diff options
Diffstat (limited to 'arch/sh/boards/mach-se/7724/setup.c')
| -rw-r--r-- | arch/sh/boards/mach-se/7724/setup.c | 55 |
1 files changed, 15 insertions, 40 deletions
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index c31d228fdfc6..527679394a25 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -15,6 +15,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/mfd/sh_mobile_sdhi.h> +#include <linux/mmc/host.h> #include <linux/mtd/physmap.h> #include <linux/delay.h> #include <linux/smc91x.h> @@ -283,31 +284,6 @@ static struct platform_device ceu1_device = { }; /* FSI */ -/* - * FSI-A use external clock which came from ak464x. - * So, we should change parent of fsi - */ -#define FCLKACR 0xa4150008 -static void fsimck_init(struct clk *clk) -{ - u32 status = __raw_readl(clk->enable_reg); - - /* use external clock */ - status &= ~0x000000ff; - status |= 0x00000080; - __raw_writel(status, clk->enable_reg); -} - -static struct clk_ops fsimck_clk_ops = { - .init = fsimck_init, -}; - -static struct clk fsimcka_clk = { - .ops = &fsimck_clk_ops, - .enable_reg = (void __iomem *)FCLKACR, - .rate = 0, /* unknown */ -}; - /* change J20, J21, J22 pin to 1-2 connection to use slave mode */ static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | @@ -343,6 +319,10 @@ static struct platform_device fsi_device = { }, }; +static struct platform_device fsi_ak4642_device = { + .name = "sh_fsi_a_ak4642", +}; + /* KEYSC in SoC (Needs SW33-2 set to ON) */ static struct sh_keysc_info keysc_info = { .mode = SH_KEYSC_MODE_1, @@ -492,6 +472,7 @@ static struct resource sdhi0_cn7_resources[] = { static struct sh_mobile_sdhi_info sh7724_sdhi0_data = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_caps = MMC_CAP_SDIO_IRQ, }; static struct platform_device sdhi0_cn7_device = { @@ -523,6 +504,7 @@ static struct resource sdhi1_cn8_resources[] = { static struct sh_mobile_sdhi_info sh7724_sdhi1_data = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, + .tmio_caps = MMC_CAP_SDIO_IRQ, }; static struct platform_device sdhi1_cn8_device = { @@ -615,6 +597,7 @@ static struct platform_device *ms7724se_devices[] __initdata = { &sh7724_usb0_host_device, &sh7724_usb1_gadget_device, &fsi_device, + &fsi_ak4642_device, &sdhi0_cn7_device, &sdhi1_cn8_device, &irda_device, @@ -852,37 +835,29 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_KEYOUT0, NULL); /* enable FSI */ - gpio_request(GPIO_FN_FSIMCKB, NULL); gpio_request(GPIO_FN_FSIMCKA, NULL); + gpio_request(GPIO_FN_FSIIASD, NULL); gpio_request(GPIO_FN_FSIOASD, NULL); gpio_request(GPIO_FN_FSIIABCK, NULL); gpio_request(GPIO_FN_FSIIALRCK, NULL); gpio_request(GPIO_FN_FSIOABCK, NULL); gpio_request(GPIO_FN_FSIOALRCK, NULL); gpio_request(GPIO_FN_CLKAUDIOAO, NULL); - gpio_request(GPIO_FN_FSIIBSD, NULL); - gpio_request(GPIO_FN_FSIOBSD, NULL); - gpio_request(GPIO_FN_FSIIBBCK, NULL); - gpio_request(GPIO_FN_FSIIBLRCK, NULL); - gpio_request(GPIO_FN_FSIOBBCK, NULL); - gpio_request(GPIO_FN_FSIOBLRCK, NULL); - gpio_request(GPIO_FN_CLKAUDIOBO, NULL); - gpio_request(GPIO_FN_FSIIASD, NULL); /* set SPU2 clock to 83.4 MHz */ clk = clk_get(NULL, "spu_clk"); - if (clk) { + if (!IS_ERR(clk)) { clk_set_rate(clk, clk_round_rate(clk, 83333333)); clk_put(clk); } /* change parent of FSI A */ clk = clk_get(NULL, "fsia_clk"); - if (clk) { - clk_register(&fsimcka_clk); - clk_set_parent(clk, &fsimcka_clk); - clk_set_rate(clk, 11000); - clk_set_rate(&fsimcka_clk, 11000); + if (!IS_ERR(clk)) { + /* 48kHz dummy clock was used to make sure 1/1 divide */ + clk_set_rate(&sh7724_fsimcka_clk, 48000); + clk_set_parent(clk, &sh7724_fsimcka_clk); + clk_set_rate(clk, 48000); clk_put(clk); } |