAGE,
+				.max_uV = LDO_A_VOLTAGE,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.always_on = 1,
+				.boot_on = 1,
+			},
+		},
+		/* LDO C routing and constraints */
+		{
+			.constraints = {
+				.min_uV = LDO_C_VOLTAGE,
+				.max_uV = LDO_C_VOLTAGE,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_c),
+			.consumer_supplies = supply_ldo_c,
+		},
+		/* LDO D routing and constraints */
+		{
+			.constraints = {
+				.min_uV = LDO_D_VOLTAGE,
+				.max_uV = LDO_D_VOLTAGE,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+				/*
+				 * Actually this is boot_on but we need
+				 * to reference count it externally to
+				 * be able to shut down the system.
+				 */
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_d),
+			.consumer_supplies = supply_ldo_d,
+		},
+		/* LDO E routing and constraints */
+		{
+			.constraints = {
+				.name = "vio",
+				.min_uV = 1800000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+				.always_on = 1,
+				.boot_on = 1,
+			},
+		},
+		/* LDO F routing and constraints */
+		{
+			.constraints = {
+				.name = "vana25",
+				.min_uV = 2500000,
+				.max_uV = 2500000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+				.always_on = 1,
+				.boot_on = 1,
+			},
+		},
+		/* LDO G routing and constraints */
+		{
+			.constraints = {
+				.min_uV = 1500000,
+				.max_uV = 2850000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_g),
+			.consumer_supplies = supply_ldo_g,
+		},
+		/* LDO H routing and constraints */
+		{
+			.constraints = {
+				.min_uV = 1200000,
+				.max_uV = 2750000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_h),
+			.consumer_supplies = supply_ldo_h,
+		},
+		/* LDO K routing and constraints */
+		{
+			.constraints = {
+				.min_uV = 1800000,
+				.max_uV = 2750000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_k),
+			.consumer_supplies = supply_ldo_k,
+		},
+		/* External regulator interface. No fixed voltage specified.
+		 * If we knew the voltage of the external regulator and it
+		 * was connected on the board, we could add the (fixed)
+		 * voltage for it here.
+		 */
+		{
+			.constraints = {
+				.min_uV = 0,
+				.max_uV = 0,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_STATUS,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext),
+			.consumer_supplies = supply_ldo_ext,
+		},
+		/* Buck converter routing and constraints */
+		{
+			.constraints = {
+				.name = "vcore",
+				.min_uV = 1200000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+				.always_on = 1,
+				.boot_on = 1,
+			},
+		},
+	},
+	.reg_initvals = {
+		LDO_A_SETTING,
+		LDO_C_SETTING,
+		LDO_E_SETTING,
+		LDO_E_SLEEP_SETTING,
+		LDO_F_SETTING,
+		LDO_G_SETTING,
+		LDO_H_SETTING,
+		LDO_K_SETTING,
+		LDO_EXT_SETTING,
+		BUCK_SETTING,
+		BUCK_SLEEP_SETTING,
+		LDO_D_SETTING,
+	},
+};
+
 static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
 	{
 		.type = "ab3100",
 		.addr = 0x48,
 		.irq = IRQ_U300_IRQ0_EXT,
+		.platform_data = &ab3100_plf_data,
 	},
 };
 
@@ -38,6 +282,11 @@ void __init u300_i2c_register_board_devices(void)
 {
 	i2c_register_board_info(0, bus0_i2c_board_info,
 				ARRAY_SIZE(bus0_i2c_board_info));
+	/*
+	 * This makes the core shut down all unused regulators
+	 * after all the initcalls have completed.
+	 */
+	regulator_has_full_constraints();
 	i2c_register_board_info(1, bus1_i2c_board_info,
 				ARRAY_SIZE(bus1_i2c_board_info));
 }
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
index 88333dfb19fc..56721a0cd2af 100644
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -6,7 +6,7 @@
  * Copyright (C) 2006-2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * Basic register address definitions in physical memory and
- * some block defintions for core devices like the timer.
+ * some block definitions for core devices like the timer.
  * Author: Linus Walleij <linus.walleij@stericsson.com>
  */
 
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 7b6b016786bb..109f5a6e71c7 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -40,64 +40,6 @@ static unsigned int mmc_status(struct device *dev)
 	return mmci_card->mmc_inserted;
 }
 
-/*
- * Here follows a large chunk of code which will only be enabled if you
- * have both the AB3100 chip mounted and the MMC subsystem activated.
- */
-
-static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage)
-{
-	int v;
-
-	/*
-	 * MMC Spec:
-	 * bit 7:	1.70 - 1.95V
-	 * bit 8 - 14:	2.0 - 2.6V
-	 * bit 15 - 23:	2.7 - 3.6V
-	 *
-	 * ab3100 voltages:
-	 * 000 - 2.85V
-	 * 001 - 2.75V
-	 * 010 - 1.8V
-	 * 011 - 1.5V
-	 */
-	switch (voltage) {
-	case 8:
-		v = 3;
-		break;
-	case 9:
-	case 10:
-	case 11:
-	case 12:
-	case 13:
-	case 14:
-	case 15:
-		v = 1;
-		break;
-	case 16:
-		v = 1;
-		break;
-	case 17:
-	case 18:
-	case 19:
-	case 20:
-	case 21:
-	case 22:
-	case 23:
-	case 24:
-		v = 0;
-		break;
-	default:
-		v = 0;
-		break;
-	}
-
-	/* PL180 voltage register bits */
-	return v << 2;
-}
-
-
-
 static int mmci_callback(void *data)
 {
 	struct mmci_card_event *mmci_card = data;
@@ -154,9 +96,11 @@ int __devinit mmc_init(struct amba_device *adev)
 	if (!mmci_card)
 		return -ENOMEM;
 
+	/*
+	 * Do not set ocr_mask or voltage translation function,
+	 * we have a regulator we can control instead.
+	 */
 	/* Nominally 2.85V on our platform */
-	mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
-	mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
 	mmci_card->mmc0_plat_data.status = mmc_status;
 	mmci_card->mmc0_plat_data.gpio_wp = -1;
 	mmci_card->mmc0_plat_data.gpio_cd = -1;
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
new file mode 100644
index 000000000000..9c53f01c62eb
--- /dev/null
+++ b/arch/arm/mach-u300/regulator.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-u300/regulator.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Handle board-bound regulators and board power not related
+ * to any devices.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+/* Those are just for writing in syscon */
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+/*
+ * Regulators that power the board and chip and which are
+ * not copuled to specific drivers are hogged in these
+ * instances.
+ */
+static struct regulator *main_power_15;
+
+/*
+ * This function is used from pm.h to shut down the system by
+ * resetting all regulators in turn and then disable regulator
+ * LDO D (main power).
+ */
+void u300_pm_poweroff(void)
+{
+	sigset_t old, all;
+
+	sigfillset(&all);
+	if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+		/* Disable LDO D to shut down the system */
+		if (main_power_15)
+			regulator_disable(main_power_15);
+		else
+			pr_err("regulator not available to shut down system\n");
+		(void) sigprocmask(SIG_SETMASK, &old, NULL);
+	}
+	return;
+}
+
+/*
+ * Hog the regulators needed to power up the board.
+ */
+static int __init u300_init_boardpower(void)
+{
+	int err;
+	u32 val;
+
+	pr_info("U300: setting up board power\n");
+	main_power_15 = regulator_get(NULL, "vana15");
+	if (IS_ERR(main_power_15)) {
+		pr_err("could not get vana15");
+		return PTR_ERR(main_power_15);
+	}
+	err = regulator_enable(main_power_15);
+	if (err) {
+		pr_err("could not enable vana15\n");
+		return err;
+	}
+
+	/*
+	 * On U300 a special system controller register pulls up the DC
+	 * until the vana15 (LDO D) regulator comes up. At this point, all
+	 * regulators are set and we do not need power control via
+	 * DC ON anymore. This function will likely be moved whenever
+	 * the rest of the U300 power management is implemented.
+	 */
+	pr_info("U300: disable system controller pull-up\n");
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+	val &= ~U300_SYSCON_PMCR_DCON_ENABLE;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+
+	/* Register globally exported PM poweroff hook */
+	pm_power_off = u300_pm_poweroff;
+
+	return 0;
+}
+
+/*
+ * So at module init time we hog the regulator!
+ */
+module_init(u300_init_boardpower);
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
new file mode 100644
index 000000000000..03625d744857
--- /dev/null
+++ b/arch/arm/mach-ux500/Kconfig
@@ -0,0 +1,15 @@
+menu "ST-Ericsson platform type"
+	depends on ARCH_U8500
+
+comment "ST-Ericsson Multicore Mobile Platforms"
+
+config MACH_U8500_MOP
+	bool "U8500 Early Development platform"
+	default y
+	select ARM_GIC
+	select HAS_MTU
+	help
+	  Include support for mop500 development platform
+	  based on U8500 architecture. The platform is based
+	  on early drop silicon version of 8500.
+endmenu
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
new file mode 100644
index 000000000000..95e6e24c0042
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel, U8500 machine.
+#
+
+obj-y				:= clock.o
+obj-$(CONFIG_ARCH_U8500)	+= cpu-u8500.o
+obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o localtimer.o
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
new file mode 100644
index 000000000000..c7e75acfe6c9
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
new file mode 100644
index 000000000000..aa5afbcc90f9
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/spi/spi.h>
+
+#include <asm/localtimer.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/mtu.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+/* These are active devices on this board */
+static struct amba_device uart0_device = {
+	.dev = { .init_name = "uart0" },
+	__MEM_4K_RESOURCE(U8500_UART0_BASE),
+	.irq = {IRQ_UART0, NO_IRQ},
+};
+
+static struct amba_device uart1_device = {
+	.dev = { .init_name = "uart1" },
+	__MEM_4K_RESOURCE(U8500_UART1_BASE),
+	.irq = {IRQ_UART1, NO_IRQ},
+};
+
+static struct amba_device uart2_device = {
+	.dev = { .init_name = "uart2" },
+	__MEM_4K_RESOURCE(U8500_UART2_BASE),
+	.irq = {IRQ_UART2, NO_IRQ},
+};
+
+static void ab4500_spi_cs_control(u32 command)
+{
+	/* set the FRM signal, which is CS  - TODO */
+}
+
+struct pl022_config_chip ab4500_chip_info = {
+	.lbm = LOOPBACK_DISABLED,
+	.com_mode = INTERRUPT_TRANSFER,
+	.iface = SSP_INTERFACE_MOTOROLA_SPI,
+	/* we can act as master only */
+	.hierarchy = SSP_MASTER,
+	.slave_tx_disable = 0,
+	.endian_rx = SSP_RX_MSB,
+	.endian_tx = SSP_TX_MSB,
+	.data_size = SSP_DATA_BITS_24,
+	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+	.clk_phase = SSP_CLK_SECOND_EDGE,
+	.clk_pol = SSP_CLK_POL_IDLE_HIGH,
+	.cs_control = ab4500_spi_cs_control,
+};
+
+static struct spi_board_info u8500_spi_devices[] = {
+	{
+		.modalias = "ab4500",
+		.controller_data = &ab4500_chip_info,
+		.max_speed_hz = 12000000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.mode = SPI_MODE_0,
+		.irq = IRQ_AB4500,
+	},
+};
+
+static struct pl022_ssp_controller ssp0_platform_data = {
+	.bus_id = 0,
+	/* pl022 not yet supports dma */
+	.enable_dma = 0,
+	/* on this platform, gpio 31,142,144,214 &
+	 * 224 are connected as chip selects
+	 */
+	.num_chipselect = 5,
+};
+
+static struct amba_device pl022_device = {
+	.dev = {
+		.coherent_dma_mask = ~0,
+		.init_name = "pl022",
+		.platform_data = &ssp0_platform_data,
+	},
+	.res = {
+		.start = U8500_SSP0_BASE,
+		.end   = U8500_SSP0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_SSP0, NO_IRQ },
+	/* ST-Ericsson modified id */
+	.periphid = SSP_PER_ID,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&pl022_device,
+};
+
+static void __init u8500_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+	/* Setup the local timer base */
+	twd_base = __io_address(U8500_TWD_BASE);
+#endif
+	/* Setup the MTU base */
+	mtu_base = __io_address(U8500_MTU0_BASE);
+
+	nmdk_timer_init();
+}
+
+static struct sys_timer u8500_timer = {
+	.init	= u8500_timer_init,
+};
+
+static void __init u8500_init_machine(void)
+{
+	int i;
+
+	/* Register the active AMBA devices on this board */
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+
+	spi_register_board_info(u8500_spi_devices,
+			ARRAY_SIZE(u8500_spi_devices));
+
+	u8500_init_devices();
+}
+
+MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
+	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
+	.phys_io	= U8500_UART2_BASE,
+	.io_pg_offst	= (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x100,
+	.map_io		= u8500_map_io,
+	.init_irq	= u8500_init_irq,
+	/* we re-use nomadik timer here */
+	.timer		= &u8500_timer,
+	.init_machine	= u8500_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
new file mode 100644
index 000000000000..20b6ebb6783a
--- /dev/null
+++ b/arch/arm/mach-ux500/clock.c
@@ -0,0 +1,95 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ * 	heavily based on realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <asm/clkdev.h>
+
+/* currently the clk structure
+ * just supports rate. This would
+ * be extended as and when new devices are
+ * added - TODO
+ */
+struct clk {
+	unsigned long		rate;
+};
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	/*TODO*/
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/* ssp clock */
+static struct clk ssp_clk = {
+	.rate = 48000000,
+};
+
+/* fixed clock */
+static struct clk f38_clk = {
+	.rate = 38400000,
+};
+
+static struct clk_lookup lookups[] = {
+	{
+		/* UART0 */
+		.dev_id		= "uart0",
+		.clk		= &f38_clk,
+	}, {	/* UART1 */
+		.dev_id		= "uart1",
+		.clk		= &f38_clk,
+	}, {	/* UART2 */
+		.dev_id		= "uart2",
+		.clk		= &f38_clk,
+	}, {	/* SSP */
+		.dev_id		= "pl022",
+		.clk		= &ssp_clk,
+	}
+};
+
+static int __init clk_init(void)
+{
+	int i;
+
+	/* register the clock lookups */
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+	return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c
new file mode 100644
index 000000000000..5f05e5850f71
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu-u8500.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
+	/* yet to be added, add i2c0, gpio.. */
+};
+
+#define __IO_DEV_DESC(x, sz)	{		\
+	.virtual	= IO_ADDRESS(x),	\
+	.pfn		= __phys_to_pfn(x),	\
+	.length		= sz,			\
+	.type		= MT_DEVICE,		\
+}
+
+/* minimum static i/o mapping required to boot U8500 platforms */
+static struct map_desc u8500_io_desc[] __initdata = {
+	__IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
+};
+
+void __init u8500_map_io(void)
+{
+	iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+}
+
+void __init u8500_init_irq(void)
+{
+	gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+}
+
+/*
+ * This function is called from the board init
+ */
+void __init u8500_init_devices(void)
+{
+	/* Register the platform devices */
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+	return ;
+}
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
new file mode 100644
index 000000000000..a6be2cdf2b2f
--- /dev/null
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -0,0 +1,38 @@
+/*
+ *  Copyright (c) 2009 ST-Ericsson
+ *	This file is based  ARM Realview platform
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * U8500 specific entry point for secondary CPUs.
+ */
+ENTRY(u8500_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+	dsb
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+1:	.long	.
+	.long	pen_release
diff --git a/arch/arm/mach-ux500/include/mach/clkdev.h b/arch/arm/mach-ux500/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
new file mode 100644
index 000000000000..8f21b6a95dce
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -0,0 +1,19 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1			@MMU enabled?
+	moveq	\rx, #0x80000000	@MMU off, Physical address
+	movne	\rx, #0xF0000000	@MMU on, Virtual address
+	orr	\rx, \rx, #0x7000
+	.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
new file mode 100644
index 000000000000..eece3301fef7
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -0,0 +1,89 @@
+/*
+ * Low-level IRQ helper macros for U8500 platforms
+ *
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is a copy of ARM Realview platform.
+ *	-just satisfied checkpatch script.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr     \base, =IO_ADDRESS(U8500_GIC_CPU_BASE)
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an
+		 * interrupt if it's between 30 and 1020. The test_for_ipi
+		 * routine below will pick up on IPIs.
+		 *
+		 * A simple read from the controller will tell us the number
+		 * of the highest priority enabled interrupt. We then just
+		 * need to check whether it is in the valid range for an
+		 * IRQ (30-1020 inclusive).
+		 */
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		/* bits 12-10 = src CPU, 9-0 = int # */
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+
+		ldr	\tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc	\irqnr, \irqnr
+		cmpne	\irqnr, \tmp
+		cmpcs	\irqnr, \irqnr
+
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ
+		 * acknowledge register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of
+		 * interrupt on the controller, since this requires the
+		 * original irqstat value which we won't easily be able
+		 * to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base
+		 * are preserved..
+		 */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
new file mode 100644
index 000000000000..6da650202dc7
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * U8500 hardware definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/* macros to get at IO space when running virtually
+ * We dont map all the peripherals, let ioremap do
+ * this for us. We map only very basic peripherals here.
+ */
+#define U8500_IO_VIRTUAL	0xf0000000
+#define U8500_IO_PHYSICAL	0xa0000000
+
+/* this macro is used in assembly, so no cast */
+#define IO_ADDRESS(x)           \
+	(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
+
+/* typesafe io address */
+#define __io_address(n)		__io(IO_ADDRESS(n))
+
+/*
+ * Base address definitions for U8500 Onchip IPs. All the
+ * peripherals are contained in a single 1 Mbyte region, with
+ * AHB peripherals at the bottom and APB peripherals at the
+ * top of the region. PER stands for PERIPHERAL region which
+ * itself divided into sub regions.
+ */
+#define U8500_PER3_BASE		0x80000000
+#define U8500_PER2_BASE		0x80110000
+#define U8500_PER1_BASE		0x80120000
+#define U8500_PER4_BASE		0x80150000
+
+#define U8500_PER6_BASE		0xa03c0000
+#define U8500_PER5_BASE		0xa03e0000
+#define U8500_PER7_BASE		0xa03d0000
+
+#define U8500_SVA_BASE		0xa0100000
+#define U8500_SIA_BASE		0xa0200000
+
+#define U8500_SGA_BASE		0xa0300000
+#define U8500_MCDE_BASE		0xa0350000
+#define U8500_DMA_BASE		0xa0362000
+
+#define U8500_SCU_BASE		0xa0410000
+#define U8500_GIC_CPU_BASE	0xa0410100
+#define U8500_TWD_BASE		0xa0410600
+#define U8500_GIC_DIST_BASE	0xa0411000
+#define U8500_L2CC_BASE		0xa0412000
+
+#define U8500_TWD_SIZE		0x100
+
+/* per7 base addressess */
+#define U8500_CR_BASE		(U8500_PER7_BASE + 0x8000)
+#define U8500_MTU0_BASE		(U8500_PER7_BASE + 0xa000)
+#define U8500_MTU1_BASE		(U8500_PER7_BASE + 0xb000)
+#define U8500_TZPC0_BASE	(U8500_PER7_BASE + 0xc000)
+#define U8500_CLKRST7_BASE	(U8500_PER7_BASE + 0xf000)
+
+/* per6 base addressess */
+#define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x2000)
+#define U8500_CRYPTO0_BASE	(U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE	(U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE	(U8500_PER7_BASE + 0xf000)
+
+/* per5 base addressess */
+#define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
+#define U8500_GPIO5_BASE	(U8500_PER5_BASE + 0x1e000)
+#define U8500_CLKRST5_BASE	(U8500_PER7_BASE + 0x1f000)
+
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x0000)
+#define U8500_BACKUPRAM1_BASE	(U8500_PER4_BASE + 0x1000)
+#define U8500_RTT0_BASE		(U8500_PER4_BASE + 0x2000)
+#define U8500_RTT1_BASE		(U8500_PER4_BASE + 0x3000)
+#define U8500_RTC_BASE		(U8500_PER4_BASE + 0x4000)
+#define U8500_SCR_BASE		(U8500_PER4_BASE + 0x5000)
+#define U8500_DMC_BASE		(U8500_PER4_BASE + 0x6000)
+#define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x7000)
+
+/* per3 base addressess */
+#define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE		(U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE		(U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE		(U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE		(U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE		(U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
+#define U8500_GPIO3_BASE	(U8500_PER3_BASE + 0xe000)
+#define U8500_CLKRST3_BASE	(U8500_PER7_BASE + 0xf000)
+
+/* per2 base addressess */
+#define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE		(U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE		(U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE		(U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE		(U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE		(U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE		(U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE		(U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE		(U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE		(U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE		(U8500_PER2_BASE + 0xc000)
+#define U8500_GPIO2_BASE	(U8500_PER2_BASE + 0xe000)
+#define U8500_CLKRST2_BASE	(U8500_PER2_BASE + 0xf000)
+
+/* per1 base addresses */
+#define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
+#define U8500_I2C1_BASE		(U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE		(U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE		(U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE		(U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE		(U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
+#define U8500_SLIM0_BASE	(U8500_PER1_BASE + 0xa000)
+#define U8500_GPIO1_BASE	(U8500_PER1_BASE + 0xe000)
+#define U8500_CLKRST1_BASE	(U8500_PER2_BASE + 0xf000)
+
+/* ST-Ericsson modified pl022 id */
+#define SSP_PER_ID		0x01080022
+
+#endif				/* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/io.h b/arch/arm/mach-ux500/include/mach/io.h
new file mode 100644
index 000000000000..1cf3f44ce5b2
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-u8500/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
new file mode 100644
index 000000000000..394b5dd2200f
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -0,0 +1,71 @@
+/*
+ *  Copyright (C) 2008 STMicroelectronics
+ *  Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef ASM_ARCH_IRQS_H
+#define ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_LOCALTIMER                  29
+#define IRQ_LOCALWDOG                   30
+
+/* Shared Peripheral Interrupt (SHPI) */
+#define IRQ_SHPI_START			32
+
+/* Interrupt numbers generic for shared peripheral */
+#define IRQ_MTU0		(IRQ_SHPI_START + 4)
+#define IRQ_SPI2		(IRQ_SHPI_START + 6)
+#define IRQ_SPI0		(IRQ_SHPI_START + 8)
+#define IRQ_UART0		(IRQ_SHPI_START + 11)
+#define IRQ_I2C3		(IRQ_SHPI_START + 12)
+#define IRQ_SSP0		(IRQ_SHPI_START + 14)
+#define IRQ_MTU1		(IRQ_SHPI_START + 17)
+#define IRQ_RTC_RTT		(IRQ_SHPI_START + 18)
+#define IRQ_UART1		(IRQ_SHPI_START + 19)
+#define IRQ_I2C0		(IRQ_SHPI_START + 21)
+#define IRQ_I2C1		(IRQ_SHPI_START + 22)
+#define IRQ_USBOTG		(IRQ_SHPI_START + 23)
+#define IRQ_DMA			(IRQ_SHPI_START + 25)
+#define IRQ_UART2		(IRQ_SHPI_START + 26)
+#define IRQ_HSIR_EXCEP		(IRQ_SHPI_START + 29)
+#define IRQ_MSP0		(IRQ_SHPI_START + 31)
+#define IRQ_HSIR_CH0_OVRRUN	(IRQ_SHPI_START + 32)
+#define IRQ_HSIR_CH1_OVRRUN	(IRQ_SHPI_START + 33)
+#define IRQ_HSIR_CH2_OVRRUN	(IRQ_SHPI_START + 34)
+#define IRQ_HSIR_CH3_OVRRUN	(IRQ_SHPI_START + 35)
+#define IRQ_AB4500		(IRQ_SHPI_START + 40)
+#define IRQ_DISP		(IRQ_SHPI_START + 48)
+#define IRQ_SiPI3		(IRQ_SHPI_START + 49)
+#define IRQ_SSP1		(IRQ_SHPI_START + 52)
+#define IRQ_I2C2		(IRQ_SHPI_START + 55)
+#define IRQ_SDMMC0		(IRQ_SHPI_START + 60)
+#define IRQ_MSP1		(IRQ_SHPI_START + 62)
+#define IRQ_SPI1		(IRQ_SHPI_START + 96)
+#define IRQ_MSP2		(IRQ_SHPI_START + 98)
+#define IRQ_SDMMC4		(IRQ_SHPI_START + 99)
+#define IRQ_HSIRD0		(IRQ_SHPI_START + 104)
+#define IRQ_HSIRD1		(IRQ_SHPI_START + 105)
+#define IRQ_HSITD0		(IRQ_SHPI_START + 106)
+#define IRQ_HSITD1		(IRQ_SHPI_START + 107)
+#define IRQ_GPIO0		(IRQ_SHPI_START + 119)
+#define IRQ_GPIO1		(IRQ_SHPI_START + 120)
+#define IRQ_GPIO2		(IRQ_SHPI_START + 121)
+#define IRQ_GPIO3		(IRQ_SHPI_START + 122)
+#define IRQ_GPIO4		(IRQ_SHPI_START + 123)
+#define IRQ_GPIO5		(IRQ_SHPI_START + 124)
+#define IRQ_GPIO6		(IRQ_SHPI_START + 125)
+#define IRQ_GPIO7		(IRQ_SHPI_START + 126)
+#define IRQ_GPIO8		(IRQ_SHPI_START + 127)
+
+/* There are 128 shared peripheral interrupts assigned to
+ * INTID[160:32]. The first 32 interrupts are reserved.
+ */
+#define NR_IRQS			161
+
+#endif /*ASM_ARCH_IRQS_H*/
diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h
new file mode 100644
index 000000000000..510571a59e25
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/memory.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+#define BUS_OFFSET	UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
new file mode 100644
index 000000000000..cf0ce1687f24
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+extern void u8500_map_io(void);
+extern void u8500_init_devices(void);
+extern void u8500_init_irq(void);
+/* We re-use nomadik_timer for this platform */
+extern void nmdk_timer_init(void);
+
+#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
new file mode 100644
index 000000000000..b59f7bc9725d
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -0,0 +1,32 @@
+/*
+ * This file is based ARM realview platform.
+ * Copyright (C) ARM Limited.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef ASMARM_ARCH_SMP_H
+#define ASMARM_ARCH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+/* This is required to wakeup the secondary core */
+extern void u8500_secondary_startup(void);
+
+#define hard_smp_processor_id()				\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x0F;				\
+	})
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
new file mode 100644
index 000000000000..c0cd8006f1a2
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/system.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/* yet to be implemented - TODO */
+}
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h
new file mode 100644
index 000000000000..d0942c174018
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE		110000000
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
new file mode 100644
index 000000000000..8552eb188b50
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -0,0 +1,58 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/setup.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+#define U8500_UART_DR		0x80007000
+#define U8500_UART_LCRH		0x8000702c
+#define U8500_UART_CR		0x80007030
+#define U8500_UART_FR		0x80007018
+
+static void putc(const char c)
+{
+	/* Do nothing if the UART is not enabled. */
+	if (!(readb(U8500_UART_CR) & 0x1))
+		return;
+
+	if (c == '\n')
+		putc('\r');
+
+	while (readb(U8500_UART_FR) & (1 << 5))
+		barrier();
+	writeb(c, U8500_UART_DR);
+}
+
+static void flush(void)
+{
+	if (!(readb(U8500_UART_CR) & 0x1))
+		return;
+	while (readb(U8500_UART_FR) & (1 << 3))
+		barrier();
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog() /* nothing to do here */
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h
new file mode 100644
index 000000000000..86cdbbce1842
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/vmalloc.h
@@ -0,0 +1,18 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END	0xf0000000
diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c
new file mode 100644
index 000000000000..2288f6a7c518
--- /dev/null
+++ b/arch/arm/mach-ux500/localtimer.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is heavily based on relaview platform, almost a copy.
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
new file mode 100644
index 000000000000..8dfe7ca245d8
--- /dev/null
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * Copyright (C) 2008 STMicroelctronics.
+ * Copyright (C) 2009 ST-Ericsson.
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is based on arm realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
+static unsigned int __init get_core_count(void)
+{
+	return scu_get_core_count(__io_address(U8500_SCU_BASE));
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 */
+	pen_release = cpu;
+	flush_cache_all();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		if (pen_release == -1)
+			break;
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+	/* nobody is to be released from the pen yet */
+	pen_release = -1;
+
+	/*
+	 * write the address of secondary startup into the backup ram register
+	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
+	 * backup ram register at offset 0x1FF0, which is what boot rom code
+	 * is waiting for. This would wake up the secondary core from WFE
+	 */
+#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
+	__raw_writel(virt_to_phys(u8500_secondary_startup),
+		(void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+		U8500_CPU1_JUMPADDR_OFFSET);
+
+#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
+	__raw_writel(0xA1FEED01,
+		(void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+		U8500_CPU1_WAKEMAGIC_OFFSET);
+
+	/* make sure write buffer is drained */
+	mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = get_core_count();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "U8500: strange CM count of 0? Default to 1\n");
+		ncores = 1;
+	}
+
+	if (ncores > num_possible_cpus())	{
+		printk(KERN_WARNING
+		       "U8500: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, num_possible_cpus());
+		ncores = num_possible_cpus();
+	}
+
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	if (max_cpus > 1) {
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+		scu_enable(__io_address(U8500_SCU_BASE));
+		wakeup_secondary();
+	}
+}
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 2a6f98de48d2..51f17b753348 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -32,6 +32,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/regs-serial.h>
+#include <mach/nuc900_spi.h>
 #include <mach/map.h>
 
 #include "cpu.h"
@@ -196,6 +197,18 @@ static struct platform_device nuc900_device_emc = {
 
 /* SPI device */
 
+static struct w90p910_spi_info nuc900_spiflash_data = {
+	.num_cs		= 1,
+	.lsb		= 0,
+	.txneg		= 1,
+	.rxneg		= 0,
+	.divider	= 24,
+	.sleep		= 0,
+	.txnum		= 0,
+	.txbitlen	= 1,
+	.bus_num	= 0,
+};
+
 static struct resource nuc900_spi_resource[] = {
 	[0] = {
 		.start = W90X900_PA_I2C + SPIOFFSET,
@@ -214,6 +227,9 @@ static struct platform_device nuc900_device_spi = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(nuc900_spi_resource),
 	.resource	= nuc900_spi_resource,
+	.dev		= {
+				.platform_data = &nuc900_spiflash_data,
+			}
 };
 
 /* spi device, spi flash info */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9264d814cd7a..dd4698c67cc3 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -388,7 +388,7 @@ config CPU_FEROCEON_OLD_ID
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_PABRT_V6
@@ -764,6 +764,15 @@ config CACHE_L2X0
 	help
 	  This option enables the L2x0 PrimeCell.
 
+config CACHE_TAUROS2
+	bool "Enable the Tauros2 L2 cache controller"
+	depends on ARCH_DOVE
+	default y
+	select OUTER_CACHE
+	help
+	  This option enables the Tauros2 L2 cache controller (as
+	  found on PJ1/PJ4).
+
 config CACHE_XSC3L2
 	bool "Enable the L2 cache on XScale3"
 	depends on CPU_XSC3
@@ -774,5 +783,5 @@ config CACHE_XSC3L2
 
 config ARM_L1_CACHE_SHIFT
 	int
-	default 6 if ARCH_OMAP3
+	default 6 if ARCH_OMAP3 || ARCH_S5PC1XX
 	default 5
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 055cb2aa8134..827e238e5d4a 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -6,7 +6,7 @@ obj-y				:= dma-mapping.o extable.o fault.o init.o \
 				   iomap.o
 
 obj-$(CONFIG_MMU)		+= fault-armv.o flush.o ioremap.o mmap.o \
-				   pgd.o mmu.o
+				   pgd.o mmu.o vmregion.o
 
 ifneq ($(CONFIG_MMU),y)
 obj-y				+= nommu.o
@@ -87,4 +87,4 @@ obj-$(CONFIG_CPU_V7)		+= proc-v7.o
 obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
-
+obj-$(CONFIG_CACHE_TAUROS2)	+= cache-tauros2.o
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index b480f1d3591f..747f9a9021bb 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -99,18 +99,25 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 
 	l2x0_base = base;
 
-	/* disable L2X0 */
-	writel(0, l2x0_base + L2X0_CTRL);
+	/*
+	 * Check if l2x0 controller is already enabled.
+	 * If you are booting from non-secure mode
+	 * accessing the below registers will fault.
+	 */
+	if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
 
-	aux = readl(l2x0_base + L2X0_AUX_CTRL);
-	aux &= aux_mask;
-	aux |= aux_val;
-	writel(aux, l2x0_base + L2X0_AUX_CTRL);
+		/* l2x0 controller is disabled */
 
-	l2x0_inv_all();
+		aux = readl(l2x0_base + L2X0_AUX_CTRL);
+		aux &= aux_mask;
+		aux |= aux_val;
+		writel(aux, l2x0_base + L2X0_AUX_CTRL);
 
-	/* enable L2X0 */
-	writel(1, l2x0_base + L2X0_CTRL);
+		l2x0_inv_all();
+
+		/* enable L2X0 */
+		writel(1, l2x0_base + L2X0_CTRL);
+	}
 
 	outer_cache.inv_range = l2x0_inv_range;
 	outer_cache.clean_range = l2x0_clean_range;
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
new file mode 100644
index 000000000000..50868651890f
--- /dev/null
+++ b/arch/arm/mm/cache-tauros2.c
@@ -0,0 +1,263 @@
+/*
+ * arch/arm/mm/cache-tauros2.c - Tauros2 L2 cache controller support
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * References:
+ * - PJ1 CPU Core Datasheet,
+ *   Document ID MV-S104837-01, Rev 0.7, January 24 2008.
+ * - PJ4 CPU Core Datasheet,
+ *   Document ID MV-S105190-00, Rev 0.7, March 14 2008.
+ */
+
+#include <linux/init.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-tauros2.h>
+
+
+/*
+ * When Tauros2 is used on a CPU that supports the v7 hierarchical
+ * cache operations, the cache handling code in proc-v7.S takes care
+ * of everything, including handling DMA coherency.
+ *
+ * So, we only need to register outer cache operations here if we're
+ * being used on a pre-v7 CPU, and we only need to build support for
+ * outer cache operations into the kernel image if the kernel has been
+ * configured to support a pre-v7 CPU.
+ */
+#if __LINUX_ARM_ARCH__ < 7
+/*
+ * Low-level cache maintenance operations.
+ */
+static inline void tauros2_clean_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c11, 3" : : "r" (addr));
+}
+
+static inline void tauros2_clean_inv_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c15, 3" : : "r" (addr));
+}
+
+static inline void tauros2_inv_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c7, 3" : : "r" (addr));
+}
+
+
+/*
+ * Linux primitives.
+ *
+ * Note that the end addresses passed to Linux primitives are
+ * noninclusive.
+ */
+#define CACHE_LINE_SIZE		32
+
+static void tauros2_inv_range(unsigned long start, unsigned long end)
+{
+	/*
+	 * Clean and invalidate partial first cache line.
+	 */
+	if (start & (CACHE_LINE_SIZE - 1)) {
+		tauros2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+	}
+
+	/*
+	 * Clean and invalidate partial last cache line.
+	 */
+	if (end & (CACHE_LINE_SIZE - 1)) {
+		tauros2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+		end &= ~(CACHE_LINE_SIZE - 1);
+	}
+
+	/*
+	 * Invalidate all full cache lines between 'start' and 'end'.
+	 */
+	while (start < end) {
+		tauros2_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static void tauros2_clean_range(unsigned long start, unsigned long end)
+{
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		tauros2_clean_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static void tauros2_flush_range(unsigned long start, unsigned long end)
+{
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		tauros2_clean_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+#endif
+
+static inline u32 __init read_extra_features(void)
+{
+	u32 u;
+
+	__asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
+
+	return u;
+}
+
+static inline void __init write_extra_features(u32 u)
+{
+	__asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
+}
+
+static void __init disable_l2_prefetch(void)
+{
+	u32 u;
+
+	/*
+	 * Read the CPU Extra Features register and verify that the
+	 * Disable L2 Prefetch bit is set.
+	 */
+	u = read_extra_features();
+	if (!(u & 0x01000000)) {
+		printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n");
+		write_extra_features(u | 0x01000000);
+	}
+}
+
+static inline int __init cpuid_scheme(void)
+{
+	extern int processor_id;
+
+	return !!((processor_id & 0x000f0000) == 0x000f0000);
+}
+
+static inline u32 __init read_mmfr3(void)
+{
+	u32 mmfr3;
+
+	__asm__("mrc p15, 0, %0, c0, c1, 7\n" : "=r" (mmfr3));
+
+	return mmfr3;
+}
+
+static inline u32 __init read_actlr(void)
+{
+	u32 actlr;
+
+	__asm__("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
+
+	return actlr;
+}
+
+static inline void __init write_actlr(u32 actlr)
+{
+	__asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
+}
+
+void __init tauros2_init(void)
+{
+	extern int processor_id;
+	char *mode;
+
+	disable_l2_prefetch();
+
+#ifdef CONFIG_CPU_32v5
+	if ((processor_id & 0xff0f0000) == 0x56050000) {
+		u32 feat;
+
+		/*
+		 * v5 CPUs with Tauros2 have the L2 cache enable bit
+		 * located in the CPU Extra Features register.
+		 */
+		feat = read_extra_features();
+		if (!(feat & 0x00400000)) {
+			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+			write_extra_features(feat | 0x00400000);
+		}
+
+		mode = "ARMv5";
+		outer_cache.inv_range = tauros2_inv_range;
+		outer_cache.clean_range = tauros2_clean_range;
+		outer_cache.flush_range = tauros2_flush_range;
+	}
+#endif
+
+#ifdef CONFIG_CPU_32v6
+	/*
+	 * Check whether this CPU lacks support for the v7 hierarchical
+	 * cache ops.  (PJ4 is in its v6 personality mode if the MMFR3
+	 * register indicates no support for the v7 hierarchical cache
+	 * ops.)
+	 */
+	if (cpuid_scheme() && (read_mmfr3() & 0xf) == 0) {
+		/*
+		 * When Tauros2 is used in an ARMv6 system, the L2
+		 * enable bit is in the ARMv6 ARM-mandated position
+		 * (bit [26] of the System Control Register).
+		 */
+		if (!(get_cr() & 0x04000000)) {
+			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+			adjust_cr(0x04000000, 0x04000000);
+		}
+
+		mode = "ARMv6";
+		outer_cache.inv_range = tauros2_inv_range;
+		outer_cache.clean_range = tauros2_clean_range;
+		outer_cache.flush_range = tauros2_flush_range;
+	}
+#endif
+
+#ifdef CONFIG_CPU_32v7
+	/*
+	 * Check whether this CPU has support for the v7 hierarchical
+	 * cache ops.  (PJ4 is in its v7 personality mode if the MMFR3
+	 * register indicates support for the v7 hierarchical cache
+	 * ops.)
+	 *
+	 * (Although strictly speaking there may exist CPUs that
+	 * implement the v7 cache ops but are only ARMv6 CPUs (due to
+	 * not complying with all of the other ARMv7 requirements),
+	 * there are no real-life examples of Tauros2 being used on
+	 * such CPUs as of yet.)
+	 */
+	if (cpuid_scheme() && (read_mmfr3() & 0xf) == 1) {
+		u32 actlr;
+
+		/*
+		 * When Tauros2 is used in an ARMv7 system, the L2
+		 * enable bit is located in the Auxiliary System Control
+		 * Register (which is the only register allowed by the
+		 * ARMv7 spec to contain fine-grained cache control bits).
+		 */
+		actlr = read_actlr();
+		if (!(actlr & 0x00000002)) {
+			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+			write_actlr(actlr | 0x00000002);
+		}
+
+		mode = "ARMv7";
+	}
+#endif
+
+	if (mode == NULL) {
+		printk(KERN_CRIT "Tauros2: Unable to detect CPU mode.\n");
+		return;
+	}
+
+	printk(KERN_INFO "Tauros2: L2 cache support initialised "
+			 "in %s mode.\n", mode);
+}
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 4127a7bddfe5..841f355319bf 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -41,6 +41,14 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to,
 	kfrom = kmap_atomic(from, KM_USER0);
 	kto = kmap_atomic(to, KM_USER1);
 	copy_page(kto, kfrom);
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * kmap_atomic() doesn't set the page virtual address, and
+	 * kunmap_atomic() takes care of cache flushing already.
+	 */
+	if (page_address(to) != NULL)
+#endif
+		__cpuc_flush_dcache_page(kto);
 	kunmap_atomic(kto, KM_USER1);
 	kunmap_atomic(kfrom, KM_USER0);
 }
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index b9590a7085ca..26325cb5d368 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -63,194 +63,152 @@ static u64 get_coherent_dma_mask(struct device *dev)
 	return mask;
 }
 
-#ifdef CONFIG_MMU
 /*
- * These are the page tables (2MB each) covering uncached, DMA consistent allocations
+ * Allocate a DMA buffer for 'dev' of size 'size' using the
+ * specified gfp mask.  Note that 'size' must be page aligned.
  */
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
-static DEFINE_SPINLOCK(consistent_lock);
+static struct page *__dma_alloc_buffer(struct device *dev, size_t size, gfp_t gfp)
+{
+	unsigned long order = get_order(size);
+	struct page *page, *p, *e;
+	void *ptr;
+	u64 mask = get_coherent_dma_mask(dev);
 
-/*
- * VM region handling support.
- *
- * This should become something generic, handling VM region allocations for
- * vmalloc and similar (ioremap, module space, etc).
- *
- * I envisage vmalloc()'s supporting vm_struct becoming:
- *
- *  struct vm_struct {
- *    struct vm_region	region;
- *    unsigned long	flags;
- *    struct page	**pages;
- *    unsigned int	nr_pages;
- *    unsigned long	phys_addr;
- *  };
- *
- * get_vm_area() would then call vm_region_alloc with an appropriate
- * struct vm_region head (eg):
- *
- *  struct vm_region vmalloc_head = {
- *	.vm_list	= LIST_HEAD_INIT(vmalloc_head.vm_list),
- *	.vm_start	= VMALLOC_START,
- *	.vm_end		= VMALLOC_END,
- *  };
- *
- * However, vmalloc_head.vm_start is variable (typically, it is dependent on
- * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
- * would have to initialise this each time prior to calling vm_region_alloc().
- */
-struct arm_vm_region {
-	struct list_head	vm_list;
-	unsigned long		vm_start;
-	unsigned long		vm_end;
-	struct page		*vm_pages;
-	int			vm_active;
-};
+#ifdef CONFIG_DMA_API_DEBUG
+	u64 limit = (mask + 1) & ~mask;
+	if (limit && size >= limit) {
+		dev_warn(dev, "coherent allocation too big (requested %#x mask %#llx)\n",
+			size, mask);
+		return NULL;
+	}
+#endif
 
-static struct arm_vm_region consistent_head = {
-	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
-	.vm_start	= CONSISTENT_BASE,
-	.vm_end		= CONSISTENT_END,
-};
+	if (!mask)
+		return NULL;
 
-static struct arm_vm_region *
-arm_vm_region_alloc(struct arm_vm_region *head, size_t size, gfp_t gfp)
-{
-	unsigned long addr = head->vm_start, end = head->vm_end - size;
-	unsigned long flags;
-	struct arm_vm_region *c, *new;
-
-	new = kmalloc(sizeof(struct arm_vm_region), gfp);
-	if (!new)
-		goto out;
-
-	spin_lock_irqsave(&consistent_lock, flags);
-
-	list_for_each_entry(c, &head->vm_list, vm_list) {
-		if ((addr + size) < addr)
-			goto nospc;
-		if ((addr + size) <= c->vm_start)
-			goto found;
-		addr = c->vm_end;
-		if (addr > end)
-			goto nospc;
-	}
+	if (mask < 0xffffffffULL)
+		gfp |= GFP_DMA;
+
+	page = alloc_pages(gfp, order);
+	if (!page)
+		return NULL;
 
- found:
 	/*
-	 * Insert this entry _before_ the one we found.
+	 * Now split the huge page and free the excess pages
 	 */
-	list_add_tail(&new->vm_list, &c->vm_list);
-	new->vm_start = addr;
-	new->vm_end = addr + size;
-	new->vm_active = 1;
-
-	spin_unlock_irqrestore(&consistent_lock, flags);
-	return new;
-
- nospc:
-	spin_unlock_irqrestore(&consistent_lock, flags);
-	kfree(new);
- out:
-	return NULL;
+	split_page(page, order);
+	for (p = page + (size >> PAGE_SHIFT), e = page + (1 << order); p < e; p++)
+		__free_page(p);
+
+	/*
+	 * Ensure that the allocated pages are zeroed, and that any data
+	 * lurking in the kernel direct-mapped region is invalidated.
+	 */
+	ptr = page_address(page);
+	memset(ptr, 0, size);
+	dmac_flush_range(ptr, ptr + size);
+	outer_flush_range(__pa(ptr), __pa(ptr) + size);
+
+	return page;
 }
 
-static struct arm_vm_region *arm_vm_region_find(struct arm_vm_region *head, unsigned long addr)
+/*
+ * Free a DMA buffer.  'size' must be page aligned.
+ */
+static void __dma_free_buffer(struct page *page, size_t size)
 {
-	struct arm_vm_region *c;
-	
-	list_for_each_entry(c, &head->vm_list, vm_list) {
-		if (c->vm_active && c->vm_start == addr)
-			goto out;
+	struct page *e = page + (size >> PAGE_SHIFT);
+
+	while (page < e) {
+		__free_page(page);
+		page++;
 	}
-	c = NULL;
- out:
-	return c;
 }
 
+#ifdef CONFIG_MMU
+/*
+ * These are the page tables (2MB each) covering uncached, DMA consistent allocations
+ */
+static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
+
+#include "vmregion.h"
+
+static struct arm_vmregion_head consistent_head = {
+	.vm_lock	= __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
+	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
+	.vm_start	= CONSISTENT_BASE,
+	.vm_end		= CONSISTENT_END,
+};
+
 #ifdef CONFIG_HUGETLB_PAGE
 #error ARM Coherent DMA allocator does not (yet) support huge TLB
 #endif
 
-static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
-	    pgprot_t prot)
+/*
+ * Initialise the consistent memory allocation.
+ */
+static int __init consistent_init(void)
 {
-	struct page *page;
-	struct arm_vm_region *c;
-	unsigned long order;
-	u64 mask = get_coherent_dma_mask(dev);
-	u64 limit;
+	int ret = 0;
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *pte;
+	int i = 0;
+	u32 base = CONSISTENT_BASE;
 
-	if (!consistent_pte[0]) {
-		printk(KERN_ERR "%s: not initialised\n", __func__);
-		dump_stack();
-		return NULL;
-	}
+	do {
+		pgd = pgd_offset(&init_mm, base);
+		pmd = pmd_alloc(&init_mm, pgd, base);
+		if (!pmd) {
+			printk(KERN_ERR "%s: no pmd tables\n", __func__);
+			ret = -ENOMEM;
+			break;
+		}
+		WARN_ON(!pmd_none(*pmd));
 
-	if (!mask)
-		goto no_page;
+		pte = pte_alloc_kernel(pmd, base);
+		if (!pte) {
+			printk(KERN_ERR "%s: no pte tables\n", __func__);
+			ret = -ENOMEM;
+			break;
+		}
 
-	/*
-	 * Sanity check the allocation size.
-	 */
-	size = PAGE_ALIGN(size);
-	limit = (mask + 1) & ~mask;
-	if ((limit && size >= limit) ||
-	    size >= (CONSISTENT_END - CONSISTENT_BASE)) {
-		printk(KERN_WARNING "coherent allocation too big "
-		       "(requested %#x mask %#llx)\n", size, mask);
-		goto no_page;
-	}
+		consistent_pte[i++] = pte;
+		base += (1 << PGDIR_SHIFT);
+	} while (base < CONSISTENT_END);
 
-	order = get_order(size);
+	return ret;
+}
 
-	if (mask < 0xffffffffULL)
-		gfp |= GFP_DMA;
+core_initcall(consistent_init);
 
-	page = alloc_pages(gfp, order);
-	if (!page)
-		goto no_page;
+static void *
+__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
+{
+	struct arm_vmregion *c;
 
-	/*
-	 * Invalidate any data that might be lurking in the
-	 * kernel direct-mapped region for device DMA.
-	 */
-	{
-		void *ptr = page_address(page);
-		memset(ptr, 0, size);
-		dmac_flush_range(ptr, ptr + size);
-		outer_flush_range(__pa(ptr), __pa(ptr) + size);
+	if (!consistent_pte[0]) {
+		printk(KERN_ERR "%s: not initialised\n", __func__);
+		dump_stack();
+		return NULL;
 	}
 
 	/*
 	 * Allocate a virtual address in the consistent mapping region.
 	 */
-	c = arm_vm_region_alloc(&consistent_head, size,
+	c = arm_vmregion_alloc(&consistent_head, size,
 			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
 	if (c) {
 		pte_t *pte;
-		struct page *end = page + (1 << order);
 		int idx = CONSISTENT_PTE_INDEX(c->vm_start);
 		u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
 
 		pte = consistent_pte[idx] + off;
 		c->vm_pages = page;
 
-		split_page(page, order);
-
-		/*
-		 * Set the "dma handle"
-		 */
-		*handle = page_to_dma(dev, page);
-
 		do {
 			BUG_ON(!pte_none(*pte));
 
-			/*
-			 * x86 does not mark the pages reserved...
-			 */
-			SetPageReserved(page);
 			set_pte_ext(pte, mk_pte(page, prot), 0);
 			page++;
 			pte++;
@@ -261,48 +219,90 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 			}
 		} while (size -= PAGE_SIZE);
 
-		/*
-		 * Free the otherwise unused pages.
-		 */
-		while (page < end) {
-			__free_page(page);
-			page++;
-		}
-
 		return (void *)c->vm_start;
 	}
-
-	if (page)
-		__free_pages(page, order);
- no_page:
-	*handle = ~0;
 	return NULL;
 }
+
+static void __dma_free_remap(void *cpu_addr, size_t size)
+{
+	struct arm_vmregion *c;
+	unsigned long addr;
+	pte_t *ptep;
+	int idx;
+	u32 off;
+
+	c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr);
+	if (!c) {
+		printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+		       __func__, cpu_addr);
+		dump_stack();
+		return;
+	}
+
+	if ((c->vm_end - c->vm_start) != size) {
+		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+		       __func__, c->vm_end - c->vm_start, size);
+		dump_stack();
+		size = c->vm_end - c->vm_start;
+	}
+
+	idx = CONSISTENT_PTE_INDEX(c->vm_start);
+	off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+	ptep = consistent_pte[idx] + off;
+	addr = c->vm_start;
+	do {
+		pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
+
+		ptep++;
+		addr += PAGE_SIZE;
+		off++;
+		if (off >= PTRS_PER_PTE) {
+			off = 0;
+			ptep = consistent_pte[++idx];
+		}
+
+		if (pte_none(pte) || !pte_present(pte))
+			printk(KERN_CRIT "%s: bad page in kernel page table\n",
+			       __func__);
+	} while (size -= PAGE_SIZE);
+
+	flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+	arm_vmregion_free(&consistent_head, c);
+}
+
 #else	/* !CONFIG_MMU */
+
+#define __dma_alloc_remap(page, size, gfp, prot)	page_address(page)
+#define __dma_free_remap(addr, size)			do { } while (0)
+
+#endif	/* CONFIG_MMU */
+
 static void *
 __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	    pgprot_t prot)
 {
-	void *virt;
-	u64 mask = get_coherent_dma_mask(dev);
+	struct page *page;
+	void *addr;
 
-	if (!mask)
-		goto error;
+	*handle = ~0;
+	size = PAGE_ALIGN(size);
 
-	if (mask < 0xffffffffULL)
-		gfp |= GFP_DMA;
-	virt = kmalloc(size, gfp);
-	if (!virt)
-		goto error;
+	page = __dma_alloc_buffer(dev, size, gfp);
+	if (!page)
+		return NULL;
 
-	*handle =  virt_to_dma(dev, virt);
-	return virt;
+	if (!arch_is_coherent())
+		addr = __dma_alloc_remap(page, size, gfp, prot);
+	else
+		addr = page_address(page);
 
-error:
-	*handle = ~0;
-	return NULL;
+	if (addr)
+		*handle = page_to_dma(dev, page);
+
+	return addr;
 }
-#endif	/* CONFIG_MMU */
 
 /*
  * Allocate DMA-coherent memory space and return both the kernel remapped
@@ -316,19 +316,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gf
 	if (dma_alloc_from_coherent(dev, size, handle, &memory))
 		return memory;
 
-	if (arch_is_coherent()) {
-		void *virt;
-
-		virt = kmalloc(size, gfp);
-		if (!virt)
-			return NULL;
-		*handle =  virt_to_dma(dev, virt);
-
-		return virt;
-	}
-
 	return __dma_alloc(dev, size, handle, gfp,
-			   pgprot_noncached(pgprot_kernel));
+			   pgprot_dmacoherent(pgprot_kernel));
 }
 EXPORT_SYMBOL(dma_alloc_coherent);
 
@@ -349,15 +338,12 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 {
 	int ret = -ENXIO;
 #ifdef CONFIG_MMU
-	unsigned long flags, user_size, kern_size;
-	struct arm_vm_region *c;
+	unsigned long user_size, kern_size;
+	struct arm_vmregion *c;
 
 	user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 
-	spin_lock_irqsave(&consistent_lock, flags);
-	c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
-	spin_unlock_irqrestore(&consistent_lock, flags);
-
+	c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
 	if (c) {
 		unsigned long off = vma->vm_pgoff;
 
@@ -379,7 +365,7 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
 		      void *cpu_addr, dma_addr_t dma_addr, size_t size)
 {
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	vma->vm_page_prot = pgprot_dmacoherent(vma->vm_page_prot);
 	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
 }
 EXPORT_SYMBOL(dma_mmap_coherent);
@@ -396,144 +382,23 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
  * free a page as defined by the above mapping.
  * Must not be called with IRQs disabled.
  */
-#ifdef CONFIG_MMU
 void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
 {
-	struct arm_vm_region *c;
-	unsigned long flags, addr;
-	pte_t *ptep;
-	int idx;
-	u32 off;
-
 	WARN_ON(irqs_disabled());
 
 	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
 		return;
 
-	if (arch_is_coherent()) {
-		kfree(cpu_addr);
-		return;
-	}
-
 	size = PAGE_ALIGN(size);
 
-	spin_lock_irqsave(&consistent_lock, flags);
-	c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
-	if (!c)
-		goto no_area;
-
-	c->vm_active = 0;
-	spin_unlock_irqrestore(&consistent_lock, flags);
-
-	if ((c->vm_end - c->vm_start) != size) {
-		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
-		       __func__, c->vm_end - c->vm_start, size);
-		dump_stack();
-		size = c->vm_end - c->vm_start;
-	}
-
-	idx = CONSISTENT_PTE_INDEX(c->vm_start);
-	off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
-	ptep = consistent_pte[idx] + off;
-	addr = c->vm_start;
-	do {
-		pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
-		unsigned long pfn;
-
-		ptep++;
-		addr += PAGE_SIZE;
-		off++;
-		if (off >= PTRS_PER_PTE) {
-			off = 0;
-			ptep = consistent_pte[++idx];
-		}
-
-		if (!pte_none(pte) && pte_present(pte)) {
-			pfn = pte_pfn(pte);
-
-			if (pfn_valid(pfn)) {
-				struct page *page = pfn_to_page(pfn);
-
-				/*
-				 * x86 does not mark the pages reserved...
-				 */
-				ClearPageReserved(page);
-
-				__free_page(page);
-				continue;
-			}
-		}
-
-		printk(KERN_CRIT "%s: bad page in kernel page table\n",
-		       __func__);
-	} while (size -= PAGE_SIZE);
-
-	flush_tlb_kernel_range(c->vm_start, c->vm_end);
-
-	spin_lock_irqsave(&consistent_lock, flags);
-	list_del(&c->vm_list);
-	spin_unlock_irqrestore(&consistent_lock, flags);
-
-	kfree(c);
-	return;
+	if (!arch_is_coherent())
+		__dma_free_remap(cpu_addr, size);
 
- no_area:
-	spin_unlock_irqrestore(&consistent_lock, flags);
-	printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
-	       __func__, cpu_addr);
-	dump_stack();
+	__dma_free_buffer(dma_to_page(dev, handle), size);
 }
-#else	/* !CONFIG_MMU */
-void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
-{
-	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
-		return;
-	kfree(cpu_addr);
-}
-#endif	/* CONFIG_MMU */
 EXPORT_SYMBOL(dma_free_coherent);
 
 /*
- * Initialise the consistent memory allocation.
- */
-static int __init consistent_init(void)
-{
-	int ret = 0;
-#ifdef CONFIG_MMU
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-	int i = 0;
-	u32 base = CONSISTENT_BASE;
-
-	do {
-		pgd = pgd_offset(&init_mm, base);
-		pmd = pmd_alloc(&init_mm, pgd, base);
-		if (!pmd) {
-			printk(KERN_ERR "%s: no pmd tables\n", __func__);
-			ret = -ENOMEM;
-			break;
-		}
-		WARN_ON(!pmd_none(*pmd));
-
-		pte = pte_alloc_kernel(pmd, base);
-		if (!pte) {
-			printk(KERN_ERR "%s: no pte tables\n", __func__);
-			ret = -ENOMEM;
-			break;
-		}
-
-		consistent_pte[i++] = pte;
-		base += (1 << PGDIR_SHIFT);
-	} while (base < CONSISTENT_END);
-#endif	/* !CONFIG_MMU */
-
-	return ret;
-}
-
-core_initcall(consistent_init);
-
-/*
  * Make an area consistent for devices.
  * Note: Drivers should NOT use this function directly, as it will break
  * platforms with CONFIG_DMABOUNCE.
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index d0d17b6a3703..729602291958 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -23,6 +23,8 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
+#include "mm.h"
+
 static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE;
 
 /*
@@ -151,7 +153,14 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 	if (!pfn_valid(pfn))
 		return;
 
+	/*
+	 * The zero page is never written to, so never has any dirty
+	 * cache lines, and therefore never needs to be flushed.
+	 */
 	page = pfn_to_page(pfn);
+	if (page == ZERO_PAGE(0))
+		return;
+
 	mapping = page_mapping(page);
 #ifndef CONFIG_SMP
 	if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 7f294f307c83..329594e760cd 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -35,14 +35,12 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 	    :
 	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
 	    : "cc");
-	__flush_icache_all();
 }
 
 void flush_cache_mm(struct mm_struct *mm)
 {
 	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
-			__cpuc_flush_user_all();
+		vivt_flush_cache_mm(mm);
 		return;
 	}
 
@@ -52,16 +50,13 @@ void flush_cache_mm(struct mm_struct *mm)
 		    :
 		    : "r" (0)
 		    : "cc");
-		__flush_icache_all();
 	}
 }
 
 void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
 	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
-			__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
-						vma->vm_flags);
+		vivt_flush_cache_range(vma, start, end);
 		return;
 	}
 
@@ -71,22 +66,26 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
 		    :
 		    : "r" (0)
 		    : "cc");
-		__flush_icache_all();
 	}
+
+	if (vma->vm_flags & VM_EXEC)
+		__flush_icache_all();
 }
 
 void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
 	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-			unsigned long addr = user_addr & PAGE_MASK;
-			__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
-		}
+		vivt_flush_cache_page(vma, user_addr, pfn);
 		return;
 	}
 
-	if (cache_is_vipt_aliasing())
+	if (cache_is_vipt_aliasing()) {
 		flush_pfn_alias(pfn, user_addr);
+		__flush_icache_all();
+	}
+
+	if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
+		__flush_icache_all();
 }
 
 void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
@@ -94,15 +93,13 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 			 unsigned long len, int write)
 {
 	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-			unsigned long addr = (unsigned long)kaddr;
-			__cpuc_coherent_kern_range(addr, addr + len);
-		}
+		vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write);
 		return;
 	}
 
 	if (cache_is_vipt_aliasing()) {
 		flush_pfn_alias(page_to_pfn(page), uaddr);
+		__flush_icache_all();
 		return;
 	}
 
@@ -120,6 +117,8 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 
 void __flush_dcache_page(struct address_space *mapping, struct page *page)
 {
+	void *addr = page_address(page);
+
 	/*
 	 * Writeback any data associated with the kernel mapping of this
 	 * page.  This ensures that data in the physical page is mutually
@@ -130,9 +129,9 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
 	 * kmap_atomic() doesn't set the page virtual address, and
 	 * kunmap_atomic() takes care of cache flushing already.
 	 */
-	if (page_address(page))
+	if (addr)
 #endif
-		__cpuc_flush_dcache_page(page_address(page));
+		__cpuc_flush_dcache_page(addr);
 
 	/*
 	 * If this is a page cache page, and we have an aliasing VIPT cache,
@@ -196,7 +195,16 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
  */
 void flush_dcache_page(struct page *page)
 {
-	struct address_space *mapping = page_mapping(page);
+	struct address_space *mapping;
+
+	/*
+	 * The zero page is never written to, so never has any dirty
+	 * cache lines, and therefore never needs to be flushed.
+	 */
+	if (page == ZERO_PAGE(0))
+		return;
+
+	mapping = page_mapping(page);
 
 #ifndef CONFIG_SMP
 	if (!PageHighMem(page) && mapping && !mapping_mapped(mapping))
@@ -242,6 +250,7 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l
 		 * userspace address only.
 		 */
 		flush_pfn_alias(pfn, vmaddr);
+		__flush_icache_all();
 	}
 
 	/*
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index c4f6f05198e0..a888363398f8 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -24,6 +24,8 @@ struct mem_type {
 
 const struct mem_type *get_mem_type(unsigned int type);
 
+extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+
 #endif
 
 struct map_desc;
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 2b7996401b0f..f5abc51c5a07 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -54,7 +54,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	 * We enforce the MAP_FIXED case.
 	 */
 	if (flags & MAP_FIXED) {
-		if (aliasing && flags & MAP_SHARED && addr & (SHMLBA - 1))
+		if (aliasing && flags & MAP_SHARED &&
+		    (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
 			return -EINVAL;
 		return addr;
 	}
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index ea67be0223ac..8c7fbd19a4b3 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -881,7 +881,7 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 				BOOTMEM_EXCLUSIVE);
 	}
 
-	if (machine_is_treo680()) {
+	if (machine_is_treo680() || machine_is_centro()) {
 		reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
 				BOOTMEM_EXCLUSIVE);
 		reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,
@@ -1036,7 +1036,7 @@ void __init paging_init(struct machine_desc *mdesc)
 	 */
 	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
 	empty_zero_page = virt_to_page(zero_page);
-	flush_dcache_page(empty_zero_page);
+	__flush_dcache_page(NULL, empty_zero_page);
 }
 
 /*
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 70f75d2e3ead..5485c821101c 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -130,9 +130,16 @@ ENTRY(cpu_v6_set_pte_ext)
 
 
 
-
+	.type	cpu_v6_name, #object
 cpu_v6_name:
 	.asciz	"ARMv6-compatible processor"
+	.size	cpu_v6_name, . - cpu_v6_name
+
+	.type	cpu_pj4_name, #object
+cpu_pj4_name:
+	.asciz	"Marvell PJ4 processor"
+	.size	cpu_pj4_name, . - cpu_pj4_name
+
 	.align
 
 	__INIT
@@ -241,3 +248,27 @@ __v6_proc_info:
 	.long	v6_user_fns
 	.long	v6_cache_fns
 	.size	__v6_proc_info, . - __v6_proc_info
+
+	.type	__pj4_v6_proc_info, #object
+__pj4_v6_proc_info:
+	.long	0x560f5810
+	.long	0xff0ffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_XN | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__v6_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_pj4_name
+	.long	v6_processor_functions
+	.long	v6wbi_tlb_fns
+	.long	v6_user_fns
+	.long	v6_cache_fns
+	.size	__pj4_v6_proc_info, . - __pj4_v6_proc_info
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 2028f3702881..fab134e29826 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -396,7 +396,7 @@ __xsc3_setup:
 	orr	r4, r4, #0x18			@ cache the page table in L2
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
 
-	mov	r0, #0				@ don't allow CP access
+	mov	r0, #1 << 6			@ cp6 access for early sched_clock
 	mcr	p15, 0, r0, c15, c1, 0		@ write CP access register
 
 	mrc	p15, 0, r0, c1, c0, 1		@ get auxiliary control reg
diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c
new file mode 100644
index 000000000000..19e09bdb1b8a
--- /dev/null
+++ b/arch/arm/mm/vmregion.c
@@ -0,0 +1,131 @@
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+
+#include "vmregion.h"
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ *  struct vm_struct {
+ *    struct vmregion	region;
+ *    unsigned long	flags;
+ *    struct page	**pages;
+ *    unsigned int	nr_pages;
+ *    unsigned long	phys_addr;
+ *  };
+ *
+ * get_vm_area() would then call vmregion_alloc with an appropriate
+ * struct vmregion head (eg):
+ *
+ *  struct vmregion vmalloc_head = {
+ *	.vm_list	= LIST_HEAD_INIT(vmalloc_head.vm_list),
+ *	.vm_start	= VMALLOC_START,
+ *	.vm_end		= VMALLOC_END,
+ *  };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vmregion_alloc().
+ */
+
+struct arm_vmregion *
+arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp)
+{
+	unsigned long addr = head->vm_start, end = head->vm_end - size;
+	unsigned long flags;
+	struct arm_vmregion *c, *new;
+
+	if (head->vm_end - head->vm_start < size) {
+		printk(KERN_WARNING "%s: allocation too big (requested %#x)\n",
+			__func__, size);
+		goto out;
+	}
+
+	new = kmalloc(sizeof(struct arm_vmregion), gfp);
+	if (!new)
+		goto out;
+
+	spin_lock_irqsave(&head->vm_lock, flags);
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if ((addr + size) < addr)
+			goto nospc;
+		if ((addr + size) <= c->vm_start)
+			goto found;
+		addr = c->vm_end;
+		if (addr > end)
+			goto nospc;
+	}
+
+ found:
+	/*
+	 * Insert this entry _before_ the one we found.
+	 */
+	list_add_tail(&new->vm_list, &c->vm_list);
+	new->vm_start = addr;
+	new->vm_end = addr + size;
+	new->vm_active = 1;
+
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+	return new;
+
+ nospc:
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+	kfree(new);
+ out:
+	return NULL;
+}
+
+static struct arm_vmregion *__arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+	struct arm_vmregion *c;
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if (c->vm_active && c->vm_start == addr)
+			goto out;
+	}
+	c = NULL;
+ out:
+	return c;
+}
+
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+	struct arm_vmregion *c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&head->vm_lock, flags);
+	c = __arm_vmregion_find(head, addr);
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+	return c;
+}
+
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *head, unsigned long addr)
+{
+	struct arm_vmregion *c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&head->vm_lock, flags);
+	c = __arm_vmregion_find(head, addr);
+	if (c)
+		c->vm_active = 0;
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+	return c;
+}
+
+void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&head->vm_lock, flags);
+	list_del(&c->vm_list);
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+
+	kfree(c);
+}
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
new file mode 100644
index 000000000000..6b2cdbdf3a85
--- /dev/null
+++ b/arch/arm/mm/vmregion.h
@@ -0,0 +1,29 @@
+#ifndef VMREGION_H
+#define VMREGION_H
+
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+struct page;
+
+struct arm_vmregion_head {
+	spinlock_t		vm_lock;
+	struct list_head	vm_list;
+	unsigned long		vm_start;
+	unsigned long		vm_end;
+};
+
+struct arm_vmregion {
+	struct list_head	vm_list;
+	unsigned long		vm_start;
+	unsigned long		vm_end;
+	struct page		*vm_pages;
+	int			vm_active;
+};
+
+struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, gfp_t);
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long);
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long);
+void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *);
+
+#endif
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 8da95d57c21f..6c8a02ad98e3 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -19,6 +19,8 @@
 #include <linux/init.h>
 #include <linux/timex.h>
 #include <linux/io.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
@@ -26,45 +28,136 @@
 #include <asm/mach/time.h>
 #include <mach/time.h>
 
+/*
+ * IOP clocksource (free-running timer 1).
+ */
+static cycle_t iop_clocksource_read(struct clocksource *unused)
+{
+	return 0xffffffffu - read_tcr1();
+}
+
+static struct clocksource iop_clocksource = {
+	.name 		= "iop_timer1",
+	.rating		= 300,
+	.read		= iop_clocksource_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init iop_clocksource_set_hz(struct clocksource *cs, unsigned int hz)
+{
+	u64 temp;
+	u32 shift;
+
+	/* Find shift and mult values for hz. */
+	shift = 32;
+	do {
+		temp = (u64) NSEC_PER_SEC << shift;
+		do_div(temp, hz);
+		if ((temp >> 32) == 0)
+			break;
+	} while (--shift != 0);
+
+	cs->shift = shift;
+	cs->mult = (u32) temp;
+
+	printk(KERN_INFO "clocksource: %s uses shift %u mult %#x\n",
+	       cs->name, cs->shift, cs->mult);
+}
+
+/*
+ * IOP sched_clock() implementation via its clocksource.
+ */
+unsigned long long sched_clock(void)
+{
+	cycle_t cyc = iop_clocksource_read(NULL);
+	struct clocksource *cs = &iop_clocksource;
+
+	return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+}
+
+/*
+ * IOP clockevents (interrupting timer 0).
+ */
+static int iop_set_next_event(unsigned long delta,
+			      struct clock_event_device *unused)
+{
+	u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1;
+
+	BUG_ON(delta == 0);
+	write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD));
+	write_tcr0(delta);
+	write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN);
+
+	return 0;
+}
+
 static unsigned long ticks_per_jiffy;
-static unsigned long ticks_per_usec;
-static unsigned long next_jiffy_time;
 
-unsigned long iop_gettimeoffset(void)
+static void iop_set_mode(enum clock_event_mode mode,
+			 struct clock_event_device *unused)
 {
-	unsigned long offset, temp;
+	u32 tmr = read_tmr0();
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		write_tmr0(tmr & ~IOP_TMR_EN);
+		write_tcr0(ticks_per_jiffy - 1);
+		tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* ->set_next_event sets period and enables timer */
+		tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		tmr |= IOP_TMR_EN;
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+	default:
+		tmr &= ~IOP_TMR_EN;
+		break;
+	}
 
-	/* enable cp6, if necessary, to avoid taking the overhead of an
-	 * undefined instruction trap
-	 */
-	asm volatile (
-	"mrc	p15, 0, %0, c15, c1, 0\n\t"
-	"tst	%0, #(1 << 6)\n\t"
-	"orreq	%0, %0, #(1 << 6)\n\t"
-	"mcreq	p15, 0, %0, c15, c1, 0\n\t"
-#ifdef CONFIG_CPU_XSCALE
-	"mrceq	p15, 0, %0, c15, c1, 0\n\t"
-	"moveq	%0, %0\n\t"
-	"subeq	pc, pc, #4\n\t"
-#endif
-	: "=r"(temp) : : "cc");
-
-	offset = next_jiffy_time - read_tcr1();
-
-	return offset / ticks_per_usec;
+	write_tmr0(tmr);
+}
+
+static struct clock_event_device iop_clockevent = {
+	.name		= "iop_timer0",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.rating         = 300,
+	.set_next_event	= iop_set_next_event,
+	.set_mode	= iop_set_mode,
+};
+
+static void __init iop_clockevent_set_hz(struct clock_event_device *ce, unsigned int hz)
+{
+	u64 temp;
+	u32 shift;
+
+	/* Find shift and mult values for hz. */
+	shift = 32;
+	do {
+		temp = (u64) hz << shift;
+		do_div(temp, NSEC_PER_SEC);
+		if ((temp >> 32) == 0)
+			break;
+	} while (--shift != 0);
+
+	ce->shift = shift;
+	ce->mult = (u32) temp;
+
+	printk(KERN_INFO "clockevent: %s uses shift %u mult %#lx\n",
+	       ce->name, ce->shift, ce->mult);
 }
 
 static irqreturn_t
 iop_timer_interrupt(int irq, void *dev_id)
 {
-	write_tisr(1);
-
-	while ((signed long)(next_jiffy_time - read_tcr1())
-		>= ticks_per_jiffy) {
-		timer_tick();
-		next_jiffy_time -= ticks_per_jiffy;
-	}
+	struct clock_event_device *evt = dev_id;
 
+	write_tisr(1);
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
@@ -72,6 +165,7 @@ static struct irqaction iop_timer_irq = {
 	.name		= "IOP Timer Tick",
 	.handler	= iop_timer_interrupt,
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.dev_id		= &iop_clockevent,
 };
 
 static unsigned long iop_tick_rate;
@@ -86,21 +180,33 @@ void __init iop_init_time(unsigned long tick_rate)
 	u32 timer_ctl;
 
 	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
-	ticks_per_usec = tick_rate / 1000000;
-	next_jiffy_time = 0xffffffff;
 	iop_tick_rate = tick_rate;
 
 	timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED |
 			IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1;
 
 	/*
-	 * We use timer 0 for our timer interrupt, and timer 1 as
-	 * monotonic counter for tracking missed jiffies.
+	 * Set up interrupting clockevent timer 0.
 	 */
+	write_tmr0(timer_ctl & ~IOP_TMR_EN);
+	setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
+	iop_clockevent_set_hz(&iop_clockevent, tick_rate);
+	iop_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xfffffffe, &iop_clockevent);
+	iop_clockevent.min_delta_ns =
+		clockevent_delta2ns(0xf, &iop_clockevent);
+	iop_clockevent.cpumask = cpumask_of(0);
+	clockevents_register_device(&iop_clockevent);
 	write_trr0(ticks_per_jiffy - 1);
+	write_tcr0(ticks_per_jiffy - 1);
 	write_tmr0(timer_ctl);
+
+	/*
+	 * Set up free-running clocksource timer 1.
+	 */
 	write_trr1(0xffffffff);
+	write_tcr1(0xffffffff);
 	write_tmr1(timer_ctl);
-
-	setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
+	iop_clocksource_set_hz(&iop_clocksource, tick_rate);
+	clocksource_register(&iop_clocksource);
 }
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index ca5c7c226341..8b0a1ee039fa 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -69,10 +69,20 @@ config MXC_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
 
+config MXC_ULPI
+	bool
+
 config ARCH_HAS_RNGA
 	bool
 	depends on ARCH_MXC
 
 config ARCH_MXC_IOMUX_V3
 	bool
+
+config ARCH_MXC_AUDMUX_V1
+	bool
+
+config ARCH_MXC_AUDMUX_V2
+	bool
+
 endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index e3212c8ff421..996cbac6932c 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -9,3 +9,7 @@ obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
+obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
+obj-$(CONFIG_MXC_ULPI) += ulpi.o
+obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
+obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
new file mode 100644
index 000000000000..da6387dcdf21
--- /dev/null
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <mach/audmux.h>
+#include <mach/hardware.h>
+
+static void __iomem *audmux_base;
+
+static unsigned char port_mapping[] = {
+	0x0, 0x4, 0x8, 0x10, 0x14, 0x1c,
+};
+
+int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr)
+{
+	if (!audmux_base) {
+		printk("%s: not configured\n", __func__);
+		return -ENOSYS;
+	}
+
+	if (port >= ARRAY_SIZE(port_mapping))
+		return -EINVAL;
+
+	writel(pcr, audmux_base + port_mapping[port]);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port);
+
+static int mxc_audmux_v1_init(void)
+{
+	if (cpu_is_mx27() || cpu_is_mx21())
+		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+	return 0;
+}
+
+postcore_initcall(mxc_audmux_v1_init);
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
new file mode 100644
index 000000000000..6f21096086fd
--- /dev/null
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <mach/audmux.h>
+#include <mach/hardware.h>
+
+static struct clk *audmux_clk;
+static void __iomem *audmux_base;
+
+#define MXC_AUDMUX_V2_PTCR(x)		((x) * 8)
+#define MXC_AUDMUX_V2_PDCR(x)		((x) * 8 + 4)
+
+int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+		unsigned int pdcr)
+{
+	if (!audmux_base)
+		return -ENOSYS;
+
+	if (audmux_clk)
+		clk_enable(audmux_clk);
+
+	writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port));
+	writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+	if (audmux_clk)
+		clk_disable(audmux_clk);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port);
+
+static int mxc_audmux_v2_init(void)
+{
+	int ret;
+
+	if (cpu_is_mx35()) {
+		audmux_clk = clk_get(NULL, "audmux");
+		if (IS_ERR(audmux_clk)) {
+			ret = PTR_ERR(audmux_clk);
+			printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
+					ret);
+			return ret;
+		}
+	}
+
+	if (cpu_is_mx31() || cpu_is_mx35())
+		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+
+	return 0;
+}
+
+postcore_initcall(mxc_audmux_v2_init);
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 77646436c00e..9c1b3f9c4f4d 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -156,7 +156,8 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
 	}
 
 	now = min(imxdma->resbytes, sg->length);
-	imxdma->resbytes -= now;
+	if (imxdma->resbytes != IMX_DMA_LENGTH_LOOP)
+		imxdma->resbytes -= now;
 
 	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
 		__raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel));
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
new file mode 100644
index 000000000000..41599be882e8
--- /dev/null
+++ b/arch/arm/plat-mxc/ehci.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX31_OTG_SIC_SHIFT	29
+#define MX31_OTG_SIC_MASK	(0xf << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_PM_BIT		(1 << 24)
+
+#define MX31_H2_SIC_SHIFT	21
+#define MX31_H2_SIC_MASK	(0xf << MX31_H2_SIC_SHIFT)
+#define MX31_H2_PM_BIT		(1 << 16)
+#define MX31_H2_DT_BIT		(1 << 5)
+
+#define MX31_H1_SIC_SHIFT	13
+#define MX31_H1_SIC_MASK	(0xf << MX31_H1_SIC_SHIFT)
+#define MX31_H1_PM_BIT		(1 << 8)
+#define MX31_H1_DT_BIT		(1 << 4)
+
+int mxc_set_usbcontrol(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	if (cpu_is_mx31()) {
+		v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX31_OTG_SIC_SHIFT;
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v |= MX31_OTG_PM_BIT;
+
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H1_SIC_SHIFT;
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v |= MX31_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H1_DT_BIT;
+
+			break;
+		case 2:	/* H2 port */
+			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H2_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_H2_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H2_DT_BIT;
+
+			break;
+		}
+
+		writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		return 0;
+	}
+
+	printk(KERN_WARNING
+		"%s() unable to setup USBCONTROL for this CPU\n", __func__);
+	return -EINVAL;
+}
+EXPORT_SYMBOL(mxc_set_usbcontrol);
+
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index cfc4a8b43e6a..d65ebe303b9f 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -282,7 +282,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		for (j = port[i].virtual_irq_start;
 			j < port[i].virtual_irq_start + 32; j++) {
 			set_irq_chip(j, &gpio_irq_chip);
-			set_irq_handler(j, handle_edge_irq);
+			set_irq_handler(j, handle_level_irq);
 			set_irq_flags(j, IRQF_VALID);
 		}
 
diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h
new file mode 100644
index 000000000000..5cd6466964af
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/audmux.h
@@ -0,0 +1,52 @@
+#ifndef __MACH_AUDMUX_H
+#define __MACH_AUDMUX_H
+
+#define MX27_AUDMUX_HPCR1_SSI0		0
+#define MX27_AUDMUX_HPCR2_SSI1		1
+#define MX27_AUDMUX_HPCR3_SSI_PINS_4	2
+#define MX27_AUDMUX_PPCR1_SSI_PINS_1	3
+#define MX27_AUDMUX_PPCR2_SSI_PINS_2	4
+#define MX27_AUDMUX_PPCR3_SSI_PINS_3	5
+
+#define MX31_AUDMUX_PORT1_SSI0		0
+#define MX31_AUDMUX_PORT2_SSI1		1
+#define MX31_AUDMUX_PORT3_SSI_PINS_3	2
+#define MX31_AUDMUX_PORT4_SSI_PINS_4	3
+#define MX31_AUDMUX_PORT5_SSI_PINS_5	4
+#define MX31_AUDMUX_PORT6_SSI_PINS_6	5
+
+/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */
+#define MXC_AUDMUX_V1_PCR_INMMASK(x)	((x) & 0xff)
+#define MXC_AUDMUX_V1_PCR_INMEN		(1 << 8)
+#define MXC_AUDMUX_V1_PCR_TXRXEN	(1 << 10)
+#define MXC_AUDMUX_V1_PCR_SYN		(1 << 12)
+#define MXC_AUDMUX_V1_PCR_RXDSEL(x)	(((x) & 0x7) << 13)
+#define MXC_AUDMUX_V1_PCR_RFCSEL(x)	(((x) & 0xf) << 20)
+#define MXC_AUDMUX_V1_PCR_RCLKDIR	(1 << 24)
+#define MXC_AUDMUX_V1_PCR_RFSDIR	(1 << 25)
+#define MXC_AUDMUX_V1_PCR_TFCSEL(x)	(((x) & 0xf) << 26)
+#define MXC_AUDMUX_V1_PCR_TCLKDIR	(1 << 30)
+#define MXC_AUDMUX_V1_PCR_TFSDIR	(1 << 31)
+
+/* Register definitions for the i.MX25/31/35 Digital Audio Multiplexer */
+#define MXC_AUDMUX_V2_PTCR_TFSDIR	(1 << 31)
+#define MXC_AUDMUX_V2_PTCR_TFSEL(x)	(((x) & 0xf) << 27)
+#define MXC_AUDMUX_V2_PTCR_TCLKDIR	(1 << 26)
+#define MXC_AUDMUX_V2_PTCR_TCSEL(x)	(((x) & 0xf) << 22)
+#define MXC_AUDMUX_V2_PTCR_RFSDIR	(1 << 21)
+#define MXC_AUDMUX_V2_PTCR_RFSEL(x)	(((x) & 0xf) << 17)
+#define MXC_AUDMUX_V2_PTCR_RCLKDIR	(1 << 16)
+#define MXC_AUDMUX_V2_PTCR_RCSEL(x)	(((x) & 0xf) << 12)
+#define MXC_AUDMUX_V2_PTCR_SYN		(1 << 11)
+
+#define MXC_AUDMUX_V2_PDCR_RXDSEL(x)	(((x) & 0x7) << 13)
+#define MXC_AUDMUX_V2_PDCR_TXRXEN	(1 << 12)
+#define MXC_AUDMUX_V2_PDCR_MODE(x)	(((x) & 0x3) << 8)
+#define MXC_AUDMUX_V2_PDCR_INMMASK(x)	((x) & 0xff)
+
+int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr);
+
+int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+		unsigned int pdcr);
+
+#endif /* __MACH_AUDMUX_H */
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
new file mode 100644
index 000000000000..05ff2f31ef1f
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
@@ -0,0 +1,39 @@
+/*
+ *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H
+#define __ARM_ARCH_BOARD_KZM_ARM11_H
+
+/*
+ *  KZM-ARM11-01 Board Control Registers on FPGA
+ */
+#define KZM_ARM11_CTL1		(CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2		(CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1		(CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT	(CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV	(CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED	(CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS		(CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2	(CS4_BASE_ADDR + 0x1003)
+
+/*
+ * External UART for touch panel on FPGA
+ */
+#define KZM_ARM11_16550		(CS4_BASE_ADDR + 0x1050)
+
+#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 8e64325d6905..0184b638c268 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -1,15 +1,42 @@
 /*
  * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ *   Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
  */
 
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+
+#ifndef __ASSEMBLY__
+
+enum mx31lilly_boards {
+	MX31LITE_NOBOARD	= 0,
+	MX31LITE_DB		= 1,
+};
+
 /*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
  */
 
-#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+extern void mx31lite_db_init(void);
 
-#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
+#endif
 
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
index b3876cc238ca..07be8ad7ec37 100644
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
@@ -58,6 +58,14 @@ imx_dma_setup_single(int channel, dma_addr_t dma_address,
 		unsigned int dma_length, unsigned int dev_addr,
 		unsigned int dmamode);
 
+
+/*
+ * Use this flag as the dma_length argument to imx_dma_setup_sg()
+ * to create an endless running dma loop. The end of the scatterlist
+ * must be linked to the beginning for this to work.
+ */
+#define IMX_DMA_LENGTH_LOOP	((unsigned int)-1)
+
 int
 imx_dma_setup_sg(int channel, struct scatterlist *sg,
 		unsigned int sgcount, unsigned int dma_length,
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 446f86763816..e1fc6da1cd10 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -112,7 +112,7 @@ enum iomux_gp_func {
  * setups a single pin:
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
- * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
 int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
 /*
@@ -524,10 +524,18 @@ enum iomux_pins {
 #define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RXD1__RXD1		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DCE1__DCD_DCE1	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RI_DCE1__RI_DCE1	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DSR_DCE1__DSR_DCE1	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DTR_DCE1__DTR_DCE1	IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CTS2__CTS2		IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RTS2__RTS2		IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD2__TXD2		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RXD2__RXD2		IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__DCD_DTE2	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_RI_DTE1__RI_DTE2	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_DSR_DTE1__DSR_DTE2	IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_DTR_DTE1__DTR_DTE2	IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_OCONFIG_ALT3 | IOMUX_ICONFIG_NONE)
 #define MX31_PIN_PC_RST__CTS5		IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_PC_VS2__RTS5		IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_PC_BVD2__TXD5		IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2)
@@ -623,6 +631,8 @@ enum iomux_pins {
 #define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__GPIO3_4	IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D5__GPIO3_5	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0    IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1    IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2    IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
@@ -642,12 +652,22 @@ enum iomux_pins {
 #define MX31_PIN_CSPI1_SS2__USBH1_RCV          IOMUX_MODE(MX31_PIN_CSPI1_SS2,  IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI1_SCLK__USBH1_OEB         IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS       IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_SFS6__USBH1_SUSPEND	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_NFRE_B__GPIO1_11	IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_NFALE__GPIO1_12	IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USBH2_DATA0__USBH2_DATA0      IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_DATA1__USBH2_DATA1      IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD3__USBH2_DATA2	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD3__USBH2_DATA3	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK3__USBH2_DATA4	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS3__USBH2_DATA5	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD6__USBH2_DATA6	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD6__USBH2_DATA7	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_CLK__USBH2_CLK          IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_DIR__USBH2_DIR          IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_NXT__USBH2_NXT          IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_STP__USBH2_STP          IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK6__GPIO1_25		IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
@@ -693,7 +713,19 @@ enum iomux_pins {
 #define MX31_PIN_DCD_DCE1__GPIO2_11	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_STXD5__GPIO1_21       IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_SRXD5__GPIO1_22       IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
-
+#define MX31_PIN_GPIO1_3__GPIO1_3	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSPI2_SS1__CSPI3_SS1	IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_RTS1__GPIO2_6		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CTS1__GPIO2_7		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_LCS0__GPIO3_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD4__STXD4		IOMUX_MODE(MX31_PIN_STXD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD4__SRXD4		IOMUX_MODE(MX31_PIN_SRXD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK4__SCK4		IOMUX_MODE(MX31_PIN_SCK4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS4__SFS4		IOMUX_MODE(MX31_PIN_SFS4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD5__STXD5		IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD5__SRXD5		IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK5__SCK5		IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS5__SFS5		IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
index 9f13061192c8..3887f3fe29d4 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -48,7 +48,7 @@
  * setups a single pin:
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
- * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
 int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
 /*
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index a0fa40265468..1deda0184892 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -88,9 +88,7 @@ struct pad_desc {
 #define PAD_CTL_SRE_FAST		(1 << 0)
 
 /*
- * setups a single pad:
- * 	- reserves the pad so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
+ * setups a single pad in the iomuxer
  */
 int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
 
@@ -101,19 +99,6 @@ int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
 int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
 
 /*
- * releases a single pad:
- * 	- make it available for a future use by another driver
- * 	- DOES NOT reconfigure the IOMUX in its reset state
- */
-void mxc_iomux_v3_release_pad(struct pad_desc *pad);
-
-/*
- * releases multiple pads
- * convenvient way to call the above function with tables
- */
-void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
-
-/*
  * Initialise the iomux controller
  */
 void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 6d49f8ae3259..011cfcd8b820 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -123,6 +123,7 @@
 #define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
 #define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
 #define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
+#define IRQ_GPIOF(x)  (IRQ_GPIOE(32) + x)
 
 
 extern void mxc_gpio_mode(int gpio_mode);
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 21112c695ec5..bb297d8765a7 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -25,46 +25,191 @@
 #ifndef __ASM_ARCH_MXC_MX21_H__
 #define __ASM_ARCH_MXC_MX21_H__
 
+#define MX21_AIPI_BASE_ADDR		0x10000000
+#define MX21_AIPI_BASE_ADDR_VIRT	0xf4000000
+#define MX21_AIPI_SIZE			SZ_1M
+#define MX21_DMA_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x01000)
+#define MX21_WDOG_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x02000)
+#define MX21_GPT1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x03000)
+#define MX21_GPT2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x04000)
+#define MX21_GPT3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x05000)
+#define MX21_PWM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x06000)
+#define MX21_RTC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x07000)
+#define MX21_KPP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x08000)
+#define MX21_OWIRE_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x09000)
+#define MX21_UART1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0a000)
+#define MX21_UART2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0b000)
+#define MX21_UART3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0c000)
+#define MX21_UART4_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0d000)
+#define MX21_CSPI1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0e000)
+#define MX21_CSPI2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0f000)
+#define MX21_SSI1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x10000)
+#define MX21_SSI2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x11000)
+#define MX21_I2C_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x12000)
+#define MX21_SDHC1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x13000)
+#define MX21_SDHC2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x14000)
+#define MX21_GPIO_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x15000)
+#define MX21_AUDMUX_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x16000)
+#define MX21_CSPI3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x17000)
+#define MX21_LCDC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x21000)
+#define MX21_SLCDC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x22000)
+#define MX21_USBOTG_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x24000)
+#define MX21_EMMA_PP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x26000)
+#define MX21_EMMA_PRP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x26400)
+#define MX21_CCM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x27000)
+#define MX21_SYSCTRL_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x27800)
+#define MX21_JAM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x3e000)
+#define MX21_MAX_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x3f000)
+
+#define MX21_AVIC_BASE_ADDR		0x10040000
+
+#define MX21_SAHB1_BASE_ADDR		0x80000000
+#define MX21_SAHB1_BASE_ADDR_VIRT	0xf4100000
+#define MX21_SAHB1_SIZE			SZ_1M
+#define MX21_CSI_BASE_ADDR			(MX2x_SAHB1_BASE_ADDR + 0x0000)
+
 /* Memory regions and CS */
-#define SDRAM_BASE_ADDR         0xC0000000
-#define CSD1_BASE_ADDR          0xC4000000
+#define MX21_SDRAM_BASE_ADDR		0xc0000000
+#define MX21_CSD1_BASE_ADDR		0xc4000000
 
-#define CS0_BASE_ADDR           0xC8000000
-#define CS1_BASE_ADDR           0xCC000000
-#define CS2_BASE_ADDR           0xD0000000
-#define CS3_BASE_ADDR           0xD1000000
-#define CS4_BASE_ADDR           0xD2000000
-#define CS5_BASE_ADDR           0xDD000000
-#define PCMCIA_MEM_BASE_ADDR    0xD4000000
+#define MX21_CS0_BASE_ADDR		0xc8000000
+#define MX21_CS1_BASE_ADDR		0xcc000000
+#define MX21_CS2_BASE_ADDR		0xd0000000
+#define MX21_CS3_BASE_ADDR		0xd1000000
+#define MX21_CS4_BASE_ADDR		0xd2000000
+#define MX21_PCMCIA_MEM_BASE_ADDR	0xd4000000
+#define MX21_CS5_BASE_ADDR		0xdd000000
 
 /* NAND, SDRAM, WEIM etc controllers */
-#define X_MEMC_BASE_ADDR        0xDF000000
-#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
-#define X_MEMC_SIZE             SZ_256K
+#define MX21_X_MEMC_BASE_ADDR		0xdf000000
+#define MX21_X_MEMC_BASE_ADDR_VIRT	0xf4200000
+#define MX21_X_MEMC_SIZE		SZ_256K
 
-#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x0000)
-#define EIM_BASE_ADDR           (X_MEMC_BASE_ADDR + 0x1000)
-#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x2000)
-#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR + 0x3000)
+#define MX21_SDRAMC_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x0000)
+#define MX21_EIM_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x1000)
+#define MX21_PCMCIA_CTL_BASE_ADDR	(MX21_X_MEMC_BASE_ADDR + 0x2000)
+#define MX21_NFC_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x3000)
 
-#define IRAM_BASE_ADDR          0xFFFFE800	/* internal ram */
+#define MX21_IRAM_BASE_ADDR		0xffffe800	/* internal ram */
 
 /* fixed interrupt numbers */
-#define MXC_INT_USBCTRL         58
-#define MXC_INT_USBCTRL         58
-#define MXC_INT_USBMNP          57
-#define MXC_INT_USBFUNC         56
-#define MXC_INT_USBHOST         55
-#define MXC_INT_USBDMA          54
-#define MXC_INT_USBWKUP         53
-#define MXC_INT_EMMADEC         50
-#define MXC_INT_EMMAENC         49
-#define MXC_INT_BMI             30
-#define MXC_INT_FIRI            9
+#define MX21_INT_CSPI3		6
+#define MX21_INT_GPIO		8
+#define MX21_INT_FIRI		9
+#define MX21_INT_SDHC2		10
+#define MX21_INT_SDHC1		11
+#define MX21_INT_I2C		12
+#define MX21_INT_SSI2		13
+#define MX21_INT_SSI1		14
+#define MX21_INT_CSPI2		15
+#define MX21_INT_CSPI1		16
+#define MX21_INT_UART4		17
+#define MX21_INT_UART3		18
+#define MX21_INT_UART2		19
+#define MX21_INT_UART1		20
+#define MX21_INT_KPP		21
+#define MX21_INT_RTC		22
+#define MX21_INT_PWM		23
+#define MX21_INT_GPT3		24
+#define MX21_INT_GPT2		25
+#define MX21_INT_GPT1		26
+#define MX21_INT_WDOG		27
+#define MX21_INT_PCMCIA		28
+#define MX21_INT_NANDFC		29
+#define MX21_INT_BMI		30
+#define MX21_INT_CSI		31
+#define MX21_INT_DMACH0		32
+#define MX21_INT_DMACH1		33
+#define MX21_INT_DMACH2		34
+#define MX21_INT_DMACH3		35
+#define MX21_INT_DMACH4		36
+#define MX21_INT_DMACH5		37
+#define MX21_INT_DMACH6		38
+#define MX21_INT_DMACH7		39
+#define MX21_INT_DMACH8		40
+#define MX21_INT_DMACH9		41
+#define MX21_INT_DMACH10	42
+#define MX21_INT_DMACH11	43
+#define MX21_INT_DMACH12	44
+#define MX21_INT_DMACH13	45
+#define MX21_INT_DMACH14	46
+#define MX21_INT_DMACH15	47
+#define MX21_INT_EMMAENC	49
+#define MX21_INT_EMMADEC	50
+#define MX21_INT_EMMAPRP	51
+#define MX21_INT_EMMAPP		52
+#define MX21_INT_USBWKUP	53
+#define MX21_INT_USBDMA		54
+#define MX21_INT_USBHOST	55
+#define MX21_INT_USBFUNC	56
+#define MX21_INT_USBMNP		57
+#define MX21_INT_USBCTRL	58
+#define MX21_INT_SLCDC		60
+#define MX21_INT_LCDC		61
 
 /* fixed DMA request numbers */
-#define DMA_REQ_BMI_RX          29
-#define DMA_REQ_BMI_TX          28
-#define DMA_REQ_FIRI_RX         4
+#define MX21_DMA_REQ_CSPI3_RX	1
+#define MX21_DMA_REQ_CSPI3_TX	2
+#define MX21_DMA_REQ_EXT	3
+#define MX21_DMA_REQ_FIRI_RX	4
+#define MX21_DMA_REQ_SDHC2	6
+#define MX21_DMA_REQ_SDHC1	7
+#define MX21_DMA_REQ_SSI2_RX0	8
+#define MX21_DMA_REQ_SSI2_TX0	9
+#define MX21_DMA_REQ_SSI2_RX1	10
+#define MX21_DMA_REQ_SSI2_TX1	11
+#define MX21_DMA_REQ_SSI1_RX0	12
+#define MX21_DMA_REQ_SSI1_TX0	13
+#define MX21_DMA_REQ_SSI1_RX1	14
+#define MX21_DMA_REQ_SSI1_TX1	15
+#define MX21_DMA_REQ_CSPI2_RX	16
+#define MX21_DMA_REQ_CSPI2_TX	17
+#define MX21_DMA_REQ_CSPI1_RX	18
+#define MX21_DMA_REQ_CSPI1_TX	19
+#define MX21_DMA_REQ_UART4_RX	20
+#define MX21_DMA_REQ_UART4_TX	21
+#define MX21_DMA_REQ_UART3_RX	22
+#define MX21_DMA_REQ_UART3_TX	23
+#define MX21_DMA_REQ_UART2_RX	24
+#define MX21_DMA_REQ_UART2_TX	25
+#define MX21_DMA_REQ_UART1_RX	26
+#define MX21_DMA_REQ_UART1_TX	27
+#define MX21_DMA_REQ_BMI_TX	28
+#define MX21_DMA_REQ_BMI_RX	29
+#define MX21_DMA_REQ_CSI_STAT	30
+#define MX21_DMA_REQ_CSI_RX	31
+
+/* these should go away */
+#define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
+#define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX21_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX21_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX21_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX21_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX21_CS4_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX21_PCMCIA_MEM_BASE_ADDR
+#define CS5_BASE_ADDR MX21_CS5_BASE_ADDR
+#define X_MEMC_BASE_ADDR MX21_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX21_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX21_X_MEMC_SIZE
+#define SDRAMC_BASE_ADDR MX21_SDRAMC_BASE_ADDR
+#define EIM_BASE_ADDR MX21_EIM_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX21_PCMCIA_CTL_BASE_ADDR
+#define NFC_BASE_ADDR MX21_NFC_BASE_ADDR
+#define IRAM_BASE_ADDR MX21_IRAM_BASE_ADDR
+#define MXC_INT_FIRI MX21_INT_FIRI
+#define MXC_INT_BMI MX21_INT_BMI
+#define MXC_INT_EMMAENC MX21_INT_EMMAENC
+#define MXC_INT_EMMADEC MX21_INT_EMMADEC
+#define MXC_INT_USBWKUP MX21_INT_USBWKUP
+#define MXC_INT_USBDMA MX21_INT_USBDMA
+#define MXC_INT_USBHOST MX21_INT_USBHOST
+#define MXC_INT_USBFUNC MX21_INT_USBFUNC
+#define MXC_INT_USBMNP MX21_INT_USBMNP
+#define MXC_INT_USBCTRL MX21_INT_USBCTRL
+#define MXC_INT_USBCTRL MX21_INT_USBCTRL
+#define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
+#define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
+#define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
 
 #endif /* __ASM_ARCH_MXC_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index ec64bd9a8ab1..91e738144804 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -1,14 +1,14 @@
 #ifndef __MACH_MX25_H__
 #define __MACH_MX25_H__
 
-#define MX25_AIPS1_BASE_ADDR		0x43F00000
-#define MX25_AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define MX25_AIPS1_BASE_ADDR		0x43f00000
+#define MX25_AIPS1_BASE_ADDR_VIRT	0xfc000000
 #define MX25_AIPS1_SIZE			SZ_1M
-#define MX25_AIPS2_BASE_ADDR		0x53F00000
-#define MX25_AIPS2_BASE_ADDR_VIRT	0xFC200000
+#define MX25_AIPS2_BASE_ADDR		0x53f00000
+#define MX25_AIPS2_BASE_ADDR_VIRT	0xfc200000
 #define MX25_AIPS2_SIZE			SZ_1M
 #define MX25_AVIC_BASE_ADDR		0x68000000
-#define MX25_AVIC_BASE_ADDR_VIRT	0xFC400000
+#define MX25_AVIC_BASE_ADDR_VIRT	0xfc400000
 #define MX25_AVIC_SIZE			SZ_1M
 
 #define MX25_IOMUXC_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xac000)
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index dc3ad9aa952a..e2ae19f51710 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,87 +24,198 @@
 #ifndef __ASM_ARCH_MXC_MX27_H__
 #define __ASM_ARCH_MXC_MX27_H__
 
-/* IRAM */
-#define IRAM_BASE_ADDR          0xFFFF4C00	/* internal ram */
-
-#define MSHC_BASE_ADDR          (AIPI_BASE_ADDR + 0x18000)
-#define GPT5_BASE_ADDR          (AIPI_BASE_ADDR + 0x19000)
-#define GPT4_BASE_ADDR          (AIPI_BASE_ADDR + 0x1A000)
-#define UART5_BASE_ADDR         (AIPI_BASE_ADDR + 0x1B000)
-#define UART6_BASE_ADDR         (AIPI_BASE_ADDR + 0x1C000)
-#define I2C2_BASE_ADDR          (AIPI_BASE_ADDR + 0x1D000)
-#define SDHC3_BASE_ADDR         (AIPI_BASE_ADDR + 0x1E000)
-#define GPT6_BASE_ADDR          (AIPI_BASE_ADDR + 0x1F000)
-#define VPU_BASE_ADDR           (AIPI_BASE_ADDR + 0x23000)
-#define OTG_BASE_ADDR           USBOTG_BASE_ADDR
-#define SAHARA_BASE_ADDR        (AIPI_BASE_ADDR + 0x25000)
-#define IIM_BASE_ADDR           (AIPI_BASE_ADDR + 0x28000)
-#define RTIC_BASE_ADDR          (AIPI_BASE_ADDR + 0x2A000)
-#define FEC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2B000)
-#define SCC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2C000)
-#define ETB_BASE_ADDR           (AIPI_BASE_ADDR + 0x3B000)
-#define ETB_RAM_BASE_ADDR       (AIPI_BASE_ADDR + 0x3C000)
+#define MX27_AIPI_BASE_ADDR		0x10000000
+#define MX27_AIPI_BASE_ADDR_VIRT	0xf4000000
+#define MX27_AIPI_SIZE			SZ_1M
+#define MX27_DMA_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x01000)
+#define MX27_WDOG_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x02000)
+#define MX27_GPT1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x03000)
+#define MX27_GPT2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x04000)
+#define MX27_GPT3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x05000)
+#define MX27_PWM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x06000)
+#define MX27_RTC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x07000)
+#define MX27_KPP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x08000)
+#define MX27_OWIRE_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x09000)
+#define MX27_UART1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0a000)
+#define MX27_UART2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0b000)
+#define MX27_UART3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0c000)
+#define MX27_UART4_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0d000)
+#define MX27_CSPI1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0e000)
+#define MX27_CSPI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0f000)
+#define MX27_SSI1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x10000)
+#define MX27_SSI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x11000)
+#define MX27_I2C_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x12000)
+#define MX27_SDHC1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x13000)
+#define MX27_SDHC2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x14000)
+#define MX27_GPIO_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x15000)
+#define MX27_AUDMUX_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x16000)
+#define MX27_CSPI3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x17000)
+#define MX27_MSHC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x18000)
+#define MX27_GPT5_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x19000)
+#define MX27_GPT4_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1a000)
+#define MX27_UART5_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1b000)
+#define MX27_UART6_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1c000)
+#define MX27_I2C2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1d000)
+#define MX27_SDHC3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1e000)
+#define MX27_GPT6_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1f000)
+#define MX27_LCDC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x21000)
+#define MX27_SLCDC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x22000)
+#define MX27_VPU_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x23000)
+#define MX27_USBOTG_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x24000)
+#define MX27_OTG_BASE_ADDR			MX27_USBOTG_BASE_ADDR
+#define MX27_SAHARA_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x25000)
+#define MX27_EMMA_PP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26000)
+#define MX27_EMMA_PRP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26400)
+#define MX27_CCM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x27000)
+#define MX27_SYSCTRL_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x27800)
+#define MX27_IIM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x28000)
+#define MX27_RTIC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2a000)
+#define MX27_FEC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2b000)
+#define MX27_SCC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2c000)
+#define MX27_ETB_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3b000)
+#define MX27_ETB_RAM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3c000)
+#define MX27_JAM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3e000)
+#define MX27_MAX_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3f000)
+
+#define MX27_AVIC_BASE_ADDR		0x10040000
 
 /* ROM patch */
-#define ROMP_BASE_ADDR          0x10041000
+#define MX27_ROMP_BASE_ADDR		0x10041000
 
-#define ATA_BASE_ADDR           (SAHB1_BASE_ADDR + 0x1000)
+#define MX27_SAHB1_BASE_ADDR		0x80000000
+#define MX27_SAHB1_BASE_ADDR_VIRT	0xf4100000
+#define MX27_SAHB1_SIZE			SZ_1M
+#define MX27_CSI_BASE_ADDR			(MX27_SAHB1_BASE_ADDR + 0x0000)
+#define MX27_ATA_BASE_ADDR			(MX27_SAHB1_BASE_ADDR + 0x1000)
 
 /* Memory regions and CS */
-#define SDRAM_BASE_ADDR         0xA0000000
-#define CSD1_BASE_ADDR          0xB0000000
+#define MX27_SDRAM_BASE_ADDR		0xa0000000
+#define MX27_CSD1_BASE_ADDR		0xb0000000
 
-#define CS0_BASE_ADDR           0xC0000000
-#define CS1_BASE_ADDR           0xC8000000
-#define CS2_BASE_ADDR           0xD0000000
-#define CS3_BASE_ADDR           0xD2000000
-#define CS4_BASE_ADDR           0xD4000000
-#define CS5_BASE_ADDR           0xD6000000
-#define PCMCIA_MEM_BASE_ADDR    0xDC000000
+#define MX27_CS0_BASE_ADDR		0xc0000000
+#define MX27_CS1_BASE_ADDR		0xc8000000
+#define MX27_CS2_BASE_ADDR		0xd0000000
+#define MX27_CS3_BASE_ADDR		0xd2000000
+#define MX27_CS4_BASE_ADDR		0xd4000000
+#define MX27_CS5_BASE_ADDR		0xd6000000
 
 /* NAND, SDRAM, WEIM, M3IF, EMI controllers */
-#define X_MEMC_BASE_ADDR        0xD8000000
-#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
-#define X_MEMC_SIZE             SZ_1M
+#define MX27_X_MEMC_BASE_ADDR		0xd8000000
+#define MX27_X_MEMC_BASE_ADDR_VIRT	0xf4200000
+#define MX27_X_MEMC_SIZE		SZ_1M
+#define MX27_NFC_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR)
+#define MX27_SDRAMC_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x1000)
+#define MX27_WEIM_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x2000)
+#define MX27_M3IF_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x3000)
+#define MX27_PCMCIA_CTL_BASE_ADDR		(MX27_X_MEMC_BASE_ADDR + 0x4000)
 
-#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR)
-#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x3000)
-#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x4000)
+#define MX27_PCMCIA_MEM_BASE_ADDR	0xdc000000
+
+/* IRAM */
+#define MX27_IRAM_BASE_ADDR		0xffff4c00	/* internal ram */
 
 /* fixed interrupt numbers */
-#define MXC_INT_CCM		63
-#define MXC_INT_IIM		62
-#define MXC_INT_SAHARA		59
-#define MXC_INT_SCC_SCM		58
-#define MXC_INT_SCC_SMN		57
-#define MXC_INT_USB3		56
-#define MXC_INT_USB2		55
-#define MXC_INT_USB1		54
-#define MXC_INT_VPU		53
-#define MXC_INT_FEC		50
-#define MXC_INT_UART5		49
-#define MXC_INT_UART6		48
-#define MXC_INT_ATA		30
-#define MXC_INT_SDHC3		9
-#define MXC_INT_SDHC		7
-#define MXC_INT_RTIC		5
-#define MXC_INT_GPT4		4
-#define MXC_INT_GPT5		3
-#define MXC_INT_GPT6		2
-#define MXC_INT_I2C2		1
+#define MX27_INT_I2C2		1
+#define MX27_INT_GPT6		2
+#define MX27_INT_GPT5		3
+#define MX27_INT_GPT4		4
+#define MX27_INT_RTIC		5
+#define MX27_INT_CSPI3		6
+#define MX27_INT_SDHC		7
+#define MX27_INT_GPIO		8
+#define MX27_INT_SDHC3		9
+#define MX27_INT_SDHC2		10
+#define MX27_INT_SDHC1		11
+#define MX27_INT_I2C		12
+#define MX27_INT_SSI2		13
+#define MX27_INT_SSI1		14
+#define MX27_INT_CSPI2		15
+#define MX27_INT_CSPI1		16
+#define MX27_INT_UART4		17
+#define MX27_INT_UART3		18
+#define MX27_INT_UART2		19
+#define MX27_INT_UART1		20
+#define MX27_INT_KPP		21
+#define MX27_INT_RTC		22
+#define MX27_INT_PWM		23
+#define MX27_INT_GPT3		24
+#define MX27_INT_GPT2		25
+#define MX27_INT_GPT1		26
+#define MX27_INT_WDOG		27
+#define MX27_INT_PCMCIA		28
+#define MX27_INT_NANDFC		29
+#define MX27_INT_ATA		30
+#define MX27_INT_CSI		31
+#define MX27_INT_DMACH0		32
+#define MX27_INT_DMACH1		33
+#define MX27_INT_DMACH2		34
+#define MX27_INT_DMACH3		35
+#define MX27_INT_DMACH4		36
+#define MX27_INT_DMACH5		37
+#define MX27_INT_DMACH6		38
+#define MX27_INT_DMACH7		39
+#define MX27_INT_DMACH8		40
+#define MX27_INT_DMACH9		41
+#define MX27_INT_DMACH10	42
+#define MX27_INT_DMACH11	43
+#define MX27_INT_DMACH12	44
+#define MX27_INT_DMACH13	45
+#define MX27_INT_DMACH14	46
+#define MX27_INT_DMACH15	47
+#define MX27_INT_UART6		48
+#define MX27_INT_UART5		49
+#define MX27_INT_FEC		50
+#define MX27_INT_EMMAPRP	51
+#define MX27_INT_EMMAPP		52
+#define MX27_INT_VPU		53
+#define MX27_INT_USB1		54
+#define MX27_INT_USB2		55
+#define MX27_INT_USB3		56
+#define MX27_INT_SCC_SMN	57
+#define MX27_INT_SCC_SCM	58
+#define MX27_INT_SAHARA		59
+#define MX27_INT_SLCDC		60
+#define MX27_INT_LCDC		61
+#define MX27_INT_IIM		62
+#define MX27_INT_CCM		63
 
 /* fixed DMA request numbers */
-#define DMA_REQ_NFC             37
-#define DMA_REQ_SDHC3           36
-#define DMA_REQ_UART6_RX        35
-#define DMA_REQ_UART6_TX        34
-#define DMA_REQ_UART5_RX        33
-#define DMA_REQ_UART5_TX        32
-#define DMA_REQ_ATA_RCV         29
-#define DMA_REQ_ATA_TX          28
-#define DMA_REQ_MSHC            4
+#define MX27_DMA_REQ_CSPI3_RX	1
+#define MX27_DMA_REQ_CSPI3_TX	2
+#define MX27_DMA_REQ_EXT	3
+#define MX27_DMA_REQ_MSHC	4
+#define MX27_DMA_REQ_SDHC2	6
+#define MX27_DMA_REQ_SDHC1	7
+#define MX27_DMA_REQ_SSI2_RX0	8
+#define MX27_DMA_REQ_SSI2_TX0	9
+#define MX27_DMA_REQ_SSI2_RX1	10
+#define MX27_DMA_REQ_SSI2_TX1	11
+#define MX27_DMA_REQ_SSI1_RX0	12
+#define MX27_DMA_REQ_SSI1_TX0	13
+#define MX27_DMA_REQ_SSI1_RX1	14
+#define MX27_DMA_REQ_SSI1_TX1	15
+#define MX27_DMA_REQ_CSPI2_RX	16
+#define MX27_DMA_REQ_CSPI2_TX	17
+#define MX27_DMA_REQ_CSPI1_RX	18
+#define MX27_DMA_REQ_CSPI1_TX	19
+#define MX27_DMA_REQ_UART4_RX	20
+#define MX27_DMA_REQ_UART4_TX	21
+#define MX27_DMA_REQ_UART3_RX	22
+#define MX27_DMA_REQ_UART3_TX	23
+#define MX27_DMA_REQ_UART2_RX	24
+#define MX27_DMA_REQ_UART2_TX	25
+#define MX27_DMA_REQ_UART1_RX	26
+#define MX27_DMA_REQ_UART1_TX	27
+#define MX27_DMA_REQ_ATA_TX	28
+#define MX27_DMA_REQ_ATA_RCV	29
+#define MX27_DMA_REQ_CSI_STAT	30
+#define MX27_DMA_REQ_CSI_RX	31
+#define MX27_DMA_REQ_UART5_TX	32
+#define MX27_DMA_REQ_UART5_RX	33
+#define MX27_DMA_REQ_UART6_TX	34
+#define MX27_DMA_REQ_UART6_RX	35
+#define MX27_DMA_REQ_SDHC3	36
+#define MX27_DMA_REQ_NFC	37
 
 /* silicon revisions specific to i.MX27 */
 #define CHIP_REV_1_0		0x00
@@ -114,6 +225,72 @@
 extern int mx27_revision(void);
 #endif
 
-/* Mandatory defines used globally */
+/* these should go away */
+#define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
+#define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
+#define GPT4_BASE_ADDR MX27_GPT4_BASE_ADDR
+#define UART5_BASE_ADDR MX27_UART5_BASE_ADDR
+#define UART6_BASE_ADDR MX27_UART6_BASE_ADDR
+#define I2C2_BASE_ADDR MX27_I2C2_BASE_ADDR
+#define SDHC3_BASE_ADDR MX27_SDHC3_BASE_ADDR
+#define GPT6_BASE_ADDR MX27_GPT6_BASE_ADDR
+#define VPU_BASE_ADDR MX27_VPU_BASE_ADDR
+#define OTG_BASE_ADDR MX27_OTG_BASE_ADDR
+#define SAHARA_BASE_ADDR MX27_SAHARA_BASE_ADDR
+#define IIM_BASE_ADDR MX27_IIM_BASE_ADDR
+#define RTIC_BASE_ADDR MX27_RTIC_BASE_ADDR
+#define FEC_BASE_ADDR MX27_FEC_BASE_ADDR
+#define SCC_BASE_ADDR MX27_SCC_BASE_ADDR
+#define ETB_BASE_ADDR MX27_ETB_BASE_ADDR
+#define ETB_RAM_BASE_ADDR MX27_ETB_RAM_BASE_ADDR
+#define ROMP_BASE_ADDR MX27_ROMP_BASE_ADDR
+#define ATA_BASE_ADDR MX27_ATA_BASE_ADDR
+#define SDRAM_BASE_ADDR MX27_SDRAM_BASE_ADDR
+#define CSD1_BASE_ADDR MX27_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX27_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX27_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX27_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX27_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX27_CS4_BASE_ADDR
+#define CS5_BASE_ADDR MX27_CS5_BASE_ADDR
+#define X_MEMC_BASE_ADDR MX27_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX27_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX27_X_MEMC_SIZE
+#define NFC_BASE_ADDR MX27_NFC_BASE_ADDR
+#define SDRAMC_BASE_ADDR MX27_SDRAMC_BASE_ADDR
+#define WEIM_BASE_ADDR MX27_WEIM_BASE_ADDR
+#define M3IF_BASE_ADDR MX27_M3IF_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX27_PCMCIA_CTL_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX27_PCMCIA_MEM_BASE_ADDR
+#define IRAM_BASE_ADDR MX27_IRAM_BASE_ADDR
+#define MXC_INT_I2C2 MX27_INT_I2C2
+#define MXC_INT_GPT6 MX27_INT_GPT6
+#define MXC_INT_GPT5 MX27_INT_GPT5
+#define MXC_INT_GPT4 MX27_INT_GPT4
+#define MXC_INT_RTIC MX27_INT_RTIC
+#define MXC_INT_SDHC MX27_INT_SDHC
+#define MXC_INT_SDHC3 MX27_INT_SDHC3
+#define MXC_INT_ATA MX27_INT_ATA
+#define MXC_INT_UART6 MX27_INT_UART6
+#define MXC_INT_UART5 MX27_INT_UART5
+#define MXC_INT_FEC MX27_INT_FEC
+#define MXC_INT_VPU MX27_INT_VPU
+#define MXC_INT_USB1 MX27_INT_USB1
+#define MXC_INT_USB2 MX27_INT_USB2
+#define MXC_INT_USB3 MX27_INT_USB3
+#define MXC_INT_SCC_SMN MX27_INT_SCC_SMN
+#define MXC_INT_SCC_SCM MX27_INT_SCC_SCM
+#define MXC_INT_SAHARA MX27_INT_SAHARA
+#define MXC_INT_IIM MX27_INT_IIM
+#define MXC_INT_CCM MX27_INT_CCM
+#define DMA_REQ_MSHC MX27_DMA_REQ_MSHC
+#define DMA_REQ_ATA_TX MX27_DMA_REQ_ATA_TX
+#define DMA_REQ_ATA_RCV MX27_DMA_REQ_ATA_RCV
+#define DMA_REQ_UART5_TX MX27_DMA_REQ_UART5_TX
+#define DMA_REQ_UART5_RX MX27_DMA_REQ_UART5_RX
+#define DMA_REQ_UART6_TX MX27_DMA_REQ_UART6_TX
+#define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
+#define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
+#define DMA_REQ_NFC MX27_DMA_REQ_NFC
 
 #endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index db5d921e0fe6..f2eaf140ed02 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -25,51 +25,49 @@
 
 /* The following addresses are common between i.MX21 and i.MX27 */
 
-/* Register offests */
-#define AIPI_BASE_ADDR          0x10000000
-#define AIPI_BASE_ADDR_VIRT     0xF4000000
-#define AIPI_SIZE               SZ_1M
-
-#define DMA_BASE_ADDR           (AIPI_BASE_ADDR + 0x01000)
-#define WDOG_BASE_ADDR          (AIPI_BASE_ADDR + 0x02000)
-#define GPT1_BASE_ADDR          (AIPI_BASE_ADDR + 0x03000)
-#define GPT2_BASE_ADDR          (AIPI_BASE_ADDR + 0x04000)
-#define GPT3_BASE_ADDR          (AIPI_BASE_ADDR + 0x05000)
-#define PWM_BASE_ADDR           (AIPI_BASE_ADDR + 0x06000)
-#define RTC_BASE_ADDR           (AIPI_BASE_ADDR + 0x07000)
-#define KPP_BASE_ADDR           (AIPI_BASE_ADDR + 0x08000)
-#define OWIRE_BASE_ADDR         (AIPI_BASE_ADDR + 0x09000)
-#define UART1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0A000)
-#define UART2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0B000)
-#define UART3_BASE_ADDR         (AIPI_BASE_ADDR + 0x0C000)
-#define UART4_BASE_ADDR         (AIPI_BASE_ADDR + 0x0D000)
-#define CSPI1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0E000)
-#define CSPI2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0F000)
-#define SSI1_BASE_ADDR          (AIPI_BASE_ADDR + 0x10000)
-#define SSI2_BASE_ADDR          (AIPI_BASE_ADDR + 0x11000)
-#define I2C_BASE_ADDR           (AIPI_BASE_ADDR + 0x12000)
-#define SDHC1_BASE_ADDR         (AIPI_BASE_ADDR + 0x13000)
-#define SDHC2_BASE_ADDR         (AIPI_BASE_ADDR + 0x14000)
-#define GPIO_BASE_ADDR          (AIPI_BASE_ADDR + 0x15000)
-#define AUDMUX_BASE_ADDR        (AIPI_BASE_ADDR + 0x16000)
-#define CSPI3_BASE_ADDR         (AIPI_BASE_ADDR + 0x17000)
-#define LCDC_BASE_ADDR          (AIPI_BASE_ADDR + 0x21000)
-#define SLCDC_BASE_ADDR         (AIPI_BASE_ADDR + 0x22000)
-#define USBOTG_BASE_ADDR        (AIPI_BASE_ADDR + 0x24000)
-#define EMMA_PP_BASE_ADDR       (AIPI_BASE_ADDR + 0x26000)
-#define EMMA_PRP_BASE_ADDR      (AIPI_BASE_ADDR + 0x26400)
-#define CCM_BASE_ADDR           (AIPI_BASE_ADDR + 0x27000)
-#define SYSCTRL_BASE_ADDR       (AIPI_BASE_ADDR + 0x27800)
-#define JAM_BASE_ADDR           (AIPI_BASE_ADDR + 0x3E000)
-#define MAX_BASE_ADDR           (AIPI_BASE_ADDR + 0x3F000)
-
-#define AVIC_BASE_ADDR          0x10040000
-
-#define SAHB1_BASE_ADDR         0x80000000
-#define SAHB1_BASE_ADDR_VIRT    0xF4100000
-#define SAHB1_SIZE              SZ_1M
-
-#define CSI_BASE_ADDR           (SAHB1_BASE_ADDR + 0x0000)
+/* Register offsets */
+#define MX2x_AIPI_BASE_ADDR		0x10000000
+#define MX2x_AIPI_BASE_ADDR_VIRT	0xf4000000
+#define MX2x_AIPI_SIZE			SZ_1M
+#define MX2x_DMA_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x01000)
+#define MX2x_WDOG_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x02000)
+#define MX2x_GPT1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x03000)
+#define MX2x_GPT2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x04000)
+#define MX2x_GPT3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x05000)
+#define MX2x_PWM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x06000)
+#define MX2x_RTC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x07000)
+#define MX2x_KPP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x08000)
+#define MX2x_OWIRE_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x09000)
+#define MX2x_UART1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0a000)
+#define MX2x_UART2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0b000)
+#define MX2x_UART3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0c000)
+#define MX2x_UART4_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0d000)
+#define MX2x_CSPI1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0e000)
+#define MX2x_CSPI2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0f000)
+#define MX2x_SSI1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x10000)
+#define MX2x_SSI2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x11000)
+#define MX2x_I2C_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x12000)
+#define MX2x_SDHC1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x13000)
+#define MX2x_SDHC2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x14000)
+#define MX2x_GPIO_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x15000)
+#define MX2x_AUDMUX_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x16000)
+#define MX2x_CSPI3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x17000)
+#define MX2x_LCDC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x21000)
+#define MX2x_SLCDC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x22000)
+#define MX2x_USBOTG_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x24000)
+#define MX2x_EMMA_PP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x26000)
+#define MX2x_EMMA_PRP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x26400)
+#define MX2x_CCM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x27000)
+#define MX2x_SYSCTRL_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x27800)
+#define MX2x_JAM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x3e000)
+#define MX2x_MAX_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x3f000)
+
+#define MX2x_AVIC_BASE_ADDR		0x10040000
+
+#define MX2x_SAHB1_BASE_ADDR		0x80000000
+#define MX2x_SAHB1_BASE_ADDR_VIRT	0xf4100000
+#define MX2x_SAHB1_SIZE			SZ_1M
+#define MX2x_CSI_BASE_ADDR			(MX2x_SAHB1_BASE_ADDR + 0x0000)
 
 /*
  * This macro defines the physical to virtual address mapping for all the
@@ -105,78 +103,189 @@
 	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
 
 /* fixed interrupt numbers */
-#define MXC_INT_LCDC		61
-#define MXC_INT_SLCDC		60
-#define MXC_INT_EMMAPP		52
-#define MXC_INT_EMMAPRP		51
-#define MXC_INT_DMACH15		47
-#define MXC_INT_DMACH14		46
-#define MXC_INT_DMACH13		45
-#define MXC_INT_DMACH12		44
-#define MXC_INT_DMACH11		43
-#define MXC_INT_DMACH10		42
-#define MXC_INT_DMACH9		41
-#define MXC_INT_DMACH8		40
-#define MXC_INT_DMACH7		39
-#define MXC_INT_DMACH6		38
-#define MXC_INT_DMACH5		37
-#define MXC_INT_DMACH4		36
-#define MXC_INT_DMACH3		35
-#define MXC_INT_DMACH2		34
-#define MXC_INT_DMACH1		33
-#define MXC_INT_DMACH0		32
-#define MXC_INT_CSI		31
-#define MXC_INT_NANDFC		29
-#define MXC_INT_PCMCIA		28
-#define MXC_INT_WDOG		27
-#define MXC_INT_GPT1		26
-#define MXC_INT_GPT2		25
-#define MXC_INT_GPT3		24
-#define MXC_INT_GPT		INT_GPT1
-#define MXC_INT_PWM		23
-#define MXC_INT_RTC		22
-#define MXC_INT_KPP		21
-#define MXC_INT_UART1		20
-#define MXC_INT_UART2		19
-#define MXC_INT_UART3		18
-#define MXC_INT_UART4		17
-#define MXC_INT_CSPI1		16
-#define MXC_INT_CSPI2		15
-#define MXC_INT_SSI1		14
-#define MXC_INT_SSI2		13
-#define MXC_INT_I2C		12
-#define MXC_INT_SDHC1		11
-#define MXC_INT_SDHC2		10
-#define MXC_INT_GPIO		8
-#define MXC_INT_CSPI3		6
+#define MX2x_INT_CSPI3		6
+#define MX2x_INT_GPIO		8
+#define MX2x_INT_SDHC2		10
+#define MX2x_INT_SDHC1		11
+#define MX2x_INT_I2C		12
+#define MX2x_INT_SSI2		13
+#define MX2x_INT_SSI1		14
+#define MX2x_INT_CSPI2		15
+#define MX2x_INT_CSPI1		16
+#define MX2x_INT_UART4		17
+#define MX2x_INT_UART3		18
+#define MX2x_INT_UART2		19
+#define MX2x_INT_UART1		20
+#define MX2x_INT_KPP		21
+#define MX2x_INT_RTC		22
+#define MX2x_INT_PWM		23
+#define MX2x_INT_GPT3		24
+#define MX2x_INT_GPT2		25
+#define MX2x_INT_GPT1		26
+#define MX2x_INT_WDOG		27
+#define MX2x_INT_PCMCIA		28
+#define MX2x_INT_NANDFC		29
+#define MX2x_INT_CSI		31
+#define MX2x_INT_DMACH0		32
+#define MX2x_INT_DMACH1		33
+#define MX2x_INT_DMACH2		34
+#define MX2x_INT_DMACH3		35
+#define MX2x_INT_DMACH4		36
+#define MX2x_INT_DMACH5		37
+#define MX2x_INT_DMACH6		38
+#define MX2x_INT_DMACH7		39
+#define MX2x_INT_DMACH8		40
+#define MX2x_INT_DMACH9		41
+#define MX2x_INT_DMACH10	42
+#define MX2x_INT_DMACH11	43
+#define MX2x_INT_DMACH12	44
+#define MX2x_INT_DMACH13	45
+#define MX2x_INT_DMACH14	46
+#define MX2x_INT_DMACH15	47
+#define MX2x_INT_EMMAPRP	51
+#define MX2x_INT_EMMAPP		52
+#define MX2x_INT_SLCDC		60
+#define MX2x_INT_LCDC		61
 
 /* fixed DMA request numbers */
-#define DMA_REQ_CSI_RX          31
-#define DMA_REQ_CSI_STAT        30
-#define DMA_REQ_UART1_TX        27
-#define DMA_REQ_UART1_RX        26
-#define DMA_REQ_UART2_TX        25
-#define DMA_REQ_UART2_RX        24
-#define DMA_REQ_UART3_TX        23
-#define DMA_REQ_UART3_RX        22
-#define DMA_REQ_UART4_TX        21
-#define DMA_REQ_UART4_RX        20
-#define DMA_REQ_CSPI1_TX        19
-#define DMA_REQ_CSPI1_RX        18
-#define DMA_REQ_CSPI2_TX        17
-#define DMA_REQ_CSPI2_RX        16
-#define DMA_REQ_SSI1_TX1        15
-#define DMA_REQ_SSI1_RX1        14
-#define DMA_REQ_SSI1_TX0        13
-#define DMA_REQ_SSI1_RX0        12
-#define DMA_REQ_SSI2_TX1        11
-#define DMA_REQ_SSI2_RX1        10
-#define DMA_REQ_SSI2_TX0        9
-#define DMA_REQ_SSI2_RX0        8
-#define DMA_REQ_SDHC1           7
-#define DMA_REQ_SDHC2           6
-#define DMA_REQ_EXT             3
-#define DMA_REQ_CSPI3_TX        2
-#define DMA_REQ_CSPI3_RX        1
+#define MX2x_DMA_REQ_CSPI3_RX	1
+#define MX2x_DMA_REQ_CSPI3_TX	2
+#define MX2x_DMA_REQ_EXT	3
+#define MX2x_DMA_REQ_SDHC2	6
+#define MX2x_DMA_REQ_SDHC1	7
+#define MX2x_DMA_REQ_SSI2_RX0	8
+#define MX2x_DMA_REQ_SSI2_TX0	9
+#define MX2x_DMA_REQ_SSI2_RX1	10
+#define MX2x_DMA_REQ_SSI2_TX1	11
+#define MX2x_DMA_REQ_SSI1_RX0	12
+#define MX2x_DMA_REQ_SSI1_TX0	13
+#define MX2x_DMA_REQ_SSI1_RX1	14
+#define MX2x_DMA_REQ_SSI1_TX1	15
+#define MX2x_DMA_REQ_CSPI2_RX	16
+#define MX2x_DMA_REQ_CSPI2_TX	17
+#define MX2x_DMA_REQ_CSPI1_RX	18
+#define MX2x_DMA_REQ_CSPI1_TX	19
+#define MX2x_DMA_REQ_UART4_RX	20
+#define MX2x_DMA_REQ_UART4_TX	21
+#define MX2x_DMA_REQ_UART3_RX	22
+#define MX2x_DMA_REQ_UART3_TX	23
+#define MX2x_DMA_REQ_UART2_RX	24
+#define MX2x_DMA_REQ_UART2_TX	25
+#define MX2x_DMA_REQ_UART1_RX	26
+#define MX2x_DMA_REQ_UART1_TX	27
+#define MX2x_DMA_REQ_CSI_STAT	30
+#define MX2x_DMA_REQ_CSI_RX	31
+
+/* these should go away */
+#define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
+#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
+#define AIPI_SIZE MX2x_AIPI_SIZE
+#define DMA_BASE_ADDR MX2x_DMA_BASE_ADDR
+#define WDOG_BASE_ADDR MX2x_WDOG_BASE_ADDR
+#define GPT1_BASE_ADDR MX2x_GPT1_BASE_ADDR
+#define GPT2_BASE_ADDR MX2x_GPT2_BASE_ADDR
+#define GPT3_BASE_ADDR MX2x_GPT3_BASE_ADDR
+#define PWM_BASE_ADDR MX2x_PWM_BASE_ADDR
+#define RTC_BASE_ADDR MX2x_RTC_BASE_ADDR
+#define KPP_BASE_ADDR MX2x_KPP_BASE_ADDR
+#define OWIRE_BASE_ADDR MX2x_OWIRE_BASE_ADDR
+#define UART1_BASE_ADDR MX2x_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX2x_UART2_BASE_ADDR
+#define UART3_BASE_ADDR MX2x_UART3_BASE_ADDR
+#define UART4_BASE_ADDR MX2x_UART4_BASE_ADDR
+#define CSPI1_BASE_ADDR MX2x_CSPI1_BASE_ADDR
+#define CSPI2_BASE_ADDR MX2x_CSPI2_BASE_ADDR
+#define SSI1_BASE_ADDR MX2x_SSI1_BASE_ADDR
+#define SSI2_BASE_ADDR MX2x_SSI2_BASE_ADDR
+#define I2C_BASE_ADDR MX2x_I2C_BASE_ADDR
+#define SDHC1_BASE_ADDR MX2x_SDHC1_BASE_ADDR
+#define SDHC2_BASE_ADDR MX2x_SDHC2_BASE_ADDR
+#define GPIO_BASE_ADDR MX2x_GPIO_BASE_ADDR
+#define AUDMUX_BASE_ADDR MX2x_AUDMUX_BASE_ADDR
+#define CSPI3_BASE_ADDR MX2x_CSPI3_BASE_ADDR
+#define LCDC_BASE_ADDR MX2x_LCDC_BASE_ADDR
+#define SLCDC_BASE_ADDR MX2x_SLCDC_BASE_ADDR
+#define USBOTG_BASE_ADDR MX2x_USBOTG_BASE_ADDR
+#define EMMA_PP_BASE_ADDR MX2x_EMMA_PP_BASE_ADDR
+#define EMMA_PRP_BASE_ADDR MX2x_EMMA_PRP_BASE_ADDR
+#define CCM_BASE_ADDR MX2x_CCM_BASE_ADDR
+#define SYSCTRL_BASE_ADDR MX2x_SYSCTRL_BASE_ADDR
+#define JAM_BASE_ADDR MX2x_JAM_BASE_ADDR
+#define MAX_BASE_ADDR MX2x_MAX_BASE_ADDR
+#define AVIC_BASE_ADDR MX2x_AVIC_BASE_ADDR
+#define SAHB1_BASE_ADDR MX2x_SAHB1_BASE_ADDR
+#define SAHB1_BASE_ADDR_VIRT MX2x_SAHB1_BASE_ADDR_VIRT
+#define SAHB1_SIZE MX2x_SAHB1_SIZE
+#define CSI_BASE_ADDR MX2x_CSI_BASE_ADDR
+#define MXC_INT_CSPI3 MX2x_INT_CSPI3
+#define MXC_INT_GPIO MX2x_INT_GPIO
+#define MXC_INT_SDHC2 MX2x_INT_SDHC2
+#define MXC_INT_SDHC1 MX2x_INT_SDHC1
+#define MXC_INT_I2C MX2x_INT_I2C
+#define MXC_INT_SSI2 MX2x_INT_SSI2
+#define MXC_INT_SSI1 MX2x_INT_SSI1
+#define MXC_INT_CSPI2 MX2x_INT_CSPI2
+#define MXC_INT_CSPI1 MX2x_INT_CSPI1
+#define MXC_INT_UART4 MX2x_INT_UART4
+#define MXC_INT_UART3 MX2x_INT_UART3
+#define MXC_INT_UART2 MX2x_INT_UART2
+#define MXC_INT_UART1 MX2x_INT_UART1
+#define MXC_INT_KPP MX2x_INT_KPP
+#define MXC_INT_RTC MX2x_INT_RTC
+#define MXC_INT_PWM MX2x_INT_PWM
+#define MXC_INT_GPT3 MX2x_INT_GPT3
+#define MXC_INT_GPT2 MX2x_INT_GPT2
+#define MXC_INT_GPT1 MX2x_INT_GPT1
+#define MXC_INT_WDOG MX2x_INT_WDOG
+#define MXC_INT_PCMCIA MX2x_INT_PCMCIA
+#define MXC_INT_NANDFC MX2x_INT_NANDFC
+#define MXC_INT_CSI MX2x_INT_CSI
+#define MXC_INT_DMACH0 MX2x_INT_DMACH0
+#define MXC_INT_DMACH1 MX2x_INT_DMACH1
+#define MXC_INT_DMACH2 MX2x_INT_DMACH2
+#define MXC_INT_DMACH3 MX2x_INT_DMACH3
+#define MXC_INT_DMACH4 MX2x_INT_DMACH4
+#define MXC_INT_DMACH5 MX2x_INT_DMACH5
+#define MXC_INT_DMACH6 MX2x_INT_DMACH6
+#define MXC_INT_DMACH7 MX2x_INT_DMACH7
+#define MXC_INT_DMACH8 MX2x_INT_DMACH8
+#define MXC_INT_DMACH9 MX2x_INT_DMACH9
+#define MXC_INT_DMACH10 MX2x_INT_DMACH10
+#define MXC_INT_DMACH11 MX2x_INT_DMACH11
+#define MXC_INT_DMACH12 MX2x_INT_DMACH12
+#define MXC_INT_DMACH13 MX2x_INT_DMACH13
+#define MXC_INT_DMACH14 MX2x_INT_DMACH14
+#define MXC_INT_DMACH15 MX2x_INT_DMACH15
+#define MXC_INT_EMMAPRP MX2x_INT_EMMAPRP
+#define MXC_INT_EMMAPP MX2x_INT_EMMAPP
+#define MXC_INT_SLCDC MX2x_INT_SLCDC
+#define MXC_INT_LCDC MX2x_INT_LCDC
+#define DMA_REQ_CSPI3_RX MX2x_DMA_REQ_CSPI3_RX
+#define DMA_REQ_CSPI3_TX MX2x_DMA_REQ_CSPI3_TX
+#define DMA_REQ_EXT MX2x_DMA_REQ_EXT
+#define DMA_REQ_SDHC2 MX2x_DMA_REQ_SDHC2
+#define DMA_REQ_SDHC1 MX2x_DMA_REQ_SDHC1
+#define DMA_REQ_SSI2_RX0 MX2x_DMA_REQ_SSI2_RX0
+#define DMA_REQ_SSI2_TX0 MX2x_DMA_REQ_SSI2_TX0
+#define DMA_REQ_SSI2_RX1 MX2x_DMA_REQ_SSI2_RX1
+#define DMA_REQ_SSI2_TX1 MX2x_DMA_REQ_SSI2_TX1
+#define DMA_REQ_SSI1_RX0 MX2x_DMA_REQ_SSI1_RX0
+#define DMA_REQ_SSI1_TX0 MX2x_DMA_REQ_SSI1_TX0
+#define DMA_REQ_SSI1_RX1 MX2x_DMA_REQ_SSI1_RX1
+#define DMA_REQ_SSI1_TX1 MX2x_DMA_REQ_SSI1_TX1
+#define DMA_REQ_CSPI2_RX MX2x_DMA_REQ_CSPI2_RX
+#define DMA_REQ_CSPI2_TX MX2x_DMA_REQ_CSPI2_TX
+#define DMA_REQ_CSPI1_RX MX2x_DMA_REQ_CSPI1_RX
+#define DMA_REQ_CSPI1_TX MX2x_DMA_REQ_CSPI1_TX
+#define DMA_REQ_UART4_RX MX2x_DMA_REQ_UART4_RX
+#define DMA_REQ_UART4_TX MX2x_DMA_REQ_UART4_TX
+#define DMA_REQ_UART3_RX MX2x_DMA_REQ_UART3_RX
+#define DMA_REQ_UART3_TX MX2x_DMA_REQ_UART3_TX
+#define DMA_REQ_UART2_RX MX2x_DMA_REQ_UART2_RX
+#define DMA_REQ_UART2_TX MX2x_DMA_REQ_UART2_TX
+#define DMA_REQ_UART1_RX MX2x_DMA_REQ_UART1_RX
+#define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
+#define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
+#define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
 
 #endif /* __ASM_ARCH_MXC_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 14ac0dcc82f4..b8b47d139eb5 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,45 +1,218 @@
 /*
  * IRAM
  */
-#define MX31_IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
+#define MX31_IRAM_BASE_ADDR		0x1ffc0000	/* internal ram */
 #define MX31_IRAM_SIZE			SZ_16K
 
-#define MX31_OTG_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00088000)
-#define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
-#define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
-#define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
+#define MX31_L2CC_BASE_ADDR		0x30000000
+#define MX31_L2CC_SIZE			SZ_1M
 
-#define MMC_SDHC1_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00004000)
-#define MMC_SDHC2_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00008000)
-#define SIM1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00018000)
-#define IIM_BASE_ADDR		(SPBA0_BASE_ADDR + 0x0001C000)
+#define MX31_AIPS1_BASE_ADDR		0x43f00000
+#define MX31_AIPS1_BASE_ADDR_VIRT	0xfc000000
+#define MX31_AIPS1_SIZE			SZ_1M
+#define MX31_MAX_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x04000)
+#define MX31_EVTMON_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x08000)
+#define MX31_CLKCTL_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x0c000)
+#define MX31_ETB_SLOT4_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x10000)
+#define MX31_ETB_SLOT5_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x14000)
+#define MX31_ECT_CTIO_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x18000)
+#define MX31_I2C_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x80000)
+#define MX31_I2C3_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x84000)
+#define MX31_OTG_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x88000)
+#define MX31_ATA_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x8c000)
+#define MX31_UART1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x90000)
+#define MX31_UART2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x94000)
+#define MX31_I2C2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x98000)
+#define MX31_OWIRE_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x9c000)
+#define MX31_SSI1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa0000)
+#define MX31_CSPI1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa4000)
+#define MX31_KPP_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa8000)
+#define MX31_IOMUXC_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xac000)
+#define MX31_UART4_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb0000)
+#define MX31_UART5_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb4000)
+#define MX31_ECT_IP1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb8000)
+#define MX31_ECT_IP2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xbc000)
 
-#define CSPI3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00084000)
-#define FIRI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0008C000)
-#define SCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AE000)
-#define SMN_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AF000)
-#define MPEG4_ENC_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C8000)
+#define MX31_SPBA0_BASE_ADDR		0x50000000
+#define MX31_SPBA0_BASE_ADDR_VIRT	0xfc100000
+#define MX31_SPBA0_SIZE			SZ_1M
+#define MX31_MMC_SDHC1_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x04000)
+#define MX31_MMC_SDHC2_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x08000)
+#define MX31_UART3_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x0c000)
+#define MX31_CSPI2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x10000)
+#define MX31_SSI2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x14000)
+#define MX31_SIM1_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x18000)
+#define MX31_IIM_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x1c000)
+#define MX31_ATA_DMA_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x20000)
+#define MX31_MSHC1_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x24000)
+#define MX31_SPBA_CTRL_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x3c000)
 
-#define MX31_NFC_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x0000)
+#define MX31_AIPS2_BASE_ADDR		0x53f00000
+#define MX31_AIPS2_BASE_ADDR_VIRT	0xfc200000
+#define MX31_AIPS2_SIZE			SZ_1M
+#define MX31_CCM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x80000)
+#define MX31_CSPI3_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x84000)
+#define MX31_FIRI_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x8c000)
+#define MX31_GPT1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x90000)
+#define MX31_EPIT1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x94000)
+#define MX31_EPIT2_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x98000)
+#define MX31_GPIO3_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xa4000)
+#define MX31_SCC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xac000)
+#define MX31_SCM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xae000)
+#define MX31_SMN_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xaf000)
+#define MX31_RNGA_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xb0000)
+#define MX31_IPU_CTRL_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xc0000)
+#define MX31_AUDMUX_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xc4000)
+#define MX31_MPEG4_ENC_BASE_ADDR		(MX31_AIPS2_BASE_ADDR + 0xc8000)
+#define MX31_GPIO1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xcc000)
+#define MX31_GPIO2_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd0000)
+#define MX31_SDMA_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd4000)
+#define MX31_RTC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd8000)
+#define MX31_WDOG_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xdc000)
+#define MX31_PWM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xe0000)
+#define MX31_RTIC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xec000)
 
-#define MXC_INT_MPEG4_ENCODER	5
-#define MXC_INT_FIRI		7
+#define MX31_ROMP_BASE_ADDR		0x60000000
+#define MX31_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX31_ROMP_SIZE			SZ_1M
+
+#define MX31_AVIC_BASE_ADDR		0x68000000
+#define MX31_AVIC_BASE_ADDR_VIRT	0xfc400000
+#define MX31_AVIC_SIZE			SZ_1M
+
+#define MX31_IPU_MEM_BASE_ADDR		0x70000000
+#define MX31_CSD0_BASE_ADDR		0x80000000
+#define MX31_CSD1_BASE_ADDR		0x90000000
+
+#define MX31_CS0_BASE_ADDR		0xa0000000
+#define MX31_CS1_BASE_ADDR		0xa8000000
+#define MX31_CS2_BASE_ADDR		0xb0000000
+#define MX31_CS3_BASE_ADDR		0xb2000000
+
+#define MX31_CS4_BASE_ADDR		0xb4000000
+#define MX31_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX31_CS4_SIZE			SZ_32M
+
+#define MX31_CS5_BASE_ADDR		0xb6000000
+#define MX31_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX31_CS5_SIZE			SZ_32M
+
+#define MX31_X_MEMC_BASE_ADDR		0xb8000000
+#define MX31_X_MEMC_BASE_ADDR_VIRT	0xfc320000
+#define MX31_X_MEMC_SIZE		SZ_64K
+#define MX31_NFC_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x0000)
+#define MX31_ESDCTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x1000)
+#define MX31_WEIM_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x2000)
+#define MX31_M3IF_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x3000)
+#define MX31_EMI_CTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x4000)
+#define MX31_PCMCIA_CTL_BASE_ADDR		MX31_EMI_CTL_BASE_ADDR
+
+#define MX31_PCMCIA_MEM_BASE_ADDR	0xbc000000
+
+#define MX31_INT_I2C3		3
+#define MX31_INT_I2C2		4
+#define MX31_INT_MPEG4_ENCODER	5
+#define MX31_INT_RTIC		6
+#define MX31_INT_FIRI		7
 #define MX31_INT_MMC_SDHC2	8
-#define MXC_INT_MMC_SDHC1	9
+#define MX31_INT_MMC_SDHC1	9
+#define MX31_INT_I2C		10
 #define MX31_INT_SSI2		11
 #define MX31_INT_SSI1		12
-#define MXC_INT_MBX		16
-#define MXC_INT_CSPI3		17
-#define MXC_INT_SIM2		20
-#define MXC_INT_SIM1		21
-#define MXC_INT_CCM_DVFS	31
-#define MXC_INT_USB1		35
-#define MXC_INT_USB2		36
-#define MXC_INT_USB3		37
-#define MXC_INT_USB4		38
-#define MXC_INT_MSHC2		40
-#define MXC_INT_UART4		46
-#define MXC_INT_UART5		47
-#define MXC_INT_CCM		53
-#define MXC_INT_PCMCIA		54
+#define MX31_INT_CSPI2		13
+#define MX31_INT_CSPI1		14
+#define MX31_INT_ATA		15
+#define MX31_INT_MBX		16
+#define MX31_INT_CSPI3		17
+#define MX31_INT_UART3		18
+#define MX31_INT_IIM		19
+#define MX31_INT_SIM2		20
+#define MX31_INT_SIM1		21
+#define MX31_INT_RNGA		22
+#define MX31_INT_EVTMON		23
+#define MX31_INT_KPP		24
+#define MX31_INT_RTC		25
+#define MX31_INT_PWM		26
+#define MX31_INT_EPIT2		27
+#define MX31_INT_EPIT1		28
+#define MX31_INT_GPT		29
+#define MX31_INT_POWER_FAIL	30
+#define MX31_INT_CCM_DVFS	31
+#define MX31_INT_UART2		32
+#define MX31_INT_NANDFC		33
+#define MX31_INT_SDMA		34
+#define MX31_INT_USB1		35
+#define MX31_INT_USB2		36
+#define MX31_INT_USB3		37
+#define MX31_INT_USB4		38
+#define MX31_INT_MSHC1		39
+#define MX31_INT_MSHC2		40
+#define MX31_INT_IPU_ERR	41
+#define MX31_INT_IPU_SYN	42
+#define MX31_INT_UART1		45
+#define MX31_INT_UART4		46
+#define MX31_INT_UART5		47
+#define MX31_INT_ECT		48
+#define MX31_INT_SCC_SCM	49
+#define MX31_INT_SCC_SMN	50
+#define MX31_INT_GPIO2		51
+#define MX31_INT_GPIO1		52
+#define MX31_INT_CCM		53
+#define MX31_INT_PCMCIA		54
+#define MX31_INT_WDOG		55
+#define MX31_INT_GPIO3		56
+#define MX31_INT_EXT_POWER	58
+#define MX31_INT_EXT_TEMPER	59
+#define MX31_INT_EXT_SENSOR60	60
+#define MX31_INT_EXT_SENSOR61	61
+#define MX31_INT_EXT_WDOG	62
+#define MX31_INT_EXT_TV		63
+
+#define MX31_PROD_SIGNATURE		0x1	/* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define MX31_CHIP_REV_1_0		0x10
+#define MX31_CHIP_REV_1_1		0x11
+#define MX31_CHIP_REV_1_2		0x12
+#define MX31_CHIP_REV_1_3		0x13
+#define MX31_CHIP_REV_2_0		0x20
+#define MX31_CHIP_REV_2_1		0x21
+#define MX31_CHIP_REV_2_2		0x22
+#define MX31_CHIP_REV_2_3		0x23
+#define MX31_CHIP_REV_3_0		0x30
+#define MX31_CHIP_REV_3_1		0x31
+#define MX31_CHIP_REV_3_2		0x32
+
+#define MX31_SYSTEM_REV_MIN		MX31_CHIP_REV_1_0
+#define MX31_SYSTEM_REV_NUM		3
 
+/* these should go away */
+#define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
+#define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
+#define UART5_BASE_ADDR MX31_UART5_BASE_ADDR
+#define MMC_SDHC1_BASE_ADDR MX31_MMC_SDHC1_BASE_ADDR
+#define MMC_SDHC2_BASE_ADDR MX31_MMC_SDHC2_BASE_ADDR
+#define SIM1_BASE_ADDR MX31_SIM1_BASE_ADDR
+#define IIM_BASE_ADDR MX31_IIM_BASE_ADDR
+#define CSPI3_BASE_ADDR MX31_CSPI3_BASE_ADDR
+#define FIRI_BASE_ADDR MX31_FIRI_BASE_ADDR
+#define SCM_BASE_ADDR MX31_SCM_BASE_ADDR
+#define SMN_BASE_ADDR MX31_SMN_BASE_ADDR
+#define MPEG4_ENC_BASE_ADDR MX31_MPEG4_ENC_BASE_ADDR
+#define MXC_INT_MPEG4_ENCODER MX31_INT_MPEG4_ENCODER
+#define MXC_INT_FIRI MX31_INT_FIRI
+#define MXC_INT_MMC_SDHC1 MX31_INT_MMC_SDHC1
+#define MXC_INT_MBX MX31_INT_MBX
+#define MXC_INT_CSPI3 MX31_INT_CSPI3
+#define MXC_INT_SIM2 MX31_INT_SIM2
+#define MXC_INT_SIM1 MX31_INT_SIM1
+#define MXC_INT_CCM_DVFS MX31_INT_CCM_DVFS
+#define MXC_INT_USB1 MX31_INT_USB1
+#define MXC_INT_USB2 MX31_INT_USB2
+#define MXC_INT_USB3 MX31_INT_USB3
+#define MXC_INT_USB4 MX31_INT_USB4
+#define MXC_INT_MSHC2 MX31_INT_MSHC2
+#define MXC_INT_UART4 MX31_INT_UART4
+#define MXC_INT_UART5 MX31_INT_UART5
+#define MXC_INT_CCM MX31_INT_CCM
+#define MXC_INT_PCMCIA MX31_INT_PCMCIA
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index ab4cfec6c8ab..af871bce35b6 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -2,29 +2,196 @@
  * IRAM
  */
 #define MX35_IRAM_BASE_ADDR		0x10000000	/* internal ram */
-#define MX35_IRAM_SIZE		SZ_128K
+#define MX35_IRAM_SIZE			SZ_128K
 
-#define MXC_FEC_BASE_ADDR	0x50038000
-#define MX35_OTG_BASE_ADDR	0x53ff4000
-#define MX35_NFC_BASE_ADDR	0xBB000000
+#define MX35_L2CC_BASE_ADDR		0x30000000
+#define MX35_L2CC_SIZE			SZ_1M
+
+#define MX35_AIPS1_BASE_ADDR		0x43f00000
+#define MX35_AIPS1_BASE_ADDR_VIRT	0xfc000000
+#define MX35_AIPS1_SIZE			SZ_1M
+#define MX35_MAX_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x04000)
+#define MX35_EVTMON_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x08000)
+#define MX35_CLKCTL_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x0c000)
+#define MX35_ETB_SLOT4_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x10000)
+#define MX35_ETB_SLOT5_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x14000)
+#define MX35_ECT_CTIO_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x18000)
+#define MX35_I2C_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x80000)
+#define MX35_I2C3_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x84000)
+#define MX35_UART1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x90000)
+#define MX35_UART2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x94000)
+#define MX35_I2C2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x98000)
+#define MX35_OWIRE_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x9c000)
+#define MX35_SSI1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa0000)
+#define MX35_CSPI1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa4000)
+#define MX35_KPP_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa8000)
+#define MX35_IOMUXC_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xac000)
+#define MX35_ECT_IP1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xb8000)
+#define MX35_ECT_IP2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xbc000)
+
+#define MX35_SPBA0_BASE_ADDR		0x50000000
+#define MX35_SPBA0_BASE_ADDR_VIRT	0xfc100000
+#define MX35_SPBA0_SIZE			SZ_1M
+#define MX35_UART3_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x0c000)
+#define MX35_CSPI2_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x10000)
+#define MX35_SSI2_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x14000)
+#define MX35_ATA_DMA_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x20000)
+#define MX35_MSHC1_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x24000)
+#define MX35_FEC_BASE_ADDR		0x50038000
+#define MX35_SPBA_CTRL_BASE_ADDR		(MX35_SPBA0_BASE_ADDR + 0x3c000)
+
+#define MX35_AIPS2_BASE_ADDR		0x53f00000
+#define MX35_AIPS2_BASE_ADDR_VIRT	0xfc200000
+#define MX35_AIPS2_SIZE			SZ_1M
+#define MX35_CCM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x80000)
+#define MX35_GPT1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x90000)
+#define MX35_EPIT1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x94000)
+#define MX35_EPIT2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x98000)
+#define MX35_GPIO3_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xa4000)
+#define MX35_SCC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xac000)
+#define MX35_RNGA_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xb0000)
+#define MX35_IPU_CTRL_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc0000)
+#define MX35_AUDMUX_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc4000)
+#define MX35_GPIO1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xcc000)
+#define MX35_GPIO2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd0000)
+#define MX35_SDMA_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd4000)
+#define MX35_RTC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd8000)
+#define MX35_WDOG_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xdc000)
+#define MX35_PWM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe0000)
+#define MX35_RTIC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xec000)
+#define MX35_OTG_BASE_ADDR		0x53ff4000
+
+#define MX35_ROMP_BASE_ADDR		0x60000000
+#define MX35_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX35_ROMP_SIZE			SZ_1M
+
+#define MX35_AVIC_BASE_ADDR		0x68000000
+#define MX35_AVIC_BASE_ADDR_VIRT	0xfc400000
+#define MX35_AVIC_SIZE			SZ_1M
+
+/*
+ * Memory regions and CS
+ */
+#define MX35_IPU_MEM_BASE_ADDR		0x70000000
+#define MX35_CSD0_BASE_ADDR		0x80000000
+#define MX35_CSD1_BASE_ADDR		0x90000000
+
+#define MX35_CS0_BASE_ADDR		0xa0000000
+#define MX35_CS1_BASE_ADDR		0xa8000000
+#define MX35_CS2_BASE_ADDR		0xb0000000
+#define MX35_CS3_BASE_ADDR		0xb2000000
+
+#define MX35_CS4_BASE_ADDR		0xb4000000
+#define MX35_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX35_CS4_SIZE			SZ_32M
+
+#define MX35_CS5_BASE_ADDR		0xb6000000
+#define MX35_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX35_CS5_SIZE			SZ_32M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MX35_X_MEMC_BASE_ADDR		0xb8000000
+#define MX35_X_MEMC_BASE_ADDR_VIRT	0xfc320000
+#define MX35_X_MEMC_SIZE		SZ_64K
+#define MX35_ESDCTL_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x1000)
+#define MX35_WEIM_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x2000)
+#define MX35_M3IF_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x3000)
+#define MX35_EMI_CTL_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x4000)
+#define MX35_PCMCIA_CTL_BASE_ADDR		MX35_EMI_CTL_BASE_ADDR
+
+#define MX35_NFC_BASE_ADDR		0xbb000000
+#define MX35_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
 /*
  * Interrupt numbers
  */
-#define MXC_INT_OWIRE		2
+#define MX35_INT_OWIRE		2
+#define MX35_INT_I2C3		3
+#define MX35_INT_I2C2		4
+#define MX35_INT_RTIC		6
 #define MX35_INT_MMC_SDHC1	7
-#define MXC_INT_MMC_SDHC2	8
-#define MXC_INT_MMC_SDHC3	9
+#define MX35_INT_MMC_SDHC2	8
+#define MX35_INT_MMC_SDHC3	9
+#define MX35_INT_I2C		10
 #define MX35_INT_SSI1		11
 #define MX35_INT_SSI2		12
-#define MXC_INT_GPU2D		16
-#define MXC_INT_ASRC		17
-#define MXC_INT_USBHS		35
-#define MXC_INT_USBOTG		37
-#define MXC_INT_ESAI		40
-#define MXC_INT_CAN1		43
-#define MXC_INT_CAN2		44
-#define MXC_INT_MLB		46
-#define MXC_INT_SPDIF		47
-#define MXC_INT_FEC		57
+#define MX35_INT_CSPI2		13
+#define MX35_INT_CSPI1		14
+#define MX35_INT_ATA		15
+#define MX35_INT_GPU2D		16
+#define MX35_INT_ASRC		17
+#define MX35_INT_UART3		18
+#define MX35_INT_IIM		19
+#define MX35_INT_RNGA		22
+#define MX35_INT_EVTMON		23
+#define MX35_INT_KPP		24
+#define MX35_INT_RTC		25
+#define MX35_INT_PWM		26
+#define MX35_INT_EPIT2		27
+#define MX35_INT_EPIT1		28
+#define MX35_INT_GPT		29
+#define MX35_INT_POWER_FAIL	30
+#define MX35_INT_UART2		32
+#define MX35_INT_NANDFC		33
+#define MX35_INT_SDMA		34
+#define MX35_INT_USBHS		35
+#define MX35_INT_USBOTG		37
+#define MX35_INT_MSHC1		39
+#define MX35_INT_ESAI		40
+#define MX35_INT_IPU_ERR	41
+#define MX35_INT_IPU_SYN	42
+#define MX35_INT_CAN1		43
+#define MX35_INT_CAN2		44
+#define MX35_INT_UART1		45
+#define MX35_INT_MLB		46
+#define MX35_INT_SPDIF		47
+#define MX35_INT_ECT		48
+#define MX35_INT_SCC_SCM	49
+#define MX35_INT_SCC_SMN	50
+#define MX35_INT_GPIO2		51
+#define MX35_INT_GPIO1		52
+#define MX35_INT_WDOG		55
+#define MX35_INT_GPIO3		56
+#define MX35_INT_FEC		57
+#define MX35_INT_EXT_POWER	58
+#define MX35_INT_EXT_TEMPER	59
+#define MX35_INT_EXT_SENSOR60	60
+#define MX35_INT_EXT_SENSOR61	61
+#define MX35_INT_EXT_WDOG	62
+#define MX35_INT_EXT_TV		63
+
+#define MX35_PROD_SIGNATURE		0x1	/* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define MX35_CHIP_REV_1_0		0x10
+#define MX35_CHIP_REV_1_1		0x11
+#define MX35_CHIP_REV_1_2		0x12
+#define MX35_CHIP_REV_1_3		0x13
+#define MX35_CHIP_REV_2_0		0x20
+#define MX35_CHIP_REV_2_1		0x21
+#define MX35_CHIP_REV_2_2		0x22
+#define MX35_CHIP_REV_2_3		0x23
+#define MX35_CHIP_REV_3_0		0x30
+#define MX35_CHIP_REV_3_1		0x31
+#define MX35_CHIP_REV_3_2		0x32
+
+#define MX35_SYSTEM_REV_MIN		MX35_CHIP_REV_1_0
+#define MX35_SYSTEM_REV_NUM		3
 
+/* these should go away */
+#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
+#define MXC_INT_OWIRE MX35_INT_OWIRE
+#define MXC_INT_MMC_SDHC2 MX35_INT_MMC_SDHC2
+#define MXC_INT_MMC_SDHC3 MX35_INT_MMC_SDHC3
+#define MXC_INT_GPU2D MX35_INT_GPU2D
+#define MXC_INT_ASRC MX35_INT_ASRC
+#define MXC_INT_USBHS MX35_INT_USBHS
+#define MXC_INT_USBOTG MX35_INT_USBOTG
+#define MXC_INT_ESAI MX35_INT_ESAI
+#define MXC_INT_CAN1 MX35_INT_CAN1
+#define MXC_INT_CAN2 MX35_INT_CAN2
+#define MXC_INT_MLB MX35_INT_MLB
+#define MXC_INT_SPDIF MX35_INT_SPDIF
+#define MXC_INT_FEC MX35_INT_FEC
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 009f4440276b..be69272407ad 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -34,120 +34,117 @@
  *         	C0000000	64M	PCMCIA/CF
  */
 
-#define CS0_BASE_ADDR		0xA0000000
-#define CS1_BASE_ADDR		0xA8000000
-#define CS2_BASE_ADDR		0xB0000000
-#define CS3_BASE_ADDR		0xB2000000
-
-#define CS4_BASE_ADDR		0xB4000000
-#define CS4_BASE_ADDR_VIRT	0xF4000000
-#define CS4_SIZE		SZ_32M
-
-#define CS5_BASE_ADDR		0xB6000000
-#define CS5_BASE_ADDR_VIRT	0xF6000000
-#define CS5_SIZE		SZ_32M
-
-#define PCMCIA_MEM_BASE_ADDR	0xBC000000
-
 /*
  * L2CC
  */
-#define L2CC_BASE_ADDR		0x30000000
-#define L2CC_SIZE		SZ_1M
+#define MX3x_L2CC_BASE_ADDR		0x30000000
+#define MX3x_L2CC_SIZE			SZ_1M
 
 /*
  * AIPS 1
  */
-#define AIPS1_BASE_ADDR		0x43F00000
-#define AIPS1_BASE_ADDR_VIRT	0xFC000000
-#define AIPS1_SIZE		SZ_1M
-
-#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
-#define EVTMON_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
-#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
-#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
-#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00014000)
-#define ECT_CTIO_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00018000)
-#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
-#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
-#define UART1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00090000)
-#define UART2_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00094000)
-#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
-#define OWIRE_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x0009C000)
-#define SSI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
-#define CSPI1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000A4000)
-#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
-#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
-#define ECT_IP1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
-#define ECT_IP2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
+#define MX3x_AIPS1_BASE_ADDR		0x43f00000
+#define MX3x_AIPS1_BASE_ADDR_VIRT	0xfc000000
+#define MX3x_AIPS1_SIZE			SZ_1M
+#define MX3x_MAX_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x04000)
+#define MX3x_EVTMON_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x08000)
+#define MX3x_CLKCTL_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x0c000)
+#define MX3x_ETB_SLOT4_BASE_ADDR		(MX3x_AIPS1_BASE_ADDR + 0x10000)
+#define MX3x_ETB_SLOT5_BASE_ADDR		(MX3x_AIPS1_BASE_ADDR + 0x14000)
+#define MX3x_ECT_CTIO_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x18000)
+#define MX3x_I2C_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x80000)
+#define MX3x_I2C3_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x84000)
+#define MX3x_UART1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x90000)
+#define MX3x_UART2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x94000)
+#define MX3x_I2C2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x98000)
+#define MX3x_OWIRE_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x9c000)
+#define MX3x_SSI1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa0000)
+#define MX3x_CSPI1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa4000)
+#define MX3x_KPP_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa8000)
+#define MX3x_IOMUXC_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xac000)
+#define MX3x_ECT_IP1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xb8000)
+#define MX3x_ECT_IP2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xbc000)
 
 /*
  * SPBA global module enabled #0
  */
-#define SPBA0_BASE_ADDR 	0x50000000
-#define SPBA0_BASE_ADDR_VIRT	0xFC100000
-#define SPBA0_SIZE		SZ_1M
-
-#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
-#define CSPI2_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
-#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
-#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
-#define MSHC1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
-#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
+#define MX3x_SPBA0_BASE_ADDR		0x50000000
+#define MX3x_SPBA0_BASE_ADDR_VIRT	0xfc100000
+#define MX3x_SPBA0_SIZE			SZ_1M
+#define MX3x_UART3_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x0c000)
+#define MX3x_CSPI2_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x10000)
+#define MX3x_SSI2_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x14000)
+#define MX3x_ATA_DMA_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x20000)
+#define MX3x_MSHC1_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x24000)
+#define MX3x_SPBA_CTRL_BASE_ADDR		(MX3x_SPBA0_BASE_ADDR + 0x3c000)
 
 /*
  * AIPS 2
  */
-#define AIPS2_BASE_ADDR		0x53F00000
-#define AIPS2_BASE_ADDR_VIRT	0xFC200000
-#define AIPS2_SIZE		SZ_1M
-#define CCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
-#define GPT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00090000)
-#define EPIT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00094000)
-#define EPIT2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
-#define GPIO3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A4000)
-#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
-#define RNGA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
-#define IPU_CTRL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
-#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C4000)
-#define GPIO1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
-#define GPIO2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D0000)
-#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
-#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
-#define WDOG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DC000)
-#define PWM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
-#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
+#define MX3x_AIPS2_BASE_ADDR		0x53f00000
+#define MX3x_AIPS2_BASE_ADDR_VIRT	0xfc200000
+#define MX3x_AIPS2_SIZE			SZ_1M
+#define MX3x_CCM_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x80000)
+#define MX3x_GPT1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x90000)
+#define MX3x_EPIT1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x94000)
+#define MX3x_EPIT2_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x98000)
+#define MX3x_GPIO3_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xa4000)
+#define MX3x_SCC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xac000)
+#define MX3x_RNGA_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xb0000)
+#define MX3x_IPU_CTRL_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xc0000)
+#define MX3x_AUDMUX_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xc4000)
+#define MX3x_GPIO1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xcc000)
+#define MX3x_GPIO2_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd0000)
+#define MX3x_SDMA_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd4000)
+#define MX3x_RTC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd8000)
+#define MX3x_WDOG_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xdc000)
+#define MX3x_PWM_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xe0000)
+#define MX3x_RTIC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xec000)
 
 /*
  * ROMP and AVIC
  */
-#define ROMP_BASE_ADDR		0x60000000
-#define ROMP_BASE_ADDR_VIRT	0xFC500000
-#define ROMP_SIZE		SZ_1M
+#define MX3x_ROMP_BASE_ADDR		0x60000000
+#define MX3x_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX3x_ROMP_SIZE			SZ_1M
 
-#define AVIC_BASE_ADDR		0x68000000
-#define AVIC_BASE_ADDR_VIRT	0xFC400000
-#define AVIC_SIZE		SZ_1M
+#define MX3x_AVIC_BASE_ADDR		0x68000000
+#define MX3x_AVIC_BASE_ADDR_VIRT	0xfc400000
+#define MX3x_AVIC_SIZE			SZ_1M
 
 /*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ * Memory regions and CS
  */
-#define X_MEMC_BASE_ADDR	0xB8000000
-#define X_MEMC_BASE_ADDR_VIRT	0xFC320000
-#define X_MEMC_SIZE		SZ_64K
+#define MX3x_IPU_MEM_BASE_ADDR		0x70000000
+#define MX3x_CSD0_BASE_ADDR		0x80000000
+#define MX3x_CSD1_BASE_ADDR		0x90000000
 
-#define ESDCTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x3000)
-#define EMI_CTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x4000)
-#define PCMCIA_CTL_BASE_ADDR	EMI_CTL_BASE_ADDR
+#define MX3x_CS0_BASE_ADDR		0xa0000000
+#define MX3x_CS1_BASE_ADDR		0xa8000000
+#define MX3x_CS2_BASE_ADDR		0xb0000000
+#define MX3x_CS3_BASE_ADDR		0xb2000000
+
+#define MX3x_CS4_BASE_ADDR		0xb4000000
+#define MX3x_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX3x_CS4_SIZE			SZ_32M
+
+#define MX3x_CS5_BASE_ADDR		0xb6000000
+#define MX3x_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX3x_CS5_SIZE			SZ_32M
 
 /*
- * Memory regions and CS
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
  */
-#define IPU_MEM_BASE_ADDR	0x70000000
-#define CSD0_BASE_ADDR		0x80000000
-#define CSD1_BASE_ADDR		0x90000000
+#define MX3x_X_MEMC_BASE_ADDR		0xb8000000
+#define MX3x_X_MEMC_BASE_ADDR_VIRT	0xfc320000
+#define MX3x_X_MEMC_SIZE		SZ_64K
+#define MX3x_ESDCTL_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x1000)
+#define MX3x_WEIM_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x2000)
+#define MX3x_M3IF_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x3000)
+#define MX3x_EMI_CTL_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x4000)
+#define MX3x_PCMCIA_CTL_BASE_ADDR		MX3x_EMI_CTL_BASE_ADDR
+
+#define MX3x_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
 /*!
  * This macro defines the physical to virtual address mapping for all the
@@ -202,74 +199,207 @@
 /*
  * Interrupt numbers
  */
-#define MXC_INT_I2C3		3
-#define MXC_INT_I2C2		4
-#define MXC_INT_RTIC		6
-#define MXC_INT_I2C		10
-#define MXC_INT_CSPI2		13
-#define MXC_INT_CSPI1		14
-#define MXC_INT_ATA		15
-#define MXC_INT_UART3		18
-#define MXC_INT_IIM		19
-#define MXC_INT_RNGA		22
-#define MXC_INT_EVTMON		23
-#define MXC_INT_KPP		24
-#define MXC_INT_RTC		25
-#define MXC_INT_PWM		26
-#define MXC_INT_EPIT2		27
-#define MXC_INT_EPIT1		28
-#define MXC_INT_GPT		29
-#define MXC_INT_POWER_FAIL	30
-#define MXC_INT_UART2		32
-#define MXC_INT_NANDFC		33
-#define MXC_INT_SDMA		34
-#define MXC_INT_MSHC1		39
-#define MXC_INT_IPU_ERR		41
-#define MXC_INT_IPU_SYN		42
-#define MXC_INT_UART1		45
-#define MXC_INT_ECT		48
-#define MXC_INT_SCC_SCM		49
-#define MXC_INT_SCC_SMN		50
-#define MXC_INT_GPIO2		51
-#define MXC_INT_GPIO1		52
-#define MXC_INT_WDOG		55
-#define MXC_INT_GPIO3		56
-#define MXC_INT_EXT_POWER	58
-#define MXC_INT_EXT_TEMPER	59
-#define MXC_INT_EXT_SENSOR60	60
-#define MXC_INT_EXT_SENSOR61	61
-#define MXC_INT_EXT_WDOG	62
-#define MXC_INT_EXT_TV		63
-
-#define PROD_SIGNATURE		0x1	/* For MX31 */
+#define MX3x_INT_I2C3		3
+#define MX3x_INT_I2C2		4
+#define MX3x_INT_RTIC		6
+#define MX3x_INT_I2C		10
+#define MX3x_INT_CSPI2		13
+#define MX3x_INT_CSPI1		14
+#define MX3x_INT_ATA		15
+#define MX3x_INT_UART3		18
+#define MX3x_INT_IIM		19
+#define MX3x_INT_RNGA		22
+#define MX3x_INT_EVTMON		23
+#define MX3x_INT_KPP		24
+#define MX3x_INT_RTC		25
+#define MX3x_INT_PWM		26
+#define MX3x_INT_EPIT2		27
+#define MX3x_INT_EPIT1		28
+#define MX3x_INT_GPT		29
+#define MX3x_INT_POWER_FAIL	30
+#define MX3x_INT_UART2		32
+#define MX3x_INT_NANDFC		33
+#define MX3x_INT_SDMA		34
+#define MX3x_INT_MSHC1		39
+#define MX3x_INT_IPU_ERR	41
+#define MX3x_INT_IPU_SYN	42
+#define MX3x_INT_UART1		45
+#define MX3x_INT_ECT		48
+#define MX3x_INT_SCC_SCM	49
+#define MX3x_INT_SCC_SMN	50
+#define MX3x_INT_GPIO2		51
+#define MX3x_INT_GPIO1		52
+#define MX3x_INT_WDOG		55
+#define MX3x_INT_GPIO3		56
+#define MX3x_INT_EXT_POWER	58
+#define MX3x_INT_EXT_TEMPER	59
+#define MX3x_INT_EXT_SENSOR60	60
+#define MX3x_INT_EXT_SENSOR61	61
+#define MX3x_INT_EXT_WDOG	62
+#define MX3x_INT_EXT_TV		63
+
+#define MX3x_PROD_SIGNATURE		0x1	/* For MX31 */
 
 /* silicon revisions specific to i.MX31 */
-#define CHIP_REV_1_0		0x10
-#define CHIP_REV_1_1		0x11
-#define CHIP_REV_1_2		0x12
-#define CHIP_REV_1_3		0x13
-#define CHIP_REV_2_0		0x20
-#define CHIP_REV_2_1		0x21
-#define CHIP_REV_2_2		0x22
-#define CHIP_REV_2_3		0x23
-#define CHIP_REV_3_0		0x30
-#define CHIP_REV_3_1		0x31
-#define CHIP_REV_3_2		0x32
-
-#define SYSTEM_REV_MIN		CHIP_REV_1_0
-#define SYSTEM_REV_NUM		3
+#define MX3x_CHIP_REV_1_0		0x10
+#define MX3x_CHIP_REV_1_1		0x11
+#define MX3x_CHIP_REV_1_2		0x12
+#define MX3x_CHIP_REV_1_3		0x13
+#define MX3x_CHIP_REV_2_0		0x20
+#define MX3x_CHIP_REV_2_1		0x21
+#define MX3x_CHIP_REV_2_2		0x22
+#define MX3x_CHIP_REV_2_3		0x23
+#define MX3x_CHIP_REV_3_0		0x30
+#define MX3x_CHIP_REV_3_1		0x31
+#define MX3x_CHIP_REV_3_2		0x32
+
+#define MX3x_SYSTEM_REV_MIN		MX3x_CHIP_REV_1_0
+#define MX3x_SYSTEM_REV_NUM		3
 
 /* Mandatory defines used globally */
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 
-extern unsigned int system_rev;
+extern unsigned int mx31_cpu_rev;
+extern void mx31_read_cpu_rev(void);
 
 static inline int mx31_revision(void)
 {
-	return system_rev;
+	return mx31_cpu_rev;
 }
 #endif
 
-#endif /*  __ASM_ARCH_MXC_MX31_H__ */
+/* these should go away */
+#define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
+#define L2CC_SIZE MX3x_L2CC_SIZE
+#define AIPS1_BASE_ADDR MX3x_AIPS1_BASE_ADDR
+#define AIPS1_BASE_ADDR_VIRT MX3x_AIPS1_BASE_ADDR_VIRT
+#define AIPS1_SIZE MX3x_AIPS1_SIZE
+#define MAX_BASE_ADDR MX3x_MAX_BASE_ADDR
+#define EVTMON_BASE_ADDR MX3x_EVTMON_BASE_ADDR
+#define CLKCTL_BASE_ADDR MX3x_CLKCTL_BASE_ADDR
+#define ETB_SLOT4_BASE_ADDR MX3x_ETB_SLOT4_BASE_ADDR
+#define ETB_SLOT5_BASE_ADDR MX3x_ETB_SLOT5_BASE_ADDR
+#define ECT_CTIO_BASE_ADDR MX3x_ECT_CTIO_BASE_ADDR
+#define I2C_BASE_ADDR MX3x_I2C_BASE_ADDR
+#define I2C3_BASE_ADDR MX3x_I2C3_BASE_ADDR
+#define UART1_BASE_ADDR MX3x_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX3x_UART2_BASE_ADDR
+#define I2C2_BASE_ADDR MX3x_I2C2_BASE_ADDR
+#define OWIRE_BASE_ADDR MX3x_OWIRE_BASE_ADDR
+#define SSI1_BASE_ADDR MX3x_SSI1_BASE_ADDR
+#define CSPI1_BASE_ADDR MX3x_CSPI1_BASE_ADDR
+#define KPP_BASE_ADDR MX3x_KPP_BASE_ADDR
+#define IOMUXC_BASE_ADDR MX3x_IOMUXC_BASE_ADDR
+#define ECT_IP1_BASE_ADDR MX3x_ECT_IP1_BASE_ADDR
+#define ECT_IP2_BASE_ADDR MX3x_ECT_IP2_BASE_ADDR
+#define SPBA0_BASE_ADDR MX3x_SPBA0_BASE_ADDR
+#define SPBA0_BASE_ADDR_VIRT MX3x_SPBA0_BASE_ADDR_VIRT
+#define SPBA0_SIZE MX3x_SPBA0_SIZE
+#define UART3_BASE_ADDR MX3x_UART3_BASE_ADDR
+#define CSPI2_BASE_ADDR MX3x_CSPI2_BASE_ADDR
+#define SSI2_BASE_ADDR MX3x_SSI2_BASE_ADDR
+#define ATA_DMA_BASE_ADDR MX3x_ATA_DMA_BASE_ADDR
+#define MSHC1_BASE_ADDR MX3x_MSHC1_BASE_ADDR
+#define SPBA_CTRL_BASE_ADDR MX3x_SPBA_CTRL_BASE_ADDR
+#define AIPS2_BASE_ADDR MX3x_AIPS2_BASE_ADDR
+#define AIPS2_BASE_ADDR_VIRT MX3x_AIPS2_BASE_ADDR_VIRT
+#define AIPS2_SIZE MX3x_AIPS2_SIZE
+#define CCM_BASE_ADDR MX3x_CCM_BASE_ADDR
+#define GPT1_BASE_ADDR MX3x_GPT1_BASE_ADDR
+#define EPIT1_BASE_ADDR MX3x_EPIT1_BASE_ADDR
+#define EPIT2_BASE_ADDR MX3x_EPIT2_BASE_ADDR
+#define GPIO3_BASE_ADDR MX3x_GPIO3_BASE_ADDR
+#define SCC_BASE_ADDR MX3x_SCC_BASE_ADDR
+#define RNGA_BASE_ADDR MX3x_RNGA_BASE_ADDR
+#define IPU_CTRL_BASE_ADDR MX3x_IPU_CTRL_BASE_ADDR
+#define AUDMUX_BASE_ADDR MX3x_AUDMUX_BASE_ADDR
+#define GPIO1_BASE_ADDR MX3x_GPIO1_BASE_ADDR
+#define GPIO2_BASE_ADDR MX3x_GPIO2_BASE_ADDR
+#define SDMA_BASE_ADDR MX3x_SDMA_BASE_ADDR
+#define RTC_BASE_ADDR MX3x_RTC_BASE_ADDR
+#define WDOG_BASE_ADDR MX3x_WDOG_BASE_ADDR
+#define PWM_BASE_ADDR MX3x_PWM_BASE_ADDR
+#define RTIC_BASE_ADDR MX3x_RTIC_BASE_ADDR
+#define ROMP_BASE_ADDR MX3x_ROMP_BASE_ADDR
+#define ROMP_BASE_ADDR_VIRT MX3x_ROMP_BASE_ADDR_VIRT
+#define ROMP_SIZE MX3x_ROMP_SIZE
+#define AVIC_BASE_ADDR MX3x_AVIC_BASE_ADDR
+#define AVIC_BASE_ADDR_VIRT MX3x_AVIC_BASE_ADDR_VIRT
+#define AVIC_SIZE MX3x_AVIC_SIZE
+#define IPU_MEM_BASE_ADDR MX3x_IPU_MEM_BASE_ADDR
+#define CSD0_BASE_ADDR MX3x_CSD0_BASE_ADDR
+#define CSD1_BASE_ADDR MX3x_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX3x_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX3x_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX3x_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX3x_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX3x_CS4_BASE_ADDR
+#define CS4_BASE_ADDR_VIRT MX3x_CS4_BASE_ADDR_VIRT
+#define CS4_SIZE MX3x_CS4_SIZE
+#define CS5_BASE_ADDR MX3x_CS5_BASE_ADDR
+#define CS5_BASE_ADDR_VIRT MX3x_CS5_BASE_ADDR_VIRT
+#define CS5_SIZE MX3x_CS5_SIZE
+#define X_MEMC_BASE_ADDR MX3x_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX3x_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX3x_X_MEMC_SIZE
+#define ESDCTL_BASE_ADDR MX3x_ESDCTL_BASE_ADDR
+#define WEIM_BASE_ADDR MX3x_WEIM_BASE_ADDR
+#define M3IF_BASE_ADDR MX3x_M3IF_BASE_ADDR
+#define EMI_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX3x_PCMCIA_CTL_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX3x_PCMCIA_MEM_BASE_ADDR
+#define MXC_INT_I2C3 MX3x_INT_I2C3
+#define MXC_INT_I2C2 MX3x_INT_I2C2
+#define MXC_INT_RTIC MX3x_INT_RTIC
+#define MXC_INT_I2C MX3x_INT_I2C
+#define MXC_INT_CSPI2 MX3x_INT_CSPI2
+#define MXC_INT_CSPI1 MX3x_INT_CSPI1
+#define MXC_INT_ATA MX3x_INT_ATA
+#define MXC_INT_UART3 MX3x_INT_UART3
+#define MXC_INT_IIM MX3x_INT_IIM
+#define MXC_INT_RNGA MX3x_INT_RNGA
+#define MXC_INT_EVTMON MX3x_INT_EVTMON
+#define MXC_INT_KPP MX3x_INT_KPP
+#define MXC_INT_RTC MX3x_INT_RTC
+#define MXC_INT_PWM MX3x_INT_PWM
+#define MXC_INT_EPIT2 MX3x_INT_EPIT2
+#define MXC_INT_EPIT1 MX3x_INT_EPIT1
+#define MXC_INT_GPT MX3x_INT_GPT
+#define MXC_INT_POWER_FAIL MX3x_INT_POWER_FAIL
+#define MXC_INT_UART2 MX3x_INT_UART2
+#define MXC_INT_NANDFC MX3x_INT_NANDFC
+#define MXC_INT_SDMA MX3x_INT_SDMA
+#define MXC_INT_MSHC1 MX3x_INT_MSHC1
+#define MXC_INT_IPU_ERR MX3x_INT_IPU_ERR
+#define MXC_INT_IPU_SYN MX3x_INT_IPU_SYN
+#define MXC_INT_UART1 MX3x_INT_UART1
+#define MXC_INT_ECT MX3x_INT_ECT
+#define MXC_INT_SCC_SCM MX3x_INT_SCC_SCM
+#define MXC_INT_SCC_SMN MX3x_INT_SCC_SMN
+#define MXC_INT_GPIO2 MX3x_INT_GPIO2
+#define MXC_INT_GPIO1 MX3x_INT_GPIO1
+#define MXC_INT_WDOG MX3x_INT_WDOG
+#define MXC_INT_GPIO3 MX3x_INT_GPIO3
+#define MXC_INT_EXT_POWER MX3x_INT_EXT_POWER
+#define MXC_INT_EXT_TEMPER MX3x_INT_EXT_TEMPER
+#define MXC_INT_EXT_SENSOR60 MX3x_INT_EXT_SENSOR60
+#define MXC_INT_EXT_SENSOR61 MX3x_INT_EXT_SENSOR61
+#define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG
+#define MXC_INT_EXT_TV MX3x_INT_EXT_TV
+#define PROD_SIGNATURE MX3x_PROD_SIGNATURE
+#define CHIP_REV_1_0 MX3x_CHIP_REV_1_0
+#define CHIP_REV_1_1 MX3x_CHIP_REV_1_1
+#define CHIP_REV_1_2 MX3x_CHIP_REV_1_2
+#define CHIP_REV_1_3 MX3x_CHIP_REV_1_3
+#define CHIP_REV_2_0 MX3x_CHIP_REV_2_0
+#define CHIP_REV_2_1 MX3x_CHIP_REV_2_1
+#define CHIP_REV_2_2 MX3x_CHIP_REV_2_2
+#define CHIP_REV_2_3 MX3x_CHIP_REV_2_3
+#define CHIP_REV_3_0 MX3x_CHIP_REV_3_0
+#define CHIP_REV_3_1 MX3x_CHIP_REV_3_1
+#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
+#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
+#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
 
+#endif /*  __ASM_ARCH_MXC_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
new file mode 100644
index 000000000000..8f796239393e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -0,0 +1,37 @@
+#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
+#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND	(1 << 23)
+#define MXC_EHCI_FORCE_FS		(1 << 24)
+#define MXC_EHCI_UTMI_8BIT		(0 << 28)
+#define MXC_EHCI_UTMI_16BIT		(1 << 28)
+#define MXC_EHCI_SERIAL			(1 << 29)
+#define MXC_EHCI_MODE_UTMI		(0 << 30)
+#define MXC_EHCI_MODE_PHILIPS		(1 << 30)
+#define MXC_EHCI_MODE_ULPI		(2 << 30)
+#define MXC_EHCI_MODE_SERIAL		(3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI	(1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI	(3 << 0)
+#define MXC_EHCI_INTERFACE_MASK		(0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
+#define MXC_EHCI_TTL_ENABLED		(1 << 6)
+
+struct mxc_usbh_platform_data {
+	int (*init)(struct platform_device *pdev);
+	int (*exit)(struct platform_device *pdev);
+
+	unsigned int		 portsc;
+	unsigned int		 flags;
+	struct otg_transceiver	*otg;
+};
+
+int mxc_set_usbcontrol(int port, unsigned int flags);
+
+#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h
new file mode 100644
index 000000000000..96b6ab4c40c3
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ulpi.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_ULPI_H
+#define __MACH_ULPI_H
+
+extern struct otg_io_access_ops mxc_ulpi_access_ops;
+
+#endif /* __MACH_ULPI_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 082a3908256b..4d5d395ad63b 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -83,6 +83,8 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_MX27ADS:
 	case MACH_TYPE_PCM038:
 	case MACH_TYPE_MX21ADS:
+	case MACH_TYPE_PCA100:
+	case MACH_TYPE_MXT_TD60:
 		uart_base = MX2X_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MX31LITE:
@@ -94,6 +96,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_MX31ADS:
 	case MACH_TYPE_MX35_3DS:
 	case MACH_TYPE_PCM043:
+	case MACH_TYPE_LILLY1131:
 		uart_base = MX3X_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MAGX_ZN5:
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index 851ca99bf1b1..b318c6a222d5 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -31,19 +31,11 @@
 
 static void __iomem *base;
 
-static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
-
 /*
- * setups a single pin:
- * 	- reserves the pin so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
+ * setups a single pad in the iomuxer
  */
 int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
 {
-	unsigned int pad_ofs = pad->pad_ctrl_ofs;
-
-	if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
-		return -EBUSY;
 	if (pad->mux_ctrl_ofs)
 		__raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
 
@@ -66,37 +58,13 @@ int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
 	for (i = 0; i < count; i++) {
 		ret = mxc_iomux_v3_setup_pad(p);
 		if (ret)
-			goto setup_error;
+			return ret;
 		p++;
 	}
 	return 0;
-
-setup_error:
-	mxc_iomux_v3_release_multiple_pads(pad_list, i);
-	return ret;
 }
 EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
 
-void mxc_iomux_v3_release_pad(struct pad_desc *pad)
-{
-	unsigned int pad_ofs = pad->pad_ctrl_ofs;
-
-	clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
-
-void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
-{
-	struct pad_desc *p = pad_list;
-	int i;
-
-	for (i = 0; i < count; i++) {
-		mxc_iomux_v3_release_pad(p);
-		p++;
-	}
-}
-EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
-
 void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
 {
 	base = iomux_v3_base;
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 5cdbd605ac05..4ff6dfe04283 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -94,7 +94,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 		 * register to follow the ratio of duty_ns vs. period_ns
 		 * accordingly.
 		 *
-		 * This is good enought for programming the brightness of
+		 * This is good enough for programming the brightness of
 		 * the LCD backlight.
 		 *
 		 * The real implementation would divide PERCLK[0] first by
diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c
new file mode 100644
index 000000000000..582c6dfaba4a
--- /dev/null
+++ b/arch/arm/plat-mxc/ulpi.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ * Copyright 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/otg.h>
+
+#include <mach/ulpi.h>
+
+/* ULPIVIEW register bits */
+#define ULPIVW_WU		(1 << 31)	/* Wakeup */
+#define ULPIVW_RUN		(1 << 30)	/* read/write run */
+#define ULPIVW_WRITE		(1 << 29)	/* 0 = read  1 = write */
+#define ULPIVW_SS		(1 << 27)	/* SyncState */
+#define ULPIVW_PORT_MASK	0x07	/* Port field */
+#define ULPIVW_PORT_SHIFT	24
+#define ULPIVW_ADDR_MASK	0xff	/* data address field */
+#define ULPIVW_ADDR_SHIFT	16
+#define ULPIVW_RDATA_MASK	0xff	/* read data field */
+#define ULPIVW_RDATA_SHIFT	8
+#define ULPIVW_WDATA_MASK	0xff	/* write data field */
+#define ULPIVW_WDATA_SHIFT	0
+
+static int ulpi_poll(void __iomem *view, u32 bit)
+{
+	int timeout = 10000;
+
+	while (timeout--) {
+		u32 data = __raw_readl(view);
+
+		if (!(data & bit))
+			return 0;
+
+		cpu_relax();
+	};
+
+	printk(KERN_WARNING "timeout polling for ULPI device\n");
+
+	return -ETIMEDOUT;
+}
+
+static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+	int ret;
+	void __iomem *view = otg->io_priv;
+
+	/* make sure interface is running */
+	if (!(__raw_readl(view) & ULPIVW_SS)) {
+		__raw_writel(ULPIVW_WU, view);
+
+		/* wait for wakeup */
+		ret = ulpi_poll(view, ULPIVW_WU);
+		if (ret)
+			return ret;
+	}
+
+	/* read the register */
+	__raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view);
+
+	/* wait for completion */
+	ret = ulpi_poll(view, ULPIVW_RUN);
+	if (ret)
+		return ret;
+
+	return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
+}
+
+static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+	int ret;
+	void __iomem *view = otg->io_priv;
+
+	/* make sure the interface is running */
+	if (!(__raw_readl(view) & ULPIVW_SS)) {
+		__raw_writel(ULPIVW_WU, view);
+		/* wait for wakeup */
+		ret = ulpi_poll(view, ULPIVW_WU);
+		if (ret)
+			return ret;
+	}
+
+	__raw_writel((ULPIVW_RUN | ULPIVW_WRITE |
+		      (reg << ULPIVW_ADDR_SHIFT) |
+		      ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view);
+
+	/* wait for completion */
+	return ulpi_poll(view, ULPIVW_RUN);
+}
+
+struct otg_io_access_ops mxc_ulpi_access_ops = {
+	.read	= ulpi_read,
+	.write	= ulpi_write,
+};
+EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
+
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
new file mode 100644
index 000000000000..159daf583f85
--- /dev/null
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -0,0 +1,22 @@
+# We keep common IP's here for Nomadik and other similar
+# familiy of processors from ST-Ericsson. At the moment we have
+# just MTU, others to follow soon.
+
+config PLAT_NOMADIK
+	bool
+	depends on ARCH_NOMADIK || ARCH_U8500
+	default y
+	help
+	  Common platform code for Nomadik and other ST-Ericsson
+	  platforms.
+
+if PLAT_NOMADIK
+
+config HAS_MTU
+	bool
+	help
+	  Support for Multi Timer Unit. MTU provides access
+	  to multiple interrupt generating programmable
+	  32-bit free running decrementing counters.
+
+endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
new file mode 100644
index 000000000000..37c7cdd0f8f0
--- /dev/null
+++ b/arch/arm/plat-nomadik/Makefile
@@ -0,0 +1,5 @@
+# arch/arm/plat-nomadik/Makefile
+# Copyright 2009 ST-Ericsson
+# Licensed under GPLv2
+
+obj-$(CONFIG_HAS_MTU)	+= timer.o
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
index 76da7f085330..42c907258b14 100644
--- a/arch/arm/mach-nomadik/include/mach/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,5 +1,8 @@
-#ifndef __ASM_ARCH_MTU_H
-#define __ASM_ARCH_MTU_H
+#ifndef __PLAT_MTU_H
+#define __PLAT_MTU_H
+
+/* should be set by the platform code */
+extern void __iomem *mtu_base;
 
 /*
  * The MTU device hosts four different counters, with 4 set of
@@ -41,5 +44,5 @@
 #define MTU_PCELL2	0xff8
 #define MTU_PCELL3	0xffC
 
-#endif /* __ASM_ARCH_MTU_H */
+#endif /* __PLAT_MTU_H */
 
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index d1738e7061d4..62f18ad43a28 100644
--- a/arch/arm/mach-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -15,19 +15,14 @@
 #include <linux/clockchips.h>
 #include <linux/jiffies.h>
 #include <asm/mach/time.h>
-#include <mach/mtu.h>
 
-#define TIMER_CTRL	0x80	/* No divisor */
-#define TIMER_PERIODIC	0x40
-#define TIMER_SZ32BIT	0x02
-
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK	0x00007fff
-#define SRC_CR_INIT_VAL		0x2aaa8000
+#include <plat/mtu.h>
 
 static u32	nmdk_count;		/* accumulated count */
 static u32	nmdk_cycle;		/* write-once */
-static __iomem void *mtu_base;
+
+/* setup by the platform code */
+void __iomem *mtu_base;
 
 /*
  * clocksource: the MTU device is a decrementing counters, so we negate
@@ -93,7 +88,7 @@ static struct clock_event_device nmdk_clkevt = {
 static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
 {
 	/* ack: "interrupt clear register" */
-	writel( 1 << 0, mtu_base + MTU_ICR);
+	writel(1 << 0, mtu_base + MTU_ICR);
 
 	/* we can't count lost ticks, unfortunately */
 	nmdk_count += nmdk_cycle;
@@ -125,24 +120,14 @@ static void nmdk_timer_reset(void)
 	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 }
 
-static void __init nmdk_timer_init(void)
+void __init nmdk_timer_init(void)
 {
-	u32 src_cr;
 	unsigned long rate;
 	int bits;
 
 	rate = CLOCK_TICK_RATE; /* 2.4MHz */
 	nmdk_cycle = (rate + HZ/2) / HZ;
 
-	/* Configure timer sources in "system reset controller" ctrl reg */
-	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
-	src_cr &= SRC_CR_INIT_MASK;
-	src_cr |= SRC_CR_INIT_VAL;
-	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
-
-	/* Save global pointer to mtu, used by functions above */
-	mtu_base = io_p2v(NOMADIK_MTU0_BASE);
-
 	/* Init the timer and register clocksource */
 	nmdk_timer_reset();
 
@@ -150,7 +135,9 @@ static void __init nmdk_timer_init(void)
 	bits =  8*sizeof(nmdk_count);
 	nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
 
-	clocksource_register(&nmdk_clksrc);
+	if (clocksource_register(&nmdk_clksrc))
+		printk(KERN_ERR "timer: failed to initialize clock "
+			"source %s\n", nmdk_clksrc.name);
 
 	/* Register irq and clockevents */
 	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
@@ -158,7 +145,3 @@ static void __init nmdk_timer_init(void)
 	nmdk_clkevt.cpumask = cpumask_of(0);
 	clockevents_register_device(&nmdk_clkevt);
 }
-
-struct sys_timer nomadik_timer = {
-	.init		= nmdk_timer_init,
-};
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 64b3f52bd9b2..e2ea04a4c8a1 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -27,6 +27,7 @@ config ARCH_OMAP4
 	bool "TI OMAP4"
 	select CPU_V7
 	select ARM_GIC
+	select COMMON_CLKDEV
 
 endchoice
 
@@ -42,28 +43,6 @@ config OMAP_DEBUG_LEDS
 	depends on OMAP_DEBUG_DEVICES
 	default y if LEDS || LEDS_OMAP_DEBUG
 
-config OMAP_DEBUG_POWERDOMAIN
-	bool "Emit debug messages from powerdomain layer"
-	depends on ARCH_OMAP2 || ARCH_OMAP3
-	help
-	  Say Y here if you want to compile in powerdomain layer
-	  debugging messages for OMAP2/3.   These messages can
-	  provide more detail as to why some powerdomain calls
-	  may be failing, and will also emit a descriptive message
-	  for every powerdomain register write.  However, the
-	  extra detail costs some memory.
-
-config OMAP_DEBUG_CLOCKDOMAIN
-	bool "Emit debug messages from clockdomain layer"
-	depends on ARCH_OMAP2 || ARCH_OMAP3
-	help
-	  Say Y here if you want to compile in clockdomain layer
-	  debugging messages for OMAP2/3.   These messages can
-	  provide more detail as to why some clockdomain calls
-	  may be failing, and will also emit a descriptive message
-	  for every clockdomain register write.  However, the
-	  extra detail costs some memory.
-
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
 	depends on ARCH_OMAP
@@ -78,28 +57,28 @@ config OMAP_RESET_CLOCKS
 
 config OMAP_MUX
 	bool "OMAP multiplexing support"
-        depends on ARCH_OMAP
+	depends on ARCH_OMAP
 	default y
-        help
-          Pin multiplexing support for OMAP boards. If your bootloader
-          sets the multiplexing correctly, say N. Otherwise, or if unsure,
-          say Y.
+	help
+	  Pin multiplexing support for OMAP boards. If your bootloader
+	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
+	  say Y.
 
 config OMAP_MUX_DEBUG
 	bool "Multiplexing debug output"
-        depends on OMAP_MUX
-        help
-          Makes the multiplexing functions print out a lot of debug info.
-          This is useful if you want to find out the correct values of the
-          multiplexing registers.
+	depends on OMAP_MUX
+	help
+	  Makes the multiplexing functions print out a lot of debug info.
+	  This is useful if you want to find out the correct values of the
+	  multiplexing registers.
 
 config OMAP_MUX_WARNINGS
 	bool "Warn about pins the bootloader didn't set up"
-        depends on OMAP_MUX
-        default y
-        help
+	depends on OMAP_MUX
+	default y
+	help
 	  Choose Y here to warn whenever driver initialization logic needs
-	  to change the pin multiplexing setup.  When there are no warnings
+	  to change the pin multiplexing setup.	 When there are no warnings
 	  printed, it's safe to deselect OMAP_MUX for your product.
 
 config OMAP_MCBSP
@@ -125,7 +104,7 @@ config OMAP_IOMMU_DEBUG
 	tristate
 
 choice
-        prompt "System timer"
+	prompt "System timer"
 	default OMAP_MPU_TIMER
 
 config OMAP_MPU_TIMER
@@ -148,11 +127,11 @@ config OMAP_32K_TIMER
 endchoice
 
 config OMAP_32K_TIMER_HZ
-       int "Kernel internal timer frequency for 32KHz timer"
-       range 32 1024
-       depends on OMAP_32K_TIMER
-       default "128"
-       help
+	int "Kernel internal timer frequency for 32KHz timer"
+	range 32 1024
+	depends on OMAP_32K_TIMER
+	default "128"
+	help
 	  Kernel internal timer frequency should be a divisor of 32768,
 	  such as 64 or 128.
 
@@ -165,7 +144,7 @@ config OMAP_DM_TIMER
 choice
 	prompt "Low-level debug console UART"
 	depends on ARCH_OMAP
-	default OMAP_LL_DEBUG_UART1
+	default OMAP_LL_DEBUG_NONE
 
 config OMAP_LL_DEBUG_UART1
 	bool "UART1"
@@ -176,6 +155,9 @@ config OMAP_LL_DEBUG_UART2
 config OMAP_LL_DEBUG_UART3
 	bool "UART3"
 
+config OMAP_LL_DEBUG_NONE
+	bool "None"
+
 endchoice
 
 config OMAP_SERIAL_WAKE
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index bf880e966d3b..89cafc937249 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -24,7 +24,7 @@
 #include <linux/debugfs.h>
 #include <linux/io.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
@@ -40,36 +40,10 @@ static struct clk_functions *arch_clock;
  * clock framework is not up , it is defined here to avoid rework in
  * every driver. Also dummy prcm reset function is added */
 
-/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */
-#if defined(CONFIG_ARCH_OMAP4)
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	return NULL;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-void omap2_clk_prepare_for_reboot(void)
-{
-}
-EXPORT_SYMBOL(omap2_clk_prepare_for_reboot);
-
-void omap_prcm_arch_reset(char mode)
-{
-}
-EXPORT_SYMBOL(omap_prcm_arch_reset);
-#endif
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 	int ret = 0;
-	if (cpu_is_omap44xx())
-		/* OMAP4 clk framework not supported yet */
-		return 0;
 
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 3a4768d55895..bf1eaf3a27d4 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -29,13 +29,13 @@
 #include <asm/mach/map.h>
 #include <asm/setup.h>
 
-#include <mach/common.h>
-#include <mach/board.h>
-#include <mach/control.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/control.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/sdrc.h"
@@ -49,6 +49,9 @@ int omap_bootloader_tag_len;
 struct omap_board_config_kernel *omap_board_config;
 int omap_board_config_size;
 
+/* used by omap-smp.c and board-4430sdp.c */
+void __iomem *gic_cpu_base_addr;
+
 static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 {
 	struct omap_board_config_kernel *kinfo = NULL;
@@ -224,12 +227,12 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 
 static struct omap_globals omap242x_globals = {
 	.class	= OMAP242X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x48014000),
-	.sdrc	= OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
-	.sms	= OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
 };
 
 void __init omap2_set_globals_242x(void)
@@ -242,12 +245,12 @@ void __init omap2_set_globals_242x(void)
 
 static struct omap_globals omap243x_globals = {
 	.class	= OMAP243X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x4900a000),
-	.sdrc	= OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
-	.sms	= OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
 };
 
 void __init omap2_set_globals_243x(void)
@@ -260,12 +263,12 @@ void __init omap2_set_globals_243x(void)
 
 static struct omap_globals omap343x_globals = {
 	.class	= OMAP343X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x4830A000),
-	.sdrc	= OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
-	.sms	= OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
 };
 
 void __init omap2_set_globals_343x(void)
@@ -277,16 +280,18 @@ void __init omap2_set_globals_343x(void)
 #if defined(CONFIG_ARCH_OMAP4)
 static struct omap_globals omap4_globals = {
 	.class	= OMAP443X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x4830a000),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
+	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
 };
 
 void __init omap2_set_globals_443x(void)
 {
 	omap2_set_globals_tap(&omap4_globals);
 	omap2_set_globals_control(&omap4_globals);
+	omap2_set_globals_prcm(&omap4_globals);
 }
 #endif
 
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 341235c278ac..f8ddbdd8b076 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/clock.h>
+#include <plat/clock.h>
 #include <asm/system.h>
 
 #define VERY_HI_RATE	900000000
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index f6684832ca8f..923c9621096b 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -13,10 +13,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 
-#include <mach/board.h>
+#include <plat/board.h>
 #include <mach/gpio.h>
 
 
@@ -24,6 +25,12 @@
  * platforms include H2, H3, H4, and Perseus2.
  */
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.flags  = IORESOURCE_MEM,
@@ -36,6 +43,9 @@ static struct resource smc91x_resources[] = {
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 };
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 9395898dd49a..6c768b71ad64 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -18,7 +18,7 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
 
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index a64b692a1bfe..30b5db73017a 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -19,15 +19,15 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/control.h>
-#include <mach/board.h>
-#include <mach/mmc.h>
-#include <mach/mux.h>
+#include <plat/tc.h>
+#include <plat/control.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/menelaus.h>
-#include <mach/mcbsp.h>
-#include <mach/dsp_common.h>
+#include <plat/menelaus.h>
+#include <plat/mcbsp.h>
+#include <plat/dsp_common.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
@@ -113,17 +113,17 @@ static void omap_init_kp(void)
 		omap_cfg_reg(E19_1610_KBR4);
 		omap_cfg_reg(N19_1610_KBR5);
 	} else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
-		omap_cfg_reg(E2_730_KBR0);
-		omap_cfg_reg(J7_730_KBR1);
-		omap_cfg_reg(E1_730_KBR2);
-		omap_cfg_reg(F3_730_KBR3);
-		omap_cfg_reg(D2_730_KBR4);
-
-		omap_cfg_reg(C2_730_KBC0);
-		omap_cfg_reg(D3_730_KBC1);
-		omap_cfg_reg(E4_730_KBC2);
-		omap_cfg_reg(F4_730_KBC3);
-		omap_cfg_reg(E3_730_KBC4);
+		omap_cfg_reg(E2_7XX_KBR0);
+		omap_cfg_reg(J7_7XX_KBR1);
+		omap_cfg_reg(E1_7XX_KBR2);
+		omap_cfg_reg(F3_7XX_KBR3);
+		omap_cfg_reg(D2_7XX_KBR4);
+
+		omap_cfg_reg(C2_7XX_KBC0);
+		omap_cfg_reg(D3_7XX_KBC1);
+		omap_cfg_reg(E4_7XX_KBC2);
+		omap_cfg_reg(F4_7XX_KBC3);
+		omap_cfg_reg(E3_7XX_KBC4);
 	} else if (machine_is_omap_h4()) {
 		omap_cfg_reg(T19_24XX_KBR0);
 		omap_cfg_reg(R19_24XX_KBR1);
@@ -242,6 +242,39 @@ fail:
 
 /*-------------------------------------------------------------------------*/
 
+#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define	OMAP_RNG_BASE		0x480A0000
+#else
+#define	OMAP_RNG_BASE		0xfffe5000
+#endif
+
+static struct resource rng_resources[] = {
+	{
+		.start		= OMAP_RNG_BASE,
+		.end		= OMAP_RNG_BASE + 0x4f,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_rng_device = {
+	.name		= "omap_rng",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rng_resources),
+	.resource	= rng_resources,
+};
+
+static void omap_init_rng(void)
+{
+	(void) platform_device_register(&omap_rng_device);
+}
+#else
+static inline void omap_init_rng(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 /* Numbering for the SPI-capable controllers when used for SPI:
  * spi		= 1
  * uwire	= 2
@@ -324,39 +357,6 @@ static void omap_init_wdt(void)
 static inline void omap_init_wdt(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
-
-#ifdef CONFIG_ARCH_OMAP24XX
-#define	OMAP_RNG_BASE		0x480A0000
-#else
-#define	OMAP_RNG_BASE		0xfffe5000
-#endif
-
-static struct resource rng_resources[] = {
-	{
-		.start		= OMAP_RNG_BASE,
-		.end		= OMAP_RNG_BASE + 0x4f,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_rng_device = {
-	.name	   = "omap_rng",
-	.id	     = -1,
-	.num_resources	= ARRAY_SIZE(rng_resources),
-	.resource	= rng_resources,
-};
-
-static void omap_init_rng(void)
-{
-	(void) platform_device_register(&omap_rng_device);
-}
-#else
-static inline void omap_init_rng(void) {}
-#endif
-
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
  * on-chip peripherals accessible on this board (except for few like USB):
@@ -384,9 +384,9 @@ static int __init omap_init_devices(void)
 	 */
 	omap_init_dsp();
 	omap_init_kp();
+	omap_init_rng();
 	omap_init_uwire();
 	omap_init_wdt();
-	omap_init_rng();
 	return 0;
 }
 arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 68eaae324b6a..09d82b3c66ce 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -32,9 +32,9 @@
 
 #include <asm/system.h>
 #include <mach/hardware.h>
-#include <mach/dma.h>
+#include <plat/dma.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 
 #undef DEBUG
 
@@ -47,13 +47,18 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
 #endif
 
 #define OMAP_DMA_ACTIVE			0x01
-#define OMAP_DMA_CCR_EN			(1 << 7)
 #define OMAP2_DMA_CSR_CLEAR_MASK	0xffe
 
 #define OMAP_FUNC_MUX_ARM_BASE		(0xfffe1000 + 0xec)
 
 static int enable_1510_mode;
 
+static struct omap_dma_global_context_registers {
+	u32 dma_irqenable_l0;
+	u32 dma_ocp_sysconfig;
+	u32 dma_gcr;
+} omap_dma_global_context;
+
 struct omap_dma_lch {
 	int next_lch;
 	int dev_id;
@@ -1114,17 +1119,8 @@ int omap_dma_running(void)
 {
 	int lch;
 
-	/*
-	 * On OMAP1510, internal LCD controller will start the transfer
-	 * when it gets enabled, so assume DMA running if LCD enabled.
-	 */
-	if (cpu_is_omap1510())
-		if (omap_readw(0xfffec000 + 0x00) & (1 << 0))
-			return 1;
-
-	/* Check if LCD DMA is running */
-	if (cpu_is_omap16xx())
-		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+	if (cpu_class_is_omap1())
+		if (omap_lcd_dma_running())
 			return 1;
 
 	for (lch = 0; lch < dma_chan_count; lch++)
@@ -1246,7 +1242,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
  * 					      OMAP_DMA_DYNAMIC_CHAIN
  * @params - Channel parameters
  *
- * @return - Succes : 0
+ * @return - Success : 0
  * 	     Failure: -EINVAL/-ENOMEM
  */
 int omap_request_dma_chain(int dev_id, const char *dev_name,
@@ -1984,415 +1980,83 @@ static struct irqaction omap24xx_dma_irq;
 
 /*----------------------------------------------------------------------------*/
 
-static struct lcd_dma_info {
-	spinlock_t lock;
-	int reserved;
-	void (*callback)(u16 status, void *data);
-	void *cb_data;
-
-	int active;
-	unsigned long addr, size;
-	int rotate, data_type, xres, yres;
-	int vxres;
-	int mirror;
-	int xscale, yscale;
-	int ext_ctrl;
-	int src_port;
-	int single_transfer;
-} lcd_dma;
-
-void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-			 int data_type)
-{
-	lcd_dma.addr = addr;
-	lcd_dma.data_type = data_type;
-	lcd_dma.xres = fb_xres;
-	lcd_dma.yres = fb_yres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1);
-
-void omap_set_lcd_dma_src_port(int port)
-{
-	lcd_dma.src_port = port;
-}
-
-void omap_set_lcd_dma_ext_controller(int external)
-{
-	lcd_dma.ext_ctrl = external;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
-
-void omap_set_lcd_dma_single_transfer(int single)
-{
-	lcd_dma.single_transfer = single;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
-
-void omap_set_lcd_dma_b1_rotation(int rotate)
-{
-	if (omap_dma_in_1510_mode()) {
-		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
-		BUG();
-		return;
-	}
-	lcd_dma.rotate = rotate;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
-
-void omap_set_lcd_dma_b1_mirror(int mirror)
-{
-	if (omap_dma_in_1510_mode()) {
-		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.mirror = mirror;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
-
-void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
-{
-	if (omap_dma_in_1510_mode()) {
-		printk(KERN_ERR "DMA virtual resulotion is not supported "
-				"in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.vxres = vxres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
-
-void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
-{
-	if (omap_dma_in_1510_mode()) {
-		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.xscale = xscale;
-	lcd_dma.yscale = yscale;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
-
-static void set_b1_regs(void)
-{
-	unsigned long top, bottom;
-	int es;
-	u16 w;
-	unsigned long en, fn;
-	long ei, fi;
-	unsigned long vxres;
-	unsigned int xscale, yscale;
-
-	switch (lcd_dma.data_type) {
-	case OMAP_DMA_DATA_TYPE_S8:
-		es = 1;
-		break;
-	case OMAP_DMA_DATA_TYPE_S16:
-		es = 2;
-		break;
-	case OMAP_DMA_DATA_TYPE_S32:
-		es = 4;
-		break;
-	default:
-		BUG();
-		return;
-	}
-
-	vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
-	xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
-	yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
-	BUG_ON(vxres < lcd_dma.xres);
-
-#define PIXADDR(x, y) (lcd_dma.addr +					\
-		((y) * vxres * yscale + (x) * xscale) * es)
-#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
-
-	switch (lcd_dma.rotate) {
-	case 0:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(0, 0);
-			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			/* 1510 DMA requires the bottom address to be 2 more
-			 * than the actual last memory access location. */
-			if (omap_dma_in_1510_mode() &&
-				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
-					bottom += 2;
-			ei = PIXSTEP(0, 0, 1, 0);
-			fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
-		} else {
-			top = PIXADDR(lcd_dma.xres - 1, 0);
-			bottom = PIXADDR(0, lcd_dma.yres - 1);
-			ei = PIXSTEP(1, 0, 0, 0);
-			fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
-		}
-		en = lcd_dma.xres;
-		fn = lcd_dma.yres;
-		break;
-	case 90:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(0, lcd_dma.yres - 1);
-			bottom = PIXADDR(lcd_dma.xres - 1, 0);
-			ei = PIXSTEP(0, 1, 0, 0);
-			fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
-		} else {
-			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			bottom = PIXADDR(0, 0);
-			ei = PIXSTEP(0, 1, 0, 0);
-			fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
-		}
-		en = lcd_dma.yres;
-		fn = lcd_dma.xres;
-		break;
-	case 180:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			bottom = PIXADDR(0, 0);
-			ei = PIXSTEP(1, 0, 0, 0);
-			fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
-		} else {
-			top = PIXADDR(0, lcd_dma.yres - 1);
-			bottom = PIXADDR(lcd_dma.xres - 1, 0);
-			ei = PIXSTEP(0, 0, 1, 0);
-			fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
-		}
-		en = lcd_dma.xres;
-		fn = lcd_dma.yres;
-		break;
-	case 270:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(lcd_dma.xres - 1, 0);
-			bottom = PIXADDR(0, lcd_dma.yres - 1);
-			ei = PIXSTEP(0, 0, 0, 1);
-			fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
-		} else {
-			top = PIXADDR(0, 0);
-			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			ei = PIXSTEP(0, 0, 0, 1);
-			fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
-		}
-		en = lcd_dma.yres;
-		fn = lcd_dma.xres;
-		break;
-	default:
-		BUG();
-		return;	/* Suppress warning about uninitialized vars */
-	}
-
-	if (omap_dma_in_1510_mode()) {
-		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
-		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
-		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
-		omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
-
-		return;
-	}
-
-	/* 1610 regs */
-	omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
-	omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
-	omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
-	omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
-
-	omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
-	omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CSDP);
-	w &= ~0x03;
-	w |= lcd_dma.data_type;
-	omap_writew(w, OMAP1610_DMA_LCD_CSDP);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	/* Always set the source port as SDRAM for now*/
-	w &= ~(0x03 << 6);
-	if (lcd_dma.callback != NULL)
-		w |= 1 << 1;		/* Block interrupt enable */
-	else
-		w &= ~(1 << 1);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
-	if (!(lcd_dma.rotate || lcd_dma.mirror ||
-	      lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	/* Set the double-indexed addressing mode */
-	w |= (0x03 << 12);
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
-	omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
-	omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
-}
-
-static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
+void omap_dma_global_context_save(void)
 {
-	u16 w;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	if (unlikely(!(w & (1 << 3)))) {
-		printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
-		return IRQ_NONE;
-	}
-	/* Ack the IRQ */
-	w |= (1 << 3);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-	lcd_dma.active = 0;
-	if (lcd_dma.callback != NULL)
-		lcd_dma.callback(w, lcd_dma.cb_data);
-
-	return IRQ_HANDLED;
-}
-
-int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-			 void *data)
-{
-	spin_lock_irq(&lcd_dma.lock);
-	if (lcd_dma.reserved) {
-		spin_unlock_irq(&lcd_dma.lock);
-		printk(KERN_ERR "LCD DMA channel already reserved\n");
-		BUG();
-		return -EBUSY;
-	}
-	lcd_dma.reserved = 1;
-	spin_unlock_irq(&lcd_dma.lock);
-	lcd_dma.callback = callback;
-	lcd_dma.cb_data = data;
-	lcd_dma.active = 0;
-	lcd_dma.single_transfer = 0;
-	lcd_dma.rotate = 0;
-	lcd_dma.vxres = 0;
-	lcd_dma.mirror = 0;
-	lcd_dma.xscale = 0;
-	lcd_dma.yscale = 0;
-	lcd_dma.ext_ctrl = 0;
-	lcd_dma.src_port = 0;
-
-	return 0;
+	omap_dma_global_context.dma_irqenable_l0 =
+		dma_read(IRQENABLE_L0);
+	omap_dma_global_context.dma_ocp_sysconfig =
+		dma_read(OCP_SYSCONFIG);
+	omap_dma_global_context.dma_gcr = dma_read(GCR);
 }
-EXPORT_SYMBOL(omap_request_lcd_dma);
 
-void omap_free_lcd_dma(void)
+void omap_dma_global_context_restore(void)
 {
-	spin_lock(&lcd_dma.lock);
-	if (!lcd_dma.reserved) {
-		spin_unlock(&lcd_dma.lock);
-		printk(KERN_ERR "LCD DMA is not reserved\n");
-		BUG();
-		return;
-	}
-	if (!enable_1510_mode)
-		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
-			    OMAP1610_DMA_LCD_CCR);
-	lcd_dma.reserved = 0;
-	spin_unlock(&lcd_dma.lock);
-}
-EXPORT_SYMBOL(omap_free_lcd_dma);
+	int ch;
 
-void omap_enable_lcd_dma(void)
-{
-	u16 w;
+	dma_write(omap_dma_global_context.dma_gcr, GCR);
+	dma_write(omap_dma_global_context.dma_ocp_sysconfig,
+		OCP_SYSCONFIG);
+	dma_write(omap_dma_global_context.dma_irqenable_l0,
+		IRQENABLE_L0);
 
 	/*
-	 * Set the Enable bit only if an external controller is
-	 * connected. Otherwise the OMAP internal controller will
-	 * start the transfer when it gets enabled.
+	 * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared
+	 * after secure sram context save and restore. Hence we need to
+	 * manually clear those IRQs to avoid spurious interrupts. This
+	 * affects only secure devices.
 	 */
-	if (enable_1510_mode || !lcd_dma.ext_ctrl)
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	w |= 1 << 8;
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
-	lcd_dma.active = 1;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	w |= 1 << 7;
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-}
-EXPORT_SYMBOL(omap_enable_lcd_dma);
-
-void omap_setup_lcd_dma(void)
-{
-	BUG_ON(lcd_dma.active);
-	if (!enable_1510_mode) {
-		/* Set some reasonable defaults */
-		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
-		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
-		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
-	}
-	set_b1_regs();
-	if (!enable_1510_mode) {
-		u16 w;
-
-		w = omap_readw(OMAP1610_DMA_LCD_CCR);
-		/*
-		 * If DMA was already active set the end_prog bit to have
-		 * the programmed register set loaded into the active
-		 * register set.
-		 */
-		w |= 1 << 11;		/* End_prog */
-		if (!lcd_dma.single_transfer)
-			w |= (3 << 8);	/* Auto_init, repeat */
-		omap_writew(w, OMAP1610_DMA_LCD_CCR);
-	}
-}
-EXPORT_SYMBOL(omap_setup_lcd_dma);
-
-void omap_stop_lcd_dma(void)
-{
-	u16 w;
+	if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+		dma_write(0x3 , IRQSTATUS_L0);
 
-	lcd_dma.active = 0;
-	if (enable_1510_mode || !lcd_dma.ext_ctrl)
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	w &= ~(1 << 7);
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	w &= ~(1 << 8);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+	for (ch = 0; ch < dma_chan_count; ch++)
+		if (dma_chan[ch].dev_id != -1)
+			omap_clear_dma(ch);
 }
-EXPORT_SYMBOL(omap_stop_lcd_dma);
 
 /*----------------------------------------------------------------------------*/
 
 static int __init omap_init_dma(void)
 {
+	unsigned long base;
 	int ch, r;
 
 	if (cpu_class_is_omap1()) {
-		omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
+		base = OMAP1_DMA_BASE;
 		dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap24xx()) {
-		omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
+		base = OMAP24XX_DMA4_BASE;
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap34xx()) {
-		omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
+		base = OMAP34XX_DMA4_BASE;
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap44xx()) {
-		omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
+		base = OMAP44XX_DMA4_BASE;
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
 		return -ENODEV;
 	}
 
+	omap_dma_base = ioremap(base, SZ_4K);
+	BUG_ON(!omap_dma_base);
+
 	if (cpu_class_is_omap2() && omap_dma_reserve_channels
 			&& (omap_dma_reserve_channels <= dma_lch_count))
 		dma_lch_count = omap_dma_reserve_channels;
 
 	dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
 				GFP_KERNEL);
-	if (!dma_chan)
-		return -ENOMEM;
+	if (!dma_chan) {
+		r = -ENOMEM;
+		goto out_unmap;
+	}
 
 	if (cpu_class_is_omap2()) {
 		dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
 						dma_lch_count, GFP_KERNEL);
 		if (!dma_linked_lch) {
-			kfree(dma_chan);
-			return -ENOMEM;
+			r = -ENOMEM;
+			goto out_free;
 		}
 	}
 
@@ -2420,14 +2084,6 @@ static int __init omap_init_dma(void)
 			dma_chan_count = 16;
 		} else
 			dma_chan_count = 9;
-		if (cpu_is_omap16xx()) {
-			u16 w;
-
-			/* this would prevent OMAP sleep */
-			w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-			w &= ~(1 << 8);
-			omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-		}
 	} else if (cpu_class_is_omap2()) {
 		u8 revision = dma_read(REVISION) & 0xff;
 		printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
@@ -2438,7 +2094,6 @@ static int __init omap_init_dma(void)
 		return 0;
 	}
 
-	spin_lock_init(&lcd_dma.lock);
 	spin_lock_init(&dma_chan_lock);
 
 	for (ch = 0; ch < dma_chan_count; ch++) {
@@ -2466,7 +2121,7 @@ static int __init omap_init_dma(void)
 				for (i = 0; i < ch; i++)
 					free_irq(omap1_dma_irq[i],
 						 (void *) (i + 1));
-				return r;
+				goto out_free;
 			}
 		}
 	}
@@ -2484,8 +2139,8 @@ static int __init omap_init_dma(void)
 		setup_irq(irq, &omap24xx_dma_irq);
 	}
 
-	/* Enable smartidle idlemodes and autoidle */
 	if (cpu_is_omap34xx()) {
+		/* Enable smartidle idlemodes and autoidle */
 		u32 v = dma_read(OCP_SYSCONFIG);
 		v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
 				DMA_SYSCONFIG_SIDLEMODE_MASK |
@@ -2494,25 +2149,24 @@ static int __init omap_init_dma(void)
 			DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
 			DMA_SYSCONFIG_AUTOIDLE);
 		dma_write(v , OCP_SYSCONFIG);
-	}
-
-
-	/* FIXME: Update LCD DMA to work on 24xx */
-	if (cpu_class_is_omap1()) {
-		r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
-				"LCD DMA", NULL);
-		if (r != 0) {
-			int i;
-
-			printk(KERN_ERR "unable to request IRQ for LCD DMA "
-			       "(error %d)\n", r);
-			for (i = 0; i < dma_chan_count; i++)
-				free_irq(omap1_dma_irq[i], (void *) (i + 1));
-			return r;
+		/* reserve dma channels 0 and 1 in high security devices */
+		if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+			printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
+					"HS ROM code\n");
+			dma_chan[0].dev_id = 0;
+			dma_chan[1].dev_id = 1;
 		}
 	}
 
 	return 0;
+
+out_free:
+	kfree(dma_chan);
+
+out_unmap:
+	iounmap(omap_dma_base);
+
+	return r;
 }
 
 arch_initcall(omap_init_dma);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index d325b54daeb5..64f407ee0f4e 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -38,7 +38,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <mach/hardware.h>
-#include <mach/dmtimer.h>
+#include <plat/dmtimer.h>
 #include <mach/irqs.h>
 
 /* register offsets */
@@ -742,16 +742,17 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active);
 int __init omap_dm_timer_init(void)
 {
 	struct omap_dm_timer *timer;
-	int i;
+	int i, map_size = SZ_8K;	/* Module 4KB + L4 4KB except on omap1 */
 
 	if (!(cpu_is_omap16xx() || cpu_class_is_omap2()))
 		return -ENODEV;
 
 	spin_lock_init(&dm_timer_lock);
 
-	if (cpu_class_is_omap1())
+	if (cpu_class_is_omap1()) {
 		dm_timers = omap1_dm_timers;
-	else if (cpu_is_omap24xx()) {
+		map_size = SZ_2K;
+	} else if (cpu_is_omap24xx()) {
 		dm_timers = omap2_dm_timers;
 		dm_source_names = omap2_dm_source_names;
 		dm_source_clocks = omap2_dm_source_clocks;
@@ -774,10 +775,11 @@ int __init omap_dm_timer_init(void)
 
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
-		if (cpu_class_is_omap1())
-			timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
-		else
-			timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
+
+		/* Static mapping, never released */
+		timer->io_base = ioremap(timer->phys_base, map_size);
+		BUG_ON(!timer->io_base);
+
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 					defined(CONFIG_ARCH_OMAP4)
 		if (cpu_class_is_omap2()) {
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 3746222bed10..d3eea4f47533 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -28,13 +28,13 @@
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
 #include <linux/io.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/sram.h>
-#include <mach/omapfb.h>
+#include <plat/board.h>
+#include <plat/sram.h>
 
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
@@ -55,6 +55,10 @@ static struct platform_device omap_fb_device = {
 	.num_resources = 0,
 };
 
+void omapfb_set_platform_data(struct omapfb_platform_data *data)
+{
+}
+
 static inline int ranges_overlap(unsigned long start1, unsigned long size1,
 				 unsigned long start2, unsigned long size2)
 {
@@ -327,7 +331,33 @@ static inline int omap_init_fb(void)
 
 arch_initcall(omap_init_fb);
 
-#else
+#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+
+static u64 omap_fb_dma_mask = ~(u32)0;
+static struct omapfb_platform_data omapfb_config;
+
+static struct platform_device omap_fb_device = {
+	.name		= "omapfb",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &omap_fb_dma_mask,
+		.coherent_dma_mask	= ~(u32)0,
+		.platform_data		= &omapfb_config,
+	},
+	.num_resources = 0,
+};
+
+void omapfb_set_platform_data(struct omapfb_platform_data *data)
+{
+	omapfb_config = *data;
+}
+
+static inline int omap_init_fb(void)
+{
+	return platform_device_register(&omap_fb_device);
+}
+
+arch_initcall(omap_init_fb);
 
 void omapfb_reserve_sdram(void) {}
 unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
@@ -339,5 +369,20 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
 	return 0;
 }
 
+#else
+
+void omapfb_set_platform_data(struct omapfb_platform_data *data)
+{
+}
+
+void omapfb_reserve_sdram(void) {}
+unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+				  unsigned long sram_vstart,
+				  unsigned long sram_size,
+				  unsigned long start_avail,
+				  unsigned long size_avail)
+{
+	return 0;
+}
 
 #endif
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7c345b757df1..055160e0620e 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -31,7 +31,7 @@
 /*
  * OMAP1510 GPIO registers
  */
-#define OMAP1510_GPIO_BASE		OMAP1_IO_ADDRESS(0xfffce000)
+#define OMAP1510_GPIO_BASE		0xfffce000
 #define OMAP1510_GPIO_DATA_INPUT	0x00
 #define OMAP1510_GPIO_DATA_OUTPUT	0x04
 #define OMAP1510_GPIO_DIR_CONTROL	0x08
@@ -45,10 +45,10 @@
 /*
  * OMAP1610 specific GPIO registers
  */
-#define OMAP1610_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbe400)
-#define OMAP1610_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbec00)
-#define OMAP1610_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbb400)
-#define OMAP1610_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbbc00)
+#define OMAP1610_GPIO1_BASE		0xfffbe400
+#define OMAP1610_GPIO2_BASE		0xfffbec00
+#define OMAP1610_GPIO3_BASE		0xfffbb400
+#define OMAP1610_GPIO4_BASE		0xfffbbc00
 #define OMAP1610_GPIO_REVISION		0x0000
 #define OMAP1610_GPIO_SYSCONFIG		0x0010
 #define OMAP1610_GPIO_SYSSTATUS		0x0014
@@ -68,52 +68,36 @@
 #define OMAP1610_GPIO_SET_DATAOUT	0x00f0
 
 /*
- * OMAP730 specific GPIO registers
+ * OMAP7XX specific GPIO registers
  */
-#define OMAP730_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
-#define OMAP730_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
-#define OMAP730_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
-#define OMAP730_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
-#define OMAP730_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
-#define OMAP730_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
-#define OMAP730_GPIO_DATA_INPUT		0x00
-#define OMAP730_GPIO_DATA_OUTPUT	0x04
-#define OMAP730_GPIO_DIR_CONTROL	0x08
-#define OMAP730_GPIO_INT_CONTROL	0x0c
-#define OMAP730_GPIO_INT_MASK		0x10
-#define OMAP730_GPIO_INT_STATUS		0x14
-
-/*
- * OMAP850 specific GPIO registers
- */
-#define OMAP850_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
-#define OMAP850_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
-#define OMAP850_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
-#define OMAP850_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
-#define OMAP850_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
-#define OMAP850_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
-#define OMAP850_GPIO_DATA_INPUT		0x00
-#define OMAP850_GPIO_DATA_OUTPUT	0x04
-#define OMAP850_GPIO_DIR_CONTROL	0x08
-#define OMAP850_GPIO_INT_CONTROL	0x0c
-#define OMAP850_GPIO_INT_MASK		0x10
-#define OMAP850_GPIO_INT_STATUS		0x14
-
-#define OMAP1_MPUIO_VBASE		OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
+#define OMAP7XX_GPIO1_BASE		0xfffbc000
+#define OMAP7XX_GPIO2_BASE		0xfffbc800
+#define OMAP7XX_GPIO3_BASE		0xfffbd000
+#define OMAP7XX_GPIO4_BASE		0xfffbd800
+#define OMAP7XX_GPIO5_BASE		0xfffbe000
+#define OMAP7XX_GPIO6_BASE		0xfffbe800
+#define OMAP7XX_GPIO_DATA_INPUT		0x00
+#define OMAP7XX_GPIO_DATA_OUTPUT	0x04
+#define OMAP7XX_GPIO_DIR_CONTROL	0x08
+#define OMAP7XX_GPIO_INT_CONTROL	0x0c
+#define OMAP7XX_GPIO_INT_MASK		0x10
+#define OMAP7XX_GPIO_INT_STATUS		0x14
+
+#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 
 /*
  * omap24xx specific GPIO registers
  */
-#define OMAP242X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48018000)
-#define OMAP242X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4801a000)
-#define OMAP242X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x4801c000)
-#define OMAP242X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x4801e000)
+#define OMAP242X_GPIO1_BASE		0x48018000
+#define OMAP242X_GPIO2_BASE		0x4801a000
+#define OMAP242X_GPIO3_BASE		0x4801c000
+#define OMAP242X_GPIO4_BASE		0x4801e000
 
-#define OMAP243X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x4900C000)
-#define OMAP243X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4900E000)
-#define OMAP243X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49010000)
-#define OMAP243X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49012000)
-#define OMAP243X_GPIO5_BASE		OMAP2_IO_ADDRESS(0x480B6000)
+#define OMAP243X_GPIO1_BASE		0x4900C000
+#define OMAP243X_GPIO2_BASE		0x4900E000
+#define OMAP243X_GPIO3_BASE		0x49010000
+#define OMAP243X_GPIO4_BASE		0x49012000
+#define OMAP243X_GPIO5_BASE		0x480B6000
 
 #define OMAP24XX_GPIO_REVISION		0x0000
 #define OMAP24XX_GPIO_SYSCONFIG		0x0010
@@ -170,24 +154,25 @@
  * omap34xx specific GPIO registers
  */
 
-#define OMAP34XX_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48310000)
-#define OMAP34XX_GPIO2_BASE		OMAP2_IO_ADDRESS(0x49050000)
-#define OMAP34XX_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49052000)
-#define OMAP34XX_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49054000)
-#define OMAP34XX_GPIO5_BASE		OMAP2_IO_ADDRESS(0x49056000)
-#define OMAP34XX_GPIO6_BASE		OMAP2_IO_ADDRESS(0x49058000)
+#define OMAP34XX_GPIO1_BASE		0x48310000
+#define OMAP34XX_GPIO2_BASE		0x49050000
+#define OMAP34XX_GPIO3_BASE		0x49052000
+#define OMAP34XX_GPIO4_BASE		0x49054000
+#define OMAP34XX_GPIO5_BASE		0x49056000
+#define OMAP34XX_GPIO6_BASE		0x49058000
 
 /*
  * OMAP44XX  specific GPIO registers
  */
-#define OMAP44XX_GPIO1_BASE             OMAP2_IO_ADDRESS(0x4a310000)
-#define OMAP44XX_GPIO2_BASE             OMAP2_IO_ADDRESS(0x48055000)
-#define OMAP44XX_GPIO3_BASE             OMAP2_IO_ADDRESS(0x48057000)
-#define OMAP44XX_GPIO4_BASE             OMAP2_IO_ADDRESS(0x48059000)
-#define OMAP44XX_GPIO5_BASE             OMAP2_IO_ADDRESS(0x4805B000)
-#define OMAP44XX_GPIO6_BASE             OMAP2_IO_ADDRESS(0x4805D000)
+#define OMAP44XX_GPIO1_BASE             0x4a310000
+#define OMAP44XX_GPIO2_BASE             0x48055000
+#define OMAP44XX_GPIO3_BASE             0x48057000
+#define OMAP44XX_GPIO4_BASE             0x48059000
+#define OMAP44XX_GPIO5_BASE             0x4805B000
+#define OMAP44XX_GPIO6_BASE             0x4805D000
 
 struct gpio_bank {
+	unsigned long pbase;
 	void __iomem *base;
 	u16 irq;
 	u16 virtual_irq_start;
@@ -210,101 +195,134 @@ struct gpio_bank {
 	spinlock_t lock;
 	struct gpio_chip chip;
 	struct clk *dbck;
+	u32 mod_usage;
 };
 
 #define METHOD_MPUIO		0
 #define METHOD_GPIO_1510	1
 #define METHOD_GPIO_1610	2
-#define METHOD_GPIO_730		3
-#define METHOD_GPIO_850		4
+#define METHOD_GPIO_7XX		3
 #define METHOD_GPIO_24XX	5
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
-	{ OMAP1_MPUIO_VBASE,    INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
-	{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1,	    IH_GPIO_BASE,      METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 },
+	{ OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
+		METHOD_MPUIO },
+	{ OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_1610 },
+	{ OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16,
+		METHOD_GPIO_1610 },
+	{ OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32,
+		METHOD_GPIO_1610 },
+	{ OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48,
+		METHOD_GPIO_1610 },
 };
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct gpio_bank gpio_bank_1510[2] = {
-	{ OMAP1_MPUIO_VBASE,   INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
-	{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE,  METHOD_GPIO_1510 }
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP730
-static struct gpio_bank gpio_bank_730[7] = {
-	{ OMAP1_MPUIO_VBASE,    INT_730_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
-	{ OMAP730_GPIO1_BASE,  INT_730_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO2_BASE,  INT_730_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO3_BASE,  INT_730_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO4_BASE,  INT_730_GPIO_BANK4,  IH_GPIO_BASE + 96,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO5_BASE,  INT_730_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_730 },
-	{ OMAP730_GPIO6_BASE,  INT_730_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_730 },
+	{ OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
+		METHOD_MPUIO },
+	{ OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_1510 }
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP850
-static struct gpio_bank gpio_bank_850[7] = {
-	{ OMAP1_MPUIO_VBASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
-	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO4_BASE,  INT_850_GPIO_BANK4,  IH_GPIO_BASE + 96,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO5_BASE,  INT_850_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_850 },
-	{ OMAP850_GPIO6_BASE,  INT_850_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_850 },
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+static struct gpio_bank gpio_bank_7xx[7] = {
+	{ OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE,
+		METHOD_MPUIO },
+	{ OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4,  IH_GPIO_BASE + 96,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5,  IH_GPIO_BASE + 128,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6,  IH_GPIO_BASE + 160,
+		METHOD_GPIO_7XX },
 };
 #endif
 
-
 #ifdef CONFIG_ARCH_OMAP24XX
 
 static struct gpio_bank gpio_bank_242x[4] = {
-	{ OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+		METHOD_GPIO_24XX },
 };
 
 static struct gpio_bank gpio_bank_243x[5] = {
-	{ OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128,
+		METHOD_GPIO_24XX },
 };
 
 #endif
 
 #ifdef CONFIG_ARCH_OMAP34XX
 static struct gpio_bank gpio_bank_34xx[6] = {
-	{ OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160,
+		METHOD_GPIO_24XX },
 };
 
+struct omap3_gpio_regs {
+	u32 sysconfig;
+	u32 irqenable1;
+	u32 irqenable2;
+	u32 wake_en;
+	u32 ctrl;
+	u32 oe;
+	u32 leveldetect0;
+	u32 leveldetect1;
+	u32 risingdetect;
+	u32 fallingdetect;
+	u32 dataout;
+	u32 setwkuena;
+	u32 setdataout;
+};
+
+static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
 static struct gpio_bank gpio_bank_44xx[6] = {
-	{ OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,	\
+	{ OMAP44XX_GPIO1_BASE, NULL, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,	\
+	{ OMAP44XX_GPIO2_BASE, NULL, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,	\
+	{ OMAP44XX_GPIO3_BASE, NULL, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,	\
+	{ OMAP44XX_GPIO4_BASE, NULL, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+	{ OMAP44XX_GPIO5_BASE, NULL, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+	{ OMAP44XX_GPIO6_BASE, NULL, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160,
 		METHOD_GPIO_24XX },
 };
 
@@ -402,14 +420,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP1610_GPIO_DIRECTION;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DIR_CONTROL;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DIR_CONTROL;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -469,19 +482,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 		l = 1 << gpio;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DATA_OUTPUT;
-		l = __raw_readl(reg);
-		if (enable)
-			l |= 1 << gpio;
-		else
-			l &= ~(1 << gpio);
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DATA_OUTPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		l = __raw_readl(reg);
 		if (enable)
 			l |= 1 << gpio;
@@ -537,14 +540,9 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 		reg += OMAP1610_GPIO_DATAIN;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DATA_INPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DATA_INPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_INPUT;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -588,14 +586,9 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 		reg += OMAP1610_GPIO_DATAOUT;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DATA_OUTPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DATA_OUTPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
@@ -636,6 +629,10 @@ void omap_set_gpio_debounce(int gpio, int enable)
 #else
 	reg += OMAP24XX_GPIO_DEBOUNCE_EN;
 #endif
+	if (!(bank->mod_usage & l)) {
+		printk(KERN_ERR "GPIO %d not requested\n", gpio);
+		return;
+	}
 
 	spin_lock_irqsave(&bank->lock, flags);
 	val = __raw_readl(reg);
@@ -671,6 +668,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 	bank = get_gpio_bank(gpio);
 	reg = bank->base;
 
+	if (!bank->mod_usage) {
+		printk(KERN_ERR "GPIO not requested\n");
+		return;
+	}
+
 	enc_time &= 0xff;
 #ifdef CONFIG_ARCH_OMAP4
 	reg += OMAP4_GPIO_DEBOUNCINGTIME;
@@ -797,21 +799,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_CONTROL;
-		l = __raw_readl(reg);
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 1 << gpio;
-		else if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l &= ~(1 << gpio);
-		else
-			goto bad;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_CONTROL;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
@@ -897,14 +887,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP1610_GPIO_IRQSTATUS1;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_STATUS;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_STATUS;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_STATUS;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -971,16 +956,9 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		mask = 0xffff;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_MASK;
-		mask = 0xffffffff;
-		inv = 1;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_MASK;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_MASK;
 		mask = 0xffffffff;
 		inv = 1;
 		break;
@@ -1044,19 +1022,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 		l = gpio_mask;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_MASK;
-		l = __raw_readl(reg);
-		if (enable)
-			l &= ~(gpio_mask);
-		else
-			l |= gpio_mask;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_MASK;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_MASK;
 		l = __raw_readl(reg);
 		if (enable)
 			l &= ~(gpio_mask);
@@ -1186,6 +1154,16 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
 	}
 #endif
+	if (!cpu_class_is_omap1()) {
+		if (!bank->mod_usage) {
+			u32 ctrl;
+			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+			ctrl &= 0xFFFFFFFE;
+			/* Module is enabled, clocks are not gated */
+			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+		}
+		bank->mod_usage |= 1 << offset;
+	}
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -1212,6 +1190,16 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(1 << offset, reg);
 	}
 #endif
+	if (!cpu_class_is_omap1()) {
+		bank->mod_usage &= ~(1 << offset);
+		if (!bank->mod_usage) {
+			u32 ctrl;
+			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+			/* Module is disabled, clocks are gated */
+			ctrl |= 1;
+			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+		}
+	}
 	_reset_gpio(bank, bank->chip.base + offset);
 	spin_unlock_irqrestore(&bank->lock, flags);
 }
@@ -1249,13 +1237,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_1610)
 		isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	if (bank->method == METHOD_GPIO_730)
-		isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	if (bank->method == METHOD_GPIO_850)
-		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (bank->method == METHOD_GPIO_7XX)
+		isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX)
@@ -1524,11 +1508,8 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
 	case METHOD_GPIO_1610:
 		reg += OMAP1610_GPIO_DIRECTION;
 		break;
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DIR_CONTROL;
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
@@ -1607,6 +1588,23 @@ static struct clk * gpio5_fck;
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
+static void __init omap_gpio_show_rev(void)
+{
+	u32 rev;
+
+	if (cpu_is_omap16xx())
+		rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
+	else if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+	else if (cpu_is_omap44xx())
+		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
+	else
+		return;
+
+	printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
+		(rev >> 4) & 0x0f, rev & 0x0f);
+}
+
 /* This lock class tells lockdep that GPIO irqs are in a different
  * category than their parents, so it won't report false recursion.
  */
@@ -1617,6 +1615,7 @@ static int __init _omap_gpio_init(void)
 	int i;
 	int gpio = 0;
 	struct gpio_bank *bank;
+	int bank_size = SZ_8K;	/* Module 4KB + L4 4KB except on omap1 */
 	char clk_name[11];
 
 	initialized = 1;
@@ -1679,77 +1678,45 @@ static int __init _omap_gpio_init(void)
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
-		printk(KERN_INFO "OMAP1510 GPIO hardware\n");
 		gpio_bank_count = 2;
 		gpio_bank = gpio_bank_1510;
+		bank_size = SZ_2K;
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (cpu_is_omap16xx()) {
-		u32 rev;
-
 		gpio_bank_count = 5;
 		gpio_bank = gpio_bank_1610;
-		rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
-		printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
-		       (rev >> 4) & 0x0f, rev & 0x0f);
+		bank_size = SZ_2K;
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	if (cpu_is_omap730()) {
-		printk(KERN_INFO "OMAP730 GPIO hardware\n");
-		gpio_bank_count = 7;
-		gpio_bank = gpio_bank_730;
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	if (cpu_is_omap850()) {
-		printk(KERN_INFO "OMAP850 GPIO hardware\n");
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (cpu_is_omap7xx()) {
 		gpio_bank_count = 7;
-		gpio_bank = gpio_bank_850;
+		gpio_bank = gpio_bank_7xx;
+		bank_size = SZ_2K;
 	}
 #endif
-
 #ifdef CONFIG_ARCH_OMAP24XX
 	if (cpu_is_omap242x()) {
-		int rev;
-
 		gpio_bank_count = 4;
 		gpio_bank = gpio_bank_242x;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
-		printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 	if (cpu_is_omap243x()) {
-		int rev;
-
 		gpio_bank_count = 5;
 		gpio_bank = gpio_bank_243x;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
-		printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP34XX
 	if (cpu_is_omap34xx()) {
-		int rev;
-
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_34xx;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
-		printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP4
 	if (cpu_is_omap44xx()) {
-		int rev;
-
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_44xx;
-		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
-		printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
 	for (i = 0; i < gpio_bank_count; i++) {
@@ -1757,6 +1724,14 @@ static int __init _omap_gpio_init(void)
 
 		bank = &gpio_bank[i];
 		spin_lock_init(&bank->lock);
+
+		/* Static mapping, never released */
+		bank->base = ioremap(bank->pbase, bank_size);
+		if (!bank->base) {
+			printk(KERN_ERR "Could not ioremap gpio bank%i\n", i);
+			continue;
+		}
+
 		if (bank_is_mpuio(bank))
 			__raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT);
 		if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
@@ -1768,11 +1743,11 @@ static int __init _omap_gpio_init(void)
 			__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
 			__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
 		}
-		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
-			__raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
-			__raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
+		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
+			__raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK);
+			__raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS);
 
-			gpio_count = 32; /* 730 has 32-bit GPIOs */
+			gpio_count = 32; /* 7xx has 32-bit GPIOs */
 		}
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
@@ -1804,6 +1779,8 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32;
 		}
 #endif
+
+		bank->mod_usage = 0;
 		/* REVISIT eventually switch from OMAP-specific gpio structs
 		 * over to the generic ones
 		 */
@@ -1862,6 +1839,8 @@ static int __init _omap_gpio_init(void)
 	if (cpu_is_omap34xx())
 		omap_writel(1 << 0, 0x48306814);
 
+	omap_gpio_show_rev();
+
 	return 0;
 }
 
@@ -2106,6 +2085,81 @@ void omap2_gpio_resume_after_retention(void)
 
 #endif
 
+#ifdef CONFIG_ARCH_OMAP34XX
+/* save the registers of bank 2-6 */
+void omap_gpio_save_context(void)
+{
+	int i;
+
+	/* saving banks from 2-6 only since GPIO1 is in WKUP */
+	for (i = 1; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		gpio_context[i].sysconfig =
+			__raw_readl(bank->base + OMAP24XX_GPIO_SYSCONFIG);
+		gpio_context[i].irqenable1 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
+		gpio_context[i].irqenable2 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
+		gpio_context[i].wake_en =
+			__raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
+		gpio_context[i].ctrl =
+			__raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+		gpio_context[i].oe =
+			__raw_readl(bank->base + OMAP24XX_GPIO_OE);
+		gpio_context[i].leveldetect0 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+		gpio_context[i].leveldetect1 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+		gpio_context[i].risingdetect =
+			__raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		gpio_context[i].fallingdetect =
+			__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+		gpio_context[i].dataout =
+			__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
+		gpio_context[i].setwkuena =
+			__raw_readl(bank->base + OMAP24XX_GPIO_SETWKUENA);
+		gpio_context[i].setdataout =
+			__raw_readl(bank->base + OMAP24XX_GPIO_SETDATAOUT);
+	}
+}
+
+/* restore the required registers of bank 2-6 */
+void omap_gpio_restore_context(void)
+{
+	int i;
+
+	for (i = 1; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		__raw_writel(gpio_context[i].sysconfig,
+				bank->base + OMAP24XX_GPIO_SYSCONFIG);
+		__raw_writel(gpio_context[i].irqenable1,
+				bank->base + OMAP24XX_GPIO_IRQENABLE1);
+		__raw_writel(gpio_context[i].irqenable2,
+				bank->base + OMAP24XX_GPIO_IRQENABLE2);
+		__raw_writel(gpio_context[i].wake_en,
+				bank->base + OMAP24XX_GPIO_WAKE_EN);
+		__raw_writel(gpio_context[i].ctrl,
+				bank->base + OMAP24XX_GPIO_CTRL);
+		__raw_writel(gpio_context[i].oe,
+				bank->base + OMAP24XX_GPIO_OE);
+		__raw_writel(gpio_context[i].leveldetect0,
+				bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+		__raw_writel(gpio_context[i].leveldetect1,
+				bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+		__raw_writel(gpio_context[i].risingdetect,
+				bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		__raw_writel(gpio_context[i].fallingdetect,
+				bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+		__raw_writel(gpio_context[i].dataout,
+				bank->base + OMAP24XX_GPIO_DATAOUT);
+		__raw_writel(gpio_context[i].setwkuena,
+				bank->base + OMAP24XX_GPIO_SETWKUENA);
+		__raw_writel(gpio_context[i].setdataout,
+				bank->base + OMAP24XX_GPIO_SETDATAOUT);
+	}
+}
+#endif
+
 /*
  * This may get called early from board specific init
  * for boards that have interrupts routed via FPGA.
@@ -2160,8 +2214,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 		if (bank_is_mpuio(bank))
 			gpio = OMAP_MPUIO(0);
-		else if (cpu_class_is_omap2() || cpu_is_omap730() ||
-				cpu_is_omap850())
+		else if (cpu_class_is_omap2() || cpu_is_omap7xx())
 			bankwidth = 32;
 
 		for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 8b848391f0c8..33fff4ef382d 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <mach/irqs.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
@@ -80,47 +80,8 @@ static struct platform_device omap_i2c_devices[] = {
 #endif
 };
 
-#if defined(CONFIG_ARCH_OMAP24XX)
-static const int omap24xx_pins[][2] = {
-	{ M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
-	{ J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
-};
-#else
-static const int omap24xx_pins[][2] = {};
-#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
-static const int omap34xx_pins[][2] = {
-	{ K21_34XX_I2C1_SCL, J21_34XX_I2C1_SDA},
-	{ AF15_34XX_I2C2_SCL, AE15_34XX_I2C2_SDA},
-	{ AF14_34XX_I2C3_SCL, AG14_34XX_I2C3_SDA},
-};
-#else
-static const int omap34xx_pins[][2] = {};
-#endif
-
 #define OMAP_I2C_CMDLINE_SETUP	(BIT(31))
 
-static void __init omap_i2c_mux_pins(int bus)
-{
-	int scl, sda;
-
-	if (cpu_class_is_omap1()) {
-		scl = I2C_SCL;
-		sda = I2C_SDA;
-	} else if (cpu_is_omap24xx()) {
-		scl = omap24xx_pins[bus][0];
-		sda = omap24xx_pins[bus][1];
-	} else if (cpu_is_omap34xx()) {
-		scl = omap34xx_pins[bus][0];
-		sda = omap34xx_pins[bus][1];
-	} else {
-		return;
-	}
-
-	omap_cfg_reg(sda);
-	omap_cfg_reg(scl);
-}
-
 static int __init omap_i2c_nr_ports(void)
 {
 	int ports = 0;
@@ -156,7 +117,6 @@ static int __init omap_i2c_add_bus(int bus_id)
 		res[1].start = irq;
 	}
 
-	omap_i2c_mux_pins(bus_id - 1);
 	return platform_device_register(pdev);
 }
 
@@ -209,7 +169,7 @@ out:
 subsys_initcall(omap_register_i2c_bus_cmdline);
 
 /**
- * omap_register_i2c_bus - register I2C bus with device descriptors
+ * omap_plat_register_i2c_bus - register I2C bus with device descriptors
  * @bus_id: bus id counting from number 1
  * @clkrate: clock rate of the bus in kHz
  * @info: pointer into I2C device descriptor table or NULL
@@ -217,7 +177,7 @@ subsys_initcall(omap_register_i2c_bus_cmdline);
  *
  * Returns 0 on success or an error code.
  */
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
 			  struct i2c_board_info const *info,
 			  unsigned len)
 {
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
deleted file mode 100644
index b226bdf45739..000000000000
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * File: arch/arm/plat-omap/include/mach/omapfb.h
- *
- * Framebuffer driver for TI OMAP boards
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __OMAPFB_H
-#define __OMAPFB_H
-
-#include <asm/ioctl.h>
-#include <asm/types.h>
-
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
-#define OMAP_IO(num)		_IO('O', num)
-
-#define OMAPFB_MIRROR		OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX		OMAP_IO(37)
-#define OMAPFB_VSYNC		OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK		0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
-#define OMAPFB_CAPS_TEARSYNC		0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
-#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
-#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK		0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
-
-#define OMAPFB_EVENT_READY	1
-#define OMAPFB_EVENT_DISABLED	2
-
-#define OMAPFB_MEMTYPE_SDRAM		0
-#define OMAPFB_MEMTYPE_SRAM		1
-#define OMAPFB_MEMTYPE_MAX		1
-
-enum omapfb_color_format {
-	OMAPFB_COLOR_RGB565 = 0,
-	OMAPFB_COLOR_YUV422,
-	OMAPFB_COLOR_YUV420,
-	OMAPFB_COLOR_CLUT_8BPP,
-	OMAPFB_COLOR_CLUT_4BPP,
-	OMAPFB_COLOR_CLUT_2BPP,
-	OMAPFB_COLOR_CLUT_1BPP,
-	OMAPFB_COLOR_RGB444,
-	OMAPFB_COLOR_YUY422,
-};
-
-struct omapfb_update_window {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-	__u32 out_x, out_y;
-	__u32 out_width, out_height;
-	__u32 reserved[8];
-};
-
-struct omapfb_update_window_old {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-};
-
-enum omapfb_plane {
-	OMAPFB_PLANE_GFX = 0,
-	OMAPFB_PLANE_VID1,
-	OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
-	OMAPFB_CHANNEL_OUT_LCD = 0,
-	OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
-	__u32 pos_x;
-	__u32 pos_y;
-	__u8  enabled;
-	__u8  channel_out;
-	__u8  mirror;
-	__u8  reserved1;
-	__u32 out_width;
-	__u32 out_height;
-	__u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
-	__u32 size;
-	__u8  type;
-	__u8  reserved[3];
-};
-
-struct omapfb_caps {
-	__u32 ctrl;
-	__u32 plane_color;
-	__u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
-	OMAPFB_COLOR_KEY_DISABLED = 0,
-	OMAPFB_COLOR_KEY_GFX_DST,
-	OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
-	__u8  channel_out;
-	__u32 background;
-	__u32 trans_key;
-	__u8  key_type;
-};
-
-enum omapfb_update_mode {
-	OMAPFB_UPDATE_DISABLED = 0,
-	OMAPFB_AUTO_UPDATE,
-	OMAPFB_MANUAL_UPDATE
-};
-
-#ifdef __KERNEL__
-
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/mutex.h>
-
-#include <mach/board.h>
-
-#define OMAP_LCDC_INV_VSYNC             0x0001
-#define OMAP_LCDC_INV_HSYNC             0x0002
-#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
-#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
-#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
-#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
-
-#define OMAP_LCDC_SIGNAL_MASK		0x003f
-
-#define OMAP_LCDC_PANEL_TFT		0x0100
-
-#define OMAPFB_PLANE_XRES_MIN		8
-#define OMAPFB_PLANE_YRES_MIN		8
-
-#ifdef CONFIG_ARCH_OMAP1
-#define OMAPFB_PLANE_NUM		1
-#else
-#define OMAPFB_PLANE_NUM		3
-#endif
-
-struct omapfb_device;
-
-struct lcd_panel {
-	const char	*name;
-	int		config;		/* TFT/STN, signal inversion */
-	int		bpp;		/* Pixel format in fb mem */
-	int		data_lines;	/* Lines on LCD HW interface */
-
-	int		x_res, y_res;
-	int		pixel_clock;	/* In kHz */
-	int		hsw;		/* Horizontal synchronization
-					   pulse width */
-	int		hfp;		/* Horizontal front porch */
-	int		hbp;		/* Horizontal back porch */
-	int		vsw;		/* Vertical synchronization
-					   pulse width */
-	int		vfp;		/* Vertical front porch */
-	int		vbp;		/* Vertical back porch */
-	int		acb;		/* ac-bias pin frequency */
-	int		pcd;		/* pixel clock divider.
-					   Obsolete use pixel_clock instead */
-
-	int		(*init)		(struct lcd_panel *panel,
-					 struct omapfb_device *fbdev);
-	void		(*cleanup)	(struct lcd_panel *panel);
-	int		(*enable)	(struct lcd_panel *panel);
-	void		(*disable)	(struct lcd_panel *panel);
-	unsigned long	(*get_caps)	(struct lcd_panel *panel);
-	int		(*set_bklight_level)(struct lcd_panel *panel,
-					     unsigned int level);
-	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
-	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
-	int		(*run_test)	(struct lcd_panel *panel, int test_num);
-};
-
-struct extif_timings {
-	int cs_on_time;
-	int cs_off_time;
-	int we_on_time;
-	int we_off_time;
-	int re_on_time;
-	int re_off_time;
-	int we_cycle_time;
-	int re_cycle_time;
-	int cs_pulse_width;
-	int access_time;
-
-	int clk_div;
-
-	u32 tim[5];		/* set by extif->convert_timings */
-
-	int converted;
-};
-
-struct lcd_ctrl_extif {
-	int  (*init)		(struct omapfb_device *fbdev);
-	void (*cleanup)		(void);
-	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
-	unsigned long (*get_max_tx_rate)(void);
-	int  (*convert_timings)	(struct extif_timings *timings);
-	void (*set_timings)	(const struct extif_timings *timings);
-	void (*set_bits_per_cycle)(int bpc);
-	void (*write_command)	(const void *buf, unsigned int len);
-	void (*read_data)	(void *buf, unsigned int len);
-	void (*write_data)	(const void *buf, unsigned int len);
-	void (*transfer_area)	(int width, int height,
-				 void (callback)(void * data), void *data);
-	int  (*setup_tearsync)	(unsigned pin_cnt,
-				 unsigned hs_pulse_time, unsigned vs_pulse_time,
-				 int hs_pol_inv, int vs_pol_inv, int div);
-	int  (*enable_tearsync) (int enable, unsigned line);
-
-	unsigned long		max_transmit_size;
-};
-
-struct omapfb_notifier_block {
-	struct notifier_block	nb;
-	void			*data;
-	int			plane_idx;
-};
-
-typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
-					  unsigned long event,
-					  void *fbi);
-
-struct omapfb_mem_region {
-	u32		paddr;
-	void __iomem	*vaddr;
-	unsigned long	size;
-	u8		type;		/* OMAPFB_PLANE_MEM_* */
-	unsigned	alloc:1;	/* allocated by the driver */
-	unsigned	map:1;		/* kernel mapped by the driver */
-};
-
-struct omapfb_mem_desc {
-	int				region_cnt;
-	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
-};
-
-struct lcd_ctrl {
-	const char	*name;
-	void		*data;
-
-	int		(*init)		  (struct omapfb_device *fbdev,
-					   int ext_mode,
-					   struct omapfb_mem_desc *req_md);
-	void		(*cleanup)	  (void);
-	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
-	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
-	int		(*set_update_mode)(enum omapfb_update_mode mode);
-	enum omapfb_update_mode (*get_update_mode)(void);
-	int		(*setup_plane)	  (int plane, int channel_out,
-					   unsigned long offset,
-					   int screen_width,
-					   int pos_x, int pos_y, int width,
-					   int height, int color_mode);
-	int		(*set_rotate)	  (int angle);
-	int		(*setup_mem)	  (int plane, size_t size,
-					   int mem_type, unsigned long *paddr);
-	int		(*mmap)		  (struct fb_info *info,
-					   struct vm_area_struct *vma);
-	int		(*set_scale)	  (int plane,
-					   int orig_width, int orig_height,
-					   int out_width, int out_height);
-	int		(*enable_plane)	  (int plane, int enable);
-	int		(*update_window)  (struct fb_info *fbi,
-					   struct omapfb_update_window *win,
-					   void (*callback)(void *),
-					   void *callback_data);
-	void		(*sync)		  (void);
-	void		(*suspend)	  (void);
-	void		(*resume)	  (void);
-	int		(*run_test)	  (int test_num);
-	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
-					   u16 blue, u16 transp,
-					   int update_hw_mem);
-	int		(*set_color_key)  (struct omapfb_color_key *ck);
-	int		(*get_color_key)  (struct omapfb_color_key *ck);
-};
-
-enum omapfb_state {
-	OMAPFB_DISABLED	= 0,
-	OMAPFB_SUSPENDED= 99,
-	OMAPFB_ACTIVE	= 100
-};
-
-struct omapfb_plane_struct {
-	int				idx;
-	struct omapfb_plane_info	info;
-	enum omapfb_color_format	color_mode;
-	struct omapfb_device		*fbdev;
-};
-
-struct omapfb_device {
-	int			state;
-	int                     ext_lcdc;               /* Using external
-                                                           LCD controller */
-	struct mutex		rqueue_mutex;
-
-	int			palette_size;
-	u32			pseudo_palette[17];
-
-	struct lcd_panel	*panel;			/* LCD panel */
-	const struct lcd_ctrl	*ctrl;			/* LCD controller */
-	const struct lcd_ctrl	*int_ctrl;		/* internal LCD ctrl */
-	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
-							   interface */
-	struct device		*dev;
-	struct fb_var_screeninfo	new_var;	/* for mode changes */
-
-	struct omapfb_mem_desc		mem_desc;
-	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
-};
-
-struct omapfb_platform_data {
-	struct omap_lcd_config		lcd;
-	struct omapfb_mem_desc		mem_desc;
-	void				*ctrl_platform_data;
-};
-
-#ifdef CONFIG_ARCH_OMAP1
-extern struct lcd_ctrl omap1_lcd_ctrl;
-#else
-extern struct lcd_ctrl omap2_disp_ctrl;
-#endif
-
-extern void omapfb_reserve_sdram(void);
-extern void omapfb_register_panel(struct lcd_panel *panel);
-extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
-extern void omapfb_notify_clients(struct omapfb_device *fbdev,
-				  unsigned long event);
-extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
-				   omapfb_notifier_callback_t callback,
-				   void *callback_data);
-extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
-extern int  omapfb_update_window_async(struct fb_info *fbi,
-				       struct omapfb_update_window *win,
-				       void (*callback)(void *),
-				       void *callback_data);
-
-/* in arch/arm/plat-omap/fb.c */
-extern void omapfb_set_ctrl_platform_data(void *pdata);
-
-#endif /* __KERNEL__ */
-
-#endif /* __OMAPFB_H */
diff --git a/arch/arm/plat-omap/include/mach/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h
index 8d160f171372..8d160f171372 100644
--- a/arch/arm/plat-omap/include/mach/blizzard.h
+++ b/arch/arm/plat-omap/include/plat/blizzard.h
diff --git a/arch/arm/plat-omap/include/mach/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
index 51b102dc906b..51b102dc906b 100644
--- a/arch/arm/plat-omap/include/mach/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h
diff --git a/arch/arm/plat-omap/include/mach/board-sx1.h b/arch/arm/plat-omap/include/plat/board-sx1.h
index 355adbdaae33..355adbdaae33 100644
--- a/arch/arm/plat-omap/include/mach/board-sx1.h
+++ b/arch/arm/plat-omap/include/plat/board-sx1.h
diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/plat/board-voiceblue.h
index 27916b210f57..27916b210f57 100644
--- a/arch/arm/plat-omap/include/mach/board-voiceblue.h
+++ b/arch/arm/plat-omap/include/plat/board-voiceblue.h
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/plat/board.h
index 8e913c322810..376ce18216ff 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -12,7 +12,19 @@
 
 #include <linux/types.h>
 
-#include <mach/gpio-switch.h>
+#include <plat/gpio-switch.h>
+
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ *	GEN_1	= 0x01150000
+ *	GEN_2	= 0x92200000
+ */
+enum {
+	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
+	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
+};
 
 /* Different peripheral ids */
 #define OMAP_TAG_CLOCK		0x4f01
@@ -102,15 +114,6 @@ struct omap_pwm_led_platform_data {
 	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
 };
 
-/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
-struct omap_gpio_switch_config {
-	char name[12];
-	u16 gpio;
-	int flags:4;
-	int type:4;
-	int key_code:24; /* Linux key code */
-};
-
 struct omap_uart_config {
 	/* Bit field of UARTs present; bit 0 --> UART1 */
 	unsigned int enabled_uarts;
@@ -157,4 +160,10 @@ extern int omap_board_config_size;
 /* for TI reference platforms sharing the same debug card */
 extern int debug_card_init(u32 addr, unsigned gpio);
 
+/* OMAP3EVM revision */
+#if defined(CONFIG_MACH_OMAP3EVM)
+u8 get_omap3_evm_rev(void);
+#else
+#define get_omap3_evm_rev() (-EINVAL)
+#endif
 #endif
diff --git a/arch/arm/plat-omap/include/mach/clkdev.h b/arch/arm/plat-omap/include/plat/clkdev.h
index 730c49d1ebd8..730c49d1ebd8 100644
--- a/arch/arm/plat-omap/include/mach/clkdev.h
+++ b/arch/arm/plat-omap/include/plat/clkdev.h
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
new file mode 100644
index 000000000000..35b36caf5f91
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -0,0 +1,41 @@
+/*
+ * clkdev <-> OMAP integration
+ *
+ * Russell King <linux@arm.linux.org.uk>
+ *
+ */
+
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
+
+#include <asm/clkdev.h>
+
+struct omap_clk {
+	u16				cpu;
+	struct clk_lookup		lk;
+};
+
+#define CLK(dev, con, ck, cp) 		\
+	{				\
+		 .cpu = cp,		\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
+
+
+#define CK_310		(1 << 0)
+#define CK_7XX		(1 << 1)
+#define CK_1510		(1 << 2)
+#define CK_16XX		(1 << 3)
+#define CK_243X		(1 << 4)
+#define CK_242X		(1 << 5)
+#define CK_343X		(1 << 6)
+#define CK_3430ES1	(1 << 7)
+#define CK_3430ES2	(1 << 8)
+#define CK_443X		(1 << 9)
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 4b8b0d65cbf2..309b6d1dccdb 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -13,6 +13,8 @@
 #ifndef __ARCH_ARM_OMAP_CLOCK_H
 #define __ARCH_ARM_OMAP_CLOCK_H
 
+#include <linux/list.h>
+
 struct module;
 struct clk;
 struct clockdomain;
@@ -148,6 +150,8 @@ extern const struct clkops clkops_null;
 #define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
 #define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
 #define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
+#define CLOCK_IN_OMAP4430	(1 << 13)
+#define ALWAYS_ENABLED		(1 << 14)
 /* bits 13-31 are currently free */
 
 /* Clksel_rate flags */
@@ -156,6 +160,7 @@ extern const struct clkops clkops_null;
 #define RATE_IN_243X		(1 << 2)
 #define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
 #define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
+#define RATE_IN_4430            (1 << 5)
 
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
 
diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/plat/clockdomain.h
index 99ebd886f134..eb734826e64e 100644
--- a/arch/arm/plat-omap/include/mach/clockdomain.h
+++ b/arch/arm/plat-omap/include/plat/clockdomain.h
@@ -16,9 +16,9 @@
 #ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
 #define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
 
-#include <mach/powerdomain.h>
-#include <mach/clock.h>
-#include <mach/cpu.h>
+#include <plat/powerdomain.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
 
 /* Clockdomain capability flags */
 #define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/plat/common.h
index fdeab421b4dc..32c22272425d 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -27,24 +27,15 @@
 #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
 #define __ARCH_ARM_MACH_OMAP_COMMON_H
 
-#include <linux/i2c.h>
+#include <plat/i2c.h>
 
 struct sys_timer;
 
+/* used by omap-smp.c and board-4430sdp.c */
+extern void __iomem *gic_cpu_base_addr;
+
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len);
-#else
-static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len)
-{
-	return 0;
-}
-#endif
 
 /* IO bases for various OMAP processors */
 struct omap_globals {
@@ -55,6 +46,7 @@ struct omap_globals {
 	void __iomem	*ctrl;		/* System Control Module */
 	void __iomem	*prm;		/* Power and Reset Management */
 	void __iomem	*cm;		/* Clock Management */
+	void __iomem	*cm2;
 };
 
 void omap2_set_globals_242x(void);
@@ -68,4 +60,24 @@ void omap2_set_globals_sdrc(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
 
+/**
+ * omap_test_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed.  To use, define some integer @index in the
+ * calling code.  After running, if @index == @timeout, then the loop has
+ * timed out.
+ */
+#define omap_test_timeout(cond, timeout, index)			\
+({								\
+	for (index = 0; index < timeout; index++) {		\
+		if (cond)					\
+			break;					\
+		udelay(1);					\
+	}							\
+})
+
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/plat/control.h
index 826d317cdbec..2ae884378638 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -20,15 +20,18 @@
 
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
-	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
 #define OMAP243X_CTRL_REGADDR(reg)					\
-	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
-	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #else
-#define OMAP242X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define OMAP242X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -109,6 +112,8 @@
 #define OMAP24XX_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e0)
 #define OMAP24XX_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00e4)
 
+#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0)
+
 /* 34xx-only CONTROL_GENERAL register offsets */
 #define OMAP343X_CONTROL_PADCONF_OFF	(OMAP2_CONTROL_GENERAL + 0x0000)
 #define OMAP343X_CONTROL_MEM_DFTRW0	(OMAP2_CONTROL_GENERAL + 0x0008)
@@ -141,8 +146,51 @@
 #define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
 #define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02b0)
-#define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
+#define OMAP343X_CONTROL_DEBOBS(i)	(OMAP2_CONTROL_GENERAL + 0x01B0 \
+					+ ((i) >> 1) * 4 + (!(i) & 1) * 2)
+#define OMAP343X_CONTROL_PROG_IO0	(OMAP2_CONTROL_GENERAL + 0x01D4)
+#define OMAP343X_CONTROL_PROG_IO1	(OMAP2_CONTROL_GENERAL + 0x01D8)
+#define OMAP343X_CONTROL_DSS_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E0)
+#define OMAP343X_CONTROL_CORE_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E4)
+#define OMAP343X_CONTROL_PER_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E8)
+#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01EC)
+#define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02B0)
+#define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02B4)
+#define OMAP343X_CONTROL_SRAMLDO4	(OMAP2_CONTROL_GENERAL + 0x02B8)
+#define OMAP343X_CONTROL_SRAMLDO5	(OMAP2_CONTROL_GENERAL + 0x02C0)
+#define OMAP343X_CONTROL_CSI		(OMAP2_CONTROL_GENERAL + 0x02C4)
+
+
+/* 34xx PADCONF register offsets */
+#define OMAP343X_PADCONF_ETK(i)		(OMAP2_CONTROL_PADCONFS + 0x5a8 + \
+						(i)*2)
+#define OMAP343X_PADCONF_ETK_CLK	OMAP343X_PADCONF_ETK(0)
+#define OMAP343X_PADCONF_ETK_CTL	OMAP343X_PADCONF_ETK(1)
+#define OMAP343X_PADCONF_ETK_D0		OMAP343X_PADCONF_ETK(2)
+#define OMAP343X_PADCONF_ETK_D1		OMAP343X_PADCONF_ETK(3)
+#define OMAP343X_PADCONF_ETK_D2		OMAP343X_PADCONF_ETK(4)
+#define OMAP343X_PADCONF_ETK_D3		OMAP343X_PADCONF_ETK(5)
+#define OMAP343X_PADCONF_ETK_D4		OMAP343X_PADCONF_ETK(6)
+#define OMAP343X_PADCONF_ETK_D5		OMAP343X_PADCONF_ETK(7)
+#define OMAP343X_PADCONF_ETK_D6		OMAP343X_PADCONF_ETK(8)
+#define OMAP343X_PADCONF_ETK_D7		OMAP343X_PADCONF_ETK(9)
+#define OMAP343X_PADCONF_ETK_D8		OMAP343X_PADCONF_ETK(10)
+#define OMAP343X_PADCONF_ETK_D9		OMAP343X_PADCONF_ETK(11)
+#define OMAP343X_PADCONF_ETK_D10	OMAP343X_PADCONF_ETK(12)
+#define OMAP343X_PADCONF_ETK_D11	OMAP343X_PADCONF_ETK(13)
+#define OMAP343X_PADCONF_ETK_D12	OMAP343X_PADCONF_ETK(14)
+#define OMAP343X_PADCONF_ETK_D13	OMAP343X_PADCONF_ETK(15)
+#define OMAP343X_PADCONF_ETK_D14	OMAP343X_PADCONF_ETK(16)
+#define OMAP343X_PADCONF_ETK_D15	OMAP343X_PADCONF_ETK(17)
+
+/* 34xx GENERAL_WKUP regist offsets */
+#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
+						0x008 + (i))
+#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
+#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C)
+#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010)
+#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
+#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
 
 /* 34xx D2D idle-related pins, handled by PM core */
 #define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
@@ -193,6 +241,9 @@
 #define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)
 
+/* CONTROL_PROG_IO1 bits */
+#define OMAP3630_PRG_SDMMC1_SPEEDCTRL	(1 << 20)
+
 /* CONTROL_IVA2_BOOTMOD bits */
 #define OMAP3_IVA2_BOOTMOD_SHIFT	0
 #define OMAP3_IVA2_BOOTMOD_MASK		(0xf << 0)
@@ -202,6 +253,44 @@
 #define OMAP3_PADCONF_WAKEUPEVENT0	(1 << 15)
 #define OMAP3_PADCONF_WAKEUPENABLE0	(1 << 14)
 
+#define OMAP343X_SCRATCHPAD_ROM		(OMAP343X_CTRL_BASE + 0x860)
+#define OMAP343X_SCRATCHPAD		(OMAP343X_CTRL_BASE + 0x910)
+#define OMAP343X_SCRATCHPAD_ROM_OFFSET	0x19C
+
+/*
+ * CONTROL OMAP STATUS register to identify OMAP3 features
+ */
+#define OMAP3_CONTROL_OMAP_STATUS	0x044c
+
+#define OMAP3_SGX_SHIFT			13
+#define OMAP3_SGX_MASK			(3 << OMAP3_SGX_SHIFT)
+#define		FEAT_SGX_FULL		0
+#define		FEAT_SGX_HALF		1
+#define		FEAT_SGX_NONE		2
+
+#define OMAP3_IVA_SHIFT			12
+#define OMAP3_IVA_MASK			(1 << OMAP3_SGX_SHIFT)
+#define		FEAT_IVA		0
+#define		FEAT_IVA_NONE		1
+
+#define OMAP3_L2CACHE_SHIFT		10
+#define OMAP3_L2CACHE_MASK		(3 << OMAP3_L2CACHE_SHIFT)
+#define		FEAT_L2CACHE_NONE	0
+#define		FEAT_L2CACHE_64KB	1
+#define		FEAT_L2CACHE_128KB	2
+#define		FEAT_L2CACHE_256KB	3
+
+#define OMAP3_ISP_SHIFT			5
+#define OMAP3_ISP_MASK			(1<< OMAP3_ISP_SHIFT)
+#define		FEAT_ISP		0
+#define		FEAT_ISP_NONE		1
+
+#define OMAP3_NEON_SHIFT		4
+#define OMAP3_NEON_MASK			(1<< OMAP3_NEON_SHIFT)
+#define		FEAT_NEON		0
+#define		FEAT_NEON_NONE		1
+
+
 #ifndef __ASSEMBLY__
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 		defined(CONFIG_ARCH_OMAP4)
@@ -212,6 +301,15 @@ extern u32 omap_ctrl_readl(u16 offset);
 extern void omap_ctrl_writeb(u8 val, u16 offset);
 extern void omap_ctrl_writew(u16 val, u16 offset);
 extern void omap_ctrl_writel(u32 val, u16 offset);
+
+extern void omap3_save_scratchpad_contents(void);
+extern void omap3_clear_scratchpad_contents(void);
+extern u32 *get_restore_pointer(void);
+extern u32 *get_es3_restore_pointer(void);
+extern u32 omap3_arm_context[128];
+extern void omap3_control_save_context(void);
+extern void omap3_control_restore_context(void);
+
 #else
 #define omap_ctrl_base_get()		0
 #define omap_ctrl_readb(x)		0
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index f129efb3075e..9a028bdebb06 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -30,6 +30,8 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
 
+#include <linux/bitops.h>
+
 /*
  * Omap device type i.e. EMU/HS/TST/GP/BAD
  */
@@ -57,6 +59,23 @@ struct omap_chip_id {
 unsigned int omap_rev(void);
 
 /*
+ * Define CPU revision bits
+ *
+ * Verbose meaning of the revision bits may be different for a silicon
+ * family. This difference can be handled separately.
+ */
+#define OMAP_REVBITS_00		0x00
+#define OMAP_REVBITS_10		0x10
+#define OMAP_REVBITS_20		0x20
+#define OMAP_REVBITS_30		0x30
+#define OMAP_REVBITS_40		0x40
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
+
+/*
  * Test if multicore OMAP support is needed
  */
 #undef MULTI_OMAP1
@@ -157,10 +176,13 @@ IS_OMAP_CLASS(15xx, 0x15)
 IS_OMAP_CLASS(16xx, 0x16)
 IS_OMAP_CLASS(24xx, 0x24)
 IS_OMAP_CLASS(34xx, 0x34)
+IS_OMAP_CLASS(44xx, 0x44)
 
 IS_OMAP_SUBCLASS(242x, 0x242)
 IS_OMAP_SUBCLASS(243x, 0x243)
 IS_OMAP_SUBCLASS(343x, 0x343)
+IS_OMAP_SUBCLASS(363x, 0x363)
+IS_OMAP_SUBCLASS(443x, 0x443)
 
 #define cpu_is_omap7xx()		0
 #define cpu_is_omap15xx()		0
@@ -264,6 +286,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
  * cpu_is_omap2423():	True for OMAP2423
  * cpu_is_omap2430():	True for OMAP2430
  * cpu_is_omap3430():	True for OMAP3430
+ * cpu_is_omap3505():	True for OMAP3505
+ * cpu_is_omap3517():	True for OMAP3517
  */
 #define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
 
@@ -287,6 +311,8 @@ IS_OMAP_TYPE(2422, 0x2422)
 IS_OMAP_TYPE(2423, 0x2423)
 IS_OMAP_TYPE(2430, 0x2430)
 IS_OMAP_TYPE(3430, 0x3430)
+IS_OMAP_TYPE(3505, 0x3505)
+IS_OMAP_TYPE(3517, 0x3517)
 
 #define cpu_is_omap310()		0
 #define cpu_is_omap730()		0
@@ -301,7 +327,14 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_is_omap2422()		0
 #define cpu_is_omap2423()		0
 #define cpu_is_omap2430()		0
+#define cpu_is_omap3503()		0
+#define cpu_is_omap3515()		0
+#define cpu_is_omap3525()		0
+#define cpu_is_omap3530()		0
+#define cpu_is_omap3505()		0
+#define cpu_is_omap3517()		0
 #define cpu_is_omap3430()		0
+#define cpu_is_omap3630()		0
 
 /*
  * Whether we have MULTI_OMAP1 or not, we still need to distinguish
@@ -351,14 +384,34 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 #if defined(CONFIG_ARCH_OMAP34XX)
 # undef cpu_is_omap3430
+# undef cpu_is_omap3503
+# undef cpu_is_omap3515
+# undef cpu_is_omap3525
+# undef cpu_is_omap3530
+# undef cpu_is_omap3505
+# undef cpu_is_omap3517
 # define cpu_is_omap3430()		is_omap3430()
+# define cpu_is_omap3503()		(cpu_is_omap3430() &&		\
+						(!omap3_has_iva()) &&	\
+						(!omap3_has_sgx()))
+# define cpu_is_omap3515()		(cpu_is_omap3430() &&		\
+						(!omap3_has_iva()) &&	\
+						(omap3_has_sgx()))
+# define cpu_is_omap3525()		(cpu_is_omap3430() &&		\
+						(!omap3_has_sgx()) &&	\
+						(omap3_has_iva()))
+# define cpu_is_omap3530()		(cpu_is_omap3430())
+# define cpu_is_omap3505()		is_omap3505()
+# define cpu_is_omap3517()		is_omap3517()
+# undef cpu_is_omap3630
+# define cpu_is_omap3630()		is_omap363x()
 #endif
 
 # if defined(CONFIG_ARCH_OMAP4)
 # undef cpu_is_omap44xx
 # undef cpu_is_omap443x
-# define cpu_is_omap44xx()		1
-# define cpu_is_omap443x()		1
+# define cpu_is_omap44xx()		is_omap44xx()
+# define cpu_is_omap443x()		is_omap443x()
 # endif
 
 /* Macros to detect if we have OMAP1 or OMAP2 */
@@ -382,7 +435,18 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP3430_REV_ES3_0	0x34303034
 #define OMAP3430_REV_ES3_1	0x34304034
 
-#define OMAP443X_CLASS		0x44300034
+#define OMAP3630_REV_ES1_0	0x36300034
+
+#define OMAP35XX_CLASS		0x35000034
+#define OMAP3503_REV(v)		(OMAP35XX_CLASS | (0x3503 << 16) | (v << 8))
+#define OMAP3515_REV(v)		(OMAP35XX_CLASS | (0x3515 << 16) | (v << 8))
+#define OMAP3525_REV(v)		(OMAP35XX_CLASS | (0x3525 << 16) | (v << 8))
+#define OMAP3530_REV(v)		(OMAP35XX_CLASS | (0x3530 << 16) | (v << 8))
+#define OMAP3505_REV(v)		(OMAP35XX_CLASS | (0x3505 << 16) | (v << 8))
+#define OMAP3517_REV(v)		(OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
+
+#define OMAP443X_CLASS		0x44300044
+#define OMAP4430_REV_ES1_0	0x44300044
 
 /*
  * omap_chip bits
@@ -405,6 +469,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define CHIP_IS_OMAP3430ES2		(1 << 4)
 #define CHIP_IS_OMAP3430ES3_0		(1 << 5)
 #define CHIP_IS_OMAP3430ES3_1		(1 << 6)
+#define CHIP_IS_OMAP3630ES1		(1 << 7)
 
 #define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
@@ -416,11 +481,36 @@ IS_OMAP_TYPE(3430, 0x3430)
  */
 #define CHIP_GE_OMAP3430ES2		(CHIP_IS_OMAP3430ES2 | \
 					 CHIP_IS_OMAP3430ES3_0 | \
-					 CHIP_IS_OMAP3430ES3_1)
-#define CHIP_GE_OMAP3430ES3_1		(CHIP_IS_OMAP3430ES3_1)
+					 CHIP_IS_OMAP3430ES3_1 | \
+					 CHIP_IS_OMAP3630ES1)
+#define CHIP_GE_OMAP3430ES3_1		(CHIP_IS_OMAP3430ES3_1 | \
+					 CHIP_IS_OMAP3630ES1)
 
 
 int omap_chip_is(struct omap_chip_id oci);
 void omap2_check_revision(void);
 
+/*
+ * Runtime detection of OMAP3 features
+ */
+extern u32 omap3_features;
+
+#define OMAP3_HAS_L2CACHE		BIT(0)
+#define OMAP3_HAS_IVA			BIT(1)
+#define OMAP3_HAS_SGX			BIT(2)
+#define OMAP3_HAS_NEON			BIT(3)
+#define OMAP3_HAS_ISP			BIT(4)
+
+#define OMAP3_HAS_FEATURE(feat,flag)			\
+static inline unsigned int omap3_has_ ##feat(void)	\
+{							\
+	return (omap3_features & OMAP3_HAS_ ##flag);	\
+}							\
+
+OMAP3_HAS_FEATURE(l2cache, L2CACHE)
+OMAP3_HAS_FEATURE(sgx, SGX)
+OMAP3_HAS_FEATURE(iva, IVA)
+OMAP3_HAS_FEATURE(neon, NEON)
+OMAP3_HAS_FEATURE(isp, ISP)
+
 #endif
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
new file mode 100644
index 000000000000..c66e464732df
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -0,0 +1,575 @@
+/*
+ * linux/include/asm-arm/arch-omap/display.h
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ASM_ARCH_OMAP_DISPLAY_H
+#define __ASM_ARCH_OMAP_DISPLAY_H
+
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <asm/atomic.h>
+
+#define DISPC_IRQ_FRAMEDONE		(1 << 0)
+#define DISPC_IRQ_VSYNC			(1 << 1)
+#define DISPC_IRQ_EVSYNC_EVEN		(1 << 2)
+#define DISPC_IRQ_EVSYNC_ODD		(1 << 3)
+#define DISPC_IRQ_ACBIAS_COUNT_STAT	(1 << 4)
+#define DISPC_IRQ_PROG_LINE_NUM		(1 << 5)
+#define DISPC_IRQ_GFX_FIFO_UNDERFLOW	(1 << 6)
+#define DISPC_IRQ_GFX_END_WIN		(1 << 7)
+#define DISPC_IRQ_PAL_GAMMA_MASK	(1 << 8)
+#define DISPC_IRQ_OCP_ERR		(1 << 9)
+#define DISPC_IRQ_VID1_FIFO_UNDERFLOW	(1 << 10)
+#define DISPC_IRQ_VID1_END_WIN		(1 << 11)
+#define DISPC_IRQ_VID2_FIFO_UNDERFLOW	(1 << 12)
+#define DISPC_IRQ_VID2_END_WIN		(1 << 13)
+#define DISPC_IRQ_SYNC_LOST		(1 << 14)
+#define DISPC_IRQ_SYNC_LOST_DIGIT	(1 << 15)
+#define DISPC_IRQ_WAKEUP		(1 << 16)
+
+struct omap_dss_device;
+struct omap_overlay_manager;
+
+enum omap_display_type {
+	OMAP_DISPLAY_TYPE_NONE		= 0,
+	OMAP_DISPLAY_TYPE_DPI		= 1 << 0,
+	OMAP_DISPLAY_TYPE_DBI		= 1 << 1,
+	OMAP_DISPLAY_TYPE_SDI		= 1 << 2,
+	OMAP_DISPLAY_TYPE_DSI		= 1 << 3,
+	OMAP_DISPLAY_TYPE_VENC		= 1 << 4,
+};
+
+enum omap_plane {
+	OMAP_DSS_GFX	= 0,
+	OMAP_DSS_VIDEO1	= 1,
+	OMAP_DSS_VIDEO2	= 2
+};
+
+enum omap_channel {
+	OMAP_DSS_CHANNEL_LCD	= 0,
+	OMAP_DSS_CHANNEL_DIGIT	= 1,
+};
+
+enum omap_color_mode {
+	OMAP_DSS_COLOR_CLUT1	= 1 << 0,  /* BITMAP 1 */
+	OMAP_DSS_COLOR_CLUT2	= 1 << 1,  /* BITMAP 2 */
+	OMAP_DSS_COLOR_CLUT4	= 1 << 2,  /* BITMAP 4 */
+	OMAP_DSS_COLOR_CLUT8	= 1 << 3,  /* BITMAP 8 */
+	OMAP_DSS_COLOR_RGB12U	= 1 << 4,  /* RGB12, 16-bit container */
+	OMAP_DSS_COLOR_ARGB16	= 1 << 5,  /* ARGB16 */
+	OMAP_DSS_COLOR_RGB16	= 1 << 6,  /* RGB16 */
+	OMAP_DSS_COLOR_RGB24U	= 1 << 7,  /* RGB24, 32-bit container */
+	OMAP_DSS_COLOR_RGB24P	= 1 << 8,  /* RGB24, 24-bit container */
+	OMAP_DSS_COLOR_YUV2	= 1 << 9,  /* YUV2 4:2:2 co-sited */
+	OMAP_DSS_COLOR_UYVY	= 1 << 10, /* UYVY 4:2:2 co-sited */
+	OMAP_DSS_COLOR_ARGB32	= 1 << 11, /* ARGB32 */
+	OMAP_DSS_COLOR_RGBA32	= 1 << 12, /* RGBA32 */
+	OMAP_DSS_COLOR_RGBX32	= 1 << 13, /* RGBx32 */
+
+	OMAP_DSS_COLOR_GFX_OMAP2 =
+		OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
+		OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 |
+		OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P,
+
+	OMAP_DSS_COLOR_VID_OMAP2 =
+		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
+		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 |
+		OMAP_DSS_COLOR_UYVY,
+
+	OMAP_DSS_COLOR_GFX_OMAP3 =
+		OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
+		OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
+		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
+		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
+		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
+
+	OMAP_DSS_COLOR_VID1_OMAP3 =
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 |
+		OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P |
+		OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY,
+
+	OMAP_DSS_COLOR_VID2_OMAP3 =
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
+		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
+		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 |
+		OMAP_DSS_COLOR_UYVY | OMAP_DSS_COLOR_ARGB32 |
+		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
+};
+
+enum omap_lcd_display_type {
+	OMAP_DSS_LCD_DISPLAY_STN,
+	OMAP_DSS_LCD_DISPLAY_TFT,
+};
+
+enum omap_dss_load_mode {
+	OMAP_DSS_LOAD_CLUT_AND_FRAME	= 0,
+	OMAP_DSS_LOAD_CLUT_ONLY		= 1,
+	OMAP_DSS_LOAD_FRAME_ONLY	= 2,
+	OMAP_DSS_LOAD_CLUT_ONCE_FRAME	= 3,
+};
+
+enum omap_dss_trans_key_type {
+	OMAP_DSS_COLOR_KEY_GFX_DST = 0,
+	OMAP_DSS_COLOR_KEY_VID_SRC = 1,
+};
+
+enum omap_rfbi_te_mode {
+	OMAP_DSS_RFBI_TE_MODE_1 = 1,
+	OMAP_DSS_RFBI_TE_MODE_2 = 2,
+};
+
+enum omap_panel_config {
+	OMAP_DSS_LCD_IVS		= 1<<0,
+	OMAP_DSS_LCD_IHS		= 1<<1,
+	OMAP_DSS_LCD_IPC		= 1<<2,
+	OMAP_DSS_LCD_IEO		= 1<<3,
+	OMAP_DSS_LCD_RF			= 1<<4,
+	OMAP_DSS_LCD_ONOFF		= 1<<5,
+
+	OMAP_DSS_LCD_TFT		= 1<<20,
+};
+
+enum omap_dss_venc_type {
+	OMAP_DSS_VENC_TYPE_COMPOSITE,
+	OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+enum omap_display_caps {
+	OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE	= 1 << 0,
+	OMAP_DSS_DISPLAY_CAP_TEAR_ELIM		= 1 << 1,
+};
+
+enum omap_dss_update_mode {
+	OMAP_DSS_UPDATE_DISABLED = 0,
+	OMAP_DSS_UPDATE_AUTO,
+	OMAP_DSS_UPDATE_MANUAL,
+};
+
+enum omap_dss_display_state {
+	OMAP_DSS_DISPLAY_DISABLED = 0,
+	OMAP_DSS_DISPLAY_ACTIVE,
+	OMAP_DSS_DISPLAY_SUSPENDED,
+};
+
+/* XXX perhaps this should be removed */
+enum omap_dss_overlay_managers {
+	OMAP_DSS_OVL_MGR_LCD,
+	OMAP_DSS_OVL_MGR_TV,
+};
+
+enum omap_dss_rotation_type {
+	OMAP_DSS_ROT_DMA = 0,
+	OMAP_DSS_ROT_VRFB = 1,
+};
+
+/* clockwise rotation angle */
+enum omap_dss_rotation_angle {
+	OMAP_DSS_ROT_0   = 0,
+	OMAP_DSS_ROT_90  = 1,
+	OMAP_DSS_ROT_180 = 2,
+	OMAP_DSS_ROT_270 = 3,
+};
+
+enum omap_overlay_caps {
+	OMAP_DSS_OVL_CAP_SCALE = 1 << 0,
+	OMAP_DSS_OVL_CAP_DISPC = 1 << 1,
+};
+
+enum omap_overlay_manager_caps {
+	OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0,
+};
+
+/* RFBI */
+
+struct rfbi_timings {
+	int cs_on_time;
+	int cs_off_time;
+	int we_on_time;
+	int we_off_time;
+	int re_on_time;
+	int re_off_time;
+	int we_cycle_time;
+	int re_cycle_time;
+	int cs_pulse_width;
+	int access_time;
+
+	int clk_div;
+
+	u32 tim[5];             /* set by rfbi_convert_timings() */
+
+	int converted;
+};
+
+void omap_rfbi_write_command(const void *buf, u32 len);
+void omap_rfbi_read_data(void *buf, u32 len);
+void omap_rfbi_write_data(const void *buf, u32 len);
+void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
+		u16 x, u16 y,
+		u16 w, u16 h);
+int omap_rfbi_enable_te(bool enable, unsigned line);
+int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
+			     unsigned hs_pulse_time, unsigned vs_pulse_time,
+			     int hs_pol_inv, int vs_pol_inv, int extif_div);
+
+/* DSI */
+void dsi_bus_lock(void);
+void dsi_bus_unlock(void);
+int dsi_vc_dcs_write(int channel, u8 *data, int len);
+int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len);
+int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen);
+int dsi_vc_set_max_rx_packet_size(int channel, u16 len);
+int dsi_vc_send_null(int channel);
+int dsi_vc_send_bta_sync(int channel);
+
+/* Board specific data */
+struct omap_dss_board_info {
+	int (*get_last_off_on_transaction_id)(struct device *dev);
+	int num_devices;
+	struct omap_dss_device **devices;
+	struct omap_dss_device *default_device;
+};
+
+struct omap_video_timings {
+	/* Unit: pixels */
+	u16 x_res;
+	/* Unit: pixels */
+	u16 y_res;
+	/* Unit: KHz */
+	u32 pixel_clock;
+	/* Unit: pixel clocks */
+	u16 hsw;	/* Horizontal synchronization pulse width */
+	/* Unit: pixel clocks */
+	u16 hfp;	/* Horizontal front porch */
+	/* Unit: pixel clocks */
+	u16 hbp;	/* Horizontal back porch */
+	/* Unit: line clocks */
+	u16 vsw;	/* Vertical synchronization pulse width */
+	/* Unit: line clocks */
+	u16 vfp;	/* Vertical front porch */
+	/* Unit: line clocks */
+	u16 vbp;	/* Vertical back porch */
+};
+
+#ifdef CONFIG_OMAP2_DSS_VENC
+/* Hardcoded timings for tv modes. Venc only uses these to
+ * identify the mode, and does not actually use the configs
+ * itself. However, the configs should be something that
+ * a normal monitor can also show */
+const extern struct omap_video_timings omap_dss_pal_timings;
+const extern struct omap_video_timings omap_dss_ntsc_timings;
+#endif
+
+struct omap_overlay_info {
+	bool enabled;
+
+	u32 paddr;
+	void __iomem *vaddr;
+	u16 screen_width;
+	u16 width;
+	u16 height;
+	enum omap_color_mode color_mode;
+	u8 rotation;
+	enum omap_dss_rotation_type rotation_type;
+	bool mirror;
+
+	u16 pos_x;
+	u16 pos_y;
+	u16 out_width;	/* if 0, out_width == width */
+	u16 out_height;	/* if 0, out_height == height */
+	u8 global_alpha;
+};
+
+struct omap_overlay {
+	struct kobject kobj;
+	struct list_head list;
+
+	/* static fields */
+	const char *name;
+	int id;
+	enum omap_color_mode supported_modes;
+	enum omap_overlay_caps caps;
+
+	/* dynamic fields */
+	struct omap_overlay_manager *manager;
+	struct omap_overlay_info info;
+
+	/* if true, info has been changed, but not applied() yet */
+	bool info_dirty;
+
+	int (*set_manager)(struct omap_overlay *ovl,
+		struct omap_overlay_manager *mgr);
+	int (*unset_manager)(struct omap_overlay *ovl);
+
+	int (*set_overlay_info)(struct omap_overlay *ovl,
+			struct omap_overlay_info *info);
+	void (*get_overlay_info)(struct omap_overlay *ovl,
+			struct omap_overlay_info *info);
+
+	int (*wait_for_go)(struct omap_overlay *ovl);
+};
+
+struct omap_overlay_manager_info {
+	u32 default_color;
+
+	enum omap_dss_trans_key_type trans_key_type;
+	u32 trans_key;
+	bool trans_enabled;
+
+	bool alpha_enabled;
+};
+
+struct omap_overlay_manager {
+	struct kobject kobj;
+	struct list_head list;
+
+	/* static fields */
+	const char *name;
+	int id;
+	enum omap_overlay_manager_caps caps;
+	int num_overlays;
+	struct omap_overlay **overlays;
+	enum omap_display_type supported_displays;
+
+	/* dynamic fields */
+	struct omap_dss_device *device;
+	struct omap_overlay_manager_info info;
+
+	bool device_changed;
+	/* if true, info has been changed but not applied() yet */
+	bool info_dirty;
+
+	int (*set_device)(struct omap_overlay_manager *mgr,
+		struct omap_dss_device *dssdev);
+	int (*unset_device)(struct omap_overlay_manager *mgr);
+
+	int (*set_manager_info)(struct omap_overlay_manager *mgr,
+			struct omap_overlay_manager_info *info);
+	void (*get_manager_info)(struct omap_overlay_manager *mgr,
+			struct omap_overlay_manager_info *info);
+
+	int (*apply)(struct omap_overlay_manager *mgr);
+	int (*wait_for_go)(struct omap_overlay_manager *mgr);
+};
+
+struct omap_dss_device {
+	struct device dev;
+
+	enum omap_display_type type;
+
+	union {
+		struct {
+			u8 data_lines;
+		} dpi;
+
+		struct {
+			u8 channel;
+			u8 data_lines;
+		} rfbi;
+
+		struct {
+			u8 datapairs;
+		} sdi;
+
+		struct {
+			u8 clk_lane;
+			u8 clk_pol;
+			u8 data1_lane;
+			u8 data1_pol;
+			u8 data2_lane;
+			u8 data2_pol;
+
+			struct {
+				u16 regn;
+				u16 regm;
+				u16 regm3;
+				u16 regm4;
+
+				u16 lp_clk_div;
+
+				u16 lck_div;
+				u16 pck_div;
+			} div;
+
+			bool ext_te;
+			u8 ext_te_gpio;
+		} dsi;
+
+		struct {
+			enum omap_dss_venc_type type;
+			bool invert_polarity;
+		} venc;
+	} phy;
+
+	struct {
+		struct omap_video_timings timings;
+
+		int acbi;	/* ac-bias pin transitions per interrupt */
+		/* Unit: line clocks */
+		int acb;	/* ac-bias pin frequency */
+
+		enum omap_panel_config config;
+
+		u8 recommended_bpp;
+
+		struct omap_dss_device *ctrl;
+	} panel;
+
+	struct {
+		u8 pixel_size;
+		struct rfbi_timings rfbi_timings;
+		struct omap_dss_device *panel;
+	} ctrl;
+
+	int reset_gpio;
+
+	int max_backlight_level;
+
+	const char *name;
+
+	/* used to match device to driver */
+	const char *driver_name;
+
+	void *data;
+
+	struct omap_dss_driver *driver;
+
+	/* helper variable for driver suspend/resume */
+	bool activate_after_resume;
+
+	enum omap_display_caps caps;
+
+	struct omap_overlay_manager *manager;
+
+	enum omap_dss_display_state state;
+
+	int (*enable)(struct omap_dss_device *dssdev);
+	void (*disable)(struct omap_dss_device *dssdev);
+
+	int (*suspend)(struct omap_dss_device *dssdev);
+	int (*resume)(struct omap_dss_device *dssdev);
+
+	void (*get_resolution)(struct omap_dss_device *dssdev,
+			u16 *xres, u16 *yres);
+	int (*get_recommended_bpp)(struct omap_dss_device *dssdev);
+
+	int (*check_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*set_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*get_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	int (*update)(struct omap_dss_device *dssdev,
+			       u16 x, u16 y, u16 w, u16 h);
+	int (*sync)(struct omap_dss_device *dssdev);
+	int (*wait_vsync)(struct omap_dss_device *dssdev);
+
+	int (*set_update_mode)(struct omap_dss_device *dssdev,
+			enum omap_dss_update_mode);
+	enum omap_dss_update_mode (*get_update_mode)
+		(struct omap_dss_device *dssdev);
+
+	int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
+	int (*get_te)(struct omap_dss_device *dssdev);
+
+	u8 (*get_rotate)(struct omap_dss_device *dssdev);
+	int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
+
+	bool (*get_mirror)(struct omap_dss_device *dssdev);
+	int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
+
+	int (*run_test)(struct omap_dss_device *dssdev, int test);
+	int (*memory_read)(struct omap_dss_device *dssdev,
+			void *buf, size_t size,
+			u16 x, u16 y, u16 w, u16 h);
+
+	int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
+	u32 (*get_wss)(struct omap_dss_device *dssdev);
+
+	/* platform specific  */
+	int (*platform_enable)(struct omap_dss_device *dssdev);
+	void (*platform_disable)(struct omap_dss_device *dssdev);
+	int (*set_backlight)(struct omap_dss_device *dssdev, int level);
+	int (*get_backlight)(struct omap_dss_device *dssdev);
+};
+
+struct omap_dss_driver {
+	struct device_driver driver;
+
+	int (*probe)(struct omap_dss_device *);
+	void (*remove)(struct omap_dss_device *);
+
+	int (*enable)(struct omap_dss_device *display);
+	void (*disable)(struct omap_dss_device *display);
+	int (*suspend)(struct omap_dss_device *display);
+	int (*resume)(struct omap_dss_device *display);
+	int (*run_test)(struct omap_dss_device *display, int test);
+
+	void (*setup_update)(struct omap_dss_device *dssdev,
+			u16 x, u16 y, u16 w, u16 h);
+
+	int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
+	int (*wait_for_te)(struct omap_dss_device *dssdev);
+
+	u8 (*get_rotate)(struct omap_dss_device *dssdev);
+	int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
+
+	bool (*get_mirror)(struct omap_dss_device *dssdev);
+	int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
+
+	int (*memory_read)(struct omap_dss_device *dssdev,
+			void *buf, size_t size,
+			u16 x, u16 y, u16 w, u16 h);
+};
+
+int omap_dss_register_driver(struct omap_dss_driver *);
+void omap_dss_unregister_driver(struct omap_dss_driver *);
+
+int omap_dss_register_device(struct omap_dss_device *);
+void omap_dss_unregister_device(struct omap_dss_device *);
+
+void omap_dss_get_device(struct omap_dss_device *dssdev);
+void omap_dss_put_device(struct omap_dss_device *dssdev);
+#define for_each_dss_dev(d) while ((d = omap_dss_get_next_device(d)) != NULL)
+struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from);
+struct omap_dss_device *omap_dss_find_device(void *data,
+		int (*match)(struct omap_dss_device *dssdev, void *data));
+
+int omap_dss_start_device(struct omap_dss_device *dssdev);
+void omap_dss_stop_device(struct omap_dss_device *dssdev);
+
+int omap_dss_get_num_overlay_managers(void);
+struct omap_overlay_manager *omap_dss_get_overlay_manager(int num);
+
+int omap_dss_get_num_overlays(void);
+struct omap_overlay *omap_dss_get_overlay(int num);
+
+typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
+int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
+int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
+
+int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout);
+int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
+		unsigned long timeout);
+
+#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver)
+#define to_dss_device(x) container_of((x), struct omap_dss_device, dev)
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index 72f680b7180d..4ede9e17a0be 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -401,33 +401,6 @@
 
 /*----------------------------------------------------------------------------*/
 
-/* Hardware registers for LCD DMA */
-#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
-#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
-#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
-#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
-#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
-#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
-
-#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
-#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
-#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
-#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
-#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
-#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
-#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
-#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
-#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
-#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
-#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
-#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
-#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
-#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
-#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
-
 #define OMAP1_DMA_TOUT_IRQ		(1 << 0)
 #define OMAP_DMA_DROP_IRQ		(1 << 1)
 #define OMAP_DMA_HALF_IRQ		(1 << 2)
@@ -441,6 +414,8 @@
 #define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
 #define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
 
+#define OMAP_DMA_CCR_EN			(1 << 7)
+
 #define OMAP_DMA_DATA_TYPE_S8		0x00
 #define OMAP_DMA_DATA_TYPE_S16		0x01
 #define OMAP_DMA_DATA_TYPE_S32		0x02
@@ -503,14 +478,6 @@
 #define DMA_CH_PRIO_HIGH		0x1
 #define DMA_CH_PRIO_LOW			0x0 /* Def */
 
-/* LCD DMA block numbers */
-enum {
-	OMAP_LCD_DMA_B1_TOP,
-	OMAP_LCD_DMA_B1_BOTTOM,
-	OMAP_LCD_DMA_B2_TOP,
-	OMAP_LCD_DMA_B2_BOTTOM
-};
-
 enum omap_dma_burst_mode {
 	OMAP_DMA_DATA_BURST_DIS = 0,
 	OMAP_DMA_DATA_BURST_4,
@@ -633,6 +600,11 @@ extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
 extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
 extern int omap_get_dma_index(int lch, int *ei, int *fi);
 
+void omap_dma_global_context_save(void);
+void omap_dma_global_context_restore(void);
+
+extern void omap_dma_disable_irq(int lch);
+
 /* Chaining APIs */
 #ifndef CONFIG_ARCH_OMAP1
 extern int omap_request_dma_chain(int dev_id, const char *dev_name,
@@ -656,20 +628,13 @@ extern int omap_modify_dma_chain_params(int chain_id,
 extern int omap_dma_chain_status(int chain_id);
 #endif
 
-/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-				void *data);
-extern void omap_free_lcd_dma(void);
-extern void omap_setup_lcd_dma(void);
-extern void omap_enable_lcd_dma(void);
-extern void omap_stop_lcd_dma(void);
-extern void omap_set_lcd_dma_ext_controller(int external);
-extern void omap_set_lcd_dma_single_transfer(int single);
-extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-				int data_type);
-extern void omap_set_lcd_dma_b1_rotation(int rotate);
-extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
-extern void omap_set_lcd_dma_b1_mirror(int mirror);
-extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP)
+#include <mach/lcd_dma.h>
+#else
+static inline int omap_lcd_dma_running(void)
+{
+	return 0;
+}
+#endif
 
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 20f1054c0a80..20f1054c0a80 100644
--- a/arch/arm/plat-omap/include/mach/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
diff --git a/arch/arm/plat-omap/include/mach/dsp_common.h b/arch/arm/plat-omap/include/plat/dsp_common.h
index da97736f3efa..da97736f3efa 100644
--- a/arch/arm/plat-omap/include/mach/dsp_common.h
+++ b/arch/arm/plat-omap/include/plat/dsp_common.h
diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
index f1864a652f7a..f1864a652f7a 100644
--- a/arch/arm/plat-omap/include/mach/fpga.h
+++ b/arch/arm/plat-omap/include/plat/fpga.h
diff --git a/arch/arm/plat-omap/include/mach/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h
index 10da0e07c0cf..10da0e07c0cf 100644
--- a/arch/arm/plat-omap/include/mach/gpio-switch.h
+++ b/arch/arm/plat-omap/include/plat/gpio-switch.h
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 633ff688b928..de7c54731cbe 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -76,7 +76,8 @@ extern void omap2_gpio_prepare_for_retention(void);
 extern void omap2_gpio_resume_after_retention(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
-
+extern void omap_gpio_save_context(void);
+extern void omap_gpio_restore_context(void);
 /*-------------------------------------------------------------------------*/
 
 /* Wrappers for "new style" GPIO calls, using the new infrastructure
diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
index b64fbee4d567..b64fbee4d567 100644
--- a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+++ b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 9c99cda77ba6..e081338e0b23 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -45,13 +45,14 @@
 #define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
 #define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
 #define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(1)
+#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(2)
 #define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
 #define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
 #define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
 #define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
 #define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
 #define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
+#define GPMC_CONFIG7_CSVALID		(1 << 6)
 
 /*
  * Note that all values in this struct are in nanoseconds, while
@@ -107,6 +108,8 @@ extern int gpmc_prefetch_enable(int cs, int dma_mode,
 					unsigned int u32_count, int is_write);
 extern void gpmc_prefetch_reset(void);
 extern int gpmc_prefetch_status(void);
+extern void omap3_gpmc_save_context(void);
+extern void omap3_gpmc_restore_context(void);
 extern void __init gpmc_init(void);
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
index 26c1fbff08aa..d5b26adfb890 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/plat/hardware.h
@@ -39,9 +39,9 @@
 #include <asm/sizes.h>
 #ifndef __ASSEMBLER__
 #include <asm/types.h>
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 #endif
-#include <mach/serial.h>
+#include <plat/serial.h>
 
 /*
  * ---------------------------------------------------------------------------
@@ -280,11 +280,11 @@
  * ---------------------------------------------------------------------------
  */
 
-#include "omap730.h"
-#include "omap1510.h"
-#include "omap16xx.h"
-#include "omap24xx.h"
-#include "omap34xx.h"
-#include "omap44xx.h"
+#include <plat/omap7xx.h>
+#include <plat/omap1510.h>
+#include <plat/omap16xx.h>
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
+#include <plat/omap44xx.h>
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h
index 886248d32b49..886248d32b49 100644
--- a/arch/arm/plat-omap/include/mach/hwa742.h
+++ b/arch/arm/plat-omap/include/plat/hwa742.h
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
new file mode 100644
index 000000000000..585d9ca68b97
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -0,0 +1,39 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/i2c.h>
+
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len)
+{
+	return 0;
+}
+#endif
+
+int omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len);
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/plat/io.h
index 8d32df32b0b1..7e5319f907d1 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -63,8 +63,24 @@
 #define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
 #define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
 
-#define OMAP2_IO_OFFSET		0x90000000
-#define OMAP2_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
+#define OMAP2_L3_IO_OFFSET	0x90000000
+#define OMAP2_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
+
+
+#define OMAP2_L4_IO_OFFSET	0xb2000000
+#define OMAP2_L4_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
+
+#define OMAP4_L3_IO_OFFSET	0xb4000000
+#define OMAP4_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
+
+#define OMAP4_L3_PER_IO_OFFSET	0xb1100000
+#define OMAP4_L3_PER_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
+
+#define OMAP4_GPMC_IO_OFFSET		0xa9000000
+#define OMAP4_GPMC_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
+
+#define OMAP2_EMU_IO_OFFSET		0xaa800000	/* Emulation */
+#define OMAP2_EMU_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
 
 /*
  * ----------------------------------------------------------------------------
@@ -83,24 +99,27 @@
  */
 
 /* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
-#define L3_24XX_VIRT	0xf8000000
+#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 --> 0xf8000000*/
+#define L3_24XX_VIRT	(L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
 #define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
-#define L4_24XX_VIRT	0xd8000000
+#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 --> 0xfa000000 */
+#define L4_24XX_VIRT	(L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
 
-#define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
-#define L4_WK_243X_VIRT		0xd9000000
+#define L4_WK_243X_PHYS		L4_WK_243X_BASE	/* 0x49000000 --> 0xfb000000 */
+#define L4_WK_243X_VIRT		(L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_WK_243X_SIZE		SZ_1M
-#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
-#define OMAP243X_GPMC_VIRT	0xFE000000
+#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE
+#define OMAP243X_GPMC_VIRT	(OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+						/* 0x6e000000 --> 0xfe000000 */
 #define OMAP243X_GPMC_SIZE	SZ_1M
 #define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
-#define OMAP243X_SDRC_VIRT	0xFD000000
+						/* 0x6D000000 --> 0xfd000000 */
+#define OMAP243X_SDRC_VIRT	(OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP243X_SDRC_SIZE	SZ_1M
 #define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
-#define OMAP243X_SMS_VIRT	0xFC000000
+						/* 0x6c000000 --> 0xfc000000 */
+#define OMAP243X_SMS_VIRT	(OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP243X_SMS_SIZE	SZ_1M
 
 /* DSP */
@@ -121,12 +140,12 @@
  */
 
 /* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
-#define L3_34XX_VIRT		0xf8000000
+#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 --> 0xf8000000 */
+#define L3_34XX_VIRT		(L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
 #define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
 
-#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
-#define L4_34XX_VIRT		0xd8000000
+#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 --> 0xfa000000 */
+#define L4_34XX_VIRT		(L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
 
 /*
@@ -134,28 +153,33 @@
  * VPOM3430 was not working for Int controller
  */
 
-#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
-#define L4_WK_34XX_VIRT		0xd8300000
+#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE	/* 0x48300000 --> 0xfa300000 */
+#define L4_WK_34XX_VIRT		(L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_WK_34XX_SIZE		SZ_1M
 
-#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
-#define L4_PER_34XX_VIRT	0xd9000000
+#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE
+						/* 0x49000000 --> 0xfb000000 */
+#define L4_PER_34XX_VIRT	(L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_PER_34XX_SIZE	SZ_1M
 
-#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
-#define L4_EMU_34XX_VIRT	0xe4000000
-#define L4_EMU_34XX_SIZE	SZ_64M
+#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE
+						/* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_34XX_VIRT	(L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_34XX_SIZE	SZ_8M
 
-#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
-#define OMAP34XX_GPMC_VIRT	0xFE000000
+#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE
+						/* 0x6e000000 --> 0xfe000000 */
+#define OMAP34XX_GPMC_VIRT	(OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP34XX_GPMC_SIZE	SZ_1M
 
-#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
-#define OMAP343X_SMS_VIRT	0xFC000000
+#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE
+						/* 0x6c000000 --> 0xfc000000 */
+#define OMAP343X_SMS_VIRT	(OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP343X_SMS_SIZE	SZ_1M
 
-#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
-#define OMAP343X_SDRC_VIRT	0xFD000000
+#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE
+						/* 0x6D000000 --> 0xfd000000 */
+#define OMAP343X_SDRC_VIRT	(OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP343X_SDRC_SIZE	SZ_1M
 
 /* DSP */
@@ -176,32 +200,54 @@
  */
 
 /* We map both L3 and L4 on OMAP4 */
-#define L3_44XX_PHYS		L3_44XX_BASE
-#define L3_44XX_VIRT		0xd4000000
+#define L3_44XX_PHYS		L3_44XX_BASE	/* 0x44000000 --> 0xf8000000 */
+#define L3_44XX_VIRT		(L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
 #define L3_44XX_SIZE		SZ_1M
 
-#define L4_44XX_PHYS		L4_44XX_BASE
-#define L4_44XX_VIRT		0xda000000
+#define L4_44XX_PHYS		L4_44XX_BASE	/* 0x4a000000 --> 0xfc000000 */
+#define L4_44XX_VIRT		(L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_44XX_SIZE		SZ_4M
 
 
-#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE
-#define L4_WK_44XX_VIRT		0xda300000
+#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE	/* 0x4a300000 --> 0xfc300000 */
+#define L4_WK_44XX_VIRT		(L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_WK_44XX_SIZE		SZ_1M
 
 #define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
-#define L4_PER_44XX_VIRT	0xd8000000
+						/* 0x48000000 --> 0xfa000000 */
+#define L4_PER_44XX_VIRT	(L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_PER_44XX_SIZE	SZ_4M
 
+#define L4_ABE_44XX_PHYS	L4_ABE_44XX_BASE
+						/* 0x49000000 --> 0xfb000000 */
+#define L4_ABE_44XX_VIRT	(L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_ABE_44XX_SIZE	SZ_1M
+
 #define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
-#define L4_EMU_44XX_VIRT	0xe4000000
-#define L4_EMU_44XX_SIZE	SZ_64M
+						/* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_44XX_VIRT	(L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_44XX_SIZE	SZ_8M
 
 #define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
-#define OMAP44XX_GPMC_VIRT	0xe0000000
+						/* 0x50000000 --> 0xf9000000 */
+#define OMAP44XX_GPMC_VIRT	(OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
 #define OMAP44XX_GPMC_SIZE	SZ_1M
 
 
+#define OMAP44XX_EMIF1_PHYS	OMAP44XX_EMIF1_BASE
+						/* 0x4c000000 --> 0xfd100000 */
+#define OMAP44XX_EMIF1_VIRT	(OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_EMIF1_SIZE	SZ_1M
+
+#define OMAP44XX_EMIF2_PHYS	OMAP44XX_EMIF2_BASE
+						/* 0x4d000000 --> 0xfd200000 */
+#define OMAP44XX_EMIF2_VIRT	(OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_EMIF2_SIZE	SZ_1M
+
+#define OMAP44XX_DMM_PHYS	OMAP44XX_DMM_BASE
+						/* 0x4e000000 --> 0xfd300000 */
+#define OMAP44XX_DMM_VIRT	(OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_DMM_SIZE	SZ_1M
 /*
  * ----------------------------------------------------------------------------
  * Omap specific register access
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 46d41ac83dbf..0752af9d099e 100644
--- a/arch/arm/plat-omap/include/mach/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -107,7 +107,7 @@ struct iommu_platform_data {
 #if defined(CONFIG_ARCH_OMAP1)
 #error "iommu for this processor not implemented yet"
 #else
-#include <mach/iommu2.h>
+#include <plat/iommu2.h>
 #endif
 
 /*
diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h
index 10ad05f410e9..10ad05f410e9 100644
--- a/arch/arm/plat-omap/include/mach/iommu2.h
+++ b/arch/arm/plat-omap/include/plat/iommu2.h
diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
index bdc7ce5d7a4a..bdc7ce5d7a4a 100644
--- a/arch/arm/plat-omap/include/mach/iovmm.h
+++ b/arch/arm/plat-omap/include/plat/iovmm.h
diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/plat/irda.h
index 40f60339d1c6..40f60339d1c6 100644
--- a/arch/arm/plat-omap/include/mach/irda.h
+++ b/arch/arm/plat-omap/include/plat/irda.h
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 28a165058b61..ce5dd2d1dc21 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -86,49 +86,26 @@
 #define INT_1610_SSR_FIFO_0	29
 
 /*
- * OMAP-730 specific IRQ numbers for interrupt handler 1
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
  */
-#define INT_730_IH2_FIQ		0
-#define INT_730_IH2_IRQ		1
-#define INT_730_USB_NON_ISO	2
-#define INT_730_USB_ISO		3
-#define INT_730_ICR		4
-#define INT_730_EAC		5
-#define INT_730_GPIO_BANK1	6
-#define INT_730_GPIO_BANK2	7
-#define INT_730_GPIO_BANK3	8
-#define INT_730_McBSP2TX	10
-#define INT_730_McBSP2RX	11
-#define INT_730_McBSP2RX_OVF	12
-#define INT_730_LCD_LINE	14
-#define INT_730_GSM_PROTECT	15
-#define INT_730_TIMER3		16
-#define INT_730_GPIO_BANK5	17
-#define INT_730_GPIO_BANK6	18
-#define INT_730_SPGIO_WR	29
-
-/*
- * OMAP-850 specific IRQ numbers for interrupt handler 1
- */
-#define INT_850_IH2_FIQ		0
-#define INT_850_IH2_IRQ		1
-#define INT_850_USB_NON_ISO	2
-#define INT_850_USB_ISO		3
-#define INT_850_ICR		4
-#define INT_850_EAC		5
-#define INT_850_GPIO_BANK1	6
-#define INT_850_GPIO_BANK2	7
-#define INT_850_GPIO_BANK3	8
-#define INT_850_McBSP2TX	10
-#define INT_850_McBSP2RX	11
-#define INT_850_McBSP2RX_OVF	12
-#define INT_850_LCD_LINE	14
-#define INT_850_GSM_PROTECT	15
-#define INT_850_TIMER3		16
-#define INT_850_GPIO_BANK5	17
-#define INT_850_GPIO_BANK6	18
-#define INT_850_SPGIO_WR	29
-
+#define INT_7XX_IH2_FIQ		0
+#define INT_7XX_IH2_IRQ		1
+#define INT_7XX_USB_NON_ISO	2
+#define INT_7XX_USB_ISO		3
+#define INT_7XX_ICR		4
+#define INT_7XX_EAC		5
+#define INT_7XX_GPIO_BANK1	6
+#define INT_7XX_GPIO_BANK2	7
+#define INT_7XX_GPIO_BANK3	8
+#define INT_7XX_McBSP2TX	10
+#define INT_7XX_McBSP2RX	11
+#define INT_7XX_McBSP2RX_OVF	12
+#define INT_7XX_LCD_LINE	14
+#define INT_7XX_GSM_PROTECT	15
+#define INT_7XX_TIMER3		16
+#define INT_7XX_GPIO_BANK5	17
+#define INT_7XX_GPIO_BANK6	18
+#define INT_7XX_SPGIO_WR	29
 
 /*
  * IRQ numbers for interrupt handler 2
@@ -206,120 +183,62 @@
 #define INT_1610_SHA1MD5	(91 + IH2_BASE)
 
 /*
- * OMAP-730 specific IRQ numbers for interrupt handler 2
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
  */
-#define INT_730_HW_ERRORS	(0 + IH2_BASE)
-#define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_730_CFCD		(2 + IH2_BASE)
-#define INT_730_CFIREQ		(3 + IH2_BASE)
-#define INT_730_I2C		(4 + IH2_BASE)
-#define INT_730_PCC		(5 + IH2_BASE)
-#define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_730_SPI_100K_1	(7 + IH2_BASE)
-#define INT_730_SYREN_SPI	(8 + IH2_BASE)
-#define INT_730_VLYNQ		(9 + IH2_BASE)
-#define INT_730_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_730_McBSP1TX	(11 + IH2_BASE)
-#define INT_730_McBSP1RX	(12 + IH2_BASE)
-#define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_730_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_730_MCSI		(16 + IH2_BASE)
-#define INT_730_uWireTX		(17 + IH2_BASE)
-#define INT_730_uWireRX		(18 + IH2_BASE)
-#define INT_730_SMC_CD		(19 + IH2_BASE)
-#define INT_730_SMC_IREQ	(20 + IH2_BASE)
-#define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_730_TIMER32K	(22 + IH2_BASE)
-#define INT_730_MMC_SDIO	(23 + IH2_BASE)
-#define INT_730_UPLD		(24 + IH2_BASE)
-#define INT_730_USB_HHC_1	(27 + IH2_BASE)
-#define INT_730_USB_HHC_2	(28 + IH2_BASE)
-#define INT_730_USB_GENI	(29 + IH2_BASE)
-#define INT_730_USB_OTG		(30 + IH2_BASE)
-#define INT_730_CAMERA_IF	(31 + IH2_BASE)
-#define INT_730_RNG		(32 + IH2_BASE)
-#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_730_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_730_SHA1_MD5	(36 + IH2_BASE)
-#define INT_730_SPI_100K_2	(37 + IH2_BASE)
-#define INT_730_RNG_IDLE	(38 + IH2_BASE)
-#define INT_730_MPUIO		(39 + IH2_BASE)
-#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_730_DMA_CH6		(53 + IH2_BASE)
-#define INT_730_DMA_CH7		(54 + IH2_BASE)
-#define INT_730_DMA_CH8		(55 + IH2_BASE)
-#define INT_730_DMA_CH9		(56 + IH2_BASE)
-#define INT_730_DMA_CH10	(57 + IH2_BASE)
-#define INT_730_DMA_CH11	(58 + IH2_BASE)
-#define INT_730_DMA_CH12	(59 + IH2_BASE)
-#define INT_730_DMA_CH13	(60 + IH2_BASE)
-#define INT_730_DMA_CH14	(61 + IH2_BASE)
-#define INT_730_DMA_CH15	(62 + IH2_BASE)
-#define INT_730_NAND		(63 + IH2_BASE)
-
-/*
- * OMAP-850 specific IRQ numbers for interrupt handler 2
- */
-#define INT_850_HW_ERRORS	(0 + IH2_BASE)
-#define INT_850_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_850_CFCD		(2 + IH2_BASE)
-#define INT_850_CFIREQ		(3 + IH2_BASE)
-#define INT_850_I2C		(4 + IH2_BASE)
-#define INT_850_PCC		(5 + IH2_BASE)
-#define INT_850_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_850_SPI_100K_1	(7 + IH2_BASE)
-#define INT_850_SYREN_SPI	(8 + IH2_BASE)
-#define INT_850_VLYNQ		(9 + IH2_BASE)
-#define INT_850_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_850_McBSP1TX	(11 + IH2_BASE)
-#define INT_850_McBSP1RX	(12 + IH2_BASE)
-#define INT_850_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_850_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_850_MCSI		(16 + IH2_BASE)
-#define INT_850_uWireTX		(17 + IH2_BASE)
-#define INT_850_uWireRX		(18 + IH2_BASE)
-#define INT_850_SMC_CD		(19 + IH2_BASE)
-#define INT_850_SMC_IREQ	(20 + IH2_BASE)
-#define INT_850_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_850_TIMER32K	(22 + IH2_BASE)
-#define INT_850_MMC_SDIO	(23 + IH2_BASE)
-#define INT_850_UPLD		(24 + IH2_BASE)
-#define INT_850_USB_HHC_1	(27 + IH2_BASE)
-#define INT_850_USB_HHC_2	(28 + IH2_BASE)
-#define INT_850_USB_GENI	(29 + IH2_BASE)
-#define INT_850_USB_OTG		(30 + IH2_BASE)
-#define INT_850_CAMERA_IF	(31 + IH2_BASE)
-#define INT_850_RNG		(32 + IH2_BASE)
-#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_850_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_850_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_850_SHA1_MD5	(36 + IH2_BASE)
-#define INT_850_SPI_100K_2	(37 + IH2_BASE)
-#define INT_850_RNG_IDLE	(38 + IH2_BASE)
-#define INT_850_MPUIO		(39 + IH2_BASE)
-#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_850_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_850_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_850_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_850_DMA_CH6		(53 + IH2_BASE)
-#define INT_850_DMA_CH7		(54 + IH2_BASE)
-#define INT_850_DMA_CH8		(55 + IH2_BASE)
-#define INT_850_DMA_CH9		(56 + IH2_BASE)
-#define INT_850_DMA_CH10	(57 + IH2_BASE)
-#define INT_850_DMA_CH11	(58 + IH2_BASE)
-#define INT_850_DMA_CH12	(59 + IH2_BASE)
-#define INT_850_DMA_CH13	(60 + IH2_BASE)
-#define INT_850_DMA_CH14	(61 + IH2_BASE)
-#define INT_850_DMA_CH15	(62 + IH2_BASE)
-#define INT_850_NAND		(63 + IH2_BASE)
+#define INT_7XX_HW_ERRORS	(0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_7XX_CFCD		(2 + IH2_BASE)
+#define INT_7XX_CFIREQ		(3 + IH2_BASE)
+#define INT_7XX_I2C		(4 + IH2_BASE)
+#define INT_7XX_PCC		(5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1	(7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI	(8 + IH2_BASE)
+#define INT_7XX_VLYNQ		(9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_7XX_McBSP1TX	(11 + IH2_BASE)
+#define INT_7XX_McBSP1RX	(12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_7XX_MCSI		(16 + IH2_BASE)
+#define INT_7XX_uWireTX		(17 + IH2_BASE)
+#define INT_7XX_uWireRX		(18 + IH2_BASE)
+#define INT_7XX_SMC_CD		(19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ	(20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_7XX_TIMER32K	(22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO	(23 + IH2_BASE)
+#define INT_7XX_UPLD		(24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1	(27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2	(28 + IH2_BASE)
+#define INT_7XX_USB_GENI	(29 + IH2_BASE)
+#define INT_7XX_USB_OTG		(30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF	(31 + IH2_BASE)
+#define INT_7XX_RNG		(32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5	(36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2	(37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE	(38 + IH2_BASE)
+#define INT_7XX_MPUIO		(39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_7XX_DMA_CH6		(53 + IH2_BASE)
+#define INT_7XX_DMA_CH7		(54 + IH2_BASE)
+#define INT_7XX_DMA_CH8		(55 + IH2_BASE)
+#define INT_7XX_DMA_CH9		(56 + IH2_BASE)
+#define INT_7XX_DMA_CH10	(57 + IH2_BASE)
+#define INT_7XX_DMA_CH11	(58 + IH2_BASE)
+#define INT_7XX_DMA_CH12	(59 + IH2_BASE)
+#define INT_7XX_DMA_CH13	(60 + IH2_BASE)
+#define INT_7XX_DMA_CH14	(61 + IH2_BASE)
+#define INT_7XX_DMA_CH15	(62 + IH2_BASE)
+#define INT_7XX_NAND		(63 + IH2_BASE)
 
