diff options
Diffstat (limited to 'arch/arm/mach-mx3/pcm043.c')
-rw-r--r-- | arch/arm/mach-mx3/pcm043.c | 259 |
1 files changed, 0 insertions, 259 deletions
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c deleted file mode 100644 index e3aa829be586..000000000000 --- a/arch/arm/mach-mx3/pcm043.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * Copyright (C) 2009 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> - -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/plat-ram.h> -#include <linux/memory.h> -#include <linux/gpio.h> -#include <linux/smc911x.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/i2c/at24.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/imx-uart.h> -#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE -#include <mach/i2c.h> -#endif -#include <mach/iomux-mx35.h> -#include <mach/ipu.h> -#include <mach/mx3fb.h> -#include <mach/mxc_nand.h> - -#include "devices.h" - -static const struct fb_videomode fb_modedb[] = { - { - /* 240x320 @ 60 Hz */ - .name = "Sharp-LQ035Q7", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 185925, - .left_margin = 9, - .right_margin = 16, - .upper_margin = 7, - .lower_margin = 9, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, { - /* 240x320 @ 60 Hz */ - .name = "TX090", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 38255, - .left_margin = 144, - .right_margin = 0, - .upper_margin = 7, - .lower_margin = 40, - .hsync_len = 96, - .vsync_len = 1, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct ipu_platform_data mx3_ipu_data = { - .irq_base = MXC_IPU_IRQ_START, -}; - -static struct mx3fb_platform_data mx3fb_pdata = { - .dma_dev = &mx3_ipu.dev, - .name = "Sharp-LQ035Q7", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -static struct physmap_flash_data pcm043_flash_data = { - .width = 2, -}; - -static struct resource pcm043_flash_resource = { - .start = 0xa0000000, - .end = 0xa1ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pcm043_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &pcm043_flash_data, - }, - .resource = &pcm043_flash_resource, - .num_resources = 1, -}; - -static struct imxuart_platform_data uart_pdata = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE -static struct imxi2c_platform_data pcm043_i2c_1_data = { - .bitrate = 50000, -}; - -static struct at24_platform_data board_eeprom = { - .byte_len = 4096, - .page_size = 32, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info pcm043_i2c_devices[] = { - { - I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ - .platform_data = &board_eeprom, - }, { - I2C_BOARD_INFO("pcf8563", 0x51), - } -}; -#endif - -static struct platform_device *devices[] __initdata = { - &pcm043_flash, - &mxc_fec_device, -}; - -static struct pad_desc pcm043_pads[] = { - /* UART1 */ - MX35_PAD_CTS1__UART1_CTS, - MX35_PAD_RTS1__UART1_RTS, - MX35_PAD_TXD1__UART1_TXD_MUX, - MX35_PAD_RXD1__UART1_RXD_MUX, - /* UART2 */ - MX35_PAD_CTS2__UART2_CTS, - MX35_PAD_RTS2__UART2_RTS, - MX35_PAD_TXD2__UART2_TXD_MUX, - MX35_PAD_RXD2__UART2_RXD_MUX, - /* FEC */ - MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, - MX35_PAD_FEC_RX_DV__FEC_RX_DV, - MX35_PAD_FEC_COL__FEC_COL, - MX35_PAD_FEC_RDATA0__FEC_RDATA_0, - MX35_PAD_FEC_TDATA0__FEC_TDATA_0, - MX35_PAD_FEC_TX_EN__FEC_TX_EN, - MX35_PAD_FEC_MDC__FEC_MDC, - MX35_PAD_FEC_MDIO__FEC_MDIO, - MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, - MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, - MX35_PAD_FEC_CRS__FEC_CRS, - MX35_PAD_FEC_RDATA1__FEC_RDATA_1, - MX35_PAD_FEC_TDATA1__FEC_TDATA_1, - MX35_PAD_FEC_RDATA2__FEC_RDATA_2, - MX35_PAD_FEC_TDATA2__FEC_TDATA_2, - MX35_PAD_FEC_RDATA3__FEC_RDATA_3, - MX35_PAD_FEC_TDATA3__FEC_TDATA_3, - /* I2C1 */ - MX35_PAD_I2C1_CLK__I2C1_SCL, - MX35_PAD_I2C1_DAT__I2C1_SDA, - /* Display */ - MX35_PAD_LD0__IPU_DISPB_DAT_0, - MX35_PAD_LD1__IPU_DISPB_DAT_1, - MX35_PAD_LD2__IPU_DISPB_DAT_2, - MX35_PAD_LD3__IPU_DISPB_DAT_3, - MX35_PAD_LD4__IPU_DISPB_DAT_4, - MX35_PAD_LD5__IPU_DISPB_DAT_5, - MX35_PAD_LD6__IPU_DISPB_DAT_6, - MX35_PAD_LD7__IPU_DISPB_DAT_7, - MX35_PAD_LD8__IPU_DISPB_DAT_8, - MX35_PAD_LD9__IPU_DISPB_DAT_9, - MX35_PAD_LD10__IPU_DISPB_DAT_10, - MX35_PAD_LD11__IPU_DISPB_DAT_11, - MX35_PAD_LD12__IPU_DISPB_DAT_12, - MX35_PAD_LD13__IPU_DISPB_DAT_13, - MX35_PAD_LD14__IPU_DISPB_DAT_14, - MX35_PAD_LD15__IPU_DISPB_DAT_15, - MX35_PAD_LD16__IPU_DISPB_DAT_16, - MX35_PAD_LD17__IPU_DISPB_DAT_17, - MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, - MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, - MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, - MX35_PAD_CONTRAST__IPU_DISPB_CONTR, - MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, - MX35_PAD_D3_REV__IPU_DISPB_D3_REV, - MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, - /* gpio */ - MX35_PAD_ATA_CS0__GPIO2_6, -}; - -static struct mxc_nand_platform_data pcm037_nand_board_info = { - .width = 1, - .hw_ecc = 1, -}; - -/* - * Board specific initialization. - */ -static void __init mxc_board_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info); - - mxc_register_device(&mxc_uart_device1, &uart_pdata); - -#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE - i2c_register_board_info(0, pcm043_i2c_devices, - ARRAY_SIZE(pcm043_i2c_devices)); - - mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data); -#endif - - mxc_register_device(&mx3_ipu, &mx3_ipu_data); - mxc_register_device(&mx3_fb, &mx3fb_pdata); -} - -static void __init pcm043_timer_init(void) -{ - mx35_clocks_init(); -} - -struct sys_timer pcm043_timer = { - .init = pcm043_timer_init, -}; - -MACHINE_START(PCM043, "Phytec Phycore pcm043") - /* Maintainer: Pengutronix */ - .phys_io = AIPS1_BASE_ADDR, - .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, - .map_io = mx35_map_io, - .init_irq = mx35_init_irq, - .init_machine = mxc_board_init, - .timer = &pcm043_timer, -MACHINE_END - |