1334 files changed, 39372 insertions, 15093 deletions

diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index b8e86460046e..b462bb149543 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -316,12 +316,10 @@ reduce current DMA mapping usage or delay and try again later).
 	pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
 		int nents, int direction)
 
-Maps a scatter gather list from the block layer.
-
 Returns: the number of physical segments mapped (this may be shorter
-than <nents> passed in if the block layer determines that some
-elements of the scatter/gather list are physically adjacent and thus
-may be mapped with a single entry).
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
 
 Please note that the sg cannot be mapped again if it has been mapped once.
 The mapping process is allowed to destroy information in the sg.
diff --git a/Documentation/arm/mem_alignment b/Documentation/arm/mem_alignment
index d145ccca169a..c7c7a114c78c 100644
--- a/Documentation/arm/mem_alignment
+++ b/Documentation/arm/mem_alignment
@@ -24,7 +24,7 @@ real bad - it changes the behaviour of all unaligned instructions in user
 space, and might cause programs to fail unexpectedly.
 
 To change the alignment trap behavior, simply echo a number into
-/proc/sys/debug/alignment.  The number is made up from various bits:
+/proc/cpu/alignment.  The number is made up from various bits:
 
 bit		behavior when set
 ---		-----------------
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index 6c442d8426b5..4f3f3840320e 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -23,6 +23,7 @@ Contents:
 1.3 sparc64
 1.4 ppc
 1.5 SuperH
+1.6 Blackfin
 
 2. "Policy" / "Governor"?
 2.1 Policy
@@ -97,6 +98,17 @@ The following SuperH processors are supported by cpufreq:
 SH-3
 SH-4
 
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
 
 2. "Policy" / "Governor" ?
 ==========================
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index 4340cc825796..67310fbbb7df 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -28,10 +28,7 @@ Manish Singh  <manish.singh@oracle.com>
 Caveats
 =======
 Features which OCFS2 does not support yet:
-	- extended attributes
 	- quotas
-	- cluster aware flock
-	- cluster aware lockf
 	- Directory change notification (F_NOTIFY)
 	- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
 	- POSIX ACLs
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index bcceb99b81dd..bb1b0dd3bfcb 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -44,6 +44,7 @@ Table of Contents
   2.14	/proc/<pid>/io - Display the IO accounting fields
   2.15	/proc/<pid>/coredump_filter - Core dump filtering settings
   2.16	/proc/<pid>/mountinfo - Information about mounts
+  2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
 
 ------------------------------------------------------------------------------
 Preface
@@ -2483,4 +2484,30 @@ For more information on mount propagation see:
 
   Documentation/filesystems/sharedsubtree.txt
 
+2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for  max_user_watches  is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
+
 ------------------------------------------------------------------------------
+
diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
index 62fe9b1e0890..a8273d5fad20 100644
--- a/Documentation/filesystems/ramfs-rootfs-initramfs.txt
+++ b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
@@ -130,12 +130,12 @@ The 2.6 kernel build process always creates a gzipped cpio format initramfs
 archive and links it into the resulting kernel binary.  By default, this
 archive is empty (consuming 134 bytes on x86).
 
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary.  This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary.  This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
 
   dir /dev 755 0 0
   nod /dev/console 644 0 0 c 5 1
diff --git a/Documentation/input/input-programming.txt b/Documentation/input/input-programming.txt
index 81905e81585e..7f8b9d97bc47 100644
--- a/Documentation/input/input-programming.txt
+++ b/Documentation/input/input-programming.txt
@@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
 
 static struct input_dev *button_dev;
 
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
 {
 	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
 	input_sync(button_dev);
+	return IRQ_HANDLED;
 }
 
 static int __init button_init(void)
diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt
index f4f8b1c6c8ba..23045b8b50f0 100644
--- a/Documentation/local_ops.txt
+++ b/Documentation/local_ops.txt
@@ -149,7 +149,7 @@ static void do_test_timer(unsigned long data)
 	int cpu;
 
 	/* Increment the counters */
-	on_each_cpu(test_each, NULL, 0, 1);
+	on_each_cpu(test_each, NULL, 1);
 	/* Read all the counters */
 	printk("Counters read from CPU %d\n", smp_processor_id());
 	for_each_online_cpu(cpu) {
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index e0e54a27fc10..3cd2ad958176 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1072,10 +1072,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  ref		Reference board
 	  dell-m4-1	Dell desktops
 	  dell-m4-2	Dell desktops
+	  dell-m4-3	Dell desktops
 
 	STAC92HD73*
 	  ref		Reference board
-	  dell-m6	Dell desktops
+	  dell-m6-amic	Dell desktops/laptops with analog mics
+	  dell-m6-dmic	Dell desktops/laptops with digital mics
+	  dell-m6	Dell desktops/laptops with both type of mics
 
 	STAC9872
 	  vaio		Setup for VAIO FE550G/SZ110
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 8bae2f018d34..0f5122eb282b 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -215,7 +215,7 @@ So for example arch/.../mach-*/board-*.c files might have code like:
 	/* if your mach-* infrastructure doesn't support kernels that can
 	 * run on multiple boards, pdata wouldn't benefit from "__init".
 	 */
-	static struct mysoc_spi_data __init pdata = { ... };
+	static struct mysoc_spi_data __initdata pdata = { ... };
 
 	static __init board_init(void)
 	{
diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/tracers/mmiotrace.txt
index 5bbbe2096223..cde23b4a12a1 100644
--- a/Documentation/tracers/mmiotrace.txt
+++ b/Documentation/tracers/mmiotrace.txt
@@ -37,7 +37,7 @@ $ echo mmiotrace > /debug/tracing/current_tracer
 $ cat /debug/tracing/trace_pipe > mydump.txt &
 Start X or whatever.
 $ echo "X is up" > /debug/tracing/trace_marker
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
 Check for lost events.
 
 
@@ -66,7 +66,7 @@ which action. It is recommended to place descriptive markers about what you
 do.
 
 Shut down mmiotrace (requires root privileges):
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
 The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
 pressing ctrl+c.
 
@@ -81,7 +81,9 @@ are:
 $ cat /debug/tracing/trace_entries
 gives you a number. Approximately double this number and write it back, for
 instance:
+$ echo 0 > /debug/tracing/tracing_enabled
 $ echo 128000 > /debug/tracing/trace_entries
+$ echo 1 > /debug/tracing/tracing_enabled
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also
diff --git a/MAINTAINERS b/MAINTAINERS
index 618c1ef4a397..351cf7906c37 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -779,6 +779,7 @@ ATM
 P:	Chas Williams
 M:	chas@cmf.nrl.navy.mil
 L:	linux-atm-general@lists.sourceforge.net (subscribers-only)
+L:	netdev@vger.kernel.org
 W:	http://linux-atm.sourceforge.net
 S:	Maintained
 
@@ -1526,10 +1527,10 @@ W:	http://ebtables.sourceforge.net/
 S:	Maintained
 
 ECRYPT FILE SYSTEM
-P:	Mike Halcrow, Phillip Hellewell
-M:	mhalcrow@us.ibm.com, phillip@hellewell.homeip.net
-L:	ecryptfs-devel@lists.sourceforge.net
-W:	http://ecryptfs.sourceforge.net/
+P:	Tyler Hicks, Dustin Kirkland
+M:	tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
+L:	ecryptfs-devel@lists.launchpad.net
+W:	https://launchpad.net/ecryptfs
 S:	Supported
 
 EDAC-CORE
@@ -1759,6 +1760,13 @@ L:	linuxppc-dev@ozlabs.org
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
+FREESCALE IMX / MXC FRAMEBUFFER DRIVER
+P:	Sascha Hauer
+M:	kernel@pengutronix.de
+L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S:	Maintained
+
 FREESCALE SOC FS_ENET DRIVER
 P:	Pantelis Antoniou
 M:	pantelis.antoniou@gmail.com
@@ -3758,6 +3766,15 @@ M:	drzeus-sdhci@drzeus.cx
 L:	sdhci-devel@list.drzeus.cx
 S:	Maintained
 
+SECURITY SUBSYSTEM
+F:	security/
+P:	James Morris
+M:	jmorris@namei.org
+L:	linux-kernel@vger.kernel.org
+L:	linux-security-module@vger.kernel.org (suggested Cc:)
+T:	git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+S:	Supported
+
 SECURITY CONTACT
 P:	Security Officers
 M:	security@kernel.org
@@ -4235,7 +4252,7 @@ M:	dedekind@infradead.org
 P:	Adrian Hunter
 M:	ext-adrian.hunter@nokia.com
 L:	linux-mtd@lists.infradead.org
-T:	git git://git.infradead.org/~dedekind/ubifs-2.6.git
+T:	git git://git.infradead.org/ubifs-2.6.git
 W:	http://www.linux-mtd.infradead.org/doc/ubifs.html
 S:	Maintained
 
@@ -4289,7 +4306,7 @@ P:	Artem Bityutskiy
 M:	dedekind@infradead.org
 W:	http://www.linux-mtd.infradead.org/
 L:	linux-mtd@lists.infradead.org
-T:	git git://git.infradead.org/~dedekind/ubi-2.6.git
+T:	git git://git.infradead.org/ubi-2.6.git
 S:	Maintained
 
 USB ACM DRIVER
diff --git a/Makefile b/Makefile
index 7b1f2384094f..6c2f51b70454 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc6
-NAME = Killer Bat of Doom
+EXTRAVERSION = -rc8
+NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
diff --git a/arch/Kconfig b/arch/Kconfig
index 8977d99987cb..471e72dbaf8b 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -79,8 +79,6 @@ config HAVE_KRETPROBES
 #	task_pt_regs()		in asm/processor.h or asm/ptrace.h
 #	arch_has_single_step()	if there is hardware single-step support
 #	arch_has_block_step()	if there is hardware block-step support
-#	arch_ptrace()		and not #define __ARCH_SYS_PTRACE
-#	compat_arch_ptrace()	and #define __ARCH_WANT_COMPAT_SYS_PTRACE
 #	asm/syscall.h		supplying asm-generic/syscall.h interface
 #	linux/regset.h		user_regset interfaces
 #	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 5cf45fc51343..ff8cb638472e 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -338,7 +338,7 @@ common_swizzle(struct pci_dev *dev, u8 *pinp)
 	return PCI_SLOT(dev->devfn);
 }
 
-void __devinit
+void
 pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 			 struct resource *res)
 {
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index e657c45d91d2..cf7da10097bb 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -121,7 +121,7 @@ wait_boot_cpu_to_stop(int cpuid)
 /*
  * Where secondaries begin a life of C.
  */
-void __init
+void __cpuinit
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
@@ -198,7 +198,7 @@ wait_for_txrdy (unsigned long cpumask)
  * Send a message to a secondary's console.  "START" is one such
  * interesting message.  ;-)
  */
-static void __init
+static void __cpuinit
 send_secondary_console_msg(char *str, int cpuid)
 {
 	struct percpu_struct *cpu;
@@ -289,7 +289,7 @@ recv_secondary_console_msg(void)
 /*
  * Convince the console to have a secondary cpu begin execution.
  */
-static int __init
+static int __cpuinit
 secondary_cpu_start(int cpuid, struct task_struct *idle)
 {
 	struct percpu_struct *cpu;
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index c778779007fc..cefc5a355ef9 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -31,7 +31,7 @@
 
 static int opDEC_fix;
 
-static void __init
+static void __cpuinit
 opDEC_check(void)
 {
 	__asm__ __volatile__ (
@@ -1072,7 +1072,7 @@ give_sigbus:
 	return;
 }
 
-void __init
+void __cpuinit
 trap_init(void)
 {
 	/* Tell PAL-code what global pointer we want in the kernel.  */
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9722f8bb506c..d6ebe39934b5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -156,7 +156,6 @@ config ARCH_MTD_XIP
 	bool
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
-	bool
 	def_bool y
 
 if OPROFILE
@@ -201,6 +200,7 @@ choice
 
 config ARCH_AAEC2000
 	bool "Agilent AAEC-2000 based"
+	select CPU_ARM920T
 	select ARM_AMBA
 	select HAVE_CLK
 	help
@@ -210,6 +210,7 @@ config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
 	select HAVE_CLK
+	select COMMON_CLKDEV
 	select ICST525
 	help
 	  Support for ARM's Integrator platform.
@@ -218,6 +219,7 @@ config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARM_AMBA
 	select HAVE_CLK
+	select COMMON_CLKDEV
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -229,6 +231,7 @@ config ARCH_VERSATILE
 	select ARM_AMBA
 	select ARM_VIC
 	select HAVE_CLK
+	select COMMON_CLKDEV
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -243,22 +246,15 @@ config ARCH_AT91
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
 
-config ARCH_CLPS7500
-	bool "Cirrus CL-PS7500FE"
-	select TIMER_ACORN
-	select ISA
-	select NO_IOPORT
-	select ARCH_SPARSEMEM_ENABLE
-	help
-	  Support for the Cirrus Logic PS7500FE system-on-a-chip.
-
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x-based"
+	select CPU_ARM720T
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
 config ARCH_EBSA110
 	bool "EBSA-110"
+	select CPU_SA110
 	select ISA
 	select NO_IOPORT
 	help
@@ -269,16 +265,19 @@ config ARCH_EBSA110
 
 config ARCH_EP93XX
 	bool "EP93xx-based"
+	select CPU_ARM920T
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
+	select CPU_SA110
 	select FOOTBRIDGE
 	help
 	  Support for systems based on the DC21285 companion chip
@@ -286,18 +285,23 @@ config ARCH_FOOTBRIDGE
 
 config ARCH_NETX
 	bool "Hilscher NetX based"
+	select CPU_ARM926T
 	select ARM_VIC
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_TIME
 	help
 	  This enables support for systems based on the Hilscher NetX Soc
 
 config ARCH_H720X
 	bool "Hynix HMS720x-based"
+	select CPU_ARM720T
 	select ISA_DMA_API
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
 config ARCH_IMX
 	bool "IMX"
+	select CPU_ARM920T
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -307,6 +311,7 @@ config ARCH_IMX
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
+	select CPU_XSC3
 	select PLAT_IOP
 	select PCI
 	select ARCH_SUPPORTS_MSI
@@ -317,6 +322,7 @@ config ARCH_IOP13XX
 config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
+	select CPU_XSCALE
 	select PLAT_IOP
 	select PCI
 	select GENERIC_GPIO
@@ -328,6 +334,7 @@ config ARCH_IOP32X
 config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
+	select CPU_XSCALE
 	select PLAT_IOP
 	select PCI
 	select GENERIC_GPIO
@@ -338,6 +345,7 @@ config ARCH_IOP33X
 config ARCH_IXP23XX
  	bool "IXP23XX-based"
 	depends on MMU
+	select CPU_XSC3
  	select PCI
 	help
 	  Support for Intel's IXP23xx (XScale) family of processors.
@@ -345,6 +353,7 @@ config ARCH_IXP23XX
 config ARCH_IXP2000
 	bool "IXP2400/2800-based"
 	depends on MMU
+	select CPU_XSCALE
 	select PCI
 	help
 	  Support for Intel's IXP2400/2800 (XScale) family of processors.
@@ -352,6 +361,7 @@ config ARCH_IXP2000
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
+	select CPU_XSCALE
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -361,6 +371,7 @@ config ARCH_IXP4XX
 
 config ARCH_L7200
 	bool "LinkUp-L7200"
+	select CPU_ARM720T
 	select FIQ
 	help
 	  Say Y here if you intend to run this kernel on a LinkUp Systems
@@ -374,7 +385,9 @@ config ARCH_L7200
 
 config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
+	select CPU_FEROCEON
 	select PCI
+	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -384,13 +397,16 @@ config ARCH_KIRKWOOD
 
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
+	select CPU_ARM922T
 	select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
 
 config ARCH_NS9XXX
 	bool "NetSilicon NS9xxx"
+	select CPU_ARM926T
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -403,6 +419,7 @@ config ARCH_NS9XXX
 
 config ARCH_LOKI
 	bool "Marvell Loki (88RC8480)"
+	select CPU_FEROCEON
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -411,7 +428,9 @@ config ARCH_LOKI
 
 config ARCH_MV78XX0
 	bool "Marvell MV78xx0"
+	select CPU_FEROCEON
 	select PCI
+	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -432,6 +451,7 @@ config ARCH_MXC
 config ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU
+	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
 	select GENERIC_TIME
@@ -444,6 +464,7 @@ config ARCH_ORION5X
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
+	select CPU_ARM926T
 	select HAVE_CLK
 	help
 	  This enables support for Philips PNX4008 mobile platform.
@@ -454,6 +475,7 @@ config ARCH_PXA
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -477,6 +499,7 @@ config ARCH_RPC
 
 config ARCH_SA1100
 	bool "SA1100-based"
+	select CPU_SA1100
 	select ISA
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MTD_XIP
@@ -498,8 +521,16 @@ config ARCH_S3C2410
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
 	  the Samsung SMDK2410 development board (and derivatives).
 
+config ARCH_S3C64XX
+	bool "Samsung S3C64XX"
+	select GENERIC_GPIO
+	select HAVE_CLK
+	help
+	  Samsung S3C64XX series based systems
+
 config ARCH_SHARK
 	bool "Shark"
+	select CPU_SA110
 	select ISA
 	select ISA_DMA
 	select ZONE_DMA
@@ -510,6 +541,7 @@ config ARCH_SHARK
 
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
+	select CPU_ARM922T
 	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
 	help
@@ -520,6 +552,7 @@ config ARCH_LH7A40X
 
 config ARCH_DAVINCI
 	bool "TI DaVinci"
+	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
@@ -541,6 +574,7 @@ config ARCH_OMAP
 
 config ARCH_MSM
 	bool "Qualcomm MSM"
+	select CPU_V6
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -549,6 +583,13 @@ config ARCH_MSM
 	  interface to the ARM9 modem processor which runs the baseband stack
 	  and controls some vital subsystems (clock and power control, etc).
 
+config ARCH_W90X900
+	bool "Nuvoton W90X900 CPU"
+	select CPU_ARM926T
+	help
+		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+		can login www.mcuos.com or www.nuvoton.com to know more.
+
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -590,6 +631,7 @@ source "arch/arm/mach-orion5x/Kconfig"
 source "arch/arm/mach-kirkwood/Kconfig"
 
 source "arch/arm/plat-s3c24xx/Kconfig"
+source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
 
 if ARCH_S3C2410
@@ -601,6 +643,11 @@ source "arch/arm/mach-s3c2442/Kconfig"
 source "arch/arm/mach-s3c2443/Kconfig"
 endif
 
+if ARCH_S3C64XX
+source "arch/arm/mach-s3c6400/Kconfig"
+source "arch/arm/mach-s3c6410/Kconfig"
+endif
+
 source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-imx/Kconfig"
@@ -627,6 +674,8 @@ source "arch/arm/mach-ks8695/Kconfig"
 
 source "arch/arm/mach-msm/Kconfig"
 
+source "arch/arm/mach-w90x900/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
@@ -781,7 +830,7 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
-	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
 	default y
 	help
 	  Enable support for local timers on SMP platforms, rather then the
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index bd6e28115ebb..24e0f0187697 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -76,6 +76,7 @@ tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
 tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
 tune-$(CONFIG_CPU_XSC3)		:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+tune-$(CONFIG_CPU_FEROCEON)	:=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
 tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
 
 ifeq ($(CONFIG_AEABI),y)
@@ -96,7 +97,6 @@ textofs-y	:= 0x00008000
 
  machine-$(CONFIG_ARCH_RPC)	   := rpc
  machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
- machine-$(CONFIG_ARCH_CLPS7500)   := clps7500
  machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
  machine-$(CONFIG_ARCH_SHARK)	   := shark
  machine-$(CONFIG_ARCH_SA1100)	   := sa1100
@@ -121,7 +121,10 @@ endif
  machine-$(CONFIG_ARCH_OMAP3)	   := omap2
     plat-$(CONFIG_ARCH_OMAP)	   := omap
  machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+ machine-$(CONFIG_ARCH_S3C24A0)	   := s3c24a0
     plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx s3c
+ machine-$(CONFIG_ARCH_S3C64XX)	   := s3c6400 s3c6410
+    plat-$(CONFIG_PLAT_S3C64XX)	   := s3c64xx s3c
  machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
  machine-$(CONFIG_ARCH_VERSATILE)  := versatile
  machine-$(CONFIG_ARCH_IMX)	   := imx
@@ -139,11 +142,13 @@ endif
     plat-$(CONFIG_ARCH_MXC)	   := mxc
  machine-$(CONFIG_ARCH_MX2)	   := mx2
  machine-$(CONFIG_ARCH_MX3)	   := mx3
+ machine-$(CONFIG_ARCH_MX1)	   := mx1
  machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
     plat-$(CONFIG_PLAT_ORION)	   := orion
  machine-$(CONFIG_ARCH_MSM)	   := msm
  machine-$(CONFIG_ARCH_LOKI)       := loki
  machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
+ machine-$(CONFIG_ARCH_W90X900)    := w90x900
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index c47f2a3f8f8f..fbe5eef1f6c9 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -23,10 +23,6 @@ ifeq ($(CONFIG_ARCH_L7200),y)
 OBJS		+= head-l7200.o
 endif
 
-ifeq ($(CONFIG_ARCH_CLPS7500),y)
-HEAD		= head-clps7500.o
-endif
-
 ifeq ($(CONFIG_ARCH_P720T),y)
 # Borrow this code from SA1100
 OBJS		+= head-sa1100.o
diff --git a/arch/arm/boot/compressed/head-clps7500.S b/arch/arm/boot/compressed/head-clps7500.S
deleted file mode 100644
index 4f3c78ac30a0..000000000000
--- a/arch/arm/boot/compressed/head-clps7500.S
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/head-clps7500.S
- *
- * Copyright (C) 1999, 2000, 2001 Nexus Electronics Ltd
- */
-
-
-		/* There are three different ways the kernel can be
-		   booted on a 7500 system: from Angel (loaded in RAM), from
-		   16-bit ROM or from 32-bit Flash.  Luckily, a single kernel
-		   image does for them all. */
-		/* This branch is taken if the CPU memory width matches the
-		   actual device in use.  The default at power on is 16 bits
-		   so we must be prepared for a mismatch. */
-		.section ".start", "ax"
-2:
-		b	1f
-		.word	0xffff
-		.word	0xb632		@ mov r11, #0x03200000
-		.word	0xe3a0
-		.word	0x0000		@ mov r0, #0
-		.word	0xe3a0
-		.word	0x0080		@ strb r0, [r11, #0x80]
-		.word	0xe5cb
-		.word	0xf000		@ mov pc, #0
-		.word	0xe3a0
-1:
-		adr	r1, 2b
-		teq	r1, #0
-		bne	.Langel
-		/* This is a direct-from-ROM boot.  Copy the kernel into 
-		   RAM and run it there. */
-		mov	r0, #0x30
-		mcr	p15, 0, r0, c1, c0, 0
-		mov	r0, #0x13
-		msr	cpsr_cxsf, r0
-		mov	r12, #0x03000000	@ point to LEDs
-		orr	r12, r12, #0x00020000
-		orr	r12, r12, #0xba00
-		mov	r0, #0x5500
-		str	r0, [r12]
-		mov	r0, #0x10000000
-		orr	r0, r0, #0x8000
-		mov	r4, r0
-		ldr	r2, =_end
-2:
-		ldr	r3, [r1], #4
-		str	r3, [r0], #4
-		teq	r0, r2
-		bne	2b
-		mov	r0, #0xff00
-		str	r0, [r12]
-1:	
-		mov	r12, #0x03000000	@ point to LEDs
-		orr	r12, r12, #0x00020000
-		orr	r12, r12, #0xba00
-		mov	r0, #0xfe00
-		str	r0, [r12]
-
-		adr	lr, 1f
-		mov	r0, #0
-		mov	r1, #14		/* MACH_TYPE_CLPS7500 */
-		mov	pc, lr
-.Langel:
-#ifdef CONFIG_ANGELBOOT
-		/* Call Angel to switch into SVC mode. */
-		mov	r0, #0x17
-		swi	0x123456
-#endif
-		/* Ensure all interrupts are off and MMU disabled */
-		mrs	r0, cpsr
-		orr	r0, r0, #0xc0
-		msr	cpsr_cxsf, r0
-
-		adr	lr, 1b
-		orr	lr, lr, #0x10000000
-		mov	r0, #0x30		@ MMU off
-		mcr	p15, 0, r0, c1, c0, 0
-		mov	r0, r0
-	 	mov	pc, lr
-
-		.ltorg
-
-1:
-/* And the rest */
-#include "head.S"
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 606650964eff..77d614232d81 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -723,6 +723,9 @@ __armv7_mmu_cache_off:
 		bl	__armv7_mmu_cache_flush
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
+		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
+		mcr	p15, 0, r0, c7, c10, 4	@ DSB
+		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mov	pc, r12
 
 __arm6_mmu_cache_off:
@@ -784,12 +787,13 @@ __armv6_mmu_cache_flush:
 __armv7_mmu_cache_flush:
 		mrc	p15, 0, r10, c0, c1, 5	@ read ID_MMFR1
 		tst	r10, #0xf << 16		@ hierarchical cache (ARMv7)
-		beq	hierarchical
 		mov	r10, #0
+		beq	hierarchical
 		mcr	p15, 0, r10, c7, c14, 0	@ clean+invalidate D
 		b	iflush
 hierarchical:
-		stmfd	sp!, {r0-r5, r7, r9-r11}
+		mcr	p15, 0, r10, c7, c10, 5	@ DMB
+		stmfd	sp!, {r0-r5, r7, r9, r11}
 		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
 		ands	r3, r0, #0x7000000	@ extract loc from clidr
 		mov	r3, r3, lsr #23		@ left align loc bit field
@@ -826,12 +830,14 @@ skip:
 		cmp	r3, r10
 		bgt	loop1
 finished:
+		ldmfd	sp!, {r0-r5, r7, r9, r11}
 		mov	r10, #0			@ swith back to cache level 0
 		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
-		ldmfd	sp!, {r0-r5, r7, r9-r11}
 iflush:
+		mcr	p15, 0, r10, c7, c10, 4	@ DSB
 		mcr	p15, 0, r10, c7, c5, 0	@ invalidate I+BTB
-		mcr	p15, 0, r10, c7, c10, 4	@ drain WB
+		mcr	p15, 0, r10, c7, c10, 4	@ DSB
+		mcr	p15, 0, r10, c7, c5, 4	@ ISB
 		mov	pc, lr
 
 __armv5tej_mmu_cache_flush:
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 65ce8fff29db..3fc08413fff0 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -86,6 +86,8 @@ static void putstr(const char *ptr)
 
 #define __ptr_t void *
 
+#define memzero(s,n) __memzero(s,n)
+
 /*
  * Optimised C version of memzero for the ARM.
  */
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 86b5e6982660..a2cd9beaf37d 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -33,3 +33,6 @@ config SHARPSL_PM
 
 config SHARP_SCOOP
 	bool
+
+config COMMON_CLKDEV
+	bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 325e4b6a6afb..7cb7961d81cb 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
 obj-$(CONFIG_ARCH_IXP2000)	+= uengine.o
 obj-$(CONFIG_ARCH_IXP23XX)	+= uengine.o
 obj-$(CONFIG_PCI_HOST_ITE8152)  += it8152.o
+obj-$(CONFIG_COMMON_CLKDEV)	+= clkdev.o
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
new file mode 100644
index 000000000000..17a17b49a45b
--- /dev/null
+++ b/arch/arm/common/clkdev.c
@@ -0,0 +1,128 @@
+/*
+ *  arch/arm/common/clkdev.c
+ *
+ *  Copyright (C) 2008 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Helper for the clk API to assist looking up a struct clk.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/mutex.h>
+
+#include <asm/clkdev.h>
+#include <mach/clkdev.h>
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+static struct clk *clk_find(const char *dev_id, const char *con_id)
+{
+	struct clk_lookup *p;
+	struct clk *clk = NULL;
+	int match, best = 0;
+
+	list_for_each_entry(p, &clocks, node) {
+		if ((p->dev_id && !dev_id) || (p->con_id && !con_id))
+			continue;
+		match = 0;
+		if (p->dev_id)
+			match += 2 * (strcmp(p->dev_id, dev_id) == 0);
+		if (p->con_id)
+			match += 1 * (strcmp(p->con_id, con_id) == 0);
+		if (match == 0)
+			continue;
+
+		if (match > best) {
+			clk = p->clk;
+			best = match;
+		}
+	}
+	return clk;
+}
+
+struct clk *clk_get(struct device *dev, const char *con_id)
+{
+	const char *dev_id = dev ? dev_name(dev) : NULL;
+	struct clk *clk;
+
+	mutex_lock(&clocks_mutex);
+	clk = clk_find(dev_id, con_id);
+	if (clk && !__clk_get(clk))
+		clk = NULL;
+	mutex_unlock(&clocks_mutex);
+
+	return clk ? clk : ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+	__clk_put(clk);
+}
+EXPORT_SYMBOL(clk_put);
+
+void clkdev_add(struct clk_lookup *cl)
+{
+	mutex_lock(&clocks_mutex);
+	list_add_tail(&cl->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clkdev_add);
+
+#define MAX_DEV_ID	20
+#define MAX_CON_ID	16
+
+struct clk_lookup_alloc {
+	struct clk_lookup cl;
+	char	dev_id[MAX_DEV_ID];
+	char	con_id[MAX_CON_ID];
+};
+
+struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
+	const char *dev_fmt, ...)
+{
+	struct clk_lookup_alloc *cla;
+
+	cla = kzalloc(sizeof(*cla), GFP_KERNEL);
+	if (!cla)
+		return NULL;
+
+	cla->cl.clk = clk;
+	if (con_id) {
+		strlcpy(cla->con_id, con_id, sizeof(cla->con_id));
+		cla->cl.con_id = cla->con_id;
+	}
+
+	if (dev_fmt) {
+		va_list ap;
+
+		va_start(ap, dev_fmt);
+		vscnprintf(cla->dev_id, sizeof(cla->dev_id), dev_fmt, ap);
+		cla->cl.dev_id = cla->dev_id;
+		va_end(ap);
+	}
+
+	return &cla->cl;
+}
+EXPORT_SYMBOL(clkdev_alloc);
+
+/*
+ * clkdev_drop - remove a clock dynamically allocated
+ */
+void clkdev_drop(struct clk_lookup *cl)
+{
+	mutex_lock(&clocks_mutex);
+	list_del(&cl->node);
+	mutex_unlock(&clocks_mutex);
+	kfree(cl);
+}
+EXPORT_SYMBOL(clkdev_drop);
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 47ccec95f3e8..ef12794c3c68 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -630,7 +630,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 		return -ENOMEM;
 
 	sachip->clk = clk_get(me, "SA1111_CLK");
-	if (!sachip->clk) {
+	if (IS_ERR(sachip->clk)) {
 		ret = PTR_ERR(sachip->clk);
 		goto err_free;
 	}
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index f1e4b8f60cab..ecf0bfbab107 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -69,12 +69,12 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 	/*
 	 * Make sure we clear all existing interrupts
 	 */
-	writel(0, base + VIC_VECT_ADDR);
+	writel(0, base + VIC_PL190_VECT_ADDR);
 	for (i = 0; i < 19; i++) {
 		unsigned int value;
 
-		value = readl(base + VIC_VECT_ADDR);
-		writel(value, base + VIC_VECT_ADDR);
+		value = readl(base + VIC_PL190_VECT_ADDR);
+		writel(value, base + VIC_PL190_VECT_ADDR);
 	}
 
 	for (i = 0; i < 16; i++) {
@@ -82,7 +82,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		writel(VIC_VECT_CNTL_ENABLE | i, reg);
 	}
 
-	writel(32, base + VIC_DEF_VECT_ADDR);
+	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 
 	for (i = 0; i < 32; i++) {
 		unsigned int irq = irq_start + i;
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index f3af0b593eb0..98765438048d 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -179,7 +179,7 @@ CONFIG_MACH_HUSKY=y
 # CONFIG_MACH_AKITA is not set
 # CONFIG_MACH_SPITZ is not set
 # CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
 # CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
 # CONFIG_TRIZEPS_PXA is not set
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index e3357ba10f1f..ab8b1e0d0dac 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,11 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Sun Jun 22 15:51:25 2008
+# Linux kernel version: 2.6.28-rc7
+# Thu Dec  4 15:27:39 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
@@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -49,14 +48,17 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
+# CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -73,9 +75,12 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
@@ -85,8 +90,7 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -97,12 +101,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -117,6 +122,7 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -128,7 +134,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
@@ -158,7 +163,7 @@ CONFIG_ARCH_KIRKWOOD=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
 
 #
 # Marvell Kirkwood Implementations
@@ -199,6 +204,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
 
 #
 # Bus support
@@ -217,25 +223,30 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -248,6 +259,11 @@ CONFIG_CMDLINE=""
 # CONFIG_KEXEC is not set
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
@@ -260,6 +276,8 @@ CONFIG_CMDLINE=""
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -268,10 +286,6 @@ CONFIG_BINFMT_ELF=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -322,6 +336,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_TAG_DSA is not set
+CONFIG_NET_DSA_TAG_EDSA=y
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_MV88E6XXX=y
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -343,12 +366,12 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -365,6 +388,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -453,7 +478,7 @@ CONFIG_M25PXX_USE_FAST_READ=y
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
@@ -561,6 +586,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -619,7 +645,6 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
 # CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -627,11 +652,14 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -639,7 +667,23 @@ CONFIG_NETDEVICES=y
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
@@ -650,12 +694,16 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -676,14 +724,12 @@ CONFIG_NET_PCI=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
-CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -699,6 +745,8 @@ CONFIG_E1000_NAPI=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -765,7 +813,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
@@ -775,7 +827,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -800,44 +852,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -864,20 +936,26 @@ CONFIG_SPI_ORION=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
 
 #
 # Multimedia devices
@@ -910,8 +988,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
+# Console display driver support
 #
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -922,9 +1002,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -940,8 +1047,9 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -956,20 +1064,23 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=y
+CONFIG_USB_PRINTER=m
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -992,7 +1103,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1005,7 +1115,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1023,8 +1133,12 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 # CONFIG_LEDS_CLASS is not set
 
@@ -1038,6 +1152,8 @@ CONFIG_NEW_LEDS=y
 # CONFIG_LEDS_TRIGGERS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
 
 #
@@ -1056,7 +1172,6 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
-CONFIG_RTC_DRV_MV=y
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_ISL1208 is not set
 # CONFIG_RTC_DRV_X1205 is not set
@@ -1064,29 +1179,39 @@ CONFIG_RTC_DRV_MV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
 
 #
@@ -1099,6 +1224,8 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
 
 #
@@ -1109,11 +1236,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -1131,7 +1259,7 @@ CONFIG_INOTIFY_USER=y
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 # CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
@@ -1140,9 +1268,9 @@ CONFIG_UDF_NLS=y
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
@@ -1152,6 +1280,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1182,6 +1311,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1192,13 +1322,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1210,24 +1340,8 @@ CONFIG_SUNRPC=y
 #
 # Partition Types
 #
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
+# CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1284,11 +1398,14 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1300,21 +1417,40 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1326,6 +1462,7 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_ASYNC_CORE=y
 CONFIG_CRYPTO=y
@@ -1333,8 +1470,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_RNG=m
 CONFIG_CRYPTO_MANAGER=m
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1373,6 +1514,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1403,6 +1548,11 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
@@ -1410,10 +1560,9 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig
index 6077f2cb88e4..d25c41bab06c 100644
--- a/arch/arm/configs/ks8695_defconfig
+++ b/arch/arm/configs/ks8695_defconfig
@@ -1,39 +1,67 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc4
-# Thu May 25 15:42:51 2006
+# Linux kernel version: 2.6.27-simtec-micrel1
+# Fri Dec  5 10:30:27 2008
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -41,30 +69,50 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -78,60 +126,77 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91 is not set
-CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
 
 #
 # Kendin/Micrel KS8695 Implementations
 #
 CONFIG_MACH_KS8695=y
-# CONFIG_MACH_DSM320 is not set
-# CONFIG_MACH_CM4002 is not set
-# CONFIG_MACH_CM4008 is not set
-# CONFIG_MACH_CM40xx is not set
-# CONFIG_MACH_LITE300 is not set
-# CONFIG_MACH_SE4200 is not set
-# CONFIG_MACH_MANGA_KS8695 is not set
+CONFIG_MACH_DSM320=y
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -140,16 +205,16 @@ CONFIG_CPU_TLB_V4WBI=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
 #
 CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -173,9 +238,12 @@ CONFIG_PCCARD_NONSTATIC=y
 #
 # Kernel Features
 #
+# CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -184,7 +252,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -194,6 +269,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
 # Floating point emulation
@@ -202,8 +278,7 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev
 #
 # At least one emulation must be selected
 #
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_NWFPE is not set
 # CONFIG_FPE_FASTFPE is not set
 
 #
@@ -212,34 +287,33 @@ CONFIG_FPE_NWFPE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -250,28 +324,21 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -282,13 +349,8 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -296,9 +358,21 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -307,36 +381,40 @@ CONFIG_TCP_CONG_BIC=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -355,22 +433,25 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -388,29 +469,15 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -422,13 +489,17 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -436,127 +507,85 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_ARM_KS8695_ETHER=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_PRISM54=m
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
 # CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -566,7 +595,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -576,6 +604,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -589,9 +618,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -609,132 +642,113 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 
 #
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
+# CONFIG_WATCHDOG is not set
 
 #
-# LED devices
+# Sonics Silicon Backplane
 #
-# CONFIG_NEW_LEDS is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# LED drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 
 #
-# LED Triggers
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Console display driver support
+# Display device support
 #
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
+# Console display driver support
 #
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
-# Real Time Clock
+# Voltage and Current regulators
 #
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -743,16 +757,16 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -774,10 +788,11 @@ CONFIG_DNOTIFY=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -790,67 +805,113 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -859,21 +920,103 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
 
 #
-# Cryptographic options
+# Ciphers
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx31moboard_defconfig b/arch/arm/configs/mx31moboard_defconfig
new file mode 100644
index 000000000000..e90f86d6deef
--- /dev/null
+++ b/arch/arm/configs/mx31moboard_defconfig
@@ -0,0 +1,790 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Fri Oct 24 11:41:22 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX2 is not set
+CONFIG_ARCH_MX3=y
+
+#
+# MX3 Options
+#
+# CONFIG_MACH_MX31ADS is not set
+# CONFIG_MACH_PCM037 is not set
+# CONFIG_MACH_MX31LITE is not set
+CONFIG_MACH_MX31MOBOARD=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig
new file mode 100644
index 000000000000..95ffc0db95a0
--- /dev/null
+++ b/arch/arm/configs/mx31pdk_defconfig
@@ -0,0 +1,773 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc2
+# Sun Oct 26 15:55:29 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX2 is not set
+CONFIG_ARCH_MX3=y
+
+#
+# MX3 Options
+#
+# CONFIG_MACH_MX31ADS is not set
+# CONFIG_MACH_PCM037 is not set
+# CONFIG_MACH_MX31LITE is not set
+CONFIG_MACH_MX31_3DS=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM8400 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_PCBC is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig
new file mode 100644
index 000000000000..325f1e105f69
--- /dev/null
+++ b/arch/arm/configs/neocore926_defconfig
@@ -0,0 +1,1302 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc1
+# Tue Jul 29 10:46:54 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+CONFIG_ARCH_AT91SAM9263=y
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9263 Board Type
+#
+# CONFIG_MACH_AT91SAM9263EK is not set
+# CONFIG_MACH_USB_A9263 is not set
+CONFIG_MACH_NEOCORE926=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_PDC is not set
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_ATMEL_PWM is not set
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
index 0884f2370c3a..61d0fc5b2417 100644
--- a/arch/arm/configs/netx_defconfig
+++ b/arch/arm/configs/netx_defconfig
@@ -728,9 +728,9 @@ CONFIG_RTC_CLASS=m
 #
 # RTC interfaces
 #
-CONFIG_RTC_INTF_SYSFS=m
-CONFIG_RTC_INTF_PROC=m
-CONFIG_RTC_INTF_DEV=m
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
 