 #define INT_24XX_SYS_NIRQ	7
 #define INT_24XX_SDMA_IRQ0	12
@@ -558,9 +477,14 @@
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 
+#define INTCPS_NR_MIR_REGS	3
+#define INTCPS_NR_IRQS		96
+
 #ifndef __ASSEMBLY__
 extern void omap_init_irq(void);
 extern int omap_irq_pending(void);
+void omap_intc_save_context(void);
+void omap_intc_restore_context(void);
 #endif
 
 #include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h
index 3ae52ccc793c..3ae52ccc793c 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/plat/keypad.h
diff --git a/arch/arm/plat-omap/include/mach/lcd_mipid.h b/arch/arm/plat-omap/include/plat/lcd_mipid.h
index 8e52c6572281..8e52c6572281 100644
--- a/arch/arm/plat-omap/include/mach/lcd_mipid.h
+++ b/arch/arm/plat-omap/include/plat/lcd_mipid.h
diff --git a/arch/arm/plat-omap/include/mach/led.h b/arch/arm/plat-omap/include/plat/led.h
index 25e451e7e2fd..25e451e7e2fd 100644
--- a/arch/arm/plat-omap/include/mach/led.h
+++ b/arch/arm/plat-omap/include/plat/led.h
diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h
index b7a6991814ec..729166b76a7c 100644
--- a/arch/arm/plat-omap/include/mach/mailbox.h
+++ b/arch/arm/plat-omap/include/plat/mailbox.h
@@ -6,9 +6,9 @@
 #include <linux/wait.h>
 #include <linux/workqueue.h>
 #include <linux/blkdev.h>
+#include <linux/interrupt.h>
 
 typedef u32 mbox_msg_t;
-typedef void (mbox_receiver_t)(mbox_msg_t msg);
 struct omap_mbox;
 
 typedef int __bitwise omap_mbox_irq_t;
@@ -29,8 +29,10 @@ struct omap_mbox_ops {
 	int		(*fifo_empty)(struct omap_mbox *mbox);
 	int		(*fifo_full)(struct omap_mbox *mbox);
 	/* irq */
-	void		(*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
-	void		(*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+	void		(*enable_irq)(struct omap_mbox *mbox,
+						omap_mbox_irq_t irq);
+	void		(*disable_irq)(struct omap_mbox *mbox,
+						omap_mbox_irq_t irq);
 	void		(*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
 	int		(*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
 	/* ctx */
@@ -42,6 +44,7 @@ struct omap_mbox_queue {
 	spinlock_t		lock;
 	struct request_queue	*queue;
 	struct work_struct	work;
+	struct tasklet_struct	tasklet;
 	int	(*callback)(void *);
 	struct omap_mbox	*mbox;
 };
@@ -64,7 +67,7 @@ struct omap_mbox {
 	void			(*err_notify)(void);
 };
 
-int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *);
+int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
 void omap_mbox_init_seq(struct omap_mbox *);
 
 struct omap_mbox *omap_mbox_get(const char *);
@@ -93,4 +96,16 @@ static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
 	mbox->ops->restore_ctx(mbox);
 }
 
+static inline void omap_mbox_enable_irq(struct omap_mbox *mbox,
+					omap_mbox_irq_t irq)
+{
+	mbox->ops->enable_irq(mbox, irq);
+}
+
+static inline void omap_mbox_disable_irq(struct omap_mbox *mbox,
+					 omap_mbox_irq_t irq)
+{
+	mbox->ops->disable_irq(mbox, irq);
+}
+
 #endif /* MAILBOX_H */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index e0d6eca222cc..4f22e5bb7ff7 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -28,10 +28,10 @@
 #include <linux/spinlock.h>
 
 #include <mach/hardware.h>
-#include <mach/clock.h>
+#include <plat/clock.h>
 
-#define OMAP730_MCBSP1_BASE	0xfffb1000
-#define OMAP730_MCBSP2_BASE	0xfffb1800
+#define OMAP7XX_MCBSP1_BASE	0xfffb1000
+#define OMAP7XX_MCBSP2_BASE	0xfffb1800
 
 #define OMAP1510_MCBSP1_BASE	0xe1011800
 #define OMAP1510_MCBSP2_BASE	0xfffb1000
@@ -58,7 +58,7 @@
 #define OMAP44XX_MCBSP3_BASE	0x49026000
 #define OMAP44XX_MCBSP4_BASE	0x48074000
 
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
 #define OMAP_MCBSP_REG_DRR1	0x02
diff --git a/arch/arm/plat-omap/include/mach/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
index 1254e4945b6f..1254e4945b6f 100644
--- a/arch/arm/plat-omap/include/mach/mcspi.h
+++ b/arch/arm/plat-omap/include/plat/mcspi.h
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/plat/memory.h
index 9ad41dc484c1..3325f7b49eaa 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/plat/memory.h
@@ -68,6 +68,13 @@
 		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
 	   __dma; })
 
+#define __arch_dma_to_page(dev, addr)	\
+	({ dma_addr_t __dma = addr;				\
+	   if (is_lbus_device(dev))				\
+		__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;	\
+	   phys_to_page(__dma);					\
+	})
+
 #define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
 						lbus_to_virt(addr) : \
 						__phys_to_virt(addr)); })
diff --git a/arch/arm/plat-omap/include/mach/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h
index 3122bf68c7ce..3122bf68c7ce 100644
--- a/arch/arm/plat-omap/include/mach/menelaus.h
+++ b/arch/arm/plat-omap/include/plat/menelaus.h
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 7229b9593301..29937137bf3e 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -15,7 +15,7 @@
 #include <linux/device.h>
 #include <linux/mmc/host.h>
 
-#include <mach/board.h>
+#include <plat/board.h>
 
 #define OMAP15XX_NR_MMC		1
 #define OMAP16XX_NR_MMC		2
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index 0f49d2d563d9..8f069cc80350 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -51,23 +51,13 @@
 					.pu_pd_reg = PU_PD_SEL_##reg, \
 					.pu_pd_val = status,
 
-#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
-					.mux_reg = OMAP730_IO_CONF_##reg, \
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
 					.mask_offset = mode_offset, \
 					.mask = mode,
 
-#define PULL_REG_730(reg, bit, status)	.pull_name = "OMAP730_IO_CONF_"#reg, \
-					.pull_reg = OMAP730_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \
-					.mux_reg = OMAP850_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_850(reg, bit, status)	.pull_name = "OMAP850_IO_CONF_"#reg, \
-					.pull_reg = OMAP850_IO_CONF_##reg, \
+#define PULL_REG_7XX(reg, bit, status)	.pull_name = "OMAP7XX_IO_CONF_"#reg, \
+					.pull_reg = OMAP7XX_IO_CONF_##reg, \
 					.pull_bit = bit, \
 					.pull_val = status,
 
@@ -84,21 +74,12 @@
 #define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
 					.pu_pd_val = status,
 
-#define MUX_REG_730(reg, mode_offset, mode) \
-					.mux_reg = OMAP730_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_730(reg, bit, status)	.pull_reg = OMAP730_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define MUX_REG_850(reg, mode_offset, mode) \
-					.mux_reg = OMAP850_IO_CONF_##reg, \
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
 					.mask_offset = mode_offset, \
 					.mask = mode,
 
-#define PULL_REG_850(reg, bit, status)	.pull_reg = OMAP850_IO_CONF_##reg, \
+#define PULL_REG_7XX(reg, bit, status)	.pull_reg = OMAP7XX_IO_CONF_##reg, \
 					.pull_bit = bit, \
 					.pull_val = status,
 
@@ -118,32 +99,21 @@
 
 /*
  * OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
  *   not the FUNC_MUX_CTRL_x regs from hardware.h
  * - for pull-up/down, only has one enable bit which is is in the same register
  *   as mux config
  */
-#define MUX_CFG_730(desc, mux_reg, mode_offset, mode,	\
-		   pull_bit, pull_status, debug_status)\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG_730(mux_reg, mode_offset, mode)		\
-	PULL_REG_730(mux_reg, pull_bit, pull_status)	\
-	PU_PD_REG(NA, 0)		\
-},
-
-#define MUX_CFG_850(desc, mux_reg, mode_offset, mode,	\
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\
 		   pull_bit, pull_status, debug_status)\
 {							\
 	.name =	 desc,					\
 	.debug = debug_status,				\
-	MUX_REG_850(mux_reg, mode_offset, mode)		\
-	PULL_REG_850(mux_reg, pull_bit, pull_status)	\
+	MUX_REG_7XX(mux_reg, mode_offset, mode)		\
+	PULL_REG_7XX(mux_reg, pull_bit, pull_status)	\
 	PU_PD_REG(NA, 0)		\
 },
 
-
 #define MUX_CFG_24XX(desc, reg_offset, mode,			\
 				pull_en, pull_mode, dbg)	\
 {								\
@@ -160,58 +130,11 @@
 #define OMAP2_PULL_UP		(1 << 4)
 #define OMAP2_ALTELECTRICALSEL	(1 << 5)
 
-/* 34xx specific mux bit defines */
-#define OMAP3_INPUT_EN		(1 << 8)
-#define OMAP3_OFF_EN		(1 << 9)
-#define OMAP3_OFFOUT_EN		(1 << 10)
-#define OMAP3_OFFOUT_VAL	(1 << 11)
-#define OMAP3_OFF_PULL_EN	(1 << 12)
-#define OMAP3_OFF_PULL_UP	(1 << 13)
-#define OMAP3_WAKEUP_EN		(1 << 14)
-
-/* 34xx mux mode options for each pin. See TRM for options */
-#define	OMAP34XX_MUX_MODE0	0
-#define	OMAP34XX_MUX_MODE1	1
-#define	OMAP34XX_MUX_MODE2	2
-#define	OMAP34XX_MUX_MODE3	3
-#define	OMAP34XX_MUX_MODE4	4
-#define	OMAP34XX_MUX_MODE5	5
-#define	OMAP34XX_MUX_MODE6	6
-#define	OMAP34XX_MUX_MODE7	7
-
-/* 34xx active pin states */
-#define OMAP34XX_PIN_OUTPUT		0
-#define OMAP34XX_PIN_INPUT		OMAP3_INPUT_EN
-#define OMAP34XX_PIN_INPUT_PULLUP	(OMAP2_PULL_ENA | OMAP3_INPUT_EN \
-						| OMAP2_PULL_UP)
-#define OMAP34XX_PIN_INPUT_PULLDOWN	(OMAP2_PULL_ENA | OMAP3_INPUT_EN)
-
-/* 34xx off mode states */
-#define OMAP34XX_PIN_OFF_NONE           0
-#define OMAP34XX_PIN_OFF_OUTPUT_HIGH	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
-						| OMAP3_OFFOUT_VAL)
-#define OMAP34XX_PIN_OFF_OUTPUT_LOW	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
-#define OMAP34XX_PIN_OFF_INPUT_PULLUP	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
-						| OMAP3_OFF_PULL_UP)
-#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
-#define OMAP34XX_PIN_OFF_WAKEUPENABLE	OMAP3_WAKEUP_EN
-
-#define MUX_CFG_34XX(desc, reg_offset, mux_value) {		\
-	.name		= desc,					\
-	.debug		= 0,					\
-	.mux_reg	= reg_offset,				\
-	.mux_val	= mux_value				\
-},
-
 struct pin_config {
 	char 			*name;
 	const unsigned int 	mux_reg;
 	unsigned char		debug;
 
-#if	defined(CONFIG_ARCH_OMAP34XX)
-	u16			mux_val; /* Wake-up, off mode, pull, mux mode */
-#endif
-
 #if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
 	const unsigned char mask_offset;
 	const unsigned char mask;
@@ -232,45 +155,36 @@ struct pin_config {
 
 };
 
-enum omap730_index {
+enum omap7xx_index {
 	/* OMAP 730 keyboard */
-	E2_730_KBR0,
-	J7_730_KBR1,
-	E1_730_KBR2,
-	F3_730_KBR3,
-	D2_730_KBR4,
-	C2_730_KBC0,
-	D3_730_KBC1,
-	E4_730_KBC2,
-	F4_730_KBC3,
-	E3_730_KBC4,
-
-	/* USB */
-	AA17_730_USB_DM,
-	W16_730_USB_PU_EN,
-	W17_730_USB_VBUSI,
-};
-
-enum omap850_index {
-	/* OMAP 850 keyboard */
-	E2_850_KBR0,
-	J7_850_KBR1,
-	E1_850_KBR2,
-	F3_850_KBR3,
-	D2_850_KBR4,
-	C2_850_KBC0,
-	D3_850_KBC1,
-	E4_850_KBC2,
-	F4_850_KBC3,
-	E3_850_KBC4,
+	E2_7XX_KBR0,
+	J7_7XX_KBR1,
+	E1_7XX_KBR2,
+	F3_7XX_KBR3,
+	D2_7XX_KBR4,
+	C2_7XX_KBC0,
+	D3_7XX_KBC1,
+	E4_7XX_KBC2,
+	F4_7XX_KBC3,
+	E3_7XX_KBC4,
 
 	/* USB */
-	AA17_850_USB_DM,
-	W16_850_USB_PU_EN,
-	W17_850_USB_VBUSI,
+	AA17_7XX_USB_DM,
+	W16_7XX_USB_PU_EN,
+	W17_7XX_USB_VBUSI,
+	W18_7XX_USB_DMCK_OUT,
+	W19_7XX_USB_DCRST,
+
+	/* MMC */
+	MMC_7XX_CMD,
+	MMC_7XX_CLK,
+	MMC_7XX_DAT0,
+
+	/* I2C */
+	I2C_7XX_SCL,
+	I2C_7XX_SDA,
 };
 
-
 enum omap1xxx_index {
 	/* UART1 (BT_UART_GATING)*/
 	UART1_TX = 0,
@@ -726,172 +640,6 @@ enum omap24xx_index {
 
 };
 
-enum omap34xx_index {
-	/* 34xx I2C */
-	K21_34XX_I2C1_SCL,
-	J21_34XX_I2C1_SDA,
-	AF15_34XX_I2C2_SCL,
-	AE15_34XX_I2C2_SDA,
-	AF14_34XX_I2C3_SCL,
-	AG14_34XX_I2C3_SDA,
-	AD26_34XX_I2C4_SCL,
-	AE26_34XX_I2C4_SDA,
-
-	/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
-	Y8_3430_USB1HS_PHY_CLK,
-	Y9_3430_USB1HS_PHY_STP,
-	AA14_3430_USB1HS_PHY_DIR,
-	AA11_3430_USB1HS_PHY_NXT,
-	W13_3430_USB1HS_PHY_DATA0,
-	W12_3430_USB1HS_PHY_DATA1,
-	W11_3430_USB1HS_PHY_DATA2,
-	Y11_3430_USB1HS_PHY_DATA3,
-	W9_3430_USB1HS_PHY_DATA4,
-	Y12_3430_USB1HS_PHY_DATA5,
-	W8_3430_USB1HS_PHY_DATA6,
-	Y13_3430_USB1HS_PHY_DATA7,
-
-	/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
-	AA8_3430_USB2HS_PHY_CLK,
-	AA10_3430_USB2HS_PHY_STP,
-	AA9_3430_USB2HS_PHY_DIR,
-	AB11_3430_USB2HS_PHY_NXT,
-	AB10_3430_USB2HS_PHY_DATA0,
-	AB9_3430_USB2HS_PHY_DATA1,
-	W3_3430_USB2HS_PHY_DATA2,
-	T4_3430_USB2HS_PHY_DATA3,
-	T3_3430_USB2HS_PHY_DATA4,
-	R3_3430_USB2HS_PHY_DATA5,
-	R4_3430_USB2HS_PHY_DATA6,
-	T2_3430_USB2HS_PHY_DATA7,
-
-
-	/* TLL - HSUSB: 12-pin TLL Port 1*/
-	Y8_3430_USB1HS_TLL_CLK,
-	Y9_3430_USB1HS_TLL_STP,
-	AA14_3430_USB1HS_TLL_DIR,
-	AA11_3430_USB1HS_TLL_NXT,
-	W13_3430_USB1HS_TLL_DATA0,
-	W12_3430_USB1HS_TLL_DATA1,
-	W11_3430_USB1HS_TLL_DATA2,
-	Y11_3430_USB1HS_TLL_DATA3,
-	W9_3430_USB1HS_TLL_DATA4,
-	Y12_3430_USB1HS_TLL_DATA5,
-	W8_3430_USB1HS_TLL_DATA6,
-	Y13_3430_USB1HS_TLL_DATA7,
-
-	/* TLL - HSUSB: 12-pin TLL Port 2*/
-	AA8_3430_USB2HS_TLL_CLK,
-	AA10_3430_USB2HS_TLL_STP,
-	AA9_3430_USB2HS_TLL_DIR,
-	AB11_3430_USB2HS_TLL_NXT,
-	AB10_3430_USB2HS_TLL_DATA0,
-	AB9_3430_USB2HS_TLL_DATA1,
-	W3_3430_USB2HS_TLL_DATA2,
-	T4_3430_USB2HS_TLL_DATA3,
-	T3_3430_USB2HS_TLL_DATA4,
-	R3_3430_USB2HS_TLL_DATA5,
-	R4_3430_USB2HS_TLL_DATA6,
-	T2_3430_USB2HS_TLL_DATA7,
-
-	/* TLL - HSUSB: 12-pin TLL Port 3*/
-	AA6_3430_USB3HS_TLL_CLK,
-	AB3_3430_USB3HS_TLL_STP,
-	AA3_3430_USB3HS_TLL_DIR,
-	Y3_3430_USB3HS_TLL_NXT,
-	AA5_3430_USB3HS_TLL_DATA0,
-	Y4_3430_USB3HS_TLL_DATA1,
-	Y5_3430_USB3HS_TLL_DATA2,
-	W5_3430_USB3HS_TLL_DATA3,
-	AB12_3430_USB3HS_TLL_DATA4,
-	AB13_3430_USB3HS_TLL_DATA5,
-	AA13_3430_USB3HS_TLL_DATA6,
-	AA12_3430_USB3HS_TLL_DATA7,
-
-	/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
-	AF10_3430_USB1FS_PHY_MM1_RXDP,
-	AG9_3430_USB1FS_PHY_MM1_RXDM,
-	W13_3430_USB1FS_PHY_MM1_RXRCV,
-	W12_3430_USB1FS_PHY_MM1_TXSE0,
-	W11_3430_USB1FS_PHY_MM1_TXDAT,
-	Y11_3430_USB1FS_PHY_MM1_TXEN_N,
-
-	/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
-	AF7_3430_USB2FS_PHY_MM2_RXDP,
-	AH7_3430_USB2FS_PHY_MM2_RXDM,
-	AB10_3430_USB2FS_PHY_MM2_RXRCV,
-	AB9_3430_USB2FS_PHY_MM2_TXSE0,
-	W3_3430_USB2FS_PHY_MM2_TXDAT,
-	T4_3430_USB2FS_PHY_MM2_TXEN_N,
-
-	/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
-	AH3_3430_USB3FS_PHY_MM3_RXDP,
-	AE3_3430_USB3FS_PHY_MM3_RXDM,
-	AD1_3430_USB3FS_PHY_MM3_RXRCV,
-	AE1_3430_USB3FS_PHY_MM3_TXSE0,
-	AD2_3430_USB3FS_PHY_MM3_TXDAT,
-	AC1_3430_USB3FS_PHY_MM3_TXEN_N,
-
-	/* 34xx GPIO
-	 *  - normally these are bidirectional, no internal pullup/pulldown
-	 *  - "_UP" suffix (GPIO3_UP) if internal pullup is configured
-	 *  - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
-	 *  - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
-	 */
-	AF26_34XX_GPIO0,
-	AF22_34XX_GPIO9,
-	AG9_34XX_GPIO23,
-	AH8_34XX_GPIO29,
-	U8_34XX_GPIO54_OUT,
-	U8_34XX_GPIO54_DOWN,
-	L8_34XX_GPIO63,
-	G25_34XX_GPIO86_OUT,
-	AG4_34XX_GPIO134_OUT,
-	AF4_34XX_GPIO135_OUT,
-	AE4_34XX_GPIO136_OUT,
-	AF6_34XX_GPIO140_UP,
-	AE6_34XX_GPIO141,
-	AF5_34XX_GPIO142,
-	AE5_34XX_GPIO143,
-	H19_34XX_GPIO164_OUT,
-	J25_34XX_GPIO170,
-
-	/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
-	H16_34XX_SDRC_CKE0,
-	H17_34XX_SDRC_CKE1,
-
-	/* MMC1 */
-	N28_3430_MMC1_CLK,
-	M27_3430_MMC1_CMD,
-	N27_3430_MMC1_DAT0,
-	N26_3430_MMC1_DAT1,
-	N25_3430_MMC1_DAT2,
-	P28_3430_MMC1_DAT3,
-	P27_3430_MMC1_DAT4,
-	P26_3430_MMC1_DAT5,
-	R27_3430_MMC1_DAT6,
-	R25_3430_MMC1_DAT7,
-
-	/* MMC2 */
-	AE2_3430_MMC2_CLK,
-	AG5_3430_MMC2_CMD,
-	AH5_3430_MMC2_DAT0,
-	AH4_3430_MMC2_DAT1,
-	AG4_3430_MMC2_DAT2,
-	AF4_3430_MMC2_DAT3,
-
-	/* MMC3 */
-	AF10_3430_MMC3_CLK,
-	AC3_3430_MMC3_CMD,
-	AE11_3430_MMC3_DAT0,
-	AH9_3430_MMC3_DAT1,
-	AF13_3430_MMC3_DAT2,
-	AF13_3430_MMC3_DAT3,
-
-	/* SYS_NIRQ T2 INT1 */
-	AF26_34XX_SYS_NIRQ,
-};
-
 struct omap_mux_cfg {
 	struct pin_config	*pins;
 	unsigned long		size;
@@ -901,14 +649,14 @@ struct omap_mux_cfg {
 #ifdef	CONFIG_OMAP_MUX
 /* setup pin muxing in Linux */
 extern int omap1_mux_init(void);
-extern int omap2_mux_init(void);
 extern int omap_mux_register(struct omap_mux_cfg *);
 extern int omap_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
 static inline int omap1_mux_init(void) { return 0; }
-static inline int omap2_mux_init(void) { return 0; }
 static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
 #endif
 
+extern int omap2_mux_init(void);
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index 631a7bed1eef..631a7bed1eef 100644
--- a/arch/arm/plat-omap/include/mach/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
diff --git a/arch/arm/plat-omap/include/mach/omap-alsa.h b/arch/arm/plat-omap/include/plat/omap-alsa.h
index bdf30a0f87f2..b53055b390d0 100644
--- a/arch/arm/plat-omap/include/mach/omap-alsa.h
+++ b/arch/arm/plat-omap/include/plat/omap-alsa.h
@@ -40,10 +40,10 @@
 #ifndef __OMAP_ALSA_H
 #define __OMAP_ALSA_H
 
-#include <mach/dma.h>
+#include <plat/dma.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
-#include <mach/mcbsp.h>
+#include <plat/mcbsp.h>
 #include <linux/platform_device.h>
 
 #define DMA_BUF_SIZE	(1024 * 8)
diff --git a/arch/arm/plat-omap/include/mach/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
index 3ee41d711492..3ee41d711492 100644
--- a/arch/arm/plat-omap/include/mach/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/plat/omap1510.h
index d24004668138..d24004668138 100644
--- a/arch/arm/plat-omap/include/mach/omap1510.h
+++ b/arch/arm/plat-omap/include/plat/omap1510.h
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h
index 0e69b504c25f..7560b4d583a3 100644
--- a/arch/arm/plat-omap/include/mach/omap16xx.h
+++ b/arch/arm/plat-omap/include/plat/omap16xx.h
@@ -124,7 +124,7 @@
 #define TIPB_SWITCH_BASE		 (0xfffbc800)
 #define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
 
-/* UART3 Registers Maping through MPU bus */
+/* UART3 Registers Mapping through MPU bus */
 #define UART3_RHR               (OMAP_UART3_BASE + 0)
 #define UART3_THR               (OMAP_UART3_BASE + 0)
 #define UART3_DLL               (OMAP_UART3_BASE + 0)
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h
index 696edfc145a6..696edfc145a6 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/plat/omap24xx.h
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h
index f8d186a73712..077f05979f86 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/plat/omap34xx.h
@@ -72,16 +72,15 @@
 #define OMAP3430_ISP_CSI2A_END		(OMAP3430_ISP_CSI2A_BASE   + 0x16F)
 #define OMAP3430_ISP_CSI2PHY_END	(OMAP3430_ISP_CSI2PHY_BASE + 0x007)
 
-#define OMAP34XX_IVA_INTC_BASE	0x40000000
 #define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
-#define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
 #define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
+#define OMAP34XX_UHH_CONFIG_BASE	(L4_34XX_BASE + 0x64000)
+#define OMAP34XX_OHCI_BASE	(L4_34XX_BASE + 0x64400)
+#define OMAP34XX_EHCI_BASE	(L4_34XX_BASE + 0x64800)
+#define OMAP34XX_SR1_BASE	0x480C9000
+#define OMAP34XX_SR2_BASE	0x480CB000
 
 #define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
-#define OMAP34XX_DSP_BASE	0x58000000
-#define OMAP34XX_DSP_MEM_BASE	(OMAP34XX_DSP_BASE + 0x0)
-#define OMAP34XX_DSP_IPI_BASE	(OMAP34XX_DSP_BASE + 0x1000000)
-#define OMAP34XX_DSP_MMU_BASE	(OMAP34XX_DSP_BASE + 0x2000000)
 #endif /* __ASM_ARCH_OMAP34XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
index b3ba5ac7b4a4..ef870de43c29 100644
--- a/arch/arm/plat-omap/include/mach/omap44xx.h
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -22,9 +22,14 @@
 #define L4_PER_44XX_BASE		0x48000000
 #define L4_EMU_44XX_BASE		0x54000000
 #define L3_44XX_BASE			0x44000000
+#define OMAP44XX_EMIF1_BASE		0x4c000000
+#define OMAP44XX_EMIF2_BASE		0x4d000000
+#define OMAP44XX_DMM_BASE		0x4e000000
 #define OMAP4430_32KSYNCT_BASE		0x4a304000
-#define OMAP4430_CM_BASE		0x4a004000
-#define OMAP4430_PRM_BASE		0x48306000
+#define OMAP4430_CM1_BASE		0x4a004000
+#define OMAP4430_CM_BASE		OMAP4430_CM1_BASE
+#define OMAP4430_CM2_BASE		0x4a008000
+#define OMAP4430_PRM_BASE		0x4a306000
 #define OMAP44XX_GPMC_BASE		0x50000000
 #define OMAP443X_SCM_BASE		0x4a002000
 #define OMAP443X_CTRL_BASE		OMAP443X_SCM_BASE
@@ -33,14 +38,11 @@
 #define IRQ_SIR_IRQ			0x0040
 #define OMAP44XX_GIC_DIST_BASE		0x48241000
 #define OMAP44XX_GIC_CPU_BASE		0x48240100
-#define OMAP44XX_VA_GIC_CPU_BASE	OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
 #define OMAP44XX_SCU_BASE		0x48240000
-#define OMAP44XX_VA_SCU_BASE		OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
 #define OMAP44XX_LOCAL_TWD_BASE		0x48240600
-#define OMAP44XX_VA_LOCAL_TWD_BASE	OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
-#define OMAP44XX_LOCAL_TWD_SIZE		0x00000100
 #define OMAP44XX_WKUPGEN_BASE		0x48281000
-#define OMAP44XX_VA_WKUPGEN_BASE	OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+#define OMAP44XX_MAILBOX_BASE		(L4_44XX_BASE + 0xF4000)
 
 #endif /* __ASM_ARCH_OMAP44XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h
index 14272bc1a6fd..14272bc1a6fd 100644
--- a/arch/arm/plat-omap/include/mach/omap730.h
+++ b/arch/arm/plat-omap/include/plat/omap730.h
diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h
new file mode 100644
index 000000000000..53f52414b0e9
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap7xx.h
@@ -0,0 +1,104 @@
+/* arch/arm/plat-omap/include/mach/omap7xx.h
+ *
+ * Hardware definitions for TI OMAP7XX processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
+ * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP7XX_H
+#define __ASM_ARCH_OMAP7XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP7XX_DSP_BASE	0xE0000000
+#define OMAP7XX_DSP_SIZE	0x50000
+#define OMAP7XX_DSP_START	0xE0000000
+
+#define OMAP7XX_DSPREG_BASE	0xE1000000
+#define OMAP7XX_DSPREG_SIZE	SZ_128K
+#define OMAP7XX_DSPREG_START	0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_CONFIG_BASE	0xfffe1000
+#define OMAP7XX_IO_CONF_0	0xfffe1070
+#define OMAP7XX_IO_CONF_1	0xfffe1074
+#define OMAP7XX_IO_CONF_2	0xfffe1078
+#define OMAP7XX_IO_CONF_3	0xfffe107c
+#define OMAP7XX_IO_CONF_4	0xfffe1080
+#define OMAP7XX_IO_CONF_5	0xfffe1084
+#define OMAP7XX_IO_CONF_6	0xfffe1088
+#define OMAP7XX_IO_CONF_7	0xfffe108c
+#define OMAP7XX_IO_CONF_8	0xfffe1090
+#define OMAP7XX_IO_CONF_9	0xfffe1094
+#define OMAP7XX_IO_CONF_10	0xfffe1098
+#define OMAP7XX_IO_CONF_11	0xfffe109c
+#define OMAP7XX_IO_CONF_12	0xfffe10a0
+#define OMAP7XX_IO_CONF_13	0xfffe10a4
+
+#define OMAP7XX_MODE_1		0xfffe1010
+#define OMAP7XX_MODE_2		0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP7XX_MODE2_OFFSET	0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_FLASH_CFG_0	0xfffecc10
+#define OMAP7XX_FLASH_ACFG_0	0xfffecc50
+#define OMAP7XX_FLASH_CFG_1	0xfffecc14
+#define OMAP7XX_FLASH_ACFG_1	0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_ICR_BASE	0xfffbb800
+#define OMAP7XX_DSP_M_CTL	0xfffbb804
+#define OMAP7XX_DSP_MMU_BASE	0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_PCC_UPLD_CTRL_BASE	(0xfffe0900)
+#define OMAP7XX_PCC_UPLD_CTRL		(OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP7XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h
index c33f67981712..c33f67981712 100644
--- a/arch/arm/plat-omap/include/mach/omap850.h
+++ b/arch/arm/plat-omap/include/plat/omap850.h
diff --git a/arch/arm/plat-omap/include/mach/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index bd0e136db337..dc1fac1d805c 100644
--- a/arch/arm/plat-omap/include/mach/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -34,7 +34,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 
 /* omap_device._state values */
 #define OMAP_DEVICE_STATE_UNKNOWN	0
@@ -50,8 +50,8 @@
  * @pm_lats: ptr to an omap_device_pm_latency table
  * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
  * @pm_lat_level: array index of the last odpl entry executed - -1 if never
- * @dev_wakeup_lat: dev wakeup latency in microseconds
- * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM
+ * @dev_wakeup_lat: dev wakeup latency in nanoseconds
+ * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
  * @_state: one of OMAP_DEVICE_STATE_* (see above)
  * @flags: device flags
  *
@@ -137,5 +137,7 @@ struct omap_device_pm_latency {
 };
 
 
-#endif
+/* Get omap_device pointer from platform_device pointer */
+#define to_omap_device(x) container_of((x), struct omap_device, pdev)
 
+#endif
diff --git a/arch/arm/plat-omap/include/mach/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 1f79c20e2929..007935a921ea 100644
--- a/arch/arm/plat-omap/include/mach/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -35,7 +35,7 @@
 #include <linux/kernel.h>
 #include <linux/ioport.h>
 
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 struct omap_device;
 
@@ -50,6 +50,8 @@ struct omap_device;
 #define SYSC_ENAWAKEUP_MASK		(1 << SYSC_ENAWAKEUP_SHIFT)
 #define SYSC_SOFTRESET_SHIFT		1
 #define SYSC_SOFTRESET_MASK		(1 << SYSC_SOFTRESET_SHIFT)
+#define SYSC_AUTOIDLE_SHIFT		0
+#define SYSC_AUTOIDLE_MASK		(1 << SYSC_AUTOIDLE_SHIFT)
 
 /* OCP SYSSTATUS bit shifts/masks */
 #define SYSS_RESETDONE_SHIFT		0
@@ -62,7 +64,21 @@ struct omap_device;
 
 
 /**
- * struct omap_hwmod_dma_info - MPU address space handled by the hwmod
+ * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
+ * @name: name of the IRQ channel (module local name)
+ * @irq_ch: IRQ channel ID
+ *
+ * @name should be something short, e.g., "tx" or "rx".  It is for use
+ * by platform_get_resource_byname().  It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_irq_info {
+	const char	*name;
+	u16		irq;
+};
+
+/**
+ * struct omap_hwmod_dma_info - DMA channels used by the hwmod
  * @name: name of the DMA channel (module local name)
  * @dma_ch: DMA channel ID
  *
@@ -294,13 +310,17 @@ struct omap_hwmod_omap4_prcm {
  *     SDRAM controller, etc.
  * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
  *     controller, etc.
+ * HWMOD_NO_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
+ *     when module is enabled, rather than the default, which is to
+ *     enable autoidle
  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
 #define HWMOD_INIT_NO_RESET			(1 << 2)
 #define HWMOD_INIT_NO_IDLE			(1 << 3)
-#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 4)
+#define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
+#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
 
 /*
  * omap_hwmod._int_flags definitions
@@ -373,7 +393,7 @@ struct omap_hwmod_omap4_prcm {
 struct omap_hwmod {
 	const char			*name;
 	struct omap_device		*od;
-	u8				*mpu_irqs;
+	struct omap_hwmod_irq_info	*mpu_irqs;
 	struct omap_hwmod_dma_info	*sdma_chs;
 	union {
 		struct omap_hwmod_omap2_prcm omap2;
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h
index 72f433d7d827..72f433d7d827 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/plat/onenand.h
diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/plat/param.h
index 1eb4dc326979..1eb4dc326979 100644
--- a/arch/arm/plat-omap/include/mach/param.h
+++ b/arch/arm/plat-omap/include/plat/param.h
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h
index fa6461423bd0..0b960051eaed 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/plat/powerdomain.h
@@ -19,7 +19,7 @@
 
 #include <asm/atomic.h>
 
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 
 /* Powerdomain basic power states */
@@ -28,6 +28,8 @@
 #define PWRDM_POWER_INACTIVE	0x2
 #define PWRDM_POWER_ON		0x3
 
+#define PWRDM_MAX_PWRSTS	4
+
 /* Powerdomain allowable state bitfields */
 #define PWRSTS_OFF_ON		((1 << PWRDM_POWER_OFF) | \
 				 (1 << PWRDM_POWER_ON))
@@ -40,7 +42,10 @@
 
 /* Powerdomain flags */
 #define PWRDM_HAS_HDWR_SAR	(1 << 0) /* hardware save-and-restore support */
-
+#define PWRDM_HAS_MPU_QUIRK	(1 << 1) /* MPU pwr domain has MEM bank 0 bits
+					  * in MEM bank 1 position. This is
+					  * true for OMAP3430
+					  */
 
 /*
  * Number of memory banks that are power-controllable.	On OMAP3430, the
@@ -85,15 +90,15 @@ struct powerdomain {
 	/* Used to represent the OMAP chip types containing this pwrdm */
 	const struct omap_chip_id omap_chip;
 
-	/* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */
-	const u8 dep_bit;
-
 	/* Powerdomains that can be told to wake this powerdomain up */
 	struct pwrdm_dep *wkdep_srcs;
 
 	/* Powerdomains that can be told to keep this pwrdm from inactivity */
 	struct pwrdm_dep *sleepdep_srcs;
 
+	/* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */
+	const u8 dep_bit;
+
 	/* Possible powerdomain power states */
 	const u8 pwrsts;
 
@@ -118,11 +123,11 @@ struct powerdomain {
 	struct list_head node;
 
 	int state;
-	unsigned state_counter[4];
+	unsigned state_counter[PWRDM_MAX_PWRSTS];
 
 #ifdef CONFIG_PM_DEBUG
 	s64 timer;
-	s64 state_timer[4];
+	s64 state_timer[PWRDM_MAX_PWRSTS];
 #endif
 };
 
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
index cda2a70397b4..e63e94e18975 100644
--- a/arch/arm/plat-omap/include/mach/prcm.h
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -27,9 +27,13 @@ u32 omap_prcm_get_reset_sources(void);
 void omap_prcm_arch_reset(char mode);
 int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
 
-#endif
+#define START_PADCONF_SAVE 0x2
+#define PADCONF_SAVE_DONE  0x1
 
+void omap3_prcm_save_context(void);
+void omap3_prcm_restore_context(void);
 
+#endif
 
 
 
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
index 1c09c78a48f2..7b76f50564ba 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -44,6 +44,12 @@
 #define SDRC_RFR_CTRL_1		0x0D4
 #define SDRC_MANUAL_1		0x0D8
 
+#define SDRC_POWER_AUTOCOUNT_SHIFT	8
+#define SDRC_POWER_AUTOCOUNT_MASK	(0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
+#define SDRC_POWER_CLKCTRL_SHIFT	4
+#define SDRC_POWER_CLKCTRL_MASK		(0x3 << SDRC_POWER_CLKCTRL_SHIFT)
+#define SDRC_SELF_REFRESH_ON_AUTOCOUNT	(0x2 << SDRC_POWER_CLKCTRL_SHIFT)
+
 /*
  * These values represent the number of memory clock cycles between
  * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
@@ -80,15 +86,18 @@
  */
 
 #define OMAP242X_SMS_REGADDR(reg)					\
-			(void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
 #define OMAP243X_SMS_REGADDR(reg)					\
-			(void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
 #define OMAP343X_SMS_REGADDR(reg)					\
-			(void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
 
 /* SMS register offsets - read/write with sms_{read,write}_reg() */
 
-#define SMS_SYSCONFIG		0x010
+#define SMS_SYSCONFIG			0x010
+#define SMS_ROT_CONTROL(context)	(0x180 + 0x10 * context)
+#define SMS_ROT_SIZE(context)		(0x184 + 0x10 * context)
+#define SMS_ROT_PHYSICAL_BA(context)	(0x188 + 0x10 * context)
 /* REVISIT: fill in other SMS registers here */
 
 
@@ -120,6 +129,12 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 int omap2_sdrc_get_params(unsigned long r,
 			  struct omap_sdrc_params **sdrc_cs0,
 			  struct omap_sdrc_params **sdrc_cs1);
+void omap2_sms_save_context(void);
+void omap2_sms_restore_context(void);
+
+void omap2_sms_write_rot_control(u32 val, unsigned ctx);
+void omap2_sms_write_rot_size(u32 val, unsigned ctx);
+void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
 
 #ifdef CONFIG_ARCH_OMAP2
 
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index e249186d26e2..f5a4a92393ef 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -20,26 +20,22 @@
 #define OMAP_UART1_BASE		0xfffb0000
 #define OMAP_UART2_BASE		0xfffb0800
 #define OMAP_UART3_BASE		0xfffb9800
-#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP2)
 /* OMAP2 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x4806e000
-#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP3)
 /* OMAP3 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x49020000
-#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP4)
 /* OMAP4 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x48020000
 #define OMAP_UART4_BASE		0x4806e000
-#define OMAP_MAX_NR_PORTS	4
 #endif
 
 #define OMAP1510_BASE_BAUD	(12000000/16)
@@ -57,6 +53,7 @@
 #ifndef __ASSEMBLER__
 extern void __init omap_serial_early_init(void);
 extern void omap_serial_init(void);
+extern void omap_serial_init_port(int port);
 extern int omap_uart_can_sleep(void);
 extern void omap_uart_check_wakeup(void);
 extern void omap_uart_prepare_suspend(void);
diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/plat/smp.h
index dcaa8fde7063..8983d54c4fd2 100644
--- a/arch/arm/plat-omap/include/mach/smp.h
+++ b/arch/arm/plat-omap/include/plat/smp.h
@@ -28,6 +28,8 @@
 
 /* Needed for secondary core boot */
 extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
 
 /*
  * We use Soft IRQ1 as the IPI
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 8974e3fc2691..16a1b458d53c 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -27,6 +27,7 @@ extern u32 omap3_configure_core_dpll(
 			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
 			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
 			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern void omap3_sram_restore_context(void);
 
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -68,4 +69,10 @@ extern u32 omap3_sram_configure_core_dpll(
 			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
 extern unsigned long omap3_sram_configure_core_dpll_sz;
 
+#ifdef CONFIG_PM
+extern void omap_push_sram_idle(void);
+#else
+static inline void omap_push_sram_idle(void) {}
+#endif /* CONFIG_PM */
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/plat/system.h
index ed8ec7477261..c58a4ef42a45 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/plat/system.h
@@ -9,7 +9,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 
-#include <mach/prcm.h>
+#include <plat/prcm.h>
 
 #ifndef CONFIG_MACH_VOICEBLUE
 #define voiceblue_reset()		do {} while (0)
diff --git a/arch/arm/plat-omap/include/mach/tc.h b/arch/arm/plat-omap/include/plat/tc.h
index d2fcd789bb9a..d2fcd789bb9a 100644
--- a/arch/arm/plat-omap/include/mach/tc.h
+++ b/arch/arm/plat-omap/include/plat/tc.h
diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/plat/timer-gp.h
index c88d346b59d9..c88d346b59d9 100644
--- a/arch/arm/plat-omap/include/mach/timer-gp.h
+++ b/arch/arm/plat-omap/include/plat/timer-gp.h
diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/plat/timex.h
index 6d35767bc48f..6d35767bc48f 100644
--- a/arch/arm/plat-omap/include/mach/timex.h
+++ b/arch/arm/plat-omap/include/plat/timex.h
diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 0814c5f210c3..13c305d62127 100644
--- a/arch/arm/plat-omap/include/mach/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -19,12 +19,13 @@
 
 #include <linux/types.h>
 #include <linux/serial_reg.h>
-#include <mach/serial.h>
+#include <plat/serial.h>
 
 unsigned int system_rev;
 
 #define UART_OMAP_MDR1		0x08	/* mode definition register */
 #define OMAP_ID_730		0x355F
+#define OMAP_ID_850		0x362C
 #define ID_MASK			0x7fff
 #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
 #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
@@ -43,8 +44,12 @@ static void putc(int c)
 	uart = (volatile u8 *)(OMAP_UART3_BASE);
 #elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
 	uart = (volatile u8 *)(OMAP_UART2_BASE);
-#else
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART1)
 	uart = (volatile u8 *)(OMAP_UART1_BASE);
+#elif defined(CONFIG_OMAP_LL_DEBUG_NONE)
+	return;
+#else
+	return;
 #endif
 
 #ifdef CONFIG_ARCH_OMAP1
@@ -53,7 +58,7 @@ static void putc(int c)
 		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
 		unsigned int omap_id = omap_get_id();
 
-		if (omap_id == OMAP_ID_730)
+		if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850)
 			shift = 0;
 
 		if (check_port(uart, shift))
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index f337e1761e2c..33a500eb2f93 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -3,7 +3,22 @@
 #ifndef	__ASM_ARCH_OMAP_USB_H
 #define	__ASM_ARCH_OMAP_USB_H
 
-#include <mach/board.h>
+#include <plat/board.h>
+
+#define OMAP3_HS_USB_PORTS	3
+enum ehci_hcd_omap_mode {
+	EHCI_HCD_OMAP_MODE_UNKNOWN,
+	EHCI_HCD_OMAP_MODE_PHY,
+	EHCI_HCD_OMAP_MODE_TLL,
+};
+
+struct ehci_hcd_omap_platform_data {
+	enum ehci_hcd_omap_mode		port_mode[OMAP3_HS_USB_PORTS];
+	unsigned			phy_reset:1;
+
+	/* have to be valid if phy_reset is true and portx is in phy mode */
+	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
+};
 
 /*-------------------------------------------------------------------------*/
 
@@ -29,6 +44,8 @@
 
 extern void usb_musb_init(void);
 
+extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
+
 #endif
 
 void omap_usb_init(struct omap_usb_config *pdata);
diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h
new file mode 100644
index 000000000000..edd4987758a6
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/vram.h
@@ -0,0 +1,62 @@
+/*
+ * VRAM manager for OMAP
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAP_VRAM_H__
+#define __OMAP_VRAM_H__
+
+#include <linux/types.h>
+
+#define OMAP_VRAM_MEMTYPE_SDRAM		0
+#define OMAP_VRAM_MEMTYPE_SRAM		1
+#define OMAP_VRAM_MEMTYPE_MAX		1
+
+extern int omap_vram_add_region(unsigned long paddr, size_t size);
+extern int omap_vram_free(unsigned long paddr, size_t size);
+extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr);
+extern int omap_vram_reserve(unsigned long paddr, size_t size);
+extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
+		unsigned long *largest_free_block);
+
+#ifdef CONFIG_OMAP2_VRAM
+extern void omap_vram_set_sdram_vram(u32 size, u32 start);
+extern void omap_vram_set_sram_vram(u32 size, u32 start);
+
+extern void omap_vram_reserve_sdram(void);
+extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
+					    unsigned long sram_vstart,
+					    unsigned long sram_size,
+					    unsigned long pstart_avail,
+					    unsigned long size_avail);
+#else
+static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
+static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
+
+static inline void omap_vram_reserve_sdram(void) { }
+static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
+					    unsigned long sram_vstart,
+					    unsigned long sram_size,
+					    unsigned long pstart_avail,
+					    unsigned long size_avail)
+{
+	return 0;
+}
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h
new file mode 100644
index 000000000000..d8a03ced3b10
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/vrfb.h
@@ -0,0 +1,50 @@
+/*
+ * VRFB Rotation Engine
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAP_VRFB_H__
+#define __OMAP_VRFB_H__
+
+#define OMAP_VRFB_LINE_LEN 2048
+
+struct vrfb {
+	u8 context;
+	void __iomem *vaddr[4];
+	unsigned long paddr[4];
+	u16 xres;
+	u16 yres;
+	u16 xoffset;
+	u16 yoffset;
+	u8 bytespp;
+	bool yuv_mode;
+};
+
+extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
+		u8 bytespp);
+extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp);
+extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp);
+extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+		u16 width, u16 height,
+		unsigned bytespp, bool yuv_mode);
+extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot);
+extern void omap_vrfb_restore_context(void);
+
+#endif /* __VRFB_H */
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index b6defa23e77e..11f5d7961c73 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -13,12 +13,12 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 
-#include <mach/omap730.h>
-#include <mach/omap1510.h>
-#include <mach/omap16xx.h>
-#include <mach/omap24xx.h>
-#include <mach/omap34xx.h>
-#include <mach/omap44xx.h>
+#include <plat/omap7xx.h>
+#include <plat/omap1510.h>
+#include <plat/omap16xx.h>
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
+#include <plat/omap44xx.h>
 
 #define BETWEEN(p,st,sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p,pst,vst)	((void __iomem *)((p) - (pst) + (vst)))
@@ -33,13 +33,13 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 		if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
 			return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
 	}
-	if (cpu_is_omap730()) {
-		if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
-			return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START);
+	if (cpu_is_omap7xx()) {
+		if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE))
+			return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START);
 
-		if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE))
-			return XLATE(p, OMAP730_DSPREG_BASE,
-					OMAP730_DSPREG_START);
+		if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE))
+			return XLATE(p, OMAP7XX_DSPREG_BASE,
+					OMAP7XX_DSPREG_START);
 	}
 	if (cpu_is_omap15xx()) {
 		if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
@@ -114,6 +114,14 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 			return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
 		if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
 			return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+		if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE))
+			return XLATE(p, OMAP44XX_EMIF1_PHYS,		\
+							OMAP44XX_EMIF1_VIRT);
+		if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE))
+			return XLATE(p, OMAP44XX_EMIF2_PHYS,		\
+							OMAP44XX_EMIF2_VIRT);
+		if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE))
+			return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT);
 		if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
 			return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
 		if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
@@ -142,7 +150,7 @@ u8 omap_readb(u32 pa)
 	if (cpu_class_is_omap1())
 		return __raw_readb(OMAP1_IO_ADDRESS(pa));
 	else
-		return __raw_readb(OMAP2_IO_ADDRESS(pa));
+		return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_readb);
 
@@ -151,7 +159,7 @@ u16 omap_readw(u32 pa)
 	if (cpu_class_is_omap1())
 		return __raw_readw(OMAP1_IO_ADDRESS(pa));
 	else
-		return __raw_readw(OMAP2_IO_ADDRESS(pa));
+		return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_readw);
 
@@ -160,7 +168,7 @@ u32 omap_readl(u32 pa)
 	if (cpu_class_is_omap1())
 		return __raw_readl(OMAP1_IO_ADDRESS(pa));
 	else
-		return __raw_readl(OMAP2_IO_ADDRESS(pa));
+		return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_readl);
 
@@ -169,7 +177,7 @@ void omap_writeb(u8 v, u32 pa)
 	if (cpu_class_is_omap1())
 		__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
 	else
-		__raw_writeb(v, OMAP2_IO_ADDRESS(pa));
+		__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_writeb);
 
@@ -178,7 +186,7 @@ void omap_writew(u16 v, u32 pa)
 	if (cpu_class_is_omap1())
 		__raw_writew(v, OMAP1_IO_ADDRESS(pa));
 	else
-		__raw_writew(v, OMAP2_IO_ADDRESS(pa));
+		__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_writew);
 
@@ -187,6 +195,6 @@ void omap_writel(u32 v, u32 pa)
 	if (cpu_class_is_omap1())
 		__raw_writel(v, OMAP1_IO_ADDRESS(pa));
 	else
-		__raw_writel(v, OMAP2_IO_ADDRESS(pa));
+		__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c
index c799b3b0d709..afd1c27cff7c 100644
--- a/arch/arm/plat-omap/iommu-debug.c
+++ b/arch/arm/plat-omap/iommu-debug.c
@@ -17,8 +17,8 @@
 #include <linux/platform_device.h>
 #include <linux/debugfs.h>
 
-#include <mach/iommu.h>
-#include <mach/iovmm.h>
+#include <plat/iommu.h>
+#include <plat/iovmm.h>
 
 #include "iopgtable.h"
 
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 94584f167a82..c0ff1e39d893 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -20,7 +20,7 @@
 
 #include <asm/cacheflush.h>
 
-#include <mach/iommu.h>
+#include <plat/iommu.h>
 
 #include "iopgtable.h"
 
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index dc3fac3dd0ea..936aef1971cd 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -18,8 +18,8 @@
 #include <asm/cacheflush.h>
 #include <asm/mach/map.h>
 
-#include <mach/iommu.h>
-#include <mach/iovmm.h>
+#include <plat/iommu.h>
+#include <plat/iovmm.h>
 
 #include "iopgtable.h"
 
@@ -392,7 +392,6 @@ static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
 	}
 
 	va_end = _va + PAGE_SIZE * i;
-	flush_cache_vmap((unsigned long)_va, (unsigned long)va_end);
 }
 
 static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
@@ -427,8 +426,6 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
 		len -= bytes;
 	}
 	BUG_ON(len);
-
-	clean_dcache_area(va, len);
 }
 
 static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
@@ -449,7 +446,7 @@ static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
 	struct scatterlist *sg;
 	u32 da = new->da_start;
 
-	if (!obj || !new || !sgt)
+	if (!obj || !sgt)
 		return -EINVAL;
 
 	BUG_ON(!sgtable_ok(sgt));
@@ -617,7 +614,7 @@ u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
 		 u32 flags)
 {
 	size_t bytes;
-	void *va;
+	void *va = NULL;
 
 	if (!obj || !obj->dev || !sgt)
 		return -EINVAL;
@@ -627,9 +624,11 @@ u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
 		return -EINVAL;
 	bytes = PAGE_ALIGN(bytes);
 
-	va = vmap_sg(sgt);
-	if (IS_ERR(va))
-		return PTR_ERR(va);
+	if (flags & IOVMF_MMIO) {
+		va = vmap_sg(sgt);
+		if (IS_ERR(va))
+			return PTR_ERR(va);
+	}
 
 	flags &= IOVMF_HW_MASK;
 	flags |= IOVMF_DISCONT;
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 40424edae939..8e90633e4cb9 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -26,55 +26,12 @@
 #include <linux/device.h>
 #include <linux/delay.h>
 
-#include <mach/mailbox.h>
-
-static int enable_seq_bit;
-module_param(enable_seq_bit, bool, 0);
-MODULE_PARM_DESC(enable_seq_bit, "Enable sequence bit checking.");
+#include <plat/mailbox.h>
 
 static struct omap_mbox *mboxes;
 static DEFINE_RWLOCK(mboxes_lock);
 
-/*
- * Mailbox sequence bit API
- */
-
-/* seq_rcv should be initialized with any value other than
- * 0 and 1 << 31, to allow either value for the first
- * message.  */
-static inline void mbox_seq_init(struct omap_mbox *mbox)
-{
-	if (!enable_seq_bit)
-		return;
-
-	/* any value other than 0 and 1 << 31 */
-	mbox->seq_rcv = 0xffffffff;
-}
-
-static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
-{
-	if (!enable_seq_bit)
-		return;
-
-	/* add seq_snd to msg */
-	*msg = (*msg & 0x7fffffff) | mbox->seq_snd;
-	/* flip seq_snd */
-	mbox->seq_snd ^= 1 << 31;
-}
-
-static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	mbox_msg_t seq;
-
-	if (!enable_seq_bit)
-		return 0;
-
-	seq = msg & (1 << 31);
-	if (seq == mbox->seq_rcv)
-		return -1;
-	mbox->seq_rcv = seq;
-	return 0;
-}
+static int mbox_configured;
 
 /* Mailbox FIFO handle functions */
 static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
@@ -95,14 +52,6 @@ static inline int mbox_fifo_full(struct omap_mbox *mbox)
 }
 
 /* Mailbox IRQ handle functions */
-static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	mbox->ops->enable_irq(mbox, irq);
-}
-static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	mbox->ops->disable_irq(mbox, irq);
-}
 static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
 {
 	if (mbox->ops->ack_irq)
@@ -113,17 +62,10 @@ static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
 	return mbox->ops->is_irq(mbox, irq);
 }
 
-/* Mailbox Sequence Bit function */
-void omap_mbox_init_seq(struct omap_mbox *mbox)
-{
-	mbox_seq_init(mbox);
-}
-EXPORT_SYMBOL(omap_mbox_init_seq);
-
 /*
  * message sender
  */
-static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg)
+static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
 {
 	int ret = 0, i = 1000;
 
@@ -134,89 +76,49 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg)
 			return -1;
 		udelay(1);
 	}
-
-	if (arg && mbox->txq->callback) {
-		ret = mbox->txq->callback(arg);
-		if (ret)
-			goto out;
-	}
-
-	mbox_seq_toggle(mbox, &msg);
 	mbox_fifo_write(mbox, msg);
- out:
 	return ret;
 }
 
-struct omap_msg_tx_data {
-	mbox_msg_t	msg;
-	void		*arg;
-};
 
-static void omap_msg_tx_end_io(struct request *rq, int error)
+int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
 {
-	kfree(rq->special);
-	__blk_put_request(rq->q, rq);
-}
 
-int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void* arg)
-{
-	struct omap_msg_tx_data *tx_data;
 	struct request *rq;
 	struct request_queue *q = mbox->txq->queue;
 
-	tx_data = kmalloc(sizeof(*tx_data), GFP_ATOMIC);
-	if (unlikely(!tx_data))
-		return -ENOMEM;
-
 	rq = blk_get_request(q, WRITE, GFP_ATOMIC);
-	if (unlikely(!rq)) {
-		kfree(tx_data);
+	if (unlikely(!rq))
 		return -ENOMEM;
-	}
 
-	tx_data->msg = msg;
-	tx_data->arg = arg;
-	rq->end_io = omap_msg_tx_end_io;
-	blk_insert_request(q, rq, 0, tx_data);
+	blk_insert_request(q, rq, 0, (void *) msg);
+	tasklet_schedule(&mbox->txq->tasklet);
 
-	schedule_work(&mbox->txq->work);
 	return 0;
 }
 EXPORT_SYMBOL(omap_mbox_msg_send);
 
-static void mbox_tx_work(struct work_struct *work)
+static void mbox_tx_tasklet(unsigned long tx_data)
 {
 	int ret;
 	struct request *rq;
-	struct omap_mbox_queue *mq = container_of(work,
-				struct omap_mbox_queue, work);
-	struct omap_mbox *mbox = mq->queue->queuedata;
+	struct omap_mbox *mbox = (struct omap_mbox *)tx_data;
 	struct request_queue *q = mbox->txq->queue;
 
 	while (1) {
-		struct omap_msg_tx_data *tx_data;
 
-		spin_lock(q->queue_lock);
 		rq = blk_fetch_request(q);
-		spin_unlock(q->queue_lock);
 
 		if (!rq)
 			break;
 
-		tx_data = rq->special;
-
-		ret = __mbox_msg_send(mbox, tx_data->msg, tx_data->arg);
+		ret = __mbox_msg_send(mbox, (mbox_msg_t)rq->special);
 		if (ret) {
-			enable_mbox_irq(mbox, IRQ_TX);
-			spin_lock(q->queue_lock);
+			omap_mbox_enable_irq(mbox, IRQ_TX);
 			blk_requeue_request(q, rq);
-			spin_unlock(q->queue_lock);
 			return;
 		}
-
-		spin_lock(q->queue_lock);
-		__blk_end_request_all(rq, 0);
-		spin_unlock(q->queue_lock);
+		blk_end_request_all(rq, 0);
 	}
 }
 
@@ -233,11 +135,6 @@ static void mbox_rx_work(struct work_struct *work)
 	mbox_msg_t msg;
 	unsigned long flags;
 
-	if (mbox->rxq->callback == NULL) {
-		sysfs_notify(&mbox->dev->kobj, NULL, "mbox");
-		return;
-	}
-
 	while (1) {
 		spin_lock_irqsave(q->queue_lock, flags);
 		rq = blk_fetch_request(q);
@@ -254,19 +151,19 @@ static void mbox_rx_work(struct work_struct *work)
 /*
  * Mailbox interrupt handler
  */
-static void mbox_txq_fn(struct request_queue * q)
+static void mbox_txq_fn(struct request_queue *q)
 {
 }
 
-static void mbox_rxq_fn(struct request_queue * q)
+static void mbox_rxq_fn(struct request_queue *q)
 {
 }
 
 static void __mbox_tx_interrupt(struct omap_mbox *mbox)
 {
-	disable_mbox_irq(mbox, IRQ_TX);
+	omap_mbox_disable_irq(mbox, IRQ_TX);
 	ack_mbox_irq(mbox, IRQ_TX);
-	schedule_work(&mbox->txq->work);
+	tasklet_schedule(&mbox->txq->tasklet);
 }
 
 static void __mbox_rx_interrupt(struct omap_mbox *mbox)
@@ -275,8 +172,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 	mbox_msg_t msg;
 	struct request_queue *q = mbox->rxq->queue;
 
-	disable_mbox_irq(mbox, IRQ_RX);
-
 	while (!mbox_fifo_empty(mbox)) {
 		rq = blk_get_request(q, WRITE, GFP_ATOMIC);
 		if (unlikely(!rq))
@@ -284,11 +179,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 
 		msg = mbox_fifo_read(mbox);
 
-		if (unlikely(mbox_seq_test(mbox, msg))) {
-			pr_info("mbox: Illegal seq bit!(%08x)\n", msg);
-			if (mbox->err_notify)
-				mbox->err_notify();
-		}
 
 		blk_insert_request(q, rq, 0, (void *)msg);
 		if (mbox->ops->type == OMAP_MBOX_TYPE1)
@@ -297,7 +187,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 
 	/* no more messages in the fifo. clear IRQ source. */
 	ack_mbox_irq(mbox, IRQ_RX);
-	enable_mbox_irq(mbox, IRQ_RX);
 nomem:
 	schedule_work(&mbox->rxq->work);
 }
@@ -315,76 +204,10 @@ static irqreturn_t mbox_interrupt(int irq, void *p)
 	return IRQ_HANDLED;
 }
 
-/*
- * sysfs files
- */
-static ssize_t
-omap_mbox_write(struct device *dev, struct device_attribute *attr,
-		const char * buf, size_t count)
-{
-	int ret;
-	mbox_msg_t *p = (mbox_msg_t *)buf;
-	struct omap_mbox *mbox = dev_get_drvdata(dev);
-
-	for (; count >= sizeof(mbox_msg_t); count -= sizeof(mbox_msg_t)) {
-		ret = omap_mbox_msg_send(mbox, be32_to_cpu(*p), NULL);
-		if (ret)
-			return -EAGAIN;
-		p++;
-	}
-
-	return (size_t)((char *)p - buf);
-}
-
-static ssize_t
-omap_mbox_read(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	unsigned long flags;
-	struct request *rq;
-	mbox_msg_t *p = (mbox_msg_t *) buf;
-	struct omap_mbox *mbox = dev_get_drvdata(dev);
-	struct request_queue *q = mbox->rxq->queue;
-
-	while (1) {
-		spin_lock_irqsave(q->queue_lock, flags);
-		rq = blk_fetch_request(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-
-		if (!rq)
-			break;
-
-		*p = (mbox_msg_t)rq->special;
-
-		blk_end_request_all(rq, 0);
-
-		if (unlikely(mbox_seq_test(mbox, *p))) {
-			pr_info("mbox: Illegal seq bit!(%08x) ignored\n", *p);
-			continue;
-		}
-		p++;
-	}
-
-	pr_debug("%02x %02x %02x %02x\n", buf[0], buf[1], buf[2], buf[3]);
-
-	return (size_t) ((char *)p - buf);
-}
-
-static DEVICE_ATTR(mbox, S_IRUGO | S_IWUSR, omap_mbox_read, omap_mbox_write);
-
-static ssize_t mbox_show(struct class *class, char *buf)
-{
-	return sprintf(buf, "mbox");
-}
-
-static CLASS_ATTR(mbox, S_IRUGO, mbox_show, NULL);
-
-static struct class omap_mbox_class = {
-	.name = "omap-mailbox",
-};
-
 static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
-					request_fn_proc * proc,
-					void (*work) (struct work_struct *))
+					request_fn_proc *proc,
+					void (*work) (struct work_struct *),
+					void (*tasklet)(unsigned long))
 {
 	struct request_queue *q;
 	struct omap_mbox_queue *mq;
@@ -401,8 +224,11 @@ static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
 	q->queuedata = mbox;
 	mq->queue = q;
 
-	INIT_WORK(&mq->work, work);
+	if (work)
+		INIT_WORK(&mq->work, work);
 
+	if (tasklet)
+		tasklet_init(&mq->tasklet, tasklet, (unsigned long)mbox);
 	return mq;
 error:
 	kfree(mq);
@@ -415,18 +241,25 @@ static void mbox_queue_free(struct omap_mbox_queue *q)
 	kfree(q);
 }
 
-static int omap_mbox_init(struct omap_mbox *mbox)
+static int omap_mbox_startup(struct omap_mbox *mbox)
 {
-	int ret;
+	int ret = 0;
 	struct omap_mbox_queue *mq;
 
 	if (likely(mbox->ops->startup)) {
-		ret = mbox->ops->startup(mbox);
-		if (unlikely(ret))
+		write_lock(&mboxes_lock);
+		if (!mbox_configured)
+			ret = mbox->ops->startup(mbox);
+
+		if (unlikely(ret)) {
+			write_unlock(&mboxes_lock);
 			return ret;
+		}
+		mbox_configured++;
+		write_unlock(&mboxes_lock);
 	}
 
-	ret = request_irq(mbox->irq, mbox_interrupt, IRQF_DISABLED,
+	ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
 				mbox->name, mbox);
 	if (unlikely(ret)) {
 		printk(KERN_ERR
@@ -434,14 +267,14 @@ static int omap_mbox_init(struct omap_mbox *mbox)
 		goto fail_request_irq;
 	}
 
-	mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work);
+	mq = mbox_queue_alloc(mbox, mbox_txq_fn, NULL, mbox_tx_tasklet);
 	if (!mq) {
 		ret = -ENOMEM;
 		goto fail_alloc_txq;
 	}
 	mbox->txq = mq;
 
-	mq = mbox_queue_alloc(mbox, mbox_rxq_fn, mbox_rx_work);
+	mq = mbox_queue_alloc(mbox, mbox_rxq_fn, mbox_rx_work, NULL);
 	if (!mq) {
 		ret = -ENOMEM;
 		goto fail_alloc_rxq;
@@ -468,8 +301,14 @@ static void omap_mbox_fini(struct omap_mbox *mbox)
 
 	free_irq(mbox->irq, mbox);
 
-	if (unlikely(mbox->ops->shutdown))
-		mbox->ops->shutdown(mbox);
+	if (unlikely(mbox->ops->shutdown)) {
+		write_lock(&mboxes_lock);
+		if (mbox_configured > 0)
+			mbox_configured--;
+		if (!mbox_configured)
+			mbox->ops->shutdown(mbox);
+		write_unlock(&mboxes_lock);
+	}
 }
 
 static struct omap_mbox **find_mboxes(const char *name)
@@ -498,7 +337,7 @@ struct omap_mbox *omap_mbox_get(const char *name)
 
 	read_unlock(&mboxes_lock);
 
-	ret = omap_mbox_init(mbox);
+	ret = omap_mbox_startup(mbox);
 	if (ret)
 		return ERR_PTR(-ENODEV);
 
@@ -522,15 +361,6 @@ int omap_mbox_register(struct device *parent, struct omap_mbox *mbox)
 	if (mbox->next)
 		return -EBUSY;
 
-	mbox->dev = device_create(&omap_mbox_class,
-				  parent, 0, mbox, "%s", mbox->name);
-	if (IS_ERR(mbox->dev))
-		return PTR_ERR(mbox->dev);
-
-	ret = device_create_file(mbox->dev, &dev_attr_mbox);
-	if (ret)
-		goto err_sysfs;
-
 	write_lock(&mboxes_lock);
 	tmp = find_mboxes(mbox->name);
 	if (*tmp) {
@@ -544,9 +374,6 @@ int omap_mbox_register(struct device *parent, struct omap_mbox *mbox)
 	return 0;
 
 err_find:
-	device_remove_file(mbox->dev, &dev_attr_mbox);
-err_sysfs:
-	device_unregister(mbox->dev);
 	return ret;
 }
 EXPORT_SYMBOL(omap_mbox_register);
@@ -562,8 +389,6 @@ int omap_mbox_unregister(struct omap_mbox *mbox)
 			*tmp = mbox->next;
 			mbox->next = NULL;
 			write_unlock(&mboxes_lock);
-			device_remove_file(mbox->dev, &dev_attr_mbox);
-			device_unregister(mbox->dev);
 			return 0;
 		}
 		tmp = &(*tmp)->next;
@@ -574,23 +399,16 @@ int omap_mbox_unregister(struct omap_mbox *mbox)
 }
 EXPORT_SYMBOL(omap_mbox_unregister);
 
-static int __init omap_mbox_class_init(void)
+static int __init omap_mbox_init(void)
 {
-	int ret = class_register(&omap_mbox_class);
-	if (!ret)
-		ret = class_create_file(&omap_mbox_class, &class_attr_mbox);
-
-	return ret;
+	return 0;
 }
+module_init(omap_mbox_init);
 
-static void __exit omap_mbox_class_exit(void)
+static void __exit omap_mbox_exit(void)
 {
-	class_remove_file(&omap_mbox_class, &class_attr_mbox);
-	class_unregister(&omap_mbox_class);
 }
-
-subsys_initcall(omap_mbox_class_init);
-module_exit(omap_mbox_class_exit);
+module_exit(omap_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index e664b912d7bb..2cc1cc328bac 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,8 +24,8 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <mach/dma.h>
-#include <mach/mcbsp.h>
+#include <plat/dma.h>
+#include <plat/mcbsp.h>
 
 struct omap_mcbsp **mcbsp_ptr;
 int omap_mcbsp_count;
@@ -298,9 +298,7 @@ int omap_mcbsp_get_dma_op_mode(unsigned int id)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
-	spin_lock_irq(&mcbsp->lock);
 	dma_op_mode = mcbsp->dma_op_mode;
-	spin_unlock_irq(&mcbsp->lock);
 
 	return dma_op_mode;
 }
@@ -318,7 +316,6 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
 
-		spin_lock_irq(&mcbsp->lock);
 		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
 			syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
 					CLOCKACTIVITY(0x02));
@@ -327,7 +324,6 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 		} else {
 			syscon |= SIDLEMODE(0x01);
 		}
-		spin_unlock_irq(&mcbsp->lock);
 
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 	}
@@ -1145,9 +1141,7 @@ static ssize_t dma_op_mode_show(struct device *dev,
 	ssize_t len = 0;
 	const char * const *s;
 
-	spin_lock_irq(&mcbsp->lock);
 	dma_op_mode = mcbsp->dma_op_mode;
-	spin_unlock_irq(&mcbsp->lock);
 
 	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
 		if (dma_op_mode == i)
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 8d329fb20740..06703635ace1 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -28,7 +28,7 @@
 #include <linux/io.h>
 #include <asm/system.h>
 #include <linux/spinlock.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
@@ -54,8 +54,12 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 {
 	struct pin_config *reg;
 
-	if (cpu_is_omap44xx())
-		return 0;
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+				index);
+		WARN_ON(1);
+		return -EINVAL;
+	}
 
 	if (mux_cfg == NULL) {
 		printk(KERN_ERR "Pin mux table not initialized\n");
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index e98f0a2a6c26..186bca82cfab 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -22,9 +22,9 @@
 #include <linux/device.h>
 
 /* Interface documentation is in mach/omap-pm.h */
-#include <mach/omap-pm.h>
+#include <plat/omap-pm.h>
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 struct omap_opp *dsp_opps;
 struct omap_opp *mpu_opps;
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 2c409fc6dd21..1e5648d3e3d8 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -82,8 +82,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <mach/omap_device.h>
-#include <mach/omap_hwmod.h>
+#include <plat/omap_device.h>
+#include <plat/omap_hwmod.h>
 
 /* These parameters are passed to _omap_device_{de,}activate() */
 #define USE_WAKEUP_LAT			0
@@ -103,21 +103,6 @@
 /* Private functions */
 
 /**
- * _read_32ksynct - read the OMAP 32K sync timer
- *
- * Returns the current value of the 32KiHz synchronization counter.
- * XXX this should be generalized to simply read the system clocksource.
- * XXX this should be moved to a separate synctimer32k.c file
- */
-static u32 _read_32ksynct(void)
-{
-	if (!cpu_class_is_omap2())
-		BUG();
-
-	return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010));
-}
-
-/**
  * _omap_device_activate - increase device readiness
  * @od: struct omap_device *
  * @ignore_lat: increase to latency target (0) or full readiness (1)?
@@ -133,13 +118,13 @@ static u32 _read_32ksynct(void)
  */
 static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
 {
-	u32 a, b;
+	struct timespec a, b, c;
 
 	pr_debug("omap_device: %s: activating\n", od->pdev.name);
 
 	while (od->pm_lat_level > 0) {
 		struct omap_device_pm_latency *odpl;
-		int act_lat = 0;
+		unsigned long long act_lat = 0;
 
 		od->pm_lat_level--;
 
@@ -149,20 +134,22 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
 		    (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
 			break;
 
-		a = _read_32ksynct();
+		read_persistent_clock(&a);
 
 		/* XXX check return code */
 		odpl->activate_func(od);
 
-		b = _read_32ksynct();
+		read_persistent_clock(&b);
 
-		act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+		c = timespec_sub(b, a);
+		act_lat = timespec_to_ns(&c);
 
 		pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
-			 "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat);
+			 "%llu nsec\n", od->pdev.name, od->pm_lat_level,
+			 act_lat);
 
 		WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
-		     "activate step %d took longer than expected (%d > %d)\n",
+		     "activate step %d took longer than expected (%llu > %d)\n",
 		     od->pdev.name, od->pdev.id, od->pm_lat_level,
 		     act_lat, odpl->activate_lat);
 
@@ -188,13 +175,13 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
  */
 static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
 {
-	u32 a, b;
+	struct timespec a, b, c;
 
 	pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
 
 	while (od->pm_lat_level < od->pm_lats_cnt) {
 		struct omap_device_pm_latency *odpl;
-		int deact_lat = 0;
+		unsigned long long deact_lat = 0;
 
 		odpl = od->pm_lats + od->pm_lat_level;
 
@@ -203,23 +190,24 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
 		     od->_dev_wakeup_lat_limit))
 			break;
 
-		a = _read_32ksynct();
+		read_persistent_clock(&a);
 
 		/* XXX check return code */
 		odpl->deactivate_func(od);
 
-		b = _read_32ksynct();
+		read_persistent_clock(&b);
 
-		deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+		c = timespec_sub(b, a);
+		deact_lat = timespec_to_ns(&c);
 
 		pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
-			 "%d usec\n", od->pdev.name, od->pm_lat_level,
+			 "%llu nsec\n", od->pdev.name, od->pm_lat_level,
 			 deact_lat);
 
 		WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
-		     "deactivate step %d took longer than expected (%d > %d)\n",
-		     od->pdev.name, od->pdev.id, od->pm_lat_level,
-		     deact_lat, odpl->deactivate_lat);
+		     "deactivate step %d took longer than expected "
+		     "(%llu > %d)\n", od->pdev.name, od->pdev.id,
+		     od->pm_lat_level, deact_lat, odpl->deactivate_lat);
 
 		od->dev_wakeup_lat += odpl->activate_lat;
 
@@ -471,7 +459,7 @@ int omap_device_enable(struct platform_device *pdev)
 	ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
 
 	od->dev_wakeup_lat = 0;
-	od->_dev_wakeup_lat_limit = INT_MAX;
+	od->_dev_wakeup_lat_limit = UINT_MAX;
 	od->_state = OMAP_DEVICE_STATE_ENABLED;
 
 	return ret;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 75d1f26e5b17..d8d5094b37ed 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -25,11 +25,12 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/sram.h>
-#include <mach/board.h>
-#include <mach/cpu.h>
+#include <plat/sram.h>
+#include <plat/board.h>
+#include <plat/cpu.h>
+#include <plat/vram.h>
 
-#include <mach/control.h>
+#include <plat/control.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
@@ -41,14 +42,16 @@
 #define OMAP1_SRAM_VA		VMALLOC_END
 #define OMAP2_SRAM_PA		0x40200000
 #define OMAP2_SRAM_PUB_PA	0x4020f800
-#define OMAP2_SRAM_VA		0xe3000000
+#define OMAP2_SRAM_VA		0xfe400000
 #define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
-#define OMAP3_SRAM_VA           0xe3000000
+#define OMAP3_SRAM_VA           0xfe400000
 #define OMAP3_SRAM_PUB_PA       0x40208000
 #define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_PA		0x40200000		/*0x402f0000*/
-#define OMAP4_SRAM_VA		0xd7000000		/*0xd70f0000*/
+#define OMAP4_SRAM_PA		0x40300000
+#define OMAP4_SRAM_VA		0xfe400000
+#define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
+#define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define SRAM_BOOTLOADER_SZ	0x00
@@ -56,16 +59,16 @@
 #define SRAM_BOOTLOADER_SZ	0x80
 #endif
 
-#define OMAP24XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68005058)
+#define OMAP24XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68005058)
 
-#define OMAP34XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT	OMAP2_IO_ADDRESS(0x480022F0)
+#define OMAP34XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_L3_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_L3_IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT	OMAP2_L4_IO_ADDRESS(0x480022F0)
 
 #define GP_DEVICE		0x300
 
@@ -139,6 +142,10 @@ void __init omap_detect_sram(void)
 				} else {
 					omap_sram_size = 0x8000; /* 32K */
 				}
+			} else if (cpu_is_omap44xx()) {
+				omap_sram_base = OMAP4_SRAM_PUB_VA;
+				omap_sram_start = OMAP4_SRAM_PUB_PA;
+				omap_sram_size = 0xa000; /* 40K */
 			} else {
 				omap_sram_base = OMAP2_SRAM_PUB_VA;
 				omap_sram_start = OMAP2_SRAM_PUB_PA;
@@ -152,7 +159,7 @@ void __init omap_detect_sram(void)
 			} else if (cpu_is_omap44xx()) {
 				omap_sram_base = OMAP4_SRAM_VA;
 				omap_sram_start = OMAP4_SRAM_PA;
-				omap_sram_size = 0x8000; /* 32K */
+				omap_sram_size = 0xe000; /* 56K */
 			} else {
 				omap_sram_base = OMAP2_SRAM_VA;
 				omap_sram_start = OMAP2_SRAM_PA;
@@ -185,6 +192,13 @@ void __init omap_detect_sram(void)
 				       omap_sram_start + SRAM_BOOTLOADER_SZ,
 				       omap_sram_size - SRAM_BOOTLOADER_SZ);
 	omap_sram_size -= reserved;
+
+	reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base,
+			omap_sram_size,
+			omap_sram_start + SRAM_BOOTLOADER_SZ,
+			omap_sram_size - SRAM_BOOTLOADER_SZ);
+	omap_sram_size -= reserved;
+
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
 }
 
@@ -396,22 +410,24 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
 			sdrc_actim_ctrl_b_1, sdrc_mr_1);
 }
 
-/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
-void restore_sram_functions(void)
+#ifdef CONFIG_PM
+void omap3_sram_restore_context(void)
 {
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
 
 	_omap3_sram_configure_core_dpll =
 		omap_sram_push(omap3_sram_configure_core_dpll,
 			       omap3_sram_configure_core_dpll_sz);
+	omap_push_sram_idle();
 }
+#endif /* CONFIG_PM */
 
 int __init omap34xx_sram_init(void)
 {
 	_omap3_sram_configure_core_dpll =
 		omap_sram_push(omap3_sram_configure_core_dpll,
 			       omap3_sram_configure_core_dpll_sz);
-
+	omap_push_sram_idle();
 	return 0;
 }
 #else
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 509f2ed99e21..d3bf17cd36f3 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -33,10 +33,10 @@
 #include <asm/system.h>
 #include <mach/hardware.h>
 
-#include <mach/control.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
+#include <plat/control.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
 
 #ifdef CONFIG_ARCH_OMAP1
 
@@ -137,7 +137,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 	if (is_device) {
 		if (cpu_is_omap24xx())
 			omap_cfg_reg(J20_24XX_USB0_PUEN);
-		else
+		else if (cpu_is_omap7xx()) {
+			omap_cfg_reg(AA17_7XX_USB_DM);
+			omap_cfg_reg(W16_7XX_USB_PU_EN);
+			omap_cfg_reg(W17_7XX_USB_VBUSI);
+			omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
+			omap_cfg_reg(W19_7XX_USB_DCRST);
+		} else
 			omap_cfg_reg(W4_USB_PUEN);
 	}
 
@@ -159,11 +165,14 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 		 *  - OTG support on this port not yet written
 		 */
 
-		l = omap_readl(USB_TRANSCEIVER_CTRL);
-		l &= ~(7 << 4);
-		if (!is_device)
-			l |= (3 << 1);
-		omap_writel(l, USB_TRANSCEIVER_CTRL);
+		/* Don't do this for omap7xx -- it causes USB to not work correctly */
+		if (!cpu_is_omap7xx()) {
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l &= ~(7 << 4);
+			if (!is_device)
+				l |= (3 << 1);
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
 
 		return 3 << 16;
 	}
@@ -603,7 +612,12 @@ omap_otg_init(struct omap_usb_config *config)
 	if (config->otg || config->register_dev) {
 		syscon &= ~DEV_IDLE_EN;
 		udc_device.dev.platform_data = config;
-		/* FIXME patch IRQ numbers for omap730 */
+		/* IRQ numbers for omap7xx */
+		if(cpu_is_omap7xx()) {
+			udc_resources[1].start = INT_7XX_USB_GENI;
+			udc_resources[2].start = INT_7XX_USB_NON_ISO;
+			udc_resources[3].start = INT_7XX_USB_ISO;
+		}
 		status = platform_device_register(&udc_device);
 		if (status)
 			pr_debug("can't register UDC device, %d\n", status);
@@ -614,8 +628,8 @@ omap_otg_init(struct omap_usb_config *config)
 	if (config->otg || config->register_host) {
 		syscon &= ~HST_IDLE_EN;
 		ohci_device.dev.platform_data = config;
-		if (cpu_is_omap730())
-			ohci_resources[1].start = INT_730_USB_HHC_1;
+		if (cpu_is_omap7xx())
+			ohci_resources[1].start = INT_7XX_USB_HHC_1;
 		status = platform_device_register(&ohci_device);
 		if (status)
 			pr_debug("can't register OHCI device, %d\n", status);
@@ -626,8 +640,8 @@ omap_otg_init(struct omap_usb_config *config)
 	if (config->otg) {
 		syscon &= ~OTG_IDLE_EN;
 		otg_device.dev.platform_data = config;
-		if (cpu_is_omap730())
-			otg_resources[1].start = INT_730_USB_OTG;
+		if (cpu_is_omap7xx())
+			otg_resources[1].start = INT_7XX_USB_OTG;
 		status = platform_device_register(&otg_device);
 		if (status)
 			pr_debug("can't register OTG device, %d\n", status);
@@ -731,7 +745,7 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
 
 void __init omap_usb_init(struct omap_usb_config *pdata)
 {
-	if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx())
+	if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx())
 		omap_otg_init(pdata);
 	else if (cpu_is_omap15xx())
 		omap_1510_usb_init(pdata);
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
index 3478eae32d8a..3478eae32d8a 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
+++ b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 8931c5f0e46b..9e9d0286e48f 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -159,6 +157,12 @@ config S3C_GPIO_CFG_S3C64XX
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
+config S5P_GPIO_CFG_S5PC1XX
+	bool
+	help
+	  Internal configuration to enable S5PC1XX style GPIO configuration
+	  functions.
+
 # DMA
 
 config S3C_DMA
@@ -178,6 +182,11 @@ config S3C_DEV_HSMMC1
 	help
 	  Compile in platform device definitions for HSMMC channel 1
 
+config S3C_DEV_HSMMC2
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 2
+
 config S3C_DEV_I2C1
 	bool
 	help
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 3c09109e9e84..50444da98425 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_HAVE_PWM)		+= pwm.o
 
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
+obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
index 4d01ef1a25dd..619cfa82dcab 100644
--- a/arch/arm/plat-s3c/clock.c
+++ b/arch/arm/plat-s3c/clock.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/clock.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX Core clock control support
@@ -337,7 +337,7 @@ int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
 
 int __init s3c24xx_register_baseclocks(unsigned long xtal)
 {
-	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+	printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n");
 
 	clk_xtal.rate = xtal;
 
diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-s3c/dev-hsmmc2.c
new file mode 100644
index 000000000000..824580bc0e06
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-hsmmc2.c
@@ -0,0 +1,69 @@
+/* linux/arch/arm/plat-s3c/dev-hsmmc2.c
+ *
+ * Copyright (c) 2009 Samsung Electronics
+ * Copyright (c) 2009 Maurus Cuelenaere
+ *
+ * Based on arch/arm/plat-s3c/dev-hsmmc1.c
+ * original file Copyright (c) 2008 Simtec Electronics
+ *
+ * S3C series device definition for hsmmc device 2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+
+#define S3C_SZ_HSMMC	(0x1000)
+
+static struct resource s3c_hsmmc2_resource[] = {
+	[0] = {
+		.start = S3C_PA_HSMMC2,
+		.end   = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_HSMMC2,
+		.end   = IRQ_HSMMC2,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc2 = {
+	.name		= "s3c-sdhci",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc2_resource),
+	.resource	= s3c_hsmmc2_resource,
+	.dev		= {
+		.dma_mask		= &s3c_device_hsmmc2_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+		.platform_data		= &s3c_hsmmc2_def_platdata,
+	},
+};
+
+void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
+
+	set->max_width = pd->max_width;
+
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->cfg_card)
+		set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c
index 428372868fbb..4c761529b949 100644
--- a/arch/arm/plat-s3c/dev-i2c0.c
+++ b/arch/arm/plat-s3c/dev-i2c0.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c/dev-i2c0.c
  *
- * Copyright 2008,2009 Simtec Electronics
+ * Copyright 2008-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c
index 8349c462788c..d44f79110506 100644
--- a/arch/arm/plat-s3c/dev-i2c1.c
+++ b/arch/arm/plat-s3c/dev-i2c1.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c/dev-i2c1.c
  *
- * Copyright 2008,2009 Simtec Electronics
+ * Copyright 2008-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
index 4e5323732434..e771e77dcd54 100644
--- a/arch/arm/plat-s3c/dev-nand.c
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -9,8 +9,12 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
 #include <mach/map.h>
 #include <plat/devs.h>
+#include <plat/nand.h>
 
 static struct resource s3c_nand_resource[] = {
 	[0] = {
@@ -28,3 +32,96 @@ struct platform_device s3c_device_nand = {
 };
 
 EXPORT_SYMBOL(s3c_device_nand);
+
+/**
+ * s3c_nand_copy_set() - copy nand set data
+ * @set: The new structure, directly copied from the old.
+ *
+ * Copy all the fields from the NAND set field from what is probably __initdata
+ * to new kernel memory. The code returns 0 if the copy happened correctly or
+ * an error code for the calling function to display.
+ *
+ * Note, we currently do not try and look to see if we've already copied the
+ * data in a previous set.
+ */
+static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
+{
+	void *ptr;
+	int size;
+
+	size = sizeof(struct mtd_partition) * set->nr_partitions;
+	if (size) {
+		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
+		set->partitions = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+	
+	size = sizeof(int) * set->nr_chips;
+	if (size) {
+		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
+		set->nr_map = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+
+	if (set->ecc_layout) {
+		ptr = kmemdup(set->ecc_layout,
+			      sizeof(struct nand_ecclayout), GFP_KERNEL);
+		set->ecc_layout = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+	
+	return 0;
+}
+
+void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
+{
+	struct s3c2410_platform_nand *npd;
+	int size;
+	int ret;
+
+	/* note, if we get a failure in allocation, we simply drop out of the
+	 * function. If there is so little memory available at initialisation
+	 * time then there is little chance the system is going to run.
+	 */ 
+
+	npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL);
+	if (!npd) {
+		printk(KERN_ERR "%s: failed copying platform data\n", __func__);
+		return;
+	}
+
+	/* now see if we need to copy any of the nand set data */
+
+	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
+	if (size) {
+		struct s3c2410_nand_set *from = npd->sets;
+		struct s3c2410_nand_set *to;
+		int i;
+
+		to = kmemdup(from, size, GFP_KERNEL);
+		npd->sets = to;	/* set, even if we failed */
+
+		if (!to) {
+			printk(KERN_ERR "%s: no memory for sets\n", __func__);
+			return;
+		}
+		
+		for (i = 0; i < npd->nr_sets; i++) {
+			ret = s3c_nand_copy_set(to);
+			if (!ret) {
+				printk(KERN_ERR "%s: failed to copy set %d\n",
+				__func__, i);
+				return;
+			}
+			to++;
+		}
+	}
+}
+
+EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c
index c9db75c06af5..a995850cd9d5 100644
--- a/arch/arm/plat-s3c/dma.c
+++ b/arch/arm/plat-s3c/dma.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c/dma.c
  *
- * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h
index 0f440b9168db..53a93656d5db 100644
--- a/arch/arm/plat-s3c/include/plat/audio-simtec.h
+++ b/arch/arm/plat-s3c/include/plat/audio-simtec.h
@@ -33,5 +33,5 @@ struct s3c24xx_audio_simtec_pdata {
 	void	(*startup)(void);
 };
 
-extern int simtec_audio_add(const char *codec_name,
+extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
 			    struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/plat-s3c/include/plat/audio.h b/arch/arm/plat-s3c/include/plat/audio.h
index de0e8da48bc3..f22d23bb6271 100644
--- a/arch/arm/plat-s3c/include/plat/audio.h
+++ b/arch/arm/plat-s3c/include/plat/audio.h
@@ -1,45 +1,17 @@
-/* arch/arm/mach-s3c2410/include/mach/audio.h
+/* arch/arm/plat-s3c/include/plat/audio.h
  *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Audio platfrom_device info
+ * Copyright (c) 2009 Samsung Electronics Co. Ltd
+ * Author: Jaswinder Singh <jassi.brar@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_AUDIO_H
-#define __ASM_ARCH_AUDIO_H __FILE__
-
-/* struct s3c24xx_iis_ops
- *
- * called from the s3c24xx audio core to deal with the architecture
- * or the codec's setup and control.
- *
- * the pointer to itself is passed through in case the caller wants to
- * embed this in an larger structure for easy reference to it's context.
-*/
+ */
 
-struct s3c24xx_iis_ops {
-	struct module *owner;
-
-	int	(*startup)(struct s3c24xx_iis_ops *me);
-	void	(*shutdown)(struct s3c24xx_iis_ops *me);
-	int	(*suspend)(struct s3c24xx_iis_ops *me);
-	int	(*resume)(struct s3c24xx_iis_ops *me);
-
-	int	(*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
-	int	(*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
-	int	(*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
+/**
+ * struct s3c_audio_pdata - common platform data for audio device drivers
+ * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
+ */
+struct s3c_audio_pdata {
+	int (*cfg_gpio)(struct platform_device *);
 };
-
-struct s3c24xx_platdata_iis {
-	const char		*codec_clk;
-	struct s3c24xx_iis_ops	*ops;
-	int			(*match_dev)(struct device *dev);
-};
-
-#endif /* __ASM_ARCH_AUDIO_H */
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index 7b982b7f28cd..94eb06a2ea5c 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/cpu-freq.h
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index fbc3d498e02e..d1131ca11e97 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -12,6 +12,9 @@
 
 /* todo - fix when rmk changes iodescs to use `void __iomem *` */
 
+#ifndef __SAMSUNG_PLAT_CPU_H
+#define __SAMSUNG_PLAT_CPU_H
+
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef MHZ
@@ -73,3 +76,6 @@ extern struct sysdev_class s3c2443_sysclass;
 extern struct sysdev_class s3c6410_sysclass;
 extern struct sysdev_class s3c64xx_sysclass;
 
+extern void (*s5pc1xx_idle)(void);
+
+#endif
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 0f540ea1e999..932cbbbb4273 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -28,6 +28,9 @@ extern struct platform_device s3c64xx_device_iis0;
 extern struct platform_device s3c64xx_device_iis1;
 extern struct platform_device s3c64xx_device_iisv4;
 
+extern struct platform_device s3c64xx_device_pcm0;
+extern struct platform_device s3c64xx_device_pcm1;
+
 extern struct platform_device s3c_device_fb;
 extern struct platform_device s3c_device_usb;
 extern struct platform_device s3c_device_lcd;
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h
index 34dba98f08e1..e429d10be3ad 100644
--- a/arch/arm/plat-s3c/include/plat/dma.h
+++ b/arch/arm/plat-s3c/include/plat/dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C DMA support
diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-s3c/include/plat/fb.h
index 214ff561b0dd..f8db87930f8b 100644
--- a/arch/arm/plat-s3c/include/plat/fb.h
+++ b/arch/arm/plat-s3c/include/plat/fb.h
@@ -70,4 +70,11 @@ extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
  */
 extern void s3c64xx_fb_gpio_setup_24bpp(void);
 
+/**
+ * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5pc100_fb_gpio_setup_24bpp(void);
+
 #endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
index 67450f115748..3083df00dee6 100644
--- a/arch/arm/plat-s3c/include/plat/iic.h
+++ b/arch/arm/plat-s3c/include/plat/iic.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/iic.h
  *
- * Copyright 2004,2009 Simtec Electronics
+ * Copyright 2004-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C - I2C Controller platform_device info
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
index 18f958801e64..065985978413 100644
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ b/arch/arm/plat-s3c/include/plat/nand.h
@@ -55,3 +55,11 @@ struct s3c2410_platform_nand {
 					       int chip);
 };
 
+/**
+ * s3c_nand_set_platdata() - register NAND platform data.
+ * @nand: The NAND platform data to register with s3c_device_nand.
+ *
+ * This function copies the given NAND platform data, @nand and registers
+ * it with the s3c_device_nand. This allows @nand to be __initdata.
+*/
+extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
new file mode 100644
index 000000000000..a60ed0d06c94
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
@@ -0,0 +1,235 @@
+/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards and specifically the S3C64XX series
+ * S3C6400 and S3C6410.
+ *
+ * The file contains the cpu specific items which change between whichever
+ * architecture is selected. See <plat/regs-fb.h> for the core definitions
+ * that are the same.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* include the core definitions here, in case we really do need to
+ * override them at a later date.
+*/
+
+#include <plat/regs-fb.h>
+
+#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
+#define VIDCON1_FSTATUS_EVEN	(1 << 15)
+
+/* Video timing controls */
+#define VIDTCON0				(0x10)
+#define VIDTCON1				(0x14)
+#define VIDTCON2				(0x18)
+
+/* Window position controls */
+
+#define WINCON(_win)				(0x20 + ((_win) * 4))
+
+/* OSD1 and OSD4 do not have register D */
+
+#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
+#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
+#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
+#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
+
+
+#define VIDINTCON0				(0x130)
+
+#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
+
+/* WINCONx */
+
+#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
+#define WINCONx_CSCWIDTH_SHIFT			(26)
+#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
+#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
+
+#define WINCONx_ENLOCAL				(1 << 22)
+#define WINCONx_BUFSTATUS			(1 << 21)
+#define WINCONx_BUFSEL				(1 << 20)
+#define WINCONx_BUFAUTOEN			(1 << 19)
+#define WINCONx_YCbCr				(1 << 13)
+
+#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
+
+#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
+#define WINCON2_BLD_PIX				(1 << 6)
+
+#define WINCON2_ALPHA_SEL			(1 << 1)
+#define WINCON2_BPPMODE_MASK			(0xf << 2)
+#define WINCON2_BPPMODE_SHIFT			(2)
+#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
+#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define WINCON3_BLD_PIX				(1 << 6)
+
+#define WINCON3_ALPHA_SEL			(1 << 1)
+#define WINCON3_BPPMODE_MASK			(0xf << 2)
+#define WINCON3_BPPMODE_SHIFT			(2)
+#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
+
+#define DITHMODE				(0x170)
+#define WINxMAP(_win)				(0x180 + ((_win) * 4))
+
+
+#define DITHMODE_R_POS_MASK			(0x3 << 5)
+#define DITHMODE_R_POS_SHIFT			(5)
+#define DITHMODE_R_POS_8BIT			(0x0 << 5)
+#define DITHMODE_R_POS_6BIT			(0x1 << 5)
+#define DITHMODE_R_POS_5BIT			(0x2 << 5)
+
+#define DITHMODE_G_POS_MASK			(0x3 << 3)
+#define DITHMODE_G_POS_SHIFT			(3)
+#define DITHMODE_G_POS_8BIT			(0x0 << 3)
+#define DITHMODE_G_POS_6BIT			(0x1 << 3)
+#define DITHMODE_G_POS_5BIT			(0x2 << 3)
+
+#define DITHMODE_B_POS_MASK			(0x3 << 1)
+#define DITHMODE_B_POS_SHIFT			(1)
+#define DITHMODE_B_POS_8BIT			(0x0 << 1)
+#define DITHMODE_B_POS_6BIT			(0x1 << 1)
+#define DITHMODE_B_POS_5BIT			(0x2 << 1)
+
+#define DITHMODE_DITH_EN			(1 << 0)
+
+#define WPALCON					(0x1A0)
+
+/* Palette control */
+/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L),
+ * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */
+#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
+#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
+#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
+
+
+/* system specific implementation code for palette sizes, and other
+ * information that changes depending on which architecture is being
+ * compiled.
+*/
+
+/* return true if window _win has OSD register D */
+#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
+
+static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
+{
+	if (win < 2)
+		return 256;
+	if (win < 4)
+		return 16;
+	if (win == 4)
+		return 4;
+
+	BUG();	/* shouldn't get here */
+}
+
+static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
+{
+	/* all windows can do 1/2 bpp */
+
+	if ((bpp == 25 || bpp == 19) && win == 0)
+		return 0;	/* win 0 does not have 19 or 25bpp modes */
+
+	if (bpp == 4 && win == 4)
+		return 0;
+
+	if (bpp == 8 && (win >= 3))
+		return 0;	/* win 3/4 cannot do 8bpp in any mode */
+
+	return 1;
+}
+
+static inline int s3c_fb_pal_is16(unsigned int window)
+{
+	return window > 1;
+}
+
+struct s3c_fb_palette {
+	struct fb_bitfield	r;
+	struct fb_bitfield	g;
+	struct fb_bitfield	b;
+	struct fb_bitfield	a;
+};
+
+static inline void s3c_fb_init_palette(unsigned int window,
+				       struct s3c_fb_palette *palette)
+{
+	if (window < 2) {
+		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
+		palette->r.offset = 16;
+		palette->r.length = 8;
+		palette->g.offset = 8;
+		palette->g.length = 8;
+		palette->b.offset = 0;
+		palette->b.length = 8;
+	} else {
+		/* currently we assume RGB 5/6/5 */
+		palette->r.offset = 11;
+		palette->r.length = 5;
+		palette->g.offset = 5;
+		palette->g.length = 6;
+		palette->b.offset = 0;
+		palette->b.length = 5;
+	}
+}
+
+/* Notes on per-window bpp settings
+ *
+ * Value	Win0	 Win1	  Win2	   Win3	    Win 4
+ * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
+ * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
+ * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
+ * 0011		8(P)	 8(P)     -none-   -none-   -none-
+ * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
+ * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
+ * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
+ * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
+ * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
+ * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
+ * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
+ * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
+ * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
+ * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
+ * 1110		-none-	 -none-	  -none-   -none-    -none-
+ * 1111		-none-	 -none-   -none-   -none-    -none-
+*/
diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-s3c/include/plat/regs-nand.h
index b2caa4bca270..238efea7b9e4 100644
--- a/arch/arm/plat-s3c/include/plat/regs-nand.h
+++ b/arch/arm/plat-s3c/include/plat/regs-nand.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-nand.h
  *
- * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk>
+ *	http://www.simtec.co.uk/products/SWLINUX/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
index 07659dad1748..abf2fbc2eb2f 100644
--- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
@@ -67,6 +67,8 @@
 #define S3C2412_IISMOD_BCLK_MASK	(3 << 1)
 #define S3C2412_IISMOD_8BIT		(1 << 0)
 
+#define S3C64XX_IISMOD_CDCLKCON		(1 << 12)
+
 #define S3C2412_IISPSR_PSREN		(1 << 15)
 
 #define S3C2412_IISFIC_TXFLUSH		(1 << 15)
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index 66af75a5cdd1..85d8904e7f24 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -6,7 +6,7 @@
  *
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
  *
- *  Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk)
+ *  Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk)
  *
  *  Adapted from:
  *
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
index f615308ccdfb..53198673b6bd 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -57,6 +57,7 @@ struct s3c_sdhci_platdata {
  */
 extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
 extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
 
 /* Default platform data, exported so that per-cpu initialisation can
  * set the correct one when there are more than one cpu type selected.
@@ -64,11 +65,16 @@ extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
 
 extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
 
 /* Helper function availablity */
 
 extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 
 /* S3C6400 SDHCI setup */
 
@@ -103,6 +109,17 @@ static inline void s3c6400_default_sdhci1(void)
 static inline void s3c6400_default_sdhci1(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6400_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
 #else
 static inline void s3c6400_default_sdhci0(void) { }
 static inline void s3c6400_default_sdhci1(void) { }
@@ -140,9 +157,70 @@ static inline void s3c6410_default_sdhci1(void)
 static inline void s3c6410_default_sdhci1(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6410_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
 #else
 static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void) { }
 #endif /* CONFIG_S3C6410_SETUP_SDHCI */
 
+/* S5PC100 SDHCI setup */
+
+#ifdef CONFIG_S5PC100_SETUP_SDHCI
+extern char *s5pc100_hsmmc_clksrcs[4];
+
+extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+					   void __iomem *r,
+					   struct mmc_ios *ios,
+					   struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s5pc100_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s5pc100_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s5pc100_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+static inline void s5pc100_default_sdhci1(void) { }
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+
 #endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c
index 39f2555564da..8eb1f439861c 100644
--- a/arch/arm/plat-s3c/pm-check.c
+++ b/arch/arm/plat-s3c/pm-check.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s3c/pm-check.c
  *  originally in linux/arch/arm/plat-s3c24xx/pm.c
  *
- * Copyright (c) 2004,2006,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 8d97db2c7a0d..767470601e5c 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s3c/pm.c
  *
  * Copyright 2008 Openmoko, Inc.
- * Copyright 2004,2006,2008 Simtec Electronics
+ * Copyright 2004-2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c
index 4fdc5b307fd2..ef019f27b67d 100644
--- a/arch/arm/plat-s3c/pwm.c
+++ b/arch/arm/plat-s3c/pwm.c
@@ -368,7 +368,7 @@ static int s3c_pwm_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int s3c_pwm_remove(struct platform_device *pdev)
+static int __devexit s3c_pwm_remove(struct platform_device *pdev)
 {
 	struct pwm_device *pwm = platform_get_drvdata(pdev);
 
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 9c7aca489643..342647eb91d8 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c24xx/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -178,4 +176,11 @@ config MACH_SMDK
 	help
 	  Common machine code for SMDK2410 and SMDK2440
 
+config S3C24XX_SIMTEC_AUDIO
+	bool
+	depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
+	default y
+	help
+	  Add audio devices for common Simtec S3C24XX boards
+
 endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 7780d2dd833a..5dee8c12e8b4 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -55,3 +55,4 @@ obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10)	 += spi-bus1-gpd8_9_10.o
 # machine common support
 
 obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
+obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO)	+= simtec-audio.o
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index df47322492d5..ce47627f3368 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -365,7 +365,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int s3c_adc_remove(struct platform_device *pdev)
+static int __devexit s3c_adc_remove(struct platform_device *pdev)
 {
 	struct adc_device *adc = platform_get_drvdata(pdev);
 
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index 0afb217a775e..ac061a1bcb37 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/clock-dclk.c
  *
- * Copyright (c) 2004,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index aa119863c5ce..9e0e20ad2e46 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -198,7 +198,7 @@ void __init smdk_machine_init(void)
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;
 
-	s3c_device_nand.dev.platform_data = &smdk_nand_info;
+	s3c_nand_set_platdata(&smdk_nand_info);
 
 	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
 
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index 4f1b789a1173..2d42efb9f4e9 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/cpu-freq.c
  *
- * Copyright (c) 2006,2007,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index f046f8c51084..f0ea7943ac5a 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/dma.c
  *
- * Copyright (c) 2003-2005,2006 Simtec Electronics
+ * Copyright 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 DMA core
@@ -1310,7 +1310,7 @@ int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
 	int channel;
 	int ret;
 
-	printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
+	printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n");
 
 	dma_channels = channels;
 
@@ -1403,11 +1403,13 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
 		ord = &dma_order->channels[channel];
 
 		for (ch = 0; ch < dma_channels; ch++) {
+			int tmp;
 			if (!is_channel_valid(ord->list[ch]))
 				continue;
 
-			if (s3c2410_chans[ord->list[ch]].in_use == 0) {
-				ch = ord->list[ch] & ~DMA_CH_VALID;
+			tmp = ord->list[ch] & ~DMA_CH_VALID;
+			if (s3c2410_chans[tmp].in_use == 0) {
+				ch = tmp;
 				goto found;
 			}
 		}
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index c776120b99e6..33d421d78bad 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/cpu-freq.h
  *
- * Copyright (c) 2006,2007,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index c4d133436fc7..bd534d32b993 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -64,7 +64,7 @@
 /* the calculation for the VA of this must ensure that
  * it is the same distance apart from the UART in the
  * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
+ * is done as a 1:1 mapping. This puts it (currently) at
  * 0xFA800000, which is not in the way of any current mapping
  * by the base system.
 */
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index c2cef6139683..36aaa10fad06 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -1,6 +1,31 @@
 #ifndef _ARCH_MCI_H
 #define _ARCH_MCI_H
 
+/**
+ * struct s3c24xx_mci_pdata - sd/mmc controller platform data
+ * @no_wprotect: Set this to indicate there is no write-protect switch.
+ * @no_detect: Set this if there is no detect switch.
+ * @wprotect_invert: Invert the default sense of the write protect switch.
+ * @detect_invert: Invert the default sense of the write protect switch.
+ * @use_dma: Set to allow the use of DMA.
+ * @gpio_detect: GPIO number for the card detect line.
+ * @gpio_wprotect: GPIO number for the write protect line.
+ * @ocr_avail: The mask of the available power states, non-zero to use.
+ * @set_power: Callback to control the power mode.
+ *
+ * The @gpio_detect is used for card detection when @no_wprotect is unset,
+ * and the default sense is that 0 returned from gpio_get_value() means
+ * that a card is inserted. If @detect_invert is set, then the value from
+ * gpio_get_value() is inverted, which makes 1 mean card inserted.
+ *
+ * The driver will use @gpio_wprotect to signal whether the card is write
+ * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
+ * means the card is read/write, and 1 means read-only. The @wprotect_invert
+ * will invert the value returned from gpio_get_value().
+ *
+ * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
+ * to a non-zero value, otherwise the default of 3.2-3.4V is used.
+ */
 struct s3c24xx_mci_pdata {
 	unsigned int	no_wprotect : 1;
 	unsigned int	no_detect : 1;
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
index 3bc0a216df97..1b0f4c36d384 100644
--- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C24XX DMA support
diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c
index b7acf1a8ecd2..ea8dea3339a4 100644
--- a/arch/arm/plat-s3c24xx/irq-pm.c
+++ b/arch/arm/plat-s3c24xx/irq-pm.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/irq-om.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index d02f5f02045e..ad0d44ef1f93 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics 
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -522,6 +522,8 @@ int s3c24xx_set_fiq(unsigned int irq, bool on)
 	__raw_writel(intmod, S3C2410_INTMOD);
 	return 0;
 }
+
+EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
 #endif
 
 
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index da0d3217d3e3..663b280d65da 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/pm-simtec.c
  *
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://armlinux.simtec.co.uk/
@@ -35,7 +35,7 @@
 
 #include <plat/pm.h>
 
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
 
 /* pm_simtec_init
  *
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 56e5253ca02c..3620dd299095 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/pm.c
  *
- * Copyright (c) 2004,2006 Simtec Electronics
+ * Copyright (c) 2004-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX Power Manager (Suspend-To-RAM) support
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
index d0a3a145cd4d..963fb0b4379e 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
  *
- * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index fd45e47facbc..24993dce10b5 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
  *
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
index ae2e6c604f27..976002fb1b8f 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
  *
- * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@simtec.co.uk>
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
index ff9443b233aa..49f65032f2c0 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@arm.linux.org.uk>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index dde41f171aff..79371091aa38 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
  *
- * Copyright (c) 2004-2005,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index 0902afd227ca..a75c0c2431ea 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/plat-s3c24xx/simtec-audio.c b/arch/arm/plat-s3c24xx/simtec-audio.c
new file mode 100644
index 000000000000..6bc832e0d8ea
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/simtec-audio.c
@@ -0,0 +1,77 @@
+/* linux/arch/arm/plat-s3c24xx/simtec-audio.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Audio setup for various Simtec S3C24XX implementations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/bast-cpld.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/audio-simtec.h>
+#include <plat/devs.h>
+
+/* platform ops for audio */
+
+static void simtec_audio_startup_lrroute(void)
+{
+	unsigned int tmp;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	tmp = __raw_readb(BAST_VA_CTRL1);
+	tmp &= ~BAST_CPLD_CTRL1_LRMASK;
+	tmp |= BAST_CPLD_CTRL1_LRCDAC;
+	__raw_writeb(tmp, BAST_VA_CTRL1);
+
+	local_irq_restore(flags);
+}
+
+static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata;
+static char our_name[32];
+
+static struct platform_device simtec_audio_dev = {
+	.name	= our_name,
+	.id	= -1,
+	.dev	= {
+		.parent		= &s3c_device_iis.dev,
+		.platform_data	= &simtec_audio_platdata,
+	},
+};
+
+int __init simtec_audio_add(const char *name, bool has_lr_routing,
+			    struct s3c24xx_audio_simtec_pdata *spd)
+{
+	if (!name)
+		name = "tlv320aic23";
+
+	snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name);
+
+	/* copy platform data so the source can be __initdata */
+	if (spd)
+		simtec_audio_platdata = *spd;
+
+	if (has_lr_routing)
+		simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
+
+	platform_device_register(&s3c_device_iis);
+	platform_device_register(&simtec_audio_dev);
+	return 0;
+}
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index bcfa778614d8..e6da87a5885c 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c64xx/Kconfig
-#
 # Copyright 2008 Openmoko, Inc.
 # Copyright 2008 Simtec Electronics
 #	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index b1fdd83940a6..49796d2db86d 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -107,6 +107,11 @@ static struct map_desc s3c_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+		.length		= SZ_1K,
+		.type		= MT_DEVICE,
 	},
 };
 
diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/plat-s3c64xx/cpufreq.c
index e6e0843215df..74c0e8347de5 100644
--- a/arch/arm/plat-s3c64xx/cpufreq.c
+++ b/arch/arm/plat-s3c64xx/cpufreq.c
@@ -19,6 +19,7 @@
 
 static struct clk *armclk;
 static struct regulator *vddarm;
+static unsigned long regulator_latency;
 
 #ifdef CONFIG_CPU_S3C6410
 struct s3c64xx_dvfs {
@@ -27,11 +28,10 @@ struct s3c64xx_dvfs {
 };
 
 static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
-	[0] = { 1000000, 1000000 },
-	[1] = { 1000000, 1050000 },
-	[2] = { 1050000, 1100000 },
-	[3] = { 1050000, 1150000 },
-	[4] = { 1250000, 1350000 },
+	[0] = { 1000000, 1150000 },
+	[1] = { 1050000, 1150000 },
+	[2] = { 1100000, 1150000 },
+	[3] = { 1200000, 1350000 },
 };
 
 static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
@@ -41,9 +41,9 @@ static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
 	{ 1, 266000 },
 	{ 2, 333000 },
 	{ 2, 400000 },
-	{ 3, 532000 },
-	{ 3, 533000 },
-	{ 4, 667000 },
+	{ 2, 532000 },
+	{ 2, 533000 },
+	{ 3, 667000 },
 	{ 0, CPUFREQ_TABLE_END },
 };
 #endif
@@ -141,7 +141,7 @@ err:
 }
 
 #ifdef CONFIG_REGULATOR
-static void __init s3c64xx_cpufreq_constrain_voltages(void)
+static void __init s3c64xx_cpufreq_config_regulator(void)
 {
 	int count, v, i, found;
 	struct cpufreq_frequency_table *freq;
@@ -150,11 +150,10 @@ static void __init s3c64xx_cpufreq_constrain_voltages(void)
 	count = regulator_count_voltages(vddarm);
 	if (count < 0) {
 		pr_err("cpufreq: Unable to check supported voltages\n");
-		return;
 	}
 
 	freq = s3c64xx_freq_table;
-	while (freq->frequency != CPUFREQ_TABLE_END) {
+	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
 		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
 			continue;
 
@@ -175,6 +174,10 @@ static void __init s3c64xx_cpufreq_constrain_voltages(void)
 
 		freq++;
 	}
+
+	/* Guess based on having to do an I2C/SPI write; in future we
+	 * will be able to query the regulator performance here. */
+	regulator_latency = 1 * 1000 * 1000;
 }
 #endif
 
@@ -206,7 +209,7 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 		pr_err("cpufreq: Only frequency scaling available\n");
 		vddarm = NULL;
 	} else {
-		s3c64xx_cpufreq_constrain_voltages();
+		s3c64xx_cpufreq_config_regulator();
 	}
 #endif
 
@@ -217,8 +220,11 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 		/* Check for frequencies we can generate */
 		r = clk_round_rate(armclk, freq->frequency * 1000);
 		r /= 1000;
-		if (r != freq->frequency)
+		if (r != freq->frequency) {
+			pr_debug("cpufreq: %dkHz unsupported by clock\n",
+				 freq->frequency);
 			freq->frequency = CPUFREQ_ENTRY_INVALID;
+		}
 
 		/* If we have no regulator then assume startup
 		 * frequency is the maximum we can support. */
@@ -230,9 +236,11 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 
 	policy->cur = clk_get_rate(armclk) / 1000;
 
-	/* Pick a conservative guess in ns: we'll need ~1 I2C/SPI
-	 * write plus clock reprogramming. */
-	policy->cpuinfo.transition_latency = 2 * 1000 * 1000;
+	/* Datasheet says PLL stabalisation time (if we were to use
+	 * the PLLs, which we don't currently) is ~300us worst case,
+	 * but add some fudge.
+	 */
+	policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;
 
 	ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
 	if (ret != 0) {
diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
index 1322beb40dd7..a21a88fbb7e3 100644
--- a/arch/arm/plat-s3c64xx/dev-audio.c
+++ b/arch/arm/plat-s3c64xx/dev-audio.c
@@ -15,9 +15,14 @@
 
 #include <mach/irqs.h>
 #include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/gpio.h>
 
 #include <plat/devs.h>
-
+#include <plat/audio.h>
+#include <plat/gpio-bank-d.h>
+#include <plat/gpio-bank-e.h>
+#include <plat/gpio-cfg.h>
 
 static struct resource s3c64xx_iis0_resource[] = {
 	[0] = {
@@ -66,3 +71,97 @@ struct platform_device s3c64xx_device_iisv4 = {
 	.resource	  = s3c64xx_iisv4_resource,
 };
 EXPORT_SYMBOL(s3c64xx_device_iisv4);
+
+
+/* PCM Controller platform_devices */
+
+static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s3c64xx_pcm0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM0,
+		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm0_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
+	.resource	  = s3c64xx_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm0);
+
+static struct resource s3c64xx_pcm1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM1,
+		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm1_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
+	.resource	  = s3c64xx_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm1);
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index 92859290ea33..778560457277 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -213,6 +213,11 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
 	.get_pull	= s3c_gpio_getpull_updown,
 };
 
+int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
+{
+	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
 static struct s3c_gpio_chip gpio_4bit[] = {
 	{
 		.base	= S3C64XX_GPA_BASE,
@@ -269,10 +274,16 @@ static struct s3c_gpio_chip gpio_4bit[] = {
 			.base	= S3C64XX_GPM(0),
 			.ngpio	= S3C64XX_GPIO_M_NR,
 			.label	= "GPM",
+			.to_irq = s3c64xx_gpio2int_gpm,
 		},
 	},
 };
 
+int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
+{
+	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+
 static struct s3c_gpio_chip gpio_4bit2[] = {
 	{
 		.base	= S3C64XX_GPH_BASE + 0x4,
@@ -297,6 +308,7 @@ static struct s3c_gpio_chip gpio_4bit2[] = {
 			.base	= S3C64XX_GPL(0),
 			.ngpio	= S3C64XX_GPIO_L_NR,
 			.label	= "GPL",
+			.to_irq = s3c64xx_gpio2int_gpl,
 		},
 	},
 };
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
index c47daf7e2723..e22b49f4f982 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
@@ -36,18 +36,18 @@
 
 #define S3C64XX_GPC4_SPI_MISO1		(0x02 << 16)
 #define S3C64XX_GPC4_MMC2_CMD		(0x03 << 16)
-#define S3C64XX_GPC4_I2S0_V40_DO	(0x05 << 16)
+#define S3C64XX_GPC4_I2S_V40_DO0	(0x05 << 16)
 #define S3C64XX_GPC4_EINT_G2_4		(0x07 << 16)
 
 #define S3C64XX_GPC5_SPI_CLK1		(0x02 << 20)
 #define S3C64XX_GPC5_MMC2_CLK		(0x03 << 20)
-#define S3C64XX_GPC5_I2S1_V40_DO	(0x05 << 20)
+#define S3C64XX_GPC5_I2S_V40_DO1	(0x05 << 20)
 #define S3C64XX_GPC5_EINT_G2_5		(0x07 << 20)
 
 #define S3C64XX_GPC6_SPI_MOSI1		(0x02 << 24)
 #define S3C64XX_GPC6_EINT_G2_6		(0x07 << 24)
 
 #define S3C64XX_GPC7_SPI_nCS1		(0x02 << 28)
-#define S3C64XX_GPC7_I2S2_V40_DO	(0x05 << 28)
+#define S3C64XX_GPC7_I2S_V40_DO2	(0x05 << 28)
 #define S3C64XX_GPC7_EINT_G2_7		(0x07 << 28)
 
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
index f81b7b818ba0..ebdf183a0911 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -65,7 +65,7 @@ static void s3c_irq_eint_maskack(unsigned int irq)
 static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 {
 	int offs = eint_offset(irq);
-	int pin;
+	int pin, pin_val;
 	int shift;
 	u32 ctrl, mask;
 	u32 newvalue = 0;
@@ -109,7 +109,10 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 		return -1;
 	}
 
-	shift = (offs / 2) * 4;
+	if (offs <= 15)
+		shift = (offs / 2) * 4;
+	else
+		shift = ((offs - 16) / 2) * 4;
 	mask = 0x7 << shift;
 
 	ctrl = __raw_readl(reg);
@@ -119,12 +122,18 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 
 	/* set the GPIO pin appropriately */
 
-	if (offs < 23)
+	if (offs < 16) {
 		pin = S3C64XX_GPN(offs);
-	else
+		pin_val = S3C_GPIO_SFN(2);
+	} else if (offs < 23) {
+		pin = S3C64XX_GPL(offs + 8 - 16);
+		pin_val = S3C_GPIO_SFN(3);
+	} else {
 		pin = S3C64XX_GPM(offs - 23);
+		pin_val = S3C_GPIO_SFN(3);
+	}
 
-	s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+	s3c_gpio_cfgpin(pin, pin_val);
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
index 5417123b0ac1..a58c0cc7ba5e 100644
--- a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
@@ -53,3 +53,23 @@ void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
 	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
 }
+
+void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(6 + width);
+
+	/* Set all the necessary GPH pins to special-function 1 */
+	for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Set all the necessary GPC pins to special-function 1 */
+	for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index a8a711c3c064..b7b9e91c0243 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s5pc1xx/Kconfig
-#
 # Copyright 2009 Samsung Electronics Co.
 #	Byungho Min <bhmin@samsung.com>
 #
@@ -15,6 +13,9 @@ config PLAT_S5PC1XX
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_GPIO_TRACK
 	select S3C_GPIO_PULL_UPDOWN
+	select S3C_GPIO_CFG_S3C24XX
+	select S3C_GPIO_CFG_S3C64XX
+	select S5P_GPIO_CFG_S5PC1XX
 	help
 	  Base platform code for any Samsung S5PC1XX device
 
@@ -34,7 +35,12 @@ config CPU_S5PC100_CLOCK
 
 # platform specific device setup
 
-config S5PC100_SETUP_I2C0
+config S5PC1XX_SETUP_FB_24BPP
+	bool
+	help
+          Common setup code for S5PC1XX with an 24bpp RGB display helper.
+
+config S5PC1XX_SETUP_I2C0
 	bool
 	default y
 	help
@@ -43,8 +49,14 @@ config S5PC100_SETUP_I2C0
 	  Note, currently since i2c0 is always compiled, this setup helper
 	  is always compiled with it.
 
-config S5PC100_SETUP_I2C1
+config S5PC1XX_SETUP_I2C1
 	bool
 	help
 	  Common setup code for i2c bus 1.
+
+config S5PC1XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
 endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
index f1ecb2c37ee2..278f26806089 100644
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -13,7 +13,9 @@ obj-				:=
 
 obj-y				+= dev-uart.o
 obj-y				+= cpu.o
-obj-y				+= irq.o
+obj-y				+= irq.o irq-gpio.o irq-eint.o
+obj-y				+= clock.o
+obj-y				+= gpiolib.o
 
 # CPU support
 
@@ -22,5 +24,8 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
 
 # Device setup
 
-obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
+obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
new file mode 100644
index 000000000000..26c21d849790
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/clock.c
@@ -0,0 +1,728 @@
+/* linux/arch/arm/plat-s5pc1xx/clock.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * S5PC1XX Base clock support
+ *
+ * Based on plat-s3c64xx/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-clock.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5PC100_CLKSRC1);
+	if (enable)
+		val |= S5PC100_CLKSRC1_CLK48M_MASK;
+	else
+		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+	__raw_writel(val, S5PC100_CLKSRC1);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+	.name		= "clk_54m",
+	.id		= -1,
+	.rate		= 54000000,
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 0;
+}
+
+static int clk_dummy_enable(struct clk *clk, int enable)
+{
+	return 0;
+}
+
+struct clk clk_hd0 = {
+	.name		= "hclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+	.enable		= clk_dummy_enable,
+};
+
+struct clk clk_pd0 = {
+	.name		= "pclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+	.enable		= clk_dummy_enable,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk s5pc100_init_clocks_disable[] = {
+	{
+		.name		= "dsi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
+	}, {
+		.name		= "csi",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
+	}, {
+		.name		= "ccan",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
+	}, {
+		.name		= "ccan",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
+	}, {
+		.name		= "keypad",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
+	}, {
+		.name		= "hclkd2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
+	}, {
+		.name		= "iis-d2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
+	},
+};
+
+static struct clk s5pc100_init_clocks[] = {
+	/* System1 (D0_0) devices */
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
+	}, {
+		.name		= "tzic",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
+	}, {
+		.name		= "cf-ata",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
+	}, {
+		.name		= "mdma",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
+	}, {
+		.name		= "g2d",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
+	}, {
+		.name		= "secss",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
+	}, {
+		.name		= "cssys",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
+	},
+
+	/* Memory (D0_1) devices */
+	{
+		.name		= "dmc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
+	}, {
+		.name		= "sromc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
+	}, {
+		.name		= "onenand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
+	}, {
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
+	}, {
+		.name		= "intmem",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
+	}, {
+		.name		= "ebi",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
+	},
+
+	/* System2 (D0_2) devices */
+	{
+		.name		= "seckey",
+		.id		= -1,
+		.parent		= &clk_pd0,
+		.enable		= s5pc100_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
+	}, {
+		.name		= "sdm",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
+	},
+
+	/* File (D1_0) devices */
+	{
+		.name		= "pdma",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
+	}, {
+		.name		= "pdma",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
+	}, {
+		.name		= "modem",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
+	},
+
+	/* Multimedia1 (D1_1) devices */
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
+	}, {
+		.name		= "rotator",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
+	}, {
+		.name		= "fimc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
+	}, {
+		.name		= "fimc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
+	}, {
+		.name		= "fimc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
+	}, {
+		.name		= "jpeg",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
+	}, {
+		.name		= "g3d",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
+	},
+
+	/* Multimedia2 (D1_2) devices */
+	{
+		.name		= "tv",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
+	}, {
+		.name		= "vp",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
+	}, {
+		.name		= "mixer",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
+	}, {
+		.name		= "hdmi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
+	}, {
+		.name		= "mfc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
+	},
+
+	/* System (D1_3) devices */
+	{
+		.name		= "chipid",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
+	}, {
+		.name		= "apc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
+	}, {
+		.name		= "iec",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
+	}, {
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
+	},
+
+	/* Connectivity (D1_4) devices */
+	{
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
+	}, {
+		.name		= "hdmi-i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
+	}, {
+		.name		= "irda",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
+	}, {
+		.name		= "hsitx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
+	}, {
+		.name		= "hsirx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
+	},
+
+	/* Audio (D1_5) devices */
+	{
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
+	}, {
+		.name		= "iis",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
+	}, {
+		.name		= "pcm",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
+	}, {
+		.name		= "pcm",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
+	}, {
+		.name		= "spdif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
+	}, {
+		.name		= "cg",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
+	},
+
+	/* Audio (D2_0) devices: all disabled */
+
+	/* Special Clocks 0 */
+	{
+		.name		= "sclk_hpm",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_HPM,
+	}, {
+		.name		= "sclk_onenand",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
+	}, {
+		.name		= "spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
+	}, {
+		.name		= "spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
+	}, {
+		.name		= "spi_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
+	}, {
+		.name		= "mmc_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
+	}, {
+		.name		= "mmc_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
+	}, {
+		.name		= "mmc_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
+	},
+	/* Special Clocks 1 */
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+	&clk_54m,
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+	int size;
+
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	clkp = s5pc100_init_clocks;
+	size = ARRAY_SIZE(s5pc100_init_clocks);
+
+	for (ptr = 0; ptr < size; ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clkp = s5pc100_init_clocks_disable;
+	size = ARRAY_SIZE(s5pc100_init_clocks_disable);
+
+	for (ptr = 0; ptr < size; ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
index 715a7330794d..02baeaa2a121 100644
--- a/arch/arm/plat-s5pc1xx/cpu.c
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -55,6 +55,16 @@ static struct cpu_table cpu_ids[] __initdata = {
 
 static struct map_desc s5pc1xx_iodesc[] __initdata = {
 	{
+		.virtual	= (unsigned long)S5PC1XX_VA_CLK_OTHER,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5PC100_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5PC1XX_VA_CHIPID,
 		.pfn		= __phys_to_pfn(S5PC1XX_PA_CHIPID),
 		.length		= SZ_16,
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
new file mode 100644
index 000000000000..bba675df9c75
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/gpio-config.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * S5PC1XX GPIO Configuration.
+ *
+ * Based on plat-s3c64xx/gpio-config.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/gpio-core.h>
+#include <plat/gpio-cfg-s5pc1xx.h>
+
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	void __iomem *reg;
+	int shift = off * 2;
+	u32 drvstr;
+
+	if (!chip)
+		return -EINVAL;
+
+	reg = chip->base + 0x0C;
+
+	drvstr = __raw_readl(reg);
+	drvstr = 0xffff & (0x3 << shift);
+	drvstr = drvstr >> shift;
+
+	return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
+			s5p_gpio_drvstr_t drvstr)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	void __iomem *reg;
+	int shift = off * 2;
+	u32 tmp;
+
+	if (!chip)
+		return -EINVAL;
+
+	reg = chip->base + 0x0C;
+
+	tmp = __raw_readl(reg);
+	tmp |= drvstr << shift;
+
+	__raw_writel(tmp, reg);
+
+	return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c
new file mode 100644
index 000000000000..facb410e7a71
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/gpiolib.c
@@ -0,0 +1,503 @@
+/*
+ * arch/arm/plat-s5pc1xx/gpiolib.c
+ *
+ *  Copyright 2009 Samsung Electronics Co
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S5PC1XX - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <mach/gpio-core.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/regs-gpio.h>
+
+/* S5PC100 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	INT Type
+ * A0	8	4Bit	GPIO_INT0
+ * A1	5	4Bit	GPIO_INT1
+ * B	8	4Bit	GPIO_INT2
+ * C	5	4Bit	GPIO_INT3
+ * D	7	4Bit	GPIO_INT4
+ * E0	8	4Bit	GPIO_INT5
+ * E1	6	4Bit	GPIO_INT6
+ * F0	8	4Bit	GPIO_INT7
+ * F1	8	4Bit	GPIO_INT8
+ * F2	8	4Bit	GPIO_INT9
+ * F3	4	4Bit	GPIO_INT10
+ * G0	8	4Bit	GPIO_INT11
+ * G1	3	4Bit	GPIO_INT12
+ * G2	7	4Bit	GPIO_INT13
+ * G3	7	4Bit	GPIO_INT14
+ * H0	8	4Bit	WKUP_INT
+ * H1	8	4Bit	WKUP_INT
+ * H2	8	4Bit	WKUP_INT
+ * H3	8	4Bit	WKUP_INT
+ * I	8	4Bit	GPIO_INT15
+ * J0	8	4Bit	GPIO_INT16
+ * J1	5	4Bit	GPIO_INT17
+ * J2	8	4Bit	GPIO_INT18
+ * J3	8	4Bit	GPIO_INT19
+ * J4	4	4Bit	GPIO_INT20
+ * K0	8	4Bit	None
+ * K1	6	4Bit	None
+ * K2	8	4Bit	None
+ * K3	8	4Bit	None
+ * L0	8	4Bit	None
+ * L1	8	4Bit	None
+ * L2	8	4Bit	None
+ * L3	8	4Bit	None
+ */
+
+#define OFF_GPCON	(0x00)
+#define OFF_GPDAT	(0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
+#if 1
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+/* The s5pc1xx_gpiolib routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *	        gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+ */
+
+static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + OFF_GPCON);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + OFF_GPCON);
+
+	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int s5pc1xx_gpiolib_output(struct gpio_chip *chip,
+				       unsigned offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + OFF_GPCON);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + OFF_GPDAT);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + OFF_GPDAT);
+	__raw_writel(con, base + OFF_GPCON);
+	__raw_writel(dat, base + OFF_GPDAT);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	return S3C_IRQ_GPIO(chip->base + offset);
+}
+
+static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
+{
+	int base;
+
+	base = chip->base - S5PC100_GPH0(0);
+	if (base == 0)
+		return IRQ_EINT(offset);
+	base = chip->base - S5PC100_GPH1(0);
+	if (base == 0)
+		return IRQ_EINT(8 + offset);
+	base = chip->base - S5PC100_GPH2(0);
+	if (base == 0)
+		return IRQ_EINT(16 + offset);
+	base = chip->base - S5PC100_GPH3(0);
+	if (base == 0)
+		return IRQ_EINT(24 + offset);
+	return -EINVAL;
+}
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_eint = {
+	.cfg_eint	= 0xf,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
+	{
+		.base	= S5PC100_GPA0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPA0(0),
+			.ngpio	= S5PC100_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.base	= S5PC100_GPA1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPA1(0),
+			.ngpio	= S5PC100_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.base	= S5PC100_GPB_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPB(0),
+			.ngpio	= S5PC100_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S5PC100_GPC_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPC(0),
+			.ngpio	= S5PC100_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5PC100_GPD_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPD(0),
+			.ngpio	= S5PC100_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S5PC100_GPE0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPE0(0),
+			.ngpio	= S5PC100_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.base	= S5PC100_GPE1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPE1(0),
+			.ngpio	= S5PC100_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.base	= S5PC100_GPF0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF0(0),
+			.ngpio	= S5PC100_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.base	= S5PC100_GPF1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF1(0),
+			.ngpio	= S5PC100_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.base	= S5PC100_GPF2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF2(0),
+			.ngpio	= S5PC100_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.base	= S5PC100_GPF3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF3(0),
+			.ngpio	= S5PC100_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.base	= S5PC100_GPG0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG0(0),
+			.ngpio	= S5PC100_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.base	= S5PC100_GPG1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG1(0),
+			.ngpio	= S5PC100_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.base	= S5PC100_GPG2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG2(0),
+			.ngpio	= S5PC100_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.base	= S5PC100_GPG3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG3(0),
+			.ngpio	= S5PC100_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.base	= S5PC100_GPH0_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH0(0),
+			.ngpio	= S5PC100_GPIO_H0_NR,
+			.label	= "GPH0",
+		},
+	}, {
+		.base	= S5PC100_GPH1_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH1(0),
+			.ngpio	= S5PC100_GPIO_H1_NR,
+			.label	= "GPH1",
+		},
+	}, {
+		.base	= S5PC100_GPH2_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH2(0),
+			.ngpio	= S5PC100_GPIO_H2_NR,
+			.label	= "GPH2",
+		},
+	}, {
+		.base	= S5PC100_GPH3_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH3(0),
+			.ngpio	= S5PC100_GPIO_H3_NR,
+			.label	= "GPH3",
+		},
+	}, {
+		.base	= S5PC100_GPI_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPI(0),
+			.ngpio	= S5PC100_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5PC100_GPJ0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ0(0),
+			.ngpio	= S5PC100_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.base	= S5PC100_GPJ1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ1(0),
+			.ngpio	= S5PC100_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.base	= S5PC100_GPJ2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ2(0),
+			.ngpio	= S5PC100_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.base	= S5PC100_GPJ3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ3(0),
+			.ngpio	= S5PC100_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.base	= S5PC100_GPJ4_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ4(0),
+			.ngpio	= S5PC100_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.base	= S5PC100_GPK0_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK0(0),
+			.ngpio	= S5PC100_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.base	= S5PC100_GPK1_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK1(0),
+			.ngpio	= S5PC100_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.base	= S5PC100_GPK2_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK2(0),
+			.ngpio	= S5PC100_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.base	= S5PC100_GPK3_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK3(0),
+			.ngpio	= S5PC100_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.base	= S5PC100_GPL0_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL0(0),
+			.ngpio	= S5PC100_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.base	= S5PC100_GPL1_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL1(0),
+			.ngpio	= S5PC100_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.base	= S5PC100_GPL2_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL2(0),
+			.ngpio	= S5PC100_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.base	= S5PC100_GPL3_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL3(0),
+			.ngpio	= S5PC100_GPIO_L3_NR,
+			.label	= "GPL3",
+		},
+	}, {
+		.base	= S5PC100_GPL4_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL4(0),
+			.ngpio	= S5PC100_GPIO_L4_NR,
+			.label	= "GPL4",
+		},
+	},
+};
+
+/* FIXME move from irq-gpio.c */
+extern struct irq_chip s5pc1xx_gpioint;
+extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
+
+static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = s5pc1xx_gpiolib_input;
+	chip->chip.direction_output = s5pc1xx_gpiolib_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+
+	/* Interrupt */
+	if (chip->config == &gpio_cfg) {
+		int i, irq;
+
+		chip->chip.to_irq = s5pc1xx_gpiolib_to_irq;
+
+		for (i = 0;  i < chip->chip.ngpio; i++) {
+			irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
+			set_irq_chip(irq, &s5pc1xx_gpioint);
+			set_irq_data(irq, &chip->chip);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID);
+		}
+	} else if (chip->config == &gpio_cfg_eint)
+		chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
+}
+
+static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips,
+				       int nr_chips,
+				       void (*fn)(struct s3c_gpio_chip *))
+{
+	for (; nr_chips > 0; nr_chips--, chips++) {
+		if (fn)
+			(fn)(chips);
+		s3c_gpiolib_add(chips);
+	}
+}
+
+static __init int s5pc1xx_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chips;
+	int nr_chips;
+
+		chips = s5pc100_gpio_chips;
+		nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+
+	s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link);
+	/* Interrupt */
+	set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
+
+	return 0;
+}
+core_initcall(s5pc1xx_gpiolib_init);
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
new file mode 100644
index 000000000000..72ad59f61efc
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
@@ -0,0 +1,32 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
+ *
+ * Copyright 2009 Samsung Electronic
+ *
+ * S5PC1XX Platform - GPIO pin configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+#ifndef __GPIO_CFG_S5PC1XX_H
+#define __GPIO_CFG_S5PC1XX_H __FILE__
+
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
+
+#define S5P_GPIO_DRVSTR_LV1	0x00
+#define S5P_GPIO_DRVSTR_LV2	0x01
+#define S5P_GPIO_DRVSTR_LV3	0x10
+#define S5P_GPIO_DRVSTR_LV4	0x11
+
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
+
+extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
+			s5p_gpio_drvstr_t drvstr);
+
+#endif /* __GPIO_CFG_S5PC1XX_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
new file mode 100644
index 000000000000..33ad267e8477
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * External Interrupt (GPH0 ~ GPH3) control register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5PC1XX_WKUP_INT_CON0_7		(S5PC1XX_EINT_BASE + 0x0)
+#define S5PC1XX_WKUP_INT_CON8_15	(S5PC1XX_EINT_BASE + 0x4)
+#define S5PC1XX_WKUP_INT_CON16_23	(S5PC1XX_EINT_BASE + 0x8)
+#define S5PC1XX_WKUP_INT_CON24_31	(S5PC1XX_EINT_BASE + 0xC)
+#define S5PC1XX_WKUP_INT_CON(x)		(S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_FLTCON0_3	(S5PC1XX_EINT_BASE + 0x80)
+#define S5PC1XX_WKUP_INT_FLTCON4_7	(S5PC1XX_EINT_BASE + 0x84)
+#define S5PC1XX_WKUP_INT_FLTCON8_11	(S5PC1XX_EINT_BASE + 0x88)
+#define S5PC1XX_WKUP_INT_FLTCON12_15	(S5PC1XX_EINT_BASE + 0x8C)
+#define S5PC1XX_WKUP_INT_FLTCON16_19	(S5PC1XX_EINT_BASE + 0x90)
+#define S5PC1XX_WKUP_INT_FLTCON20_23	(S5PC1XX_EINT_BASE + 0x94)
+#define S5PC1XX_WKUP_INT_FLTCON24_27	(S5PC1XX_EINT_BASE + 0x98)
+#define S5PC1XX_WKUP_INT_FLTCON28_31	(S5PC1XX_EINT_BASE + 0x9C)
+#define S5PC1XX_WKUP_INT_FLTCON(x)	(S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_MASK0_7	(S5PC1XX_EINT_BASE + 0x100)
+#define S5PC1XX_WKUP_INT_MASK8_15	(S5PC1XX_EINT_BASE + 0x104)
+#define S5PC1XX_WKUP_INT_MASK16_23	(S5PC1XX_EINT_BASE + 0x108)
+#define S5PC1XX_WKUP_INT_MASK24_31	(S5PC1XX_EINT_BASE + 0x10C)
+#define S5PC1XX_WKUP_INT_MASK(x)	(S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_PEND0_7	(S5PC1XX_EINT_BASE + 0x140)
+#define S5PC1XX_WKUP_INT_PEND8_15	(S5PC1XX_EINT_BASE + 0x144)
+#define S5PC1XX_WKUP_INT_PEND16_23	(S5PC1XX_EINT_BASE + 0x148)
+#define S5PC1XX_WKUP_INT_PEND24_31	(S5PC1XX_EINT_BASE + 0x14C)
+#define S5PC1XX_WKUP_INT_PEND(x)	(S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_LOWLEV		(0x00)
+#define S5PC1XX_WKUP_INT_HILEV		(0x01)
+#define S5PC1XX_WKUP_INT_FALLEDGE	(0x02)
+#define S5PC1XX_WKUP_INT_RISEEDGE	(0x03)
+#define S5PC1XX_WKUP_INT_BOTHEDGE	(0x04)
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
index f07d8c3b25d6..ef8736366f0d 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -171,12 +171,21 @@
 #define IRQ_SDMIRQ		S5PC1XX_IRQ_VIC2(30)
 #define IRQ_SDMFIQ		S5PC1XX_IRQ_VIC2(31)
 
+/* External interrupt */
 #define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 1)
 
-#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
-#define IRQ_EINT(x)		S3C_EINT(x)
+#define S3C_EINT(x)		(S3C_IRQ_EINT_BASE + (x - 16))
+#define IRQ_EINT(x)		(x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
+#define IRQ_EINT_BIT(x)		(x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
 
-#define NR_IRQS 		(IRQ_EINT(31)+1)
+/* GPIO interrupt */
+#define S3C_IRQ_GPIO_BASE	(IRQ_EINT(31) + 1)
+#define S3C_IRQ_GPIO(x)		(S3C_IRQ_GPIO_BASE + (x))
+
+/*
+ * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
+ */
+#define NR_IRQS			(S3C_IRQ_GPIO(320) + 1)
 
 #endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
 
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
index 75c8390cb827..c5cc86e92d65 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -13,68 +13,69 @@
 #ifndef __PLAT_REGS_CLOCK_H
 #define __PLAT_REGS_CLOCK_H __FILE__
 
-#define S5PC1XX_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
-
-#define S5PC1XX_APLL_LOCK		S5PC1XX_CLKREG(0x00)
-#define S5PC1XX_MPLL_LOCK		S5PC1XX_CLKREG(0x04)
-#define S5PC1XX_EPLL_LOCK		S5PC1XX_CLKREG(0x08)
-#define S5PC100_HPLL_LOCK		S5PC1XX_CLKREG(0x0C)
-
-#define S5PC1XX_APLL_CON		S5PC1XX_CLKREG(0x100)
-#define S5PC1XX_MPLL_CON		S5PC1XX_CLKREG(0x104)
-#define S5PC1XX_EPLL_CON		S5PC1XX_CLKREG(0x108)
-#define S5PC100_HPLL_CON		S5PC1XX_CLKREG(0x10C)
-
-#define S5PC1XX_CLK_SRC0		S5PC1XX_CLKREG(0x200)
-#define S5PC1XX_CLK_SRC1		S5PC1XX_CLKREG(0x204)
-#define S5PC1XX_CLK_SRC2		S5PC1XX_CLKREG(0x208)
-#define S5PC1XX_CLK_SRC3		S5PC1XX_CLKREG(0x20C)
-
-#define S5PC1XX_CLK_DIV0		S5PC1XX_CLKREG(0x300)
-#define S5PC1XX_CLK_DIV1		S5PC1XX_CLKREG(0x304)
-#define S5PC1XX_CLK_DIV2		S5PC1XX_CLKREG(0x308)
-#define S5PC1XX_CLK_DIV3		S5PC1XX_CLKREG(0x30C)
-#define S5PC1XX_CLK_DIV4		S5PC1XX_CLKREG(0x310)
-
-#define S5PC100_CLK_OUT			S5PC1XX_CLKREG(0x400)
-
-#define S5PC100_CLKGATE_D00		S5PC1XX_CLKREG(0x500)
-#define S5PC100_CLKGATE_D01		S5PC1XX_CLKREG(0x504)
-#define S5PC100_CLKGATE_D02		S5PC1XX_CLKREG(0x508)
-
-#define S5PC100_CLKGATE_D10		S5PC1XX_CLKREG(0x520)
-#define S5PC100_CLKGATE_D11		S5PC1XX_CLKREG(0x524)
-#define S5PC100_CLKGATE_D12		S5PC1XX_CLKREG(0x528)
-#define S5PC100_CLKGATE_D13		S5PC1XX_CLKREG(0x52C)
-#define S5PC100_CLKGATE_D14		S5PC1XX_CLKREG(0x530)
-#define S5PC100_CLKGATE_D15		S5PC1XX_CLKREG(0x534)
-
-#define S5PC100_CLKGATE_D20		S5PC1XX_CLKREG(0x540)
-
-#define S5PC100_SCLKGATE0		S5PC1XX_CLKREG(0x560)
-#define S5PC100_SCLKGATE1		S5PC1XX_CLKREG(0x564)
-
-#define S5PC100_OTHERS          S5PC1XX_CLKREG(0x8200)
-
-#define S5PC1XX_EPLL_EN     (1<<31)
-#define S5PC1XX_EPLL_MASK   0xffffffff
-#define S5PC1XX_EPLLVAL(_m, _p, _s)   ((_m) << 16 | ((_p) << 8) | ((_s)))
+#define S5PC100_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
+#define S5PC100_CLKREG_OTHER(x)		(S5PC1XX_VA_CLK_OTHER + (x))
+
+/* s5pc100 register for clock */
+#define S5PC100_APLL_LOCK		S5PC100_CLKREG(0x00)
+#define S5PC100_MPLL_LOCK		S5PC100_CLKREG(0x04)
+#define S5PC100_EPLL_LOCK		S5PC100_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK		S5PC100_CLKREG(0x0C)
+
+#define S5PC100_APLL_CON		S5PC100_CLKREG(0x100)
+#define S5PC100_MPLL_CON		S5PC100_CLKREG(0x104)
+#define S5PC100_EPLL_CON		S5PC100_CLKREG(0x108)
+#define S5PC100_HPLL_CON		S5PC100_CLKREG(0x10C)
+
+#define S5PC100_CLKSRC0			S5PC100_CLKREG(0x200)
+#define S5PC100_CLKSRC1			S5PC100_CLKREG(0x204)
+#define S5PC100_CLKSRC2			S5PC100_CLKREG(0x208)
+#define S5PC100_CLKSRC3			S5PC100_CLKREG(0x20C)
+
+#define S5PC100_CLKDIV0			S5PC100_CLKREG(0x300)
+#define S5PC100_CLKDIV1			S5PC100_CLKREG(0x304)
+#define S5PC100_CLKDIV2			S5PC100_CLKREG(0x308)
+#define S5PC100_CLKDIV3			S5PC100_CLKREG(0x30C)
+#define S5PC100_CLKDIV4			S5PC100_CLKREG(0x310)
+
+#define S5PC100_CLK_OUT			S5PC100_CLKREG(0x400)
+
+#define S5PC100_CLKGATE_D00		S5PC100_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01		S5PC100_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02		S5PC100_CLKREG(0x508)
+
+#define S5PC100_CLKGATE_D10		S5PC100_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11		S5PC100_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12		S5PC100_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13		S5PC100_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14		S5PC100_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15		S5PC100_CLKREG(0x534)
+
+#define S5PC100_CLKGATE_D20		S5PC100_CLKREG(0x540)
+
+#define S5PC100_SCLKGATE0		S5PC100_CLKREG(0x560)
+#define S5PC100_SCLKGATE1		S5PC100_CLKREG(0x564)
+
+/* EPLL_CON */
+#define S5PC100_EPLL_EN			(1<<31)
+#define S5PC100_EPLL_MASK		0xffffffff
+#define S5PC100_EPLLVAL(_m, _p, _s)	((_m) << 16 | ((_p) << 8) | ((_s)))
 
 /* CLKSRC0 */
-#define S5PC1XX_CLKSRC0_APLL_MASK		(0x1<<0)
-#define S5PC1XX_CLKSRC0_APLL_SHIFT		(0)
-#define S5PC1XX_CLKSRC0_MPLL_MASK		(0x1<<4)
-#define S5PC1XX_CLKSRC0_MPLL_SHIFT		(4)
-#define S5PC1XX_CLKSRC0_EPLL_MASK		(0x1<<8)
-#define S5PC1XX_CLKSRC0_EPLL_SHIFT		(8)
+#define S5PC100_CLKSRC0_APLL_MASK		(0x1<<0)
+#define S5PC100_CLKSRC0_APLL_SHIFT		(0)
+#define S5PC100_CLKSRC0_MPLL_MASK		(0x1<<4)
+#define S5PC100_CLKSRC0_MPLL_SHIFT		(4)
+#define S5PC100_CLKSRC0_EPLL_MASK		(0x1<<8)
+#define S5PC100_CLKSRC0_EPLL_SHIFT		(8)
 #define S5PC100_CLKSRC0_HPLL_MASK		(0x1<<12)
 #define S5PC100_CLKSRC0_HPLL_SHIFT		(12)
 #define S5PC100_CLKSRC0_AMMUX_MASK		(0x1<<16)
 #define S5PC100_CLKSRC0_AMMUX_SHIFT		(16)
 #define S5PC100_CLKSRC0_HREF_MASK		(0x1<<20)
 #define S5PC100_CLKSRC0_HREF_SHIFT		(20)
-#define S5PC1XX_CLKSRC0_ONENAND_MASK	(0x1<<24)
-#define S5PC1XX_CLKSRC0_ONENAND_SHIFT	(24)
+#define S5PC100_CLKSRC0_ONENAND_MASK	(0x1<<24)
+#define S5PC100_CLKSRC0_ONENAND_SHIFT	(24)
 
 
 /* CLKSRC1 */
@@ -127,10 +128,9 @@
 #define S5PC100_CLKSRC3_SPDIF_MASK		(0x3<<24)
 #define S5PC100_CLKSRC3_SPDIF_SHIFT		(24)
 
-
 /* CLKDIV0 */
-#define S5PC1XX_CLKDIV0_APLL_MASK		(0x1<<0)
-#define S5PC1XX_CLKDIV0_APLL_SHIFT		(0)
+#define S5PC100_CLKDIV0_APLL_MASK		(0x1<<0)
+#define S5PC100_CLKDIV0_APLL_SHIFT		(0)
 #define S5PC100_CLKDIV0_ARM_MASK		(0x7<<4)
 #define S5PC100_CLKDIV0_ARM_SHIFT		(4)
 #define S5PC100_CLKDIV0_D0_MASK		(0x7<<8)
@@ -141,8 +141,8 @@
 #define S5PC100_CLKDIV0_SECSS_SHIFT		(16)
 
 /* CLKDIV1 */
-#define S5PC100_CLKDIV1_AM_MASK		(0x7<<0)
-#define S5PC100_CLKDIV1_AM_SHIFT		(0)
+#define S5PC100_CLKDIV1_APLL2_MASK		(0x7<<0)
+#define S5PC100_CLKDIV1_APLL2_SHIFT		(0)
 #define S5PC100_CLKDIV1_MPLL_MASK		(0x3<<4)
 #define S5PC100_CLKDIV1_MPLL_SHIFT		(4)
 #define S5PC100_CLKDIV1_MPLL2_MASK		(0x1<<8)
@@ -202,7 +202,6 @@
 #define S5PC100_CLKDIV4_AUDIO2_MASK		(0xf<<20)
 #define S5PC100_CLKDIV4_AUDIO2_SHIFT	(20)
 
-
 /* HCLKD0/PCLKD0 Clock Gate 0 Registers */
 #define S5PC100_CLKGATE_D00_INTC		(1<<0)
 #define S5PC100_CLKGATE_D00_TZIC		(1<<1)
@@ -295,8 +294,8 @@
 #define S5PC100_CLKGATE_D20_I2SD2		(1<<1)
 
 /* Special Clock Gate 0 Registers */
-#define	S5PC1XX_CLKGATE_SCLK0_HPM		(1<<0)
-#define	S5PC1XX_CLKGATE_SCLK0_PWI		(1<<1)
+#define	S5PC100_CLKGATE_SCLK0_HPM		(1<<0)
+#define	S5PC100_CLKGATE_SCLK0_PWI		(1<<1)
 #define	S5PC100_CLKGATE_SCLK0_ONENAND	(1<<2)
 #define	S5PC100_CLKGATE_SCLK0_UART		(1<<3)
 #define	S5PC100_CLKGATE_SCLK0_SPI0		(1<<4)
@@ -329,89 +328,28 @@
 #define	S5PC100_CLKGATE_SCLK1_SPDIF		(1<<11)
 #define	S5PC100_CLKGATE_SCLK1_CAM		(1<<12)
 
-/* register for power management */
-#define S5PC100_PWR_CFG 		S5PC1XX_CLKREG(0x8000)
-#define S5PC100_EINT_WAKEUP_MASK 	S5PC1XX_CLKREG(0x8004)
-#define S5PC100_NORMAL_CFG 		S5PC1XX_CLKREG(0x8010)
-#define S5PC100_STOP_CFG 		S5PC1XX_CLKREG(0x8014)
-#define S5PC100_SLEEP_CFG 		S5PC1XX_CLKREG(0x8018)
-#define S5PC100_STOP_MEM_CFG 	S5PC1XX_CLKREG(0x801C)
-#define S5PC100_OSC_FREQ 		S5PC1XX_CLKREG(0x8100)
-#define S5PC100_OSC_STABLE 		S5PC1XX_CLKREG(0x8104)
-#define S5PC100_PWR_STABLE 		S5PC1XX_CLKREG(0x8108)
-#define S5PC100_MTC_STABLE 		S5PC1XX_CLKREG(0x8110)
-#define S5PC100_CLAMP_STABLE 	S5PC1XX_CLKREG(0x8114)
-#define S5PC100_OTHERS 		S5PC1XX_CLKREG(0x8200)
-#define S5PC100_RST_STAT 		S5PC1XX_CLKREG(0x8300)
-#define S5PC100_WAKEUP_STAT 	S5PC1XX_CLKREG(0x8304)
-#define S5PC100_BLK_PWR_STAT 	S5PC1XX_CLKREG(0x8308)
-#define S5PC100_INFORM0 		S5PC1XX_CLKREG(0x8400)
-#define S5PC100_INFORM1 		S5PC1XX_CLKREG(0x8404)
-#define S5PC100_INFORM2 		S5PC1XX_CLKREG(0x8408)
-#define S5PC100_INFORM3 		S5PC1XX_CLKREG(0x840C)
-#define S5PC100_INFORM4 		S5PC1XX_CLKREG(0x8410)
-#define S5PC100_INFORM5 		S5PC1XX_CLKREG(0x8414)
-#define S5PC100_INFORM6 		S5PC1XX_CLKREG(0x8418)
-#define S5PC100_INFORM7 		S5PC1XX_CLKREG(0x841C)
-#define S5PC100_DCGIDX_MAP0 	S5PC1XX_CLKREG(0x8500)
-#define S5PC100_DCGIDX_MAP1 	S5PC1XX_CLKREG(0x8504)
-#define S5PC100_DCGIDX_MAP2 	S5PC1XX_CLKREG(0x8508)
-#define S5PC100_DCGPERF_MAP0 	S5PC1XX_CLKREG(0x850C)
-#define S5PC100_DCGPERF_MAP1 	S5PC1XX_CLKREG(0x8510)
-#define S5PC100_DVCIDX_MAP 		S5PC1XX_CLKREG(0x8514)
-#define S5PC100_FREQ_CPU 		S5PC1XX_CLKREG(0x8518)
-#define S5PC100_FREQ_DPM 		S5PC1XX_CLKREG(0x851C)
-#define S5PC100_DVSEMCLK_EN 	S5PC1XX_CLKREG(0x8520)
-#define S5PC100_APLL_CON_L8 	S5PC1XX_CLKREG(0x8600)
-#define S5PC100_APLL_CON_L7 	S5PC1XX_CLKREG(0x8604)
-#define S5PC100_APLL_CON_L6 	S5PC1XX_CLKREG(0x8608)
-#define S5PC100_APLL_CON_L5 	S5PC1XX_CLKREG(0x860C)
-#define S5PC100_APLL_CON_L4 	S5PC1XX_CLKREG(0x8610)
-#define S5PC100_APLL_CON_L3 	S5PC1XX_CLKREG(0x8614)
-#define S5PC100_APLL_CON_L2 	S5PC1XX_CLKREG(0x8618)
-#define S5PC100_APLL_CON_L1 	S5PC1XX_CLKREG(0x861C)
-#define S5PC100_IEM_CONTROL 	S5PC1XX_CLKREG(0x8620)
-#define S5PC100_CLKDIV_IEM_L8 	S5PC1XX_CLKREG(0x8700)
-#define S5PC100_CLKDIV_IEM_L7 	S5PC1XX_CLKREG(0x8704)
-#define S5PC100_CLKDIV_IEM_L6 	S5PC1XX_CLKREG(0x8708)
-#define S5PC100_CLKDIV_IEM_L5 	S5PC1XX_CLKREG(0x870C)
-#define S5PC100_CLKDIV_IEM_L4 	S5PC1XX_CLKREG(0x8710)
-#define S5PC100_CLKDIV_IEM_L3 	S5PC1XX_CLKREG(0x8714)
-#define S5PC100_CLKDIV_IEM_L2 	S5PC1XX_CLKREG(0x8718)
-#define S5PC100_CLKDIV_IEM_L1 	S5PC1XX_CLKREG(0x871C)
-#define S5PC100_IEM_HPMCLK_DIV 	S5PC1XX_CLKREG(0x8724)
-
-#define S5PC100_SWRESET		S5PC1XX_CLKREG(0x100000)
-#define S5PC100_OND_SWRESET		S5PC1XX_CLKREG(0x100008)
-#define S5PC100_GEN_CTRL		S5PC1XX_CLKREG(0x100100)
-#define S5PC100_GEN_STATUS		S5PC1XX_CLKREG(0x100104)
-#define S5PC100_MEM_SYS_CFG		S5PC1XX_CLKREG(0x100200)
-#define S5PC100_CAM_MUX_SEL		S5PC1XX_CLKREG(0x100300)
-#define S5PC100_MIXER_OUT_SEL	S5PC1XX_CLKREG(0x100304)
-#define S5PC100_LPMP_MODE_SEL	S5PC1XX_CLKREG(0x100308)
-#define S5PC100_MIPI_PHY_CON0	S5PC1XX_CLKREG(0x100400)
-#define S5PC100_MIPI_PHY_CON1	S5PC1XX_CLKREG(0x100414)
-#define S5PC100_HDMI_PHY_CON0	S5PC1XX_CLKREG(0x100420)
-
-#define S5PC100_CFG_WFI_CLEAN	(~(3<<5))
-#define S5PC100_CFG_WFI_IDLE	(1<<5)
-#define S5PC100_CFG_WFI_STOP	(2<<5)
-#define S5PC100_CFG_WFI_SLEEP	(3<<5)
-
+#define S5PC100_SWRESET		S5PC100_CLKREG_OTHER(0x000)
+#define S5PC100_OND_SWRESET	S5PC100_CLKREG_OTHER(0x008)
+#define S5PC100_GEN_CTRL	S5PC100_CLKREG_OTHER(0x100)
+#define S5PC100_GEN_STATUS	S5PC100_CLKREG_OTHER(0x104)
+#define S5PC100_MEM_SYS_CFG	S5PC100_CLKREG_OTHER(0x200)
+#define S5PC100_CAM_MUX_SEL	S5PC100_CLKREG_OTHER(0x300)
+#define S5PC100_MIXER_OUT_SEL	S5PC100_CLKREG_OTHER(0x304)
+#define S5PC100_LPMP_MODE_SEL	S5PC100_CLKREG_OTHER(0x308)
+#define S5PC100_MIPI_PHY_CON0	S5PC100_CLKREG_OTHER(0x400)
+#define S5PC100_MIPI_PHY_CON1	S5PC100_CLKREG_OTHER(0x414)
+#define S5PC100_HDMI_PHY_CON0	S5PC100_CLKREG_OTHER(0x420)
+
+#define S5PC100_SWRESET_RESETVAL	0xc100
 #define S5PC100_OTHER_SYS_INT	24
 #define S5PC100_OTHER_STA_TYPE	23
 #define STA_TYPE_EXPON		0
 #define STA_TYPE_SFR		1
 
-#define S5PC100_PWR_STA_EXP_SCALE	0
-#define S5PC100_PWR_STA_CNT		4
-
-#define S5PC100_PWR_STABLE_COUNT	85500
-
 #define S5PC100_SLEEP_CFG_OSC_EN	0
 
 /* OTHERS Resgister */
-#define S5PC100_OTHERS_USB_SIG_MASK 	(1 << 16)
+#define S5PC100_OTHERS_USB_SIG_MASK	(1 << 16)
 #define S5PC100_OTHERS_MIPI_DPHY_EN		(1 << 28)
 
 /* MIPI D-PHY Control Register 0 */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
new file mode 100644
index 000000000000..43c7bc8bf784
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_REGS_GPIO_H
+#define __ASM_PLAT_S5PC1XX_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* S5PC100 */
+#define S5PC100_GPIO_BASE	S5PC1XX_VA_GPIO
+#define S5PC100_GPA0_BASE	(S5PC100_GPIO_BASE + 0x0000)
+#define S5PC100_GPA1_BASE	(S5PC100_GPIO_BASE + 0x0020)
+#define S5PC100_GPB_BASE	(S5PC100_GPIO_BASE + 0x0040)
+#define S5PC100_GPC_BASE	(S5PC100_GPIO_BASE + 0x0060)
+#define S5PC100_GPD_BASE	(S5PC100_GPIO_BASE + 0x0080)
+#define S5PC100_GPE0_BASE	(S5PC100_GPIO_BASE + 0x00A0)
+#define S5PC100_GPE1_BASE	(S5PC100_GPIO_BASE + 0x00C0)
+#define S5PC100_GPF0_BASE	(S5PC100_GPIO_BASE + 0x00E0)
+#define S5PC100_GPF1_BASE	(S5PC100_GPIO_BASE + 0x0100)
+#define S5PC100_GPF2_BASE	(S5PC100_GPIO_BASE + 0x0120)
+#define S5PC100_GPF3_BASE	(S5PC100_GPIO_BASE + 0x0140)
+#define S5PC100_GPG0_BASE	(S5PC100_GPIO_BASE + 0x0160)
+#define S5PC100_GPG1_BASE	(S5PC100_GPIO_BASE + 0x0180)
+#define S5PC100_GPG2_BASE	(S5PC100_GPIO_BASE + 0x01A0)
+#define S5PC100_GPG3_BASE	(S5PC100_GPIO_BASE + 0x01C0)
+#define S5PC100_GPH0_BASE	(S5PC100_GPIO_BASE + 0x0C00)
+#define S5PC100_GPH1_BASE	(S5PC100_GPIO_BASE + 0x0C20)
+#define S5PC100_GPH2_BASE	(S5PC100_GPIO_BASE + 0x0C40)
+#define S5PC100_GPH3_BASE	(S5PC100_GPIO_BASE + 0x0C60)
+#define S5PC100_GPI_BASE	(S5PC100_GPIO_BASE + 0x01E0)
+#define S5PC100_GPJ0_BASE	(S5PC100_GPIO_BASE + 0x0200)
+#define S5PC100_GPJ1_BASE	(S5PC100_GPIO_BASE + 0x0220)
+#define S5PC100_GPJ2_BASE	(S5PC100_GPIO_BASE + 0x0240)
+#define S5PC100_GPJ3_BASE	(S5PC100_GPIO_BASE + 0x0260)
+#define S5PC100_GPJ4_BASE	(S5PC100_GPIO_BASE + 0x0280)
+#define S5PC100_GPK0_BASE	(S5PC100_GPIO_BASE + 0x02A0)
+#define S5PC100_GPK1_BASE	(S5PC100_GPIO_BASE + 0x02C0)
+#define S5PC100_GPK2_BASE	(S5PC100_GPIO_BASE + 0x02E0)
+#define S5PC100_GPK3_BASE	(S5PC100_GPIO_BASE + 0x0300)
+#define S5PC100_GPL0_BASE	(S5PC100_GPIO_BASE + 0x0320)
+#define S5PC100_GPL1_BASE	(S5PC100_GPIO_BASE + 0x0340)
+#define S5PC100_GPL2_BASE	(S5PC100_GPIO_BASE + 0x0360)
+#define S5PC100_GPL3_BASE	(S5PC100_GPIO_BASE + 0x0380)
+#define S5PC100_GPL4_BASE	(S5PC100_GPIO_BASE + 0x03A0)
+#define S5PC100_EINT_BASE	(S5PC100_GPIO_BASE + 0x0E00)
+
+#define S5PC100_UHOST		(S5PC100_GPIO_BASE + 0x0B68)
+#define S5PC100_PDNEN		(S5PC100_GPIO_BASE + 0x0F80)
+
+/* PDNEN */
+#define S5PC100_PDNEN_CFG_PDNEN	(1 << 1)
+#define S5PC100_PDNEN_CFG_AUTO	(0 << 1)
+#define S5PC100_PDNEN_POWERDOWN	(1 << 0)
+#define S5PC100_PDNEN_NORMAL	(0 << 0)
+
+/* Common part */
+/* External interrupt base is same at both s5pc100 and s5pc110 */
+#define S5PC1XX_EINT_BASE	(S5PC100_EINT_BASE)
+
+#define S5PC100_GPx_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S5PC100_GPx_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+#define S5PC100_GPx_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+
+#endif /* __ASM_PLAT_S5PC1XX_REGS_GPIO_H */
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
new file mode 100644
index 000000000000..02ffa491b53a
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
@@ -0,0 +1,84 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Jongse Won <jongse.won@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_REGS_PWR
+#define __ASM_ARM_REGS_PWR __FILE__
+
+#define S5PC1XX_PWRREG(x)			(S5PC1XX_VA_PWR + (x))
+
+/* s5pc100 (0xE0108000) register for power management */
+#define S5PC100_PWR_CFG				S5PC1XX_PWRREG(0x0)
+#define S5PC100_EINT_WAKEUP_MASK		S5PC1XX_PWRREG(0x4)
+#define S5PC100_NORMAL_CFG			S5PC1XX_PWRREG(0x10)
+#define S5PC100_STOP_CFG			S5PC1XX_PWRREG(0x14)
+#define S5PC100_SLEEP_CFG			S5PC1XX_PWRREG(0x18)
+#define S5PC100_STOP_MEM_CFG			S5PC1XX_PWRREG(0x1C)
+#define S5PC100_OSC_FREQ			S5PC1XX_PWRREG(0x100)
+#define S5PC100_OSC_STABLE			S5PC1XX_PWRREG(0x104)
+#define S5PC100_PWR_STABLE			S5PC1XX_PWRREG(0x108)
+#define S5PC100_MTC_STABLE			S5PC1XX_PWRREG(0x110)
+#define S5PC100_CLAMP_STABLE			S5PC1XX_PWRREG(0x114)
+#define S5PC100_OTHERS				S5PC1XX_PWRREG(0x200)
+#define S5PC100_RST_STAT			S5PC1XX_PWRREG(0x300)
+#define S5PC100_WAKEUP_STAT			S5PC1XX_PWRREG(0x304)
+#define S5PC100_BLK_PWR_STAT			S5PC1XX_PWRREG(0x308)
+#define S5PC100_INFORM0				S5PC1XX_PWRREG(0x400)
+#define S5PC100_INFORM1				S5PC1XX_PWRREG(0x404)
+#define S5PC100_INFORM2				S5PC1XX_PWRREG(0x408)
+#define S5PC100_INFORM3				S5PC1XX_PWRREG(0x40C)
+#define S5PC100_INFORM4				S5PC1XX_PWRREG(0x410)
+#define S5PC100_INFORM5				S5PC1XX_PWRREG(0x414)
+#define S5PC100_INFORM6				S5PC1XX_PWRREG(0x418)
+#define S5PC100_INFORM7				S5PC1XX_PWRREG(0x41C)
+#define S5PC100_DCGIDX_MAP0			S5PC1XX_PWRREG(0x500)
+#define S5PC100_DCGIDX_MAP1			S5PC1XX_PWRREG(0x504)
+#define S5PC100_DCGIDX_MAP2			S5PC1XX_PWRREG(0x508)
+#define S5PC100_DCGPERF_MAP0			S5PC1XX_PWRREG(0x50C)
+#define S5PC100_DCGPERF_MAP1			S5PC1XX_PWRREG(0x510)
+#define S5PC100_DVCIDX_MAP			S5PC1XX_PWRREG(0x514)
+#define S5PC100_FREQ_CPU			S5PC1XX_PWRREG(0x518)
+#define S5PC100_FREQ_DPM			S5PC1XX_PWRREG(0x51C)
+#define S5PC100_DVSEMCLK_EN			S5PC1XX_PWRREG(0x520)
+#define S5PC100_APLL_CON_L8			S5PC1XX_PWRREG(0x600)
+#define S5PC100_APLL_CON_L7			S5PC1XX_PWRREG(0x604)
+#define S5PC100_APLL_CON_L6			S5PC1XX_PWRREG(0x608)
+#define S5PC100_APLL_CON_L5			S5PC1XX_PWRREG(0x60C)
+#define S5PC100_APLL_CON_L4			S5PC1XX_PWRREG(0x610)
+#define S5PC100_APLL_CON_L3			S5PC1XX_PWRREG(0x614)
+#define S5PC100_APLL_CON_L2			S5PC1XX_PWRREG(0x618)
+#define S5PC100_APLL_CON_L1			S5PC1XX_PWRREG(0x61C)
+#define S5PC100_IEM_CONTROL			S5PC1XX_PWRREG(0x620)
+#define S5PC100_CLKDIV_IEM_L8			S5PC1XX_PWRREG(0x700)
+#define S5PC100_CLKDIV_IEM_L7			S5PC1XX_PWRREG(0x704)
+#define S5PC100_CLKDIV_IEM_L6			S5PC1XX_PWRREG(0x708)
+#define S5PC100_CLKDIV_IEM_L5			S5PC1XX_PWRREG(0x70C)
+#define S5PC100_CLKDIV_IEM_L4			S5PC1XX_PWRREG(0x710)
+#define S5PC100_CLKDIV_IEM_L3			S5PC1XX_PWRREG(0x714)
+#define S5PC100_CLKDIV_IEM_L2			S5PC1XX_PWRREG(0x718)
+#define S5PC100_CLKDIV_IEM_L1			S5PC1XX_PWRREG(0x71C)
+#define S5PC100_IEM_HPMCLK_DIV			S5PC1XX_PWRREG(0x724)
+
+/* PWR_CFG */
+#define S5PC100_PWRCFG_CFG_DEEP_IDLE		(1 << 31)
+#define S5PC100_PWRCFG_CFG_WFI_MASK		(3 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_IDLE		(0 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE	(1 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_STOP		(2 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_SLEEP		(3 << 5)
+
+/* SLEEP_CFG */
+#define S5PC100_SLEEP_OSC_EN_SLEEP		(1 << 0)
+
+/* OTHERS */
+#define S5PC100_PMU_INT_DISABLE			(1 << 24)
+
+#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
index 45e275131665..2531f34a56f3 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -35,10 +35,9 @@ extern struct clk clk_hpll;
 extern struct clk clk_hd0;
 extern struct clk clk_pd0;
 extern struct clk clk_54m;
-extern struct clk clk_dout_mpll2;
 extern void s5pc1xx_register_clocks(void);
-extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
-extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
 
 /* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
 extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c
new file mode 100644
index 000000000000..373122f57d56
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq-eint.c
@@ -0,0 +1,281 @@
+/*
+ * linux/arch/arm/plat-s5pc1xx/irq-eint.c
+ *
+ *  Copyright 2009 Samsung Electronics Co.
+ *  Byungho Min <bhmin@samsung.com>
+ *  Kyungin Park <kyungmin.park@samsung.com>
+ *
+ * Based on plat-s3c64xx/irq-eint.c
+ *
+ * S5PC1XX - Interrupt handling for IRQ_EINT(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/pm.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-ext.h>
+#include <plat/pm.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-irqtype.h>
+
+/*
+ * bank is a group of external interrupt
+ * bank0 means EINT0 ... EINT7
+ * bank1 means EINT8 ... EINT15
+ * bank2 means EINT16 ... EINT23
+ * bank3 means EINT24 ... EINT31
+ */
+
+static inline int s3c_get_eint(unsigned int irq)
+{
+	int real;
+
+	if (irq < IRQ_EINT16_31)
+		real = (irq - IRQ_EINT0);
+	else
+		real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
+
+	return real;
+}
+
+static inline int s3c_get_bank(unsigned int irq)
+{
+	return s3c_get_eint(irq) >> 3;
+}
+
+static inline int s3c_eint_to_bit(unsigned int irq)
+{
+	int real, bit;
+
+	real = s3c_get_eint(irq);
+	bit = 1 << (real & (8 - 1));
+
+	return bit;
+}
+
+static inline void s3c_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+	u32 bank = s3c_get_bank(irq);
+
+	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
+	mask |= s3c_eint_to_bit(irq);
+	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
+}
+
+static void s3c_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+	u32 bank = s3c_get_bank(irq);
+
+	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
+	mask &= ~(s3c_eint_to_bit(irq));
+	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
+}
+
+static inline void s3c_irq_eint_ack(unsigned int irq)
+{
+	u32 bank = s3c_get_bank(irq);
+
+	__raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
+}
+
+static void s3c_irq_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s3c_irq_eint_mask(irq);
+	s3c_irq_eint_ack(irq);
+}
+
+static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	u32 bank = s3c_get_bank(irq);
+	int real = s3c_get_eint(irq);
+	int gpio, shift, sfn;
+	u32 ctrl, con = 0;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		con = S5PC1XX_WKUP_INT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		con = S5PC1XX_WKUP_INT_FALLEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		con = S5PC1XX_WKUP_INT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		con = S5PC1XX_WKUP_INT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		con = S5PC1XX_WKUP_INT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	gpio = real & (8 - 1);
+	shift = gpio << 2;
+
+	ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
+	ctrl &= ~(0x7 << shift);
+	ctrl |= con << shift;
+	__raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
+
+	switch (real) {
+	case 0 ... 7:
+			gpio = S5PC100_GPH0(gpio);
+		break;
+	case 8 ... 15:
+			gpio = S5PC100_GPH1(gpio);
+		break;
+	case 16 ... 23:
+			gpio = S5PC100_GPH2(gpio);
+		break;
+	case 24 ... 31:
+			gpio = S5PC100_GPH3(gpio);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sfn = S3C_GPIO_SFN(0x2);
+	s3c_gpio_cfgpin(gpio, sfn);
+
+	return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+	.name		= "EINT",
+	.mask		= s3c_irq_eint_mask,
+	.unmask		= s3c_irq_eint_unmask,
+	.mask_ack	= s3c_irq_eint_maskack,
+	.ack		= s3c_irq_eint_ack,
+	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from external interrupts,
+ * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
+	u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
+	unsigned int irq;
+
+	status &= ~mask;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+
+		status >>= 1;
+	}
+}
+
+static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(16, 23);
+	s3c_irq_demux_eint(24, 31);
+}
+
+/*
+ * Handle EINT0 ... EINT15 at VIC directly
+ */
+static void s3c_irq_vic_eint_mask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	unsigned int real;
+
+	s3c_irq_eint_mask(irq);
+	real = s3c_get_eint(irq);
+	writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void s3c_irq_vic_eint_unmask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	unsigned int real;
+
+	s3c_irq_eint_unmask(irq);
+	real = s3c_get_eint(irq);
+	writel(1 << real, base + VIC_INT_ENABLE);
+}
+
+static inline void s3c_irq_vic_eint_ack(unsigned int irq)
+{
+	u32 bit;
+	u32 bank = s3c_get_bank(irq);
+
+	bit = s3c_eint_to_bit(irq);
+	__raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
+}
+
+static void s3c_irq_vic_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s3c_irq_vic_eint_mask(irq);
+	s3c_irq_vic_eint_ack(irq);
+}
+
+static struct irq_chip s3c_irq_vic_eint = {
+	.name		= "EINT",
+	.mask		= s3c_irq_vic_eint_mask,
+	.unmask		= s3c_irq_vic_eint_unmask,
+	.mask_ack	= s3c_irq_vic_eint_maskack,
+	.ack		= s3c_irq_vic_eint_ack,
+	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
+};
+
+static int __init s5pc1xx_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
+		set_irq_chip(irq, &s3c_irq_vic_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+		set_irq_chip(irq, &s3c_irq_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
+
+	return 0;
+}
+
+arch_initcall(s5pc1xx_init_irq_eint);
diff --git a/arch/arm/plat-s5pc1xx/irq-gpio.c b/arch/arm/plat-s5pc1xx/irq-gpio.c
new file mode 100644
index 000000000000..fecca7a679b0
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq-gpio.c
@@ -0,0 +1,266 @@
+/*
+ * arch/arm/plat-s5pc1xx/irq-gpio.c
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ *
+ * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <plat/gpio-cfg.h>
+
+#define S5PC1XX_GPIOREG(x)		(S5PC1XX_VA_GPIO + (x))
+
+#define CON_OFFSET			0x700
+#define MASK_OFFSET			0x900
+#define PEND_OFFSET			0xA00
+#define CON_OFFSET_2			0xE00
+#define MASK_OFFSET_2			0xF00
+#define PEND_OFFSET_2			0xF40
+
+#define GPIOINT_LEVEL_LOW		0x0
+#define GPIOINT_LEVEL_HIGH		0x1
+#define GPIOINT_EDGE_FALLING		0x2
+#define GPIOINT_EDGE_RISING		0x3
+#define GPIOINT_EDGE_BOTH		0x4
+
+static int group_to_con_offset(int group)
+{
+	return group << 2;
+}
+
+static int group_to_mask_offset(int group)
+{
+	return group << 2;
+}
+
+static int group_to_pend_offset(int group)
+{
+	return group << 2;
+}
+
+static int s5pc1xx_get_start(unsigned int group)
+{
+	switch (group) {
+	case 0: return S5PC100_GPIO_A0_START;
+	case 1: return S5PC100_GPIO_A1_START;
+	case 2: return S5PC100_GPIO_B_START;
+	case 3: return S5PC100_GPIO_C_START;
+	case 4: return S5PC100_GPIO_D_START;
+	case 5: return S5PC100_GPIO_E0_START;
+	case 6: return S5PC100_GPIO_E1_START;
+	case 7: return S5PC100_GPIO_F0_START;
+	case 8: return S5PC100_GPIO_F1_START;
+	case 9: return S5PC100_GPIO_F2_START;
+	case 10: return S5PC100_GPIO_F3_START;
+	case 11: return S5PC100_GPIO_G0_START;
+	case 12: return S5PC100_GPIO_G1_START;
+	case 13: return S5PC100_GPIO_G2_START;
+	case 14: return S5PC100_GPIO_G3_START;
+	case 15: return S5PC100_GPIO_I_START;
+	case 16: return S5PC100_GPIO_J0_START;
+	case 17: return S5PC100_GPIO_J1_START;
+	case 18: return S5PC100_GPIO_J2_START;
+	case 19: return S5PC100_GPIO_J3_START;
+	case 20: return S5PC100_GPIO_J4_START;
+	default:
+		BUG();
+	}
+
+	return -EINVAL;
+}
+
+static int s5pc1xx_get_group(unsigned int irq)
+{
+	irq -= S3C_IRQ_GPIO(0);
+
+	switch (irq) {
+	case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
+		return 0;
+	case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
+		return 1;
+	case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
+		return 2;
+	case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
+		return 3;
+	case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
+		return 4;
+	case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
+		return 5;
+	case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
+		return 6;
+	case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
+		return 7;
+	case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
+		return 8;
+	case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
+		return 9;
+	case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
+		return 10;
+	case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
+		return 11;
+	case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
+		return 12;
+	case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
+		return 13;
+	case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
+		return 14;
+	case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
+		return 15;
+	case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
+		return 16;
+	case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
+		return 17;
+	case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
+		return 18;
+	case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
+		return 19;
+	case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
+		return 20;
+	default:
+		BUG();
+	}
+
+	return -EINVAL;
+}
+
+static int s5pc1xx_get_offset(unsigned int irq)
+{
+	struct gpio_chip *chip = get_irq_data(irq);
+	return irq - S3C_IRQ_GPIO(chip->base);
+}
+
+static void s5pc1xx_gpioint_ack(unsigned int irq)
+{
+	int group, offset, pend_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	pend_offset = group_to_pend_offset(group);
+
+	value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+}
+
+static void s5pc1xx_gpioint_mask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	mask_offset = group_to_mask_offset(group);
+
+	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc1xx_gpioint_unmask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	mask_offset = group_to_mask_offset(group);
+
+	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+	value &= ~(1 << offset);
+	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc1xx_gpioint_mask_ack(unsigned int irq)
+{
+	s5pc1xx_gpioint_mask(irq);
+	s5pc1xx_gpioint_ack(irq);
+}
+
+static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type)
+{
+	int group, offset, con_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	con_offset = group_to_con_offset(group);
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No irq type\n");
+		return -EINVAL;
+	case IRQ_TYPE_EDGE_RISING:
+		type = GPIOINT_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		type = GPIOINT_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		type = GPIOINT_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		type = GPIOINT_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		type = GPIOINT_LEVEL_LOW;
+		break;
+	default:
+		BUG();
+	}
+
+
+	value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+	value &= ~(0xf << (offset * 0x4));
+	value |= (type << (offset * 0x4));
+	__raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+
+	return 0;
+}
+
+struct irq_chip s5pc1xx_gpioint = {
+	.name		= "GPIO",
+	.ack		= s5pc1xx_gpioint_ack,
+	.mask		= s5pc1xx_gpioint_mask,
+	.mask_ack	= s5pc1xx_gpioint_mask_ack,
+	.unmask		= s5pc1xx_gpioint_unmask,
+	.set_type	= s5pc1xx_gpioint_set_type,
+};
+
+void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int group, offset, pend_offset, mask_offset;
+	int real_irq, group_end;
+	unsigned int pend, mask;
+
+	group_end = 21;
+
+	for (group = 0; group < group_end; group++) {
+		pend_offset = group_to_pend_offset(group);
+		pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+		if (!pend)
+			continue;
+
+		mask_offset = group_to_mask_offset(group);
+		mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+		pend &= ~mask;
+
+		for (offset = 0; offset < 8; offset++) {
+			if (pend & (1 << offset)) {
+				real_irq = s5pc1xx_get_start(group) + offset;
+				generic_handle_irq(S3C_IRQ_GPIO(real_irq));
+			}
+		}
+	}
+}
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
index 80d6dd942cb8..e44fd04ef333 100644
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -79,7 +79,7 @@ static void s3c_irq_timer_ack(unsigned int irq)
 {
 	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
 
-	reg &= 0x1f;
+	reg &= 0x1f;  /* mask out pending interrupts */
 	reg |= (1 << 5) << (irq - IRQ_TIMER0);
 	__raw_writel(reg, S3C64XX_TINT_CSTAT);
 }
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
index 6b24035172fa..b436d44510c8 100644
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -49,6 +49,7 @@ static struct clk clk_ext_xtal_mux = {
 #define clk_fin_hpll clk_ext_xtal_mux
 
 #define clk_fout_mpll	clk_mpll
+#define clk_vclk_54m	clk_54m
 
 struct clk_sources {
 	unsigned int	nr_sources;
@@ -67,746 +68,327 @@ struct clksrc_clk {
 	void __iomem		*reg_source;
 };
 
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 1;
-}
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
+/* APLL */
+static struct clk clk_fout_apll = {
+	.name		= "fout_apll",
 	.id		= -1,
 	.rate		= 27000000,
 };
 
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
 
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC0_APLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_APLL_MASK,
+	.sources	= &clk_src_apll,
+	.reg_source	= S5PC100_CLKSRC0,
+};
 
-	val = __raw_readl(S5PC1XX_CLK_SRC1);
-	if (enable)
-		val |= S5PC100_CLKSRC1_CLK48M_MASK;
-	else
-		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
 
-	__raw_writel(val, S5PC1XX_CLK_SRC1);
-	local_irq_restore(flags);
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
+	ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
 
-	return 0;
+	return rate / (ratio + 1);
 }
 
-struct clk clk_48m = {
-	.name		= "clk_48m",
+static struct clk clk_dout_apll = {
+	.name		= "dout_apll",
 	.id		= -1,
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
+	.parent		= &clk_mout_apll.clk,
+	.get_rate	= s5pc100_clk_dout_apll_get_rate,
 };
 
-struct clk clk_54m = {
-	.name		= "clk_54m",
-	.id		= -1,
-	.rate		= 54000000,
-};
-
-struct clk clk_hpll = {
-	.name		= "hpll",
-	.id		= -1,
-};
+static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
 
-struct clk clk_hd0 = {
-	.name		= "hclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
+	ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
 
-struct clk clk_pd0 = {
-	.name		= "pclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
+	return rate / (ratio + 1);
+}
 
-static int s5pc1xx_clk_gate(void __iomem *reg,
-				struct clk *clk,
-				int enable)
+static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
+						unsigned long rate)
 {
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
 
-	con = __raw_readl(reg);
+	if (parent < rate)
+		return rate;
 
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
+	div = (parent / rate) - 1;
+	if (div > S5PC100_CLKDIV0_ARM_MASK)
+		div = S5PC100_CLKDIV0_ARM_MASK;
 
-	__raw_writel(con, reg);
-	return 0;
+	return parent / (div + 1);
 }
 
-static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
+static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
 {
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
-}
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+	u32 val;
 
-static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
-}
+	if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
+		return -EINVAL;
 
-static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
-}
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
 
-static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
-}
+	val = __raw_readl(S5PC100_CLKDIV0);
+	val &= S5PC100_CLKDIV0_ARM_MASK;
+	val |= (div - 1);
+	__raw_writel(val, S5PC100_CLKDIV0);
 
-static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+	return 0;
 }
 
-static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
-}
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_dout_apll,
+	.get_rate	= s5pc100_clk_arm_get_rate,
+	.set_rate	= s5pc100_clk_arm_set_rate,
+	.round_rate	= s5pc100_clk_arm_round_rate,
+};
 
-static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
+static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
 {
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
-}
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
 
-static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
-}
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
+	ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
 
-static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+	return rate / (ratio + 1);
 }
 
-static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
-}
+static struct clk clk_dout_d0_bus = {
+	.name		= "dout_d0_bus",
+	.id		= -1,
+	.parent		= &clk_arm,
+	.get_rate	= s5pc100_clk_dout_d0_bus_get_rate,
+};
 
-int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
+static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
 {
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
+	ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
+
+	return rate / (ratio + 1);
 }
 
-int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
+static struct clk clk_dout_pclkd0 = {
+	.name		= "dout_pclkd0",
+	.id		= -1,
+	.parent		= &clk_dout_d0_bus,
+	.get_rate	= s5pc100_clk_dout_pclkd0_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
 {
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
+	ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
+
+	return rate / (ratio + 1);
 }
 
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "dsi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
-	}, {
-		.name		= "csi",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
-	}, {
-		.name		= "ccan0",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
-	}, {
-		.name		= "ccan1",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
-	}, {
-		.name		= "keypad",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
-	}, {
-		.name		= "hclkd2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
-	}, {
-		.name		= "iis-d2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
-	}, {
-		.name		= "otg",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
-	},
+static struct clk clk_dout_apll2 = {
+	.name		= "dout_apll2",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.get_rate	= s5pc100_clk_dout_apll2_get_rate,
 };
 
-static struct clk init_clocks[] = {
-	/* System1 (D0_0) devices */
-	{
-		.name		= "intc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
-	}, {
-		.name		= "tzic",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
-	}, {
-		.name		= "cf-ata",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
-	}, {
-		.name		= "mdma",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
-	}, {
-		.name		= "g2d",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
-	}, {
-		.name		= "secss",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
-	}, {
-		.name		= "cssys",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
-	},
+/* MPLL */
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
 
-	/* Memory (D0_1) devices */
-	{
-		.name		= "dmc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
-	}, {
-		.name		= "sromc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
-	}, {
-		.name		= "onenand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
-	}, {
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
-	}, {
-		.name		= "intmem",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
-	}, {
-		.name		= "ebi",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
-	},
+static struct clk_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
 
-	/* System2 (D0_2) devices */
-	{
-		.name		= "seckey",
-		.id		= -1,
-		.parent		= &clk_pd0,
-		.enable		= s5pc1xx_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
-	}, {
-		.name		= "sdm",
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
 		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
 	},
+	.shift		= S5PC100_CLKSRC0_MPLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_MPLL_MASK,
+	.sources	= &clk_src_mpll,
+	.reg_source	= S5PC100_CLKSRC0,
+};
 
-	/* File (D1_0) devices */
-	{
-		.name		= "pdma0",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
-	}, {
-		.name		= "pdma1",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
-	}, {
-		.name		= "modem",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
-	},
+static struct clk *clkset_am_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_dout_apll2,
+};
 
-	/* Multimedia1 (D1_1) devices */
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
-	}, {
-		.name		= "rotator",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
-	}, {
-		.name		= "fimc",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
-	}, {
-		.name		= "fimc",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
-	}, {
-		.name		= "fimc",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
-	}, {
-		.name		= "jpeg",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
-	}, {
-		.name		= "g3d",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
-	},
+static struct clk_sources clk_src_am = {
+	.sources	= clkset_am_list,
+	.nr_sources	= ARRAY_SIZE(clkset_am_list),
+};
 
-	/* Multimedia2 (D1_2) devices */
-	{
-		.name		= "tv",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
-	}, {
-		.name		= "vp",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
-	}, {
-		.name		= "mixer",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
-	}, {
-		.name		= "hdmi",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
-	}, {
-		.name		= "mfc",
+static struct clksrc_clk clk_mout_am = {
+	.clk = {
+		.name		= "mout_am",
 		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
 	},
+	.shift		= S5PC100_CLKSRC0_AMMUX_SHIFT,
+	.mask		= S5PC100_CLKSRC0_AMMUX_MASK,
+	.sources	= &clk_src_am,
+	.reg_source	= S5PC100_CLKSRC0,
+};
 
-	/* System (D1_3) devices */
-	{
-		.name		= "chipid",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
-	}, {
-		.name		= "apc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
-	}, {
-		.name		= "iec",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
-	}, {
-		.name		= "systimer",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
-	},
+static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
 
-	/* Connectivity (D1_4) devices */
-	{
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
-	}, {
-		.name		= "hdmi-i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
-	}, {
-		.name		= "spi",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
-	}, {
-		.name		= "irda",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
-	}, {
-		.name		= "hsitx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
-	}, {
-		.name		= "hsirx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
-	},
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
 
-	/* Audio (D1_5) devices */
-	{
-		.name		= "iis",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
-	}, {
-		.name		= "iis",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
-	}, {
-		.name		= "iis",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
-	}, {
-		.name		= "pcm",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
-	}, {
-		.name		= "pcm",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
-	}, {
-		.name		= "spdif",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
-	}, {
-		.name		= "keyif",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
-	}, {
-		.name		= "cg",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
-	},
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
+	ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
 
-	/* Audio (D2_0) devices: all disabled */
+	return rate / (ratio + 1);
+}
 
-	/* Special Clocks 1 */
-	{
-		.name		= "sclk_hpm",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC1XX_CLKGATE_SCLK0_HPM,
-	}, {
-		.name		= "sclk_onenand",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
-	}, {
-		.name		= "sclk_mmc_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
-	}, {
-		.name		= "sclk_mmc_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
-	}, {
-		.name		= "sclk_mmc_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
-	},
+static struct clk clk_dout_d1_bus = {
+	.name		= "dout_d1_bus",
+	.id		= -1,
+	.parent		= &clk_mout_am.clk,
+	.get_rate	= s5pc100_clk_dout_d1_bus_get_rate,
+};
 
-	/* Special Clocks 2 */
-	{
-		.name		= "sclk_tv_54",
-		.id		= -1,
-		.parent		= &clk_54m,
-		.enable		= s5pc1xx_sclk1_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_TV54,
-	}, {
-		.name		= "sclk_vdac_54",
-		.id		= -1,
-		.parent		= &clk_54m,
-		.enable		= s5pc1xx_sclk1_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_VDAC54,
-	}, {
-		.name		= "sclk_spdif",
+static struct clk *clkset_onenand_list[] = {
+	[0] = &clk_dout_d0_bus,
+	[1] = &clk_dout_d1_bus,
+};
+
+static struct clk_sources clk_src_onenand = {
+	.sources	= clkset_onenand_list,
+	.nr_sources	= ARRAY_SIZE(clkset_onenand_list),
+};
+
+static struct clksrc_clk clk_mout_onenand = {
+	.clk = {
+		.name		= "mout_onenand",
 		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_sclk1_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_SPDIF,
 	},
+	.shift		= S5PC100_CLKSRC0_ONENAND_SHIFT,
+	.mask		= S5PC100_CLKSRC0_ONENAND_MASK,
+	.sources	= &clk_src_onenand,
+	.reg_source	= S5PC100_CLKSRC0,
 };
 
-void __init s5pc1xx_register_clocks(void)
+static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
 {
-	struct clk *clkp;
-	int ret;
-	int ptr;
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
 
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
+	ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
 
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
+	return rate / (ratio + 1);
+}
 
-		(clkp->enable)(clkp, 0);
-	}
+static struct clk clk_dout_pclkd1 = {
+	.name		= "dout_pclkd1",
+	.id		= -1,
+	.parent		= &clk_dout_d1_bus,
+	.get_rate	= s5pc100_clk_dout_pclkd1_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+	ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
 
-	s3c_pwmclk_init();
+	return rate / (ratio + 1);
 }
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
+
+static struct clk clk_dout_mpll2 = {
+	.name		= "dout_mpll2",
 	.id		= -1,
+	.parent		= &clk_mout_am.clk,
+	.get_rate	= s5pc100_clk_dout_mpll2_get_rate,
 };
 
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
+static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
 
-static struct clk_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
+	ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_cam = {
+	.name		= "dout_cam",
+	.id		= -1,
+	.parent		= &clk_dout_mpll2,
+	.get_rate	= s5pc100_clk_dout_cam_get_rate,
 };
 
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-		.id		= -1,
-	},
-	.shift		= S5PC1XX_CLKSRC0_APLL_SHIFT,
-	.mask		= S5PC1XX_CLKSRC0_APLL_MASK,
-	.sources	= &clk_src_apll,
-	.reg_source	= S5PC1XX_CLK_SRC0,
+static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+	ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_am.clk,
+	.get_rate	= s5pc100_clk_dout_mpll_get_rate,
 };
 
+/* EPLL */
 static struct clk clk_fout_epll = {
 	.name		= "fout_epll",
 	.id		= -1,
@@ -827,91 +409,57 @@ static struct clksrc_clk clk_mout_epll = {
 		.name		= "mout_epll",
 		.id		= -1,
 	},
-	.shift		= S5PC1XX_CLKSRC0_EPLL_SHIFT,
-	.mask		= S5PC1XX_CLKSRC0_EPLL_MASK,
+	.shift		= S5PC100_CLKSRC0_EPLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_EPLL_MASK,
 	.sources	= &clk_src_epll,
-	.reg_source	= S5PC1XX_CLK_SRC0,
+	.reg_source	= S5PC100_CLKSRC0,
 };
 
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clk_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-		.id		= -1,
-	},
-	.shift		= S5PC1XX_CLKSRC0_MPLL_SHIFT,
-	.mask		= S5PC1XX_CLKSRC0_MPLL_MASK,
-	.sources	= &clk_src_mpll,
-	.reg_source	= S5PC1XX_CLK_SRC0,
-};
-
-static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
-	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
-
-	return rate;
-}
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
+/* HPLL */
+static struct clk clk_fout_hpll = {
+	.name		= "fout_hpll",
 	.id		= -1,
-	.parent		= &clk_mout_mpll.clk,
-	.get_rate	= s5pc1xx_clk_doutmpll_get_rate,
 };
 
-static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
-	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
-
-	return rate;
-}
-
-struct clk clk_dout_mpll2 = {
-	.name		= "dout_mpll2",
-	.id		= -1,
-	.parent		= &clk_mout_mpll.clk,
-	.get_rate	= s5pc1xx_clk_doutmpll2_get_rate,
+static struct clk *clk_src_hpll_list[] = {
+	[0] = &clk_27m,
+	[1] = &clk_fout_hpll,
 };
 
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	NULL
+static struct clk_sources clk_src_hpll = {
+	.sources	= clk_src_hpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_hpll_list),
 };
 
-static struct clk_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+static struct clksrc_clk clk_mout_hpll = {
+	.clk	= {
+		.name		= "mout_hpll",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC0_HPLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_HPLL_MASK,
+	.sources	= &clk_src_hpll,
+	.reg_source	= S5PC100_CLKSRC0,
 };
 
+/* Peripherals */
+/*
+ * The peripheral clocks are all controlled via clocksource followed
+ * by an optional divider and gate stage. We currently roll this into
+ * one clock which hides the intermediate clock from the mux.
+ *
+ * Note, the JPEG clock can only be an even divider...
+ *
+ * The scaler and LCD clocks depend on the S5PC100 version, and also
+ * have a common parent divisor so are not included here.
+ */
+
 static inline struct clksrc_clk *to_clksrc(struct clk *clk)
 {
 	return container_of(clk, struct clksrc_clk, clk);
 }
 
-static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+static unsigned long s5pc100_getrate_clksrc(struct clk *clk)
 {
 	struct clksrc_clk *sclk = to_clksrc(clk);
 	unsigned long rate = clk_get_rate(clk->parent);
@@ -925,7 +473,7 @@ static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
 	return rate;
 }
 
-static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate)
 {
 	struct clksrc_clk *sclk = to_clksrc(clk);
 	void __iomem *reg = sclk->reg_divider;
@@ -938,14 +486,14 @@ static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->shift);
-	val |= (div - 1) << sclk->shift;
+	val &= ~(0xf << sclk->divider_shift);
+	val |= (div - 1) << sclk->divider_shift;
 	__raw_writel(val, reg);
 
 	return 0;
 }
 
-static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent)
 {
 	struct clksrc_clk *sclk = to_clksrc(clk);
 	struct clk_sources *srcs = sclk->sources;
@@ -970,7 +518,7 @@ static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
 	return -EINVAL;
 }
 
-static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+static unsigned long s5pc100_roundrate_clksrc(struct clk *clk,
 					      unsigned long rate)
 {
 	unsigned long parent_rate = clk_get_rate(clk->parent);
@@ -992,35 +540,466 @@ static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
 	return rate;
 }
 
+static struct clk *clkset_spi_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll2,
+	&clk_fin_epll,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_spi = {
+	.sources	= clkset_spi_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spi_list),
+};
+
+static struct clksrc_clk clk_spi0 = {
+	.clk	= {
+		.name		= "spi_bus",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_SPI0_SHIFT,
+	.mask		= S5PC100_CLKSRC1_SPI0_MASK,
+	.sources	= &clkset_spi,
+	.divider_shift	= S5PC100_CLKDIV2_SPI0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clksrc_clk clk_spi1 = {
+	.clk	= {
+		.name		= "spi_bus",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_SPI1_SHIFT,
+	.mask		= S5PC100_CLKSRC1_SPI1_MASK,
+	.sources	= &clkset_spi,
+	.divider_shift	= S5PC100_CLKDIV2_SPI1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clksrc_clk clk_spi2 = {
+	.clk	= {
+		.name		= "spi_bus",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_SPI2_SHIFT,
+	.mask		= S5PC100_CLKSRC1_SPI2_MASK,
+	.sources	= &clkset_spi,
+	.divider_shift	= S5PC100_CLKDIV2_SPI2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+};
+
+static struct clk_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
 static struct clksrc_clk clk_uart_uclk1 = {
 	.clk	= {
 		.name		= "uclk1",
 		.id		= -1,
 		.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.set_parent	= s5pc1xx_setparent_clksrc,
-		.get_rate	= s5pc1xx_getrate_clksrc,
-		.set_rate	= s5pc1xx_setrate_clksrc,
-		.round_rate	= s5pc1xx_roundrate_clksrc,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
 	},
 	.shift		= S5PC100_CLKSRC1_UART_SHIFT,
 	.mask		= S5PC100_CLKSRC1_UART_MASK,
 	.sources	= &clkset_uart,
 	.divider_shift	= S5PC100_CLKDIV2_UART_SHIFT,
-	.reg_divider	= S5PC1XX_CLK_DIV2,
-	.reg_source	= S5PC1XX_CLK_SRC1,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clk clk_iis_cd0 = {
+	.name		= "iis_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_iis_cd1 = {
+	.name		= "iis_cdclk1",
+	.id		= -1,
+};
+
+static struct clk clk_iis_cd2 = {
+	.name		= "iis_cdclk2",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd0 = {
+	.name		= "pcm_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd1 = {
+	.name		= "pcm_cdclk1",
+	.id		= -1,
+};
+
+static struct clk *clkset_audio0_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_iis_cd0,
+	&clk_pcm_cd0,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio0 = {
+	.sources	= clkset_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
+};
+
+static struct clksrc_clk clk_audio0 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO0,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC3_AUDIO0_SHIFT,
+	.mask		= S5PC100_CLKSRC3_AUDIO0_MASK,
+	.sources	= &clkset_audio0,
+	.divider_shift	= S5PC100_CLKDIV4_AUDIO0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV4,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_audio1_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_iis_cd1,
+	&clk_pcm_cd1,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio1 = {
+	.sources	= clkset_audio1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
+};
+
+static struct clksrc_clk clk_audio1 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO1,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC3_AUDIO1_SHIFT,
+	.mask		= S5PC100_CLKSRC3_AUDIO1_MASK,
+	.sources	= &clkset_audio1,
+	.divider_shift	= S5PC100_CLKDIV4_AUDIO1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV4,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_audio2_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_iis_cd2,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio2 = {
+	.sources	= clkset_audio2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
+};
+
+static struct clksrc_clk clk_audio2 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO2,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC3_AUDIO2_SHIFT,
+	.mask		= S5PC100_CLKSRC3_AUDIO2_MASK,
+	.sources	= &clkset_audio2,
+	.divider_shift	= S5PC100_CLKDIV4_AUDIO2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV4,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_spdif_list[] = {
+	&clk_audio0.clk,
+	&clk_audio1.clk,
+	&clk_audio2.clk,
+};
+
+static struct clk_sources clkset_spdif = {
+	.sources	= clkset_spdif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spdif_list),
+};
+
+static struct clksrc_clk clk_spdif = {
+	.clk	= {
+		.name		= "spdif",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC3_SPDIF_SHIFT,
+	.mask		= S5PC100_CLKSRC3_SPDIF_MASK,
+	.sources	= &clkset_spdif,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_lcd_fimc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_mout_hpll.clk,
+	&clk_vclk_54m,
+};
+
+static struct clk_sources clkset_lcd_fimc = {
+	.sources	= clkset_lcd_fimc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_lcd_fimc_list),
+};
+
+static struct clksrc_clk clk_lcd = {
+	.clk	= {
+		.name		= "lcd",
+		.id		= -1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_LCD,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_LCD_SHIFT,
+	.mask		= S5PC100_CLKSRC2_LCD_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_LCD_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc0 = {
+	.clk	= {
+		.name		= "fimc",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC0,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_FIMC0_SHIFT,
+	.mask		= S5PC100_CLKSRC2_FIMC0_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_FIMC0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc1 = {
+	.clk	= {
+		.name		= "fimc",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC1,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_FIMC1_SHIFT,
+	.mask		= S5PC100_CLKSRC2_FIMC1_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_FIMC1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc2 = {
+	.clk	= {
+		.name		= "fimc",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC2,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_FIMC2_SHIFT,
+	.mask		= S5PC100_CLKSRC2_FIMC2_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_FIMC2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clk *clkset_mmc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_mout_hpll.clk ,
+};
+
+static struct clk_sources clkset_mmc = {
+	.sources	= clkset_mmc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mmc_list),
+};
+
+static struct clksrc_clk clk_mmc0 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_MMC0_SHIFT,
+	.mask		= S5PC100_CLKSRC2_MMC0_MASK,
+	.sources	= &clkset_mmc,
+	.divider_shift	= S5PC100_CLKDIV3_MMC0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_mmc1 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_MMC1_SHIFT,
+	.mask		= S5PC100_CLKSRC2_MMC1_MASK,
+	.sources	= &clkset_mmc,
+	.divider_shift	= S5PC100_CLKDIV3_MMC1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_mmc2 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_MMC2_SHIFT,
+	.mask		= S5PC100_CLKSRC2_MMC2_MASK,
+	.sources	= &clkset_mmc,
+	.divider_shift	= S5PC100_CLKDIV3_MMC2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+
+static struct clk *clkset_usbhost_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_mout_hpll.clk,
+	&clk_48m,
+};
+
+static struct clk_sources clkset_usbhost = {
+	.sources	= clkset_usbhost_list,
+	.nr_sources	= ARRAY_SIZE(clkset_usbhost_list),
+};
+
+static struct clksrc_clk clk_usbhost = {
+	.clk	= {
+		.name		= "usbhost",
+		.id		= -1,
+		.ctrlbit        = S5PC100_CLKGATE_SCLK0_USBHOST,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_UHOST_SHIFT,
+	.mask		= S5PC100_CLKSRC1_UHOST_MASK,
+	.sources	= &clkset_usbhost,
+	.divider_shift	= S5PC100_CLKDIV2_UHOST_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
 };
 
 /* Clock initialisation code */
 
 static struct clksrc_clk *init_parents[] = {
 	&clk_mout_apll,
-	&clk_mout_epll,
 	&clk_mout_mpll,
+	&clk_mout_am,
+	&clk_mout_onenand,
+	&clk_mout_epll,
+	&clk_mout_hpll,
+	&clk_spi0,
+	&clk_spi1,
+	&clk_spi2,
 	&clk_uart_uclk1,
+	&clk_audio0,
+	&clk_audio1,
+	&clk_audio2,
+	&clk_spdif,
+	&clk_lcd,
+	&clk_fimc0,
+	&clk_fimc1,
+	&clk_fimc2,
+	&clk_mmc0,
+	&clk_mmc1,
+	&clk_mmc2,
+	&clk_usbhost,
 };
 
-static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk)
 {
 	struct clk_sources *srcs = clk->sources;
 	u32 clksrc = __raw_readl(clk->reg_source);
@@ -1036,9 +1015,9 @@ static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
 
 	clk->clk.parent = srcs->sources[clksrc];
 
-	printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
-	       clk->clk.name, clk->clk.parent->name, clksrc,
-	       clk_get_rate(&clk->clk));
+	printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n",
+		clk->clk.name, clk->clk.parent->name, clksrc,
+		print_mhz(clk_get_rate(&clk->clk)));
 }
 
 #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
@@ -1052,20 +1031,16 @@ void __init_or_cpufreq s5pc100_setup_clocks(void)
 	unsigned long hclk;
 	unsigned long pclkd0;
 	unsigned long pclk;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long hpll;
-	unsigned long epll;
+	unsigned long apll, mpll, epll, hpll;
 	unsigned int ptr;
 	u32 clkdiv0, clkdiv1;
 
 	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
 
-	clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
-	clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+	clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
+	clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
 
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
-			__func__, clkdiv0, clkdiv1);
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
 
 	xtal_clk = clk_get(NULL, "xtal");
 	BUG_ON(IS_ERR(xtal_clk));
@@ -1075,48 +1050,81 @@ void __init_or_cpufreq s5pc100_setup_clocks(void)
 
 	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
 
-	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
-	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
-	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
+	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
+	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
 	hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
 
-	printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
-	       apll, mpll, epll, hpll);
+	printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
+		", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
+		print_mhz(apll), print_mhz(mpll),
+		print_mhz(epll), print_mhz(hpll));
 
-	armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+	armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
 	armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
 	hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
 	pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
 	hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
 	pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
 
-	printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
-	       armclk, hclkd0, pclkd0, hclk, pclk);
+	printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
+		" PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
+		" PCLK=%ld.%03ld MHz\n",
+		print_mhz(armclk), print_mhz(hclkd0),
+		print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
 
 	clk_fout_apll.rate = apll;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
+	clk_fout_hpll.rate = hpll;
 
 	clk_h.rate = hclk;
 	clk_p.rate = pclk;
+	clk_f.rate = armclk;
 
 	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s5pc1xx_set_clksrc(init_parents[ptr]);
+		s5pc100_set_clksrc(init_parents[ptr]);
 }
 
 static struct clk *clks[] __initdata = {
 	&clk_ext_xtal_mux,
-	&clk_mout_epll.clk,
-	&clk_fout_epll,
+	&clk_mout_apll.clk,
+	&clk_dout_apll,
+	&clk_dout_d0_bus,
+	&clk_dout_pclkd0,
+	&clk_dout_apll2,
 	&clk_mout_mpll.clk,
+	&clk_mout_am.clk,
+	&clk_dout_d1_bus,
+	&clk_mout_onenand.clk,
+	&clk_dout_pclkd1,
+	&clk_dout_mpll2,
+	&clk_dout_cam,
 	&clk_dout_mpll,
+	&clk_mout_epll.clk,
+	&clk_fout_epll,
+	&clk_iis_cd0,
+	&clk_iis_cd1,
+	&clk_iis_cd2,
+	&clk_pcm_cd0,
+	&clk_pcm_cd1,
+	&clk_spi0.clk,
+	&clk_spi1.clk,
+	&clk_spi2.clk,
 	&clk_uart_uclk1.clk,
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_54m,
+	&clk_audio0.clk,
+	&clk_audio1.clk,
+	&clk_audio2.clk,
+	&clk_spdif.clk,
+	&clk_lcd.clk,
+	&clk_fimc0.clk,
+	&clk_fimc1.clk,
+	&clk_fimc2.clk,
+	&clk_mmc0.clk,
+	&clk_mmc1.clk,
+	&clk_mmc2.clk,
+	&clk_usbhost.clk,
+	&clk_arm,
 };
 
 void __init s5pc100_register_clocks(void)
@@ -1133,7 +1141,4 @@ void __init s5pc100_register_clocks(void)
 			       clkp->name, ret);
 		}
 	}
-
-	clk_mpll.parent = &clk_mout_mpll.clk;
-	clk_epll.parent = &clk_mout_epll.clk;
 }
diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
new file mode 100644
index 000000000000..1a63768a9a2e
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/plat-s5pc100/setup-fb-24bpp.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * Base S5PC1XX setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-s5pc1xx.h>
+
+#define DISR_OFFSET	0x7008
+
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio = 0;
+
+	for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
index 3d00c025fffb..5e4a7c3a231e 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c0.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -17,9 +17,14 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <linux/gpio.h>
 #include <plat/iic.h>
+#include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	/* Pin configuration would be needed */
+	s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
index c8f3ca42f51d..a0a8b4ae6ad8 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c1.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -17,9 +17,14 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <linux/gpio.h>
 #include <plat/iic.h>
+#include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
 {
-	/* Pin configuration would be needed */
+	s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
new file mode 100644
index 000000000000..185c8941e644
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2009 Samsung Eletronics
+ *
+ * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+
+void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+	unsigned int num;
+
+	num = width;
+	/* In case of 8 width, we should decrease the 2 */
+	if (width == 8)
+		num = width - 2;
+
+	end = S5PC100_GPG0(2 + num);
+
+	/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
+	for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	if (width == 8) {
+		for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S5PC100_GPG2(2 + width);
+
+	/* Set all the necessary GPG2 pins to special-function 2 */
+	for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S5PC100_GPG3(2 + width);
+
+	/* Set all the necessary GPG3 pins to special-function 2 */
+	for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
new file mode 100644
index 000000000000..486a0d6301e7
--- /dev/null
+++ b/arch/arm/plat-samsung/Kconfig
@@ -0,0 +1,17 @@
+# arch/arm/plat-samsung/Kconfig
+#
+# Copyright 2009 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config PLAT_SAMSUNG
+	bool
+	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
+	default y
+	help
+	  Base platform code for all Samsung SoC based systems
+
+if PLAT_SAMSUNG
+
+
+endif
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
new file mode 100644
index 000000000000..4478b9f7dc34
--- /dev/null
+++ b/arch/arm/plat-samsung/Makefile
@@ -0,0 +1,11 @@
+# arch/arm/plat-s3c64xx/Makefile
+#
+# Copyright 2009 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:= dummy.o
+obj-				:=
+
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 35e3bd9858df..d856354f4272 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -92,6 +92,7 @@ config PLATFORM_AT32AP
 	select PERFORMANCE_COUNTERS
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_ALLOCATOR
+	select HAVE_FB_ATMEL
 
 #
 # CPU types
diff --git a/arch/avr32/boards/hammerhead/Kconfig b/arch/avr32/boards/hammerhead/Kconfig
index fda2331f9789..5c13d785cc70 100644
--- a/arch/avr32/boards/hammerhead/Kconfig
+++ b/arch/avr32/boards/hammerhead/Kconfig
@@ -24,7 +24,7 @@ config BOARD_HAMMERHEAD_SND
 	bool "Atmel AC97 Sound support"
 	help
 	  This enables Sound support for the Hammerhead board. You may
-	  also go trough the ALSA settings to get it working.
+	  also go through the ALSA settings to get it working.
 
 	  Choose 'Y' here if you have ordered a Corona daugther board and
 	  want to make your board funky.
diff --git a/arch/avr32/include/asm/bug.h b/arch/avr32/include/asm/bug.h
index 331d45bab18f..2aa373cc61b5 100644
--- a/arch/avr32/include/asm/bug.h
+++ b/arch/avr32/include/asm/bug.h
@@ -52,7 +52,7 @@
 #define BUG()								\
 	do {								\
 		_BUG_OR_WARN(0);					\
-		for (;;);						\
+		unreachable();						\
 	} while (0)
 
 #define WARN_ON(condition)							\
diff --git a/arch/avr32/include/asm/cacheflush.h b/arch/avr32/include/asm/cacheflush.h
index 670674749b20..96e53820bbbd 100644
--- a/arch/avr32/include/asm/cacheflush.h
+++ b/arch/avr32/include/asm/cacheflush.h
@@ -107,6 +107,7 @@ extern void flush_icache_page(struct vm_area_struct *vma, struct page *page);
  * do something here, but only for certain configurations.  No such
  * configurations exist at this time.
  */
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(page)		do { } while (0)
 #define flush_dcache_mmap_unlock(page)		do { } while (0)
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h
index fe863f9794d5..c8d1fae49476 100644
--- a/arch/avr32/include/asm/socket.h
+++ b/arch/avr32/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* __ASM_AVR32_SOCKET_H */
diff --git a/arch/avr32/include/asm/syscalls.h b/arch/avr32/include/asm/syscalls.h
index 483d666c27c0..66a197266637 100644
--- a/arch/avr32/include/asm/syscalls.h
+++ b/arch/avr32/include/asm/syscalls.h
@@ -29,10 +29,6 @@ asmlinkage int sys_sigaltstack(const stack_t __user *, stack_t __user *,
 			       struct pt_regs *);
 asmlinkage int sys_rt_sigreturn(struct pt_regs *);
 
-/* kernel/sys_avr32.c */
-asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long,
-			  unsigned long, unsigned long, off_t);
-
 /* mm/cache.c */
 asmlinkage int sys_cacheflush(int, void __user *, size_t);
 
diff --git a/arch/avr32/kernel/sys_avr32.c b/arch/avr32/kernel/sys_avr32.c
index 5d2daeaf356f..459349b5ed5a 100644
--- a/arch/avr32/kernel/sys_avr32.c
+++ b/arch/avr32/kernel/sys_avr32.c
@@ -5,39 +5,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/mm.h>
 #include <linux/unistd.h>
 
-#include <asm/mman.h>
-#include <asm/uaccess.h>
-#include <asm/syscalls.h>
-
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
-			  unsigned long prot, unsigned long flags,
-			  unsigned long fd, off_t offset)
-{
-	int error = -EBADF;
-	struct file *file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			return error;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, offset);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-	return error;
-}
-
 int kernel_execve(const char *file, char **argv, char **envp)
 {
 	register long scno asm("r8") = __NR_execve;
diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S
index f7244cd02fbb..0447a3e2ba64 100644
--- a/arch/avr32/kernel/syscall-stubs.S
+++ b/arch/avr32/kernel/syscall-stubs.S
@@ -61,7 +61,7 @@ __sys_execve:
 __sys_mmap2:
 	pushm	lr
 	st.w	--sp, ARG6
-	call	sys_mmap2
+	call	sys_mmap_pgoff
 	sub	sp, -4
 	popm	pc
 
diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S
index 7ee0057613b3..e76bad16b0f0 100644
--- a/arch/avr32/kernel/syscall_table.S
+++ b/arch/avr32/kernel/syscall_table.S
@@ -295,4 +295,5 @@ sys_call_table:
 	.long	sys_signalfd
 	.long	sys_ni_syscall		/* 280, was sys_timerfd */
 	.long	sys_eventfd
+	.long	sys_recvmmsg
 	.long	sys_ni_syscall		/* r8 is saturated at nr_syscalls */
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index af03a36c7a4e..417eaac7fe99 100644
--- a/arch/blackfin/include/asm/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -68,9 +68,11 @@ do { memcpy(dst, src, len);						\
 #endif
 #if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
 # define flush_dcache_range(start,end)		blackfin_dcache_flush_range((start), (end))
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 # define flush_dcache_page(page)		blackfin_dflush_page(page_address(page))
 #else
 # define flush_dcache_range(start,end)		do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 # define flush_dcache_page(page)		do { } while (0)
 #endif
 
diff --git a/arch/blackfin/include/asm/fcntl.h b/arch/blackfin/include/asm/fcntl.h
index 8727b2b382f1..251c911d59c1 100644
--- a/arch/blackfin/include/asm/fcntl.h
+++ b/arch/blackfin/include/asm/fcntl.h
@@ -7,8 +7,6 @@
 #ifndef _BFIN_FCNTL_H
 #define _BFIN_FCNTL_H
 
-/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
-   located on an ext2 file system */
 #define O_DIRECTORY	 040000	/* must be a directory */
 #define O_NOFOLLOW	0100000	/* don't follow links */
 #define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 5cc7e2e9e415..45876427eb2d 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -215,22 +215,18 @@ copy_thread(unsigned long clone_flags,
 /*
  * sys_execve() executes a new program.
  */
-
 asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp)
 {
 	int error;
 	char *filename;
 	struct pt_regs *regs = (struct pt_regs *)((&name) + 6);
 
-	lock_kernel();
 	filename = getname(name);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
-		goto out;
+		return error;
 	error = do_execve(filename, argv, envp, regs);
 	putname(filename);
- out:
-	unlock_kernel();
 	return error;
 }
 
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index afcef129d4e8..2e7f8e10bf87 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -22,39 +22,6 @@
 #include <asm/cacheflush.h>
 #include <asm/dma.h>
 
-/* common code for old and new mmaps */
-static inline long
-do_mmap2(unsigned long addr, unsigned long len,
-	 unsigned long prot, unsigned long flags,
-	 unsigned long fd, unsigned long pgoff)
-{
-	int error = -EBADF;
-	struct file *file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
- out:
-	return error;
-}
-
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
-			  unsigned long prot, unsigned long flags,
-			  unsigned long fd, unsigned long pgoff)
-{
-	return do_mmap2(addr, len, prot, flags, fd, pgoff);
-}
-
 asmlinkage void *sys_sram_alloc(size_t size, unsigned long flags)
 {
 	return sram_alloc_with_lsl(size, flags);
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 6b7325d634af..78cb3d38f899 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -619,7 +619,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
 
 /*
  * Similar to get_user, do some address checking, then dereference
- * Return true on sucess, false on bad address
+ * Return true on success, false on bad address
  */
 static bool get_instruction(unsigned short *val, unsigned short *address)
 {
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index e06f4112c695..f9fd2b2a2956 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -542,7 +542,7 @@
 #define HMDMA0_CONTROL		0xFFC03300	/* Handshake MDMA0 Control Register					*/
 #define HMDMA0_ECINIT		0xFFC03304	/* HMDMA0 Initial Edge Count Register				*/
 #define HMDMA0_BCINIT		0xFFC03308	/* HMDMA0 Initial Block Count Register				*/
-#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshhold Register		*/
+#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshold Register		*/
 #define HMDMA0_ECOVERFLOW	0xFFC03310	/* HMDMA0 Edge Count Overflow Interrupt Register	*/
 #define HMDMA0_ECOUNT		0xFFC03314	/* HMDMA0 Current Edge Count Register				*/
 #define HMDMA0_BCOUNT		0xFFC03318	/* HMDMA0 Current Block Count Register				*/
@@ -550,7 +550,7 @@
 #define HMDMA1_CONTROL		0xFFC03340	/* Handshake MDMA1 Control Register					*/
 #define HMDMA1_ECINIT		0xFFC03344	/* HMDMA1 Initial Edge Count Register				*/
 #define HMDMA1_BCINIT		0xFFC03348	/* HMDMA1 Initial Block Count Register				*/
-#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshhold Register		*/
+#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshold Register		*/
 #define HMDMA1_ECOVERFLOW	0xFFC03350	/* HMDMA1 Edge Count Overflow Interrupt Register	*/
 #define HMDMA1_ECOUNT		0xFFC03354	/* HMDMA1 Current Edge Count Register				*/
 #define HMDMA1_BCOUNT		0xFFC03358	/* HMDMA1 Current Block Count Register				*/
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index f821700716ee..b9dbb73d7ef0 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -544,7 +544,7 @@
 #define HMDMA0_CONTROL		0xFFC03300	/* Handshake MDMA0 Control Register					*/
 #define HMDMA0_ECINIT		0xFFC03304	/* HMDMA0 Initial Edge Count Register				*/
 #define HMDMA0_BCINIT		0xFFC03308	/* HMDMA0 Initial Block Count Register				*/
-#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshhold Register		*/
+#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshold Register		*/
 #define HMDMA0_ECOVERFLOW	0xFFC03310	/* HMDMA0 Edge Count Overflow Interrupt Register	*/
 #define HMDMA0_ECOUNT		0xFFC03314	/* HMDMA0 Current Edge Count Register				*/
 #define HMDMA0_BCOUNT		0xFFC03318	/* HMDMA0 Current Block Count Register				*/
@@ -552,7 +552,7 @@
 #define HMDMA1_CONTROL		0xFFC03340	/* Handshake MDMA1 Control Register					*/
 #define HMDMA1_ECINIT		0xFFC03344	/* HMDMA1 Initial Edge Count Register				*/
 #define HMDMA1_BCINIT		0xFFC03348	/* HMDMA1 Initial Block Count Register				*/
-#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshhold Register		*/
+#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshold Register		*/
 #define HMDMA1_ECOVERFLOW	0xFFC03350	/* HMDMA1 Edge Count Overflow Interrupt Register	*/
 #define HMDMA1_ECOUNT		0xFFC03354	/* HMDMA1 Current Edge Count Register				*/
 #define HMDMA1_BCOUNT		0xFFC03358	/* HMDMA1 Current Block Count Register				*/
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index cebb14feb1ba..a6d20ca57683 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -934,7 +934,7 @@
 #define HMDMA0_CONTROL		0xFFC03300	/* Handshake MDMA0 Control Register                                     */
 #define HMDMA0_ECINIT		0xFFC03304	/* HMDMA0 Initial Edge Count Register                           */
 #define HMDMA0_BCINIT		0xFFC03308	/* HMDMA0 Initial Block Count Register                          */
-#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshhold Register         */
+#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshold Register         */
 #define HMDMA0_ECOVERFLOW	0xFFC03310	/* HMDMA0 Edge Count Overflow Interrupt Register        */
 #define HMDMA0_ECOUNT		0xFFC03314	/* HMDMA0 Current Edge Count Register                           */
 #define HMDMA0_BCOUNT		0xFFC03318	/* HMDMA0 Current Block Count Register                          */
@@ -942,7 +942,7 @@
 #define HMDMA1_CONTROL		0xFFC03340	/* Handshake MDMA1 Control Register                                     */
 #define HMDMA1_ECINIT		0xFFC03344	/* HMDMA1 Initial Edge Count Register                           */
 #define HMDMA1_BCINIT		0xFFC03348	/* HMDMA1 Initial Block Count Register                          */
-#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshhold Register         */
+#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshold Register         */
 #define HMDMA1_ECOVERFLOW	0xFFC03350	/* HMDMA1 Edge Count Overflow Interrupt Register        */
 #define HMDMA1_ECOUNT		0xFFC03354	/* HMDMA1 Current Edge Count Register                           */
 #define HMDMA1_BCOUNT		0xFFC03358	/* HMDMA1 Current Block Count Register                          */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index dd414ae4ba4c..39f588dcd382 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -491,7 +491,7 @@
 #define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
 #define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
 #define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
-#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshold Register */
 #define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
 #define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
 #define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
@@ -501,7 +501,7 @@
 #define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
 #define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
 #define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
-#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshold Register */
 #define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
 #define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
 #define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 5a9dbabe0a68..c4dcf302d9f5 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -470,7 +470,7 @@
 #define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
 #define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
 #define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
-#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshold Register */
 #define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
 #define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
 #define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
@@ -480,7 +480,7 @@
 #define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
 #define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
 #define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
-#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshold Register */
 #define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
 #define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
 #define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h
index 82cd593f7391..a5079980968c 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h
@@ -853,7 +853,7 @@
 #define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
 #define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
 #define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
-#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshold Register */
 #define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
 #define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
 #define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
@@ -863,7 +863,7 @@
 #define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
 #define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
 #define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
-#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshold Register */
 #define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
 #define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
 #define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h
index 6fc6e39ab61b..f7f043560c6f 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h
@@ -1024,7 +1024,7 @@
 #define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
 #define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
 #define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
-#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshold Register */
 #define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
 #define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
 #define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
@@ -1034,7 +1034,7 @@
 #define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
 #define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
 #define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
-#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshold Register */
 #define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
 #define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
 #define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 94a0375cbdcf..f3f8bb46b517 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1422,7 +1422,7 @@ ENTRY(_sys_call_table)
 	.long _sys_ni_syscall	/* streams2 */
 	.long _sys_vfork		/* 190 */
 	.long _sys_getrlimit
-	.long _sys_mmap2
+	.long _sys_mmap_pgoff
 	.long _sys_truncate64
 	.long _sys_ftruncate64
 	.long _sys_stat64	/* 195 */
@@ -1600,6 +1600,7 @@ ENTRY(_sys_call_table)
 	.long _sys_pwritev
 	.long _sys_rt_tgsigqueueinfo
 	.long _sys_perf_event_open
+	.long _sys_recvmmsg		/* 370 */
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
diff --git a/arch/cris/arch-v10/mm/fault.c b/arch/cris/arch-v10/mm/fault.c
index 087a2096f221..ed60588f8467 100644
--- a/arch/cris/arch-v10/mm/fault.c
+++ b/arch/cris/arch-v10/mm/fault.c
@@ -80,8 +80,7 @@ handle_mmu_bus_fault(struct pt_regs *regs)
 	 * do_page_fault may have flushed the TLB so we have to restore
 	 * the MMU registers.
 	 */
-	local_save_flags(flags);
-	local_irq_disable();
+	local_irq_save(flags);
 	pmd = (pmd_t *)(pgd + pgd_index(address));
 	if (pmd_none(*pmd))
 		goto exit;
diff --git a/arch/cris/arch-v10/mm/tlb.c b/arch/cris/arch-v10/mm/tlb.c
index 4a496e4ffacc..21d78c599bab 100644
--- a/arch/cris/arch-v10/mm/tlb.c
+++ b/arch/cris/arch-v10/mm/tlb.c
@@ -134,28 +134,6 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
 	local_irq_restore(flags);
 }
 
-/* dump the entire TLB for debug purposes */
-
-#if 0
-void
-dump_tlb_all(void)
-{
-	int i;
-	unsigned long flags;
-
-	printk("TLB dump. LO is: pfn | reserved | global | valid | kernel | we  |\n");
-
-	local_save_flags(flags);
-	local_irq_disable();
-	for(i = 0; i < NUM_TLB_ENTRIES; i++) {
-		*R_TLB_SELECT = ( IO_FIELD(R_TLB_SELECT, index, i) );
-		printk("Entry %d: HI 0x%08lx, LO 0x%08lx\n",
-		       i, *R_TLB_HI, *R_TLB_LO);
-	}
-	local_irq_restore(flags);
-}
-#endif
-
 /*
  * Initialize the context related info for a new mm_struct
  * instance.
diff --git a/arch/cris/include/asm/cacheflush.h b/arch/cris/include/asm/cacheflush.h
index cf60e3f69f8d..36795bca605e 100644
--- a/arch/cris/include/asm/cacheflush.h
+++ b/arch/cris/include/asm/cacheflush.h
@@ -12,6 +12,7 @@
 #define flush_cache_dup_mm(mm)			do { } while (0)
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/cris/include/asm/socket.h b/arch/cris/include/asm/socket.h
index 45ec49bdb7b1..1a4a61909ca8 100644
--- a/arch/cris/include/asm/socket.h
+++ b/arch/cris/include/asm/socket.h
@@ -62,6 +62,8 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
 
 
diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c
index 2ad962c7e88e..c2bbb1ac98a9 100644
--- a/arch/cris/kernel/sys_cris.c
+++ b/arch/cris/kernel/sys_cris.c
@@ -26,31 +26,6 @@
 #include <asm/uaccess.h>
 #include <asm/segment.h>
 
-/* common code for old and new mmaps */
-static inline long
-do_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
-        unsigned long flags, unsigned long fd, unsigned long pgoff)
-{
-        int error = -EBADF;
-        struct file * file = NULL;
-
-        flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-        if (!(flags & MAP_ANONYMOUS)) {
-                file = fget(fd);
-                if (!file)
-                        goto out;
-        }
-
-        down_write(&current->mm->mmap_sem);
-        error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-        up_write(&current->mm->mmap_sem);
-
-        if (file)
-                fput(file);
-out:
-        return error;
-}
-
 asmlinkage unsigned long old_mmap(unsigned long __user *args)
 {        
 	unsigned long buffer[6];
@@ -63,7 +38,7 @@ asmlinkage unsigned long old_mmap(unsigned long __user *args)
 	if (buffer[5] & ~PAGE_MASK) /* verify that offset is on page boundary */
 		goto out;
 
-	err = do_mmap2(buffer[0], buffer[1], buffer[2], buffer[3],
+	err = sys_mmap_pgoff(buffer[0], buffer[1], buffer[2], buffer[3],
                        buffer[4], buffer[5] >> PAGE_SHIFT);
 out:
 	return err;
@@ -73,7 +48,8 @@ asmlinkage long
 sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
           unsigned long flags, unsigned long fd, unsigned long pgoff)
 {
-        return do_mmap2(addr, len, prot, flags, fd, pgoff);
+	/* bug(?): 8Kb pages here */
+        return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 }
 
 /*
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index 4a7cdd9ea1ee..380df1a73a6e 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -209,7 +209,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
 	/* Are we prepared to handle this kernel fault?
 	 *
 	 * (The kernel has valid exception-points in the source
-	 *  when it acesses user-memory. When it fails in one
+	 *  when it accesses user-memory. When it fails in one
 	 *  of those points, we find it in a table and do a jump
 	 *  to some fixup code that loads an appropriate error
 	 *  code)
diff --git a/arch/frv/include/asm/cacheflush.h b/arch/frv/include/asm/cacheflush.h
index 432a69e7f3d4..edbac54ae015 100644
--- a/arch/frv/include/asm/cacheflush.h
+++ b/arch/frv/include/asm/cacheflush.h
@@ -47,6 +47,7 @@ static inline void __flush_cache_all(void)
 }
 
 /* dcache/icache coherency... */
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 #ifdef CONFIG_MMU
 extern void flush_dcache_page(struct page *page);
 #else
diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h
index 2dea726095c2..a6b26880c1ec 100644
--- a/arch/frv/include/asm/socket.h
+++ b/arch/frv/include/asm/socket.h
@@ -60,5 +60,7 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
 
diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
index 0d4d3e3a4cfc..5fa3889d858b 100644
--- a/arch/frv/kernel/pm.c
+++ b/arch/frv/kernel/pm.c
@@ -211,37 +211,6 @@ static int cmode_procctl(ctl_table *ctl, int write,
 	return try_set_cmode(new_cmode)?:*lenp;
 }
 
-static int cmode_sysctl(ctl_table *table,
-			void __user *oldval, size_t __user *oldlenp,
-			void __user *newval, size_t newlen)
-{
-	if (oldval && oldlenp) {
-		size_t oldlen;
-
-		if (get_user(oldlen, oldlenp))
-			return -EFAULT;
-
-		if (oldlen != sizeof(int))
-			return -EINVAL;
-
-		if (put_user(clock_cmode_current, (unsigned __user *)oldval) ||
-		    put_user(sizeof(int), oldlenp))
-			return -EFAULT;
-	}
-	if (newval && newlen) {
-		int new_cmode;
-
-		if (newlen != sizeof(int))
-			return -EINVAL;
-
-		if (get_user(new_cmode, (int __user *)newval))
-			return -EFAULT;
-
-		return try_set_cmode(new_cmode)?:1;
-	}
-	return 1;
-}
-
 static int try_set_p0(int new_p0)
 {
 	unsigned long flags, clkc;
@@ -314,37 +283,6 @@ static int p0_procctl(ctl_table *ctl, int write,
 	return try_set_p0(new_p0)?:*lenp;
 }
 
-static int p0_sysctl(ctl_table *table,
-		     void __user *oldval, size_t __user *oldlenp,
-		     void __user *newval, size_t newlen)
-{
-	if (oldval && oldlenp) {
-		size_t oldlen;
-
-		if (get_user(oldlen, oldlenp))
-			return -EFAULT;
-
-		if (oldlen != sizeof(int))
-			return -EINVAL;
-
-		if (put_user(clock_p0_current, (unsigned __user *)oldval) ||
-		    put_user(sizeof(int), oldlenp))
-			return -EFAULT;
-	}
-	if (newval && newlen) {
-		int new_p0;
-
-		if (newlen != sizeof(int))
-			return -EINVAL;
-
-		if (get_user(new_p0, (int __user *)newval))
-			return -EFAULT;
-
-		return try_set_p0(new_p0)?:1;
-	}
-	return 1;
-}
-
 static int cm_procctl(ctl_table *ctl, int write,
 		      void __user *buffer, size_t *lenp, loff_t *fpos)
 {
@@ -358,87 +296,47 @@ static int cm_procctl(ctl_table *ctl, int write,
 	return try_set_cm(new_cm)?:*lenp;
 }
 
-static int cm_sysctl(ctl_table *table,
-		     void __user *oldval, size_t __user *oldlenp,
-		     void __user *newval, size_t newlen)
-{
-	if (oldval && oldlenp) {
-		size_t oldlen;
-
-		if (get_user(oldlen, oldlenp))
-			return -EFAULT;
-
-		if (oldlen != sizeof(int))
-			return -EINVAL;
-
-		if (put_user(clock_cm_current, (unsigned __user *)oldval) ||
-		    put_user(sizeof(int), oldlenp))
-			return -EFAULT;
-	}
-	if (newval && newlen) {
-		int new_cm;
-
-		if (newlen != sizeof(int))
-			return -EINVAL;
-
-		if (get_user(new_cm, (int __user *)newval))
-			return -EFAULT;
-
-		return try_set_cm(new_cm)?:1;
-	}
-	return 1;
-}
-
-
 static struct ctl_table pm_table[] =
 {
 	{
-		.ctl_name	= CTL_PM_SUSPEND,
 		.procname	= "suspend",
 		.data		= NULL,
 		.maxlen		= 0,
 		.mode		= 0200,
-		.proc_handler	= &sysctl_pm_do_suspend,
+		.proc_handler	= sysctl_pm_do_suspend,
 	},
 	{
-		.ctl_name	= CTL_PM_CMODE,
 		.procname	= "cmode",
 		.data		= &clock_cmode_current,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &cmode_procctl,
-		.strategy	= &cmode_sysctl,
+		.proc_handler	= cmode_procctl,
 	},
 	{
-		.ctl_name	= CTL_PM_P0,
 		.procname	= "p0",
 		.data		= &clock_p0_current,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &p0_procctl,
-		.strategy	= &p0_sysctl,
+		.proc_handler	= p0_procctl,
 	},
 	{
-		.ctl_name	= CTL_PM_CM,
 		.procname	= "cm",
 		.data		= &clock_cm_current,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &cm_procctl,
-		.strategy	= &cm_sysctl,
+		.proc_handler	= cm_procctl,
 	},
-	{ .ctl_name = 0}
+	{ }
 };
 
 static struct ctl_table pm_dir_table[] =
 {
 	{
-		.ctl_name	= CTL_PM,
 		.procname	= "pm",
 		.mode		= 0555,
 		.child		= pm_table,
 	},
-	{ .ctl_name = 0}
+	{ }
 };
 
 /*
diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c
index 904255938216..21d0fd19276d 100644
--- a/arch/frv/kernel/process.c
+++ b/arch/frv/kernel/process.c
@@ -255,15 +255,12 @@ asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __
 	int error;
 	char * filename;
 
-	lock_kernel();
 	filename = getname(name);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
-		goto out;
+		return error;
 	error = do_execve(filename, argv, envp, __frame);
 	putname(filename);
- out:
-	unlock_kernel();
 	return error;
 }
 
diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c
index 2b6b5289cdcc..1d3d4c9e2521 100644
--- a/arch/frv/kernel/sys_frv.c
+++ b/arch/frv/kernel/sys_frv.c
@@ -31,9 +31,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 			  unsigned long prot, unsigned long flags,
 			  unsigned long fd, unsigned long pgoff)
 {
-	int error = -EBADF;
-	struct file * file = NULL;
-
 	/* As with sparc32, make sure the shift for mmap2 is constant
 	   (12), no matter what PAGE_SIZE we have.... */
 
@@ -41,69 +38,10 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	   trying to map something we can't */
 	if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
 		return -EINVAL;
-	pgoff >>= PAGE_SHIFT - 12;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
-#if 0 /* DAVIDM - do we want this */
-struct mmap_arg_struct64 {
-	__u32 addr;
-	__u32 len;
-	__u32 prot;
-	__u32 flags;
-	__u64 offset; /* 64 bits */
-	__u32 fd;
-};
-
-asmlinkage long sys_mmap64(struct mmap_arg_struct64 *arg)
-{
-	int error = -EFAULT;
-	struct file * file = NULL;
-	struct mmap_arg_struct64 a;
-	unsigned long pgoff;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-
-	if ((long)a.offset & ~PAGE_MASK)
-		return -EINVAL;
-
-	pgoff = a.offset >> PAGE_SHIFT;
-	if ((a.offset >> PAGE_SHIFT) != pgoff)
-		return -EINVAL;
-
-	if (!(a.flags & MAP_ANONYMOUS)) {
-		error = -EBADF;
-		file = fget(a.fd);
-		if (!file)
-			goto out;
-	}
-	a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
 
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-	if (file)
-		fput(file);
-out:
-	return error;
+	return sys_mmap_pgoff(addr, len, prot, flags, fd,
+			      pgoff >> (PAGE_SHIFT - 12));
 }
-#endif
 
 /*
  * sys_ipc() is the de-multiplexer for the SysV IPC calls..
diff --git a/arch/frv/kernel/sysctl.c b/arch/frv/kernel/sysctl.c
index 3e9d7e03fb95..035516cb7a97 100644
--- a/arch/frv/kernel/sysctl.c
+++ b/arch/frv/kernel/sysctl.c
@@ -176,21 +176,19 @@ static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp,
 static struct ctl_table frv_table[] =
 {
 	{
-		.ctl_name 	= 1,
 		.procname 	= "cache-mode",
 		.data		= NULL,
 		.maxlen		= 0,
 		.mode		= 0644,
-		.proc_handler	= &procctl_frv_cachemode,
+		.proc_handler	= procctl_frv_cachemode,
 	},
 #ifdef CONFIG_MMU
 	{
-		.ctl_name	= 2,
 		.procname	= "pin-cxnr",
 		.data		= NULL,
 		.maxlen		= 0,
 		.mode		= 0644,
-		.proc_handler	= &procctl_frv_pin_cxnr
+		.proc_handler	= procctl_frv_pin_cxnr
 	},
 #endif
 	{}
@@ -203,7 +201,6 @@ static struct ctl_table frv_table[] =
 static struct ctl_table frv_dir_table[] =
 {
 	{
-		.ctl_name	= CTL_FRV,
 		.procname	= "frv",
 		.mode 		= 0555,
 		.child		= frv_table
diff --git a/arch/h8300/include/asm/cacheflush.h b/arch/h8300/include/asm/cacheflush.h
index 5ffdca217b95..4cf2df20c1ce 100644
--- a/arch/h8300/include/asm/cacheflush.h
+++ b/arch/h8300/include/asm/cacheflush.h
@@ -15,6 +15,7 @@
 #define	flush_cache_dup_mm(mm)		do { } while (0)
 #define	flush_cache_range(vma,a,b)
 #define	flush_cache_page(vma,p,pfn)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define	flush_dcache_page(page)
 #define	flush_dcache_mmap_lock(mapping)
 #define	flush_dcache_mmap_unlock(mapping)
diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h
index 1547f01c8e22..04c0f4596eb5 100644
--- a/arch/h8300/include/asm/socket.h
+++ b/arch/h8300/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index e2f33d0f9969..bd883faa983d 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -218,15 +218,12 @@ asmlinkage int sys_execve(char *name, char **argv, char **envp,int dummy,...)
 	char * filename;
 	struct pt_regs *regs = (struct pt_regs *) ((unsigned char *)&dummy-4);
 
-	lock_kernel();
 	filename = getname(name);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
-		goto out;
+		return error;
 	error = do_execve(filename, argv, envp, regs);
 	putname(filename);
-out:
-	unlock_kernel();
 	return error;
 }
 
diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c
index 8cb5d73a0e35..b5969db0ca10 100644
--- a/arch/h8300/kernel/sys_h8300.c
+++ b/arch/h8300/kernel/sys_h8300.c
@@ -26,39 +26,6 @@
 #include <asm/traps.h>
 #include <asm/unistd.h>
 
-/* common code for old and new mmaps */
-static inline long do_mmap2(
-	unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long pgoff)
-{
-	int error = -EBADF;
-	struct file * file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long pgoff)
-{
-	return do_mmap2(addr, len, prot, flags, fd, pgoff);
-}
-
 /*
  * Perform the select(nd, in, out, ex, tv) and mmap() system
  * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
@@ -87,57 +54,11 @@ asmlinkage int old_mmap(struct mmap_arg_struct *arg)
 	if (a.offset & ~PAGE_MASK)
 		goto out;
 
-	a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-#if 0 /* DAVIDM - do we want this */
-struct mmap_arg_struct64 {
-	__u32 addr;
-	__u32 len;
-	__u32 prot;
-	__u32 flags;
-	__u64 offset; /* 64 bits */
-	__u32 fd;
-};
-
-asmlinkage long sys_mmap64(struct mmap_arg_struct64 *arg)
-{
-	int error = -EFAULT;
-	struct file * file = NULL;
-	struct mmap_arg_struct64 a;
-	unsigned long pgoff;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-
-	if ((long)a.offset & ~PAGE_MASK)
-		return -EINVAL;
-
-	pgoff = a.offset >> PAGE_SHIFT;
-	if ((a.offset >> PAGE_SHIFT) != pgoff)
-		return -EINVAL;
-
-	if (!(a.flags & MAP_ANONYMOUS)) {
-		error = -EBADF;
-		file = fget(a.fd);
-		if (!file)
-			goto out;
-	}
-	a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-	if (file)
-		fput(file);
+	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
+			       a.offset >> PAGE_SHIFT);
 out:
 	return error;
 }
-#endif
 
 struct sel_arg_struct {
 	unsigned long n;
diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S
index 4eb67faac633..2d69881eda6a 100644
--- a/arch/h8300/kernel/syscalls.S
+++ b/arch/h8300/kernel/syscalls.S
@@ -206,7 +206,7 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_ni_syscall)	/* streams2 */
 	.long SYMBOL_NAME(sys_vfork)            /* 190 */
 	.long SYMBOL_NAME(sys_getrlimit)
-	.long SYMBOL_NAME(sys_mmap2)
+	.long SYMBOL_NAME(sys_mmap_pgoff)
 	.long SYMBOL_NAME(sys_truncate64)
 	.long SYMBOL_NAME(sys_ftruncate64)
 	.long SYMBOL_NAME(sys_stat64)		/* 195 */
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 674a8374c6d9..f332e3fe4237 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1381,7 +1381,7 @@ sba_coalesce_chunks(struct ioc *ioc, struct device *dev,
 #endif
 
 			/*
-			** Not virtually contigous.
+			** Not virtually contiguous.
 			** Terminate prev chunk.
 			** Start a new chunk.
 			**
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index af9405cd70e5..2fd7479aa216 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -79,7 +79,7 @@ GLOBAL_ENTRY(ia32_ret_from_clone)
 (p6)	br.cond.spnt .ia32_strace_check_retval
 	;;					// prevent RAW on r8
 END(ia32_ret_from_clone)
-	// fall thrugh
+	// fall through
 GLOBAL_ENTRY(ia32_ret_from_syscall)
 	PT_REGS_UNWIND_INFO(0)
 
@@ -327,7 +327,7 @@ ia32_syscall_table:
 	data8 compat_sys_writev
 	data8 sys_getsid
 	data8 sys_fdatasync
-	data8 sys32_sysctl
+	data8 compat_sys_sysctl
 	data8 sys_mlock		  /* 150 */
 	data8 sys_munlock
 	data8 sys_mlockall
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 625ed8f76fce..045b746b9808 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -858,6 +858,9 @@ ia32_do_mmap (struct file *file, unsigned long addr, unsigned long len, int prot
 
 	prot = get_prot32(prot);
 
+	if (flags & MAP_HUGETLB)
+		return -ENOMEM;
+
 #if PAGE_SHIFT > IA32_PAGE_SHIFT
 	mutex_lock(&ia32_mmap_mutex);
 	{
@@ -1628,61 +1631,6 @@ sys32_msync (unsigned int start, unsigned int len, int flags)
 	return sys_msync(addr, len + (start - addr), flags);
 }
 
-struct sysctl32 {
-	unsigned int	name;
-	int		nlen;
-	unsigned int	oldval;
-	unsigned int	oldlenp;
-	unsigned int	newval;
-	unsigned int	newlen;
-	unsigned int	__unused[4];
-};
-
-#ifdef CONFIG_SYSCTL_SYSCALL
-asmlinkage long
-sys32_sysctl (struct sysctl32 __user *args)
-{
-	struct sysctl32 a32;
-	mm_segment_t old_fs = get_fs ();
-	void __user *oldvalp, *newvalp;
-	size_t oldlen;
-	int __user *namep;
-	long ret;
-
-	if (copy_from_user(&a32, args, sizeof(a32)))
-		return -EFAULT;
-
-	/*
-	 * We need to pre-validate these because we have to disable address checking
-	 * before calling do_sysctl() because of OLDLEN but we can't run the risk of the
-	 * user specifying bad addresses here.  Well, since we're dealing with 32 bit
-	 * addresses, we KNOW that access_ok() will always succeed, so this is an
-	 * expensive NOP, but so what...
-	 */
-	namep = (int __user *) compat_ptr(a32.name);
-	oldvalp = compat_ptr(a32.oldval);
-	newvalp = compat_ptr(a32.newval);
-
-	if ((oldvalp && get_user(oldlen, (int __user *) compat_ptr(a32.oldlenp)))
-	    || !access_ok(VERIFY_WRITE, namep, 0)
-	    || !access_ok(VERIFY_WRITE, oldvalp, 0)
-	    || !access_ok(VERIFY_WRITE, newvalp, 0))
-		return -EFAULT;
-
-	set_fs(KERNEL_DS);
-	lock_kernel();
-	ret = do_sysctl(namep, a32.nlen, oldvalp, (size_t __user *) &oldlen,
-			newvalp, (size_t) a32.newlen);
-	unlock_kernel();
-	set_fs(old_fs);
-
-	if (oldvalp && put_user (oldlen, (int __user *) compat_ptr(a32.oldlenp)))
-		return -EFAULT;
-
-	return ret;
-}
-#endif
-
 asmlinkage long
 sys32_newuname (struct new_utsname __user *name)
 {
diff --git a/arch/ia64/include/asm/cacheflush.h b/arch/ia64/include/asm/cacheflush.h
index c8ce2719fee8..429eefc93ee7 100644
--- a/arch/ia64/include/asm/cacheflush.h
+++ b/arch/ia64/include/asm/cacheflush.h
@@ -25,6 +25,7 @@
 #define flush_cache_vmap(start, end)		do { } while (0)
 #define flush_cache_vunmap(start, end)		do { } while (0)
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 #define flush_dcache_page(page)			\
 do {						\
 	clear_bit(PG_arch_1, &(page)->flags);	\
diff --git a/arch/ia64/include/asm/kvm.h b/arch/ia64/include/asm/kvm.h
index 18a7e49abbc5..bc90c75adf67 100644
--- a/arch/ia64/include/asm/kvm.h
+++ b/arch/ia64/include/asm/kvm.h
@@ -60,6 +60,7 @@ struct kvm_ioapic_state {
 #define KVM_IRQCHIP_PIC_MASTER   0
 #define KVM_IRQCHIP_PIC_SLAVE    1
 #define KVM_IRQCHIP_IOAPIC       2
+#define KVM_NR_IRQCHIPS          3
 
 #define KVM_CONTEXT_SIZE	8*1024
 
diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index d9b6325a9328..a362e67e0ca6 100644
--- a/arch/ia64/include/asm/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -475,7 +475,6 @@ struct kvm_arch {
 	struct list_head assigned_dev_head;
 	struct iommu_domain *iommu_domain;
 	int iommu_flags;
-	struct hlist_head irq_ack_notifier_list;
 
 	unsigned long irq_sources_bitmap;
 	unsigned long irq_states[KVM_IOAPIC_NUM_PINS];
diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h
index 48822c0811d8..74724b24c2b7 100644
--- a/arch/ia64/include/asm/perfmon_default_smpl.h
+++ b/arch/ia64/include/asm/perfmon_default_smpl.h
@@ -67,7 +67,7 @@ typedef struct {
         unsigned long   ip;                     /* where did the overflow interrupt happened  */
         unsigned long   tstamp;                 /* ar.itc when entering perfmon intr. handler */
 
-        unsigned short  cpu;                    /* cpu on which the overfow occured */
+        unsigned short  cpu;                    /* cpu on which the overflow occured */
         unsigned short  set;                    /* event set active when overflow ocurred   */
         int    		tgid;              	/* thread group id (for NPTL, this is getpid()) */
 } pfm_default_smpl_entry_t;
diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h
index 22a6f18a5313..6052422a22b3 100644
--- a/arch/ia64/include/asm/sn/shubio.h
+++ b/arch/ia64/include/asm/sn/shubio.h
@@ -3289,7 +3289,7 @@ typedef ii_icrb0_e_u_t icrbe_t;
 #define IIO_IIDSR_LVL_SHIFT     0
 #define IIO_IIDSR_LVL_MASK      0x000000ff
 
-/* Xtalk timeout threshhold register (IIO_IXTT) */
+/* Xtalk timeout threshold register (IIO_IXTT) */
 #define IXTT_RRSP_TO_SHFT	55	/* read response timeout */
 #define IXTT_RRSP_TO_MASK	(0x1FULL << IXTT_RRSP_TO_SHFT)
 #define IXTT_RRSP_PS_SHFT	32	/* read responsed TO prescalar */
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h
index 0b0d5ff062e5..51427eaa51ba 100644
--- a/arch/ia64/include/asm/socket.h
+++ b/arch/ia64/include/asm/socket.h
@@ -69,4 +69,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/ia64/include/asm/swiotlb.h b/arch/ia64/include/asm/swiotlb.h
index dcbaea7ce128..f0acde68aaea 100644
--- a/arch/ia64/include/asm/swiotlb.h
+++ b/arch/ia64/include/asm/swiotlb.h
@@ -4,8 +4,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/swiotlb.h>
 
-extern int swiotlb_force;
-
 #ifdef CONFIG_SWIOTLB
 extern int swiotlb;
 extern void pci_swiotlb_init(void);
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index 5a5347f5c4e4..10a8f21ca9e3 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -311,11 +311,12 @@
 #define __NR_preadv			1319
 #define __NR_pwritev			1320
 #define __NR_rt_tgsigqueueinfo		1321
+#define __NR_recvmmsg			1322
 
 #ifdef __KERNEL__
 
 
-#define NR_syscalls			298 /* length of syscall table */
+#define NR_syscalls			299 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about
diff --git a/arch/ia64/include/asm/xen/hypervisor.h b/arch/ia64/include/asm/xen/hypervisor.h
index 88afb54501e4..67455c2ed2b1 100644
--- a/arch/ia64/include/asm/xen/hypervisor.h
+++ b/arch/ia64/include/asm/xen/hypervisor.h
@@ -37,35 +37,9 @@
 #include <xen/interface/xen.h>
 #include <xen/interface/version.h>	/* to compile feature.c */
 #include <xen/features.h>		/* to comiple xen-netfront.c */
+#include <xen/xen.h>
 #include <asm/xen/hypercall.h>
 
-/* xen_domain_type is set before executing any C code by early_xen_setup */
-enum xen_domain_type {
-	XEN_NATIVE,	/* running on bare hardware */
-	XEN_PV_DOMAIN,	/* running in a PV domain */
-	XEN_HVM_DOMAIN,	/* running in a Xen hvm domain*/
-};
-
-#ifdef CONFIG_XEN
-extern enum xen_domain_type xen_domain_type;
-#else
-#define xen_domain_type		XEN_NATIVE
-#endif
-
-#define xen_domain()		(xen_domain_type != XEN_NATIVE)
-#define xen_pv_domain()		(xen_domain() &&			\
-				 xen_domain_type == XEN_PV_DOMAIN)
-#define xen_hvm_domain()	(xen_domain() &&			\
-				 xen_domain_type == XEN_HVM_DOMAIN)
-
-#ifdef CONFIG_XEN_DOM0
-#define xen_initial_domain()	(xen_pv_domain() &&			\
-				 (xen_start_info->flags & SIF_INITDOMAIN))
-#else
-#define xen_initial_domain()	(0)
-#endif
-
-
 #ifdef CONFIG_XEN
 extern struct shared_info *HYPERVISOR_shared_info;
 extern struct start_info *xen_start_info;
diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c
index 6631a9dfafdc..b942f4032d7a 100644
--- a/arch/ia64/kernel/crash.c
+++ b/arch/ia64/kernel/crash.c
@@ -239,32 +239,29 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 #ifdef CONFIG_SYSCTL
 static ctl_table kdump_ctl_table[] = {
 	{
-		.ctl_name = CTL_UNNUMBERED,
 		.procname = "kdump_on_init",
 		.data = &kdump_on_init,
 		.maxlen = sizeof(int),
 		.mode = 0644,
-		.proc_handler = &proc_dointvec,
+		.proc_handler = proc_dointvec,
 	},
 	{
-		.ctl_name = CTL_UNNUMBERED,
 		.procname = "kdump_on_fatal_mca",
 		.data = &kdump_on_fatal_mca,
 		.maxlen = sizeof(int),
 		.mode = 0644,
-		.proc_handler = &proc_dointvec,
+		.proc_handler = proc_dointvec,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table sys_table[] = {
 	{
-	  .ctl_name = CTL_KERN,
 	  .procname = "kernel",
 	  .mode = 0555,
 	  .child = kdump_ctl_table,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 #endif
 
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index d0e7d37017b4..d75b872ca4dc 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1806,6 +1806,7 @@ sys_call_table:
 	data8 sys_preadv
 	data8 sys_pwritev			// 1320
 	data8 sys_rt_tgsigqueueinfo
+	data8 sys_recvmmsg
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c
index d5764a3d74af..b091111270cb 100644
--- a/arch/ia64/kernel/esi.c
+++ b/arch/ia64/kernel/esi.c
@@ -84,7 +84,7 @@ static int __init esi_init (void)
 		      case ESI_DESC_ENTRY_POINT:
 			break;
 		      default:
-			printk(KERN_WARNING "Unkown table type %d found in "
+			printk(KERN_WARNING "Unknown table type %d found in "
 			       "ESI table, ignoring rest of table\n", *p);
 			return -ENODEV;
 		}
diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c
index 285aae8431c6..53292abf846c 100644
--- a/arch/ia64/kernel/pci-swiotlb.c
+++ b/arch/ia64/kernel/pci-swiotlb.c
@@ -41,7 +41,7 @@ struct dma_map_ops swiotlb_dma_ops = {
 void __init swiotlb_dma_init(void)
 {
 	dma_ops = &swiotlb_dma_ops;
-	swiotlb_init();
+	swiotlb_init(1);
 }
 
 void __init pci_swiotlb_init(void)
@@ -51,7 +51,7 @@ void __init pci_swiotlb_init(void)
 		swiotlb = 1;
 		printk(KERN_INFO "PCI-DMA: Re-initialize machine vector.\n");
 		machvec_init("dig");
-		swiotlb_init();
+		swiotlb_init(1);
 		dma_ops = &swiotlb_dma_ops;
 #else
 		panic("Unable to find Intel IOMMU");
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index f1782705b1f7..599b233bef75 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -522,42 +522,37 @@ EXPORT_SYMBOL(pfm_sysctl);
 
 static ctl_table pfm_ctl_table[]={
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "debug",
 		.data		= &pfm_sysctl.debug,
 		.maxlen		= sizeof(int),
 		.mode		= 0666,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "debug_ovfl",
 		.data		= &pfm_sysctl.debug_ovfl,
 		.maxlen		= sizeof(int),
 		.mode		= 0666,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "fastctxsw",
 		.data		= &pfm_sysctl.fastctxsw,
 		.maxlen		= sizeof(int),
 		.mode		= 0600,
-		.proc_handler	=  &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "expert_mode",
 		.data		= &pfm_sysctl.expert_mode,
 		.maxlen		= sizeof(int),
 		.mode		= 0600,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{}
 };
 static ctl_table pfm_sysctl_dir[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "perfmon",
 		.mode		= 0555,
 		.child		= pfm_ctl_table,
@@ -566,7 +561,6 @@ static ctl_table pfm_sysctl_dir[] = {
 };
 static ctl_table pfm_sysctl_root[] = {
 	{
-		.ctl_name	= CTL_KERN,
 		.procname	= "kernel",
 		.mode		= 0555,
 		.child		= pfm_sysctl_dir,
@@ -3523,7 +3517,7 @@ pfm_use_debug_registers(struct task_struct *task)
  * IA64_THREAD_DBG_VALID set. This indicates a task which was
  * able to use the debug registers for debugging purposes via
  * ptrace(). Therefore we know it was not using them for
- * perfmormance monitoring, so we only decrement the number
+ * performance monitoring, so we only decrement the number
  * of "ptraced" debug register users to keep the count up to date
  */
 int
diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c
index 92ed83f34036..609d50056a6c 100644
--- a/arch/ia64/kernel/sys_ia64.c
+++ b/arch/ia64/kernel/sys_ia64.c
@@ -100,51 +100,7 @@ sys_getpagesize (void)
 asmlinkage unsigned long
 ia64_brk (unsigned long brk)
 {
-	unsigned long rlim, retval, newbrk, oldbrk;
-	struct mm_struct *mm = current->mm;
-
-	/*
-	 * Most of this replicates the code in sys_brk() except for an additional safety
-	 * check and the clearing of r8.  However, we can't call sys_brk() because we need
-	 * to acquire the mmap_sem before we can do the test...
-	 */
-	down_write(&mm->mmap_sem);
-
-	if (brk < mm->end_code)
-		goto out;
-	newbrk = PAGE_ALIGN(brk);
-	oldbrk = PAGE_ALIGN(mm->brk);
-	if (oldbrk == newbrk)
-		goto set_brk;
-
-	/* Always allow shrinking brk. */
-	if (brk <= mm->brk) {
-		if (!do_munmap(mm, newbrk, oldbrk-newbrk))
-			goto set_brk;
-		goto out;
-	}
-
-	/* Check against unimplemented/unmapped addresses: */
-	if ((newbrk - oldbrk) > RGN_MAP_LIMIT || REGION_OFFSET(newbrk) > RGN_MAP_LIMIT)
-		goto out;
-
-	/* Check against rlimit.. */
-	rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur;
-	if (rlim < RLIM_INFINITY && brk - mm->start_data > rlim)
-		goto out;
-
-	/* Check against existing mmap mappings. */
-	if (find_vma_intersection(mm, oldbrk, newbrk+PAGE_SIZE))
-		goto out;
-
-	/* Ok, looks good - let it rip. */
-	if (do_brk(oldbrk, newbrk-oldbrk) != oldbrk)
-		goto out;
-set_brk:
-	mm->brk = brk;
-out:
-	retval = mm->brk;
-	up_write(&mm->mmap_sem);
+	unsigned long retval = sys_brk(brk);
 	force_successful_syscall_return();
 	return retval;
 }
@@ -185,39 +141,6 @@ int ia64_mmap_check(unsigned long addr, unsigned long len,
 	return 0;
 }
 
-static inline unsigned long
-do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, unsigned long pgoff)
-{
-	struct file *file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			return -EBADF;
-
-		if (!file->f_op || !file->f_op->mmap) {
-			addr = -ENODEV;
-			goto out;
-		}
-	}
-
-	/* Careful about overflows.. */
-	len = PAGE_ALIGN(len);
-	if (!len || len > TASK_SIZE) {
-		addr = -EINVAL;
-		goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	addr = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-out:	if (file)
-		fput(file);
-	return addr;
-}
-
 /*
  * mmap2() is like mmap() except that the offset is expressed in units
  * of PAGE_SIZE (instead of bytes).  This allows to mmap2() (pieces
@@ -226,7 +149,7 @@ out:	if (file)
 asmlinkage unsigned long
 sys_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, long pgoff)
 {
-	addr = do_mmap2(addr, len, prot, flags, fd, pgoff);
+	addr = sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 	if (!IS_ERR((void *) addr))
 		force_successful_syscall_return();
 	return addr;
@@ -238,7 +161,7 @@ sys_mmap (unsigned long addr, unsigned long len, int prot, int flags, int fd, lo
 	if (offset_in_page(off) != 0)
 		return -EINVAL;
 
-	addr = do_mmap2(addr, len, prot, flags, fd, off >> PAGE_SHIFT);
+	addr = sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT);
 	if (!IS_ERR((void *) addr))
 		force_successful_syscall_return();
 	return addr;
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 4990495d7531..a35c661e5e89 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -473,7 +473,7 @@ void update_vsyscall_tz(void)
 {
 }
 
-void update_vsyscall(struct timespec *wall, struct clocksource *c)
+void update_vsyscall(struct timespec *wall, struct clocksource *c, u32 mult)
 {
         unsigned long flags;
 
@@ -481,7 +481,7 @@ void update_vsyscall(struct timespec *wall, struct clocksource *c)
 
         /* copy fsyscall clock data */
         fsyscall_gtod_data.clk_mask = c->mask;
-        fsyscall_gtod_data.clk_mult = c->mult;
+        fsyscall_gtod_data.clk_mult = mult;
         fsyscall_gtod_data.clk_shift = c->shift;
         fsyscall_gtod_data.clk_fsys_mmio = c->fsys_mmio;
         fsyscall_gtod_data.clk_cycle_last = c->cycle_last;
diff --git a/arch/ia64/kvm/Makefile b/arch/ia64/kvm/Makefile
index 0bb99b732908..1089b3e918ac 100644
--- a/arch/ia64/kvm/Makefile
+++ b/arch/ia64/kvm/Makefile
@@ -49,7 +49,7 @@ EXTRA_CFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
 EXTRA_AFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
 
 common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
-		coalesced_mmio.o irq_comm.o)
+		coalesced_mmio.o irq_comm.o assigned-dev.o)
 
 ifeq ($(CONFIG_IOMMU_API),y)
 common-objs += $(addprefix ../../../virt/kvm/, iommu.o)
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 0ad09f05efa9..5fdeec5fddcf 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -124,7 +124,7 @@ long ia64_pal_vp_create(u64 *vpd, u64 *host_iva, u64 *opt_handler)
 
 static  DEFINE_SPINLOCK(vp_lock);
 
-void kvm_arch_hardware_enable(void *garbage)
+int kvm_arch_hardware_enable(void *garbage)
 {
 	long  status;
 	long  tmp_base;
@@ -137,7 +137,7 @@ void kvm_arch_hardware_enable(void *garbage)
 	slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
 	local_irq_restore(saved_psr);
 	if (slot < 0)
-		return;
+		return -EINVAL;
 
 	spin_lock(&vp_lock);
 	status = ia64_pal_vp_init_env(kvm_vsa_base ?
@@ -145,7 +145,7 @@ void kvm_arch_hardware_enable(void *garbage)
 			__pa(kvm_vm_buffer), KVM_VM_BUFFER_BASE, &tmp_base);
 	if (status != 0) {
 		printk(KERN_WARNING"kvm: Failed to Enable VT Support!!!!\n");
-		return ;
+		return -EINVAL;
 	}
 
 	if (!kvm_vsa_base) {
@@ -154,6 +154,8 @@ void kvm_arch_hardware_enable(void *garbage)
 	}
 	spin_unlock(&vp_lock);
 	ia64_ptr_entry(0x3, slot);
+
+	return 0;
 }
 
 void kvm_arch_hardware_disable(void *garbage)
@@ -851,8 +853,7 @@ static int kvm_vm_ioctl_get_irqchip(struct kvm *kvm,
 	r = 0;
 	switch (chip->chip_id) {
 	case KVM_IRQCHIP_IOAPIC:
-		memcpy(&chip->chip.ioapic, ioapic_irqchip(kvm),
-				sizeof(struct kvm_ioapic_state));
+		r = kvm_get_ioapic(kvm, &chip->chip.ioapic);
 		break;
 	default:
 		r = -EINVAL;
@@ -868,9 +869,7 @@ static int kvm_vm_ioctl_set_irqchip(struct kvm *kvm, struct kvm_irqchip *chip)
 	r = 0;
 	switch (chip->chip_id) {
 	case KVM_IRQCHIP_IOAPIC:
-		memcpy(ioapic_irqchip(kvm),
-				&chip->chip.ioapic,
-				sizeof(struct kvm_ioapic_state));
+		r = kvm_set_ioapic(kvm, &chip->chip.ioapic);
 		break;
 	default:
 		r = -EINVAL;
@@ -944,7 +943,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 {
 	struct kvm *kvm = filp->private_data;
 	void __user *argp = (void __user *)arg;
-	int r = -EINVAL;
+	int r = -ENOTTY;
 
 	switch (ioctl) {
 	case KVM_SET_MEMORY_REGION: {
@@ -985,10 +984,8 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		if (irqchip_in_kernel(kvm)) {
 			__s32 status;
-			mutex_lock(&kvm->irq_lock);
 			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
 				    irq_event.irq, irq_event.level);
-			mutex_unlock(&kvm->irq_lock);
 			if (ioctl == KVM_IRQ_LINE_STATUS) {
 				irq_event.status = status;
 				if (copy_to_user(argp, &irq_event,
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index c0fca2c1c858..df639db779f9 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -131,6 +131,7 @@ alloc_pci_controller (int seg)
 }
 
 struct pci_root_info {
+	struct acpi_device *bridge;
 	struct pci_controller *controller;
 	char *name;
 };
@@ -297,9 +298,20 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
 	window->offset = offset;
 
 	if (insert_resource(root, &window->resource)) {
-		printk(KERN_ERR "alloc 0x%llx-0x%llx from %s for %s failed\n",
-			window->resource.start, window->resource.end,
-			root->name, info->name);
+		dev_err(&info->bridge->dev,
+			"can't allocate host bridge window %pR\n",
+			&window->resource);
+	} else {
+		if (offset)
+			dev_info(&info->bridge->dev, "host bridge window %pR "
+				 "(PCI address [%#llx-%#llx])\n",
+				 &window->resource,
+				 window->resource.start - offset,
+				 window->resource.end - offset);
+		else
+			dev_info(&info->bridge->dev,
+				 "host bridge window %pR\n",
+				 &window->resource);
 	}
 
 	return AE_OK;
@@ -319,8 +331,9 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
 		    (res->end - res->start < 16))
 			continue;
 		if (j >= PCI_BUS_NUM_RESOURCES) {
-			printk("Ignoring range [%#llx-%#llx] (%lx)\n",
-					res->start, res->end, res->flags);
+			dev_warn(&bus->dev,
+				 "ignoring host bridge window %pR (no space)\n",
+				 res);
 			continue;
 		}
 		bus->resource[j++] = res;
@@ -364,6 +377,7 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
 			goto out3;
 
 		sprintf(name, "PCI Bus %04x:%02x", domain, bus);
+		info.bridge = device;
 		info.controller = controller;
 		info.name = name;
 		acpi_walk_resources(device->handle, METHOD_NAME__CRS,
@@ -720,9 +734,6 @@ int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
 	return ret;
 }
 
-/* It's defined in drivers/pci/pci.c */
-extern u8 pci_cache_line_size;
-
 /**
  * set_pci_cacheline_size - determine cacheline size for PCI devices
  *
@@ -731,7 +742,7 @@ extern u8 pci_cache_line_size;
  *
  * Code mostly taken from arch/ia64/kernel/palinfo.c:cache_info().
  */
-static void __init set_pci_cacheline_size(void)
+static void __init set_pci_dfl_cacheline_size(void)
 {
 	unsigned long levels, unique_caches;
 	long status;
@@ -751,7 +762,7 @@ static void __init set_pci_cacheline_size(void)
 			"(status=%ld)\n", __func__, status);
 		return;
 	}
-	pci_cache_line_size = (1 << cci.pcci_line_size) / 4;
+	pci_dfl_cache_line_size = (1 << cci.pcci_line_size) / 4;
 }
 
 u64 ia64_dma_get_required_mask(struct device *dev)
@@ -782,7 +793,7 @@ EXPORT_SYMBOL_GPL(dma_get_required_mask);
 
 static int __init pcibios_init(void)
 {
-	set_pci_cacheline_size();
+	set_pci_dfl_cacheline_size();
 	return 0;
 }
 
diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c
index fd50ff94302b..66f633bff059 100644
--- a/arch/ia64/sn/kernel/io_acpi_init.c
+++ b/arch/ia64/sn/kernel/io_acpi_init.c
@@ -390,7 +390,7 @@ sn_acpi_get_pcidev_info(struct pci_dev *dev, struct pcidev_info **pcidev_info,
 	pcidev_match.handle = NULL;
 
 	acpi_walk_namespace(ACPI_TYPE_DEVICE, rootbus_handle, ACPI_UINT32_MAX,
-			    find_matching_device, &pcidev_match, NULL);
+			    find_matching_device, NULL, &pcidev_match, NULL);
 
 	if (!pcidev_match.handle) {
 		printk(KERN_ERR
diff --git a/arch/m32r/include/asm/cacheflush.h b/arch/m32r/include/asm/cacheflush.h
index 78587c958146..8e8e04516c39 100644
--- a/arch/m32r/include/asm/cacheflush.h
+++ b/arch/m32r/include/asm/cacheflush.h
@@ -12,6 +12,7 @@ extern void _flush_cache_copyback_all(void);
 #define flush_cache_dup_mm(mm)			do { } while (0)
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
@@ -33,6 +34,7 @@ extern void smp_flush_cache_all(void);
 #define flush_cache_dup_mm(mm)			do { } while (0)
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
@@ -46,6 +48,7 @@ extern void smp_flush_cache_all(void);
 #define flush_cache_dup_mm(mm)			do { } while (0)
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/m32r/include/asm/socket.h b/arch/m32r/include/asm/socket.h
index 3390a864f224..469787c30098 100644
--- a/arch/m32r/include/asm/socket.h
+++ b/arch/m32r/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_M32R_SOCKET_H */
diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c
index 305ac852bbed..d3c865c5a6ba 100644
--- a/arch/m32r/kernel/sys_m32r.c
+++ b/arch/m32r/kernel/sys_m32r.c
@@ -76,30 +76,6 @@ asmlinkage int sys_tas(int __user *addr)
 	return oldval;
 }
 
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long pgoff)
-{
-	int error = -EBADF;
-	struct file *file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
 /*
  * sys_ipc() is the de-multiplexer for the SysV IPC calls..
  *
diff --git a/arch/m32r/kernel/syscall_table.S b/arch/m32r/kernel/syscall_table.S
index aa3bf4cfab37..60536e271233 100644
--- a/arch/m32r/kernel/syscall_table.S
+++ b/arch/m32r/kernel/syscall_table.S
@@ -191,7 +191,7 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall		/* streams2 */
 	.long sys_vfork			/* 190 */
 	.long sys_getrlimit
-	.long sys_mmap2
+	.long sys_mmap_pgoff
 	.long sys_truncate64
 	.long sys_ftruncate64
 	.long sys_stat64		/* 195 */
diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S
index 6c1a9a217887..73613b5f1ee5 100644
--- a/arch/m68k/ifpsp060/src/fpsp.S
+++ b/arch/m68k/ifpsp060/src/fpsp.S
@@ -753,7 +753,7 @@ fovfl_ovfl_on:
 
 	bra.l		_real_ovfl
 
-# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
 # we must jump to real_inex().
 fovfl_inex_on:
 
@@ -1015,7 +1015,7 @@ funfl_unfl_on2:
 
 	bra.l		_real_unfl
 
-# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
 # we must jump to real_inex().
 funfl_inex_on:
 
@@ -2963,7 +2963,7 @@ iea_disabled:
 
 	tst.w		%d0			# is instr fmovm?
 	bmi.b		iea_dis_fmovm		# yes
-# instruction is using an extended precision immediate operand. therefore,
+# instruction is using an extended precision immediate operand. Therefore,
 # the total instruction length is 16 bytes.
 iea_dis_immed:
 	mov.l		&0x10,%d0		# 16 bytes of instruction
@@ -9624,7 +9624,7 @@ sok_dnrm:
 	bge.b		sok_norm2		# thank goodness no
 
 # the multiply factor that we're trying to create should be a denorm
-# for the multiply to work. therefore, we're going to actually do a
+# for the multiply to work. Therefore, we're going to actually do a
 # multiply with a denorm which will cause an unimplemented data type
 # exception to be put into the machine which will be caught and corrected
 # later. we don't do this with the DENORMs above because this method
@@ -12216,7 +12216,7 @@ fin_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow or inexact is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fin_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -12746,7 +12746,7 @@ fdiv_zero_load_p:
 
 #
 # The destination was In Range and the source was a ZERO. The result,
-# therefore, is an INF w/ the proper sign.
+# Therefore, is an INF w/ the proper sign.
 # So, determine the sign and return a new INF (w/ the j-bit cleared).
 #
 	global		fdiv_inf_load		# global for fsgldiv
@@ -12996,7 +12996,7 @@ fneg_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fneg_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -13611,7 +13611,7 @@ fabs_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fabs_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -14973,7 +14973,7 @@ fadd_zero_2:
 
 #
 # the ZEROes have opposite signs:
-# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
+# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
 # - -ZERO is returned in the case of RM.
 #
 fadd_zero_2_chk_rm:
@@ -15425,7 +15425,7 @@ fsub_zero_2:
 
 #
 # the ZEROes have the same signs:
-# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
+# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
 # - -ZERO is returned in the case of RM.
 #
 fsub_zero_2_chk_rm:
@@ -15693,7 +15693,7 @@ fsqrt_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fsqrt_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -21000,7 +21000,7 @@ fout_pack_type:
 	tst.l		%d0
 	bne.b		fout_pack_set
 # "mantissa" is all zero which means that the answer is zero. but, the '040
-# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore,
+# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore,
 # if the mantissa is zero, I will zero the exponent, too.
 # the question now is whether the exponents sign bit is allowed to be non-zero
 # for a zero, also...
@@ -21743,7 +21743,7 @@ denorm_set_stky:
 	rts
 
 #									#
-# dnrm_lp(): normalize exponent/mantissa to specified threshhold	#
+# dnrm_lp(): normalize exponent/mantissa to specified threshold		#
 #									#
 # INPUT:								#
 #	%a0	   : points to the operand to be denormalized		#
@@ -22402,7 +22402,7 @@ unnorm_shift:
 	bgt.b		unnorm_nrm_zero		# yes; denorm only until exp = 0
 
 #
-# exponent would not go < 0. therefore, number stays normalized
+# exponent would not go < 0. Therefore, number stays normalized
 #
 	sub.w		%d0, %d1		# shift exponent value
 	mov.w		FTEMP_EX(%a0), %d0	# load old exponent
diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S
index 51b9f7d879dd..e71ba0ab013c 100644
--- a/arch/m68k/ifpsp060/src/pfpsp.S
+++ b/arch/m68k/ifpsp060/src/pfpsp.S
@@ -752,7 +752,7 @@ fovfl_ovfl_on:
 
 	bra.l		_real_ovfl
 
-# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
 # we must jump to real_inex().
 fovfl_inex_on:
 
@@ -1014,7 +1014,7 @@ funfl_unfl_on2:
 
 	bra.l		_real_unfl
 
-# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
 # we must jump to real_inex().
 funfl_inex_on:
 
@@ -2962,7 +2962,7 @@ iea_disabled:
 
 	tst.w		%d0			# is instr fmovm?
 	bmi.b		iea_dis_fmovm		# yes
-# instruction is using an extended precision immediate operand. therefore,
+# instruction is using an extended precision immediate operand. Therefore,
 # the total instruction length is 16 bytes.
 iea_dis_immed:
 	mov.l		&0x10,%d0		# 16 bytes of instruction
@@ -5865,7 +5865,7 @@ denorm_set_stky:
 	rts
 
 #									#
-# dnrm_lp(): normalize exponent/mantissa to specified threshhold	#
+# dnrm_lp(): normalize exponent/mantissa to specified threshold		#
 #									#
 # INPUT:								#
 #	%a0	   : points to the operand to be denormalized		#
@@ -6524,7 +6524,7 @@ unnorm_shift:
 	bgt.b		unnorm_nrm_zero		# yes; denorm only until exp = 0
 
 #
-# exponent would not go < 0. therefore, number stays normalized
+# exponent would not go < 0. Therefore, number stays normalized
 #
 	sub.w		%d0, %d1		# shift exponent value
 	mov.w		FTEMP_EX(%a0), %d0	# load old exponent
@@ -7901,7 +7901,7 @@ fout_pack_type:
 	tst.l		%d0
 	bne.b		fout_pack_set
 # "mantissa" is all zero which means that the answer is zero. but, the '040
-# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore,
+# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore,
 # if the mantissa is zero, I will zero the exponent, too.
 # the question now is whether the exponents sign bit is allowed to be non-zero
 # for a zero, also...
@@ -8647,7 +8647,7 @@ fin_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow or inexact is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fin_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -9177,7 +9177,7 @@ fdiv_zero_load_p:
 
 #
 # The destination was In Range and the source was a ZERO. The result,
-# therefore, is an INF w/ the proper sign.
+# Therefore, is an INF w/ the proper sign.
 # So, determine the sign and return a new INF (w/ the j-bit cleared).
 #
 	global		fdiv_inf_load		# global for fsgldiv
@@ -9427,7 +9427,7 @@ fneg_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fneg_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -10042,7 +10042,7 @@ fabs_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fabs_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -11404,7 +11404,7 @@ fadd_zero_2:
 
 #
 # the ZEROes have opposite signs:
-# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
+# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
 # - -ZERO is returned in the case of RM.
 #
 fadd_zero_2_chk_rm:
@@ -11856,7 +11856,7 @@ fsub_zero_2:
 
 #
 # the ZEROes have the same signs:
-# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
+# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
 # - -ZERO is returned in the case of RM.
 #
 fsub_zero_2_chk_rm:
@@ -12124,7 +12124,7 @@ fsqrt_sd_unfl_dis:
 
 #
 # operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
 #
 fsqrt_sd_unfl_ena:
 	mov.l		FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h
index fb8a06b9ab6a..67e7a78ad96b 100644
--- a/arch/m68k/include/asm/bootinfo.h
+++ b/arch/m68k/include/asm/bootinfo.h
@@ -145,7 +145,7 @@ struct bi_record {
 
     /*
      *  Macintosh hardware profile data - unused, see macintosh.h for
-     *  resonable type values
+     *  reasonable type values
      */
 
 #define BI_MAC_VIA1BASE		0x8010	/* Mac VIA1 base address (always present) */
diff --git a/arch/m68k/include/asm/cacheflush_mm.h b/arch/m68k/include/asm/cacheflush_mm.h
index 16bf375fdbe1..73de7c89d8e0 100644
--- a/arch/m68k/include/asm/cacheflush_mm.h
+++ b/arch/m68k/include/asm/cacheflush_mm.h
@@ -128,6 +128,7 @@ static inline void __flush_page_to_ram(void *vaddr)
 	}
 }
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 #define flush_dcache_page(page)		__flush_page_to_ram(page_address(page))
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/m68k/include/asm/cacheflush_no.h b/arch/m68k/include/asm/cacheflush_no.h
index c65f00a94553..89f195656be7 100644
--- a/arch/m68k/include/asm/cacheflush_no.h
+++ b/arch/m68k/include/asm/cacheflush_no.h
@@ -12,6 +12,7 @@
 #define flush_cache_range(vma, start, end)	__flush_cache_all()
 #define flush_cache_page(vma, vmaddr)		do { } while (0)
 #define flush_dcache_range(start,len)		__flush_cache_all()
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index 74fd674b15ad..cbd3d4751dd2 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -165,6 +165,8 @@ unsigned long get_wchan(struct task_struct *p);
 	eip; })
 #define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
 
+#define task_pt_regs(tsk)	((struct pt_regs *) ((tsk)->thread.esp0))
+
 #define cpu_relax()	barrier()
 
 #endif
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index 8c9194b98548..ee4011c23281 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -71,6 +71,8 @@ struct switch_stack {
 #define PTRACE_GETFPREGS          14
 #define PTRACE_SETFPREGS          15
 
+#define PTRACE_SINGLEBLOCK	33	/* resume execution until next branch */
+
 #ifdef __KERNEL__
 
 #ifndef PS_S
@@ -82,6 +84,21 @@ struct switch_stack {
 #define instruction_pointer(regs) ((regs)->pc)
 #define profile_pc(regs) instruction_pointer(regs)
 extern void show_regs(struct pt_regs *);
+
+/*
+ * These are defined as per linux/ptrace.h.
+ */
+struct task_struct;
+
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
+#ifdef CONFIG_MMU
+#define arch_has_block_step()	(1)
+extern void user_enable_block_step(struct task_struct *);
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* __ASSEMBLY__ */
 #endif /* _M68K_PTRACE_H */
diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h
index eee01cce921b..9bf49c87d954 100644
--- a/arch/m68k/include/asm/socket.h
+++ b/arch/m68k/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h
index b6da3882be9b..167e518db41b 100644
--- a/arch/m68k/include/asm/thread_info_mm.h
+++ b/arch/m68k/include/asm/thread_info_mm.h
@@ -4,10 +4,12 @@
 #ifndef ASM_OFFSETS_C
 #include <asm/asm-offsets.h>
 #endif
-#include <asm/current.h>
 #include <asm/types.h>
 #include <asm/page.h>
 
+#ifndef __ASSEMBLY__
+#include <asm/current.h>
+
 struct thread_info {
 	struct task_struct	*task;		/* main task structure */
 	unsigned long		flags;
@@ -16,6 +18,7 @@ struct thread_info {
 	__u32 cpu; /* should always be 0 on m68k */
 	struct restart_block    restart_block;
 };
+#endif /* __ASSEMBLY__ */
 
 #define PREEMPT_ACTIVE		0x4000000
 
diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h
index c2bde5e24b0b..a6512bfdd01d 100644
--- a/arch/m68k/include/asm/thread_info_no.h
+++ b/arch/m68k/include/asm/thread_info_no.h
@@ -12,8 +12,6 @@
 
 #ifdef __KERNEL__
 
-#ifndef __ASSEMBLY__
-
 /*
  * Size of kernel stack for each process. This must be a power of 2...
  */
@@ -28,6 +26,8 @@
  */
 #define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
 
+#ifndef __ASSEMBLY__
+
 /*
  * low level task data.
  */
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index c5b33634c980..77fc7c16bf48 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -179,7 +179,11 @@ do_signal_return:
 	addql	#8,%sp
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
-	jbra	resume_userspace
+	tstl	%d0
+	jeq	resume_userspace
+	| when single stepping into handler stop at the first insn
+	btst	#6,%curptr@(TASK_INFO+TINFO_FLAGS+2)
+	jeq	resume_userspace
 
 do_delayed_trace:
 	bclr	#7,%sp@(PT_OFF_SR)	| clear trace bit in SR
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 41230c595a8e..05296593e718 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -317,15 +317,12 @@ asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __
 	char * filename;
 	struct pt_regs *regs = (struct pt_regs *) &name;
 
-	lock_kernel();
 	filename = getname(name);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
-		goto out;
+		return error;
 	error = do_execve(filename, argv, envp, regs);
 	putname(filename);
-out:
-	unlock_kernel();
 	return error;
 }
 
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index 2075543c2d92..1fc217e5f06b 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -35,7 +35,9 @@
 #define SR_MASK 0x001f
 
 /* sets the trace bits. */
-#define TRACE_BITS 0x8000
+#define TRACE_BITS 0xC000
+#define T1_BIT 0x8000
+#define T0_BIT 0x4000
 
 /* Find the stack offset for a register, relative to thread.esp0. */
 #define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
@@ -44,7 +46,7 @@
 /* Mapping from PT_xxx to the stack offset at which the register is
    saved.  Notice that usp has no stack-slot and needs to be treated
    specially (see get_reg/put_reg below). */
-static int regoff[] = {
+static const int regoff[] = {
 	[0]	= PT_REG(d1),
 	[1]	= PT_REG(d2),
 	[2]	= PT_REG(d3),
@@ -79,6 +81,14 @@ static inline long get_reg(struct task_struct *task, int regno)
 		addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
 	else
 		return 0;
+	/* Need to take stkadj into account. */
+	if (regno == PT_SR || regno == PT_PC) {
+		long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
+		addr = (unsigned long *) ((unsigned long)addr + stkadj);
+		/* The sr is actually a 16 bit register.  */
+		if (regno == PT_SR)
+			return *(unsigned short *)addr;
+	}
 	return *addr;
 }
 
@@ -96,6 +106,16 @@ static inline int put_reg(struct task_struct *task, int regno,
 		addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
 	else
 		return -1;
+	/* Need to take stkadj into account. */
+	if (regno == PT_SR || regno == PT_PC) {
+		long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
+		addr = (unsigned long *) ((unsigned long)addr + stkadj);
+		/* The sr is actually a 16 bit register.  */
+		if (regno == PT_SR) {
+			*(unsigned short *)addr = data;
+			return 0;
+		}
+	}
 	*addr = data;
 	return 0;
 }
@@ -105,7 +125,7 @@ static inline int put_reg(struct task_struct *task, int regno,
  */
 static inline void singlestep_disable(struct task_struct *child)
 {
-	unsigned long tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
+	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
 	put_reg(child, PT_SR, tmp);
 	clear_tsk_thread_flag(child, TIF_DELAYED_TRACE);
 }
@@ -118,18 +138,30 @@ void ptrace_disable(struct task_struct *child)
 	singlestep_disable(child);
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
+	put_reg(child, PT_SR, tmp | T1_BIT);
+	set_tsk_thread_flag(child, TIF_DELAYED_TRACE);
+}
+
+void user_enable_block_step(struct task_struct *child)
+{
+	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
+	put_reg(child, PT_SR, tmp | T0_BIT);
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	singlestep_disable(child);
+}
+
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	unsigned long tmp;
 	int i, ret = 0;
 
 	switch (request) {
-	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT:	/* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR:
 		if (addr & 3)
@@ -138,8 +170,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 		if (addr >= 0 && addr < 19) {
 			tmp = get_reg(child, addr);
-			if (addr == PT_SR)
-				tmp >>= 16;
 		} else if (addr >= 21 && addr < 49) {
 			tmp = child->thread.fp[addr - 21];
 			/* Convert internal fpu reg representation
@@ -149,16 +179,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				tmp = ((tmp & 0xffff0000) << 15) |
 				      ((tmp & 0x0000ffff) << 16);
 		} else
-			break;
+			goto out_eio;
 		ret = put_user(tmp, (unsigned long *)data);
 		break;
 
-	/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT:	/* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	case PTRACE_POKEUSR:	/* write the word at location addr in the USER area */
 		if (addr & 3)
 			goto out_eio;
@@ -166,9 +190,9 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 		if (addr == PT_SR) {
 			data &= SR_MASK;
-			data <<= 16;
-			data |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
-		} else if (addr >= 0 && addr < 19) {
+			data |= get_reg(child, PT_SR) & ~SR_MASK;
+		}
+		if (addr >= 0 && addr < 19) {
 			if (put_reg(child, addr, data))
 				goto out_eio;
 		} else if (addr >= 21 && addr < 48) {
@@ -185,52 +209,9 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			goto out_eio;
 		break;
 
-	case PTRACE_SYSCALL:	/* continue and stop at next (return from) syscall */
-	case PTRACE_CONT:	/* restart after signal. */
-		if (!valid_signal(data))
-			goto out_eio;
-
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		singlestep_disable(child);
-		wake_up_process(child);
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		if (child->exit_state == EXIT_ZOMBIE) /* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		singlestep_disable(child);
-		wake_up_process(child);
-		break;
-
-	case PTRACE_SINGLESTEP:	/* set the trap flag. */
-		if (!valid_signal(data))
-			goto out_eio;
-
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16);
-		put_reg(child, PT_SR, tmp);
-		set_tsk_thread_flag(child, TIF_DELAYED_TRACE);
-
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		break;
-
 	case PTRACE_GETREGS:	/* Get all gp regs from the child. */
 		for (i = 0; i < 19; i++) {
 			tmp = get_reg(child, i);
-			if (i == PT_SR)
-				tmp >>= 16;
 			ret = put_user(tmp, (unsigned long *)data);
 			if (ret)
 				break;
@@ -245,8 +226,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				break;
 			if (i == PT_SR) {
 				tmp &= SR_MASK;
-				tmp <<= 16;
-				tmp |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
+				tmp |= get_reg(child, PT_SR) & ~SR_MASK;
 			}
 			put_reg(child, i, tmp);
 			data += sizeof(long);
diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c
index 7deb402bfc75..218f441de667 100644
--- a/arch/m68k/kernel/sys_m68k.c
+++ b/arch/m68k/kernel/sys_m68k.c
@@ -29,37 +29,16 @@
 #include <asm/page.h>
 #include <asm/unistd.h>
 
-/* common code for old and new mmaps */
-static inline long do_mmap2(
-	unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long pgoff)
-{
-	int error = -EBADF;
-	struct file * file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags,
 	unsigned long fd, unsigned long pgoff)
 {
-	return do_mmap2(addr, len, prot, flags, fd, pgoff);
+	/*
+	 * This is wrong for sun3 - there PAGE_SIZE is 8Kb,
+	 * so we need to shift the argument down by 1; m68k mmap64(3)
+	 * (in libc) expects the last argument of mmap2 in 4Kb units.
+	 */
+	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 }
 
 /*
@@ -90,57 +69,11 @@ asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
 	if (a.offset & ~PAGE_MASK)
 		goto out;
 
-	a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-#if 0
-struct mmap_arg_struct64 {
-	__u32 addr;
-	__u32 len;
-	__u32 prot;
-	__u32 flags;
-	__u64 offset; /* 64 bits */
-	__u32 fd;
-};
-
-asmlinkage long sys_mmap64(struct mmap_arg_struct64 *arg)
-{
-	int error = -EFAULT;
-	struct file * file = NULL;
-	struct mmap_arg_struct64 a;
-	unsigned long pgoff;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-
-	if ((long)a.offset & ~PAGE_MASK)
-		return -EINVAL;
-
-	pgoff = a.offset >> PAGE_SHIFT;
-	if ((a.offset >> PAGE_SHIFT) != pgoff)
-		return -EINVAL;
-
-	if (!(a.flags & MAP_ANONYMOUS)) {
-		error = -EBADF;
-		file = fget(a.fd);
-		if (!file)
-			goto out;
-	}
-	a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-	if (file)
-		fput(file);
+	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
+			       a.offset >> PAGE_SHIFT);
 out:
 	return error;
 }
-#endif
 
 struct sel_arg_struct {
 	unsigned long n;
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 47eac19e8f61..878be5f38cad 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -2,6 +2,7 @@
 
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
 OUTPUT_ARCH(m68k)
@@ -22,73 +23,37 @@ SECTIONS
 
   _etext = .;			/* End of text section */
 
-  . = ALIGN(16);		/* Exception table */
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
+  EXCEPTION_TABLE(16)
 
   RODATA
 
-  .data : {			/* Data */
-	DATA_DATA
-	CONSTRUCTORS
-	}
+  RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
 
-  . = ALIGN(16);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
-  .bss : { *(.bss) }		/* BSS */
+  BSS_SECTION(0, 0, 0)
 
   _edata = .;			/* End of data section */
 
   /* will be freed after init */
   . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  } :data
-  .init.data : { INIT_DATA }
-  . = ALIGN(16);
-  __setup_start = .;
-  .init.setup : { *(.init.setup) }
-  __setup_end = .;
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
+  INIT_TEXT_SECTION(PAGE_SIZE) :data
+  INIT_DATA_SECTION(16)
   .m68k_fixup : {
 	__start_fixup = .;
 	*(.m68k_fixup)
 	__stop_fixup = .;
   }
-  SECURITY_INIT
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(8192);
-  __initramfs_start = .;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
   NOTES
-  . = ALIGN(8192);
-  __init_end = .;
-
-  .data.init_task : { *(.data.init_task) }	/* The initial task and kernel stack */
+  .init_end : {
+	/* This ALIGN be in a section so that _end is at the end of the
+	   load segment. */
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
+  }
 
   _end = . ;
 
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
+  STABS_DEBUG
   .comment 0 : { *(.comment) }
 
   /* Sections to be discarded */
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index 03efaf04d7d7..1ad6b7ad2c17 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -2,6 +2,7 @@
 
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
 OUTPUT_ARCH(m68k)
@@ -23,14 +24,8 @@ SECTIONS
 
   _etext = .;			/* End of text section */
 
-  .data : {			/* Data */
-	DATA_DATA
-	CONSTRUCTORS
-	. = ALIGN(16);		/* Exception table */
-	__start___ex_table = .;
-	*(__ex_table)
-	__stop___ex_table = .;
-	} :data
+  EXCEPTION_TABLE(16) :data
+  RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE) :data
   /* End of data goes *here* so that freeing init code works properly. */
   _edata = .;
   NOTES
@@ -38,56 +33,21 @@ SECTIONS
   /* will be freed after init */
   . = ALIGN(PAGE_SIZE);	/* Init code and data */
 __init_begin = .;
-	.init.text : {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-	.init.data : { INIT_DATA }
-	. = ALIGN(16);
-	__setup_start = .;
-	.init.setup : { *(.init.setup) }
-	__setup_end = .;
-	__initcall_start = .;
-	.initcall.init : {
-		INITCALLS
-	}
-	__initcall_end = .;
-	__con_initcall_start = .;
-	.con_initcall.init : { *(.con_initcall.init) }
-	__con_initcall_end = .;
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
 	.m68k_fixup : {
 		__start_fixup = .;
 		*(.m68k_fixup)
 		__stop_fixup = .;
 	}
-	SECURITY_INIT
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	__initramfs_start = .;
-	.init.ramfs : { *(.init.ramfs) }
-	__initramfs_end = .;
-#endif
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
-	.data.init.task : { *(.data.init_task) }
-
 
-  .bss : { *(.bss) }		/* BSS */
+  BSS_SECTION(0, 0, 0)
 
   _end = . ;
 
-  .crap : {
-	/* Stabs debugging sections.  */
-	*(.stab)
-	*(.stabstr)
-	*(.stab.excl)
-	*(.stab.exclstr)
-	*(.stab.index)
-	*(.stab.indexstr)
-	*(.comment)
-	*(.note)
-  }
+  STABS_DEBUG
 
   /* Sections to be discarded */
   DISCARDS
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index e2201b90aa22..064f5913db1a 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -533,6 +533,13 @@ config AVNET
 	default y
 	depends on (AVNET5282)
 
+config UBOOT
+	bool "Support for U-Boot command line parameters"
+	help
+	  If you say Y here kernel will try to collect command
+	  line parameters from the initial u-boot stack.
+	default n
+
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
 	default y
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 8f8f4abab2ff..5c9ecd427090 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -352,15 +352,12 @@ asmlinkage int sys_execve(char *name, char **argv, char **envp)
 	char * filename;
 	struct pt_regs *regs = (struct pt_regs *) &name;
 
-	lock_kernel();
 	filename = getname(name);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
-		goto out;
+		return error;
 	error = do_execve(filename, argv, envp, regs);
 	putname(filename);
-out:
-	unlock_kernel();
 	return error;
 }
 
diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c
index ef70ca070ce2..4d3828959fb0 100644
--- a/arch/m68knommu/kernel/ptrace.c
+++ b/arch/m68knommu/kernel/ptrace.c
@@ -86,6 +86,20 @@ static inline int put_reg(struct task_struct *task, int regno,
 	return 0;
 }
 
+void user_enable_single_step(struct task_struct *task)
+{
+	unsigned long srflags;
+	srflags = get_reg(task, PT_SR) | (TRACE_BITS << 16);
+	put_reg(task, PT_SR, srflags);
+}
+
+void user_disable_single_step(struct task_struct *task)
+{
+	unsigned long srflags;
+	srflags = get_reg(task, PT_SR) & ~(TRACE_BITS << 16);
+	put_reg(task, PT_SR, srflags);
+}
+
 /*
  * Called by kernel/ptrace.c when detaching..
  *
@@ -93,10 +107,8 @@ static inline int put_reg(struct task_struct *task, int regno,
  */
 void ptrace_disable(struct task_struct *child)
 {
-	unsigned long tmp;
 	/* make sure the single step bit is not set. */
-	tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
-	put_reg(child, PT_SR, tmp);
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index 5c2bb3eeaaa2..ba92b90d5fbc 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -29,6 +29,8 @@
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
 #include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/root_dev.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -52,7 +54,6 @@ void (*mach_reset)(void);
 void (*mach_halt)(void);
 void (*mach_power_off)(void);
 
-
 #ifdef CONFIG_M68000
 	#define CPU "MC68000"
 #endif
@@ -111,6 +112,69 @@ void (*mach_power_off)(void);
 extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
 extern int _ramstart, _ramend;
 
+#if defined(CONFIG_UBOOT)
+/*
+ * parse_uboot_commandline
+ *
+ * Copies u-boot commandline arguments and store them in the proper linux
+ * variables.
+ *
+ * Assumes:
+ *	_init_sp global contains the address in the stack pointer when the
+ *	kernel starts (see head.S::_start)
+ *
+ *	U-Boot calling convention:
+ *	(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
+ *
+ *	_init_sp can be parsed as such
+ *
+ *	_init_sp+00 = u-boot cmd after jsr into kernel (skip)
+ *	_init_sp+04 = &kernel board_info (residual data)
+ *	_init_sp+08 = &initrd_start
+ *	_init_sp+12 = &initrd_end
+ *	_init_sp+16 = &cmd_start
+ *	_init_sp+20 = &cmd_end
+ *
+ *	This also assumes that the memory locations pointed to are still
+ *	unmodified. U-boot places them near the end of external SDRAM.
+ *
+ * Argument(s):
+ *	commandp = the linux commandline arg container to fill.
+ *	size     = the sizeof commandp.
+ *
+ * Returns:
+ */
+void parse_uboot_commandline(char *commandp, int size)
+{
+	extern unsigned long _init_sp;
+	unsigned long *sp;
+	unsigned long uboot_kbd;
+	unsigned long uboot_initrd_start, uboot_initrd_end;
+	unsigned long uboot_cmd_start, uboot_cmd_end;
+
+
+	sp = (unsigned long *)_init_sp;
+	uboot_kbd = sp[1];
+	uboot_initrd_start = sp[2];
+	uboot_initrd_end = sp[3];
+	uboot_cmd_start = sp[4];
+	uboot_cmd_end = sp[5];
+
+	if (uboot_cmd_start && uboot_cmd_end)
+		strncpy(commandp, (const char *)uboot_cmd_start, size);
+#if defined(CONFIG_BLK_DEV_INITRD)
+	if (uboot_initrd_start && uboot_initrd_end &&
+		(uboot_initrd_end > uboot_initrd_start)) {
+		initrd_start = uboot_initrd_start;
+		initrd_end = uboot_initrd_end;
+		ROOT_DEV = Root_RAM0;
+		printk(KERN_INFO "initrd at 0x%lx:0x%lx\n",
+			initrd_start, initrd_end);
+	}
+#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
+}
+#endif /* #if defined(CONFIG_UBOOT) */
+
 void __init setup_arch(char **cmdline_p)
 {
 	int bootmap_size;
@@ -128,7 +192,24 @@ void __init setup_arch(char **cmdline_p)
 #if defined(CONFIG_BOOTPARAM)
 	strncpy(&command_line[0], CONFIG_BOOTPARAM_STRING, sizeof(command_line));
 	command_line[sizeof(command_line) - 1] = 0;
-#endif
+#endif /* CONFIG_BOOTPARAM */
+
+#if defined(CONFIG_UBOOT)
+	/* CONFIG_UBOOT and CONFIG_BOOTPARAM defined, concatenate cmdline */
+	#if defined(CONFIG_BOOTPARAM)
+		/* Add the whitespace separator */
+		command_line[strlen(CONFIG_BOOTPARAM_STRING)] = ' ';
+		/* Parse uboot command line into the rest of the buffer */
+		parse_uboot_commandline(
+			&command_line[(strlen(CONFIG_BOOTPARAM_STRING)+1)],
+			(sizeof(command_line) -
+			(strlen(CONFIG_BOOTPARAM_STRING)+1)));
+	/* Only CONFIG_UBOOT defined, create cmdline */
+	#else
+		parse_uboot_commandline(&command_line[0], sizeof(command_line));
+	#endif /* CONFIG_BOOTPARAM */
+	command_line[sizeof(command_line) - 1] = 0;
+#endif /* CONFIG_UBOOT */
 
 	printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU "\n");
 
@@ -204,6 +285,13 @@ void __init setup_arch(char **cmdline_p)
 	free_bootmem(memory_start, memory_end - memory_start);
 	reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
 
+#if defined(CONFIG_UBOOT) && defined(CONFIG_BLK_DEV_INITRD)
+	if ((initrd_start > 0) && (initrd_start < initrd_end) &&
+			(initrd_end < memory_end))
+		reserve_bootmem(initrd_start, initrd_end - initrd_start,
+				 BOOTMEM_DEFAULT);
+#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
+
 	/*
 	 * Get kmalloc into gear.
 	 */
diff --git a/arch/m68knommu/kernel/sys_m68k.c b/arch/m68knommu/kernel/sys_m68k.c
index efdd090778a3..b67cbc735a9b 100644
--- a/arch/m68knommu/kernel/sys_m68k.c
+++ b/arch/m68knommu/kernel/sys_m68k.c
@@ -27,39 +27,6 @@
 #include <asm/cacheflush.h>
 #include <asm/unistd.h>
 
-/* common code for old and new mmaps */
-static inline long do_mmap2(
-	unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long pgoff)
-{
-	int error = -EBADF;
-	struct file * file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long pgoff)
-{
-	return do_mmap2(addr, len, prot, flags, fd, pgoff);
-}
-
 /*
  * Perform the select(nd, in, out, ex, tv) and mmap() system
  * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
@@ -88,9 +55,8 @@ asmlinkage int old_mmap(struct mmap_arg_struct *arg)
 	if (a.offset & ~PAGE_MASK)
 		goto out;
 
-	a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
+	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
+				a.offset >> PAGE_SHIFT);
 out:
 	return error;
 }
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index 23535cc415ae..486837efa3d7 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -210,7 +210,7 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall	/* streams2 */
 	.long sys_vfork		/* 190 */
 	.long sys_getrlimit
-	.long sys_mmap2
+	.long sys_mmap_pgoff
 	.long sys_truncate64
 	.long sys_ftruncate64
 	.long sys_stat64	/* 195 */
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 2736a5e309c0..9f1784f586b9 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -8,6 +8,8 @@
  */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
 
 #if defined(CONFIG_RAMKERNEL)
 #define	RAM_START	CONFIG_KERNELBASE
@@ -15,7 +17,7 @@
 #define	TEXT		ram
 #define	DATA		ram
 #define	INIT		ram
-#define	BSS		ram
+#define	BSSS		ram
 #endif
 #if defined(CONFIG_ROMKERNEL) || defined(CONFIG_HIMEMKERNEL)
 #define	RAM_START	CONFIG_RAMBASE
@@ -27,7 +29,7 @@
 #define	TEXT		rom
 #define	DATA		ram
 #define	INIT		ram
-#define	BSS		ram
+#define	BSSS		ram
 #endif
 
 #ifndef DATA_ADDR
@@ -147,40 +149,19 @@ SECTIONS {
 		. = ALIGN(4);
 		_sdata = . ;
 		DATA_DATA
-		. = ALIGN(32);
-		*(.data.cacheline_aligned)
-		. = ALIGN(8192) ;
-		*(.data.init_task)
+		CACHELINE_ALIGNED_DATA(32)
+		INIT_TASK_DATA(THREAD_SIZE)
 		_edata = . ;
 	} > DATA
 
-	.init : {
-		. = ALIGN(4096);
+	.init.text : {
+		. = ALIGN(PAGE_SIZE);
 		__init_begin = .;
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-		INIT_DATA
-		. = ALIGN(16);
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-		__security_initcall_start = .;
-		*(.security_initcall.init)
-		__security_initcall_end = .;
-#ifdef CONFIG_BLK_DEV_INITRD
-		. = ALIGN(4);
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-#endif
-		. = ALIGN(4096);
+	} > INIT
+	INIT_TEXT_SECTION(PAGE_SIZE) > INIT
+	INIT_DATA_SECTION(16) > INIT
+	.init.data : {
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 	} > INIT
 
@@ -192,7 +173,7 @@ SECTIONS {
 		. = ALIGN(4) ;
 		_ebss = . ;
 	 	_end = . ;
-	} > BSS
+	} > BSSS
 
 	DISCARDS
 }
diff --git a/arch/m68knommu/platform/523x/gpio.c b/arch/m68knommu/platform/523x/gpio.c
index f02840d54d3c..a8842dc27839 100644
--- a/arch/m68knommu/platform/523x/gpio.c
+++ b/arch/m68knommu/platform/523x/gpio.c
@@ -30,7 +30,8 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.direction_output	= mcf_gpio_direction_output,
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value,
-			.ngpio			= 8,
+			.base			= 1,
+			.ngpio			= 7,
 		},
 		.pddr				= MCFEPORT_EPDDR,
 		.podr				= MCFEPORT_EPDR,
@@ -244,7 +245,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value_fast,
 			.base			= 96,
-			.ngpio			= 4,
+			.ngpio			= 8,
 		},
 		.pddr				= MCFGPIO_PDDR_TIMER,
 		.podr				= MCFGPIO_PODR_TIMER,
diff --git a/arch/m68knommu/platform/527x/gpio.c b/arch/m68knommu/platform/527x/gpio.c
index 1028142851ac..0b56e19db0f8 100644
--- a/arch/m68knommu/platform/527x/gpio.c
+++ b/arch/m68knommu/platform/527x/gpio.c
@@ -31,7 +31,8 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.direction_output	= mcf_gpio_direction_output,
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value,
-			.ngpio			= 8,
+			.base			= 1,
+			.ngpio			= 7,
 		},
 		.pddr				= MCFEPORT_EPDDR,
 		.podr				= MCFEPORT_EPDR,
@@ -263,7 +264,8 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.direction_output	= mcf_gpio_direction_output,
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value,
-			.ngpio			= 8,
+			.base			= 1,
+			.ngpio			= 7,
 		},
 		.pddr				= MCFEPORT_EPDDR,
 		.podr				= MCFEPORT_EPDR,
diff --git a/arch/m68knommu/platform/528x/gpio.c b/arch/m68knommu/platform/528x/gpio.c
index ec593950696a..eedaf0adbcd7 100644
--- a/arch/m68knommu/platform/528x/gpio.c
+++ b/arch/m68knommu/platform/528x/gpio.c
@@ -31,7 +31,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value,
 			.base			= 1,
-			.ngpio			= 8,
+			.ngpio			= 7,
 		},
 		.pddr				= MCFEPORT_EPDDR,
 		.podr				= MCFEPORT_EPDR,
diff --git a/arch/m68knommu/platform/coldfire/clk.c b/arch/m68knommu/platform/coldfire/clk.c
index 7cdbf445b28f..9f1260c5e2ad 100644
--- a/arch/m68knommu/platform/coldfire/clk.c
+++ b/arch/m68knommu/platform/coldfire/clk.c
@@ -9,6 +9,7 @@
 /***************************************************************************/
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/clk.h>
 #include <asm/coldfire.h>
 
@@ -18,23 +19,27 @@ struct clk *clk_get(struct device *dev, const char *id)
 {
 	return NULL;
 }
+EXPORT_SYMBOL(clk_get);
 
 int clk_enable(struct clk *clk)
 {
 	return 0;
 }
+EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_disable);
 
 void clk_put(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_put);
 
 unsigned long clk_get_rate(struct clk *clk)
 {
 	return MCF_CLK;
 }
-
+EXPORT_SYMBOL(clk_get_rate);
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S
index 2b0d73c0cc32..4b91aa24eb00 100644
--- a/arch/m68knommu/platform/coldfire/head.S
+++ b/arch/m68knommu/platform/coldfire/head.S
@@ -106,6 +106,9 @@
 .global _ramvec
 .global	_ramstart
 .global	_ramend
+#if defined(CONFIG_UBOOT)
+.global	_init_sp
+#endif
 
 /*****************************************************************************/
 
@@ -124,6 +127,10 @@ _ramstart:
 .long	0
 _ramend:
 .long	0
+#if defined(CONFIG_UBOOT)
+_init_sp:
+.long	0
+#endif
 
 /*****************************************************************************/
 
@@ -137,6 +144,9 @@ __HEAD
 _start:
 	nop					/* filler */
 	movew	#0x2700, %sr			/* no interrupts */
+#if defined(CONFIG_UBOOT)
+	movel	%sp,_init_sp			/* save initial stack pointer */
+#endif
 
 	/*
 	 *	Do any platform or board specific setup now. Most boards
diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h
index f989d6aad648..088076e657b3 100644
--- a/arch/microblaze/include/asm/cacheflush.h
+++ b/arch/microblaze/include/asm/cacheflush.h
@@ -37,6 +37,7 @@
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
 
 #define flush_dcache_range(start, end)	__invalidate_dcache_range(start, end)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 37e6f305a68e..ef3ec1d6ceb3 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -12,23 +12,15 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/of.h>	/* linux/of.h gets to determine #include ordering */
+
 #ifndef _ASM_MICROBLAZE_PROM_H
 #define _ASM_MICROBLAZE_PROM_H
 #ifdef __KERNEL__
-
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER		0xd00dfeed /* marker */
-#define OF_DT_BEGIN_NODE	0x1 /* Start of node, full name */
-#define OF_DT_END_NODE		0x2 /* End node */
-#define OF_DT_PROP		0x3 /* Property: name off, size, content */
-#define OF_DT_NOP		0x4 /* nop */
-#define OF_DT_END		0x9
-
-#define OF_DT_VERSION		0x10
-
 #ifndef __ASSEMBLY__
 
 #include <linux/types.h>
+#include <linux/of_fdt.h>
 #include <linux/proc_fs.h>
 #include <linux/platform_device.h>
 #include <asm/irq.h>
@@ -41,122 +33,19 @@
 #define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
 #define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
 
-/*
- * This is what gets passed to the kernel by prom_init or kexec
- *
- * The dt struct contains the device tree structure, full pathes and
- * property contents. The dt strings contain a separate block with just
- * the strings for the property names, and is fully page aligned and
- * self contained in a page, so that it can be kept around by the kernel,
- * each property name appears only once in this page (cheap compression)
- *
- * the mem_rsvmap contains a map of reserved ranges of physical memory,
- * passing it here instead of in the device-tree itself greatly simplifies
- * the job of everybody. It's just a list of u64 pairs (base/size) that
- * ends when size is 0
- */
-struct boot_param_header {
-	u32	magic; /* magic word OF_DT_HEADER */
-	u32	totalsize; /* total size of DT block */
-	u32	off_dt_struct; /* offset to structure */
-	u32	off_dt_strings; /* offset to strings */
-	u32	off_mem_rsvmap; /* offset to memory reserve map */
-	u32	version; /* format version */
-	u32	last_comp_version; /* last compatible version */
-	/* version 2 fields below */
-	u32	boot_cpuid_phys; /* Physical CPU id we're booting on */
-	/* version 3 fields below */
-	u32	dt_strings_size; /* size of the DT strings block */
-	/* version 17 fields below */
-	u32	dt_struct_size; /* size of the DT structure block */
-};
-
-typedef u32 phandle;
-typedef u32 ihandle;
-
-struct property {
-	char	*name;
-	int	length;
-	void	*value;
-	struct property *next;
-};
-
-struct device_node {
-	const char *name;
-	const char *type;
-	phandle	node;
-	phandle linux_phandle;
-	char	*full_name;
-
-	struct	property *properties;
-	struct	property *deadprops; /* removed properties */
-	struct	device_node *parent;
-	struct	device_node *child;
-	struct	device_node *sibling;
-	struct	device_node *next; /* next device of same type */
-	struct	device_node *allnext; /* next in list of all nodes */
-	struct	proc_dir_entry *pde; /* this node's proc directory */
-	struct	kref kref;
-	unsigned long _flags;
-	void	*data;
-};
-
 extern struct device_node *of_chosen;
 
-static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
-{
-	return test_bit(flag, &n->_flags);
-}
-
-static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
-{
-	set_bit(flag, &n->_flags);
-}
-
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
-static inline void set_node_proc_entry(struct device_node *dn,
-					struct proc_dir_entry *de)
-{
-	dn->pde = de;
-}
-
 extern struct device_node *allnodes;	/* temporary while merging */
 extern rwlock_t devtree_lock;	/* temporary while merging */
 
-extern struct device_node *of_find_all_nodes(struct device_node *prev);
-extern struct device_node *of_node_get(struct device_node *node);
-extern void of_node_put(struct device_node *node);
-
-/* For scanning the flat device-tree at boot time */
-extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
-					const char *uname, int depth,
-					void *data),
-				void *data);
-extern void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
-					unsigned long *size);
-extern int __init
-		of_flat_dt_is_compatible(unsigned long node, const char *name);
-extern unsigned long __init of_get_flat_dt_root(void);
-
 /* For updating the device tree at runtime */
 extern void of_attach_node(struct device_node *);
 extern void of_detach_node(struct device_node *);
 
 /* Other Prototypes */
-extern void finish_device_tree(void);
-extern void unflatten_device_tree(void);
 extern int early_uartlite_console(void);
-extern void early_init_devtree(void *);
-extern int machine_is_compatible(const char *compat);
-extern void print_properties(struct device_node *node);
-extern int prom_n_intr_cells(struct device_node *np);
-extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
-extern int prom_add_property(struct device_node *np, struct property *prop);
-extern int prom_remove_property(struct device_node *np, struct property *prop);
-extern int prom_update_property(struct device_node *np,
-				struct property *newprop,
-				struct property *oldprop);
 
 extern struct resource *request_OF_resource(struct device_node *node,
 				int index, const char *name_postfix);
@@ -166,18 +55,6 @@ extern int release_OF_resource(struct device_node *node, int index);
  * OF address retreival & translation
  */
 
-/* Helper to read a big number; size is in cells (not bytes) */
-static inline u64 of_read_number(const u32 *cell, int size)
-{
-	u64 r = 0;
-	while (size--)
-		r = (r << 32) | *(cell++);
-	return r;
-}
-
-/* Like of_read_number, but we want an unsigned long result */
-#define of_read_ulong(cell, size)	of_read_number(cell, size)
-
 /* Translate an OF address block into a CPU physical address
  */
 extern u64 of_translate_address(struct device_node *np, const u32 *addr);
@@ -305,12 +182,6 @@ extern int of_irq_to_resource(struct device_node *dev, int index,
  */
 extern void __iomem *of_iomap(struct device_node *device, int index);
 
-/*
- * NB: This is here while we transition from using asm/prom.h
- * to linux/of.h
- */
-#include <linux/of.h>
-
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_MICROBLAZE_PROM_H */
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 697ce3007f30..30916193fcc7 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -31,7 +31,7 @@
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
-#include <asm/prom.h>		/* for OF_DT_HEADER */
+#include <linux/of_fdt.h>		/* for OF_DT_HEADER */
 
 #ifdef CONFIG_MMU
 #include <asm/setup.h> /* COMMAND_LINE_SIZE */
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index c005cc6f1aaf..b817df172aa9 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -860,29 +860,6 @@ struct device_node *of_find_node_by_phandle(phandle handle)
 EXPORT_SYMBOL(of_find_node_by_phandle);
 
 /**
- *	of_find_all_nodes - Get next node in global list
- *	@prev:	Previous node or NULL to start iteration
- *		of_node_put() will be called on it
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_all_nodes(struct device_node *prev)
-{
-	struct device_node *np;
-
-	read_lock(&devtree_lock);
-	np = prev ? prev->allnext : allnodes;
-	for (; np != NULL; np = np->allnext)
-		if (of_node_get(np))
-			break;
-	of_node_put(prev);
-	read_unlock(&devtree_lock);
-	return np;
-}
-EXPORT_SYMBOL(of_find_all_nodes);
-
-/**
  *	of_node_get - Increment refcount of a node
  *	@node:	Node to inc refcount, NULL is supported to
  *		simplify writing of callers
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index 07cabed4b947..9f3c205fb75b 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -62,46 +62,14 @@ out:
 	return error;
 }
 
-asmlinkage long
-sys_mmap2(unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long pgoff)
-{
-	struct file *file = NULL;
-	int ret = -EBADF;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file) {
-			printk(KERN_INFO "no fd in mmap\r\n");
-			goto out;
-		}
-	}
-
-	down_write(&current->mm->mmap_sem);
-	ret = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-	if (file)
-		fput(file);
-out:
-	return ret;
-}
-
 asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
 			unsigned long prot, unsigned long flags,
 			unsigned long fd, off_t pgoff)
 {
-	int err = -EINVAL;
-
-	if (pgoff & ~PAGE_MASK) {
-		printk(KERN_INFO "no pagemask in mmap\r\n");
-		goto out;
-	}
+	if (pgoff & ~PAGE_MASK)
+		return -EINVAL;
 
-	err = sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
-out:
-	return err;
+	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
 }
 
 /*
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index ecec19155135..b96f365ea6b1 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -196,7 +196,7 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall		/* reserved for streams2 */
 	.long sys_vfork		/* 190 */
 	.long sys_getrlimit
-	.long sys_mmap2			/* mmap2 */
+	.long sys_mmap_pgoff		/* mmap2 */
 	.long sys_truncate64
 	.long sys_ftruncate64
 	.long sys_stat64		/* 195 */
@@ -371,3 +371,4 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall
 	.long sys_rt_tgsigqueueinfo	/* 365 */
 	.long sys_perf_event_open
+	.long sys_recvmmsg
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
index 6a907c58a4bc..cc2108b6b260 100644
--- a/arch/microblaze/lib/memcpy.c
+++ b/arch/microblaze/lib/memcpy.c
@@ -9,7 +9,7 @@
  * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
  * http://www.embedded.com/showArticle.jhtml?articleID=19205567
  *
- * Attempts were made, unsuccesfully, to contact the original
+ * Attempts were made, unsuccessfully, to contact the original
  * author of this code (Michael Morrow, Intel).  Below is the original
  * copyright notice.
  *
diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c
index d4e9f49a71f7..0929198c5e68 100644
--- a/arch/microblaze/lib/memmove.c
+++ b/arch/microblaze/lib/memmove.c
@@ -9,7 +9,7 @@
  * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
  * http://www.embedded.com/showArticle.jhtml?articleID=19205567
  *
- * Attempts were made, unsuccesfully, to contact the original
+ * Attempts were made, unsuccessfully, to contact the original
  * author of this code (Michael Morrow, Intel).  Below is the original
  * copyright notice.
  *
diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c
index 941dc8f94b03..4df851d41a29 100644
--- a/arch/microblaze/lib/memset.c
+++ b/arch/microblaze/lib/memset.c
@@ -9,7 +9,7 @@
  * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
  * http://www.embedded.com/showArticle.jhtml?articleID=19205567
  *
- * Attempts were made, unsuccesfully, to contact the original
+ * Attempts were made, unsuccessfully, to contact the original
  * author of this code (Michael Morrow, Intel).  Below is the original
  * copyright notice.
  *
diff --git a/arch/mips/include/asm/bug.h b/arch/mips/include/asm/bug.h
index 6cf29c26e873..540c98a810d1 100644
--- a/arch/mips/include/asm/bug.h
+++ b/arch/mips/include/asm/bug.h
@@ -11,9 +11,7 @@
 static inline void __noreturn BUG(void)
 {
 	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));
-	/* Fool GCC into thinking the function doesn't return. */
-	while (1)
-		;
+	unreachable();
 }
 
 #define HAVE_ARCH_BUG
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
index 03b1d69b142f..40bb9fde205f 100644
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -38,6 +38,7 @@ extern void (*flush_cache_range)(struct vm_area_struct *vma,
 extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
 extern void __flush_dcache_page(struct page *page);
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 static inline void flush_dcache_page(struct page *page)
 {
 	if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
diff --git a/arch/mips/include/asm/fcntl.h b/arch/mips/include/asm/fcntl.h
index 2a52333a062d..7c6681aa2ab8 100644
--- a/arch/mips/include/asm/fcntl.h
+++ b/arch/mips/include/asm/fcntl.h
@@ -10,7 +10,7 @@
 
 
 #define O_APPEND	0x0008
-#define O_SYNC		0x0010
+#define O_DSYNC		0x0010	/* used to be O_SYNC, see below */
 #define O_NONBLOCK	0x0080
 #define O_CREAT         0x0100	/* not fcntl */
 #define O_TRUNC		0x0200	/* not fcntl */
@@ -18,6 +18,21 @@
 #define O_NOCTTY	0x0800	/* not fcntl */
 #define FASYNC		0x1000	/* fcntl, for BSD compatibility */
 #define O_LARGEFILE	0x2000	/* allow large file opens */
+/*
+ * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using
+ * the O_SYNC flag.  We continue to use the existing numerical value
+ * for O_DSYNC semantics now, but using the correct symbolic name for it.
+ * This new value is used to request true Posix O_SYNC semantics.  It is
+ * defined in this strange way to make sure applications compiled against
+ * new headers get at least O_DSYNC semantics on older kernels.
+ *
+ * This has the nice side-effect that we can simply test for O_DSYNC
+ * wherever we do not care if O_DSYNC or O_SYNC is used.
+ *
+ * Note: __O_SYNC must never be used directly.
+ */
+#define __O_SYNC	0x4000
+#define O_SYNC		(__O_SYNC|O_DSYNC)
 #define O_DIRECT	0x8000	/* direct disk access hint */
 
 #define F_GETLK		14
diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h
index 8de0eb9c98a3..ed3a88da70f6 100644
--- a/arch/mips/include/asm/mach-pnx833x/gpio.h
+++ b/arch/mips/include/asm/mach-pnx833x/gpio.h
@@ -24,7 +24,7 @@
 
 /* BIG FAT WARNING: races danger!
    No protections exist here. Current users are only early init code,
-   when locking is not needed because no cuncurency yet exists there,
+   when locking is not needed because no concurrency yet exists there,
    and GPIO IRQ dispatcher, which does locking.
    However, if many uses will ever happen, proper locking will be needed
    - including locking between different uses
diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h
index 343ed15f8dc4..57a971904cfe 100644
--- a/arch/mips/include/asm/sgi/ioc.h
+++ b/arch/mips/include/asm/sgi/ioc.h
@@ -164,7 +164,7 @@ struct sgioc_regs {
 	u32 _unused5;
 	u8 _write[3];
 	volatile u8 write;
-#define SGIOC_WRITE_NTHRESH	0x01	/* use 4.5db threshhold */
+#define SGIOC_WRITE_NTHRESH	0x01	/* use 4.5db threshold */
 #define SGIOC_WRITE_TPSPEED	0x02	/* use 100ohm TP speed */
 #define SGIOC_WRITE_EPSEL	0x04	/* force cable mode: 1=AUI 0=TP */
 #define SGIOC_WRITE_EASEL	0x08	/* 1=autoselect 0=manual cable selection */
diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h
index b6faf08ca81d..591b9061fd8e 100644
--- a/arch/mips/include/asm/sibyte/sb1250_mac.h
+++ b/arch/mips/include/asm/sibyte/sb1250_mac.h
@@ -212,7 +212,7 @@
 #define G_MAC_TXD_WEIGHT1(x)        _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1)
 
 /*
- * MAC Fifo Threshhold registers (Table 9-14)
+ * MAC Fifo Threshold registers (Table 9-14)
  * Register: MAC_THRSH_CFG_0
  * Register: MAC_THRSH_CFG_1
  * Register: MAC_THRSH_CFG_2
diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h
index d0c29d4de084..31c76c021bb6 100644
--- a/arch/mips/include/asm/sn/sn0/hubio.h
+++ b/arch/mips/include/asm/sn/sn0/hubio.h
@@ -825,7 +825,7 @@ typedef union iprb_u {
 	struct {
 	    u64	rsvd1:	15,
 		error:	1,	/* Widget rcvd wr resp pkt w/ error */
-		ovflow:	5,	/* Over flow count. perf measurement */
+		ovflow:	5,	/* Overflow count. perf measurement */
 		fire_and_forget: 1, /* Launch Write without response */
 		mode:	2,	/* Widget operation Mode	*/
 		rsvd2:	2,
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
index ae05accd9fe4..9de5190f2487 100644
--- a/arch/mips/include/asm/socket.h
+++ b/arch/mips/include/asm/socket.h
@@ -80,6 +80,8 @@ To add: #define SO_REUSEPORT 0x0200	/* Allow local address and port reuse.  */
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             40
+
 #ifdef __KERNEL__
 
 /** sock_type - Socket types
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index df6a430de5eb..c7f1bfef1574 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -84,8 +84,16 @@ static inline int init_mips_clocksource(void)
 #endif
 }
 
-extern void clocksource_set_clock(struct clocksource *cs, unsigned int clock);
-extern void clockevent_set_clock(struct clock_event_device *cd,
-		unsigned int clock);
+static inline void clocksource_set_clock(struct clocksource *cs,
+					 unsigned int clock)
+{
+	clocksource_calc_mult_shift(cs, clock, 4);
+}
+
+static inline void clockevent_set_clock(struct clock_event_device *cd,
+					unsigned int clock)
+{
+	clockevents_calc_mult_shift(cd, clock, 4);
+}
 
 #endif /* _ASM_TIME_H */
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 8c9dfa9e9018..65c679ecbe6b 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -355,16 +355,17 @@
 #define __NR_rt_tgsigqueueinfo		(__NR_Linux + 332)
 #define __NR_perf_event_open		(__NR_Linux + 333)
 #define __NR_accept4			(__NR_Linux + 334)
+#define __NR_recvmmsg			(__NR_Linux + 335)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		334
+#define __NR_Linux_syscalls		335
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		334
+#define __NR_O32_Linux_syscalls		335
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -666,16 +667,17 @@
 #define __NR_rt_tgsigqueueinfo		(__NR_Linux + 291)
 #define __NR_perf_event_open		(__NR_Linux + 292)
 #define __NR_accept4			(__NR_Linux + 293)
+#define __NR_recvmmsg			(__NR_Linux + 294)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		293
+#define __NR_Linux_syscalls		294
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		293
+#define __NR_64_Linux_syscalls		294
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -981,16 +983,17 @@
 #define __NR_rt_tgsigqueueinfo		(__NR_Linux + 295)
 #define __NR_perf_event_open		(__NR_Linux + 296)
 #define __NR_accept4			(__NR_Linux + 297)
+#define __NR_recvmmsg			(__NR_Linux + 298)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		297
+#define __NR_Linux_syscalls		298
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		297
+#define __NR_N32_Linux_syscalls		298
 
 #ifdef __KERNEL__
 
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index ad4e017ed2f3..80e2ba694bab 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -82,6 +82,7 @@ static int sp_stopping;
 #define MTSP_O_SHLOCK		0x0010
 #define MTSP_O_EXLOCK		0x0020
 #define MTSP_O_ASYNC		0x0040
+/* XXX: check which of these is actually O_SYNC vs O_DSYNC */
 #define MTSP_O_FSYNC		O_SYNC
 #define MTSP_O_NOFOLLOW		0x0100
 #define MTSP_O_SYNC		0x0080
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index b77fefaff9da..f042563c924f 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -67,28 +67,13 @@ SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len,
 	unsigned long, prot, unsigned long, flags, unsigned long, fd,
 	unsigned long, pgoff)
 {
-	struct file * file = NULL;
 	unsigned long error;
 
 	error = -EINVAL;
 	if (pgoff & (~PAGE_MASK >> 12))
 		goto out;
-	pgoff >>= PAGE_SHIFT-12;
-
-	if (!(flags & MAP_ANONYMOUS)) {
-		error = -EBADF;
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-	if (file)
-		fput(file);
-
+	error = sys_mmap_pgoff(addr, len, prot, flags, fd,
+			       pgoff >> (PAGE_SHIFT-12));
 out:
 	return error;
 }
@@ -265,67 +250,6 @@ SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,
 }
 #endif
 
-struct sysctl_args32
-{
-	compat_caddr_t name;
-	int nlen;
-	compat_caddr_t oldval;
-	compat_caddr_t oldlenp;
-	compat_caddr_t newval;
-	compat_size_t newlen;
-	unsigned int __unused[4];
-};
-
-#ifdef CONFIG_SYSCTL_SYSCALL
-
-SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
-{
-	struct sysctl_args32 tmp;
-	int error;
-	size_t oldlen;
-	size_t __user *oldlenp = NULL;
-	unsigned long addr = (((unsigned long)&args->__unused[0]) + 7) & ~7;
-
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		return -EFAULT;
-
-	if (tmp.oldval && tmp.oldlenp) {
-		/* Duh, this is ugly and might not work if sysctl_args
-		   is in read-only memory, but do_sysctl does indirectly
-		   a lot of uaccess in both directions and we'd have to
-		   basically copy the whole sysctl.c here, and
-		   glibc's __sysctl uses rw memory for the structure
-		   anyway.  */
-		if (get_user(oldlen, (u32 __user *)A(tmp.oldlenp)) ||
-		    put_user(oldlen, (size_t __user *)addr))
-			return -EFAULT;
-		oldlenp = (size_t __user *)addr;
-	}
-
-	lock_kernel();
-	error = do_sysctl((int __user *)A(tmp.name), tmp.nlen, (void __user *)A(tmp.oldval),
-			  oldlenp, (void __user *)A(tmp.newval), tmp.newlen);
-	unlock_kernel();
-	if (oldlenp) {
-		if (!error) {
-			if (get_user(oldlen, (size_t __user *)addr) ||
-			    put_user(oldlen, (u32 __user *)A(tmp.oldlenp)))
-				error = -EFAULT;
-		}
-		copy_to_user(args->__unused, tmp.__unused, sizeof(tmp.__unused));
-	}
-	return error;
-}
-
-#else
-
-SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
-{
-	return -ENOSYS;
-}
-
-#endif /* CONFIG_SYSCTL_SYSCALL */
-
 SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name)
 {
 	int ret = 0;
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index fd2a9bb620d6..17202bbe843f 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -583,6 +583,7 @@ einval:	li	v0, -ENOSYS
 	sys	sys_rt_tgsigqueueinfo	4
 	sys	sys_perf_event_open	5
 	sys	sys_accept4		4
+	sys     sys_recvmmsg            5
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 18bf7f32c5e4..a8a6c596eb04 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -420,4 +420,5 @@ sys_call_table:
 	PTR	sys_rt_tgsigqueueinfo
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
+	PTR     sys_recvmmsg
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 6ebc07976694..66b5a48676dd 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -272,7 +272,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_munlockall
 	PTR	sys_vhangup			/* 6150 */
 	PTR	sys_pivot_root
-	PTR	sys_32_sysctl
+	PTR	compat_sys_sysctl
 	PTR	sys_prctl
 	PTR	compat_sys_adjtimex
 	PTR	compat_sys_setrlimit		/* 6155 */
@@ -418,4 +418,5 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_rt_tgsigqueueinfo	/* 5295 */
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
+	PTR     compat_sys_recvmmsg
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 14dde4ca932e..515f9eab2b28 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -356,7 +356,7 @@ sys_call_table:
 	PTR	sys_ni_syscall			/* 4150 */
 	PTR	sys_getsid
 	PTR	sys_fdatasync
-	PTR	sys_32_sysctl
+	PTR	compat_sys_sysctl
 	PTR	sys_mlock
 	PTR	sys_munlock			/* 4155 */
 	PTR	sys_mlockall
@@ -538,4 +538,5 @@ sys_call_table:
 	PTR	compat_sys_rt_tgsigqueueinfo
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
+	PTR     compat_sys_recvmmsg
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 24630fd8ef60..a38e3ee95515 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1331,7 +1331,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
 		if (!((asid += ASID_INC) & ASID_MASK) ) {
 			if (cpu_has_vtag_icache)
 				flush_icache_all();
-			/* Traverse all online CPUs (hack requires contigous range) */
+			/* Traverse all online CPUs (hack requires contiguous range) */
 			for_each_online_cpu(i) {
 				/*
 				 * We don't need to worry about our own CPU, nor those of
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index fe0d79805603..3f7f466190b4 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -93,7 +93,8 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		 * We do not accept a shared mapping if it would violate
 		 * cache aliasing constraints.
 		 */
-		if ((flags & MAP_SHARED) && (addr & shm_align_mask))
+		if ((flags & MAP_SHARED) &&
+		    ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
 			return -EINVAL;
 		return addr;
 	}
@@ -129,31 +130,6 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	}
 }
 
-/* common code for old and new mmaps */
-static inline unsigned long
-do_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
-        unsigned long flags, unsigned long fd, unsigned long pgoff)
-{
-	unsigned long error = -EBADF;
-	struct file * file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
 SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len,
 	unsigned long, prot, unsigned long, flags, unsigned long,
 	fd, off_t, offset)
@@ -164,7 +140,7 @@ SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len,
 	if (offset & ~PAGE_MASK)
 		goto out;
 
-	result = do_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+	result = sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
 
 out:
 	return result;
@@ -177,7 +153,7 @@ SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len,
 	if (pgoff & (~PAGE_MASK >> 12))
 		return -EINVAL;
 
-	return do_mmap2(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT-12));
+	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT-12));
 }
 
 save_static_function(sys_fork);
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 1f467d534642..fb7497405510 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -71,39 +71,6 @@ EXPORT_SYMBOL(perf_irq);
 
 unsigned int mips_hpt_frequency;
 
-void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find a shift value */
-	for (shift = 32; shift > 0; shift--) {
-		temp = (u64) NSEC_PER_SEC << shift;
-		do_div(temp, clock);
-		if ((temp >> 32) == 0)
-			break;
-	}
-	cs->shift = shift;
-	cs->mult = (u32) temp;
-}
-
-void __cpuinit clockevent_set_clock(struct clock_event_device *cd,
-	unsigned int clock)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find a shift value */
-	for (shift = 32; shift > 0; shift--) {
-		temp = (u64) clock << shift;
-		do_div(temp, NSEC_PER_SEC);
-		if ((temp >> 32) == 0)
-			break;
-	}
-	cd->shift = shift;
-	cd->mult = (u32) temp;
-}
-
 /*
  * This function exists in order to cause an error due to a duplicate
  * definition if platform code should have its own implementation.  The hook
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index b3deed8db619..14b9a28a4aec 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -37,23 +37,6 @@
 #include "ds1603.h"
 #endif
 
-/* Strategy function to write EEPROM after changing string entry */
-int sysctl_lasatstring(ctl_table *table,
-		void *oldval, size_t *oldlenp,
-		void *newval, size_t newlen)
-{
-	int r;
-
-	r = sysctl_string(table, oldval, oldlenp, newval, newlen);
-	if (r < 0)
-		return r;
-
-	if (newval && newlen)
-		lasat_write_eeprom_info();
-
-	return 0;
-}
-
 
 /* And the same for proc */
 int proc_dolasatstring(ctl_table *table, int write,
@@ -113,46 +96,6 @@ int proc_dolasatrtc(ctl_table *table, int write,
 }
 #endif
 
-/* Sysctl for setting the IP addresses */
-int sysctl_lasat_intvec(ctl_table *table,
-		    void *oldval, size_t *oldlenp,
-		    void *newval, size_t newlen)
-{
-	int r;
-
-	r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
-	if (r < 0)
-		return r;
-
-	if (newval && newlen)
-		lasat_write_eeprom_info();
-
-	return 0;
-}
-
-#ifdef CONFIG_DS1603
-/* Same for RTC */
-int sysctl_lasat_rtc(ctl_table *table,
-		    void *oldval, size_t *oldlenp,
-		    void *newval, size_t newlen)
-{
-	struct timespec ts;
-	int r;
-
-	read_persistent_clock(&ts);
-	rtctmp = ts.tv_sec;
-	if (rtctmp < 0)
-		rtctmp = 0;
-	r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
-	if (r < 0)
-		return r;
-	if (newval && newlen)
-		rtc_mips_set_mmss(rtctmp);
-
-	return r;
-}
-#endif
-
 #ifdef CONFIG_INET
 int proc_lasat_ip(ctl_table *table, int write,
 		       void *buffer, size_t *lenp, loff_t *ppos)
@@ -214,23 +157,6 @@ int proc_lasat_ip(ctl_table *table, int write,
 }
 #endif
 
-static int sysctl_lasat_prid(ctl_table *table,
-				     void *oldval, size_t *oldlenp,
-				     void *newval, size_t newlen)
-{
-	int r;
-
-	r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
-	if (r < 0)
-		return r;
-	if (newval && newlen) {
-		lasat_board_info.li_eeprom_info.prid = *(int *)newval;
-		lasat_write_eeprom_info();
-		lasat_init_board_info();
-	}
-	return 0;
-}
-
 int proc_lasat_prid(ctl_table *table, int write,
 		       void *buffer, size_t *lenp, loff_t *ppos)
 {
@@ -252,115 +178,92 @@ extern int lasat_boot_to_service;
 
 static ctl_table lasat_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "cpu-hz",
 		.data		= &lasat_board_info.li_cpu_hz,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "bus-hz",
 		.data		= &lasat_board_info.li_bus_hz,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "bmid",
 		.data		= &lasat_board_info.li_bmid,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "prid",
 		.data		= &lasat_board_info.li_prid,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_lasat_prid,
-		.strategy	= &sysctl_lasat_prid
-	},
+		.proc_handler	= proc_lasat_prid,
+.	},
 #ifdef CONFIG_INET
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "ipaddr",
 		.data		= &lasat_board_info.li_eeprom_info.ipaddr,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_lasat_ip,
-		.strategy	= &sysctl_lasat_intvec
+		.proc_handler	= proc_lasat_ip,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "netmask",
 		.data		= &lasat_board_info.li_eeprom_info.netmask,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_lasat_ip,
-		.strategy	= &sysctl_lasat_intvec
+		.proc_handler	= proc_lasat_ip,
 	},
 #endif
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "passwd_hash",
 		.data		= &lasat_board_info.li_eeprom_info.passwd_hash,
 		.maxlen		=
 			sizeof(lasat_board_info.li_eeprom_info.passwd_hash),
 		.mode		= 0600,
-		.proc_handler	= &proc_dolasatstring,
-		.strategy	= &sysctl_lasatstring
+		.proc_handler	= proc_dolasatstring,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "boot-service",
 		.data		= &lasat_boot_to_service,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec
+		.proc_handler	= proc_dointvec,
 	},
 #ifdef CONFIG_DS1603
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "rtc",
 		.data		= &rtctmp,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dolasatrtc,
-		.strategy	= &sysctl_lasat_rtc
+		.proc_handler	= proc_dolasatrtc,
 	},
 #endif
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "namestr",
 		.data		= &lasat_board_info.li_namestr,
 		.maxlen		= sizeof(lasat_board_info.li_namestr),
 		.mode		= 0444,
-		.proc_handler	= &proc_dostring,
-		.strategy	= &sysctl_string
+		.proc_handler	= proc_dostring,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "typestr",
 		.data		= &lasat_board_info.li_typestr,
 		.maxlen		= sizeof(lasat_board_info.li_typestr),
 		.mode		= 0444,
-		.proc_handler	= &proc_dostring,
-		.strategy	= &sysctl_string
+		.proc_handler	= proc_dostring,
 	},
 	{}
 };
 
 static ctl_table lasat_root_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "lasat",
 		.mode		=  0555,
 		.child		= lasat_table
diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c
index 7c92f79b6480..e94ef158f980 100644
--- a/arch/mips/loongson/common/mem.c
+++ b/arch/mips/loongson/common/mem.c
@@ -26,7 +26,7 @@ void __init prom_init_memory(void)
 /* override of arch/mips/mm/cache.c: __uncached_access */
 int __uncached_access(struct file *file, unsigned long addr)
 {
-	if (file->f_flags & O_SYNC)
+	if (file->f_flags & O_DSYNC)
 		return 1;
 
 	return addr >= __pa(high_memory) ||
diff --git a/arch/mips/math-emu/dp_sub.c b/arch/mips/math-emu/dp_sub.c
index b30c5b1f1a2c..a2127d685a0d 100644
--- a/arch/mips/math-emu/dp_sub.c
+++ b/arch/mips/math-emu/dp_sub.c
@@ -110,7 +110,7 @@ ieee754dp ieee754dp_sub(ieee754dp x, ieee754dp y)
 
 	case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
 		DPDNORMX;
-		/* FAAL THOROUGH */
+		/* FALL THROUGH */
 
 	case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
 		/* normalize ym,ye */
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 694d51f523d1..102b2dfa542a 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -194,7 +194,7 @@ void __devinit cpu_cache_init(void)
 
 int __weak __uncached_access(struct file *file, unsigned long addr)
 {
-	if (file->f_flags & O_SYNC)
+	if (file->f_flags & O_DSYNC)
 		return 1;
 
 	return addr >= __pa(high_memory);
diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index a2b2d62d88e3..8ebc3848f3ac 100644
--- a/arch/mips/txx9/generic/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -117,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	if (chip_id == SMSC_FDC37M81X_CHIP_ID)
 		smsc_fdc37m81x_config_end();
 	else {
-		printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
+		printk(KERN_WARNING "%s: unknown chip id 0x%02x\n", __func__,
 		       chip_id);
 		g_smsc_fdc37m81x_base = 0;
 	}
diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h
index 1a55d61f0d06..29e692f7f030 100644
--- a/arch/mn10300/include/asm/cacheflush.h
+++ b/arch/mn10300/include/asm/cacheflush.h
@@ -26,6 +26,7 @@
 #define flush_cache_page(vma, vmaddr, pfn)	do {} while (0)
 #define flush_cache_vmap(start, end)		do {} while (0)
 #define flush_cache_vunmap(start, end)		do {} while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do {} while (0)
 #define flush_dcache_mmap_lock(mapping)		do {} while (0)
 #define flush_dcache_mmap_unlock(mapping)	do {} while (0)
diff --git a/arch/mn10300/include/asm/mman.h b/arch/mn10300/include/asm/mman.h
index 8eebf89f5ab1..db5c53da73ce 100644
--- a/arch/mn10300/include/asm/mman.h
+++ b/arch/mn10300/include/asm/mman.h
@@ -1 +1,6 @@
 #include <asm-generic/mman.h>
+
+#define MIN_MAP_ADDR	PAGE_SIZE	/* minimum fixed mmap address */
+
+#define arch_mmap_check(addr, len, flags) \
+	(((flags) & MAP_FIXED && (addr) < MIN_MAP_ADDR) ? -EINVAL : 0)
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h
index 4df75af29d76..4e60c4281288 100644
--- a/arch/mn10300/include/asm/socket.h
+++ b/arch/mn10300/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index a94e7ea3faa6..c9ee6c009d79 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -578,7 +578,7 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall	/* reserved for streams2 */
 	.long sys_vfork		/* 190 */
 	.long sys_getrlimit
-	.long sys_mmap2
+	.long sys_mmap_pgoff
 	.long sys_truncate64
 	.long sys_ftruncate64
 	.long sys_stat64	/* 195 */
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index 892cce82867e..ec8a21df1142 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -275,16 +275,12 @@ asmlinkage long sys_execve(char __user *name,
 	char *filename;
 	int error;
 
-	lock_kernel();
-
 	filename = getname(name);
 	error = PTR_ERR(filename);
-	if (!IS_ERR(filename)) {
-		error = do_execve(filename, argv, envp, __frame);
-		putname(filename);
-	}
-
-	unlock_kernel();
+	if (IS_ERR(filename))
+		return error;
+	error = do_execve(filename, argv, envp, __frame);
+	putname(filename);
 	return error;
 }
 
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index 8ca5af00334c..17cc6ce04e84 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -23,47 +23,13 @@
 
 #include <asm/uaccess.h>
 
-#define MIN_MAP_ADDR	PAGE_SIZE	/* minimum fixed mmap address */
-
-/*
- * memory mapping syscall
- */
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
-			  unsigned long prot, unsigned long flags,
-			  unsigned long fd, unsigned long pgoff)
-{
-	struct file *file = NULL;
-	long error = -EINVAL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	if (flags & MAP_FIXED && addr < MIN_MAP_ADDR)
-		goto out;
-
-	error = -EBADF;
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
 asmlinkage long old_mmap(unsigned long addr, unsigned long len,
 			 unsigned long prot, unsigned long flags,
 			 unsigned long fd, unsigned long offset)
 {
 	if (offset & ~PAGE_MASK)
 		return -EINVAL;
-	return sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+	return sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
 }
 
 struct sel_arg_struct {
diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h
index 724395143f26..7a73b615c23d 100644
--- a/arch/parisc/include/asm/cacheflush.h
+++ b/arch/parisc/include/asm/cacheflush.h
@@ -42,6 +42,7 @@ void flush_cache_mm(struct mm_struct *mm);
 #define flush_cache_vmap(start, end)		flush_cache_all()
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *page);
 
 #define flush_dcache_mmap_lock(mapping) \
diff --git a/arch/parisc/include/asm/fcntl.h b/arch/parisc/include/asm/fcntl.h
index 1e1c824764ee..f357fc693c89 100644
--- a/arch/parisc/include/asm/fcntl.h
+++ b/arch/parisc/include/asm/fcntl.h
@@ -1,14 +1,13 @@
 #ifndef _PARISC_FCNTL_H
 #define _PARISC_FCNTL_H
 
-/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
-   located on an ext2 file system */
 #define O_APPEND	000000010
 #define O_BLKSEEK	000000100 /* HPUX only */
 #define O_CREAT		000000400 /* not fcntl */
 #define O_EXCL		000002000 /* not fcntl */
 #define O_LARGEFILE	000004000
-#define O_SYNC		000100000
+#define __O_SYNC	000100000
+#define O_SYNC		(__O_SYNC|O_DSYNC)
 #define O_NONBLOCK	000200004 /* HPUX has separate NDELAY & NONBLOCK */
 #define O_NOCTTY	000400000 /* not fcntl */
 #define O_DSYNC		001000000 /* HPUX only */
diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h
index 960b1e5d8e16..225b7d6a1a0a 100644
--- a/arch/parisc/include/asm/socket.h
+++ b/arch/parisc/include/asm/socket.h
@@ -59,6 +59,8 @@
 #define SO_TIMESTAMPING		0x4020
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             0x4021
+
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index 75099efb3bf3..f9f6783e4bdd 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -24,7 +24,7 @@
  *
  *  This driver programs the PCX-U/PCX-W performance counters
  *  on the PA-RISC 2.0 chips.  The driver keeps all images now
- *  internally to the kernel to hopefully eliminate the possiblity
+ *  internally to the kernel to hopefully eliminate the possibility
  *  of a bad image halting the CPU.  Also, there are different
  *  images for the PCX-W and later chips vs the PCX-U chips.
  *
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index 71b31957c8f1..9147391afb03 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -110,37 +110,14 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	return addr;
 }
 
-static unsigned long do_mmap2(unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags, unsigned long fd,
-	unsigned long pgoff)
-{
-	struct file * file = NULL;
-	unsigned long error = -EBADF;
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file != NULL)
-		fput(file);
-out:
-	return error;
-}
-
 asmlinkage unsigned long sys_mmap2(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags, unsigned long fd,
 	unsigned long pgoff)
 {
 	/* Make sure the shift for mmap2 is constant (12), no matter what PAGE_SIZE
 	   we have. */
-	return do_mmap2(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT - 12));
+	return sys_mmap_pgoff(addr, len, prot, flags, fd,
+			      pgoff >> (PAGE_SHIFT - 12));
 }
 
 asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
@@ -148,7 +125,8 @@ asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
 		unsigned long offset)
 {
 	if (!(offset & ~PAGE_MASK)) {
-		return do_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+		return sys_mmap_pgoff(addr, len, prot, flags, fd,
+					offset >> PAGE_SHIFT);
 	} else {
 		return -EINVAL;
 	}
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 561388b17c91..76d23ec8dfaa 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -90,77 +90,6 @@ asmlinkage long sys32_unimplemented(int r26, int r25, int r24, int r23,
     return -ENOSYS;
 }
 
-#ifdef CONFIG_SYSCTL
-
-struct __sysctl_args32 {
-	u32 name;
-	int nlen;
-	u32 oldval;
-	u32 oldlenp;
-	u32 newval;
-	u32 newlen;
-	u32 __unused[4];
-};
-
-asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args)
-{
-#ifndef CONFIG_SYSCTL_SYSCALL
-	return -ENOSYS;
-#else
-	struct __sysctl_args32 tmp;
-	int error;
-	unsigned int oldlen32;
-	size_t oldlen, __user *oldlenp = NULL;
-	unsigned long addr = (((long __force)&args->__unused[0]) + 7) & ~7;
-
-	DBG(("sysctl32(%p)\n", args));
-
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		return -EFAULT;
-
-	if (tmp.oldval && tmp.oldlenp) {
-		/* Duh, this is ugly and might not work if sysctl_args
-		   is in read-only memory, but do_sysctl does indirectly
-		   a lot of uaccess in both directions and we'd have to
-		   basically copy the whole sysctl.c here, and
-		   glibc's __sysctl uses rw memory for the structure
-		   anyway.  */
-		/* a possibly better hack than this, which will avoid the
-		 * problem if the struct is read only, is to push the
-		 * 'oldlen' value out to the user's stack instead. -PB
-		 */
-		if (get_user(oldlen32, (u32 *)(u64)tmp.oldlenp))
-			return -EFAULT;
-		oldlen = oldlen32;
-		if (put_user(oldlen, (size_t *)addr))
-			return -EFAULT;
-		oldlenp = (size_t *)addr;
-	}
-
-	lock_kernel();
-	error = do_sysctl((int __user *)(u64)tmp.name, tmp.nlen,
-			  (void __user *)(u64)tmp.oldval, oldlenp,
-			  (void __user *)(u64)tmp.newval, tmp.newlen);
-	unlock_kernel();
-	if (oldlenp) {
-		if (!error) {
-			if (get_user(oldlen, (size_t *)addr)) {
-				error = -EFAULT;
-			} else {
-				oldlen32 = oldlen;
-				if (put_user(oldlen32, (u32 *)(u64)tmp.oldlenp))
-					error = -EFAULT;
-			}
-		}
-		if (copy_to_user(args->__unused, tmp.__unused, sizeof(tmp.__unused)))
-			error = -EFAULT;
-	}
-	return error;
-#endif
-}
-
-#endif /* CONFIG_SYSCTL */
-
 asmlinkage long sys32_sched_rr_get_interval(pid_t pid,
 	struct compat_timespec __user *interval)
 {
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 843f423dec67..01c4fcf8f481 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -234,7 +234,7 @@
 	ENTRY_SAME(getsid)
 	ENTRY_SAME(fdatasync)
 	/* struct __sysctl_args is a mess */
-	ENTRY_DIFF(sysctl)
+	ENTRY_COMP(sysctl)
 	ENTRY_SAME(mlock)		/* 150 */
 	ENTRY_SAME(munlock)
 	ENTRY_SAME(mlockall)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2ba14e77296c..0df57466e783 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -56,6 +56,16 @@ config IRQ_PER_CPU
 	bool
 	default y
 
+config NR_IRQS
+	int "Number of virtual interrupt numbers"
+	range 32 512
+	default "512"
+	help
+	  This defines the number of virtual interrupt numbers the kernel
+	  can manage. Virtual interrupt numbers are what you see in
+	  /proc/interrupts. If you configure your system to have too few,
+	  drivers will fail to load or worse - handle with care.
+
 config STACKTRACE_SUPPORT
 	bool
 	default y
@@ -199,24 +209,14 @@ config DEFAULT_UIMAGE
 config REDBOOT
 	bool
 
-config HIBERNATE_32
-	bool
-	depends on (PPC_PMAC && !SMP) || BROKEN
-	default y
-
-config HIBERNATE_64
-	bool
-	depends on BROKEN || (PPC_PMAC64 && EXPERIMENTAL)
-	default y
-
 config ARCH_HIBERNATION_POSSIBLE
 	bool
-	depends on (PPC64 && HIBERNATE_64) || (PPC32 && HIBERNATE_32)
 	default y
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx
+	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
+		   PPC_85xx || PPC_86xx
 
 config PPC_DCR_NATIVE
 	bool
@@ -320,6 +320,10 @@ config HOTPLUG_CPU
 
 	  Say N if you are unsure.
 
