diff options
Diffstat (limited to 'arch/x86/kernel/irqinit_32.c')
| -rw-r--r-- | arch/x86/kernel/irqinit_32.c | 206 |
1 files changed, 0 insertions, 206 deletions
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c deleted file mode 100644 index 368b0a8836f9..000000000000 --- a/arch/x86/kernel/irqinit_32.c +++ /dev/null @@ -1,206 +0,0 @@ -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sysdev.h> -#include <linux/bitops.h> -#include <linux/io.h> -#include <linux/delay.h> - -#include <asm/atomic.h> -#include <asm/system.h> -#include <asm/timer.h> -#include <asm/pgtable.h> -#include <asm/desc.h> -#include <asm/apic.h> -#include <asm/setup.h> -#include <asm/i8259.h> -#include <asm/traps.h> - - -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ - -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - outb(0, 0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->ip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { - .handler = math_error_irq, - .name = "fpu", -}; - -void __init init_ISA_irqs(void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); -#endif - init_8259A(0); - - /* - * 16 old-style INTA-cycle interrupts: - */ - for (i = 0; i < NR_IRQS_LEGACY; i++) { - struct irq_desc *desc = irq_to_desc(i); - - desc->status = IRQ_DISABLED; - desc->action = NULL; - desc->depth = 1; - - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ -static struct irqaction irq2 = { - .handler = no_action, - .name = "cascade", -}; - -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -int vector_used_by_percpu_irq(unsigned int vector) -{ - int cpu; - - for_each_online_cpu(cpu) { - if (per_cpu(vector_irq, cpu)[vector] != -1) - return 1; - } - - return 0; -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - /* Execute any quirks before the call gates are initialised: */ - x86_quirk_pre_intr_init(); - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (i != SYSCALL_VECTOR) - set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); - } - - -#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP) - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* IPI for single call function */ - alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, - call_function_single_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); - set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); -#endif - -#ifdef CONFIG_X86_LOCAL_APIC - /* self generated IPI for local APIC timer */ - alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* generic IPI for platform specific use */ - alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); -#endif - -#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL) - /* thermal monitor LVT interrupt */ - alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -#endif - - if (!acpi_ioapic) - setup_irq(2, &irq2); - - /* - * Call quirks after call gates are initialised (usually add in - * the architecture specific gates): - */ - x86_quirk_intr_init(); - - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -} |