 #
 # RTC drivers
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
new file mode 100644
index 000000000000..09543f4de5bc
--- /dev/null
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -0,0 +1,1409 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc7
+# Fri Dec  5 11:54:09 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+CONFIG_MACH_OMAP3_PANDORA=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_COMPAT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_BRIGHT is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DELL is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index 948a212fb1cc..b77d054169ee 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -316,7 +316,82 @@ CONFIG_BINFMT_MISC=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -332,6 +407,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -390,6 +467,54 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
 
 #
 # Input device support
@@ -816,6 +941,27 @@ CONFIG_TMPFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
index 14826f0dabde..59e4463c2da2 100644
--- a/arch/arm/configs/picotux200_defconfig
+++ b/arch/arm/configs/picotux200_defconfig
@@ -1069,9 +1069,9 @@ CONFIG_RTC_CLASS=m
 #
 # RTC interfaces
 #
-CONFIG_RTC_INTF_SYSFS=m
-CONFIG_RTC_INTF_PROC=m
-CONFIG_RTC_INTF_DEV=m
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
 
 #
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index 0c09b23167ec..cd29824d791c 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -1,84 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc3
-# Wed Oct 25 14:12:00 2006
+# Linux kernel version: 2.6.28-rc2
+# Mon Nov 10 14:41:47 2008
 #
 CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
-# CONFIG_CPUSETS is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -92,6 +119,8 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -103,19 +132,26 @@ CONFIG_ARCH_REALVIEW=y
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -123,13 +159,29 @@ CONFIG_ARCH_REALVIEW=y
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
 
 #
 # RealView platform type
 #
 CONFIG_MACH_REALVIEW_EB=y
-CONFIG_REALVIEW_MPCORE=y
+# CONFIG_REALVIEW_EB_A9MP is not set
+CONFIG_REALVIEW_EB_ARM11MP=y
+# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
+CONFIG_MACH_REALVIEW_PB11MP=y
+# CONFIG_MACH_REALVIEW_PB1176 is not set
+# CONFIG_MACH_REALVIEW_PBA8 is not set
+CONFIG_REALVIEW_HIGH_PHYS_OFFSET=y
 
 #
 # Processor Type
@@ -138,12 +190,15 @@ CONFIG_CPU_32=y
 # CONFIG_CPU_ARM926T is not set
 CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
+# CONFIG_CPU_V7 is not set
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V6=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
 CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 
@@ -153,9 +208,10 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
 CONFIG_ARM_GIC=y
 CONFIG_ICST307=y
 
@@ -163,32 +219,44 @@ CONFIG_ICST307=y
 # Bus support
 #
 CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_NR_CPUS=4
 CONFIG_HOTPLUG_CPU=y
 CONFIG_LOCAL_TIMERS=y
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -198,6 +266,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -206,8 +280,7 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=tt
 #
 # At least one emulation must be selected
 #
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_NWFPE is not set
 # CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
 
@@ -215,28 +288,29 @@ CONFIG_VFP=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -255,36 +329,25 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -294,10 +357,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -305,9 +364,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -316,38 +380,37 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -373,7 +436,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -397,115 +459,73 @@ CONFIG_MTD_ARM_INTEGRATOR=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -513,6 +533,7 @@ CONFIG_SMC91X=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -522,7 +543,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -538,9 +558,16 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -558,9 +585,11 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -579,97 +608,91 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# LED devices
+# Sonics Silicon Backplane
 #
-# CONFIG_NEW_LEDS is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# LED drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
-# LED Triggers
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_ARMCLCD=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -677,28 +700,17 @@ CONFIG_FB_ARMCLCD=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -712,100 +724,65 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_ARMAACI=m
-
-#
-# Open Sound System
-#
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_ARMAACI=y
+# CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_AC97_BUS=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# Real Time Clock
+# MMC/SD/SDIO Card Drivers
 #
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# RTC interfaces
+# MMC/SD/SDIO Host Controller Drivers
 #
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_MMC_ARMMMCI=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
-# RTC drivers
+# Voltage and Current regulators
 #
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_PL031=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-# CONFIG_INOTIFY_USER is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -831,11 +808,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -848,29 +825,28 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -878,17 +854,12 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -929,64 +900,177 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_RWSEMS=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Cryptographic options
+# Random Number Generation
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index 907e54344dad..7e253f58ed18 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -1,105 +1,204 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Sep 29 14:50:10 2005
+# Linux kernel version: 2.6.28-rc2
+# Mon Nov 10 14:39:48 2008
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
+CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+CONFIG_ARCH_REALVIEW=y
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-CONFIG_ARCH_REALVIEW=y
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_MSM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
 
 #
 # RealView platform type
 #
 CONFIG_MACH_REALVIEW_EB=y
+# CONFIG_REALVIEW_EB_A9MP is not set
+CONFIG_REALVIEW_EB_ARM11MP=y
+# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
+CONFIG_MACH_REALVIEW_PB11MP=y
+CONFIG_MACH_REALVIEW_PB1176=y
+# CONFIG_MACH_REALVIEW_PBA8 is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-# CONFIG_CPU_V6 is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
+# CONFIG_CPU_ARM926T is not set
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+# CONFIG_CPU_V7 is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -107,8 +206,9 @@ CONFIG_CPU_TLB_V4WBI=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
 CONFIG_ARM_GIC=y
 CONFIG_ICST307=y
 
@@ -116,20 +216,41 @@ CONFIG_ICST307=y
 # Bus support
 #
 CONFIG_ARM_AMBA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_SMP is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -139,6 +260,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -147,26 +274,24 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=tt
 #
 # At least one emulation must be selected
 #
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_VFP is not set
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
@@ -175,6 +300,11 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -186,34 +316,56 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -222,30 +374,37 @@ CONFIG_TCP_CONG_BIC=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -266,7 +425,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
@@ -279,7 +437,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -288,7 +445,7 @@ CONFIG_MTD_ARM_INTEGRATOR=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
 
 #
 # Disk-On-Chip Device Drivers
@@ -296,121 +453,81 @@ CONFIG_MTD_ARM_INTEGRATOR=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -420,7 +537,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -433,11 +549,19 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -455,8 +579,11 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -475,73 +602,91 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Hardware Monitoring support
+# Sonics Silicon Backplane
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Misc devices
+# Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
-# Multimedia Capabilities Port drivers
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_ARMCLCD=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -549,27 +694,17 @@ CONFIG_FB_ARMCLCD=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -577,59 +712,71 @@ CONFIG_SND_PCM=y
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_ARMAACI is not set
-
-#
-# Open Sound System
-#
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_ARMAACI=y
+# CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# USB support
+# MMC/SD/SDIO Card Drivers
 #
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# USB Gadget Support
+# MMC/SD/SDIO Host Controller Drivers
 #
-# CONFIG_USB_GADGET is not set
+CONFIG_MMC_ARMMMCI=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
-# MMC/SD Card support
+# Voltage and Current regulators
 #
-# CONFIG_MMC is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -654,51 +801,59 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
 #
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
+# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -739,26 +894,71 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_LL is not set
 
 #
@@ -766,21 +966,106 @@ CONFIG_DEBUG_ERRORS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Hardware crypto devices
+# Random Number Generation
 #
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
new file mode 100644
index 000000000000..cf3c1b5d7048
--- /dev/null
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -0,0 +1,845 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc3
+# Mon Nov  3 10:10:30 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+CONFIG_ARCH_S3C64XX=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_PLAT_S3C64XX=y
+CONFIG_CPU_S3C6400_INIT=y
+CONFIG_CPU_S3C6400_CLOCK=y
+CONFIG_S3C64XX_SETUP_I2C0=y
+CONFIG_S3C64XX_SETUP_I2C1=y
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+CONFIG_S3C_BOOT_ERROR_RESET=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_DEV_HSMMC=y
+CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_I2C1=y
+CONFIG_CPU_S3C6410=y
+CONFIG_S3C6410_SETUP_SDHCI=y
+CONFIG_MACH_SMDK6410=y
+CONFIG_SMDK6410_SD_CH0=y
+# CONFIG_SMDK6410_SD_CH1 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_VIC=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x51000000,4M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S3C6400=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_S3C2410=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=y
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_COMPAT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_S3C=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index 9a1db20e032a..63a481fbbed4 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -237,6 +237,7 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
 #if __LINUX_ARM_ARCH__ < 5
 
 #include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__fls.h>
 #include <asm-generic/bitops/__ffs.h>
 #include <asm-generic/bitops/fls.h>
 #include <asm-generic/bitops/ffs.h>
@@ -277,16 +278,19 @@ static inline int constant_fls(int x)
  * the clz instruction for much better code efficiency.
  */
 
-#define __fls(x) \
-	( __builtin_constant_p(x) ? constant_fls(x) : \
-	  ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
-
-/* Implement fls() in C so that 64-bit args are suitably truncated */
 static inline int fls(int x)
 {
-	return __fls(x);
+	int ret;
+
+	if (__builtin_constant_p(x))
+	       return constant_fls(x);
+
+	asm("clz\t%0, %1" : "=r" (ret) : "r" (x) : "cc");
+       	ret = 32 - ret;
+	return ret;
 }
 
+#define __fls(x) (fls(x) - 1)
 #define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
 #define __ffs(x) (ffs(x) - 1)
 #define ffz(x) __ffs( ~(x) )
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index de6c59f814a1..6cbd8fdc9f1f 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -10,11 +10,11 @@
 #ifndef _ASMARM_CACHEFLUSH_H
 #define _ASMARM_CACHEFLUSH_H
 
-#include <linux/sched.h>
 #include <linux/mm.h>
 
 #include <asm/glue.h>
 #include <asm/shmparam.h>
+#include <asm/cachetype.h>
 
 #define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
 
@@ -296,16 +296,6 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
 #endif
 
 /*
- * flush_cache_vmap() is used when creating mappings (eg, via vmap,
- * vmalloc, ioremap etc) in kernel space for pages.  Since the
- * direct-mappings of these pages may contain cached data, we need
- * to do a full cache flush to ensure that writebacks don't corrupt
- * data placed into these pages via the new mappings.
- */
-#define flush_cache_vmap(start, end)		flush_cache_all()
-#define flush_cache_vunmap(start, end)		flush_cache_all()
-
-/*
  * Copy user data from/to a page which is mapped into a different
  * processes address space.  Really, we want to allow our "user
  * space" model to handle this.
@@ -444,4 +434,29 @@ static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt,
 	dmac_inv_range(start, start + size);
 }
 
+/*
+ * flush_cache_vmap() is used when creating mappings (eg, via vmap,
+ * vmalloc, ioremap etc) in kernel space for pages.  On non-VIPT
+ * caches, since the direct-mappings of these pages may contain cached
+ * data, we need to do a full cache flush to ensure that writebacks
+ * don't corrupt data placed into these pages via the new mappings.
+ */
+static inline void flush_cache_vmap(unsigned long start, unsigned long end)
+{
+	if (!cache_is_vipt_nonaliasing())
+		flush_cache_all();
+	else
+		/*
+		 * set_pte_at() called from vmap_pte_range() does not
+		 * have a DSB after cleaning the cache line.
+		 */
+		dsb();
+}
+
+static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
+{
+	if (!cache_is_vipt_nonaliasing())
+		flush_cache_all();
+}
+
 #endif
diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h
new file mode 100644
index 000000000000..b6ec7c627b39
--- /dev/null
+++ b/arch/arm/include/asm/clkdev.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/arm/include/asm/clkdev.h
+ *
+ *  Copyright (C) 2008 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Helper for the clk API to assist looking up a struct clk.
+ */
+#ifndef __ASM_CLKDEV_H
+#define __ASM_CLKDEV_H
+
+struct clk;
+
+struct clk_lookup {
+	struct list_head	node;
+	const char		*dev_id;
+	const char		*con_id;
+	struct clk		*clk;
+};
+
+struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
+	const char *dev_fmt, ...);
+
+void clkdev_add(struct clk_lookup *cl);
+void clkdev_drop(struct clk_lookup *cl);
+
+#endif
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 4ed149cbb32a..22cb14ec3438 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -69,7 +69,9 @@ extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
  */
 static inline int dma_supported(struct device *dev, u64 mask)
 {
-	return dev->dma_mask && *dev->dma_mask != 0;
+	if (mask < ISA_DMA_THRESHOLD)
+		return 0;
+	return 1;
 }
 
 static inline int dma_set_mask(struct device *dev, u64 dma_mask)
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index 75154b193117..df5638f3643a 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -1,12 +1,7 @@
 #ifndef __ASM_ARM_DMA_H
 #define __ASM_ARM_DMA_H
 
-typedef unsigned int dmach_t;
-
-#include <linux/spinlock.h>
-#include <asm/system.h>
-#include <asm/scatterlist.h>
-#include <mach/dma.h>
+#include <asm/memory.h>
 
 /*
  * This is the maximum virtual address which can be DMA'd from.
@@ -15,6 +10,19 @@ typedef unsigned int dmach_t;
 #define MAX_DMA_ADDRESS	0xffffffff
 #endif
 
+#ifdef CONFIG_ISA_DMA_API
+/*
+ * This is used to support drivers written for the x86 ISA DMA API.
+ * It should not be re-used except for that purpose.
+ */
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/scatterlist.h>
+
+typedef unsigned int dmach_t;
+
+#include <mach/isa-dma.h>
+
 /*
  * DMA modes
  */
@@ -140,4 +148,6 @@ extern int isa_dma_bridge_buggy;
 #define isa_dma_bridge_buggy    (0)
 #endif
 
-#endif /* _ARM_DMA_H */
+#endif /* CONFIG_ISA_DMA_API */
+
+#endif /* __ASM_ARM_DMA_H */
diff --git a/arch/arm/include/asm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h
index 9c5afbd71a69..f9ee69e4f53e 100644
--- a/arch/arm/include/asm/hardware/iomd.h
+++ b/arch/arm/include/asm/hardware/iomd.h
@@ -32,19 +32,11 @@
 #define IOMD_KARTRX	(0x004)
 #define IOMD_KCTRL	(0x008)
 
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_IOLINES	(0x00C)
-#endif
-
 #define IOMD_IRQSTATA	(0x010)
 #define IOMD_IRQREQA	(0x014)
 #define IOMD_IRQCLRA	(0x014)
 #define IOMD_IRQMASKA	(0x018)
 
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_SUSMODE	(0x01C)
-#endif
-
 #define IOMD_IRQSTATB	(0x020)
 #define IOMD_IRQREQB	(0x024)
 #define IOMD_IRQMASKB	(0x028)
@@ -53,10 +45,6 @@
 #define IOMD_FIQREQ	(0x034)
 #define IOMD_FIQMASK	(0x038)
 
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_CLKCTL	(0x03C)
-#endif
-
 #define IOMD_T0CNTL	(0x040)
 #define IOMD_T0LTCHL	(0x040)
 #define IOMD_T0CNTH	(0x044)
@@ -71,18 +59,6 @@
 #define IOMD_T1GO	(0x058)
 #define IOMD_T1LATCH	(0x05c)
 
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_IRQSTATC	(0x060)
-#define IOMD_IRQREQC	(0x064)
-#define IOMD_IRQMASKC	(0x068)
-
-#define IOMD_VIDMUX	(0x06c)
-
-#define IOMD_IRQSTATD	(0x070)
-#define IOMD_IRQREQD	(0x074)
-#define IOMD_IRQMASKD	(0x078)
-#endif
-
 #define IOMD_ROMCR0	(0x080)
 #define IOMD_ROMCR1	(0x084)
 #ifdef CONFIG_ARCH_RPC
@@ -100,11 +76,6 @@
 #define IOMD_MOUSEY	(0x0A4)
 #endif
 
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_MSEDAT	(0x0A8)
-#define IOMD_MSECTL	(0x0Ac)
-#endif
-
 #ifdef CONFIG_ARCH_RPC
 #define IOMD_DMATCR	(0x0C0)
 #endif
@@ -113,18 +84,6 @@
 #ifdef CONFIG_ARCH_RPC
 #define IOMD_DMAEXT	(0x0CC)
 #endif
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_ASTCR	(0x0CC)
-#define IOMD_DRAMCR	(0x0D0)
-#define IOMD_SELFREF	(0x0D4)
-#define IOMD_ATODICR	(0x0E0)
-#define IOMD_ATODSR	(0x0E4)
-#define IOMD_ATODCC	(0x0E8)
-#define IOMD_ATODCNT1	(0x0EC)
-#define IOMD_ATODCNT2	(0x0F0)
-#define IOMD_ATODCNT3	(0x0F4)
-#define IOMD_ATODCNT4	(0x0F8)
-#endif
 
 #ifdef CONFIG_ARCH_RPC
 #define DMA_EXT_IO0	1
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index 263f2c362a30..f87328d4a180 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -29,15 +29,17 @@
 #define VIC_INT_SOFT			0x18
 #define VIC_INT_SOFT_CLEAR		0x1c
 #define VIC_PROTECT			0x20
-#define VIC_VECT_ADDR			0x30
-#define VIC_DEF_VECT_ADDR		0x34
+#define VIC_PL190_VECT_ADDR		0x30	/* PL190 only */
+#define VIC_PL190_DEF_VECT_ADDR		0x34	/* PL190 only */
 
-#define VIC_VECT_ADDR0			0x100	/* 0 to 15 */
-#define VIC_VECT_CNTL0			0x200	/* 0 to 15 */
+#define VIC_VECT_ADDR0			0x100	/* 0 to 15 (0..31 PL192) */
+#define VIC_VECT_CNTL0			0x200	/* 0 to 15 (0..31 PL192) */
 #define VIC_ITCR			0x300	/* VIC test control register */
 
 #define VIC_VECT_CNTL_ENABLE		(1 << 5)
 
+#define VIC_PL192_VECT_ADDR		0xF00
+
 #ifndef __ASSEMBLY__
 void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
 #endif
diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h
index 81f4c899a555..bda489f9f017 100644
--- a/arch/arm/include/asm/hwcap.h
+++ b/arch/arm/include/asm/hwcap.h
@@ -16,6 +16,7 @@
 #define HWCAP_IWMMXT	512
 #define HWCAP_CRUNCH	1024
 #define HWCAP_THUMBEE	2048
+#define HWCAP_NEON	4096
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 /*
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index a8094451be57..d2a59cfc30ce 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -80,6 +80,14 @@ extern void __iounmap(volatile void __iomem *addr);
 extern void __readwrite_bug(const char *fn);
 
 /*
+ * A typesafe __io() helper
+ */
+static inline void __iomem *__typesafe_io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+
+/*
  * Now, pick up the machine-defined IO definitions
  */
 #include <mach/io.h>
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index a0009aa5d157..328f14a8b790 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -7,10 +7,6 @@
 #define irq_canonicalize(i)	(i)
 #endif
 
-#ifndef NR_IRQS
-#define NR_IRQS	128
-#endif
-
 /*
  * Use this value to indicate lack of interrupt
  * capability
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 77764301844b..0202a7c20e62 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -112,10 +112,8 @@
  * private definitions which should NOT be used outside memory.h
  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
  */
-#ifndef __virt_to_phys
 #define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
-#endif
 
 /*
  * Convert a physical address to a Page Frame Number and back
@@ -180,6 +178,11 @@ static inline void *phys_to_virt(unsigned long x)
  * memory.  Use of these is *deprecated* (and that doesn't mean
  * use the __ prefixed forms instead.)  See dma-mapping.h.
  */
+#ifndef __virt_to_bus
+#define __virt_to_bus	__virt_to_phys
+#define __bus_to_virt	__phys_to_virt
+#endif
+
 static inline __deprecated unsigned long virt_to_bus(void *x)
 {
 	return __virt_to_bus((unsigned long)x);
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 0559f37c2a27..263fed05ea33 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -14,6 +14,7 @@
 #define __ASM_ARM_MMU_CONTEXT_H
 
 #include <linux/compiler.h>
+#include <linux/sched.h>
 #include <asm/cacheflush.h>
 #include <asm/cachetype.h>
 #include <asm/proc-fns.h>
diff --git a/arch/arm/include/asm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h
index d8fbe2d9b8b9..d79d66d2cf71 100644
--- a/arch/arm/include/asm/mtd-xip.h
+++ b/arch/arm/include/asm/mtd-xip.h
@@ -15,7 +15,6 @@
 #ifndef __ARM_MTD_XIP_H__
 #define __ARM_MTD_XIP_H__
 
-#include <mach/hardware.h>
 #include <mach/mtd-xip.h>
 
 /* fill instruction prefetch */
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index bed1c0a00368..f341c9dbd662 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -108,32 +108,38 @@
 #error Unknown user operations model
 #endif
 
+struct page;
+
 struct cpu_user_fns {
-	void (*cpu_clear_user_page)(void *p, unsigned long user);
-	void (*cpu_copy_user_page)(void *to, const void *from,
-				   unsigned long user);
+	void (*cpu_clear_user_highpage)(struct page *page, unsigned long vaddr);
+	void (*cpu_copy_user_highpage)(struct page *to, struct page *from,
+			unsigned long vaddr);
 };
 
 #ifdef MULTI_USER
 extern struct cpu_user_fns cpu_user;
 
-#define __cpu_clear_user_page	cpu_user.cpu_clear_user_page
-#define __cpu_copy_user_page	cpu_user.cpu_copy_user_page
+#define __cpu_clear_user_highpage	cpu_user.cpu_clear_user_highpage
+#define __cpu_copy_user_highpage	cpu_user.cpu_copy_user_highpage
 
 #else
 
-#define __cpu_clear_user_page	__glue(_USER,_clear_user_page)
-#define __cpu_copy_user_page	__glue(_USER,_copy_user_page)
+#define __cpu_clear_user_highpage	__glue(_USER,_clear_user_highpage)
+#define __cpu_copy_user_highpage	__glue(_USER,_copy_user_highpage)
 
-extern void __cpu_clear_user_page(void *p, unsigned long user);
-extern void __cpu_copy_user_page(void *to, const void *from,
-				 unsigned long user);
+extern void __cpu_clear_user_highpage(struct page *page, unsigned long vaddr);
+extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
+			unsigned long vaddr);
 #endif
 
-#define clear_user_page(addr,vaddr,pg)	 __cpu_clear_user_page(addr, vaddr)
-#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr)
+#define clear_user_highpage(page,vaddr)		\
+	 __cpu_clear_user_highpage(page, vaddr)
+
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+#define copy_user_highpage(to,from,vaddr,vma)	\
+	__cpu_copy_user_highpage(to, from, vaddr)
 
-#define clear_page(page)	memzero((void *)(page), PAGE_SIZE)
+#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, const void *from);
 
 #undef STRICT_MM_TYPECHECKS
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 517a4d6ffc74..1845892260e7 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -23,7 +23,7 @@
 #include <asm/types.h>
 
 #ifdef __KERNEL__
-#define STACK_TOP	((current->personality == PER_LINUX_32BIT) ? \
+#define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \
 			 TASK_SIZE : TASK_SIZE_26)
 #define STACK_TOP_MAX	TASK_SIZE
 #endif
@@ -64,7 +64,7 @@ struct thread_struct {
 ({									\
 	unsigned long *stack = (unsigned long *)sp;			\
 	set_fs(USER_DS);						\
-	memzero(regs->uregs, sizeof(regs->uregs));			\
+	memset(regs->uregs, 0, sizeof(regs->uregs));			\
 	if (current->personality & ADDR_LIMIT_32BIT)			\
 		regs->ARM_cpsr = USR_MODE;				\
 	else								\
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index a65413ba121d..f2cd18a0932b 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -209,9 +209,11 @@ struct meminfo {
 	struct membank bank[NR_BANKS];
 };
 
+extern struct meminfo meminfo;
+
 #define for_each_nodebank(iter,mi,no)			\
-	for (iter = 0; iter < mi->nr_banks; iter++)	\
-		if (mi->bank[iter].node == no)
+	for (iter = 0; iter < (mi)->nr_banks; iter++)	\
+		if ((mi)->bank[iter].node == no)
 
 #define bank_pfn_start(bank)	__phys_to_pfn((bank)->start)
 #define bank_pfn_end(bank)	__phys_to_pfn((bank)->start + (bank)->size)
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 727b5c042e52..fad70da5911d 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -114,7 +114,7 @@ extern void local_timer_interrupt(void);
 /*
  * Stop a local timer interrupt.
  */
-extern void local_timer_stop(unsigned int cpu);
+extern void local_timer_stop(void);
 
 /*
  * Platform provides this to acknowledge a local timer IRQ
@@ -123,7 +123,7 @@ extern int local_timer_ack(void);
 
 #else
 
-static inline void local_timer_stop(unsigned int cpu)
+static inline void local_timer_stop(void)
 {
 }
 
@@ -132,7 +132,7 @@ static inline void local_timer_stop(unsigned int cpu)
 /*
  * Setup a local timer interrupt for a CPU.
  */
-extern void local_timer_setup(unsigned int cpu);
+extern void local_timer_setup(void);
 
 /*
  * show local interrupt info
diff --git a/arch/arm/include/asm/string.h b/arch/arm/include/asm/string.h
index e50c4a39b699..cf4f3aad0fc1 100644
--- a/arch/arm/include/asm/string.h
+++ b/arch/arm/include/asm/string.h
@@ -21,7 +21,6 @@ extern void * memmove(void *, const void *, __kernel_size_t);
 #define __HAVE_ARCH_MEMCHR
 extern void * memchr(const void *, int, __kernel_size_t);
 
-#define __HAVE_ARCH_MEMZERO
 #define __HAVE_ARCH_MEMSET
 extern void * memset(void *, int, __kernel_size_t);
 
@@ -39,12 +38,4 @@ extern void __memzero(void *ptr, __kernel_size_t n);
 		(__p);							\
 	})
 
-#define memzero(p,n) 							\
-	({ 								\
-	 	void *__p = (p); size_t __n = n;			\
-	 	if ((__n) != 0) 					\
-	 		__memzero((__p),(__n)); 			\
-	 	(__p); 							\
-	 })
-
 #endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 568020b34e3e..811be55f338e 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -3,8 +3,6 @@
 
 #ifdef __KERNEL__
 
-#include <asm/memory.h>
-
 #define CPU_ARCH_UNKNOWN	0
 #define CPU_ARCH_ARMv3		1
 #define CPU_ARCH_ARMv4		2
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index e98ec60b3400..7897464e0c24 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -11,7 +11,8 @@
 /*
  * User space memory access functions
  */
-#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/thread_info.h>
 #include <asm/errno.h>
 #include <asm/memory.h>
 #include <asm/domain.h>
@@ -400,7 +401,7 @@ static inline unsigned long __must_check copy_from_user(void *to, const void __u
 	if (access_ok(VERIFY_READ, from, n))
 		n = __copy_from_user(to, from, n);
 	else /* security hole - plug it */
-		memzero(to, n);
+		memset(to, 0, n);
 	return n;
 }
 
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index c74f766ffc12..531e1860e546 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/cryptohash.h>
 #include <linux/delay.h>
@@ -115,6 +116,8 @@ EXPORT_SYMBOL(__strnlen_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 
 #ifdef CONFIG_MMU
+EXPORT_SYMBOL(copy_page);
+
 EXPORT_SYMBOL(__copy_from_user);
 EXPORT_SYMBOL(__copy_to_user);
 EXPORT_SYMBOL(__clear_user);
@@ -181,8 +184,6 @@ EXPORT_SYMBOL(_find_first_bit_be);
 EXPORT_SYMBOL(_find_next_bit_be);
 #endif
 
-EXPORT_SYMBOL(copy_page);
-
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
 #endif
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 6c90479e8974..c63842766229 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -95,7 +95,7 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	return ret;
 }
 
-/* run from kstop_machine */
+/* run from ftrace_init with irqs disabled */
 int __init ftrace_dyn_arch_init(void *data)
 {
 	ftrace_mcount_set(data);
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index bde52df1c668..991952c644d1 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -18,7 +18,7 @@
 __switch_data:
 	.long	__mmap_switched
 	.long	__data_loc			@ r4
-	.long	__data_start			@ r5
+	.long	_data				@ r5
 	.long	__bss_start			@ r6
 	.long	_end				@ r7
 	.long	processor_id			@ r4
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index b8d965dcd6fd..dab48f27263f 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -21,6 +21,7 @@
 #include <linux/string.h>
 
 #include <asm/pgtable.h>
+#include <asm/sections.h>
 
 #ifdef CONFIG_XIP_KERNEL
 /*
@@ -29,9 +30,8 @@
  * MODULES_VADDR is redefined here and not in asm/memory.h to avoid
  * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
  */
-extern void _etext;
 #undef MODULES_VADDR
-#define MODULES_VADDR	(((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK)
+#define MODULES_VADDR	(((unsigned long)_etext + ~PGDIR_MASK) & PGDIR_MASK)
 #endif
 
 #ifdef CONFIG_MMU
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 1f1eecca7f55..7049815d66d5 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -29,6 +29,7 @@
 #include <asm/cputype.h>
 #include <asm/elf.h>
 #include <asm/procinfo.h>
+#include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/cacheflush.h>
@@ -59,9 +60,8 @@ static int __init fpe_setup(char *line)
 __setup("fpe=", fpe_setup);
 #endif
 
-extern void paging_init(struct meminfo *, struct machine_desc *desc);
+extern void paging_init(struct machine_desc *desc);
 extern void reboot_setup(char *str);
-extern void _text, _etext, __data_start, _edata, _end;
 
 unsigned int processor_id;
 EXPORT_SYMBOL(processor_id);
@@ -112,7 +112,6 @@ static struct stack stacks[NR_CPUS];
 char elf_platform[ELF_PLATFORM_SIZE];
 EXPORT_SYMBOL(elf_platform);
 
-static struct meminfo meminfo __initdata = { 0, };
 static const char *cpu_name;
 static const char *machine_name;
 static char __initdata command_line[COMMAND_LINE_SIZE];
@@ -367,21 +366,34 @@ static struct machine_desc * __init setup_machine(unsigned int nr)
 	return list;
 }
 
-static void __init arm_add_memory(unsigned long start, unsigned long size)
+static int __init arm_add_memory(unsigned long start, unsigned long size)
 {
-	struct membank *bank;
+	struct membank *bank = &meminfo.bank[meminfo.nr_banks];
+
+	if (meminfo.nr_banks >= NR_BANKS) {
+		printk(KERN_CRIT "NR_BANKS too low, "
+			"ignoring memory at %#lx\n", start);
+		return -EINVAL;
+	}
 
 	/*
 	 * Ensure that start/size are aligned to a page boundary.
 	 * Size is appropriately rounded down, start is rounded up.
 	 */
 	size -= start & ~PAGE_MASK;
-
-	bank = &meminfo.bank[meminfo.nr_banks++];
-
 	bank->start = PAGE_ALIGN(start);
 	bank->size  = size & PAGE_MASK;
 	bank->node  = PHYS_TO_NID(start);
+
+	/*
+	 * Check whether this memory region has non-zero size or
+	 * invalid node number.
+	 */
+	if (bank->size == 0 || bank->node >= MAX_NUMNODES)
+		return -EINVAL;
+
+	meminfo.nr_banks++;
+	return 0;
 }
 
 /*
@@ -472,10 +484,10 @@ request_standard_resources(struct meminfo *mi, struct machine_desc *mdesc)
 	struct resource *res;
 	int i;
 
-	kernel_code.start   = virt_to_phys(&_text);
-	kernel_code.end     = virt_to_phys(&_etext - 1);
-	kernel_data.start   = virt_to_phys(&__data_start);
-	kernel_data.end     = virt_to_phys(&_end - 1);
+	kernel_code.start   = virt_to_phys(_text);
+	kernel_code.end     = virt_to_phys(_etext - 1);
+	kernel_data.start   = virt_to_phys(_data);
+	kernel_data.end     = virt_to_phys(_end - 1);
 
 	for (i = 0; i < mi->nr_banks; i++) {
 		if (mi->bank[i].size == 0)
@@ -539,14 +551,7 @@ __tagtable(ATAG_CORE, parse_tag_core);
 
 static int __init parse_tag_mem32(const struct tag *tag)
 {
-	if (meminfo.nr_banks >= NR_BANKS) {
-		printk(KERN_WARNING
-		       "Ignoring memory bank 0x%08x size %dKB\n",
-			tag->u.mem.start, tag->u.mem.size / 1024);
-		return -EINVAL;
-	}
-	arm_add_memory(tag->u.mem.start, tag->u.mem.size);
-	return 0;
+	return arm_add_memory(tag->u.mem.start, tag->u.mem.size);
 }
 
 __tagtable(ATAG_MEM, parse_tag_mem32);
@@ -710,15 +715,15 @@ void __init setup_arch(char **cmdline_p)
 		parse_tags(tags);
 	}
 
-	init_mm.start_code = (unsigned long) &_text;
-	init_mm.end_code   = (unsigned long) &_etext;
-	init_mm.end_data   = (unsigned long) &_edata;
-	init_mm.brk	   = (unsigned long) &_end;
+	init_mm.start_code = (unsigned long) _text;
+	init_mm.end_code   = (unsigned long) _etext;
+	init_mm.end_data   = (unsigned long) _edata;
+	init_mm.brk	   = (unsigned long) _end;
 
 	memcpy(boot_command_line, from, COMMAND_LINE_SIZE);
 	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
 	parse_cmdline(cmdline_p, from);
-	paging_init(&meminfo, mdesc);
+	paging_init(mdesc);
 	request_standard_resources(&meminfo, mdesc);
 
 #ifdef CONFIG_SMP
@@ -772,6 +777,8 @@ static const char *hwcap_str[] = {
 	"java",
 	"iwmmxt",
 	"crunch",
+	"thumbee",
+	"neon",
 	NULL
 };
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index e42a749a56dd..019237d21622 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -181,7 +181,7 @@ int __cpuexit __cpu_disable(void)
 	/*
 	 * Stop the local timer for this CPU.
 	 */
-	local_timer_stop(cpu);
+	local_timer_stop();
 
 	/*
 	 * Flush user cache and TLB mappings, and then remove this CPU
@@ -284,7 +284,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	/*
 	 * Setup local timer for this CPU.
 	 */
-	local_timer_setup(cpu);
+	local_timer_setup();
 
 	calibrate_delay();
 
diff --git a/arch/arm/kernel/thumbee.c b/arch/arm/kernel/thumbee.c
index df3f6b7ebcea..9cb7aaca159f 100644
--- a/arch/arm/kernel/thumbee.c
+++ b/arch/arm/kernel/thumbee.c
@@ -25,7 +25,7 @@
 /*
  * Access to the ThumbEE Handler Base register
  */
-static inline unsigned long teehbr_read()
+static inline unsigned long teehbr_read(void)
 {
 	unsigned long v;
 	asm("mrc	p14, 6, %0, c1, c0, 0\n" : "=r" (v));
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 57e6874d0b80..79abc4ddc0cf 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -18,6 +18,7 @@
 #include <linux/personality.h>
 #include <linux/kallsyms.h>
 #include <linux/delay.h>
+#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/uaccess.h>
 
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 4898bdcfe7dd..00216071eaf7 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -119,7 +119,7 @@ SECTIONS
 #endif
 
 	.data : AT(__data_loc) {
-		__data_start = .;	/* address in memory */
+		_data = .;		/* address in memory */
 
 		/*
 		 * first, the init task union, aligned
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 30351cd4560d..866f84a586ff 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -38,7 +38,6 @@ else
 endif
 
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_CLPS7500)	+= io-acorn.o
 lib-$(CONFIG_ARCH_L7200)	+= io-acorn.o
 lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index 761eefa76243..650d5923ab83 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -25,7 +25,7 @@
 	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
 /*
  * The pointer is now aligned and the length is adjusted.  Try doing the
- * memzero again.
+ * memset again.
  */
 
 ENTRY(memset)
diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile
index a8e462f58bc9..20ec83896c37 100644
--- a/arch/arm/mach-aaec2000/Makefile
+++ b/arch/arm/mach-aaec2000/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support (must be linked before board specific support)
-obj-y += core.o clock.o
+obj-y += core.o
 
 # Specific board support
 obj-$(CONFIG_MACH_AAED2000) += aaed2000.o
diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c
deleted file mode 100644
index e10ee158d720..000000000000
--- a/arch/arm/mach-aaec2000/clock.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- *  linux/arch/arm/mach-aaec2000/clock.c
- *
- *  Copyright (C) 2005 Nicolas Bellido Y Ortega
- *
- *  Based on linux/arch/arm/mach-integrator/clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include "clock.h"
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_register(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-static int __init clk_init(void)
-{
-	return 0;
-}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-aaec2000/clock.h b/arch/arm/mach-aaec2000/clock.h
deleted file mode 100644
index d4bb74ff613f..000000000000
--- a/arch/arm/mach-aaec2000/clock.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/arch/arm/mach-aaec2000/clock.h
- *
- *  Copyright (C) 2005 Nicolas Bellido Y Ortega
- *
- *  Based on linux/arch/arm/mach-integrator/clock.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct module;
-
-struct clk {
-	struct list_head	node;
-	unsigned long		rate;
-	struct module		*owner;
-	const char		*name;
-	void			*data;
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index dfb26bc23d1a..50e13965dfed 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/timex.h>
 #include <linux/signal.h>
+#include <linux/clk.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -30,7 +31,6 @@
 #include <asm/mach/map.h>
 
 #include "core.h"
-#include "clock.h"
 
 /*
  * Common I/O mapping:
@@ -229,9 +229,28 @@ static struct amba_device *amba_devs[] __initdata = {
 	&clcd_device,
 };
 
-static struct clk aaec2000_clcd_clk = {
-	.name = "CLCDCLK",
-};
+void clk_disable(struct clk *clk)
+{
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return dev && strcmp(dev_name(dev), "mb:16") == 0 ? NULL : ERR_PTR(-ENOENT);
+}
+
+void clk_put(struct clk *clk)
+{
+}
 
 void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
 {
@@ -265,8 +284,6 @@ static int __init aaec2000_init(void)
 {
 	int i;
 
-	clk_register(&aaec2000_clcd_clk);
-
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
diff --git a/arch/arm/mach-aaec2000/include/mach/dma.h b/arch/arm/mach-aaec2000/include/mach/dma.h
deleted file mode 100644
index 2da846c72fe7..000000000000
--- a/arch/arm/mach-aaec2000/include/mach/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- *  arch/arm/mach-aaec2000/include/mach/dma.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
diff --git a/arch/arm/mach-aaec2000/include/mach/io.h b/arch/arm/mach-aaec2000/include/mach/io.h
index c87c24de1110..ab4fe5d20eaf 100644
--- a/arch/arm/mach-aaec2000/include/mach/io.h
+++ b/arch/arm/mach-aaec2000/include/mach/io.h
@@ -6,15 +6,13 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/hardware.h>
-
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
  * We don't actually have real ISA nor PCI buses, but there is so many
  * drivers out there that might just work if we fake them...
  */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h
index 56ae900a482e..c00822543d9f 100644
--- a/arch/arm/mach-aaec2000/include/mach/memory.h
+++ b/arch/arm/mach-aaec2000/include/mach/memory.h
@@ -14,9 +14,6 @@
 
 #define PHYS_OFFSET	UL(0xf0000000)
 
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
 /*
  * The nodes are the followings:
  *
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5aafb2e2ca7a..323b47f2b52f 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -7,36 +7,43 @@ choice
 
 config ARCH_AT91RM9200
 	bool "AT91RM9200"
+	select CPU_ARM920T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9260
 	bool "AT91SAM9260 or AT91SAM9XE"
+	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
+	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
+	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
+	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
+	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
+	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
@@ -235,6 +242,12 @@ config MACH_USB_A9263
 	  Select this if you are using a Calao Systems USB-A9263.
 	  <http://www.calao-systems.com>
 
+config MACH_NEOCORE926
+	bool "Adeneo NEOCORE926"
+	depends on ARCH_AT91SAM9263
+	help
+	  Select this if you are using the Adeneo Neocore 926 board.
+
 endif
 
 # ----------------------------------------------------------
@@ -302,7 +315,7 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
 	help
 	  Enable support for the DataFlash card.
 