+config ARCH_CPU_PROBE_RELEASE
+	def_bool y
+	depends on HOTPLUG_CPU
+
 config ARCH_ENABLE_MEMORY_HOTPLUG
 	def_bool y
 
@@ -378,6 +382,19 @@ config IRQ_ALL_CPUS
 	  CPU.  Generally saying Y is safe, although some problems have been
 	  reported with SMP Power Macintoshes with this option enabled.
 
+config SPARSE_IRQ
+	bool "Support sparse irq numbering"
+	default y
+	help
+	  This enables support for sparse irqs. This is useful for distro
+	  kernels that want to define a high CONFIG_NR_CPUS value but still
+	  want to have low kernel memory footprint on smaller machines.
+
+	  ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread
+	    out the irq_desc[] array in a more NUMA-friendly way. )
+
+	  If you don't know what to do here, say Y.
+
 config NUMA
 	bool "NUMA support"
 	depends on PPC64
@@ -652,6 +669,14 @@ config FSL_PCI
 	select PPC_INDIRECT_PCI
 	select PCI_QUIRKS
 
+config FSL_PMC
+	bool
+	default y
+	depends on SUSPEND && (PPC_85xx || PPC_86xx)
+	help
+	  Freescale MPC85xx/MPC86xx power management controller support
+	  (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
+
 config 4xx_SOC
 	bool
 
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 3b1005185390..bf3382f1904d 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -46,7 +46,7 @@ config DEBUG_STACK_USAGE
 
 config HCALL_STATS
 	bool "Hypervisor call instrumentation"
-	depends on PPC_PSERIES && DEBUG_FS
+	depends on PPC_PSERIES && DEBUG_FS && TRACEPOINTS
 	help
 	  Adds code to keep track of the number of hypervisor calls made and
 	  the amount of time spent in hypervisor calls.  Wall time spent in
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index c920170b7dfe..cd56bb5b347b 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -352,6 +352,7 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
@@ -381,6 +382,7 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
diff --git a/arch/powerpc/boot/dts/eiger.dts b/arch/powerpc/boot/dts/eiger.dts
index c4a934f2e886..48bcf7187924 100644
--- a/arch/powerpc/boot/dts/eiger.dts
+++ b/arch/powerpc/boot/dts/eiger.dts
@@ -316,6 +316,7 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
@@ -345,6 +346,7 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
@@ -375,6 +377,8 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII1>;
@@ -403,6 +407,8 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII1>;
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 910944edd886..c86114e93f1e 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -118,6 +118,12 @@
 			};
 		};
 
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
 		fpga@4,0 {
 			compatible = "gef,ppc9a-fpga-regs";
 			reg = <0x4 0x0 0x40>;
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 2107d3c7cfe1..820c2b355ab1 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -115,6 +115,12 @@
 			};
 		};
 
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
 		fpga@4,0 {
 			compatible = "gef,fpga-regs";
 			reg = <0x4 0x0 0x40>;
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index 35a63183eecc..30911adefc8e 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -84,6 +84,12 @@
 			  6 0 0xfd000000 0x00800000     // IO FPGA (8-bit)
 			  7 0 0xfd800000 0x00800000>;   // IO FPGA (32-bit)
 
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
 		fpga@4,0 {
 			compatible = "gef,fpga-regs";
 			reg = <0x4 0x0 0x40>;
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index f3787a27f634..f6f618939293 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -292,6 +292,7 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
@@ -321,6 +322,7 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
@@ -351,6 +353,8 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII1>;
@@ -379,6 +383,8 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII1>;
diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
index 5b2a4947bf82..2b256694eca6 100644
--- a/arch/powerpc/boot/dts/haleakala.dts
+++ b/arch/powerpc/boot/dts/haleakala.dts
@@ -226,6 +226,8 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>;
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index 077819bc3cbd..51eb6ed5da2d 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -16,7 +16,7 @@
 
 / {
 	#address-cells = <2>;
-	#size-cells = <1>;
+	#size-cells = <2>;
 	model = "amcc,katmai";
 	compatible = "amcc,katmai";
 	dcr-parent = <&{/cpus/cpu@0}>;
@@ -49,7 +49,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
+		reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller0 {
@@ -112,7 +112,15 @@
 		compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges;
+		/*        addr-child     addr-parent    size */
+		ranges = <0x4 0xe0000000 0x4 0xe0000000 0x20000000
+			  0xc 0x00000000 0xc 0x00000000 0x20000000
+			  0xd 0x00000000 0xd 0x00000000 0x80000000
+			  0xd 0x80000000 0xd 0x80000000 0x80000000
+			  0xe 0x00000000 0xe 0x00000000 0x80000000
+			  0xe 0x80000000 0xe 0x80000000 0x80000000
+			  0xf 0x00000000 0xf 0x00000000 0x80000000
+			  0xf 0x80000000 0xf 0x80000000 0x80000000>;
 		clock-frequency = <0>; /* Filled in by zImage */
 
 		SDRAM0: sdram {
@@ -245,8 +253,8 @@
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
 				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
 
 			/* This drives busses 0 to 0xf */
 			bus-range = <0x0 0xf>;
@@ -289,10 +297,10 @@
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
 				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
 
-			/* This drives busses 10 to 0x1f */
+			/* This drives busses 0x10 to 0x1f */
 			bus-range = <0x10 0x1f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
@@ -330,10 +338,10 @@
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
 				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
 
-			/* This drives busses 10 to 0x1f */
+			/* This drives busses 0x20 to 0x2f */
 			bus-range = <0x20 0x2f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
@@ -371,10 +379,10 @@
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
 				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
 
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
 
-			/* This drives busses 10 to 0x1f */
+			/* This drives busses 0x30 to 0x3f */
 			bus-range = <0x30 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index c46561456ede..083e68eeaca4 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -272,6 +272,8 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>;
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
@@ -300,6 +302,8 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>;
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index 167044f7de1d..65b8b4f27efe 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -59,6 +59,13 @@
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;	/* Filled in by U-Boot */
 
+		pmc: power@b00 {
+			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
index ffc246e72670..63d48b632c84 100644
--- a/arch/powerpc/boot/dts/makalu.dts
+++ b/arch/powerpc/boot/dts/makalu.dts
@@ -227,6 +227,8 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>;
 				phy-mode = "rgmii";
 				phy-map = <0x0000003f>;	/* Start at 6 */
 				rgmii-device = <&RGMII0>;
@@ -255,6 +257,8 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+                                rx-fifo-size-gige = <16384>;
+                                tx-fifo-size-gige = <16384>;
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 436c9c671dd9..05ad8c98e527 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -79,6 +79,13 @@
 			reg = <0x200 0x100>;
 		};
 
+		pmc: power@b00 {
+			compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -163,6 +170,7 @@
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0x4c>;
 			fsl,descriptor-types-mask = <0x0122003f>;
+			sleep = <&pmc 0x03000000>;
 		};
 
 		ipic: pic@700 {
@@ -428,5 +436,6 @@
 		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
+		sleep = <&pmc 0x00010000>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 9a0952f74b81..f4fadb23ad6f 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -62,6 +62,13 @@
 			reg = <0x200 0x100>;
 		};
 
+		pmc: power@b00 {
+			compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -141,6 +148,7 @@
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0x4c>;
 			fsl,descriptor-types-mask = <0x0122003f>;
+			sleep = <&pmc 0x03000000>;
 		};
 
 		ipic:pic@700 {
@@ -360,5 +368,6 @@
 		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
+		sleep = <&pmc 0x00010000>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 39ff4c829caf..45cfa1c50a2a 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -99,6 +99,13 @@
 			reg = <0x200 0x100>;
 		};
 
+		pmc: power@b00 {
+			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -194,6 +201,7 @@
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0x7e>;
 			fsl,descriptor-types-mask = <0x01010ebf>;
+			sleep = <&pmc 0x03000000>;
 		};
 
 		ipic: pic@700 {
@@ -470,5 +478,6 @@
 		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
+		sleep = <&pmc 0x00010000>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 6315d6fcc58a..bdf4459677b1 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -71,6 +71,13 @@
 			reg = <0x200 0x100>;
 		};
 
+		pmc: power@b00 {
+			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -161,6 +168,7 @@
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0x7e>;
 			fsl,descriptor-types-mask = <0x01010ebf>;
+			sleep = <&pmc 0x03000000>;
 		};
 
 		ipic: interrupt-controller@700 {
@@ -455,6 +463,7 @@
 				 0xa800 0 0 2 &ipic 20 8
 				 0xa800 0 0 3 &ipic 21 8
 				 0xa800 0 0 4 &ipic 18 8>;
+		sleep = <&pmc 0x00010000>;
 		/* filled by u-boot */
 		bus-range = <0 0>;
 		clock-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 00c2bbda7013..6d892ba74e55 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -40,6 +40,8 @@
 			i-cache-line-size = <32>;	// 32 bytes
 			d-cache-size = <0x8000>;		// L1, 32K
 			i-cache-size = <0x8000>;		// L1, 32K
+			sleep = <&pmc 0x00008000	// core
+				 &pmc 0x00004000>;	// timebase
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -94,31 +96,41 @@
 			interrupts = <16 2>;
 		};
 
-		i2c@3000 {
+		i2c-sleep-nexus {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x00000004>;
+			ranges;
 
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <43 2>;
+				interrupt-parent = <&mpic>;
+				dfsrr;
+
+				rtc@68 {
+					compatible = "dallas,ds1374";
+					reg = <0x68>;
+					interrupts = <3 1>;
+					interrupt-parent = <&mpic>;
+				};
 			};
-		};
 
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
+			i2c@3100 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				compatible = "fsl-i2c";
+				reg = <0x3100 0x100>;
+				interrupts = <43 2>;
+				interrupt-parent = <&mpic>;
+				dfsrr;
+			};
 		};
 
 		dma@21300 {
@@ -128,6 +140,8 @@
 			reg = <0x21300 0x4>;
 			ranges = <0x0 0x21100 0x200>;
 			cell-index = <0>;
+			sleep = <&pmc 0x00000400>;
+
 			dma-channel@0 {
 				compatible = "fsl,mpc8568-dma-channel",
 						"fsl,eloplus-dma-channel";
@@ -176,6 +190,7 @@
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
+			sleep = <&pmc 0x00000080>;
 
 			mdio@520 {
 				#address-cells = <1>;
@@ -228,6 +243,7 @@
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi1>;
 			phy-handle = <&phy3>;
+			sleep = <&pmc 0x00000040>;
 
 			mdio@520 {
 				#address-cells = <1>;
@@ -242,30 +258,47 @@
 			};
 		};
 
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
+		duart-sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x00000002>;
+			ranges;
+
+			serial0: serial@4500 {
+				cell-index = <0>;
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x4500 0x100>;
+				clock-frequency = <0>;
+				interrupts = <42 2>;
+				interrupt-parent = <&mpic>;
+			};
+
+			serial1: serial@4600 {
+				cell-index = <1>;
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x4600 0x100>;
+				clock-frequency = <0>;
+				interrupts = <42 2>;
+				interrupt-parent = <&mpic>;
+			};
 		};
 
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8548-guts";
+		global-utilities@e0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
 			reg = <0xe0000 0x1000>;
+			ranges = <0 0xe0000 0x1000>;
 			fsl,has-rstcr;
-		};
 
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
+			pmc: power@70 {
+				compatible = "fsl,mpc8568-pmc",
+					     "fsl,mpc8548-pmc";
+				reg = <0x70 0x20>;
+			};
 		};
 
 		crypto@30000 {
@@ -277,6 +310,7 @@
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0xfe>;
 			fsl,descriptor-types-mask = <0x12b0ebf>;
+			sleep = <&pmc 0x01000000>;
 		};
 
 		mpic: pic@40000 {
@@ -376,6 +410,7 @@
 		compatible = "fsl,qe";
 		ranges = <0x0 0xe0080000 0x40000>;
 		reg = <0xe0080000 0x480>;
+		sleep = <&pmc 0x00000800>;
 		brg-frequency = <0>;
 		bus-frequency = <396000000>;
 		fsl,qe-num-riscs = <2>;
@@ -509,6 +544,7 @@
 		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+		sleep = <&pmc 0x80000000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
@@ -534,6 +570,7 @@
 		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
 			  0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+		sleep = <&pmc 0x20000000>;
 		clock-frequency = <33333333>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
@@ -570,5 +607,7 @@
 			      55 2 /* msg2_tx   */
 			      56 2 /* msg2_rx   */>;
 		interrupt-parent = <&mpic>;
+		sleep = <&pmc 0x00080000   /* controller */
+			 &pmc 0x00040000>; /* message unit */
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 1e3ec8f059bf..795eb362fcf9 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -41,6 +41,8 @@
 			i-cache-line-size = <32>;	// 32 bytes
 			d-cache-size = <0x8000>;		// L1, 32K
 			i-cache-size = <0x8000>;		// L1, 32K
+			sleep = <&pmc 0x00008000	// core
+				 &pmc 0x00004000>;	// timebase
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -59,6 +61,7 @@
 		reg = <0xe0005000 0x1000>;
 		interrupts = <19 2>;
 		interrupt-parent = <&mpic>;
+		sleep = <&pmc 0x08000000>;
 
 		ranges = <0x0 0x0 0xfe000000 0x02000000
 			  0x1 0x0 0xf8000000 0x00008000
@@ -158,51 +161,69 @@
 			interrupts = <18 2>;
 		};
 
-		i2c@3000 {
+		i2c-sleep-nexus {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x00000004>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <43 2>;
+				interrupt-parent = <&mpic>;
+				dfsrr;
+
+				rtc@68 {
+					compatible = "dallas,ds1374";
+					reg = <0x68>;
+					interrupts = <3 1>;
+					interrupt-parent = <&mpic>;
+				};
+			};
 
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
+			i2c@3100 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				compatible = "fsl-i2c";
+				reg = <0x3100 0x100>;
+				interrupts = <43 2>;
+				interrupt-parent = <&mpic>;
+				dfsrr;
 			};
 		};
 
-		i2c@3100 {
+		duart-sleep-nexus {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x00000002>;
+			ranges;
 
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
+			serial0: serial@4500 {
+				cell-index = <0>;
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x4500 0x100>;
+				clock-frequency = <0>;
+				interrupts = <42 2>;
+				interrupt-parent = <&mpic>;
+			};
 
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
+			serial1: serial@4600 {
+				cell-index = <1>;
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x4600 0x100>;
+				clock-frequency = <0>;
+				interrupts = <42 2>;
+				interrupt-parent = <&mpic>;
+			};
 		};
 
 		L2: l2-cache-controller@20000 {
@@ -260,6 +281,7 @@
 			reg = <0x2e000 0x1000>;
 			interrupts = <72 0x8>;
 			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x00200000>;
 			/* Filled in by U-Boot */
 			clock-frequency = <0>;
 			status = "disabled";
@@ -276,6 +298,7 @@
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0xbfe>;
 			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x01000000>;
 		};
 
 		mpic: pic@40000 {
@@ -304,9 +327,18 @@
 		};
 
 		global-utilities@e0000 {
-			compatible = "fsl,mpc8569-guts";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
 			reg = <0xe0000 0x1000>;
+			ranges = <0 0xe0000 0x1000>;
 			fsl,has-rstcr;
+
+			pmc: power@70 {
+				compatible = "fsl,mpc8569-pmc",
+					     "fsl,mpc8548-pmc";
+				reg = <0x70 0x20>;
+			};
 		};
 
 		par_io@e0100 {
@@ -422,6 +454,7 @@
 		compatible = "fsl,qe";
 		ranges = <0x0 0xe0080000 0x40000>;
 		reg = <0xe0080000 0x480>;
+		sleep = <&pmc 0x00000800>;
 		brg-frequency = <0>;
 		bus-frequency = <0>;
 		fsl,qe-num-riscs = <4>;
@@ -684,6 +717,7 @@
 		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
 			  0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
+		sleep = <&pmc 0x20000000>;
 		clock-frequency = <33333333>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -714,5 +748,6 @@
 			      55 2 /* msg2_tx   */
 			      56 2 /* msg2_rx   */>;
 		interrupt-parent = <&mpic>;
+		sleep = <&pmc 0x00080000>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index f468d215f716..9535ce68caae 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -35,6 +35,8 @@
 			i-cache-line-size = <32>;
 			d-cache-size = <32768>;		// L1
 			i-cache-size = <32768>;		// L1
+			sleep = <&pmc 0x00008000 0	// core
+				 &pmc 0x00004000 0>;	// timebase
 			timebase-frequency = <0>;	// From uboot
 			bus-frequency = <0>;		// From uboot
 			clock-frequency = <0>;		// From uboot
@@ -60,6 +62,7 @@
 			  5 0 0xe8480000 0x00008000
 			  6 0 0xe84c0000 0x00008000
 			  3 0 0xe8000000 0x00000020>;
+		sleep = <&pmc 0x08000000 0>;
 
 		flash@0,0 {
 			compatible = "cfi-flash";
@@ -105,6 +108,8 @@
 			compatible = "fsl,fpga-pixis";
 			reg = <3 0 0x20>;
 			ranges = <0 3 0 0x20>;
+			interrupt-parent = <&mpic>;
+			interrupts = <8 8>;
 
 			sdcsr_pio: gpio-controller@a {
 				#gpio-cells = <2>;
@@ -163,6 +168,7 @@
 			reg = <0x3100 0x100>;
 			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x00000004 0>;
 			dfsrr;
 		};
 
@@ -174,6 +180,7 @@
 			clock-frequency = <0>;
 			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x00000002 0>;
 		};
 
 		serial1: serial@4600 {
@@ -184,6 +191,7 @@
 			clock-frequency = <0>;
 			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x00000008 0>;
 		};
 
 		spi@7000 {
@@ -196,6 +204,7 @@
 			interrupt-parent = <&mpic>;
 			mode = "cpu";
 			gpios = <&sdcsr_pio 7 0>;
+			sleep = <&pmc 0x00000800 0>;
 
 			mmc-slot@0 {
 				compatible = "fsl,mpc8610hpcd-mmc-slot",
@@ -213,6 +222,7 @@
 			reg = <0x2c000 100>;
 			interrupts = <72 2>;
 			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x04000000 0>;
 		};
 
 		mpic: interrupt-controller@40000 {
@@ -241,9 +251,18 @@
 		};
 
 		global-utilities@e0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			compatible = "fsl,mpc8610-guts";
 			reg = <0xe0000 0x1000>;
+			ranges = <0 0xe0000 0x1000>;
 			fsl,has-rstcr;
+
+			pmc: power@70 {
+				compatible = "fsl,mpc8610-pmc",
+					     "fsl,mpc8641d-pmc";
+				reg = <0x70 0x20>;
+			};
 		};
 
 		wdt@e4000 {
@@ -262,6 +281,7 @@
 			fsl,playback-dma = <&dma00>;
 			fsl,capture-dma = <&dma01>;
 			fsl,fifo-depth = <8>;
+			sleep = <&pmc 0 0x08000000>;
 		};
 
 		ssi@16100 {
@@ -271,6 +291,7 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <63 2>;
 			fsl,fifo-depth = <8>;
+			sleep = <&pmc 0 0x04000000>;
 		};
 
 		dma@21300 {
@@ -280,6 +301,7 @@
 			cell-index = <0>;
 			reg = <0x21300 0x4>; /* DMA general status register */
 			ranges = <0x0 0x21100 0x200>;
+			sleep = <&pmc 0x00000400 0>;
 
 			dma00: dma-channel@0 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -322,6 +344,7 @@
 			cell-index = <1>;
 			reg = <0xc300 0x4>; /* DMA general status register */
 			ranges = <0x0 0xc100 0x200>;
+			sleep = <&pmc 0x00000200 0>;
 
 			dma-channel@0 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -369,6 +392,7 @@
 		bus-range = <0 0>;
 		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 			  0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>;
+		sleep = <&pmc 0x80000000 0>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
@@ -398,6 +422,7 @@
 		bus-range = <1 3>;
 		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
 			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+		sleep = <&pmc 0x40000000 0>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <26 2>;
@@ -474,6 +499,7 @@
 				 0x0000 0 0 4 &mpic 7 1>;
 		interrupt-parent = <&mpic>;
 		interrupts = <25 2>;
+		sleep = <&pmc 0x20000000 0>;
 		clock-frequency = <33333333>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
new file mode 100644
index 000000000000..df5269093af8
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -0,0 +1,477 @@
+/*
+ * P1020 RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P1020";
+	compatible = "fsl,P1020RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 256KB for Vitesse 7385 Switch firmware */
+				reg = <0x0 0x00040000>;
+				label = "NOR (RO) Vitesse-7385 Firmware";
+				read-only;
+			};
+
+			partition@40000 {
+				/* 256KB for DTB Image */
+				reg = <0x00040000 0x00040000>;
+				label = "NOR (RO) DTB Image";
+				read-only;
+			};
+
+			partition@80000 {
+				/* 3.5 MB for Linux Kernel Image */
+				reg = <0x00080000 0x00380000>;
+				label = "NOR (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@400000 {
+				/* 11MB for JFFS2 based Root file System */
+				reg = <0x00400000 0x00b00000>;
+				label = "NOR (RW) JFFS2 Root File System";
+			};
+
+			partition@f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x00f00000 0x00100000>;
+				label = "NOR (RO) U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1020-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 4MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00400000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@a00000 {
+				/* 7MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00700000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 15MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00f00000>;
+				label = "NAND (RW) Writable User area";
+			};
+		};
+
+		L2switch@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "vitesse-7385";
+			reg = <0x2 0x0 0x20000>;
+		};
+
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p1020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p1020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <16 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p1020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				modal = "s25sl128b";
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image */
+					reg = <0x00080000 0x00080000>;
+					label = "SPI (RO) DTB Image";
+					read-only;
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI (RO) Linux Kernel Image";
+					read-only;
+				};
+
+				partition@500000 {
+					/* 4MB for Compressed RFS Image */
+					reg = <0x00500000 0x00400000>;
+					label = "SPI (RO) Compressed RFS Image";
+					read-only;
+				};
+
+				partition@900000 {
+					/* 7MB for JFFS2 based RFS */
+					reg = <0x00900000 0x00700000>;
+					label = "SPI (RW) JFFS2 RFS";
+				};
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p1020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>; // L2,256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		usb@23000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <46 0x2>;
+			phy_type = "ulpi";
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p1020-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p1020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
new file mode 100644
index 000000000000..0fe93d0c8b2e
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
@@ -0,0 +1,363 @@
+/*
+ * P2020 RDB  Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, dma1, usb,
+ * eth1, eth2, sdhc, crypto, global-util, pci0.
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P2020";
+	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p2020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p2020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p2020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				modal = "s25sl128b";
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image */
+					reg = <0x00080000 0x00080000>;
+					label = "SPI (RO) DTB Image";
+					read-only;
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI (RO) Linux Kernel Image";
+					read-only;
+				};
+
+				partition@500000 {
+					/* 4MB for Compressed RFS Image */
+					reg = <0x00500000 0x00400000>;
+					label = "SPI (RO) Compressed RFS Image";
+					read-only;
+				};
+
+				partition@900000 {
+					/* 7MB for JFFS2 based RFS */
+					reg = <0x00900000 0x00700000>;
+					label = "SPI (RW) JFFS2 RFS";
+				};
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p2020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>; // L2,512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1>;
+				reg = <0x1>;
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			protected-sources = <
+			42 76 77 78 79 /* serial1 , dma2 */
+			29 30 34 26 /* enet0, pci1 */
+			0xe0 0xe1 0xe2 0xe3 /* msi */
+			0xe4 0xe5 0xe6 0xe7
+			>;
+		};
+
+		global-utilities@e0000 {
+			compatible = "fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
new file mode 100644
index 000000000000..e95a51285328
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
@@ -0,0 +1,184 @@
+/*
+ * P2020 RDB Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, dma2, eth0, pci1, msi.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P2020";
+	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		serial0 = &serial0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p2020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		serial0: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p2020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>; // L2,512K
+			interrupt-parent = <&mpic>;
+		};
+
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			protected-sources = <
+			17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */
+			16 20 21 22 23 28 	/* L2, dma1, USB */
+			03 35 36 40 31 32 33 	/* mdio, enet1, enet2 */
+			72 45 58 25 		/* sdhci, crypto , pci */
+			>;
+		};
+
+		msi@41600 {
+			compatible = "fsl,p2020-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
new file mode 100644
index 000000000000..6b29eab05362
--- /dev/null
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -0,0 +1,554 @@
+/*
+ * P4080DS Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,P4080DS";
+	compatible = "fsl,P4080DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ccsr = &soc;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+
+		rio0 = &rapidio0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,4080@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			};
+		};
+		cpu1: PowerPC,4080@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+			};
+		};
+		cpu2: PowerPC,4080@2 {
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2_2>;
+			L2_2: l2-cache {
+			};
+		};
+		cpu3: PowerPC,4080@3 {
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2_3>;
+			L2_3: l2-cache {
+			};
+		};
+		cpu4: PowerPC,4080@4 {
+			device_type = "cpu";
+			reg = <4>;
+			next-level-cache = <&L2_4>;
+			L2_4: l2-cache {
+			};
+		};
+		cpu5: PowerPC,4080@5 {
+			device_type = "cpu";
+			reg = <5>;
+			next-level-cache = <&L2_5>;
+			L2_5: l2-cache {
+			};
+		};
+		cpu6: PowerPC,4080@6 {
+			device_type = "cpu";
+			reg = <6>;
+			next-level-cache = <&L2_6>;
+			L2_6: l2-cache {
+			};
+		};
+		cpu7: PowerPC,4080@7 {
+			device_type = "cpu";
+			reg = <7>;
+			next-level-cache = <&L2_7>;
+			L2_7: l2-cache {
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc: soc@ffe000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		corenet-law@0 {
+			compatible = "fsl,corenet-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <32>;
+		};
+
+		memory-controller@8000 {
+			compatible = "fsl,p4080-memory-controller";
+			reg = <0x8000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <0x12 2>;
+		};
+
+		memory-controller@9000 {
+			compatible = "fsl,p4080-memory-controller";
+			reg = <0x9000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <0x12 2>;
+		};
+
+		corenet-cf@18000 {
+			compatible = "fsl,corenet-cf";
+			reg = <0x18000 0x1000>;
+			fsl,ccf-num-csdids = <32>;
+			fsl,ccf-num-snoopids = <32>;
+		};
+
+		iommu@20000 {
+			compatible = "fsl,p4080-pamu";
+			reg = <0x20000 0x10000>;
+			interrupts = <24 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		dma0: dma@100300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
+			reg = <0x100300 0x4>;
+			ranges = <0x0 0x100100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,p4080-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <28 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,p4080-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <29 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,p4080-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <30 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,p4080-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <31 2>;
+			};
+		};
+
+		dma1: dma@101300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
+			reg = <0x101300 0x4>;
+			ranges = <0x0 0x101100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,p4080-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <32 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,p4080-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <33 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,p4080-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <34 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,p4080-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <35 2>;
+			};
+		};
+
+		spi@110000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x110000 0x1000>;
+			interrupts = <53 0x2>;
+			interrupt-parent = <&mpic>;
+			espi,num-ss-bits = <4>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		sdhc: sdhc@114000 {
+			compatible = "fsl,p4080-esdhc", "fsl,esdhc";
+			reg = <0x114000 0x1000>;
+			interrupts = <48 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		i2c@118000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x118000 0x100>;
+			interrupts = <38 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@118100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x118100 0x100>;
+			interrupts = <38 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			eeprom@51 {
+				compatible = "at24,24c256";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "at24,24c256";
+				reg = <0x52>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0 0x1>;
+				interrupt-parent = <&mpic>;
+			};
+		};
+
+		i2c@119000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <2>;
+			compatible = "fsl-i2c";
+			reg = <0x119000 0x100>;
+			interrupts = <39 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@119100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <3>;
+			compatible = "fsl-i2c";
+			reg = <0x119100 0x100>;
+			interrupts = <39 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@11c500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11c500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <36 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@11c600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11c600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <36 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial2: serial@11d500 {
+			cell-index = <2>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11d500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <37 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial3: serial@11d600 {
+			cell-index = <3>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x11d600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <37 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		gpio0: gpio@130000 {
+			compatible = "fsl,p4080-gpio";
+			reg = <0x130000 0x1000>;
+			interrupts = <55 2>;
+			interrupt-parent = <&mpic>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		usb0: usb@210000 {
+			compatible = "fsl,p4080-usb2-mph",
+					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+			reg = <0x210000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <44 0x2>;
+			phy_type = "ulpi";
+		};
+
+		usb1: usb@211000 {
+			compatible = "fsl,p4080-usb2-dr",
+					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+			reg = <0x211000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <45 0x2>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+	};
+
+	rapidio0: rapidio@ffe0c0000 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "fsl,rapidio-delta";
+		reg = <0xf 0xfe0c0000 0 0x20000>;
+		ranges = <0 0 0xf 0xf5000000 0 0x01000000>;
+		interrupt-parent = <&mpic>;
+		/* err_irq bell_outb_irq bell_inb_irq
+			msg1_tx_irq msg1_rx_irq	msg2_tx_irq msg2_rx_irq */
+		interrupts = <16 2 56 2 57 2 60 2 61 2 62 2 63 2>;
+	};
+
+	localbus@ffe124000 {
+		compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xf 0xfe124000 0 0x1000>;
+		interrupts = <25 2>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xf 0xe8000000 0x08000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		compatible = "fsl,p4080-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xfe200000 0 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		clock-frequency = <0x1fca055>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		compatible = "fsl,p4080-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xfe201000 0 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		clock-frequency = <0x1fca055>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		compatible = "fsl,p4080-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xfe202000 0 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		clock-frequency = <0x1fca055>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1
+			0000 0 0 2 &mpic 9 1
+			0000 0 0 3 &mpic 10 1
+			0000 0 0 4 &mpic 11 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts
index ad402c488741..d2af32e2bf7a 100644
--- a/arch/powerpc/boot/dts/redwood.dts
+++ b/arch/powerpc/boot/dts/redwood.dts
@@ -226,6 +226,7 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
index 1fa3cb4c4ebb..64923245f0e5 100644
--- a/arch/powerpc/boot/dts/yosemite.dts
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -282,20 +282,10 @@
 			/* Inbound 2GB range starting at 0 */
 			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
-			/* Bamboo has all 4 IRQ pins tied together per slot */
 			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
-				/* IDSEL 1 */
-				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
-
-				/* IDSEL 2 */
-				0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
-
-				/* IDSEL 3 */
-				0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
-
-				/* IDSEL 4 */
-				0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
+				/* IDSEL 12 */
+				0x6000 0x0 0x0 0x0 &UIC0 0x19 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index 28980738776c..6cd2cd65c2cd 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -218,7 +218,7 @@ CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index e199d1cacbaf..a6a3768f7304 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -218,7 +218,7 @@ CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 3b0fbfb28efd..1975d41e0763 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -219,7 +219,7 @@ CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
@@ -1124,7 +1124,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
+CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index f1889abb89b1..c568329723b8 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1683,7 +1683,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HCALL_STATS=y
+# CONFIG_HCALL_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index ba667a383b8c..ab9e402518e8 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -25,6 +25,7 @@
 #define flush_cache_vmap(start, end)		do { } while (0)
 #define flush_cache_vunmap(start, end)		do { } while (0)
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *page);
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 24d79e3abd8e..0835eb977ba9 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -3,8 +3,47 @@
 
 #include <linux/compiler.h>
 #include <linux/types.h>
+#include <linux/errno.h>
 #include <linux/of.h>
 
+/*
+ * USB Controller pram common to QE and CPM.
+ */
+struct usb_ctlr {
+	u8	usb_usmod;
+	u8	usb_usadr;
+	u8	usb_uscom;
+	u8	res1[1];
+	__be16	usb_usep[4];
+	u8	res2[4];
+	__be16	usb_usber;
+	u8	res3[2];
+	__be16	usb_usbmr;
+	u8	res4[1];
+	u8	usb_usbs;
+	/* Fields down below are QE-only */
+	__be16	usb_ussft;
+	u8	res5[2];
+	__be16	usb_usfrn;
+	u8	res6[0x22];
+} __attribute__ ((packed));
+
+/*
+ * Function code bits, usually generic to devices.
+ */
+#ifdef CONFIG_CPM1
+#define CPMFCR_GBL	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
+#define CPMFCR_TC2	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
+#define CPMFCR_DTB	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
+#define CPMFCR_BDB	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
+#else
+#define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
+#define CPMFCR_TC2	((u_char)0x04)	/* Transfer code 2 value */
+#define CPMFCR_DTB	((u_char)0x02)	/* Use local bus for data when set */
+#define CPMFCR_BDB	((u_char)0x01)	/* Use local bus for BD when set */
+#endif
+#define CPMFCR_EB	((u_char)0x10)	/* Set big endian byte order */
+
 /* Opcodes common to CPM1 and CPM2
 */
 #define CPM_CR_INIT_TRX		((ushort)0x0000)
@@ -93,13 +132,56 @@ typedef struct cpm_buf_desc {
 #define BD_I2C_START		(0x0400)
 
 int cpm_muram_init(void);
+
+#if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE)
 unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
 int cpm_muram_free(unsigned long offset);
 unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
 void __iomem *cpm_muram_addr(unsigned long offset);
 unsigned long cpm_muram_offset(void __iomem *addr);
 dma_addr_t cpm_muram_dma(void __iomem *addr);
+#else
+static inline unsigned long cpm_muram_alloc(unsigned long size,
+					    unsigned long align)
+{
+	return -ENOSYS;
+}
+
+static inline int cpm_muram_free(unsigned long offset)
+{
+	return -ENOSYS;
+}
+
+static inline unsigned long cpm_muram_alloc_fixed(unsigned long offset,
+						  unsigned long size)
+{
+	return -ENOSYS;
+}
+
+static inline void __iomem *cpm_muram_addr(unsigned long offset)
+{
+	return NULL;
+}
+
+static inline unsigned long cpm_muram_offset(void __iomem *addr)
+{
+	return -ENOSYS;
+}
+
+static inline dma_addr_t cpm_muram_dma(void __iomem *addr)
+{
+	return 0;
+}
+#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */
+
+#ifdef CONFIG_CPM
 int cpm_command(u32 command, u8 opcode);
+#else
+static inline int cpm_command(u32 command, u8 opcode)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_CPM */
 
 int cpm2_gpiochip_add32(struct device_node *np);
 
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 7685ffde8821..81b01192f440 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -478,51 +478,6 @@ typedef struct iic {
 	char	res2[2];	/* Reserved */
 } iic_t;
 
-/* SPI parameter RAM.
-*/
-typedef struct spi {
-	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
-	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
-	u_char	spi_rfcr;	/* Rx function code */
-	u_char	spi_tfcr;	/* Tx function code */
-	ushort	spi_mrblr;	/* Max receive buffer length */
-	uint	spi_rstate;	/* Internal */
-	uint	spi_rdp;	/* Internal */
-	ushort	spi_rbptr;	/* Internal */
-	ushort	spi_rbc;	/* Internal */
-	uint	spi_rxtmp;	/* Internal */
-	uint	spi_tstate;	/* Internal */
-	uint	spi_tdp;	/* Internal */
-	ushort	spi_tbptr;	/* Internal */
-	ushort	spi_tbc;	/* Internal */
-	uint	spi_txtmp;	/* Internal */
-	uint	spi_res;
-	ushort	spi_rpbase;	/* Relocation pointer */
-	ushort	spi_res2;
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
-#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
-#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
-#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
-#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
-#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
-#define SPMODE_EN	((ushort)0x0100)	/* Enable */
-#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
-#define SPMODE_LEN4	((ushort)0x0030)	/*  4 bits per char */
-#define SPMODE_LEN8	((ushort)0x0070)	/*  8 bits per char */
-#define SPMODE_LEN16	((ushort)0x00f0)	/* 16 bits per char */
-#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
-
-/* SPIE fields */
-#define SPIE_MME	0x20
-#define SPIE_TXE	0x10
-#define SPIE_BSY	0x04
-#define SPIE_TXB	0x02
-#define SPIE_RXB	0x01
-
 /*
  * RISC Controller Configuration Register definitons
  */
diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h
index 990ff191da8b..f42e9baf3a4e 100644
--- a/arch/powerpc/include/asm/cpm2.h
+++ b/arch/powerpc/include/asm/cpm2.h
@@ -124,14 +124,6 @@ static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
 	__cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
 }
 
-/* Function code bits, usually generic to devices.
-*/
-#define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
-#define CPMFCR_EB	((u_char)0x10)	/* Set big endian byte order */
-#define CPMFCR_TC2	((u_char)0x04)	/* Transfer code 2 value */
-#define CPMFCR_DTB	((u_char)0x02)	/* Use local bus for data when set */
-#define CPMFCR_BDB	((u_char)0x01)	/* Use local bus for BD when set */
-
 /* Parameter RAM offsets from the base.
 */
 #define PROFF_SCC1		((uint)0x8000)
@@ -654,45 +646,6 @@ typedef struct iic {
 	uint	iic_txtmp;	/* Internal */
 } iic_t;
 
-/* SPI parameter RAM.
-*/
-typedef struct spi {
-	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
-	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
-	u_char	spi_rfcr;	/* Rx function code */
-	u_char	spi_tfcr;	/* Tx function code */
-	ushort	spi_mrblr;	/* Max receive buffer length */
-	uint	spi_rstate;	/* Internal */
-	uint	spi_rdp;	/* Internal */
-	ushort	spi_rbptr;	/* Internal */
-	ushort	spi_rbc;	/* Internal */
-	uint	spi_rxtmp;	/* Internal */
-	uint	spi_tstate;	/* Internal */
-	uint	spi_tdp;	/* Internal */
-	ushort	spi_tbptr;	/* Internal */
-	ushort	spi_tbc;	/* Internal */
-	uint	spi_txtmp;	/* Internal */
-	uint	spi_res;	/* Tx temp. */
-	uint	spi_res1[4];	/* SDMA temp. */
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
-#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
-#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
-#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
-#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
-#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
-#define SPMODE_EN	((ushort)0x0100)	/* Enable */
-#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
-#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
-
-#define SPMODE_LEN(x)	((((x)-1)&0xF)<<4)
-#define SPMODE_PM(x)	((x) &0xF)
-
-#define SPI_EB		((u_char)0x10)		/* big endian byte order */
-
 /* IDMA parameter RAM
 */
 typedef struct idma {
diff --git a/arch/powerpc/include/asm/emulated_ops.h b/arch/powerpc/include/asm/emulated_ops.h
index 9154e8526732..f0fb4fc1f6e6 100644
--- a/arch/powerpc/include/asm/emulated_ops.h
+++ b/arch/powerpc/include/asm/emulated_ops.h
@@ -19,6 +19,7 @@
 #define _ASM_POWERPC_EMULATED_OPS_H
 
 #include <asm/atomic.h>
+#include <linux/perf_event.h>
 
 
 #ifdef CONFIG_PPC_EMULATED_STATS
@@ -57,7 +58,7 @@ extern u32 ppc_warn_emulated;
 
 extern void ppc_warn_emulated_print(const char *type);
 
-#define PPC_WARN_EMULATED(type)						 \
+#define __PPC_WARN_EMULATED(type)					 \
 	do {								 \
 		atomic_inc(&ppc_emulated.type.val);			 \
 		if (ppc_warn_emulated)					 \
@@ -66,8 +67,22 @@ extern void ppc_warn_emulated_print(const char *type);
 
 #else /* !CONFIG_PPC_EMULATED_STATS */
 
-#define PPC_WARN_EMULATED(type)	do { } while (0)
+#define __PPC_WARN_EMULATED(type)	do { } while (0)
 
 #endif /* !CONFIG_PPC_EMULATED_STATS */
 
+#define PPC_WARN_EMULATED(type, regs)					\
+	do {								\
+		perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS,		\
+			1, 0, regs, 0);					\
+		__PPC_WARN_EMULATED(type);				\
+	} while (0)
+
+#define PPC_WARN_ALIGNMENT(type, regs)					\
+	do {								\
+		perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS,		\
+			1, 0, regs, regs->dar);				\
+		__PPC_WARN_EMULATED(type);				\
+	} while (0)
+
 #endif /* _ASM_POWERPC_EMULATED_OPS_H */
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index a98653b26231..57c400071995 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -147,6 +147,7 @@
 	.globl label##_pSeries;				\
 label##_pSeries:					\
 	HMT_MEDIUM;					\
+	DO_KVM	n;					\
 	mtspr	SPRN_SPRG_SCRATCH0,r13;		/* save r13 */	\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
 
@@ -170,6 +171,7 @@ label##_pSeries:					\
 	.globl label##_pSeries;						\
 label##_pSeries:							\
 	HMT_MEDIUM;							\
+	DO_KVM	n;							\
 	mtspr	SPRN_SPRG_SCRATCH0,r13;	/* save r13 */			\
 	mfspr	r13,SPRN_SPRG_PACA;	/* get paca address into r13 */	\
 	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h
index b1dafb6a9743..5856a66ab404 100644
--- a/arch/powerpc/include/asm/hugetlb.h
+++ b/arch/powerpc/include/asm/hugetlb.h
@@ -3,6 +3,10 @@
 
 #include <asm/page.h>
 
+pte_t *huge_pte_offset_and_shift(struct mm_struct *mm,
+				 unsigned long addr, unsigned *shift);
+
+void flush_dcache_icache_hugepage(struct page *page);
 
 int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
 			   unsigned long len);
@@ -11,12 +15,6 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
 			    unsigned long end, unsigned long floor,
 			    unsigned long ceiling);
 
-void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
-		     pte_t *ptep, pte_t pte);
-
-pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep);
-
 /*
  * The version of vma_mmu_pagesize() in arch/powerpc/mm/hugetlbpage.c needs
  * to override the version in mm/hugetlb.c
@@ -42,9 +40,26 @@ static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm)
 {
 }
 
+
+static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+	set_pte_at(mm, addr, ptep, pte);
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep)
+{
+	unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1);
+	return __pte(old);
+}
+
 static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
 					 unsigned long addr, pte_t *ptep)
 {
+	pte_t pte;
+	pte = huge_ptep_get_and_clear(vma->vm_mm, addr, ptep);
+	flush_tlb_page(vma, addr);
 }
 
 static inline int huge_pte_none(pte_t pte)
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 6251a4b10be7..f0275818b95c 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -212,6 +212,19 @@
 #define H_QUERY_INT_STATE       0x1E4
 #define H_POLL_PENDING		0x1D8
 #define H_ILLAN_ATTRIBUTES	0x244
+#define H_MODIFY_HEA_QP		0x250
+#define H_QUERY_HEA_QP		0x254
+#define H_QUERY_HEA		0x258
+#define H_QUERY_HEA_PORT	0x25C
+#define H_MODIFY_HEA_PORT	0x260
+#define H_REG_BCMC		0x264
+#define H_DEREG_BCMC		0x268
+#define H_REGISTER_HEA_RPAGES	0x26C
+#define H_DISABLE_AND_GET_HEA	0x270
+#define H_GET_HEA_INFO		0x274
+#define H_ALLOC_HEA_RESOURCE	0x278
+#define H_ADD_CONN		0x284
+#define H_DEL_CONN		0x288
 #define H_JOIN			0x298
 #define H_VASI_STATE            0x2A4
 #define H_ENABLE_CRQ		0x2B0
@@ -274,6 +287,8 @@ struct hcall_stats {
 	unsigned long	num_calls;	/* number of calls (on this CPU) */
 	unsigned long	tb_total;	/* total wall time (mftb) of calls. */
 	unsigned long	purr_total;	/* total cpu time (PURR) of calls. */
+	unsigned long	tb_start;
+	unsigned long	purr_start;
 };
 #define HCALL_STAT_ARRAY_SIZE	((MAX_HCALL_OPCODE >> 2) + 1)
 
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index abbc2aaaced5..9f4c9d4f5803 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -64,11 +64,6 @@ extern void iseries_handle_interrupts(void);
 		get_paca()->hard_enabled = 0;	\
 	} while(0)
 
-static inline int irqs_disabled_flags(unsigned long flags)
-{
-	return flags == 0;
-}
-
 #else
 
 #if defined(CONFIG_BOOKE)
diff --git a/arch/powerpc/include/asm/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h
index d4f069bf0e57..7c64fda5357b 100644
--- a/arch/powerpc/include/asm/immap_cpm2.h
+++ b/arch/powerpc/include/asm/immap_cpm2.h
@@ -549,7 +549,7 @@ typedef struct comm_proc {
 
 /* USB Controller.
 */
-typedef struct usb_ctlr {
+typedef struct cpm_usb_ctlr {
 	u8	usb_usmod;
 	u8	usb_usadr;
 	u8	usb_uscom;
diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
index c346d0bcd230..4e10f508570a 100644
--- a/arch/powerpc/include/asm/immap_qe.h
+++ b/arch/powerpc/include/asm/immap_qe.h
@@ -210,7 +210,7 @@ struct sir {
 } __attribute__ ((packed));
 
 /* USB Controller */
-struct usb_ctlr {
+struct qe_usb_ctlr {
 	u8	usb_usmod;
 	u8	usb_usadr;
 	u8	usb_uscom;
@@ -229,7 +229,7 @@ struct usb_ctlr {
 } __attribute__ ((packed));
 
 /* MCC */
-struct mcc {
+struct qe_mcc {
 	__be32	mcce;		/* MCC event register */
 	__be32	mccm;		/* MCC mask register */
 	__be32	mccf;		/* MCC configuration register */
@@ -431,9 +431,9 @@ struct qe_immap {
 	struct qe_mux		qmx;		/* QE Multiplexer */
 	struct qe_timers	qet;		/* QE Timers */
 	struct spi		spi[0x2];	/* spi */
-	struct mcc		mcc;		/* mcc */
+	struct qe_mcc		mcc;		/* mcc */
 	struct qe_brg		brg;		/* brg */
-	struct usb_ctlr		usb;		/* USB */
+	struct qe_usb_ctlr	usb;		/* USB */
 	struct si1		si1;		/* SI */
 	u8			res11[0x800];
 	struct sir		sir;		/* SI Routing Tables */
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index bbcd1aaf3dfd..e054baef1845 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -17,8 +17,6 @@
 #include <asm/atomic.h>
 
 
-#define get_irq_desc(irq) (&irq_desc[(irq)])
-
 /* Define a way to iterate across irqs. */
 #define for_each_irq(i) \
 	for ((i) = 0; (i) < NR_IRQS; ++(i))
@@ -34,12 +32,15 @@ extern atomic_t ppc_n_lost_interrupts;
  */
 #define NO_IRQ_IGNORE		((unsigned int)-1)
 
-/* Total number of virq in the platform (make it a CONFIG_* option ? */
-#define NR_IRQS		512
+/* Total number of virq in the platform */
+#define NR_IRQS		CONFIG_NR_IRQS
 
 /* Number of irqs reserved for the legacy controller */
 #define NUM_ISA_INTERRUPTS	16
 
+/* Same thing, used by the generic IRQ code */
+#define NR_IRQS_LEGACY		NUM_ISA_INTERRUPTS
+
 /* This type is the placeholder for a hardware interrupt number. It has to
  * be big enough to enclose whatever representation is used by a given
  * platform.
@@ -99,7 +100,7 @@ struct irq_host_ops {
 	 * interrupt controller has for that line)
 	 */
 	int (*xlate)(struct irq_host *h, struct device_node *ctrler,
-		     u32 *intspec, unsigned int intsize,
+		     const u32 *intspec, unsigned int intsize,
 		     irq_hw_number_t *out_hwirq, unsigned int *out_type);
 };
 
@@ -313,7 +314,7 @@ extern void irq_free_virt(unsigned int virq, unsigned int count);
  * of the of_irq_map_*() functions.
  */
 extern unsigned int irq_create_of_mapping(struct device_node *controller,
-					  u32 *intspec, unsigned int intsize);
+					  const u32 *intspec, unsigned int intsize);
 
 /**
  * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h
index bb2de6aa5ce0..81f3b0b5601e 100644
--- a/arch/powerpc/include/asm/kvm.h
+++ b/arch/powerpc/include/asm/kvm.h
@@ -46,6 +46,24 @@ struct kvm_regs {
 };
 
 struct kvm_sregs {
+	__u32 pvr;
+	union {
+		struct {
+			__u64 sdr1;
+			struct {
+				struct {
+					__u64 slbe;
+					__u64 slbv;
+				} slb[64];
+			} ppc64;
+			struct {
+				__u32 sr[16];
+				__u64 ibat[8]; 
+				__u64 dbat[8]; 
+			} ppc32;
+		} s;
+		__u8 pad[1020];
+	} u;
 };
 
 struct kvm_fpu {
diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
index 56bfae59837f..af2abe74f544 100644
--- a/arch/powerpc/include/asm/kvm_asm.h
+++ b/arch/powerpc/include/asm/kvm_asm.h
@@ -49,6 +49,46 @@
 #define BOOKE_INTERRUPT_SPE_FP_ROUND 34
 #define BOOKE_INTERRUPT_PERFORMANCE_MONITOR 35
 
+/* book3s */
+
+#define BOOK3S_INTERRUPT_SYSTEM_RESET	0x100
+#define BOOK3S_INTERRUPT_MACHINE_CHECK	0x200
+#define BOOK3S_INTERRUPT_DATA_STORAGE	0x300
+#define BOOK3S_INTERRUPT_DATA_SEGMENT	0x380
+#define BOOK3S_INTERRUPT_INST_STORAGE	0x400
+#define BOOK3S_INTERRUPT_INST_SEGMENT	0x480
+#define BOOK3S_INTERRUPT_EXTERNAL	0x500
+#define BOOK3S_INTERRUPT_ALIGNMENT	0x600
+#define BOOK3S_INTERRUPT_PROGRAM	0x700
+#define BOOK3S_INTERRUPT_FP_UNAVAIL	0x800
+#define BOOK3S_INTERRUPT_DECREMENTER	0x900
+#define BOOK3S_INTERRUPT_SYSCALL	0xc00
+#define BOOK3S_INTERRUPT_TRACE		0xd00
+#define BOOK3S_INTERRUPT_PERFMON	0xf00
+#define BOOK3S_INTERRUPT_ALTIVEC	0xf20
+#define BOOK3S_INTERRUPT_VSX		0xf40
+
+#define BOOK3S_IRQPRIO_SYSTEM_RESET		0
+#define BOOK3S_IRQPRIO_DATA_SEGMENT		1
+#define BOOK3S_IRQPRIO_INST_SEGMENT		2
+#define BOOK3S_IRQPRIO_DATA_STORAGE		3
+#define BOOK3S_IRQPRIO_INST_STORAGE		4
+#define BOOK3S_IRQPRIO_ALIGNMENT		5
+#define BOOK3S_IRQPRIO_PROGRAM			6
+#define BOOK3S_IRQPRIO_FP_UNAVAIL		7
+#define BOOK3S_IRQPRIO_ALTIVEC			8
+#define BOOK3S_IRQPRIO_VSX			9
+#define BOOK3S_IRQPRIO_SYSCALL			10
+#define BOOK3S_IRQPRIO_MACHINE_CHECK		11
+#define BOOK3S_IRQPRIO_DEBUG			12
+#define BOOK3S_IRQPRIO_EXTERNAL			13
+#define BOOK3S_IRQPRIO_DECREMENTER		14
+#define BOOK3S_IRQPRIO_PERFORMANCE_MONITOR	15
+#define BOOK3S_IRQPRIO_MAX			16
+
+#define BOOK3S_HFLAG_DCBZ32			0x1
+#define BOOK3S_HFLAG_SLB			0x2
+
 #define RESUME_FLAG_NV          (1<<0)  /* Reload guest nonvolatile state? */
 #define RESUME_FLAG_HOST        (1<<1)  /* Resume host? */
 
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
new file mode 100644
index 000000000000..74b7369770d0
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -0,0 +1,139 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOK3S_H__
+#define __ASM_KVM_BOOK3S_H__
+
+#include <linux/types.h>
+#include <linux/kvm_host.h>
+#include <asm/kvm_ppc.h>
+
+struct kvmppc_slb {
+	u64 esid;
+	u64 vsid;
+	u64 orige;
+	u64 origv;
+	bool valid;
+	bool Ks;
+	bool Kp;
+	bool nx;
+	bool large;
+	bool class;
+};
+
+struct kvmppc_sr {
+	u32 raw;
+	u32 vsid;
+	bool Ks;
+	bool Kp;
+	bool nx;
+};
+
+struct kvmppc_bat {
+	u64 raw;
+	u32 bepi;
+	u32 bepi_mask;
+	bool vs;
+	bool vp;
+	u32 brpn;
+	u8 wimg;
+	u8 pp;
+};
+
+struct kvmppc_sid_map {
+	u64 guest_vsid;
+	u64 guest_esid;
+	u64 host_vsid;
+	bool valid;
+};
+
+#define SID_MAP_BITS    9
+#define SID_MAP_NUM     (1 << SID_MAP_BITS)
+#define SID_MAP_MASK    (SID_MAP_NUM - 1)
+
+struct kvmppc_vcpu_book3s {
+	struct kvm_vcpu vcpu;
+	struct kvmppc_sid_map sid_map[SID_MAP_NUM];
+	struct kvmppc_slb slb[64];
+	struct {
+		u64 esid;
+		u64 vsid;
+	} slb_shadow[64];
+	u8 slb_shadow_max;
+	struct kvmppc_sr sr[16];
+	struct kvmppc_bat ibat[8];
+	struct kvmppc_bat dbat[8];
+	u64 hid[6];
+	int slb_nr;
+	u64 sdr1;
+	u64 dsisr;
+	u64 hior;
+	u64 msr_mask;
+	u64 vsid_first;
+	u64 vsid_next;
+	u64 vsid_max;
+	int context_id;
+};
+
+#define CONTEXT_HOST		0
+#define CONTEXT_GUEST		1
+#define CONTEXT_GUEST_END	2
+
+#define VSID_REAL	0xfffffffffff00000
+#define VSID_REAL_DR	0xffffffffffe00000
+#define VSID_REAL_IR	0xffffffffffd00000
+#define VSID_BAT	0xffffffffffc00000
+#define VSID_PR		0x8000000000000000
+
+extern void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 ea, u64 ea_mask);
+extern void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 vp, u64 vp_mask);
+extern void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, u64 pa_start, u64 pa_end);
+extern void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 new_msr);
+extern void kvmppc_mmu_book3s_64_init(struct kvm_vcpu *vcpu);
+extern void kvmppc_mmu_book3s_32_init(struct kvm_vcpu *vcpu);
+extern int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte);
+extern int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr);
+extern void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu);
+extern struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data);
+extern int kvmppc_ld(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr, bool data);
+extern int kvmppc_st(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr);
+extern void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec);
+extern void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat,
+			   bool upper, u32 val);
+
+extern u32 kvmppc_trampoline_lowmem;
+extern u32 kvmppc_trampoline_enter;
+
+static inline struct kvmppc_vcpu_book3s *to_book3s(struct kvm_vcpu *vcpu)
+{
+	return container_of(vcpu, struct kvmppc_vcpu_book3s, vcpu);
+}
+
+static inline ulong dsisr(void)
+{
+	ulong r;
+	asm ( "mfdsisr %0 " : "=r" (r) );
+	return r;
+}
+
+extern void kvm_return_point(void);
+
+#define INS_DCBZ			0x7c0007ec
+
+#endif /* __ASM_KVM_BOOK3S_H__ */
diff --git a/arch/powerpc/include/asm/kvm_book3s_64_asm.h b/arch/powerpc/include/asm/kvm_book3s_64_asm.h
new file mode 100644
index 000000000000..2e06ee8184ef
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_book3s_64_asm.h
@@ -0,0 +1,58 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOK3S_ASM_H__
+#define __ASM_KVM_BOOK3S_ASM_H__
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+
+#include <asm/kvm_asm.h>
+
+.macro DO_KVM intno
+	.if (\intno == BOOK3S_INTERRUPT_SYSTEM_RESET) || \
+	    (\intno == BOOK3S_INTERRUPT_MACHINE_CHECK) || \
+	    (\intno == BOOK3S_INTERRUPT_DATA_STORAGE) || \
+	    (\intno == BOOK3S_INTERRUPT_INST_STORAGE) || \
+	    (\intno == BOOK3S_INTERRUPT_DATA_SEGMENT) || \
+	    (\intno == BOOK3S_INTERRUPT_INST_SEGMENT) || \
+	    (\intno == BOOK3S_INTERRUPT_EXTERNAL) || \
+	    (\intno == BOOK3S_INTERRUPT_ALIGNMENT) || \
+	    (\intno == BOOK3S_INTERRUPT_PROGRAM) || \
+	    (\intno == BOOK3S_INTERRUPT_FP_UNAVAIL) || \
+	    (\intno == BOOK3S_INTERRUPT_DECREMENTER) || \
+	    (\intno == BOOK3S_INTERRUPT_SYSCALL) || \
+	    (\intno == BOOK3S_INTERRUPT_TRACE) || \
+	    (\intno == BOOK3S_INTERRUPT_PERFMON) || \
+	    (\intno == BOOK3S_INTERRUPT_ALTIVEC) || \
+	    (\intno == BOOK3S_INTERRUPT_VSX)
+
+	b	kvmppc_trampoline_\intno
+kvmppc_resume_\intno:
+
+	.endif
+.endm
+
+#else
+
+.macro DO_KVM intno
+.endm
+
+#endif /* CONFIG_KVM_BOOK3S_64_HANDLER */
+
+#endif /* __ASM_KVM_BOOK3S_ASM_H__ */
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index c9c930ed11d7..1201f62d0d73 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -21,7 +21,8 @@
 #define __POWERPC_KVM_HOST_H__
 
 #include <linux/mutex.h>
-#include <linux/timer.h>
+#include <linux/hrtimer.h>
+#include <linux/interrupt.h>
 #include <linux/types.h>
 #include <linux/kvm_types.h>
 #include <asm/kvm_asm.h>
@@ -37,6 +38,8 @@
 #define KVM_NR_PAGE_SIZES	1
 #define KVM_PAGES_PER_HPAGE(x)	(1UL<<31)
 
+#define HPTEG_CACHE_NUM 1024
+
 struct kvm;
 struct kvm_run;
 struct kvm_vcpu;
@@ -63,6 +66,17 @@ struct kvm_vcpu_stat {
 	u32 dec_exits;
 	u32 ext_intr_exits;
 	u32 halt_wakeup;
+#ifdef CONFIG_PPC64
+	u32 pf_storage;
+	u32 pf_instruc;
+	u32 sp_storage;
+	u32 sp_instruc;
+	u32 queue_intr;
+	u32 ld;
+	u32 ld_slow;
+	u32 st;
+	u32 st_slow;
+#endif
 };
 
 enum kvm_exit_types {
@@ -109,9 +123,53 @@ struct kvmppc_exit_timing {
 struct kvm_arch {
 };
 
+struct kvmppc_pte {
+	u64 eaddr;
+	u64 vpage;
+	u64 raddr;
+	bool may_read;
+	bool may_write;
+	bool may_execute;
+};
+
+struct kvmppc_mmu {
+	/* book3s_64 only */
+	void (*slbmte)(struct kvm_vcpu *vcpu, u64 rb, u64 rs);
+	u64  (*slbmfee)(struct kvm_vcpu *vcpu, u64 slb_nr);
+	u64  (*slbmfev)(struct kvm_vcpu *vcpu, u64 slb_nr);
+	void (*slbie)(struct kvm_vcpu *vcpu, u64 slb_nr);
+	void (*slbia)(struct kvm_vcpu *vcpu);
+	/* book3s */
+	void (*mtsrin)(struct kvm_vcpu *vcpu, u32 srnum, ulong value);
+	u32  (*mfsrin)(struct kvm_vcpu *vcpu, u32 srnum);
+	int  (*xlate)(struct kvm_vcpu *vcpu, gva_t eaddr, struct kvmppc_pte *pte, bool data);
+	void (*reset_msr)(struct kvm_vcpu *vcpu);
+	void (*tlbie)(struct kvm_vcpu *vcpu, ulong addr, bool large);
+	int  (*esid_to_vsid)(struct kvm_vcpu *vcpu, u64 esid, u64 *vsid);
+	u64  (*ea_to_vp)(struct kvm_vcpu *vcpu, gva_t eaddr, bool data);
+	bool (*is_dcbz32)(struct kvm_vcpu *vcpu);
+};
+
+struct hpte_cache {
+	u64 host_va;
+	u64 pfn;
+	ulong slot;
+	struct kvmppc_pte pte;
+};
+
 struct kvm_vcpu_arch {
-	u32 host_stack;
+	ulong host_stack;
 	u32 host_pid;
+#ifdef CONFIG_PPC64
+	ulong host_msr;
+	ulong host_r2;
+	void *host_retip;
+	ulong trampoline_lowmem;
+	ulong trampoline_enter;
+	ulong highmem_handler;
+	ulong host_paca_phys;
+	struct kvmppc_mmu mmu;
+#endif
 
 	u64 fpr[32];
 	ulong gpr[32];
@@ -123,6 +181,10 @@ struct kvm_vcpu_arch {
 	ulong xer;
 
 	ulong msr;
+#ifdef CONFIG_PPC64
+	ulong shadow_msr;
+	ulong hflags;
+#endif
 	u32 mmucr;
 	ulong sprg0;
 	ulong sprg1;
@@ -149,6 +211,7 @@ struct kvm_vcpu_arch {
 	u32 ivor[64];
 	ulong ivpr;
 	u32 pir;
+	u32 pvr;
 
 	u32 shadow_pid;
 	u32 pid;
@@ -174,6 +237,9 @@ struct kvm_vcpu_arch {
 #endif
 
 	u32 last_inst;
+#ifdef CONFIG_PPC64
+	ulong fault_dsisr;
+#endif
 	ulong fault_dear;
 	ulong fault_esr;
 	gpa_t paddr_accessed;
@@ -185,8 +251,15 @@ struct kvm_vcpu_arch {
 
 	u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
 
-	struct timer_list dec_timer;
+	struct hrtimer dec_timer;
+	struct tasklet_struct tasklet;
+	u64 dec_jiffies;
 	unsigned long pending_exceptions;
+
+#ifdef CONFIG_PPC64
+	struct hpte_cache hpte_cache[HPTEG_CACHE_NUM];
+	int hpte_cache_offset;
+#endif
 };
 
 #endif /* __POWERPC_KVM_HOST_H__ */
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 2c6ee349df5e..269ee46ab028 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -39,6 +39,7 @@ enum emulation_result {
 extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
 extern char kvmppc_handlers_start[];
 extern unsigned long kvmppc_handler_len;
+extern void kvmppc_handler_highmem(void);
 
 extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu);
 extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index f78f65c38f05..14b592dfb4e8 100644
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -100,7 +100,14 @@ struct lppaca {
 	// Used to pass parms from the OS to PLIC for SetAsrAndRfid
 	u64	saved_gpr3;		// Saved GPR3                   x20-x27
 	u64	saved_gpr4;		// Saved GPR4                   x28-x2F
-	u64	saved_gpr5;		// Saved GPR5                   x30-x37
+	union {
+		u64	saved_gpr5;	/* Saved GPR5               x30-x37 */
+		struct {
+			u8	cede_latency_hint;  /*			x30 */
+			u8	reserved[7];        /*		    x31-x36 */
+		} fields;
+	} gpr5_dword;
+
 
 	u8	dtl_enable_mask;	// Dispatch Trace Log mask	x38-x38
 	u8	donate_dedicated_cpu;	// Donate dedicated CPU cycles  x39-x39
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 9efa2be78331..9f0fc9e6ce0d 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -266,6 +266,11 @@ struct machdep_calls {
 	void (*suspend_disable_irqs)(void);
 	void (*suspend_enable_irqs)(void);
 #endif
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+	ssize_t (*cpu_probe)(const char *, size_t);
+	ssize_t (*cpu_release)(const char *, size_t);
+#endif
 };
 
 extern void e500_idle(void);
diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h
index 079c06eae446..a062c57696d0 100644
--- a/arch/powerpc/include/asm/macio.h
+++ b/arch/powerpc/include/asm/macio.h
@@ -39,6 +39,7 @@ struct macio_dev
 	struct macio_bus	*bus;		/* macio bus this device is on */
 	struct macio_dev	*media_bay;	/* Device is part of a media bay */
 	struct of_device	ofdev;
+	struct device_dma_parameters dma_parms; /* ide needs that */
 	int			n_resources;
 	struct resource		resource[MACIO_DEV_COUNT_RESOURCES];
 	int			n_interrupts;
@@ -78,6 +79,8 @@ static inline unsigned long macio_resource_len(struct macio_dev *dev, int resour
 	return res->end - res->start + 1;
 }
 
+extern int macio_enable_devres(struct macio_dev *dev);
+
 extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name);
 extern void macio_release_resource(struct macio_dev *dev, int resource_no);
 extern int macio_request_resources(struct macio_dev *dev, const char *name);
@@ -131,6 +134,9 @@ struct macio_driver
 	int	(*resume)(struct macio_dev* dev);
 	int	(*shutdown)(struct macio_dev* dev);
 
+#ifdef CONFIG_PMAC_MEDIABAY
+	void	(*mediabay_event)(struct macio_dev* dev, int mb_state);
+#endif
 	struct device_driver	driver;
 };
 #define	to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
diff --git a/arch/powerpc/include/asm/mediabay.h b/arch/powerpc/include/asm/mediabay.h
index b2efb3325808..11037a4133ee 100644
--- a/arch/powerpc/include/asm/mediabay.h
+++ b/arch/powerpc/include/asm/mediabay.h
@@ -17,26 +17,31 @@
 #define MB_POWER	6	/* media bay contains a Power device (???) */
 #define MB_NO		7	/* media bay contains nothing */
 
-/* Number of bays in the machine or 0 */
-extern int media_bay_count;
+struct macio_dev;
 
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-#include <linux/ide.h>
+#ifdef CONFIG_PMAC_MEDIABAY
 
-int check_media_bay_by_base(unsigned long base, int what);
-/* called by IDE PMAC host driver to register IDE controller for media bay */
-int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
-			    int irq, ide_hwif_t *hwif);
+/* Check the content type of the bay, returns MB_NO if the bay is still
+ * transitionning
+ */
+extern int check_media_bay(struct macio_dev *bay);
 
-int check_media_bay(struct device_node *which_bay, int what);
+/* The ATA driver uses the calls below to temporarily hold on the
+ * media bay callbacks while initializing the interface
+ */
+extern void lock_media_bay(struct macio_dev *bay);
+extern void unlock_media_bay(struct macio_dev *bay);
 
 #else
 
-static inline int check_media_bay(struct device_node *which_bay, int what)
+static inline int check_media_bay(struct macio_dev *bay)
 {
-	return -ENODEV;
+	return MB_NO;
 }
 
+static inline void lock_media_bay(struct macio_dev *bay) { }
+static inline void unlock_media_bay(struct macio_dev *bay) { }
+
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index bebe31c2e907..2102b214a87c 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -173,14 +173,6 @@ extern unsigned long tce_alloc_start, tce_alloc_end;
  */
 extern int mmu_ci_restrictions;
 
-#ifdef CONFIG_HUGETLB_PAGE
-/*
- * The page size indexes of the huge pages for use by hugetlbfs
- */
-extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT];
-
-#endif /* CONFIG_HUGETLB_PAGE */
-
 /*
  * This function sets the AVPN and L fields of the HPTE  appropriately
  * for the page size
@@ -253,10 +245,11 @@ extern int __hash_page_64K(unsigned long ea, unsigned long access,
 			   unsigned long vsid, pte_t *ptep, unsigned long trap,
 			   unsigned int local, int ssize);
 struct mm_struct;
+unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap);
 extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap);
-extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
-			  unsigned long ea, unsigned long vsid, int local,
-			  unsigned long trap);
+int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
+		     pte_t *ptep, unsigned long trap, int local, int ssize,
+		     unsigned int shift, unsigned int mmu_psize);
 
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 			     unsigned long pstart, unsigned long prot,
@@ -380,6 +373,38 @@ extern void slb_set_size(u16 size);
 
 #ifndef __ASSEMBLY__
 
+#ifdef CONFIG_PPC_SUBPAGE_PROT
+/*
+ * For the sub-page protection option, we extend the PGD with one of
+ * these.  Basically we have a 3-level tree, with the top level being
+ * the protptrs array.  To optimize speed and memory consumption when
+ * only addresses < 4GB are being protected, pointers to the first
+ * four pages of sub-page protection words are stored in the low_prot
+ * array.
+ * Each page of sub-page protection words protects 1GB (4 bytes
+ * protects 64k).  For the 3-level tree, each page of pointers then
+ * protects 8TB.
+ */
+struct subpage_prot_table {
+	unsigned long maxaddr;	/* only addresses < this are protected */
+	unsigned int **protptrs[2];
+	unsigned int *low_prot[4];
+};
+
+#define SBP_L1_BITS		(PAGE_SHIFT - 2)
+#define SBP_L2_BITS		(PAGE_SHIFT - 3)
+#define SBP_L1_COUNT		(1 << SBP_L1_BITS)
+#define SBP_L2_COUNT		(1 << SBP_L2_BITS)
+#define SBP_L2_SHIFT		(PAGE_SHIFT + SBP_L1_BITS)
+#define SBP_L3_SHIFT		(SBP_L2_SHIFT + SBP_L2_BITS)
+
+extern void subpage_prot_free(struct mm_struct *mm);
+extern void subpage_prot_init_new_context(struct mm_struct *mm);
+#else
+static inline void subpage_prot_free(struct mm_struct *mm) {}
+static inline void subpage_prot_init_new_context(struct mm_struct *mm) { }
+#endif /* CONFIG_PPC_SUBPAGE_PROT */
+
 typedef unsigned long mm_context_id_t;
 
 typedef struct {
@@ -393,6 +418,9 @@ typedef struct {
 	u16 sllp;		/* SLB page size encoding */
 #endif
 	unsigned long vdso_base;
+#ifdef CONFIG_PPC_SUBPAGE_PROT
+	struct subpage_prot_table spt;
+#endif /* CONFIG_PPC_SUBPAGE_PROT */
 } mm_context_t;
 
 
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index b34e94d94435..26383e0778aa 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -23,6 +23,8 @@ extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
 extern void set_context(unsigned long id, pgd_t *pgd);
 
 #ifdef CONFIG_PPC_BOOK3S_64
+extern int __init_new_context(void);
+extern void __destroy_context(int context_id);
 static inline void mmu_context_init(void) { }
 #else
 extern void mmu_context_init(void);
diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
index 1b4f697abbdd..b664ce79a172 100644
--- a/arch/powerpc/include/asm/mpc52xx.h
+++ b/arch/powerpc/include/asm/mpc52xx.h
@@ -276,6 +276,53 @@ extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv);
 extern unsigned int mpc52xx_get_xtal_freq(struct device_node *node);
 extern void mpc52xx_restart(char *cmd);
 
+/* mpc52xx_gpt.c */
+struct mpc52xx_gpt_priv;
+extern struct mpc52xx_gpt_priv *mpc52xx_gpt_from_irq(int irq);
+extern int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, u64 period,
+                            int continuous);
+extern u64 mpc52xx_gpt_timer_period(struct mpc52xx_gpt_priv *gpt);
+extern int mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt);
+
+/* mpc52xx_lpbfifo.c */
+#define MPC52XX_LPBFIFO_FLAG_READ		(0)
+#define MPC52XX_LPBFIFO_FLAG_WRITE		(1<<0)
+#define MPC52XX_LPBFIFO_FLAG_NO_INCREMENT	(1<<1)
+#define MPC52XX_LPBFIFO_FLAG_NO_DMA		(1<<2)
+#define MPC52XX_LPBFIFO_FLAG_POLL_DMA		(1<<3)
+
+struct mpc52xx_lpbfifo_request {
+	struct list_head list;
+
+	/* localplus bus address */
+	unsigned int cs;
+	size_t offset;
+
+	/* Memory address */
+	void *data;
+	phys_addr_t data_phys;
+
+	/* Details of transfer */
+	size_t size;
+	size_t pos;	/* current position of transfer */
+	int flags;
+
+	/* What to do when finished */
+	void (*callback)(struct mpc52xx_lpbfifo_request *);
+
+	void *priv;		/* Driver private data */
+
+	/* statistics */
+	int irq_count;
+	int irq_ticks;
+	u8 last_byte;
+	int buffer_not_done_cnt;
+};
+
+extern int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req);
+extern void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req);
+extern void mpc52xx_lpbfifo_poll(void);
+
 /* mpc52xx_pic.c */
 extern void mpc52xx_init_irq(void);
 extern unsigned int mpc52xx_get_irq(void);
diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h
index 6c587eddee59..850b72f27445 100644
--- a/arch/powerpc/include/asm/nvram.h
+++ b/arch/powerpc/include/asm/nvram.h
@@ -73,7 +73,6 @@ extern int nvram_write_error_log(char * buff, int length,
 extern int nvram_read_error_log(char * buff, int length,
 					 unsigned int * err_type, unsigned int *err_seq);
 extern int nvram_clear_error_log(void);
-extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
 
 extern int pSeries_nvram_init(void);
 
diff --git a/arch/powerpc/include/asm/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h
index e482e5352e69..d4b4bfa26fb3 100644
--- a/arch/powerpc/include/asm/pSeries_reconfig.h
+++ b/arch/powerpc/include/asm/pSeries_reconfig.h
@@ -17,6 +17,7 @@
 #ifdef CONFIG_PPC_PSERIES
 extern int pSeries_reconfig_notifier_register(struct notifier_block *);
 extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
+extern struct blocking_notifier_head pSeries_reconfig_chain;
 #else /* !CONFIG_PPC_PSERIES */
 static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
 {
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 7d8514ceceae..5e9b4ef71415 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -129,6 +129,15 @@ struct paca_struct {
 	u64 system_time;		/* accumulated system TB ticks */
 	u64 startpurr;			/* PURR/TB value snapshot */
 	u64 startspurr;			/* SPURR value snapshot */
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+	struct  {
+		u64     esid;
+		u64     vsid;
+	} kvm_slb[64];			/* guest SLB */
+	u8 kvm_slb_max;			/* highest used guest slb entry */
+	u8 kvm_in_guest;		/* are we inside the guest? */
+#endif
 };
 
 extern struct paca_struct paca[];
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index ff24254990e1..e96d52a516ba 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -229,6 +229,20 @@ typedef unsigned long pgprot_t;
 
 #endif
 
+typedef struct { signed long pd; } hugepd_t;
+#define HUGEPD_SHIFT_MASK     0x3f
+
+#ifdef CONFIG_HUGETLB_PAGE
+static inline int hugepd_ok(hugepd_t hpd)
+{
+	return (hpd.pd > 0);
+}
+
+#define is_hugepd(pdep)               (hugepd_ok(*((hugepd_t *)(pdep))))
+#else /* CONFIG_HUGETLB_PAGE */
+#define is_hugepd(pdep)			0
+#endif /* CONFIG_HUGETLB_PAGE */
+
 struct page;
 extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
 extern void copy_user_page(void *to, void *from, unsigned long vaddr,
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index 3f17b83f55a1..bfc4e027e2ad 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -90,7 +90,7 @@ extern unsigned int HPAGE_SHIFT;
 #define HPAGE_SIZE		((1UL) << HPAGE_SHIFT)
 #define HPAGE_MASK		(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
-#define HUGE_MAX_HSTATE		3
+#define HUGE_MAX_HSTATE		(MMU_PAGE_COUNT-1)
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
index c9500d666a1d..580cf73b96e8 100644
--- a/arch/powerpc/include/asm/pgalloc-32.h
+++ b/arch/powerpc/include/asm/pgalloc-32.h
@@ -3,7 +3,8 @@
 
 #include <linux/threads.h>
 
-#define PTE_NONCACHE_NUM	0  /* dummy for now to share code w/ppc64 */
+/* For 32-bit, all levels of page tables are just drawn from get_free_page() */
+#define MAX_PGTABLE_INDEX_SIZE	0
 
 extern void __bad_pte(pmd_t *pmd);
 
@@ -36,11 +37,10 @@ extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
 extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
 extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr);
 
-static inline void pgtable_free(pgtable_free_t pgf)
+static inline void pgtable_free(void *table, unsigned index_size)
 {
-	void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
-
-	free_page((unsigned long)p);
+	BUG_ON(index_size); /* 32-bit doesn't use this */
+	free_page((unsigned long)table);
 }
 
 #define check_pgt_cache()	do { } while (0)
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index e6f069c4f713..605f5c5398d1 100644
--- a/arch/powerpc/include/asm/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -11,27 +11,34 @@
 #include <linux/cpumask.h>
 #include <linux/percpu.h>
 
-#ifndef CONFIG_PPC_SUBPAGE_PROT
-static inline void subpage_prot_free(pgd_t *pgd) {}
-#endif
+/*
+ * Functions that deal with pagetables that could be at any level of
+ * the table need to be passed an "index_size" so they know how to
+ * handle allocation.  For PTE pages (which are linked to a struct
+ * page for now, and drawn from the main get_free_pages() pool), the
+ * allocation size will be (2^index_size * sizeof(pointer)) and
+ * allocations are drawn from the kmem_cache in PGT_CACHE(index_size).
+ *
+ * The maximum index size needs to be big enough to allow any
+ * pagetable sizes we need, but small enough to fit in the low bits of
+ * any page table pointer.  In other words all pagetables, even tiny
+ * ones, must be aligned to allow at least enough low 0 bits to
+ * contain this value.  This value is also used as a mask, so it must
+ * be one less than a power of two.
+ */
+#define MAX_PGTABLE_INDEX_SIZE	0xf
 
 extern struct kmem_cache *pgtable_cache[];
-
-#define PGD_CACHE_NUM		0
-#define PUD_CACHE_NUM		1
-#define PMD_CACHE_NUM		1
-#define HUGEPTE_CACHE_NUM	2
-#define PTE_NONCACHE_NUM	7  /* from GFP rather than kmem_cache */
+#define PGT_CACHE(shift) (pgtable_cache[(shift)-1])
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL);
+	return kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE), GFP_KERNEL);
 }
 
 static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
-	subpage_prot_free(pgd);
-	kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd);
+	kmem_cache_free(PGT_CACHE(PGD_INDEX_SIZE), pgd);
 }
 
 #ifndef CONFIG_PPC_64K_PAGES
@@ -40,13 +47,13 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 
 static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
 {
-	return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM],
+	return kmem_cache_alloc(PGT_CACHE(PUD_INDEX_SIZE),
 				GFP_KERNEL|__GFP_REPEAT);
 }
 
 static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 {
-	kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud);
+	kmem_cache_free(PGT_CACHE(PUD_INDEX_SIZE), pud);
 }
 
 static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
@@ -78,13 +85,13 @@ static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
 {
-	return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM],
+	return kmem_cache_alloc(PGT_CACHE(PMD_INDEX_SIZE),
 				GFP_KERNEL|__GFP_REPEAT);
 }
 
 static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 {
-	kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd);
+	kmem_cache_free(PGT_CACHE(PMD_INDEX_SIZE), pmd);
 }
 
 static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
@@ -107,24 +114,22 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
 	return page;
 }
 
-static inline void pgtable_free(pgtable_free_t pgf)
+static inline void pgtable_free(void *table, unsigned index_size)
 {
-	void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
-	int cachenum = pgf.val & PGF_CACHENUM_MASK;
-
-	if (cachenum == PTE_NONCACHE_NUM)
-		free_page((unsigned long)p);
-	else
-		kmem_cache_free(pgtable_cache[cachenum], p);
+	if (!index_size)
+		free_page((unsigned long)table);
+	else {
+		BUG_ON(index_size > MAX_PGTABLE_INDEX_SIZE);
+		kmem_cache_free(PGT_CACHE(index_size), table);
+	}
 }
 
-#define __pmd_free_tlb(tlb, pmd,addr)		      \
-	pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
-		PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
+#define __pmd_free_tlb(tlb, pmd, addr)		      \
+	pgtable_free_tlb(tlb, pmd, PMD_INDEX_SIZE)
 #ifndef CONFIG_PPC_64K_PAGES
 #define __pud_free_tlb(tlb, pud, addr)		      \
-	pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
-		PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
+	pgtable_free_tlb(tlb, pud, PUD_INDEX_SIZE)
+
 #endif /* CONFIG_PPC_64K_PAGES */
 
 #define check_pgt_cache()	do { } while (0)
diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index f2e812de7c3c..abe8532bd14e 100644
--- a/arch/powerpc/include/asm/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -24,25 +24,6 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
 	__free_page(ptepage);
 }
 
-typedef struct pgtable_free {
-	unsigned long val;
-} pgtable_free_t;
-
-/* This needs to be big enough to allow for MMU_PAGE_COUNT + 2 to be stored
- * and small enough to fit in the low bits of any naturally aligned page
- * table cache entry. Arbitrarily set to 0x1f, that should give us some
- * room to grow
- */
-#define PGF_CACHENUM_MASK	0x1f
-
-static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
-						unsigned long mask)
-{
-	BUG_ON(cachenum > PGF_CACHENUM_MASK);
-
-	return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
-}
-
 #ifdef CONFIG_PPC64
 #include <asm/pgalloc-64.h>
 #else
@@ -50,12 +31,12 @@ static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
 #endif
 
 #ifdef CONFIG_SMP
-extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
+extern void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift);
 extern void pte_free_finish(void);
 #else /* CONFIG_SMP */
-static inline void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
+static inline void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift)
 {
-	pgtable_free(pgf);
+	pgtable_free(table, shift);
 }
 static inline void pte_free_finish(void) { }
 #endif /* !CONFIG_SMP */
@@ -63,12 +44,9 @@ static inline void pte_free_finish(void) { }
 static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *ptepage,
 				  unsigned long address)
 {
-	pgtable_free_t pgf = pgtable_free_cache(page_address(ptepage),
-						PTE_NONCACHE_NUM,
-						PTE_TABLE_SIZE-1);
 	tlb_flush_pgtable(tlb, address);
 	pgtable_page_dtor(ptepage);
-	pgtable_free_tlb(tlb, pgf);
+	pgtable_free_tlb(tlb, page_address(ptepage), 0);
 }
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 806abe7a3fa5..49865045d56f 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -354,6 +354,7 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
 #define pgoff_to_pte(off)	((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE})
 #define PTE_FILE_MAX_BITS	(BITS_PER_LONG - PTE_RPN_SHIFT)
 
+void pgtable_cache_add(unsigned shift, void (*ctor)(void *));
 void pgtable_cache_init(void);
 
 /*
@@ -378,7 +379,18 @@ void pgtable_cache_init(void);
 	return pt;
 }
 
-pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address);
+#ifdef CONFIG_HUGETLB_PAGE
+pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
+				 unsigned *shift);
+#else
+static inline pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
+					       unsigned *shift)
+{
+	if (shift)
+		*shift = 0;
+	return find_linux_pte(pgdir, ea);
+}
+#endif /* !CONFIG_HUGETLB_PAGE */
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 2a5da069714e..21207e54825b 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -211,6 +211,9 @@ extern void paging_init(void);
  */
 extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
 
+extern int gup_hugepd(hugepd_t *hugepd, unsigned pdshift, unsigned long addr,
+		      unsigned long end, int write, struct page **pages, int *nr);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/pmac_low_i2c.h b/arch/powerpc/include/asm/pmac_low_i2c.h
index 131011bd7e76..01d71826d92f 100644
--- a/arch/powerpc/include/asm/pmac_low_i2c.h
+++ b/arch/powerpc/include/asm/pmac_low_i2c.h
@@ -72,11 +72,7 @@ extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus);
 extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus);
 extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus);
 
-/* i2c layer adapter attach/detach */
-extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
-				    struct i2c_adapter *adapter);
-extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
-				    struct i2c_adapter *adapter);
+/* i2c layer adapter helpers */
 extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus);
 extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter);
 
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 6ff04185d2aa..2ab9cbd98826 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -1,3 +1,4 @@
+#include <linux/of.h>	/* linux/of.h gets to determine #include ordering */
 #ifndef _POWERPC_PROM_H
 #define _POWERPC_PROM_H
 #ifdef __KERNEL__
@@ -16,6 +17,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 #include <linux/types.h>
+#include <linux/of_fdt.h>
 #include <linux/proc_fs.h>
 #include <linux/platform_device.h>
 #include <asm/irq.h>
@@ -28,133 +30,14 @@
 #define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
 #define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
 
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER		0xd00dfeed	/* marker */
-#define OF_DT_BEGIN_NODE	0x1		/* Start of node, full name */
-#define OF_DT_END_NODE		0x2		/* End node */
-#define OF_DT_PROP		0x3		/* Property: name off, size,
-						 * content */
-#define OF_DT_NOP		0x4		/* nop */
-#define OF_DT_END		0x9
-
-#define OF_DT_VERSION		0x10
-
-/*
- * This is what gets passed to the kernel by prom_init or kexec
- *
- * The dt struct contains the device tree structure, full pathes and
- * property contents. The dt strings contain a separate block with just
- * the strings for the property names, and is fully page aligned and
- * self contained in a page, so that it can be kept around by the kernel,
- * each property name appears only once in this page (cheap compression)
- *
- * the mem_rsvmap contains a map of reserved ranges of physical memory,
- * passing it here instead of in the device-tree itself greatly simplifies
- * the job of everybody. It's just a list of u64 pairs (base/size) that
- * ends when size is 0
- */
-struct boot_param_header
-{
-	u32	magic;			/* magic word OF_DT_HEADER */
-	u32	totalsize;		/* total size of DT block */
-	u32	off_dt_struct;		/* offset to structure */
-	u32	off_dt_strings;		/* offset to strings */
-	u32	off_mem_rsvmap;		/* offset to memory reserve map */
-	u32	version;		/* format version */
-	u32	last_comp_version;	/* last compatible version */
-	/* version 2 fields below */
-	u32	boot_cpuid_phys;	/* Physical CPU id we're booting on */
-	/* version 3 fields below */
-	u32	dt_strings_size;	/* size of the DT strings block */
-	/* version 17 fields below */
-	u32	dt_struct_size;		/* size of the DT structure block */
-};
-
-
-
-typedef u32 phandle;
-typedef u32 ihandle;
-
-struct property {
-	char	*name;
-	int	length;
-	void	*value;
-	struct property *next;
-};
-
-struct device_node {
-	const char *name;
-	const char *type;
-	phandle	node;
-	phandle linux_phandle;
-	char	*full_name;
-
-	struct	property *properties;
-	struct  property *deadprops; /* removed properties */
-	struct	device_node *parent;
-	struct	device_node *child;
-	struct	device_node *sibling;
-	struct	device_node *next;	/* next device of same type */
-	struct	device_node *allnext;	/* next in list of all nodes */
-	struct  proc_dir_entry *pde;	/* this node's proc directory */
-	struct  kref kref;
-	unsigned long _flags;
-	void	*data;
-};
-
 extern struct device_node *of_chosen;
 
-static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
-{
-	return test_bit(flag, &n->_flags);
-}
-
-static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
-{
-	set_bit(flag, &n->_flags);
-}
-
-
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
-static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
-{
-	dn->pde = de;
-}
-
-
-extern struct device_node *of_find_all_nodes(struct device_node *prev);
-extern struct device_node *of_node_get(struct device_node *node);
-extern void of_node_put(struct device_node *node);
-
-/* For scanning the flat device-tree at boot time */
-extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
-					    const char *uname, int depth,
-					    void *data),
-				  void *data);
-extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
-					unsigned long *size);
-extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name);
-extern unsigned long __init of_get_flat_dt_root(void);
-
 /* For updating the device tree at runtime */
 extern void of_attach_node(struct device_node *);
 extern void of_detach_node(struct device_node *);
 
-/* Other Prototypes */
-extern void finish_device_tree(void);
-extern void unflatten_device_tree(void);
-extern void early_init_devtree(void *);
-extern int machine_is_compatible(const char *compat);
-extern void print_properties(struct device_node *node);
-extern int prom_n_intr_cells(struct device_node* np);
-extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
-extern int prom_add_property(struct device_node* np, struct property* prop);
-extern int prom_remove_property(struct device_node *np, struct property *prop);
-extern int prom_update_property(struct device_node *np,
-				struct property *newprop,
-				struct property *oldprop);
-
 #ifdef CONFIG_PPC32
 /*
  * PCI <-> OF matching functions
@@ -178,26 +61,6 @@ extern int release_OF_resource(struct device_node* node, int index);
  * OF address retreival & translation
  */
 
-
-/* Helper to read a big number; size is in cells (not bytes) */
-static inline u64 of_read_number(const u32 *cell, int size)
-{
-	u64 r = 0;
-	while (size--)
-		r = (r << 32) | *(cell++);
-	return r;
-}
-
-/* Like of_read_number, but we want an unsigned long result */
-#ifdef CONFIG_PPC32
-static inline unsigned long of_read_ulong(const u32 *cell, int size)
-{
-	return cell[size-1];
-}
-#else
-#define of_read_ulong(cell, size)	of_read_number(cell, size)
-#endif
-
 /* Translate an OF address block into a CPU physical address
  */
 extern u64 of_translate_address(struct device_node *np, const u32 *addr);
@@ -349,11 +212,5 @@ extern int of_irq_to_resource(struct device_node *dev, int index,
  */
 extern void __iomem *of_iomap(struct device_node *device, int index);
 
-/*
- * NB:  This is here while we transition from using asm/prom.h
- * to linux/of.h
- */
-#include <linux/of.h>
-
 #endif /* __KERNEL__ */
 #endif /* _POWERPC_PROM_H */
diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h
index dd5ea95fe61e..d44826e4ff97 100644
--- a/arch/powerpc/include/asm/pte-8xx.h
+++ b/arch/powerpc/include/asm/pte-8xx.h
@@ -33,21 +33,21 @@
 #define _PAGE_NO_CACHE	0x0002	/* I: cache inhibit */
 #define _PAGE_SHARED	0x0004	/* No ASID (context) compare */
 #define _PAGE_SPECIAL	0x0008	/* SW entry, forced to 0 by the TLB miss */
+#define _PAGE_DIRTY	0x0100	/* C: page changed */
 
-/* These five software bits must be masked out when the entry is loaded
- * into the TLB.
+/* These 4 software bits must be masked out when the entry is loaded
+ * into the TLB, 1 SW bit left(0x0080).
  */
 #define _PAGE_GUARDED	0x0010	/* software: guarded access */
-#define _PAGE_DIRTY	0x0020	/* software: page changed */
-#define _PAGE_RW	0x0040	/* software: user write access allowed */
-#define _PAGE_ACCESSED	0x0080	/* software: page referenced */
+#define _PAGE_ACCESSED	0x0020	/* software: page referenced */
+#define _PAGE_WRITETHRU	0x0040	/* software: caching is write through */
 
 /* Setting any bits in the nibble with the follow two controls will
  * require a TLB exception handler change.  It is assumed unused bits
  * are always zero.
  */
-#define _PAGE_HWWRITE	0x0100	/* h/w write enable: never set in Linux PTE */
-#define _PAGE_USER	0x0800	/* One of the PP bits, the other is USER&~RW */
+#define _PAGE_RW	0x0400	/* lsb PP bits, inverted in HW */
+#define _PAGE_USER	0x0800	/* msb PP bits */
 
 #define _PMD_PRESENT	0x0001
 #define _PMD_BAD	0x0ff0
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index 82b72207c51c..c4490f9c67c4 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -76,41 +76,4 @@
 	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE,		\
 			__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
 
-
-#ifdef CONFIG_PPC_SUBPAGE_PROT
-/*
- * For the sub-page protection option, we extend the PGD with one of
- * these.  Basically we have a 3-level tree, with the top level being
- * the protptrs array.  To optimize speed and memory consumption when
- * only addresses < 4GB are being protected, pointers to the first
- * four pages of sub-page protection words are stored in the low_prot
- * array.
- * Each page of sub-page protection words protects 1GB (4 bytes
- * protects 64k).  For the 3-level tree, each page of pointers then
- * protects 8TB.
- */
-struct subpage_prot_table {
-	unsigned long maxaddr;	/* only addresses < this are protected */
-	unsigned int **protptrs[2];
-	unsigned int *low_prot[4];
-};
-
-#undef PGD_TABLE_SIZE
-#define PGD_TABLE_SIZE		((sizeof(pgd_t) << PGD_INDEX_SIZE) + \
-				 sizeof(struct subpage_prot_table))
-
-#define SBP_L1_BITS		(PAGE_SHIFT - 2)
-#define SBP_L2_BITS		(PAGE_SHIFT - 3)
-#define SBP_L1_COUNT		(1 << SBP_L1_BITS)
-#define SBP_L2_COUNT		(1 << SBP_L2_BITS)
-#define SBP_L2_SHIFT		(PAGE_SHIFT + SBP_L1_BITS)
-#define SBP_L3_SHIFT		(SBP_L2_SHIFT + SBP_L2_BITS)
-
-extern void subpage_prot_free(pgd_t *pgd);
-
-static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
-{
-	return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD);
-}
-#endif /* CONFIG_PPC_SUBPAGE_PROT */
 #endif	/* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index f388f0ab193f..0947b36e534c 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -87,7 +87,7 @@ extern spinlock_t cmxgcr_lock;
 
 /* Export QE common operations */
 #ifdef CONFIG_QUICC_ENGINE
-extern void __init qe_reset(void);
+extern void qe_reset(void);
 #else
 static inline void qe_reset(void) {}
 #endif
@@ -145,8 +145,17 @@ static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {}
 static inline void qe_pin_set_dedicated(struct qe_pin *pin) {}
 #endif /* CONFIG_QE_GPIO */
 
-/* QE internal API */
+#ifdef CONFIG_QUICC_ENGINE
 int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+#else
+static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
+			       u32 cmd_input)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+/* QE internal API */
 enum qe_clock qe_clock_source(const char *source);
 unsigned int qe_get_brg_clk(void);
 int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
@@ -154,7 +163,28 @@ int qe_get_snum(void);
 void qe_put_snum(u8 snum);
 unsigned int qe_get_num_of_risc(void);
 unsigned int qe_get_num_of_snums(void);
-int qe_alive_during_sleep(void);
+
+static inline int qe_alive_during_sleep(void)
+{
+	/*
+	 * MPC8568E reference manual says:
+	 *
+	 * "...power down sequence waits for all I/O interfaces to become idle.
+	 *  In some applications this may happen eventually without actively
+	 *  shutting down interfaces, but most likely, software will have to
+	 *  take steps to shut down the eTSEC, QUICC Engine Block, and PCI
+	 *  interfaces before issuing the command (either the write to the core
+	 *  MSR[WE] as described above or writing to POWMGTCSR) to put the
+	 *  device into sleep state."
+	 *
+	 * MPC8569E reference manual has a similar paragraph.
+	 */
+#ifdef CONFIG_PPC_85xx
+	return 0;
+#else
+	return 1;
+#endif
+}
 
 /* we actually use cpm_muram implementation, define this for convenience */
 #define qe_muram_init cpm_muram_init
@@ -210,8 +240,15 @@ struct qe_firmware_info {
 	u64 extended_modes;	/* Extended modes */
 };
 
+#ifdef CONFIG_QUICC_ENGINE
 /* Upload a firmware to the QE */
 int qe_upload_firmware(const struct qe_firmware *firmware);
+#else
+static inline int qe_upload_firmware(const struct qe_firmware *firmware)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
 
 /* Obtain information on the uploaded firmware */
 struct qe_firmware_info *qe_get_firmware_info(void);
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 6315edc205d8..bc8dd53f718a 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -489,6 +489,8 @@
 #define SPRN_MMCR1	798
 #define SPRN_MMCRA	0x312
 #define   MMCRA_SDSYNC	0x80000000UL /* SDAR synced with SIAR */
+#define   MMCRA_SDAR_DCACHE_MISS 0x40000000UL
+#define   MMCRA_SDAR_ERAT_MISS   0x20000000UL
 #define   MMCRA_SIHV	0x10000000UL /* state of MSR HV when SIAR set */
 #define   MMCRA_SIPR	0x08000000UL /* state of MSR PR when SIAR set */
 #define   MMCRA_SLOT	0x07000000UL /* SLOT bits (37-39) */
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 1e180a594589..0de404dfee8b 100644
--- a/arch/powerpc/include/asm/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -39,7 +39,7 @@
 #define PMRN_PMLCB2	0x112	/* PM Local Control B2 */
 #define PMRN_PMLCB3	0x113	/* PM Local Control B3 */
 
-#define PMLCB_THRESHMUL_MASK	0x0700	/* Threshhold Multiple Field */
+#define PMLCB_THRESHMUL_MASK	0x0700	/* Threshold Multiple Field */
 #define PMLCB_THRESHMUL_SHIFT	8
 
 #define PMLCB_THRESHOLD_MASK	0x003f	/* Threshold Field */
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
index 3ab8b3e6feb0..866f7606da68 100644
--- a/arch/powerpc/include/asm/socket.h
+++ b/arch/powerpc/include/asm/socket.h
@@ -67,4 +67,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index c7d671a7d9a1..07d2d19ab5e9 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -145,7 +145,7 @@ SYSCALL_SPU(setfsuid)
 SYSCALL_SPU(setfsgid)
 SYSCALL_SPU(llseek)
 COMPAT_SYS_SPU(getdents)
-SYSX_SPU(sys_select,ppc32_select,ppc_select)
+SYSX_SPU(sys_select,ppc32_select,sys_select)
 SYSCALL_SPU(flock)
 SYSCALL_SPU(msync)
 COMPAT_SYS_SPU(readv)
diff --git a/arch/powerpc/include/asm/trace.h b/arch/powerpc/include/asm/trace.h
new file mode 100644
index 000000000000..cbe2297d68b6
--- /dev/null
+++ b/arch/powerpc/include/asm/trace.h
@@ -0,0 +1,133 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM powerpc
+
+#if !defined(_TRACE_POWERPC_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_POWERPC_H
+
+#include <linux/tracepoint.h>
+
+struct pt_regs;
+
+TRACE_EVENT(irq_entry,
+
+	TP_PROTO(struct pt_regs *regs),
+
+	TP_ARGS(regs),
+
+	TP_STRUCT__entry(
+		__field(struct pt_regs *, regs)
+	),
+
+	TP_fast_assign(
+		__entry->regs = regs;
+	),
+
+	TP_printk("pt_regs=%p", __entry->regs)
+);
+
+TRACE_EVENT(irq_exit,
+
+	TP_PROTO(struct pt_regs *regs),
+
+	TP_ARGS(regs),
+
+	TP_STRUCT__entry(
+		__field(struct pt_regs *, regs)
+	),
+
+	TP_fast_assign(
+		__entry->regs = regs;
+	),
+
+	TP_printk("pt_regs=%p", __entry->regs)
+);
+
+TRACE_EVENT(timer_interrupt_entry,
+
+	TP_PROTO(struct pt_regs *regs),
+
+	TP_ARGS(regs),
+
+	TP_STRUCT__entry(
+		__field(struct pt_regs *, regs)
+	),
+
+	TP_fast_assign(
+		__entry->regs = regs;
+	),
+
+	TP_printk("pt_regs=%p", __entry->regs)
+);
+
+TRACE_EVENT(timer_interrupt_exit,
+
+	TP_PROTO(struct pt_regs *regs),
+
+	TP_ARGS(regs),
+
+	TP_STRUCT__entry(
+		__field(struct pt_regs *, regs)
+	),
+
+	TP_fast_assign(
+		__entry->regs = regs;
+	),
+
+	TP_printk("pt_regs=%p", __entry->regs)
+);
+
+#ifdef CONFIG_PPC_PSERIES
+extern void hcall_tracepoint_regfunc(void);
+extern void hcall_tracepoint_unregfunc(void);
+
+TRACE_EVENT_FN(hcall_entry,
+
+	TP_PROTO(unsigned long opcode, unsigned long *args),
+
+	TP_ARGS(opcode, args),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, opcode)
+	),
+
+	TP_fast_assign(
+		__entry->opcode = opcode;
+	),
+
+	TP_printk("opcode=%lu", __entry->opcode),
+
+	hcall_tracepoint_regfunc, hcall_tracepoint_unregfunc
+);
+
+TRACE_EVENT_FN(hcall_exit,
+
+	TP_PROTO(unsigned long opcode, unsigned long retval,
+		unsigned long *retbuf),
+
+	TP_ARGS(opcode, retval, retbuf),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, opcode)
+		__field(unsigned long, retval)
+	),
+
+	TP_fast_assign(
+		__entry->opcode = opcode;
+		__entry->retval = retval;
+	),
+
+	TP_printk("opcode=%lu retval=%lu", __entry->opcode, __entry->retval),
+
+	hcall_tracepoint_regfunc, hcall_tracepoint_unregfunc
+);
+#endif
+
+#endif /* _TRACE_POWERPC_H */
+
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH asm
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index b23664a0b86c..c002b0410219 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -42,10 +42,11 @@ obj-$(CONFIG_ALTIVEC)		+= vecemu.o
 obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
 obj-$(CONFIG_PPC_OF)		+= of_device.o of_platform.o prom_parse.o
 obj-$(CONFIG_PPC_CLOCK)		+= clock.o
-procfs-$(CONFIG_PPC64)		:= proc_ppc64.o
+procfs-y			:= proc_powerpc.o
 obj-$(CONFIG_PROC_FS)		+= $(procfs-y)
 rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI)	:= rtas_pci.o
 obj-$(CONFIG_PPC_RTAS)		+= rtas.o rtas-rtc.o $(rtaspci-y-y)
+obj-$(CONFIG_PPC_RTAS_DAEMON)	+= rtasd.o
 obj-$(CONFIG_RTAS_FLASH)	+= rtas_flash.o
 obj-$(CONFIG_RTAS_PROC)		+= rtas-proc.o
 obj-$(CONFIG_LPARCFG)		+= lparcfg.o
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index a5b632e52fae..3839839f83c7 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -732,7 +732,7 @@ int fix_alignment(struct pt_regs *regs)
 
 #ifdef CONFIG_SPE
 	if ((instr >> 26) == 0x4) {
-		PPC_WARN_EMULATED(spe);
+		PPC_WARN_ALIGNMENT(spe, regs);
 		return emulate_spe(regs, reg, instr);
 	}
 #endif
@@ -786,7 +786,7 @@ int fix_alignment(struct pt_regs *regs)
 			flags |= SPLT;
 			nb = 8;
 		}
-		PPC_WARN_EMULATED(vsx);
+		PPC_WARN_ALIGNMENT(vsx, regs);
 		return emulate_vsx(addr, reg, areg, regs, flags, nb);
 	}
 #endif
@@ -794,7 +794,7 @@ int fix_alignment(struct pt_regs *regs)
 	 * the exception of DCBZ which is handled as a special case here
 	 */
 	if (instr == DCBZ) {
-		PPC_WARN_EMULATED(dcbz);
+		PPC_WARN_ALIGNMENT(dcbz, regs);
 		return emulate_dcbz(regs, addr);
 	}
 	if (unlikely(nb == 0))
@@ -804,7 +804,7 @@ int fix_alignment(struct pt_regs *regs)
 	 * function
 	 */
 	if (flags & M) {
-		PPC_WARN_EMULATED(multiple);
+		PPC_WARN_ALIGNMENT(multiple, regs);
 		return emulate_multiple(regs, addr, reg, nb,
 					flags, instr, swiz);
 	}
@@ -825,11 +825,11 @@ int fix_alignment(struct pt_regs *regs)
 
 	/* Special case for 16-byte FP loads and stores */
 	if (nb == 16) {
-		PPC_WARN_EMULATED(fp_pair);
+		PPC_WARN_ALIGNMENT(fp_pair, regs);
 		return emulate_fp_pair(addr, reg, flags);
 	}
 
-	PPC_WARN_EMULATED(unaligned);
+	PPC_WARN_ALIGNMENT(unaligned, regs);
 
 	/* If we are loading, get the data from user space, else
 	 * get it from register values
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 0812b0f414bb..a6c2b63227b3 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -190,6 +190,11 @@ int main(void)
 	DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
 	DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
 	DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+	DEFINE(PACA_KVM_IN_GUEST, offsetof(struct paca_struct, kvm_in_guest));
+	DEFINE(PACA_KVM_SLB, offsetof(struct paca_struct, kvm_slb));
+	DEFINE(PACA_KVM_SLB_MAX, offsetof(struct paca_struct, kvm_slb_max));
+#endif
 #endif /* CONFIG_PPC64 */
 
 	/* RTAS */
@@ -398,14 +403,24 @@ int main(void)
 	DEFINE(VCPU_LAST_INST, offsetof(struct kvm_vcpu, arch.last_inst));
 	DEFINE(VCPU_FAULT_DEAR, offsetof(struct kvm_vcpu, arch.fault_dear));
 	DEFINE(VCPU_FAULT_ESR, offsetof(struct kvm_vcpu, arch.fault_esr));
+
+	/* book3s_64 */
+#ifdef CONFIG_PPC64
+	DEFINE(VCPU_FAULT_DSISR, offsetof(struct kvm_vcpu, arch.fault_dsisr));
+	DEFINE(VCPU_HOST_RETIP, offsetof(struct kvm_vcpu, arch.host_retip));
+	DEFINE(VCPU_HOST_R2, offsetof(struct kvm_vcpu, arch.host_r2));
+	DEFINE(VCPU_HOST_MSR, offsetof(struct kvm_vcpu, arch.host_msr));
+	DEFINE(VCPU_SHADOW_MSR, offsetof(struct kvm_vcpu, arch.shadow_msr));
+	DEFINE(VCPU_TRAMPOLINE_LOWMEM, offsetof(struct kvm_vcpu, arch.trampoline_lowmem));
+	DEFINE(VCPU_TRAMPOLINE_ENTER, offsetof(struct kvm_vcpu, arch.trampoline_enter));
+	DEFINE(VCPU_HIGHMEM_HANDLER, offsetof(struct kvm_vcpu, arch.highmem_handler));
+	DEFINE(VCPU_HFLAGS, offsetof(struct kvm_vcpu, arch.hflags));
+#endif
 #endif
 #ifdef CONFIG_44x
 	DEFINE(PGD_T_LOG2, PGD_T_LOG2);
 	DEFINE(PTE_T_LOG2, PTE_T_LOG2);
 #endif
-#ifdef CONFIG_FSL_BOOKE
-	DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam));
-#endif
 
 #ifdef CONFIG_KVM_EXIT_TIMING
 	DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu,
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 0a8439aafdd1..6f4613dd05ef 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -373,7 +373,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
 	hard_irq_disable();
 
 	for_each_irq(i) {
-		struct irq_desc *desc = irq_desc + i;
+		struct irq_desc *desc = irq_to_desc(i);
 
 		if (desc->status & IRQ_INPROGRESS)
 			desc->chip->eoi(i);
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index e96cbbd9b449..59c928564a03 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -21,7 +21,6 @@
 #include <asm/dma.h>
 #include <asm/abs_addr.h>
 
-int swiotlb __read_mostly;
 unsigned int ppc_swiotlb_enable;
 
 /*
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 9763267e38b4..bdcb557d470a 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -551,7 +551,7 @@ restore:
 BEGIN_FW_FTR_SECTION
 	ld	r5,SOFTE(r1)
 FW_FTR_SECTION_ELSE
-	b	iseries_check_pending_irqs
+	b	.Liseries_check_pending_irqs
 ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 2:
 	TRACE_AND_RESTORE_IRQ(r5);
@@ -623,7 +623,7 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 
 #endif /* CONFIG_PPC_BOOK3E */
 
-iseries_check_pending_irqs:
+.Liseries_check_pending_irqs:
 #ifdef CONFIG_PPC_ISERIES
 	ld	r5,SOFTE(r1)
 	cmpdi	0,r5,0
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 1808876edcc9..e3be98ffe2a7 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -41,6 +41,7 @@ __start_interrupts:
 	. = 0x200
 _machine_check_pSeries:
 	HMT_MEDIUM
+	DO_KVM	0x200
 	mtspr	SPRN_SPRG_SCRATCH0,r13		/* save r13 */
 	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
 
@@ -48,6 +49,7 @@ _machine_check_pSeries:
 	.globl data_access_pSeries
 data_access_pSeries:
 	HMT_MEDIUM
+	DO_KVM	0x300
 	mtspr	SPRN_SPRG_SCRATCH0,r13
 BEGIN_FTR_SECTION
 	mfspr	r13,SPRN_SPRG_PACA
@@ -77,6 +79,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB)
 	.globl data_access_slb_pSeries
 data_access_slb_pSeries:
 	HMT_MEDIUM
+	DO_KVM	0x380
 	mtspr	SPRN_SPRG_SCRATCH0,r13
 	mfspr	r13,SPRN_SPRG_PACA		/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
@@ -115,6 +118,7 @@ data_access_slb_pSeries:
 	.globl instruction_access_slb_pSeries
 instruction_access_slb_pSeries:
 	HMT_MEDIUM
+	DO_KVM	0x480
 	mtspr	SPRN_SPRG_SCRATCH0,r13
 	mfspr	r13,SPRN_SPRG_PACA		/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
@@ -154,6 +158,7 @@ instruction_access_slb_pSeries:
 	.globl	system_call_pSeries
 system_call_pSeries:
 	HMT_MEDIUM
+	DO_KVM	0xc00
 BEGIN_FTR_SECTION
 	cmpdi	r0,0x1ebe
 	beq-	1f
@@ -185,13 +190,19 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	 * prolog code of the PerformanceMonitor one. A little
 	 * trickery is thus necessary
 	 */
+performance_monitor_pSeries_1:
 	. = 0xf00
+	DO_KVM	0xf00
 	b	performance_monitor_pSeries
 
+altivec_unavailable_pSeries_1:
 	. = 0xf20
+	DO_KVM	0xf20
 	b	altivec_unavailable_pSeries
 
+vsx_unavailable_pSeries_1:
 	. = 0xf40
+	DO_KVM	0xf40
 	b	vsx_unavailable_pSeries
 
 #ifdef CONFIG_CBE_RAS
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index c38afdb45d7b..925807488022 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -37,6 +37,7 @@
 #include <asm/firmware.h>
 #include <asm/page_64.h>
 #include <asm/irqflags.h>
+#include <asm/kvm_book3s_64_asm.h>
 
 /* The physical memory is layed out such that the secondary processor
  * spin code sits at 0x0000...0x00ff. On server, the vectors follow
@@ -165,6 +166,12 @@ exception_marker:
 #include "exceptions-64s.S"
 #endif
 
+/* KVM trampoline code needs to be close to the interrupt handlers */
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+#include "../kvm/book3s_64_rmhandlers.S"
+#endif
+
 _GLOBAL(generic_secondary_thread_init)
 	mr	r24,r3
 
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 6ded19d01891..678f98cd5e64 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -206,6 +206,8 @@ MachineCheck:
 	EXCEPTION_PROLOG
 	mfspr r4,SPRN_DAR
 	stw r4,_DAR(r11)
+	li r5,0x00f0
+	mtspr SPRN_DAR,r5	/* Tag DAR, to be used in DTLB Error */
 	mfspr r5,SPRN_DSISR
 	stw r5,_DSISR(r11)
 	addi r3,r1,STACK_FRAME_OVERHEAD
@@ -222,6 +224,8 @@ DataAccess:
 	stw	r10,_DSISR(r11)
 	mr	r5,r10
 	mfspr	r4,SPRN_DAR
+	li	r10,0x00f0
+	mtspr	SPRN_DAR,r10	/* Tag DAR, to be used in DTLB Error */
 	EXC_XFER_EE_LITE(0x300, handle_page_fault)
 
 /* Instruction access exception.
@@ -244,6 +248,8 @@ Alignment:
 	EXCEPTION_PROLOG
 	mfspr	r4,SPRN_DAR
 	stw	r4,_DAR(r11)
+	li	r5,0x00f0
+	mtspr	SPRN_DAR,r5	/* Tag DAR, to be used in DTLB Error */
 	mfspr	r5,SPRN_DSISR
 	stw	r5,_DSISR(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
@@ -333,26 +339,20 @@ InstructionTLBMiss:
 	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
 	lwz	r10, 0(r11)	/* Get the pte */
 
-#ifdef CONFIG_SWAP
-	/* do not set the _PAGE_ACCESSED bit of a non-present page */
-	andi.	r11, r10, _PAGE_PRESENT
-	beq	4f
-	ori	r10, r10, _PAGE_ACCESSED
-	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
-	stw	r10, 0(r11)
-4:
-#else
-	ori	r10, r10, _PAGE_ACCESSED
-	stw	r10, 0(r11)
-#endif
+	andi.	r11, r10, _PAGE_ACCESSED | _PAGE_PRESENT
+	cmpwi	cr0, r11, _PAGE_ACCESSED | _PAGE_PRESENT
+	bne-	cr0, 2f
+
+	/* Clear PP lsb, 0x400 */
+	rlwinm 	r10, r10, 0, 22, 20
 
 	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
+	 * Software indicator bits 22 and 28 must be clear.
 	 * Software indicator bits 24, 25, 26, and 27 must be
 	 * set.  All other Linux PTE bits control the behavior
 	 * of the MMU.
 	 */
-2:	li	r11, 0x00f0
+	li	r11, 0x00f0
 	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
 	DO_8xx_CPU6(0x2d80, r3)
 	mtspr	SPRN_MI_RPN, r10	/* Update TLB entry */
@@ -365,6 +365,22 @@ InstructionTLBMiss:
 	lwz	r3, 8(r0)
 #endif
 	rfi
+2:
+	mfspr	r11, SPRN_SRR1
+	/* clear all error bits as TLB Miss
+	 * sets a few unconditionally
+	*/
+	rlwinm	r11, r11, 0, 0xffff
+	mtspr	SPRN_SRR1, r11
+
+	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	lwz	r11, 0(r0)
+	mtcr	r11
+	lwz	r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)
+#endif
+	b	InstructionAccess
 
 	. = 0x1200
 DataStoreTLBMiss:
@@ -406,29 +422,45 @@ DataStoreTLBMiss:
 	 * above.
 	 */
 	rlwimi	r11, r10, 0, 27, 27
+	/* Insert the WriteThru flag into the TWC from the Linux PTE.
+	 * It is bit 25 in the Linux PTE and bit 30 in the TWC
+	 */
+	rlwimi	r11, r10, 32-5, 30, 30
 	DO_8xx_CPU6(0x3b80, r3)
 	mtspr	SPRN_MD_TWC, r11
 
-#ifdef CONFIG_SWAP
-	/* do not set the _PAGE_ACCESSED bit of a non-present page */
-	andi.	r11, r10, _PAGE_PRESENT
-	beq	4f
-	ori	r10, r10, _PAGE_ACCESSED
-4:
-	/* and update pte in table */
-#else
-	ori	r10, r10, _PAGE_ACCESSED
-#endif
-	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
-	stw	r10, 0(r11)
+	/* Both _PAGE_ACCESSED and _PAGE_PRESENT has to be set.
+	 * We also need to know if the insn is a load/store, so:
+	 * Clear _PAGE_PRESENT and load that which will
+	 * trap into DTLB Error with store bit set accordinly.
+	 */
+	/* PRESENT=0x1, ACCESSED=0x20
+	 * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5));
+	 * r10 = (r10 & ~PRESENT) | r11;
+	 */
+	rlwinm	r11, r10, 32-5, _PAGE_PRESENT
+	and	r11, r11, r10
+	rlwimi	r10, r11, 0, _PAGE_PRESENT
+
+	/* Honour kernel RO, User NA */
+	/* 0x200 == Extended encoding, bit 22 */
+	/* r11 =  (r10 & _PAGE_USER) >> 2 */
+	rlwinm	r11, r10, 32-2, 0x200
+	or	r10, r11, r10
+	/* r11 =  (r10 & _PAGE_RW) >> 1 */
+	rlwinm	r11, r10, 32-1, 0x200
+	or	r10, r11, r10
+	/* invert RW and 0x200 bits */
+	xori	r10, r10, _PAGE_RW | 0x200
 
 	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
+	 * Software indicator bits 22 and 28 must be clear.
 	 * Software indicator bits 24, 25, 26, and 27 must be
 	 * set.  All other Linux PTE bits control the behavior
 	 * of the MMU.
 	 */
 2:	li	r11, 0x00f0
+	mtspr	SPRN_DAR,r11	/* Tag DAR */
 	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
 	DO_8xx_CPU6(0x3d80, r3)
 	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
@@ -469,97 +501,10 @@ DataTLBError:
 	stw	r10, 0(r0)
 	stw	r11, 4(r0)
 
-	/* First, make sure this was a store operation.
-	*/
-	mfspr	r10, SPRN_DSISR
-	andis.	r11, r10, 0x0200	/* If set, indicates store op */
-	beq	2f
-
-	/* The EA of a data TLB miss is automatically stored in the MD_EPN
-	 * register.  The EA of a data TLB error is automatically stored in
-	 * the DAR, but not the MD_EPN register.  We must copy the 20 most
-	 * significant bits of the EA from the DAR to MD_EPN before we
-	 * start walking the page tables.  We also need to copy the CASID
-	 * value from the M_CASID register.
-	 * Addendum:  The EA of a data TLB error is _supposed_ to be stored
-	 * in DAR, but it seems that this doesn't happen in some cases, such
-	 * as when the error is due to a dcbi instruction to a page with a
-	 * TLB that doesn't have the changed bit set.  In such cases, there
-	 * does not appear to be any way  to recover the EA of the error
-	 * since it is neither in DAR nor MD_EPN.  As a workaround, the
-	 * _PAGE_HWWRITE bit is set for all kernel data pages when the PTEs
-	 * are initialized in mapin_ram().  This will avoid the problem,
-	 * assuming we only use the dcbi instruction on kernel addresses.
-	 */
 	mfspr	r10, SPRN_DAR
-	rlwinm	r11, r10, 0, 0, 19
-	ori	r11, r11, MD_EVALID
-	mfspr	r10, SPRN_M_CASID
-	rlwimi	r11, r10, 0, 28, 31
-	DO_8xx_CPU6(0x3780, r3)
-	mtspr	SPRN_MD_EPN, r11
-
-	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	andi.	r11, r10, 0x0800
-	beq	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	rlwimi	r10, r11, 0, 2, 19
-3:
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, bail */
-
-	/* We have a pte table, so fetch the pte from the table.
-	 */
-	ori	r11, r11, 1		/* Set valid bit in physical L2 page */
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11		/* Load pte table base address */
-	mfspr	r11, SPRN_MD_TWC		/* ....and get the pte address */
-	lwz	r10, 0(r11)		/* Get the pte */
-
-	andi.	r11, r10, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail out if not */
-
-	/* Update 'changed', among others.
-	*/
-#ifdef CONFIG_SWAP
-	ori	r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
-	/* do not set the _PAGE_ACCESSED bit of a non-present page */
-	andi.	r11, r10, _PAGE_PRESENT
-	beq	4f
-	ori	r10, r10, _PAGE_ACCESSED
-4:
-#else
-	ori	r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-#endif
-	mfspr	r11, SPRN_MD_TWC		/* Get pte address again */
-	stw	r10, 0(r11)		/* and update pte in table */
-
-	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
-	 * Software indicator bits 24, 25, 26, and 27 must be
-	 * set.  All other Linux PTE bits control the behavior
-	 * of the MMU.
-	 */
-	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	DO_8xx_CPU6(0x3d80, r3)
-	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
-
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
-	lwz	r3, 8(r0)
-#endif
-	rfi
-2:
+	cmpwi	cr0, r10, 0x00f0
+	beq-	FixupDAR	/* must be a buggy dcbX, icbi insn. */
+DARFixed:/* Return from dcbx instruction bug workaround, r10 holds value of DAR */
 	mfspr	r10, SPRN_M_TW	/* Restore registers */
 	lwz	r11, 0(r0)
 	mtcr	r11
@@ -588,6 +533,140 @@ DataTLBError:
 
 	. = 0x2000
 
+/* This is the procedure to calculate the data EA for buggy dcbx,dcbi instructions
+ * by decoding the registers used by the dcbx instruction and adding them.
+ * DAR is set to the calculated address and r10 also holds the EA on exit.
+ */
+ /* define if you don't want to use self modifying code */
+#define NO_SELF_MODIFYING_CODE
+FixupDAR:/* Entry point for dcbx workaround. */
+	/* fetch instruction from memory. */
+	mfspr	r10, SPRN_SRR0
+	DO_8xx_CPU6(0x3780, r3)
+	mtspr	SPRN_MD_EPN, r10
+	mfspr	r11, SPRN_M_TWB	/* Get level 1 table entry address */
+	cmplwi	cr0, r11, 0x0800
+	blt-	3f		/* Branch if user space */
+	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@h
+	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
+	rlwimi	r11, r10, 32-20, 0xffc /* r11 = r11&~0xffc|(r10>>20)&0xffc */
+3:	lwz	r11, 0(r11)	/* Get the level 1 entry */
+	DO_8xx_CPU6(0x3b80, r3)
+	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
+	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
+	lwz	r11, 0(r11)	/* Get the pte */
+	/* concat physical page address(r11) and page offset(r10) */
+	rlwimi	r11, r10, 0, 20, 31
+	lwz	r11,0(r11)
+/* Check if it really is a dcbx instruction. */
+/* dcbt and dcbtst does not generate DTLB Misses/Errors,
+ * no need to include them here */
+	srwi	r10, r11, 26	/* check if major OP code is 31 */
+	cmpwi	cr0, r10, 31
+	bne-	141f
+	rlwinm	r10, r11, 0, 21, 30
+	cmpwi	cr0, r10, 2028	/* Is dcbz? */
+	beq+	142f
+	cmpwi	cr0, r10, 940	/* Is dcbi? */
+	beq+	142f
+	cmpwi	cr0, r10, 108	/* Is dcbst? */
+	beq+	144f		/* Fix up store bit! */
+	cmpwi	cr0, r10, 172	/* Is dcbf? */
+	beq+	142f
+	cmpwi	cr0, r10, 1964	/* Is icbi? */
+	beq+	142f
+141:	mfspr	r10, SPRN_DAR	/* r10 must hold DAR at exit */
+	b	DARFixed	/* Nope, go back to normal TLB processing */
+
+144:	mfspr	r10, SPRN_DSISR
+	rlwinm	r10, r10,0,7,5	/* Clear store bit for buggy dcbst insn */
+	mtspr	SPRN_DSISR, r10
+142:	/* continue, it was a dcbx, dcbi instruction. */
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)	/* restore r3 from memory */
+#endif
+#ifndef NO_SELF_MODIFYING_CODE
+	andis.	r10,r11,0x1f	/* test if reg RA is r0 */
+	li	r10,modified_instr@l
+	dcbtst	r0,r10		/* touch for store */
+	rlwinm	r11,r11,0,0,20	/* Zero lower 10 bits */
+	oris	r11,r11,640	/* Transform instr. to a "add r10,RA,RB" */
+	ori	r11,r11,532
+	stw	r11,0(r10)	/* store add/and instruction */
+	dcbf	0,r10		/* flush new instr. to memory. */
+	icbi	0,r10		/* invalidate instr. cache line */
+	lwz	r11, 4(r0)	/* restore r11 from memory */
+	mfspr	r10, SPRN_M_TW	/* restore r10 from M_TW */
+	isync			/* Wait until new instr is loaded from memory */
+modified_instr:
+	.space	4		/* this is where the add instr. is stored */
+	bne+	143f
+	subf	r10,r0,r10	/* r10=r10-r0, only if reg RA is r0 */
+143:	mtdar	r10		/* store faulting EA in DAR */
+	b	DARFixed	/* Go back to normal TLB handling */
+#else
+	mfctr	r10
+	mtdar	r10			/* save ctr reg in DAR */
+	rlwinm	r10, r11, 24, 24, 28	/* offset into jump table for reg RB */
+	addi	r10, r10, 150f@l	/* add start of table */
+	mtctr	r10			/* load ctr with jump address */
+	xor	r10, r10, r10		/* sum starts at zero */
+	bctr				/* jump into table */
+150:
+	add	r10, r10, r0	;b	151f
+	add	r10, r10, r1	;b	151f
+	add	r10, r10, r2	;b	151f
+	add	r10, r10, r3	;b	151f
+	add	r10, r10, r4	;b	151f
+	add	r10, r10, r5	;b	151f
+	add	r10, r10, r6	;b	151f
+	add	r10, r10, r7	;b	151f
+	add	r10, r10, r8	;b	151f
+	add	r10, r10, r9	;b	151f
+	mtctr	r11	;b	154f	/* r10 needs special handling */
+	mtctr	r11	;b	153f	/* r11 needs special handling */
+	add	r10, r10, r12	;b	151f
+	add	r10, r10, r13	;b	151f
+	add	r10, r10, r14	;b	151f
+	add	r10, r10, r15	;b	151f
+	add	r10, r10, r16	;b	151f
+	add	r10, r10, r17	;b	151f
+	add	r10, r10, r18	;b	151f
+	add	r10, r10, r19	;b	151f
+	add	r10, r10, r20	;b	151f
+	add	r10, r10, r21	;b	151f
+	add	r10, r10, r22	;b	151f
+	add	r10, r10, r23	;b	151f
+	add	r10, r10, r24	;b	151f
+	add	r10, r10, r25	;b	151f
+	add	r10, r10, r26	;b	151f
+	add	r10, r10, r27	;b	151f
+	add	r10, r10, r28	;b	151f
+	add	r10, r10, r29	;b	151f
+	add	r10, r10, r30	;b	151f
+	add	r10, r10, r31
+151:
+	rlwinm. r11,r11,19,24,28	/* offset into jump table for reg RA */
+	beq	152f			/* if reg RA is zero, don't add it */
+	addi	r11, r11, 150b@l	/* add start of table */
+	mtctr	r11			/* load ctr with jump address */
+	rlwinm	r11,r11,0,16,10		/* make sure we don't execute this more than once */
+	bctr				/* jump into table */
+152:
+	mfdar	r11
+	mtctr	r11			/* restore ctr reg from DAR */
+	mtdar	r10			/* save fault EA to DAR */
+	b	DARFixed		/* Go back to normal TLB handling */
+
+	/* special handling for r10,r11 since these are modified already */
+153:	lwz	r11, 4(r0)	/* load r11 from memory */
+	b	155f
+154:	mfspr	r11, SPRN_M_TW	/* load r10 from M_TW */
+155:	add	r10, r10, r11	/* add it */
+	mfctr	r11		/* restore r11 */
+	b	151b
+#endif
+
 	.globl	giveup_fpu
 giveup_fpu:
 	blr
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 975788ca05d2..7f4bd7f3b6af 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -944,28 +944,6 @@ _GLOBAL(__setup_e500mc_ivors)
 	blr
 
 /*
- * extern void loadcam_entry(unsigned int index)
- *
- * Load TLBCAM[index] entry in to the L2 CAM MMU
- */
-_GLOBAL(loadcam_entry)
-	lis	r4,TLBCAM@ha
-	addi	r4,r4,TLBCAM@l
-	mulli	r5,r3,TLBCAM_SIZE
-	add	r3,r5,r4
-	lwz	r4,0(r3)
-	mtspr	SPRN_MAS0,r4
-	lwz	r4,4(r3)
-	mtspr	SPRN_MAS1,r4
-	lwz	r4,8(r3)
-	mtspr	SPRN_MAS2,r4
-	lwz	r4,12(r3)
-	mtspr	SPRN_MAS3,r4
-	tlbwe
-	isync
-	blr
-
-/*
  * extern void giveup_altivec(struct task_struct *prev)
  *
  * The e500 core does not have an AltiVec unit.
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index 88d9c1d5e5fb..049dda60e475 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -110,18 +110,16 @@ int powersave_nap;
  */
 static ctl_table powersave_nap_ctl_table[]={
 	{
-		.ctl_name	= KERN_PPC_POWERSAVE_NAP,
 		.procname	= "powersave-nap",
 		.data		= &powersave_nap,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{}
 };
 static ctl_table powersave_nap_sysctl_root[] = {
 	{
-		.ctl_name	= CTL_KERN,
 		.procname	= "kernel",
 		.mode		= 0555,
 		.child		= powersave_nap_ctl_table,
diff --git a/arch/powerpc/kernel/io.c b/arch/powerpc/kernel/io.c
index 1882bf419fa6..8dc7547c2377 100644
--- a/arch/powerpc/kernel/io.c
+++ b/arch/powerpc/kernel/io.c
@@ -161,7 +161,7 @@ void _memcpy_fromio(void *dest, const volatile void __iomem *src,
 		dest++;
 		n--;
 	}
-	while(n > 4) {
+	while(n >= 4) {
 		*((u32 *)dest) = *((volatile u32 *)vsrc);
 		eieio();
 		vsrc += 4;
@@ -190,7 +190,7 @@ void _memcpy_toio(volatile void __iomem *dest, const void *src, unsigned long n)
 		vdest++;
 		n--;
 	}
-	while(n > 4) {
+	while(n >= 4) {
 		*((volatile u32 *)vdest) = *((volatile u32 *)src);
 		src += 4;
 		vdest += 4;
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index e5d121177984..f6dca4f4b295 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -70,6 +70,8 @@
 #include <asm/firmware.h>
 #include <asm/lv1call.h>
 #endif
+#define CREATE_TRACE_POINTS
+#include <asm/trace.h>
 
 int __irq_offset_value;
 static int ppc_spurious_interrupts;
@@ -85,7 +87,10 @@ extern int tau_interrupts(int);
 #endif /* CONFIG_PPC32 */
 
 #ifdef CONFIG_PPC64
+
+#ifndef CONFIG_SPARSE_IRQ
 EXPORT_SYMBOL(irq_desc);
+#endif
 
 int distribute_irqs = 1;
 
@@ -187,33 +192,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		for_each_online_cpu(j)
 			seq_printf(p, "CPU%d       ", j);
 		seq_putc(p, '\n');
-	}
-
-	if (i < NR_IRQS) {
-		desc = get_irq_desc(i);
-		spin_lock_irqsave(&desc->lock, flags);
-		action = desc->action;
-		if (!action || !action->handler)
-			goto skip;
-		seq_printf(p, "%3d: ", i);
-#ifdef CONFIG_SMP
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
-#else
-		seq_printf(p, "%10u ", kstat_irqs(i));
-#endif /* CONFIG_SMP */
-		if (desc->chip)
-			seq_printf(p, " %s ", desc->chip->typename);
-		else
-			seq_puts(p, "  None      ");
-		seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge  ");
-		seq_printf(p, "    %s", action->name);
-		for (action = action->next; action; action = action->next)
-			seq_printf(p, ", %s", action->name);
-		seq_putc(p, '\n');
-skip:
-		spin_unlock_irqrestore(&desc->lock, flags);
-	} else if (i == NR_IRQS) {
+	} else if (i == nr_irqs) {
 #if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
 		if (tau_initialized){
 			seq_puts(p, "TAU: ");
@@ -223,30 +202,68 @@ skip:
 		}
 #endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/
 		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
+
+		return 0;
 	}
+
+	desc = irq_to_desc(i);
+	if (!desc)
+		return 0;
+
+	spin_lock_irqsave(&desc->lock, flags);
+
+	action = desc->action;
+	if (!action || !action->handler)
+		goto skip;
+
+	seq_printf(p, "%3d: ", i);
+#ifdef CONFIG_SMP
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
+#else
+	seq_printf(p, "%10u ", kstat_irqs(i));
+#endif /* CONFIG_SMP */
+
+	if (desc->chip)
+		seq_printf(p, " %s ", desc->chip->name);
+	else
+		seq_puts(p, "  None      ");
+
+	seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge  ");
+	seq_printf(p, "    %s", action->name);
+
+	for (action = action->next; action; action = action->next)
+		seq_printf(p, ", %s", action->name);
+	seq_putc(p, '\n');
+
+skip:
+	spin_unlock_irqrestore(&desc->lock, flags);
+
 	return 0;
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
 void fixup_irqs(cpumask_t map)
 {
+	struct irq_desc *desc;
 	unsigned int irq;
 	static int warned;
 
 	for_each_irq(irq) {
 		cpumask_t mask;
 
-		if (irq_desc[irq].status & IRQ_PER_CPU)
+		desc = irq_to_desc(irq);
+		if (desc && desc->status & IRQ_PER_CPU)
 			continue;
 
-		cpumask_and(&mask, irq_desc[irq].affinity, &map);
+		cpumask_and(&mask, desc->affinity, &map);
 		if (any_online_cpu(mask) == NR_CPUS) {
 			printk("Breaking affinity for irq %i\n", irq);
 			mask = map;
 		}
-		if (irq_desc[irq].chip->set_affinity)
-			irq_desc[irq].chip->set_affinity(irq, &mask);
-		else if (irq_desc[irq].action && !(warned++))
+		if (desc->chip->set_affinity)
+			desc->chip->set_affinity(irq, &mask);
+		else if (desc->action && !(warned++))
 			printk("Cannot set affinity for irq %i\n", irq);
 	}
 
@@ -273,7 +290,7 @@ static inline void handle_one_irq(unsigned int irq)
 		return;
 	}
 
-	desc = irq_desc + irq;
+	desc = irq_to_desc(irq);
 	saved_sp_limit = current->thread.ksp_limit;
 
 	irqtp->task = curtp->task;
@@ -325,6 +342,8 @@ void do_IRQ(struct pt_regs *regs)
 	struct pt_regs *old_regs = set_irq_regs(regs);
 	unsigned int irq;
 
+	trace_irq_entry(regs);
+
 	irq_enter();
 
 	check_stack_overflow();
@@ -348,6 +367,8 @@ void do_IRQ(struct pt_regs *regs)
 		timer_interrupt(regs);
 	}
 #endif
+
+	trace_irq_exit(regs);
 }
 
 void __init init_IRQ(void)
@@ -535,7 +556,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 			smp_wmb();
 
 			/* Clear norequest flags */
-			get_irq_desc(i)->status &= ~IRQ_NOREQUEST;
+			irq_to_desc(i)->status &= ~IRQ_NOREQUEST;
 
 			/* Legacy flags are left to default at this point,
 			 * one can then use irq_create_mapping() to
@@ -601,8 +622,16 @@ void irq_set_virq_count(unsigned int count)
 static int irq_setup_virq(struct irq_host *host, unsigned int virq,
 			    irq_hw_number_t hwirq)
 {
+	struct irq_desc *desc;
+
+	desc = irq_to_desc_alloc_node(virq, 0);
+	if (!desc) {
+		pr_debug("irq: -> allocating desc failed\n");
+		goto error;
+	}
+
 	/* Clear IRQ_NOREQUEST flag */
-	get_irq_desc(virq)->status &= ~IRQ_NOREQUEST;
+	desc->status &= ~IRQ_NOREQUEST;
 
 	/* map it */
 	smp_wmb();
@@ -611,11 +640,14 @@ static int irq_setup_virq(struct irq_host *host, unsigned int virq,
 
 	if (host->ops->map(host, virq, hwirq)) {
 		pr_debug("irq: -> mapping failed, freeing\n");
-		irq_free_virt(virq, 1);
-		return -1;
+		goto error;
 	}
 
 	return 0;
+
+error:
+	irq_free_virt(virq, 1);
+	return -1;
 }
 
 unsigned int irq_create_direct_mapping(struct irq_host *host)
@@ -699,7 +731,7 @@ unsigned int irq_create_mapping(struct irq_host *host,
 EXPORT_SYMBOL_GPL(irq_create_mapping);
 
 unsigned int irq_create_of_mapping(struct device_node *controller,
-				   u32 *intspec, unsigned int intsize)
+				   const u32 *intspec, unsigned int intsize)
 {
 	struct irq_host *host;
 	irq_hw_number_t hwirq;
@@ -732,7 +764,7 @@ unsigned int irq_create_of_mapping(struct device_node *controller,
 
 	/* Set type if specified and different than the current one */
 	if (type != IRQ_TYPE_NONE &&
-	    type != (get_irq_desc(virq)->status & IRQF_TRIGGER_MASK))
+	    type != (irq_to_desc(virq)->status & IRQF_TRIGGER_MASK))
 		set_irq_type(virq, type);
 	return virq;
 }
@@ -804,7 +836,7 @@ void irq_dispose_mapping(unsigned int virq)
 	irq_map[virq].hwirq = host->inval_irq;
 
 	/* Set some flags */
-	get_irq_desc(virq)->status |= IRQ_NOREQUEST;
+	irq_to_desc(virq)->status |= IRQ_NOREQUEST;
 
 	/* Free it */
 	irq_free_virt(virq, 1);
@@ -996,12 +1028,24 @@ void irq_free_virt(unsigned int virq, unsigned int count)
 	spin_unlock_irqrestore(&irq_big_lock, flags);
 }
 
-void irq_early_init(void)
+int arch_early_irq_init(void)
 {
-	unsigned int i;
+	struct irq_desc *desc;
+	int i;
+
+	for (i = 0; i < NR_IRQS; i++) {
+		desc = irq_to_desc(i);
+		if (desc)
+			desc->status |= IRQ_NOREQUEST;
+	}
+
+	return 0;
+}
 
-	for (i = 0; i < NR_IRQS; i++)
-		get_irq_desc(i)->status |= IRQ_NOREQUEST;
+int arch_init_chip_data(struct irq_desc *desc, int node)
+{
+	desc->status |= IRQ_NOREQUEST;
+	return 0;
 }
 
 /* We need to create the radix trees late */
@@ -1063,16 +1107,19 @@ static int virq_debug_show(struct seq_file *m, void *private)
 	seq_printf(m, "%-5s  %-7s  %-15s  %s\n", "virq", "hwirq",
 		      "chip name", "host name");
 
-	for (i = 1; i < NR_IRQS; i++) {
-		desc = get_irq_desc(i);
+	for (i = 1; i < nr_irqs; i++) {
+		desc = irq_to_desc(i);
+		if (!desc)
+			continue;
+
 		spin_lock_irqsave(&desc->lock, flags);
 
 		if (desc->action && desc->action->handler) {
 			seq_printf(m, "%5d  ", i);
 			seq_printf(m, "0x%05lx  ", virq_to_hw(i));
 
-			if (desc->chip && desc->chip->typename)
-				p = desc->chip->typename;
+			if (desc->chip && desc->chip->name)
+				p = desc->chip->name;
 			else
 				p = none;
 			seq_printf(m, "%-15s  ", p);
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 641c74bb8e27..b6bd1eaa1c24 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -52,7 +52,7 @@ static struct hard_trap_info
 	{ 0x2030, 0x08 /* SIGFPE */  },		/* spe fp data */
 	{ 0x2040, 0x08 /* SIGFPE */  },		/* spe fp data */
 	{ 0x2050, 0x08 /* SIGFPE */  },		/* spe fp round */
-	{ 0x2060, 0x0e /* SIGILL */  },		/* performace monitor */
+	{ 0x2060, 0x0e /* SIGILL */  },		/* performance monitor */
 	{ 0x2900, 0x08 /* SIGFPE */  },		/* apu unavailable */
 	{ 0x3100, 0x0e /* SIGALRM */ },		/* fixed interval timer */
 	{ 0x3200, 0x02 /* SIGINT */  }, 	/* watchdog */
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index ed0ac4e4b8d8..79a00bb9c64c 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -781,9 +781,9 @@ static int __init lparcfg_init(void)
 			!firmware_has_feature(FW_FEATURE_ISERIES))
 		mode |= S_IWUSR;
 
-	ent = proc_create("ppc64/lparcfg", mode, NULL, &lparcfg_fops);
+	ent = proc_create("powerpc/lparcfg", mode, NULL, &lparcfg_fops);
 	if (!ent) {
-		printk(KERN_ERR "Failed to create ppc64/lparcfg\n");
+		printk(KERN_ERR "Failed to create powerpc/lparcfg\n");
 		return -EIO;
 	}
 
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index da9c0c4c10f3..8649f536f8df 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -502,15 +502,7 @@ _GLOBAL(clear_pages)
 	li	r0,PAGE_SIZE/L1_CACHE_BYTES
 	slw	r0,r0,r4
 	mtctr	r0
-#ifdef CONFIG_8xx
-	li	r4, 0
-1:	stw	r4, 0(r3)
-	stw	r4, 4(r3)
-	stw	r4, 8(r3)
-	stw	r4, 12(r3)
-#else
 1:	dcbz	0,r3
-#endif
 	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	1b
 	blr
@@ -535,15 +527,6 @@ _GLOBAL(copy_page)
 	addi	r3,r3,-4
 	addi	r4,r4,-4
 
-#ifdef CONFIG_8xx
-	/* don't use prefetch on 8xx */
-    	li	r0,4096/L1_CACHE_BYTES
-	mtctr	r0
-1:	COPY_16_BYTES
-	bdnz	1b
-	blr
-
-#else	/* not 8xx, we can prefetch */
 	li	r5,4
 
 #if MAX_COPY_PREFETCH > 1
@@ -584,7 +567,6 @@ _GLOBAL(copy_page)
 	li	r0,MAX_COPY_PREFETCH
 	li	r11,4
 	b	2b
-#endif	/* CONFIG_8xx */
 
 /*
  * void atomic_clear_mask(atomic_t mask, atomic_t *addr)
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index 0ed31f220482..ad461e735aec 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -139,8 +139,8 @@ out:
 
 }
 
-static int dev_nvram_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long dev_nvram_ioctl(struct file *file, unsigned int cmd,
+			    unsigned long arg)
 {
 	switch(cmd) {
 #ifdef CONFIG_PPC_PMAC
@@ -169,11 +169,11 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file,
 }
 
 const struct file_operations nvram_fops = {
-	.owner =	THIS_MODULE,
-	.llseek =	dev_nvram_llseek,
-	.read =		dev_nvram_read,
-	.write =	dev_nvram_write,
-	.ioctl =	dev_nvram_ioctl,
+	.owner		= THIS_MODULE,
+	.llseek		= dev_nvram_llseek,
+	.read		= dev_nvram_read,
+	.write		= dev_nvram_write,
+	.unlocked_ioctl	= dev_nvram_ioctl,
 };
 
 static struct miscdevice nvram_dev = {
@@ -184,7 +184,7 @@ static struct miscdevice nvram_dev = {
 
 
 #ifdef DEBUG_NVRAM
-static void nvram_print_partitions(char * label)
+static void __init nvram_print_partitions(char * label)
 {
 	struct list_head * p;
 	struct nvram_partition * tmp_part;
@@ -202,7 +202,7 @@ static void nvram_print_partitions(char * label)
 #endif
 
 
-static int nvram_write_header(struct nvram_partition * part)
+static int __init nvram_write_header(struct nvram_partition * part)
 {
 	loff_t tmp_index;
 	int rc;
@@ -214,7 +214,7 @@ static int nvram_write_header(struct nvram_partition * part)
 }
 
 
-static unsigned char nvram_checksum(struct nvram_header *p)
+static unsigned char __init nvram_checksum(struct nvram_header *p)
 {
 	unsigned int c_sum, c_sum2;
 	unsigned short *sp = (unsigned short *)p->name; /* assume 6 shorts */
@@ -228,32 +228,7 @@ static unsigned char nvram_checksum(struct nvram_header *p)
 	return c_sum;
 }
 
-
-/*
- * Find an nvram partition, sig can be 0 for any
- * partition or name can be NULL for any name, else
- * tries to match both
- */
-struct nvram_partition *nvram_find_partition(int sig, const char *name)
-{
-	struct nvram_partition * part;
-	struct list_head * p;
-
-	list_for_each(p, &nvram_part->partition) {
-		part = list_entry(p, struct nvram_partition, partition);
-
-		if (sig && part->header.signature != sig)
-			continue;
-		if (name && 0 != strncmp(name, part->header.name, 12))
-			continue;
-		return part; 
-	}
-	return NULL;
-}
-EXPORT_SYMBOL(nvram_find_partition);
-
-
-static int nvram_remove_os_partition(void)
+static int __init nvram_remove_os_partition(void)
 {
 	struct list_head *i;
 	struct list_head *j;
@@ -319,7 +294,7 @@ static int nvram_remove_os_partition(void)
  * Will create a partition starting at the first free
  * space found if space has enough room.
  */
-static int nvram_create_os_partition(void)
+static int __init nvram_create_os_partition(void)
 {
 	struct nvram_partition *part;
 	struct nvram_partition *new_part;
@@ -422,7 +397,7 @@ static int nvram_create_os_partition(void)
  * 5.) If the max chunk cannot be allocated then try finding a chunk
  * that will satisfy the minum needed (NVRAM_MIN_REQ).
  */
-static int nvram_setup_partition(void)
+static int __init nvram_setup_partition(void)
 {
 	struct list_head * p;
 	struct nvram_partition * part;
@@ -480,7 +455,7 @@ static int nvram_setup_partition(void)
 }
 
 
-static int nvram_scan_partitions(void)
+static int __init nvram_scan_partitions(void)
 {
 	loff_t cur_index = 0;
 	struct nvram_header phead;
@@ -706,6 +681,9 @@ int nvram_clear_error_log(void)
 	int clear_word = ERR_FLAG_ALREADY_LOGGED;
 	int rc;
 
+	if (nvram_error_log_index == -1)
+		return -1;
+
 	tmp_index = nvram_error_log_index;
 	
 	rc = ppc_md.nvram_write((char *)&clear_word, sizeof(int), &tmp_index);
diff --git a/arch/powerpc/kernel/perf_callchain.c b/arch/powerpc/kernel/perf_callchain.c
index 0a03cf70d247..936f04dbfc6f 100644
--- a/arch/powerpc/kernel/perf_callchain.c
+++ b/arch/powerpc/kernel/perf_callchain.c
@@ -119,13 +119,6 @@ static void perf_callchain_kernel(struct pt_regs *regs,
 }
 
 #ifdef CONFIG_PPC64
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define is_huge_psize(pagesize)	(HPAGE_SHIFT && mmu_huge_psizes[pagesize])
-#else
-#define is_huge_psize(pagesize)	0
-#endif
-
 /*
  * On 64-bit we don't want to invoke hash_page on user addresses from
  * interrupt context, so if the access faults, we read the page tables
@@ -135,7 +128,7 @@ static int read_user_stack_slow(void __user *ptr, void *ret, int nb)
 {
 	pgd_t *pgdir;
 	pte_t *ptep, pte;
-	int pagesize;
+	unsigned shift;
 	unsigned long addr = (unsigned long) ptr;
 	unsigned long offset;
 	unsigned long pfn;
@@ -145,17 +138,14 @@ static int read_user_stack_slow(void __user *ptr, void *ret, int nb)
 	if (!pgdir)
 		return -EFAULT;
 
-	pagesize = get_slice_psize(current->mm, addr);
+	ptep = find_linux_pte_or_hugepte(pgdir, addr, &shift);
+	if (!shift)
+		shift = PAGE_SHIFT;
 
 	/* align address to page boundary */
-	offset = addr & ((1ul << mmu_psize_defs[pagesize].shift) - 1);
+	offset = addr & ((1UL << shift) - 1);
 	addr -= offset;
 
-	if (is_huge_psize(pagesize))
-		ptep = huge_pte_offset(current->mm, addr);
-	else
-		ptep = find_linux_pte(pgdir, addr);
-
 	if (ptep == NULL)
 		return -EFAULT;
 	pte = *ptep;
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index 87f1663584b0..1eb85fbf53a5 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -1165,7 +1165,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	 */
 	if (record) {
 		struct perf_sample_data data = {
-			.addr	= 0,
+			.addr	= ~0ULL,
 			.period	= event->hw.last_period,
 		};
 
diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c
index 0f4c1c73a6ad..199de527d411 100644
--- a/arch/powerpc/kernel/power5+-pmu.c
+++ b/arch/powerpc/kernel/power5+-pmu.c
@@ -73,10 +73,6 @@
 #define MMCR1_PMCSEL_MSK	0x7f
 
 /*
- * Bits in MMCRA
- */
-
-/*
  * Layout of constraint bits:
  * 6666555555555544444444443333333333222222222211111111110000000000
  * 3210987654321098765432109876543210987654321098765432109876543210
diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c
index c351b3a57fbb..98b6a729a9dd 100644
--- a/arch/powerpc/kernel/power5-pmu.c
+++ b/arch/powerpc/kernel/power5-pmu.c
@@ -73,10 +73,6 @@
 #define MMCR1_PMCSEL_MSK	0x7f
 
 /*
- * Bits in MMCRA
- */
-
-/*
  * Layout of constraint bits:
  * 6666555555555544444444443333333333222222222211111111110000000000
  * 3210987654321098765432109876543210987654321098765432109876543210
@@ -390,7 +386,7 @@ static int power5_compute_mmcr(u64 event[], int n_ev,
 			       unsigned int hwc[], unsigned long mmcr[])
 {
 	unsigned long mmcr1 = 0;
-	unsigned long mmcra = 0;
+	unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;
 	unsigned int pmc, unit, byte, psel;
 	unsigned int ttm, grp;
 	int i, isbus, bit, grsel;
diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c
index ca399ba5034c..84a607bda8fb 100644
--- a/arch/powerpc/kernel/power6-pmu.c
+++ b/arch/powerpc/kernel/power6-pmu.c
@@ -178,7 +178,7 @@ static int p6_compute_mmcr(u64 event[], int n_ev,
 			   unsigned int hwc[], unsigned long mmcr[])
 {
 	unsigned long mmcr1 = 0;
-	unsigned long mmcra = 0;
+	unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;
 	int i;
 	unsigned int pmc, ev, b, u, s, psel;
 	unsigned int ttmset = 0;
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index 28a4daacdc02..852f7b7f6b40 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -51,10 +51,6 @@
 #define MMCR1_PMCSEL_MSK	0xff
 
 /*
- * Bits in MMCRA
- */
-
-/*
  * Layout of constraint bits:
  * 6666555555555544444444443333333333222222222211111111110000000000
  * 3210987654321098765432109876543210987654321098765432109876543210
@@ -230,7 +226,7 @@ static int power7_compute_mmcr(u64 event[], int n_ev,
 			       unsigned int hwc[], unsigned long mmcr[])
 {
 	unsigned long mmcr1 = 0;
-	unsigned long mmcra = 0;
+	unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;
 	unsigned int pmc, unit, combine, l2sel, psel;
 	unsigned int pmc_inuse = 0;
 	int i;
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
index 479574413a93..8eff48e20dba 100644
--- a/arch/powerpc/kernel/ppc970-pmu.c
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -84,10 +84,6 @@ static short mmcr1_adder_bits[8] = {
 };
 
 /*
- * Bits in MMCRA
- */
-
-/*
  * Layout of constraint bits:
  * 6666555555555544444444443333333333222222222211111111110000000000
  * 3210987654321098765432109876543210987654321098765432109876543210
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index c8b27bb4dbde..425451453e96 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -96,8 +96,6 @@ EXPORT_SYMBOL(copy_4K_page);
 EXPORT_SYMBOL(isa_io_base);
 EXPORT_SYMBOL(isa_mem_base);
 EXPORT_SYMBOL(pci_dram_offset);
-EXPORT_SYMBOL(pci_alloc_consistent);
-EXPORT_SYMBOL(pci_free_consistent);
 #endif /* CONFIG_PCI */
 
 EXPORT_SYMBOL(start_thread);
@@ -162,7 +160,6 @@ EXPORT_SYMBOL(screen_info);
 
 #ifdef CONFIG_PPC32
 EXPORT_SYMBOL(timer_interrupt);
-EXPORT_SYMBOL(irq_desc);
 EXPORT_SYMBOL(tb_ticks_per_jiffy);
 EXPORT_SYMBOL(cacheable_memcpy);
 EXPORT_SYMBOL(cacheable_memzero);
diff --git a/arch/powerpc/kernel/proc_ppc64.c b/arch/powerpc/kernel/proc_powerpc.c
index c647ddef40dc..1ed3b8d7981e 100644
--- a/arch/powerpc/kernel/proc_ppc64.c
+++ b/arch/powerpc/kernel/proc_powerpc.c
@@ -28,55 +28,7 @@
 #include <asm/uaccess.h>
 #include <asm/prom.h>
 
-static loff_t  page_map_seek( struct file *file, loff_t off, int whence);
-static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes,
-			      loff_t *ppos);
-static int     page_map_mmap( struct file *file, struct vm_area_struct *vma );
-
-static const struct file_operations page_map_fops = {
-	.llseek	= page_map_seek,
-	.read	= page_map_read,
-	.mmap	= page_map_mmap
-};
-
-/*
- * Create the ppc64 and ppc64/rtas directories early. This allows us to
- * assume that they have been previously created in drivers.
- */
-static int __init proc_ppc64_create(void)
-{
-	struct proc_dir_entry *root;
-
-	root = proc_mkdir("ppc64", NULL);
-	if (!root)
-		return 1;
-
-	if (!of_find_node_by_path("/rtas"))
-		return 0;
-
-	if (!proc_mkdir("rtas", root))
-		return 1;
-
-	if (!proc_symlink("rtas", NULL, "ppc64/rtas"))
-		return 1;
-
-	return 0;
-}
-core_initcall(proc_ppc64_create);
-
-static int __init proc_ppc64_init(void)
-{
-	struct proc_dir_entry *pde;
-
-	pde = proc_create_data("ppc64/systemcfg", S_IFREG|S_IRUGO, NULL,
-			       &page_map_fops, vdso_data);
-	if (!pde)
-		return 1;
-	pde->size = PAGE_SIZE;
-
-	return 0;
-}
-__initcall(proc_ppc64_init);
+#ifdef CONFIG_PPC64
 
 static loff_t page_map_seek( struct file *file, loff_t off, int whence)
 {
@@ -120,3 +72,55 @@ static int page_map_mmap( struct file *file, struct vm_area_struct *vma )
 	return 0;
 }
 
+static const struct file_operations page_map_fops = {
+	.llseek	= page_map_seek,
+	.read	= page_map_read,
+	.mmap	= page_map_mmap
+};
+
+
+static int __init proc_ppc64_init(void)
+{
+	struct proc_dir_entry *pde;
+
+	pde = proc_create_data("powerpc/systemcfg", S_IFREG|S_IRUGO, NULL,
+			       &page_map_fops, vdso_data);
+	if (!pde)
+		return 1;
+	pde->size = PAGE_SIZE;
+
+	return 0;
+}
+__initcall(proc_ppc64_init);
+
+#endif /* CONFIG_PPC64 */
+
+/*
+ * Create the ppc64 and ppc64/rtas directories early. This allows us to
+ * assume that they have been previously created in drivers.
+ */
+static int __init proc_ppc64_create(void)
+{
+	struct proc_dir_entry *root;
+
+	root = proc_mkdir("powerpc", NULL);
+	if (!root)
+		return 1;
+
+#ifdef CONFIG_PPC64
+	if (!proc_symlink("ppc64", NULL, "powerpc"))
+		pr_err("Failed to create link /proc/ppc64 -> /proc/powerpc\n");
+#endif
+
+	if (!of_find_node_by_path("/rtas"))
+		return 0;
+
+	if (!proc_mkdir("rtas", root))
+		return 1;
+
+	if (!proc_symlink("rtas", NULL, "powerpc/rtas"))
+		return 1;
+
+	return 0;
+}
+core_initcall(proc_ppc64_create);
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index d4405b95bfaa..4ec300862466 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -1317,29 +1317,6 @@ struct device_node *of_find_next_cache_node(struct device_node *np)
 }
 
 /**
- *	of_find_all_nodes - Get next node in global list
- *	@prev:	Previous node or NULL to start iteration
- *		of_node_put() will be called on it
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_all_nodes(struct device_node *prev)
-{
-	struct device_node *np;
-
-	read_lock(&devtree_lock);
-	np = prev ? prev->allnext : allnodes;
-	for (; np != 0; np = np->allnext)
-		if (of_node_get(np))
-			break;
-	of_node_put(prev);
-	read_unlock(&devtree_lock);
-	return np;
-}
-EXPORT_SYMBOL(of_find_all_nodes);
-
-/**
  *	of_node_get - Increment refcount of a node
  *	@node:	Node to inc refcount, NULL is supported to
  *		simplify writing of callers
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 13011a96a977..a85117d5c9a4 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -6,7 +6,7 @@
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
  *
- * /proc/ppc64/rtas/firmware_flash interface
+ * /proc/powerpc/rtas/firmware_flash interface
  *
  * This file implements a firmware_flash interface to pump a firmware
  * image into the kernel.  At reboot time rtas_restart() will see the
@@ -740,7 +740,7 @@ static int __init rtas_flash_init(void)
 		return 1;
 	}
 
-	firmware_flash_pde = create_flash_pde("ppc64/rtas/"
+	firmware_flash_pde = create_flash_pde("powerpc/rtas/"
 					      FIRMWARE_FLASH_NAME,
 					      &rtas_flash_operations);
 	if (firmware_flash_pde == NULL) {
@@ -754,7 +754,7 @@ static int __init rtas_flash_init(void)
 	if (rc != 0)
 		goto cleanup;
 
-	firmware_update_pde = create_flash_pde("ppc64/rtas/"
+	firmware_update_pde = create_flash_pde("powerpc/rtas/"
 					       FIRMWARE_UPDATE_NAME,
 					       &rtas_flash_operations);
 	if (firmware_update_pde == NULL) {
@@ -768,7 +768,7 @@ static int __init rtas_flash_init(void)
 	if (rc != 0)
 		goto cleanup;
 
-	validate_pde = create_flash_pde("ppc64/rtas/" VALIDATE_FLASH_NAME,
+	validate_pde = create_flash_pde("powerpc/rtas/" VALIDATE_FLASH_NAME,
 			      		&validate_flash_operations);
 	if (validate_pde == NULL) {
 		rc = -ENOMEM;
@@ -781,7 +781,7 @@ static int __init rtas_flash_init(void)
 	if (rc != 0)
 		goto cleanup;
 
-	manage_pde = create_flash_pde("ppc64/rtas/" MANAGE_FLASH_NAME,
+	manage_pde = create_flash_pde("powerpc/rtas/" MANAGE_FLASH_NAME,
 				      &manage_flash_operations);
 	if (manage_pde == NULL) {
 		rc = -ENOMEM;
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/kernel/rtasd.c
index b3cbac855924..2e4832ab2108 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/kernel/rtasd.c
@@ -39,6 +39,7 @@ static unsigned long rtas_log_start;
 static unsigned long rtas_log_size;
 
 static int surveillance_timeout = -1;
+
 static unsigned int rtas_error_log_max;
 static unsigned int rtas_error_log_buffer_max;
 
@@ -213,9 +214,11 @@ void pSeries_log_error(char *buf, unsigned int err_type, int fatal)
 		return;
 	}
 
+#ifdef CONFIG_PPC64
 	/* Write error to NVRAM */
 	if (logging_enabled && !(err_type & ERR_FLAG_BOOT))
 		nvram_write_error_log(buf, len, err_type, error_log_cnt);
+#endif /* CONFIG_PPC64 */
 
 	/*
 	 * rtas errors can occur during boot, and we do want to capture
@@ -264,7 +267,6 @@ void pSeries_log_error(char *buf, unsigned int err_type, int fatal)
 
 }
 
-
 static int rtas_log_open(struct inode * inode, struct file * file)
 {
 	return 0;
@@ -300,6 +302,7 @@ static ssize_t rtas_log_read(struct file * file, char __user * buf,
 		return -ENOMEM;
 
 	spin_lock_irqsave(&rtasd_log_lock, s);
+
 	/* if it's 0, then we know we got the last one (the one in NVRAM) */
 	while (rtas_log_size == 0) {
 		if (file->f_flags & O_NONBLOCK) {
@@ -313,7 +316,9 @@ static ssize_t rtas_log_read(struct file * file, char __user * buf,
 			error = -ENODATA;
 			goto out;
 		}
+#ifdef CONFIG_PPC64
 		nvram_clear_error_log();
+#endif /* CONFIG_PPC64 */
 
 		spin_unlock_irqrestore(&rtasd_log_lock, s);
 		error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
@@ -427,14 +432,11 @@ static void rtas_event_scan(struct work_struct *w)
 	put_online_cpus();
 }
 
-static void start_event_scan(void)
+#ifdef CONFIG_PPC64
+static void retreive_nvram_error_log(void)
 {
-	unsigned int err_type;
-	int rc;
-
-	printk(KERN_DEBUG "RTAS daemon started\n");
-	pr_debug("rtasd: will sleep for %d milliseconds\n",
-		 (30000 / rtas_event_scan_rate));
+	unsigned int err_type ;
+	int rc ;
 
 	/* See if we have any error stored in NVRAM */
 	memset(logdata, 0, rtas_error_log_max);
@@ -442,12 +444,26 @@ static void start_event_scan(void)
 	                          &err_type, &error_log_cnt);
 	/* We can use rtas_log_buf now */
 	logging_enabled = 1;
-
 	if (!rc) {
 		if (err_type != ERR_FLAG_ALREADY_LOGGED) {
 			pSeries_log_error(logdata, err_type | ERR_FLAG_BOOT, 0);
 		}
 	}
+}
+#else /* CONFIG_PPC64 */
+static void retreive_nvram_error_log(void)
+{
+}
+#endif /* CONFIG_PPC64 */
+
+static void start_event_scan(void)
+{
+	printk(KERN_DEBUG "RTAS daemon started\n");
+	pr_debug("rtasd: will sleep for %d milliseconds\n",
+		 (30000 / rtas_event_scan_rate));
+
+	/* Retreive errors from nvram if any */
+	retreive_nvram_error_log();
 
 	schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work,
 				 event_scan_delay);
@@ -457,13 +473,13 @@ static int __init rtas_init(void)
 {
 	struct proc_dir_entry *entry;
 
-	if (!machine_is(pseries))
+	if (!machine_is(pseries) && !machine_is(chrp))
 		return 0;
 
 	/* No RTAS */
 	event_scan = rtas_token("event-scan");
 	if (event_scan == RTAS_UNKNOWN_SERVICE) {
-		printk(KERN_DEBUG "rtasd: no event-scan on system\n");
+		printk(KERN_INFO "rtasd: No event-scan on system\n");
 		return -ENODEV;
 	}
 
@@ -483,7 +499,7 @@ static int __init rtas_init(void)
 		return -ENOMEM;
 	}
 
-	entry = proc_create("ppc64/rtas/error_log", S_IRUSR, NULL,
+	entry = proc_create("powerpc/rtas/error_log", S_IRUSR, NULL,
 			    &proc_rtas_log_operations);
 	if (!entry)
 		printk(KERN_ERR "Failed to create error_log proc entry\n");
@@ -492,11 +508,16 @@ static int __init rtas_init(void)
 
 	return 0;
 }
+__initcall(rtas_init);
 
 static int __init surveillance_setup(char *str)
 {
 	int i;
 
+	/* We only do surveillance on pseries */
+	if (!machine_is(pseries))
+		return 0;
+
 	if (get_option(&str,&i)) {
 		if (i >= 0 && i <= 255)
 			surveillance_timeout = i;
@@ -504,6 +525,7 @@ static int __init surveillance_setup(char *str)
 
 	return 1;
 }
+__setup("surveillance=", surveillance_setup);
 
 static int __init rtasmsgs_setup(char *str)
 {
@@ -514,6 +536,4 @@ static int __init rtasmsgs_setup(char *str)
 
 	return 1;
 }
-__initcall(rtas_init);
-__setup("surveillance=", surveillance_setup);
 __setup("rtasmsgs=", rtasmsgs_setup);
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 4271f7a655a3..845c72ab7357 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -660,6 +660,7 @@ late_initcall(check_cache_coherency);
 
 #ifdef CONFIG_DEBUG_FS
 struct dentry *powerpc_debugfs_root;
+EXPORT_SYMBOL(powerpc_debugfs_root);
 
 static int powerpc_debugfs_init(void)
 {
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 53bcf3d792db..b152de3e64d4 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -345,7 +345,7 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_SWIOTLB
 	if (ppc_swiotlb_enable)
-		swiotlb_init();
+		swiotlb_init(1);
 #endif
 
 	paging_init();
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 04f638d82fb3..6568406b2a30 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -356,11 +356,6 @@ void __init setup_system(void)
 	 */
 	initialize_cache_info();
 
-	/*
-	 * Initialize irq remapping subsystem
-	 */
-	irq_early_init();
-
 #ifdef CONFIG_PPC_RTAS
 	/*
 	 * Initialize RTAS if available
@@ -550,7 +545,7 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_SWIOTLB
 	if (ppc_swiotlb_enable)
-		swiotlb_init();
+		swiotlb_init(1);
 #endif
 
 	paging_init();
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 9b86a74d2815..97196eefef3e 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -218,6 +218,9 @@ void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *))
 
 static void stop_this_cpu(void *dummy)
 {
+	/* Remove this CPU */
+	set_cpu_online(smp_processor_id(), false);
+
 	local_irq_disable();
 	while (1)
 		;
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index b97c2d67f4ac..c5a4732bcc48 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -520,58 +520,6 @@ asmlinkage long compat_sys_umask(u32 mask)
 	return sys_umask((int)mask);
 }
 
-#ifdef CONFIG_SYSCTL_SYSCALL
-struct __sysctl_args32 {
-	u32 name;
-	int nlen;
-	u32 oldval;
-	u32 oldlenp;
-	u32 newval;
-	u32 newlen;
-	u32 __unused[4];
-};
-
-asmlinkage long compat_sys_sysctl(struct __sysctl_args32 __user *args)
-{
-	struct __sysctl_args32 tmp;
-	int error;
-	size_t oldlen;
-	size_t __user *oldlenp = NULL;
-	unsigned long addr = (((unsigned long)&args->__unused[0]) + 7) & ~7;
-
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		return -EFAULT;
-
-	if (tmp.oldval && tmp.oldlenp) {
-		/* Duh, this is ugly and might not work if sysctl_args
-		   is in read-only memory, but do_sysctl does indirectly
-		   a lot of uaccess in both directions and we'd have to
-		   basically copy the whole sysctl.c here, and
-		   glibc's __sysctl uses rw memory for the structure
-		   anyway.  */
-		oldlenp = (size_t __user *)addr;
-		if (get_user(oldlen, (compat_size_t __user *)compat_ptr(tmp.oldlenp)) ||
-		    put_user(oldlen, oldlenp))
-			return -EFAULT;
-	}
-
-	lock_kernel();
-	error = do_sysctl(compat_ptr(tmp.name), tmp.nlen,
-			  compat_ptr(tmp.oldval), oldlenp,
-			  compat_ptr(tmp.newval), tmp.newlen);
-	unlock_kernel();
-	if (oldlenp) {
-		if (!error) {
-			if (get_user(oldlen, oldlenp) ||
-			    put_user(oldlen, (compat_size_t __user *)compat_ptr(tmp.oldlenp)))
-				error = -EFAULT;
-		}
-		copy_to_user(args->__unused, tmp.__unused, sizeof(tmp.__unused));
-	}
-	return error;
-}
-#endif
-
 unsigned long compat_sys_mmap2(unsigned long addr, size_t len,
 			  unsigned long prot, unsigned long flags,
 			  unsigned long fd, unsigned long pgoff)
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index c04832c4a02e..3370e62e43d4 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -140,7 +140,6 @@ static inline unsigned long do_mmap2(unsigned long addr, size_t len,
 			unsigned long prot, unsigned long flags,
 			unsigned long fd, unsigned long off, int shift)
 {
-	struct file * file = NULL;
 	unsigned long ret = -EINVAL;
 
 	if (!arch_validate_prot(prot))
@@ -151,20 +150,8 @@ static inline unsigned long do_mmap2(unsigned long addr, size_t len,
 			goto out;
 		off >>= shift;
 	}
-		
-	ret = -EBADF;
-	if (!(flags & MAP_ANONYMOUS)) {
-		if (!(file = fget(fd)))
-			goto out;
-	}
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
 
-	down_write(&current->mm->mmap_sem);
-	ret = do_mmap_pgoff(file, addr, len, prot, flags, off);
-	up_write(&current->mm->mmap_sem);
-	if (file)
-		fput(file);
+	ret = sys_mmap_pgoff(addr, len, prot, flags, fd, off);
 out:
 	return ret;
 }
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 956ab33fd73f..e235e52dc4fe 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -461,6 +461,25 @@ static void unregister_cpu_online(unsigned int cpu)
 
 	cacheinfo_cpu_offline(cpu);
 }
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+ssize_t arch_cpu_probe(const char *buf, size_t count)
+{
+	if (ppc_md.cpu_probe)
+		return ppc_md.cpu_probe(buf, count);
+
+	return -EINVAL;
+}
+
+ssize_t arch_cpu_release(const char *buf, size_t count)
+{
+	if (ppc_md.cpu_release)
+		return ppc_md.cpu_release(buf, count);
+
+	return -EINVAL;
+}
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
+
 #endif /* CONFIG_HOTPLUG_CPU */
 
 static int __cpuinit sysfs_cpu_notify(struct notifier_block *self,
diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index c3a56d65c5a9..a753b72efbc0 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -59,7 +59,7 @@ void set_thresholds(unsigned long cpu)
 	mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID);
 
 	/* setup THRM2,
-	 * threshold, valid bit, enable interrupts, interrupt when above threshhold
+	 * threshold, valid bit, enable interrupts, interrupt when above threshold
 	 */
 	mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE);
 #else
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index a136a11c490d..9ba2cc88591d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -54,6 +54,7 @@
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/perf_event.h>
+#include <asm/trace.h>
 
 #include <asm/io.h>
 #include <asm/processor.h>
@@ -268,6 +269,7 @@ void account_system_vtime(struct task_struct *tsk)
 	per_cpu(cputime_scaled_last_delta, smp_processor_id()) = deltascaled;
 	local_irq_restore(flags);
 }
+EXPORT_SYMBOL_GPL(account_system_vtime);
 
 /*
  * Transfer the user and system times accumulated in the paca
@@ -571,6 +573,8 @@ void timer_interrupt(struct pt_regs * regs)
 	struct clock_event_device *evt = &decrementer->event;
 	u64 now;
 
+	trace_timer_interrupt_entry(regs);
+
 	/* Ensure a positive value is written to the decrementer, or else
 	 * some CPUs will continuue to take decrementer exceptions */
 	set_dec(DECREMENTER_MAX);
@@ -590,6 +594,7 @@ void timer_interrupt(struct pt_regs * regs)
 		now = decrementer->next_tb - now;
 		if (now <= DECREMENTER_MAX)
 			set_dec((int)now);
+		trace_timer_interrupt_exit(regs);
 		return;
 	}
 	old_regs = set_irq_regs(regs);
@@ -620,6 +625,8 @@ void timer_interrupt(struct pt_regs * regs)
 
 	irq_exit();
 	set_irq_regs(old_regs);
+
+	trace_timer_interrupt_exit(regs);
 }
 
 void wakeup_decrementer(void)
@@ -828,7 +835,8 @@ static cycle_t timebase_read(struct clocksource *cs)
 	return (cycle_t)get_tb();
 }
 
-void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
+void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
+		     u32 mult)
 {
 	u64 t2x, stamp_xsec;
 
@@ -841,7 +849,7 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
 
 	/* XXX this assumes clock->shift == 22 */
 	/* 4611686018 ~= 2^(20+64-22) / 1e9 */
-	t2x = (u64) clock->mult * 4611686018ULL;
+	t2x = (u64) mult * 4611686018ULL;
 	stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
 	do_div(stamp_xsec, 1000000000);
 	stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
@@ -918,7 +926,7 @@ static void register_decrementer_clockevent(int cpu)
 	*dec = decrementer_clockevent;
 	dec->cpumask = cpumask_of(cpu);
 
-	printk(KERN_DEBUG "clockevent: %s mult[%lx] shift[%d] cpu[%d]\n",
+	printk(KERN_DEBUG "clockevent: %s mult[%x] shift[%d] cpu[%d]\n",
 	       dec->name, dec->mult, dec->shift, cpu);
 
 	clockevents_register_device(dec);
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 6f0ae1a9bfae..804f0f30f227 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -198,28 +198,6 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
 	info.si_code = code;
 	info.si_addr = (void __user *) addr;
 	force_sig_info(signr, &info, current);
-
-	/*
-	 * Init gets no signals that it doesn't have a handler for.
-	 * That's all very well, but if it has caused a synchronous
-	 * exception and we ignore the resulting signal, it will just
-	 * generate the same exception over and over again and we get
-	 * nowhere.  Better to kill it and let the kernel panic.
-	 */
-	if (is_global_init(current)) {
-		__sighandler_t handler;
-
-		spin_lock_irq(&current->sighand->siglock);
-		handler = current->sighand->action[signr-1].sa.sa_handler;
-		spin_unlock_irq(&current->sighand->siglock);
-		if (handler == SIG_DFL) {
-			/* init has generated a synchronous exception
-			   and it doesn't have a handler for the signal */
-			printk(KERN_CRIT "init has generated signal %d "
-			       "but has no handler for it\n", signr);
-			do_exit(signr);
-		}
-	}
 }
 
 #ifdef CONFIG_PPC64
@@ -759,7 +737,7 @@ static int emulate_instruction(struct pt_regs *regs)
 
 	/* Emulate the mfspr rD, PVR. */
 	if ((instword & PPC_INST_MFSPR_PVR_MASK) == PPC_INST_MFSPR_PVR) {
-		PPC_WARN_EMULATED(mfpvr);
+		PPC_WARN_EMULATED(mfpvr, regs);
 		rd = (instword >> 21) & 0x1f;
 		regs->gpr[rd] = mfspr(SPRN_PVR);
 		return 0;
@@ -767,7 +745,7 @@ static int emulate_instruction(struct pt_regs *regs)
 
 	/* Emulating the dcba insn is just a no-op.  */
 	if ((instword & PPC_INST_DCBA_MASK) == PPC_INST_DCBA) {
-		PPC_WARN_EMULATED(dcba);
+		PPC_WARN_EMULATED(dcba, regs);
 		return 0;
 	}
 
@@ -776,7 +754,7 @@ static int emulate_instruction(struct pt_regs *regs)
 		int shift = (instword >> 21) & 0x1c;
 		unsigned long msk = 0xf0000000UL >> shift;
 
-		PPC_WARN_EMULATED(mcrxr);
+		PPC_WARN_EMULATED(mcrxr, regs);
 		regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk);
 		regs->xer &= ~0xf0000000UL;
 		return 0;
@@ -784,19 +762,19 @@ static int emulate_instruction(struct pt_regs *regs)
 
 	/* Emulate load/store string insn. */
 	if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) {
-		PPC_WARN_EMULATED(string);
+		PPC_WARN_EMULATED(string, regs);
 		return emulate_string_inst(regs, instword);
 	}
 
 	/* Emulate the popcntb (Population Count Bytes) instruction. */
 	if ((instword & PPC_INST_POPCNTB_MASK) == PPC_INST_POPCNTB) {
-		PPC_WARN_EMULATED(popcntb);
+		PPC_WARN_EMULATED(popcntb, regs);
 		return emulate_popcntb_inst(regs, instword);
 	}
 
 	/* Emulate isel (Integer Select) instruction */
 	if ((instword & PPC_INST_ISEL_MASK) == PPC_INST_ISEL) {
-		PPC_WARN_EMULATED(isel);
+		PPC_WARN_EMULATED(isel, regs);
 		return emulate_isel(regs, instword);
 	}
 
@@ -995,7 +973,7 @@ void SoftwareEmulation(struct pt_regs *regs)
 #ifdef CONFIG_MATH_EMULATION
 	errcode = do_mathemu(regs);
 	if (errcode >= 0)
-		PPC_WARN_EMULATED(math);
+		PPC_WARN_EMULATED(math, regs);
 
 	switch (errcode) {
 	case 0:
@@ -1018,7 +996,7 @@ void SoftwareEmulation(struct pt_regs *regs)
 #elif defined(CONFIG_8XX_MINIMAL_FPEMU)
 	errcode = Soft_emulate_8xx(regs);
 	if (errcode >= 0)
-		PPC_WARN_EMULATED(8xx);
+		PPC_WARN_EMULATED(8xx, regs);
 
 	switch (errcode) {
 	case 0:
@@ -1129,7 +1107,7 @@ void altivec_assist_exception(struct pt_regs *regs)
 
 	flush_altivec_to_thread(current);
 
-	PPC_WARN_EMULATED(altivec);
+	PPC_WARN_EMULATED(altivec, regs);
 	err = emulate_altivec(regs);
 	if (err == 0) {
 		regs->nip += 4;		/* skip emulated instruction */
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 137dc22afa42..d84d19224a95 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -721,7 +721,7 @@ static int __init vdso_init(void)
 
 #ifdef CONFIG_PPC64
 	/*
-	 * Fill up the "systemcfg" stuff for backward compatiblity
+	 * Fill up the "systemcfg" stuff for backward compatibility
 	 */
 	strcpy((char *)vdso_data->eye_catcher, "SYSTEMCFG:PPC64");
 	vdso_data->version.major = SYSTEMCFG_MAJOR;
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 67b6916f0e94..fe460482fa68 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -58,7 +58,7 @@ _GLOBAL(load_up_altivec)
 	 * all 1's
 	 */
 	mfspr	r4,SPRN_VRSAVE
-	cmpdi	0,r4,0
+	cmpwi	0,r4,0
 	bne+	1f
 	li	r4,-1
 	mtspr	SPRN_VRSAVE,r4
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index c29926846613..07703f72330e 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -21,6 +21,23 @@ config KVM
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
 
+config KVM_BOOK3S_64_HANDLER
+	bool
+
+config KVM_BOOK3S_64
+	tristate "KVM support for PowerPC book3s_64 processors"
+	depends on EXPERIMENTAL && PPC64
+	select KVM
+	select KVM_BOOK3S_64_HANDLER
+	---help---
+	  Support running unmodified book3s_64 and book3s_32 guest kernels
+	  in virtual machines on book3s_64 host processors.
+
+	  This module provides access to the hardware capabilities through
+	  a character device node named /dev/kvm.
+
+	  If unsure, say N.
+
 config KVM_440
 	bool "KVM support for PowerPC 440 processors"
 	depends on EXPERIMENTAL && 44x
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 37655fe19f2f..56484d652377 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -12,26 +12,45 @@ CFLAGS_44x_tlb.o  := -I.
 CFLAGS_e500_tlb.o := -I.
 CFLAGS_emulate.o  := -I.
 
-kvm-objs := $(common-objs-y) powerpc.o emulate.o
+common-objs-y += powerpc.o emulate.o
 obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o
-obj-$(CONFIG_KVM) += kvm.o
+obj-$(CONFIG_KVM_BOOK3S_64_HANDLER) += book3s_64_exports.o
 
 AFLAGS_booke_interrupts.o := -I$(obj)
 
 kvm-440-objs := \
+	$(common-objs-y) \
 	booke.o \
 	booke_emulate.o \
 	booke_interrupts.o \
 	44x.o \
 	44x_tlb.o \
 	44x_emulate.o
-obj-$(CONFIG_KVM_440) += kvm-440.o
+kvm-objs-$(CONFIG_KVM_440) := $(kvm-440-objs)
 
 kvm-e500-objs := \
+	$(common-objs-y) \
 	booke.o \
 	booke_emulate.o \
 	booke_interrupts.o \
 	e500.o \
 	e500_tlb.o \
 	e500_emulate.o
-obj-$(CONFIG_KVM_E500) += kvm-e500.o
+kvm-objs-$(CONFIG_KVM_E500) := $(kvm-e500-objs)
+
+kvm-book3s_64-objs := \
+	$(common-objs-y) \
+	book3s.o \
+	book3s_64_emulate.o \
+	book3s_64_interrupts.o \
+	book3s_64_mmu_host.o \
+	book3s_64_mmu.o \
+	book3s_32_mmu.o
+kvm-objs-$(CONFIG_KVM_BOOK3S_64) := $(kvm-book3s_64-objs)
+
+kvm-objs := $(kvm-objs-m) $(kvm-objs-y)
+
+obj-$(CONFIG_KVM_440) += kvm.o
+obj-$(CONFIG_KVM_E500) += kvm.o
+obj-$(CONFIG_KVM_BOOK3S_64) += kvm.o
+
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
new file mode 100644
index 000000000000..3e294bd9b8c6
--- /dev/null
+++ b/arch/powerpc/kvm/book3s.c
@@ -0,0 +1,974 @@
+/*
+ * Copyright (C) 2009. SUSE Linux Products GmbH. All rights reserved.
+ *
+ * Authors:
+ *    Alexander Graf <agraf@suse.de>
+ *    Kevin Wolf <mail@kevin-wolf.de>
+ *
+ * Description:
+ * This file is derived from arch/powerpc/kvm/44x.c,
+ * by Hollis Blanchard <hollisb@us.ibm.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kvm_host.h>
+#include <linux/err.h>
+
+#include <asm/reg.h>
+#include <asm/cputable.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+#include <asm/mmu_context.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+
+#define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
+
+/* #define EXIT_DEBUG */
+/* #define EXIT_DEBUG_SIMPLE */
+
+/* Without AGGRESSIVE_DEC we only fire off a DEC interrupt when DEC turns 0.
+ * When set, we retrigger a DEC interrupt after that if DEC <= 0.
+ * PPC32 Linux runs faster without AGGRESSIVE_DEC, PPC64 Linux requires it. */
+
+/* #define AGGRESSIVE_DEC */
+
+struct kvm_stats_debugfs_item debugfs_entries[] = {
+	{ "exits",       VCPU_STAT(sum_exits) },
+	{ "mmio",        VCPU_STAT(mmio_exits) },
+	{ "sig",         VCPU_STAT(signal_exits) },
+	{ "sysc",        VCPU_STAT(syscall_exits) },
+	{ "inst_emu",    VCPU_STAT(emulated_inst_exits) },
+	{ "dec",         VCPU_STAT(dec_exits) },
+	{ "ext_intr",    VCPU_STAT(ext_intr_exits) },
+	{ "queue_intr",  VCPU_STAT(queue_intr) },
+	{ "halt_wakeup", VCPU_STAT(halt_wakeup) },
+	{ "pf_storage",  VCPU_STAT(pf_storage) },
+	{ "sp_storage",  VCPU_STAT(sp_storage) },
+	{ "pf_instruc",  VCPU_STAT(pf_instruc) },
+	{ "sp_instruc",  VCPU_STAT(sp_instruc) },
+	{ "ld",          VCPU_STAT(ld) },
+	{ "ld_slow",     VCPU_STAT(ld_slow) },
+	{ "st",          VCPU_STAT(st) },
+	{ "st_slow",     VCPU_STAT(st_slow) },
+	{ NULL }
+};
+
+void kvmppc_core_load_host_debugstate(struct kvm_vcpu *vcpu)
+{
+}
+
+void kvmppc_core_load_guest_debugstate(struct kvm_vcpu *vcpu)
+{
+}
+
+void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
+{
+	memcpy(get_paca()->kvm_slb, to_book3s(vcpu)->slb_shadow, sizeof(get_paca()->kvm_slb));
+	get_paca()->kvm_slb_max = to_book3s(vcpu)->slb_shadow_max;
+}
+
+void kvmppc_core_vcpu_put(struct kvm_vcpu *vcpu)
+{
+	memcpy(to_book3s(vcpu)->slb_shadow, get_paca()->kvm_slb, sizeof(get_paca()->kvm_slb));
+	to_book3s(vcpu)->slb_shadow_max = get_paca()->kvm_slb_max;
+}
+
+#if defined(AGGRESSIVE_DEC) || defined(EXIT_DEBUG)
+static u32 kvmppc_get_dec(struct kvm_vcpu *vcpu)
+{
+	u64 jd = mftb() - vcpu->arch.dec_jiffies;
+	return vcpu->arch.dec - jd;
+}
+#endif
+
+void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 msr)
+{
+	ulong old_msr = vcpu->arch.msr;
+
+#ifdef EXIT_DEBUG
+	printk(KERN_INFO "KVM: Set MSR to 0x%llx\n", msr);
+#endif
+	msr &= to_book3s(vcpu)->msr_mask;
+	vcpu->arch.msr = msr;
+	vcpu->arch.shadow_msr = msr | MSR_USER32;
+	vcpu->arch.shadow_msr &= ( MSR_VEC | MSR_VSX | MSR_FP | MSR_FE0 |
+				   MSR_USER64 | MSR_SE | MSR_BE | MSR_DE |
+				   MSR_FE1);
+
+	if (msr & (MSR_WE|MSR_POW)) {
+		if (!vcpu->arch.pending_exceptions) {
+			kvm_vcpu_block(vcpu);
+			vcpu->stat.halt_wakeup++;
+		}
+	}
+
+	if (((vcpu->arch.msr & (MSR_IR|MSR_DR)) != (old_msr & (MSR_IR|MSR_DR))) ||
+	    (vcpu->arch.msr & MSR_PR) != (old_msr & MSR_PR)) {
+		kvmppc_mmu_flush_segments(vcpu);
+		kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc);
+	}
+}
+
+void kvmppc_inject_interrupt(struct kvm_vcpu *vcpu, int vec, u64 flags)
+{
+	vcpu->arch.srr0 = vcpu->arch.pc;
+	vcpu->arch.srr1 = vcpu->arch.msr | flags;
+	vcpu->arch.pc = to_book3s(vcpu)->hior + vec;
+	vcpu->arch.mmu.reset_msr(vcpu);
+}
+
+void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec)
+{
+	unsigned int prio;
+
+	vcpu->stat.queue_intr++;
+	switch (vec) {
+	case 0x100: prio = BOOK3S_IRQPRIO_SYSTEM_RESET;		break;
+	case 0x200: prio = BOOK3S_IRQPRIO_MACHINE_CHECK;	break;
+	case 0x300: prio = BOOK3S_IRQPRIO_DATA_STORAGE;		break;
+	case 0x380: prio = BOOK3S_IRQPRIO_DATA_SEGMENT;		break;
+	case 0x400: prio = BOOK3S_IRQPRIO_INST_STORAGE;		break;
+	case 0x480: prio = BOOK3S_IRQPRIO_INST_SEGMENT;		break;
+	case 0x500: prio = BOOK3S_IRQPRIO_EXTERNAL;		break;
+	case 0x600: prio = BOOK3S_IRQPRIO_ALIGNMENT;		break;
+	case 0x700: prio = BOOK3S_IRQPRIO_PROGRAM;		break;
+	case 0x800: prio = BOOK3S_IRQPRIO_FP_UNAVAIL;		break;
+	case 0x900: prio = BOOK3S_IRQPRIO_DECREMENTER;		break;
+	case 0xc00: prio = BOOK3S_IRQPRIO_SYSCALL;		break;
+	case 0xd00: prio = BOOK3S_IRQPRIO_DEBUG;		break;
+	case 0xf20: prio = BOOK3S_IRQPRIO_ALTIVEC;		break;
+	case 0xf40: prio = BOOK3S_IRQPRIO_VSX;			break;
+	default:    prio = BOOK3S_IRQPRIO_MAX;			break;
+	}
+
+	set_bit(prio, &vcpu->arch.pending_exceptions);
+#ifdef EXIT_DEBUG
+	printk(KERN_INFO "Queueing interrupt %x\n", vec);
+#endif
+}
+
+
+void kvmppc_core_queue_program(struct kvm_vcpu *vcpu)
+{
+	kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_PROGRAM);
+}
+
+void kvmppc_core_queue_dec(struct kvm_vcpu *vcpu)
+{
+	kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_DECREMENTER);
+}
+
+int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu)
+{
+	return test_bit(BOOK3S_INTERRUPT_DECREMENTER >> 7, &vcpu->arch.pending_exceptions);
+}
+
+void kvmppc_core_queue_external(struct kvm_vcpu *vcpu,
+                                struct kvm_interrupt *irq)
+{
+	kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_EXTERNAL);
+}
+
+int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu, unsigned int priority)
+{
+	int deliver = 1;
+	int vec = 0;
+
+	switch (priority) {
+	case BOOK3S_IRQPRIO_DECREMENTER:
+		deliver = vcpu->arch.msr & MSR_EE;
+		vec = BOOK3S_INTERRUPT_DECREMENTER;
+		break;
+	case BOOK3S_IRQPRIO_EXTERNAL:
+		deliver = vcpu->arch.msr & MSR_EE;
+		vec = BOOK3S_INTERRUPT_EXTERNAL;
+		break;
+	case BOOK3S_IRQPRIO_SYSTEM_RESET:
+		vec = BOOK3S_INTERRUPT_SYSTEM_RESET;
+		break;
+	case BOOK3S_IRQPRIO_MACHINE_CHECK:
+		vec = BOOK3S_INTERRUPT_MACHINE_CHECK;
+		break;
+	case BOOK3S_IRQPRIO_DATA_STORAGE:
+		vec = BOOK3S_INTERRUPT_DATA_STORAGE;
+		break;
+	case BOOK3S_IRQPRIO_INST_STORAGE:
+		vec = BOOK3S_INTERRUPT_INST_STORAGE;
+		break;
+	case BOOK3S_IRQPRIO_DATA_SEGMENT:
+		vec = BOOK3S_INTERRUPT_DATA_SEGMENT;
+		break;
+	case BOOK3S_IRQPRIO_INST_SEGMENT:
+		vec = BOOK3S_INTERRUPT_INST_SEGMENT;
+		break;
+	case BOOK3S_IRQPRIO_ALIGNMENT:
+		vec = BOOK3S_INTERRUPT_ALIGNMENT;
+		break;
+	case BOOK3S_IRQPRIO_PROGRAM:
+		vec = BOOK3S_INTERRUPT_PROGRAM;
+		break;
+	case BOOK3S_IRQPRIO_VSX:
+		vec = BOOK3S_INTERRUPT_VSX;
+		break;
+	case BOOK3S_IRQPRIO_ALTIVEC:
+		vec = BOOK3S_INTERRUPT_ALTIVEC;
+		break;
+	case BOOK3S_IRQPRIO_FP_UNAVAIL:
+		vec = BOOK3S_INTERRUPT_FP_UNAVAIL;
+		break;
+	case BOOK3S_IRQPRIO_SYSCALL:
+		vec = BOOK3S_INTERRUPT_SYSCALL;
+		break;
+	case BOOK3S_IRQPRIO_DEBUG:
+		vec = BOOK3S_INTERRUPT_TRACE;
+		break;
+	case BOOK3S_IRQPRIO_PERFORMANCE_MONITOR:
+		vec = BOOK3S_INTERRUPT_PERFMON;
+		break;
+	default:
+		deliver = 0;
+		printk(KERN_ERR "KVM: Unknown interrupt: 0x%x\n", priority);
+		break;
+	}
+
+#if 0
+	printk(KERN_INFO "Deliver interrupt 0x%x? %x\n", vec, deliver);
+#endif
+
+	if (deliver)
+		kvmppc_inject_interrupt(vcpu, vec, 0ULL);
+
+	return deliver;
+}
+
+void kvmppc_core_deliver_interrupts(struct kvm_vcpu *vcpu)
+{
+	unsigned long *pending = &vcpu->arch.pending_exceptions;
+	unsigned int priority;
+
+	/* XXX be more clever here - no need to mftb() on every entry */
+	/* Issue DEC again if it's still active */
+#ifdef AGGRESSIVE_DEC
+	if (vcpu->arch.msr & MSR_EE)
+		if (kvmppc_get_dec(vcpu) & 0x80000000)
+			kvmppc_core_queue_dec(vcpu);
+#endif
+
+#ifdef EXIT_DEBUG
+	if (vcpu->arch.pending_exceptions)
+		printk(KERN_EMERG "KVM: Check pending: %lx\n", vcpu->arch.pending_exceptions);
+#endif
+	priority = __ffs(*pending);
+	while (priority <= (sizeof(unsigned int) * 8)) {
+		if (kvmppc_book3s_irqprio_deliver(vcpu, priority)) {
+			clear_bit(priority, &vcpu->arch.pending_exceptions);
+			break;
+		}
+
+		priority = find_next_bit(pending,
+					 BITS_PER_BYTE * sizeof(*pending),
+					 priority + 1);
+	}
+}
+
+void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
+{
+	vcpu->arch.hflags &= ~BOOK3S_HFLAG_SLB;
+	vcpu->arch.pvr = pvr;
+	if ((pvr >= 0x330000) && (pvr < 0x70330000)) {
+		kvmppc_mmu_book3s_64_init(vcpu);
+		to_book3s(vcpu)->hior = 0xfff00000;
+		to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL;
+	} else {
+		kvmppc_mmu_book3s_32_init(vcpu);
+		to_book3s(vcpu)->hior = 0;
+		to_book3s(vcpu)->msr_mask = 0xffffffffULL;
+	}
+
+	/* If we are in hypervisor level on 970, we can tell the CPU to
+	 * treat DCBZ as 32 bytes store */
+	vcpu->arch.hflags &= ~BOOK3S_HFLAG_DCBZ32;
+	if (vcpu->arch.mmu.is_dcbz32(vcpu) && (mfmsr() & MSR_HV) &&
+	    !strcmp(cur_cpu_spec->platform, "ppc970"))
+		vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
+
+}
+
+/* Book3s_32 CPUs always have 32 bytes cache line size, which Linux assumes. To
+ * make Book3s_32 Linux work on Book3s_64, we have to make sure we trap dcbz to
+ * emulate 32 bytes dcbz length.
+ *
+ * The Book3s_64 inventors also realized this case and implemented a special bit
+ * in the HID5 register, which is a hypervisor ressource. Thus we can't use it.
+ *
+ * My approach here is to patch the dcbz instruction on executing pages.
+ */
+static void kvmppc_patch_dcbz(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte)
+{
+	bool touched = false;
+	hva_t hpage;
+	u32 *page;
+	int i;
+
+	hpage = gfn_to_hva(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
+	if (kvm_is_error_hva(hpage))
+		return;
+
+	hpage |= pte->raddr & ~PAGE_MASK;
+	hpage &= ~0xFFFULL;
+
+	page = vmalloc(HW_PAGE_SIZE);
+
+	if (copy_from_user(page, (void __user *)hpage, HW_PAGE_SIZE))
+		goto out;
+
+	for (i=0; i < HW_PAGE_SIZE / 4; i++)
+		if ((page[i] & 0xff0007ff) == INS_DCBZ) {
+			page[i] &= 0xfffffff7; // reserved instruction, so we trap
+			touched = true;
+		}
+
+	if (touched)
+		copy_to_user((void __user *)hpage, page, HW_PAGE_SIZE);
+
+out:
+	vfree(page);
+}
+
+static int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr, bool data,
+			 struct kvmppc_pte *pte)
+{
+	int relocated = (vcpu->arch.msr & (data ? MSR_DR : MSR_IR));
+	int r;
+
+	if (relocated) {
+		r = vcpu->arch.mmu.xlate(vcpu, eaddr, pte, data);
+	} else {
+		pte->eaddr = eaddr;
+		pte->raddr = eaddr & 0xffffffff;
+		pte->vpage = eaddr >> 12;
+		switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+		case 0:
+			pte->vpage |= VSID_REAL;
+		case MSR_DR:
+			pte->vpage |= VSID_REAL_DR;
+		case MSR_IR:
+			pte->vpage |= VSID_REAL_IR;
+		}
+		pte->may_read = true;
+		pte->may_write = true;
+		pte->may_execute = true;
+		r = 0;
+	}
+
+	return r;
+}
+
+static hva_t kvmppc_bad_hva(void)
+{
+	return PAGE_OFFSET;
+}
+
+static hva_t kvmppc_pte_to_hva(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte,
+			       bool read)
+{
+	hva_t hpage;
+
+	if (read && !pte->may_read)
+		goto err;
+
+	if (!read && !pte->may_write)
+		goto err;
+
+	hpage = gfn_to_hva(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
+	if (kvm_is_error_hva(hpage))
+		goto err;
+
+	return hpage | (pte->raddr & ~PAGE_MASK);
+err:
+	return kvmppc_bad_hva();
+}
+
+int kvmppc_st(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr)
+{
+	struct kvmppc_pte pte;
+	hva_t hva = eaddr;
+
+	vcpu->stat.st++;
+
+	if (kvmppc_xlate(vcpu, eaddr, false, &pte))
+		goto err;
+
+	hva = kvmppc_pte_to_hva(vcpu, &pte, false);
+	if (kvm_is_error_hva(hva))
+		goto err;
+
+	if (copy_to_user((void __user *)hva, ptr, size)) {
+		printk(KERN_INFO "kvmppc_st at 0x%lx failed\n", hva);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	return -ENOENT;
+}
+
+int kvmppc_ld(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr,
+		      bool data)
+{
+	struct kvmppc_pte pte;
+	hva_t hva = eaddr;
+
+	vcpu->stat.ld++;
+
+	if (kvmppc_xlate(vcpu, eaddr, data, &pte))
+		goto err;
+
+	hva = kvmppc_pte_to_hva(vcpu, &pte, true);
+	if (kvm_is_error_hva(hva))
+		goto err;
+
+	if (copy_from_user(ptr, (void __user *)hva, size)) {
+		printk(KERN_INFO "kvmppc_ld at 0x%lx failed\n", hva);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	return -ENOENT;
+}
+
+static int kvmppc_visible_gfn(struct kvm_vcpu *vcpu, gfn_t gfn)
+{
+	return kvm_is_visible_gfn(vcpu->kvm, gfn);
+}
+
+int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
+			    ulong eaddr, int vec)
+{
+	bool data = (vec == BOOK3S_INTERRUPT_DATA_STORAGE);
+	int r = RESUME_GUEST;
+	int relocated;
+	int page_found = 0;
+	struct kvmppc_pte pte;
+	bool is_mmio = false;
+
+	if ( vec == BOOK3S_INTERRUPT_DATA_STORAGE ) {
+		relocated = (vcpu->arch.msr & MSR_DR);
+	} else {
+		relocated = (vcpu->arch.msr & MSR_IR);
+	}
+
+	/* Resolve real address if translation turned on */
+	if (relocated) {
+		page_found = vcpu->arch.mmu.xlate(vcpu, eaddr, &pte, data);
+	} else {
+		pte.may_execute = true;
+		pte.may_read = true;
+		pte.may_write = true;
+		pte.raddr = eaddr & 0xffffffff;
+		pte.eaddr = eaddr;
+		pte.vpage = eaddr >> 12;
+		switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+		case 0:
+			pte.vpage |= VSID_REAL;
+		case MSR_DR:
+			pte.vpage |= VSID_REAL_DR;
+		case MSR_IR:
+			pte.vpage |= VSID_REAL_IR;
+		}
+	}
+
+	if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+	   (!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32))) {
+		/*
+		 * If we do the dcbz hack, we have to NX on every execution,
+		 * so we can patch the executing code. This renders our guest
+		 * NX-less.
+		 */
+		pte.may_execute = !data;
+	}
+
+	if (page_found == -ENOENT) {
+		/* Page not found in guest PTE entries */
+		vcpu->arch.dear = vcpu->arch.fault_dear;
+		to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr;
+		vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x00000000f8000000ULL);
+		kvmppc_book3s_queue_irqprio(vcpu, vec);
+	} else if (page_found == -EPERM) {
+		/* Storage protection */
+		vcpu->arch.dear = vcpu->arch.fault_dear;
+		to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr & ~DSISR_NOHPTE;
+		to_book3s(vcpu)->dsisr |= DSISR_PROTFAULT;
+		vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x00000000f8000000ULL);
+		kvmppc_book3s_queue_irqprio(vcpu, vec);
+	} else if (page_found == -EINVAL) {
+		/* Page not found in guest SLB */
+		vcpu->arch.dear = vcpu->arch.fault_dear;
+		kvmppc_book3s_queue_irqprio(vcpu, vec + 0x80);
+	} else if (!is_mmio &&
+		   kvmppc_visible_gfn(vcpu, pte.raddr >> PAGE_SHIFT)) {
+		/* The guest's PTE is not mapped yet. Map on the host */
+		kvmppc_mmu_map_page(vcpu, &pte);
+		if (data)
+			vcpu->stat.sp_storage++;
+		else if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+			(!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32)))
+			kvmppc_patch_dcbz(vcpu, &pte);
+	} else {
+		/* MMIO */
+		vcpu->stat.mmio_exits++;
+		vcpu->arch.paddr_accessed = pte.raddr;
+		r = kvmppc_emulate_mmio(run, vcpu);
+		if ( r == RESUME_HOST_NV )
+			r = RESUME_HOST;
+		if ( r == RESUME_GUEST_NV )
+			r = RESUME_GUEST;
+	}
+
+	return r;
+}
+
+int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                       unsigned int exit_nr)
+{
+	int r = RESUME_HOST;
+
+	vcpu->stat.sum_exits++;
+
+	run->exit_reason = KVM_EXIT_UNKNOWN;
+	run->ready_for_interrupt_injection = 1;
+#ifdef EXIT_DEBUG
+	printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | dar=0x%lx | dec=0x%x | msr=0x%lx\n",
+		exit_nr, vcpu->arch.pc, vcpu->arch.fault_dear,
+		kvmppc_get_dec(vcpu), vcpu->arch.msr);
+#elif defined (EXIT_DEBUG_SIMPLE)
+	if ((exit_nr != 0x900) && (exit_nr != 0x500))
+		printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | dar=0x%lx | msr=0x%lx\n",
+			exit_nr, vcpu->arch.pc, vcpu->arch.fault_dear,
+			vcpu->arch.msr);
+#endif
+	kvm_resched(vcpu);
+	switch (exit_nr) {
+	case BOOK3S_INTERRUPT_INST_STORAGE:
+		vcpu->stat.pf_instruc++;
+		/* only care about PTEG not found errors, but leave NX alone */
+		if (vcpu->arch.shadow_msr & 0x40000000) {
+			r = kvmppc_handle_pagefault(run, vcpu, vcpu->arch.pc, exit_nr);
+			vcpu->stat.sp_instruc++;
+		} else if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+			  (!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32))) {
+			/*
+			 * XXX If we do the dcbz hack we use the NX bit to flush&patch the page,
+			 *     so we can't use the NX bit inside the guest. Let's cross our fingers,
+			 *     that no guest that needs the dcbz hack does NX.
+			 */
+			kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL);
+		} else {
+			vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x58000000);
+			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+			kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL);
+			r = RESUME_GUEST;
+		}
+		break;
+	case BOOK3S_INTERRUPT_DATA_STORAGE:
+		vcpu->stat.pf_storage++;
+		/* The only case we need to handle is missing shadow PTEs */
+		if (vcpu->arch.fault_dsisr & DSISR_NOHPTE) {
+			r = kvmppc_handle_pagefault(run, vcpu, vcpu->arch.fault_dear, exit_nr);
+		} else {
+			vcpu->arch.dear = vcpu->arch.fault_dear;
+			to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr;
+			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+			kvmppc_mmu_pte_flush(vcpu, vcpu->arch.dear, ~0xFFFULL);
+			r = RESUME_GUEST;
+		}
+		break;
+	case BOOK3S_INTERRUPT_DATA_SEGMENT:
+		if (kvmppc_mmu_map_segment(vcpu, vcpu->arch.fault_dear) < 0) {
+			vcpu->arch.dear = vcpu->arch.fault_dear;
+			kvmppc_book3s_queue_irqprio(vcpu,
+				BOOK3S_INTERRUPT_DATA_SEGMENT);
+		}
+		r = RESUME_GUEST;
+		break;
+	case BOOK3S_INTERRUPT_INST_SEGMENT:
+		if (kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc) < 0) {
+			kvmppc_book3s_queue_irqprio(vcpu,
+				BOOK3S_INTERRUPT_INST_SEGMENT);
+		}
+		r = RESUME_GUEST;
+		break;
+	/* We're good on these - the host merely wanted to get our attention */
+	case BOOK3S_INTERRUPT_DECREMENTER:
+		vcpu->stat.dec_exits++;
+		r = RESUME_GUEST;
+		break;
+	case BOOK3S_INTERRUPT_EXTERNAL:
+		vcpu->stat.ext_intr_exits++;
+		r = RESUME_GUEST;
+		break;
+	case BOOK3S_INTERRUPT_PROGRAM:
+	{
+		enum emulation_result er;
+
+		if (vcpu->arch.msr & MSR_PR) {
+#ifdef EXIT_DEBUG
+			printk(KERN_INFO "Userspace triggered 0x700 exception at 0x%lx (0x%x)\n", vcpu->arch.pc, vcpu->arch.last_inst);
+#endif
+			if ((vcpu->arch.last_inst & 0xff0007ff) !=
+			    (INS_DCBZ & 0xfffffff7)) {
+				kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+				r = RESUME_GUEST;
+				break;
+			}
+		}
+
+		vcpu->stat.emulated_inst_exits++;
+		er = kvmppc_emulate_instruction(run, vcpu);
+		switch (er) {
+		case EMULATE_DONE:
+			r = RESUME_GUEST;
+			break;
+		case EMULATE_FAIL:
+			printk(KERN_CRIT "%s: emulation at %lx failed (%08x)\n",
+			       __func__, vcpu->arch.pc, vcpu->arch.last_inst);
+			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+			r = RESUME_GUEST;
+			break;
+		default:
+			BUG();
+		}
+		break;
+	}
+	case BOOK3S_INTERRUPT_SYSCALL:
+#ifdef EXIT_DEBUG
+		printk(KERN_INFO "Syscall Nr %d\n", (int)vcpu->arch.gpr[0]);
+#endif
+		vcpu->stat.syscall_exits++;
+		kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+		r = RESUME_GUEST;
+		break;
+	case BOOK3S_INTERRUPT_MACHINE_CHECK:
+	case BOOK3S_INTERRUPT_FP_UNAVAIL:
+	case BOOK3S_INTERRUPT_TRACE:
+	case BOOK3S_INTERRUPT_ALTIVEC:
+	case BOOK3S_INTERRUPT_VSX:
+		kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+		r = RESUME_GUEST;
+		break;
+	default:
+		/* Ugh - bork here! What did we get? */
+		printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | msr=0x%lx\n", exit_nr, vcpu->arch.pc, vcpu->arch.shadow_msr);
+		r = RESUME_HOST;
+		BUG();
+		break;
+	}
+
+
+	if (!(r & RESUME_HOST)) {
+		/* To avoid clobbering exit_reason, only check for signals if
+		 * we aren't already exiting to userspace for some other
+		 * reason. */
+		if (signal_pending(current)) {
+#ifdef EXIT_DEBUG
+			printk(KERN_EMERG "KVM: Going back to host\n");
+#endif
+			vcpu->stat.signal_exits++;
+			run->exit_reason = KVM_EXIT_INTR;
+			r = -EINTR;
+		} else {
+			/* In case an interrupt came in that was triggered
+			 * from userspace (like DEC), we need to check what
+			 * to inject now! */
+			kvmppc_core_deliver_interrupts(vcpu);
+		}
+	}
+
+#ifdef EXIT_DEBUG
+	printk(KERN_EMERG "KVM exit: vcpu=0x%p pc=0x%lx r=0x%x\n", vcpu, vcpu->arch.pc, r);
+#endif
+
+	return r;
+}
+
+int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
+{
+	return 0;
+}
+
+int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
+{
+	int i;
+
+	regs->pc = vcpu->arch.pc;
+	regs->cr = vcpu->arch.cr;
+	regs->ctr = vcpu->arch.ctr;
+	regs->lr = vcpu->arch.lr;
+	regs->xer = vcpu->arch.xer;
+	regs->msr = vcpu->arch.msr;
+	regs->srr0 = vcpu->arch.srr0;
+	regs->srr1 = vcpu->arch.srr1;
+	regs->pid = vcpu->arch.pid;
+	regs->sprg0 = vcpu->arch.sprg0;
+	regs->sprg1 = vcpu->arch.sprg1;
+	regs->sprg2 = vcpu->arch.sprg2;
+	regs->sprg3 = vcpu->arch.sprg3;
+	regs->sprg5 = vcpu->arch.sprg4;
+	regs->sprg6 = vcpu->arch.sprg5;
+	regs->sprg7 = vcpu->arch.sprg6;
+
+	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
+		regs->gpr[i] = vcpu->arch.gpr[i];
+
+	return 0;
+}
+
+int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
+{
+	int i;
+
+	vcpu->arch.pc = regs->pc;
+	vcpu->arch.cr = regs->cr;
+	vcpu->arch.ctr = regs->ctr;
+	vcpu->arch.lr = regs->lr;
+	vcpu->arch.xer = regs->xer;
+	kvmppc_set_msr(vcpu, regs->msr);
+	vcpu->arch.srr0 = regs->srr0;
+	vcpu->arch.srr1 = regs->srr1;
+	vcpu->arch.sprg0 = regs->sprg0;
+	vcpu->arch.sprg1 = regs->sprg1;
+	vcpu->arch.sprg2 = regs->sprg2;
+	vcpu->arch.sprg3 = regs->sprg3;
+	vcpu->arch.sprg5 = regs->sprg4;
+	vcpu->arch.sprg6 = regs->sprg5;
+	vcpu->arch.sprg7 = regs->sprg6;
+
+	for (i = 0; i < ARRAY_SIZE(vcpu->arch.gpr); i++)
+		vcpu->arch.gpr[i] = regs->gpr[i];
+
+	return 0;
+}
+
+int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
+                                  struct kvm_sregs *sregs)
+{
+	struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
+	int i;
+
+	sregs->pvr = vcpu->arch.pvr;
+
+	sregs->u.s.sdr1 = to_book3s(vcpu)->sdr1;
+	if (vcpu->arch.hflags & BOOK3S_HFLAG_SLB) {
+		for (i = 0; i < 64; i++) {
+			sregs->u.s.ppc64.slb[i].slbe = vcpu3s->slb[i].orige | i;
+			sregs->u.s.ppc64.slb[i].slbv = vcpu3s->slb[i].origv;
+		}
+	} else {
+		for (i = 0; i < 16; i++) {
+			sregs->u.s.ppc32.sr[i] = vcpu3s->sr[i].raw;
+			sregs->u.s.ppc32.sr[i] = vcpu3s->sr[i].raw;
+		}
+		for (i = 0; i < 8; i++) {
+			sregs->u.s.ppc32.ibat[i] = vcpu3s->ibat[i].raw;
+			sregs->u.s.ppc32.dbat[i] = vcpu3s->dbat[i].raw;
+		}
+	}
+	return 0;
+}
+
+int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
+                                  struct kvm_sregs *sregs)
+{
+	struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
+	int i;
+
+	kvmppc_set_pvr(vcpu, sregs->pvr);
+
+	vcpu3s->sdr1 = sregs->u.s.sdr1;
+	if (vcpu->arch.hflags & BOOK3S_HFLAG_SLB) {
+		for (i = 0; i < 64; i++) {
+			vcpu->arch.mmu.slbmte(vcpu, sregs->u.s.ppc64.slb[i].slbv,
+						    sregs->u.s.ppc64.slb[i].slbe);
+		}
+	} else {
+		for (i = 0; i < 16; i++) {
+			vcpu->arch.mmu.mtsrin(vcpu, i, sregs->u.s.ppc32.sr[i]);
+		}
+		for (i = 0; i < 8; i++) {
+			kvmppc_set_bat(vcpu, &(vcpu3s->ibat[i]), false,
+				       (u32)sregs->u.s.ppc32.ibat[i]);
+			kvmppc_set_bat(vcpu, &(vcpu3s->ibat[i]), true,
+				       (u32)(sregs->u.s.ppc32.ibat[i] >> 32));
+			kvmppc_set_bat(vcpu, &(vcpu3s->dbat[i]), false,
+				       (u32)sregs->u.s.ppc32.dbat[i]);
+			kvmppc_set_bat(vcpu, &(vcpu3s->dbat[i]), true,
+				       (u32)(sregs->u.s.ppc32.dbat[i] >> 32));
+		}
+	}
+
+	/* Flush the MMU after messing with the segments */
+	kvmppc_mmu_pte_flush(vcpu, 0, 0);
+	return 0;
+}
+
+int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
+{
+	return -ENOTSUPP;
+}
+
+int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
+{
+	return -ENOTSUPP;
+}
+
+int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
+                                  struct kvm_translation *tr)
+{
+	return 0;
+}
+
+/*
+ * Get (and clear) the dirty memory log for a memory slot.
+ */
+int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
+				      struct kvm_dirty_log *log)
+{
+	struct kvm_memory_slot *memslot;
+	struct kvm_vcpu *vcpu;
+	ulong ga, ga_end;
+	int is_dirty = 0;
+	int r, n;
+
+	down_write(&kvm->slots_lock);
+
+	r = kvm_get_dirty_log(kvm, log, &is_dirty);
+	if (r)
+		goto out;
+
+	/* If nothing is dirty, don't bother messing with page tables. */
+	if (is_dirty) {
+		memslot = &kvm->memslots[log->slot];
+
+		ga = memslot->base_gfn << PAGE_SHIFT;
+		ga_end = ga + (memslot->npages << PAGE_SHIFT);
+
+		kvm_for_each_vcpu(n, vcpu, kvm)
+			kvmppc_mmu_pte_pflush(vcpu, ga, ga_end);
+
+		n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+		memset(memslot->dirty_bitmap, 0, n);
+	}
+
+	r = 0;
+out:
+	up_write(&kvm->slots_lock);
+	return r;
+}
+
+int kvmppc_core_check_processor_compat(void)
+{
+	return 0;
+}
+
+struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm, unsigned int id)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s;
+	struct kvm_vcpu *vcpu;
+	int err;
+
+	vcpu_book3s = (struct kvmppc_vcpu_book3s *)__get_free_pages( GFP_KERNEL | __GFP_ZERO,
+			get_order(sizeof(struct kvmppc_vcpu_book3s)));
+	if (!vcpu_book3s) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	vcpu = &vcpu_book3s->vcpu;
+	err = kvm_vcpu_init(vcpu, kvm, id);
+	if (err)
+		goto free_vcpu;
+
+	vcpu->arch.host_retip = kvm_return_point;
+	vcpu->arch.host_msr = mfmsr();
+	/* default to book3s_64 (970fx) */
+	vcpu->arch.pvr = 0x3C0301;
+	kvmppc_set_pvr(vcpu, vcpu->arch.pvr);
+	vcpu_book3s->slb_nr = 64;
+
+	/* remember where some real-mode handlers are */
+	vcpu->arch.trampoline_lowmem = kvmppc_trampoline_lowmem;
+	vcpu->arch.trampoline_enter = kvmppc_trampoline_enter;
+	vcpu->arch.highmem_handler = (ulong)kvmppc_handler_highmem;
+
+	vcpu->arch.shadow_msr = MSR_USER64;
+
+	err = __init_new_context();
+	if (err < 0)
+		goto free_vcpu;
+	vcpu_book3s->context_id = err;
+
+	vcpu_book3s->vsid_max = ((vcpu_book3s->context_id + 1) << USER_ESID_BITS) - 1;
+	vcpu_book3s->vsid_first = vcpu_book3s->context_id << USER_ESID_BITS;
+	vcpu_book3s->vsid_next = vcpu_book3s->vsid_first;
+
+	return vcpu;
+
+free_vcpu:
+	free_pages((long)vcpu_book3s, get_order(sizeof(struct kvmppc_vcpu_book3s)));
+out:
+	return ERR_PTR(err);
+}
+
+void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+
+	__destroy_context(vcpu_book3s->context_id);
+	kvm_vcpu_uninit(vcpu);
+	free_pages((long)vcpu_book3s, get_order(sizeof(struct kvmppc_vcpu_book3s)));
+}
+
+extern int __kvmppc_vcpu_entry(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
+int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
+{
+	int ret;
+
+	/* No need to go into the guest when all we do is going out */
+	if (signal_pending(current)) {
+		kvm_run->exit_reason = KVM_EXIT_INTR;
+		return -EINTR;
+	}
+
+	/* XXX we get called with irq disabled - change that! */
+	local_irq_enable();
+
+	ret = __kvmppc_vcpu_entry(kvm_run, vcpu);
+
+	local_irq_disable();
+
+	return ret;
+}
+
+static int kvmppc_book3s_init(void)
+{
+	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_book3s), THIS_MODULE);
+}
+
+static void kvmppc_book3s_exit(void)
+{
+	kvm_exit();
+}
+
+module_init(kvmppc_book3s_init);
+module_exit(kvmppc_book3s_exit);
diff --git a/arch/powerpc/kvm/book3s_32_mmu.c b/arch/powerpc/kvm/book3s_32_mmu.c
new file mode 100644
index 000000000000..faf99f20d993
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_32_mmu.c
@@ -0,0 +1,372 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/highmem.h>
+
+#include <asm/tlbflush.h>
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+
+/* #define DEBUG_MMU */
+/* #define DEBUG_MMU_PTE */
+/* #define DEBUG_MMU_PTE_IP 0xfff14c40 */
+
+#ifdef DEBUG_MMU
+#define dprintk(X...) printk(KERN_INFO X)
+#else
+#define dprintk(X...) do { } while(0)
+#endif
+
+#ifdef DEBUG_PTE
+#define dprintk_pte(X...) printk(KERN_INFO X)
+#else
+#define dprintk_pte(X...) do { } while(0)
+#endif
+
+#define PTEG_FLAG_ACCESSED	0x00000100
+#define PTEG_FLAG_DIRTY		0x00000080
+
+static inline bool check_debug_ip(struct kvm_vcpu *vcpu)
+{
+#ifdef DEBUG_MMU_PTE_IP
+	return vcpu->arch.pc == DEBUG_MMU_PTE_IP;
+#else
+	return true;
+#endif
+}
+
+static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr,
+					  struct kvmppc_pte *pte, bool data);
+
+static struct kvmppc_sr *find_sr(struct kvmppc_vcpu_book3s *vcpu_book3s, gva_t eaddr)
+{
+	return &vcpu_book3s->sr[(eaddr >> 28) & 0xf];
+}
+
+static u64 kvmppc_mmu_book3s_32_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr,
+					 bool data)
+{
+	struct kvmppc_sr *sre = find_sr(to_book3s(vcpu), eaddr);
+	struct kvmppc_pte pte;
+
+	if (!kvmppc_mmu_book3s_32_xlate_bat(vcpu, eaddr, &pte, data))
+		return pte.vpage;
+
+	return (((u64)eaddr >> 12) & 0xffff) | (((u64)sre->vsid) << 16);
+}
+
+static void kvmppc_mmu_book3s_32_reset_msr(struct kvm_vcpu *vcpu)
+{
+	kvmppc_set_msr(vcpu, 0);
+}
+
+static hva_t kvmppc_mmu_book3s_32_get_pteg(struct kvmppc_vcpu_book3s *vcpu_book3s,
+				      struct kvmppc_sr *sre, gva_t eaddr,
+				      bool primary)
+{
+	u32 page, hash, pteg, htabmask;
+	hva_t r;
+
+	page = (eaddr & 0x0FFFFFFF) >> 12;
+	htabmask = ((vcpu_book3s->sdr1 & 0x1FF) << 16) | 0xFFC0;
+
+	hash = ((sre->vsid ^ page) << 6);
+	if (!primary)
+		hash = ~hash;
+	hash &= htabmask;
+
+	pteg = (vcpu_book3s->sdr1 & 0xffff0000) | hash;
+
+	dprintk("MMU: pc=0x%lx eaddr=0x%lx sdr1=0x%llx pteg=0x%x vsid=0x%x\n",
+		vcpu_book3s->vcpu.arch.pc, eaddr, vcpu_book3s->sdr1, pteg,
+		sre->vsid);
+
+	r = gfn_to_hva(vcpu_book3s->vcpu.kvm, pteg >> PAGE_SHIFT);
+	if (kvm_is_error_hva(r))
+		return r;
+	return r | (pteg & ~PAGE_MASK);
+}
+
+static u32 kvmppc_mmu_book3s_32_get_ptem(struct kvmppc_sr *sre, gva_t eaddr,
+				    bool primary)
+{
+	return ((eaddr & 0x0fffffff) >> 22) | (sre->vsid << 7) |
+	       (primary ? 0 : 0x40) | 0x80000000;
+}
+
+static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr,
+					  struct kvmppc_pte *pte, bool data)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	struct kvmppc_bat *bat;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		if (data)
+			bat = &vcpu_book3s->dbat[i];
+		else
+			bat = &vcpu_book3s->ibat[i];
+
+		if (vcpu->arch.msr & MSR_PR) {
+			if (!bat->vp)
+				continue;
+		} else {
+			if (!bat->vs)
+				continue;
+		}
+
+		if (check_debug_ip(vcpu))
+		{
+			dprintk_pte("%cBAT %02d: 0x%lx - 0x%x (0x%x)\n",
+				    data ? 'd' : 'i', i, eaddr, bat->bepi,
+				    bat->bepi_mask);
+		}
+		if ((eaddr & bat->bepi_mask) == bat->bepi) {
+			pte->raddr = bat->brpn | (eaddr & ~bat->bepi_mask);
+			pte->vpage = (eaddr >> 12) | VSID_BAT;
+			pte->may_read = bat->pp;
+			pte->may_write = bat->pp > 1;
+			pte->may_execute = true;
+			if (!pte->may_read) {
+				printk(KERN_INFO "BAT is not readable!\n");
+				continue;
+			}
+			if (!pte->may_write) {
+				/* let's treat r/o BATs as not-readable for now */
+				dprintk_pte("BAT is read-only!\n");
+				continue;
+			}
+
+			return 0;
+		}
+	}
+
+	return -ENOENT;
+}
+
+static int kvmppc_mmu_book3s_32_xlate_pte(struct kvm_vcpu *vcpu, gva_t eaddr,
+				     struct kvmppc_pte *pte, bool data,
+				     bool primary)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	struct kvmppc_sr *sre;
+	hva_t ptegp;
+	u32 pteg[16];
+	u64 ptem = 0;
+	int i;
+	int found = 0;
+
+	sre = find_sr(vcpu_book3s, eaddr);
+
+	dprintk_pte("SR 0x%lx: vsid=0x%x, raw=0x%x\n", eaddr >> 28,
+		    sre->vsid, sre->raw);
+
+	pte->vpage = kvmppc_mmu_book3s_32_ea_to_vp(vcpu, eaddr, data);
+
+	ptegp = kvmppc_mmu_book3s_32_get_pteg(vcpu_book3s, sre, eaddr, primary);
+	if (kvm_is_error_hva(ptegp)) {
+		printk(KERN_INFO "KVM: Invalid PTEG!\n");
+		goto no_page_found;
+	}
+
+	ptem = kvmppc_mmu_book3s_32_get_ptem(sre, eaddr, primary);
+
+	if(copy_from_user(pteg, (void __user *)ptegp, sizeof(pteg))) {
+		printk(KERN_ERR "KVM: Can't copy data from 0x%lx!\n", ptegp);
+		goto no_page_found;
+	}
+
+	for (i=0; i<16; i+=2) {
+		if (ptem == pteg[i]) {
+			u8 pp;
+
+			pte->raddr = (pteg[i+1] & ~(0xFFFULL)) | (eaddr & 0xFFF);
+			pp = pteg[i+1] & 3;
+
+			if ((sre->Kp &&  (vcpu->arch.msr & MSR_PR)) ||
+			    (sre->Ks && !(vcpu->arch.msr & MSR_PR)))
+				pp |= 4;
+
+			pte->may_write = false;
+			pte->may_read = false;
+			pte->may_execute = true;
+			switch (pp) {
+				case 0:
+				case 1:
+				case 2:
+				case 6:
+					pte->may_write = true;
+				case 3:
+				case 5:
+				case 7:
+					pte->may_read = true;
+					break;
+			}
+
+			if ( !pte->may_read )
+				continue;
+
+			dprintk_pte("MMU: Found PTE -> %x %x - %x\n",
+				    pteg[i], pteg[i+1], pp);
+			found = 1;
+			break;
+		}
+	}
+
+	/* Update PTE C and A bits, so the guest's swapper knows we used the
+	   page */
+	if (found) {
+		u32 oldpte = pteg[i+1];
+
+		if (pte->may_read)
+			pteg[i+1] |= PTEG_FLAG_ACCESSED;
+		if (pte->may_write)
+			pteg[i+1] |= PTEG_FLAG_DIRTY;
+		else
+			dprintk_pte("KVM: Mapping read-only page!\n");
+
+		/* Write back into the PTEG */
+		if (pteg[i+1] != oldpte)
+			copy_to_user((void __user *)ptegp, pteg, sizeof(pteg));
+
+		return 0;
+	}
+
+no_page_found:
+
+	if (check_debug_ip(vcpu)) {
+		dprintk_pte("KVM MMU: No PTE found (sdr1=0x%llx ptegp=0x%lx)\n",
+			    to_book3s(vcpu)->sdr1, ptegp);
+		for (i=0; i<16; i+=2) {
+			dprintk_pte("   %02d: 0x%x - 0x%x (0x%llx)\n",
+				    i, pteg[i], pteg[i+1], ptem);
+		}
+	}
+
+	return -ENOENT;
+}
+
+static int kvmppc_mmu_book3s_32_xlate(struct kvm_vcpu *vcpu, gva_t eaddr,
+				      struct kvmppc_pte *pte, bool data)
+{
+	int r;
+
+	pte->eaddr = eaddr;
+	r = kvmppc_mmu_book3s_32_xlate_bat(vcpu, eaddr, pte, data);
+	if (r < 0)
+	       r = kvmppc_mmu_book3s_32_xlate_pte(vcpu, eaddr, pte, data, true);
+	if (r < 0)
+	       r = kvmppc_mmu_book3s_32_xlate_pte(vcpu, eaddr, pte, data, false);
+
+	return r;
+}
+
+
+static u32 kvmppc_mmu_book3s_32_mfsrin(struct kvm_vcpu *vcpu, u32 srnum)
+{
+	return to_book3s(vcpu)->sr[srnum].raw;
+}
+
+static void kvmppc_mmu_book3s_32_mtsrin(struct kvm_vcpu *vcpu, u32 srnum,
+					ulong value)
+{
+	struct kvmppc_sr *sre;
+
+	sre = &to_book3s(vcpu)->sr[srnum];
+
+	/* Flush any left-over shadows from the previous SR */
+
+	/* XXX Not necessary? */
+	/* kvmppc_mmu_pte_flush(vcpu, ((u64)sre->vsid) << 28, 0xf0000000ULL); */
+
+	/* And then put in the new SR */
+	sre->raw = value;
+	sre->vsid = (value & 0x0fffffff);
+	sre->Ks = (value & 0x40000000) ? true : false;
+	sre->Kp = (value & 0x20000000) ? true : false;
+	sre->nx = (value & 0x10000000) ? true : false;
+
+	/* Map the new segment */
+	kvmppc_mmu_map_segment(vcpu, srnum << SID_SHIFT);
+}
+
+static void kvmppc_mmu_book3s_32_tlbie(struct kvm_vcpu *vcpu, ulong ea, bool large)
+{
+	kvmppc_mmu_pte_flush(vcpu, ea, ~0xFFFULL);
+}
+
+static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
+					     u64 *vsid)
+{
+	/* In case we only have one of MSR_IR or MSR_DR set, let's put
+	   that in the real-mode context (and hope RM doesn't access
+	   high memory) */
+	switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+	case 0:
+		*vsid = (VSID_REAL >> 16) | esid;
+		break;
+	case MSR_IR:
+		*vsid = (VSID_REAL_IR >> 16) | esid;
+		break;
+	case MSR_DR:
+		*vsid = (VSID_REAL_DR >> 16) | esid;
+		break;
+	case MSR_DR|MSR_IR:
+	{
+		ulong ea;
+		ea = esid << SID_SHIFT;
+		*vsid = find_sr(to_book3s(vcpu), ea)->vsid;
+		break;
+	}
+	default:
+		BUG();
+	}
+
+	return 0;
+}
+
+static bool kvmppc_mmu_book3s_32_is_dcbz32(struct kvm_vcpu *vcpu)
+{
+	return true;
+}
+
+
+void kvmppc_mmu_book3s_32_init(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_mmu *mmu = &vcpu->arch.mmu;
+
+	mmu->mtsrin = kvmppc_mmu_book3s_32_mtsrin;
+	mmu->mfsrin = kvmppc_mmu_book3s_32_mfsrin;
+	mmu->xlate = kvmppc_mmu_book3s_32_xlate;
+	mmu->reset_msr = kvmppc_mmu_book3s_32_reset_msr;
+	mmu->tlbie = kvmppc_mmu_book3s_32_tlbie;
+	mmu->esid_to_vsid = kvmppc_mmu_book3s_32_esid_to_vsid;
+	mmu->ea_to_vp = kvmppc_mmu_book3s_32_ea_to_vp;
+	mmu->is_dcbz32 = kvmppc_mmu_book3s_32_is_dcbz32;
+
+	mmu->slbmte = NULL;
+	mmu->slbmfee = NULL;
+	mmu->slbmfev = NULL;
+	mmu->slbie = NULL;
+	mmu->slbia = NULL;
+}
diff --git a/arch/powerpc/kvm/book3s_64_emulate.c b/arch/powerpc/kvm/book3s_64_emulate.c
new file mode 100644
index 000000000000..1027eac6d474
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_64_emulate.c
@@ -0,0 +1,345 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/kvm_ppc.h>
+#include <asm/disassemble.h>
+#include <asm/kvm_book3s.h>
+#include <asm/reg.h>
+
+#define OP_19_XOP_RFID		18
+#define OP_19_XOP_RFI		50
+
+#define OP_31_XOP_MFMSR		83
+#define OP_31_XOP_MTMSR		146
+#define OP_31_XOP_MTMSRD	178
+#define OP_31_XOP_MTSRIN	242
+#define OP_31_XOP_TLBIEL	274
+#define OP_31_XOP_TLBIE		306
+#define OP_31_XOP_SLBMTE	402
+#define OP_31_XOP_SLBIE		434
+#define OP_31_XOP_SLBIA		498
+#define OP_31_XOP_MFSRIN	659
+#define OP_31_XOP_SLBMFEV	851
+#define OP_31_XOP_EIOIO		854
+#define OP_31_XOP_SLBMFEE	915
+
+/* DCBZ is actually 1014, but we patch it to 1010 so we get a trap */
+#define OP_31_XOP_DCBZ		1010
+
+int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                           unsigned int inst, int *advance)
+{
+	int emulated = EMULATE_DONE;
+
+	switch (get_op(inst)) {
+	case 19:
+		switch (get_xop(inst)) {
+		case OP_19_XOP_RFID:
+		case OP_19_XOP_RFI:
+			vcpu->arch.pc = vcpu->arch.srr0;
+			kvmppc_set_msr(vcpu, vcpu->arch.srr1);
+			*advance = 0;
+			break;
+
+		default:
+			emulated = EMULATE_FAIL;
+			break;
+		}
+		break;
+	case 31:
+		switch (get_xop(inst)) {
+		case OP_31_XOP_MFMSR:
+			vcpu->arch.gpr[get_rt(inst)] = vcpu->arch.msr;
+			break;
+		case OP_31_XOP_MTMSRD:
+		{
+			ulong rs = vcpu->arch.gpr[get_rs(inst)];
+			if (inst & 0x10000) {
+				vcpu->arch.msr &= ~(MSR_RI | MSR_EE);
+				vcpu->arch.msr |= rs & (MSR_RI | MSR_EE);
+			} else
+				kvmppc_set_msr(vcpu, rs);
+			break;
+		}
+		case OP_31_XOP_MTMSR:
+			kvmppc_set_msr(vcpu, vcpu->arch.gpr[get_rs(inst)]);
+			break;
+		case OP_31_XOP_MFSRIN:
+		{
+			int srnum;
+
+			srnum = (vcpu->arch.gpr[get_rb(inst)] >> 28) & 0xf;
+			if (vcpu->arch.mmu.mfsrin) {
+				u32 sr;
+				sr = vcpu->arch.mmu.mfsrin(vcpu, srnum);
+				vcpu->arch.gpr[get_rt(inst)] = sr;
+			}
+			break;
+		}
+		case OP_31_XOP_MTSRIN:
+			vcpu->arch.mmu.mtsrin(vcpu,
+				(vcpu->arch.gpr[get_rb(inst)] >> 28) & 0xf,
+				vcpu->arch.gpr[get_rs(inst)]);
+			break;
+		case OP_31_XOP_TLBIE:
+		case OP_31_XOP_TLBIEL:
+		{
+			bool large = (inst & 0x00200000) ? true : false;
+			ulong addr = vcpu->arch.gpr[get_rb(inst)];
+			vcpu->arch.mmu.tlbie(vcpu, addr, large);
+			break;
+		}
+		case OP_31_XOP_EIOIO:
+			break;
+		case OP_31_XOP_SLBMTE:
+			if (!vcpu->arch.mmu.slbmte)
+				return EMULATE_FAIL;
+
+			vcpu->arch.mmu.slbmte(vcpu, vcpu->arch.gpr[get_rs(inst)],
+						vcpu->arch.gpr[get_rb(inst)]);
+			break;
+		case OP_31_XOP_SLBIE:
+			if (!vcpu->arch.mmu.slbie)
+				return EMULATE_FAIL;
+
+			vcpu->arch.mmu.slbie(vcpu, vcpu->arch.gpr[get_rb(inst)]);
+			break;
+		case OP_31_XOP_SLBIA:
+			if (!vcpu->arch.mmu.slbia)
+				return EMULATE_FAIL;
+
+			vcpu->arch.mmu.slbia(vcpu);
+			break;
+		case OP_31_XOP_SLBMFEE:
+			if (!vcpu->arch.mmu.slbmfee) {
+				emulated = EMULATE_FAIL;
+			} else {
+				ulong t, rb;
+
+				rb = vcpu->arch.gpr[get_rb(inst)];
+				t = vcpu->arch.mmu.slbmfee(vcpu, rb);
+				vcpu->arch.gpr[get_rt(inst)] = t;
+			}
+			break;
+		case OP_31_XOP_SLBMFEV:
+			if (!vcpu->arch.mmu.slbmfev) {
+				emulated = EMULATE_FAIL;
+			} else {
+				ulong t, rb;
+
+				rb = vcpu->arch.gpr[get_rb(inst)];
+				t = vcpu->arch.mmu.slbmfev(vcpu, rb);
+				vcpu->arch.gpr[get_rt(inst)] = t;
+			}
+			break;
+		case OP_31_XOP_DCBZ:
+		{
+			ulong rb =  vcpu->arch.gpr[get_rb(inst)];
+			ulong ra = 0;
+			ulong addr;
+			u32 zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+
+			if (get_ra(inst))
+				ra = vcpu->arch.gpr[get_ra(inst)];
+
+			addr = (ra + rb) & ~31ULL;
+			if (!(vcpu->arch.msr & MSR_SF))
+				addr &= 0xffffffff;
+
+			if (kvmppc_st(vcpu, addr, 32, zeros)) {
+				vcpu->arch.dear = addr;
+				vcpu->arch.fault_dear = addr;
+				to_book3s(vcpu)->dsisr = DSISR_PROTFAULT |
+						      DSISR_ISSTORE;
+				kvmppc_book3s_queue_irqprio(vcpu,
+					BOOK3S_INTERRUPT_DATA_STORAGE);
+				kvmppc_mmu_pte_flush(vcpu, addr, ~0xFFFULL);
+			}
+
+			break;
+		}
+		default:
+			emulated = EMULATE_FAIL;
+		}
+		break;
+	default:
+		emulated = EMULATE_FAIL;
+	}
+
+	return emulated;
+}
+
+void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat, bool upper,
+                    u32 val)
+{
+	if (upper) {
+		/* Upper BAT */
+		u32 bl = (val >> 2) & 0x7ff;
+		bat->bepi_mask = (~bl << 17);
+		bat->bepi = val & 0xfffe0000;
+		bat->vs = (val & 2) ? 1 : 0;
+		bat->vp = (val & 1) ? 1 : 0;
+		bat->raw = (bat->raw & 0xffffffff00000000ULL) | val;
+	} else {
+		/* Lower BAT */
+		bat->brpn = val & 0xfffe0000;
+		bat->wimg = (val >> 3) & 0xf;
+		bat->pp = val & 3;
+		bat->raw = (bat->raw & 0x00000000ffffffffULL) | ((u64)val << 32);
+	}
+}
+
+static void kvmppc_write_bat(struct kvm_vcpu *vcpu, int sprn, u32 val)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	struct kvmppc_bat *bat;
+
+	switch (sprn) {
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+		bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT0U) / 2];
+		break;
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+		bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT4U) / 2];
+		break;
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+		bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT0U) / 2];
+		break;
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT4U) / 2];
+		break;
+	default:
+		BUG();
+	}
+
+	kvmppc_set_bat(vcpu, bat, !(sprn % 2), val);
+}
+
+int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
+{
+	int emulated = EMULATE_DONE;
+
+	switch (sprn) {
+	case SPRN_SDR1:
+		to_book3s(vcpu)->sdr1 = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_DSISR:
+		to_book3s(vcpu)->dsisr = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_DAR:
+		vcpu->arch.dear = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_HIOR:
+		to_book3s(vcpu)->hior = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		kvmppc_write_bat(vcpu, sprn, (u32)vcpu->arch.gpr[rs]);
+		/* BAT writes happen so rarely that we're ok to flush
+		 * everything here */
+		kvmppc_mmu_pte_flush(vcpu, 0, 0);
+		break;
+	case SPRN_HID0:
+		to_book3s(vcpu)->hid[0] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_HID1:
+		to_book3s(vcpu)->hid[1] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_HID2:
+		to_book3s(vcpu)->hid[2] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_HID4:
+		to_book3s(vcpu)->hid[4] = vcpu->arch.gpr[rs];
+		break;
+	case SPRN_HID5:
+		to_book3s(vcpu)->hid[5] = vcpu->arch.gpr[rs];
+		/* guest HID5 set can change is_dcbz32 */
+		if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+		    (mfmsr() & MSR_HV))
+			vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
+		break;
+	case SPRN_ICTC:
+	case SPRN_THRM1:
+	case SPRN_THRM2:
+	case SPRN_THRM3:
+	case SPRN_CTRLF:
+	case SPRN_CTRLT:
+		break;
+	default:
+		printk(KERN_INFO "KVM: invalid SPR write: %d\n", sprn);
+#ifndef DEBUG_SPR
+		emulated = EMULATE_FAIL;
+#endif
+		break;
+	}
+
+	return emulated;
+}
+
+int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
+{
+	int emulated = EMULATE_DONE;
+
+	switch (sprn) {
+	case SPRN_SDR1:
+		vcpu->arch.gpr[rt] = to_book3s(vcpu)->sdr1;
+		break;
+	case SPRN_DSISR:
+		vcpu->arch.gpr[rt] = to_book3s(vcpu)->dsisr;
+		break;
+	case SPRN_DAR:
+		vcpu->arch.gpr[rt] = vcpu->arch.dear;
+		break;
+	case SPRN_HIOR:
+		vcpu->arch.gpr[rt] = to_book3s(vcpu)->hior;
+		break;
+	case SPRN_HID0:
+		vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[0];
+		break;
+	case SPRN_HID1:
+		vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[1];
+		break;
+	case SPRN_HID2:
+		vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[2];
+		break;
+	case SPRN_HID4:
+		vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[4];
+		break;
+	case SPRN_HID5:
+		vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[5];
+		break;
+	case SPRN_THRM1:
+	case SPRN_THRM2:
+	case SPRN_THRM3:
+	case SPRN_CTRLF:
+	case SPRN_CTRLT:
+		vcpu->arch.gpr[rt] = 0;
+		break;
+	default:
+		printk(KERN_INFO "KVM: invalid SPR read: %d\n", sprn);
+#ifndef DEBUG_SPR
+		emulated = EMULATE_FAIL;
+#endif
+		break;
+	}
+
+	return emulated;
+}
+
diff --git a/arch/powerpc/kvm/book3s_64_exports.c b/arch/powerpc/kvm/book3s_64_exports.c
new file mode 100644
index 000000000000..5b2db38ed86c
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_64_exports.c
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <linux/module.h>
+#include <asm/kvm_book3s.h>
+
+EXPORT_SYMBOL_GPL(kvmppc_trampoline_enter);
+EXPORT_SYMBOL_GPL(kvmppc_trampoline_lowmem);
diff --git a/arch/powerpc/kvm/book3s_64_interrupts.S b/arch/powerpc/kvm/book3s_64_interrupts.S
new file mode 100644
index 000000000000..7b55d8094c8b
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_64_interrupts.S
@@ -0,0 +1,392 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/kvm_asm.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+#include <asm/exception-64s.h>
+
+#define KVMPPC_HANDLE_EXIT .kvmppc_handle_exit
+#define ULONG_SIZE 8
+#define VCPU_GPR(n)     (VCPU_GPRS + (n * ULONG_SIZE))
+
+.macro mfpaca tmp_reg, src_reg, offset, vcpu_reg
+	ld	\tmp_reg, (PACA_EXMC+\offset)(r13)
+	std	\tmp_reg, VCPU_GPR(\src_reg)(\vcpu_reg)
+.endm
+
+.macro DISABLE_INTERRUPTS
+       mfmsr   r0
+       rldicl  r0,r0,48,1
+       rotldi  r0,r0,16
+       mtmsrd  r0,1
+.endm
+
+/*****************************************************************************
+ *                                                                           *
+ *     Guest entry / exit code that is in kernel module memory (highmem)     *
+ *                                                                           *
+ ****************************************************************************/
+
+/* Registers:
+ *  r3: kvm_run pointer
+ *  r4: vcpu pointer
+ */
+_GLOBAL(__kvmppc_vcpu_entry)
+
+kvm_start_entry:
+	/* Write correct stack frame */
+	mflr    r0
+	std     r0,16(r1)
+
+	/* Save host state to the stack */
+	stdu	r1, -SWITCH_FRAME_SIZE(r1)
+
+	/* Save r3 (kvm_run) and r4 (vcpu) */
+	SAVE_2GPRS(3, r1)
+
+	/* Save non-volatile registers (r14 - r31) */
+	SAVE_NVGPRS(r1)
+
+	/* Save LR */
+	mflr	r14
+	std	r14, _LINK(r1)
+
+/* XXX optimize non-volatile loading away */
+kvm_start_lightweight:
+
+	DISABLE_INTERRUPTS
+
+	/* Save R1/R2 in the PACA */
+	std	r1, PACAR1(r13)
+	std	r2, (PACA_EXMC+EX_SRR0)(r13)
+	ld	r3, VCPU_HIGHMEM_HANDLER(r4)
+	std	r3, PACASAVEDMSR(r13)
+
+	/* Load non-volatile guest state from the vcpu */
+	ld	r14, VCPU_GPR(r14)(r4)
+	ld	r15, VCPU_GPR(r15)(r4)
+	ld	r16, VCPU_GPR(r16)(r4)
+	ld	r17, VCPU_GPR(r17)(r4)
+	ld	r18, VCPU_GPR(r18)(r4)
+	ld	r19, VCPU_GPR(r19)(r4)
+	ld	r20, VCPU_GPR(r20)(r4)
+	ld	r21, VCPU_GPR(r21)(r4)
+	ld	r22, VCPU_GPR(r22)(r4)
+	ld	r23, VCPU_GPR(r23)(r4)
+	ld	r24, VCPU_GPR(r24)(r4)
+	ld	r25, VCPU_GPR(r25)(r4)
+	ld	r26, VCPU_GPR(r26)(r4)
+	ld	r27, VCPU_GPR(r27)(r4)
+	ld	r28, VCPU_GPR(r28)(r4)
+	ld	r29, VCPU_GPR(r29)(r4)
+	ld	r30, VCPU_GPR(r30)(r4)
+	ld	r31, VCPU_GPR(r31)(r4)
+
+	ld	r9, VCPU_PC(r4)			/* r9 = vcpu->arch.pc */
+	ld	r10, VCPU_SHADOW_MSR(r4)	/* r10 = vcpu->arch.shadow_msr */
+
+	ld	r3, VCPU_TRAMPOLINE_ENTER(r4)
+	mtsrr0	r3
+
+	LOAD_REG_IMMEDIATE(r3, MSR_KERNEL & ~(MSR_IR | MSR_DR))
+	mtsrr1	r3
+
+	/* Load guest state in the respective registers */
+	lwz	r3, VCPU_CR(r4)		/* r3 = vcpu->arch.cr */
+	stw	r3, (PACA_EXMC + EX_CCR)(r13)
+
+	ld	r3, VCPU_CTR(r4)	/* r3 = vcpu->arch.ctr */
+	mtctr	r3			/* CTR = r3 */
+
+	ld	r3, VCPU_LR(r4)		/* r3 = vcpu->arch.lr */
+	mtlr	r3			/* LR = r3 */
+
+	ld	r3, VCPU_XER(r4)	/* r3 = vcpu->arch.xer */
+	std	r3, (PACA_EXMC + EX_R3)(r13)
+
+	/* Some guests may need to have dcbz set to 32 byte length.
+	 *
+	 * Usually we ensure that by patching the guest's instructions
+	 * to trap on dcbz and emulate it in the hypervisor.
+	 *
+	 * If we can, we should tell the CPU to use 32 byte dcbz though,
+	 * because that's a lot faster.
+	 */
+
+	ld	r3, VCPU_HFLAGS(r4)
+	rldicl.	r3, r3, 0, 63		/* CR = ((r3 & 1) == 0) */
+	beq	no_dcbz32_on
+
+	mfspr   r3,SPRN_HID5
+	ori     r3, r3, 0x80		/* XXX HID5_dcbz32 = 0x80 */
+	mtspr   SPRN_HID5,r3
+
+no_dcbz32_on:
+	/*	Load guest GPRs */
+
+	ld	r3, VCPU_GPR(r9)(r4)
+	std	r3, (PACA_EXMC + EX_R9)(r13)
+	ld	r3, VCPU_GPR(r10)(r4)
+	std	r3, (PACA_EXMC + EX_R10)(r13)
+	ld	r3, VCPU_GPR(r11)(r4)
+	std	r3, (PACA_EXMC + EX_R11)(r13)
+	ld	r3, VCPU_GPR(r12)(r4)
+	std	r3, (PACA_EXMC + EX_R12)(r13)
+	ld	r3, VCPU_GPR(r13)(r4)
+	std	r3, (PACA_EXMC + EX_R13)(r13)
+
+	ld	r0, VCPU_GPR(r0)(r4)
+	ld	r1, VCPU_GPR(r1)(r4)
+	ld	r2, VCPU_GPR(r2)(r4)
+	ld	r3, VCPU_GPR(r3)(r4)
+	ld	r5, VCPU_GPR(r5)(r4)
+	ld	r6, VCPU_GPR(r6)(r4)
+	ld	r7, VCPU_GPR(r7)(r4)
+	ld	r8, VCPU_GPR(r8)(r4)
+	ld	r4, VCPU_GPR(r4)(r4)
+
+	/* This sets the Magic value for the trampoline */
+
+	li	r11, 1
+	stb	r11, PACA_KVM_IN_GUEST(r13)
+
+	/* Jump to SLB patching handlder and into our guest */
+	RFI
+
+/*
+ * This is the handler in module memory. It gets jumped at from the
+ * lowmem trampoline code, so it's basically the guest exit code.
+ *
+ */
+
+.global kvmppc_handler_highmem
+kvmppc_handler_highmem:
+
+	/*
+	 * Register usage at this point:
+	 *
+	 * R00   = guest R13
+	 * R01   = host R1
+	 * R02   = host R2
+	 * R10   = guest PC
+	 * R11   = guest MSR
+	 * R12   = exit handler id
+	 * R13   = PACA
+	 * PACA.exmc.R9    = guest R1
+	 * PACA.exmc.R10   = guest R10
+	 * PACA.exmc.R11   = guest R11
+	 * PACA.exmc.R12   = guest R12
+	 * PACA.exmc.R13   = guest R2
+	 * PACA.exmc.DAR   = guest DAR
+	 * PACA.exmc.DSISR = guest DSISR
+	 * PACA.exmc.LR    = guest instruction
+	 * PACA.exmc.CCR   = guest CR
+	 * PACA.exmc.SRR0  = guest R0
+	 *
+	 */
+
+	std	r3, (PACA_EXMC+EX_R3)(r13)
+
+	/* save the exit id in R3 */
+	mr	r3, r12
+
+	/* R12 = vcpu */
+	ld	r12, GPR4(r1)
+
+	/* Now save the guest state */
+
+	std	r0, VCPU_GPR(r13)(r12)
+	std	r4, VCPU_GPR(r4)(r12)
+	std	r5, VCPU_GPR(r5)(r12)
+	std	r6, VCPU_GPR(r6)(r12)
+	std	r7, VCPU_GPR(r7)(r12)
+	std	r8, VCPU_GPR(r8)(r12)
+	std	r9, VCPU_GPR(r9)(r12)
+
+	/* get registers from PACA */
+	mfpaca	r5, r0, EX_SRR0, r12
+	mfpaca	r5, r3, EX_R3, r12
+	mfpaca	r5, r1, EX_R9, r12
+	mfpaca	r5, r10, EX_R10, r12
+	mfpaca	r5, r11, EX_R11, r12
+	mfpaca	r5, r12, EX_R12, r12
+	mfpaca	r5, r2, EX_R13, r12
+
+	lwz	r5, (PACA_EXMC+EX_LR)(r13)
+	stw	r5, VCPU_LAST_INST(r12)
+
+	lwz	r5, (PACA_EXMC+EX_CCR)(r13)
+	stw	r5, VCPU_CR(r12)
+
+	ld	r5, VCPU_HFLAGS(r12)
+	rldicl.	r5, r5, 0, 63		/* CR = ((r5 & 1) == 0) */
+	beq	no_dcbz32_off
+
+	mfspr   r5,SPRN_HID5
+	rldimi  r5,r5,6,56
+	mtspr   SPRN_HID5,r5
+
+no_dcbz32_off:
+
+	/* XXX maybe skip on lightweight? */
+	std	r14, VCPU_GPR(r14)(r12)
+	std	r15, VCPU_GPR(r15)(r12)
+	std	r16, VCPU_GPR(r16)(r12)
+	std	r17, VCPU_GPR(r17)(r12)
+	std	r18, VCPU_GPR(r18)(r12)
+	std	r19, VCPU_GPR(r19)(r12)
+	std	r20, VCPU_GPR(r20)(r12)
+	std	r21, VCPU_GPR(r21)(r12)
+	std	r22, VCPU_GPR(r22)(r12)
+	std	r23, VCPU_GPR(r23)(r12)
+	std	r24, VCPU_GPR(r24)(r12)
+	std	r25, VCPU_GPR(r25)(r12)
+	std	r26, VCPU_GPR(r26)(r12)
+	std	r27, VCPU_GPR(r27)(r12)
+	std	r28, VCPU_GPR(r28)(r12)
+	std	r29, VCPU_GPR(r29)(r12)
+	std	r30, VCPU_GPR(r30)(r12)
+	std	r31, VCPU_GPR(r31)(r12)
+
+	/* Restore non-volatile host registers (r14 - r31) */
+	REST_NVGPRS(r1)
+
+	/* Save guest PC (R10) */
+	std	r10, VCPU_PC(r12)
+
+	/* Save guest msr (R11) */
+	std	r11, VCPU_SHADOW_MSR(r12)
+
+	/* Save guest CTR (in R12) */
+	mfctr	r5
+	std	r5, VCPU_CTR(r12)
+
+	/* Save guest LR */
+	mflr	r5
+	std	r5, VCPU_LR(r12)
+
+	/* Save guest XER */
+	mfxer	r5
+	std	r5, VCPU_XER(r12)
+
+	/* Save guest DAR */
+	ld	r5, (PACA_EXMC+EX_DAR)(r13)
+	std	r5, VCPU_FAULT_DEAR(r12)
+
+	/* Save guest DSISR */
+	lwz	r5, (PACA_EXMC+EX_DSISR)(r13)
+	std	r5, VCPU_FAULT_DSISR(r12)
+
+	/* Restore host msr -> SRR1 */
+	ld	r7, VCPU_HOST_MSR(r12)
+	mtsrr1	r7
+
+	/* Restore host IP -> SRR0 */
+	ld	r6, VCPU_HOST_RETIP(r12)
+	mtsrr0	r6
+
+	/*
+	 * For some interrupts, we need to call the real Linux
+	 * handler, so it can do work for us. This has to happen
+	 * as if the interrupt arrived from the kernel though,
+	 * so let's fake it here where most state is restored.
+	 *
+	 * Call Linux for hardware interrupts/decrementer
+	 * r3 = address of interrupt handler (exit reason)
+	 */
+
+	cmpwi	r3, BOOK3S_INTERRUPT_EXTERNAL
+	beq	call_linux_handler
+	cmpwi	r3, BOOK3S_INTERRUPT_DECREMENTER
+	beq	call_linux_handler
+
+	/* Back to Interruptable Mode! (goto kvm_return_point) */
+	RFI
+
+call_linux_handler:
+
+	/*
+	 * If we land here we need to jump back to the handler we
+	 * came from.
+	 *
+	 * We have a page that we can access from real mode, so let's
+	 * jump back to that and use it as a trampoline to get back into the
+	 * interrupt handler!
+	 *
+	 * R3 still contains the exit code,
+	 * R6 VCPU_HOST_RETIP and
+	 * R7 VCPU_HOST_MSR
+	 */
+
+	mtlr	r3
+
+	ld	r5, VCPU_TRAMPOLINE_LOWMEM(r12)
+	mtsrr0	r5
+	LOAD_REG_IMMEDIATE(r5, MSR_KERNEL & ~(MSR_IR | MSR_DR))
+	mtsrr1	r5
+
+	RFI
+
+.global kvm_return_point
+kvm_return_point:
+
+	/* Jump back to lightweight entry if we're supposed to */
+	/* go back into the guest */
+	mr	r5, r3
+	/* Restore r3 (kvm_run) and r4 (vcpu) */
+	REST_2GPRS(3, r1)
+	bl	KVMPPC_HANDLE_EXIT
+
+#if 0 /* XXX get lightweight exits back */
+	cmpwi	r3, RESUME_GUEST
+	bne	kvm_exit_heavyweight
+
+	/* put VCPU and KVM_RUN back into place and roll again! */
+	REST_2GPRS(3, r1)
+	b	kvm_start_lightweight
+
+kvm_exit_heavyweight:
+	/* Restore non-volatile host registers */
+	ld	r14, _LINK(r1)
+	mtlr	r14
+	REST_NVGPRS(r1)
+
+	addi    r1, r1, SWITCH_FRAME_SIZE
+#else
+	ld	r4, _LINK(r1)
+	mtlr	r4
+
+	cmpwi	r3, RESUME_GUEST
+	bne	kvm_exit_heavyweight
+
+	REST_2GPRS(3, r1)
+
+	addi    r1, r1, SWITCH_FRAME_SIZE
+
+	b	kvm_start_entry
+
+kvm_exit_heavyweight:
+
+	addi    r1, r1, SWITCH_FRAME_SIZE
+#endif
+
+	blr
diff --git a/arch/powerpc/kvm/book3s_64_mmu.c b/arch/powerpc/kvm/book3s_64_mmu.c
new file mode 100644
index 000000000000..5598f88f142e
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_64_mmu.c
@@ -0,0 +1,478 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/highmem.h>
+
+#include <asm/tlbflush.h>
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+
+/* #define DEBUG_MMU */
+
+#ifdef DEBUG_MMU
+#define dprintk(X...) printk(KERN_INFO X)
+#else
+#define dprintk(X...) do { } while(0)
+#endif
+
+static void kvmppc_mmu_book3s_64_reset_msr(struct kvm_vcpu *vcpu)
+{
+	kvmppc_set_msr(vcpu, MSR_SF);
+}
+
+static struct kvmppc_slb *kvmppc_mmu_book3s_64_find_slbe(
+				struct kvmppc_vcpu_book3s *vcpu_book3s,
+				gva_t eaddr)
+{
+	int i;
+	u64 esid = GET_ESID(eaddr);
+	u64 esid_1t = GET_ESID_1T(eaddr);
+
+	for (i = 0; i < vcpu_book3s->slb_nr; i++) {
+		u64 cmp_esid = esid;
+
+		if (!vcpu_book3s->slb[i].valid)
+			continue;
+
+		if (vcpu_book3s->slb[i].large)
+			cmp_esid = esid_1t;
+
+		if (vcpu_book3s->slb[i].esid == cmp_esid)
+			return &vcpu_book3s->slb[i];
+	}
+
+	dprintk("KVM: No SLB entry found for 0x%lx [%llx | %llx]\n",
+		eaddr, esid, esid_1t);
+	for (i = 0; i < vcpu_book3s->slb_nr; i++) {
+	    if (vcpu_book3s->slb[i].vsid)
+		dprintk("  %d: %c%c %llx %llx\n", i,
+			vcpu_book3s->slb[i].valid ? 'v' : ' ',
+			vcpu_book3s->slb[i].large ? 'l' : ' ',
+			vcpu_book3s->slb[i].esid,
+			vcpu_book3s->slb[i].vsid);
+	}
+
+	return NULL;
+}
+
+static u64 kvmppc_mmu_book3s_64_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr,
+					 bool data)
+{
+	struct kvmppc_slb *slb;
+
+	slb = kvmppc_mmu_book3s_64_find_slbe(to_book3s(vcpu), eaddr);
+	if (!slb)
+		return 0;
+
+	if (slb->large)
+		return (((u64)eaddr >> 12) & 0xfffffff) |
+		       (((u64)slb->vsid) << 28);
+
+	return (((u64)eaddr >> 12) & 0xffff) | (((u64)slb->vsid) << 16);
+}
+
+static int kvmppc_mmu_book3s_64_get_pagesize(struct kvmppc_slb *slbe)
+{
+	return slbe->large ? 24 : 12;
+}
+
+static u32 kvmppc_mmu_book3s_64_get_page(struct kvmppc_slb *slbe, gva_t eaddr)
+{
+	int p = kvmppc_mmu_book3s_64_get_pagesize(slbe);
+	return ((eaddr & 0xfffffff) >> p);
+}
+
+static hva_t kvmppc_mmu_book3s_64_get_pteg(
+				struct kvmppc_vcpu_book3s *vcpu_book3s,
+				struct kvmppc_slb *slbe, gva_t eaddr,
+				bool second)
+{
+	u64 hash, pteg, htabsize;
+	u32 page;
+	hva_t r;
+
+	page = kvmppc_mmu_book3s_64_get_page(slbe, eaddr);
+	htabsize = ((1 << ((vcpu_book3s->sdr1 & 0x1f) + 11)) - 1);
+
+	hash = slbe->vsid ^ page;
+	if (second)
+		hash = ~hash;
+	hash &= ((1ULL << 39ULL) - 1ULL);
+	hash &= htabsize;
+	hash <<= 7ULL;
+
+	pteg = vcpu_book3s->sdr1 & 0xfffffffffffc0000ULL;
+	pteg |= hash;
+
+	dprintk("MMU: page=0x%x sdr1=0x%llx pteg=0x%llx vsid=0x%llx\n",
+		page, vcpu_book3s->sdr1, pteg, slbe->vsid);
+
+	r = gfn_to_hva(vcpu_book3s->vcpu.kvm, pteg >> PAGE_SHIFT);
+	if (kvm_is_error_hva(r))
+		return r;
+	return r | (pteg & ~PAGE_MASK);
+}
+
+static u64 kvmppc_mmu_book3s_64_get_avpn(struct kvmppc_slb *slbe, gva_t eaddr)
+{
+	int p = kvmppc_mmu_book3s_64_get_pagesize(slbe);
+	u64 avpn;
+
+	avpn = kvmppc_mmu_book3s_64_get_page(slbe, eaddr);
+	avpn |= slbe->vsid << (28 - p);
+
+	if (p < 24)
+		avpn >>= ((80 - p) - 56) - 8;
+	else
+		avpn <<= 8;
+
+	return avpn;
+}
+
+static int kvmppc_mmu_book3s_64_xlate(struct kvm_vcpu *vcpu, gva_t eaddr,
+				struct kvmppc_pte *gpte, bool data)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	struct kvmppc_slb *slbe;
+	hva_t ptegp;
+	u64 pteg[16];
+	u64 avpn = 0;
+	int i;
+	u8 key = 0;
+	bool found = false;
+	bool perm_err = false;
+	int second = 0;
+
+	slbe = kvmppc_mmu_book3s_64_find_slbe(vcpu_book3s, eaddr);
+	if (!slbe)
+		goto no_seg_found;
+
+do_second:
+	ptegp = kvmppc_mmu_book3s_64_get_pteg(vcpu_book3s, slbe, eaddr, second);
+	if (kvm_is_error_hva(ptegp))
+		goto no_page_found;
+
+	avpn = kvmppc_mmu_book3s_64_get_avpn(slbe, eaddr);
+
+	if(copy_from_user(pteg, (void __user *)ptegp, sizeof(pteg))) {
+		printk(KERN_ERR "KVM can't copy data from 0x%lx!\n", ptegp);
+		goto no_page_found;
+	}
+
+	if ((vcpu->arch.msr & MSR_PR) && slbe->Kp)
+		key = 4;
+	else if (!(vcpu->arch.msr & MSR_PR) && slbe->Ks)
+		key = 4;
+
+	for (i=0; i<16; i+=2) {
+		u64 v = pteg[i];
+		u64 r = pteg[i+1];
+
+		/* Valid check */
+		if (!(v & HPTE_V_VALID))
+			continue;
+		/* Hash check */
+		if ((v & HPTE_V_SECONDARY) != second)
+			continue;
+
+		/* AVPN compare */
+		if (HPTE_V_AVPN_VAL(avpn) == HPTE_V_AVPN_VAL(v)) {
+			u8 pp = (r & HPTE_R_PP) | key;
+			int eaddr_mask = 0xFFF;
+
+			gpte->eaddr = eaddr;
+			gpte->vpage = kvmppc_mmu_book3s_64_ea_to_vp(vcpu,
+								    eaddr,
+								    data);
+			if (slbe->large)
+				eaddr_mask = 0xFFFFFF;
+			gpte->raddr = (r & HPTE_R_RPN) | (eaddr & eaddr_mask);
+			gpte->may_execute = ((r & HPTE_R_N) ? false : true);
+			gpte->may_read = false;
+			gpte->may_write = false;
+
+			switch (pp) {
+			case 0:
+			case 1:
+			case 2:
+			case 6:
+				gpte->may_write = true;
+				/* fall through */
+			case 3:
+			case 5:
+			case 7:
+				gpte->may_read = true;
+				break;
+			}
+
+			if (!gpte->may_read) {
+				perm_err = true;
+				continue;
+			}
+
+			dprintk("KVM MMU: Translated 0x%lx [0x%llx] -> 0x%llx "
+				"-> 0x%llx\n",
+				eaddr, avpn, gpte->vpage, gpte->raddr);
+			found = true;
+			break;
+		}
+	}
+
+	/* Update PTE R and C bits, so the guest's swapper knows we used the
+	 * page */
+	if (found) {
+		u32 oldr = pteg[i+1];
+
+		if (gpte->may_read) {
+			/* Set the accessed flag */
+			pteg[i+1] |= HPTE_R_R;
+		}
+		if (gpte->may_write) {
+			/* Set the dirty flag */
+			pteg[i+1] |= HPTE_R_C;
+		} else {
+			dprintk("KVM: Mapping read-only page!\n");
+		}
+
+		/* Write back into the PTEG */
+		if (pteg[i+1] != oldr)
+			copy_to_user((void __user *)ptegp, pteg, sizeof(pteg));
+
+		return 0;
+	} else {
+		dprintk("KVM MMU: No PTE found (ea=0x%lx sdr1=0x%llx "
+			"ptegp=0x%lx)\n",
+			eaddr, to_book3s(vcpu)->sdr1, ptegp);
+		for (i = 0; i < 16; i += 2)
+			dprintk("   %02d: 0x%llx - 0x%llx (0x%llx)\n",
+				i, pteg[i], pteg[i+1], avpn);
+
+		if (!second) {
+			second = HPTE_V_SECONDARY;
+			goto do_second;
+		}
+	}
+
+
+no_page_found:
+
+
+	if (perm_err)
+		return -EPERM;
+
+	return -ENOENT;
+
+no_seg_found:
+
+	dprintk("KVM MMU: Trigger segment fault\n");
+	return -EINVAL;
+}
+
+static void kvmppc_mmu_book3s_64_slbmte(struct kvm_vcpu *vcpu, u64 rs, u64 rb)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s;
+	u64 esid, esid_1t;
+	int slb_nr;
+	struct kvmppc_slb *slbe;
+
+	dprintk("KVM MMU: slbmte(0x%llx, 0x%llx)\n", rs, rb);
+
+	vcpu_book3s = to_book3s(vcpu);
+
+	esid = GET_ESID(rb);
+	esid_1t = GET_ESID_1T(rb);
+	slb_nr = rb & 0xfff;
+
+	if (slb_nr > vcpu_book3s->slb_nr)
+		return;
+
+	slbe = &vcpu_book3s->slb[slb_nr];
+
+	slbe->large = (rs & SLB_VSID_L) ? 1 : 0;
+	slbe->esid  = slbe->large ? esid_1t : esid;
+	slbe->vsid  = rs >> 12;
+	slbe->valid = (rb & SLB_ESID_V) ? 1 : 0;
+	slbe->Ks    = (rs & SLB_VSID_KS) ? 1 : 0;
+	slbe->Kp    = (rs & SLB_VSID_KP) ? 1 : 0;
+	slbe->nx    = (rs & SLB_VSID_N) ? 1 : 0;
+	slbe->class = (rs & SLB_VSID_C) ? 1 : 0;
+
+	slbe->orige = rb & (ESID_MASK | SLB_ESID_V);
+	slbe->origv = rs;
+
+	/* Map the new segment */
+	kvmppc_mmu_map_segment(vcpu, esid << SID_SHIFT);
+}
+
+static u64 kvmppc_mmu_book3s_64_slbmfee(struct kvm_vcpu *vcpu, u64 slb_nr)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	struct kvmppc_slb *slbe;
+
+	if (slb_nr > vcpu_book3s->slb_nr)
+		return 0;
+
+	slbe = &vcpu_book3s->slb[slb_nr];
+
+	return slbe->orige;
+}
+
+static u64 kvmppc_mmu_book3s_64_slbmfev(struct kvm_vcpu *vcpu, u64 slb_nr)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	struct kvmppc_slb *slbe;
+
+	if (slb_nr > vcpu_book3s->slb_nr)
+		return 0;
+
+	slbe = &vcpu_book3s->slb[slb_nr];
+
+	return slbe->origv;
+}
+
+static void kvmppc_mmu_book3s_64_slbie(struct kvm_vcpu *vcpu, u64 ea)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	struct kvmppc_slb *slbe;
+
+	dprintk("KVM MMU: slbie(0x%llx)\n", ea);
+
+	slbe = kvmppc_mmu_book3s_64_find_slbe(vcpu_book3s, ea);
+
+	if (!slbe)
+		return;
+
+	dprintk("KVM MMU: slbie(0x%llx, 0x%llx)\n", ea, slbe->esid);
+
+	slbe->valid = false;
+
+	kvmppc_mmu_map_segment(vcpu, ea);
+}
+
+static void kvmppc_mmu_book3s_64_slbia(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	int i;
+
+	dprintk("KVM MMU: slbia()\n");
+
+	for (i = 1; i < vcpu_book3s->slb_nr; i++)
+		vcpu_book3s->slb[i].valid = false;
+
+	if (vcpu->arch.msr & MSR_IR) {
+		kvmppc_mmu_flush_segments(vcpu);
+		kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc);
+	}
+}
+
+static void kvmppc_mmu_book3s_64_mtsrin(struct kvm_vcpu *vcpu, u32 srnum,
+					ulong value)
+{
+	u64 rb = 0, rs = 0;
+
+	/* ESID = srnum */
+	rb |= (srnum & 0xf) << 28;
+	/* Set the valid bit */
+	rb |= 1 << 27;
+	/* Index = ESID */
+	rb |= srnum;
+
+	/* VSID = VSID */
+	rs |= (value & 0xfffffff) << 12;
+	/* flags = flags */
+	rs |= ((value >> 27) & 0xf) << 9;
+
+	kvmppc_mmu_book3s_64_slbmte(vcpu, rs, rb);
+}
+
+static void kvmppc_mmu_book3s_64_tlbie(struct kvm_vcpu *vcpu, ulong va,
+				       bool large)
+{
+	u64 mask = 0xFFFFFFFFFULL;
+
+	dprintk("KVM MMU: tlbie(0x%lx)\n", va);
+
+	if (large)
+		mask = 0xFFFFFF000ULL;
+	kvmppc_mmu_pte_vflush(vcpu, va >> 12, mask);
+}
+
+static int kvmppc_mmu_book3s_64_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
+					     u64 *vsid)
+{
+	switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+	case 0:
+		*vsid = (VSID_REAL >> 16) | esid;
+		break;
+	case MSR_IR:
+		*vsid = (VSID_REAL_IR >> 16) | esid;
+		break;
+	case MSR_DR:
+		*vsid = (VSID_REAL_DR >> 16) | esid;
+		break;
+	case MSR_DR|MSR_IR:
+	{
+		ulong ea;
+		struct kvmppc_slb *slb;
+		ea = esid << SID_SHIFT;
+		slb = kvmppc_mmu_book3s_64_find_slbe(to_book3s(vcpu), ea);
+		if (slb)
+			*vsid = slb->vsid;
+		else
+			return -ENOENT;
+
+		break;
+	}
+	default:
+		BUG();
+		break;
+	}
+
+	return 0;
+}
+
+static bool kvmppc_mmu_book3s_64_is_dcbz32(struct kvm_vcpu *vcpu)
+{
+	return (to_book3s(vcpu)->hid[5] & 0x80);
+}
+
+void kvmppc_mmu_book3s_64_init(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_mmu *mmu = &vcpu->arch.mmu;
+
+	mmu->mfsrin = NULL;
+	mmu->mtsrin = kvmppc_mmu_book3s_64_mtsrin;
+	mmu->slbmte = kvmppc_mmu_book3s_64_slbmte;
+	mmu->slbmfee = kvmppc_mmu_book3s_64_slbmfee;
+	mmu->slbmfev = kvmppc_mmu_book3s_64_slbmfev;
+	mmu->slbie = kvmppc_mmu_book3s_64_slbie;
+	mmu->slbia = kvmppc_mmu_book3s_64_slbia;
+	mmu->xlate = kvmppc_mmu_book3s_64_xlate;
+	mmu->reset_msr = kvmppc_mmu_book3s_64_reset_msr;
+	mmu->tlbie = kvmppc_mmu_book3s_64_tlbie;
+	mmu->esid_to_vsid = kvmppc_mmu_book3s_64_esid_to_vsid;
+	mmu->ea_to_vp = kvmppc_mmu_book3s_64_ea_to_vp;
+	mmu->is_dcbz32 = kvmppc_mmu_book3s_64_is_dcbz32;
+
+	vcpu->arch.hflags |= BOOK3S_HFLAG_SLB;
+}
diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
new file mode 100644
index 000000000000..f2899b297ffd
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -0,0 +1,408 @@
+/*
+ * Copyright (C) 2009 SUSE Linux Products GmbH. All rights reserved.
+ *
+ * Authors:
+ *     Alexander Graf <agraf@suse.de>
+ *     Kevin Wolf <mail@kevin-wolf.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+#include <asm/mmu-hash64.h>
+#include <asm/machdep.h>
+#include <asm/mmu_context.h>
+#include <asm/hw_irq.h>
+
+#define PTE_SIZE 12
+#define VSID_ALL 0
+
+/* #define DEBUG_MMU */
+/* #define DEBUG_SLB */
+
+#ifdef DEBUG_MMU
+#define dprintk_mmu(a, ...) printk(KERN_INFO a, __VA_ARGS__)
+#else
+#define dprintk_mmu(a, ...) do { } while(0)
+#endif
+
+#ifdef DEBUG_SLB
+#define dprintk_slb(a, ...) printk(KERN_INFO a, __VA_ARGS__)
+#else
+#define dprintk_slb(a, ...) do { } while(0)
+#endif
+
+static void invalidate_pte(struct hpte_cache *pte)
+{
+	dprintk_mmu("KVM: Flushing SPT %d: 0x%llx (0x%llx) -> 0x%llx\n",
+		    i, pte->pte.eaddr, pte->pte.vpage, pte->host_va);
+
+	ppc_md.hpte_invalidate(pte->slot, pte->host_va,
+			       MMU_PAGE_4K, MMU_SEGSIZE_256M,
+			       false);
+	pte->host_va = 0;
+	kvm_release_pfn_dirty(pte->pfn);
+}
+
+void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 guest_ea, u64 ea_mask)
+{
+	int i;
+
+	dprintk_mmu("KVM: Flushing %d Shadow PTEs: 0x%llx & 0x%llx\n",
+		    vcpu->arch.hpte_cache_offset, guest_ea, ea_mask);
+	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+	guest_ea &= ea_mask;
+	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+		struct hpte_cache *pte;
+
+		pte = &vcpu->arch.hpte_cache[i];
+		if (!pte->host_va)
+			continue;
+
+		if ((pte->pte.eaddr & ea_mask) == guest_ea) {
+			invalidate_pte(pte);
+		}
+	}
+
+	/* Doing a complete flush -> start from scratch */
+	if (!ea_mask)
+		vcpu->arch.hpte_cache_offset = 0;
+}
+
+void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 guest_vp, u64 vp_mask)
+{
+	int i;
+
+	dprintk_mmu("KVM: Flushing %d Shadow vPTEs: 0x%llx & 0x%llx\n",
+		    vcpu->arch.hpte_cache_offset, guest_vp, vp_mask);
+	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+	guest_vp &= vp_mask;
+	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+		struct hpte_cache *pte;
+
+		pte = &vcpu->arch.hpte_cache[i];
+		if (!pte->host_va)
+			continue;
+
+		if ((pte->pte.vpage & vp_mask) == guest_vp) {
+			invalidate_pte(pte);
+		}
+	}
+}
+
+void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, u64 pa_start, u64 pa_end)
+{
+	int i;
+
+	dprintk_mmu("KVM: Flushing %d Shadow pPTEs: 0x%llx & 0x%llx\n",
+		    vcpu->arch.hpte_cache_offset, guest_pa, pa_mask);
+	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+		struct hpte_cache *pte;
+
+		pte = &vcpu->arch.hpte_cache[i];
+		if (!pte->host_va)
+			continue;
+
+		if ((pte->pte.raddr >= pa_start) &&
+		    (pte->pte.raddr < pa_end)) {
+			invalidate_pte(pte);
+		}
+	}
+}
+
+struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data)
+{
+	int i;
+	u64 guest_vp;
+
+	guest_vp = vcpu->arch.mmu.ea_to_vp(vcpu, ea, false);
+	for (i=0; i<vcpu->arch.hpte_cache_offset; i++) {
+		struct hpte_cache *pte;
+
+		pte = &vcpu->arch.hpte_cache[i];
+		if (!pte->host_va)
+			continue;
+
+		if (pte->pte.vpage == guest_vp)
+			return &pte->pte;
+	}
+
+	return NULL;
+}
+
+static int kvmppc_mmu_hpte_cache_next(struct kvm_vcpu *vcpu)
+{
+	if (vcpu->arch.hpte_cache_offset == HPTEG_CACHE_NUM)
+		kvmppc_mmu_pte_flush(vcpu, 0, 0);
+
+	return vcpu->arch.hpte_cache_offset++;
+}
+
+/* We keep 512 gvsid->hvsid entries, mapping the guest ones to the array using
+ * a hash, so we don't waste cycles on looping */
+static u16 kvmppc_sid_hash(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+	return (u16)(((gvsid >> (SID_MAP_BITS * 7)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 6)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 5)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 4)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 3)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 2)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 1)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 0)) & SID_MAP_MASK));
+}
+
+
+static struct kvmppc_sid_map *find_sid_vsid(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+	struct kvmppc_sid_map *map;
+	u16 sid_map_mask;
+
+	if (vcpu->arch.msr & MSR_PR)
+		gvsid |= VSID_PR;
+
+	sid_map_mask = kvmppc_sid_hash(vcpu, gvsid);
+	map = &to_book3s(vcpu)->sid_map[sid_map_mask];
+	if (map->guest_vsid == gvsid) {
+		dprintk_slb("SLB: Searching 0x%llx -> 0x%llx\n",
+			    gvsid, map->host_vsid);
+		return map;
+	}
+
+	map = &to_book3s(vcpu)->sid_map[SID_MAP_MASK - sid_map_mask];
+	if (map->guest_vsid == gvsid) {
+		dprintk_slb("SLB: Searching 0x%llx -> 0x%llx\n",
+			    gvsid, map->host_vsid);
+		return map;
+	}
+
+	dprintk_slb("SLB: Searching 0x%llx -> not found\n", gvsid);
+	return NULL;
+}
+
+int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
+{
+	pfn_t hpaddr;
+	ulong hash, hpteg, va;
+	u64 vsid;
+	int ret;
+	int rflags = 0x192;
+	int vflags = 0;
+	int attempt = 0;
+	struct kvmppc_sid_map *map;
+
+	/* Get host physical address for gpa */
+	hpaddr = gfn_to_pfn(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT);
+	if (kvm_is_error_hva(hpaddr)) {
+		printk(KERN_INFO "Couldn't get guest page for gfn %llx!\n", orig_pte->eaddr);
+		return -EINVAL;
+	}
+	hpaddr <<= PAGE_SHIFT;
+#if PAGE_SHIFT == 12
+#elif PAGE_SHIFT == 16
+	hpaddr |= orig_pte->raddr & 0xf000;
+#else
+#error Unknown page size
+#endif
+
+	/* and write the mapping ea -> hpa into the pt */
+	vcpu->arch.mmu.esid_to_vsid(vcpu, orig_pte->eaddr >> SID_SHIFT, &vsid);
+	map = find_sid_vsid(vcpu, vsid);
+	if (!map) {
+		kvmppc_mmu_map_segment(vcpu, orig_pte->eaddr);
+		map = find_sid_vsid(vcpu, vsid);
+	}
+	BUG_ON(!map);
+
+	vsid = map->host_vsid;
+	va = hpt_va(orig_pte->eaddr, vsid, MMU_SEGSIZE_256M);
+
+	if (!orig_pte->may_write)
+		rflags |= HPTE_R_PP;
+	else
+		mark_page_dirty(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT);
+
+	if (!orig_pte->may_execute)
+		rflags |= HPTE_R_N;
+
+	hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M);
+
+map_again:
+	hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+
+	/* In case we tried normal mapping already, let's nuke old entries */
+	if (attempt > 1)
+		if (ppc_md.hpte_remove(hpteg) < 0)
+			return -1;
+
+	ret = ppc_md.hpte_insert(hpteg, va, hpaddr, rflags, vflags, MMU_PAGE_4K, MMU_SEGSIZE_256M);
+
+	if (ret < 0) {
+		/* If we couldn't map a primary PTE, try a secondary */
+#ifdef USE_SECONDARY
+		hash = ~hash;
+		attempt++;
+		if (attempt % 2)
+			vflags = HPTE_V_SECONDARY;
+		else
+			vflags = 0;
+#else
+		attempt = 2;
+#endif
+		goto map_again;
+	} else {
+		int hpte_id = kvmppc_mmu_hpte_cache_next(vcpu);
+		struct hpte_cache *pte = &vcpu->arch.hpte_cache[hpte_id];
+
+		dprintk_mmu("KVM: %c%c Map 0x%llx: [%lx] 0x%lx (0x%llx) -> %lx\n",
+			    ((rflags & HPTE_R_PP) == 3) ? '-' : 'w',
+			    (rflags & HPTE_R_N) ? '-' : 'x',
+			    orig_pte->eaddr, hpteg, va, orig_pte->vpage, hpaddr);
+
+		pte->slot = hpteg + (ret & 7);
+		pte->host_va = va;
+		pte->pte = *orig_pte;
+		pte->pfn = hpaddr >> PAGE_SHIFT;
+	}
+
+	return 0;
+}
+
+static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+	struct kvmppc_sid_map *map;
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	u16 sid_map_mask;
+	static int backwards_map = 0;
+
+	if (vcpu->arch.msr & MSR_PR)
+		gvsid |= VSID_PR;
+
+	/* We might get collisions that trap in preceding order, so let's
+	   map them differently */
+
+	sid_map_mask = kvmppc_sid_hash(vcpu, gvsid);
+	if (backwards_map)
+		sid_map_mask = SID_MAP_MASK - sid_map_mask;
+
+	map = &to_book3s(vcpu)->sid_map[sid_map_mask];
+
+	/* Make sure we're taking the other map next time */
+	backwards_map = !backwards_map;
+
+	/* Uh-oh ... out of mappings. Let's flush! */
+	if (vcpu_book3s->vsid_next == vcpu_book3s->vsid_max) {
+		vcpu_book3s->vsid_next = vcpu_book3s->vsid_first;
+		memset(vcpu_book3s->sid_map, 0,
+		       sizeof(struct kvmppc_sid_map) * SID_MAP_NUM);
+		kvmppc_mmu_pte_flush(vcpu, 0, 0);
+		kvmppc_mmu_flush_segments(vcpu);
+	}
+	map->host_vsid = vcpu_book3s->vsid_next++;
+
+	map->guest_vsid = gvsid;
+	map->valid = true;
+
+	return map;
+}
+
+static int kvmppc_mmu_next_segment(struct kvm_vcpu *vcpu, ulong esid)
+{
+	int i;
+	int max_slb_size = 64;
+	int found_inval = -1;
+	int r;
+
+	if (!get_paca()->kvm_slb_max)
+		get_paca()->kvm_slb_max = 1;
+
+	/* Are we overwriting? */
+	for (i = 1; i < get_paca()->kvm_slb_max; i++) {
+		if (!(get_paca()->kvm_slb[i].esid & SLB_ESID_V))
+			found_inval = i;
+		else if ((get_paca()->kvm_slb[i].esid & ESID_MASK) == esid)
+			return i;
+	}
+
+	/* Found a spare entry that was invalidated before */
+	if (found_inval > 0)
+		return found_inval;
+
+	/* No spare invalid entry, so create one */
+
+	if (mmu_slb_size < 64)
+		max_slb_size = mmu_slb_size;
+
+	/* Overflowing -> purge */
+	if ((get_paca()->kvm_slb_max) == max_slb_size)
+		kvmppc_mmu_flush_segments(vcpu);
+
+	r = get_paca()->kvm_slb_max;
+	get_paca()->kvm_slb_max++;
+
+	return r;
+}
+
+int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr)
+{
+	u64 esid = eaddr >> SID_SHIFT;
+	u64 slb_esid = (eaddr & ESID_MASK) | SLB_ESID_V;
+	u64 slb_vsid = SLB_VSID_USER;
+	u64 gvsid;
+	int slb_index;
+	struct kvmppc_sid_map *map;
+
+	slb_index = kvmppc_mmu_next_segment(vcpu, eaddr & ESID_MASK);
+
+	if (vcpu->arch.mmu.esid_to_vsid(vcpu, esid, &gvsid)) {
+		/* Invalidate an entry */
+		get_paca()->kvm_slb[slb_index].esid = 0;
+		return -ENOENT;
+	}
+
+	map = find_sid_vsid(vcpu, gvsid);
+	if (!map)
+		map = create_sid_map(vcpu, gvsid);
+
+	map->guest_esid = esid;
+
+	slb_vsid |= (map->host_vsid << 12);
+	slb_vsid &= ~SLB_VSID_KP;
+	slb_esid |= slb_index;
+
+	get_paca()->kvm_slb[slb_index].esid = slb_esid;
+	get_paca()->kvm_slb[slb_index].vsid = slb_vsid;
+
+	dprintk_slb("slbmte %#llx, %#llx\n", slb_vsid, slb_esid);
+
+	return 0;
+}
+
+void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu)
+{
+	get_paca()->kvm_slb_max = 1;
+	get_paca()->kvm_slb[0].esid = 0;
+}
+
+void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
+{
+	kvmppc_mmu_pte_flush(vcpu, 0, 0);
+}
diff --git a/arch/powerpc/kvm/book3s_64_rmhandlers.S b/arch/powerpc/kvm/book3s_64_rmhandlers.S
new file mode 100644
index 000000000000..fb7dd2e9ac88
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_64_rmhandlers.S
@@ -0,0 +1,131 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/kvm_asm.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+#include <asm/exception-64s.h>
+
+/*****************************************************************************
+ *                                                                           *
+ *        Real Mode handlers that need to be in low physical memory          *
+ *                                                                           *
+ ****************************************************************************/
+
+
+.macro INTERRUPT_TRAMPOLINE intno
+
+.global kvmppc_trampoline_\intno
+kvmppc_trampoline_\intno:
+
+	mtspr	SPRN_SPRG_SCRATCH0, r13		/* Save r13 */
+
+	/*
+	 * First thing to do is to find out if we're coming
+	 * from a KVM guest or a Linux process.
+	 *
+	 * To distinguish, we check a magic byte in the PACA
+	 */
+	mfspr	r13, SPRN_SPRG_PACA		/* r13 = PACA */
+	std	r12, (PACA_EXMC + EX_R12)(r13)
+	mfcr	r12
+	stw	r12, (PACA_EXMC + EX_CCR)(r13)
+	lbz	r12, PACA_KVM_IN_GUEST(r13)
+	cmpwi	r12, 0
+	bne	..kvmppc_handler_hasmagic_\intno
+	/* No KVM guest? Then jump back to the Linux handler! */
+	lwz	r12, (PACA_EXMC + EX_CCR)(r13)
+	mtcr	r12
+	ld	r12, (PACA_EXMC + EX_R12)(r13)
+	mfspr	r13, SPRN_SPRG_SCRATCH0		/* r13 = original r13 */
+	b	kvmppc_resume_\intno		/* Get back original handler */
+
+	/* Now we know we're handling a KVM guest */
+..kvmppc_handler_hasmagic_\intno:
+	/* Unset guest state */
+	li	r12, 0
+	stb	r12, PACA_KVM_IN_GUEST(r13)
+
+	std	r1, (PACA_EXMC+EX_R9)(r13)
+	std	r10, (PACA_EXMC+EX_R10)(r13)
+	std	r11, (PACA_EXMC+EX_R11)(r13)
+	std	r2, (PACA_EXMC+EX_R13)(r13)
+
+	mfsrr0	r10
+	mfsrr1	r11
+
+	/* Restore R1/R2 so we can handle faults */
+	ld	r1, PACAR1(r13)
+	ld	r2, (PACA_EXMC+EX_SRR0)(r13)
+
+	/* Let's store which interrupt we're handling */
+	li	r12, \intno
+
+	/* Jump into the SLB exit code that goes to the highmem handler */
+	b	kvmppc_handler_trampoline_exit
+
+.endm
+
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_SYSTEM_RESET
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_MACHINE_CHECK
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DATA_STORAGE
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DATA_SEGMENT
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_INST_STORAGE
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_INST_SEGMENT
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_EXTERNAL
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_ALIGNMENT
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_PROGRAM
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_FP_UNAVAIL
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DECREMENTER
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_SYSCALL
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_TRACE
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_PERFMON
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_ALTIVEC
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_VSX
+
+/*
+ * This trampoline brings us back to a real mode handler
+ *
+ * Input Registers:
+ *
+ * R6 = SRR0
+ * R7 = SRR1
+ * LR = real-mode IP
+ *
+ */
+.global kvmppc_handler_lowmem_trampoline
+kvmppc_handler_lowmem_trampoline:
+
+	mtsrr0	r6
+	mtsrr1	r7
+	blr
+kvmppc_handler_lowmem_trampoline_end:
+
+.global kvmppc_trampoline_lowmem
+kvmppc_trampoline_lowmem:
+	.long kvmppc_handler_lowmem_trampoline - _stext
+
+.global kvmppc_trampoline_enter
+kvmppc_trampoline_enter:
+	.long kvmppc_handler_trampoline_enter - _stext
+
+#include "book3s_64_slb.S"
+
diff --git a/arch/powerpc/kvm/book3s_64_slb.S b/arch/powerpc/kvm/book3s_64_slb.S
new file mode 100644
index 000000000000..ecd237a03fd0
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_64_slb.S
@@ -0,0 +1,262 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#define SHADOW_SLB_ESID(num)	(SLBSHADOW_SAVEAREA + (num * 0x10))
+#define SHADOW_SLB_VSID(num)	(SLBSHADOW_SAVEAREA + (num * 0x10) + 0x8)
+#define UNBOLT_SLB_ENTRY(num) \
+	ld	r9, SHADOW_SLB_ESID(num)(r12); \
+	/* Invalid? Skip. */; \
+	rldicl. r0, r9, 37, 63; \
+	beq	slb_entry_skip_ ## num; \
+	xoris	r9, r9, SLB_ESID_V@h; \
+	std	r9, SHADOW_SLB_ESID(num)(r12); \
+  slb_entry_skip_ ## num:
+
+#define REBOLT_SLB_ENTRY(num) \
+	ld	r10, SHADOW_SLB_ESID(num)(r11); \
+	cmpdi	r10, 0; \
+	beq	slb_exit_skip_1; \
+	oris	r10, r10, SLB_ESID_V@h; \
+	ld	r9, SHADOW_SLB_VSID(num)(r11); \
+	slbmte	r9, r10; \
+	std	r10, SHADOW_SLB_ESID(num)(r11); \
+slb_exit_skip_ ## num:
+
+/******************************************************************************
+ *                                                                            *
+ *                               Entry code                                   *
+ *                                                                            *
+ *****************************************************************************/
+
+.global kvmppc_handler_trampoline_enter
+kvmppc_handler_trampoline_enter:
+
+	/* Required state:
+	 *
+	 * MSR = ~IR|DR
+	 * R13 = PACA
+	 * R9 = guest IP
+	 * R10 = guest MSR
+	 * R11 = free
+	 * R12 = free
+	 * PACA[PACA_EXMC + EX_R9] = guest R9
+	 * PACA[PACA_EXMC + EX_R10] = guest R10
+	 * PACA[PACA_EXMC + EX_R11] = guest R11
+	 * PACA[PACA_EXMC + EX_R12] = guest R12
+	 * PACA[PACA_EXMC + EX_R13] = guest R13
+	 * PACA[PACA_EXMC + EX_CCR] = guest CR
+	 * PACA[PACA_EXMC + EX_R3] = guest XER
+	 */
+
+	mtsrr0	r9
+	mtsrr1	r10
+
+	mtspr	SPRN_SPRG_SCRATCH0, r0
+
+	/* Remove LPAR shadow entries */
+
+#if SLB_NUM_BOLTED == 3
+
+	ld	r12, PACA_SLBSHADOWPTR(r13)
+
+	/* Save off the first entry so we can slbie it later */
+	ld	r10, SHADOW_SLB_ESID(0)(r12)
+	ld	r11, SHADOW_SLB_VSID(0)(r12)
+
+	/* Remove bolted entries */
+	UNBOLT_SLB_ENTRY(0)
+	UNBOLT_SLB_ENTRY(1)
+	UNBOLT_SLB_ENTRY(2)
+	
+#else
+#error unknown number of bolted entries
+#endif
+
+	/* Flush SLB */
+
+	slbia
+
+	/* r0 = esid & ESID_MASK */
+	rldicr  r10, r10, 0, 35
+	/* r0 |= CLASS_BIT(VSID) */
+	rldic   r12, r11, 56 - 36, 36
+	or      r10, r10, r12
+	slbie	r10
+
+	isync
+
+	/* Fill SLB with our shadow */
+
+	lbz	r12, PACA_KVM_SLB_MAX(r13)
+	mulli	r12, r12, 16
+	addi	r12, r12, PACA_KVM_SLB
+	add	r12, r12, r13
+
+	/* for (r11 = kvm_slb; r11 < kvm_slb + kvm_slb_size; r11+=slb_entry) */
+	li	r11, PACA_KVM_SLB
+	add	r11, r11, r13
+
+slb_loop_enter:
+
+	ld	r10, 0(r11)
+
+	rldicl. r0, r10, 37, 63
+	beq	slb_loop_enter_skip
+
+	ld	r9, 8(r11)
+	slbmte	r9, r10
+
+slb_loop_enter_skip:
+	addi	r11, r11, 16
+	cmpd	cr0, r11, r12
+	blt	slb_loop_enter
+
+slb_do_enter:
+
+	/* Enter guest */
+
+	mfspr	r0, SPRN_SPRG_SCRATCH0
+
+	ld	r9, (PACA_EXMC+EX_R9)(r13)
+	ld	r10, (PACA_EXMC+EX_R10)(r13)
+	ld	r12, (PACA_EXMC+EX_R12)(r13)
+
+	lwz	r11, (PACA_EXMC+EX_CCR)(r13)
+	mtcr	r11
+
+	ld	r11, (PACA_EXMC+EX_R3)(r13)
+	mtxer	r11
+
+	ld	r11, (PACA_EXMC+EX_R11)(r13)
+	ld	r13, (PACA_EXMC+EX_R13)(r13)
+
+	RFI
+kvmppc_handler_trampoline_enter_end:
+
+
+
+/******************************************************************************
+ *                                                                            *
+ *                               Exit code                                    *
+ *                                                                            *
+ *****************************************************************************/
+
+.global kvmppc_handler_trampoline_exit
+kvmppc_handler_trampoline_exit:
+
+	/* Register usage at this point:
+	 *
+	 * SPRG_SCRATCH0 = guest R13
+	 * R01           = host R1
+	 * R02           = host R2
+	 * R10           = guest PC
+	 * R11           = guest MSR
+	 * R12           = exit handler id
+	 * R13           = PACA
+	 * PACA.exmc.CCR  = guest CR
+	 * PACA.exmc.R9  = guest R1
+	 * PACA.exmc.R10 = guest R10
+	 * PACA.exmc.R11 = guest R11
+	 * PACA.exmc.R12 = guest R12
+	 * PACA.exmc.R13 = guest R2
+	 *
+	 */
+
+	/* Save registers */
+
+	std	r0, (PACA_EXMC+EX_SRR0)(r13)
+	std	r9, (PACA_EXMC+EX_R3)(r13)
+	std	r10, (PACA_EXMC+EX_LR)(r13)
+	std	r11, (PACA_EXMC+EX_DAR)(r13)
+
+	/*
+	 * In order for us to easily get the last instruction,
+	 * we got the #vmexit at, we exploit the fact that the
+	 * virtual layout is still the same here, so we can just
+	 * ld from the guest's PC address
+	 */
+
+	/* We only load the last instruction when it's safe */
+	cmpwi	r12, BOOK3S_INTERRUPT_DATA_STORAGE
+	beq	ld_last_inst
+	cmpwi	r12, BOOK3S_INTERRUPT_PROGRAM
+	beq	ld_last_inst
+
+	b	no_ld_last_inst
+
+ld_last_inst:
+	/* Save off the guest instruction we're at */
+	/*    1) enable paging for data */
+	mfmsr	r9
+	ori	r11, r9, MSR_DR			/* Enable paging for data */
+	mtmsr	r11
+	/*    2) fetch the instruction */
+	lwz	r0, 0(r10)
+	/*    3) disable paging again */
+	mtmsr	r9
+
+no_ld_last_inst:
+
+	/* Restore bolted entries from the shadow and fix it along the way */
+
+	/* We don't store anything in entry 0, so we don't need to take care of it */
+	slbia
+	isync
+
+#if SLB_NUM_BOLTED == 3
+
+	ld	r11, PACA_SLBSHADOWPTR(r13)
+
+	REBOLT_SLB_ENTRY(0)
+	REBOLT_SLB_ENTRY(1)
+	REBOLT_SLB_ENTRY(2)
+	
+#else
+#error unknown number of bolted entries
+#endif
+
+slb_do_exit:
+
+	/* Restore registers */
+
+	ld	r11, (PACA_EXMC+EX_DAR)(r13)
+	ld	r10, (PACA_EXMC+EX_LR)(r13)
+	ld	r9, (PACA_EXMC+EX_R3)(r13)
+
+	/* Save last inst */
+	stw	r0, (PACA_EXMC+EX_LR)(r13)
+
+	/* Save DAR and DSISR before going to paged mode */
+	mfdar	r0
+	std	r0, (PACA_EXMC+EX_DAR)(r13)
+	mfdsisr	r0
+	stw	r0, (PACA_EXMC+EX_DSISR)(r13)
+
+	/* RFI into the highmem handler */
+	mfmsr	r0
+	ori	r0, r0, MSR_IR|MSR_DR|MSR_RI	/* Enable paging */
+	mtsrr1	r0
+	ld	r0, PACASAVEDMSR(r13)		/* Highmem handler address */
+	mtsrr0	r0
+
+	mfspr	r0, SPRN_SPRG_SCRATCH0
+
+	RFI
+kvmppc_handler_trampoline_exit_end:
+
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index e7bf4d029484..06f5a9ecc42c 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -520,6 +520,11 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 	return kvmppc_core_vcpu_translate(vcpu, tr);
 }
 
+int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
+{
+	return -ENOTSUPP;
+}
+
 int __init kvmppc_booke_init(void)
 {
 	unsigned long ivor[16];
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 7737146af3fb..4a9ac6640fad 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -18,7 +18,7 @@
  */
 
 #include <linux/jiffies.h>
-#include <linux/timer.h>
+#include <linux/hrtimer.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/kvm_host.h>
@@ -32,6 +32,7 @@
 #include "trace.h"
 
 #define OP_TRAP 3
+#define OP_TRAP_64 2
 
 #define OP_31_XOP_LWZX      23
 #define OP_31_XOP_LBZX      87
@@ -64,19 +65,45 @@
 #define OP_STH  44
 #define OP_STHU 45
 
+#ifdef CONFIG_PPC64
+static int kvmppc_dec_enabled(struct kvm_vcpu *vcpu)
+{
+	return 1;
+}
+#else
+static int kvmppc_dec_enabled(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.tcr & TCR_DIE;
+}
+#endif
+
 void kvmppc_emulate_dec(struct kvm_vcpu *vcpu)
 {
-	if (vcpu->arch.tcr & TCR_DIE) {
+	unsigned long dec_nsec;
+
+	pr_debug("mtDEC: %x\n", vcpu->arch.dec);
+#ifdef CONFIG_PPC64
+	/* POWER4+ triggers a dec interrupt if the value is < 0 */
+	if (vcpu->arch.dec & 0x80000000) {
+		hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
+		kvmppc_core_queue_dec(vcpu);
+		return;
+	}
+#endif
+	if (kvmppc_dec_enabled(vcpu)) {
 		/* The decrementer ticks at the same rate as the timebase, so
 		 * that's how we convert the guest DEC value to the number of
 		 * host ticks. */
-		unsigned long nr_jiffies;
 
-		nr_jiffies = vcpu->arch.dec / tb_ticks_per_jiffy;
-		mod_timer(&vcpu->arch.dec_timer,
-		          get_jiffies_64() + nr_jiffies);
+		hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
+		dec_nsec = vcpu->arch.dec;
+		dec_nsec *= 1000;
+		dec_nsec /= tb_ticks_per_usec;
+		hrtimer_start(&vcpu->arch.dec_timer, ktime_set(0, dec_nsec),
+			      HRTIMER_MODE_REL);
+		vcpu->arch.dec_jiffies = get_tb();
 	} else {
-		del_timer(&vcpu->arch.dec_timer);
+		hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
 	}
 }
 
@@ -111,9 +138,15 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 	/* this default type might be overwritten by subcategories */
 	kvmppc_set_exit_type(vcpu, EMULATED_INST_EXITS);
 
+	pr_debug(KERN_INFO "Emulating opcode %d / %d\n", get_op(inst), get_xop(inst));
+
 	switch (get_op(inst)) {
 	case OP_TRAP:
+#ifdef CONFIG_PPC64
+	case OP_TRAP_64:
+#else
 		vcpu->arch.esr |= ESR_PTR;
+#endif
 		kvmppc_core_queue_program(vcpu);
 		advance = 0;
 		break;
@@ -188,17 +221,19 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			case SPRN_SRR1:
 				vcpu->arch.gpr[rt] = vcpu->arch.srr1; break;
 			case SPRN_PVR:
-				vcpu->arch.gpr[rt] = mfspr(SPRN_PVR); break;
+				vcpu->arch.gpr[rt] = vcpu->arch.pvr; break;
 			case SPRN_PIR:
-				vcpu->arch.gpr[rt] = mfspr(SPRN_PIR); break;
+				vcpu->arch.gpr[rt] = vcpu->vcpu_id; break;
+			case SPRN_MSSSR0:
+				vcpu->arch.gpr[rt] = 0; break;
 
 			/* Note: mftb and TBRL/TBWL are user-accessible, so
 			 * the guest can always access the real TB anyways.
 			 * In fact, we probably will never see these traps. */
 			case SPRN_TBWL:
-				vcpu->arch.gpr[rt] = mftbl(); break;
+				vcpu->arch.gpr[rt] = get_tb() >> 32; break;
 			case SPRN_TBWU:
-				vcpu->arch.gpr[rt] = mftbu(); break;
+				vcpu->arch.gpr[rt] = get_tb(); break;
 
 			case SPRN_SPRG0:
 				vcpu->arch.gpr[rt] = vcpu->arch.sprg0; break;
@@ -211,6 +246,13 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			/* Note: SPRG4-7 are user-readable, so we don't get
 			 * a trap. */
 
+			case SPRN_DEC:
+			{
+				u64 jd = get_tb() - vcpu->arch.dec_jiffies;
+				vcpu->arch.gpr[rt] = vcpu->arch.dec - jd;
+				pr_debug(KERN_INFO "mfDEC: %x - %llx = %lx\n", vcpu->arch.dec, jd, vcpu->arch.gpr[rt]);
+				break;
+			}
 			default:
 				emulated = kvmppc_core_emulate_mfspr(vcpu, sprn, rt);
 				if (emulated == EMULATE_FAIL) {
@@ -260,6 +302,8 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			case SPRN_TBWL: break;
 			case SPRN_TBWU: break;
 
+			case SPRN_MSSSR0: break;
+
 			case SPRN_DEC:
 				vcpu->arch.dec = vcpu->arch.gpr[rs];
 				kvmppc_emulate_dec(vcpu);
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 2a4551f78f60..f06cf93b178e 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -23,6 +23,7 @@
 #include <linux/kvm_host.h>
 #include <linux/module.h>
 #include <linux/vmalloc.h>
+#include <linux/hrtimer.h>
 #include <linux/fs.h>
 #include <asm/cputable.h>
 #include <asm/uaccess.h>
@@ -78,8 +79,9 @@ int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu)
 	return r;
 }
 
-void kvm_arch_hardware_enable(void *garbage)
+int kvm_arch_hardware_enable(void *garbage)
 {
+	return 0;
 }
 
 void kvm_arch_hardware_disable(void *garbage)
@@ -143,6 +145,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 	int r;
 
 	switch (ext) {
+	case KVM_CAP_PPC_SEGSTATE:
+		r = 1;
+		break;
 	case KVM_CAP_COALESCED_MMIO:
 		r = KVM_COALESCED_MMIO_PAGE_OFFSET;
 		break;
@@ -208,10 +213,25 @@ static void kvmppc_decrementer_func(unsigned long data)
 	}
 }
 
+/*
+ * low level hrtimer wake routine. Because this runs in hardirq context
+ * we schedule a tasklet to do the real work.
+ */
+enum hrtimer_restart kvmppc_decrementer_wakeup(struct hrtimer *timer)
+{
+	struct kvm_vcpu *vcpu;
+
+	vcpu = container_of(timer, struct kvm_vcpu, arch.dec_timer);
+	tasklet_schedule(&vcpu->arch.tasklet);
+
+	return HRTIMER_NORESTART;
+}
+
 int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 {
-	setup_timer(&vcpu->arch.dec_timer, kvmppc_decrementer_func,
-	            (unsigned long)vcpu);
+	hrtimer_init(&vcpu->arch.dec_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+	tasklet_init(&vcpu->arch.tasklet, kvmppc_decrementer_func, (ulong)vcpu);
+	vcpu->arch.dec_timer.function = kvmppc_decrementer_wakeup;
 
 	return 0;
 }
@@ -409,11 +429,6 @@ out:
 	return r;
 }
 
-int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
-{
-	return -ENOTSUPP;
-}
-
 long kvm_arch_vm_ioctl(struct file *filp,
                        unsigned int ioctl, unsigned long arg)
 {
@@ -421,7 +436,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 
 	switch (ioctl) {
 	default:
-		r = -EINVAL;
+		r = -ENOTTY;
 	}
 
 	return r;
diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c
index 2aa371e30079..70378551c0cc 100644
--- a/arch/powerpc/kvm/timing.c
+++ b/arch/powerpc/kvm/timing.c
@@ -23,6 +23,7 @@
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
 #include <linux/uaccess.h>
+#include <linux/module.h>
 
 #include <asm/time.h>
 #include <asm-generic/div64.h>
diff --git a/arch/powerpc/kvm/timing.h b/arch/powerpc/kvm/timing.h
index 806ef67868bd..8167d42a776f 100644
--- a/arch/powerpc/kvm/timing.h
+++ b/arch/powerpc/kvm/timing.h
@@ -51,7 +51,7 @@ static inline void kvmppc_account_exit_stat(struct kvm_vcpu *vcpu, int type)
 
 	/* The BUILD_BUG_ON below breaks in funny ways, commented out
 	 * for now ... -BenH
-	BUILD_BUG_ON(__builtin_constant_p(type));
+	BUILD_BUG_ON(!__builtin_constant_p(type));
 	*/
 	switch (type) {
 	case EXT_INTR_EXITS:
diff --git a/arch/powerpc/kvm/trace.h b/arch/powerpc/kvm/trace.h
index 67f219de0455..a8e840018052 100644
--- a/arch/powerpc/kvm/trace.h
+++ b/arch/powerpc/kvm/trace.h
@@ -12,8 +12,8 @@
  * Tracepoint for guest mode entry.
  */
 TRACE_EVENT(kvm_ppc_instr,
-	TP_PROTO(unsigned int inst, unsigned long pc, unsigned int emulate),
-	TP_ARGS(inst, pc, emulate),
+	TP_PROTO(unsigned int inst, unsigned long _pc, unsigned int emulate),
+	TP_ARGS(inst, _pc, emulate),
 
 	TP_STRUCT__entry(
 		__field(	unsigned int,	inst		)
@@ -23,7 +23,7 @@ TRACE_EVENT(kvm_ppc_instr,
 
 	TP_fast_assign(
 		__entry->inst		= inst;
-		__entry->pc		= pc;
+		__entry->pc		= _pc;
 		__entry->emulate	= emulate;
 	),
 
diff --git a/arch/powerpc/lib/copy_32.S b/arch/powerpc/lib/copy_32.S
index c657de59abca..74a7f4130b4c 100644
--- a/arch/powerpc/lib/copy_32.S
+++ b/arch/powerpc/lib/copy_32.S
@@ -98,20 +98,7 @@ _GLOBAL(cacheable_memzero)
 	bdnz	4b
 3:	mtctr	r9
 	li	r7,4
-#if !defined(CONFIG_8xx)
 10:	dcbz	r7,r6
-#else
-10:	stw	r4, 4(r6)
-	stw	r4, 8(r6)
-	stw	r4, 12(r6)
-	stw	r4, 16(r6)
-#if CACHE_LINE_SIZE >= 32
-	stw	r4, 20(r6)
-	stw	r4, 24(r6)
-	stw	r4, 28(r6)
-	stw	r4, 32(r6)
-#endif /* CACHE_LINE_SIZE */
-#endif
 	addi	r6,r6,CACHELINE_BYTES
 	bdnz	10b
 	clrlwi	r5,r8,32-LG_CACHELINE_BYTES
@@ -200,9 +187,7 @@ _GLOBAL(cacheable_memcpy)
 	mtctr	r0
 	beq	63f
 53:
-#if !defined(CONFIG_8xx)
 	dcbz	r11,r6
-#endif
 	COPY_16_BYTES
 #if L1_CACHE_BYTES >= 32
 	COPY_16_BYTES
@@ -356,14 +341,6 @@ _GLOBAL(__copy_tofrom_user)
 	li	r11,4
 	beq	63f
 
-#ifdef CONFIG_8xx
-	/* Don't use prefetch on 8xx */
-	mtctr	r0
-	li	r0,0
-53:	COPY_16_BYTES_WITHEX(0)
-	bdnz	53b
-
-#else /* not CONFIG_8xx */
 	/* Here we decide how far ahead to prefetch the source */
 	li	r3,4
 	cmpwi	r0,1
@@ -416,7 +393,6 @@ _GLOBAL(__copy_tofrom_user)
 	li	r3,4
 	li	r7,0
 	bne	114b
-#endif /* CONFIG_8xx */
 
 63:	srwi.	r0,r5,2
 	mtctr	r0
diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S
index 75f3267fdc30..e68beac0a171 100644
--- a/arch/powerpc/lib/copypage_64.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -26,11 +26,11 @@ BEGIN_FTR_SECTION
 	srd	r8,r5,r11
 
 	mtctr	r8
-setup:
+.Lsetup:
 	dcbt	r9,r4
 	dcbz	r9,r3
 	add	r9,r9,r12
-	bdnz	setup
+	bdnz	.Lsetup
 END_FTR_SECTION_IFSET(CPU_FTR_CP_USE_DCBTZ)
 	addi	r3,r3,-8
 	srdi    r8,r5,7		/* page is copied in 128 byte strides */
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 6fb8fc8d2fea..ce68708bbad5 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -28,7 +28,10 @@ obj-$(CONFIG_44x)		+= 44x_mmu.o
 obj-$(CONFIG_FSL_BOOKE)		+= fsl_booke_mmu.o
 obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
 obj-$(CONFIG_PPC_MM_SLICES)	+= slice.o
-obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
+ifeq ($(CONFIG_HUGETLB_PAGE),y)
+obj-y				+= hugetlbpage.o
+obj-$(CONFIG_PPC_STD_MMU_64)	+= hugetlbpage-hash64.o
+endif
 obj-$(CONFIG_PPC_SUBPAGE_PROT)	+= subpage-prot.o
 obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index e7dae82c1285..26fb6b990b0a 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -40,7 +40,7 @@
 #include <asm/uaccess.h>
 #include <asm/tlbflush.h>
 #include <asm/siginfo.h>
-
+#include <mm/mmu_decl.h>
 
 #ifdef CONFIG_KPROBES
 static inline int notify_page_fault(struct pt_regs *regs)
@@ -246,6 +246,12 @@ good_area:
 		goto bad_area;
 #endif /* CONFIG_6xx */
 #if defined(CONFIG_8xx)
+	/* 8xx sometimes need to load a invalid/non-present TLBs.
+	 * These must be invalidated separately as linux mm don't.
+	 */
+	if (error_code & 0x40000000) /* no translation? */
+		_tlbil_va(address, 0, 0, 0);
+
         /* The MPC8xx seems to always set 0x80000000, which is
          * "undefined".  Of those that can be set, this is the only
          * one which seems bad.
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index dc93e95b256e..fcfcb6e976c7 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -54,26 +54,35 @@
 
 #include "mmu_decl.h"
 
-extern void loadcam_entry(unsigned int index);
 unsigned int tlbcam_index;
-static unsigned long cam[CONFIG_LOWMEM_CAM_NUM];
 
-#define NUM_TLBCAMS	(16)
+#define NUM_TLBCAMS	(64)
 
 #if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
 #error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS"
 #endif
 
-struct tlbcam TLBCAM[NUM_TLBCAMS];
+struct tlbcam {
+	u32	MAS0;
+	u32	MAS1;
+	unsigned long	MAS2;
+	u32	MAS3;
+	u32	MAS7;
+} TLBCAM[NUM_TLBCAMS];
 
 struct tlbcamrange {
-   	unsigned long start;
+	unsigned long start;
 	unsigned long limit;
 	phys_addr_t phys;
 } tlbcam_addrs[NUM_TLBCAMS];
 
 extern unsigned int tlbcam_index;
 
+unsigned long tlbcam_sz(int idx)
+{
+	return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1;
+}
+
 /*
  * Return PA for this VA if it is mapped by a CAM, or 0
  */
@@ -94,23 +103,36 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa)
 	int b;
 	for (b = 0; b < tlbcam_index; ++b)
 		if (pa >= tlbcam_addrs[b].phys
-	    	    && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
+			&& pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
 		              +tlbcam_addrs[b].phys)
 			return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys);
 	return 0;
 }
 
+void loadcam_entry(int idx)
+{
+	mtspr(SPRN_MAS0, TLBCAM[idx].MAS0);
+	mtspr(SPRN_MAS1, TLBCAM[idx].MAS1);
+	mtspr(SPRN_MAS2, TLBCAM[idx].MAS2);
+	mtspr(SPRN_MAS3, TLBCAM[idx].MAS3);
+
+	if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
+		mtspr(SPRN_MAS7, TLBCAM[idx].MAS7);
+
+	asm volatile("isync;tlbwe;isync" : : : "memory");
+}
+
 /*
  * Set up one of the I/D BAT (block address translation) register pairs.
  * The parameters are not checked; in particular size must be a power
  * of 4 between 4k and 256M.
  */
-void settlbcam(int index, unsigned long virt, phys_addr_t phys,
-		unsigned int size, int flags, unsigned int pid)
+static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
+		unsigned long size, unsigned long flags, unsigned int pid)
 {
 	unsigned int tsize, lz;
 
-	asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
+	asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (size));
 	tsize = 21 - lz;
 
 #ifdef CONFIG_SMP
@@ -128,8 +150,10 @@ void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 	TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0;
 	TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0;
 
-	TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR;
+	TLBCAM[index].MAS3 = (phys & MAS3_RPN) | MAS3_SX | MAS3_SR;
 	TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0);
+	if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
+		TLBCAM[index].MAS7 = (u64)phys >> 32;
 
 #ifndef CONFIG_KGDB /* want user access for breakpoints */
 	if (flags & _PAGE_USER) {
@@ -148,27 +172,44 @@ void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 	loadcam_entry(index);
 }
 
-void invalidate_tlbcam_entry(int index)
-{
-	TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index);
-	TLBCAM[index].MAS1 = ~MAS1_VALID;
-
-	loadcam_entry(index);
-}
-
-unsigned long __init mmu_mapin_ram(void)
+unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
 {
+	int i;
 	unsigned long virt = PAGE_OFFSET;
 	phys_addr_t phys = memstart_addr;
+	unsigned long amount_mapped = 0;
+	unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
+
+	/* Convert (4^max) kB to (2^max) bytes */
+	max_cam = max_cam * 2 + 10;
 
-	while (tlbcam_index < ARRAY_SIZE(cam) && cam[tlbcam_index]) {
-		settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], PAGE_KERNEL_X, 0);
-		virt += cam[tlbcam_index];
-		phys += cam[tlbcam_index];
-		tlbcam_index++;
+	/* Calculate CAM values */
+	for (i = 0; ram && i < max_cam_idx; i++) {
+		unsigned int camsize = __ilog2(ram) & ~1U;
+		unsigned int align = __ffs(virt | phys) & ~1U;
+		unsigned long cam_sz;
+
+		if (camsize > align)
+			camsize = align;
+		if (camsize > max_cam)
+			camsize = max_cam;
+
+		cam_sz = 1UL << camsize;
+		settlbcam(i, virt, phys, cam_sz, PAGE_KERNEL_X, 0);
+
+		ram -= cam_sz;
+		amount_mapped += cam_sz;
+		virt += cam_sz;
+		phys += cam_sz;
 	}
+	tlbcam_index = i;
+
+	return amount_mapped;
+}
 
-	return virt - PAGE_OFFSET;
+unsigned long __init mmu_mapin_ram(void)
+{
+	return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1;
 }
 
 /*
@@ -179,46 +220,21 @@ void __init MMU_init_hw(void)
 	flush_instruction_cache();
 }
 
-void __init
-adjust_total_lowmem(void)
+void __init adjust_total_lowmem(void)
 {
-	phys_addr_t ram;
-	unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xff;
-	char buf[ARRAY_SIZE(cam) * 5 + 1], *p = buf;
+	unsigned long ram;
 	int i;
-	unsigned long virt = PAGE_OFFSET & 0xffffffffUL;
-	unsigned long phys = memstart_addr & 0xffffffffUL;
-
-	/* Convert (4^max) kB to (2^max) bytes */
-	max_cam = max_cam * 2 + 10;
 
 	/* adjust lowmem size to __max_low_memory */
 	ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
 
-	/* Calculate CAM values */
-	__max_low_memory = 0;
-	for (i = 0; ram && i < ARRAY_SIZE(cam); i++) {
-		unsigned int camsize = __ilog2(ram) & ~1U;
-		unsigned int align = __ffs(virt | phys) & ~1U;
+	__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM);
 
-		if (camsize > align)
-			camsize = align;
-		if (camsize > max_cam)
-			camsize = max_cam;
-
-		cam[i] = 1UL << camsize;
-		ram -= cam[i];
-		__max_low_memory += cam[i];
-		virt += cam[i];
-		phys += cam[i];
-
-		p += sprintf(p, "%lu/", cam[i] >> 20);
-	}
-	for (; i < ARRAY_SIZE(cam); i++)
-		p += sprintf(p, "0/");
-	p[-1] = '\0';
-
-	pr_info("Memory CAM mapping: %s Mb, residual: %dMb\n", buf,
+	pr_info("Memory CAM mapping: ");
+	for (i = 0; i < tlbcam_index - 1; i++)
+		pr_cont("%lu/", tlbcam_sz(i) >> 20);
+	pr_cont("%lu Mb, residual: %dMb\n", tlbcam_sz(tlbcam_index - 1) >> 20,
 	        (unsigned int)((total_lowmem - __max_low_memory) >> 20));
+
 	__initial_memory_limit_addr = memstart_addr + __max_low_memory;
 }
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index bc122a120bf0..d7efdbf640c7 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -55,57 +55,6 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
 	return 1;
 }
 
-#ifdef CONFIG_HUGETLB_PAGE
-static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate,
-				 unsigned long *addr, unsigned long end,
-				 int write, struct page **pages, int *nr)
-{
-	unsigned long mask;
-	unsigned long pte_end;
-	struct page *head, *page;
-	pte_t pte;
-	int refs;
-
-	pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate);
-	if (pte_end < end)
-		end = pte_end;
-
-	pte = *ptep;
-	mask = _PAGE_PRESENT|_PAGE_USER;
-	if (write)
-		mask |= _PAGE_RW;
-	if ((pte_val(pte) & mask) != mask)
-		return 0;
-	/* hugepages are never "special" */
-	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
-
-	refs = 0;
-	head = pte_page(pte);
-	page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT);
-	do {
-		VM_BUG_ON(compound_head(page) != head);
-		pages[*nr] = page;
-		(*nr)++;
-		page++;
-		refs++;
-	} while (*addr += PAGE_SIZE, *addr != end);
-
-	if (!page_cache_add_speculative(head, refs)) {
-		*nr -= refs;
-		return 0;
-	}
-	if (unlikely(pte_val(pte) != pte_val(*ptep))) {
-		/* Could be optimized better */
-		while (*nr) {
-			put_page(page);
-			(*nr)--;
-		}
-	}
-
-	return 1;
-}
-#endif /* CONFIG_HUGETLB_PAGE */
-
 static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
 		int write, struct page **pages, int *nr)
 {
@@ -119,7 +68,11 @@ static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
 		next = pmd_addr_end(addr, end);
 		if (pmd_none(pmd))
 			return 0;
-		if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+		if (is_hugepd(pmdp)) {
+			if (!gup_hugepd((hugepd_t *)pmdp, PMD_SHIFT,
+					addr, next, write, pages, nr))
+				return 0;
+		} else if (!gup_pte_range(pmd, addr, next, write, pages, nr))
 			return 0;
 	} while (pmdp++, addr = next, addr != end);
 
@@ -139,7 +92,11 @@ static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
 		next = pud_addr_end(addr, end);
 		if (pud_none(pud))
 			return 0;
-		if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+		if (is_hugepd(pudp)) {
+			if (!gup_hugepd((hugepd_t *)pudp, PUD_SHIFT,
+					addr, next, write, pages, nr))
+				return 0;
+		} else if (!gup_pmd_range(pud, addr, next, write, pages, nr))
 			return 0;
 	} while (pudp++, addr = next, addr != end);
 
@@ -154,10 +111,6 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 	unsigned long next;
 	pgd_t *pgdp;
 	int nr = 0;
-#ifdef CONFIG_PPC64
-	unsigned int shift;
-	int psize;
-#endif
 
 	pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
 
@@ -172,25 +125,6 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 
 	pr_devel("  aligned: %lx .. %lx\n", start, end);
 
-#ifdef CONFIG_HUGETLB_PAGE
-	/* We bail out on slice boundary crossing when hugetlb is
-	 * enabled in order to not have to deal with two different
-	 * page table formats
-	 */
-	if (addr < SLICE_LOW_TOP) {
-		if (end > SLICE_LOW_TOP)
-			goto slow_irqon;
-
-		if (unlikely(GET_LOW_SLICE_INDEX(addr) !=
-			     GET_LOW_SLICE_INDEX(end - 1)))
-			goto slow_irqon;
-	} else {
-		if (unlikely(GET_HIGH_SLICE_INDEX(addr) !=
-			     GET_HIGH_SLICE_INDEX(end - 1)))
-			goto slow_irqon;
-	}
-#endif /* CONFIG_HUGETLB_PAGE */
-
 	/*
 	 * XXX: batch / limit 'nr', to avoid large irq off latency
 	 * needs some instrumenting to determine the common sizes used by
@@ -210,54 +144,23 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 	 */
 	local_irq_disable();
 
-#ifdef CONFIG_PPC64
-	/* Those bits are related to hugetlbfs implementation and only exist
-	 * on 64-bit for now
-	 */
-	psize = get_slice_psize(mm, addr);
-	shift = mmu_psize_defs[psize].shift;
-#endif /* CONFIG_PPC64 */
-
-#ifdef CONFIG_HUGETLB_PAGE
-	if (unlikely(mmu_huge_psizes[psize])) {
-		pte_t *ptep;
-		unsigned long a = addr;
-		unsigned long sz = ((1UL) << shift);
-		struct hstate *hstate = size_to_hstate(sz);
-
-		BUG_ON(!hstate);
-		/*
-		 * XXX: could be optimized to avoid hstate
-		 * lookup entirely (just use shift)
-		 */
-
-		do {
-			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
-			ptep = huge_pte_offset(mm, a);
-			pr_devel(" %016lx: huge ptep %p\n", a, ptep);
-			if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
-						   &nr))
-				goto slow;
-		} while (a != end);
-	} else
-#endif /* CONFIG_HUGETLB_PAGE */
-	{
-		pgdp = pgd_offset(mm, addr);
-		do {
-			pgd_t pgd = *pgdp;
-
-#ifdef CONFIG_PPC64
-			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
-#endif
-			pr_devel("  %016lx: normal pgd %p\n", addr,
-				 (void *)pgd_val(pgd));
-			next = pgd_addr_end(addr, end);
-			if (pgd_none(pgd))
-				goto slow;
-			if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+	pgdp = pgd_offset(mm, addr);
+	do {
+		pgd_t pgd = *pgdp;
+
+		pr_devel("  %016lx: normal pgd %p\n", addr,
+			 (void *)pgd_val(pgd));
+		next = pgd_addr_end(addr, end);
+		if (pgd_none(pgd))
+			goto slow;
+		if (is_hugepd(pgdp)) {
+			if (!gup_hugepd((hugepd_t *)pgdp, PGDIR_SHIFT,
+					addr, next, write, pages, &nr))
 				goto slow;
-		} while (pgdp++, addr = next, addr != end);
-	}
+		} else if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+			goto slow;
+	} while (pgdp++, addr = next, addr != end);
+
 	local_irq_enable();
 
 	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 1ade7eb6ae00..50f867d657df 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -92,6 +92,7 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
 struct hash_pte *htab_address;
 unsigned long htab_size_bytes;
 unsigned long htab_hash_mask;
+EXPORT_SYMBOL_GPL(htab_hash_mask);
 int mmu_linear_psize = MMU_PAGE_4K;
 int mmu_virtual_psize = MMU_PAGE_4K;
 int mmu_vmalloc_psize = MMU_PAGE_4K;
@@ -102,6 +103,7 @@ int mmu_io_psize = MMU_PAGE_4K;
 int mmu_kernel_ssize = MMU_SEGSIZE_256M;
 int mmu_highuser_ssize = MMU_SEGSIZE_256M;
 u16 mmu_slb_size = 64;
+EXPORT_SYMBOL_GPL(mmu_slb_size);
 #ifdef CONFIG_HUGETLB_PAGE
 unsigned int HPAGE_SHIFT;
 #endif
@@ -481,16 +483,6 @@ static void __init htab_init_page_sizes(void)
 #ifdef CONFIG_HUGETLB_PAGE
 	/* Reserve 16G huge page memory sections for huge pages */
 	of_scan_flat_dt(htab_dt_scan_hugepage_blocks, NULL);
-
-/* Set default large page size. Currently, we pick 16M or 1M depending
-	 * on what is available
-	 */
-	if (mmu_psize_defs[MMU_PAGE_16M].shift)
-		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift;
-	/* With 4k/4level pagetables, we can't (for now) cope with a
-	 * huge page size < PMD_SIZE */
-	else if (mmu_psize_defs[MMU_PAGE_1M].shift)
-		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift;
 #endif /* CONFIG_HUGETLB_PAGE */
 }
 
@@ -785,7 +777,7 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
 	/* page is dirty */
 	if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
 		if (trap == 0x400) {
-			__flush_dcache_icache(page_address(page));
+			flush_dcache_icache_page(page);
 			set_bit(PG_arch_1, &page->flags);
 		} else
 			pp |= HPTE_R_N;
@@ -843,9 +835,9 @@ void demote_segment_4k(struct mm_struct *mm, unsigned long addr)
  * Result is 0: full permissions, _PAGE_RW: read-only,
  * _PAGE_USER or _PAGE_USER|_PAGE_RW: no access.
  */
-static int subpage_protection(pgd_t *pgdir, unsigned long ea)
+static int subpage_protection(struct mm_struct *mm, unsigned long ea)
 {
-	struct subpage_prot_table *spt = pgd_subpage_prot(pgdir);
+	struct subpage_prot_table *spt = &mm->context.spt;
 	u32 spp = 0;
 	u32 **sbpm, *sbpp;
 
@@ -873,7 +865,7 @@ static int subpage_protection(pgd_t *pgdir, unsigned long ea)
 }
 
 #else /* CONFIG_PPC_SUBPAGE_PROT */
-static inline int subpage_protection(pgd_t *pgdir, unsigned long ea)
+static inline int subpage_protection(struct mm_struct *mm, unsigned long ea)
 {
 	return 0;
 }
@@ -891,6 +883,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 	unsigned long vsid;
 	struct mm_struct *mm;
 	pte_t *ptep;
+	unsigned hugeshift;
 	const struct cpumask *tmp;
 	int rc, user_region = 0, local = 0;
 	int psize, ssize;
@@ -943,30 +936,31 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 	if (user_region && cpumask_equal(mm_cpumask(mm), tmp))
 		local = 1;
 
-#ifdef CONFIG_HUGETLB_PAGE
-	/* Handle hugepage regions */
-	if (HPAGE_SHIFT && mmu_huge_psizes[psize]) {
-		DBG_LOW(" -> huge page !\n");
-		return hash_huge_page(mm, access, ea, vsid, local, trap);
-	}
-#endif /* CONFIG_HUGETLB_PAGE */
-
 #ifndef CONFIG_PPC_64K_PAGES
-	/* If we use 4K pages and our psize is not 4K, then we are hitting
-	 * a special driver mapping, we need to align the address before
-	 * we fetch the PTE
+	/* If we use 4K pages and our psize is not 4K, then we might
+	 * be hitting a special driver mapping, and need to align the
+	 * address before we fetch the PTE.
+	 *
+	 * It could also be a hugepage mapping, in which case this is
+	 * not necessary, but it's not harmful, either.
 	 */
 	if (psize != MMU_PAGE_4K)
 		ea &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
 #endif /* CONFIG_PPC_64K_PAGES */
 
 	/* Get PTE and page size from page tables */
-	ptep = find_linux_pte(pgdir, ea);
+	ptep = find_linux_pte_or_hugepte(pgdir, ea, &hugeshift);
 	if (ptep == NULL || !pte_present(*ptep)) {
 		DBG_LOW(" no PTE !\n");
 		return 1;
 	}
 
+#ifdef CONFIG_HUGETLB_PAGE
+	if (hugeshift)
+		return __hash_page_huge(ea, access, vsid, ptep, trap, local,
+					ssize, hugeshift, psize);
+#endif /* CONFIG_HUGETLB_PAGE */
+
 #ifndef CONFIG_PPC_64K_PAGES
 	DBG_LOW(" i-pte: %016lx\n", pte_val(*ptep));
 #else
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
new file mode 100644
index 000000000000..199539882f92
--- /dev/null
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -0,0 +1,139 @@
+/*
+ * PPC64 Huge TLB Page Support for hash based MMUs (POWER4 and later)
+ *
+ * Copyright (C) 2003 David Gibson, IBM Corporation.
+ *
+ * Based on the IA-32 version:
+ * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
+ */
+
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/machdep.h>
+
+int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
+		     pte_t *ptep, unsigned long trap, int local, int ssize,
+		     unsigned int shift, unsigned int mmu_psize)
+{
+	unsigned long old_pte, new_pte;
+	unsigned long va, rflags, pa, sz;
+	long slot;
+	int err = 1;
+
+	BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
+
+	/* Search the Linux page table for a match with va */
+	va = hpt_va(ea, vsid, ssize);
+
+	/*
+	 * Check the user's access rights to the page.  If access should be
+	 * prevented then send the problem up to do_page_fault.
+	 */
+	if (unlikely(access & ~pte_val(*ptep)))
+		goto out;
+	/*
+	 * At this point, we have a pte (old_pte) which can be used to build
+	 * or update an HPTE. There are 2 cases:
+	 *
+	 * 1. There is a valid (present) pte with no associated HPTE (this is
+	 *	the most common case)
+	 * 2. There is a valid (present) pte with an associated HPTE. The
+	 *	current values of the pp bits in the HPTE prevent access
+	 *	because we are doing software DIRTY bit management and the
+	 *	page is currently not DIRTY.
+	 */
+
+
+	do {
+		old_pte = pte_val(*ptep);
+		if (old_pte & _PAGE_BUSY)
+			goto out;
+		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
+	} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
+					 old_pte, new_pte));
+
+	rflags = 0x2 | (!(new_pte & _PAGE_RW));
+	/* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
+	rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
+	sz = ((1UL) << shift);
+	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+		/* No CPU has hugepages but lacks no execute, so we
+		 * don't need to worry about that case */
+		rflags = hash_page_do_lazy_icache(rflags, __pte(old_pte), trap);
+
+	/* Check if pte already has an hpte (case 2) */
+	if (unlikely(old_pte & _PAGE_HASHPTE)) {
+		/* There MIGHT be an HPTE for this pte */
+		unsigned long hash, slot;
+
+		hash = hpt_hash(va, shift, ssize);
+		if (old_pte & _PAGE_F_SECOND)
+			hash = ~hash;
+		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
+		slot += (old_pte & _PAGE_F_GIX) >> 12;
+
+		if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize,
+					 ssize, local) == -1)
+			old_pte &= ~_PAGE_HPTEFLAGS;
+	}
+
+	if (likely(!(old_pte & _PAGE_HASHPTE))) {
+		unsigned long hash = hpt_hash(va, shift, ssize);
+		unsigned long hpte_group;
+
+		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
+
+repeat:
+		hpte_group = ((hash & htab_hash_mask) *
+			      HPTES_PER_GROUP) & ~0x7UL;
+
+		/* clear HPTE slot informations in new PTE */
+#ifdef CONFIG_PPC_64K_PAGES
+		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0;
+#else
+		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
+#endif
+		/* Add in WIMG bits */
+		rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
+				      _PAGE_COHERENT | _PAGE_GUARDED));
+
+		/* Insert into the hash table, primary slot */
+		slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
+					  mmu_psize, ssize);
+
+		/* Primary is full, try the secondary */
+		if (unlikely(slot == -1)) {
+			hpte_group = ((~hash & htab_hash_mask) *
+				      HPTES_PER_GROUP) & ~0x7UL;
+			slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
+						  HPTE_V_SECONDARY,
+						  mmu_psize, ssize);
+			if (slot == -1) {
+				if (mftb() & 0x1)
+					hpte_group = ((hash & htab_hash_mask) *
+						      HPTES_PER_GROUP)&~0x7UL;
+
+				ppc_md.hpte_remove(hpte_group);
+				goto repeat;
+                        }
+		}
+
+		if (unlikely(slot == -2))
+			panic("hash_huge_page: pte_insert failed\n");
+
+		new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
+	}
+
+	/*
+	 * No need to use ldarx/stdcx here
+	 */
+	*ptep = __pte(new_pte & ~_PAGE_BUSY);
+
+	err = 0;
+
+ out:
+	return err;
+}
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 90df6ffe3a43..123f7070238a 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -7,29 +7,17 @@
  * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
  */
 
-#include <linux/init.h>
-#include <linux/fs.h>
 #include <linux/mm.h>
+#include <linux/io.h>
 #include <linux/hugetlb.h>
-#include <linux/pagemap.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/sysctl.h>
-#include <asm/mman.h>
+#include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/tlb.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu_context.h>
-#include <asm/machdep.h>
-#include <asm/cputable.h>
-#include <asm/spu.h>
 
 #define PAGE_SHIFT_64K	16
 #define PAGE_SHIFT_16M	24
 #define PAGE_SHIFT_16G	34
 
-#define NUM_LOW_AREAS	(0x100000000UL >> SID_SHIFT)
-#define NUM_HIGH_AREAS	(PGTABLE_RANGE >> HTLB_AREA_SHIFT)
 #define MAX_NUMBER_GPAGES	1024
 
 /* Tracks the 16G pages after the device tree is scanned and before the
@@ -37,53 +25,17 @@
 static unsigned long gpage_freearray[MAX_NUMBER_GPAGES];
 static unsigned nr_gpages;
 
-/* Array of valid huge page sizes - non-zero value(hugepte_shift) is
- * stored for the huge page sizes that are valid.
- */
-unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */
-
-#define hugepte_shift			mmu_huge_psizes
-#define PTRS_PER_HUGEPTE(psize)		(1 << hugepte_shift[psize])
-#define HUGEPTE_TABLE_SIZE(psize)	(sizeof(pte_t) << hugepte_shift[psize])
-
-#define HUGEPD_SHIFT(psize)		(mmu_psize_to_shift(psize) \
-						+ hugepte_shift[psize])
-#define HUGEPD_SIZE(psize)		(1UL << HUGEPD_SHIFT(psize))
-#define HUGEPD_MASK(psize)		(~(HUGEPD_SIZE(psize)-1))
-
-/* Subtract one from array size because we don't need a cache for 4K since
- * is not a huge page size */
-#define HUGE_PGTABLE_INDEX(psize)	(HUGEPTE_CACHE_NUM + psize - 1)
-#define HUGEPTE_CACHE_NAME(psize)	(huge_pgtable_cache_name[psize])
-
-static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = {
-	[MMU_PAGE_64K]	= "hugepte_cache_64K",
-	[MMU_PAGE_1M]	= "hugepte_cache_1M",
-	[MMU_PAGE_16M]	= "hugepte_cache_16M",
-	[MMU_PAGE_16G]	= "hugepte_cache_16G",
-};
-
 /* Flag to mark huge PD pointers.  This means pmd_bad() and pud_bad()
  * will choke on pointers to hugepte tables, which is handy for
  * catching screwups early. */
-#define HUGEPD_OK	0x1
-
-typedef struct { unsigned long pd; } hugepd_t;
-
-#define hugepd_none(hpd)	((hpd).pd == 0)
 
 static inline int shift_to_mmu_psize(unsigned int shift)
 {
-	switch (shift) {
-#ifndef CONFIG_PPC_64K_PAGES
-	case PAGE_SHIFT_64K:
-	    return MMU_PAGE_64K;
-#endif
-	case PAGE_SHIFT_16M:
-	    return MMU_PAGE_16M;
-	case PAGE_SHIFT_16G:
-	    return MMU_PAGE_16G;
-	}
+	int psize;
+
+	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize)
+		if (mmu_psize_defs[psize].shift == shift)
+			return psize;
 	return -1;
 }
 
@@ -94,71 +46,126 @@ static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize)
 	BUG();
 }
 
+#define hugepd_none(hpd)	((hpd).pd == 0)
+
 static inline pte_t *hugepd_page(hugepd_t hpd)
 {
-	BUG_ON(!(hpd.pd & HUGEPD_OK));
-	return (pte_t *)(hpd.pd & ~HUGEPD_OK);
+	BUG_ON(!hugepd_ok(hpd));
+	return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | 0xc000000000000000);
+}
+
+static inline unsigned int hugepd_shift(hugepd_t hpd)
+{
+	return hpd.pd & HUGEPD_SHIFT_MASK;
 }
 
-static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
-				    struct hstate *hstate)
+static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, unsigned pdshift)
 {
-	unsigned int shift = huge_page_shift(hstate);
-	int psize = shift_to_mmu_psize(shift);
-	unsigned long idx = ((addr >> shift) & (PTRS_PER_HUGEPTE(psize)-1));
+	unsigned long idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp);
 	pte_t *dir = hugepd_page(*hpdp);
 
 	return dir + idx;
 }
 
+pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
+{
+	pgd_t *pg;
+	pud_t *pu;
+	pmd_t *pm;
+	hugepd_t *hpdp = NULL;
+	unsigned pdshift = PGDIR_SHIFT;
+
+	if (shift)
+		*shift = 0;
+
+	pg = pgdir + pgd_index(ea);
+	if (is_hugepd(pg)) {
+		hpdp = (hugepd_t *)pg;
+	} else if (!pgd_none(*pg)) {
+		pdshift = PUD_SHIFT;
+		pu = pud_offset(pg, ea);
+		if (is_hugepd(pu))
+			hpdp = (hugepd_t *)pu;
+		else if (!pud_none(*pu)) {
+			pdshift = PMD_SHIFT;
+			pm = pmd_offset(pu, ea);
+			if (is_hugepd(pm))
+				hpdp = (hugepd_t *)pm;
+			else if (!pmd_none(*pm)) {
+				return pte_offset_map(pm, ea);
+			}
+		}
+	}
+
+	if (!hpdp)
+		return NULL;
+
+	if (shift)
+		*shift = hugepd_shift(*hpdp);
+	return hugepte_offset(hpdp, ea, pdshift);
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
+{
+	return find_linux_pte_or_hugepte(mm->pgd, addr, NULL);
+}
+
 static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
-			   unsigned long address, unsigned int psize)
+			   unsigned long address, unsigned pdshift, unsigned pshift)
 {
-	pte_t *new = kmem_cache_zalloc(pgtable_cache[HUGE_PGTABLE_INDEX(psize)],
-				      GFP_KERNEL|__GFP_REPEAT);
+	pte_t *new = kmem_cache_zalloc(PGT_CACHE(pdshift - pshift),
+				       GFP_KERNEL|__GFP_REPEAT);
+
+	BUG_ON(pshift > HUGEPD_SHIFT_MASK);
+	BUG_ON((unsigned long)new & HUGEPD_SHIFT_MASK);
 
 	if (! new)
 		return -ENOMEM;
 
 	spin_lock(&mm->page_table_lock);
 	if (!hugepd_none(*hpdp))
-		kmem_cache_free(pgtable_cache[HUGE_PGTABLE_INDEX(psize)], new);
+		kmem_cache_free(PGT_CACHE(pdshift - pshift), new);
 	else
-		hpdp->pd = (unsigned long)new | HUGEPD_OK;
+		hpdp->pd = ((unsigned long)new & ~0x8000000000000000) | pshift;
 	spin_unlock(&mm->page_table_lock);
 	return 0;
 }
 
-
-static pud_t *hpud_offset(pgd_t *pgd, unsigned long addr, struct hstate *hstate)
-{
-	if (huge_page_shift(hstate) < PUD_SHIFT)
-		return pud_offset(pgd, addr);
-	else
-		return (pud_t *) pgd;
-}
-static pud_t *hpud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long addr,
-			 struct hstate *hstate)
+pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
 {
-	if (huge_page_shift(hstate) < PUD_SHIFT)
-		return pud_alloc(mm, pgd, addr);
-	else
-		return (pud_t *) pgd;
-}
-static pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate)
-{
-	if (huge_page_shift(hstate) < PMD_SHIFT)
-		return pmd_offset(pud, addr);
-	else
-		return (pmd_t *) pud;
-}
-static pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr,
-			 struct hstate *hstate)
-{
-	if (huge_page_shift(hstate) < PMD_SHIFT)
-		return pmd_alloc(mm, pud, addr);
-	else
-		return (pmd_t *) pud;
+	pgd_t *pg;
+	pud_t *pu;
+	pmd_t *pm;
+	hugepd_t *hpdp = NULL;
+	unsigned pshift = __ffs(sz);
+	unsigned pdshift = PGDIR_SHIFT;
+
+	addr &= ~(sz-1);
+
+	pg = pgd_offset(mm, addr);
+	if (pshift >= PUD_SHIFT) {
+		hpdp = (hugepd_t *)pg;
+	} else {
+		pdshift = PUD_SHIFT;
+		pu = pud_alloc(mm, pg, addr);
+		if (pshift >= PMD_SHIFT) {
+			hpdp = (hugepd_t *)pu;
+		} else {
+			pdshift = PMD_SHIFT;
+			pm = pmd_alloc(mm, pu, addr);
+			hpdp = (hugepd_t *)pm;
+		}
+	}
+
+	if (!hpdp)
+		return NULL;
+
+	BUG_ON(!hugepd_none(*hpdp) && !hugepd_ok(*hpdp));
+
+	if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, pdshift, pshift))
+		return NULL;
+
+	return hugepte_offset(hpdp, addr, pdshift);
 }
 
 /* Build list of addresses of gigantic pages.  This function is used in early
@@ -192,94 +199,38 @@ int alloc_bootmem_huge_page(struct hstate *hstate)
 	return 1;
 }
 
-
-/* Modelled after find_linux_pte() */
-pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
-{
-	pgd_t *pg;
-	pud_t *pu;
-	pmd_t *pm;
-
-	unsigned int psize;
-	unsigned int shift;
-	unsigned long sz;
-	struct hstate *hstate;
-	psize = get_slice_psize(mm, addr);
-	shift = mmu_psize_to_shift(psize);
-	sz = ((1UL) << shift);
-	hstate = size_to_hstate(sz);
-
-	addr &= hstate->mask;
-
-	pg = pgd_offset(mm, addr);
-	if (!pgd_none(*pg)) {
-		pu = hpud_offset(pg, addr, hstate);
-		if (!pud_none(*pu)) {
-			pm = hpmd_offset(pu, addr, hstate);
-			if (!pmd_none(*pm))
-				return hugepte_offset((hugepd_t *)pm, addr,
-						      hstate);
-		}
-	}
-
-	return NULL;
-}
-
-pte_t *huge_pte_alloc(struct mm_struct *mm,
-			unsigned long addr, unsigned long sz)
-{
-	pgd_t *pg;
-	pud_t *pu;
-	pmd_t *pm;
-	hugepd_t *hpdp = NULL;
-	struct hstate *hstate;
-	unsigned int psize;
-	hstate = size_to_hstate(sz);
-
-	psize = get_slice_psize(mm, addr);
-	BUG_ON(!mmu_huge_psizes[psize]);
-
-	addr &= hstate->mask;
-
-	pg = pgd_offset(mm, addr);
-	pu = hpud_alloc(mm, pg, addr, hstate);
-
-	if (pu) {
-		pm = hpmd_alloc(mm, pu, addr, hstate);
-		if (pm)
-			hpdp = (hugepd_t *)pm;
-	}
-
-	if (! hpdp)
-		return NULL;
-
-	if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, psize))
-		return NULL;
-
-	return hugepte_offset(hpdp, addr, hstate);
-}
-
 int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
 {
 	return 0;
 }
 
-static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp,
-			       unsigned int psize)
+static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshift,
+			      unsigned long start, unsigned long end,
+			      unsigned long floor, unsigned long ceiling)
 {
 	pte_t *hugepte = hugepd_page(*hpdp);
+	unsigned shift = hugepd_shift(*hpdp);
+	unsigned long pdmask = ~((1UL << pdshift) - 1);
+
+	start &= pdmask;
+	if (start < floor)
+		return;
+	if (ceiling) {
+		ceiling &= pdmask;
+		if (! ceiling)
+			return;
+	}
+	if (end - 1 > ceiling - 1)
+		return;
 
 	hpdp->pd = 0;
 	tlb->need_flush = 1;
-	pgtable_free_tlb(tlb, pgtable_free_cache(hugepte,
-						 HUGEPTE_CACHE_NUM+psize-1,
-						 PGF_CACHENUM_MASK));
+	pgtable_free_tlb(tlb, hugepte, pdshift - shift);
 }
 
 static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 				   unsigned long addr, unsigned long end,
-				   unsigned long floor, unsigned long ceiling,
-				   unsigned int psize)
+				   unsigned long floor, unsigned long ceiling)
 {
 	pmd_t *pmd;
 	unsigned long next;
@@ -291,7 +242,8 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 		next = pmd_addr_end(addr, end);
 		if (pmd_none(*pmd))
 			continue;
-		free_hugepte_range(tlb, (hugepd_t *)pmd, psize);
+		free_hugepd_range(tlb, (hugepd_t *)pmd, PMD_SHIFT,
+				  addr, next, floor, ceiling);
 	} while (pmd++, addr = next, addr != end);
 
 	start &= PUD_MASK;
@@ -317,23 +269,19 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 	pud_t *pud;
 	unsigned long next;
 	unsigned long start;
-	unsigned int shift;
-	unsigned int psize = get_slice_psize(tlb->mm, addr);
-	shift = mmu_psize_to_shift(psize);
 
 	start = addr;
 	pud = pud_offset(pgd, addr);
 	do {
 		next = pud_addr_end(addr, end);
-		if (shift < PMD_SHIFT) {
+		if (!is_hugepd(pud)) {
 			if (pud_none_or_clear_bad(pud))
 				continue;
 			hugetlb_free_pmd_range(tlb, pud, addr, next, floor,
-					       ceiling, psize);
+					       ceiling);
 		} else {
-			if (pud_none(*pud))
-				continue;
-			free_hugepte_range(tlb, (hugepd_t *)pud, psize);
+			free_hugepd_range(tlb, (hugepd_t *)pud, PUD_SHIFT,
+					  addr, next, floor, ceiling);
 		}
 	} while (pud++, addr = next, addr != end);
 
@@ -364,121 +312,56 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 {
 	pgd_t *pgd;
 	unsigned long next;
-	unsigned long start;
 
 	/*
-	 * Comments below take from the normal free_pgd_range().  They
-	 * apply here too.  The tests against HUGEPD_MASK below are
-	 * essential, because we *don't* test for this at the bottom
-	 * level.  Without them we'll attempt to free a hugepte table
-	 * when we unmap just part of it, even if there are other
-	 * active mappings using it.
-	 *
-	 * The next few lines have given us lots of grief...
-	 *
-	 * Why are we testing HUGEPD* at this top level?  Because
-	 * often there will be no work to do at all, and we'd prefer
-	 * not to go all the way down to the bottom just to discover
-	 * that.
-	 *
-	 * Why all these "- 1"s?  Because 0 represents both the bottom
-	 * of the address space and the top of it (using -1 for the
-	 * top wouldn't help much: the masks would do the wrong thing).
-	 * The rule is that addr 0 and floor 0 refer to the bottom of
-	 * the address space, but end 0 and ceiling 0 refer to the top
-	 * Comparisons need to use "end - 1" and "ceiling - 1" (though
-	 * that end 0 case should be mythical).
+	 * Because there are a number of different possible pagetable
+	 * layouts for hugepage ranges, we limit knowledge of how
+	 * things should be laid out to the allocation path
+	 * (huge_pte_alloc(), above).  Everything else works out the
+	 * structure as it goes from information in the hugepd
+	 * pointers.  That means that we can't here use the
+	 * optimization used in the normal page free_pgd_range(), of
+	 * checking whether we're actually covering a large enough
+	 * range to have to do anything at the top level of the walk
+	 * instead of at the bottom.
 	 *
-	 * Wherever addr is brought up or ceiling brought down, we
-	 * must be careful to reject "the opposite 0" before it
-	 * confuses the subsequent tests.  But what about where end is
-	 * brought down by HUGEPD_SIZE below? no, end can't go down to
-	 * 0 there.
-	 *
-	 * Whereas we round start (addr) and ceiling down, by different
-	 * masks at different levels, in order to test whether a table
-	 * now has no other vmas using it, so can be freed, we don't
-	 * bother to round floor or end up - the tests don't need that.
+	 * To make sense of this, you should probably go read the big
+	 * block comment at the top of the normal free_pgd_range(),
+	 * too.
 	 */
-	unsigned int psize = get_slice_psize(tlb->mm, addr);
-
-	addr &= HUGEPD_MASK(psize);
-	if (addr < floor) {
-		addr += HUGEPD_SIZE(psize);
-		if (!addr)
-			return;
-	}
-	if (ceiling) {
-		ceiling &= HUGEPD_MASK(psize);
-		if (!ceiling)
-			return;
-	}
-	if (end - 1 > ceiling - 1)
-		end -= HUGEPD_SIZE(psize);
-	if (addr > end - 1)
-		return;
 
-	start = addr;
 	pgd = pgd_offset(tlb->mm, addr);
 	do {
-		psize = get_slice_psize(tlb->mm, addr);
-		BUG_ON(!mmu_huge_psizes[psize]);
 		next = pgd_addr_end(addr, end);
-		if (mmu_psize_to_shift(psize) < PUD_SHIFT) {
+		if (!is_hugepd(pgd)) {
 			if (pgd_none_or_clear_bad(pgd))
 				continue;
 			hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
 		} else {
-			if (pgd_none(*pgd))
-				continue;
-			free_hugepte_range(tlb, (hugepd_t *)pgd, psize);
+			free_hugepd_range(tlb, (hugepd_t *)pgd, PGDIR_SHIFT,
+					  addr, next, floor, ceiling);
 		}
 	} while (pgd++, addr = next, addr != end);
 }
 
-void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
-		     pte_t *ptep, pte_t pte)
-{
-	if (pte_present(*ptep)) {
-		/* We open-code pte_clear because we need to pass the right
-		 * argument to hpte_need_flush (huge / !huge). Might not be
-		 * necessary anymore if we make hpte_need_flush() get the
-		 * page size from the slices
-		 */
-		unsigned int psize = get_slice_psize(mm, addr);
-		unsigned int shift = mmu_psize_to_shift(psize);
-		unsigned long sz = ((1UL) << shift);
-		struct hstate *hstate = size_to_hstate(sz);
-		pte_update(mm, addr & hstate->mask, ptep, ~0UL, 1);
-	}
-	*ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
-}
-
-pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep)
-{
-	unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1);
-	return __pte(old);
-}
-
 struct page *
 follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
 {
 	pte_t *ptep;
 	struct page *page;
-	unsigned int mmu_psize = get_slice_psize(mm, address);
+	unsigned shift;
+	unsigned long mask;
+
+	ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift);
 
 	/* Verify it is a huge page else bail. */
-	if (!mmu_huge_psizes[mmu_psize])
+	if (!ptep || !shift)
 		return ERR_PTR(-EINVAL);
 
-	ptep = huge_pte_offset(mm, address);
+	mask = (1UL << shift) - 1;
 	page = pte_page(*ptep);
-	if (page) {
-		unsigned int shift = mmu_psize_to_shift(mmu_psize);
-		unsigned long sz = ((1UL) << shift);
-		page += (address % sz) / PAGE_SIZE;
-	}
+	if (page)
+		page += (address & mask) / PAGE_SIZE;
 
 	return page;
 }
@@ -501,6 +384,82 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 	return NULL;
 }
 
+static noinline int gup_hugepte(pte_t *ptep, unsigned long sz, unsigned long addr,
+		       unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	unsigned long pte_end;
+	struct page *head, *page;
+	pte_t pte;
+	int refs;
+
+	pte_end = (addr + sz) & ~(sz-1);
+	if (pte_end < end)
+		end = pte_end;
+
+	pte = *ptep;
+	mask = _PAGE_PRESENT | _PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+
+	/* hugepages are never "special" */
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+
+	page = head + ((addr & (sz-1)) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (addr += PAGE_SIZE, addr != end);
+
+	if (!page_cache_add_speculative(head, refs)) {
+		*nr -= refs;
+		return 0;
+	}
+
+	if (unlikely(pte_val(pte) != pte_val(*ptep))) {
+		/* Could be optimized better */
+		while (*nr) {
+			put_page(page);
+			(*nr)--;
+		}
+	}
+
+	return 1;
+}
+
+static unsigned long hugepte_addr_end(unsigned long addr, unsigned long end,
+				      unsigned long sz)
+{
+	unsigned long __boundary = (addr + sz) & ~(sz-1);
+	return (__boundary - 1 < end - 1) ? __boundary : end;
+}
+
+int gup_hugepd(hugepd_t *hugepd, unsigned pdshift,
+	       unsigned long addr, unsigned long end,
+	       int write, struct page **pages, int *nr)
+{
+	pte_t *ptep;
+	unsigned long sz = 1UL << hugepd_shift(*hugepd);
+	unsigned long next;
+
+	ptep = hugepte_offset(hugepd, addr, pdshift);
+	do {
+		next = hugepte_addr_end(addr, end, sz);
+		if (!gup_hugepte(ptep, sz, addr, end, write, pages, nr))
+			return 0;
+	} while (ptep++, addr = next, addr != end);
+
+	return 1;
+}
 
 unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 					unsigned long len, unsigned long pgoff,
@@ -509,8 +468,6 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 	struct hstate *hstate = hstate_file(file);
 	int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
 
-	if (!mmu_huge_psizes[mmu_psize])
-		return -EINVAL;
 	return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
 }
 
@@ -521,229 +478,46 @@ unsigned long vma_mmu_pagesize(struct vm_area_struct *vma)
 	return 1UL << mmu_psize_to_shift(psize);
 }
 
-/*
- * Called by asm hashtable.S for doing lazy icache flush
- */
-static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags,
-					pte_t pte, int trap, unsigned long sz)
+static int __init add_huge_page_size(unsigned long long size)
 {
-	struct page *page;
-	int i;
-
-	if (!pfn_valid(pte_pfn(pte)))
-		return rflags;
-
-	page = pte_page(pte);
-
-	/* page is dirty */
-	if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
-		if (trap == 0x400) {
-			for (i = 0; i < (sz / PAGE_SIZE); i++)
-				__flush_dcache_icache(page_address(page+i));
-			set_bit(PG_arch_1, &page->flags);
-		} else {
-			rflags |= HPTE_R_N;
-		}
-	}
-	return rflags;
-}
+	int shift = __ffs(size);
+	int mmu_psize;
 
-int hash_huge_page(struct mm_struct *mm, unsigned long access,
-		   unsigned long ea, unsigned long vsid, int local,
-		   unsigned long trap)
-{
-	pte_t *ptep;
-	unsigned long old_pte, new_pte;
-	unsigned long va, rflags, pa, sz;
-	long slot;
-	int err = 1;
-	int ssize = user_segment_size(ea);
-	unsigned int mmu_psize;
-	int shift;
-	mmu_psize = get_slice_psize(mm, ea);
-
-	if (!mmu_huge_psizes[mmu_psize])
-		goto out;
-	ptep = huge_pte_offset(mm, ea);
-
-	/* Search the Linux page table for a match with va */
-	va = hpt_va(ea, vsid, ssize);
+	/* Check that it is a page size supported by the hardware and
+	 * that it fits within pagetable and slice limits. */
+	if (!is_power_of_2(size)
+	    || (shift > SLICE_HIGH_SHIFT) || (shift <= PAGE_SHIFT))
+		return -EINVAL;
 
-	/*
-	 * If no pte found or not present, send the problem up to
-	 * do_page_fault
-	 */
-	if (unlikely(!ptep || pte_none(*ptep)))
-		goto out;
+	if ((mmu_psize = shift_to_mmu_psize(shift)) < 0)
+		return -EINVAL;
 
-	/* 
-	 * Check the user's access rights to the page.  If access should be
-	 * prevented then send the problem up to do_page_fault.
+#ifdef CONFIG_SPU_FS_64K_LS
+	/* Disable support for 64K huge pages when 64K SPU local store
+	 * support is enabled as the current implementation conflicts.
 	 */
-	if (unlikely(access & ~pte_val(*ptep)))
-		goto out;
-	/*
-	 * At this point, we have a pte (old_pte) which can be used to build
-	 * or update an HPTE. There are 2 cases:
-	 *
-	 * 1. There is a valid (present) pte with no associated HPTE (this is 
-	 *	the most common case)
-	 * 2. There is a valid (present) pte with an associated HPTE. The
-	 *	current values of the pp bits in the HPTE prevent access
-	 *	because we are doing software DIRTY bit management and the
-	 *	page is currently not DIRTY. 
-	 */
-
-
-	do {
-		old_pte = pte_val(*ptep);
-		if (old_pte & _PAGE_BUSY)
-			goto out;
-		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
-	} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
-					 old_pte, new_pte));
-
-	rflags = 0x2 | (!(new_pte & _PAGE_RW));
- 	/* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
-	rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
-	shift = mmu_psize_to_shift(mmu_psize);
-	sz = ((1UL) << shift);
-	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
-		/* No CPU has hugepages but lacks no execute, so we
-		 * don't need to worry about that case */
-		rflags = hash_huge_page_do_lazy_icache(rflags, __pte(old_pte),
-						       trap, sz);
-
-	/* Check if pte already has an hpte (case 2) */
-	if (unlikely(old_pte & _PAGE_HASHPTE)) {
-		/* There MIGHT be an HPTE for this pte */
-		unsigned long hash, slot;
-
-		hash = hpt_hash(va, shift, ssize);
-		if (old_pte & _PAGE_F_SECOND)
-			hash = ~hash;
-		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		slot += (old_pte & _PAGE_F_GIX) >> 12;
-
-		if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize,
-					 ssize, local) == -1)
-			old_pte &= ~_PAGE_HPTEFLAGS;
-	}
-
-	if (likely(!(old_pte & _PAGE_HASHPTE))) {
-		unsigned long hash = hpt_hash(va, shift, ssize);
-		unsigned long hpte_group;
-
-		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
-
-repeat:
-		hpte_group = ((hash & htab_hash_mask) *
-			      HPTES_PER_GROUP) & ~0x7UL;
-
-		/* clear HPTE slot informations in new PTE */
-#ifdef CONFIG_PPC_64K_PAGES
-		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0;
-#else
-		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
-#endif
-		/* Add in WIMG bits */
-		rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
-				      _PAGE_COHERENT | _PAGE_GUARDED));
-
-		/* Insert into the hash table, primary slot */
-		slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
-					  mmu_psize, ssize);
-
-		/* Primary is full, try the secondary */
-		if (unlikely(slot == -1)) {
-			hpte_group = ((~hash & htab_hash_mask) *
-				      HPTES_PER_GROUP) & ~0x7UL; 
-			slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
-						  HPTE_V_SECONDARY,
-						  mmu_psize, ssize);
-			if (slot == -1) {
-				if (mftb() & 0x1)
-					hpte_group = ((hash & htab_hash_mask) *
-						      HPTES_PER_GROUP)&~0x7UL;
-
-				ppc_md.hpte_remove(hpte_group);
-				goto repeat;
-                        }
-		}
-
-		if (unlikely(slot == -2))
-			panic("hash_huge_page: pte_insert failed\n");
-
-		new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
-	}
+	if (shift == PAGE_SHIFT_64K)
+		return -EINVAL;
+#endif /* CONFIG_SPU_FS_64K_LS */
 
-	/*
-	 * No need to use ldarx/stdcx here
-	 */
-	*ptep = __pte(new_pte & ~_PAGE_BUSY);
+	BUG_ON(mmu_psize_defs[mmu_psize].shift != shift);
 
-	err = 0;
+	/* Return if huge page size has already been setup */
+	if (size_to_hstate(size))
+		return 0;
 
- out:
-	return err;
-}
+	hugetlb_add_hstate(shift - PAGE_SHIFT);
 
-static void __init set_huge_psize(int psize)
-{
-	/* Check that it is a page size supported by the hardware and
-	 * that it fits within pagetable limits. */
-	if (mmu_psize_defs[psize].shift &&
-		mmu_psize_defs[psize].shift < SID_SHIFT_1T &&
-		(mmu_psize_defs[psize].shift > MIN_HUGEPTE_SHIFT ||
-		 mmu_psize_defs[psize].shift == PAGE_SHIFT_64K ||
-		 mmu_psize_defs[psize].shift == PAGE_SHIFT_16G)) {
-		/* Return if huge page size has already been setup or is the
-		 * same as the base page size. */
-		if (mmu_huge_psizes[psize] ||
-		   mmu_psize_defs[psize].shift == PAGE_SHIFT)
-			return;
-		if (WARN_ON(HUGEPTE_CACHE_NAME(psize) == NULL))
-			return;
-		hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT);
-
-		switch (mmu_psize_defs[psize].shift) {
-		case PAGE_SHIFT_64K:
-		    /* We only allow 64k hpages with 4k base page,
-		     * which was checked above, and always put them
-		     * at the PMD */
-		    hugepte_shift[psize] = PMD_SHIFT;
-		    break;
-		case PAGE_SHIFT_16M:
-		    /* 16M pages can be at two different levels
-		     * of pagestables based on base page size */
-		    if (PAGE_SHIFT == PAGE_SHIFT_64K)
-			    hugepte_shift[psize] = PMD_SHIFT;
-		    else /* 4k base page */
-			    hugepte_shift[psize] = PUD_SHIFT;
-		    break;
-		case PAGE_SHIFT_16G:
-		    /* 16G pages are always at PGD level */
-		    hugepte_shift[psize] = PGDIR_SHIFT;
-		    break;
-		}
-		hugepte_shift[psize] -= mmu_psize_defs[psize].shift;
-	} else
-		hugepte_shift[psize] = 0;
+	return 0;
 }
 
 static int __init hugepage_setup_sz(char *str)
 {
 	unsigned long long size;
-	int mmu_psize;
-	int shift;
 
 	size = memparse(str, &str);
 
-	shift = __ffs(size);
-	mmu_psize = shift_to_mmu_psize(shift);
-	if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift)
-		set_huge_psize(mmu_psize);
-	else
+	if (add_huge_page_size(size) != 0)
 		printk(KERN_WARNING "Invalid huge page size specified(%llu)\n", size);
 
 	return 1;
@@ -752,41 +526,55 @@ __setup("hugepagesz=", hugepage_setup_sz);
 
 static int __init hugetlbpage_init(void)
 {
-	unsigned int psize;
+	int psize;
 
 	if (!cpu_has_feature(CPU_FTR_16M_PAGE))
 		return -ENODEV;
 
-	/* Add supported huge page sizes.  Need to change HUGE_MAX_HSTATE
-	 * and adjust PTE_NONCACHE_NUM if the number of supported huge page
-	 * sizes changes.
-	 */
-	set_huge_psize(MMU_PAGE_16M);
-	set_huge_psize(MMU_PAGE_16G);
+	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+		unsigned shift;
+		unsigned pdshift;
 
-	/* Temporarily disable support for 64K huge pages when 64K SPU local
-	 * store support is enabled as the current implementation conflicts.
-	 */
-#ifndef CONFIG_SPU_FS_64K_LS
-	set_huge_psize(MMU_PAGE_64K);
-#endif
+		if (!mmu_psize_defs[psize].shift)
+			continue;
 
-	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
-		if (mmu_huge_psizes[psize]) {
-			pgtable_cache[HUGE_PGTABLE_INDEX(psize)] =
-				kmem_cache_create(
-					HUGEPTE_CACHE_NAME(psize),
-					HUGEPTE_TABLE_SIZE(psize),
-					HUGEPTE_TABLE_SIZE(psize),
-					0,
-					NULL);
-			if (!pgtable_cache[HUGE_PGTABLE_INDEX(psize)])
-				panic("hugetlbpage_init(): could not create %s"\
-				      "\n", HUGEPTE_CACHE_NAME(psize));
-		}
+		shift = mmu_psize_to_shift(psize);
+
+		if (add_huge_page_size(1ULL << shift) < 0)
+			continue;
+
+		if (shift < PMD_SHIFT)
+			pdshift = PMD_SHIFT;
+		else if (shift < PUD_SHIFT)
+			pdshift = PUD_SHIFT;
+		else
+			pdshift = PGDIR_SHIFT;
+
+		pgtable_cache_add(pdshift - shift, NULL);
+		if (!PGT_CACHE(pdshift - shift))
+			panic("hugetlbpage_init(): could not create "
+			      "pgtable cache for %d bit pagesize\n", shift);
 	}
 
+	/* Set default large page size. Currently, we pick 16M or 1M
+	 * depending on what is available
+	 */
+	if (mmu_psize_defs[MMU_PAGE_16M].shift)
+		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift;
+	else if (mmu_psize_defs[MMU_PAGE_1M].shift)
+		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift;
+
 	return 0;
 }
 
 module_init(hugetlbpage_init);
+
+void flush_dcache_icache_hugepage(struct page *page)
+{
+	int i;
+
+	BUG_ON(!PageCompound(page));
+
+	for (i = 0; i < (1UL << compound_order(page)); i++)
+		__flush_dcache_icache(page_address(page+i));
+}
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 335c578b9cc3..776f28d02b6b 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -41,6 +41,7 @@
 #include <linux/module.h>
 #include <linux/poison.h>
 #include <linux/lmb.h>
+#include <linux/hugetlb.h>
 
 #include <asm/pgalloc.h>
 #include <asm/page.h>
@@ -119,30 +120,63 @@ static void pmd_ctor(void *addr)
 	memset(addr, 0, PMD_TABLE_SIZE);
 }
 
-static const unsigned int pgtable_cache_size[2] = {
-	PGD_TABLE_SIZE, PMD_TABLE_SIZE
-};
-static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
-#ifdef CONFIG_PPC_64K_PAGES
-	"pgd_cache", "pmd_cache",
-#else
-	"pgd_cache", "pud_pmd_cache",
-#endif /* CONFIG_PPC_64K_PAGES */
-};
-
-#ifdef CONFIG_HUGETLB_PAGE
-/* Hugepages need an extra cache per hugepagesize, initialized in
- * hugetlbpage.c.  We can't put into the tables above, because HPAGE_SHIFT
- * is not compile time constant. */
-struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+MMU_PAGE_COUNT];
-#else
-struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
-#endif
+struct kmem_cache *pgtable_cache[MAX_PGTABLE_INDEX_SIZE];
+
+/*
+ * Create a kmem_cache() for pagetables.  This is not used for PTE
+ * pages - they're linked to struct page, come from the normal free
+ * pages pool and have a different entry size (see real_pte_t) to
+ * everything else.  Caches created by this function are used for all
+ * the higher level pagetables, and for hugepage pagetables.
+ */
+void pgtable_cache_add(unsigned shift, void (*ctor)(void *))
+{
+	char *name;
+	unsigned long table_size = sizeof(void *) << shift;
+	unsigned long align = table_size;
+
+	/* When batching pgtable pointers for RCU freeing, we store
+	 * the index size in the low bits.  Table alignment must be
+	 * big enough to fit it.
+	 *
+	 * Likewise, hugeapge pagetable pointers contain a (different)
+	 * shift value in the low bits.  All tables must be aligned so
+	 * as to leave enough 0 bits in the address to contain it. */
+	unsigned long minalign = max(MAX_PGTABLE_INDEX_SIZE + 1,
+				     HUGEPD_SHIFT_MASK + 1);
+	struct kmem_cache *new;
+
+	/* It would be nice if this was a BUILD_BUG_ON(), but at the
+	 * moment, gcc doesn't seem to recognize is_power_of_2 as a
+	 * constant expression, so so much for that. */
+	BUG_ON(!is_power_of_2(minalign));
+	BUG_ON((shift < 1) || (shift > MAX_PGTABLE_INDEX_SIZE));
+
+	if (PGT_CACHE(shift))
+		return; /* Already have a cache of this size */
+
+	align = max_t(unsigned long, align, minalign);
+	name = kasprintf(GFP_KERNEL, "pgtable-2^%d", shift);
+	new = kmem_cache_create(name, table_size, align, 0, ctor);
+	PGT_CACHE(shift) = new;
+
+	pr_debug("Allocated pgtable cache for order %d\n", shift);
+}
+
 
 void pgtable_cache_init(void)
 {
-	pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor);
-	pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor);
+	pgtable_cache_add(PGD_INDEX_SIZE, pgd_ctor);
+	pgtable_cache_add(PMD_INDEX_SIZE, pmd_ctor);
+	if (!PGT_CACHE(PGD_INDEX_SIZE) || !PGT_CACHE(PMD_INDEX_SIZE))
+		panic("Couldn't allocate pgtable caches");
+
+	/* In all current configs, when the PUD index exists it's the
+	 * same size as either the pgd or pmd index.  Verify that the
+	 * initialization above has also created a PUD cache.  This
+	 * will need re-examiniation if we add new possibilities for
+	 * the pagetable layout. */
+	BUG_ON(PUD_INDEX_SIZE && !PGT_CACHE(PUD_INDEX_SIZE));
 }
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 59736317bf0e..b9b152558f9c 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -32,6 +32,7 @@
 #include <linux/pagemap.h>
 #include <linux/suspend.h>
 #include <linux/lmb.h>
+#include <linux/hugetlb.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -417,18 +418,26 @@ EXPORT_SYMBOL(flush_dcache_page);
 
 void flush_dcache_icache_page(struct page *page)
 {
+#ifdef CONFIG_HUGETLB_PAGE
+	if (PageCompound(page)) {
+		flush_dcache_icache_hugepage(page);
+		return;
+	}
+#endif
 #ifdef CONFIG_BOOKE
-	void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE);
-	__flush_dcache_icache(start);
-	kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
+	{
+		void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE);
+		__flush_dcache_icache(start);
+		kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
+	}
 #elif defined(CONFIG_8xx) || defined(CONFIG_PPC64)
 	/* On 8xx there is no need to kmap since highmem is not supported */
 	__flush_dcache_icache(page_address(page)); 
 #else
 	__flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
 #endif
-
 }
+
 void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
 {
 	clear_page(page);
diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c
index dbeb86ac90cd..b910d37aea1a 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -18,6 +18,7 @@
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/idr.h>
+#include <linux/module.h>
 
 #include <asm/mmu_context.h>
 
@@ -32,7 +33,7 @@ static DEFINE_IDR(mmu_context_idr);
 #define NO_CONTEXT	0
 #define MAX_CONTEXT	((1UL << 19) - 1)
 
-int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+int __init_new_context(void)
 {
 	int index;
 	int err;
@@ -57,22 +58,41 @@ again:
 		return -ENOMEM;
 	}
 
+	return index;
+}
+EXPORT_SYMBOL_GPL(__init_new_context);
+
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	int index;
+
+	index = __init_new_context();
+	if (index < 0)
+		return index;
+
 	/* The old code would re-promote on fork, we don't do that
 	 * when using slices as it could cause problem promoting slices
 	 * that have been forced down to 4K
 	 */
 	if (slice_mm_new_context(mm))
 		slice_set_user_psize(mm, mmu_virtual_psize);
+	subpage_prot_init_new_context(mm);
 	mm->context.id = index;
 
 	return 0;
 }
 
-void destroy_context(struct mm_struct *mm)
+void __destroy_context(int context_id)
 {
 	spin_lock(&mmu_context_lock);
-	idr_remove(&mmu_context_idr, mm->context.id);
+	idr_remove(&mmu_context_idr, context_id);
 	spin_unlock(&mmu_context_lock);
+}
+EXPORT_SYMBOL_GPL(__destroy_context);
 
+void destroy_context(struct mm_struct *mm)
+{
+	__destroy_context(mm->context.id);
+	subpage_prot_free(mm);
 	mm->context.id = NO_CONTEXT;
 }
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index d2e5321d5ea6..e27a990af42d 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -98,21 +98,10 @@ extern void _tlbia(void);
 
 #ifdef CONFIG_PPC32
 
-struct tlbcam {
-	u32	MAS0;
-	u32	MAS1;
-	u32	MAS2;
-	u32	MAS3;
-	u32	MAS7;
-};
-
 extern void mapin_ram(void);
 extern int map_page(unsigned long va, phys_addr_t pa, int flags);
 extern void setbat(int index, unsigned long virt, phys_addr_t phys,
 		   unsigned int size, int flags);
-extern void settlbcam(int index, unsigned long virt, phys_addr_t phys,
-		      unsigned int size, int flags, unsigned int pid);
-extern void invalidate_tlbcam_entry(int index);
 
 extern int __map_without_bats;
 extern unsigned long ioremap_base;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 53040931de32..99df697c601a 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -49,12 +49,12 @@ struct pte_freelist_batch
 {
 	struct rcu_head	rcu;
 	unsigned int	index;
-	pgtable_free_t	tables[0];
+	unsigned long	tables[0];
 };
 
 #define PTE_FREELIST_SIZE \
 	((PAGE_SIZE - sizeof(struct pte_freelist_batch)) \
-	  / sizeof(pgtable_free_t))
+	  / sizeof(unsigned long))
 
 static void pte_free_smp_sync(void *arg)
 {
@@ -64,13 +64,13 @@ static void pte_free_smp_sync(void *arg)
 /* This is only called when we are critically out of memory
  * (and fail to get a page in pte_free_tlb).
  */
-static void pgtable_free_now(pgtable_free_t pgf)
+static void pgtable_free_now(void *table, unsigned shift)
 {
 	pte_freelist_forced_free++;
 
 	smp_call_function(pte_free_smp_sync, NULL, 1);
 
-	pgtable_free(pgf);
+	pgtable_free(table, shift);
 }
 
 static void pte_free_rcu_callback(struct rcu_head *head)
@@ -79,8 +79,12 @@ static void pte_free_rcu_callback(struct rcu_head *head)
 		container_of(head, struct pte_freelist_batch, rcu);
 	unsigned int i;
 
-	for (i = 0; i < batch->index; i++)
-		pgtable_free(batch->tables[i]);
+	for (i = 0; i < batch->index; i++) {
+		void *table = (void *)(batch->tables[i] & ~MAX_PGTABLE_INDEX_SIZE);
+		unsigned shift = batch->tables[i] & MAX_PGTABLE_INDEX_SIZE;
+
+		pgtable_free(table, shift);
+	}
 
 	free_page((unsigned long)batch);
 }
@@ -91,25 +95,28 @@ static void pte_free_submit(struct pte_freelist_batch *batch)
 	call_rcu(&batch->rcu, pte_free_rcu_callback);
 }
 
-void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
+void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift)
 {
 	/* This is safe since tlb_gather_mmu has disabled preemption */
 	struct pte_freelist_batch **batchp = &__get_cpu_var(pte_freelist_cur);
+	unsigned long pgf;
 
 	if (atomic_read(&tlb->mm->mm_users) < 2 ||
 	    cpumask_equal(mm_cpumask(tlb->mm), cpumask_of(smp_processor_id()))){
-		pgtable_free(pgf);
+		pgtable_free(table, shift);
 		return;
 	}
 
 	if (*batchp == NULL) {
 		*batchp = (struct pte_freelist_batch *)__get_free_page(GFP_ATOMIC);
 		if (*batchp == NULL) {
-			pgtable_free_now(pgf);
+			pgtable_free_now(table, shift);
 			return;
 		}
 		(*batchp)->index = 0;
 	}
+	BUG_ON(shift > MAX_PGTABLE_INDEX_SIZE);
+	pgf = (unsigned long)table | shift;
 	(*batchp)->tables[(*batchp)->index++] = pgf;
 	if ((*batchp)->index == PTE_FREELIST_SIZE) {
 		pte_free_submit(*batchp);
diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c
index 4cafc0c33d0a..a040b81e93bd 100644
--- a/arch/powerpc/mm/subpage-prot.c
+++ b/arch/powerpc/mm/subpage-prot.c
@@ -24,9 +24,9 @@
  * Also makes sure that the subpage_prot_table structure is
  * reinitialized for the next user.
  */
-void subpage_prot_free(pgd_t *pgd)
+void subpage_prot_free(struct mm_struct *mm)
 {
-	struct subpage_prot_table *spt = pgd_subpage_prot(pgd);
+	struct subpage_prot_table *spt = &mm->context.spt;
 	unsigned long i, j, addr;
 	u32 **p;
 
@@ -51,6 +51,13 @@ void subpage_prot_free(pgd_t *pgd)
 	spt->maxaddr = 0;
 }
 
+void subpage_prot_init_new_context(struct mm_struct *mm)
+{
+	struct subpage_prot_table *spt = &mm->context.spt;
+
+	memset(spt, 0, sizeof(*spt));
+}
+
 static void hpte_flush_range(struct mm_struct *mm, unsigned long addr,
 			     int npages)
 {
@@ -87,7 +94,7 @@ static void hpte_flush_range(struct mm_struct *mm, unsigned long addr,
 static void subpage_prot_clear(unsigned long addr, unsigned long len)
 {
 	struct mm_struct *mm = current->mm;
-	struct subpage_prot_table *spt = pgd_subpage_prot(mm->pgd);
+	struct subpage_prot_table *spt = &mm->context.spt;
 	u32 **spm, *spp;
 	int i, nw;
 	unsigned long next, limit;
@@ -136,7 +143,7 @@ static void subpage_prot_clear(unsigned long addr, unsigned long len)
 long sys_subpage_prot(unsigned long addr, unsigned long len, u32 __user *map)
 {
 	struct mm_struct *mm = current->mm;
-	struct subpage_prot_table *spt = pgd_subpage_prot(mm->pgd);
+	struct subpage_prot_table *spt = &mm->context.spt;
 	u32 **spm, *spp;
 	int i, nw;
 	unsigned long next, limit;
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 2b2f35f6985e..282d9306361f 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -53,11 +53,6 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 
 	i = batch->index;
 
-	/* We mask the address for the base page size. Huge pages will
-	 * have applied their own masking already
-	 */
-	addr &= PAGE_MASK;
-
 	/* Get page size (maybe move back to caller).
 	 *
 	 * NOTE: when using special 64K mappings in 4K environment like
@@ -75,6 +70,9 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 	} else
 		psize = pte_pagesize_index(mm, addr, pte);
 
+	/* Mask the address for the correct page size */
+	addr &= ~((1UL << mmu_psize_defs[psize].shift) - 1);
+
 	/* Build full vaddr */
 	if (!is_kernel_addr(addr)) {
 		ssize = user_segment_size(addr);
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index ae06c6236d9c..2c9e52267292 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -248,7 +248,7 @@ static int pm_rtas_activate_signals(u32 node, u32 count)
 	 * There is no debug setup required for the cycles event.
 	 * Note that only events in the same group can be used.
 	 * Otherwise, there will be conflicts in correctly routing
-	 * the signals on the debug bus.  It is the responsiblity
+	 * the signals on the debug bus.  It is the responsibility
 	 * of the OProfile user tool to check the events are in
 	 * the same group.
 	 */
@@ -1594,7 +1594,7 @@ static void cell_handle_interrupt_spu(struct pt_regs *regs,
 		 * to a latch.  The new values (interrupt setting bits, reset
 		 * counter value etc.) are not copied to the actual registers
 		 * until the performance monitor is enabled.  In order to get
-		 * this to work as desired, the permormance monitor needs to
+		 * this to work as desired, the performance monitor needs to
 		 * be disabled while writing to the latches.  This is a
 		 * HW design issue.
 		 */
@@ -1668,7 +1668,7 @@ static void cell_handle_interrupt_ppu(struct pt_regs *regs,
 		 * to a latch.	The new values (interrupt setting bits, reset
 		 * counter value etc.) are not copied to the actual registers
 		 * until the performance monitor is enabled.  In order to get
-		 * this to work as desired, the permormance monitor needs to
+		 * this to work as desired, the performance monitor needs to
 		 * be disabled while writing to the latches.  This is a
 		 * HW design issue.
 		 */
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
index a6ce80566625..da9b20a63769 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -79,7 +79,7 @@ cpld_unmask_irq(unsigned int irq)
 }
 
 static struct irq_chip cpld_pic = {
-	.typename = " CPLD PIC ",
+	.name = " CPLD PIC ",
 	.mask = cpld_mask_irq,
 	.ack = cpld_mask_irq,
 	.unmask = cpld_unmask_irq,
@@ -132,7 +132,7 @@ static int
 cpld_pic_host_map(struct irq_host *h, unsigned int virq,
 			     irq_hw_number_t hw)
 {
-	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	irq_to_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_and_handler(virq, &cpld_pic, handle_level_irq);
 	return 0;
 }
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 8b8e9560a315..47ea1be1481b 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -62,3 +62,8 @@ config PPC_MPC5200_GPIO
 	select GENERIC_GPIO
 	help
 	  Enable gpiolib support for mpc5200 based boards
+
+config PPC_MPC5200_LPBFIFO
+	tristate "MPC5200 LocalPlus bus FIFO driver"
+	depends on PPC_MPC52xx
+	select PPC_BESTCOMM_GEN_BD
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index bfd4f52cf3dd..2bc8cd0c5cfc 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -15,3 +15,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y)
 endif
 
 obj-$(CONFIG_PPC_MPC5200_GPIO)	+= mpc52xx_gpio.o
+obj-$(CONFIG_PPC_MPC5200_LPBFIFO)	+= mpc52xx_lpbfifo.o
diff --git a/arch/powerpc/platforms/52xx/media5200.c b/arch/powerpc/platforms/52xx/media5200.c
index 68e4f1696d14..cc0c854291d7 100644
--- a/arch/powerpc/platforms/52xx/media5200.c
+++ b/arch/powerpc/platforms/52xx/media5200.c
@@ -74,7 +74,7 @@ static void media5200_irq_mask(unsigned int virq)
 }
 
 static struct irq_chip media5200_irq_chip = {
-	.typename = "Media5200 FPGA",
+	.name = "Media5200 FPGA",
 	.unmask = media5200_irq_unmask,
 	.mask = media5200_irq_mask,
 	.mask_ack = media5200_irq_mask,
@@ -114,7 +114,7 @@ void media5200_irq_cascade(unsigned int virq, struct irq_desc *desc)
 static int media5200_irq_map(struct irq_host *h, unsigned int virq,
 			     irq_hw_number_t hw)
 {
-	struct irq_desc *desc = get_irq_desc(virq);
+	struct irq_desc *desc = irq_to_desc(virq);
 
 	pr_debug("%s: h=%p, virq=%i, hwirq=%i\n", __func__, h, virq, (int)hw);
 	set_irq_chip_data(virq, &media5200_irq);
@@ -127,7 +127,7 @@ static int media5200_irq_map(struct irq_host *h, unsigned int virq,
 }
 
 static int media5200_irq_xlate(struct irq_host *h, struct device_node *ct,
-				 u32 *intspec, unsigned int intsize,
+				 const u32 *intspec, unsigned int intsize,
 				 irq_hw_number_t *out_hwirq,
 				 unsigned int *out_flags)
 {
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index bfbcd418e690..6f8ebe1085b3 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -16,8 +16,14 @@
  * output signals or measure input signals.
  *
  * This driver supports the GPIO and IRQ controller functions of the GPT
- * device.  Timer functions are not yet supported, nor is the watchdog
- * timer.
+ * device.  Timer functions are not yet supported.
+ *
+ * The timer gpt0 can be used as watchdog (wdt).  If the wdt mode is used,
+ * this prevents the use of any gpt0 gpt function (i.e. they will fail with
+ * -EBUSY).  Thus, the safety wdt function always has precedence over the gpt
+ * function.  If the kernel has been compiled with CONFIG_WATCHDOG_NOWAYOUT,
+ * this means that gpt0 is locked in wdt mode until the next reboot - this
+ * may be a requirement in safety applications.
  *
  * To use the GPIO function, the following two properties must be added
  * to the device tree node for the gpt device (typically in the .dts file
@@ -46,17 +52,24 @@
  * the output mode.  This driver does not change the output mode setting.
  */
 
+#include <linux/device.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 #include <linux/kernel.h>
+#include <linux/watchdog.h>
+#include <linux/miscdevice.h>
+#include <linux/uaccess.h>
+#include <asm/div64.h>
 #include <asm/mpc52xx.h>
 
 MODULE_DESCRIPTION("Freescale MPC52xx gpt driver");
-MODULE_AUTHOR("Sascha Hauer, Grant Likely");
+MODULE_AUTHOR("Sascha Hauer, Grant Likely, Albrecht Dreß");
 MODULE_LICENSE("GPL");
 
 /**
@@ -66,18 +79,27 @@ MODULE_LICENSE("GPL");
  * @lock: spinlock to coordinate between different functions.
  * @of_gc: of_gpio_chip instance structure; used when GPIO is enabled
  * @irqhost: Pointer to irq_host instance; used when IRQ mode is supported
+ * @wdt_mode: only relevant for gpt0: bit 0 (MPC52xx_GPT_CAN_WDT) indicates
+ *   if the gpt may be used as wdt, bit 1 (MPC52xx_GPT_IS_WDT) indicates
+ *   if the timer is actively used as wdt which blocks gpt functions
  */
 struct mpc52xx_gpt_priv {
+	struct list_head list;		/* List of all GPT devices */
 	struct device *dev;
 	struct mpc52xx_gpt __iomem *regs;
 	spinlock_t lock;
 	struct irq_host *irqhost;
+	u32 ipb_freq;
+	u8 wdt_mode;
 
 #if defined(CONFIG_GPIOLIB)
 	struct of_gpio_chip of_gc;
 #endif
 };
 
+LIST_HEAD(mpc52xx_gpt_list);
+DEFINE_MUTEX(mpc52xx_gpt_list_mutex);
+
 #define MPC52xx_GPT_MODE_MS_MASK	(0x07)
 #define MPC52xx_GPT_MODE_MS_IC		(0x01)
 #define MPC52xx_GPT_MODE_MS_OC		(0x02)
@@ -88,15 +110,25 @@ struct mpc52xx_gpt_priv {
 #define MPC52xx_GPT_MODE_GPIO_OUT_LOW	(0x20)
 #define MPC52xx_GPT_MODE_GPIO_OUT_HIGH	(0x30)
 
+#define MPC52xx_GPT_MODE_COUNTER_ENABLE	(0x1000)
+#define MPC52xx_GPT_MODE_CONTINUOUS	(0x0400)
+#define MPC52xx_GPT_MODE_OPEN_DRAIN	(0x0200)
 #define MPC52xx_GPT_MODE_IRQ_EN		(0x0100)
+#define MPC52xx_GPT_MODE_WDT_EN		(0x8000)
 
 #define MPC52xx_GPT_MODE_ICT_MASK	(0x030000)
 #define MPC52xx_GPT_MODE_ICT_RISING	(0x010000)
 #define MPC52xx_GPT_MODE_ICT_FALLING	(0x020000)
 #define MPC52xx_GPT_MODE_ICT_TOGGLE	(0x030000)
 
+#define MPC52xx_GPT_MODE_WDT_PING	(0xa5)
+
 #define MPC52xx_GPT_STATUS_IRQMASK	(0x000f)
 
+#define MPC52xx_GPT_CAN_WDT		(1 << 0)
+#define MPC52xx_GPT_IS_WDT		(1 << 1)
+
+
 /* ---------------------------------------------------------------------
  * Cascaded interrupt controller hooks
  */
@@ -149,7 +181,7 @@ static int mpc52xx_gpt_irq_set_type(unsigned int virq, unsigned int flow_type)
 }
 
 static struct irq_chip mpc52xx_gpt_irq_chip = {
-	.typename = "MPC52xx GPT",
+	.name = "MPC52xx GPT",
 	.unmask = mpc52xx_gpt_irq_unmask,
 	.mask = mpc52xx_gpt_irq_mask,
 	.ack = mpc52xx_gpt_irq_ack,
@@ -182,7 +214,7 @@ static int mpc52xx_gpt_irq_map(struct irq_host *h, unsigned int virq,
 }
 
 static int mpc52xx_gpt_irq_xlate(struct irq_host *h, struct device_node *ct,
-				 u32 *intspec, unsigned int intsize,
+				 const u32 *intspec, unsigned int intsize,
 				 irq_hw_number_t *out_hwirq,
 				 unsigned int *out_flags)
 {
@@ -190,7 +222,7 @@ static int mpc52xx_gpt_irq_xlate(struct irq_host *h, struct device_node *ct,
 
 	dev_dbg(gpt->dev, "%s: flags=%i\n", __func__, intspec[0]);
 
-	if ((intsize < 1) || (intspec[0] < 1) || (intspec[0] > 3)) {
+	if ((intsize < 1) || (intspec[0] > 3)) {
 		dev_err(gpt->dev, "bad irq specifier in %s\n", ct->full_name);
 		return -EINVAL;
 	}
@@ -211,13 +243,11 @@ mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
 {
 	int cascade_virq;
 	unsigned long flags;
-
-	/* Only setup cascaded IRQ if device tree claims the GPT is
-	 * an interrupt controller */
-	if (!of_find_property(node, "interrupt-controller", NULL))
-		return;
+	u32 mode;
 
 	cascade_virq = irq_of_parse_and_map(node, 0);
+	if (!cascade_virq)
+		return;
 
 	gpt->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, 1,
 				      &mpc52xx_gpt_irq_ops, -1);
@@ -227,14 +257,16 @@ mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
 	}
 
 	gpt->irqhost->host_data = gpt;
-
 	set_irq_data(cascade_virq, gpt);
 	set_irq_chained_handler(cascade_virq, mpc52xx_gpt_irq_cascade);
 
-	/* Set to Input Capture mode */
+	/* If the GPT is currently disabled, then change it to be in Input
+	 * Capture mode.  If the mode is non-zero, then the pin could be
+	 * already in use for something. */
 	spin_lock_irqsave(&gpt->lock, flags);
-	clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK,
-			MPC52xx_GPT_MODE_MS_IC);
+	mode = in_be32(&gpt->regs->mode);
+	if ((mode & MPC52xx_GPT_MODE_MS_MASK) == 0)
+		out_be32(&gpt->regs->mode, mode | MPC52xx_GPT_MODE_MS_IC);
 	spin_unlock_irqrestore(&gpt->lock, flags);
 
 	dev_dbg(gpt->dev, "%s() complete. virq=%i\n", __func__, cascade_virq);
@@ -335,6 +367,354 @@ static void
 mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *p, struct device_node *np) { }
 #endif /* defined(CONFIG_GPIOLIB) */
 
+/***********************************************************************
+ * Timer API
+ */
+
+/**
+ * mpc52xx_gpt_from_irq - Return the GPT device associated with an IRQ number
+ * @irq: irq of timer.
+ */
+struct mpc52xx_gpt_priv *mpc52xx_gpt_from_irq(int irq)
+{
+	struct mpc52xx_gpt_priv *gpt;
+	struct list_head *pos;
+
+	/* Iterate over the list of timers looking for a matching device */
+	mutex_lock(&mpc52xx_gpt_list_mutex);
+	list_for_each(pos, &mpc52xx_gpt_list) {
+		gpt = container_of(pos, struct mpc52xx_gpt_priv, list);
+		if (gpt->irqhost && irq == irq_linear_revmap(gpt->irqhost, 0)) {
+			mutex_unlock(&mpc52xx_gpt_list_mutex);
+			return gpt;
+		}
+	}
+	mutex_unlock(&mpc52xx_gpt_list_mutex);
+
+	return NULL;
+}
+EXPORT_SYMBOL(mpc52xx_gpt_from_irq);
+
+static int mpc52xx_gpt_do_start(struct mpc52xx_gpt_priv *gpt, u64 period,
+				int continuous, int as_wdt)
+{
+	u32 clear, set;
+	u64 clocks;
+	u32 prescale;
+	unsigned long flags;
+
+	clear = MPC52xx_GPT_MODE_MS_MASK | MPC52xx_GPT_MODE_CONTINUOUS;
+	set = MPC52xx_GPT_MODE_MS_GPIO | MPC52xx_GPT_MODE_COUNTER_ENABLE;
+	if (as_wdt) {
+		clear |= MPC52xx_GPT_MODE_IRQ_EN;
+		set |= MPC52xx_GPT_MODE_WDT_EN;
+	} else if (continuous)
+		set |= MPC52xx_GPT_MODE_CONTINUOUS;
+
+	/* Determine the number of clocks in the requested period.  64 bit
+	 * arithmatic is done here to preserve the precision until the value
+	 * is scaled back down into the u32 range.  Period is in 'ns', bus
+	 * frequency is in Hz. */
+	clocks = period * (u64)gpt->ipb_freq;
+	do_div(clocks, 1000000000); /* Scale it down to ns range */
+
+	/* This device cannot handle a clock count greater than 32 bits */
+	if (clocks > 0xffffffff)
+		return -EINVAL;
+
+	/* Calculate the prescaler and count values from the clocks value.
+	 * 'clocks' is the number of clock ticks in the period.  The timer
+	 * has 16 bit precision and a 16 bit prescaler.  Prescaler is
+	 * calculated by integer dividing the clocks by 0x10000 (shifting
+	 * down 16 bits) to obtain the smallest possible divisor for clocks
+	 * to get a 16 bit count value.
+	 *
+	 * Note: the prescale register is '1' based, not '0' based.  ie. a
+	 * value of '1' means divide the clock by one.  0xffff divides the
+	 * clock by 0xffff.  '0x0000' does not divide by zero, but wraps
+	 * around and divides by 0x10000.  That is why prescale must be
+	 * a u32 variable, not a u16, for this calculation. */
+	prescale = (clocks >> 16) + 1;
+	do_div(clocks, prescale);
+	if (clocks > 0xffff) {
+		pr_err("calculation error; prescale:%x clocks:%llx\n",
+		       prescale, clocks);
+		return -EINVAL;
+	}
+
+	/* Set and enable the timer, reject an attempt to use a wdt as gpt */
+	spin_lock_irqsave(&gpt->lock, flags);
+	if (as_wdt)
+		gpt->wdt_mode |= MPC52xx_GPT_IS_WDT;
+	else if ((gpt->wdt_mode & MPC52xx_GPT_IS_WDT) != 0) {
+		spin_unlock_irqrestore(&gpt->lock, flags);
+		return -EBUSY;
+	}
+	out_be32(&gpt->regs->count, prescale << 16 | clocks);
+	clrsetbits_be32(&gpt->regs->mode, clear, set);
+	spin_unlock_irqrestore(&gpt->lock, flags);
+
+	return 0;
+}
+
+/**
+ * mpc52xx_gpt_start_timer - Set and enable the GPT timer
+ * @gpt: Pointer to gpt private data structure
+ * @period: period of timer in ns; max. ~130s @ 33MHz IPB clock
+ * @continuous: set to 1 to make timer continuous free running
+ *
+ * An interrupt will be generated every time the timer fires
+ */
+int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, u64 period,
+                            int continuous)
+{
+	return mpc52xx_gpt_do_start(gpt, period, continuous, 0);
+}
+EXPORT_SYMBOL(mpc52xx_gpt_start_timer);
+
+/**
+ * mpc52xx_gpt_stop_timer - Stop a gpt
+ * @gpt: Pointer to gpt private data structure
+ *
+ * Returns an error if attempting to stop a wdt
+ */
+int mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt)
+{
+	unsigned long flags;
+
+	/* reject the operation if the timer is used as watchdog (gpt 0 only) */
+	spin_lock_irqsave(&gpt->lock, flags);
+	if ((gpt->wdt_mode & MPC52xx_GPT_IS_WDT) != 0) {
+		spin_unlock_irqrestore(&gpt->lock, flags);
+		return -EBUSY;
+	}
+
+	clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_COUNTER_ENABLE);
+	spin_unlock_irqrestore(&gpt->lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(mpc52xx_gpt_stop_timer);
+
+/**
+ * mpc52xx_gpt_timer_period - Read the timer period
+ * @gpt: Pointer to gpt private data structure
+ *
+ * Returns the timer period in ns
+ */
+u64 mpc52xx_gpt_timer_period(struct mpc52xx_gpt_priv *gpt)
+{
+	u64 period;
+	u64 prescale;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpt->lock, flags);
+	period = in_be32(&gpt->regs->count);
+	spin_unlock_irqrestore(&gpt->lock, flags);
+
+	prescale = period >> 16;
+	period &= 0xffff;
+	if (prescale == 0)
+		prescale = 0x10000;
+	period = period * prescale * 1000000000ULL;
+	do_div(period, (u64)gpt->ipb_freq);
+	return period;
+}
+EXPORT_SYMBOL(mpc52xx_gpt_timer_period);
+
+#if defined(CONFIG_MPC5200_WDT)
+/***********************************************************************
+ * Watchdog API for gpt0
+ */
+
+#define WDT_IDENTITY	    "mpc52xx watchdog on GPT0"
+
+/* wdt_is_active stores wether or not the /dev/watchdog device is opened */
+static unsigned long wdt_is_active;
+
+/* wdt-capable gpt */
+static struct mpc52xx_gpt_priv *mpc52xx_gpt_wdt;
+
+/* low-level wdt functions */
+static inline void mpc52xx_gpt_wdt_ping(struct mpc52xx_gpt_priv *gpt_wdt)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpt_wdt->lock, flags);
+	out_8((u8 *) &gpt_wdt->regs->mode, MPC52xx_GPT_MODE_WDT_PING);
+	spin_unlock_irqrestore(&gpt_wdt->lock, flags);
+}
+
+/* wdt misc device api */
+static ssize_t mpc52xx_wdt_write(struct file *file, const char __user *data,
+				 size_t len, loff_t *ppos)
+{
+	struct mpc52xx_gpt_priv *gpt_wdt = file->private_data;
+	mpc52xx_gpt_wdt_ping(gpt_wdt);
+	return 0;
+}
+
+static struct watchdog_info mpc5200_wdt_info = {
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity	= WDT_IDENTITY,
+};
+
+static long mpc52xx_wdt_ioctl(struct file *file, unsigned int cmd,
+			      unsigned long arg)
+{
+	struct mpc52xx_gpt_priv *gpt_wdt = file->private_data;
+	int __user *data = (int __user *)arg;
+	int timeout;
+	u64 real_timeout;
+	int ret = 0;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user(data, &mpc5200_wdt_info,
+				   sizeof(mpc5200_wdt_info));
+		if (ret)
+			ret = -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(0, data);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		mpc52xx_gpt_wdt_ping(gpt_wdt);
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(timeout, data);
+		if (ret)
+			break;
+		real_timeout = (u64) timeout * 1000000000ULL;
+		ret = mpc52xx_gpt_do_start(gpt_wdt, real_timeout, 0, 1);
+		if (ret)
+			break;
+		/* fall through and return the timeout */
+
+	case WDIOC_GETTIMEOUT:
+		/* we need to round here as to avoid e.g. the following
+		 * situation:
+		 * - timeout requested is 1 second;
+		 * - real timeout @33MHz is 999997090ns
+		 * - the int divide by 10^9 will return 0.
+		 */
+		real_timeout =
+			mpc52xx_gpt_timer_period(gpt_wdt) + 500000000ULL;
+		do_div(real_timeout, 1000000000ULL);
+		timeout = (int) real_timeout;
+		ret = put_user(timeout, data);
+		break;
+
+	default:
+		ret = -ENOTTY;
+	}
+	return ret;
+}
+
+static int mpc52xx_wdt_open(struct inode *inode, struct file *file)
+{
+	int ret;
+
+	/* sanity check */
+	if (!mpc52xx_gpt_wdt)
+		return -ENODEV;
+
+	/* /dev/watchdog can only be opened once */
+	if (test_and_set_bit(0, &wdt_is_active))
+		return -EBUSY;
+
+	/* Set and activate the watchdog with 30 seconds timeout */
+	ret = mpc52xx_gpt_do_start(mpc52xx_gpt_wdt, 30ULL * 1000000000ULL,
+				   0, 1);
+	if (ret) {
+		clear_bit(0, &wdt_is_active);
+		return ret;
+	}
+
+	file->private_data = mpc52xx_gpt_wdt;
+	return nonseekable_open(inode, file);
+}
+
+static int mpc52xx_wdt_release(struct inode *inode, struct file *file)
+{
+	/* note: releasing the wdt in NOWAYOUT-mode does not stop it */
+#if !defined(CONFIG_WATCHDOG_NOWAYOUT)
+	struct mpc52xx_gpt_priv *gpt_wdt = file->private_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpt_wdt->lock, flags);
+	clrbits32(&gpt_wdt->regs->mode,
+		  MPC52xx_GPT_MODE_COUNTER_ENABLE | MPC52xx_GPT_MODE_WDT_EN);
+	gpt_wdt->wdt_mode &= ~MPC52xx_GPT_IS_WDT;
+	spin_unlock_irqrestore(&gpt_wdt->lock, flags);
+#endif
+	clear_bit(0, &wdt_is_active);
+	return 0;
+}
+
+
+static const struct file_operations mpc52xx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= mpc52xx_wdt_write,
+	.unlocked_ioctl = mpc52xx_wdt_ioctl,
+	.open		= mpc52xx_wdt_open,
+	.release	= mpc52xx_wdt_release,
+};
+
+static struct miscdevice mpc52xx_wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &mpc52xx_wdt_fops,
+};
+
+static int __devinit mpc52xx_gpt_wdt_init(void)
+{
+	int err;
+
+	/* try to register the watchdog misc device */
+	err = misc_register(&mpc52xx_wdt_miscdev);
+	if (err)
+		pr_err("%s: cannot register watchdog device\n", WDT_IDENTITY);
+	else
+		pr_info("%s: watchdog device registered\n", WDT_IDENTITY);
+	return err;
+}
+
+static int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt,
+				 const u32 *period)
+{
+	u64 real_timeout;
+
+	/* remember the gpt for the wdt operation */
+	mpc52xx_gpt_wdt = gpt;
+
+	/* configure the wdt if the device tree contained a timeout */
+	if (!period || *period == 0)
+		return 0;
+
+	real_timeout = (u64) *period * 1000000000ULL;
+	if (mpc52xx_gpt_do_start(gpt, real_timeout, 0, 1))
+		dev_warn(gpt->dev, "starting as wdt failed\n");
+	else
+		dev_info(gpt->dev, "watchdog set to %us timeout\n", *period);
+	return 0;
+}
+
+#else
+
+static int __devinit mpc52xx_gpt_wdt_init(void)
+{
+	return 0;
+}
+
+#define mpc52xx_gpt_wdt_setup(x, y)		(0)
+
+#endif	/*  CONFIG_MPC5200_WDT	*/
+
 /* ---------------------------------------------------------------------
  * of_platform bus binding code
  */
@@ -349,6 +729,7 @@ static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev,
 
 	spin_lock_init(&gpt->lock);
 	gpt->dev = &ofdev->dev;
+	gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->node);
 	gpt->regs = of_iomap(ofdev->node, 0);
 	if (!gpt->regs) {
 		kfree(gpt);
@@ -360,6 +741,26 @@ static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev,
 	mpc52xx_gpt_gpio_setup(gpt, ofdev->node);
 	mpc52xx_gpt_irq_setup(gpt, ofdev->node);
 
+	mutex_lock(&mpc52xx_gpt_list_mutex);
+	list_add(&gpt->list, &mpc52xx_gpt_list);
+	mutex_unlock(&mpc52xx_gpt_list_mutex);
+
+	/* check if this device could be a watchdog */
+	if (of_get_property(ofdev->node, "fsl,has-wdt", NULL) ||
+	    of_get_property(ofdev->node, "has-wdt", NULL)) {
+		const u32 *on_boot_wdt;
+
+		gpt->wdt_mode = MPC52xx_GPT_CAN_WDT;
+		on_boot_wdt = of_get_property(ofdev->node, "fsl,wdt-on-boot",
+					      NULL);
+		if (on_boot_wdt) {
+			dev_info(gpt->dev, "used as watchdog\n");
+			gpt->wdt_mode |= MPC52xx_GPT_IS_WDT;
+		} else
+			dev_info(gpt->dev, "can function as watchdog\n");
+		mpc52xx_gpt_wdt_setup(gpt, on_boot_wdt);
+	}
+
 	return 0;
 }
 
@@ -394,3 +795,4 @@ static int __init mpc52xx_gpt_init(void)
 
 /* Make sure GPIOs and IRQs get set up before anyone tries to use them */
 subsys_initcall(mpc52xx_gpt_init);
+device_initcall(mpc52xx_gpt_wdt_init);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
new file mode 100644
index 000000000000..929d017535a3
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -0,0 +1,560 @@
+/*
+ * LocalPlus Bus FIFO driver for the Freescale MPC52xx.
+ *
+ * Copyright (C) 2009 Secret Lab Technologies Ltd.
+ *
+ * This file is released under the GPLv2
+ *
+ * Todo:
+ * - Add support for multiple requests to be queued.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/mpc52xx.h>
+#include <asm/time.h>
+
+#include <sysdev/bestcomm/bestcomm.h>
+#include <sysdev/bestcomm/bestcomm_priv.h>
+#include <sysdev/bestcomm/gen_bd.h>
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("MPC5200 LocalPlus FIFO device driver");
+MODULE_LICENSE("GPL");
+
+#define LPBFIFO_REG_PACKET_SIZE		(0x00)
+#define LPBFIFO_REG_START_ADDRESS	(0x04)
+#define LPBFIFO_REG_CONTROL		(0x08)
+#define LPBFIFO_REG_ENABLE		(0x0C)
+#define LPBFIFO_REG_BYTES_DONE_STATUS	(0x14)
+#define LPBFIFO_REG_FIFO_DATA		(0x40)
+#define LPBFIFO_REG_FIFO_STATUS		(0x44)
+#define LPBFIFO_REG_FIFO_CONTROL	(0x48)
+#define LPBFIFO_REG_FIFO_ALARM		(0x4C)
+
+struct mpc52xx_lpbfifo {
+	struct device *dev;
+	phys_addr_t regs_phys;
+	void __iomem *regs;
+	int irq;
+	spinlock_t lock;
+
+	struct bcom_task *bcom_tx_task;
+	struct bcom_task *bcom_rx_task;
+	struct bcom_task *bcom_cur_task;
+
+	/* Current state data */
+	struct mpc52xx_lpbfifo_request *req;
+	int dma_irqs_enabled;
+};
+
+/* The MPC5200 has only one fifo, so only need one instance structure */
+static struct mpc52xx_lpbfifo lpbfifo;
+
+/**
+ * mpc52xx_lpbfifo_kick - Trigger the next block of data to be transfered
+ */
+static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req)
+{
+	size_t transfer_size = req->size - req->pos;
+	struct bcom_bd *bd;
+	void __iomem *reg;
+	u32 *data;
+	int i;
+	int bit_fields;
+	int dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA);
+	int write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE;
+	int poll_dma = req->flags & MPC52XX_LPBFIFO_FLAG_POLL_DMA;
+
+	/* Set and clear the reset bits; is good practice in User Manual */
+	out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+
+	/* set master enable bit */
+	out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x00000001);
+	if (!dma) {
+		/* While the FIFO can be setup for transfer sizes as large as
+		 * 16M-1, the FIFO itself is only 512 bytes deep and it does
+		 * not generate interrupts for FIFO full events (only transfer
+		 * complete will raise an IRQ).  Therefore when not using
+		 * Bestcomm to drive the FIFO it needs to either be polled, or
+		 * transfers need to constrained to the size of the fifo.
+		 *
+		 * This driver restricts the size of the transfer
+		 */
+		if (transfer_size > 512)
+			transfer_size = 512;
+
+		/* Load the FIFO with data */
+		if (write) {
+			reg = lpbfifo.regs + LPBFIFO_REG_FIFO_DATA;
+			data = req->data + req->pos;
+			for (i = 0; i < transfer_size; i += 4)
+				out_be32(reg, *data++);
+		}
+
+		/* Unmask both error and completion irqs */
+		out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x00000301);
+	} else {
+		/* Choose the correct direction
+		 *
+		 * Configure the watermarks so DMA will always complete correctly.
+		 * It may be worth experimenting with the ALARM value to see if
+		 * there is a performance impacit.  However, if it is wrong there
+		 * is a risk of DMA not transferring the last chunk of data
+		 */
+		if (write) {
+			out_be32(lpbfifo.regs + LPBFIFO_REG_FIFO_ALARM, 0x1e4);
+			out_8(lpbfifo.regs + LPBFIFO_REG_FIFO_CONTROL, 7);
+			lpbfifo.bcom_cur_task = lpbfifo.bcom_tx_task;
+		} else {
+			out_be32(lpbfifo.regs + LPBFIFO_REG_FIFO_ALARM, 0x1ff);
+			out_8(lpbfifo.regs + LPBFIFO_REG_FIFO_CONTROL, 0);
+			lpbfifo.bcom_cur_task = lpbfifo.bcom_rx_task;
+
+			if (poll_dma) {
+				if (lpbfifo.dma_irqs_enabled) {
+					disable_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task));
+					lpbfifo.dma_irqs_enabled = 0;
+				}
+			} else {
+				if (!lpbfifo.dma_irqs_enabled) {
+					enable_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task));
+					lpbfifo.dma_irqs_enabled = 1;
+				}
+			}
+		}
+
+		bd = bcom_prepare_next_buffer(lpbfifo.bcom_cur_task);
+		bd->status = transfer_size;
+		if (!write) {
+			/*
+			 * In the DMA read case, the DMA doesn't complete,
+			 * possibly due to incorrect watermarks in the ALARM
+			 * and CONTROL regs. For now instead of trying to
+			 * determine the right watermarks that will make this
+			 * work, just increase the number of bytes the FIFO is
+			 * expecting.
+			 *
+			 * When submitting another operation, the FIFO will get
+			 * reset, so the condition of the FIFO waiting for a
+			 * non-existent 4 bytes will get cleared.
+			 */
+			transfer_size += 4; /* BLECH! */
+		}
+		bd->data[0] = req->data_phys + req->pos;
+		bcom_submit_next_buffer(lpbfifo.bcom_cur_task, NULL);
+
+		/* error irq & master enabled bit */
+		bit_fields = 0x00000201;
+
+		/* Unmask irqs */
+		if (write && (!poll_dma))
+			bit_fields |= 0x00000100; /* completion irq too */
+		out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, bit_fields);
+	}
+
+	/* Set transfer size, width, chip select and READ mode */
+	out_be32(lpbfifo.regs + LPBFIFO_REG_START_ADDRESS,
+		 req->offset + req->pos);
+	out_be32(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, transfer_size);
+
+	bit_fields = req->cs << 24 | 0x000008;
+	if (!write)
+		bit_fields |= 0x010000; /* read mode */
+	out_be32(lpbfifo.regs + LPBFIFO_REG_CONTROL, bit_fields);
+
+	/* Kick it off */
+	out_8(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, 0x01);
+	if (dma)
+		bcom_enable(lpbfifo.bcom_cur_task);
+}
+
+/**
+ * mpc52xx_lpbfifo_irq - IRQ handler for LPB FIFO
+ *
+ * On transmit, the dma completion irq triggers before the fifo completion
+ * triggers.  Handle the dma completion here instead of the LPB FIFO Bestcomm
+ * task completion irq becuase everyting is not really done until the LPB FIFO
+ * completion irq triggers.
+ *
+ * In other words:
+ * For DMA, on receive, the "Fat Lady" is the bestcom completion irq. on
+ * transmit, the fifo completion irq is the "Fat Lady". The opera (or in this
+ * case the DMA/FIFO operation) is not finished until the "Fat Lady" sings.
+ *
+ * Reasons for entering this routine:
+ * 1) PIO mode rx and tx completion irq
+ * 2) DMA interrupt mode tx completion irq
+ * 3) DMA polled mode tx
+ *
+ * Exit conditions:
+ * 1) Transfer aborted
+ * 2) FIFO complete without DMA; more data to do
+ * 3) FIFO complete without DMA; all data transfered
+ * 4) FIFO complete using DMA
+ *
+ * Condition 1 can occur regardless of whether or not DMA is used.
+ * It requires executing the callback to report the error and exiting
+ * immediately.
+ *
+ * Condition 2 requires programming the FIFO with the next block of data
+ *
+ * Condition 3 requires executing the callback to report completion
+ *
+ * Condition 4 means the same as 3, except that we also retrieve the bcom
+ * buffer so DMA doesn't get clogged up.
+ *
+ * To make things trickier, the spinlock must be dropped before
+ * executing the callback, otherwise we could end up with a deadlock
+ * or nested spinlock condition.  The out path is non-trivial, so
+ * extra fiddling is done to make sure all paths lead to the same
+ * outbound code.
+ */
+static irqreturn_t mpc52xx_lpbfifo_irq(int irq, void *dev_id)
+{
+	struct mpc52xx_lpbfifo_request *req;
+	u32 status = in_8(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS);
+	void __iomem *reg;
+	u32 *data;
+	int count, i;
+	int do_callback = 0;
+	u32 ts;
+	unsigned long flags;
+	int dma, write, poll_dma;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+	ts = get_tbl();
+
+	req = lpbfifo.req;
+	if (!req) {
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+		pr_err("bogus LPBFIFO IRQ\n");
+		return IRQ_HANDLED;
+	}
+
+	dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA);
+	write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE;
+	poll_dma = req->flags & MPC52XX_LPBFIFO_FLAG_POLL_DMA;
+
+	if (dma && !write) {
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+		pr_err("bogus LPBFIFO IRQ (dma and not writting)\n");
+		return IRQ_HANDLED;
+	}
+
+	if ((status & 0x01) == 0) {
+		goto out;
+	}
+
+	/* check abort bit */
+	if (status & 0x10) {
+		out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+		do_callback = 1;
+		goto out;
+	}
+
+	/* Read result from hardware */
+	count = in_be32(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS);
+	count &= 0x00ffffff;
+
+	if (!dma && !write) {
+		/* copy the data out of the FIFO */
+		reg = lpbfifo.regs + LPBFIFO_REG_FIFO_DATA;
+		data = req->data + req->pos;
+		for (i = 0; i < count; i += 4)
+			*data++ = in_be32(reg);
+	}
+
+	/* Update transfer position and count */
+	req->pos += count;
+
+	/* Decide what to do next */
+	if (req->size - req->pos)
+		mpc52xx_lpbfifo_kick(req); /* more work to do */
+	else
+		do_callback = 1;
+
+ out:
+	/* Clear the IRQ */
+	out_8(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS, 0x01);
+
+	if (dma && (status & 0x11)) {
+		/*
+		 * Count the DMA as complete only when the FIFO completion
+		 * status or abort bits are set.
+		 *
+		 * (status & 0x01) should always be the case except sometimes
+		 * when using polled DMA.
+		 *
+		 * (status & 0x10) {transfer aborted}: This case needs more
+		 * testing.
+		 */
+		bcom_retrieve_buffer(lpbfifo.bcom_cur_task, &status, NULL);
+	}
+	req->last_byte = ((u8 *)req->data)[req->size - 1];
+
+	/* When the do_callback flag is set; it means the transfer is finished
+	 * so set the FIFO as idle */
+	if (do_callback)
+		lpbfifo.req = NULL;
+
+	if (irq != 0) /* don't increment on polled case */
+		req->irq_count++;
+
+	req->irq_ticks += get_tbl() - ts;
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+	/* Spinlock is released; it is now safe to call the callback */
+	if (do_callback && req->callback)
+		req->callback(req);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * mpc52xx_lpbfifo_bcom_irq - IRQ handler for LPB FIFO Bestcomm task
+ *
+ * Only used when receiving data.
+ */
+static irqreturn_t mpc52xx_lpbfifo_bcom_irq(int irq, void *dev_id)
+{
+	struct mpc52xx_lpbfifo_request *req;
+	unsigned long flags;
+	u32 status;
+	u32 ts;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+	ts = get_tbl();
+
+	req = lpbfifo.req;
+	if (!req || (req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA)) {
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+		return IRQ_HANDLED;
+	}
+
+	if (irq != 0) /* don't increment on polled case */
+		req->irq_count++;
+
+	if (!bcom_buffer_done(lpbfifo.bcom_cur_task)) {
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+		req->buffer_not_done_cnt++;
+		if ((req->buffer_not_done_cnt % 1000) == 0)
+			pr_err("transfer stalled\n");
+
+		return IRQ_HANDLED;
+	}
+
+	bcom_retrieve_buffer(lpbfifo.bcom_cur_task, &status, NULL);
+
+	req->last_byte = ((u8 *)req->data)[req->size - 1];
+
+	req->pos = status & 0x00ffffff;
+
+	/* Mark the FIFO as idle */
+	lpbfifo.req = NULL;
+
+	/* Release the lock before calling out to the callback. */
+	req->irq_ticks += get_tbl() - ts;
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+	if (req->callback)
+		req->callback(req);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * mpc52xx_lpbfifo_bcom_poll - Poll for DMA completion
+ */
+void mpc52xx_lpbfifo_poll(void)
+{
+	struct mpc52xx_lpbfifo_request *req = lpbfifo.req;
+	int dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA);
+	int write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE;
+
+	/*
+	 * For more information, see comments on the "Fat Lady" 
+	 */
+	if (dma && write)
+		mpc52xx_lpbfifo_irq(0, NULL);
+	else 
+		mpc52xx_lpbfifo_bcom_irq(0, NULL);
+}
+EXPORT_SYMBOL(mpc52xx_lpbfifo_poll);
+
+/**
+ * mpc52xx_lpbfifo_submit - Submit an LPB FIFO transfer request.
+ * @req: Pointer to request structure
+ */
+int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req)
+{
+	unsigned long flags;
+
+	if (!lpbfifo.regs)
+		return -ENODEV;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+
+	/* If the req pointer is already set, then a transfer is in progress */
+	if (lpbfifo.req) {
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+		return -EBUSY;
+	}
+
+	/* Setup the transfer */
+	lpbfifo.req = req;
+	req->irq_count = 0;
+	req->irq_ticks = 0;
+	req->buffer_not_done_cnt = 0;
+	req->pos = 0;
+
+	mpc52xx_lpbfifo_kick(req);
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(mpc52xx_lpbfifo_submit);
+
+void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+	if (lpbfifo.req == req) {
+		/* Put it into reset and clear the state */
+		bcom_gen_bd_rx_reset(lpbfifo.bcom_rx_task);
+		bcom_gen_bd_tx_reset(lpbfifo.bcom_tx_task);
+		out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+		lpbfifo.req = NULL;
+	}
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+}
+EXPORT_SYMBOL(mpc52xx_lpbfifo_abort);
+
+static int __devinit
+mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match)
+{
+	struct resource res;
+	int rc = -ENOMEM;
+
+	if (lpbfifo.dev != NULL)
+		return -ENOSPC;
+
+	lpbfifo.irq = irq_of_parse_and_map(op->node, 0);
+	if (!lpbfifo.irq)
+		return -ENODEV;
+
+	if (of_address_to_resource(op->node, 0, &res))
+		return -ENODEV;
+	lpbfifo.regs_phys = res.start;
+	lpbfifo.regs = of_iomap(op->node, 0);
+	if (!lpbfifo.regs)
+		return -ENOMEM;
+
+	spin_lock_init(&lpbfifo.lock);
+
+	/* Put FIFO into reset */
+	out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+
+	/* Register the interrupt handler */
+	rc = request_irq(lpbfifo.irq, mpc52xx_lpbfifo_irq, 0,
+			 "mpc52xx-lpbfifo", &lpbfifo);
+	if (rc)
+		goto err_irq;
+
+	/* Request the Bestcomm receive (fifo --> memory) task and IRQ */
+	lpbfifo.bcom_rx_task =
+		bcom_gen_bd_rx_init(2, res.start + LPBFIFO_REG_FIFO_DATA,
+				    BCOM_INITIATOR_SCLPC, BCOM_IPR_SCLPC,
+				    16*1024*1024);
+	if (!lpbfifo.bcom_rx_task)
+		goto err_bcom_rx;
+
+	rc = request_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task),
+			 mpc52xx_lpbfifo_bcom_irq, 0,
+			 "mpc52xx-lpbfifo-rx", &lpbfifo);
+	if (rc)
+		goto err_bcom_rx_irq;
+
+	/* Request the Bestcomm transmit (memory --> fifo) task and IRQ */
+	lpbfifo.bcom_tx_task =
+		bcom_gen_bd_tx_init(2, res.start + LPBFIFO_REG_FIFO_DATA,
+				    BCOM_INITIATOR_SCLPC, BCOM_IPR_SCLPC);
+	if (!lpbfifo.bcom_tx_task)
+		goto err_bcom_tx;
+
+	lpbfifo.dev = &op->dev;
+	return 0;
+
+ err_bcom_tx:
+	free_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), &lpbfifo);
+ err_bcom_rx_irq:
+	bcom_gen_bd_rx_release(lpbfifo.bcom_rx_task);
+ err_bcom_rx:
+ err_irq:
+	iounmap(lpbfifo.regs);
+	lpbfifo.regs = NULL;
+
+	dev_err(&op->dev, "mpc52xx_lpbfifo_probe() failed\n");
+	return -ENODEV;
+}
+
+
+static int __devexit mpc52xx_lpbfifo_remove(struct of_device *op)
+{
+	if (lpbfifo.dev != &op->dev)
+		return 0;
+
+	/* Put FIFO in reset */
+	out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000);
+
+	/* Release the bestcomm transmit task */
+	free_irq(bcom_get_task_irq(lpbfifo.bcom_tx_task), &lpbfifo);
+	bcom_gen_bd_tx_release(lpbfifo.bcom_tx_task);
+	
+	/* Release the bestcomm receive task */
+	free_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), &lpbfifo);
+	bcom_gen_bd_rx_release(lpbfifo.bcom_rx_task);
+
+	free_irq(lpbfifo.irq, &lpbfifo);
+	iounmap(lpbfifo.regs);
+	lpbfifo.regs = NULL;
+	lpbfifo.dev = NULL;
+
+	return 0;
+}
+
+static struct of_device_id mpc52xx_lpbfifo_match[] __devinitconst = {
+	{ .compatible = "fsl,mpc5200-lpbfifo", },
+	{},
+};
+
+static struct of_platform_driver mpc52xx_lpbfifo_driver = {
+	.owner = THIS_MODULE,
+	.name = "mpc52xx-lpbfifo",
+	.match_table = mpc52xx_lpbfifo_match,
+	.probe = mpc52xx_lpbfifo_probe,
+	.remove = __devexit_p(mpc52xx_lpbfifo_remove),
+};
+
+/***********************************************************************
+ * Module init/exit
+ */
+static int __init mpc52xx_lpbfifo_init(void)
+{
+	pr_debug("Registering LocalPlus bus FIFO driver\n");
+	return of_register_platform_driver(&mpc52xx_lpbfifo_driver);
+}
+module_init(mpc52xx_lpbfifo_init);
+
+static void __exit mpc52xx_lpbfifo_exit(void)
+{
+	pr_debug("Unregistering LocalPlus bus FIFO driver\n");
+	of_unregister_platform_driver(&mpc52xx_lpbfifo_driver);
+}
+module_exit(mpc52xx_lpbfifo_exit);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index dd43114e9684..da110bd88346 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -100,7 +100,7 @@ const struct of_device_id mpc52xx_pci_ids[] __initdata = {
 };
 
 /* ======================================================================== */
-/* PCI configuration acess                                                  */
+/* PCI configuration access                                                 */
 /* ======================================================================== */
 
 static int
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index 480f806fd0a9..4bf4bf7b063e 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -220,7 +220,7 @@ static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type)
 }
 
 static struct irq_chip mpc52xx_extirq_irqchip = {
-	.typename = "MPC52xx External",
+	.name = "MPC52xx External",
 	.mask = mpc52xx_extirq_mask,
 	.unmask = mpc52xx_extirq_unmask,
 	.ack = mpc52xx_extirq_ack,
@@ -258,7 +258,7 @@ static void mpc52xx_main_unmask(unsigned int virq)
 }
 
 static struct irq_chip mpc52xx_main_irqchip = {
-	.typename = "MPC52xx Main",
+	.name = "MPC52xx Main",
 	.mask = mpc52xx_main_mask,
 	.mask_ack = mpc52xx_main_mask,
 	.unmask = mpc52xx_main_unmask,
@@ -291,7 +291,7 @@ static void mpc52xx_periph_unmask(unsigned int virq)
 }
 
 static struct irq_chip mpc52xx_periph_irqchip = {
-	.typename = "MPC52xx Peripherals",
+	.name = "MPC52xx Peripherals",
 	.mask = mpc52xx_periph_mask,
 	.mask_ack = mpc52xx_periph_mask,
 	.unmask = mpc52xx_periph_unmask,
@@ -335,7 +335,7 @@ static void mpc52xx_sdma_ack(unsigned int virq)
 }
 
 static struct irq_chip mpc52xx_sdma_irqchip = {
-	.typename = "MPC52xx SDMA",
+	.name = "MPC52xx SDMA",
 	.mask = mpc52xx_sdma_mask,
 	.unmask = mpc52xx_sdma_unmask,
 	.ack = mpc52xx_sdma_ack,
@@ -355,7 +355,7 @@ static int mpc52xx_is_extirq(int l1, int l2)
  * mpc52xx_irqhost_xlate - translate virq# from device tree interrupts property
  */
 static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node *ct,
-				 u32 *intspec, unsigned int intsize,
+				 const u32 *intspec, unsigned int intsize,
 				 irq_hw_number_t *out_hwirq,
 				 unsigned int *out_flags)
 {
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index 7ee979f323d1..9d962d7c72c1 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -69,7 +69,6 @@ static void pq2ads_pci_unmask_irq(unsigned int virq)
 }
 
 static struct irq_chip pq2ads_pci_ic = {
-	.typename = "PQ2 ADS PCI",
 	.name = "PQ2 ADS PCI",
 	.end = pq2ads_pci_unmask_irq,
 	.mask = pq2ads_pci_mask_irq,
@@ -107,7 +106,7 @@ static void pq2ads_pci_irq_demux(unsigned int irq, struct irq_desc *desc)
 static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
 			    irq_hw_number_t hw)
 {
-	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	irq_to_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_data(virq, h->host_data);
 	set_irq_chip_and_handler(virq, &pq2ads_pci_ic, handle_level_irq);
 	return 0;
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index 567ded7c3b9b..17f99745f0e4 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -74,7 +74,7 @@ static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
 
 		prop = of_get_property(np, "mode", NULL);
 		if (prop && !strcmp(prop, "cpu-qe"))
-			pdata.qe_mode = 1;
+			pdata.flags = SPI_QE_CPU_MODE;
 
 		for (j = 0; j < num_board_infos; j++) {
 			if (board_infos[j].bus_num == pdata.bus_num)
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index 08e65fc8b98c..d306f07b9aa1 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -96,6 +96,7 @@ int fsl_deep_sleep(void)
 {
 	return deep_sleeping;
 }
+EXPORT_SYMBOL(fsl_deep_sleep);
 
 static int mpc83xx_change_state(void)
 {
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index d3a975e8fd3e..d95121894eb7 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -1,6 +1,7 @@
-menuconfig MPC85xx
-	bool "Machine Type"
-	depends on PPC_85xx
+menuconfig FSL_SOC_BOOKE
+	bool "Freescale Book-E Machine Type"
+	depends on PPC_85xx || PPC_BOOK3E
+	select FSL_SOC
 	select PPC_UDBG_16550
 	select MPIC
 	select PPC_PCI_CHOICE
@@ -8,7 +9,7 @@ menuconfig MPC85xx
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
 	default y
 
-if MPC85xx
+if FSL_SOC_BOOKE
 
 config MPC8540_ADS
 	bool "Freescale MPC8540 ADS"
@@ -144,7 +145,19 @@ config SBC8560
 	help
 	  This option enables support for the Wind River SBC8560 board
 
-endif # MPC85xx
+config P4080_DS
+	bool "Freescale P4080 DS"
+	select DEFAULT_UIMAGE
+	select PPC_FSL_BOOK3E
+	select PPC_E500MC
+	select PHYS_64BIT
+	select SWIOTLB
+	select MPC8xxx_GPIO
+	select HAS_RAPIDIO
+	help
+	  This option enables support for the P4080 DS board
+
+endif # FSL_SOC_BOOKE
 
 config TQM85xx
 	bool
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 9098aea0cf32..387c128f2c8c 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_MPC8536_DS)  += mpc8536_ds.o
 obj-$(CONFIG_MPC85xx_DS)  += mpc85xx_ds.o
 obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
 obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
+obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
 obj-$(CONFIG_SBC8560)     += sbc8560.o
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
new file mode 100644
index 000000000000..534c2ecc89d9
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -0,0 +1,125 @@
+/*
+ * Corenet based SoC DS Setup
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/lmb.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+void __init corenet_ds_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np = NULL;
+	unsigned int flags = MPIC_PRIMARY | MPIC_BIG_ENDIAN |
+				MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU;
+
+	np = of_find_node_by_type(np, "open-pic");
+
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Failed to map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	if (ppc_md.get_irq == mpic_get_coreint_irq)
+		flags |= MPIC_ENABLE_COREINT;
+
+	mpic = mpic_alloc(np, r.start, flags, 0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+
+	mpic_init(mpic);
+}
+
+#ifdef CONFIG_PCI
+static int primary_phb_addr;
+#endif
+
+/*
+ * Setup the architecture
+ */
+#ifdef CONFIG_SMP
+void __init mpc85xx_smp_init(void);
+#endif
+
+void __init corenet_ds_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+	struct pci_controller *hose;
+#endif
+	dma_addr_t max = 0xffffffff;
+
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,p4080-pcie") {
+		struct resource rsrc;
+		of_address_to_resource(np, 0, &rsrc);
+		if ((rsrc.start & 0xfffff) == primary_phb_addr)
+			fsl_add_bridge(np, 1);
+		else
+			fsl_add_bridge(np, 0);
+
+		hose = pci_find_hose_for_OF_device(np);
+		max = min(max, hose->dma_window_base_cur +
+				hose->dma_window_size);
+	}
+#endif
+
+#ifdef CONFIG_SWIOTLB
+	if (lmb_end_of_DRAM() > max) {
+		ppc_swiotlb_enable = 1;
+		set_pci_dma_ops(&swiotlb_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	}
+#endif
+	pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
+}
+
+static const struct of_device_id of_device_ids[] __devinitconst = {
+	{
+		.compatible	= "simple-bus"
+	},
+	{
+		.compatible	= "fsl,rapidio-delta",
+	},
+	{}
+};
+
+int __init corenet_ds_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, of_device_ids, NULL);
+}
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.h b/arch/powerpc/platforms/85xx/corenet_ds.h
new file mode 100644
index 000000000000..ddd700b23031
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/corenet_ds.h
@@ -0,0 +1,19 @@
+/*
+ * Corenet based SoC DS Setup
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef CORENET_DS_H
+#define CORENET_DS_H
+
+extern void __init corenet_ds_pic_init(void);
+extern void __init corenet_ds_setup_arch(void);
+extern int __init corenet_ds_publish_devices(void);
+
+#endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 3909d57b86e3..c5028a2e5a58 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -301,6 +301,7 @@ static struct of_device_id mpc85xx_ids[] = {
 	{ .compatible = "fsl,qe", },
 	{ .compatible = "gianfar", },
 	{ .compatible = "fsl,rapidio-delta", },
+	{ .compatible = "fsl,mpc8548-guts", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index c8468de4acf6..088f30b0c088 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -44,6 +44,7 @@ void __init mpc85xx_rdb_pic_init(void)
 	struct mpic *mpic;
 	struct resource r;
 	struct device_node *np;
+	unsigned long root = of_get_flat_dt_root();
 
 	np = of_find_node_by_type(NULL, "open-pic");
 	if (np == NULL) {
@@ -57,11 +58,18 @@ void __init mpc85xx_rdb_pic_init(void)
 		return;
 	}
 
-	mpic = mpic_alloc(np, r.start,
+	if (of_flat_dt_is_compatible(root, "fsl,85XXRDB-CAMP")) {
+		mpic = mpic_alloc(np, r.start,
+			MPIC_PRIMARY |
+			MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+			0, 256, " OpenPIC  ");
+	} else {
+		mpic = mpic_alloc(np, r.start,
 		  MPIC_PRIMARY | MPIC_WANTS_RESET |
 		  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
 		  MPIC_SINGLE_DEST_CPU,
 		  0, 256, " OpenPIC  ");
+	}
 
 	BUG_ON(mpic == NULL);
 	of_node_put(np);
@@ -113,6 +121,7 @@ static int __init mpc85xxrdb_publish_devices(void)
 	return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
 }
 machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
+machine_device_initcall(p1020_rdb, mpc85xxrdb_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -126,6 +135,15 @@ static int __init p2020_rdb_probe(void)
 	return 0;
 }
 
+static int __init p1020_rdb_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,P1020RDB"))
+		return 1;
+	return 0;
+}
+
 define_machine(p2020_rdb) {
 	.name			= "P2020 RDB",
 	.probe			= p2020_rdb_probe,
@@ -139,3 +157,17 @@ define_machine(p2020_rdb) {
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
 };
+
+define_machine(p1020_rdb) {
+	.name			= "P1020 RDB",
+	.probe			= p1020_rdb_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/p4080_ds.c b/arch/powerpc/platforms/85xx/p4080_ds.c
new file mode 100644
index 000000000000..84170460497b
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/p4080_ds.c
@@ -0,0 +1,74 @@
+/*
+ * P4080 DS Setup
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "corenet_ds.h"
+
+#ifdef CONFIG_PCI
+static int primary_phb_addr;
+#endif
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p4080_ds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,P4080DS")) {
+#ifdef CONFIG_PCI
+		/* treat PCIe1 as primary,
+		 * shouldn't matter as we have no ISA on the board
+		 */
+		primary_phb_addr = 0x0000;
+#endif
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+define_machine(p4080_ds) {
+	.name			= "P4080 DS",
+	.probe			= p4080_ds_probe,
+	.setup_arch		= corenet_ds_setup_arch,
+	.init_IRQ		= corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_coreint_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
+machine_device_initcall(p4080_ds, corenet_ds_publish_devices);
+machine_arch_initcall(p4080_ds, swiotlb_setup_bus_notifier);
diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
index 60edf63d0157..e5da5f62b24a 100644
--- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
+++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -232,7 +232,7 @@ static int socrates_fpga_pic_set_type(unsigned int virq,
 }
 
 static struct irq_chip socrates_fpga_pic_chip = {
-	.typename       = " FPGA-PIC ",
+	.name		= " FPGA-PIC ",
 	.ack		= socrates_fpga_pic_ack,
 	.mask           = socrates_fpga_pic_mask,
 	.mask_ack       = socrates_fpga_pic_mask_ack,
@@ -245,7 +245,7 @@ static int socrates_fpga_pic_host_map(struct irq_host *h, unsigned int virq,
 		irq_hw_number_t hwirq)
 {
 	/* All interrupts are LEVEL sensitive */
-	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	irq_to_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_and_handler(virq, &socrates_fpga_pic_chip,
 			handle_fasteoi_irq);
 
@@ -253,7 +253,7 @@ static int socrates_fpga_pic_host_map(struct irq_host *h, unsigned int virq,
 }
 
 static int socrates_fpga_pic_host_xlate(struct irq_host *h,
-		struct device_node *ct,	u32 *intspec, unsigned int intsize,
+		struct device_node *ct,	const u32 *intspec, unsigned int intsize,
 		irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 {
 	struct socrates_fpga_irq_info *fpga_irq = &fpga_irqs[intspec[0]];
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 9c7b64a3402b..2bbfd530d6d8 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -35,6 +35,7 @@ config MPC8610_HPCD
 config GEF_PPC9A
 	bool "GE Fanuc PPC9A"
 	select DEFAULT_UIMAGE
+	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
@@ -43,6 +44,7 @@ config GEF_PPC9A
 config GEF_SBC310
 	bool "GE Fanuc SBC310"
 	select DEFAULT_UIMAGE
+	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
@@ -51,6 +53,7 @@ config GEF_SBC310
 config GEF_SBC610
 	bool "GE Fanuc SBC610"
 	select DEFAULT_UIMAGE
+	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	select HAS_RAPIDIO
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c
index 50d0a2b63809..0110a8736d33 100644
--- a/arch/powerpc/platforms/86xx/gef_pic.c
+++ b/arch/powerpc/platforms/86xx/gef_pic.c
@@ -149,7 +149,7 @@ static void gef_pic_unmask(unsigned int virq)
 }
 
 static struct irq_chip gef_pic_chip = {
-	.typename	= "gefp",
+	.name		= "gefp",
 	.mask		= gef_pic_mask,
 	.mask_ack	= gef_pic_mask_ack,
 	.unmask		= gef_pic_unmask,
@@ -163,14 +163,14 @@ static int gef_pic_host_map(struct irq_host *h, unsigned int virq,
 			  irq_hw_number_t hwirq)
 {
 	/* All interrupts are LEVEL sensitive */
-	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	irq_to_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_and_handler(virq, &gef_pic_chip, handle_level_irq);
 
 	return 0;
 }
 
 static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct,
-			    u32 *intspec, unsigned int intsize,
+			    const u32 *intspec, unsigned int intsize,
 			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 {
 
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index 287f7bd17dd9..a792e5d85813 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -33,6 +33,7 @@
 #include <asm/udbg.h>
 
 #include <asm/mpic.h>
+#include <asm/nvram.h>
 
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
@@ -95,6 +96,10 @@ static void __init gef_ppc9a_setup_arch(void)
 			printk(KERN_WARNING "Unable to map board registers\n");
 		of_node_put(regs);
 	}
+
+#if defined(CONFIG_MMIO_NVRAM)
+	mmio_nvram_init();
+#endif
 }
 
 /* Return the PCB revision */
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 90754e752bd8..6a1a613836c2 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -33,6 +33,7 @@
 #include <asm/udbg.h>
 
 #include <asm/mpic.h>
+#include <asm/nvram.h>
 
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
@@ -95,6 +96,10 @@ static void __init gef_sbc310_setup_arch(void)
 			printk(KERN_WARNING "Unable to map board registers\n");
 		of_node_put(regs);
 	}
+
+#if defined(CONFIG_MMIO_NVRAM)
+	mmio_nvram_init();
+#endif
 }
 
 /* Return the PCB revision */
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index 72b31a6010a0..e10688a0fc4e 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -33,6 +33,7 @@
 #include <asm/udbg.h>
 
 #include <asm/mpic.h>
+#include <asm/nvram.h>
 
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
@@ -95,6 +96,10 @@ static void __init gef_sbc610_setup_arch(void)
 			printk(KERN_WARNING "Unable to map board registers\n");
 		of_node_put(regs);
 	}
+
+#if defined(CONFIG_MMIO_NVRAM)
+	mmio_nvram_init();
+#endif
 }
 
 /* Return the PCB revision */
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 627908a4cd77..5abe137f6309 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -19,6 +19,7 @@
 #include <linux/stddef.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/interrupt.h>
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
@@ -41,10 +42,46 @@
 
 #include "mpc86xx.h"
 
+static struct device_node *pixis_node;
 static unsigned char *pixis_bdcfg0, *pixis_arch;
 
+#ifdef CONFIG_SUSPEND
+static irqreturn_t mpc8610_sw9_irq(int irq, void *data)
+{
+	pr_debug("%s: PIXIS' event (sw9/wakeup) IRQ handled\n", __func__);
+	return IRQ_HANDLED;
+}
+
+static void __init mpc8610_suspend_init(void)
+{
+	int irq;
+	int ret;
+
+	if (!pixis_node)
+		return;
+
+	irq = irq_of_parse_and_map(pixis_node, 0);
+	if (!irq) {
+		pr_err("%s: can't map pixis event IRQ.\n", __func__);
+		return;
+	}
+
+	ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9/wakeup", NULL);
+	if (ret) {
+		pr_err("%s: can't request pixis event IRQ: %d\n",
+		       __func__, ret);
+		irq_dispose_mapping(irq);
+	}
+
+	enable_irq_wake(irq);
+}
+#else
+static inline void mpc8610_suspend_init(void) { }
+#endif /* CONFIG_SUSPEND */
+
 static struct of_device_id __initdata mpc8610_ids[] = {
 	{ .compatible = "fsl,mpc8610-immr", },
+	{ .compatible = "fsl,mpc8610-guts", },
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
 	{}
@@ -55,6 +92,9 @@ static int __init mpc8610_declare_of_platform_devices(void)
 	/* Firstly, register PIXIS GPIOs. */
 	simple_gpiochip_init("fsl,fpga-pixis-gpio-bank");
 
+	/* Enable wakeup on PIXIS' event IRQ. */
+	mpc8610_suspend_init();
+
 	/* Without this call, the SSI device driver won't get probed. */
 	of_platform_bus_probe(NULL, mpc8610_ids, NULL);
 
@@ -250,10 +290,10 @@ static void __init mpc86xx_hpcd_setup_arch(void)
 	diu_ops.set_sysfs_monitor_port	= mpc8610hpcd_set_sysfs_monitor_port;
 #endif
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
-	if (np) {
-		of_address_to_resource(np, 0, &r);
-		of_node_put(np);
+	pixis_node = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
+	if (pixis_node) {
+		of_address_to_resource(pixis_node, 0, &r);
+		of_node_put(pixis_node);
 		pixis = ioremap(r.start, 32);
 		if (!pixis) {
 			printk(KERN_ERR "Err: can't map FPGA cfg register!\n");
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index 385acfc48397..242954c4293f 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -222,7 +222,7 @@ static void cpm_cascade(unsigned int irq, struct irq_desc *desc)
 	int cascade_irq;
 
 	if ((cascade_irq = cpm_get_irq()) >= 0) {
-		struct irq_desc *cdesc = irq_desc + cascade_irq;
+		struct irq_desc *cdesc = irq_to_desc(cascade_irq);
 
 		generic_handle_irq(cascade_irq);
 		cdesc->chip->eoi(cascade_irq);
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 04a8061045c4..d1663db7810f 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -86,6 +86,11 @@ config RTAS_ERROR_LOGGING
 	depends on PPC_RTAS
 	default n
 
+config PPC_RTAS_DAEMON
+	bool
+	depends on PPC_RTAS
+	default n
+
 config RTAS_PROC
 	bool "Proc interface to RTAS"
 	depends on PPC_RTAS
@@ -255,7 +260,7 @@ config QE_GPIO
 
 config CPM2
 	bool "Enable support for the CPM2 (Communications Processor Module)"
-	depends on MPC85xx || 8260
+	depends on (FSL_SOC_BOOKE && PPC32) || 8260
 	select CPM
 	select PPC_LIB_RHEAP
 	select PPC_PCI_CHOICE
@@ -300,7 +305,7 @@ source "arch/powerpc/sysdev/bestcomm/Kconfig"
 
 config MPC8xxx_GPIO
 	bool "MPC8xxx GPIO support"
-	depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || PPC_85xx || PPC_86xx
+	depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || FSL_SOC_BOOKE || PPC_86xx
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index e382cae678b8..2eab27a94cc9 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -28,8 +28,6 @@ config PPC_BOOK3S_32
 config PPC_85xx
 	bool "Freescale 85xx"
 	select E500
-	select FSL_SOC
-	select MPC85xx
 
 config PPC_8xx
 	bool "Freescale 8xx"
@@ -138,6 +136,14 @@ config PPC_FPU
 	bool
 	default y if PPC64
 
+config FSL_EMB_PERFMON
+	bool "Freescale Embedded Perfmon"
+	depends on E500 || PPC_83xx
+	help
+	  This is the Performance Monitor support found on the e500 core
+	  and some e300 cores (c3 and c4).  Select this only if your
+	  core supports the Embedded Performance Monitor APU
+
 config 4xx
 	bool
 	depends on 40x || 44x
@@ -153,13 +159,6 @@ config FSL_BOOKE
 	depends on E200 || E500
 	default y
 
-config FSL_EMB_PERFMON
-	bool "Freescale Embedded Perfmon"
-	depends on E500 || PPC_83xx
-	help
-	  This is the Performance Monitor support found on the e500 core
-	  and some e300 cores (c3 and c4).  Select this only if your
-	  core supports the Embedded Performance Monitor APU
 
 config PTE_64BIT
 	bool
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index a6812ee00100..fdb9f0b0d7a8 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_PPC_MPC52xx)	+= 52xx/
 obj-$(CONFIG_PPC_8xx)		+= 8xx/
 obj-$(CONFIG_PPC_82xx)		+= 82xx/
 obj-$(CONFIG_PPC_83xx)		+= 83xx/
-obj-$(CONFIG_PPC_85xx)		+= 85xx/
+obj-$(CONFIG_FSL_SOC_BOOKE)	+= 85xx/
 obj-$(CONFIG_PPC_86xx)		+= 86xx/
 obj-$(CONFIG_PPC_PSERIES)	+= pseries/
 obj-$(CONFIG_PPC_ISERIES)	+= iseries/
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index a86c34b3bb84..96fe896f6df3 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -312,7 +312,7 @@ static struct irq_chip msic_irq_chip = {
 	.mask		= mask_msi_irq,
 	.unmask		= unmask_msi_irq,
 	.shutdown	= unmask_msi_irq,
-	.typename	= "AXON-MSI",
+	.name		= "AXON-MSI",
 };
 
 static int msic_host_map(struct irq_host *h, unsigned int virq,
diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c
index 72254848a228..36052a9ebcda 100644
--- a/arch/powerpc/platforms/cell/beat_interrupt.c
+++ b/arch/powerpc/platforms/cell/beat_interrupt.c
@@ -110,7 +110,7 @@ static void beatic_end_irq(unsigned int irq_plug)
 }
 
 static struct irq_chip beatic_pic = {
-	.typename = " CELL-BEAT ",
+	.name = " CELL-BEAT ",
 	.unmask = beatic_unmask_irq,
 	.mask = beatic_mask_irq,
 	.eoi = beatic_end_irq,
@@ -136,7 +136,7 @@ static void beatic_pic_host_unmap(struct irq_host *h, unsigned int virq)
 static int beatic_pic_host_map(struct irq_host *h, unsigned int virq,
 			       irq_hw_number_t hw)
 {
-	struct irq_desc *desc = get_irq_desc(virq);
+	struct irq_desc *desc = irq_to_desc(virq);
 	int64_t	err;
 
 	err = beat_construct_and_connect_irq_plug(virq, hw);
@@ -166,11 +166,11 @@ static void beatic_pic_host_remap(struct irq_host *h, unsigned int virq,
  * Note: We have only 1 entry to translate.
  */
 static int beatic_pic_host_xlate(struct irq_host *h, struct device_node *ct,
-				 u32 *intspec, unsigned int intsize,
+				 const u32 *intspec, unsigned int intsize,
 				 irq_hw_number_t *out_hwirq,
 				 unsigned int *out_flags)
 {
-	u64 *intspec2 = (u64 *)intspec;
+	const u64 *intspec2 = (const u64 *)intspec;
 
 	*out_hwirq = *intspec2;
 	*out_flags |= IRQ_TYPE_LEVEL_LOW;
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 882e47080e74..f9dbf76a763f 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -88,7 +88,7 @@ static void iic_eoi(unsigned int irq)
 }
 
 static struct irq_chip iic_chip = {
-	.typename = " CELL-IIC ",
+	.name = " CELL-IIC ",
 	.mask = iic_mask,
 	.unmask = iic_unmask,
 	.eoi = iic_eoi,
@@ -133,7 +133,7 @@ static void iic_ioexc_cascade(unsigned int irq, struct irq_desc *desc)
 
 
 static struct irq_chip iic_ioexc_chip = {
-	.typename = " CELL-IOEX",
+	.name = " CELL-IOEX",
 	.mask = iic_mask,
 	.unmask = iic_unmask,
 	.eoi = iic_ioexc_eoi,
@@ -297,7 +297,7 @@ static int iic_host_map(struct irq_host *h, unsigned int virq,
 }
 
 static int iic_host_xlate(struct irq_host *h, struct device_node *ct,
-			   u32 *intspec, unsigned int intsize,
+			   const u32 *intspec, unsigned int intsize,
 			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 
 {
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 4e5655624ae8..01244f254a11 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -102,7 +102,7 @@ static void spider_ack_irq(unsigned int virq)
 
 	/* Reset edge detection logic if necessary
 	 */
-	if (get_irq_desc(virq)->status & IRQ_LEVEL)
+	if (irq_to_desc(virq)->status & IRQ_LEVEL)
 		return;
 
 	/* Only interrupts 47 to 50 can be set to edge */
@@ -119,7 +119,7 @@ static int spider_set_irq_type(unsigned int virq, unsigned int type)
 	struct spider_pic *pic = spider_virq_to_pic(virq);
 	unsigned int hw = irq_map[virq].hwirq;
 	void __iomem *cfg = spider_get_irq_config(pic, hw);
-	struct irq_desc *desc = get_irq_desc(virq);
+	struct irq_desc *desc = irq_to_desc(virq);
 	u32 old_mask;
 	u32 ic;
 
@@ -168,7 +168,7 @@ static int spider_set_irq_type(unsigned int virq, unsigned int type)
 }
 
 static struct irq_chip spider_pic = {
-	.typename = " SPIDER   ",
+	.name = " SPIDER   ",
 	.unmask = spider_unmask_irq,
 	.mask = spider_mask_irq,
 	.ack = spider_ack_irq,
@@ -187,7 +187,7 @@ static int spider_host_map(struct irq_host *h, unsigned int virq,
 }
 
 static int spider_host_xlate(struct irq_host *h, struct device_node *ct,
-			   u32 *intspec, unsigned int intsize,
+			   const u32 *intspec, unsigned int intsize,
 			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 
 {
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 884e8bcec499..64a4c2d85f7c 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -2494,7 +2494,7 @@ static ssize_t spufs_switch_log_read(struct file *file, char __user *buf,
 	struct spu_context *ctx = SPUFS_I(inode)->i_ctx;
 	int error = 0, cnt = 0;
 
-	if (!buf || len < 0)
+	if (!buf)
 		return -EINVAL;
 
 	error = spu_acquire(ctx);
diff --git a/arch/powerpc/platforms/chrp/Kconfig b/arch/powerpc/platforms/chrp/Kconfig
index 37d438bd5b7a..bc0b0efdc5fe 100644
--- a/arch/powerpc/platforms/chrp/Kconfig
+++ b/arch/powerpc/platforms/chrp/Kconfig
@@ -5,6 +5,8 @@ config PPC_CHRP
 	select PPC_I8259
 	select PPC_INDIRECT_PCI
 	select PPC_RTAS
+	select PPC_RTAS_DAEMON
+	select RTAS_ERROR_LOGGING
 	select PPC_MPC106
 	select PPC_UDBG_16550
 	select PPC_NATIVE
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index cd4ad9aea760..52f3df3b4ca0 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -364,19 +364,6 @@ void __init chrp_setup_arch(void)
 	if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
 }
 
-void
-chrp_event_scan(unsigned long unused)
-{
-	unsigned char log[1024];
-	int ret = 0;
-
-	/* XXX: we should loop until the hardware says no more error logs -- Cort */
-	rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0,
-		  __pa(log), 1024);
-	mod_timer(&__get_cpu_var(heartbeat_timer),
-		  jiffies + event_scan_interval);
-}
-
 static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int cascade_irq = i8259_irq();
@@ -568,9 +555,6 @@ void __init chrp_init_IRQ(void)
 void __init
 chrp_init2(void)
 {
-	struct device_node *device;
-	const unsigned int *p = NULL;
-
 #ifdef CONFIG_NVRAM
 	chrp_nvram_init();
 #endif
@@ -582,40 +566,6 @@ chrp_init2(void)
 	request_region(0x80,0x10,"dma page reg");
 	request_region(0xc0,0x20,"dma2");
 
-	/* Get the event scan rate for the rtas so we know how
-	 * often it expects a heartbeat. -- Cort
-	 */
-	device = of_find_node_by_name(NULL, "rtas");
-	if (device)
-		p = of_get_property(device, "rtas-event-scan-rate", NULL);
-	if (p && *p) {
-		/*
-		 * Arrange to call chrp_event_scan at least *p times
-		 * per minute.  We use 59 rather than 60 here so that
-		 * the rate will be slightly higher than the minimum.
-		 * This all assumes we don't do hotplug CPU on any
-		 * machine that needs the event scans done.
-		 */
-		unsigned long interval, offset;
-		int cpu, ncpus;
-		struct timer_list *timer;
-
-		interval = HZ * 59 / *p;
-		offset = HZ;
-		ncpus = num_online_cpus();
-		event_scan_interval = ncpus * interval;
-		for (cpu = 0; cpu < ncpus; ++cpu) {
-			timer = &per_cpu(heartbeat_timer, cpu);
-			setup_timer(timer, chrp_event_scan, 0);
-			timer->expires = jiffies + offset;
-			add_timer_on(timer, cpu);
-			offset += interval;
-		}
-		printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
-		       *p, interval);
-	}
-	of_node_put(device);
-
 	if (ppc_md.progress)
 		ppc_md.progress("  Have fun!    ", 0x7777);
 }
diff --git a/arch/powerpc/platforms/iseries/htab.c b/arch/powerpc/platforms/iseries/htab.c
index f99c6c4b6985..3ae66ab9d5e7 100644
--- a/arch/powerpc/platforms/iseries/htab.c
+++ b/arch/powerpc/platforms/iseries/htab.c
@@ -19,8 +19,7 @@
 
 #include "call_hpt.h"
 
-static spinlock_t iSeries_hlocks[64] __cacheline_aligned_in_smp =
-	{ [0 ... 63] = SPIN_LOCK_UNLOCKED};
+static spinlock_t iSeries_hlocks[64] __cacheline_aligned_in_smp;
 
 /*
  * Very primitive algorithm for picking up a lock
@@ -245,6 +244,11 @@ static void iSeries_hpte_invalidate(unsigned long slot, unsigned long va,
 
 void __init hpte_init_iSeries(void)
 {
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(iSeries_hlocks); i++)
+		spin_lock_init(&iSeries_hlocks[i]);
+
 	ppc_md.hpte_invalidate	= iSeries_hpte_invalidate;
 	ppc_md.hpte_updatepp	= iSeries_hpte_updatepp;
 	ppc_md.hpte_updateboltedpp = iSeries_hpte_updateboltedpp;
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index 94f444758836..07762259c60a 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -214,7 +214,7 @@ void __init iSeries_activate_IRQs()
 	unsigned long flags;
 
 	for_each_irq (irq) {
-		struct irq_desc *desc = get_irq_desc(irq);
+		struct irq_desc *desc = irq_to_desc(irq);
 
 		if (desc && desc->chip && desc->chip->startup) {
 			spin_lock_irqsave(&desc->lock, flags);
@@ -273,7 +273,7 @@ static void iseries_end_IRQ(unsigned int irq)
 }
 
 static struct irq_chip iseries_pic = {
-	.typename	= "iSeries irq controller",
+	.name	= "iSeries irq controller",
 	.startup	= iseries_startup_IRQ,
 	.shutdown	= iseries_shutdown_IRQ,
 	.unmask		= iseries_enable_IRQ,
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 414ca9849f23..345e2da56767 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -42,6 +42,7 @@
 #include <linux/interrupt.h>
 #include <linux/timer.h>
 #include <linux/mutex.h>
+#include <linux/i2c.h>
 #include <asm/keylargo.h>
 #include <asm/uninorth.h>
 #include <asm/io.h>
@@ -80,7 +81,7 @@ struct pmac_i2c_bus
 	struct device_node	*busnode;
 	int			type;
 	int			flags;
-	struct i2c_adapter	*adapter;
+	struct i2c_adapter	adapter;
 	void			*hostdata;
 	int			channel;	/* some hosts have multiple */
 	int			mode;		/* current mode */
@@ -1014,25 +1015,9 @@ int pmac_i2c_get_channel(struct pmac_i2c_bus *bus)
 EXPORT_SYMBOL_GPL(pmac_i2c_get_channel);
 
 
-void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
-			     struct i2c_adapter *adapter)
-{
-	WARN_ON(bus->adapter != NULL);
-	bus->adapter = adapter;
-}
-EXPORT_SYMBOL_GPL(pmac_i2c_attach_adapter);
-
-void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
-			     struct i2c_adapter *adapter)
-{
-	WARN_ON(bus->adapter != adapter);
-	bus->adapter = NULL;
-}
-EXPORT_SYMBOL_GPL(pmac_i2c_detach_adapter);
-
 struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus)
 {
-	return bus->adapter;
+	return &bus->adapter;
 }
 EXPORT_SYMBOL_GPL(pmac_i2c_get_adapter);
 
@@ -1041,7 +1026,7 @@ struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter)
 	struct pmac_i2c_bus *bus;
 
 	list_for_each_entry(bus, &pmac_i2c_busses, link)
-		if (bus->adapter == adapter)
+		if (&bus->adapter == adapter)
 			return bus;
 	return NULL;
 }
@@ -1053,7 +1038,7 @@ int pmac_i2c_match_adapter(struct device_node *dev, struct i2c_adapter *adapter)
 
 	if (bus == NULL)
 		return 0;
-	return (bus->adapter == adapter);
+	return (&bus->adapter == adapter);
 }
 EXPORT_SYMBOL_GPL(pmac_i2c_match_adapter);
 
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index e81403b245b5..ab2027cdf893 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -302,7 +302,7 @@ static void __init setup_chaos(struct pci_controller *hose,
  *  1 -> Skip the device but act as if the access was successfull
  *       (return 0xff's on reads, eventually, cache config space
  *       accesses in a later version)
- * -1 -> Hide the device (unsuccessful acess)
+ * -1 -> Hide the device (unsuccessful access)
  */
 static int u3_ht_skip_device(struct pci_controller *hose,
 			     struct pci_bus *bus, unsigned int devfn)
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index d212006a5b3c..09e827296276 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -152,12 +152,12 @@ static unsigned int pmac_startup_irq(unsigned int virq)
         unsigned long bit = 1UL << (src & 0x1f);
         int i = src >> 5;
 
-  	spin_lock_irqsave(&pmac_pic_lock, flags);
-	if ((irq_desc[virq].status & IRQ_LEVEL) == 0)
+	spin_lock_irqsave(&pmac_pic_lock, flags);
+	if ((irq_to_desc(virq)->status & IRQ_LEVEL) == 0)
 		out_le32(&pmac_irq_hw[i]->ack, bit);
         __set_bit(src, ppc_cached_irq_mask);
         __pmac_set_irq_mask(src, 0);
-  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	spin_unlock_irqrestore(&pmac_pic_lock, flags);
 
 	return 0;
 }
@@ -195,7 +195,7 @@ static int pmac_retrigger(unsigned int virq)
 }
 
 static struct irq_chip pmac_pic = {
-	.typename	= " PMAC-PIC ",
+	.name		= " PMAC-PIC ",
 	.startup	= pmac_startup_irq,
 	.mask		= pmac_mask_irq,
 	.ack		= pmac_ack_irq,
@@ -285,7 +285,7 @@ static int pmac_pic_host_match(struct irq_host *h, struct device_node *node)
 static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
 			     irq_hw_number_t hw)
 {
-	struct irq_desc *desc = get_irq_desc(virq);
+	struct irq_desc *desc = irq_to_desc(virq);
 	int level;
 
 	if (hw >= max_irqs)
@@ -303,7 +303,7 @@ static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
 }
 
 static int pmac_pic_host_xlate(struct irq_host *h, struct device_node *ct,
-			       u32 *intspec, unsigned int intsize,
+			       const u32 *intspec, unsigned int intsize,
 			       irq_hw_number_t *out_hwirq,
 			       unsigned int *out_flags)
 
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 8ec5ccf76b19..59d9712d7364 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -152,7 +152,7 @@ static void ps3_chip_eoi(unsigned int virq)
  */
 
 static struct irq_chip ps3_irq_chip = {
-	.typename = "ps3",
+	.name = "ps3",
 	.mask = ps3_chip_mask,
 	.unmask = ps3_chip_unmask,
 	.eoi = ps3_chip_eoi,
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 189a25b80735..e81b028a2a48 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -34,7 +34,7 @@
 #if defined(DEBUG)
 #define DBG udbg_printf
 #else
-#define DBG pr_debug
+#define DBG pr_devel
 #endif
 
 enum {
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index f0e6f28427bd..27554c807fd5 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -4,6 +4,7 @@ config PPC_PSERIES
 	select MPIC
 	select PPC_I8259
 	select PPC_RTAS
+	select PPC_RTAS_DAEMON
 	select RTAS_ERROR_LOGGING
 	select PPC_UDBG_16550
 	select PPC_NATIVE
@@ -59,7 +60,7 @@ config PPC_SMLPAR
 
 config CMM
 	tristate "Collaborative memory management"
-	depends on PPC_SMLPAR && !CRASH_DUMP
+	depends on PPC_SMLPAR
 	default y
 	help
 	  Select this option, if you want to enable the kernel interface
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 790c0b872d4f..0ff5174ae4f5 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -7,8 +7,8 @@ EXTRA_CFLAGS		+= -DDEBUG
 endif
 
 obj-y			:= lpar.o hvCall.o nvram.o reconfig.o \
-			   setup.o iommu.o ras.o rtasd.o \
-			   firmware.o power.o
+			   setup.o iommu.o ras.o \
+			   firmware.o power.o dlpar.o
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_XICS)	+= xics.o
 obj-$(CONFIG_SCANLOG)	+= scanlog.o
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
index 6567439fe78d..bcdcf0ccc8d7 100644
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -229,8 +229,9 @@ static void cmm_get_mpp(void)
 {
 	int rc;
 	struct hvcall_mpp_data mpp_data;
-	unsigned long active_pages_target;
-	signed long page_loan_request;
+	signed long active_pages_target, page_loan_request, target;
+	signed long total_pages = totalram_pages + loaned_pages;
+	signed long min_mem_pages = (min_mem_mb * 1024 * 1024) / PAGE_SIZE;
 
 	rc = h_get_mpp(&mpp_data);
 
@@ -238,17 +239,25 @@ static void cmm_get_mpp(void)
 		return;
 
 	page_loan_request = div_s64((s64)mpp_data.loan_request, PAGE_SIZE);
-	loaned_pages_target = page_loan_request + loaned_pages;
-	if (loaned_pages_target > oom_freed_pages)
-		loaned_pages_target -= oom_freed_pages;
+	target = page_loan_request + (signed long)loaned_pages;
+
+	if (target < 0 || total_pages < min_mem_pages)
+		target = 0;
+
+	if (target > oom_freed_pages)
+		target -= oom_freed_pages;
 	else
-		loaned_pages_target = 0;
+		target = 0;
+
+	active_pages_target = total_pages - target;
+
+	if (min_mem_pages > active_pages_target)
+		target = total_pages - min_mem_pages;
 
-	active_pages_target = totalram_pages + loaned_pages - loaned_pages_target;
+	if (target < 0)
+		target = 0;
 
-	if ((min_mem_mb * 1024 * 1024) > (active_pages_target * PAGE_SIZE))
-		loaned_pages_target = totalram_pages + loaned_pages -
-			((min_mem_mb * 1024 * 1024) / PAGE_SIZE);
+	loaned_pages_target = target;
 
 	cmm_dbg("delta = %ld, loaned = %lu, target = %lu, oom = %lu, totalram = %lu\n",
 		page_loan_request, loaned_pages, loaned_pages_target,
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
new file mode 100644
index 000000000000..12df9e8812a9
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -0,0 +1,558 @@
+/*
+ * Support for dynamic reconfiguration for PCI, Memory, and CPU
+ * Hotplug and Dynamic Logical Partitioning on RPA platforms.
+ *
+ * Copyright (C) 2009 Nathan Fontenot
+ * Copyright (C) 2009 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/notifier.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <linux/cpu.h>
+#include "offline_states.h"
+
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/uaccess.h>
+#include <asm/rtas.h>
+#include <asm/pSeries_reconfig.h>
+
+struct cc_workarea {
+	u32	drc_index;
+	u32	zero;
+	u32	name_offset;
+	u32	prop_length;
+	u32	prop_offset;
+};
+
+static void dlpar_free_cc_property(struct property *prop)
+{
+	kfree(prop->name);
+	kfree(prop->value);
+	kfree(prop);
+}
+
+static struct property *dlpar_parse_cc_property(struct cc_workarea *ccwa)
+{
+	struct property *prop;
+	char *name;
+	char *value;
+
+	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+	if (!prop)
+		return NULL;
+
+	name = (char *)ccwa + ccwa->name_offset;
+	prop->name = kstrdup(name, GFP_KERNEL);
+
+	prop->length = ccwa->prop_length;
+	value = (char *)ccwa + ccwa->prop_offset;
+	prop->value = kzalloc(prop->length, GFP_KERNEL);
+	if (!prop->value) {
+		dlpar_free_cc_property(prop);
+		return NULL;
+	}
+
+	memcpy(prop->value, value, prop->length);
+	return prop;
+}
+
+static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa)
+{
+	struct device_node *dn;
+	char *name;
+
+	dn = kzalloc(sizeof(*dn), GFP_KERNEL);
+	if (!dn)
+		return NULL;
+
+	/* The configure connector reported name does not contain a
+	 * preceeding '/', so we allocate a buffer large enough to
+	 * prepend this to the full_name.
+	 */
+	name = (char *)ccwa + ccwa->name_offset;
+	dn->full_name = kmalloc(strlen(name) + 2, GFP_KERNEL);
+	if (!dn->full_name) {
+		kfree(dn);
+		return NULL;
+	}
+
+	sprintf(dn->full_name, "/%s", name);
+	return dn;
+}
+
+static void dlpar_free_one_cc_node(struct device_node *dn)
+{
+	struct property *prop;
+
+	while (dn->properties) {
+		prop = dn->properties;
+		dn->properties = prop->next;
+		dlpar_free_cc_property(prop);
+	}
+
+	kfree(dn->full_name);
+	kfree(dn);
+}
+
+static void dlpar_free_cc_nodes(struct device_node *dn)
+{
+	if (dn->child)
+		dlpar_free_cc_nodes(dn->child);
+
+	if (dn->sibling)
+		dlpar_free_cc_nodes(dn->sibling);
+
+	dlpar_free_one_cc_node(dn);
+}
+
+#define NEXT_SIBLING    1
+#define NEXT_CHILD      2
+#define NEXT_PROPERTY   3
+#define PREV_PARENT     4
+#define MORE_MEMORY     5
+#define CALL_AGAIN	-2
+#define ERR_CFG_USE     -9003
+
+struct device_node *dlpar_configure_connector(u32 drc_index)
+{
+	struct device_node *dn;
+	struct device_node *first_dn = NULL;
+	struct device_node *last_dn = NULL;
+	struct property *property;
+	struct property *last_property = NULL;
+	struct cc_workarea *ccwa;
+	int cc_token;
+	int rc;
+
+	cc_token = rtas_token("ibm,configure-connector");
+	if (cc_token == RTAS_UNKNOWN_SERVICE)
+		return NULL;
+
+	spin_lock(&rtas_data_buf_lock);
+	ccwa = (struct cc_workarea *)&rtas_data_buf[0];
+	ccwa->drc_index = drc_index;
+	ccwa->zero = 0;
+
+	rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL);
+	while (rc) {
+		switch (rc) {
+		case NEXT_SIBLING:
+			dn = dlpar_parse_cc_node(ccwa);
+			if (!dn)
+				goto cc_error;
+
+			dn->parent = last_dn->parent;
+			last_dn->sibling = dn;
+			last_dn = dn;
+			break;
+
+		case NEXT_CHILD:
+			dn = dlpar_parse_cc_node(ccwa);
+			if (!dn)
+				goto cc_error;
+
+			if (!first_dn)
+				first_dn = dn;
+			else {
+				dn->parent = last_dn;
+				if (last_dn)
+					last_dn->child = dn;
+			}
+
+			last_dn = dn;
+			break;
+
+		case NEXT_PROPERTY:
+			property = dlpar_parse_cc_property(ccwa);
+			if (!property)
+				goto cc_error;
+
+			if (!last_dn->properties)
+				last_dn->properties = property;
+			else
+				last_property->next = property;
+
+			last_property = property;
+			break;
+
+		case PREV_PARENT:
+			last_dn = last_dn->parent;
+			break;
+
+		case CALL_AGAIN:
+			break;
+
+		case MORE_MEMORY:
+		case ERR_CFG_USE:
+		default:
+			printk(KERN_ERR "Unexpected Error (%d) "
+			       "returned from configure-connector\n", rc);
+			goto cc_error;
+		}
+
+		rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL);
+	}
+
+	spin_unlock(&rtas_data_buf_lock);
+	return first_dn;
+
+cc_error:
+	if (first_dn)
+		dlpar_free_cc_nodes(first_dn);
+	spin_unlock(&rtas_data_buf_lock);
+	return NULL;
+}
+
+static struct device_node *derive_parent(const char *path)
+{
+	struct device_node *parent;
+	char *last_slash;
+
+	last_slash = strrchr(path, '/');
+	if (last_slash == path) {
+		parent = of_find_node_by_path("/");
+	} else {
+		char *parent_path;
+		int parent_path_len = last_slash - path + 1;
+		parent_path = kmalloc(parent_path_len, GFP_KERNEL);
+		if (!parent_path)
+			return NULL;
+
+		strlcpy(parent_path, path, parent_path_len);
+		parent = of_find_node_by_path(parent_path);
+		kfree(parent_path);
+	}
+
+	return parent;
+}
+
+int dlpar_attach_node(struct device_node *dn)
+{
+	struct proc_dir_entry *ent;
+	int rc;
+
+	of_node_set_flag(dn, OF_DYNAMIC);
+	kref_init(&dn->kref);
+	dn->parent = derive_parent(dn->full_name);
+	if (!dn->parent)
+		return -ENOMEM;
+
+	rc = blocking_notifier_call_chain(&pSeries_reconfig_chain,
+					  PSERIES_RECONFIG_ADD, dn);
+	if (rc == NOTIFY_BAD) {
+		printk(KERN_ERR "Failed to add device node %s\n",
+		       dn->full_name);
+		return -ENOMEM; /* For now, safe to assume kmalloc failure */
+	}
+
+	of_attach_node(dn);
+
+#ifdef CONFIG_PROC_DEVICETREE
+	ent = proc_mkdir(strrchr(dn->full_name, '/') + 1, dn->parent->pde);
+	if (ent)
+		proc_device_tree_add_node(dn, ent);
+#endif
+
+	of_node_put(dn->parent);
+	return 0;
+}
+
+int dlpar_detach_node(struct device_node *dn)
+{
+	struct device_node *parent = dn->parent;
+	struct property *prop = dn->properties;
+
+#ifdef CONFIG_PROC_DEVICETREE
+	while (prop) {
+		remove_proc_entry(prop->name, dn->pde);
+		prop = prop->next;
+	}
+
+	if (dn->pde)
+		remove_proc_entry(dn->pde->name, parent->pde);
+#endif
+
+	blocking_notifier_call_chain(&pSeries_reconfig_chain,
+			    PSERIES_RECONFIG_REMOVE, dn);
+	of_detach_node(dn);
+	of_node_put(dn); /* Must decrement the refcount */
+
+	return 0;
+}
+
+#define DR_ENTITY_SENSE		9003
+#define DR_ENTITY_PRESENT	1
+#define DR_ENTITY_UNUSABLE	2
+#define ALLOCATION_STATE	9003
+#define ALLOC_UNUSABLE		0
+#define ALLOC_USABLE		1
+#define ISOLATION_STATE		9001
+#define ISOLATE			0
+#define UNISOLATE		1
+
+int dlpar_acquire_drc(u32 drc_index)
+{
+	int dr_status, rc;
+
+	rc = rtas_call(rtas_token("get-sensor-state"), 2, 2, &dr_status,
+		       DR_ENTITY_SENSE, drc_index);
+	if (rc || dr_status != DR_ENTITY_UNUSABLE)
+		return -1;
+
+	rc = rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_USABLE);
+	if (rc)
+		return rc;
+
+	rc = rtas_set_indicator(ISOLATION_STATE, drc_index, UNISOLATE);
+	if (rc) {
+		rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_UNUSABLE);
+		return rc;
+	}
+
+	return 0;
+}
+
+int dlpar_release_drc(u32 drc_index)
+{
+	int dr_status, rc;
+
+	rc = rtas_call(rtas_token("get-sensor-state"), 2, 2, &dr_status,
+		       DR_ENTITY_SENSE, drc_index);
+	if (rc || dr_status != DR_ENTITY_PRESENT)
+		return -1;
+
+	rc = rtas_set_indicator(ISOLATION_STATE, drc_index, ISOLATE);
+	if (rc)
+		return rc;
+
+	rc = rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_UNUSABLE);
+	if (rc) {
+		rtas_set_indicator(ISOLATION_STATE, drc_index, UNISOLATE);
+		return rc;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+
+static DEFINE_MUTEX(pseries_cpu_hotplug_mutex);
+
+void cpu_hotplug_driver_lock()
+{
+	mutex_lock(&pseries_cpu_hotplug_mutex);
+}
+
+void cpu_hotplug_driver_unlock()
+{
+	mutex_unlock(&pseries_cpu_hotplug_mutex);
+}
+
+static int dlpar_online_cpu(struct device_node *dn)
+{
+	int rc = 0;
+	unsigned int cpu;
+	int len, nthreads, i;
+	const u32 *intserv;
+
+	intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len);
+	if (!intserv)
+		return -EINVAL;
+
+	nthreads = len / sizeof(u32);
+
+	cpu_maps_update_begin();
+	for (i = 0; i < nthreads; i++) {
+		for_each_present_cpu(cpu) {
+			if (get_hard_smp_processor_id(cpu) != intserv[i])
+				continue;
+			BUG_ON(get_cpu_current_state(cpu)
+					!= CPU_STATE_OFFLINE);
+			cpu_maps_update_done();
+			rc = cpu_up(cpu);
+			if (rc)
+				goto out;
+			cpu_maps_update_begin();
+
+			break;
+		}
+		if (cpu == num_possible_cpus())
+			printk(KERN_WARNING "Could not find cpu to online "
+			       "with physical id 0x%x\n", intserv[i]);
+	}
+	cpu_maps_update_done();
+
+out:
+	return rc;
+
+}
+
+static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
+{
+	struct device_node *dn;
+	unsigned long drc_index;
+	char *cpu_name;
+	int rc;
+
+	cpu_hotplug_driver_lock();
+	rc = strict_strtoul(buf, 0, &drc_index);
+	if (rc) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	dn = dlpar_configure_connector(drc_index);
+	if (!dn) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* configure-connector reports cpus as living in the base
+	 * directory of the device tree.  CPUs actually live in the
+	 * cpus directory so we need to fixup the full_name.
+	 */
+	cpu_name = kzalloc(strlen(dn->full_name) + strlen("/cpus") + 1,
+			   GFP_KERNEL);
+	if (!cpu_name) {
+		dlpar_free_cc_nodes(dn);
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	sprintf(cpu_name, "/cpus%s", dn->full_name);
+	kfree(dn->full_name);
+	dn->full_name = cpu_name;
+
+	rc = dlpar_acquire_drc(drc_index);
+	if (rc) {
+		dlpar_free_cc_nodes(dn);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	rc = dlpar_attach_node(dn);
+	if (rc) {
+		dlpar_release_drc(drc_index);
+		dlpar_free_cc_nodes(dn);
+	}
+
+	rc = dlpar_online_cpu(dn);
+out:
+	cpu_hotplug_driver_unlock();
+
+	return rc ? rc : count;
+}
+
+static int dlpar_offline_cpu(struct device_node *dn)
+{
+	int rc = 0;
+	unsigned int cpu;
+	int len, nthreads, i;
+	const u32 *intserv;
+
+	intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len);
+	if (!intserv)
+		return -EINVAL;
+
+	nthreads = len / sizeof(u32);
+
+	cpu_maps_update_begin();
+	for (i = 0; i < nthreads; i++) {
+		for_each_present_cpu(cpu) {
+			if (get_hard_smp_processor_id(cpu) != intserv[i])
+				continue;
+
+			if (get_cpu_current_state(cpu) == CPU_STATE_OFFLINE)
+				break;
+
+			if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) {
+				cpu_maps_update_done();
+				rc = cpu_down(cpu);
+				if (rc)
+					goto out;
+				cpu_maps_update_begin();
+				break;
+
+			}
+
+			/*
+			 * The cpu is in CPU_STATE_INACTIVE.
+			 * Upgrade it's state to CPU_STATE_OFFLINE.
+			 */
+			set_preferred_offline_state(cpu, CPU_STATE_OFFLINE);
+			BUG_ON(plpar_hcall_norets(H_PROD, intserv[i])
+								!= H_SUCCESS);
+			__cpu_die(cpu);
+			break;
+		}
+		if (cpu == num_possible_cpus())
+			printk(KERN_WARNING "Could not find cpu to offline "
+			       "with physical id 0x%x\n", intserv[i]);
+	}
+	cpu_maps_update_done();
+
+out:
+	return rc;
+
+}
+
+static ssize_t dlpar_cpu_release(const char *buf, size_t count)
+{
+	struct device_node *dn;
+	const u32 *drc_index;
+	int rc;
+
+	dn = of_find_node_by_path(buf);
+	if (!dn)
+		return -EINVAL;
+
+	drc_index = of_get_property(dn, "ibm,my-drc-index", NULL);
+	if (!drc_index) {
+		of_node_put(dn);
+		return -EINVAL;
+	}
+
+	cpu_hotplug_driver_lock();
+	rc = dlpar_offline_cpu(dn);
+	if (rc) {
+		of_node_put(dn);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	rc = dlpar_release_drc(*drc_index);
+	if (rc) {
+		of_node_put(dn);
+		goto out;
+	}
+
+	rc = dlpar_detach_node(dn);
+	if (rc) {
+		dlpar_acquire_drc(*drc_index);
+		goto out;
+	}
+
+	of_node_put(dn);
+out:
+	cpu_hotplug_driver_unlock();
+	return rc ? rc : count;
+}
+
+static int __init pseries_dlpar_init(void)
+{
+	ppc_md.cpu_probe = dlpar_cpu_probe;
+	ppc_md.cpu_release = dlpar_cpu_release;
+
+	return 0;
+}
+machine_device_initcall(pseries, pseries_dlpar_init);
+
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 0e8db6771252..ef8e45448480 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -63,22 +63,6 @@ static void print_device_node_tree(struct pci_dn *pdn, int dent)
 }
 #endif
 
-/** 
- * irq_in_use - return true if this irq is being used 
- */
-static int irq_in_use(unsigned int irq)
-{
-	int rc = 0;
-	unsigned long flags;
-   struct irq_desc *desc = irq_desc + irq;
-
-	spin_lock_irqsave(&desc->lock, flags);
-	if (desc->action)
-		rc = 1;
-	spin_unlock_irqrestore(&desc->lock, flags);
-	return rc;
-}
-
 /**
  * eeh_disable_irq - disable interrupt for the recovering device
  */
@@ -93,7 +77,7 @@ static void eeh_disable_irq(struct pci_dev *dev)
 	if (dev->msi_enabled || dev->msix_enabled)
 		return;
 
-	if (!irq_in_use(dev->irq))
+	if (!irq_has_action(dev->irq))
 		return;
 
 	PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index ebff6d9a4e39..6ea4698d9176 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -30,6 +30,7 @@
 #include <asm/pSeries_reconfig.h>
 #include "xics.h"
 #include "plpar_wrappers.h"
+#include "offline_states.h"
 
 /* This version can't take the spinlock, because it never returns */
 static struct rtas_args rtas_stop_self_args = {
@@ -39,6 +40,55 @@ static struct rtas_args rtas_stop_self_args = {
 	.rets = &rtas_stop_self_args.args[0],
 };
 
+static DEFINE_PER_CPU(enum cpu_state_vals, preferred_offline_state) =
+							CPU_STATE_OFFLINE;
+static DEFINE_PER_CPU(enum cpu_state_vals, current_state) = CPU_STATE_OFFLINE;
+
+static enum cpu_state_vals default_offline_state = CPU_STATE_OFFLINE;
+
+static int cede_offline_enabled __read_mostly = 1;
+
+/*
+ * Enable/disable cede_offline when available.
+ */
+static int __init setup_cede_offline(char *str)
+{
+	if (!strcmp(str, "off"))
+		cede_offline_enabled = 0;
+	else if (!strcmp(str, "on"))
+		cede_offline_enabled = 1;
+	else
+		return 0;
+	return 1;
+}
+
+__setup("cede_offline=", setup_cede_offline);
+
+enum cpu_state_vals get_cpu_current_state(int cpu)
+{
+	return per_cpu(current_state, cpu);
+}
+
+void set_cpu_current_state(int cpu, enum cpu_state_vals state)
+{
+	per_cpu(current_state, cpu) = state;
+}
+
+enum cpu_state_vals get_preferred_offline_state(int cpu)
+{
+	return per_cpu(preferred_offline_state, cpu);
+}
+
+void set_preferred_offline_state(int cpu, enum cpu_state_vals state)
+{
+	per_cpu(preferred_offline_state, cpu) = state;
+}
+
+void set_default_offline_state(int cpu)
+{
+	per_cpu(preferred_offline_state, cpu) = default_offline_state;
+}
+
 static void rtas_stop_self(void)
 {
 	struct rtas_args *args = &rtas_stop_self_args;
@@ -56,11 +106,61 @@ static void rtas_stop_self(void)
 
 static void pseries_mach_cpu_die(void)
 {
+	unsigned int cpu = smp_processor_id();
+	unsigned int hwcpu = hard_smp_processor_id();
+	u8 cede_latency_hint = 0;
+
 	local_irq_disable();
 	idle_task_exit();
 	xics_teardown_cpu();
-	unregister_slb_shadow(hard_smp_processor_id(), __pa(get_slb_shadow()));
-	rtas_stop_self();
+
+	if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
+		set_cpu_current_state(cpu, CPU_STATE_INACTIVE);
+		cede_latency_hint = 2;
+
+		get_lppaca()->idle = 1;
+		if (!get_lppaca()->shared_proc)
+			get_lppaca()->donate_dedicated_cpu = 1;
+
+		printk(KERN_INFO
+			"cpu %u (hwid %u) ceding for offline with hint %d\n",
+			cpu, hwcpu, cede_latency_hint);
+		while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
+			extended_cede_processor(cede_latency_hint);
+			printk(KERN_INFO "cpu %u (hwid %u) returned from cede.\n",
+				cpu, hwcpu);
+			printk(KERN_INFO
+			"Decrementer value = %x Timebase value = %llx\n",
+			get_dec(), get_tb());
+		}
+
+		printk(KERN_INFO "cpu %u (hwid %u) got prodded to go online\n",
+			cpu, hwcpu);
+
+		if (!get_lppaca()->shared_proc)
+			get_lppaca()->donate_dedicated_cpu = 0;
+		get_lppaca()->idle = 0;
+	}
+
+	if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) {
+		unregister_slb_shadow(hwcpu, __pa(get_slb_shadow()));
+
+		/*
+		 * NOTE: Calling start_secondary() here for now to
+		 * start new context.
+		 * However, need to do it cleanly by resetting the
+		 * stack pointer.
+		 */
+		start_secondary();
+
+	} else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) {
+
+		set_cpu_current_state(cpu, CPU_STATE_OFFLINE);
+		unregister_slb_shadow(hard_smp_processor_id(),
+					__pa(get_slb_shadow()));
+		rtas_stop_self();
+	}
+
 	/* Should never get here... */
 	BUG();
 	for(;;);
@@ -106,18 +206,43 @@ static int pseries_cpu_disable(void)
 	return 0;
 }
 
+/*
+ * pseries_cpu_die: Wait for the cpu to die.
+ * @cpu: logical processor id of the CPU whose death we're awaiting.
+ *
+ * This function is called from the context of the thread which is performing
+ * the cpu-offline. Here we wait for long enough to allow the cpu in question
+ * to self-destroy so that the cpu-offline thread can send the CPU_DEAD
+ * notifications.
+ *
+ * OTOH, pseries_mach_cpu_die() is called by the @cpu when it wants to
+ * self-destruct.
+ */
 static void pseries_cpu_die(unsigned int cpu)
 {
 	int tries;
-	int cpu_status;
+	int cpu_status = 1;
 	unsigned int pcpu = get_hard_smp_processor_id(cpu);
 
-	for (tries = 0; tries < 25; tries++) {
-		cpu_status = query_cpu_stopped(pcpu);
-		if (cpu_status == 0 || cpu_status == -1)
-			break;
-		cpu_relax();
+	if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
+		cpu_status = 1;
+		for (tries = 0; tries < 1000; tries++) {
+			if (get_cpu_current_state(cpu) == CPU_STATE_INACTIVE) {
+				cpu_status = 0;
+				break;
+			}
+			cpu_relax();
+		}
+	} else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) {
+
+		for (tries = 0; tries < 25; tries++) {
+			cpu_status = query_cpu_stopped(pcpu);
+			if (cpu_status == 0 || cpu_status == -1)
+				break;
+			cpu_relax();
+		}
 	}
+
 	if (cpu_status != 0) {
 		printk("Querying DEAD? cpu %i (%i) shows %i\n",
 		       cpu, pcpu, cpu_status);
@@ -252,10 +377,41 @@ static struct notifier_block pseries_smp_nb = {
 	.notifier_call = pseries_smp_notifier,
 };
 
+#define MAX_CEDE_LATENCY_LEVELS		4
+#define	CEDE_LATENCY_PARAM_LENGTH	10
+#define CEDE_LATENCY_PARAM_MAX_LENGTH	\
+	(MAX_CEDE_LATENCY_LEVELS * CEDE_LATENCY_PARAM_LENGTH * sizeof(char))
+#define CEDE_LATENCY_TOKEN		45
+
+static char cede_parameters[CEDE_LATENCY_PARAM_MAX_LENGTH];
+
+static int parse_cede_parameters(void)
+{
+	int call_status;
+
+	memset(cede_parameters, 0, CEDE_LATENCY_PARAM_MAX_LENGTH);
+	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+				NULL,
+				CEDE_LATENCY_TOKEN,
+				__pa(cede_parameters),
+				CEDE_LATENCY_PARAM_MAX_LENGTH);
+
+	if (call_status != 0)
+		printk(KERN_INFO "CEDE_LATENCY: \
+			%s %s Error calling get-system-parameter(0x%x)\n",
+			__FILE__, __func__, call_status);
+	else
+		printk(KERN_INFO "CEDE_LATENCY: \
+			get-system-parameter successful.\n");
+
+	return call_status;
+}
+
 static int __init pseries_cpu_hotplug_init(void)
 {
 	struct device_node *np;
 	const char *typep;
+	int cpu;
 
 	for_each_node_by_name(np, "interrupt-controller") {
 		typep = of_get_property(np, "compatible", NULL);
@@ -283,8 +439,16 @@ static int __init pseries_cpu_hotplug_init(void)
 	smp_ops->cpu_die = pseries_cpu_die;
 
 	/* Processors can be added/removed only on LPAR */
-	if (firmware_has_feature(FW_FEATURE_LPAR))
+	if (firmware_has_feature(FW_FEATURE_LPAR)) {
 		pSeries_reconfig_notifier_register(&pseries_smp_nb);
+		cpu_maps_update_begin();
+		if (cede_offline_enabled && parse_cede_parameters() == 0) {
+			default_offline_state = CPU_STATE_INACTIVE;
+			for_each_online_cpu(cpu)
+				set_default_offline_state(cpu);
+		}
+		cpu_maps_update_done();
+	}
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index c1427b3634ec..383a5d0e9818 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -14,68 +14,94 @@
 	
 #define STK_PARM(i)     (48 + ((i)-3)*8)
 
-#ifdef CONFIG_HCALL_STATS
+#ifdef CONFIG_TRACEPOINTS
+
+	.section	".toc","aw"
+
+	.globl hcall_tracepoint_refcount
+hcall_tracepoint_refcount:
+	.llong	0
+
+	.section	".text"
+
 /*
  * precall must preserve all registers.  use unused STK_PARM()
- * areas to save snapshots and opcode.
+ * areas to save snapshots and opcode. We branch around this
+ * in early init (eg when populating the MMU hashtable) by using an
+ * unconditional cpu feature.
  */
-#define HCALL_INST_PRECALL					\
-	std	r3,STK_PARM(r3)(r1);	/* save opcode */	\
-	mftb	r0;			/* get timebase and */	\
-	std     r0,STK_PARM(r5)(r1);	/* save for later */	\
+#define HCALL_INST_PRECALL(FIRST_REG)				\
 BEGIN_FTR_SECTION;						\
-	mfspr	r0,SPRN_PURR;		/* get PURR and */	\
-	std	r0,STK_PARM(r6)(r1);	/* save for later */	\
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);
-	
+	b	1f;						\
+END_FTR_SECTION(0, 1);						\
+	ld      r12,hcall_tracepoint_refcount@toc(r2);		\
+	cmpdi	r12,0;						\
+	beq+	1f;						\
+	mflr	r0;						\
+	std	r3,STK_PARM(r3)(r1);				\
+	std	r4,STK_PARM(r4)(r1);				\
+	std	r5,STK_PARM(r5)(r1);				\
+	std	r6,STK_PARM(r6)(r1);				\
+	std	r7,STK_PARM(r7)(r1);				\
+	std	r8,STK_PARM(r8)(r1);				\
+	std	r9,STK_PARM(r9)(r1);				\
+	std	r10,STK_PARM(r10)(r1);				\
+	std	r0,16(r1);					\
+	addi	r4,r1,STK_PARM(FIRST_REG);			\
+	stdu	r1,-STACK_FRAME_OVERHEAD(r1);			\
+	bl	.__trace_hcall_entry;				\
+	addi	r1,r1,STACK_FRAME_OVERHEAD;			\
+	ld	r0,16(r1);					\
+	ld	r3,STK_PARM(r3)(r1);				\
+	ld	r4,STK_PARM(r4)(r1);				\
+	ld	r5,STK_PARM(r5)(r1);				\
+	ld	r6,STK_PARM(r6)(r1);				\
+	ld	r7,STK_PARM(r7)(r1);				\
+	ld	r8,STK_PARM(r8)(r1);				\
+	ld	r9,STK_PARM(r9)(r1);				\
+	ld	r10,STK_PARM(r10)(r1);				\
+	mtlr	r0;						\
+1:
+
 /*
  * postcall is performed immediately before function return which
  * allows liberal use of volatile registers.  We branch around this
  * in early init (eg when populating the MMU hashtable) by using an
  * unconditional cpu feature.
  */
-#define HCALL_INST_POSTCALL					\
+#define __HCALL_INST_POSTCALL					\
 BEGIN_FTR_SECTION;						\
 	b	1f;						\
 END_FTR_SECTION(0, 1);						\
-	ld	r4,STK_PARM(r3)(r1);	/* validate opcode */	\
-	cmpldi	cr7,r4,MAX_HCALL_OPCODE;			\
-	bgt-	cr7,1f;						\
-								\
-	/* get time and PURR snapshots after hcall */		\
-	mftb	r7;			/* timebase after */	\
-BEGIN_FTR_SECTION;						\
-	mfspr	r8,SPRN_PURR;		/* PURR after */	\
-	ld	r6,STK_PARM(r6)(r1);	/* PURR before */	\
-	subf	r6,r6,r8;		/* delta */		\
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);				\
-	ld	r5,STK_PARM(r5)(r1);	/* timebase before */	\
-	subf	r5,r5,r7;		/* time delta */	\
-								\
-	/* calculate address of stat structure r4 = opcode */	\
-	srdi	r4,r4,2;		/* index into array */	\
-	mulli	r4,r4,HCALL_STAT_SIZE;				\
-	LOAD_REG_ADDR(r7, per_cpu__hcall_stats);		\
-	add	r4,r4,r7;					\
-	ld	r7,PACA_DATA_OFFSET(r13); /* per cpu offset */	\
-	add	r4,r4,r7;					\
-								\
-	/* update stats	*/					\
-	ld	r7,HCALL_STAT_CALLS(r4); /* count */		\
-	addi	r7,r7,1;					\
-	std	r7,HCALL_STAT_CALLS(r4);			\
-	ld      r7,HCALL_STAT_TB(r4);	/* timebase */		\
-	add	r7,r7,r5;					\
-	std	r7,HCALL_STAT_TB(r4);				\
-BEGIN_FTR_SECTION;						\
-	ld	r7,HCALL_STAT_PURR(r4);	/* PURR */		\
-	add	r7,r7,r6;					\
-	std	r7,HCALL_STAT_PURR(r4);				\
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);				\
+	ld      r12,hcall_tracepoint_refcount@toc(r2);		\
+	cmpdi	r12,0;						\
+	beq+	1f;						\
+	mflr	r0;						\
+	ld	r6,STK_PARM(r3)(r1);				\
+	std	r3,STK_PARM(r3)(r1);				\
+	mr	r4,r3;						\
+	mr	r3,r6;						\
+	std	r0,16(r1);					\
+	stdu	r1,-STACK_FRAME_OVERHEAD(r1);			\
+	bl	.__trace_hcall_exit;				\
+	addi	r1,r1,STACK_FRAME_OVERHEAD;			\
+	ld	r0,16(r1);					\
+	ld	r3,STK_PARM(r3)(r1);				\
+	mtlr	r0;						\
 1:
+
+#define HCALL_INST_POSTCALL_NORETS				\
+	li	r5,0;						\
+	__HCALL_INST_POSTCALL
+
+#define HCALL_INST_POSTCALL(BUFREG)				\
+	mr	r5,BUFREG;					\
+	__HCALL_INST_POSTCALL
+
 #else
-#define HCALL_INST_PRECALL
-#define HCALL_INST_POSTCALL
+#define HCALL_INST_PRECALL(FIRST_ARG)
+#define HCALL_INST_POSTCALL_NORETS
+#define HCALL_INST_POSTCALL(BUFREG)
 #endif
 
 	.text
@@ -86,11 +112,11 @@ _GLOBAL(plpar_hcall_norets)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL
+	HCALL_INST_PRECALL(r4)
 
 	HVSC				/* invoke the hypervisor */
 
-	HCALL_INST_POSTCALL
+	HCALL_INST_POSTCALL_NORETS
 
 	lwz	r0,8(r1)
 	mtcrf	0xff,r0
@@ -102,7 +128,7 @@ _GLOBAL(plpar_hcall)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL
+	HCALL_INST_PRECALL(r5)
 
 	std     r4,STK_PARM(r4)(r1)     /* Save ret buffer */
 
@@ -121,7 +147,7 @@ _GLOBAL(plpar_hcall)
 	std	r6, 16(r12)
 	std	r7, 24(r12)
 
-	HCALL_INST_POSTCALL
+	HCALL_INST_POSTCALL(r12)
 
 	lwz	r0,8(r1)
 	mtcrf	0xff,r0
@@ -168,7 +194,7 @@ _GLOBAL(plpar_hcall9)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL
+	HCALL_INST_PRECALL(r5)
 
 	std     r4,STK_PARM(r4)(r1)     /* Save ret buffer */
 
@@ -196,7 +222,7 @@ _GLOBAL(plpar_hcall9)
 	std	r11,56(r12)
 	std	r0, 64(r12)
 
-	HCALL_INST_POSTCALL
+	HCALL_INST_POSTCALL(r12)
 
 	lwz	r0,8(r1)
 	mtcrf	0xff,r0
diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c
index 3631a4f277eb..2f58c71b7259 100644
--- a/arch/powerpc/platforms/pseries/hvCall_inst.c
+++ b/arch/powerpc/platforms/pseries/hvCall_inst.c
@@ -26,6 +26,7 @@
 #include <asm/hvcall.h>
 #include <asm/firmware.h>
 #include <asm/cputable.h>
+#include <asm/trace.h>
 
 DEFINE_PER_CPU(struct hcall_stats[HCALL_STAT_ARRAY_SIZE], hcall_stats);
 
@@ -100,6 +101,35 @@ static const struct file_operations hcall_inst_seq_fops = {
 #define	HCALL_ROOT_DIR		"hcall_inst"
 #define CPU_NAME_BUF_SIZE	32
 
+
+static void probe_hcall_entry(unsigned long opcode, unsigned long *args)
+{
+	struct hcall_stats *h;
+
+	if (opcode > MAX_HCALL_OPCODE)
+		return;
+
+	h = &get_cpu_var(hcall_stats)[opcode / 4];
+	h->tb_start = mftb();
+	h->purr_start = mfspr(SPRN_PURR);
+}
+
+static void probe_hcall_exit(unsigned long opcode, unsigned long retval,
+			     unsigned long *retbuf)
+{
+	struct hcall_stats *h;
+
+	if (opcode > MAX_HCALL_OPCODE)
+		return;
+
+	h = &__get_cpu_var(hcall_stats)[opcode / 4];
+	h->num_calls++;
+	h->tb_total = mftb() - h->tb_start;
+	h->purr_total = mfspr(SPRN_PURR) - h->purr_start;
+
+	put_cpu_var(hcall_stats);
+}
+
 static int __init hcall_inst_init(void)
 {
 	struct dentry *hcall_root;
@@ -110,6 +140,14 @@ static int __init hcall_inst_init(void)
 	if (!firmware_has_feature(FW_FEATURE_LPAR))
 		return 0;
 
+	if (register_trace_hcall_entry(probe_hcall_entry))
+		return -EINVAL;
+
+	if (register_trace_hcall_exit(probe_hcall_exit)) {
+		unregister_trace_hcall_entry(probe_hcall_entry);
+		return -EINVAL;
+	}
+
 	hcall_root = debugfs_create_dir(HCALL_ROOT_DIR, NULL);
 	if (!hcall_root)
 		return -ENOMEM;
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 903eb9eec687..0707653612ba 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -39,6 +39,7 @@
 #include <asm/cputable.h>
 #include <asm/udbg.h>
 #include <asm/smp.h>
+#include <asm/trace.h>
 
 #include "plpar_wrappers.h"
 #include "pseries.h"
@@ -661,3 +662,35 @@ void arch_free_page(struct page *page, int order)
 EXPORT_SYMBOL(arch_free_page);
 
 #endif
+
+#ifdef CONFIG_TRACEPOINTS
+/*
+ * We optimise our hcall path by placing hcall_tracepoint_refcount
+ * directly in the TOC so we can check if the hcall tracepoints are
+ * enabled via a single load.
+ */
+
+/* NB: reg/unreg are called while guarded with the tracepoints_mutex */
+extern long hcall_tracepoint_refcount;
+
+void hcall_tracepoint_regfunc(void)
+{
+	hcall_tracepoint_refcount++;
+}
+
+void hcall_tracepoint_unregfunc(void)
+{
+	hcall_tracepoint_refcount--;
+}
+
+void __trace_hcall_entry(unsigned long opcode, unsigned long *args)
+{
+	trace_hcall_entry(opcode, args);
+}
+
+void __trace_hcall_exit(long opcode, unsigned long retval,
+			unsigned long *retbuf)
+{
+	trace_hcall_exit(opcode, retval, retbuf);
+}
+#endif
diff --git a/arch/powerpc/platforms/pseries/offline_states.h b/arch/powerpc/platforms/pseries/offline_states.h
new file mode 100644
index 000000000000..22574e0d9d91
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/offline_states.h
@@ -0,0 +1,18 @@
+#ifndef _OFFLINE_STATES_H_
+#define _OFFLINE_STATES_H_
+
+/* Cpu offline states go here */
+enum cpu_state_vals {
+	CPU_STATE_OFFLINE,
+	CPU_STATE_INACTIVE,
+	CPU_STATE_ONLINE,
+	CPU_MAX_OFFLINE_STATES
+};
+
+extern enum cpu_state_vals get_cpu_current_state(int cpu);
+extern void set_cpu_current_state(int cpu, enum cpu_state_vals state);
+extern enum cpu_state_vals get_preferred_offline_state(int cpu);
+extern void set_preferred_offline_state(int cpu, enum cpu_state_vals state);
+extern void set_default_offline_state(int cpu);
+extern int start_secondary(void);
+#endif
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index a24a6b2333b2..0603c91538ae 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -9,11 +9,33 @@ static inline long poll_pending(void)
 	return plpar_hcall_norets(H_POLL_PENDING);
 }
 
+static inline u8 get_cede_latency_hint(void)
+{
+	return get_lppaca()->gpr5_dword.fields.cede_latency_hint;
+}
+
+static inline void set_cede_latency_hint(u8 latency_hint)
+{
+	get_lppaca()->gpr5_dword.fields.cede_latency_hint = latency_hint;
+}
+
 static inline long cede_processor(void)
 {
 	return plpar_hcall_norets(H_CEDE);
 }
 
+static inline long extended_cede_processor(unsigned long latency_hint)
+{
+	long rc;
+	u8 old_latency_hint = get_cede_latency_hint();
+
+	set_cede_latency_hint(latency_hint);
+	rc = cede_processor();
+	set_cede_latency_hint(old_latency_hint);
+
+	return rc;
+}
+
 static inline long vpa_call(unsigned long flags, unsigned long cpu,
 		unsigned long vpa)
 {
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 2e2bbe120b90..a2305d29bbbd 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -96,7 +96,7 @@ static struct device_node *derive_parent(const char *path)
 	return parent;
 }
 
-static BLOCKING_NOTIFIER_HEAD(pSeries_reconfig_chain);
+BLOCKING_NOTIFIER_HEAD(pSeries_reconfig_chain);
 
 int pSeries_reconfig_notifier_register(struct notifier_block *nb)
 {
@@ -184,7 +184,7 @@ static int pSeries_reconfig_remove_node(struct device_node *np)
 }
 
 /*
- * /proc/ppc64/ofdt - yucky binary interface for adding and removing
+ * /proc/powerpc/ofdt - yucky binary interface for adding and removing
  * OF device nodes.  Should be deprecated as soon as we get an
  * in-kernel wrapper for the RTAS ibm,configure-connector call.
  */
@@ -543,7 +543,7 @@ static const struct file_operations ofdt_fops = {
 	.write = ofdt_write
 };
 
-/* create /proc/ppc64/ofdt write-only by root */
+/* create /proc/powerpc/ofdt write-only by root */
 static int proc_ppc64_create_ofdt(void)
 {
 	struct proc_dir_entry *ent;
@@ -551,7 +551,7 @@ static int proc_ppc64_create_ofdt(void)
 	if (!machine_is(pseries))
 		return 0;
 
-	ent = proc_create("ppc64/ofdt", S_IWUSR, NULL, &ofdt_fops);
+	ent = proc_create("powerpc/ofdt", S_IWUSR, NULL, &ofdt_fops);
 	if (ent)
 		ent->size = 0;
 
diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c
index 417eca79df69..1b45c458f952 100644
--- a/arch/powerpc/platforms/pseries/scanlog.c
+++ b/arch/powerpc/platforms/pseries/scanlog.c
@@ -13,7 +13,7 @@
  * of this data using this driver.  A dump exists if the device-tree
  * /chosen/ibm,scan-log-data property exists.
  *
- * This driver exports /proc/ppc64/scan-log-dump which can be read.
+ * This driver exports /proc/powerpc/scan-log-dump which can be read.
  * The driver supports only sequential reads.
  *
  * The driver looks at a write to the driver for the single word "reset".
@@ -186,7 +186,7 @@ static int __init scanlog_init(void)
 	if (!data)
 		goto err;
 
-	ent = proc_create_data("ppc64/rtas/scan-log-dump", S_IRUSR, NULL,
+	ent = proc_create_data("powerpc/rtas/scan-log-dump", S_IRUSR, NULL,
 			       &scanlog_fops, data);
 	if (!ent)
 		goto err;
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 440000cc7130..8868c012268a 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -48,6 +48,7 @@
 #include "plpar_wrappers.h"
 #include "pseries.h"
 #include "xics.h"
+#include "offline_states.h"
 
 
 /*
@@ -84,6 +85,9 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu)
 	/* Fixup atomic count: it exited inside IRQ handler. */
 	task_thread_info(paca[lcpu].__current)->preempt_count	= 0;
 
+	if (get_cpu_current_state(lcpu) == CPU_STATE_INACTIVE)
+		goto out;
+
 	/* 
 	 * If the RTAS start-cpu token does not exist then presume the
 	 * cpu is already spinning.
@@ -98,6 +102,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu)
 		return 0;
 	}
 
+out:
 	return 1;
 }
 
@@ -111,12 +116,16 @@ static void __devinit smp_xics_setup_cpu(int cpu)
 		vpa_init(cpu);
 
 	cpu_clear(cpu, of_spin_map);
+	set_cpu_current_state(cpu, CPU_STATE_ONLINE);
+	set_default_offline_state(cpu);
 
 }
 #endif /* CONFIG_XICS */
 
 static void __devinit smp_pSeries_kick_cpu(int nr)
 {
+	long rc;
+	unsigned long hcpuid;
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
 
 	if (!smp_startup_cpu(nr))
@@ -128,6 +137,16 @@ static void __devinit smp_pSeries_kick_cpu(int nr)
 	 * the processor will continue on to secondary_start
 	 */
 	paca[nr].cpu_start = 1;
+
+	set_preferred_offline_state(nr, CPU_STATE_ONLINE);
+
+	if (get_cpu_current_state(nr) == CPU_STATE_INACTIVE) {
+		hcpuid = get_hard_smp_processor_id(nr);
+		rc = plpar_hcall_norets(H_PROD, hcpuid);
+		if (rc != H_SUCCESS)
+			panic("Error: Prod to wake up processor %d Ret= %ld\n",
+				nr, rc);
+	}
 }
 
 static int smp_pSeries_cpu_bootable(unsigned int nr)
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index b9bf0eedccf2..7d01b58f3989 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -20,6 +20,7 @@
 #include <linux/cpu.h>
 #include <linux/msi.h>
 #include <linux/of.h>
+#include <linux/percpu.h>
 
 #include <asm/firmware.h>
 #include <asm/io.h>
@@ -46,6 +47,12 @@ static struct irq_host *xics_host;
  */
 #define IPI_PRIORITY		4
 
+/* The least favored priority */
+#define LOWEST_PRIORITY		0xFF
+
+/* The number of priorities defined above */
+#define MAX_NUM_PRIORITIES	3
+
 static unsigned int default_server = 0xFF;
 static unsigned int default_distrib_server = 0;
 static unsigned int interrupt_server_size = 8;
@@ -56,6 +63,12 @@ static int ibm_set_xive;
 static int ibm_int_on;
 static int ibm_int_off;
 
+struct xics_cppr {
+	unsigned char stack[MAX_NUM_PRIORITIES];
+	int index;
+};
+
+static DEFINE_PER_CPU(struct xics_cppr, xics_cppr);
 
 /* Direct hardware low level accessors */
 
@@ -157,7 +170,7 @@ static int get_irq_server(unsigned int virq, unsigned int strict_check)
 	cpumask_t cpumask;
 	cpumask_t tmp = CPU_MASK_NONE;
 
-	cpumask_copy(&cpumask, irq_desc[virq].affinity);
+	cpumask_copy(&cpumask, irq_to_desc(virq)->affinity);
 	if (!distribute_irqs)
 		return default_server;
 
@@ -284,6 +297,19 @@ static inline unsigned int xics_xirr_vector(unsigned int xirr)
 	return xirr & 0x00ffffff;
 }
 
+static void push_cppr(unsigned int vec)
+{
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+	if (WARN_ON(os_cppr->index >= MAX_NUM_PRIORITIES - 1))
+		return;
+
+	if (vec == XICS_IPI)
+		os_cppr->stack[++os_cppr->index] = IPI_PRIORITY;
+	else
+		os_cppr->stack[++os_cppr->index] = DEFAULT_PRIORITY;
+}
+
 static unsigned int xics_get_irq_direct(void)
 {
 	unsigned int xirr = direct_xirr_info_get();
@@ -294,8 +320,10 @@ static unsigned int xics_get_irq_direct(void)
 		return NO_IRQ;
 
 	irq = irq_radix_revmap_lookup(xics_host, vec);
-	if (likely(irq != NO_IRQ))
+	if (likely(irq != NO_IRQ)) {
+		push_cppr(vec);
 		return irq;
+	}
 
 	/* We don't have a linux mapping, so have rtas mask it. */
 	xics_mask_unknown_vec(vec);
@@ -315,8 +343,10 @@ static unsigned int xics_get_irq_lpar(void)
 		return NO_IRQ;
 
 	irq = irq_radix_revmap_lookup(xics_host, vec);
-	if (likely(irq != NO_IRQ))
+	if (likely(irq != NO_IRQ)) {
+		push_cppr(vec);
 		return irq;
+	}
 
 	/* We don't have a linux mapping, so have RTAS mask it. */
 	xics_mask_unknown_vec(vec);
@@ -326,12 +356,22 @@ static unsigned int xics_get_irq_lpar(void)
 	return NO_IRQ;
 }
 
+static unsigned char pop_cppr(void)
+{
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+	if (WARN_ON(os_cppr->index < 1))
+		return LOWEST_PRIORITY;
+
+	return os_cppr->stack[--os_cppr->index];
+}
+
 static void xics_eoi_direct(unsigned int virq)
 {
 	unsigned int irq = (unsigned int)irq_map[virq].hwirq;
 
 	iosync();
-	direct_xirr_info_set((0xff << 24) | irq);
+	direct_xirr_info_set((pop_cppr() << 24) | irq);
 }
 
 static void xics_eoi_lpar(unsigned int virq)
@@ -339,7 +379,7 @@ static void xics_eoi_lpar(unsigned int virq)
 	unsigned int irq = (unsigned int)irq_map[virq].hwirq;
 
 	iosync();
-	lpar_xirr_info_set((0xff << 24) | irq);
+	lpar_xirr_info_set((pop_cppr() << 24) | irq);
 }
 
 static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
@@ -388,7 +428,7 @@ static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
 }
 
 static struct irq_chip xics_pic_direct = {
-	.typename = " XICS     ",
+	.name = " XICS     ",
 	.startup = xics_startup,
 	.mask = xics_mask_irq,
 	.unmask = xics_unmask_irq,
@@ -397,7 +437,7 @@ static struct irq_chip xics_pic_direct = {
 };
 
 static struct irq_chip xics_pic_lpar = {
-	.typename = " XICS     ",
+	.name = " XICS     ",
 	.startup = xics_startup,
 	.mask = xics_mask_irq,
 	.unmask = xics_unmask_irq,
@@ -428,13 +468,13 @@ static int xics_host_map(struct irq_host *h, unsigned int virq,
 	/* Insert the interrupt mapping into the radix tree for fast lookup */
 	irq_radix_revmap_insert(xics_host, virq, hw);
 
-	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	irq_to_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq);
 	return 0;
 }
 
 static int xics_host_xlate(struct irq_host *h, struct device_node *ct,
-			   u32 *intspec, unsigned int intsize,
+			   const u32 *intspec, unsigned int intsize,
 			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 
 {
@@ -746,6 +786,12 @@ void __init xics_init_IRQ(void)
 
 static void xics_set_cpu_priority(unsigned char cppr)
 {
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+
+	BUG_ON(os_cppr->index != 0);
+
+	os_cppr->stack[os_cppr->index] = cppr;
+
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		lpar_cppr_info(cppr);
 	else
@@ -772,7 +818,7 @@ static void xics_set_cpu_giq(unsigned int gserver, unsigned int join)
 
 void xics_setup_cpu(void)
 {
-	xics_set_cpu_priority(0xff);
+	xics_set_cpu_priority(LOWEST_PRIORITY);
 
 	xics_set_cpu_giq(default_distrib_server, 1);
 }
@@ -852,7 +898,7 @@ void xics_migrate_irqs_away(void)
 		/* We need to get IPIs still. */
 		if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
 			continue;
-		desc = get_irq_desc(virq);
+		desc = irq_to_desc(virq);
 
 		/* We only need to migrate enabled IRQS */
 		if (desc == NULL || desc->chip == NULL
@@ -881,7 +927,7 @@ void xics_migrate_irqs_away(void)
 		       virq, cpu);
 
 		/* Reset affinity to all cpus */
-		cpumask_setall(irq_desc[virq].affinity);
+		cpumask_setall(irq_to_desc(virq)->affinity);
 		desc->chip->set_affinity(virq, cpu_all_mask);
 unlock:
 		spin_unlock_irqrestore(&desc->lock, flags);
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 9d4b17462f13..5642924fb9fb 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
 obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
+obj-$(CONFIG_FSL_PMC)		+= fsl_pmc.o
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
 obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
 obj-$(CONFIG_MPC8xxx_GPIO)	+= mpc8xxx_gpio.o
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 82424cd7e128..a4b41dbde128 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -77,7 +77,7 @@ static void cpm_end_irq(unsigned int irq)
 }
 
 static struct irq_chip cpm_pic = {
-	.typename = " CPM PIC ",
+	.name = " CPM PIC ",
 	.mask = cpm_mask_irq,
 	.unmask = cpm_unmask_irq,
 	.eoi = cpm_end_irq,
@@ -102,7 +102,7 @@ static int cpm_pic_host_map(struct irq_host *h, unsigned int virq,
 {
 	pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw);
 
-	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	irq_to_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq);
 	return 0;
 }
diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
index 78f1f7cca0a0..971483f0dfac 100644
--- a/arch/powerpc/sysdev/cpm2_pic.c
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -115,11 +115,13 @@ static void cpm2_ack(unsigned int virq)
 
 static void cpm2_end_irq(unsigned int virq)
 {
+	struct irq_desc *desc;
 	int	bit, word;
 	unsigned int irq_nr = virq_to_hw(virq);
 
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-			&& irq_desc[irq_nr].action) {
+	desc = irq_to_desc(irq_nr);
+	if (!(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS))
+			&& desc->action) {
 
 		bit = irq_to_siubit[irq_nr];
 		word = irq_to_siureg[irq_nr];
@@ -138,7 +140,7 @@ static void cpm2_end_irq(unsigned int virq)
 static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
 {
 	unsigned int src = virq_to_hw(virq);
-	struct irq_desc *desc = get_irq_desc(virq);
+	struct irq_desc *desc = irq_to_desc(virq);
 	unsigned int vold, vnew, edibit;
 
 	if (flow_type == IRQ_TYPE_NONE)
@@ -182,7 +184,7 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
 }
 
 static struct irq_chip cpm2_pic = {
-	.typename = " CPM2 SIU ",
+	.name = " CPM2 SIU ",
 	.mask = cpm2_mask_irq,
 	.unmask = cpm2_unmask_irq,
 	.ack = cpm2_ack,
@@ -210,13 +212,13 @@ static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq,
 {
 	pr_debug("cpm2_pic_host_map(%d, 0x%lx)\n", virq, hw);
 
-	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	irq_to_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_and_handler(virq, &cpm2_pic, handle_level_irq);
 	return 0;
 }
 
 static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct,
-			    u32 *intspec, unsigned int intsize,
+			    const u32 *intspec, unsigned int intsize,
 			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 {
 	*out_hwirq = intspec[0];
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index e4b6d66d93de..9de72c96e6d1 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -72,7 +72,7 @@ static phys_addr_t muram_pbase;
 /* Max address size we deal with */
 #define OF_MAX_ADDR_CELLS	4
 
-int __init cpm_muram_init(void)
+int cpm_muram_init(void)
 {
 	struct device_node *np;
 	struct resource r;
@@ -81,6 +81,9 @@ int __init cpm_muram_init(void)
 	int i = 0;
 	int ret = 0;
 
+	if (muram_pbase)
+		return 0;
+
 	spin_lock_init(&cpm_muram_lock);
 	/* initialize the info header */
 	rh_init(&cpm_muram_info, 1,
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index ae3c4db86fe8..bafc3f85360d 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -160,7 +160,7 @@ static int dart_build(struct iommu_table *tbl, long index,
 
 	dp = ((unsigned int*)tbl->it_base) + index;
 
-	/* On U3, all memory is contigous, so we can move this
+	/* On U3, all memory is contiguous, so we can move this
 	 * out of the loop.
 	 */
 	l = npages;
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index da38a1ff97bb..62e50258cdef 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -47,7 +47,7 @@ static struct irq_chip fsl_msi_chip = {
 	.mask		= mask_msi_irq,
 	.unmask		= unmask_msi_irq,
 	.ack		= fsl_msi_end_irq,
-	.typename	= " FSL-MSI  ",
+	.name	= " FSL-MSI  ",
 };
 
 static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
@@ -55,7 +55,7 @@ static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
 {
 	struct irq_chip *chip = &fsl_msi_chip;
 
-	get_irq_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
+	irq_to_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
 
 	set_irq_chip_and_handler(virq, chip, handle_edge_irq);
 
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index ae88b1448018..4e3a3e345ab3 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -56,7 +56,7 @@ static int __init fsl_pcie_check_link(struct pci_controller *hose)
 	return 0;
 }
 
-#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
 static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
 	unsigned int index, const struct resource *res,
 	resource_size_t offset)
@@ -392,9 +392,23 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header);
-#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header);
+#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
 
 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header);
diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
new file mode 100644
index 000000000000..a7635a993dca
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -0,0 +1,88 @@
+/*
+ * Suspend/resume support
+ *
+ * Copyright 2009  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/suspend.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/of_platform.h>
+
+struct pmc_regs {
+	__be32 devdisr;
+	__be32 devdisr2;
+	__be32 :32;
+	__be32 :32;
+	__be32 pmcsr;
+#define PMCSR_SLP	(1 << 17)
+};
+
+static struct device *pmc_dev;
+static struct pmc_regs __iomem *pmc_regs;
+
+static int pmc_suspend_enter(suspend_state_t state)
+{
+	int ret;
+
+	setbits32(&pmc_regs->pmcsr, PMCSR_SLP);
+	/* At this point, the CPU is asleep. */
+
+	/* Upon resume, wait for SLP bit to be clear. */
+	ret = spin_event_timeout((in_be32(&pmc_regs->pmcsr) & PMCSR_SLP) == 0,
+				 10000, 10) ? 0 : -ETIMEDOUT;
+	if (ret)
+		dev_err(pmc_dev, "tired waiting for SLP bit to clear\n");
+	return ret;
+}
+
+static int pmc_suspend_valid(suspend_state_t state)
+{
+	if (state != PM_SUSPEND_STANDBY)
+		return 0;
+	return 1;
+}
+
+static struct platform_suspend_ops pmc_suspend_ops = {
+	.valid = pmc_suspend_valid,
+	.enter = pmc_suspend_enter,
+};
+
+static int pmc_probe(struct of_device *ofdev, const struct of_device_id *id)
+{
+	pmc_regs = of_iomap(ofdev->node, 0);
+	if (!pmc_regs)
+		return -ENOMEM;
+
+	pmc_dev = &ofdev->dev;
+	suspend_set_ops(&pmc_suspend_ops);
+	return 0;
+}
+
+static const struct of_device_id pmc_ids[] = {
+	{ .compatible = "fsl,mpc8548-pmc", },
+	{ .compatible = "fsl,mpc8641d-pmc", },
+	{ },
+};
+
+static struct of_platform_driver pmc_driver = {
+	.driver.name = "fsl-pmc",
+	.match_table = pmc_ids,
+	.probe = pmc_probe,
+};
+
+static int __init pmc_init(void)
+{
+	return of_register_platform_driver(&pmc_driver);
+}
+device_initcall(pmc_init);
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index adca4affcf1f..b91f7acdda6f 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -372,7 +372,7 @@ err:
 
 arch_initcall(fsl_usb_of_init);
 
-#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
 static __be32 __iomem *rstcr;
 
 static int __init setup_rstcr(void)
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index a96584ab33dd..0a55db8a5a29 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -135,7 +135,7 @@ static void i8259_unmask_irq(unsigned int irq_nr)
 }
 
 static struct irq_chip i8259_pic = {
-	.typename	= " i8259    ",
+	.name		= " i8259    ",
 	.mask		= i8259_mask_irq,
 	.disable	= i8259_mask_irq,
 	.unmask		= i8259_unmask_irq,
@@ -175,12 +175,12 @@ static int i8259_host_map(struct irq_host *h, unsigned int virq,
 
 	/* We block the internal cascade */
 	if (hw == 2)
-		get_irq_desc(virq)->status |= IRQ_NOREQUEST;
+		irq_to_desc(virq)->status |= IRQ_NOREQUEST;
 
 	/* We use the level handler only for now, we might want to
 	 * be more cautious here but that works for now
 	 */
-	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	irq_to_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_and_handler(virq, &i8259_pic, handle_level_irq);
 	return 0;
 }
@@ -198,7 +198,7 @@ static void i8259_host_unmap(struct irq_host *h, unsigned int virq)
 }
 
 static int i8259_host_xlate(struct irq_host *h, struct device_node *ct,
-			    u32 *intspec, unsigned int intsize,
+			    const u32 *intspec, unsigned int intsize,
 			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 {
 	static unsigned char map_isa_senses[4] = {
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index cb7689c4bfbd..28cdddd2f89e 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -605,7 +605,7 @@ static int ipic_set_irq_type(unsigned int virq, unsigned int flow_type)
 {
 	struct ipic *ipic = ipic_from_irq(virq);
 	unsigned int src = ipic_irq_to_hw(virq);
-	struct irq_desc *desc = get_irq_desc(virq);
+	struct irq_desc *desc = irq_to_desc(virq);
 	unsigned int vold, vnew, edibit;
 
 	if (flow_type == IRQ_TYPE_NONE)
@@ -660,7 +660,7 @@ static int ipic_set_irq_type(unsigned int virq, unsigned int flow_type)
 
 /* level interrupts and edge interrupts have different ack operations */
 static struct irq_chip ipic_level_irq_chip = {
-	.typename	= " IPIC  ",
+	.name		= " IPIC  ",
 	.unmask		= ipic_unmask_irq,
 	.mask		= ipic_mask_irq,
 	.mask_ack	= ipic_mask_irq,
@@ -668,7 +668,7 @@ static struct irq_chip ipic_level_irq_chip = {
 };
 
 static struct irq_chip ipic_edge_irq_chip = {
-	.typename	= " IPIC  ",
+	.name		= " IPIC  ",
 	.unmask		= ipic_unmask_irq,
 	.mask		= ipic_mask_irq,
 	.mask_ack	= ipic_mask_irq_and_ack,
@@ -697,7 +697,7 @@ static int ipic_host_map(struct irq_host *h, unsigned int virq,
 }
 
 static int ipic_host_xlate(struct irq_host *h, struct device_node *ct,
-			   u32 *intspec, unsigned int intsize,
+			   const u32 *intspec, unsigned int intsize,
 			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 
 {
diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c
index 5d2d5522ef41..69bd6f4dff83 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.c
+++ b/arch/powerpc/sysdev/mpc8xx_pic.c
@@ -72,7 +72,7 @@ static void mpc8xx_end_irq(unsigned int virq)
 
 static int mpc8xx_set_irq_type(unsigned int virq, unsigned int flow_type)
 {
-	struct irq_desc *desc = get_irq_desc(virq);
+	struct irq_desc *desc = irq_to_desc(virq);
 
 	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
 	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
@@ -94,7 +94,7 @@ static int mpc8xx_set_irq_type(unsigned int virq, unsigned int flow_type)
 }
 
 static struct irq_chip mpc8xx_pic = {
-	.typename = " MPC8XX SIU ",
+	.name = " MPC8XX SIU ",
 	.unmask = mpc8xx_unmask_irq,
 	.mask = mpc8xx_mask_irq,
 	.ack = mpc8xx_ack,
@@ -130,7 +130,7 @@ static int mpc8xx_pic_host_map(struct irq_host *h, unsigned int virq,
 
 
 static int mpc8xx_pic_host_xlate(struct irq_host *h, struct device_node *ct,
-			    u32 *intspec, unsigned int intsize,
+			    const u32 *intspec, unsigned int intsize,
 			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 {
 	static unsigned char map_pic_senses[4] = {
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 30c44e6b0413..aa9d06e5925b 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -572,7 +572,7 @@ static int irq_choose_cpu(unsigned int virt_irq)
 	cpumask_t mask;
 	int cpuid;
 
-	cpumask_copy(&mask, irq_desc[virt_irq].affinity);
+	cpumask_copy(&mask, irq_to_desc(virt_irq)->affinity);
 	if (cpus_equal(mask, CPU_MASK_ALL)) {
 		static int irq_rover;
 		static DEFINE_SPINLOCK(irq_rover_lock);
@@ -621,7 +621,7 @@ static struct mpic *mpic_find(unsigned int irq)
 	if (irq < NUM_ISA_INTERRUPTS)
 		return NULL;
 
-	return irq_desc[irq].chip_data;
+	return irq_to_desc(irq)->chip_data;
 }
 
 /* Determine if the linux irq is an IPI */
@@ -648,14 +648,14 @@ static inline u32 mpic_physmask(u32 cpumask)
 /* Get the mpic structure from the IPI number */
 static inline struct mpic * mpic_from_ipi(unsigned int ipi)
 {
-	return irq_desc[ipi].chip_data;
+	return irq_to_desc(ipi)->chip_data;
 }
 #endif
 
 /* Get the mpic structure from the irq number */
 static inline struct mpic * mpic_from_irq(unsigned int irq)
 {
-	return irq_desc[irq].chip_data;
+	return irq_to_desc(irq)->chip_data;
 }
 
 /* Send an EOI */
@@ -735,7 +735,7 @@ static void mpic_unmask_ht_irq(unsigned int irq)
 
 	mpic_unmask_irq(irq);
 
-	if (irq_desc[irq].status & IRQ_LEVEL)
+	if (irq_to_desc(irq)->status & IRQ_LEVEL)
 		mpic_ht_end_irq(mpic, src);
 }
 
@@ -745,7 +745,7 @@ static unsigned int mpic_startup_ht_irq(unsigned int irq)
 	unsigned int src = mpic_irq_to_hw(irq);
 
 	mpic_unmask_irq(irq);
-	mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
+	mpic_startup_ht_interrupt(mpic, src, irq_to_desc(irq)->status);
 
 	return 0;
 }
@@ -755,7 +755,7 @@ static void mpic_shutdown_ht_irq(unsigned int irq)
 	struct mpic *mpic = mpic_from_irq(irq);
 	unsigned int src = mpic_irq_to_hw(irq);
 
-	mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status);
+	mpic_shutdown_ht_interrupt(mpic, src, irq_to_desc(irq)->status);
 	mpic_mask_irq(irq);
 }
 
@@ -772,7 +772,7 @@ static void mpic_end_ht_irq(unsigned int irq)
 	 * latched another edge interrupt coming in anyway
 	 */
 
-	if (irq_desc[irq].status & IRQ_LEVEL)
+	if (irq_to_desc(irq)->status & IRQ_LEVEL)
 		mpic_ht_end_irq(mpic, src);
 	mpic_eoi(mpic);
 }
@@ -856,7 +856,7 @@ int mpic_set_irq_type(unsigned int virq, unsigned int flow_type)
 {
 	struct mpic *mpic = mpic_from_irq(virq);
 	unsigned int src = mpic_irq_to_hw(virq);
-	struct irq_desc *desc = get_irq_desc(virq);
+	struct irq_desc *desc = irq_to_desc(virq);
 	unsigned int vecpri, vold, vnew;
 
 	DBG("mpic: set_irq_type(mpic:@%p,virq:%d,src:0x%x,type:0x%x)\n",
@@ -994,7 +994,7 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq,
 }
 
 static int mpic_host_xlate(struct irq_host *h, struct device_node *ct,
-			   u32 *intspec, unsigned int intsize,
+			   const u32 *intspec, unsigned int intsize,
 			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 
 {
@@ -1062,19 +1062,19 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	mpic->name = name;
 
 	mpic->hc_irq = mpic_irq_chip;
-	mpic->hc_irq.typename = name;
+	mpic->hc_irq.name = name;
 	if (flags & MPIC_PRIMARY)
 		mpic->hc_irq.set_affinity = mpic_set_affinity;
 #ifdef CONFIG_MPIC_U3_HT_IRQS
 	mpic->hc_ht_irq = mpic_irq_ht_chip;
-	mpic->hc_ht_irq.typename = name;
+	mpic->hc_ht_irq.name = name;
 	if (flags & MPIC_PRIMARY)
 		mpic->hc_ht_irq.set_affinity = mpic_set_affinity;
 #endif /* CONFIG_MPIC_U3_HT_IRQS */
 
 #ifdef CONFIG_SMP
 	mpic->hc_ipi = mpic_ipi_chip;
-	mpic->hc_ipi.typename = name;
+	mpic->hc_ipi.name = name;
 #endif /* CONFIG_SMP */
 
 	mpic->flags = flags;
diff --git a/arch/powerpc/sysdev/mpic_pasemi_msi.c b/arch/powerpc/sysdev/mpic_pasemi_msi.c
index 656cb772b691..0f6ab06f8474 100644
--- a/arch/powerpc/sysdev/mpic_pasemi_msi.c
+++ b/arch/powerpc/sysdev/mpic_pasemi_msi.c
@@ -60,7 +60,7 @@ static struct irq_chip mpic_pasemi_msi_chip = {
 	.eoi		= mpic_end_irq,
 	.set_type	= mpic_set_irq_type,
 	.set_affinity	= mpic_set_affinity,
-	.typename	= "PASEMI-MSI ",
+	.name		= "PASEMI-MSI ",
 };
 
 static int pasemi_msi_check_device(struct pci_dev *pdev, int nvec, int type)
diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c
index 0a8f5a9e87c9..d3caf23e6312 100644
--- a/arch/powerpc/sysdev/mpic_u3msi.c
+++ b/arch/powerpc/sysdev/mpic_u3msi.c
@@ -42,7 +42,7 @@ static struct irq_chip mpic_u3msi_chip = {
 	.eoi		= mpic_end_irq,
 	.set_type	= mpic_set_irq_type,
 	.set_affinity	= mpic_set_affinity,
-	.typename	= "MPIC-U3MSI",
+	.name		= "MPIC-U3MSI",
 };
 
 static u64 read_ht_magic_addr(struct pci_dev *pdev, unsigned int pos)
diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c
index 2aa4ed066db1..485b92477d7c 100644
--- a/arch/powerpc/sysdev/mv64x60_pic.c
+++ b/arch/powerpc/sysdev/mv64x60_pic.c
@@ -213,7 +213,7 @@ static int mv64x60_host_map(struct irq_host *h, unsigned int virq,
 {
 	int level1;
 
-	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	irq_to_desc(virq)->status |= IRQ_LEVEL;
 
 	level1 = (hwirq & MV64x60_LEVEL1_MASK) >> MV64x60_LEVEL1_OFFSET;
 	BUG_ON(level1 > MV64x60_LEVEL1_GPP);
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 464271bea6c9..149393c02c3f 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -27,6 +27,8 @@
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/crc32.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of_platform.h>
 #include <asm/irq.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -65,19 +67,6 @@ static unsigned int qe_num_of_snum;
 
 static phys_addr_t qebase = -1;
 
-int qe_alive_during_sleep(void)
-{
-	static int ret = -1;
-
-	if (ret != -1)
-		return ret;
-
-	ret = !of_find_compatible_node(NULL, NULL, "fsl,mpc8569-pmc");
-
-	return ret;
-}
-EXPORT_SYMBOL(qe_alive_during_sleep);
-
 phys_addr_t get_qe_base(void)
 {
 	struct device_node *qe;
@@ -104,7 +93,7 @@ phys_addr_t get_qe_base(void)
 
 EXPORT_SYMBOL(get_qe_base);
 
-void __init qe_reset(void)
+void qe_reset(void)
 {
 	if (qe_immr == NULL)
 		qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
@@ -330,16 +319,18 @@ EXPORT_SYMBOL(qe_put_snum);
 static int qe_sdma_init(void)
 {
 	struct sdma __iomem *sdma = &qe_immr->sdma;
-	unsigned long sdma_buf_offset;
+	static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM;
 
 	if (!sdma)
 		return -ENODEV;
 
 	/* allocate 2 internal temporary buffers (512 bytes size each) for
 	 * the SDMA */
- 	sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
-	if (IS_ERR_VALUE(sdma_buf_offset))
-		return -ENOMEM;
+	if (IS_ERR_VALUE(sdma_buf_offset)) {
+		sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
+		if (IS_ERR_VALUE(sdma_buf_offset))
+			return -ENOMEM;
+	}
 
 	out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
  	out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
@@ -349,7 +340,7 @@ static int qe_sdma_init(void)
 }
 
 /* The maximum number of RISCs we support */
-#define MAX_QE_RISC     2
+#define MAX_QE_RISC     4
 
 /* Firmware information stored here for qe_get_firmware_info() */
 static struct qe_firmware_info qe_firmware_info;
@@ -658,3 +649,35 @@ unsigned int qe_get_num_of_snums(void)
 	return num_of_snums;
 }
 EXPORT_SYMBOL(qe_get_num_of_snums);
+
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)
+static int qe_resume(struct of_device *ofdev)
+{
+	if (!qe_alive_during_sleep())
+		qe_reset();
+	return 0;
+}
+
+static int qe_probe(struct of_device *ofdev, const struct of_device_id *id)
+{
+	return 0;
+}
+
+static const struct of_device_id qe_ids[] = {
+	{ .compatible = "fsl,qe", },
+	{ },
+};
+
+static struct of_platform_driver qe_driver = {
+	.driver.name = "fsl-qe",
+	.match_table = qe_ids,
+	.probe = qe_probe,
+	.resume = qe_resume,
+};
+
+static int __init qe_drv_init(void)
+{
+	return of_register_platform_driver(&qe_driver);
+}
+device_initcall(qe_drv_init);
+#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 3faa42e03a85..2acc928d1920 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -189,7 +189,7 @@ static inline void qe_ic_write(volatile __be32  __iomem * base, unsigned int reg
 
 static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
 {
-	return irq_desc[virq].chip_data;
+	return irq_to_desc(virq)->chip_data;
 }
 
 #define virq_to_hw(virq)	((unsigned int)irq_map[virq].hwirq)
@@ -237,7 +237,7 @@ static void qe_ic_mask_irq(unsigned int virq)
 }
 
 static struct irq_chip qe_ic_irq_chip = {
-	.typename = " QEIC  ",
+	.name = " QEIC  ",
 	.unmask = qe_ic_unmask_irq,
 	.mask = qe_ic_mask_irq,
 	.mask_ack = qe_ic_mask_irq,
@@ -263,7 +263,7 @@ static int qe_ic_host_map(struct irq_host *h, unsigned int virq,
 	chip = &qe_ic->hc_irq;
 
 	set_irq_chip_data(virq, qe_ic);
-	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	irq_to_desc(virq)->status |= IRQ_LEVEL;
 
 	set_irq_chip_and_handler(virq, chip, handle_level_irq);
 
@@ -271,7 +271,7 @@ static int qe_ic_host_map(struct irq_host *h, unsigned int virq,
 }
 
 static int qe_ic_host_xlate(struct irq_host *h, struct device_node *ct,
-			    u32 * intspec, unsigned int intsize,
+			    const u32 * intspec, unsigned int intsize,
 			    irq_hw_number_t * out_hwirq,
 			    unsigned int *out_flags)
 {
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index cf244a419e96..595034cfb85a 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -376,7 +376,7 @@ static void tsi108_pci_irq_end(u_int irq)
  */
 
 static struct irq_chip tsi108_pci_irq = {
-	.typename = "tsi108_PCI_int",
+	.name = "tsi108_PCI_int",
 	.mask = tsi108_pci_irq_disable,
 	.ack = tsi108_pci_irq_ack,
 	.end = tsi108_pci_irq_end,
@@ -384,7 +384,7 @@ static struct irq_chip tsi108_pci_irq = {
 };
 
 static int pci_irq_host_xlate(struct irq_host *h, struct device_node *ct,
-			    u32 *intspec, unsigned int intsize,
+			    const u32 *intspec, unsigned int intsize,
 			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 {
 	*out_hwirq = intspec[0];
@@ -398,7 +398,7 @@ static int pci_irq_host_map(struct irq_host *h, unsigned int virq,
 	DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
 	if ((virq >= 1) && (virq <= 4)){
 		irq = virq + IRQ_PCI_INTAD_BASE - 1;
-		get_irq_desc(irq)->status |= IRQ_LEVEL;
+		irq_to_desc(irq)->status |= IRQ_LEVEL;
 		set_irq_chip(irq, &tsi108_pci_irq);
 	}
 	return 0;
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index 466ce9ace127..7d10074b3304 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -57,7 +57,7 @@ struct uic {
 
 static void uic_unmask_irq(unsigned int virq)
 {
-	struct irq_desc *desc = get_irq_desc(virq);
+	struct irq_desc *desc = irq_to_desc(virq);
 	struct uic *uic = get_irq_chip_data(virq);
 	unsigned int src = uic_irq_to_hw(virq);
 	unsigned long flags;
@@ -101,7 +101,7 @@ static void uic_ack_irq(unsigned int virq)
 
 static void uic_mask_ack_irq(unsigned int virq)
 {
-	struct irq_desc *desc = get_irq_desc(virq);
+	struct irq_desc *desc = irq_to_desc(virq);
 	struct uic *uic = get_irq_chip_data(virq);
 	unsigned int src = uic_irq_to_hw(virq);
 	unsigned long flags;
@@ -129,7 +129,7 @@ static int uic_set_irq_type(unsigned int virq, unsigned int flow_type)
 {
 	struct uic *uic = get_irq_chip_data(virq);
 	unsigned int src = uic_irq_to_hw(virq);
-	struct irq_desc *desc = get_irq_desc(virq);
+	struct irq_desc *desc = irq_to_desc(virq);
 	unsigned long flags;
 	int trigger, polarity;
 	u32 tr, pr, mask;
@@ -177,7 +177,7 @@ static int uic_set_irq_type(unsigned int virq, unsigned int flow_type)
 }
 
 static struct irq_chip uic_irq_chip = {
-	.typename	= " UIC  ",
+	.name		= " UIC  ",
 	.unmask		= uic_unmask_irq,
 	.mask		= uic_mask_irq,
  	.mask_ack	= uic_mask_ack_irq,
@@ -202,7 +202,7 @@ static int uic_host_map(struct irq_host *h, unsigned int virq,
 }
 
 static int uic_host_xlate(struct irq_host *h, struct device_node *ct,
-			  u32 *intspec, unsigned int intsize,
+			  const u32 *intspec, unsigned int intsize,
 			  irq_hw_number_t *out_hwirq, unsigned int *out_type)
 
 {
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index 40edad520770..1e0ccfaf403e 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -79,7 +79,7 @@ static void xilinx_intc_mask(unsigned int virq)
 
 static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type)
 {
-	struct irq_desc *desc = get_irq_desc(virq);
+	struct irq_desc *desc = irq_to_desc(virq);
 
 	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
 	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
@@ -106,7 +106,7 @@ static void xilinx_intc_level_unmask(unsigned int virq)
 }
 
 static struct irq_chip xilinx_intc_level_irqchip = {
-	.typename = "Xilinx Level INTC",
+	.name = "Xilinx Level INTC",
 	.mask = xilinx_intc_mask,
 	.mask_ack = xilinx_intc_mask,
 	.unmask = xilinx_intc_level_unmask,
@@ -133,7 +133,7 @@ static void xilinx_intc_edge_ack(unsigned int virq)
 }
 
 static struct irq_chip xilinx_intc_edge_irqchip = {
-	.typename = "Xilinx Edge  INTC",
+	.name = "Xilinx Edge  INTC",
 	.mask = xilinx_intc_mask,
 	.unmask = xilinx_intc_edge_unmask,
 	.ack = xilinx_intc_edge_ack,
@@ -148,7 +148,7 @@ static struct irq_chip xilinx_intc_edge_irqchip = {
  * xilinx_intc_xlate - translate virq# from device tree interrupts property
  */
 static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct,
-				u32 *intspec, unsigned int intsize,
+				const u32 *intspec, unsigned int intsize,
 				irq_hw_number_t *out_hwirq,
 				unsigned int *out_flags)
 {
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index bdbe96c8a7e4..4e6152c13764 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -1641,7 +1641,8 @@ static void super_regs(void)
 			       ptrLpPaca->saved_srr0, ptrLpPaca->saved_srr1);
 			printf("    Saved Gpr3=%.16lx  Saved Gpr4=%.16lx \n",
 			       ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4);
-			printf("    Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5);
+			printf("    Saved Gpr5=%.16lx \n",
+				ptrLpPaca->gpr5_dword.saved_gpr5);
 		}
 #endif
 
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 43c0acad7160..c80235206c01 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -95,6 +95,34 @@ config S390
 	select HAVE_ARCH_TRACEHOOK
 	select INIT_ALL_POSSIBLE
 	select HAVE_PERF_EVENTS
+	select ARCH_INLINE_SPIN_TRYLOCK
+	select ARCH_INLINE_SPIN_TRYLOCK_BH
+	select ARCH_INLINE_SPIN_LOCK
+	select ARCH_INLINE_SPIN_LOCK_BH
+	select ARCH_INLINE_SPIN_LOCK_IRQ
+	select ARCH_INLINE_SPIN_LOCK_IRQSAVE
+	select ARCH_INLINE_SPIN_UNLOCK
+	select ARCH_INLINE_SPIN_UNLOCK_BH
+	select ARCH_INLINE_SPIN_UNLOCK_IRQ
+	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
+	select ARCH_INLINE_READ_TRYLOCK
+	select ARCH_INLINE_READ_LOCK
+	select ARCH_INLINE_READ_LOCK_BH
+	select ARCH_INLINE_READ_LOCK_IRQ
+	select ARCH_INLINE_READ_LOCK_IRQSAVE
+	select ARCH_INLINE_READ_UNLOCK
+	select ARCH_INLINE_READ_UNLOCK_BH
+	select ARCH_INLINE_READ_UNLOCK_IRQ
+	select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
+	select ARCH_INLINE_WRITE_TRYLOCK
+	select ARCH_INLINE_WRITE_LOCK
+	select ARCH_INLINE_WRITE_LOCK_BH
+	select ARCH_INLINE_WRITE_LOCK_IRQ
+	select ARCH_INLINE_WRITE_LOCK_IRQSAVE
+	select ARCH_INLINE_WRITE_UNLOCK
+	select ARCH_INLINE_WRITE_UNLOCK_BH
+	select ARCH_INLINE_WRITE_UNLOCK_IRQ
+	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
 
 config SCHED_OMIT_FRAME_POINTER
 	bool
@@ -192,23 +220,8 @@ config AUDIT_ARCH
 	bool
 	default y
 
-config S390_SWITCH_AMODE
-	bool "Switch kernel/user addressing modes"
-	help
-	  This option allows to switch the addressing modes of kernel and user
-	  space. The kernel parameter switch_amode=on will enable this feature,
-	  default is disabled. Enabling this (via kernel parameter) on machines
-	  earlier than IBM System z9-109 EC/BC will reduce system performance.
-
-	  Note that this option will also be selected by selecting the execute
-	  protection option below. Enabling the execute protection via the
-	  noexec kernel parameter will also switch the addressing modes,
-	  independent of the switch_amode kernel parameter.
-
-
 config S390_EXEC_PROTECT
 	bool "Data execute protection"
-	select S390_SWITCH_AMODE
 	help
 	  This option allows to enable a buffer overflow protection for user
 	  space programs and it also selects the addressing mode option above.
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index b55fd7ed1c31..495589950dc7 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -61,12 +61,12 @@ static struct ctl_table appldata_table[] = {
 	{
 		.procname	= "timer",
 		.mode		= S_IRUGO | S_IWUSR,
-		.proc_handler	= &appldata_timer_handler,
+		.proc_handler	= appldata_timer_handler,
 	},
 	{
 		.procname	= "interval",
 		.mode		= S_IRUGO | S_IWUSR,
-		.proc_handler	= &appldata_interval_handler,
+		.proc_handler	= appldata_interval_handler,
 	},
 	{ },
 };
diff --git a/arch/s390/appldata/appldata_net_sum.c b/arch/s390/appldata/appldata_net_sum.c
index fa741f84c5b9..4ce7fa95880f 100644
--- a/arch/s390/appldata/appldata_net_sum.c
+++ b/arch/s390/appldata/appldata_net_sum.c
@@ -83,8 +83,9 @@ static void appldata_get_net_sum_data(void *data)
 	rx_dropped = 0;
 	tx_dropped = 0;
 	collisions = 0;
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		const struct net_device_stats *stats = dev_get_stats(dev);
 
 		rx_packets += stats->rx_packets;
@@ -98,7 +99,8 @@ static void appldata_get_net_sum_data(void *data)
 		collisions += stats->collisions;
 		i++;
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
+
 	net_data->nr_interfaces = i;
 	net_data->rx_packets = rx_packets;
 	net_data->tx_packets = tx_packets;
diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c
index b49c00ce65e9..a3209906739e 100644
--- a/arch/s390/crypto/prng.c
+++ b/arch/s390/crypto/prng.c
@@ -6,7 +6,6 @@
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/smp_lock.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -49,7 +48,6 @@ static unsigned char parm_block[32] = {
 
 static int prng_open(struct inode *inode, struct file *file)
 {
-	cycle_kernel_lock();
 	return nonseekable_open(inode, file);
 }
 
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index ab4464486b7a..f4e53c6708dc 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -185,7 +185,6 @@ CONFIG_HOTPLUG_CPU=y
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_AUDIT_ARCH=y
-CONFIG_S390_SWITCH_AMODE=y
 CONFIG_S390_EXEC_PROTECT=y
 
 #
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index ae7c8f9f94a5..2a113d6a7dfd 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -21,7 +21,7 @@
 #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
 
 #define __CS_LOOP(ptr, op_val, op_string) ({				\
-	typeof(ptr->counter) old_val, new_val;				\
+	int old_val, new_val;						\
 	asm volatile(							\
 		"	l	%0,%2\n"				\
 		"0:	lr	%1,%0\n"				\
@@ -38,7 +38,7 @@
 #else /* __GNUC__ */
 
 #define __CS_LOOP(ptr, op_val, op_string) ({				\
-	typeof(ptr->counter) old_val, new_val;				\
+	int old_val, new_val;						\
 	asm volatile(							\
 		"	l	%0,0(%3)\n"				\
 		"0:	lr	%1,%0\n"				\
@@ -143,7 +143,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
 
 #define __CSG_LOOP(ptr, op_val, op_string) ({				\
-	typeof(ptr->counter) old_val, new_val;				\
+	long long old_val, new_val;					\
 	asm volatile(							\
 		"	lg	%0,%2\n"				\
 		"0:	lgr	%1,%0\n"				\
@@ -160,7 +160,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #else /* __GNUC__ */
 
 #define __CSG_LOOP(ptr, op_val, op_string) ({				\
-	typeof(ptr->counter) old_val, new_val;				\
+	long long old_val, new_val;					\
 	asm volatile(							\
 		"	lg	%0,0(%3)\n"				\
 		"0:	lgr	%1,%0\n"				\
diff --git a/arch/s390/include/asm/bug.h b/arch/s390/include/asm/bug.h
index 7efd0abe8887..efb74fd5156e 100644
--- a/arch/s390/include/asm/bug.h
+++ b/arch/s390/include/asm/bug.h
@@ -49,7 +49,7 @@
 
 #define BUG() do {					\
 	__EMIT_BUG(0);					\
-	for (;;);					\
+	unreachable();					\
 } while (0)
 
 #define WARN_ON(x) ({					\
diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h
index 49d5af916d01..405cc97c6249 100644
--- a/arch/s390/include/asm/cacheflush.h
+++ b/arch/s390/include/asm/cacheflush.h
@@ -10,6 +10,7 @@
 #define flush_cache_dup_mm(mm)			do { } while (0)
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h
index 2a5419551176..f4bd346a52d3 100644
--- a/arch/s390/include/asm/ccwdev.h
+++ b/arch/s390/include/asm/ccwdev.h
@@ -142,6 +142,8 @@ struct ccw1;
 extern int ccw_device_set_options_mask(struct ccw_device *, unsigned long);
 extern int ccw_device_set_options(struct ccw_device *, unsigned long);
 extern void ccw_device_clear_options(struct ccw_device *, unsigned long);
+int ccw_device_is_pathgroup(struct ccw_device *cdev);
+int ccw_device_is_multipath(struct ccw_device *cdev);
 
 /* Allow for i/o completion notification after primary interrupt status. */
 #define CCWDEV_EARLY_NOTIFICATION	0x0001
@@ -151,6 +153,8 @@ extern void ccw_device_clear_options(struct ccw_device *, unsigned long);
 #define CCWDEV_DO_PATHGROUP             0x0004
 /* Allow forced onlining of boxed devices. */
 #define CCWDEV_ALLOW_FORCE              0x0008
+/* Try to use multipath mode. */
+#define CCWDEV_DO_MULTIPATH		0x0010
 
 extern int ccw_device_start(struct ccw_device *, struct ccw1 *,
 			    unsigned long, __u8, unsigned long);
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index f23961ada7fb..258ba88b7b50 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -183,6 +183,7 @@ struct s390_idle_data {
 	unsigned long long idle_count;
 	unsigned long long idle_enter;
 	unsigned long long idle_time;
+	int nohz_delay;
 };
 
 DECLARE_PER_CPU(struct s390_idle_data, s390_idle);
@@ -198,4 +199,11 @@ static inline void s390_idle_check(void)
 		vtime_start_cpu();
 }
 
+static inline int s390_nohz_delay(int cpu)
+{
+	return per_cpu(s390_idle, cpu).nohz_delay != 0;
+}
+
+#define arch_needs_cpu(cpu) s390_nohz_delay(cpu)
+
 #endif /* _S390_CPUTIME_H */
diff --git a/arch/s390/include/asm/kvm.h b/arch/s390/include/asm/kvm.h
index 3dfcaeb5d7f4..82b32a100c7d 100644
--- a/arch/s390/include/asm/kvm.h
+++ b/arch/s390/include/asm/kvm.h
@@ -1,6 +1,5 @@
 #ifndef __LINUX_KVM_S390_H
 #define __LINUX_KVM_S390_H
-
 /*
  * asm-s390/kvm.h - KVM s390 specific structures and definitions
  *
@@ -15,6 +14,8 @@
  */
 #include <linux/types.h>
 
+#define __KVM_S390
+
 /* for KVM_GET_REGS and KVM_SET_REGS */
 struct kvm_regs {
 	/* general purpose regs for s390 */
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index fc7edd6f41b6..976e273988c2 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -36,7 +36,7 @@ static inline int init_new_context(struct task_struct *tsk,
 		mm->context.has_pgste = 1;
 		mm->context.alloc_pgste = 1;
 	} else {
-		mm->context.noexec = s390_noexec;
+		mm->context.noexec = (user_mode == SECONDARY_SPACE_MODE);
 		mm->context.has_pgste = 0;
 		mm->context.alloc_pgste = 0;
 	}
@@ -58,7 +58,7 @@ static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk)
 	pgd_t *pgd = mm->pgd;
 
 	S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd);
-	if (switch_amode) {
+	if (user_mode != HOME_SPACE_MODE) {
 		/* Load primary space page table origin. */
 		pgd = mm->context.noexec ? get_shadow_table(pgd) : pgd;
 		S390_lowcore.user_exec_asce = mm->context.asce_bits | __pa(pgd);
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index ddad5903341c..68940d0bad91 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -143,7 +143,8 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 	spin_lock_init(&mm->context.list_lock);
 	INIT_LIST_HEAD(&mm->context.crst_list);
 	INIT_LIST_HEAD(&mm->context.pgtable_list);
-	return (pgd_t *) crst_table_alloc(mm, s390_noexec);
+	return (pgd_t *)
+		crst_table_alloc(mm, user_mode == SECONDARY_SPACE_MODE);
 }
 #define pgd_free(mm, pgd) crst_table_free(mm, (unsigned long *) pgd)
 
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 60a7b1a1702f..e2fa79cf0614 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -169,12 +169,13 @@ extern unsigned long VMALLOC_START;
  * STL Segment-Table-Length:  Segment-table length (STL+1*16 entries -> up to 2048)
  *
  * A 64 bit pagetable entry of S390 has following format:
- * |                     PFRA                         |0IP0|  OS  |
+ * |			 PFRA			      |0IPC|  OS  |
  * 0000000000111111111122222222223333333333444444444455555555556666
  * 0123456789012345678901234567890123456789012345678901234567890123
  *
  * I Page-Invalid Bit:    Page is not available for address-translation
  * P Page-Protection Bit: Store access not possible for page
+ * C Change-bit override: HW is not required to set change bit
  *
  * A 64 bit segmenttable entry of S390 has following format:
  * |        P-table origin                              |      TT
@@ -218,6 +219,7 @@ extern unsigned long VMALLOC_START;
  */
 
 /* Hardware bits in the page table entry */
+#define _PAGE_CO	0x100		/* HW Change-bit override */
 #define _PAGE_RO	0x200		/* HW read-only bit  */
 #define _PAGE_INVALID	0x400		/* HW invalid bit    */
 
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index e37478e87286..52a779c337e8 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -49,17 +49,12 @@ extern unsigned long memory_end;
 
 void detect_memory_layout(struct mem_chunk chunk[]);
 
-#ifdef CONFIG_S390_SWITCH_AMODE
-extern unsigned int switch_amode;
-#else
-#define switch_amode	(0)
-#endif
-
-#ifdef CONFIG_S390_EXEC_PROTECT
-extern unsigned int s390_noexec;
-#else
-#define s390_noexec	(0)
-#endif
+#define PRIMARY_SPACE_MODE	0
+#define ACCESS_REGISTER_MODE	1
+#define SECONDARY_SPACE_MODE	2
+#define HOME_SPACE_MODE		3
+
+extern unsigned int user_mode;
 
 /*
  * Machine features detected in head.S
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index a868b272c257..2ab1141eeb50 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -1,57 +1,22 @@
 /*
- *  include/asm-s390/smp.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com)
- *               Heiko Carstens (heiko.carstens@de.ibm.com)
+ *    Copyright IBM Corp. 1999,2009
+ *    Author(s): Denis Joseph Barrow,
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *		 Heiko Carstens <heiko.carstens@de.ibm.com>,
  */
 #ifndef __ASM_SMP_H
 #define __ASM_SMP_H
 
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/bitops.h>
+#ifdef CONFIG_SMP
 
-#if defined(__KERNEL__) && defined(CONFIG_SMP) && !defined(__ASSEMBLY__)
-
-#include <asm/lowcore.h>
-#include <asm/sigp.h>
-#include <asm/ptrace.h>
 #include <asm/system.h>
-
-/*
-  s390 specific smp.c headers
- */
-typedef struct
-{
-	int        intresting;
-	sigp_ccode ccode; 
-	__u32      status;
-	__u16      cpu;
-} sigp_info;
+#include <asm/sigp.h>
 
 extern void machine_restart_smp(char *);
 extern void machine_halt_smp(void);
 extern void machine_power_off_smp(void);
 
-#define NO_PROC_ID		0xFF		/* No processor magic marker */
-
-/*
- *	This magic constant controls our willingness to transfer
- *	a process across CPUs. Such a transfer incurs misses on the L1
- *	cache, and on a P6 or P5 with multiple L2 caches L2 hits. My
- *	gut feeling is this will vary by board in value. For a board
- *	with separate L2 cache it probably depends also on the RSS, and
- *	for a board with shared L2 cache it ought to decay fast as other
- *	processes are run.
- */
- 
-#define PROC_CHANGE_PENALTY	20		/* Schedule penalty */
-
 #define raw_smp_processor_id()	(S390_lowcore.cpu_nr)
-#define cpu_logical_map(cpu)	(cpu)
 
 extern int __cpu_disable (void);
 extern void __cpu_die (unsigned int cpu);
@@ -64,7 +29,9 @@ extern int smp_cpu_polarization[];
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
-#endif
+extern union save_area *zfcpdump_save_areas[NR_CPUS + 1];
+
+#endif /* CONFIG_SMP */
 
 #ifdef CONFIG_HOTPLUG_CPU
 extern int smp_rescan_cpus(void);
@@ -72,5 +39,4 @@ extern int smp_rescan_cpus(void);
 static inline int smp_rescan_cpus(void) { return 0; }
 #endif
 
-extern union save_area *zfcpdump_save_areas[NR_CPUS + 1];
-#endif
+#endif /* __ASM_SMP_H */
diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h
index e42df89a0b85..fdff1e995c73 100644
--- a/arch/s390/include/asm/socket.h
+++ b/arch/s390/include/asm/socket.h
@@ -68,4 +68,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/s390/include/asm/sockios.h b/arch/s390/include/asm/sockios.h
index f4fc16c7da59..6f60eee73242 100644
--- a/arch/s390/include/asm/sockios.h
+++ b/arch/s390/include/asm/sockios.h
@@ -1,21 +1,6 @@
-/*
- *  include/asm-s390/sockios.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/sockios.h"
- */
+#ifndef _ASM_S390_SOCKIOS_H
+#define _ASM_S390_SOCKIOS_H
 
-#ifndef __ARCH_S390_SOCKIOS__
-#define __ARCH_S390_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+#include <asm-generic/sockios.h>
 
 #endif
diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h
index 41ce6861174e..c9af0d19c7ab 100644
--- a/arch/s390/include/asm/spinlock.h
+++ b/arch/s390/include/asm/spinlock.h
@@ -191,33 +191,4 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw)
 #define _raw_read_relax(lock)	cpu_relax()
 #define _raw_write_relax(lock)	cpu_relax()
 
-#define __always_inline__spin_lock
-#define __always_inline__read_lock
-#define __always_inline__write_lock
-#define __always_inline__spin_lock_bh
-#define __always_inline__read_lock_bh
-#define __always_inline__write_lock_bh
-#define __always_inline__spin_lock_irq
-#define __always_inline__read_lock_irq
-#define __always_inline__write_lock_irq
-#define __always_inline__spin_lock_irqsave
-#define __always_inline__read_lock_irqsave
-#define __always_inline__write_lock_irqsave
-#define __always_inline__spin_trylock
-#define __always_inline__read_trylock
-#define __always_inline__write_trylock
-#define __always_inline__spin_trylock_bh
-#define __always_inline__spin_unlock
-#define __always_inline__read_unlock
-#define __always_inline__write_unlock
-#define __always_inline__spin_unlock_bh
-#define __always_inline__read_unlock_bh
-#define __always_inline__write_unlock_bh
-#define __always_inline__spin_unlock_irq
-#define __always_inline__read_unlock_irq
-#define __always_inline__write_unlock_irq
-#define __always_inline__spin_unlock_irqrestore
-#define __always_inline__read_unlock_irqrestore
-#define __always_inline__write_unlock_irqrestore
-
 #endif /* __ASM_SPINLOCK_H */
diff --git a/arch/s390/include/asm/termbits.h b/arch/s390/include/asm/termbits.h
index 58731853d529..71bf6ac6a2b9 100644
--- a/arch/s390/include/asm/termbits.h
+++ b/arch/s390/include/asm/termbits.h
@@ -1,206 +1,6 @@
-/*
- *  include/asm-s390/termbits.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/termbits.h"
- */
+#ifndef _ASM_S390_TERMBITS_H
+#define _ASM_S390_TERMBITS_H
 
-#ifndef __ARCH_S390_TERMBITS_H__
-#define __ARCH_S390_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define  BOTHER  0010000
-#define  B57600  0010001
-#define  B115200 0010002
-#define  B230400 0010003
-#define  B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000	/* input baud rate */
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
+#include <asm-generic/termbits.h>
 
 #endif
diff --git a/arch/s390/include/asm/todclk.h b/arch/s390/include/asm/todclk.h
deleted file mode 100644
index c7f62055488a..000000000000
--- a/arch/s390/include/asm/todclk.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * File...........: linux/include/asm/todclk.h
- * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
- * Bugreports.to..: <Linux390@de.ibm.com>
- * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
- *
- * History of changes (starts July 2000)
- */
-
-#ifndef __ASM_TODCLK_H
-#define __ASM_TODCLK_H
-
-#ifdef __KERNEL__
-
-#define TOD_uSEC (0x1000ULL)
-#define TOD_mSEC (1000 * TOD_uSEC)
-#define TOD_SEC (1000 * TOD_mSEC)
-#define TOD_MIN (60 * TOD_SEC)
-#define TOD_HOUR (60 * TOD_MIN)
-
-#endif
-
-#endif
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index 8377e91533d2..cbf0a8745bf4 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -93,6 +93,8 @@ extern struct uaccess_ops uaccess_mvcos;
 extern struct uaccess_ops uaccess_mvcos_switch;
 extern struct uaccess_ops uaccess_pt;
 
+extern int __handle_fault(unsigned long, unsigned long, int);
+
 static inline int __put_user_fn(size_t size, void __user *ptr, void *x)
 {
 	size = uaccess.copy_to_user_small(size, ptr, x);
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index c7be8e10b87e..683f6381cc59 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_FUNCTION_TRACER)	+= $(if $(CONFIG_64BIT),mcount64.o,mcount.o)
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
+obj-$(CONFIG_FTRACE_SYSCALLS)  += ftrace.o
 
 # Kexec part
 S390_KEXEC_OBJS := machine_kexec.o crash.o
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 0debcec23a39..22c9e557bb22 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -31,14 +31,8 @@
 #include <linux/shm.h>
 #include <linux/slab.h>
 #include <linux/uio.h>
-#include <linux/nfs_fs.h>
 #include <linux/quota.h>
 #include <linux/module.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/nfsd/nfsd.h>
-#include <linux/nfsd/cache.h>
-#include <linux/nfsd/xdr.h>
-#include <linux/nfsd/syscall.h>
 #include <linux/poll.h>
 #include <linux/personality.h>
 #include <linux/stat.h>
@@ -527,59 +521,6 @@ asmlinkage long sys32_sendfile64(int out_fd, int in_fd,
 	return ret;
 }
 
-#ifdef CONFIG_SYSCTL_SYSCALL
-struct __sysctl_args32 {
-	u32 name;
-	int nlen;
-	u32 oldval;
-	u32 oldlenp;
-	u32 newval;
-	u32 newlen;
-	u32 __unused[4];
-};
-
-asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args)
-{
-	struct __sysctl_args32 tmp;
-	int error;
-	size_t oldlen;
-	size_t __user *oldlenp = NULL;
-	unsigned long addr = (((unsigned long)&args->__unused[0]) + 7) & ~7;
-
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		return -EFAULT;
-
-	if (tmp.oldval && tmp.oldlenp) {
-		/* Duh, this is ugly and might not work if sysctl_args
-		   is in read-only memory, but do_sysctl does indirectly
-		   a lot of uaccess in both directions and we'd have to
-		   basically copy the whole sysctl.c here, and
-		   glibc's __sysctl uses rw memory for the structure
-		   anyway.  */
-		if (get_user(oldlen, (u32 __user *)compat_ptr(tmp.oldlenp)) ||
-		    put_user(oldlen, (size_t __user *)addr))
-			return -EFAULT;
-		oldlenp = (size_t __user *)addr;
-	}
-
-	lock_kernel();
-	error = do_sysctl(compat_ptr(tmp.name), tmp.nlen, compat_ptr(tmp.oldval),
-			  oldlenp, compat_ptr(tmp.newval), tmp.newlen);
-	unlock_kernel();
-	if (oldlenp) {
-		if (!error) {
-			if (get_user(oldlen, (size_t __user *)addr) ||
-			    put_user(oldlen, (u32 __user *)compat_ptr(tmp.oldlenp)))
-				error = -EFAULT;
-		}
-		if (copy_to_user(args->__unused, tmp.__unused,
-				 sizeof(tmp.__unused)))
-			error = -EFAULT;
-	}
-	return error;
-}
-#endif
-
 struct stat64_emu31 {
 	unsigned long long  st_dev;
 	unsigned int    __pad1;
@@ -683,38 +624,6 @@ struct mmap_arg_struct_emu31 {
 	u32	offset;
 };
 
-/* common code for old and new mmaps */
-static inline long do_mmap2(
-	unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long pgoff)
-{
-	struct file * file = NULL;
-	unsigned long error = -EBADF;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	if (!IS_ERR((void *) error) && error + len >= 0x80000000ULL) {
-		/* Result is out of bounds.  */
-		do_munmap(current->mm, addr, len);
-		error = -ENOMEM;
-	}
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:    
-	return error;
-}
-
-
 asmlinkage unsigned long
 old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
 {
@@ -728,7 +637,8 @@ old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
 	if (a.offset & ~PAGE_MASK)
 		goto out;
 
-	error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); 
+	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
+			       a.offset >> PAGE_SHIFT);
 out:
 	return error;
 }
@@ -741,7 +651,7 @@ sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
 
 	if (copy_from_user(&a, arg, sizeof(a)))
 		goto out;
-	error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
+	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
 out:
 	return error;
 }
diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h
index c07f9ca05ade..cb97afc85c94 100644
--- a/arch/s390/kernel/compat_linux.h
+++ b/arch/s390/kernel/compat_linux.h
@@ -4,10 +4,6 @@
 #include <linux/compat.h>
 #include <linux/socket.h>
 #include <linux/syscalls.h>
-#include <linux/nfs_fs.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/nfsd/nfsd.h>
-#include <linux/nfsd/export.h>
 
 /* Macro that masks the high order bit of an 32 bit pointer and converts it*/
 /*       to a 64 bit pointer */
@@ -162,7 +158,6 @@ struct ucontext32 {
 	compat_sigset_t		uc_sigmask;	/* mask last for extensibility */
 };
 
-struct __sysctl_args32;
 struct stat64_emu31;
 struct mmap_arg_struct_emu31;
 struct fadvise64_64_args;
@@ -212,7 +207,6 @@ long sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset,
 		    size_t count);
 long sys32_sendfile64(int out_fd, int in_fd, compat_loff_t __user *offset,
 		      s32 count);
-long sys32_sysctl(struct __sysctl_args32 __user *args);
 long sys32_stat64(char __user * filename, struct stat64_emu31 __user * statbuf);
 long sys32_lstat64(char __user * filename,
 		   struct stat64_emu31 __user * statbuf);
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index cbd9901dc0f8..30de2d0e52bb 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -689,8 +689,6 @@ sys32_fdatasync_wrapper:
 	llgfr	%r2,%r2			# unsigned int
 	jg	sys_fdatasync		# branch to system call
 
-#sys32_sysctl_wrapper			# tbd
-
 	.globl	sys32_mlock_wrapper
 sys32_mlock_wrapper:
 	llgfr	%r2,%r2			# unsigned long
@@ -1087,8 +1085,8 @@ sys32_stime_wrapper:
 
 	.globl	sys32_sysctl_wrapper
 sys32_sysctl_wrapper:
-	llgtr	%r2,%r2 		# struct __sysctl_args32 *
-	jg	sys32_sysctl
+	llgtr	%r2,%r2 		# struct compat_sysctl_args *
+	jg	compat_sys_sysctl
 
 	.globl	sys32_fstat64_wrapper
 sys32_fstat64_wrapper:
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 20f282c911c2..071c81f179ef 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -893,35 +893,30 @@ s390dbf_procactive(ctl_table *table, int write,
 
 static struct ctl_table s390dbf_table[] = {
 	{
-		.ctl_name       = CTL_S390DBF_STOPPABLE,
 		.procname       = "debug_stoppable",
 		.data		= &debug_stoppable,
 		.maxlen		= sizeof(int),
 		.mode           = S_IRUGO | S_IWUSR,
-		.proc_handler   = &proc_dointvec,
-		.strategy	= &sysctl_intvec,
+		.proc_handler   = proc_dointvec,
 	},
 	 {
-		.ctl_name       = CTL_S390DBF_ACTIVE,
 		.procname       = "debug_active",
 		.data		= &debug_active,
 		.maxlen		= sizeof(int),
 		.mode           = S_IRUGO | S_IWUSR,
-		.proc_handler   = &s390dbf_procactive,
-		.strategy	= &sysctl_intvec,
+		.proc_handler   = s390dbf_procactive,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table s390dbf_dir_table[] = {
 	{
-		.ctl_name       = CTL_S390DBF,
 		.procname       = "s390dbf",
 		.maxlen         = 0,
 		.mode           = S_IRUGO | S_IXUGO,
 		.child          = s390dbf_table,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table_header *s390dbf_sysctl_header;
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index f5fe34dd821b..5a82bc68193e 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -203,73 +203,10 @@ out:
 
 #ifdef CONFIG_FTRACE_SYSCALLS
 
-extern unsigned long __start_syscalls_metadata[];
-extern unsigned long __stop_syscalls_metadata[];
 extern unsigned int sys_call_table[];
 
-static struct syscall_metadata **syscalls_metadata;
-
-struct syscall_metadata *syscall_nr_to_meta(int nr)
-{
-	if (!syscalls_metadata || nr >= NR_syscalls || nr < 0)
-		return NULL;
-
-	return syscalls_metadata[nr];
-}
-
-int syscall_name_to_nr(char *name)
-{
-	int i;
-
-	if (!syscalls_metadata)
-		return -1;
-	for (i = 0; i < NR_syscalls; i++)
-		if (syscalls_metadata[i])
-			if (!strcmp(syscalls_metadata[i]->name, name))
-				return i;
-	return -1;
-}
-
-void set_syscall_enter_id(int num, int id)
-{
-	syscalls_metadata[num]->enter_id = id;
-}
-
-void set_syscall_exit_id(int num, int id)
+unsigned long __init arch_syscall_addr(int nr)
 {
-	syscalls_metadata[num]->exit_id = id;
-}
-
-static struct syscall_metadata *find_syscall_meta(unsigned long syscall)
-{
-	struct syscall_metadata *start;
-	struct syscall_metadata *stop;
-	char str[KSYM_SYMBOL_LEN];
-
-	start = (struct syscall_metadata *)__start_syscalls_metadata;
-	stop = (struct syscall_metadata *)__stop_syscalls_metadata;
-	kallsyms_lookup(syscall, NULL, NULL, NULL, str);
-
-	for ( ; start < stop; start++) {
-		if (start->name && !strcmp(start->name + 3, str + 3))
-			return start;
-	}
-	return NULL;
-}
-
-static int __init arch_init_ftrace_syscalls(void)
-{
-	struct syscall_metadata *meta;
-	int i;
-	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) * NR_syscalls,
-				    GFP_KERNEL);
-	if (!syscalls_metadata)
-		return -ENOMEM;
-	for (i = 0; i < NR_syscalls; i++) {
-		meta = find_syscall_meta((unsigned long)sys_call_table[i]);
-		syscalls_metadata[i] = meta;
-	}
-	return 0;
+	return (unsigned long)sys_call_table[nr];
 }
-arch_initcall(arch_init_ftrace_syscalls);
 #endif
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index 6a250808092b..d984a2a380c3 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -83,6 +83,8 @@ startup_continue:
 	slr	%r0,%r0 		# set cpuid to zero
 	sigp	%r1,%r0,0x12		# switch to esame mode
 	sam64				# switch to 64 bit mode
+	llgfr	%r13,%r13		# clear high-order half of base reg
+	lmh	%r0,%r15,.Lzero64-.LPG1(%r13)	# clear high-order half
 	lctlg	%c0,%c15,.Lctl-.LPG1(%r13)	# load control registers
 	lg	%r12,.Lparmaddr-.LPG1(%r13)	# pointer to parameter area
 					# move IPL device to lowcore
@@ -127,6 +129,7 @@ startup_continue:
 .L4malign:.quad 0xffffffffffc00000
 .Lscan2g:.quad	0x80000000 + 0x20000 - 8	# 2GB + 128K - 8
 .Lnop:	.long	0x07000700
+.Lzero64:.fill	16,4,0x0
 #ifdef CONFIG_ZFCPDUMP
 .Lcurrent_cpu:
 	.long 0x0
diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c
index 0de305b598ce..59618bcd99b7 100644
--- a/arch/s390/kernel/s390_ext.c
+++ b/arch/s390/kernel/s390_ext.c
@@ -126,6 +126,8 @@ void __irq_entry do_extint(struct pt_regs *regs, unsigned short code)
 		/* Serve timer interrupts first. */
 		clock_comparator_work();
 	kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++;
+	if (code != 0x1004)
+		__get_cpu_var(s390_idle).nohz_delay = 1;
         index = ext_hash(code);
 	for (p = ext_int_hash[index]; p; p = p->next) {
 		if (likely(p->code == code))
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 061479ff029f..0663287fa1b3 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -305,9 +305,8 @@ static int __init early_parse_mem(char *p)
 }
 early_param("mem", early_parse_mem);
 
-#ifdef CONFIG_S390_SWITCH_AMODE
-unsigned int switch_amode = 0;
-EXPORT_SYMBOL_GPL(switch_amode);
+unsigned int user_mode = HOME_SPACE_MODE;
+EXPORT_SYMBOL_GPL(user_mode);
 
 static int set_amode_and_uaccess(unsigned long user_amode,
 				 unsigned long user32_amode)
@@ -340,23 +339,29 @@ static int set_amode_and_uaccess(unsigned long user_amode,
  */
 static int __init early_parse_switch_amode(char *p)
 {
-	switch_amode = 1;
+	if (user_mode != SECONDARY_SPACE_MODE)
+		user_mode = PRIMARY_SPACE_MODE;
 	return 0;
 }
 early_param("switch_amode", early_parse_switch_amode);
 
-#else /* CONFIG_S390_SWITCH_AMODE */
-static inline int set_amode_and_uaccess(unsigned long user_amode,
-					unsigned long user32_amode)
+static int __init early_parse_user_mode(char *p)
 {
+	if (p && strcmp(p, "primary") == 0)
+		user_mode = PRIMARY_SPACE_MODE;
+#ifdef CONFIG_S390_EXEC_PROTECT
+	else if (p && strcmp(p, "secondary") == 0)
+		user_mode = SECONDARY_SPACE_MODE;
+#endif
+	else if (!p || strcmp(p, "home") == 0)
+		user_mode = HOME_SPACE_MODE;
+	else
+		return 1;
 	return 0;
 }
-#endif /* CONFIG_S390_SWITCH_AMODE */
+early_param("user_mode", early_parse_user_mode);
 
 #ifdef CONFIG_S390_EXEC_PROTECT
-unsigned int s390_noexec = 0;
-EXPORT_SYMBOL_GPL(s390_noexec);
-
 /*
  * Enable execute protection?
  */
@@ -364,8 +369,7 @@ static int __init early_parse_noexec(char *p)
 {
 	if (!strncmp(p, "off", 3))
 		return 0;
-	switch_amode = 1;
-	s390_noexec = 1;
+	user_mode = SECONDARY_SPACE_MODE;
 	return 0;
 }
 early_param("noexec", early_parse_noexec);
@@ -373,7 +377,7 @@ early_param("noexec", early_parse_noexec);
 
 static void setup_addressing_mode(void)
 {
-	if (s390_noexec) {
+	if (user_mode == SECONDARY_SPACE_MODE) {
 		if (set_amode_and_uaccess(PSW_ASC_SECONDARY,
 					  PSW32_ASC_SECONDARY))
 			pr_info("Execute protection active, "
@@ -381,7 +385,7 @@ static void setup_addressing_mode(void)
 		else
 			pr_info("Execute protection active, "
 				"mvcos not available\n");
-	} else if (switch_amode) {
+	} else if (user_mode == PRIMARY_SPACE_MODE) {
 		if (set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY))
 			pr_info("Address spaces switched, "
 				"mvcos available\n");
@@ -411,7 +415,7 @@ setup_lowcore(void)
 	lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
 	lc->restart_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
-	if (switch_amode)
+	if (user_mode != HOME_SPACE_MODE)
 		lc->restart_psw.mask |= PSW_ASC_HOME;
 	lc->external_new_psw.mask = psw_kernel_bits;
 	lc->external_new_psw.addr =
diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index e9d94f61d500..86a74c9c9e63 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -32,32 +32,6 @@
 #include <asm/uaccess.h>
 #include "entry.h"
 
-/* common code for old and new mmaps */
-static inline long do_mmap2(
-	unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long pgoff)
-{
-	long error = -EBADF;
-	struct file * file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
 /*
  * Perform the select(nd, in, out, ex, tv) and mmap() system
  * calls. Linux for S/390 isn't able to handle more than 5
@@ -81,7 +55,7 @@ SYSCALL_DEFINE1(mmap2, struct mmap_arg_struct __user *, arg)
 
 	if (copy_from_user(&a, arg, sizeof(a)))
 		goto out;
-	error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
+	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
 out:
 	return error;
 }
@@ -98,7 +72,7 @@ SYSCALL_DEFINE1(s390_old_mmap, struct mmap_arg_struct __user *, arg)
 	if (a.offset & ~PAGE_MASK)
 		goto out;
 
-	error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
+	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
 out:
 	return error;
 }
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 34162a0b2caa..65065ac48ed3 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -214,7 +214,8 @@ struct clocksource * __init clocksource_default_clock(void)
 	return &clocksource_tod;
 }
 
-void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
+void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
+		     u32 mult)
 {
 	if (clock != &clocksource_tod)
 		return;
@@ -334,7 +335,7 @@ int get_sync_clock(unsigned long long *clock)
 	sw0 = atomic_read(sw_ptr);
 	*clock = get_clock();
 	sw1 = atomic_read(sw_ptr);
-	put_cpu_var(clock_sync_sync);
+	put_cpu_var(clock_sync_word);
 	if (sw0 == sw1 && (sw0 & 0x80000000U))
 		/* Success: time is in sync. */
 		return 0;
@@ -384,7 +385,7 @@ static inline int check_sync_clock(void)
 
 	sw_ptr = &get_cpu_var(clock_sync_word);
 	rc = (atomic_read(sw_ptr) & 0x80000000U) != 0;
-	put_cpu_var(clock_sync_sync);
+	put_cpu_var(clock_sync_word);
 	return rc;
 }
 
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index adfb32aa6d59..5f99e66c51c3 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -86,7 +86,8 @@ static void vdso_init_data(struct vdso_data *vd)
 	unsigned int facility_list;
 
 	facility_list = stfl();
-	vd->ectg_available = switch_amode && (facility_list & 1);
+	vd->ectg_available =
+		user_mode != HOME_SPACE_MODE && (facility_list & 1);
 }
 
 #ifdef CONFIG_64BIT
@@ -114,7 +115,7 @@ int vdso_alloc_per_cpu(int cpu, struct _lowcore *lowcore)
 
 	lowcore->vdso_per_cpu_data = __LC_PASTE;
 
-	if (!switch_amode || !vdso_enabled)
+	if (user_mode == HOME_SPACE_MODE || !vdso_enabled)
 		return 0;
 
 	segment_table = __get_free_pages(GFP_KERNEL, SEGMENT_ORDER);
@@ -160,7 +161,7 @@ void vdso_free_per_cpu(int cpu, struct _lowcore *lowcore)
 	unsigned long segment_table, page_table, page_frame;
 	u32 *psal, *aste;
 
-	if (!switch_amode || !vdso_enabled)
+	if (user_mode == HOME_SPACE_MODE || !vdso_enabled)
 		return;
 
 	psal = (u32 *)(addr_t) lowcore->paste[4];
@@ -184,7 +185,7 @@ static void __vdso_init_cr5(void *dummy)
 
 static void vdso_init_cr5(void)
 {
-	if (switch_amode && vdso_enabled)
+	if (user_mode != HOME_SPACE_MODE && vdso_enabled)
 		on_each_cpu(__vdso_init_cr5, NULL, 1);
 }
 #endif /* CONFIG_64BIT */
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index c41bb0d416e1..b59a812a010e 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -167,6 +167,8 @@ void vtime_stop_cpu(void)
 	/* Wait for external, I/O or machine check interrupt. */
 	psw.mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_IO | PSW_MASK_EXT;
 
+	idle->nohz_delay = 0;
+
 	/* Check if the CPU timer needs to be reprogrammed. */
 	if (vq->do_spt) {
 		__u64 vmax = VTIMER_MAX_SLICE;
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index bf164fc21864..6ee55ae84ce2 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -20,7 +20,6 @@ config KVM
 	depends on HAVE_KVM && EXPERIMENTAL
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
-	select S390_SWITCH_AMODE
 	---help---
 	  Support hosting paravirtualized guest machines using the SIE
 	  virtualization capability on the mainframe. This should work
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 07ced89740d7..f8bcaefd7d34 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -74,9 +74,10 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 static unsigned long long *facilities;
 
 /* Section: not file related */
-void kvm_arch_hardware_enable(void *garbage)
+int kvm_arch_hardware_enable(void *garbage)
 {
 	/* every s390 is virtualization enabled ;-) */
+	return 0;
 }
 
 void kvm_arch_hardware_disable(void *garbage)
@@ -116,10 +117,16 @@ long kvm_arch_dev_ioctl(struct file *filp,
 
 int kvm_dev_ioctl_check_extension(long ext)
 {
+	int r;
+
 	switch (ext) {
+	case KVM_CAP_S390_PSW:
+		r = 1;
+		break;
 	default:
-		return 0;
+		r = 0;
 	}
+	return r;
 }
 
 /* Section: vm related */
@@ -150,7 +157,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		break;
 	}
 	default:
-		r = -EINVAL;
+		r = -ENOTTY;
 	}
 
 	return r;
@@ -419,8 +426,10 @@ static int kvm_arch_vcpu_ioctl_set_initial_psw(struct kvm_vcpu *vcpu, psw_t psw)
 	vcpu_load(vcpu);
 	if (atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_RUNNING)
 		rc = -EBUSY;
-	else
-		vcpu->arch.sie_block->gpsw = psw;
+	else {
+		vcpu->run->psw_mask = psw.mask;
+		vcpu->run->psw_addr = psw.addr;
+	}
 	vcpu_put(vcpu);
 	return rc;
 }
@@ -508,9 +517,6 @@ rerun_vcpu:
 
 	switch (kvm_run->exit_reason) {
 	case KVM_EXIT_S390_SIEIC:
-		vcpu->arch.sie_block->gpsw.mask = kvm_run->s390_sieic.mask;
-		vcpu->arch.sie_block->gpsw.addr = kvm_run->s390_sieic.addr;
-		break;
 	case KVM_EXIT_UNKNOWN:
 	case KVM_EXIT_INTR:
 	case KVM_EXIT_S390_RESET:
@@ -519,6 +525,9 @@ rerun_vcpu:
 		BUG();
 	}
 
+	vcpu->arch.sie_block->gpsw.mask = kvm_run->psw_mask;
+	vcpu->arch.sie_block->gpsw.addr = kvm_run->psw_addr;
+
 	might_fault();
 
 	do {
@@ -538,8 +547,6 @@ rerun_vcpu:
 		/* intercept cannot be handled in-kernel, prepare kvm-run */
 		kvm_run->exit_reason         = KVM_EXIT_S390_SIEIC;
 		kvm_run->s390_sieic.icptcode = vcpu->arch.sie_block->icptcode;
-		kvm_run->s390_sieic.mask     = vcpu->arch.sie_block->gpsw.mask;
-		kvm_run->s390_sieic.addr     = vcpu->arch.sie_block->gpsw.addr;
 		kvm_run->s390_sieic.ipa      = vcpu->arch.sie_block->ipa;
 		kvm_run->s390_sieic.ipb      = vcpu->arch.sie_block->ipb;
 		rc = 0;
@@ -551,6 +558,9 @@ rerun_vcpu:
 		rc = 0;
 	}
 
+	kvm_run->psw_mask     = vcpu->arch.sie_block->gpsw.mask;
+	kvm_run->psw_addr     = vcpu->arch.sie_block->gpsw.addr;
+
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
 
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 40c8c6748cfe..15ee1111de58 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -188,9 +188,9 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
 
 	/* make sure that the new value is valid memory */
 	address = address & 0x7fffe000u;
-	if ((copy_from_guest(vcpu, &tmp,
-		(u64) (address + vcpu->arch.sie_block->gmsor) , 1)) ||
-	   (copy_from_guest(vcpu, &tmp, (u64) (address +
+	if ((copy_from_user(&tmp, (void __user *)
+		(address + vcpu->arch.sie_block->gmsor) , 1)) ||
+	   (copy_from_user(&tmp, (void __user *)(address +
 			vcpu->arch.sie_block->gmsor + PAGE_SIZE), 1))) {
 		*reg |= SIGP_STAT_INVALID_PARAMETER;
 		return 1; /* invalid parameter */
diff --git a/arch/s390/lib/uaccess_mvcos.c b/arch/s390/lib/uaccess_mvcos.c
index 58da3f461214..60455f104ea3 100644
--- a/arch/s390/lib/uaccess_mvcos.c
+++ b/arch/s390/lib/uaccess_mvcos.c
@@ -162,7 +162,6 @@ static size_t clear_user_mvcos(size_t size, void __user *to)
 	return size;
 }
 
-#ifdef CONFIG_S390_SWITCH_AMODE
 static size_t strnlen_user_mvcos(size_t count, const char __user *src)
 {
 	char buf[256];
@@ -200,7 +199,6 @@ static size_t strncpy_from_user_mvcos(size_t count, const char __user *src,
 	} while ((len_str == len) && (done < count));
 	return done;
 }
-#endif /* CONFIG_S390_SWITCH_AMODE */
 
 struct uaccess_ops uaccess_mvcos = {
 	.copy_from_user = copy_from_user_mvcos_check,
@@ -215,7 +213,6 @@ struct uaccess_ops uaccess_mvcos = {
 	.futex_atomic_cmpxchg = futex_atomic_cmpxchg_std,
 };
 
-#ifdef CONFIG_S390_SWITCH_AMODE
 struct uaccess_ops uaccess_mvcos_switch = {
 	.copy_from_user = copy_from_user_mvcos,
 	.copy_from_user_small = copy_from_user_mvcos,
@@ -228,4 +225,3 @@ struct uaccess_ops uaccess_mvcos_switch = {
 	.futex_atomic_op = futex_atomic_op_pt,
 	.futex_atomic_cmpxchg = futex_atomic_cmpxchg_pt,
 };
-#endif
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index cb5d59eab0ee..404f2de296dc 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -23,86 +23,21 @@ static inline pte_t *follow_table(struct mm_struct *mm, unsigned long addr)
 
 	pgd = pgd_offset(mm, addr);
 	if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
-		return NULL;
+		return (pte_t *) 0x3a;
 
 	pud = pud_offset(pgd, addr);
 	if (pud_none(*pud) || unlikely(pud_bad(*pud)))
-		return NULL;
+		return (pte_t *) 0x3b;
 
 	pmd = pmd_offset(pud, addr);
 	if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
-		return NULL;
+		return (pte_t *) 0x10;
 
 	return pte_offset_map(pmd, addr);
 }
 
-static int __handle_fault(struct mm_struct *mm, unsigned long address,
-			  int write_access)
-{
-	struct vm_area_struct *vma;
-	int ret = -EFAULT;
-	int fault;
-
-	if (in_atomic())
-		return ret;
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, address);
-	if (unlikely(!vma))
-		goto out;
-	if (unlikely(vma->vm_start > address)) {
-		if (!(vma->vm_flags & VM_GROWSDOWN))
-			goto out;
-		if (expand_stack(vma, address))
-			goto out;
-	}
-
-	if (!write_access) {
-		/* page not present, check vm flags */
-		if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
-			goto out;
-	} else {
-		if (!(vma->vm_flags & VM_WRITE))
-			goto out;
-	}
-
-survive:
-	fault = handle_mm_fault(mm, vma, address, write_access ? FAULT_FLAG_WRITE : 0);
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGBUS)
-			goto out_sigbus;
-		BUG();
-	}
-	if (fault & VM_FAULT_MAJOR)
-		current->maj_flt++;
-	else
-		current->min_flt++;
-	ret = 0;
-out:
-	up_read(&mm->mmap_sem);
-	return ret;
-
-out_of_memory:
-	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", current->comm);
-	return ret;
-
-out_sigbus:
-	up_read(&mm->mmap_sem);
-	current->thread.prot_addr = address;
-	current->thread.trap_no = 0x11;
-	force_sig(SIGBUS, current);
-	return ret;
-}
-
-static size_t __user_copy_pt(unsigned long uaddr, void *kptr,
-			     size_t n, int write_user)
+static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr,
+					     size_t n, int write_user)
 {
 	struct mm_struct *mm = current->mm;
 	unsigned long offset, pfn, done, size;
@@ -114,12 +49,17 @@ retry:
 	spin_lock(&mm->page_table_lock);
 	do {
 		pte = follow_table(mm, uaddr);
-		if (!pte || !pte_present(*pte) ||
-		    (write_user && !pte_write(*pte)))
+		if ((unsigned long) pte < 0x1000)
 			goto fault;
+		if (!pte_present(*pte)) {
+			pte = (pte_t *) 0x11;
+			goto fault;
+		} else if (write_user && !pte_write(*pte)) {
+			pte = (pte_t *) 0x04;
+			goto fault;
+		}
 
 		pfn = pte_pfn(*pte);
-
 		offset = uaddr & (PAGE_SIZE - 1);
 		size = min(n - done, PAGE_SIZE - offset);
 		if (write_user) {
@@ -137,7 +77,7 @@ retry:
 	return n - done;
 fault:
 	spin_unlock(&mm->page_table_lock);
-	if (__handle_fault(mm, uaddr, write_user))
+	if (__handle_fault(uaddr, (unsigned long) pte, write_user))
 		return n - done;
 	goto retry;
 }
@@ -146,30 +86,31 @@ fault:
  * Do DAT for user address by page table walk, return kernel address.
  * This function needs to be called with current->mm->page_table_lock held.
  */
-static unsigned long __dat_user_addr(unsigned long uaddr)
+static __always_inline unsigned long __dat_user_addr(unsigned long uaddr)
 {
 	struct mm_struct *mm = current->mm;
-	unsigned long pfn, ret;
+	unsigned long pfn;
 	pte_t *pte;
 	int rc;
 
-	ret = 0;
 retry:
 	pte = follow_table(mm, uaddr);
-	if (!pte || !pte_present(*pte))
+	if ((unsigned long) pte < 0x1000)
 		goto fault;
+	if (!pte_present(*pte)) {
+		pte = (pte_t *) 0x11;
+		goto fault;
+	}
 
 	pfn = pte_pfn(*pte);
-	ret = (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1));
-out:
-	return ret;
+	return (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1));
 fault:
 	spin_unlock(&mm->page_table_lock);
-	rc = __handle_fault(mm, uaddr, 0);
+	rc = __handle_fault(uaddr, (unsigned long) pte, 0);
 	spin_lock(&mm->page_table_lock);
-	if (rc)
-		goto out;
-	goto retry;
+	if (!rc)
+		goto retry;
+	return 0;
 }
 
 size_t copy_from_user_pt(size_t n, const void __user *from, void *to)
@@ -234,8 +175,12 @@ retry:
 	spin_lock(&mm->page_table_lock);
 	do {
 		pte = follow_table(mm, uaddr);
-		if (!pte || !pte_present(*pte))
+		if ((unsigned long) pte < 0x1000)
+			goto fault;
+		if (!pte_present(*pte)) {
+			pte = (pte_t *) 0x11;
 			goto fault;
+		}
 
 		pfn = pte_pfn(*pte);
 		offset = uaddr & (PAGE_SIZE-1);
@@ -249,9 +194,8 @@ retry:
 	return done + 1;
 fault:
 	spin_unlock(&mm->page_table_lock);
-	if (__handle_fault(mm, uaddr, 0)) {
+	if (__handle_fault(uaddr, (unsigned long) pte, 0))
 		return 0;
-	}
 	goto retry;
 }
 
@@ -284,7 +228,7 @@ static size_t copy_in_user_pt(size_t n, void __user *to,
 {
 	struct mm_struct *mm = current->mm;
 	unsigned long offset_from, offset_to, offset_max, pfn_from, pfn_to,
-		      uaddr, done, size;
+		      uaddr, done, size, error_code;
 	unsigned long uaddr_from = (unsigned long) from;
 	unsigned long uaddr_to = (unsigned long) to;
 	pte_t *pte_from, *pte_to;
@@ -298,17 +242,28 @@ static size_t copy_in_user_pt(size_t n, void __user *to,
 retry:
 	spin_lock(&mm->page_table_lock);
 	do {
+		write_user = 0;
+		uaddr = uaddr_from;
 		pte_from = follow_table(mm, uaddr_from);
-		if (!pte_from || !pte_present(*pte_from)) {
-			uaddr = uaddr_from;
-			write_user = 0;
+		error_code = (unsigned long) pte_from;
+		if (error_code < 0x1000)
+			goto fault;
+		if (!pte_present(*pte_from)) {
+			error_code = 0x11;
 			goto fault;
 		}
 
+		write_user = 1;
+		uaddr = uaddr_to;
 		pte_to = follow_table(mm, uaddr_to);
-		if (!pte_to || !pte_present(*pte_to) || !pte_write(*pte_to)) {
-			uaddr = uaddr_to;
-			write_user = 1;
+		error_code = (unsigned long) pte_to;
+		if (error_code < 0x1000)
+			goto fault;
+		if (!pte_present(*pte_to)) {
+			error_code = 0x11;
+			goto fault;
+		} else if (!pte_write(*pte_to)) {
+			error_code = 0x04;
 			goto fault;
 		}
 
@@ -329,7 +284,7 @@ retry:
 	return n - done;
 fault:
 	spin_unlock(&mm->page_table_lock);
-	if (__handle_fault(mm, uaddr, write_user))
+	if (__handle_fault(uaddr, error_code, write_user))
 		return n - done;
 	goto retry;
 }
diff --git a/arch/s390/math-emu/math.c b/arch/s390/math-emu/math.c
index 3ee78ccb617d..cd4e9c168dd7 100644
--- a/arch/s390/math-emu/math.c
+++ b/arch/s390/math-emu/math.c
@@ -2088,7 +2088,7 @@ int math_emu_ldr(__u8 *opcode) {
         __u16 opc = *((__u16 *) opcode);
 
         if ((opc & 0x90) == 0) {           /* test if rx in {0,2,4,6} */
-                /* we got an exception therfore ry can't be in {0,2,4,6} */
+                /* we got an exception therefore ry can't be in {0,2,4,6} */
 		asm volatile(		/* load rx from fp_regs.fprs[ry] */
 			"	bras	1,0f\n"
 			"	ld	0,0(%1)\n"
@@ -2118,7 +2118,7 @@ int math_emu_ler(__u8 *opcode) {
         __u16 opc = *((__u16 *) opcode);
 
         if ((opc & 0x90) == 0) {           /* test if rx in {0,2,4,6} */
-                /* we got an exception therfore ry can't be in {0,2,4,6} */
+                /* we got an exception therefore ry can't be in {0,2,4,6} */
 		asm volatile(		/* load rx from fp_regs.fprs[ry] */
 			"	bras	1,0f\n"
 			"	le	0,0(%1)\n"
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index b201135cc18c..76a3637b88e0 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -18,6 +18,7 @@
 #include <linux/swap.h>
 #include <linux/kthread.h>
 #include <linux/oom.h>
+#include <linux/suspend.h>
 
 #include <asm/pgalloc.h>
 #include <asm/uaccess.h>
@@ -44,6 +45,7 @@ static volatile long cmm_pages_target;
 static volatile long cmm_timed_pages_target;
 static long cmm_timeout_pages;
 static long cmm_timeout_seconds;
+static int cmm_suspended;
 
 static struct cmm_page_array *cmm_page_list;
 static struct cmm_page_array *cmm_timed_page_list;
@@ -147,9 +149,9 @@ cmm_thread(void *dummy)
 
 	while (1) {
 		rc = wait_event_interruptible(cmm_thread_wait,
-			(cmm_pages != cmm_pages_target ||
-			 cmm_timed_pages != cmm_timed_pages_target ||
-			 kthread_should_stop()));
+			(!cmm_suspended && (cmm_pages != cmm_pages_target ||
+			 cmm_timed_pages != cmm_timed_pages_target)) ||
+			 kthread_should_stop());
 		if (kthread_should_stop() || rc == -ERESTARTSYS) {
 			cmm_pages_target = cmm_pages;
 			cmm_timed_pages_target = cmm_timed_pages;
@@ -343,30 +345,29 @@ static struct ctl_table cmm_table[] = {
 	{
 		.procname	= "cmm_pages",
 		.mode		= 0644,
-		.proc_handler	= &cmm_pages_handler,
+		.proc_handler	= cmm_pages_handler,
 	},
 	{
 		.procname	= "cmm_timed_pages",
 		.mode		= 0644,
-		.proc_handler	= &cmm_pages_handler,
+		.proc_handler	= cmm_pages_handler,
 	},
 	{
 		.procname	= "cmm_timeout",
 		.mode		= 0644,
-		.proc_handler	= &cmm_timeout_handler,
+		.proc_handler	= cmm_timeout_handler,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table cmm_dir_table[] = {
 	{
-		.ctl_name	= CTL_VM,
 		.procname	= "vm",
 		.maxlen		= 0,
 		.mode		= 0555,
 		.child		= cmm_table,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 #endif
 
@@ -411,6 +412,38 @@ cmm_smsg_target(char *from, char *msg)
 
 static struct ctl_table_header *cmm_sysctl_header;
 
+static int cmm_suspend(void)
+{
+	cmm_suspended = 1;
+	cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list);
+	cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list);
+	return 0;
+}
+
+static int cmm_resume(void)
+{
+	cmm_suspended = 0;
+	cmm_kick_thread();
+	return 0;
+}
+
+static int cmm_power_event(struct notifier_block *this,
+			   unsigned long event, void *ptr)
+{
+	switch (event) {
+	case PM_POST_HIBERNATION:
+		return cmm_resume();
+	case PM_HIBERNATION_PREPARE:
+		return cmm_suspend();
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+static struct notifier_block cmm_power_notifier = {
+	.notifier_call = cmm_power_event,
+};
+
 static int
 cmm_init (void)
 {
@@ -419,7 +452,7 @@ cmm_init (void)
 #ifdef CONFIG_CMM_PROC
 	cmm_sysctl_header = register_sysctl_table(cmm_dir_table);
 	if (!cmm_sysctl_header)
-		goto out;
+		goto out_sysctl;
 #endif
 #ifdef CONFIG_CMM_IUCV
 	rc = smsg_register_callback(SMSG_PREFIX, cmm_smsg_target);
@@ -429,17 +462,21 @@ cmm_init (void)
 	rc = register_oom_notifier(&cmm_oom_nb);
 	if (rc < 0)
 		goto out_oom_notify;
+	rc = register_pm_notifier(&cmm_power_notifier);
+	if (rc)
+		goto out_pm;
 	init_waitqueue_head(&cmm_thread_wait);
 	init_timer(&cmm_timer);
 	cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
 	rc = IS_ERR(cmm_thread_ptr) ? PTR_ERR(cmm_thread_ptr) : 0;
-	if (!rc)
-		goto out;
-	/*
-	 * kthread_create failed. undo all the stuff from above again.
-	 */
-	unregister_oom_notifier(&cmm_oom_nb);
+	if (rc)
+		goto out_kthread;
+	return 0;
 
+out_kthread:
+	unregister_pm_notifier(&cmm_power_notifier);
+out_pm:
+	unregister_oom_notifier(&cmm_oom_nb);
 out_oom_notify:
 #ifdef CONFIG_CMM_IUCV
 	smsg_unregister_callback(SMSG_PREFIX, cmm_smsg_target);
@@ -447,8 +484,8 @@ out_smsg:
 #endif
 #ifdef CONFIG_CMM_PROC
 	unregister_sysctl_table(cmm_sysctl_header);
+out_sysctl:
 #endif
-out:
 	return rc;
 }
 
@@ -456,6 +493,7 @@ static void
 cmm_exit(void)
 {
 	kthread_stop(cmm_thread_ptr);
+	unregister_pm_notifier(&cmm_power_notifier);
 	unregister_oom_notifier(&cmm_oom_nb);
 	cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list);
 	cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list);
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 6d507462967a..fc102e70d9c2 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -34,16 +34,15 @@
 #include <asm/pgtable.h>
 #include <asm/s390_ext.h>
 #include <asm/mmu_context.h>
+#include <asm/compat.h>
 #include "../kernel/entry.h"
 
 #ifndef CONFIG_64BIT
 #define __FAIL_ADDR_MASK 0x7ffff000
-#define __FIXUP_MASK 0x7fffffff
 #define __SUBCODE_MASK 0x0200
 #define __PF_RES_FIELD 0ULL
 #else /* CONFIG_64BIT */
 #define __FAIL_ADDR_MASK -4096L
-#define __FIXUP_MASK ~0L
 #define __SUBCODE_MASK 0x0600
 #define __PF_RES_FIELD 0x8000000000000000ULL
 #endif /* CONFIG_64BIT */
@@ -52,11 +51,15 @@
 extern int sysctl_userprocess_debug;
 #endif
 
-#ifdef CONFIG_KPROBES
-static inline int notify_page_fault(struct pt_regs *regs, long err)
+#define VM_FAULT_BADCONTEXT	0x010000
+#define VM_FAULT_BADMAP		0x020000
+#define VM_FAULT_BADACCESS	0x040000
+
+static inline int notify_page_fault(struct pt_regs *regs)
 {
 	int ret = 0;
 
+#ifdef CONFIG_KPROBES
 	/* kprobe_running() needs smp_processor_id() */
 	if (!user_mode(regs)) {
 		preempt_disable();
@@ -64,15 +67,9 @@ static inline int notify_page_fault(struct pt_regs *regs, long err)
 			ret = 1;
 		preempt_enable();
 	}
-
+#endif
 	return ret;
 }
-#else
-static inline int notify_page_fault(struct pt_regs *regs, long err)
-{
-	return 0;
-}
-#endif
 
 
 /*
@@ -100,57 +97,50 @@ void bust_spinlocks(int yes)
 
 /*
  * Returns the address space associated with the fault.
- * Returns 0 for kernel space, 1 for user space and
- * 2 for code execution in user space with noexec=on.
+ * Returns 0 for kernel space and 1 for user space.
  */
-static inline int check_space(struct task_struct *tsk)
+static inline int user_space_fault(unsigned long trans_exc_code)
 {
 	/*
-	 * The lowest two bits of S390_lowcore.trans_exc_code
-	 * indicate which paging table was used.
+	 * The lowest two bits of the translation exception
+	 * identification indicate which paging table was used.
 	 */
-	int desc = S390_lowcore.trans_exc_code & 3;
-
-	if (desc == 3)	/* Home Segment Table Descriptor */
-		return switch_amode == 0;
-	if (desc == 2)	/* Secondary Segment Table Descriptor */
-		return tsk->thread.mm_segment.ar4;
-#ifdef CONFIG_S390_SWITCH_AMODE
-	if (unlikely(desc == 1)) { /* STD determined via access register */
-		/* %a0 always indicates primary space. */
-		if (S390_lowcore.exc_access_id != 0) {
-			save_access_regs(tsk->thread.acrs);
-			/*
-			 * An alet of 0 indicates primary space.
-			 * An alet of 1 indicates secondary space.
-			 * Any other alet values generate an
-			 * alen-translation exception.
-			 */
-			if (tsk->thread.acrs[S390_lowcore.exc_access_id])
-				return tsk->thread.mm_segment.ar4;
-		}
-	}
-#endif
-	/* Primary Segment Table Descriptor */
-	return switch_amode << s390_noexec;
+	trans_exc_code &= 3;
+	if (trans_exc_code == 2)
+		/* Access via secondary space, set_fs setting decides */
+		return current->thread.mm_segment.ar4;
+	if (user_mode == HOME_SPACE_MODE)
+		/* User space if the access has been done via home space. */
+		return trans_exc_code == 3;
+	/*
+	 * If the user space is not the home space the kernel runs in home
+	 * space. Access via secondary space has already been covered,
+	 * access via primary space or access register is from user space
+	 * and access via home space is from the kernel.
+	 */
+	return trans_exc_code != 3;
 }
 
 /*
  * Send SIGSEGV to task.  This is an external routine
  * to keep the stack usage of do_page_fault small.
  */
-static void do_sigsegv(struct pt_regs *regs, unsigned long error_code,
-		       int si_code, unsigned long address)
+static noinline void do_sigsegv(struct pt_regs *regs, long int_code,
+				int si_code, unsigned long trans_exc_code)
 {
 	struct siginfo si;
+	unsigned long address;
 
+	address = trans_exc_code & __FAIL_ADDR_MASK;
+	current->thread.prot_addr = address;
+	current->thread.trap_no = int_code;
 #if defined(CONFIG_SYSCTL) || defined(CONFIG_PROCESS_DEBUG)
 #if defined(CONFIG_SYSCTL)
 	if (sysctl_userprocess_debug)
 #endif
 	{
 		printk("User process fault: interruption code 0x%lX\n",
-		       error_code);
+		       int_code);
 		printk("failing address: %lX\n", address);
 		show_regs(regs);
 	}
@@ -161,13 +151,14 @@ static void do_sigsegv(struct pt_regs *regs, unsigned long error_code,
 	force_sig_info(SIGSEGV, &si, current);
 }
 
-static void do_no_context(struct pt_regs *regs, unsigned long error_code,
-			  unsigned long address)
+static noinline void do_no_context(struct pt_regs *regs, long int_code,
+				   unsigned long trans_exc_code)
 {
 	const struct exception_table_entry *fixup;
+	unsigned long address;
 
 	/* Are we prepared to handle this kernel fault?  */
-	fixup = search_exception_tables(regs->psw.addr & __FIXUP_MASK);
+	fixup = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN);
 	if (fixup) {
 		regs->psw.addr = fixup->fixup | PSW_ADDR_AMODE;
 		return;
@@ -177,129 +168,149 @@ static void do_no_context(struct pt_regs *regs, unsigned long error_code,
 	 * Oops. The kernel tried to access some bad page. We'll have to
 	 * terminate things with extreme prejudice.
 	 */
-	if (check_space(current) == 0)
+	address = trans_exc_code & __FAIL_ADDR_MASK;
+	if (!user_space_fault(trans_exc_code))
 		printk(KERN_ALERT "Unable to handle kernel pointer dereference"
 		       " at virtual kernel address %p\n", (void *)address);
 	else
 		printk(KERN_ALERT "Unable to handle kernel paging request"
 		       " at virtual user address %p\n", (void *)address);
 
-	die("Oops", regs, error_code);
+	die("Oops", regs, int_code);
 	do_exit(SIGKILL);
 }
 
-static void do_low_address(struct pt_regs *regs, unsigned long error_code)
+static noinline void do_low_address(struct pt_regs *regs, long int_code,
+				    unsigned long trans_exc_code)
 {
 	/* Low-address protection hit in kernel mode means
 	   NULL pointer write access in kernel mode.  */
 	if (regs->psw.mask & PSW_MASK_PSTATE) {
 		/* Low-address protection hit in user mode 'cannot happen'. */
-		die ("Low-address protection", regs, error_code);
+		die ("Low-address protection", regs, int_code);
 		do_exit(SIGKILL);
 	}
 
-	do_no_context(regs, error_code, 0);
+	do_no_context(regs, int_code, trans_exc_code);
 }
 
-static void do_sigbus(struct pt_regs *regs, unsigned long error_code,
-		      unsigned long address)
+static noinline void do_sigbus(struct pt_regs *regs, long int_code,
+			       unsigned long trans_exc_code)
 {
 	struct task_struct *tsk = current;
-	struct mm_struct *mm = tsk->mm;
 
-	up_read(&mm->mmap_sem);
 	/*
 	 * Send a sigbus, regardless of whether we were in kernel
 	 * or user mode.
 	 */
-	tsk->thread.prot_addr = address;
-	tsk->thread.trap_no = error_code;
+	tsk->thread.prot_addr = trans_exc_code & __FAIL_ADDR_MASK;
+	tsk->thread.trap_no = int_code;
 	force_sig(SIGBUS, tsk);
-
-	/* Kernel mode? Handle exceptions or die */
-	if (!(regs->psw.mask & PSW_MASK_PSTATE))
-		do_no_context(regs, error_code, address);
 }
 
 #ifdef CONFIG_S390_EXEC_PROTECT
-static int signal_return(struct mm_struct *mm, struct pt_regs *regs,
-			 unsigned long address, unsigned long error_code)
+static noinline int signal_return(struct pt_regs *regs, long int_code,
+				  unsigned long trans_exc_code)
 {
 	u16 instruction;
 	int rc;
-#ifdef CONFIG_COMPAT
-	int compat;
-#endif
 
-	pagefault_disable();
 	rc = __get_user(instruction, (u16 __user *) regs->psw.addr);
-	pagefault_enable();
-	if (rc)
-		return -EFAULT;
 
-	up_read(&mm->mmap_sem);
-	clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
-#ifdef CONFIG_COMPAT
-	compat = is_compat_task();
-	if (compat && instruction == 0x0a77)
-		sys32_sigreturn();
-	else if (compat && instruction == 0x0aad)
-		sys32_rt_sigreturn();
-	else
-#endif
-	if (instruction == 0x0a77)
-		sys_sigreturn();
-	else if (instruction == 0x0aad)
-		sys_rt_sigreturn();
-	else {
-		current->thread.prot_addr = address;
-		current->thread.trap_no = error_code;
-		do_sigsegv(regs, error_code, SEGV_MAPERR, address);
-	}
+	if (!rc && instruction == 0x0a77) {
+		clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
+		if (is_compat_task())
+			sys32_sigreturn();
+		else
+			sys_sigreturn();
+	} else if (!rc && instruction == 0x0aad) {
+		clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
+		if (is_compat_task())
+			sys32_rt_sigreturn();
+		else
+			sys_rt_sigreturn();
+	} else
+		do_sigsegv(regs, int_code, SEGV_MAPERR, trans_exc_code);
 	return 0;
 }
 #endif /* CONFIG_S390_EXEC_PROTECT */
 
+static noinline void do_fault_error(struct pt_regs *regs, long int_code,
+				    unsigned long trans_exc_code, int fault)
+{
+	int si_code;
+
+	switch (fault) {
+	case VM_FAULT_BADACCESS:
+#ifdef CONFIG_S390_EXEC_PROTECT
+		if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_SECONDARY &&
+		    (trans_exc_code & 3) == 0) {
+			signal_return(regs, int_code, trans_exc_code);
+			break;
+		}
+#endif /* CONFIG_S390_EXEC_PROTECT */
+	case VM_FAULT_BADMAP:
+		/* Bad memory access. Check if it is kernel or user space. */
+		if (regs->psw.mask & PSW_MASK_PSTATE) {
+			/* User mode accesses just cause a SIGSEGV */
+			si_code = (fault == VM_FAULT_BADMAP) ?
+				SEGV_MAPERR : SEGV_ACCERR;
+			do_sigsegv(regs, int_code, si_code, trans_exc_code);
+			return;
+		}
+	case VM_FAULT_BADCONTEXT:
+		do_no_context(regs, int_code, trans_exc_code);
+		break;
+	default: /* fault & VM_FAULT_ERROR */
+		if (fault & VM_FAULT_OOM)
+			pagefault_out_of_memory();
+		else if (fault & VM_FAULT_SIGBUS) {
+			do_sigbus(regs, int_code, trans_exc_code);
+			/* Kernel mode? Handle exceptions or die */
+			if (!(regs->psw.mask & PSW_MASK_PSTATE))
+				do_no_context(regs, int_code, trans_exc_code);
+		} else
+			BUG();
+		break;
+	}
+}
+
 /*
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
  * routines.
  *
- * error_code:
+ * interruption code (int_code):
  *   04       Protection           ->  Write-Protection  (suprression)
  *   10       Segment translation  ->  Not present       (nullification)
  *   11       Page translation     ->  Not present       (nullification)
  *   3b       Region third trans.  ->  Not present       (nullification)
  */
-static inline void
-do_exception(struct pt_regs *regs, unsigned long error_code, int write)
+static inline int do_exception(struct pt_regs *regs, int access,
+			       unsigned long trans_exc_code)
 {
 	struct task_struct *tsk;
 	struct mm_struct *mm;
 	struct vm_area_struct *vma;
 	unsigned long address;
-	int space;
-	int si_code;
 	int fault;
 
-	if (notify_page_fault(regs, error_code))
-		return;
+	if (notify_page_fault(regs))
+		return 0;
 
 	tsk = current;
 	mm = tsk->mm;
 
-	/* get the failing address and the affected space */
-	address = S390_lowcore.trans_exc_code & __FAIL_ADDR_MASK;
-	space = check_space(tsk);
-
 	/*
 	 * Verify that the fault happened in user space, that
 	 * we are not in an interrupt and that there is a 
 	 * user context.
 	 */
-	if (unlikely(space == 0 || in_atomic() || !mm))
-		goto no_context;
+	fault = VM_FAULT_BADCONTEXT;
+	if (unlikely(!user_space_fault(trans_exc_code) || in_atomic() || !mm))
+		goto out;
 
+	address = trans_exc_code & __FAIL_ADDR_MASK;
 	/*
 	 * When we get here, the fault happened in the current
 	 * task's user address space, so we can switch on the
@@ -309,42 +320,26 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int write)
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 	down_read(&mm->mmap_sem);
 
-	si_code = SEGV_MAPERR;
+	fault = VM_FAULT_BADMAP;
 	vma = find_vma(mm, address);
 	if (!vma)
-		goto bad_area;
-
-#ifdef CONFIG_S390_EXEC_PROTECT
-	if (unlikely((space == 2) && !(vma->vm_flags & VM_EXEC)))
-		if (!signal_return(mm, regs, address, error_code))
-			/*
-			 * signal_return() has done an up_read(&mm->mmap_sem)
-			 * if it returns 0.
-			 */
-			return;
-#endif
+		goto out_up;
 
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (expand_stack(vma, address))
-		goto bad_area;
-/*
- * Ok, we have a good vm_area for this memory access, so
- * we can handle it..
- */
-good_area:
-	si_code = SEGV_ACCERR;
-	if (!write) {
-		/* page not present, check vm flags */
-		if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
-			goto bad_area;
-	} else {
-		if (!(vma->vm_flags & VM_WRITE))
-			goto bad_area;
+	if (unlikely(vma->vm_start > address)) {
+		if (!(vma->vm_flags & VM_GROWSDOWN))
+			goto out_up;
+		if (expand_stack(vma, address))
+			goto out_up;
 	}
 
+	/*
+	 * Ok, we have a good vm_area for this memory access, so
+	 * we can handle it..
+	 */
+	fault = VM_FAULT_BADACCESS;
+	if (unlikely(!(vma->vm_flags & access)))
+		goto out_up;
+
 	if (is_vm_hugetlb_page(vma))
 		address &= HPAGE_MASK;
 	/*
@@ -352,18 +347,11 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM) {
-			up_read(&mm->mmap_sem);
-			pagefault_out_of_memory();
-			return;
-		} else if (fault & VM_FAULT_SIGBUS) {
-			do_sigbus(regs, error_code, address);
-			return;
-		}
-		BUG();
-	}
+	fault = handle_mm_fault(mm, vma, address,
+				(access == VM_WRITE) ? FAULT_FLAG_WRITE : 0);
+	if (unlikely(fault & VM_FAULT_ERROR))
+		goto out_up;
+
 	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
 		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
@@ -373,74 +361,69 @@ good_area:
 		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
 				     regs, address);
 	}
-        up_read(&mm->mmap_sem);
 	/*
 	 * The instruction that caused the program check will
 	 * be repeated. Don't signal single step via SIGTRAP.
 	 */
 	clear_tsk_thread_flag(tsk, TIF_SINGLE_STEP);
-        return;
-
-/*
- * Something tried to access memory that isn't in our memory map..
- * Fix it, but check if it's kernel or user first..
- */
-bad_area:
+	fault = 0;
+out_up:
 	up_read(&mm->mmap_sem);
-
-	/* User mode accesses just cause a SIGSEGV */
-	if (regs->psw.mask & PSW_MASK_PSTATE) {
-		tsk->thread.prot_addr = address;
-		tsk->thread.trap_no = error_code;
-		do_sigsegv(regs, error_code, si_code, address);
-		return;
-	}
-
-no_context:
-	do_no_context(regs, error_code, address);
+out:
+	return fault;
 }
 
-void __kprobes do_protection_exception(struct pt_regs *regs,
-				       long error_code)
+void __kprobes do_protection_exception(struct pt_regs *regs, long int_code)
 {
+	unsigned long trans_exc_code = S390_lowcore.trans_exc_code;
+	int fault;
+
 	/* Protection exception is supressing, decrement psw address. */
-	regs->psw.addr -= (error_code >> 16);
+	regs->psw.addr -= (int_code >> 16);
 	/*
 	 * Check for low-address protection.  This needs to be treated
 	 * as a special case because the translation exception code
 	 * field is not guaranteed to contain valid data in this case.
 	 */
-	if (unlikely(!(S390_lowcore.trans_exc_code & 4))) {
-		do_low_address(regs, error_code);
+	if (unlikely(!(trans_exc_code & 4))) {
+		do_low_address(regs, int_code, trans_exc_code);
 		return;
 	}
-	do_exception(regs, 4, 1);
+	fault = do_exception(regs, VM_WRITE, trans_exc_code);
+	if (unlikely(fault))
+		do_fault_error(regs, 4, trans_exc_code, fault);
 }
 
-void __kprobes do_dat_exception(struct pt_regs *regs, long error_code)
+void __kprobes do_dat_exception(struct pt_regs *regs, long int_code)
 {
-	do_exception(regs, error_code & 0xff, 0);
+	unsigned long trans_exc_code = S390_lowcore.trans_exc_code;
+	int access, fault;
+
+	access = VM_READ | VM_EXEC | VM_WRITE;
+#ifdef CONFIG_S390_EXEC_PROTECT
+	if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_SECONDARY &&
+	    (trans_exc_code & 3) == 0)
+		access = VM_EXEC;
+#endif
+	fault = do_exception(regs, access, trans_exc_code);
+	if (unlikely(fault))
+		do_fault_error(regs, int_code & 255, trans_exc_code, fault);
 }
 
 #ifdef CONFIG_64BIT
-void __kprobes do_asce_exception(struct pt_regs *regs, unsigned long error_code)
+void __kprobes do_asce_exception(struct pt_regs *regs, long int_code)
 {
-	struct mm_struct *mm;
+	unsigned long trans_exc_code = S390_lowcore.trans_exc_code;
+	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
-	unsigned long address;
-	int space;
-
-	mm = current->mm;
-	address = S390_lowcore.trans_exc_code & __FAIL_ADDR_MASK;
-	space = check_space(current);
 
-	if (unlikely(space == 0 || in_atomic() || !mm))
+	if (unlikely(!user_space_fault(trans_exc_code) || in_atomic() || !mm))
 		goto no_context;
 
 	local_irq_enable();
 
 	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, address);
+	vma = find_vma(mm, trans_exc_code & __FAIL_ADDR_MASK);
 	up_read(&mm->mmap_sem);
 
 	if (vma) {
@@ -450,17 +433,38 @@ void __kprobes do_asce_exception(struct pt_regs *regs, unsigned long error_code)
 
 	/* User mode accesses just cause a SIGSEGV */
 	if (regs->psw.mask & PSW_MASK_PSTATE) {
-		current->thread.prot_addr = address;
-		current->thread.trap_no = error_code;
-		do_sigsegv(regs, error_code, SEGV_MAPERR, address);
+		do_sigsegv(regs, int_code, SEGV_MAPERR, trans_exc_code);
 		return;
 	}
 
 no_context:
-	do_no_context(regs, error_code, address);
+	do_no_context(regs, int_code, trans_exc_code);
 }
 #endif
 
+int __handle_fault(unsigned long uaddr, unsigned long int_code, int write_user)
+{
+	struct pt_regs regs;
+	int access, fault;
+
+	regs.psw.mask = psw_kernel_bits;
+	if (!irqs_disabled())
+		regs.psw.mask |= PSW_MASK_IO | PSW_MASK_EXT;
+	regs.psw.addr = (unsigned long) __builtin_return_address(0);
+	regs.psw.addr |= PSW_ADDR_AMODE;
+	uaddr &= PAGE_MASK;
+	access = write_user ? VM_WRITE : VM_READ;
+	fault = do_exception(&regs, access, uaddr | 2);
+	if (unlikely(fault)) {
+		if (fault & VM_FAULT_OOM) {
+			pagefault_out_of_memory();
+			fault = 0;
+		} else if (fault & VM_FAULT_SIGBUS)
+			do_sigbus(&regs, int_code, uaddr);
+	}
+	return fault ? -EFAULT : 0;
+}
+
 #ifdef CONFIG_PFAULT 
 /*
  * 'pfault' pseudo page faults routines.
@@ -522,7 +526,7 @@ void pfault_fini(void)
 		: : "a" (&refbk), "m" (refbk) : "cc");
 }
 
-static void pfault_interrupt(__u16 error_code)
+static void pfault_interrupt(__u16 int_code)
 {
 	struct task_struct *tsk;
 	__u16 subcode;
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 2757c5616a07..ad621e06ada3 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -269,7 +269,7 @@ int s390_enable_sie(void)
 	struct mm_struct *mm, *old_mm;
 
 	/* Do we have switched amode? If no, we cannot do sie */
-	if (!switch_amode)
+	if (user_mode == HOME_SPACE_MODE)
 		return -EINVAL;
 
 	/* Do we have pgstes? if yes, we are done */
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index 5f91a38d7592..300ab012b0fd 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -70,8 +70,12 @@ static pte_t __ref *vmem_pte_alloc(void)
 		pte = alloc_bootmem(PTRS_PER_PTE * sizeof(pte_t));
 	if (!pte)
 		return NULL;
-	clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY,
-		    PTRS_PER_PTE * sizeof(pte_t));
+	if (MACHINE_HAS_HPAGE)
+		clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY | _PAGE_CO,
+			    PTRS_PER_PTE * sizeof(pte_t));
+	else
+		clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY,
+			    PTRS_PER_PTE * sizeof(pte_t));
 	return pte;
 }
 
@@ -112,7 +116,8 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro)
 		if (MACHINE_HAS_HPAGE && !(address & ~HPAGE_MASK) &&
 		    (address + HPAGE_SIZE <= start + size) &&
 		    (address >= HPAGE_SIZE)) {
-			pte_val(pte) |= _SEGMENT_ENTRY_LARGE;
+			pte_val(pte) |= _SEGMENT_ENTRY_LARGE |
+					_SEGMENT_ENTRY_CO;
 			pmd_val(*pm_dir) = pte_val(pte);
 			address += HPAGE_SIZE - PAGE_SIZE;
 			continue;
diff --git a/arch/score/include/asm/cacheflush.h b/arch/score/include/asm/cacheflush.h
index 07cc8fc457cd..caaba24036e3 100644
--- a/arch/score/include/asm/cacheflush.h
+++ b/arch/score/include/asm/cacheflush.h
@@ -16,6 +16,7 @@ extern void flush_icache_range(unsigned long start, unsigned long end);
 extern void flush_dcache_range(unsigned long start, unsigned long end);
 
 #define flush_cache_dup_mm(mm)			do {} while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do {} while (0)
 #define flush_dcache_mmap_lock(mapping)		do {} while (0)
 #define flush_dcache_mmap_unlock(mapping)	do {} while (0)
diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c
index 001249469866..856ed68a58e6 100644
--- a/arch/score/kernel/sys_score.c
+++ b/arch/score/kernel/sys_score.c
@@ -36,34 +36,16 @@ asmlinkage long
 sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
 	  unsigned long flags, unsigned long fd, unsigned long pgoff)
 {
-	int error = -EBADF;
-	struct file *file = NULL;
-
-	if (pgoff & (~PAGE_MASK >> 12))
-		return -EINVAL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			return error;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-
-	return error;
+	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 }
 
 asmlinkage long
 sys_mmap(unsigned long addr, unsigned long len, unsigned long prot,
-	unsigned long flags, unsigned long fd, off_t pgoff)
+	unsigned long flags, unsigned long fd, off_t offset)
 {
-	return sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
+	if (unlikely(offset & ~PAGE_MASK))
+		return -EINVAL;
+	return sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
 }
 
 asmlinkage long
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 88cdeb9f72d9..0031a6979f3a 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -16,7 +16,9 @@ config SUPERH
 	select HAVE_IOREMAP_PROT if MMU
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
+	select HAVE_DMA_ATTRS
 	select HAVE_PERF_EVENTS
+	select PERF_USE_VMALLOC
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
@@ -37,6 +39,7 @@ config SUPERH32
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_ARCH_KGDB
 	select ARCH_HIBERNATION_POSSIBLE if MMU
@@ -170,6 +173,12 @@ config ARCH_HAS_CPU_IDLE_WAIT
 config IO_TRAPPED
 	bool
 
+config DMA_COHERENT
+	bool
+
+config DMA_NONCOHERENT
+	def_bool !DMA_COHERENT
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
@@ -220,6 +229,7 @@ config CPU_SHX2
 
 config CPU_SHX3
 	bool
+	select DMA_COHERENT
 
 config ARCH_SHMOBILE
 	bool
@@ -761,17 +771,6 @@ config ENTRY_OFFSET
 	default "0x00010000" if PAGE_SIZE_64KB
 	default "0x00000000"
 
-config UBC_WAKEUP
-	bool "Wakeup UBC on startup"
-	depends on CPU_SH4 && !CPU_SH4A
-	help
-	  Selecting this option will wakeup the User Break Controller (UBC) on
-	  startup. Although the UBC is left in an awake state when the processor
-	  comes up, some boot loaders misbehave by putting the UBC to sleep in a
-	  power saving state, which causes issues with things like ptrace().
-
-	  If unsure, say N.
-
 choice
 	prompt "Kernel command line"
 	optional
@@ -818,7 +817,13 @@ config MAPLE
 	 Dreamcast with a serial line terminal or a remote network
 	 connection.
 