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index cca612d97ca2..c69ff237fd14 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -11,12 +11,12 @@ obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
 
 # CPU-specific support
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
-obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o  sam9_smc.o
+obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
@@ -47,6 +47,7 @@ obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
 obj-$(CONFIG_MACH_USB_A9263)	+= board-usb-a9263.o
+obj-$(CONFIG_MACH_NEOCORE926)	+= board-neocore926.o
 
 # AT91SAM9RL board-specific support
 obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 0fc0adaebd58..0a38c69fdbc4 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -17,6 +17,8 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+
+#include <mach/cpu.h>
 #include <mach/at91cap9.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
@@ -317,6 +319,12 @@ void __init at91cap9_initialize(unsigned long main_clock)
 
 	/* Register GPIO subsystem */
 	at91_gpio_init(at91cap9_gpio, 4);
+
+	/* Remember the silicon revision */
+	if (cpu_is_at91cap9_revB())
+		system_rev = 0xB;
+	else if (cpu_is_at91cap9_revC())
+		system_rev = 0xC;
 }
 
 /* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 5ebd4273d353..9eca2209cde6 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -13,6 +13,7 @@
  */
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/irq.h>
 
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
@@ -21,6 +22,7 @@
 #include <video/atmel_lcdc.h>
 
 #include <mach/board.h>
+#include <mach/cpu.h>
 #include <mach/gpio.h>
 #include <mach/at91cap9.h>
 #include <mach/at91cap9_matrix.h>
@@ -69,6 +71,9 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 	if (!data)
 		return;
 
+	if (cpu_is_at91cap9_revB())
+		set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
+
 	/* Enable VBus control for UHP ports */
 	for (i = 0; i < data->ports; i++) {
 		if (data->vbus_pin[i])
@@ -151,8 +156,13 @@ static struct platform_device at91_usba_udc_device = {
 
 void __init at91_add_device_usba(struct usba_platform_data *data)
 {
-	at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
-					  AT91_MATRIX_UDPHS_BYPASS_LOCK);
+	if (cpu_is_at91cap9_revB()) {
+		set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
+		at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
+						  AT91_MATRIX_UDPHS_BYPASS_LOCK);
+	}
+	else
+		at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS);
 
 	/*
 	 * Invalid pins are 0 on AT91, but the usba driver is shared
@@ -406,28 +416,13 @@ static struct platform_device at91cap9_nand_device = {
 
 void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
-	unsigned long csa, mode;
+	unsigned long csa;
 
 	if (!data)
 		return;
 
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
-	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1)
-			| AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
-
-	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6)
-			| AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
-
-	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
-
-	if (data->bus_width_16)
-		mode = AT91_SMC_DBW_16;
-	else
-		mode = AT91_SMC_DBW_8;
-	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
 
 	/* enable pin */
 	if (data->enable_pin)
@@ -865,6 +860,9 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	if (!data)
 		return;
 
+	if (cpu_is_at91cap9_revB())
+		set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
+
 	at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
 	at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
 	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index a72e798a2a40..d140eae53ded 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -141,6 +141,15 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 	/* Use "raw" primitives so we behave correctly on RT kernels. */
 	raw_local_irq_save(flags);
 
+	/*
+	 * According to Thomas Gleixner irqs are already disabled here.  Simply
+	 * removing raw_local_irq_save above (and the matching
+	 * raw_local_irq_restore) was not accepted.  See
+	 * http://thread.gmane.org/gmane.linux.ports.arm.kernel/41174
+	 * So for now (2008-11-20) just warn once if irqs were not disabled ...
+	 */
+	WARN_ON_ONCE(!raw_irqs_disabled_flags(flags));
+
 	/* The alarm IRQ uses absolute time (now+delta), not the relative
 	 * time (delta) in our calling convention.  Like all clockevents
 	 * using such "match" hardware, we have a race to defend against.
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 7774d17dde74..fdde1ea21b07 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -313,7 +313,7 @@ static struct platform_device at91sam9260_nand_device = {
 
 void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
-	unsigned long csa, mode;
+	unsigned long csa;
 
 	if (!data)
 		return;
@@ -321,42 +321,6 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
-	if (cpu_is_at91sam9260()) {
-		/* Timing for sam9260 */
-		/* set the bus interface characteristics */
-		at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
-				| AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
-
-		at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
-				| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-
-		at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-
-		if (data->bus_width_16)
-			mode = AT91_SMC_DBW_16;
-		else
-			mode = AT91_SMC_DBW_8;
-		at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
-	}
-
-	if (cpu_is_at91sam9g20()) {
-		/* Timing for sam9g20 */
-		/* set the bus interface characteristics */
-		at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0)
-				| AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
-
-		at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(4)
-				| AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(4));
-
-		at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
-
-		if (data->bus_width_16)
-			mode = AT91_SMC_DBW_16;
-		else
-			mode = AT91_SMC_DBW_8;
-		at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(3));
-	}
-
 	/* enable pin */
 	if (data->enable_pin)
 		at91_set_gpio_output(data->enable_pin, 1);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 6b89172310c7..17289756f80f 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -223,7 +223,7 @@ static struct platform_device atmel_nand_device = {
 
 void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
-	unsigned long csa, mode;
+	unsigned long csa;
 
 	if (!data)
 		return;
@@ -231,21 +231,6 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
-	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
-			| AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
-
-	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
-			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-
-	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-
-	if (data->bus_width_16)
-		mode = AT91_SMC_DBW_16;
-	else
-		mode = AT91_SMC_DBW_8;
-	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
-
 	/* enable pin */
 	if (data->enable_pin)
 		at91_set_gpio_output(data->enable_pin, 1);
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 8b884083f76d..b753cb879d8e 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -382,7 +382,7 @@ static struct platform_device at91sam9263_nand_device = {
 
 void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
-	unsigned long csa, mode;
+	unsigned long csa;
 
 	if (!data)
 		return;
@@ -390,21 +390,6 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 	csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
 	at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
 
-	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
-			| AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
-
-	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
-			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-
-	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-
-	if (data->bus_width_16)
-		mode = AT91_SMC_DBW_16;
-	else
-		mode = AT91_SMC_DBW_8;
-	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
-
 	/* enable pin */
 	if (data->enable_pin)
 		at91_set_gpio_output(data->enable_pin, 1);
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 87deb1e1b529..145324f4ec56 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -232,17 +232,6 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
-	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
-			| AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
-
-	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
-			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-
-	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-
-	at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
-
 	/* enable pin */
 	if (data->enable_pin)
 		at91_set_gpio_output(data->enable_pin, 1);
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index cdddca54b938..d3ba29c5d8c8 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -39,7 +39,9 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
+#include "sam9_smc.h"
 #include "generic.h"
 
 
@@ -151,6 +153,32 @@ static struct atmel_nand_data __initdata cam60_nand_data = {
 	.partition_info	= nand_partitions,
 };
 
+static struct sam9_smc_config __initdata cam60_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+
+static void __init cam60_add_device_nand(void)
+{
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &cam60_nand_smc_config);
+
+	at91_add_device_nand(&cam60_nand_data);
+}
+
 
 static void __init cam60_board_init(void)
 {
@@ -165,7 +193,7 @@ static void __init cam60_board_init(void)
 	at91_set_gpio_output(AT91_PIN_PB18, 1);
 	at91_add_device_usbh(&cam60_usbh_data);
 	/* NAND */
-	at91_add_device_nand(&cam60_nand_data);
+	cam60_add_device_nand();
 }
 
 MACHINE_START(CAM60, "KwikByte CAM60")
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 201b89392dcc..83a1a0fef47b 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -36,17 +36,16 @@
 #include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91cap9_matrix.h>
 #include <mach/at91sam9_smc.h>
 
+#include "sam9_smc.h"
 #include "generic.h"
 
 
@@ -195,6 +194,43 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = {
 #endif
 };
 
+static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
+	.ncs_read_setup		= 1,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 1,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 6,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 6,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 8,
+	.write_cycle		= 8,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 1,
+};
+
+static void __init cap9adk_add_device_nand(void)
+{
+	unsigned long csa;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
+
+	/* setup bus-width (8 or 16) */
+	if (cap9adk_nand_data.bus_width_16)
+		cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &cap9adk_nand_smc_config);
+
+	at91_add_device_nand(&cap9adk_nand_data);
+}
+
 
 /*
  * NOR flash
@@ -234,6 +270,24 @@ static struct platform_device cap9adk_nor_flash = {
 	.num_resources	= ARRAY_SIZE(nor_flash_resources),
 };
 
+static struct sam9_smc_config __initdata cap9adk_nor_smc_config = {
+	.ncs_read_setup		= 2,
+	.nrd_setup		= 4,
+	.ncs_write_setup	= 2,
+	.nwe_setup		= 4,
+
+	.ncs_read_pulse		= 10,
+	.nrd_pulse		= 8,
+	.ncs_write_pulse	= 10,
+	.nwe_pulse		= 8,
+
+	.read_cycle		= 16,
+	.write_cycle		= 16,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
+	.tdf_cycles		= 1,
+};
+
 static __init void cap9adk_add_device_nor(void)
 {
 	unsigned long csa;
@@ -241,18 +295,8 @@ static __init void cap9adk_add_device_nor(void)
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
 
-	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_SETUP(0), AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2)
-			| AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
-
-	at91_sys_write(AT91_SMC_PULSE(0), AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10)
-			| AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
-
-	at91_sys_write(AT91_SMC_CYCLE(0), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
-
-	at91_sys_write(AT91_SMC_MODE(0), AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
-			| AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
+	/* configure chip-select 0 (NOR) */
+	sam9_smc_configure(0, &cap9adk_nor_smc_config);
 
 	platform_device_register(&cap9adk_nor_flash);
 }
@@ -330,10 +374,8 @@ static void __init cap9adk_board_init(void)
 	/* Serial */
 	at91_add_device_serial();
 	/* USB Host */
-	set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_usbh(&cap9adk_usbh_data);
 	/* USB HS */
-	set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_usba(&cap9adk_usba_udc_data);
 	/* SPI */
 	at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
@@ -344,13 +386,12 @@ static void __init cap9adk_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&cap9adk_macb_data);
 	/* NAND */
-	at91_add_device_nand(&cap9adk_nand_data);
+	cap9adk_add_device_nand();
 	/* NOR Flash */
 	cap9adk_add_device_nor();
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* LCD Controller */
-	set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_lcdc(&cap9adk_lcdc_data);
 	/* AC97 */
 	at91_add_device_ac97(&cap9adk_ac97_data);
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
new file mode 100644
index 000000000000..9ba7ba2cc3b1
--- /dev/null
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -0,0 +1,397 @@
+/*
+ * linux/arch/arm/mach-at91/board-neocore926.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2007 Atmel Corporation
+ *  Copyright (C) 2008 ADENEO.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init neocore926_map_io(void)
+{
+	/* Initialize processor: 20 MHz crystal */
+	at91sam9263_initialize(20000000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init neocore926_init_irq(void)
+{
+	at91sam9263_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata neocore926_usbh_data = {
+	.ports		= 2,
+	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata neocore926_udc_data = {
+	.vbus_pin	= AT91_PIN_PA25,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * ADS7846 Touchscreen
+ */
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+static int ads7843_pendown_state(void)
+{
+	return !at91_get_gpio_value(AT91_PIN_PA15);	/* Touchscreen PENIRQ */
+}
+
+static struct ads7846_platform_data ads_info = {
+	.model			= 7843,
+	.x_min			= 150,
+	.x_max			= 3830,
+	.y_min			= 190,
+	.y_max			= 3830,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 450,
+	.y_plate_ohms		= 250,
+	.pressure_max		= 15000,
+	.debounce_max		= 1,
+	.debounce_rep		= 0,
+	.debounce_tol		= (~0),
+	.get_pendown_state	= ads7843_pendown_state,
+};
+
+static void __init neocore926_add_device_ts(void)
+{
+	at91_set_B_periph(AT91_PIN_PA15, 1);	/* External IRQ1, with pullup */
+	at91_set_gpio_input(AT91_PIN_PC13, 1);	/* Touchscreen BUSY signal */
+}
+#else
+static void __init neocore926_add_device_ts(void) {}
+#endif
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info neocore926_spi_devices[] = {
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	{
+		.modalias	= "ads7846",
+		.chip_select	= 1,
+		.max_speed_hz	= 125000 * 16,
+		.bus_num	= 0,
+		.platform_data	= &ads_info,
+		.irq		= AT91SAM9263_ID_IRQ1,
+	},
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata neocore926_mmc_data = {
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PE18,
+	.wp_pin		= AT91_PIN_PE19,
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata neocore926_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PE31,
+	.is_rmii	= 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata neocore926_nand_partition[] = {
+	{
+		.name	= "Linux Kernel",	/* "Partition 1", */
+		.offset	= 0,
+		.size	= SZ_8M,
+	},
+	{
+		.name	= "Filesystem",		/* "Partition 2", */
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_32M,
+	},
+	{
+		.name	= "Free",		/* "Partition 3", */
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(neocore926_nand_partition);
+	return neocore926_nand_partition;
+}
+
+static struct atmel_nand_data __initdata neocore926_nand_data = {
+	.ale			= 21,
+	.cle			= 22,
+	.rdy_pin		= AT91_PIN_PB19,
+	.rdy_pin_active_low	= 1,
+	.enable_pin		= AT91_PIN_PD15,
+	.partition_info		= nand_partitions,
+};
+
+static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 6,
+	.write_cycle		= 6,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+
+static void __init neocore926_add_device_nand(void)
+{
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &neocore926_nand_smc_config);
+
+	at91_add_device_nand(&neocore926_nand_data);
+}
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+	{
+		.name		= "TX09D50VM1CCA @ 60",
+		.refresh	= 60,
+		.xres		= 240,		.yres		= 320,
+		.pixclock	= KHZ2PICOS(5000),
+
+		.left_margin	= 1,		.right_margin	= 33,
+		.upper_margin	= 1,		.lower_margin	= 0,
+		.hsync_len	= 5,		.vsync_len	= 1,
+
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+	.manufacturer	= "HIT",
+	.monitor	= "TX09D70VM1CCA",
+
+	.modedb		= at91_tft_vga_modes,
+	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
+	.hfmin		= 15000,
+	.hfmax		= 64000,
+	.vfmin		= 50,
+	.vfmax		= 150,
+};
+
+#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+					| ATMEL_LCDC_DISTYPE_TFT \
+					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+static void at91_lcdc_power_control(int on)
+{
+	at91_set_gpio_value(AT91_PIN_PA30, on);
+}
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata neocore926_lcdc_data = {
+	.lcdcon_is_backlight		= true,
+	.default_bpp			= 16,
+	.default_dmacon			= ATMEL_LCDC_DMAEN,
+	.default_lcdcon2		= AT91SAM9263_DEFAULT_LCDCON2,
+	.default_monspecs		= &at91fb_default_monspecs,
+	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
+	.guard_time			= 1,
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB555,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata neocore926_lcdc_data;
+#endif
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button neocore926_buttons[] = {
+	{	/* BP1, "leftclic" */
+		.code		= BTN_LEFT,
+		.gpio		= AT91_PIN_PC5,
+		.active_low	= 1,
+		.desc		= "left_click",
+		.wakeup		= 1,
+	},
+	{	/* BP2, "rightclic" */
+		.code		= BTN_RIGHT,
+		.gpio		= AT91_PIN_PC4,
+		.active_low	= 1,
+		.desc		= "right_click",
+		.wakeup		= 1,
+	},
+};
+
+static struct gpio_keys_platform_data neocore926_button_data = {
+	.buttons	= neocore926_buttons,
+	.nbuttons	= ARRAY_SIZE(neocore926_buttons),
+};
+
+static struct platform_device neocore926_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &neocore926_button_data,
+	}
+};
+
+static void __init neocore926_add_device_buttons(void)
+{
+	at91_set_GPIO_periph(AT91_PIN_PC5, 0);	/* left button */
+	at91_set_deglitch(AT91_PIN_PC5, 1);
+	at91_set_GPIO_periph(AT91_PIN_PC4, 0);	/* right button */
+	at91_set_deglitch(AT91_PIN_PC4, 1);
+
+	platform_device_register(&neocore926_button_device);
+}
+#else
+static void __init neocore926_add_device_buttons(void) {}
+#endif
+
+
+/*
+ * AC97
+ */
+static struct atmel_ac97_data neocore926_ac97_data = {
+	.reset_pin	= AT91_PIN_PA13,
+};
+
+
+static void __init neocore926_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+
+	/* USB Host */
+	at91_add_device_usbh(&neocore926_usbh_data);
+
+	/* USB Device */
+	at91_add_device_udc(&neocore926_udc_data);
+
+	/* SPI */
+	at91_set_gpio_output(AT91_PIN_PE20, 1);		/* select spi0 clock */
+	at91_add_device_spi(neocore926_spi_devices, ARRAY_SIZE(neocore926_spi_devices));
+
+	/* Touchscreen */
+	neocore926_add_device_ts();
+
+	/* MMC */
+	at91_add_device_mmc(1, &neocore926_mmc_data);
+
+	/* Ethernet */
+	at91_add_device_eth(&neocore926_macb_data);
+
+	/* NAND */
+	neocore926_add_device_nand();
+
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+
+	/* LCD Controller */
+	at91_add_device_lcdc(&neocore926_lcdc_data);
+
+	/* Push Buttons */
+	neocore926_add_device_buttons();
+
+	/* AC97 */
+	at91_add_device_ac97(&neocore926_ac97_data);
+}
+
+MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
+	/* Maintainer: ADENEO */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= neocore926_map_io,
+	.init_irq	= neocore926_init_irq,
+	.init_machine	= neocore926_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index cfb4571a2e27..4cff9a7e61d2 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -41,8 +41,10 @@
 #include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
 
+#include "sam9_smc.h"
 #include "generic.h"
 
 
@@ -147,13 +149,34 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
 /*
  * MCI (SD/MMC)
  */
@@ -227,7 +250,7 @@ static void __init ek_board_init(void)
 	/* SPI */
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 	/* NAND */
-	at91_add_device_nand(&ek_nand_data);
+	ek_add_device_nand();
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* Ethernet */
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 99bb4cc23a09..b48346977534 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -38,7 +38,9 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
+#include "sam9_smc.h"
 #include "generic.h"
 
 
@@ -148,13 +150,34 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
 
 /*
  * MCI (SD/MMC)
@@ -178,7 +201,7 @@ static void __init ek_board_init(void)
 	/* SPI */
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 	/* NAND */
-	at91_add_device_nand(&ek_nand_data);
+	ek_add_device_nand();
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index b49eb6e4918a..93a0f8b100eb 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -42,7 +42,10 @@
 #include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
 
+#include "sam9_smc.h"
 #include "generic.h"
 
 
@@ -195,6 +198,38 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 #endif
 };
 
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (ek_nand_data.bus_width_16)
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
 
 /*
  * MCI (SD/MMC)
@@ -303,7 +338,7 @@ static void __init ek_board_init(void)
 	/* SPI */
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 	/* NAND */
-	at91_add_device_nand(&ek_nand_data);
+	ek_add_device_nand();
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 4977409d4fc6..d5266da55311 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -47,7 +47,9 @@
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
 
+#include "sam9_smc.h"
 #include "generic.h"
 
 
@@ -76,7 +78,7 @@ static void __init ek_init_irq(void)
  * DM9000 ethernet device
  */
 #if defined(CONFIG_DM9000)
-static struct resource at91sam9261_dm9000_resource[] = {
+static struct resource dm9000_resource[] = {
 	[0] = {
 		.start	= AT91_CHIPSELECT_2,
 		.end	= AT91_CHIPSELECT_2 + 3,
@@ -98,27 +100,42 @@ static struct dm9000_plat_data dm9000_platdata = {
 	.flags		= DM9000_PLATF_16BITONLY,
 };
 
-static struct platform_device at91sam9261_dm9000_device = {
+static struct platform_device dm9000_device = {
 	.name		= "dm9000",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(at91sam9261_dm9000_resource),
-	.resource	= at91sam9261_dm9000_resource,
+	.num_resources	= ARRAY_SIZE(dm9000_resource),
+	.resource	= dm9000_resource,
 	.dev		= {
 		.platform_data	= &dm9000_platdata,
 	}
 };
 
+/*
+ * SMC timings for the DM9000.
+ * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
+ */
+static struct sam9_smc_config __initdata dm9000_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 8,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 8,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 16,
+	.write_cycle		= 16,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
+	.tdf_cycles		= 1,
+};
+
 static void __init ek_add_device_dm9000(void)
 {
-	/*
-	 * Configure Chip-Select 2 on SMC for the DM9000.
-	 * Note: These timings were calculated for MASTER_CLOCK = 100000000
-	 *  according to the DM9000 timings.
-	 */
-	at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
-	at91_sys_write(AT91_SMC_PULSE(2), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
-	at91_sys_write(AT91_SMC_CYCLE(2), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
-	at91_sys_write(AT91_SMC_MODE(2), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
+	/* Configure chip-select 2 (DM9000) */
+	sam9_smc_configure(2, &dm9000_smc_config);
 
 	/* Configure Reset signal as output */
 	at91_set_gpio_output(AT91_PIN_PC10, 0);
@@ -126,7 +143,7 @@ static void __init ek_add_device_dm9000(void)
 	/* Configure Interrupt pin as input, no pull-up */
 	at91_set_gpio_input(AT91_PIN_PC11, 0);
 
-	platform_device_register(&at91sam9261_dm9000_device);
+	platform_device_register(&dm9000_device);
 }
 #else
 static void __init ek_add_device_dm9000(void) {}
@@ -197,6 +214,39 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 #endif
 };
 
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (ek_nand_data.bus_width_16)
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
+
 /*
  * ADS7846 Touchscreen
  */
@@ -525,7 +575,7 @@ static void __init ek_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* NAND */
-	at91_add_device_nand(&ek_nand_data);
+	ek_add_device_nand();
 	/* DM9000 ethernet */
 	ek_add_device_dm9000();
 
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 8354015c6a23..57d52528f224 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -46,7 +46,9 @@
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
 
+#include "sam9_smc.h"
 #include "generic.h"
 
 
@@ -203,6 +205,38 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 #endif
 };
 
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (ek_nand_data.bus_width_16)
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
 
 /*
  * I2C devices
@@ -385,7 +419,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* NAND */
-	at91_add_device_nand(&ek_nand_data);
+	ek_add_device_nand();
 	/* I2C */
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LCD Controller */
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index b588ead14d68..81439fe6fb3d 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -37,7 +37,9 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
+#include "sam9_smc.h"
 #include "generic.h"
 
 
@@ -156,6 +158,38 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 #endif
 };
 
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (ek_nand_data.bus_width_16)
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
 
 /*
  * MCI (SD/MMC)
@@ -195,7 +229,7 @@ static void __init ek_board_init(void)
 	/* SPI */
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 	/* NAND */
-	at91_add_device_nand(&ek_nand_data);
+	ek_add_device_nand();
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 270851864308..9b937ee4815a 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -29,8 +29,9 @@
 #include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
 
+#include "sam9_smc.h"
 #include "generic.h"
 
 
@@ -103,9 +104,34 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PD17,
 	.enable_pin	= AT91_PIN_PB6,
 	.partition_info	= nand_partitions,
-	.bus_width_16	= 0,
 };
 
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
 
 /*
  * SPI devices
@@ -188,7 +214,7 @@ static void __init ek_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* NAND */
-	at91_add_device_nand(&ek_nand_data);
+	ek_add_device_nand();
 	/* SPI */
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 	/* MMC */
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 7c350357333a..d13304c0bc45 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -41,8 +41,10 @@
 #include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
 
+#include "sam9_smc.h"
 #include "generic.h"
 
 
@@ -121,13 +123,34 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
 /*
  * GPIO Buttons
  */
@@ -189,7 +212,7 @@ static void __init ek_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&ek_udc_data);
 	/* NAND */
-	at91_add_device_nand(&ek_nand_data);
+	ek_add_device_nand();
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* Ethernet */
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index 391b566c4571..d96405b7d578 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -40,8 +40,10 @@
 #include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
 
+#include "sam9_smc.h"
 #include "generic.h"
 
 
@@ -134,13 +136,35 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
+
 /*
  * GPIO Buttons
  */
@@ -206,7 +230,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* NAND */
-	at91_add_device_nand(&ek_nand_data);
+	ek_add_device_nand();
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* Push Buttons */
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 2e3f2894b704..9561e33b8a9a 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -23,6 +23,7 @@
 #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
 #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
 #define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define		AT91CAP9_PMC_DDR	(1 <<  2)		/* DDR Clock [AT91CAP9 revC only] */
 #define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
 #define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
 #define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
@@ -102,10 +103,16 @@
 #define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
 #define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
 #define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [AT91CAP9 only] */
+#define		AT91_PMC_OSCSEL		(1 <<  7)		/* Slow Clock Oscillator [AT91CAP9 revC only] */
 #define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
 #define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
 #define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
 #define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
 #define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
 
+#define AT91_PMC_PROT		(AT91_PMC + 0xe4)	/* Protect Register [AT91CAP9 revC only] */
+#define		AT91_PMC_PROTKEY	0x504d4301	/* Activation Code */
+
+#define AT91_PMC_VER		(AT91_PMC + 0xfc)	/* PMC Module Version [AT91CAP9 only] */
+
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index 4a4b64135a92..d8c1ededaa75 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -101,7 +101,9 @@
 #define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
 #define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
 #define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR	(cpu_is_at91cap9_revB() ?	\
+			(0xfffffd50 - AT91_BASE_SYS) :	\
+			(0xfffffd60 - AT91_BASE_SYS))
 
 #define AT91_USART0	AT91CAP9_BASE_US0
 #define AT91_USART1	AT91CAP9_BASE_US1
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index dbfd9f73f80b..c554c3e4d553 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -49,6 +49,17 @@ static inline unsigned long at91_arch_identify(void)
 	return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
 }
 
+#ifdef CONFIG_ARCH_AT91CAP9
+#include <mach/at91_pmc.h>
+
+#define ARCH_REVISION_CAP9_B	0x399
+#define ARCH_REVISION_CAP9_C	0x601
+
+static inline unsigned long at91cap9_rev_identify(void)
+{
+	return (at91_sys_read(AT91_PMC_VER));
+}
+#endif
 
 #ifdef CONFIG_ARCH_AT91RM9200
 #define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
@@ -90,8 +101,12 @@ static inline unsigned long at91_arch_identify(void)
 
 #ifdef CONFIG_ARCH_AT91CAP9
 #define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
+#define cpu_is_at91cap9_revB()	(at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
+#define cpu_is_at91cap9_revC()	(at91cap9_rev_identify() == ARCH_REVISION_CAP9_C)
 #else
 #define cpu_is_at91cap9()	(0)
+#define cpu_is_at91cap9_revB()	(0)
+#define cpu_is_at91cap9_revC()	(0)
 #endif
 
 /*
diff --git a/arch/arm/mach-at91/include/mach/dma.h b/arch/arm/mach-at91/include/mach/dma.h
deleted file mode 100644
index e4f90c177616..000000000000
--- a/arch/arm/mach-at91/include/mach/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/dma.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
index 1611bd03f528..0b0cccc46e68 100644
--- a/arch/arm/mach-at91/include/mach/io.h
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -23,8 +23,8 @@
 
 #define IO_SPACE_LIMIT		0xFFFFFFFF
 
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 
 #ifndef __ASSEMBLY__
diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h
index 9dd1b8c79b08..14f4ef4b6a9e 100644
--- a/arch/arm/mach-at91/include/mach/memory.h
+++ b/arch/arm/mach-at91/include/mach/memory.h
@@ -25,15 +25,4 @@
 
 #define PHYS_OFFSET	(AT91_SDRAM_BASE)
 
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
 #endif
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
new file mode 100644
index 000000000000..5eab6aa621d0
--- /dev/null
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -0,0 +1,47 @@
+/*
+ * linux/arch/arm/mach-at91/sam9_smc.c
+ *
+ * Copyright (C) 2008 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+
+void __init sam9_smc_configure(int cs, struct sam9_smc_config* config)
+{
+	/* Setup register */
+	at91_sys_write(AT91_SMC_SETUP(cs),
+		  AT91_SMC_NWESETUP_(config->nwe_setup)
+		| AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
+		| AT91_SMC_NRDSETUP_(config->nrd_setup)
+		| AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup)
+	);
+
+	/* Pulse register */
+	at91_sys_write(AT91_SMC_PULSE(cs),
+		  AT91_SMC_NWEPULSE_(config->nwe_pulse)
+		| AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
+                | AT91_SMC_NRDPULSE_(config->nrd_pulse)
+		| AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse)
+	);
+
+	/* Cycle register */
+	at91_sys_write(AT91_SMC_CYCLE(cs),
+		  AT91_SMC_NWECYCLE_(config->write_cycle)
+		| AT91_SMC_NRDCYCLE_(config->read_cycle)
+	);
+
+	/* Mode register */
+	at91_sys_write(AT91_SMC_MODE(cs),
+		  config->mode
+		| AT91_SMC_TDF_(config->tdf_cycles)
+	);
+}
diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h
new file mode 100644
index 000000000000..bf72cfb3455b
--- /dev/null
+++ b/arch/arm/mach-at91/sam9_smc.h
@@ -0,0 +1,33 @@
+/*
+ * linux/arch/arm/mach-at91/sam9_smc.
+ *
+ * Copyright (C) 2008 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct sam9_smc_config {
+	/* Setup register */
+	u8 ncs_read_setup;
+	u8 nrd_setup;
+	u8 ncs_write_setup;
+	u8 nwe_setup;
+
+	/* Pulse register */
+	u8 ncs_read_pulse;
+	u8 nrd_pulse;
+	u8 ncs_write_pulse;
+	u8 nwe_pulse;
+
+	/* Cycle register */
+	u16 read_cycle;
+	u16 write_cycle;
+
+	/* Mode register */
+	u32 mode;
+	u8 tdf_cycles:4;
+};
+
+extern void __init sam9_smc_configure(int cs, struct sam9_smc_config* config);
diff --git a/arch/arm/mach-clps711x/include/mach/dma.h b/arch/arm/mach-clps711x/include/mach/dma.h
deleted file mode 100644
index 0d620e869536..000000000000
--- a/arch/arm/mach-clps711x/include/mach/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/arch/arm/mach-clps711x/include/mach/io.h b/arch/arm/mach-clps711x/include/mach/io.h
index 4c8440087679..2e0b3ced8f07 100644
--- a/arch/arm/mach-clps711x/include/mach/io.h
+++ b/arch/arm/mach-clps711x/include/mach/io.h
@@ -20,12 +20,10 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/hardware.h>
-
 #define IO_SPACE_LIMIT 0xffffffff
 
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 /*
  * We don't support ins[lb]/outs[lb].  Make them fault.
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
index 98ec30c97bbe..e522b20bcbc2 100644
--- a/arch/arm/mach-clps711x/include/mach/memory.h
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -26,25 +26,7 @@
  */
 #define PHYS_OFFSET	UL(0xc0000000)
 
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-
-#if defined(CONFIG_ARCH_CDB89712)
-
-#define __virt_to_bus(x)	(x)
-#define __bus_to_virt(x)	(x)
-
-#elif defined (CONFIG_ARCH_AUTCPU12)
-
-#define __virt_to_bus(x)	(x)
-#define __bus_to_virt(x)	(x)
-
-#else
+#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12)
 