-source "arch/sh/drivers/pci/Kconfig"
+config PCI
+	bool "PCI support"
+	depends on SYS_SUPPORTS_PCI
+	help
+	  Find out whether you have a PCI motherboard. PCI is the name of a
+	  bus system, i.e. the way the CPU talks to the other stuff inside
+	  your box. If you have PCI, say Y, otherwise N.
 
 source "drivers/pci/pcie/Kconfig"
 
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 66e40aabc600..ac17c5ac550e 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -78,6 +78,9 @@ defaultimage-$(CONFIG_SUPERH32)			:= zImage
 defaultimage-$(CONFIG_SH_SH7785LCR)		:= uImage
 defaultimage-$(CONFIG_SH_RSK)			:= uImage
 defaultimage-$(CONFIG_SH_URQUELL)		:= uImage
+defaultimage-$(CONFIG_SH_MIGOR)			:= uImage
+defaultimage-$(CONFIG_SH_AP325RXA)		:= uImage
+defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE)	:= uImage
 defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE)	:= vmlinux
 defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE)	:= vmlinux
 
@@ -136,6 +139,7 @@ machdir-$(CONFIG_SH_7751_SYSTEMH)		+= mach-systemh
 machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
 machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
+machdir-$(CONFIG_SH_AP325RXA)			+= mach-ap325rxa
 machdir-$(CONFIG_SH_KFR2R09)			+= mach-kfr2r09
 machdir-$(CONFIG_SH_ECOVEC)			+= mach-ecovec24
 machdir-$(CONFIG_SH_SDK7780)			+= mach-sdk7780
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index 7baa21090231..ce0f26381784 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -1,7 +1,6 @@
 #
 # Specific board support, not covered by a mach group.
 #
-obj-$(CONFIG_SH_AP325RXA)	+= board-ap325rxa.o
 obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
 obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
diff --git a/arch/sh/boards/mach-ap325rxa/Makefile b/arch/sh/boards/mach-ap325rxa/Makefile
new file mode 100644
index 000000000000..4cf1774d2613
--- /dev/null
+++ b/arch/sh/boards/mach-ap325rxa/Makefile
@@ -0,0 +1,2 @@
+obj-y	 := setup.o sdram.o
+
diff --git a/arch/sh/boards/mach-ap325rxa/sdram.S b/arch/sh/boards/mach-ap325rxa/sdram.S
new file mode 100644
index 000000000000..db24fbed4fca
--- /dev/null
+++ b/arch/sh/boards/mach-ap325rxa/sdram.S
@@ -0,0 +1,69 @@
+/*
+ * AP325RXA sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(ap325rxa_sdram_enter_start)
+
+	/* SBSC: disable power down and put in self-refresh mode */
+	mov.l	1f, r4
+	mov.l	2f, r1
+	mov.l	@r4, r2
+	or	r1, r2
+	mov.l   3f, r3
+	and	r3, r2
+	mov.l	r2, @r4
+
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+2:	.long	0x00000400
+3:	.long	0xffff7fff
+ENTRY(ap325rxa_sdram_enter_end)
+
+	.balign 4
+ENTRY(ap325rxa_sdram_leave_start)
+
+	/* SBSC: set auto-refresh mode */
+	mov.l	1f, r4
+	mov.l	@r4, r0
+	mov.l   4f, r1
+	and	r1, r0
+	mov.l	r0, @r4
+	mov.l	6f, r4
+	mov.l	8f, r0
+	mov.l	@r4, r1
+	mov	#-1, r4
+	add	r4, r1
+	or	r1, r0
+	mov.l	7f, r1
+	mov.l	r0, @r1
+
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+4:	.long	0xfffffbff
+6:	.long   0xfe40001c /* RTCOR */
+7:	.long   0xfe400018 /* RTCNT */
+8:	.long   0xa55a0000
+ENTRY(ap325rxa_sdram_leave_end)
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 2d080732a964..cf9dc12dfeb1 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -20,8 +20,6 @@
 #include <linux/i2c.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
 #include <media/ov772x.h>
 #include <media/soc_camera.h>
 #include <media/soc_camera_platform.h>
@@ -29,6 +27,7 @@
 #include <video/sh_mobile_lcdc.h>
 #include <asm/io.h>
 #include <asm/clock.h>
+#include <asm/suspend.h>
 #include <cpu/sh7723.h>
 
 static struct smsc911x_platform_config smsc911x_config = {
@@ -409,17 +408,49 @@ static struct platform_device ceu_device = {
 	},
 };
 
-struct spi_gpio_platform_data sdcard_cn3_platform_data = {
-	.sck = GPIO_PTD0,
-	.mosi = GPIO_PTD1,
-	.miso = GPIO_PTD2,
-	.num_chipselect = 1,
+static struct resource sdhi0_cn3_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start	= 0x04ce0000,
+		.end	= 0x04ce01ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 101,
+		.flags  = IORESOURCE_IRQ,
+	},
 };
 
-static struct platform_device sdcard_cn3_device = {
-	.name		= "spi_gpio",
-	.dev	= {
-		.platform_data	= &sdcard_cn3_platform_data,
+static struct platform_device sdhi0_cn3_device = {
+	.name		= "sh_mobile_sdhi",
+	.id             = 0, /* "sdhi0" clock */
+	.num_resources	= ARRAY_SIZE(sdhi0_cn3_resources),
+	.resource	= sdhi0_cn3_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_SDHI0,
+	},
+};
+
+static struct resource sdhi1_cn7_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start	= 0x04cf0000,
+		.end	= 0x04cf01ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 24,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_cn7_device = {
+	.name		= "sh_mobile_sdhi",
+	.id             = 1, /* "sdhi1" clock */
+	.num_resources	= ARRAY_SIZE(sdhi1_cn7_resources),
+	.resource	= sdhi1_cn7_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_SDHI1,
 	},
 };
 
@@ -470,22 +501,26 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
 	&lcdc_device,
 	&ceu_device,
 	&nand_flash_device,
-	&sdcard_cn3_device,
+	&sdhi0_cn3_device,
+	&sdhi1_cn7_device,
 	&ap325rxa_camera[0],
 	&ap325rxa_camera[1],
 };
 
-static struct spi_board_info ap325rxa_spi_devices[] = {
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 5000000,
-		.chip_select = 0,
-		.controller_data = (void *) GPIO_PTD5,
-	},
-};
+extern char ap325rxa_sdram_enter_start;
+extern char ap325rxa_sdram_enter_end;
+extern char ap325rxa_sdram_leave_start;
+extern char ap325rxa_sdram_leave_end;
 
 static int __init ap325rxa_devices_setup(void)
 {
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+					&ap325rxa_sdram_enter_start,
+					&ap325rxa_sdram_enter_end,
+					&ap325rxa_sdram_leave_start,
+					&ap325rxa_sdram_leave_end);
+
 	/* LD3 and LD4 LEDs */
 	gpio_request(GPIO_PTX5, NULL); /* RUN */
 	gpio_direction_output(GPIO_PTX5, 1);
@@ -578,12 +613,28 @@ static int __init ap325rxa_devices_setup(void)
 
 	platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
 
+	/* SDHI0 - CN3 - SD CARD */
+	gpio_request(GPIO_FN_SDHI0CD_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0WP_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0D3_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0D2_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0D1_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0D0_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0CMD_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK_PTD, NULL);
+
+	/* SDHI1 - CN7 - MICRO SD CARD */
+	gpio_request(GPIO_FN_SDHI1CD, NULL);
+	gpio_request(GPIO_FN_SDHI1D3, NULL);
+	gpio_request(GPIO_FN_SDHI1D2, NULL);
+	gpio_request(GPIO_FN_SDHI1D1, NULL);
+	gpio_request(GPIO_FN_SDHI1D0, NULL);
+	gpio_request(GPIO_FN_SDHI1CMD, NULL);
+	gpio_request(GPIO_FN_SDHI1CLK, NULL);
+
 	i2c_register_board_info(0, ap325rxa_i2c_devices,
 				ARRAY_SIZE(ap325rxa_i2c_devices));
 
-	spi_register_board_info(ap325rxa_spi_devices,
-				ARRAY_SIZE(ap325rxa_spi_devices));
-
 	return platform_add_devices(ap325rxa_devices,
 				ARRAY_SIZE(ap325rxa_devices));
 }
diff --git a/arch/sh/boards/mach-ecovec24/Makefile b/arch/sh/boards/mach-ecovec24/Makefile
index 51f852151655..e69bc82208fc 100644
--- a/arch/sh/boards/mach-ecovec24/Makefile
+++ b/arch/sh/boards/mach-ecovec24/Makefile
@@ -6,4 +6,4 @@
 # for more details.
 #
 
-obj-y	 := setup.o
\ No newline at end of file
+obj-y	 := setup.o sdram.o
\ No newline at end of file
diff --git a/arch/sh/boards/mach-ecovec24/sdram.S b/arch/sh/boards/mach-ecovec24/sdram.S
new file mode 100644
index 000000000000..833440044407
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/sdram.S
@@ -0,0 +1,52 @@
+/*
+ * Ecovec24 sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(ecovec24_sdram_enter_start)
+
+	/* DBSC: put memory in self-refresh mode */
+
+	ED 0xFD000010, 0x00000000 /* DBEN */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(ecovec24_sdram_enter_end)
+
+	.balign 4
+ENTRY(ecovec24_sdram_leave_start)
+
+	/* DBSC: put memory in auto-refresh mode */
+
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	WAIT 1
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(ecovec24_sdram_leave_end)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 3b1ceb46fa54..826e62326d51 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -20,12 +20,14 @@
 #include <linux/i2c.h>
 #include <linux/i2c/tsc2007.h>
 #include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_eth.h>
-#include <asm/sh_keysc.h>
 #include <asm/clock.h>
+#include <asm/suspend.h>
 #include <cpu/sh7724.h>
 
 /*
@@ -147,6 +149,9 @@ static struct platform_device sh_eth_device = {
 	},
 	.num_resources = ARRAY_SIZE(sh_eth_resources),
 	.resource = sh_eth_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_ETHER,
+	},
 };
 
 /* USB0 host */
@@ -185,30 +190,18 @@ static struct platform_device usb0_host_device = {
 	.resource	= usb0_host_resources,
 };
 
-/*
- * USB1
- *
- * CN5 can use both host/function,
- * and we can determine it by checking PTB[3]
- *
- * This time only USB1 host is supported.
- */
+/* USB1 host/function */
 void usb1_port_power(int port, int power)
 {
-	if (!gpio_get_value(GPIO_PTB3)) {
-		printk(KERN_ERR "USB1 function is not supported\n");
-		return;
-	}
-
 	gpio_set_value(GPIO_PTB5, power);
 }
 
-static struct r8a66597_platdata usb1_host_data = {
+static struct r8a66597_platdata usb1_common_data = {
 	.on_chip = 1,
 	.port_power = usb1_port_power,
 };
 
-static struct resource usb1_host_resources[] = {
+static struct resource usb1_common_resources[] = {
 	[0] = {
 		.start	= 0xa4d90000,
 		.end	= 0xa4d90124 - 1,
@@ -221,16 +214,16 @@ static struct resource usb1_host_resources[] = {
 	},
 };
 
-static struct platform_device usb1_host_device = {
-	.name		= "r8a66597_hcd",
+static struct platform_device usb1_common_device = {
+	/* .name will be added in arch_setup */
 	.id		= 1,
 	.dev = {
 		.dma_mask		= NULL,         /*  not use dma */
 		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usb1_host_data,
+		.platform_data		= &usb1_common_data,
 	},
-	.num_resources	= ARRAY_SIZE(usb1_host_resources),
-	.resource	= usb1_host_resources,
+	.num_resources	= ARRAY_SIZE(usb1_common_resources),
+	.resource	= usb1_common_resources,
 };
 
 /* LCDC */
@@ -428,16 +421,90 @@ static struct i2c_board_info ts_i2c_clients = {
 	.irq		= IRQ0,
 };
 
+/* SHDI0 */
+static void sdhi0_set_pwr(struct platform_device *pdev, int state)
+{
+	gpio_set_value(GPIO_PTB6, state);
+}
+
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.set_pwr = sdhi0_set_pwr,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0x04ce0000,
+		.end    = 0x04ce01ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 101,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi0_resources),
+	.resource       = sdhi0_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &sdhi0_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_SDHI0,
+	},
+};
+
+/* SHDI1 */
+static void sdhi1_set_pwr(struct platform_device *pdev, int state)
+{
+	gpio_set_value(GPIO_PTB7, state);
+}
+
+static struct sh_mobile_sdhi_info sdhi1_info = {
+	.set_pwr = sdhi1_set_pwr,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0x04cf0000,
+		.end    = 0x04cf01ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 24,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi1_resources),
+	.resource       = sdhi1_resources,
+	.id             = 1,
+	.dev	= {
+		.platform_data	= &sdhi1_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_SDHI1,
+	},
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
 	&sh_eth_device,
 	&usb0_host_device,
-	&usb1_host_device, /* USB1 host support */
+	&usb1_common_device,
 	&lcdc_device,
 	&ceu0_device,
 	&ceu1_device,
 	&keysc_device,
+	&sdhi0_device,
+	&sdhi1_device,
 };
 
 #define EEPROM_ADDR 0x50
@@ -466,12 +533,9 @@ static u8 mac_read(struct i2c_adapter *a, u8 command)
 	return buf;
 }
 
-#define MAC_LEN 6
-static void __init sh_eth_init(void)
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
 {
 	struct i2c_adapter *a = i2c_get_adapter(1);
-	struct clk *eth_clk;
-	u8 mac[MAC_LEN];
 	int i;
 
 	if (!a) {
@@ -479,39 +543,30 @@ static void __init sh_eth_init(void)
 		return;
 	}
 
-	eth_clk = clk_get(NULL, "eth0");
-	if (!eth_clk) {
-		pr_err("can not get eth0 clk\n");
-		return;
-	}
-
 	/* read MAC address frome EEPROM */
-	for (i = 0; i < MAC_LEN; i++) {
-		mac[i] = mac_read(a, 0x10 + i);
+	for (i = 0; i < sizeof(pd->mac_addr); i++) {
+		pd->mac_addr[i] = mac_read(a, 0x10 + i);
 		msleep(10);
 	}
-
-	/* clock enable */
-	clk_enable(eth_clk);
-
-	/* reset sh-eth */
-	ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
-
-	/* set MAC addr */
-	ctrl_outl((mac[0] << 24) |
-		  (mac[1] << 16) |
-		  (mac[2] <<  8) |
-		  (mac[3] <<  0), SH_ETH_MAHR);
-	ctrl_outl((mac[4] <<  8) |
-		  (mac[5] <<  0), SH_ETH_MALR);
-
-	clk_put(eth_clk);
 }
 
 #define PORT_HIZA 0xA4050158
 #define IODRIVEA  0xA405018A
+
+extern char ecovec24_sdram_enter_start;
+extern char ecovec24_sdram_enter_end;
+extern char ecovec24_sdram_leave_start;
+extern char ecovec24_sdram_leave_end;
+
 static int __init arch_setup(void)
 {
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+					&ecovec24_sdram_enter_start,
+					&ecovec24_sdram_enter_end,
+					&ecovec24_sdram_leave_start,
+					&ecovec24_sdram_leave_end);
+
 	/* enable STATUS0, STATUS2 and PDSTATUS */
 	gpio_request(GPIO_FN_STATUS0, NULL);
 	gpio_request(GPIO_FN_STATUS2, NULL);
@@ -561,6 +616,14 @@ static int __init arch_setup(void)
 	ctrl_outw(0x0600, 0xa40501d4);
 	ctrl_outw(0x0600, 0xa4050192);
 
+	if (gpio_get_value(GPIO_PTB3)) {
+		printk(KERN_INFO "USB1 function is selected\n");
+		usb1_common_device.name = "r8a66597_udc";
+	} else {
+		printk(KERN_INFO "USB1 host is selected\n");
+		usb1_common_device.name = "r8a66597_hcd";
+	}
+
 	/* enable LCDC */
 	gpio_request(GPIO_FN_LCDD23,   NULL);
 	gpio_request(GPIO_FN_LCDD22,   NULL);
@@ -603,8 +666,8 @@ static int __init arch_setup(void)
 	gpio_direction_output(GPIO_PTR1, 0);
 	gpio_direction_output(GPIO_PTA2, 0);
 
-	/* I/O buffer drive ability is low */
-	ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA);
+	/* I/O buffer drive ability is high */
+	ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
 
 	if (gpio_get_value(GPIO_PTE6)) {
 		/* DVI */
@@ -710,6 +773,33 @@ static int __init arch_setup(void)
 	gpio_direction_input(GPIO_PTR5);
 	gpio_direction_input(GPIO_PTR6);
 
+	/* enable SDHI0 (needs DS2.4 set to ON) */
+	gpio_request(GPIO_FN_SDHI0CD,  NULL);
+	gpio_request(GPIO_FN_SDHI0WP,  NULL);
+	gpio_request(GPIO_FN_SDHI0CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK, NULL);
+	gpio_request(GPIO_FN_SDHI0D3,  NULL);
+	gpio_request(GPIO_FN_SDHI0D2,  NULL);
+	gpio_request(GPIO_FN_SDHI0D1,  NULL);
+	gpio_request(GPIO_FN_SDHI0D0,  NULL);
+	gpio_request(GPIO_PTB6, NULL);
+	gpio_direction_output(GPIO_PTB6, 0);
+
+	/* enable SDHI1 (needs DS2.6,7 set to ON,OFF) */
+	gpio_request(GPIO_FN_SDHI1CD,  NULL);
+	gpio_request(GPIO_FN_SDHI1WP,  NULL);
+	gpio_request(GPIO_FN_SDHI1CMD, NULL);
+	gpio_request(GPIO_FN_SDHI1CLK, NULL);
+	gpio_request(GPIO_FN_SDHI1D3,  NULL);
+	gpio_request(GPIO_FN_SDHI1D2,  NULL);
+	gpio_request(GPIO_FN_SDHI1D1,  NULL);
+	gpio_request(GPIO_FN_SDHI1D0,  NULL);
+	gpio_request(GPIO_PTB7, NULL);
+	gpio_direction_output(GPIO_PTB7, 0);
+
+	/* I/O buffer drive ability is high for SDHI1 */
+	ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+
 	/* enable I2C device */
 	i2c_register_board_info(1, i2c1_devices,
 				ARRAY_SIZE(i2c1_devices));
@@ -721,12 +811,11 @@ arch_initcall(arch_setup);
 
 static int __init devices_setup(void)
 {
-	sh_eth_init();
+	sh_eth_init(&sh_eth_plat);
 	return 0;
 }
 device_initcall(devices_setup);
 
-
 static struct sh_machine_vector mv_ecovec __initmv = {
 	.mv_name	= "R0P7724 (EcoVec)",
 };
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index 566e69d8d729..f663c14d8885 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -384,7 +384,7 @@ static unsigned char irl2irq[HL_NR_IRL];
 
 static int highlander_irq_demux(int irq)
 {
-	if (irq >= HL_NR_IRL || !irl2irq[irq])
+	if (irq >= HL_NR_IRL || irq < 0 || !irl2irq[irq])
 		return irq;
 
 	return irl2irq[irq];
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
index 8f305b36358b..e6dd5e96321e 100644
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <sound/sh_dac_audio.h>
 #include <asm/hd64461.h>
 #include <asm/io.h>
 #include <mach/hp6xx.h>
@@ -51,9 +52,63 @@ static struct platform_device jornadakbd_device = {
 	.id		= -1,
 };
 
+static void dac_audio_start(struct dac_audio_pdata *pdata)
+{
+	u16 v;
+	u8 v8;
+
+	/* HP Jornada 680/690 speaker on */
+	v = inw(HD64461_GPADR);
+	v &= ~HD64461_GPADR_SPEAKER;
+	outw(v, HD64461_GPADR);
+
+	/* HP Palmtop 620lx/660lx speaker on */
+	v8 = inb(PKDR);
+	v8 &= ~PKDR_SPEAKER;
+	outb(v8, PKDR);
+
+	sh_dac_enable(pdata->channel);
+}
+
+static void dac_audio_stop(struct dac_audio_pdata *pdata)
+{
+	u16 v;
+	u8 v8;
+
+	/* HP Jornada 680/690 speaker off */
+	v = inw(HD64461_GPADR);
+	v |= HD64461_GPADR_SPEAKER;
+	outw(v, HD64461_GPADR);
+
+	/* HP Palmtop 620lx/660lx speaker off */
+	v8 = inb(PKDR);
+	v8 |= PKDR_SPEAKER;
+	outb(v8, PKDR);
+
+	sh_dac_output(0, pdata->channel);
+	sh_dac_disable(pdata->channel);
+}
+
+static struct dac_audio_pdata dac_audio_platform_data = {
+	.buffer_size		= 64000,
+	.channel		= 1,
+	.start			= dac_audio_start,
+	.stop			= dac_audio_stop,
+};
+
+static struct platform_device dac_audio_device = {
+	.name		= "dac_audio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &dac_audio_platform_data,
+	}
+
+};
+
 static struct platform_device *hp6xx_devices[] __initdata = {
 	&cf_ide_device,
 	&jornadakbd_device,
+	&dac_audio_device,
 };
 
 static void __init hp6xx_init_irq(void)
diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
index 5d5867826e3b..4e577a3bf658 100644
--- a/arch/sh/boards/mach-kfr2r09/Makefile
+++ b/arch/sh/boards/mach-kfr2r09/Makefile
@@ -1,2 +1,2 @@
-obj-y	 := setup.o
+obj-y	 := setup.o sdram.o
 obj-$(CONFIG_FB_SH_MOBILE_LCDC)	+=  lcd_wqvga.o
diff --git a/arch/sh/boards/mach-kfr2r09/sdram.S b/arch/sh/boards/mach-kfr2r09/sdram.S
new file mode 100644
index 000000000000..0c9f55bec2fe
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/sdram.S
@@ -0,0 +1,80 @@
+/*
+ * KFR2R09 sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(kfr2r09_sdram_enter_start)
+
+	/* DBSC: put memory in self-refresh mode */
+
+	ED 0xFD000010, 0x00000000 /* DBEN */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(kfr2r09_sdram_enter_end)
+
+	.balign 4
+ENTRY(kfr2r09_sdram_leave_start)
+
+	/* DBSC: put memory in auto-refresh mode */
+
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_RSTANDBY, r0
+	bf	resume_rstandby
+
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	WAIT 1
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+resume_rstandby:
+
+	/* DBSC: re-initialize and put in auto-refresh */
+
+	ED 0xFD000108, 0x40000301 /* DBPDCNT0 */
+	ED 0xFD000020, 0x011B0002 /* DBCONF */
+	ED 0xFD000030, 0x03060E02 /* DBTR0 */
+	ED 0xFD000034, 0x01020102 /* DBTR1 */
+	ED 0xFD000038, 0x01090406 /* DBTR2 */
+	ED 0xFD000008, 0x00000004 /* DBKIND */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000018, 0x00000001 /* DBCKECNT */
+	WAIT 1
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000044, 0x000004AF /* DBRFPDN1 */
+	ED 0xFD000048, 0x20CF0037 /* DBRFPDN2 */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000108, 0x40000300 /* DBPDCNT0 */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(kfr2r09_sdram_leave_end)
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index c08d33fe2104..87438d6603d6 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -16,13 +16,16 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/input/sh_keysc.h>
 #include <linux/i2c.h>
 #include <linux/usb/r8a66597.h>
+#include <media/soc_camera.h>
+#include <media/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
+#include <asm/suspend.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
-#include <asm/sh_keysc.h>
 #include <cpu/sh7724.h>
 #include <mach/kfr2r09.h>
 
@@ -212,11 +215,154 @@ static struct platform_device kfr2r09_usb0_gadget_device = {
 	.resource	= kfr2r09_usb0_gadget_resources,
 };
 
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource kfr2r09_ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.end  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device kfr2r09_ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(kfr2r09_ceu_resources),
+	.resource	= kfr2r09_ceu_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU0,
+	},
+};
+
+static struct i2c_board_info kfr2r09_i2c_camera = {
+	I2C_BOARD_INFO("rj54n1cb0c", 0x50),
+};
+
+static struct clk *camera_clk;
+
+#define DRVCRB 0xA405018C
+static int camera_power(struct device *dev, int mode)
+{
+	int ret;
+
+	if (mode) {
+		long rate;
+
+		camera_clk = clk_get(NULL, "video_clk");
+		if (IS_ERR(camera_clk))
+			return PTR_ERR(camera_clk);
+
+		/* set VIO_CKO clock to 25MHz */
+		rate = clk_round_rate(camera_clk, 25000000);
+		ret = clk_set_rate(camera_clk, rate);
+		if (ret < 0)
+			goto eclkrate;
+
+		/* set DRVCRB
+		 *
+		 * use 1.8 V for VccQ_VIO
+		 * use 2.85V for VccQ_SR
+		 */
+		ctrl_outw((ctrl_inw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
+
+		/* reset clear */
+		ret = gpio_request(GPIO_PTB4, NULL);
+		if (ret < 0)
+			goto eptb4;
+		ret = gpio_request(GPIO_PTB7, NULL);
+		if (ret < 0)
+			goto eptb7;
+
+		ret = gpio_direction_output(GPIO_PTB4, 1);
+		if (!ret)
+			ret = gpio_direction_output(GPIO_PTB7, 1);
+		if (ret < 0)
+			goto egpioout;
+		msleep(1);
+
+		ret = clk_enable(camera_clk);	/* start VIO_CKO */
+		if (ret < 0)
+			goto eclkon;
+
+		return 0;
+	}
+
+	ret = 0;
+
+	clk_disable(camera_clk);
+eclkon:
+	gpio_set_value(GPIO_PTB7, 0);
+egpioout:
+	gpio_set_value(GPIO_PTB4, 0);
+	gpio_free(GPIO_PTB7);
+eptb7:
+	gpio_free(GPIO_PTB4);
+eptb4:
+eclkrate:
+	clk_put(camera_clk);
+	return ret;
+}
+
+static struct soc_camera_link rj54n1_link = {
+	.power		= camera_power,
+	.board_info	= &kfr2r09_i2c_camera,
+	.i2c_adapter_id	= 1,
+	.module_name	= "rj54n1cb0c",
+};
+
+static struct platform_device kfr2r09_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &rj54n1_link,
+	},
+};
+
+static struct resource kfr2r09_sh_sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0x04ce0000,
+		.end    = 0x04ce01ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 101,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
+	.resource       = kfr2r09_sh_sdhi0_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_SDHI0,
+	},
+};
+
 static struct platform_device *kfr2r09_devices[] __initdata = {
 	&kfr2r09_nor_flash_device,
 	&kfr2r09_nand_flash_device,
 	&kfr2r09_sh_keysc_device,
 	&kfr2r09_sh_lcdc_device,
+	&kfr2r09_ceu_device,
+	&kfr2r09_camera,
+	&kfr2r09_sh_sdhi0_device,
 };
 
 #define BSC_CS0BCR 0xfec10004
@@ -268,11 +414,59 @@ static int kfr2r09_usb0_gadget_i2c_setup(void)
 
 	return 0;
 }
+
+static int kfr2r09_serial_i2c_setup(void)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	/* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[0] = 0;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = I2C_M_RD;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[1] = buf[0] | (1 << 6);
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	return 0;
+}
 #else
 static int kfr2r09_usb0_gadget_i2c_setup(void)
 {
 	return -ENODEV;
 }
+
+static int kfr2r09_serial_i2c_setup(void)
+{
+	return -ENODEV;
+}
 #endif
 
 static int kfr2r09_usb0_gadget_setup(void)
@@ -299,11 +493,27 @@ static int kfr2r09_usb0_gadget_setup(void)
 	return 0;
 }
 
+extern char kfr2r09_sdram_enter_start;
+extern char kfr2r09_sdram_enter_end;
+extern char kfr2r09_sdram_leave_start;
+extern char kfr2r09_sdram_leave_end;
+
 static int __init kfr2r09_devices_setup(void)
 {
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+					SUSP_SH_RSTANDBY,
+					&kfr2r09_sdram_enter_start,
+					&kfr2r09_sdram_enter_end,
+					&kfr2r09_sdram_leave_start,
+					&kfr2r09_sdram_leave_end);
+
 	/* enable SCIF1 serial port for YC401 console support */
 	gpio_request(GPIO_FN_SCIF1_RXD, NULL);
 	gpio_request(GPIO_FN_SCIF1_TXD, NULL);
+	kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
+	gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
+	gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
 
 	/* setup NOR flash at CS0 */
 	ctrl_outl(0x36db0400, BSC_CS0BCR);
@@ -361,6 +571,32 @@ static int __init kfr2r09_devices_setup(void)
 	if (kfr2r09_usb0_gadget_setup() == 0)
 		platform_device_register(&kfr2r09_usb0_gadget_device);
 
+	/* CEU */
+	gpio_request(GPIO_FN_VIO_CKO, NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_VD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_D7, NULL);
+	gpio_request(GPIO_FN_VIO0_D6, NULL);
+	gpio_request(GPIO_FN_VIO0_D5, NULL);
+	gpio_request(GPIO_FN_VIO0_D4, NULL);
+	gpio_request(GPIO_FN_VIO0_D3, NULL);
+	gpio_request(GPIO_FN_VIO0_D2, NULL);
+	gpio_request(GPIO_FN_VIO0_D1, NULL);
+	gpio_request(GPIO_FN_VIO0_D0, NULL);
+
+	platform_resource_setup_memory(&kfr2r09_ceu_device, "ceu", 4 << 20);
+
+	/* SDHI0 connected to yc304 */
+	gpio_request(GPIO_FN_SDHI0CD, NULL);
+	gpio_request(GPIO_FN_SDHI0D3, NULL);
+	gpio_request(GPIO_FN_SDHI0D2, NULL);
+	gpio_request(GPIO_FN_SDHI0D1, NULL);
+	gpio_request(GPIO_FN_SDHI0D0, NULL);
+	gpio_request(GPIO_FN_SDHI0CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK, NULL);
+
 	return platform_add_devices(kfr2r09_devices,
 				    ARRAY_SIZE(kfr2r09_devices));
 }
diff --git a/arch/sh/boards/mach-migor/Makefile b/arch/sh/boards/mach-migor/Makefile
index 5f231dd25c0e..4601a89e5ac7 100644
--- a/arch/sh/boards/mach-migor/Makefile
+++ b/arch/sh/boards/mach-migor/Makefile
@@ -1,2 +1,2 @@
-obj-y	 := setup.o
+obj-y	 := setup.o sdram.o
 obj-$(CONFIG_SH_MIGOR_QVGA)	+=  lcd_qvga.o
diff --git a/arch/sh/boards/mach-migor/sdram.S b/arch/sh/boards/mach-migor/sdram.S
new file mode 100644
index 000000000000..614aa3a1398c
--- /dev/null
+++ b/arch/sh/boards/mach-migor/sdram.S
@@ -0,0 +1,69 @@
+/*
+ * Migo-R sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(migor_sdram_enter_start)
+
+	/* SBSC: disable power down and put in self-refresh mode */
+	mov.l	1f, r4
+	mov.l	2f, r1
+	mov.l	@r4, r2
+	or	r1, r2
+	mov.l   3f, r3
+	and	r3, r2
+	mov.l	r2, @r4
+
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+2:	.long	0x00000400
+3:	.long	0xffff7fff
+ENTRY(migor_sdram_enter_end)
+
+	.balign 4
+ENTRY(migor_sdram_leave_start)
+
+	/* SBSC: set auto-refresh mode */
+	mov.l	1f, r4
+	mov.l	@r4, r0
+	mov.l   4f, r1
+	and	r1, r0
+	mov.l	r0, @r4
+	mov.l	6f, r4
+	mov.l	8f, r0
+	mov.l	@r4, r1
+	mov	#-1, r4
+	add	r4, r1
+	or	r1, r0
+	mov.l	7f, r1
+	mov.l	r0, @r1
+
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+4:	.long	0xfffffbff
+6:	.long   0xfe40001c /* RTCOR */
+7:	.long   0xfe400018 /* RTCNT */
+8:	.long   0xa55a0000
+ENTRY(migor_sdram_leave_end)
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 6ed1fd32369e..9099b6da9957 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
+#include <linux/input/sh_keysc.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
 #include <linux/i2c.h>
@@ -18,8 +19,6 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <media/ov772x.h>
@@ -27,7 +26,7 @@
 #include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
-#include <asm/sh_keysc.h>
+#include <asm/suspend.h>
 #include <mach/migor.h>
 #include <cpu/sh7722.h>
 
@@ -390,17 +389,25 @@ static struct platform_device migor_ceu_device = {
 	},
 };
 
-struct spi_gpio_platform_data sdcard_cn9_platform_data = {
-	.sck = GPIO_PTD0,
-	.mosi = GPIO_PTD1,
-	.miso = GPIO_PTD2,
-	.num_chipselect = 1,
+static struct resource sdhi_cn9_resources[] = {
+	[0] = {
+		.name	= "SDHI",
+		.start	= 0x04ce0000,
+		.end	= 0x04ce01ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 101,
+		.flags  = IORESOURCE_IRQ,
+	},
 };
 
-static struct platform_device sdcard_cn9_device = {
-	.name		= "spi_gpio",
-	.dev	= {
-		.platform_data	= &sdcard_cn9_platform_data,
+static struct platform_device sdhi_cn9_device = {
+	.name		= "sh_mobile_sdhi",
+	.num_resources	= ARRAY_SIZE(sdhi_cn9_resources),
+	.resource	= sdhi_cn9_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_SDHI,
 	},
 };
 
@@ -467,23 +474,24 @@ static struct platform_device *migor_devices[] __initdata = {
 	&migor_ceu_device,
 	&migor_nor_flash_device,
 	&migor_nand_flash_device,
-	&sdcard_cn9_device,
+	&sdhi_cn9_device,
 	&migor_camera[0],
 	&migor_camera[1],
 };
 
-static struct spi_board_info migor_spi_devices[] = {
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 5000000,
-		.chip_select = 0,
-		.controller_data = (void *) GPIO_PTD5,
-	},
-};
+extern char migor_sdram_enter_start;
+extern char migor_sdram_enter_end;
+extern char migor_sdram_leave_start;
+extern char migor_sdram_leave_end;
 
 static int __init migor_devices_setup(void)
 {
-
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+					&migor_sdram_enter_start,
+					&migor_sdram_enter_end,
+					&migor_sdram_leave_start,
+					&migor_sdram_leave_end);
 #ifdef CONFIG_PM
 	/* Let D11 LED show STATUS0 */
 	gpio_request(GPIO_FN_STATUS0, NULL);
@@ -525,6 +533,16 @@ static int __init migor_devices_setup(void)
 	gpio_request(GPIO_PTA1, NULL);
 	gpio_direction_input(GPIO_PTA1);
 
+	/* SDHI */
+	gpio_request(GPIO_FN_SDHICD, NULL);
+	gpio_request(GPIO_FN_SDHIWP, NULL);
+	gpio_request(GPIO_FN_SDHID3, NULL);
+	gpio_request(GPIO_FN_SDHID2, NULL);
+	gpio_request(GPIO_FN_SDHID1, NULL);
+	gpio_request(GPIO_FN_SDHID0, NULL);
+	gpio_request(GPIO_FN_SDHICMD, NULL);
+	gpio_request(GPIO_FN_SDHICLK, NULL);
+
 	/* Touch Panel */
 	gpio_request(GPIO_FN_IRQ6, NULL);
 
@@ -612,9 +630,6 @@ static int __init migor_devices_setup(void)
 	i2c_register_board_info(0, migor_i2c_devices,
 				ARRAY_SIZE(migor_i2c_devices));
 
-	spi_register_board_info(migor_spi_devices,
-				ARRAY_SIZE(migor_spi_devices));
-
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
 arch_initcall(migor_devices_setup);
diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index c70fecedcac4..78d7b27c80da 100644
--- a/arch/sh/boards/mach-r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
@@ -116,7 +116,7 @@ static unsigned char irl2irq[R2D_NR_IRL];
 
 int rts7751r2d_irq_demux(int irq)
 {
-	if (irq >= R2D_NR_IRL || !irl2irq[irq])
+	if (irq >= R2D_NR_IRL || irq < 0 || !irl2irq[irq])
 		return irq;
 
 	return irl2irq[irq];
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index 02d21a3e2a8f..4eb31acfafef 100644
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -16,15 +16,17 @@
 #include <asm/io.h>
 #include <mach-se/mach/se7722.h>
 
+unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, };
+
 static void disable_se7722_irq(unsigned int irq)
 {
-	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+	unsigned int bit = (unsigned int)get_irq_chip_data(irq);
 	ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
 }
 
 static void enable_se7722_irq(unsigned int irq)
 {
-	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+	unsigned int bit = (unsigned int)get_irq_chip_data(irq);
 	ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
 }
 
@@ -38,18 +40,15 @@ static struct irq_chip se7722_irq_chip __read_mostly = {
 static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short intv = ctrl_inw(IRQ01_STS);
-	struct irq_desc *ext_desc;
-	unsigned int ext_irq = SE7722_FPGA_IRQ_BASE;
+	unsigned int ext_irq = 0;
 
 	intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
 
-	while (intv) {
-		if (intv & 1) {
-			ext_desc = irq_desc + ext_irq;
-			handle_level_irq(ext_irq, ext_desc);
-		}
-		intv >>= 1;
-		ext_irq++;
+	for (; intv; intv >>= 1, ext_irq++) {
+		if (!(intv & 1))
+			continue;
+
+		generic_handle_irq(se7722_fpga_irq[ext_irq]);
 	}
 }
 
@@ -63,11 +62,18 @@ void __init init_se7722_IRQ(void)
 	ctrl_outw(0, IRQ01_MASK);       /* disable all irqs */
 	ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
 
-	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++)
-		set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i,
+	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
+		se7722_fpga_irq[i] = create_irq();
+		if (se7722_fpga_irq[i] < 0)
+			return;
+
+		set_irq_chip_and_handler_name(se7722_fpga_irq[i],
 					      &se7722_irq_chip,
 					      handle_level_irq, "level");
 
+		set_irq_chip_data(se7722_fpga_irq[i], (void *)i);
+	}
+
 	set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux);
 	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
 
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index 36374078e521..b1cb9425b600 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/input.h>
+#include <linux/input/sh_keysc.h>
 #include <linux/smc91x.h>
 #include <mach-se/mach/se7722.h>
 #include <mach-se/mach/mrshpc.h>
@@ -21,7 +22,6 @@
 #include <asm/clock.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
-#include <asm/sh_keysc.h>
 #include <cpu/sh7722.h>
 
 /* Heartbeat */
@@ -60,8 +60,7 @@ static struct resource smc91x_eth_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = SMC_IRQ,
-		.end    = SMC_IRQ,
+		/* Filled in later */
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -90,8 +89,7 @@ static struct resource cf_ide_resources[] = {
 		.flags  = IORESOURCE_IO,
 	},
 	[2] = {
-		.start  = MRSHPC_IRQ0,
-		.end    = MRSHPC_IRQ0,
+		/* Filled in later */
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -153,6 +151,14 @@ static struct platform_device *se7722_devices[] __initdata = {
 static int __init se7722_devices_setup(void)
 {
 	mrshpc_setup_windows();
+
+	/* Wire-up dynamic vectors */
+	cf_ide_resources[2].start = cf_ide_resources[2].end =
+		se7722_fpga_irq[SE7722_FPGA_IRQ_MRSHPC0];
+
+	smc91x_eth_resources[1].start = smc91x_eth_resources[1].end =
+		se7722_fpga_irq[SE7722_FPGA_IRQ_SMC];
+
 	return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
 }
 device_initcall(se7722_devices_setup);
@@ -193,6 +199,5 @@ static void __init se7722_setup(char **cmdline_p)
 static struct sh_machine_vector mv_se7722 __initmv = {
 	.mv_name                = "Solution Engine 7722" ,
 	.mv_setup               = se7722_setup ,
-	.mv_nr_irqs		= SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR,
 	.mv_init_irq		= init_se7722_IRQ,
 };
diff --git a/arch/sh/boards/mach-se/7724/Makefile b/arch/sh/boards/mach-se/7724/Makefile
index 349cbd6ce82d..a08b36830f0e 100644
--- a/arch/sh/boards/mach-se/7724/Makefile
+++ b/arch/sh/boards/mach-se/7724/Makefile
@@ -7,4 +7,4 @@
 #
 #
 
-obj-y	 := setup.o irq.o
\ No newline at end of file
+obj-y	 := setup.o irq.o sdram.o
diff --git a/arch/sh/boards/mach-se/7724/sdram.S b/arch/sh/boards/mach-se/7724/sdram.S
new file mode 100644
index 000000000000..9040167d5022
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/sdram.S
@@ -0,0 +1,52 @@
+/*
+ * MS7724SE sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(ms7724se_sdram_enter_start)
+
+	/* DBSC: put memory in self-refresh mode */
+
+	ED 0xFD000010, 0x00000000 /* DBEN */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(ms7724se_sdram_enter_end)
+
+	.balign 4
+ENTRY(ms7724se_sdram_leave_start)
+
+	/* DBSC: put memory in auto-refresh mode */
+
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	WAIT 1
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(ms7724se_sdram_leave_end)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index e78c3be8ad2f..4b0f0c0dc2b8 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -19,6 +19,7 @@
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
@@ -27,7 +28,7 @@
 #include <asm/heartbeat.h>
 #include <asm/sh_eth.h>
 #include <asm/clock.h>
-#include <asm/sh_keysc.h>
+#include <asm/suspend.h>
 #include <cpu/sh7724.h>
 #include <mach-se/mach/se7724.h>
 
@@ -313,6 +314,9 @@ static struct platform_device fsi_device = {
 	.dev	= {
 		.platform_data	= &fsi_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_SPU, /* FSI needs SPU hwblk */
+	},
 };
 
 /* KEYSC in SoC (Needs SW33-2 set to ON) */
@@ -448,6 +452,52 @@ static struct platform_device sh7724_usb1_gadget_device = {
 	.resource	= sh7724_usb1_gadget_resources,
 };
 
+static struct resource sdhi0_cn7_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0x04ce0000,
+		.end    = 0x04ce01ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 101,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_cn7_device = {
+	.name           = "sh_mobile_sdhi",
+	.id		= 0,
+	.num_resources  = ARRAY_SIZE(sdhi0_cn7_resources),
+	.resource       = sdhi0_cn7_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_SDHI0,
+	},
+};
+
+static struct resource sdhi1_cn8_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0x04cf0000,
+		.end    = 0x04cf01ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 24,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_cn8_device = {
+	.name           = "sh_mobile_sdhi",
+	.id		= 1,
+	.num_resources  = ARRAY_SIZE(sdhi1_cn8_resources),
+	.resource       = sdhi1_cn8_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_SDHI1,
+	},
+};
+
 static struct platform_device *ms7724se_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
@@ -460,6 +510,8 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&sh7724_usb0_host_device,
 	&sh7724_usb1_gadget_device,
 	&fsi_device,
+	&sdhi0_cn7_device,
+	&sdhi1_cn8_device,
 };
 
 #define EEPROM_OP   0xBA206000
@@ -484,7 +536,7 @@ static int __init sh_eth_is_eeprom_ready(void)
 static void __init sh_eth_init(void)
 {
 	int i;
-	u16 mac[3];
+	u16 mac;
 
 	/* check EEPROM status */
 	if (!sh_eth_is_eeprom_ready())
@@ -498,16 +550,10 @@ static void __init sh_eth_init(void)
 		if (!sh_eth_is_eeprom_ready())
 			return;
 
-		mac[i] = ctrl_inw(EEPROM_DATA);
-		mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+		mac = ctrl_inw(EEPROM_DATA);
+		sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
+		sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
 	}
-
-	/* reset sh-eth */
-	ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
-
-	/* set MAC addr */
-	ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
-	ctrl_outl((mac[2]), SH_ETH_MALR);
 }
 
 #define SW4140    0xBA201000
@@ -524,11 +570,22 @@ static void __init sh_eth_init(void)
 #define SW41_G    0x4000
 #define SW41_H    0x8000
 
+extern char ms7724se_sdram_enter_start;
+extern char ms7724se_sdram_enter_end;
+extern char ms7724se_sdram_leave_start;
+extern char ms7724se_sdram_leave_end;
+
 static int __init devices_setup(void)
 {
 	u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
 	struct clk *fsia_clk;
 
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+					&ms7724se_sdram_enter_start,
+					&ms7724se_sdram_enter_end,
+					&ms7724se_sdram_leave_start,
+					&ms7724se_sdram_leave_end);
 	/* Reset Release */
 	ctrl_outw(ctrl_inw(FPGA_OUT) &
 		  ~((1 << 1)  | /* LAN */
@@ -698,6 +755,26 @@ static int __init devices_setup(void)
 	clk_set_rate(&fsimcka_clk, 11000);
 	clk_put(fsia_clk);
 
+	/* SDHI0 connected to cn7 */
+	gpio_request(GPIO_FN_SDHI0CD, NULL);
+	gpio_request(GPIO_FN_SDHI0WP, NULL);
+	gpio_request(GPIO_FN_SDHI0D3, NULL);
+	gpio_request(GPIO_FN_SDHI0D2, NULL);
+	gpio_request(GPIO_FN_SDHI0D1, NULL);
+	gpio_request(GPIO_FN_SDHI0D0, NULL);
+	gpio_request(GPIO_FN_SDHI0CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK, NULL);
+
+	/* SDHI1 connected to cn8 */
+	gpio_request(GPIO_FN_SDHI1CD, NULL);
+	gpio_request(GPIO_FN_SDHI1WP, NULL);
+	gpio_request(GPIO_FN_SDHI1D3, NULL);
+	gpio_request(GPIO_FN_SDHI1D2, NULL);
+	gpio_request(GPIO_FN_SDHI1D1, NULL);
+	gpio_request(GPIO_FN_SDHI1D0, NULL);
+	gpio_request(GPIO_FN_SDHI1CMD, NULL);
+	gpio_request(GPIO_FN_SDHI1CLK, NULL);
+
 	/*
 	 * enable SH-Eth
 	 *
diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c
index fd56a71ca9d9..b51b1fc4baae 100644
--- a/arch/sh/boot/compressed/misc.c
+++ b/arch/sh/boot/compressed/misc.c
@@ -131,7 +131,7 @@ void decompress_kernel(void)
 #ifdef CONFIG_SUPERH64
 	output_addr = (CONFIG_MEMORY_START + 0x2000);
 #else
-	output_addr = PHYSADDR((unsigned long)&_text+PAGE_SIZE);
+	output_addr = __pa((unsigned long)&_text+PAGE_SIZE);
 #ifdef CONFIG_29BIT
 	output_addr |= P2SEG;
 #endif
diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile
index 5806eee84f6f..f473a24a2d92 100644
--- a/arch/sh/boot/romimage/Makefile
+++ b/arch/sh/boot/romimage/Makefile
@@ -4,16 +4,22 @@
 # create an image suitable for burning to flash from zImage
 #
 
-targets		:= vmlinux head.o
+targets		:= vmlinux head.o zeropage.bin piggy.o
 
 OBJECTS = $(obj)/head.o
-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart \
+		   -T $(obj)/../../kernel/vmlinux.lds
 
 $(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
 	$(call if_changed,ld)
 	@:
 
+OBJCOPYFLAGS += -j .empty_zero_page
+
+$(obj)/zeropage.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
 LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr arch/sh/boot/zImage FORCE
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/zeropage.bin arch/sh/boot/zImage FORCE
 	$(call if_changed,ld)
diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
index 219bc626dd71..93e779a405ec 100644
--- a/arch/sh/boot/romimage/head.S
+++ b/arch/sh/boot/romimage/head.S
@@ -5,6 +5,44 @@
  */
 
 .text
+	#include <asm/page.h>
+
 	.global	romstart
 romstart:
+	/* include board specific setup code */
 #include <mach/romimage.h>
+
+	/* copy the empty_zero_page contents to where vmlinux expects it */
+	mova	empty_zero_page_src, r0
+	mov.l	empty_zero_page_dst, r1
+	mov	#(PAGE_SHIFT - 4), r4
+	mov	#1, r3
+	shld	r4, r3 /* r3 = PAGE_SIZE / 16 */
+
+1:
+	mov.l	@r0, r4
+	mov.l	@(4, r0), r5
+	mov.l	@(8, r0), r6
+	mov.l	@(12, r0), r7
+	add	#16,r0
+	mov.l	r4, @r1
+	mov.l	r5, @(4, r1)
+	mov.l	r6, @(8, r1)
+	mov.l	r7, @(12, r1)
+	dt	r3
+	add	#16,r1
+	bf	1b
+
+	/* jump to the zImage entry point located after the zero page data */
+	mov	#PAGE_SHIFT, r4
+	mov	#1, r1
+	shld	r4, r1
+	mova	empty_zero_page_src, r0
+	add	r1, r0
+	jmp	@r0
+	 nop
+
+	.align 2
+empty_zero_page_dst:
+	.long	_text
+empty_zero_page_src:
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 347ee11351ec..1ee631d3725e 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
-#include <linux/module.h>
 #include <linux/err.h>
 #include <linux/string.h>
 #include <asm/dma.h>
@@ -21,7 +20,6 @@
 static struct sysdev_class dma_sysclass = {
 	.name = "dma",
 };
-EXPORT_SYMBOL(dma_sysclass);
 
 static ssize_t dma_show_devices(struct sys_device *dev,
 				struct sysdev_attribute *attr, char *buf)
diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig
deleted file mode 100644
index e8db585a6638..000000000000
--- a/arch/sh/drivers/pci/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-config PCI
-	bool "PCI support"
-	depends on SYS_SUPPORTS_PCI
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. If you have PCI, say Y, otherwise N.
-
-config SH_PCIDMA_NONCOHERENT
-	bool "Cache and PCI noncoherent"
-	depends on PCI
-	default y
-	help
-	  Enable this option if your platform does not have a CPU cache which
-	  remains coherent with PCI DMA. It is safest to say 'Y', although you
-	  will see better performance if you can say 'N', because the PCI DMA
-	  code will not have to flush the CPU's caches. If you have a PCI host
-	  bridge integrated with your SH CPU, refer carefully to the chip specs
-	  to see if you can say 'N' here. Otherwise, leave it as 'Y'.
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
index 80d40813e057..99d6b3ecbe22 100644
--- a/arch/sh/include/asm/addrspace.h
+++ b/arch/sh/include/asm/addrspace.h
@@ -28,9 +28,6 @@
 /* Returns the privileged segment base of a given address  */
 #define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
 
-/* Returns the physical address of a PnSEG (n=1,2) address   */
-#define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
-
 #if defined(CONFIG_29BIT) || defined(CONFIG_PMB_FIXED)
 /*
  * Map an address to a certain privileged segment
@@ -60,5 +57,11 @@
 #define P3_ADDR_MAX		P4SEG
 #endif
 
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PMB
+extern int __in_29bit_mode(void);
+#endif /* CONFIG_PMB */
+#endif /* __ASSEMBLY__ */
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
index e8e78137c6f5..b16388d71954 100644
--- a/arch/sh/include/asm/atomic.h
+++ b/arch/sh/include/asm/atomic.h
@@ -78,11 +78,10 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
 #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
-/* Atomic operations are already serializing on SH */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__after_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_inc()	smp_mb()
 
 #include <asm-generic/atomic-long.h>
 #include <asm-generic/atomic64.h>
diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h
index ebe595b7ab1f..98511e4d28cb 100644
--- a/arch/sh/include/asm/bitops.h
+++ b/arch/sh/include/asm/bitops.h
@@ -26,8 +26,8 @@
 /*
  * clear_bit() doesn't provide any barrier for the compiler.
  */
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
 
 #ifdef CONFIG_SUPERH32
 static inline unsigned long ffz(unsigned long word)
diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h
index 46260fcbdf4b..02a19a1c033a 100644
--- a/arch/sh/include/asm/bugs.h
+++ b/arch/sh/include/asm/bugs.h
@@ -14,11 +14,15 @@
 
 #include <asm/processor.h>
 
+extern void select_idle_routine(void);
+
 static void __init check_bugs(void)
 {
 	extern unsigned long loops_per_jiffy;
 	char *p = &init_utsname()->machine[2]; /* "sh" */
 
+	select_idle_routine();
+
 	current_cpu_data.loops_per_jiffy = loops_per_jiffy;
 
 	switch (current_cpu_data.family) {
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index c29918f3c819..dda96eb3e7c0 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -42,6 +42,7 @@ extern void flush_cache_page(struct vm_area_struct *vma,
 				unsigned long addr, unsigned long pfn);
 extern void flush_cache_range(struct vm_area_struct *vma,
 				 unsigned long start, unsigned long end);
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *page);
 extern void flush_icache_range(unsigned long start, unsigned long end);
 extern void flush_icache_page(struct vm_area_struct *vma,
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
index 69d56dd4c968..87ced133a363 100644
--- a/arch/sh/include/asm/dma-mapping.h
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -1,219 +1,108 @@
 #ifndef __ASM_SH_DMA_MAPPING_H
 #define __ASM_SH_DMA_MAPPING_H
 
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-debug.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
+extern struct dma_map_ops *dma_ops;
+extern void no_iommu_init(void);
+
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+	return dma_ops;
+}
+
 #include <asm-generic/dma-coherent.h>
+#include <asm-generic/dma-mapping-common.h>
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
 
-extern struct bus_type pci_bus_type;
+	if (ops->dma_supported)
+		return ops->dma_supported(dev, mask);
 
-#define dma_supported(dev, mask)	(1)
+	return 1;
+}
 
 static inline int dma_set_mask(struct device *dev, u64 mask)
 {
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
 	if (!dev->dma_mask || !dma_supported(dev, mask))
 		return -EIO;
+	if (ops->set_dma_mask)
+		return ops->set_dma_mask(dev, mask);
 
 	*dev->dma_mask = mask;
 
 	return 0;
 }
 
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t flag);
-
-void dma_free_coherent(struct device *dev, size_t size,
-		       void *vaddr, dma_addr_t dma_handle);
-
 void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		    enum dma_data_direction dir);
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h) (1)
-
-static inline dma_addr_t dma_map_single(struct device *dev,
-					void *ptr, size_t size,
-					enum dma_data_direction dir)
-{
-	dma_addr_t addr = virt_to_phys(ptr);
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-	if (dev->bus == &pci_bus_type)
-		return addr;
-#endif
-	dma_cache_sync(dev, ptr, size, dir);
-
-	debug_dma_map_page(dev, virt_to_page(ptr),
-			   (unsigned long)ptr & ~PAGE_MASK, size,
-			   dir, addr, true);
-
-	return addr;
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
-				    size_t size, enum dma_data_direction dir)
-{
-	debug_dma_unmap_page(dev, addr, size, dir, true);
-}
 
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; i++) {
-#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
+#ifdef CONFIG_DMA_COHERENT
+#define dma_is_consistent(d, h) (1)
+#else
+#define dma_is_consistent(d, h) (0)
 #endif
-		sg[i].dma_address = sg_phys(&sg[i]);
-		sg[i].dma_length = sg[i].length;
-	}
 
-	debug_dma_map_sg(dev, sg, nents, i, dir);
-
-	return nents;
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction dir)
-{
-	debug_dma_unmap_sg(dev, sg, nents, dir);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction dir)
-{
-	return dma_map_single(dev, page_address(page) + offset, size, dir);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size, enum dma_data_direction dir)
-{
-	dma_unmap_single(dev, dma_address, size, dir);
-}
-
-static inline void __dma_sync_single(struct device *dev, dma_addr_t dma_handle,
-				   size_t size, enum dma_data_direction dir)
+static inline int dma_get_cache_alignment(void)
 {
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-	if (dev->bus == &pci_bus_type)
-		return;
-#endif
-	dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir);
+	/*
+	 * Each processor family will define its own L1_CACHE_SHIFT,
+	 * L1_CACHE_BYTES wraps to this, so this is always safe.
+	 */
+	return L1_CACHE_BYTES;
 }
 
-static inline void dma_sync_single_range(struct device *dev,
-					 dma_addr_t dma_handle,
-					 unsigned long offset, size_t size,
-					 enum dma_data_direction dir)
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-	if (dev->bus == &pci_bus_type)
-		return;
-#endif
-	dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir);
-}
+	struct dma_map_ops *ops = get_dma_ops(dev);
 
-static inline void __dma_sync_sg(struct device *dev, struct scatterlist *sg,
-			       int nelems, enum dma_data_direction dir)
-{
-	int i;
+	if (ops->mapping_error)
+		return ops->mapping_error(dev, dma_addr);
 
-	for (i = 0; i < nelems; i++) {
-#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
-#endif
-		sg[i].dma_address = sg_phys(&sg[i]);
-		sg[i].dma_length = sg[i].length;
-	}
+	return dma_addr == 0;
 }
 
-static inline void dma_sync_single_for_cpu(struct device *dev,
-					   dma_addr_t dma_handle, size_t size,
-					   enum dma_data_direction dir)
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t gfp)
 {
-	__dma_sync_single(dev, dma_handle, size, dir);
-	debug_dma_sync_single_for_cpu(dev, dma_handle, size, dir);
-}
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	void *memory;
 
-static inline void dma_sync_single_for_device(struct device *dev,
-					      dma_addr_t dma_handle,
-					      size_t size,
-					      enum dma_data_direction dir)
-{
-	__dma_sync_single(dev, dma_handle, size, dir);
-	debug_dma_sync_single_for_device(dev, dma_handle, size, dir);
-}
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &memory))
+		return memory;
+	if (!ops->alloc_coherent)
+		return NULL;
 
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-						 dma_addr_t dma_handle,
-						 unsigned long offset,
-						 size_t size,
-						 enum dma_data_direction direction)
-{
-	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
-	debug_dma_sync_single_range_for_cpu(dev, dma_handle,
-					    offset, size, direction);
-}
+	memory = ops->alloc_coherent(dev, size, dma_handle, gfp);
+	debug_dma_alloc_coherent(dev, size, *dma_handle, memory);
 
-static inline void dma_sync_single_range_for_device(struct device *dev,
-						    dma_addr_t dma_handle,
-						    unsigned long offset,
-						    size_t size,
-						    enum dma_data_direction direction)
-{
-	dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
-	debug_dma_sync_single_range_for_device(dev, dma_handle,
-					       offset, size, direction);
+	return memory;
 }
 
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-				       struct scatterlist *sg, int nelems,
-				       enum dma_data_direction dir)
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *vaddr, dma_addr_t dma_handle)
 {
-	__dma_sync_sg(dev, sg, nelems, dir);
-	debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
-}
+	struct dma_map_ops *ops = get_dma_ops(dev);
 
-static inline void dma_sync_sg_for_device(struct device *dev,
-					  struct scatterlist *sg, int nelems,
-					  enum dma_data_direction dir)
-{
-	__dma_sync_sg(dev, sg, nelems, dir);
-	debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
-}
+	WARN_ON(irqs_disabled());	/* for portability */
 
-static inline int dma_get_cache_alignment(void)
-{
-	/*
-	 * Each processor family will define its own L1_CACHE_SHIFT,
-	 * L1_CACHE_BYTES wraps to this, so this is always safe.
-	 */
-	return L1_CACHE_BYTES;
-}
+	if (dma_release_from_coherent(dev, get_order(size), vaddr))
+		return;
 
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return dma_addr == 0;
+	debug_dma_free_coherent(dev, size, vaddr, dma_handle);
+	if (ops->free_coherent)
+		ops->free_coherent(dev, size, vaddr, dma_handle);
 }
 
-#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-
-extern int
-dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-			    dma_addr_t device_addr, size_t size, int flags);
-
-extern void
-dma_release_declared_memory(struct device *dev);
-
-extern void *
-dma_mark_declared_memory_occupied(struct device *dev,
-				  dma_addr_t device_addr, size_t size);
+/* arch/sh/mm/consistent.c */
+extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
+					dma_addr_t *dma_addr, gfp_t flag);
+extern void dma_generic_free_coherent(struct device *dev, size_t size,
+				      void *vaddr, dma_addr_t dma_handle);
 
 #endif /* __ASM_SH_DMA_MAPPING_H */
diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
index ced6795891a6..bdccbbfdc0bd 100644
--- a/arch/sh/include/asm/dwarf.h
+++ b/arch/sh/include/asm/dwarf.h
@@ -194,6 +194,12 @@
 #define DWARF_ARCH_RA_REG	17
 
 #ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <linux/bug.h>
+#include <linux/list.h>
+#include <linux/module.h>
+
 /*
  * Read either the frame pointer (r14) or the stack pointer (r15).
  * NOTE: this MUST be inlined.
@@ -241,6 +247,12 @@ struct dwarf_cie {
 
 	unsigned long flags;
 #define DWARF_CIE_Z_AUGMENTATION	(1 << 0)
+
+	/*
+	 * 'mod' will be non-NULL if this CIE came from a module's
+	 * .eh_frame section.
+	 */
+	struct module *mod;
 };
 
 /**
@@ -255,6 +267,12 @@ struct dwarf_fde {
 	unsigned char *instructions;
 	unsigned char *end;
 	struct list_head link;
+
+	/*
+	 * 'mod' will be non-NULL if this FDE came from a module's
+	 * .eh_frame section.
+	 */
+	struct module *mod;
 };
 
 /**
@@ -364,6 +382,12 @@ static inline unsigned int DW_CFA_operand(unsigned long insn)
 
 extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
 					      struct dwarf_frame *);
+extern void dwarf_free_frame(struct dwarf_frame *);
+
+extern int module_dwarf_finalize(const Elf_Ehdr *, const Elf_Shdr *,
+				 struct module *);
+extern void module_dwarf_cleanup(struct module *);
+
 #endif /* !__ASSEMBLY__ */
 
 #define CFI_STARTPROC	.cfi_startproc
@@ -391,6 +415,10 @@ extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
 static inline void dwarf_unwinder_init(void)
 {
 }
+
+#define module_dwarf_finalize(hdr, sechdrs, me)	(0)
+#define module_dwarf_cleanup(mod)		do { } while (0)
+
 #endif
 
 #endif /* CONFIG_DWARF_UNWINDER */
diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h
index 721fcc4d5e98..5ac1e40a511c 100644
--- a/arch/sh/include/asm/fixmap.h
+++ b/arch/sh/include/asm/fixmap.h
@@ -14,9 +14,9 @@
 #define _ASM_FIXMAP_H
 
 #include <linux/kernel.h>
+#include <linux/threads.h>
 #include <asm/page.h>
 #ifdef CONFIG_HIGHMEM
-#include <linux/threads.h>
 #include <asm/kmap_types.h>
 #endif
 
@@ -46,9 +46,15 @@
  * fix-mapped?
  */
 enum fixed_addresses {
-#define FIX_N_COLOURS 16
+	/*
+	 * The FIX_CMAP entries are used by kmap_coherent() to get virtual
+	 * addresses which are of a known color, and so their values are
+	 * important. __fix_to_virt(FIX_CMAP_END - n) must give an address
+	 * which is the same color as a page (n<<PAGE_SHIFT).
+	 */
+#define FIX_N_COLOURS 8
 	FIX_CMAP_BEGIN,
-	FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS,
+	FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS) - 1,
 	FIX_UNCACHED,
 #ifdef CONFIG_HIGHMEM
 	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h
index 1d3aee04b5cc..fb6bbb9b1cc8 100644
--- a/arch/sh/include/asm/fpu.h
+++ b/arch/sh/include/asm/fpu.h
@@ -18,16 +18,15 @@ static inline void grab_fpu(struct pt_regs *regs)
 
 struct task_struct;
 
-extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs);
+extern void save_fpu(struct task_struct *__tsk);
+void fpu_state_restore(struct pt_regs *regs);
 #else
 
+#define save_fpu(tsk)		do { } while (0)
 #define release_fpu(regs)	do { } while (0)
 #define grab_fpu(regs)		do { } while (0)
+#define fpu_state_restore(regs)	do { } while (0)
 
-static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
-	clear_tsk_thread_flag(tsk, TIF_USEDFPU);
-}
 #endif
 
 struct user_regset;
@@ -39,19 +38,28 @@ extern int fpregs_get(struct task_struct *target,
 		      unsigned int pos, unsigned int count,
 		      void *kbuf, void __user *ubuf);
 
+static inline void __unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
+		save_fpu(tsk);
+		release_fpu(regs);
+	} else
+		tsk->fpu_counter = 0;
+}
+
 static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
 {
 	preempt_disable();
-	if (test_tsk_thread_flag(tsk, TIF_USEDFPU))
-		save_fpu(tsk, regs);
+	__unlazy_fpu(tsk, regs);
 	preempt_enable();
 }
 
 static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
 {
 	preempt_disable();
-	if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {
-		clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
 		release_fpu(regs);
 	}
 	preempt_enable();
diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h
index 12f3a31f20af..13e9966464c2 100644
--- a/arch/sh/include/asm/ftrace.h
+++ b/arch/sh/include/asm/ftrace.h
@@ -35,4 +35,21 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr)
 #endif /* __ASSEMBLY__ */
 #endif /* CONFIG_FUNCTION_TRACER */
 
+#ifndef __ASSEMBLY__
+
+/* arch/sh/kernel/return_address.c */
+extern void *return_address(unsigned int);
+
+#define HAVE_ARCH_CALLER_ADDR
+
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)return_address(1))
+#define CALLER_ADDR2 ((unsigned long)return_address(2))
+#define CALLER_ADDR3 ((unsigned long)return_address(3))
+#define CALLER_ADDR4 ((unsigned long)return_address(4))
+#define CALLER_ADDR5 ((unsigned long)return_address(5))
+#define CALLER_ADDR6 ((unsigned long)return_address(6))
+
+#endif /* __ASSEMBLY__ */
+
 #endif /* __ASM_SH_FTRACE_H */
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
index 61f93da2c62e..f8d9a731e903 100644
--- a/arch/sh/include/asm/gpio.h
+++ b/arch/sh/include/asm/gpio.h
@@ -20,7 +20,7 @@
 #endif
 
 #define ARCH_NR_GPIOS 512
-#include <asm-generic/gpio.h>
+#include <linux/sh_pfc.h>
 
 #ifdef CONFIG_GPIOLIB
 
@@ -53,84 +53,4 @@ static inline int irq_to_gpio(unsigned int irq)
 
 #endif /* CONFIG_GPIOLIB */
 
-typedef unsigned short pinmux_enum_t;
-typedef unsigned short pinmux_flag_t;
-
-#define PINMUX_TYPE_NONE            0
-#define PINMUX_TYPE_FUNCTION        1
-#define PINMUX_TYPE_GPIO            2
-#define PINMUX_TYPE_OUTPUT          3
-#define PINMUX_TYPE_INPUT           4
-#define PINMUX_TYPE_INPUT_PULLUP    5
-#define PINMUX_TYPE_INPUT_PULLDOWN  6
-
-#define PINMUX_FLAG_TYPE            (0x7)
-#define PINMUX_FLAG_WANT_PULLUP     (1 << 3)
-#define PINMUX_FLAG_WANT_PULLDOWN   (1 << 4)
-
-#define PINMUX_FLAG_DBIT_SHIFT      5
-#define PINMUX_FLAG_DBIT            (0x1f << PINMUX_FLAG_DBIT_SHIFT)
-#define PINMUX_FLAG_DREG_SHIFT      10
-#define PINMUX_FLAG_DREG            (0x3f << PINMUX_FLAG_DREG_SHIFT)
-
-struct pinmux_gpio {
-	pinmux_enum_t enum_id;
-	pinmux_flag_t flags;
-};
-
-#define PINMUX_GPIO(gpio, data_or_mark) [gpio] = { data_or_mark }
-#define PINMUX_DATA(data_or_mark, ids...) data_or_mark, ids, 0
-
-struct pinmux_cfg_reg {
-	unsigned long reg, reg_width, field_width;
-	unsigned long *cnt;
-	pinmux_enum_t *enum_ids;
-};
-
-#define PINMUX_CFG_REG(name, r, r_width, f_width) \
-	.reg = r, .reg_width = r_width, .field_width = f_width,		\
-	.cnt = (unsigned long [r_width / f_width]) {}, \
-	.enum_ids = (pinmux_enum_t [(r_width / f_width) * (1 << f_width)]) \
-
-struct pinmux_data_reg {
-	unsigned long reg, reg_width, reg_shadow;
-	pinmux_enum_t *enum_ids;
-};
-
-#define PINMUX_DATA_REG(name, r, r_width) \
-	.reg = r, .reg_width = r_width,	\
-	.enum_ids = (pinmux_enum_t [r_width]) \
-
-struct pinmux_range {
-	pinmux_enum_t begin;
-	pinmux_enum_t end;
-	pinmux_enum_t force;
-};
-
-struct pinmux_info {
-	char *name;
-	pinmux_enum_t reserved_id;
-	struct pinmux_range data;
-	struct pinmux_range input;
-	struct pinmux_range input_pd;
-	struct pinmux_range input_pu;
-	struct pinmux_range output;
-	struct pinmux_range mark;
-	struct pinmux_range function;
-
-	unsigned first_gpio, last_gpio;
-
-	struct pinmux_gpio *gpios;
-	struct pinmux_cfg_reg *cfg_regs;
-	struct pinmux_data_reg *data_regs;
-
-	pinmux_enum_t *gpio_data;
-	unsigned int gpio_data_size;
-
-	unsigned long *gpio_in_use;
-	struct gpio_chip chip;
-};
-
-int register_pinmux(struct pinmux_info *pip);
-
 #endif /* __ASM_SH_GPIO_H */
diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h
index a5be4afa790b..48b191313a99 100644
--- a/arch/sh/include/asm/hardirq.h
+++ b/arch/sh/include/asm/hardirq.h
@@ -1,9 +1,16 @@
 #ifndef __ASM_SH_HARDIRQ_H
 #define __ASM_SH_HARDIRQ_H
 
-extern void ack_bad_irq(unsigned int irq);
-#define ack_bad_irq ack_bad_irq
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned int __nmi_count;		/* arch dependent */
+} ____cacheline_aligned irq_cpustat_t;
 
-#include <asm-generic/hardirq.h>
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(unsigned int irq);
 
 #endif /* __ASM_SH_HARDIRQ_H */
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 5be45ea4dfec..512cd3e9d0ca 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -90,15 +90,11 @@
 #define ctrl_outl		__raw_writel
 #define ctrl_outq		__raw_writeq
 
+extern unsigned long generic_io_base;
+
 static inline void ctrl_delay(void)
 {
-#ifdef CONFIG_CPU_SH4
-	__raw_readw(CCN_PVR);
-#elif defined(P2SEG)
-	__raw_readw(P2SEG);
-#else
-#error "Need a dummy address for delay"
-#endif
+	__raw_readw(generic_io_base);
 }
 
 #define __BUILD_MEMORY_STRING(bwlq, type)				\
@@ -186,8 +182,6 @@ __BUILD_MEMORY_STRING(q, u64)
 
 #define IO_SPACE_LIMIT 0xffffffff
 
-extern unsigned long generic_io_base;
-
 /*
  * This function provides a method for the generic case where a
  * board-specific ioport_map simply needs to return the port + some
@@ -246,7 +240,7 @@ void __iounmap(void __iomem *addr);
 static inline void __iomem *
 __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 {
-#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED)
+#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) && !defined(CONFIG_PMB)
 	unsigned long last_addr = offset + size - 1;
 #endif
 	void __iomem *ret;
@@ -255,7 +249,7 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 	if (ret)
 		return ret;
 
-#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED)
+#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) && !defined(CONFIG_PMB)
 	/*
 	 * For P1 and P2 space this is trivial, as everything is already
 	 * mapped. Uncached access for P1 addresses are done through P2.
diff --git a/arch/sh/include/asm/irqflags.h b/arch/sh/include/asm/irqflags.h
index 46e71da5be6b..a741153b41c2 100644
--- a/arch/sh/include/asm/irqflags.h
+++ b/arch/sh/include/asm/irqflags.h
@@ -1,34 +1,9 @@
 #ifndef __ASM_SH_IRQFLAGS_H
 #define __ASM_SH_IRQFLAGS_H
 
-#ifdef CONFIG_SUPERH32
-#include "irqflags_32.h"
-#else
-#include "irqflags_64.h"
-#endif
+#define RAW_IRQ_DISABLED	0xf0
+#define RAW_IRQ_ENABLED		0x00
 
-#define raw_local_save_flags(flags) \
-		do { (flags) = __raw_local_save_flags(); } while (0)
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
-	return (flags != 0);
-}
-
-static inline int raw_irqs_disabled(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	return raw_irqs_disabled_flags(flags);
-}
-
-#define raw_local_irq_save(flags) \
-		do { (flags) = __raw_local_irq_save(); } while (0)
-
-static inline void raw_local_irq_restore(unsigned long flags)
-{
-	if ((flags & 0xf0) != 0xf0)
-		raw_local_irq_enable();
-}
+#include <asm-generic/irqflags.h>
 
 #endif /* __ASM_SH_IRQFLAGS_H */
diff --git a/arch/sh/include/asm/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h
deleted file mode 100644
index 60218f541340..000000000000
--- a/arch/sh/include/asm/irqflags_32.h
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifndef __ASM_SH_IRQFLAGS_32_H
-#define __ASM_SH_IRQFLAGS_32_H
-
-static inline void raw_local_irq_enable(void)
-{
-	unsigned long __dummy0, __dummy1;
-
-	__asm__ __volatile__ (
-		"stc	sr, %0\n\t"
-		"and	%1, %0\n\t"
-#ifdef CONFIG_CPU_HAS_SR_RB
-		"stc	r6_bank, %1\n\t"
-		"or	%1, %0\n\t"
-#endif
-		"ldc	%0, sr\n\t"
-		: "=&r" (__dummy0), "=r" (__dummy1)
-		: "1" (~0x000000f0)
-		: "memory"
-	);
-}
-
-static inline void raw_local_irq_disable(void)
-{
-	unsigned long flags;
-
-	__asm__ __volatile__ (
-		"stc	sr, %0\n\t"
-		"or	#0xf0, %0\n\t"
-		"ldc	%0, sr\n\t"
-		: "=&z" (flags)
-		: /* no inputs */
-		: "memory"
-	);
-}
-
-static inline void set_bl_bit(void)
-{
-	unsigned long __dummy0, __dummy1;
-
-	__asm__ __volatile__ (
-		"stc	sr, %0\n\t"
-		"or	%2, %0\n\t"
-		"and	%3, %0\n\t"
-		"ldc	%0, sr\n\t"
-		: "=&r" (__dummy0), "=r" (__dummy1)
-		: "r" (0x10000000), "r" (0xffffff0f)
-		: "memory"
-	);
-}
-
-static inline void clear_bl_bit(void)
-{
-	unsigned long __dummy0, __dummy1;
-
-	__asm__ __volatile__ (
-		"stc	sr, %0\n\t"
-		"and	%2, %0\n\t"
-		"ldc	%0, sr\n\t"
-		: "=&r" (__dummy0), "=r" (__dummy1)
-		: "1" (~0x10000000)
-		: "memory"
-	);
-}
-
-static inline unsigned long __raw_local_save_flags(void)
-{
-	unsigned long flags;
-
-	__asm__ __volatile__ (
-		"stc	sr, %0\n\t"
-		"and	#0xf0, %0\n\t"
-		: "=&z" (flags)
-		: /* no inputs */
-		: "memory"
-	);
-
-	return flags;
-}
-
-static inline unsigned long __raw_local_irq_save(void)
-{
-	unsigned long flags, __dummy;
-
-	__asm__ __volatile__ (
-		"stc	sr, %1\n\t"
-		"mov	%1, %0\n\t"
-		"or	#0xf0, %0\n\t"
-		"ldc	%0, sr\n\t"
-		"mov	%1, %0\n\t"
-		"and	#0xf0, %0\n\t"
-		: "=&z" (flags), "=&r" (__dummy)
-		: /* no inputs */
-		: "memory"
-	);
-
-	return flags;
-}
-
-#endif /* __ASM_SH_IRQFLAGS_32_H */
diff --git a/arch/sh/include/asm/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h
deleted file mode 100644
index 88f65222c1d4..000000000000
--- a/arch/sh/include/asm/irqflags_64.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef __ASM_SH_IRQFLAGS_64_H
-#define __ASM_SH_IRQFLAGS_64_H
-
-#include <cpu/registers.h>
-
-#define SR_MASK_LL	0x00000000000000f0LL
-#define SR_BL_LL	0x0000000010000000LL
-
-static inline void raw_local_irq_enable(void)
-{
-	unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "and	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-}
-
-static inline void raw_local_irq_disable(void)
-{
-	unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "or	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-}
-
-static inline void set_bl_bit(void)
-{
-	unsigned long long __dummy0, __dummy1 = SR_BL_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "or	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-
-}
-
-static inline void clear_bl_bit(void)
-{
-	unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "and	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-}
-
-static inline unsigned long __raw_local_save_flags(void)
-{
-	unsigned long long __dummy = SR_MASK_LL;
-	unsigned long flags;
-
-	__asm__ __volatile__ (
-		"getcon	" __SR ", %0\n\t"
-		"and	%0, %1, %0"
-		: "=&r" (flags)
-		: "r" (__dummy));
-
-	return flags;
-}
-
-static inline unsigned long __raw_local_irq_save(void)
-{
-	unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
-	unsigned long flags;
-
-	__asm__ __volatile__ (
-		"getcon	" __SR ", %1\n\t"
-		"or	%1, r63, %0\n\t"
-		"or	%1, %2, %1\n\t"
-		"putcon	%1, " __SR "\n\t"
-		"and	%0, %2, %0"
-		: "=&r" (flags), "=&r" (__dummy0)
-		: "r" (__dummy1));
-
-	return flags;
-}
-
-#endif /* __ASM_SH_IRQFLAGS_64_H */
diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h
index f5963037c9d6..c7426ad9926e 100644
--- a/arch/sh/include/asm/mmu.h
+++ b/arch/sh/include/asm/mmu.h
@@ -7,12 +7,16 @@
 #define PMB_PASCR		0xff000070
 #define PMB_IRMCR		0xff000078
 
+#define PASCR_SE		0x80000000
+
 #define PMB_ADDR		0xf6100000
 #define PMB_DATA		0xf7100000
 #define PMB_ENTRY_MAX		16
 #define PMB_E_MASK		0x0000000f
 #define PMB_E_SHIFT		8
 
+#define PMB_PFN_MASK		0xff000000
+
 #define PMB_SZ_16M		0x00000000
 #define PMB_SZ_64M		0x00000010
 #define PMB_SZ_128M		0x00000080
@@ -62,17 +66,10 @@ struct pmb_entry {
 };
 
 /* arch/sh/mm/pmb.c */
-int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
-		    unsigned long flags, int *entry);
-int set_pmb_entry(struct pmb_entry *pmbe);
-void clear_pmb_entry(struct pmb_entry *pmbe);
-struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
-			    unsigned long flags);
-void pmb_free(struct pmb_entry *pmbe);
 long pmb_remap(unsigned long virt, unsigned long phys,
 	       unsigned long size, unsigned long flags);
 void pmb_unmap(unsigned long addr);
+int pmb_init(void);
 #endif /* __ASSEMBLY__ */
 
 #endif /* __MMU_H */
-
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index 4163950cd1c6..67f3999b544e 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -3,8 +3,6 @@
 
 #ifdef __KERNEL__
 
-#include <linux/dma-mapping.h>
-
 /* Can be used to override the logic in pci_scan_bus for skipping
    already-configured bus numbers - to be used for buggy BIOSes
    or architectures with incomplete PCI setup by the loader */
@@ -54,30 +52,18 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  * address space.  The networking and block device layers use
  * this boolean for bounce buffer decisions.
  */
-#define PCI_DMA_BUS_IS_PHYS	(1)
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <asm/scatterlist.h>
-#include <linux/string.h>
-#include <asm/io.h>
+#define PCI_DMA_BUS_IS_PHYS	(dma_ops->is_phys)
 
 /* pci_unmap_{single,page} being a nop depends upon the
  * configuration.
  */
-#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
+#ifdef CONFIG_DMA_NONCOHERENT
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
 #else
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
 #define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
diff --git a/arch/sh/include/asm/perf_event.h b/arch/sh/include/asm/perf_event.h
index 11a302297ab7..3d0c9f36d150 100644
--- a/arch/sh/include/asm/perf_event.h
+++ b/arch/sh/include/asm/perf_event.h
@@ -1,8 +1,35 @@
 #ifndef __ASM_SH_PERF_EVENT_H
 #define __ASM_SH_PERF_EVENT_H
 
-/* SH only supports software events through this interface. */
-static inline void set_perf_event_pending(void) {}
+struct hw_perf_event;
+
+#define MAX_HWEVENTS	2
+
+struct sh_pmu {
+	const char	*name;
+	unsigned int	num_events;
+	void		(*disable_all)(void);
+	void		(*enable_all)(void);
+	void		(*enable)(struct hw_perf_event *, int);
+	void		(*disable)(struct hw_perf_event *, int);
+	u64		(*read)(int);
+	int		(*event_map)(int);
+	unsigned int	max_events;
+	unsigned long	raw_event_mask;
+	const int	(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+				       [PERF_COUNT_HW_CACHE_OP_MAX]
+				       [PERF_COUNT_HW_CACHE_RESULT_MAX];
+};
+
+/* arch/sh/kernel/perf_event.c */
+extern int register_sh_pmu(struct sh_pmu *);
+extern int reserve_pmc_hardware(void);
+extern void release_pmc_hardware(void);
+
+static inline void set_perf_event_pending(void)
+{
+	/* Nothing to see here, move along. */
+}
 
 #define PERF_EVENT_INDEX_OFFSET	0
 
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index 4f3efa7d5a64..ba3046e4f06f 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -75,13 +75,31 @@ static inline unsigned long long neff_sign_extend(unsigned long val)
 #define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
 #define FIRST_USER_ADDRESS	0
 
-#ifdef CONFIG_32BIT
-#define PHYS_ADDR_MASK		0xffffffff
+#define PHYS_ADDR_MASK29		0x1fffffff
+#define PHYS_ADDR_MASK32		0xffffffff
+
+#ifdef CONFIG_PMB
+static inline unsigned long phys_addr_mask(void)
+{
+	/* Is the MMU in 29bit mode? */
+	if (__in_29bit_mode())
+		return PHYS_ADDR_MASK29;
+
+	return PHYS_ADDR_MASK32;
+}
+#elif defined(CONFIG_32BIT)
+static inline unsigned long phys_addr_mask(void)
+{
+	return PHYS_ADDR_MASK32;
+}
 #else
-#define PHYS_ADDR_MASK		0x1fffffff
+static inline unsigned long phys_addr_mask(void)
+{
+	return PHYS_ADDR_MASK29;
+}
 #endif
 
-#define PTE_PHYS_MASK		(PHYS_ADDR_MASK & PAGE_MASK)
+#define PTE_PHYS_MASK		(phys_addr_mask() & PAGE_MASK)
 #define PTE_FLAGS_MASK		(~(PTE_PHYS_MASK) << PAGE_SHIFT)
 
 #ifdef CONFIG_SUPERH32
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index c0d359ce337b..b35435516203 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -108,7 +108,7 @@ static inline unsigned long copy_ptea_attributes(unsigned long x)
 #define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE)
 #endif
 
-#define _PAGE_FLAGS_HARDWARE_MASK	(PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS))
+#define _PAGE_FLAGS_HARDWARE_MASK	(phys_addr_mask() & ~(_PAGE_CLEAR_FLAGS))
 
 /* Hardware flags, page size encoding */
 #if !defined(CONFIG_MMU)
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index 9a8714945dc9..1f3d6fab660c 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -56,6 +56,7 @@ asmlinkage void __init sh_cpu_init(void);
 #define SR_DSP		0x00001000
 #define SR_IMASK	0x000000f0
 #define SR_FD		0x00008000
+#define SR_MD		0x40000000
 
 /*
  * DSP structure and data
@@ -136,7 +137,7 @@ struct mm_struct;
 extern void release_thread(struct task_struct *);
 
 /* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
+void prepare_to_copy(struct task_struct *tsk);
 
 /*
  * create a kernel thread without removing it from tasklists
diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h
index 327cc2e4c97b..e38d1d4c7f6f 100644
--- a/arch/sh/include/asm/scatterlist.h
+++ b/arch/sh/include/asm/scatterlist.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_SH_SCATTERLIST_H
 #define __ASM_SH_SCATTERLIST_H
 
-#define ISA_DMA_THRESHOLD	PHYS_ADDR_MASK
+#define ISA_DMA_THRESHOLD	phys_addr_mask()
 
 #include <asm-generic/scatterlist.h>
 
diff --git a/arch/sh/include/asm/sh_eth.h b/arch/sh/include/asm/sh_eth.h
index acf99700deed..f739061e2ee4 100644
--- a/arch/sh/include/asm/sh_eth.h
+++ b/arch/sh/include/asm/sh_eth.h
@@ -7,6 +7,7 @@ struct sh_eth_plat_data {
 	int phy;
 	int edmac_endian;
 
+	unsigned char mac_addr[6];
 	unsigned no_ether_link:1;
 	unsigned ether_link_active_low:1;
 };
diff --git a/arch/sh/include/asm/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h
deleted file mode 100644
index 4a65b1e40eab..000000000000
--- a/arch/sh/include/asm/sh_keysc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ASM_KEYSC_H__
-#define __ASM_KEYSC_H__
-
-#define SH_KEYSC_MAXKEYS 30
-
-struct sh_keysc_info {
-	enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode;
-	int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */
-	int delay;
-	int kycr2_delay;
-	int keycodes[SH_KEYSC_MAXKEYS];
-};
-
-#endif /* __ASM_KEYSC_H__ */
diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h
index 5c8ea28ff7a4..fe9c2a1ad047 100644
--- a/arch/sh/include/asm/suspend.h
+++ b/arch/sh/include/asm/suspend.h
@@ -2,6 +2,7 @@
 #define _ASM_SH_SUSPEND_H
 
 #ifndef __ASSEMBLY__
+#include <linux/notifier.h>
 static inline int arch_prepare_suspend(void) { return 0; }
 
 #include <asm/ptrace.h>
@@ -19,6 +20,69 @@ void sh_mobile_setup_cpuidle(void);
 static inline void sh_mobile_setup_cpuidle(void) {}
 #endif
 
+/* notifier chains for pre/post sleep hooks */
+extern struct atomic_notifier_head sh_mobile_pre_sleep_notifier_list;
+extern struct atomic_notifier_head sh_mobile_post_sleep_notifier_list;
+
+/* priority levels for notifiers */
+#define SH_MOBILE_SLEEP_BOARD	0
+#define SH_MOBILE_SLEEP_CPU	1
+#define SH_MOBILE_PRE(x)	(x)
+#define SH_MOBILE_POST(x)	(-(x))
+
+/* board code registration function for self-refresh assembly snippets */
+void sh_mobile_register_self_refresh(unsigned long flags,
+				     void *pre_start, void *pre_end,
+				     void *post_start, void *post_end);
+
+/* register structure for address/data information */
+struct sh_sleep_regs {
+	unsigned long stbcr;
+	unsigned long bar;
+
+	/* MMU */
+	unsigned long pteh;
+	unsigned long ptel;
+	unsigned long ttb;
+	unsigned long tea;
+	unsigned long mmucr;
+	unsigned long ptea;
+	unsigned long pascr;
+	unsigned long irmcr;
+
+	/* Cache */
+	unsigned long ccr;
+	unsigned long ramcr;
+};
+
+/* data area for low-level sleep code */
+struct sh_sleep_data {
+	/* current sleep mode (SUSP_SH_...) */
+	unsigned long mode;
+
+	/* addresses of board specific self-refresh snippets */
+	unsigned long sf_pre;
+	unsigned long sf_post;
+
+	/* address of resume code */
+	unsigned long resume;
+
+	/* register state saved and restored by the assembly code */
+	unsigned long vbr;
+	unsigned long spc;
+	unsigned long sr;
+	unsigned long sp;
+
+	/* structure for keeping register addresses */
+	struct sh_sleep_regs addr;
+
+	/* structure for saving/restoring register state */
+	struct sh_sleep_regs data;
+};
+
+/* a bitmap of supported sleep modes (SUSP_SH..) */
+extern unsigned long sh_mobile_sleep_supported;
+
 #endif
 
 /* flags passed to assembly suspend code */
@@ -27,5 +91,6 @@ static inline void sh_mobile_setup_cpuidle(void) {}
 #define SUSP_SH_RSTANDBY	(1 << 2) /* SH-Mobile R-standby mode */
 #define SUSP_SH_USTANDBY	(1 << 3) /* SH-Mobile U-standby mode */
 #define SUSP_SH_SF		(1 << 4) /* Enable self-refresh */
+#define SUSP_SH_MMU		(1 << 5) /* Save/restore MMU and cache */
 
 #endif /* _ASM_SH_SUSPEND_H */
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index b5c5acdc8c0e..c15415b4b169 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -171,10 +171,6 @@ BUILD_TRAP_HANDLER(fpu_error);
 BUILD_TRAP_HANDLER(fpu_state_restore);
 BUILD_TRAP_HANDLER(nmi);
 
-#ifdef CONFIG_BUG
-extern void handle_BUG(struct pt_regs *);
-#endif
-
 #define arch_align_stack(x) (x)
 
 struct mem_access {
diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
index 607d413f6168..06814f5b59c7 100644
--- a/arch/sh/include/asm/system_32.h
+++ b/arch/sh/include/asm/system_32.h
@@ -232,4 +232,33 @@ asmlinkage void do_exception_error(unsigned long r4, unsigned long r5,
 				   unsigned long r6, unsigned long r7,
 				   struct pt_regs __regs);
 
+static inline void set_bl_bit(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"or	%2, %0\n\t"
+		"and	%3, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "r" (0x10000000), "r" (0xffffff0f)
+		: "memory"
+	);
+}
+
+static inline void clear_bl_bit(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	%2, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "1" (~0x10000000)
+		: "memory"
+	);
+}
+
 #endif /* __ASM_SH_SYSTEM_32_H */
diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h
index 8e4a03e7966c..ab1dd917ea87 100644
--- a/arch/sh/include/asm/system_64.h
+++ b/arch/sh/include/asm/system_64.h
@@ -12,6 +12,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#include <cpu/registers.h>
 #include <asm/processor.h>
 
 /*
@@ -47,4 +48,29 @@ static inline reg_size_t register_align(void *val)
 	return (unsigned long long)(signed long long)(signed long)val;
 }
 
+#define SR_BL_LL	0x0000000010000000LL
+
+static inline void set_bl_bit(void)
+{
+	unsigned long long __dummy0, __dummy1 = SR_BL_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+
+}
+
+static inline void clear_bl_bit(void)
+{
+	unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+}
+
 #endif /* __ASM_SH_SYSTEM_64_H */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index bdeb9d46d17d..1f3d927e2265 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -19,6 +19,7 @@ struct thread_info {
 	struct task_struct	*task;		/* main task structure */
 	struct exec_domain	*exec_domain;	/* execution domain */
 	unsigned long		flags;		/* low level flags */
+	__u32			status;		/* thread synchronous flags */
 	__u32			cpu;
 	int			preempt_count; /* 0 => preemptable, <0 => BUG */
 	mm_segment_t		addr_limit;	/* thread address space */
@@ -50,6 +51,7 @@ struct thread_info {
 	.task		= &tsk,			\
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
+	.status		= 0,			\
 	.cpu		= 0,			\
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
@@ -111,13 +113,11 @@ extern void free_thread_info(struct thread_info *ti);
 #define TIF_SYSCALL_TRACE	0	/* syscall trace active */
 #define TIF_SIGPENDING		1	/* signal pending */
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_RESTORE_SIGMASK	3	/* restore signal mask in do_signal() */
 #define TIF_SINGLESTEP		4	/* singlestepping active */
 #define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
 #define TIF_SECCOMP		6	/* secure computing */
 #define TIF_NOTIFY_RESUME	7	/* callback before returning to user */
 #define TIF_SYSCALL_TRACEPOINT	8	/* for ftrace syscall instrumentation */
-#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		18
 #define TIF_FREEZE		19	/* Freezing for suspend */
@@ -125,13 +125,11 @@ extern void free_thread_info(struct thread_info *ti);
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
-#define _TIF_USEDFPU		(1 << TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
 
@@ -149,13 +147,33 @@ extern void free_thread_info(struct thread_info *ti);
 /* work to do on any return to u-space */
 #define _TIF_ALLWORK_MASK	(_TIF_SYSCALL_TRACE | _TIF_SIGPENDING      | \
 				 _TIF_NEED_RESCHED  | _TIF_SYSCALL_AUDIT   | \
-				 _TIF_SINGLESTEP    | _TIF_RESTORE_SIGMASK | \
-				 _TIF_NOTIFY_RESUME | _TIF_SYSCALL_TRACEPOINT)
+				 _TIF_SINGLESTEP    | _TIF_NOTIFY_RESUME   | \
+				 _TIF_SYSCALL_TRACEPOINT)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		(_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
 				 _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
 
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_RESTORE_SIGMASK	0x0001	/* restore signal mask in do_signal() */
+#define TS_USEDFPU		0x0002	/* FPU used by this task this quantum */
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
 #endif /* __KERNEL__ */
 
 #endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index 65e7bd2f2240..37cdadd975ac 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -40,6 +40,14 @@
 
 #endif
 
+#define mc_capable()    (1)
+
+const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
+
+extern cpumask_t cpu_core_map[NR_CPUS];
+
+#define topology_core_cpumask(cpu)	(&cpu_core_map[cpu])
+
 #include <asm-generic/topology.h>
 
 #endif /* _ASM_SH_TOPOLOGY_H */
diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h
index 4ca4b7717371..9bf961684431 100644
--- a/arch/sh/include/asm/ubc.h
+++ b/arch/sh/include/asm/ubc.h
@@ -60,16 +60,5 @@
 #define BRCR_UBDE		(1 << 0)
 #endif
 
-#ifndef __ASSEMBLY__
-/* arch/sh/kernel/cpu/ubc.S */
-extern void ubc_sleep(void);
-
-#ifdef CONFIG_UBC_WAKEUP
-extern void ubc_wakeup(void);
-#else
-#define ubc_wakeup()	do { } while (0)
-#endif
-#endif
-
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_UBC_H */
diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h
index 2fe7cee9e43a..19dfff5c8511 100644
--- a/arch/sh/include/asm/watchdog.h
+++ b/arch/sh/include/asm/watchdog.h
@@ -2,6 +2,8 @@
  * include/asm-sh/watchdog.h
  *
  * Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2009 Siemens AG
+ * Copyright (C) 2009 Valentin Sitdikov
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -61,6 +63,61 @@
 #define WTCSR_CKS_2048	0x06
 #define WTCSR_CKS_4096	0x07
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+/**
+ * 	sh_wdt_read_cnt - Read from Counter
+ * 	Reads back the WTCNT value.
+ */
+static inline __u32 sh_wdt_read_cnt(void)
+{
+	return ctrl_inl(WTCNT_R);
+}
+
+/**
+ *	sh_wdt_write_cnt - Write to Counter
+ *	@val: Value to write
+ *
+ *	Writes the given value @val to the lower byte of the timer counter.
+ *	The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_cnt(__u32 val)
+{
+	ctrl_outl((WTCNT_HIGH << 24) | (__u32)val, WTCNT);
+}
+
+/**
+ *	sh_wdt_write_bst - Write to Counter
+ *	@val: Value to write
+ *
+ *	Writes the given value @val to the lower byte of the timer counter.
+ *	The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_bst(__u32 val)
+{
+	ctrl_outl((WTBST_HIGH << 24) | (__u32)val, WTBST);
+}
+/**
+ * 	sh_wdt_read_csr - Read from Control/Status Register
+ *
+ *	Reads back the WTCSR value.
+ */
+static inline __u32 sh_wdt_read_csr(void)
+{
+	return ctrl_inl(WTCSR_R);
+}
+
+/**
+ * 	sh_wdt_write_csr - Write to Control/Status Register
+ * 	@val: Value to write
+ *
+ * 	Writes the given value @val to the lower byte of the control/status
+ * 	register. The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_csr(__u32 val)
+{
+	ctrl_outl((WTCSR_HIGH << 24) | (__u32)val, WTCSR);
+}
+#else
 /**
  * 	sh_wdt_read_cnt - Read from Counter
  * 	Reads back the WTCNT value.
@@ -103,6 +160,6 @@ static inline void sh_wdt_write_csr(__u8 val)
 {
 	ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
 }
-
+#endif /* CONFIG_CPU_SUBTYPE_SH7785 || CONFIG_CPU_SUBTYPE_SH7780 */
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_WATCHDOG_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h
index 259f6a0ce23d..7672301d0c70 100644
--- a/arch/sh/include/cpu-sh4/cpu/watchdog.h
+++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h
@@ -2,6 +2,8 @@
  * include/asm-sh/cpu-sh4/watchdog.h
  *
  * Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2009 Siemens AG
+ * Copyright (C) 2009 Sitdikov Valentin
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -10,9 +12,20 @@
 #ifndef __ASM_CPU_SH4_WATCHDOG_H
 #define __ASM_CPU_SH4_WATCHDOG_H
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+/* Prefix definition */
+#define WTBST_HIGH	0x55
+/* Register definitions */
+#define WTCNT_R		0xffcc0010 /*WDTCNT*/
+#define WTCSR		0xffcc0004 /*WDTCSR*/
+#define WTCNT		0xffcc0000 /*WDTST*/
+#define WTST		WTCNT
+#define WTBST		0xffcc0008 /*WDTBST*/
+#else
 /* Register definitions */
 #define WTCNT		0xffc00008
 #define WTCSR		0xffc0000c
+#endif
 
 /* Bit definitions */
 #define WTCSR_TME	0x80
diff --git a/arch/sh/include/mach-common/mach/hp6xx.h b/arch/sh/include/mach-common/mach/hp6xx.h
index 0d4165a32dcd..bcc301ac12f4 100644
--- a/arch/sh/include/mach-common/mach/hp6xx.h
+++ b/arch/sh/include/mach-common/mach/hp6xx.h
@@ -29,6 +29,9 @@
 
 #define PKDR_LED_GREEN		0x10
 
+/* HP Palmtop 620lx/660lx speaker on/off */
+#define PKDR_SPEAKER		0x20
+
 #define SCPDR_TS_SCAN_ENABLE	0x20
 #define SCPDR_TS_SCAN_Y		0x02
 #define SCPDR_TS_SCAN_X		0x01
@@ -42,6 +45,7 @@
 #define ADC_CHANNEL_BACKUP	4
 #define ADC_CHANNEL_CHARGE	5
 
+/* HP Jornada 680/690 speaker on/off */
 #define HD64461_GPADR_SPEAKER	0x01
 #define HD64461_GPADR_PCMCIA0	(0x02|0x08)
 
diff --git a/arch/sh/include/mach-common/mach/titan.h b/arch/sh/include/mach-common/mach/titan.h
index 03f3583c8918..4a674d27cbb8 100644
--- a/arch/sh/include/mach-common/mach/titan.h
+++ b/arch/sh/include/mach-common/mach/titan.h
@@ -1,5 +1,5 @@
 /*
- * Platform defintions for Titan
+ * Platform definitions for Titan
  */
 #ifndef _ASM_SH_TITAN_H
 #define _ASM_SH_TITAN_H
diff --git a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
index 8b8e4fa1fee9..cc737b807334 100644
--- a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
+++ b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
@@ -22,13 +22,12 @@ ED 0xff000010, 0x00000004
 LIST "setup clocks"
 ED 0xa4150024, 0x00004000
 ED 0xa4150000, 0x8E003508
-ED 0xa4150004, 0x00000000
 
 WAIT 1
 
 LIST "BSC"
 ED 0xff800020, 0xa5a50000
-ED 0xfec10000, 0x00000013
+ED 0xfec10000, 0x00001013
 ED 0xfec10004, 0x11110400
 ED 0xfec10024, 0x00000440
 
diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
index e971d9a82f4a..16505bfb8a9e 100644
--- a/arch/sh/include/mach-se/mach/se7722.h
+++ b/arch/sh/include/mach-se/mach/se7722.h
@@ -92,18 +92,11 @@
 #define SE7722_FPGA_IRQ_MRSHPC1	3 /* IRQ1 */
 #define SE7722_FPGA_IRQ_MRSHPC2	4 /* IRQ1 */
 #define SE7722_FPGA_IRQ_MRSHPC3	5 /* IRQ1 */
-
 #define SE7722_FPGA_IRQ_NR	6
-#define SE7722_FPGA_IRQ_BASE	110
-
-#define MRSHPC_IRQ3    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3)
-#define MRSHPC_IRQ2    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2)
-#define MRSHPC_IRQ1    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1)
-#define MRSHPC_IRQ0    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0)
-#define SMC_IRQ		(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC)
-#define USB_IRQ		(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB)
 
 /* arch/sh/boards/se/7722/irq.c */
+extern unsigned int se7722_fpga_irq[];
+
 void init_se7722_IRQ(void);
 
 #define __IO_PREFIX		se7722
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index a2d0a40f3848..0471a3eb25ed 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -9,8 +9,12 @@ ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
 endif
 
-obj-y	:= debugtraps.o dumpstack.o idle.o io.o io_generic.o irq.o	\
-	   machvec.o nmi_debug.o process_$(BITS).o ptrace_$(BITS).o	\
+CFLAGS_REMOVE_return_address.o = -pg
+
+obj-y	:= debugtraps.o dma-nommu.o dumpstack.o 			\
+	   idle.o io.o io_generic.o irq.o				\
+	   irq_$(BITS).o machvec.o nmi_debug.o process_$(BITS).o 	\
+	   ptrace_$(BITS).o return_address.o				\
 	   setup.o signal_$(BITS).o sys_sh.o sys_sh$(BITS).o		\
 	   syscalls_$(BITS).o time.o topology.o traps.o			\
 	   traps_$(BITS).o unwinder.o
@@ -28,13 +32,13 @@ obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
-obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
 obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o
 obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
+obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_callchain.o
 
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
 
diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c
index d218e808294e..08a2be775b6c 100644
--- a/arch/sh/kernel/asm-offsets.c
+++ b/arch/sh/kernel/asm-offsets.c
@@ -34,5 +34,28 @@ int main(void)
 	DEFINE(PBE_NEXT, offsetof(struct pbe, next));
 	DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs));
 #endif
+
+	DEFINE(SH_SLEEP_MODE, offsetof(struct sh_sleep_data, mode));
+	DEFINE(SH_SLEEP_SF_PRE, offsetof(struct sh_sleep_data, sf_pre));
+	DEFINE(SH_SLEEP_SF_POST, offsetof(struct sh_sleep_data, sf_post));
+	DEFINE(SH_SLEEP_RESUME, offsetof(struct sh_sleep_data, resume));
+	DEFINE(SH_SLEEP_VBR, offsetof(struct sh_sleep_data, vbr));
+	DEFINE(SH_SLEEP_SPC, offsetof(struct sh_sleep_data, spc));
+	DEFINE(SH_SLEEP_SR, offsetof(struct sh_sleep_data, sr));
+	DEFINE(SH_SLEEP_SP, offsetof(struct sh_sleep_data, sp));
+	DEFINE(SH_SLEEP_BASE_ADDR, offsetof(struct sh_sleep_data, addr));
+	DEFINE(SH_SLEEP_BASE_DATA, offsetof(struct sh_sleep_data, data));
+	DEFINE(SH_SLEEP_REG_STBCR, offsetof(struct sh_sleep_regs, stbcr));
+	DEFINE(SH_SLEEP_REG_BAR, offsetof(struct sh_sleep_regs, bar));
+	DEFINE(SH_SLEEP_REG_PTEH, offsetof(struct sh_sleep_regs, pteh));
+	DEFINE(SH_SLEEP_REG_PTEL, offsetof(struct sh_sleep_regs, ptel));
+	DEFINE(SH_SLEEP_REG_TTB, offsetof(struct sh_sleep_regs, ttb));
+	DEFINE(SH_SLEEP_REG_TEA, offsetof(struct sh_sleep_regs, tea));
+	DEFINE(SH_SLEEP_REG_MMUCR, offsetof(struct sh_sleep_regs, mmucr));
+	DEFINE(SH_SLEEP_REG_PTEA, offsetof(struct sh_sleep_regs, ptea));
+	DEFINE(SH_SLEEP_REG_PASCR, offsetof(struct sh_sleep_regs, pascr));
+	DEFINE(SH_SLEEP_REG_IRMCR, offsetof(struct sh_sleep_regs, irmcr));
+	DEFINE(SH_SLEEP_REG_CCR, offsetof(struct sh_sleep_regs, ccr));
+	DEFINE(SH_SLEEP_REG_RAMCR, offsetof(struct sh_sleep_regs, ramcr));
 	return 0;
 }
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index 3d6b9312dc47..d97c803719ec 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_ARCH_SHMOBILE)	+= shmobile/
 
 # Common interfaces.
 
-obj-$(CONFIG_UBC_WAKEUP)	+= ubc.o
 obj-$(CONFIG_SH_ADC)		+= adc.o
 obj-$(CONFIG_SH_CLK_CPG)	+= clock-cpg.o
 
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index e932ebef4738..89b4b76c0d76 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -75,16 +75,11 @@ static void __init expmask_init(void)
 	/*
 	 * Future proofing.
 	 *
-	 * Disable support for slottable sleep instruction
-	 * and non-nop instructions in the rte delay slot.
+	 * Disable support for slottable sleep instruction, non-nop
+	 * instructions in the rte delay slot, and associative writes to
+	 * the memory-mapped cache array.
 	 */
-	expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP);
-
-	/*
-	 * Enable associative writes to the memory-mapped cache array
-	 * until the cache flush ops have been rewritten.
-	 */
-	expmask |= EXPMASK_MMCAW;
+	expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP | EXPMASK_MMCAW);
 
 	__raw_writel(expmask, EXPMASK);
 	ctrl_barrier();
@@ -311,12 +306,12 @@ asmlinkage void __init sh_cpu_init(void)
 	if (fpu_disabled) {
 		printk("FPU Disabled\n");
 		current_cpu_data.flags &= ~CPU_HAS_FPU;
-		disable_fpu();
 	}
 
 	/* FPU initialization */
+	disable_fpu();
 	if ((current_cpu_data.flags & CPU_HAS_FPU)) {
-		clear_thread_flag(TIF_USEDFPU);
+		current_thread_info()->status &= ~TS_USEDFPU;
 		clear_used_math();
 	}
 
@@ -338,17 +333,6 @@ asmlinkage void __init sh_cpu_init(void)
 	}
 #endif
 
-	/*
-	 * Some brain-damaged loaders decided it would be a good idea to put
-	 * the UBC to sleep. This causes some issues when it comes to things
-	 * like PTRACE_SINGLESTEP or doing hardware watchpoints in GDB.  So ..
-	 * we wake it up and hope that all is well.
-	 */
-#ifdef CONFIG_SUPERH32
-	if (raw_smp_processor_id() == 0)
-		ubc_wakeup();
-#endif
-
 	speculative_execution_init();
 	expmask_init();
 }
diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c
index 6df2fb98eb30..d395ce5740e7 100644
--- a/arch/sh/kernel/cpu/sh2a/fpu.c
+++ b/arch/sh/kernel/cpu/sh2a/fpu.c
@@ -25,14 +25,12 @@
 
 /*
  * Save FPU registers onto task structure.
- * Assume called with FPU enabled (SR.FD=0).
  */
 void
-save_fpu(struct task_struct *tsk, struct pt_regs *regs)
+save_fpu(struct task_struct *tsk)
 {
 	unsigned long dummy;
 
-	clear_tsk_thread_flag(tsk, TIF_USEDFPU);
 	enable_fpu();
 	asm volatile("sts.l	fpul, @-%0\n\t"
 		     "sts.l	fpscr, @-%0\n\t"
@@ -60,7 +58,6 @@ save_fpu(struct task_struct *tsk, struct pt_regs *regs)
 		     : "memory");
 
 	disable_fpu();
-	release_fpu(regs);
 }
 
 static void
@@ -598,31 +595,31 @@ BUILD_TRAP_HANDLER(fpu_error)
 	struct task_struct *tsk = current;
 	TRAP_HANDLER_DECL;
 
-	save_fpu(tsk, regs);
+	__unlazy_fpu(tsk, regs);
 	if (ieee_fpe_handler(regs)) {
 		tsk->thread.fpu.hard.fpscr &=
 			~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
 		grab_fpu(regs);
 		restore_fpu(tsk);
-		set_tsk_thread_flag(tsk, TIF_USEDFPU);
+		task_thread_info(tsk)->status |= TS_USEDFPU;
 		return;
 	}
 
 	force_sig(SIGFPE, tsk);
 }
 
-BUILD_TRAP_HANDLER(fpu_state_restore)
+void fpu_state_restore(struct pt_regs *regs)
 {
 	struct task_struct *tsk = current;
-	TRAP_HANDLER_DECL;
 
 	grab_fpu(regs);
-	if (!user_mode(regs)) {
+	if (unlikely(!user_mode(regs))) {
 		printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
+		BUG();
 		return;
 	}
 
-	if (used_math()) {
+	if (likely(used_math())) {
 		/* Using the FPU again.  */
 		restore_fpu(tsk);
 	} else	{
@@ -630,5 +627,13 @@ BUILD_TRAP_HANDLER(fpu_state_restore)
 		fpu_init();
 		set_used_math();
 	}
-	set_tsk_thread_flag(tsk, TIF_USEDFPU);
+	task_thread_info(tsk)->status |= TS_USEDFPU;
+	tsk->fpu_counter++;
+}
+
+BUILD_TRAP_HANDLER(fpu_state_restore)
+{
+	TRAP_HANDLER_DECL;
+
+	fpu_state_restore(regs);
 }
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index bb407ef0b91e..3f7e2a22c7c2 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -297,41 +297,8 @@ ENTRY(vbr_base)
 !
 	.balign 	256,0,256
 general_exception:
-#ifndef CONFIG_CPU_SUBTYPE_SHX3
 	bra	handle_exception
 	 sts	pr, k3		! save original pr value in k3
-#else
-	mov.l	1f, k4
-	mov.l	@k4, k4
-
-	! Is EXPEVT larger than 0x800?
-	mov	#0x8, k0
-	shll8	k0
-	cmp/hs	k0, k4
-	bf	0f
-
-	! then add 0x580 (k2 is 0xd80 or 0xda0)
-	mov	#0x58, k0
-	shll2	k0
-	shll2	k0
-	add	k0, k4
-0:
-	! Setup stack and save DSP context (k0 contains original r15 on return)
-	bsr	prepare_stack
-	 nop
-
-	! Save registers / Switch to bank 0
-	mov		k4, k2		! keep vector in k2
-	mov.l	1f, k4		! SR bits to clear in k4
-	bsr	save_regs	! needs original pr value in k3
-	 nop
-
-	bra	handle_exception_special
-	 nop
-
-	.align	2
-1:	.long	EXPEVT
-#endif
 
 ! prepare_stack()
 ! - roll back gRB
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index 203b18347b83..3a1dbc709831 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -9,6 +9,11 @@ obj-$(CONFIG_HIBERNATION)		+= $(addprefix ../sh3/, swsusp.o)
 obj-$(CONFIG_SH_FPU)			+= fpu.o softfloat.o
 obj-$(CONFIG_SH_STORE_QUEUES)		+= sq.o
 
+# Perf events
+perf-$(CONFIG_CPU_SUBTYPE_SH7750)	:= perf_event.o
+perf-$(CONFIG_CPU_SUBTYPE_SH7750S)	:= perf_event.o
+perf-$(CONFIG_CPU_SUBTYPE_SH7091)	:= perf_event.o
+
 # CPU subtype setup
 obj-$(CONFIG_CPU_SUBTYPE_SH7750)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7750R)	+= setup-sh7750.o
@@ -27,4 +32,5 @@ endif
 # Additional clocks by subtype
 clock-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= clock-sh4-202.o
 
-obj-y	+= $(clock-y)
+obj-y					+= $(clock-y)
+obj-$(CONFIG_PERF_EVENTS)		+= $(perf-y)
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index e3ea5411da6d..e97857aec8a0 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -41,13 +41,11 @@ static unsigned int fpu_exception_flags;
 
 /*
  * Save FPU registers onto task structure.
- * Assume called with FPU enabled (SR.FD=0).
  */
-void save_fpu(struct task_struct *tsk, struct pt_regs *regs)
+void save_fpu(struct task_struct *tsk)
 {
 	unsigned long dummy;
 
-	clear_tsk_thread_flag(tsk, TIF_USEDFPU);
 	enable_fpu();
 	asm volatile ("sts.l	fpul, @-%0\n\t"
 		      "sts.l	fpscr, @-%0\n\t"
@@ -92,7 +90,6 @@ void save_fpu(struct task_struct *tsk, struct pt_regs *regs)
 		      :"memory");
 
 	disable_fpu();
-	release_fpu(regs);
 }
 
 static void restore_fpu(struct task_struct *tsk)
@@ -285,7 +282,6 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 		/* fcnvsd */
 		struct task_struct *tsk = current;
 
-		save_fpu(tsk, regs);
 		if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR))
 			/* FPU error */
 			denormal_to_double(&tsk->thread.fpu.hard,
@@ -462,7 +458,7 @@ BUILD_TRAP_HANDLER(fpu_error)
 	struct task_struct *tsk = current;
 	TRAP_HANDLER_DECL;
 
-	save_fpu(tsk, regs);
+	__unlazy_fpu(tsk, regs);
 	fpu_exception_flags = 0;
 	if (ieee_fpe_handler(regs)) {
 		tsk->thread.fpu.hard.fpscr &=
@@ -473,7 +469,7 @@ BUILD_TRAP_HANDLER(fpu_error)
 		tsk->thread.fpu.hard.fpscr |= (fpu_exception_flags >> 10);
 		grab_fpu(regs);
 		restore_fpu(tsk);
-		set_tsk_thread_flag(tsk, TIF_USEDFPU);
+		task_thread_info(tsk)->status |= TS_USEDFPU;
 		if ((((tsk->thread.fpu.hard.fpscr & FPSCR_ENABLE_MASK) >> 7) &
 		     (fpu_exception_flags >> 2)) == 0) {
 			return;
@@ -483,18 +479,18 @@ BUILD_TRAP_HANDLER(fpu_error)
 	force_sig(SIGFPE, tsk);
 }
 
-BUILD_TRAP_HANDLER(fpu_state_restore)
+void fpu_state_restore(struct pt_regs *regs)
 {
 	struct task_struct *tsk = current;
-	TRAP_HANDLER_DECL;
 
 	grab_fpu(regs);
-	if (!user_mode(regs)) {
+	if (unlikely(!user_mode(regs))) {
 		printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
+		BUG();
 		return;
 	}
 
-	if (used_math()) {
+	if (likely(used_math())) {
 		/* Using the FPU again.  */
 		restore_fpu(tsk);
 	} else {
@@ -502,5 +498,13 @@ BUILD_TRAP_HANDLER(fpu_state_restore)
 		fpu_init();
 		set_used_math();
 	}
-	set_tsk_thread_flag(tsk, TIF_USEDFPU);
+	task_thread_info(tsk)->status |= TS_USEDFPU;
+	tsk->fpu_counter++;
+}
+
+BUILD_TRAP_HANDLER(fpu_state_restore)
+{
+	TRAP_HANDLER_DECL;
+
+	fpu_state_restore(regs);
 }
diff --git a/arch/sh/kernel/cpu/sh4/perf_event.c b/arch/sh/kernel/cpu/sh4/perf_event.c
new file mode 100644
index 000000000000..7f9ecc9c2d02
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/perf_event.c
@@ -0,0 +1,253 @@
+/*
+ * Performance events support for SH7750-style performance counters
+ *
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/perf_event.h>
+#include <asm/processor.h>
+
+#define PM_CR_BASE	0xff000084	/* 16-bit */
+#define PM_CTR_BASE	0xff100004	/* 32-bit */
+
+#define PMCR(n)		(PM_CR_BASE + ((n) * 0x04))
+#define PMCTRH(n)	(PM_CTR_BASE + 0x00 + ((n) * 0x08))
+#define PMCTRL(n)	(PM_CTR_BASE + 0x04 + ((n) * 0x08))
+
+#define PMCR_PMM_MASK	0x0000003f
+
+#define PMCR_CLKF	0x00000100
+#define PMCR_PMCLR	0x00002000
+#define PMCR_PMST	0x00004000
+#define PMCR_PMEN	0x00008000
+
+static struct sh_pmu sh7750_pmu;
+
+/*
+ * There are a number of events supported by each counter (33 in total).
+ * Since we have 2 counters, each counter will take the event code as it
+ * corresponds to the PMCR PMM setting. Each counter can be configured
+ * independently.
+ *
+ *	Event Code	Description
+ *	----------	-----------
+ *
+ *	0x01		Operand read access
+ *	0x02		Operand write access
+ *	0x03		UTLB miss
+ *	0x04		Operand cache read miss
+ *	0x05		Operand cache write miss
+ *	0x06		Instruction fetch (w/ cache)
+ *	0x07		Instruction TLB miss
+ *	0x08		Instruction cache miss
+ *	0x09		All operand accesses
+ *	0x0a		All instruction accesses
+ *	0x0b		OC RAM operand access
+ *	0x0d		On-chip I/O space access
+ *	0x0e		Operand access (r/w)
+ *	0x0f		Operand cache miss (r/w)
+ *	0x10		Branch instruction
+ *	0x11		Branch taken
+ *	0x12		BSR/BSRF/JSR
+ *	0x13		Instruction execution
+ *	0x14		Instruction execution in parallel
+ *	0x15		FPU Instruction execution
+ *	0x16		Interrupt
+ *	0x17		NMI
+ *	0x18		trapa instruction execution
+ *	0x19		UBCA match
+ *	0x1a		UBCB match
+ *	0x21		Instruction cache fill
+ *	0x22		Operand cache fill
+ *	0x23		Elapsed time
+ *	0x24		Pipeline freeze by I-cache miss
+ *	0x25		Pipeline freeze by D-cache miss
+ *	0x27		Pipeline freeze by branch instruction
+ *	0x28		Pipeline freeze by CPU register
+ *	0x29		Pipeline freeze by FPU
+ */
+
+static const int sh7750_general_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= 0x0023,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= 0x000a,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0006,	/* I-cache */
+	[PERF_COUNT_HW_CACHE_MISSES]		= 0x0008,	/* I-cache */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x0010,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= -1,
+	[PERF_COUNT_HW_BUS_CYCLES]		= -1,
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+static const int sh7750_cache_events
+			[PERF_COUNT_HW_CACHE_MAX]
+			[PERF_COUNT_HW_CACHE_OP_MAX]
+			[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+	[ C(L1D) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0001,
+			[ C(RESULT_MISS)   ] = 0x0004,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0002,
+			[ C(RESULT_MISS)   ] = 0x0005,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(L1I) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0006,
+			[ C(RESULT_MISS)   ] = 0x0008,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(LL) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(DTLB) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0x0003,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(ITLB) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0x0007,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+	},
+
+	[ C(BPU) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+	},
+};
+
+static int sh7750_event_map(int event)
+{
+	return sh7750_general_events[event];
+}
+
+static u64 sh7750_pmu_read(int idx)
+{
+	return (u64)((u64)(__raw_readl(PMCTRH(idx)) & 0xffff) << 32) |
+			   __raw_readl(PMCTRL(idx));
+}
+
+static void sh7750_pmu_disable(struct hw_perf_event *hwc, int idx)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readw(PMCR(idx));
+	tmp &= ~(PMCR_PMM_MASK | PMCR_PMEN);
+	__raw_writew(tmp, PMCR(idx));
+}
+
+static void sh7750_pmu_enable(struct hw_perf_event *hwc, int idx)
+{
+	__raw_writew(__raw_readw(PMCR(idx)) | PMCR_PMCLR, PMCR(idx));
+	__raw_writew(hwc->config | PMCR_PMEN | PMCR_PMST, PMCR(idx));
+}
+
+static void sh7750_pmu_disable_all(void)
+{
+	int i;
+
+	for (i = 0; i < sh7750_pmu.num_events; i++)
+		__raw_writew(__raw_readw(PMCR(i)) & ~PMCR_PMEN, PMCR(i));
+}
+
+static void sh7750_pmu_enable_all(void)
+{
+	int i;
+
+	for (i = 0; i < sh7750_pmu.num_events; i++)
+		__raw_writew(__raw_readw(PMCR(i)) | PMCR_PMEN, PMCR(i));
+}
+
+static struct sh_pmu sh7750_pmu = {
+	.name		= "SH7750",
+	.num_events	= 2,
+	.event_map	= sh7750_event_map,
+	.max_events	= ARRAY_SIZE(sh7750_general_events),
+	.raw_event_mask	= PMCR_PMM_MASK,
+	.cache_events	= &sh7750_cache_events,
+	.read		= sh7750_pmu_read,
+	.disable	= sh7750_pmu_disable,
+	.enable		= sh7750_pmu_enable,
+	.disable_all	= sh7750_pmu_disable_all,
+	.enable_all	= sh7750_pmu_enable_all,
+};
+
+static int __init sh7750_pmu_init(void)
+{
+	/*
+	 * Make sure this CPU actually has perf counters.
+	 */
+	if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) {
+		pr_notice("HW perf events unsupported, software events only.\n");
+		return -ENODEV;
+	}
+
+	return register_sh_pmu(&sh7750_pmu);
+}
+arch_initcall(sh7750_pmu_init);
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 490d5dc9e372..33bab477d2e2 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -44,3 +44,4 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7786)	:= pinmux-sh7786.o
 obj-y				+= $(clock-y)
 obj-$(CONFIG_SMP)		+= $(smp-y)
 obj-$(CONFIG_GENERIC_GPIO)	+= $(pinmux-y)
+obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index dfe9192be63e..9db743802f06 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -152,7 +152,7 @@ struct clk div6_clks[] = {
 	SH_CLK_DIV6("fsia_clk", &div3_clk, FCLKACR, 0),
 	SH_CLK_DIV6("fsib_clk", &div3_clk, FCLKBCR, 0),
 	SH_CLK_DIV6("irda_clk", &div3_clk, IRDACLKCR, 0),
-	SH_CLK_DIV6("spu_clk", &div3_clk, SPUCLKCR, 0),
+	SH_CLK_DIV6("spu_clk", &div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT),
 };
 
 #define R_CLK (&r_clk)
diff --git a/arch/sh/kernel/cpu/sh4a/perf_event.c b/arch/sh/kernel/cpu/sh4a/perf_event.c
new file mode 100644
index 000000000000..eddc21973fa1
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/perf_event.c
@@ -0,0 +1,269 @@
+/*
+ * Performance events support for SH-4A performance counters
+ *
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/perf_event.h>
+#include <asm/processor.h>
+
+#define PPC_CCBR(idx)	(0xff200800 + (sizeof(u32) * idx))
+#define PPC_PMCTR(idx)	(0xfc100000 + (sizeof(u32) * idx))
+
+#define CCBR_CIT_MASK	(0x7ff << 6)
+#define CCBR_DUC	(1 << 3)
+#define CCBR_CMDS	(1 << 1)
+#define CCBR_PPCE	(1 << 0)
+
+#define PPC_PMCAT	0xfc100080
+
+#define PMCAT_OVF3	(1 << 27)
+#define PMCAT_CNN3	(1 << 26)
+#define PMCAT_CLR3	(1 << 25)
+#define PMCAT_OVF2	(1 << 19)
+#define PMCAT_CLR2	(1 << 17)
+#define PMCAT_OVF1	(1 << 11)
+#define PMCAT_CNN1	(1 << 10)
+#define PMCAT_CLR1	(1 << 9)
+#define PMCAT_OVF0	(1 << 3)
+#define PMCAT_CLR0	(1 << 1)
+
+static struct sh_pmu sh4a_pmu;
+
+/*
+ * Supported raw event codes:
+ *
+ *	Event Code	Description
+ *	----------	-----------
+ *
+ *	0x0000		number of elapsed cycles
+ *	0x0200		number of elapsed cycles in privileged mode
+ *	0x0280		number of elapsed cycles while SR.BL is asserted
+ *	0x0202		instruction execution
+ *	0x0203		instruction execution in parallel
+ *	0x0204		number of unconditional branches
+ *	0x0208		number of exceptions
+ *	0x0209		number of interrupts
+ *	0x0220		UTLB miss caused by instruction fetch
+ *	0x0222		UTLB miss caused by operand access
+ *	0x02a0		number of ITLB misses
+ *	0x0028		number of accesses to instruction memories
+ *	0x0029		number of accesses to instruction cache
+ *	0x002a		instruction cache miss
+ *	0x022e		number of access to instruction X/Y memory
+ *	0x0030		number of reads to operand memories
+ *	0x0038		number of writes to operand memories
+ *	0x0031		number of operand cache read accesses
+ *	0x0039		number of operand cache write accesses
+ *	0x0032		operand cache read miss
+ *	0x003a		operand cache write miss
+ *	0x0236		number of reads to operand X/Y memory
+ *	0x023e		number of writes to operand X/Y memory
+ *	0x0237		number of reads to operand U memory
+ *	0x023f		number of writes to operand U memory
+ *	0x0337		number of U memory read buffer misses
+ *	0x02b4		number of wait cycles due to operand read access
+ *	0x02bc		number of wait cycles due to operand write access
+ *	0x0033		number of wait cycles due to operand cache read miss
+ *	0x003b		number of wait cycles due to operand cache write miss
+ */
+
+/*
+ * Special reserved bits used by hardware emulators, read values will
+ * vary, but writes must always be 0.
+ */
+#define PMCAT_EMU_CLR_MASK	((1 << 24) | (1 << 16) | (1 << 8) | (1 << 0))
+
+static const int sh4a_general_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= 0x0000,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= 0x0202,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0029,	/* I-cache */
+	[PERF_COUNT_HW_CACHE_MISSES]		= 0x002a,	/* I-cache */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x0204,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= -1,
+	[PERF_COUNT_HW_BUS_CYCLES]		= -1,
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+static const int sh4a_cache_events
+			[PERF_COUNT_HW_CACHE_MAX]
+			[PERF_COUNT_HW_CACHE_OP_MAX]
+			[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+	[ C(L1D) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0031,
+			[ C(RESULT_MISS)   ] = 0x0032,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0039,
+			[ C(RESULT_MISS)   ] = 0x003a,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(L1I) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0029,
+			[ C(RESULT_MISS)   ] = 0x002a,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(LL) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0030,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0038,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(DTLB) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0x0222,
+			[ C(RESULT_MISS)   ] = 0x0220,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0,
+		},
+	},
+
+	[ C(ITLB) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = 0,
+			[ C(RESULT_MISS)   ] = 0x02a0,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+	},
+
+	[ C(BPU) ] = {
+		[ C(OP_READ) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_WRITE) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+		[ C(OP_PREFETCH) ] = {
+			[ C(RESULT_ACCESS) ] = -1,
+			[ C(RESULT_MISS)   ] = -1,
+		},
+	},
+};
+
+static int sh4a_event_map(int event)
+{
+	return sh4a_general_events[event];
+}
+
+static u64 sh4a_pmu_read(int idx)
+{
+	return __raw_readl(PPC_PMCTR(idx));
+}
+
+static void sh4a_pmu_disable(struct hw_perf_event *hwc, int idx)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(PPC_CCBR(idx));
+	tmp &= ~(CCBR_CIT_MASK | CCBR_DUC);
+	__raw_writel(tmp, PPC_CCBR(idx));
+}
+
+static void sh4a_pmu_enable(struct hw_perf_event *hwc, int idx)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(PPC_PMCAT);
+	tmp &= ~PMCAT_EMU_CLR_MASK;
+	tmp |= idx ? PMCAT_CLR1 : PMCAT_CLR0;
+	__raw_writel(tmp, PPC_PMCAT);
+
+	tmp = __raw_readl(PPC_CCBR(idx));
+	tmp |= (hwc->config << 6) | CCBR_CMDS | CCBR_PPCE;
+	__raw_writel(tmp, PPC_CCBR(idx));
+
+	__raw_writel(__raw_readl(PPC_CCBR(idx)) | CCBR_DUC, PPC_CCBR(idx));
+}
+
+static void sh4a_pmu_disable_all(void)
+{
+	int i;
+
+	for (i = 0; i < sh4a_pmu.num_events; i++)
+		__raw_writel(__raw_readl(PPC_CCBR(i)) & ~CCBR_DUC, PPC_CCBR(i));
+}
+
+static void sh4a_pmu_enable_all(void)
+{
+	int i;
+
+	for (i = 0; i < sh4a_pmu.num_events; i++)
+		__raw_writel(__raw_readl(PPC_CCBR(i)) | CCBR_DUC, PPC_CCBR(i));
+}
+
+static struct sh_pmu sh4a_pmu = {
+	.name		= "SH-4A",
+	.num_events	= 2,
+	.event_map	= sh4a_event_map,
+	.max_events	= ARRAY_SIZE(sh4a_general_events),
+	.raw_event_mask	= 0x3ff,
+	.cache_events	= &sh4a_cache_events,
+	.read		= sh4a_pmu_read,
+	.disable	= sh4a_pmu_disable,
+	.enable		= sh4a_pmu_enable,
+	.disable_all	= sh4a_pmu_disable_all,
+	.enable_all	= sh4a_pmu_enable_all,
+};
+
+static int __init sh4a_pmu_init(void)
+{
+	/*
+	 * Make sure this CPU actually has perf counters.
+	 */
+	if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) {
+		pr_notice("HW perf events unsupported, software events only.\n");
+		return -ENODEV;
+	}
+
+	return register_sh_pmu(&sh4a_pmu);
+}
+arch_initcall(sh4a_pmu_init);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index f3851fd757ec..845e89c936e7 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -20,6 +20,8 @@
 #include <linux/uio_driver.h>
 #include <linux/sh_timer.h>
 #include <linux/io.h>
+#include <linux/notifier.h>
+#include <asm/suspend.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
 #include <cpu/sh7724.h>
@@ -202,7 +204,7 @@ static struct resource veu0_resources[] = {
 	[0] = {
 		.name	= "VEU3F0",
 		.start	= 0xfe920000,
-		.end	= 0xfe9200cb - 1,
+		.end	= 0xfe9200cb,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -234,7 +236,7 @@ static struct resource veu1_resources[] = {
 	[0] = {
 		.name	= "VEU3F1",
 		.start	= 0xfe924000,
-		.end	= 0xfe9240cb - 1,
+		.end	= 0xfe9240cb,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -523,6 +525,70 @@ static struct platform_device jpu_device = {
 	},
 };
 
+/* SPU2DSP0 */
+static struct uio_info spu0_platform_data = {
+	.name = "SPU2DSP0",
+	.version = "0",
+	.irq = 86,
+};
+
+static struct resource spu0_resources[] = {
+	[0] = {
+		.name	= "SPU2DSP0",
+		.start	= 0xFE200000,
+		.end	= 0xFE2FFFFF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device spu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 4,
+	.dev = {
+		.platform_data	= &spu0_platform_data,
+	},
+	.resource	= spu0_resources,
+	.num_resources	= ARRAY_SIZE(spu0_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_SPU,
+	},
+};
+
+/* SPU2DSP1 */
+static struct uio_info spu1_platform_data = {
+	.name = "SPU2DSP1",
+	.version = "0",
+	.irq = 87,
+};
+
+static struct resource spu1_resources[] = {
+	[0] = {
+		.name	= "SPU2DSP1",
+		.start	= 0xFE300000,
+		.end	= 0xFE3FFFFF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device spu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 5,
+	.dev = {
+		.platform_data	= &spu1_platform_data,
+	},
+	.resource	= spu1_resources,
+	.num_resources	= ARRAY_SIZE(spu1_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_SPU,
+	},
+};
+
 static struct platform_device *sh7724_devices[] __initdata = {
 	&cmt_device,
 	&tmu0_device,
@@ -539,6 +605,8 @@ static struct platform_device *sh7724_devices[] __initdata = {
 	&veu0_device,
 	&veu1_device,
 	&jpu_device,
+	&spu0_device,
+	&spu1_device,
 };
 
 static int __init sh7724_devices_setup(void)
@@ -547,6 +615,8 @@ static int __init sh7724_devices_setup(void)
 	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
 	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
 	platform_resource_setup_memory(&jpu_device,  "jpu",  2 << 20);
+	platform_resource_setup_memory(&spu0_device, "spu0", 2 << 20);
+	platform_resource_setup_memory(&spu1_device, "spu1", 2 << 20);
 
 	return platform_add_devices(sh7724_devices,
 				    ARRAY_SIZE(sh7724_devices));
@@ -827,3 +897,193 @@ void __init plat_irq_setup(void)
 {
 	register_intc_controller(&intc_desc);
 }
+
+static struct {
+	/* BSC */
+	unsigned long mmselr;
+	unsigned long cs0bcr;
+	unsigned long cs4bcr;
+	unsigned long cs5abcr;
+	unsigned long cs5bbcr;
+	unsigned long cs6abcr;
+	unsigned long cs6bbcr;
+	unsigned long cs4wcr;
+	unsigned long cs5awcr;
+	unsigned long cs5bwcr;
+	unsigned long cs6awcr;
+	unsigned long cs6bwcr;
+	/* INTC */
+	unsigned short ipra;
+	unsigned short iprb;
+	unsigned short iprc;
+	unsigned short iprd;
+	unsigned short ipre;
+	unsigned short iprf;
+	unsigned short iprg;
+	unsigned short iprh;
+	unsigned short ipri;
+	unsigned short iprj;
+	unsigned short iprk;
+	unsigned short iprl;
+	unsigned char imr0;
+	unsigned char imr1;
+	unsigned char imr2;
+	unsigned char imr3;
+	unsigned char imr4;
+	unsigned char imr5;
+	unsigned char imr6;
+	unsigned char imr7;
+	unsigned char imr8;
+	unsigned char imr9;
+	unsigned char imr10;
+	unsigned char imr11;
+	unsigned char imr12;
+	/* RWDT */
+	unsigned short rwtcnt;
+	unsigned short rwtcsr;
+	/* CPG */
+	unsigned long irdaclk;
+	unsigned long spuclk;
+} sh7724_rstandby_state;
+
+static int sh7724_pre_sleep_notifier_call(struct notifier_block *nb,
+					  unsigned long flags, void *unused)
+{
+	if (!(flags & SUSP_SH_RSTANDBY))
+		return NOTIFY_DONE;
+
+	/* BCR */
+	sh7724_rstandby_state.mmselr = __raw_readl(0xff800020); /* MMSELR */
+	sh7724_rstandby_state.mmselr |= 0xa5a50000;
+	sh7724_rstandby_state.cs0bcr = __raw_readl(0xfec10004); /* CS0BCR */
+	sh7724_rstandby_state.cs4bcr = __raw_readl(0xfec10010); /* CS4BCR */
+	sh7724_rstandby_state.cs5abcr = __raw_readl(0xfec10014); /* CS5ABCR */
+	sh7724_rstandby_state.cs5bbcr = __raw_readl(0xfec10018); /* CS5BBCR */
+	sh7724_rstandby_state.cs6abcr = __raw_readl(0xfec1001c); /* CS6ABCR */
+	sh7724_rstandby_state.cs6bbcr = __raw_readl(0xfec10020); /* CS6BBCR */
+	sh7724_rstandby_state.cs4wcr = __raw_readl(0xfec10030); /* CS4WCR */
+	sh7724_rstandby_state.cs5awcr = __raw_readl(0xfec10034); /* CS5AWCR */
+	sh7724_rstandby_state.cs5bwcr = __raw_readl(0xfec10038); /* CS5BWCR */
+	sh7724_rstandby_state.cs6awcr = __raw_readl(0xfec1003c); /* CS6AWCR */
+	sh7724_rstandby_state.cs6bwcr = __raw_readl(0xfec10040); /* CS6BWCR */
+
+	/* INTC */
+	sh7724_rstandby_state.ipra = __raw_readw(0xa4080000); /* IPRA */
+	sh7724_rstandby_state.iprb = __raw_readw(0xa4080004); /* IPRB */
+	sh7724_rstandby_state.iprc = __raw_readw(0xa4080008); /* IPRC */
+	sh7724_rstandby_state.iprd = __raw_readw(0xa408000c); /* IPRD */
+	sh7724_rstandby_state.ipre = __raw_readw(0xa4080010); /* IPRE */
+	sh7724_rstandby_state.iprf = __raw_readw(0xa4080014); /* IPRF */
+	sh7724_rstandby_state.iprg = __raw_readw(0xa4080018); /* IPRG */
+	sh7724_rstandby_state.iprh = __raw_readw(0xa408001c); /* IPRH */
+	sh7724_rstandby_state.ipri = __raw_readw(0xa4080020); /* IPRI */
+	sh7724_rstandby_state.iprj = __raw_readw(0xa4080024); /* IPRJ */
+	sh7724_rstandby_state.iprk = __raw_readw(0xa4080028); /* IPRK */
+	sh7724_rstandby_state.iprl = __raw_readw(0xa408002c); /* IPRL */
+	sh7724_rstandby_state.imr0 = __raw_readb(0xa4080080); /* IMR0 */
+	sh7724_rstandby_state.imr1 = __raw_readb(0xa4080084); /* IMR1 */
+	sh7724_rstandby_state.imr2 = __raw_readb(0xa4080088); /* IMR2 */
+	sh7724_rstandby_state.imr3 = __raw_readb(0xa408008c); /* IMR3 */
+	sh7724_rstandby_state.imr4 = __raw_readb(0xa4080090); /* IMR4 */
+	sh7724_rstandby_state.imr5 = __raw_readb(0xa4080094); /* IMR5 */
+	sh7724_rstandby_state.imr6 = __raw_readb(0xa4080098); /* IMR6 */
+	sh7724_rstandby_state.imr7 = __raw_readb(0xa408009c); /* IMR7 */
+	sh7724_rstandby_state.imr8 = __raw_readb(0xa40800a0); /* IMR8 */
+	sh7724_rstandby_state.imr9 = __raw_readb(0xa40800a4); /* IMR9 */
+	sh7724_rstandby_state.imr10 = __raw_readb(0xa40800a8); /* IMR10 */
+	sh7724_rstandby_state.imr11 = __raw_readb(0xa40800ac); /* IMR11 */
+	sh7724_rstandby_state.imr12 = __raw_readb(0xa40800b0); /* IMR12 */
+
+	/* RWDT */
+	sh7724_rstandby_state.rwtcnt = __raw_readb(0xa4520000); /* RWTCNT */
+	sh7724_rstandby_state.rwtcnt |= 0x5a00;
+	sh7724_rstandby_state.rwtcsr = __raw_readb(0xa4520004); /* RWTCSR */
+	sh7724_rstandby_state.rwtcsr |= 0xa500;
+	__raw_writew(sh7724_rstandby_state.rwtcsr & 0x07, 0xa4520004);
+
+	/* CPG */
+	sh7724_rstandby_state.irdaclk = __raw_readl(0xa4150018); /* IRDACLKCR */
+	sh7724_rstandby_state.spuclk = __raw_readl(0xa415003c); /* SPUCLKCR */
+
+	return NOTIFY_DONE;
+}
+
+static int sh7724_post_sleep_notifier_call(struct notifier_block *nb,
+					   unsigned long flags, void *unused)
+{
+	if (!(flags & SUSP_SH_RSTANDBY))
+		return NOTIFY_DONE;
+
+	/* BCR */
+	__raw_writel(sh7724_rstandby_state.mmselr, 0xff800020); /* MMSELR */
+	__raw_writel(sh7724_rstandby_state.cs0bcr, 0xfec10004); /* CS0BCR */
+	__raw_writel(sh7724_rstandby_state.cs4bcr, 0xfec10010); /* CS4BCR */
+	__raw_writel(sh7724_rstandby_state.cs5abcr, 0xfec10014); /* CS5ABCR */
+	__raw_writel(sh7724_rstandby_state.cs5bbcr, 0xfec10018); /* CS5BBCR */
+	__raw_writel(sh7724_rstandby_state.cs6abcr, 0xfec1001c); /* CS6ABCR */
+	__raw_writel(sh7724_rstandby_state.cs6bbcr, 0xfec10020); /* CS6BBCR */
+	__raw_writel(sh7724_rstandby_state.cs4wcr, 0xfec10030); /* CS4WCR */
+	__raw_writel(sh7724_rstandby_state.cs5awcr, 0xfec10034); /* CS5AWCR */
+	__raw_writel(sh7724_rstandby_state.cs5bwcr, 0xfec10038); /* CS5BWCR */
+	__raw_writel(sh7724_rstandby_state.cs6awcr, 0xfec1003c); /* CS6AWCR */
+	__raw_writel(sh7724_rstandby_state.cs6bwcr, 0xfec10040); /* CS6BWCR */
+
+	/* INTC */
+	__raw_writew(sh7724_rstandby_state.ipra, 0xa4080000); /* IPRA */
+	__raw_writew(sh7724_rstandby_state.iprb, 0xa4080004); /* IPRB */
+	__raw_writew(sh7724_rstandby_state.iprc, 0xa4080008); /* IPRC */
+	__raw_writew(sh7724_rstandby_state.iprd, 0xa408000c); /* IPRD */
+	__raw_writew(sh7724_rstandby_state.ipre, 0xa4080010); /* IPRE */
+	__raw_writew(sh7724_rstandby_state.iprf, 0xa4080014); /* IPRF */
+	__raw_writew(sh7724_rstandby_state.iprg, 0xa4080018); /* IPRG */
+	__raw_writew(sh7724_rstandby_state.iprh, 0xa408001c); /* IPRH */
+	__raw_writew(sh7724_rstandby_state.ipri, 0xa4080020); /* IPRI */
+	__raw_writew(sh7724_rstandby_state.iprj, 0xa4080024); /* IPRJ */
+	__raw_writew(sh7724_rstandby_state.iprk, 0xa4080028); /* IPRK */
+	__raw_writew(sh7724_rstandby_state.iprl, 0xa408002c); /* IPRL */
+	__raw_writeb(sh7724_rstandby_state.imr0, 0xa4080080); /* IMR0 */
+	__raw_writeb(sh7724_rstandby_state.imr1, 0xa4080084); /* IMR1 */
+	__raw_writeb(sh7724_rstandby_state.imr2, 0xa4080088); /* IMR2 */
+	__raw_writeb(sh7724_rstandby_state.imr3, 0xa408008c); /* IMR3 */
+	__raw_writeb(sh7724_rstandby_state.imr4, 0xa4080090); /* IMR4 */
+	__raw_writeb(sh7724_rstandby_state.imr5, 0xa4080094); /* IMR5 */
+	__raw_writeb(sh7724_rstandby_state.imr6, 0xa4080098); /* IMR6 */
+	__raw_writeb(sh7724_rstandby_state.imr7, 0xa408009c); /* IMR7 */
+	__raw_writeb(sh7724_rstandby_state.imr8, 0xa40800a0); /* IMR8 */
+	__raw_writeb(sh7724_rstandby_state.imr9, 0xa40800a4); /* IMR9 */
+	__raw_writeb(sh7724_rstandby_state.imr10, 0xa40800a8); /* IMR10 */
+	__raw_writeb(sh7724_rstandby_state.imr11, 0xa40800ac); /* IMR11 */
+	__raw_writeb(sh7724_rstandby_state.imr12, 0xa40800b0); /* IMR12 */
+
+	/* RWDT */
+	__raw_writew(sh7724_rstandby_state.rwtcnt, 0xa4520000); /* RWTCNT */
+	__raw_writew(sh7724_rstandby_state.rwtcsr, 0xa4520004); /* RWTCSR */
+
+	/* CPG */
+	__raw_writel(sh7724_rstandby_state.irdaclk, 0xa4150018); /* IRDACLKCR */
+	__raw_writel(sh7724_rstandby_state.spuclk, 0xa415003c); /* SPUCLKCR */
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block sh7724_pre_sleep_notifier = {
+	.notifier_call = sh7724_pre_sleep_notifier_call,
+	.priority = SH_MOBILE_PRE(SH_MOBILE_SLEEP_CPU),
+};
+
+static struct notifier_block sh7724_post_sleep_notifier = {
+	.notifier_call = sh7724_post_sleep_notifier_call,
+	.priority = SH_MOBILE_POST(SH_MOBILE_SLEEP_CPU),
+};
+
+static int __init sh7724_sleep_setup(void)
+{
+	atomic_notifier_chain_register(&sh_mobile_pre_sleep_notifier_list,
+				       &sh7724_pre_sleep_notifier);
+
+	atomic_notifier_chain_register(&sh_mobile_post_sleep_notifier_list,
+				       &sh7724_post_sleep_notifier);
+	return 0;
+}
+arch_initcall(sh7724_sleep_setup);
+
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index e848443deeb9..c7ba9166e18a 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -15,6 +15,15 @@
 #include <linux/sh_timer.h>
 #include <asm/mmzone.h>
 
+/*
+ * This intentionally only registers SCIF ports 0, 1, and 3. SCIF 2
+ * INTEVT values overlap with the FPU EXPEVT ones, requiring special
+ * demuxing in the exception dispatch path.
+ *
+ * As this overlap is something that never should have made it in to
+ * silicon in the first place, we just refuse to deal with the port at
+ * all rather than adding infrastructure to hack around it.
+ */
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffc30000,
@@ -27,11 +36,6 @@ static struct plat_sci_port sci_platform_data[] = {
 		.type		= PORT_SCIF,
 		.irqs		= { 44, 45, 47, 46 },
 	}, {
-		.mapbase	= 0xffc50000,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.type		= PORT_SCIF,
-		.irqs		= { 48, 49, 51, 50 },
-	}, {
 		.mapbase	= 0xffc60000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
@@ -268,7 +272,11 @@ enum {
 	UNUSED = 0,
 
 	/* interrupt sources */
-	IRL, IRQ0, IRQ1, IRQ2, IRQ3,
+	IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	IRL_HHLL, IRL_HHLH, IRL_HHHL,
+	IRQ0, IRQ1, IRQ2, IRQ3,
 	HUDII,
 	TMU0, TMU1, TMU2, TMU3, TMU4, TMU5,
 	PCII0, PCII1, PCII2, PCII3, PCII4,
@@ -291,7 +299,7 @@ enum {
 	INTICI4, INTICI5, INTICI6, INTICI7,
 
 	/* interrupt groups */
-	PCII56789, SCIF0, SCIF1, SCIF2, SCIF3,
+	IRL, PCII56789, SCIF0, SCIF1, SCIF2, SCIF3,
 	DMAC0, DMAC1,
 };
 
@@ -309,8 +317,6 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
 	INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0),
 	INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0),
-	INTC_VECT(SCIF2_ERI, 0x800), INTC_VECT(SCIF2_RXI, 0x820),
-	INTC_VECT(SCIF2_BRI, 0x840), INTC_VECT(SCIF2_TXI, 0x860),
 	INTC_VECT(SCIF3_ERI, 0x880), INTC_VECT(SCIF3_RXI, 0x8a0),
 	INTC_VECT(SCIF3_BRI, 0x8c0), INTC_VECT(SCIF3_TXI, 0x8e0),
 	INTC_VECT(DMAC0_DMINT0, 0x900), INTC_VECT(DMAC0_DMINT1, 0x920),
@@ -344,10 +350,13 @@ static struct intc_vect vectors[] __initdata = {
 };
 
 static struct intc_group groups[] __initdata = {
+	INTC_GROUP(IRL, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+		   IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+		   IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+		   IRL_HHLL, IRL_HHLH, IRL_HHHL),
 	INTC_GROUP(PCII56789, PCII5, PCII6, PCII7, PCII8, PCII9),
 	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
 	INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
-	INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
 	INTC_GROUP(SCIF3, SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI),
 	INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
 		   DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
@@ -419,14 +428,14 @@ static DECLARE_INTC_DESC(intc_desc_irq, "shx3-irq", vectors_irq, groups,
 
 /* External interrupt pins in IRL mode */
 static struct intc_vect vectors_irl[] __initdata = {
-	INTC_VECT(IRL, 0x200), INTC_VECT(IRL, 0x220),
-	INTC_VECT(IRL, 0x240), INTC_VECT(IRL, 0x260),
-	INTC_VECT(IRL, 0x280), INTC_VECT(IRL, 0x2a0),
-	INTC_VECT(IRL, 0x2c0), INTC_VECT(IRL, 0x2e0),
-	INTC_VECT(IRL, 0x300), INTC_VECT(IRL, 0x320),
-	INTC_VECT(IRL, 0x340), INTC_VECT(IRL, 0x360),
-	INTC_VECT(IRL, 0x380), INTC_VECT(IRL, 0x3a0),
-	INTC_VECT(IRL, 0x3c0),
+	INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
+	INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
+	INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
+	INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
+	INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
+	INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
+	INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
+	INTC_VECT(IRL_HHHL, 0x3c0),
 };
 
 static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups,
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index 185ec3976a25..5863e0c4d02f 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -14,6 +14,13 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
+#define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12))
+#define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12))
+
+#define STBCR_MSTP	0x00000001
+#define STBCR_RESET	0x00000002
+#define STBCR_LTSLP	0x80000000
+
 static irqreturn_t ipi_interrupt_handler(int irq, void *arg)
 {
 	unsigned int message = (unsigned int)(long)arg;
@@ -21,9 +28,9 @@ static irqreturn_t ipi_interrupt_handler(int irq, void *arg)
 	unsigned int offs = 4 * cpu;
 	unsigned int x;
 
-	x = ctrl_inl(0xfe410070 + offs); /* C0INITICI..CnINTICI */
+	x = __raw_readl(0xfe410070 + offs); /* C0INITICI..CnINTICI */
 	x &= (1 << (message << 2));
-	ctrl_outl(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */
+	__raw_writel(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */
 
 	smp_message_recv(message);
 
@@ -37,6 +44,9 @@ void __init plat_smp_setup(void)
 
 	init_cpu_possible(cpumask_of(cpu));
 
+	/* Enable light sleep for the boot CPU */
+	__raw_writel(__raw_readl(STBCR_REG(cpu)) | STBCR_LTSLP, STBCR_REG(cpu));
+
 	__cpu_number_map[0] = 0;
 	__cpu_logical_map[0] = 0;
 
@@ -66,32 +76,23 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
 			    "IPI", (void *)(long)i);
 }
 
-#define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12))
-#define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12))
-
-#define STBCR_MSTP	0x00000001
-#define STBCR_RESET	0x00000002
-#define STBCR_LTSLP	0x80000000
-
-#define STBCR_AP_VAL	(STBCR_RESET | STBCR_LTSLP)
-
 void plat_start_cpu(unsigned int cpu, unsigned long entry_point)
 {
-	ctrl_outl(entry_point, RESET_REG(cpu));
+	__raw_writel(entry_point, RESET_REG(cpu));
 
-	if (!(ctrl_inl(STBCR_REG(cpu)) & STBCR_MSTP))
-		ctrl_outl(STBCR_MSTP, STBCR_REG(cpu));
+	if (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
+		__raw_writel(STBCR_MSTP, STBCR_REG(cpu));
 
-	while (!(ctrl_inl(STBCR_REG(cpu)) & STBCR_MSTP))
+	while (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
 		cpu_relax();
 
 	/* Start up secondary processor by sending a reset */
-	ctrl_outl(STBCR_AP_VAL, STBCR_REG(cpu));
+	__raw_writel(STBCR_RESET | STBCR_LTSLP, STBCR_REG(cpu));
 }
 
 int plat_smp_processor_id(void)
 {
-	return ctrl_inl(0xff000048); /* CPIDR */
+	return __raw_readl(0xff000048); /* CPIDR */
 }
 
 void plat_send_ipi(unsigned int cpu, unsigned int message)
@@ -100,5 +101,5 @@ void plat_send_ipi(unsigned int cpu, unsigned int message)
 
 	BUG_ON(cpu >= 4);
 
-	ctrl_outl(1 << (message << 2), addr); /* C0INTICI..CnINTICI */
+	__raw_writel(1 << (message << 2), addr); /* C0INTICI..CnINTICI */
 }
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index b0aacf675258..8f13f73cb2cb 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -933,7 +933,7 @@ ret_with_reschedule:
 
 	pta	restore_all, tr1
 
-	movi	(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r8
+	movi	_TIF_SIGPENDING, r8
 	and	r8, r7, r8
 	pta	work_notifysig, tr0
 	bne	r8, ZERO, tr0
diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c
index 1c504bd972c3..83972aa319c2 100644
--- a/arch/sh/kernel/cpu/shmobile/cpuidle.c
+++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c
@@ -87,25 +87,31 @@ void sh_mobile_setup_cpuidle(void)
 
 	dev->safe_state = state;
 
-	state = &dev->states[i++];
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
-	strncpy(state->desc, "SuperH Sleep Mode [SF]", CPUIDLE_DESC_LEN);
-	state->exit_latency = 100;
-	state->target_residency = 1 * 2;
-	state->power_usage = 1;
-	state->flags = 0;
-	state->flags |= CPUIDLE_FLAG_TIME_VALID;
-	state->enter = cpuidle_sleep_enter;
+	if (sh_mobile_sleep_supported & SUSP_SH_SF) {
+		state = &dev->states[i++];
+		snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
+		strncpy(state->desc, "SuperH Sleep Mode [SF]",
+			CPUIDLE_DESC_LEN);
+		state->exit_latency = 100;
+		state->target_residency = 1 * 2;
+		state->power_usage = 1;
+		state->flags = 0;
+		state->flags |= CPUIDLE_FLAG_TIME_VALID;
+		state->enter = cpuidle_sleep_enter;
+	}
 
-	state = &dev->states[i++];
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
-	strncpy(state->desc, "SuperH Mobile Standby Mode [SF]", CPUIDLE_DESC_LEN);
-	state->exit_latency = 2300;
-	state->target_residency = 1 * 2;
-	state->power_usage = 1;
-	state->flags = 0;
-	state->flags |= CPUIDLE_FLAG_TIME_VALID;
-	state->enter = cpuidle_sleep_enter;
+	if (sh_mobile_sleep_supported & SUSP_SH_STANDBY) {
+		state = &dev->states[i++];
+		snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
+		strncpy(state->desc, "SuperH Mobile Standby Mode [SF]",
+			CPUIDLE_DESC_LEN);
+		state->exit_latency = 2300;
+		state->target_residency = 1 * 2;
+		state->power_usage = 1;
+		state->flags = 0;
+		state->flags |= CPUIDLE_FLAG_TIME_VALID;
+		state->enter = cpuidle_sleep_enter;
+	}
 
 	dev->state_count = i;
 
diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
index ee3c2aaf66fb..ca029a44743c 100644
--- a/arch/sh/kernel/cpu/shmobile/pm.c
+++ b/arch/sh/kernel/cpu/shmobile/pm.c
@@ -15,6 +15,13 @@
 #include <linux/suspend.h>
 #include <asm/suspend.h>
 #include <asm/uaccess.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Notifier lists for pre/post sleep notification
+ */
+ATOMIC_NOTIFIER_HEAD(sh_mobile_pre_sleep_notifier_list);
+ATOMIC_NOTIFIER_HEAD(sh_mobile_post_sleep_notifier_list);
 
 /*
  * Sleep modes available on SuperH Mobile:
@@ -26,30 +33,105 @@
 #define SUSP_MODE_SLEEP		(SUSP_SH_SLEEP)
 #define SUSP_MODE_SLEEP_SF	(SUSP_SH_SLEEP | SUSP_SH_SF)
 #define SUSP_MODE_STANDBY_SF	(SUSP_SH_STANDBY | SUSP_SH_SF)
+#define SUSP_MODE_RSTANDBY	(SUSP_SH_RSTANDBY | SUSP_SH_MMU | SUSP_SH_SF)
+ /*
+  * U-standby mode is unsupported since it needs bootloader hacks
+  */
 
-/*
- * The following modes are not there yet:
- *
- * R-standby mode is unsupported, but will be added in the future
- * U-standby mode is low priority since it needs bootloader hacks
- */
-
-#define ILRAM_BASE 0xe5200000
-
-extern const unsigned char sh_mobile_standby[];
-extern const unsigned int sh_mobile_standby_size;
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+#define RAM_BASE 0xfd800000 /* RSMEM */
+#else
+#define RAM_BASE 0xe5200000 /* ILRAM */
+#endif
 
 void sh_mobile_call_standby(unsigned long mode)
 {
-	void *onchip_mem = (void *)ILRAM_BASE;
-	void (*standby_onchip_mem)(unsigned long, unsigned long) = onchip_mem;
+	void *onchip_mem = (void *)RAM_BASE;
+	struct sh_sleep_data *sdp = onchip_mem;
+	void (*standby_onchip_mem)(unsigned long, unsigned long);
+
+	/* code located directly after data structure */
+	standby_onchip_mem = (void *)(sdp + 1);
+
+	atomic_notifier_call_chain(&sh_mobile_pre_sleep_notifier_list,
+				   mode, NULL);
+
+	/* flush the caches if MMU flag is set */
+	if (mode & SUSP_SH_MMU)
+		flush_cache_all();
 
 	/* Let assembly snippet in on-chip memory handle the rest */
-	standby_onchip_mem(mode, ILRAM_BASE);
+	standby_onchip_mem(mode, RAM_BASE);
+
+	atomic_notifier_call_chain(&sh_mobile_post_sleep_notifier_list,
+				   mode, NULL);
+}
+
+extern char sh_mobile_sleep_enter_start;
+extern char sh_mobile_sleep_enter_end;
+
+extern char sh_mobile_sleep_resume_start;
+extern char sh_mobile_sleep_resume_end;
+
+unsigned long sh_mobile_sleep_supported = SUSP_SH_SLEEP;
+
+void sh_mobile_register_self_refresh(unsigned long flags,
+				     void *pre_start, void *pre_end,
+				     void *post_start, void *post_end)
+{
+	void *onchip_mem = (void *)RAM_BASE;
+	void *vp;
+	struct sh_sleep_data *sdp;
+	int n;
+
+	/* part 0: data area */
+	sdp = onchip_mem;
+	sdp->addr.stbcr = 0xa4150020; /* STBCR */
+	sdp->addr.bar = 0xa4150040; /* BAR */
+	sdp->addr.pteh = 0xff000000; /* PTEH */
+	sdp->addr.ptel = 0xff000004; /* PTEL */
+	sdp->addr.ttb = 0xff000008; /* TTB */
+	sdp->addr.tea = 0xff00000c; /* TEA */
+	sdp->addr.mmucr = 0xff000010; /* MMUCR */
+	sdp->addr.ptea = 0xff000034; /* PTEA */
+	sdp->addr.pascr = 0xff000070; /* PASCR */
+	sdp->addr.irmcr = 0xff000078; /* IRMCR */
+	sdp->addr.ccr = 0xff00001c; /* CCR */
+	sdp->addr.ramcr = 0xff000074; /* RAMCR */
+	vp = sdp + 1;
+
+	/* part 1: common code to enter sleep mode */
+	n = &sh_mobile_sleep_enter_end - &sh_mobile_sleep_enter_start;
+	memcpy(vp, &sh_mobile_sleep_enter_start, n);
+	vp += roundup(n, 4);
+
+	/* part 2: board specific code to enter self-refresh mode */
+	n = pre_end - pre_start;
+	memcpy(vp, pre_start, n);
+	sdp->sf_pre = (unsigned long)vp;
+	vp += roundup(n, 4);
+
+	/* part 3: board specific code to resume from self-refresh mode */
+	n = post_end - post_start;
+	memcpy(vp, post_start, n);
+	sdp->sf_post = (unsigned long)vp;
+	vp += roundup(n, 4);
+
+	/* part 4: common code to resume from sleep mode */
+	WARN_ON(vp > (onchip_mem + 0x600));
+	vp = onchip_mem + 0x600; /* located at interrupt vector */
+	n = &sh_mobile_sleep_resume_end - &sh_mobile_sleep_resume_start;
+	memcpy(vp, &sh_mobile_sleep_resume_start, n);
+	sdp->resume = (unsigned long)vp;
+
+	sh_mobile_sleep_supported |= flags;
 }
 
 static int sh_pm_enter(suspend_state_t state)
 {
+	if (!(sh_mobile_sleep_supported & SUSP_MODE_STANDBY_SF))
+		return -ENXIO;
+
 	local_irq_disable();
 	set_bl_bit();
 	sh_mobile_call_standby(SUSP_MODE_STANDBY_SF);
@@ -65,13 +147,6 @@ static struct platform_suspend_ops sh_pm_ops = {
 
 static int __init sh_pm_init(void)
 {
-	void *onchip_mem = (void *)ILRAM_BASE;
-
-	/* Copy the assembly snippet to the otherwise ununsed ILRAM */
-	memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size);
-	wmb();
-	ctrl_barrier();
-
 	suspend_set_ops(&sh_pm_ops);
 	sh_mobile_setup_cpuidle();
 	return 0;
diff --git a/arch/sh/kernel/cpu/shmobile/pm_runtime.c b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
index 7c615b17e209..6dcb8166a64d 100644
--- a/arch/sh/kernel/cpu/shmobile/pm_runtime.c
+++ b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
@@ -45,12 +45,14 @@ static int __platform_pm_runtime_resume(struct platform_device *pdev)
 
 	dev_dbg(d, "__platform_pm_runtime_resume() [%d]\n", hwblk);
 
-	if (d->driver && d->driver->pm && d->driver->pm->runtime_resume) {
+	if (d->driver) {
 		hwblk_enable(hwblk_info, hwblk);
 		ret = 0;
 
 		if (test_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags)) {
-			ret = d->driver->pm->runtime_resume(d);
+			if (d->driver->pm && d->driver->pm->runtime_resume)
+				ret = d->driver->pm->runtime_resume(d);
+
 			if (!ret)
 				clear_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags);
 			else
@@ -73,12 +75,15 @@ static int __platform_pm_runtime_suspend(struct platform_device *pdev)
 
 	dev_dbg(d, "__platform_pm_runtime_suspend() [%d]\n", hwblk);
 
-	if (d->driver && d->driver->pm && d->driver->pm->runtime_suspend) {
+	if (d->driver) {
 		BUG_ON(!test_bit(PDEV_ARCHDATA_FLAG_IDLE, &ad->flags));
+		ret = 0;
 
-		hwblk_enable(hwblk_info, hwblk);
-		ret = d->driver->pm->runtime_suspend(d);
-		hwblk_disable(hwblk_info, hwblk);
+		if (d->driver->pm && d->driver->pm->runtime_suspend) {
+			hwblk_enable(hwblk_info, hwblk);
+			ret = d->driver->pm->runtime_suspend(d);
+			hwblk_disable(hwblk_info, hwblk);
+		}
 
 		if (!ret) {
 			set_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags);
diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
index a439e6c7824f..e9dd7fa0abd2 100644
--- a/arch/sh/kernel/cpu/shmobile/sleep.S
+++ b/arch/sh/kernel/cpu/shmobile/sleep.S
@@ -20,79 +20,103 @@
  * Kernel mode register usage, see entry.S:
  *	k0	scratch
  *	k1	scratch
- *	k4	scratch
  */
 #define k0	r0
 #define k1	r1
-#define k4	r4
 
-/* manage self-refresh and enter standby mode.
+/* manage self-refresh and enter standby mode. must be self-contained.
  * this code will be copied to on-chip memory and executed from there.
  */
+	.balign 4
+ENTRY(sh_mobile_sleep_enter_start)
 
-	.balign 	4096,0,4096
-ENTRY(sh_mobile_standby)
+	/* save mode flags */
+	mov.l	r4, @(SH_SLEEP_MODE, r5)
 
 	/* save original vbr */
-	stc	vbr, r1
-	mova	saved_vbr, r0
-	mov.l	r1, @r0
+	stc	vbr, r0
+	mov.l	r0, @(SH_SLEEP_VBR, r5)
 
 	/* point vbr to our on-chip memory page */
 	ldc	r5, vbr
 
 	/* save return address */
-	mova	saved_spc, r0
-	sts	pr, r5
-	mov.l	r5, @r0
+	sts	pr, r0
+	mov.l	r0, @(SH_SLEEP_SPC, r5)
 
 	/* save sr */
-	mova	saved_sr, r0
-	stc	sr, r5
-	mov.l	r5, @r0
+	stc	sr, r0
+	mov.l	r0, @(SH_SLEEP_SR, r5)
 
-	/* save mode flags */
-	mova	saved_mode, r0
-	mov.l	r4, @r0
+	/* save sp */
+	mov.l	r15, @(SH_SLEEP_SP, r5)
+
+	/* save stbcr */
+	bsr     save_register
+	 mov    #SH_SLEEP_REG_STBCR, r0
+
+	/* save mmu and cache context if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_MMU, r0
+	bt	skip_mmu_save_disable
+
+       /* save mmu state */
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PTEH, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PTEL, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_TTB, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_TEA, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_MMUCR, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PTEA, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_PASCR, r0
 
-	/* put mode flags in r0 */
-	mov	r4, r0
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_IRMCR, r0
 
+	/* invalidate TLBs and disable the MMU */
+	bsr	get_register
+	 mov	#SH_SLEEP_REG_MMUCR, r0
+	mov	#4, r1
+	mov.l	r1, @r0
+	icbi	@r0
+
+	/* save cache registers and disable caches */
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_CCR, r0
+
+	bsr	save_register
+	 mov	#SH_SLEEP_REG_RAMCR, r0
+
+	bsr	get_register
+	 mov	#SH_SLEEP_REG_CCR, r0
+	mov	#0, r1
+	mov.l	r1, @r0
+	icbi	@r0
+
+skip_mmu_save_disable:
+	/* call self-refresh entering code if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
 	tst	#SUSP_SH_SF, r0
 	bt	skip_set_sf
-#ifdef CONFIG_CPU_SUBTYPE_SH7724
-	/* DBSC: put memory in self-refresh mode */
-	mov.l	dben_reg, r4
-	mov.l	dben_data0, r1
-	mov.l	r1, @r4
-
-	mov.l	dbrfpdn0_reg, r4
-	mov.l	dbrfpdn0_data0, r1
-	mov.l	r1, @r4
-
-	mov.l	dbcmdcnt_reg, r4
-	mov.l	dbcmdcnt_data0, r1
-	mov.l	r1, @r4
-
-	mov.l	dbcmdcnt_reg, r4
-	mov.l	dbcmdcnt_data1, r1
-	mov.l	r1, @r4
-
-	mov.l	dbrfpdn0_reg, r4
-	mov.l	dbrfpdn0_data1, r1
-	mov.l	r1, @r4
-#else
-	/* SBSC: disable power down and put in self-refresh mode */
-	mov.l	1f, r4
-	mov.l	2f, r1
-	mov.l	@r4, r2
-	or	r1, r2
-	mov.l   3f, r3
-	and	r3, r2
-	mov.l	r2, @r4
-#endif
+
+	mov.l	@(SH_SLEEP_SF_PRE, r5), r0
+	jsr	@r0
+	 nop
 
 skip_set_sf:
+	mov.l	@(SH_SLEEP_MODE, r5), r0
 	tst	#SUSP_SH_STANDBY, r0
 	bt	test_rstandby
 
@@ -104,6 +128,12 @@ test_rstandby:
 	tst	#SUSP_SH_RSTANDBY, r0
 	bt	test_ustandby
 
+	/* setup BAR register */
+	bsr	get_register
+	 mov	#SH_SLEEP_REG_BAR, r0
+	mov.l	@(SH_SLEEP_RESUME, r5), r1
+	mov.l	r1, @r0
+
 	/* set mode to "r-standby mode" */
 	bra	do_sleep
 	 mov	#0x20, r1
@@ -123,124 +153,136 @@ force_sleep:
 
 do_sleep:
 	/* setup and enter selected standby mode */
-	mov.l	5f, r4
-	mov.l	r1, @r4
+	bsr     get_register
+	 mov    #SH_SLEEP_REG_STBCR, r0
+	mov.l	r1, @r0
 again:
 	sleep
 	bra	again
 	 nop
 
-restore_jump_vbr:
+save_register:
+	add	#SH_SLEEP_BASE_ADDR, r0
+	mov.l	@(r0, r5), r1
+	add	#-SH_SLEEP_BASE_ADDR, r0
+	mov.l	@r1, r1
+	add	#SH_SLEEP_BASE_DATA, r0
+	mov.l	r1, @(r0, r5)
+	add	#-SH_SLEEP_BASE_DATA, r0
+	rts
+	 nop
+
+get_register:
+	add	#SH_SLEEP_BASE_ADDR, r0
+	mov.l	@(r0, r5), r0
+	rts
+	 nop
+ENTRY(sh_mobile_sleep_enter_end)
+
+	.balign 4
+ENTRY(sh_mobile_sleep_resume_start)
+
+	/* figure out start address */
+	bsr	0f
+	 nop
+0:
+	sts	pr, k1
+	mov.l	1f, k0
+	and	k0, k1
+
+	/* store pointer to data area in VBR */
+	ldc	k1, vbr
+
+	/* setup sr with saved sr */
+	mov.l	@(SH_SLEEP_SR, k1), k0
+	ldc	k0, sr
+
+	/* now: user register set! */
+	stc	vbr, r5
+
 	/* setup spc with return address to c code */
-	mov.l	saved_spc, k0
-	ldc	k0, spc
+	mov.l	@(SH_SLEEP_SPC, r5), r0
+	ldc	r0, spc
 
 	/* restore vbr */
-	mov.l	saved_vbr, k0
-	ldc	k0, vbr
+	mov.l	@(SH_SLEEP_VBR, r5), r0
+	ldc	r0, vbr
 
 	/* setup ssr with saved sr */
-	mov.l	saved_sr, k0
-	ldc	k0, ssr
+	mov.l	@(SH_SLEEP_SR, r5), r0
+	ldc	r0, ssr
 
-	/* get mode flags */
-	mov.l	saved_mode, k0
+	/* restore sp */
+	mov.l   @(SH_SLEEP_SP, r5), r15
 
-done_sleep:
-	/* reset standby mode to sleep mode */
-	mov.l	5f, k4
-	mov	#0x00, k1
-	mov.l	k1, @k4
+	/* restore sleep mode register */
+	bsr     restore_register
+	 mov    #SH_SLEEP_REG_STBCR, r0
 
-	tst	#SUSP_SH_SF, k0
+	/* call self-refresh resume code if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_SF, r0
 	bt	skip_restore_sf
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7724
-	/* DBSC: put memory in auto-refresh mode */
-	mov.l	dbrfpdn0_reg, k4
-	mov.l	dbrfpdn0_data0, k1
-	mov.l	k1, @k4
-
-	nop /* sleep 140 ns */
-	nop
-	nop
-	nop
-
-	mov.l	dbcmdcnt_reg, k4
-	mov.l	dbcmdcnt_data0, k1
-	mov.l	k1, @k4
-
-	mov.l	dbcmdcnt_reg, k4
-	mov.l	dbcmdcnt_data1, k1
-	mov.l	k1, @k4
-
-	mov.l	dben_reg, k4
-	mov.l	dben_data1, k1
-	mov.l	k1, @k4
-
-	mov.l	dbrfpdn0_reg, k4
-	mov.l	dbrfpdn0_data2, k1
-	mov.l	k1, @k4
-#else
-	/* SBSC: set auto-refresh mode */
-	mov.l	1f, k4
-	mov.l	@k4, k0
-	mov.l   4f, k1
-	and	k1, k0
-	mov.l	k0, @k4
-	mov.l	6f, k4
-	mov.l	8f, k0
-	mov.l	@k4, k1
-	mov	#-1, k4
-	add	k4, k1
-	or	k1, k0
-	mov.l	7f, k1
-	mov.l	k0, @k1
-#endif
+	mov.l	@(SH_SLEEP_SF_POST, r5), r0
+	jsr	@r0
+	 nop
+
 skip_restore_sf:
-	/* jump to vbr vector */
-	mov.l	saved_vbr, k0
-	mov.l	offset_vbr, k4
-	add	k4, k0
-	jmp	@k0
+	/* restore mmu and cache state if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_MMU, r0
+	bt	skip_restore_mmu
+
+	/* restore mmu state */
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PTEH, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PTEL, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_TTB, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_TEA, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PTEA, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_PASCR, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_IRMCR, r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_MMUCR, r0
+	icbi	@r0
+
+	/* restore cache settings */
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_RAMCR, r0
+	icbi	@r0
+
+	bsr	restore_register
+	 mov	#SH_SLEEP_REG_CCR, r0
+	icbi	@r0
+
+skip_restore_mmu:
+	rte
 	 nop
 
-	.balign 4
-saved_mode:	.long	0
-saved_spc:	.long	0
-saved_sr:	.long	0
-saved_vbr:	.long	0
-offset_vbr:	.long	0x600
-#ifdef CONFIG_CPU_SUBTYPE_SH7724
-dben_reg:	.long	0xfd000010 /* DBEN */
-dben_data0:	.long	0
-dben_data1:	.long	1
-dbrfpdn0_reg:	.long	0xfd000040 /* DBRFPDN0 */
-dbrfpdn0_data0:	.long	0
-dbrfpdn0_data1:	.long	1
-dbrfpdn0_data2:	.long	0x00010000
-dbcmdcnt_reg:	.long	0xfd000014 /* DBCMDCNT */
-dbcmdcnt_data0:	.long	2
-dbcmdcnt_data1:	.long	4
-#else
-1:	.long	0xfe400008 /* SDCR0 */
-2:	.long	0x00000400
-3:	.long	0xffff7fff
-4:	.long	0xfffffbff
-#endif
-5:	.long	0xa4150020 /* STBCR */
-6:	.long   0xfe40001c /* RTCOR */
-7:	.long   0xfe400018 /* RTCNT */
-8:	.long   0xa55a0000
-
-
-/* interrupt vector @ 0x600 */
-	.balign 	0x400,0,0x400
-	.long	0xdeadbeef
-	.balign 	0x200,0,0x200
-	bra	restore_jump_vbr
+restore_register:
+	add	#SH_SLEEP_BASE_DATA, r0
+	mov.l	@(r0, r5), r1
+	add	#-SH_SLEEP_BASE_DATA, r0
+	add	#SH_SLEEP_BASE_ADDR, r0
+	mov.l	@(r0, r5), r0
+	mov.l	r1, @r0
+	rts
 	 nop
-sh_mobile_standby_end:
 
-ENTRY(sh_mobile_standby_size)
-	.long sh_mobile_standby_end - sh_mobile_standby
+	.balign 4
+1:	.long	~0x7ff
+ENTRY(sh_mobile_sleep_resume_end)
diff --git a/arch/sh/kernel/cpu/ubc.S b/arch/sh/kernel/cpu/ubc.S
deleted file mode 100644
index 81923079fa12..000000000000
--- a/arch/sh/kernel/cpu/ubc.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * arch/sh/kernel/cpu/ubc.S
- *
- * Set of management routines for the User Break Controller (UBC)
- *
- * Copyright (C) 2002 Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/linkage.h>
-#include <asm/ubc.h>
-
-#define STBCR2		0xffc00010
-
-ENTRY(ubc_sleep)
-	mov	#0, r0
-
-	mov.l	1f, r1		! Zero out UBC_BBRA ..
-	mov.w	r0, @r1
-
-	mov.l	2f, r1		! .. same for BBRB ..
-	mov.w	r0, @r1
-
-	mov.l	3f, r1		! .. and again for BRCR.
-	mov.w	r0, @r1
-
-	mov.w	@r1, r0		! Dummy read BRCR
-
-	mov.l	4f, r1		! Set MSTP5 in STBCR2
-	mov.b	@r1, r0
-	or	#0x01, r0
-	mov.b	r0, @r1
-
-	mov.b	@r1, r0		! Two dummy reads ..
-	mov.b	@r1, r0
-
-	rts
-	nop
-
-ENTRY(ubc_wakeup)
-	mov.l	4f, r1		! Clear MSTP5
-	mov.b	@r1, r0
-	and	#0xfe, r0
-	mov.b	r0, @r1
-
-	mov.b	@r1, r0		! Two more dummy reads ..
-	mov.b	@r1, r0
-
-	rts
-	nop
-
-1:	.long	UBC_BBRA
-2:	.long	UBC_BBRB
-3:	.long	UBC_BRCR
-4:	.long	STBCR2
-
diff --git a/arch/sh/kernel/dma-nommu.c b/arch/sh/kernel/dma-nommu.c
new file mode 100644
index 000000000000..3c55b87f8b63
--- /dev/null
+++ b/arch/sh/kernel/dma-nommu.c
@@ -0,0 +1,82 @@
+/*
+ * DMA mapping support for platforms lacking IOMMUs.
+ *
+ * Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+
+static dma_addr_t nommu_map_page(struct device *dev, struct page *page,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction dir,
+				 struct dma_attrs *attrs)
+{
+	dma_addr_t addr = page_to_phys(page) + offset;
+
+	WARN_ON(size == 0);
+	dma_cache_sync(dev, page_address(page) + offset, size, dir);
+
+	return addr;
+}
+
+static int nommu_map_sg(struct device *dev, struct scatterlist *sg,
+			int nents, enum dma_data_direction dir,
+			struct dma_attrs *attrs)
+{
+	struct scatterlist *s;
+	int i;
+
+	WARN_ON(nents == 0 || sg[0].length == 0);
+
+	for_each_sg(sg, s, nents, i) {
+		BUG_ON(!sg_page(s));
+
+		dma_cache_sync(dev, sg_virt(s), s->length, dir);
+
+		s->dma_address = sg_phys(s);
+		s->dma_length = s->length;
+	}
+
+	return nents;
+}
+
+#ifdef CONFIG_DMA_NONCOHERENT
+static void nommu_sync_single(struct device *dev, dma_addr_t addr,
+			      size_t size, enum dma_data_direction dir)
+{
+	dma_cache_sync(dev, phys_to_virt(addr), size, dir);
+}
+
+static void nommu_sync_sg(struct device *dev, struct scatterlist *sg,
+			  int nelems, enum dma_data_direction dir)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sg, s, nelems, i)
+		dma_cache_sync(dev, sg_virt(s), s->length, dir);
+}
+#endif
+
+struct dma_map_ops nommu_dma_ops = {
+	.alloc_coherent		= dma_generic_alloc_coherent,
+	.free_coherent		= dma_generic_free_coherent,
+	.map_page		= nommu_map_page,
+	.map_sg			= nommu_map_sg,
+#ifdef CONFIG_DMA_NONCOHERENT
+	.sync_single_for_device	= nommu_sync_single,
+	.sync_sg_for_device	= nommu_sync_sg,
+#endif
+	.is_phys		= 1,
+};
+
+void __init no_iommu_init(void)
+{
+	if (dma_ops)
+		return;
+	dma_ops = &nommu_dma_ops;
+}
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index d76a23170dbb..3576b709f052 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -20,6 +20,7 @@
 #include <linux/list.h>
 #include <linux/mempool.h>
 #include <linux/mm.h>
+#include <linux/elf.h>
 #include <linux/ftrace.h>
 #include <asm/dwarf.h>
 #include <asm/unwinder.h>
@@ -530,7 +531,18 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 }
 
 /**
- *	dwarf_unwind_stack - recursively unwind the stack
+ *	dwarf_free_frame - free the memory allocated for @frame
+ *	@frame: the frame to free
+ */
+void dwarf_free_frame(struct dwarf_frame *frame)
+{
+	dwarf_frame_free_regs(frame);
+	mempool_free(frame, dwarf_frame_pool);
+}
+
+/**
+ *	dwarf_unwind_stack - unwind the stack
+ *
  *	@pc: address of the function to unwind
  *	@prev: struct dwarf_frame of the previous stackframe on the callstack
  *
@@ -548,9 +560,9 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
 	unsigned long addr;
 
 	/*
-	 * If this is the first invocation of this recursive function we
-	 * need get the contents of a physical register to get the CFA
-	 * in order to begin the virtual unwinding of the stack.
+	 * If we're starting at the top of the stack we need get the
+	 * contents of a physical register to get the CFA in order to
+	 * begin the virtual unwinding of the stack.
 	 *
 	 * NOTE: the return address is guaranteed to be setup by the
 	 * time this function makes its first function call.
@@ -593,9 +605,8 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
 	fde = dwarf_lookup_fde(pc);
 	if (!fde) {
 		/*
-		 * This is our normal exit path - the one that stops the
-		 * recursion. There's two reasons why we might exit
-		 * here,
+		 * This is our normal exit path. There are two reasons
+		 * why we might exit here,
 		 *
 		 *	a) pc has no asscociated DWARF frame info and so
 		 *	we don't know how to unwind this frame. This is
@@ -637,10 +648,10 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
 
 		} else {
 			/*
-			 * Again, this is the first invocation of this
-			 * recurisve function. We need to physically
-			 * read the contents of a register in order to
-			 * get the Canonical Frame Address for this
+			 * Again, we're starting from the top of the
+			 * stack. We need to physically read
+			 * the contents of a register in order to get
+			 * the Canonical Frame Address for this
 			 * function.
 			 */
 			frame->cfa = dwarf_read_arch_reg(frame->cfa_register);
@@ -670,13 +681,12 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
 	return frame;
 
 bail:
-	dwarf_frame_free_regs(frame);
-	mempool_free(frame, dwarf_frame_pool);
+	dwarf_free_frame(frame);
 	return NULL;
 }
 
 static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
-			   unsigned char *end)
+			   unsigned char *end, struct module *mod)
 {
 	struct dwarf_cie *cie;
 	unsigned long flags;
@@ -772,6 +782,8 @@ static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
 	cie->initial_instructions = p;
 	cie->instructions_end = end;
 
+	cie->mod = mod;
+
 	/* Add to list */
 	spin_lock_irqsave(&dwarf_cie_lock, flags);
 	list_add_tail(&cie->link, &dwarf_cie_list);
@@ -782,7 +794,7 @@ static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
 
 static int dwarf_parse_fde(void *entry, u32 entry_type,
 			   void *start, unsigned long len,
-			   unsigned char *end)
+			   unsigned char *end, struct module *mod)
 {
 	struct dwarf_fde *fde;
 	struct dwarf_cie *cie;
@@ -831,6 +843,8 @@ static int dwarf_parse_fde(void *entry, u32 entry_type,
 	fde->instructions = p;
 	fde->end = end;
 
+	fde->mod = mod;
+
 	/* Add to list. */
 	spin_lock_irqsave(&dwarf_fde_lock, flags);
 	list_add_tail(&fde->link, &dwarf_fde_list);
@@ -854,10 +868,8 @@ static void dwarf_unwinder_dump(struct task_struct *task,
 	while (1) {
 		frame = dwarf_unwind_stack(return_addr, _frame);
 
-		if (_frame) {
-			dwarf_frame_free_regs(_frame);
-			mempool_free(_frame, dwarf_frame_pool);
-		}
+		if (_frame)
+			dwarf_free_frame(_frame);
 
 		_frame = frame;
 
@@ -867,6 +879,9 @@ static void dwarf_unwinder_dump(struct task_struct *task,
 		return_addr = frame->return_addr;
 		ops->address(data, return_addr, 1);
 	}
+
+	if (frame)
+		dwarf_free_frame(frame);
 }
 
 static struct unwinder dwarf_unwinder = {
@@ -896,48 +911,28 @@ static void dwarf_unwinder_cleanup(void)
 }
 
 /**
- *	dwarf_unwinder_init - initialise the dwarf unwinder
+ *	dwarf_parse_section - parse DWARF section
+ *	@eh_frame_start: start address of the .eh_frame section
+ *	@eh_frame_end: end address of the .eh_frame section
+ *	@mod: the kernel module containing the .eh_frame section
  *
- *	Build the data structures describing the .dwarf_frame section to
- *	make it easier to lookup CIE and FDE entries. Because the
- *	.eh_frame section is packed as tightly as possible it is not
- *	easy to lookup the FDE for a given PC, so we build a list of FDE
- *	and CIE entries that make it easier.
+ *	Parse the information in a .eh_frame section.
  */
-static int __init dwarf_unwinder_init(void)
+static int dwarf_parse_section(char *eh_frame_start, char *eh_frame_end,
+			       struct module *mod)
 {
 	u32 entry_type;
 	void *p, *entry;
 	int count, err = 0;
-	unsigned long len;
+	unsigned long len = 0;
 	unsigned int c_entries, f_entries;
 	unsigned char *end;
-	INIT_LIST_HEAD(&dwarf_cie_list);
-	INIT_LIST_HEAD(&dwarf_fde_list);
 
 	c_entries = 0;
 	f_entries = 0;
-	entry = &__start_eh_frame;
-
-	dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
-			sizeof(struct dwarf_frame), 0,
-			SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL);
-
-	dwarf_reg_cachep = kmem_cache_create("dwarf_regs",
-			sizeof(struct dwarf_reg), 0,
-			SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL);
+	entry = eh_frame_start;
 
-	dwarf_frame_pool = mempool_create(DWARF_FRAME_MIN_REQ,
-					  mempool_alloc_slab,
-					  mempool_free_slab,
-					  dwarf_frame_cachep);
-
-	dwarf_reg_pool = mempool_create(DWARF_REG_MIN_REQ,
-					 mempool_alloc_slab,
-					 mempool_free_slab,
-					 dwarf_reg_cachep);
-
-	while ((char *)entry < __stop_eh_frame) {
+	while ((char *)entry < eh_frame_end) {
 		p = entry;
 
 		count = dwarf_entry_len(p, &len);
@@ -949,6 +944,7 @@ static int __init dwarf_unwinder_init(void)
 			 * entry and move to the next one because 'len'
 			 * tells us where our next entry is.
 			 */
+			err = -EINVAL;
 			goto out;
 		} else
 			p += count;
@@ -960,13 +956,14 @@ static int __init dwarf_unwinder_init(void)
 		p += 4;
 
 		if (entry_type == DW_EH_FRAME_CIE) {
-			err = dwarf_parse_cie(entry, p, len, end);
+			err = dwarf_parse_cie(entry, p, len, end, mod);
 			if (err < 0)
 				goto out;
 			else
 				c_entries++;
 		} else {
-			err = dwarf_parse_fde(entry, entry_type, p, len, end);
+			err = dwarf_parse_fde(entry, entry_type, p, len,
+					      end, mod);
 			if (err < 0)
 				goto out;
 			else
@@ -979,6 +976,129 @@ static int __init dwarf_unwinder_init(void)
 	printk(KERN_INFO "DWARF unwinder initialised: read %u CIEs, %u FDEs\n",
 	       c_entries, f_entries);
 
+	return 0;
+
+out:
+	return err;
+}
+
+#ifdef CONFIG_MODULES
+int module_dwarf_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+			  struct module *me)
+{
+	unsigned int i, err;
+	unsigned long start, end;
+	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+	start = end = 0;
+
+	for (i = 1; i < hdr->e_shnum; i++) {
+		/* Alloc bit cleared means "ignore it." */
+		if ((sechdrs[i].sh_flags & SHF_ALLOC)
+		    && !strcmp(secstrings+sechdrs[i].sh_name, ".eh_frame")) {
+			start = sechdrs[i].sh_addr;
+			end = start + sechdrs[i].sh_size;
+			break;
+		}
+	}
+
+	/* Did we find the .eh_frame section? */
+	if (i != hdr->e_shnum) {
+		err = dwarf_parse_section((char *)start, (char *)end, me);
+		if (err) {
+			printk(KERN_WARNING "%s: failed to parse DWARF info\n",
+			       me->name);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *	module_dwarf_cleanup - remove FDE/CIEs associated with @mod
+ *	@mod: the module that is being unloaded
+ *
+ *	Remove any FDEs and CIEs from the global lists that came from
+ *	@mod's .eh_frame section because @mod is being unloaded.
+ */
+void module_dwarf_cleanup(struct module *mod)
+{
+	struct dwarf_fde *fde;
+	struct dwarf_cie *cie;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dwarf_cie_lock, flags);
+
+again_cie:
+	list_for_each_entry(cie, &dwarf_cie_list, link) {
+		if (cie->mod == mod)
+			break;
+	}
+
+	if (&cie->link != &dwarf_cie_list) {
+		list_del(&cie->link);
+		kfree(cie);
+		goto again_cie;
+	}
+
+	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
+
+	spin_lock_irqsave(&dwarf_fde_lock, flags);
+
+again_fde:
+	list_for_each_entry(fde, &dwarf_fde_list, link) {
+		if (fde->mod == mod)
+			break;
+	}
+
+	if (&fde->link != &dwarf_fde_list) {
+		list_del(&fde->link);
+		kfree(fde);
+		goto again_fde;
+	}
+
+	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
+}
+#endif /* CONFIG_MODULES */
+
+/**
+ *	dwarf_unwinder_init - initialise the dwarf unwinder
+ *
+ *	Build the data structures describing the .dwarf_frame section to
+ *	make it easier to lookup CIE and FDE entries. Because the
+ *	.eh_frame section is packed as tightly as possible it is not
+ *	easy to lookup the FDE for a given PC, so we build a list of FDE
+ *	and CIE entries that make it easier.
+ */
+static int __init dwarf_unwinder_init(void)
+{
+	int err;
+	INIT_LIST_HEAD(&dwarf_cie_list);
+	INIT_LIST_HEAD(&dwarf_fde_list);
+
+	dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
+			sizeof(struct dwarf_frame), 0,
+			SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL);
+
+	dwarf_reg_cachep = kmem_cache_create("dwarf_regs",
+			sizeof(struct dwarf_reg), 0,
+			SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL);
+
+	dwarf_frame_pool = mempool_create(DWARF_FRAME_MIN_REQ,
+					  mempool_alloc_slab,
+					  mempool_free_slab,
+					  dwarf_frame_cachep);
+
+	dwarf_reg_pool = mempool_create(DWARF_REG_MIN_REQ,
+					 mempool_alloc_slab,
+					 mempool_free_slab,
+					 dwarf_reg_cachep);
+
+	err = dwarf_parse_section(__start_eh_frame, __stop_eh_frame, NULL);
+	if (err)
+		goto out;
+
 	err = unwinder_register(&dwarf_unwinder);
 	if (err)
 		goto out;
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 3eb84931d2aa..f0abd58c3a69 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -133,7 +133,7 @@ work_pending:
 	! r8: current_thread_info
 	! t:  result of "tst	#_TIF_NEED_RESCHED, r0"
 	bf/s	work_resched
-	 tst	#(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0
+	 tst	#_TIF_SIGPENDING, r0
 work_notifysig:
 	bt/s	__restore_all
 	 mov	r15, r4
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index 2c48e267256e..b6f41c109beb 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -62,6 +62,150 @@ static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
 	return ftrace_replaced_code;
 }
 
+/*
+ * Modifying code must take extra care. On an SMP machine, if
+ * the code being modified is also being executed on another CPU
+ * that CPU will have undefined results and possibly take a GPF.
+ * We use kstop_machine to stop other CPUS from exectuing code.
+ * But this does not stop NMIs from happening. We still need
+ * to protect against that. We separate out the modification of
+ * the code to take care of this.
+ *
+ * Two buffers are added: An IP buffer and a "code" buffer.
+ *
+ * 1) Put the instruction pointer into the IP buffer
+ *    and the new code into the "code" buffer.
+ * 2) Wait for any running NMIs to finish and set a flag that says
+ *    we are modifying code, it is done in an atomic operation.
+ * 3) Write the code
+ * 4) clear the flag.
+ * 5) Wait for any running NMIs to finish.
+ *
+ * If an NMI is executed, the first thing it does is to call
+ * "ftrace_nmi_enter". This will check if the flag is set to write
+ * and if it is, it will write what is in the IP and "code" buffers.
+ *
+ * The trick is, it does not matter if everyone is writing the same
+ * content to the code location. Also, if a CPU is executing code
+ * it is OK to write to that code location if the contents being written
+ * are the same as what exists.
+ */
+#define MOD_CODE_WRITE_FLAG (1 << 31)	/* set when NMI should do the write */
+static atomic_t nmi_running = ATOMIC_INIT(0);
+static int mod_code_status;		/* holds return value of text write */
+static void *mod_code_ip;		/* holds the IP to write to */
+static void *mod_code_newcode;		/* holds the text to write to the IP */
+
+static unsigned nmi_wait_count;
+static atomic_t nmi_update_count = ATOMIC_INIT(0);
+
+int ftrace_arch_read_dyn_info(char *buf, int size)
+{
+	int r;
+
+	r = snprintf(buf, size, "%u %u",
+		     nmi_wait_count,
+		     atomic_read(&nmi_update_count));
+	return r;
+}
+
+static void clear_mod_flag(void)
+{
+	int old = atomic_read(&nmi_running);
+
+	for (;;) {
+		int new = old & ~MOD_CODE_WRITE_FLAG;
+
+		if (old == new)
+			break;
+
+		old = atomic_cmpxchg(&nmi_running, old, new);
+	}
+}
+
+static void ftrace_mod_code(void)
+{
+	/*
+	 * Yes, more than one CPU process can be writing to mod_code_status.
+	 *    (and the code itself)
+	 * But if one were to fail, then they all should, and if one were
+	 * to succeed, then they all should.
+	 */
+	mod_code_status = probe_kernel_write(mod_code_ip, mod_code_newcode,
+					     MCOUNT_INSN_SIZE);
+
+	/* if we fail, then kill any new writers */
+	if (mod_code_status)
+		clear_mod_flag();
+}
+
+void ftrace_nmi_enter(void)
+{
+	if (atomic_inc_return(&nmi_running) & MOD_CODE_WRITE_FLAG) {
+		smp_rmb();
+		ftrace_mod_code();
+		atomic_inc(&nmi_update_count);
+	}
+	/* Must have previous changes seen before executions */
+	smp_mb();
+}
+
+void ftrace_nmi_exit(void)
+{
+	/* Finish all executions before clearing nmi_running */
+	smp_mb();
+	atomic_dec(&nmi_running);
+}
+
+static void wait_for_nmi_and_set_mod_flag(void)
+{
+	if (!atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG))
+		return;
+
+	do {
+		cpu_relax();
+	} while (atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG));
+
+	nmi_wait_count++;
+}
+
+static void wait_for_nmi(void)
+{
+	if (!atomic_read(&nmi_running))
+		return;
+
+	do {
+		cpu_relax();
+	} while (atomic_read(&nmi_running));
+
+	nmi_wait_count++;
+}
+
+static int
+do_ftrace_mod_code(unsigned long ip, void *new_code)
+{
+	mod_code_ip = (void *)ip;
+	mod_code_newcode = new_code;
+
+	/* The buffers need to be visible before we let NMIs write them */
+	smp_mb();
+
+	wait_for_nmi_and_set_mod_flag();
+
+	/* Make sure all running NMIs have finished before we write the code */
+	smp_mb();
+
+	ftrace_mod_code();
+
+	/* Make sure the write happens before clearing the bit */
+	smp_mb();
+
+	clear_mod_flag();
+	wait_for_nmi();
+
+	return mod_code_status;
+}
+
 static int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 		       unsigned char *new_code)
 {
@@ -86,7 +230,7 @@ static int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 		return -EINVAL;
 
 	/* replace the text with the new text */
-	if (probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE))
+	if (do_ftrace_mod_code(ip, new_code))
 		return -EPERM;
 
 	flush_icache_range(ip, ip + MCOUNT_INSN_SIZE);
diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c
deleted file mode 100644
index d22e5af699f9..000000000000
--- a/arch/sh/kernel/gpio.c
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- * Pinmuxed GPIO support for SuperH.
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-#include <linux/gpio.h>
-
-static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r)
-{
-	if (enum_id < r->begin)
-		return 0;
-
-	if (enum_id > r->end)
-		return 0;
-
-	return 1;
-}
-
-static unsigned long gpio_read_raw_reg(unsigned long reg,
-				       unsigned long reg_width)
-{
-	switch (reg_width) {
-	case 8:
-		return ctrl_inb(reg);
-	case 16:
-		return ctrl_inw(reg);
-	case 32:
-		return ctrl_inl(reg);
-	}
-
-	BUG();
-	return 0;
-}
-
-static void gpio_write_raw_reg(unsigned long reg,
-			       unsigned long reg_width,
-			       unsigned long data)
-{
-	switch (reg_width) {
-	case 8:
-		ctrl_outb(data, reg);
-		return;
-	case 16:
-		ctrl_outw(data, reg);
-		return;
-	case 32:
-		ctrl_outl(data, reg);
-		return;
-	}
-
-	BUG();
-}
-
-static void gpio_write_bit(struct pinmux_data_reg *dr,
-			   unsigned long in_pos, unsigned long value)
-{
-	unsigned long pos;
-
-	pos = dr->reg_width - (in_pos + 1);
-
-#ifdef DEBUG
-	pr_info("write_bit addr = %lx, value = %ld, pos = %ld, "
-		"r_width = %ld\n",
-		dr->reg, !!value, pos, dr->reg_width);
-#endif
-
-	if (value)
-		set_bit(pos, &dr->reg_shadow);
-	else
-		clear_bit(pos, &dr->reg_shadow);
-
-	gpio_write_raw_reg(dr->reg, dr->reg_width, dr->reg_shadow);
-}
-
-static int gpio_read_reg(unsigned long reg, unsigned long reg_width,
-			 unsigned long field_width, unsigned long in_pos)
-{
-	unsigned long data, mask, pos;
-
-	data = 0;
-	mask = (1 << field_width) - 1;
-	pos = reg_width - ((in_pos + 1) * field_width);
-
-#ifdef DEBUG
-	pr_info("read_reg: addr = %lx, pos = %ld, "
-		"r_width = %ld, f_width = %ld\n",
-		reg, pos, reg_width, field_width);
-#endif
-
-	data = gpio_read_raw_reg(reg, reg_width);
-	return (data >> pos) & mask;
-}
-
-static void gpio_write_reg(unsigned long reg, unsigned long reg_width,
-			   unsigned long field_width, unsigned long in_pos,
-			   unsigned long value)
-{
-	unsigned long mask, pos;
-
-	mask = (1 << field_width) - 1;
-	pos = reg_width - ((in_pos + 1) * field_width);
-
-#ifdef DEBUG
-	pr_info("write_reg addr = %lx, value = %ld, pos = %ld, "
-		"r_width = %ld, f_width = %ld\n",
-		reg, value, pos, reg_width, field_width);
-#endif
-
-	mask = ~(mask << pos);
-	value = value << pos;
-
-	switch (reg_width) {
-	case 8:
-		ctrl_outb((ctrl_inb(reg) & mask) | value, reg);
-		break;
-	case 16:
-		ctrl_outw((ctrl_inw(reg) & mask) | value, reg);
-		break;
-	case 32:
-		ctrl_outl((ctrl_inl(reg) & mask) | value, reg);
-		break;
-	}
-}
-
-static int setup_data_reg(struct pinmux_info *gpioc, unsigned gpio)
-{
-	struct pinmux_gpio *gpiop = &gpioc->gpios[gpio];
-	struct pinmux_data_reg *data_reg;
-	int k, n;
-
-	if (!enum_in_range(gpiop->enum_id, &gpioc->data))
-		return -1;
-
-	k = 0;
-	while (1) {
-		data_reg = gpioc->data_regs + k;
-
-		if (!data_reg->reg_width)
-			break;
-
-		for (n = 0; n < data_reg->reg_width; n++) {
-			if (data_reg->enum_ids[n] == gpiop->enum_id) {
-				gpiop->flags &= ~PINMUX_FLAG_DREG;
-				gpiop->flags |= (k << PINMUX_FLAG_DREG_SHIFT);
-				gpiop->flags &= ~PINMUX_FLAG_DBIT;
-				gpiop->flags |= (n << PINMUX_FLAG_DBIT_SHIFT);
-				return 0;
-			}
-		}
-		k++;
-	}
-
-	BUG();
-
-	return -1;
-}
-
-static void setup_data_regs(struct pinmux_info *gpioc)
-{
-	struct pinmux_data_reg *drp;
-	int k;
-
-	for (k = gpioc->first_gpio; k <= gpioc->last_gpio; k++)
-		setup_data_reg(gpioc, k);
-
-	k = 0;
-	while (1) {
-		drp = gpioc->data_regs + k;
-
-		if (!drp->reg_width)
-			break;
-
-		drp->reg_shadow = gpio_read_raw_reg(drp->reg, drp->reg_width);
-		k++;
-	}
-}
-
-static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio,
-			struct pinmux_data_reg **drp, int *bitp)
-{
-	struct pinmux_gpio *gpiop = &gpioc->gpios[gpio];
-	int k, n;
-
-	if (!enum_in_range(gpiop->enum_id, &gpioc->data))
-		return -1;
-
-	k = (gpiop->flags & PINMUX_FLAG_DREG) >> PINMUX_FLAG_DREG_SHIFT;
-	n = (gpiop->flags & PINMUX_FLAG_DBIT) >> PINMUX_FLAG_DBIT_SHIFT;
-	*drp = gpioc->data_regs + k;
-	*bitp = n;
-	return 0;
-}
-
-static int get_config_reg(struct pinmux_info *gpioc, pinmux_enum_t enum_id,
-			  struct pinmux_cfg_reg **crp, int *indexp,
-			  unsigned long **cntp)
-{
-	struct pinmux_cfg_reg *config_reg;
-	unsigned long r_width, f_width;
-	int k, n;
-
-	k = 0;
-	while (1) {
-		config_reg = gpioc->cfg_regs + k;
-
-		r_width = config_reg->reg_width;
-		f_width = config_reg->field_width;
-
-		if (!r_width)
-			break;
-		for (n = 0; n < (r_width / f_width) * 1 << f_width; n++) {
-			if (config_reg->enum_ids[n] == enum_id) {
-				*crp = config_reg;
-				*indexp = n;
-				*cntp = &config_reg->cnt[n / (1 << f_width)];
-				return 0;
-			}
-		}
-		k++;
-	}
-
-	return -1;
-}
-
-static int get_gpio_enum_id(struct pinmux_info *gpioc, unsigned gpio,
-			    int pos, pinmux_enum_t *enum_idp)
-{
-	pinmux_enum_t enum_id = gpioc->gpios[gpio].enum_id;
-	pinmux_enum_t *data = gpioc->gpio_data;
-	int k;
-
-	if (!enum_in_range(enum_id, &gpioc->data)) {
-		if (!enum_in_range(enum_id, &gpioc->mark)) {
-			pr_err("non data/mark enum_id for gpio %d\n", gpio);
-			return -1;
-		}
-	}
-
-	if (pos) {
-		*enum_idp = data[pos + 1];
-		return pos + 1;
-	}
-
-	for (k = 0; k < gpioc->gpio_data_size; k++) {
-		if (data[k] == enum_id) {
-			*enum_idp = data[k + 1];
-			return k + 1;
-		}
-	}
-
-	pr_err("cannot locate data/mark enum_id for gpio %d\n", gpio);
-	return -1;
-}
-
-static void write_config_reg(struct pinmux_info *gpioc,
-			     struct pinmux_cfg_reg *crp,
-			     int index)
-{
-	unsigned long ncomb, pos, value;
-
-	ncomb = 1 << crp->field_width;
-	pos = index / ncomb;
-	value = index % ncomb;
-
-	gpio_write_reg(crp->reg, crp->reg_width, crp->field_width, pos, value);
-}
-
-static int check_config_reg(struct pinmux_info *gpioc,
-			    struct pinmux_cfg_reg *crp,
-			    int index)
-{
-	unsigned long ncomb, pos, value;
-
-	ncomb = 1 << crp->field_width;
-	pos = index / ncomb;
-	value = index % ncomb;
-
-	if (gpio_read_reg(crp->reg, crp->reg_width,
-			  crp->field_width, pos) == value)
-		return 0;
-
-	return -1;
-}
-
-enum { GPIO_CFG_DRYRUN, GPIO_CFG_REQ, GPIO_CFG_FREE };
-
-static int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio,
-			      int pinmux_type, int cfg_mode)
-{
-	struct pinmux_cfg_reg *cr = NULL;
-	pinmux_enum_t enum_id;
-	struct pinmux_range *range;
-	int in_range, pos, index;
-	unsigned long *cntp;
-
-	switch (pinmux_type) {
-
-	case PINMUX_TYPE_FUNCTION:
-		range = NULL;
-		break;
-
-	case PINMUX_TYPE_OUTPUT:
-		range = &gpioc->output;
-		break;
-
-	case PINMUX_TYPE_INPUT:
-		range = &gpioc->input;
-		break;
-
-	case PINMUX_TYPE_INPUT_PULLUP:
-		range = &gpioc->input_pu;
-		break;
-
-	case PINMUX_TYPE_INPUT_PULLDOWN:
-		range = &gpioc->input_pd;
-		break;
-
-	default:
-		goto out_err;
-	}
-
-	pos = 0;
-	enum_id = 0;
-	index = 0;
-	while (1) {
-		pos = get_gpio_enum_id(gpioc, gpio, pos, &enum_id);
-		if (pos <= 0)
-			goto out_err;
-
-		if (!enum_id)
-			break;
-
-		in_range = enum_in_range(enum_id, &gpioc->function);
-		if (!in_range && range) {
-			in_range = enum_in_range(enum_id, range);
-
-			if (in_range && enum_id == range->force)
-				continue;
-		}
-
-		if (!in_range)
-			continue;
-
-		if (get_config_reg(gpioc, enum_id, &cr, &index, &cntp) != 0)
-			goto out_err;
-
-		switch (cfg_mode) {
-		case GPIO_CFG_DRYRUN:
-			if (!*cntp || !check_config_reg(gpioc, cr, index))
-				continue;
-			break;
-
-		case GPIO_CFG_REQ:
-			write_config_reg(gpioc, cr, index);
-			*cntp = *cntp + 1;
-			break;
-
-		case GPIO_CFG_FREE:
-			*cntp = *cntp - 1;
-			break;
-		}
-	}
-
-	return 0;
- out_err:
-	return -1;
-}
-
-static DEFINE_SPINLOCK(gpio_lock);
-
-static struct pinmux_info *chip_to_pinmux(struct gpio_chip *chip)
-{
-	return container_of(chip, struct pinmux_info, chip);
-}
-
-static int sh_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
-	struct pinmux_info *gpioc = chip_to_pinmux(chip);
-	struct pinmux_data_reg *dummy;
-	unsigned long flags;
-	int i, ret, pinmux_type;
-
-	ret = -EINVAL;
-
-	if (!gpioc)
-		goto err_out;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	if ((gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE) != PINMUX_TYPE_NONE)
-		goto err_unlock;
-
-	/* setup pin function here if no data is associated with pin */
-
-	if (get_data_reg(gpioc, offset, &dummy, &i) != 0)
-		pinmux_type = PINMUX_TYPE_FUNCTION;
-	else
-		pinmux_type = PINMUX_TYPE_GPIO;
-
-	if (pinmux_type == PINMUX_TYPE_FUNCTION) {
-		if (pinmux_config_gpio(gpioc, offset,
-				       pinmux_type,
-				       GPIO_CFG_DRYRUN) != 0)
-			goto err_unlock;
-
-		if (pinmux_config_gpio(gpioc, offset,
-				       pinmux_type,
-				       GPIO_CFG_REQ) != 0)
-			BUG();
-	}
-
-	gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE;
-	gpioc->gpios[offset].flags |= pinmux_type;
-
-	ret = 0;
- err_unlock:
-	spin_unlock_irqrestore(&gpio_lock, flags);
- err_out:
-	return ret;
-}
-
-static void sh_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
-	struct pinmux_info *gpioc = chip_to_pinmux(chip);
-	unsigned long flags;
-	int pinmux_type;
-
-	if (!gpioc)
-		return;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	pinmux_type = gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE;
-	pinmux_config_gpio(gpioc, offset, pinmux_type, GPIO_CFG_FREE);
-	gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE;
-	gpioc->gpios[offset].flags |= PINMUX_TYPE_NONE;
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-}
-
-static int pinmux_direction(struct pinmux_info *gpioc,
-			    unsigned gpio, int new_pinmux_type)
-{
-	int pinmux_type;
-	int ret = -EINVAL;
-
-	if (!gpioc)
-		goto err_out;
-
-	pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE;
-
-	switch (pinmux_type) {
-	case PINMUX_TYPE_GPIO:
-		break;
-	case PINMUX_TYPE_OUTPUT:
-	case PINMUX_TYPE_INPUT:
-	case PINMUX_TYPE_INPUT_PULLUP:
-	case PINMUX_TYPE_INPUT_PULLDOWN:
-		pinmux_config_gpio(gpioc, gpio, pinmux_type, GPIO_CFG_FREE);
-		break;
-	default:
-		goto err_out;
-	}
-
-	if (pinmux_config_gpio(gpioc, gpio,
-			       new_pinmux_type,
-			       GPIO_CFG_DRYRUN) != 0)
-		goto err_out;
-
-	if (pinmux_config_gpio(gpioc, gpio,
-			       new_pinmux_type,
-			       GPIO_CFG_REQ) != 0)
-		BUG();
-
-	gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE;
-	gpioc->gpios[gpio].flags |= new_pinmux_type;
-
-	ret = 0;
- err_out:
-	return ret;
-}
-
-static int sh_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct pinmux_info *gpioc = chip_to_pinmux(chip);
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-	ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_INPUT);
-	spin_unlock_irqrestore(&gpio_lock, flags);
-
-	return ret;
-}
-
-static void sh_gpio_set_value(struct pinmux_info *gpioc,
-			     unsigned gpio, int value)
-{
-	struct pinmux_data_reg *dr = NULL;
-	int bit = 0;
-
-	if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0)
-		BUG();
-	else
-		gpio_write_bit(dr, bit, value);
-}
-
-static int sh_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
-				    int value)
-{
-	struct pinmux_info *gpioc = chip_to_pinmux(chip);
-	unsigned long flags;
-	int ret;
-
-	sh_gpio_set_value(gpioc, offset, value);
-	spin_lock_irqsave(&gpio_lock, flags);
-	ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_OUTPUT);
-	spin_unlock_irqrestore(&gpio_lock, flags);
-
-	return ret;
-}
-
-static int sh_gpio_get_value(struct pinmux_info *gpioc, unsigned gpio)
-{
-	struct pinmux_data_reg *dr = NULL;
-	int bit = 0;
-
-	if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0) {
-		BUG();
-		return 0;
-	}
-
-	return gpio_read_reg(dr->reg, dr->reg_width, 1, bit);
-}
-
-static int sh_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	return sh_gpio_get_value(chip_to_pinmux(chip), offset);
-}
-
-static void sh_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	sh_gpio_set_value(chip_to_pinmux(chip), offset, value);
-}
-
-int register_pinmux(struct pinmux_info *pip)
-{
-	struct gpio_chip *chip = &pip->chip;
-
-	pr_info("sh pinmux: %s handling gpio %d -> %d\n",
-		pip->name, pip->first_gpio, pip->last_gpio);
-
-	setup_data_regs(pip);
-
-	chip->request = sh_gpio_request;
-	chip->free = sh_gpio_free;
-	chip->direction_input = sh_gpio_direction_input;
-	chip->get = sh_gpio_get;
-	chip->direction_output = sh_gpio_direction_output;
-	chip->set = sh_gpio_set;
-
-	WARN_ON(pip->first_gpio != 0); /* needs testing */
-
-	chip->label = pip->name;
-	chip->owner = THIS_MODULE;
-	chip->base = pip->first_gpio;
-	chip->ngpio = (pip->last_gpio - pip->first_gpio) + 1;
-
-	return gpiochip_add(chip);
-}
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
index a78be74b8d3e..1151ecdffa71 100644
--- a/arch/sh/kernel/head_32.S
+++ b/arch/sh/kernel/head_32.S
@@ -33,7 +33,7 @@ ENTRY(empty_zero_page)
 	.long	1		/* LOADER_TYPE */
 	.long	0x00000000	/* INITRD_START */
 	.long	0x00000000	/* INITRD_SIZE */
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_PMB_FIXED)
 	.long	0x53453f00 + 32	/* "SE?" = 32 bit */
 #else
 	.long	0x53453f00 + 29	/* "SE?" = 29 bit */
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index 27ff2dc093c7..aaff0037fcd7 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -21,7 +21,7 @@
 #include <asm/atomic.h>
 
 static int hlt_counter;
-void (*pm_idle)(void);
+void (*pm_idle)(void) = NULL;
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
@@ -39,48 +39,92 @@ static int __init hlt_setup(char *__unused)
 }
 __setup("hlt", hlt_setup);
 
+static inline int hlt_works(void)
+{
+	return !hlt_counter;
+}
+
+/*
+ * On SMP it's slightly faster (but much more power-consuming!)
+ * to poll the ->work.need_resched flag instead of waiting for the
+ * cross-CPU IPI to arrive. Use this option with caution.
+ */
+static void poll_idle(void)
+{
+	local_irq_enable();
+	while (!need_resched())
+		cpu_relax();
+}
+
 void default_idle(void)
 {
-	if (!hlt_counter) {
+	if (hlt_works()) {
 		clear_thread_flag(TIF_POLLING_NRFLAG);
 		smp_mb__after_clear_bit();
-		set_bl_bit();
-		stop_critical_timings();
 
-		while (!need_resched())
+		if (!need_resched()) {
+			local_irq_enable();
 			cpu_sleep();
+		} else
+			local_irq_enable();
 
-		start_critical_timings();
-		clear_bl_bit();
 		set_thread_flag(TIF_POLLING_NRFLAG);
 	} else
-		while (!need_resched())
-			cpu_relax();
+		poll_idle();
 }
 
+/*
+ * The idle thread. There's no useful work to be done, so just try to conserve
+ * power and have a low exit latency (ie sit in a loop waiting for somebody to
+ * say that they'd like to reschedule)
+ */
 void cpu_idle(void)
 {
+	unsigned int cpu = smp_processor_id();
+
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	/* endless idle loop with no priority at all */
 	while (1) {
-		void (*idle)(void) = pm_idle;
+		tick_nohz_stop_sched_tick(1);
 
-		if (!idle)
-			idle = default_idle;
+		while (!need_resched() && cpu_online(cpu)) {
+			check_pgt_cache();
+			rmb();
 
-		tick_nohz_stop_sched_tick(1);
-		while (!need_resched())
-			idle();
-		tick_nohz_restart_sched_tick();
+			local_irq_disable();
+			/* Don't trace irqs off for idle */
+			stop_critical_timings();
+			pm_idle();
+			/*
+			 * Sanity check to ensure that pm_idle() returns
+			 * with IRQs enabled
+			 */
+			WARN_ON(irqs_disabled());
+			start_critical_timings();
+		}
 
+		tick_nohz_restart_sched_tick();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
-		check_pgt_cache();
 	}
 }
 
+void __cpuinit select_idle_routine(void)
+{
+	/*
+	 * If a platform has set its own idle routine, leave it alone.
+	 */
+	if (pm_idle)
+		return;
+
+	if (hlt_works())
+		pm_idle = default_idle;
+	else
+		pm_idle = poll_idle;
+}
+
 static void do_nothing(void *unused)
 {
 }
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index b8fa6524760a..e1e1dbd19557 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -24,7 +24,7 @@
 #define dummy_read()
 #endif
 
-unsigned long generic_io_base;
+unsigned long generic_io_base = 0;
 
 u8 generic_inb(unsigned long port)
 {
@@ -147,8 +147,10 @@ void generic_outsl(unsigned long port, const void *src, unsigned long count)
 
 void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
 {
+#ifdef P1SEG
 	if (PXSEG(addr) >= P1SEG)
 		return (void __iomem *)addr;
+#endif
 
 	return (void __iomem *)(addr + generic_io_base);
 }
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index eac7da772fc2..e1913f28f418 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -37,7 +37,15 @@ void ack_bad_irq(unsigned int irq)
  */
 static int show_other_interrupts(struct seq_file *p, int prec)
 {
+	int j;
+
+	seq_printf(p, "%*s: ", prec, "NMI");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stat[j].__nmi_count);
+	seq_printf(p, "  Non-maskable interrupts\n");
+
 	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
+
 	return 0;
 }
 
@@ -255,6 +263,12 @@ void __init init_IRQ(void)
 {
 	plat_irq_setup();
 
+	/*
+	 * Pin any of the legacy IRQ vectors that haven't already been
+	 * grabbed by the platform
+	 */
+	reserve_irq_legacy();
+
 	/* Perform the machine specific initialisation */
 	if (sh_mv.mv_init_irq)
 		sh_mv.mv_init_irq();
diff --git a/arch/sh/kernel/irq_32.c b/arch/sh/kernel/irq_32.c
new file mode 100644
index 000000000000..e33ab15831f9
--- /dev/null
+++ b/arch/sh/kernel/irq_32.c
@@ -0,0 +1,57 @@
+/*
+ * SHcompact irqflags support
+ *
+ * Copyright (C) 2006 - 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/irqflags.h>
+#include <linux/module.h>
+
+void notrace raw_local_irq_restore(unsigned long flags)
+{
+	unsigned long __dummy0, __dummy1;
+
+	if (flags == RAW_IRQ_DISABLED) {
+		__asm__ __volatile__ (
+			"stc	sr, %0\n\t"
+			"or	#0xf0, %0\n\t"
+			"ldc	%0, sr\n\t"
+			: "=&z" (__dummy0)
+			: /* no inputs */
+			: "memory"
+		);
+	} else {
+		__asm__ __volatile__ (
+			"stc	sr, %0\n\t"
+			"and	%1, %0\n\t"
+#ifdef CONFIG_CPU_HAS_SR_RB
+			"stc	r6_bank, %1\n\t"
+			"or	%1, %0\n\t"
+#endif
+			"ldc	%0, sr\n\t"
+			: "=&r" (__dummy0), "=r" (__dummy1)
+			: "1" (~RAW_IRQ_DISABLED)
+			: "memory"
+		);
+	}
+}
+EXPORT_SYMBOL(raw_local_irq_restore);
+
+unsigned long notrace __raw_local_save_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	#0xf0, %0\n\t"
+		: "=&z" (flags)
+		: /* no inputs */
+		: "memory"
+	);
+
+	return flags;
+}
+EXPORT_SYMBOL(__raw_local_save_flags);
diff --git a/arch/sh/kernel/irq_64.c b/arch/sh/kernel/irq_64.c
new file mode 100644
index 000000000000..32365ba0e039
--- /dev/null
+++ b/arch/sh/kernel/irq_64.c
@@ -0,0 +1,51 @@
+/*
+ * SHmedia irqflags support
+ *
+ * Copyright (C) 2006 - 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/irqflags.h>
+#include <linux/module.h>
+#include <cpu/registers.h>
+
+void notrace raw_local_irq_restore(unsigned long flags)
+{
+	unsigned long long __dummy;
+
+	if (flags == RAW_IRQ_DISABLED) {
+		__asm__ __volatile__ (
+			"getcon	" __SR ", %0\n\t"
+			"or	%0, %1, %0\n\t"
+			"putcon	%0, " __SR "\n\t"
+			: "=&r" (__dummy)
+			: "r" (RAW_IRQ_DISABLED)
+		);
+	} else {
+		__asm__ __volatile__ (
+			"getcon	" __SR ", %0\n\t"
+			"and	%0, %1, %0\n\t"
+			"putcon	%0, " __SR "\n\t"
+			: "=&r" (__dummy)
+			: "r" (~RAW_IRQ_DISABLED)
+		);
+	}
+}
+EXPORT_SYMBOL(raw_local_irq_restore);
+
+unsigned long notrace __raw_local_save_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"getcon	" __SR ", %0\n\t"
+		"and	%0, %1, %0"
+		: "=&r" (flags)
+		: "r" (RAW_IRQ_DISABLED)
+	);
+
+	return flags;
+}
+EXPORT_SYMBOL(__raw_local_save_flags);
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 7ea2704ea033..76f280223ebd 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -46,12 +46,6 @@ void machine_crash_shutdown(struct pt_regs *regs)
  */
 int machine_kexec_prepare(struct kimage *image)
 {
-	/* older versions of kexec-tools are passing
-	 * the zImage entry point as a virtual address.
-	 */
-	if (image->start != PHYSADDR(image->start))
-		return -EINVAL; /* upgrade your kexec-tools */
-
 	return 0;
 }
 
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index cbce639b108a..1652340ba3f2 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -135,5 +135,9 @@ void __init sh_mv_setup(void)
 	if (!sh_mv.mv_nr_irqs)
 		sh_mv.mv_nr_irqs = NR_IRQS;
 
+#ifdef P2SEG
 	__set_io_port_base(P2SEG);
+#else
+	__set_io_port_base(0);
+#endif
 }
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index c2efdcde266f..43adddfe4c04 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -32,6 +32,7 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <asm/unaligned.h>
+#include <asm/dwarf.h>
 
 void *module_alloc(unsigned long size)
 {
@@ -145,10 +146,16 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	return module_bug_finalize(hdr, sechdrs, me);
+	int ret = 0;
+
+	ret |= module_dwarf_finalize(hdr, sechdrs, me);
+	ret |= module_bug_finalize(hdr, sechdrs, me);
+
+	return ret;
 }
 
 void module_arch_cleanup(struct module *mod)
 {
 	module_bug_cleanup(mod);
+	module_dwarf_cleanup(mod);
 }
diff --git a/arch/sh/kernel/perf_callchain.c b/arch/sh/kernel/perf_callchain.c
new file mode 100644
index 000000000000..24ea837eac5b
--- /dev/null
+++ b/arch/sh/kernel/perf_callchain.c
@@ -0,0 +1,98 @@
+/*
+ * Performance event callchain support - SuperH architecture code
+ *
+ * Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_event.h>
+#include <linux/percpu.h>
+#include <asm/unwinder.h>
+#include <asm/ptrace.h>
+
+static inline void callchain_store(struct perf_callchain_entry *entry, u64 ip)
+{
+	if (entry->nr < PERF_MAX_STACK_DEPTH)
+		entry->ip[entry->nr++] = ip;
+}
+
+static void callchain_warning(void *data, char *msg)
+{
+}
+
+static void
+callchain_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+}
+
+static int callchain_stack(void *data, char *name)
+{
+	return 0;
+}
+
+static void callchain_address(void *data, unsigned long addr, int reliable)
+{
+	struct perf_callchain_entry *entry = data;
+
+	if (reliable)
+		callchain_store(entry, addr);
+}
+
+static const struct stacktrace_ops callchain_ops = {
+	.warning	= callchain_warning,
+	.warning_symbol	= callchain_warning_symbol,
+	.stack		= callchain_stack,
+	.address	= callchain_address,
+};
+
+static void
+perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry)
+{
+	callchain_store(entry, PERF_CONTEXT_KERNEL);
+	callchain_store(entry, regs->pc);
+
+	unwind_stack(NULL, regs, NULL, &callchain_ops, entry);
+}
+
+static void
+perf_do_callchain(struct pt_regs *regs, struct perf_callchain_entry *entry)
+{
+	int is_user;
+
+	if (!regs)
+		return;
+
+	is_user = user_mode(regs);
+
+	if (!current || current->pid == 0)
+		return;
+
+	if (is_user && current->state != TASK_RUNNING)
+		return;
+
+	/*
+	 * Only the kernel side is implemented for now.
+	 */
+	if (!is_user)
+		perf_callchain_kernel(regs, entry);
+}
+
+/*
+ * No need for separate IRQ and NMI entries.
+ */
+static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
+
+struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
+{
+	struct perf_callchain_entry *entry = &__get_cpu_var(callchain);
+
+	entry->nr = 0;
+
+	perf_do_callchain(regs, entry);
+
+	return entry;
+}
diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c
new file mode 100644
index 000000000000..7ff0943e7a08
--- /dev/null
+++ b/arch/sh/kernel/perf_event.c
@@ -0,0 +1,312 @@
+/*
+ * Performance event support framework for SuperH hardware counters.
+ *
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * Heavily based on the x86 and PowerPC implementations.
+ *
+ * x86:
+ *  Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
+ *  Copyright (C) 2009 Jaswinder Singh Rajput
+ *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
+ *
+ * ppc:
+ *  Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/perf_event.h>
+#include <asm/processor.h>
+
+struct cpu_hw_events {
+	struct perf_event	*events[MAX_HWEVENTS];
+	unsigned long		used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
+	unsigned long		active_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
+};
+
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+static struct sh_pmu *sh_pmu __read_mostly;
+
+/* Number of perf_events counting hardware events */
+static atomic_t num_events;
+/* Used to avoid races in calling reserve/release_pmc_hardware */
+static DEFINE_MUTEX(pmc_reserve_mutex);
+
+/*
+ * Stub these out for now, do something more profound later.
+ */
+int reserve_pmc_hardware(void)
+{
+	return 0;
+}
+
+void release_pmc_hardware(void)
+{
+}
+
+static inline int sh_pmu_initialized(void)
+{
+	return !!sh_pmu;
+}
+
+/*
+ * Release the PMU if this is the last perf_event.
+ */
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+	if (!atomic_add_unless(&num_events, -1, 1)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_dec_return(&num_events) == 0)
+			release_pmc_hardware();
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+}
+
+static int hw_perf_cache_event(int config, int *evp)
+{
+	unsigned long type, op, result;
+	int ev;
+
+	if (!sh_pmu->cache_events)
+		return -EINVAL;
+
+	/* unpack config */
+	type = config & 0xff;
+	op = (config >> 8) & 0xff;
+	result = (config >> 16) & 0xff;
+
+	if (type >= PERF_COUNT_HW_CACHE_MAX ||
+	    op >= PERF_COUNT_HW_CACHE_OP_MAX ||
+	    result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ev = (*sh_pmu->cache_events)[type][op][result];
+	if (ev == 0)
+		return -EOPNOTSUPP;
+	if (ev == -1)
+		return -EINVAL;
+	*evp = ev;
+	return 0;
+}
+
+static int __hw_perf_event_init(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	struct hw_perf_event *hwc = &event->hw;
+	int config = -1;
+	int err;
+
+	if (!sh_pmu_initialized())
+		return -ENODEV;
+
+	/*
+	 * All of the on-chip counters are "limited", in that they have
+	 * no interrupts, and are therefore unable to do sampling without
+	 * further work and timer assistance.
+	 */
+	if (hwc->sample_period)
+		return -EINVAL;
+
+	/*
+	 * See if we need to reserve the counter.
+	 *
+	 * If no events are currently in use, then we have to take a
+	 * mutex to ensure that we don't race with another task doing
+	 * reserve_pmc_hardware or release_pmc_hardware.
+	 */
+	err = 0;
+	if (!atomic_inc_not_zero(&num_events)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_read(&num_events) == 0 &&
+		    reserve_pmc_hardware())
+			err = -EBUSY;
+		else
+			atomic_inc(&num_events);
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+
+	if (err)
+		return err;
+
+	event->destroy = hw_perf_event_destroy;
+
+	switch (attr->type) {
+	case PERF_TYPE_RAW:
+		config = attr->config & sh_pmu->raw_event_mask;
+		break;
+	case PERF_TYPE_HW_CACHE:
+		err = hw_perf_cache_event(attr->config, &config);
+		if (err)
+			return err;
+		break;
+	case PERF_TYPE_HARDWARE:
+		if (attr->config >= sh_pmu->max_events)
+			return -EINVAL;
+
+		config = sh_pmu->event_map(attr->config);
+		break;
+	}
+
+	if (config == -1)
+		return -EINVAL;
+
+	hwc->config |= config;
+
+	return 0;
+}
+
+static void sh_perf_event_update(struct perf_event *event,
+				   struct hw_perf_event *hwc, int idx)
+{
+	u64 prev_raw_count, new_raw_count;
+	s64 delta;
+	int shift = 0;
+
+	/*
+	 * Depending on the counter configuration, they may or may not
+	 * be chained, in which case the previous counter value can be
+	 * updated underneath us if the lower-half overflows.
+	 *
+	 * Our tactic to handle this is to first atomically read and
+	 * exchange a new raw count - then add that new-prev delta
+	 * count to the generic counter atomically.
+	 *
+	 * As there is no interrupt associated with the overflow events,
+	 * this is the simplest approach for maintaining consistency.
+	 */
+again:
+	prev_raw_count = atomic64_read(&hwc->prev_count);
+	new_raw_count = sh_pmu->read(idx);
+
+	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+			     new_raw_count) != prev_raw_count)
+		goto again;
+
+	/*
+	 * Now we have the new raw value and have updated the prev
+	 * timestamp already. We can now calculate the elapsed delta
+	 * (counter-)time and add that to the generic counter.
+	 *
+	 * Careful, not all hw sign-extends above the physical width
+	 * of the count.
+	 */
+	delta = (new_raw_count << shift) - (prev_raw_count << shift);
+	delta >>= shift;
+
+	atomic64_add(delta, &event->count);
+}
+
+static void sh_pmu_disable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	clear_bit(idx, cpuc->active_mask);
+	sh_pmu->disable(hwc, idx);
+
+	barrier();
+
+	sh_perf_event_update(event, &event->hw, idx);
+
+	cpuc->events[idx] = NULL;
+	clear_bit(idx, cpuc->used_mask);
+
+	perf_event_update_userpage(event);
+}
+
+static int sh_pmu_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	if (test_and_set_bit(idx, cpuc->used_mask)) {
+		idx = find_first_zero_bit(cpuc->used_mask, sh_pmu->num_events);
+		if (idx == sh_pmu->num_events)
+			return -EAGAIN;
+
+		set_bit(idx, cpuc->used_mask);
+		hwc->idx = idx;
+	}
+
+	sh_pmu->disable(hwc, idx);
+
+	cpuc->events[idx] = event;
+	set_bit(idx, cpuc->active_mask);
+
+	sh_pmu->enable(hwc, idx);
+
+	perf_event_update_userpage(event);
+
+	return 0;
+}
+
+static void sh_pmu_read(struct perf_event *event)
+{
+	sh_perf_event_update(event, &event->hw, event->hw.idx);
+}
+
+static const struct pmu pmu = {
+	.enable		= sh_pmu_enable,
+	.disable	= sh_pmu_disable,
+	.read		= sh_pmu_read,
+};
+
+const struct pmu *hw_perf_event_init(struct perf_event *event)
+{
+	int err = __hw_perf_event_init(event);
+	if (unlikely(err)) {
+		if (event->destroy)
+			event->destroy(event);
+		return ERR_PTR(err);
+	}
+
+	return &pmu;
+}
+
+void hw_perf_event_setup(int cpu)
+{
+	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
+
+	memset(cpuhw, 0, sizeof(struct cpu_hw_events));
+}
+
+void hw_perf_enable(void)
+{
+	if (!sh_pmu_initialized())
+		return;
+
+	sh_pmu->enable_all();
+}
+
+void hw_perf_disable(void)
+{
+	if (!sh_pmu_initialized())
+		return;
+
+	sh_pmu->disable_all();
+}
+
+int register_sh_pmu(struct sh_pmu *pmu)
+{
+	if (sh_pmu)
+		return -EBUSY;
+	sh_pmu = pmu;
+
+	pr_info("Performance Events: %s support registered\n", pmu->name);
+
+	WARN_ON(pmu->num_events > MAX_HWEVENTS);
+
+	return 0;
+}
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 0673c4746be3..d8af889366a4 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -134,7 +134,10 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 	regs.regs[5] = (unsigned long)fn;
 
 	regs.pc = (unsigned long)kernel_thread_helper;
-	regs.sr = (1 << 30);
+	regs.sr = SR_MD;
+#if defined(CONFIG_SH_FPU)
+	regs.sr |= SR_FD;
+#endif
 
 	/* Ok, create the new process.. */
 	pid = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
@@ -142,6 +145,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 
 	return pid;
 }
+EXPORT_SYMBOL(kernel_thread);
 
 /*
  * Free current thread data structures etc..
@@ -186,6 +190,16 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
 
 	return fpvalid;
 }
+EXPORT_SYMBOL(dump_fpu);
+
+/*
+ * This gets called before we allocate a new thread and copy
+ * the current task into it.
+ */
+void prepare_to_copy(struct task_struct *tsk)
+{
+	unlazy_fpu(tsk, task_pt_regs(tsk));
+}
 
 asmlinkage void ret_from_fork(void);
 
@@ -195,16 +209,10 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 {
 	struct thread_info *ti = task_thread_info(p);
 	struct pt_regs *childregs;
-#if defined(CONFIG_SH_FPU) || defined(CONFIG_SH_DSP)
+#if defined(CONFIG_SH_DSP)
 	struct task_struct *tsk = current;
 #endif
 
-#if defined(CONFIG_SH_FPU)
-	unlazy_fpu(tsk, regs);
-	p->thread.fpu = tsk->thread.fpu;
-	copy_to_stopped_child_used_math(p);
-#endif
-
 #if defined(CONFIG_SH_DSP)
 	if (is_dsp_enabled(tsk)) {
 		/* We can use the __save_dsp or just copy the struct:
@@ -224,6 +232,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	} else {
 		childregs->regs[15] = (unsigned long)childregs;
 		ti->addr_limit = KERNEL_DS;
+		ti->status &= ~TS_USEDFPU;
+		p->fpu_counter = 0;
 	}
 
 	if (clone_flags & CLONE_SETTLS)
@@ -288,9 +298,13 @@ static void ubc_set_tracing(int asid, unsigned long pc)
 __notrace_funcgraph struct task_struct *
 __switch_to(struct task_struct *prev, struct task_struct *next)
 {
-#if defined(CONFIG_SH_FPU)
+	struct thread_struct *next_t = &next->thread;
+
 	unlazy_fpu(prev, task_pt_regs(prev));
-#endif
+
+	/* we're going to use this soon, after a few expensive things */
+	if (next->fpu_counter > 5)
+		prefetch(&next_t->fpu.hard);
 
 #ifdef CONFIG_MMU
 	/*
@@ -321,6 +335,14 @@ __switch_to(struct task_struct *prev, struct task_struct *next)
 #endif
 	}
 
+	/*
+	 * If the task has used fpu the last 5 timeslices, just do a full
+	 * restore of the math state immediately to avoid the trap; the
+	 * chances of needing FPU soon are obviously high now
+	 */
+	if (next->fpu_counter > 5)
+		fpu_state_restore(task_pt_regs(next));
+
 	return prev;
 }
 
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 1192398ef582..359b8a2f4d2e 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -335,6 +335,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
 		      &regs, 0, NULL, NULL);
 }
+EXPORT_SYMBOL(kernel_thread);
 
 /*
  * Free current thread data structures etc..
@@ -417,6 +418,7 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
 	return 0; /* Task didn't use the fpu at all. */
 #endif
 }
+EXPORT_SYMBOL(dump_fpu);
 
 asmlinkage void ret_from_fork(void);
 
diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c
new file mode 100644
index 000000000000..df3ab5811074
--- /dev/null
+++ b/arch/sh/kernel/return_address.c
@@ -0,0 +1,54 @@
+/*
+ * arch/sh/kernel/return_address.c
+ *
+ * Copyright (C) 2009  Matt Fleming
+ * Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <asm/dwarf.h>
+
+#ifdef CONFIG_DWARF_UNWINDER
+
+void *return_address(unsigned int depth)
+{
+	struct dwarf_frame *frame;
+	unsigned long ra;
+	int i;
+
+	for (i = 0, frame = NULL, ra = 0; i <= depth; i++) {
+		struct dwarf_frame *tmp;
+
+		tmp = dwarf_unwind_stack(ra, frame);
+
+		if (frame)
+			dwarf_free_frame(frame);
+
+		frame = tmp;
+
+		if (!frame || !frame->return_addr)
+			break;
+
+		ra = frame->return_addr;
+	}
+
+	/* Failed to unwind the stack to the specified depth. */
+	WARN_ON(i != depth + 1);
+
+	if (frame)
+		dwarf_free_frame(frame);
+
+	return (void *)ra;
+}
+
+#else
+
+void *return_address(unsigned int depth)
+{
+	return NULL;
+}
+
+#endif
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 99b4fb553bf1..5a947a2567e4 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -453,6 +453,10 @@ void __init setup_arch(char **cmdline_p)
 
 	paging_init();
 
+#ifdef CONFIG_PMB_ENABLE
+	pmb_init();
+#endif
+
 #ifdef CONFIG_SMP
 	plat_smp_setup();
 #endif
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 444cce3ae921..3896f26efa4a 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -1,37 +1,11 @@
 #include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/sched.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-#include <linux/vmalloc.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <asm/sections.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
 #include <asm/checksum.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <asm/ftrace.h>
-
-extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
-
-/* platform dependent support */
-EXPORT_SYMBOL(dump_fpu);
-EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(strlen);
-
-/* PCI exports */
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(pci_alloc_consistent);
-EXPORT_SYMBOL(pci_free_consistent);
-#endif
+#include <asm/sections.h>
 
-/* mem exports */
 EXPORT_SYMBOL(memchr);
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(memset);
@@ -40,6 +14,13 @@ EXPORT_SYMBOL(__copy_user);
 EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
 EXPORT_SYMBOL(__const_udelay);
+EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_generic);
+EXPORT_SYMBOL(copy_page);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(_ebss);
+EXPORT_SYMBOL(empty_zero_page);
 
 #define DECLARE_EXPORT(name)		\
 	extern void name(void);EXPORT_SYMBOL(name)
@@ -107,30 +88,6 @@ DECLARE_EXPORT(__sdivsi3_i4);
 DECLARE_EXPORT(__udivsi3_i4);
 DECLARE_EXPORT(__sdivsi3_i4i);
 DECLARE_EXPORT(__udivsi3_i4i);
-
-#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
-	defined(CONFIG_SH7705_CACHE_32KB))
-/* needed by some modules */
-EXPORT_SYMBOL(flush_cache_all);
-EXPORT_SYMBOL(flush_cache_range);
-EXPORT_SYMBOL(flush_dcache_page);
-#endif
-
 #ifdef CONFIG_MCOUNT
 DECLARE_EXPORT(mcount);
 #endif
-EXPORT_SYMBOL(csum_partial);
-EXPORT_SYMBOL(csum_partial_copy_generic);
-#ifdef CONFIG_IPV6
-EXPORT_SYMBOL(csum_ipv6_magic);
-#endif
-EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(_ebss);
-EXPORT_SYMBOL(empty_zero_page);
-
-#ifndef CONFIG_CACHE_OFF
-EXPORT_SYMBOL(__flush_purge_region);
-EXPORT_SYMBOL(__flush_wback_region);
-EXPORT_SYMBOL(__flush_invalidate_region);
-#endif
diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
index d008e17eb257..45afa5c51f67 100644
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ b/arch/sh/kernel/sh_ksyms_64.c
@@ -24,16 +24,6 @@
 #include <asm/delay.h>
 #include <asm/irq.h>
 
-extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
-
-/* platform dependent support */
-EXPORT_SYMBOL(dump_fpu);
-EXPORT_SYMBOL(kernel_thread);
-
-#ifdef CONFIG_VT
-EXPORT_SYMBOL(screen_info);
-#endif
-
 EXPORT_SYMBOL(__put_user_asm_b);
 EXPORT_SYMBOL(__put_user_asm_w);
 EXPORT_SYMBOL(__put_user_asm_l);
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 3db37425210d..12815ce01ecd 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -67,7 +67,8 @@ sys_sigsuspend(old_sigset_t mask,
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
-	set_thread_flag(TIF_RESTORE_SIGMASK);
+	set_restore_sigmask();
+
 	return -ERESTARTNOHAND;
 }
 
@@ -590,7 +591,7 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 	if (try_to_freeze())
 		goto no_signal;
 
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK)
 		oldset = &current->saved_sigmask;
 	else
 		oldset = &current->blocked;
@@ -602,12 +603,13 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 		/* Whee!  Actually deliver the signal.  */
 		if (handle_signal(signr, &ka, &info, oldset,
 				  regs, save_r0) == 0) {
-			/* a signal was successfully delivered; the saved
+			/*
+			 * A signal was successfully delivered; the saved
 			 * sigmask will have been stored in the signal frame,
 			 * and will be restored by sigreturn, so we can simply
-			 * clear the TIF_RESTORE_SIGMASK flag */
-			if (test_thread_flag(TIF_RESTORE_SIGMASK))
-				clear_thread_flag(TIF_RESTORE_SIGMASK);
+			 * clear the TS_RESTORE_SIGMASK flag
+			 */
+			current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
 
 			tracehook_signal_handler(signr, &info, &ka, regs,
 					test_thread_flag(TIF_SINGLESTEP));
@@ -631,10 +633,12 @@ no_signal:
 		}
 	}
 
-	/* if there's no signal to deliver, we just put the saved sigmask
-	 * back */
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
+	/*
+	 * If there's no signal to deliver, we just put the saved sigmask
+	 * back.
+	 */
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
 		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
 	}
 }
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 74793c80a57a..feb3dddd3192 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -101,7 +101,7 @@ static int do_signal(struct pt_regs *regs, sigset_t *oldset)
 	if (try_to_freeze())
 		goto no_signal;
 
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK)
 		oldset = &current->saved_sigmask;
 	else if (!oldset)
 		oldset = &current->blocked;
@@ -115,11 +115,9 @@ static int do_signal(struct pt_regs *regs, sigset_t *oldset)
 			/*
 			 * If a signal was successfully delivered, the
 			 * saved sigmask is in its frame, and we can
-			 * clear the TIF_RESTORE_SIGMASK flag.
+			 * clear the TS_RESTORE_SIGMASK flag.
 			 */
-			if (test_thread_flag(TIF_RESTORE_SIGMASK))
-				clear_thread_flag(TIF_RESTORE_SIGMASK);
-
+			current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
 			tracehook_signal_handler(signr, &info, &ka, regs, 0);
 			return 1;
 		}
@@ -146,8 +144,8 @@ no_signal:
 	}
 
 	/* No signal to deliver -- put the saved sigmask back */
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
 		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
 	}
 
@@ -176,6 +174,7 @@ sys_sigsuspend(old_sigset_t mask,
 	while (1) {
 		current->state = TASK_INTERRUPTIBLE;
 		schedule();
+		set_restore_sigmask();
 		regs->pc += 4;    /* because sys_sigreturn decrements the pc */
 		if (do_signal(regs, &saveset)) {
 			/* pc now points at signal handler. Need to decrement
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 160db1003cfb..983e0792d5f3 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -122,7 +122,9 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	stack_start.bss_start = 0; /* don't clear bss for secondary cpus */
 	stack_start.start_kernel_fn = start_secondary;
 
-	flush_cache_all();
+	flush_icache_range((unsigned long)&stack_start,
+			   (unsigned long)&stack_start + sizeof(stack_start));
+	wmb();
 
 	plat_start_cpu(cpu, (unsigned long)_stext);
 
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 8aa5d1ceaf14..71399cde03b5 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -28,37 +28,13 @@
 #include <asm/cacheflush.h>
 #include <asm/cachectl.h>
 
-static inline long
-do_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
-	 unsigned long flags, int fd, unsigned long pgoff)
-{
-	int error = -EBADF;
-	struct file *file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
 asmlinkage int old_mmap(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags,
 	int fd, unsigned long off)
 {
 	if (off & ~PAGE_MASK)
 		return -EINVAL;
-	return do_mmap2(addr, len, prot, flags, fd, off>>PAGE_SHIFT);
+	return sys_mmap_pgoff(addr, len, prot, flags, fd, off>>PAGE_SHIFT);
 }
 
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
@@ -74,7 +50,7 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 
 	pgoff >>= PAGE_SHIFT - 12;
 
-	return do_mmap2(addr, len, prot, flags, fd, pgoff);
+	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 }
 
 /*
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index 5bfde6c77498..07d2aaea9ae8 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -391,3 +391,4 @@ sys_call_table:
 	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo
 	.long sys_perf_event_open
+	.long sys_recvmmsg		/* 365 */
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 0838942b7083..9b0b633b6c92 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -16,6 +16,32 @@
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
+cpumask_t cpu_core_map[NR_CPUS];
+
+static cpumask_t cpu_coregroup_map(unsigned int cpu)
+{
+	/*
+	 * Presently all SH-X3 SMP cores are multi-cores, so just keep it
+	 * simple until we have a method for determining topology..
+	 */
+	return cpu_possible_map;
+}
+
+const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
+{
+	return &cpu_core_map[cpu];
+}
+
+int arch_update_cpu_topology(void)
+{
+	unsigned int cpu;
+
+	for_each_possible_cpu(cpu)
+		cpu_core_map[cpu] = cpu_coregroup_map(cpu);
+
+	return 0;
+}
+
 static int __init topology_init(void)
 {
 	int i, ret;
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index a8396f36bd14..7b036339dc92 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -9,8 +9,8 @@
 #include <asm/unwinder.h>
 #include <asm/system.h>
 
-#ifdef CONFIG_BUG
-void handle_BUG(struct pt_regs *regs)
+#ifdef CONFIG_GENERIC_BUG
+static void handle_BUG(struct pt_regs *regs)
 {
 	const struct bug_entry *bug;
 	unsigned long bugaddr = regs->pc;
@@ -81,7 +81,7 @@ BUILD_TRAP_HANDLER(bug)
 		       SIGTRAP) == NOTIFY_STOP)
 		return;
 
-#ifdef CONFIG_BUG
+#ifdef CONFIG_GENERIC_BUG
 	if (__kernel_text_address(instruction_pointer(regs))) {
 		insn_size_t insn = *(insn_size_t *)instruction_pointer(regs);
 		if (insn == TRAPA_BUG_OPCODE)
@@ -95,9 +95,11 @@ BUILD_TRAP_HANDLER(bug)
 
 BUILD_TRAP_HANDLER(nmi)
 {
+	unsigned int cpu = smp_processor_id();
 	TRAP_HANDLER_DECL;
 
 	nmi_enter();
+	nmi_count(cpu)++;
 
 	switch (notify_die(DIE_NMI, "NMI", regs, 0, vec & 0xff, SIGINT)) {
 	case NOTIFY_OK:
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 7a2ee3a6b8e7..3da5a125d884 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -25,6 +25,7 @@
 #include <linux/kexec.h>
 #include <linux/limits.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/sysfs.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -68,61 +69,49 @@ static const char *se_usermode_action[] = {
 	"signal+warn"
 };
 
-static int
-proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
-		    void *data)
+static int alignment_proc_show(struct seq_file *m, void *v)
 {
-	char *p = page;
-	int len;
-
-	p += sprintf(p, "User:\t\t%lu\n", se_user);
-	p += sprintf(p, "System:\t\t%lu\n", se_sys);
-	p += sprintf(p, "Half:\t\t%lu\n", se_half);
-	p += sprintf(p, "Word:\t\t%lu\n", se_word);
-	p += sprintf(p, "DWord:\t\t%lu\n", se_dword);
-	p += sprintf(p, "Multi:\t\t%lu\n", se_multi);
-	p += sprintf(p, "User faults:\t%i (%s)\n", se_usermode,
+	seq_printf(m, "User:\t\t%lu\n", se_user);
+	seq_printf(m, "System:\t\t%lu\n", se_sys);
+	seq_printf(m, "Half:\t\t%lu\n", se_half);
+	seq_printf(m, "Word:\t\t%lu\n", se_word);
+	seq_printf(m, "DWord:\t\t%lu\n", se_dword);
+	seq_printf(m, "Multi:\t\t%lu\n", se_multi);
+	seq_printf(m, "User faults:\t%i (%s)\n", se_usermode,
 			se_usermode_action[se_usermode]);
-	p += sprintf(p, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
+	seq_printf(m, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
 			se_kernmode_warn ? "+warn" : "");
-
-	len = (p - page) - off;
-	if (len < 0)
-		len = 0;
-
-	*eof = (len <= count) ? 1 : 0;
-	*start = page + off;
-
-	return len;
+	return 0;
 }
 
-static int proc_alignment_write(struct file *file, const char __user *buffer,
-				unsigned long count, void *data)
+static int alignment_proc_open(struct inode *inode, struct file *file)
 {
-	char mode;
-
-	if (count > 0) {
-		if (get_user(mode, buffer))
-			return -EFAULT;
-		if (mode >= '0' && mode <= '5')
-			se_usermode = mode - '0';
-	}
-	return count;
+	return single_open(file, alignment_proc_show, NULL);
 }
 
-static int proc_alignment_kern_write(struct file *file, const char __user *buffer,
-				     unsigned long count, void *data)
+static ssize_t alignment_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *pos)
 {
+	int *data = PDE(file->f_path.dentry->d_inode)->data;
 	char mode;
 
 	if (count > 0) {
 		if (get_user(mode, buffer))
 			return -EFAULT;
-		if (mode >= '0' && mode <= '1')
-			se_kernmode_warn = mode - '0';
+		if (mode >= '0' && mode <= '5')
+			*data = mode - '0';
 	}
 	return count;
 }
+
+static const struct file_operations alignment_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= alignment_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= alignment_proc_write,
+};
 #endif
 
 static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
@@ -945,14 +934,9 @@ void __init trap_init(void)
 	set_exception_table_evt(0x800, do_reserved_inst);
 	set_exception_table_evt(0x820, do_illegal_slot_inst);
 #elif defined(CONFIG_SH_FPU)
-#ifdef CONFIG_CPU_SUBTYPE_SHX3
-	set_exception_table_evt(0xd80, fpu_state_restore_trap_handler);
-	set_exception_table_evt(0xda0, fpu_state_restore_trap_handler);
-#else
 	set_exception_table_evt(0x800, fpu_state_restore_trap_handler);
 	set_exception_table_evt(0x820, fpu_state_restore_trap_handler);
 #endif
-#endif
 
 #ifdef CONFIG_CPU_SH2
 	set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_trap_handler);
@@ -1011,20 +995,16 @@ static int __init alignment_init(void)
 	if (!dir)
 		return -ENOMEM;
 
-	res = create_proc_entry("alignment", S_IWUSR | S_IRUGO, dir);
+	res = proc_create_data("alignment", S_IWUSR | S_IRUGO, dir,
+			       &alignment_proc_fops, &se_usermode);
 	if (!res)
 		return -ENOMEM;
 
-	res->read_proc = proc_alignment_read;
-	res->write_proc = proc_alignment_write;
-
-        res = create_proc_entry("kernel_alignment", S_IWUSR | S_IRUGO, dir);
+        res = proc_create_data("kernel_alignment", S_IWUSR | S_IRUGO, dir,
+			       &alignment_proc_fops, &se_kernmode_warn);
         if (!res)
                 return -ENOMEM;
 
-        res->read_proc = proc_alignment_read;
-        res->write_proc = proc_alignment_kern_write;
-
 	return 0;
 }
 
diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c
index 267e5ebbb475..75c0cbe2eda0 100644
--- a/arch/sh/kernel/traps_64.c
+++ b/arch/sh/kernel/traps_64.c
@@ -877,44 +877,39 @@ static int misaligned_fixup(struct pt_regs *regs)
 
 static ctl_table unaligned_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "kernel_reports",
 		.data		= &kernel_mode_unaligned_fixup_count,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec
+		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "user_reports",
 		.data		= &user_mode_unaligned_fixup_count,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec
+		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "user_enable",
 		.data		= &user_mode_unaligned_fixup_enable,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec},
+		.proc_handler	= proc_dointvec},
 	{}
 };
 
 static ctl_table unaligned_root[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "unaligned_fixup",
 		.mode		= 0555,
-		unaligned_table
+		.child		= unaligned_table
 	},
 	{}
 };
 
 static ctl_table sh64_root[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sh64",
 		.mode		= 0555,
 		.child		= unaligned_root
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index a969b47c5463..dab4d2129812 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -2,7 +2,7 @@
 # Makefile for SuperH-specific library files..
 #
 
-lib-y  = delay.o memset.o memmove.o memchr.o \
+lib-y  = delay.o memmove.o memchr.o \
 	 checksum.o strlen.o div64.o div64-generic.o
 
 # Extracted from libgcc
@@ -23,8 +23,11 @@ obj-y				+= io.o
 memcpy-y			:= memcpy.o
 memcpy-$(CONFIG_CPU_SH4)	:= memcpy-sh4.o
 
+memset-y			:= memset.o
+memset-$(CONFIG_CPU_SH4)	:= memset-sh4.o
+
 lib-$(CONFIG_MMU)		+= copy_page.o __clear_user.o
 lib-$(CONFIG_MCOUNT)		+= mcount.o
-lib-y				+= $(memcpy-y) $(udivsi3-y)
+lib-y				+= $(memcpy-y) $(memset-y) $(udivsi3-y)
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/lib/memset-sh4.S b/arch/sh/lib/memset-sh4.S
new file mode 100644
index 000000000000..1a6e32cc4e4d
--- /dev/null
+++ b/arch/sh/lib/memset-sh4.S
@@ -0,0 +1,107 @@
+/*
+ * "memset" implementation for SH4
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ * Copyright (c) 2009  STMicroelectronics Limited
+ * Author: Stuart Menefy <stuart.menefy:st.com>
+ */
+
+/*
+ *            void *memset(void *s, int c, size_t n);
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(memset)
+	mov	#12,r0
+	add	r6,r4
+	cmp/gt	r6,r0
+	bt/s	40f		! if it's too small, set a byte at once
+	 mov	r4,r0
+	and	#3,r0
+	cmp/eq	#0,r0
+	bt/s	2f		! It's aligned
+	 sub	r0,r6
+1:
+	dt	r0
+	bf/s	1b
+	 mov.b	r5,@-r4
+2:				! make VVVV
+	extu.b	r5,r5
+	swap.b	r5,r0		!   V0
+	or	r0,r5		!   VV
+	swap.w	r5,r0		! VV00
+	or	r0,r5		! VVVV
+
+	! Check if enough bytes need to be copied to be worth the big loop
+	mov	#0x40, r0	! (MT)
+	cmp/gt	r6,r0		! (MT)  64 > len => slow loop
+
+	bt/s	22f
+	 mov	r6,r0
+
+	! align the dst to the cache block size if necessary
+	mov	r4, r3
+	mov	#~(0x1f), r1
+
+	and	r3, r1
+	cmp/eq	r3, r1
+
+	bt/s	11f		! dst is already aligned
+	 sub	r1, r3		! r3-r1 -> r3
+	shlr2	r3		! number of loops
+
+10:	mov.l	r5,@-r4
+	dt	r3
+	bf/s	10b
+	 add	#-4, r6
+
+11:	! dst is 32byte aligned
+	mov	r6,r2
+	mov	#-5,r0
+	shld	r0,r2		! number of loops
+
+	add	#-32, r4
+	mov	r5, r0
+12:
+	movca.l	r0,@r4
+	mov.l	r5,@(4, r4)
+	mov.l	r5,@(8, r4)
+	mov.l	r5,@(12,r4)
+	mov.l	r5,@(16,r4)
+	mov.l	r5,@(20,r4)
+	add	#-0x20, r6
+	mov.l	r5,@(24,r4)
+	dt	r2
+	mov.l	r5,@(28,r4)
+	bf/s	12b
+	 add	#-32, r4
+
+	add	#32, r4
+	mov	#8, r0
+	cmp/ge	r0, r6
+	bf	40f
+
+	mov	r6,r0
+22:
+	shlr2	r0
+	shlr	r0		! r0 = r6 >> 3
+3:
+	dt	r0
+	mov.l	r5,@-r4		! set 8-byte at once
+	bf/s	3b
+	 mov.l	r5,@-r4
+	!
+	mov	#7,r0
+	and	r0,r6
+
+	! fill bytes (length may be zero)
+40:	tst	r6,r6
+	bt	5f
+4:
+	dt	r6
+	bf/s	4b
+	 mov.b	r5,@-r4
+5:
+	rts
+	 mov	r4,r0
diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
index ac2d7abd2567..d6c15cae0912 100644
--- a/arch/sh/math-emu/math.c
+++ b/arch/sh/math-emu/math.c
@@ -558,7 +558,7 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 					    (finsn >> 8) & 0xf);
 			tsk->thread.fpu.hard.fpscr &=
 				~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
-			set_tsk_thread_flag(tsk, TIF_USEDFPU);
+			task_thread_info(tsk)->status |= TS_USEDFPU;
 		} else {
 			info.si_signo = SIGFPE;
 			info.si_errno = 0;
@@ -619,10 +619,10 @@ int do_fpu_inst(unsigned short inst, struct pt_regs *regs)
 	struct task_struct *tsk = current;
 	struct sh_fpu_soft_struct *fpu = &(tsk->thread.fpu.soft);
 
-	if (!test_tsk_thread_flag(tsk, TIF_USEDFPU)) {
+	if (!(task_thread_info(tsk)->status & TS_USEDFPU)) {
 		/* initialize once. */
 		fpu_init(fpu);
-		set_tsk_thread_flag(tsk, TIF_USEDFPU);
+		task_thread_info(tsk)->status |= TS_USEDFPU;
 	}
 
 	return fpu_emulate(inst, fpu, regs);
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 7f7b52f9beba..0e7ba8e891cf 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -82,8 +82,7 @@ config 32BIT
 
 config PMB_ENABLE
 	bool "Support 32-bit physical addressing through PMB"
-	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
-	select 32BIT
+	depends on MMU && EXPERIMENTAL && CPU_SH4A
 	default y
 	help
 	  If you say Y here, physical addressing will be extended to
@@ -97,8 +96,7 @@ choice
 
 config PMB
 	bool "PMB"
-	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
-	select 32BIT
+	depends on MMU && EXPERIMENTAL && CPU_SH4A
 	help
 	  If you say Y here, physical addressing will be extended to
 	  32-bits through the SH-4A PMB. If this is not set, legacy
@@ -106,9 +104,7 @@ config PMB
 
 config PMB_FIXED
 	bool "fixed PMB"
-	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || \
-					   CPU_SUBTYPE_SH7780 || \
-					   CPU_SUBTYPE_SH7785)
+	depends on MMU && EXPERIMENTAL && CPU_SH4A
 	select 32BIT
 	help
 	  If this option is enabled, fixed PMB mappings are inherited
@@ -258,6 +254,15 @@ endchoice
 
 source "mm/Kconfig"
 
+config SCHED_MC
+	bool "Multi-core scheduler support"
+	depends on SMP
+	default y
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
+
 endmenu
 
 menu "Cache configuration"
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 3759bf853293..8a70535fa7ce 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -33,8 +33,7 @@ obj-y				+= $(tlb-y)
 endif
 
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-obj-$(CONFIG_PMB)		+= pmb.o
-obj-$(CONFIG_PMB_FIXED)		+= pmb-fixed.o
+obj-$(CONFIG_PMB_ENABLE)	+= pmb.o
 obj-$(CONFIG_NUMA)		+= numa.o
 
 # Special flags for fault_64.o.  This puts restrictions on the number of
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index b7f235c74d66..f36a08bf3d5c 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -2,7 +2,7 @@
  * arch/sh/mm/cache-sh4.c
  *
  * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- * Copyright (C) 2001 - 2007  Paul Mundt
+ * Copyright (C) 2001 - 2009  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
  * Copyright (c) 2007 STMicroelectronics (R&D) Ltd.
  *
@@ -15,6 +15,8 @@
 #include <linux/io.h>
 #include <linux/mutex.h>
 #include <linux/fs.h>
+#include <linux/highmem.h>
+#include <asm/pgtable.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
@@ -23,21 +25,12 @@
  * flushing. Anything exceeding this will simply flush the dcache in its
  * entirety.
  */
-#define MAX_DCACHE_PAGES	64	/* XXX: Tune for ways */
 #define MAX_ICACHE_PAGES	32
 
 static void __flush_cache_one(unsigned long addr, unsigned long phys,
 			       unsigned long exec_offset);
 
 /*
- * This is initialised here to ensure that it is not placed in the BSS.  If
- * that were to happen, note that cache_init gets called before the BSS is
- * cleared, so this would get nulled out which would be hopeless.
- */
-static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
-	(void (*)(unsigned long, unsigned long))0xdeadbeef;
-
-/*
  * Write back the range of D-cache, and purge the I-cache.
  *
  * Called from kernel/module.c:sys_init_module and routine for a.out format,
@@ -97,15 +90,15 @@ static inline void flush_cache_one(unsigned long start, unsigned long phys)
 	unsigned long flags, exec_offset = 0;
 
 	/*
-	 * All types of SH-4 require PC to be in P2 to operate on the I-cache.
-	 * Some types of SH-4 require PC to be in P2 to operate on the D-cache.
+	 * All types of SH-4 require PC to be uncached to operate on the I-cache.
+	 * Some types of SH-4 require PC to be uncached to operate on the D-cache.
 	 */
 	if ((boot_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) ||
 	    (start < CACHE_OC_ADDRESS_ARRAY))
-		exec_offset = 0x20000000;
+		exec_offset = cached_to_uncached;
 
 	local_irq_save(flags);
-	__flush_cache_one(start | SH_CACHE_ASSOC, P1SEGADDR(phys), exec_offset);
+	__flush_cache_one(start, phys, exec_offset);
 	local_irq_restore(flags);
 }
 
@@ -124,7 +117,7 @@ static void sh4_flush_dcache_page(void *arg)
 	else
 #endif
 	{
-		unsigned long phys = PHYSADDR(page_address(page));
+		unsigned long phys = page_to_phys(page);
 		unsigned long addr = CACHE_OC_ADDRESS_ARRAY;
 		int i, n;
 
@@ -159,10 +152,27 @@ static void __uses_jump_to_uncached flush_icache_all(void)
 	local_irq_restore(flags);
 }
 
-static inline void flush_dcache_all(void)
+static void flush_dcache_all(void)
 {
-	(*__flush_dcache_segment_fn)(0UL, boot_cpu_data.dcache.way_size);
-	wmb();
+	unsigned long addr, end_addr, entry_offset;
+
+	end_addr = CACHE_OC_ADDRESS_ARRAY +
+		(current_cpu_data.dcache.sets <<
+		 current_cpu_data.dcache.entry_shift) *
+			current_cpu_data.dcache.ways;
+
+	entry_offset = 1 << current_cpu_data.dcache.entry_shift;
+
+	for (addr = CACHE_OC_ADDRESS_ARRAY; addr < end_addr; ) {
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+		__raw_writel(0, addr); addr += entry_offset;
+	}
 }
 
 static void sh4_flush_cache_all(void *unused)
@@ -171,89 +181,13 @@ static void sh4_flush_cache_all(void *unused)
 	flush_icache_all();
 }
 
-static void __flush_cache_mm(struct mm_struct *mm, unsigned long start,
-			     unsigned long end)
-{
-	unsigned long d = 0, p = start & PAGE_MASK;
-	unsigned long alias_mask = boot_cpu_data.dcache.alias_mask;
-	unsigned long n_aliases = boot_cpu_data.dcache.n_aliases;
-	unsigned long select_bit;
-	unsigned long all_aliases_mask;
-	unsigned long addr_offset;
-	pgd_t *dir;
-	pmd_t *pmd;
-	pud_t *pud;
-	pte_t *pte;
-	int i;
-
-	dir = pgd_offset(mm, p);
-	pud = pud_offset(dir, p);
-	pmd = pmd_offset(pud, p);
-	end = PAGE_ALIGN(end);
-
-	all_aliases_mask = (1 << n_aliases) - 1;
-
-	do {
-		if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) {
-			p &= PMD_MASK;
-			p += PMD_SIZE;
-			pmd++;
-
-			continue;
-		}
-
-		pte = pte_offset_kernel(pmd, p);
-
-		do {
-			unsigned long phys;
-			pte_t entry = *pte;
-
-			if (!(pte_val(entry) & _PAGE_PRESENT)) {
-				pte++;
-				p += PAGE_SIZE;
-				continue;
-			}
-
-			phys = pte_val(entry) & PTE_PHYS_MASK;
-
-			if ((p ^ phys) & alias_mask) {
-				d |= 1 << ((p & alias_mask) >> PAGE_SHIFT);
-				d |= 1 << ((phys & alias_mask) >> PAGE_SHIFT);
-
-				if (d == all_aliases_mask)
-					goto loop_exit;
-			}
-
-			pte++;
-			p += PAGE_SIZE;
-		} while (p < end && ((unsigned long)pte & ~PAGE_MASK));
-		pmd++;
-	} while (p < end);
-
-loop_exit:
-	addr_offset = 0;
-	select_bit = 1;
-
-	for (i = 0; i < n_aliases; i++) {
-		if (d & select_bit) {
-			(*__flush_dcache_segment_fn)(addr_offset, PAGE_SIZE);
-			wmb();
-		}
-
-		select_bit <<= 1;
-		addr_offset += PAGE_SIZE;
-	}
-}
-
 /*
  * Note : (RPC) since the caches are physically tagged, the only point
  * of flush_cache_mm for SH-4 is to get rid of aliases from the
  * D-cache.  The assumption elsewhere, e.g. flush_cache_range, is that
  * lines can stay resident so long as the virtual address they were
  * accessed with (hence cache set) is in accord with the physical
- * address (i.e. tag).  It's no different here.  So I reckon we don't
- * need to flush the I-cache, since aliases don't matter for that.  We
- * should try that.
+ * address (i.e. tag).  It's no different here.
  *
  * Caller takes mm->mmap_sem.
  */
@@ -264,33 +198,7 @@ static void sh4_flush_cache_mm(void *arg)
 	if (cpu_context(smp_processor_id(), mm) == NO_CONTEXT)
 		return;
 
-	/*
-	 * If cache is only 4k-per-way, there are never any 'aliases'.  Since
-	 * the cache is physically tagged, the data can just be left in there.
-	 */
-	if (boot_cpu_data.dcache.n_aliases == 0)
-		return;
-
-	/*
-	 * Don't bother groveling around the dcache for the VMA ranges
-	 * if there are too many PTEs to make it worthwhile.
-	 */
-	if (mm->nr_ptes >= MAX_DCACHE_PAGES)
-		flush_dcache_all();
-	else {
-		struct vm_area_struct *vma;
-
-		/*
-		 * In this case there are reasonably sized ranges to flush,
-		 * iterate through the VMA list and take care of any aliases.
-		 */
-		for (vma = mm->mmap; vma; vma = vma->vm_next)
-			__flush_cache_mm(mm, vma->vm_start, vma->vm_end);
-	}
-
-	/* Only touch the icache if one of the VMAs has VM_EXEC set. */
-	if (mm->exec_vm)
-		flush_icache_all();
+	flush_dcache_all();
 }
 
 /*
@@ -303,44 +211,63 @@ static void sh4_flush_cache_page(void *args)
 {
 	struct flusher_data *data = args;
 	struct vm_area_struct *vma;
+	struct page *page;
 	unsigned long address, pfn, phys;
-	unsigned int alias_mask;
+	int map_coherent = 0;
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+	void *vaddr;
 
 	vma = data->vma;
-	address = data->addr1;
+	address = data->addr1 & PAGE_MASK;
 	pfn = data->addr2;
 	phys = pfn << PAGE_SHIFT;
+	page = pfn_to_page(pfn);
 
 	if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
 		return;
 
-	alias_mask = boot_cpu_data.dcache.alias_mask;
-
-	/* We only need to flush D-cache when we have alias */
-	if ((address^phys) & alias_mask) {
-		/* Loop 4K of the D-cache */
-		flush_cache_one(
-			CACHE_OC_ADDRESS_ARRAY | (address & alias_mask),
-			phys);
-		/* Loop another 4K of the D-cache */
-		flush_cache_one(
-			CACHE_OC_ADDRESS_ARRAY | (phys & alias_mask),
-			phys);
-	}
+	pgd = pgd_offset(vma->vm_mm, address);
+	pud = pud_offset(pgd, address);
+	pmd = pmd_offset(pud, address);
+	pte = pte_offset_kernel(pmd, address);
+
+	/* If the page isn't present, there is nothing to do here. */
+	if (!(pte_val(*pte) & _PAGE_PRESENT))
+		return;
 
-	alias_mask = boot_cpu_data.icache.alias_mask;
-	if (vma->vm_flags & VM_EXEC) {
+	if ((vma->vm_mm == current->active_mm))
+		vaddr = NULL;
+	else {
 		/*
-		 * Evict entries from the portion of the cache from which code
-		 * may have been executed at this address (virtual).  There's
-		 * no need to evict from the portion corresponding to the
-		 * physical address as for the D-cache, because we know the
-		 * kernel has never executed the code through its identity
-		 * translation.
+		 * Use kmap_coherent or kmap_atomic to do flushes for
+		 * another ASID than the current one.
 		 */
-		flush_cache_one(
-			CACHE_IC_ADDRESS_ARRAY | (address & alias_mask),
-			phys);
+		map_coherent = (current_cpu_data.dcache.n_aliases &&
+			!test_bit(PG_dcache_dirty, &page->flags) &&
+			page_mapped(page));
+		if (map_coherent)
+			vaddr = kmap_coherent(page, address);
+		else
+			vaddr = kmap_atomic(page, KM_USER0);
+
+		address = (unsigned long)vaddr;
+	}
+
+	if (pages_do_alias(address, phys))
+		flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
+			(address & shm_align_mask), phys);
+
+	if (vma->vm_flags & VM_EXEC)
+		flush_icache_all();
+
+	if (vaddr) {
+		if (map_coherent)
+			kunmap_coherent(vaddr);
+		else
+			kunmap_atomic(vaddr, KM_USER0);
 	}
 }
 
@@ -373,24 +300,10 @@ static void sh4_flush_cache_range(void *args)
 	if (boot_cpu_data.dcache.n_aliases == 0)
 		return;
 
-	/*
-	 * Don't bother with the lookup and alias check if we have a
-	 * wide range to cover, just blow away the dcache in its
-	 * entirety instead. -- PFM.
-	 */
-	if (((end - start) >> PAGE_SHIFT) >= MAX_DCACHE_PAGES)
-		flush_dcache_all();
-	else
-		__flush_cache_mm(vma->vm_mm, start, end);
+	flush_dcache_all();
 
-	if (vma->vm_flags & VM_EXEC) {
-		/*
-		 * TODO: Is this required???  Need to look at how I-cache
-		 * coherency is assured when new programs are loaded to see if
-		 * this matters.
-		 */
+	if (vma->vm_flags & VM_EXEC)
 		flush_icache_all();
-	}
 }
 
 /**
@@ -464,245 +377,6 @@ static void __flush_cache_one(unsigned long addr, unsigned long phys,
 	} while (--way_count != 0);
 }
 
-/*
- * Break the 1, 2 and 4 way variants of this out into separate functions to
- * avoid nearly all the overhead of having the conditional stuff in the function
- * bodies (+ the 1 and 2 way cases avoid saving any registers too).
- *
- * We want to eliminate unnecessary bus transactions, so this code uses
- * a non-obvious technique.
- *
- * Loop over a cache way sized block of, one cache line at a time. For each
- * line, use movca.a to cause the current cache line contents to be written
- * back, but without reading anything from main memory. However this has the
- * side effect that the cache is now caching that memory location. So follow
- * this with a cache invalidate to mark the cache line invalid. And do all
- * this with interrupts disabled, to avoid the cache line being accidently
- * evicted while it is holding garbage.
- *
- * This also breaks in a number of circumstances:
- * - if there are modifications to the region of memory just above
- *   empty_zero_page (for example because a breakpoint has been placed
- *   there), then these can be lost.
- *
- *   This is because the the memory address which the cache temporarily
- *   caches in the above description is empty_zero_page. So the
- *   movca.l hits the cache (it is assumed that it misses, or at least
- *   isn't dirty), modifies the line and then invalidates it, losing the
- *   required change.
- *
- * - If caches are disabled or configured in write-through mode, then
- *   the movca.l writes garbage directly into memory.
- */
-static void __flush_dcache_segment_writethrough(unsigned long start,
-					        unsigned long extent_per_way)
-{
-	unsigned long addr;
-	int i;
-
-	addr = CACHE_OC_ADDRESS_ARRAY | (start & cpu_data->dcache.entry_mask);
-
-	while (extent_per_way) {
-		for (i = 0; i < cpu_data->dcache.ways; i++)
-			__raw_writel(0, addr + cpu_data->dcache.way_incr * i);
-
-		addr += cpu_data->dcache.linesz;
-		extent_per_way -= cpu_data->dcache.linesz;
-	}
-}
-
-static void __flush_dcache_segment_1way(unsigned long start,
-					unsigned long extent_per_way)
-{
-	unsigned long orig_sr, sr_with_bl;
-	unsigned long base_addr;
-	unsigned long way_incr, linesz, way_size;
-	struct cache_info *dcache;
-	register unsigned long a0, a0e;
-
-	asm volatile("stc sr, %0" : "=r" (orig_sr));
-	sr_with_bl = orig_sr | (1<<28);
-	base_addr = ((unsigned long)&empty_zero_page[0]);
-
-	/*
-	 * The previous code aligned base_addr to 16k, i.e. the way_size of all
-	 * existing SH-4 D-caches.  Whilst I don't see a need to have this
-	 * aligned to any better than the cache line size (which it will be
-	 * anyway by construction), let's align it to at least the way_size of
-	 * any existing or conceivable SH-4 D-cache.  -- RPC
-	 */
-	base_addr = ((base_addr >> 16) << 16);
-	base_addr |= start;
-
-	dcache = &boot_cpu_data.dcache;
-	linesz = dcache->linesz;
-	way_incr = dcache->way_incr;
-	way_size = dcache->way_size;
-
-	a0 = base_addr;
-	a0e = base_addr + extent_per_way;
-	do {
-		asm volatile("ldc %0, sr" : : "r" (sr_with_bl));
-		asm volatile("movca.l r0, @%0\n\t"
-			     "ocbi @%0" : : "r" (a0));
-		a0 += linesz;
-		asm volatile("movca.l r0, @%0\n\t"
-			     "ocbi @%0" : : "r" (a0));
-		a0 += linesz;
-		asm volatile("movca.l r0, @%0\n\t"
-			     "ocbi @%0" : : "r" (a0));
-		a0 += linesz;
-		asm volatile("movca.l r0, @%0\n\t"
-			     "ocbi @%0" : : "r" (a0));
-		asm volatile("ldc %0, sr" : : "r" (orig_sr));
-		a0 += linesz;
-	} while (a0 < a0e);
-}
-
-static void __flush_dcache_segment_2way(unsigned long start,
-					unsigned long extent_per_way)
-{
-	unsigned long orig_sr, sr_with_bl;
-	unsigned long base_addr;
-	unsigned long way_incr, linesz, way_size;
-	struct cache_info *dcache;
-	register unsigned long a0, a1, a0e;
-
-	asm volatile("stc sr, %0" : "=r" (orig_sr));
-	sr_with_bl = orig_sr | (1<<28);
-	base_addr = ((unsigned long)&empty_zero_page[0]);
-
-	/* See comment under 1-way above */
-	base_addr = ((base_addr >> 16) << 16);
-	base_addr |= start;
-
-	dcache = &boot_cpu_data.dcache;
-	linesz = dcache->linesz;
-	way_incr = dcache->way_incr;
-	way_size = dcache->way_size;
-
-	a0 = base_addr;
-	a1 = a0 + way_incr;
-	a0e = base_addr + extent_per_way;
-	do {
-		asm volatile("ldc %0, sr" : : "r" (sr_with_bl));
-		asm volatile("movca.l r0, @%0\n\t"
-			     "movca.l r0, @%1\n\t"
-			     "ocbi @%0\n\t"
-			     "ocbi @%1" : :
-			     "r" (a0), "r" (a1));
-		a0 += linesz;
-		a1 += linesz;
-		asm volatile("movca.l r0, @%0\n\t"
-			     "movca.l r0, @%1\n\t"
-			     "ocbi @%0\n\t"
-			     "ocbi @%1" : :
-			     "r" (a0), "r" (a1));
-		a0 += linesz;
-		a1 += linesz;
-		asm volatile("movca.l r0, @%0\n\t"
-			     "movca.l r0, @%1\n\t"
-			     "ocbi @%0\n\t"
-			     "ocbi @%1" : :
-			     "r" (a0), "r" (a1));
-		a0 += linesz;
-		a1 += linesz;
-		asm volatile("movca.l r0, @%0\n\t"
-			     "movca.l r0, @%1\n\t"
-			     "ocbi @%0\n\t"
-			     "ocbi @%1" : :
-			     "r" (a0), "r" (a1));
-		asm volatile("ldc %0, sr" : : "r" (orig_sr));
-		a0 += linesz;
-		a1 += linesz;
-	} while (a0 < a0e);
-}
-
-static void __flush_dcache_segment_4way(unsigned long start,
-					unsigned long extent_per_way)
-{
-	unsigned long orig_sr, sr_with_bl;
-	unsigned long base_addr;
-	unsigned long way_incr, linesz, way_size;
-	struct cache_info *dcache;
-	register unsigned long a0, a1, a2, a3, a0e;
-
-	asm volatile("stc sr, %0" : "=r" (orig_sr));
-	sr_with_bl = orig_sr | (1<<28);
-	base_addr = ((unsigned long)&empty_zero_page[0]);
-
-	/* See comment under 1-way above */
-	base_addr = ((base_addr >> 16) << 16);
-	base_addr |= start;
-
-	dcache = &boot_cpu_data.dcache;
-	linesz = dcache->linesz;
-	way_incr = dcache->way_incr;
-	way_size = dcache->way_size;
-
-	a0 = base_addr;
-	a1 = a0 + way_incr;
-	a2 = a1 + way_incr;
-	a3 = a2 + way_incr;
-	a0e = base_addr + extent_per_way;
-	do {
-		asm volatile("ldc %0, sr" : : "r" (sr_with_bl));
-		asm volatile("movca.l r0, @%0\n\t"
-			     "movca.l r0, @%1\n\t"
-			     "movca.l r0, @%2\n\t"
-			     "movca.l r0, @%3\n\t"
-			     "ocbi @%0\n\t"
-			     "ocbi @%1\n\t"
-			     "ocbi @%2\n\t"
-			     "ocbi @%3\n\t" : :
-			     "r" (a0), "r" (a1), "r" (a2), "r" (a3));
-		a0 += linesz;
-		a1 += linesz;
-		a2 += linesz;
-		a3 += linesz;
-		asm volatile("movca.l r0, @%0\n\t"
-			     "movca.l r0, @%1\n\t"
-			     "movca.l r0, @%2\n\t"
-			     "movca.l r0, @%3\n\t"
-			     "ocbi @%0\n\t"
-			     "ocbi @%1\n\t"
-			     "ocbi @%2\n\t"
-			     "ocbi @%3\n\t" : :
-			     "r" (a0), "r" (a1), "r" (a2), "r" (a3));
-		a0 += linesz;
-		a1 += linesz;
-		a2 += linesz;
-		a3 += linesz;
-		asm volatile("movca.l r0, @%0\n\t"
-			     "movca.l r0, @%1\n\t"
-			     "movca.l r0, @%2\n\t"
-			     "movca.l r0, @%3\n\t"
-			     "ocbi @%0\n\t"
-			     "ocbi @%1\n\t"
-			     "ocbi @%2\n\t"
-			     "ocbi @%3\n\t" : :
-			     "r" (a0), "r" (a1), "r" (a2), "r" (a3));
-		a0 += linesz;
-		a1 += linesz;
-		a2 += linesz;
-		a3 += linesz;
-		asm volatile("movca.l r0, @%0\n\t"
-			     "movca.l r0, @%1\n\t"
-			     "movca.l r0, @%2\n\t"
-			     "movca.l r0, @%3\n\t"
-			     "ocbi @%0\n\t"
-			     "ocbi @%1\n\t"
-			     "ocbi @%2\n\t"
-			     "ocbi @%3\n\t" : :
-			     "r" (a0), "r" (a1), "r" (a2), "r" (a3));
-		asm volatile("ldc %0, sr" : : "r" (orig_sr));
-		a0 += linesz;
-		a1 += linesz;
-		a2 += linesz;
-		a3 += linesz;
-	} while (a0 < a0e);
-}
-
 extern void __weak sh4__flush_region_init(void);
 
 /*
@@ -710,32 +384,11 @@ extern void __weak sh4__flush_region_init(void);
  */
 void __init sh4_cache_init(void)
 {
-	unsigned int wt_enabled = !!(__raw_readl(CCR) & CCR_CACHE_WT);
-
 	printk("PVR=%08x CVR=%08x PRR=%08x\n",
 		ctrl_inl(CCN_PVR),
 		ctrl_inl(CCN_CVR),
 		ctrl_inl(CCN_PRR));
 
-	if (wt_enabled)
-		__flush_dcache_segment_fn = __flush_dcache_segment_writethrough;
-	else {
-		switch (boot_cpu_data.dcache.ways) {
-		case 1:
-			__flush_dcache_segment_fn = __flush_dcache_segment_1way;
-			break;
-		case 2:
-			__flush_dcache_segment_fn = __flush_dcache_segment_2way;
-			break;
-		case 4:
-			__flush_dcache_segment_fn = __flush_dcache_segment_4way;
-			break;
-		default:
-			panic("unknown number of cache ways\n");
-			break;
-		}
-	}
-
 	local_flush_icache_range	= sh4_flush_icache_range;
 	local_flush_dcache_page		= sh4_flush_dcache_page;
 	local_flush_cache_all		= sh4_flush_cache_all;
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 467ff8e260f7..eb4cc4ec7952 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -563,7 +563,7 @@ static void sh5_flush_cache_page(void *args)
 
 static void sh5_flush_dcache_page(void *page)
 {
-	sh64_dcache_purge_phy_page(page_to_phys(page));
+	sh64_dcache_purge_phy_page(page_to_phys((struct page *)page));
 	wmb();
 }
 
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index 2601935eb589..f527fb70fce6 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -141,7 +141,7 @@ static void sh7705_flush_dcache_page(void *arg)
 	if (mapping && !mapping_mapped(mapping))
 		set_bit(PG_dcache_dirty, &page->flags);
 	else
-		__flush_dcache_page(PHYSADDR(page_address(page)));
+		__flush_dcache_page(__pa(page_address(page)));
 }
 
 static void __uses_jump_to_uncached sh7705_flush_cache_all(void *args)
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index a2dc7f9ecc51..e9415d3ea94a 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -27,8 +27,11 @@ void (*local_flush_icache_page)(void *args) = cache_noop;
 void (*local_flush_cache_sigtramp)(void *args) = cache_noop;
 
 void (*__flush_wback_region)(void *start, int size);
+EXPORT_SYMBOL(__flush_wback_region);
 void (*__flush_purge_region)(void *start, int size);
+EXPORT_SYMBOL(__flush_purge_region);
 void (*__flush_invalidate_region)(void *start, int size);
+EXPORT_SYMBOL(__flush_invalidate_region);
 
 static inline void noop__flush_region(void *start, int size)
 {
@@ -161,14 +164,21 @@ void flush_cache_all(void)
 {
 	cacheop_on_each_cpu(local_flush_cache_all, NULL, 1);
 }
+EXPORT_SYMBOL(flush_cache_all);
 
 void flush_cache_mm(struct mm_struct *mm)
 {
+	if (boot_cpu_data.dcache.n_aliases == 0)
+		return;
+
 	cacheop_on_each_cpu(local_flush_cache_mm, mm, 1);
 }
 
 void flush_cache_dup_mm(struct mm_struct *mm)
 {
+	if (boot_cpu_data.dcache.n_aliases == 0)
+		return;
+
 	cacheop_on_each_cpu(local_flush_cache_dup_mm, mm, 1);
 }
 
@@ -195,11 +205,13 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 
 	cacheop_on_each_cpu(local_flush_cache_range, (void *)&data, 1);
 }
+EXPORT_SYMBOL(flush_cache_range);
 
 void flush_dcache_page(struct page *page)
 {
 	cacheop_on_each_cpu(local_flush_dcache_page, page, 1);
 }
+EXPORT_SYMBOL(flush_dcache_page);
 
 void flush_icache_range(unsigned long start, unsigned long end)
 {
@@ -265,7 +277,11 @@ static void __init emit_cache_params(void)
 
 void __init cpu_cache_init(void)
 {
-	unsigned int cache_disabled = !(__raw_readl(CCR) & CCR_CACHE_ENABLE);
+	unsigned int cache_disabled = 0;
+
+#ifdef CCR
+	cache_disabled = !(__raw_readl(CCR) & CCR_CACHE_ENABLE);
+#endif
 
 	compute_alias(&boot_cpu_data.icache);
 	compute_alias(&boot_cpu_data.dcache);
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index e098ec158ddb..902967e3f841 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -15,11 +15,15 @@
 #include <linux/dma-mapping.h>
 #include <linux/dma-debug.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <asm/cacheflush.h>
 #include <asm/addrspace.h>
 
 #define PREALLOC_DMA_DEBUG_ENTRIES	4096
 
+struct dma_map_ops *dma_ops;
+EXPORT_SYMBOL(dma_ops);
+
 static int __init dma_init(void)
 {
 	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
@@ -27,15 +31,12 @@ static int __init dma_init(void)
 }
 fs_initcall(dma_init);
 
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, gfp_t gfp)
+void *dma_generic_alloc_coherent(struct device *dev, size_t size,
+				 dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret, *ret_nocache;
 	int order = get_order(size);
 
-	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
-		return ret;
-
 	ret = (void *)__get_free_pages(gfp, order);
 	if (!ret)
 		return NULL;
@@ -57,35 +58,26 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 
 	*dma_handle = virt_to_phys(ret);
 
-	debug_dma_alloc_coherent(dev, size, *dma_handle, ret_nocache);
-
 	return ret_nocache;
 }
-EXPORT_SYMBOL(dma_alloc_coherent);
 
-void dma_free_coherent(struct device *dev, size_t size,
-			 void *vaddr, dma_addr_t dma_handle)
+void dma_generic_free_coherent(struct device *dev, size_t size,
+			       void *vaddr, dma_addr_t dma_handle)
 {
 	int order = get_order(size);
 	unsigned long pfn = dma_handle >> PAGE_SHIFT;
 	int k;
 
-	WARN_ON(irqs_disabled());	/* for portability */
-
-	if (dma_release_from_coherent(dev, order, vaddr))
-		return;
-
-	debug_dma_free_coherent(dev, size, vaddr, dma_handle);
 	for (k = 0; k < (1 << order); k++)
 		__free_pages(pfn_to_page(pfn + k), 0);
+
 	iounmap(vaddr);
 }
-EXPORT_SYMBOL(dma_free_coherent);
 
 void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		    enum dma_data_direction direction)
 {
-#ifdef CONFIG_CPU_SH5
+#if defined(CONFIG_CPU_SH5) || defined(CONFIG_PMB)
 	void *p1addr = vaddr;
 #else
 	void *p1addr = (void*) P1SEGADDR((unsigned long)vaddr);
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 8173e38afd38..432acd07e76a 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -15,6 +15,7 @@
 #include <linux/pagemap.h>
 #include <linux/percpu.h>
 #include <linux/io.h>
+#include <linux/dma-mapping.h>
 #include <asm/mmu_context.h>
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
@@ -186,11 +187,21 @@ void __init paging_init(void)
 	set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start));
 }
 
+/*
+ * Early initialization for any I/O MMUs we might have.
+ */
+static void __init iommu_init(void)
+{
+	no_iommu_init();
+}
+
 void __init mem_init(void)
 {
 	int codesize, datasize, initsize;
 	int nid;
 
+	iommu_init();
+
 	num_physpages = 0;
 	high_memory = NULL;
 
@@ -323,4 +334,12 @@ int memory_add_physaddr_to_nid(u64 addr)
 }
 EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
 #endif
+
 #endif /* CONFIG_MEMORY_HOTPLUG */
+
+#ifdef CONFIG_PMB
+int __in_29bit_mode(void)
+{
+	return !(ctrl_inl(PMB_PASCR) & PASCR_SE);
+}
+#endif /* CONFIG_PMB */
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
index 16e01b5fed04..15d74ea42094 100644
--- a/arch/sh/mm/kmap.c
+++ b/arch/sh/mm/kmap.c
@@ -39,7 +39,9 @@ void *kmap_coherent(struct page *page, unsigned long addr)
 	pagefault_disable();
 
 	idx = FIX_CMAP_END -
-		((addr & current_cpu_data.dcache.alias_mask) >> PAGE_SHIFT);
+		(((addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1)) +
+		 (FIX_N_COLOURS * smp_processor_id()));
+
 	vaddr = __fix_to_virt(idx);
 
 	BUG_ON(!pte_none(*(kmap_coherent_pte - idx)));
diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c
index d2984fa42d3d..afeb710ec5c3 100644
--- a/arch/sh/mm/mmap.c
+++ b/arch/sh/mm/mmap.c
@@ -54,7 +54,8 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		/* We do not accept a shared mapping if it would violate
 		 * cache aliasing constraints.
 		 */
-		if ((flags & MAP_SHARED) && (addr & shm_align_mask))
+		if ((flags & MAP_SHARED) &&
+		    ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
 			return -EINVAL;
 		return addr;
 	}
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index 9b784fdb947c..6c524446c0f6 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -60,7 +60,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 	unsigned long bootmem_paddr;
 
 	/* Don't allow bogus node assignment */
-	BUG_ON(nid > MAX_NUMNODES || nid == 0);
+	BUG_ON(nid > MAX_NUMNODES || nid <= 0);
 
 	start_pfn = start >> PAGE_SHIFT;
 	end_pfn = end >> PAGE_SHIFT;
diff --git a/arch/sh/mm/pmb-fixed.c b/arch/sh/mm/pmb-fixed.c
deleted file mode 100644
index 43c8eac4d8a1..000000000000
--- a/arch/sh/mm/pmb-fixed.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * arch/sh/mm/fixed_pmb.c
- *
- * Copyright (C) 2009  Renesas Solutions Corp.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <asm/mmu.h>
-#include <asm/mmu_context.h>
-
-static int __uses_jump_to_uncached fixed_pmb_init(void)
-{
-	int i;
-	unsigned long addr, data;
-
-	jump_to_uncached();
-
-	for (i = 0; i < PMB_ENTRY_MAX; i++) {
-		addr = PMB_DATA + (i << PMB_E_SHIFT);
-		data = ctrl_inl(addr);
-		if (!(data & PMB_V))
-			continue;
-
-		if (data & PMB_C) {
-#if defined(CONFIG_CACHE_WRITETHROUGH)
-			data |= PMB_WT;
-#elif defined(CONFIG_CACHE_WRITEBACK)
-			data &= ~PMB_WT;
-#else
-			data &= ~(PMB_C | PMB_WT);
-#endif
-		}
-		ctrl_outl(data, addr);
-	}
-
-	back_to_cached();
-
-	return 0;
-}
-arch_initcall(fixed_pmb_init);
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index aade31102112..280f6a166035 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -35,29 +35,9 @@
 
 static void __pmb_unmap(struct pmb_entry *);
 
-static struct kmem_cache *pmb_cache;
+static struct pmb_entry pmb_entry_list[NR_PMB_ENTRIES];
 static unsigned long pmb_map;
 
-static struct pmb_entry pmb_init_map[] = {
-	/* vpn         ppn         flags (ub/sz/c/wt) */
-
-	/* P1 Section Mappings */
-	{ 0x80000000, 0x00000000, PMB_SZ_64M  | PMB_C, },
-	{ 0x84000000, 0x04000000, PMB_SZ_64M  | PMB_C, },
-	{ 0x88000000, 0x08000000, PMB_SZ_128M | PMB_C, },
-	{ 0x90000000, 0x10000000, PMB_SZ_64M  | PMB_C, },
-	{ 0x94000000, 0x14000000, PMB_SZ_64M  | PMB_C, },
-	{ 0x98000000, 0x18000000, PMB_SZ_64M  | PMB_C, },
-
-	/* P2 Section Mappings */
-	{ 0xa0000000, 0x00000000, PMB_UB | PMB_SZ_64M  | PMB_WT, },
-	{ 0xa4000000, 0x04000000, PMB_UB | PMB_SZ_64M  | PMB_WT, },
-	{ 0xa8000000, 0x08000000, PMB_UB | PMB_SZ_128M | PMB_WT, },
-	{ 0xb0000000, 0x10000000, PMB_UB | PMB_SZ_64M  | PMB_WT, },
-	{ 0xb4000000, 0x14000000, PMB_UB | PMB_SZ_64M  | PMB_WT, },
-	{ 0xb8000000, 0x18000000, PMB_UB | PMB_SZ_64M  | PMB_WT, },
-};
-
 static inline unsigned long mk_pmb_entry(unsigned int entry)
 {
 	return (entry & PMB_E_MASK) << PMB_E_SHIFT;
@@ -73,81 +53,68 @@ static inline unsigned long mk_pmb_data(unsigned int entry)
 	return mk_pmb_entry(entry) | PMB_DATA;
 }
 
-static DEFINE_SPINLOCK(pmb_list_lock);
-static struct pmb_entry *pmb_list;
-
-static inline void pmb_list_add(struct pmb_entry *pmbe)
+static int pmb_alloc_entry(void)
 {
-	struct pmb_entry **p, *tmp;
+	unsigned int pos;
 
-	p = &pmb_list;
-	while ((tmp = *p) != NULL)
-		p = &tmp->next;
+repeat:
+	pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES);
 
-	pmbe->next = tmp;
-	*p = pmbe;
-}
+	if (unlikely(pos > NR_PMB_ENTRIES))
+		return -ENOSPC;
 
-static inline void pmb_list_del(struct pmb_entry *pmbe)
-{
-	struct pmb_entry **p, *tmp;
+	if (test_and_set_bit(pos, &pmb_map))
+		goto repeat;
 
-	for (p = &pmb_list; (tmp = *p); p = &tmp->next)
-		if (tmp == pmbe) {
-			*p = tmp->next;
-			return;
-		}
+	return pos;
 }
 
-struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
-			    unsigned long flags)
+static struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
+				   unsigned long flags, int entry)
 {
 	struct pmb_entry *pmbe;
+	int pos;
+
+	if (entry == PMB_NO_ENTRY) {
+		pos = pmb_alloc_entry();
+		if (pos < 0)
+			return ERR_PTR(pos);
+	} else {
+		if (test_bit(entry, &pmb_map))
+			return ERR_PTR(-ENOSPC);
+		pos = entry;
+	}
 
-	pmbe = kmem_cache_alloc(pmb_cache, GFP_KERNEL);
+	pmbe = &pmb_entry_list[pos];
 	if (!pmbe)
 		return ERR_PTR(-ENOMEM);
 
 	pmbe->vpn	= vpn;
 	pmbe->ppn	= ppn;
 	pmbe->flags	= flags;
-
-	spin_lock_irq(&pmb_list_lock);
-	pmb_list_add(pmbe);
-	spin_unlock_irq(&pmb_list_lock);
+	pmbe->entry	= pos;
 
 	return pmbe;
 }
 
-void pmb_free(struct pmb_entry *pmbe)
+static void pmb_free(struct pmb_entry *pmbe)
 {
-	spin_lock_irq(&pmb_list_lock);
-	pmb_list_del(pmbe);
-	spin_unlock_irq(&pmb_list_lock);
+	int pos = pmbe->entry;
 
-	kmem_cache_free(pmb_cache, pmbe);
+	pmbe->vpn	= 0;
+	pmbe->ppn	= 0;
+	pmbe->flags	= 0;
+	pmbe->entry	= 0;
+
+	clear_bit(pos, &pmb_map);
 }
 
 /*
  * Must be in P2 for __set_pmb_entry()
  */
-int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
-		    unsigned long flags, int *entry)
+static void __set_pmb_entry(unsigned long vpn, unsigned long ppn,
+			    unsigned long flags, int pos)
 {
-	unsigned int pos = *entry;
-
-	if (unlikely(pos == PMB_NO_ENTRY))
-		pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES);
-
-repeat:
-	if (unlikely(pos > NR_PMB_ENTRIES))
-		return -ENOSPC;
-
-	if (test_and_set_bit(pos, &pmb_map)) {
-		pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES);
-		goto repeat;
-	}
-
 	ctrl_outl(vpn | PMB_V, mk_pmb_addr(pos));
 
 #ifdef CONFIG_CACHE_WRITETHROUGH
@@ -161,35 +128,21 @@ repeat:
 #endif
 
 	ctrl_outl(ppn | flags | PMB_V, mk_pmb_data(pos));
-
-	*entry = pos;
-
-	return 0;
 }
 
-int __uses_jump_to_uncached set_pmb_entry(struct pmb_entry *pmbe)
+static void __uses_jump_to_uncached set_pmb_entry(struct pmb_entry *pmbe)
 {
-	int ret;
-
 	jump_to_uncached();
-	ret = __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &pmbe->entry);
+	__set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, pmbe->entry);
 	back_to_cached();
-
-	return ret;
 }
 
-void __uses_jump_to_uncached clear_pmb_entry(struct pmb_entry *pmbe)
+static void __uses_jump_to_uncached clear_pmb_entry(struct pmb_entry *pmbe)
 {
 	unsigned int entry = pmbe->entry;
 	unsigned long addr;
 
-	/*
-	 * Don't allow clearing of wired init entries, P1 or P2 access
-	 * without a corresponding mapping in the PMB will lead to reset
-	 * by the TLB.
-	 */
-	if (unlikely(entry < ARRAY_SIZE(pmb_init_map) ||
-		     entry >= NR_PMB_ENTRIES))
+	if (unlikely(entry >= NR_PMB_ENTRIES))
 		return;
 
 	jump_to_uncached();
@@ -202,8 +155,6 @@ void __uses_jump_to_uncached clear_pmb_entry(struct pmb_entry *pmbe)
 	ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr);
 
 	back_to_cached();
-
-	clear_bit(entry, &pmb_map);
 }
 
 
@@ -239,23 +190,17 @@ long pmb_remap(unsigned long vaddr, unsigned long phys,
 
 again:
 	for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
-		int ret;
-
 		if (size < pmb_sizes[i].size)
 			continue;
 
-		pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag);
+		pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag,
+				 PMB_NO_ENTRY);
 		if (IS_ERR(pmbe)) {
 			err = PTR_ERR(pmbe);
 			goto out;
 		}
 
-		ret = set_pmb_entry(pmbe);
-		if (ret != 0) {
-			pmb_free(pmbe);
-			err = -EBUSY;
-			goto out;
-		}
+		set_pmb_entry(pmbe);
 
 		phys	+= pmb_sizes[i].size;
 		vaddr	+= pmb_sizes[i].size;
@@ -292,11 +237,16 @@ out:
 
 void pmb_unmap(unsigned long addr)
 {
-	struct pmb_entry **p, *pmbe;
+	struct pmb_entry *pmbe = NULL;
+	int i;
 
-	for (p = &pmb_list; (pmbe = *p); p = &pmbe->next)
-		if (pmbe->vpn == addr)
-			break;
+	for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+		if (test_bit(i, &pmb_map)) {
+			pmbe = &pmb_entry_list[i];
+			if (pmbe->vpn == addr)
+				break;
+		}
+	}
 
 	if (unlikely(!pmbe))
 		return;
@@ -306,13 +256,22 @@ void pmb_unmap(unsigned long addr)
 
 static void __pmb_unmap(struct pmb_entry *pmbe)
 {
-	WARN_ON(!test_bit(pmbe->entry, &pmb_map));
+	BUG_ON(!test_bit(pmbe->entry, &pmb_map));
 
 	do {
 		struct pmb_entry *pmblink = pmbe;
 
-		if (pmbe->entry != PMB_NO_ENTRY)
-			clear_pmb_entry(pmbe);
+		/*
+		 * We may be called before this pmb_entry has been
+		 * entered into the PMB table via set_pmb_entry(), but
+		 * that's OK because we've allocated a unique slot for
+		 * this entry in pmb_alloc() (even if we haven't filled
+		 * it yet).
+		 *
+		 * Therefore, calling clear_pmb_entry() is safe as no
+		 * other mapping can be using that slot.
+		 */
+		clear_pmb_entry(pmbe);
 
 		pmbe = pmblink->link;
 
@@ -320,42 +279,34 @@ static void __pmb_unmap(struct pmb_entry *pmbe)
 	} while (pmbe);
 }
 
-static void pmb_cache_ctor(void *pmb)
+#ifdef CONFIG_PMB
+int __uses_jump_to_uncached pmb_init(void)
 {
-	struct pmb_entry *pmbe = pmb;
-
-	memset(pmb, 0, sizeof(struct pmb_entry));
-
-	pmbe->entry = PMB_NO_ENTRY;
-}
-
-static int __uses_jump_to_uncached pmb_init(void)
-{
-	unsigned int nr_entries = ARRAY_SIZE(pmb_init_map);
-	unsigned int entry, i;
-
-	BUG_ON(unlikely(nr_entries >= NR_PMB_ENTRIES));
-
-	pmb_cache = kmem_cache_create("pmb", sizeof(struct pmb_entry), 0,
-				      SLAB_PANIC, pmb_cache_ctor);
+	unsigned int i;
+	long size, ret;
 
 	jump_to_uncached();
 
 	/*
-	 * Ordering is important, P2 must be mapped in the PMB before we
-	 * can set PMB.SE, and P1 must be mapped before we jump back to
-	 * P1 space.
+	 * Insert PMB entries for the P1 and P2 areas so that, after
+	 * we've switched the MMU to 32-bit mode, the semantics of P1
+	 * and P2 are the same as in 29-bit mode, e.g.
+	 *
+	 *	P1 - provides a cached window onto physical memory
+	 *	P2 - provides an uncached window onto physical memory
 	 */
-	for (entry = 0; entry < nr_entries; entry++) {
-		struct pmb_entry *pmbe = pmb_init_map + entry;
+	size = __MEMORY_START + __MEMORY_SIZE;
 
-		__set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &entry);
-	}
+	ret = pmb_remap(P1SEG, 0x00000000, size, PMB_C);
+	BUG_ON(ret != size);
+
+	ret = pmb_remap(P2SEG, 0x00000000, size, PMB_WT | PMB_UB);
+	BUG_ON(ret != size);
 
 	ctrl_outl(0, PMB_IRMCR);
 
 	/* PMB.SE and UB[7] */
-	ctrl_outl((1 << 31) | (1 << 7), PMB_PASCR);
+	ctrl_outl(PASCR_SE | (1 << 7), PMB_PASCR);
 
 	/* Flush out the TLB */
 	i =  ctrl_inl(MMUCR);
@@ -366,7 +317,53 @@ static int __uses_jump_to_uncached pmb_init(void)
 
 	return 0;
 }
-arch_initcall(pmb_init);
+#else
+int __uses_jump_to_uncached pmb_init(void)
+{
+	int i;
+	unsigned long addr, data;
+
+	jump_to_uncached();
+
+	for (i = 0; i < PMB_ENTRY_MAX; i++) {
+		struct pmb_entry *pmbe;
+		unsigned long vpn, ppn, flags;
+
+		addr = PMB_DATA + (i << PMB_E_SHIFT);
+		data = ctrl_inl(addr);
+		if (!(data & PMB_V))
+			continue;
+
+		if (data & PMB_C) {
+#if defined(CONFIG_CACHE_WRITETHROUGH)
+			data |= PMB_WT;
+#elif defined(CONFIG_CACHE_WRITEBACK)
+			data &= ~PMB_WT;
+#else
+			data &= ~(PMB_C | PMB_WT);
+#endif
+		}
+		ctrl_outl(data, addr);
+
+		ppn = data & PMB_PFN_MASK;
+
+		flags = data & (PMB_C | PMB_WT | PMB_UB);
+		flags |= data & PMB_SZ_MASK;
+
+		addr = PMB_ADDR + (i << PMB_E_SHIFT);
+		data = ctrl_inl(addr);
+
+		vpn = data & PMB_PFN_MASK;
+
+		pmbe = pmb_alloc(vpn, ppn, flags, i);
+		WARN_ON(IS_ERR(pmbe));
+	}
+
+	back_to_cached();
+
+	return 0;
+}
+#endif /* CONFIG_PMB */
 
 static int pmb_seq_show(struct seq_file *file, void *iter)
 {
@@ -434,15 +431,18 @@ postcore_initcall(pmb_debugfs_init);
 static int pmb_sysdev_suspend(struct sys_device *dev, pm_message_t state)
 {
 	static pm_message_t prev_state;
+	int i;
 
 	/* Restore the PMB after a resume from hibernation */
 	if (state.event == PM_EVENT_ON &&
 	    prev_state.event == PM_EVENT_FREEZE) {
 		struct pmb_entry *pmbe;
-		spin_lock_irq(&pmb_list_lock);
-		for (pmbe = pmb_list; pmbe; pmbe = pmbe->next)
-			set_pmb_entry(pmbe);
-		spin_unlock_irq(&pmb_list_lock);
+		for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+			if (test_bit(i, &pmb_map)) {
+				pmbe = &pmb_entry_list[i];
+				set_pmb_entry(pmbe);
+			}
+		}
 	}
 	prev_state = state;
 	return 0;
diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile
index 8e6eec91c14c..4886c5c1786c 100644
--- a/arch/sh/oprofile/Makefile
+++ b/arch/sh/oprofile/Makefile
@@ -7,7 +7,3 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
 		timer_int.o )
 
 oprofile-y	:= $(DRIVER_OBJS) common.o backtrace.o
-
-oprofile-$(CONFIG_CPU_SUBTYPE_SH7750S)	+= op_model_sh7750.o
-oprofile-$(CONFIG_CPU_SUBTYPE_SH7750)	+= op_model_sh7750.o
-oprofile-$(CONFIG_CPU_SUBTYPE_SH7091)	+= op_model_sh7750.o
diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c
index 44f4e31c6d63..ac604937f3ee 100644
--- a/arch/sh/oprofile/common.c
+++ b/arch/sh/oprofile/common.c
@@ -20,9 +20,6 @@
 #include <asm/processor.h>
 #include "op_impl.h"
 
-extern struct op_sh_model op_model_sh7750_ops __weak;
-extern struct op_sh_model op_model_sh4a_ops __weak;
-
 static struct op_sh_model *model;
 
 static struct op_counter_config ctr[20];
@@ -94,33 +91,14 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	 */
 	ops->backtrace = sh_backtrace;
 
-	switch (current_cpu_data.type) {
-	/* SH-4 types */
-	case CPU_SH7750:
-	case CPU_SH7750S:
-		lmodel = &op_model_sh7750_ops;
-		break;
-
-        /* SH-4A types */
-	case CPU_SH7763:
-	case CPU_SH7770:
-	case CPU_SH7780:
-	case CPU_SH7781:
-	case CPU_SH7785:
-	case CPU_SH7786:
-	case CPU_SH7723:
-	case CPU_SH7724:
-	case CPU_SHX3:
-		lmodel = &op_model_sh4a_ops;
-		break;
-
-	/* SH4AL-DSP types */
-	case CPU_SH7343:
-	case CPU_SH7722:
-	case CPU_SH7366:
-		lmodel = &op_model_sh4a_ops;
-		break;
-	}
+	/*
+	 * XXX
+	 *
+	 * All of the SH7750/SH-4A counters have been converted to perf,
+	 * this infrastructure hook is left for other users until they've
+	 * had a chance to convert over, at which point all of this
+	 * will be deleted.
+	 */
 
 	if (!lmodel)
 		return -ENODEV;
diff --git a/arch/sh/oprofile/op_impl.h b/arch/sh/oprofile/op_impl.h
index 4d509975eba6..1244479ceb29 100644
--- a/arch/sh/oprofile/op_impl.h
+++ b/arch/sh/oprofile/op_impl.h
@@ -6,7 +6,7 @@ struct op_counter_config {
 	unsigned long enabled;
 	unsigned long event;
 
-	unsigned long long count;
+	unsigned long count;
 
 	/* Dummy values for userspace tool compliance */
 	unsigned long kernel;
diff --git a/arch/sh/oprofile/op_model_sh7750.c b/arch/sh/oprofile/op_model_sh7750.c
deleted file mode 100644
index c892c7c30c2f..000000000000
--- a/arch/sh/oprofile/op_model_sh7750.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * arch/sh/oprofile/op_model_sh7750.c
- *
- * OProfile support for SH7750/SH7750S Performance Counters
- *
- * Copyright (C) 2003 - 2008  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/oprofile.h>
-#include <linux/profile.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/fs.h>
-#include "op_impl.h"
-
-#define PM_CR_BASE	0xff000084	/* 16-bit */
-#define PM_CTR_BASE	0xff100004	/* 32-bit */
-
-#define PMCR(n)		(PM_CR_BASE + ((n) * 0x04))
-#define PMCTRH(n)	(PM_CTR_BASE + 0x00 + ((n) * 0x08))
-#define PMCTRL(n)	(PM_CTR_BASE + 0x04 + ((n) * 0x08))
-
-#define PMCR_PMM_MASK	0x0000003f
-
-#define PMCR_CLKF	0x00000100
-#define PMCR_PMCLR	0x00002000
-#define PMCR_PMST	0x00004000
-#define PMCR_PMEN	0x00008000
-
-struct op_sh_model op_model_sh7750_ops;
-
-#define NR_CNTRS	2
-
-static struct sh7750_ppc_register_config {
-	unsigned int ctrl;
-	unsigned long cnt_hi;
-	unsigned long cnt_lo;
-} regcache[NR_CNTRS];
-
-/*
- * There are a number of events supported by each counter (33 in total).
- * Since we have 2 counters, each counter will take the event code as it
- * corresponds to the PMCR PMM setting. Each counter can be configured
- * independently.
- *
- *	Event Code	Description
- *	----------	-----------
- *
- *	0x01		Operand read access
- *	0x02		Operand write access
- *	0x03		UTLB miss
- *	0x04		Operand cache read miss
- *	0x05		Operand cache write miss
- *	0x06		Instruction fetch (w/ cache)
- *	0x07		Instruction TLB miss
- *	0x08		Instruction cache miss
- *	0x09		All operand accesses
- *	0x0a		All instruction accesses
- *	0x0b		OC RAM operand access
- *	0x0d		On-chip I/O space access
- *	0x0e		Operand access (r/w)
- *	0x0f		Operand cache miss (r/w)
- *	0x10		Branch instruction
- *	0x11		Branch taken
- *	0x12		BSR/BSRF/JSR
- *	0x13		Instruction execution
- *	0x14		Instruction execution in parallel
- *	0x15		FPU Instruction execution
- *	0x16		Interrupt
- *	0x17		NMI
- *	0x18		trapa instruction execution
- *	0x19		UBCA match
- *	0x1a		UBCB match
- *	0x21		Instruction cache fill
- *	0x22		Operand cache fill
- *	0x23		Elapsed time
- *	0x24		Pipeline freeze by I-cache miss
- *	0x25		Pipeline freeze by D-cache miss
- *	0x27		Pipeline freeze by branch instruction
- *	0x28		Pipeline freeze by CPU register
- *	0x29		Pipeline freeze by FPU
- *
- * Unfortunately we don't have a native exception or interrupt for counter
- * overflow (although since these counters can run for 16.3 days without
- * overflowing, it's not really necessary).
- *
- * OProfile on the other hand likes to have samples taken periodically, so
- * for now we just piggyback the timer interrupt to get the expected
- * behavior.
- */
-
-static int sh7750_timer_notify(struct pt_regs *regs)
-{
-	oprofile_add_sample(regs, 0);
-	return 0;
-}
-
-static u64 sh7750_read_counter(int counter)
-{
-	return (u64)((u64)(__raw_readl(PMCTRH(counter)) & 0xffff) << 32) |
-			   __raw_readl(PMCTRL(counter));
-}
-
-/*
- * Files will be in a path like:
- *
- *  /<oprofilefs mount point>/<counter number>/<file>
- *
- * So when dealing with <file>, we look to the parent dentry for the counter
- * number.
- */
-static inline int to_counter(struct file *file)
-{
-	const unsigned char *name = file->f_path.dentry->d_parent->d_name.name;
-
-	return (int)simple_strtol(name, NULL, 10);
-}
-
-/*
- * XXX: We have 48-bit counters, so we're probably going to want something
- * more along the lines of oprofilefs_ullong_to_user().. Truncating to
- * unsigned long works fine for now though, as long as we don't attempt to
- * profile for too horribly long.
- */
-static ssize_t sh7750_read_count(struct file *file, char __user *buf,
-				 size_t count, loff_t *ppos)
-{
-	int counter = to_counter(file);
-	u64 val = sh7750_read_counter(counter);
-
-	return oprofilefs_ulong_to_user((unsigned long)val, buf, count, ppos);
-}
-
-static ssize_t sh7750_write_count(struct file *file, const char __user *buf,
-				  size_t count, loff_t *ppos)
-{
-	int counter = to_counter(file);
-	unsigned long val;
-
-	if (oprofilefs_ulong_from_user(&val, buf, count))
-		return -EFAULT;
-
-	/*
-	 * Any write will clear the counter, although only 0 should be
-	 * written for this purpose, as we do not support setting the
-	 * counter to an arbitrary value.
-	 */
-	WARN_ON(val != 0);
-
-	__raw_writew(__raw_readw(PMCR(counter)) | PMCR_PMCLR, PMCR(counter));
-
-	return count;
-}
-
-static const struct file_operations count_fops = {
-	.read		= sh7750_read_count,
-	.write		= sh7750_write_count,
-};
-
-static int sh7750_ppc_create_files(struct super_block *sb, struct dentry *dir)
-{
-	return oprofilefs_create_file(sb, dir, "count", &count_fops);
-}
-
-static void sh7750_ppc_reg_setup(struct op_counter_config *ctr)
-{
-	unsigned int counters = op_model_sh7750_ops.num_counters;
-	int i;
-
-	for (i = 0; i < counters; i++) {
-		regcache[i].ctrl	= 0;
-		regcache[i].cnt_hi	= 0;
-		regcache[i].cnt_lo	= 0;
-
-		if (!ctr[i].enabled)
-			continue;
-
-		regcache[i].ctrl |= ctr[i].event | PMCR_PMEN | PMCR_PMST;
-		regcache[i].cnt_hi = (unsigned long)((ctr->count >> 32) & 0xffff);
-		regcache[i].cnt_lo = (unsigned long)(ctr->count & 0xffffffff);
-	}
-}
-
-static void sh7750_ppc_cpu_setup(void *args)
-{
-	unsigned int counters = op_model_sh7750_ops.num_counters;
-	int i;
-
-	for (i = 0; i < counters; i++) {
-		__raw_writew(0, PMCR(i));
-		__raw_writel(regcache[i].cnt_hi, PMCTRH(i));
-		__raw_writel(regcache[i].cnt_lo, PMCTRL(i));
-	}
-}
-
-static void sh7750_ppc_cpu_start(void *args)
-{
-	unsigned int counters = op_model_sh7750_ops.num_counters;
-	int i;
-
-	for (i = 0; i < counters; i++)
-		__raw_writew(regcache[i].ctrl, PMCR(i));
-}
-
-static void sh7750_ppc_cpu_stop(void *args)
-{
-	unsigned int counters = op_model_sh7750_ops.num_counters;
-	int i;
-
-	/* Disable the counters */
-	for (i = 0; i < counters; i++)
-		__raw_writew(__raw_readw(PMCR(i)) & ~PMCR_PMEN, PMCR(i));
-}
-
-static inline void sh7750_ppc_reset(void)
-{
-	unsigned int counters = op_model_sh7750_ops.num_counters;
-	int i;
-
-	/* Clear the counters */
-	for (i = 0; i < counters; i++)
-		__raw_writew(__raw_readw(PMCR(i)) | PMCR_PMCLR, PMCR(i));
-}
-
-static int sh7750_ppc_init(void)
-{
-	sh7750_ppc_reset();
-
-	return register_timer_hook(sh7750_timer_notify);
-}
-
-static void sh7750_ppc_exit(void)
-{
-	unregister_timer_hook(sh7750_timer_notify);
-
-	sh7750_ppc_reset();
-}
-
-struct op_sh_model op_model_sh7750_ops = {
-	.cpu_type	= "sh/sh7750",
-	.num_counters	= NR_CNTRS,
-	.reg_setup	= sh7750_ppc_reg_setup,
-	.cpu_setup	= sh7750_ppc_cpu_setup,
-	.cpu_start	= sh7750_ppc_cpu_start,
-	.cpu_stop	= sh7750_ppc_cpu_stop,
-	.init		= sh7750_ppc_init,
-	.exit		= sh7750_ppc_exit,
-	.create_files	= sh7750_ppc_create_files,
-};
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 05ef5380a687..33ac1a9ac881 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -221,6 +221,13 @@ config SPARC64_SMP
 	default y
 	depends on SPARC64 && SMP
 