 #define __virt_to_bus(x)	((x) - PAGE_OFFSET)
 #define __bus_to_virt(x)	((x) + PAGE_OFFSET)
diff --git a/arch/arm/mach-clps7500/Makefile b/arch/arm/mach-clps7500/Makefile
deleted file mode 100644
index 4bd8ebd70e7b..000000000000
--- a/arch/arm/mach-clps7500/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= core.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
diff --git a/arch/arm/mach-clps7500/Makefile.boot b/arch/arm/mach-clps7500/Makefile.boot
deleted file mode 100644
index fe16506c1540..000000000000
--- a/arch/arm/mach-clps7500/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	:= 0x10008000
-
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
deleted file mode 100644
index 7e247c04d41c..000000000000
--- a/arch/arm/mach-clps7500/core.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps7500/core.c
- *
- *  Copyright (C) 1998 Russell King
- *  Copyright (C) 1999 Nexus Electronics Ltd
- *
- * Extra MM routines for CL7500 architecture
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/list.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-unsigned int vram_size;
-
-static void cl7500_ack_irq_a(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKA);
-	iomd_writeb(mask, IOMD_IRQCLRA);
-}
-
-static void cl7500_mask_irq_a(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKA);
-}
-
-static void cl7500_unmask_irq_a(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val | mask, IOMD_IRQMASKA);
-}
-
-static struct irq_chip clps7500_a_chip = {
-	.ack	= cl7500_ack_irq_a,
-	.mask	= cl7500_mask_irq_a,
-	.unmask	= cl7500_unmask_irq_a,
-};
-
-static void cl7500_mask_irq_b(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_IRQMASKB);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKB);
-}
-
-static void cl7500_unmask_irq_b(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_IRQMASKB);
-	iomd_writeb(val | mask, IOMD_IRQMASKB);
-}
-
-static struct irq_chip clps7500_b_chip = {
-	.ack	= cl7500_mask_irq_b,
-	.mask	= cl7500_mask_irq_b,
-	.unmask	= cl7500_unmask_irq_b,
-};
-
-static void cl7500_mask_irq_c(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_IRQMASKC);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKC);
-}
-
-static void cl7500_unmask_irq_c(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_IRQMASKC);
-	iomd_writeb(val | mask, IOMD_IRQMASKC);
-}
-
-static struct irq_chip clps7500_c_chip = {
-	.ack	= cl7500_mask_irq_c,
-	.mask	= cl7500_mask_irq_c,
-	.unmask	= cl7500_unmask_irq_c,
-};
-
-static void cl7500_mask_irq_d(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_IRQMASKD);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKD);
-}
-
-static void cl7500_unmask_irq_d(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_IRQMASKD);
-	iomd_writeb(val | mask, IOMD_IRQMASKD);
-}
-
-static struct irq_chip clps7500_d_chip = {
-	.ack	= cl7500_mask_irq_d,
-	.mask	= cl7500_mask_irq_d,
-	.unmask	= cl7500_unmask_irq_d,
-};
-
-static void cl7500_mask_irq_dma(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_DMAMASK);
-	iomd_writeb(val & ~mask, IOMD_DMAMASK);
-}
-
-static void cl7500_unmask_irq_dma(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_DMAMASK);
-	iomd_writeb(val | mask, IOMD_DMAMASK);
-}
-
-static struct irq_chip clps7500_dma_chip = {
-	.ack	= cl7500_mask_irq_dma,
-	.mask	= cl7500_mask_irq_dma,
-	.unmask	= cl7500_unmask_irq_dma,
-};
-
-static void cl7500_mask_irq_fiq(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_FIQMASK);
-	iomd_writeb(val & ~mask, IOMD_FIQMASK);
-}
-
-static void cl7500_unmask_irq_fiq(unsigned int irq)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (irq & 7);
-	val = iomd_readb(IOMD_FIQMASK);
-	iomd_writeb(val | mask, IOMD_FIQMASK);
-}
-
-static struct irq_chip clps7500_fiq_chip = {
-	.ack	= cl7500_mask_irq_fiq,
-	.mask	= cl7500_mask_irq_fiq,
-	.unmask	= cl7500_unmask_irq_fiq,
-};
-
-static void cl7500_no_action(unsigned int irq)
-{
-}
-
-static struct irq_chip clps7500_no_chip = {
-	.ack	= cl7500_no_action,
-	.mask	= cl7500_no_action,
-	.unmask	= cl7500_no_action,
-};
-
-static struct irqaction irq_isa = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "isa",
-};
-
-static void __init clps7500_init_irq(void)
-{
-	unsigned int irq, flags;
-
-	iomd_writeb(0, IOMD_IRQMASKA);
-	iomd_writeb(0, IOMD_IRQMASKB);
-	iomd_writeb(0, IOMD_FIQMASK);
-	iomd_writeb(0, IOMD_DMAMASK);
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		flags = IRQF_VALID;
-
-		if (irq <= 6 || (irq >= 9 && irq <= 15) ||
-		    (irq >= 48 && irq <= 55))
-			flags |= IRQF_PROBE;
-
-		switch (irq) {
-		case 0 ... 7:
-			set_irq_chip(irq, &clps7500_a_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 8 ... 15:
-			set_irq_chip(irq, &clps7500_b_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 16 ... 22:
-			set_irq_chip(irq, &clps7500_dma_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 24 ... 31:
-			set_irq_chip(irq, &clps7500_c_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 40 ... 47:
-			set_irq_chip(irq, &clps7500_d_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 48 ... 55:
-			set_irq_chip(irq, &clps7500_no_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 64 ... 72:
-			set_irq_chip(irq, &clps7500_fiq_chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-		}
-	}
-
-	setup_irq(IRQ_ISA, &irq_isa);
-}
-
-static struct map_desc cl7500_io_desc[] __initdata = {
-	{ 	/* IO space	*/
-		.virtual	= (unsigned long)IO_BASE,
-		.pfn		= __phys_to_pfn(IO_START),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* ISA space	*/
-		.virtual	= ISA_BASE,
-		.pfn		= __phys_to_pfn(ISA_START),
-		.length		= ISA_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* Flash	*/
-		.virtual	= CLPS7500_FLASH_BASE,
-		.pfn		= __phys_to_pfn(CLPS7500_FLASH_START),
-		.length		= CLPS7500_FLASH_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* LED		*/
-		.virtual	= LED_BASE,
-		.pfn		= __phys_to_pfn(LED_START),
-		.length		= LED_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init clps7500_map_io(void)
-{
-	iotable_init(cl7500_io_desc, ARRAY_SIZE(cl7500_io_desc));
-}
-
-extern void ioctime_init(void);
-extern unsigned long ioc_timer_gettimeoffset(void);
-
-static irqreturn_t
-clps7500_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-
-	/* Why not using do_leds interface?? */
-	{
-		/* Twinkle the lights. */
-		static int count, state = 0xff00;
-		if (count-- == 0) {
-			state ^= 0x100;
-			count = 25;
-			*((volatile unsigned int *)LED_ADDRESS) = state;
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction clps7500_timer_irq = {
-	.name		= "CLPS7500 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= clps7500_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt.
- */
-static void __init clps7500_timer_init(void)
-{
-	ioctime_init();
-	setup_irq(IRQ_TIMER, &clps7500_timer_irq);
-}
-
-static struct sys_timer clps7500_timer = {
-	.init		= clps7500_timer_init,
-	.offset		= ioc_timer_gettimeoffset,
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase	= 0x03010fe0,
-		.irq		= 10,
-		.uartclk	= 1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SKIP_TEST,
-	},
-	{
-		.mapbase	= 0x03010be0,
-		.irq		= 0,
-		.uartclk	= 1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SKIP_TEST,
-	},
-	{
-		.iobase		= ISASLOT_IO + 0x2e8,
-		.irq		= 41,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.iobase		= ISASLOT_IO + 0x3e8,
-		.irq		= 40,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static void __init clps7500_init(void)
-{
-	platform_device_register(&serial_device);
-}
-
-MACHINE_START(CLPS7500, "CL-PS7500")
-	/* Maintainer: Philip Blundell */
-	.phys_io	= 0x03000000,
-	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
-	.map_io		= clps7500_map_io,
-	.init_irq	= clps7500_init_irq,
-	.init_machine	= clps7500_init,
-	.timer		= &clps7500_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-clps7500/include/mach/acornfb.h b/arch/arm/mach-clps7500/include/mach/acornfb.h
deleted file mode 100644
index aea6330c9745..000000000000
--- a/arch/arm/mach-clps7500/include/mach/acornfb.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#define acornfb_valid_pixrate(var) (var->pixclock >= 39325 && var->pixclock <= 40119)
-
-static inline void
-acornfb_vidc20_find_rates(struct vidc_timing *vidc,
-			  struct fb_var_screeninfo *var)
-{
-	u_int bandwidth;
-  
-	vidc->control |= VIDC20_CTRL_PIX_CK;
-
-	/* Calculate bandwidth */
-	bandwidth = var->pixclock * 8 / var->bits_per_pixel;
-
-	/* Encode bandwidth as VIDC20 setting */
-	if (bandwidth > 16667*2)
-		vidc->control |= VIDC20_CTRL_FIFO_16;
-	else if (bandwidth > 13333*2)
-		vidc->control |= VIDC20_CTRL_FIFO_20;
-	else if (bandwidth > 11111*2)
-		vidc->control |= VIDC20_CTRL_FIFO_24;
-	else
-		vidc->control |= VIDC20_CTRL_FIFO_28;
-
-	vidc->pll_ctl  = 0x2020;
-}
-
-#ifdef CONFIG_CHRONTEL_7003
-#define acornfb_default_control()	VIDC20_CTRL_PIX_HCLK
-#else
-#define acornfb_default_control()	VIDC20_CTRL_PIX_VCLK
-#endif
-
-#define acornfb_default_econtrol()	VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3) | VIDC20_ECTL_ECK
diff --git a/arch/arm/mach-clps7500/include/mach/debug-macro.S b/arch/arm/mach-clps7500/include/mach/debug-macro.S
deleted file mode 100644
index af4104e7e84a..000000000000
--- a/arch/arm/mach-clps7500/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-clps7500/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mov	\rx, #0xe0000000
-		orr	\rx, \rx, #0x00010000
-		orr	\rx, \rx, #0x00000be0
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-clps7500/include/mach/dma.h b/arch/arm/mach-clps7500/include/mach/dma.h
deleted file mode 100644
index 63fcde505498..000000000000
--- a/arch/arm/mach-clps7500/include/mach/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/dma.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS		0xd0000000
-
-#define DMA_S0			0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-clps7500/include/mach/entry-macro.S b/arch/arm/mach-clps7500/include/mach/entry-macro.S
deleted file mode 100644
index 4e7e54144093..000000000000
--- a/arch/arm/mach-clps7500/include/mach/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
-	.equ	ioc_base_high, IOC_BASE & 0xff000000
-	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #ioc_base_high		@ point at IOC
-	.if	ioc_base_low
-	orr	\base, \base, #ioc_base_low
-	.endif
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
diff --git a/arch/arm/mach-clps7500/include/mach/hardware.h b/arch/arm/mach-clps7500/include/mach/hardware.h
deleted file mode 100644
index a6ad1d44badf..000000000000
--- a/arch/arm/mach-clps7500/include/mach/hardware.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/hardware.h
- *
- * Copyright (C) 1996-1999 Russell King.
- * Copyright (C) 1999 Nexus Electronics Ltd.
- *
- * This file contains the hardware definitions of the 
- * CL7500 evaluation board.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/memory.h>
-#include <asm/hardware/iomd.h>
-
-#ifdef __ASSEMBLY__
-#define IOMEM(x) x
-#else
-#define IOMEM(x) ((void __iomem *)(x))
-#endif
-
-/*
- * What hardware must be present
- */
-#define HAS_IOMD
-#define HAS_VIDC20
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-
-#define IO_START		0x03000000	/* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			IOMEM(0xe0000000)
-
-#define ISA_START		0x0c000000	/* ISA */
-#define ISA_SIZE		0x00010000
-#define ISA_BASE		0xe1000000
-
-#define CLPS7500_FLASH_START	0x01000000	/* XXX */
-#define CLPS7500_FLASH_SIZE	0x01000000
-#define CLPS7500_FLASH_BASE	0xe2000000
-
-#define LED_START		0x0302B000
-#define LED_SIZE		0x00001000
-#define LED_BASE		0xe3000000
-#define LED_ADDRESS		(LED_BASE + 0xa00)
-
-/* Let's define SCREEN_START for CL7500, even though it's a lie. */
-#define SCREEN_START		0x02000000	/* VRAM */
-#define SCREEN_END		0xdfc00000
-#define SCREEN_BASE		0xdf800000
-
-#define VIDC_BASE		(void __iomem *)0xe0400000
-#define IOMD_BASE		IOMEM(0xe0200000)
-#define IOC_BASE		IOMEM(0xe0200000)
-#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
-#define PCIO_BASE		IOMEM(0xe0010000)
-
-#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
-
-/* in/out bias for the ISA slot region */
-#define ISASLOT_IO		0x80400000
-
-#endif
diff --git a/arch/arm/mach-clps7500/include/mach/io.h b/arch/arm/mach-clps7500/include/mach/io.h
deleted file mode 100644
index 2ff2860889ed..000000000000
--- a/arch/arm/mach-clps7500/include/mach/io.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/io.h
- *  from arch/arm/mach-rpc/include/mach/io.h
- *
- * Copyright (C) 1997 Russell King
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * GCC is totally crap at loading/storing data.  We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o)			\
- ({						\
-	unsigned int v, r = (b);		\
-	__asm__ __volatile__(			\
-		"ldrb	%0, [%1, %2]"		\
-		: "=r" (v)			\
-		: "r" (r), "Ir" (o));		\
-	v;					\
- })
-
-#define __arch_base_getl(b,o)			\
- ({						\
-	unsigned int v, r = (b);		\
-	__asm__ __volatile__(			\
-		"ldr	%0, [%1, %2]"		\
-		: "=r" (v)			\
-		: "r" (r), "Ir" (o));		\
-	v;					\
- })
-
-#define __arch_base_putb(v,b,o)			\
- ({						\
-	unsigned int r = (b);			\
-	__asm__ __volatile__(			\
-		"strb	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (r), "Ir" (o));	\
- })
-
-#define __arch_base_putl(v,b,o)			\
- ({						\
-	unsigned int r = (b);			\
-	__asm__ __volatile__(			\
-		"str	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (r), "Ir" (o));	\
- })
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
- * and are translated to the start of IO.  Note that all addresses are
- * shifted left!
- */
-#define __PORT_PCIO(x)	(!((x) & 0x80000000))
-
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-static inline void __outb (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"strb	%1, [%0, %2, lsl #2]	@ outb"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outw (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outw"
-	: "=&r" (temp)
-	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outl (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outl"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
-static inline unsigned sz __in##fnsuffix (unsigned int port)		\
-{										\
-	unsigned long temp, value;						\
-	__asm__ __volatile__(							\
-	"tst	%2, #0x80000000\n\t"						\
-	"mov	%0, %4\n\t"							\
-	"addeq	%0, %0, %3\n\t"							\
-	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
-	: "=&r" (temp), "=r" (value)						\
-	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
-	: "cc");								\
-	return (unsigned sz)value;						\
-}
-
-static inline unsigned int __ioaddr (unsigned int port)			\
-{										\
-	if (__PORT_PCIO(port))							\
-		return (unsigned int)(PCIO_BASE + (port << 2));			\
-	else									\
-		return (unsigned int)(IO_BASE + (port << 2));			\
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr)	\
-	DECLARE_DYN_IN(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port)							\
-({										\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inbc(port)								\
-({										\
-	unsigned char result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __outwc(value,port)							\
-({										\
-	unsigned long v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inwc(port)								\
-({										\
-	unsigned short result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result & 0xffff;							\
-})
-
-#define __outlc(value,port)							\
-({										\
-	unsigned long v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (v), "r" (IO_BASE), "r" ((port) << 2));			\
-})
-
-#define __inlc(port)								\
-({										\
-	unsigned long result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __ioaddrc(port)								\
-	(__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2))
-
-#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
-#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
-#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
-#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port)			__ioaddr((port))
-
-#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
-
-#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x)	(x)
-
-#endif
diff --git a/arch/arm/mach-clps7500/include/mach/irq.h b/arch/arm/mach-clps7500/include/mach/irq.h
deleted file mode 100644
index d02fcf28ee05..000000000000
--- a/arch/arm/mach-clps7500/include/mach/irq.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/irq.h
- *
- * Copyright (C) 1996 Russell King
- * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
- *
- * Changelog:
- *   10-10-1996	RMK	Brought up to date with arch-sa110eval
- *   22-08-1998	RMK	Restructured IRQ routines
- *   11-08-1999	PJB	Created ARM7500 version, derived from RiscPC code
- */
-
-#include <linux/io.h>
-#include <asm/hardware/iomd.h>
-
-static inline int fixup_irq(unsigned int irq)
-{
-	if (irq == IRQ_ISA) {
-		int isabits = *((volatile unsigned int *)0xe002b700);
-		if (isabits == 0) {
-			printk("Spurious ISA IRQ!\n");
-			return irq;
-		}
-		irq = IRQ_ISA_BASE;
-		while (!(isabits & 1)) {
-			irq++;
-			isabits >>= 1;
-		}
-	}
-
-	return irq;
-}
diff --git a/arch/arm/mach-clps7500/include/mach/irqs.h b/arch/arm/mach-clps7500/include/mach/irqs.h
deleted file mode 100644
index bee66b487f59..000000000000
--- a/arch/arm/mach-clps7500/include/mach/irqs.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/irqs.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-#define IRQ_INT2		0
-#define IRQ_INT1		2
-#define IRQ_VSYNCPULSE		3
-#define IRQ_POWERON		4
-#define IRQ_TIMER0		5
-#define IRQ_TIMER1		6
-#define IRQ_FORCE		7
-#define IRQ_INT8		8
-#define IRQ_ISA			9
-#define IRQ_INT6		10
-#define IRQ_INT5		11
-#define IRQ_INT4		12
-#define IRQ_INT3		13
-#define IRQ_KEYBOARDTX		14
-#define IRQ_KEYBOARDRX		15
-
-#define IRQ_DMA0		16
-#define IRQ_DMA1		17
-#define IRQ_DMA2		18
-#define IRQ_DMA3		19
-#define IRQ_DMAS0		20
-#define IRQ_DMAS1		21
-
-#define IRQ_IOP0		24
-#define IRQ_IOP1		25
-#define IRQ_IOP2		26
-#define IRQ_IOP3		27
-#define IRQ_IOP4		28
-#define IRQ_IOP5		29
-#define IRQ_IOP6		30
-#define IRQ_IOP7		31
-
-#define IRQ_MOUSERX		40
-#define IRQ_MOUSETX		41
-#define IRQ_ADC			42
-#define IRQ_EVENT1		43
-#define IRQ_EVENT2		44
-
-#define IRQ_ISA_BASE		48
-#define IRQ_ISA_3		48
-#define IRQ_ISA_4		49
-#define IRQ_ISA_5		50
-#define IRQ_ISA_7		51
-#define IRQ_ISA_9		52
-#define IRQ_ISA_10		53
-#define IRQ_ISA_11		54
-#define IRQ_ISA_14		55	
-
-#define FIQ_INT9		0
-#define FIQ_INT5		1
-#define FIQ_INT6		4
-#define FIQ_INT8		6
-#define FIQ_FORCE		7
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START		64
-
-#define IRQ_TIMER		IRQ_TIMER0
diff --git a/arch/arm/mach-clps7500/include/mach/memory.h b/arch/arm/mach-clps7500/include/mach/memory.h
deleted file mode 100644
index 87b32db470c8..000000000000
--- a/arch/arm/mach-clps7500/include/mach/memory.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/memory.h
- *
- * Copyright (c) 1996,1997,1998 Russell King.
- *
- * Changelog:
- *  20-Oct-1996	RMK	Created
- *  31-Dec-1997	RMK	Fixed definitions to reduce warnings
- *  11-Jan-1998	RMK	Uninlined to reduce hits on cache
- *  08-Feb-1998	RMK	Added __virt_to_bus and __bus_to_virt
- *  21-Mar-1999	RMK	Renamed to memory.h
- *		RMK	Added TASK_SIZE and PAGE_OFFSET
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x10000000)
-
-/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x00000000
-#define FLUSH_BASE		0xdf000000
-
-/*
- * Sparsemem support.  Each section is a maximum of 64MB.  The sections
- * are offset by 128MB and can cover 128MB, so that gives us a maximum
- * of 29 physmem bits.
- */
-#define MAX_PHYSMEM_BITS	29
-#define SECTION_SIZE_BITS	26
-
-#endif
diff --git a/arch/arm/mach-clps7500/include/mach/system.h b/arch/arm/mach-clps7500/include/mach/system.h
deleted file mode 100644
index 6d325fbe8b08..000000000000
--- a/arch/arm/mach-clps7500/include/mach/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/system.h
- *
- * Copyright (c) 1999 Nexus Electronics Ltd.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <linux/io.h>
-#include <asm/hardware/iomd.h>
-
-static inline void arch_idle(void)
-{
-	iomd_writeb(0, IOMD_SUSMODE);
-}
-
-#define arch_reset(mode)			\
-	do {					\
-		iomd_writeb(0, IOMD_ROMCR0);	\
-		cpu_reset(0);			\
-	} while (0)
-
-#endif
diff --git a/arch/arm/mach-clps7500/include/mach/timex.h b/arch/arm/mach-clps7500/include/mach/timex.h
deleted file mode 100644
index dfaa9b425757..000000000000
--- a/arch/arm/mach-clps7500/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/timex.h
- *
- * CL7500 architecture timex specifications
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-/*
- * On the ARM7500, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE		2000000
-
diff --git a/arch/arm/mach-clps7500/include/mach/uncompress.h b/arch/arm/mach-clps7500/include/mach/uncompress.h
deleted file mode 100644
index d7d0af4b49fc..000000000000
--- a/arch/arm/mach-clps7500/include/mach/uncompress.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/uncompress.h
- *
- * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
- */
-#define BASE 0x03010000
-#define SERBASE (BASE + (0x2f8 << 2))
-
-static inline void putc(char c)
-{
-	while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20))
-		barrier();
-
-	*((volatile unsigned int *)(SERBASE)) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
-	int baud = 3686400 / (9600 * 32);
-
-	*((volatile unsigned int *)(SERBASE + 0xC)) = 0x80;
-	*((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff;
-	*((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8;
-	*((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */
-	*((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps7500/include/mach/vmalloc.h b/arch/arm/mach-clps7500/include/mach/vmalloc.h
deleted file mode 100644
index 8fc5406d1b6d..000000000000
--- a/arch/arm/mach-clps7500/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * arch/arm/mach-clps7500/include/mach/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/arch/arm/mach-davinci/include/mach/dma.h b/arch/arm/mach-davinci/include/mach/dma.h
deleted file mode 100644
index 8e2f2d0ba667..000000000000
--- a/arch/arm/mach-davinci/include/mach/dma.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * DaVinci DMA definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_ADDRESS			0xffffffff
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index b78ee9140496..a48795fd2417 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -29,8 +29,7 @@
  * We don't actually have real ISA nor PCI buses, but there is so many
  * drivers out there that might just work if we fake them...
  */
-#define PCIO_BASE               0
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#define __io(a)			__typesafe_io(a)
 #define __mem_pci(a)		(a)
 #define __mem_isa(a)		(a)
 
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index dd1625c23cf4..86c25c7f3ce3 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -52,13 +52,8 @@ __arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
         if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + (128<<20) - 1)
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + (128<<20))
 
 #endif
 
-/*
- * Bus address is physical address
- */
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
 #endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h
index b98bd9e92fd6..ad51625b6609 100644
--- a/arch/arm/mach-davinci/include/mach/vmalloc.h
+++ b/arch/arm/mach-davinci/include/mach/vmalloc.h
@@ -8,7 +8,6 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <asm/memory.h>
 #include <mach/io.h>
 
 /* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
diff --git a/arch/arm/mach-ebsa110/include/mach/dma.h b/arch/arm/mach-ebsa110/include/mach/dma.h
deleted file mode 100644
index 780a04c8bbe9..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/dma.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- *  arch/arm/mach-ebsa110/include/mach/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA110 DMA definitions
- */
diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
index eea4b75b657b..0ca66d080c69 100644
--- a/arch/arm/mach-ebsa110/include/mach/memory.h
+++ b/arch/arm/mach-ebsa110/include/mach/memory.h
@@ -22,13 +22,6 @@
 #define PHYS_OFFSET	UL(0x00000000)
 
 /*
- * We keep this 1:1 so that we don't interfere
- * with the PCMCIA memory regions
- */
-#define __virt_to_bus(x)	(x)
-#define __bus_to_virt(x)	(x)
-
-/*
  * Cache flushing area - SRAM
  */
 #define FLUSH_BASE_PHYS		0x40000000
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 5a1b8c05c958..56bddcef6905 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -33,6 +33,12 @@ config MACH_EDB9307
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9307 Evaluation Board.
 
+config MACH_EDB9307A
+	bool "Support Cirrus Logic EDB9307A"
+	help
+	  Say 'Y' here if you want your kernel to support the Cirrus
+	  Logic EDB9307A Evaluation Board.
+
 config MACH_EDB9312
 	bool "Support Cirrus Logic EDB9312"
 	help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index c1252ca9648e..944e42d51646 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
 obj-$(CONFIG_MACH_EDB9302)	+= edb9302.o
 obj-$(CONFIG_MACH_EDB9302A)	+= edb9302a.o
 obj-$(CONFIG_MACH_EDB9307)	+= edb9307.o
+obj-$(CONFIG_MACH_EDB9307A)	+= edb9307a.o
 obj-$(CONFIG_MACH_EDB9312)	+= edb9312.o
 obj-$(CONFIG_MACH_EDB9315)	+= edb9315.o
 obj-$(CONFIG_MACH_EDB9315A)	+= edb9315a.o
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 561db73ec1ae..3fbd9b0fbe24 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -28,8 +29,8 @@ static struct physmap_flash_data adssphere_flash_data = {
 };
 
 static struct resource adssphere_flash_resource = {
-	.start		= 0x60000000,
-	.end		= 0x61ffffff,
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -59,7 +60,7 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 8c9f2491dccc..96049283a10a 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,11 +16,12 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/io.h>
+
+#include <asm/clkdev.h>
 #include <asm/div64.h>
 #include <mach/hardware.h>
 
 struct clk {
-	char		*name;
 	unsigned long	rate;
 	int		users;
 	u32		enable_reg;
@@ -28,53 +29,33 @@ struct clk {
 };
 
 static struct clk clk_uart = {
-	.name		= "UARTCLK",
 	.rate		= 14745600,
 };
-static struct clk clk_pll1 = {
-	.name		= "pll1",
-};
-static struct clk clk_f = {
-	.name		= "fclk",
-};
-static struct clk clk_h = {
-	.name		= "hclk",
-};
-static struct clk clk_p = {
-	.name		= "pclk",
-};
-static struct clk clk_pll2 = {
-	.name		= "pll2",
-};
+static struct clk clk_pll1;
+static struct clk clk_f;
+static struct clk clk_h;
+static struct clk clk_p;
+static struct clk clk_pll2;
 static struct clk clk_usb_host = {
-	.name		= "usb_host",
 	.enable_reg	= EP93XX_SYSCON_CLOCK_CONTROL,
 	.enable_mask	= EP93XX_SYSCON_CLOCK_USH_EN,
 };
 
-
-static struct clk *clocks[] = {
-	&clk_uart,
-	&clk_pll1,
-	&clk_f,
-	&clk_h,
-	&clk_p,
-	&clk_pll2,
-	&clk_usb_host,
+#define INIT_CK(dev,con,ck)					\
+	{ .dev_id = dev, .con_id = con, .clk = ck }
+
+static struct clk_lookup clocks[] = {
+	INIT_CK("apb:uart1", NULL, &clk_uart),
+	INIT_CK("apb:uart2", NULL, &clk_uart),
+	INIT_CK("apb:uart3", NULL, &clk_uart),
+	INIT_CK(NULL, "pll1", &clk_pll1),
+	INIT_CK(NULL, "fclk", &clk_f),
+	INIT_CK(NULL, "hclk", &clk_h),
+	INIT_CK(NULL, "pclk", &clk_p),
+	INIT_CK(NULL, "pll2", &clk_pll2),
+	INIT_CK(NULL, "usb_host", &clk_usb_host),
 };
 
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(clocks); i++) {
-		if (!strcmp(clocks[i]->name, id))
-			return clocks[i];
-	}
-
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
 
 int clk_enable(struct clk *clk)
 {
@@ -106,12 +87,6 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-
 
 static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
 static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
@@ -138,6 +113,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 static int __init ep93xx_clock_init(void)
 {
 	u32 value;
+	int i;
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
 	if (!(value & 0x00800000)) {			/* PLL1 bypassed?  */
@@ -165,6 +141,8 @@ static int __init ep93xx_clock_init(void)
 		clk_f.rate / 1000000, clk_h.rate / 1000000,
 		clk_p.rate / 1000000);
 
+	for (i = 0; i < ARRAY_SIZE(clocks); i++)
+		clkdev_add(&clocks[i]);
 	return 0;
 }
 arch_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 48345fb34613..4781f323703b 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -34,6 +34,8 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -153,12 +155,14 @@ static unsigned char gpio_int_unmasked[3];
 static unsigned char gpio_int_enabled[3];
 static unsigned char gpio_int_type1[3];
 static unsigned char gpio_int_type2[3];
+static unsigned char gpio_int_debouce[3];
 
 /* Port ordering is: A B F */
 static const u8 int_type1_register_offset[3]	= { 0x90, 0xac, 0x4c };
 static const u8 int_type2_register_offset[3]	= { 0x94, 0xb0, 0x50 };
 static const u8 eoi_register_offset[3]		= { 0x98, 0xb4, 0x54 };
 static const u8 int_en_register_offset[3]	= { 0x9c, 0xb8, 0x58 };
+static const u8 int_debounce_register_offset[3]	= { 0xa8, 0xc4, 0x64 };
 
 void ep93xx_gpio_update_int_params(unsigned port)
 {
@@ -181,6 +185,22 @@ void ep93xx_gpio_int_mask(unsigned line)
 	gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
 }
 
+void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
+{
+	int line = irq_to_gpio(irq);
+	int port = line >> 3;
+	int port_mask = 1 << (line & 7);
+
+	if (enable)
+		gpio_int_debouce[port] |= port_mask;
+	else
+		gpio_int_debouce[port] &= ~port_mask;
+
+	__raw_writeb(gpio_int_debouce[port],
+		EP93XX_GPIO_REG(int_debounce_register_offset[port]));
+}
+EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
+
 /*************************************************************************
  * EP93xx IRQ handling
  *************************************************************************/
@@ -497,6 +517,26 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 	platform_device_register(&ep93xx_eth_device);
 }
 
+static struct i2c_gpio_platform_data ep93xx_i2c_data = {
+	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
+	.sda_is_open_drain	= 0,
+	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
+	.scl_is_open_drain	= 0,
+	.udelay			= 2,
+};
+
+static struct platform_device ep93xx_i2c_device = {
+	.name			= "i2c-gpio",
+	.id			= 0,
+	.dev.platform_data	= &ep93xx_i2c_data,
+};
+
+void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+{
+	i2c_register_board_info(0, devices, num);
+	platform_device_register(&ep93xx_i2c_device);
+}
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
index e4add5bdccfd..8bf8d7c78f1a 100644
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ b/arch/arm/mach-ep93xx/edb9302.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -28,8 +29,8 @@ static struct physmap_flash_data edb9302_flash_data = {
 };
 
 static struct resource edb9302_flash_resource = {
-	.start		= 0x60000000,
-	.end		= 0x60ffffff,
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -59,7 +60,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	/* Maintainer: George Kashperko <george@chas.com.ua> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
index 02c4405afed7..a352c57c7b46 100644
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ b/arch/arm/mach-ep93xx/edb9302a.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -28,8 +29,8 @@ static struct physmap_flash_data edb9302a_flash_data = {
 };
 
 static struct resource edb9302a_flash_resource = {
-	.start		= 0x60000000,
-	.end		= 0x60ffffff,
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -44,7 +45,7 @@ static struct platform_device edb9302a_flash = {
 };
 
 static struct ep93xx_eth_data edb9302a_eth_data = {
-	.phy_id			= 1,
+	.phy_id		= 1,
 };
 
 static void __init edb9302a_init_machine(void)
@@ -59,7 +60,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0xc0000100,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
index 040edbd2ea05..5ab22f63a4eb 100644
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ b/arch/arm/mach-ep93xx/edb9307.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -28,8 +29,8 @@ static struct physmap_flash_data edb9307_flash_data = {
 };
 
 static struct resource edb9307_flash_resource = {
-	.start		= 0x60000000,
-	.end		= 0x61ffffff,
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -44,7 +45,7 @@ static struct platform_device edb9307_flash = {
 };
 
 static struct ep93xx_eth_data edb9307_eth_data = {
-	.phy_id			= 1,
+	.phy_id		= 1,
 };
 
 static void __init edb9307_init_machine(void)
@@ -59,7 +60,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c
new file mode 100644
index 000000000000..5b5c22b681be
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb9307a.c
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-ep93xx/edb9307a.c
+ * Cirrus Logic EDB9307A support.
+ *
+ * Copyright (C) 2008 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9307a_flash_data = {
+	.width		= 2,
+};
+
+static struct resource edb9307a_flash_resource = {
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device edb9307a_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &edb9307a_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &edb9307a_flash_resource,
+};
+
+static struct ep93xx_eth_data edb9307a_eth_data = {
+	.phy_id		= 1,
+};
+
+static void __init edb9307a_init_machine(void)
+{
+	ep93xx_init_devices();
+	platform_device_register(&edb9307a_flash);
+
+	ep93xx_register_eth(&edb9307a_eth_data, 1);
+}
+
+MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb9307a_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
index 6853e302bc3a..d7179f66d804 100644
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ b/arch/arm/mach-ep93xx/edb9312.c
@@ -20,6 +20,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -29,8 +30,8 @@ static struct physmap_flash_data edb9312_flash_data = {
 };
 
 static struct resource edb9312_flash_resource = {
-	.start		= 0x60000000,
-	.end		= 0x61ffffff,
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -45,7 +46,7 @@ static struct platform_device edb9312_flash = {
 };
 
 static struct ep93xx_eth_data edb9312_eth_data = {
-	.phy_id			= 1,
+	.phy_id		= 1,
 };
 
 static void __init edb9312_init_machine(void)
@@ -60,7 +61,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
index 9469b350d253..025af6eaca10 100644
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ b/arch/arm/mach-ep93xx/edb9315.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -28,8 +29,8 @@ static struct physmap_flash_data edb9315_flash_data = {
 };
 
 static struct resource edb9315_flash_resource = {
-	.start		= 0x60000000,
-	.end		= 0x61ffffff,
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -44,7 +45,7 @@ static struct platform_device edb9315_flash = {
 };
 
 static struct ep93xx_eth_data edb9315_eth_data = {
-	.phy_id			= 1,
+	.phy_id		= 1,
 };
 
 static void __init edb9315_init_machine(void)
@@ -59,7 +60,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
index 584457ce7c80..4c9cc8a39f5c 100644
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ b/arch/arm/mach-ep93xx/edb9315a.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -28,8 +29,8 @@ static struct physmap_flash_data edb9315a_flash_data = {
 };
 
 static struct resource edb9315a_flash_resource = {
-	.start		= 0x60000000,
-	.end		= 0x60ffffff,
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -44,7 +45,7 @@ static struct platform_device edb9315a_flash = {
 };
 
 static struct ep93xx_eth_data edb9315a_eth_data = {
-	.phy_id			= 1,
+	.phy_id		= 1,
 };
 
 static void __init edb9315a_init_machine(void)
@@ -59,7 +60,7 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0xc0000100,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 035b24e31b64..3bad500b71b6 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -28,8 +29,8 @@ static struct physmap_flash_data gesbc9312_flash_data = {
 };
 
 static struct resource gesbc9312_flash_resource = {
-	.start		= 0x60000000,
-	.end		= 0x607fffff,
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -59,7 +60,7 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/include/mach/clkdev.h b/arch/arm/mach-ep93xx/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
deleted file mode 100644
index d0fa9656e92f..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/dma.h
- */
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
index f7020414c5df..0a1498ae899a 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -99,6 +99,8 @@
 /* maximum value for irq capable line identifiers */
 #define EP93XX_GPIO_LINE_MAX_IRQ	EP93XX_GPIO_LINE_F(7)
 
+extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
+
 /* new generic GPIO API - see Documentation/gpio.txt */
 
 #include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index 1ab9a90ad339..fd5f081cc8b7 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -4,5 +4,5 @@
 
 #define IO_SPACE_LIMIT		0xffffffff
 
-#define __io(p)			((void __iomem *)(p))
-#define __mem_pci(p)		(p)
+#define __io(p)		__typesafe_io(p)
+#define __mem_pci(p)	(p)
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index f1b633590752..5c80c3c8158d 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -7,8 +7,4 @@
 
 #define PHYS_OFFSET		UL(0x00000000)
 
-#define __bus_to_virt(x)	__phys_to_virt(x)
-#define __virt_to_bus(x)	__virt_to_phys(x)
-
-
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index db2489d3bda7..88f7e88f152f 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -14,6 +14,7 @@ void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
 void ep93xx_init_time(unsigned long);
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
+void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
 
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index c2197236b632..15d6815d78c4 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
@@ -25,7 +26,7 @@
 #include <asm/mach-types.h>
 
 static struct ep93xx_eth_data micro9_eth_data = {
-       .phy_id                 = 0x1f,
+	.phy_id		= 0x1f,
 };
 
 static void __init micro9_init(void)
@@ -38,46 +39,46 @@ static void __init micro9_init(void)
  */
 #ifdef CONFIG_MACH_MICRO9H
 static struct physmap_flash_data micro9h_flash_data = {
-       .width          = 4,
+	.width		= 4,
 };
 
 static struct resource micro9h_flash_resource = {
-       .start          = 0x10000000,
-       .end            = 0x13ffffff,
-       .flags          = IORESOURCE_MEM,
+	.start		= EP93XX_CS1_PHYS_BASE,
+	.end		= EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
+	.flags		= IORESOURCE_MEM,
 };
 
 static struct platform_device micro9h_flash = {
-       .name           = "physmap-flash",
-       .id             = 0,
-       .dev            = {
-               .platform_data  = &micro9h_flash_data,
-       },
-       .num_resources  = 1,
-       .resource       = &micro9h_flash_resource,
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &micro9h_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &micro9h_flash_resource,
 };
 
 static void __init micro9h_init(void)
 {
-       platform_device_register(&micro9h_flash);
+	platform_device_register(&micro9h_flash);
 }
 
 static void __init micro9h_init_machine(void)
 {
-       ep93xx_init_devices();
-       micro9_init();
-       micro9h_init();
+	ep93xx_init_devices();
+	micro9_init();
+	micro9h_init();
 }
 
 MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
-       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
-       .phys_io        = EP93XX_APB_PHYS_BASE,
-       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-       .boot_params    = 0x00000100,
-       .map_io         = ep93xx_map_io,
-       .init_irq       = ep93xx_init_irq,
-       .timer          = &ep93xx_timer,
-       .init_machine   = micro9h_init_machine,
+	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= micro9h_init_machine,
 MACHINE_END
 #endif
 
@@ -87,19 +88,19 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9M
 static void __init micro9m_init_machine(void)
 {
-       ep93xx_init_devices();
-       micro9_init();
+	ep93xx_init_devices();
+	micro9_init();
 }
 
 MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
-       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
-       .phys_io        = EP93XX_APB_PHYS_BASE,
-       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-       .boot_params    = 0x00000100,
-       .map_io         = ep93xx_map_io,
-       .init_irq       = ep93xx_init_irq,
-       .timer          = &ep93xx_timer,
-       .init_machine   = micro9m_init_machine,
+	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= micro9m_init_machine,
 MACHINE_END
 #endif
 
@@ -109,19 +110,19 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9L
 static void __init micro9l_init_machine(void)
 {
-       ep93xx_init_devices();
-       micro9_init();
+	ep93xx_init_devices();
+	micro9_init();
 }
 
 MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
-       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
-       .phys_io        = EP93XX_APB_PHYS_BASE,
-       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-       .boot_params    = 0x00000100,
-       .map_io         = ep93xx_map_io,
-       .init_irq       = ep93xx_init_irq,
-       .timer          = &ep93xx_timer,
-       .init_machine   = micro9l_init_machine,
+	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= micro9l_init_machine,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index b4aa4c054276..7ee024d34829 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/m48t86.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -117,7 +118,7 @@ static struct physmap_flash_data ts72xx_flash_data = {
 
 static struct resource ts72xx_flash_resource = {
 	.start		= TS72XX_NOR_PHYS_BASE,
-	.end		= TS72XX_NOR_PHYS_BASE + 0x00ffffff,
+	.end		= TS72XX_NOR_PHYS_BASE + SZ_16M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -144,21 +145,21 @@ static void ts72xx_rtc_writebyte(unsigned char value, unsigned long addr)
 }
 
 static struct m48t86_ops ts72xx_rtc_ops = {
-	.readbyte		= ts72xx_rtc_readbyte,
-	.writebyte		= ts72xx_rtc_writebyte,
+	.readbyte	= ts72xx_rtc_readbyte,
+	.writebyte	= ts72xx_rtc_writebyte,
 };
 
 static struct platform_device ts72xx_rtc_device = {
-	.name			= "rtc-m48t86",
-	.id			= -1,
-	.dev			= {
-		.platform_data		= &ts72xx_rtc_ops,
+	.name		= "rtc-m48t86",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ts72xx_rtc_ops,
 	},
-	.num_resources		= 0,
+	.num_resources	= 0,
 };
 
 static struct ep93xx_eth_data ts72xx_eth_data = {
-	.phy_id			= 1,
+	.phy_id		= 1,
 };
 
 static void __init ts72xx_init_machine(void)
@@ -175,7 +176,7 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 6a5b437ab86f..1b996b26d2e0 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/screen_info.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
 
 #include <asm/hardware/dec21285.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index 818014e09f4a..36ff06d4df15 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -14,6 +14,7 @@
 #include <linux/list.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
  
 #include <asm/pgtable.h>
 #include <asm/page.h>
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index b2a21189dd81..da35bc5c5ccc 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -7,6 +7,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/spinlock.h>
 
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index d4c1e526f59c..133086019e3e 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -17,6 +17,7 @@
 #include <linux/ioport.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
 
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c
index b653e9cfa3f7..4f3506346969 100644
--- a/arch/arm/mach-footbridge/dma.c
+++ b/arch/arm/mach-footbridge/dma.c
@@ -12,6 +12,7 @@
  */
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
 
 #include <asm/dma.h>
 #include <asm/scatterlist.h>
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index b1d3bf20a41e..30040fd588cc 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -4,6 +4,7 @@
  * EBSA285 machine fixup
  */
 #include <linux/init.h>
+#include <linux/spinlock.h>
 
 #include <asm/hardware/dec21285.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
index ffaea90486f9..51dd902043ad 100644
--- a/arch/arm/mach-footbridge/include/mach/hardware.h
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -12,8 +12,6 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include <mach/memory.h>
-
 /*   Virtual      Physical	Size
  * 0xff800000	0x40000000	1MB	X-Bus
  * 0xff000000	0x7c000000	1MB	PCI I/O space
@@ -28,9 +26,6 @@
 #define XBUS_SIZE		0x00100000
 #define XBUS_BASE		0xff800000
 
-#define PCIO_SIZE		0x00100000
-#define PCIO_BASE		0xff000000
-
 #define ARMCSR_SIZE		0x00100000
 #define ARMCSR_BASE		0xfe000000
 
@@ -91,10 +86,11 @@
 #define CPLD_FLASH_WR_ENABLE	1
 
 #ifndef __ASSEMBLY__
-extern void gpio_modify_op(int mask, int set);
-extern void gpio_modify_io(int mask, int in);
-extern int  gpio_read(void);
-extern void cpld_modify(int mask, int set);
+extern spinlock_t nw_gpio_lock;
+extern void nw_gpio_modify_op(unsigned int mask, unsigned int set);
+extern void nw_gpio_modify_io(unsigned int mask, unsigned int in);
+extern unsigned int nw_gpio_read(void);
+extern void nw_cpld_modify(unsigned int mask, unsigned int set);
 #endif
 
 #define pcibios_assign_all_busses()	1
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
index a7b066239996..101a4fe90bde 100644
--- a/arch/arm/mach-footbridge/include/mach/io.h
+++ b/arch/arm/mach-footbridge/include/mach/io.h
@@ -14,7 +14,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/hardware.h>
+#define PCIO_SIZE		0x00100000
+#define PCIO_BASE		0xff000000
 
 #define IO_SPACE_LIMIT 0xffff
 
diff --git a/arch/arm/mach-footbridge/include/mach/dma.h b/arch/arm/mach-footbridge/include/mach/isa-dma.h
index 62afd213effb..5bd4a0d338a8 100644
--- a/arch/arm/mach-footbridge/include/mach/dma.h
+++ b/arch/arm/mach-footbridge/include/mach/isa-dma.h
@@ -1,5 +1,5 @@
 /*
- *  arch/arm/mach-footbridge/include/mach/dma.h
+ *  arch/arm/mach-footbridge/include/mach/isa-dma.h
  *
  *  Architecture DMA routines
  *
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
index 6ae2f1a07ab9..cb16e59d87b6 100644
--- a/arch/arm/mach-footbridge/include/mach/memory.h
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -30,9 +30,18 @@
 extern unsigned long __virt_to_bus(unsigned long);
 extern unsigned long __bus_to_virt(unsigned long);
 #endif
+#define __virt_to_bus	__virt_to_bus
+#define __bus_to_virt	__bus_to_virt
 
 #elif defined(CONFIG_FOOTBRIDGE_HOST)
 
+/*
+ * The footbridge is programmed to expose the system RAM at the corresponding
+ * address.  So, if PAGE_OFFSET is 0xc0000000, RAM appears at 0xe0000000.
+ * If 0x80000000, then its exposed at 0xa0000000 on the bus. etc.
+ * The only requirement is that the RAM isn't placed at bus address 0 which
+ * would clash with VGA cards.
+ */
 #define __virt_to_bus(x)	((x) - 0xe0000000)
 #define __bus_to_virt(x)	((x) + 0xe0000000)
 
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index 54fec9ae28b9..9ee80a211d3c 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -19,6 +19,7 @@
 #include <linux/list.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
 
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 00b0ddcac283..ac7ffa6fc413 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -11,6 +11,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
 
 #include <asm/hardware/dec21285.h>
 #include <asm/leds.h>
@@ -67,13 +68,14 @@ static inline void wb977_ww(int reg, int val)
 /*
  * This is a lock for accessing ports GP1_IO_BASE and GP2_IO_BASE
  */
-DEFINE_SPINLOCK(gpio_lock);
+DEFINE_SPINLOCK(nw_gpio_lock);
+EXPORT_SYMBOL(nw_gpio_lock);
 
 static unsigned int current_gpio_op;
 static unsigned int current_gpio_io;
 static unsigned int current_cpld;
 
-void gpio_modify_op(int mask, int set)
+void nw_gpio_modify_op(unsigned int mask, unsigned int set)
 {
 	unsigned int new_gpio, changed;
 