+config EARLYFB
+	bool "Support for early boot text console"
+	default y
+	depends on SPARC64
+	help
+	  Say Y here to enable a faster early framebuffer boot console.
+
 choice
 	prompt "Kernel page size" if SPARC64
 	default SPARC64_PAGE_SIZE_8KB
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index dfe272d14465..113225b241e0 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -27,6 +27,7 @@ AS             := $(AS) -32
 LDFLAGS        := -m elf32_sparc
 CHECKFLAGS     += -D__sparc__
 export BITS    := 32
+UTS_MACHINE    := sparc
 
 #KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7
 KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
@@ -46,6 +47,7 @@ CHECKFLAGS      += -D__sparc__ -D__sparc_v9__ -D__arch64__ -m64
 
 LDFLAGS              := -m elf64_sparc
 export BITS          := 64
+UTS_MACHINE          := sparc64
 
 KBUILD_CFLAGS += -m64 -pipe -mno-fpu -mcpu=ultrasparc -mcmodel=medlow   \
                  -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wno-sign-compare \
diff --git a/arch/sparc/include/asm/btext.h b/arch/sparc/include/asm/btext.h
new file mode 100644
index 000000000000..9b2bc6b6ed0a
--- /dev/null
+++ b/arch/sparc/include/asm/btext.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_BTEXT_H
+#define _SPARC_BTEXT_H
+
+extern int btext_find_display(void);
+
+#endif /* _SPARC_BTEXT_H */
diff --git a/arch/sparc/include/asm/cacheflush_32.h b/arch/sparc/include/asm/cacheflush_32.h
index 68ac10910271..2e468773f250 100644
--- a/arch/sparc/include/asm/cacheflush_32.h
+++ b/arch/sparc/include/asm/cacheflush_32.h
@@ -75,6 +75,7 @@ BTFIXUPDEF_CALL(void, flush_sig_insns, struct mm_struct *, unsigned long)
 
 extern void sparc_flush_page_to_ram(struct page *page);
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 #define flush_dcache_page(page)			sparc_flush_page_to_ram(page)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/sparc/include/asm/cacheflush_64.h b/arch/sparc/include/asm/cacheflush_64.h
index c43321729b3b..b95384033e89 100644
--- a/arch/sparc/include/asm/cacheflush_64.h
+++ b/arch/sparc/include/asm/cacheflush_64.h
@@ -37,6 +37,7 @@ extern void flush_dcache_page_all(struct mm_struct *mm, struct page *page);
 #endif
 
 extern void __flush_dcache_range(unsigned long start, unsigned long end);
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *page);
 
 #define flush_icache_page(vma, pg)	do { } while(0)
diff --git a/arch/sparc/include/asm/fcntl.h b/arch/sparc/include/asm/fcntl.h
index d4d9c9d852c3..3b9cfb39175e 100644
--- a/arch/sparc/include/asm/fcntl.h
+++ b/arch/sparc/include/asm/fcntl.h
@@ -1,14 +1,12 @@
 #ifndef _SPARC_FCNTL_H
 #define _SPARC_FCNTL_H
 
-/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
-   located on an ext2 file system */
 #define O_APPEND	0x0008
 #define FASYNC		0x0040	/* fcntl, for BSD compatibility */
 #define O_CREAT		0x0200	/* not fcntl */
 #define O_TRUNC		0x0400	/* not fcntl */
 #define O_EXCL		0x0800	/* not fcntl */
-#define O_SYNC		0x2000
+#define O_DSYNC		0x2000	/* used to be O_SYNC, see below */
 #define O_NONBLOCK	0x4000
 #if defined(__sparc__) && defined(__arch64__)
 #define O_NDELAY	0x0004
@@ -20,6 +18,21 @@
 #define O_DIRECT        0x100000 /* direct disk access hint */
 #define O_NOATIME	0x200000
 #define O_CLOEXEC	0x400000
+/*
+ * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using
+ * the O_SYNC flag.  We continue to use the existing numerical value
+ * for O_DSYNC semantics now, but using the correct symbolic name for it.
+ * This new value is used to request true Posix O_SYNC semantics.  It is
+ * defined in this strange way to make sure applications compiled against
+ * new headers get at least O_DSYNC semantics on older kernels.
+ *
+ * This has the nice side-effect that we can simply test for O_DSYNC
+ * wherever we do not care if O_DSYNC or O_SYNC is used.
+ *
+ * Note: __O_SYNC must never be used directly.
+ */
+#define __O_SYNC	0x800000
+#define O_SYNC		(__O_SYNC|O_DSYNC)
 
 #define F_GETOWN	5	/*  for sockets. */
 #define F_SETOWN	6	/*  for sockets. */
diff --git a/arch/sparc/include/asm/leon.h b/arch/sparc/include/asm/leon.h
index 28a42b73f64f..3ea5964c43b4 100644
--- a/arch/sparc/include/asm/leon.h
+++ b/arch/sparc/include/asm/leon.h
@@ -148,7 +148,7 @@ static inline unsigned long leon_load_reg(unsigned long paddr)
 	return retval;
 }
 
-extern inline void leon_srmmu_disabletlb(void)
+static inline void leon_srmmu_disabletlb(void)
 {
 	unsigned int retval;
 	__asm__ __volatile__("lda [%%g0] %2, %0\n\t" : "=r"(retval) : "r"(0),
@@ -158,7 +158,7 @@ extern inline void leon_srmmu_disabletlb(void)
 			     "i"(ASI_LEON_MMUREGS) : "memory");
 }
 
-extern inline void leon_srmmu_enabletlb(void)
+static inline void leon_srmmu_enabletlb(void)
 {
 	unsigned int retval;
 	__asm__ __volatile__("lda [%%g0] %2, %0\n\t" : "=r"(retval) : "r"(0),
@@ -190,7 +190,7 @@ extern void leon_init_IRQ(void);
 
 extern unsigned long last_valid_pfn;
 
-extern inline unsigned long sparc_leon3_get_dcachecfg(void)
+static inline unsigned long sparc_leon3_get_dcachecfg(void)
 {
 	unsigned int retval;
 	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
@@ -201,7 +201,7 @@ extern inline unsigned long sparc_leon3_get_dcachecfg(void)
 }
 
 /* enable snooping */
-extern inline void sparc_leon3_enable_snooping(void)
+static inline void sparc_leon3_enable_snooping(void)
 {
 	__asm__ __volatile__ ("lda [%%g0] 2, %%l1\n\t"
 			  "set 0x800000, %%l2\n\t"
@@ -209,7 +209,14 @@ extern inline void sparc_leon3_enable_snooping(void)
 			  "sta %%l2, [%%g0] 2\n\t" : : : "l1", "l2");
 };
 
-extern inline void sparc_leon3_disable_cache(void)
+static inline int sparc_leon3_snooping_enabled(void)
+{
+	u32 cctrl;
+	__asm__ __volatile__("lda [%%g0] 2, %0\n\t" : "=r"(cctrl));
+        return (cctrl >> 23) & 1;
+};
+
+static inline void sparc_leon3_disable_cache(void)
 {
 	__asm__ __volatile__ ("lda [%%g0] 2, %%l1\n\t"
 			  "set 0x00000f, %%l2\n\t"
@@ -340,6 +347,30 @@ extern int leon_flush_needed(void);
 extern void leon_switch_mm(void);
 extern int srmmu_swprobe_trace;
 
+#ifdef CONFIG_SMP
+extern int leon_smp_nrcpus(void);
+extern void leon_clear_profile_irq(int cpu);
+extern void leon_smp_done(void);
+extern void leon_boot_cpus(void);
+extern int leon_boot_one_cpu(int i);
+void leon_init_smp(void);
+extern void cpu_probe(void);
+extern void cpu_idle(void);
+extern void init_IRQ(void);
+extern void cpu_panic(void);
+extern int __leon_processor_id(void);
+void leon_enable_irq_cpu(unsigned int irq_nr, unsigned int cpu);
+
+extern unsigned int real_irq_entry[], smpleon_ticker[];
+extern unsigned int patchme_maybe_smp_msg[];
+extern unsigned long trapbase_cpu1[];
+extern unsigned long trapbase_cpu2[];
+extern unsigned long trapbase_cpu3[];
+extern unsigned int t_nmi[], linux_trap_ipi15_leon[];
+extern unsigned int linux_trap_ipi15_sun4m[];
+
+#endif /* CONFIG_SMP */
+
 #endif /* __KERNEL__ */
 
 #endif /* __ASSEMBLY__ */
@@ -356,6 +387,10 @@ extern int srmmu_swprobe_trace;
 #define leon_switch_mm() do {} while (0)
 #define leon_init_IRQ() do {} while (0)
 #define init_leon() do {} while (0)
+#define leon_smp_done() do {} while (0)
+#define leon_boot_cpus() do {} while (0)
+#define leon_boot_one_cpu(i) 1
+#define leon_init_smp() do {} while (0)
 
 #endif /* !defined(CONFIG_SPARC_LEON) */
 
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
index b63e51c3c3ee..b0576df6ec83 100644
--- a/arch/sparc/include/asm/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -16,8 +16,6 @@
 
 #define PCI_IRQ_NONE		0xffffffff
 
-#define PCI_CACHE_LINE_BYTES	64
-
 static inline void pcibios_set_master(struct pci_dev *dev)
 {
 	/* No special bus mastering setup handling */
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index 82a190d7efc1..f845828ca4c6 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -1,3 +1,4 @@
+#include <linux/of.h>	/* linux/of.h gets to determine #include ordering */
 #ifndef _SPARC_PROM_H
 #define _SPARC_PROM_H
 #ifdef __KERNEL__
@@ -28,50 +29,11 @@
 #define of_prop_cmp(s1, s2)		strcasecmp((s1), (s2))
 #define of_node_cmp(s1, s2)		strcmp((s1), (s2))
 
-typedef u32 phandle;
-typedef u32 ihandle;
-
-struct property {
-	char	*name;
-	int	length;
-	void	*value;
-	struct property *next;
-	unsigned long _flags;
-	unsigned int unique_id;
-};
-
-struct of_irq_controller;
-struct device_node {
-	const char	*name;
-	const char	*type;
-	phandle	node;
-	char	*path_component_name;
-	char	*full_name;
-
-	struct	property *properties;
-	struct  property *deadprops; /* removed properties */
-	struct	device_node *parent;
-	struct	device_node *child;
-	struct	device_node *sibling;
-	struct	device_node *next;	/* next device of same type */
-	struct	device_node *allnext;	/* next in list of all nodes */
-	struct  proc_dir_entry *pde;	/* this node's proc directory */
-	struct  kref kref;
-	unsigned long _flags;
-	void	*data;
-	unsigned int unique_id;
-
-	struct of_irq_controller *irq_trans;
-};
-
 struct of_irq_controller {
 	unsigned int	(*irq_build)(struct device_node *, unsigned int, void *);
 	void		*data;
 };
 
-#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
-#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
-
 extern struct device_node *of_find_node_by_cpuid(int cpuid);
 extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
 extern struct mutex of_set_property_mutex;
@@ -89,15 +51,6 @@ extern void prom_build_devicetree(void);
 extern void of_populate_present_mask(void);
 extern void of_fill_in_cpu_data(void);
 
-/* Dummy ref counting routines - to be implemented later */
-static inline struct device_node *of_node_get(struct device_node *node)
-{
-	return node;
-}
-static inline void of_node_put(struct device_node *node)
-{
-}
-
 /* These routines are here to provide compatibility with how powerpc
  * handles IRQ mapping for OF device nodes.  We precompute and permanently
  * register them in the of_device objects, whereas powerpc computes them
@@ -108,12 +61,6 @@ static inline void irq_dispose_mapping(unsigned int virq)
 {
 }
 
-/*
- * NB:  This is here while we transition from using asm/prom.h
- * to linux/of.h
- */
-#include <linux/of.h>
-
 extern struct device_node *of_console_device;
 extern char *of_console_path;
 extern char *of_console_options;
diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h
index 1dc129ac2feb..6e5621006f85 100644
--- a/arch/sparc/include/asm/rwsem.h
+++ b/arch/sparc/include/asm/rwsem.h
@@ -35,8 +35,8 @@ struct rw_semaphore {
 #endif
 
 #define __RWSEM_INITIALIZER(name) \
-{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \
-  __RWSEM_DEP_MAP_INIT(name) }
+{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
+  LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
 
 #define DECLARE_RWSEM(name) \
 	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
diff --git a/arch/sparc/include/asm/smp_32.h b/arch/sparc/include/asm/smp_32.h
index 58101dc70493..841905c10215 100644
--- a/arch/sparc/include/asm/smp_32.h
+++ b/arch/sparc/include/asm/smp_32.h
@@ -106,6 +106,15 @@ static inline int hard_smp4d_processor_id(void)
 	return cpuid;
 }
 
+extern inline int hard_smpleon_processor_id(void)
+{
+	int cpuid;
+	__asm__ __volatile__("rd     %%asr17,%0\n\t"
+			     "srl    %0,28,%0" :
+			     "=&r" (cpuid) : );
+	return cpuid;
+}
+
 #ifndef MODULE
 static inline int hard_smp_processor_id(void)
 {
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
index 3a5ae3d12088..9d3fefcff2f5 100644
--- a/arch/sparc/include/asm/socket.h
+++ b/arch/sparc/include/asm/socket.h
@@ -56,6 +56,8 @@
 #define SO_TIMESTAMPING		0x0023
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             0x0024
+
 /* Security levels - as per NRL IPv6 - don't actually do anything */
 #define SO_SECURITY_AUTHENTICATION		0x5001
 #define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index 42f2316c3eaa..d8d25bd97121 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -396,8 +396,9 @@
 #define __NR_pwritev		325
 #define __NR_rt_tgsigqueueinfo	326
 #define __NR_perf_event_open	327
+#define __NR_recvmmsg		328
 
-#define NR_SYSCALLS		328
+#define NR_SYSCALLS		329
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 5b47fab9966e..c6316142db4e 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -72,7 +72,7 @@ obj-y                     += dma.o
 obj-$(CONFIG_SPARC32_PCI) += pcic.o
 
 obj-$(CONFIG_SMP)         += trampoline_$(BITS).o smp_$(BITS).o
-obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o
+obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o leon_smp.o
 obj-$(CONFIG_SPARC64_SMP) += hvtramp.o
 
 obj-y                     += auxio_$(BITS).o
@@ -87,6 +87,7 @@ obj-$(CONFIG_KGDB)        += kgdb_$(BITS).o
 obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
 CFLAGS_REMOVE_ftrace.o := -pg
 
+obj-$(CONFIG_EARLYFB) += btext.o
 obj-$(CONFIG_STACKTRACE)     += stacktrace.o
 # sparc64 PCI
 obj-$(CONFIG_SPARC64_PCI)    += pci.o pci_common.o psycho_common.o
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index 9c115823c4b5..71ec90b9e316 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -10,7 +10,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
 #include <linux/pm.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -76,7 +75,6 @@ static inline void apc_free(struct of_device *op)
 
 static int apc_open(struct inode *inode, struct file *f)
 {
-	cycle_kernel_lock();
 	return 0;
 }
 
@@ -87,61 +85,46 @@ static int apc_release(struct inode *inode, struct file *f)
 
 static long apc_ioctl(struct file *f, unsigned int cmd, unsigned long __arg)
 {
-	__u8 inarg, __user *arg;
-
-	arg = (__u8 __user *) __arg;
-
-	lock_kernel();
+	__u8 inarg, __user *arg = (__u8 __user *) __arg;
 
 	switch (cmd) {
 	case APCIOCGFANCTL:
-		if (put_user(apc_readb(APC_FANCTL_REG) & APC_REGMASK, arg)) {
-			unlock_kernel();
+		if (put_user(apc_readb(APC_FANCTL_REG) & APC_REGMASK, arg))
 			return -EFAULT;
-		}
 		break;
 
 	case APCIOCGCPWR:
-		if (put_user(apc_readb(APC_CPOWER_REG) & APC_REGMASK, arg)) {
-			unlock_kernel();
+		if (put_user(apc_readb(APC_CPOWER_REG) & APC_REGMASK, arg))
 			return -EFAULT;
-		}
 		break;
 
 	case APCIOCGBPORT:
-		if (put_user(apc_readb(APC_BPORT_REG) & APC_BPMASK, arg)) {
-			unlock_kernel();
+		if (put_user(apc_readb(APC_BPORT_REG) & APC_BPMASK, arg))
 			return -EFAULT;
-		}
 		break;
 
 	case APCIOCSFANCTL:
-		if (get_user(inarg, arg)) {
-			unlock_kernel();
+		if (get_user(inarg, arg))
 			return -EFAULT;
-		}
 		apc_writeb(inarg & APC_REGMASK, APC_FANCTL_REG);
 		break;
+
 	case APCIOCSCPWR:
-		if (get_user(inarg, arg)) {
-			unlock_kernel();
+		if (get_user(inarg, arg))
 			return -EFAULT;
-		}
 		apc_writeb(inarg & APC_REGMASK, APC_CPOWER_REG);
 		break;
+
 	case APCIOCSBPORT:
-		if (get_user(inarg, arg)) {
-			unlock_kernel();
+		if (get_user(inarg, arg))
 			return -EFAULT;
-		}
 		apc_writeb(inarg & APC_BPMASK, APC_BPORT_REG);
 		break;
+
 	default:
-		unlock_kernel();
 		return -EINVAL;
 	};
 
-	unlock_kernel();
 	return 0;
 }
 
diff --git a/arch/sparc/kernel/auxio_32.c b/arch/sparc/kernel/auxio_32.c
index 45c41232fc4c..ee8d214cae1e 100644
--- a/arch/sparc/kernel/auxio_32.c
+++ b/arch/sparc/kernel/auxio_32.c
@@ -28,6 +28,7 @@ void __init auxio_probe(void)
 	struct resource r;
 
 	switch (sparc_cpu_model) {
+	case sparc_leon:
 	case sun4d:
 	case sun4:
 		return;
diff --git a/arch/sparc/kernel/btext.c b/arch/sparc/kernel/btext.c
new file mode 100644
index 000000000000..8cc2d56ffe9a
--- /dev/null
+++ b/arch/sparc/kernel/btext.c
@@ -0,0 +1,673 @@
+/*
+ * Procedures for drawing on the screen early on in the boot process.
+ *
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/console.h>
+
+#include <asm/btext.h>
+#include <asm/oplib.h>
+#include <asm/io.h>
+
+#define NO_SCROLL
+
+#ifndef NO_SCROLL
+static void scrollscreen(void);
+#endif
+
+static void draw_byte(unsigned char c, long locX, long locY);
+static void draw_byte_32(unsigned char *bits, unsigned int *base, int rb);
+static void draw_byte_16(unsigned char *bits, unsigned int *base, int rb);
+static void draw_byte_8(unsigned char *bits, unsigned int *base, int rb);
+
+#define __force_data __attribute__((__section__(".data")))
+
+static int g_loc_X __force_data;
+static int g_loc_Y __force_data;
+static int g_max_loc_X __force_data;
+static int g_max_loc_Y __force_data;
+
+static int dispDeviceRowBytes __force_data;
+static int dispDeviceDepth  __force_data;
+static int dispDeviceRect[4] __force_data;
+static unsigned char *dispDeviceBase __force_data;
+
+#define cmapsz	(16*256)
+
+static unsigned char vga_font[cmapsz];
+
+static int __init btext_initialize(unsigned int node)
+{
+	unsigned int width, height, depth, pitch;
+	unsigned long address = 0;
+	u32 prop;
+
+	if (prom_getproperty(node, "width", (char *)&width, 4) < 0)
+		return -EINVAL;
+	if (prom_getproperty(node, "height", (char *)&height, 4) < 0)
+		return -EINVAL;
+	if (prom_getproperty(node, "depth", (char *)&depth, 4) < 0)
+		return -EINVAL;
+	pitch = width * ((depth + 7) / 8);
+
+	if (prom_getproperty(node, "linebytes", (char *)&prop, 4) >= 0 &&
+	    prop != 0xffffffffu)
+		pitch = prop;
+
+	if (pitch == 1)
+		pitch = 0x1000;
+
+	if (prom_getproperty(node, "address", (char *)&prop, 4) >= 0)
+		address = prop;
+
+	/* FIXME: Add support for PCI reg properties. Right now, only
+	 * reliable on macs
+	 */
+	if (address == 0)
+		return -EINVAL;
+
+	g_loc_X = 0;
+	g_loc_Y = 0;
+	g_max_loc_X = width / 8;
+	g_max_loc_Y = height / 16;
+	dispDeviceBase = (unsigned char *)address;
+	dispDeviceRowBytes = pitch;
+	dispDeviceDepth = depth == 15 ? 16 : depth;
+	dispDeviceRect[0] = dispDeviceRect[1] = 0;
+	dispDeviceRect[2] = width;
+	dispDeviceRect[3] = height;
+
+	return 0;
+}
+
+/* Calc the base address of a given point (x,y) */
+static unsigned char * calc_base(int x, int y)
+{
+	unsigned char *base = dispDeviceBase;
+
+	base += (x + dispDeviceRect[0]) * (dispDeviceDepth >> 3);
+	base += (y + dispDeviceRect[1]) * dispDeviceRowBytes;
+	return base;
+}
+
+static void btext_clearscreen(void)
+{
+	unsigned int *base	= (unsigned int *)calc_base(0, 0);
+	unsigned long width 	= ((dispDeviceRect[2] - dispDeviceRect[0]) *
+					(dispDeviceDepth >> 3)) >> 2;
+	int i,j;
+
+	for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1]); i++)
+	{
+		unsigned int *ptr = base;
+		for(j=width; j; --j)
+			*(ptr++) = 0;
+		base += (dispDeviceRowBytes >> 2);
+	}
+}
+
+#ifndef NO_SCROLL
+static void scrollscreen(void)
+{
+	unsigned int *src     	= (unsigned int *)calc_base(0,16);
+	unsigned int *dst     	= (unsigned int *)calc_base(0,0);
+	unsigned long width    	= ((dispDeviceRect[2] - dispDeviceRect[0]) *
+				   (dispDeviceDepth >> 3)) >> 2;
+	int i,j;
+
+	for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1] - 16); i++)
+	{
+		unsigned int *src_ptr = src;
+		unsigned int *dst_ptr = dst;
+		for(j=width; j; --j)
+			*(dst_ptr++) = *(src_ptr++);
+		src += (dispDeviceRowBytes >> 2);
+		dst += (dispDeviceRowBytes >> 2);
+	}
+	for (i=0; i<16; i++)
+	{
+		unsigned int *dst_ptr = dst;
+		for(j=width; j; --j)
+			*(dst_ptr++) = 0;
+		dst += (dispDeviceRowBytes >> 2);
+	}
+}
+#endif /* ndef NO_SCROLL */
+
+void btext_drawchar(char c)
+{
+	int cline = 0;
+#ifdef NO_SCROLL
+	int x;
+#endif
+	switch (c) {
+	case '\b':
+		if (g_loc_X > 0)
+			--g_loc_X;
+		break;
+	case '\t':
+		g_loc_X = (g_loc_X & -8) + 8;
+		break;
+	case '\r':
+		g_loc_X = 0;
+		break;
+	case '\n':
+		g_loc_X = 0;
+		g_loc_Y++;
+		cline = 1;
+		break;
+	default:
+		draw_byte(c, g_loc_X++, g_loc_Y);
+	}
+	if (g_loc_X >= g_max_loc_X) {
+		g_loc_X = 0;
+		g_loc_Y++;
+		cline = 1;
+	}
+#ifndef NO_SCROLL
+	while (g_loc_Y >= g_max_loc_Y) {
+		scrollscreen();
+		g_loc_Y--;
+	}
+#else
+	/* wrap around from bottom to top of screen so we don't
+	   waste time scrolling each line.  -- paulus. */
+	if (g_loc_Y >= g_max_loc_Y)
+		g_loc_Y = 0;
+	if (cline) {
+		for (x = 0; x < g_max_loc_X; ++x)
+			draw_byte(' ', x, g_loc_Y);
+	}
+#endif
+}
+
+static void btext_drawtext(const char *c, unsigned int len)
+{
+	while (len--)
+		btext_drawchar(*c++);
+}
+
+static void draw_byte(unsigned char c, long locX, long locY)
+{
+	unsigned char *base	= calc_base(locX << 3, locY << 4);
+	unsigned char *font	= &vga_font[((unsigned int)c) * 16];
+	int rb			= dispDeviceRowBytes;
+
+	switch(dispDeviceDepth) {
+	case 24:
+	case 32:
+		draw_byte_32(font, (unsigned int *)base, rb);
+		break;
+	case 15:
+	case 16:
+		draw_byte_16(font, (unsigned int *)base, rb);
+		break;
+	case 8:
+		draw_byte_8(font, (unsigned int *)base, rb);
+		break;
+	}
+}
+
+static unsigned int expand_bits_8[16] = {
+	0x00000000,
+	0x000000ff,
+	0x0000ff00,
+	0x0000ffff,
+	0x00ff0000,
+	0x00ff00ff,
+	0x00ffff00,
+	0x00ffffff,
+	0xff000000,
+	0xff0000ff,
+	0xff00ff00,
+	0xff00ffff,
+	0xffff0000,
+	0xffff00ff,
+	0xffffff00,
+	0xffffffff
+};
+
+static unsigned int expand_bits_16[4] = {
+	0x00000000,
+	0x0000ffff,
+	0xffff0000,
+	0xffffffff
+};
+
+
+static void draw_byte_32(unsigned char *font, unsigned int *base, int rb)
+{
+	int l, bits;
+	int fg = 0xFFFFFFFFUL;
+	int bg = 0x00000000UL;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (-(bits >> 7) & fg) ^ bg;
+		base[1] = (-((bits >> 6) & 1) & fg) ^ bg;
+		base[2] = (-((bits >> 5) & 1) & fg) ^ bg;
+		base[3] = (-((bits >> 4) & 1) & fg) ^ bg;
+		base[4] = (-((bits >> 3) & 1) & fg) ^ bg;
+		base[5] = (-((bits >> 2) & 1) & fg) ^ bg;
+		base[6] = (-((bits >> 1) & 1) & fg) ^ bg;
+		base[7] = (-(bits & 1) & fg) ^ bg;
+		base = (unsigned int *) ((char *)base + rb);
+	}
+}
+
+static void draw_byte_16(unsigned char *font, unsigned int *base, int rb)
+{
+	int l, bits;
+	int fg = 0xFFFFFFFFUL;
+	int bg = 0x00000000UL;
+	unsigned int *eb = (int *)expand_bits_16;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (eb[bits >> 6] & fg) ^ bg;
+		base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg;
+		base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg;
+		base[3] = (eb[bits & 3] & fg) ^ bg;
+		base = (unsigned int *) ((char *)base + rb);
+	}
+}
+
+static void draw_byte_8(unsigned char *font, unsigned int *base, int rb)
+{
+	int l, bits;
+	int fg = 0x0F0F0F0FUL;
+	int bg = 0x00000000UL;
+	unsigned int *eb = (int *)expand_bits_8;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (eb[bits >> 4] & fg) ^ bg;
+		base[1] = (eb[bits & 0xf] & fg) ^ bg;
+		base = (unsigned int *) ((char *)base + rb);
+	}
+}
+
+static void btext_console_write(struct console *con, const char *s,
+				unsigned int n)
+{
+	btext_drawtext(s, n);
+}
+
+static struct console btext_console = {
+	.name	= "btext",
+	.write	= btext_console_write,
+	.flags	= CON_PRINTBUFFER | CON_ENABLED | CON_BOOT | CON_ANYTIME,
+	.index	= 0,
+};
+
+int __init btext_find_display(void)
+{
+	unsigned int node;
+	char type[32];
+	int ret;
+
+	node = prom_inst2pkg(prom_stdout);
+	if (prom_getproperty(node, "device_type", type, 32) < 0)
+		return -ENODEV;
+	if (strcmp(type, "display"))
+		return -ENODEV;
+
+	ret = btext_initialize(node);
+	if (!ret) {
+		btext_clearscreen();
+		register_console(&btext_console);
+	}
+	return ret;
+}
+
+static unsigned char vga_font[cmapsz] = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x81, 0xa5, 0x81, 0x81, 0xbd,
+0x99, 0x81, 0x81, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xff,
+0xdb, 0xff, 0xff, 0xc3, 0xe7, 0xff, 0xff, 0x7e, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x6c, 0xfe, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x7c, 0xfe,
+0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18,
+0x3c, 0x3c, 0xe7, 0xe7, 0xe7, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x7e, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
+0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
+0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00,
+0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x99, 0xbd,
+0xbd, 0x99, 0xc3, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x1e, 0x0e,
+0x1a, 0x32, 0x78, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x3c, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x30,
+0x30, 0x70, 0xf0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x63,
+0x7f, 0x63, 0x63, 0x63, 0x63, 0x67, 0xe7, 0xe6, 0xc0, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x18, 0x18, 0xdb, 0x3c, 0xe7, 0x3c, 0xdb, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfe, 0xf8,
+0xf0, 0xe0, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x0e,
+0x1e, 0x3e, 0xfe, 0x3e, 0x1e, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66,
+0x66, 0x00, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xdb,
+0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x1b, 0x1b, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x7c, 0xc6, 0x60, 0x38, 0x6c, 0xc6, 0xc6, 0x6c, 0x38, 0x0c, 0xc6,
+0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xfe, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
+0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0,
+0xc0, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x38, 0x7c, 0x7c, 0xfe, 0xfe, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0x7c, 0x7c,
+0x38, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x24, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6c,
+0x6c, 0xfe, 0x6c, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
+0x18, 0x18, 0x7c, 0xc6, 0xc2, 0xc0, 0x7c, 0x06, 0x06, 0x86, 0xc6, 0x7c,
+0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc2, 0xc6, 0x0c, 0x18,
+0x30, 0x60, 0xc6, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c,
+0x6c, 0x38, 0x76, 0xdc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x30, 0x30, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30,
+0x30, 0x30, 0x18, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x18,
+0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
+0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x02, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x38, 0x78, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
+0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0x06, 0x06, 0x3c, 0x06, 0x06, 0x06, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x1c, 0x3c, 0x6c, 0xcc, 0xfe,
+0x0c, 0x0c, 0x0c, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
+0xc0, 0xc0, 0xfc, 0x06, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x38, 0x60, 0xc0, 0xc0, 0xfc, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0x06, 0x06, 0x0c, 0x18,
+0x30, 0x30, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
+0xc6, 0xc6, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x06, 0x06, 0x0c, 0x78,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00,
+0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x06,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00,
+0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60,
+0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x0c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xde, 0xde,
+0xde, 0xdc, 0xc0, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38,
+0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x66, 0x66, 0x66, 0x66, 0xfc,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc0,
+0xc0, 0xc2, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x6c,
+0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xfe,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68,
+0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
+0xc2, 0xc0, 0xc0, 0xde, 0xc6, 0xc6, 0x66, 0x3a, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x0c,
+0x0c, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xe6, 0x66, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0x66, 0xe6,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x60, 0x60, 0x60, 0x60, 0x60,
+0x60, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xe7,
+0xff, 0xff, 0xdb, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, 0xc6,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66,
+0x66, 0x66, 0x7c, 0x60, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xd6, 0xde, 0x7c,
+0x0c, 0x0e, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x6c,
+0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
+0xc6, 0x60, 0x38, 0x0c, 0x06, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xff, 0xdb, 0x99, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
+0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x66,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x18,
+0x3c, 0x66, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
+0xc3, 0x66, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xff, 0xc3, 0x86, 0x0c, 0x18, 0x30, 0x60, 0xc1, 0xc3, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x30, 0x30, 0x30, 0x30, 0x30,
+0x30, 0x30, 0x30, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
+0xc0, 0xe0, 0x70, 0x38, 0x1c, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x3c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00,
+0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0c, 0x7c,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x60,
+0x60, 0x78, 0x6c, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc0, 0xc0, 0xc0, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x0c, 0x0c, 0x3c, 0x6c, 0xcc,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xf0,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc,
+0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xcc, 0x78, 0x00, 0x00, 0x00, 0xe0, 0x60,
+0x60, 0x6c, 0x76, 0x66, 0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x0e, 0x06, 0x06,
+0x06, 0x06, 0x06, 0x06, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0xe0, 0x60,
+0x60, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe6, 0xff, 0xdb,
+0xdb, 0xdb, 0xdb, 0xdb, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66,
+0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x76, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0x0c, 0x1e, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0x60, 0x60, 0xf0,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0x60,
+0x38, 0x0c, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x30,
+0x30, 0xfc, 0x30, 0x30, 0x30, 0x30, 0x36, 0x1c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0xc3,
+0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0x3c, 0x66, 0xc3,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xfe, 0xcc, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x0e, 0x18, 0x18, 0x18, 0x70, 0x18, 0x18, 0x18, 0x18, 0x0e,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x18,
+0x18, 0x18, 0x0e, 0x18, 0x18, 0x18, 0x18, 0x70, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6,
+0xc6, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
+0xc2, 0xc0, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x0c, 0x06, 0x7c, 0x00, 0x00,
+0x00, 0x00, 0xcc, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x00, 0x7c, 0xc6, 0xfe,
+0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c,
+0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xcc, 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0x78, 0x0c, 0x7c,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38,
+0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x60, 0x60, 0x66, 0x3c, 0x0c, 0x06,
+0x3c, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xfe,
+0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
+0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x00, 0x00, 0x38, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, 0x66,
+0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x60, 0x30, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6,
+0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38, 0x00,
+0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
+0x18, 0x30, 0x60, 0x00, 0xfe, 0x66, 0x60, 0x7c, 0x60, 0x60, 0x66, 0xfe,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6e, 0x3b, 0x1b,
+0x7e, 0xd8, 0xdc, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x6c,
+0xcc, 0xcc, 0xfe, 0xcc, 0xcc, 0xcc, 0xcc, 0xce, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x00, 0x7c, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18,
+0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x30, 0x78, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0xcc, 0xcc, 0xcc,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
+0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0x78, 0x00,
+0x00, 0xc6, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
+0xc3, 0xc0, 0xc0, 0xc0, 0xc3, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xe6, 0xfc,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0xff, 0x18,
+0xff, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66,
+0x7c, 0x62, 0x66, 0x6f, 0x66, 0x66, 0x66, 0xf3, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x0e, 0x1b, 0x18, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18,
+0xd8, 0x70, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0x78, 0x0c, 0x7c,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30,
+0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x18, 0x30, 0x60, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0xcc, 0xcc, 0xcc,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc,
+0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
+0x76, 0xdc, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x6c, 0x6c, 0x3e, 0x00, 0x7e, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
+0x38, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x30, 0x30, 0x00, 0x30, 0x30, 0x60, 0xc0, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
+0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xfe, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, 0x60, 0xce, 0x9b, 0x06,
+0x0c, 0x1f, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30,
+0x66, 0xce, 0x96, 0x3e, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18,
+0x00, 0x18, 0x18, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x6c, 0xd8, 0x6c, 0x36, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd8, 0x6c, 0x36,
+0x6c, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x44, 0x11, 0x44,
+0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44,
+0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa,
+0x55, 0xaa, 0x55, 0xaa, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77,
+0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0xf8,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
+0x36, 0xf6, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0xf6,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0xf6, 0x06, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xfe, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x37,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x37, 0x30, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xff, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36,
+0x36, 0xf7, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xff, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x3f,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x1f, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
+0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0, 0xf0, 0xf0, 0xf0,
+0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0,
+0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+0x0f, 0x0f, 0x0f, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x76, 0xdc, 0xd8, 0xd8, 0xd8, 0xdc, 0x76, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0xd8, 0xcc, 0xc6, 0xc6, 0xc6, 0xcc,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0xc6, 0xc0, 0xc0, 0xc0,
+0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xfe, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xfe, 0xc6, 0x60, 0x30, 0x18, 0x30, 0x60, 0xc6, 0xfe,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xd8, 0xd8,
+0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x66, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xc0, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x18, 0x3c, 0x66, 0x66,
+0x66, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38,
+0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x6c, 0x6c, 0x6c, 0xee,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x30, 0x18, 0x0c, 0x3e, 0x66,
+0x66, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x7e, 0xdb, 0xdb, 0xdb, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x03, 0x06, 0x7e, 0xdb, 0xdb, 0xf3, 0x7e, 0x60, 0xc0,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x30, 0x60, 0x60, 0x7c, 0x60,
+0x60, 0x60, 0x30, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c,
+0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18,
+0x18, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30,
+0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x00, 0x7e,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x1b, 0x1b, 0x1b, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x7e, 0x00, 0x18, 0x18, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x00,
+0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
+0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0c, 0x0c,
+0x0c, 0x0c, 0x0c, 0xec, 0x6c, 0x6c, 0x3c, 0x1c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xd8, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0xd8, 0x30, 0x60, 0xc8, 0xf8, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00,
+};
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index 1446df90ef85..e447938d39cf 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -185,6 +185,17 @@ static const struct manufacturer_info __initconst manufacturer_info[] = {
 		FPU(-1, NULL)
 	}
 },{
+	0xF,		/* Aeroflex Gaisler */
+	.cpu_info = {
+		CPU(3, "LEON"),
+		CPU(-1, NULL)
+	},
+	.fpu_info = {
+		FPU(2, "GRFPU"),
+		FPU(3, "GRFPU-Lite"),
+		FPU(-1, NULL)
+	}
+},{
 	0x17,
 	.cpu_info = {
 		CPU_PMU(0x10, "TI UltraSparc I   (SpitFire)", "ultra12"),
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index f41ecc5ac0b4..ec9c7bc67d21 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -400,6 +400,39 @@ linux_trap_ipi15_sun4d:
 	/* FIXME */
 1:	b,a	1b
 
+#ifdef CONFIG_SPARC_LEON
+
+	.globl	smpleon_ticker
+	/* SMP per-cpu ticker interrupts are handled specially. */
+smpleon_ticker:
+        SAVE_ALL
+	or	%l0, PSR_PIL, %g2
+	wr	%g2, 0x0, %psr
+	WRITE_PAUSE
+	wr	%g2, PSR_ET, %psr
+	WRITE_PAUSE
+	call	leon_percpu_timer_interrupt
+	 add	%sp, STACKFRAME_SZ, %o0
+	wr	%l0, PSR_ET, %psr
+	WRITE_PAUSE
+	RESTORE_ALL
+
+	.align	4
+	.globl	linux_trap_ipi15_leon
+linux_trap_ipi15_leon:
+	SAVE_ALL
+	or	%l0, PSR_PIL, %l4
+	wr	%l4, 0x0, %psr
+	WRITE_PAUSE
+	wr	%l4, PSR_ET, %psr
+	WRITE_PAUSE
+	call	leon_cross_call_irq
+	 nop
+	b	ret_trap_lockless_ipi
+	 clr	%l6
+
+#endif /* CONFIG_SPARC_LEON */
+
 #endif /* CONFIG_SMP */
 
 	/* This routine handles illegal instructions and privileged
diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S
index 439d82a95ac9..21bb2590d4ae 100644
--- a/arch/sparc/kernel/head_32.S
+++ b/arch/sparc/kernel/head_32.S
@@ -811,9 +811,31 @@ found_version:
 got_prop:
 #ifdef CONFIG_SPARC_LEON
 	        /* no cpu-type check is needed, it is a SPARC-LEON */
+#ifdef CONFIG_SMP
+		ba leon_smp_init
+		 nop
+
+		.global leon_smp_init
+leon_smp_init:
+		sethi	%hi(boot_cpu_id), %g1    ! master always 0
+		stb	%g0, [%g1 + %lo(boot_cpu_id)]
+		sethi	%hi(boot_cpu_id4), %g1   ! master always 0
+		stb	%g0, [%g1 + %lo(boot_cpu_id4)]
+
+		rd     %asr17,%g1
+		srl    %g1,28,%g1
+
+		cmp %g0,%g1
+		 beq sun4c_continue_boot         !continue with master
+		nop
+
+		ba leon_smp_cpu_startup
+		 nop
+#else
 		ba sun4c_continue_boot
 		 nop
 #endif
+#endif
 		set	cputypval, %o2
 		ldub	[%o2 + 0x4], %l1
 
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 9f61fd8cbb7b..3c8c44f6a41c 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -48,8 +48,13 @@
 #include <asm/dma.h>
 #include <asm/iommu.h>
 #include <asm/io-unit.h>
+#include <asm/leon.h>
 
+#ifdef CONFIG_SPARC_LEON
+#define mmu_inval_dma_area(p, l) leon_flush_dcache_all()
+#else
 #define mmu_inval_dma_area(p, l)	/* Anton pulled it out for 2.4.0-xx */
+#endif
 
 static struct resource *_sparc_find_resource(struct resource *r,
 					     unsigned long);
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index 8ab1d4728a4b..ce996f97855f 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -187,7 +187,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 #endif
-		seq_printf(p, " %9s", irq_desc[i].chip->typename);
+		seq_printf(p, " %9s", irq_desc[i].chip->name);
 		seq_printf(p, "  %s", action->name);
 
 		for (action=action->next; action; action = action->next)
@@ -484,7 +484,7 @@ static void sun4v_virq_eoi(unsigned int virt_irq)
 }
 
 static struct irq_chip sun4u_irq = {
-	.typename	= "sun4u",
+	.name		= "sun4u",
 	.enable		= sun4u_irq_enable,
 	.disable	= sun4u_irq_disable,
 	.eoi		= sun4u_irq_eoi,
@@ -492,7 +492,7 @@ static struct irq_chip sun4u_irq = {
 };
 
 static struct irq_chip sun4v_irq = {
-	.typename	= "sun4v",
+	.name		= "sun4v",
 	.enable		= sun4v_irq_enable,
 	.disable	= sun4v_irq_disable,
 	.eoi		= sun4v_irq_eoi,
@@ -500,7 +500,7 @@ static struct irq_chip sun4v_irq = {
 };
 
 static struct irq_chip sun4v_virq = {
-	.typename	= "vsun4v",
+	.name		= "vsun4v",
 	.enable		= sun4v_virq_enable,
 	.disable	= sun4v_virq_disable,
 	.eoi		= sun4v_virq_eoi,
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index 54d8a5bd4824..87f1760c0aa2 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -12,11 +12,14 @@
 #include <linux/of_platform.h>
 #include <linux/interrupt.h>
 #include <linux/of_device.h>
+
 #include <asm/oplib.h>
 #include <asm/timer.h>
 #include <asm/prom.h>
 #include <asm/leon.h>
 #include <asm/leon_amba.h>
+#include <asm/traps.h>
+#include <asm/cacheflush.h>
 
 #include "prom.h"
 #include "irq.h"
@@ -115,6 +118,21 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 				      (((1000000 / 100) - 1)));
 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0);
 
+#ifdef CONFIG_SMP
+		leon_percpu_timer_dev[0].start = (int)leon3_gptimer_regs;
+		leon_percpu_timer_dev[0].irq = leon3_gptimer_irq+1;
+
+		if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) &
+		      (1<<LEON3_GPTIMER_SEPIRQ))) {
+			prom_printf("irq timer not configured with seperate irqs \n");
+			BUG();
+		}
+
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].val, 0);
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/100) - 1)));
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl, 0);
+# endif
+
 	} else {
 		printk(KERN_ERR "No Timer/irqctrl found\n");
 		BUG();
@@ -130,11 +148,41 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 		prom_halt();
 	}
 
+# ifdef CONFIG_SMP
+	{
+		unsigned long flags;
+		struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (leon_percpu_timer_dev[0].irq - 1)];
+
+		/* For SMP we use the level 14 ticker, however the bootup code
+		 * has copied the firmwares level 14 vector into boot cpu's
+		 * trap table, we must fix this now or we get squashed.
+		 */
+		local_irq_save(flags);
+
+		patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */
+
+		/* Adjust so that we jump directly to smpleon_ticker */
+		trap_table->inst_three += smpleon_ticker - real_irq_entry;
+
+		local_flush_cache_all();
+		local_irq_restore(flags);
+	}
+# endif
+
 	if (leon3_gptimer_regs) {
 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl,
 				      LEON3_GPTIMER_EN |
 				      LEON3_GPTIMER_RL |
 				      LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN);
+
+#ifdef CONFIG_SMP
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl,
+				      LEON3_GPTIMER_EN |
+				      LEON3_GPTIMER_RL |
+				      LEON3_GPTIMER_LD |
+				      LEON3_GPTIMER_IRQEN);
+#endif
+
 	}
 }
 
@@ -175,6 +223,42 @@ void __init leon_node_init(struct device_node *dp, struct device_node ***nextp)
 	}
 }
 
+#ifdef CONFIG_SMP
+
+void leon_set_cpu_int(int cpu, int level)
+{
+	unsigned long mask;
+	mask = get_irqmask(level);
+	LEON3_BYPASS_STORE_PA(&leon3_irqctrl_regs->force[cpu], mask);
+}
+
+static void leon_clear_ipi(int cpu, int level)
+{
+	unsigned long mask;
+	mask = get_irqmask(level);
+	LEON3_BYPASS_STORE_PA(&leon3_irqctrl_regs->force[cpu], mask<<16);
+}
+
+static void leon_set_udt(int cpu)
+{
+}
+
+void leon_clear_profile_irq(int cpu)
+{
+}
+
+void leon_enable_irq_cpu(unsigned int irq_nr, unsigned int cpu)
+{
+	unsigned long mask, flags, *addr;
+	mask = get_irqmask(irq_nr);
+	local_irq_save(flags);
+	addr = (unsigned long *)&(leon3_irqctrl_regs->mask[cpu]);
+	LEON3_BYPASS_STORE_PA(addr, (LEON3_BYPASS_LOAD_PA(addr) | (mask)));
+	local_irq_restore(flags);
+}
+
+#endif
+
 void __init leon_init_IRQ(void)
 {
 	sparc_init_timers = leon_init_timers;
diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c
new file mode 100644
index 000000000000..05c0dadd6371
--- /dev/null
+++ b/arch/sparc/kernel/leon_smp.c
@@ -0,0 +1,468 @@
+/* leon_smp.c: Sparc-Leon SMP support.
+ *
+ * based on sun4m_smp.c
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com) Aeroflex Gaisler AB
+ * Copyright (C) 2009 Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+ */
+
+#include <asm/head.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/profile.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+#include <asm/irq_regs.h>
+
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/oplib.h>
+#include <asm/cpudata.h>
+#include <asm/asi.h>
+#include <asm/leon.h>
+#include <asm/leon_amba.h>
+
+#ifdef CONFIG_SPARC_LEON
+
+#include "irq.h"
+
+extern ctxd_t *srmmu_ctx_table_phys;
+static int smp_processors_ready;
+extern volatile unsigned long cpu_callin_map[NR_CPUS];
+extern unsigned char boot_cpu_id;
+extern cpumask_t smp_commenced_mask;
+void __init leon_configure_cache_smp(void);
+
+static inline unsigned long do_swap(volatile unsigned long *ptr,
+				    unsigned long val)
+{
+	__asm__ __volatile__("swapa [%1] %2, %0\n\t" : "=&r"(val)
+			     : "r"(ptr), "i"(ASI_LEON_DCACHE_MISS)
+			     : "memory");
+	return val;
+}
+
+static void smp_setup_percpu_timer(void);
+
+void __cpuinit leon_callin(void)
+{
+	int cpuid = hard_smpleon_processor_id();
+
+	local_flush_cache_all();
+	local_flush_tlb_all();
+	leon_configure_cache_smp();
+
+	/* Get our local ticker going. */
+	smp_setup_percpu_timer();
+
+	calibrate_delay();
+	smp_store_cpu_info(cpuid);
+
+	local_flush_cache_all();
+	local_flush_tlb_all();
+
+	/*
+	 * Unblock the master CPU _only_ when the scheduler state
+	 * of all secondary CPUs will be up-to-date, so after
+	 * the SMP initialization the master will be just allowed
+	 * to call the scheduler code.
+	 * Allow master to continue.
+	 */
+	do_swap(&cpu_callin_map[cpuid], 1);
+
+	local_flush_cache_all();
+	local_flush_tlb_all();
+
+	cpu_probe();
+
+	/* Fix idle thread fields. */
+	__asm__ __volatile__("ld [%0], %%g6\n\t" : : "r"(&current_set[cpuid])
+			     : "memory" /* paranoid */);
+
+	/* Attach to the address space of init_task. */
+	atomic_inc(&init_mm.mm_count);
+	current->active_mm = &init_mm;
+
+	while (!cpu_isset(cpuid, smp_commenced_mask))
+		mb();
+
+	local_irq_enable();
+	cpu_set(cpuid, cpu_online_map);
+}
+
+/*
+ *	Cycle through the processors asking the PROM to start each one.
+ */
+
+extern struct linux_prom_registers smp_penguin_ctable;
+
+void __init leon_configure_cache_smp(void)
+{
+	unsigned long cfg = sparc_leon3_get_dcachecfg();
+	int me = smp_processor_id();
+
+	if (ASI_LEON3_SYSCTRL_CFG_SSIZE(cfg) > 4) {
+		printk(KERN_INFO "Note: SMP with snooping only works on 4k cache, found %dk(0x%x) on cpu %d, disabling caches\n",
+		     (unsigned int)ASI_LEON3_SYSCTRL_CFG_SSIZE(cfg),
+		     (unsigned int)cfg, (unsigned int)me);
+		sparc_leon3_disable_cache();
+	} else {
+		if (cfg & ASI_LEON3_SYSCTRL_CFG_SNOOPING) {
+			sparc_leon3_enable_snooping();
+		} else {
+			printk(KERN_INFO "Note: You have to enable snooping in the vhdl model cpu %d, disabling caches\n",
+			     me);
+			sparc_leon3_disable_cache();
+		}
+	}
+
+	local_flush_cache_all();
+	local_flush_tlb_all();
+}
+
+void leon_smp_setbroadcast(unsigned int mask)
+{
+	int broadcast =
+	    ((LEON3_BYPASS_LOAD_PA(&(leon3_irqctrl_regs->mpstatus)) >>
+	      LEON3_IRQMPSTATUS_BROADCAST) & 1);
+	if (!broadcast) {
+		prom_printf("######## !!!! The irqmp-ctrl must have broadcast enabled, smp wont work !!!!! ####### nr cpus: %d\n",
+		     leon_smp_nrcpus());
+		if (leon_smp_nrcpus() > 1) {
+			BUG();
+		} else {
+			prom_printf("continue anyway\n");
+			return;
+		}
+	}
+	LEON_BYPASS_STORE_PA(&(leon3_irqctrl_regs->mpbroadcast), mask);
+}
+
+unsigned int leon_smp_getbroadcast(void)
+{
+	unsigned int mask;
+	mask = LEON_BYPASS_LOAD_PA(&(leon3_irqctrl_regs->mpbroadcast));
+	return mask;
+}
+
+int leon_smp_nrcpus(void)
+{
+	int nrcpu =
+	    ((LEON3_BYPASS_LOAD_PA(&(leon3_irqctrl_regs->mpstatus)) >>
+	      LEON3_IRQMPSTATUS_CPUNR) & 0xf) + 1;
+	return nrcpu;
+}
+
+void __init leon_boot_cpus(void)
+{
+	int nrcpu = leon_smp_nrcpus();
+	int me = smp_processor_id();
+
+	printk(KERN_INFO "%d:(%d:%d) cpus mpirq at 0x%x \n", (unsigned int)me,
+	       (unsigned int)nrcpu, (unsigned int)NR_CPUS,
+	       (unsigned int)&(leon3_irqctrl_regs->mpstatus));
+
+	leon_enable_irq_cpu(LEON3_IRQ_CROSS_CALL, me);
+	leon_enable_irq_cpu(LEON3_IRQ_TICKER, me);
+	leon_enable_irq_cpu(LEON3_IRQ_RESCHEDULE, me);
+
+	leon_smp_setbroadcast(1 << LEON3_IRQ_TICKER);
+
+	leon_configure_cache_smp();
+	smp_setup_percpu_timer();
+	local_flush_cache_all();
+
+}
+
+int __cpuinit leon_boot_one_cpu(int i)
+{
+
+	struct task_struct *p;
+	int timeout;
+
+	/* Cook up an idler for this guy. */
+	p = fork_idle(i);
+
+	current_set[i] = task_thread_info(p);
+
+	/* See trampoline.S:leon_smp_cpu_startup for details...
+	 * Initialize the contexts table
+	 * Since the call to prom_startcpu() trashes the structure,
+	 * we need to re-initialize it for each cpu
+	 */
+	smp_penguin_ctable.which_io = 0;
+	smp_penguin_ctable.phys_addr = (unsigned int)srmmu_ctx_table_phys;
+	smp_penguin_ctable.reg_size = 0;
+
+	/* whirrr, whirrr, whirrrrrrrrr... */
+	printk(KERN_INFO "Starting CPU %d : (irqmp: 0x%x)\n", (unsigned int)i,
+	       (unsigned int)&leon3_irqctrl_regs->mpstatus);
+	local_flush_cache_all();
+
+	LEON_BYPASS_STORE_PA(&(leon3_irqctrl_regs->mpstatus), 1 << i);
+
+	/* wheee... it's going... */
+	for (timeout = 0; timeout < 10000; timeout++) {
+		if (cpu_callin_map[i])
+			break;
+		udelay(200);
+	}
+	printk(KERN_INFO "Started CPU %d \n", (unsigned int)i);
+
+	if (!(cpu_callin_map[i])) {
+		printk(KERN_ERR "Processor %d is stuck.\n", i);
+		return -ENODEV;
+	} else {
+		leon_enable_irq_cpu(LEON3_IRQ_CROSS_CALL, i);
+		leon_enable_irq_cpu(LEON3_IRQ_TICKER, i);
+		leon_enable_irq_cpu(LEON3_IRQ_RESCHEDULE, i);
+	}
+
+	local_flush_cache_all();
+	return 0;
+}
+
+void __init leon_smp_done(void)
+{
+
+	int i, first;
+	int *prev;
+
+	/* setup cpu list for irq rotation */
+	first = 0;
+	prev = &first;
+	for (i = 0; i < NR_CPUS; i++) {
+		if (cpu_online(i)) {
+			*prev = i;
+			prev = &cpu_data(i).next;
+		}
+	}
+	*prev = first;
+	local_flush_cache_all();
+
+	/* Free unneeded trap tables */
+	if (!cpu_isset(1, cpu_present_map)) {
+		ClearPageReserved(virt_to_page(trapbase_cpu1));
+		init_page_count(virt_to_page(trapbase_cpu1));
+		free_page((unsigned long)trapbase_cpu1);
+		totalram_pages++;
+		num_physpages++;
+	}
+	if (!cpu_isset(2, cpu_present_map)) {
+		ClearPageReserved(virt_to_page(trapbase_cpu2));
+		init_page_count(virt_to_page(trapbase_cpu2));
+		free_page((unsigned long)trapbase_cpu2);
+		totalram_pages++;
+		num_physpages++;
+	}
+	if (!cpu_isset(3, cpu_present_map)) {
+		ClearPageReserved(virt_to_page(trapbase_cpu3));
+		init_page_count(virt_to_page(trapbase_cpu3));
+		free_page((unsigned long)trapbase_cpu3);
+		totalram_pages++;
+		num_physpages++;
+	}
+	/* Ok, they are spinning and ready to go. */
+	smp_processors_ready = 1;
+
+}
+
+void leon_irq_rotate(int cpu)
+{
+}
+
+static struct smp_funcall {
+	smpfunc_t func;
+	unsigned long arg1;
+	unsigned long arg2;
+	unsigned long arg3;
+	unsigned long arg4;
+	unsigned long arg5;
+	unsigned long processors_in[NR_CPUS];	/* Set when ipi entered. */
+	unsigned long processors_out[NR_CPUS];	/* Set when ipi exited. */
+} ccall_info;
+
+static DEFINE_SPINLOCK(cross_call_lock);
+
+/* Cross calls must be serialized, at least currently. */
+static void leon_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
+			    unsigned long arg2, unsigned long arg3,
+			    unsigned long arg4)
+{
+	if (smp_processors_ready) {
+		register int high = NR_CPUS - 1;
+		unsigned long flags;
+
+		spin_lock_irqsave(&cross_call_lock, flags);
+
+		{
+			/* If you make changes here, make sure gcc generates proper code... */
+			register smpfunc_t f asm("i0") = func;
+			register unsigned long a1 asm("i1") = arg1;
+			register unsigned long a2 asm("i2") = arg2;
+			register unsigned long a3 asm("i3") = arg3;
+			register unsigned long a4 asm("i4") = arg4;
+			register unsigned long a5 asm("i5") = 0;
+
+			__asm__ __volatile__("std %0, [%6]\n\t"
+					     "std %2, [%6 + 8]\n\t"
+					     "std %4, [%6 + 16]\n\t" : :
+					     "r"(f), "r"(a1), "r"(a2), "r"(a3),
+					     "r"(a4), "r"(a5),
+					     "r"(&ccall_info.func));
+		}
+
+		/* Init receive/complete mapping, plus fire the IPI's off. */
+		{
+			register int i;
+
+			cpu_clear(smp_processor_id(), mask);
+			cpus_and(mask, cpu_online_map, mask);
+			for (i = 0; i <= high; i++) {
+				if (cpu_isset(i, mask)) {
+					ccall_info.processors_in[i] = 0;
+					ccall_info.processors_out[i] = 0;
+					set_cpu_int(i, LEON3_IRQ_CROSS_CALL);
+
+				}
+			}
+		}
+
+		{
+			register int i;
+
+			i = 0;
+			do {
+				if (!cpu_isset(i, mask))
+					continue;
+
+				while (!ccall_info.processors_in[i])
+					barrier();
+			} while (++i <= high);
+
+			i = 0;
+			do {
+				if (!cpu_isset(i, mask))
+					continue;
+
+				while (!ccall_info.processors_out[i])
+					barrier();
+			} while (++i <= high);
+		}
+
+		spin_unlock_irqrestore(&cross_call_lock, flags);
+	}
+}
+
+/* Running cross calls. */
+void leon_cross_call_irq(void)
+{
+	int i = smp_processor_id();
+
+	ccall_info.processors_in[i] = 1;
+	ccall_info.func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3,
+			ccall_info.arg4, ccall_info.arg5);
+	ccall_info.processors_out[i] = 1;
+}
+
+void leon_percpu_timer_interrupt(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs;
+	int cpu = smp_processor_id();
+
+	old_regs = set_irq_regs(regs);
+
+	leon_clear_profile_irq(cpu);
+
+	profile_tick(CPU_PROFILING);
+
+	if (!--prof_counter(cpu)) {
+		int user = user_mode(regs);
+
+		irq_enter();
+		update_process_times(user);
+		irq_exit();
+
+		prof_counter(cpu) = prof_multiplier(cpu);
+	}
+	set_irq_regs(old_regs);
+}
+
+static void __init smp_setup_percpu_timer(void)
+{
+	int cpu = smp_processor_id();
+
+	prof_counter(cpu) = prof_multiplier(cpu) = 1;
+}
+
+void __init leon_blackbox_id(unsigned *addr)
+{
+	int rd = *addr & 0x3e000000;
+	int rs1 = rd >> 11;
+
+	/* patch places where ___b_hard_smp_processor_id appears */
+	addr[0] = 0x81444000 | rd;	/* rd %asr17, reg */
+	addr[1] = 0x8130201c | rd | rs1;	/* srl reg, 0x1c, reg */
+	addr[2] = 0x01000000;	/* nop */
+}
+
+void __init leon_blackbox_current(unsigned *addr)
+{
+	int rd = *addr & 0x3e000000;
+	int rs1 = rd >> 11;
+
+	/* patch LOAD_CURRENT macro where ___b_load_current appears */
+	addr[0] = 0x81444000 | rd;	/* rd %asr17, reg */
+	addr[2] = 0x8130201c | rd | rs1;	/* srl reg, 0x1c, reg */
+	addr[4] = 0x81282002 | rd | rs1;	/* sll reg, 0x2, reg */
+
+}
+
+/*
+ * CPU idle callback function
+ * See .../arch/sparc/kernel/process.c
+ */
+void pmc_leon_idle(void)
+{
+	__asm__ volatile ("mov %g0, %asr19");
+}
+
+void __init leon_init_smp(void)
+{
+	/* Patch ipi15 trap table */
+	t_nmi[1] = t_nmi[1] + (linux_trap_ipi15_leon - linux_trap_ipi15_sun4m);
+
+	BTFIXUPSET_BLACKBOX(hard_smp_processor_id, leon_blackbox_id);
+	BTFIXUPSET_BLACKBOX(load_current, leon_blackbox_current);
+	BTFIXUPSET_CALL(smp_cross_call, leon_cross_call, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(__hard_smp_processor_id, __leon_processor_id,
+			BTFIXUPCALL_NORM);
+
+#ifndef PMC_NO_IDLE
+	/* Assign power management IDLE handler */
+	pm_idle = pmc_leon_idle;
+	printk(KERN_INFO "leon: power management initialized\n");
+#endif
+
+}
+
+#endif /* CONFIG_SPARC_LEON */
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index c68648662802..b85374f7cf94 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -1081,3 +1081,10 @@ void pci_resource_to_user(const struct pci_dev *pdev, int bar,
 	*start = rp->start - offset;
 	*end = rp->end - offset;
 }
+
+static int __init pcibios_init(void)
+{
+	pci_dfl_cache_line_size = 64 >> 2;
+	return 0;
+}
+subsys_initcall(pcibios_init);
diff --git a/arch/sparc/kernel/pci_msi.c b/arch/sparc/kernel/pci_msi.c
index f1be37a7b123..e1b0541feb19 100644
--- a/arch/sparc/kernel/pci_msi.c
+++ b/arch/sparc/kernel/pci_msi.c
@@ -112,7 +112,7 @@ static void free_msi(struct pci_pbm_info *pbm, int msi_num)
 }
 
 static struct irq_chip msi_irq = {
-	.typename	= "PCI-MSI",
+	.name		= "PCI-MSI",
 	.mask		= mask_msi_irq,
 	.unmask		= unmask_msi_irq,
 	.enable		= unmask_msi_irq,
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index 21180339cb09..a2a79e76344f 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -46,6 +46,7 @@
 #include <asm/setup.h>
 #include <asm/mmu.h>
 #include <asm/ns87303.h>
+#include <asm/btext.h>
 
 #ifdef CONFIG_IP_PNP
 #include <net/ipconfig.h>
@@ -286,7 +287,10 @@ void __init setup_arch(char **cmdline_p)
 	parse_early_param();
 
 	boot_flags_init(*cmdline_p);
-	register_console(&prom_early_console);
+#ifdef CONFIG_EARLYFB
+	if (btext_find_display())
+#endif
+		register_console(&prom_early_console);
 
 	if (tlb_type == hypervisor)
 		printk("ARCH: SUN4V\n");
diff --git a/arch/sparc/kernel/smp_32.c b/arch/sparc/kernel/smp_32.c
index 132d81fb2616..91c10fb70858 100644
--- a/arch/sparc/kernel/smp_32.c
+++ b/arch/sparc/kernel/smp_32.c
@@ -32,6 +32,7 @@
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
 #include <asm/cpudata.h>
+#include <asm/leon.h>
 
 #include "irq.h"
 
@@ -96,6 +97,9 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	case sun4d:
 		smp4d_smp_done();
 		break;
+	case sparc_leon:
+		leon_smp_done();
+		break;
 	case sun4e:
 		printk("SUN4E\n");
 		BUG();
@@ -306,6 +310,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	case sun4d:
 		smp4d_boot_cpus();
 		break;
+	case sparc_leon:
+		leon_boot_cpus();
+		break;
 	case sun4e:
 		printk("SUN4E\n");
 		BUG();
@@ -376,6 +383,9 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	case sun4d:
 		ret = smp4d_boot_one_cpu(cpu);
 		break;
+	case sparc_leon:
+		ret = leon_boot_one_cpu(cpu);
+		break;
 	case sun4e:
 		printk("SUN4E\n");
 		BUG();
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index 04e28b2671c8..dc0ac197e7e2 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -26,11 +26,6 @@
 #include <linux/nfs_fs.h>
 #include <linux/quota.h>
 #include <linux/module.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/nfsd/nfsd.h>
-#include <linux/nfsd/cache.h>
-#include <linux/nfsd/xdr.h>
-#include <linux/nfsd/syscall.h>
 #include <linux/poll.h>
 #include <linux/personality.h>
 #include <linux/stat.h>
@@ -569,85 +564,6 @@ asmlinkage long sparc32_open(const char __user *filename,
 	return do_sys_open(AT_FDCWD, filename, flags, mode);
 }
 
-extern unsigned long do_mremap(unsigned long addr,
-	unsigned long old_len, unsigned long new_len,
-	unsigned long flags, unsigned long new_addr);
-                
-asmlinkage unsigned long sys32_mremap(unsigned long addr,
-	unsigned long old_len, unsigned long new_len,
-	unsigned long flags, u32 __new_addr)
-{
-	unsigned long ret = -EINVAL;
-	unsigned long new_addr = __new_addr;
-
-	if (unlikely(sparc_mmap_check(addr, old_len)))
-		goto out;
-	if (unlikely(sparc_mmap_check(new_addr, new_len)))
-		goto out;
-	down_write(&current->mm->mmap_sem);
-	ret = do_mremap(addr, old_len, new_len, flags, new_addr);
-	up_write(&current->mm->mmap_sem);
-out:
-	return ret;       
-}
-
-struct __sysctl_args32 {
-	u32 name;
-	int nlen;
-	u32 oldval;
-	u32 oldlenp;
-	u32 newval;
-	u32 newlen;
-	u32 __unused[4];
-};
-
-asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args)
-{
-#ifndef CONFIG_SYSCTL_SYSCALL
-	return -ENOSYS;
-#else
-	struct __sysctl_args32 tmp;
-	int error;
-	size_t oldlen, __user *oldlenp = NULL;
-	unsigned long addr = (((unsigned long)&args->__unused[0]) + 7UL) & ~7UL;
-
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		return -EFAULT;
-
-	if (tmp.oldval && tmp.oldlenp) {
-		/* Duh, this is ugly and might not work if sysctl_args
-		   is in read-only memory, but do_sysctl does indirectly
-		   a lot of uaccess in both directions and we'd have to
-		   basically copy the whole sysctl.c here, and
-		   glibc's __sysctl uses rw memory for the structure
-		   anyway.  */
-		if (get_user(oldlen, (u32 __user *)(unsigned long)tmp.oldlenp) ||
-		    put_user(oldlen, (size_t __user *)addr))
-			return -EFAULT;
-		oldlenp = (size_t __user *)addr;
-	}
-
-	lock_kernel();
-	error = do_sysctl((int __user *)(unsigned long) tmp.name,
-			  tmp.nlen,
-			  (void __user *)(unsigned long) tmp.oldval,
-			  oldlenp,
-			  (void __user *)(unsigned long) tmp.newval,
-			  tmp.newlen);
-	unlock_kernel();
-	if (oldlenp) {
-		if (!error) {
-			if (get_user(oldlen, (size_t __user *)addr) ||
-			    put_user(oldlen, (u32 __user *)(unsigned long) tmp.oldlenp))
-				error = -EFAULT;
-		}
-		if (copy_to_user(args->__unused, tmp.__unused, sizeof(tmp.__unused)))
-			error = -EFAULT;
-	}
-	return error;
-#endif
-}
-
 long sys32_lookup_dcookie(unsigned long cookie_high,
 			  unsigned long cookie_low,
 			  char __user *buf, size_t len)
diff --git a/arch/sparc/kernel/sys_sparc_32.c b/arch/sparc/kernel/sys_sparc_32.c
index 03035c852a43..3a82e65d8db2 100644
--- a/arch/sparc/kernel/sys_sparc_32.c
+++ b/arch/sparc/kernel/sys_sparc_32.c
@@ -45,7 +45,8 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi
 		/* We do not accept a shared mapping if it would violate
 		 * cache aliasing constraints.
 		 */
-		if ((flags & MAP_SHARED) && (addr & (SHMLBA - 1)))
+		if ((flags & MAP_SHARED) &&
+		    ((addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1)))
 			return -EINVAL;
 		return addr;
 	}
@@ -79,15 +80,6 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi
 	}
 }
 
-asmlinkage unsigned long sparc_brk(unsigned long brk)
-{
-	if(ARCH_SUN4C) {
-		if ((brk & 0xe0000000) != (current->mm->brk & 0xe0000000))
-			return current->mm->brk;
-	}
-	return sys_brk(brk);
-}
-
 /*
  * sys_pipe() is the normal C calling standard for creating
  * a pipe. It's not the way unix traditionally does this, though.
@@ -234,31 +226,6 @@ int sparc_mmap_check(unsigned long addr, unsigned long len)
 }
 
 /* Linux version of mmap */
-static unsigned long do_mmap2(unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags, unsigned long fd,
-	unsigned long pgoff)
-{
-	struct file * file = NULL;
-	unsigned long retval = -EBADF;
-
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	len = PAGE_ALIGN(len);
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	down_write(&current->mm->mmap_sem);
-	retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return retval;
-}
 
 asmlinkage unsigned long sys_mmap2(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags, unsigned long fd,
@@ -266,14 +233,16 @@ asmlinkage unsigned long sys_mmap2(unsigned long addr, unsigned long len,
 {
 	/* Make sure the shift for mmap2 is constant (12), no matter what PAGE_SIZE
 	   we have. */
-	return do_mmap2(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT - 12));
+	return sys_mmap_pgoff(addr, len, prot, flags, fd,
+			      pgoff >> (PAGE_SHIFT - 12));
 }
 
 asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags, unsigned long fd,
 	unsigned long off)
 {
-	return do_mmap2(addr, len, prot, flags, fd, off >> PAGE_SHIFT);
+	/* no alignment check? */
+	return sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT);
 }
 
 long sparc_remap_file_pages(unsigned long start, unsigned long size,
@@ -287,27 +256,6 @@ long sparc_remap_file_pages(unsigned long start, unsigned long size,
 				    (pgoff >> (PAGE_SHIFT - 12)), flags);
 }
 
-extern unsigned long do_mremap(unsigned long addr,
-	unsigned long old_len, unsigned long new_len,
-	unsigned long flags, unsigned long new_addr);
-                
-asmlinkage unsigned long sparc_mremap(unsigned long addr,
-	unsigned long old_len, unsigned long new_len,
-	unsigned long flags, unsigned long new_addr)
-{
-	unsigned long ret = -EINVAL;
-
-	if (unlikely(sparc_mmap_check(addr, old_len)))
-		goto out;
-	if (unlikely(sparc_mmap_check(new_addr, new_len)))
-		goto out;
-	down_write(&current->mm->mmap_sem);
-	ret = do_mremap(addr, old_len, new_len, flags, new_addr);
-	up_write(&current->mm->mmap_sem);
-out:
-	return ret;       
-}
-
 /* we come to here via sys_nis_syscall so it can setup the regs argument */
 asmlinkage unsigned long
 c_sys_nis_syscall (struct pt_regs *regs)
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index e2d102447a43..cfa0e19abe3b 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -317,10 +317,14 @@ bottomup:
 unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, unsigned long len, unsigned long pgoff, unsigned long flags)
 {
 	unsigned long align_goal, addr = -ENOMEM;
+	unsigned long (*get_area)(struct file *, unsigned long,
+				  unsigned long, unsigned long, unsigned long);
+
+	get_area = current->mm->get_unmapped_area;
 
 	if (flags & MAP_FIXED) {
 		/* Ok, don't mess with it. */
-		return get_unmapped_area(NULL, orig_addr, len, pgoff, flags);
+		return get_area(NULL, orig_addr, len, pgoff, flags);
 	}
 	flags &= ~MAP_SHARED;
 
@@ -333,7 +337,7 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, u
 		align_goal = (64UL * 1024);
 
 	do {
-		addr = get_unmapped_area(NULL, orig_addr, len + (align_goal - PAGE_SIZE), pgoff, flags);
+		addr = get_area(NULL, orig_addr, len + (align_goal - PAGE_SIZE), pgoff, flags);
 		if (!(addr & ~PAGE_MASK)) {
 			addr = (addr + (align_goal - 1UL)) & ~(align_goal - 1UL);
 			break;
@@ -351,7 +355,7 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, u
 	 * be obtained.
 	 */
 	if (addr & ~PAGE_MASK)
-		addr = get_unmapped_area(NULL, orig_addr, len, pgoff, flags);
+		addr = get_area(NULL, orig_addr, len, pgoff, flags);
 
 	return addr;
 }
@@ -399,18 +403,6 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
 	}
 }
 
-SYSCALL_DEFINE1(sparc_brk, unsigned long, brk)
-{
-	/* People could try to be nasty and use ta 0x6d in 32bit programs */
-	if (test_thread_flag(TIF_32BIT) && brk >= STACK_TOP32)
-		return current->mm->brk;
-
-	if (unlikely(straddles_64bit_va_hole(current->mm->brk, brk)))
-		return current->mm->brk;
-
-	return sys_brk(brk);
-}
-                                                                
 /*
  * sys_pipe() is the normal C calling standard for creating
  * a pipe. It's not the way unix traditionally does this, though.
@@ -568,23 +560,13 @@ SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
 		unsigned long, prot, unsigned long, flags, unsigned long, fd,
 		unsigned long, off)
 {
-	struct file * file = NULL;
-	unsigned long retval = -EBADF;
-
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	len = PAGE_ALIGN(len);
+	unsigned long retval = -EINVAL;
 
-	down_write(&current->mm->mmap_sem);
-	retval = do_mmap(file, addr, len, prot, flags, off);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
+	if ((off + PAGE_ALIGN(len)) < off)
+		goto out;
+	if (off & ~PAGE_MASK)
+		goto out;
+	retval = sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT);
 out:
 	return retval;
 }
@@ -614,12 +596,6 @@ SYSCALL_DEFINE5(64_mremap, unsigned long, addr,	unsigned long, old_len,
 
 	if (test_thread_flag(TIF_32BIT))
 		goto out;
-	if (unlikely(new_len >= VA_EXCLUDE_START))
-		goto out;
-	if (unlikely(sparc_mmap_check(addr, old_len)))
-		goto out;
-	if (unlikely(sparc_mmap_check(new_addr, new_len)))
-		goto out;
 
 	down_write(&current->mm->mmap_sem);
 	ret = do_mremap(addr, old_len, new_len, flags, new_addr);
diff --git a/arch/sparc/kernel/systbls.h b/arch/sparc/kernel/systbls.h
index a63c5d2d9849..d2f999ae2b85 100644
--- a/arch/sparc/kernel/systbls.h
+++ b/arch/sparc/kernel/systbls.h
@@ -9,7 +9,6 @@
 struct new_utsname;
 
 extern asmlinkage unsigned long sys_getpagesize(void);
-extern asmlinkage unsigned long sparc_brk(unsigned long brk);
 extern asmlinkage long sparc_pipe(struct pt_regs *regs);
 extern asmlinkage long sys_ipc(unsigned int call, int first,
 			       unsigned long second,
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 0f1658d37490..801fc8e5a0e8 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -19,7 +19,7 @@ sys_call_table:
 /*0*/	.long sys_restart_syscall, sys_exit, sys_fork, sys_read, sys_write
 /*5*/	.long sys_open, sys_close, sys_wait4, sys_creat, sys_link
 /*10*/  .long sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys_mknod
-/*15*/	.long sys_chmod, sys_lchown16, sparc_brk, sys_nis_syscall, sys_lseek
+/*15*/	.long sys_chmod, sys_lchown16, sys_brk, sys_nis_syscall, sys_lseek
 /*20*/	.long sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
 /*25*/	.long sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_pause
 /*30*/	.long sys_utime, sys_lchown, sys_fchown, sys_access, sys_nice
@@ -67,7 +67,7 @@ sys_call_table:
 /*235*/	.long sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall
 /*240*/	.long sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler
 /*245*/	.long sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep
-/*250*/	.long sparc_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
+/*250*/	.long sys_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
 /*255*/	.long sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep
 /*260*/	.long sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun
 /*265*/	.long sys_timer_delete, sys_timer_create, sys_nis_syscall, sys_io_setup, sys_io_destroy
@@ -82,5 +82,5 @@ sys_call_table:
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 /*315*/	.long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open
+/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg
 
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 009825f6e73c..e575b46bd7a9 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -21,7 +21,7 @@ sys_call_table32:
 /*0*/	.word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write
 /*5*/	.word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link
 /*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod
-/*15*/	.word sys_chmod, sys_lchown16, sys_sparc_brk, sys32_perfctr, sys32_lseek
+/*15*/	.word sys_chmod, sys_lchown16, sys_brk, sys32_perfctr, sys32_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
 /*25*/	.word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys_pause
 /*30*/	.word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
@@ -68,7 +68,7 @@ sys_call_table32:
 	.word compat_sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys32_mlockall
 /*240*/	.word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler
 	.word sys_sched_yield, sys32_sched_get_priority_max, sys32_sched_get_priority_min, sys32_sched_rr_get_interval, compat_sys_nanosleep
-/*250*/	.word sys32_mremap, sys32_sysctl, sys32_getsid, sys_fdatasync, sys32_nfsservctl
+/*250*/	.word sys_mremap, compat_sys_sysctl, sys32_getsid, sys_fdatasync, sys32_nfsservctl
 	.word sys32_sync_file_range, compat_sys_clock_settime, compat_sys_clock_gettime, compat_sys_clock_getres, sys32_clock_nanosleep
 /*260*/	.word compat_sys_sched_getaffinity, compat_sys_sched_setaffinity, sys32_timer_settime, compat_sys_timer_gettime, sys_timer_getoverrun
 	.word sys_timer_delete, compat_sys_timer_create, sys_ni_syscall, compat_sys_io_setup, sys_io_destroy
@@ -83,7 +83,7 @@ sys_call_table32:
 /*310*/	.word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
 	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
-	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open
+	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg
 
 #endif /* CONFIG_COMPAT */
 
@@ -96,7 +96,7 @@ sys_call_table:
 /*0*/	.word sys_restart_syscall, sparc_exit, sys_fork, sys_read, sys_write
 /*5*/	.word sys_open, sys_close, sys_wait4, sys_creat, sys_link
 /*10*/  .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod
-/*15*/	.word sys_chmod, sys_lchown, sys_sparc_brk, sys_perfctr, sys_lseek
+/*15*/	.word sys_chmod, sys_lchown, sys_brk, sys_perfctr, sys_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid
 /*25*/	.word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall
 /*30*/	.word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice
@@ -158,4 +158,4 @@ sys_call_table:
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 	.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open
+	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg
diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c
index 614ac7b4a9dd..5b2f595fe65b 100644
--- a/arch/sparc/kernel/time_32.c
+++ b/arch/sparc/kernel/time_32.c
@@ -210,9 +210,6 @@ static void __init sbus_time_init(void)
 	btfixup();
 
 	sparc_init_timers(timer_interrupt);
-	
-	/* Now that OBP ticker has been silenced, it is safe to enable IRQ. */
-	local_irq_enable();
 }
 
 void __init time_init(void)
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index da1218e8ee87..63f73ae8a892 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -847,7 +847,7 @@ void __init time_init(void)
 	sparc64_clockevent.min_delta_ns =
 		clockevent_delta2ns(0xF, &sparc64_clockevent);
 
-	printk("clockevent: mult[%lx] shift[%d]\n",
+	printk("clockevent: mult[%ux] shift[%d]\n",
 	       sparc64_clockevent.mult, sparc64_clockevent.shift);
 
 	setup_sparc64_timer();
diff --git a/arch/sparc/kernel/trampoline_32.S b/arch/sparc/kernel/trampoline_32.S
index 5e235c52d667..691f484e03b3 100644
--- a/arch/sparc/kernel/trampoline_32.S
+++ b/arch/sparc/kernel/trampoline_32.S
@@ -15,7 +15,7 @@
 #include <asm/contregs.h>
 #include <asm/thread_info.h>
 
-	.globl sun4m_cpu_startup, __smp4m_processor_id
+	.globl sun4m_cpu_startup, __smp4m_processor_id, __leon_processor_id
 	.globl sun4d_cpu_startup, __smp4d_processor_id
 
 	__CPUINIT
@@ -106,6 +106,12 @@ __smp4d_processor_id:
 	retl
 	 mov	%g1, %o7
 
+__leon_processor_id:
+	rd     %asr17,%g2
+        srl    %g2,28,%g2
+	retl
+	 mov	%g1, %o7
+
 /* CPUID in bootbus can be found at PA 0xff0140000 */
 #define SUN4D_BOOTBUS_CPUID	0xf0140000
 
@@ -160,3 +166,64 @@ sun4d_cpu_startup:
 	 nop
 
 	b,a	smp_do_cpu_idle
+
+#ifdef CONFIG_SPARC_LEON
+
+	__CPUINIT
+	.align	4
+        .global leon_smp_cpu_startup, smp_penguin_ctable
+
+leon_smp_cpu_startup:
+
+        set smp_penguin_ctable,%g1
+        ld [%g1+4],%g1
+        srl %g1,4,%g1
+        set 0x00000100,%g5 /* SRMMU_CTXTBL_PTR */
+	sta %g1, [%g5] ASI_M_MMUREGS
+
+	/* Set up a sane %psr -- PIL<0xf> S<0x1> PS<0x1> CWP<0x0> */
+	set	(PSR_PIL | PSR_S | PSR_PS), %g1
+	wr	%g1, 0x0, %psr		! traps off though
+	WRITE_PAUSE
+
+	/* Our %wim is one behind CWP */
+	mov	2, %g1
+	wr	%g1, 0x0, %wim
+	WRITE_PAUSE
+
+	/* Set tbr - we use just one trap table. */
+	set	trapbase, %g1
+	wr	%g1, 0x0, %tbr
+	WRITE_PAUSE
+
+	/* Get our CPU id */
+        rd     %asr17,%g3
+
+	/* Give ourselves a stack and curptr. */
+	set	current_set, %g5
+	srl	%g3, 28, %g4
+	sll	%g4, 2, %g4
+	ld	[%g5 + %g4], %g6
+
+	sethi	%hi(THREAD_SIZE - STACKFRAME_SZ), %sp
+	or	%sp, %lo(THREAD_SIZE - STACKFRAME_SZ), %sp
+	add	%g6, %sp, %sp
+
+	/* Turn on traps (PSR_ET). */
+	rd	%psr, %g1
+	wr	%g1, PSR_ET, %psr	! traps on
+	WRITE_PAUSE
+
+	/* Init our caches, etc. */
+	set	poke_srmmu, %g5
+	ld	[%g5], %g5
+	call	%g5
+	 nop
+
+	/* Start this processor. */
+	call	leon_callin
+	 nop
+
+	b,a	smp_do_cpu_idle
+
+#endif
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 509b1ffeba66..367321a030dd 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -1990,7 +1990,7 @@ void __init poke_leonsparc(void)
 void __init init_leon(void)
 {
 
-	srmmu_name = "Leon";
+	srmmu_name = "LEON";
 
 	BTFIXUPSET_CALL(flush_cache_all, leon_flush_cache_all,
 			BTFIXUPCALL_NORM);
@@ -2037,8 +2037,6 @@ static void __init get_srmmu_type(void)
 
 	/* First, check for sparc-leon. */
 	if (sparc_cpu_model == sparc_leon) {
-		psr_typ = 0xf;	/* hardcoded ids for older models/simulators */
-		psr_vers = 2;
 		init_leon();
 		return;
 	}
@@ -2301,7 +2299,8 @@ void __init ld_mmu_srmmu(void)
 	BTFIXUPSET_CALL(flush_cache_mm, smp_flush_cache_mm, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(flush_cache_range, smp_flush_cache_range, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(flush_cache_page, smp_flush_cache_page, BTFIXUPCALL_NORM);
-	if (sparc_cpu_model != sun4d) {
+	if (sparc_cpu_model != sun4d &&
+	    sparc_cpu_model != sparc_leon) {
 		BTFIXUPSET_CALL(flush_tlb_all, smp_flush_tlb_all, BTFIXUPCALL_NORM);
 		BTFIXUPSET_CALL(flush_tlb_mm, smp_flush_tlb_mm, BTFIXUPCALL_NORM);
 		BTFIXUPSET_CALL(flush_tlb_range, smp_flush_tlb_range, BTFIXUPCALL_NORM);
@@ -2330,6 +2329,8 @@ void __init ld_mmu_srmmu(void)
 #ifdef CONFIG_SMP
 	if (sparc_cpu_model == sun4d)
 		sun4d_init_smp();
+	else if (sparc_cpu_model == sparc_leon)
+		leon_init_smp();
 	else
 		sun4m_init_smp();
 #endif
diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c
index eb240323c40a..d22f9e5c0eac 100644
--- a/arch/um/drivers/mmapper_kern.c
+++ b/arch/um/drivers/mmapper_kern.c
@@ -16,7 +16,7 @@
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/mm.h>
-#include <linux/smp_lock.h>
+
 #include <asm/uaccess.h>
 #include "mem_user.h"
 
@@ -78,7 +78,6 @@ out:
 
 static int mmapper_open(struct inode *inode, struct file *file)
 {
-	cycle_kernel_lock();
 	return 0;
 }
 
@@ -115,18 +114,16 @@ static int __init mmapper_init(void)
 	v_buf = (char *) find_iomem("mmapper", &mmapper_size);
 	if (mmapper_size == 0) {
 		printk(KERN_ERR "mmapper_init - find_iomem failed\n");
-		goto out;
+		return -ENODEV;
 	}
+	p_buf = __pa(v_buf);
 
 	err = misc_register(&mmapper_dev);
 	if (err) {
 		printk(KERN_ERR "mmapper - misc_register failed, err = %d\n",
 		       err);
-		goto out;
+		return err;;
 	}
-
-	p_buf = __pa(v_buf);
-out:
 	return 0;
 }
 
diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c
index 6eabb7022a2d..4949044773ba 100644
--- a/arch/um/drivers/random.c
+++ b/arch/um/drivers/random.c
@@ -7,7 +7,6 @@
  * of the GNU General Public License, incorporated herein by reference.
  */
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
@@ -34,8 +33,6 @@ static DECLARE_WAIT_QUEUE_HEAD(host_read_wait);
 
 static int rng_dev_open (struct inode *inode, struct file *filp)
 {
-	cycle_kernel_lock();
-
 	/* enforce read-only access to this chrdev */
 	if ((filp->f_mode & FMODE_READ) == 0)
 		return -EINVAL;
diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c
index a4625c7b2bf9..cccab850c27e 100644
--- a/arch/um/kernel/syscall.c
+++ b/arch/um/kernel/syscall.c
@@ -8,6 +8,7 @@
 #include "linux/mm.h"
 #include "linux/sched.h"
 #include "linux/utsname.h"
+#include "linux/syscalls.h"
 #include "asm/current.h"
 #include "asm/mman.h"
 #include "asm/uaccess.h"
@@ -37,31 +38,6 @@ long sys_vfork(void)
 	return ret;
 }
 
-/* common code for old and new mmaps */
-long sys_mmap2(unsigned long addr, unsigned long len,
-	       unsigned long prot, unsigned long flags,
-	       unsigned long fd, unsigned long pgoff)
-{
-	long error = -EBADF;
-	struct file * file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
- out:
-	return error;
-}
-
 long old_mmap(unsigned long addr, unsigned long len,
 	      unsigned long prot, unsigned long flags,
 	      unsigned long fd, unsigned long offset)
@@ -70,7 +46,7 @@ long old_mmap(unsigned long addr, unsigned long len,
 	if (offset & ~PAGE_MASK)
 		goto out;
 
-	err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+	err = sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
  out:
 	return err;
 }
diff --git a/arch/um/sys-i386/shared/sysdep/syscalls.h b/arch/um/sys-i386/shared/sysdep/syscalls.h
index 905698197e35..e7787679e317 100644
--- a/arch/um/sys-i386/shared/sysdep/syscalls.h
+++ b/arch/um/sys-i386/shared/sysdep/syscalls.h
@@ -20,7 +20,3 @@ extern syscall_handler_t *sys_call_table[];
 #define EXECUTE_SYSCALL(syscall, regs) \
 	((long (*)(struct syscall_args)) \
 	 (*sys_call_table[syscall]))(SYSCALL_ARGS(&regs->regs))
-
-extern long sys_mmap2(unsigned long addr, unsigned long len,
-		      unsigned long prot, unsigned long flags,
-		      unsigned long fd, unsigned long pgoff);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 72ace9515a07..32a1918e1b88 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -49,7 +49,9 @@ config X86
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
+	select HAVE_HW_BREAKPOINT
 	select HAVE_ARCH_KMEMCHECK
+	select HAVE_USER_RETURN_NOTIFIER
 
 config OUTPUT_FORMAT
 	string
@@ -1330,7 +1332,9 @@ config MATH_EMULATION
 	  kernel, it won't hurt.
 
 config MTRR
-	bool "MTRR (Memory Type Range Register) support"
+	bool
+	default y
+	prompt "MTRR (Memory Type Range Register) support" if EMBEDDED
 	---help---
 	  On Intel P6 family processors (Pentium Pro, Pentium II and later)
 	  the Memory Type Range Registers (MTRRs) may be used to control
@@ -1396,7 +1400,8 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
 
 config X86_PAT
 	bool
-	prompt "x86 PAT support"
+	default y
+	prompt "x86 PAT support" if EMBEDDED
 	depends on MTRR
 	---help---
 	  Use PAT attributes to setup page level cache control.
@@ -1602,7 +1607,7 @@ config COMPAT_VDSO
 	depends on X86_32 || IA32_EMULATION
 	---help---
 	  Map the 32-bit VDSO to the predictable old-style address too.
-	---help---
+
 	  Say N here if you are running a sufficiently recent glibc
 	  version (2.3.3 or later), to remove the high-mapped
 	  VDSO mapping and to exclusively use the randomized VDSO.
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 2649840d888f..08e442bc3ab9 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -301,15 +301,11 @@ config X86_CPU
 
 #
 # Define implied options from the CPU selection here
-config X86_L1_CACHE_BYTES
+config X86_INTERNODE_CACHE_SHIFT
 	int
-	default "128" if MPSC
-	default "64" if GENERIC_CPU || MK8 || MCORE2 || MATOM || X86_32
-
-config X86_INTERNODE_CACHE_BYTES
-	int
-	default "4096" if X86_VSMP
-	default X86_L1_CACHE_BYTES if !X86_VSMP
+	default "12" if X86_VSMP
+	default "7" if NUMA
+	default X86_L1_CACHE_SHIFT
 
 config X86_CMPXCHG
 	def_bool X86_64 || (X86_32 && !M386)
@@ -317,9 +313,9 @@ config X86_CMPXCHG
 config X86_L1_CACHE_SHIFT
 	int
 	default "7" if MPENTIUM4 || MPSC
+	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU
 	default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
 	default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
-	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU
 
 config X86_XADD
 	def_bool y
@@ -406,7 +402,7 @@ config X86_CMPXCHG64
 # generates cmov.
 config X86_CMOV
 	def_bool y
-	depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM)
+	depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM || MGEODE_LX)
 
 config X86_MINIMUM_CPU_FAMILY
 	int
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index d105f29bb6bb..bc01e3ebfeb2 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -186,6 +186,15 @@ config X86_DS_SELFTEST
 config HAVE_MMIOTRACE_SUPPORT
 	def_bool y
 
+config X86_DECODER_SELFTEST
+	bool "x86 instruction decoder selftest"
+	depends on DEBUG_KERNEL && KPROBES
+	---help---
+	 Perform x86 instruction decoder selftests at build time.
+	 This option is useful for checking the sanity of x86 instruction
+	 decoder code.
+	 If unsure, say "N".
+
 #
 # IO delay types:
 #
@@ -287,4 +296,18 @@ config OPTIMIZE_INLINING
 
 	  If unsure, say N.
 
+config DEBUG_STRICT_USER_COPY_CHECKS
+	bool "Strict copy size checks"
+	depends on DEBUG_KERNEL && !TRACE_BRANCH_PROFILING
+	---help---
+	  Enabling this option turns a certain set of sanity checks for user
+	  copy operations into compile time failures.
+
+	  The copy_from_user() etc checks are there to help test if there
+	  are sufficient security checks on the length argument of
+	  the copy operation, by having gcc prove that the argument is
+	  within bounds.
+
+	  If unsure, or if you run an older (pre 4.4) gcc, say N.
+
 endmenu
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index d2d24c9ee64d..78b32be55e9e 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -155,6 +155,9 @@ all: bzImage
 KBUILD_IMAGE := $(boot)/bzImage
 
 bzImage: vmlinux
+ifeq ($(CONFIG_X86_DECODER_SELFTEST),y)
+	$(Q)$(MAKE) $(build)=arch/x86/tools posttest
+endif
 	$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
 	$(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot
 	$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@
diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu
index 30e9a264f69d..1255d953c65d 100644
--- a/arch/x86/Makefile_32.cpu
+++ b/arch/x86/Makefile_32.cpu
@@ -41,11 +41,18 @@ cflags-$(CONFIG_X86_ELAN)	+= -march=i486
 
 # Geode GX1 support
 cflags-$(CONFIG_MGEODEGX1)	+= -march=pentium-mmx
-
+cflags-$(CONFIG_MGEODE_LX)	+= $(call cc-option,-march=geode,-march=pentium-mmx)
 # add at the end to overwrite eventual tuning options from earlier
 # cpu entries
 cflags-$(CONFIG_X86_GENERIC) 	+= $(call tune,generic,$(call tune,i686))
 
+# Work around the pentium-mmx code generator madness of gcc4.4.x which
+# does stack alignment by generating horrible code _before_ the mcount
+# prologue (push %ebp, mov %esp, %ebp) which breaks the function graph
+# tracer assumptions. For i686, generic, core2 this is set by the
+# compiler anyway
+cflags-$(CONFIG_FUNCTION_GRAPH_TRACER) += $(call cc-option,-maccumulate-outgoing-args)
+
 # Bug fix for binutils: this option is required in order to keep
 # binutils from generating NOPL instructions against our will.
 ifneq ($(CONFIG_X86_P6_NOP),y)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 077e1b69198e..faff0dc9c06a 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -107,8 +107,7 @@ ENTRY(startup_32)
 	lgdt	gdt(%ebp)
 
 	/* Enable PAE mode */
-	xorl	%eax, %eax
-	orl	$(X86_CR4_PAE), %eax
+	movl	$(X86_CR4_PAE), %eax
 	movl	%eax, %cr4
 
  /*
diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S
index f4193bb48782..a6f1a59a5b0c 100644
--- a/arch/x86/boot/compressed/vmlinux.lds.S
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -4,6 +4,7 @@ OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
 
 #undef i386
 
+#include <asm/cache.h>
 #include <asm/page_types.h>
 
 #ifdef CONFIG_X86_64
@@ -46,7 +47,7 @@ SECTIONS
 		*(.data.*)
 		_edata = . ;
 	}
-	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+	. = ALIGN(L1_CACHE_BYTES);
 	.bss : {
 		_bss = . ;
 		*(.bss)
diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c
index d42da3802499..f767164cd5df 100644
--- a/arch/x86/boot/video.c
+++ b/arch/x86/boot/video.c
@@ -27,6 +27,12 @@ static void store_cursor_position(void)
 
 	boot_params.screen_info.orig_x = oreg.dl;
 	boot_params.screen_info.orig_y = oreg.dh;
+
+	if (oreg.ch & 0x20)
+		boot_params.screen_info.flags |= VIDEO_FLAGS_NOCURSOR;
+
+	if ((oreg.ch & 0x1f) > (oreg.cl & 0x1f))
+		boot_params.screen_info.flags |= VIDEO_FLAGS_NOCURSOR;
 }
 
 static void store_video_mode(void)
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index cfb0010fa940..1a58ad89fdf7 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o
 obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o
 obj-$(CONFIG_CRYPTO_SALSA20_X86_64) += salsa20-x86_64.o
 obj-$(CONFIG_CRYPTO_AES_NI_INTEL) += aesni-intel.o
+obj-$(CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL) += ghash-clmulni-intel.o
 
 obj-$(CONFIG_CRYPTO_CRC32C_INTEL) += crc32c-intel.o
 
@@ -24,3 +25,5 @@ twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o
 salsa20-x86_64-y := salsa20-x86_64-asm_64.o salsa20_glue.o
 
 aesni-intel-y := aesni-intel_asm.o aesni-intel_glue.o
+
+ghash-clmulni-intel-y := ghash-clmulni-intel_asm.o ghash-clmulni-intel_glue.o
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index eb0566e83319..20bb0e1ac681 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -16,6 +16,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/inst.h>
 
 .text
 
@@ -122,103 +123,72 @@ ENTRY(aesni_set_key)
 	movups 0x10(%rsi), %xmm2	# other user key
 	movaps %xmm2, (%rcx)
 	add $0x10, %rcx
-	# aeskeygenassist $0x1, %xmm2, %xmm1	# round 1
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x01
+	AESKEYGENASSIST 0x1 %xmm2 %xmm1		# round 1
 	call _key_expansion_256a
-	# aeskeygenassist $0x1, %xmm0, %xmm1
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x01
+	AESKEYGENASSIST 0x1 %xmm0 %xmm1
 	call _key_expansion_256b
-	# aeskeygenassist $0x2, %xmm2, %xmm1	# round 2
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x02
+	AESKEYGENASSIST 0x2 %xmm2 %xmm1		# round 2
 	call _key_expansion_256a
-	# aeskeygenassist $0x2, %xmm0, %xmm1
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x02
+	AESKEYGENASSIST 0x2 %xmm0 %xmm1
 	call _key_expansion_256b
-	# aeskeygenassist $0x4, %xmm2, %xmm1	# round 3
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x04
+	AESKEYGENASSIST 0x4 %xmm2 %xmm1		# round 3
 	call _key_expansion_256a
-	# aeskeygenassist $0x4, %xmm0, %xmm1
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x04
+	AESKEYGENASSIST 0x4 %xmm0 %xmm1
 	call _key_expansion_256b
-	# aeskeygenassist $0x8, %xmm2, %xmm1	# round 4
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x08
+	AESKEYGENASSIST 0x8 %xmm2 %xmm1		# round 4
 	call _key_expansion_256a
-	# aeskeygenassist $0x8, %xmm0, %xmm1
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x08
+	AESKEYGENASSIST 0x8 %xmm0 %xmm1
 	call _key_expansion_256b
-	# aeskeygenassist $0x10, %xmm2, %xmm1	# round 5
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x10
+	AESKEYGENASSIST 0x10 %xmm2 %xmm1	# round 5
 	call _key_expansion_256a
-	# aeskeygenassist $0x10, %xmm0, %xmm1
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x10
+	AESKEYGENASSIST 0x10 %xmm0 %xmm1
 	call _key_expansion_256b
-	# aeskeygenassist $0x20, %xmm2, %xmm1	# round 6
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x20
+	AESKEYGENASSIST 0x20 %xmm2 %xmm1	# round 6
 	call _key_expansion_256a
-	# aeskeygenassist $0x20, %xmm0, %xmm1
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x20
+	AESKEYGENASSIST 0x20 %xmm0 %xmm1
 	call _key_expansion_256b
-	# aeskeygenassist $0x40, %xmm2, %xmm1	# round 7
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x40
+	AESKEYGENASSIST 0x40 %xmm2 %xmm1	# round 7
 	call _key_expansion_256a
 	jmp .Ldec_key
 .Lenc_key192:
 	movq 0x10(%rsi), %xmm2		# other user key
-	# aeskeygenassist $0x1, %xmm2, %xmm1	# round 1
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x01
+	AESKEYGENASSIST 0x1 %xmm2 %xmm1		# round 1
 	call _key_expansion_192a
-	# aeskeygenassist $0x2, %xmm2, %xmm1	# round 2
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x02
+	AESKEYGENASSIST 0x2 %xmm2 %xmm1		# round 2
 	call _key_expansion_192b
-	# aeskeygenassist $0x4, %xmm2, %xmm1	# round 3
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x04
+	AESKEYGENASSIST 0x4 %xmm2 %xmm1		# round 3
 	call _key_expansion_192a
-	# aeskeygenassist $0x8, %xmm2, %xmm1	# round 4
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x08
+	AESKEYGENASSIST 0x8 %xmm2 %xmm1		# round 4
 	call _key_expansion_192b
-	# aeskeygenassist $0x10, %xmm2, %xmm1	# round 5
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x10
+	AESKEYGENASSIST 0x10 %xmm2 %xmm1	# round 5
 	call _key_expansion_192a
-	# aeskeygenassist $0x20, %xmm2, %xmm1	# round 6
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x20
+	AESKEYGENASSIST 0x20 %xmm2 %xmm1	# round 6
 	call _key_expansion_192b
-	# aeskeygenassist $0x40, %xmm2, %xmm1	# round 7
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x40
+	AESKEYGENASSIST 0x40 %xmm2 %xmm1	# round 7
 	call _key_expansion_192a
-	# aeskeygenassist $0x80, %xmm2, %xmm1	# round 8
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xca, 0x80
+	AESKEYGENASSIST 0x80 %xmm2 %xmm1	# round 8
 	call _key_expansion_192b
 	jmp .Ldec_key
 .Lenc_key128:
-	# aeskeygenassist $0x1, %xmm0, %xmm1	# round 1
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x01
+	AESKEYGENASSIST 0x1 %xmm0 %xmm1		# round 1
 	call _key_expansion_128
-	# aeskeygenassist $0x2, %xmm0, %xmm1	# round 2
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x02
+	AESKEYGENASSIST 0x2 %xmm0 %xmm1		# round 2
 	call _key_expansion_128
-	# aeskeygenassist $0x4, %xmm0, %xmm1	# round 3
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x04
+	AESKEYGENASSIST 0x4 %xmm0 %xmm1		# round 3
 	call _key_expansion_128
-	# aeskeygenassist $0x8, %xmm0, %xmm1	# round 4
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x08
+	AESKEYGENASSIST 0x8 %xmm0 %xmm1		# round 4
 	call _key_expansion_128
-	# aeskeygenassist $0x10, %xmm0, %xmm1	# round 5
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x10
+	AESKEYGENASSIST 0x10 %xmm0 %xmm1	# round 5
 	call _key_expansion_128
-	# aeskeygenassist $0x20, %xmm0, %xmm1	# round 6
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x20
+	AESKEYGENASSIST 0x20 %xmm0 %xmm1	# round 6
 	call _key_expansion_128
-	# aeskeygenassist $0x40, %xmm0, %xmm1	# round 7
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x40
+	AESKEYGENASSIST 0x40 %xmm0 %xmm1	# round 7
 	call _key_expansion_128
-	# aeskeygenassist $0x80, %xmm0, %xmm1	# round 8
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x80
+	AESKEYGENASSIST 0x80 %xmm0 %xmm1	# round 8
 	call _key_expansion_128
-	# aeskeygenassist $0x1b, %xmm0, %xmm1	# round 9
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x1b
+	AESKEYGENASSIST 0x1b %xmm0 %xmm1	# round 9
 	call _key_expansion_128
-	# aeskeygenassist $0x36, %xmm0, %xmm1	# round 10
-	.byte 0x66, 0x0f, 0x3a, 0xdf, 0xc8, 0x36
+	AESKEYGENASSIST 0x36 %xmm0 %xmm1	# round 10
 	call _key_expansion_128
 .Ldec_key:
 	sub $0x10, %rcx
@@ -231,8 +201,7 @@ ENTRY(aesni_set_key)
 .align 4
 .Ldec_key_loop:
 	movaps (%rdi), %xmm0
-	# aesimc %xmm0, %xmm1
-	.byte 0x66, 0x0f, 0x38, 0xdb, 0xc8
+	AESIMC %xmm0 %xmm1
 	movaps %xmm1, (%rsi)
 	add $0x10, %rdi
 	sub $0x10, %rsi
@@ -274,51 +243,37 @@ _aesni_enc1:
 	je .Lenc192
 	add $0x20, TKEYP
 	movaps -0x60(TKEYP), KEY
-	# aesenc KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	AESENC KEY STATE
 	movaps -0x50(TKEYP), KEY
-	# aesenc KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	AESENC KEY STATE
 .align 4
 .Lenc192:
 	movaps -0x40(TKEYP), KEY
-	# aesenc KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	AESENC KEY STATE
 	movaps -0x30(TKEYP), KEY
-	# aesenc KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	AESENC KEY STATE
 .align 4
 .Lenc128:
 	movaps -0x20(TKEYP), KEY
-	# aesenc KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	AESENC KEY STATE
 	movaps -0x10(TKEYP), KEY
-	# aesenc KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	AESENC KEY STATE
 	movaps (TKEYP), KEY
-	# aesenc KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	AESENC KEY STATE
 	movaps 0x10(TKEYP), KEY
-	# aesenc KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	AESENC KEY STATE
 	movaps 0x20(TKEYP), KEY
-	# aesenc KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	AESENC KEY STATE
 	movaps 0x30(TKEYP), KEY
-	# aesenc KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	AESENC KEY STATE
 	movaps 0x40(TKEYP), KEY
-	# aesenc KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	AESENC KEY STATE
 	movaps 0x50(TKEYP), KEY
-	# aesenc KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	AESENC KEY STATE
 	movaps 0x60(TKEYP), KEY
-	# aesenc KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
+	AESENC KEY STATE
 	movaps 0x70(TKEYP), KEY
-	# aesenclast KEY, STATE	# last round
-	.byte 0x66, 0x0f, 0x38, 0xdd, 0xc2
+	AESENCLAST KEY STATE
 	ret
 
 /*
@@ -353,135 +308,79 @@ _aesni_enc4:
 	je .L4enc192
 	add $0x20, TKEYP
 	movaps -0x60(TKEYP), KEY
-	# aesenc KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
-	# aesenc KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
-	# aesenc KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
-	# aesenc KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	AESENC KEY STATE1
+	AESENC KEY STATE2
+	AESENC KEY STATE3
+	AESENC KEY STATE4
 	movaps -0x50(TKEYP), KEY
-	# aesenc KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
-	# aesenc KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
-	# aesenc KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
-	# aesenc KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	AESENC KEY STATE1
+	AESENC KEY STATE2
+	AESENC KEY STATE3
+	AESENC KEY STATE4
 #.align 4
 .L4enc192:
 	movaps -0x40(TKEYP), KEY
-	# aesenc KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
-	# aesenc KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
-	# aesenc KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
-	# aesenc KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	AESENC KEY STATE1
+	AESENC KEY STATE2
+	AESENC KEY STATE3
+	AESENC KEY STATE4
 	movaps -0x30(TKEYP), KEY
-	# aesenc KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
-	# aesenc KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
-	# aesenc KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
-	# aesenc KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	AESENC KEY STATE1
+	AESENC KEY STATE2
+	AESENC KEY STATE3
+	AESENC KEY STATE4
 #.align 4
 .L4enc128:
 	movaps -0x20(TKEYP), KEY
-	# aesenc KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
-	# aesenc KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
-	# aesenc KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
-	# aesenc KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	AESENC KEY STATE1
+	AESENC KEY STATE2
+	AESENC KEY STATE3
+	AESENC KEY STATE4
 	movaps -0x10(TKEYP), KEY
-	# aesenc KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
-	# aesenc KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
-	# aesenc KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
-	# aesenc KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	AESENC KEY STATE1
+	AESENC KEY STATE2
+	AESENC KEY STATE3
+	AESENC KEY STATE4
 	movaps (TKEYP), KEY
-	# aesenc KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
-	# aesenc KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
-	# aesenc KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
-	# aesenc KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	AESENC KEY STATE1
+	AESENC KEY STATE2
+	AESENC KEY STATE3
+	AESENC KEY STATE4
 	movaps 0x10(TKEYP), KEY
-	# aesenc KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
-	# aesenc KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
-	# aesenc KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
-	# aesenc KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	AESENC KEY STATE1
+	AESENC KEY STATE2
+	AESENC KEY STATE3
+	AESENC KEY STATE4
 	movaps 0x20(TKEYP), KEY
-	# aesenc KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
-	# aesenc KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
-	# aesenc KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
-	# aesenc KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	AESENC KEY STATE1
+	AESENC KEY STATE2
+	AESENC KEY STATE3
+	AESENC KEY STATE4
 	movaps 0x30(TKEYP), KEY
-	# aesenc KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
-	# aesenc KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
-	# aesenc KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
-	# aesenc KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	AESENC KEY STATE1
+	AESENC KEY STATE2
+	AESENC KEY STATE3
+	AESENC KEY STATE4
 	movaps 0x40(TKEYP), KEY
-	# aesenc KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
-	# aesenc KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
-	# aesenc KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
-	# aesenc KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	AESENC KEY STATE1
+	AESENC KEY STATE2
+	AESENC KEY STATE3
+	AESENC KEY STATE4
 	movaps 0x50(TKEYP), KEY
-	# aesenc KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
-	# aesenc KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
-	# aesenc KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
-	# aesenc KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	AESENC KEY STATE1
+	AESENC KEY STATE2
+	AESENC KEY STATE3
+	AESENC KEY STATE4
 	movaps 0x60(TKEYP), KEY
-	# aesenc KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xc2
-	# aesenc KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xe2
-	# aesenc KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xea
-	# aesenc KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdc, 0xf2
+	AESENC KEY STATE1
+	AESENC KEY STATE2
+	AESENC KEY STATE3
+	AESENC KEY STATE4
 	movaps 0x70(TKEYP), KEY
-	# aesenclast KEY, STATE1	# last round
-	.byte 0x66, 0x0f, 0x38, 0xdd, 0xc2
-	# aesenclast KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdd, 0xe2
-	# aesenclast KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdd, 0xea
-	# aesenclast KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdd, 0xf2
+	AESENCLAST KEY STATE1		# last round
+	AESENCLAST KEY STATE2
+	AESENCLAST KEY STATE3
+	AESENCLAST KEY STATE4
 	ret
 
 /*
@@ -518,51 +417,37 @@ _aesni_dec1:
 	je .Ldec192
 	add $0x20, TKEYP
 	movaps -0x60(TKEYP), KEY
-	# aesdec KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	AESDEC KEY STATE
 	movaps -0x50(TKEYP), KEY
-	# aesdec KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	AESDEC KEY STATE
 .align 4
 .Ldec192:
 	movaps -0x40(TKEYP), KEY
-	# aesdec KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	AESDEC KEY STATE
 	movaps -0x30(TKEYP), KEY
-	# aesdec KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	AESDEC KEY STATE
 .align 4
 .Ldec128:
 	movaps -0x20(TKEYP), KEY
-	# aesdec KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	AESDEC KEY STATE
 	movaps -0x10(TKEYP), KEY
-	# aesdec KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	AESDEC KEY STATE
 	movaps (TKEYP), KEY
-	# aesdec KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	AESDEC KEY STATE
 	movaps 0x10(TKEYP), KEY
-	# aesdec KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	AESDEC KEY STATE
 	movaps 0x20(TKEYP), KEY
-	# aesdec KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	AESDEC KEY STATE
 	movaps 0x30(TKEYP), KEY
-	# aesdec KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	AESDEC KEY STATE
 	movaps 0x40(TKEYP), KEY
-	# aesdec KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	AESDEC KEY STATE
 	movaps 0x50(TKEYP), KEY
-	# aesdec KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	AESDEC KEY STATE
 	movaps 0x60(TKEYP), KEY
-	# aesdec KEY, STATE
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
+	AESDEC KEY STATE
 	movaps 0x70(TKEYP), KEY
-	# aesdeclast KEY, STATE		# last round
-	.byte 0x66, 0x0f, 0x38, 0xdf, 0xc2
+	AESDECLAST KEY STATE
 	ret
 
 /*
@@ -597,135 +482,79 @@ _aesni_dec4:
 	je .L4dec192
 	add $0x20, TKEYP
 	movaps -0x60(TKEYP), KEY
-	# aesdec KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
-	# aesdec KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
-	# aesdec KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
-	# aesdec KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	AESDEC KEY STATE1
+	AESDEC KEY STATE2
+	AESDEC KEY STATE3
+	AESDEC KEY STATE4
 	movaps -0x50(TKEYP), KEY
-	# aesdec KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
-	# aesdec KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
-	# aesdec KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
-	# aesdec KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	AESDEC KEY STATE1
+	AESDEC KEY STATE2
+	AESDEC KEY STATE3
+	AESDEC KEY STATE4
 .align 4
 .L4dec192:
 	movaps -0x40(TKEYP), KEY
-	# aesdec KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
-	# aesdec KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
-	# aesdec KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
-	# aesdec KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	AESDEC KEY STATE1
+	AESDEC KEY STATE2
+	AESDEC KEY STATE3
+	AESDEC KEY STATE4
 	movaps -0x30(TKEYP), KEY
-	# aesdec KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
-	# aesdec KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
-	# aesdec KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
-	# aesdec KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	AESDEC KEY STATE1
+	AESDEC KEY STATE2
+	AESDEC KEY STATE3
+	AESDEC KEY STATE4
 .align 4
 .L4dec128:
 	movaps -0x20(TKEYP), KEY
-	# aesdec KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
-	# aesdec KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
-	# aesdec KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
-	# aesdec KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	AESDEC KEY STATE1
+	AESDEC KEY STATE2
+	AESDEC KEY STATE3
+	AESDEC KEY STATE4
 	movaps -0x10(TKEYP), KEY
-	# aesdec KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
-	# aesdec KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
-	# aesdec KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
-	# aesdec KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	AESDEC KEY STATE1
+	AESDEC KEY STATE2
+	AESDEC KEY STATE3
+	AESDEC KEY STATE4
 	movaps (TKEYP), KEY
-	# aesdec KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
-	# aesdec KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
-	# aesdec KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
-	# aesdec KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	AESDEC KEY STATE1
+	AESDEC KEY STATE2
+	AESDEC KEY STATE3
+	AESDEC KEY STATE4
 	movaps 0x10(TKEYP), KEY
-	# aesdec KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
-	# aesdec KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
-	# aesdec KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
-	# aesdec KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	AESDEC KEY STATE1
+	AESDEC KEY STATE2
+	AESDEC KEY STATE3
+	AESDEC KEY STATE4
 	movaps 0x20(TKEYP), KEY
-	# aesdec KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
-	# aesdec KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
-	# aesdec KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
-	# aesdec KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	AESDEC KEY STATE1
+	AESDEC KEY STATE2
+	AESDEC KEY STATE3
+	AESDEC KEY STATE4
 	movaps 0x30(TKEYP), KEY
-	# aesdec KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
-	# aesdec KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
-	# aesdec KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
-	# aesdec KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	AESDEC KEY STATE1
+	AESDEC KEY STATE2
+	AESDEC KEY STATE3
+	AESDEC KEY STATE4
 	movaps 0x40(TKEYP), KEY
-	# aesdec KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
-	# aesdec KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
-	# aesdec KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
-	# aesdec KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	AESDEC KEY STATE1
+	AESDEC KEY STATE2
+	AESDEC KEY STATE3
+	AESDEC KEY STATE4
 	movaps 0x50(TKEYP), KEY
-	# aesdec KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
-	# aesdec KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
-	# aesdec KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
-	# aesdec KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	AESDEC KEY STATE1
+	AESDEC KEY STATE2
+	AESDEC KEY STATE3
+	AESDEC KEY STATE4
 	movaps 0x60(TKEYP), KEY
-	# aesdec KEY, STATE1
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xc2
-	# aesdec KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xe2
-	# aesdec KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xea
-	# aesdec KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xde, 0xf2
+	AESDEC KEY STATE1
+	AESDEC KEY STATE2
+	AESDEC KEY STATE3
+	AESDEC KEY STATE4
 	movaps 0x70(TKEYP), KEY
-	# aesdeclast KEY, STATE1	# last round
-	.byte 0x66, 0x0f, 0x38, 0xdf, 0xc2
-	# aesdeclast KEY, STATE2
-	.byte 0x66, 0x0f, 0x38, 0xdf, 0xe2
-	# aesdeclast KEY, STATE3
-	.byte 0x66, 0x0f, 0x38, 0xdf, 0xea
-	# aesdeclast KEY, STATE4
-	.byte 0x66, 0x0f, 0x38, 0xdf, 0xf2
+	AESDECLAST KEY STATE1		# last round
+	AESDECLAST KEY STATE2
+	AESDECLAST KEY STATE3
+	AESDECLAST KEY STATE4
 	ret
 
 /*
diff --git a/arch/x86/crypto/ghash-clmulni-intel_asm.S b/arch/x86/crypto/ghash-clmulni-intel_asm.S
new file mode 100644
index 000000000000..1eb7f90cb7b9
--- /dev/null
+++ b/arch/x86/crypto/ghash-clmulni-intel_asm.S
@@ -0,0 +1,157 @@
+/*
+ * Accelerated GHASH implementation with Intel PCLMULQDQ-NI
+ * instructions. This file contains accelerated part of ghash
+ * implementation. More information about PCLMULQDQ can be found at:
+ *
+ * http://software.intel.com/en-us/articles/carry-less-multiplication-and-its-usage-for-computing-the-gcm-mode/
+ *
+ * Copyright (c) 2009 Intel Corp.
+ *   Author: Huang Ying <ying.huang@intel.com>
+ *	     Vinodh Gopal
+ *	     Erdinc Ozturk
+ *	     Deniz Karakoyunlu
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/inst.h>
+
+.data
+
+.align 16
+.Lbswap_mask:
+	.octa 0x000102030405060708090a0b0c0d0e0f
+.Lpoly:
+	.octa 0xc2000000000000000000000000000001
+.Ltwo_one:
+	.octa 0x00000001000000000000000000000001
+
+#define DATA	%xmm0
+#define SHASH	%xmm1
+#define T1	%xmm2
+#define T2	%xmm3
+#define T3	%xmm4
+#define BSWAP	%xmm5
+#define IN1	%xmm6
+
+.text
+
+/*
+ * __clmul_gf128mul_ble:	internal ABI
+ * input:
+ *	DATA:			operand1
+ *	SHASH:			operand2, hash_key << 1 mod poly
+ * output:
+ *	DATA:			operand1 * operand2 mod poly
+ * changed:
+ *	T1
+ *	T2
+ *	T3
+ */
+__clmul_gf128mul_ble:
+	movaps DATA, T1
+	pshufd $0b01001110, DATA, T2
+	pshufd $0b01001110, SHASH, T3
+	pxor DATA, T2
+	pxor SHASH, T3
+
+	PCLMULQDQ 0x00 SHASH DATA	# DATA = a0 * b0
+	PCLMULQDQ 0x11 SHASH T1		# T1 = a1 * b1
+	PCLMULQDQ 0x00 T3 T2		# T2 = (a1 + a0) * (b1 + b0)
+	pxor DATA, T2
+	pxor T1, T2			# T2 = a0 * b1 + a1 * b0
+
+	movaps T2, T3
+	pslldq $8, T3
+	psrldq $8, T2
+	pxor T3, DATA
+	pxor T2, T1			# <T1:DATA> is result of
+					# carry-less multiplication
+
+	# first phase of the reduction
+	movaps DATA, T3
+	psllq $1, T3
+	pxor DATA, T3
+	psllq $5, T3
+	pxor DATA, T3
+	psllq $57, T3
+	movaps T3, T2
+	pslldq $8, T2
+	psrldq $8, T3
+	pxor T2, DATA
+	pxor T3, T1
+
+	# second phase of the reduction
+	movaps DATA, T2
+	psrlq $5, T2
+	pxor DATA, T2
+	psrlq $1, T2
+	pxor DATA, T2
+	psrlq $1, T2
+	pxor T2, T1
+	pxor T1, DATA
+	ret
+
+/* void clmul_ghash_mul(char *dst, const be128 *shash) */
+ENTRY(clmul_ghash_mul)
+	movups (%rdi), DATA
+	movups (%rsi), SHASH
+	movaps .Lbswap_mask, BSWAP
+	PSHUFB_XMM BSWAP DATA
+	call __clmul_gf128mul_ble
+	PSHUFB_XMM BSWAP DATA
+	movups DATA, (%rdi)
+	ret
+
+/*
+ * void clmul_ghash_update(char *dst, const char *src, unsigned int srclen,
+ *			   const be128 *shash);
+ */
+ENTRY(clmul_ghash_update)
+	cmp $16, %rdx
+	jb .Lupdate_just_ret	# check length
+	movaps .Lbswap_mask, BSWAP
+	movups (%rdi), DATA
+	movups (%rcx), SHASH
+	PSHUFB_XMM BSWAP DATA
+.align 4
+.Lupdate_loop:
+	movups (%rsi), IN1
+	PSHUFB_XMM BSWAP IN1
+	pxor IN1, DATA
+	call __clmul_gf128mul_ble
+	sub $16, %rdx
+	add $16, %rsi
+	cmp $16, %rdx
+	jge .Lupdate_loop
+	PSHUFB_XMM BSWAP DATA
+	movups DATA, (%rdi)
+.Lupdate_just_ret:
+	ret
+
+/*
+ * void clmul_ghash_setkey(be128 *shash, const u8 *key);
+ *
+ * Calculate hash_key << 1 mod poly
+ */
+ENTRY(clmul_ghash_setkey)
+	movaps .Lbswap_mask, BSWAP
+	movups (%rsi), %xmm0
+	PSHUFB_XMM BSWAP %xmm0
+	movaps %xmm0, %xmm1
+	psllq $1, %xmm0
+	psrlq $63, %xmm1
+	movaps %xmm1, %xmm2
+	pslldq $8, %xmm1
+	psrldq $8, %xmm2
+	por %xmm1, %xmm0
+	# reduction
+	pshufd $0b00100100, %xmm2, %xmm1
+	pcmpeqd .Ltwo_one, %xmm1
+	pand .Lpoly, %xmm1
+	pxor %xmm1, %xmm0
+	movups %xmm0, (%rdi)
+	ret
diff --git a/arch/x86/crypto/ghash-clmulni-intel_glue.c b/arch/x86/crypto/ghash-clmulni-intel_glue.c
new file mode 100644
index 000000000000..cbcc8d8ea93a
--- /dev/null
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -0,0 +1,333 @@
+/*
+ * Accelerated GHASH implementation with Intel PCLMULQDQ-NI
+ * instructions. This file contains glue code.
+ *
+ * Copyright (c) 2009 Intel Corp.
+ *   Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/crypto.h>
+#include <crypto/algapi.h>
+#include <crypto/cryptd.h>
+#include <crypto/gf128mul.h>
+#include <crypto/internal/hash.h>
+#include <asm/i387.h>
+
+#define GHASH_BLOCK_SIZE	16
+#define GHASH_DIGEST_SIZE	16
+
+void clmul_ghash_mul(char *dst, const be128 *shash);
+
+void clmul_ghash_update(char *dst, const char *src, unsigned int srclen,
+			const be128 *shash);
+
+void clmul_ghash_setkey(be128 *shash, const u8 *key);
+
+struct ghash_async_ctx {
+	struct cryptd_ahash *cryptd_tfm;
+};
+
+struct ghash_ctx {
+	be128 shash;
+};
+
+struct ghash_desc_ctx {
+	u8 buffer[GHASH_BLOCK_SIZE];
+	u32 bytes;
+};
+
+static int ghash_init(struct shash_desc *desc)
+{
+	struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+
+	memset(dctx, 0, sizeof(*dctx));
+
+	return 0;
+}
+
+static int ghash_setkey(struct crypto_shash *tfm,
+			const u8 *key, unsigned int keylen)
+{
+	struct ghash_ctx *ctx = crypto_shash_ctx(tfm);
+
+	if (keylen != GHASH_BLOCK_SIZE) {
+		crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+		return -EINVAL;
+	}
+
+	clmul_ghash_setkey(&ctx->shash, key);
+
+	return 0;
+}
+
+static int ghash_update(struct shash_desc *desc,
+			 const u8 *src, unsigned int srclen)
+{
+	struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+	struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
+	u8 *dst = dctx->buffer;
+
+	kernel_fpu_begin();
+	if (dctx->bytes) {
+		int n = min(srclen, dctx->bytes);
+		u8 *pos = dst + (GHASH_BLOCK_SIZE - dctx->bytes);
+
+		dctx->bytes -= n;
+		srclen -= n;
+
+		while (n--)
+			*pos++ ^= *src++;
+
+		if (!dctx->bytes)
+			clmul_ghash_mul(dst, &ctx->shash);
+	}
+
+	clmul_ghash_update(dst, src, srclen, &ctx->shash);
+	kernel_fpu_end();
+
+	if (srclen & 0xf) {
+		src += srclen - (srclen & 0xf);
+		srclen &= 0xf;
+		dctx->bytes = GHASH_BLOCK_SIZE - srclen;
+		while (srclen--)
+			*dst++ ^= *src++;
+	}
+
+	return 0;
+}
+
+static void ghash_flush(struct ghash_ctx *ctx, struct ghash_desc_ctx *dctx)
+{
+	u8 *dst = dctx->buffer;
+
+	if (dctx->bytes) {
+		u8 *tmp = dst + (GHASH_BLOCK_SIZE - dctx->bytes);
+
+		while (dctx->bytes--)
+			*tmp++ ^= 0;
+
+		kernel_fpu_begin();
+		clmul_ghash_mul(dst, &ctx->shash);
+		kernel_fpu_end();
+	}
+
+	dctx->bytes = 0;
+}
+
+static int ghash_final(struct shash_desc *desc, u8 *dst)
+{
+	struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+	struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
+	u8 *buf = dctx->buffer;
+
+	ghash_flush(ctx, dctx);
+	memcpy(dst, buf, GHASH_BLOCK_SIZE);
+
+	return 0;
+}
+
+static struct shash_alg ghash_alg = {
+	.digestsize	= GHASH_DIGEST_SIZE,
+	.init		= ghash_init,
+	.update		= ghash_update,
+	.final		= ghash_final,
+	.setkey		= ghash_setkey,
+	.descsize	= sizeof(struct ghash_desc_ctx),
+	.base		= {
+		.cra_name		= "__ghash",
+		.cra_driver_name	= "__ghash-pclmulqdqni",
+		.cra_priority		= 0,
+		.cra_flags		= CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize		= GHASH_BLOCK_SIZE,
+		.cra_ctxsize		= sizeof(struct ghash_ctx),
+		.cra_module		= THIS_MODULE,
+		.cra_list		= LIST_HEAD_INIT(ghash_alg.base.cra_list),
+	},
+};
+
+static int ghash_async_init(struct ahash_request *req)
+{
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
+
+	if (!irq_fpu_usable()) {
+		memcpy(cryptd_req, req, sizeof(*req));
+		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
+		return crypto_ahash_init(cryptd_req);
+	} else {
+		struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+		struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm);
+
+		desc->tfm = child;
+		desc->flags = req->base.flags;
+		return crypto_shash_init(desc);
+	}
+}
+
+static int ghash_async_update(struct ahash_request *req)
+{
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+
+	if (!irq_fpu_usable()) {
+		struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+		struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
+		struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
+
+		memcpy(cryptd_req, req, sizeof(*req));
+		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
+		return crypto_ahash_update(cryptd_req);
+	} else {
+		struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+		return shash_ahash_update(req, desc);
+	}
+}
+
+static int ghash_async_final(struct ahash_request *req)
+{
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+
+	if (!irq_fpu_usable()) {
+		struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+		struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
+		struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
+
+		memcpy(cryptd_req, req, sizeof(*req));
+		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
+		return crypto_ahash_final(cryptd_req);
+	} else {
+		struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+		return crypto_shash_final(desc, req->result);
+	}
+}
+
+static int ghash_async_digest(struct ahash_request *req)
+{
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm;
+
+	if (!irq_fpu_usable()) {
+		memcpy(cryptd_req, req, sizeof(*req));
+		ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base);
+		return crypto_ahash_digest(cryptd_req);
+	} else {
+		struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+		struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm);
+
+		desc->tfm = child;
+		desc->flags = req->base.flags;
+		return shash_ahash_digest(req, desc);
+	}
+}
+
+static int ghash_async_setkey(struct crypto_ahash *tfm, const u8 *key,
+			      unsigned int keylen)
+{
+	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct crypto_ahash *child = &ctx->cryptd_tfm->base;
+	int err;
+
+	crypto_ahash_clear_flags(child, CRYPTO_TFM_REQ_MASK);
+	crypto_ahash_set_flags(child, crypto_ahash_get_flags(tfm)
+			       & CRYPTO_TFM_REQ_MASK);
+	err = crypto_ahash_setkey(child, key, keylen);
+	crypto_ahash_set_flags(tfm, crypto_ahash_get_flags(child)
+			       & CRYPTO_TFM_RES_MASK);
+
+	return 0;
+}
+
+static int ghash_async_init_tfm(struct crypto_tfm *tfm)
+{
+	struct cryptd_ahash *cryptd_tfm;
+	struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	cryptd_tfm = cryptd_alloc_ahash("__ghash-pclmulqdqni", 0, 0);
+	if (IS_ERR(cryptd_tfm))
+		return PTR_ERR(cryptd_tfm);
+	ctx->cryptd_tfm = cryptd_tfm;
+	crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+				 sizeof(struct ahash_request) +
+				 crypto_ahash_reqsize(&cryptd_tfm->base));
+
+	return 0;
+}
+
+static void ghash_async_exit_tfm(struct crypto_tfm *tfm)
+{
+	struct ghash_async_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	cryptd_free_ahash(ctx->cryptd_tfm);
+}
+
+static struct ahash_alg ghash_async_alg = {
+	.init		= ghash_async_init,
+	.update		= ghash_async_update,
+	.final		= ghash_async_final,
+	.setkey		= ghash_async_setkey,
+	.digest		= ghash_async_digest,
+	.halg = {
+		.digestsize	= GHASH_DIGEST_SIZE,
+		.base = {
+			.cra_name		= "ghash",
+			.cra_driver_name	= "ghash-clmulni",
+			.cra_priority		= 400,
+			.cra_flags		= CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC,
+			.cra_blocksize		= GHASH_BLOCK_SIZE,
+			.cra_type		= &crypto_ahash_type,
+			.cra_module		= THIS_MODULE,
+			.cra_list		= LIST_HEAD_INIT(ghash_async_alg.halg.base.cra_list),
+			.cra_init		= ghash_async_init_tfm,
+			.cra_exit		= ghash_async_exit_tfm,
+		},
+	},
+};
+
+static int __init ghash_pclmulqdqni_mod_init(void)
+{
+	int err;
+
+	if (!cpu_has_pclmulqdq) {
+		printk(KERN_INFO "Intel PCLMULQDQ-NI instructions are not"
+		       " detected.\n");
+		return -ENODEV;
+	}
+
+	err = crypto_register_shash(&ghash_alg);
+	if (err)
+		goto err_out;
+	err = crypto_register_ahash(&ghash_async_alg);
+	if (err)
+		goto err_shash;
+
+	return 0;
+
+err_shash:
+	crypto_unregister_shash(&ghash_alg);
+err_out:
+	return err;
+}
+
+static void __exit ghash_pclmulqdqni_mod_exit(void)
+{
+	crypto_unregister_ahash(&ghash_async_alg);
+	crypto_unregister_shash(&ghash_alg);
+}
+
+module_init(ghash_pclmulqdqni_mod_init);
+module_exit(ghash_pclmulqdqni_mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("GHASH Message Digest Algorithm, "
+		   "acclerated by PCLMULQDQ-NI");
+MODULE_ALIAS("ghash");
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 581b0568fe19..53147ad85b96 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -653,7 +653,7 @@ ia32_sys_call_table:
 	.quad compat_sys_writev
 	.quad sys_getsid
 	.quad sys_fdatasync
-	.quad sys32_sysctl	/* sysctl */
+	.quad compat_sys_sysctl	/* sysctl */
 	.quad sys_mlock		/* 150 */
 	.quad sys_munlock
 	.quad sys_mlockall
@@ -696,7 +696,7 @@ ia32_sys_call_table:
 	.quad quiet_ni_syscall		/* streams2 */
 	.quad stub32_vfork            /* 190 */
 	.quad compat_sys_getrlimit
-	.quad sys32_mmap2
+	.quad sys_mmap_pgoff
 	.quad sys32_truncate64
 	.quad sys32_ftruncate64
 	.quad sys32_stat64		/* 195 */
@@ -841,4 +841,5 @@ ia32_sys_call_table:
 	.quad compat_sys_pwritev
 	.quad compat_sys_rt_tgsigqueueinfo	/* 335 */
 	.quad sys_perf_event_open
+	.quad compat_sys_recvmmsg
 ia32_syscall_end:
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 9f5527198825..422572c77923 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -155,9 +155,6 @@ struct mmap_arg_struct {
 asmlinkage long sys32_mmap(struct mmap_arg_struct __user *arg)
 {
 	struct mmap_arg_struct a;
-	struct file *file = NULL;
-	unsigned long retval;
-	struct mm_struct *mm ;
 
 	if (copy_from_user(&a, arg, sizeof(a)))
 		return -EFAULT;
@@ -165,22 +162,8 @@ asmlinkage long sys32_mmap(struct mmap_arg_struct __user *arg)
 	if (a.offset & ~PAGE_MASK)
 		return -EINVAL;
 
-	if (!(a.flags & MAP_ANONYMOUS)) {
-		file = fget(a.fd);
-		if (!file)
-			return -EBADF;
-	}
-
-	mm = current->mm;
-	down_write(&mm->mmap_sem);
-	retval = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags,
+	return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
 			       a.offset>>PAGE_SHIFT);
-	if (file)
-		fput(file);
-
-	up_write(&mm->mmap_sem);
-
-	return retval;
 }
 
 asmlinkage long sys32_mprotect(unsigned long start, size_t len,
@@ -434,62 +417,6 @@ asmlinkage long sys32_rt_sigqueueinfo(int pid, int sig,
 	return ret;
 }
 
-#ifdef CONFIG_SYSCTL_SYSCALL
-struct sysctl_ia32 {
-	unsigned int	name;
-	int		nlen;
-	unsigned int	oldval;
-	unsigned int	oldlenp;
-	unsigned int	newval;
-	unsigned int	newlen;
-	unsigned int	__unused[4];
-};
-
-
-asmlinkage long sys32_sysctl(struct sysctl_ia32 __user *args32)
-{
-	struct sysctl_ia32 a32;
-	mm_segment_t old_fs = get_fs();
-	void __user *oldvalp, *newvalp;
-	size_t oldlen;
-	int __user *namep;
-	long ret;
-
-	if (copy_from_user(&a32, args32, sizeof(a32)))
-		return -EFAULT;
-
-	/*
-	 * We need to pre-validate these because we have to disable
-	 * address checking before calling do_sysctl() because of
-	 * OLDLEN but we can't run the risk of the user specifying bad
-	 * addresses here.  Well, since we're dealing with 32 bit
-	 * addresses, we KNOW that access_ok() will always succeed, so
-	 * this is an expensive NOP, but so what...
-	 */
-	namep = compat_ptr(a32.name);
-	oldvalp = compat_ptr(a32.oldval);
-	newvalp =  compat_ptr(a32.newval);
-
-	if ((oldvalp && get_user(oldlen, (int __user *)compat_ptr(a32.oldlenp)))
-	    || !access_ok(VERIFY_WRITE, namep, 0)
-	    || !access_ok(VERIFY_WRITE, oldvalp, 0)
-	    || !access_ok(VERIFY_WRITE, newvalp, 0))
-		return -EFAULT;
-
-	set_fs(KERNEL_DS);
-	lock_kernel();
-	ret = do_sysctl(namep, a32.nlen, oldvalp, (size_t __user *)&oldlen,
-			newvalp, (size_t) a32.newlen);
-	unlock_kernel();
-	set_fs(old_fs);
-
-	if (oldvalp && put_user(oldlen, (int __user *)compat_ptr(a32.oldlenp)))
-		return -EFAULT;
-
-	return ret;
-}
-#endif
-
 /* warning: next two assume little endian */
 asmlinkage long sys32_pread(unsigned int fd, char __user *ubuf, u32 count,
 			    u32 poslo, u32 poshi)
@@ -539,30 +466,6 @@ asmlinkage long sys32_sendfile(int out_fd, int in_fd,
 	return ret;
 }
 
-asmlinkage long sys32_mmap2(unsigned long addr, unsigned long len,
-			    unsigned long prot, unsigned long flags,
-			    unsigned long fd, unsigned long pgoff)
-{
-	struct mm_struct *mm = current->mm;
-	unsigned long error;
-	struct file *file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			return -EBADF;
-	}
-
-	down_write(&mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&mm->mmap_sem);
-
-	if (file)
-		fput(file);
-	return error;
-}
-
 asmlinkage long sys32_olduname(struct oldold_utsname __user *name)
 {
 	char *arch = "x86_64";
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index 4a8e80cdcfa5..9f828f87ca35 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -10,6 +10,7 @@ header-y += ptrace-abi.h
 header-y += sigcontext32.h
 header-y += ucontext.h
 header-y += processor-flags.h
+header-y += hw_breakpoint.h
 
 unifdef-y += e820.h
 unifdef-y += ist.h
diff --git a/arch/x86/include/asm/a.out-core.h b/arch/x86/include/asm/a.out-core.h
index bb70e397aa84..7a15588e45d4 100644
--- a/arch/x86/include/asm/a.out-core.h
+++ b/arch/x86/include/asm/a.out-core.h
@@ -17,6 +17,7 @@
 
 #include <linux/user.h>
 #include <linux/elfcore.h>
+#include <asm/debugreg.h>
 
 /*
  * fill in the user structure for an a.out core dump
@@ -32,14 +33,7 @@ static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
 			>> PAGE_SHIFT;
 	dump->u_dsize -= dump->u_tsize;
 	dump->u_ssize = 0;
-	dump->u_debugreg[0] = current->thread.debugreg0;
-	dump->u_debugreg[1] = current->thread.debugreg1;
-	dump->u_debugreg[2] = current->thread.debugreg2;
-	dump->u_debugreg[3] = current->thread.debugreg3;
-	dump->u_debugreg[4] = 0;
-	dump->u_debugreg[5] = 0;
-	dump->u_debugreg[6] = current->thread.debugreg6;
-	dump->u_debugreg[7] = current->thread.debugreg7;
+	aout_dump_debugregs(dump);
 
 	if (dump->start_stack < TASK_SIZE)
 		dump->u_ssize = ((unsigned long)(TASK_SIZE - dump->start_stack))
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 4518dc500903..60d2b2db0bc5 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -118,7 +118,7 @@ extern void acpi_restore_state_mem(void);
 extern unsigned long acpi_wakeup_address;
 
 /* early initialization routine */
-extern void acpi_reserve_bootmem(void);
+extern void acpi_reserve_wakeup_memory(void);
 
 /*
  * Check if the CPU can handle C2 and deeper
@@ -158,6 +158,7 @@ struct bootnode;
 
 #ifdef CONFIG_ACPI_NUMA
 extern int acpi_numa;
+extern int acpi_get_nodes(struct bootnode *physnodes);
 extern int acpi_scan_nodes(unsigned long start, unsigned long end);
 #define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
 extern void acpi_fake_nodes(const struct bootnode *fake_nodes,
diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
index e2077d343c33..b97f786a48d5 100644
--- a/arch/x86/include/asm/alternative-asm.h
+++ b/arch/x86/include/asm/alternative-asm.h
@@ -1,17 +1,13 @@
 #ifdef __ASSEMBLY__
 
-#ifdef CONFIG_X86_32
-# define X86_ALIGN .long
-#else
-# define X86_ALIGN .quad
-#endif
+#include <asm/asm.h>
 
 #ifdef CONFIG_SMP
 	.macro LOCK_PREFIX
 1:	lock
 	.section .smp_locks,"a"
-	.align 4
-	X86_ALIGN 1b
+	_ASM_ALIGN
+	_ASM_PTR 1b
 	.previous
 	.endm
 #else
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index c240efc74e00..69b74a7b877f 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -84,6 +84,7 @@ static inline void alternatives_smp_switch(int smp) {}
       "	 .byte " __stringify(feature) "\n"	/* feature bit     */	\
       "	 .byte 662b-661b\n"			/* sourcelen       */	\
       "	 .byte 664f-663f\n"			/* replacementlen  */	\
+      "	 .byte 0xff + (664f-663f) - (662b-661b)\n" /* rlen <= slen */	\
       ".previous\n"							\
       ".section .altinstr_replacement, \"ax\"\n"			\
       "663:\n\t" newinstr "\n664:\n"		/* replacement     */	\
diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h
index 4b180897e6b5..5af2982133b5 100644
--- a/arch/x86/include/asm/amd_iommu.h
+++ b/arch/x86/include/asm/amd_iommu.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2007-2009 Advanced Micro Devices, Inc.
  * Author: Joerg Roedel <joerg.roedel@amd.com>
  *         Leo Duran <leo.duran@amd.com>
  *
@@ -23,19 +23,13 @@
 #include <linux/irqreturn.h>
 
 #ifdef CONFIG_AMD_IOMMU
-extern int amd_iommu_init(void);
-extern int amd_iommu_init_dma_ops(void);
-extern int amd_iommu_init_passthrough(void);
+
 extern void amd_iommu_detect(void);
-extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
-extern void amd_iommu_flush_all_domains(void);
-extern void amd_iommu_flush_all_devices(void);
-extern void amd_iommu_shutdown(void);
-extern void amd_iommu_apply_erratum_63(u16 devid);
+
 #else
-static inline int amd_iommu_init(void) { return -ENODEV; }
+
 static inline void amd_iommu_detect(void) { }
-static inline void amd_iommu_shutdown(void) { }
+
 #endif
 
 #endif /* _ASM_X86_AMD_IOMMU_H */
diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h
new file mode 100644
index 000000000000..4d817f9e6e77
--- /dev/null
+++ b/arch/x86/include/asm/amd_iommu_proto.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2009 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_X86_AMD_IOMMU_PROTO_H
+#define _ASM_X86_AMD_IOMMU_PROTO_H
+
+struct amd_iommu;
+
+extern int amd_iommu_init_dma_ops(void);
+extern int amd_iommu_init_passthrough(void);
+extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
+extern void amd_iommu_flush_all_domains(void);
+extern void amd_iommu_flush_all_devices(void);
+extern void amd_iommu_apply_erratum_63(u16 devid);
+extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu);
+extern int amd_iommu_init_devices(void);
+extern void amd_iommu_uninit_devices(void);
+extern void amd_iommu_init_notifier(void);
+#ifndef CONFIG_AMD_IOMMU_STATS
+
+static inline void amd_iommu_stats_init(void) { }
+
+#endif /* !CONFIG_AMD_IOMMU_STATS */
+
+#endif /* _ASM_X86_AMD_IOMMU_PROTO_H  */
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 2a2cc7a78a81..ba19ad4c47d0 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2007-2009 Advanced Micro Devices, Inc.
  * Author: Joerg Roedel <joerg.roedel@amd.com>
  *         Leo Duran <leo.duran@amd.com>
  *
@@ -25,6 +25,11 @@
 #include <linux/spinlock.h>
 
 /*
+ * Maximum number of IOMMUs supported
+ */
+#define MAX_IOMMUS	32
+
+/*
  * some size calculation constants
  */
 #define DEV_TABLE_ENTRY_SIZE		32
@@ -206,6 +211,9 @@ extern bool amd_iommu_dump;
 			printk(KERN_INFO "AMD-Vi: " format, ## arg);	\
 	} while(0);
 
+/* global flag if IOMMUs cache non-present entries */
+extern bool amd_iommu_np_cache;
+
 /*
  * Make iterating over all IOMMUs easier
  */
@@ -226,6 +234,8 @@ extern bool amd_iommu_dump;
  * independent of their use.
  */
 struct protection_domain {
+	struct list_head list;  /* for list of all protection domains */
+	struct list_head dev_list; /* List of all devices in this domain */
 	spinlock_t lock;	/* mostly used to lock the page table*/
 	u16 id;			/* the domain id written to the device table */
 	int mode;		/* paging mode (0-6 levels) */
@@ -233,7 +243,20 @@ struct protection_domain {
 	unsigned long flags;	/* flags to find out type of domain */
 	bool updated;		/* complete domain flush required */
 	unsigned dev_cnt;	/* devices assigned to this domain */
+	unsigned dev_iommu[MAX_IOMMUS]; /* per-IOMMU reference count */
 	void *priv;		/* private data */
+
+};
+
+/*
+ * This struct contains device specific data for the IOMMU
+ */
+struct iommu_dev_data {
+	struct list_head list;		  /* For domain->dev_list */
+	struct device *dev;		  /* Device this data belong to */
+	struct device *alias;		  /* The Alias Device */
+	struct protection_domain *domain; /* Domain the device is bound to */
+	atomic_t bind;			  /* Domain attach reverent count */
 };
 
 /*
@@ -291,6 +314,9 @@ struct dma_ops_domain {
 struct amd_iommu {
 	struct list_head list;
 
+	/* Index within the IOMMU array */
+	int index;
+
 	/* locks the accesses to the hardware */
 	spinlock_t lock;
 
@@ -357,6 +383,21 @@ struct amd_iommu {
 extern struct list_head amd_iommu_list;
 
 /*
+ * Array with pointers to each IOMMU struct
+ * The indices are referenced in the protection domains
+ */
+extern struct amd_iommu *amd_iommus[MAX_IOMMUS];
+
+/* Number of IOMMUs present in the system */
+extern int amd_iommus_present;
+
+/*
+ * Declarations for the global list of all protection domains
+ */
+extern spinlock_t amd_iommu_pd_lock;
+extern struct list_head amd_iommu_pd_list;
+
+/*
  * Structure defining one entry in the device table
  */
 struct dev_table_entry {
@@ -416,15 +457,9 @@ extern unsigned amd_iommu_aperture_order;
 /* largest PCI device id we expect translation requests for */
 extern u16 amd_iommu_last_bdf;
 
-/* data structures for protection domain handling */
-extern struct protection_domain **amd_iommu_pd_table;
-
 /* allocation bitmap for domain ids */
 extern unsigned long *amd_iommu_pd_alloc_bitmap;
 
-/* will be 1 if device isolation is enabled */
-extern bool amd_iommu_isolate;
-
 /*
  * If true, the addresses will be flushed on unmap time, not when
  * they are reused
@@ -462,11 +497,6 @@ struct __iommu_counter {
 #define ADD_STATS_COUNTER(name, x)
 #define SUB_STATS_COUNTER(name, x)
 
-static inline void amd_iommu_stats_init(void) { }
-
 #endif /* CONFIG_AMD_IOMMU_STATS */
 
-/* some function prototypes */
-extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu);
-
 #endif /* _ASM_X86_AMD_IOMMU_TYPES_H */
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 474d80d3e6cc..b4ac2cdcb64f 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -297,20 +297,20 @@ struct apic {
 	int disable_esr;
 
 	int dest_logical;
-	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
+	unsigned long (*check_apicid_used)(physid_mask_t *map, int apicid);
 	unsigned long (*check_apicid_present)(int apicid);
 
 	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
 	void (*init_apic_ldr)(void);
 
-	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
+	void (*ioapic_phys_id_map)(physid_mask_t *phys_map, physid_mask_t *retmap);
 
 	void (*setup_apic_routing)(void);
 	int (*multi_timer_check)(int apic, int irq);
 	int (*apicid_to_node)(int logical_apicid);
 	int (*cpu_to_logical_apicid)(int cpu);
 	int (*cpu_present_to_apicid)(int mps_cpu);
-	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
+	void (*apicid_to_cpu_present)(int phys_apicid, physid_mask_t *retmap);
 	void (*setup_portio_remap)(void);
 	int (*check_phys_apicid_present)(int phys_apicid);
 	void (*enable_apic_mode)(void);
@@ -488,6 +488,8 @@ static inline unsigned int read_apic_id(void)
 
 extern void default_setup_apic_routing(void);
 
+extern struct apic apic_noop;
+
 #ifdef CONFIG_X86_32
 
 extern struct apic apic_default;
@@ -532,9 +534,9 @@ default_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 	return (unsigned int)(mask1 & mask2 & mask3);
 }
 
-static inline unsigned long default_check_apicid_used(physid_mask_t bitmap, int apicid)
+static inline unsigned long default_check_apicid_used(physid_mask_t *map, int apicid)
 {
-	return physid_isset(apicid, bitmap);
+	return physid_isset(apicid, *map);
 }
 
 static inline unsigned long default_check_apicid_present(int bit)
@@ -542,9 +544,9 @@ static inline unsigned long default_check_apicid_present(int bit)
 	return physid_isset(bit, phys_cpu_present_map);
 }
 
-static inline physid_mask_t default_ioapic_phys_id_map(physid_mask_t phys_map)
+static inline void default_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
 {
-	return phys_map;
+	*retmap = *phys_map;
 }
 
 /* Mapping from cpu number to logical apicid */
@@ -583,11 +585,6 @@ extern int default_cpu_present_to_apicid(int mps_cpu);
 extern int default_check_phys_apicid_present(int phys_apicid);
 #endif
 
-static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
-{
-	return physid_mask_of_physid(phys_apicid);
-}
-
 #endif /* CONFIG_X86_LOCAL_APIC */
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 3b62da926de9..7fe3b3060f08 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -11,6 +11,12 @@
 #define IO_APIC_DEFAULT_PHYS_BASE	0xfec00000
 #define	APIC_DEFAULT_PHYS_BASE		0xfee00000
 
+/*
+ * This is the IO-APIC register space as specified
+ * by Intel docs:
+ */
+#define IO_APIC_SLOT_SIZE		1024
+
 #define	APIC_ID		0x20
 
 #define	APIC_LVR	0x30
diff --git a/arch/x86/include/asm/apicnum.h b/arch/x86/include/asm/apicnum.h
deleted file mode 100644
index 82f613c607ce..000000000000
--- a/arch/x86/include/asm/apicnum.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_X86_APICNUM_H
-#define _ASM_X86_APICNUM_H
-
-/* define MAX_IO_APICS */
-#ifdef CONFIG_X86_32
-# define MAX_IO_APICS 64
-#else
-# define MAX_IO_APICS 128
-# define MAX_LOCAL_APIC 32768
-#endif
-
-#endif /* _ASM_X86_APICNUM_H */
diff --git a/arch/x86/include/asm/bug.h b/arch/x86/include/asm/bug.h
index d9cf1cd156d2..f654d1bb17fb 100644
--- a/arch/x86/include/asm/bug.h
+++ b/arch/x86/include/asm/bug.h
@@ -22,14 +22,14 @@ do {								\
 		     ".popsection"				\
 		     : : "i" (__FILE__), "i" (__LINE__),	\
 		     "i" (sizeof(struct bug_entry)));		\
-	for (;;) ;						\
+	unreachable();						\
 } while (0)
 
 #else
 #define BUG()							\
 do {								\
 	asm volatile("ud2");					\
-	for (;;) ;						\
+	unreachable();						\
 } while (0)
 #endif
 
diff --git a/arch/x86/include/asm/cache.h b/arch/x86/include/asm/cache.h
index 549860d3be8f..2f9047cfaaca 100644
--- a/arch/x86/include/asm/cache.h
+++ b/arch/x86/include/asm/cache.h
@@ -9,12 +9,13 @@
 
 #define __read_mostly __attribute__((__section__(".data.read_mostly")))
 
+#define INTERNODE_CACHE_SHIFT CONFIG_X86_INTERNODE_CACHE_SHIFT
+#define INTERNODE_CACHE_BYTES (1 << INTERNODE_CACHE_SHIFT)
+
 #ifdef CONFIG_X86_VSMP
-/* vSMP Internode cacheline shift */
-#define INTERNODE_CACHE_SHIFT (12)
 #ifdef CONFIG_SMP
 #define __cacheline_aligned_in_smp					\
-	__attribute__((__aligned__(1 << (INTERNODE_CACHE_SHIFT))))	\
+	__attribute__((__aligned__(INTERNODE_CACHE_BYTES)))		\
 	__page_aligned_data
 #endif
 #endif
diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
index b54f6afe7ec4..634c40a739a6 100644
--- a/arch/x86/include/asm/cacheflush.h
+++ b/arch/x86/include/asm/cacheflush.h
@@ -12,6 +12,7 @@ static inline void flush_cache_range(struct vm_area_struct *vma,
 				     unsigned long start, unsigned long end) { }
 static inline void flush_cache_page(struct vm_area_struct *vma,
 				    unsigned long vmaddr, unsigned long pfn) { }
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 static inline void flush_dcache_page(struct page *page) { }
 static inline void flush_dcache_mmap_lock(struct address_space *mapping) { }
 static inline void flush_dcache_mmap_unlock(struct address_space *mapping) { }
@@ -176,6 +177,7 @@ void clflush_cache_range(void *addr, unsigned int size);
 #ifdef CONFIG_DEBUG_RODATA
 void mark_rodata_ro(void);
 extern const int rodata_test_data;
+extern int kernel_set_to_readonly;
 void set_kernel_text_rw(void);
 void set_kernel_text_ro(void);
 #else
diff --git a/arch/x86/include/asm/calgary.h b/arch/x86/include/asm/calgary.h
index b03bedb62aa7..0918654305af 100644
--- a/arch/x86/include/asm/calgary.h
+++ b/arch/x86/include/asm/calgary.h
@@ -62,10 +62,8 @@ struct cal_chipset_ops {
 extern int use_calgary;
 
 #ifdef CONFIG_CALGARY_IOMMU
-extern int calgary_iommu_init(void);
 extern void detect_calgary(void);
 #else
-static inline int calgary_iommu_init(void) { return 1; }
 static inline void detect_calgary(void) { return; }
 #endif
 
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
index ee1931be6593..ffb9bb6b6c37 100644
--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -8,14 +8,50 @@
  *       you need to test for the feature in boot_cpu_data.
  */
 
-#define xchg(ptr, v)							\
-	((__typeof__(*(ptr)))__xchg((unsigned long)(v), (ptr), sizeof(*(ptr))))
+extern void __xchg_wrong_size(void);
+
+/*
+ * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
+ * Note 2: xchg has side effect, so that attribute volatile is necessary,
+ *	  but generally the primitive is invalid, *ptr is output argument. --ANK
+ */
 
 struct __xchg_dummy {
 	unsigned long a[100];
 };
 #define __xg(x) ((struct __xchg_dummy *)(x))
 
+#define __xchg(x, ptr, size)						\
+({									\
+	__typeof(*(ptr)) __x = (x);					\
+	switch (size) {							\
+	case 1:								\
+		asm volatile("xchgb %b0,%1"				\
+			     : "=q" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	case 2:								\
+		asm volatile("xchgw %w0,%1"				\
+			     : "=r" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	case 4:								\
+		asm volatile("xchgl %0,%1"				\
+			     : "=r" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	default:							\
+		__xchg_wrong_size();					\
+	}								\
+	__x;								\
+})
+
+#define xchg(ptr, v)							\
+	__xchg((v), (ptr), sizeof(*ptr))
+
 /*
  * The semantics of XCHGCMP8B are a bit strange, this is why
  * there is a loop and the loading of %%eax and %%edx has to
@@ -71,57 +107,63 @@ static inline void __set_64bit_var(unsigned long long *ptr,
 		       (unsigned int)((value) >> 32))			\
 	 : __set_64bit(ptr, ll_low((value)), ll_high((value))))
 
-/*
- * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
- * Note 2: xchg has side effect, so that attribute volatile is necessary,
- *	  but generally the primitive is invalid, *ptr is output argument. --ANK
- */
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
-				   int size)
-{
-	switch (size) {
-	case 1:
-		asm volatile("xchgb %b0,%1"
-			     : "=q" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 2:
-		asm volatile("xchgw %w0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 4:
-		asm volatile("xchgl %0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	}
-	return x;
-}
+extern void __cmpxchg_wrong_size(void);
 
 /*
  * Atomic compare and exchange.  Compare OLD with MEM, if identical,
  * store NEW in MEM.  Return the initial value in MEM.  Success is
  * indicated by comparing RETURN with OLD.
  */
+#define __raw_cmpxchg(ptr, old, new, size, lock)			\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	__typeof__(*(ptr)) __old = (old);				\
+	__typeof__(*(ptr)) __new = (new);				\
+	switch (size) {							\
+	case 1:								\
+		asm volatile(lock "cmpxchgb %b1,%2"			\
+			     : "=a"(__ret)				\
+			     : "q"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	case 2:								\
+		asm volatile(lock "cmpxchgw %w1,%2"			\
+			     : "=a"(__ret)				\
+			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	case 4:								\
+		asm volatile(lock "cmpxchgl %1,%2"			\
+			     : "=a"(__ret)				\
+			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	default:							\
+		__cmpxchg_wrong_size();					\
+	}								\
+	__ret;								\
+})
+
+#define __cmpxchg(ptr, old, new, size)					\
+	__raw_cmpxchg((ptr), (old), (new), (size), LOCK_PREFIX)
+
+#define __sync_cmpxchg(ptr, old, new, size)				\
+	__raw_cmpxchg((ptr), (old), (new), (size), "lock; ")
+
+#define __cmpxchg_local(ptr, old, new, size)				\
+	__raw_cmpxchg((ptr), (old), (new), (size), "")
 
 #ifdef CONFIG_X86_CMPXCHG
 #define __HAVE_ARCH_CMPXCHG 1
-#define cmpxchg(ptr, o, n)						\
-	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	\
-				       (unsigned long)(n),		\
-				       sizeof(*(ptr))))
-#define sync_cmpxchg(ptr, o, n)						\
-	((__typeof__(*(ptr)))__sync_cmpxchg((ptr), (unsigned long)(o),	\
-					    (unsigned long)(n),		\
-					    sizeof(*(ptr))))
-#define cmpxchg_local(ptr, o, n)					\
-	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
-					     (unsigned long)(n),	\
-					     sizeof(*(ptr))))
+
+#define cmpxchg(ptr, old, new)						\
+	__cmpxchg((ptr), (old), (new), sizeof(*ptr))
+
+#define sync_cmpxchg(ptr, old, new)					\
+	__sync_cmpxchg((ptr), (old), (new), sizeof(*ptr))
+
+#define cmpxchg_local(ptr, old, new)					\
+	__cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
 #endif
 
 #ifdef CONFIG_X86_CMPXCHG64
@@ -133,94 +175,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
 					       (unsigned long long)(n)))
 #endif
 
-static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
-				      unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile(LOCK_PREFIX "cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile(LOCK_PREFIX "cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile(LOCK_PREFIX "cmpxchgl %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
-
-/*
- * Always use locked operations when touching memory shared with a
- * hypervisor, since the system may be SMP even if the guest kernel
- * isn't.
- */
-static inline unsigned long __sync_cmpxchg(volatile void *ptr,
-					   unsigned long old,
-					   unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile("lock; cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile("lock; cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile("lock; cmpxchgl %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
-
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
-					    unsigned long old,
-					    unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile("cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile("cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile("cmpxchgl %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
-
 static inline unsigned long long __cmpxchg64(volatile void *ptr,
 					     unsigned long long old,
 					     unsigned long long new)
diff --git a/arch/x86/include/asm/cmpxchg_64.h b/arch/x86/include/asm/cmpxchg_64.h
index 52de72e0de8c..485ae415faec 100644
--- a/arch/x86/include/asm/cmpxchg_64.h
+++ b/arch/x86/include/asm/cmpxchg_64.h
@@ -3,9 +3,6 @@
 
 #include <asm/alternative.h> /* Provides LOCK_PREFIX */
 
-#define xchg(ptr, v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v), \
-						 (ptr), sizeof(*(ptr))))
-
 #define __xg(x) ((volatile long *)(x))
 
 static inline void set_64bit(volatile unsigned long *ptr, unsigned long val)
@@ -15,167 +12,118 @@ static inline void set_64bit(volatile unsigned long *ptr, unsigned long val)
 
 #define _set_64bit set_64bit
 
+extern void __xchg_wrong_size(void);
+extern void __cmpxchg_wrong_size(void);
+
 /*
  * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
  * Note 2: xchg has side effect, so that attribute volatile is necessary,
  *	  but generally the primitive is invalid, *ptr is output argument. --ANK
  */
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
-				   int size)
-{
-	switch (size) {
-	case 1:
-		asm volatile("xchgb %b0,%1"
-			     : "=q" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 2:
-		asm volatile("xchgw %w0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 4:
-		asm volatile("xchgl %k0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 8:
-		asm volatile("xchgq %0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	}
-	return x;
-}
+#define __xchg(x, ptr, size)						\
+({									\
+	__typeof(*(ptr)) __x = (x);					\
+	switch (size) {							\
+	case 1:								\
+		asm volatile("xchgb %b0,%1"				\
+			     : "=q" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	case 2:								\
+		asm volatile("xchgw %w0,%1"				\
+			     : "=r" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	case 4:								\
+		asm volatile("xchgl %k0,%1"				\
+			     : "=r" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	case 8:								\
+		asm volatile("xchgq %0,%1"				\
+			     : "=r" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	default:							\
+		__xchg_wrong_size();					\
+	}								\
+	__x;								\
+})
+
+#define xchg(ptr, v)							\
+	__xchg((v), (ptr), sizeof(*ptr))
+
+#define __HAVE_ARCH_CMPXCHG 1
 
 /*
  * Atomic compare and exchange.  Compare OLD with MEM, if identical,
  * store NEW in MEM.  Return the initial value in MEM.  Success is
  * indicated by comparing RETURN with OLD.
  */
+#define __raw_cmpxchg(ptr, old, new, size, lock)			\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	__typeof__(*(ptr)) __old = (old);				\
+	__typeof__(*(ptr)) __new = (new);				\
+	switch (size) {							\
+	case 1:								\
+		asm volatile(lock "cmpxchgb %b1,%2"			\
+			     : "=a"(__ret)				\
+			     : "q"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	case 2:								\
+		asm volatile(lock "cmpxchgw %w1,%2"			\
+			     : "=a"(__ret)				\
+			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	case 4:								\
+		asm volatile(lock "cmpxchgl %k1,%2"			\
+			     : "=a"(__ret)				\
+			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	case 8:								\
+		asm volatile(lock "cmpxchgq %1,%2"			\
+			     : "=a"(__ret)				\
+			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	default:							\
+		__cmpxchg_wrong_size();					\
+	}								\
+	__ret;								\
+})
 
-#define __HAVE_ARCH_CMPXCHG 1
+#define __cmpxchg(ptr, old, new, size)					\
+	__raw_cmpxchg((ptr), (old), (new), (size), LOCK_PREFIX)
 
-static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
-				      unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile(LOCK_PREFIX "cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile(LOCK_PREFIX "cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile(LOCK_PREFIX "cmpxchgl %k1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 8:
-		asm volatile(LOCK_PREFIX "cmpxchgq %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
+#define __sync_cmpxchg(ptr, old, new, size)				\
+	__raw_cmpxchg((ptr), (old), (new), (size), "lock; ")
 
-/*
- * Always use locked operations when touching memory shared with a
- * hypervisor, since the system may be SMP even if the guest kernel
- * isn't.
- */
-static inline unsigned long __sync_cmpxchg(volatile void *ptr,
-					   unsigned long old,
-					   unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile("lock; cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile("lock; cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile("lock; cmpxchgl %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
+#define __cmpxchg_local(ptr, old, new, size)				\
+	__raw_cmpxchg((ptr), (old), (new), (size), "")
 
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
-					    unsigned long old,
-					    unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile("cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile("cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile("cmpxchgl %k1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 8:
-		asm volatile("cmpxchgq %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
+#define cmpxchg(ptr, old, new)						\
+	__cmpxchg((ptr), (old), (new), sizeof(*ptr))
+
+#define sync_cmpxchg(ptr, old, new)					\
+	__sync_cmpxchg((ptr), (old), (new), sizeof(*ptr))
+
+#define cmpxchg_local(ptr, old, new)					\
+	__cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
 
-#define cmpxchg(ptr, o, n)						\
-	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	\
-				       (unsigned long)(n), sizeof(*(ptr))))
 #define cmpxchg64(ptr, o, n)						\
 ({									\
 	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
 	cmpxchg((ptr), (o), (n));					\
 })
-#define cmpxchg_local(ptr, o, n)					\
-	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
-					     (unsigned long)(n),	\
-					     sizeof(*(ptr))))
-#define sync_cmpxchg(ptr, o, n)						\
-	((__typeof__(*(ptr)))__sync_cmpxchg((ptr), (unsigned long)(o),	\
-					    (unsigned long)(n),		\
-					    sizeof(*(ptr))))
+
 #define cmpxchg64_local(ptr, o, n)					\
 ({									\
 	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 9cfc88b97742..613700f27a4a 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -248,6 +248,7 @@ extern const char * const x86_power_flags[32];
 #define cpu_has_x2apic		boot_cpu_has(X86_FEATURE_X2APIC)
 #define cpu_has_xsave		boot_cpu_has(X86_FEATURE_XSAVE)
 #define cpu_has_hypervisor	boot_cpu_has(X86_FEATURE_HYPERVISOR)
+#define cpu_has_pclmulqdq	boot_cpu_has(X86_FEATURE_PCLMULQDQ)
 
 #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
 # define cpu_has_invlpg		1
diff --git a/arch/x86/include/asm/debugreg.h b/arch/x86/include/asm/debugreg.h
index 3ea6f37be9e2..8240f76b531e 100644
--- a/arch/x86/include/asm/debugreg.h
+++ b/arch/x86/include/asm/debugreg.h
@@ -18,6 +18,7 @@
 #define DR_TRAP1	(0x2)		/* db1 */
 #define DR_TRAP2	(0x4)		/* db2 */
 #define DR_TRAP3	(0x8)		/* db3 */
+#define DR_TRAP_BITS	(DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)
 
 #define DR_STEP		(0x4000)	/* single-step */
 #define DR_SWITCH	(0x8000)	/* task switch */
@@ -49,6 +50,8 @@
 
 #define DR_LOCAL_ENABLE_SHIFT 0    /* Extra shift to the local enable bit */
 #define DR_GLOBAL_ENABLE_SHIFT 1   /* Extra shift to the global enable bit */
+#define DR_LOCAL_ENABLE (0x1)      /* Local enable for reg 0 */
+#define DR_GLOBAL_ENABLE (0x2)     /* Global enable for reg 0 */
 #define DR_ENABLE_SIZE 2           /* 2 enable bits per register */
 
 #define DR_LOCAL_ENABLE_MASK (0x55)  /* Set  local bits for all 4 regs */
@@ -67,4 +70,34 @@
 #define DR_LOCAL_SLOWDOWN (0x100)   /* Local slow the pipeline */
 #define DR_GLOBAL_SLOWDOWN (0x200)  /* Global slow the pipeline */
 
+/*
+ * HW breakpoint additions
+ */
+#ifdef __KERNEL__
+
+DECLARE_PER_CPU(unsigned long, cpu_dr7);
+
+static inline void hw_breakpoint_disable(void)
+{
+	/* Zero the control register for HW Breakpoint */
+	set_debugreg(0UL, 7);
+
+	/* Zero-out the individual HW breakpoint address registers */
+	set_debugreg(0UL, 0);
+	set_debugreg(0UL, 1);
+	set_debugreg(0UL, 2);
+	set_debugreg(0UL, 3);
+}
+
+static inline int hw_breakpoint_active(void)
+{
+	return __get_cpu_var(cpu_dr7) & DR_GLOBAL_ENABLE_MASK;
+}
+
+extern void aout_dump_debugregs(struct user *dump);
+
+extern void hw_breakpoint_restore(void);
+
+#endif	/* __KERNEL__ */
+
 #endif /* _ASM_X86_DEBUGREG_H */
diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h
index 9d6684849fd9..278441f39856 100644
--- a/arch/x86/include/asm/desc_defs.h
+++ b/arch/x86/include/asm/desc_defs.h
@@ -12,9 +12,9 @@
 #include <linux/types.h>
 
 /*
- * FIXME: Acessing the desc_struct through its fields is more elegant,
+ * FIXME: Accessing the desc_struct through its fields is more elegant,
  * and should be the one valid thing to do. However, a lot of open code
- * still touches the a and b acessors, and doing this allow us to do it
+ * still touches the a and b accessors, and doing this allow us to do it
  * incrementally. We keep the signature as a struct, rather than an union,
  * so we can get rid of it transparently in the future -- glommer
  */
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
index cee34e9ca45b..029f230ab637 100644
--- a/arch/x86/include/asm/device.h
+++ b/arch/x86/include/asm/device.h
@@ -8,7 +8,7 @@ struct dev_archdata {
 #ifdef CONFIG_X86_64
 struct dma_map_ops *dma_ops;
 #endif
-#ifdef CONFIG_DMAR
+#if defined(CONFIG_DMAR) || defined(CONFIG_AMD_IOMMU)
 	void *iommu; /* hook for IOMMU specific extension */
 #endif
 };
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index 6a25d5d42836..0f6c02f3b7d4 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -20,7 +20,8 @@
 # define ISA_DMA_BIT_MASK DMA_BIT_MASK(32)
 #endif
 
-extern dma_addr_t bad_dma_address;
+#define DMA_ERROR_CODE	0
+
 extern int iommu_merge;
 extern struct device x86_dma_fallback_dev;
 extern int panic_on_overflow;
@@ -48,7 +49,7 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 	if (ops->mapping_error)
 		return ops->mapping_error(dev, dma_addr);
 
-	return (dma_addr == bad_dma_address);
+	return (dma_addr == DMA_ERROR_CODE);
 }
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 40b4e614fe71..761249e396fe 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -61,6 +61,12 @@ struct e820map {
 	struct e820entry map[E820_X_MAX];
 };
 
+#define ISA_START_ADDRESS	0xa0000
+#define ISA_END_ADDRESS		0x100000
+
+#define BIOS_BEGIN		0x000a0000
+#define BIOS_END		0x00100000
+
 #ifdef __KERNEL__
 /* see comment in arch/x86/kernel/e820.c */
 extern struct e820map e820;
@@ -126,15 +132,18 @@ extern void e820_reserve_resources(void);
 extern void e820_reserve_resources_late(void);
 extern void setup_memory_map(void);
 extern char *default_machine_specific_memory_setup(void);
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
 
-#define ISA_START_ADDRESS	0xa0000
-#define ISA_END_ADDRESS		0x100000
-#define is_ISA_range(s, e) ((s) >= ISA_START_ADDRESS && (e) < ISA_END_ADDRESS)
+/*
+ * Returns true iff the specified range [s,e) is completely contained inside
+ * the ISA region.
+ */
+static inline bool is_ISA_range(u64 s, u64 e)
+{
+	return s >= ISA_START_ADDRESS && e <= ISA_END_ADDRESS;
+}
 
-#define BIOS_BEGIN		0x000a0000
-#define BIOS_END		0x00100000
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
 
 #ifdef __KERNEL__
 #include <linux/ioport.h>
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index 456a304b8172..8a024babe5e6 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -157,19 +157,6 @@ do {						\
 
 #define compat_elf_check_arch(x)	elf_check_arch_ia32(x)
 
-static inline void start_ia32_thread(struct pt_regs *regs, u32 ip, u32 sp)
-{
-	loadsegment(fs, 0);
-	loadsegment(ds, __USER32_DS);
-	loadsegment(es, __USER32_DS);
-	load_gs_index(0);
-	regs->ip = ip;
-	regs->sp = sp;
-	regs->flags = X86_EFLAGS_IF;
-	regs->cs = __USER32_CS;
-	regs->ss = __USER32_DS;
-}
-
 static inline void elf_common_init(struct thread_struct *t,
 				   struct pt_regs *regs, const u16 ds)
 {
@@ -191,11 +178,8 @@ do {							\
 #define	COMPAT_ELF_PLAT_INIT(regs, load_addr)		\
 	elf_common_init(&current->thread, regs, __USER_DS)
 
-#define	compat_start_thread(regs, ip, sp)		\
-do {							\
-	start_ia32_thread(regs, ip, sp);		\
-	set_fs(USER_DS);				\
-} while (0)
+void start_thread_ia32(struct pt_regs *regs, u32 new_ip, u32 new_sp);
+#define compat_start_thread start_thread_ia32
 
 #define COMPAT_SET_PERSONALITY(ex)			\
 do {							\
diff --git a/arch/x86/include/asm/entry_arch.h b/arch/x86/include/asm/entry_arch.h
index f5693c81a1db..8e8ec663a98f 100644
--- a/arch/x86/include/asm/entry_arch.h
+++ b/arch/x86/include/asm/entry_arch.h
@@ -34,7 +34,7 @@ BUILD_INTERRUPT3(invalidate_interrupt7,INVALIDATE_TLB_VECTOR_START+7,
 		 smp_invalidate_interrupt)
 #endif
 
-BUILD_INTERRUPT(generic_interrupt, GENERIC_INTERRUPT_VECTOR)
+BUILD_INTERRUPT(x86_platform_ipi, X86_PLATFORM_IPI_VECTOR)
 
 /*
  * every pentium local APIC has two 'local interrupts', with a
diff --git a/arch/x86/include/asm/gart.h b/arch/x86/include/asm/gart.h
index 6cfdafa409d8..4ac5b0f33fc1 100644
--- a/arch/x86/include/asm/gart.h
+++ b/arch/x86/include/asm/gart.h
@@ -35,8 +35,7 @@ extern int gart_iommu_aperture_allowed;
 extern int gart_iommu_aperture_disabled;
 
 extern void early_gart_iommu_check(void);
-extern void gart_iommu_init(void);
-extern void gart_iommu_shutdown(void);
+extern int gart_iommu_init(void);
 extern void __init gart_parse_options(char *);
 extern void gart_iommu_hole_init(void);
 
@@ -48,12 +47,6 @@ extern void gart_iommu_hole_init(void);
 static inline void early_gart_iommu_check(void)
 {
 }
-static inline void gart_iommu_init(void)
-{
-}
-static inline void gart_iommu_shutdown(void)
-{
-}
 static inline void gart_parse_options(char *options)
 {
 }
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 82e3e8f01043..0f8576427cfe 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -12,7 +12,7 @@ typedef struct {
 	unsigned int apic_timer_irqs;	/* arch dependent */
 	unsigned int irq_spurious_count;
 #endif
-	unsigned int generic_irqs;	/* arch dependent */
+	unsigned int x86_platform_ipis;	/* arch dependent */
 	unsigned int apic_perf_irqs;
 	unsigned int apic_pending_irqs;
 #ifdef CONFIG_SMP
@@ -20,11 +20,11 @@ typedef struct {
 	unsigned int irq_call_count;
 	unsigned int irq_tlb_count;
 #endif
-#ifdef CONFIG_X86_MCE
+#ifdef CONFIG_X86_THERMAL_VECTOR
 	unsigned int irq_thermal_count;
-# ifdef CONFIG_X86_MCE_THRESHOLD
+#endif
+#ifdef CONFIG_X86_MCE_THRESHOLD
 	unsigned int irq_threshold_count;
-# endif
 #endif
 } ____cacheline_aligned irq_cpustat_t;
 
diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h
index 1c22cb05ad6a..5d89fd2a3690 100644
--- a/arch/x86/include/asm/hpet.h
+++ b/arch/x86/include/asm/hpet.h
@@ -65,11 +65,12 @@
 /* hpet memory map physical address */
 extern unsigned long hpet_address;
 extern unsigned long force_hpet_address;
+extern u8 hpet_blockid;
 extern int hpet_force_user;
 extern int is_hpet_enabled(void);
 extern int hpet_enable(void);
 extern void hpet_disable(void);
-extern unsigned long hpet_readl(unsigned long a);
+extern unsigned int hpet_readl(unsigned int a);
 extern void force_hpet_resume(void);
 
 extern void hpet_msi_unmask(unsigned int irq);
@@ -78,9 +79,9 @@ extern void hpet_msi_write(unsigned int irq, struct msi_msg *msg);
 extern void hpet_msi_read(unsigned int irq, struct msi_msg *msg);
 
 #ifdef CONFIG_PCI_MSI
-extern int arch_setup_hpet_msi(unsigned int irq);
+extern int arch_setup_hpet_msi(unsigned int irq, unsigned int id);
 #else
-static inline int arch_setup_hpet_msi(unsigned int irq)
+static inline int arch_setup_hpet_msi(unsigned int irq, unsigned int id)
 {
 	return -EINVAL;
 }
diff --git a/arch/x86/include/asm/hw_breakpoint.h b/arch/x86/include/asm/hw_breakpoint.h
new file mode 100644
index 000000000000..0675a7c4c20e
--- /dev/null
+++ b/arch/x86/include/asm/hw_breakpoint.h
@@ -0,0 +1,73 @@
+#ifndef	_I386_HW_BREAKPOINT_H
+#define	_I386_HW_BREAKPOINT_H
+
+#ifdef	__KERNEL__
+#define	__ARCH_HW_BREAKPOINT_H
+
+/*
+ * The name should probably be something dealt in
+ * a higher level. While dealing with the user
+ * (display/resolving)
+ */
+struct arch_hw_breakpoint {
+	char		*name; /* Contains name of the symbol to set bkpt */
+	unsigned long	address;
+	u8		len;
+	u8		type;
+};
+
+#include <linux/kdebug.h>
+#include <linux/percpu.h>
+#include <linux/list.h>
+
+/* Available HW breakpoint length encodings */
+#define X86_BREAKPOINT_LEN_1		0x40
+#define X86_BREAKPOINT_LEN_2		0x44
+#define X86_BREAKPOINT_LEN_4		0x4c
+#define X86_BREAKPOINT_LEN_EXECUTE	0x40
+
+#ifdef CONFIG_X86_64
+#define X86_BREAKPOINT_LEN_8		0x48
+#endif
+
+/* Available HW breakpoint type encodings */
+
+/* trigger on instruction execute */
+#define X86_BREAKPOINT_EXECUTE	0x80
+/* trigger on memory write */
+#define X86_BREAKPOINT_WRITE	0x81
+/* trigger on memory read or write */
+#define X86_BREAKPOINT_RW	0x83
+
+/* Total number of available HW breakpoint registers */
+#define HBP_NUM 4
+
+struct perf_event;
+struct pmu;
+
+extern int arch_check_va_in_userspace(unsigned long va, u8 hbp_len);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp,
+					 struct task_struct *tsk);
+extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+					   unsigned long val, void *data);
+
+
+int arch_install_hw_breakpoint(struct perf_event *bp);
+void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+void hw_breakpoint_pmu_read(struct perf_event *bp);
+void hw_breakpoint_pmu_unthrottle(struct perf_event *bp);
+
+extern void
+arch_fill_perf_breakpoint(struct perf_event *bp);
+
+unsigned long encode_dr7(int drnum, unsigned int len, unsigned int type);
+int decode_dr7(unsigned long dr7, int bpnum, unsigned *len, unsigned *type);
+
+extern int arch_bp_generic_fields(int x86_len, int x86_type,
+				  int *gen_len, int *gen_type);
+
+extern struct pmu perf_ops_bp;
+
+#endif	/* __KERNEL__ */
+#endif	/* _I386_HW_BREAKPOINT_H */
+
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index ba180d93b08c..08c48a81841f 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -27,7 +27,7 @@
 
 /* Interrupt handlers registered during init_IRQ */
 extern void apic_timer_interrupt(void);
-extern void generic_interrupt(void);
+extern void x86_platform_ipi(void);
 extern void error_interrupt(void);
 extern void perf_pending_interrupt(void);
 
@@ -79,14 +79,32 @@ static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
 					int ioapic, int ioapic_pin,
 					int trigger, int polarity)
 {
-	irq_attr->ioapic     = ioapic;
-	irq_attr->ioapic_pin = ioapic_pin;
-	irq_attr->trigger    = trigger;
-	irq_attr->polarity   = polarity;
+	irq_attr->ioapic	= ioapic;
+	irq_attr->ioapic_pin	= ioapic_pin;
+	irq_attr->trigger	= trigger;
+	irq_attr->polarity	= polarity;
 }
 
-extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
-					struct io_apic_irq_attr *irq_attr);
+/*
+ * This is performance-critical, we want to do it O(1)
+ *
+ * Most irqs are mapped 1:1 with pins.
+ */
+struct irq_cfg {
+	struct irq_pin_list	*irq_2_pin;
+	cpumask_var_t		domain;
+	cpumask_var_t		old_domain;
+	u8			vector;
+	u8			move_in_progress : 1;
+};
+
+extern struct irq_cfg *irq_cfg(unsigned int);
+extern int assign_irq_vector(int, struct irq_cfg *, const struct cpumask *);
+extern void send_cleanup_vector(struct irq_cfg *);
+
+struct irq_desc;
+extern unsigned int set_desc_affinity(struct irq_desc *, const struct cpumask *);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin, struct io_apic_irq_attr *irq_attr);
 extern void setup_ioapic_dest(void);
 
 extern void enable_IO_APIC(void);
@@ -101,7 +119,7 @@ extern void eisa_set_level_irq(unsigned int irq);
 /* SMP */
 extern void smp_apic_timer_interrupt(struct pt_regs *);
 extern void smp_spurious_interrupt(struct pt_regs *);
-extern void smp_generic_interrupt(struct pt_regs *);
+extern void smp_x86_platform_ipi(struct pt_regs *);
 extern void smp_error_interrupt(struct pt_regs *);
 #ifdef CONFIG_X86_IO_APIC
 extern asmlinkage void smp_irq_move_cleanup_interrupt(void);
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 0b20bbb758f2..ebfb8a9e11f7 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -10,6 +10,8 @@
 #ifndef _ASM_X86_I387_H
 #define _ASM_X86_I387_H
 
+#ifndef __ASSEMBLY__
+
 #include <linux/sched.h>
 #include <linux/kernel_stat.h>
 #include <linux/regset.h>
@@ -411,4 +413,9 @@ static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
 	}
 }
 
+#endif /* __ASSEMBLY__ */
+
+#define PSHUFB_XMM5_XMM0 .byte 0x66, 0x0f, 0x38, 0x00, 0xc5
+#define PSHUFB_XMM5_XMM6 .byte 0x66, 0x0f, 0x38, 0x00, 0xf5
+
 #endif /* _ASM_X86_I387_H */
diff --git a/arch/x86/include/asm/inat.h b/arch/x86/include/asm/inat.h
new file mode 100644
index 000000000000..205b063e3e32
--- /dev/null
+++ b/arch/x86/include/asm/inat.h
@@ -0,0 +1,220 @@
+#ifndef _ASM_X86_INAT_H
+#define _ASM_X86_INAT_H
+/*
+ * x86 instruction attributes
+ *
+ * Written by Masami Hiramatsu <mhiramat@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#include <asm/inat_types.h>
+
+/*
+ * Internal bits. Don't use bitmasks directly, because these bits are
+ * unstable. You should use checking functions.
+ */
+
+#define INAT_OPCODE_TABLE_SIZE 256
+#define INAT_GROUP_TABLE_SIZE 8
+
+/* Legacy last prefixes */
+#define INAT_PFX_OPNDSZ	1	/* 0x66 */ /* LPFX1 */
+#define INAT_PFX_REPE	2	/* 0xF3 */ /* LPFX2 */
+#define INAT_PFX_REPNE	3	/* 0xF2 */ /* LPFX3 */
+/* Other Legacy prefixes */
+#define INAT_PFX_LOCK	4	/* 0xF0 */
+#define INAT_PFX_CS	5	/* 0x2E */
+#define INAT_PFX_DS	6	/* 0x3E */
+#define INAT_PFX_ES	7	/* 0x26 */
+#define INAT_PFX_FS	8	/* 0x64 */
+#define INAT_PFX_GS	9	/* 0x65 */
+#define INAT_PFX_SS	10	/* 0x36 */
+#define INAT_PFX_ADDRSZ	11	/* 0x67 */
+/* x86-64 REX prefix */
+#define INAT_PFX_REX	12	/* 0x4X */
+/* AVX VEX prefixes */
+#define INAT_PFX_VEX2	13	/* 2-bytes VEX prefix */
+#define INAT_PFX_VEX3	14	/* 3-bytes VEX prefix */
+
+#define INAT_LSTPFX_MAX	3
+#define INAT_LGCPFX_MAX	11
+
+/* Immediate size */
+#define INAT_IMM_BYTE		1
+#define INAT_IMM_WORD		2
+#define INAT_IMM_DWORD		3
+#define INAT_IMM_QWORD		4
+#define INAT_IMM_PTR		5
+#define INAT_IMM_VWORD32	6
+#define INAT_IMM_VWORD		7
+
+/* Legacy prefix */
+#define INAT_PFX_OFFS	0
+#define INAT_PFX_BITS	4
+#define INAT_PFX_MAX    ((1 << INAT_PFX_BITS) - 1)
+#define INAT_PFX_MASK	(INAT_PFX_MAX << INAT_PFX_OFFS)
+/* Escape opcodes */
+#define INAT_ESC_OFFS	(INAT_PFX_OFFS + INAT_PFX_BITS)
+#define INAT_ESC_BITS	2
+#define INAT_ESC_MAX	((1 << INAT_ESC_BITS) - 1)
+#define INAT_ESC_MASK	(INAT_ESC_MAX << INAT_ESC_OFFS)
+/* Group opcodes (1-16) */
+#define INAT_GRP_OFFS	(INAT_ESC_OFFS + INAT_ESC_BITS)
+#define INAT_GRP_BITS	5
+#define INAT_GRP_MAX	((1 << INAT_GRP_BITS) - 1)
+#define INAT_GRP_MASK	(INAT_GRP_MAX << INAT_GRP_OFFS)
+/* Immediates */
+#define INAT_IMM_OFFS	(INAT_GRP_OFFS + INAT_GRP_BITS)
+#define INAT_IMM_BITS	3
+#define INAT_IMM_MASK	(((1 << INAT_IMM_BITS) - 1) << INAT_IMM_OFFS)
+/* Flags */
+#define INAT_FLAG_OFFS	(INAT_IMM_OFFS + INAT_IMM_BITS)
+#define INAT_MODRM	(1 << (INAT_FLAG_OFFS))
+#define INAT_FORCE64	(1 << (INAT_FLAG_OFFS + 1))
+#define INAT_SCNDIMM	(1 << (INAT_FLAG_OFFS + 2))
+#define INAT_MOFFSET	(1 << (INAT_FLAG_OFFS + 3))
+#define INAT_VARIANT	(1 << (INAT_FLAG_OFFS + 4))
+#define INAT_VEXOK	(1 << (INAT_FLAG_OFFS + 5))
+#define INAT_VEXONLY	(1 << (INAT_FLAG_OFFS + 6))
+/* Attribute making macros for attribute tables */
+#define INAT_MAKE_PREFIX(pfx)	(pfx << INAT_PFX_OFFS)
+#define INAT_MAKE_ESCAPE(esc)	(esc << INAT_ESC_OFFS)
+#define INAT_MAKE_GROUP(grp)	((grp << INAT_GRP_OFFS) | INAT_MODRM)
+#define INAT_MAKE_IMM(imm)	(imm << INAT_IMM_OFFS)
+
+/* Attribute search APIs */
+extern insn_attr_t inat_get_opcode_attribute(insn_byte_t opcode);
+extern insn_attr_t inat_get_escape_attribute(insn_byte_t opcode,
+					     insn_byte_t last_pfx,
+					     insn_attr_t esc_attr);
+extern insn_attr_t inat_get_group_attribute(insn_byte_t modrm,
+					    insn_byte_t last_pfx,
+					    insn_attr_t esc_attr);
+extern insn_attr_t inat_get_avx_attribute(insn_byte_t opcode,
+					  insn_byte_t vex_m,
+					  insn_byte_t vex_pp);
+
+/* Attribute checking functions */
+static inline int inat_is_legacy_prefix(insn_attr_t attr)
+{
+	attr &= INAT_PFX_MASK;
+	return attr && attr <= INAT_LGCPFX_MAX;
+}
+
+static inline int inat_is_address_size_prefix(insn_attr_t attr)
+{
+	return (attr & INAT_PFX_MASK) == INAT_PFX_ADDRSZ;
+}
+
+static inline int inat_is_operand_size_prefix(insn_attr_t attr)
+{
+	return (attr & INAT_PFX_MASK) == INAT_PFX_OPNDSZ;
+}
+
+static inline int inat_is_rex_prefix(insn_attr_t attr)
+{
+	return (attr & INAT_PFX_MASK) == INAT_PFX_REX;
+}
+
+static inline int inat_last_prefix_id(insn_attr_t attr)
+{
+	if ((attr & INAT_PFX_MASK) > INAT_LSTPFX_MAX)
+		return 0;
+	else
+		return attr & INAT_PFX_MASK;
+}
+
+static inline int inat_is_vex_prefix(insn_attr_t attr)
+{
+	attr &= INAT_PFX_MASK;
+	return attr == INAT_PFX_VEX2 || attr == INAT_PFX_VEX3;
+}
+
+static inline int inat_is_vex3_prefix(insn_attr_t attr)
+{
+	return (attr & INAT_PFX_MASK) == INAT_PFX_VEX3;
+}
+
+static inline int inat_is_escape(insn_attr_t attr)
+{
+	return attr & INAT_ESC_MASK;
+}
+
+static inline int inat_escape_id(insn_attr_t attr)
+{
+	return (attr & INAT_ESC_MASK) >> INAT_ESC_OFFS;
+}
+
+static inline int inat_is_group(insn_attr_t attr)
+{
+	return attr & INAT_GRP_MASK;
+}
+
+static inline int inat_group_id(insn_attr_t attr)
+{
+	return (attr & INAT_GRP_MASK) >> INAT_GRP_OFFS;
+}
+
+static inline int inat_group_common_attribute(insn_attr_t attr)
+{
+	return attr & ~INAT_GRP_MASK;
+}
+
+static inline int inat_has_immediate(insn_attr_t attr)
+{
+	return attr & INAT_IMM_MASK;
+}
+
+static inline int inat_immediate_size(insn_attr_t attr)
+{
+	return (attr & INAT_IMM_MASK) >> INAT_IMM_OFFS;
+}
+
+static inline int inat_has_modrm(insn_attr_t attr)
+{
+	return attr & INAT_MODRM;
+}
+
+static inline int inat_is_force64(insn_attr_t attr)
+{
+	return attr & INAT_FORCE64;
+}
+
+static inline int inat_has_second_immediate(insn_attr_t attr)
+{
+	return attr & INAT_SCNDIMM;
+}
+
+static inline int inat_has_moffset(insn_attr_t attr)
+{
+	return attr & INAT_MOFFSET;
+}
+
+static inline int inat_has_variant(insn_attr_t attr)
+{
+	return attr & INAT_VARIANT;
+}
+
+static inline int inat_accept_vex(insn_attr_t attr)
+{
+	return attr & INAT_VEXOK;
+}
+
+static inline int inat_must_vex(insn_attr_t attr)
+{
+	return attr & INAT_VEXONLY;
+}
+#endif
diff --git a/arch/x86/include/asm/inat_types.h b/arch/x86/include/asm/inat_types.h
new file mode 100644
index 000000000000..cb3c20ce39cf
--- /dev/null
+++ b/arch/x86/include/asm/inat_types.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_X86_INAT_TYPES_H
+#define _ASM_X86_INAT_TYPES_H
+/*
+ * x86 instruction attributes
+ *
+ * Written by Masami Hiramatsu <mhiramat@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+/* Instruction attributes */
+typedef unsigned int insn_attr_t;
+typedef unsigned char insn_byte_t;
+typedef signed int insn_value_t;
+
+#endif
diff --git a/arch/x86/include/asm/insn.h b/arch/x86/include/asm/insn.h
new file mode 100644
index 000000000000..96c2e0ad04ca
--- /dev/null
+++ b/arch/x86/include/asm/insn.h
@@ -0,0 +1,184 @@
+#ifndef _ASM_X86_INSN_H
+#define _ASM_X86_INSN_H
+/*
+ * x86 instruction analysis
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2009
+ */
+
+/* insn_attr_t is defined in inat.h */
+#include <asm/inat.h>
+
+struct insn_field {
+	union {
+		insn_value_t value;
+		insn_byte_t bytes[4];
+	};
+	/* !0 if we've run insn_get_xxx() for this field */
+	unsigned char got;
+	unsigned char nbytes;
+};
+
+struct insn {
+	struct insn_field prefixes;	/*
+					 * Prefixes
+					 * prefixes.bytes[3]: last prefix
+					 */
+	struct insn_field rex_prefix;	/* REX prefix */
+	struct insn_field vex_prefix;	/* VEX prefix */
+	struct insn_field opcode;	/*
+					 * opcode.bytes[0]: opcode1
+					 * opcode.bytes[1]: opcode2
+					 * opcode.bytes[2]: opcode3
+					 */
+	struct insn_field modrm;
+	struct insn_field sib;
+	struct insn_field displacement;
+	union {
+		struct insn_field immediate;
+		struct insn_field moffset1;	/* for 64bit MOV */
+		struct insn_field immediate1;	/* for 64bit imm or off16/32 */
+	};
+	union {
+		struct insn_field moffset2;	/* for 64bit MOV */
+		struct insn_field immediate2;	/* for 64bit imm or seg16 */
+	};
+
+	insn_attr_t attr;
+	unsigned char opnd_bytes;
+	unsigned char addr_bytes;
+	unsigned char length;
+	unsigned char x86_64;
+
+	const insn_byte_t *kaddr;	/* kernel address of insn to analyze */
+	const insn_byte_t *next_byte;
+};
+
+#define X86_MODRM_MOD(modrm) (((modrm) & 0xc0) >> 6)
+#define X86_MODRM_REG(modrm) (((modrm) & 0x38) >> 3)
+#define X86_MODRM_RM(modrm) ((modrm) & 0x07)
+
+#define X86_SIB_SCALE(sib) (((sib) & 0xc0) >> 6)
+#define X86_SIB_INDEX(sib) (((sib) & 0x38) >> 3)
+#define X86_SIB_BASE(sib) ((sib) & 0x07)
+
+#define X86_REX_W(rex) ((rex) & 8)
+#define X86_REX_R(rex) ((rex) & 4)
+#define X86_REX_X(rex) ((rex) & 2)
+#define X86_REX_B(rex) ((rex) & 1)
+
+/* VEX bit flags  */
+#define X86_VEX_W(vex)	((vex) & 0x80)	/* VEX3 Byte2 */
+#define X86_VEX_R(vex)	((vex) & 0x80)	/* VEX2/3 Byte1 */
+#define X86_VEX_X(vex)	((vex) & 0x40)	/* VEX3 Byte1 */
+#define X86_VEX_B(vex)	((vex) & 0x20)	/* VEX3 Byte1 */
+#define X86_VEX_L(vex)	((vex) & 0x04)	/* VEX3 Byte2, VEX2 Byte1 */
+/* VEX bit fields */
+#define X86_VEX3_M(vex)	((vex) & 0x1f)		/* VEX3 Byte1 */
+#define X86_VEX2_M	1			/* VEX2.M always 1 */
+#define X86_VEX_V(vex)	(((vex) & 0x78) >> 3)	/* VEX3 Byte2, VEX2 Byte1 */
+#define X86_VEX_P(vex)	((vex) & 0x03)		/* VEX3 Byte2, VEX2 Byte1 */
+#define X86_VEX_M_MAX	0x1f			/* VEX3.M Maximum value */
+
+/* The last prefix is needed for two-byte and three-byte opcodes */
+static inline insn_byte_t insn_last_prefix(struct insn *insn)
+{
+	return insn->prefixes.bytes[3];
+}
+
+extern void insn_init(struct insn *insn, const void *kaddr, int x86_64);
+extern void insn_get_prefixes(struct insn *insn);
+extern void insn_get_opcode(struct insn *insn);
+extern void insn_get_modrm(struct insn *insn);
+extern void insn_get_sib(struct insn *insn);
+extern void insn_get_displacement(struct insn *insn);
+extern void insn_get_immediate(struct insn *insn);
+extern void insn_get_length(struct insn *insn);
+
+/* Attribute will be determined after getting ModRM (for opcode groups) */
+static inline void insn_get_attribute(struct insn *insn)
+{
+	insn_get_modrm(insn);
+}
+
+/* Instruction uses RIP-relative addressing */
+extern int insn_rip_relative(struct insn *insn);
+
+/* Init insn for kernel text */
+static inline void kernel_insn_init(struct insn *insn, const void *kaddr)
+{
+#ifdef CONFIG_X86_64
+	insn_init(insn, kaddr, 1);
+#else /* CONFIG_X86_32 */
+	insn_init(insn, kaddr, 0);
+#endif
+}
+
+static inline int insn_is_avx(struct insn *insn)
+{
+	if (!insn->prefixes.got)
+		insn_get_prefixes(insn);
+	return (insn->vex_prefix.value != 0);
+}
+
+static inline insn_byte_t insn_vex_m_bits(struct insn *insn)
+{
+	if (insn->vex_prefix.nbytes == 2)	/* 2 bytes VEX */
+		return X86_VEX2_M;
+	else
+		return X86_VEX3_M(insn->vex_prefix.bytes[1]);
+}
+
+static inline insn_byte_t insn_vex_p_bits(struct insn *insn)
+{
+	if (insn->vex_prefix.nbytes == 2)	/* 2 bytes VEX */
+		return X86_VEX_P(insn->vex_prefix.bytes[1]);
+	else
+		return X86_VEX_P(insn->vex_prefix.bytes[2]);
+}
+
+/* Offset of each field from kaddr */
+static inline int insn_offset_rex_prefix(struct insn *insn)
+{
+	return insn->prefixes.nbytes;
+}
+static inline int insn_offset_vex_prefix(struct insn *insn)
+{
+	return insn_offset_rex_prefix(insn) + insn->rex_prefix.nbytes;
+}
+static inline int insn_offset_opcode(struct insn *insn)
+{
+	return insn_offset_vex_prefix(insn) + insn->vex_prefix.nbytes;
+}
+static inline int insn_offset_modrm(struct insn *insn)
+{
+	return insn_offset_opcode(insn) + insn->opcode.nbytes;
+}
+static inline int insn_offset_sib(struct insn *insn)
+{
+	return insn_offset_modrm(insn) + insn->modrm.nbytes;
+}
+static inline int insn_offset_displacement(struct insn *insn)
+{
+	return insn_offset_sib(insn) + insn->sib.nbytes;
+}
+static inline int insn_offset_immediate(struct insn *insn)
+{
+	return insn_offset_displacement(insn) + insn->displacement.nbytes;
+}
+
+#endif /* _ASM_X86_INSN_H */
diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h
new file mode 100644
index 000000000000..14cf526091f9
--- /dev/null
+++ b/arch/x86/include/asm/inst.h
@@ -0,0 +1,150 @@
+/*
+ * Generate .byte code for some instructions not supported by old
+ * binutils.
+ */
+#ifndef X86_ASM_INST_H
+#define X86_ASM_INST_H
+
+#ifdef __ASSEMBLY__
+
+	.macro XMM_NUM opd xmm
+	.ifc \xmm,%xmm0
+	\opd = 0
+	.endif
+	.ifc \xmm,%xmm1
+	\opd = 1
+	.endif
+	.ifc \xmm,%xmm2
+	\opd = 2
+	.endif
+	.ifc \xmm,%xmm3
+	\opd = 3
+	.endif
+	.ifc \xmm,%xmm4
+	\opd = 4
+	.endif
+	.ifc \xmm,%xmm5
+	\opd = 5
+	.endif
+	.ifc \xmm,%xmm6
+	\opd = 6
+	.endif
+	.ifc \xmm,%xmm7
+	\opd = 7
+	.endif
+	.ifc \xmm,%xmm8
+	\opd = 8
+	.endif
+	.ifc \xmm,%xmm9
+	\opd = 9
+	.endif
+	.ifc \xmm,%xmm10
+	\opd = 10
+	.endif
+	.ifc \xmm,%xmm11
+	\opd = 11
+	.endif
+	.ifc \xmm,%xmm12
+	\opd = 12
+	.endif
+	.ifc \xmm,%xmm13
+	\opd = 13
+	.endif
+	.ifc \xmm,%xmm14
+	\opd = 14
+	.endif
+	.ifc \xmm,%xmm15
+	\opd = 15
+	.endif
+	.endm
+
+	.macro PFX_OPD_SIZE
+	.byte 0x66
+	.endm
+
+	.macro PFX_REX opd1 opd2
+	.if (\opd1 | \opd2) & 8
+	.byte 0x40 | ((\opd1 & 8) >> 3) | ((\opd2 & 8) >> 1)
+	.endif
+	.endm
+
+	.macro MODRM mod opd1 opd2
+	.byte \mod | (\opd1 & 7) | ((\opd2 & 7) << 3)
+	.endm
+
+	.macro PSHUFB_XMM xmm1 xmm2
+	XMM_NUM pshufb_opd1 \xmm1
+	XMM_NUM pshufb_opd2 \xmm2
+	PFX_OPD_SIZE
+	PFX_REX pshufb_opd1 pshufb_opd2
+	.byte 0x0f, 0x38, 0x00
+	MODRM 0xc0 pshufb_opd1 pshufb_opd2
+	.endm
+
+	.macro PCLMULQDQ imm8 xmm1 xmm2
+	XMM_NUM clmul_opd1 \xmm1
+	XMM_NUM clmul_opd2 \xmm2
+	PFX_OPD_SIZE
+	PFX_REX clmul_opd1 clmul_opd2
+	.byte 0x0f, 0x3a, 0x44
+	MODRM 0xc0 clmul_opd1 clmul_opd2
+	.byte \imm8
+	.endm
+
+	.macro AESKEYGENASSIST rcon xmm1 xmm2
+	XMM_NUM aeskeygen_opd1 \xmm1
+	XMM_NUM aeskeygen_opd2 \xmm2
+	PFX_OPD_SIZE
+	PFX_REX aeskeygen_opd1 aeskeygen_opd2
+	.byte 0x0f, 0x3a, 0xdf
+	MODRM 0xc0 aeskeygen_opd1 aeskeygen_opd2
+	.byte \rcon
+	.endm
+
+	.macro AESIMC xmm1 xmm2
+	XMM_NUM aesimc_opd1 \xmm1
+	XMM_NUM aesimc_opd2 \xmm2
+	PFX_OPD_SIZE
+	PFX_REX aesimc_opd1 aesimc_opd2
+	.byte 0x0f, 0x38, 0xdb
+	MODRM 0xc0 aesimc_opd1 aesimc_opd2
+	.endm
+
+	.macro AESENC xmm1 xmm2
+	XMM_NUM aesenc_opd1 \xmm1
+	XMM_NUM aesenc_opd2 \xmm2
+	PFX_OPD_SIZE
+	PFX_REX aesenc_opd1 aesenc_opd2
+	.byte 0x0f, 0x38, 0xdc
+	MODRM 0xc0 aesenc_opd1 aesenc_opd2
+	.endm
+
+	.macro AESENCLAST xmm1 xmm2
+	XMM_NUM aesenclast_opd1 \xmm1
+	XMM_NUM aesenclast_opd2 \xmm2
+	PFX_OPD_SIZE
+	PFX_REX aesenclast_opd1 aesenclast_opd2
+	.byte 0x0f, 0x38, 0xdd
+	MODRM 0xc0 aesenclast_opd1 aesenclast_opd2
+	.endm
+
+	.macro AESDEC xmm1 xmm2
+	XMM_NUM aesdec_opd1 \xmm1
+	XMM_NUM aesdec_opd2 \xmm2
+	PFX_OPD_SIZE
+	PFX_REX aesdec_opd1 aesdec_opd2
+	.byte 0x0f, 0x38, 0xde
+	MODRM 0xc0 aesdec_opd1 aesdec_opd2
+	.endm
+
+	.macro AESDECLAST xmm1 xmm2
+	XMM_NUM aesdeclast_opd1 \xmm1
+	XMM_NUM aesdeclast_opd2 \xmm2
+	PFX_OPD_SIZE
+	PFX_REX aesdeclast_opd1 aesdeclast_opd2
+	.byte 0x0f, 0x38, 0xdf
+	MODRM 0xc0 aesdeclast_opd1 aesdeclast_opd2
+	.endm
+#endif
+
+#endif
diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h
index fd6d21bbee6c..345c99cef152 100644
--- a/arch/x86/include/asm/iommu.h
+++ b/arch/x86/include/asm/iommu.h
@@ -1,8 +1,6 @@
 #ifndef _ASM_X86_IOMMU_H
 #define _ASM_X86_IOMMU_H
 
-extern void pci_iommu_shutdown(void);
-extern void no_iommu_init(void);
 extern struct dma_map_ops nommu_dma_ops;
 extern int force_iommu, no_iommu;
 extern int iommu_detected;
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index ddda6cbed6f4..5458380b6ef8 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -34,9 +34,10 @@ static inline int irq_canonicalize(int irq)
 #ifdef CONFIG_HOTPLUG_CPU
 #include <linux/cpumask.h>
 extern void fixup_irqs(void);
+extern void irq_force_complete_move(int);
 #endif
 
-extern void (*generic_interrupt_extension)(void);
+extern void (*x86_platform_ipi_callback)(void);
 extern void native_init_IRQ(void);
 extern bool handle_irq(unsigned irq, struct pt_regs *regs);
 
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 5b21f0ec3df2..6a635bd39867 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -106,7 +106,7 @@
 /*
  * Generic system vector for platform specific use
  */
-#define GENERIC_INTERRUPT_VECTOR	0xed
+#define X86_PLATFORM_IPI_VECTOR		0xed
 
 /*
  * Performance monitoring pending work vector:
diff --git a/arch/x86/include/asm/k8.h b/arch/x86/include/asm/k8.h
index c2d1f3b58e5f..f70e60071fe8 100644
--- a/arch/x86/include/asm/k8.h
+++ b/arch/x86/include/asm/k8.h
@@ -4,13 +4,16 @@
 #include <linux/pci.h>
 
 extern struct pci_device_id k8_nb_ids[];
+struct bootnode;
 
 extern int early_is_k8_nb(u32 value);
 extern struct pci_dev **k8_northbridges;
 extern int num_k8_northbridges;
 extern int cache_k8_northbridges(void);
 extern void k8_flush_garts(void);
-extern int k8_scan_nodes(unsigned long start, unsigned long end);
+extern int k8_get_nodes(struct bootnode *nodes);
+extern int k8_numa_init(unsigned long start_pfn, unsigned long end_pfn);
+extern int k8_scan_nodes(void);
 
 #ifdef CONFIG_K8_NB
 static inline struct pci_dev *node_to_k8_nb_misc(int node)
diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index 4a5fe914dc59..950df434763f 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -19,6 +19,8 @@
 #define __KVM_HAVE_MSIX
 #define __KVM_HAVE_MCE
 #define __KVM_HAVE_PIT_STATE2
+#define __KVM_HAVE_XEN_HVM
+#define __KVM_HAVE_VCPU_EVENTS
 
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
@@ -79,6 +81,7 @@ struct kvm_ioapic_state {
 #define KVM_IRQCHIP_PIC_MASTER   0
 #define KVM_IRQCHIP_PIC_SLAVE    1
 #define KVM_IRQCHIP_IOAPIC       2
+#define KVM_NR_IRQCHIPS          3
 
 /* for KVM_GET_REGS and KVM_SET_REGS */
 struct kvm_regs {
@@ -250,4 +253,31 @@ struct kvm_reinject_control {
 	__u8 pit_reinject;
 	__u8 reserved[31];
 };
+
+/* for KVM_GET/SET_VCPU_EVENTS */
+struct kvm_vcpu_events {
+	struct {
+		__u8 injected;
+		__u8 nr;
+		__u8 has_error_code;
+		__u8 pad;
+		__u32 error_code;
+	} exception;
+	struct {
+		__u8 injected;
+		__u8 nr;
+		__u8 soft;
+		__u8 pad;
+	} interrupt;
+	struct {
+		__u8 injected;
+		__u8 pending;
+		__u8 masked;
+		__u8 pad;
+	} nmi;
+	__u32 sipi_vector;
+	__u32 flags;
+	__u32 reserved[10];
+};
+
 #endif /* _ASM_X86_KVM_H */
diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index b7ed2c423116..7c18e1230f54 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -129,7 +129,7 @@ struct decode_cache {
 	u8 seg_override;
 	unsigned int d;
 	unsigned long regs[NR_VCPU_REGS];
-	unsigned long eip;
+	unsigned long eip, eip_orig;
 	/* modrm */
 	u8 modrm;
 	u8 modrm_mod;
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index d83892226f73..4f865e8b8540 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -354,7 +354,6 @@ struct kvm_vcpu_arch {
 	unsigned int time_offset;
 	struct page *time_page;
 
-	bool singlestep; /* guest is single stepped by KVM */
 	bool nmi_pending;
 	bool nmi_injected;
 
@@ -371,6 +370,10 @@ struct kvm_vcpu_arch {
 	u64 mcg_status;
 	u64 mcg_ctl;
 	u64 *mce_banks;
+
+	/* used for guest single stepping over the given code position */
+	u16 singlestep_cs;
+	unsigned long singlestep_rip;
 };
 
 struct kvm_mem_alias {
@@ -397,7 +400,6 @@ struct kvm_arch{
 	struct kvm_pic *vpic;
 	struct kvm_ioapic *vioapic;
 	struct kvm_pit *vpit;
-	struct hlist_head irq_ack_notifier_list;
 	int vapics_in_nmi_mode;
 
 	unsigned int tss_addr;
@@ -410,8 +412,10 @@ struct kvm_arch{
 	gpa_t ept_identity_map_addr;
 
 	unsigned long irq_sources_bitmap;
-	unsigned long irq_states[KVM_IOAPIC_NUM_PINS];
 	u64 vm_init_tsc;
+	s64 kvmclock_offset;
+
+	struct kvm_xen_hvm_config xen_hvm_config;
 };
 
 struct kvm_vm_stat {
@@ -461,7 +465,7 @@ struct descriptor_table {
 struct kvm_x86_ops {
 	int (*cpu_has_kvm_support)(void);          /* __init */
 	int (*disabled_by_bios)(void);             /* __init */
-	void (*hardware_enable)(void *dummy);      /* __init */
+	int (*hardware_enable)(void *dummy);
 	void (*hardware_disable)(void *dummy);
 	void (*check_processor_compatibility)(void *rtn);
 	int (*hardware_setup)(void);               /* __init */
@@ -477,8 +481,8 @@ struct kvm_x86_ops {
 	void (*vcpu_load)(struct kvm_vcpu *vcpu, int cpu);
 	void (*vcpu_put)(struct kvm_vcpu *vcpu);
 
-	int (*set_guest_debug)(struct kvm_vcpu *vcpu,
-			       struct kvm_guest_debug *dbg);
+	void (*set_guest_debug)(struct kvm_vcpu *vcpu,
+				struct kvm_guest_debug *dbg);
 	int (*get_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
 	int (*set_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
 	u64 (*get_segment_base)(struct kvm_vcpu *vcpu, int seg);
@@ -506,8 +510,8 @@ struct kvm_x86_ops {
 
 	void (*tlb_flush)(struct kvm_vcpu *vcpu);
 
-	void (*run)(struct kvm_vcpu *vcpu, struct kvm_run *run);
-	int (*handle_exit)(struct kvm_run *run, struct kvm_vcpu *vcpu);
+	void (*run)(struct kvm_vcpu *vcpu);
+	int (*handle_exit)(struct kvm_vcpu *vcpu);
 	void (*skip_emulated_instruction)(struct kvm_vcpu *vcpu);
 	void (*set_interrupt_shadow)(struct kvm_vcpu *vcpu, int mask);
 	u32 (*get_interrupt_shadow)(struct kvm_vcpu *vcpu, int mask);
@@ -519,6 +523,8 @@ struct kvm_x86_ops {
 				bool has_error_code, u32 error_code);
 	int (*interrupt_allowed)(struct kvm_vcpu *vcpu);
 	int (*nmi_allowed)(struct kvm_vcpu *vcpu);
+	bool (*get_nmi_mask)(struct kvm_vcpu *vcpu);
+	void (*set_nmi_mask)(struct kvm_vcpu *vcpu, bool masked);
 	void (*enable_nmi_window)(struct kvm_vcpu *vcpu);
 	void (*enable_irq_window)(struct kvm_vcpu *vcpu);
 	void (*update_cr8_intercept)(struct kvm_vcpu *vcpu, int tpr, int irr);
@@ -568,7 +574,7 @@ enum emulation_result {
 #define EMULTYPE_NO_DECODE	    (1 << 0)
 #define EMULTYPE_TRAP_UD	    (1 << 1)
 #define EMULTYPE_SKIP		    (1 << 2)
-int emulate_instruction(struct kvm_vcpu *vcpu, struct kvm_run *run,
+int emulate_instruction(struct kvm_vcpu *vcpu,
 			unsigned long cr2, u16 error_code, int emulation_type);
 void kvm_report_emulation_failure(struct kvm_vcpu *cvpu, const char *context);
 void realmode_lgdt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
@@ -585,9 +591,9 @@ int kvm_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
 
 struct x86_emulate_ctxt;
 
-int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
+int kvm_emulate_pio(struct kvm_vcpu *vcpu, int in,
 		     int size, unsigned port);
-int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
+int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, int in,
 			   int size, unsigned long count, int down,
 			    gva_t address, int rep, unsigned port);
 void kvm_emulate_cpuid(struct kvm_vcpu *vcpu);
@@ -616,6 +622,9 @@ void kvm_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l);
 int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata);
 int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data);
 
+unsigned long kvm_get_rflags(struct kvm_vcpu *vcpu);
+void kvm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags);
+
 void kvm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr);
 void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
 void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long cr2,
@@ -802,4 +811,7 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu);
 int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu);
 int kvm_cpu_get_interrupt(struct kvm_vcpu *v);
 
+void kvm_define_shared_msr(unsigned index, u32 msr);
+void kvm_set_shared_msr(unsigned index, u64 val, u64 mask);
+
 #endif /* _ASM_X86_KVM_HOST_H */
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index f1363b72364f..858baa061cfc 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -108,6 +108,8 @@ struct mce_log {
 #define K8_MCE_THRESHOLD_BANK_5    (MCE_THRESHOLD_BASE + 5 * 9)
 #define K8_MCE_THRESHOLD_DRAM_ECC  (MCE_THRESHOLD_BANK_4 + 0)
 
+extern struct atomic_notifier_head x86_mce_decoder_chain;
+
 #ifdef __KERNEL__
 
 #include <linux/percpu.h>
@@ -118,9 +120,11 @@ extern int mce_disabled;
 extern int mce_p5_enabled;
 
 #ifdef CONFIG_X86_MCE
-void mcheck_init(struct cpuinfo_x86 *c);
+int mcheck_init(void);
+void mcheck_cpu_init(struct cpuinfo_x86 *c);
 #else
-static inline void mcheck_init(struct cpuinfo_x86 *c) {}
+static inline int mcheck_init(void) { return 0; }
+static inline void mcheck_cpu_init(struct cpuinfo_x86 *c) {}
 #endif
 
 #ifdef CONFIG_X86_ANCIENT_MCE
@@ -214,5 +218,11 @@ void intel_init_thermal(struct cpuinfo_x86 *c);
 
 void mce_log_therm_throt_event(__u64 status);
 
+#ifdef CONFIG_X86_THERMAL_VECTOR
+extern void mcheck_intel_therm_init(void);
+#else
+static inline void mcheck_intel_therm_init(void) { }
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index ef51b501e22a..c24ca9a56458 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -12,6 +12,8 @@ struct device;
 enum ucode_state { UCODE_ERROR, UCODE_OK, UCODE_NFOUND };
 
 struct microcode_ops {
+	void (*init)(struct device *device);
+	void (*fini)(void);
 	enum ucode_state (*request_microcode_user) (int cpu,
 				const void __user *buf, size_t size);
 
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
index ede6998bd92c..91df7c51806c 100644
--- a/arch/x86/include/asm/mmzone_32.h
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -47,7 +47,7 @@ static inline void resume_map_numa_kva(pgd_t *pgd) {}
 /*
  * generic node memory support, the following assumptions apply:
  *
- * 1) memory comes in 64Mb contigious chunks which are either present or not
+ * 1) memory comes in 64Mb contiguous chunks which are either present or not
  * 2) we will not have more than 64Gb in total
  *
  * for now assume that 64Gb is max amount of RAM for whole system
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 79c94500c0bb..d8bf23a88d05 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -71,12 +71,7 @@ static inline void early_get_smp_config(void)
 
 static inline void find_smp_config(void)
 {
-	x86_init.mpparse.find_smp_config(1);
-}
-
-static inline void early_find_smp_config(void)
-{
-	x86_init.mpparse.find_smp_config(0);
+	x86_init.mpparse.find_smp_config();
 }
 
 #ifdef CONFIG_X86_MPPARSE
@@ -89,7 +84,7 @@ extern void default_mpc_oem_bus_info(struct mpc_bus *m, char *str);
 # else
 #  define default_mpc_oem_bus_info NULL
 # endif
-extern void default_find_smp_config(unsigned int reserve);
+extern void default_find_smp_config(void);
 extern void default_get_smp_config(unsigned int early);
 #else
 static inline void early_reserve_e820_mpc_new(void) { }
@@ -97,7 +92,7 @@ static inline void early_reserve_e820_mpc_new(void) { }
 #define default_mpc_apic_id NULL
 #define default_smp_read_mpc_oem NULL
 #define default_mpc_oem_bus_info NULL
-#define default_find_smp_config x86_init_uint_noop
+#define default_find_smp_config x86_init_noop
 #define default_get_smp_config x86_init_uint_noop
 #endif
 
@@ -163,14 +158,16 @@ typedef struct physid_mask physid_mask_t;
 #define physids_shift_left(d, s, n)				\
 	bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
 
-#define physids_coerce(map)			((map).mask[0])
+static inline unsigned long physids_coerce(physid_mask_t *map)
+{
+	return map->mask[0];
+}
 
-#define physids_promote(physids)					\
-	({								\
-		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
-		__physid_mask.mask[0] = physids;			\
-		__physid_mask;						\
-	})
+static inline void physids_promote(unsigned long physids, physid_mask_t *map)
+{
+	physids_clear(*map);
+	map->mask[0] = physids;
+}
 
 /* Note: will create very large stack frames if physid_mask_t is big */
 #define physid_mask_of_physid(physid)					\
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 7e2b6ba962ff..5bef931f8b14 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -247,8 +247,8 @@ do {                                                            \
 #ifdef CONFIG_SMP
 int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
-void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs);
-void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs);
+void rdmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs);
+void wrmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs);
 int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
 int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]);
@@ -264,12 +264,12 @@ static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 	wrmsr(msr_no, l, h);
 	return 0;
 }
-static inline void rdmsr_on_cpus(const cpumask_t *m, u32 msr_no,
+static inline void rdmsr_on_cpus(const struct cpumask *m, u32 msr_no,
 				struct msr *msrs)
 {
        rdmsr_on_cpu(0, msr_no, &(msrs[0].l), &(msrs[0].h));
 }
-static inline void wrmsr_on_cpus(const cpumask_t *m, u32 msr_no,
+static inline void wrmsr_on_cpus(const struct cpumask *m, u32 msr_no,
 				struct msr *msrs)
 {
        wrmsr_on_cpu(0, msr_no, msrs[0].l, msrs[0].h);
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index 6473f5ccff85..642fe34b36a2 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -49,7 +49,8 @@ extern unsigned long max_pfn_mapped;
 extern unsigned long init_memory_mapping(unsigned long start,
 					 unsigned long end);
 
-extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn,
+				int acpi, int k8);
 extern void free_initmem(void);
 
 #endif	/* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index b399988eee3a..b4bf9a942ed0 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -118,11 +118,27 @@ extern int __init pcibios_init(void);
 
 /* pci-mmconfig.c */
 
+/* "PCI MMCONFIG %04x [bus %02x-%02x]" */
+#define PCI_MMCFG_RESOURCE_NAME_LEN (22 + 4 + 2 + 2)
+
+struct pci_mmcfg_region {
+	struct list_head list;
+	struct resource res;
+	u64 address;
+	char __iomem *virt;
+	u16 segment;
+	u8 start_bus;
+	u8 end_bus;
+	char name[PCI_MMCFG_RESOURCE_NAME_LEN];
+};
+
 extern int __init pci_mmcfg_arch_init(void);
 extern void __init pci_mmcfg_arch_free(void);
+extern struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus);
+
+extern struct list_head pci_mmcfg_list;
 
-extern struct acpi_mcfg_allocation *pci_mmcfg_config;
-extern int pci_mmcfg_config_num;
+#define PCI_MMCFG_BUS_OFFSET(bus)      ((bus) << 20)
 
 /*
  * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index ad7ce3fd5065..8d9f8548a870 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -28,9 +28,20 @@
  */
 #define ARCH_PERFMON_EVENT_MASK				    0xffff
 
+/*
+ * filter mask to validate fixed counter events.
+ * the following filters disqualify for fixed counters:
+ *  - inv
+ *  - edge
+ *  - cnt-mask
+ *  The other filters are supported by fixed counters.
+ *  The any-thread option is supported starting with v3.
+ */
+#define ARCH_PERFMON_EVENT_FILTER_MASK			0xff840000
+
 #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL		      0x3c
 #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK		(0x00 << 8)
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX 		 0
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX			 0
 #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \
 		(1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
 
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index af6fd360ab35..a34c785c5a63 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -16,6 +16,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/x86_init.h>
+
 /*
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
@@ -270,9 +272,9 @@ static inline int is_new_memtype_allowed(u64 paddr, unsigned long size,
 					 unsigned long new_flags)
 {
 	/*
-	 * PAT type is always WB for ISA. So no need to check.
+	 * PAT type is always WB for untracked ranges, so no need to check.
 	 */
-	if (is_ISA_range(paddr, paddr + size - 1))
+	if (x86_platform.is_untracked_pat_range(paddr, paddr + size))
 		return 1;
 
 	/*
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index c9786480f0fe..6f8ec1c37e0a 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -30,6 +30,7 @@ struct mm_struct;
 #include <linux/math64.h>
 #include <linux/init.h>
 
+#define HBP_NUM 4
 /*
  * Default implementation of macro that returns current
  * instruction pointer ("program counter").
@@ -422,6 +423,8 @@ extern unsigned int xstate_size;
 extern void free_thread_xstate(struct task_struct *);
 extern struct kmem_cache *task_xstate_cachep;
 
+struct perf_event;
+
 struct thread_struct {
 	/* Cached TLS descriptors: */
 	struct desc_struct	tls_array[GDT_ENTRY_TLS_ENTRIES];
@@ -443,13 +446,10 @@ struct thread_struct {
 	unsigned long		fs;
 #endif
 	unsigned long		gs;
-	/* Hardware debugging registers: */
-	unsigned long		debugreg0;
-	unsigned long		debugreg1;
-	unsigned long		debugreg2;
-	unsigned long		debugreg3;
-	unsigned long		debugreg6;
-	unsigned long		debugreg7;
+	/* Save middle states of ptrace breakpoints */
+	struct perf_event	*ptrace_bps[HBP_NUM];
+	/* Debug status used for traps, single steps, etc... */
+	unsigned long           debugreg6;
 	/* Fault info: */
 	unsigned long		cr2;
 	unsigned long		trap_no;
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index 621f56d73121..4009f6534f52 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -5,18 +5,19 @@
 
 /* misc architecture specific prototypes */
 
-extern void early_idt_handler(void);
+void early_idt_handler(void);
 
-extern void system_call(void);
-extern void syscall_init(void);
+void system_call(void);
+void syscall_init(void);
 
-extern void ia32_syscall(void);
-extern void ia32_cstar_target(void);
-extern void ia32_sysenter_target(void);
+void ia32_syscall(void);
+void ia32_cstar_target(void);
+void ia32_sysenter_target(void);
 
-extern void syscall32_cpu_init(void);
+void syscall32_cpu_init(void);
 
-extern void check_efer(void);
+void x86_configure_nx(void);
+void x86_report_nx(void);
 
 extern int reboot_force;
 
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index 0f0d908349aa..3d11fd0f44c5 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -7,6 +7,7 @@
 
 #ifdef __KERNEL__
 #include <asm/segment.h>
+#include <asm/page_types.h>
 #endif
 
 #ifndef __ASSEMBLY__
@@ -216,6 +217,67 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
 	return regs->sp;
 }
 
+/* Query offset/name of register from its name/offset */
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+#define MAX_REG_OFFSET (offsetof(struct pt_regs, ss))
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	pt_regs from which register value is gotten.
+ * @offset:	offset number of the register.
+ *
+ * regs_get_register returns the value of a register. The @offset is the
+ * offset of the register in struct pt_regs address which specified by @regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @addr:	address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+static inline int regs_within_kernel_stack(struct pt_regs *regs,
+					   unsigned long addr)
+{
+	return ((addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+						      unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
+
+/* Get Nth argument at function call */
+extern unsigned long regs_get_argument_nth(struct pt_regs *regs,
+					   unsigned int n);
+
 /*
  * These are defined as per linux/ptrace.h, which see.
  */
diff --git a/arch/x86/include/asm/sections.h b/arch/x86/include/asm/sections.h
index 1b7ee5d673c2..0a5242428659 100644
--- a/arch/x86/include/asm/sections.h
+++ b/arch/x86/include/asm/sections.h
@@ -2,7 +2,13 @@
 #define _ASM_X86_SECTIONS_H
 
 #include <asm-generic/sections.h>
+#include <asm/uaccess.h>
 
 extern char __brk_base[], __brk_limit[];
+extern struct exception_table_entry __stop___ex_table[];
+
+#if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
+extern char __end_rodata_hpage_align[];
+#endif
 
 #endif	/* _ASM_X86_SECTIONS_H */
diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h
index 72e5a4491661..04459d25e66e 100644
--- a/arch/x86/include/asm/sigcontext.h
+++ b/arch/x86/include/asm/sigcontext.h
@@ -124,7 +124,7 @@ struct sigcontext {
 	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
 	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
 	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
-	 * of extended memory layout. See comments at the defintion of
+	 * of extended memory layout. See comments at the definition of
 	 * (struct _fpx_sw_bytes)
 	 */
 	void __user *fpstate;		/* zero when no FPU/extended context */
@@ -219,7 +219,7 @@ struct sigcontext {
 	 * fpstate is really (struct _fpstate *) or (struct _xstate *)
 	 * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
 	 * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
-	 * of extended memory layout. See comments at the defintion of
+	 * of extended memory layout. See comments at the definition of
 	 * (struct _fpx_sw_bytes)
 	 */
 	void __user *fpstate;		/* zero when no FPU/extended context */
diff --git a/arch/x86/include/asm/string_32.h b/arch/x86/include/asm/string_32.h
index ae907e617181..3d3e8353ee5c 100644
--- a/arch/x86/include/asm/string_32.h
+++ b/arch/x86/include/asm/string_32.h
@@ -177,10 +177,15 @@ static inline void *__memcpy3d(void *to, const void *from, size_t len)
  */
 
 #ifndef CONFIG_KMEMCHECK
+
+#if (__GNUC__ >= 4)
+#define memcpy(t, f, n) __builtin_memcpy(t, f, n)
+#else
 #define memcpy(t, f, n)				\
 	(__builtin_constant_p((n))		\
 	 ? __constant_memcpy((t), (f), (n))	\
 	 : __memcpy((t), (f), (n)))
+#endif
 #else
 /*
  * kmemcheck becomes very happy if we use the REP instructions unconditionally,
@@ -316,11 +321,15 @@ void *__constant_c_and_count_memset(void *s, unsigned long pattern,
 	 : __memset_generic((s), (c), (count)))
 
 #define __HAVE_ARCH_MEMSET
+#if (__GNUC__ >= 4)
+#define memset(s, c, count) __builtin_memset(s, c, count)
+#else
 #define memset(s, c, count)						\
 	(__builtin_constant_p(c)					\
 	 ? __constant_c_x_memset((s), (0x01010101UL * (unsigned char)(c)), \
 				 (count))				\
 	 : __memset((s), (c), (count)))
+#endif
 
 /*
  * find the first occurrence of byte 'c', or 1 past the area if none
diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index 85574b7c1bc1..1fecb7e61130 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -57,7 +57,8 @@ struct __attribute__ ((__packed__)) vmcb_control_area {
 	u16 intercept_dr_write;
 	u32 intercept_exceptions;
 	u64 intercept;
-	u8 reserved_1[44];
+	u8 reserved_1[42];
+	u16 pause_filter_count;
 	u64 iopm_base_pa;
 	u64 msrpm_base_pa;
 	u64 tsc_offset;
diff --git a/arch/x86/include/asm/swiotlb.h b/arch/x86/include/asm/swiotlb.h
index b9e4e20174fb..87ffcb12a1b8 100644
--- a/arch/x86/include/asm/swiotlb.h
+++ b/arch/x86/include/asm/swiotlb.h
@@ -3,17 +3,14 @@
 
 #include <linux/swiotlb.h>
 
-/* SWIOTLB interface */
-
-extern int swiotlb_force;
-
 #ifdef CONFIG_SWIOTLB
 extern int swiotlb;
-extern void pci_swiotlb_init(void);
+extern int pci_swiotlb_init(void);
 #else
 #define swiotlb 0
-static inline void pci_swiotlb_init(void)
+static inline int pci_swiotlb_init(void)
 {
+	return 0;
 }
 #endif
 
diff --git a/arch/x86/include/asm/sys_ia32.h b/arch/x86/include/asm/sys_ia32.h
index 72a6dcd1299b..4a5a089e1c62 100644
--- a/arch/x86/include/asm/sys_ia32.h
+++ b/arch/x86/include/asm/sys_ia32.h
@@ -51,20 +51,12 @@ asmlinkage long sys32_sched_rr_get_interval(compat_pid_t,
 asmlinkage long sys32_rt_sigpending(compat_sigset_t __user *, compat_size_t);
 asmlinkage long sys32_rt_sigqueueinfo(int, int, compat_siginfo_t __user *);
 
-#ifdef CONFIG_SYSCTL_SYSCALL
-struct sysctl_ia32;
-asmlinkage long sys32_sysctl(struct sysctl_ia32 __user *);
-#endif
-
 asmlinkage long sys32_pread(unsigned int, char __user *, u32, u32, u32);
 asmlinkage long sys32_pwrite(unsigned int, char __user *, u32, u32, u32);
 
 asmlinkage long sys32_personality(unsigned long);
 asmlinkage long sys32_sendfile(int, int, compat_off_t __user *, s32);
 
-asmlinkage long sys32_mmap2(unsigned long, unsigned long, unsigned long,
-			    unsigned long, unsigned long, unsigned long);
-
 struct oldold_utsname;
 struct old_utsname;
 asmlinkage long sys32_olduname(struct oldold_utsname __user *);
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 372b76edd63f..1bb6e395881c 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -55,8 +55,6 @@ struct sel_arg_struct;
 struct oldold_utsname;
 struct old_utsname;
 
-asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long,
-			  unsigned long, unsigned long, unsigned long);
 asmlinkage int old_mmap(struct mmap_arg_struct __user *);
 asmlinkage int old_select(struct sel_arg_struct __user *);
 asmlinkage int sys_ipc(uint, int, int, int, void __user *, long);
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index f08f97374892..ecb544e65382 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -23,6 +23,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
 struct tss_struct;
 void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 		      struct tss_struct *tss);
+extern void show_regs_common(void);
 
 #ifdef CONFIG_X86_32
 
@@ -128,8 +129,6 @@ do {									\
 	     "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */	  \
 	     "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */	  \
 	     "call __switch_to\n\t"					  \
-	     ".globl thread_return\n"					  \
-	     "thread_return:\n\t"					  \
 	     "movq "__percpu_arg([current_task])",%%rsi\n\t"		  \
 	     __switch_canary						  \
 	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
@@ -157,19 +156,22 @@ extern void native_load_gs_index(unsigned);
  * Load a segment. Fall back on loading the zero
  * segment if something goes wrong..
  */
-#define loadsegment(seg, value)			\
-	asm volatile("\n"			\
-		     "1:\t"			\
-		     "movl %k0,%%" #seg "\n"	\
-		     "2:\n"			\
-		     ".section .fixup,\"ax\"\n"	\
-		     "3:\t"			\
-		     "movl %k1, %%" #seg "\n\t"	\
-		     "jmp 2b\n"			\
-		     ".previous\n"		\
-		     _ASM_EXTABLE(1b,3b)	\
-		     : :"r" (value), "r" (0) : "memory")
-
+#define loadsegment(seg, value)						\
+do {									\
+	unsigned short __val = (value);					\
+									\
+	asm volatile("						\n"	\
+		     "1:	movl %k0,%%" #seg "		\n"	\
+									\
+		     ".section .fixup,\"ax\"			\n"	\
+		     "2:	xorl %k0,%k0			\n"	\
+		     "		jmp 1b				\n"	\
+		     ".previous					\n"	\
+									\
+		     _ASM_EXTABLE(1b, 2b)				\
+									\
+		     : "+r" (__val) : : "memory");			\
+} while (0)
 
 /*
  * Save a segment register away
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index d27d0a2fec4c..375c917c37d2 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -83,6 +83,7 @@ struct thread_info {
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_SECCOMP		8	/* secure computing */
 #define TIF_MCE_NOTIFY		10	/* notify userspace of an MCE */
+#define TIF_USER_RETURN_NOTIFY	11	/* notify kernel of userspace return */
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
 #define TIF_IA32		17	/* 32bit process */
 #define TIF_FORK		18	/* ret_from_fork */
@@ -107,6 +108,7 @@ struct thread_info {
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_MCE_NOTIFY		(1 << TIF_MCE_NOTIFY)
+#define _TIF_USER_RETURN_NOTIFY	(1 << TIF_USER_RETURN_NOTIFY)
 #define _TIF_NOTSC		(1 << TIF_NOTSC)
 #define _TIF_IA32		(1 << TIF_IA32)
 #define _TIF_FORK		(1 << TIF_FORK)
@@ -142,13 +144,14 @@ struct thread_info {
 
 /* Only used for 64 bit */
 #define _TIF_DO_NOTIFY_MASK						\
-	(_TIF_SIGPENDING|_TIF_MCE_NOTIFY|_TIF_NOTIFY_RESUME)
+	(_TIF_SIGPENDING | _TIF_MCE_NOTIFY | _TIF_NOTIFY_RESUME |	\
+	 _TIF_USER_RETURN_NOTIFY)
 
 /* flags to check in __switch_to() */
 #define _TIF_WORK_CTXSW							\
 	(_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_NOTSC)
 
-#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW
+#define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY)
 #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG)
 
 #define PREEMPT_ACTIVE		0x10000000
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index d2c6c930b491..abd3e0ea762a 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -570,7 +570,6 @@ extern struct movsl_mask {
 #ifdef CONFIG_X86_32
 # include "uaccess_32.h"
 #else
-# define ARCH_HAS_SEARCH_EXTABLE
 # include "uaccess_64.h"
 #endif
 
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index 632fb44b4cb5..0c9825e97f36 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -187,9 +187,34 @@ __copy_from_user_inatomic_nocache(void *to, const void __user *from,
 
 unsigned long __must_check copy_to_user(void __user *to,
 					const void *from, unsigned long n);
-unsigned long __must_check copy_from_user(void *to,
+unsigned long __must_check _copy_from_user(void *to,
 					  const void __user *from,
 					  unsigned long n);
+
+
+extern void copy_from_user_overflow(void)
+#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
+	__compiletime_error("copy_from_user() buffer size is not provably correct")
+#else
+	__compiletime_warning("copy_from_user() buffer size is not provably correct")
+#endif
+;
+
+static inline unsigned long __must_check copy_from_user(void *to,
+					  const void __user *from,
+					  unsigned long n)
+{
+	int sz = __compiletime_object_size(to);
+	int ret = -EFAULT;
+
+	if (likely(sz == -1 || sz >= n))
+		ret = _copy_from_user(to, from, n);
+	else
+		copy_from_user_overflow();
+
+	return ret;
+}
+
 long __must_check strncpy_from_user(char *dst, const char __user *src,
 				    long count);
 long __must_check __strncpy_from_user(char *dst,
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index db24b215fc50..46324c6a4f6e 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -19,12 +19,37 @@ __must_check unsigned long
 copy_user_generic(void *to, const void *from, unsigned len);
 
 __must_check unsigned long
-copy_to_user(void __user *to, const void *from, unsigned len);
+_copy_to_user(void __user *to, const void *from, unsigned len);
 __must_check unsigned long
-copy_from_user(void *to, const void __user *from, unsigned len);
+_copy_from_user(void *to, const void __user *from, unsigned len);
 __must_check unsigned long
 copy_in_user(void __user *to, const void __user *from, unsigned len);
 
+static inline unsigned long __must_check copy_from_user(void *to,
+					  const void __user *from,
+					  unsigned long n)
+{
+	int sz = __compiletime_object_size(to);
+	int ret = -EFAULT;
+
+	might_fault();
+	if (likely(sz == -1 || sz >= n))
+		ret = _copy_from_user(to, from, n);
+#ifdef CONFIG_DEBUG_VM
+	else
+		WARN(1, "Buffer overflow detected!\n");
+#endif
+	return ret;
+}
+
+static __always_inline __must_check
+int copy_to_user(void __user *dst, const void *src, unsigned size)
+{
+	might_fault();
+
+	return _copy_to_user(dst, src, size);
+}
+
 static __always_inline __must_check
 int __copy_from_user(void *dst, const void __user *src, unsigned size)
 {
@@ -176,8 +201,11 @@ __must_check long strlen_user(const char __user *str);
 __must_check unsigned long clear_user(void __user *mem, unsigned long len);
 __must_check unsigned long __clear_user(void __user *mem, unsigned long len);
 
-__must_check long __copy_from_user_inatomic(void *dst, const void __user *src,
-					    unsigned size);
+static __must_check __always_inline int
+__copy_from_user_inatomic(void *dst, const void __user *src, unsigned size)
+{
+	return copy_user_generic(dst, (__force const void *)src, size);
+}
 
 static __must_check __always_inline int
 __copy_to_user_inatomic(void __user *dst, const void *src, unsigned size)
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index 6fb3c209a7e3..3baf379fa840 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -342,10 +342,11 @@
 #define __NR_pwritev		334
 #define __NR_rt_tgsigqueueinfo	335
 #define __NR_perf_event_open	336
+#define __NR_recvmmsg		337
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 337
+#define NR_syscalls 338
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index 8d3ad0adbc68..4843f7ba754a 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -661,6 +661,8 @@ __SYSCALL(__NR_pwritev, sys_pwritev)
 __SYSCALL(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo)
 #define __NR_perf_event_open			298
 __SYSCALL(__NR_perf_event_open, sys_perf_event_open)
+#define __NR_recvmmsg				299
+__SYSCALL(__NR_recvmmsg, sys_recvmmsg)
 
 #ifndef __NO_STUBS
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 80e2984f521c..b414d2b401f6 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -55,7 +55,7 @@
 #define DESC_STATUS_SOURCE_TIMEOUT	3
 
 /*
- * source side threshholds at which message retries print a warning
+ * source side thresholds at which message retries print a warning
  */
 #define SOURCE_TIMEOUT_LIMIT		20
 #define DESTINATION_TIMEOUT_LIMIT	20
diff --git a/arch/x86/include/asm/uv/uv_irq.h b/arch/x86/include/asm/uv/uv_irq.h
index 9613c8c0b647..d6b17c760622 100644
--- a/arch/x86/include/asm/uv/uv_irq.h
+++ b/arch/x86/include/asm/uv/uv_irq.h
@@ -25,12 +25,14 @@ struct uv_IO_APIC_route_entry {
 		dest		: 32;
 };
 
-extern struct irq_chip uv_irq_chip;
-
-extern int arch_enable_uv_irq(char *, unsigned int, int, int, unsigned long);
-extern void arch_disable_uv_irq(int, unsigned long);
+enum {
+	UV_AFFINITY_ALL,
+	UV_AFFINITY_NODE,
+	UV_AFFINITY_CPU
+};
 
-extern int uv_setup_irq(char *, int, int, unsigned long);
-extern void uv_teardown_irq(unsigned int, int, unsigned long);
+extern int uv_irq_2_mmr_info(int, unsigned long *, int *);
+extern int uv_setup_irq(char *, int, int, unsigned long, int);
+extern void uv_teardown_irq(unsigned int);
 
 #endif /* _ASM_X86_UV_UV_IRQ_H */
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index 272514c2d456..2b4945419a84 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -56,6 +56,7 @@
 #define SECONDARY_EXEC_ENABLE_VPID              0x00000020
 #define SECONDARY_EXEC_WBINVD_EXITING		0x00000040
 #define SECONDARY_EXEC_UNRESTRICTED_GUEST	0x00000080
+#define SECONDARY_EXEC_PAUSE_LOOP_EXITING	0x00000400
 
 
 #define PIN_BASED_EXT_INTR_MASK                 0x00000001
@@ -144,6 +145,8 @@ enum vmcs_field {
 	VM_ENTRY_INSTRUCTION_LEN        = 0x0000401a,
 	TPR_THRESHOLD                   = 0x0000401c,
 	SECONDARY_VM_EXEC_CONTROL       = 0x0000401e,
+	PLE_GAP                         = 0x00004020,
+	PLE_WINDOW                      = 0x00004022,
 	VM_INSTRUCTION_ERROR            = 0x00004400,
 	VM_EXIT_REASON                  = 0x00004402,
 	VM_EXIT_INTR_INFO               = 0x00004404,
@@ -248,6 +251,7 @@ enum vmcs_field {
 #define EXIT_REASON_MSR_READ            31
 #define EXIT_REASON_MSR_WRITE           32
 #define EXIT_REASON_MWAIT_INSTRUCTION   36
+#define EXIT_REASON_PAUSE_INSTRUCTION   40
 #define EXIT_REASON_MCE_DURING_VMENTRY	 41
 #define EXIT_REASON_TPR_BELOW_THRESHOLD 43
 #define EXIT_REASON_APIC_ACCESS         44
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 2c756fd4ab0e..ea0e8ea15e15 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -26,7 +26,7 @@ struct x86_init_mpparse {
 	void (*smp_read_mpc_oem)(struct mpc_table *mpc);
 	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
 	void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name);
-	void (*find_smp_config)(unsigned int reserve);
+	void (*find_smp_config)(void);
 	void (*get_smp_config)(unsigned int early);
 };
 
@@ -91,6 +91,14 @@ struct x86_init_timers {
 };
 
 /**
+ * struct x86_init_iommu - platform specific iommu setup
+ * @iommu_init:			platform specific iommu setup
+ */
+struct x86_init_iommu {
+	int (*iommu_init)(void);
+};
+
+/**
  * struct x86_init_ops - functions for platform specific setup
  *
  */
@@ -101,6 +109,7 @@ struct x86_init_ops {
 	struct x86_init_oem		oem;
 	struct x86_init_paging		paging;
 	struct x86_init_timers		timers;
+	struct x86_init_iommu		iommu;
 };
 
 /**
@@ -116,11 +125,14 @@ struct x86_cpuinit_ops {
  * @calibrate_tsc:		calibrate TSC
  * @get_wallclock:		get time from HW clock like RTC etc.
  * @set_wallclock:		set time back to HW clock
+ * @is_untracked_pat_range	exclude from PAT logic
  */
 struct x86_platform_ops {
 	unsigned long (*calibrate_tsc)(void);
 	unsigned long (*get_wallclock)(void);
 	int (*set_wallclock)(unsigned long nowtime);
+	void (*iommu_shutdown)(void);
+	bool (*is_untracked_pat_range)(u64 start, u64 end);
 };
 
 extern struct x86_init_ops x86_init;
diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h
index d5b7e90c0edf..396ff4cc8ed4 100644
--- a/arch/x86/include/asm/xen/hypervisor.h
+++ b/arch/x86/include/asm/xen/hypervisor.h
@@ -37,31 +37,4 @@
 extern struct shared_info *HYPERVISOR_shared_info;
 extern struct start_info *xen_start_info;
 
-enum xen_domain_type {
-	XEN_NATIVE,		/* running on bare hardware    */
-	XEN_PV_DOMAIN,		/* running in a PV domain      */
-	XEN_HVM_DOMAIN,		/* running in a Xen hvm domain */
-};
-
-#ifdef CONFIG_XEN
-extern enum xen_domain_type xen_domain_type;
-#else
-#define xen_domain_type		XEN_NATIVE
-#endif
-
-#define xen_domain()		(xen_domain_type != XEN_NATIVE)
-#define xen_pv_domain()		(xen_domain() &&			\
-				 xen_domain_type == XEN_PV_DOMAIN)
-#define xen_hvm_domain()	(xen_domain() &&			\
-				 xen_domain_type == XEN_HVM_DOMAIN)
-
-#ifdef CONFIG_XEN_DOM0
-#include <xen/interface/xen.h>
-
-#define xen_initial_domain()	(xen_pv_domain() && \
-				 xen_start_info->flags & SIF_INITDOMAIN)
-#else  /* !CONFIG_XEN_DOM0 */
-#define xen_initial_domain()	(0)
-#endif	/* CONFIG_XEN_DOM0 */
-
 #endif /* _ASM_X86_XEN_HYPERVISOR_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index d8e5d0cdd678..4f2e66e29ecc 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -40,7 +40,7 @@ obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
 obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o
 obj-y			+= bootflag.o e820.o
 obj-y			+= pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
-obj-y			+= alternative.o i8253.o pci-nommu.o
+obj-y			+= alternative.o i8253.o pci-nommu.o hw_breakpoint.o
 obj-y			+= tsc.o io_delay.o rtc.o
 
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 67e929b89875..fb1035cd9a6a 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -624,6 +624,7 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table)
 	}
 
 	hpet_address = hpet_tbl->address.address;
+	hpet_blockid = hpet_tbl->sequence;
 
 	/*
 	 * Some broken BIOSes advertise HPET at 0x0. We really do not
@@ -1122,7 +1123,7 @@ static int __init acpi_parse_madt_ioapic_entries(void)
 	if (!acpi_sci_override_gsi)
 		acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0);
 
-	/* Fill in identity legacy mapings where no override */
+	/* Fill in identity legacy mappings where no override */
 	mp_config_acpi_legacy_irqs();
 
 	count =
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index ca93638ba430..82e508677b91 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -78,12 +78,9 @@ int acpi_save_state_mem(void)
 #ifndef CONFIG_64BIT
 	store_gdt((struct desc_ptr *)&header->pmode_gdt);
 
-	header->pmode_efer_low = nx_enabled;
-	if (header->pmode_efer_low & 1) {
-		/* This is strange, why not save efer, always? */
-		rdmsr(MSR_EFER, header->pmode_efer_low,
-			header->pmode_efer_high);
-	}
+	if (rdmsr_safe(MSR_EFER, &header->pmode_efer_low,
+		       &header->pmode_efer_high))
+		header->pmode_efer_low = header->pmode_efer_high = 0;
 #endif /* !CONFIG_64BIT */
 
 	header->pmode_cr0 = read_cr0();
@@ -119,29 +116,32 @@ void acpi_restore_state_mem(void)
 
 
 /**
- * acpi_reserve_bootmem - do _very_ early ACPI initialisation
+ * acpi_reserve_wakeup_memory - do _very_ early ACPI initialisation
  *
  * We allocate a page from the first 1MB of memory for the wakeup
  * routine for when we come back from a sleep state. The
  * runtime allocator allows specification of <16MB pages, but not
  * <1MB pages.
  */
-void __init acpi_reserve_bootmem(void)
+void __init acpi_reserve_wakeup_memory(void)
 {
+	unsigned long mem;
+
 	if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) {
 		printk(KERN_ERR
 		       "ACPI: Wakeup code way too big, S3 disabled.\n");
 		return;
 	}
 
-	acpi_realmode = (unsigned long)alloc_bootmem_low(WAKEUP_SIZE);
+	mem = find_e820_area(0, 1<<20, WAKEUP_SIZE, PAGE_SIZE);
 
-	if (!acpi_realmode) {
+	if (mem == -1L) {
 		printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n");
 		return;
 	}
-
-	acpi_wakeup_address = virt_to_phys((void *)acpi_realmode);
+	acpi_realmode = (unsigned long) phys_to_virt(mem);
+	acpi_wakeup_address = mem;
+	reserve_early(mem, mem + WAKEUP_SIZE, "ACPI WAKEUP");
 }
 
 
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 0285521e0a99..b990b5cc9541 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2007-2009 Advanced Micro Devices, Inc.
  * Author: Joerg Roedel <joerg.roedel@amd.com>
  *         Leo Duran <leo.duran@amd.com>
  *
@@ -28,6 +28,7 @@
 #include <asm/proto.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
+#include <asm/amd_iommu_proto.h>
 #include <asm/amd_iommu_types.h>
 #include <asm/amd_iommu.h>
 
@@ -56,20 +57,152 @@ struct iommu_cmd {
 	u32 data[4];
 };
 
-static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
-			     struct unity_map_entry *e);
-static struct dma_ops_domain *find_protection_domain(u16 devid);
-static u64 *alloc_pte(struct protection_domain *domain,
-		      unsigned long address, int end_lvl,
-		      u64 **pte_page, gfp_t gfp);
-static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
-				      unsigned long start_page,
-				      unsigned int pages);
 static void reset_iommu_command_buffer(struct amd_iommu *iommu);
-static u64 *fetch_pte(struct protection_domain *domain,
-		      unsigned long address, int map_size);
 static void update_domain(struct protection_domain *domain);
 
+/****************************************************************************
+ *
+ * Helper functions
+ *
+ ****************************************************************************/
+
+static inline u16 get_device_id(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	return calc_devid(pdev->bus->number, pdev->devfn);
+}
+
+static struct iommu_dev_data *get_dev_data(struct device *dev)
+{
+	return dev->archdata.iommu;
+}
+
+/*
+ * In this function the list of preallocated protection domains is traversed to
+ * find the domain for a specific device
+ */
+static struct dma_ops_domain *find_protection_domain(u16 devid)
+{
+	struct dma_ops_domain *entry, *ret = NULL;
+	unsigned long flags;
+	u16 alias = amd_iommu_alias_table[devid];
+
+	if (list_empty(&iommu_pd_list))
+		return NULL;
+
+	spin_lock_irqsave(&iommu_pd_list_lock, flags);
+
+	list_for_each_entry(entry, &iommu_pd_list, list) {
+		if (entry->target_dev == devid ||
+		    entry->target_dev == alias) {
+			ret = entry;
+			break;
+		}
+	}
+
+	spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
+
+	return ret;
+}
+
+/*
+ * This function checks if the driver got a valid device from the caller to
+ * avoid dereferencing invalid pointers.
+ */
+static bool check_device(struct device *dev)
+{
+	u16 devid;
+
+	if (!dev || !dev->dma_mask)
+		return false;
+
+	/* No device or no PCI device */
+	if (!dev || dev->bus != &pci_bus_type)
+		return false;
+
+	devid = get_device_id(dev);
+
+	/* Out of our scope? */
+	if (devid > amd_iommu_last_bdf)
+		return false;
+
+	if (amd_iommu_rlookup_table[devid] == NULL)
+		return false;
+
+	return true;
+}
+
+static int iommu_init_device(struct device *dev)
+{
+	struct iommu_dev_data *dev_data;
+	struct pci_dev *pdev;
+	u16 devid, alias;
+
+	if (dev->archdata.iommu)
+		return 0;
+
+	dev_data = kzalloc(sizeof(*dev_data), GFP_KERNEL);
+	if (!dev_data)
+		return -ENOMEM;
+
+	dev_data->dev = dev;
+
+	devid = get_device_id(dev);
+	alias = amd_iommu_alias_table[devid];
+	pdev = pci_get_bus_and_slot(PCI_BUS(alias), alias & 0xff);
+	if (pdev)
+		dev_data->alias = &pdev->dev;
+
+	atomic_set(&dev_data->bind, 0);
+
+	dev->archdata.iommu = dev_data;
+
+
+	return 0;
+}
+
+static void iommu_uninit_device(struct device *dev)
+{
+	kfree(dev->archdata.iommu);
+}
+
+void __init amd_iommu_uninit_devices(void)
+{
+	struct pci_dev *pdev = NULL;
+
+	for_each_pci_dev(pdev) {
+
+		if (!check_device(&pdev->dev))
+			continue;
+
+		iommu_uninit_device(&pdev->dev);
+	}
+}
+
+int __init amd_iommu_init_devices(void)
+{
+	struct pci_dev *pdev = NULL;
+	int ret = 0;
+
+	for_each_pci_dev(pdev) {
+
+		if (!check_device(&pdev->dev))
+			continue;
+
+		ret = iommu_init_device(&pdev->dev);
+		if (ret)
+			goto out_free;
+	}
+
+	return 0;
+
+out_free:
+
+	amd_iommu_uninit_devices();
+
+	return ret;
+}
 #ifdef CONFIG_AMD_IOMMU_STATS
 
 /*
@@ -90,7 +223,6 @@ DECLARE_STATS_COUNTER(alloced_io_mem);
 DECLARE_STATS_COUNTER(total_map_requests);
 
 static struct dentry *stats_dir;
-static struct dentry *de_isolate;
 static struct dentry *de_fflush;
 
 static void amd_iommu_stats_add(struct __iommu_counter *cnt)
@@ -108,9 +240,6 @@ static void amd_iommu_stats_init(void)
 	if (stats_dir == NULL)
 		return;
 
-	de_isolate = debugfs_create_bool("isolation", 0444, stats_dir,
-					 (u32 *)&amd_iommu_isolate);
-
 	de_fflush  = debugfs_create_bool("fullflush", 0444, stats_dir,
 					 (u32 *)&amd_iommu_unmap_flush);
 
@@ -130,12 +259,6 @@ static void amd_iommu_stats_init(void)
 
 #endif
 
-/* returns !0 if the IOMMU is caching non-present entries in its TLB */
-static int iommu_has_npcache(struct amd_iommu *iommu)
-{
-	return iommu->cap & (1UL << IOMMU_CAP_NPCACHE);
-}
-
 /****************************************************************************
  *
  * Interrupt handling functions
@@ -199,6 +322,7 @@ static void iommu_print_event(struct amd_iommu *iommu, void *__evt)
 		break;
 	case EVENT_TYPE_ILL_CMD:
 		printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address);
+		iommu->reset_in_progress = true;
 		reset_iommu_command_buffer(iommu);
 		dump_command(address);
 		break;
@@ -321,11 +445,8 @@ static void __iommu_wait_for_completion(struct amd_iommu *iommu)
 	status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
 	writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
 
-	if (unlikely(i == EXIT_LOOP_COUNT)) {
-		spin_unlock(&iommu->lock);
-		reset_iommu_command_buffer(iommu);
-		spin_lock(&iommu->lock);
-	}
+	if (unlikely(i == EXIT_LOOP_COUNT))
+		iommu->reset_in_progress = true;
 }
 
 /*
@@ -372,26 +493,46 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
 out:
 	spin_unlock_irqrestore(&iommu->lock, flags);
 
+	if (iommu->reset_in_progress)
+		reset_iommu_command_buffer(iommu);
+
 	return 0;
 }
 
+static void iommu_flush_complete(struct protection_domain *domain)
+{
+	int i;
+
+	for (i = 0; i < amd_iommus_present; ++i) {
+		if (!domain->dev_iommu[i])
+			continue;
+
+		/*
+		 * Devices of this domain are behind this IOMMU
+		 * We need to wait for completion of all commands.
+		 */
+		iommu_completion_wait(amd_iommus[i]);
+	}
+}
+
 /*
  * Command send function for invalidating a device table entry
  */
-static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
+static int iommu_flush_device(struct device *dev)
 {
+	struct amd_iommu *iommu;
 	struct iommu_cmd cmd;
-	int ret;
+	u16 devid;
 
-	BUG_ON(iommu == NULL);
+	devid = get_device_id(dev);
+	iommu = amd_iommu_rlookup_table[devid];
 
+	/* Build command */
 	memset(&cmd, 0, sizeof(cmd));
 	CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY);
 	cmd.data[0] = devid;
 
-	ret = iommu_queue_command(iommu, &cmd);
-
-	return ret;
+	return iommu_queue_command(iommu, &cmd);
 }
 
 static void __iommu_build_inv_iommu_pages(struct iommu_cmd *cmd, u64 address,
@@ -430,11 +571,11 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
  * It invalidates a single PTE if the range to flush is within a single
  * page. Otherwise it flushes the whole TLB of the IOMMU.
  */
-static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
-		u64 address, size_t size)
+static void __iommu_flush_pages(struct protection_domain *domain,
+				u64 address, size_t size, int pde)
 {
-	int s = 0;
-	unsigned pages = iommu_num_pages(address, size, PAGE_SIZE);
+	int s = 0, i;
+	unsigned long pages = iommu_num_pages(address, size, PAGE_SIZE);
 
 	address &= PAGE_MASK;
 
@@ -447,142 +588,212 @@ static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
 		s = 1;
 	}
 
-	iommu_queue_inv_iommu_pages(iommu, address, domid, 0, s);
 
-	return 0;
+	for (i = 0; i < amd_iommus_present; ++i) {
+		if (!domain->dev_iommu[i])
+			continue;
+
+		/*
+		 * Devices of this domain are behind this IOMMU
+		 * We need a TLB flush
+		 */
+		iommu_queue_inv_iommu_pages(amd_iommus[i], address,
+					    domain->id, pde, s);
+	}
+
+	return;
 }
 
-/* Flush the whole IO/TLB for a given protection domain */
-static void iommu_flush_tlb(struct amd_iommu *iommu, u16 domid)
+static void iommu_flush_pages(struct protection_domain *domain,
+			     u64 address, size_t size)
 {
-	u64 address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
-
-	INC_STATS_COUNTER(domain_flush_single);
+	__iommu_flush_pages(domain, address, size, 0);
+}
 
-	iommu_queue_inv_iommu_pages(iommu, address, domid, 0, 1);
+/* Flush the whole IO/TLB for a given protection domain */
+static void iommu_flush_tlb(struct protection_domain *domain)
+{
+	__iommu_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 0);
 }
 
 /* Flush the whole IO/TLB for a given protection domain - including PDE */
-static void iommu_flush_tlb_pde(struct amd_iommu *iommu, u16 domid)
+static void iommu_flush_tlb_pde(struct protection_domain *domain)
 {
-       u64 address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
-
-       INC_STATS_COUNTER(domain_flush_single);
-
-       iommu_queue_inv_iommu_pages(iommu, address, domid, 1, 1);
+	__iommu_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 1);
 }
 
+
 /*
- * This function flushes one domain on one IOMMU
+ * This function flushes the DTEs for all devices in domain
  */
-static void flush_domain_on_iommu(struct amd_iommu *iommu, u16 domid)
+static void iommu_flush_domain_devices(struct protection_domain *domain)
 {
-	struct iommu_cmd cmd;
+	struct iommu_dev_data *dev_data;
 	unsigned long flags;
 
-	__iommu_build_inv_iommu_pages(&cmd, CMD_INV_IOMMU_ALL_PAGES_ADDRESS,
-				      domid, 1, 1);
+	spin_lock_irqsave(&domain->lock, flags);
 
-	spin_lock_irqsave(&iommu->lock, flags);
-	__iommu_queue_command(iommu, &cmd);
-	__iommu_completion_wait(iommu);
-	__iommu_wait_for_completion(iommu);
-	spin_unlock_irqrestore(&iommu->lock, flags);
+	list_for_each_entry(dev_data, &domain->dev_list, list)
+		iommu_flush_device(dev_data->dev);
+
+	spin_unlock_irqrestore(&domain->lock, flags);
 }
 
-static void flush_all_domains_on_iommu(struct amd_iommu *iommu)
+static void iommu_flush_all_domain_devices(void)
 {
-	int i;
+	struct protection_domain *domain;
+	unsigned long flags;
 
-	for (i = 1; i < MAX_DOMAIN_ID; ++i) {
-		if (!test_bit(i, amd_iommu_pd_alloc_bitmap))
-			continue;
-		flush_domain_on_iommu(iommu, i);
+	spin_lock_irqsave(&amd_iommu_pd_lock, flags);
+
+	list_for_each_entry(domain, &amd_iommu_pd_list, list) {
+		iommu_flush_domain_devices(domain);
+		iommu_flush_complete(domain);
 	}
 
+	spin_unlock_irqrestore(&amd_iommu_pd_lock, flags);
+}
+
+void amd_iommu_flush_all_devices(void)
+{
+	iommu_flush_all_domain_devices();
 }
 
 /*
- * This function is used to flush the IO/TLB for a given protection domain
- * on every IOMMU in the system
+ * This function uses heavy locking and may disable irqs for some time. But
+ * this is no issue because it is only called during resume.
  */
-static void iommu_flush_domain(u16 domid)
+void amd_iommu_flush_all_domains(void)
 {
-	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	unsigned long flags;
 
-	INC_STATS_COUNTER(domain_flush_all);
+	spin_lock_irqsave(&amd_iommu_pd_lock, flags);
 
-	for_each_iommu(iommu)
-		flush_domain_on_iommu(iommu, domid);
+	list_for_each_entry(domain, &amd_iommu_pd_list, list) {
+		spin_lock(&domain->lock);
+		iommu_flush_tlb_pde(domain);
+		iommu_flush_complete(domain);
+		spin_unlock(&domain->lock);
+	}
+
+	spin_unlock_irqrestore(&amd_iommu_pd_lock, flags);
 }
 
-void amd_iommu_flush_all_domains(void)
+static void reset_iommu_command_buffer(struct amd_iommu *iommu)
 {
-	struct amd_iommu *iommu;
+	pr_err("AMD-Vi: Resetting IOMMU command buffer\n");
 
-	for_each_iommu(iommu)
-		flush_all_domains_on_iommu(iommu);
+	if (iommu->reset_in_progress)
+		panic("AMD-Vi: ILLEGAL_COMMAND_ERROR while resetting command buffer\n");
+
+	amd_iommu_reset_cmd_buffer(iommu);
+	amd_iommu_flush_all_devices();
+	amd_iommu_flush_all_domains();
+
+	iommu->reset_in_progress = false;
 }
 
-static void flush_all_devices_for_iommu(struct amd_iommu *iommu)
+/****************************************************************************
+ *
+ * The functions below are used the create the page table mappings for
+ * unity mapped regions.
+ *
+ ****************************************************************************/
+
+/*
+ * This function is used to add another level to an IO page table. Adding
+ * another level increases the size of the address space by 9 bits to a size up
+ * to 64 bits.
+ */
+static bool increase_address_space(struct protection_domain *domain,
+				   gfp_t gfp)
 {
-	int i;
+	u64 *pte;
 
-	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
-		if (iommu != amd_iommu_rlookup_table[i])
-			continue;
+	if (domain->mode == PAGE_MODE_6_LEVEL)
+		/* address space already 64 bit large */
+		return false;
 
-		iommu_queue_inv_dev_entry(iommu, i);
-		iommu_completion_wait(iommu);
-	}
+	pte = (void *)get_zeroed_page(gfp);
+	if (!pte)
+		return false;
+
+	*pte             = PM_LEVEL_PDE(domain->mode,
+					virt_to_phys(domain->pt_root));
+	domain->pt_root  = pte;
+	domain->mode    += 1;
+	domain->updated  = true;
+
+	return true;
 }
 
-static void flush_devices_by_domain(struct protection_domain *domain)
+static u64 *alloc_pte(struct protection_domain *domain,
+		      unsigned long address,
+		      int end_lvl,
+		      u64 **pte_page,
+		      gfp_t gfp)
 {
-	struct amd_iommu *iommu;
-	int i;
+	u64 *pte, *page;
+	int level;
 
-	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
-		if ((domain == NULL && amd_iommu_pd_table[i] == NULL) ||
-		    (amd_iommu_pd_table[i] != domain))
-			continue;
+	while (address > PM_LEVEL_SIZE(domain->mode))
+		increase_address_space(domain, gfp);
 
-		iommu = amd_iommu_rlookup_table[i];
-		if (!iommu)
-			continue;
+	level =  domain->mode - 1;
+	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
 
-		iommu_queue_inv_dev_entry(iommu, i);
-		iommu_completion_wait(iommu);
+	while (level > end_lvl) {
+		if (!IOMMU_PTE_PRESENT(*pte)) {
+			page = (u64 *)get_zeroed_page(gfp);
+			if (!page)
+				return NULL;
+			*pte = PM_LEVEL_PDE(level, virt_to_phys(page));
+		}
+
+		level -= 1;
+
+		pte = IOMMU_PTE_PAGE(*pte);
+
+		if (pte_page && level == end_lvl)
+			*pte_page = pte;
+
+		pte = &pte[PM_LEVEL_INDEX(level, address)];
 	}
+
+	return pte;
 }
 
-static void reset_iommu_command_buffer(struct amd_iommu *iommu)
+/*
+ * This function checks if there is a PTE for a given dma address. If
+ * there is one, it returns the pointer to it.
+ */
+static u64 *fetch_pte(struct protection_domain *domain,
+		      unsigned long address, int map_size)
 {
-	pr_err("AMD-Vi: Resetting IOMMU command buffer\n");
+	int level;
+	u64 *pte;
 
-	if (iommu->reset_in_progress)
-		panic("AMD-Vi: ILLEGAL_COMMAND_ERROR while resetting command buffer\n");
+	level =  domain->mode - 1;
+	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
 
-	iommu->reset_in_progress = true;
+	while (level > map_size) {
+		if (!IOMMU_PTE_PRESENT(*pte))
+			return NULL;
 
-	amd_iommu_reset_cmd_buffer(iommu);
-	flush_all_devices_for_iommu(iommu);
-	flush_all_domains_on_iommu(iommu);
+		level -= 1;
 
-	iommu->reset_in_progress = false;
-}
+		pte = IOMMU_PTE_PAGE(*pte);
+		pte = &pte[PM_LEVEL_INDEX(level, address)];
 
-void amd_iommu_flush_all_devices(void)
-{
-	flush_devices_by_domain(NULL);
-}
+		if ((PM_PTE_LEVEL(*pte) == 0) && level != map_size) {
+			pte = NULL;
+			break;
+		}
+	}
 
-/****************************************************************************
- *
- * The functions below are used the create the page table mappings for
- * unity mapped regions.
- *
- ****************************************************************************/
+	return pte;
+}
 
 /*
  * Generic mapping functions. It maps a physical address into a DMA
@@ -654,28 +865,6 @@ static int iommu_for_unity_map(struct amd_iommu *iommu,
 }
 
 /*
- * Init the unity mappings for a specific IOMMU in the system
- *
- * Basically iterates over all unity mapping entries and applies them to
- * the default domain DMA of that IOMMU if necessary.
- */
-static int iommu_init_unity_mappings(struct amd_iommu *iommu)
-{
-	struct unity_map_entry *entry;
-	int ret;
-
-	list_for_each_entry(entry, &amd_iommu_unity_map, list) {
-		if (!iommu_for_unity_map(iommu, entry))
-			continue;
-		ret = dma_ops_unity_map(iommu->default_dom, entry);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
-/*
  * This function actually applies the mapping to the page table of the
  * dma_ops domain.
  */
@@ -704,6 +893,28 @@ static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 }
 
 /*
+ * Init the unity mappings for a specific IOMMU in the system
+ *
+ * Basically iterates over all unity mapping entries and applies them to
+ * the default domain DMA of that IOMMU if necessary.
+ */
+static int iommu_init_unity_mappings(struct amd_iommu *iommu)
+{
+	struct unity_map_entry *entry;
+	int ret;
+
+	list_for_each_entry(entry, &amd_iommu_unity_map, list) {
+		if (!iommu_for_unity_map(iommu, entry))
+			continue;
+		ret = dma_ops_unity_map(iommu->default_dom, entry);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/*
  * Inits the unity mappings required for a specific device
  */
 static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
@@ -740,34 +951,23 @@ static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
  */
 
 /*
- * This function checks if there is a PTE for a given dma address. If
- * there is one, it returns the pointer to it.
+ * Used to reserve address ranges in the aperture (e.g. for exclusion
+ * ranges.
  */
-static u64 *fetch_pte(struct protection_domain *domain,
-		      unsigned long address, int map_size)
+static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
+				      unsigned long start_page,
+				      unsigned int pages)
 {
-	int level;
-	u64 *pte;
-
-	level =  domain->mode - 1;
-	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
-
-	while (level > map_size) {
-		if (!IOMMU_PTE_PRESENT(*pte))
-			return NULL;
-
-		level -= 1;
+	unsigned int i, last_page = dom->aperture_size >> PAGE_SHIFT;
 
-		pte = IOMMU_PTE_PAGE(*pte);
-		pte = &pte[PM_LEVEL_INDEX(level, address)];
+	if (start_page + pages > last_page)
+		pages = last_page - start_page;
 
-		if ((PM_PTE_LEVEL(*pte) == 0) && level != map_size) {
-			pte = NULL;
-			break;
-		}
+	for (i = start_page; i < start_page + pages; ++i) {
+		int index = i / APERTURE_RANGE_PAGES;
+		int page  = i % APERTURE_RANGE_PAGES;
+		__set_bit(page, dom->aperture[index]->bitmap);
 	}
-
-	return pte;
 }
 
 /*
@@ -775,11 +975,11 @@ static u64 *fetch_pte(struct protection_domain *domain,
  * aperture in case of dma_ops domain allocation or address allocation
  * failure.
  */
-static int alloc_new_range(struct amd_iommu *iommu,
-			   struct dma_ops_domain *dma_dom,
+static int alloc_new_range(struct dma_ops_domain *dma_dom,
 			   bool populate, gfp_t gfp)
 {
 	int index = dma_dom->aperture_size >> APERTURE_RANGE_SHIFT;
+	struct amd_iommu *iommu;
 	int i;
 
 #ifdef CONFIG_IOMMU_STRESS
@@ -819,14 +1019,17 @@ static int alloc_new_range(struct amd_iommu *iommu,
 	dma_dom->aperture_size += APERTURE_RANGE_SIZE;
 
 	/* Intialize the exclusion range if necessary */
-	if (iommu->exclusion_start &&
-	    iommu->exclusion_start >= dma_dom->aperture[index]->offset &&
-	    iommu->exclusion_start < dma_dom->aperture_size) {
-		unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT;
-		int pages = iommu_num_pages(iommu->exclusion_start,
-					    iommu->exclusion_length,
-					    PAGE_SIZE);
-		dma_ops_reserve_addresses(dma_dom, startpage, pages);
+	for_each_iommu(iommu) {
+		if (iommu->exclusion_start &&
+		    iommu->exclusion_start >= dma_dom->aperture[index]->offset
+		    && iommu->exclusion_start < dma_dom->aperture_size) {
+			unsigned long startpage;
+			int pages = iommu_num_pages(iommu->exclusion_start,
+						    iommu->exclusion_length,
+						    PAGE_SIZE);
+			startpage = iommu->exclusion_start >> PAGE_SHIFT;
+			dma_ops_reserve_addresses(dma_dom, startpage, pages);
+		}
 	}
 
 	/*
@@ -928,7 +1131,7 @@ static unsigned long dma_ops_alloc_addresses(struct device *dev,
 	}
 
 	if (unlikely(address == -1))
-		address = bad_dma_address;
+		address = DMA_ERROR_CODE;
 
 	WARN_ON((address + (PAGE_SIZE*pages)) > dom->aperture_size);
 
@@ -973,6 +1176,31 @@ static void dma_ops_free_addresses(struct dma_ops_domain *dom,
  *
  ****************************************************************************/
 
+/*
+ * This function adds a protection domain to the global protection domain list
+ */
+static void add_domain_to_list(struct protection_domain *domain)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&amd_iommu_pd_lock, flags);
+	list_add(&domain->list, &amd_iommu_pd_list);
+	spin_unlock_irqrestore(&amd_iommu_pd_lock, flags);
+}
+
+/*
+ * This function removes a protection domain to the global
+ * protection domain list
+ */
+static void del_domain_from_list(struct protection_domain *domain)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&amd_iommu_pd_lock, flags);
+	list_del(&domain->list);
+	spin_unlock_irqrestore(&amd_iommu_pd_lock, flags);
+}
+
 static u16 domain_id_alloc(void)
 {
 	unsigned long flags;
@@ -1000,26 +1228,6 @@ static void domain_id_free(int id)
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 }
 
-/*
- * Used to reserve address ranges in the aperture (e.g. for exclusion
- * ranges.
- */
-static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
-				      unsigned long start_page,
-				      unsigned int pages)
-{
-	unsigned int i, last_page = dom->aperture_size >> PAGE_SHIFT;
-
-	if (start_page + pages > last_page)
-		pages = last_page - start_page;
-
-	for (i = start_page; i < start_page + pages; ++i) {
-		int index = i / APERTURE_RANGE_PAGES;
-		int page  = i % APERTURE_RANGE_PAGES;
-		__set_bit(page, dom->aperture[index]->bitmap);
-	}
-}
-
 static void free_pagetable(struct protection_domain *domain)
 {
 	int i, j;
@@ -1061,6 +1269,8 @@ static void dma_ops_domain_free(struct dma_ops_domain *dom)
 	if (!dom)
 		return;
 
+	del_domain_from_list(&dom->domain);
+
 	free_pagetable(&dom->domain);
 
 	for (i = 0; i < APERTURE_MAX_RANGES; ++i) {
@@ -1078,7 +1288,7 @@ static void dma_ops_domain_free(struct dma_ops_domain *dom)
  * It also intializes the page table and the address allocator data
  * structures required for the dma_ops interface
  */
-static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu)
+static struct dma_ops_domain *dma_ops_domain_alloc(void)
 {
 	struct dma_ops_domain *dma_dom;
 
@@ -1091,6 +1301,7 @@ static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu)
 	dma_dom->domain.id = domain_id_alloc();
 	if (dma_dom->domain.id == 0)
 		goto free_dma_dom;
+	INIT_LIST_HEAD(&dma_dom->domain.dev_list);
 	dma_dom->domain.mode = PAGE_MODE_2_LEVEL;
 	dma_dom->domain.pt_root = (void *)get_zeroed_page(GFP_KERNEL);
 	dma_dom->domain.flags = PD_DMA_OPS_MASK;
@@ -1101,7 +1312,9 @@ static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu)
 	dma_dom->need_flush = false;
 	dma_dom->target_dev = 0xffff;
 
-	if (alloc_new_range(iommu, dma_dom, true, GFP_KERNEL))
+	add_domain_to_list(&dma_dom->domain);
+
+	if (alloc_new_range(dma_dom, true, GFP_KERNEL))
 		goto free_dma_dom;
 
 	/*
@@ -1129,22 +1342,6 @@ static bool dma_ops_domain(struct protection_domain *domain)
 	return domain->flags & PD_DMA_OPS_MASK;
 }
 
-/*
- * Find out the protection domain structure for a given PCI device. This
- * will give us the pointer to the page table root for example.
- */
-static struct protection_domain *domain_for_device(u16 devid)
-{
-	struct protection_domain *dom;
-	unsigned long flags;
-
-	read_lock_irqsave(&amd_iommu_devtable_lock, flags);
-	dom = amd_iommu_pd_table[devid];
-	read_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
-
-	return dom;
-}
-
 static void set_dte_entry(u16 devid, struct protection_domain *domain)
 {
 	u64 pte_root = virt_to_phys(domain->pt_root);
@@ -1156,42 +1353,123 @@ static void set_dte_entry(u16 devid, struct protection_domain *domain)
 	amd_iommu_dev_table[devid].data[2] = domain->id;
 	amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
 	amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
+}
 
-	amd_iommu_pd_table[devid] = domain;
+static void clear_dte_entry(u16 devid)
+{
+	/* remove entry from the device table seen by the hardware */
+	amd_iommu_dev_table[devid].data[0] = IOMMU_PTE_P | IOMMU_PTE_TV;
+	amd_iommu_dev_table[devid].data[1] = 0;
+	amd_iommu_dev_table[devid].data[2] = 0;
+
+	amd_iommu_apply_erratum_63(devid);
+}
+
+static void do_attach(struct device *dev, struct protection_domain *domain)
+{
+	struct iommu_dev_data *dev_data;
+	struct amd_iommu *iommu;
+	u16 devid;
+
+	devid    = get_device_id(dev);
+	iommu    = amd_iommu_rlookup_table[devid];
+	dev_data = get_dev_data(dev);
+
+	/* Update data structures */
+	dev_data->domain = domain;
+	list_add(&dev_data->list, &domain->dev_list);
+	set_dte_entry(devid, domain);
+
+	/* Do reference counting */
+	domain->dev_iommu[iommu->index] += 1;
+	domain->dev_cnt                 += 1;
+
+	/* Flush the DTE entry */
+	iommu_flush_device(dev);
+}
+
+static void do_detach(struct device *dev)
+{
+	struct iommu_dev_data *dev_data;
+	struct amd_iommu *iommu;
+	u16 devid;
+
+	devid    = get_device_id(dev);
+	iommu    = amd_iommu_rlookup_table[devid];
+	dev_data = get_dev_data(dev);
+
+	/* decrease reference counters */
+	dev_data->domain->dev_iommu[iommu->index] -= 1;
+	dev_data->domain->dev_cnt                 -= 1;
+
+	/* Update data structures */
+	dev_data->domain = NULL;
+	list_del(&dev_data->list);
+	clear_dte_entry(devid);
+
+	/* Flush the DTE entry */
+	iommu_flush_device(dev);
 }
 
 /*
  * If a device is not yet associated with a domain, this function does
  * assigns it visible for the hardware
  */
-static void __attach_device(struct amd_iommu *iommu,
-			    struct protection_domain *domain,
-			    u16 devid)
+static int __attach_device(struct device *dev,
+			   struct protection_domain *domain)
 {
+	struct iommu_dev_data *dev_data, *alias_data;
+
+	dev_data   = get_dev_data(dev);
+	alias_data = get_dev_data(dev_data->alias);
+
+	if (!alias_data)
+		return -EINVAL;
+
 	/* lock domain */
 	spin_lock(&domain->lock);
 
-	/* update DTE entry */
-	set_dte_entry(devid, domain);
+	/* Some sanity checks */
+	if (alias_data->domain != NULL &&
+	    alias_data->domain != domain)
+		return -EBUSY;
+
+	if (dev_data->domain != NULL &&
+	    dev_data->domain != domain)
+		return -EBUSY;
+
+	/* Do real assignment */
+	if (dev_data->alias != dev) {
+		alias_data = get_dev_data(dev_data->alias);
+		if (alias_data->domain == NULL)
+			do_attach(dev_data->alias, domain);
 
-	domain->dev_cnt += 1;
+		atomic_inc(&alias_data->bind);
+	}
+
+	if (dev_data->domain == NULL)
+		do_attach(dev, domain);
+
+	atomic_inc(&dev_data->bind);
 
 	/* ready */
 	spin_unlock(&domain->lock);
+
+	return 0;
 }
 
 /*
  * If a device is not yet associated with a domain, this function does
  * assigns it visible for the hardware
  */
-static void attach_device(struct amd_iommu *iommu,
-			  struct protection_domain *domain,
-			  u16 devid)
+static int attach_device(struct device *dev,
+			 struct protection_domain *domain)
 {
 	unsigned long flags;
+	int ret;
 
 	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
-	__attach_device(iommu, domain, devid);
+	ret = __attach_device(dev, domain);
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 
 	/*
@@ -1199,98 +1477,125 @@ static void attach_device(struct amd_iommu *iommu,
 	 * left the caches in the IOMMU dirty. So we have to flush
 	 * here to evict all dirty stuff.
 	 */
-	iommu_queue_inv_dev_entry(iommu, devid);
-	iommu_flush_tlb_pde(iommu, domain->id);
+	iommu_flush_tlb_pde(domain);
+
+	return ret;
 }
 
 /*
  * Removes a device from a protection domain (unlocked)
  */
-static void __detach_device(struct protection_domain *domain, u16 devid)
+static void __detach_device(struct device *dev)
 {
+	struct iommu_dev_data *dev_data = get_dev_data(dev);
+	struct iommu_dev_data *alias_data;
+	unsigned long flags;
 
-	/* lock domain */
-	spin_lock(&domain->lock);
+	BUG_ON(!dev_data->domain);
 
-	/* remove domain from the lookup table */
-	amd_iommu_pd_table[devid] = NULL;
+	spin_lock_irqsave(&dev_data->domain->lock, flags);
 
-	/* remove entry from the device table seen by the hardware */
-	amd_iommu_dev_table[devid].data[0] = IOMMU_PTE_P | IOMMU_PTE_TV;
-	amd_iommu_dev_table[devid].data[1] = 0;
-	amd_iommu_dev_table[devid].data[2] = 0;
-
-	amd_iommu_apply_erratum_63(devid);
+	if (dev_data->alias != dev) {
+		alias_data = get_dev_data(dev_data->alias);
+		if (atomic_dec_and_test(&alias_data->bind))
+			do_detach(dev_data->alias);
+	}
 
-	/* decrease reference counter */
-	domain->dev_cnt -= 1;
+	if (atomic_dec_and_test(&dev_data->bind))
+		do_detach(dev);
 
-	/* ready */
-	spin_unlock(&domain->lock);
+	spin_unlock_irqrestore(&dev_data->domain->lock, flags);
 
 	/*
 	 * If we run in passthrough mode the device must be assigned to the
 	 * passthrough domain if it is detached from any other domain
 	 */
-	if (iommu_pass_through) {
-		struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
-		__attach_device(iommu, pt_domain, devid);
-	}
+	if (iommu_pass_through && dev_data->domain == NULL)
+		__attach_device(dev, pt_domain);
 }
 
 /*
  * Removes a device from a protection domain (with devtable_lock held)
  */
-static void detach_device(struct protection_domain *domain, u16 devid)
+static void detach_device(struct device *dev)
 {
 	unsigned long flags;
 
 	/* lock device table */
 	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
-	__detach_device(domain, devid);
+	__detach_device(dev);
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 }
 
+/*
+ * Find out the protection domain structure for a given PCI device. This
+ * will give us the pointer to the page table root for example.
+ */
+static struct protection_domain *domain_for_device(struct device *dev)
+{
+	struct protection_domain *dom;
+	struct iommu_dev_data *dev_data, *alias_data;
+	unsigned long flags;
+	u16 devid, alias;
+
+	devid      = get_device_id(dev);
+	alias      = amd_iommu_alias_table[devid];
+	dev_data   = get_dev_data(dev);
+	alias_data = get_dev_data(dev_data->alias);
+	if (!alias_data)
+		return NULL;
+
+	read_lock_irqsave(&amd_iommu_devtable_lock, flags);
+	dom = dev_data->domain;
+	if (dom == NULL &&
+	    alias_data->domain != NULL) {
+		__attach_device(dev, alias_data->domain);
+		dom = alias_data->domain;
+	}
+
+	read_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+
+	return dom;
+}
+
 static int device_change_notifier(struct notifier_block *nb,
 				  unsigned long action, void *data)
 {
 	struct device *dev = data;
-	struct pci_dev *pdev = to_pci_dev(dev);
-	u16 devid = calc_devid(pdev->bus->number, pdev->devfn);
+	u16 devid;
 	struct protection_domain *domain;
 	struct dma_ops_domain *dma_domain;
 	struct amd_iommu *iommu;
 	unsigned long flags;
 
-	if (devid > amd_iommu_last_bdf)
-		goto out;
-
-	devid = amd_iommu_alias_table[devid];
-
-	iommu = amd_iommu_rlookup_table[devid];
-	if (iommu == NULL)
-		goto out;
-
-	domain = domain_for_device(devid);
+	if (!check_device(dev))
+		return 0;
 
-	if (domain && !dma_ops_domain(domain))
-		WARN_ONCE(1, "AMD IOMMU WARNING: device %s already bound "
-			  "to a non-dma-ops domain\n", dev_name(dev));
+	devid  = get_device_id(dev);
+	iommu  = amd_iommu_rlookup_table[devid];
 
 	switch (action) {
 	case BUS_NOTIFY_UNBOUND_DRIVER:
+
+		domain = domain_for_device(dev);
+
 		if (!domain)
 			goto out;
 		if (iommu_pass_through)
 			break;
-		detach_device(domain, devid);
+		detach_device(dev);
 		break;
 	case BUS_NOTIFY_ADD_DEVICE:
+
+		iommu_init_device(dev);
+
+		domain = domain_for_device(dev);
+
 		/* allocate a protection domain if a device is added */
 		dma_domain = find_protection_domain(devid);
 		if (dma_domain)
 			goto out;
-		dma_domain = dma_ops_domain_alloc(iommu);
+		dma_domain = dma_ops_domain_alloc();
 		if (!dma_domain)
 			goto out;
 		dma_domain->target_dev = devid;
@@ -1300,11 +1605,15 @@ static int device_change_notifier(struct notifier_block *nb,
 		spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
 
 		break;
+	case BUS_NOTIFY_DEL_DEVICE:
+
+		iommu_uninit_device(dev);
+
 	default:
 		goto out;
 	}
 
-	iommu_queue_inv_dev_entry(iommu, devid);
+	iommu_flush_device(dev);
 	iommu_completion_wait(iommu);
 
 out:
@@ -1315,6 +1624,11 @@ static struct notifier_block device_nb = {
 	.notifier_call = device_change_notifier,
 };
 
+void amd_iommu_init_notifier(void)
+{
+	bus_register_notifier(&pci_bus_type, &device_nb);
+}
+
 /*****************************************************************************
  *
  * The next functions belong to the dma_ops mapping/unmapping code.
@@ -1322,106 +1636,46 @@ static struct notifier_block device_nb = {
  *****************************************************************************/
 
 /*
- * This function checks if the driver got a valid device from the caller to
- * avoid dereferencing invalid pointers.
- */
-static bool check_device(struct device *dev)
-{
-	if (!dev || !dev->dma_mask)
-		return false;
-
-	return true;
-}
-
-/*
- * In this function the list of preallocated protection domains is traversed to
- * find the domain for a specific device
- */
-static struct dma_ops_domain *find_protection_domain(u16 devid)
-{
-	struct dma_ops_domain *entry, *ret = NULL;
-	unsigned long flags;
-
-	if (list_empty(&iommu_pd_list))
-		return NULL;
-
-	spin_lock_irqsave(&iommu_pd_list_lock, flags);
-
-	list_for_each_entry(entry, &iommu_pd_list, list) {
-		if (entry->target_dev == devid) {
-			ret = entry;
-			break;
-		}
-	}
-
-	spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
-
-	return ret;
-}
-
-/*
  * In the dma_ops path we only have the struct device. This function
  * finds the corresponding IOMMU, the protection domain and the
  * requestor id for a given device.
  * If the device is not yet associated with a domain this is also done
  * in this function.
  */
-static int get_device_resources(struct device *dev,
-				struct amd_iommu **iommu,
-				struct protection_domain **domain,
-				u16 *bdf)
+static struct protection_domain *get_domain(struct device *dev)
 {
+	struct protection_domain *domain;
 	struct dma_ops_domain *dma_dom;
-	struct pci_dev *pcidev;
-	u16 _bdf;
-
-	*iommu = NULL;
-	*domain = NULL;
-	*bdf = 0xffff;
-
-	if (dev->bus != &pci_bus_type)
-		return 0;
+	u16 devid = get_device_id(dev);
 
-	pcidev = to_pci_dev(dev);
-	_bdf = calc_devid(pcidev->bus->number, pcidev->devfn);
+	if (!check_device(dev))
+		return ERR_PTR(-EINVAL);
 
-	/* device not translated by any IOMMU in the system? */
-	if (_bdf > amd_iommu_last_bdf)
-		return 0;
+	domain = domain_for_device(dev);
+	if (domain != NULL && !dma_ops_domain(domain))
+		return ERR_PTR(-EBUSY);
 
-	*bdf = amd_iommu_alias_table[_bdf];
+	if (domain != NULL)
+		return domain;
 
-	*iommu = amd_iommu_rlookup_table[*bdf];
-	if (*iommu == NULL)
-		return 0;
-	*domain = domain_for_device(*bdf);
-	if (*domain == NULL) {
-		dma_dom = find_protection_domain(*bdf);
-		if (!dma_dom)
-			dma_dom = (*iommu)->default_dom;
-		*domain = &dma_dom->domain;
-		attach_device(*iommu, *domain, *bdf);
-		DUMP_printk("Using protection domain %d for device %s\n",
-			    (*domain)->id, dev_name(dev));
-	}
-
-	if (domain_for_device(_bdf) == NULL)
-		attach_device(*iommu, *domain, _bdf);
+	/* Device not bount yet - bind it */
+	dma_dom = find_protection_domain(devid);
+	if (!dma_dom)
+		dma_dom = amd_iommu_rlookup_table[devid]->default_dom;
+	attach_device(dev, &dma_dom->domain);
+	DUMP_printk("Using protection domain %d for device %s\n",
+		    dma_dom->domain.id, dev_name(dev));
 
-	return 1;
+	return &dma_dom->domain;
 }
 
 static void update_device_table(struct protection_domain *domain)
 {
-	unsigned long flags;
-	int i;
+	struct iommu_dev_data *dev_data;
 
-	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
-		if (amd_iommu_pd_table[i] != domain)
-			continue;
-		write_lock_irqsave(&amd_iommu_devtable_lock, flags);
-		set_dte_entry(i, domain);
-		write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+	list_for_each_entry(dev_data, &domain->dev_list, list) {
+		u16 devid = get_device_id(dev_data->dev);
+		set_dte_entry(devid, domain);
 	}
 }
 
@@ -1431,76 +1685,13 @@ static void update_domain(struct protection_domain *domain)
 		return;
 
 	update_device_table(domain);
-	flush_devices_by_domain(domain);
-	iommu_flush_domain(domain->id);
+	iommu_flush_domain_devices(domain);
+	iommu_flush_tlb_pde(domain);
 
 	domain->updated = false;
 }
 
 /*
- * This function is used to add another level to an IO page table. Adding
- * another level increases the size of the address space by 9 bits to a size up
- * to 64 bits.
- */
-static bool increase_address_space(struct protection_domain *domain,
-				   gfp_t gfp)
-{
-	u64 *pte;
-
-	if (domain->mode == PAGE_MODE_6_LEVEL)
-		/* address space already 64 bit large */
-		return false;
-
-	pte = (void *)get_zeroed_page(gfp);
-	if (!pte)
-		return false;
-
-	*pte             = PM_LEVEL_PDE(domain->mode,
-					virt_to_phys(domain->pt_root));
-	domain->pt_root  = pte;
-	domain->mode    += 1;
-	domain->updated  = true;
-
-	return true;
-}
-
-static u64 *alloc_pte(struct protection_domain *domain,
-		      unsigned long address,
-		      int end_lvl,
-		      u64 **pte_page,
-		      gfp_t gfp)
-{
-	u64 *pte, *page;
-	int level;
-
-	while (address > PM_LEVEL_SIZE(domain->mode))
-		increase_address_space(domain, gfp);
-
-	level =  domain->mode - 1;
-	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
-
-	while (level > end_lvl) {
-		if (!IOMMU_PTE_PRESENT(*pte)) {
-			page = (u64 *)get_zeroed_page(gfp);
-			if (!page)
-				return NULL;
-			*pte = PM_LEVEL_PDE(level, virt_to_phys(page));
-		}
-
-		level -= 1;
-
-		pte = IOMMU_PTE_PAGE(*pte);
-
-		if (pte_page && level == end_lvl)
-			*pte_page = pte;
-
-		pte = &pte[PM_LEVEL_INDEX(level, address)];
-	}
-
-	return pte;
-}
-
-/*
  * This function fetches the PTE for a given address in the aperture
  */
 static u64* dma_ops_get_pte(struct dma_ops_domain *dom,
@@ -1530,8 +1721,7 @@ static u64* dma_ops_get_pte(struct dma_ops_domain *dom,
  * This is the generic map function. It maps one 4kb page at paddr to
  * the given address in the DMA address space for the domain.
  */
-static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu,
-				     struct dma_ops_domain *dom,
+static dma_addr_t dma_ops_domain_map(struct dma_ops_domain *dom,
 				     unsigned long address,
 				     phys_addr_t paddr,
 				     int direction)
@@ -1544,7 +1734,7 @@ static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu,
 
 	pte  = dma_ops_get_pte(dom, address);
 	if (!pte)
-		return bad_dma_address;
+		return DMA_ERROR_CODE;
 
 	__pte = paddr | IOMMU_PTE_P | IOMMU_PTE_FC;
 
@@ -1565,8 +1755,7 @@ static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu,
 /*
  * The generic unmapping function for on page in the DMA address space.
  */
-static void dma_ops_domain_unmap(struct amd_iommu *iommu,
-				 struct dma_ops_domain *dom,
+static void dma_ops_domain_unmap(struct dma_ops_domain *dom,
 				 unsigned long address)
 {
 	struct aperture_range *aperture;
@@ -1597,7 +1786,6 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu,
  * Must be called with the domain lock held.
  */
 static dma_addr_t __map_single(struct device *dev,
-			       struct amd_iommu *iommu,
 			       struct dma_ops_domain *dma_dom,
 			       phys_addr_t paddr,
 			       size_t size,
@@ -1625,7 +1813,7 @@ static dma_addr_t __map_single(struct device *dev,
 retry:
 	address = dma_ops_alloc_addresses(dev, dma_dom, pages, align_mask,
 					  dma_mask);
-	if (unlikely(address == bad_dma_address)) {
+	if (unlikely(address == DMA_ERROR_CODE)) {
 		/*
 		 * setting next_address here will let the address
 		 * allocator only scan the new allocated range in the
@@ -1633,11 +1821,11 @@ retry:
 		 */
 		dma_dom->next_address = dma_dom->aperture_size;
 
-		if (alloc_new_range(iommu, dma_dom, false, GFP_ATOMIC))
+		if (alloc_new_range(dma_dom, false, GFP_ATOMIC))
 			goto out;
 
 		/*
-		 * aperture was sucessfully enlarged by 128 MB, try
+		 * aperture was successfully enlarged by 128 MB, try
 		 * allocation again
 		 */
 		goto retry;
@@ -1645,8 +1833,8 @@ retry:
 
 	start = address;
 	for (i = 0; i < pages; ++i) {
-		ret = dma_ops_domain_map(iommu, dma_dom, start, paddr, dir);
-		if (ret == bad_dma_address)
+		ret = dma_ops_domain_map(dma_dom, start, paddr, dir);
+		if (ret == DMA_ERROR_CODE)
 			goto out_unmap;
 
 		paddr += PAGE_SIZE;
@@ -1657,10 +1845,10 @@ retry:
 	ADD_STATS_COUNTER(alloced_io_mem, size);
 
 	if (unlikely(dma_dom->need_flush && !amd_iommu_unmap_flush)) {
-		iommu_flush_tlb(iommu, dma_dom->domain.id);
+		iommu_flush_tlb(&dma_dom->domain);
 		dma_dom->need_flush = false;
-	} else if (unlikely(iommu_has_npcache(iommu)))
-		iommu_flush_pages(iommu, dma_dom->domain.id, address, size);
+	} else if (unlikely(amd_iommu_np_cache))
+		iommu_flush_pages(&dma_dom->domain, address, size);
 
 out:
 	return address;
@@ -1669,20 +1857,19 @@ out_unmap:
 
 	for (--i; i >= 0; --i) {
 		start -= PAGE_SIZE;
-		dma_ops_domain_unmap(iommu, dma_dom, start);
+		dma_ops_domain_unmap(dma_dom, start);
 	}
 
 	dma_ops_free_addresses(dma_dom, address, pages);
 
-	return bad_dma_address;
+	return DMA_ERROR_CODE;
 }
 
 /*
  * Does the reverse of the __map_single function. Must be called with
  * the domain lock held too
  */
-static void __unmap_single(struct amd_iommu *iommu,
-			   struct dma_ops_domain *dma_dom,
+static void __unmap_single(struct dma_ops_domain *dma_dom,
 			   dma_addr_t dma_addr,
 			   size_t size,
 			   int dir)
@@ -1690,7 +1877,7 @@ static void __unmap_single(struct amd_iommu *iommu,
 	dma_addr_t i, start;
 	unsigned int pages;
 
-	if ((dma_addr == bad_dma_address) ||
+	if ((dma_addr == DMA_ERROR_CODE) ||
 	    (dma_addr + size > dma_dom->aperture_size))
 		return;
 
@@ -1699,7 +1886,7 @@ static void __unmap_single(struct amd_iommu *iommu,
 	start = dma_addr;
 
 	for (i = 0; i < pages; ++i) {
-		dma_ops_domain_unmap(iommu, dma_dom, start);
+		dma_ops_domain_unmap(dma_dom, start);
 		start += PAGE_SIZE;
 	}
 
@@ -1708,7 +1895,7 @@ static void __unmap_single(struct amd_iommu *iommu,
 	dma_ops_free_addresses(dma_dom, dma_addr, pages);
 
 	if (amd_iommu_unmap_flush || dma_dom->need_flush) {
-		iommu_flush_pages(iommu, dma_dom->domain.id, dma_addr, size);
+		iommu_flush_pages(&dma_dom->domain, dma_addr, size);
 		dma_dom->need_flush = false;
 	}
 }
@@ -1722,36 +1909,29 @@ static dma_addr_t map_page(struct device *dev, struct page *page,
 			   struct dma_attrs *attrs)
 {
 	unsigned long flags;
-	struct amd_iommu *iommu;
 	struct protection_domain *domain;
-	u16 devid;
 	dma_addr_t addr;
 	u64 dma_mask;
 	phys_addr_t paddr = page_to_phys(page) + offset;
 
 	INC_STATS_COUNTER(cnt_map_single);
 
-	if (!check_device(dev))
-		return bad_dma_address;
-
-	dma_mask = *dev->dma_mask;
-
-	get_device_resources(dev, &iommu, &domain, &devid);
-
-	if (iommu == NULL || domain == NULL)
-		/* device not handled by any AMD IOMMU */
+	domain = get_domain(dev);
+	if (PTR_ERR(domain) == -EINVAL)
 		return (dma_addr_t)paddr;
+	else if (IS_ERR(domain))
+		return DMA_ERROR_CODE;
 
-	if (!dma_ops_domain(domain))
-		return bad_dma_address;
+	dma_mask = *dev->dma_mask;
 
 	spin_lock_irqsave(&domain->lock, flags);
-	addr = __map_single(dev, iommu, domain->priv, paddr, size, dir, false,
+
+	addr = __map_single(dev, domain->priv, paddr, size, dir, false,
 			    dma_mask);
-	if (addr == bad_dma_address)
+	if (addr == DMA_ERROR_CODE)
 		goto out;
 
-	iommu_completion_wait(iommu);
+	iommu_flush_complete(domain);
 
 out:
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -1766,25 +1946,19 @@ static void unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
 		       enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	unsigned long flags;
-	struct amd_iommu *iommu;
 	struct protection_domain *domain;
-	u16 devid;
 
 	INC_STATS_COUNTER(cnt_unmap_single);
 
-	if (!check_device(dev) ||
-	    !get_device_resources(dev, &iommu, &domain, &devid))
-		/* device not handled by any AMD IOMMU */
-		return;
-
-	if (!dma_ops_domain(domain))
+	domain = get_domain(dev);
+	if (IS_ERR(domain))
 		return;
 
 	spin_lock_irqsave(&domain->lock, flags);
 
-	__unmap_single(iommu, domain->priv, dma_addr, size, dir);
+	__unmap_single(domain->priv, dma_addr, size, dir);
 
-	iommu_completion_wait(iommu);
+	iommu_flush_complete(domain);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
@@ -1816,9 +1990,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 		  struct dma_attrs *attrs)
 {
 	unsigned long flags;
-	struct amd_iommu *iommu;
 	struct protection_domain *domain;
-	u16 devid;
 	int i;
 	struct scatterlist *s;
 	phys_addr_t paddr;
@@ -1827,25 +1999,20 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 
 	INC_STATS_COUNTER(cnt_map_sg);
 
-	if (!check_device(dev))
+	domain = get_domain(dev);
+	if (PTR_ERR(domain) == -EINVAL)
+		return map_sg_no_iommu(dev, sglist, nelems, dir);
+	else if (IS_ERR(domain))
 		return 0;
 
 	dma_mask = *dev->dma_mask;
 
-	get_device_resources(dev, &iommu, &domain, &devid);
-
-	if (!iommu || !domain)
-		return map_sg_no_iommu(dev, sglist, nelems, dir);
-
-	if (!dma_ops_domain(domain))
-		return 0;
-
 	spin_lock_irqsave(&domain->lock, flags);
 
 	for_each_sg(sglist, s, nelems, i) {
 		paddr = sg_phys(s);
 
-		s->dma_address = __map_single(dev, iommu, domain->priv,
+		s->dma_address = __map_single(dev, domain->priv,
 					      paddr, s->length, dir, false,
 					      dma_mask);
 
@@ -1856,7 +2023,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 			goto unmap;
 	}
 
-	iommu_completion_wait(iommu);
+	iommu_flush_complete(domain);
 
 out:
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -1865,7 +2032,7 @@ out:
 unmap:
 	for_each_sg(sglist, s, mapped_elems, i) {
 		if (s->dma_address)
-			__unmap_single(iommu, domain->priv, s->dma_address,
+			__unmap_single(domain->priv, s->dma_address,
 				       s->dma_length, dir);
 		s->dma_address = s->dma_length = 0;
 	}
@@ -1884,30 +2051,25 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist,
 		     struct dma_attrs *attrs)
 {
 	unsigned long flags;
-	struct amd_iommu *iommu;
 	struct protection_domain *domain;
 	struct scatterlist *s;
-	u16 devid;
 	int i;
 
 	INC_STATS_COUNTER(cnt_unmap_sg);
 
-	if (!check_device(dev) ||
-	    !get_device_resources(dev, &iommu, &domain, &devid))
-		return;
-
-	if (!dma_ops_domain(domain))
+	domain = get_domain(dev);
+	if (IS_ERR(domain))
 		return;
 
 	spin_lock_irqsave(&domain->lock, flags);
 
 	for_each_sg(sglist, s, nelems, i) {
-		__unmap_single(iommu, domain->priv, s->dma_address,
+		__unmap_single(domain->priv, s->dma_address,
 			       s->dma_length, dir);
 		s->dma_address = s->dma_length = 0;
 	}
 
-	iommu_completion_wait(iommu);
+	iommu_flush_complete(domain);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
@@ -1920,49 +2082,44 @@ static void *alloc_coherent(struct device *dev, size_t size,
 {
 	unsigned long flags;
 	void *virt_addr;
-	struct amd_iommu *iommu;
 	struct protection_domain *domain;
-	u16 devid;
 	phys_addr_t paddr;
 	u64 dma_mask = dev->coherent_dma_mask;
 
 	INC_STATS_COUNTER(cnt_alloc_coherent);
 
-	if (!check_device(dev))
+	domain = get_domain(dev);
+	if (PTR_ERR(domain) == -EINVAL) {
+		virt_addr = (void *)__get_free_pages(flag, get_order(size));
+		*dma_addr = __pa(virt_addr);
+		return virt_addr;
+	} else if (IS_ERR(domain))
 		return NULL;
 
-	if (!get_device_resources(dev, &iommu, &domain, &devid))
-		flag &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
+	dma_mask  = dev->coherent_dma_mask;
+	flag     &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
+	flag     |= __GFP_ZERO;
 
-	flag |= __GFP_ZERO;
 	virt_addr = (void *)__get_free_pages(flag, get_order(size));
 	if (!virt_addr)
 		return NULL;
 
 	paddr = virt_to_phys(virt_addr);
 
-	if (!iommu || !domain) {
-		*dma_addr = (dma_addr_t)paddr;
-		return virt_addr;
-	}
-
-	if (!dma_ops_domain(domain))
-		goto out_free;
-
 	if (!dma_mask)
 		dma_mask = *dev->dma_mask;
 
 	spin_lock_irqsave(&domain->lock, flags);
 
-	*dma_addr = __map_single(dev, iommu, domain->priv, paddr,
+	*dma_addr = __map_single(dev, domain->priv, paddr,
 				 size, DMA_BIDIRECTIONAL, true, dma_mask);
 
-	if (*dma_addr == bad_dma_address) {
+	if (*dma_addr == DMA_ERROR_CODE) {
 		spin_unlock_irqrestore(&domain->lock, flags);
 		goto out_free;
 	}
 
-	iommu_completion_wait(iommu);
+	iommu_flush_complete(domain);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 
@@ -1982,28 +2139,19 @@ static void free_coherent(struct device *dev, size_t size,
 			  void *virt_addr, dma_addr_t dma_addr)
 {
 	unsigned long flags;
-	struct amd_iommu *iommu;
 	struct protection_domain *domain;
-	u16 devid;
 
 	INC_STATS_COUNTER(cnt_free_coherent);
 
-	if (!check_device(dev))
-		return;
-
-	get_device_resources(dev, &iommu, &domain, &devid);
-
-	if (!iommu || !domain)
-		goto free_mem;
-
-	if (!dma_ops_domain(domain))
+	domain = get_domain(dev);
+	if (IS_ERR(domain))
 		goto free_mem;
 
 	spin_lock_irqsave(&domain->lock, flags);
 
-	__unmap_single(iommu, domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
+	__unmap_single(domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
 
-	iommu_completion_wait(iommu);
+	iommu_flush_complete(domain);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 
@@ -2017,22 +2165,7 @@ free_mem:
  */
 static int amd_iommu_dma_supported(struct device *dev, u64 mask)
 {
-	u16 bdf;
-	struct pci_dev *pcidev;
-
-	/* No device or no PCI device */
-	if (!dev || dev->bus != &pci_bus_type)
-		return 0;
-
-	pcidev = to_pci_dev(dev);
-
-	bdf = calc_devid(pcidev->bus->number, pcidev->devfn);
-
-	/* Out of our scope? */
-	if (bdf > amd_iommu_last_bdf)
-		return 0;
-
-	return 1;
+	return check_device(dev);
 }
 
 /*
@@ -2046,25 +2179,28 @@ static void prealloc_protection_domains(void)
 {
 	struct pci_dev *dev = NULL;
 	struct dma_ops_domain *dma_dom;
-	struct amd_iommu *iommu;
 	u16 devid;
 
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		devid = calc_devid(dev->bus->number, dev->devfn);
-		if (devid > amd_iommu_last_bdf)
-			continue;
-		devid = amd_iommu_alias_table[devid];
-		if (domain_for_device(devid))
+
+		/* Do we handle this device? */
+		if (!check_device(&dev->dev))
 			continue;
-		iommu = amd_iommu_rlookup_table[devid];
-		if (!iommu)
+
+		/* Is there already any domain for it? */
+		if (domain_for_device(&dev->dev))
 			continue;
-		dma_dom = dma_ops_domain_alloc(iommu);
+
+		devid = get_device_id(&dev->dev);
+
+		dma_dom = dma_ops_domain_alloc();
 		if (!dma_dom)
 			continue;
 		init_unity_mappings_for_device(dma_dom, devid);
 		dma_dom->target_dev = devid;
 
+		attach_device(&dev->dev, &dma_dom->domain);
+
 		list_add_tail(&dma_dom->list, &iommu_pd_list);
 	}
 }
@@ -2093,7 +2229,7 @@ int __init amd_iommu_init_dma_ops(void)
 	 * protection domain will be assigned to the default one.
 	 */
 	for_each_iommu(iommu) {
-		iommu->default_dom = dma_ops_domain_alloc(iommu);
+		iommu->default_dom = dma_ops_domain_alloc();
 		if (iommu->default_dom == NULL)
 			return -ENOMEM;
 		iommu->default_dom->domain.flags |= PD_DEFAULT_MASK;
@@ -2103,15 +2239,12 @@ int __init amd_iommu_init_dma_ops(void)
 	}
 
 	/*
-	 * If device isolation is enabled, pre-allocate the protection
-	 * domains for each device.
+	 * Pre-allocate the protection domains for each device.
 	 */
-	if (amd_iommu_isolate)
-		prealloc_protection_domains();
+	prealloc_protection_domains();
 
 	iommu_detected = 1;
-	force_iommu = 1;
-	bad_dma_address = 0;
+	swiotlb = 0;
 #ifdef CONFIG_GART_IOMMU
 	gart_iommu_aperture_disabled = 1;
 	gart_iommu_aperture = 0;
@@ -2122,8 +2255,6 @@ int __init amd_iommu_init_dma_ops(void)
 
 	register_iommu(&amd_iommu_ops);
 
-	bus_register_notifier(&pci_bus_type, &device_nb);
-
 	amd_iommu_stats_init();
 
 	return 0;
@@ -2150,14 +2281,17 @@ free_domains:
 
 static void cleanup_domain(struct protection_domain *domain)
 {
+	struct iommu_dev_data *dev_data, *next;
 	unsigned long flags;
-	u16 devid;
 
 	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
 
-	for (devid = 0; devid <= amd_iommu_last_bdf; ++devid)
-		if (amd_iommu_pd_table[devid] == domain)
-			__detach_device(domain, devid);
+	list_for_each_entry_safe(dev_data, next, &domain->dev_list, list) {
+		struct device *dev = dev_data->dev;
+
+		do_detach(dev);
+		atomic_set(&dev_data->bind, 0);
+	}
 
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 }
@@ -2167,6 +2301,8 @@ static void protection_domain_free(struct protection_domain *domain)
 	if (!domain)
 		return;
 
+	del_domain_from_list(domain);
+
 	if (domain->id)
 		domain_id_free(domain->id);
 
@@ -2185,6 +2321,9 @@ static struct protection_domain *protection_domain_alloc(void)
 	domain->id = domain_id_alloc();
 	if (!domain->id)
 		goto out_err;
+	INIT_LIST_HEAD(&domain->dev_list);
+
+	add_domain_to_list(domain);
 
 	return domain;
 
@@ -2241,26 +2380,23 @@ static void amd_iommu_domain_destroy(struct iommu_domain *dom)
 static void amd_iommu_detach_device(struct iommu_domain *dom,
 				    struct device *dev)
 {
-	struct protection_domain *domain = dom->priv;
+	struct iommu_dev_data *dev_data = dev->archdata.iommu;
 	struct amd_iommu *iommu;
-	struct pci_dev *pdev;
 	u16 devid;
 
-	if (dev->bus != &pci_bus_type)
+	if (!check_device(dev))
 		return;
 
-	pdev = to_pci_dev(dev);
+	devid = get_device_id(dev);
 
-	devid = calc_devid(pdev->bus->number, pdev->devfn);
-
-	if (devid > 0)
-		detach_device(domain, devid);
+	if (dev_data->domain != NULL)
+		detach_device(dev);
 
 	iommu = amd_iommu_rlookup_table[devid];
 	if (!iommu)
 		return;
 
-	iommu_queue_inv_dev_entry(iommu, devid);
+	iommu_flush_device(dev);
 	iommu_completion_wait(iommu);
 }
 
@@ -2268,35 +2404,30 @@ static int amd_iommu_attach_device(struct iommu_domain *dom,
 				   struct device *dev)
 {
 	struct protection_domain *domain = dom->priv;
-	struct protection_domain *old_domain;
+	struct iommu_dev_data *dev_data;
 	struct amd_iommu *iommu;
-	struct pci_dev *pdev;
+	int ret;
 	u16 devid;
 
-	if (dev->bus != &pci_bus_type)
+	if (!check_device(dev))
 		return -EINVAL;
 
-	pdev = to_pci_dev(dev);
-
-	devid = calc_devid(pdev->bus->number, pdev->devfn);
+	dev_data = dev->archdata.iommu;
 
-	if (devid >= amd_iommu_last_bdf ||
-			devid != amd_iommu_alias_table[devid])
-		return -EINVAL;
+	devid = get_device_id(dev);
 
 	iommu = amd_iommu_rlookup_table[devid];
 	if (!iommu)
 		return -EINVAL;
 
-	old_domain = domain_for_device(devid);
-	if (old_domain)
-		detach_device(old_domain, devid);
+	if (dev_data->domain)
+		detach_device(dev);
 
-	attach_device(iommu, domain, devid);
+	ret = attach_device(dev, domain);
 
 	iommu_completion_wait(iommu);
 
-	return 0;
+	return ret;
 }
 
 static int amd_iommu_map_range(struct iommu_domain *dom,
@@ -2342,7 +2473,7 @@ static void amd_iommu_unmap_range(struct iommu_domain *dom,
 		iova  += PAGE_SIZE;
 	}
 
-	iommu_flush_domain(domain->id);
+	iommu_flush_tlb_pde(domain);
 }
 
 static phys_addr_t amd_iommu_iova_to_phys(struct iommu_domain *dom,
@@ -2393,10 +2524,11 @@ static struct iommu_ops amd_iommu_ops = {
 
 int __init amd_iommu_init_passthrough(void)
 {
+	struct amd_iommu *iommu;
 	struct pci_dev *dev = NULL;
-	u16 devid, devid2;
+	u16 devid;
 
-	/* allocate passthroug domain */
+	/* allocate passthrough domain */
 	pt_domain = protection_domain_alloc();
 	if (!pt_domain)
 		return -ENOMEM;
@@ -2404,20 +2536,17 @@ int __init amd_iommu_init_passthrough(void)
 	pt_domain->mode |= PAGE_MODE_NONE;
 
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		struct amd_iommu *iommu;
 
-		devid = calc_devid(dev->bus->number, dev->devfn);
-		if (devid > amd_iommu_last_bdf)
+		if (!check_device(&dev->dev))
 			continue;
 
-		devid2 = amd_iommu_alias_table[devid];
+		devid = get_device_id(&dev->dev);
 
-		iommu = amd_iommu_rlookup_table[devid2];
+		iommu = amd_iommu_rlookup_table[devid];
 		if (!iommu)
 			continue;
 
-		__attach_device(iommu, pt_domain, devid);
-		__attach_device(iommu, pt_domain, devid2);
+		attach_device(&dev->dev, pt_domain);
 	}
 
 	pr_info("AMD-Vi: Initialized for Passthrough Mode\n");
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index c20001e4f556..1dca9c34eaeb 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2007-2009 Advanced Micro Devices, Inc.
  * Author: Joerg Roedel <joerg.roedel@amd.com>
  *         Leo Duran <leo.duran@amd.com>
  *
@@ -25,10 +25,12 @@
 #include <linux/interrupt.h>
 #include <linux/msi.h>
 #include <asm/pci-direct.h>
+#include <asm/amd_iommu_proto.h>
 #include <asm/amd_iommu_types.h>
 #include <asm/amd_iommu.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
+#include <asm/x86_init.h>
 
 /*
  * definitions for the ACPI scanning code
@@ -123,18 +125,24 @@ u16 amd_iommu_last_bdf;			/* largest PCI device id we have
 					   to handle */
 LIST_HEAD(amd_iommu_unity_map);		/* a list of required unity mappings
 					   we find in ACPI */
-#ifdef CONFIG_IOMMU_STRESS
-bool amd_iommu_isolate = false;
-#else
-bool amd_iommu_isolate = true;		/* if true, device isolation is
-					   enabled */
-#endif
-
 bool amd_iommu_unmap_flush;		/* if true, flush on every unmap */
 
 LIST_HEAD(amd_iommu_list);		/* list of all AMD IOMMUs in the
 					   system */
 
+/* Array to assign indices to IOMMUs*/
+struct amd_iommu *amd_iommus[MAX_IOMMUS];
+int amd_iommus_present;
+
+/* IOMMUs have a non-present cache? */
+bool amd_iommu_np_cache __read_mostly;
+
+/*
+ * List of protection domains - used during resume
+ */
+LIST_HEAD(amd_iommu_pd_list);
+spinlock_t amd_iommu_pd_lock;
+
 /*
  * Pointer to the device table which is shared by all AMD IOMMUs
  * it is indexed by the PCI device id or the HT unit id and contains
@@ -157,12 +165,6 @@ u16 *amd_iommu_alias_table;
 struct amd_iommu **amd_iommu_rlookup_table;
 
 /*
- * The pd table (protection domain table) is used to find the protection domain
- * data structure a device belongs to. Indexed with the PCI device id too.
- */
-struct protection_domain **amd_iommu_pd_table;
-
-/*
  * AMD IOMMU allows up to 2^16 differend protection domains. This is a bitmap
  * to know which ones are already in use.
  */
@@ -838,7 +840,18 @@ static void __init free_iommu_all(void)
 static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 {
 	spin_lock_init(&iommu->lock);
+
+	/* Add IOMMU to internal data structures */
 	list_add_tail(&iommu->list, &amd_iommu_list);
+	iommu->index             = amd_iommus_present++;
+
+	if (unlikely(iommu->index >= MAX_IOMMUS)) {
+		WARN(1, "AMD-Vi: System has more IOMMUs than supported by this driver\n");
+		return -ENOSYS;
+	}
+
+	/* Index is fine - add IOMMU to the array */
+	amd_iommus[iommu->index] = iommu;
 
 	/*
 	 * Copy data from ACPI table entry to the iommu struct
@@ -868,6 +881,9 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 	init_iommu_from_acpi(iommu, h);
 	init_iommu_devices(iommu);
 
+	if (iommu->cap & (1UL << IOMMU_CAP_NPCACHE))
+		amd_iommu_np_cache = true;
+
 	return pci_enable_device(iommu->dev);
 }
 
@@ -925,7 +941,7 @@ static int __init init_iommu_all(struct acpi_table_header *table)
  *
  ****************************************************************************/
 
-static int __init iommu_setup_msi(struct amd_iommu *iommu)
+static int iommu_setup_msi(struct amd_iommu *iommu)
 {
 	int r;
 
@@ -1176,19 +1192,10 @@ static struct sys_device device_amd_iommu = {
  * functions. Finally it prints some information about AMD IOMMUs and
  * the driver state and enables the hardware.
  */
-int __init amd_iommu_init(void)
+static int __init amd_iommu_init(void)
 {
 	int i, ret = 0;
 
-
-	if (no_iommu) {
-		printk(KERN_INFO "AMD-Vi disabled by kernel command line\n");
-		return 0;
-	}
-
-	if (!amd_iommu_detected)
-		return -ENODEV;
-
 	/*
 	 * First parse ACPI tables to find the largest Bus/Dev/Func
 	 * we need to handle. Upon this information the shared data
@@ -1225,15 +1232,6 @@ int __init amd_iommu_init(void)
 	if (amd_iommu_rlookup_table == NULL)
 		goto free;
 
-	/*
-	 * Protection Domain table - maps devices to protection domains
-	 * This table has the same size as the rlookup_table
-	 */
-	amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
-				     get_order(rlookup_table_size));
-	if (amd_iommu_pd_table == NULL)
-		goto free;
-
 	amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(
 					    GFP_KERNEL | __GFP_ZERO,
 					    get_order(MAX_DOMAIN_ID/8));
@@ -1255,6 +1253,8 @@ int __init amd_iommu_init(void)
 	 */
 	amd_iommu_pd_alloc_bitmap[0] = 1;
 
+	spin_lock_init(&amd_iommu_pd_lock);
+
 	/*
 	 * now the data structures are allocated and basically initialized
 	 * start the real acpi table scan
@@ -1274,6 +1274,10 @@ int __init amd_iommu_init(void)
 	if (ret)
 		goto free;
 
+	ret = amd_iommu_init_devices();
+	if (ret)
+		goto free;
+
 	if (iommu_pass_through)
 		ret = amd_iommu_init_passthrough();
 	else
@@ -1281,32 +1285,29 @@ int __init amd_iommu_init(void)
 	if (ret)
 		goto free;
 
+	amd_iommu_init_notifier();
+
 	enable_iommus();
 
 	if (iommu_pass_through)
 		goto out;
 
-	printk(KERN_INFO "AMD-Vi: device isolation ");
-	if (amd_iommu_isolate)
-		printk("enabled\n");
-	else
-		printk("disabled\n");
-
 	if (amd_iommu_unmap_flush)
 		printk(KERN_INFO "AMD-Vi: IO/TLB flush on unmap enabled\n");
 	else
 		printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n");
 
+	x86_platform.iommu_shutdown = disable_iommus;
 out:
 	return ret;
 
 free:
+
+	amd_iommu_uninit_devices();
+
 	free_pages((unsigned long)amd_iommu_pd_alloc_bitmap,
 		   get_order(MAX_DOMAIN_ID/8));
 
-	free_pages((unsigned long)amd_iommu_pd_table,
-		   get_order(rlookup_table_size));
-
 	free_pages((unsigned long)amd_iommu_rlookup_table,
 		   get_order(rlookup_table_size));
 
@@ -1323,11 +1324,6 @@ free:
 	goto out;
 }
 
-void amd_iommu_shutdown(void)
-{
-	disable_iommus();
-}
-
 /****************************************************************************
  *
  * Early detect code. This code runs at IOMMU detection time in the DMA
@@ -1342,16 +1338,16 @@ static int __init early_amd_iommu_detect(struct acpi_table_header *table)
 
 void __init amd_iommu_detect(void)
 {
-	if (swiotlb || no_iommu || (iommu_detected && !gart_iommu_aperture))
+	if (no_iommu || (iommu_detected && !gart_iommu_aperture))
 		return;
 
 	if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) {
 		iommu_detected = 1;
 		amd_iommu_detected = 1;
-#ifdef CONFIG_GART_IOMMU
-		gart_iommu_aperture_disabled = 1;
-		gart_iommu_aperture = 0;
-#endif
+		x86_init.iommu.iommu_init = amd_iommu_init;
+
+		/* Make sure ACS will be enabled */
+		pci_request_acs();
 	}
 }
 
@@ -1372,10 +1368,6 @@ static int __init parse_amd_iommu_dump(char *str)
 static int __init parse_amd_iommu_options(char *str)
 {
 	for (; *str; ++str) {
-		if (strncmp(str, "isolate", 7) == 0)
-			amd_iommu_isolate = true;
-		if (strncmp(str, "share", 5) == 0)
-			amd_iommu_isolate = false;
 		if (strncmp(str, "fullflush", 9) == 0)
 			amd_iommu_unmap_flush = true;
 	}
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 128111d8ffe0..e0dfb6856aa2 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -28,6 +28,7 @@
 #include <asm/pci-direct.h>
 #include <asm/dma.h>
 #include <asm/k8.h>
+#include <asm/x86_init.h>
 
 int gart_iommu_aperture;
 int gart_iommu_aperture_disabled __initdata;
@@ -400,6 +401,7 @@ void __init gart_iommu_hole_init(void)
 
 			iommu_detected = 1;
 			gart_iommu_aperture = 1;
+			x86_init.iommu.iommu_init = gart_iommu_init;
 
 			aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7;
 			aper_size = (32 * 1024 * 1024) << aper_order;
@@ -456,7 +458,7 @@ out:
 
 	if (aper_alloc) {
 		/* Got the aperture from the AGP bridge */
-	} else if (swiotlb && !valid_agp) {
+	} else if (!valid_agp) {
 		/* Do nothing */
 	} else if ((!no_iommu && max_pfn > MAX_DMA32_PFN) ||
 		   force_iommu ||
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index da7b7b9f8bd8..565c1bfc507d 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -2,7 +2,7 @@
 # Makefile for local APIC drivers and for the IO-APIC code
 #
 
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o probe_$(BITS).o ipi.o nmi.o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o probe_$(BITS).o ipi.o nmi.o
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_SMP)		+= ipi.o
 
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 894aa97f0717..efb2b9cd132c 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -241,28 +241,13 @@ static int modern_apic(void)
 }
 