@@ -86,6 +88,7 @@ void gpio_modify_op(int mask, int set)
 	if (changed & 0xff00)
 		outb(new_gpio >> 8, GP2_IO_BASE);
 }
+EXPORT_SYMBOL(nw_gpio_modify_op);
 
 static inline void __gpio_modify_io(int mask, int in)
 {
@@ -118,7 +121,7 @@ static inline void __gpio_modify_io(int mask, int in)
 	}
 }
 
-void gpio_modify_io(int mask, int in)
+void nw_gpio_modify_io(unsigned int mask, unsigned int in)
 {
 	/* Open up the SuperIO chip */
 	wb977_open();
@@ -128,11 +131,13 @@ void gpio_modify_io(int mask, int in)
 	/* Close up the EFER gate */
 	wb977_close();
 }
+EXPORT_SYMBOL(nw_gpio_modify_io);
 
-int gpio_read(void)
+unsigned int nw_gpio_read(void)
 {
 	return inb(GP1_IO_BASE) | inb(GP2_IO_BASE) << 8;
 }
+EXPORT_SYMBOL(nw_gpio_read);
 
 /*
  * Initialise the Winbond W83977F global registers
@@ -322,9 +327,9 @@ static inline void wb977_init_gpio(void)
 	/*
 	 * Set Group1/Group2 outputs
 	 */
-	spin_lock_irqsave(&gpio_lock, flags);
-	gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN);
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	nw_gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
 }
 
 /*
@@ -359,34 +364,35 @@ static void __init wb977_init(void)
 	wb977_close();
 }
 
-void cpld_modify(int mask, int set)
+void nw_cpld_modify(unsigned int mask, unsigned int set)
 {
 	int msk;
 
 	current_cpld = (current_cpld & ~mask) | set;
 
-	gpio_modify_io(GPIO_DATA | GPIO_IOCLK | GPIO_IOLOAD, 0);
-	gpio_modify_op(GPIO_IOLOAD, 0);
+	nw_gpio_modify_io(GPIO_DATA | GPIO_IOCLK | GPIO_IOLOAD, 0);
+	nw_gpio_modify_op(GPIO_IOLOAD, 0);
 
 	for (msk = 8; msk; msk >>= 1) {
 		int bit = current_cpld & msk;
 
-		gpio_modify_op(GPIO_DATA | GPIO_IOCLK, bit ? GPIO_DATA : 0);
-		gpio_modify_op(GPIO_IOCLK, GPIO_IOCLK);
+		nw_gpio_modify_op(GPIO_DATA | GPIO_IOCLK, bit ? GPIO_DATA : 0);
+		nw_gpio_modify_op(GPIO_IOCLK, GPIO_IOCLK);
 	}
 
-	gpio_modify_op(GPIO_IOCLK|GPIO_DATA, 0);
-	gpio_modify_op(GPIO_IOLOAD|GPIO_DSCLK, GPIO_IOLOAD|GPIO_DSCLK);
-	gpio_modify_op(GPIO_IOLOAD, 0);
+	nw_gpio_modify_op(GPIO_IOCLK|GPIO_DATA, 0);
+	nw_gpio_modify_op(GPIO_IOLOAD|GPIO_DSCLK, GPIO_IOLOAD|GPIO_DSCLK);
+	nw_gpio_modify_op(GPIO_IOLOAD, 0);
 }
+EXPORT_SYMBOL(nw_cpld_modify);
 
 static void __init cpld_init(void)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&gpio_lock, flags);
-	cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE);
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	nw_cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
 }
 
 static unsigned char rwa_unlock[] __initdata =
@@ -596,12 +602,6 @@ static void __init rwa010_init(void)
 	rwa010_soundblaster_reset();
 }
 
-EXPORT_SYMBOL(gpio_lock);
-EXPORT_SYMBOL(gpio_modify_op);
-EXPORT_SYMBOL(gpio_modify_io);
-EXPORT_SYMBOL(cpld_modify);
-EXPORT_SYMBOL(gpio_read);
-
 /*
  * Initialise any other hardware after we've got the PCI bus
  * initialised.  We may need the PCI bus to talk to this other
@@ -616,9 +616,9 @@ static int __init nw_hw_init(void)
 		cpld_init();
 		rwa010_init();
 
-		spin_lock_irqsave(&gpio_lock, flags);
-		gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
-		spin_unlock_irqrestore(&gpio_lock, flags);
+		spin_lock_irqsave(&nw_gpio_lock, flags);
+		nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
+		spin_unlock_irqrestore(&nw_gpio_lock, flags);
 	}
 	return 0;
 }
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
index d91a4f4a32dc..00269fe0be8a 100644
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ b/arch/arm/mach-footbridge/netwinder-leds.c
@@ -32,7 +32,6 @@ static char led_state;
 static char hw_led_state;
 
 static DEFINE_SPINLOCK(leds_lock);
-extern spinlock_t gpio_lock;
 
 static void netwinder_leds_event(led_event_t evt)
 {
@@ -121,9 +120,9 @@ static void netwinder_leds_event(led_event_t evt)
 	spin_unlock_irqrestore(&leds_lock, flags);
 
 	if  (led_state & LED_STATE_ENABLED) {
-		spin_lock_irqsave(&gpio_lock, flags);
-		gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
-		spin_unlock_irqrestore(&gpio_lock, flags);
+		spin_lock_irqsave(&nw_gpio_lock, flags);
+		nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
+		spin_unlock_irqrestore(&nw_gpio_lock, flags);
 	}
 }
 
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index c4f843fc099d..e2c9f0690b16 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -4,6 +4,7 @@
  * Personal server (Skiff) machine fixup
  */
 #include <linux/init.h>
+#include <linux/spinlock.h>
 
 #include <asm/hardware/dec21285.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-h720x/include/mach/io.h b/arch/arm/mach-h720x/include/mach/io.h
index 1dab74ce88c6..2c8659c21a93 100644
--- a/arch/arm/mach-h720x/include/mach/io.h
+++ b/arch/arm/mach-h720x/include/mach/io.h
@@ -14,11 +14,9 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/hardware.h>
-
 #define IO_SPACE_LIMIT 0xffffffff
 
-#define __io(a)		((void __iomem *)(a))
+#define __io(a)		__typesafe_io(a)
 #define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-h720x/include/mach/dma.h b/arch/arm/mach-h720x/include/mach/isa-dma.h
index 0a9d86ee84fe..3eafb3f163c0 100644
--- a/arch/arm/mach-h720x/include/mach/dma.h
+++ b/arch/arm/mach-h720x/include/mach/isa-dma.h
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-h720x/include/mach/dma.h
+ * arch/arm/mach-h720x/include/mach/isa-dma.h
  *
  * Architecture DMA routes
  *
@@ -8,13 +8,6 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS		0xd0000000
-
 #if defined (CONFIG_CPU_H7201)
 #define MAX_DMA_CHANNELS	3
 #elif defined (CONFIG_CPU_H7202)
diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
index cb26f49cc4e1..ef4c1e26f18e 100644
--- a/arch/arm/mach-h720x/include/mach/memory.h
+++ b/arch/arm/mach-h720x/include/mach/memory.h
@@ -7,23 +7,13 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-/*
- * Page offset:
- *    ( 0xc0000000UL )
- */
 #define PHYS_OFFSET	UL(0x40000000)
-
 /*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- *
- * There is something to do here later !, Mar 2000, Jungjun Kim
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
  */
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_256M - 1)
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_256M)
 
 #endif
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
index c10810c936b3..1536583eece0 100644
--- a/arch/arm/mach-imx/dma.c
+++ b/arch/arm/mach-imx/dma.c
@@ -28,10 +28,11 @@
 #include <linux/interrupt.h>
 #include <linux/errno.h>
 
+#include <asm/scatterlist.h>
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
 #include <mach/imx-dma.h>
 
 struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
@@ -138,7 +139,7 @@ imx_dma_setup_sg_base(imx_dmach_t dma_ch,
 int
 imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
 		     unsigned int dma_length, unsigned int dev_addr,
-		     dmamode_t dmamode)
+		     unsigned int dmamode)
 {
 	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
 
@@ -223,7 +224,7 @@ imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
 int
 imx_dma_setup_sg(imx_dmach_t dma_ch,
 		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-		 unsigned int dev_addr, dmamode_t dmamode)
+		 unsigned int dev_addr, unsigned int dmamode)
 {
 	int res;
 	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
index 44d89c35539a..bbe54df7f0de 100644
--- a/arch/arm/mach-imx/include/mach/imx-dma.h
+++ b/arch/arm/mach-imx/include/mach/imx-dma.h
@@ -18,7 +18,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 
 #ifndef __ASM_ARCH_IMX_DMA_H
 #define __ASM_ARCH_IMX_DMA_H
@@ -48,7 +48,7 @@ struct imx_dma_channel {
 	void (*irq_handler) (int, void *);
 	void (*err_handler) (int, void *, int errcode);
 	void *data;
-	dmamode_t  dma_mode;
+	unsigned int  dma_mode;
 	struct scatterlist *sg;
 	unsigned int sgbc;
 	unsigned int sgcount;
@@ -66,14 +66,18 @@ extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
 /* The type to distinguish channel numbers parameter from ordinal int type */
 typedef int imx_dmach_t;
 
+#define DMA_MODE_READ		0
+#define DMA_MODE_WRITE		1
+#define DMA_MODE_MASK		1
+
 int
 imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-		unsigned int dma_length, unsigned int dev_addr, dmamode_t dmamode);
+		unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode);
 
 int
 imx_dma_setup_sg(imx_dmach_t dma_ch,
 		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-		 unsigned int dev_addr, dmamode_t dmamode);
+		 unsigned int dev_addr, unsigned int dmamode);
 
 int
 imx_dma_setup_handlers(imx_dmach_t dma_ch,
diff --git a/arch/arm/mach-imx/include/mach/imxfb.h b/arch/arm/mach-imx/include/mach/imxfb.h
index 3ed9ec8b9f00..870d0d939616 100644
--- a/arch/arm/mach-imx/include/mach/imxfb.h
+++ b/arch/arm/mach-imx/include/mach/imxfb.h
@@ -1,7 +1,52 @@
 /*
  * This structure describes the machine which we are running on.
  */
-struct imxfb_mach_info {
+
+#define PCR_TFT		(1 << 31)
+#define PCR_COLOR	(1 << 30)
+#define PCR_PBSIZ_1	(0 << 28)
+#define PCR_PBSIZ_2	(1 << 28)
+#define PCR_PBSIZ_4	(2 << 28)
+#define PCR_PBSIZ_8	(3 << 28)
+#define PCR_BPIX_1	(0 << 25)
+#define PCR_BPIX_2	(1 << 25)
+#define PCR_BPIX_4	(2 << 25)
+#define PCR_BPIX_8	(3 << 25)
+#define PCR_BPIX_12	(4 << 25)
+#define PCR_BPIX_16	(4 << 25)
+#define PCR_PIXPOL	(1 << 24)
+#define PCR_FLMPOL	(1 << 23)
+#define PCR_LPPOL	(1 << 22)
+#define PCR_CLKPOL	(1 << 21)
+#define PCR_OEPOL	(1 << 20)
+#define PCR_SCLKIDLE	(1 << 19)
+#define PCR_END_SEL	(1 << 18)
+#define PCR_END_BYTE_SWAP (1 << 17)
+#define PCR_REV_VS	(1 << 16)
+#define PCR_ACD_SEL	(1 << 15)
+#define PCR_ACD(x)	(((x) & 0x7f) << 8)
+#define PCR_SCLK_SEL	(1 << 7)
+#define PCR_SHARP	(1 << 6)
+#define PCR_PCD(x)	((x) & 0x3f)
+
+#define PWMR_CLS(x)	(((x) & 0x1ff) << 16)
+#define PWMR_LDMSK	(1 << 15)
+#define PWMR_SCR1	(1 << 10)
+#define PWMR_SCR0	(1 << 9)
+#define PWMR_CC_EN	(1 << 8)
+#define PWMR_PW(x)	((x) & 0xff)
+
+#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
+#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
+#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
+#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
+#define LSCR1_GRAY1(x)            (((x) & 0xf))
+
+#define DMACR_BURST	(1 << 31)
+#define DMACR_HM(x)	(((x) & 0xf) << 16)
+#define DMACR_TM(x)	((x) & 0xf)
+
+struct imx_fb_platform_data {
 	u_long		pixclock;
 
 	u_short		xres;
@@ -34,4 +79,5 @@ struct imxfb_mach_info {
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
 };
-void set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info);
+
+void set_imx_fb_info(struct imx_fb_platform_data *);
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-imx/include/mach/io.h
index c50c5fa6fb81..9e197ae4590f 100644
--- a/arch/arm/mach-imx/include/mach/io.h
+++ b/arch/arm/mach-imx/include/mach/io.h
@@ -20,11 +20,9 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/hardware.h>
-
 #define IO_SPACE_LIMIT 0xffffffff
 
-#define __io(a)		((void __iomem *)(a))
+#define __io(a)		__typesafe_io(a)
 #define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-imx/include/mach/memory.h
index 5c453063c0ed..a93df7cba694 100644
--- a/arch/arm/mach-imx/include/mach/memory.h
+++ b/arch/arm/mach-imx/include/mach/memory.h
@@ -23,14 +23,4 @@
 
 #define PHYS_OFFSET	UL(0x08000000)
 
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(x - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x)	(x - PHYS_OFFSET + PAGE_OFFSET)
-
 #endif
diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/mach-integrator/clock.c
index 8d761fdd2ecd..989ecf5f5c46 100644
--- a/arch/arm/mach-integrator/clock.c
+++ b/arch/arm/mach-integrator/clock.c
@@ -10,42 +10,12 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/list.h>
 #include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
 
-#include <asm/hardware/icst525.h>
-
-#include "clock.h"
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
+#include <asm/clkdev.h>
+#include <mach/clkdev.h>
 
 int clk_enable(struct clk *clk)
 {
@@ -67,7 +37,6 @@ EXPORT_SYMBOL(clk_get_rate);
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
 	struct icst525_vco vco;
-
 	vco = icst525_khz_to_vco(clk->params, rate / 1000);
 	return icst525_khz(clk->params, vco) * 1000;
 }
@@ -76,56 +45,15 @@ EXPORT_SYMBOL(clk_round_rate);
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	int ret = -EIO;
+
 	if (clk->setvco) {
 		struct icst525_vco vco;
 
 		vco = icst525_khz_to_vco(clk->params, rate / 1000);
 		clk->rate = icst525_khz(clk->params, vco) * 1000;
-
-		printk("Clock %s: setting VCO reg params: S=%d R=%d V=%d\n",
-			clk->name, vco.s, vco.r, vco.v);
-
 		clk->setvco(clk, vco);
 		ret = 0;
 	}
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * These are fixed clocks.
- */
-static struct clk kmi_clk = {
-	.name	= "KMIREFCLK",
-	.rate	= 24000000,
-};
-
-static struct clk uart_clk = {
-	.name	= "UARTCLK",
-	.rate	= 14745600,
-};
-
-int clk_register(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-static int __init clk_init(void)
-{
-	clk_register(&kmi_clk);
-	clk_register(&uart_clk);
-	return 0;
-}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-integrator/clock.h b/arch/arm/mach-integrator/clock.h
index 09e6328ceba9..e69de29bb2d1 100644
--- a/arch/arm/mach-integrator/clock.h
+++ b/arch/arm/mach-integrator/clock.h
@@ -1,25 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/clock.h
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct module;
-struct icst525_params;
-
-struct clk {
-	struct list_head	node;
-	unsigned long		rate;
-	struct module		*owner;
-	const char		*name;
-	const struct icst525_params *params;
-	void			*data;
-	void			(*setvco)(struct clk *, struct icst525_vco vco);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 595b7392ee4e..c89c949b4d45 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -21,6 +21,8 @@
 #include <linux/amba/serial.h>
 #include <linux/io.h>
 
+#include <asm/clkdev.h>
+#include <mach/clkdev.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/hardware/arm_timer.h>
@@ -108,10 +110,43 @@ static struct amba_device *amba_devs[] __initdata = {
 	&kmi1_device,
 };
 
+/*
+ * These are fixed clocks.
+ */
+static struct clk clk24mhz = {
+	.rate	= 24000000,
+};
+
+static struct clk uartclk = {
+	.rate	= 14745600,
+};
+
+static struct clk_lookup lookups[] __initdata = {
+	{	/* UART0 */
+		.dev_id		= "mb:16",
+		.clk		= &uartclk,
+	}, {	/* UART1 */
+		.dev_id		= "mb:17",
+		.clk		= &uartclk,
+	}, {	/* KMI0 */
+		.dev_id		= "mb:18",
+		.clk		= &clk24mhz,
+	}, {	/* KMI1 */
+		.dev_id		= "mb:19",
+		.clk		= &clk24mhz,
+	}, {	/* MMCI - IntegratorCP */
+		.dev_id		= "mb:1c",
+		.clk		= &uartclk,
+	}
+};
+
 static int __init integrator_init(void)
 {
 	int i;
 
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 172299a78302..0058c937719e 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -22,13 +22,13 @@
 #include <linux/amba/clcd.h>
 #include <linux/io.h>
 
+#include <asm/clkdev.h>
+#include <mach/clkdev.h>
 #include <asm/hardware/icst525.h>
 #include <mach/lm.h>
 #include <mach/impd1.h>
 #include <asm/sizes.h>
 
-#include "clock.h"
-
 static int module_id;
 
 module_param_named(lmid, module_id, int, 0444);
@@ -37,6 +37,7 @@ MODULE_PARM_DESC(lmid, "logic module stack position");
 struct impd1_module {
 	void __iomem	*base;
 	struct clk	vcos[2];
+	struct clk_lookup *clks[3];
 };
 
 static const struct icst525_params impd1_vco_params = {
@@ -339,9 +340,8 @@ static struct impd1_device impd1_devs[] = {
 	}
 };
 
-static const char *impd1_vconames[2] = {
-	"CLCDCLK",
-	"AUXVCO2",
+static struct clk fixed_14745600 = {
+	.rate = 14745600,
 };
 
 static int impd1_probe(struct lm_device *dev)
@@ -374,14 +374,20 @@ static int impd1_probe(struct lm_device *dev)
 
 	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
 		impd1->vcos[i].owner = THIS_MODULE,
-		impd1->vcos[i].name = impd1_vconames[i],
 		impd1->vcos[i].params = &impd1_vco_params,
 		impd1->vcos[i].data = impd1,
 		impd1->vcos[i].setvco = impd1_setvco;
-
-		clk_register(&impd1->vcos[i]);
 	}
 
+	impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
+					dev->id);
+	impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100",
+					dev->id);
+	impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200",
+					dev->id);
+	for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
+		clkdev_add(impd1->clks[i]);
+
 	for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
 		struct impd1_device *idev = impd1_devs + i;
 		struct amba_device *d;
@@ -434,8 +440,8 @@ static void impd1_remove(struct lm_device *dev)
 
 	device_for_each_child(&dev->dev, NULL, impd1_remove_one);
 
-	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++)
-		clk_unregister(&impd1->vcos[i]);
+	for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
+		clkdev_drop(impd1->clks[i]);
 
 	lm_set_drvdata(dev, NULL);
 
diff --git a/arch/arm/mach-integrator/include/mach/clkdev.h b/arch/arm/mach-integrator/include/mach/clkdev.h
new file mode 100644
index 000000000000..9293e410832a
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/clkdev.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#include <linux/module.h>
+#include <asm/hardware/icst525.h>
+
+struct clk {
+	unsigned long		rate;
+	struct module		*owner;
+	const struct icst525_params *params;
+	void			*data;
+	void			(*setvco)(struct clk *, struct icst525_vco vco);
+};
+
+static inline int __clk_get(struct clk *clk)
+{
+	return try_module_get(clk->owner);
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
index be7e63c21d25..2b2e7a110724 100644
--- a/arch/arm/mach-integrator/include/mach/memory.h
+++ b/arch/arm/mach-integrator/include/mach/memory.h
@@ -24,16 +24,9 @@
  * Physical DRAM offset.
  */
 #define PHYS_OFFSET	UL(0x00000000)
-#define BUS_OFFSET	UL(0x80000000)
 
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(x - PAGE_OFFSET + BUS_OFFSET)
-#define __bus_to_virt(x)	(x - BUS_OFFSET + PAGE_OFFSET)
+#define BUS_OFFSET	UL(0x80000000)
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET + BUS_OFFSET)
+#define __bus_to_virt(x)	((x) - BUS_OFFSET + PAGE_OFFSET)
 
 #endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 88026ccd5ac9..427c2d8dc123 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -21,6 +21,8 @@
 #include <linux/amba/clcd.h>
 #include <linux/io.h>
 
+#include <asm/clkdev.h>
+#include <mach/clkdev.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -38,7 +40,6 @@
 #include <asm/mach/time.h>
 
 #include "common.h"
-#include "clock.h"
 
 #define INTCP_PA_MMC_BASE		0x1c000000
 #define INTCP_PA_AACI_BASE		0x1d000000
@@ -289,15 +290,16 @@ static void cp_auxvco_set(struct clk *clk, struct icst525_vco vco)
 	writel(0, CM_LOCK);
 }
 
-static struct clk cp_clcd_clk = {
-	.name	= "CLCDCLK",
+static struct clk cp_auxclk = {
 	.params	= &cp_auxvco_params,
 	.setvco = cp_auxvco_set,
 };
 
-static struct clk cp_mmci_clk = {
-	.name	= "MCLK",
-	.rate	= 14745600,
+static struct clk_lookup cp_lookups[] = {
+	{	/* CLCD */
+		.dev_id		= "mb:c0",
+		.clk		= &cp_auxclk,
+	},
 };
 
 /*
@@ -554,8 +556,8 @@ static void __init intcp_init(void)
 {
 	int i;
 
-	clk_register(&cp_clcd_clk);
-	clk_register(&cp_mmci_clk);
+	for (i = 0; i < ARRAY_SIZE(cp_lookups); i++)
+		clkdev_add(&cp_lookups[i]);
 
 	platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
 
diff --git a/arch/arm/mach-iop13xx/include/mach/dma.h b/arch/arm/mach-iop13xx/include/mach/dma.h
deleted file mode 100644
index d79846fbb394..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#ifndef _IOP13XX_DMA_H
-#define _IOP13XX_DMA_H
-#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index b82602d529bf..e012bf13c955 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -16,18 +16,6 @@
 #define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
 #define IOP13XX_PMMR_P_END   (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
 
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-
-/* RAM has 1:1 mapping on the PCIe/x Busses */
-#define __virt_to_bus(x)	(__virt_to_phys(x))
-#define __bus_to_virt(x)	(__phys_to_virt(x))
-
 static inline dma_addr_t __virt_to_lbus(unsigned long x)
 {
 	return x + IOP13XX_PMMR_PHYS_MEM_BASE - IOP13XX_PMMR_VIRT_MEM_BASE;
@@ -55,7 +43,7 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x)
 		if (is_lbus_device(dev) && __is_lbus_dma(__dma))	\
 			__virt = __lbus_to_virt(__dma);			\
 		else							\
-			__virt = __bus_to_virt(__dma);			\
+			__virt = __phys_to_virt(__dma);			\
 		(void *)__virt;						\
 	})
 
@@ -66,7 +54,7 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x)
 		if (is_lbus_device(dev) && __is_lbus_virt(__virt))	\
 			__dma = __virt_to_lbus(__virt);			\
 		else							\
-			__dma = __virt_to_bus(__virt);			\
+			__dma = __virt_to_phys(__virt);			\
 		__dma;							\
 	})
 
diff --git a/arch/arm/mach-iop13xx/include/mach/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h
index 5b1f1c8a8270..45fb2745bb54 100644
--- a/arch/arm/mach-iop13xx/include/mach/timex.h
+++ b/arch/arm/mach-iop13xx/include/mach/timex.h
@@ -1,3 +1 @@
-#include <mach/hardware.h>
-
 #define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-iop32x/include/mach/dma.h b/arch/arm/mach-iop32x/include/mach/dma.h
deleted file mode 100644
index f8bd817f205d..000000000000
--- a/arch/arm/mach-iop32x/include/mach/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/dma.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h
index ce54705ba3d4..339e5854728b 100644
--- a/arch/arm/mach-iop32x/include/mach/io.h
+++ b/arch/arm/mach-iop32x/include/mach/io.h
@@ -11,7 +11,7 @@
 #ifndef __IO_H
 #define __IO_H
 
-#include <mach/hardware.h>
+#include <asm/hardware/iop3xx.h>
 
 extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
 	unsigned int mtype);
diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h
index 42cd4bf3148c..c30f6450ad50 100644
--- a/arch/arm/mach-iop32x/include/mach/memory.h
+++ b/arch/arm/mach-iop32x/include/mach/memory.h
@@ -5,22 +5,9 @@
 #ifndef __MEMORY_H
 #define __MEMORY_H
 
-#include <mach/hardware.h>
-
 /*
  * Physical DRAM offset.
  */
 #define PHYS_OFFSET	UL(0xa0000000)
 
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(__virt_to_phys(x))
-#define __bus_to_virt(x)	(__phys_to_virt(x))
-
-
 #endif
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
index 20f923e54f46..32d9e5b0a28d 100644
--- a/arch/arm/mach-iop32x/include/mach/system.h
+++ b/arch/arm/mach-iop32x/include/mach/system.h
@@ -7,8 +7,9 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <asm/mach-types.h>
+#include <asm/hardware/iop3xx.h>
+#include <mach/n2100.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-iop32x/include/mach/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h
index a541afced3cb..7262ab81419d 100644
--- a/arch/arm/mach-iop32x/include/mach/timex.h
+++ b/arch/arm/mach-iop32x/include/mach/timex.h
@@ -3,7 +3,4 @@
  *
  * IOP32x architecture timex specifications
  */
-
-#include <mach/hardware.h>
-
 #define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-iop33x/include/mach/dma.h b/arch/arm/mach-iop33x/include/mach/dma.h
deleted file mode 100644
index d8b42232931d..000000000000
--- a/arch/arm/mach-iop33x/include/mach/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/dma.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h
index 158874631217..e99a7ed6d050 100644
--- a/arch/arm/mach-iop33x/include/mach/io.h
+++ b/arch/arm/mach-iop33x/include/mach/io.h
@@ -11,7 +11,7 @@
 #ifndef __IO_H
 #define __IO_H
 
-#include <mach/hardware.h>
+#include <asm/hardware/iop3xx.h>
 
 extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
 	unsigned int mtype);
diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h
index 2cef0bbb354f..a30a96aa6d2d 100644
--- a/arch/arm/mach-iop33x/include/mach/memory.h
+++ b/arch/arm/mach-iop33x/include/mach/memory.h
@@ -5,22 +5,9 @@
 #ifndef __MEMORY_H
 #define __MEMORY_H
 
-#include <mach/hardware.h>
-
 /*
  * Physical DRAM offset.
  */
 #define PHYS_OFFSET	UL(0x00000000)
 
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(__virt_to_phys(x))
-#define __bus_to_virt(x)	(__phys_to_virt(x))
-
-
 #endif
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
index 7bf3bfb49446..0cb3ad862acd 100644
--- a/arch/arm/mach-iop33x/include/mach/system.h
+++ b/arch/arm/mach-iop33x/include/mach/system.h
@@ -7,6 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <asm/hardware/iop3xx.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-iop33x/include/mach/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h
index c75760844d49..54c589091d6e 100644
--- a/arch/arm/mach-iop33x/include/mach/timex.h
+++ b/arch/arm/mach-iop33x/include/mach/timex.h
@@ -3,7 +3,4 @@
  *
  * IOP3xx architecture timex specifications
  */
-
-#include <mach/hardware.h>
-
 #define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-ixp2000/include/mach/dma.h b/arch/arm/mach-ixp2000/include/mach/dma.h
deleted file mode 100644
index 26063d60f622..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/dma.h
- *
- * Copyright (C) 2002 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h
index 241529a7c52d..aee7eb8a71b2 100644
--- a/arch/arm/mach-ixp2000/include/mach/memory.h
+++ b/arch/arm/mach-ixp2000/include/mach/memory.h
@@ -15,13 +15,6 @@
 
 #define PHYS_OFFSET	UL(0x00000000)
 
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
 #include <mach/ixp2000-regs.h>
 
 #define __virt_to_bus(v) \
diff --git a/arch/arm/mach-ixp23xx/include/mach/dma.h b/arch/arm/mach-ixp23xx/include/mach/dma.h
deleted file mode 100644
index 8886544b93f7..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/dma.h
- */
diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h
index 305ea1808c71..fd9ef8e519f7 100644
--- a/arch/arm/mach-ixp23xx/include/mach/io.h
+++ b/arch/arm/mach-ixp23xx/include/mach/io.h
@@ -20,8 +20,6 @@
 #define __io(p)		((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
 #define __mem_pci(a)	(a)
 
-#include <linux/kernel.h>	/* For BUG */
-
 static inline void __iomem *
 ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
 {
diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h
index 9d40115f7ebe..fdd138706c70 100644
--- a/arch/arm/mach-ixp23xx/include/mach/memory.h
+++ b/arch/arm/mach-ixp23xx/include/mach/memory.h
@@ -19,16 +19,6 @@
  */
 #define PHYS_OFFSET		(0x00000000)
 
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#ifndef __ASSEMBLY__
-
 #define __virt_to_bus(v)						\
 	({ unsigned int ret;						\
 	ret = ((__virt_to_phys(v) - 0x00000000) +			\
@@ -43,6 +33,3 @@
 #define arch_is_coherent()	1
 
 #endif
-
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/dma.h b/arch/arm/mach-ixp4xx/include/mach/dma.h
deleted file mode 100644
index 00c5070c0201..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/dma.h
- *
- * Copyright (C) 2001-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/device.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-
-#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index 319948e31bec..ce63048d45eb 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -49,8 +49,6 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
 
 #else
 
-#include <linux/mm.h>
-
 /*
  * In the case of using indirect PCI, we simply return the actual PCI
  * address and our read/write implementation use that to drive the 
@@ -241,7 +239,7 @@ __ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
 
 #ifndef CONFIG_PCI
 
-#define	__io(v)		v
+#define	__io(v)		__typesafe_io(v)
 
 #else
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
index c4d2830ac987..98f5e5e20980 100644
--- a/arch/arm/mach-ixp4xx/include/mach/memory.h
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -22,19 +22,8 @@ void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
 	ixp4xx_adjust_zones(node, size, holes)
 
 #define ISA_DMA_THRESHOLD (SZ_64M - 1)
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
 
 #endif
 
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- *
- * These are dummies for now.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
 #endif
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 0bb1fbd84ccb..7b8ef97fb501 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -57,6 +57,7 @@ void __init kirkwood_map_io(void)
  ****************************************************************************/
 static struct orion_ehci_data kirkwood_ehci_data = {
 	.dram		= &kirkwood_mbus_dram_info,
+	.phy_version	= EHCI_PHY_NA,
 };
 
 static u64 ehci_dmamask = 0xffffffffUL;
@@ -153,6 +154,64 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 
 
 /*****************************************************************************
+ * GE01
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data kirkwood_ge01_shared_data = {
+	.dram		= &kirkwood_mbus_dram_info,
+	.shared_smi	= &kirkwood_ge00_shared,
+};
+
+static struct resource kirkwood_ge01_shared_resources[] = {
+	{
+		.name	= "ge01 base",
+		.start	= GE01_PHYS_BASE + 0x2000,
+		.end	= GE01_PHYS_BASE + 0x3fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "ge01 err irq",
+		.start	= IRQ_KIRKWOOD_GE01_ERR,
+		.end	= IRQ_KIRKWOOD_GE01_ERR,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_ge01_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &kirkwood_ge01_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(kirkwood_ge01_shared_resources),
+	.resource	= kirkwood_ge01_shared_resources,
+};
+
+static struct resource kirkwood_ge01_resources[] = {
+	{
+		.name	= "ge01 irq",
+		.start	= IRQ_KIRKWOOD_GE01_SUM,
+		.end	= IRQ_KIRKWOOD_GE01_SUM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kirkwood_ge01 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 1,
+	.num_resources	= 1,
+	.resource	= kirkwood_ge01_resources,
+};
+
+void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &kirkwood_ge01_shared;
+	kirkwood_ge01.dev.platform_data = eth_data;
+
+	platform_device_register(&kirkwood_ge01_shared);
+	platform_device_register(&kirkwood_ge01);
+}
+
+
+/*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
 static struct resource kirkwood_switch_resources[] = {
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 5774632a67e3..fe367c18e722 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -30,6 +30,7 @@ void kirkwood_pcie_id(u32 *dev, u32 *rev);
 
 void kirkwood_ehci_init(void);
 void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
 void kirkwood_pcie_init(void);
 void kirkwood_rtc_init(void);
diff --git a/arch/arm/mach-kirkwood/include/mach/dma.h b/arch/arm/mach-kirkwood/include/mach/dma.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-kirkwood/include/mach/gpio.h b/arch/arm/mach-kirkwood/include/mach/gpio.h
new file mode 100644
index 000000000000..81b335eb62ec
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/gpio.h
@@ -0,0 +1,38 @@
+/*
+ * arch/asm-arm/mach-kirkwood/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+#define GPIO_MAX		50
+#define GPIO_OFF(pin)		(((pin) >> 5) ? 0x0140 : 0x0100)
+#define GPIO_OUT(pin)		(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x00)
+#define GPIO_IO_CONF(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x04)
+#define GPIO_BLINK_EN(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x08)
+#define GPIO_IN_POL(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x0c)
+#define GPIO_DATA_IN(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin)	(DEV_BUS_VIRT_BASE + GPIO_OFF(pin) + 0x1c)
+
+static inline int gpio_to_irq(int pin)
+{
+	return pin + IRQ_KIRKWOOD_GPIO_START;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+	return irq - IRQ_KIRKWOOD_GPIO_START;
+}
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
index ffab89f21c11..f00a0a45a67e 100644
--- a/arch/arm/mach-kirkwood/include/mach/irqs.h
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -11,8 +11,6 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include "kirkwood.h"	/* need GPIO_MAX */
-
 /*
  * Low Interrupt Controller
  */
@@ -51,12 +49,13 @@
 #define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
 #define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
 #define IRQ_KIRKWOOD_GE00_ERR	46
+#define IRQ_KIRKWOOD_GE01_ERR	47
 
 /*
  * KIRKWOOD General Purpose Pins
  */
 #define IRQ_KIRKWOOD_GPIO_START	64
-#define NR_GPIO_IRQS		GPIO_MAX
+#define NR_GPIO_IRQS		50
 
 #define NR_IRQS			(IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
 
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index eae42406fd86..ada480c0e197 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -117,7 +117,4 @@
 #define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
 
 
-#define GPIO_MAX		50
-
-
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h
index b5fb34bdccd5..45431e131465 100644
--- a/arch/arm/mach-kirkwood/include/mach/memory.h
+++ b/arch/arm/mach-kirkwood/include/mach/memory.h
@@ -7,8 +7,4 @@
 
 #define PHYS_OFFSET		UL(0x00000000)
 
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
 #endif
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 5790643ffe07..efb86b700276 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -13,10 +13,45 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <plat/irq.h>
+#include <asm/gpio.h>
 #include "common.h"
 
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	BUG_ON(irq < IRQ_KIRKWOOD_GPIO_LOW_0_7);
+	BUG_ON(irq > IRQ_KIRKWOOD_GPIO_HIGH_16_23);
+
+	orion_gpio_irq_handler((irq - IRQ_KIRKWOOD_GPIO_LOW_0_7) << 3);
+}
+
 void __init kirkwood_init_irq(void)
 {
+	int i;
+
 	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
 	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+
+	/*
+	 * Mask and clear GPIO IRQ interrupts.
+	 */
+	writel(0, GPIO_LEVEL_MASK(0));
+	writel(0, GPIO_EDGE_MASK(0));
+	writel(0, GPIO_EDGE_CAUSE(0));
+	writel(0, GPIO_LEVEL_MASK(32));
+	writel(0, GPIO_EDGE_MASK(32));
+	writel(0, GPIO_EDGE_CAUSE(32));
+
+	for (i = IRQ_KIRKWOOD_GPIO_START; i < NR_IRQS; i++) {
+		set_irq_chip(i, &orion_gpio_irq_level_chip);
+		set_irq_handler(i, handle_level_irq);
+		irq_desc[i].status |= IRQ_LEVEL;
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23, gpio_irq_handler);
 }
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 175054abd630..9a0e905d10cd 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -80,24 +80,38 @@ static struct dsa_platform_data rd88f6281_switch_data = {
 	.port_names[1]	= "lan2",
 	.port_names[2]	= "lan3",
 	.port_names[3]	= "lan4",
-	.port_names[4]	= "wan",
 	.port_names[5]	= "cpu",
 };
 
+static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
+};
+
 static struct mv_sata_platform_data rd88f6281_sata_data = {
 	.n_ports	= 2,
 };
 
 static void __init rd88f6281_init(void)
 {
+	u32 dev, rev;
+
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
 	kirkwood_init();
 
 	kirkwood_ehci_init();
+
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
+	kirkwood_pcie_id(&dev, &rev);
+	if (rev == MV88F6281_REV_A0) {
+		rd88f6281_switch_data.sw_addr = 10;
+		kirkwood_ge01_init(&rd88f6281_ge01_data);
+	} else {
+		rd88f6281_switch_data.port_names[4] = "wan";
+	}
 	kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
+
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6281_sata_data);
 	kirkwood_uart0_init();
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
index ce1cf8de2b4d..2754daabda55 100644
--- a/arch/arm/mach-ks8695/Kconfig
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -8,6 +8,12 @@ config MACH_KS8695
 	  Say 'Y' here if you want your kernel to run on the original
 	  Kendin-Micrel KS8695 development board.
 
+config MACH_DSM320
+	bool "DSM-320 Wireless Media Player"
+	help
+	  Say 'Y' here if you want your kernel to run on the D-Link
+	  DSM-320 Wireless Media Player.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index ade42b73afbb..f735d2cc0294 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_LEDS)		+= leds.o
 
 # Board-specific support
 obj-$(CONFIG_MACH_KS8695)	+= board-micrel.o
+obj-$(CONFIG_MACH_DSM320)	+= board-dsm320.o
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
new file mode 100644
index 000000000000..521ff0789f39
--- /dev/null
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -0,0 +1,131 @@
+/*
+ * arch/arm/mach-ks8695/board-dsm320.c
+ *
+ * DSM-320 D-Link Wireless Media Player, board support.
+ *
+ * Copyright 2008 Simtec Electronics
+ *		  Daniel Silverstone <dsilvers@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/devices.h>
+#include <mach/gpio.h>
+
+#include "generic.h"
+
+#ifdef CONFIG_PCI
+static int dsm320_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	switch (slot) {
+	case 0:
+		/* PCI-AHB bridge? */
+		return KS8695_IRQ_EXTERN0;
+	case 18:
+		/* Mini PCI slot */
+		return KS8695_IRQ_EXTERN2;
+	case 20:
+		/* RealMAGIC chip */
+		return KS8695_IRQ_EXTERN0;
+	}
+	BUG();
+}
+
+static struct ks8695_pci_cfg __initdata dsm320_pci = {
+	.mode		= KS8695_MODE_MINIPCI,
+	.map_irq	= dsm320_pci_map_irq,
+};
+
+static void __init dsm320_register_pci(void)
+{
+	/* Initialise the GPIO lines for interrupt mode */
+	/* RealMAGIC */
+	ks8695_gpio_interrupt(KS8695_GPIO_0, IRQ_TYPE_LEVEL_LOW);
+	/* MiniPCI Slot */
+	ks8695_gpio_interrupt(KS8695_GPIO_2, IRQ_TYPE_LEVEL_LOW);
+
+	ks8695_init_pci(&dsm320_pci);
+}
+
+#else
+static inline void __init dsm320_register_pci(void) { }
+#endif
+
+static struct physmap_flash_data dsm320_nor_pdata = {
+	.width		= 4,
+	.nr_parts	= 0,
+};
+
+static struct resource dsm320_nor_resource[] = {
+	[0] = {
+		.start = SZ_32M, /* We expect the bootloader to map
+				  * the flash here.
+				  */
+		.end   = SZ_32M + SZ_4M - 1,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device dsm320_device_nor = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dsm320_nor_resource),
+	.resource	= dsm320_nor_resource,
+	.dev		= {
+		.platform_data = &dsm320_nor_pdata,
+	},
+};
+
+void __init dsm320_register_nor(void)
+{
+	int ret;
+
+	ret = platform_device_register(&dsm320_device_nor);
+	if (ret < 0)
+		printk(KERN_ERR "failed to register physmap-flash device\n");
+}
+
+static void __init dsm320_init(void)
+{
+	/* GPIO registration */
+	ks8695_register_gpios();
+
+	/* PCI registration */
+	dsm320_register_pci();
+
+	/* Network device */
+	ks8695_add_device_lan();	/* eth0 = LAN */
+
+	/* NOR devices */
+	dsm320_register_nor();
+}
+
+MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
+	/* Maintainer: Simtec Electronics. */
+	.phys_io	= KS8695_IO_PA,
+	.io_pg_offst	= (KS8695_IO_VA >> 18) & 0xfffc,
+	.boot_params	= KS8695_SDRAM_PA + 0x100,
+	.map_io		= ks8695_map_io,
+	.init_irq	= ks8695_init_irq,
+	.init_machine	= dsm320_init,
+	.timer		= &ks8695_timer,
+MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 0468e93b7d3b..8ceaf5ac6e2c 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -18,6 +18,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/gpio.h>
 #include <mach/devices.h>
 
 #include "generic.h"
@@ -39,6 +40,8 @@ static void __init micrel_init(void)
 {
 	printk(KERN_INFO "Micrel KS8695 Development Board initializing\n");
 
+	ks8695_register_gpios();
+
 #ifdef CONFIG_PCI
 	ks8695_init_pci(&micrel_pci);
 #endif
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 4bd251482c8f..36ab0fd3d9b6 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -25,19 +25,20 @@
 #include <mach/regs-wan.h>
 #include <mach/regs-lan.h>
 #include <mach/regs-hpna.h>
+#include <mach/regs-switch.h>
+#include <mach/regs-misc.h>
 
 
 /* --------------------------------------------------------------------
  *  Ethernet
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_ARM_KS8695_ETHER) || defined(CONFIG_ARM_KS8695_ETHER_MODULE)
 static u64 eth_dmamask = 0xffffffffUL;
 
 static struct resource ks8695_wan_resources[] = {
 	[0] = {
-		.start	= KS8695_WAN_VA,
-		.end	= KS8695_WAN_VA + 0x00ff,
+		.start	= KS8695_WAN_PA,
+		.end	= KS8695_WAN_PA + 0x00ff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -58,6 +59,12 @@ static struct resource ks8695_wan_resources[] = {
 		.end	= KS8695_IRQ_WAN_LINK,
 		.flags	= IORESOURCE_IRQ,
 	},
+	[4] = {
+		.name	= "WAN PHY",
+		.start	= KS8695_MISC_PA,
+		.end	= KS8695_MISC_PA + 0x1f,
+		.flags	= IORESOURCE_MEM,
+	},
 };
 
 static struct platform_device ks8695_wan_device = {
@@ -74,8 +81,8 @@ static struct platform_device ks8695_wan_device = {
 
 static struct resource ks8695_lan_resources[] = {
 	[0] = {
-		.start	= KS8695_LAN_VA,
-		.end	= KS8695_LAN_VA + 0x00ff,
+		.start	= KS8695_LAN_PA,
+		.end	= KS8695_LAN_PA + 0x00ff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -90,6 +97,12 @@ static struct resource ks8695_lan_resources[] = {
 		.end	= KS8695_IRQ_LAN_TX_STATUS,
 		.flags	= IORESOURCE_IRQ,
 	},
+	[3] = {
+		.name	= "LAN SWITCH",
+		.start	= KS8695_SWITCH_PA,
+		.end	= KS8695_SWITCH_PA + 0x4f,
+		.flags	= IORESOURCE_MEM,
+	},
 };
 
 static struct platform_device ks8695_lan_device = {
@@ -106,8 +119,8 @@ static struct platform_device ks8695_lan_device = {
 
 static struct resource ks8695_hpna_resources[] = {
 	[0] = {
-		.start	= KS8695_HPNA_VA,
-		.end	= KS8695_HPNA_VA + 0x00ff,
+		.start	= KS8695_HPNA_PA,
+		.end	= KS8695_HPNA_PA + 0x00ff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -149,18 +162,12 @@ void __init ks8696_add_device_hpna(void)
 {
 	platform_device_register(&ks8695_hpna_device);
 }
-#else
-void __init ks8695_add_device_wan(void) {}
-void __init ks8695_add_device_lan(void) {}
-void __init ks8696_add_device_hpna(void) {}
-#endif
 
 
 /* --------------------------------------------------------------------
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_KS8695_WATCHDOG) || defined(CONFIG_KS8695_WATCHDOG_MODULE)
 static struct platform_device ks8695_wdt_device = {
 	.name		= "ks8695_wdt",
 	.id		= -1,
@@ -171,9 +178,6 @@ static void __init ks8695_add_device_watchdog(void)
 {
 	platform_device_register(&ks8695_wdt_device);
 }
-#else
-static void __init ks8695_add_device_watchdog(void) {}
-#endif
 
 
 /* --------------------------------------------------------------------
@@ -190,7 +194,7 @@ void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
 	gpio_direction_output(cpu_led, 1);
 	gpio_direction_output(timer_led, 1);
 
-	ks8695_leds_cpu   = cpu_led;
+	ks8695_leds_cpu	  = cpu_led;
 	ks8695_leds_timer = timer_led;
 }
 #else
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index 9aecf0c4b8b1..55fbf7111a5b 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -2,6 +2,8 @@
  * arch/arm/mach-ks8695/gpio.c
  *
  * Copyright (C) 2006 Andrew Victor
+ * Updated to GPIOLIB, Copyright 2008 Simtec Electronics
+ *                     Daniel Silverstone <dsilvers@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -35,7 +37,7 @@
  * Configure a GPIO line for either GPIO function, or its internal
  * function (Interrupt, Timer, etc).
  */
-static void __init_or_module ks8695_gpio_mode(unsigned int pin, short gpio)
+static void ks8695_gpio_mode(unsigned int pin, short gpio)
 {
 	unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
 	unsigned long x, flags;
@@ -61,7 +63,7 @@ static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8
 /*
  * Configure GPIO pin as external interrupt source.
  */
-int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
+int ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
 {
 	unsigned long x, flags;
 
@@ -94,7 +96,7 @@ EXPORT_SYMBOL(ks8695_gpio_interrupt);
 /*
  * Configure the GPIO line as an input.
  */
-int __init_or_module gpio_direction_input(unsigned int pin)
+static int ks8695_gpio_direction_input(struct gpio_chip *gc, unsigned int pin)
 {
 	unsigned long x, flags;
 
@@ -115,13 +117,13 @@ int __init_or_module gpio_direction_input(unsigned int pin)
 
 	return 0;
 }
-EXPORT_SYMBOL(gpio_direction_input);
 
 
 /*
  * Configure the GPIO line as an output, with default state.
  */
-int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state)
+static int ks8695_gpio_direction_output(struct gpio_chip *gc,
+					unsigned int pin, int state)
 {
 	unsigned long x, flags;
 
@@ -150,13 +152,13 @@ int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state)
 
 	return 0;
 }
-EXPORT_SYMBOL(gpio_direction_output);
 
 
 /*
  * Set the state of an output GPIO line.
  */
-void gpio_set_value(unsigned int pin, unsigned int state)
+static void ks8695_gpio_set_value(struct gpio_chip *gc,
+				  unsigned int pin, int state)
 {
 	unsigned long x, flags;
 
@@ -175,13 +177,12 @@ void gpio_set_value(unsigned int pin, unsigned int state)
 
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(gpio_set_value);
 
 
 /*
  * Read the state of a GPIO line.
  */
-int gpio_get_value(unsigned int pin)
+static int ks8695_gpio_get_value(struct gpio_chip *gc, unsigned int pin)
 {
 	unsigned long x;
 
@@ -191,21 +192,18 @@ int gpio_get_value(unsigned int pin)
 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
 	return (x & IOPD(pin)) != 0;
 }
-EXPORT_SYMBOL(gpio_get_value);
 
 
 /*
  * Map GPIO line to IRQ number.
  */
-int gpio_to_irq(unsigned int pin)
+static int ks8695_gpio_to_irq(struct gpio_chip *gc, unsigned int pin)
 {
 	if (pin > KS8695_GPIO_3)	/* only GPIO 0..3 can generate IRQ */
 		return -EINVAL;
 
 	return gpio_irq[pin];
 }
-EXPORT_SYMBOL(gpio_to_irq);
-
 
 /*
  * Map IRQ number to GPIO line.
@@ -219,6 +217,26 @@ int irq_to_gpio(unsigned int irq)
 }
 EXPORT_SYMBOL(irq_to_gpio);
 
+/* GPIOLIB interface */
+
+static struct gpio_chip ks8695_gpio_chip = {
+	.label			= "KS8695",
+	.direction_input	= ks8695_gpio_direction_input,
+	.direction_output	= ks8695_gpio_direction_output,
+	.get			= ks8695_gpio_get_value,
+	.set			= ks8695_gpio_set_value,
+	.to_irq			= ks8695_gpio_to_irq,
+	.base			= 0,
+	.ngpio			= 16,
+	.can_sleep		= 0,
+};
+
+/* Register the GPIOs */
+void ks8695_register_gpios(void)
+{
+	if (gpiochip_add(&ks8695_gpio_chip))
+		printk(KERN_ERR "Unable to register core GPIOs\n");
+}
 
 /* .... Debug interface ..................................................... */
 
diff --git a/arch/arm/mach-ks8695/include/mach/dma.h b/arch/arm/mach-ks8695/include/mach/dma.h
deleted file mode 100644
index 561206280089..000000000000
--- a/arch/arm/mach-ks8695/include/mach/dma.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/dma.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
index d4af5c335f16..86312d476bc6 100644
--- a/arch/arm/mach-ks8695/include/mach/gpio.h
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -30,53 +30,28 @@
 #define KS8695_GPIO_14		14
 #define KS8695_GPIO_15		15
 
-
 /*
  * Configure GPIO pin as external interrupt source.
  */
-int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
-
-/*
- * Configure the GPIO line as an input.
- */
-int __init_or_module gpio_direction_input(unsigned int pin);
-
-/*
- * Configure the GPIO line as an output, with default state.
- */
-int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
-
-/*
- * Set the state of an output GPIO line.
- */
-void gpio_set_value(unsigned int pin, unsigned int state);
-
-/*
- * Read the state of a GPIO line.
- */
-int gpio_get_value(unsigned int pin);
-
-/*
- * Map GPIO line to IRQ number.
- */
-int gpio_to_irq(unsigned int pin);
+extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
 
 /*
  * Map IRQ number to GPIO line.
  */
-int irq_to_gpio(unsigned int irq);
-
+extern int irq_to_gpio(unsigned int irq);
 
 #include <asm-generic/gpio.h>
 
-static inline int gpio_request(unsigned int pin, const char *label)
-{
-	return 0;
-}
+/* If it turns out that we need to optimise GPIO access for the
+ * Micrel's GPIOs, then these can be changed to check their argument
+ * directly as static inlines. However for now it's probably not
+ * worthwhile.
+ */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_to_irq __gpio_to_irq
 
-static inline void gpio_free(unsigned int pin)
-{
-	might_sleep();
-}
+/* Register the GPIOs */
+extern void ks8695_register_gpios(void);
 
 #endif
diff --git a/arch/arm/mach-ks8695/include/mach/io.h b/arch/arm/mach-ks8695/include/mach/io.h
index f364f24ffe1e..a7a63ac3ba4e 100644
--- a/arch/arm/mach-ks8695/include/mach/io.h
+++ b/arch/arm/mach-ks8695/include/mach/io.h
@@ -13,7 +13,7 @@
 
 #define IO_SPACE_LIMIT		0xffffffff
 
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 8fbc4c76c38b..6d5887cf5742 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -37,11 +37,6 @@ extern struct bus_type platform_bus_type;
 					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
 #define __arch_page_to_dma(dev, x)	__arch_virt_to_dma(dev, page_address(x))
 
-#else
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
 #endif
 
 #endif
diff --git a/arch/arm/mach-l7200/include/mach/dma.h b/arch/arm/mach-l7200/include/mach/dma.h
deleted file mode 100644
index c7e48bd4590c..000000000000
--- a/arch/arm/mach-l7200/include/mach/dma.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/dma.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  08-29-2000	SJH	Created
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS         0xd0000000
-
-#define DMA_S0                  0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-l7200/include/mach/io.h b/arch/arm/mach-l7200/include/mach/io.h
index d432ba9e5dff..a770a89fb708 100644
--- a/arch/arm/mach-l7200/include/mach/io.h
+++ b/arch/arm/mach-l7200/include/mach/io.h
@@ -10,18 +10,12 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/hardware.h>
-
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
  * There are not real ISA nor PCI buses, so we fake it.
  */
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)	__io(a)
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-l7200/include/mach/memory.h b/arch/arm/mach-l7200/include/mach/memory.h
index f338cf3ffd93..9fb40ed2f03b 100644
--- a/arch/arm/mach-l7200/include/mach/memory.h
+++ b/arch/arm/mach-l7200/include/mach/memory.h
@@ -17,9 +17,6 @@
  */
 #define PHYS_OFFSET     UL(0xf0000000)
 
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
 /*
  * Cache flushing area - ROM
  */
diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c
index 4fb23ac6b5ac..6182f5410b4d 100644
--- a/arch/arm/mach-lh7a40x/clocks.c
+++ b/arch/arm/mach-lh7a40x/clocks.c
@@ -14,21 +14,14 @@
 #include <linux/err.h>
 
 struct module;
-struct icst525_params;
 
 struct clk {
 	struct list_head node;
 	unsigned long rate;
 	struct module *owner;
 	const char *name;
-//	void *data;
-//	const struct icst525_params *params;
-//	void (*setvco)(struct clk *, struct icst525_vco vco);
 };
 
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
 /* ----- */
 
 #define MAINDIV1(c)	(((c) >>  7) & 0x0f)
@@ -79,31 +72,15 @@ unsigned int pclkfreq_get (void)
 
 /* ----- */
 
-static LIST_HEAD(clocks);
-static DECLARE_MUTEX(clocks_sem);
-
 struct clk *clk_get (struct device *dev, const char *id)
 {
-	struct clk *p;
-	struct clk *clk = ERR_PTR(-ENOENT);
-
-	down (&clocks_sem);
-	list_for_each_entry (p, &clocks, node) {
-		if (strcmp (id, p->name) == 0
-		    && try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-	up (&clocks_sem);
-
-	return clk;
+	return dev && strcmp(dev_name(dev), "cldc-lh7a40x") == 0
+		 ? NULL : ERR_PTR(-ENOENT);
 }
 EXPORT_SYMBOL(clk_get);
 
 void clk_put (struct clk *clk)
 {
-	module_put(clk->owner);
 }
 EXPORT_SYMBOL(clk_put);
 
@@ -118,20 +95,9 @@ void clk_disable (struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
-int clk_use (struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_use);
-
-void clk_unuse (struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_unuse);
-
 unsigned long clk_get_rate (struct clk *clk)
 {
-	return clk->rate;
+	return 0;
 }
 EXPORT_SYMBOL(clk_get_rate);
 
@@ -143,56 +109,6 @@ EXPORT_SYMBOL(clk_round_rate);
 
 int clk_set_rate (struct clk *clk, unsigned long rate)
 {
-	int ret = -EIO;
-	return ret;
+	return -EIO;
 }
 EXPORT_SYMBOL(clk_set_rate);
-
-#if 0
-/*
- * These are fixed clocks.
- */
-static struct clk kmi_clk = {
-	.name	= "KMIREFCLK",
-	.rate	= 24000000,
-};
-
-static struct clk uart_clk = {
-	.name	= "UARTCLK",
-	.rate	= 24000000,
-};
-
-static struct clk mmci_clk = {
-	.name	= "MCLK",
-	.rate	= 33000000,
-};
-#endif
-
-static struct clk clcd_clk = {
-	.name	= "CLCDCLK",
-	.rate	= 0,
-};
-
-int clk_register (struct clk *clk)
-{
-	down (&clocks_sem);
-	list_add (&clk->node, &clocks);
-	up (&clocks_sem);
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister (struct clk *clk)
-{
-	down (&clocks_sem);
-	list_del (&clk->node);
-	up (&clocks_sem);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-static int __init clk_init (void)
-{
-	clk_register(&clcd_clk);
-	return 0;
-}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-lh7a40x/include/mach/io.h b/arch/arm/mach-lh7a40x/include/mach/io.h
index 031d26f9163c..6ece45911cbc 100644
--- a/arch/arm/mach-lh7a40x/include/mach/io.h
+++ b/arch/arm/mach-lh7a40x/include/mach/io.h
@@ -11,12 +11,10 @@
 #ifndef __ASM_ARCH_IO_H
 #define __ASM_ARCH_IO_H
 
-#include <mach/hardware.h>
-
 #define IO_SPACE_LIMIT 0xffffffff
 
 /* No ISA or PCI bus on this machine. */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
index 1da14ff66c93..189d20e543e7 100644
--- a/arch/arm/mach-lh7a40x/include/mach/memory.h
+++ b/arch/arm/mach-lh7a40x/include/mach/memory.h
@@ -19,16 +19,6 @@
  */
 #define PHYS_OFFSET	UL(0xc0000000)
 
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
 #ifdef CONFIG_DISCONTIGMEM
 
 /*
diff --git a/arch/arm/mach-loki/include/mach/dma.h b/arch/arm/mach-loki/include/mach/dma.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-loki/include/mach/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-loki/include/mach/memory.h b/arch/arm/mach-loki/include/mach/memory.h
index a39533ab489d..2ed7e6e732c2 100644
--- a/arch/arm/mach-loki/include/mach/memory.h
+++ b/arch/arm/mach-loki/include/mach/memory.h
@@ -7,8 +7,4 @@
 
 #define PHYS_OFFSET		UL(0x00000000)
 
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
 #endif
diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h
index c6a2feb268b0..aab964591db4 100644
--- a/arch/arm/mach-msm/include/mach/io.h
+++ b/arch/arm/mach-msm/include/mach/io.h
@@ -23,11 +23,7 @@
 
 void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype);
 
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)         __io(a)
+#define __io(a)		__typesafe_io(a)
 #define __mem_pci(a)    (a)
 
 #endif
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
index 63fd47f2e62e..f4698baec976 100644
--- a/arch/arm/mach-msm/include/mach/memory.h
+++ b/arch/arm/mach-msm/include/mach/memory.h
@@ -19,9 +19,5 @@
 /* physical offset of RAM */
 #define PHYS_OFFSET		UL(0x10000000)
 
-/* bus address and physical addresses are identical */
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
 #endif
 
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 238a2f8c2d52..b0e4e0d8f506 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -167,6 +167,7 @@ void __init mv78xx0_map_io(void)
  ****************************************************************************/
 static struct orion_ehci_data mv78xx0_ehci_data = {
 	.dram		= &mv78xx0_mbus_dram_info,
+	.phy_version	= EHCI_PHY_NA,
 };
 
 static u64 ehci_dmamask = 0xffffffffUL;
diff --git a/arch/arm/mach-mv78xx0/include/mach/dma.h b/arch/arm/mach-mv78xx0/include/mach/dma.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-mv78xx0/include/mach/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-mv78xx0/include/mach/gpio.h b/arch/arm/mach-mv78xx0/include/mach/gpio.h
new file mode 100644
index 000000000000..d9d1535ea100
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/gpio.h
@@ -0,0 +1,40 @@
+/*
+ * arch/asm-arm/mach-mv78xx0/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+extern int mv78xx0_core_index(void);
+
+#define GPIO_MAX		32
+#define GPIO_OUT(pin)		(DEV_BUS_VIRT_BASE + 0x0100)
+#define GPIO_IO_CONF(pin)	(DEV_BUS_VIRT_BASE + 0x0104)
+#define GPIO_BLINK_EN(pin)	(DEV_BUS_VIRT_BASE + 0x0108)
+#define GPIO_IN_POL(pin)	(DEV_BUS_VIRT_BASE + 0x010c)
+#define GPIO_DATA_IN(pin)	(DEV_BUS_VIRT_BASE + 0x0110)
+#define GPIO_EDGE_CAUSE(pin)	(DEV_BUS_VIRT_BASE + 0x0114)
+#define GPIO_MASK_OFF		(mv78xx0_core_index() ? 0x18 : 0)
+#define GPIO_EDGE_MASK(pin)	(DEV_BUS_VIRT_BASE + 0x0118 + GPIO_MASK_OFF)
+#define GPIO_LEVEL_MASK(pin)	(DEV_BUS_VIRT_BASE + 0x011c + GPIO_MASK_OFF)
+
+static inline int gpio_to_irq(int pin)
+{
+	return pin + IRQ_MV78XX0_GPIO_START;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+	return irq - IRQ_MV78XX0_GPIO_START;
+}
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/include/mach/irqs.h
index bebc330281ec..fa1d422196c2 100644
--- a/arch/arm/mach-mv78xx0/include/mach/irqs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/irqs.h
@@ -11,8 +11,6 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include "mv78xx0.h"	/* need GPIO_MAX */
-
 /*
  * MV78xx0 Low Interrupt Controller
  */
@@ -88,7 +86,7 @@
  * MV78XX0 General Purpose Pins
  */
 #define IRQ_MV78XX0_GPIO_START	96
-#define NR_GPIO_IRQS		GPIO_MAX
+#define NR_GPIO_IRQS		32
 
 #define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
 
diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h
index 9e47a140ff7a..e663042d307f 100644
--- a/arch/arm/mach-mv78xx0/include/mach/memory.h
+++ b/arch/arm/mach-mv78xx0/include/mach/memory.h
@@ -7,8 +7,4 @@
 
 #define PHYS_OFFSET		UL(0x00000000)
 
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
 #endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index ee9c5593ee92..e930ea5330a2 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -122,7 +122,4 @@
 #define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
 
 
-#define GPIO_MAX		32
-
-
 #endif
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 503e5d195ae5..e273418797b4 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -11,13 +11,42 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/gpio.h>
 #include <mach/mv78xx0.h>
 #include <plat/irq.h>
 #include "common.h"
 
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	BUG_ON(irq < IRQ_MV78XX0_GPIO_0_7 || irq > IRQ_MV78XX0_GPIO_24_31);
+
+	orion_gpio_irq_handler((irq - IRQ_MV78XX0_GPIO_0_7) << 3);
+}
+
 void __init mv78xx0_init_irq(void)
 {
+	int i;
+
 	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
 	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
 	orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
+
+	/*
+	 * Mask and clear GPIO IRQ interrupts.
+	 */
+	writel(0, GPIO_LEVEL_MASK(0));
+	writel(0, GPIO_EDGE_MASK(0));
+	writel(0, GPIO_EDGE_CAUSE(0));
+
+	for (i = IRQ_MV78XX0_GPIO_START; i < NR_IRQS; i++) {
+		set_irq_chip(i, &orion_gpio_irq_level_chip);
+		set_irq_handler(i, handle_level_irq);
+		irq_desc[i].status |= IRQ_LEVEL;
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_MV78XX0_GPIO_24_31, gpio_irq_handler);
 }
diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig
new file mode 100644
index 000000000000..2b59fc74784f
--- /dev/null
+++ b/arch/arm/mach-mx1/Kconfig
@@ -0,0 +1,14 @@
+if ARCH_MX1
+
+comment "MX1 Platforms"
+
+config MACH_MXLADS
+	bool
+
+config ARCH_MX1ADS
+	bool "MX1ADS platform"
+	select MACH_MXLADS
+	help
+	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
+
+endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
new file mode 100644
index 000000000000..b969719011fa
--- /dev/null
+++ b/arch/arm/mach-mx1/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y			+= generic.o clock.o devices.o
+
+# Specific board support
+obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
diff --git a/arch/arm/mach-mx1/Makefile.boot b/arch/arm/mach-mx1/Makefile.boot
new file mode 100644
index 000000000000..8ed1492288a2
--- /dev/null
+++ b/arch/arm/mach-mx1/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x08008000
+params_phys-y	:= 0x08000100
+initrd_phys-y	:= 0x08800000
+
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
new file mode 100644
index 000000000000..4bcd1ece55f5
--- /dev/null
+++ b/arch/arm/mach-mx1/clock.c
@@ -0,0 +1,656 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/math64.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include "crm_regs.h"
+
+static int _clk_enable(struct clk *clk)
+{
+	unsigned int reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+	unsigned int reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_can_use_parent(const struct clk *clk_arr[], unsigned int size,
+			       struct clk *parent)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		if (parent == clk_arr[i])
+			return i;
+
+	return -EINVAL;
+}
+
+static unsigned long
+_clk_simple_round_rate(struct clk *clk, unsigned long rate, unsigned int limit)
+{
+	int div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > limit)
+		div = limit;
+
+	return parent_rate / div;
+}
+
+static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->round_rate(clk->parent, rate);
+}
+
+static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->set_rate(clk->parent, rate);
+}
+
+/*
+ *  get the system pll clock in Hz
+ *
+ *                  mfi + mfn / (mfd +1)
+ *  f = 2 * f_ref * --------------------
+ *                        pd + 1
+ */
+static unsigned long mx1_decode_pll(unsigned int pll, u32 f_ref)
+{
+	unsigned long long ll;
+	unsigned long quot;
+
+	u32 mfi = (pll >> 10) & 0xf;
+	u32 mfn = pll & 0x3ff;
+	u32 mfd = (pll >> 16) & 0x3ff;
+	u32 pd =  (pll >> 26) & 0xf;
+
+	mfi = mfi <= 5 ? 5 : mfi;
+
+	ll = 2 * (unsigned long long)f_ref *
+		((mfi << 16) + (mfn << 16) / (mfd + 1));
+	quot = (pd + 1) * (1 << 16);
+	ll += quot / 2;
+	do_div(ll, quot);
+	return (unsigned long)ll;
+}
+
+static unsigned long clk16m_get_rate(struct clk *clk)
+{
+	return 16000000;
+}
+
+static struct clk clk16m = {
+	.name = "CLK16M",
+	.get_rate = clk16m_get_rate,
+	.enable = _clk_enable,
+	.enable_reg = CCM_CSCR,
+	.enable_shift = CCM_CSCR_OSC_EN_SHIFT,
+	.disable = _clk_disable,
+};
+
+/* in Hz */
+static unsigned long clk32_rate;
+
+static unsigned long clk32_get_rate(struct clk *clk)
+{
+	return clk32_rate;
+}
+
+static struct clk clk32 = {
+	.name = "CLK32",
+	.get_rate = clk32_get_rate,
+};
+
+static unsigned long clk32_premult_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) * 512;
+}
+
+static struct clk clk32_premult = {
+	.name = "CLK32_premultiplier",
+	.parent = &clk32,
+	.get_rate = clk32_premult_get_rate,
+};
+
+static const struct clk *prem_clk_clocks[] = {
+	&clk32_premult,
+	&clk16m,
+};
+
+static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int i;
+	unsigned int reg = __raw_readl(CCM_CSCR);
+
+	i = _clk_can_use_parent(prem_clk_clocks, ARRAY_SIZE(prem_clk_clocks),
+				parent);
+
+	switch (i) {
+	case 0:
+		reg &= ~CCM_CSCR_SYSTEM_SEL;
+		break;
+	case 1:
+		reg |= CCM_CSCR_SYSTEM_SEL;
+		break;
+	default:
+		return i;
+	}
+
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
+static struct clk prem_clk = {
+	.name = "prem_clk",
+	.set_parent = prem_clk_set_parent,
+};
+
+static unsigned long system_clk_get_rate(struct clk *clk)
+{
+	return mx1_decode_pll(__raw_readl(CCM_SPCTL0),
+			      clk_get_rate(clk->parent));
+}
+
+static struct clk system_clk = {
+	.name = "system_clk",
+	.parent = &prem_clk,
+	.get_rate = system_clk_get_rate,
+};
+
+static unsigned long mcu_clk_get_rate(struct clk *clk)
+{
+	return mx1_decode_pll(__raw_readl(CCM_MPCTL0),
+			      clk_get_rate(clk->parent));
+}
+
+static struct clk mcu_clk = {
+	.name = "mcu_clk",
+	.parent = &clk32_premult,
+	.get_rate = mcu_clk_get_rate,
+};
+
+static unsigned long fclk_get_rate(struct clk *clk)
+{
+	unsigned long fclk = clk_get_rate(clk->parent);
+
+	if (__raw_readl(CCM_CSCR) & CCM_CSCR_PRESC)
+		fclk /= 2;
+
+	return fclk;
+}
+
+static struct clk fclk = {
+	.name = "fclk",
+	.parent = &mcu_clk,
+	.get_rate = fclk_get_rate,
+};
+
+/*
+ *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
+ */
+static unsigned long hclk_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
+			CCM_CSCR_BCLK_MASK) >> CCM_CSCR_BCLK_OFFSET) + 1);
+}
+
+static unsigned long hclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 16);
+}
+
+static int hclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg &= ~CCM_CSCR_BCLK_MASK;
+	reg |= div << CCM_CSCR_BCLK_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
+static struct clk hclk = {
+	.name = "hclk",
+	.parent = &system_clk,
+	.get_rate = hclk_get_rate,
+	.round_rate = hclk_round_rate,
+	.set_rate = hclk_set_rate,
+};
+
+static unsigned long clk48m_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
+			CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET) + 1);
+}
+
+static unsigned long clk48m_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 8);
+}
+
+static int clk48m_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg &= ~CCM_CSCR_USB_MASK;
+	reg |= div << CCM_CSCR_USB_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
+static struct clk clk48m = {
+	.name = "CLK48M",
+	.parent = &system_clk,
+	.get_rate = clk48m_get_rate,
+	.round_rate = clk48m_round_rate,
+	.set_rate = clk48m_set_rate,
+};
+
+/*
+ *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
+ */
+static unsigned long perclk1_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
+			CCM_PCDR_PCLK1_MASK) >> CCM_PCDR_PCLK1_OFFSET) + 1);
+}
+
+static unsigned long perclk1_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 16);
+}
+
+static int perclk1_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_PCDR);
+	reg &= ~CCM_PCDR_PCLK1_MASK;
+	reg |= div << CCM_PCDR_PCLK1_OFFSET;
+	__raw_writel(reg, CCM_PCDR);
+
+	return 0;
+}
+
+/*
+ *  get peripheral clock 2 ( LCD, SD, SPI[12] )
+ */
+static unsigned long perclk2_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
+			CCM_PCDR_PCLK2_MASK) >> CCM_PCDR_PCLK2_OFFSET) + 1);
+}
+
+static unsigned long perclk2_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 16);
+}
+
+static int perclk2_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_PCDR);
+	reg &= ~CCM_PCDR_PCLK2_MASK;
+	reg |= div << CCM_PCDR_PCLK2_OFFSET;
+	__raw_writel(reg, CCM_PCDR);
+
+	return 0;
+}
+
+/*
+ *  get peripheral clock 3 ( SSI )
+ */
+static unsigned long perclk3_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
+			CCM_PCDR_PCLK3_MASK) >> CCM_PCDR_PCLK3_OFFSET) + 1);
+}
+
+static unsigned long perclk3_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 128);
+}
+
+static int perclk3_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 128 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_PCDR);
+	reg &= ~CCM_PCDR_PCLK3_MASK;
+	reg |= div << CCM_PCDR_PCLK3_OFFSET;
+	__raw_writel(reg, CCM_PCDR);
+
+	return 0;
+}
+
+static struct clk perclk[] = {
+	{
+		.name = "perclk",
+		.id = 0,
+		.parent = &system_clk,
+		.get_rate = perclk1_get_rate,
+		.round_rate = perclk1_round_rate,
+		.set_rate = perclk1_set_rate,
+	}, {
+		.name = "perclk",
+		.id = 1,
+		.parent = &system_clk,
+		.get_rate = perclk2_get_rate,
+		.round_rate = perclk2_round_rate,
+		.set_rate = perclk2_set_rate,
+	}, {
+		.name = "perclk",
+		.id = 2,
+		.parent = &system_clk,
+		.get_rate = perclk3_get_rate,
+		.round_rate = perclk3_round_rate,
+		.set_rate = perclk3_set_rate,
+	}
+};
+
+static const struct clk *clko_clocks[] = {
+	&perclk[0],
+	&hclk,
+	&clk48m,
+	&clk16m,
+	&prem_clk,
+	&fclk,
+};
+
+static int clko_set_parent(struct clk *clk, struct clk *parent)
+{
+	int i;
+	unsigned int reg;
+
+	i = _clk_can_use_parent(clko_clocks, ARRAY_SIZE(clko_clocks), parent);
+	if (i < 0)
+		return i;
+
+	reg = __raw_readl(CCM_CSCR) & ~CCM_CSCR_CLKO_MASK;
+	reg |= i << CCM_CSCR_CLKO_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	if (clko_clocks[i]->set_rate && clko_clocks[i]->round_rate) {
+		clk->set_rate = _clk_parent_set_rate;
+		clk->round_rate = _clk_parent_round_rate;
+	} else {
+		clk->set_rate = NULL;
+		clk->round_rate = NULL;
+	}
+
+	return 0;
+}
+
+static struct clk clko_clk = {
+	.name = "clko_clk",
+	.set_parent = clko_set_parent,
+};
+
+static struct clk dma_clk = {
+	.name = "dma_clk",
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+	.enable = _clk_enable,
+	.enable_reg = SCM_GCCR,
+	.enable_shift = SCM_GCCR_DMA_CLK_EN_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk csi_clk = {
+	.name = "csi_clk",
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+	.enable = _clk_enable,
+	.enable_reg = SCM_GCCR,
+	.enable_shift = SCM_GCCR_CSI_CLK_EN_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk mma_clk = {
+	.name = "mma_clk",
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+	.enable = _clk_enable,
+	.enable_reg = SCM_GCCR,
+	.enable_shift = SCM_GCCR_MMA_CLK_EN_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk usbd_clk = {
+	.name = "usbd_clk",
+	.parent = &clk48m,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+	.enable = _clk_enable,
+	.enable_reg = SCM_GCCR,
+	.enable_shift = SCM_GCCR_USBD_CLK_EN_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk gpt_clk = {
+	.name = "gpt_clk",
+	.parent = &perclk[0],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk uart_clk = {
+	.name = "uart_clk",
+	.parent = &perclk[0],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk i2c_clk = {
+	.name = "i2c_clk",
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk spi_clk = {
+	.name = "spi_clk",
+	.parent = &perclk[1],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk sdhc_clk = {
+	.name = "sdhc_clk",
+	.parent = &perclk[1],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk lcdc_clk = {
+	.name = "lcdc_clk",
+	.parent = &perclk[1],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk mshc_clk = {
+	.name = "mshc_clk",
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk ssi_clk = {
+	.name = "ssi_clk",
+	.parent = &perclk[2],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk rtc_clk = {
+	.name = "rtc_clk",
+	.parent = &clk32,
+};
+
+static struct clk *mxc_clks[] = {
+	&clk16m,
+	&clk32,
+	&clk32_premult,
+	&prem_clk,
+	&system_clk,
+	&mcu_clk,
+	&fclk,
+	&hclk,
+	&clk48m,
+	&perclk[0],
+	&perclk[1],
+	&perclk[2],
+	&clko_clk,
+	&dma_clk,
+	&csi_clk,
+	&mma_clk,
+	&usbd_clk,
+	&gpt_clk,
+	&uart_clk,
+	&i2c_clk,
+	&spi_clk,
+	&sdhc_clk,
+	&lcdc_clk,
+	&mshc_clk,
+	&ssi_clk,
+	&rtc_clk,
+};
+
+int __init mxc_clocks_init(unsigned long fref)
+{
+	struct clk **clkp;
+	unsigned int reg;
+
+	/* disable clocks we are able to */
+	__raw_writel(0, SCM_GCCR);
+
+	clk32_rate = fref;
+	reg = __raw_readl(CCM_CSCR);
+
+	/* detect clock reference for system PLL */
+	if (reg & CCM_CSCR_SYSTEM_SEL) {
+		prem_clk.parent = &clk16m;
+	} else {
+		/* ensure that oscillator is disabled */
+		reg &= ~(1 << CCM_CSCR_OSC_EN_SHIFT);
+		__raw_writel(reg, CCM_CSCR);
+		prem_clk.parent = &clk32_premult;
+	}
+
+	/* detect reference for CLKO */
+	reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
+	clko_clk.parent = (struct clk *)clko_clocks[reg];
+
+	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
+		clk_register(*clkp);
+
+	clk_enable(&hclk);
+	clk_enable(&fclk);
+
+	return 0;
+}
diff --git a/arch/arm/mach-mx1/crm_regs.h b/arch/arm/mach-mx1/crm_regs.h
new file mode 100644
index 000000000000..22e866ff0c09
--- /dev/null
+++ b/arch/arm/mach-mx1/crm_regs.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This file may be distributed under the terms of the GNU General
+ * Public License, version 2.
+ */
+
+#ifndef __ARCH_ARM_MACH_MX1_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX1_CRM_REGS_H__
+
+#define CCM_BASE	IO_ADDRESS(CCM_BASE_ADDR)
+#define SCM_BASE	IO_ADDRESS(SCM_BASE_ADDR)
+
+/* CCM register addresses */
+#define CCM_CSCR	(CCM_BASE + 0x0)
+#define CCM_MPCTL0	(CCM_BASE + 0x4)
+#define CCM_MPCTL1	(CCM_BASE + 0x8)
+#define CCM_SPCTL0	(CCM_BASE + 0xC)
+#define CCM_SPCTL1	(CCM_BASE + 0x10)
+#define CCM_PCDR	(CCM_BASE + 0x20)
+
+#define CCM_CSCR_CLKO_OFFSET	29
+#define CCM_CSCR_CLKO_MASK	(0x7 << 29)
+#define CCM_CSCR_USB_OFFSET	26
+#define CCM_CSCR_USB_MASK	(0x7 << 26)
+#define CCM_CSCR_SPLL_RESTART	(1 << 22)
+#define CCM_CSCR_MPLL_RESTART	(1 << 21)
+#define CCM_CSCR_OSC_EN_SHIFT	17
+#define CCM_CSCR_SYSTEM_SEL	(1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK	(0xF << 10)
+#define CCM_CSCR_PRESC		(1 << 15)
+#define CCM_CSCR_SPEN		(1 << 1)
+#define CCM_CSCR_MPEN		(1 << 0)
+
+#define CCM_PCDR_PCLK3_OFFSET	16
+#define CCM_PCDR_PCLK3_MASK	(0x7F << 16)
+#define CCM_PCDR_PCLK2_OFFSET	4
+#define CCM_PCDR_PCLK2_MASK	(0xF << 4)
+#define CCM_PCDR_PCLK1_OFFSET	0
+#define CCM_PCDR_PCLK1_MASK	0xF
+
+/* SCM register addresses */
+#define SCM_SIDR	(SCM_BASE + 0x0)
+#define SCM_FMCR	(SCM_BASE + 0x4)
+#define SCM_GPCR	(SCM_BASE + 0x8)
+#define SCM_GCCR	(SCM_BASE + 0xC)
+
+#define SCM_GCCR_DMA_CLK_EN_OFFSET	3
+#define SCM_GCCR_CSI_CLK_EN_OFFSET	2
+#define SCM_GCCR_MMA_CLK_EN_OFFSET	1
+#define SCM_GCCR_USBD_CLK_EN_OFFSET	0
+
+#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
new file mode 100644
index 000000000000..686d8d2dbb24
--- /dev/null
+++ b/arch/arm/mach-mx1/devices.c
@@ -0,0 +1,260 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+
+static struct resource imx_csi_resources[] = {
+	[0] = {
+		.start  = 0x00224000,
+		.end    = 0x00224010,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = CSI_INT,
+		.end    = CSI_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 imx_csi_dmamask = 0xffffffffUL;
+
+struct platform_device imx_csi_device = {
+	.name           = "imx-csi",
+	.id             = 0, /* This is used to put cameras on this interface */
+	.dev		= {
+		.dma_mask = &imx_csi_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.resource       = imx_csi_resources,
+	.num_resources  = ARRAY_SIZE(imx_csi_resources),
+};
+
+static struct resource imx_i2c_resources[] = {
+	[0] = {
+		.start  = 0x00217000,
+		.end    = 0x00217010,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = I2C_INT,
+		.end    = I2C_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_i2c_device = {
+	.name           = "imx-i2c",
+	.id             = 0,
+	.resource       = imx_i2c_resources,
+	.num_resources  = ARRAY_SIZE(imx_i2c_resources),
+};
+
+static struct resource imx_uart1_resources[] = {
+	[0] = {
+		.start	= UART1_BASE_ADDR,
+		.end	= UART1_BASE_ADDR + 0xD0,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= UART1_MINT_RX,
+		.end	= UART1_MINT_RX,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= UART1_MINT_TX,
+		.end	= UART1_MINT_TX,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= UART1_MINT_RTS,
+		.end	= UART1_MINT_RTS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_uart1_device = {
+	.name		= "imx-uart",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
+	.resource	= imx_uart1_resources,
+};
+
+static struct resource imx_uart2_resources[] = {
+	[0] = {
+		.start	= UART2_BASE_ADDR,
+		.end	= UART2_BASE_ADDR + 0xD0,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= UART2_MINT_RX,
+		.end	= UART2_MINT_RX,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= UART2_MINT_TX,
+		.end	= UART2_MINT_TX,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= UART2_MINT_RTS,
+		.end	= UART2_MINT_RTS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_uart2_device = {
+	.name		= "imx-uart",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
+	.resource	= imx_uart2_resources,
+};
+
+static struct resource imx_rtc_resources[] = {
+	[0] = {
+		.start  = 0x00204000,
+		.end    = 0x00204024,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = RTC_INT,
+		.end    = RTC_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = RTC_SAMINT,
+		.end    = RTC_SAMINT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_rtc_device = {
+	.name           = "rtc-imx",
+	.id             = 0,
+	.resource       = imx_rtc_resources,
+	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
+};
+
+static struct resource imx_wdt_resources[] = {
+	[0] = {
+		.start  = 0x00201000,
+		.end    = 0x00201008,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = WDT_INT,
+		.end    = WDT_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_wdt_device = {
+	.name           = "imx-wdt",
+	.id             = 0,
+	.resource       = imx_wdt_resources,
+	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
+};
+
+static struct resource imx_usb_resources[] = {
+	[0] = {
+		.start	= 0x00212000,
+		.end	= 0x00212148,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= USBD_INT0,
+		.end	= USBD_INT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= USBD_INT1,
+		.end	= USBD_INT1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= USBD_INT2,
+		.end	= USBD_INT2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[4] = {
+		.start	= USBD_INT3,
+		.end	= USBD_INT3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[5] = {
+		.start	= USBD_INT4,
+		.end	= USBD_INT4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[6] = {
+		.start	= USBD_INT5,
+		.end	= USBD_INT5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[7] = {
+		.start	= USBD_INT6,
+		.end	= USBD_INT6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_usb_device = {
+	.name		= "imx_udc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(imx_usb_resources),
+	.resource	= imx_usb_resources,
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+	[0] = {
+		.chip.label = "gpio-0",
+		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
+		.irq = GPIO_INT_PORTA,
+		.virtual_irq_start = MXC_GPIO_IRQ_START
+	},
+	[1] = {
+		.chip.label = "gpio-1",
+		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
+		.irq = GPIO_INT_PORTB,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32
+	},
+	[2] = {
+		.chip.label = "gpio-2",
+		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
+		.irq = GPIO_INT_PORTC,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64
+	},
+	[3] = {
+		.chip.label = "gpio-3",
+		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
+		.irq = GPIO_INT_PORTD,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96
+	}
+};
+
+int __init mxc_register_gpios(void)
+{
+	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
diff --git a/arch/arm/mach-mx1/devices.h b/arch/arm/mach-mx1/devices.h
new file mode 100644
index 000000000000..0da5d7cce3a2
--- /dev/null
+++ b/arch/arm/mach-mx1/devices.h
@@ -0,0 +1,7 @@
+extern struct platform_device imx_csi_device;
+extern struct platform_device imx_i2c_device;
+extern struct platform_device imx_uart1_device;
+extern struct platform_device imx_uart2_device;
+extern struct platform_device imx_rtc_device;
+extern struct platform_device imx_wdt_device;
+extern struct platform_device imx_usb_device;
diff --git a/arch/arm/mach-integrator/include/mach/dma.h b/arch/arm/mach-mx1/generic.c
index fbebe85a2db7..0dec6f300ffc 100644
--- a/arch/arm/mach-integrator/include/mach/dma.h
+++ b/arch/arm/mach-mx1/generic.c
@@ -1,7 +1,9 @@
 /*
- *  arch/arm/mach-integrator/include/mach/dma.h
+ *  author: Sascha Hauer
+ *  Created: april 20th, 2004
+ *  Copyright: Synertronixx GmbH
  *
- *  Copyright (C) 1997,1998 Russell King
+ *  Common code for i.MX machines
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -16,4 +18,26 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
  */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+
+static struct map_desc imx_io_desc[] __initdata = {
+	{
+		.virtual	= IMX_IO_BASE,
+		.pfn		= __phys_to_pfn(IMX_IO_PHYS),
+		.length		= IMX_IO_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+void __init mxc_map_io(void)
+{
+	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
+}
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
new file mode 100644
index 000000000000..2e4b185fe4a9
--- /dev/null
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -0,0 +1,148 @@
+/*
+ * arch/arm/mach-imx/mx1ads.c
+ *
+ * Initially based on:
+ *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
+ *	Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
+ *
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx1-mx2.h>
+#include "devices.h"
+
+/*
+ * UARTs platform data
+ */
+static int mxc_uart1_pins[] = {
+	PC9_PF_UART1_CTS,
+	PC10_PF_UART1_RTS,
+	PC11_PF_UART1_TXD,
+	PC12_PF_UART1_RXD,
+};
+
+static int uart1_mxc_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins), "UART1");
+}
+
+static int uart1_mxc_exit(struct platform_device *pdev)
+{
+	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins));
+	return 0;
+}
+
+static int mxc_uart2_pins[] = {
+	PB28_PF_UART2_CTS,
+	PB29_PF_UART2_RTS,
+	PB30_PF_UART2_TXD,
+	PB31_PF_UART2_RXD,
+};
+
+static int uart2_mxc_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+			ARRAY_SIZE(mxc_uart2_pins), "UART2");
+}
+
+static int uart2_mxc_exit(struct platform_device *pdev)
+{
+	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
+			ARRAY_SIZE(mxc_uart2_pins));
+	return 0;
+}
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.init = uart1_mxc_init,
+		.exit = uart1_mxc_exit,
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.init = uart2_mxc_init,
+		.exit = uart2_mxc_exit,
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+/*
+ * Physmap flash
+ */
+
+static struct physmap_flash_data mx1ads_flash_data = {
+	.width		= 4,		/* bankwidth in bytes */
+};
+
+static struct resource flash_resource = {
+	.start	= IMX_CS0_PHYS,
+	.end	= IMX_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * Board init
+ */
+static void __init mx1ads_init(void)
+{
+	/* UART */
+	mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
+	mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
+
+	/* Physmap flash */
+	mxc_register_device(&flash_device, &mx1ads_flash_data);
+}
+
+static void __init mx1ads_timer_init(void)
+{
+	mxc_clocks_init(32000);
+	mxc_timer_init("gpt_clk");
+}
+
+struct sys_timer mx1ads_timer = {
+	.init	= mx1ads_timer_init,
+};
+
+MACHINE_START(MX1ADS, "Freescale MX1ADS")
+	/* Maintainer: Sascha Hauer, Pengutronix */
+	.phys_io	= IMX_IO_PHYS,
+	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mxc_map_io,
+	.init_irq	= mxc_init_irq,
+	.timer		= &mx1ads_timer,
+	.init_machine	= mx1ads_init,
+MACHINE_END
+
+MACHINE_START(MXLADS, "Freescale MXLADS")
+	.phys_io	= IMX_IO_PHYS,
+	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mxc_map_io,
+	.init_irq	= mxc_init_irq,
+	.timer		= &mx1ads_timer,
+	.init_machine	= mx1ads_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index bd0559d5933e..af121f5ab710 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -190,38 +190,72 @@ struct platform_device mxc_wdt = {
 	.resource = mxc_wdt_resources,
 };
 