 /*
- * bare function to substitute write operation
- * and it's _that_ fast :)
- */
-static void native_apic_write_dummy(u32 reg, u32 v)
-{
-	WARN_ON_ONCE((cpu_has_apic || !disable_apic));
-}
-
-static u32 native_apic_read_dummy(u32 reg)
-{
-	WARN_ON_ONCE((cpu_has_apic && !disable_apic));
-	return 0;
-}
-
-/*
- * right after this call apic->write/read doesn't do anything
- * note that there is no restore operation it works one way
+ * right after this call apic become NOOP driven
+ * so apic->write/read doesn't do anything
  */
 void apic_disable(void)
 {
-	apic->read = native_apic_read_dummy;
-	apic->write = native_apic_write_dummy;
+	pr_info("APIC: switched to apic NOOP\n");
+	apic = &apic_noop;
 }
 
 void native_apic_wait_icr_idle(void)
@@ -459,7 +444,7 @@ static void lapic_timer_setup(enum clock_event_mode mode,
 		v = apic_read(APIC_LVTT);
 		v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
 		apic_write(APIC_LVTT, v);
-		apic_write(APIC_TMICT, 0xffffffff);
+		apic_write(APIC_TMICT, 0);
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		/* Nothing to do here */
@@ -662,7 +647,7 @@ static int __init calibrate_APIC_clock(void)
 	calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS;
 
 	apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta);
-	apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult);
+	apic_printk(APIC_VERBOSE, "..... mult: %u\n", lapic_clockevent.mult);
 	apic_printk(APIC_VERBOSE, "..... calibration result: %u\n",
 		    calibration_result);
 
@@ -1392,14 +1377,11 @@ void __init enable_IR_x2apic(void)
 	unsigned long flags;
 	struct IO_APIC_route_entry **ioapic_entries = NULL;
 	int ret, x2apic_enabled = 0;
-	int dmar_table_init_ret = 0;
+	int dmar_table_init_ret;
 
-#ifdef CONFIG_INTR_REMAP
 	dmar_table_init_ret = dmar_table_init();
-	if (dmar_table_init_ret)
-		pr_debug("dmar_table_init() failed with %d:\n",
-				dmar_table_init_ret);
-#endif
+	if (dmar_table_init_ret && !x2apic_supported())
+		return;
 
 	ioapic_entries = alloc_ioapic_entries();
 	if (!ioapic_entries) {
diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c
new file mode 100644
index 000000000000..e31b9ffe25f5
--- /dev/null
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -0,0 +1,200 @@
+/*
+ * NOOP APIC driver.
+ *
+ * Does almost nothing and should be substituted by a real apic driver via
+ * probe routine.
+ *
+ * Though in case if apic is disabled (for some reason) we try
+ * to not uglify the caller's code and allow to call (some) apic routines
+ * like self-ipi, etc...
+ */
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
+#include <asm/apicdef.h>
+#include <asm/apic.h>
+#include <asm/setup.h>
+
+#include <linux/smp.h>
+#include <asm/ipi.h>
+
+#include <linux/interrupt.h>
+#include <asm/acpi.h>
+#include <asm/e820.h>
+
+static void noop_init_apic_ldr(void) { }
+static void noop_send_IPI_mask(const struct cpumask *cpumask, int vector) { }
+static void noop_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector) { }
+static void noop_send_IPI_allbutself(int vector) { }
+static void noop_send_IPI_all(int vector) { }
+static void noop_send_IPI_self(int vector) { }
+static void noop_apic_wait_icr_idle(void) { }
+static void noop_apic_icr_write(u32 low, u32 id) { }
+
+static int noop_wakeup_secondary_cpu(int apicid, unsigned long start_eip)
+{
+	return -1;
+}
+
+static u32 noop_safe_apic_wait_icr_idle(void)
+{
+	return 0;
+}
+
+static u64 noop_apic_icr_read(void)
+{
+	return 0;
+}
+
+static int noop_cpu_to_logical_apicid(int cpu)
+{
+	return 0;
+}
+
+static int noop_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return 0;
+}
+
+static unsigned int noop_get_apic_id(unsigned long x)
+{
+	return 0;
+}
+
+static int noop_probe(void)
+{
+	/*
+	 * NOOP apic should not ever be
+	 * enabled via probe routine
+	 */
+	return 0;
+}
+
+static int noop_apic_id_registered(void)
+{
+	/*
+	 * if we would be really "pedantic"
+	 * we should pass read_apic_id() here
+	 * but since NOOP suppose APIC ID = 0
+	 * lets save a few cycles
+	 */
+	return physid_isset(0, phys_cpu_present_map);
+}
+
+static const struct cpumask *noop_target_cpus(void)
+{
+	/* only BSP here */
+	return cpumask_of(0);
+}
+
+static unsigned long noop_check_apicid_used(physid_mask_t *map, int apicid)
+{
+	return physid_isset(apicid, *map);
+}
+
+static unsigned long noop_check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+static void noop_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+	if (cpu != 0)
+		pr_warning("APIC: Vector allocated for non-BSP cpu\n");
+	cpumask_clear(retmask);
+	cpumask_set_cpu(cpu, retmask);
+}
+
+int noop_apicid_to_node(int logical_apicid)
+{
+	/* we're always on node 0 */
+	return 0;
+}
+
+static u32 noop_apic_read(u32 reg)
+{
+	WARN_ON_ONCE((cpu_has_apic && !disable_apic));
+	return 0;
+}
+
+static void noop_apic_write(u32 reg, u32 v)
+{
+	WARN_ON_ONCE(cpu_has_apic && !disable_apic);
+}
+
+struct apic apic_noop = {
+	.name				= "noop",
+	.probe				= noop_probe,
+	.acpi_madt_oem_check		= NULL,
+
+	.apic_id_registered		= noop_apic_id_registered,
+
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* logical delivery broadcast to all CPUs: */
+	.irq_dest_mode			= 1,
+
+	.target_cpus			= noop_target_cpus,
+	.disable_esr			= 0,
+	.dest_logical			= APIC_DEST_LOGICAL,
+	.check_apicid_used		= noop_check_apicid_used,
+	.check_apicid_present		= noop_check_apicid_present,
+
+	.vector_allocation_domain	= noop_vector_allocation_domain,
+	.init_apic_ldr			= noop_init_apic_ldr,
+
+	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
+	.setup_apic_routing		= NULL,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= noop_apicid_to_node,
+
+	.cpu_to_logical_apicid		= noop_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= physid_set_mask_of_physid,
+
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+
+	.phys_pkg_id			= noop_phys_pkg_id,
+
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= noop_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0x0F << 24,
+
+	.cpu_mask_to_apicid		= default_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= noop_send_IPI_mask,
+	.send_IPI_mask_allbutself	= noop_send_IPI_mask_allbutself,
+	.send_IPI_allbutself		= noop_send_IPI_allbutself,
+	.send_IPI_all			= noop_send_IPI_all,
+	.send_IPI_self			= noop_send_IPI_self,
+
+	.wakeup_secondary_cpu		= noop_wakeup_secondary_cpu,
+
+	/* should be safe */
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+
+	.wait_for_init_deassert		= NULL,
+
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= NULL,
+
+	.read				= noop_apic_read,
+	.write				= noop_apic_write,
+	.icr_read			= noop_apic_icr_read,
+	.icr_write			= noop_apic_icr_write,
+	.wait_icr_idle			= noop_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= noop_safe_apic_wait_icr_idle,
+};
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 77a06413b6b2..38dcecfa5818 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -35,7 +35,7 @@ static const struct cpumask *bigsmp_target_cpus(void)
 #endif
 }
 
-static unsigned long bigsmp_check_apicid_used(physid_mask_t bitmap, int apicid)
+static unsigned long bigsmp_check_apicid_used(physid_mask_t *map, int apicid)
 {
 	return 0;
 }
@@ -93,11 +93,6 @@ static int bigsmp_cpu_present_to_apicid(int mps_cpu)
 	return BAD_APICID;
 }
 
-static physid_mask_t bigsmp_apicid_to_cpu_present(int phys_apicid)
-{
-	return physid_mask_of_physid(phys_apicid);
-}
-
 /* Mapping from cpu number to logical apicid */
 static inline int bigsmp_cpu_to_logical_apicid(int cpu)
 {
@@ -106,10 +101,10 @@ static inline int bigsmp_cpu_to_logical_apicid(int cpu)
 	return cpu_physical_id(cpu);
 }
 
-static physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map)
+static void bigsmp_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xFFL);
+	physids_promote(0xFFL, retmap);
 }
 
 static int bigsmp_check_phys_apicid_present(int phys_apicid)
@@ -230,7 +225,7 @@ struct apic apic_bigsmp = {
 	.apicid_to_node			= bigsmp_apicid_to_node,
 	.cpu_to_logical_apicid		= bigsmp_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= bigsmp_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= bigsmp_apicid_to_cpu_present,
+	.apicid_to_cpu_present		= physid_set_mask_of_physid,
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= bigsmp_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 89174f847b49..dd2b5f264643 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -27,6 +27,9 @@
  *
  * http://www.unisys.com
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/notifier.h>
 #include <linux/spinlock.h>
 #include <linux/cpumask.h>
@@ -223,9 +226,9 @@ static int parse_unisys_oem(char *oemptr)
 			mip_addr = val;
 			mip = (struct mip_reg *)val;
 			mip_reg = __va(mip);
-			pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
+			pr_debug("host_reg = 0x%lx\n",
 				 (unsigned long)host_reg);
-			pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
+			pr_debug("mip_reg = 0x%lx\n",
 				 (unsigned long)mip_reg);
 			success++;
 			break;
@@ -401,7 +404,7 @@ static void es7000_enable_apic_mode(void)
 	if (!es7000_plat)
 		return;
 
-	printk(KERN_INFO "ES7000: Enabling APIC mode.\n");
+	pr_info("Enabling APIC mode.\n");
 	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
 	es7000_mip_reg.off_0x00 = MIP_SW_APIC;
 	es7000_mip_reg.off_0x38 = MIP_VALID;
@@ -466,11 +469,11 @@ static const struct cpumask *es7000_target_cpus(void)
 	return cpumask_of(smp_processor_id());
 }
 
-static unsigned long
-es7000_check_apicid_used(physid_mask_t bitmap, int apicid)
+static unsigned long es7000_check_apicid_used(physid_mask_t *map, int apicid)
 {
 	return 0;
 }
+
 static unsigned long es7000_check_apicid_present(int bit)
 {
 	return physid_isset(bit, phys_cpu_present_map);
@@ -514,8 +517,7 @@ static void es7000_setup_apic_routing(void)
 {
 	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
 
-	printk(KERN_INFO
-	  "Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
+	pr_info("Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
 		(apic_version[apic] == 0x14) ?
 			"Physical Cluster" : "Logical Cluster",
 		nr_ioapics, cpumask_bits(es7000_target_cpus())[0]);
@@ -539,14 +541,10 @@ static int es7000_cpu_present_to_apicid(int mps_cpu)
 
 static int cpu_id;
 
-static physid_mask_t es7000_apicid_to_cpu_present(int phys_apicid)
+static void es7000_apicid_to_cpu_present(int phys_apicid, physid_mask_t *retmap)
 {
-	physid_mask_t mask;
-
-	mask = physid_mask_of_physid(cpu_id);
+	physid_set_mask_of_physid(cpu_id, retmap);
 	++cpu_id;
-
-	return mask;
 }
 
 /* Mapping from cpu number to logical apicid */
@@ -561,10 +559,10 @@ static int es7000_cpu_to_logical_apicid(int cpu)
 #endif
 }
 
-static physid_mask_t es7000_ioapic_phys_id_map(physid_mask_t phys_map)
+static void es7000_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xff);
+	physids_promote(0xFFL, retmap);
 }
 
 static int es7000_check_phys_apicid_present(int cpu_physical_apicid)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index dc69f28489f5..d5d498fbee4b 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -60,8 +60,6 @@
 #include <asm/irq_remapping.h>
 #include <asm/hpet.h>
 #include <asm/hw_irq.h>
-#include <asm/uv/uv_hub.h>
-#include <asm/uv/uv_irq.h>
 
 #include <asm/apic.h>
 
@@ -140,20 +138,6 @@ static struct irq_pin_list *get_one_free_irq_2_pin(int node)
 	return pin;
 }
 
-/*
- * This is performance-critical, we want to do it O(1)
- *
- * Most irqs are mapped 1:1 with pins.
- */
-struct irq_cfg {
-	struct irq_pin_list *irq_2_pin;
-	cpumask_var_t domain;
-	cpumask_var_t old_domain;
-	unsigned move_cleanup_count;
-	u8 vector;
-	u8 move_in_progress : 1;
-};
-
 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
 #ifdef CONFIG_SPARSE_IRQ
 static struct irq_cfg irq_cfgx[] = {
@@ -209,7 +193,7 @@ int __init arch_early_irq_init(void)
 }
 
 #ifdef CONFIG_SPARSE_IRQ
-static struct irq_cfg *irq_cfg(unsigned int irq)
+struct irq_cfg *irq_cfg(unsigned int irq)
 {
 	struct irq_cfg *cfg = NULL;
 	struct irq_desc *desc;
@@ -361,7 +345,7 @@ void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc)
 /* end for move_irq_desc */
 
 #else
-static struct irq_cfg *irq_cfg(unsigned int irq)
+struct irq_cfg *irq_cfg(unsigned int irq)
 {
 	return irq < nr_irqs ? irq_cfgx + irq : NULL;
 }
@@ -555,23 +539,41 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
 	add_pin_to_irq_node(cfg, node, newapic, newpin);
 }
 
+static void __io_apic_modify_irq(struct irq_pin_list *entry,
+				 int mask_and, int mask_or,
+				 void (*final)(struct irq_pin_list *entry))
+{
+	unsigned int reg, pin;
+
+	pin = entry->pin;
+	reg = io_apic_read(entry->apic, 0x10 + pin * 2);
+	reg &= mask_and;
+	reg |= mask_or;
+	io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
+	if (final)
+		final(entry);
+}
+
 static void io_apic_modify_irq(struct irq_cfg *cfg,
 			       int mask_and, int mask_or,
 			       void (*final)(struct irq_pin_list *entry))
 {
-	int pin;
 	struct irq_pin_list *entry;
 
-	for_each_irq_pin(entry, cfg->irq_2_pin) {
-		unsigned int reg;
-		pin = entry->pin;
-		reg = io_apic_read(entry->apic, 0x10 + pin * 2);
-		reg &= mask_and;
-		reg |= mask_or;
-		io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
-		if (final)
-			final(entry);
-	}
+	for_each_irq_pin(entry, cfg->irq_2_pin)
+		__io_apic_modify_irq(entry, mask_and, mask_or, final);
+}
+
+static void __mask_and_edge_IO_APIC_irq(struct irq_pin_list *entry)
+{
+	__io_apic_modify_irq(entry, ~IO_APIC_REDIR_LEVEL_TRIGGER,
+			     IO_APIC_REDIR_MASKED, NULL);
+}
+
+static void __unmask_and_level_IO_APIC_irq(struct irq_pin_list *entry)
+{
+	__io_apic_modify_irq(entry, ~IO_APIC_REDIR_MASKED,
+			     IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
 }
 
 static void __unmask_IO_APIC_irq(struct irq_cfg *cfg)
@@ -595,18 +597,6 @@ static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
 	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
 }
 
-static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg)
-{
-	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_LEVEL_TRIGGER,
-			IO_APIC_REDIR_MASKED, NULL);
-}
-
-static void __unmask_and_level_IO_APIC_irq(struct irq_cfg *cfg)
-{
-	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED,
-			IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
-}
-
 static void mask_IO_APIC_irq_desc(struct irq_desc *desc)
 {
 	struct irq_cfg *cfg = desc->chip_data;
@@ -1177,7 +1167,7 @@ __assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
 	int cpu, err;
 	cpumask_var_t tmp_mask;
 
-	if ((cfg->move_in_progress) || cfg->move_cleanup_count)
+	if (cfg->move_in_progress)
 		return -EBUSY;
 
 	if (!alloc_cpumask_var(&tmp_mask, GFP_ATOMIC))
@@ -1237,8 +1227,7 @@ next:
 	return err;
 }
 
-static int
-assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
+int assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
 {
 	int err;
 	unsigned long flags;
@@ -1599,9 +1588,6 @@ __apicdebuginit(void) print_IO_APIC(void)
 	struct irq_desc *desc;
 	unsigned int irq;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (i = 0; i < nr_ioapics; i++)
 		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
@@ -1708,9 +1694,6 @@ __apicdebuginit(void) print_APIC_field(int base)
 {
 	int i;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG);
 
 	for (i = 0; i < 8; i++)
@@ -1724,9 +1707,6 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
 	unsigned int i, v, ver, maxlvt;
 	u64 icr;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
@@ -1824,13 +1804,19 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
 	printk("\n");
 }
 
-__apicdebuginit(void) print_all_local_APICs(void)
+__apicdebuginit(void) print_local_APICs(int maxcpu)
 {
 	int cpu;
 
+	if (!maxcpu)
+		return;
+
 	preempt_disable();
-	for_each_online_cpu(cpu)
+	for_each_online_cpu(cpu) {
+		if (cpu >= maxcpu)
+			break;
 		smp_call_function_single(cpu, print_local_APIC, NULL, 1);
+	}
 	preempt_enable();
 }
 
@@ -1839,7 +1825,7 @@ __apicdebuginit(void) print_PIC(void)
 	unsigned int v;
 	unsigned long flags;
 
-	if (apic_verbosity == APIC_QUIET || !nr_legacy_irqs)
+	if (!nr_legacy_irqs)
 		return;
 
 	printk(KERN_DEBUG "\nprinting PIC contents\n");
@@ -1866,21 +1852,41 @@ __apicdebuginit(void) print_PIC(void)
 	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
 }
 
-__apicdebuginit(int) print_all_ICs(void)
+static int __initdata show_lapic = 1;
+static __init int setup_show_lapic(char *arg)
 {
+	int num = -1;
+
+	if (strcmp(arg, "all") == 0) {
+		show_lapic = CONFIG_NR_CPUS;
+	} else {
+		get_option(&arg, &num);
+		if (num >= 0)
+			show_lapic = num;
+	}
+
+	return 1;
+}
+__setup("show_lapic=", setup_show_lapic);
+
+__apicdebuginit(int) print_ICs(void)
+{
+	if (apic_verbosity == APIC_QUIET)
+		return 0;
+
 	print_PIC();
 
 	/* don't print out if apic is not there */
 	if (!cpu_has_apic && !apic_from_smp_config())
 		return 0;
 
-	print_all_local_APICs();
+	print_local_APICs(show_lapic);
 	print_IO_APIC();
 
 	return 0;
 }
 
-fs_initcall(print_all_ICs);
+fs_initcall(print_ICs);
 
 
 /* Where if anywhere is the i8259 connect in external int mode */
@@ -2031,7 +2037,7 @@ void __init setup_ioapic_ids_from_mpc(void)
 	 * This is broken; anything with a real cpu count has to
 	 * circumvent this idiocy regardless.
 	 */
-	phys_id_present_map = apic->ioapic_phys_id_map(phys_cpu_present_map);
+	apic->ioapic_phys_id_map(&phys_cpu_present_map, &phys_id_present_map);
 
 	/*
 	 * Set the IOAPIC ID to the value stored in the MPC table.
@@ -2058,7 +2064,7 @@ void __init setup_ioapic_ids_from_mpc(void)
 		 * system must have a unique ID or we get lots of nice
 		 * 'stuck on smp_invalidate_needed IPI wait' messages.
 		 */
-		if (apic->check_apicid_used(phys_id_present_map,
+		if (apic->check_apicid_used(&phys_id_present_map,
 					mp_ioapics[apic_id].apicid)) {
 			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
 				apic_id, mp_ioapics[apic_id].apicid);
@@ -2073,7 +2079,7 @@ void __init setup_ioapic_ids_from_mpc(void)
 			mp_ioapics[apic_id].apicid = i;
 		} else {
 			physid_mask_t tmp;
-			tmp = apic->apicid_to_cpu_present(mp_ioapics[apic_id].apicid);
+			apic->apicid_to_cpu_present(mp_ioapics[apic_id].apicid, &tmp);
 			apic_printk(APIC_VERBOSE, "Setting %d in the "
 					"phys_id_present_map\n",
 					mp_ioapics[apic_id].apicid);
@@ -2228,20 +2234,16 @@ static int ioapic_retrigger_irq(unsigned int irq)
  */
 
 #ifdef CONFIG_SMP
-static void send_cleanup_vector(struct irq_cfg *cfg)
+void send_cleanup_vector(struct irq_cfg *cfg)
 {
 	cpumask_var_t cleanup_mask;
 
 	if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
 		unsigned int i;
-		cfg->move_cleanup_count = 0;
-		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
-			cfg->move_cleanup_count++;
 		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
 			apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
 	} else {
 		cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
-		cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
 		apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
 		free_cpumask_var(cleanup_mask);
 	}
@@ -2272,15 +2274,12 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq
 	}
 }
 
-static int
-assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
-
 /*
  * Either sets desc->affinity to a valid value, and returns
  * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
  * leaves desc->affinity untouched.
  */
-static unsigned int
+unsigned int
 set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
 {
 	struct irq_cfg *cfg;
@@ -2433,8 +2432,6 @@ asmlinkage void smp_irq_move_cleanup_interrupt(void)
 
 		cfg = irq_cfg(irq);
 		spin_lock(&desc->lock);
-		if (!cfg->move_cleanup_count)
-			goto unlock;
 
 		if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
 			goto unlock;
@@ -2452,7 +2449,6 @@ asmlinkage void smp_irq_move_cleanup_interrupt(void)
 			goto unlock;
 		}
 		__get_cpu_var(vector_irq)[vector] = -1;
-		cfg->move_cleanup_count--;
 unlock:
 		spin_unlock(&desc->lock);
 	}
@@ -2460,21 +2456,33 @@ unlock:
 	irq_exit();
 }
 
-static void irq_complete_move(struct irq_desc **descp)
+static void __irq_complete_move(struct irq_desc **descp, unsigned vector)
 {
 	struct irq_desc *desc = *descp;
 	struct irq_cfg *cfg = desc->chip_data;
-	unsigned vector, me;
+	unsigned me;
 
 	if (likely(!cfg->move_in_progress))
 		return;
 
-	vector = ~get_irq_regs()->orig_ax;
 	me = smp_processor_id();
 
 	if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
 		send_cleanup_vector(cfg);
 }
+
+static void irq_complete_move(struct irq_desc **descp)
+{
+	__irq_complete_move(descp, ~get_irq_regs()->orig_ax);
+}
+
+void irq_force_complete_move(int irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	struct irq_cfg *cfg = desc->chip_data;
+
+	__irq_complete_move(&desc, cfg->vector);
+}
 #else
 static inline void irq_complete_move(struct irq_desc **descp) {}
 #endif
@@ -2490,6 +2498,59 @@ static void ack_apic_edge(unsigned int irq)
 
 atomic_t irq_mis_count;
 
+/*
+ * IO-APIC versions below 0x20 don't support EOI register.
+ * For the record, here is the information about various versions:
+ *     0Xh     82489DX
+ *     1Xh     I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant
+ *     2Xh     I/O(x)APIC which is PCI 2.2 Compliant
+ *     30h-FFh Reserved
+ *
+ * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic
+ * version as 0x2. This is an error with documentation and these ICH chips
+ * use io-apic's of version 0x20.
+ *
+ * For IO-APIC's with EOI register, we use that to do an explicit EOI.
+ * Otherwise, we simulate the EOI message manually by changing the trigger
+ * mode to edge and then back to level, with RTE being masked during this.
+*/
+static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
+{
+	struct irq_pin_list *entry;
+
+	for_each_irq_pin(entry, cfg->irq_2_pin) {
+		if (mp_ioapics[entry->apic].apicver >= 0x20) {
+			/*
+			 * Intr-remapping uses pin number as the virtual vector
+			 * in the RTE. Actual vector is programmed in
+			 * intr-remapping table entry. Hence for the io-apic
+			 * EOI we use the pin number.
+			 */
+			if (irq_remapped(irq))
+				io_apic_eoi(entry->apic, entry->pin);
+			else
+				io_apic_eoi(entry->apic, cfg->vector);
+		} else {
+			__mask_and_edge_IO_APIC_irq(entry);
+			__unmask_and_level_IO_APIC_irq(entry);
+		}
+	}
+}
+
+static void eoi_ioapic_irq(struct irq_desc *desc)
+{
+	struct irq_cfg *cfg;
+	unsigned long flags;
+	unsigned int irq;
+
+	irq = desc->irq;
+	cfg = desc->chip_data;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	__eoi_ioapic_irq(irq, cfg);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
 static void ack_apic_level(unsigned int irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
@@ -2525,6 +2586,19 @@ static void ack_apic_level(unsigned int irq)
 	 * level-triggered interrupt.  We mask the source for the time of the
 	 * operation to prevent an edge-triggered interrupt escaping meanwhile.
 	 * The idea is from Manfred Spraul.  --macro
+	 *
+	 * Also in the case when cpu goes offline, fixup_irqs() will forward
+	 * any unhandled interrupt on the offlined cpu to the new cpu
+	 * destination that is handling the corresponding interrupt. This
+	 * interrupt forwarding is done via IPI's. Hence, in this case also
+	 * level-triggered io-apic interrupt will be seen as an edge
+	 * interrupt in the IRR. And we can't rely on the cpu's EOI
+	 * to be broadcasted to the IO-APIC's which will clear the remoteIRR
+	 * corresponding to the level-triggered interrupt. Hence on IO-APIC's
+	 * supporting EOI register, we do an explicit EOI to clear the
+	 * remote IRR and on IO-APIC's which don't have an EOI register,
+	 * we use the above logic (mask+edge followed by unmask+level) from
+	 * Manfred Spraul to clear the remote IRR.
 	 */
 	cfg = desc->chip_data;
 	i = cfg->vector;
@@ -2536,6 +2610,19 @@ static void ack_apic_level(unsigned int irq)
 	 */
 	ack_APIC_irq();
 
+	/*
+	 * Tail end of clearing remote IRR bit (either by delivering the EOI
+	 * message via io-apic EOI register write or simulating it using
+	 * mask+edge followed by unnask+level logic) manually when the
+	 * level triggered interrupt is seen as the edge triggered interrupt
+	 * at the cpu.
+	 */
+	if (!(v & (1 << (i & 0x1f)))) {
+		atomic_inc(&irq_mis_count);
+
+		eoi_ioapic_irq(desc);
+	}
+
 	/* Now we can move and renable the irq */
 	if (unlikely(do_unmask_irq)) {
 		/* Only migrate the irq if the ack has been received.
@@ -2569,41 +2656,9 @@ static void ack_apic_level(unsigned int irq)
 			move_masked_irq(irq);
 		unmask_IO_APIC_irq_desc(desc);
 	}
-
-	/* Tail end of version 0x11 I/O APIC bug workaround */
-	if (!(v & (1 << (i & 0x1f)))) {
-		atomic_inc(&irq_mis_count);
-		spin_lock(&ioapic_lock);
-		__mask_and_edge_IO_APIC_irq(cfg);
-		__unmask_and_level_IO_APIC_irq(cfg);
-		spin_unlock(&ioapic_lock);
-	}
 }
 
 #ifdef CONFIG_INTR_REMAP
-static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
-{
-	struct irq_pin_list *entry;
-
-	for_each_irq_pin(entry, cfg->irq_2_pin)
-		io_apic_eoi(entry->apic, entry->pin);
-}
-
-static void
-eoi_ioapic_irq(struct irq_desc *desc)
-{
-	struct irq_cfg *cfg;
-	unsigned long flags;
-	unsigned int irq;
-
-	irq = desc->irq;
-	cfg = desc->chip_data;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__eoi_ioapic_irq(irq, cfg);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
 static void ir_ack_apic_edge(unsigned int irq)
 {
 	ack_APIC_irq();
@@ -3157,6 +3212,7 @@ unsigned int create_irq_nr(unsigned int irq_want, int node)
 			continue;
 
 		desc_new = move_irq_desc(desc_new, node);
+		cfg_new = desc_new->chip_data;
 
 		if (__assign_irq_vector(new, cfg_new, apic->target_cpus()) == 0)
 			irq = new;
@@ -3211,7 +3267,8 @@ void destroy_irq(unsigned int irq)
  * MSI message composition
  */
 #ifdef CONFIG_PCI_MSI
-static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
+static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq,
+			   struct msi_msg *msg, u8 hpet_id)
 {
 	struct irq_cfg *cfg;
 	int err;
@@ -3245,7 +3302,10 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 		irte.dest_id = IRTE_DEST(dest);
 
 		/* Set source-id of interrupt request */
-		set_msi_sid(&irte, pdev);
+		if (pdev)
+			set_msi_sid(&irte, pdev);
+		else
+			set_hpet_sid(&irte, hpet_id);
 
 		modify_irte(irq, &irte);
 
@@ -3410,7 +3470,7 @@ static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq)
 	int ret;
 	struct msi_msg msg;
 
-	ret = msi_compose_msg(dev, irq, &msg);
+	ret = msi_compose_msg(dev, irq, &msg, -1);
 	if (ret < 0)
 		return ret;
 
@@ -3543,7 +3603,7 @@ int arch_setup_dmar_msi(unsigned int irq)
 	int ret;
 	struct msi_msg msg;
 
-	ret = msi_compose_msg(NULL, irq, &msg);
+	ret = msi_compose_msg(NULL, irq, &msg, -1);
 	if (ret < 0)
 		return ret;
 	dmar_msi_write(irq, &msg);
@@ -3583,6 +3643,19 @@ static int hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 #endif /* CONFIG_SMP */
 
+static struct irq_chip ir_hpet_msi_type = {
+	.name = "IR-HPET_MSI",
+	.unmask = hpet_msi_unmask,
+	.mask = hpet_msi_mask,
+#ifdef CONFIG_INTR_REMAP
+	.ack = ir_ack_apic_edge,
+#ifdef CONFIG_SMP
+	.set_affinity = ir_set_msi_irq_affinity,
+#endif
+#endif
+	.retrigger = ioapic_retrigger_irq,
+};
+
 static struct irq_chip hpet_msi_type = {
 	.name = "HPET_MSI",
 	.unmask = hpet_msi_unmask,
@@ -3594,20 +3667,36 @@ static struct irq_chip hpet_msi_type = {
 	.retrigger = ioapic_retrigger_irq,
 };
 
-int arch_setup_hpet_msi(unsigned int irq)
+int arch_setup_hpet_msi(unsigned int irq, unsigned int id)
 {
 	int ret;
 	struct msi_msg msg;
 	struct irq_desc *desc = irq_to_desc(irq);
 
-	ret = msi_compose_msg(NULL, irq, &msg);
+	if (intr_remapping_enabled) {
+		struct intel_iommu *iommu = map_hpet_to_ir(id);
+		int index;
+
+		if (!iommu)
+			return -1;
+
+		index = alloc_irte(iommu, irq, 1);
+		if (index < 0)
+			return -1;
+	}
+
+	ret = msi_compose_msg(NULL, irq, &msg, id);
 	if (ret < 0)
 		return ret;
 
 	hpet_msi_write(irq, &msg);
 	desc->status |= IRQ_MOVE_PCNTXT;
-	set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq,
-		"edge");
+	if (irq_remapped(irq))
+		set_irq_chip_and_handler_name(irq, &ir_hpet_msi_type,
+					      handle_edge_irq, "edge");
+	else
+		set_irq_chip_and_handler_name(irq, &hpet_msi_type,
+					      handle_edge_irq, "edge");
 
 	return 0;
 }
@@ -3708,75 +3797,6 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 }
 #endif /* CONFIG_HT_IRQ */
 
-#ifdef CONFIG_X86_UV
-/*
- * Re-target the irq to the specified CPU and enable the specified MMR located
- * on the specified blade to allow the sending of MSIs to the specified CPU.
- */
-int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
-		       unsigned long mmr_offset)
-{
-	const struct cpumask *eligible_cpu = cpumask_of(cpu);
-	struct irq_cfg *cfg;
-	int mmr_pnode;
-	unsigned long mmr_value;
-	struct uv_IO_APIC_route_entry *entry;
-	unsigned long flags;
-	int err;
-
-	BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
-
-	cfg = irq_cfg(irq);
-
-	err = assign_irq_vector(irq, cfg, eligible_cpu);
-	if (err != 0)
-		return err;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	set_irq_chip_and_handler_name(irq, &uv_irq_chip, handle_percpu_irq,
-				      irq_name);
-	spin_unlock_irqrestore(&vector_lock, flags);
-
-	mmr_value = 0;
-	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
-	entry->vector		= cfg->vector;
-	entry->delivery_mode	= apic->irq_delivery_mode;
-	entry->dest_mode	= apic->irq_dest_mode;
-	entry->polarity		= 0;
-	entry->trigger		= 0;
-	entry->mask		= 0;
-	entry->dest		= apic->cpu_mask_to_apicid(eligible_cpu);
-
-	mmr_pnode = uv_blade_to_pnode(mmr_blade);
-	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
-
-	if (cfg->move_in_progress)
-		send_cleanup_vector(cfg);
-
-	return irq;
-}
-
-/*
- * Disable the specified MMR located on the specified blade so that MSIs are
- * longer allowed to be sent.
- */
-void arch_disable_uv_irq(int mmr_blade, unsigned long mmr_offset)
-{
-	unsigned long mmr_value;
-	struct uv_IO_APIC_route_entry *entry;
-	int mmr_pnode;
-
-	BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
-
-	mmr_value = 0;
-	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
-	entry->mask = 1;
-
-	mmr_pnode = uv_blade_to_pnode(mmr_blade);
-	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
-}
-#endif /* CONFIG_X86_64 */
-
 int __init io_apic_get_redir_entries (int ioapic)
 {
 	union IO_APIC_reg_01	reg_01;
@@ -3944,7 +3964,7 @@ int __init io_apic_get_unique_id(int ioapic, int apic_id)
 	 */
 
 	if (physids_empty(apic_id_map))
-		apic_id_map = apic->ioapic_phys_id_map(phys_cpu_present_map);
+		apic->ioapic_phys_id_map(&phys_cpu_present_map, &apic_id_map);
 
 	spin_lock_irqsave(&ioapic_lock, flags);
 	reg_00.raw = io_apic_read(ioapic, 0);
@@ -3960,10 +3980,10 @@ int __init io_apic_get_unique_id(int ioapic, int apic_id)
 	 * Every APIC in a system must have a unique ID or we get lots of nice
 	 * 'stuck on smp_invalidate_needed IPI wait' messages.
 	 */
-	if (apic->check_apicid_used(apic_id_map, apic_id)) {
+	if (apic->check_apicid_used(&apic_id_map, apic_id)) {
 
 		for (i = 0; i < get_physical_broadcast(); i++) {
-			if (!apic->check_apicid_used(apic_id_map, i))
+			if (!apic->check_apicid_used(&apic_id_map, i))
 				break;
 		}
 
@@ -3976,7 +3996,7 @@ int __init io_apic_get_unique_id(int ioapic, int apic_id)
 		apic_id = i;
 	}
 
-	tmp = apic->apicid_to_cpu_present(apic_id);
+	apic->apicid_to_cpu_present(apic_id, &tmp);
 	physids_or(apic_id_map, apic_id_map, tmp);
 
 	if (reg_00.bits.ID != apic_id) {
@@ -4106,7 +4126,7 @@ static struct resource * __init ioapic_setup_resources(int nr_ioapics)
 	for (i = 0; i < nr_ioapics; i++) {
 		res[i].name = mem;
 		res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		sprintf(mem,  "IOAPIC %u", i);
+		snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i);
 		mem += IOAPIC_RESOURCE_NAME_SIZE;
 	}
 
@@ -4140,18 +4160,17 @@ void __init ioapic_init_mappings(void)
 #ifdef CONFIG_X86_32
 fake_ioapic_page:
 #endif
-			ioapic_phys = (unsigned long)
-				alloc_bootmem_pages(PAGE_SIZE);
+			ioapic_phys = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
 			ioapic_phys = __pa(ioapic_phys);
 		}
 		set_fixmap_nocache(idx, ioapic_phys);
-		apic_printk(APIC_VERBOSE,
-			    "mapped IOAPIC to %08lx (%08lx)\n",
-			    __fix_to_virt(idx), ioapic_phys);
+		apic_printk(APIC_VERBOSE, "mapped IOAPIC to %08lx (%08lx)\n",
+			__fix_to_virt(idx) + (ioapic_phys & ~PAGE_MASK),
+			ioapic_phys);
 		idx++;
 
 		ioapic_res->start = ioapic_phys;
-		ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
+		ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1;
 		ioapic_res++;
 	}
 }
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index 7ff61d6a188a..6389432a9dbf 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -39,7 +39,8 @@
 int unknown_nmi_panic;
 int nmi_watchdog_enabled;
 
-static cpumask_t backtrace_mask __read_mostly;
+/* For reliability, we're prepared to waste bits here. */
+static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
 
 /* nmi_active:
  * >0: the lapic NMI watchdog is active, but can be disabled
@@ -414,7 +415,7 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 	}
 
 	/* We can be called before check_nmi_watchdog, hence NULL check. */
-	if (cpumask_test_cpu(cpu, &backtrace_mask)) {
+	if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) {
 		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
 
 		spin_lock(&lock);
@@ -422,7 +423,7 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 		show_regs(regs);
 		dump_stack();
 		spin_unlock(&lock);
-		cpumask_clear_cpu(cpu, &backtrace_mask);
+		cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask));
 
 		rc = 1;
 	}
@@ -558,14 +559,14 @@ void arch_trigger_all_cpu_backtrace(void)
 {
 	int i;
 
-	cpumask_copy(&backtrace_mask, cpu_online_mask);
+	cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask);
 
 	printk(KERN_INFO "sending NMI to all CPUs:\n");
 	apic->send_IPI_all(NMI_VECTOR);
 
 	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
 	for (i = 0; i < 10 * 1000; i++) {
-		if (cpumask_empty(&backtrace_mask))
+		if (cpumask_empty(to_cpumask(backtrace_mask)))
 			break;
 		mdelay(1);
 	}
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index efa00e2b8505..98c4665f251c 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -264,11 +264,6 @@ static void __init smp_read_mpc_oem(struct mpc_table *mpc)
 static __init void early_check_numaq(void)
 {
 	/*
-	 * Find possible boot-time SMP configuration:
-	 */
-	early_find_smp_config();
-
-	/*
 	 * get boot-time SMP configuration:
 	 */
 	if (smp_found_config)
@@ -334,10 +329,9 @@ static inline const struct cpumask *numaq_target_cpus(void)
 	return cpu_all_mask;
 }
 
-static inline unsigned long
-numaq_check_apicid_used(physid_mask_t bitmap, int apicid)
+static unsigned long numaq_check_apicid_used(physid_mask_t *map, int apicid)
 {
-	return physid_isset(apicid, bitmap);
+	return physid_isset(apicid, *map);
 }
 
 static inline unsigned long numaq_check_apicid_present(int bit)
@@ -371,10 +365,10 @@ static inline int numaq_multi_timer_check(int apic, int irq)
 	return apic != 0 && irq == 0;
 }
 
-static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
+static inline void numaq_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
 {
 	/* We don't have a good way to do this yet - hack */
-	return physids_promote(0xFUL);
+	return physids_promote(0xFUL, retmap);
 }
 
 static inline int numaq_cpu_to_logical_apicid(int cpu)
@@ -402,12 +396,12 @@ static inline int numaq_apicid_to_node(int logical_apicid)
 	return logical_apicid >> 4;
 }
 
-static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
+static void numaq_apicid_to_cpu_present(int logical_apicid, physid_mask_t *retmap)
 {
 	int node = numaq_apicid_to_node(logical_apicid);
 	int cpu = __ffs(logical_apicid & 0xf);
 
-	return physid_mask_of_physid(cpu + 4*node);
+	physid_set_mask_of_physid(cpu + 4*node, retmap);
 }
 
 /* Where the IO area was mapped on multiquad, always 0 otherwise */
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 0c0182cc947d..1a6559f6768c 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -108,7 +108,7 @@ struct apic apic_default = {
 	.apicid_to_node			= default_apicid_to_node,
 	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= default_apicid_to_cpu_present,
+	.apicid_to_cpu_present		= physid_set_mask_of_physid,
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index 645ecc4ff0be..9b419263d90d 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -183,7 +183,7 @@ static const struct cpumask *summit_target_cpus(void)
 	return cpumask_of(0);
 }
 
-static unsigned long summit_check_apicid_used(physid_mask_t bitmap, int apicid)
+static unsigned long summit_check_apicid_used(physid_mask_t *map, int apicid)
 {
 	return 0;
 }
@@ -261,15 +261,15 @@ static int summit_cpu_present_to_apicid(int mps_cpu)
 		return BAD_APICID;
 }
 
-static physid_mask_t summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
+static void summit_ioapic_phys_id_map(physid_mask_t *phys_id_map, physid_mask_t *retmap)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0x0F);
+	physids_promote(0x0FL, retmap);
 }
 
-static physid_mask_t summit_apicid_to_cpu_present(int apicid)
+static void summit_apicid_to_cpu_present(int apicid, physid_mask_t *retmap)
 {
-	return physid_mask_of_physid(0);
+	physid_set_mask_of_physid(0, retmap);
 }
 
 static int summit_check_phys_apicid_present(int physical_apicid)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 326c25477d3d..b684bb303cbf 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -30,10 +30,22 @@
 #include <asm/apic.h>
 #include <asm/ipi.h>
 #include <asm/smp.h>
+#include <asm/x86_init.h>
 
 DEFINE_PER_CPU(int, x2apic_extra_bits);
 
 static enum uv_system_type uv_system_type;
+static u64 gru_start_paddr, gru_end_paddr;
+
+static inline bool is_GRU_range(u64 start, u64 end)
+{
+	return start >= gru_start_paddr && end <= gru_end_paddr;
+}
+
+static bool uv_is_untracked_pat_range(u64 start, u64 end)
+{
+	return is_ISA_range(start, end) || is_GRU_range(start, end);
+}
 
 static int early_get_nodeid(void)
 {
@@ -49,6 +61,7 @@ static int early_get_nodeid(void)
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (!strcmp(oem_id, "SGI")) {
+		x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
 		if (!strcmp(oem_table_id, "UVL"))
 			uv_system_type = UV_LEGACY_APIC;
 		else if (!strcmp(oem_table_id, "UVX"))
@@ -385,8 +398,12 @@ static __init void map_gru_high(int max_pnode)
 	int shift = UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT;
 
 	gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
-	if (gru.s.enable)
+	if (gru.s.enable) {
 		map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
+		gru_start_paddr = ((u64)gru.s.base << shift);
+		gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1);
+
+	}
 }
 
 static __init void map_mmr_high(int max_pnode)
@@ -409,6 +426,12 @@ static __init void map_mmioh_high(int max_pnode)
 		map_high("MMIOH", mmioh.s.base, shift, max_pnode, map_uc);
 }
 
+static __init void map_low_mmrs(void)
+{
+	init_extra_mapping_uc(UV_GLOBAL_MMR32_BASE, UV_GLOBAL_MMR32_SIZE);
+	init_extra_mapping_uc(UV_LOCAL_MMR_BASE, UV_LOCAL_MMR_SIZE);
+}
+
 static __init void uv_rtc_init(void)
 {
 	long status;
@@ -550,6 +573,8 @@ void __init uv_system_init(void)
 	unsigned long mmr_base, present, paddr;
 	unsigned short pnode_mask;
 
+	map_low_mmrs();
+
 	m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
 	m_val = m_n_config.s.m_skt;
 	n_val = m_n_config.s.n_skt;
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 151ace69a5aa..b5b6b23bce53 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -204,7 +204,6 @@
 #include <linux/module.h>
 
 #include <linux/poll.h>
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <linux/timer.h>
@@ -403,6 +402,7 @@ static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
 static struct apm_user *user_list;
 static DEFINE_SPINLOCK(user_list_lock);
+static DEFINE_MUTEX(apm_mutex);
 
 /*
  * Set up a segment that references the real mode segment 0x40
@@ -1531,7 +1531,7 @@ static long do_ioctl(struct file *filp, u_int cmd, u_long arg)
 		return -EPERM;
 	switch (cmd) {
 	case APM_IOC_STANDBY:
-		lock_kernel();
+		mutex_lock(&apm_mutex);
 		if (as->standbys_read > 0) {
 			as->standbys_read--;
 			as->standbys_pending--;
@@ -1540,10 +1540,10 @@ static long do_ioctl(struct file *filp, u_int cmd, u_long arg)
 			queue_event(APM_USER_STANDBY, as);
 		if (standbys_pending <= 0)
 			standby();
-		unlock_kernel();
+		mutex_unlock(&apm_mutex);
 		break;
 	case APM_IOC_SUSPEND:
-		lock_kernel();
+		mutex_lock(&apm_mutex);
 		if (as->suspends_read > 0) {
 			as->suspends_read--;
 			as->suspends_pending--;
@@ -1552,13 +1552,14 @@ static long do_ioctl(struct file *filp, u_int cmd, u_long arg)
 			queue_event(APM_USER_SUSPEND, as);
 		if (suspends_pending <= 0) {
 			ret = suspend(1);
+			mutex_unlock(&apm_mutex);
 		} else {
 			as->suspend_wait = 1;
+			mutex_unlock(&apm_mutex);
 			wait_event_interruptible(apm_suspend_waitqueue,
 					as->suspend_wait == 0);
 			ret = as->suspend_result;
 		}
-		unlock_kernel();
 		return ret;
 	default:
 		return -ENOTTY;
@@ -1608,12 +1609,10 @@ static int do_open(struct inode *inode, struct file *filp)
 {
 	struct apm_user *as;
 
-	lock_kernel();
 	as = kmalloc(sizeof(*as), GFP_KERNEL);
 	if (as == NULL) {
 		printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n",
 		       sizeof(*as));
-		       unlock_kernel();
 		return -ENOMEM;
 	}
 	as->magic = APM_BIOS_MAGIC;
@@ -1635,7 +1634,6 @@ static int do_open(struct inode *inode, struct file *filp)
 	user_list = as;
 	spin_unlock(&user_list_lock);
 	filp->private_data = as;
-	unlock_kernel();
 	return 0;
 }
 
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 68537e957a9b..1d2cb383410e 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -5,6 +5,7 @@
 # Don't trace early stages of a secondary CPU boot
 ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_common.o = -pg
+CFLAGS_REMOVE_perf_event.o = -pg
 endif
 
 # Make sure load_percpu_segment has no stackprotector
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index c910a716a71c..7128b3799cec 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -535,7 +535,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		}
 	}
 
-	display_cacheinfo(c);
+	cpu_detect_cache_sizes(c);
 
 	/* Multi core CPU? */
 	if (c->extended_cpuid_level >= 0x80000008) {
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index c95e831bb095..e58d978e0758 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -294,7 +294,7 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c)
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 	}
 
-	display_cacheinfo(c);
+	cpu_detect_cache_sizes(c);
 }
 
 enum {
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index cc25c2b4a567..c1afa990a6c8 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -61,7 +61,7 @@ void __init setup_cpu_local_masks(void)
 static void __cpuinit default_init(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_X86_64
-	display_cacheinfo(c);
+	cpu_detect_cache_sizes(c);
 #else
 	/* Not much we can do here... */
 	/* Check if at least it has cpuid */
@@ -383,7 +383,7 @@ static void __cpuinit get_model_name(struct cpuinfo_x86 *c)
 	}
 }
 
-void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
+void __cpuinit cpu_detect_cache_sizes(struct cpuinfo_x86 *c)
 {
 	unsigned int n, dummy, ebx, ecx, edx, l2size;
 
@@ -391,8 +391,6 @@ void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
 
 	if (n >= 0x80000005) {
 		cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
-		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
-				edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
 		c->x86_cache_size = (ecx>>24) + (edx>>24);
 #ifdef CONFIG_X86_64
 		/* On K8 L1 TLB is inclusive, so don't count it */
@@ -422,9 +420,6 @@ void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
 #endif
 
 	c->x86_cache_size = l2size;
-
-	printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
-			l2size, ecx & 0xFF);
 }
 
 void __cpuinit detect_ht(struct cpuinfo_x86 *c)
@@ -659,24 +654,31 @@ void __init early_cpu_init(void)
 	const struct cpu_dev *const *cdev;
 	int count = 0;
 
+#ifdef PROCESSOR_SELECT
 	printk(KERN_INFO "KERNEL supported cpus:\n");
+#endif
+
 	for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) {
 		const struct cpu_dev *cpudev = *cdev;
-		unsigned int j;
 
 		if (count >= X86_VENDOR_NUM)
 			break;
 		cpu_devs[count] = cpudev;
 		count++;
 
-		for (j = 0; j < 2; j++) {
-			if (!cpudev->c_ident[j])
-				continue;
-			printk(KERN_INFO "  %s %s\n", cpudev->c_vendor,
-				cpudev->c_ident[j]);
+#ifdef PROCESSOR_SELECT
+		{
+			unsigned int j;
+
+			for (j = 0; j < 2; j++) {
+				if (!cpudev->c_ident[j])
+					continue;
+				printk(KERN_INFO "  %s %s\n", cpudev->c_vendor,
+					cpudev->c_ident[j]);
+			}
 		}
+#endif
 	}
-
 	early_identify_cpu(&boot_cpu_data);
 }
 
@@ -837,10 +839,8 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
 	}
 
-#ifdef CONFIG_X86_MCE
 	/* Init Machine Check Exception if available. */
-	mcheck_init(c);
-#endif
+	mcheck_cpu_init(c);
 
 	select_idle_routine(c);
 
@@ -1136,7 +1136,7 @@ void __cpuinit cpu_init(void)
 	wrmsrl(MSR_KERNEL_GS_BASE, 0);
 	barrier();
 
-	check_efer();
+	x86_configure_nx();
 	if (cpu != 0)
 		enable_x2apic();
 
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index 6de9a908e400..3624e8a0f71b 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -32,6 +32,6 @@ struct cpu_dev {
 extern const struct cpu_dev *const __x86_cpu_dev_start[],
 			    *const __x86_cpu_dev_end[];
 
-extern void display_cacheinfo(struct cpuinfo_x86 *c);
+extern void cpu_detect_cache_sizes(struct cpuinfo_x86 *c);
 
 #endif
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 8b581d3905cb..d2e7c77c1ea4 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -764,14 +764,15 @@ static struct freq_attr *acpi_cpufreq_attr[] = {
 };
 
 static struct cpufreq_driver acpi_cpufreq_driver = {
-	.verify = acpi_cpufreq_verify,
-	.target = acpi_cpufreq_target,
-	.init = acpi_cpufreq_cpu_init,
-	.exit = acpi_cpufreq_cpu_exit,
-	.resume = acpi_cpufreq_resume,
-	.name = "acpi-cpufreq",
-	.owner = THIS_MODULE,
-	.attr = acpi_cpufreq_attr,
+	.verify		= acpi_cpufreq_verify,
+	.target		= acpi_cpufreq_target,
+	.bios_limit	= acpi_processor_get_bios_limit,
+	.init		= acpi_cpufreq_cpu_init,
+	.exit		= acpi_cpufreq_cpu_exit,
+	.resume		= acpi_cpufreq_resume,
+	.name		= "acpi-cpufreq",
+	.owner		= THIS_MODULE,
+	.attr		= acpi_cpufreq_attr,
 };
 
 static int __init acpi_cpufreq_init(void)
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c
index cabd2fa3fc93..7e7eea4f8261 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c
@@ -885,7 +885,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 
 	/* Find ACPI data for processor */
 	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
-				ACPI_UINT32_MAX, &longhaul_walk_callback,
+				ACPI_UINT32_MAX, &longhaul_walk_callback, NULL,
 				NULL, (void *)&pr);
 
 	/* Check ACPI support for C3 state */
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
index f10dea409f40..cb01dac267d3 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
@@ -164,7 +164,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	/* cpuinfo and default policy values */
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cpuinfo.transition_latency = 200000;
 	policy->cur = busfreq * max_multiplier;
 
 	result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
index d47c775eb0ab..9a97116f89e5 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
@@ -714,14 +714,17 @@ static struct freq_attr *powernow_table_attr[] = {
 };
 
 static struct cpufreq_driver powernow_driver = {
-	.verify	= powernow_verify,
-	.target	= powernow_target,
-	.get	= powernow_get,
-	.init	= powernow_cpu_init,
-	.exit	= powernow_cpu_exit,
-	.name	= "powernow-k7",
-	.owner	= THIS_MODULE,
-	.attr	= powernow_table_attr,
+	.verify		= powernow_verify,
+	.target		= powernow_target,
+	.get		= powernow_get,
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
+	.bios_limit	= acpi_processor_get_bios_limit,
+#endif
+	.init		= powernow_cpu_init,
+	.exit		= powernow_cpu_exit,
+	.name		= "powernow-k7",
+	.owner		= THIS_MODULE,
+	.attr		= powernow_table_attr,
 };
 
 static int __init powernow_init(void)
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 3f12dabeab52..a9df9441a9a2 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1118,7 +1118,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data,
 static int powernowk8_target(struct cpufreq_policy *pol,
 		unsigned targfreq, unsigned relation)
 {
-	cpumask_t oldmask;
+	cpumask_var_t oldmask;
 	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
 	u32 checkfid;
 	u32 checkvid;
@@ -1131,9 +1131,13 @@ static int powernowk8_target(struct cpufreq_policy *pol,
 	checkfid = data->currfid;
 	checkvid = data->currvid;
 
-	/* only run on specific CPU from here on */
-	oldmask = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
+	/* only run on specific CPU from here on. */
+	/* This is poor form: use a workqueue or smp_call_function_single */
+	if (!alloc_cpumask_var(&oldmask, GFP_KERNEL))
+		return -ENOMEM;
+
+	cpumask_copy(oldmask, tsk_cpumask(current));
+	set_cpus_allowed_ptr(current, cpumask_of(pol->cpu));
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1193,7 +1197,8 @@ static int powernowk8_target(struct cpufreq_policy *pol,
 	ret = 0;
 
 err_out:
-	set_cpus_allowed_ptr(current, &oldmask);
+	set_cpus_allowed_ptr(current, oldmask);
+	free_cpumask_var(oldmask);
 	return ret;
 }
 
@@ -1393,14 +1398,15 @@ static struct freq_attr *powernow_k8_attr[] = {
 };
 
 static struct cpufreq_driver cpufreq_amd64_driver = {
-	.verify = powernowk8_verify,
-	.target = powernowk8_target,
-	.init = powernowk8_cpu_init,
-	.exit = __devexit_p(powernowk8_cpu_exit),
-	.get = powernowk8_get,
-	.name = "powernow-k8",
-	.owner = THIS_MODULE,
-	.attr = powernow_k8_attr,
+	.verify		= powernowk8_verify,
+	.target		= powernowk8_target,
+	.bios_limit	= acpi_processor_get_bios_limit,
+	.init		= powernowk8_cpu_init,
+	.exit		= __devexit_p(powernowk8_cpu_exit),
+	.get		= powernowk8_get,
+	.name		= "powernow-k8",
+	.owner		= THIS_MODULE,
+	.attr		= powernow_k8_attr,
 };
 
 /* driver entry point for init */
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index 3ae5a7a3a500..2ce8e0b5cc54 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -39,7 +39,7 @@ static struct pci_dev *speedstep_chipset_dev;
 
 /* speedstep_processor
  */
-static unsigned int speedstep_processor;
+static enum speedstep_processor speedstep_processor;
 
 static u32 pmbase;
 
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
index f4c290b8482f..ad0083abfa23 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
@@ -34,7 +34,7 @@ static int relaxed_check;
  *                   GET PROCESSOR CORE SPEED IN KHZ                 *
  *********************************************************************/
 
-static unsigned int pentium3_get_frequency(unsigned int processor)
+static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
 {
 	/* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
 	struct {
@@ -227,7 +227,7 @@ static unsigned int pentium4_get_frequency(void)
 
 
 /* Warning: may get called from smp_call_function_single. */
-unsigned int speedstep_get_frequency(unsigned int processor)
+unsigned int speedstep_get_frequency(enum speedstep_processor processor)
 {
 	switch (processor) {
 	case SPEEDSTEP_CPU_PCORE:
@@ -380,7 +380,7 @@ EXPORT_SYMBOL_GPL(speedstep_detect_processor);
  *                     DETECT SPEEDSTEP SPEEDS                       *
  *********************************************************************/
 
-unsigned int speedstep_get_freqs(unsigned int processor,
+unsigned int speedstep_get_freqs(enum speedstep_processor processor,
 				  unsigned int *low_speed,
 				  unsigned int *high_speed,
 				  unsigned int *transition_latency,
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
index 2b6c04e5a304..70d9cea1219d 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
@@ -11,18 +11,18 @@
 
 
 /* processors */
-
-#define SPEEDSTEP_CPU_PIII_C_EARLY	0x00000001  /* Coppermine core */
-#define SPEEDSTEP_CPU_PIII_C		0x00000002  /* Coppermine core */
-#define SPEEDSTEP_CPU_PIII_T		0x00000003  /* Tualatin core */
-#define SPEEDSTEP_CPU_P4M		0x00000004  /* P4-M  */
-
+enum speedstep_processor {
+	SPEEDSTEP_CPU_PIII_C_EARLY = 0x00000001,  /* Coppermine core */
+	SPEEDSTEP_CPU_PIII_C	   = 0x00000002,  /* Coppermine core */
+	SPEEDSTEP_CPU_PIII_T	   = 0x00000003,  /* Tualatin core */
+	SPEEDSTEP_CPU_P4M	   = 0x00000004,  /* P4-M  */
 /* the following processors are not speedstep-capable and are not auto-detected
  * in speedstep_detect_processor(). However, their speed can be detected using
  * the speedstep_get_frequency() call. */
-#define SPEEDSTEP_CPU_PM		0xFFFFFF03  /* Pentium M  */
-#define SPEEDSTEP_CPU_P4D		0xFFFFFF04  /* desktop P4  */
-#define SPEEDSTEP_CPU_PCORE		0xFFFFFF05  /* Core */
+	SPEEDSTEP_CPU_PM	   = 0xFFFFFF03,  /* Pentium M  */
+	SPEEDSTEP_CPU_P4D	   = 0xFFFFFF04,  /* desktop P4  */
+	SPEEDSTEP_CPU_PCORE	   = 0xFFFFFF05,  /* Core */
+};
 
 /* speedstep states -- only two of them */
 
@@ -31,10 +31,10 @@
 
 
 /* detect a speedstep-capable processor */
-extern unsigned int speedstep_detect_processor (void);
+extern enum speedstep_processor speedstep_detect_processor(void);
 
 /* detect the current speed (in khz) of the processor */
-extern unsigned int speedstep_get_frequency(unsigned int processor);
+extern unsigned int speedstep_get_frequency(enum speedstep_processor processor);
 
 
 /* detect the low and high speeds of the processor. The callback
@@ -42,7 +42,7 @@ extern unsigned int speedstep_get_frequency(unsigned int processor);
  * SPEEDSTEP_LOW; the second argument is zero so that no
  * cpufreq_notify_transition calls are initiated.
  */
-extern unsigned int speedstep_get_freqs(unsigned int processor,
+extern unsigned int speedstep_get_freqs(enum speedstep_processor processor,
 	unsigned int *low_speed,
 	unsigned int *high_speed,
 	unsigned int *transition_latency,
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
index befea088e4f5..04d73c114e49 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
@@ -35,7 +35,7 @@ static int smi_cmd;
 static unsigned int smi_sig;
 
 /* info about the processor */
-static unsigned int speedstep_processor;
+static enum speedstep_processor speedstep_processor;
 
 /*
  * There are only two frequency states for each processor. Values
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 19807b89f058..4fbd384fb645 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -373,7 +373,7 @@ static void __cpuinit init_nsc(struct cpuinfo_x86 *c)
 	/* Handle the GX (Formally known as the GX2) */
 
 	if (c->x86 == 5 && c->x86_model == 5)
-		display_cacheinfo(c);
+		cpu_detect_cache_sizes(c);
 	else
 		init_cyrix(c);
 }
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 40e1835b35e8..c900b73f9224 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -263,8 +263,12 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 	/* Don't do the funky fallback heuristics the AMD version employs
 	   for now. */
 	node = apicid_to_node[apicid];
-	if (node == NUMA_NO_NODE || !node_online(node))
+	if (node == NUMA_NO_NODE)
 		node = first_node(node_online_map);
+	else if (!node_online(node)) {
+		/* reuse the value from init_cpu_to_node() */
+		node = cpu_to_node(cpu);
+	}
 	numa_set_node(cpu, node);
 
 	printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node);
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 804c40e2bc3e..6c40f6b5b340 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -94,7 +94,7 @@ static const struct _cache_table __cpuinitconst cache_table[] =
 	{ 0xd1, LVL_3,    1024 },	/* 4-way set assoc, 64 byte line size */
 	{ 0xd2, LVL_3,    2048 },	/* 4-way set assoc, 64 byte line size */
 	{ 0xd6, LVL_3,    1024 },	/* 8-way set assoc, 64 byte line size */
-	{ 0xd7, LVL_3,    2038 },	/* 8-way set assoc, 64 byte line size */
+	{ 0xd7, LVL_3,    2048 },	/* 8-way set assoc, 64 byte line size */
 	{ 0xd8, LVL_3,    4096 },	/* 12-way set assoc, 64 byte line size */
 	{ 0xdc, LVL_3,    2048 },	/* 12-way set assoc, 64 byte line size */
 	{ 0xdd, LVL_3,    4096 },	/* 12-way set assoc, 64 byte line size */
@@ -102,6 +102,9 @@ static const struct _cache_table __cpuinitconst cache_table[] =
 	{ 0xe2, LVL_3,    2048 },	/* 16-way set assoc, 64 byte line size */
 	{ 0xe3, LVL_3,    4096 },	/* 16-way set assoc, 64 byte line size */
 	{ 0xe4, LVL_3,    8192 },	/* 16-way set assoc, 64 byte line size */
+	{ 0xea, LVL_3,    12288 },	/* 24-way set assoc, 64 byte line size */
+	{ 0xeb, LVL_3,    18432 },	/* 24-way set assoc, 64 byte line size */
+	{ 0xec, LVL_3,    24576 },	/* 24-way set assoc, 64 byte line size */
 	{ 0x00, 0, 0}
 };
 
@@ -488,22 +491,6 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 #endif
 	}
 
-	if (trace)
-		printk(KERN_INFO "CPU: Trace cache: %dK uops", trace);
-	else if (l1i)
-		printk(KERN_INFO "CPU: L1 I cache: %dK", l1i);
-
-	if (l1d)
-		printk(KERN_CONT ", L1 D cache: %dK\n", l1d);
-	else
-		printk(KERN_CONT "\n");
-
-	if (l2)
-		printk(KERN_INFO "CPU: L2 cache: %dK\n", l2);
-
-	if (l3)
-		printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
-
 	c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d));
 
 	return l2;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 721a77ca8115..a8aacd4b513c 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -46,6 +46,9 @@
 
 #include "mce-internal.h"
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/mce.h>
+
 int mce_disabled __read_mostly;
 
 #define MISC_MCELOG_MINOR	227
@@ -85,18 +88,26 @@ static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
 static DEFINE_PER_CPU(struct mce, mces_seen);
 static int			cpu_missing;
 
-static void default_decode_mce(struct mce *m)
+/*
+ * CPU/chipset specific EDAC code can register a notifier call here to print
+ * MCE errors in a human-readable form.
+ */
+ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain);
+EXPORT_SYMBOL_GPL(x86_mce_decoder_chain);
+
+static int default_decode_mce(struct notifier_block *nb, unsigned long val,
+			       void *data)
 {
 	pr_emerg("No human readable MCE decoding support on this CPU type.\n");
 	pr_emerg("Run the message through 'mcelog --ascii' to decode.\n");
+
+	return NOTIFY_STOP;
 }
 
-/*
- * CPU/chipset specific EDAC code can register a callback here to print
- * MCE errors in a human-readable form:
- */
-void (*x86_mce_decode_callback)(struct mce *m) = default_decode_mce;
-EXPORT_SYMBOL(x86_mce_decode_callback);
+static struct notifier_block mce_dec_nb = {
+	.notifier_call = default_decode_mce,
+	.priority      = -1,
+};
 
 /* MCA banks polled by the period polling timer for corrected events */
 DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
@@ -141,6 +152,9 @@ void mce_log(struct mce *mce)
 {
 	unsigned next, entry;
 
+	/* Emit the trace record: */
+	trace_mce_record(mce);
+
 	mce->finished = 0;
 	wmb();
 	for (;;) {
@@ -204,9 +218,9 @@ static void print_mce(struct mce *m)
 
 	/*
 	 * Print out human-readable details about the MCE error,
-	 * (if the CPU has an implementation for that):
+	 * (if the CPU has an implementation for that)
 	 */
-	x86_mce_decode_callback(m);
+	atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m);
 }
 
 static void print_mce_head(void)
@@ -1122,7 +1136,7 @@ static int check_interval = 5 * 60; /* 5 minutes */
 static DEFINE_PER_CPU(int, mce_next_interval); /* in jiffies */
 static DEFINE_PER_CPU(struct timer_list, mce_timer);
 
-static void mcheck_timer(unsigned long data)
+static void mce_start_timer(unsigned long data)
 {
 	struct timer_list *t = &per_cpu(mce_timer, data);
 	int *n;
@@ -1187,7 +1201,7 @@ int mce_notify_irq(void)
 }
 EXPORT_SYMBOL_GPL(mce_notify_irq);
 
-static int mce_banks_init(void)
+static int __cpuinit __mcheck_cpu_mce_banks_init(void)
 {
 	int i;
 
@@ -1206,7 +1220,7 @@ static int mce_banks_init(void)
 /*
  * Initialize Machine Checks for a CPU.
  */
-static int __cpuinit mce_cap_init(void)
+static int __cpuinit __mcheck_cpu_cap_init(void)
 {
 	unsigned b;
 	u64 cap;
@@ -1228,7 +1242,7 @@ static int __cpuinit mce_cap_init(void)
 	WARN_ON(banks != 0 && b != banks);
 	banks = b;
 	if (!mce_banks) {
-		int err = mce_banks_init();
+		int err = __mcheck_cpu_mce_banks_init();
 
 		if (err)
 			return err;
@@ -1244,7 +1258,7 @@ static int __cpuinit mce_cap_init(void)
 	return 0;
 }
 
-static void mce_init(void)
+static void __mcheck_cpu_init_generic(void)
 {
 	mce_banks_t all_banks;
 	u64 cap;
@@ -1273,7 +1287,7 @@ static void mce_init(void)
 }
 
 /* Add per CPU specific workarounds here */
-static int __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c)
+static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 {
 	if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
 		pr_info("MCE: unknown CPU type - not enabling MCE support.\n");
@@ -1341,7 +1355,7 @@ static int __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c)
 	return 0;
 }
 
-static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c)
+static void __cpuinit __mcheck_cpu_ancient_init(struct cpuinfo_x86 *c)
 {
 	if (c->x86 != 5)
 		return;
@@ -1355,7 +1369,7 @@ static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c)
 	}
 }
 
-static void mce_cpu_features(struct cpuinfo_x86 *c)
+static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
 {
 	switch (c->x86_vendor) {
 	case X86_VENDOR_INTEL:
@@ -1369,18 +1383,19 @@ static void mce_cpu_features(struct cpuinfo_x86 *c)
 	}
 }
 
-static void mce_init_timer(void)
+static void __mcheck_cpu_init_timer(void)
 {
 	struct timer_list *t = &__get_cpu_var(mce_timer);
 	int *n = &__get_cpu_var(mce_next_interval);
 
+	setup_timer(t, mce_start_timer, smp_processor_id());
+
 	if (mce_ignore_ce)
 		return;
 
 	*n = check_interval * HZ;
 	if (!*n)
 		return;
-	setup_timer(t, mcheck_timer, smp_processor_id());
 	t->expires = round_jiffies(jiffies + *n);
 	add_timer_on(t, smp_processor_id());
 }
@@ -1400,27 +1415,28 @@ void (*machine_check_vector)(struct pt_regs *, long error_code) =
  * Called for each booted CPU to set up machine checks.
  * Must be called with preempt off:
  */
-void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
+void __cpuinit mcheck_cpu_init(struct cpuinfo_x86 *c)
 {
 	if (mce_disabled)
 		return;
 
-	mce_ancient_init(c);
+	__mcheck_cpu_ancient_init(c);
 
 	if (!mce_available(c))
 		return;
 
-	if (mce_cap_init() < 0 || mce_cpu_quirks(c) < 0) {
+	if (__mcheck_cpu_cap_init() < 0 || __mcheck_cpu_apply_quirks(c) < 0) {
 		mce_disabled = 1;
 		return;
 	}
 
 	machine_check_vector = do_machine_check;
 
-	mce_init();
-	mce_cpu_features(c);
-	mce_init_timer();
+	__mcheck_cpu_init_generic();
+	__mcheck_cpu_init_vendor(c);
+	__mcheck_cpu_init_timer();
 	INIT_WORK(&__get_cpu_var(mce_work), mce_process_work);
+
 }
 
 /*
@@ -1640,6 +1656,15 @@ static int __init mcheck_enable(char *str)
 }
 __setup("mce", mcheck_enable);
 
+int __init mcheck_init(void)
+{
+	atomic_notifier_chain_register(&x86_mce_decoder_chain, &mce_dec_nb);
+
+	mcheck_intel_therm_init();
+
+	return 0;
+}
+
 /*
  * Sysfs support
  */
@@ -1648,7 +1673,7 @@ __setup("mce", mcheck_enable);
  * Disable machine checks on suspend and shutdown. We can't really handle
  * them later.
  */
-static int mce_disable(void)
+static int mce_disable_error_reporting(void)
 {
 	int i;
 
@@ -1663,12 +1688,12 @@ static int mce_disable(void)
 
 static int mce_suspend(struct sys_device *dev, pm_message_t state)
 {
-	return mce_disable();
+	return mce_disable_error_reporting();
 }
 
 static int mce_shutdown(struct sys_device *dev)
 {
-	return mce_disable();
+	return mce_disable_error_reporting();
 }
 
 /*
@@ -1678,8 +1703,8 @@ static int mce_shutdown(struct sys_device *dev)
  */
 static int mce_resume(struct sys_device *dev)
 {
-	mce_init();
-	mce_cpu_features(&current_cpu_data);
+	__mcheck_cpu_init_generic();
+	__mcheck_cpu_init_vendor(&current_cpu_data);
 
 	return 0;
 }
@@ -1689,8 +1714,8 @@ static void mce_cpu_restart(void *data)
 	del_timer_sync(&__get_cpu_var(mce_timer));
 	if (!mce_available(&current_cpu_data))
 		return;
-	mce_init();
-	mce_init_timer();
+	__mcheck_cpu_init_generic();
+	__mcheck_cpu_init_timer();
 }
 
 /* Reinit MCEs after user configuration changes */
@@ -1716,7 +1741,7 @@ static void mce_enable_ce(void *all)
 	cmci_reenable();
 	cmci_recheck();
 	if (all)
-		mce_init_timer();
+		__mcheck_cpu_init_timer();
 }
 
 static struct sysdev_class mce_sysclass = {
@@ -1904,7 +1929,7 @@ error2:
 		sysdev_remove_file(&per_cpu(mce_dev, cpu), &mce_banks[j].attr);
 error:
 	while (--i >= 0)
-		sysdev_remove_file(&per_cpu(mce_dev, cpu), &mce_banks[i].attr);
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
 
 	sysdev_unregister(&per_cpu(mce_dev, cpu));
 
@@ -1929,13 +1954,14 @@ static __cpuinit void mce_remove_device(unsigned int cpu)
 }
 
 /* Make sure there are no machine checks on offlined CPUs. */
-static void mce_disable_cpu(void *h)
+static void __cpuinit mce_disable_cpu(void *h)
 {
 	unsigned long action = *(unsigned long *)h;
 	int i;
 
 	if (!mce_available(&current_cpu_data))
 		return;
+
 	if (!(action & CPU_TASKS_FROZEN))
 		cmci_clear();
 	for (i = 0; i < banks; i++) {
@@ -1946,7 +1972,7 @@ static void mce_disable_cpu(void *h)
 	}
 }
 
-static void mce_reenable_cpu(void *h)
+static void __cpuinit mce_reenable_cpu(void *h)
 {
 	unsigned long action = *(unsigned long *)h;
 	int i;
@@ -1991,9 +2017,11 @@ mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 		break;
 	case CPU_DOWN_FAILED:
 	case CPU_DOWN_FAILED_FROZEN:
-		t->expires = round_jiffies(jiffies +
+		if (!mce_ignore_ce && check_interval) {
+			t->expires = round_jiffies(jiffies +
 					   __get_cpu_var(mce_next_interval));
-		add_timer_on(t, cpu);
+			add_timer_on(t, cpu);
+		}
 		smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
 		break;
 	case CPU_POST_DEAD:
@@ -2025,7 +2053,7 @@ static __init void mce_init_banks(void)
 	}
 }
 
-static __init int mce_init_device(void)
+static __init int mcheck_init_device(void)
 {
 	int err;
 	int i = 0;
@@ -2053,7 +2081,7 @@ static __init int mce_init_device(void)
 	return err;
 }
 
-device_initcall(mce_init_device);
+device_initcall(mcheck_init_device);
 
 /*
  * Old style boot options parsing. Only for compatibility.
@@ -2101,7 +2129,7 @@ static int fake_panic_set(void *data, u64 val)
 DEFINE_SIMPLE_ATTRIBUTE(fake_panic_fops, fake_panic_get,
 			fake_panic_set, "%llu\n");
 
-static int __init mce_debugfs_init(void)
+static int __init mcheck_debugfs_init(void)
 {
 	struct dentry *dmce, *ffake_panic;
 
@@ -2115,5 +2143,5 @@ static int __init mce_debugfs_init(void)
 
 	return 0;
 }
-late_initcall(mce_debugfs_init);
+late_initcall(mcheck_debugfs_init);
 #endif
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index b3a1dba75330..4fef985fc221 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -49,6 +49,8 @@ static DEFINE_PER_CPU(struct thermal_state, thermal_state);
 
 static atomic_t therm_throt_en	= ATOMIC_INIT(0);
 
+static u32 lvtthmr_init __read_mostly;
+
 #ifdef CONFIG_SYSFS
 #define define_therm_throt_sysdev_one_ro(_name)				\
 	static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
@@ -254,6 +256,18 @@ asmlinkage void smp_thermal_interrupt(struct pt_regs *regs)
 	ack_APIC_irq();
 }
 
+void __init mcheck_intel_therm_init(void)
+{
+	/*
+	 * This function is only called on boot CPU. Save the init thermal
+	 * LVT value on BSP and use that value to restore APs' thermal LVT
+	 * entry BIOS programmed later
+	 */
+	if (cpu_has(&boot_cpu_data, X86_FEATURE_ACPI) &&
+		cpu_has(&boot_cpu_data, X86_FEATURE_ACC))
+		lvtthmr_init = apic_read(APIC_LVTTHMR);
+}
+
 void intel_init_thermal(struct cpuinfo_x86 *c)
 {
 	unsigned int cpu = smp_processor_id();
@@ -270,7 +284,20 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
 	 * since it might be delivered via SMI already:
 	 */
 	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	h = apic_read(APIC_LVTTHMR);
+
+	/*
+	 * The initial value of thermal LVT entries on all APs always reads
+	 * 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI
+	 * sequence to them and LVT registers are reset to 0s except for
+	 * the mask bits which are set to 1s when APs receive INIT IPI.
+	 * Always restore the value that BIOS has programmed on AP based on
+	 * BSP's info we saved since BIOS is always setting the same value
+	 * for all threads/cores
+	 */
+	apic_write(APIC_LVTTHMR, lvtthmr_init);
+
+	h = lvtthmr_init;
+
 	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
 		printk(KERN_DEBUG
 		       "CPU%d: Thermal monitoring handled by SMI\n", cpu);
diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index 73c86db5acbe..09b1698e0466 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -170,6 +170,41 @@ static int __init cmp_range(const void *x1, const void *x2)
 	return start1 - start2;
 }
 
+static int __init clean_sort_range(struct res_range *range, int az)
+{
+	int i, j, k = az - 1, nr_range = 0;
+
+	for (i = 0; i < k; i++) {
+		if (range[i].end)
+			continue;
+		for (j = k; j > i; j--) {
+			if (range[j].end) {
+				k = j;
+				break;
+			}
+		}
+		if (j == i)
+			break;
+		range[i].start = range[k].start;
+		range[i].end   = range[k].end;
+		range[k].start = 0;
+		range[k].end   = 0;
+		k--;
+	}
+	/* count it */
+	for (i = 0; i < az; i++) {
+		if (!range[i].end) {
+			nr_range = i;
+			break;
+		}
+	}
+
+	/* sort them */
+	sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
+
+	return nr_range;
+}
+
 #define BIOS_BUG_MSG KERN_WARNING \
 	"WARNING: BIOS bug: VAR MTRR %d contains strange UC entry under 1M, check with your system vendor!\n"
 
@@ -223,22 +258,18 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
 		subtract_range(range, extra_remove_base,
 				 extra_remove_base + extra_remove_size  - 1);
 
-	/* get new range num */
-	nr_range = 0;
-	for (i = 0; i < RANGE_NUM; i++) {
-		if (!range[i].end)
-			continue;
-		nr_range++;
-	}
 	if  (debug_print) {
 		printk(KERN_DEBUG "After UC checking\n");
-		for (i = 0; i < nr_range; i++)
+		for (i = 0; i < RANGE_NUM; i++) {
+			if (!range[i].end)
+				continue;
 			printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
 				 range[i].start, range[i].end + 1);
+		}
 	}
 
 	/* sort the ranges */
-	sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
+	nr_range = clean_sort_range(range, RANGE_NUM);
 	if  (debug_print) {
 		printk(KERN_DEBUG "After sorting\n");
 		for (i = 0; i < nr_range; i++)
@@ -689,8 +720,6 @@ static int __init mtrr_need_cleanup(void)
 			continue;
 		if (!size)
 			type = MTRR_NUM_TYPES;
-		if (type == MTRR_TYPE_WRPROT)
-			type = MTRR_TYPE_UNCACHABLE;
 		num[type]++;
 	}
 
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index b5801c311846..45506d5dd8df 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -77,6 +77,18 @@ struct cpu_hw_events {
 	struct debug_store	*ds;
 };
 
+struct event_constraint {
+	unsigned long	idxmsk[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+	int		code;
+};
+
+#define EVENT_CONSTRAINT(c, m) { .code = (c), .idxmsk[0] = (m) }
+#define EVENT_CONSTRAINT_END  { .code = 0, .idxmsk[0] = 0 }
+
+#define for_each_event_constraint(e, c) \
+	for ((e) = (c); (e)->idxmsk[0]; (e)++)
+
+
 /*
  * struct x86_pmu - generic x86 pmu
  */
@@ -102,6 +114,8 @@ struct x86_pmu {
 	u64		intel_ctrl;
 	void		(*enable_bts)(u64 config);
 	void		(*disable_bts)(void);
+	int		(*get_event_idx)(struct cpu_hw_events *cpuc,
+					 struct hw_perf_event *hwc);
 };
 
 static struct x86_pmu x86_pmu __read_mostly;
@@ -110,6 +124,8 @@ static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
 	.enabled = 1,
 };
 
+static const struct event_constraint *event_constraints;
+
 /*
  * Not sure about some of these
  */
@@ -155,6 +171,16 @@ static u64 p6_pmu_raw_event(u64 hw_event)
 	return hw_event & P6_EVNTSEL_MASK;
 }
 
+static const struct event_constraint intel_p6_event_constraints[] =
+{
+	EVENT_CONSTRAINT(0xc1, 0x1),	/* FLOPS */
+	EVENT_CONSTRAINT(0x10, 0x1),	/* FP_COMP_OPS_EXE */
+	EVENT_CONSTRAINT(0x11, 0x1),	/* FP_ASSIST */
+	EVENT_CONSTRAINT(0x12, 0x2),	/* MUL */
+	EVENT_CONSTRAINT(0x13, 0x2),	/* DIV */
+	EVENT_CONSTRAINT(0x14, 0x1),	/* CYCLES_DIV_BUSY */
+	EVENT_CONSTRAINT_END
+};
 
 /*
  * Intel PerfMon v3. Used on Core2 and later.
@@ -170,6 +196,35 @@ static const u64 intel_perfmon_event_map[] =
   [PERF_COUNT_HW_BUS_CYCLES]		= 0x013c,
 };
 
+static const struct event_constraint intel_core_event_constraints[] =
+{
+	EVENT_CONSTRAINT(0x10, 0x1),	/* FP_COMP_OPS_EXE */
+	EVENT_CONSTRAINT(0x11, 0x2),	/* FP_ASSIST */
+	EVENT_CONSTRAINT(0x12, 0x2),	/* MUL */
+	EVENT_CONSTRAINT(0x13, 0x2),	/* DIV */
+	EVENT_CONSTRAINT(0x14, 0x1),	/* CYCLES_DIV_BUSY */
+	EVENT_CONSTRAINT(0x18, 0x1),	/* IDLE_DURING_DIV */
+	EVENT_CONSTRAINT(0x19, 0x2),	/* DELAYED_BYPASS */
+	EVENT_CONSTRAINT(0xa1, 0x1),	/* RS_UOPS_DISPATCH_CYCLES */
+	EVENT_CONSTRAINT(0xcb, 0x1),	/* MEM_LOAD_RETIRED */
+	EVENT_CONSTRAINT_END
+};
+
+static const struct event_constraint intel_nehalem_event_constraints[] =
+{
+	EVENT_CONSTRAINT(0x40, 0x3),	/* L1D_CACHE_LD */
+	EVENT_CONSTRAINT(0x41, 0x3),	/* L1D_CACHE_ST */
+	EVENT_CONSTRAINT(0x42, 0x3),	/* L1D_CACHE_LOCK */
+	EVENT_CONSTRAINT(0x43, 0x3),	/* L1D_ALL_REF */
+	EVENT_CONSTRAINT(0x4e, 0x3),	/* L1D_PREFETCH */
+	EVENT_CONSTRAINT(0x4c, 0x3),	/* LOAD_HIT_PRE */
+	EVENT_CONSTRAINT(0x51, 0x3),	/* L1D */
+	EVENT_CONSTRAINT(0x52, 0x3),	/* L1D_CACHE_PREFETCH_LOCK_FB_HIT */
+	EVENT_CONSTRAINT(0x53, 0x3),	/* L1D_CACHE_LOCK_FB_HIT */
+	EVENT_CONSTRAINT(0xc5, 0x3),	/* CACHE_LOCK_CYCLES */
+	EVENT_CONSTRAINT_END
+};
+
 static u64 intel_pmu_event_map(int hw_event)
 {
 	return intel_perfmon_event_map[hw_event];
@@ -190,7 +245,7 @@ static u64 __read_mostly hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_OP_MAX]
 				[PERF_COUNT_HW_CACHE_RESULT_MAX];
 
-static const u64 nehalem_hw_cache_event_ids
+static __initconst u64 nehalem_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
 				[PERF_COUNT_HW_CACHE_OP_MAX]
 				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
@@ -281,7 +336,7 @@ static const u64 nehalem_hw_cache_event_ids
  },
 };
 
-static const u64 core2_hw_cache_event_ids
+static __initconst u64 core2_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
 				[PERF_COUNT_HW_CACHE_OP_MAX]
 				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
@@ -372,7 +427,7 @@ static const u64 core2_hw_cache_event_ids
  },
 };
 
-static const u64 atom_hw_cache_event_ids
+static __initconst u64 atom_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
 				[PERF_COUNT_HW_CACHE_OP_MAX]
 				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
@@ -469,7 +524,7 @@ static u64 intel_pmu_raw_event(u64 hw_event)
 #define CORE_EVNTSEL_UNIT_MASK		0x0000FF00ULL
 #define CORE_EVNTSEL_EDGE_MASK		0x00040000ULL
 #define CORE_EVNTSEL_INV_MASK		0x00800000ULL
-#define CORE_EVNTSEL_REG_MASK	0xFF000000ULL
+#define CORE_EVNTSEL_REG_MASK		0xFF000000ULL
 
 #define CORE_EVNTSEL_MASK		\
 	(CORE_EVNTSEL_EVENT_MASK |	\
@@ -481,7 +536,7 @@ static u64 intel_pmu_raw_event(u64 hw_event)
 	return hw_event & CORE_EVNTSEL_MASK;
 }
 
-static const u64 amd_hw_cache_event_ids
+static __initconst u64 amd_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
 				[PERF_COUNT_HW_CACHE_OP_MAX]
 				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
@@ -932,6 +987,8 @@ static int __hw_perf_event_init(struct perf_event *event)
 	 */
 	hwc->config = ARCH_PERFMON_EVENTSEL_INT;
 
+	hwc->idx = -1;
+
 	/*
 	 * Count user and OS events unless requested not to.
 	 */
@@ -1229,7 +1286,7 @@ x86_perf_event_set_period(struct perf_event *event,
 		return 0;
 
 	/*
-	 * If we are way outside a reasoable range then just skip forward:
+	 * If we are way outside a reasonable range then just skip forward:
 	 */
 	if (unlikely(left <= -period)) {
 		left = period;
@@ -1334,8 +1391,7 @@ static void amd_pmu_enable_event(struct hw_perf_event *hwc, int idx)
 		x86_pmu_enable_event(hwc, idx);
 }
 
-static int
-fixed_mode_idx(struct perf_event *event, struct hw_perf_event *hwc)
+static int fixed_mode_idx(struct hw_perf_event *hwc)
 {
 	unsigned int hw_event;
 
@@ -1349,6 +1405,12 @@ fixed_mode_idx(struct perf_event *event, struct hw_perf_event *hwc)
 	if (!x86_pmu.num_events_fixed)
 		return -1;
 
+	/*
+	 * fixed counters do not take all possible filters
+	 */
+	if (hwc->config & ARCH_PERFMON_EVENT_FILTER_MASK)
+		return -1;
+
 	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
 		return X86_PMC_IDX_FIXED_INSTRUCTIONS;
 	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_CPU_CYCLES)))
@@ -1360,22 +1422,57 @@ fixed_mode_idx(struct perf_event *event, struct hw_perf_event *hwc)
 }
 
 /*
- * Find a PMC slot for the freshly enabled / scheduled in event:
+ * generic counter allocator: get next free counter
  */
-static int x86_pmu_enable(struct perf_event *event)
+static int
+gen_get_event_idx(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc)
+{
+	int idx;
+
+	idx = find_first_zero_bit(cpuc->used_mask, x86_pmu.num_events);
+	return idx == x86_pmu.num_events ? -1 : idx;
+}
+
+/*
+ * intel-specific counter allocator: check event constraints
+ */
+static int
+intel_get_event_idx(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc)
+{
+	const struct event_constraint *event_constraint;
+	int i, code;
+
+	if (!event_constraints)
+		goto skip;
+
+	code = hwc->config & CORE_EVNTSEL_EVENT_MASK;
+
+	for_each_event_constraint(event_constraint, event_constraints) {
+		if (code == event_constraint->code) {
+			for_each_bit(i, event_constraint->idxmsk, X86_PMC_IDX_MAX) {
+				if (!test_and_set_bit(i, cpuc->used_mask))
+					return i;
+			}
+			return -1;
+		}
+	}
+skip:
+	return gen_get_event_idx(cpuc, hwc);
+}
+
+static int
+x86_schedule_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
 	int idx;
 
-	idx = fixed_mode_idx(event, hwc);
+	idx = fixed_mode_idx(hwc);
 	if (idx == X86_PMC_IDX_FIXED_BTS) {
 		/* BTS is already occupied. */
 		if (test_and_set_bit(idx, cpuc->used_mask))
 			return -EAGAIN;
 
 		hwc->config_base	= 0;
-		hwc->event_base	= 0;
+		hwc->event_base		= 0;
 		hwc->idx		= idx;
 	} else if (idx >= 0) {
 		/*
@@ -1396,20 +1493,35 @@ static int x86_pmu_enable(struct perf_event *event)
 	} else {
 		idx = hwc->idx;
 		/* Try to get the previous generic event again */
-		if (test_and_set_bit(idx, cpuc->used_mask)) {
+		if (idx == -1 || test_and_set_bit(idx, cpuc->used_mask)) {
 try_generic:
-			idx = find_first_zero_bit(cpuc->used_mask,
-						  x86_pmu.num_events);
-			if (idx == x86_pmu.num_events)
+			idx = x86_pmu.get_event_idx(cpuc, hwc);
+			if (idx == -1)
 				return -EAGAIN;
 
 			set_bit(idx, cpuc->used_mask);
 			hwc->idx = idx;
 		}
-		hwc->config_base  = x86_pmu.eventsel;
-		hwc->event_base = x86_pmu.perfctr;
+		hwc->config_base = x86_pmu.eventsel;
+		hwc->event_base  = x86_pmu.perfctr;
 	}
 
+	return idx;
+}
+
+/*
+ * Find a PMC slot for the freshly enabled / scheduled in event:
+ */
+static int x86_pmu_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx;
+
+	idx = x86_schedule_event(cpuc, hwc);
+	if (idx < 0)
+		return idx;
+
 	perf_events_lapic_init();
 
 	x86_pmu.disable(hwc, idx);
@@ -1520,6 +1632,7 @@ static void intel_pmu_drain_bts_buffer(struct cpu_hw_events *cpuc)
 
 	data.period	= event->hw.last_period;
 	data.addr	= 0;
+	data.raw	= NULL;
 	regs.ip		= 0;
 
 	/*
@@ -1637,6 +1750,7 @@ static int p6_pmu_handle_irq(struct pt_regs *regs)
 	u64 val;
 
 	data.addr = 0;
+	data.raw = NULL;
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
@@ -1682,6 +1796,7 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 	u64 ack, status;
 
 	data.addr = 0;
+	data.raw = NULL;
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
@@ -1745,6 +1860,7 @@ static int amd_pmu_handle_irq(struct pt_regs *regs)
 	u64 val;
 
 	data.addr = 0;
+	data.raw = NULL;
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
@@ -1852,7 +1968,7 @@ static __read_mostly struct notifier_block perf_event_nmi_notifier = {
 	.priority		= 1
 };
 
-static struct x86_pmu p6_pmu = {
+static __initconst struct x86_pmu p6_pmu = {
 	.name			= "p6",
 	.handle_irq		= p6_pmu_handle_irq,
 	.disable_all		= p6_pmu_disable_all,
@@ -1877,9 +1993,10 @@ static struct x86_pmu p6_pmu = {
 	 */
 	.event_bits		= 32,
 	.event_mask		= (1ULL << 32) - 1,
+	.get_event_idx		= intel_get_event_idx,
 };
 
-static struct x86_pmu intel_pmu = {
+static __initconst struct x86_pmu intel_pmu = {
 	.name			= "Intel",
 	.handle_irq		= intel_pmu_handle_irq,
 	.disable_all		= intel_pmu_disable_all,
@@ -1900,9 +2017,10 @@ static struct x86_pmu intel_pmu = {
 	.max_period		= (1ULL << 31) - 1,
 	.enable_bts		= intel_pmu_enable_bts,
 	.disable_bts		= intel_pmu_disable_bts,
+	.get_event_idx		= intel_get_event_idx,
 };
 
-static struct x86_pmu amd_pmu = {
+static __initconst struct x86_pmu amd_pmu = {
 	.name			= "AMD",
 	.handle_irq		= amd_pmu_handle_irq,
 	.disable_all		= amd_pmu_disable_all,
@@ -1920,9 +2038,10 @@ static struct x86_pmu amd_pmu = {
 	.apic			= 1,
 	/* use highest bit to detect overflow */
 	.max_period		= (1ULL << 47) - 1,
+	.get_event_idx		= gen_get_event_idx,
 };
 
-static int p6_pmu_init(void)
+static __init int p6_pmu_init(void)
 {
 	switch (boot_cpu_data.x86_model) {
 	case 1:
@@ -1932,10 +2051,12 @@ static int p6_pmu_init(void)
 	case 7:
 	case 8:
 	case 11: /* Pentium III */
+		event_constraints = intel_p6_event_constraints;
 		break;
 	case 9:
 	case 13:
 		/* Pentium M */
+		event_constraints = intel_p6_event_constraints;
 		break;
 	default:
 		pr_cont("unsupported p6 CPU model %d ",
@@ -1945,16 +2066,10 @@ static int p6_pmu_init(void)
 
 	x86_pmu = p6_pmu;
 
-	if (!cpu_has_apic) {
-		pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n");
-		pr_info("no hardware sampling interrupt available.\n");
-		x86_pmu.apic = 0;
-	}
-
 	return 0;
 }
 
-static int intel_pmu_init(void)
+static __init int intel_pmu_init(void)
 {
 	union cpuid10_edx edx;
 	union cpuid10_eax eax;
@@ -2007,12 +2122,14 @@ static int intel_pmu_init(void)
 		       sizeof(hw_cache_event_ids));
 
 		pr_cont("Core2 events, ");
+		event_constraints = intel_core_event_constraints;
 		break;
 	default:
 	case 26:
 		memcpy(hw_cache_event_ids, nehalem_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 
+		event_constraints = intel_nehalem_event_constraints;
 		pr_cont("Nehalem/Corei7 events, ");
 		break;
 	case 28:
@@ -2025,7 +2142,7 @@ static int intel_pmu_init(void)
 	return 0;
 }
 
-static int amd_pmu_init(void)
+static __init int amd_pmu_init(void)
 {
 	/* Performance-monitoring supported from K7 and later: */
 	if (boot_cpu_data.x86 < 6)
@@ -2040,6 +2157,16 @@ static int amd_pmu_init(void)
 	return 0;
 }
 
+static void __init pmu_check_apic(void)
+{
+	if (cpu_has_apic)
+		return;
+
+	x86_pmu.apic = 0;
+	pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n");
+	pr_info("no hardware sampling interrupt available.\n");
+}
+
 void __init init_hw_perf_events(void)
 {
 	int err;
@@ -2061,6 +2188,8 @@ void __init init_hw_perf_events(void)
 		return;
 	}
 
+	pmu_check_apic();
+
 	pr_cont("%s PMU driver.\n", x86_pmu.name);
 
 	if (x86_pmu.num_events > X86_PMC_MAX_GENERIC) {
@@ -2105,11 +2234,47 @@ static const struct pmu pmu = {
 	.unthrottle	= x86_pmu_unthrottle,
 };
 
+static int
+validate_event(struct cpu_hw_events *cpuc, struct perf_event *event)
+{
+	struct hw_perf_event fake_event = event->hw;
+
+	if (event->pmu && event->pmu != &pmu)
+		return 0;
+
+	return x86_schedule_event(cpuc, &fake_event) >= 0;
+}
+
+static int validate_group(struct perf_event *event)
+{
+	struct perf_event *sibling, *leader = event->group_leader;
+	struct cpu_hw_events fake_pmu;
+
+	memset(&fake_pmu, 0, sizeof(fake_pmu));
+
+	if (!validate_event(&fake_pmu, leader))
+		return -ENOSPC;
+
+	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+		if (!validate_event(&fake_pmu, sibling))
+			return -ENOSPC;
+	}
+
+	if (!validate_event(&fake_pmu, event))
+		return -ENOSPC;
+
+	return 0;
+}
+
 const struct pmu *hw_perf_event_init(struct perf_event *event)
 {
 	int err;
 
 	err = __hw_perf_event_init(event);
+	if (!err) {
+		if (event->group_leader != event)
+			err = validate_group(event);
+	}
 	if (err) {
 		if (event->destroy)
 			event->destroy(event);
@@ -2132,7 +2297,7 @@ void callchain_store(struct perf_callchain_entry *entry, u64 ip)
 
 static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
 static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_nmi_entry);
-static DEFINE_PER_CPU(int, in_nmi_frame);
+static DEFINE_PER_CPU(int, in_ignored_frame);
 
 
 static void
@@ -2148,8 +2313,9 @@ static void backtrace_warning(void *data, char *msg)
 
 static int backtrace_stack(void *data, char *name)
 {
-	per_cpu(in_nmi_frame, smp_processor_id()) =
-			x86_is_stack_id(NMI_STACK, name);
+	per_cpu(in_ignored_frame, smp_processor_id()) =
+			x86_is_stack_id(NMI_STACK, name) ||
+			x86_is_stack_id(DEBUG_STACK, name);
 
 	return 0;
 }
@@ -2158,7 +2324,7 @@ static void backtrace_address(void *data, unsigned long addr, int reliable)
 {
 	struct perf_callchain_entry *entry = data;
 
-	if (per_cpu(in_nmi_frame, smp_processor_id()))
+	if (per_cpu(in_ignored_frame, smp_processor_id()))
 		return;
 
 	if (reliable)
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index fab786f60ed6..898df9719afb 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -712,7 +712,7 @@ static void probe_nmi_watchdog(void)
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
 		if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15 &&
-		    boot_cpu_data.x86 != 16)
+		    boot_cpu_data.x86 != 16 && boot_cpu_data.x86 != 17)
 			return;
 		wd_ops = &k7_wd_ops;
 		break;
diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c
index bb62b3e5caad..28000743bbb0 100644
--- a/arch/x86/kernel/cpu/transmeta.c
+++ b/arch/x86/kernel/cpu/transmeta.c
@@ -26,7 +26,7 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
 
 	early_init_transmeta(c);
 
-	display_cacheinfo(c);
+	cpu_detect_cache_sizes(c);
 
 	/* Print CMS and CPU revision */
 	max = cpuid_eax(0x80860000);
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 6a52d4b36a30..7ef24a796992 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -116,21 +116,16 @@ static int cpuid_open(struct inode *inode, struct file *file)
 {
 	unsigned int cpu;
 	struct cpuinfo_x86 *c;
-	int ret = 0;
-
-	lock_kernel();
 
 	cpu = iminor(file->f_path.dentry->d_inode);
-	if (cpu >= nr_cpu_ids || !cpu_online(cpu)) {
-		ret = -ENXIO;	/* No such CPU */
-		goto out;
-	}
+	if (cpu >= nr_cpu_ids || !cpu_online(cpu))
+		return -ENXIO;	/* No such CPU */
+
 	c = &cpu_data(cpu);
 	if (c->cpuid_level < 0)
-		ret = -EIO;	/* CPUID not supported */
-out:
-	unlock_kernel();
-	return ret;
+		return -EIO;	/* CPUID not supported */
+
+	return 0;
 }
 
 /*
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 5e409dc298a4..a4849c10a77e 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -27,8 +27,7 @@
 #include <asm/cpu.h>
 #include <asm/reboot.h>
 #include <asm/virtext.h>
-#include <asm/iommu.h>
-
+#include <asm/x86_init.h>
 
 #if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
 
@@ -106,7 +105,7 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
 #endif
 
 #ifdef CONFIG_X86_64
-	pci_iommu_shutdown();
+	x86_platform.iommu_shutdown();
 #endif
 
 	crash_save_cpu(regs, safe_smp_processor_id());
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 2d8a371d4339..b8ce165dde5d 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -268,11 +268,12 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 
 	show_registers(regs);
 #ifdef CONFIG_X86_32
-	sp = (unsigned long) (&regs->sp);
-	savesegment(ss, ss);
-	if (user_mode(regs)) {
+	if (user_mode_vm(regs)) {
 		sp = regs->sp;
 		ss = regs->ss & 0xffff;
+	} else {
+		sp = kernel_stack_pointer(regs);
+		savesegment(ss, ss);
 	}
 	printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip);
 	print_symbol("%s", regs->ip);
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index f7dd2a7c3bf4..e0ed4c7abb62 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -10,9 +10,9 @@
 #include <linux/module.h>
 #include <linux/ptrace.h>
 #include <linux/kexec.h>
+#include <linux/sysfs.h>
 #include <linux/bug.h>
 #include <linux/nmi.h>
-#include <linux/sysfs.h>
 
 #include <asm/stacktrace.h>
 
@@ -35,6 +35,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 
 	if (!stack) {
 		unsigned long dummy;
+
 		stack = &dummy;
 		if (task && task != current)
 			stack = (unsigned long *)task->thread.sp;
@@ -57,8 +58,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 
 		context = (struct thread_info *)
 			((unsigned long)stack & (~(THREAD_SIZE - 1)));
-		bp = print_context_stack(context, stack, bp, ops,
-					 data, NULL, &graph);
+		bp = print_context_stack(context, stack, bp, ops, data, NULL, &graph);
 
 		stack = (unsigned long *)context->previous_esp;
 		if (!stack)
@@ -72,7 +72,7 @@ EXPORT_SYMBOL(dump_trace);
 
 void
 show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *sp, unsigned long bp, char *log_lvl)
+		   unsigned long *sp, unsigned long bp, char *log_lvl)
 {
 	unsigned long *stack;
 	int i;
@@ -156,4 +156,3 @@ int is_valid_bugaddr(unsigned long ip)
 
 	return ud2 == 0x0b0f;
 }
-
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index a071e6be177e..b13af53883aa 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -10,26 +10,28 @@
 #include <linux/module.h>
 #include <linux/ptrace.h>
 #include <linux/kexec.h>
+#include <linux/sysfs.h>
 #include <linux/bug.h>
 #include <linux/nmi.h>
-#include <linux/sysfs.h>
 
 #include <asm/stacktrace.h>
 
 #include "dumpstack.h"
 
+#define N_EXCEPTION_STACKS_END \
+		(N_EXCEPTION_STACKS + DEBUG_STKSZ/EXCEPTION_STKSZ - 2)
 
 static char x86_stack_ids[][8] = {
-		[DEBUG_STACK - 1] = "#DB",
-		[NMI_STACK - 1] = "NMI",
-		[DOUBLEFAULT_STACK - 1] = "#DF",
-		[STACKFAULT_STACK - 1] = "#SS",
-		[MCE_STACK - 1] = "#MC",
+		[ DEBUG_STACK-1			]	= "#DB",
+		[ NMI_STACK-1			]	= "NMI",
+		[ DOUBLEFAULT_STACK-1		]	= "#DF",
+		[ STACKFAULT_STACK-1		]	= "#SS",
+		[ MCE_STACK-1			]	= "#MC",
 #if DEBUG_STKSZ > EXCEPTION_STKSZ
-		[N_EXCEPTION_STACKS ...
-			N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
+		[ N_EXCEPTION_STACKS ...
+		  N_EXCEPTION_STACKS_END	]	= "#DB[?]"
 #endif
-	};
+};
 
 int x86_is_stack_id(int id, char *name)
 {
@@ -37,7 +39,7 @@ int x86_is_stack_id(int id, char *name)
 }
 
 static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
-					unsigned *usedp, char **idp)
+					 unsigned *usedp, char **idp)
 {
 	unsigned k;
 
@@ -101,6 +103,35 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
 	return NULL;
 }
 
+static inline int
+in_irq_stack(unsigned long *stack, unsigned long *irq_stack,
+	     unsigned long *irq_stack_end)
+{
+	return (stack >= irq_stack && stack < irq_stack_end);
+}
+
+/*
+ * We are returning from the irq stack and go to the previous one.
+ * If the previous stack is also in the irq stack, then bp in the first
+ * frame of the irq stack points to the previous, interrupted one.
+ * Otherwise we have another level of indirection: We first save
+ * the bp of the previous stack, then we switch the stack to the irq one
+ * and save a new bp that links to the previous one.
+ * (See save_args())
+ */
+static inline unsigned long
+fixup_bp_irq_link(unsigned long bp, unsigned long *stack,
+		  unsigned long *irq_stack, unsigned long *irq_stack_end)
+{
+#ifdef CONFIG_FRAME_POINTER
+	struct stack_frame *frame = (struct stack_frame *)bp;
+
+	if (!in_irq_stack(stack, irq_stack, irq_stack_end))
+		return (unsigned long)frame->next_frame;
+#endif
+	return bp;
+}
+
 /*
  * x86-64 can have up to three kernel stacks:
  * process stack
@@ -173,7 +204,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 			irq_stack = irq_stack_end -
 				(IRQ_STACK_SIZE - 64) / sizeof(*irq_stack);
 
-			if (stack >= irq_stack && stack < irq_stack_end) {
+			if (in_irq_stack(stack, irq_stack, irq_stack_end)) {
 				if (ops->stack(data, "IRQ") < 0)
 					break;
 				bp = print_context_stack(tinfo, stack, bp,
@@ -184,6 +215,8 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 				 * pointer (index -1 to end) in the IRQ stack:
 				 */
 				stack = (unsigned long *) (irq_stack_end[-1]);
+				bp = fixup_bp_irq_link(bp, stack, irq_stack,
+						       irq_stack_end);
 				irq_stack_end = NULL;
 				ops->stack(data, "EOI");
 				continue;
@@ -202,21 +235,24 @@ EXPORT_SYMBOL(dump_trace);
 
 void
 show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *sp, unsigned long bp, char *log_lvl)
+		   unsigned long *sp, unsigned long bp, char *log_lvl)
 {
+	unsigned long *irq_stack_end;
+	unsigned long *irq_stack;
 	unsigned long *stack;
+	int cpu;
 	int i;
-	const int cpu = smp_processor_id();
-	unsigned long *irq_stack_end =
-		(unsigned long *)(per_cpu(irq_stack_ptr, cpu));
-	unsigned long *irq_stack =
-		(unsigned long *)(per_cpu(irq_stack_ptr, cpu) - IRQ_STACK_SIZE);
+
+	preempt_disable();
+	cpu = smp_processor_id();
+
+	irq_stack_end	= (unsigned long *)(per_cpu(irq_stack_ptr, cpu));
+	irq_stack	= (unsigned long *)(per_cpu(irq_stack_ptr, cpu) - IRQ_STACK_SIZE);
 
 	/*
-	 * debugging aid: "show_stack(NULL, NULL);" prints the
-	 * back trace for this cpu.
+	 * Debugging aid: "show_stack(NULL, NULL);" prints the
+	 * back trace for this cpu:
 	 */
-
 	if (sp == NULL) {
 		if (task)
 			sp = (unsigned long *)task->thread.sp;
@@ -240,6 +276,8 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
 		printk(" %016lx", *stack++);
 		touch_nmi_watchdog();
 	}
+	preempt_enable();
+
 	printk("\n");
 	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
 }
@@ -303,4 +341,3 @@ int is_valid_bugaddr(unsigned long ip)
 
 	return ud2 == 0x0b0f;
 }
-
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index c097e7d607c6..50b9c220e121 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -334,6 +334,10 @@ ENTRY(ret_from_fork)
 END(ret_from_fork)
 
 /*
+ * Interrupt exit functions should be protected against kprobes
+ */
+	.pushsection .kprobes.text, "ax"
+/*
  * Return to user mode is not as complex as all this looks,
  * but we want the default path for a system call return to
  * go as quickly as possible which is why some of this is
@@ -383,6 +387,10 @@ need_resched:
 END(resume_kernel)
 #endif
 	CFI_ENDPROC
+/*
+ * End of kprobes section
+ */
+	.popsection
 
 /* SYSENTER_RETURN points to after the "sysenter" instruction in
    the vsyscall page.  See vsyscall-sysentry.S, which defines the symbol.  */
@@ -513,6 +521,10 @@ sysexit_audit:
 	PTGS_TO_GS_EX
 ENDPROC(ia32_sysenter_target)
 
+/*
+ * syscall stub including irq exit should be protected against kprobes
+ */
+	.pushsection .kprobes.text, "ax"
 	# system call handler stub
 ENTRY(system_call)
 	RING0_INT_FRAME			# can't unwind into user space anyway
@@ -705,6 +717,10 @@ syscall_badsys:
 	jmp resume_userspace
 END(syscall_badsys)
 	CFI_ENDPROC
+/*
+ * End of kprobes section
+ */
+	.popsection
 
 /*
  * System calls that need a pt_regs pointer.
@@ -814,6 +830,10 @@ common_interrupt:
 ENDPROC(common_interrupt)
 	CFI_ENDPROC
 
+/*
+ *  Irq entries should be protected against kprobes
+ */
+	.pushsection .kprobes.text, "ax"
 #define BUILD_INTERRUPT3(name, nr, fn)	\
 ENTRY(name)				\
 	RING0_INT_FRAME;		\
@@ -980,6 +1000,10 @@ ENTRY(spurious_interrupt_bug)
 	jmp error_code
 	CFI_ENDPROC
 END(spurious_interrupt_bug)
+/*
+ * End of kprobes section
+ */
+	.popsection
 
 ENTRY(kernel_thread_helper)
 	pushl $0		# fake return address for unwinder
@@ -1185,17 +1209,14 @@ END(ftrace_graph_caller)
 
 .globl return_to_handler
 return_to_handler:
-	pushl $0
 	pushl %eax
-	pushl %ecx
 	pushl %edx
 	movl %ebp, %eax
 	call ftrace_return_to_handler
-	movl %eax, 0xc(%esp)
+	movl %eax, %ecx
 	popl %edx
-	popl %ecx
 	popl %eax
-	ret
+	jmp *%ecx
 #endif
 
 .section .rodata,"a"
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index b5c061f8f358..673f693fb451 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -155,11 +155,11 @@ GLOBAL(return_to_handler)
 
 	call ftrace_return_to_handler
 
-	movq %rax, 16(%rsp)
+	movq %rax, %rdi
 	movq 8(%rsp), %rdx
 	movq (%rsp), %rax
-	addq $16, %rsp
-	retq
+	addq $24, %rsp
+	jmp *%rdi
 #endif
 
 
@@ -803,6 +803,10 @@ END(interrupt)
 	call \func
 	.endm
 
+/*
+ * Interrupt entry/exit should be protected against kprobes
+ */
+	.pushsection .kprobes.text, "ax"
 	/*
 	 * The interrupt stubs push (~vector+0x80) onto the stack and
 	 * then jump to common_interrupt.
@@ -941,6 +945,10 @@ ENTRY(retint_kernel)
 
 	CFI_ENDPROC
 END(common_interrupt)
+/*
+ * End of kprobes section
+ */
+       .popsection
 
 /*
  * APIC interrupts.
@@ -969,8 +977,8 @@ apicinterrupt UV_BAU_MESSAGE \
 #endif
 apicinterrupt LOCAL_TIMER_VECTOR \
 	apic_timer_interrupt smp_apic_timer_interrupt
-apicinterrupt GENERIC_INTERRUPT_VECTOR \
-	generic_interrupt smp_generic_interrupt
+apicinterrupt X86_PLATFORM_IPI_VECTOR \
+	x86_platform_ipi smp_x86_platform_ipi
 
 #ifdef CONFIG_SMP
 apicinterrupt INVALIDATE_TLB_VECTOR_START+0 \
@@ -1068,10 +1076,10 @@ ENTRY(\sym)
 	TRACE_IRQS_OFF
 	movq %rsp,%rdi		/* pt_regs pointer */
 	xorl %esi,%esi		/* no error code */
-	PER_CPU(init_tss, %rbp)
-	subq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp)
+	PER_CPU(init_tss, %r12)
+	subq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%r12)
 	call \do_sym
-	addq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp)
+	addq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%r12)
 	jmp paranoid_exit	/* %ebx: no swapgs flag */
 	CFI_ENDPROC
 END(\sym)
@@ -1491,12 +1499,17 @@ error_kernelspace:
 	leaq irq_return(%rip),%rcx
 	cmpq %rcx,RIP+8(%rsp)
 	je error_swapgs
-	movl %ecx,%ecx	/* zero extend */
-	cmpq %rcx,RIP+8(%rsp)
-	je error_swapgs
+	movl %ecx,%eax	/* zero extend */
+	cmpq %rax,RIP+8(%rsp)
+	je bstep_iret
 	cmpq $gs_change,RIP+8(%rsp)
 	je error_swapgs
 	jmp error_sti
+
+bstep_iret:
+	/* Fix truncated RIP */
+	movq %rcx,RIP+8(%rsp)
+	jmp error_swapgs
 END(error_entry)
 
 
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 9dbb527e1652..309689245431 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -9,6 +9,8 @@
  * the dangers of modifying code on the run.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/spinlock.h>
 #include <linux/hardirq.h>
 #include <linux/uaccess.h>
@@ -187,9 +189,26 @@ static void wait_for_nmi(void)
 	nmi_wait_count++;
 }
 
+static inline int
+within(unsigned long addr, unsigned long start, unsigned long end)
+{
+	return addr >= start && addr < end;
+}
+
 static int
 do_ftrace_mod_code(unsigned long ip, void *new_code)
 {
+	/*
+	 * On x86_64, kernel text mappings are mapped read-only with
+	 * CONFIG_DEBUG_RODATA. So we use the kernel identity mapping instead
+	 * of the kernel text mapping to modify the kernel text.
+	 *
+	 * For 32bit kernels, these mappings are same and we can use
+	 * kernel identity mapping to modify code.
+	 */
+	if (within(ip, (unsigned long)_text, (unsigned long)_etext))
+		ip = (unsigned long)__va(__pa(ip));
+
 	mod_code_ip = (void *)ip;
 	mod_code_newcode = new_code;
 
@@ -336,15 +355,15 @@ int __init ftrace_dyn_arch_init(void *data)
 
 	switch (faulted) {
 	case 0:
-		pr_info("ftrace: converting mcount calls to 0f 1f 44 00 00\n");
+		pr_info("converting mcount calls to 0f 1f 44 00 00\n");
 		memcpy(ftrace_nop, ftrace_test_p6nop, MCOUNT_INSN_SIZE);
 		break;
 	case 1:
-		pr_info("ftrace: converting mcount calls to 66 66 66 66 90\n");
+		pr_info("converting mcount calls to 66 66 66 66 90\n");
 		memcpy(ftrace_nop, ftrace_test_nop5, MCOUNT_INSN_SIZE);
 		break;
 	case 2:
-		pr_info("ftrace: converting mcount calls to jmp . + 5\n");
+		pr_info("converting mcount calls to jmp . + 5\n");
 		memcpy(ftrace_nop, ftrace_test_jmp, MCOUNT_INSN_SIZE);
 		break;
 	}
@@ -468,82 +487,10 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 
 #ifdef CONFIG_FTRACE_SYSCALLS
 
-extern unsigned long __start_syscalls_metadata[];
-extern unsigned long __stop_syscalls_metadata[];
 extern unsigned long *sys_call_table;
 
-static struct syscall_metadata **syscalls_metadata;
-
-static struct syscall_metadata *find_syscall_meta(unsigned long *syscall)
-{
-	struct syscall_metadata *start;
-	struct syscall_metadata *stop;
-	char str[KSYM_SYMBOL_LEN];
-
-
-	start = (struct syscall_metadata *)__start_syscalls_metadata;
-	stop = (struct syscall_metadata *)__stop_syscalls_metadata;
-	kallsyms_lookup((unsigned long) syscall, NULL, NULL, NULL, str);
-
-	for ( ; start < stop; start++) {
-		if (start->name && !strcmp(start->name, str))
-			return start;
-	}
-	return NULL;
-}
-
-struct syscall_metadata *syscall_nr_to_meta(int nr)
-{
-	if (!syscalls_metadata || nr >= NR_syscalls || nr < 0)
-		return NULL;
-
-	return syscalls_metadata[nr];
-}
-
-int syscall_name_to_nr(char *name)
-{
-	int i;
-
-	if (!syscalls_metadata)
-		return -1;
-
-	for (i = 0; i < NR_syscalls; i++) {
-		if (syscalls_metadata[i]) {
-			if (!strcmp(syscalls_metadata[i]->name, name))
-				return i;
-		}
-	}
-	return -1;
-}
-
-void set_syscall_enter_id(int num, int id)
-{
-	syscalls_metadata[num]->enter_id = id;
-}
-
-void set_syscall_exit_id(int num, int id)
+unsigned long __init arch_syscall_addr(int nr)
 {
-	syscalls_metadata[num]->exit_id = id;
-}
-
-static int __init arch_init_ftrace_syscalls(void)
-{
-	int i;
-	struct syscall_metadata *meta;
-	unsigned long **psys_syscall_table = &sys_call_table;
-
-	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
-					NR_syscalls, GFP_KERNEL);
-	if (!syscalls_metadata) {
-		WARN_ON(1);
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < NR_syscalls; i++) {
-		meta = find_syscall_meta(psys_syscall_table[i]);
-		syscalls_metadata[i] = meta;
-	}
-	return 0;
+	return (unsigned long)(&sys_call_table)[nr];
 }
-arch_initcall(arch_init_ftrace_syscalls);
 #endif
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 050c278481b1..7fd318bac59c 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -18,6 +18,8 @@
 #include <asm/asm-offsets.h>
 #include <asm/setup.h>
 #include <asm/processor-flags.h>
+#include <asm/msr-index.h>
+#include <asm/cpufeature.h>
 #include <asm/percpu.h>
 
 /* Physical address */
@@ -297,25 +299,27 @@ ENTRY(startup_32_smp)
 	orl %edx,%eax
 	movl %eax,%cr4
 
-	btl $5, %eax		# check if PAE is enabled
-	jnc 6f
+	testb $X86_CR4_PAE, %al		# check if PAE is enabled
+	jz 6f
 
 	/* Check if extended functions are implemented */
 	movl $0x80000000, %eax
 	cpuid
-	cmpl $0x80000000, %eax
-	jbe 6f
+	/* Value must be in the range 0x80000001 to 0x8000ffff */
+	subl $0x80000001, %eax
+	cmpl $(0x8000ffff-0x80000001), %eax
+	ja 6f
 	mov $0x80000001, %eax
 	cpuid
 	/* Execute Disable bit supported? */
-	btl $20, %edx
+	btl $(X86_FEATURE_NX & 31), %edx
 	jnc 6f
 
 	/* Setup EFER (Extended Feature Enable Register) */
-	movl $0xc0000080, %ecx
+	movl $MSR_EFER, %ecx
 	rdmsr
 
-	btsl $11, %eax
+	btsl $_EFER_NX, %eax
 	/* Make changes effective */
 	wrmsr
 
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 780cd928fcd5..2d8b5035371c 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -212,8 +212,8 @@ ENTRY(secondary_startup_64)
 	 */
 	lgdt	early_gdt_descr(%rip)
 
-	/* set up data segments. actually 0 would do too */
-	movl $__KERNEL_DS,%eax
+	/* set up data segments */
+	xorl %eax,%eax
 	movl %eax,%ds
 	movl %eax,%ss
 	movl %eax,%es
@@ -262,11 +262,11 @@ ENTRY(secondary_startup_64)
 	.quad	x86_64_start_kernel
 	ENTRY(initial_gs)
 	.quad	INIT_PER_CPU_VAR(irq_stack_union)
-	__FINITDATA
 
 	ENTRY(stack_start)
 	.quad  init_thread_union+THREAD_SIZE-8
 	.word  0
+	__FINITDATA
 
 bad_address:
 	jmp bad_address
@@ -340,6 +340,7 @@ ENTRY(name)
 	i = i + 1 ;					\
 	.endr
 
+	.data
 	/*
 	 * This default setting generates an ident mapping at address 0x100000
 	 * and a mapping for the kernel that precisely maps virtual address
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index dedc2bddf7a5..ba6e65884603 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -33,6 +33,7 @@
  * HPET address is set in acpi/boot.c, when an ACPI entry exists
  */
 unsigned long				hpet_address;
+u8					hpet_blockid; /* OS timer block num */
 #ifdef CONFIG_PCI_MSI
 static unsigned long			hpet_num_timers;
 #endif
@@ -47,12 +48,12 @@ struct hpet_dev {
 	char				name[10];
 };
 
-unsigned long hpet_readl(unsigned long a)
+inline unsigned int hpet_readl(unsigned int a)
 {
 	return readl(hpet_virt_address + a);
 }
 
-static inline void hpet_writel(unsigned long d, unsigned long a)
+static inline void hpet_writel(unsigned int d, unsigned int a)
 {
 	writel(d, hpet_virt_address + a);
 }
@@ -167,7 +168,7 @@ do {								\
 
 static void hpet_reserve_msi_timers(struct hpet_data *hd);
 
-static void hpet_reserve_platform_timers(unsigned long id)
+static void hpet_reserve_platform_timers(unsigned int id)
 {
 	struct hpet __iomem *hpet = hpet_virt_address;
 	struct hpet_timer __iomem *timer = &hpet->hpet_timers[2];
@@ -205,7 +206,7 @@ static void hpet_reserve_platform_timers(unsigned long id)
 
 }
 #else
-static void hpet_reserve_platform_timers(unsigned long id) { }
+static void hpet_reserve_platform_timers(unsigned int id) { }
 #endif
 
 /*
@@ -246,7 +247,7 @@ static void hpet_reset_counter(void)
 
 static void hpet_start_counter(void)
 {
-	unsigned long cfg = hpet_readl(HPET_CFG);
+	unsigned int cfg = hpet_readl(HPET_CFG);
 	cfg |= HPET_CFG_ENABLE;
 	hpet_writel(cfg, HPET_CFG);
 }
@@ -271,7 +272,7 @@ static void hpet_resume_counter(void)
 
 static void hpet_enable_legacy_int(void)
 {
-	unsigned long cfg = hpet_readl(HPET_CFG);
+	unsigned int cfg = hpet_readl(HPET_CFG);
 
 	cfg |= HPET_CFG_LEGACY;
 	hpet_writel(cfg, HPET_CFG);
@@ -314,7 +315,7 @@ static int hpet_setup_msi_irq(unsigned int irq);
 static void hpet_set_mode(enum clock_event_mode mode,
 			  struct clock_event_device *evt, int timer)
 {
-	unsigned long cfg, cmp, now;
+	unsigned int cfg, cmp, now;
 	uint64_t delta;
 
 	switch (mode) {
@@ -323,7 +324,7 @@ static void hpet_set_mode(enum clock_event_mode mode,
 		delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
 		delta >>= evt->shift;
 		now = hpet_readl(HPET_COUNTER);
-		cmp = now + (unsigned long) delta;
+		cmp = now + (unsigned int) delta;
 		cfg = hpet_readl(HPET_Tn_CFG(timer));
 		/* Make sure we use edge triggered interrupts */
 		cfg &= ~HPET_TN_LEVEL;
@@ -339,7 +340,7 @@ static void hpet_set_mode(enum clock_event_mode mode,
 		 * (See AMD-8111 HyperTransport I/O Hub Data Sheet,
 		 * Publication # 24674)
 		 */
-		hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
+		hpet_writel((unsigned int) delta, HPET_Tn_CMP(timer));
 		hpet_start_counter();
 		hpet_print_config();
 		break;
@@ -383,13 +384,24 @@ static int hpet_next_event(unsigned long delta,
 	hpet_writel(cnt, HPET_Tn_CMP(timer));
 
 	/*
-	 * We need to read back the CMP register to make sure that
-	 * what we wrote hit the chip before we compare it to the
-	 * counter.
+	 * We need to read back the CMP register on certain HPET
+	 * implementations (ATI chipsets) which seem to delay the
+	 * transfer of the compare register into the internal compare
+	 * logic. With small deltas this might actually be too late as
+	 * the counter could already be higher than the compare value
+	 * at that point and we would wait for the next hpet interrupt
+	 * forever. We found out that reading the CMP register back
+	 * forces the transfer so we can rely on the comparison with
+	 * the counter register below. If the read back from the
+	 * compare register does not match the value we programmed
+	 * then we might have a real hardware problem. We can not do
+	 * much about it here, but at least alert the user/admin with
+	 * a prominent warning.
 	 */
-	WARN_ON_ONCE((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt);
+	WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt,
+		  KERN_WARNING "hpet: compare register read back failed.\n");
 
-	return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
+	return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
 }
 
 static void hpet_legacy_set_mode(enum clock_event_mode mode,
@@ -415,7 +427,7 @@ static struct hpet_dev	*hpet_devs;
 void hpet_msi_unmask(unsigned int irq)
 {
 	struct hpet_dev *hdev = get_irq_data(irq);
-	unsigned long cfg;
+	unsigned int cfg;
 
 	/* unmask it */
 	cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
@@ -425,7 +437,7 @@ void hpet_msi_unmask(unsigned int irq)
 
 void hpet_msi_mask(unsigned int irq)
 {
-	unsigned long cfg;
+	unsigned int cfg;
 	struct hpet_dev *hdev = get_irq_data(irq);
 
 	/* mask it */
@@ -467,7 +479,7 @@ static int hpet_msi_next_event(unsigned long delta,
 
 static int hpet_setup_msi_irq(unsigned int irq)
 {
-	if (arch_setup_hpet_msi(irq)) {
+	if (arch_setup_hpet_msi(irq, hpet_blockid)) {
 		destroy_irq(irq);
 		return -EINVAL;
 	}
@@ -584,6 +596,8 @@ static void hpet_msi_capability_lookup(unsigned int start_timer)
 	unsigned int num_timers_used = 0;
 	int i;
 
+	if (boot_cpu_has(X86_FEATURE_ARAT))
+		return;
 	id = hpet_readl(HPET_ID);
 
 	num_timers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT);
@@ -598,7 +612,7 @@ static void hpet_msi_capability_lookup(unsigned int start_timer)
 
 	for (i = start_timer; i < num_timers - RESERVE_TIMERS; i++) {
 		struct hpet_dev *hdev = &hpet_devs[num_timers_used];
-		unsigned long cfg = hpet_readl(HPET_Tn_CFG(i));
+		unsigned int cfg = hpet_readl(HPET_Tn_CFG(i));
 
 		/* Only consider HPET timer with MSI support */
 		if (!(cfg & HPET_TN_FSB_CAP))
@@ -813,7 +827,7 @@ static int hpet_clocksource_register(void)
  */
 int __init hpet_enable(void)
 {
-	unsigned long id;
+	unsigned int id;
 	int i;
 
 	if (!is_hpet_capable())
@@ -872,10 +886,8 @@ int __init hpet_enable(void)
 
 	if (id & HPET_ID_LEGSUP) {
 		hpet_legacy_clockevent_register();
-		hpet_msi_capability_lookup(2);
 		return 1;
 	}
-	hpet_msi_capability_lookup(0);
 	return 0;
 
 out_nohpet:
@@ -908,9 +920,17 @@ static __init int hpet_late_init(void)
 	if (!hpet_virt_address)
 		return -ENODEV;
 
+	if (hpet_readl(HPET_ID) & HPET_ID_LEGSUP)
+		hpet_msi_capability_lookup(2);
+	else
+		hpet_msi_capability_lookup(0);
+
 	hpet_reserve_platform_timers(hpet_readl(HPET_ID));
 	hpet_print_config();
 
+	if (boot_cpu_has(X86_FEATURE_ARAT))
+		return 0;
+
 	for_each_online_cpu(cpu) {
 		hpet_cpuhp_notify(NULL, CPU_ONLINE, (void *)(long)cpu);
 	}
@@ -925,7 +945,7 @@ fs_initcall(hpet_late_init);
 void hpet_disable(void)
 {
 	if (is_hpet_capable()) {
-		unsigned long cfg = hpet_readl(HPET_CFG);
+		unsigned int cfg = hpet_readl(HPET_CFG);
 
 		if (hpet_legacy_int_enabled) {
 			cfg &= ~HPET_CFG_LEGACY;
@@ -965,8 +985,8 @@ static int hpet_prev_update_sec;
 static struct rtc_time hpet_alarm_time;
 static unsigned long hpet_pie_count;
 static u32 hpet_t1_cmp;
-static unsigned long hpet_default_delta;
-static unsigned long hpet_pie_delta;
+static u32 hpet_default_delta;
+static u32 hpet_pie_delta;
 static unsigned long hpet_pie_limit;
 
 static rtc_irq_handler irq_handler;
@@ -1017,7 +1037,8 @@ EXPORT_SYMBOL_GPL(hpet_unregister_irq_handler);
  */
 int hpet_rtc_timer_init(void)
 {
-	unsigned long cfg, cnt, delta, flags;
+	unsigned int cfg, cnt, delta;
+	unsigned long flags;
 
 	if (!is_hpet_enabled())
 		return 0;
@@ -1027,7 +1048,7 @@ int hpet_rtc_timer_init(void)
 
 		clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC;
 		clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT;
-		hpet_default_delta = (unsigned long) clc;
+		hpet_default_delta = clc;
 	}
 
 	if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
@@ -1113,7 +1134,7 @@ int hpet_set_periodic_freq(unsigned long freq)
 		clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC;
 		do_div(clc, freq);
 		clc >>= hpet_clockevent.shift;
-		hpet_pie_delta = (unsigned long) clc;
+		hpet_pie_delta = clc;
 	}
 	return 1;
 }
@@ -1127,7 +1148,7 @@ EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq);
 
 static void hpet_rtc_timer_reinit(void)
 {
-	unsigned long cfg, delta;
+	unsigned int cfg, delta;
 	int lost_ints = -1;
 
 	if (unlikely(!hpet_rtc_flags)) {
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
new file mode 100644
index 000000000000..05d5fec64a94
--- /dev/null
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -0,0 +1,554 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 Alan Stern
+ * Copyright (C) 2009 IBM Corporation
+ * Copyright (C) 2009 Frederic Weisbecker <fweisbec@gmail.com>
+ *
+ * Authors: Alan Stern <stern@rowland.harvard.edu>
+ *          K.Prasad <prasad@linux.vnet.ibm.com>
+ *          Frederic Weisbecker <fweisbec@gmail.com>
+ */
+
+/*
+ * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
+ * using the CPU's debug registers.
+ */
+
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/irqflags.h>
+#include <linux/notifier.h>
+#include <linux/kallsyms.h>
+#include <linux/kprobes.h>
+#include <linux/percpu.h>
+#include <linux/kdebug.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/hw_breakpoint.h>
+#include <asm/processor.h>
+#include <asm/debugreg.h>
+
+/* Per cpu debug control register value */
+DEFINE_PER_CPU(unsigned long, cpu_dr7);
+EXPORT_PER_CPU_SYMBOL(cpu_dr7);
+
+/* Per cpu debug address registers values */
+static DEFINE_PER_CPU(unsigned long, cpu_debugreg[HBP_NUM]);
+
+/*
+ * Stores the breakpoints currently in use on each breakpoint address
+ * register for each cpus
+ */
+static DEFINE_PER_CPU(struct perf_event *, bp_per_reg[HBP_NUM]);
+
+
+static inline unsigned long
+__encode_dr7(int drnum, unsigned int len, unsigned int type)
+{
+	unsigned long bp_info;
+
+	bp_info = (len | type) & 0xf;
+	bp_info <<= (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE);
+	bp_info |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE));
+
+	return bp_info;
+}
+
+/*
+ * Encode the length, type, Exact, and Enable bits for a particular breakpoint
+ * as stored in debug register 7.
+ */
+unsigned long encode_dr7(int drnum, unsigned int len, unsigned int type)
+{
+	return __encode_dr7(drnum, len, type) | DR_GLOBAL_SLOWDOWN;
+}
+
+/*
+ * Decode the length and type bits for a particular breakpoint as
+ * stored in debug register 7.  Return the "enabled" status.
+ */
+int decode_dr7(unsigned long dr7, int bpnum, unsigned *len, unsigned *type)
+{
+	int bp_info = dr7 >> (DR_CONTROL_SHIFT + bpnum * DR_CONTROL_SIZE);
+
+	*len = (bp_info & 0xc) | 0x40;
+	*type = (bp_info & 0x3) | 0x80;
+
+	return (dr7 >> (bpnum * DR_ENABLE_SIZE)) & 0x3;
+}
+
+/*
+ * Install a perf counter breakpoint.
+ *
+ * We seek a free debug address register and use it for this
+ * breakpoint. Eventually we enable it in the debug control register.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+int arch_install_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	unsigned long *dr7;
+	int i;
+
+	for (i = 0; i < HBP_NUM; i++) {
+		struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+
+		if (!*slot) {
+			*slot = bp;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == HBP_NUM, "Can't find any breakpoint slot"))
+		return -EBUSY;
+
+	set_debugreg(info->address, i);
+	__get_cpu_var(cpu_debugreg[i]) = info->address;
+
+	dr7 = &__get_cpu_var(cpu_dr7);
+	*dr7 |= encode_dr7(i, info->len, info->type);
+
+	set_debugreg(*dr7, 7);
+
+	return 0;
+}
+
+/*
+ * Uninstall the breakpoint contained in the given counter.
+ *
+ * First we search the debug address register it uses and then we disable
+ * it.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	unsigned long *dr7;
+	int i;
+
+	for (i = 0; i < HBP_NUM; i++) {
+		struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+
+		if (*slot == bp) {
+			*slot = NULL;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == HBP_NUM, "Can't find any breakpoint slot"))
+		return;
+
+	dr7 = &__get_cpu_var(cpu_dr7);
+	*dr7 &= ~__encode_dr7(i, info->len, info->type);
+
+	set_debugreg(*dr7, 7);
+}
+
+static int get_hbp_len(u8 hbp_len)
+{
+	unsigned int len_in_bytes = 0;
+
+	switch (hbp_len) {
+	case X86_BREAKPOINT_LEN_1:
+		len_in_bytes = 1;
+		break;
+	case X86_BREAKPOINT_LEN_2:
+		len_in_bytes = 2;
+		break;
+	case X86_BREAKPOINT_LEN_4:
+		len_in_bytes = 4;
+		break;
+#ifdef CONFIG_X86_64
+	case X86_BREAKPOINT_LEN_8:
+		len_in_bytes = 8;
+		break;
+#endif
+	}
+	return len_in_bytes;
+}
+
+/*
+ * Check for virtual address in user space.
+ */
+int arch_check_va_in_userspace(unsigned long va, u8 hbp_len)
+{
+	unsigned int len;
+
+	len = get_hbp_len(hbp_len);
+
+	return (va <= TASK_SIZE - len);
+}
+
+/*
+ * Check for virtual address in kernel space.
+ */
+static int arch_check_va_in_kernelspace(unsigned long va, u8 hbp_len)
+{
+	unsigned int len;
+
+	len = get_hbp_len(hbp_len);
+
+	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
+}
+
+/*
+ * Store a breakpoint's encoded address, length, and type.
+ */
+static int arch_store_info(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	/*
+	 * For kernel-addresses, either the address or symbol name can be
+	 * specified.
+	 */
+	if (info->name)
+		info->address = (unsigned long)
+				kallsyms_lookup_name(info->name);
+	if (info->address)
+		return 0;
+
+	return -EINVAL;
+}
+
+int arch_bp_generic_fields(int x86_len, int x86_type,
+			   int *gen_len, int *gen_type)
+{
+	/* Len */
+	switch (x86_len) {
+	case X86_BREAKPOINT_LEN_1:
+		*gen_len = HW_BREAKPOINT_LEN_1;
+		break;
+	case X86_BREAKPOINT_LEN_2:
+		*gen_len = HW_BREAKPOINT_LEN_2;
+		break;
+	case X86_BREAKPOINT_LEN_4:
+		*gen_len = HW_BREAKPOINT_LEN_4;
+		break;
+#ifdef CONFIG_X86_64
+	case X86_BREAKPOINT_LEN_8:
+		*gen_len = HW_BREAKPOINT_LEN_8;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	/* Type */
+	switch (x86_type) {
+	case X86_BREAKPOINT_EXECUTE:
+		*gen_type = HW_BREAKPOINT_X;
+		break;
+	case X86_BREAKPOINT_WRITE:
+		*gen_type = HW_BREAKPOINT_W;
+		break;
+	case X86_BREAKPOINT_RW:
+		*gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+static int arch_build_bp_info(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	info->address = bp->attr.bp_addr;
+
+	/* Len */
+	switch (bp->attr.bp_len) {
+	case HW_BREAKPOINT_LEN_1:
+		info->len = X86_BREAKPOINT_LEN_1;
+		break;
+	case HW_BREAKPOINT_LEN_2:
+		info->len = X86_BREAKPOINT_LEN_2;
+		break;
+	case HW_BREAKPOINT_LEN_4:
+		info->len = X86_BREAKPOINT_LEN_4;
+		break;
+#ifdef CONFIG_X86_64
+	case HW_BREAKPOINT_LEN_8:
+		info->len = X86_BREAKPOINT_LEN_8;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	/* Type */
+	switch (bp->attr.bp_type) {
+	case HW_BREAKPOINT_W:
+		info->type = X86_BREAKPOINT_WRITE;
+		break;
+	case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
+		info->type = X86_BREAKPOINT_RW;
+		break;
+	case HW_BREAKPOINT_X:
+		info->type = X86_BREAKPOINT_EXECUTE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+/*
+ * Validate the arch-specific HW Breakpoint register settings
+ */
+int arch_validate_hwbkpt_settings(struct perf_event *bp,
+				  struct task_struct *tsk)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	unsigned int align;
+	int ret;
+
+
+	ret = arch_build_bp_info(bp);
+	if (ret)
+		return ret;
+
+	ret = -EINVAL;
+
+	if (info->type == X86_BREAKPOINT_EXECUTE)
+		/*
+		 * Ptrace-refactoring code
+		 * For now, we'll allow instruction breakpoint only for user-space
+		 * addresses
+		 */
+		if ((!arch_check_va_in_userspace(info->address, info->len)) &&
+			info->len != X86_BREAKPOINT_EXECUTE)
+			return ret;
+
+	switch (info->len) {
+	case X86_BREAKPOINT_LEN_1:
+		align = 0;
+		break;
+	case X86_BREAKPOINT_LEN_2:
+		align = 1;
+		break;
+	case X86_BREAKPOINT_LEN_4:
+		align = 3;
+		break;
+#ifdef CONFIG_X86_64
+	case X86_BREAKPOINT_LEN_8:
+		align = 7;
+		break;
+#endif
+	default:
+		return ret;
+	}
+
+	ret = arch_store_info(bp);
+
+	if (ret < 0)
+		return ret;
+	/*
+	 * Check that the low-order bits of the address are appropriate
+	 * for the alignment implied by len.
+	 */
+	if (info->address & align)
+		return -EINVAL;
+
+	/* Check that the virtual address is in the proper range */
+	if (tsk) {
+		if (!arch_check_va_in_userspace(info->address, info->len))
+			return -EFAULT;
+	} else {
+		if (!arch_check_va_in_kernelspace(info->address, info->len))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+/*
+ * Dump the debug register contents to the user.
+ * We can't dump our per cpu values because it
+ * may contain cpu wide breakpoint, something that
+ * doesn't belong to the current task.
+ *
+ * TODO: include non-ptrace user breakpoints (perf)
+ */
+void aout_dump_debugregs(struct user *dump)
+{
+	int i;
+	int dr7 = 0;
+	struct perf_event *bp;
+	struct arch_hw_breakpoint *info;
+	struct thread_struct *thread = &current->thread;
+
+	for (i = 0; i < HBP_NUM; i++) {
+		bp = thread->ptrace_bps[i];
+
+		if (bp && !bp->attr.disabled) {
+			dump->u_debugreg[i] = bp->attr.bp_addr;
+			info = counter_arch_bp(bp);
+			dr7 |= encode_dr7(i, info->len, info->type);
+		} else {
+			dump->u_debugreg[i] = 0;
+		}
+	}
+
+	dump->u_debugreg[4] = 0;
+	dump->u_debugreg[5] = 0;
+	dump->u_debugreg[6] = current->thread.debugreg6;
+
+	dump->u_debugreg[7] = dr7;
+}
+EXPORT_SYMBOL_GPL(aout_dump_debugregs);
+
+/*
+ * Release the user breakpoints used by ptrace
+ */
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	int i;
+	struct thread_struct *t = &tsk->thread;
+
+	for (i = 0; i < HBP_NUM; i++) {
+		unregister_hw_breakpoint(t->ptrace_bps[i]);
+		t->ptrace_bps[i] = NULL;
+	}
+}
+
+void hw_breakpoint_restore(void)
+{
+	set_debugreg(__get_cpu_var(cpu_debugreg[0]), 0);
+	set_debugreg(__get_cpu_var(cpu_debugreg[1]), 1);
+	set_debugreg(__get_cpu_var(cpu_debugreg[2]), 2);
+	set_debugreg(__get_cpu_var(cpu_debugreg[3]), 3);
+	set_debugreg(current->thread.debugreg6, 6);
+	set_debugreg(__get_cpu_var(cpu_dr7), 7);
+}
+EXPORT_SYMBOL_GPL(hw_breakpoint_restore);
+
+/*
+ * Handle debug exception notifications.
+ *
+ * Return value is either NOTIFY_STOP or NOTIFY_DONE as explained below.
+ *
+ * NOTIFY_DONE returned if one of the following conditions is true.
+ * i) When the causative address is from user-space and the exception
+ * is a valid one, i.e. not triggered as a result of lazy debug register
+ * switching
+ * ii) When there are more bits than trap<n> set in DR6 register (such
+ * as BD, BS or BT) indicating that more than one debug condition is
+ * met and requires some more action in do_debug().
+ *
+ * NOTIFY_STOP returned for all other cases
+ *
+ */
+static int __kprobes hw_breakpoint_handler(struct die_args *args)
+{
+	int i, cpu, rc = NOTIFY_STOP;
+	struct perf_event *bp;
+	unsigned long dr7, dr6;
+	unsigned long *dr6_p;
+
+	/* The DR6 value is pointed by args->err */
+	dr6_p = (unsigned long *)ERR_PTR(args->err);
+	dr6 = *dr6_p;
+
+	/* Do an early return if no trap bits are set in DR6 */
+	if ((dr6 & DR_TRAP_BITS) == 0)
+		return NOTIFY_DONE;
+
+	get_debugreg(dr7, 7);
+	/* Disable breakpoints during exception handling */
+	set_debugreg(0UL, 7);
+	/*
+	 * Assert that local interrupts are disabled
+	 * Reset the DRn bits in the virtualized register value.
+	 * The ptrace trigger routine will add in whatever is needed.
+	 */
+	current->thread.debugreg6 &= ~DR_TRAP_BITS;
+	cpu = get_cpu();
+
+	/* Handle all the breakpoints that were triggered */
+	for (i = 0; i < HBP_NUM; ++i) {
+		if (likely(!(dr6 & (DR_TRAP0 << i))))
+			continue;
+
+		/*
+		 * The counter may be concurrently released but that can only
+		 * occur from a call_rcu() path. We can then safely fetch
+		 * the breakpoint, use its callback, touch its counter
+		 * while we are in an rcu_read_lock() path.
+		 */
+		rcu_read_lock();
+
+		bp = per_cpu(bp_per_reg[i], cpu);
+		if (bp)
+			rc = NOTIFY_DONE;
+		/*
+		 * Reset the 'i'th TRAP bit in dr6 to denote completion of
+		 * exception handling
+		 */
+		(*dr6_p) &= ~(DR_TRAP0 << i);
+		/*
+		 * bp can be NULL due to lazy debug register switching
+		 * or due to concurrent perf counter removing.
+		 */
+		if (!bp) {
+			rcu_read_unlock();
+			break;
+		}
+
+		perf_bp_event(bp, args->regs);
+
+		rcu_read_unlock();
+	}
+	if (dr6 & (~DR_TRAP_BITS))
+		rc = NOTIFY_DONE;
+
+	set_debugreg(dr7, 7);
+	put_cpu();
+
+	return rc;
+}
+
+/*
+ * Handle debug exception notifications.
+ */
+int __kprobes hw_breakpoint_exceptions_notify(
+		struct notifier_block *unused, unsigned long val, void *data)
+{
+	if (val != DIE_DEBUG)
+		return NOTIFY_DONE;
+
+	return hw_breakpoint_handler(data);
+}
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+	/* TODO */
+}
+
+void hw_breakpoint_pmu_unthrottle(struct perf_event *bp)
+{
+	/* TODO */
+}
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 04bbd5278568..664bcb7384ac 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -18,7 +18,7 @@
 atomic_t irq_err_count;
 
 /* Function pointer for generic interrupt vector handling */
-void (*generic_interrupt_extension)(void) = NULL;
+void (*x86_platform_ipi_callback)(void) = NULL;
 
 /*
  * 'what should we do if we get a hw irq event on an illegal vector'.
@@ -72,10 +72,10 @@ static int show_other_interrupts(struct seq_file *p, int prec)
 		seq_printf(p, "%10u ", irq_stats(j)->apic_pending_irqs);
 	seq_printf(p, "  Performance pending work\n");
 #endif
-	if (generic_interrupt_extension) {
+	if (x86_platform_ipi_callback) {
 		seq_printf(p, "%*s: ", prec, "PLT");
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", irq_stats(j)->generic_irqs);
+			seq_printf(p, "%10u ", irq_stats(j)->x86_platform_ipis);
 		seq_printf(p, "  Platform interrupts\n");
 	}
 #ifdef CONFIG_SMP
@@ -92,17 +92,17 @@ static int show_other_interrupts(struct seq_file *p, int prec)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count);
 	seq_printf(p, "  TLB shootdowns\n");
 #endif
-#ifdef CONFIG_X86_MCE
+#ifdef CONFIG_X86_THERMAL_VECTOR
 	seq_printf(p, "%*s: ", prec, "TRM");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_thermal_count);
 	seq_printf(p, "  Thermal event interrupts\n");
-# ifdef CONFIG_X86_MCE_THRESHOLD
+#endif
+#ifdef CONFIG_X86_MCE_THRESHOLD
 	seq_printf(p, "%*s: ", prec, "THR");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_threshold_count);
 	seq_printf(p, "  Threshold APIC interrupts\n");
-# endif
 #endif
 #ifdef CONFIG_X86_MCE
 	seq_printf(p, "%*s: ", prec, "MCE");
@@ -187,18 +187,18 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
 	sum += irq_stats(cpu)->apic_perf_irqs;
 	sum += irq_stats(cpu)->apic_pending_irqs;
 #endif
-	if (generic_interrupt_extension)
-		sum += irq_stats(cpu)->generic_irqs;
+	if (x86_platform_ipi_callback)
+		sum += irq_stats(cpu)->x86_platform_ipis;
 #ifdef CONFIG_SMP
 	sum += irq_stats(cpu)->irq_resched_count;
 	sum += irq_stats(cpu)->irq_call_count;
 	sum += irq_stats(cpu)->irq_tlb_count;
 #endif
-#ifdef CONFIG_X86_MCE
+#ifdef CONFIG_X86_THERMAL_VECTOR
 	sum += irq_stats(cpu)->irq_thermal_count;
-# ifdef CONFIG_X86_MCE_THRESHOLD
+#endif
+#ifdef CONFIG_X86_MCE_THRESHOLD
 	sum += irq_stats(cpu)->irq_threshold_count;
-# endif
 #endif
 #ifdef CONFIG_X86_MCE
 	sum += per_cpu(mce_exception_count, cpu);
@@ -251,9 +251,9 @@ unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
 }
 
 /*
- * Handler for GENERIC_INTERRUPT_VECTOR.
+ * Handler for X86_PLATFORM_IPI_VECTOR.
  */
-void smp_generic_interrupt(struct pt_regs *regs)
+void smp_x86_platform_ipi(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
@@ -263,10 +263,10 @@ void smp_generic_interrupt(struct pt_regs *regs)
 
 	irq_enter();
 
-	inc_irq_stat(generic_irqs);
+	inc_irq_stat(x86_platform_ipis);
 
-	if (generic_interrupt_extension)
-		generic_interrupt_extension();
+	if (x86_platform_ipi_callback)
+		x86_platform_ipi_callback();
 
 	irq_exit();
 
@@ -274,3 +274,93 @@ void smp_generic_interrupt(struct pt_regs *regs)
 }
 
 EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq);
+
+#ifdef CONFIG_HOTPLUG_CPU
+/* A cpu has been removed from cpu_online_mask.  Reset irq affinities. */
+void fixup_irqs(void)
+{
+	unsigned int irq, vector;
+	static int warned;
+	struct irq_desc *desc;
+
+	for_each_irq_desc(irq, desc) {
+		int break_affinity = 0;
+		int set_affinity = 1;
+		const struct cpumask *affinity;
+
+		if (!desc)
+			continue;
+		if (irq == 2)
+			continue;
+
+		/* interrupt's are disabled at this point */
+		spin_lock(&desc->lock);
+
+		affinity = desc->affinity;
+		if (!irq_has_action(irq) ||
+		    cpumask_equal(affinity, cpu_online_mask)) {
+			spin_unlock(&desc->lock);
+			continue;
+		}
+
+		/*
+		 * Complete the irq move. This cpu is going down and for
+		 * non intr-remapping case, we can't wait till this interrupt
+		 * arrives at this cpu before completing the irq move.
+		 */
+		irq_force_complete_move(irq);
+
+		if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
+			break_affinity = 1;
+			affinity = cpu_all_mask;
+		}
+
+		if (!(desc->status & IRQ_MOVE_PCNTXT) && desc->chip->mask)
+			desc->chip->mask(irq);
+
+		if (desc->chip->set_affinity)
+			desc->chip->set_affinity(irq, affinity);
+		else if (!(warned++))
+			set_affinity = 0;
+
+		if (!(desc->status & IRQ_MOVE_PCNTXT) && desc->chip->unmask)
+			desc->chip->unmask(irq);
+
+		spin_unlock(&desc->lock);
+
+		if (break_affinity && set_affinity)
+			printk("Broke affinity for irq %i\n", irq);
+		else if (!set_affinity)
+			printk("Cannot set affinity for irq %i\n", irq);
+	}
+
+	/*
+	 * We can remove mdelay() and then send spuriuous interrupts to
+	 * new cpu targets for all the irqs that were handled previously by
+	 * this cpu. While it works, I have seen spurious interrupt messages
+	 * (nothing wrong but still...).
+	 *
+	 * So for now, retain mdelay(1) and check the IRR and then send those
+	 * interrupts to new targets as this cpu is already offlined...
+	 */
+	mdelay(1);
+
+	for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
+		unsigned int irr;
+
+		if (__get_cpu_var(vector_irq)[vector] < 0)
+			continue;
+
+		irr = apic_read(APIC_IRR + (vector / 32 * 0x10));
+		if (irr  & (1 << (vector % 32))) {
+			irq = __get_cpu_var(vector_irq)[vector];
+
+			desc = irq_to_desc(irq);
+			spin_lock(&desc->lock);
+			if (desc->chip->retrigger)
+				desc->chip->retrigger(irq);
+			spin_unlock(&desc->lock);
+		}
+	}
+}
+#endif
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 7d35d0fe2329..10709f29d166 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -211,48 +211,3 @@ bool handle_irq(unsigned irq, struct pt_regs *regs)
 
 	return true;
 }
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* A cpu has been removed from cpu_online_mask.  Reset irq affinities. */
-void fixup_irqs(void)
-{
-	unsigned int irq;
-	struct irq_desc *desc;
-
-	for_each_irq_desc(irq, desc) {
-		const struct cpumask *affinity;
-
-		if (!desc)
-			continue;
-		if (irq == 2)
-			continue;
-
-		affinity = desc->affinity;
-		if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
-			printk("Breaking affinity for irq %i\n", irq);
-			affinity = cpu_all_mask;
-		}
-		if (desc->chip->set_affinity)
-			desc->chip->set_affinity(irq, affinity);
-		else if (desc->action)
-			printk_once("Cannot set affinity for irq %i\n", irq);
-	}
-
-#if 0
-	barrier();
-	/* Ingo Molnar says: "after the IO-APIC masks have been redirected
-	   [note the nop - the interrupt-enable boundary on x86 is two
-	   instructions from sti] - to flush out pending hardirqs and
-	   IPIs. After this point nothing is supposed to reach this CPU." */
-	__asm__ __volatile__("sti; nop; cli");
-	barrier();
-#else
-	/* That doesn't seem sufficient.  Give it 1ms. */
-	local_irq_enable();
-	mdelay(1);
-	local_irq_disable();
-#endif
-}
-#endif
-
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 977d8b43a0dd..acf8fbf8fbda 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -62,64 +62,6 @@ bool handle_irq(unsigned irq, struct pt_regs *regs)
 	return true;
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
-/* A cpu has been removed from cpu_online_mask.  Reset irq affinities. */
-void fixup_irqs(void)
-{
-	unsigned int irq;
-	static int warned;
-	struct irq_desc *desc;
-
-	for_each_irq_desc(irq, desc) {
-		int break_affinity = 0;
-		int set_affinity = 1;
-		const struct cpumask *affinity;
-
-		if (!desc)
-			continue;
-		if (irq == 2)
-			continue;
-
-		/* interrupt's are disabled at this point */
-		spin_lock(&desc->lock);
-
-		affinity = desc->affinity;
-		if (!irq_has_action(irq) ||
-		    cpumask_equal(affinity, cpu_online_mask)) {
-			spin_unlock(&desc->lock);
-			continue;
-		}
-
-		if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
-			break_affinity = 1;
-			affinity = cpu_all_mask;
-		}
-
-		if (desc->chip->mask)
-			desc->chip->mask(irq);
-
-		if (desc->chip->set_affinity)
-			desc->chip->set_affinity(irq, affinity);
-		else if (!(warned++))
-			set_affinity = 0;
-
-		if (desc->chip->unmask)
-			desc->chip->unmask(irq);
-
-		spin_unlock(&desc->lock);
-
-		if (break_affinity && set_affinity)
-			printk("Broke affinity for irq %i\n", irq);
-		else if (!set_affinity)
-			printk("Cannot set affinity for irq %i\n", irq);
-	}
-
-	/* That doesn't seem sufficient.  Give it 1ms. */
-	local_irq_enable();
-	mdelay(1);
-	local_irq_disable();
-}
-#endif
 
 extern void call_softirq(void);
 
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 40f30773fb29..d5932226614f 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -200,8 +200,8 @@ static void __init apic_intr_init(void)
 	/* self generated IPI for local APIC timer */
 	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
 
-	/* generic IPI for platform specific use */
-	alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt);
+	/* IPI for X86 platform specific use */
+	alloc_intr_gate(X86_PLATFORM_IPI_VECTOR, x86_platform_ipi);
 
 	/* IPI vectors for APIC spurious and error interrupts */
 	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 8d82a77a3f3b..dd74fe7273b1 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -43,6 +43,7 @@
 #include <linux/smp.h>
 #include <linux/nmi.h>
 
+#include <asm/debugreg.h>
 #include <asm/apicdef.h>
 #include <asm/system.h>
 
@@ -85,10 +86,15 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs[GDB_DS]	= regs->ds;
 	gdb_regs[GDB_ES]	= regs->es;
 	gdb_regs[GDB_CS]	= regs->cs;
-	gdb_regs[GDB_SS]	= __KERNEL_DS;
 	gdb_regs[GDB_FS]	= 0xFFFF;
 	gdb_regs[GDB_GS]	= 0xFFFF;
-	gdb_regs[GDB_SP]	= (int)&regs->sp;
+	if (user_mode_vm(regs)) {
+		gdb_regs[GDB_SS] = regs->ss;
+		gdb_regs[GDB_SP] = regs->sp;
+	} else {
+		gdb_regs[GDB_SS] = __KERNEL_DS;
+		gdb_regs[GDB_SP] = kernel_stack_pointer(regs);
+	}
 #else
 	gdb_regs[GDB_R8]	= regs->r8;
 	gdb_regs[GDB_R9]	= regs->r9;
@@ -101,7 +107,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs32[GDB_PS]	= regs->flags;
 	gdb_regs32[GDB_CS]	= regs->cs;
 	gdb_regs32[GDB_SS]	= regs->ss;
-	gdb_regs[GDB_SP]	= regs->sp;
+	gdb_regs[GDB_SP]	= kernel_stack_pointer(regs);
 #endif
 }
 
@@ -220,8 +226,7 @@ static void kgdb_correct_hw_break(void)
 			dr7 |= ((breakinfo[breakno].len << 2) |
 				 breakinfo[breakno].type) <<
 			       ((breakno << 2) + 16);
-			if (breakno >= 0 && breakno <= 3)
-				set_debugreg(breakinfo[breakno].addr, breakno);
+			set_debugreg(breakinfo[breakno].addr, breakno);
 
 		} else {
 			if ((dr7 & breakbit) && !breakinfo[breakno].enabled) {
@@ -395,7 +400,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
 		/* set the trace bit if we're stepping */
 		if (remcomInBuffer[0] == 's') {
 			linux_regs->flags |= X86_EFLAGS_TF;
-			kgdb_single_step = 1;
 			atomic_set(&kgdb_cpu_doing_single_step,
 				   raw_smp_processor_id());
 		}
@@ -434,6 +438,11 @@ single_step_cont(struct pt_regs *regs, struct die_args *args)
 			"resuming...\n");
 	kgdb_arch_handle_exception(args->trapnr, args->signr,
 				   args->err, "c", "", regs);
+	/*
+	 * Reset the BS bit in dr6 (pointed by args->err) to
+	 * denote completion of processing
+	 */
+	(*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
 
 	return NOTIFY_STOP;
 }
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 7b5169d2b000..5b8c7505b3bc 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -48,31 +48,22 @@
 #include <linux/preempt.h>
 #include <linux/module.h>
 #include <linux/kdebug.h>
+#include <linux/kallsyms.h>
 
 #include <asm/cacheflush.h>
 #include <asm/desc.h>
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
 #include <asm/alternative.h>
+#include <asm/insn.h>
+#include <asm/debugreg.h>
 
 void jprobe_return_end(void);
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 
-#ifdef CONFIG_X86_64
-#define stack_addr(regs) ((unsigned long *)regs->sp)
-#else
-/*
- * "&regs->sp" looks wrong, but it's correct for x86_32.  x86_32 CPUs
- * don't save the ss and esp registers if the CPU is already in kernel
- * mode when it traps.  So for kprobes, regs->sp and regs->ss are not
- * the [nonexistent] saved stack pointer and ss register, but rather
- * the top 8 bytes of the pre-int3 stack.  So &regs->sp happens to
- * point to the top of the pre-int3 stack.
- */
-#define stack_addr(regs) ((unsigned long *)&regs->sp)
-#endif
+#define stack_addr(regs) ((unsigned long *)kernel_stack_pointer(regs))
 
 #define W(row, b0, b1, b2, b3, b4, b5, b6, b7, b8, b9, ba, bb, bc, bd, be, bf)\
 	(((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) |   \
@@ -106,50 +97,6 @@ static const u32 twobyte_is_boostable[256 / 32] = {
 	/*      -----------------------------------------------         */
 	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f          */
 };
-static const u32 onebyte_has_modrm[256 / 32] = {
-	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f          */
-	/*      -----------------------------------------------         */
-	W(0x00, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* 00 */
-	W(0x10, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) , /* 10 */
-	W(0x20, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* 20 */
-	W(0x30, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) , /* 30 */
-	W(0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 40 */
-	W(0x50, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 50 */
-	W(0x60, 0, 0, 1, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0) | /* 60 */
-	W(0x70, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 70 */
-	W(0x80, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
-	W(0x90, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 90 */
-	W(0xa0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* a0 */
-	W(0xb0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* b0 */
-	W(0xc0, 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0) | /* c0 */
-	W(0xd0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
-	W(0xe0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* e0 */
-	W(0xf0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 1)   /* f0 */
-	/*      -----------------------------------------------         */
-	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f          */
-};
-static const u32 twobyte_has_modrm[256 / 32] = {
-	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f          */
-	/*      -----------------------------------------------         */
-	W(0x00, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1) | /* 0f */
-	W(0x10, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0) , /* 1f */
-	W(0x20, 1, 1, 1, 1, 1, 0, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1) | /* 2f */
-	W(0x30, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 3f */
-	W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 4f */
-	W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 5f */
-	W(0x60, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 6f */
-	W(0x70, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 1, 1, 1, 1) , /* 7f */
-	W(0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 8f */
-	W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 9f */
-	W(0xa0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1) | /* af */
-	W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1) , /* bf */
-	W(0xc0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0) | /* cf */
-	W(0xd0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* df */
-	W(0xe0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* ef */
-	W(0xf0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0)   /* ff */
-	/*      -----------------------------------------------         */
-	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f          */
-};
 #undef W
 
 struct kretprobe_blackpoint kretprobe_blacklist[] = {
@@ -244,6 +191,75 @@ retry:
 	}
 }
 
+/* Recover the probed instruction at addr for further analysis. */
+static int recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr)
+{
+	struct kprobe *kp;
+	kp = get_kprobe((void *)addr);
+	if (!kp)
+		return -EINVAL;
+
+	/*
+	 *  Basically, kp->ainsn.insn has an original instruction.
+	 *  However, RIP-relative instruction can not do single-stepping
+	 *  at different place, fix_riprel() tweaks the displacement of
+	 *  that instruction. In that case, we can't recover the instruction
+	 *  from the kp->ainsn.insn.
+	 *
+	 *  On the other hand, kp->opcode has a copy of the first byte of
+	 *  the probed instruction, which is overwritten by int3. And
+	 *  the instruction at kp->addr is not modified by kprobes except
+	 *  for the first byte, we can recover the original instruction
+	 *  from it and kp->opcode.
+	 */
+	memcpy(buf, kp->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+	buf[0] = kp->opcode;
+	return 0;
+}
+
+/* Dummy buffers for kallsyms_lookup */
+static char __dummy_buf[KSYM_NAME_LEN];
+
+/* Check if paddr is at an instruction boundary */
+static int __kprobes can_probe(unsigned long paddr)
+{
+	int ret;
+	unsigned long addr, offset = 0;
+	struct insn insn;
+	kprobe_opcode_t buf[MAX_INSN_SIZE];
+
+	if (!kallsyms_lookup(paddr, NULL, &offset, NULL, __dummy_buf))
+		return 0;
+
+	/* Decode instructions */
+	addr = paddr - offset;
+	while (addr < paddr) {
+		kernel_insn_init(&insn, (void *)addr);
+		insn_get_opcode(&insn);
+
+		/*
+		 * Check if the instruction has been modified by another
+		 * kprobe, in which case we replace the breakpoint by the
+		 * original instruction in our buffer.
+		 */
+		if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
+			ret = recover_probed_instruction(buf, addr);
+			if (ret)
+				/*
+				 * Another debugging subsystem might insert
+				 * this breakpoint. In that case, we can't
+				 * recover it.
+				 */
+				return 0;
+			kernel_insn_init(&insn, buf);
+		}
+		insn_get_length(&insn);
+		addr += insn.length;
+	}
+
+	return (addr == paddr);
+}
+
 /*
  * Returns non-zero if opcode modifies the interrupt flag.
  */
@@ -277,68 +293,30 @@ static int __kprobes is_IF_modifier(kprobe_opcode_t *insn)
 static void __kprobes fix_riprel(struct kprobe *p)
 {
 #ifdef CONFIG_X86_64
-	u8 *insn = p->ainsn.insn;
-	s64 disp;
-	int need_modrm;
-
-	/* Skip legacy instruction prefixes.  */
-	while (1) {
-		switch (*insn) {
-		case 0x66:
-		case 0x67:
-		case 0x2e:
-		case 0x3e:
-		case 0x26:
-		case 0x64:
-		case 0x65:
-		case 0x36:
-		case 0xf0:
-		case 0xf3:
-		case 0xf2:
-			++insn;
-			continue;
-		}
-		break;
-	}
+	struct insn insn;
+	kernel_insn_init(&insn, p->ainsn.insn);
 
-	/* Skip REX instruction prefix.  */
-	if (is_REX_prefix(insn))
-		++insn;
-
-	if (*insn == 0x0f) {
-		/* Two-byte opcode.  */
-		++insn;
-		need_modrm = test_bit(*insn,
-				      (unsigned long *)twobyte_has_modrm);
-	} else
-		/* One-byte opcode.  */
-		need_modrm = test_bit(*insn,
-				      (unsigned long *)onebyte_has_modrm);
-
-	if (need_modrm) {
-		u8 modrm = *++insn;
-		if ((modrm & 0xc7) == 0x05) {
-			/* %rip+disp32 addressing mode */
-			/* Displacement follows ModRM byte.  */
-			++insn;
-			/*
-			 * The copied instruction uses the %rip-relative
-			 * addressing mode.  Adjust the displacement for the
-			 * difference between the original location of this
-			 * instruction and the location of the copy that will
-			 * actually be run.  The tricky bit here is making sure
-			 * that the sign extension happens correctly in this
-			 * calculation, since we need a signed 32-bit result to
-			 * be sign-extended to 64 bits when it's added to the
-			 * %rip value and yield the same 64-bit result that the
-			 * sign-extension of the original signed 32-bit
-			 * displacement would have given.
-			 */
-			disp = (u8 *) p->addr + *((s32 *) insn) -
-			       (u8 *) p->ainsn.insn;
-			BUG_ON((s64) (s32) disp != disp); /* Sanity check.  */
-			*(s32 *)insn = (s32) disp;
-		}
+	if (insn_rip_relative(&insn)) {
+		s64 newdisp;
+		u8 *disp;
+		insn_get_displacement(&insn);
+		/*
+		 * The copied instruction uses the %rip-relative addressing
+		 * mode.  Adjust the displacement for the difference between
+		 * the original location of this instruction and the location
+		 * of the copy that will actually be run.  The tricky bit here
+		 * is making sure that the sign extension happens correctly in
+		 * this calculation, since we need a signed 32-bit result to
+		 * be sign-extended to 64 bits when it's added to the %rip
+		 * value and yield the same 64-bit result that the sign-
+		 * extension of the original signed 32-bit displacement would
+		 * have given.
+		 */
+		newdisp = (u8 *) p->addr + (s64) insn.displacement.value -
+			  (u8 *) p->ainsn.insn;
+		BUG_ON((s64) (s32) newdisp != newdisp); /* Sanity check.  */
+		disp = (u8 *) p->ainsn.insn + insn_offset_displacement(&insn);
+		*(s32 *) disp = (s32) newdisp;
 	}
 #endif
 }
@@ -359,6 +337,8 @@ static void __kprobes arch_copy_kprobe(struct kprobe *p)
 
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
+	if (!can_probe((unsigned long)p->addr))
+		return -EILSEQ;
 	/* insn: must be on special executable page on x86. */
 	p->ainsn.insn = get_insn_slot();
 	if (!p->ainsn.insn)
@@ -472,17 +452,6 @@ static int __kprobes reenter_kprobe(struct kprobe *p, struct pt_regs *regs,
 {
 	switch (kcb->kprobe_status) {
 	case KPROBE_HIT_SSDONE:
-#ifdef CONFIG_X86_64
-		/* TODO: Provide re-entrancy from post_kprobes_handler() and
-		 * avoid exception stack corruption while single-stepping on
-		 * the instruction of the new probe.
-		 */
-		arch_disarm_kprobe(p);
-		regs->ip = (unsigned long)p->addr;
-		reset_current_kprobe();
-		preempt_enable_no_resched();
-		break;
-#endif
 	case KPROBE_HIT_ACTIVE:
 		save_previous_kprobe(kcb);
 		set_current_kprobe(p, regs, kcb);
@@ -491,18 +460,16 @@ static int __kprobes reenter_kprobe(struct kprobe *p, struct pt_regs *regs,
 		kcb->kprobe_status = KPROBE_REENTER;
 		break;
 	case KPROBE_HIT_SS:
-		if (p == kprobe_running()) {
-			regs->flags &= ~X86_EFLAGS_TF;
-			regs->flags |= kcb->kprobe_saved_flags;
-			return 0;
-		} else {
-			/* A probe has been hit in the codepath leading up
-			 * to, or just after, single-stepping of a probed
-			 * instruction. This entire codepath should strictly
-			 * reside in .kprobes.text section. Raise a warning
-			 * to highlight this peculiar case.
-			 */
-		}
+		/* A probe has been hit in the codepath leading up to, or just
+		 * after, single-stepping of a probed instruction. This entire
+		 * codepath should strictly reside in .kprobes.text section.
+		 * Raise a BUG or we'll continue in an endless reentering loop
+		 * and eventually a stack overflow.
+		 */
+		printk(KERN_WARNING "Unrecoverable kprobe detected at %p.\n",
+		       p->addr);
+		dump_kprobe(p);
+		BUG();
 	default:
 		/* impossible cases */
 		WARN_ON(1);
@@ -514,7 +481,7 @@ static int __kprobes reenter_kprobe(struct kprobe *p, struct pt_regs *regs,
 
 /*
  * Interrupts are disabled on entry as trap3 is an interrupt gate and they
- * remain disabled thorough out this function.
+ * remain disabled throughout this function.
  */
 static int __kprobes kprobe_handler(struct pt_regs *regs)
 {
@@ -851,7 +818,7 @@ no_change:
 
 /*
  * Interrupts are disabled on entry as trap1 is an interrupt gate and they
- * remain disabled thoroughout this function.
+ * remain disabled throughout this function.
  */
 static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 {
@@ -967,8 +934,14 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 			ret = NOTIFY_STOP;
 		break;
 	case DIE_DEBUG:
-		if (post_kprobe_handler(args->regs))
+		if (post_kprobe_handler(args->regs)) {
+			/*
+			 * Reset the BS bit in dr6 (pointed by args->err) to
+			 * denote completion of processing
+			 */
+			(*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
 			ret = NOTIFY_STOP;
+		}
 		break;
 	case DIE_GPF:
 		/*
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index c1c429d00130..a3fa43ba5d3b 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -25,6 +25,7 @@
 #include <asm/desc.h>
 #include <asm/system.h>
 #include <asm/cacheflush.h>
+#include <asm/debugreg.h>
 
 static void set_idt(void *newidt, __u16 limit)
 {
@@ -157,8 +158,7 @@ int machine_kexec_prepare(struct kimage *image)
 {
 	int error;
 
-	if (nx_enabled)
-		set_pages_x(image->control_code_page, 1);
+	set_pages_x(image->control_code_page, 1);
 	error = machine_kexec_alloc_page_tables(image);
 	if (error)
 		return error;
@@ -172,8 +172,7 @@ int machine_kexec_prepare(struct kimage *image)
  */
 void machine_kexec_cleanup(struct kimage *image)
 {
-	if (nx_enabled)
-		set_pages_nx(image->control_code_page, 1);
+	set_pages_nx(image->control_code_page, 1);
 	machine_kexec_free_page_tables(image);
 }
 
@@ -202,6 +201,7 @@ void machine_kexec(struct kimage *image)
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
+	hw_breakpoint_disable();
 
 	if (image->preserve_context) {
 #ifdef CONFIG_X86_IO_APIC
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 84c3bf209e98..4a8bb82248ae 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -18,6 +18,7 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
+#include <asm/debugreg.h>
 
 static int init_one_level2_page(struct kimage *image, pgd_t *pgd,
 				unsigned long addr)
@@ -282,6 +283,7 @@ void machine_kexec(struct kimage *image)
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
+	hw_breakpoint_disable();
 
 	if (image->preserve_context) {
 #ifdef CONFIG_X86_IO_APIC
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index f4c538b681ca..37542b67c57e 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -13,6 +13,9 @@
  *  Licensed under the terms of the GNU General Public
  *  License version 2. See file COPYING for details.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/firmware.h>
 #include <linux/pci_ids.h>
 #include <linux/uaccess.h>
@@ -33,6 +36,9 @@ MODULE_LICENSE("GPL v2");
 #define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000
 #define UCODE_UCODE_TYPE           0x00000001
 
+const struct firmware *firmware;
+static int supported_cpu;
+
 struct equiv_cpu_entry {
 	u32	installed_cpu;
 	u32	fixed_errata_mask;
@@ -71,17 +77,14 @@ static struct equiv_cpu_entry *equiv_cpu_table;
 
 static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
 {
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	u32 dummy;
 
-	memset(csig, 0, sizeof(*csig));
-	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
-		printk(KERN_WARNING "microcode: CPU%d: AMD CPU family 0x%x not "
-		       "supported\n", cpu, c->x86);
+	if (!supported_cpu)
 		return -1;
-	}
+
+	memset(csig, 0, sizeof(*csig));
 	rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy);
-	printk(KERN_INFO "microcode: CPU%d: patch_level=0x%x\n", cpu, csig->rev);
+	pr_info("CPU%d: patch_level=0x%x\n", cpu, csig->rev);
 	return 0;
 }
 
@@ -103,23 +106,16 @@ static int get_matching_microcode(int cpu, void *mc, int rev)
 		i++;
 	}
 
-	if (!equiv_cpu_id) {
-		printk(KERN_WARNING "microcode: CPU%d: cpu revision "
-		       "not listed in equivalent cpu table\n", cpu);
+	if (!equiv_cpu_id)
 		return 0;
-	}
 
-	if (mc_header->processor_rev_id != equiv_cpu_id) {
-		printk(KERN_ERR	"microcode: CPU%d: patch mismatch "
-		       "(processor_rev_id: %x, equiv_cpu_id: %x)\n",
-		       cpu, mc_header->processor_rev_id, equiv_cpu_id);
+	if (mc_header->processor_rev_id != equiv_cpu_id)
 		return 0;
-	}
 
 	/* ucode might be chipset specific -- currently we don't support this */
 	if (mc_header->nb_dev_id || mc_header->sb_dev_id) {
-		printk(KERN_ERR "microcode: CPU%d: loading of chipset "
-		       "specific code not yet supported\n", cpu);
+		pr_err("CPU%d: loading of chipset specific code not yet supported\n",
+		       cpu);
 		return 0;
 	}
 
@@ -148,14 +144,12 @@ static int apply_microcode_amd(int cpu)
 
 	/* check current patch id and patch's id for match */
 	if (rev != mc_amd->hdr.patch_id) {
-		printk(KERN_ERR "microcode: CPU%d: update failed "
-		       "(for patch_level=0x%x)\n", cpu, mc_amd->hdr.patch_id);
+		pr_err("CPU%d: update failed (for patch_level=0x%x)\n",
+		       cpu, mc_amd->hdr.patch_id);
 		return -1;
 	}
 
-	printk(KERN_INFO "microcode: CPU%d: updated (new patch_level=0x%x)\n",
-	       cpu, rev);
-
+	pr_info("CPU%d: updated (new patch_level=0x%x)\n", cpu, rev);
 	uci->cpu_sig.rev = rev;
 
 	return 0;
@@ -178,18 +172,14 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size)
 		return NULL;
 
 	if (section_hdr[0] != UCODE_UCODE_TYPE) {
-		printk(KERN_ERR "microcode: error: invalid type field in "
-		       "container file section header\n");
+		pr_err("error: invalid type field in container file section header\n");
 		return NULL;
 	}
 
 	total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8));
 
-	printk(KERN_DEBUG "microcode: size %u, total_size %u\n",
-	       size, total_size);
-
 	if (total_size > size || total_size > UCODE_MAX_SIZE) {
-		printk(KERN_ERR "microcode: error: size mismatch\n");
+		pr_err("error: size mismatch\n");
 		return NULL;
 	}
 
@@ -218,15 +208,13 @@ static int install_equiv_cpu_table(const u8 *buf)
 	size = buf_pos[2];
 
 	if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) {
-		printk(KERN_ERR "microcode: error: invalid type field in "
-		       "container file section header\n");
+		pr_err("error: invalid type field in container file section header\n");
 		return 0;
 	}
 
 	equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
 	if (!equiv_cpu_table) {
-		printk(KERN_ERR "microcode: failed to allocate "
-		       "equivalent CPU table\n");
+		pr_err("failed to allocate equivalent CPU table\n");
 		return 0;
 	}
 
@@ -259,8 +247,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size)
 
 	offset = install_equiv_cpu_table(ucode_ptr);
 	if (!offset) {
-		printk(KERN_ERR "microcode: failed to create "
-		       "equivalent cpu table\n");
+		pr_err("failed to create equivalent cpu table\n");
 		return UCODE_ERROR;
 	}
 
@@ -291,8 +278,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size)
 		if (!leftover) {
 			vfree(uci->mc);
 			uci->mc = new_mc;
-			pr_debug("microcode: CPU%d found a matching microcode "
-				 "update with version 0x%x (current=0x%x)\n",
+			pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
 				 cpu, new_rev, uci->cpu_sig.rev);
 		} else {
 			vfree(new_mc);
@@ -308,33 +294,26 @@ generic_load_microcode(int cpu, const u8 *data, size_t size)
 
 static enum ucode_state request_microcode_fw(int cpu, struct device *device)
 {
-	const char *fw_name = "amd-ucode/microcode_amd.bin";
-	const struct firmware *firmware;
 	enum ucode_state ret;
 
-	if (request_firmware(&firmware, fw_name, device)) {
-		printk(KERN_ERR "microcode: failed to load file %s\n", fw_name);
+	if (firmware == NULL)
 		return UCODE_NFOUND;
-	}
 
 	if (*(u32 *)firmware->data != UCODE_MAGIC) {
-		printk(KERN_ERR "microcode: invalid UCODE_MAGIC (0x%08x)\n",
+		pr_err("invalid UCODE_MAGIC (0x%08x)\n",
 		       *(u32 *)firmware->data);
 		return UCODE_ERROR;
 	}
 
 	ret = generic_load_microcode(cpu, firmware->data, firmware->size);
 
-	release_firmware(firmware);
-
 	return ret;
 }
 
 static enum ucode_state
 request_microcode_user(int cpu, const void __user *buf, size_t size)
 {
-	printk(KERN_INFO "microcode: AMD microcode update via "
-	       "/dev/cpu/microcode not supported\n");
+	pr_info("AMD microcode update via /dev/cpu/microcode not supported\n");
 	return UCODE_ERROR;
 }
 
@@ -346,7 +325,31 @@ static void microcode_fini_cpu_amd(int cpu)
 	uci->mc = NULL;
 }
 
+void init_microcode_amd(struct device *device)
+{
+	const char *fw_name = "amd-ucode/microcode_amd.bin";
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+
+	WARN_ON(c->x86_vendor != X86_VENDOR_AMD);
+
+	if (c->x86 < 0x10) {
+		pr_warning("AMD CPU family 0x%x not supported\n", c->x86);
+		return;
+	}
+	supported_cpu = 1;
+
+	if (request_firmware(&firmware, fw_name, device))
+		pr_err("failed to load file %s\n", fw_name);
+}
+
+void fini_microcode_amd(void)
+{
+	release_firmware(firmware);
+}
+
 static struct microcode_ops microcode_amd_ops = {
+	.init				  = init_microcode_amd,
+	.fini				  = fini_microcode_amd,
 	.request_microcode_user           = request_microcode_user,
 	.request_microcode_fw             = request_microcode_fw,
 	.collect_cpu_info                 = collect_cpu_info_amd,
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 378e9a8f1bf8..844c02c65fcb 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -70,10 +70,12 @@
  *		Fix sigmatch() macro to handle old CPUs with pf == 0.
  *		Thanks to Stuart Swales for pointing out this bug.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/platform_device.h>
 #include <linux/miscdevice.h>
 #include <linux/capability.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -201,7 +203,6 @@ static int do_microcode_update(const void __user *buf, size_t size)
 
 static int microcode_open(struct inode *unused1, struct file *unused2)
 {
-	cycle_kernel_lock();
 	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
 }
 
@@ -211,7 +212,7 @@ static ssize_t microcode_write(struct file *file, const char __user *buf,
 	ssize_t ret = -EINVAL;
 
 	if ((len >> PAGE_SHIFT) > totalram_pages) {
-		pr_err("microcode: too much data (max %ld pages)\n", totalram_pages);
+		pr_err("too much data (max %ld pages)\n", totalram_pages);
 		return ret;
 	}
 
@@ -246,7 +247,7 @@ static int __init microcode_dev_init(void)
 
 	error = misc_register(&microcode_dev);
 	if (error) {
-		pr_err("microcode: can't misc_register on minor=%d\n", MICROCODE_MINOR);
+		pr_err("can't misc_register on minor=%d\n", MICROCODE_MINOR);
 		return error;
 	}
 
@@ -361,7 +362,7 @@ static enum ucode_state microcode_resume_cpu(int cpu)
 	if (!uci->mc)
 		return UCODE_NFOUND;
 
-	pr_debug("microcode: CPU%d updated upon resume\n", cpu);
+	pr_debug("CPU%d updated upon resume\n", cpu);
 	apply_microcode_on_target(cpu);
 
 	return UCODE_OK;
@@ -381,7 +382,7 @@ static enum ucode_state microcode_init_cpu(int cpu)
 	ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev);
 
 	if (ustate == UCODE_OK) {
-		pr_debug("microcode: CPU%d updated upon init\n", cpu);
+		pr_debug("CPU%d updated upon init\n", cpu);
 		apply_microcode_on_target(cpu);
 	}
 
@@ -393,7 +394,7 @@ static enum ucode_state microcode_update_cpu(int cpu)
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 	enum ucode_state ustate;
 
-	if (uci->valid)
+	if (uci->valid && uci->mc)
 		ustate = microcode_resume_cpu(cpu);
 	else
 		ustate = microcode_init_cpu(cpu);
@@ -408,7 +409,7 @@ static int mc_sysdev_add(struct sys_device *sys_dev)
 	if (!cpu_online(cpu))
 		return 0;
 
-	pr_debug("microcode: CPU%d added\n", cpu);
+	pr_debug("CPU%d added\n", cpu);
 
 	err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
 	if (err)
@@ -427,7 +428,7 @@ static int mc_sysdev_remove(struct sys_device *sys_dev)
 	if (!cpu_online(cpu))
 		return 0;
 
-	pr_debug("microcode: CPU%d removed\n", cpu);
+	pr_debug("CPU%d removed\n", cpu);
 	microcode_fini_cpu(cpu);
 	sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
 	return 0;
@@ -475,15 +476,15 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
 		microcode_update_cpu(cpu);
 	case CPU_DOWN_FAILED:
 	case CPU_DOWN_FAILED_FROZEN:
-		pr_debug("microcode: CPU%d added\n", cpu);
+		pr_debug("CPU%d added\n", cpu);
 		if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
-			pr_err("microcode: Failed to create group for CPU%d\n", cpu);
+			pr_err("Failed to create group for CPU%d\n", cpu);
 		break;
 	case CPU_DOWN_PREPARE:
 	case CPU_DOWN_PREPARE_FROZEN:
 		/* Suspend is in progress, only remove the interface */
 		sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
-		pr_debug("microcode: CPU%d removed\n", cpu);
+		pr_debug("CPU%d removed\n", cpu);
 		break;
 	case CPU_DEAD:
 	case CPU_UP_CANCELED_FROZEN:
@@ -509,7 +510,7 @@ static int __init microcode_init(void)
 		microcode_ops = init_amd_microcode();
 
 	if (!microcode_ops) {
-		pr_err("microcode: no support for this CPU vendor\n");
+		pr_err("no support for this CPU vendor\n");
 		return -ENODEV;
 	}
 
@@ -520,6 +521,9 @@ static int __init microcode_init(void)
 		return PTR_ERR(microcode_pdev);
 	}
 
+	if (microcode_ops->init)
+		microcode_ops->init(&microcode_pdev->dev);
+
 	get_online_cpus();
 	mutex_lock(&microcode_mutex);
 
@@ -540,8 +544,7 @@ static int __init microcode_init(void)
 	register_hotcpu_notifier(&mc_cpu_notifier);
 
 	pr_info("Microcode Update Driver: v" MICROCODE_VERSION
-	       " <tigran@aivazian.fsnet.co.uk>,"
-	       " Peter Oruba\n");
+		" <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n");
 
 	return 0;
 }
@@ -563,6 +566,9 @@ static void __exit microcode_exit(void)
 
 	platform_device_unregister(microcode_pdev);
 
+	if (microcode_ops->fini)
+		microcode_ops->fini();
+
 	microcode_ops = NULL;
 
 	pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index 0d334ddd0a96..ebd193e476ca 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -70,6 +70,9 @@
  *		Fix sigmatch() macro to handle old CPUs with pf == 0.
  *		Thanks to Stuart Swales for pointing out this bug.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/firmware.h>
 #include <linux/uaccess.h>
 #include <linux/kernel.h>
@@ -146,8 +149,7 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
 
 	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
 	    cpu_has(c, X86_FEATURE_IA64)) {
-		printk(KERN_ERR "microcode: CPU%d not a capable Intel "
-			"processor\n", cpu_num);
+		pr_err("CPU%d not a capable Intel processor\n", cpu_num);
 		return -1;
 	}
 
@@ -165,8 +167,8 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
 	/* get the current revision from MSR 0x8B */
 	rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
 
-	printk(KERN_INFO "microcode: CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n",
-			cpu_num, csig->sig, csig->pf, csig->rev);
+	pr_info("CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n",
+		cpu_num, csig->sig, csig->pf, csig->rev);
 
 	return 0;
 }
@@ -194,28 +196,24 @@ static int microcode_sanity_check(void *mc)
 	data_size = get_datasize(mc_header);
 
 	if (data_size + MC_HEADER_SIZE > total_size) {
-		printk(KERN_ERR "microcode: error! "
-				"Bad data size in microcode data file\n");
+		pr_err("error! Bad data size in microcode data file\n");
 		return -EINVAL;
 	}
 
 	if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
-		printk(KERN_ERR "microcode: error! "
-				"Unknown microcode update format\n");
+		pr_err("error! Unknown microcode update format\n");
 		return -EINVAL;
 	}
 	ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
 	if (ext_table_size) {
 		if ((ext_table_size < EXT_HEADER_SIZE)
 		 || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
-			printk(KERN_ERR "microcode: error! "
-				"Small exttable size in microcode data file\n");
+			pr_err("error! Small exttable size in microcode data file\n");
 			return -EINVAL;
 		}
 		ext_header = mc + MC_HEADER_SIZE + data_size;
 		if (ext_table_size != exttable_size(ext_header)) {
-			printk(KERN_ERR "microcode: error! "
-				"Bad exttable size in microcode data file\n");
+			pr_err("error! Bad exttable size in microcode data file\n");
 			return -EFAULT;
 		}
 		ext_sigcount = ext_header->count;
@@ -230,8 +228,7 @@ static int microcode_sanity_check(void *mc)
 		while (i--)
 			ext_table_sum += ext_tablep[i];
 		if (ext_table_sum) {
-			printk(KERN_WARNING "microcode: aborting, "
-				"bad extended signature table checksum\n");
+			pr_warning("aborting, bad extended signature table checksum\n");
 			return -EINVAL;
 		}
 	}
@@ -242,7 +239,7 @@ static int microcode_sanity_check(void *mc)
 	while (i--)
 		orig_sum += ((int *)mc)[i];
 	if (orig_sum) {
-		printk(KERN_ERR "microcode: aborting, bad checksum\n");
+		pr_err("aborting, bad checksum\n");
 		return -EINVAL;
 	}
 	if (!ext_table_size)
@@ -255,7 +252,7 @@ static int microcode_sanity_check(void *mc)
 			- (mc_header->sig + mc_header->pf + mc_header->cksum)
 			+ (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
 		if (sum) {
-			printk(KERN_ERR "microcode: aborting, bad checksum\n");
+			pr_err("aborting, bad checksum\n");
 			return -EINVAL;
 		}
 	}
@@ -327,13 +324,11 @@ static int apply_microcode(int cpu)
 	rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
 
 	if (val[1] != mc_intel->hdr.rev) {
-		printk(KERN_ERR "microcode: CPU%d update "
-				"to revision 0x%x failed\n",
-			cpu_num, mc_intel->hdr.rev);
+		pr_err("CPU%d update to revision 0x%x failed\n",
+		       cpu_num, mc_intel->hdr.rev);
 		return -1;
 	}
-	printk(KERN_INFO "microcode: CPU%d updated to revision "
-			 "0x%x, date = %04x-%02x-%02x \n",
+	pr_info("CPU%d updated to revision 0x%x, date = %04x-%02x-%02x \n",
 		cpu_num, val[1],
 		mc_intel->hdr.date & 0xffff,
 		mc_intel->hdr.date >> 24,
@@ -362,8 +357,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 
 		mc_size = get_totalsize(&mc_header);
 		if (!mc_size || mc_size > leftover) {
-			printk(KERN_ERR "microcode: error!"
-					"Bad data in microcode data file\n");
+			pr_err("error! Bad data in microcode data file\n");
 			break;
 		}
 
@@ -405,9 +399,8 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 		vfree(uci->mc);
 	uci->mc = (struct microcode_intel *)new_mc;
 
-	pr_debug("microcode: CPU%d found a matching microcode update with"
-		 " version 0x%x (current=0x%x)\n",
-			cpu, new_rev, uci->cpu_sig.rev);
+	pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
+		 cpu, new_rev, uci->cpu_sig.rev);
 out:
 	return state;
 }
@@ -429,7 +422,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device)
 		c->x86, c->x86_model, c->x86_mask);
 
 	if (request_firmware(&firmware, name, device)) {
-		pr_debug("microcode: data file %s load failed\n", name);
+		pr_debug("data file %s load failed\n", name);
 		return UCODE_NFOUND;
 	}
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 5be95ef4ffec..35a57c963df9 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -667,36 +667,18 @@ void __init default_get_smp_config(unsigned int early)
 	 */
 }
 
-static void __init smp_reserve_bootmem(struct mpf_intel *mpf)
+static void __init smp_reserve_memory(struct mpf_intel *mpf)
 {
 	unsigned long size = get_mpc_size(mpf->physptr);
-#ifdef CONFIG_X86_32
-	/*
-	 * We cannot access to MPC table to compute table size yet,
-	 * as only few megabytes from the bottom is mapped now.
-	 * PC-9800's MPC table places on the very last of physical
-	 * memory; so that simply reserving PAGE_SIZE from mpf->physptr
-	 * yields BUG() in reserve_bootmem.
-	 * also need to make sure physptr is below than max_low_pfn
-	 * we don't need reserve the area above max_low_pfn
-	 */
-	unsigned long end = max_low_pfn * PAGE_SIZE;
 
-	if (mpf->physptr < end) {
-		if (mpf->physptr + size > end)
-			size = end - mpf->physptr;
-		reserve_bootmem_generic(mpf->physptr, size, BOOTMEM_DEFAULT);
-	}
-#else
-	reserve_bootmem_generic(mpf->physptr, size, BOOTMEM_DEFAULT);
-#endif
+	reserve_early(mpf->physptr, mpf->physptr+size, "MP-table mpc");
 }
 
-static int __init smp_scan_config(unsigned long base, unsigned long length,
-				  unsigned reserve)
+static int __init smp_scan_config(unsigned long base, unsigned long length)
 {
 	unsigned int *bp = phys_to_virt(base);
 	struct mpf_intel *mpf;
+	unsigned long mem;
 
 	apic_printk(APIC_VERBOSE, "Scan SMP from %p for %ld bytes.\n",
 			bp, length);
@@ -717,12 +699,10 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 			printk(KERN_INFO "found SMP MP-table at [%p] %llx\n",
 			       mpf, (u64)virt_to_phys(mpf));
 
-			if (!reserve)
-				return 1;
-			reserve_bootmem_generic(virt_to_phys(mpf), sizeof(*mpf),
-						BOOTMEM_DEFAULT);
+			mem = virt_to_phys(mpf);
+			reserve_early(mem, mem + sizeof(*mpf), "MP-table mpf");
 			if (mpf->physptr)
-				smp_reserve_bootmem(mpf);
+				smp_reserve_memory(mpf);
 
 			return 1;
 		}
@@ -732,7 +712,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	return 0;
 }
 
-void __init default_find_smp_config(unsigned int reserve)
+void __init default_find_smp_config(void)
 {
 	unsigned int address;
 
@@ -744,9 +724,9 @@ void __init default_find_smp_config(unsigned int reserve)
 	 * 2) Scan the top 1K of base RAM
 	 * 3) Scan the 64K of bios
 	 */
-	if (smp_scan_config(0x0, 0x400, reserve) ||
-	    smp_scan_config(639 * 0x400, 0x400, reserve) ||
-	    smp_scan_config(0xF0000, 0x10000, reserve))
+	if (smp_scan_config(0x0, 0x400) ||
+	    smp_scan_config(639 * 0x400, 0x400) ||
+	    smp_scan_config(0xF0000, 0x10000))
 		return;
 	/*
 	 * If it is an SMP machine we should know now, unless the
@@ -767,7 +747,7 @@ void __init default_find_smp_config(unsigned int reserve)
 
 	address = get_bios_ebda();
 	if (address)
-		smp_scan_config(address, 0x400, reserve);
+		smp_scan_config(address, 0x400);
 }
 
 #ifdef CONFIG_X86_IO_APIC
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 6a3cefc7dda1..553449951b84 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -174,21 +174,17 @@ static int msr_open(struct inode *inode, struct file *file)
 {
 	unsigned int cpu = iminor(file->f_path.dentry->d_inode);
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
-	int ret = 0;
 
-	lock_kernel();
 	cpu = iminor(file->f_path.dentry->d_inode);
 
-	if (cpu >= nr_cpu_ids || !cpu_online(cpu)) {
-		ret = -ENXIO;	/* No such CPU */
-		goto out;
-	}
+	if (cpu >= nr_cpu_ids || !cpu_online(cpu))
+		return -ENXIO;	/* No such CPU */
+
 	c = &cpu_data(cpu);
 	if (!cpu_has(c, X86_FEATURE_MSR))
-		ret = -EIO;	/* MSR not supported */
-out:
-	unlock_kernel();
-	return ret;
+		return -EIO;	/* MSR not supported */
+
+	return 0;
 }
 
 /*
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 971a3bec47a8..c563e4c8ff39 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -46,6 +46,7 @@
 #include <asm/dma.h>
 #include <asm/rio.h>
 #include <asm/bios_ebda.h>
+#include <asm/x86_init.h>
 
 #ifdef CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT
 int use_calgary __read_mostly = 1;
@@ -244,7 +245,7 @@ static unsigned long iommu_range_alloc(struct device *dev,
 			if (panic_on_overflow)
 				panic("Calgary: fix the allocator.\n");
 			else
-				return bad_dma_address;
+				return DMA_ERROR_CODE;
 		}
 	}
 
@@ -260,12 +261,15 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 			      void *vaddr, unsigned int npages, int direction)
 {
 	unsigned long entry;
-	dma_addr_t ret = bad_dma_address;
+	dma_addr_t ret;
 
 	entry = iommu_range_alloc(dev, tbl, npages);
 
-	if (unlikely(entry == bad_dma_address))
-		goto error;
+	if (unlikely(entry == DMA_ERROR_CODE)) {
+		printk(KERN_WARNING "Calgary: failed to allocate %u pages in "
+		       "iommu %p\n", npages, tbl);
+		return DMA_ERROR_CODE;
+	}
 
 	/* set the return dma address */
 	ret = (entry << PAGE_SHIFT) | ((unsigned long)vaddr & ~PAGE_MASK);
@@ -273,13 +277,7 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 	/* put the TCEs in the HW table */
 	tce_build(tbl, entry, npages, (unsigned long)vaddr & PAGE_MASK,
 		  direction);
-
 	return ret;
-
-error:
-	printk(KERN_WARNING "Calgary: failed to allocate %u pages in "
-	       "iommu %p\n", npages, tbl);
-	return bad_dma_address;
 }
 
 static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
@@ -290,8 +288,8 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 	unsigned long flags;
 
 	/* were we called with bad_dma_address? */
-	badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE);
-	if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) {
+	badend = DMA_ERROR_CODE + (EMERGENCY_PAGES * PAGE_SIZE);
+	if (unlikely((dma_addr >= DMA_ERROR_CODE) && (dma_addr < badend))) {
 		WARN(1, KERN_ERR "Calgary: driver tried unmapping bad DMA "
 		       "address 0x%Lx\n", dma_addr);
 		return;
@@ -318,13 +316,15 @@ static inline struct iommu_table *find_iommu_table(struct device *dev)
 
 	pdev = to_pci_dev(dev);
 
+	/* search up the device tree for an iommu */
 	pbus = pdev->bus;
-
-	/* is the device behind a bridge? Look for the root bus */
-	while (pbus->parent)
+	do {
+		tbl = pci_iommu(pbus);
+		if (tbl && tbl->it_busno == pbus->number)
+			break;
+		tbl = NULL;
 		pbus = pbus->parent;
-
-	tbl = pci_iommu(pbus);
+	} while (pbus);
 
 	BUG_ON(tbl && (tbl->it_busno != pbus->number));
 
@@ -373,7 +373,7 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
 		npages = iommu_num_pages(vaddr, s->length, PAGE_SIZE);
 
 		entry = iommu_range_alloc(dev, tbl, npages);
-		if (entry == bad_dma_address) {
+		if (entry == DMA_ERROR_CODE) {
 			/* makes sure unmap knows to stop */
 			s->dma_length = 0;
 			goto error;
@@ -391,7 +391,7 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
 error:
 	calgary_unmap_sg(dev, sg, nelems, dir, NULL);
 	for_each_sg(sg, s, nelems, i) {
-		sg->dma_address = bad_dma_address;
+		sg->dma_address = DMA_ERROR_CODE;
 		sg->dma_length = 0;
 	}
 	return 0;
@@ -446,7 +446,7 @@ static void* calgary_alloc_coherent(struct device *dev, size_t size,
 
 	/* set up tces to cover the allocated range */
 	mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
-	if (mapping == bad_dma_address)
+	if (mapping == DMA_ERROR_CODE)
 		goto free;
 	*dma_handle = mapping;
 	return ret;
@@ -727,7 +727,7 @@ static void __init calgary_reserve_regions(struct pci_dev *dev)
 	struct iommu_table *tbl = pci_iommu(dev->bus);
 
 	/* reserve EMERGENCY_PAGES from bad_dma_address and up */
-	iommu_range_reserve(tbl, bad_dma_address, EMERGENCY_PAGES);
+	iommu_range_reserve(tbl, DMA_ERROR_CODE, EMERGENCY_PAGES);
 
 	/* avoid the BIOS/VGA first 640KB-1MB region */
 	/* for CalIOC2 - avoid the entire first MB */
@@ -1344,6 +1344,23 @@ static void __init get_tce_space_from_tar(void)
 	return;
 }
 
+static int __init calgary_iommu_init(void)
+{
+	int ret;
+
+	/* ok, we're trying to use Calgary - let's roll */
+	printk(KERN_INFO "PCI-DMA: Using Calgary IOMMU\n");
+
+	ret = calgary_init();
+	if (ret) {
+		printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
+		       "falling back to no_iommu\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 void __init detect_calgary(void)
 {
 	int bus;
@@ -1357,7 +1374,7 @@ void __init detect_calgary(void)
 	 * if the user specified iommu=off or iommu=soft or we found
 	 * another HW IOMMU already, bail out.
 	 */
-	if (swiotlb || no_iommu || iommu_detected)
+	if (no_iommu || iommu_detected)
 		return;
 
 	if (!use_calgary)
@@ -1442,9 +1459,7 @@ void __init detect_calgary(void)
 		printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d\n",
 		       specified_table_size);
 
-		/* swiotlb for devices that aren't behind the Calgary. */
-		if (max_pfn > MAX_DMA32_PFN)
-			swiotlb = 1;
+		x86_init.iommu.iommu_init = calgary_iommu_init;
 	}
 	return;
 
@@ -1457,35 +1472,6 @@ cleanup:
 	}
 }
 
-int __init calgary_iommu_init(void)
-{
-	int ret;
-
-	if (no_iommu || (swiotlb && !calgary_detected))
-		return -ENODEV;
-
-	if (!calgary_detected)
-		return -ENODEV;
-
-	/* ok, we're trying to use Calgary - let's roll */
-	printk(KERN_INFO "PCI-DMA: Using Calgary IOMMU\n");
-
-	ret = calgary_init();
-	if (ret) {
-		printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
-		       "falling back to no_iommu\n", ret);
-		return ret;
-	}
-
-	force_iommu = 1;
-	bad_dma_address = 0x0;
-	/* dma_ops is set to swiotlb or nommu */
-	if (!dma_ops)
-		dma_ops = &nommu_dma_ops;
-
-	return 0;
-}
-
 static int __init calgary_parse_options(char *p)
 {
 	unsigned int bridge;
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index a6e804d16c35..afcc58b69c7c 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -11,10 +11,11 @@
 #include <asm/gart.h>
 #include <asm/calgary.h>
 #include <asm/amd_iommu.h>
+#include <asm/x86_init.h>
 
 static int forbid_dac __read_mostly;
 
-struct dma_map_ops *dma_ops;
+struct dma_map_ops *dma_ops = &nommu_dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
 static int iommu_sac_force __read_mostly;
@@ -42,9 +43,6 @@ int iommu_detected __read_mostly = 0;
  */
 int iommu_pass_through __read_mostly;
 
-dma_addr_t bad_dma_address __read_mostly = 0;
-EXPORT_SYMBOL(bad_dma_address);
-
 /* Dummy device used for NULL arguments (normally ISA). */
 struct device x86_dma_fallback_dev = {
 	.init_name = "fallback device",
@@ -126,20 +124,17 @@ void __init pci_iommu_alloc(void)
 	/* free the range so iommu could get some range less than 4G */
 	dma32_free_bootmem();
 #endif
+	if (pci_swiotlb_init())
+		return;
 
-	/*
-	 * The order of these functions is important for
-	 * fall-back/fail-over reasons
-	 */
 	gart_iommu_hole_init();
 
 	detect_calgary();
 
 	detect_intel_iommu();
 
+	/* needs to be called after gart_iommu_hole_init */
 	amd_iommu_detect();
-
-	pci_swiotlb_init();
 }
 
 void *dma_generic_alloc_coherent(struct device *dev, size_t size,
@@ -214,7 +209,7 @@ static __init int iommu_setup(char *p)
 		if (!strncmp(p, "allowdac", 8))
 			forbid_dac = 0;
 		if (!strncmp(p, "nodac", 5))
-			forbid_dac = -1;
+			forbid_dac = 1;
 		if (!strncmp(p, "usedac", 6)) {
 			forbid_dac = -1;
 			return 1;
@@ -289,25 +284,17 @@ static int __init pci_iommu_init(void)
 #ifdef CONFIG_PCI
 	dma_debug_add_bus(&pci_bus_type);
 #endif
+	x86_init.iommu.iommu_init();
 
-	calgary_iommu_init();
-
-	intel_iommu_init();
+	if (swiotlb) {
+		printk(KERN_INFO "PCI-DMA: "
+		       "Using software bounce buffering for IO (SWIOTLB)\n");
+		swiotlb_print_info();
+	} else
+		swiotlb_free();
 
-	amd_iommu_init();
-
-	gart_iommu_init();
-
-	no_iommu_init();
 	return 0;
 }
-
-void pci_iommu_shutdown(void)
-{
-	gart_iommu_shutdown();
-
-	amd_iommu_shutdown();
-}
 /* Must execute after PCI subsystem */
 rootfs_initcall(pci_iommu_init);
 
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index a7f1b64f86e0..e6a0d402f171 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -39,6 +39,7 @@
 #include <asm/swiotlb.h>
 #include <asm/dma.h>
 #include <asm/k8.h>
+#include <asm/x86_init.h>
 
 static unsigned long iommu_bus_base;	/* GART remapping area (physical) */
 static unsigned long iommu_size;	/* size of remapping area bytes */
@@ -46,6 +47,8 @@ static unsigned long iommu_pages;	/* .. and in pages */
 
 static u32 *iommu_gatt_base;		/* Remapping table */
 
+static dma_addr_t bad_dma_addr;
+
 /*
  * If this is disabled the IOMMU will use an optimized flushing strategy
  * of only flushing when an mapping is reused. With it true the GART is
@@ -92,7 +95,7 @@ static unsigned long alloc_iommu(struct device *dev, int size,
 
 	base_index = ALIGN(iommu_bus_base & dma_get_seg_boundary(dev),
 			   PAGE_SIZE) >> PAGE_SHIFT;
-	boundary_size = ALIGN((unsigned long long)dma_get_seg_boundary(dev) + 1,
+	boundary_size = ALIGN((u64)dma_get_seg_boundary(dev) + 1,
 			      PAGE_SIZE) >> PAGE_SHIFT;
 
 	spin_lock_irqsave(&iommu_bitmap_lock, flags);
@@ -216,7 +219,7 @@ static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
 		if (panic_on_overflow)
 			panic("dma_map_area overflow %lu bytes\n", size);
 		iommu_full(dev, size, dir);
-		return bad_dma_address;
+		return bad_dma_addr;
 	}
 
 	for (i = 0; i < npages; i++) {
@@ -294,7 +297,7 @@ static int dma_map_sg_nonforce(struct device *dev, struct scatterlist *sg,
 	int i;
 
 #ifdef CONFIG_IOMMU_DEBUG
-	printk(KERN_DEBUG "dma_map_sg overflow\n");
+	pr_debug("dma_map_sg overflow\n");
 #endif
 
 	for_each_sg(sg, s, nents, i) {
@@ -302,7 +305,7 @@ static int dma_map_sg_nonforce(struct device *dev, struct scatterlist *sg,
 
 		if (nonforced_iommu(dev, addr, s->length)) {
 			addr = dma_map_area(dev, addr, s->length, dir, 0);
-			if (addr == bad_dma_address) {
+			if (addr == bad_dma_addr) {
 				if (i > 0)
 					gart_unmap_sg(dev, sg, i, dir, NULL);
 				nents = 0;
@@ -389,12 +392,14 @@ static int gart_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	if (!dev)
 		dev = &x86_dma_fallback_dev;
 
-	out = 0;
-	start = 0;
-	start_sg = sgmap = sg;
-	seg_size = 0;
-	max_seg_size = dma_get_max_seg_size(dev);
-	ps = NULL; /* shut up gcc */
+	out		= 0;
+	start		= 0;
+	start_sg	= sg;
+	sgmap		= sg;
+	seg_size	= 0;
+	max_seg_size	= dma_get_max_seg_size(dev);
+	ps		= NULL; /* shut up gcc */
+
 	for_each_sg(sg, s, nents, i) {
 		dma_addr_t addr = sg_phys(s);
 
@@ -417,11 +422,12 @@ static int gart_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 						 sgmap, pages, need) < 0)
 					goto error;
 				out++;
-				seg_size = 0;
-				sgmap = sg_next(sgmap);
-				pages = 0;
-				start = i;
-				start_sg = s;
+
+				seg_size	= 0;
+				sgmap		= sg_next(sgmap);
+				pages		= 0;
+				start		= i;
+				start_sg	= s;
 			}
 		}
 
@@ -455,7 +461,7 @@ error:
 
 	iommu_full(dev, pages << PAGE_SHIFT, dir);
 	for_each_sg(sg, s, nents, i)
-		s->dma_address = bad_dma_address;
+		s->dma_address = bad_dma_addr;
 	return 0;
 }
 
@@ -479,7 +485,7 @@ gart_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_addr,
 				     DMA_BIDIRECTIONAL, align_mask);
 
 		flush_gart();
-		if (paddr != bad_dma_address) {
+		if (paddr != bad_dma_addr) {
 			*dma_addr = paddr;
 			return page_address(page);
 		}
@@ -499,6 +505,11 @@ gart_free_coherent(struct device *dev, size_t size, void *vaddr,
 	free_pages((unsigned long)vaddr, get_order(size));
 }
 
+static int gart_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return (dma_addr == bad_dma_addr);
+}
+
 static int no_agp;
 
 static __init unsigned long check_iommu_size(unsigned long aper, u64 aper_size)
@@ -515,7 +526,7 @@ static __init unsigned long check_iommu_size(unsigned long aper, u64 aper_size)
 	iommu_size -= round_up(a, PMD_PAGE_SIZE) - a;
 
 	if (iommu_size < 64*1024*1024) {
-		printk(KERN_WARNING
+		pr_warning(
 			"PCI-DMA: Warning: Small IOMMU %luMB."
 			" Consider increasing the AGP aperture in BIOS\n",
 				iommu_size >> 20);
@@ -570,28 +581,32 @@ void set_up_gart_resume(u32 aper_order, u32 aper_alloc)
 	aperture_alloc = aper_alloc;
 }
 
-static int gart_resume(struct sys_device *dev)
+static void gart_fixup_northbridges(struct sys_device *dev)
 {
-	printk(KERN_INFO "PCI-DMA: Resuming GART IOMMU\n");
+	int i;
 
-	if (fix_up_north_bridges) {
-		int i;
+	if (!fix_up_north_bridges)
+		return;
 
-		printk(KERN_INFO "PCI-DMA: Restoring GART aperture settings\n");
+	pr_info("PCI-DMA: Restoring GART aperture settings\n");
 
-		for (i = 0; i < num_k8_northbridges; i++) {
-			struct pci_dev *dev = k8_northbridges[i];
+	for (i = 0; i < num_k8_northbridges; i++) {
+		struct pci_dev *dev = k8_northbridges[i];
 
-			/*
-			 * Don't enable translations just yet.  That is the next
-			 * step.  Restore the pre-suspend aperture settings.
-			 */
-			pci_write_config_dword(dev, AMD64_GARTAPERTURECTL,
-						aperture_order << 1);
-			pci_write_config_dword(dev, AMD64_GARTAPERTUREBASE,
-						aperture_alloc >> 25);
-		}
+		/*
+		 * Don't enable translations just yet.  That is the next
+		 * step.  Restore the pre-suspend aperture settings.
+		 */
+		pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, aperture_order << 1);
+		pci_write_config_dword(dev, AMD64_GARTAPERTUREBASE, aperture_alloc >> 25);
 	}
+}
+
+static int gart_resume(struct sys_device *dev)
+{
+	pr_info("PCI-DMA: Resuming GART IOMMU\n");
+
+	gart_fixup_northbridges(dev);
 
 	enable_gart_translations();
 
@@ -604,15 +619,14 @@ static int gart_suspend(struct sys_device *dev, pm_message_t state)
 }
 
 static struct sysdev_class gart_sysdev_class = {
-	.name = "gart",
-	.suspend = gart_suspend,
-	.resume = gart_resume,
+	.name		= "gart",
+	.suspend	= gart_suspend,
+	.resume		= gart_resume,
 
 };
 
 static struct sys_device device_gart = {
-	.id	= 0,
-	.cls	= &gart_sysdev_class,
+	.cls		= &gart_sysdev_class,
 };
 
 /*
@@ -627,7 +641,8 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	void *gatt;
 	int i, error;
 
-	printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
+	pr_info("PCI-DMA: Disabling AGP.\n");
+
 	aper_size = aper_base = info->aper_size = 0;
 	dev = NULL;
 	for (i = 0; i < num_k8_northbridges; i++) {
@@ -645,6 +660,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	}
 	if (!aper_base)
 		goto nommu;
+
 	info->aper_base = aper_base;
 	info->aper_size = aper_size >> 20;
 
@@ -667,14 +683,14 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
 	flush_gart();
 
-	printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
+	pr_info("PCI-DMA: aperture base @ %x size %u KB\n",
 	       aper_base, aper_size>>10);
 
 	return 0;
 
  nommu:
 	/* Should not happen anymore */
-	printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
+	pr_warning("PCI-DMA: More than 4GB of RAM and no IOMMU\n"
 	       "falling back to iommu=soft.\n");
 	return -1;
 }
@@ -686,14 +702,15 @@ static struct dma_map_ops gart_dma_ops = {
 	.unmap_page			= gart_unmap_page,
 	.alloc_coherent			= gart_alloc_coherent,
 	.free_coherent			= gart_free_coherent,
+	.mapping_error			= gart_mapping_error,
 };
 
-void gart_iommu_shutdown(void)
+static void gart_iommu_shutdown(void)
 {
 	struct pci_dev *dev;
 	int i;
 
-	if (no_agp && (dma_ops != &gart_dma_ops))
+	if (no_agp)
 		return;
 
 	for (i = 0; i < num_k8_northbridges; i++) {
@@ -708,7 +725,7 @@ void gart_iommu_shutdown(void)
 	}
 }
 
-void __init gart_iommu_init(void)
+int __init gart_iommu_init(void)
 {
 	struct agp_kern_info info;
 	unsigned long iommu_start;
@@ -718,7 +735,7 @@ void __init gart_iommu_init(void)
 	long i;
 
 	if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0)
-		return;
+		return 0;
 
 #ifndef CONFIG_AGP_AMD64
 	no_agp = 1;
@@ -730,35 +747,28 @@ void __init gart_iommu_init(void)
 		(agp_copy_info(agp_bridge, &info) < 0);
 #endif
 
-	if (swiotlb)
-		return;
-
-	/* Did we detect a different HW IOMMU? */
-	if (iommu_detected && !gart_iommu_aperture)
-		return;
-
 	if (no_iommu ||
 	    (!force_iommu && max_pfn <= MAX_DMA32_PFN) ||
 	    !gart_iommu_aperture ||
 	    (no_agp && init_k8_gatt(&info) < 0)) {
 		if (max_pfn > MAX_DMA32_PFN) {
-			printk(KERN_WARNING "More than 4GB of memory "
-			       "but GART IOMMU not available.\n");
-			printk(KERN_WARNING "falling back to iommu=soft.\n");
+			pr_warning("More than 4GB of memory but GART IOMMU not available.\n");
+			pr_warning("falling back to iommu=soft.\n");
 		}
-		return;
+		return 0;
 	}
 
 	/* need to map that range */
-	aper_size = info.aper_size << 20;
-	aper_base = info.aper_base;
-	end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
+	aper_size	= info.aper_size << 20;
+	aper_base	= info.aper_base;
+	end_pfn		= (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
+
 	if (end_pfn > max_low_pfn_mapped) {
 		start_pfn = (aper_base>>PAGE_SHIFT);
 		init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
 	}
 
-	printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n");
+	pr_info("PCI-DMA: using GART IOMMU.\n");
 	iommu_size = check_iommu_size(info.aper_base, aper_size);
 	iommu_pages = iommu_size >> PAGE_SHIFT;
 
@@ -773,8 +783,7 @@ void __init gart_iommu_init(void)
 
 		ret = dma_debug_resize_entries(iommu_pages);
 		if (ret)
-			printk(KERN_DEBUG
-			       "PCI-DMA: Cannot trace all the entries\n");
+			pr_debug("PCI-DMA: Cannot trace all the entries\n");
 	}
 #endif
 
@@ -784,15 +793,14 @@ void __init gart_iommu_init(void)
 	 */
 	iommu_area_reserve(iommu_gart_bitmap, 0, EMERGENCY_PAGES);
 
-	agp_memory_reserved = iommu_size;
-	printk(KERN_INFO
-	       "PCI-DMA: Reserving %luMB of IOMMU area in the AGP aperture\n",
+	pr_info("PCI-DMA: Reserving %luMB of IOMMU area in the AGP aperture\n",
 	       iommu_size >> 20);
 
-	iommu_start = aper_size - iommu_size;
-	iommu_bus_base = info.aper_base + iommu_start;
-	bad_dma_address = iommu_bus_base;
-	iommu_gatt_base = agp_gatt_table + (iommu_start>>PAGE_SHIFT);
+	agp_memory_reserved	= iommu_size;
+	iommu_start		= aper_size - iommu_size;
+	iommu_bus_base		= info.aper_base + iommu_start;
+	bad_dma_addr		= iommu_bus_base;
+	iommu_gatt_base		= agp_gatt_table + (iommu_start>>PAGE_SHIFT);
 
 	/*
 	 * Unmap the IOMMU part of the GART. The alias of the page is
@@ -814,7 +822,7 @@ void __init gart_iommu_init(void)
 	 * the pages as Not-Present:
 	 */
 	wbinvd();
-	
+
 	/*
 	 * Now all caches are flushed and we can safely enable
 	 * GART hardware.  Doing it early leaves the possibility
@@ -838,6 +846,10 @@ void __init gart_iommu_init(void)
 
 	flush_gart();
 	dma_ops = &gart_dma_ops;
+	x86_platform.iommu_shutdown = gart_iommu_shutdown;
+	swiotlb = 0;
+
+	return 0;
 }
 
 void __init gart_parse_options(char *p)
@@ -856,7 +868,7 @@ void __init gart_parse_options(char *p)
 #endif
 	if (isdigit(*p) && get_option(&p, &arg))
 		iommu_size = arg;
-	if (!strncmp(p, "fullflush", 8))
+	if (!strncmp(p, "fullflush", 9))
 		iommu_fullflush = 1;
 	if (!strncmp(p, "nofullflush", 11))
 		iommu_fullflush = 0;
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index a3933d4330cd..22be12b60a8f 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -33,7 +33,7 @@ static dma_addr_t nommu_map_page(struct device *dev, struct page *page,
 	dma_addr_t bus = page_to_phys(page) + offset;
 	WARN_ON(size == 0);
 	if (!check_addr("map_single", dev, bus, size))
-		return bad_dma_address;
+		return DMA_ERROR_CODE;
 	flush_write_buffers();
 	return bus;
 }
@@ -103,12 +103,3 @@ struct dma_map_ops nommu_dma_ops = {
 	.sync_sg_for_device	= nommu_sync_sg_for_device,
 	.is_phys		= 1,
 };
-
-void __init no_iommu_init(void)
-{
-	if (dma_ops)
-		return;
-
-	force_iommu = 0; /* no HW IOMMU */
-	dma_ops = &nommu_dma_ops;
-}
diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index aaa6b7839f1e..e3c0a66b9e77 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -42,18 +42,28 @@ static struct dma_map_ops swiotlb_dma_ops = {
 	.dma_supported = NULL,
 };
 
-void __init pci_swiotlb_init(void)
+/*
+ * pci_swiotlb_init - initialize swiotlb if necessary
+ *
+ * This returns non-zero if we are forced to use swiotlb (by the boot
+ * option).
+ */
+int __init pci_swiotlb_init(void)
 {
+	int use_swiotlb = swiotlb | swiotlb_force;
+
 	/* don't initialize swiotlb if iommu=off (no_iommu=1) */
 #ifdef CONFIG_X86_64
-	if ((!iommu_detected && !no_iommu && max_pfn > MAX_DMA32_PFN))
+	if (!no_iommu && max_pfn > MAX_DMA32_PFN)
 		swiotlb = 1;
 #endif
 	if (swiotlb_force)
 		swiotlb = 1;
+
 	if (swiotlb) {
-		printk(KERN_INFO "PCI-DMA: Using software bounce buffering for IO (SWIOTLB)\n");
-		swiotlb_init();
+		swiotlb_init(0);
 		dma_ops = &swiotlb_dma_ops;
 	}
+
+	return use_swiotlb;
 }
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 5284cd2b5776..7a7bd4e3ec49 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -9,7 +9,11 @@
 #include <linux/pm.h>
 #include <linux/clockchips.h>
 #include <linux/random.h>
+#include <linux/user-return-notifier.h>
+#include <linux/dmi.h>
+#include <linux/utsname.h>
 #include <trace/events/power.h>
+#include <linux/hw_breakpoint.h>
 #include <asm/system.h>
 #include <asm/apic.h>
 #include <asm/syscalls.h>
@@ -17,6 +21,7 @@
 #include <asm/uaccess.h>
 #include <asm/i387.h>
 #include <asm/ds.h>
+#include <asm/debugreg.h>
 
 unsigned long idle_halt;
 EXPORT_SYMBOL(idle_halt);
@@ -87,6 +92,25 @@ void exit_thread(void)
 	}
 }
 
+void show_regs_common(void)
+{
+	const char *board, *product;
+
+	board = dmi_get_system_info(DMI_BOARD_NAME);
+	if (!board)
+		board = "";
+	product = dmi_get_system_info(DMI_PRODUCT_NAME);
+	if (!product)
+		product = "";
+
+	printk("\n");
+	printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n",
+		current->pid, current->comm, print_tainted(),
+		init_utsname()->release,
+		(int)strcspn(init_utsname()->version, " "),
+		init_utsname()->version, board, product);
+}
+
 void flush_thread(void)
 {
 	struct task_struct *tsk = current;
@@ -103,14 +127,7 @@ void flush_thread(void)
 	}
 #endif
 
-	clear_tsk_thread_flag(tsk, TIF_DEBUG);
-
-	tsk->thread.debugreg0 = 0;
-	tsk->thread.debugreg1 = 0;
-	tsk->thread.debugreg2 = 0;
-	tsk->thread.debugreg3 = 0;
-	tsk->thread.debugreg6 = 0;
-	tsk->thread.debugreg7 = 0;
+	flush_ptrace_hw_breakpoint(tsk);
 	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
 	/*
 	 * Forget coprocessor state..
@@ -192,16 +209,6 @@ void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 	else if (next->debugctlmsr != prev->debugctlmsr)
 		update_debugctlmsr(next->debugctlmsr);
 
-	if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
-		set_debugreg(next->debugreg0, 0);
-		set_debugreg(next->debugreg1, 1);
-		set_debugreg(next->debugreg2, 2);
-		set_debugreg(next->debugreg3, 3);
-		/* no 4 and 5 */
-		set_debugreg(next->debugreg6, 6);
-		set_debugreg(next->debugreg7, 7);
-	}
-
 	if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^
 	    test_tsk_thread_flag(next_p, TIF_NOTSC)) {
 		/* prev and next are different */
@@ -224,6 +231,7 @@ void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 		 */
 		memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
 	}
+	propagate_user_return_notify(prev_p, next_p);
 }
 
 int sys_fork(struct pt_regs *regs)
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 4cf79567cdab..120b88797a75 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -23,7 +23,6 @@
 #include <linux/vmalloc.h>
 #include <linux/user.h>
 #include <linux/interrupt.h>
-#include <linux/utsname.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
@@ -35,7 +34,6 @@
 #include <linux/tick.h>
 #include <linux/percpu.h>
 #include <linux/prctl.h>
-#include <linux/dmi.h>
 #include <linux/ftrace.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
@@ -58,6 +56,7 @@
 #include <asm/idle.h>
 #include <asm/syscalls.h>
 #include <asm/ds.h>
+#include <asm/debugreg.h>
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
@@ -127,28 +126,18 @@ void __show_regs(struct pt_regs *regs, int all)
 	unsigned long d0, d1, d2, d3, d6, d7;
 	unsigned long sp;
 	unsigned short ss, gs;
-	const char *board;
 
 	if (user_mode_vm(regs)) {
 		sp = regs->sp;
 		ss = regs->ss & 0xffff;
 		gs = get_user_gs(regs);
 	} else {
-		sp = (unsigned long) (&regs->sp);
+		sp = kernel_stack_pointer(regs);
 		savesegment(ss, ss);
 		savesegment(gs, gs);
 	}
 
-	printk("\n");
-
-	board = dmi_get_system_info(DMI_PRODUCT_NAME);
-	if (!board)
-		board = "";
-	printk("Pid: %d, comm: %s %s (%s %.*s) %s\n",
-			task_pid_nr(current), current->comm,
-			print_tainted(), init_utsname()->release,
-			(int)strcspn(init_utsname()->version, " "),
-			init_utsname()->version, board);
+	show_regs_common();
 
 	printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
 			(u16)regs->cs, regs->ip, regs->flags,
@@ -187,7 +176,7 @@ void __show_regs(struct pt_regs *regs, int all)
 
 void show_regs(struct pt_regs *regs)
 {
-	__show_regs(regs, 1);
+	show_registers(regs);
 	show_trace(NULL, regs, &regs->sp, regs->bp);
 }
 
@@ -259,7 +248,12 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 
 	task_user_gs(p) = get_user_gs(regs);
 
+	p->thread.io_bitmap_ptr = NULL;
 	tsk = current;
+	err = -ENOMEM;
+
+	memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
+
 	if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
 		p->thread.io_bitmap_ptr = kmemdup(tsk->thread.io_bitmap_ptr,
 						IO_BITMAP_BYTES, GFP_KERNEL);
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index eb62cbcaa490..e5ab0cd0ef36 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -26,7 +26,6 @@
 #include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/interrupt.h>
-#include <linux/utsname.h>
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/ptrace.h>
@@ -38,7 +37,6 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <linux/ftrace.h>
-#include <linux/dmi.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -52,6 +50,7 @@
 #include <asm/idle.h>
 #include <asm/syscalls.h>
 #include <asm/ds.h>
+#include <asm/debugreg.h>
 
 asmlinkage extern void ret_from_fork(void);
 
@@ -162,18 +161,8 @@ void __show_regs(struct pt_regs *regs, int all)
 	unsigned long d0, d1, d2, d3, d6, d7;
 	unsigned int fsindex, gsindex;
 	unsigned int ds, cs, es;
-	const char *board;
-
-	printk("\n");
-	print_modules();
-	board = dmi_get_system_info(DMI_PRODUCT_NAME);
-	if (!board)
-		board = "";
-	printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s\n",
-		current->pid, current->comm, print_tainted(),
-		init_utsname()->release,
-		(int)strcspn(init_utsname()->version, " "),
-		init_utsname()->version, board);
+
+	show_regs_common();
 	printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip);
 	printk_address(regs->ip, 1);
 	printk(KERN_INFO "RSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss,
@@ -226,8 +215,7 @@ void __show_regs(struct pt_regs *regs, int all)
 
 void show_regs(struct pt_regs *regs)
 {
-	printk(KERN_INFO "CPU %d:", smp_processor_id());
-	__show_regs(regs, 1);
+	show_registers(regs);
 	show_trace(NULL, regs, (void *)(regs + 1), regs->bp);
 }
 
@@ -297,12 +285,16 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 
 	p->thread.fs = me->thread.fs;
 	p->thread.gs = me->thread.gs;
+	p->thread.io_bitmap_ptr = NULL;
 
 	savesegment(gs, p->thread.gsindex);
 	savesegment(fs, p->thread.fsindex);
 	savesegment(es, p->thread.es);
 	savesegment(ds, p->thread.ds);
 
+	err = -ENOMEM;
+	memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
+
 	if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) {
 		p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
 		if (!p->thread.io_bitmap_ptr) {
@@ -341,29 +333,46 @@ out:
 		kfree(p->thread.io_bitmap_ptr);
 		p->thread.io_bitmap_max = 0;
 	}
+
 	return err;
 }
 
-void
-start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
+static void
+start_thread_common(struct pt_regs *regs, unsigned long new_ip,
+		    unsigned long new_sp,
+		    unsigned int _cs, unsigned int _ss, unsigned int _ds)
 {
 	loadsegment(fs, 0);
-	loadsegment(es, 0);
-	loadsegment(ds, 0);
+	loadsegment(es, _ds);
+	loadsegment(ds, _ds);
 	load_gs_index(0);
 	regs->ip		= new_ip;
 	regs->sp		= new_sp;
 	percpu_write(old_rsp, new_sp);
-	regs->cs		= __USER_CS;
-	regs->ss		= __USER_DS;
-	regs->flags		= 0x200;
+	regs->cs		= _cs;
+	regs->ss		= _ss;
+	regs->flags		= X86_EFLAGS_IF;
 	set_fs(USER_DS);
 	/*
 	 * Free the old FP and other extended state
 	 */
 	free_thread_xstate(current);
 }
-EXPORT_SYMBOL_GPL(start_thread);
+
+void
+start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
+{
+	start_thread_common(regs, new_ip, new_sp,
+			    __USER_CS, __USER_DS, 0);
+}
+
+#ifdef CONFIG_IA32_EMULATION
+void start_thread_ia32(struct pt_regs *regs, u32 new_ip, u32 new_sp)
+{
+	start_thread_common(regs, new_ip, new_sp,
+			    __USER32_CS, __USER32_DS, __USER32_DS);
+}
+#endif
 
 /*
  *	switch_to(x,y) should switch tasks from x to y.
@@ -495,6 +504,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 */
 	if (preload_fpu)
 		__math_state_restore();
+
 	return prev_p;
 }
 
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 7b058a2dc66a..7079ddaf0731 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -22,6 +22,8 @@
 #include <linux/seccomp.h>
 #include <linux/signal.h>
 #include <linux/workqueue.h>
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -34,6 +36,7 @@
 #include <asm/prctl.h>
 #include <asm/proto.h>
 #include <asm/ds.h>
+#include <asm/hw_breakpoint.h>
 
 #include "tls.h"
 
@@ -49,6 +52,118 @@ enum x86_regset {
 	REGSET_IOPERM32,
 };
 
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+static const struct pt_regs_offset regoffset_table[] = {
+#ifdef CONFIG_X86_64
+	REG_OFFSET_NAME(r15),
+	REG_OFFSET_NAME(r14),
+	REG_OFFSET_NAME(r13),
+	REG_OFFSET_NAME(r12),
+	REG_OFFSET_NAME(r11),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r8),
+#endif
+	REG_OFFSET_NAME(bx),
+	REG_OFFSET_NAME(cx),
+	REG_OFFSET_NAME(dx),
+	REG_OFFSET_NAME(si),
+	REG_OFFSET_NAME(di),
+	REG_OFFSET_NAME(bp),
+	REG_OFFSET_NAME(ax),
+#ifdef CONFIG_X86_32
+	REG_OFFSET_NAME(ds),
+	REG_OFFSET_NAME(es),
+	REG_OFFSET_NAME(fs),
+	REG_OFFSET_NAME(gs),
+#endif
+	REG_OFFSET_NAME(orig_ax),
+	REG_OFFSET_NAME(ip),
+	REG_OFFSET_NAME(cs),
+	REG_OFFSET_NAME(flags),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(ss),
+	REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_query_register_name() - query register name from its offset
+ * @offset:	the offset of a register in struct pt_regs.
+ *
+ * regs_query_register_name() returns the name of a register from its
+ * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
+ */
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
+
+static const int arg_offs_table[] = {
+#ifdef CONFIG_X86_32
+	[0] = offsetof(struct pt_regs, ax),
+	[1] = offsetof(struct pt_regs, dx),
+	[2] = offsetof(struct pt_regs, cx)
+#else /* CONFIG_X86_64 */
+	[0] = offsetof(struct pt_regs, di),
+	[1] = offsetof(struct pt_regs, si),
+	[2] = offsetof(struct pt_regs, dx),
+	[3] = offsetof(struct pt_regs, cx),
+	[4] = offsetof(struct pt_regs, r8),
+	[5] = offsetof(struct pt_regs, r9)
+#endif
+};
+
+/**
+ * regs_get_argument_nth() - get Nth argument at function call
+ * @regs:	pt_regs which contains registers at function entry.
+ * @n:		argument number.
+ *
+ * regs_get_argument_nth() returns @n th argument of a function call.
+ * Since usually the kernel stack will be changed right after function entry,
+ * you must use this at function entry. If the @n th entry is NOT in the
+ * kernel stack or pt_regs, this returns 0.
+ */
+unsigned long regs_get_argument_nth(struct pt_regs *regs, unsigned int n)
+{
+	if (n < ARRAY_SIZE(arg_offs_table))
+		return *(unsigned long *)((char *)regs + arg_offs_table[n]);
+	else {
+		/*
+		 * The typical case: arg n is on the stack.
+		 * (Note: stack[0] = return address, so skip it)
+		 */
+		n -= ARRAY_SIZE(arg_offs_table);
+		return regs_get_kernel_stack_nth(regs, 1 + n);
+	}
+}
+
 /*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
@@ -137,11 +252,6 @@ static int set_segment_reg(struct task_struct *task,
 	return 0;
 }
 
-static unsigned long debugreg_addr_limit(struct task_struct *task)
-{
-	return TASK_SIZE - 3;
-}
-
 #else  /* CONFIG_X86_64 */
 
 #define FLAG_MASK		(FLAG_MASK_32 | X86_EFLAGS_NT)
@@ -266,15 +376,6 @@ static int set_segment_reg(struct task_struct *task,
 	return 0;
 }
 
-static unsigned long debugreg_addr_limit(struct task_struct *task)
-{
-#ifdef CONFIG_IA32_EMULATION
-	if (test_tsk_thread_flag(task, TIF_IA32))
-		return IA32_PAGE_OFFSET - 3;
-#endif
-	return TASK_SIZE_MAX - 7;
-}
-
 #endif	/* CONFIG_X86_32 */
 
 static unsigned long get_flags(struct task_struct *task)
@@ -454,99 +555,237 @@ static int genregs_set(struct task_struct *target,
 	return ret;
 }
 
+static void ptrace_triggered(struct perf_event *bp, int nmi,
+			     struct perf_sample_data *data,
+			     struct pt_regs *regs)
+{
+	int i;
+	struct thread_struct *thread = &(current->thread);
+
+	/*
+	 * Store in the virtual DR6 register the fact that the breakpoint
+	 * was hit so the thread's debugger will see it.
+	 */
+	for (i = 0; i < HBP_NUM; i++) {
+		if (thread->ptrace_bps[i] == bp)
+			break;
+	}
+
+	thread->debugreg6 |= (DR_TRAP0 << i);
+}
+
 /*
- * This function is trivial and will be inlined by the compiler.
- * Having it separates the implementation details of debug
- * registers from the interface details of ptrace.
+ * Walk through every ptrace breakpoints for this thread and
+ * build the dr7 value on top of their attributes.
+ *
  */
-static unsigned long ptrace_get_debugreg(struct task_struct *child, int n)
+static unsigned long ptrace_get_dr7(struct perf_event *bp[])
 {
-	switch (n) {
-	case 0:		return child->thread.debugreg0;
-	case 1:		return child->thread.debugreg1;
-	case 2:		return child->thread.debugreg2;
-	case 3:		return child->thread.debugreg3;
-	case 6:		return child->thread.debugreg6;
-	case 7:		return child->thread.debugreg7;
+	int i;
+	int dr7 = 0;
+	struct arch_hw_breakpoint *info;
+
+	for (i = 0; i < HBP_NUM; i++) {
+		if (bp[i] && !bp[i]->attr.disabled) {
+			info = counter_arch_bp(bp[i]);
+			dr7 |= encode_dr7(i, info->len, info->type);
+		}
 	}
-	return 0;
+
+	return dr7;
 }
 
-static int ptrace_set_debugreg(struct task_struct *child,
-			       int n, unsigned long data)
+static int
+ptrace_modify_breakpoint(struct perf_event *bp, int len, int type,
+			 struct task_struct *tsk, int disabled)
 {
-	int i;
+	int err;
+	int gen_len, gen_type;
+	struct perf_event_attr attr;
 
-	if (unlikely(n == 4 || n == 5))
-		return -EIO;
+	/*
+	 * We shoud have at least an inactive breakpoint at this
+	 * slot. It means the user is writing dr7 without having
+	 * written the address register first
+	 */
+	if (!bp)
+		return -EINVAL;
 
-	if (n < 4 && unlikely(data >= debugreg_addr_limit(child)))
-		return -EIO;
+	err = arch_bp_generic_fields(len, type, &gen_len, &gen_type);
+	if (err)
+		return err;
 
-	switch (n) {
-	case 0:		child->thread.debugreg0 = data; break;
-	case 1:		child->thread.debugreg1 = data; break;
-	case 2:		child->thread.debugreg2 = data; break;
-	case 3:		child->thread.debugreg3 = data; break;
+	attr = bp->attr;
+	attr.bp_len = gen_len;
+	attr.bp_type = gen_type;
+	attr.disabled = disabled;
 
-	case 6:
-		if ((data & ~0xffffffffUL) != 0)
-			return -EIO;
-		child->thread.debugreg6 = data;
-		break;
+	return modify_user_hw_breakpoint(bp, &attr);
+}
+
+/*
+ * Handle ptrace writes to debug register 7.
+ */
+static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	unsigned long old_dr7;
+	int i, orig_ret = 0, rc = 0;
+	int enabled, second_pass = 0;
+	unsigned len, type;
+	struct perf_event *bp;
+
+	data &= ~DR_CONTROL_RESERVED;
+	old_dr7 = ptrace_get_dr7(thread->ptrace_bps);
+restore:
+	/*
+	 * Loop through all the hardware breakpoints, making the
+	 * appropriate changes to each.
+	 */
+	for (i = 0; i < HBP_NUM; i++) {
+		enabled = decode_dr7(data, i, &len, &type);
+		bp = thread->ptrace_bps[i];
+
+		if (!enabled) {
+			if (bp) {
+				/*
+				 * Don't unregister the breakpoints right-away,
+				 * unless all register_user_hw_breakpoint()
+				 * requests have succeeded. This prevents
+				 * any window of opportunity for debug
+				 * register grabbing by other users.
+				 */
+				if (!second_pass)
+					continue;
+
+				rc = ptrace_modify_breakpoint(bp, len, type,
+							      tsk, 1);
+				if (rc)
+					break;
+			}
+			continue;
+		}
+
+		rc = ptrace_modify_breakpoint(bp, len, type, tsk, 0);
+		if (rc)
+			break;
+	}
+	/*
+	 * Make a second pass to free the remaining unused breakpoints
+	 * or to restore the original breakpoints if an error occurred.
+	 */
+	if (!second_pass) {
+		second_pass = 1;
+		if (rc < 0) {
+			orig_ret = rc;
+			data = old_dr7;
+		}
+		goto restore;
+	}
+	return ((orig_ret < 0) ? orig_ret : rc);
+}
+
+/*
+ * Handle PTRACE_PEEKUSR calls for the debug register area.
+ */
+static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	unsigned long val = 0;
+
+	if (n < HBP_NUM) {
+		struct perf_event *bp;
+		bp = thread->ptrace_bps[n];
+		if (!bp)
+			return 0;
+		val = bp->hw.info.address;
+	} else if (n == 6) {
+		val = thread->debugreg6;
+	 } else if (n == 7) {
+		val = ptrace_get_dr7(thread->ptrace_bps);
+	}
+	return val;
+}
 
-	case 7:
+static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
+				      unsigned long addr)
+{
+	struct perf_event *bp;
+	struct thread_struct *t = &tsk->thread;
+	struct perf_event_attr attr;
+
+	if (!t->ptrace_bps[nr]) {
+		hw_breakpoint_init(&attr);
 		/*
-		 * Sanity-check data. Take one half-byte at once with
-		 * check = (val >> (16 + 4*i)) & 0xf. It contains the
-		 * R/Wi and LENi bits; bits 0 and 1 are R/Wi, and bits
-		 * 2 and 3 are LENi. Given a list of invalid values,
-		 * we do mask |= 1 << invalid_value, so that
-		 * (mask >> check) & 1 is a correct test for invalid
-		 * values.
-		 *
-		 * R/Wi contains the type of the breakpoint /
-		 * watchpoint, LENi contains the length of the watched
-		 * data in the watchpoint case.
-		 *
-		 * The invalid values are:
-		 * - LENi == 0x10 (undefined), so mask |= 0x0f00.	[32-bit]
-		 * - R/Wi == 0x10 (break on I/O reads or writes), so
-		 *   mask |= 0x4444.
-		 * - R/Wi == 0x00 && LENi != 0x00, so we have mask |=
-		 *   0x1110.
-		 *
-		 * Finally, mask = 0x0f00 | 0x4444 | 0x1110 == 0x5f54.
-		 *
-		 * See the Intel Manual "System Programming Guide",
-		 * 15.2.4
-		 *
-		 * Note that LENi == 0x10 is defined on x86_64 in long
-		 * mode (i.e. even for 32-bit userspace software, but
-		 * 64-bit kernel), so the x86_64 mask value is 0x5454.
-		 * See the AMD manual no. 24593 (AMD64 System Programming)
+		 * Put stub len and type to register (reserve) an inactive but
+		 * correct bp
 		 */
-#ifdef CONFIG_X86_32
-#define	DR7_MASK	0x5f54
-#else
-#define	DR7_MASK	0x5554
-#endif
-		data &= ~DR_CONTROL_RESERVED;
-		for (i = 0; i < 4; i++)
-			if ((DR7_MASK >> ((data >> (16 + 4*i)) & 0xf)) & 1)
-				return -EIO;
-		child->thread.debugreg7 = data;
-		if (data)
-			set_tsk_thread_flag(child, TIF_DEBUG);
-		else
-			clear_tsk_thread_flag(child, TIF_DEBUG);
-		break;
+		attr.bp_addr = addr;
+		attr.bp_len = HW_BREAKPOINT_LEN_1;
+		attr.bp_type = HW_BREAKPOINT_W;
+		attr.disabled = 1;
+
+		bp = register_user_hw_breakpoint(&attr, ptrace_triggered, tsk);
+
+		/*
+		 * CHECKME: the previous code returned -EIO if the addr wasn't
+		 * a valid task virtual addr. The new one will return -EINVAL in
+		 *  this case.
+		 * -EINVAL may be what we want for in-kernel breakpoints users,
+		 * but -EIO looks better for ptrace, since we refuse a register
+		 * writing for the user. And anyway this is the previous
+		 * behaviour.
+		 */
+		if (IS_ERR(bp))
+			return PTR_ERR(bp);
+
+		t->ptrace_bps[nr] = bp;
+	} else {
+		int err;
+
+		bp = t->ptrace_bps[nr];
+
+		attr = bp->attr;
+		attr.bp_addr = addr;
+		err = modify_user_hw_breakpoint(bp, &attr);
+		if (err)
+			return err;
 	}
 
+
 	return 0;
 }
 
 /*
+ * Handle PTRACE_POKEUSR calls for the debug register area.
+ */
+int ptrace_set_debugreg(struct task_struct *tsk, int n, unsigned long val)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	int rc = 0;
+
+	/* There are no DR4 or DR5 registers */
+	if (n == 4 || n == 5)
+		return -EIO;
+
+	if (n == 6) {
+		thread->debugreg6 = val;
+		goto ret_path;
+	}
+	if (n < HBP_NUM) {
+		rc = ptrace_set_breakpoint_addr(tsk, n, val);
+		if (rc)
+			return rc;
+	}
+	/* All that's left is DR7 */
+	if (n == 7)
+		rc = ptrace_write_dr7(tsk, val);
+
+ret_path:
+	return rc;
+}
+
+/*
  * These access the current or another (stopped) task's io permission
  * bitmap for debugging or core dump.
  */
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 6c3b2c6fd772..18093d7498f0 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -499,6 +499,7 @@ static void __init quirk_amd_nb_node(struct pci_dev *dev)
 {
 	struct pci_dev *nb_ht;
 	unsigned int devfn;
+	u32 node;
 	u32 val;
 
 	devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
@@ -507,7 +508,13 @@ static void __init quirk_amd_nb_node(struct pci_dev *dev)
 		return;
 
 	pci_read_config_dword(nb_ht, 0x60, &val);
-	set_dev_node(&dev->dev, val & 7);
+	node = val & 7;
+	/*
+	 * Some hardware may return an invalid node ID,
+	 * so check it first:
+	 */
+	if (node_online(node))
+		set_dev_node(&dev->dev, node);
 	pci_dev_put(nb_ht);
 }
 
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index f93078746e00..1545bc0c9845 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -23,7 +23,7 @@
 # include <linux/ctype.h>
 # include <linux/mc146818rtc.h>
 #else
-# include <asm/iommu.h>
+# include <asm/x86_init.h>
 #endif
 
 /*
@@ -259,6 +259,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"),
 		},
 	},
+	{       /* Handle problems with rebooting on ASUS P4S800 */
+		.callback = set_bios_reboot,
+		.ident = "ASUS P4S800",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "P4S800"),
+		},
+	},
 	{ }
 };
 
@@ -622,7 +630,7 @@ void native_machine_shutdown(void)
 #endif
 
 #ifdef CONFIG_X86_64
-	pci_iommu_shutdown();
+	x86_platform.iommu_shutdown();
 #endif
 }
 
diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c
index 61a837743fe5..201eab63b05f 100644
--- a/arch/x86/kernel/reboot_fixups_32.c
+++ b/arch/x86/kernel/reboot_fixups_32.c
@@ -80,6 +80,7 @@ void mach_reboot_fixups(void)
 			continue;
 
 		cur->reboot_fixup(dev);
+		pci_dev_put(dev);
 	}
 }
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 2a34f9c5be21..946a311a25c9 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -106,9 +106,11 @@
 #include <asm/percpu.h>
 #include <asm/topology.h>
 #include <asm/apicdef.h>
+#include <asm/k8.h>
 #ifdef CONFIG_X86_64
 #include <asm/numa_64.h>
 #endif
+#include <asm/mce.h>
 
 /*
  * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
@@ -247,7 +249,7 @@ EXPORT_SYMBOL(edd);
  *              from boot_params into a safe place.
  *
  */
-static inline void copy_edd(void)
+static inline void __init copy_edd(void)
 {
      memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
 	    sizeof(edd.mbr_signature));
@@ -256,7 +258,7 @@ static inline void copy_edd(void)
      edd.edd_info_nr = boot_params.eddbuf_entries;
 }
 #else
-static inline void copy_edd(void)
+static inline void __init copy_edd(void)
 {
 }
 #endif
@@ -486,42 +488,11 @@ static void __init reserve_early_setup_data(void)
 
 #ifdef CONFIG_KEXEC
 
-/**
- * Reserve @size bytes of crashkernel memory at any suitable offset.
- *
- * @size: Size of the crashkernel memory to reserve.
- * Returns the base address on success, and -1ULL on failure.
- */
-static
-unsigned long long __init find_and_reserve_crashkernel(unsigned long long size)
-{
-	const unsigned long long alignment = 16<<20; 	/* 16M */
-	unsigned long long start = 0LL;
-
-	while (1) {
-		int ret;
-
-		start = find_e820_area(start, ULONG_MAX, size, alignment);
-		if (start == -1ULL)
-			return start;
-
-		/* try to reserve it */
-		ret = reserve_bootmem_generic(start, size, BOOTMEM_EXCLUSIVE);
-		if (ret >= 0)
-			return start;
-
-		start += alignment;
-	}
-}
-
 static inline unsigned long long get_total_mem(void)
 {
 	unsigned long long total;
 
-	total = max_low_pfn - min_low_pfn;
-#ifdef CONFIG_HIGHMEM
-	total += highend_pfn - highstart_pfn;
-#endif
+	total = max_pfn - min_low_pfn;
 
 	return total << PAGE_SHIFT;
 }
@@ -541,21 +512,25 @@ static void __init reserve_crashkernel(void)
 
 	/* 0 means: find the address automatically */
 	if (crash_base <= 0) {
-		crash_base = find_and_reserve_crashkernel(crash_size);
+		const unsigned long long alignment = 16<<20;	/* 16M */
+
+		crash_base = find_e820_area(alignment, ULONG_MAX, crash_size,
+				 alignment);
 		if (crash_base == -1ULL) {
-			pr_info("crashkernel reservation failed. "
-				"No suitable area found.\n");
+			pr_info("crashkernel reservation failed - No suitable area found.\n");
 			return;
 		}
 	} else {
-		ret = reserve_bootmem_generic(crash_base, crash_size,
-					BOOTMEM_EXCLUSIVE);
-		if (ret < 0) {
-			pr_info("crashkernel reservation failed - "
-				"memory is in use\n");
+		unsigned long long start;
+
+		start = find_e820_area(crash_base, ULONG_MAX, crash_size,
+				 1<<20);
+		if (start != crash_base) {
+			pr_info("crashkernel reservation failed - memory is in use.\n");
 			return;
 		}
 	}
+	reserve_early(crash_base, crash_base + crash_size, "CRASH KERNEL");
 
 	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
 			"for crashkernel (System RAM: %ldMB)\n",
@@ -698,6 +673,9 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
 
 void __init setup_arch(char **cmdline_p)
 {
+	int acpi = 0;
+	int k8 = 0;
+
 #ifdef CONFIG_X86_32
 	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
 	visws_early_detect();
@@ -790,21 +768,18 @@ void __init setup_arch(char **cmdline_p)
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
-#ifdef CONFIG_X86_64
 	/*
-	 * Must call this twice: Once just to detect whether hardware doesn't
-	 * support NX (so that the early EHCI debug console setup can safely
-	 * call set_fixmap(), and then again after parsing early parameters to
-	 * honor the respective command line option.
+	 * x86_configure_nx() is called before parse_early_param() to detect
+	 * whether hardware doesn't support NX (so that the early EHCI debug
+	 * console setup can safely call set_fixmap()). It may then be called
+	 * again from within noexec_setup() during parsing early parameters
+	 * to honor the respective command line option.
 	 */
-	check_efer();
-#endif
+	x86_configure_nx();
 
 	parse_early_param();
 
-#ifdef CONFIG_X86_64
-	check_efer();
-#endif
+	x86_report_nx();
 
 	/* Must be before kernel pagetables are setup */
 	vmi_activate();
@@ -900,6 +875,13 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_brk();
 
+#ifdef CONFIG_ACPI_SLEEP
+	/*
+	 * Reserve low memory region for sleep support.
+	 * even before init_memory_mapping
+	 */
+	acpi_reserve_wakeup_memory();
+#endif
 	init_gbpages();
 
 	/* max_pfn_mapped is updated here */
@@ -926,6 +908,8 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_initrd();
 
+	reserve_crashkernel();
+
 	vsmp_init();
 
 	io_delay_init();
@@ -937,27 +921,24 @@ void __init setup_arch(char **cmdline_p)
 
 	early_acpi_boot_init();
 
+	/*
+	 * Find and reserve possible boot-time SMP configuration:
+	 */
+	find_smp_config();
+
 #ifdef CONFIG_ACPI_NUMA
 	/*
 	 * Parse SRAT to discover nodes.
 	 */
-	acpi_numa_init();
+	acpi = acpi_numa_init();
 #endif
 
-	initmem_init(0, max_pfn);
-
-#ifdef CONFIG_ACPI_SLEEP
-	/*
-	 * Reserve low memory region for sleep support.
-	 */
-	acpi_reserve_bootmem();
+#ifdef CONFIG_K8_NUMA
+	if (!acpi)
+		k8 = !k8_numa_init(0, max_pfn);
 #endif
-	/*
-	 * Find and reserve possible boot-time SMP configuration:
-	 */
-	find_smp_config();
 
-	reserve_crashkernel();
+	initmem_init(0, max_pfn, acpi, k8);
 
 #ifdef CONFIG_X86_64
 	/*
@@ -1031,6 +1012,8 @@ void __init setup_arch(char **cmdline_p)
 #endif
 #endif
 	x86_init.oem.banner();
+
+	mcheck_init();
 }
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index d559af913e1f..35abcb8b00e9 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -20,9 +22,9 @@
 #include <asm/stackprotector.h>
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
-# define DBG(x...) printk(KERN_DEBUG x)
+# define DBG(fmt, ...) pr_dbg(fmt, ##__VA_ARGS__)
 #else
-# define DBG(x...)
+# define DBG(fmt, ...) do { if (0) pr_dbg(fmt, ##__VA_ARGS__); } while (0)
 #endif
 
 DEFINE_PER_CPU(int, cpu_number);
@@ -116,8 +118,8 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 	} else {
 		ptr = __alloc_bootmem_node_nopanic(NODE_DATA(node),
 						   size, align, goal);
-		pr_debug("per cpu data for cpu%d %lu bytes on node%d at "
-			 "%016lx\n", cpu, size, node, __pa(ptr));
+		pr_debug("per cpu data for cpu%d %lu bytes on node%d at %016lx\n",
+			 cpu, size, node, __pa(ptr));
 	}
 	return ptr;
 #else
@@ -198,8 +200,7 @@ void __init setup_per_cpu_areas(void)
 					    pcpu_cpu_distance,
 					    pcpu_fc_alloc, pcpu_fc_free);
 		if (rc < 0)
-			pr_warning("PERCPU: %s allocator failed (%d), "
-				   "falling back to page size\n",
+			pr_warning("%s allocator failed (%d), falling back to page size\n",
 				   pcpu_fc_names[pcpu_chosen_fc], rc);
 	}
 	if (rc < 0)
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 6a44a76055ad..74fe6d86dc5d 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -19,6 +19,7 @@
 #include <linux/stddef.h>
 #include <linux/personality.h>
 #include <linux/uaccess.h>
+#include <linux/user-return-notifier.h>
 
 #include <asm/processor.h>
 #include <asm/ucontext.h>
@@ -799,15 +800,6 @@ static void do_signal(struct pt_regs *regs)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		/*
-		 * Re-enable any watchpoints before delivering the
-		 * signal to user space. The processor register will
-		 * have been cleared if the watchpoint triggered
-		 * inside the kernel.
-		 */
-		if (current->thread.debugreg7)
-			set_debugreg(current->thread.debugreg7, 7);
-
 		/* Whee! Actually deliver the signal.  */
 		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
 			/*
@@ -872,6 +864,8 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 		if (current->replacement_session_keyring)
 			key_replace_session_keyring();
 	}
+	if (thread_info_flags & _TIF_USER_RETURN_NOTIFY)
+		fire_user_return_notifiers();
 
 #ifdef CONFIG_X86_32
 	clear_thread_flag(TIF_IRET);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 565ebc65920e..29e6744f51e3 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -687,7 +687,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 		.done	= COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
 	};
 
-	INIT_WORK(&c_idle.work, do_fork_idle);
+	INIT_WORK_ON_STACK(&c_idle.work, do_fork_idle);
 
 	alternatives_smp_switch(1);
 
@@ -713,6 +713,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 
 	if (IS_ERR(c_idle.idle)) {
 		printk("failed fork for CPU %d\n", cpu);
+		destroy_work_on_stack(&c_idle.work);
 		return PTR_ERR(c_idle.idle);
 	}
 
@@ -831,6 +832,7 @@ do_rest:
 		smpboot_restore_warm_reset_vector();
 	}
 
+	destroy_work_on_stack(&c_idle.work);
 	return boot_error;
 }
 
@@ -1250,16 +1252,7 @@ static void __ref remove_cpu_from_maps(int cpu)
 void cpu_disable_common(void)
 {
 	int cpu = smp_processor_id();
-	/*
-	 * HACK:
-	 * Allow any queued timer interrupts to get serviced
-	 * This is only a temporary solution until we cleanup
-	 * fixup_irqs as we do for IA64.
-	 */
-	local_irq_enable();
-	mdelay(1);
 
-	local_irq_disable();
 	remove_siblinginfo(cpu);
 
 	/* It's now safe to remove this processor from the online map */
diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c
index 1884a8d12bfa..dee1ff7cba58 100644
--- a/arch/x86/kernel/sys_i386_32.c
+++ b/arch/x86/kernel/sys_i386_32.c
@@ -24,31 +24,6 @@
 
 #include <asm/syscalls.h>
 
-asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
-			  unsigned long prot, unsigned long flags,
-			  unsigned long fd, unsigned long pgoff)
-{
-	int error = -EBADF;
-	struct file *file = NULL;
-	struct mm_struct *mm = current->mm;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
 /*
  * Perform the select(nd, in, out, ex, tv) and mmap() system
  * calls. Linux/i386 didn't use to be able to handle more than
@@ -77,7 +52,7 @@ asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
 	if (a.offset & ~PAGE_MASK)
 		goto out;
 
-	err = sys_mmap2(a.addr, a.len, a.prot, a.flags,
+	err = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags,
 			a.fd, a.offset >> PAGE_SHIFT);
 out:
 	return err;
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index 45e00eb09c3a..8aa2057efd12 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -23,26 +23,11 @@ SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
 		unsigned long, fd, unsigned long, off)
 {
 	long error;
-	struct file *file;
-
 	error = -EINVAL;
 	if (off & ~PAGE_MASK)
 		goto out;
 
-	error = -EBADF;
-	file = NULL;
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, off >> PAGE_SHIFT);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
+	error = sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT);
 out:
 	return error;
 }
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index 0157cd26d7cc..15228b5d3eb7 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -191,7 +191,7 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall	/* reserved for streams2 */
 	.long ptregs_vfork	/* 190 */
 	.long sys_getrlimit
-	.long sys_mmap2
+	.long sys_mmap_pgoff
 	.long sys_truncate64
 	.long sys_ftruncate64
 	.long sys_stat64	/* 195 */
@@ -336,3 +336,4 @@ ENTRY(sys_call_table)
 	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo	/* 335 */
 	.long sys_perf_event_open
+	.long sys_recvmmsg
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 1740c85e24bb..364d015efebc 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -817,10 +817,8 @@ static int __init uv_init_blade(int blade)
 	 */
 	apicid = blade_to_first_apicid(blade);
 	pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG);
-	if ((pa & 0xff) != UV_BAU_MESSAGE) {
-		uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
+	uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
 				      ((apicid << 32) | UV_BAU_MESSAGE));
-	}
 	return 0;
 }
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 7e37dcee0cc3..33399176512a 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -529,77 +529,56 @@ asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
 dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 {
 	struct task_struct *tsk = current;
-	unsigned long condition;
+	unsigned long dr6;
 	int si_code;
 
-	get_debugreg(condition, 6);
+	get_debugreg(dr6, 6);
 
 	/* Catch kmemcheck conditions first of all! */
-	if (condition & DR_STEP && kmemcheck_trap(regs))
+	if ((dr6 & DR_STEP) && kmemcheck_trap(regs))
 		return;
 
+	/* DR6 may or may not be cleared by the CPU */
+	set_debugreg(0, 6);
 	/*
 	 * The processor cleared BTF, so don't mark that we need it set.
 	 */
 	clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR);
 	tsk->thread.debugctlmsr = 0;
 
-	if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
-						SIGTRAP) == NOTIFY_STOP)
+	/* Store the virtualized DR6 value */
+	tsk->thread.debugreg6 = dr6;
+
+	if (notify_die(DIE_DEBUG, "debug", regs, PTR_ERR(&dr6), error_code,
+							SIGTRAP) == NOTIFY_STOP)
 		return;
 
 	/* It's safe to allow irq's after DR6 has been saved */
 	preempt_conditional_sti(regs);
 
-	/* Mask out spurious debug traps due to lazy DR7 setting */
-	if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
-		if (!tsk->thread.debugreg7)
-			goto clear_dr7;
+	if (regs->flags & X86_VM_MASK) {
+		handle_vm86_trap((struct kernel_vm86_regs *) regs,
+				error_code, 1);
+		return;
 	}
 
-#ifdef CONFIG_X86_32
-	if (regs->flags & X86_VM_MASK)
-		goto debug_vm86;
-#endif
-
-	/* Save debug status register where ptrace can see it */
-	tsk->thread.debugreg6 = condition;
-
 	/*
-	 * Single-stepping through TF: make sure we ignore any events in
-	 * kernel space (but re-enable TF when returning to user mode).
+	 * Single-stepping through system calls: ignore any exceptions in
+	 * kernel space, but re-enable TF when returning to user mode.
+	 *
+	 * We already checked v86 mode above, so we can check for kernel mode
+	 * by just checking the CPL of CS.
 	 */
-	if (condition & DR_STEP) {
-		if (!user_mode(regs))
-			goto clear_TF_reenable;
+	if ((dr6 & DR_STEP) && !user_mode(regs)) {
+		tsk->thread.debugreg6 &= ~DR_STEP;
+		set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
+		regs->flags &= ~X86_EFLAGS_TF;
 	}
-
-	si_code = get_si_code(condition);
-	/* Ok, finally something we can handle */
-	send_sigtrap(tsk, regs, error_code, si_code);
-
-	/*
-	 * Disable additional traps. They'll be re-enabled when
-	 * the signal is delivered.
-	 */
-clear_dr7:
-	set_debugreg(0, 7);
+	si_code = get_si_code(tsk->thread.debugreg6);
+	if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS))
+		send_sigtrap(tsk, regs, error_code, si_code);
 	preempt_conditional_cli(regs);
-	return;
 
-#ifdef CONFIG_X86_32
-debug_vm86:
-	/* reenable preemption: handle_vm86_trap() might sleep */
-	dec_preempt_count();
-	handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
-	conditional_cli(regs);
-	return;
-#endif
-
-clear_TF_reenable:
-	set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
-	regs->flags &= ~X86_EFLAGS_TF;
-	preempt_conditional_cli(regs);
 	return;
 }
 
diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index f37930954d15..eed156851f5d 100644
--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -114,13 +114,12 @@ void __cpuinit check_tsc_sync_source(int cpu)
 		return;
 
 	if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) {
-		printk_once(KERN_INFO "Skipping synchronization checks as TSC is reliable.\n");
+		if (cpu == (nr_cpu_ids-1) || system_state != SYSTEM_BOOTING)
+			pr_info(
+			"Skipped synchronization checks as TSC is reliable.\n");
 		return;
 	}
 
-	pr_info("checking TSC synchronization [CPU#%d -> CPU#%d]:",
-		smp_processor_id(), cpu);
-
 	/*
 	 * Reset it - in case this is a second bootup:
 	 */
@@ -142,12 +141,14 @@ void __cpuinit check_tsc_sync_source(int cpu)
 		cpu_relax();
 
 	if (nr_warps) {
-		printk("\n");
+		pr_warning("TSC synchronization [CPU#%d -> CPU#%d]:\n",
+			smp_processor_id(), cpu);
 		pr_warning("Measured %Ld cycles TSC warp between CPUs, "
 			   "turning off TSC clock.\n", max_warp);
 		mark_tsc_unstable("check_tsc_sync_source failed");
 	} else {
-		printk(" passed.\n");
+		pr_debug("TSC synchronization [CPU#%d -> CPU#%d]: passed\n",
+			smp_processor_id(), cpu);
 	}
 
 	/*
diff --git a/arch/x86/kernel/uv_irq.c b/arch/x86/kernel/uv_irq.c
index aeef529917e4..61d805df4c91 100644
--- a/arch/x86/kernel/uv_irq.c
+++ b/arch/x86/kernel/uv_irq.c
@@ -9,10 +9,25 @@
  */
 
 #include <linux/module.h>
+#include <linux/rbtree.h>
 #include <linux/irq.h>
 
 #include <asm/apic.h>
 #include <asm/uv/uv_irq.h>
+#include <asm/uv/uv_hub.h>
+
+/* MMR offset and pnode of hub sourcing interrupts for a given irq */
+struct uv_irq_2_mmr_pnode{
+	struct rb_node		list;
+	unsigned long		offset;
+	int			pnode;
+	int			irq;
+};
+
+static spinlock_t		uv_irq_lock;
+static struct rb_root		uv_irq_root;
+
+static int uv_set_irq_affinity(unsigned int, const struct cpumask *);
 
 static void uv_noop(unsigned int irq)
 {
@@ -39,25 +54,214 @@ struct irq_chip uv_irq_chip = {
 	.unmask		= uv_noop,
 	.eoi		= uv_ack_apic,
 	.end		= uv_noop,
+	.set_affinity	= uv_set_irq_affinity,
 };
 
 /*
+ * Add offset and pnode information of the hub sourcing interrupts to the
+ * rb tree for a specific irq.
+ */
+static int uv_set_irq_2_mmr_info(int irq, unsigned long offset, unsigned blade)
+{
+	struct rb_node **link = &uv_irq_root.rb_node;
+	struct rb_node *parent = NULL;
+	struct uv_irq_2_mmr_pnode *n;
+	struct uv_irq_2_mmr_pnode *e;
+	unsigned long irqflags;
+
+	n = kmalloc_node(sizeof(struct uv_irq_2_mmr_pnode), GFP_KERNEL,
+				uv_blade_to_memory_nid(blade));
+	if (!n)
+		return -ENOMEM;
+
+	n->irq = irq;
+	n->offset = offset;
+	n->pnode = uv_blade_to_pnode(blade);
+	spin_lock_irqsave(&uv_irq_lock, irqflags);
+	/* Find the right place in the rbtree: */
+	while (*link) {
+		parent = *link;
+		e = rb_entry(parent, struct uv_irq_2_mmr_pnode, list);
+
+		if (unlikely(irq == e->irq)) {
+			/* irq entry exists */
+			e->pnode = uv_blade_to_pnode(blade);
+			e->offset = offset;
+			spin_unlock_irqrestore(&uv_irq_lock, irqflags);
+			kfree(n);
+			return 0;
+		}
+
+		if (irq < e->irq)
+			link = &(*link)->rb_left;
+		else
+			link = &(*link)->rb_right;
+	}
+
+	/* Insert the node into the rbtree. */
+	rb_link_node(&n->list, parent, link);
+	rb_insert_color(&n->list, &uv_irq_root);
+
+	spin_unlock_irqrestore(&uv_irq_lock, irqflags);
+	return 0;
+}
+
+/* Retrieve offset and pnode information from the rb tree for a specific irq */
+int uv_irq_2_mmr_info(int irq, unsigned long *offset, int *pnode)
+{
+	struct uv_irq_2_mmr_pnode *e;
+	struct rb_node *n;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&uv_irq_lock, irqflags);
+	n = uv_irq_root.rb_node;
+	while (n) {
+		e = rb_entry(n, struct uv_irq_2_mmr_pnode, list);
+
+		if (e->irq == irq) {
+			*offset = e->offset;
+			*pnode = e->pnode;
+			spin_unlock_irqrestore(&uv_irq_lock, irqflags);
+			return 0;
+		}
+
+		if (irq < e->irq)
+			n = n->rb_left;
+		else
+			n = n->rb_right;
+	}
+	spin_unlock_irqrestore(&uv_irq_lock, irqflags);
+	return -1;
+}
+
+/*
+ * Re-target the irq to the specified CPU and enable the specified MMR located
+ * on the specified blade to allow the sending of MSIs to the specified CPU.
+ */
+static int
+arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
+		       unsigned long mmr_offset, int restrict)
+{
+	const struct cpumask *eligible_cpu = cpumask_of(cpu);
+	struct irq_desc *desc = irq_to_desc(irq);
+	struct irq_cfg *cfg;
+	int mmr_pnode;
+	unsigned long mmr_value;
+	struct uv_IO_APIC_route_entry *entry;
+	int err;
+
+	BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) !=
+			sizeof(unsigned long));
+
+	cfg = irq_cfg(irq);
+
+	err = assign_irq_vector(irq, cfg, eligible_cpu);
+	if (err != 0)
+		return err;
+
+	if (restrict == UV_AFFINITY_CPU)
+		desc->status |= IRQ_NO_BALANCING;
+	else
+		desc->status |= IRQ_MOVE_PCNTXT;
+
+	set_irq_chip_and_handler_name(irq, &uv_irq_chip, handle_percpu_irq,
+				      irq_name);
+
+	mmr_value = 0;
+	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
+	entry->vector		= cfg->vector;
+	entry->delivery_mode	= apic->irq_delivery_mode;
+	entry->dest_mode	= apic->irq_dest_mode;
+	entry->polarity		= 0;
+	entry->trigger		= 0;
+	entry->mask		= 0;
+	entry->dest		= apic->cpu_mask_to_apicid(eligible_cpu);
+
+	mmr_pnode = uv_blade_to_pnode(mmr_blade);
+	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+
+	if (cfg->move_in_progress)
+		send_cleanup_vector(cfg);
+
+	return irq;
+}
+
+/*
+ * Disable the specified MMR located on the specified blade so that MSIs are
+ * longer allowed to be sent.
+ */
+static void arch_disable_uv_irq(int mmr_pnode, unsigned long mmr_offset)
+{
+	unsigned long mmr_value;
+	struct uv_IO_APIC_route_entry *entry;
+
+	BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) !=
+			sizeof(unsigned long));
+
+	mmr_value = 0;
+	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
+	entry->mask = 1;
+
+	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+}
+
+static int uv_set_irq_affinity(unsigned int irq, const struct cpumask *mask)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	struct irq_cfg *cfg = desc->chip_data;
+	unsigned int dest;
+	unsigned long mmr_value;
+	struct uv_IO_APIC_route_entry *entry;
+	unsigned long mmr_offset;
+	unsigned mmr_pnode;
+
+	dest = set_desc_affinity(desc, mask);
+	if (dest == BAD_APICID)
+		return -1;
+
+	mmr_value = 0;
+	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
+
+	entry->vector		= cfg->vector;
+	entry->delivery_mode	= apic->irq_delivery_mode;
+	entry->dest_mode	= apic->irq_dest_mode;
+	entry->polarity		= 0;
+	entry->trigger		= 0;
+	entry->mask		= 0;
+	entry->dest		= dest;
+
+	/* Get previously stored MMR and pnode of hub sourcing interrupts */
+	if (uv_irq_2_mmr_info(irq, &mmr_offset, &mmr_pnode))
+		return -1;
+
+	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+
+	if (cfg->move_in_progress)
+		send_cleanup_vector(cfg);
+
+	return 0;
+}
+
+/*
  * Set up a mapping of an available irq and vector, and enable the specified
  * MMR that defines the MSI that is to be sent to the specified CPU when an
  * interrupt is raised.
  */
 int uv_setup_irq(char *irq_name, int cpu, int mmr_blade,
-		 unsigned long mmr_offset)
+		 unsigned long mmr_offset, int restrict)
 {
-	int irq;
-	int ret;
+	int irq, ret;
+
+	irq = create_irq_nr(NR_IRQS_LEGACY, uv_blade_to_memory_nid(mmr_blade));
 
-	irq = create_irq();
 	if (irq <= 0)
 		return -EBUSY;
 
-	ret = arch_enable_uv_irq(irq_name, irq, cpu, mmr_blade, mmr_offset);
-	if (ret != irq)
+	ret = arch_enable_uv_irq(irq_name, irq, cpu, mmr_blade, mmr_offset,
+		restrict);
+	if (ret == irq)
+		uv_set_irq_2_mmr_info(irq, mmr_offset, mmr_blade);
+	else
 		destroy_irq(irq);
 
 	return ret;
@@ -71,9 +275,28 @@ EXPORT_SYMBOL_GPL(uv_setup_irq);
  *
  * Set mmr_blade and mmr_offset to what was passed in on uv_setup_irq().
  */
-void uv_teardown_irq(unsigned int irq, int mmr_blade, unsigned long mmr_offset)
+void uv_teardown_irq(unsigned int irq)
 {
-	arch_disable_uv_irq(mmr_blade, mmr_offset);
+	struct uv_irq_2_mmr_pnode *e;
+	struct rb_node *n;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&uv_irq_lock, irqflags);
+	n = uv_irq_root.rb_node;
+	while (n) {
+		e = rb_entry(n, struct uv_irq_2_mmr_pnode, list);
+		if (e->irq == irq) {
+			arch_disable_uv_irq(e->pnode, e->offset);
+			rb_erase(n, &uv_irq_root);
+			kfree(e);
+			break;
+		}
+		if (irq < e->irq)
+			n = n->rb_left;
+		else
+			n = n->rb_right;
+	}
+	spin_unlock_irqrestore(&uv_irq_lock, irqflags);
 	destroy_irq(irq);
 }
 EXPORT_SYMBOL_GPL(uv_teardown_irq);
diff --git a/arch/x86/kernel/uv_time.c b/arch/x86/kernel/uv_time.c
index 583f11d5c480..3c84aa001c11 100644
--- a/arch/x86/kernel/uv_time.c
+++ b/arch/x86/kernel/uv_time.c
@@ -74,7 +74,7 @@ struct uv_rtc_timer_head {
  */
 static struct uv_rtc_timer_head		**blade_info __read_mostly;
 
-static int				uv_rtc_enable;
+static int				uv_rtc_evt_enable;
 
 /*
  * Hardware interface routines
@@ -90,7 +90,7 @@ static void uv_rtc_send_IPI(int cpu)
 	pnode = uv_apicid_to_pnode(apicid);
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	      (apicid << UVH_IPI_INT_APIC_ID_SHFT) |
-	      (GENERIC_INTERRUPT_VECTOR << UVH_IPI_INT_VECTOR_SHFT);
+	      (X86_PLATFORM_IPI_VECTOR << UVH_IPI_INT_VECTOR_SHFT);
 
 	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 }
@@ -115,7 +115,7 @@ static int uv_setup_intr(int cpu, u64 expires)
 	uv_write_global_mmr64(pnode, UVH_EVENT_OCCURRED0_ALIAS,
 		UVH_EVENT_OCCURRED0_RTC1_MASK);
 
-	val = (GENERIC_INTERRUPT_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) |
+	val = (X86_PLATFORM_IPI_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) |
 		((u64)cpu_physical_id(cpu) << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
 
 	/* Set configuration */
@@ -123,7 +123,10 @@ static int uv_setup_intr(int cpu, u64 expires)
 	/* Initialize comparator value */
 	uv_write_global_mmr64(pnode, UVH_INT_CMPB, expires);
 
-	return (expires < uv_read_rtc(NULL) && !uv_intr_pending(pnode));
+	if (uv_read_rtc(NULL) <= expires)
+		return 0;
+
+	return !uv_intr_pending(pnode);
 }
 
 /*
@@ -223,6 +226,7 @@ static int uv_rtc_set_timer(int cpu, u64 expires)
 
 	next_cpu = head->next_cpu;
 	*t = expires;
+
 	/* Will this one be next to go off? */
 	if (next_cpu < 0 || bcpu == next_cpu ||
 			expires < head->cpu[next_cpu].expires) {
@@ -231,7 +235,7 @@ static int uv_rtc_set_timer(int cpu, u64 expires)
 			*t = ULLONG_MAX;
 			uv_rtc_find_next_timer(head, pnode);
 			spin_unlock_irqrestore(&head->lock, flags);
-			return 1;
+			return -ETIME;
 		}
 	}
 
@@ -244,7 +248,7 @@ static int uv_rtc_set_timer(int cpu, u64 expires)
  *
  * Returns 1 if this timer was pending.
  */
-static int uv_rtc_unset_timer(int cpu)
+static int uv_rtc_unset_timer(int cpu, int force)
 {
 	int pnode = uv_cpu_to_pnode(cpu);
 	int bid = uv_cpu_to_blade_id(cpu);
@@ -256,14 +260,15 @@ static int uv_rtc_unset_timer(int cpu)
 
 	spin_lock_irqsave(&head->lock, flags);
 
-	if (head->next_cpu == bcpu && uv_read_rtc(NULL) >= *t)
+	if ((head->next_cpu == bcpu && uv_read_rtc(NULL) >= *t) || force)
 		rc = 1;
 
-	*t = ULLONG_MAX;
-
-	/* Was the hardware setup for this timer? */
-	if (head->next_cpu == bcpu)
-		uv_rtc_find_next_timer(head, pnode);
+	if (rc) {
+		*t = ULLONG_MAX;
+		/* Was the hardware setup for this timer? */
+		if (head->next_cpu == bcpu)
+			uv_rtc_find_next_timer(head, pnode);
+	}
 
 	spin_unlock_irqrestore(&head->lock, flags);
 
@@ -310,32 +315,32 @@ static void uv_rtc_timer_setup(enum clock_event_mode mode,
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		uv_rtc_unset_timer(ced_cpu);
+		uv_rtc_unset_timer(ced_cpu, 1);
 		break;
 	}
 }
 
 static void uv_rtc_interrupt(void)
 {
-	struct clock_event_device *ced = &__get_cpu_var(cpu_ced);
 	int cpu = smp_processor_id();
+	struct clock_event_device *ced = &per_cpu(cpu_ced, cpu);
 
 	if (!ced || !ced->event_handler)
 		return;
 
-	if (uv_rtc_unset_timer(cpu) != 1)
+	if (uv_rtc_unset_timer(cpu, 0) != 1)
 		return;
 
 	ced->event_handler(ced);
 }
 
-static int __init uv_enable_rtc(char *str)
+static int __init uv_enable_evt_rtc(char *str)
 {
-	uv_rtc_enable = 1;
+	uv_rtc_evt_enable = 1;
 
 	return 1;
 }
-__setup("uvrtc", uv_enable_rtc);
+__setup("uvrtcevt", uv_enable_evt_rtc);
 
 static __init void uv_rtc_register_clockevents(struct work_struct *dummy)
 {
@@ -350,27 +355,32 @@ static __init int uv_rtc_setup_clock(void)
 {
 	int rc;
 
-	if (!uv_rtc_enable || !is_uv_system() || generic_interrupt_extension)
+	if (!is_uv_system())
 		return -ENODEV;
 
-	generic_interrupt_extension = uv_rtc_interrupt;
-
 	clocksource_uv.mult = clocksource_hz2mult(sn_rtc_cycles_per_second,
 				clocksource_uv.shift);
 
+	/* If single blade, prefer tsc */
+	if (uv_num_possible_blades() == 1)
+		clocksource_uv.rating = 250;
+
 	rc = clocksource_register(&clocksource_uv);
-	if (rc) {
-		generic_interrupt_extension = NULL;
+	if (rc)
+		printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc);
+	else
+		printk(KERN_INFO "UV RTC clocksource registered freq %lu MHz\n",
+			sn_rtc_cycles_per_second/(unsigned long)1E6);
+
+	if (rc || !uv_rtc_evt_enable || x86_platform_ipi_callback)
 		return rc;
-	}
 
 	/* Setup and register clockevents */
 	rc = uv_rtc_allocate_timers();
-	if (rc) {
-		clocksource_unregister(&clocksource_uv);
-		generic_interrupt_extension = NULL;
-		return rc;
-	}
+	if (rc)
+		goto error;
+
+	x86_platform_ipi_callback = uv_rtc_interrupt;
 
 	clock_event_device_uv.mult = div_sc(sn_rtc_cycles_per_second,
 				NSEC_PER_SEC, clock_event_device_uv.shift);
@@ -383,11 +393,19 @@ static __init int uv_rtc_setup_clock(void)
 
 	rc = schedule_on_each_cpu(uv_rtc_register_clockevents);
 	if (rc) {
-		clocksource_unregister(&clocksource_uv);
-		generic_interrupt_extension = NULL;
+		x86_platform_ipi_callback = NULL;
 		uv_rtc_deallocate_timers();
+		goto error;
 	}
 
+	printk(KERN_INFO "UV RTC clockevents registered\n");
+
+	return 0;
+
+error:
+	clocksource_unregister(&clocksource_uv);
+	printk(KERN_INFO "UV RTC clockevents failed rc %d\n", rc);
+
 	return rc;
 }
 arch_initcall(uv_rtc_setup_clock);
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index f068553a1b17..34a279a7471d 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -183,7 +183,7 @@ static void __init MP_processor_info(struct mpc_cpu *m)
 		return;
 	}
 
-	apic_cpus = apic->apicid_to_cpu_present(m->apicid);
+	apic->apicid_to_cpu_present(m->apicid, &apic_cpus);
 	physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
 	/*
 	 * Validate version
@@ -197,7 +197,7 @@ static void __init MP_processor_info(struct mpc_cpu *m)
 	apic_version[m->apicid] = ver;
 }
 
-static void __init visws_find_smp_config(unsigned int reserve)
+static void __init visws_find_smp_config(void)
 {
 	struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS);
 	unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
@@ -486,7 +486,7 @@ static void end_cobalt_irq(unsigned int irq)
 }
 
 static struct irq_chip cobalt_irq_type = {
-	.typename =	"Cobalt-APIC",
+	.name =		"Cobalt-APIC",
 	.startup =	startup_cobalt_irq,
 	.shutdown =	disable_cobalt_irq,
 	.enable =	enable_cobalt_irq,
@@ -523,7 +523,7 @@ static void end_piix4_master_irq(unsigned int irq)
 }
 
 static struct irq_chip piix4_master_irq_type = {
-	.typename =	"PIIX4-master",
+	.name =		"PIIX4-master",
 	.startup =	startup_piix4_master_irq,
 	.ack =		ack_cobalt_irq,
 	.end =		end_piix4_master_irq,
@@ -531,7 +531,7 @@ static struct irq_chip piix4_master_irq_type = {
 
 
 static struct irq_chip piix4_virtual_irq_type = {
-	.typename =	"PIIX4-virtual",
+	.name =		"PIIX4-virtual",
 	.shutdown =	disable_8259A_irq,
 	.enable =	enable_8259A_irq,
 	.disable =	disable_8259A_irq,
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index 611b9e2360d3..74c92bb194df 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -226,7 +226,7 @@ static void __devinit vmi_time_init_clockevent(void)
 	evt->min_delta_ns = clockevent_delta2ns(1, evt);
 	evt->cpumask = cpumask_of(cpu);
 
-	printk(KERN_WARNING "vmi: registering clock event %s. mult=%lu shift=%u\n",
+	printk(KERN_WARNING "vmi: registering clock event %s. mult=%u shift=%u\n",
 	       evt->name, evt->mult, evt->shift);
 	clockevents_register_device(evt);
 }
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 3c68fe2d46cf..f3f2104408d9 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -41,6 +41,32 @@ ENTRY(phys_startup_64)
 jiffies_64 = jiffies;
 #endif
 
+#if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
+/*
+ * On 64-bit, align RODATA to 2MB so that even with CONFIG_DEBUG_RODATA
+ * we retain large page mappings for boundaries spanning kernel text, rodata
+ * and data sections.
+ *
+ * However, kernel identity mappings will have different RWX permissions
+ * to the pages mapping to text and to the pages padding (which are freed) the
+ * text section. Hence kernel identity mappings will be broken to smaller
+ * pages. For 64-bit, kernel text and kernel identity mappings are different,
+ * so we can enable protection checks that come with CONFIG_DEBUG_RODATA,
+ * as well as retain 2MB large page mappings for kernel text.
+ */
+#define X64_ALIGN_DEBUG_RODATA_BEGIN	. = ALIGN(HPAGE_SIZE);
+
+#define X64_ALIGN_DEBUG_RODATA_END				\
+		. = ALIGN(HPAGE_SIZE);				\
+		__end_rodata_hpage_align = .;
+
+#else
+
+#define X64_ALIGN_DEBUG_RODATA_BEGIN
+#define X64_ALIGN_DEBUG_RODATA_END
+
+#endif
+
 PHDRS {
 	text PT_LOAD FLAGS(5);          /* R_E */
 	data PT_LOAD FLAGS(7);          /* RWE */
@@ -90,7 +116,9 @@ SECTIONS
 
 	EXCEPTION_TABLE(16) :text = 0x9090
 
+	X64_ALIGN_DEBUG_RODATA_BEGIN
 	RO_DATA(PAGE_SIZE)
+	X64_ALIGN_DEBUG_RODATA_END
 
 	/* Data */
 	.data : AT(ADDR(.data) - LOAD_OFFSET) {
@@ -107,13 +135,13 @@ SECTIONS
 
 		PAGE_ALIGNED_DATA(PAGE_SIZE)
 
-		CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
+		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 
 		DATA_DATA
 		CONSTRUCTORS
 
 		/* rarely changed data like cpu maps */
-		READ_MOSTLY_DATA(CONFIG_X86_INTERNODE_CACHE_BYTES)
+		READ_MOSTLY_DATA(INTERNODE_CACHE_BYTES)
 
 		/* End of data section */
 		_edata = .;
@@ -137,12 +165,12 @@ SECTIONS
 		*(.vsyscall_0)
 	} :user
 
-	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+	. = ALIGN(L1_CACHE_BYTES);
 	.vsyscall_fn : AT(VLOAD(.vsyscall_fn)) {
 		*(.vsyscall_fn)
 	}
 
-	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+	. = ALIGN(L1_CACHE_BYTES);
 	.vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) {
 		*(.vsyscall_gtod_data)
 	}
@@ -166,7 +194,7 @@ SECTIONS
 	}
 	vgetcpu_mode = VVIRT(.vgetcpu_mode);
 
-	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+	. = ALIGN(L1_CACHE_BYTES);
 	.jiffies : AT(VLOAD(.jiffies)) {
 		*(.jiffies)
 	}
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 8cb4974ff599..9055e5872ff0 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -73,7 +73,8 @@ void update_vsyscall_tz(void)
 	write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags);
 }
 
-void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
+void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
+		     u32 mult)
 {
 	unsigned long flags;
 
@@ -82,7 +83,7 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
 	vsyscall_gtod_data.clock.vread = clock->vread;
 	vsyscall_gtod_data.clock.cycle_last = clock->cycle_last;
 	vsyscall_gtod_data.clock.mask = clock->mask;
-	vsyscall_gtod_data.clock.mult = clock->mult;
+	vsyscall_gtod_data.clock.mult = mult;
 	vsyscall_gtod_data.clock.shift = clock->shift;
 	vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec;
 	vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec;
@@ -237,7 +238,7 @@ static ctl_table kernel_table2[] = {
 };
 
 static ctl_table kernel_root_table2[] = {
-	{ .ctl_name = CTL_KERN, .procname = "kernel", .mode = 0555,
+	{ .procname = "kernel", .mode = 0555,
 	  .child = kernel_table2 },
 	{}
 };
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index 3909e3ba5ce3..a1029769b6f2 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -30,9 +30,8 @@ EXPORT_SYMBOL(__put_user_8);
 
 EXPORT_SYMBOL(copy_user_generic);
 EXPORT_SYMBOL(__copy_user_nocache);
-EXPORT_SYMBOL(copy_from_user);
-EXPORT_SYMBOL(copy_to_user);
-EXPORT_SYMBOL(__copy_from_user_inatomic);
+EXPORT_SYMBOL(_copy_from_user);
+EXPORT_SYMBOL(_copy_to_user);
 
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(clear_page);
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 4449a4a2c2ed..ccd179dec36e 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -13,11 +13,15 @@
 #include <asm/e820.h>
 #include <asm/time.h>
 #include <asm/irq.h>
+#include <asm/pat.h>
 #include <asm/tsc.h>
+#include <asm/iommu.h>
 
 void __cpuinit x86_init_noop(void) { }
 void __init x86_init_uint_noop(unsigned int unused) { }
 void __init x86_init_pgd_noop(pgd_t *unused) { }
+int __init iommu_init_noop(void) { return 0; }
+void iommu_shutdown_noop(void) { }
 
 /*
  * The platform setup functions are preset with the default functions
@@ -62,6 +66,10 @@ struct x86_init_ops x86_init __initdata = {
 		.tsc_pre_init		= x86_init_noop,
 		.timer_init		= hpet_time_init,
 	},
+
+	.iommu = {
+		.iommu_init		= iommu_init_noop,
+	},
 };
 
 struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
@@ -72,4 +80,6 @@ struct x86_platform_ops x86_platform = {
 	.calibrate_tsc			= native_calibrate_tsc,
 	.get_wallclock			= mach_get_cmos_time,
 	.set_wallclock			= mach_set_rtc_mmss,
+	.iommu_shutdown			= iommu_shutdown_noop,
+	.is_untracked_pat_range		= is_ISA_range,
 };
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index b84e571f4175..4cd498332466 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -28,6 +28,7 @@ config KVM
 	select HAVE_KVM_IRQCHIP
 	select HAVE_KVM_EVENTFD
 	select KVM_APIC_ARCHITECTURE
+	select USER_RETURN_NOTIFIER
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index 0e7fe78d0f74..31a7035c4bd9 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -6,7 +6,8 @@ CFLAGS_svm.o := -I.
 CFLAGS_vmx.o := -I.
 
 kvm-y			+= $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
-				coalesced_mmio.o irq_comm.o eventfd.o)
+				coalesced_mmio.o irq_comm.o eventfd.o \
+				assigned-dev.o)
 kvm-$(CONFIG_IOMMU_API)	+= $(addprefix ../../../virt/kvm/, iommu.o)
 
 kvm-y			+= x86.o mmu.o emulate.o i8259.o irq.o lapic.o \
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 1be5cd640e93..7e8faea4651e 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -75,6 +75,8 @@
 #define Group       (1<<14)     /* Bits 3:5 of modrm byte extend opcode */
 #define GroupDual   (1<<15)     /* Alternate decoding of mod == 3 */
 #define GroupMask   0xff        /* Group number stored in bits 0:7 */
+/* Misc flags */
+#define No64	    (1<<28)
 /* Source 2 operand type */
 #define Src2None    (0<<29)
 #define Src2CL      (1<<29)
@@ -92,19 +94,23 @@ static u32 opcode_table[256] = {
 	/* 0x00 - 0x07 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
+	ImplicitOps | Stack | No64, ImplicitOps | Stack | No64,
 	/* 0x08 - 0x0F */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
+	ImplicitOps | Stack | No64, 0,
 	/* 0x10 - 0x17 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
+	ImplicitOps | Stack | No64, ImplicitOps | Stack | No64,
 	/* 0x18 - 0x1F */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
+	ImplicitOps | Stack | No64, ImplicitOps | Stack | No64,
 	/* 0x20 - 0x27 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
@@ -133,7 +139,8 @@ static u32 opcode_table[256] = {
 	DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
 	DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
 	/* 0x60 - 0x67 */
-	0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
+	ImplicitOps | Stack | No64, ImplicitOps | Stack | No64,
+	0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
 	0, 0, 0, 0,
 	/* 0x68 - 0x6F */
 	SrcImm | Mov | Stack, 0, SrcImmByte | Mov | Stack, 0,
@@ -158,7 +165,7 @@ static u32 opcode_table[256] = {
 	/* 0x90 - 0x97 */
 	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
 	/* 0x98 - 0x9F */
-	0, 0, SrcImm | Src2Imm16, 0,
+	0, 0, SrcImm | Src2Imm16 | No64, 0,
 	ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
 	/* 0xA0 - 0xA7 */
 	ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
@@ -185,7 +192,7 @@ static u32 opcode_table[256] = {
 	ByteOp | DstMem | SrcImm | ModRM | Mov, DstMem | SrcImm | ModRM | Mov,
 	/* 0xC8 - 0xCF */
 	0, 0, 0, ImplicitOps | Stack,
-	ImplicitOps, SrcImmByte, ImplicitOps, ImplicitOps,
+	ImplicitOps, SrcImmByte, ImplicitOps | No64, ImplicitOps,
 	/* 0xD0 - 0xD7 */
 	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
 	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
@@ -198,7 +205,7 @@ static u32 opcode_table[256] = {
 	ByteOp | SrcImmUByte, SrcImmUByte,
 	/* 0xE8 - 0xEF */
 	SrcImm | Stack, SrcImm | ImplicitOps,
-	SrcImmU | Src2Imm16, SrcImmByte | ImplicitOps,
+	SrcImmU | Src2Imm16 | No64, SrcImmByte | ImplicitOps,
 	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
 	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
 	/* 0xF0 - 0xF7 */
@@ -244,11 +251,13 @@ static u32 twobyte_table[256] = {
 	/* 0x90 - 0x9F */
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0xA0 - 0xA7 */
-	0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
+	ImplicitOps | Stack, ImplicitOps | Stack,
+	0, DstMem | SrcReg | ModRM | BitOp,
 	DstMem | SrcReg | Src2ImmByte | ModRM,
 	DstMem | SrcReg | Src2CL | ModRM, 0, 0,
 	/* 0xA8 - 0xAF */
-	0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
+	ImplicitOps | Stack, ImplicitOps | Stack,
+	0, DstMem | SrcReg | ModRM | BitOp,
 	DstMem | SrcReg | Src2ImmByte | ModRM,
 	DstMem | SrcReg | Src2CL | ModRM,
 	ModRM, 0,
@@ -613,6 +622,9 @@ static int do_insn_fetch(struct x86_emulate_ctxt *ctxt,
 {
 	int rc = 0;
 
+	/* x86 instructions are limited to 15 bytes. */
+	if (eip + size - ctxt->decode.eip_orig > 15)
+		return X86EMUL_UNHANDLEABLE;
 	eip += ctxt->cs_base;
 	while (size--) {
 		rc = do_fetch_insn_byte(ctxt, ops, eip++, dest++);
@@ -871,7 +883,7 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 	/* Shadow copy of register state. Committed on successful emulation. */
 
 	memset(c, 0, sizeof(struct decode_cache));
-	c->eip = kvm_rip_read(ctxt->vcpu);
+	c->eip = c->eip_orig = kvm_rip_read(ctxt->vcpu);
 	ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
 	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
 
@@ -962,6 +974,11 @@ done_prefixes:
 		}
 	}
 
+	if (mode == X86EMUL_MODE_PROT64 && (c->d & No64)) {
+		kvm_report_emulation_failure(ctxt->vcpu, "invalid x86/64 instruction");;
+		return -1;
+	}
+
 	if (c->d & Group) {
 		group = c->d & GroupMask;
 		c->modrm = insn_fetch(u8, 1, c->eip);
@@ -1186,6 +1203,69 @@ static int emulate_pop(struct x86_emulate_ctxt *ctxt,
 	return rc;
 }
 
+static void emulate_push_sreg(struct x86_emulate_ctxt *ctxt, int seg)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment segment;
+
+	kvm_x86_ops->get_segment(ctxt->vcpu, &segment, seg);
+
+	c->src.val = segment.selector;
+	emulate_push(ctxt);
+}
+
+static int emulate_pop_sreg(struct x86_emulate_ctxt *ctxt,
+			     struct x86_emulate_ops *ops, int seg)
+{
+	struct decode_cache *c = &ctxt->decode;
+	unsigned long selector;
+	int rc;
+
+	rc = emulate_pop(ctxt, ops, &selector, c->op_bytes);
+	if (rc != 0)
+		return rc;
+
+	rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)selector, 1, seg);
+	return rc;
+}
+
+static void emulate_pusha(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	unsigned long old_esp = c->regs[VCPU_REGS_RSP];
+	int reg = VCPU_REGS_RAX;
+
+	while (reg <= VCPU_REGS_RDI) {
+		(reg == VCPU_REGS_RSP) ?
+		(c->src.val = old_esp) : (c->src.val = c->regs[reg]);
+
+		emulate_push(ctxt);
+		++reg;
+	}
+}
+
+static int emulate_popa(struct x86_emulate_ctxt *ctxt,
+			struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc = 0;
+	int reg = VCPU_REGS_RDI;
+
+	while (reg >= VCPU_REGS_RAX) {
+		if (reg == VCPU_REGS_RSP) {
+			register_address_increment(c, &c->regs[VCPU_REGS_RSP],
+							c->op_bytes);
+			--reg;
+		}
+
+		rc = emulate_pop(ctxt, ops, &c->regs[reg], c->op_bytes);
+		if (rc != 0)
+			break;
+		--reg;
+	}
+	return rc;
+}
+
 static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
 				struct x86_emulate_ops *ops)
 {
@@ -1707,18 +1787,45 @@ special_insn:
 	      add:		/* add */
 		emulate_2op_SrcV("add", c->src, c->dst, ctxt->eflags);
 		break;
+	case 0x06:		/* push es */
+		emulate_push_sreg(ctxt, VCPU_SREG_ES);
+		break;
+	case 0x07:		/* pop es */
+		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_ES);
+		if (rc != 0)
+			goto done;
+		break;
 	case 0x08 ... 0x0d:
 	      or:		/* or */
 		emulate_2op_SrcV("or", c->src, c->dst, ctxt->eflags);
 		break;
+	case 0x0e:		/* push cs */
+		emulate_push_sreg(ctxt, VCPU_SREG_CS);
+		break;
 	case 0x10 ... 0x15:
 	      adc:		/* adc */
 		emulate_2op_SrcV("adc", c->src, c->dst, ctxt->eflags);
 		break;
+	case 0x16:		/* push ss */
+		emulate_push_sreg(ctxt, VCPU_SREG_SS);
+		break;
+	case 0x17:		/* pop ss */
+		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_SS);
+		if (rc != 0)
+			goto done;
+		break;
 	case 0x18 ... 0x1d:
 	      sbb:		/* sbb */
 		emulate_2op_SrcV("sbb", c->src, c->dst, ctxt->eflags);
 		break;
+	case 0x1e:		/* push ds */
+		emulate_push_sreg(ctxt, VCPU_SREG_DS);
+		break;
+	case 0x1f:		/* pop ds */
+		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_DS);
+		if (rc != 0)
+			goto done;
+		break;
 	case 0x20 ... 0x25:
 	      and:		/* and */
 		emulate_2op_SrcV("and", c->src, c->dst, ctxt->eflags);
@@ -1750,6 +1857,14 @@ special_insn:
 		if (rc != 0)
 			goto done;
 		break;
+	case 0x60:	/* pusha */
+		emulate_pusha(ctxt);
+		break;
+	case 0x61:	/* popa */
+		rc = emulate_popa(ctxt, ops);
+		if (rc != 0)
+			goto done;
+		break;
 	case 0x63:		/* movsxd */
 		if (ctxt->mode != X86EMUL_MODE_PROT64)
 			goto cannot_emulate;
@@ -1761,7 +1876,7 @@ special_insn:
 		break;
 	case 0x6c:		/* insb */
 	case 0x6d:		/* insw/insd */
-		 if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
+		 if (kvm_emulate_pio_string(ctxt->vcpu,
 				1,
 				(c->d & ByteOp) ? 1 : c->op_bytes,
 				c->rep_prefix ?
@@ -1777,7 +1892,7 @@ special_insn:
 		return 0;
 	case 0x6e:		/* outsb */
 	case 0x6f:		/* outsw/outsd */
-		if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
+		if (kvm_emulate_pio_string(ctxt->vcpu,
 				0,
 				(c->d & ByteOp) ? 1 : c->op_bytes,
 				c->rep_prefix ?
@@ -2070,7 +2185,7 @@ special_insn:
 	case 0xef: /* out (e/r)ax,dx */
 		port = c->regs[VCPU_REGS_RDX];
 		io_dir_in = 0;
-	do_io:	if (kvm_emulate_pio(ctxt->vcpu, NULL, io_dir_in,
+	do_io:	if (kvm_emulate_pio(ctxt->vcpu, io_dir_in,
 				   (c->d & ByteOp) ? 1 : c->op_bytes,
 				   port) != 0) {
 			c->eip = saved_eip;
@@ -2297,6 +2412,14 @@ twobyte_insn:
 			jmp_rel(c, c->src.val);
 		c->dst.type = OP_NONE;
 		break;
+	case 0xa0:	  /* push fs */
+		emulate_push_sreg(ctxt, VCPU_SREG_FS);
+		break;
+	case 0xa1:	 /* pop fs */
+		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_FS);
+		if (rc != 0)
+			goto done;
+		break;
 	case 0xa3:
 	      bt:		/* bt */
 		c->dst.type = OP_NONE;
@@ -2308,6 +2431,14 @@ twobyte_insn:
 	case 0xa5: /* shld cl, r, r/m */
 		emulate_2op_cl("shld", c->src2, c->src, c->dst, ctxt->eflags);
 		break;
+	case 0xa8:	/* push gs */
+		emulate_push_sreg(ctxt, VCPU_SREG_GS);
+		break;
+	case 0xa9:	/* pop gs */
+		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_GS);
+		if (rc != 0)
+			goto done;
+		break;
 	case 0xab:
 	      bts:		/* bts */
 		/* only subword offset */
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 144e7f60b5e2..296aba49472a 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -29,6 +29,8 @@
  *   Based on QEMU and Xen.
  */
 
+#define pr_fmt(fmt) "pit: " fmt
+
 #include <linux/kvm_host.h>
 
 #include "irq.h"
@@ -262,7 +264,7 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
 
 static void destroy_pit_timer(struct kvm_timer *pt)
 {
-	pr_debug("pit: execute del timer!\n");
+	pr_debug("execute del timer!\n");
 	hrtimer_cancel(&pt->timer);
 }
 
@@ -284,7 +286,7 @@ static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period)
 
 	interval = muldiv64(val, NSEC_PER_SEC, KVM_PIT_FREQ);
 
-	pr_debug("pit: create pit timer, interval is %llu nsec\n", interval);
+	pr_debug("create pit timer, interval is %llu nsec\n", interval);
 
 	/* TODO The new value only affected after the retriggered */
 	hrtimer_cancel(&pt->timer);
@@ -309,7 +311,7 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 
 	WARN_ON(!mutex_is_locked(&ps->lock));
 
-	pr_debug("pit: load_count val is %d, channel is %d\n", val, channel);
+	pr_debug("load_count val is %d, channel is %d\n", val, channel);
 
 	/*
 	 * The largest possible initial count is 0; this is equivalent
@@ -395,8 +397,8 @@ static int pit_ioport_write(struct kvm_io_device *this,
 	mutex_lock(&pit_state->lock);
 
 	if (val != 0)
-		pr_debug("pit: write addr is 0x%x, len is %d, val is 0x%x\n",
-			  (unsigned int)addr, len, val);
+		pr_debug("write addr is 0x%x, len is %d, val is 0x%x\n",
+			 (unsigned int)addr, len, val);
 
 	if (addr == 3) {
 		channel = val >> 6;
@@ -688,10 +690,8 @@ static void __inject_pit_timer_intr(struct kvm *kvm)
 	struct kvm_vcpu *vcpu;
 	int i;
 
-	mutex_lock(&kvm->irq_lock);
 	kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 1);
 	kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 0);
-	mutex_unlock(&kvm->irq_lock);
 
 	/*
 	 * Provides NMI watchdog support via Virtual Wire mode.
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 01f151682802..d057c0cbd245 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -38,7 +38,15 @@ static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
 	s->isr_ack |= (1 << irq);
 	if (s != &s->pics_state->pics[0])
 		irq += 8;
+	/*
+	 * We are dropping lock while calling ack notifiers since ack
+	 * notifier callbacks for assigned devices call into PIC recursively.
+	 * Other interrupt may be delivered to PIC while lock is dropped but
+	 * it should be safe since PIC state is already updated at this stage.
+	 */
+	spin_unlock(&s->pics_state->lock);
 	kvm_notify_acked_irq(s->pics_state->kvm, SELECT_PIC(irq), irq);
+	spin_lock(&s->pics_state->lock);
 }
 
 void kvm_pic_clear_isr_ack(struct kvm *kvm)
@@ -176,16 +184,18 @@ int kvm_pic_set_irq(void *opaque, int irq, int level)
 static inline void pic_intack(struct kvm_kpic_state *s, int irq)
 {
 	s->isr |= 1 << irq;
-	if (s->auto_eoi) {
-		if (s->rotate_on_auto_eoi)
-			s->priority_add = (irq + 1) & 7;
-		pic_clear_isr(s, irq);
-	}
 	/*
 	 * We don't clear a level sensitive interrupt here
 	 */
 	if (!(s->elcr & (1 << irq)))
 		s->irr &= ~(1 << irq);
+
+	if (s->auto_eoi) {
+		if (s->rotate_on_auto_eoi)
+			s->priority_add = (irq + 1) & 7;
+		pic_clear_isr(s, irq);
+	}
+
 }
 
 int kvm_pic_read_irq(struct kvm *kvm)
@@ -225,22 +235,11 @@ int kvm_pic_read_irq(struct kvm *kvm)
 
 void kvm_pic_reset(struct kvm_kpic_state *s)
 {
-	int irq, irqbase, n;
+	int irq;
 	struct kvm *kvm = s->pics_state->irq_request_opaque;
 	struct kvm_vcpu *vcpu0 = kvm->bsp_vcpu;
+	u8 irr = s->irr, isr = s->imr;
 
-	if (s == &s->pics_state->pics[0])
-		irqbase = 0;
-	else
-		irqbase = 8;
-
-	for (irq = 0; irq < PIC_NUM_PINS/2; irq++) {
-		if (vcpu0 && kvm_apic_accept_pic_intr(vcpu0))
-			if (s->irr & (1 << irq) || s->isr & (1 << irq)) {
-				n = irq + irqbase;
-				kvm_notify_acked_irq(kvm, SELECT_PIC(n), n);
-			}
-	}
 	s->last_irr = 0;
 	s->irr = 0;
 	s->imr = 0;
@@ -256,6 +255,13 @@ void kvm_pic_reset(struct kvm_kpic_state *s)
 	s->rotate_on_auto_eoi = 0;
 	s->special_fully_nested_mode = 0;
 	s->init4 = 0;
+
+	for (irq = 0; irq < PIC_NUM_PINS/2; irq++) {
+		if (vcpu0 && kvm_apic_accept_pic_intr(vcpu0))
+			if (irr & (1 << irq) || isr & (1 << irq)) {
+				pic_clear_isr(s, irq);
+			}
+	}
 }
 
 static void pic_ioport_write(void *opaque, u32 addr, u32 val)
@@ -298,9 +304,9 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val)
 				priority = get_priority(s, s->isr);
 				if (priority != 8) {
 					irq = (priority + s->priority_add) & 7;
-					pic_clear_isr(s, irq);
 					if (cmd == 5)
 						s->priority_add = (irq + 1) & 7;
+					pic_clear_isr(s, irq);
 					pic_update_irq(s->pics_state);
 				}
 				break;
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 7d6058a2fd38..be399e207d57 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -71,6 +71,7 @@ struct kvm_pic {
 	int output;		/* intr from master PIC */
 	struct kvm_io_device dev;
 	void (*ack_notifier)(void *opaque, int irq);
+	unsigned long irq_states[16];
 };
 
 struct kvm_pic *kvm_create_pic(struct kvm *kvm);
@@ -85,7 +86,11 @@ static inline struct kvm_pic *pic_irqchip(struct kvm *kvm)
 
 static inline int irqchip_in_kernel(struct kvm *kvm)
 {
-	return pic_irqchip(kvm) != NULL;
+	int ret;
+
+	ret = (pic_irqchip(kvm) != NULL);
+	smp_rmb();
+	return ret;
 }
 
 void kvm_pic_reset(struct kvm_kpic_state *s);
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 23c217692ea9..cd60c0bd1b32 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -32,7 +32,6 @@
 #include <asm/current.h>
 #include <asm/apicdef.h>
 #include <asm/atomic.h>
-#include <asm/apicdef.h>
 #include "kvm_cache_regs.h"
 #include "irq.h"
 #include "trace.h"
@@ -471,11 +470,8 @@ static void apic_set_eoi(struct kvm_lapic *apic)
 		trigger_mode = IOAPIC_LEVEL_TRIG;
 	else
 		trigger_mode = IOAPIC_EDGE_TRIG;
-	if (!(apic_get_reg(apic, APIC_SPIV) & APIC_SPIV_DIRECTED_EOI)) {
-		mutex_lock(&apic->vcpu->kvm->irq_lock);
+	if (!(apic_get_reg(apic, APIC_SPIV) & APIC_SPIV_DIRECTED_EOI))
 		kvm_ioapic_update_eoi(apic->vcpu->kvm, vector, trigger_mode);
-		mutex_unlock(&apic->vcpu->kvm->irq_lock);
-	}
 }
 
 static void apic_send_ipi(struct kvm_lapic *apic)
@@ -504,9 +500,7 @@ static void apic_send_ipi(struct kvm_lapic *apic)
 		   irq.trig_mode, irq.level, irq.dest_mode, irq.delivery_mode,
 		   irq.vector);
 
-	mutex_lock(&apic->vcpu->kvm->irq_lock);
 	kvm_irq_delivery_to_apic(apic->vcpu->kvm, apic, &irq);
-	mutex_unlock(&apic->vcpu->kvm->irq_lock);
 }
 
 static u32 apic_get_tmcct(struct kvm_lapic *apic)
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 818b92ad82cf..4c3e5b2314cb 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2789,7 +2789,7 @@ int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u32 error_code)
 	if (r)
 		goto out;
 
-	er = emulate_instruction(vcpu, vcpu->run, cr2, error_code, 0);
+	er = emulate_instruction(vcpu, cr2, error_code, 0);
 
 	switch (er) {
 	case EMULATE_DONE:
@@ -2800,6 +2800,7 @@ int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u32 error_code)
 	case EMULATE_FAIL:
 		vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
 		vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
+		vcpu->run->internal.ndata = 0;
 		return 0;
 	default:
 		BUG();
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 72558f8ff3f5..a6017132fba8 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -467,7 +467,6 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 		level = iterator.level;
 		sptep = iterator.sptep;
 
-		/* FIXME: properly handle invlpg on large guest pages */
 		if (level == PT_PAGE_TABLE_LEVEL  ||
 		    ((level == PT_DIRECTORY_LEVEL && is_large_pte(*sptep))) ||
 		    ((level == PT_PDPE_LEVEL && is_large_pte(*sptep)))) {
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index c17404add91f..3de0b37ec038 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -46,6 +46,7 @@ MODULE_LICENSE("GPL");
 #define SVM_FEATURE_NPT  (1 << 0)
 #define SVM_FEATURE_LBRV (1 << 1)
 #define SVM_FEATURE_SVML (1 << 2)
+#define SVM_FEATURE_PAUSE_FILTER (1 << 10)
 
 #define NESTED_EXIT_HOST	0	/* Exit handled on host level */
 #define NESTED_EXIT_DONE	1	/* Exit caused nested vmexit  */
@@ -53,15 +54,6 @@ MODULE_LICENSE("GPL");
 
 #define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
 
-/* Turn on to get debugging output*/
-/* #define NESTED_DEBUG */
-
-#ifdef NESTED_DEBUG
-#define nsvm_printk(fmt, args...) printk(KERN_INFO fmt, ## args)
-#else
-#define nsvm_printk(fmt, args...) do {} while(0)
-#endif
-
 static const u32 host_save_user_msrs[] = {
 #ifdef CONFIG_X86_64
 	MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
@@ -85,6 +77,9 @@ struct nested_state {
 	/* gpa pointers to the real vectors */
 	u64 vmcb_msrpm;
 
+	/* A VMEXIT is required but not yet emulated */
+	bool exit_required;
+
 	/* cache for intercepts of the guest */
 	u16 intercept_cr_read;
 	u16 intercept_cr_write;
@@ -112,6 +107,8 @@ struct vcpu_svm {
 	u32 *msrpm;
 
 	struct nested_state nested;
+
+	bool nmi_singlestep;
 };
 
 /* enable NPT for AMD64 and X86 with PAE */
@@ -286,7 +283,7 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	if (!svm->next_rip) {
-		if (emulate_instruction(vcpu, vcpu->run, 0, 0, EMULTYPE_SKIP) !=
+		if (emulate_instruction(vcpu, 0, 0, EMULTYPE_SKIP) !=
 				EMULATE_DONE)
 			printk(KERN_DEBUG "%s: NOP\n", __func__);
 		return;
@@ -316,7 +313,7 @@ static void svm_hardware_disable(void *garbage)
 	cpu_svm_disable();
 }
 
-static void svm_hardware_enable(void *garbage)
+static int svm_hardware_enable(void *garbage)
 {
 
 	struct svm_cpu_data *svm_data;
@@ -325,16 +322,21 @@ static void svm_hardware_enable(void *garbage)
 	struct desc_struct *gdt;
 	int me = raw_smp_processor_id();
 
+	rdmsrl(MSR_EFER, efer);
+	if (efer & EFER_SVME)
+		return -EBUSY;
+
 	if (!has_svm()) {
-		printk(KERN_ERR "svm_cpu_init: err EOPNOTSUPP on %d\n", me);
-		return;
+		printk(KERN_ERR "svm_hardware_enable: err EOPNOTSUPP on %d\n",
+		       me);
+		return -EINVAL;
 	}
 	svm_data = per_cpu(svm_data, me);
 
 	if (!svm_data) {
-		printk(KERN_ERR "svm_cpu_init: svm_data is NULL on %d\n",
+		printk(KERN_ERR "svm_hardware_enable: svm_data is NULL on %d\n",
 		       me);
-		return;
+		return -EINVAL;
 	}
 
 	svm_data->asid_generation = 1;
@@ -345,11 +347,12 @@ static void svm_hardware_enable(void *garbage)
 	gdt = (struct desc_struct *)gdt_descr.base;
 	svm_data->tss_desc = (struct kvm_ldttss_desc *)(gdt + GDT_ENTRY_TSS);
 
-	rdmsrl(MSR_EFER, efer);
 	wrmsrl(MSR_EFER, efer | EFER_SVME);
 
 	wrmsrl(MSR_VM_HSAVE_PA,
 	       page_to_pfn(svm_data->save_area) << PAGE_SHIFT);
+
+	return 0;
 }
 
 static void svm_cpu_uninit(int cpu)
@@ -476,7 +479,7 @@ static __init int svm_hardware_setup(void)
 		kvm_enable_efer_bits(EFER_SVME);
 	}
 
-	for_each_online_cpu(cpu) {
+	for_each_possible_cpu(cpu) {
 		r = svm_cpu_init(cpu);
 		if (r)
 			goto err;
@@ -510,7 +513,7 @@ static __exit void svm_hardware_unsetup(void)
 {
 	int cpu;
 
-	for_each_online_cpu(cpu)
+	for_each_possible_cpu(cpu)
 		svm_cpu_uninit(cpu);
 
 	__free_pages(pfn_to_page(iopm_base >> PAGE_SHIFT), IOPM_ALLOC_ORDER);
@@ -625,11 +628,12 @@ static void init_vmcb(struct vcpu_svm *svm)
 	save->rip = 0x0000fff0;
 	svm->vcpu.arch.regs[VCPU_REGS_RIP] = save->rip;
 
-	/*
-	 * cr0 val on cpu init should be 0x60000010, we enable cpu
-	 * cache by default. the orderly way is to enable cache in bios.
+	/* This is the guest-visible cr0 value.
+	 * svm_set_cr0() sets PG and WP and clears NW and CD on save->cr0.
 	 */
-	save->cr0 = 0x00000010 | X86_CR0_PG | X86_CR0_WP;
+	svm->vcpu.arch.cr0 = X86_CR0_NW | X86_CR0_CD | X86_CR0_ET;
+	kvm_set_cr0(&svm->vcpu, svm->vcpu.arch.cr0);
+
 	save->cr4 = X86_CR4_PAE;
 	/* rdx = ?? */
 
@@ -644,8 +648,6 @@ static void init_vmcb(struct vcpu_svm *svm)
 		control->intercept_cr_write &= ~(INTERCEPT_CR0_MASK|
 						 INTERCEPT_CR3_MASK);
 		save->g_pat = 0x0007040600070406ULL;
-		/* enable caching because the QEMU Bios doesn't enable it */
-		save->cr0 = X86_CR0_ET;
 		save->cr3 = 0;
 		save->cr4 = 0;
 	}
@@ -654,6 +656,11 @@ static void init_vmcb(struct vcpu_svm *svm)
 	svm->nested.vmcb = 0;
 	svm->vcpu.arch.hflags = 0;
 
+	if (svm_has(SVM_FEATURE_PAUSE_FILTER)) {
+		control->pause_filter_count = 3000;
+		control->intercept |= (1ULL << INTERCEPT_PAUSE);
+	}
+
 	enable_gif(svm);
 }
 
@@ -758,14 +765,13 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	int i;
 
 	if (unlikely(cpu != vcpu->cpu)) {
-		u64 tsc_this, delta;
+		u64 delta;
 
 		/*
 		 * Make sure that the guest sees a monotonically
 		 * increasing TSC.
 		 */
-		rdtscll(tsc_this);
-		delta = vcpu->arch.host_tsc - tsc_this;
+		delta = vcpu->arch.host_tsc - native_read_tsc();
 		svm->vmcb->control.tsc_offset += delta;
 		if (is_nested(svm))
 			svm->nested.hsave->control.tsc_offset += delta;
@@ -787,7 +793,7 @@ static void svm_vcpu_put(struct kvm_vcpu *vcpu)
 	for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
 		wrmsrl(host_save_user_msrs[i], svm->host_user_msrs[i]);
 
-	rdtscll(vcpu->arch.host_tsc);
+	vcpu->arch.host_tsc = native_read_tsc();
 }
 
 static unsigned long svm_get_rflags(struct kvm_vcpu *vcpu)
@@ -1045,7 +1051,7 @@ static void update_db_intercept(struct kvm_vcpu *vcpu)
 	svm->vmcb->control.intercept_exceptions &=
 		~((1 << DB_VECTOR) | (1 << BP_VECTOR));
 
-	if (vcpu->arch.singlestep)
+	if (svm->nmi_singlestep)
 		svm->vmcb->control.intercept_exceptions |= (1 << DB_VECTOR);
 
 	if (vcpu->guest_debug & KVM_GUESTDBG_ENABLE) {
@@ -1060,26 +1066,16 @@ static void update_db_intercept(struct kvm_vcpu *vcpu)
 		vcpu->guest_debug = 0;
 }
 
-static int svm_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
+static void svm_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
 {
-	int old_debug = vcpu->guest_debug;
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	vcpu->guest_debug = dbg->control;
-
-	update_db_intercept(vcpu);
-
 	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
 		svm->vmcb->save.dr7 = dbg->arch.debugreg[7];
 	else
 		svm->vmcb->save.dr7 = vcpu->arch.dr7;
 
-	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
-		svm->vmcb->save.rflags |= X86_EFLAGS_TF | X86_EFLAGS_RF;
-	else if (old_debug & KVM_GUESTDBG_SINGLESTEP)
-		svm->vmcb->save.rflags &= ~(X86_EFLAGS_TF | X86_EFLAGS_RF);
-
-	return 0;
+	update_db_intercept(vcpu);
 }
 
 static void load_host_msrs(struct kvm_vcpu *vcpu)
@@ -1180,7 +1176,7 @@ static void svm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long value,
 	}
 }
 
-static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int pf_interception(struct vcpu_svm *svm)
 {
 	u64 fault_address;
 	u32 error_code;
@@ -1194,17 +1190,19 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
 }
 
-static int db_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int db_interception(struct vcpu_svm *svm)
 {
+	struct kvm_run *kvm_run = svm->vcpu.run;
+
 	if (!(svm->vcpu.guest_debug &
 	      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP)) &&
-		!svm->vcpu.arch.singlestep) {
+		!svm->nmi_singlestep) {
 		kvm_queue_exception(&svm->vcpu, DB_VECTOR);
 		return 1;
 	}
 
-	if (svm->vcpu.arch.singlestep) {
-		svm->vcpu.arch.singlestep = false;
+	if (svm->nmi_singlestep) {
+		svm->nmi_singlestep = false;
 		if (!(svm->vcpu.guest_debug & KVM_GUESTDBG_SINGLESTEP))
 			svm->vmcb->save.rflags &=
 				~(X86_EFLAGS_TF | X86_EFLAGS_RF);
@@ -1223,25 +1221,27 @@ static int db_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int bp_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int bp_interception(struct vcpu_svm *svm)
 {
+	struct kvm_run *kvm_run = svm->vcpu.run;
+
 	kvm_run->exit_reason = KVM_EXIT_DEBUG;
 	kvm_run->debug.arch.pc = svm->vmcb->save.cs.base + svm->vmcb->save.rip;
 	kvm_run->debug.arch.exception = BP_VECTOR;
 	return 0;
 }
 
-static int ud_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int ud_interception(struct vcpu_svm *svm)
 {
 	int er;
 
-	er = emulate_instruction(&svm->vcpu, kvm_run, 0, 0, EMULTYPE_TRAP_UD);
+	er = emulate_instruction(&svm->vcpu, 0, 0, EMULTYPE_TRAP_UD);
 	if (er != EMULATE_DONE)
 		kvm_queue_exception(&svm->vcpu, UD_VECTOR);
 	return 1;
 }
 
-static int nm_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int nm_interception(struct vcpu_svm *svm)
 {
 	svm->vmcb->control.intercept_exceptions &= ~(1 << NM_VECTOR);
 	if (!(svm->vcpu.arch.cr0 & X86_CR0_TS))
@@ -1251,7 +1251,7 @@ static int nm_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int mc_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int mc_interception(struct vcpu_svm *svm)
 {
 	/*
 	 * On an #MC intercept the MCE handler is not called automatically in
@@ -1264,8 +1264,10 @@ static int mc_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int shutdown_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int shutdown_interception(struct vcpu_svm *svm)
 {
+	struct kvm_run *kvm_run = svm->vcpu.run;
+
 	/*
 	 * VMCB is undefined after a SHUTDOWN intercept
 	 * so reinitialize it.
@@ -1277,7 +1279,7 @@ static int shutdown_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 0;
 }
 
-static int io_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int io_interception(struct vcpu_svm *svm)
 {
 	u32 io_info = svm->vmcb->control.exit_info_1; /* address size bug? */
 	int size, in, string;
@@ -1291,7 +1293,7 @@ static int io_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 
 	if (string) {
 		if (emulate_instruction(&svm->vcpu,
-					kvm_run, 0, 0, 0) == EMULATE_DO_MMIO)
+					0, 0, 0) == EMULATE_DO_MMIO)
 			return 0;
 		return 1;
 	}
@@ -1301,33 +1303,33 @@ static int io_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	size = (io_info & SVM_IOIO_SIZE_MASK) >> SVM_IOIO_SIZE_SHIFT;
 
 	skip_emulated_instruction(&svm->vcpu);
-	return kvm_emulate_pio(&svm->vcpu, kvm_run, in, size, port);
+	return kvm_emulate_pio(&svm->vcpu, in, size, port);
 }
 
-static int nmi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int nmi_interception(struct vcpu_svm *svm)
 {
 	return 1;
 }
 
-static int intr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int intr_interception(struct vcpu_svm *svm)
 {
 	++svm->vcpu.stat.irq_exits;
 	return 1;
 }
 
-static int nop_on_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int nop_on_interception(struct vcpu_svm *svm)
 {
 	return 1;
 }
 
-static int halt_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int halt_interception(struct vcpu_svm *svm)
 {
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 1;
 	skip_emulated_instruction(&svm->vcpu);
 	return kvm_emulate_halt(&svm->vcpu);
 }
 
-static int vmmcall_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int vmmcall_interception(struct vcpu_svm *svm)
 {
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
@@ -1378,8 +1380,15 @@ static inline int nested_svm_intr(struct vcpu_svm *svm)
 
 	svm->vmcb->control.exit_code = SVM_EXIT_INTR;
 
-	if (nested_svm_exit_handled(svm)) {
-		nsvm_printk("VMexit -> INTR\n");
+	if (svm->nested.intercept & 1ULL) {
+		/*
+		 * The #vmexit can't be emulated here directly because this
+		 * code path runs with irqs and preemtion disabled. A
+		 * #vmexit emulation might sleep. Only signal request for
+		 * the #vmexit here.
+		 */
+		svm->nested.exit_required = true;
+		trace_kvm_nested_intr_vmexit(svm->vmcb->save.rip);
 		return 1;
 	}
 
@@ -1390,10 +1399,7 @@ static void *nested_svm_map(struct vcpu_svm *svm, u64 gpa, enum km_type idx)
 {
 	struct page *page;
 
-	down_read(&current->mm->mmap_sem);
 	page = gfn_to_page(svm->vcpu.kvm, gpa >> PAGE_SHIFT);
-	up_read(&current->mm->mmap_sem);
-
 	if (is_error_page(page))
 		goto error;
 
@@ -1532,14 +1538,12 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm)
 	}
 	default: {
 		u64 exit_bits = 1ULL << (exit_code - SVM_EXIT_INTR);
-		nsvm_printk("exit code: 0x%x\n", exit_code);
 		if (svm->nested.intercept & exit_bits)
 			vmexit = NESTED_EXIT_DONE;
 	}
 	}
 
 	if (vmexit == NESTED_EXIT_DONE) {
-		nsvm_printk("#VMEXIT reason=%04x\n", exit_code);
 		nested_svm_vmexit(svm);
 	}
 
@@ -1584,6 +1588,12 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
 	struct vmcb *hsave = svm->nested.hsave;
 	struct vmcb *vmcb = svm->vmcb;
 
+	trace_kvm_nested_vmexit_inject(vmcb->control.exit_code,
+				       vmcb->control.exit_info_1,
+				       vmcb->control.exit_info_2,
+				       vmcb->control.exit_int_info,
+				       vmcb->control.exit_int_info_err);
+
 	nested_vmcb = nested_svm_map(svm, svm->nested.vmcb, KM_USER0);
 	if (!nested_vmcb)
 		return 1;
@@ -1617,6 +1627,22 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
 	nested_vmcb->control.exit_info_2       = vmcb->control.exit_info_2;
 	nested_vmcb->control.exit_int_info     = vmcb->control.exit_int_info;
 	nested_vmcb->control.exit_int_info_err = vmcb->control.exit_int_info_err;
+
+	/*
+	 * If we emulate a VMRUN/#VMEXIT in the same host #vmexit cycle we have
+	 * to make sure that we do not lose injected events. So check event_inj
+	 * here and copy it to exit_int_info if it is valid.
+	 * Exit_int_info and event_inj can't be both valid because the case
+	 * below only happens on a VMRUN instruction intercept which has
+	 * no valid exit_int_info set.
+	 */
+	if (vmcb->control.event_inj & SVM_EVTINJ_VALID) {
+		struct vmcb_control_area *nc = &nested_vmcb->control;
+
+		nc->exit_int_info     = vmcb->control.event_inj;
+		nc->exit_int_info_err = vmcb->control.event_inj_err;
+	}
+
 	nested_vmcb->control.tlb_ctl           = 0;
 	nested_vmcb->control.event_inj         = 0;
 	nested_vmcb->control.event_inj_err     = 0;
@@ -1628,10 +1654,6 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
 	/* Restore the original control entries */
 	copy_vmcb_control_area(vmcb, hsave);
 
-	/* Kill any pending exceptions */
-	if (svm->vcpu.arch.exception.pending == true)
-		nsvm_printk("WARNING: Pending Exception\n");
-
 	kvm_clear_exception_queue(&svm->vcpu);
 	kvm_clear_interrupt_queue(&svm->vcpu);
 
@@ -1702,6 +1724,12 @@ static bool nested_svm_vmrun(struct vcpu_svm *svm)
 	/* nested_vmcb is our indicator if nested SVM is activated */
 	svm->nested.vmcb = svm->vmcb->save.rax;
 