+static struct resource mxc_w1_master_resources[] = {
+	{
+		.start = OWIRE_BASE_ADDR,
+		.end   = OWIRE_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_w1_master_device = {
+	.name = "mxc_w1",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_w1_master_resources),
+	.resource = mxc_w1_master_resources,
+};
+
+static struct resource mxc_nand_resources[] = {
+	{
+		.start	= NFC_BASE_ADDR,
+		.end	= NFC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MXC_INT_NANDFC,
+		.end	= MXC_INT_NANDFC,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mxc_nand_device = {
+	.name = "mxc_nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_nand_resources),
+	.resource = mxc_nand_resources,
+};
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	[0] = {
 		.chip.label = "gpio-0",
 		.irq = MXC_INT_GPIO,
 		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0),
-		.virtual_irq_start = MXC_MAX_INT_LINES,
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
 	},
 	[1] = {
 		.chip.label = "gpio-1",
 		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1),
-		.virtual_irq_start = MXC_MAX_INT_LINES + 32,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
 	},
 	[2] = {
 		.chip.label = "gpio-2",
 		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2),
-		.virtual_irq_start = MXC_MAX_INT_LINES + 64,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
 	},
 	[3] = {
 		.chip.label = "gpio-3",
 		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3),
-		.virtual_irq_start = MXC_MAX_INT_LINES + 96,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
 	},
 	[4] = {
 		.chip.label = "gpio-4",
 		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4),
-		.virtual_irq_start = MXC_MAX_INT_LINES + 128,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
 	},
 	[5] = {
 		.chip.label = "gpio-5",
 		.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5),
-		.virtual_irq_start = MXC_MAX_INT_LINES + 160,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
 	}
 };
 
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index c77a4b8f73b4..1e8cb577a642 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -12,4 +12,5 @@ extern struct platform_device mxc_uart_device2;
 extern struct platform_device mxc_uart_device3;
 extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_uart_device5;
-
+extern struct platform_device mxc_w1_master_device;
+extern struct platform_device mxc_nand_device;
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 56e22d3ca075..2b5c67f54571 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -68,15 +68,14 @@ static int mxc_uart0_pins[] = {
 static int uart_mxc_port0_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART0");
+			ARRAY_SIZE(mxc_uart0_pins), "UART0");
 }
 
 static int uart_mxc_port0_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART0");
+	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
+			ARRAY_SIZE(mxc_uart0_pins));
+	return 0;
 }
 
 static int mxc_uart1_pins[] = {
@@ -89,15 +88,14 @@ static int mxc_uart1_pins[] = {
 static int uart_mxc_port1_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART1");
+			ARRAY_SIZE(mxc_uart1_pins), "UART1");
 }
 
 static int uart_mxc_port1_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART1");
+	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins));
+	return 0;
 }
 
 static int mxc_uart2_pins[] = {
@@ -110,15 +108,14 @@ static int mxc_uart2_pins[] = {
 static int uart_mxc_port2_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART2");
+			ARRAY_SIZE(mxc_uart2_pins), "UART2");
 }
 
 static int uart_mxc_port2_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART2");
+	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
+			ARRAY_SIZE(mxc_uart2_pins));
+	return 0;
 }
 
 static int mxc_uart3_pins[] = {
@@ -131,15 +128,13 @@ static int mxc_uart3_pins[] = {
 static int uart_mxc_port3_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
-			ARRAY_SIZE(mxc_uart3_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART3");
+			ARRAY_SIZE(mxc_uart3_pins), "UART3");
 }
 
 static int uart_mxc_port3_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
-			ARRAY_SIZE(mxc_uart3_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART3");
+	mxc_gpio_release_multiple_pins(mxc_uart3_pins,
+			ARRAY_SIZE(mxc_uart3_pins));
 }
 
 static int mxc_uart4_pins[] = {
@@ -152,15 +147,14 @@ static int mxc_uart4_pins[] = {
 static int uart_mxc_port4_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
-			ARRAY_SIZE(mxc_uart4_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART4");
+			ARRAY_SIZE(mxc_uart4_pins), "UART4");
 }
 
 static int uart_mxc_port4_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
-			ARRAY_SIZE(mxc_uart4_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART4");
+	mxc_gpio_release_multiple_pins(mxc_uart4_pins,
+			ARRAY_SIZE(mxc_uart4_pins));
+	return 0;
 }
 
 static int mxc_uart5_pins[] = {
@@ -173,15 +167,14 @@ static int mxc_uart5_pins[] = {
 static int uart_mxc_port5_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
-			ARRAY_SIZE(mxc_uart5_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART5");
+			ARRAY_SIZE(mxc_uart5_pins), "UART5");
 }
 
 static int uart_mxc_port5_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
-			ARRAY_SIZE(mxc_uart5_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART5");
+	mxc_gpio_release_multiple_pins(mxc_uart5_pins,
+			ARRAY_SIZE(mxc_uart5_pins));
+	return 0;
 }
 
 static struct platform_device *platform_devices[] __initdata = {
@@ -212,15 +205,13 @@ static int mxc_fec_pins[] = {
 static void gpio_fec_active(void)
 {
 	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "FEC");
+			ARRAY_SIZE(mxc_fec_pins), "FEC");
 }
 
 static void gpio_fec_inactive(void)
 {
-	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "FEC");
+	mxc_gpio_release_multiple_pins(mxc_fec_pins,
+			ARRAY_SIZE(mxc_fec_pins));
 }
 
 static struct imxuart_platform_data uart_pdata[] = {
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 7f55746e2591..dfd4156da7d5 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -19,6 +19,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/common.h>
@@ -27,10 +28,36 @@
 #include <asm/mach/time.h>
 #include <mach/imx-uart.h>
 #include <mach/board-pcm038.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
 
 /*
+ * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
+ * 16 bit width
+ */
+
+static struct platdata_mtd_ram pcm038_sram_data = {
+	.bankwidth = 2,
+};
+
+static struct resource pcm038_sram_resource = {
+	.start = CS1_BASE_ADDR,
+	.end   = CS1_BASE_ADDR + 512 * 1024 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm038_sram_mtd_device = {
+	.name = "mtd-ram",
+	.id = 0,
+	.dev = {
+		.platform_data = &pcm038_sram_data,
+	},
+	.num_resources = 1,
+	.resource = &pcm038_sram_resource,
+};
+
+/*
  * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
  * 16 bit width
  */
@@ -64,15 +91,14 @@ static int mxc_uart0_pins[] = {
 static int uart_mxc_port0_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART0");
+			ARRAY_SIZE(mxc_uart0_pins), "UART0");
 }
 
 static int uart_mxc_port0_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART0");
+	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
+			ARRAY_SIZE(mxc_uart0_pins));
+	return 0;
 }
 
 static int mxc_uart1_pins[] = {
@@ -85,15 +111,14 @@ static int mxc_uart1_pins[] = {
 static int uart_mxc_port1_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART1");
+			ARRAY_SIZE(mxc_uart1_pins), "UART1");
 }
 
 static int uart_mxc_port1_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART1");
+	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins));
+	return 0;
 }
 
 static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS,
@@ -104,15 +129,14 @@ static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS,
 static int uart_mxc_port2_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART2");
+			ARRAY_SIZE(mxc_uart2_pins), "UART2");
 }
 
 static int uart_mxc_port2_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART2");
+	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
+			ARRAY_SIZE(mxc_uart2_pins));
+	return 0;
 }
 
 static struct imxuart_platform_data uart_pdata[] = {
@@ -155,29 +179,47 @@ static int mxc_fec_pins[] = {
 static void gpio_fec_active(void)
 {
 	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "FEC");
+			ARRAY_SIZE(mxc_fec_pins), "FEC");
 }
 
 static void gpio_fec_inactive(void)
 {
-	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "FEC");
+	mxc_gpio_release_multiple_pins(mxc_fec_pins,
+			ARRAY_SIZE(mxc_fec_pins));
 }
 
+static struct mxc_nand_platform_data pcm038_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
 static struct platform_device *platform_devices[] __initdata = {
 	&pcm038_nor_mtd_device,
+	&mxc_w1_master_device,
+	&pcm038_sram_mtd_device,
 };
 
+/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
+ * setup other stuffs to access the sram. */
+static void __init pcm038_init_sram(void)
+{
+	__raw_writel(0x0000d843, CSCR_U(1));
+	__raw_writel(0x22252521, CSCR_L(1));
+	__raw_writel(0x22220a00, CSCR_A(1));
+}
+
 static void __init pcm038_init(void)
 {
 	gpio_fec_active();
+	pcm038_init_sram();
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
 
+	mxc_gpio_mode(PE16_AF_RTCK); /* OWIRE */
+	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index db9431dee1b4..e79659e8176e 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -21,5 +21,19 @@ config MACH_MX31LITE
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX31_3DS
+	bool "Support MX31PDK (3DS)"
+	default n
+	help
+	  Include support for MX31PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31MOBOARD
+	bool "Support mx31moboard platforms (EPFL Mobots group)"
+	default n
+	help
+	  Include support for mx31moboard platform. This includes specific
+	  configurations for the board and its peripherals.
+
 endmenu
 
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 8b21abb71fb0..5a151540fe83 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -8,3 +8,5 @@ obj-y			:= mm.o clock.o devices.o iomux.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
+obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
+obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 9f14a871ee7c..b1746aae1f89 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -24,6 +24,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <mach/clock.h>
+#include <mach/hardware.h>
 #include <asm/div64.h>
 
 #include "crm_regs.h"
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index a6bdcc07f3c9..1d46cb4adf96 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -125,19 +125,19 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
 		.chip.label = "gpio-0",
 		.base = IO_ADDRESS(GPIO1_BASE_ADDR),
 		.irq = MXC_INT_GPIO1,
-		.virtual_irq_start = MXC_GPIO_INT_BASE
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
 	},
 	[1] = {
 		.chip.label = "gpio-1",
 		.base = IO_ADDRESS(GPIO2_BASE_ADDR),
 		.irq = MXC_INT_GPIO2,
-		.virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
 	},
 	[2] = {
 		.chip.label = "gpio-2",
 		.base = IO_ADDRESS(GPIO3_BASE_ADDR),
 		.irq = MXC_INT_GPIO3,
-		.virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN * 2
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
 	}
 };
 
@@ -145,3 +145,37 @@ int __init mxc_register_gpios(void)
 {
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
+
+static struct resource mxc_w1_master_resources[] = {
+	{
+		.start = OWIRE_BASE_ADDR,
+		.end   = OWIRE_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_w1_master_device = {
+	.name = "mxc_w1",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_w1_master_resources),
+	.resource = mxc_w1_master_resources,
+};
+
+static struct resource mxc_nand_resources[] = {
+	{
+		.start	= NFC_BASE_ADDR,
+		.end	= NFC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MXC_INT_NANDFC,
+		.end	= MXC_INT_NANDFC,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mxc_nand_device = {
+	.name = "mxc_nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_nand_resources),
+	.resource = mxc_nand_resources,
+};
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 4dc03f9e6001..9949ef4e0694 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -4,3 +4,5 @@ extern struct platform_device mxc_uart_device1;
 extern struct platform_device mxc_uart_device2;
 extern struct platform_device mxc_uart_device3;
 extern struct platform_device mxc_uart_device4;
+extern struct platform_device mxc_w1_master_device;
+extern struct platform_device mxc_nand_device;
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index 6e664be8cc13..7a5088b519a8 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -74,17 +74,18 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 	u32 field, l;
 	void __iomem *reg;
 
-	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3;
+	pin &= IOMUX_PADNUM_MASK;
+	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
 	field = (pin + 2) % 3;
 
-	pr_debug("%s: reg offset = 0x%x field = %d\n",
+	pr_debug("%s: reg offset = 0x%x, field = %d\n",
 			__func__, (pin + 2) / 3, field);
 
 	spin_lock(&gpio_mux_lock);
 
 	l = __raw_readl(reg);
-	l &= ~(0x1ff << (field * 9));
-	l |= config << (field * 9);
+	l &= ~(0x1ff << (field * 10));
+	l |= config << (field * 10);
 	__raw_writel(l, reg);
 
 	spin_unlock(&gpio_mux_lock);
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
new file mode 100644
index 000000000000..c29098af7394
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -0,0 +1,141 @@
+/*
+ *  Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/memory.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include "devices.h"
+
+static struct physmap_flash_data mx31moboard_flash_data = {
+	.width  	= 2,
+};
+
+static struct resource mx31moboard_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device mx31moboard_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &mx31moboard_flash_data,
+	},
+	.resource = &mx31moboard_flash_resource,
+	.num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mx31moboard_flash,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
+	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
+	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
+	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_iomux_mode(MX31_PIN_CTS2__CTS2);
+	mxc_iomux_mode(MX31_PIN_RTS2__RTS2);
+	mxc_iomux_mode(MX31_PIN_TXD2__TXD2);
+	mxc_iomux_mode(MX31_PIN_RXD2__RXD2);
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+	mxc_iomux_mode(MX31_PIN_PC_RST__CTS5);
+	mxc_iomux_mode(MX31_PIN_PC_VS2__RTS5);
+	mxc_iomux_mode(MX31_PIN_PC_BVD2__TXD5);
+	mxc_iomux_mode(MX31_PIN_PC_BVD1__RXD5);
+
+	mxc_register_device(&mxc_uart_device4, &uart_pdata);
+}
+
+/*
+ * This structure defines static mappings for the mx31moboard.
+ */
+static struct map_desc mx31moboard_io_desc[] __initdata = {
+	{
+		.virtual	= AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
+		.length		= AIPS1_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
+		.length		= AIPS2_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+void __init mx31moboard_map_io(void)
+{
+	mxc_map_io();
+	iotable_init(mx31moboard_io_desc, ARRAY_SIZE(mx31moboard_io_desc));
+}
+
+static void __init mx31moboard_timer_init(void)
+{
+	mxc_clocks_init(26000000);
+	mxc_timer_init("ipg_clk.0");
+}
+
+struct sys_timer mx31moboard_timer = {
+	.init	= mx31moboard_timer_init,
+};
+
+MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
+	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx31moboard_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx31moboard_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
new file mode 100644
index 000000000000..d464d068a4a6
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -0,0 +1,115 @@
+/*
+ *  Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/board-mx31pdk.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include "devices.h"
+
+/*!
+ * @file mx31pdk.c
+ *
+ * @brief This file contains the board-specific initialization routines.
+ *
+ * @ingroup System
+ */
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
+	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
+	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
+	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+/*!
+ * This structure defines static mappings for the i.MX31PDK board.
+ */
+static struct map_desc mx31pdk_io_desc[] __initdata = {
+	{
+		.virtual	= AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
+		.length		= AIPS1_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
+		.length		= AIPS2_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+/*!
+ * Set up static virtual mappings.
+ */
+static void __init mx31pdk_map_io(void)
+{
+	mxc_map_io();
+	iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
+}
+
+/*!
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_init_imx_uart();
+}
+
+static void __init mx31pdk_timer_init(void)
+{
+	mxc_clocks_init(26000000);
+	mxc_timer_init("ipg_clk.0");
+}
+
+static struct sys_timer mx31pdk_timer = {
+	.init	= mx31pdk_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_MX31PDK data structure.
+ */
+MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx31pdk_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx31pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 843f68c8ead1..8cea82587222 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -21,7 +21,11 @@
 
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
 #include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -32,6 +36,7 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-pcm037.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
 
@@ -59,8 +64,63 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static struct resource smc911x_resources[] = {
+	[0] = {
+		.start		= CS1_BASE_ADDR + 0x300,
+		.end		= CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+		.end		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc911x_platdata smc911x_info = {
+	.flags		= SMC911X_USE_32BIT,
+	.irq_flags	= IRQF_SHARED | IRQF_TRIGGER_LOW,
+};
+
+static struct platform_device pcm037_eth = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc911x_resources),
+	.resource	= smc911x_resources,
+	.dev		= {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct platdata_mtd_ram pcm038_sram_data = {
+	.bankwidth = 2,
+};
+
+static struct resource pcm038_sram_resource = {
+	.start = CS4_BASE_ADDR,
+	.end   = CS4_BASE_ADDR + 512 * 1024 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm037_sram_device = {
+	.name = "mtd-ram",
+	.id = 0,
+	.dev = {
+		.platform_data = &pcm038_sram_data,
+	},
+	.num_resources = 1,
+	.resource = &pcm038_sram_resource,
+};
+
+static struct mxc_nand_platform_data pcm037_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
+	&pcm037_eth,
+	&pcm037_sram_device,
 };
 
 /*
@@ -81,6 +141,16 @@ static void __init mxc_board_init(void)
 	mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
 
 	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+
+	mxc_iomux_mode(MX31_PIN_BATT_LINE__OWIRE);
+	mxc_register_device(&mxc_w1_master_device, NULL);
+
+	/* SMSC9215 IRQ pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(MX31_PIN_GPIO3_1, "pcm037-eth"))
+		gpio_direction_input(MX31_PIN_GPIO3_1);
+
+	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 }
 
 /*
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index 24c79650f9f3..8f1f992f002e 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -22,14 +22,11 @@
 #include <linux/dma-mapping.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/err.h>
 
 #include <mach/netx-regs.h>
 #include <mach/hardware.h>
 
-struct clk {};
-
-static struct clk fb_clk;
-
 static struct clcd_panel *netx_panel;
 
 void netx_clcd_enable(struct clcd_fb *fb)
@@ -85,7 +82,7 @@ int clk_enable(struct clk *clk)
 
 struct clk *clk_get(struct device *dev, const char *id)
 {
-	return &fb_clk;
+	return dev && strcmp(dev_name(dev), "fb") == 0 ? NULL : ERR_PTR(-ENOENT);
 }
 
 void clk_put(struct clk *clk)
diff --git a/arch/arm/mach-netx/include/mach/dma.h b/arch/arm/mach-netx/include/mach/dma.h
deleted file mode 100644
index 690b3ebc43ac..000000000000
--- a/arch/arm/mach-netx/include/mach/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/mach-netx/include/mach/dma.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define MAX_DMA_CHANNELS 0
-#define MAX_DMA_ADDRESS ~0
diff --git a/arch/arm/mach-netx/include/mach/io.h b/arch/arm/mach-netx/include/mach/io.h
index 468b92a82585..c3921cb3b6a6 100644
--- a/arch/arm/mach-netx/include/mach/io.h
+++ b/arch/arm/mach-netx/include/mach/io.h
@@ -22,7 +22,7 @@
 
 #define IO_SPACE_LIMIT 0xffffffff
 
-#define __io(a)         ((void __iomem *)(a))
+#define __io(a)		__typesafe_io(a)
 #define __mem_pci(a)            (a)
 
 #endif
diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h
index 53745a1378de..9a363f297f90 100644
--- a/arch/arm/mach-netx/include/mach/memory.h
+++ b/arch/arm/mach-netx/include/mach/memory.h
@@ -22,15 +22,5 @@
 
 #define PHYS_OFFSET UL(0x80000000)
 
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)         __virt_to_phys(x)
-#define __bus_to_virt(x)         __phys_to_virt(x)
-
 #endif
 
diff --git a/arch/arm/mach-netx/include/mach/netx-regs.h b/arch/arm/mach-netx/include/mach/netx-regs.h
index 5104a00d40f4..08c60ff227be 100644
--- a/arch/arm/mach-netx/include/mach/netx-regs.h
+++ b/arch/arm/mach-netx/include/mach/netx-regs.h
@@ -328,6 +328,28 @@
 #define NETX_PFIFO_FILL_LEVEL(pfifo)  NETX_PFIFO_REG(0x180 + ((pfifo)<<2))
 #define NETX_PFIFO_XPEC_ISR(xpec)     NETX_PFIFO_REG(0x400 + ((xpec) << 2))
 
+
+/*******************************
+ * Memory Controller           *
+ *******************************/
+
+/* Registers */
+#define NETX_MEMCR_REG(ofs)               __io(NETX_VA_MEMCR + (ofs))
+#define NETX_MEMCR_SRAM_CTRL(cs)      NETX_MEMCR_REG(0x0 + 4 * (cs)) /* SRAM for CS 0..2 */
+#define NETX_MEMCR_SDRAM_CFG_CTRL     NETX_MEMCR_REG(0x40)
+#define NETX_MEMCR_SDRAM_TIMING_CTRL  NETX_MEMCR_REG(0x44)
+#define NETX_MEMCR_SDRAM_MODE         NETX_MEMCR_REG(0x48)
+#define NETX_MEMCR_SDRAM_EXT_MODE     NETX_MEMCR_REG(0x4c)
+#define NETX_MEMCR_PRIO_TIMESLOT_CTRL NETX_MEMCR_REG(0x80)
+#define NETX_MEMCR_PRIO_ACCESS_CTRL   NETX_MEMCR_REG(0x84)
+
+/* Bits */
+#define NETX_MEMCR_SRAM_CTRL_WIDTHEXTMEM(x)       (((x) & 0x3)  << 24)
+#define NETX_MEMCR_SRAM_CTRL_WSPOSTPAUSEEXTMEM(x) (((x) & 0x3)  << 16)
+#define NETX_MEMCR_SRAM_CTRL_WSPREPASEEXTMEM(x)   (((x) & 0x3)  << 8)
+#define NETX_MEMCR_SRAM_CTRL_WSEXTMEM(x)          (((x) & 0x1f) << 0)
+
+
 /*******************************
  * Dual Port Memory            *
  *******************************/
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 7c540c1f01fa..d51d627ce7cf 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -21,43 +21,100 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach/time.h>
 #include <mach/netx-regs.h>
 
+#define TIMER_CLOCKEVENT 0
+#define TIMER_CLOCKSOURCE 1
+
+static void netx_set_mode(enum clock_event_mode mode,
+		struct clock_event_device *clk)
+{
+	u32 tmode;
+
+	/* disable timer */
+	writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		writel(LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
+		tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
+			NETX_GPIO_COUNTER_CTRL_IRQ_EN |
+			NETX_GPIO_COUNTER_CTRL_RUN;
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
+		tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN |
+			NETX_GPIO_COUNTER_CTRL_RUN;
+		break;
+
+	default:
+		WARN(1, "%s: unhandled mode %d\n", __func__, mode);
+		/* fall through */
+
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_RESUME:
+		tmode = 0;
+		break;
+	}
+
+	writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
+}
+
+static int netx_set_next_event(unsigned long evt,
+		struct clock_event_device *clk)
+{
+	writel(0 - evt, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKEVENT));
+	return 0;
+}
+
+static struct clock_event_device netx_clockevent = {
+	.name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
+	.shift = 32,
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event = netx_set_next_event,
+	.set_mode = netx_set_mode,
+};
+
 /*
  * IRQ handler for the timer
  */
 static irqreturn_t
 netx_timer_interrupt(int irq, void *dev_id)
 {
-	timer_tick();
+	struct clock_event_device *evt = &netx_clockevent;
 
 	/* acknowledge interrupt */
 	writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
 
+	evt->event_handler(evt);
+
 	return IRQ_HANDLED;
 }
 
 static struct irqaction netx_timer_irq = {
-	.name           = "NetX Timer Tick",
-	.flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler        = netx_timer_interrupt,
+	.name		= "NetX Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= netx_timer_interrupt,
 };
 
 cycle_t netx_get_cycles(void)
 {
-	return readl(NETX_GPIO_COUNTER_CURRENT(1));
+	return readl(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
 }
 
 static struct clocksource clocksource_netx = {
-	.name 		= "netx_timer",
+	.name		= "netx_timer",
 	.rating		= 200,
 	.read		= netx_get_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift 		= 20,
+	.shift		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -77,24 +134,37 @@ static void __init netx_timer_init(void)
 	/* acknowledge interrupt */
 	writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
 
-	/* Enable the interrupt in the specific timer register and start timer */
+	/* Enable the interrupt in the specific timer
+	 * register and start timer
+	 */
 	writel(COUNTER_BIT(0), NETX_GPIO_IRQ_ENABLE);
 	writel(NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN,
-		NETX_GPIO_COUNTER_CTRL(0));
+			NETX_GPIO_COUNTER_CTRL(0));
 
 	setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq);
 
 	/* Setup timer one for clocksource */
-        writel(0, NETX_GPIO_COUNTER_CTRL(1));
-        writel(0, NETX_GPIO_COUNTER_CURRENT(1));
-        writel(0xFFFFFFFF, NETX_GPIO_COUNTER_MAX(1));
+	writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
+	writel(0, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
+	writel(0xffffffff, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKSOURCE));
 
-        writel(NETX_GPIO_COUNTER_CTRL_RUN,
-                NETX_GPIO_COUNTER_CTRL(1));
+	writel(NETX_GPIO_COUNTER_CTRL_RUN,
+			NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
 
 	clocksource_netx.mult =
 		clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_netx.shift);
 	clocksource_register(&clocksource_netx);
+
+	netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+			netx_clockevent.shift);
+	netx_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xfffffffe, &netx_clockevent);
+	/* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
+	 * Adding some safety ... */
+	netx_clockevent.min_delta_ns =
+		clockevent_delta2ns(0xa00, &netx_clockevent);
+	netx_clockevent.cpumask = cpumask_of_cpu(0);
+	clockevents_register_device(&netx_clockevent);
 }
 
 struct sys_timer netx_timer = {
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index 32eabf5dfa4f..8fc6205dc3a5 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -92,10 +92,10 @@ static int xc_check_ptr(struct xc *x, unsigned long adr, unsigned int size)
 	return -1;
 }
 
-static int xc_patch(struct xc *x, void *patch, int count)
+static int xc_patch(struct xc *x, const void *patch, int count)
 {
 	unsigned int val, adr;
-	unsigned int *data = patch;
+	const unsigned int *data = patch;
 
 	int i;
 	for (i = 0; i < count; i++) {
@@ -117,7 +117,7 @@ int xc_request_firmware(struct xc *x)
 	struct fw_header *head;
 	unsigned int size;
 	int i;
-	void *src;
+	const void *src;
 	unsigned long dst;
 
 	sprintf(name, "xc%d.bin", x->no);
diff --git a/arch/arm/mach-ns9xxx/include/mach/dma.h b/arch/arm/mach-ns9xxx/include/mach/dma.h
deleted file mode 100644
index 3f50d8c9e5c7..000000000000
--- a/arch/arm/mach-ns9xxx/include/mach/dma.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-ns9xxx/include/mach/dma.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#endif /* ifndef __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/hardware.h b/arch/arm/mach-ns9xxx/include/mach/hardware.h
index 6dbb2030f563..76631128e11c 100644
--- a/arch/arm/mach-ns9xxx/include/mach/hardware.h
+++ b/arch/arm/mach-ns9xxx/include/mach/hardware.h
@@ -11,8 +11,6 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include <asm/memory.h>
-
 /*
  * NetSilicon NS9xxx internal mapping:
  *
diff --git a/arch/arm/mach-ns9xxx/include/mach/io.h b/arch/arm/mach-ns9xxx/include/mach/io.h
index 027bf649645a..f08451d2e1bc 100644
--- a/arch/arm/mach-ns9xxx/include/mach/io.h
+++ b/arch/arm/mach-ns9xxx/include/mach/io.h
@@ -13,7 +13,7 @@
 
 #define IO_SPACE_LIMIT  0xffffffff /* XXX */
 
-#define __io(a)         ((void __iomem *)(a))
+#define __io(a)		__typesafe_io(a)
 #define __mem_pci(a)    (a)
 #define __mem_isa(a)    (IO_BASE + (a))
 
diff --git a/arch/arm/mach-ns9xxx/include/mach/memory.h b/arch/arm/mach-ns9xxx/include/mach/memory.h
index 649ee6235b94..6107193adbfe 100644
--- a/arch/arm/mach-ns9xxx/include/mach/memory.h
+++ b/arch/arm/mach-ns9xxx/include/mach/memory.h
@@ -21,7 +21,4 @@
 
 #define PHYS_OFFSET	UL(0x00000000)
 
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
 #endif
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 79f0b1f8497b..10a301e32434 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -4,16 +4,19 @@ comment "OMAP Core Type"
 config ARCH_OMAP730
 	depends on ARCH_OMAP1
 	bool "OMAP730 Based System"
+	select CPU_ARM926T
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
 	default y
 	bool "OMAP15xx Based System"
+	select CPU_ARM925T
 
 config ARCH_OMAP16XX
 	depends on ARCH_OMAP1
 	bool "OMAP16xx Based System"
+	select CPU_ARM926T
 	select ARCH_OMAP_OTG
 
 comment "OMAP Board Type"
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index db789461fca4..30308294e7c1 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -205,7 +205,7 @@ static struct platform_device *devices[] __initdata = {
 
 static int nand_dev_ready(struct omap_nand_platform_data *data)
 {
-	return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN);
+	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
 static struct omap_uart_config fsample_uart_config __initdata = {
@@ -223,8 +223,9 @@ static struct omap_board_config_kernel fsample_config[] = {
 
 static void __init omap_fsample_init(void)
 {
-	if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
-		nand_data.dev_ready = nand_dev_ready;
+	if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+		BUG();
+	nand_data.dev_ready = nand_dev_ready;
 
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index ab9ee5820c48..409fa56d0a87 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -12,90 +12,68 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/platform_device.h>
+
+#include <linux/i2c/tps65010.h>
+
 #include <mach/mmc.h>
 #include <mach/gpio.h>
 
-#ifdef CONFIG_MMC_OMAP
-static int slot_cover_open;
-static struct device *mmc_device;
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
-static int h2_mmc_set_power(struct device *dev, int slot, int power_on,
+static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
-		power_on ? "on" : "off", vdd);
-#endif
-	if (slot != 0) {
-		dev_err(dev, "No such slot %d\n", slot + 1);
-		return -ENODEV;
-	}
+	if (power_on)
+		gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1);
+	else
+		gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
 
 	return 0;
 }
 
-static int h2_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
+static int mmc_late_init(struct device *dev)
 {
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
-		bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
-#endif
-	if (slot != 0) {
-		dev_err(dev, "No such slot %d\n", slot + 1);
-		return -ENODEV;
-	}
+	int ret;
 
-	return 0;
-}
+	ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
+	if (ret < 0)
+		return ret;
 
-static int h2_mmc_get_cover_state(struct device *dev, int slot)
-{
-	BUG_ON(slot != 0);
-
-	return slot_cover_open;
-}
-
-void h2_mmc_slot_cover_handler(void *arg, int state)
-{
-	if (mmc_device == NULL)
-		return;
-
-	slot_cover_open = state;
-	omap_mmc_notify_cover_event(mmc_device, 0, state);
-}
-
-static int h2_mmc_late_init(struct device *dev)
-{
-	int ret = 0;
-
-	mmc_device = dev;
+	gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
 
 	return ret;
 }
 
-static void h2_mmc_cleanup(struct device *dev)
+static void mmc_shutdown(struct device *dev)
 {
+	gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
 }
 