+	trace_kvm_nested_vmrun(svm->vmcb->save.rip - 3, svm->nested.vmcb,
+			       nested_vmcb->save.rip,
+			       nested_vmcb->control.int_ctl,
+			       nested_vmcb->control.event_inj,
+			       nested_vmcb->control.nested_ctl);
+
 	/* Clear internal status */
 	kvm_clear_exception_queue(&svm->vcpu);
 	kvm_clear_interrupt_queue(&svm->vcpu);
@@ -1789,28 +1817,15 @@ static bool nested_svm_vmrun(struct vcpu_svm *svm)
 	svm->nested.intercept            = nested_vmcb->control.intercept;
 
 	force_new_asid(&svm->vcpu);
-	svm->vmcb->control.exit_int_info = nested_vmcb->control.exit_int_info;
-	svm->vmcb->control.exit_int_info_err = nested_vmcb->control.exit_int_info_err;
 	svm->vmcb->control.int_ctl = nested_vmcb->control.int_ctl | V_INTR_MASKING_MASK;
-	if (nested_vmcb->control.int_ctl & V_IRQ_MASK) {
-		nsvm_printk("nSVM Injecting Interrupt: 0x%x\n",
-				nested_vmcb->control.int_ctl);
-	}
 	if (nested_vmcb->control.int_ctl & V_INTR_MASKING_MASK)
 		svm->vcpu.arch.hflags |= HF_VINTR_MASK;
 	else
 		svm->vcpu.arch.hflags &= ~HF_VINTR_MASK;
 
-	nsvm_printk("nSVM exit_int_info: 0x%x | int_state: 0x%x\n",
-			nested_vmcb->control.exit_int_info,
-			nested_vmcb->control.int_state);
-
 	svm->vmcb->control.int_vector = nested_vmcb->control.int_vector;
 	svm->vmcb->control.int_state = nested_vmcb->control.int_state;
 	svm->vmcb->control.tsc_offset += nested_vmcb->control.tsc_offset;
-	if (nested_vmcb->control.event_inj & SVM_EVTINJ_VALID)
-		nsvm_printk("Injecting Event: 0x%x\n",
-				nested_vmcb->control.event_inj);
 	svm->vmcb->control.event_inj = nested_vmcb->control.event_inj;
 	svm->vmcb->control.event_inj_err = nested_vmcb->control.event_inj_err;
 
@@ -1837,7 +1852,7 @@ static void nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
 	to_vmcb->save.sysenter_eip = from_vmcb->save.sysenter_eip;
 }
 
-static int vmload_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int vmload_interception(struct vcpu_svm *svm)
 {
 	struct vmcb *nested_vmcb;
 
@@ -1857,7 +1872,7 @@ static int vmload_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int vmsave_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int vmsave_interception(struct vcpu_svm *svm)
 {
 	struct vmcb *nested_vmcb;
 
@@ -1877,10 +1892,8 @@ static int vmsave_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int vmrun_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int vmrun_interception(struct vcpu_svm *svm)
 {
-	nsvm_printk("VMrun\n");
-
 	if (nested_svm_check_permissions(svm))
 		return 1;
 
@@ -1907,7 +1920,7 @@ failed:
 	return 1;
 }
 
-static int stgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int stgi_interception(struct vcpu_svm *svm)
 {
 	if (nested_svm_check_permissions(svm))
 		return 1;
@@ -1920,7 +1933,7 @@ static int stgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int clgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int clgi_interception(struct vcpu_svm *svm)
 {
 	if (nested_svm_check_permissions(svm))
 		return 1;
@@ -1937,10 +1950,12 @@ static int clgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int invlpga_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int invlpga_interception(struct vcpu_svm *svm)
 {
 	struct kvm_vcpu *vcpu = &svm->vcpu;
-	nsvm_printk("INVLPGA\n");
+
+	trace_kvm_invlpga(svm->vmcb->save.rip, vcpu->arch.regs[VCPU_REGS_RCX],
+			  vcpu->arch.regs[VCPU_REGS_RAX]);
 
 	/* Let's treat INVLPGA the same as INVLPG (can be optimized!) */
 	kvm_mmu_invlpg(vcpu, vcpu->arch.regs[VCPU_REGS_RAX]);
@@ -1950,15 +1965,21 @@ static int invlpga_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int invalid_op_interception(struct vcpu_svm *svm,
-				   struct kvm_run *kvm_run)
+static int skinit_interception(struct vcpu_svm *svm)
 {
+	trace_kvm_skinit(svm->vmcb->save.rip, svm->vcpu.arch.regs[VCPU_REGS_RAX]);
+
 	kvm_queue_exception(&svm->vcpu, UD_VECTOR);
 	return 1;
 }
 
-static int task_switch_interception(struct vcpu_svm *svm,
-				    struct kvm_run *kvm_run)
+static int invalid_op_interception(struct vcpu_svm *svm)
+{
+	kvm_queue_exception(&svm->vcpu, UD_VECTOR);
+	return 1;
+}
+
+static int task_switch_interception(struct vcpu_svm *svm)
 {
 	u16 tss_selector;
 	int reason;
@@ -2008,14 +2029,14 @@ static int task_switch_interception(struct vcpu_svm *svm,
 	return kvm_task_switch(&svm->vcpu, tss_selector, reason);
 }
 
-static int cpuid_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int cpuid_interception(struct vcpu_svm *svm)
 {
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 2;
 	kvm_emulate_cpuid(&svm->vcpu);
 	return 1;
 }
 
-static int iret_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int iret_interception(struct vcpu_svm *svm)
 {
 	++svm->vcpu.stat.nmi_window_exits;
 	svm->vmcb->control.intercept &= ~(1UL << INTERCEPT_IRET);
@@ -2023,26 +2044,27 @@ static int iret_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int invlpg_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int invlpg_interception(struct vcpu_svm *svm)
 {
-	if (emulate_instruction(&svm->vcpu, kvm_run, 0, 0, 0) != EMULATE_DONE)
+	if (emulate_instruction(&svm->vcpu, 0, 0, 0) != EMULATE_DONE)
 		pr_unimpl(&svm->vcpu, "%s: failed\n", __func__);
 	return 1;
 }
 
-static int emulate_on_interception(struct vcpu_svm *svm,
-				   struct kvm_run *kvm_run)
+static int emulate_on_interception(struct vcpu_svm *svm)
 {
-	if (emulate_instruction(&svm->vcpu, NULL, 0, 0, 0) != EMULATE_DONE)
+	if (emulate_instruction(&svm->vcpu, 0, 0, 0) != EMULATE_DONE)
 		pr_unimpl(&svm->vcpu, "%s: failed\n", __func__);
 	return 1;
 }
 
-static int cr8_write_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int cr8_write_interception(struct vcpu_svm *svm)
 {
+	struct kvm_run *kvm_run = svm->vcpu.run;
+
 	u8 cr8_prev = kvm_get_cr8(&svm->vcpu);
 	/* instruction emulation calls kvm_set_cr8() */
-	emulate_instruction(&svm->vcpu, NULL, 0, 0, 0);
+	emulate_instruction(&svm->vcpu, 0, 0, 0);
 	if (irqchip_in_kernel(svm->vcpu.kvm)) {
 		svm->vmcb->control.intercept_cr_write &= ~INTERCEPT_CR8_MASK;
 		return 1;
@@ -2128,7 +2150,7 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 	return 0;
 }
 
-static int rdmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int rdmsr_interception(struct vcpu_svm *svm)
 {
 	u32 ecx = svm->vcpu.arch.regs[VCPU_REGS_RCX];
 	u64 data;
@@ -2221,7 +2243,7 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 	return 0;
 }
 
-static int wrmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int wrmsr_interception(struct vcpu_svm *svm)
 {
 	u32 ecx = svm->vcpu.arch.regs[VCPU_REGS_RCX];
 	u64 data = (svm->vcpu.arch.regs[VCPU_REGS_RAX] & -1u)
@@ -2237,17 +2259,18 @@ static int wrmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int msr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int msr_interception(struct vcpu_svm *svm)
 {
 	if (svm->vmcb->control.exit_info_1)
-		return wrmsr_interception(svm, kvm_run);
+		return wrmsr_interception(svm);
 	else
-		return rdmsr_interception(svm, kvm_run);
+		return rdmsr_interception(svm);
 }
 
-static int interrupt_window_interception(struct vcpu_svm *svm,
-				   struct kvm_run *kvm_run)
+static int interrupt_window_interception(struct vcpu_svm *svm)
 {
+	struct kvm_run *kvm_run = svm->vcpu.run;
+
 	svm_clear_vintr(svm);
 	svm->vmcb->control.int_ctl &= ~V_IRQ_MASK;
 	/*
@@ -2265,8 +2288,13 @@ static int interrupt_window_interception(struct vcpu_svm *svm,
 	return 1;
 }
 
-static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
-				      struct kvm_run *kvm_run) = {
+static int pause_interception(struct vcpu_svm *svm)
+{
+	kvm_vcpu_on_spin(&(svm->vcpu));
+	return 1;
+}
+
+static int (*svm_exit_handlers[])(struct vcpu_svm *svm) = {
 	[SVM_EXIT_READ_CR0]           		= emulate_on_interception,
 	[SVM_EXIT_READ_CR3]           		= emulate_on_interception,
 	[SVM_EXIT_READ_CR4]           		= emulate_on_interception,
@@ -2301,6 +2329,7 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
 	[SVM_EXIT_CPUID]			= cpuid_interception,
 	[SVM_EXIT_IRET]                         = iret_interception,
 	[SVM_EXIT_INVD]                         = emulate_on_interception,
+	[SVM_EXIT_PAUSE]			= pause_interception,
 	[SVM_EXIT_HLT]				= halt_interception,
 	[SVM_EXIT_INVLPG]			= invlpg_interception,
 	[SVM_EXIT_INVLPGA]			= invlpga_interception,
@@ -2314,26 +2343,36 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
 	[SVM_EXIT_VMSAVE]			= vmsave_interception,
 	[SVM_EXIT_STGI]				= stgi_interception,
 	[SVM_EXIT_CLGI]				= clgi_interception,
-	[SVM_EXIT_SKINIT]			= invalid_op_interception,
+	[SVM_EXIT_SKINIT]			= skinit_interception,
 	[SVM_EXIT_WBINVD]                       = emulate_on_interception,
 	[SVM_EXIT_MONITOR]			= invalid_op_interception,
 	[SVM_EXIT_MWAIT]			= invalid_op_interception,
 	[SVM_EXIT_NPF]				= pf_interception,
 };
 
-static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
+static int handle_exit(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
+	struct kvm_run *kvm_run = vcpu->run;
 	u32 exit_code = svm->vmcb->control.exit_code;
 
 	trace_kvm_exit(exit_code, svm->vmcb->save.rip);
 
+	if (unlikely(svm->nested.exit_required)) {
+		nested_svm_vmexit(svm);
+		svm->nested.exit_required = false;
+
+		return 1;
+	}
+
 	if (is_nested(svm)) {
 		int vmexit;
 
-		nsvm_printk("nested handle_exit: 0x%x | 0x%lx | 0x%lx | 0x%lx\n",
-			    exit_code, svm->vmcb->control.exit_info_1,
-			    svm->vmcb->control.exit_info_2, svm->vmcb->save.rip);
+		trace_kvm_nested_vmexit(svm->vmcb->save.rip, exit_code,
+					svm->vmcb->control.exit_info_1,
+					svm->vmcb->control.exit_info_2,
+					svm->vmcb->control.exit_int_info,
+					svm->vmcb->control.exit_int_info_err);
 
 		vmexit = nested_svm_exit_special(svm);
 
@@ -2383,7 +2422,7 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		return 0;
 	}
 
-	return svm_exit_handlers[exit_code](svm, kvm_run);
+	return svm_exit_handlers[exit_code](svm);
 }
 
 static void reload_tss(struct kvm_vcpu *vcpu)
@@ -2460,20 +2499,47 @@ static int svm_nmi_allowed(struct kvm_vcpu *vcpu)
 		!(svm->vcpu.arch.hflags & HF_NMI_MASK);
 }
 
+static bool svm_get_nmi_mask(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_svm *svm = to_svm(vcpu);
+
+	return !!(svm->vcpu.arch.hflags & HF_NMI_MASK);
+}
+
+static void svm_set_nmi_mask(struct kvm_vcpu *vcpu, bool masked)
+{
+	struct vcpu_svm *svm = to_svm(vcpu);
+
+	if (masked) {
+		svm->vcpu.arch.hflags |= HF_NMI_MASK;
+		svm->vmcb->control.intercept |= (1UL << INTERCEPT_IRET);
+	} else {
+		svm->vcpu.arch.hflags &= ~HF_NMI_MASK;
+		svm->vmcb->control.intercept &= ~(1UL << INTERCEPT_IRET);
+	}
+}
+
 static int svm_interrupt_allowed(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 	struct vmcb *vmcb = svm->vmcb;
-	return (vmcb->save.rflags & X86_EFLAGS_IF) &&
-		!(vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) &&
-		gif_set(svm) &&
-		!(is_nested(svm) && (svm->vcpu.arch.hflags & HF_VINTR_MASK));
+	int ret;
+
+	if (!gif_set(svm) ||
+	     (vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK))
+		return 0;
+
+	ret = !!(vmcb->save.rflags & X86_EFLAGS_IF);
+
+	if (is_nested(svm))
+		return ret && !(svm->vcpu.arch.hflags & HF_VINTR_MASK);
+
+	return ret;
 }
 
 static void enable_irq_window(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
-	nsvm_printk("Trying to open IRQ window\n");
 
 	nested_svm_intr(svm);
 
@@ -2498,7 +2564,7 @@ static void enable_nmi_window(struct kvm_vcpu *vcpu)
 	/* Something prevents NMI from been injected. Single step over
 	   possible problem (IRET or exception injection or interrupt
 	   shadow) */
-	vcpu->arch.singlestep = true;
+	svm->nmi_singlestep = true;
 	svm->vmcb->save.rflags |= (X86_EFLAGS_TF | X86_EFLAGS_RF);
 	update_db_intercept(vcpu);
 }
@@ -2588,13 +2654,20 @@ static void svm_complete_interrupts(struct vcpu_svm *svm)
 #define R "e"
 #endif
 
-static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u16 fs_selector;
 	u16 gs_selector;
 	u16 ldt_selector;
 
+	/*
+	 * A vmexit emulation is required before the vcpu can be executed
+	 * again.
+	 */
+	if (unlikely(svm->nested.exit_required))
+		return;
+
 	svm->vmcb->save.rax = vcpu->arch.regs[VCPU_REGS_RAX];
 	svm->vmcb->save.rsp = vcpu->arch.regs[VCPU_REGS_RSP];
 	svm->vmcb->save.rip = vcpu->arch.regs[VCPU_REGS_RIP];
@@ -2893,6 +2966,8 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.queue_exception = svm_queue_exception,
 	.interrupt_allowed = svm_interrupt_allowed,
 	.nmi_allowed = svm_nmi_allowed,
+	.get_nmi_mask = svm_get_nmi_mask,
+	.set_nmi_mask = svm_set_nmi_mask,
 	.enable_nmi_window = enable_nmi_window,
 	.enable_irq_window = enable_irq_window,
 	.update_cr8_intercept = update_cr8_intercept,
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index 0d480e77eacf..816e0449db0b 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -349,6 +349,171 @@ TRACE_EVENT(kvm_apic_accept_irq,
 		  __entry->coalesced ? " (coalesced)" : "")
 );
 
+/*
+ * Tracepoint for nested VMRUN
+ */
+TRACE_EVENT(kvm_nested_vmrun,
+	    TP_PROTO(__u64 rip, __u64 vmcb, __u64 nested_rip, __u32 int_ctl,
+		     __u32 event_inj, bool npt),
+	    TP_ARGS(rip, vmcb, nested_rip, int_ctl, event_inj, npt),
+
+	TP_STRUCT__entry(
+		__field(	__u64,		rip		)
+		__field(	__u64,		vmcb		)
+		__field(	__u64,		nested_rip	)
+		__field(	__u32,		int_ctl		)
+		__field(	__u32,		event_inj	)
+		__field(	bool,		npt		)
+	),
+
+	TP_fast_assign(
+		__entry->rip		= rip;
+		__entry->vmcb		= vmcb;
+		__entry->nested_rip	= nested_rip;
+		__entry->int_ctl	= int_ctl;
+		__entry->event_inj	= event_inj;
+		__entry->npt		= npt;
+	),
+
+	TP_printk("rip: 0x%016llx vmcb: 0x%016llx nrip: 0x%016llx int_ctl: 0x%08x "
+		  "event_inj: 0x%08x npt: %s\n",
+		__entry->rip, __entry->vmcb, __entry->nested_rip,
+		__entry->int_ctl, __entry->event_inj,
+		__entry->npt ? "on" : "off")
+);
+
+/*
+ * Tracepoint for #VMEXIT while nested
+ */
+TRACE_EVENT(kvm_nested_vmexit,
+	    TP_PROTO(__u64 rip, __u32 exit_code,
+		     __u64 exit_info1, __u64 exit_info2,
+		     __u32 exit_int_info, __u32 exit_int_info_err),
+	    TP_ARGS(rip, exit_code, exit_info1, exit_info2,
+		    exit_int_info, exit_int_info_err),
+
+	TP_STRUCT__entry(
+		__field(	__u64,		rip			)
+		__field(	__u32,		exit_code		)
+		__field(	__u64,		exit_info1		)
+		__field(	__u64,		exit_info2		)
+		__field(	__u32,		exit_int_info		)
+		__field(	__u32,		exit_int_info_err	)
+	),
+
+	TP_fast_assign(
+		__entry->rip			= rip;
+		__entry->exit_code		= exit_code;
+		__entry->exit_info1		= exit_info1;
+		__entry->exit_info2		= exit_info2;
+		__entry->exit_int_info		= exit_int_info;
+		__entry->exit_int_info_err	= exit_int_info_err;
+	),
+	TP_printk("rip: 0x%016llx reason: %s ext_inf1: 0x%016llx "
+		  "ext_inf2: 0x%016llx ext_int: 0x%08x ext_int_err: 0x%08x\n",
+		  __entry->rip,
+		  ftrace_print_symbols_seq(p, __entry->exit_code,
+					   kvm_x86_ops->exit_reasons_str),
+		  __entry->exit_info1, __entry->exit_info2,
+		  __entry->exit_int_info, __entry->exit_int_info_err)
+);
+
+/*
+ * Tracepoint for #VMEXIT reinjected to the guest
+ */
+TRACE_EVENT(kvm_nested_vmexit_inject,
+	    TP_PROTO(__u32 exit_code,
+		     __u64 exit_info1, __u64 exit_info2,
+		     __u32 exit_int_info, __u32 exit_int_info_err),
+	    TP_ARGS(exit_code, exit_info1, exit_info2,
+		    exit_int_info, exit_int_info_err),
+
+	TP_STRUCT__entry(
+		__field(	__u32,		exit_code		)
+		__field(	__u64,		exit_info1		)
+		__field(	__u64,		exit_info2		)
+		__field(	__u32,		exit_int_info		)
+		__field(	__u32,		exit_int_info_err	)
+	),
+
+	TP_fast_assign(
+		__entry->exit_code		= exit_code;
+		__entry->exit_info1		= exit_info1;
+		__entry->exit_info2		= exit_info2;
+		__entry->exit_int_info		= exit_int_info;
+		__entry->exit_int_info_err	= exit_int_info_err;
+	),
+
+	TP_printk("reason: %s ext_inf1: 0x%016llx "
+		  "ext_inf2: 0x%016llx ext_int: 0x%08x ext_int_err: 0x%08x\n",
+		  ftrace_print_symbols_seq(p, __entry->exit_code,
+					   kvm_x86_ops->exit_reasons_str),
+		__entry->exit_info1, __entry->exit_info2,
+		__entry->exit_int_info, __entry->exit_int_info_err)
+);
+
+/*
+ * Tracepoint for nested #vmexit because of interrupt pending
+ */
+TRACE_EVENT(kvm_nested_intr_vmexit,
+	    TP_PROTO(__u64 rip),
+	    TP_ARGS(rip),
+
+	TP_STRUCT__entry(
+		__field(	__u64,	rip	)
+	),
+
+	TP_fast_assign(
+		__entry->rip	=	rip
+	),
+
+	TP_printk("rip: 0x%016llx\n", __entry->rip)
+);
+
+/*
+ * Tracepoint for nested #vmexit because of interrupt pending
+ */
+TRACE_EVENT(kvm_invlpga,
+	    TP_PROTO(__u64 rip, int asid, u64 address),
+	    TP_ARGS(rip, asid, address),
+
+	TP_STRUCT__entry(
+		__field(	__u64,	rip	)
+		__field(	int,	asid	)
+		__field(	__u64,	address	)
+	),
+
+	TP_fast_assign(
+		__entry->rip		=	rip;
+		__entry->asid		=	asid;
+		__entry->address	=	address;
+	),
+
+	TP_printk("rip: 0x%016llx asid: %d address: 0x%016llx\n",
+		  __entry->rip, __entry->asid, __entry->address)
+);
+
+/*
+ * Tracepoint for nested #vmexit because of interrupt pending
+ */
+TRACE_EVENT(kvm_skinit,
+	    TP_PROTO(__u64 rip, __u32 slb),
+	    TP_ARGS(rip, slb),
+
+	TP_STRUCT__entry(
+		__field(	__u64,	rip	)
+		__field(	__u32,	slb	)
+	),
+
+	TP_fast_assign(
+		__entry->rip		=	rip;
+		__entry->slb		=	slb;
+	),
+
+	TP_printk("rip: 0x%016llx slb: 0x%08x\n",
+		  __entry->rip, __entry->slb)
+);
+
 #endif /* _TRACE_KVM_H */
 
 /* This part must be outside protection */
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ed53b42caba1..d4918d6fc924 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -61,12 +61,37 @@ module_param_named(unrestricted_guest,
 static int __read_mostly emulate_invalid_guest_state = 0;
 module_param(emulate_invalid_guest_state, bool, S_IRUGO);
 
+/*
+ * These 2 parameters are used to config the controls for Pause-Loop Exiting:
+ * ple_gap:    upper bound on the amount of time between two successive
+ *             executions of PAUSE in a loop. Also indicate if ple enabled.
+ *             According to test, this time is usually small than 41 cycles.
+ * ple_window: upper bound on the amount of time a guest is allowed to execute
+ *             in a PAUSE loop. Tests indicate that most spinlocks are held for
+ *             less than 2^12 cycles
+ * Time is measured based on a counter that runs at the same rate as the TSC,
+ * refer SDM volume 3b section 21.6.13 & 22.1.3.
+ */
+#define KVM_VMX_DEFAULT_PLE_GAP    41
+#define KVM_VMX_DEFAULT_PLE_WINDOW 4096
+static int ple_gap = KVM_VMX_DEFAULT_PLE_GAP;
+module_param(ple_gap, int, S_IRUGO);
+
+static int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW;
+module_param(ple_window, int, S_IRUGO);
+
 struct vmcs {
 	u32 revision_id;
 	u32 abort;
 	char data[0];
 };
 
+struct shared_msr_entry {
+	unsigned index;
+	u64 data;
+	u64 mask;
+};
+
 struct vcpu_vmx {
 	struct kvm_vcpu       vcpu;
 	struct list_head      local_vcpus_link;
@@ -74,13 +99,12 @@ struct vcpu_vmx {
 	int                   launched;
 	u8                    fail;
 	u32                   idt_vectoring_info;
-	struct kvm_msr_entry *guest_msrs;
-	struct kvm_msr_entry *host_msrs;
+	struct shared_msr_entry *guest_msrs;
 	int                   nmsrs;
 	int                   save_nmsrs;
-	int                   msr_offset_efer;
 #ifdef CONFIG_X86_64
-	int                   msr_offset_kernel_gs_base;
+	u64 		      msr_host_kernel_gs_base;
+	u64 		      msr_guest_kernel_gs_base;
 #endif
 	struct vmcs          *vmcs;
 	struct {
@@ -88,7 +112,6 @@ struct vcpu_vmx {
 		u16           fs_sel, gs_sel, ldt_sel;
 		int           gs_ldt_reload_needed;
 		int           fs_reload_needed;
-		int           guest_efer_loaded;
 	} host_state;
 	struct {
 		int vm86_active;
@@ -107,7 +130,6 @@ struct vcpu_vmx {
 	} rmode;
 	int vpid;
 	bool emulation_required;
-	enum emulation_result invalid_state_emulation_result;
 
 	/* Support for vnmi-less CPUs */
 	int soft_vnmi_blocked;
@@ -176,6 +198,8 @@ static struct kvm_vmx_segment_field {
 	VMX_SEGMENT_FIELD(LDTR),
 };
 
+static u64 host_efer;
+
 static void ept_save_pdptrs(struct kvm_vcpu *vcpu);
 
 /*
@@ -184,28 +208,12 @@ static void ept_save_pdptrs(struct kvm_vcpu *vcpu);
  */
 static const u32 vmx_msr_index[] = {
 #ifdef CONFIG_X86_64
-	MSR_SYSCALL_MASK, MSR_LSTAR, MSR_CSTAR, MSR_KERNEL_GS_BASE,
+	MSR_SYSCALL_MASK, MSR_LSTAR, MSR_CSTAR,
 #endif
 	MSR_EFER, MSR_K6_STAR,
 };
 #define NR_VMX_MSR ARRAY_SIZE(vmx_msr_index)
 
-static void load_msrs(struct kvm_msr_entry *e, int n)
-{
-	int i;
-
-	for (i = 0; i < n; ++i)
-		wrmsrl(e[i].index, e[i].data);
-}
-
-static void save_msrs(struct kvm_msr_entry *e, int n)
-{
-	int i;
-
-	for (i = 0; i < n; ++i)
-		rdmsrl(e[i].index, e[i].data);
-}
-
 static inline int is_page_fault(u32 intr_info)
 {
 	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
@@ -320,6 +328,12 @@ static inline int cpu_has_vmx_unrestricted_guest(void)
 		SECONDARY_EXEC_UNRESTRICTED_GUEST;
 }
 
+static inline int cpu_has_vmx_ple(void)
+{
+	return vmcs_config.cpu_based_2nd_exec_ctrl &
+		SECONDARY_EXEC_PAUSE_LOOP_EXITING;
+}
+
 static inline int vm_need_virtualize_apic_accesses(struct kvm *kvm)
 {
 	return flexpriority_enabled &&
@@ -348,7 +362,7 @@ static int __find_msr_index(struct vcpu_vmx *vmx, u32 msr)
 	int i;
 
 	for (i = 0; i < vmx->nmsrs; ++i)
-		if (vmx->guest_msrs[i].index == msr)
+		if (vmx_msr_index[vmx->guest_msrs[i].index] == msr)
 			return i;
 	return -1;
 }
@@ -379,7 +393,7 @@ static inline void __invept(int ext, u64 eptp, gpa_t gpa)
 			: : "a" (&operand), "c" (ext) : "cc", "memory");
 }
 
-static struct kvm_msr_entry *find_msr_entry(struct vcpu_vmx *vmx, u32 msr)
+static struct shared_msr_entry *find_msr_entry(struct vcpu_vmx *vmx, u32 msr)
 {
 	int i;
 
@@ -570,17 +584,12 @@ static void reload_tss(void)
 	load_TR_desc();
 }
 
-static void load_transition_efer(struct vcpu_vmx *vmx)
+static bool update_transition_efer(struct vcpu_vmx *vmx, int efer_offset)
 {
-	int efer_offset = vmx->msr_offset_efer;
-	u64 host_efer;
 	u64 guest_efer;
 	u64 ignore_bits;
 
-	if (efer_offset < 0)
-		return;
-	host_efer = vmx->host_msrs[efer_offset].data;
-	guest_efer = vmx->guest_msrs[efer_offset].data;
+	guest_efer = vmx->vcpu.arch.shadow_efer;
 
 	/*
 	 * NX is emulated; LMA and LME handled by hardware; SCE meaninless
@@ -593,27 +602,17 @@ static void load_transition_efer(struct vcpu_vmx *vmx)
 	if (guest_efer & EFER_LMA)
 		ignore_bits &= ~(u64)EFER_SCE;
 #endif
-	if ((guest_efer & ~ignore_bits) == (host_efer & ~ignore_bits))
-		return;
-
-	vmx->host_state.guest_efer_loaded = 1;
 	guest_efer &= ~ignore_bits;
 	guest_efer |= host_efer & ignore_bits;
-	wrmsrl(MSR_EFER, guest_efer);
-	vmx->vcpu.stat.efer_reload++;
-}
-
-static void reload_host_efer(struct vcpu_vmx *vmx)
-{
-	if (vmx->host_state.guest_efer_loaded) {
-		vmx->host_state.guest_efer_loaded = 0;
-		load_msrs(vmx->host_msrs + vmx->msr_offset_efer, 1);
-	}
+	vmx->guest_msrs[efer_offset].data = guest_efer;
+	vmx->guest_msrs[efer_offset].mask = ~ignore_bits;
+	return true;
 }
 
 static void vmx_save_host_state(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	int i;
 
 	if (vmx->host_state.loaded)
 		return;
@@ -650,13 +649,15 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
 #endif
 
 #ifdef CONFIG_X86_64
-	if (is_long_mode(&vmx->vcpu))
-		save_msrs(vmx->host_msrs +
-			  vmx->msr_offset_kernel_gs_base, 1);
-
+	if (is_long_mode(&vmx->vcpu)) {
+		rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
+		wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
+	}
 #endif
-	load_msrs(vmx->guest_msrs, vmx->save_nmsrs);
-	load_transition_efer(vmx);
+	for (i = 0; i < vmx->save_nmsrs; ++i)
+		kvm_set_shared_msr(vmx->guest_msrs[i].index,
+				   vmx->guest_msrs[i].data,
+				   vmx->guest_msrs[i].mask);
 }
 
 static void __vmx_load_host_state(struct vcpu_vmx *vmx)
@@ -684,9 +685,12 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
 		local_irq_restore(flags);
 	}
 	reload_tss();
-	save_msrs(vmx->guest_msrs, vmx->save_nmsrs);
-	load_msrs(vmx->host_msrs, vmx->save_nmsrs);
-	reload_host_efer(vmx);
+#ifdef CONFIG_X86_64
+	if (is_long_mode(&vmx->vcpu)) {
+		rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
+		wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
+	}
+#endif
 }
 
 static void vmx_load_host_state(struct vcpu_vmx *vmx)
@@ -877,19 +881,14 @@ static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 /*
  * Swap MSR entry in host/guest MSR entry array.
  */
-#ifdef CONFIG_X86_64
 static void move_msr_up(struct vcpu_vmx *vmx, int from, int to)
 {
-	struct kvm_msr_entry tmp;
+	struct shared_msr_entry tmp;
 
 	tmp = vmx->guest_msrs[to];
 	vmx->guest_msrs[to] = vmx->guest_msrs[from];
 	vmx->guest_msrs[from] = tmp;
-	tmp = vmx->host_msrs[to];
-	vmx->host_msrs[to] = vmx->host_msrs[from];
-	vmx->host_msrs[from] = tmp;
 }
-#endif
 
 /*
  * Set up the vmcs to automatically save and restore system
@@ -898,15 +897,13 @@ static void move_msr_up(struct vcpu_vmx *vmx, int from, int to)
  */
 static void setup_msrs(struct vcpu_vmx *vmx)
 {
-	int save_nmsrs;
+	int save_nmsrs, index;
 	unsigned long *msr_bitmap;
 
 	vmx_load_host_state(vmx);
 	save_nmsrs = 0;
 #ifdef CONFIG_X86_64
 	if (is_long_mode(&vmx->vcpu)) {
-		int index;
-
 		index = __find_msr_index(vmx, MSR_SYSCALL_MASK);
 		if (index >= 0)
 			move_msr_up(vmx, index, save_nmsrs++);
@@ -916,9 +913,6 @@ static void setup_msrs(struct vcpu_vmx *vmx)
 		index = __find_msr_index(vmx, MSR_CSTAR);
 		if (index >= 0)
 			move_msr_up(vmx, index, save_nmsrs++);
-		index = __find_msr_index(vmx, MSR_KERNEL_GS_BASE);
-		if (index >= 0)
-			move_msr_up(vmx, index, save_nmsrs++);
 		/*
 		 * MSR_K6_STAR is only needed on long mode guests, and only
 		 * if efer.sce is enabled.
@@ -928,13 +922,11 @@ static void setup_msrs(struct vcpu_vmx *vmx)
 			move_msr_up(vmx, index, save_nmsrs++);
 	}
 #endif
-	vmx->save_nmsrs = save_nmsrs;
+	index = __find_msr_index(vmx, MSR_EFER);
+	if (index >= 0 && update_transition_efer(vmx, index))
+		move_msr_up(vmx, index, save_nmsrs++);
 
-#ifdef CONFIG_X86_64
-	vmx->msr_offset_kernel_gs_base =
-		__find_msr_index(vmx, MSR_KERNEL_GS_BASE);
-#endif
-	vmx->msr_offset_efer = __find_msr_index(vmx, MSR_EFER);
+	vmx->save_nmsrs = save_nmsrs;
 
 	if (cpu_has_vmx_msr_bitmap()) {
 		if (is_long_mode(&vmx->vcpu))
@@ -976,7 +968,7 @@ static void guest_write_tsc(u64 guest_tsc, u64 host_tsc)
 static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 {
 	u64 data;
-	struct kvm_msr_entry *msr;
+	struct shared_msr_entry *msr;
 
 	if (!pdata) {
 		printk(KERN_ERR "BUG: get_msr called with NULL pdata\n");
@@ -991,9 +983,13 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 	case MSR_GS_BASE:
 		data = vmcs_readl(GUEST_GS_BASE);
 		break;
+	case MSR_KERNEL_GS_BASE:
+		vmx_load_host_state(to_vmx(vcpu));
+		data = to_vmx(vcpu)->msr_guest_kernel_gs_base;
+		break;
+#endif
 	case MSR_EFER:
 		return kvm_get_msr_common(vcpu, msr_index, pdata);
-#endif
 	case MSR_IA32_TSC:
 		data = guest_read_tsc();
 		break;
@@ -1007,6 +1003,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 		data = vmcs_readl(GUEST_SYSENTER_ESP);
 		break;
 	default:
+		vmx_load_host_state(to_vmx(vcpu));
 		msr = find_msr_entry(to_vmx(vcpu), msr_index);
 		if (msr) {
 			vmx_load_host_state(to_vmx(vcpu));
@@ -1028,7 +1025,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct kvm_msr_entry *msr;
+	struct shared_msr_entry *msr;
 	u64 host_tsc;
 	int ret = 0;
 
@@ -1044,6 +1041,10 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 	case MSR_GS_BASE:
 		vmcs_writel(GUEST_GS_BASE, data);
 		break;
+	case MSR_KERNEL_GS_BASE:
+		vmx_load_host_state(vmx);
+		vmx->msr_guest_kernel_gs_base = data;
+		break;
 #endif
 	case MSR_IA32_SYSENTER_CS:
 		vmcs_write32(GUEST_SYSENTER_CS, data);
@@ -1097,30 +1098,14 @@ static void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
 	}
 }
 
-static int set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
+static void set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
 {
-	int old_debug = vcpu->guest_debug;
-	unsigned long flags;
-
-	vcpu->guest_debug = dbg->control;
-	if (!(vcpu->guest_debug & KVM_GUESTDBG_ENABLE))
-		vcpu->guest_debug = 0;
-
 	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
 		vmcs_writel(GUEST_DR7, dbg->arch.debugreg[7]);
 	else
 		vmcs_writel(GUEST_DR7, vcpu->arch.dr7);
 
-	flags = vmcs_readl(GUEST_RFLAGS);
-	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
-		flags |= X86_EFLAGS_TF | X86_EFLAGS_RF;
-	else if (old_debug & KVM_GUESTDBG_SINGLESTEP)
-		flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_RF);
-	vmcs_writel(GUEST_RFLAGS, flags);
-
 	update_exception_bitmap(vcpu);
-
-	return 0;
 }
 
 static __init int cpu_has_kvm_support(void)
@@ -1139,12 +1124,15 @@ static __init int vmx_disabled_by_bios(void)
 	/* locked but not enabled */
 }
 
-static void hardware_enable(void *garbage)
+static int hardware_enable(void *garbage)
 {
 	int cpu = raw_smp_processor_id();
 	u64 phys_addr = __pa(per_cpu(vmxarea, cpu));
 	u64 old;
 
+	if (read_cr4() & X86_CR4_VMXE)
+		return -EBUSY;
+
 	INIT_LIST_HEAD(&per_cpu(vcpus_on_cpu, cpu));
 	rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
 	if ((old & (FEATURE_CONTROL_LOCKED |
@@ -1159,6 +1147,10 @@ static void hardware_enable(void *garbage)
 	asm volatile (ASM_VMX_VMXON_RAX
 		      : : "a"(&phys_addr), "m"(phys_addr)
 		      : "memory", "cc");
+
+	ept_sync_global();
+
+	return 0;
 }
 
 static void vmclear_local_vcpus(void)
@@ -1250,7 +1242,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 			SECONDARY_EXEC_WBINVD_EXITING |
 			SECONDARY_EXEC_ENABLE_VPID |
 			SECONDARY_EXEC_ENABLE_EPT |
-			SECONDARY_EXEC_UNRESTRICTED_GUEST;
+			SECONDARY_EXEC_UNRESTRICTED_GUEST |
+			SECONDARY_EXEC_PAUSE_LOOP_EXITING;
 		if (adjust_vmx_controls(min2, opt2,
 					MSR_IA32_VMX_PROCBASED_CTLS2,
 					&_cpu_based_2nd_exec_control) < 0)
@@ -1344,15 +1337,17 @@ static void free_kvm_area(void)
 {
 	int cpu;
 
-	for_each_online_cpu(cpu)
+	for_each_possible_cpu(cpu) {
 		free_vmcs(per_cpu(vmxarea, cpu));
+		per_cpu(vmxarea, cpu) = NULL;
+	}
 }
 
 static __init int alloc_kvm_area(void)
 {
 	int cpu;
 
-	for_each_online_cpu(cpu) {
+	for_each_possible_cpu(cpu) {
 		struct vmcs *vmcs;
 
 		vmcs = alloc_vmcs_cpu(cpu);
@@ -1394,6 +1389,9 @@ static __init int hardware_setup(void)
 	if (enable_ept && !cpu_has_vmx_ept_2m_page())
 		kvm_disable_largepages();
 
+	if (!cpu_has_vmx_ple())
+		ple_gap = 0;
+
 	return alloc_kvm_area();
 }
 
@@ -1536,8 +1534,16 @@ continue_rmode:
 static void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct kvm_msr_entry *msr = find_msr_entry(vmx, MSR_EFER);
+	struct shared_msr_entry *msr = find_msr_entry(vmx, MSR_EFER);
+
+	if (!msr)
+		return;
 
+	/*
+	 * Force kernel_gs_base reloading before EFER changes, as control
+	 * of this msr depends on is_long_mode().
+	 */
+	vmx_load_host_state(to_vmx(vcpu));
 	vcpu->arch.shadow_efer = efer;
 	if (!msr)
 		return;
@@ -1727,6 +1733,7 @@ static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 		vmcs_write64(EPT_POINTER, eptp);
 		guest_cr3 = is_paging(vcpu) ? vcpu->arch.cr3 :
 			vcpu->kvm->arch.ept_identity_map_addr;
+		ept_load_pdptrs(vcpu);
 	}
 
 	vmx_flush_tlb(vcpu);
@@ -2302,13 +2309,22 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 				~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
 		if (vmx->vpid == 0)
 			exec_control &= ~SECONDARY_EXEC_ENABLE_VPID;
-		if (!enable_ept)
+		if (!enable_ept) {
 			exec_control &= ~SECONDARY_EXEC_ENABLE_EPT;
+			enable_unrestricted_guest = 0;
+		}
 		if (!enable_unrestricted_guest)
 			exec_control &= ~SECONDARY_EXEC_UNRESTRICTED_GUEST;
+		if (!ple_gap)
+			exec_control &= ~SECONDARY_EXEC_PAUSE_LOOP_EXITING;
 		vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control);
 	}
 
+	if (ple_gap) {
+		vmcs_write32(PLE_GAP, ple_gap);
+		vmcs_write32(PLE_WINDOW, ple_window);
+	}
+
 	vmcs_write32(PAGE_FAULT_ERROR_CODE_MASK, !!bypass_guest_pf);
 	vmcs_write32(PAGE_FAULT_ERROR_CODE_MATCH, !!bypass_guest_pf);
 	vmcs_write32(CR3_TARGET_COUNT, 0);           /* 22.2.1 */
@@ -2376,10 +2392,9 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 		if (wrmsr_safe(index, data_low, data_high) < 0)
 			continue;
 		data = data_low | ((u64)data_high << 32);
-		vmx->host_msrs[j].index = index;
-		vmx->host_msrs[j].reserved = 0;
-		vmx->host_msrs[j].data = data;
-		vmx->guest_msrs[j] = vmx->host_msrs[j];
+		vmx->guest_msrs[j].index = i;
+		vmx->guest_msrs[j].data = 0;
+		vmx->guest_msrs[j].mask = -1ull;
 		++vmx->nmsrs;
 	}
 
@@ -2510,7 +2525,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 	if (vmx->vpid != 0)
 		vmcs_write16(VIRTUAL_PROCESSOR_ID, vmx->vpid);
 
-	vmx->vcpu.arch.cr0 = 0x60000010;
+	vmx->vcpu.arch.cr0 = X86_CR0_NW | X86_CR0_CD | X86_CR0_ET;
 	vmx_set_cr0(&vmx->vcpu, vmx->vcpu.arch.cr0); /* enter rmode */
 	vmx_set_cr4(&vmx->vcpu, 0);
 	vmx_set_efer(&vmx->vcpu, 0);
@@ -2627,6 +2642,34 @@ static int vmx_nmi_allowed(struct kvm_vcpu *vcpu)
 				GUEST_INTR_STATE_NMI));
 }
 
+static bool vmx_get_nmi_mask(struct kvm_vcpu *vcpu)
+{
+	if (!cpu_has_virtual_nmis())
+		return to_vmx(vcpu)->soft_vnmi_blocked;
+	else
+		return !!(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+			  GUEST_INTR_STATE_NMI);
+}
+
+static void vmx_set_nmi_mask(struct kvm_vcpu *vcpu, bool masked)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+	if (!cpu_has_virtual_nmis()) {
+		if (vmx->soft_vnmi_blocked != masked) {
+			vmx->soft_vnmi_blocked = masked;
+			vmx->vnmi_blocked_time = 0;
+		}
+	} else {
+		if (masked)
+			vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO,
+				      GUEST_INTR_STATE_NMI);
+		else
+			vmcs_clear_bits(GUEST_INTERRUPTIBILITY_INFO,
+					GUEST_INTR_STATE_NMI);
+	}
+}
+
 static int vmx_interrupt_allowed(struct kvm_vcpu *vcpu)
 {
 	return (vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) &&
@@ -2659,7 +2702,7 @@ static int handle_rmode_exception(struct kvm_vcpu *vcpu,
 	 * Cause the #SS fault with 0 error code in VM86 mode.
 	 */
 	if (((vec == GP_VECTOR) || (vec == SS_VECTOR)) && err_code == 0)
-		if (emulate_instruction(vcpu, NULL, 0, 0, 0) == EMULATE_DONE)
+		if (emulate_instruction(vcpu, 0, 0, 0) == EMULATE_DONE)
 			return 1;
 	/*
 	 * Forward all other exceptions that are valid in real mode.
@@ -2710,15 +2753,16 @@ static void kvm_machine_check(void)
 #endif
 }
 
-static int handle_machine_check(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_machine_check(struct kvm_vcpu *vcpu)
 {
 	/* already handled by vcpu_run */
 	return 1;
 }
 
-static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_exception(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	struct kvm_run *kvm_run = vcpu->run;
 	u32 intr_info, ex_no, error_code;
 	unsigned long cr2, rip, dr6;
 	u32 vect_info;
@@ -2728,12 +2772,17 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
 
 	if (is_machine_check(intr_info))
-		return handle_machine_check(vcpu, kvm_run);
+		return handle_machine_check(vcpu);
 
 	if ((vect_info & VECTORING_INFO_VALID_MASK) &&
-						!is_page_fault(intr_info))
-		printk(KERN_ERR "%s: unexpected, vectoring info 0x%x "
-		       "intr info 0x%x\n", __func__, vect_info, intr_info);
+	    !is_page_fault(intr_info)) {
+		vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+		vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_SIMUL_EX;
+		vcpu->run->internal.ndata = 2;
+		vcpu->run->internal.data[0] = vect_info;
+		vcpu->run->internal.data[1] = intr_info;
+		return 0;
+	}
 
 	if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == INTR_TYPE_NMI_INTR)
 		return 1;  /* already handled by vmx_vcpu_run() */
@@ -2744,7 +2793,7 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	}
 
 	if (is_invalid_opcode(intr_info)) {
-		er = emulate_instruction(vcpu, kvm_run, 0, 0, EMULTYPE_TRAP_UD);
+		er = emulate_instruction(vcpu, 0, 0, EMULTYPE_TRAP_UD);
 		if (er != EMULATE_DONE)
 			kvm_queue_exception(vcpu, UD_VECTOR);
 		return 1;
@@ -2803,20 +2852,19 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 0;
 }
 
-static int handle_external_interrupt(struct kvm_vcpu *vcpu,
-				     struct kvm_run *kvm_run)
+static int handle_external_interrupt(struct kvm_vcpu *vcpu)
 {
 	++vcpu->stat.irq_exits;
 	return 1;
 }
 
-static int handle_triple_fault(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_triple_fault(struct kvm_vcpu *vcpu)
 {
-	kvm_run->exit_reason = KVM_EXIT_SHUTDOWN;
+	vcpu->run->exit_reason = KVM_EXIT_SHUTDOWN;
 	return 0;
 }
 
-static int handle_io(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_io(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification;
 	int size, in, string;
@@ -2827,8 +2875,7 @@ static int handle_io(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	string = (exit_qualification & 16) != 0;
 
 	if (string) {
-		if (emulate_instruction(vcpu,
-					kvm_run, 0, 0, 0) == EMULATE_DO_MMIO)
+		if (emulate_instruction(vcpu, 0, 0, 0) == EMULATE_DO_MMIO)
 			return 0;
 		return 1;
 	}
@@ -2838,7 +2885,7 @@ static int handle_io(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	port = exit_qualification >> 16;
 
 	skip_emulated_instruction(vcpu);
-	return kvm_emulate_pio(vcpu, kvm_run, in, size, port);
+	return kvm_emulate_pio(vcpu, in, size, port);
 }
 
 static void
@@ -2852,7 +2899,7 @@ vmx_patch_hypercall(struct kvm_vcpu *vcpu, unsigned char *hypercall)
 	hypercall[2] = 0xc1;
 }
 
-static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_cr(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification, val;
 	int cr;
@@ -2887,7 +2934,7 @@ static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 					return 1;
 				if (cr8_prev <= cr8)
 					return 1;
-				kvm_run->exit_reason = KVM_EXIT_SET_TPR;
+				vcpu->run->exit_reason = KVM_EXIT_SET_TPR;
 				return 0;
 			}
 		};
@@ -2922,13 +2969,13 @@ static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	default:
 		break;
 	}
-	kvm_run->exit_reason = 0;
+	vcpu->run->exit_reason = 0;
 	pr_unimpl(vcpu, "unhandled control register: op %d cr %d\n",
 	       (int)(exit_qualification >> 4) & 3, cr);
 	return 0;
 }
 
-static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_dr(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification;
 	unsigned long val;
@@ -2944,13 +2991,13 @@ static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		 * guest debugging itself.
 		 */
 		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) {
-			kvm_run->debug.arch.dr6 = vcpu->arch.dr6;
-			kvm_run->debug.arch.dr7 = dr;
-			kvm_run->debug.arch.pc =
+			vcpu->run->debug.arch.dr6 = vcpu->arch.dr6;
+			vcpu->run->debug.arch.dr7 = dr;
+			vcpu->run->debug.arch.pc =
 				vmcs_readl(GUEST_CS_BASE) +
 				vmcs_readl(GUEST_RIP);
-			kvm_run->debug.arch.exception = DB_VECTOR;
-			kvm_run->exit_reason = KVM_EXIT_DEBUG;
+			vcpu->run->debug.arch.exception = DB_VECTOR;
+			vcpu->run->exit_reason = KVM_EXIT_DEBUG;
 			return 0;
 		} else {
 			vcpu->arch.dr7 &= ~DR7_GD;
@@ -3016,13 +3063,13 @@ static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int handle_cpuid(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_cpuid(struct kvm_vcpu *vcpu)
 {
 	kvm_emulate_cpuid(vcpu);
 	return 1;
 }
 
-static int handle_rdmsr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_rdmsr(struct kvm_vcpu *vcpu)
 {
 	u32 ecx = vcpu->arch.regs[VCPU_REGS_RCX];
 	u64 data;
@@ -3041,7 +3088,7 @@ static int handle_rdmsr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int handle_wrmsr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_wrmsr(struct kvm_vcpu *vcpu)
 {
 	u32 ecx = vcpu->arch.regs[VCPU_REGS_RCX];
 	u64 data = (vcpu->arch.regs[VCPU_REGS_RAX] & -1u)
@@ -3058,14 +3105,12 @@ static int handle_wrmsr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int handle_tpr_below_threshold(struct kvm_vcpu *vcpu,
-				      struct kvm_run *kvm_run)
+static int handle_tpr_below_threshold(struct kvm_vcpu *vcpu)
 {
 	return 1;
 }
 
-static int handle_interrupt_window(struct kvm_vcpu *vcpu,
-				   struct kvm_run *kvm_run)
+static int handle_interrupt_window(struct kvm_vcpu *vcpu)
 {
 	u32 cpu_based_vm_exec_control;
 
@@ -3081,34 +3126,34 @@ static int handle_interrupt_window(struct kvm_vcpu *vcpu,
 	 * possible
 	 */
 	if (!irqchip_in_kernel(vcpu->kvm) &&
-	    kvm_run->request_interrupt_window &&
+	    vcpu->run->request_interrupt_window &&
 	    !kvm_cpu_has_interrupt(vcpu)) {
-		kvm_run->exit_reason = KVM_EXIT_IRQ_WINDOW_OPEN;
+		vcpu->run->exit_reason = KVM_EXIT_IRQ_WINDOW_OPEN;
 		return 0;
 	}
 	return 1;
 }
 
-static int handle_halt(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_halt(struct kvm_vcpu *vcpu)
 {
 	skip_emulated_instruction(vcpu);
 	return kvm_emulate_halt(vcpu);
 }
 
-static int handle_vmcall(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_vmcall(struct kvm_vcpu *vcpu)
 {
 	skip_emulated_instruction(vcpu);
 	kvm_emulate_hypercall(vcpu);
 	return 1;
 }
 
-static int handle_vmx_insn(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_vmx_insn(struct kvm_vcpu *vcpu)
 {
 	kvm_queue_exception(vcpu, UD_VECTOR);
 	return 1;
 }
 
-static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_invlpg(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 
@@ -3117,14 +3162,14 @@ static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int handle_wbinvd(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_wbinvd(struct kvm_vcpu *vcpu)
 {
 	skip_emulated_instruction(vcpu);
 	/* TODO: Add support for VT-d/pass-through device */
 	return 1;
 }
 
-static int handle_apic_access(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_apic_access(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification;
 	enum emulation_result er;
@@ -3133,7 +3178,7 @@ static int handle_apic_access(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 	offset = exit_qualification & 0xffful;
 
-	er = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
+	er = emulate_instruction(vcpu, 0, 0, 0);
 
 	if (er !=  EMULATE_DONE) {
 		printk(KERN_ERR
@@ -3144,7 +3189,7 @@ static int handle_apic_access(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int handle_task_switch(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_task_switch(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	unsigned long exit_qualification;
@@ -3198,7 +3243,7 @@ static int handle_task_switch(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_ept_violation(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification;
 	gpa_t gpa;
@@ -3219,8 +3264,8 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 			vmcs_readl(GUEST_LINEAR_ADDRESS));
 		printk(KERN_ERR "EPT: Exit qualification is 0x%lx\n",
 			(long unsigned int)exit_qualification);
-		kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
-		kvm_run->hw.hardware_exit_reason = EXIT_REASON_EPT_VIOLATION;
+		vcpu->run->exit_reason = KVM_EXIT_UNKNOWN;
+		vcpu->run->hw.hardware_exit_reason = EXIT_REASON_EPT_VIOLATION;
 		return 0;
 	}
 
@@ -3290,7 +3335,7 @@ static void ept_misconfig_inspect_spte(struct kvm_vcpu *vcpu, u64 spte,
 	}
 }
 
-static int handle_ept_misconfig(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_ept_misconfig(struct kvm_vcpu *vcpu)
 {
 	u64 sptes[4];
 	int nr_sptes, i;
@@ -3306,13 +3351,13 @@ static int handle_ept_misconfig(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	for (i = PT64_ROOT_LEVEL; i > PT64_ROOT_LEVEL - nr_sptes; --i)
 		ept_misconfig_inspect_spte(vcpu, sptes[i-1], i);
 
-	kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
-	kvm_run->hw.hardware_exit_reason = EXIT_REASON_EPT_MISCONFIG;
+	vcpu->run->exit_reason = KVM_EXIT_UNKNOWN;
+	vcpu->run->hw.hardware_exit_reason = EXIT_REASON_EPT_MISCONFIG;
 
 	return 0;
 }
 
-static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_nmi_window(struct kvm_vcpu *vcpu)
 {
 	u32 cpu_based_vm_exec_control;
 
@@ -3325,36 +3370,50 @@ static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
-static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
-				struct kvm_run *kvm_run)
+static int handle_invalid_guest_state(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	enum emulation_result err = EMULATE_DONE;
-
-	local_irq_enable();
-	preempt_enable();
+	int ret = 1;
 
 	while (!guest_state_valid(vcpu)) {
-		err = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
+		err = emulate_instruction(vcpu, 0, 0, 0);
 
-		if (err == EMULATE_DO_MMIO)
-			break;
+		if (err == EMULATE_DO_MMIO) {
+			ret = 0;
+			goto out;
+		}
 
 		if (err != EMULATE_DONE) {
 			kvm_report_emulation_failure(vcpu, "emulation failure");
-			break;
+			vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+			vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
+			vcpu->run->internal.ndata = 0;
+			ret = 0;
+			goto out;
 		}
 
 		if (signal_pending(current))
-			break;
+			goto out;
 		if (need_resched())
 			schedule();
 	}
 
-	preempt_disable();
-	local_irq_disable();
+	vmx->emulation_required = 0;
+out:
+	return ret;
+}
 
-	vmx->invalid_state_emulation_result = err;
+/*
+ * Indicate a busy-waiting vcpu in spinlock. We do not enable the PAUSE
+ * exiting, so only get here on cpu with PAUSE-Loop-Exiting.
+ */
+static int handle_pause(struct kvm_vcpu *vcpu)
+{
+	skip_emulated_instruction(vcpu);
+	kvm_vcpu_on_spin(vcpu);
+
+	return 1;
 }
 
 /*
@@ -3362,8 +3421,7 @@ static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
  * to be done to userspace and return 0.
  */
-static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
-				      struct kvm_run *kvm_run) = {
+static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
 	[EXIT_REASON_EXCEPTION_NMI]           = handle_exception,
 	[EXIT_REASON_EXTERNAL_INTERRUPT]      = handle_external_interrupt,
 	[EXIT_REASON_TRIPLE_FAULT]            = handle_triple_fault,
@@ -3394,6 +3452,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
 	[EXIT_REASON_MCE_DURING_VMENTRY]      = handle_machine_check,
 	[EXIT_REASON_EPT_VIOLATION]	      = handle_ept_violation,
 	[EXIT_REASON_EPT_MISCONFIG]           = handle_ept_misconfig,
+	[EXIT_REASON_PAUSE_INSTRUCTION]       = handle_pause,
 };
 
 static const int kvm_vmx_max_exit_handlers =
@@ -3403,7 +3462,7 @@ static const int kvm_vmx_max_exit_handlers =
  * The guest has exited.  See if we can fix it or if we need userspace
  * assistance.
  */
-static int vmx_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
+static int vmx_handle_exit(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	u32 exit_reason = vmx->exit_reason;
@@ -3411,13 +3470,9 @@ static int vmx_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 
 	trace_kvm_exit(exit_reason, kvm_rip_read(vcpu));
 
-	/* If we need to emulate an MMIO from handle_invalid_guest_state
-	 * we just return 0 */
-	if (vmx->emulation_required && emulate_invalid_guest_state) {
-		if (guest_state_valid(vcpu))
-			vmx->emulation_required = 0;
-		return vmx->invalid_state_emulation_result != EMULATE_DO_MMIO;
-	}
+	/* If guest state is invalid, start emulating */
+	if (vmx->emulation_required && emulate_invalid_guest_state)
+		return handle_invalid_guest_state(vcpu);
 
 	/* Access CR3 don't cause VMExit in paging mode, so we need
 	 * to sync with guest real CR3. */
@@ -3425,8 +3480,8 @@ static int vmx_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
 
 	if (unlikely(vmx->fail)) {
-		kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
-		kvm_run->fail_entry.hardware_entry_failure_reason
+		vcpu->run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+		vcpu->run->fail_entry.hardware_entry_failure_reason
 			= vmcs_read32(VM_INSTRUCTION_ERROR);
 		return 0;
 	}
@@ -3459,10 +3514,10 @@ static int vmx_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 
 	if (exit_reason < kvm_vmx_max_exit_handlers
 	    && kvm_vmx_exit_handlers[exit_reason])
-		return kvm_vmx_exit_handlers[exit_reason](vcpu, kvm_run);
+		return kvm_vmx_exit_handlers[exit_reason](vcpu);
 	else {
-		kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
-		kvm_run->hw.hardware_exit_reason = exit_reason;
+		vcpu->run->exit_reason = KVM_EXIT_UNKNOWN;
+		vcpu->run->hw.hardware_exit_reason = exit_reason;
 	}
 	return 0;
 }
@@ -3600,23 +3655,18 @@ static void fixup_rmode_irq(struct vcpu_vmx *vmx)
 #define Q "l"
 #endif
 
-static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
-	if (enable_ept && is_paging(vcpu)) {
-		vmcs_writel(GUEST_CR3, vcpu->arch.cr3);
-		ept_load_pdptrs(vcpu);
-	}
 	/* Record the guest's net vcpu time for enforced NMI injections. */
 	if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked))
 		vmx->entry_time = ktime_get();
 
-	/* Handle invalid guest state instead of entering VMX */
-	if (vmx->emulation_required && emulate_invalid_guest_state) {
-		handle_invalid_guest_state(vcpu, kvm_run);
+	/* Don't enter VMX if guest state is invalid, let the exit handler
+	   start emulation until we arrive back to a valid state */
+	if (vmx->emulation_required && emulate_invalid_guest_state)
 		return;
-	}
 
 	if (test_bit(VCPU_REGS_RSP, (unsigned long *)&vcpu->arch.regs_dirty))
 		vmcs_writel(GUEST_RSP, vcpu->arch.regs[VCPU_REGS_RSP]);
@@ -3775,7 +3825,6 @@ static void vmx_free_vcpu(struct kvm_vcpu *vcpu)
 		__clear_bit(vmx->vpid, vmx_vpid_bitmap);
 	spin_unlock(&vmx_vpid_lock);
 	vmx_free_vmcs(vcpu);
-	kfree(vmx->host_msrs);
 	kfree(vmx->guest_msrs);
 	kvm_vcpu_uninit(vcpu);
 	kmem_cache_free(kvm_vcpu_cache, vmx);
@@ -3802,10 +3851,6 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 		goto uninit_vcpu;
 	}
 
-	vmx->host_msrs = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (!vmx->host_msrs)
-		goto free_guest_msrs;
-
 	vmx->vmcs = alloc_vmcs();
 	if (!vmx->vmcs)
 		goto free_msrs;
@@ -3836,8 +3881,6 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 free_vmcs:
 	free_vmcs(vmx->vmcs);
 free_msrs:
-	kfree(vmx->host_msrs);
-free_guest_msrs:
 	kfree(vmx->guest_msrs);
 uninit_vcpu:
 	kvm_vcpu_uninit(&vmx->vcpu);
@@ -3973,6 +4016,8 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.queue_exception = vmx_queue_exception,
 	.interrupt_allowed = vmx_interrupt_allowed,
 	.nmi_allowed = vmx_nmi_allowed,
+	.get_nmi_mask = vmx_get_nmi_mask,
+	.set_nmi_mask = vmx_set_nmi_mask,
 	.enable_nmi_window = enable_nmi_window,
 	.enable_irq_window = enable_irq_window,
 	.update_cr8_intercept = update_cr8_intercept,
@@ -3987,7 +4032,12 @@ static struct kvm_x86_ops vmx_x86_ops = {
 
 static int __init vmx_init(void)
 {
-	int r;
+	int r, i;
+
+	rdmsrl_safe(MSR_EFER, &host_efer);
+
+	for (i = 0; i < NR_VMX_MSR; ++i)
+		kvm_define_shared_msr(i, vmx_msr_index[i]);
 
 	vmx_io_bitmap_a = (unsigned long *)__get_free_page(GFP_KERNEL);
 	if (!vmx_io_bitmap_a)
@@ -4049,8 +4099,6 @@ static int __init vmx_init(void)
 	if (bypass_guest_pf)
 		kvm_mmu_set_nonpresent_ptes(~0xffeull, 0ull);
 
-	ept_sync_global();
-
 	return 0;
 
 out3:
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index ae07d261527c..9d068966fb2a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -37,11 +37,13 @@
 #include <linux/iommu.h>
 #include <linux/intel-iommu.h>
 #include <linux/cpufreq.h>
+#include <linux/user-return-notifier.h>
 #include <trace/events/kvm.h>
 #undef TRACE_INCLUDE_FILE
 #define CREATE_TRACE_POINTS
 #include "trace.h"
 
+#include <asm/debugreg.h>
 #include <asm/uaccess.h>
 #include <asm/msr.h>
 #include <asm/desc.h>
@@ -87,6 +89,25 @@ EXPORT_SYMBOL_GPL(kvm_x86_ops);
 int ignore_msrs = 0;
 module_param_named(ignore_msrs, ignore_msrs, bool, S_IRUGO | S_IWUSR);
 
+#define KVM_NR_SHARED_MSRS 16
+
+struct kvm_shared_msrs_global {
+	int nr;
+	struct kvm_shared_msr {
+		u32 msr;
+		u64 value;
+	} msrs[KVM_NR_SHARED_MSRS];
+};
+
+struct kvm_shared_msrs {
+	struct user_return_notifier urn;
+	bool registered;
+	u64 current_value[KVM_NR_SHARED_MSRS];
+};
+
+static struct kvm_shared_msrs_global __read_mostly shared_msrs_global;
+static DEFINE_PER_CPU(struct kvm_shared_msrs, shared_msrs);
+
 struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "pf_fixed", VCPU_STAT(pf_fixed) },
 	{ "pf_guest", VCPU_STAT(pf_guest) },
@@ -123,6 +144,72 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };
 
+static void kvm_on_user_return(struct user_return_notifier *urn)
+{
+	unsigned slot;
+	struct kvm_shared_msr *global;
+	struct kvm_shared_msrs *locals
+		= container_of(urn, struct kvm_shared_msrs, urn);
+
+	for (slot = 0; slot < shared_msrs_global.nr; ++slot) {
+		global = &shared_msrs_global.msrs[slot];
+		if (global->value != locals->current_value[slot]) {
+			wrmsrl(global->msr, global->value);
+			locals->current_value[slot] = global->value;
+		}
+	}
+	locals->registered = false;
+	user_return_notifier_unregister(urn);
+}
+
+void kvm_define_shared_msr(unsigned slot, u32 msr)
+{
+	int cpu;
+	u64 value;
+
+	if (slot >= shared_msrs_global.nr)
+		shared_msrs_global.nr = slot + 1;
+	shared_msrs_global.msrs[slot].msr = msr;
+	rdmsrl_safe(msr, &value);
+	shared_msrs_global.msrs[slot].value = value;
+	for_each_online_cpu(cpu)
+		per_cpu(shared_msrs, cpu).current_value[slot] = value;
+}
+EXPORT_SYMBOL_GPL(kvm_define_shared_msr);
+
+static void kvm_shared_msr_cpu_online(void)
+{
+	unsigned i;
+	struct kvm_shared_msrs *locals = &__get_cpu_var(shared_msrs);
+
+	for (i = 0; i < shared_msrs_global.nr; ++i)
+		locals->current_value[i] = shared_msrs_global.msrs[i].value;
+}
+
+void kvm_set_shared_msr(unsigned slot, u64 value, u64 mask)
+{
+	struct kvm_shared_msrs *smsr = &__get_cpu_var(shared_msrs);
+
+	if (((value ^ smsr->current_value[slot]) & mask) == 0)
+		return;
+	smsr->current_value[slot] = value;
+	wrmsrl(shared_msrs_global.msrs[slot].msr, value);
+	if (!smsr->registered) {
+		smsr->urn.on_user_return = kvm_on_user_return;
+		user_return_notifier_register(&smsr->urn);
+		smsr->registered = true;
+	}
+}
+EXPORT_SYMBOL_GPL(kvm_set_shared_msr);
+
+static void drop_user_return_notifiers(void *ignore)
+{
+	struct kvm_shared_msrs *smsr = &__get_cpu_var(shared_msrs);
+
+	if (smsr->registered)
+		kvm_on_user_return(&smsr->urn);
+}
+
 unsigned long segment_base(u16 selector)
 {
 	struct descriptor_table gdt;
@@ -484,16 +571,19 @@ static inline u32 bit(int bitno)
  * and KVM_SET_MSRS, and KVM_GET_MSR_INDEX_LIST.
  *
  * This list is modified at module load time to reflect the
- * capabilities of the host cpu.
+ * capabilities of the host cpu. This capabilities test skips MSRs that are
+ * kvm-specific. Those are put in the beginning of the list.
  */
+
+#define KVM_SAVE_MSRS_BEGIN	2
 static u32 msrs_to_save[] = {
+	MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
 	MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
 	MSR_K6_STAR,
 #ifdef CONFIG_X86_64
 	MSR_CSTAR, MSR_KERNEL_GS_BASE, MSR_SYSCALL_MASK, MSR_LSTAR,
 #endif
-	MSR_IA32_TSC, MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
-	MSR_IA32_PERF_STATUS, MSR_IA32_CR_PAT, MSR_VM_HSAVE_PA
+	MSR_IA32_TSC, MSR_IA32_PERF_STATUS, MSR_IA32_CR_PAT, MSR_VM_HSAVE_PA
 };
 
 static unsigned num_msrs_to_save;
@@ -677,7 +767,8 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
 	/* With all the info we got, fill in the values */
 
 	vcpu->hv_clock.system_time = ts.tv_nsec +
-				     (NSEC_PER_SEC * (u64)ts.tv_sec);
+				     (NSEC_PER_SEC * (u64)ts.tv_sec) + v->kvm->arch.kvmclock_offset;
+
 	/*
 	 * The interface expects us to write an even number signaling that the
 	 * update is finished. Since the guest won't see the intermediate
@@ -835,6 +926,38 @@ static int set_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 	return 0;
 }
 
+static int xen_hvm_config(struct kvm_vcpu *vcpu, u64 data)
+{
+	struct kvm *kvm = vcpu->kvm;
+	int lm = is_long_mode(vcpu);
+	u8 *blob_addr = lm ? (u8 *)(long)kvm->arch.xen_hvm_config.blob_addr_64
+		: (u8 *)(long)kvm->arch.xen_hvm_config.blob_addr_32;
+	u8 blob_size = lm ? kvm->arch.xen_hvm_config.blob_size_64
+		: kvm->arch.xen_hvm_config.blob_size_32;
+	u32 page_num = data & ~PAGE_MASK;
+	u64 page_addr = data & PAGE_MASK;
+	u8 *page;
+	int r;
+
+	r = -E2BIG;
+	if (page_num >= blob_size)
+		goto out;
+	r = -ENOMEM;
+	page = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!page)
+		goto out;
+	r = -EFAULT;
+	if (copy_from_user(page, blob_addr + (page_num * PAGE_SIZE), PAGE_SIZE))
+		goto out_free;
+	if (kvm_write_guest(kvm, page_addr, page, PAGE_SIZE))
+		goto out_free;
+	r = 0;
+out_free:
+	kfree(page);
+out:
+	return r;
+}
+
 int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 {
 	switch (msr) {
@@ -950,6 +1073,8 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 			"0x%x data 0x%llx\n", msr, data);
 		break;
 	default:
+		if (msr && (msr == vcpu->kvm->arch.xen_hvm_config.msr))
+			return xen_hvm_config(vcpu, data);
 		if (!ignore_msrs) {
 			pr_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n",
 				msr, data);
@@ -1224,6 +1349,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_PIT2:
 	case KVM_CAP_PIT_STATE2:
 	case KVM_CAP_SET_IDENTITY_MAP_ADDR:
+	case KVM_CAP_XEN_HVM:
+	case KVM_CAP_ADJUST_CLOCK:
+	case KVM_CAP_VCPU_EVENTS:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -1238,8 +1366,8 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_NR_MEMSLOTS:
 		r = KVM_MEMORY_SLOTS;
 		break;
-	case KVM_CAP_PV_MMU:
-		r = !tdp_enabled;
+	case KVM_CAP_PV_MMU:	/* obsolete */
+		r = 0;
 		break;
 	case KVM_CAP_IOMMU:
 		r = iommu_found();
@@ -1326,6 +1454,12 @@ out:
 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
 	kvm_x86_ops->vcpu_load(vcpu, cpu);
+	if (unlikely(per_cpu(cpu_tsc_khz, cpu) == 0)) {
+		unsigned long khz = cpufreq_quick_get(cpu);
+		if (!khz)
+			khz = tsc_khz;
+		per_cpu(cpu_tsc_khz, cpu) = khz;
+	}
 	kvm_request_guest_time_update(vcpu);
 }
 
@@ -1759,6 +1893,61 @@ static int kvm_vcpu_ioctl_x86_set_mce(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
+static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu,
+					       struct kvm_vcpu_events *events)
+{
+	vcpu_load(vcpu);
+
+	events->exception.injected = vcpu->arch.exception.pending;
+	events->exception.nr = vcpu->arch.exception.nr;
+	events->exception.has_error_code = vcpu->arch.exception.has_error_code;
+	events->exception.error_code = vcpu->arch.exception.error_code;
+
+	events->interrupt.injected = vcpu->arch.interrupt.pending;
+	events->interrupt.nr = vcpu->arch.interrupt.nr;
+	events->interrupt.soft = vcpu->arch.interrupt.soft;
+
+	events->nmi.injected = vcpu->arch.nmi_injected;
+	events->nmi.pending = vcpu->arch.nmi_pending;
+	events->nmi.masked = kvm_x86_ops->get_nmi_mask(vcpu);
+
+	events->sipi_vector = vcpu->arch.sipi_vector;
+
+	events->flags = 0;
+
+	vcpu_put(vcpu);
+}
+
+static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
+					      struct kvm_vcpu_events *events)
+{
+	if (events->flags)
+		return -EINVAL;
+
+	vcpu_load(vcpu);
+
+	vcpu->arch.exception.pending = events->exception.injected;
+	vcpu->arch.exception.nr = events->exception.nr;
+	vcpu->arch.exception.has_error_code = events->exception.has_error_code;
+	vcpu->arch.exception.error_code = events->exception.error_code;
+
+	vcpu->arch.interrupt.pending = events->interrupt.injected;
+	vcpu->arch.interrupt.nr = events->interrupt.nr;
+	vcpu->arch.interrupt.soft = events->interrupt.soft;
+	if (vcpu->arch.interrupt.pending && irqchip_in_kernel(vcpu->kvm))
+		kvm_pic_clear_isr_ack(vcpu->kvm);
+
+	vcpu->arch.nmi_injected = events->nmi.injected;
+	vcpu->arch.nmi_pending = events->nmi.pending;
+	kvm_x86_ops->set_nmi_mask(vcpu, events->nmi.masked);
+
+	vcpu->arch.sipi_vector = events->sipi_vector;
+
+	vcpu_put(vcpu);
+
+	return 0;
+}
+
 long kvm_arch_vcpu_ioctl(struct file *filp,
 			 unsigned int ioctl, unsigned long arg)
 {
@@ -1769,6 +1958,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 
 	switch (ioctl) {
 	case KVM_GET_LAPIC: {
+		r = -EINVAL;
+		if (!vcpu->arch.apic)
+			goto out;
 		lapic = kzalloc(sizeof(struct kvm_lapic_state), GFP_KERNEL);
 
 		r = -ENOMEM;
@@ -1784,6 +1976,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		break;
 	}
 	case KVM_SET_LAPIC: {
+		r = -EINVAL;
+		if (!vcpu->arch.apic)
+			goto out;
 		lapic = kmalloc(sizeof(struct kvm_lapic_state), GFP_KERNEL);
 		r = -ENOMEM;
 		if (!lapic)
@@ -1910,6 +2105,27 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = kvm_vcpu_ioctl_x86_set_mce(vcpu, &mce);
 		break;
 	}
+	case KVM_GET_VCPU_EVENTS: {
+		struct kvm_vcpu_events events;
+
+		kvm_vcpu_ioctl_x86_get_vcpu_events(vcpu, &events);
+
+		r = -EFAULT;
+		if (copy_to_user(argp, &events, sizeof(struct kvm_vcpu_events)))
+			break;
+		r = 0;
+		break;
+	}
+	case KVM_SET_VCPU_EVENTS: {
+		struct kvm_vcpu_events events;
+
+		r = -EFAULT;
+		if (copy_from_user(&events, argp, sizeof(struct kvm_vcpu_events)))
+			break;
+
+		r = kvm_vcpu_ioctl_x86_set_vcpu_events(vcpu, &events);
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
@@ -2038,9 +2254,7 @@ static int kvm_vm_ioctl_get_irqchip(struct kvm *kvm, struct kvm_irqchip *chip)
 			sizeof(struct kvm_pic_state));
 		break;
 	case KVM_IRQCHIP_IOAPIC:
-		memcpy(&chip->chip.ioapic,
-			ioapic_irqchip(kvm),
-			sizeof(struct kvm_ioapic_state));
+		r = kvm_get_ioapic(kvm, &chip->chip.ioapic);
 		break;
 	default:
 		r = -EINVAL;
@@ -2070,11 +2284,7 @@ static int kvm_vm_ioctl_set_irqchip(struct kvm *kvm, struct kvm_irqchip *chip)
 		spin_unlock(&pic_irqchip(kvm)->lock);
 		break;
 	case KVM_IRQCHIP_IOAPIC:
-		mutex_lock(&kvm->irq_lock);
-		memcpy(ioapic_irqchip(kvm),
-			&chip->chip.ioapic,
-			sizeof(struct kvm_ioapic_state));
-		mutex_unlock(&kvm->irq_lock);
+		r = kvm_set_ioapic(kvm, &chip->chip.ioapic);
 		break;
 	default:
 		r = -EINVAL;
@@ -2182,7 +2392,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 {
 	struct kvm *kvm = filp->private_data;
 	void __user *argp = (void __user *)arg;
-	int r = -EINVAL;
+	int r = -ENOTTY;
 	/*
 	 * This union makes it completely explicit to gcc-3.x
 	 * that these two variables' stack usage should be
@@ -2244,25 +2454,39 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		if (r)
 			goto out;
 		break;
-	case KVM_CREATE_IRQCHIP:
+	case KVM_CREATE_IRQCHIP: {
+		struct kvm_pic *vpic;
+
+		mutex_lock(&kvm->lock);
+		r = -EEXIST;
+		if (kvm->arch.vpic)
+			goto create_irqchip_unlock;
 		r = -ENOMEM;
-		kvm->arch.vpic = kvm_create_pic(kvm);
-		if (kvm->arch.vpic) {
+		vpic = kvm_create_pic(kvm);
+		if (vpic) {
 			r = kvm_ioapic_init(kvm);
 			if (r) {
-				kfree(kvm->arch.vpic);
-				kvm->arch.vpic = NULL;
-				goto out;
+				kfree(vpic);
+				goto create_irqchip_unlock;
 			}
 		} else
-			goto out;
+			goto create_irqchip_unlock;
+		smp_wmb();
+		kvm->arch.vpic = vpic;
+		smp_wmb();
 		r = kvm_setup_default_irq_routing(kvm);
 		if (r) {
+			mutex_lock(&kvm->irq_lock);
 			kfree(kvm->arch.vpic);
 			kfree(kvm->arch.vioapic);
-			goto out;
+			kvm->arch.vpic = NULL;
+			kvm->arch.vioapic = NULL;
+			mutex_unlock(&kvm->irq_lock);
 		}
+	create_irqchip_unlock:
+		mutex_unlock(&kvm->lock);
 		break;
+	}
 	case KVM_CREATE_PIT:
 		u.pit_config.flags = KVM_PIT_SPEAKER_DUMMY;
 		goto create_pit;
@@ -2292,10 +2516,8 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		if (irqchip_in_kernel(kvm)) {
 			__s32 status;
-			mutex_lock(&kvm->irq_lock);
 			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
 					irq_event.irq, irq_event.level);
-			mutex_unlock(&kvm->irq_lock);
 			if (ioctl == KVM_IRQ_LINE_STATUS) {
 				irq_event.status = status;
 				if (copy_to_user(argp, &irq_event,
@@ -2421,6 +2643,55 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = 0;
 		break;
 	}
+	case KVM_XEN_HVM_CONFIG: {
+		r = -EFAULT;
+		if (copy_from_user(&kvm->arch.xen_hvm_config, argp,
+				   sizeof(struct kvm_xen_hvm_config)))
+			goto out;
+		r = -EINVAL;
+		if (kvm->arch.xen_hvm_config.flags)
+			goto out;
+		r = 0;
+		break;
+	}
+	case KVM_SET_CLOCK: {
+		struct timespec now;
+		struct kvm_clock_data user_ns;
+		u64 now_ns;
+		s64 delta;
+
+		r = -EFAULT;
+		if (copy_from_user(&user_ns, argp, sizeof(user_ns)))
+			goto out;
+
+		r = -EINVAL;
+		if (user_ns.flags)
+			goto out;
+
+		r = 0;
+		ktime_get_ts(&now);
+		now_ns = timespec_to_ns(&now);
+		delta = user_ns.clock - now_ns;
+		kvm->arch.kvmclock_offset = delta;
+		break;
+	}
+	case KVM_GET_CLOCK: {
+		struct timespec now;
+		struct kvm_clock_data user_ns;
+		u64 now_ns;
+
+		ktime_get_ts(&now);
+		now_ns = timespec_to_ns(&now);
+		user_ns.clock = kvm->arch.kvmclock_offset + now_ns;
+		user_ns.flags = 0;
+
+		r = -EFAULT;
+		if (copy_to_user(argp, &user_ns, sizeof(user_ns)))
+			goto out;
+		r = 0;
+		break;
+	}
+
 	default:
 		;
 	}
@@ -2433,7 +2704,8 @@ static void kvm_init_msr_list(void)
 	u32 dummy[2];
 	unsigned i, j;
 
-	for (i = j = 0; i < ARRAY_SIZE(msrs_to_save); i++) {
+	/* skip the first msrs in the list. KVM-specific */
+	for (i = j = KVM_SAVE_MSRS_BEGIN; i < ARRAY_SIZE(msrs_to_save); i++) {
 		if (rdmsr_safe(msrs_to_save[i], &dummy[0], &dummy[1]) < 0)
 			continue;
 		if (j < i)
@@ -2757,13 +3029,13 @@ static void cache_all_regs(struct kvm_vcpu *vcpu)
 }
 
 int emulate_instruction(struct kvm_vcpu *vcpu,
-			struct kvm_run *run,
 			unsigned long cr2,
 			u16 error_code,
 			int emulation_type)
 {
 	int r, shadow_mask;
 	struct decode_cache *c;
+	struct kvm_run *run = vcpu->run;
 
 	kvm_clear_exception_queue(vcpu);
 	vcpu->arch.mmio_fault_cr2 = cr2;
@@ -2783,7 +3055,7 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 		kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
 
 		vcpu->arch.emulate_ctxt.vcpu = vcpu;
-		vcpu->arch.emulate_ctxt.eflags = kvm_x86_ops->get_rflags(vcpu);
+		vcpu->arch.emulate_ctxt.eflags = kvm_get_rflags(vcpu);
 		vcpu->arch.emulate_ctxt.mode =
 			(vcpu->arch.emulate_ctxt.eflags & X86_EFLAGS_VM)
 			? X86EMUL_MODE_REAL : cs_l
@@ -2861,7 +3133,7 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 		return EMULATE_DO_MMIO;
 	}
 
-	kvm_x86_ops->set_rflags(vcpu, vcpu->arch.emulate_ctxt.eflags);
+	kvm_set_rflags(vcpu, vcpu->arch.emulate_ctxt.eflags);
 
 	if (vcpu->mmio_is_write) {
 		vcpu->mmio_needed = 0;
@@ -2969,8 +3241,7 @@ static int pio_string_write(struct kvm_vcpu *vcpu)
 	return r;
 }
 
-int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
-		  int size, unsigned port)
+int kvm_emulate_pio(struct kvm_vcpu *vcpu, int in, int size, unsigned port)
 {
 	unsigned long val;
 
@@ -2999,7 +3270,7 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 }
 EXPORT_SYMBOL_GPL(kvm_emulate_pio);
 
-int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
+int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, int in,
 		  int size, unsigned long count, int down,
 		  gva_t address, int rep, unsigned port)
 {
@@ -3072,9 +3343,6 @@ static void bounce_off(void *info)
 	/* nothing */
 }
 
-static unsigned int  ref_freq;
-static unsigned long tsc_khz_ref;
-
 static int kvmclock_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 				     void *data)
 {
@@ -3083,14 +3351,11 @@ static int kvmclock_cpufreq_notifier(struct notifier_block *nb, unsigned long va
 	struct kvm_vcpu *vcpu;
 	int i, send_ipi = 0;
 
-	if (!ref_freq)
-		ref_freq = freq->old;
-
 	if (val == CPUFREQ_PRECHANGE && freq->old > freq->new)
 		return 0;
 	if (val == CPUFREQ_POSTCHANGE && freq->old < freq->new)
 		return 0;
-	per_cpu(cpu_tsc_khz, freq->cpu) = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
+	per_cpu(cpu_tsc_khz, freq->cpu) = freq->new;
 
 	spin_lock(&kvm_lock);
 	list_for_each_entry(kvm, &vm_list, vm_list) {
@@ -3127,9 +3392,28 @@ static struct notifier_block kvmclock_cpufreq_notifier_block = {
         .notifier_call  = kvmclock_cpufreq_notifier
 };
 
+static void kvm_timer_init(void)
+{
+	int cpu;
+
+	if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) {
+		cpufreq_register_notifier(&kvmclock_cpufreq_notifier_block,
+					  CPUFREQ_TRANSITION_NOTIFIER);
+		for_each_online_cpu(cpu) {
+			unsigned long khz = cpufreq_get(cpu);
+			if (!khz)
+				khz = tsc_khz;
+			per_cpu(cpu_tsc_khz, cpu) = khz;
+		}
+	} else {
+		for_each_possible_cpu(cpu)
+			per_cpu(cpu_tsc_khz, cpu) = tsc_khz;
+	}
+}
+
 int kvm_arch_init(void *opaque)
 {
-	int r, cpu;
+	int r;
 	struct kvm_x86_ops *ops = (struct kvm_x86_ops *)opaque;
 
 	if (kvm_x86_ops) {
@@ -3161,13 +3445,7 @@ int kvm_arch_init(void *opaque)
 	kvm_mmu_set_mask_ptes(PT_USER_MASK, PT_ACCESSED_MASK,
 			PT_DIRTY_MASK, PT64_NX_MASK, 0);
 
-	for_each_possible_cpu(cpu)
-		per_cpu(cpu_tsc_khz, cpu) = tsc_khz;
-	if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) {
-		tsc_khz_ref = tsc_khz;
-		cpufreq_register_notifier(&kvmclock_cpufreq_notifier_block,
-					  CPUFREQ_TRANSITION_NOTIFIER);
-	}
+	kvm_timer_init();
 
 	return 0;
 
@@ -3295,7 +3573,7 @@ void realmode_lmsw(struct kvm_vcpu *vcpu, unsigned long msw,
 		   unsigned long *rflags)
 {
 	kvm_lmsw(vcpu, msw);
-	*rflags = kvm_x86_ops->get_rflags(vcpu);
+	*rflags = kvm_get_rflags(vcpu);
 }
 
 unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr)
@@ -3333,7 +3611,7 @@ void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long val,
 	switch (cr) {
 	case 0:
 		kvm_set_cr0(vcpu, mk_cr_64(vcpu->arch.cr0, val));
-		*rflags = kvm_x86_ops->get_rflags(vcpu);
+		*rflags = kvm_get_rflags(vcpu);
 		break;
 	case 2:
 		vcpu->arch.cr2 = val;
@@ -3453,18 +3731,18 @@ EXPORT_SYMBOL_GPL(kvm_emulate_cpuid);
  *
  * No need to exit to userspace if we already have an interrupt queued.
  */
-static int dm_request_for_irq_injection(struct kvm_vcpu *vcpu,
-					  struct kvm_run *kvm_run)
+static int dm_request_for_irq_injection(struct kvm_vcpu *vcpu)
 {
 	return (!irqchip_in_kernel(vcpu->kvm) && !kvm_cpu_has_interrupt(vcpu) &&
-		kvm_run->request_interrupt_window &&
+		vcpu->run->request_interrupt_window &&
 		kvm_arch_interrupt_allowed(vcpu));
 }
 
-static void post_kvm_run_save(struct kvm_vcpu *vcpu,
-			      struct kvm_run *kvm_run)
+static void post_kvm_run_save(struct kvm_vcpu *vcpu)
 {
-	kvm_run->if_flag = (kvm_x86_ops->get_rflags(vcpu) & X86_EFLAGS_IF) != 0;
+	struct kvm_run *kvm_run = vcpu->run;
+
+	kvm_run->if_flag = (kvm_get_rflags(vcpu) & X86_EFLAGS_IF) != 0;
 	kvm_run->cr8 = kvm_get_cr8(vcpu);
 	kvm_run->apic_base = kvm_get_apic_base(vcpu);
 	if (irqchip_in_kernel(vcpu->kvm))
@@ -3525,7 +3803,7 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu)
 	kvm_x86_ops->update_cr8_intercept(vcpu, tpr, max_irr);
 }
 
-static void inject_pending_event(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static void inject_pending_event(struct kvm_vcpu *vcpu)
 {
 	/* try to reinject previous events if any */
 	if (vcpu->arch.exception.pending) {
@@ -3561,11 +3839,11 @@ static void inject_pending_event(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	}
 }
 
-static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 {
 	int r;
 	bool req_int_win = !irqchip_in_kernel(vcpu->kvm) &&
-		kvm_run->request_interrupt_window;
+		vcpu->run->request_interrupt_window;
 
 	if (vcpu->requests)
 		if (test_and_clear_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
@@ -3586,12 +3864,12 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 			kvm_x86_ops->tlb_flush(vcpu);
 		if (test_and_clear_bit(KVM_REQ_REPORT_TPR_ACCESS,
 				       &vcpu->requests)) {
-			kvm_run->exit_reason = KVM_EXIT_TPR_ACCESS;
+			vcpu->run->exit_reason = KVM_EXIT_TPR_ACCESS;
 			r = 0;
 			goto out;
 		}
 		if (test_and_clear_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests)) {
-			kvm_run->exit_reason = KVM_EXIT_SHUTDOWN;
+			vcpu->run->exit_reason = KVM_EXIT_SHUTDOWN;
 			r = 0;
 			goto out;
 		}
@@ -3615,7 +3893,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		goto out;
 	}
 
-	inject_pending_event(vcpu, kvm_run);
+	inject_pending_event(vcpu);
 
 	/* enable NMI/IRQ window open exits if needed */
 	if (vcpu->arch.nmi_pending)
@@ -3641,16 +3919,17 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	}
 
 	trace_kvm_entry(vcpu->vcpu_id);
-	kvm_x86_ops->run(vcpu, kvm_run);
+	kvm_x86_ops->run(vcpu);
 
-	if (unlikely(vcpu->arch.switch_db_regs || test_thread_flag(TIF_DEBUG))) {
-		set_debugreg(current->thread.debugreg0, 0);
-		set_debugreg(current->thread.debugreg1, 1);
-		set_debugreg(current->thread.debugreg2, 2);
-		set_debugreg(current->thread.debugreg3, 3);
-		set_debugreg(current->thread.debugreg6, 6);
-		set_debugreg(current->thread.debugreg7, 7);
-	}
+	/*
+	 * If the guest has used debug registers, at least dr7
+	 * will be disabled while returning to the host.
+	 * If we don't have active breakpoints in the host, we don't
+	 * care about the messed up debug address registers. But if
+	 * we have some of them active, restore the old state.
+	 */
+	if (hw_breakpoint_active())
+		hw_breakpoint_restore();
 
 	set_bit(KVM_REQ_KICK, &vcpu->requests);
 	local_irq_enable();
@@ -3682,13 +3961,13 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	kvm_lapic_sync_from_vapic(vcpu);
 
-	r = kvm_x86_ops->handle_exit(kvm_run, vcpu);
+	r = kvm_x86_ops->handle_exit(vcpu);
 out:
 	return r;
 }
 
 
-static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int __vcpu_run(struct kvm_vcpu *vcpu)
 {
 	int r;
 
@@ -3708,7 +3987,7 @@ static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	r = 1;
 	while (r > 0) {
 		if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE)
-			r = vcpu_enter_guest(vcpu, kvm_run);
+			r = vcpu_enter_guest(vcpu);
 		else {
 			up_read(&vcpu->kvm->slots_lock);
 			kvm_vcpu_block(vcpu);
@@ -3736,14 +4015,14 @@ static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		if (kvm_cpu_has_pending_timer(vcpu))
 			kvm_inject_pending_timer_irqs(vcpu);
 
-		if (dm_request_for_irq_injection(vcpu, kvm_run)) {
+		if (dm_request_for_irq_injection(vcpu)) {
 			r = -EINTR;
-			kvm_run->exit_reason = KVM_EXIT_INTR;
+			vcpu->run->exit_reason = KVM_EXIT_INTR;
 			++vcpu->stat.request_irq_exits;
 		}
 		if (signal_pending(current)) {
 			r = -EINTR;
-			kvm_run->exit_reason = KVM_EXIT_INTR;
+			vcpu->run->exit_reason = KVM_EXIT_INTR;
 			++vcpu->stat.signal_exits;
 		}
 		if (need_resched()) {
@@ -3754,7 +4033,7 @@ static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	}
 
 	up_read(&vcpu->kvm->slots_lock);
-	post_kvm_run_save(vcpu, kvm_run);
+	post_kvm_run_save(vcpu);
 
 	vapic_exit(vcpu);
 
@@ -3787,15 +4066,13 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		if (r)
 			goto out;
 	}
-#if CONFIG_HAS_IOMEM
 	if (vcpu->mmio_needed) {
 		memcpy(vcpu->mmio_data, kvm_run->mmio.data, 8);
 		vcpu->mmio_read_completed = 1;
 		vcpu->mmio_needed = 0;
 
 		down_read(&vcpu->kvm->slots_lock);
-		r = emulate_instruction(vcpu, kvm_run,
-					vcpu->arch.mmio_fault_cr2, 0,
+		r = emulate_instruction(vcpu, vcpu->arch.mmio_fault_cr2, 0,
 					EMULTYPE_NO_DECODE);
 		up_read(&vcpu->kvm->slots_lock);
 		if (r == EMULATE_DO_MMIO) {
@@ -3806,12 +4083,11 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 			goto out;
 		}
 	}
-#endif
 	if (kvm_run->exit_reason == KVM_EXIT_HYPERCALL)
 		kvm_register_write(vcpu, VCPU_REGS_RAX,
 				     kvm_run->hypercall.ret);
 
-	r = __vcpu_run(vcpu, kvm_run);
+	r = __vcpu_run(vcpu);
 
 out:
 	if (vcpu->sigset_active)
@@ -3845,13 +4121,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 #endif
 
 	regs->rip = kvm_rip_read(vcpu);
-	regs->rflags = kvm_x86_ops->get_rflags(vcpu);
-
-	/*
-	 * Don't leak debug flags in case they were set for guest debugging
-	 */
-	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
-		regs->rflags &= ~(X86_EFLAGS_TF | X86_EFLAGS_RF);
+	regs->rflags = kvm_get_rflags(vcpu);
 
 	vcpu_put(vcpu);
 
@@ -3879,12 +4149,10 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	kvm_register_write(vcpu, VCPU_REGS_R13, regs->r13);
 	kvm_register_write(vcpu, VCPU_REGS_R14, regs->r14);
 	kvm_register_write(vcpu, VCPU_REGS_R15, regs->r15);
-
 #endif
 
 	kvm_rip_write(vcpu, regs->rip);
-	kvm_x86_ops->set_rflags(vcpu, regs->rflags);
-
+	kvm_set_rflags(vcpu, regs->rflags);
 
 	vcpu->arch.exception.pending = false;
 
@@ -4103,7 +4371,7 @@ static int is_vm86_segment(struct kvm_vcpu *vcpu, int seg)
 {
 	return (seg != VCPU_SREG_LDTR) &&
 		(seg != VCPU_SREG_TR) &&
-		(kvm_x86_ops->get_rflags(vcpu) & X86_EFLAGS_VM);
+		(kvm_get_rflags(vcpu) & X86_EFLAGS_VM);
 }
 
 int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
@@ -4131,7 +4399,7 @@ static void save_state_to_tss32(struct kvm_vcpu *vcpu,
 {
 	tss->cr3 = vcpu->arch.cr3;
 	tss->eip = kvm_rip_read(vcpu);
-	tss->eflags = kvm_x86_ops->get_rflags(vcpu);
+	tss->eflags = kvm_get_rflags(vcpu);
 	tss->eax = kvm_register_read(vcpu, VCPU_REGS_RAX);
 	tss->ecx = kvm_register_read(vcpu, VCPU_REGS_RCX);
 	tss->edx = kvm_register_read(vcpu, VCPU_REGS_RDX);
@@ -4155,7 +4423,7 @@ static int load_state_from_tss32(struct kvm_vcpu *vcpu,
 	kvm_set_cr3(vcpu, tss->cr3);
 
 	kvm_rip_write(vcpu, tss->eip);
-	kvm_x86_ops->set_rflags(vcpu, tss->eflags | 2);
+	kvm_set_rflags(vcpu, tss->eflags | 2);
 
 	kvm_register_write(vcpu, VCPU_REGS_RAX, tss->eax);
 	kvm_register_write(vcpu, VCPU_REGS_RCX, tss->ecx);
@@ -4193,7 +4461,7 @@ static void save_state_to_tss16(struct kvm_vcpu *vcpu,
 				struct tss_segment_16 *tss)
 {
 	tss->ip = kvm_rip_read(vcpu);
-	tss->flag = kvm_x86_ops->get_rflags(vcpu);
+	tss->flag = kvm_get_rflags(vcpu);
 	tss->ax = kvm_register_read(vcpu, VCPU_REGS_RAX);
 	tss->cx = kvm_register_read(vcpu, VCPU_REGS_RCX);
 	tss->dx = kvm_register_read(vcpu, VCPU_REGS_RDX);
@@ -4208,14 +4476,13 @@ static void save_state_to_tss16(struct kvm_vcpu *vcpu,
 	tss->ss = get_segment_selector(vcpu, VCPU_SREG_SS);
 	tss->ds = get_segment_selector(vcpu, VCPU_SREG_DS);
 	tss->ldt = get_segment_selector(vcpu, VCPU_SREG_LDTR);
-	tss->prev_task_link = get_segment_selector(vcpu, VCPU_SREG_TR);
 }
 
 static int load_state_from_tss16(struct kvm_vcpu *vcpu,
 				 struct tss_segment_16 *tss)
 {
 	kvm_rip_write(vcpu, tss->ip);
-	kvm_x86_ops->set_rflags(vcpu, tss->flag | 2);
+	kvm_set_rflags(vcpu, tss->flag | 2);
 	kvm_register_write(vcpu, VCPU_REGS_RAX, tss->ax);
 	kvm_register_write(vcpu, VCPU_REGS_RCX, tss->cx);
 	kvm_register_write(vcpu, VCPU_REGS_RDX, tss->dx);
@@ -4361,8 +4628,8 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	}
 
 	if (reason == TASK_SWITCH_IRET) {
-		u32 eflags = kvm_x86_ops->get_rflags(vcpu);
-		kvm_x86_ops->set_rflags(vcpu, eflags & ~X86_EFLAGS_NT);
+		u32 eflags = kvm_get_rflags(vcpu);
+		kvm_set_rflags(vcpu, eflags & ~X86_EFLAGS_NT);
 	}
 
 	/* set back link to prev task only if NT bit is set in eflags
@@ -4370,11 +4637,6 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	if (reason != TASK_SWITCH_CALL && reason != TASK_SWITCH_GATE)
 		old_tss_sel = 0xffff;
 
-	/* set back link to prev task only if NT bit is set in eflags
-	   note that old_tss_sel is not used afetr this point */
-	if (reason != TASK_SWITCH_CALL && reason != TASK_SWITCH_GATE)
-		old_tss_sel = 0xffff;
-
 	if (nseg_desc.type & 8)
 		ret = kvm_task_switch_32(vcpu, tss_selector, old_tss_sel,
 					 old_tss_base, &nseg_desc);
@@ -4383,8 +4645,8 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 					 old_tss_base, &nseg_desc);
 
 	if (reason == TASK_SWITCH_CALL || reason == TASK_SWITCH_GATE) {
-		u32 eflags = kvm_x86_ops->get_rflags(vcpu);
-		kvm_x86_ops->set_rflags(vcpu, eflags | X86_EFLAGS_NT);
+		u32 eflags = kvm_get_rflags(vcpu);
+		kvm_set_rflags(vcpu, eflags | X86_EFLAGS_NT);
 	}
 
 	if (reason != TASK_SWITCH_IRET) {
@@ -4436,8 +4698,10 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 
 	mmu_reset_needed |= vcpu->arch.cr4 != sregs->cr4;
 	kvm_x86_ops->set_cr4(vcpu, sregs->cr4);
-	if (!is_long_mode(vcpu) && is_pae(vcpu))
+	if (!is_long_mode(vcpu) && is_pae(vcpu)) {
 		load_pdptrs(vcpu, vcpu->arch.cr3);
+		mmu_reset_needed = 1;
+	}
 
 	if (mmu_reset_needed)
 		kvm_mmu_reset_context(vcpu);
@@ -4478,12 +4742,32 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 					struct kvm_guest_debug *dbg)
 {
+	unsigned long rflags;
 	int i, r;
 
 	vcpu_load(vcpu);
 
-	if ((dbg->control & (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW_BP)) ==
-	    (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW_BP)) {
+	if (dbg->control & (KVM_GUESTDBG_INJECT_DB | KVM_GUESTDBG_INJECT_BP)) {
+		r = -EBUSY;
+		if (vcpu->arch.exception.pending)
+			goto unlock_out;
+		if (dbg->control & KVM_GUESTDBG_INJECT_DB)
+			kvm_queue_exception(vcpu, DB_VECTOR);
+		else
+			kvm_queue_exception(vcpu, BP_VECTOR);
+	}
+
+	/*
+	 * Read rflags as long as potentially injected trace flags are still
+	 * filtered out.
+	 */
+	rflags = kvm_get_rflags(vcpu);
+
+	vcpu->guest_debug = dbg->control;
+	if (!(vcpu->guest_debug & KVM_GUESTDBG_ENABLE))
+		vcpu->guest_debug = 0;
+
+	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) {
 		for (i = 0; i < KVM_NR_DB_REGS; ++i)
 			vcpu->arch.eff_db[i] = dbg->arch.debugreg[i];
 		vcpu->arch.switch_db_regs =
@@ -4494,13 +4778,23 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 		vcpu->arch.switch_db_regs = (vcpu->arch.dr7 & DR7_BP_EN_MASK);
 	}
 
-	r = kvm_x86_ops->set_guest_debug(vcpu, dbg);
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
+		vcpu->arch.singlestep_cs =
+			get_segment_selector(vcpu, VCPU_SREG_CS);
+		vcpu->arch.singlestep_rip = kvm_rip_read(vcpu);
+	}
+
+	/*
+	 * Trigger an rflags update that will inject or remove the trace
+	 * flags.
+	 */
+	kvm_set_rflags(vcpu, rflags);
+
+	kvm_x86_ops->set_guest_debug(vcpu, dbg);
 
-	if (dbg->control & KVM_GUESTDBG_INJECT_DB)
-		kvm_queue_exception(vcpu, DB_VECTOR);
-	else if (dbg->control & KVM_GUESTDBG_INJECT_BP)
-		kvm_queue_exception(vcpu, BP_VECTOR);
+	r = 0;
 
+unlock_out:
 	vcpu_put(vcpu);
 
 	return r;
@@ -4701,14 +4995,26 @@ int kvm_arch_vcpu_reset(struct kvm_vcpu *vcpu)
 	return kvm_x86_ops->vcpu_reset(vcpu);
 }
 
-void kvm_arch_hardware_enable(void *garbage)
+int kvm_arch_hardware_enable(void *garbage)
 {
-	kvm_x86_ops->hardware_enable(garbage);
+	/*
+	 * Since this may be called from a hotplug notifcation,
+	 * we can't get the CPU frequency directly.
+	 */
+	if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) {
+		int cpu = raw_smp_processor_id();
+		per_cpu(cpu_tsc_khz, cpu) = 0;
+	}
+
+	kvm_shared_msr_cpu_online();
+
+	return kvm_x86_ops->hardware_enable(garbage);
 }
 
 void kvm_arch_hardware_disable(void *garbage)
 {
 	kvm_x86_ops->hardware_disable(garbage);
+	drop_user_return_notifiers(garbage);
 }
 
 int kvm_arch_hardware_setup(void)
@@ -4946,8 +5252,36 @@ int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
 	return kvm_x86_ops->interrupt_allowed(vcpu);
 }
 
+unsigned long kvm_get_rflags(struct kvm_vcpu *vcpu)
+{
+	unsigned long rflags;
+
+	rflags = kvm_x86_ops->get_rflags(vcpu);
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+		rflags &= ~(unsigned long)(X86_EFLAGS_TF | X86_EFLAGS_RF);
+	return rflags;
+}
+EXPORT_SYMBOL_GPL(kvm_get_rflags);
+
+void kvm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
+{
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP &&
+	    vcpu->arch.singlestep_cs ==
+			get_segment_selector(vcpu, VCPU_SREG_CS) &&
+	    vcpu->arch.singlestep_rip == kvm_rip_read(vcpu))
+		rflags |= X86_EFLAGS_TF | X86_EFLAGS_RF;
+	kvm_x86_ops->set_rflags(vcpu, rflags);
+}
+EXPORT_SYMBOL_GPL(kvm_set_rflags);
+
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_exit);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_inj_virq);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_page_fault);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_msr);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_cr);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_nested_vmrun);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_nested_vmexit);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_nested_vmexit_inject);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_nested_intr_vmexit);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_invlpga);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_skinit);
diff --git a/arch/x86/lib/.gitignore b/arch/x86/lib/.gitignore
new file mode 100644
index 000000000000..8df89f0a3fe6
--- /dev/null
+++ b/arch/x86/lib/.gitignore
@@ -0,0 +1 @@
+inat-tables.c
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 85f5db95c60f..45b20e486c2f 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -2,12 +2,25 @@
 # Makefile for x86 specific library files.
 #
 
+inat_tables_script = $(srctree)/arch/x86/tools/gen-insn-attr-x86.awk
+inat_tables_maps = $(srctree)/arch/x86/lib/x86-opcode-map.txt
+quiet_cmd_inat_tables = GEN     $@
+      cmd_inat_tables = $(AWK) -f $(inat_tables_script) $(inat_tables_maps) > $@ || rm -f $@
+
+$(obj)/inat-tables.c: $(inat_tables_script) $(inat_tables_maps)
+	$(call cmd,inat_tables)
+
+$(obj)/inat.o: $(obj)/inat-tables.c
+
+clean-files := inat-tables.c
+
 obj-$(CONFIG_SMP) := msr.o
 
 lib-y := delay.o
 lib-y += thunk_$(BITS).o
 lib-y += usercopy_$(BITS).o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
+lib-$(CONFIG_KPROBES) += insn.o inat.o
 
 obj-y += msr-reg.o msr-reg-export.o
 
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 6ba0f7bb85ea..cf889d4e076a 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -65,7 +65,7 @@
 	.endm
 
 /* Standard copy_to_user with segment limit checking */
-ENTRY(copy_to_user)
+ENTRY(_copy_to_user)
 	CFI_STARTPROC
 	GET_THREAD_INFO(%rax)
 	movq %rdi,%rcx
@@ -75,10 +75,10 @@ ENTRY(copy_to_user)
 	jae bad_to_user
 	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
 	CFI_ENDPROC
-ENDPROC(copy_to_user)
+ENDPROC(_copy_to_user)
 
 /* Standard copy_from_user with segment limit checking */
-ENTRY(copy_from_user)
+ENTRY(_copy_from_user)
 	CFI_STARTPROC
 	GET_THREAD_INFO(%rax)
 	movq %rsi,%rcx
@@ -88,7 +88,7 @@ ENTRY(copy_from_user)
 	jae bad_from_user
 	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
 	CFI_ENDPROC
-ENDPROC(copy_from_user)
+ENDPROC(_copy_from_user)
 
 ENTRY(copy_user_generic)
 	CFI_STARTPROC
@@ -96,12 +96,6 @@ ENTRY(copy_user_generic)
 	CFI_ENDPROC
 ENDPROC(copy_user_generic)
 
-ENTRY(__copy_from_user_inatomic)
-	CFI_STARTPROC
-	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
-	CFI_ENDPROC
-ENDPROC(__copy_from_user_inatomic)
-
 	.section .fixup,"ax"
 	/* must zero dest */
 ENTRY(bad_from_user)
diff --git a/arch/x86/lib/inat.c b/arch/x86/lib/inat.c
new file mode 100644
index 000000000000..46fc4ee09fc4
--- /dev/null
+++ b/arch/x86/lib/inat.c
@@ -0,0 +1,90 @@
+/*
+ * x86 instruction attribute tables
+ *
+ * Written by Masami Hiramatsu <mhiramat@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#include <asm/insn.h>
+
+/* Attribute tables are generated from opcode map */
+#include "inat-tables.c"
+
+/* Attribute search APIs */
+insn_attr_t inat_get_opcode_attribute(insn_byte_t opcode)
+{
+	return inat_primary_table[opcode];
+}
+
+insn_attr_t inat_get_escape_attribute(insn_byte_t opcode, insn_byte_t last_pfx,
+				      insn_attr_t esc_attr)
+{
+	const insn_attr_t *table;
+	insn_attr_t lpfx_attr;
+	int n, m = 0;
+
+	n = inat_escape_id(esc_attr);
+	if (last_pfx) {
+		lpfx_attr = inat_get_opcode_attribute(last_pfx);
+		m = inat_last_prefix_id(lpfx_attr);
+	}
+	table = inat_escape_tables[n][0];
+	if (!table)
+		return 0;
+	if (inat_has_variant(table[opcode]) && m) {
+		table = inat_escape_tables[n][m];
+		if (!table)
+			return 0;
+	}
+	return table[opcode];
+}
+
+insn_attr_t inat_get_group_attribute(insn_byte_t modrm, insn_byte_t last_pfx,
+				     insn_attr_t grp_attr)
+{
+	const insn_attr_t *table;
+	insn_attr_t lpfx_attr;
+	int n, m = 0;
+
+	n = inat_group_id(grp_attr);
+	if (last_pfx) {
+		lpfx_attr = inat_get_opcode_attribute(last_pfx);
+		m = inat_last_prefix_id(lpfx_attr);
+	}
+	table = inat_group_tables[n][0];
+	if (!table)
+		return inat_group_common_attribute(grp_attr);
+	if (inat_has_variant(table[X86_MODRM_REG(modrm)]) && m) {
+		table = inat_group_tables[n][m];
+		if (!table)
+			return inat_group_common_attribute(grp_attr);
+	}
+	return table[X86_MODRM_REG(modrm)] |
+	       inat_group_common_attribute(grp_attr);
+}
+
+insn_attr_t inat_get_avx_attribute(insn_byte_t opcode, insn_byte_t vex_m,
+				   insn_byte_t vex_p)
+{
+	const insn_attr_t *table;
+	if (vex_m > X86_VEX_M_MAX || vex_p > INAT_LSTPFX_MAX)
+		return 0;
+	table = inat_avx_tables[vex_m][vex_p];
+	if (!table)
+		return 0;
+	return table[opcode];
+}
+
diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c
new file mode 100644
index 000000000000..9f33b984d0ef
--- /dev/null
+++ b/arch/x86/lib/insn.c
@@ -0,0 +1,516 @@
+/*
+ * x86 instruction analysis
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004, 2009
+ */
+
+#include <linux/string.h>
+#include <asm/inat.h>
+#include <asm/insn.h>
+
+#define get_next(t, insn)	\
+	({t r; r = *(t*)insn->next_byte; insn->next_byte += sizeof(t); r; })
+
+#define peek_next(t, insn)	\
+	({t r; r = *(t*)insn->next_byte; r; })
+
+#define peek_nbyte_next(t, insn, n)	\
+	({t r; r = *(t*)((insn)->next_byte + n); r; })
+
+/**
+ * insn_init() - initialize struct insn
+ * @insn:	&struct insn to be initialized
+ * @kaddr:	address (in kernel memory) of instruction (or copy thereof)
+ * @x86_64:	!0 for 64-bit kernel or 64-bit app
+ */
+void insn_init(struct insn *insn, const void *kaddr, int x86_64)
+{
+	memset(insn, 0, sizeof(*insn));
+	insn->kaddr = kaddr;
+	insn->next_byte = kaddr;
+	insn->x86_64 = x86_64 ? 1 : 0;
+	insn->opnd_bytes = 4;
+	if (x86_64)
+		insn->addr_bytes = 8;
+	else
+		insn->addr_bytes = 4;
+}
+
+/**
+ * insn_get_prefixes - scan x86 instruction prefix bytes
+ * @insn:	&struct insn containing instruction
+ *
+ * Populates the @insn->prefixes bitmap, and updates @insn->next_byte
+ * to point to the (first) opcode.  No effect if @insn->prefixes.got
+ * is already set.
+ */
+void insn_get_prefixes(struct insn *insn)
+{
+	struct insn_field *prefixes = &insn->prefixes;
+	insn_attr_t attr;
+	insn_byte_t b, lb;
+	int i, nb;
+
+	if (prefixes->got)
+		return;
+
+	nb = 0;
+	lb = 0;
+	b = peek_next(insn_byte_t, insn);
+	attr = inat_get_opcode_attribute(b);
+	while (inat_is_legacy_prefix(attr)) {
+		/* Skip if same prefix */
+		for (i = 0; i < nb; i++)
+			if (prefixes->bytes[i] == b)
+				goto found;
+		if (nb == 4)
+			/* Invalid instruction */
+			break;
+		prefixes->bytes[nb++] = b;
+		if (inat_is_address_size_prefix(attr)) {
+			/* address size switches 2/4 or 4/8 */
+			if (insn->x86_64)
+				insn->addr_bytes ^= 12;
+			else
+				insn->addr_bytes ^= 6;
+		} else if (inat_is_operand_size_prefix(attr)) {
+			/* oprand size switches 2/4 */
+			insn->opnd_bytes ^= 6;
+		}
+found:
+		prefixes->nbytes++;
+		insn->next_byte++;
+		lb = b;
+		b = peek_next(insn_byte_t, insn);
+		attr = inat_get_opcode_attribute(b);
+	}
+	/* Set the last prefix */
+	if (lb && lb != insn->prefixes.bytes[3]) {
+		if (unlikely(insn->prefixes.bytes[3])) {
+			/* Swap the last prefix */
+			b = insn->prefixes.bytes[3];
+			for (i = 0; i < nb; i++)
+				if (prefixes->bytes[i] == lb)
+					prefixes->bytes[i] = b;
+		}
+		insn->prefixes.bytes[3] = lb;
+	}
+
+	/* Decode REX prefix */
+	if (insn->x86_64) {
+		b = peek_next(insn_byte_t, insn);
+		attr = inat_get_opcode_attribute(b);
+		if (inat_is_rex_prefix(attr)) {
+			insn->rex_prefix.value = b;
+			insn->rex_prefix.nbytes = 1;
+			insn->next_byte++;
+			if (X86_REX_W(b))
+				/* REX.W overrides opnd_size */
+				insn->opnd_bytes = 8;
+		}
+	}
+	insn->rex_prefix.got = 1;
+
+	/* Decode VEX prefix */
+	b = peek_next(insn_byte_t, insn);
+	attr = inat_get_opcode_attribute(b);
+	if (inat_is_vex_prefix(attr)) {
+		insn_byte_t b2 = peek_nbyte_next(insn_byte_t, insn, 1);
+		if (!insn->x86_64) {
+			/*
+			 * In 32-bits mode, if the [7:6] bits (mod bits of
+			 * ModRM) on the second byte are not 11b, it is
+			 * LDS or LES.
+			 */
+			if (X86_MODRM_MOD(b2) != 3)
+				goto vex_end;
+		}
+		insn->vex_prefix.bytes[0] = b;
+		insn->vex_prefix.bytes[1] = b2;
+		if (inat_is_vex3_prefix(attr)) {
+			b2 = peek_nbyte_next(insn_byte_t, insn, 2);
+			insn->vex_prefix.bytes[2] = b2;
+			insn->vex_prefix.nbytes = 3;
+			insn->next_byte += 3;
+			if (insn->x86_64 && X86_VEX_W(b2))
+				/* VEX.W overrides opnd_size */
+				insn->opnd_bytes = 8;
+		} else {
+			insn->vex_prefix.nbytes = 2;
+			insn->next_byte += 2;
+		}
+	}
+vex_end:
+	insn->vex_prefix.got = 1;
+
+	prefixes->got = 1;
+	return;
+}
+
+/**
+ * insn_get_opcode - collect opcode(s)
+ * @insn:	&struct insn containing instruction
+ *
+ * Populates @insn->opcode, updates @insn->next_byte to point past the
+ * opcode byte(s), and set @insn->attr (except for groups).
+ * If necessary, first collects any preceding (prefix) bytes.
+ * Sets @insn->opcode.value = opcode1.  No effect if @insn->opcode.got
+ * is already 1.
+ */
+void insn_get_opcode(struct insn *insn)
+{
+	struct insn_field *opcode = &insn->opcode;
+	insn_byte_t op, pfx;
+	if (opcode->got)
+		return;
+	if (!insn->prefixes.got)
+		insn_get_prefixes(insn);
+
+	/* Get first opcode */
+	op = get_next(insn_byte_t, insn);
+	opcode->bytes[0] = op;
+	opcode->nbytes = 1;
+
+	/* Check if there is VEX prefix or not */
+	if (insn_is_avx(insn)) {
+		insn_byte_t m, p;
+		m = insn_vex_m_bits(insn);
+		p = insn_vex_p_bits(insn);
+		insn->attr = inat_get_avx_attribute(op, m, p);
+		if (!inat_accept_vex(insn->attr))
+			insn->attr = 0;	/* This instruction is bad */
+		goto end;	/* VEX has only 1 byte for opcode */
+	}
+
+	insn->attr = inat_get_opcode_attribute(op);
+	while (inat_is_escape(insn->attr)) {
+		/* Get escaped opcode */
+		op = get_next(insn_byte_t, insn);
+		opcode->bytes[opcode->nbytes++] = op;
+		pfx = insn_last_prefix(insn);
+		insn->attr = inat_get_escape_attribute(op, pfx, insn->attr);
+	}
+	if (inat_must_vex(insn->attr))
+		insn->attr = 0;	/* This instruction is bad */
+end:
+	opcode->got = 1;
+}
+
+/**
+ * insn_get_modrm - collect ModRM byte, if any
+ * @insn:	&struct insn containing instruction
+ *
+ * Populates @insn->modrm and updates @insn->next_byte to point past the
+ * ModRM byte, if any.  If necessary, first collects the preceding bytes
+ * (prefixes and opcode(s)).  No effect if @insn->modrm.got is already 1.
+ */
+void insn_get_modrm(struct insn *insn)
+{
+	struct insn_field *modrm = &insn->modrm;
+	insn_byte_t pfx, mod;
+	if (modrm->got)
+		return;
+	if (!insn->opcode.got)
+		insn_get_opcode(insn);
+
+	if (inat_has_modrm(insn->attr)) {
+		mod = get_next(insn_byte_t, insn);
+		modrm->value = mod;
+		modrm->nbytes = 1;
+		if (inat_is_group(insn->attr)) {
+			pfx = insn_last_prefix(insn);
+			insn->attr = inat_get_group_attribute(mod, pfx,
+							      insn->attr);
+		}
+	}
+
+	if (insn->x86_64 && inat_is_force64(insn->attr))
+		insn->opnd_bytes = 8;
+	modrm->got = 1;
+}
+
+
+/**
+ * insn_rip_relative() - Does instruction use RIP-relative addressing mode?
+ * @insn:	&struct insn containing instruction
+ *
+ * If necessary, first collects the instruction up to and including the
+ * ModRM byte.  No effect if @insn->x86_64 is 0.
+ */
+int insn_rip_relative(struct insn *insn)
+{
+	struct insn_field *modrm = &insn->modrm;
+
+	if (!insn->x86_64)
+		return 0;
+	if (!modrm->got)
+		insn_get_modrm(insn);
+	/*
+	 * For rip-relative instructions, the mod field (top 2 bits)
+	 * is zero and the r/m field (bottom 3 bits) is 0x5.
+	 */
+	return (modrm->nbytes && (modrm->value & 0xc7) == 0x5);
+}
+
+/**
+ * insn_get_sib() - Get the SIB byte of instruction
+ * @insn:	&struct insn containing instruction
+ *
+ * If necessary, first collects the instruction up to and including the
+ * ModRM byte.
+ */
+void insn_get_sib(struct insn *insn)
+{
+	insn_byte_t modrm;
+
+	if (insn->sib.got)
+		return;
+	if (!insn->modrm.got)
+		insn_get_modrm(insn);
+	if (insn->modrm.nbytes) {
+		modrm = (insn_byte_t)insn->modrm.value;
+		if (insn->addr_bytes != 2 &&
+		    X86_MODRM_MOD(modrm) != 3 && X86_MODRM_RM(modrm) == 4) {
+			insn->sib.value = get_next(insn_byte_t, insn);
+			insn->sib.nbytes = 1;
+		}
+	}
+	insn->sib.got = 1;
+}
+
+
+/**
+ * insn_get_displacement() - Get the displacement of instruction
+ * @insn:	&struct insn containing instruction
+ *
+ * If necessary, first collects the instruction up to and including the
+ * SIB byte.
+ * Displacement value is sign-expanded.
+ */
+void insn_get_displacement(struct insn *insn)
+{
+	insn_byte_t mod, rm, base;
+
+	if (insn->displacement.got)
+		return;
+	if (!insn->sib.got)
+		insn_get_sib(insn);
+	if (insn->modrm.nbytes) {
+		/*
+		 * Interpreting the modrm byte:
+		 * mod = 00 - no displacement fields (exceptions below)
+		 * mod = 01 - 1-byte displacement field
+		 * mod = 10 - displacement field is 4 bytes, or 2 bytes if
+		 * 	address size = 2 (0x67 prefix in 32-bit mode)
+		 * mod = 11 - no memory operand
+		 *
+		 * If address size = 2...
+		 * mod = 00, r/m = 110 - displacement field is 2 bytes
+		 *
+		 * If address size != 2...
+		 * mod != 11, r/m = 100 - SIB byte exists
+		 * mod = 00, SIB base = 101 - displacement field is 4 bytes
+		 * mod = 00, r/m = 101 - rip-relative addressing, displacement
+		 * 	field is 4 bytes
+		 */
+		mod = X86_MODRM_MOD(insn->modrm.value);
+		rm = X86_MODRM_RM(insn->modrm.value);
+		base = X86_SIB_BASE(insn->sib.value);
+		if (mod == 3)
+			goto out;
+		if (mod == 1) {
+			insn->displacement.value = get_next(char, insn);
+			insn->displacement.nbytes = 1;
+		} else if (insn->addr_bytes == 2) {
+			if ((mod == 0 && rm == 6) || mod == 2) {
+				insn->displacement.value =
+					 get_next(short, insn);
+				insn->displacement.nbytes = 2;
+			}
+		} else {
+			if ((mod == 0 && rm == 5) || mod == 2 ||
+			    (mod == 0 && base == 5)) {
+				insn->displacement.value = get_next(int, insn);
+				insn->displacement.nbytes = 4;
+			}
+		}
+	}
+out:
+	insn->displacement.got = 1;
+}
+
+/* Decode moffset16/32/64 */
+static void __get_moffset(struct insn *insn)
+{
+	switch (insn->addr_bytes) {
+	case 2:
+		insn->moffset1.value = get_next(short, insn);
+		insn->moffset1.nbytes = 2;
+		break;
+	case 4:
+		insn->moffset1.value = get_next(int, insn);
+		insn->moffset1.nbytes = 4;
+		break;
+	case 8:
+		insn->moffset1.value = get_next(int, insn);
+		insn->moffset1.nbytes = 4;
+		insn->moffset2.value = get_next(int, insn);
+		insn->moffset2.nbytes = 4;
+		break;
+	}
+	insn->moffset1.got = insn->moffset2.got = 1;
+}
+
+/* Decode imm v32(Iz) */
+static void __get_immv32(struct insn *insn)
+{
+	switch (insn->opnd_bytes) {
+	case 2:
+		insn->immediate.value = get_next(short, insn);
+		insn->immediate.nbytes = 2;
+		break;
+	case 4:
+	case 8:
+		insn->immediate.value = get_next(int, insn);
+		insn->immediate.nbytes = 4;
+		break;
+	}
+}
+
+/* Decode imm v64(Iv/Ov) */
+static void __get_immv(struct insn *insn)
+{
+	switch (insn->opnd_bytes) {
+	case 2:
+		insn->immediate1.value = get_next(short, insn);
+		insn->immediate1.nbytes = 2;
+		break;
+	case 4:
+		insn->immediate1.value = get_next(int, insn);
+		insn->immediate1.nbytes = 4;
+		break;
+	case 8:
+		insn->immediate1.value = get_next(int, insn);
+		insn->immediate1.nbytes = 4;
+		insn->immediate2.value = get_next(int, insn);
+		insn->immediate2.nbytes = 4;
+		break;
+	}
+	insn->immediate1.got = insn->immediate2.got = 1;
+}
+
+/* Decode ptr16:16/32(Ap) */
+static void __get_immptr(struct insn *insn)
+{
+	switch (insn->opnd_bytes) {
+	case 2:
+		insn->immediate1.value = get_next(short, insn);
+		insn->immediate1.nbytes = 2;
+		break;
+	case 4:
+		insn->immediate1.value = get_next(int, insn);
+		insn->immediate1.nbytes = 4;
+		break;
+	case 8:
+		/* ptr16:64 is not exist (no segment) */
+		return;
+	}
+	insn->immediate2.value = get_next(unsigned short, insn);
+	insn->immediate2.nbytes = 2;
+	insn->immediate1.got = insn->immediate2.got = 1;
+}
+
+/**
+ * insn_get_immediate() - Get the immediates of instruction
+ * @insn:	&struct insn containing instruction
+ *
+ * If necessary, first collects the instruction up to and including the
+ * displacement bytes.
+ * Basically, most of immediates are sign-expanded. Unsigned-value can be
+ * get by bit masking with ((1 << (nbytes * 8)) - 1)
+ */
+void insn_get_immediate(struct insn *insn)
+{
+	if (insn->immediate.got)
+		return;
+	if (!insn->displacement.got)
+		insn_get_displacement(insn);
+
+	if (inat_has_moffset(insn->attr)) {
+		__get_moffset(insn);
+		goto done;
+	}
+
+	if (!inat_has_immediate(insn->attr))
+		/* no immediates */
+		goto done;
+
+	switch (inat_immediate_size(insn->attr)) {
+	case INAT_IMM_BYTE:
+		insn->immediate.value = get_next(char, insn);
+		insn->immediate.nbytes = 1;
+		break;
+	case INAT_IMM_WORD:
+		insn->immediate.value = get_next(short, insn);
+		insn->immediate.nbytes = 2;
+		break;
+	case INAT_IMM_DWORD:
+		insn->immediate.value = get_next(int, insn);
+		insn->immediate.nbytes = 4;
+		break;
+	case INAT_IMM_QWORD:
+		insn->immediate1.value = get_next(int, insn);
+		insn->immediate1.nbytes = 4;
+		insn->immediate2.value = get_next(int, insn);
+		insn->immediate2.nbytes = 4;
+		break;
+	case INAT_IMM_PTR:
+		__get_immptr(insn);
+		break;
+	case INAT_IMM_VWORD32:
+		__get_immv32(insn);
+		break;
+	case INAT_IMM_VWORD:
+		__get_immv(insn);
+		break;
+	default:
+		break;
+	}
+	if (inat_has_second_immediate(insn->attr)) {
+		insn->immediate2.value = get_next(char, insn);
+		insn->immediate2.nbytes = 1;
+	}
+done:
+	insn->immediate.got = 1;
+}
+
+/**
+ * insn_get_length() - Get the length of instruction
+ * @insn:	&struct insn containing instruction
+ *
+ * If necessary, first collects the instruction up to and including the
+ * immediates bytes.
+ */
+void insn_get_length(struct insn *insn)
+{
+	if (insn->length)
+		return;
+	if (!insn->immediate.got)
+		insn_get_immediate(insn);
+	insn->length = (unsigned char)((unsigned long)insn->next_byte
+				     - (unsigned long)insn->kaddr);
+}
diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c
index 33a1e3ca22d8..41628b104b9e 100644
--- a/arch/x86/lib/msr.c
+++ b/arch/x86/lib/msr.c
@@ -71,14 +71,9 @@ int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 }
 EXPORT_SYMBOL(wrmsr_on_cpu);
 
-/* rdmsr on a bunch of CPUs
- *
- * @mask:       which CPUs
- * @msr_no:     which MSR
- * @msrs:       array of MSR values
- *
- */
-void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs)
+static void __rwmsr_on_cpus(const struct cpumask *mask, u32 msr_no,
+			    struct msr *msrs,
+			    void (*msr_func) (void *info))
 {
 	struct msr_info rv;
 	int this_cpu;
@@ -92,11 +87,23 @@ void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs)
 	this_cpu = get_cpu();
 
 	if (cpumask_test_cpu(this_cpu, mask))
-		__rdmsr_on_cpu(&rv);
+		msr_func(&rv);
 
-	smp_call_function_many(mask, __rdmsr_on_cpu, &rv, 1);
+	smp_call_function_many(mask, msr_func, &rv, 1);
 	put_cpu();
 }
+
+/* rdmsr on a bunch of CPUs
+ *
+ * @mask:       which CPUs
+ * @msr_no:     which MSR
+ * @msrs:       array of MSR values
+ *
+ */
+void rdmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs)
+{
+	__rwmsr_on_cpus(mask, msr_no, msrs, __rdmsr_on_cpu);
+}
 EXPORT_SYMBOL(rdmsr_on_cpus);
 
 /*
@@ -107,24 +114,9 @@ EXPORT_SYMBOL(rdmsr_on_cpus);
  * @msrs:       array of MSR values
  *
  */
-void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs)
+void wrmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs)
 {
-	struct msr_info rv;
-	int this_cpu;
-
-	memset(&rv, 0, sizeof(rv));
-
-	rv.off    = cpumask_first(mask);
-	rv.msrs   = msrs;
-	rv.msr_no = msr_no;
-
-	this_cpu = get_cpu();
-
-	if (cpumask_test_cpu(this_cpu, mask))
-		__wrmsr_on_cpu(&rv);
-
-	smp_call_function_many(mask, __wrmsr_on_cpu, &rv, 1);
-	put_cpu();
+	__rwmsr_on_cpus(mask, msr_no, msrs, __wrmsr_on_cpu);
 }
 EXPORT_SYMBOL(wrmsr_on_cpus);
 
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 1f118d462acc..e218d5df85ff 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -874,7 +874,7 @@ EXPORT_SYMBOL(copy_to_user);
  * data to the requested size using zero bytes.
  */
 unsigned long
-copy_from_user(void *to, const void __user *from, unsigned long n)
+_copy_from_user(void *to, const void __user *from, unsigned long n)
 {
 	if (access_ok(VERIFY_READ, from, n))
 		n = __copy_from_user(to, from, n);
@@ -882,4 +882,10 @@ copy_from_user(void *to, const void __user *from, unsigned long n)
 		memset(to, 0, n);
 	return n;
 }
-EXPORT_SYMBOL(copy_from_user);
+EXPORT_SYMBOL(_copy_from_user);
+
+void copy_from_user_overflow(void)
+{
+	WARN(1, "Buffer overflow detected!\n");
+}
+EXPORT_SYMBOL(copy_from_user_overflow);
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
new file mode 100644
index 000000000000..a793da5e560e
--- /dev/null
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -0,0 +1,893 @@
+# x86 Opcode Maps
+#
+#<Opcode maps>
+# Table: table-name
+# Referrer: escaped-name
+# AVXcode: avx-code
+# opcode: mnemonic|GrpXXX [operand1[,operand2...]] [(extra1)[,(extra2)...] [| 2nd-mnemonic ...]
+# (or)
+# opcode: escape # escaped-name
+# EndTable
+#
+#<group maps>
+# GrpTable: GrpXXX
+# reg:  mnemonic [operand1[,operand2...]] [(extra1)[,(extra2)...] [| 2nd-mnemonic ...]
+# EndTable
+#
+# AVX Superscripts
+#  (VEX): this opcode can accept VEX prefix.
+#  (oVEX): this opcode requires VEX prefix.
+#  (o128): this opcode only supports 128bit VEX.
+#  (o256): this opcode only supports 256bit VEX.
+#
+
+Table: one byte opcode
+Referrer:
+AVXcode:
+# 0x00 - 0x0f
+00: ADD Eb,Gb
+01: ADD Ev,Gv
+02: ADD Gb,Eb
+03: ADD Gv,Ev
+04: ADD AL,Ib
+05: ADD rAX,Iz
+06: PUSH ES (i64)
+07: POP ES (i64)
+08: OR Eb,Gb
+09: OR Ev,Gv
+0a: OR Gb,Eb
+0b: OR Gv,Ev
+0c: OR AL,Ib
+0d: OR rAX,Iz
+0e: PUSH CS (i64)
+0f: escape # 2-byte escape
+# 0x10 - 0x1f
+10: ADC Eb,Gb
+11: ADC Ev,Gv
+12: ADC Gb,Eb
+13: ADC Gv,Ev
+14: ADC AL,Ib
+15: ADC rAX,Iz
+16: PUSH SS (i64)
+17: POP SS (i64)
+18: SBB Eb,Gb
+19: SBB Ev,Gv
+1a: SBB Gb,Eb
+1b: SBB Gv,Ev
+1c: SBB AL,Ib
+1d: SBB rAX,Iz
+1e: PUSH DS (i64)
+1f: POP DS (i64)
+# 0x20 - 0x2f
+20: AND Eb,Gb
+21: AND Ev,Gv
+22: AND Gb,Eb
+23: AND Gv,Ev
+24: AND AL,Ib
+25: AND rAx,Iz
+26: SEG=ES (Prefix)
+27: DAA (i64)
+28: SUB Eb,Gb
+29: SUB Ev,Gv
+2a: SUB Gb,Eb
+2b: SUB Gv,Ev
+2c: SUB AL,Ib
+2d: SUB rAX,Iz
+2e: SEG=CS (Prefix)
+2f: DAS (i64)
+# 0x30 - 0x3f
+30: XOR Eb,Gb
+31: XOR Ev,Gv
+32: XOR Gb,Eb
+33: XOR Gv,Ev
+34: XOR AL,Ib
+35: XOR rAX,Iz
+36: SEG=SS (Prefix)
+37: AAA (i64)
+38: CMP Eb,Gb
+39: CMP Ev,Gv
+3a: CMP Gb,Eb
+3b: CMP Gv,Ev
+3c: CMP AL,Ib
+3d: CMP rAX,Iz
+3e: SEG=DS (Prefix)
+3f: AAS (i64)
+# 0x40 - 0x4f
+40: INC eAX (i64) | REX (o64)
+41: INC eCX (i64) | REX.B (o64)
+42: INC eDX (i64) | REX.X (o64)
+43: INC eBX (i64) | REX.XB (o64)
+44: INC eSP (i64) | REX.R (o64)
+45: INC eBP (i64) | REX.RB (o64)
+46: INC eSI (i64) | REX.RX (o64)
+47: INC eDI (i64) | REX.RXB (o64)
+48: DEC eAX (i64) | REX.W (o64)
+49: DEC eCX (i64) | REX.WB (o64)
+4a: DEC eDX (i64) | REX.WX (o64)
+4b: DEC eBX (i64) | REX.WXB (o64)
+4c: DEC eSP (i64) | REX.WR (o64)
+4d: DEC eBP (i64) | REX.WRB (o64)
+4e: DEC eSI (i64) | REX.WRX (o64)
+4f: DEC eDI (i64) | REX.WRXB (o64)
+# 0x50 - 0x5f
+50: PUSH rAX/r8 (d64)
+51: PUSH rCX/r9 (d64)
+52: PUSH rDX/r10 (d64)
+53: PUSH rBX/r11 (d64)
+54: PUSH rSP/r12 (d64)
+55: PUSH rBP/r13 (d64)
+56: PUSH rSI/r14 (d64)
+57: PUSH rDI/r15 (d64)
+58: POP rAX/r8 (d64)
+59: POP rCX/r9 (d64)
+5a: POP rDX/r10 (d64)
+5b: POP rBX/r11 (d64)
+5c: POP rSP/r12 (d64)
+5d: POP rBP/r13 (d64)
+5e: POP rSI/r14 (d64)
+5f: POP rDI/r15 (d64)
+# 0x60 - 0x6f
+60: PUSHA/PUSHAD (i64)
+61: POPA/POPAD (i64)
+62: BOUND Gv,Ma (i64)
+63: ARPL Ew,Gw (i64) | MOVSXD Gv,Ev (o64)
+64: SEG=FS (Prefix)
+65: SEG=GS (Prefix)
+66: Operand-Size (Prefix)
+67: Address-Size (Prefix)
+68: PUSH Iz (d64)
+69: IMUL Gv,Ev,Iz
+6a: PUSH Ib (d64)
+6b: IMUL Gv,Ev,Ib
+6c: INS/INSB Yb,DX
+6d: INS/INSW/INSD Yz,DX
+6e: OUTS/OUTSB DX,Xb
+6f: OUTS/OUTSW/OUTSD DX,Xz
+# 0x70 - 0x7f
+70: JO Jb
+71: JNO Jb
+72: JB/JNAE/JC Jb
+73: JNB/JAE/JNC Jb
+74: JZ/JE Jb
+75: JNZ/JNE Jb
+76: JBE/JNA Jb
+77: JNBE/JA Jb
+78: JS Jb
+79: JNS Jb
+7a: JP/JPE Jb
+7b: JNP/JPO Jb
+7c: JL/JNGE Jb
+7d: JNL/JGE Jb
+7e: JLE/JNG Jb
+7f: JNLE/JG Jb
+# 0x80 - 0x8f
+80: Grp1 Eb,Ib (1A)
+81: Grp1 Ev,Iz (1A)
+82: Grp1 Eb,Ib (1A),(i64)
+83: Grp1 Ev,Ib (1A)
+84: TEST Eb,Gb
+85: TEST Ev,Gv
+86: XCHG Eb,Gb
+87: XCHG Ev,Gv
+88: MOV Eb,Gb
+89: MOV Ev,Gv
+8a: MOV Gb,Eb
+8b: MOV Gv,Ev
+8c: MOV Ev,Sw
+8d: LEA Gv,M
+8e: MOV Sw,Ew
+8f: Grp1A (1A) | POP Ev (d64)
+# 0x90 - 0x9f
+90: NOP | PAUSE (F3) | XCHG r8,rAX
+91: XCHG rCX/r9,rAX
+92: XCHG rDX/r10,rAX
+93: XCHG rBX/r11,rAX
+94: XCHG rSP/r12,rAX
+95: XCHG rBP/r13,rAX
+96: XCHG rSI/r14,rAX
+97: XCHG rDI/r15,rAX
+98: CBW/CWDE/CDQE
+99: CWD/CDQ/CQO
+9a: CALLF Ap (i64)
+9b: FWAIT/WAIT
+9c: PUSHF/D/Q Fv (d64)
+9d: POPF/D/Q Fv (d64)
+9e: SAHF
+9f: LAHF
+# 0xa0 - 0xaf
+a0: MOV AL,Ob
+a1: MOV rAX,Ov
+a2: MOV Ob,AL
+a3: MOV Ov,rAX
+a4: MOVS/B Xb,Yb
+a5: MOVS/W/D/Q Xv,Yv
+a6: CMPS/B Xb,Yb
+a7: CMPS/W/D Xv,Yv
+a8: TEST AL,Ib
+a9: TEST rAX,Iz
+aa: STOS/B Yb,AL
+ab: STOS/W/D/Q Yv,rAX
+ac: LODS/B AL,Xb
+ad: LODS/W/D/Q rAX,Xv
+ae: SCAS/B AL,Yb
+af: SCAS/W/D/Q rAX,Xv
+# 0xb0 - 0xbf
+b0: MOV AL/R8L,Ib
+b1: MOV CL/R9L,Ib
+b2: MOV DL/R10L,Ib
+b3: MOV BL/R11L,Ib
+b4: MOV AH/R12L,Ib
+b5: MOV CH/R13L,Ib
+b6: MOV DH/R14L,Ib
+b7: MOV BH/R15L,Ib
+b8: MOV rAX/r8,Iv
+b9: MOV rCX/r9,Iv
+ba: MOV rDX/r10,Iv
+bb: MOV rBX/r11,Iv
+bc: MOV rSP/r12,Iv
+bd: MOV rBP/r13,Iv
+be: MOV rSI/r14,Iv
+bf: MOV rDI/r15,Iv
+# 0xc0 - 0xcf
+c0: Grp2 Eb,Ib (1A)
+c1: Grp2 Ev,Ib (1A)
+c2: RETN Iw (f64)
+c3: RETN
+c4: LES Gz,Mp (i64) | 3bytes-VEX (Prefix)
+c5: LDS Gz,Mp (i64) | 2bytes-VEX (Prefix)
+c6: Grp11 Eb,Ib (1A)
+c7: Grp11 Ev,Iz (1A)
+c8: ENTER Iw,Ib
+c9: LEAVE (d64)
+ca: RETF Iw
+cb: RETF
+cc: INT3
+cd: INT Ib
+ce: INTO (i64)
+cf: IRET/D/Q
+# 0xd0 - 0xdf
+d0: Grp2 Eb,1 (1A)
+d1: Grp2 Ev,1 (1A)
+d2: Grp2 Eb,CL (1A)
+d3: Grp2 Ev,CL (1A)
+d4: AAM Ib (i64)
+d5: AAD Ib (i64)
+d6:
+d7: XLAT/XLATB
+d8: ESC
+d9: ESC
+da: ESC
+db: ESC
+dc: ESC
+dd: ESC
+de: ESC
+df: ESC
+# 0xe0 - 0xef
+e0: LOOPNE/LOOPNZ Jb (f64)
+e1: LOOPE/LOOPZ Jb (f64)
+e2: LOOP Jb (f64)
+e3: JrCXZ Jb (f64)
+e4: IN AL,Ib
+e5: IN eAX,Ib
+e6: OUT Ib,AL
+e7: OUT Ib,eAX
+e8: CALL Jz (f64)
+e9: JMP-near Jz (f64)
+ea: JMP-far Ap (i64)
+eb: JMP-short Jb (f64)
+ec: IN AL,DX
+ed: IN eAX,DX
+ee: OUT DX,AL
+ef: OUT DX,eAX
+# 0xf0 - 0xff
+f0: LOCK (Prefix)
+f1:
+f2: REPNE (Prefix)
+f3: REP/REPE (Prefix)
+f4: HLT
+f5: CMC
+f6: Grp3_1 Eb (1A)
+f7: Grp3_2 Ev (1A)
+f8: CLC
+f9: STC
+fa: CLI
+fb: STI
+fc: CLD
+fd: STD
+fe: Grp4 (1A)
+ff: Grp5 (1A)
+EndTable
+
+Table: 2-byte opcode (0x0f)
+Referrer: 2-byte escape
+AVXcode: 1
+# 0x0f 0x00-0x0f
+00: Grp6 (1A)
+01: Grp7 (1A)
+02: LAR Gv,Ew
+03: LSL Gv,Ew
+04:
+05: SYSCALL (o64)
+06: CLTS
+07: SYSRET (o64)
+08: INVD
+09: WBINVD
+0a:
+0b: UD2 (1B)
+0c:
+0d: NOP Ev | GrpP
+0e: FEMMS
+# 3DNow! uses the last imm byte as opcode extension.
+0f: 3DNow! Pq,Qq,Ib
+# 0x0f 0x10-0x1f
+10: movups Vps,Wps (VEX) | movss Vss,Wss (F3),(VEX),(o128) | movupd Vpd,Wpd (66),(VEX) | movsd Vsd,Wsd (F2),(VEX),(o128)
+11: movups Wps,Vps (VEX) | movss Wss,Vss (F3),(VEX),(o128) | movupd Wpd,Vpd (66),(VEX) | movsd Wsd,Vsd (F2),(VEX),(o128)
+12: movlps Vq,Mq (VEX),(o128) | movlpd Vq,Mq (66),(VEX),(o128) | movhlps Vq,Uq (VEX),(o128) | movddup Vq,Wq (F2),(VEX) | movsldup Vq,Wq (F3),(VEX)
+13: mpvlps Mq,Vq (VEX),(o128) | movlpd Mq,Vq (66),(VEX),(o128)
+14: unpcklps Vps,Wq (VEX) | unpcklpd Vpd,Wq (66),(VEX)
+15: unpckhps Vps,Wq (VEX) | unpckhpd Vpd,Wq (66),(VEX)
+16: movhps Vq,Mq (VEX),(o128) | movhpd Vq,Mq (66),(VEX),(o128) | movlsps Vq,Uq (VEX),(o128) | movshdup Vq,Wq (F3),(VEX)
+17: movhps Mq,Vq (VEX),(o128) | movhpd Mq,Vq (66),(VEX),(o128)
+18: Grp16 (1A)
+19:
+1a:
+1b:
+1c:
+1d:
+1e:
+1f: NOP Ev
+# 0x0f 0x20-0x2f
+20: MOV Rd,Cd
+21: MOV Rd,Dd
+22: MOV Cd,Rd
+23: MOV Dd,Rd
+24:
+25:
+26:
+27:
+28: movaps Vps,Wps (VEX) | movapd Vpd,Wpd (66),(VEX)
+29: movaps Wps,Vps (VEX) | movapd Wpd,Vpd (66),(VEX)
+2a: cvtpi2ps Vps,Qpi | cvtsi2ss Vss,Ed/q (F3),(VEX),(o128) | cvtpi2pd Vpd,Qpi (66) | cvtsi2sd Vsd,Ed/q (F2),(VEX),(o128)
+2b: movntps Mps,Vps (VEX) | movntpd Mpd,Vpd (66),(VEX)
+2c: cvttps2pi Ppi,Wps | cvttss2si  Gd/q,Wss (F3),(VEX),(o128) | cvttpd2pi Ppi,Wpd (66) | cvttsd2si Gd/q,Wsd (F2),(VEX),(o128)
+2d: cvtps2pi Ppi,Wps | cvtss2si Gd/q,Wss (F3),(VEX),(o128) | cvtpd2pi Qpi,Wpd (66) | cvtsd2si Gd/q,Wsd (F2),(VEX),(o128)
+2e: ucomiss Vss,Wss (VEX),(o128) | ucomisd  Vsd,Wsd (66),(VEX),(o128)
+2f: comiss Vss,Wss (VEX),(o128) | comisd  Vsd,Wsd (66),(VEX),(o128)
+# 0x0f 0x30-0x3f
+30: WRMSR
+31: RDTSC
+32: RDMSR
+33: RDPMC
+34: SYSENTER
+35: SYSEXIT
+36:
+37: GETSEC
+38: escape # 3-byte escape 1
+39:
+3a: escape # 3-byte escape 2
+3b:
+3c:
+3d:
+3e:
+3f:
+# 0x0f 0x40-0x4f
+40: CMOVO Gv,Ev
+41: CMOVNO Gv,Ev
+42: CMOVB/C/NAE Gv,Ev
+43: CMOVAE/NB/NC Gv,Ev
+44: CMOVE/Z Gv,Ev
+45: CMOVNE/NZ Gv,Ev
+46: CMOVBE/NA Gv,Ev
+47: CMOVA/NBE Gv,Ev
+48: CMOVS Gv,Ev
+49: CMOVNS Gv,Ev
+4a: CMOVP/PE Gv,Ev
+4b: CMOVNP/PO Gv,Ev
+4c: CMOVL/NGE Gv,Ev
+4d: CMOVNL/GE Gv,Ev
+4e: CMOVLE/NG Gv,Ev
+4f: CMOVNLE/G Gv,Ev
+# 0x0f 0x50-0x5f
+50: movmskps Gd/q,Ups (VEX) | movmskpd Gd/q,Upd (66),(VEX)
+51: sqrtps Vps,Wps (VEX) | sqrtss Vss,Wss (F3),(VEX),(o128) | sqrtpd Vpd,Wpd (66),(VEX) | sqrtsd Vsd,Wsd (F2),(VEX),(o128)
+52: rsqrtps Vps,Wps (VEX) | rsqrtss Vss,Wss (F3),(VEX),(o128)
+53: rcpps Vps,Wps (VEX) | rcpss Vss,Wss (F3),(VEX),(o128)
+54: andps Vps,Wps (VEX) | andpd Vpd,Wpd (66),(VEX)
+55: andnps Vps,Wps (VEX) | andnpd Vpd,Wpd (66),(VEX)
+56: orps Vps,Wps (VEX) | orpd Vpd,Wpd (66),(VEX)
+57: xorps Vps,Wps (VEX) | xorpd Vpd,Wpd (66),(VEX)
+58: addps Vps,Wps (VEX) | addss Vss,Wss (F3),(VEX),(o128) | addpd Vpd,Wpd (66),(VEX) | addsd Vsd,Wsd (F2),(VEX),(o128)
+59: mulps Vps,Wps (VEX) | mulss Vss,Wss (F3),(VEX),(o128) | mulpd Vpd,Wpd (66),(VEX) | mulsd Vsd,Wsd (F2),(VEX),(o128)
+5a: cvtps2pd Vpd,Wps (VEX) | cvtss2sd Vsd,Wss (F3),(VEX),(o128) | cvtpd2ps Vps,Wpd (66),(VEX) | cvtsd2ss Vsd,Wsd (F2),(VEX),(o128)
+5b: cvtdq2ps Vps,Wdq (VEX) | cvtps2dq Vdq,Wps (66),(VEX) | cvttps2dq Vdq,Wps (F3),(VEX)
+5c: subps Vps,Wps (VEX) | subss Vss,Wss (F3),(VEX),(o128) | subpd Vpd,Wpd (66),(VEX) | subsd Vsd,Wsd (F2),(VEX),(o128)
+5d: minps Vps,Wps (VEX) | minss Vss,Wss (F3),(VEX),(o128) | minpd Vpd,Wpd (66),(VEX) | minsd Vsd,Wsd (F2),(VEX),(o128)
+5e: divps Vps,Wps (VEX) | divss Vss,Wss (F3),(VEX),(o128) | divpd Vpd,Wpd (66),(VEX) | divsd Vsd,Wsd (F2),(VEX),(o128)
+5f: maxps Vps,Wps (VEX) | maxss Vss,Wss (F3),(VEX),(o128) | maxpd Vpd,Wpd (66),(VEX) | maxsd Vsd,Wsd (F2),(VEX),(o128)
+# 0x0f 0x60-0x6f
+60: punpcklbw Pq,Qd | punpcklbw Vdq,Wdq (66),(VEX),(o128)
+61: punpcklwd Pq,Qd | punpcklwd Vdq,Wdq (66),(VEX),(o128)
+62: punpckldq Pq,Qd | punpckldq Vdq,Wdq (66),(VEX),(o128)
+63: packsswb Pq,Qq | packsswb Vdq,Wdq (66),(VEX),(o128)
+64: pcmpgtb Pq,Qq | pcmpgtb Vdq,Wdq (66),(VEX),(o128)
+65: pcmpgtw Pq,Qq | pcmpgtw Vdq,Wdq (66),(VEX),(o128)
+66: pcmpgtd Pq,Qq | pcmpgtd Vdq,Wdq (66),(VEX),(o128)
+67: packuswb Pq,Qq | packuswb Vdq,Wdq (66),(VEX),(o128)
+68: punpckhbw Pq,Qd | punpckhbw Vdq,Wdq (66),(VEX),(o128)
+69: punpckhwd Pq,Qd | punpckhwd Vdq,Wdq (66),(VEX),(o128)
+6a: punpckhdq Pq,Qd | punpckhdq Vdq,Wdq (66),(VEX),(o128)
+6b: packssdw Pq,Qd | packssdw Vdq,Wdq (66),(VEX),(o128)
+6c: punpcklqdq Vdq,Wdq (66),(VEX),(o128)
+6d: punpckhqdq Vdq,Wdq (66),(VEX),(o128)
+6e: movd/q/ Pd,Ed/q | movd/q Vdq,Ed/q (66),(VEX),(o128)
+6f: movq Pq,Qq | movdqa Vdq,Wdq (66),(VEX) | movdqu Vdq,Wdq (F3),(VEX)
+# 0x0f 0x70-0x7f
+70: pshufw Pq,Qq,Ib | pshufd Vdq,Wdq,Ib (66),(VEX),(o128) | pshufhw Vdq,Wdq,Ib (F3),(VEX),(o128) | pshuflw VdqWdq,Ib (F2),(VEX),(o128)
+71: Grp12 (1A)
+72: Grp13 (1A)
+73: Grp14 (1A)
+74: pcmpeqb Pq,Qq | pcmpeqb Vdq,Wdq (66),(VEX),(o128)
+75: pcmpeqw Pq,Qq | pcmpeqw Vdq,Wdq (66),(VEX),(o128)
+76: pcmpeqd Pq,Qq | pcmpeqd Vdq,Wdq (66),(VEX),(o128)
+77: emms/vzeroupper/vzeroall (VEX)
+78: VMREAD Ed/q,Gd/q
+79: VMWRITE Gd/q,Ed/q
+7a:
+7b:
+7c: haddps Vps,Wps (F2),(VEX) | haddpd Vpd,Wpd (66),(VEX)
+7d: hsubps Vps,Wps (F2),(VEX) | hsubpd Vpd,Wpd (66),(VEX)
+7e: movd/q Ed/q,Pd | movd/q Ed/q,Vdq (66),(VEX),(o128) | movq Vq,Wq (F3),(VEX),(o128)
+7f: movq Qq,Pq | movdqa Wdq,Vdq (66),(VEX) | movdqu Wdq,Vdq (F3),(VEX)
+# 0x0f 0x80-0x8f
+80: JO Jz (f64)
+81: JNO Jz (f64)
+82: JB/JNAE/JC Jz (f64)
+83: JNB/JAE/JNC Jz (f64)
+84: JZ/JE Jz (f64)
+85: JNZ/JNE Jz (f64)
+86: JBE/JNA Jz (f64)
+87: JNBE/JA Jz (f64)
+88: JS Jz (f64)
+89: JNS Jz (f64)
+8a: JP/JPE Jz (f64)
+8b: JNP/JPO Jz (f64)
+8c: JL/JNGE Jz (f64)
+8d: JNL/JGE Jz (f64)
+8e: JLE/JNG Jz (f64)
+8f: JNLE/JG Jz (f64)
+# 0x0f 0x90-0x9f
+90: SETO Eb
+91: SETNO Eb
+92: SETB/C/NAE Eb
+93: SETAE/NB/NC Eb
+94: SETE/Z Eb
+95: SETNE/NZ Eb
+96: SETBE/NA Eb
+97: SETA/NBE Eb
+98: SETS Eb
+99: SETNS Eb
+9a: SETP/PE Eb
+9b: SETNP/PO Eb
+9c: SETL/NGE Eb
+9d: SETNL/GE Eb
+9e: SETLE/NG Eb
+9f: SETNLE/G Eb
+# 0x0f 0xa0-0xaf
+a0: PUSH FS (d64)
+a1: POP FS (d64)
+a2: CPUID
+a3: BT Ev,Gv
+a4: SHLD Ev,Gv,Ib
+a5: SHLD Ev,Gv,CL
+a6: GrpPDLK
+a7: GrpRNG
+a8: PUSH GS (d64)
+a9: POP GS (d64)
+aa: RSM
+ab: BTS Ev,Gv
+ac: SHRD Ev,Gv,Ib
+ad: SHRD Ev,Gv,CL
+ae: Grp15 (1A),(1C)
+af: IMUL Gv,Ev
+# 0x0f 0xb0-0xbf
+b0: CMPXCHG Eb,Gb
+b1: CMPXCHG Ev,Gv
+b2: LSS Gv,Mp
+b3: BTR Ev,Gv
+b4: LFS Gv,Mp
+b5: LGS Gv,Mp
+b6: MOVZX Gv,Eb
+b7: MOVZX Gv,Ew
+b8: JMPE | POPCNT Gv,Ev (F3)
+b9: Grp10 (1A)
+ba: Grp8 Ev,Ib (1A)
+bb: BTC Ev,Gv
+bc: BSF Gv,Ev
+bd: BSR Gv,Ev
+be: MOVSX Gv,Eb
+bf: MOVSX Gv,Ew
+# 0x0f 0xc0-0xcf
+c0: XADD Eb,Gb
+c1: XADD Ev,Gv
+c2: cmpps Vps,Wps,Ib (VEX) | cmpss Vss,Wss,Ib (F3),(VEX),(o128) | cmppd Vpd,Wpd,Ib (66),(VEX) | cmpsd Vsd,Wsd,Ib (F2),(VEX)
+c3: movnti Md/q,Gd/q
+c4: pinsrw Pq,Rd/q/Mw,Ib | pinsrw Vdq,Rd/q/Mw,Ib (66),(VEX),(o128)
+c5: pextrw Gd,Nq,Ib | pextrw Gd,Udq,Ib (66),(VEX),(o128)
+c6: shufps Vps,Wps,Ib (VEX) | shufpd Vpd,Wpd,Ib (66),(VEX)
+c7: Grp9 (1A)
+c8: BSWAP RAX/EAX/R8/R8D
+c9: BSWAP RCX/ECX/R9/R9D
+ca: BSWAP RDX/EDX/R10/R10D
+cb: BSWAP RBX/EBX/R11/R11D
+cc: BSWAP RSP/ESP/R12/R12D
+cd: BSWAP RBP/EBP/R13/R13D
+ce: BSWAP RSI/ESI/R14/R14D
+cf: BSWAP RDI/EDI/R15/R15D
+# 0x0f 0xd0-0xdf
+d0: addsubps Vps,Wps (F2),(VEX) | addsubpd Vpd,Wpd (66),(VEX)
+d1: psrlw Pq,Qq | psrlw Vdq,Wdq (66),(VEX),(o128)
+d2: psrld Pq,Qq | psrld Vdq,Wdq (66),(VEX),(o128)
+d3: psrlq Pq,Qq | psrlq Vdq,Wdq (66),(VEX),(o128)
+d4: paddq Pq,Qq | paddq Vdq,Wdq (66),(VEX),(o128)
+d5: pmullw Pq,Qq | pmullw Vdq,Wdq (66),(VEX),(o128)
+d6: movq Wq,Vq (66),(VEX),(o128) | movq2dq Vdq,Nq (F3) | movdq2q Pq,Uq (F2)
+d7: pmovmskb Gd,Nq | pmovmskb Gd,Udq (66),(VEX),(o128)
+d8: psubusb Pq,Qq | psubusb Vdq,Wdq (66),(VEX),(o128)
+d9: psubusw Pq,Qq | psubusw Vdq,Wdq (66),(VEX),(o128)
+da: pminub Pq,Qq | pminub Vdq,Wdq (66),(VEX),(o128)
+db: pand Pq,Qq | pand Vdq,Wdq (66),(VEX),(o128)
+dc: paddusb Pq,Qq | paddusb Vdq,Wdq (66),(VEX),(o128)
+dd: paddusw Pq,Qq | paddusw Vdq,Wdq (66),(VEX),(o128)
+de: pmaxub Pq,Qq | pmaxub Vdq,Wdq (66),(VEX),(o128)
+df: pandn Pq,Qq | pandn Vdq,Wdq (66),(VEX),(o128)
+# 0x0f 0xe0-0xef
+e0: pavgb Pq,Qq | pavgb Vdq,Wdq (66),(VEX),(o128)
+e1: psraw Pq,Qq | psraw Vdq,Wdq (66),(VEX),(o128)
+e2: psrad Pq,Qq | psrad Vdq,Wdq (66),(VEX),(o128)
+e3: pavgw Pq,Qq | pavgw Vdq,Wdq (66),(VEX),(o128)
+e4: pmulhuw Pq,Qq | pmulhuw Vdq,Wdq (66),(VEX),(o128)
+e5: pmulhw Pq,Qq | pmulhw Vdq,Wdq (66),(VEX),(o128)
+e6: cvtpd2dq Vdq,Wpd (F2),(VEX) | cvttpd2dq Vdq,Wpd (66),(VEX) | cvtdq2pd Vpd,Wdq (F3),(VEX)
+e7: movntq Mq,Pq | movntdq Mdq,Vdq (66),(VEX)
+e8: psubsb Pq,Qq | psubsb Vdq,Wdq (66),(VEX),(o128)
+e9: psubsw Pq,Qq | psubsw Vdq,Wdq (66),(VEX),(o128)
+ea: pminsw Pq,Qq | pminsw Vdq,Wdq (66),(VEX),(o128)
+eb: por Pq,Qq | por Vdq,Wdq (66),(VEX),(o128)
+ec: paddsb Pq,Qq | paddsb Vdq,Wdq (66),(VEX),(o128)
+ed: paddsw Pq,Qq | paddsw Vdq,Wdq (66),(VEX),(o128)
+ee: pmaxsw Pq,Qq | pmaxsw Vdq,Wdq (66),(VEX),(o128)
+ef: pxor Pq,Qq | pxor Vdq,Wdq (66),(VEX),(o128)
+# 0x0f 0xf0-0xff
+f0: lddqu Vdq,Mdq (F2),(VEX)
+f1: psllw Pq,Qq | psllw Vdq,Wdq (66),(VEX),(o128)
+f2: pslld Pq,Qq | pslld Vdq,Wdq (66),(VEX),(o128)
+f3: psllq Pq,Qq | psllq Vdq,Wdq (66),(VEX),(o128)
+f4: pmuludq Pq,Qq | pmuludq Vdq,Wdq (66),(VEX),(o128)
+f5: pmaddwd Pq,Qq | pmaddwd Vdq,Wdq (66),(VEX),(o128)
+f6: psadbw Pq,Qq | psadbw Vdq,Wdq (66),(VEX),(o128)
+f7: maskmovq Pq,Nq | maskmovdqu Vdq,Udq (66),(VEX),(o128)
+f8: psubb Pq,Qq | psubb Vdq,Wdq (66),(VEX),(o128)
+f9: psubw Pq,Qq | psubw Vdq,Wdq (66),(VEX),(o128)
+fa: psubd Pq,Qq | psubd Vdq,Wdq (66),(VEX),(o128)
+fb: psubq Pq,Qq | psubq Vdq,Wdq (66),(VEX),(o128)
+fc: paddb Pq,Qq | paddb Vdq,Wdq (66),(VEX),(o128)
+fd: paddw Pq,Qq | paddw Vdq,Wdq (66),(VEX),(o128)
+fe: paddd Pq,Qq | paddd Vdq,Wdq (66),(VEX),(o128)
+ff:
+EndTable
+
+Table: 3-byte opcode 1 (0x0f 0x38)
+Referrer: 3-byte escape 1
+AVXcode: 2
+# 0x0f 0x38 0x00-0x0f
+00: pshufb Pq,Qq | pshufb Vdq,Wdq (66),(VEX),(o128)
+01: phaddw Pq,Qq | phaddw Vdq,Wdq (66),(VEX),(o128)
+02: phaddd Pq,Qq | phaddd Vdq,Wdq (66),(VEX),(o128)
+03: phaddsw Pq,Qq | phaddsw Vdq,Wdq (66),(VEX),(o128)
+04: pmaddubsw Pq,Qq | pmaddubsw Vdq,Wdq (66),(VEX),(o128)
+05: phsubw Pq,Qq | phsubw Vdq,Wdq (66),(VEX),(o128)
+06: phsubd Pq,Qq | phsubd Vdq,Wdq (66),(VEX),(o128)
+07: phsubsw Pq,Qq | phsubsw Vdq,Wdq (66),(VEX),(o128)
+08: psignb Pq,Qq | psignb Vdq,Wdq (66),(VEX),(o128)
+09: psignw Pq,Qq | psignw Vdq,Wdq (66),(VEX),(o128)
+0a: psignd Pq,Qq | psignd Vdq,Wdq (66),(VEX),(o128)
+0b: pmulhrsw Pq,Qq | pmulhrsw Vdq,Wdq (66),(VEX),(o128)
+0c: Vpermilps /r (66),(oVEX)
+0d: Vpermilpd /r (66),(oVEX)
+0e: vtestps /r (66),(oVEX)
+0f: vtestpd /r (66),(oVEX)
+# 0x0f 0x38 0x10-0x1f
+10: pblendvb Vdq,Wdq (66)
+11:
+12:
+13:
+14: blendvps Vdq,Wdq (66)
+15: blendvpd Vdq,Wdq (66)
+16:
+17: ptest Vdq,Wdq (66),(VEX)
+18: vbroadcastss /r (66),(oVEX)
+19: vbroadcastsd /r (66),(oVEX),(o256)
+1a: vbroadcastf128 /r (66),(oVEX),(o256)
+1b:
+1c: pabsb Pq,Qq | pabsb Vdq,Wdq (66),(VEX),(o128)
+1d: pabsw Pq,Qq | pabsw Vdq,Wdq (66),(VEX),(o128)
+1e: pabsd Pq,Qq | pabsd Vdq,Wdq (66),(VEX),(o128)
+1f:
+# 0x0f 0x38 0x20-0x2f
+20: pmovsxbw Vdq,Udq/Mq (66),(VEX),(o128)
+21: pmovsxbd Vdq,Udq/Md (66),(VEX),(o128)
+22: pmovsxbq Vdq,Udq/Mw (66),(VEX),(o128)
+23: pmovsxwd Vdq,Udq/Mq (66),(VEX),(o128)
+24: pmovsxwq Vdq,Udq/Md (66),(VEX),(o128)
+25: pmovsxdq Vdq,Udq/Mq (66),(VEX),(o128)
+26:
+27:
+28: pmuldq Vdq,Wdq (66),(VEX),(o128)
+29: pcmpeqq Vdq,Wdq (66),(VEX),(o128)
+2a: movntdqa Vdq,Mdq (66),(VEX),(o128)
+2b: packusdw Vdq,Wdq (66),(VEX),(o128)
+2c: vmaskmovps(ld) /r (66),(oVEX)
+2d: vmaskmovpd(ld) /r (66),(oVEX)
+2e: vmaskmovps(st) /r (66),(oVEX)
+2f: vmaskmovpd(st) /r (66),(oVEX)
+# 0x0f 0x38 0x30-0x3f
+30: pmovzxbw Vdq,Udq/Mq (66),(VEX),(o128)
+31: pmovzxbd Vdq,Udq/Md (66),(VEX),(o128)
+32: pmovzxbq Vdq,Udq/Mw (66),(VEX),(o128)
+33: pmovzxwd Vdq,Udq/Mq (66),(VEX),(o128)
+34: pmovzxwq Vdq,Udq/Md (66),(VEX),(o128)
+35: pmovzxdq Vdq,Udq/Mq (66),(VEX),(o128)
+36:
+37: pcmpgtq Vdq,Wdq (66),(VEX),(o128)
+38: pminsb Vdq,Wdq (66),(VEX),(o128)
+39: pminsd Vdq,Wdq (66),(VEX),(o128)
+3a: pminuw Vdq,Wdq (66),(VEX),(o128)
+3b: pminud Vdq,Wdq (66),(VEX),(o128)
+3c: pmaxsb Vdq,Wdq (66),(VEX),(o128)
+3d: pmaxsd Vdq,Wdq (66),(VEX),(o128)
+3e: pmaxuw Vdq,Wdq (66),(VEX),(o128)
+3f: pmaxud Vdq,Wdq (66),(VEX),(o128)
+# 0x0f 0x38 0x40-0x8f
+40: pmulld Vdq,Wdq (66),(VEX),(o128)
+41: phminposuw Vdq,Wdq (66),(VEX),(o128)
+80: INVEPT Gd/q,Mdq (66)
+81: INVPID Gd/q,Mdq (66)
+# 0x0f 0x38 0x90-0xbf (FMA)
+96: vfmaddsub132pd/ps /r (66),(VEX)
+97: vfmsubadd132pd/ps /r (66),(VEX)
+98: vfmadd132pd/ps /r (66),(VEX)
+99: vfmadd132sd/ss /r (66),(VEX),(o128)
+9a: vfmsub132pd/ps /r (66),(VEX)
+9b: vfmsub132sd/ss /r (66),(VEX),(o128)
+9c: vfnmadd132pd/ps /r (66),(VEX)
+9d: vfnmadd132sd/ss /r (66),(VEX),(o128)
+9e: vfnmsub132pd/ps /r (66),(VEX)
+9f: vfnmsub132sd/ss /r (66),(VEX),(o128)
+a6: vfmaddsub213pd/ps /r (66),(VEX)
+a7: vfmsubadd213pd/ps /r (66),(VEX)
+a8: vfmadd213pd/ps /r (66),(VEX)
+a9: vfmadd213sd/ss /r (66),(VEX),(o128)
+aa: vfmsub213pd/ps /r (66),(VEX)
+ab: vfmsub213sd/ss /r (66),(VEX),(o128)
+ac: vfnmadd213pd/ps /r (66),(VEX)
+ad: vfnmadd213sd/ss /r (66),(VEX),(o128)
+ae: vfnmsub213pd/ps /r (66),(VEX)
+af: vfnmsub213sd/ss /r (66),(VEX),(o128)
+b6: vfmaddsub231pd/ps /r (66),(VEX)
+b7: vfmsubadd231pd/ps /r (66),(VEX)
+b8: vfmadd231pd/ps /r (66),(VEX)
+b9: vfmadd231sd/ss /r (66),(VEX),(o128)
+ba: vfmsub231pd/ps /r (66),(VEX)
+bb: vfmsub231sd/ss /r (66),(VEX),(o128)
+bc: vfnmadd231pd/ps /r (66),(VEX)
+bd: vfnmadd231sd/ss /r (66),(VEX),(o128)
+be: vfnmsub231pd/ps /r (66),(VEX)
+bf: vfnmsub231sd/ss /r (66),(VEX),(o128)
+# 0x0f 0x38 0xc0-0xff
+db: aesimc Vdq,Wdq (66),(VEX),(o128)
+dc: aesenc Vdq,Wdq (66),(VEX),(o128)
+dd: aesenclast Vdq,Wdq (66),(VEX),(o128)
+de: aesdec Vdq,Wdq (66),(VEX),(o128)
+df: aesdeclast Vdq,Wdq (66),(VEX),(o128)
+f0: MOVBE Gv,Mv | CRC32 Gd,Eb (F2)
+f1: MOVBE Mv,Gv | CRC32 Gd,Ev (F2)
+EndTable
+
+Table: 3-byte opcode 2 (0x0f 0x3a)
+Referrer: 3-byte escape 2
+AVXcode: 3
+# 0x0f 0x3a 0x00-0xff
+04: vpermilps /r,Ib (66),(oVEX)
+05: vpermilpd /r,Ib (66),(oVEX)
+06: vperm2f128 /r,Ib (66),(oVEX),(o256)
+08: roundps Vdq,Wdq,Ib (66),(VEX)
+09: roundpd Vdq,Wdq,Ib (66),(VEX)
+0a: roundss Vss,Wss,Ib (66),(VEX),(o128)
+0b: roundsd Vsd,Wsd,Ib (66),(VEX),(o128)
+0c: blendps Vdq,Wdq,Ib (66),(VEX)
+0d: blendpd Vdq,Wdq,Ib (66),(VEX)
+0e: pblendw Vdq,Wdq,Ib (66),(VEX),(o128)
+0f: palignr Pq,Qq,Ib | palignr Vdq,Wdq,Ib (66),(VEX),(o128)
+14: pextrb Rd/Mb,Vdq,Ib (66),(VEX),(o128)
+15: pextrw Rd/Mw,Vdq,Ib (66),(VEX),(o128)
+16: pextrd/pextrq Ed/q,Vdq,Ib (66),(VEX),(o128)
+17: extractps Ed,Vdq,Ib (66),(VEX),(o128)
+18: vinsertf128 /r,Ib (66),(oVEX),(o256)
+19: vextractf128 /r,Ib (66),(oVEX),(o256)
+20: pinsrb Vdq,Rd/q/Mb,Ib (66),(VEX),(o128)
+21: insertps Vdq,Udq/Md,Ib (66),(VEX),(o128)
+22: pinsrd/pinsrq Vdq,Ed/q,Ib (66),(VEX),(o128)
+40: dpps Vdq,Wdq,Ib (66),(VEX)
+41: dppd Vdq,Wdq,Ib (66),(VEX),(o128)
+42: mpsadbw Vdq,Wdq,Ib (66),(VEX),(o128)
+44: pclmulq Vdq,Wdq,Ib (66),(VEX),(o128)
+4a: vblendvps /r,Ib (66),(oVEX)
+4b: vblendvpd /r,Ib (66),(oVEX)
+4c: vpblendvb /r,Ib (66),(oVEX),(o128)
+60: pcmpestrm Vdq,Wdq,Ib (66),(VEX),(o128)
+61: pcmpestri Vdq,Wdq,Ib (66),(VEX),(o128)
+62: pcmpistrm Vdq,Wdq,Ib (66),(VEX),(o128)
+63: pcmpistri Vdq,Wdq,Ib (66),(VEX),(o128)
+df: aeskeygenassist Vdq,Wdq,Ib (66),(VEX),(o128)
+EndTable
+
+GrpTable: Grp1
+0: ADD
+1: OR
+2: ADC
+3: SBB
+4: AND
+5: SUB
+6: XOR
+7: CMP
+EndTable
+
+GrpTable: Grp1A
+0: POP
+EndTable
+
+GrpTable: Grp2
+0: ROL
+1: ROR
+2: RCL
+3: RCR
+4: SHL/SAL
+5: SHR
+6:
+7: SAR
+EndTable
+
+GrpTable: Grp3_1
+0: TEST Eb,Ib
+1:
+2: NOT Eb
+3: NEG Eb
+4: MUL AL,Eb
+5: IMUL AL,Eb
+6: DIV AL,Eb
+7: IDIV AL,Eb
+EndTable
+
+GrpTable: Grp3_2
+0: TEST Ev,Iz
+1:
+2: NOT Ev
+3: NEG Ev
+4: MUL rAX,Ev
+5: IMUL rAX,Ev
+6: DIV rAX,Ev
+7: IDIV rAX,Ev
+EndTable
+
+GrpTable: Grp4
+0: INC Eb
+1: DEC Eb
+EndTable
+
+GrpTable: Grp5
+0: INC Ev
+1: DEC Ev
+2: CALLN Ev (f64)
+3: CALLF Ep
+4: JMPN Ev (f64)
+5: JMPF Ep
+6: PUSH Ev (d64)
+7:
+EndTable
+
+GrpTable: Grp6
+0: SLDT Rv/Mw
+1: STR Rv/Mw
+2: LLDT Ew
+3: LTR Ew
+4: VERR Ew
+5: VERW Ew
+EndTable
+
+GrpTable: Grp7
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B)
+3: LIDT Ms
+4: SMSW Mw/Rv
+5:
+6: LMSW Ew
+7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B)
+EndTable
+
+GrpTable: Grp8
+4: BT
+5: BTS
+6: BTR
+7: BTC
+EndTable
+
+GrpTable: Grp9
+1: CMPXCHG8B/16B Mq/Mdq
+6: VMPTRLD Mq | VMCLEAR Mq (66) | VMXON Mq (F3)
+7: VMPTRST Mq
+EndTable
+
+GrpTable: Grp10
+EndTable
+
+GrpTable: Grp11
+0: MOV
+EndTable
+
+GrpTable: Grp12
+2: psrlw Nq,Ib (11B) | psrlw Udq,Ib (66),(11B),(VEX),(o128)
+4: psraw Nq,Ib (11B) | psraw Udq,Ib (66),(11B),(VEX),(o128)
+6: psllw Nq,Ib (11B) | psllw Udq,Ib (66),(11B),(VEX),(o128)
+EndTable
+
+GrpTable: Grp13
+2: psrld Nq,Ib (11B) | psrld Udq,Ib (66),(11B),(VEX),(o128)
+4: psrad Nq,Ib (11B) | psrad Udq,Ib (66),(11B),(VEX),(o128)
+6: pslld Nq,Ib (11B) | pslld Udq,Ib (66),(11B),(VEX),(o128)
+EndTable
+
+GrpTable: Grp14
+2: psrlq Nq,Ib (11B) | psrlq Udq,Ib (66),(11B),(VEX),(o128)
+3: psrldq Udq,Ib (66),(11B),(VEX),(o128)
+6: psllq Nq,Ib (11B) | psllq Udq,Ib (66),(11B),(VEX),(o128)
+7: pslldq Udq,Ib (66),(11B),(VEX),(o128)
+EndTable
+
+GrpTable: Grp15
+0: fxsave
+1: fxstor
+2: ldmxcsr (VEX)
+3: stmxcsr (VEX)
+4: XSAVE
+5: XRSTOR | lfence (11B)
+6: mfence (11B)
+7: clflush | sfence (11B)
+EndTable
+
+GrpTable: Grp16
+0: prefetch NTA
+1: prefetch T0
+2: prefetch T1
+3: prefetch T2
+EndTable
+
+# AMD's Prefetch Group
+GrpTable: GrpP
+0: PREFETCH
+1: PREFETCHW
+EndTable
+
+GrpTable: GrpPDLK
+0: MONTMUL
+1: XSHA1
+2: XSHA2
+EndTable
+
+GrpTable: GrpRNG
+0: xstore-rng
+1: xcrypt-ecb
+2: xcrypt-cbc
+4: xcrypt-cfb
+5: xcrypt-ofb
+EndTable
diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c
index 61b41ca3b5a2..d0474ad2a6e5 100644
--- a/arch/x86/mm/extable.c
+++ b/arch/x86/mm/extable.c
@@ -35,34 +35,3 @@ int fixup_exception(struct pt_regs *regs)
 
 	return 0;
 }
-
-#ifdef CONFIG_X86_64
-/*
- * Need to defined our own search_extable on X86_64 to work around
- * a B stepping K8 bug.
- */
-const struct exception_table_entry *
-search_extable(const struct exception_table_entry *first,
-	       const struct exception_table_entry *last,
-	       unsigned long value)
-{
-	/* B stepping K8 bug */
-	if ((value >> 32) == 0)
-		value |= 0xffffffffUL << 32;
-
-	while (first <= last) {
-		const struct exception_table_entry *mid;
-		long diff;
-
-		mid = (last - first) / 2 + first;
-		diff = mid->insn - value;
-		if (diff == 0)
-			return mid;
-		else if (diff < 0)
-			first = mid+1;
-		else
-			last = mid-1;
-	}
-	return NULL;
-}
-#endif
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index f4cee9028cf0..f62777940dfb 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -38,7 +38,8 @@ enum x86_pf_error_code {
  * Returns 0 if mmiotrace is disabled, or if the fault is not
  * handled by mmiotrace:
  */
-static inline int kmmio_fault(struct pt_regs *regs, unsigned long addr)
+static inline int __kprobes
+kmmio_fault(struct pt_regs *regs, unsigned long addr)
 {
 	if (unlikely(is_kmmio_active()))
 		if (kmmio_handler(regs, addr) == 1)
@@ -46,7 +47,7 @@ static inline int kmmio_fault(struct pt_regs *regs, unsigned long addr)
 	return 0;
 }
 
-static inline int notify_page_fault(struct pt_regs *regs)
+static inline int __kprobes notify_page_fault(struct pt_regs *regs)
 {
 	int ret = 0;
 
@@ -240,7 +241,7 @@ void vmalloc_sync_all(void)
  *
  *   Handle a fault on the vmalloc or module mapping area
  */
-static noinline int vmalloc_fault(unsigned long address)
+static noinline __kprobes int vmalloc_fault(unsigned long address)
 {
 	unsigned long pgd_paddr;
 	pmd_t *pmd_k;
@@ -357,7 +358,7 @@ void vmalloc_sync_all(void)
  *
  * This assumes no large pages in there.
  */
-static noinline int vmalloc_fault(unsigned long address)
+static noinline __kprobes int vmalloc_fault(unsigned long address)
 {
 	pgd_t *pgd, *pgd_ref;
 	pud_t *pud, *pud_ref;
@@ -658,7 +659,7 @@ no_context(struct pt_regs *regs, unsigned long error_code,
 	show_fault_oops(regs, error_code, address);
 
 	stackend = end_of_stack(tsk);
-	if (*stackend != STACK_END_MAGIC)
+	if (tsk != &init_task && *stackend != STACK_END_MAGIC)
 		printk(KERN_ALERT "Thread overran stack, or stack corrupted\n");
 
 	tsk->thread.cr2		= address;
@@ -860,7 +861,7 @@ static int spurious_fault_check(unsigned long error_code, pte_t *pte)
  * There are no security implications to leaving a stale TLB when
  * increasing the permissions on a page.
  */
-static noinline int
+static noinline __kprobes int
 spurious_fault(unsigned long error_code, unsigned long address)
 {
 	pgd_t *pgd;
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 73ffd5536f62..d406c5239019 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -146,10 +146,6 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 	use_gbpages = direct_gbpages;
 #endif
 
-	set_nx();
-	if (nx_enabled)
-		printk(KERN_INFO "NX (Execute Disable) protection: active\n");
-
 	/* Enable PSE if available */
 	if (cpu_has_pse)
 		set_in_cr4(X86_CR4_PSE);
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 30938c1d8d5d..c973f8e2a6cf 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -412,7 +412,7 @@ static void __init permanent_kmaps_init(pgd_t *pgd_base)
 	pkmap_page_table = pte;
 }
 
-static void __init add_one_highpage_init(struct page *page, int pfn)
+static void __init add_one_highpage_init(struct page *page)
 {
 	ClearPageReserved(page);
 	init_page_count(page);
@@ -445,7 +445,7 @@ static int __init add_highpages_work_fn(unsigned long start_pfn,
 		if (!pfn_valid(node_pfn))
 			continue;
 		page = pfn_to_page(node_pfn);
-		add_one_highpage_init(page, node_pfn);
+		add_one_highpage_init(page);
 	}
 
 	return 0;
@@ -703,8 +703,8 @@ void __init find_low_pfn_range(void)
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-void __init initmem_init(unsigned long start_pfn,
-				  unsigned long end_pfn)
+void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,
+				int acpi, int k8)
 {
 #ifdef CONFIG_HIGHMEM
 	highstart_pfn = highend_pfn = max_pfn;
@@ -997,7 +997,7 @@ static noinline int do_test_wp_bit(void)
 const int rodata_test_data = 0xC3;
 EXPORT_SYMBOL_GPL(rodata_test_data);
 
-static int kernel_set_to_readonly;
+int kernel_set_to_readonly __read_mostly;
 
 void set_kernel_text_rw(void)
 {
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 5a4398a6006b..5198b9bb34ef 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -568,7 +568,8 @@ kernel_physical_mapping_init(unsigned long start,
 }
 
 #ifndef CONFIG_NUMA
-void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn)
+void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,
+				int acpi, int k8)
 {
 	unsigned long bootmap_size, bootmap;
 
@@ -694,12 +695,12 @@ void __init mem_init(void)
 const int rodata_test_data = 0xC3;
 EXPORT_SYMBOL_GPL(rodata_test_data);
 
-static int kernel_set_to_readonly;
+int kernel_set_to_readonly;
 
 void set_kernel_text_rw(void)
 {
-	unsigned long start = PFN_ALIGN(_stext);
-	unsigned long end = PFN_ALIGN(__start_rodata);
+	unsigned long start = PFN_ALIGN(_text);
+	unsigned long end = PFN_ALIGN(__stop___ex_table);
 
 	if (!kernel_set_to_readonly)
 		return;
@@ -707,13 +708,18 @@ void set_kernel_text_rw(void)
 	pr_debug("Set kernel text: %lx - %lx for read write\n",
 		 start, end);
 
+	/*
+	 * Make the kernel identity mapping for text RW. Kernel text
+	 * mapping will always be RO. Refer to the comment in
+	 * static_protections() in pageattr.c
+	 */
 	set_memory_rw(start, (end - start) >> PAGE_SHIFT);
 }
 
 void set_kernel_text_ro(void)
 {
-	unsigned long start = PFN_ALIGN(_stext);
-	unsigned long end = PFN_ALIGN(__start_rodata);
+	unsigned long start = PFN_ALIGN(_text);
+	unsigned long end = PFN_ALIGN(__stop___ex_table);
 
 	if (!kernel_set_to_readonly)
 		return;
@@ -721,14 +727,21 @@ void set_kernel_text_ro(void)
 	pr_debug("Set kernel text: %lx - %lx for read only\n",
 		 start, end);
 
+	/*
+	 * Set the kernel identity mapping for text RO.
+	 */
 	set_memory_ro(start, (end - start) >> PAGE_SHIFT);
 }
 
 void mark_rodata_ro(void)
 {
-	unsigned long start = PFN_ALIGN(_stext), end = PFN_ALIGN(__end_rodata);
+	unsigned long start = PFN_ALIGN(_text);
 	unsigned long rodata_start =
 		((unsigned long)__start_rodata + PAGE_SIZE - 1) & PAGE_MASK;
+	unsigned long end = (unsigned long) &__end_rodata_hpage_align;
+	unsigned long text_end = PAGE_ALIGN((unsigned long) &__stop___ex_table);
+	unsigned long rodata_end = PAGE_ALIGN((unsigned long) &__end_rodata);
+	unsigned long data_start = (unsigned long) &_sdata;
 
 	printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
 	       (end - start) >> 10);
@@ -751,6 +764,14 @@ void mark_rodata_ro(void)
 	printk(KERN_INFO "Testing CPA: again\n");
 	set_memory_ro(start, (end-start) >> PAGE_SHIFT);
 #endif
+
+	free_init_pages("unused kernel memory",
+			(unsigned long) page_address(virt_to_page(text_end)),
+			(unsigned long)
+				 page_address(virt_to_page(rodata_start)));
+	free_init_pages("unused kernel memory",
+			(unsigned long) page_address(virt_to_page(rodata_end)),
+			(unsigned long) page_address(virt_to_page(data_start)));
 }
 
 #endif
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 2feb9bdedaaf..c246d259822d 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -281,30 +281,6 @@ void __iomem *ioremap_cache(resource_size_t phys_addr, unsigned long size)
 }
 EXPORT_SYMBOL(ioremap_cache);
 
-static void __iomem *ioremap_default(resource_size_t phys_addr,
-					unsigned long size)
-{
-	unsigned long flags;
-	void __iomem *ret;
-	int err;
-
-	/*
-	 * - WB for WB-able memory and no other conflicting mappings
-	 * - UC_MINUS for non-WB-able memory with no other conflicting mappings
-	 * - Inherit from confliting mappings otherwise
-	 */
-	err = reserve_memtype(phys_addr, phys_addr + size,
-				_PAGE_CACHE_WB, &flags);
-	if (err < 0)
-		return NULL;
-
-	ret = __ioremap_caller(phys_addr, size, flags,
-			       __builtin_return_address(0));
-
-	free_memtype(phys_addr, phys_addr + size);
-	return ret;
-}
-
 void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size,
 				unsigned long prot_val)
 {
@@ -380,7 +356,7 @@ void *xlate_dev_mem_ptr(unsigned long phys)
 	if (page_is_ram(start >> PAGE_SHIFT))
 		return __va(phys);
 
-	addr = (void __force *)ioremap_default(start, PAGE_SIZE);
+	addr = (void __force *)ioremap_cache(start, PAGE_SIZE);
 	if (addr)
 		addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK));
 
diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c
index 268f8255280f..970ed579d4e4 100644
--- a/arch/x86/mm/k8topology_64.c
+++ b/arch/x86/mm/k8topology_64.c
@@ -24,6 +24,9 @@
 #include <asm/apic.h>
 #include <asm/k8.h>
 
+static struct bootnode __initdata nodes[8];
+static nodemask_t __initdata nodes_parsed = NODE_MASK_NONE;
+
 static __init int find_northbridge(void)
 {
 	int num;
@@ -54,18 +57,6 @@ static __init void early_get_boot_cpu_id(void)
 	 * need to get boot_cpu_id so can use that to create apicid_to_node
 	 * in k8_scan_nodes()
 	 */
-	/*
-	 * Find possible boot-time SMP configuration:
-	 */
-#ifdef CONFIG_X86_MPPARSE
-	early_find_smp_config();
-#endif
-#ifdef CONFIG_ACPI
-	/*
-	 * Read APIC information from ACPI tables.
-	 */
-	early_acpi_boot_init();
-#endif
 #ifdef CONFIG_X86_MPPARSE
 	/*
 	 * get boot-time SMP configuration:
@@ -76,12 +67,26 @@ static __init void early_get_boot_cpu_id(void)
 	early_init_lapic_mapping();
 }
 
-int __init k8_scan_nodes(unsigned long start, unsigned long end)
+int __init k8_get_nodes(struct bootnode *physnodes)
 {
-	unsigned numnodes, cores, bits, apicid_base;
+	int i;
+	int ret = 0;
+
+	for_each_node_mask(i, nodes_parsed) {
+		physnodes[ret].start = nodes[i].start;
+		physnodes[ret].end = nodes[i].end;
+		ret++;
+	}
+	return ret;
+}
+
+int __init k8_numa_init(unsigned long start_pfn, unsigned long end_pfn)
+{
+	unsigned long start = PFN_PHYS(start_pfn);
+	unsigned long end = PFN_PHYS(end_pfn);
+	unsigned numnodes;
 	unsigned long prevbase;
-	struct bootnode nodes[8];
-	int i, j, nb, found = 0;
+	int i, nb, found = 0;
 	u32 nodeid, reg;
 
 	if (!early_pci_allowed())
@@ -91,16 +96,15 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 	if (nb < 0)
 		return nb;
 
-	printk(KERN_INFO "Scanning NUMA topology in Northbridge %d\n", nb);
+	pr_info("Scanning NUMA topology in Northbridge %d\n", nb);
 
 	reg = read_pci_config(0, nb, 0, 0x60);
 	numnodes = ((reg >> 4) & 0xF) + 1;
 	if (numnodes <= 1)
 		return -1;
 
-	printk(KERN_INFO "Number of nodes %d\n", numnodes);
+	pr_info("Number of physical nodes %d\n", numnodes);
 
-	memset(&nodes, 0, sizeof(nodes));
 	prevbase = 0;
 	for (i = 0; i < 8; i++) {
 		unsigned long base, limit;
@@ -111,28 +115,28 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 		nodeid = limit & 7;
 		if ((base & 3) == 0) {
 			if (i < numnodes)
-				printk("Skipping disabled node %d\n", i);
+				pr_info("Skipping disabled node %d\n", i);
 			continue;
 		}
 		if (nodeid >= numnodes) {
-			printk("Ignoring excess node %d (%lx:%lx)\n", nodeid,
-			       base, limit);
+			pr_info("Ignoring excess node %d (%lx:%lx)\n", nodeid,
+				base, limit);
 			continue;
 		}
 
 		if (!limit) {
-			printk(KERN_INFO "Skipping node entry %d (base %lx)\n",
-			       i, base);
+			pr_info("Skipping node entry %d (base %lx)\n",
+				i, base);
 			continue;
 		}
 		if ((base >> 8) & 3 || (limit >> 8) & 3) {
-			printk(KERN_ERR "Node %d using interleaving mode %lx/%lx\n",
-			       nodeid, (base>>8)&3, (limit>>8) & 3);
+			pr_err("Node %d using interleaving mode %lx/%lx\n",
+			       nodeid, (base >> 8) & 3, (limit >> 8) & 3);
 			return -1;
 		}
-		if (node_isset(nodeid, node_possible_map)) {
-			printk(KERN_INFO "Node %d already present. Skipping\n",
-			       nodeid);
+		if (node_isset(nodeid, nodes_parsed)) {
+			pr_info("Node %d already present, skipping\n",
+				nodeid);
 			continue;
 		}
 
@@ -141,8 +145,8 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 		limit |= (1<<24)-1;
 		limit++;
 
-		if (limit > max_pfn << PAGE_SHIFT)
-			limit = max_pfn << PAGE_SHIFT;
+		if (limit > end)
+			limit = end;
 		if (limit <= base)
 			continue;
 
@@ -154,24 +158,24 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 		if (limit > end)
 			limit = end;
 		if (limit == base) {
-			printk(KERN_ERR "Empty node %d\n", nodeid);
+			pr_err("Empty node %d\n", nodeid);
 			continue;
 		}
 		if (limit < base) {
-			printk(KERN_ERR "Node %d bogus settings %lx-%lx.\n",
+			pr_err("Node %d bogus settings %lx-%lx.\n",
 			       nodeid, base, limit);
 			continue;
 		}
 
 		/* Could sort here, but pun for now. Should not happen anyroads. */
 		if (prevbase > base) {
-			printk(KERN_ERR "Node map not sorted %lx,%lx\n",
+			pr_err("Node map not sorted %lx,%lx\n",
 			       prevbase, base);
 			return -1;
 		}
 
-		printk(KERN_INFO "Node %d MemBase %016lx Limit %016lx\n",
-		       nodeid, base, limit);
+		pr_info("Node %d MemBase %016lx Limit %016lx\n",
+			nodeid, base, limit);
 
 		found++;
 
@@ -180,18 +184,29 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 
 		prevbase = base;
 
-		node_set(nodeid, node_possible_map);
+		node_set(nodeid, nodes_parsed);
 	}
 
 	if (!found)
 		return -1;
+	return 0;
+}
+
+int __init k8_scan_nodes(void)
+{
+	unsigned int bits;
+	unsigned int cores;
+	unsigned int apicid_base;
+	int i;
 
+	BUG_ON(nodes_empty(nodes_parsed));
+	node_possible_map = nodes_parsed;
 	memnode_shift = compute_hash_shift(nodes, 8, NULL);
 	if (memnode_shift < 0) {
-		printk(KERN_ERR "No NUMA node hash function found. Contact maintainer\n");
+		pr_err("No NUMA node hash function found. Contact maintainer\n");
 		return -1;
 	}
-	printk(KERN_INFO "Using node hash shift of %d\n", memnode_shift);
+	pr_info("Using node hash shift of %d\n", memnode_shift);
 
 	/* use the coreid bits from early_identify_cpu */
 	bits = boot_cpu_data.x86_coreid_bits;
@@ -200,14 +215,12 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 	/* need to get boot_cpu_id early for system with apicid lifting */
 	early_get_boot_cpu_id();
 	if (boot_cpu_physical_apicid > 0) {
-		printk(KERN_INFO "BSP APIC ID: %02x\n",
-				 boot_cpu_physical_apicid);
+		pr_info("BSP APIC ID: %02x\n", boot_cpu_physical_apicid);
 		apicid_base = boot_cpu_physical_apicid;
 	}
 
-	for (i = 0; i < 8; i++) {
-		if (nodes[i].start == nodes[i].end)
-			continue;
+	for_each_node_mask(i, node_possible_map) {
+		int j;
 
 		e820_register_active_regions(i,
 				nodes[i].start >> PAGE_SHIFT,
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 16ccbd77917f..c0f6198565eb 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -5,6 +5,8 @@
  *     2008 Pekka Paalanen <pq@iki.fi>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/list.h>
 #include <linux/rculist.h>
 #include <linux/spinlock.h>
@@ -136,7 +138,7 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 	pte_t *pte = lookup_address(f->page, &level);
 
 	if (!pte) {
-		pr_err("kmmio: no pte for page 0x%08lx\n", f->page);
+		pr_err("no pte for page 0x%08lx\n", f->page);
 		return -1;
 	}
 
@@ -148,7 +150,7 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 		clear_pte_presence(pte, clear, &f->old_presence);
 		break;
 	default:
-		pr_err("kmmio: unexpected page level 0x%x.\n", level);
+		pr_err("unexpected page level 0x%x.\n", level);
 		return -1;
 	}
 
@@ -170,13 +172,14 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 static int arm_kmmio_fault_page(struct kmmio_fault_page *f)
 {
 	int ret;
-	WARN_ONCE(f->armed, KERN_ERR "kmmio page already armed.\n");
+	WARN_ONCE(f->armed, KERN_ERR pr_fmt("kmmio page already armed.\n"));
 	if (f->armed) {
-		pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n",
-					f->page, f->count, !!f->old_presence);
+		pr_warning("double-arm: page 0x%08lx, ref %d, old %d\n",
+			   f->page, f->count, !!f->old_presence);
 	}
 	ret = clear_page_presence(f, true);
-	WARN_ONCE(ret < 0, KERN_ERR "kmmio arming 0x%08lx failed.\n", f->page);
+	WARN_ONCE(ret < 0, KERN_ERR pr_fmt("arming 0x%08lx failed.\n"),
+		  f->page);
 	f->armed = true;
 	return ret;
 }
@@ -203,7 +206,7 @@ static void disarm_kmmio_fault_page(struct kmmio_fault_page *f)
  */
 /*
  * Interrupts are disabled on entry as trap3 is an interrupt gate
- * and they remain disabled thorough out this function.
+ * and they remain disabled throughout this function.
  */
 int kmmio_handler(struct pt_regs *regs, unsigned long addr)
 {
@@ -240,24 +243,21 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr)
 			 * condition needs handling by do_page_fault(), the
 			 * page really not being present is the most common.
 			 */
-			pr_debug("kmmio: secondary hit for 0x%08lx CPU %d.\n",
-					addr, smp_processor_id());
+			pr_debug("secondary hit for 0x%08lx CPU %d.\n",
+				 addr, smp_processor_id());
 
 			if (!faultpage->old_presence)
-				pr_info("kmmio: unexpected secondary hit for "
-					"address 0x%08lx on CPU %d.\n", addr,
-					smp_processor_id());
+				pr_info("unexpected secondary hit for address 0x%08lx on CPU %d.\n",
+					addr, smp_processor_id());
 		} else {
 			/*
 			 * Prevent overwriting already in-flight context.
 			 * This should not happen, let's hope disarming at
 			 * least prevents a panic.
 			 */
-			pr_emerg("kmmio: recursive probe hit on CPU %d, "
-					"for address 0x%08lx. Ignoring.\n",
-					smp_processor_id(), addr);
-			pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
-						ctx->addr);
+			pr_emerg("recursive probe hit on CPU %d, for address 0x%08lx. Ignoring.\n",
+				 smp_processor_id(), addr);
+			pr_emerg("previous hit was at 0x%08lx.\n", ctx->addr);
 			disarm_kmmio_fault_page(faultpage);
 		}
 		goto no_kmmio_ctx;
@@ -302,7 +302,7 @@ no_kmmio:
 
 /*
  * Interrupts are disabled on entry as trap1 is an interrupt gate
- * and they remain disabled thorough out this function.
+ * and they remain disabled throughout this function.
  * This must always get called as the pair to kmmio_handler().
  */
 static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs)
@@ -316,8 +316,8 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs)
 		 * something external causing them (f.e. using a debugger while
 		 * mmio tracing enabled), or erroneous behaviour
 		 */
-		pr_warning("kmmio: unexpected debug trap on CPU %d.\n",
-							smp_processor_id());
+		pr_warning("unexpected debug trap on CPU %d.\n",
+			   smp_processor_id());
 		goto out;
 	}
 
@@ -425,7 +425,7 @@ int register_kmmio_probe(struct kmmio_probe *p)
 	list_add_rcu(&p->list, &kmmio_probes);
 	while (size < size_lim) {
 		if (add_kmmio_fault_page(p->addr + size))
-			pr_err("kmmio: Unable to set page fault.\n");
+			pr_err("Unable to set page fault.\n");
 		size += PAGE_SIZE;
 	}
 out:
@@ -490,7 +490,7 @@ static void remove_kmmio_fault_pages(struct rcu_head *head)
  * 2. remove_kmmio_fault_pages()
  *    Remove the pages from kmmio_page_table.
  * 3. rcu_free_kmmio_fault_pages()
- *    Actally free the kmmio_fault_page structs as with RCU.
+ *    Actually free the kmmio_fault_page structs as with RCU.
  */
 void unregister_kmmio_probe(struct kmmio_probe *p)
 {
@@ -511,7 +511,7 @@ void unregister_kmmio_probe(struct kmmio_probe *p)
 
 	drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC);
 	if (!drelease) {
-		pr_crit("kmmio: leaking kmmio_fault_page objects.\n");
+		pr_crit("leaking kmmio_fault_page objects.\n");
 		return;
 	}
 	drelease->release_list = release_list;
@@ -540,8 +540,14 @@ kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args)
 	struct die_args *arg = args;
 
 	if (val == DIE_DEBUG && (arg->err & DR_STEP))
-		if (post_kmmio_handler(arg->err, arg->regs) == 1)
+		if (post_kmmio_handler(arg->err, arg->regs) == 1) {
+			/*
+			 * Reset the BS bit in dr6 (pointed by args->err) to
+			 * denote completion of processing
+			 */
+			(*(unsigned long *)ERR_PTR(arg->err)) &= ~DR_STEP;
 			return NOTIFY_STOP;
+		}
 
 	return NOTIFY_DONE;
 }
diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c
index 132772a8ec57..4c765e9c4664 100644
--- a/arch/x86/mm/mmio-mod.c
+++ b/arch/x86/mm/mmio-mod.c
@@ -19,6 +19,9 @@
  *
  * Derived from the read-mod example from relay-examples by Tom Zanussi.
  */
+
+#define pr_fmt(fmt) "mmiotrace: "
+
 #define DEBUG 1
 
 #include <linux/module.h>
@@ -36,8 +39,6 @@
 
 #include "pf_in.h"
 
-#define NAME "mmiotrace: "
-
 struct trap_reason {
 	unsigned long addr;
 	unsigned long ip;
@@ -96,17 +97,18 @@ static void print_pte(unsigned long address)
 	pte_t *pte = lookup_address(address, &level);
 
 	if (!pte) {
-		pr_err(NAME "Error in %s: no pte for page 0x%08lx\n",
-							__func__, address);
+		pr_err("Error in %s: no pte for page 0x%08lx\n",
+		       __func__, address);
 		return;
 	}
 
 	if (level == PG_LEVEL_2M) {
-		pr_emerg(NAME "4MB pages are not currently supported: "
-							"0x%08lx\n", address);
+		pr_emerg("4MB pages are not currently supported: 0x%08lx\n",
+			 address);
 		BUG();
 	}
-	pr_info(NAME "pte for 0x%lx: 0x%llx 0x%llx\n", address,
+	pr_info("pte for 0x%lx: 0x%llx 0x%llx\n",
+		address,
 		(unsigned long long)pte_val(*pte),
 		(unsigned long long)pte_val(*pte) & _PAGE_PRESENT);
 }
@@ -118,22 +120,21 @@ static void print_pte(unsigned long address)
 static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr)
 {
 	const struct trap_reason *my_reason = &get_cpu_var(pf_reason);
-	pr_emerg(NAME "unexpected fault for address: 0x%08lx, "
-					"last fault for address: 0x%08lx\n",
-					addr, my_reason->addr);
+	pr_emerg("unexpected fault for address: 0x%08lx, last fault for address: 0x%08lx\n",
+		 addr, my_reason->addr);
 	print_pte(addr);
 	print_symbol(KERN_EMERG "faulting IP is at %s\n", regs->ip);
 	print_symbol(KERN_EMERG "last faulting IP was at %s\n", my_reason->ip);
 #ifdef __i386__
 	pr_emerg("eax: %08lx   ebx: %08lx   ecx: %08lx   edx: %08lx\n",
-			regs->ax, regs->bx, regs->cx, regs->dx);
+		 regs->ax, regs->bx, regs->cx, regs->dx);
 	pr_emerg("esi: %08lx   edi: %08lx   ebp: %08lx   esp: %08lx\n",
-			regs->si, regs->di, regs->bp, regs->sp);
+		 regs->si, regs->di, regs->bp, regs->sp);
 #else
 	pr_emerg("rax: %016lx   rcx: %016lx   rdx: %016lx\n",
-					regs->ax, regs->cx, regs->dx);
+		 regs->ax, regs->cx, regs->dx);
 	pr_emerg("rsi: %016lx   rdi: %016lx   rbp: %016lx   rsp: %016lx\n",
-				regs->si, regs->di, regs->bp, regs->sp);
+		 regs->si, regs->di, regs->bp, regs->sp);
 #endif
 	put_cpu_var(pf_reason);
 	BUG();
@@ -213,7 +214,7 @@ static void post(struct kmmio_probe *p, unsigned long condition,
 	/* this should always return the active_trace count to 0 */
 	my_reason->active_traces--;
 	if (my_reason->active_traces) {
-		pr_emerg(NAME "unexpected post handler");
+		pr_emerg("unexpected post handler");
 		BUG();
 	}
 
@@ -244,7 +245,7 @@ static void ioremap_trace_core(resource_size_t offset, unsigned long size,
 	};
 
 	if (!trace) {
-		pr_err(NAME "kmalloc failed in ioremap\n");
+		pr_err("kmalloc failed in ioremap\n");
 		return;
 	}
 
@@ -282,8 +283,8 @@ void mmiotrace_ioremap(resource_size_t offset, unsigned long size,
 	if (!is_enabled()) /* recheck and proper locking in *_core() */
 		return;
 
-	pr_debug(NAME "ioremap_*(0x%llx, 0x%lx) = %p\n",
-				(unsigned long long)offset, size, addr);
+	pr_debug("ioremap_*(0x%llx, 0x%lx) = %p\n",
+		 (unsigned long long)offset, size, addr);
 	if ((filter_offset) && (offset != filter_offset))
 		return;
 	ioremap_trace_core(offset, size, addr);
@@ -301,7 +302,7 @@ static void iounmap_trace_core(volatile void __iomem *addr)
 	struct remap_trace *tmp;
 	struct remap_trace *found_trace = NULL;
 
-	pr_debug(NAME "Unmapping %p.\n", addr);
+	pr_debug("Unmapping %p.\n", addr);
 
 	spin_lock_irq(&trace_lock);
 	if (!is_enabled())
@@ -363,9 +364,8 @@ static void clear_trace_list(void)
 	 * Caller also ensures is_enabled() cannot change.
 	 */
 	list_for_each_entry(trace, &trace_list, list) {
-		pr_notice(NAME "purging non-iounmapped "
-					"trace @0x%08lx, size 0x%lx.\n",
-					trace->probe.addr, trace->probe.len);
+		pr_notice("purging non-iounmapped trace @0x%08lx, size 0x%lx.\n",
+			  trace->probe.addr, trace->probe.len);
 		if (!nommiotrace)
 			unregister_kmmio_probe(&trace->probe);
 	}
@@ -387,7 +387,7 @@ static void enter_uniprocessor(void)
 
 	if (downed_cpus == NULL &&
 	    !alloc_cpumask_var(&downed_cpus, GFP_KERNEL)) {
-		pr_notice(NAME "Failed to allocate mask\n");
+		pr_notice("Failed to allocate mask\n");
 		goto out;
 	}
 
@@ -395,20 +395,19 @@ static void enter_uniprocessor(void)
 	cpumask_copy(downed_cpus, cpu_online_mask);
 	cpumask_clear_cpu(cpumask_first(cpu_online_mask), downed_cpus);
 	if (num_online_cpus() > 1)
-		pr_notice(NAME "Disabling non-boot CPUs...\n");
+		pr_notice("Disabling non-boot CPUs...\n");
 	put_online_cpus();
 
 	for_each_cpu(cpu, downed_cpus) {
 		err = cpu_down(cpu);
 		if (!err)
-			pr_info(NAME "CPU%d is down.\n", cpu);
+			pr_info("CPU%d is down.\n", cpu);
 		else
-			pr_err(NAME "Error taking CPU%d down: %d\n", cpu, err);
+			pr_err("Error taking CPU%d down: %d\n", cpu, err);
 	}
 out:
 	if (num_online_cpus() > 1)
-		pr_warning(NAME "multiple CPUs still online, "
-						"may miss events.\n");
+		pr_warning("multiple CPUs still online, may miss events.\n");
 }
 
 /* __ref because leave_uniprocessor calls cpu_up which is __cpuinit,
@@ -420,13 +419,13 @@ static void __ref leave_uniprocessor(void)
 
 	if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0)
 		return;
-	pr_notice(NAME "Re-enabling CPUs...\n");
+	pr_notice("Re-enabling CPUs...\n");
 	for_each_cpu(cpu, downed_cpus) {
 		err = cpu_up(cpu);
 		if (!err)
-			pr_info(NAME "enabled CPU%d.\n", cpu);
+			pr_info("enabled CPU%d.\n", cpu);
 		else
-			pr_err(NAME "cannot re-enable CPU%d: %d\n", cpu, err);
+			pr_err("cannot re-enable CPU%d: %d\n", cpu, err);
 	}
 }
 
@@ -434,8 +433,8 @@ static void __ref leave_uniprocessor(void)
 static void enter_uniprocessor(void)
 {
 	if (num_online_cpus() > 1)
-		pr_warning(NAME "multiple CPUs are online, may miss events. "
-			"Suggest booting with maxcpus=1 kernel argument.\n");
+		pr_warning("multiple CPUs are online, may miss events. "
+			   "Suggest booting with maxcpus=1 kernel argument.\n");
 }
 
 static void leave_uniprocessor(void)
@@ -450,13 +449,13 @@ void enable_mmiotrace(void)
 		goto out;
 
 	if (nommiotrace)
-		pr_info(NAME "MMIO tracing disabled.\n");
+		pr_info("MMIO tracing disabled.\n");
 	kmmio_init();
 	enter_uniprocessor();
 	spin_lock_irq(&trace_lock);
 	atomic_inc(&mmiotrace_enabled);
 	spin_unlock_irq(&trace_lock);
-	pr_info(NAME "enabled.\n");
+	pr_info("enabled.\n");
 out:
 	mutex_unlock(&mmiotrace_mutex);
 }
@@ -475,7 +474,7 @@ void disable_mmiotrace(void)
 	clear_trace_list(); /* guarantees: no more kmmio callbacks */
 	leave_uniprocessor();
 	kmmio_cleanup();
-	pr_info(NAME "disabled.\n");
+	pr_info("disabled.\n");
 out:
 	mutex_unlock(&mmiotrace_mutex);
 }
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index d2530062fe00..b20760ca7244 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -347,8 +347,8 @@ static void init_remap_allocator(int nid)
 		(ulong) node_remap_end_vaddr[nid]);
 }
 
-void __init initmem_init(unsigned long start_pfn,
-				  unsigned long end_pfn)
+void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,
+				int acpi, int k8)
 {
 	int nid;
 	long kva_target_pfn;
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 459913beac71..83bbc70d11bb 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -239,8 +239,14 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
 	bootmap = early_node_mem(nodeid, bootmap_start, end,
 				 bootmap_pages<<PAGE_SHIFT, PAGE_SIZE);
 	if (bootmap == NULL)  {
-		if (nodedata_phys < start || nodedata_phys >= end)
-			free_bootmem(nodedata_phys, pgdat_size);
+		if (nodedata_phys < start || nodedata_phys >= end) {
+			/*
+			 * only need to free it if it is from other node
+			 * bootmem
+			 */
+			if (nid != nodeid)
+				free_bootmem(nodedata_phys, pgdat_size);
+		}
 		node_data[nodeid] = NULL;
 		return;
 	}
@@ -306,8 +312,71 @@ void __init numa_init_array(void)
 
 #ifdef CONFIG_NUMA_EMU
 /* Numa emulation */
+static struct bootnode nodes[MAX_NUMNODES] __initdata;
+static struct bootnode physnodes[MAX_NUMNODES] __initdata;
 static char *cmdline __initdata;
 
+static int __init setup_physnodes(unsigned long start, unsigned long end,
+					int acpi, int k8)
+{
+	int nr_nodes = 0;
+	int ret = 0;
+	int i;
+
+#ifdef CONFIG_ACPI_NUMA
+	if (acpi)
+		nr_nodes = acpi_get_nodes(physnodes);
+#endif
+#ifdef CONFIG_K8_NUMA
+	if (k8)
+		nr_nodes = k8_get_nodes(physnodes);
+#endif
+	/*
+	 * Basic sanity checking on the physical node map: there may be errors
+	 * if the SRAT or K8 incorrectly reported the topology or the mem=
+	 * kernel parameter is used.
+	 */
+	for (i = 0; i < nr_nodes; i++) {
+		if (physnodes[i].start == physnodes[i].end)
+			continue;
+		if (physnodes[i].start > end) {
+			physnodes[i].end = physnodes[i].start;
+			continue;
+		}
+		if (physnodes[i].end < start) {
+			physnodes[i].start = physnodes[i].end;
+			continue;
+		}
+		if (physnodes[i].start < start)
+			physnodes[i].start = start;
+		if (physnodes[i].end > end)
+			physnodes[i].end = end;
+	}
+
+	/*
+	 * Remove all nodes that have no memory or were truncated because of the
+	 * limited address range.
+	 */
+	for (i = 0; i < nr_nodes; i++) {
+		if (physnodes[i].start == physnodes[i].end)
+			continue;
+		physnodes[ret].start = physnodes[i].start;
+		physnodes[ret].end = physnodes[i].end;
+		ret++;
+	}
+
+	/*
+	 * If no physical topology was detected, a single node is faked to cover
+	 * the entire address space.
+	 */
+	if (!ret) {
+		physnodes[ret].start = start;
+		physnodes[ret].end = end;
+		ret = 1;
+	}
+	return ret;
+}
+
 /*
  * Setups up nid to range from addr to addr + size.  If the end
  * boundary is greater than max_addr, then max_addr is used instead.
@@ -315,11 +384,9 @@ static char *cmdline __initdata;
  * allocation past addr and -1 otherwise.  addr is adjusted to be at
  * the end of the node.
  */
-static int __init setup_node_range(int nid, struct bootnode *nodes, u64 *addr,
-				   u64 size, u64 max_addr)
+static int __init setup_node_range(int nid, u64 *addr, u64 size, u64 max_addr)
 {
 	int ret = 0;
-
 	nodes[nid].start = *addr;
 	*addr += size;
 	if (*addr >= max_addr) {
@@ -335,12 +402,111 @@ static int __init setup_node_range(int nid, struct bootnode *nodes, u64 *addr,
 }
 
 /*
+ * Sets up nr_nodes fake nodes interleaved over physical nodes ranging from addr
+ * to max_addr.  The return value is the number of nodes allocated.
+ */
+static int __init split_nodes_interleave(u64 addr, u64 max_addr,
+						int nr_phys_nodes, int nr_nodes)
+{
+	nodemask_t physnode_mask = NODE_MASK_NONE;
+	u64 size;
+	int big;
+	int ret = 0;
+	int i;
+
+	if (nr_nodes <= 0)
+		return -1;
+	if (nr_nodes > MAX_NUMNODES) {
+		pr_info("numa=fake=%d too large, reducing to %d\n",
+			nr_nodes, MAX_NUMNODES);
+		nr_nodes = MAX_NUMNODES;
+	}
+
+	size = (max_addr - addr - e820_hole_size(addr, max_addr)) / nr_nodes;
+	/*
+	 * Calculate the number of big nodes that can be allocated as a result
+	 * of consolidating the remainder.
+	 */
+	big = ((size & ~FAKE_NODE_MIN_HASH_MASK) & nr_nodes) /
+		FAKE_NODE_MIN_SIZE;
+
+	size &= FAKE_NODE_MIN_HASH_MASK;
+	if (!size) {
+		pr_err("Not enough memory for each node.  "
+			"NUMA emulation disabled.\n");
+		return -1;
+	}
+
+	for (i = 0; i < nr_phys_nodes; i++)
+		if (physnodes[i].start != physnodes[i].end)
+			node_set(i, physnode_mask);
+
+	/*
+	 * Continue to fill physical nodes with fake nodes until there is no
+	 * memory left on any of them.
+	 */
+	while (nodes_weight(physnode_mask)) {
+		for_each_node_mask(i, physnode_mask) {
+			u64 end = physnodes[i].start + size;
+			u64 dma32_end = PFN_PHYS(MAX_DMA32_PFN);
+
+			if (ret < big)
+				end += FAKE_NODE_MIN_SIZE;
+
+			/*
+			 * Continue to add memory to this fake node if its
+			 * non-reserved memory is less than the per-node size.
+			 */
+			while (end - physnodes[i].start -
+				e820_hole_size(physnodes[i].start, end) < size) {
+				end += FAKE_NODE_MIN_SIZE;
+				if (end > physnodes[i].end) {
+					end = physnodes[i].end;
+					break;
+				}
+			}
+
+			/*
+			 * If there won't be at least FAKE_NODE_MIN_SIZE of
+			 * non-reserved memory in ZONE_DMA32 for the next node,
+			 * this one must extend to the boundary.
+			 */
+			if (end < dma32_end && dma32_end - end -
+			    e820_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
+				end = dma32_end;
+
+			/*
+			 * If there won't be enough non-reserved memory for the
+			 * next node, this one must extend to the end of the
+			 * physical node.
+			 */
+			if (physnodes[i].end - end -
+			    e820_hole_size(end, physnodes[i].end) < size)
+				end = physnodes[i].end;
+
+			/*
+			 * Avoid allocating more nodes than requested, which can
+			 * happen as a result of rounding down each node's size
+			 * to FAKE_NODE_MIN_SIZE.
+			 */
+			if (nodes_weight(physnode_mask) + ret >= nr_nodes)
+				end = physnodes[i].end;
+
+			if (setup_node_range(ret++, &physnodes[i].start,
+						end - physnodes[i].start,
+						physnodes[i].end) < 0)
+				node_clear(i, physnode_mask);
+		}
+	}
+	return ret;
+}
+
+/*
  * Splits num_nodes nodes up equally starting at node_start.  The return value
  * is the number of nodes split up and addr is adjusted to be at the end of the
  * last node allocated.
  */
-static int __init split_nodes_equally(struct bootnode *nodes, u64 *addr,
-				      u64 max_addr, int node_start,
+static int __init split_nodes_equally(u64 *addr, u64 max_addr, int node_start,
 				      int num_nodes)
 {
 	unsigned int big;
@@ -388,7 +554,7 @@ static int __init split_nodes_equally(struct bootnode *nodes, u64 *addr,
 					break;
 				}
 			}
-		if (setup_node_range(i, nodes, addr, end - *addr, max_addr) < 0)
+		if (setup_node_range(i, addr, end - *addr, max_addr) < 0)
 			break;
 	}
 	return i - node_start + 1;
@@ -399,12 +565,12 @@ static int __init split_nodes_equally(struct bootnode *nodes, u64 *addr,
  * always assigned to a final node and can be asymmetric.  Returns the number of
  * nodes split.
  */
-static int __init split_nodes_by_size(struct bootnode *nodes, u64 *addr,
-				      u64 max_addr, int node_start, u64 size)
+static int __init split_nodes_by_size(u64 *addr, u64 max_addr, int node_start,
+				      u64 size)
 {
 	int i = node_start;
 	size = (size << 20) & FAKE_NODE_MIN_HASH_MASK;
-	while (!setup_node_range(i++, nodes, addr, size, max_addr))
+	while (!setup_node_range(i++, addr, size, max_addr))
 		;
 	return i - node_start;
 }
@@ -413,15 +579,15 @@ static int __init split_nodes_by_size(struct bootnode *nodes, u64 *addr,
  * Sets up the system RAM area from start_pfn to last_pfn according to the
  * numa=fake command-line option.
  */
-static struct bootnode nodes[MAX_NUMNODES] __initdata;
-
-static int __init numa_emulation(unsigned long start_pfn, unsigned long last_pfn)
+static int __init numa_emulation(unsigned long start_pfn,
+			unsigned long last_pfn, int acpi, int k8)
 {
 	u64 size, addr = start_pfn << PAGE_SHIFT;
 	u64 max_addr = last_pfn << PAGE_SHIFT;
 	int num_nodes = 0, num = 0, coeff_flag, coeff = -1, i;
+	int num_phys_nodes;
 
-	memset(&nodes, 0, sizeof(nodes));
+	num_phys_nodes = setup_physnodes(addr, max_addr, acpi, k8);
 	/*
 	 * If the numa=fake command-line is just a single number N, split the
 	 * system RAM into N fake nodes.
@@ -429,7 +595,8 @@ static int __init numa_emulation(unsigned long start_pfn, unsigned long last_pfn
 	if (!strchr(cmdline, '*') && !strchr(cmdline, ',')) {
 		long n = simple_strtol(cmdline, NULL, 0);
 
-		num_nodes = split_nodes_equally(nodes, &addr, max_addr, 0, n);
+		num_nodes = split_nodes_interleave(addr, max_addr,
+							num_phys_nodes, n);
 		if (num_nodes < 0)
 			return num_nodes;
 		goto out;
@@ -456,8 +623,8 @@ static int __init numa_emulation(unsigned long start_pfn, unsigned long last_pfn
 			size = ((u64)num << 20) & FAKE_NODE_MIN_HASH_MASK;
 			if (size)
 				for (i = 0; i < coeff; i++, num_nodes++)
-					if (setup_node_range(num_nodes, nodes,
-						&addr, size, max_addr) < 0)
+					if (setup_node_range(num_nodes, &addr,
+						size, max_addr) < 0)
 						goto done;
 			if (!*cmdline)
 				break;
@@ -473,7 +640,7 @@ done:
 	if (addr < max_addr) {
 		if (coeff_flag && coeff < 0) {
 			/* Split remaining nodes into num-sized chunks */
-			num_nodes += split_nodes_by_size(nodes, &addr, max_addr,
+			num_nodes += split_nodes_by_size(&addr, max_addr,
 							 num_nodes, num);
 			goto out;
 		}
@@ -482,7 +649,7 @@ done:
 			/* Split remaining nodes into coeff chunks */
 			if (coeff <= 0)
 				break;
-			num_nodes += split_nodes_equally(nodes, &addr, max_addr,
+			num_nodes += split_nodes_equally(&addr, max_addr,
 							 num_nodes, coeff);
 			break;
 		case ',':
@@ -490,8 +657,8 @@ done:
 			break;
 		default:
 			/* Give one final node */
-			setup_node_range(num_nodes, nodes, &addr,
-					 max_addr - addr, max_addr);
+			setup_node_range(num_nodes, &addr, max_addr - addr,
+					 max_addr);
 			num_nodes++;
 		}
 	}
@@ -505,14 +672,10 @@ out:
 	}
 
 	/*
-	 * We need to vacate all active ranges that may have been registered by
-	 * SRAT and set acpi_numa to -1 so that srat_disabled() always returns
-	 * true.  NUMA emulation has succeeded so we will not scan ACPI nodes.
+	 * We need to vacate all active ranges that may have been registered for
+	 * the e820 memory map.
 	 */
 	remove_all_active_ranges();
-#ifdef CONFIG_ACPI_NUMA
-	acpi_numa = -1;
-#endif
 	for_each_node_mask(i, node_possible_map) {
 		e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
 						nodes[i].end >> PAGE_SHIFT);
@@ -524,7 +687,8 @@ out:
 }
 #endif /* CONFIG_NUMA_EMU */
 
-void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn)
+void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn,
+				int acpi, int k8)
 {
 	int i;
 
@@ -532,23 +696,22 @@ void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn)
 	nodes_clear(node_online_map);
 
 #ifdef CONFIG_NUMA_EMU
-	if (cmdline && !numa_emulation(start_pfn, last_pfn))
+	if (cmdline && !numa_emulation(start_pfn, last_pfn, acpi, k8))
 		return;
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
 #endif
 
 #ifdef CONFIG_ACPI_NUMA
-	if (!numa_off && !acpi_scan_nodes(start_pfn << PAGE_SHIFT,
-					  last_pfn << PAGE_SHIFT))
+	if (!numa_off && acpi && !acpi_scan_nodes(start_pfn << PAGE_SHIFT,
+						  last_pfn << PAGE_SHIFT))
 		return;
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
 #endif
 
 #ifdef CONFIG_K8_NUMA
-	if (!numa_off && !k8_scan_nodes(start_pfn<<PAGE_SHIFT,
-					last_pfn<<PAGE_SHIFT))
+	if (!numa_off && k8 && !k8_scan_nodes())
 		return;
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
@@ -601,6 +764,25 @@ static __init int numa_setup(char *opt)
 early_param("numa", numa_setup);
 
 #ifdef CONFIG_NUMA
+
+static __init int find_near_online_node(int node)
+{
+	int n, val;
+	int min_val = INT_MAX;
+	int best_node = -1;
+
+	for_each_online_node(n) {
+		val = node_distance(node, n);
+
+		if (val < min_val) {
+			min_val = val;
+			best_node = n;
+		}
+	}
+
+	return best_node;
+}
+
 /*
  * Setup early cpu_to_node.
  *
@@ -632,7 +814,7 @@ void __init init_cpu_to_node(void)
 		if (node == NUMA_NO_NODE)
 			continue;
 		if (!node_online(node))
-			continue;
+			node = find_near_online_node(node);
 		numa_set_node(cpu, node);
 	}
 }
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index dd38bfbefd1f..1d4eb93d333c 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -279,6 +279,22 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address,
 		   __pa((unsigned long)__end_rodata) >> PAGE_SHIFT))
 		pgprot_val(forbidden) |= _PAGE_RW;
 
+#if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
+	/*
+	 * Once the kernel maps the text as RO (kernel_set_to_readonly is set),
+	 * kernel text mappings for the large page aligned text, rodata sections
+	 * will be always read-only. For the kernel identity mappings covering
+	 * the holes caused by this alignment can be anything that user asks.
+	 *
+	 * This will preserve the large page mappings for kernel text/data
+	 * at no extra cost.
+	 */
+	if (kernel_set_to_readonly &&
+	    within(address, (unsigned long)_text,
+		   (unsigned long)__end_rodata_hpage_align))
+		pgprot_val(forbidden) |= _PAGE_RW;
+#endif
+
 	prot = __pgprot(pgprot_val(prot) & ~pgprot_val(forbidden));
 
 	return prot;
@@ -1069,12 +1085,18 @@ EXPORT_SYMBOL(set_memory_array_wb);
 
 int set_memory_x(unsigned long addr, int numpages)
 {
+	if (!(__supported_pte_mask & _PAGE_NX))
+		return 0;
+
 	return change_page_attr_clear(&addr, numpages, __pgprot(_PAGE_NX), 0);
 }
 EXPORT_SYMBOL(set_memory_x);
 
 int set_memory_nx(unsigned long addr, int numpages)
 {
+	if (!(__supported_pte_mask & _PAGE_NX))
+		return 0;
+
 	return change_page_attr_set(&addr, numpages, __pgprot(_PAGE_NX), 0);
 }
 EXPORT_SYMBOL(set_memory_nx);
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index e78cd0ec2bcf..ae9648eb1c7f 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -20,6 +20,7 @@
 #include <asm/cacheflush.h>
 #include <asm/processor.h>
 #include <asm/tlbflush.h>
+#include <asm/x86_init.h>
 #include <asm/pgtable.h>
 #include <asm/fcntl.h>
 #include <asm/e820.h>
@@ -355,9 +356,6 @@ static int free_ram_pages_type(u64 start, u64 end)
  * - _PAGE_CACHE_UC_MINUS
  * - _PAGE_CACHE_UC
  *
- * req_type will have a special case value '-1', when requester want to inherit
- * the memory type from mtrr (if WB), existing PAT, defaulting to UC_MINUS.
- *
  * If new_type is NULL, function will return an error if it cannot reserve the
  * region with req_type. If new_type is non-NULL, function will return
  * available type in new_type in case of no error. In case of any error
@@ -377,9 +375,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 	if (!pat_enabled) {
 		/* This is identical to page table setting without PAT */
 		if (new_type) {
-			if (req_type == -1)
-				*new_type = _PAGE_CACHE_WB;
-			else if (req_type == _PAGE_CACHE_WC)
+			if (req_type == _PAGE_CACHE_WC)
 				*new_type = _PAGE_CACHE_UC_MINUS;
 			else
 				*new_type = req_type & _PAGE_CACHE_MASK;
@@ -388,7 +384,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 	}
 
 	/* Low ISA region is always mapped WB in page table. No need to track */
-	if (is_ISA_range(start, end - 1)) {
+	if (x86_platform.is_untracked_pat_range(start, end)) {
 		if (new_type)
 			*new_type = _PAGE_CACHE_WB;
 		return 0;
@@ -499,7 +495,7 @@ int free_memtype(u64 start, u64 end)
 		return 0;
 
 	/* Low ISA region is always mapped WB. No need to track */
-	if (is_ISA_range(start, end - 1))
+	if (x86_platform.is_untracked_pat_range(start, end))
 		return 0;
 
 	is_range_ram = pat_pagerange_is_ram(start, end);
@@ -582,7 +578,7 @@ static unsigned long lookup_memtype(u64 paddr)
 	int rettype = _PAGE_CACHE_WB;
 	struct memtype *entry;
 
-	if (is_ISA_range(paddr, paddr + PAGE_SIZE - 1))
+	if (x86_platform.is_untracked_pat_range(paddr, paddr + PAGE_SIZE))
 		return rettype;
 
 	if (pat_pagerange_is_ram(paddr, paddr + PAGE_SIZE)) {
@@ -708,9 +704,8 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 	if (!range_is_allowed(pfn, size))
 		return 0;
 
-	if (file->f_flags & O_SYNC) {
+	if (file->f_flags & O_DSYNC)
 		flags = _PAGE_CACHE_UC_MINUS;
-	}
 
 #ifdef CONFIG_X86_32
 	/*
@@ -1018,8 +1013,10 @@ static const struct file_operations memtype_fops = {
 
 static int __init pat_memtype_list_init(void)
 {
-	debugfs_create_file("pat_memtype_list", S_IRUSR, arch_debugfs_dir,
-				NULL, &memtype_fops);
+	if (pat_enabled) {
+		debugfs_create_file("pat_memtype_list", S_IRUSR,
+				    arch_debugfs_dir, NULL, &memtype_fops);
+	}
 	return 0;
 }
 
diff --git a/arch/x86/mm/setup_nx.c b/arch/x86/mm/setup_nx.c
index 513d8ed5d2ec..a3250aa34086 100644
--- a/arch/x86/mm/setup_nx.c
+++ b/arch/x86/mm/setup_nx.c
@@ -3,10 +3,8 @@
 #include <linux/init.h>
 
 #include <asm/pgtable.h>
+#include <asm/proto.h>
 
-int nx_enabled;
-
-#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 static int disable_nx __cpuinitdata;
 
 /*
@@ -22,48 +20,41 @@ static int __init noexec_setup(char *str)
 	if (!str)
 		return -EINVAL;
 	if (!strncmp(str, "on", 2)) {
-		__supported_pte_mask |= _PAGE_NX;
 		disable_nx = 0;
 	} else if (!strncmp(str, "off", 3)) {
 		disable_nx = 1;
-		__supported_pte_mask &= ~_PAGE_NX;
 	}
+	x86_configure_nx();
 	return 0;
 }
 early_param("noexec", noexec_setup);
-#endif
 
-#ifdef CONFIG_X86_PAE
-void __init set_nx(void)
+void __cpuinit x86_configure_nx(void)
 {
-	unsigned int v[4], l, h;
-
-	if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
-		cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
+	if (cpu_has_nx && !disable_nx)
+		__supported_pte_mask |= _PAGE_NX;
+	else
+		__supported_pte_mask &= ~_PAGE_NX;
+}
 
-		if ((v[3] & (1 << 20)) && !disable_nx) {
-			rdmsr(MSR_EFER, l, h);
-			l |= EFER_NX;
-			wrmsr(MSR_EFER, l, h);
-			nx_enabled = 1;
-			__supported_pte_mask |= _PAGE_NX;
+void __init x86_report_nx(void)
+{
+	if (!cpu_has_nx) {
+		printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
+		       "missing in CPU or disabled in BIOS!\n");
+	} else {
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+		if (disable_nx) {
+			printk(KERN_INFO "NX (Execute Disable) protection: "
+			       "disabled by kernel command line option\n");
+		} else {
+			printk(KERN_INFO "NX (Execute Disable) protection: "
+			       "active\n");
 		}
-	}
-}
 #else
-void set_nx(void)
-{
-}
+		/* 32bit non-PAE kernel, NX cannot be used */
+		printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
+		       "cannot be enabled: non-PAE kernel!\n");
 #endif
-
-#ifdef CONFIG_X86_64
-void __cpuinit check_efer(void)
-{
-	unsigned long efer;
-
-	rdmsrl(MSR_EFER, efer);
-	if (!(efer & EFER_NX) || disable_nx)
-		__supported_pte_mask &= ~_PAGE_NX;
+	}
 }
-#endif
-
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index dbb5381f7b3b..d89075489664 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -136,7 +136,7 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
 	apicid_to_node[apic_id] = node;
 	node_set(node, cpu_nodes_parsed);
 	acpi_numa = 1;
-	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
+	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n",
 	       pxm, apic_id, node);
 }
 
@@ -170,7 +170,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 	apicid_to_node[apic_id] = node;
 	node_set(node, cpu_nodes_parsed);
 	acpi_numa = 1;
-	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
+	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n",
 	       pxm, apic_id, node);
 }
 
@@ -290,8 +290,6 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 
 	printk(KERN_INFO "SRAT: Node %u PXM %u %lx-%lx\n", node, pxm,
 	       start, end);
-	e820_register_active_regions(node, start >> PAGE_SHIFT,
-				     end >> PAGE_SHIFT);
 
 	if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) {
 		update_nodes_add(node, start, end);
@@ -338,6 +336,19 @@ static int __init nodes_cover_memory(const struct bootnode *nodes)
 
 void __init acpi_numa_arch_fixup(void) {}
 
+int __init acpi_get_nodes(struct bootnode *physnodes)
+{
+	int i;
+	int ret = 0;
+
+	for_each_node_mask(i, nodes_parsed) {
+		physnodes[ret].start = nodes[i].start;
+		physnodes[ret].end = nodes[i].end;
+		ret++;
+	}
+	return ret;
+}
+
 /* Use the information discovered above to actually set up the nodes. */
 int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 {
@@ -350,11 +361,6 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 	for (i = 0; i < MAX_NUMNODES; i++)
 		cutoff_node(i, start, end);
 
-	if (!nodes_cover_memory(nodes)) {
-		bad_srat();
-		return -1;
-	}
-
 	memnode_shift = compute_hash_shift(node_memblk_range, num_node_memblks,
 					   memblk_nodeid);
 	if (memnode_shift < 0) {
@@ -364,6 +370,14 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 		return -1;
 	}
 
+	for_each_node_mask(i, nodes_parsed)
+		e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
+						nodes[i].end >> PAGE_SHIFT);
+	if (!nodes_cover_memory(nodes)) {
+		bad_srat();
+		return -1;
+	}
+
 	/* Account for nodes with cpus and no memory */
 	nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed);
 
@@ -454,7 +468,6 @@ void __init acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes)
 	for (i = 0; i < num_nodes; i++)
 		if (fake_nodes[i].start != fake_nodes[i].end)
 			node_set(i, nodes_parsed);
-	WARN_ON(!nodes_cover_memory(fake_nodes));
 }
 
 static int null_slit_node_compare(int a, int b)
diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c
index 427fd1b56df5..8565d944f7cf 100644
--- a/arch/x86/mm/testmmiotrace.c
+++ b/arch/x86/mm/testmmiotrace.c
@@ -1,12 +1,13 @@
 /*
  * Written by Pekka Paalanen, 2008-2009 <pq@iki.fi>
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mmiotrace.h>
 
-#define MODULE_NAME "testmmiotrace"
-
 static unsigned long mmio_address;
 module_param(mmio_address, ulong, 0);
 MODULE_PARM_DESC(mmio_address, " Start address of the mapping of 16 kB "
@@ -30,7 +31,7 @@ static unsigned v32(unsigned i)
 static void do_write_test(void __iomem *p)
 {
 	unsigned int i;
-	pr_info(MODULE_NAME ": write test.\n");
+	pr_info("write test.\n");
 	mmiotrace_printk("Write test.\n");
 
 	for (i = 0; i < 256; i++)
@@ -47,7 +48,7 @@ static void do_read_test(void __iomem *p)
 {
 	unsigned int i;
 	unsigned errs[3] = { 0 };
-	pr_info(MODULE_NAME ": read test.\n");
+	pr_info("read test.\n");
 	mmiotrace_printk("Read test.\n");
 
 	for (i = 0; i < 256; i++)
@@ -68,7 +69,7 @@ static void do_read_test(void __iomem *p)
 
 static void do_read_far_test(void __iomem *p)
 {
-	pr_info(MODULE_NAME ": read far test.\n");
+	pr_info("read far test.\n");
 	mmiotrace_printk("Read far test.\n");
 
 	ioread32(p + read_far);
@@ -78,7 +79,7 @@ static void do_test(unsigned long size)
 {
 	void __iomem *p = ioremap_nocache(mmio_address, size);
 	if (!p) {
-		pr_err(MODULE_NAME ": could not ioremap, aborting.\n");
+		pr_err("could not ioremap, aborting.\n");
 		return;
 	}
 	mmiotrace_printk("ioremap returned %p.\n", p);
@@ -94,24 +95,22 @@ static int __init init(void)
 	unsigned long size = (read_far) ? (8 << 20) : (16 << 10);
 
 	if (mmio_address == 0) {
-		pr_err(MODULE_NAME ": you have to use the module argument "
-							"mmio_address.\n");
-		pr_err(MODULE_NAME ": DO NOT LOAD THIS MODULE UNLESS"
-				" YOU REALLY KNOW WHAT YOU ARE DOING!\n");
+		pr_err("you have to use the module argument mmio_address.\n");
+		pr_err("DO NOT LOAD THIS MODULE UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!\n");
 		return -ENXIO;
 	}
 
-	pr_warning(MODULE_NAME ": WARNING: mapping %lu kB @ 0x%08lx in PCI "
-		"address space, and writing 16 kB of rubbish in there.\n",
-		 size >> 10, mmio_address);
+	pr_warning("WARNING: mapping %lu kB @ 0x%08lx in PCI address space, "
+		   "and writing 16 kB of rubbish in there.\n",
+		   size >> 10, mmio_address);
 	do_test(size);
-	pr_info(MODULE_NAME ": All done.\n");
+	pr_info("All done.\n");
 	return 0;
 }
 
 static void __exit cleanup(void)
 {
-	pr_debug(MODULE_NAME ": unloaded.\n");
+	pr_debug("unloaded.\n");
 }
 
 module_init(init);
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 36fe08eeb5c3..65b58e4b0b8b 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -8,6 +8,7 @@
 
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
+#include <asm/cache.h>
 #include <asm/apic.h>
 #include <asm/uv/uv.h>
 
@@ -43,7 +44,7 @@ union smp_flush_state {
 		spinlock_t tlbstate_lock;
 		DECLARE_BITMAP(flush_cpumask, NR_CPUS);
 	};
-	char pad[CONFIG_X86_INTERNODE_CACHE_BYTES];
+	char pad[INTERNODE_CACHE_BYTES];
 } ____cacheline_internodealigned_in_smp;
 
 /* State is put into the per CPU data section, but padded
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index d49202e740ea..564b008a51c7 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -15,3 +15,8 @@ obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 
 obj-y				+= common.o early.o
 obj-y				+= amd_bus.o
+obj-$(CONFIG_X86_64)		+= bus_numa.o intel_bus.o
+
+ifeq ($(CONFIG_PCI_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 1014eb4bfc37..959e548a7039 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -7,6 +7,7 @@
 #include <asm/pci_x86.h>
 
 struct pci_root_info {
+	struct acpi_device *bridge;
 	char *name;
 	unsigned int res_num;
 	struct resource *res;
@@ -58,6 +59,30 @@ bus_has_transparent_bridge(struct pci_bus *bus)
 	return false;
 }
 
+static void
+align_resource(struct acpi_device *bridge, struct resource *res)
+{
+	int align = (res->flags & IORESOURCE_MEM) ? 16 : 4;
+
+	/*
+	 * Host bridge windows are not BARs, but the decoders on the PCI side
+	 * that claim this address space have starting alignment and length
+	 * constraints, so fix any obvious BIOS goofs.
+	 */
+	if (!IS_ALIGNED(res->start, align)) {
+		dev_printk(KERN_DEBUG, &bridge->dev,
+			   "host bridge window %pR invalid; "
+			   "aligning start to %d-byte boundary\n", res, align);
+		res->start &= ~(align - 1);
+	}
+	if (!IS_ALIGNED(res->end + 1, align)) {
+		dev_printk(KERN_DEBUG, &bridge->dev,
+			   "host bridge window %pR invalid; "
+			   "aligning end to %d-byte boundary\n", res, align);
+		res->end = ALIGN(res->end, align) - 1;
+	}
+}
+
 static acpi_status
 setup_resource(struct acpi_resource *acpi_res, void *data)
 {
@@ -91,11 +116,12 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	start = addr.minimum + addr.translation_offset;
 	end = start + addr.address_length - 1;
 	if (info->res_num >= max_root_bus_resources) {
-		printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx "
-			"from %s for %s due to _CRS returning more than "
-			"%d resource descriptors\n", (unsigned long) start,
-			(unsigned long) end, root->name, info->name,
-			max_root_bus_resources);
+		if (pci_probe & PCI_USE__CRS)
+			printk(KERN_WARNING "PCI: Failed to allocate "
+			       "0x%lx-0x%lx from %s for %s due to _CRS "
+			       "returning more than %d resource descriptors\n",
+			       (unsigned long) start, (unsigned long) end,
+			       root->name, info->name, max_root_bus_resources);
 		return AE_OK;
 	}
 
@@ -105,14 +131,28 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	res->start = start;
 	res->end = end;
 	res->child = NULL;
+	align_resource(info->bridge, res);
+
+	if (!(pci_probe & PCI_USE__CRS)) {
+		dev_printk(KERN_DEBUG, &info->bridge->dev,
+			   "host bridge window %pR (ignored)\n", res);
+		return AE_OK;
+	}
 
 	if (insert_resource(root, res)) {
-		printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx "
-			"from %s for %s\n", (unsigned long) res->start,
-			(unsigned long) res->end, root->name, info->name);
+		dev_err(&info->bridge->dev,
+			"can't allocate host bridge window %pR\n", res);
 	} else {
 		info->bus->resource[info->res_num] = res;
 		info->res_num++;
+		if (addr.translation_offset)
+			dev_info(&info->bridge->dev, "host bridge window %pR "
+				 "(PCI address [%#llx-%#llx])\n",
+				 res, res->start - addr.translation_offset,
+				 res->end - addr.translation_offset);
+		else
+			dev_info(&info->bridge->dev,
+				 "host bridge window %pR\n", res);
 	}
 	return AE_OK;
 }
@@ -124,6 +164,12 @@ get_current_resources(struct acpi_device *device, int busnum,
 	struct pci_root_info info;
 	size_t size;
 
+	if (!(pci_probe & PCI_USE__CRS))
+		dev_info(&device->dev,
+			 "ignoring host bridge windows from ACPI; "
+			 "boot with \"pci=use_crs\" to use them\n");
+
+	info.bridge = device;
 	info.bus = bus;
 	info.res_num = 0;
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_resource,
@@ -163,8 +209,9 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 #endif
 
 	if (domain && !pci_domains_supported) {
-		printk(KERN_WARNING "PCI: Multiple domains not supported "
-		       "(dom %d, bus %d)\n", domain, busnum);
+		printk(KERN_WARNING "pci_bus %04x:%02x: "
+		       "ignored (multiple domains not supported)\n",
+		       domain, busnum);
 		return NULL;
 	}
 
@@ -188,7 +235,8 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 	 */
 	sd = kzalloc(sizeof(*sd), GFP_KERNEL);
 	if (!sd) {
-		printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum);
+		printk(KERN_WARNING "pci_bus %04x:%02x: "
+		       "ignored (out of memory)\n", domain, busnum);
 		return NULL;
 	}
 
@@ -209,9 +257,7 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 	} else {
 		bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd);
 		if (bus) {
-			if (pci_probe & PCI_USE__CRS)
-				get_current_resources(device, busnum, domain,
-							bus);
+			get_current_resources(device, busnum, domain, bus);
 			bus->subordinate = pci_scan_child_bus(bus);
 		}
 	}
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 572ee9782f2a..95ecbd495955 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -6,10 +6,10 @@
 
 #ifdef CONFIG_X86_64
 #include <asm/pci-direct.h>
-#include <asm/mpspec.h>
-#include <linux/cpumask.h>
 #endif
 
+#include "bus_numa.h"
+
 /*
  * This discovers the pcibus <-> node mapping on AMD K8.
  * also get peer root bus resource for io,mmio
@@ -17,67 +17,6 @@
 
 #ifdef CONFIG_X86_64
 
-/*
- * sub bus (transparent) will use entres from 3 to store extra from root,
- * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES?
- */
-#define RES_NUM 16
-struct pci_root_info {
-	char name[12];
-	unsigned int res_num;
-	struct resource res[RES_NUM];
-	int bus_min;
-	int bus_max;
-	int node;
-	int link;
-};
-
-/* 4 at this time, it may become to 32 */
-#define PCI_ROOT_NR 4
-static int pci_root_num;
-static struct pci_root_info pci_root_info[PCI_ROOT_NR];
-
-void x86_pci_root_bus_res_quirks(struct pci_bus *b)
-{
-	int i;
-	int j;
-	struct pci_root_info *info;
-
-	/* don't go for it if _CRS is used already */
-	if (b->resource[0] != &ioport_resource ||
-	    b->resource[1] != &iomem_resource)
-		return;
-
-	/* if only one root bus, don't need to anything */
-	if (pci_root_num < 2)
-		return;
-
-	for (i = 0; i < pci_root_num; i++) {
-		if (pci_root_info[i].bus_min == b->number)
-			break;
-	}
-
-	if (i == pci_root_num)
-		return;
-
-	printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
-			b->number);
-
-	info = &pci_root_info[i];
-	for (j = 0; j < info->res_num; j++) {
-		struct resource *res;
-		struct resource *root;
-
-		res = &info->res[j];
-		b->resource[j] = res;
-		if (res->flags & IORESOURCE_IO)
-			root = &ioport_resource;
-		else
-			root = &iomem_resource;
-		insert_resource(root, res);
-	}
-}
-
 #define RANGE_NUM 16
 
 struct res_range {
@@ -130,52 +69,6 @@ static void __init update_range(struct res_range *range, size_t start,
 	}
 }
 
-static void __init update_res(struct pci_root_info *info, size_t start,
-			      size_t end, unsigned long flags, int merge)
-{
-	int i;
-	struct resource *res;
-
-	if (!merge)
-		goto addit;
-
-	/* try to merge it with old one */
-	for (i = 0; i < info->res_num; i++) {
-		size_t final_start, final_end;
-		size_t common_start, common_end;
-
-		res = &info->res[i];
-		if (res->flags != flags)
-			continue;
-
-		common_start = max((size_t)res->start, start);
-		common_end = min((size_t)res->end, end);
-		if (common_start > common_end + 1)
-			continue;
-
-		final_start = min((size_t)res->start, start);
-		final_end = max((size_t)res->end, end);
-
-		res->start = final_start;
-		res->end = final_end;
-		return;
-	}
-
-addit:
-
-	/* need to add that */
-	if (info->res_num >= RES_NUM)
-		return;
-
-	res = &info->res[info->res_num];
-	res->name = info->name;
-	res->flags = flags;
-	res->start = start;
-	res->end = end;
-	res->child = NULL;
-	info->res_num++;
-}
-
 struct pci_hostbridge_probe {
 	u32 bus;
 	u32 slot;
@@ -230,7 +123,6 @@ static int __init early_fill_mp_bus_info(void)
 	int j;
 	unsigned bus;
 	unsigned slot;
-	int found;
 	int node;
 	int link;
 	int def_node;
@@ -247,7 +139,7 @@ static int __init early_fill_mp_bus_info(void)
 	if (!early_pci_allowed())
 		return -1;
 
-	found = 0;
+	found_all_numa_early = 0;
 	for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
 		u32 id;
 		u16 device;
@@ -261,12 +153,12 @@ static int __init early_fill_mp_bus_info(void)
 		device = (id>>16) & 0xffff;
 		if (pci_probes[i].vendor == vendor &&
 		    pci_probes[i].device == device) {
-			found = 1;
+			found_all_numa_early = 1;
 			break;
 		}
 	}
 
-	if (!found)
+	if (!found_all_numa_early)
 		return 0;
 
 	pci_root_num = 0;
@@ -488,7 +380,7 @@ static int __init early_fill_mp_bus_info(void)
 		info = &pci_root_info[i];
 		res_num = info->res_num;
 		busnum = info->bus_min;
-		printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n",
+		printk(KERN_DEBUG "bus: [%02x, %02x] on node %x link %x\n",
 		       info->bus_min, info->bus_max, info->node, info->link);
 		for (j = 0; j < res_num; j++) {
 			res = &info->res[j];
diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c
new file mode 100644
index 000000000000..145df00e0387
--- /dev/null
+++ b/arch/x86/pci/bus_numa.c
@@ -0,0 +1,101 @@
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include "bus_numa.h"
+
+int pci_root_num;
+struct pci_root_info pci_root_info[PCI_ROOT_NR];
+int found_all_numa_early;
+
+void x86_pci_root_bus_res_quirks(struct pci_bus *b)
+{
+	int i;
+	int j;
+	struct pci_root_info *info;
+
+	/* don't go for it if _CRS is used already */
+	if (b->resource[0] != &ioport_resource ||
+	    b->resource[1] != &iomem_resource)
+		return;
+
+	if (!pci_root_num)
+		return;
+
+	/* for amd, if only one root bus, don't need to do anything */
+	if (pci_root_num < 2 && found_all_numa_early)
+		return;
+
+	for (i = 0; i < pci_root_num; i++) {
+		if (pci_root_info[i].bus_min == b->number)
+			break;
+	}
+
+	if (i == pci_root_num)
+		return;
+
+	printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
+			b->number);
+
+	info = &pci_root_info[i];
+	for (j = 0; j < info->res_num; j++) {
+		struct resource *res;
+		struct resource *root;
+
+		res = &info->res[j];
+		b->resource[j] = res;
+		if (res->flags & IORESOURCE_IO)
+			root = &ioport_resource;
+		else
+			root = &iomem_resource;
+		insert_resource(root, res);
+	}
+}
+
+void __init update_res(struct pci_root_info *info, size_t start,
+			      size_t end, unsigned long flags, int merge)
+{
+	int i;
+	struct resource *res;
+
+	if (start > end)
+		return;
+
+	if (!merge)
+		goto addit;
+
+	/* try to merge it with old one */
+	for (i = 0; i < info->res_num; i++) {
+		size_t final_start, final_end;
+		size_t common_start, common_end;
+
+		res = &info->res[i];
+		if (res->flags != flags)
+			continue;
+
+		common_start = max((size_t)res->start, start);
+		common_end = min((size_t)res->end, end);
+		if (common_start > common_end + 1)
+			continue;
+
+		final_start = min((size_t)res->start, start);
+		final_end = max((size_t)res->end, end);
+
+		res->start = final_start;
+		res->end = final_end;
+		return;
+	}
+
+addit:
+
+	/* need to add that */
+	if (info->res_num >= RES_NUM)
+		return;
+
+	res = &info->res[info->res_num];
+	res->name = info->name;
+	res->flags = flags;
+	res->start = start;
+	res->end = end;
+	res->child = NULL;
+	info->res_num++;
+}
diff --git a/arch/x86/pci/bus_numa.h b/arch/x86/pci/bus_numa.h
new file mode 100644
index 000000000000..adbc23fe82ac
--- /dev/null
+++ b/arch/x86/pci/bus_numa.h
@@ -0,0 +1,27 @@
+#ifdef CONFIG_X86_64
+
+/*
+ * sub bus (transparent) will use entres from 3 to store extra from
+ * root, so need to make sure we have enough slot there, Should we
+ * increase PCI_BUS_NUM_RESOURCES?
+ */
+#define RES_NUM 16
+struct pci_root_info {
+	char name[12];
+	unsigned int res_num;
+	struct resource res[RES_NUM];
+	int bus_min;
+	int bus_max;
+	int node;
+	int link;
+};
+
+/* 4 at this time, it may become to 32 */
+#define PCI_ROOT_NR 4
+extern int pci_root_num;
+extern struct pci_root_info pci_root_info[PCI_ROOT_NR];
+extern int found_all_numa_early;
+
+extern void update_res(struct pci_root_info *info, size_t start,
+			      size_t end, unsigned long flags, int merge);
+#endif
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 1331fcf26143..d2552c68e94d 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -410,8 +410,6 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum)
 	return bus;
 }
 
-extern u8 pci_cache_line_size;
-
 int __init pcibios_init(void)
 {
 	struct cpuinfo_x86 *c = &boot_cpu_data;
@@ -422,15 +420,19 @@ int __init pcibios_init(void)
 	}
 
 	/*
-	 * Assume PCI cacheline size of 32 bytes for all x86s except K7/K8
-	 * and P4. It's also good for 386/486s (which actually have 16)
+	 * Set PCI cacheline size to that of the CPU if the CPU has reported it.
+	 * (For older CPUs that don't support cpuid, we se it to 32 bytes
+	 * It's also good for 386/486s (which actually have 16)
 	 * as quite a few PCI devices do not support smaller values.
 	 */
-	pci_cache_line_size = 32 >> 2;
-	if (c->x86 >= 6 && c->x86_vendor == X86_VENDOR_AMD)
-		pci_cache_line_size = 64 >> 2;	/* K7 & K8 */
-	else if (c->x86 > 6 && c->x86_vendor == X86_VENDOR_INTEL)
-		pci_cache_line_size = 128 >> 2;	/* P4 */
+	if (c->x86_clflush_size > 0) {
+		pci_dfl_cache_line_size = c->x86_clflush_size >> 2;
+		printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n",
+			pci_dfl_cache_line_size << 2);
+	} else {
+ 		pci_dfl_cache_line_size = 32 >> 2;
+		printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n");
+	}
 
 	pcibios_resource_survey();
 
diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c
index aaf26ae58cd5..d1067d539bee 100644
--- a/arch/x86/pci/early.c
+++ b/arch/x86/pci/early.c
@@ -12,8 +12,6 @@ u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset)
 	u32 v;
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	v = inl(0xcfc);
-	if (v != 0xffffffff)
-		pr_debug("%x reading 4 from %x: %x\n", slot, offset, v);
 	return v;
 }
 
@@ -22,7 +20,6 @@ u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset)
 	u8 v;
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	v = inb(0xcfc + (offset&3));
-	pr_debug("%x reading 1 from %x: %x\n", slot, offset, v);
 	return v;
 }
 
@@ -31,28 +28,24 @@ u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset)
 	u16 v;
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	v = inw(0xcfc + (offset&2));
-	pr_debug("%x reading 2 from %x: %x\n", slot, offset, v);
 	return v;
 }
 
 void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset,
 				    u32 val)
 {
-	pr_debug("%x writing to %x: %x\n", slot, offset, val);
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	outl(val, 0xcfc);
 }
 
 void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val)
 {
-	pr_debug("%x writing to %x: %x\n", slot, offset, val);
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	outb(val, 0xcfc + (offset&3));
 }
 
 void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val)
 {
-	pr_debug("%x writing to %x: %x\n", slot, offset, val);
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	outw(val, 0xcfc + (offset&2));
 }
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index b22d13b0c71d..5dc9e8c63fcd 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -129,7 +129,9 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 					continue;
 				if (!r->start ||
 				    pci_claim_resource(dev, idx) < 0) {
-					dev_info(&dev->dev, "BAR %d: can't allocate resource\n", idx);
+					dev_info(&dev->dev,
+						 "can't reserve window %pR\n",
+						 r);
 					/*
 					 * Something is wrong with the region.
 					 * Invalidate the resource to prevent
@@ -144,16 +146,29 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 	}
 }
 
+struct pci_check_idx_range {
+	int start;
+	int end;
+};
+
 static void __init pcibios_allocate_resources(int pass)
 {
 	struct pci_dev *dev = NULL;
-	int idx, disabled;
+	int idx, disabled, i;
 	u16 command;
 	struct resource *r;
 
+	struct pci_check_idx_range idx_range[] = {
+		{ PCI_STD_RESOURCES, PCI_STD_RESOURCE_END },
+#ifdef CONFIG_PCI_IOV
+		{ PCI_IOV_RESOURCES, PCI_IOV_RESOURCE_END },
+#endif
+	};
+
 	for_each_pci_dev(dev) {
 		pci_read_config_word(dev, PCI_COMMAND, &command);
-		for (idx = 0; idx < PCI_ROM_RESOURCE; idx++) {
+		for (i = 0; i < ARRAY_SIZE(idx_range); i++)
+		for (idx = idx_range[i].start; idx <= idx_range[i].end; idx++) {
 			r = &dev->resource[idx];
 			if (r->parent)		/* Already allocated */
 				continue;
@@ -164,12 +179,12 @@ static void __init pcibios_allocate_resources(int pass)
 			else
 				disabled = !(command & PCI_COMMAND_MEMORY);
 			if (pass == disabled) {
-				dev_dbg(&dev->dev, "resource %#08llx-%#08llx (f=%lx, d=%d, p=%d)\n",
-					(unsigned long long) r->start,
-					(unsigned long long) r->end,
-					r->flags, disabled, pass);
+				dev_dbg(&dev->dev,
+					"BAR %d: reserving %pr (d=%d, p=%d)\n",
+					idx, r, disabled, pass);
 				if (pci_claim_resource(dev, idx) < 0) {
-					dev_info(&dev->dev, "BAR %d: can't allocate resource\n", idx);
+					dev_info(&dev->dev,
+						 "can't reserve %pR\n", r);
 					/* We'll assign a new address later */
 					r->end -= r->start;
 					r->start = 0;
@@ -182,7 +197,7 @@ static void __init pcibios_allocate_resources(int pass)
 				/* Turn the ROM off, leave the resource region,
 				 * but keep it unregistered. */
 				u32 reg;
-				dev_dbg(&dev->dev, "disabling ROM\n");
+				dev_dbg(&dev->dev, "disabling ROM %pR\n", r);
 				r->flags &= ~IORESOURCE_ROM_ENABLE;
 				pci_read_config_dword(dev,
 						dev->rom_base_reg, &reg);
@@ -282,6 +297,15 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 		return -EINVAL;
 
 	prot = pgprot_val(vma->vm_page_prot);
+
+	/*
+ 	 * Return error if pat is not enabled and write_combine is requested.
+ 	 * Caller can followup with UC MINUS request and add a WC mtrr if there
+ 	 * is a free mtrr slot.
+ 	 */
+	if (!pat_enabled && write_combine)
+		return -EINVAL;
+
 	if (pat_enabled && write_combine)
 		prot |= _PAGE_CACHE_WC;
 	else if (pat_enabled || boot_cpu_data.x86 > 3)
diff --git a/arch/x86/pci/intel_bus.c b/arch/x86/pci/intel_bus.c
new file mode 100644
index 000000000000..b7a55dc55d13
--- /dev/null
+++ b/arch/x86/pci/intel_bus.c
@@ -0,0 +1,90 @@
+/*
+ * to read io range from IOH pci conf, need to do it after mmconfig is there
+ */
+
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <asm/pci_x86.h>
+
+#include "bus_numa.h"
+
+static inline void print_ioh_resources(struct pci_root_info *info)
+{
+	int res_num;
+	int busnum;
+	int i;
+
+	printk(KERN_DEBUG "IOH bus: [%02x, %02x]\n",
+			info->bus_min, info->bus_max);
+	res_num = info->res_num;
+	busnum = info->bus_min;
+	for (i = 0; i < res_num; i++) {
+		struct resource *res;
+
+		res = &info->res[i];
+		printk(KERN_DEBUG "IOH bus: %02x index %x %s: [%llx, %llx]\n",
+			busnum, i,
+			(res->flags & IORESOURCE_IO) ? "io port" :
+							"mmio",
+			res->start, res->end);
+	}
+}
+
+#define IOH_LIO			0x108
+#define IOH_LMMIOL		0x10c
+#define IOH_LMMIOH		0x110
+#define IOH_LMMIOH_BASEU	0x114
+#define IOH_LMMIOH_LIMITU	0x118
+#define IOH_LCFGBUS		0x11c
+
+static void __devinit pci_root_bus_res(struct pci_dev *dev)
+{
+	u16 word;
+	u32 dword;
+	struct pci_root_info *info;
+	u16 io_base, io_end;
+	u32 mmiol_base, mmiol_end;
+	u64 mmioh_base, mmioh_end;
+	int bus_base, bus_end;
+
+	if (pci_root_num >= PCI_ROOT_NR) {
+		printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n");
+		return;
+	}
+
+	info = &pci_root_info[pci_root_num];
+	pci_root_num++;
+
+	pci_read_config_word(dev, IOH_LCFGBUS, &word);
+	bus_base = (word & 0xff);
+	bus_end = (word & 0xff00) >> 8;
+	sprintf(info->name, "PCI Bus #%02x", bus_base);
+	info->bus_min = bus_base;
+	info->bus_max = bus_end;
+
+	pci_read_config_word(dev, IOH_LIO, &word);
+	io_base = (word & 0xf0) << (12 - 4);
+	io_end = (word & 0xf000) | 0xfff;
+	update_res(info, io_base, io_end, IORESOURCE_IO, 0);
+
+	pci_read_config_dword(dev, IOH_LMMIOL, &dword);
+	mmiol_base = (dword & 0xff00) << (24 - 8);
+	mmiol_end = (dword & 0xff000000) | 0xffffff;
+	update_res(info, mmiol_base, mmiol_end, IORESOURCE_MEM, 0);
+
+	pci_read_config_dword(dev, IOH_LMMIOH, &dword);
+	mmioh_base = ((u64)(dword & 0xfc00)) << (26 - 10);
+	mmioh_end = ((u64)(dword & 0xfc000000) | 0x3ffffff);
+	pci_read_config_dword(dev, IOH_LMMIOH_BASEU, &dword);
+	mmioh_base |= ((u64)(dword & 0x7ffff)) << 32;
+	pci_read_config_dword(dev, IOH_LMMIOH_LIMITU, &dword);
+	mmioh_end |= ((u64)(dword & 0x7ffff)) << 32;
+	update_res(info, mmioh_base, mmioh_end, IORESOURCE_MEM, 0);
+
+	print_ioh_resources(info);
+}
+
+/* intel IOH */
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, pci_root_bus_res);
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 602c172d3bd5..b19d1e54201e 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -15,48 +15,98 @@
 #include <linux/acpi.h>
 #include <linux/sfi_acpi.h>
 #include <linux/bitmap.h>
-#include <linux/sort.h>
+#include <linux/dmi.h>
 #include <asm/e820.h>
 #include <asm/pci_x86.h>
 #include <asm/acpi.h>
 
 #define PREFIX "PCI: "
 
-/* aperture is up to 256MB but BIOS may reserve less */
-#define MMCONFIG_APER_MIN	(2 * 1024*1024)
-#define MMCONFIG_APER_MAX	(256 * 1024*1024)
-
 /* Indicate if the mmcfg resources have been placed into the resource table. */
 static int __initdata pci_mmcfg_resources_inserted;
 
-static __init int extend_mmcfg(int num)
+LIST_HEAD(pci_mmcfg_list);
+
+static __init void pci_mmconfig_remove(struct pci_mmcfg_region *cfg)
 {
-	struct acpi_mcfg_allocation *new;
-	int new_num = pci_mmcfg_config_num + num;
+	if (cfg->res.parent)
+		release_resource(&cfg->res);
+	list_del(&cfg->list);
+	kfree(cfg);
+}
 
-	new = kzalloc(sizeof(pci_mmcfg_config[0]) * new_num, GFP_KERNEL);
-	if (!new)
-		return -1;
+static __init void free_all_mmcfg(void)
+{
+	struct pci_mmcfg_region *cfg, *tmp;
 
-	if (pci_mmcfg_config) {
-		memcpy(new, pci_mmcfg_config,
-			 sizeof(pci_mmcfg_config[0]) * new_num);
-		kfree(pci_mmcfg_config);
+	pci_mmcfg_arch_free();
+	list_for_each_entry_safe(cfg, tmp, &pci_mmcfg_list, list)
+		pci_mmconfig_remove(cfg);
+}
+
+static __init void list_add_sorted(struct pci_mmcfg_region *new)
+{
+	struct pci_mmcfg_region *cfg;
+
+	/* keep list sorted by segment and starting bus number */
+	list_for_each_entry(cfg, &pci_mmcfg_list, list) {
+		if (cfg->segment > new->segment ||
+		    (cfg->segment == new->segment &&
+		     cfg->start_bus >= new->start_bus)) {
+			list_add_tail(&new->list, &cfg->list);
+			return;
+		}
 	}
-	pci_mmcfg_config = new;
+	list_add_tail(&new->list, &pci_mmcfg_list);
+}
 
-	return 0;
+static __init struct pci_mmcfg_region *pci_mmconfig_add(int segment, int start,
+							int end, u64 addr)
+{
+	struct pci_mmcfg_region *new;
+	int num_buses;
+	struct resource *res;
+
+	if (addr == 0)
+		return NULL;
+
+	new = kzalloc(sizeof(*new), GFP_KERNEL);
+	if (!new)
+		return NULL;
+
+	new->address = addr;
+	new->segment = segment;
+	new->start_bus = start;
+	new->end_bus = end;
+
+	list_add_sorted(new);
+
+	num_buses = end - start + 1;
+	res = &new->res;
+	res->start = addr + PCI_MMCFG_BUS_OFFSET(start);
+	res->end = addr + PCI_MMCFG_BUS_OFFSET(num_buses) - 1;
+	res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	snprintf(new->name, PCI_MMCFG_RESOURCE_NAME_LEN,
+		 "PCI MMCONFIG %04x [bus %02x-%02x]", segment, start, end);
+	res->name = new->name;
+
+	printk(KERN_INFO PREFIX "MMCONFIG for domain %04x [bus %02x-%02x] at "
+	       "%pR (base %#lx)\n", segment, start, end, &new->res,
+	       (unsigned long) addr);
+
+	return new;
 }
 
-static __init void fill_one_mmcfg(u64 addr, int segment, int start, int end)
+struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus)
 {
-	int i = pci_mmcfg_config_num;
+	struct pci_mmcfg_region *cfg;
 
-	pci_mmcfg_config_num++;
-	pci_mmcfg_config[i].address = addr;
-	pci_mmcfg_config[i].pci_segment = segment;
-	pci_mmcfg_config[i].start_bus_number = start;
-	pci_mmcfg_config[i].end_bus_number = end;
+	list_for_each_entry(cfg, &pci_mmcfg_list, list)
+		if (cfg->segment == segment &&
+		    cfg->start_bus <= bus && bus <= cfg->end_bus)
+			return cfg;
+
+	return NULL;
 }
 
 static const char __init *pci_mmcfg_e7520(void)
@@ -68,11 +118,9 @@ static const char __init *pci_mmcfg_e7520(void)
 	if (win == 0x0000 || win == 0xf000)
 		return NULL;
 
-	if (extend_mmcfg(1) == -1)
+	if (pci_mmconfig_add(0, 0, 255, win << 16) == NULL)
 		return NULL;
 
-	fill_one_mmcfg(win << 16, 0, 0, 255);
-
 	return "Intel Corporation E7520 Memory Controller Hub";
 }
 
@@ -114,11 +162,9 @@ static const char __init *pci_mmcfg_intel_945(void)
 	if ((pciexbar & mask) >= 0xf0000000U)
 		return NULL;
 
-	if (extend_mmcfg(1) == -1)
+	if (pci_mmconfig_add(0, 0, (len >> 20) - 1, pciexbar & mask) == NULL)
 		return NULL;
 
-	fill_one_mmcfg(pciexbar & mask, 0, 0, (len >> 20) - 1);
-
 	return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub";
 }
 
@@ -127,7 +173,7 @@ static const char __init *pci_mmcfg_amd_fam10h(void)
 	u32 low, high, address;
 	u64 base, msr;
 	int i;
-	unsigned segnbits = 0, busnbits;
+	unsigned segnbits = 0, busnbits, end_bus;
 
 	if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF))
 		return NULL;
@@ -161,11 +207,13 @@ static const char __init *pci_mmcfg_amd_fam10h(void)
 		busnbits = 8;
 	}
 
-	if (extend_mmcfg(1 << segnbits) == -1)
-		return NULL;
-
+	end_bus = (1 << busnbits) - 1;
 	for (i = 0; i < (1 << segnbits); i++)
-		fill_one_mmcfg(base + (1<<28) * i, i, 0, (1 << busnbits) - 1);
+		if (pci_mmconfig_add(i, 0, end_bus,
+				     base + (1<<28) * i) == NULL) {
+			free_all_mmcfg();
+			return NULL;
+		}
 
 	return "AMD Family 10h NB";
 }
@@ -190,7 +238,7 @@ static const char __init *pci_mmcfg_nvidia_mcp55(void)
 	/*
 	 * do check if amd fam10h already took over
 	 */
-	if (!acpi_disabled || pci_mmcfg_config_num || mcp55_checked)
+	if (!acpi_disabled || !list_empty(&pci_mmcfg_list) || mcp55_checked)
 		return NULL;
 
 	mcp55_checked = true;
@@ -213,16 +261,14 @@ static const char __init *pci_mmcfg_nvidia_mcp55(void)
 		if (!(extcfg & extcfg_enable_mask))
 			continue;
 
-		if (extend_mmcfg(1) == -1)
-			continue;
-
 		size_index = (extcfg & extcfg_size_mask) >> extcfg_size_shift;
 		base = extcfg & extcfg_base_mask[size_index];
 		/* base could > 4G */
 		base <<= extcfg_base_lshift;
 		start = (extcfg & extcfg_start_mask) >> extcfg_start_shift;
 		end = start + extcfg_sizebus[size_index] - 1;
-		fill_one_mmcfg(base, 0, start, end);
+		if (pci_mmconfig_add(0, start, end, base) == NULL)
+			continue;
 		mcp55_mmconf_found++;
 	}
 
@@ -253,45 +299,27 @@ static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = {
 	  0x0369, pci_mmcfg_nvidia_mcp55 },
 };
 
-static int __init cmp_mmcfg(const void *x1, const void *x2)
-{
-	const typeof(pci_mmcfg_config[0]) *m1 = x1;
-	const typeof(pci_mmcfg_config[0]) *m2 = x2;
-	int start1, start2;
-
-	start1 = m1->start_bus_number;
-	start2 = m2->start_bus_number;
-
-	return start1 - start2;
-}
-
 static void __init pci_mmcfg_check_end_bus_number(void)
 {
-	int i;
-	typeof(pci_mmcfg_config[0]) *cfg, *cfgx;
-
-	/* sort them at first */
-	sort(pci_mmcfg_config, pci_mmcfg_config_num,
-		 sizeof(pci_mmcfg_config[0]), cmp_mmcfg, NULL);
+	struct pci_mmcfg_region *cfg, *cfgx;
 
 	/* last one*/
-	if (pci_mmcfg_config_num > 0) {
-		i = pci_mmcfg_config_num - 1;
-		cfg = &pci_mmcfg_config[i];
-		if (cfg->end_bus_number < cfg->start_bus_number)
-			cfg->end_bus_number = 255;
-	}
+	cfg = list_entry(pci_mmcfg_list.prev, typeof(*cfg), list);
+	if (cfg)
+		if (cfg->end_bus < cfg->start_bus)
+			cfg->end_bus = 255;
 
-	/* don't overlap please */
-	for (i = 0; i < pci_mmcfg_config_num - 1; i++) {
-		cfg = &pci_mmcfg_config[i];
-		cfgx = &pci_mmcfg_config[i+1];
+	if (list_is_singular(&pci_mmcfg_list))
+		return;
 
-		if (cfg->end_bus_number < cfg->start_bus_number)
-			cfg->end_bus_number = 255;
+	/* don't overlap please */
+	list_for_each_entry(cfg, &pci_mmcfg_list, list) {
+		if (cfg->end_bus < cfg->start_bus)
+			cfg->end_bus = 255;
 
-		if (cfg->end_bus_number >= cfgx->start_bus_number)
-			cfg->end_bus_number = cfgx->start_bus_number - 1;
+		cfgx = list_entry(cfg->list.next, typeof(*cfg), list);
+		if (cfg != cfgx && cfg->end_bus >= cfgx->start_bus)
+			cfg->end_bus = cfgx->start_bus - 1;
 	}
 }
 
@@ -306,8 +334,7 @@ static int __init pci_mmcfg_check_hostbridge(void)
 	if (!raw_pci_ops)
 		return 0;
 
-	pci_mmcfg_config_num = 0;
-	pci_mmcfg_config = NULL;
+	free_all_mmcfg();
 
 	for (i = 0; i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
 		bus =  pci_mmcfg_probes[i].bus;
@@ -322,45 +349,22 @@ static int __init pci_mmcfg_check_hostbridge(void)
 			name = pci_mmcfg_probes[i].probe();
 
 		if (name)
-			printk(KERN_INFO "PCI: Found %s with MMCONFIG support.\n",
+			printk(KERN_INFO PREFIX "%s with MMCONFIG support\n",
 			       name);
 	}
 
 	/* some end_bus_number is crazy, fix it */
 	pci_mmcfg_check_end_bus_number();
 
-	return pci_mmcfg_config_num != 0;
+	return !list_empty(&pci_mmcfg_list);
 }
 
 static void __init pci_mmcfg_insert_resources(void)
 {
-#define PCI_MMCFG_RESOURCE_NAME_LEN 24
-	int i;
-	struct resource *res;
-	char *names;
-	unsigned num_buses;
-
-	res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
-			pci_mmcfg_config_num, GFP_KERNEL);
-	if (!res) {
-		printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
-		return;
-	}
+	struct pci_mmcfg_region *cfg;
 
-	names = (void *)&res[pci_mmcfg_config_num];
-	for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
-		struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[i];
-		num_buses = cfg->end_bus_number - cfg->start_bus_number + 1;
-		res->name = names;
-		snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN,
-			 "PCI MMCONFIG %u [%02x-%02x]", cfg->pci_segment,
-			 cfg->start_bus_number, cfg->end_bus_number);
-		res->start = cfg->address + (cfg->start_bus_number << 20);
-		res->end = res->start + (num_buses << 20) - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		insert_resource(&iomem_resource, res);
-		names += PCI_MMCFG_RESOURCE_NAME_LEN;
-	}
+	list_for_each_entry(cfg, &pci_mmcfg_list, list)
+		insert_resource(&iomem_resource, &cfg->res);
 
 	/* Mark that the resources have been inserted. */
 	pci_mmcfg_resources_inserted = 1;
@@ -437,11 +441,12 @@ static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
 typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
 
 static int __init is_mmconf_reserved(check_reserved_t is_reserved,
-		u64 addr, u64 size, int i,
-		typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
+				    struct pci_mmcfg_region *cfg, int with_e820)
 {
+	u64 addr = cfg->res.start;
+	u64 size = resource_size(&cfg->res);
 	u64 old_size = size;
-	int valid = 0;
+	int valid = 0, num_buses;
 
 	while (!is_reserved(addr, addr + size, E820_RESERVED)) {
 		size >>= 1;
@@ -450,19 +455,25 @@ static int __init is_mmconf_reserved(check_reserved_t is_reserved,
 	}
 
 	if (size >= (16UL<<20) || size == old_size) {
-		printk(KERN_NOTICE
-		       "PCI: MCFG area at %Lx reserved in %s\n",
-			addr, with_e820?"E820":"ACPI motherboard resources");
+		printk(KERN_INFO PREFIX "MMCONFIG at %pR reserved in %s\n",
+		       &cfg->res,
+		       with_e820 ? "E820" : "ACPI motherboard resources");
 		valid = 1;
 
 		if (old_size != size) {
-			/* update end_bus_number */
-			cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
-			printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
-			       "segment %hu buses %u - %u\n",
-			       i, (unsigned long)cfg->address, cfg->pci_segment,
-			       (unsigned int)cfg->start_bus_number,
-			       (unsigned int)cfg->end_bus_number);
+			/* update end_bus */
+			cfg->end_bus = cfg->start_bus + ((size>>20) - 1);
+			num_buses = cfg->end_bus - cfg->start_bus + 1;
+			cfg->res.end = cfg->res.start +
+			    PCI_MMCFG_BUS_OFFSET(num_buses) - 1;
+			snprintf(cfg->name, PCI_MMCFG_RESOURCE_NAME_LEN,
+				 "PCI MMCONFIG %04x [bus %02x-%02x]",
+				 cfg->segment, cfg->start_bus, cfg->end_bus);
+			printk(KERN_INFO PREFIX
+			       "MMCONFIG for %04x [bus%02x-%02x] "
+			       "at %pR (base %#lx) (size reduced!)\n",
+			       cfg->segment, cfg->start_bus, cfg->end_bus,
+			       &cfg->res, (unsigned long) cfg->address);
 		}
 	}
 
@@ -471,45 +482,26 @@ static int __init is_mmconf_reserved(check_reserved_t is_reserved,
 
 static void __init pci_mmcfg_reject_broken(int early)
 {
-	typeof(pci_mmcfg_config[0]) *cfg;
-	int i;
+	struct pci_mmcfg_region *cfg;
 
-	if ((pci_mmcfg_config_num == 0) ||
-	    (pci_mmcfg_config == NULL) ||
-	    (pci_mmcfg_config[0].address == 0))
-		return;
-
-	for (i = 0; i < pci_mmcfg_config_num; i++) {
+	list_for_each_entry(cfg, &pci_mmcfg_list, list) {
 		int valid = 0;
-		u64 addr, size;
-
-		cfg = &pci_mmcfg_config[i];
-		addr = cfg->start_bus_number;
-		addr <<= 20;
-		addr += cfg->address;
-		size = cfg->end_bus_number + 1 - cfg->start_bus_number;
-		size <<= 20;
-		printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
-		       "segment %hu buses %u - %u\n",
-		       i, (unsigned long)cfg->address, cfg->pci_segment,
-		       (unsigned int)cfg->start_bus_number,
-		       (unsigned int)cfg->end_bus_number);
 
 		if (!early && !acpi_disabled)
-			valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
+			valid = is_mmconf_reserved(is_acpi_reserved, cfg, 0);
 
 		if (valid)
 			continue;
 
 		if (!early)
-			printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
-			       " reserved in ACPI motherboard resources\n",
-			       cfg->address);
+			printk(KERN_ERR FW_BUG PREFIX
+			       "MMCONFIG at %pR not reserved in "
+			       "ACPI motherboard resources\n", &cfg->res);
 
 		/* Don't try to do this check unless configuration
 		   type 1 is available. how about type 2 ?*/
 		if (raw_pci_ops)
-			valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
+			valid = is_mmconf_reserved(e820_all_mapped, cfg, 1);
 
 		if (!valid)
 			goto reject;
@@ -518,34 +510,41 @@ static void __init pci_mmcfg_reject_broken(int early)
 	return;
 
 reject:
-	printk(KERN_INFO "PCI: Not using MMCONFIG.\n");
-	pci_mmcfg_arch_free();
-	kfree(pci_mmcfg_config);
-	pci_mmcfg_config = NULL;
-	pci_mmcfg_config_num = 0;
+	printk(KERN_INFO PREFIX "not using MMCONFIG\n");
+	free_all_mmcfg();
 }
 
 static int __initdata known_bridge;
 
-static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+static int __init acpi_mcfg_check_entry(struct acpi_table_mcfg *mcfg,
+					struct acpi_mcfg_allocation *cfg)
+{
+	int year;
 
-/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
-struct acpi_mcfg_allocation *pci_mmcfg_config;
-int pci_mmcfg_config_num;
+	if (cfg->address < 0xFFFFFFFF)
+		return 0;
 
-static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
-{
 	if (!strcmp(mcfg->header.oem_id, "SGI"))
-		acpi_mcfg_64bit_base_addr = TRUE;
+		return 0;
 
-	return 0;
+	if (mcfg->header.revision >= 1) {
+		if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) &&
+		    year >= 2010)
+			return 0;
+	}
+
+	printk(KERN_ERR PREFIX "MCFG region for %04x [bus %02x-%02x] at %#llx "
+	       "is above 4GB, ignored\n", cfg->pci_segment,
+	       cfg->start_bus_number, cfg->end_bus_number, cfg->address);
+	return -EINVAL;
 }
 
 static int __init pci_parse_mcfg(struct acpi_table_header *header)
 {
 	struct acpi_table_mcfg *mcfg;
+	struct acpi_mcfg_allocation *cfg_table, *cfg;
 	unsigned long i;
-	int config_size;
+	int entries;
 
 	if (!header)
 		return -EINVAL;
@@ -553,38 +552,33 @@ static int __init pci_parse_mcfg(struct acpi_table_header *header)
 	mcfg = (struct acpi_table_mcfg *)header;
 
 	/* how many config structures do we have */
-	pci_mmcfg_config_num = 0;
+	free_all_mmcfg();
+	entries = 0;
 	i = header->length - sizeof(struct acpi_table_mcfg);
 	while (i >= sizeof(struct acpi_mcfg_allocation)) {
-		++pci_mmcfg_config_num;
+		entries++;
 		i -= sizeof(struct acpi_mcfg_allocation);
 	};
-	if (pci_mmcfg_config_num == 0) {
+	if (entries == 0) {
 		printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
 		return -ENODEV;
 	}
 
-	config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
-	pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
-	if (!pci_mmcfg_config) {
-		printk(KERN_WARNING PREFIX
-		       "No memory for MCFG config tables\n");
-		return -ENOMEM;
-	}
-
-	memcpy(pci_mmcfg_config, &mcfg[1], config_size);
-
-	acpi_mcfg_oem_check(mcfg);
-
-	for (i = 0; i < pci_mmcfg_config_num; ++i) {
-		if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
-		    !acpi_mcfg_64bit_base_addr) {
-			printk(KERN_ERR PREFIX
-			       "MMCONFIG not in low 4GB of memory\n");
-			kfree(pci_mmcfg_config);
-			pci_mmcfg_config_num = 0;
+	cfg_table = (struct acpi_mcfg_allocation *) &mcfg[1];
+	for (i = 0; i < entries; i++) {
+		cfg = &cfg_table[i];
+		if (acpi_mcfg_check_entry(mcfg, cfg)) {
+			free_all_mmcfg();
 			return -ENODEV;
 		}
+
+		if (pci_mmconfig_add(cfg->pci_segment, cfg->start_bus_number,
+				   cfg->end_bus_number, cfg->address) == NULL) {
+			printk(KERN_WARNING PREFIX
+			       "no memory for MCFG entries\n");
+			free_all_mmcfg();
+			return -ENOMEM;
+		}
 	}
 
 	return 0;
@@ -614,9 +608,7 @@ static void __init __pci_mmcfg_init(int early)
 
 	pci_mmcfg_reject_broken(early);
 
-	if ((pci_mmcfg_config_num == 0) ||
-	    (pci_mmcfg_config == NULL) ||
-	    (pci_mmcfg_config[0].address == 0))
+	if (list_empty(&pci_mmcfg_list))
 		return;
 
 	if (pci_mmcfg_arch_init())
@@ -648,9 +640,7 @@ static int __init pci_mmcfg_late_insert_resources(void)
 	 */
 	if ((pci_mmcfg_resources_inserted == 1) ||
 	    (pci_probe & PCI_PROBE_MMCONF) == 0 ||
-	    (pci_mmcfg_config_num == 0) ||
-	    (pci_mmcfg_config == NULL) ||
-	    (pci_mmcfg_config[0].address == 0))
+	    list_empty(&pci_mmcfg_list))
 		return 1;
 
 	/*
diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c
index f10a7e94a84c..90d5fd476ed4 100644
--- a/arch/x86/pci/mmconfig_32.c
+++ b/arch/x86/pci/mmconfig_32.c
@@ -27,18 +27,10 @@ static int mmcfg_last_accessed_cpu;
  */
 static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn)
 {
-	struct acpi_mcfg_allocation *cfg;
-	int cfg_num;
-
-	for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) {
-		cfg = &pci_mmcfg_config[cfg_num];
-		if (cfg->pci_segment == seg &&
-		    (cfg->start_bus_number <= bus) &&
-		    (cfg->end_bus_number >= bus))
-			return cfg->address;
-	}
+	struct pci_mmcfg_region *cfg = pci_mmconfig_lookup(seg, bus);
 
-	/* Fall back to type 0 */
+	if (cfg)
+		return cfg->address;
 	return 0;
 }
 
@@ -47,7 +39,7 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn)
  */
 static void pci_exp_set_dev_base(unsigned int base, int bus, int devfn)
 {
-	u32 dev_base = base | (bus << 20) | (devfn << 12);
+	u32 dev_base = base | PCI_MMCFG_BUS_OFFSET(bus) | (devfn << 12);
 	int cpu = smp_processor_id();
 	if (dev_base != mmcfg_last_accessed_device ||
 	    cpu != mmcfg_last_accessed_cpu) {
diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c
index 94349f8b2f96..e783841bd1d7 100644
--- a/arch/x86/pci/mmconfig_64.c
+++ b/arch/x86/pci/mmconfig_64.c
@@ -12,38 +12,15 @@
 #include <asm/e820.h>
 #include <asm/pci_x86.h>
 
-/* Static virtual mapping of the MMCONFIG aperture */
-struct mmcfg_virt {
-	struct acpi_mcfg_allocation *cfg;
-	char __iomem *virt;
-};
-static struct mmcfg_virt *pci_mmcfg_virt;
-
-static char __iomem *get_virt(unsigned int seg, unsigned bus)
-{
-	struct acpi_mcfg_allocation *cfg;
-	int cfg_num;
-
-	for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) {
-		cfg = pci_mmcfg_virt[cfg_num].cfg;
-		if (cfg->pci_segment == seg &&
-		    (cfg->start_bus_number <= bus) &&
-		    (cfg->end_bus_number >= bus))
-			return pci_mmcfg_virt[cfg_num].virt;
-	}
-
-	/* Fall back to type 0 */
-	return NULL;
-}
+#define PREFIX "PCI: "
 
 static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
 {
-	char __iomem *addr;
+	struct pci_mmcfg_region *cfg = pci_mmconfig_lookup(seg, bus);
 
-	addr = get_virt(seg, bus);
-	if (!addr)
-		return NULL;
- 	return addr + ((bus << 20) | (devfn << 12));
+	if (cfg && cfg->virt)
+		return cfg->virt + (PCI_MMCFG_BUS_OFFSET(bus) | (devfn << 12));
+	return NULL;
 }
 
 static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
@@ -109,42 +86,30 @@ static struct pci_raw_ops pci_mmcfg = {
 	.write =	pci_mmcfg_write,
 };
 
-static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg)
+static void __iomem * __init mcfg_ioremap(struct pci_mmcfg_region *cfg)
 {
 	void __iomem *addr;
 	u64 start, size;
+	int num_buses;
 
-	start = cfg->start_bus_number;
-	start <<= 20;
-	start += cfg->address;
-	size = cfg->end_bus_number + 1 - cfg->start_bus_number;
-	size <<= 20;
+	start = cfg->address + PCI_MMCFG_BUS_OFFSET(cfg->start_bus);
+	num_buses = cfg->end_bus - cfg->start_bus + 1;
+	size = PCI_MMCFG_BUS_OFFSET(num_buses);
 	addr = ioremap_nocache(start, size);
-	if (addr) {
-		printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n",
-		       start, start + size - 1);
-		addr -= cfg->start_bus_number << 20;
-	}
+	if (addr)
+		addr -= PCI_MMCFG_BUS_OFFSET(cfg->start_bus);
 	return addr;
 }
 
 int __init pci_mmcfg_arch_init(void)
 {
-	int i;
-	pci_mmcfg_virt = kzalloc(sizeof(*pci_mmcfg_virt) *
-				 pci_mmcfg_config_num, GFP_KERNEL);
-	if (pci_mmcfg_virt == NULL) {
-		printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
-		return 0;
-	}
+	struct pci_mmcfg_region *cfg;
 
-	for (i = 0; i < pci_mmcfg_config_num; ++i) {
-		pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
-		pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]);
-		if (!pci_mmcfg_virt[i].virt) {
-			printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
-					"segment %d\n",
-				pci_mmcfg_config[i].pci_segment);
+	list_for_each_entry(cfg, &pci_mmcfg_list, list) {
+		cfg->virt = mcfg_ioremap(cfg);
+		if (!cfg->virt) {
+			printk(KERN_ERR PREFIX "can't map MMCONFIG at %pR\n",
+			       &cfg->res);
 			pci_mmcfg_arch_free();
 			return 0;
 		}
@@ -155,19 +120,12 @@ int __init pci_mmcfg_arch_init(void)
 
 void __init pci_mmcfg_arch_free(void)
 {
-	int i;
-
-	if (pci_mmcfg_virt == NULL)
-		return;
+	struct pci_mmcfg_region *cfg;
 
-	for (i = 0; i < pci_mmcfg_config_num; ++i) {
-		if (pci_mmcfg_virt[i].virt) {
-			iounmap(pci_mmcfg_virt[i].virt + (pci_mmcfg_virt[i].cfg->start_bus_number << 20));
-			pci_mmcfg_virt[i].virt = NULL;
-			pci_mmcfg_virt[i].cfg = NULL;
+	list_for_each_entry(cfg, &pci_mmcfg_list, list) {
+		if (cfg->virt) {
+			iounmap(cfg->virt + PCI_MMCFG_BUS_OFFSET(cfg->start_bus));
+			cfg->virt = NULL;
 		}
 	}
-
-	kfree(pci_mmcfg_virt);
-	pci_mmcfg_virt = NULL;
 }
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 8aa85f17667e..0a979f3e5b8a 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -18,6 +18,7 @@
 #include <asm/mce.h>
 #include <asm/xcr.h>
 #include <asm/suspend.h>
+#include <asm/debugreg.h>
 
 #ifdef CONFIG_X86_32
 static struct saved_context saved_context;
@@ -142,31 +143,6 @@ static void fix_processor_context(void)
 #endif
 	load_TR_desc();				/* This does ltr */
 	load_LDT(&current->active_mm->context);	/* This does lldt */
-
-	/*
-	 * Now maybe reload the debug registers
-	 */
-	if (current->thread.debugreg7) {
-#ifdef CONFIG_X86_32
-		set_debugreg(current->thread.debugreg0, 0);
-		set_debugreg(current->thread.debugreg1, 1);
-		set_debugreg(current->thread.debugreg2, 2);
-		set_debugreg(current->thread.debugreg3, 3);
-		/* no 4 and 5 */
-		set_debugreg(current->thread.debugreg6, 6);
-		set_debugreg(current->thread.debugreg7, 7);
-#else
-		/* CONFIG_X86_64 */
-		loaddebug(&current->thread, 0);
-		loaddebug(&current->thread, 1);
-		loaddebug(&current->thread, 2);
-		loaddebug(&current->thread, 3);
-		/* no 4 and 5 */
-		loaddebug(&current->thread, 6);
-		loaddebug(&current->thread, 7);
-#endif
-	}
-
 }
 
 /**
diff --git a/arch/x86/tools/Makefile b/arch/x86/tools/Makefile
new file mode 100644
index 000000000000..f82082677337
--- /dev/null
+++ b/arch/x86/tools/Makefile
@@ -0,0 +1,31 @@
+PHONY += posttest
+
+ifeq ($(KBUILD_VERBOSE),1)
+  posttest_verbose = -v
+else
+  posttest_verbose =
+endif
+
+ifeq ($(CONFIG_64BIT),y)
+  posttest_64bit = -y
+else
+  posttest_64bit = -n
+endif
+
+distill_awk = $(srctree)/arch/x86/tools/distill.awk
+chkobjdump = $(srctree)/arch/x86/tools/chkobjdump.awk
+
+quiet_cmd_posttest = TEST    $@
+      cmd_posttest = ($(OBJDUMP) -v | $(AWK) -f $(chkobjdump)) || $(OBJDUMP) -d -j .text $(objtree)/vmlinux | $(AWK) -f $(distill_awk) | $(obj)/test_get_len $(posttest_64bit) $(posttest_verbose)
+
+posttest: $(obj)/test_get_len vmlinux
+	$(call cmd,posttest)
+
+hostprogs-y	:= test_get_len
+
+# -I needed for generated C source and C source which in the kernel tree.
+HOSTCFLAGS_test_get_len.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/
+
+# Dependencies are also needed.
+$(obj)/test_get_len.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
+
diff --git a/arch/x86/tools/chkobjdump.awk b/arch/x86/tools/chkobjdump.awk
new file mode 100644
index 000000000000..0d13cd9fdcff
--- /dev/null
+++ b/arch/x86/tools/chkobjdump.awk
@@ -0,0 +1,23 @@
+# GNU objdump version checker
+#
+# Usage:
+# objdump -v | awk -f chkobjdump.awk
+BEGIN {
+	# objdump version 2.19 or later is OK for the test.
+	od_ver = 2;
+	od_sver = 19;
+}
+
+/^GNU/ {
+	split($4, ver, ".");
+	if (ver[1] > od_ver ||
+	    (ver[1] == od_ver && ver[2] >= od_sver)) {
+		exit 1;
+	} else {
+		printf("Warning: objdump version %s is older than %d.%d\n",
+		       $4, od_ver, od_sver);
+		print("Warning: Skipping posttest.");
+		# Logic is inverted, because we just skip test without error.
+		exit 0;
+	}
+}
diff --git a/arch/x86/tools/distill.awk b/arch/x86/tools/distill.awk
new file mode 100644
index 000000000000..c13c0ee48ab4
--- /dev/null
+++ b/arch/x86/tools/distill.awk
@@ -0,0 +1,47 @@
+#!/bin/awk -f
+# Usage: objdump -d a.out | awk -f distill.awk | ./test_get_len
+# Distills the disassembly as follows:
+# - Removes all lines except the disassembled instructions.
+# - For instructions that exceed 1 line (7 bytes), crams all the hex bytes
+# into a single line.
+# - Remove bad(or prefix only) instructions
+
+BEGIN {
+	prev_addr = ""
+	prev_hex = ""
+	prev_mnemonic = ""
+	bad_expr = "(\\(bad\\)|^rex|^.byte|^rep(z|nz)$|^lock$|^es$|^cs$|^ss$|^ds$|^fs$|^gs$|^data(16|32)$|^addr(16|32|64))"
+	fwait_expr = "^9b "
+	fwait_str="9b\tfwait"
+}
+
+/^ *[0-9a-f]+ <[^>]*>:/ {
+	# Symbol entry
+	printf("%s%s\n", $2, $1)
+}
+
+/^ *[0-9a-f]+:/ {
+	if (split($0, field, "\t") < 3) {
+		# This is a continuation of the same insn.
+		prev_hex = prev_hex field[2]
+	} else {
+		# Skip bad instructions
+		if (match(prev_mnemonic, bad_expr))
+			prev_addr = ""
+		# Split fwait from other f* instructions
+		if (match(prev_hex, fwait_expr) && prev_mnemonic != "fwait") {
+			printf "%s\t%s\n", prev_addr, fwait_str
+			sub(fwait_expr, "", prev_hex)
+		}
+		if (prev_addr != "")
+			printf "%s\t%s\t%s\n", prev_addr, prev_hex, prev_mnemonic
+		prev_addr = field[1]
+		prev_hex = field[2]
+		prev_mnemonic = field[3]
+	}
+}
+
+END {
+	if (prev_addr != "")
+		printf "%s\t%s\t%s\n", prev_addr, prev_hex, prev_mnemonic
+}
diff --git a/arch/x86/tools/gen-insn-attr-x86.awk b/arch/x86/tools/gen-insn-attr-x86.awk
new file mode 100644
index 000000000000..e34e92a28eb6
--- /dev/null
+++ b/arch/x86/tools/gen-insn-attr-x86.awk
@@ -0,0 +1,380 @@
+#!/bin/awk -f
+# gen-insn-attr-x86.awk: Instruction attribute table generator
+# Written by Masami Hiramatsu <mhiramat@redhat.com>
+#
+# Usage: awk -f gen-insn-attr-x86.awk x86-opcode-map.txt > inat-tables.c
+
+# Awk implementation sanity check
+function check_awk_implement() {
+	if (!match("abc", "[[:lower:]]+"))
+		return "Your awk doesn't support charactor-class."
+	if (sprintf("%x", 0) != "0")
+		return "Your awk has a printf-format problem."
+	return ""
+}
+
+# Clear working vars
+function clear_vars() {
+	delete table
+	delete lptable2
+	delete lptable1
+	delete lptable3
+	eid = -1 # escape id
+	gid = -1 # group id
+	aid = -1 # AVX id
+	tname = ""
+}
+
+BEGIN {
+	# Implementation error checking
+	awkchecked = check_awk_implement()
+	if (awkchecked != "") {
+		print "Error: " awkchecked > "/dev/stderr"
+		print "Please try to use gawk." > "/dev/stderr"
+		exit 1
+	}
+
+	# Setup generating tables
+	print "/* x86 opcode map generated from x86-opcode-map.txt */"
+	print "/* Do not change this code. */\n"
+	ggid = 1
+	geid = 1
+	gaid = 0
+	delete etable
+	delete gtable
+	delete atable
+
+	opnd_expr = "^[[:alpha:]/]"
+	ext_expr = "^\\("
+	sep_expr = "^\\|$"
+	group_expr = "^Grp[[:alnum:]]+"
+
+	imm_expr = "^[IJAO][[:lower:]]"
+	imm_flag["Ib"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)"
+	imm_flag["Jb"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)"
+	imm_flag["Iw"] = "INAT_MAKE_IMM(INAT_IMM_WORD)"
+	imm_flag["Id"] = "INAT_MAKE_IMM(INAT_IMM_DWORD)"
+	imm_flag["Iq"] = "INAT_MAKE_IMM(INAT_IMM_QWORD)"
+	imm_flag["Ap"] = "INAT_MAKE_IMM(INAT_IMM_PTR)"
+	imm_flag["Iz"] = "INAT_MAKE_IMM(INAT_IMM_VWORD32)"
+	imm_flag["Jz"] = "INAT_MAKE_IMM(INAT_IMM_VWORD32)"
+	imm_flag["Iv"] = "INAT_MAKE_IMM(INAT_IMM_VWORD)"
+	imm_flag["Ob"] = "INAT_MOFFSET"
+	imm_flag["Ov"] = "INAT_MOFFSET"
+
+	modrm_expr = "^([CDEGMNPQRSUVW/][[:lower:]]+|NTA|T[012])"
+	force64_expr = "\\([df]64\\)"
+	rex_expr = "^REX(\\.[XRWB]+)*"
+	fpu_expr = "^ESC" # TODO
+
+	lprefix1_expr = "\\(66\\)"
+	lprefix2_expr = "\\(F3\\)"
+	lprefix3_expr = "\\(F2\\)"
+	max_lprefix = 4
+
+	vexok_expr = "\\(VEX\\)"
+	vexonly_expr = "\\(oVEX\\)"
+
+	prefix_expr = "\\(Prefix\\)"
+	prefix_num["Operand-Size"] = "INAT_PFX_OPNDSZ"
+	prefix_num["REPNE"] = "INAT_PFX_REPNE"
+	prefix_num["REP/REPE"] = "INAT_PFX_REPE"
+	prefix_num["LOCK"] = "INAT_PFX_LOCK"
+	prefix_num["SEG=CS"] = "INAT_PFX_CS"
+	prefix_num["SEG=DS"] = "INAT_PFX_DS"
+	prefix_num["SEG=ES"] = "INAT_PFX_ES"
+	prefix_num["SEG=FS"] = "INAT_PFX_FS"
+	prefix_num["SEG=GS"] = "INAT_PFX_GS"
+	prefix_num["SEG=SS"] = "INAT_PFX_SS"
+	prefix_num["Address-Size"] = "INAT_PFX_ADDRSZ"
+	prefix_num["2bytes-VEX"] = "INAT_PFX_VEX2"
+	prefix_num["3bytes-VEX"] = "INAT_PFX_VEX3"
+
+	clear_vars()
+}
+
+function semantic_error(msg) {
+	print "Semantic error at " NR ": " msg > "/dev/stderr"
+	exit 1
+}
+
+function debug(msg) {
+	print "DEBUG: " msg
+}
+
+function array_size(arr,   i,c) {
+	c = 0
+	for (i in arr)
+		c++
+	return c
+}
+
+/^Table:/ {
+	print "/* " $0 " */"
+	if (tname != "")
+		semantic_error("Hit Table: before EndTable:.");
+}
+
+/^Referrer:/ {
+	if (NF != 1) {
+		# escape opcode table
+		ref = ""
+		for (i = 2; i <= NF; i++)
+			ref = ref $i
+		eid = escape[ref]
+		tname = sprintf("inat_escape_table_%d", eid)
+	}
+}
+
+/^AVXcode:/ {
+	if (NF != 1) {
+		# AVX/escape opcode table
+		aid = $2
+		if (gaid <= aid)
+			gaid = aid + 1
+		if (tname == "")	# AVX only opcode table
+			tname = sprintf("inat_avx_table_%d", $2)
+	}
+	if (aid == -1 && eid == -1)	# primary opcode table
+		tname = "inat_primary_table"
+}
+
+/^GrpTable:/ {
+	print "/* " $0 " */"
+	if (!($2 in group))
+		semantic_error("No group: " $2 )
+	gid = group[$2]
+	tname = "inat_group_table_" gid
+}
+
+function print_table(tbl,name,fmt,n)
+{
+	print "const insn_attr_t " name " = {"
+	for (i = 0; i < n; i++) {
+		id = sprintf(fmt, i)
+		if (tbl[id])
+			print "	[" id "] = " tbl[id] ","
+	}
+	print "};"
+}
+
+/^EndTable/ {
+	if (gid != -1) {
+		# print group tables
+		if (array_size(table) != 0) {
+			print_table(table, tname "[INAT_GROUP_TABLE_SIZE]",
+				    "0x%x", 8)
+			gtable[gid,0] = tname
+		}
+		if (array_size(lptable1) != 0) {
+			print_table(lptable1, tname "_1[INAT_GROUP_TABLE_SIZE]",
+				    "0x%x", 8)
+			gtable[gid,1] = tname "_1"
+		}
+		if (array_size(lptable2) != 0) {
+			print_table(lptable2, tname "_2[INAT_GROUP_TABLE_SIZE]",
+				    "0x%x", 8)
+			gtable[gid,2] = tname "_2"
+		}
+		if (array_size(lptable3) != 0) {
+			print_table(lptable3, tname "_3[INAT_GROUP_TABLE_SIZE]",
+				    "0x%x", 8)
+			gtable[gid,3] = tname "_3"
+		}
+	} else {
+		# print primary/escaped tables
+		if (array_size(table) != 0) {
+			print_table(table, tname "[INAT_OPCODE_TABLE_SIZE]",
+				    "0x%02x", 256)
+			etable[eid,0] = tname
+			if (aid >= 0)
+				atable[aid,0] = tname
+		}
+		if (array_size(lptable1) != 0) {
+			print_table(lptable1,tname "_1[INAT_OPCODE_TABLE_SIZE]",
+				    "0x%02x", 256)
+			etable[eid,1] = tname "_1"
+			if (aid >= 0)
+				atable[aid,1] = tname "_1"
+		}
+		if (array_size(lptable2) != 0) {
+			print_table(lptable2,tname "_2[INAT_OPCODE_TABLE_SIZE]",
+				    "0x%02x", 256)
+			etable[eid,2] = tname "_2"
+			if (aid >= 0)
+				atable[aid,2] = tname "_2"
+		}
+		if (array_size(lptable3) != 0) {
+			print_table(lptable3,tname "_3[INAT_OPCODE_TABLE_SIZE]",
+				    "0x%02x", 256)
+			etable[eid,3] = tname "_3"
+			if (aid >= 0)
+				atable[aid,3] = tname "_3"
+		}
+	}
+	print ""
+	clear_vars()
+}
+
+function add_flags(old,new) {
+	if (old && new)
+		return old " | " new
+	else if (old)
+		return old
+	else
+		return new
+}
+
+# convert operands to flags.
+function convert_operands(opnd,       i,imm,mod)
+{
+	imm = null
+	mod = null
+	for (i in opnd) {
+		i  = opnd[i]
+		if (match(i, imm_expr) == 1) {
+			if (!imm_flag[i])
+				semantic_error("Unknown imm opnd: " i)
+			if (imm) {
+				if (i != "Ib")
+					semantic_error("Second IMM error")
+				imm = add_flags(imm, "INAT_SCNDIMM")
+			} else
+				imm = imm_flag[i]
+		} else if (match(i, modrm_expr))
+			mod = "INAT_MODRM"
+	}
+	return add_flags(imm, mod)
+}
+
+/^[0-9a-f]+\:/ {
+	if (NR == 1)
+		next
+	# get index
+	idx = "0x" substr($1, 1, index($1,":") - 1)
+	if (idx in table)
+		semantic_error("Redefine " idx " in " tname)
+
+	# check if escaped opcode
+	if ("escape" == $2) {
+		if ($3 != "#")
+			semantic_error("No escaped name")
+		ref = ""
+		for (i = 4; i <= NF; i++)
+			ref = ref $i
+		if (ref in escape)
+			semantic_error("Redefine escape (" ref ")")
+		escape[ref] = geid
+		geid++
+		table[idx] = "INAT_MAKE_ESCAPE(" escape[ref] ")"
+		next
+	}
+
+	variant = null
+	# converts
+	i = 2
+	while (i <= NF) {
+		opcode = $(i++)
+		delete opnds
+		ext = null
+		flags = null
+		opnd = null
+		# parse one opcode
+		if (match($i, opnd_expr)) {
+			opnd = $i
+			split($(i++), opnds, ",")
+			flags = convert_operands(opnds)
+		}
+		if (match($i, ext_expr))
+			ext = $(i++)
+		if (match($i, sep_expr))
+			i++
+		else if (i < NF)
+			semantic_error($i " is not a separator")
+
+		# check if group opcode
+		if (match(opcode, group_expr)) {
+			if (!(opcode in group)) {
+				group[opcode] = ggid
+				ggid++
+			}
+			flags = add_flags(flags, "INAT_MAKE_GROUP(" group[opcode] ")")
+		}
+		# check force(or default) 64bit
+		if (match(ext, force64_expr))
+			flags = add_flags(flags, "INAT_FORCE64")
+
+		# check REX prefix
+		if (match(opcode, rex_expr))
+			flags = add_flags(flags, "INAT_MAKE_PREFIX(INAT_PFX_REX)")
+
+		# check coprocessor escape : TODO
+		if (match(opcode, fpu_expr))
+			flags = add_flags(flags, "INAT_MODRM")
+
+		# check VEX only code
+		if (match(ext, vexonly_expr))
+			flags = add_flags(flags, "INAT_VEXOK | INAT_VEXONLY")
+
+		# check VEX only code
+		if (match(ext, vexok_expr))
+			flags = add_flags(flags, "INAT_VEXOK")
+
+		# check prefixes
+		if (match(ext, prefix_expr)) {
+			if (!prefix_num[opcode])
+				semantic_error("Unknown prefix: " opcode)
+			flags = add_flags(flags, "INAT_MAKE_PREFIX(" prefix_num[opcode] ")")
+		}
+		if (length(flags) == 0)
+			continue
+		# check if last prefix
+		if (match(ext, lprefix1_expr)) {
+			lptable1[idx] = add_flags(lptable1[idx],flags)
+			variant = "INAT_VARIANT"
+		} else if (match(ext, lprefix2_expr)) {
+			lptable2[idx] = add_flags(lptable2[idx],flags)
+			variant = "INAT_VARIANT"
+		} else if (match(ext, lprefix3_expr)) {
+			lptable3[idx] = add_flags(lptable3[idx],flags)
+			variant = "INAT_VARIANT"
+		} else {
+			table[idx] = add_flags(table[idx],flags)
+		}
+	}
+	if (variant)
+		table[idx] = add_flags(table[idx],variant)
+}
+
+END {
+	if (awkchecked != "")
+		exit 1
+	# print escape opcode map's array
+	print "/* Escape opcode map array */"
+	print "const insn_attr_t const *inat_escape_tables[INAT_ESC_MAX + 1]" \
+	      "[INAT_LSTPFX_MAX + 1] = {"
+	for (i = 0; i < geid; i++)
+		for (j = 0; j < max_lprefix; j++)
+			if (etable[i,j])
+				print "	["i"]["j"] = "etable[i,j]","
+	print "};\n"
+	# print group opcode map's array
+	print "/* Group opcode map array */"
+	print "const insn_attr_t const *inat_group_tables[INAT_GRP_MAX + 1]"\
+	      "[INAT_LSTPFX_MAX + 1] = {"
+	for (i = 0; i < ggid; i++)
+		for (j = 0; j < max_lprefix; j++)
+			if (gtable[i,j])
+				print "	["i"]["j"] = "gtable[i,j]","
+	print "};\n"
+	# print AVX opcode map's array
+	print "/* AVX opcode map array */"
+	print "const insn_attr_t const *inat_avx_tables[X86_VEX_M_MAX + 1]"\
+	      "[INAT_LSTPFX_MAX + 1] = {"
+	for (i = 0; i < gaid; i++)
+		for (j = 0; j < max_lprefix; j++)
+			if (atable[i,j])
+				print "	["i"]["j"] = "atable[i,j]","
+	print "};"
+}
+
diff --git a/arch/x86/tools/test_get_len.c b/arch/x86/tools/test_get_len.c
new file mode 100644
index 000000000000..bee8d6ac2691
--- /dev/null
+++ b/arch/x86/tools/test_get_len.c
@@ -0,0 +1,173 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2009
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include <unistd.h>
+
+#define unlikely(cond) (cond)
+
+#include <asm/insn.h>
+#include <inat.c>
+#include <insn.c>
+
+/*
+ * Test of instruction analysis in general and insn_get_length() in
+ * particular.  See if insn_get_length() and the disassembler agree
+ * on the length of each instruction in an elf disassembly.
+ *
+ * Usage: objdump -d a.out | awk -f distill.awk | ./test_get_len
+ */
+
+const char *prog;
+static int verbose;
+static int x86_64;
+
+static void usage(void)
+{
+	fprintf(stderr, "Usage: objdump -d a.out | awk -f distill.awk |"
+		" %s [-y|-n] [-v] \n", prog);
+	fprintf(stderr, "\t-y	64bit mode\n");
+	fprintf(stderr, "\t-n	32bit mode\n");
+	fprintf(stderr, "\t-v	verbose mode\n");
+	exit(1);
+}
+
+static void malformed_line(const char *line, int line_nr)
+{
+	fprintf(stderr, "%s: malformed line %d:\n%s", prog, line_nr, line);
+	exit(3);
+}
+
+static void dump_field(FILE *fp, const char *name, const char *indent,
+		       struct insn_field *field)
+{
+	fprintf(fp, "%s.%s = {\n", indent, name);
+	fprintf(fp, "%s\t.value = %d, bytes[] = {%x, %x, %x, %x},\n",
+		indent, field->value, field->bytes[0], field->bytes[1],
+		field->bytes[2], field->bytes[3]);
+	fprintf(fp, "%s\t.got = %d, .nbytes = %d},\n", indent,
+		field->got, field->nbytes);
+}
+
+static void dump_insn(FILE *fp, struct insn *insn)
+{
+	fprintf(fp, "Instruction = { \n");
+	dump_field(fp, "prefixes", "\t",	&insn->prefixes);
+	dump_field(fp, "rex_prefix", "\t",	&insn->rex_prefix);
+	dump_field(fp, "vex_prefix", "\t",	&insn->vex_prefix);
+	dump_field(fp, "opcode", "\t",		&insn->opcode);
+	dump_field(fp, "modrm", "\t",		&insn->modrm);
+	dump_field(fp, "sib", "\t",		&insn->sib);
+	dump_field(fp, "displacement", "\t",	&insn->displacement);
+	dump_field(fp, "immediate1", "\t",	&insn->immediate1);
+	dump_field(fp, "immediate2", "\t",	&insn->immediate2);
+	fprintf(fp, "\t.attr = %x, .opnd_bytes = %d, .addr_bytes = %d,\n",
+		insn->attr, insn->opnd_bytes, insn->addr_bytes);
+	fprintf(fp, "\t.length = %d, .x86_64 = %d, .kaddr = %p}\n",
+		insn->length, insn->x86_64, insn->kaddr);
+}
+
+static void parse_args(int argc, char **argv)
+{
+	int c;
+	prog = argv[0];
+	while ((c = getopt(argc, argv, "ynv")) != -1) {
+		switch (c) {
+		case 'y':
+			x86_64 = 1;
+			break;
+		case 'n':
+			x86_64 = 0;
+			break;
+		case 'v':
+			verbose = 1;
+			break;
+		default:
+			usage();
+		}
+	}
+}
+
+#define BUFSIZE 256
+
+int main(int argc, char **argv)
+{
+	char line[BUFSIZE], sym[BUFSIZE] = "<unknown>";
+	unsigned char insn_buf[16];
+	struct insn insn;
+	int insns = 0;
+	int warnings = 0;
+
+	parse_args(argc, argv);
+
+	while (fgets(line, BUFSIZE, stdin)) {
+		char copy[BUFSIZE], *s, *tab1, *tab2;
+		int nb = 0;
+		unsigned int b;
+
+		if (line[0] == '<') {
+			/* Symbol line */
+			strcpy(sym, line);
+			continue;
+		}
+
+		insns++;
+		memset(insn_buf, 0, 16);
+		strcpy(copy, line);
+		tab1 = strchr(copy, '\t');
+		if (!tab1)
+			malformed_line(line, insns);
+		s = tab1 + 1;
+		s += strspn(s, " ");
+		tab2 = strchr(s, '\t');
+		if (!tab2)
+			malformed_line(line, insns);
+		*tab2 = '\0';	/* Characters beyond tab2 aren't examined */
+		while (s < tab2) {
+			if (sscanf(s, "%x", &b) == 1) {
+				insn_buf[nb++] = (unsigned char) b;
+				s += 3;
+			} else
+				break;
+		}
+		/* Decode an instruction */
+		insn_init(&insn, insn_buf, x86_64);
+		insn_get_length(&insn);
+		if (insn.length != nb) {
+			warnings++;
+			fprintf(stderr, "Warning: %s found difference at %s\n",
+				prog, sym);
+			fprintf(stderr, "Warning: %s", line);
+			fprintf(stderr, "Warning: objdump says %d bytes, but "
+				"insn_get_length() says %d\n", nb,
+				insn.length);
+			if (verbose)
+				dump_insn(stderr, &insn);
+		}
+	}
+	if (warnings)
+		fprintf(stderr, "Warning: decoded and checked %d"
+			" instructions with %d warnings\n", insns, warnings);
+	else
+		fprintf(stderr, "Succeed: decoded and checked %d"
+			" instructions\n", insns);
+	return 0;
+}
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index 58bc00f68b12..02b442e92007 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -393,7 +393,6 @@ static ctl_table abi_table2[] = {
 
 static ctl_table abi_root_table2[] = {
 	{
-		.ctl_name = CTL_ABI,
 		.procname = "abi",
 		.mode = 0555,
 		.child = abi_table2
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index dfbf70e65860..2b26dd5930c6 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -27,7 +27,9 @@
 #include <linux/page-flags.h>
 #include <linux/highmem.h>
 #include <linux/console.h>
+#include <linux/pci.h>
 
+#include <xen/xen.h>
 #include <xen/interface/xen.h>
 #include <xen/interface/version.h>
 #include <xen/interface/physdev.h>
@@ -138,24 +140,23 @@ static void xen_vcpu_setup(int cpu)
  */
 void xen_vcpu_restore(void)
 {
-	if (have_vcpu_info_placement) {
-		int cpu;
+	int cpu;
 
-		for_each_online_cpu(cpu) {
-			bool other_cpu = (cpu != smp_processor_id());
+	for_each_online_cpu(cpu) {
+		bool other_cpu = (cpu != smp_processor_id());
 
-			if (other_cpu &&
-			    HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL))
-				BUG();
+		if (other_cpu &&
+		    HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL))
+			BUG();
 
-			xen_vcpu_setup(cpu);
+		xen_setup_runstate_info(cpu);
 
-			if (other_cpu &&
-			    HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL))
-				BUG();
-		}
+		if (have_vcpu_info_placement)
+			xen_vcpu_setup(cpu);
 
-		BUG_ON(!have_vcpu_info_placement);
+		if (other_cpu &&
+		    HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL))
+			BUG();
 	}
 }
 
@@ -1093,10 +1094,8 @@ asmlinkage void __init xen_start_kernel(void)
 
 	__supported_pte_mask |= _PAGE_IOMAP;
 
-#ifdef CONFIG_X86_64
 	/* Work out if we support NX */
-	check_efer();
-#endif
+	x86_configure_nx();
 
 	xen_setup_features();
 
@@ -1178,10 +1177,16 @@ asmlinkage void __init xen_start_kernel(void)
 		add_preferred_console("xenboot", 0, NULL);
 		add_preferred_console("tty", 0, NULL);
 		add_preferred_console("hvc", 0, NULL);
+	} else {
+		/* Make sure ACS will be enabled */
+		pci_request_acs();
 	}
+		
 
 	xen_raw_console_write("about to get started...\n");
 
+	xen_setup_runstate_info(0);
+
 	/* Start the world */
 #ifdef CONFIG_X86_32
 	i386_start_kernel();
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 3bf7b1d250ce..bf4cd6bfe959 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -185,7 +185,7 @@ static inline unsigned p2m_index(unsigned long pfn)
 }
 
 /* Build the parallel p2m_top_mfn structures */
-static void __init xen_build_mfn_list_list(void)
+void xen_build_mfn_list_list(void)
 {
 	unsigned pfn, idx;
 
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index fe03eeed7b48..64757c0ba5fc 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -73,7 +73,7 @@ static __cpuinit void cpu_bringup(void)
 
 	xen_setup_cpu_clockevents();
 
-	cpu_set(cpu, cpu_online_map);
+	set_cpu_online(cpu, true);
 	percpu_write(cpu_state, CPU_ONLINE);
 	wmb();
 
@@ -295,6 +295,7 @@ static int __cpuinit xen_cpu_up(unsigned int cpu)
 		(unsigned long)task_stack_page(idle) -
 		KERNEL_STACK_OFFSET + THREAD_SIZE;
 #endif
+	xen_setup_runstate_info(cpu);
 	xen_setup_timer(cpu);
 	xen_init_lock_cpu(cpu);
 
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index 95be7b434724..987267f79bf5 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -1,4 +1,5 @@
 #include <linux/types.h>
+#include <linux/clockchips.h>
 
 #include <xen/interface/xen.h>
 #include <xen/grant_table.h>
@@ -27,6 +28,8 @@ void xen_pre_suspend(void)
 
 void xen_post_suspend(int suspend_cancelled)
 {
+	xen_build_mfn_list_list();
+
 	xen_setup_shared_info();
 
 	if (suspend_cancelled) {
@@ -44,7 +47,19 @@ void xen_post_suspend(int suspend_cancelled)
 
 }
 
+static void xen_vcpu_notify_restore(void *data)
+{
+	unsigned long reason = (unsigned long)data;
+
+	/* Boot processor notified via generic timekeeping_resume() */
+	if ( smp_processor_id() == 0)
+		return;
+
+	clockevents_notify(reason, NULL);
+}
+
 void xen_arch_resume(void)
 {
-	/* nothing */
+	smp_call_function(xen_vcpu_notify_restore,
+			       (void *)CLOCK_EVT_NOTIFY_RESUME, 1);
 }
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 0a5aa44299a5..9d1f853120d8 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -100,7 +100,7 @@ bool xen_vcpu_stolen(int vcpu)
 	return per_cpu(runstate, vcpu).state == RUNSTATE_runnable;
 }
 
-static void setup_runstate_info(int cpu)
+void xen_setup_runstate_info(int cpu)
 {
 	struct vcpu_register_runstate_memory_area area;
 
@@ -434,7 +434,7 @@ void xen_setup_timer(int cpu)
 		name = "<timer kasprintf failed>";
 
 	irq = bind_virq_to_irqhandler(VIRQ_TIMER, cpu, xen_timer_interrupt,
-				      IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+				      IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING|IRQF_TIMER,
 				      name, NULL);
 
 	evt = &per_cpu(xen_clock_events, cpu);
@@ -442,8 +442,6 @@ void xen_setup_timer(int cpu)
 
 	evt->cpumask = cpumask_of(cpu);
 	evt->irq = irq;
-
-	setup_runstate_info(cpu);
 }
 
 void xen_teardown_timer(int cpu)
@@ -494,6 +492,7 @@ __init void xen_time_init(void)
 
 	setup_force_cpu_cap(X86_FEATURE_TSC);
 
+	xen_setup_runstate_info(cpu);
 	xen_setup_timer(cpu);
 	xen_setup_cpu_clockevents();
 }
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index 02f496a8dbaa..53adefda4275 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -96,7 +96,7 @@ ENTRY(xen_sysret32)
 	pushq $__USER32_CS
 	pushq %rcx
 
-	pushq $VGCF_in_syscall
+	pushq $0
 1:	jmp hypercall_iret
 ENDPATCH(xen_sysret32)
 RELOC(xen_sysret32, 1b+1)
@@ -151,7 +151,7 @@ ENTRY(xen_syscall32_target)
 ENTRY(xen_sysenter_target)
 	lea 16(%rsp), %rsp	/* strip %rcx, %r11 */
 	mov $-ENOSYS, %rax
-	pushq $VGCF_in_syscall
+	pushq $0
 	jmp hypercall_iret
 ENDPROC(xen_syscall32_target)
 ENDPROC(xen_sysenter_target)
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 355fa6b99c9c..f9153a300bce 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -25,6 +25,7 @@ extern struct shared_info *HYPERVISOR_shared_info;
 
 void xen_setup_mfn_list_list(void);
 void xen_setup_shared_info(void);
+void xen_build_mfn_list_list(void);
 void xen_setup_machphys_mapping(void);
 pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn);
 void xen_ident_map_ISA(void);
@@ -41,6 +42,7 @@ void __init xen_build_dynamic_phys_to_machine(void);
 
 void xen_init_irq_ops(void);
 void xen_setup_timer(int cpu);
+void xen_setup_runstate_info(int cpu);
 void xen_teardown_timer(int cpu);
 cycle_t xen_clocksource_read(void);
 void xen_setup_cpu_clockevents(void);
diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h
index b7b8fbe47c77..a508f2f73bd7 100644
--- a/arch/xtensa/include/asm/cacheflush.h
+++ b/arch/xtensa/include/asm/cacheflush.h
@@ -101,6 +101,7 @@ static inline void __invalidate_icache_page_alias(unsigned long virt,
 #define flush_cache_vmap(start,end)	flush_cache_all()
 #define flush_cache_vunmap(start,end)	flush_cache_all()
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page*);
 extern void flush_cache_range(struct vm_area_struct*, ulong, ulong);
 extern void flush_cache_page(struct vm_area_struct*, unsigned long, unsigned long);
diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h
index beb3a6bdb61d..cbdf2ffaacff 100644
--- a/arch/xtensa/include/asm/socket.h
+++ b/arch/xtensa/include/asm/socket.h
@@ -71,4 +71,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif	/* _XTENSA_SOCKET_H */
diff --git a/arch/xtensa/include/asm/syscall.h b/arch/xtensa/include/asm/syscall.h
index 05cebf8f62b1..4352dbe1186a 100644
--- a/arch/xtensa/include/asm/syscall.h
+++ b/arch/xtensa/include/asm/syscall.h
@@ -13,8 +13,6 @@ struct sigaction;
 asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*);
 asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*);
 asmlinkage long xtensa_pipe(int __user *);
-asmlinkage long xtensa_mmap2(unsigned long, unsigned long, unsigned long,
-    			     unsigned long, unsigned long, unsigned long);
 asmlinkage long xtensa_ptrace(long, long, long, long);
 asmlinkage long xtensa_sigreturn(struct pt_regs*);
 asmlinkage long xtensa_rt_sigreturn(struct pt_regs*);
diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h
index c092c8fbb2cf..fbf318b3af3e 100644
--- a/arch/xtensa/include/asm/unistd.h
+++ b/arch/xtensa/include/asm/unistd.h
@@ -189,7 +189,7 @@ __SYSCALL( 79, sys_fremovexattr, 2)
 /* File Map / Shared Memory Operations */
 
 #define __NR_mmap2 				 80
-__SYSCALL( 80, xtensa_mmap2, 6)
+__SYSCALL( 80, sys_mmap_pgoff, 6)
 #define __NR_munmap 				 81
 __SYSCALL( 81, sys_munmap, 2)
 #define __NR_mprotect 				 82
@@ -681,8 +681,10 @@ __SYSCALL(304, sys_signalfd, 3)
 __SYSCALL(305, sys_ni_syscall, 0)
 #define __NR_eventfd				306
 __SYSCALL(306, sys_eventfd, 1)
+#define __NR_recvmmsg				307
+__SYSCALL(307, sys_recvmmsg, 5)
 
-#define __NR_syscall_count			307
+#define __NR_syscall_count			308
 
 /*
  * sysxtensa syscall handler
diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c
index ac15ecbdf919..1e67bab775c1 100644
--- a/arch/xtensa/kernel/syscall.c
+++ b/arch/xtensa/kernel/syscall.c
@@ -57,31 +57,6 @@ asmlinkage long xtensa_pipe(int __user *userfds)
 	return error;
 }
 
-
-asmlinkage long xtensa_mmap2(unsigned long addr, unsigned long len,
-   			     unsigned long prot, unsigned long flags,
-			     unsigned long fd, unsigned long pgoff)
-{
-	int error = -EBADF;
-	struct file * file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
 asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg)
 {
 	unsigned long ret;
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index 4c559cf7da2d..e60a1f57022f 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -196,7 +196,7 @@ static const struct file_operations rs_proc_fops = {
 	.release	= single_release,
 };
 
-static struct tty_operations serial_ops = {
+static const struct tty_operations serial_ops = {
 	.open = rs_open,
 	.close = rs_close,
 	.write = rs_write,