-static struct omap_mmc_platform_data h2_mmc_data = {
+/*
+ * H2 could use the following functions tested:
+ * - mmc_get_cover_state that uses OMAP_MPUIO(1)
+ * - mmc_get_wp that uses OMAP_MPUIO(3)
+ */
+static struct omap_mmc_platform_data mmc1_data = {
 	.nr_slots                       = 1,
-	.switch_slot                    = NULL,
-	.init                           = h2_mmc_late_init,
-	.cleanup                        = h2_mmc_cleanup,
+	.init				= mmc_late_init,
+	.shutdown			= mmc_shutdown,
+	.dma_mask			= 0xffffffff,
 	.slots[0]       = {
-		.set_power              = h2_mmc_set_power,
-		.set_bus_mode           = h2_mmc_set_bus_mode,
-		.get_ro                 = NULL,
-		.get_cover_state        = h2_mmc_get_cover_state,
+		.set_power              = mmc_set_power,
 		.ocr_mask               = MMC_VDD_28_29 | MMC_VDD_30_31 |
 					  MMC_VDD_32_33 | MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
 
+static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
+
 void __init h2_mmc_init(void)
 {
-	omap_set_mmc_info(1, &h2_mmc_data);
+	mmc_data[0] = &mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
 }
 
 #else
@@ -104,7 +82,4 @@ void __init h2_mmc_init(void)
 {
 }
 
-void h2_mmc_slot_cover_handler(void *arg, int state)
-{
-}
 #endif
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 3b65914b9141..b240c5f861da 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -250,11 +250,8 @@ static struct platform_device h2_kp_device = {
 #if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
 static int h2_transceiver_mode(struct device *dev, int state)
 {
-	if (state & IR_SIRMODE)
-		omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 0);
-	else    /* MIR/FIR */
-		omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 1);
-
+	/* SIR when low, else MIR/FIR when HIGH */
+	gpio_set_value(H2_IRDA_FIRSEL_GPIO_PIN, !(state & IR_SIRMODE));
 	return 0;
 }
 #endif
@@ -342,16 +339,31 @@ static struct platform_device *h2_devices[] __initdata = {
 
 static void __init h2_init_smc91x(void)
 {
-	if ((omap_request_gpio(0)) < 0) {
+	if (gpio_request(0, "SMC91x irq") < 0) {
 		printk("Error requesting gpio 0 for smc91x irq\n");
 		return;
 	}
 }
 
+static int tps_setup(struct i2c_client *client, void *context)
+{
+	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
+				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
+
+	return 0;
+}
+
+static struct tps65010_board tps_board = {
+	.base		= H2_TPS_GPIO_BASE,
+	.outmask	= 0x0f,
+	.setup		= tps_setup,
+};
+
 static struct i2c_board_info __initdata h2_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("tps65010", 0x48),
 		.irq            = OMAP_GPIO_IRQ(58),
+		.platform_data	= &tps_board,
 	}, {
 		I2C_BOARD_INFO("isp1301_omap", 0x2d),
 		.irq		= OMAP_GPIO_IRQ(2),
@@ -381,15 +393,6 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_mmc_config h2_mmc_config __initdata = {
-	.mmc[0] = {
-		.enabled	= 1,
-		.wire4		= 1,
-	},
-};
-
-extern struct omap_mmc_platform_data h2_mmc_data;
-
 static struct omap_uart_config h2_uart_config __initdata = {
 	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -400,7 +403,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = {
 
 static struct omap_board_config_kernel h2_config[] __initdata = {
 	{ OMAP_TAG_USB,		&h2_usb_config },
-	{ OMAP_TAG_MMC,		&h2_mmc_config },
 	{ OMAP_TAG_UART,	&h2_uart_config },
 	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
@@ -409,7 +411,7 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
 
 static int h2_nand_dev_ready(struct omap_nand_platform_data *data)
 {
-	return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN);
+	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
 }
 
 static void __init h2_init(void)
@@ -428,8 +430,9 @@ static void __init h2_init(void)
 
 	h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
 	h2_nand_resource.end += SZ_4K - 1;
-	if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN)))
-		h2_nand_data.dev_ready = h2_nand_dev_ready;
+	if (gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+		BUG();
+	gpio_direction_input(H2_NAND_RB_GPIO_PIN);
 
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
@@ -441,10 +444,10 @@ static void __init h2_init(void)
 	/* Irda */
 #if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
 	omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A);
-	if (!(omap_request_gpio(H2_IRDA_FIRSEL_GPIO_PIN))) {
-		omap_set_gpio_direction(H2_IRDA_FIRSEL_GPIO_PIN, 0);
-		h2_irda_data.transceiver_mode = h2_transceiver_mode;
-	}
+	if (gpio_request(H2_IRDA_FIRSEL_GPIO_PIN, "IRDA mode") < 0)
+		BUG();
+	gpio_direction_output(H2_IRDA_FIRSEL_GPIO_PIN, 0);
+	h2_irda_data.transceiver_mode = h2_transceiver_mode;
 #endif
 
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 36085819098c..fdfe793d56f2 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -12,94 +12,55 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/platform_device.h>
+
+#include <linux/i2c/tps65010.h>
+
 #include <mach/mmc.h>
 #include <mach/gpio.h>
 
-#ifdef CONFIG_MMC_OMAP
-static int slot_cover_open;
-static struct device *mmc_device;
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
-static int h3_mmc_set_power(struct device *dev, int slot, int power_on,
+static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
-		power_on ? "on" : "off", vdd);
-#endif
-	if (slot != 0) {
-		dev_err(dev, "No such slot %d\n", slot + 1);
-		return -ENODEV;
-	}
+	if (power_on)
+		gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1);
+	else
+		gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
 
 	return 0;
 }
 
-static int h3_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
-{
-	int ret = 0;
-
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
-		bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
-#endif
-	if (slot != 0) {
-		dev_err(dev, "No such slot %d\n", slot + 1);
-		return -ENODEV;
-	}
-
-	/* Treated on upper level */
-
-	return bus_mode;
-}
-
-static int h3_mmc_get_cover_state(struct device *dev, int slot)
-{
-	BUG_ON(slot != 0);
-
-	return slot_cover_open;
-}
-
-void h3_mmc_slot_cover_handler(void *arg, int state)
-{
-	if (mmc_device == NULL)
-		return;
-
-	slot_cover_open = state;
-	omap_mmc_notify_cover_event(mmc_device, 0, state);
-}
-
-static int h3_mmc_late_init(struct device *dev)
-{
-	int ret = 0;
-
-	mmc_device = dev;
-
-	return ret;
-}
-
-static void h3_mmc_cleanup(struct device *dev)
-{
-}
-
-static struct omap_mmc_platform_data h3_mmc_data = {
+/*
+ * H3 could use the following functions tested:
+ * - mmc_get_cover_state that uses OMAP_MPUIO(1)
+ * - mmc_get_wp that maybe uses OMAP_MPUIO(3)
+ */
+static struct omap_mmc_platform_data mmc1_data = {
 	.nr_slots                       = 1,
-	.switch_slot                    = NULL,
-	.init                           = h3_mmc_late_init,
-	.cleanup                        = h3_mmc_cleanup,
+	.dma_mask			= 0xffffffff,
 	.slots[0]       = {
-		.set_power              = h3_mmc_set_power,
-		.set_bus_mode           = h3_mmc_set_bus_mode,
-		.get_ro                 = NULL,
-		.get_cover_state        = h3_mmc_get_cover_state,
+		.set_power              = mmc_set_power,
 		.ocr_mask               = MMC_VDD_28_29 | MMC_VDD_30_31 |
 					  MMC_VDD_32_33 | MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
 
+static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
+
 void __init h3_mmc_init(void)
 {
-	omap_set_mmc_info(1, &h3_mmc_data);
+	int ret;
+
+	ret = gpio_request(H3_TPS_GPIO_MMC_PWR_EN, "MMC power");
+	if (ret < 0)
+		return;
+	gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
+
+	mmc_data[0] = &mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
 }
 
 #else
@@ -108,7 +69,4 @@ void __init h3_mmc_init(void)
 {
 }
 
-void h3_mmc_slot_cover_handler(void *arg, int state)
-{
-}
 #endif
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index adfcd7b51393..5157eea9be35 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -447,15 +447,6 @@ static struct omap_usb_config h3_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_mmc_config h3_mmc_config __initdata = {
-	.mmc[0] = {
-		.enabled	= 1,
-		.wire4		= 1,
-       },
-};
-
-extern struct omap_mmc_platform_data h3_mmc_data;
-
 static struct omap_uart_config h3_uart_config __initdata = {
 	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -466,7 +457,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
 
 static struct omap_board_config_kernel h3_config[] __initdata = {
 	{ OMAP_TAG_USB,		&h3_usb_config },
-	{ OMAP_TAG_MMC,		&h3_mmc_config },
 	{ OMAP_TAG_UART,	&h3_uart_config },
 	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
@@ -498,7 +488,7 @@ static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
 
 static int nand_dev_ready(struct omap_nand_platform_data *data)
 {
-	return omap_get_gpio_datain(H3_NAND_RB_GPIO_PIN);
+	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
 }
 
 static void __init h3_init(void)
@@ -516,8 +506,9 @@ static void __init h3_init(void)
 
 	nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
 	nand_resource.end += SZ_4K - 1;
-	if (!(omap_request_gpio(H3_NAND_RB_GPIO_PIN)))
-		nand_data.dev_ready = nand_dev_ready;
+	if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+		BUG();
+	nand_data.dev_ready = nand_dev_ready;
 
 	/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
 	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
@@ -537,7 +528,7 @@ static void __init h3_init(void)
 static void __init h3_init_smc91x(void)
 {
 	omap_cfg_reg(W15_1710_GPIO40);
-	if (omap_request_gpio(40) < 0) {
+	if (gpio_request(40, "SMC91x irq") < 0) {
 		printk("Error requesting gpio 40 for smc91x irq\n");
 		return;
 	}
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cbc11be5cd2a..af2fb9070083 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -39,6 +39,7 @@
 #include <mach/common.h>
 #include <mach/mcbsp.h>
 #include <mach/omap-alsa.h>
+#include <mach/mmc.h>
 
 static int innovator_keymap[] = {
 	KEY(0, 0, KEY_F1),
@@ -301,7 +302,7 @@ static void __init innovator_init_smc91x(void)
 			   OMAP1510_FPGA_RST);
 		udelay(750);
 	} else {
-		if ((omap_request_gpio(0)) < 0) {
+		if (gpio_request(0, "SMC91x irq") < 0) {
 			printk("Error requesting gpio 0 for smc91x irq\n");
 			return;
 		}
@@ -360,16 +361,49 @@ static struct omap_lcd_config innovator1610_lcd_config __initdata = {
 };
 #endif
 
-static struct omap_mmc_config innovator_mmc_config __initdata = {
-	.mmc [0] = {
-		.enabled 	= 1,
-		.wire4		= 1,
-		.wp_pin		= OMAP_MPUIO(3),
-		.power_pin	= -1,	/* FPGA F3 UIO42 */
-		.switch_pin	= -1,	/* FPGA F4 UIO43 */
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static int mmc_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+	if (power_on)
+		fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
+				OMAP1510_FPGA_POWER);
+	else
+		fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
+				OMAP1510_FPGA_POWER);
+
+	return 0;
+}
+
+/*
+ * Innovator could use the following functions tested:
+ * - mmc_get_wp that uses OMAP_MPUIO(3)
+ * - mmc_get_cover_state that uses FPGA F4 UIO43
+ */
+static struct omap_mmc_platform_data mmc1_data = {
+	.nr_slots                       = 1,
+	.slots[0]       = {
+		.set_power		= mmc_set_power,
+		.wires			= 4,
+		.name                   = "mmcblk",
 	},
 };
 
+static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
+
+void __init innovator_mmc_init(void)
+{
+	mmc_data[0] = &mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
+}
+
+#else
+static inline void innovator_mmc_init(void)
+{
+}
+#endif
+
 static struct omap_uart_config innovator_uart_config __initdata = {
 	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -377,7 +411,6 @@ static struct omap_uart_config innovator_uart_config __initdata = {
 static struct omap_board_config_kernel innovator_config[] = {
 	{ OMAP_TAG_USB,         NULL },
 	{ OMAP_TAG_LCD,		NULL },
-	{ OMAP_TAG_MMC,		&innovator_mmc_config },
 	{ OMAP_TAG_UART,	&innovator_uart_config },
 };
 
@@ -412,6 +445,7 @@ static void __init innovator_init(void)
 	omap_board_config_size = ARRAY_SIZE(innovator_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
+	innovator_mmc_init();
 }
 
 static void __init innovator_map_io(void)
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 38d9783ac6d6..4970c402a594 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -35,6 +35,7 @@
 #include <mach/aic23.h>
 #include <mach/omapfb.h>
 #include <mach/lcd_mipid.h>
+#include <mach/mmc.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
@@ -102,7 +103,7 @@ static void mipid_shutdown(struct mipid_platform_data *pdata)
 {
 	if (pdata->nreset_gpio != -1) {
 		printk(KERN_INFO "shutdown LCD\n");
-		omap_set_gpio_dataout(pdata->nreset_gpio, 0);
+		gpio_set_value(pdata->nreset_gpio, 0);
 		msleep(120);
 	}
 }
@@ -124,13 +125,13 @@ static void mipid_dev_init(void)
 
 static void ads7846_dev_init(void)
 {
-	if (omap_request_gpio(ADS7846_PENDOWN_GPIO) < 0)
+	if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0)
 		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
 }
 
 static int ads7846_get_pendown_state(void)
 {
-	return !omap_get_gpio_datain(ADS7846_PENDOWN_GPIO);
+	return !gpio_get_value(ADS7846_PENDOWN_GPIO);
 }
 
 static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
@@ -173,26 +174,68 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
 	.pins[0]	= 6,
 };
 
-static struct omap_mmc_config nokia770_mmc_config __initdata = {
-	.mmc[0] = {
-		.enabled	= 0,
-		.wire4		= 0,
-		.wp_pin		= -1,
-		.power_pin	= -1,
-		.switch_pin	= -1,
-	},
-	.mmc[1] = {
-		.enabled	= 0,
-		.wire4		= 0,
-		.wp_pin		= -1,
-		.power_pin	= -1,
-		.switch_pin	= -1,
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+#define NOKIA770_GPIO_MMC_POWER		41
+#define NOKIA770_GPIO_MMC_SWITCH	23
+
+static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+	if (power_on)
+		gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1);
+	else
+		gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0);
+
+	return 0;
+}
+
+static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
+{
+	return gpio_get_value(NOKIA770_GPIO_MMC_SWITCH);
+}
+
+static struct omap_mmc_platform_data nokia770_mmc2_data = {
+	.nr_slots                       = 1,
+	.dma_mask			= 0xffffffff,
+	.slots[0]       = {
+		.set_power		= nokia770_mmc_set_power,
+		.get_cover_state	= nokia770_mmc_get_cover_state,
+		.name                   = "mmcblk",
 	},
 };
 
+static struct omap_mmc_platform_data *nokia770_mmc_data[OMAP16XX_NR_MMC];
+
+static void __init nokia770_mmc_init(void)
+{
+	int ret;
+
+	ret = gpio_request(NOKIA770_GPIO_MMC_POWER, "MMC power");
+	if (ret < 0)
+		return;
+	gpio_direction_output(NOKIA770_GPIO_MMC_POWER, 0);
+
+	ret = gpio_request(NOKIA770_GPIO_MMC_SWITCH, "MMC cover");
+	if (ret < 0) {
+		gpio_free(NOKIA770_GPIO_MMC_POWER);
+		return;
+	}
+	gpio_direction_input(NOKIA770_GPIO_MMC_SWITCH);
+
+	/* Only the second MMC controller is used */
+	nokia770_mmc_data[1] = &nokia770_mmc2_data;
+	omap1_init_mmc(nokia770_mmc_data, OMAP16XX_NR_MMC);
+}
+
+#else
+static inline void nokia770_mmc_init(void)
+{
+}
+#endif
+
 static struct omap_board_config_kernel nokia770_config[] __initdata = {
 	{ OMAP_TAG_USB,		NULL },
-	{ OMAP_TAG_MMC,		&nokia770_mmc_config },
 };
 
 #if	defined(CONFIG_OMAP_DSP)
@@ -228,9 +271,9 @@ static void nokia770_audio_pwr_up(void)
 	/* Turn on codec */
 	aic23_power_up();
 
-	if (omap_get_gpio_datain(HEADPHONE_GPIO))
+	if (gpio_get_value(HEADPHONE_GPIO))
 		/* HP not connected, turn on amplifier */
-		omap_set_gpio_dataout(AMPLIFIER_CTRL_GPIO, 1);
+		gpio_set_value(AMPLIFIER_CTRL_GPIO, 1);
 	else
 		/* HP connected, do not turn on amplifier */
 		printk("HP connected\n");
@@ -250,7 +293,7 @@ static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down);
 static void nokia770_audio_pwr_down(void)
 {
 	/* Turn off amplifier */
-	omap_set_gpio_dataout(AMPLIFIER_CTRL_GPIO, 0);
+	gpio_set_value(AMPLIFIER_CTRL_GPIO, 0);
 
 	/* Turn off codec: schedule delayed work */
 	schedule_delayed_work(&codec_power_down_work, HZ / 20);	/* 50ms */
@@ -335,6 +378,7 @@ static void __init omap_nokia770_init(void)
 	omap_dsp_init();
 	ads7846_dev_init();
 	mipid_dev_init();
+	nokia770_mmc_init();
 }
 
 static void __init omap_nokia770_map_io(void)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 3e766e49f7cc..ff9e67baa5c9 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -188,7 +188,8 @@ static struct gpio_led tps_leds[] = {
 	/* NOTE:  D9 and D2 have hardware blink support.
 	 * Also, D9 requires non-battery power.
 	 */
-	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9", },
+	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
+			.default_trigger = "ide-disk", },
 	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
 	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
 			.default_trigger = "heartbeat", },
@@ -260,7 +261,6 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = {
 	},
 	/* TODO when driver support is ready:
 	 *  - aic23 audio chip at 0x1a
-	 *  - on Mistral, 24c04 eeprom at 0x50
 	 *  - optionally on Mistral, ov9640 camera sensor at 0x30
 	 */
 };
@@ -288,7 +288,7 @@ static void __init osk_init_cf(void)
 		return;
 	}
 	/* the CF I/O IRQ is really active-low */
-	set_irq_type(OMAP_GPIO_IRQ(62), IRQ_TYPE_EDGE_FALLING);
+	set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
 
 static void __init osk_init_irq(void)
@@ -337,11 +337,28 @@ static struct omap_board_config_kernel osk_config[] __initdata = {
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 
 #include <linux/input.h>
+#include <linux/i2c/at24.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
 #include <mach/keypad.h>
 
+static struct at24_platform_data at24c04 = {
+	.byte_len	= SZ_4K / 8,
+	.page_size	= 16,
+};
+
+static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
+	{
+		/* NOTE:  powered from LCD supply */
+		I2C_BOARD_INFO("24c04", 0x50),
+		.platform_data	= &at24c04,
+	},
+	/* TODO when driver support is ready:
+	 *  - optionally ov9640 camera sensor at 0x30
+	 */
+};
+
 static const int osk_keymap[] = {
 	/* KEY(col, row, code) */
 	KEY(0, 0, KEY_F1),		/* SW4 */
@@ -483,23 +500,30 @@ static void __init osk_mistral_init(void)
 	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
 	gpio_request(4, "ts_int");
 	gpio_direction_input(4);
-	set_irq_type(OMAP_GPIO_IRQ(4), IRQ_TYPE_EDGE_FALLING);
+	set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
 
 	spi_register_board_info(mistral_boardinfo,
 			ARRAY_SIZE(mistral_boardinfo));
 
-	/* the sideways button (SW1) is for use as a "wakeup" button */
+	/* the sideways button (SW1) is for use as a "wakeup" button
+	 *
+	 * NOTE:  The Mistral board has the wakeup button (SW1) wired
+	 * to the LCD 3.3V rail, which is powered down during suspend.
+	 * To allow this button to wake up the omap, work around this
+	 * HW bug by rewiring SW1 to use the main 3.3V rail.
+	 */
 	omap_cfg_reg(N15_1610_MPUIO2);
 	if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
 		int ret = 0;
+		int irq = gpio_to_irq(OMAP_MPUIO(2));
 
 		gpio_direction_input(OMAP_MPUIO(2));
-		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQ_TYPE_EDGE_RISING);
+		set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
 #ifdef	CONFIG_PM
 		/* share the IRQ in case someone wants to use the
 		 * button for more than wakeup from system sleep.
 		 */
-		ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)),
+		ret = request_irq(irq,
 				&osk_mistral_wake_interrupt,
 				IRQF_SHARED, "mistral_wakeup",
 				&osk_mistral_wake_interrupt);
@@ -508,7 +532,7 @@ static void __init osk_mistral_init(void)
 			printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
 				ret);
 		} else
-			enable_irq_wake(OMAP_GPIO_IRQ(OMAP_MPUIO(2)));
+			enable_irq_wake(irq);
 #endif
 	} else
 		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
@@ -520,6 +544,9 @@ static void __init osk_mistral_init(void)
 	if (gpio_request(2, "lcd_pwr") == 0)
 		gpio_direction_output(2, 1);
 
+	i2c_register_board_info(1, mistral_i2c_board_info,
+			ARRAY_SIZE(mistral_i2c_board_info));
+
 	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
 }
 #else
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index b58043644a6f..75e32d35afd9 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -255,7 +255,7 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 {
 	int charging, batt, hi, lo, mid;
 
-	charging = !omap_get_gpio_datain(PALMTE_DC_GPIO);
+	charging = !gpio_get_value(PALMTE_DC_GPIO);
 	batt = battery[0];
 	if (charging)
 		batt -= 60;
@@ -316,7 +316,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 
 static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_USB,		&palmte_usb_config },
-	{ OMAP_TAG_MMC,		&palmte_mmc_config },
 	{ OMAP_TAG_LCD,		&palmte_lcd_config },
 	{ OMAP_TAG_UART,	&palmte_uart_config },
 };
@@ -335,11 +334,11 @@ static void palmte_headphones_detect(void *data, int state)
 {
 	if (state) {
 		/* Headphones connected, disable speaker */
-		omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0);
+		gpio_set_value(PALMTE_SPEAKER_GPIO, 0);
 		printk(KERN_INFO "PM: speaker off\n");
 	} else {
 		/* Headphones unplugged, re-enable speaker */
-		omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1);
+		gpio_set_value(PALMTE_SPEAKER_GPIO, 1);
 		printk(KERN_INFO "PM: speaker on\n");
 	}
 }
@@ -347,18 +346,18 @@ static void palmte_headphones_detect(void *data, int state)
 static void __init palmte_misc_gpio_setup(void)
 {
 	/* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */
-	if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) {
+	if (gpio_request(PALMTE_PINTDAV_GPIO, "TSC2102 PINTDAV") < 0) {
 		printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
 		return;
 	}
-	omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1);
+	gpio_direction_input(PALMTE_PINTDAV_GPIO);
 
 	/* Set USB-or-DC-IN pin as input (unused) */
-	if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) {
+	if (gpio_request(PALMTE_USB_OR_DC_GPIO, "USB/DC-IN") < 0) {
 		printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
 		return;
 	}
-	omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1);
+	gpio_direction_input(PALMTE_USB_OR_DC_GPIO);
 }
 
 static void __init omap_palmte_init(void)
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 40f9860a09df..5c001afe8062 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -268,7 +268,7 @@ static struct platform_device *palmtt_devices[] __initdata = {
 
 static int palmtt_get_pendown_state(void)
 {
-	return !omap_get_gpio_datain(6);
+	return !gpio_get_value(6);
 }
 
 static const struct ads7846_platform_data palmtt_ts_info = {
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e719294250b1..cc05257eb1cd 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -239,7 +239,7 @@ static struct platform_device *devices[] __initdata = {
 static int
 palmz71_get_pendown_state(void)
 {
-	return !omap_get_gpio_datain(PALMZ71_PENIRQ_GPIO);
+	return !gpio_get_value(PALMZ71_PENIRQ_GPIO);
 }
 
 static const struct ads7846_platform_data palmz71_ts_info = {
@@ -267,16 +267,6 @@ static struct omap_usb_config palmz71_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-static struct omap_mmc_config palmz71_mmc_config __initdata = {
-	.mmc[0] = {
-		.enabled	= 1,
-		.wire4		= 0,
-		.wp_pin		= PALMZ71_MMC_WP_GPIO,
-		.power_pin	= -1,
-		.switch_pin	= PALMZ71_MMC_IN_GPIO,
-	},
-};
-
 static struct omap_lcd_config palmz71_lcd_config __initdata = {
 	.ctrl_name = "internal",
 };
@@ -287,7 +277,6 @@ static struct omap_uart_config palmz71_uart_config __initdata = {
 
 static struct omap_board_config_kernel palmz71_config[] __initdata = {
 	{OMAP_TAG_USB,	&palmz71_usb_config},
-	{OMAP_TAG_MMC,	&palmz71_mmc_config},
 	{OMAP_TAG_LCD,	&palmz71_lcd_config},
 	{OMAP_TAG_UART,	&palmz71_uart_config},
 };
@@ -295,13 +284,13 @@ static struct omap_board_config_kernel palmz71_config[] __initdata = {
 static irqreturn_t
 palmz71_powercable(int irq, void *dev_id)
 {
-	if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
+	if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) {
 		printk(KERN_INFO "PM: Power cable connected\n");
-		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
+		set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
 				IRQ_TYPE_EDGE_FALLING);
 	} else {
 		printk(KERN_INFO "PM: Power cable disconnected\n");
-		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
+		set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
 				IRQ_TYPE_EDGE_RISING);
 	}
 	return IRQ_HANDLED;
@@ -323,29 +312,28 @@ palmz71_gpio_setup(int early)
 {
 	if (early) {
 		/* Only set GPIO1 so we have a working serial */
-		omap_set_gpio_dataout(1, 1);
-		omap_set_gpio_direction(1, 0);
+		gpio_direction_output(1, 1);
 	} else {
 		/* Set MMC/SD host WP pin as input */
-		if (omap_request_gpio(PALMZ71_MMC_WP_GPIO)) {
+		if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) {
 			printk(KERN_ERR "Could not reserve WP GPIO!\n");
 			return;
 		}
-		omap_set_gpio_direction(PALMZ71_MMC_WP_GPIO, 1);
+		gpio_direction_input(PALMZ71_MMC_WP_GPIO);
 
 		/* Monitor the Power-cable-connected signal */
-		if (omap_request_gpio(PALMZ71_USBDETECT_GPIO)) {
+		if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) {
 			printk(KERN_ERR
 				"Could not reserve cable signal GPIO!\n");
 			return;
 		}
-		omap_set_gpio_direction(PALMZ71_USBDETECT_GPIO, 1);
-		if (request_irq(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
+		gpio_direction_input(PALMZ71_USBDETECT_GPIO);
+		if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
 				palmz71_powercable, IRQF_SAMPLE_RANDOM,
 				"palmz71-cable", 0))
 			printk(KERN_ERR
 					"IRQ request for power cable failed!\n");
-		palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0);
+		palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0);
 	}
 }
 
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index b715917bfdaf..3b9f907aa899 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -205,7 +205,7 @@ static struct platform_device *devices[] __initdata = {
 
 static int nand_dev_ready(struct omap_nand_platform_data *data)
 {
-	return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN);
+	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
 static struct omap_uart_config perseus2_uart_config __initdata = {
@@ -223,8 +223,9 @@ static struct omap_board_config_kernel perseus2_config[] __initdata = {
 
 static void __init omap_perseus2_init(void)
 {
-	if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
-		nand_data.dev_ready = nand_dev_ready;
+	if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+		BUG();
+	nand_data.dev_ready = nand_dev_ready;
 
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 0be4ebaa2842..66a4d7d5255d 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,30 +12,20 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/platform_device.h>
+
 #include <mach/hardware.h>
 #include <mach/mmc.h>
 #include <mach/gpio.h>
 
-#ifdef CONFIG_MMC_OMAP
-static int slot_cover_open;
-static struct device *mmc_device;
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
-static int sx1_mmc_set_power(struct device *dev, int slot, int power_on,
+static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
 	int err;
 	u8 dat = 0;
 
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
-		power_on ? "on" : "off", vdd);
-#endif
-
-	if (slot != 0) {
-		dev_err(dev, "No such slot %d\n", slot + 1);
-		return -ENODEV;
-	}
-
 	err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
 	if (err < 0)
 		return err;
@@ -48,68 +38,23 @@ static int sx1_mmc_set_power(struct device *dev, int slot, int power_on,
 	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
 }
 
-static int sx1_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
-{
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
-		bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
-#endif
-	if (slot != 0) {
-		dev_err(dev, "No such slot %d\n", slot + 1);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static int sx1_mmc_get_cover_state(struct device *dev, int slot)
-{
-	BUG_ON(slot != 0);
-
-	return slot_cover_open;
-}
-
-void sx1_mmc_slot_cover_handler(void *arg, int state)
-{
-	if (mmc_device == NULL)
-		return;
-
-	slot_cover_open = state;
-	omap_mmc_notify_cover_event(mmc_device, 0, state);
-}
-
-static int sx1_mmc_late_init(struct device *dev)
-{
-	int ret = 0;
-
-	mmc_device = dev;
-
-	return ret;
-}
-
-static void sx1_mmc_cleanup(struct device *dev)
-{
-}
-
-static struct omap_mmc_platform_data sx1_mmc_data = {
+/* Cover switch is at OMAP_MPUIO(3) */
+static struct omap_mmc_platform_data mmc1_data = {
 	.nr_slots                       = 1,
-	.switch_slot                    = NULL,
-	.init                           = sx1_mmc_late_init,
-	.cleanup                        = sx1_mmc_cleanup,
 	.slots[0]       = {
-		.set_power              = sx1_mmc_set_power,
-		.set_bus_mode           = sx1_mmc_set_bus_mode,
-		.get_ro                 = NULL,
-		.get_cover_state        = sx1_mmc_get_cover_state,
+		.set_power              = mmc_set_power,
 		.ocr_mask               = MMC_VDD_28_29 | MMC_VDD_30_31 |
 					  MMC_VDD_32_33 | MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
 
+static struct omap_mmc_platform_data *mmc_data[OMAP15XX_NR_MMC];
+
 void __init sx1_mmc_init(void)
 {
-	omap_set_mmc_info(1, &sx1_mmc_data);
+	mmc_data[0] = &mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
 }
 
 #else
@@ -118,7 +63,4 @@ void __init sx1_mmc_init(void)
 {
 }
 
-void sx1_mmc_slot_cover_handler(void *arg, int state)
-{
-}
 #endif
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 130bcc6fd082..8171fe0ca082 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -378,15 +378,6 @@ static struct omap_usb_config sx1_usb_config __initdata = {
 	.pins[2]	= 0,
 };
 
-/*----------- MMC -------------------------*/
-
-static struct omap_mmc_config sx1_mmc_config __initdata = {
-	.mmc [0] = {
-		.enabled	= 1,
-		.wire4		= 0,
-	},
-};
-
 /*----------- LCD -------------------------*/
 
 static struct platform_device sx1_lcd_device = {
@@ -414,7 +405,6 @@ static struct omap_uart_config sx1_uart_config __initdata = {
 
 static struct omap_board_config_kernel sx1_config[] __initdata = {
 	{ OMAP_TAG_USB,	&sx1_usb_config },
-	{ OMAP_TAG_MMC,	&sx1_mmc_config },
 	{ OMAP_TAG_LCD,	&sx1_lcd_config },
 	{ OMAP_TAG_UART,	&sx1_uart_config },
 };
@@ -436,14 +426,9 @@ static void __init omap_sx1_init(void)
 	omap_request_gpio(1);	/* A_IRDA_OFF */
 	omap_request_gpio(11);	/* A_SWITCH */
 	omap_request_gpio(15);	/* A_USB_ON */
-	omap_set_gpio_direction(1, 0);/* gpio1 -> output */
-	omap_set_gpio_direction(11, 0);/* gpio11 -> output */
-	omap_set_gpio_direction(15, 0);/* gpio15 -> output */
-	/* set GPIO data */
-	omap_set_gpio_dataout(1, 1);/*A_IRDA_OFF = 1 */
-	omap_set_gpio_dataout(11, 0);/*A_SWITCH = 0 */
-	omap_set_gpio_dataout(15, 0);/*A_USB_ON = 0 */
-
+	gpio_direction_output(1, 1);	/*A_IRDA_OFF = 1 */
+	gpio_direction_output(11, 0);	/*A_SWITCH = 0 */
+	gpio_direction_output(15, 0);	/*A_USB_ON = 0 */
 }
 /*----------------------------------------*/
 static void __init omap_sx1_init_irq(void)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 45a01311669a..c224f3c64235 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/notifier.h>
@@ -140,21 +141,12 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
 	.pins[2]	= 6,
 };
 
-static struct omap_mmc_config voiceblue_mmc_config __initdata = {
-	.mmc[0] = {
-		.enabled	= 1,
-		.power_pin	= 2,
-		.switch_pin	= -1,
-	},
-};
-
 static struct omap_uart_config voiceblue_uart_config __initdata = {
 	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
 static struct omap_board_config_kernel voiceblue_config[] = {
 	{ OMAP_TAG_USB,  &voiceblue_usb_config },
-	{ OMAP_TAG_MMC,  &voiceblue_mmc_config },
 	{ OMAP_TAG_UART, &voiceblue_uart_config },
 };
 
@@ -168,29 +160,27 @@ static void __init voiceblue_init_irq(void)
 static void __init voiceblue_init(void)
 {
 	/* Watchdog */
-	omap_request_gpio(0);
+	gpio_request(0, "Watchdog");
 	/* smc91x reset */
-	omap_request_gpio(7);
-	omap_set_gpio_direction(7, 0);
-	omap_set_gpio_dataout(7, 1);
+	gpio_request(7, "SMC91x reset");
+	gpio_direction_output(7, 1);
 	udelay(2);	/* wait at least 100ns */
-	omap_set_gpio_dataout(7, 0);
+	gpio_set_value(7, 0);
 	mdelay(50);	/* 50ms until PHY ready */
 	/* smc91x interrupt pin */
-	omap_request_gpio(8);
+	gpio_request(8, "SMC91x irq");
 	/* 16C554 reset*/
-	omap_request_gpio(6);
-	omap_set_gpio_direction(6, 0);
-	omap_set_gpio_dataout(6, 0);
+	gpio_request(6, "16C554 reset");
+	gpio_direction_output(6, 0);
 	/* 16C554 interrupt pins */
-	omap_request_gpio(12);
-	omap_request_gpio(13);
-	omap_request_gpio(14);
-	omap_request_gpio(15);
-	set_irq_type(OMAP_GPIO_IRQ(12), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(14), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(15), IRQ_TYPE_EDGE_RISING);
+	gpio_request(12, "16C554 irq");
+	gpio_request(13, "16C554 irq");
+	gpio_request(14, "16C554 irq");
+	gpio_request(15, "16C554 irq");
+	set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
 
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
 	omap_board_config = voiceblue_config;
@@ -244,19 +234,18 @@ static int wdt_gpio_state;
 
 void voiceblue_wdt_enable(void)
 {
-	omap_set_gpio_direction(0, 0);
-	omap_set_gpio_dataout(0, 0);
-	omap_set_gpio_dataout(0, 1);
-	omap_set_gpio_dataout(0, 0);
+	gpio_direction_output(0, 0);
+	gpio_set_value(0, 1);
+	gpio_set_value(0, 0);
 	wdt_gpio_state = 0;
 }
 
 void voiceblue_wdt_disable(void)
 {
-	omap_set_gpio_dataout(0, 0);
-	omap_set_gpio_dataout(0, 1);
-	omap_set_gpio_dataout(0, 0);
-	omap_set_gpio_direction(0, 1);
+	gpio_set_value(0, 0);
+	gpio_set_value(0, 1);
+	gpio_set_value(0, 0);
+	gpio_direction_input(0);
 }
 
 void voiceblue_wdt_ping(void)
@@ -265,7 +254,7 @@ void voiceblue_wdt_ping(void)
 		return;
 
 	wdt_gpio_state = !wdt_gpio_state;
-	omap_set_gpio_dataout(0, wdt_gpio_state);
+	gpio_set_value(0, wdt_gpio_state);
 }
 
 void voiceblue_reset(void)
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 5635b511ab6f..c1dcdf18d8dd 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -705,7 +705,6 @@ static struct clk bclk_16xx = {
 
 static struct clk mmc1_ck = {
 	.name		= "mmc_ck",
-	.id		= 1,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
@@ -720,7 +719,7 @@ static struct clk mmc1_ck = {
 
 static struct clk mmc2_ck = {
 	.name		= "mmc_ck",
-	.id		= 2,
+	.id		= 1,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index e382b438c64e..77382d8b6b2f 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -22,6 +22,7 @@
 #include <mach/board.h>
 #include <mach/mux.h>
 #include <mach/gpio.h>
+#include <mach/mmc.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -99,6 +100,95 @@ static inline void omap_init_mbox(void)
 static inline void omap_init_mbox(void) { }
 #endif
 
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
+			int controller_nr)
+{
+	if (controller_nr == 0) {
+		omap_cfg_reg(MMC_CMD);
+		omap_cfg_reg(MMC_CLK);
+		omap_cfg_reg(MMC_DAT0);
+		if (cpu_is_omap1710()) {
+			omap_cfg_reg(M15_1710_MMC_CLKI);
+			omap_cfg_reg(P19_1710_MMC_CMDDIR);
+			omap_cfg_reg(P20_1710_MMC_DATDIR0);
+		}
+		if (mmc_controller->slots[0].wires == 4) {
+			omap_cfg_reg(MMC_DAT1);
+			/* NOTE: DAT2 can be on W10 (here) or M15 */
+			if (!mmc_controller->slots[0].nomux)
+				omap_cfg_reg(MMC_DAT2);
+			omap_cfg_reg(MMC_DAT3);
+		}
+	}
+
+	/* Block 2 is on newer chips, and has many pinout options */
+	if (cpu_is_omap16xx() && controller_nr == 1) {
+		if (!mmc_controller->slots[1].nomux) {
+			omap_cfg_reg(Y8_1610_MMC2_CMD);
+			omap_cfg_reg(Y10_1610_MMC2_CLK);
+			omap_cfg_reg(R18_1610_MMC2_CLKIN);
+			omap_cfg_reg(W8_1610_MMC2_DAT0);
+			if (mmc_controller->slots[1].wires == 4) {
+				omap_cfg_reg(V8_1610_MMC2_DAT1);
+				omap_cfg_reg(W15_1610_MMC2_DAT2);
+				omap_cfg_reg(R10_1610_MMC2_DAT3);
+			}
+
+			/* These are needed for the level shifter */
+			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
+			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
+			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
+		}
+
+		/* Feedback clock must be set on OMAP-1710 MMC2 */
+		if (cpu_is_omap1710())
+			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
+					MOD_CONF_CTRL_1);
+	}
+}
+
+void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+			int nr_controllers)
+{
+	int i;
+
+	for (i = 0; i < nr_controllers; i++) {
+		unsigned long base, size;
+		unsigned int irq = 0;
+
+		if (!mmc_data[i])
+			continue;
+
+		omap1_mmc_mux(mmc_data[i], i);
+
+		switch (i) {
+		case 0:
+			base = OMAP1_MMC1_BASE;
+			irq = INT_MMC;
+			break;
+		case 1:
+			if (!cpu_is_omap16xx())
+				return;
+			base = OMAP1_MMC2_BASE;
+			irq = INT_1610_MMC2;
+			break;
+		default:
+			continue;
+		}
+		size = OMAP1_MMC_SIZE;
+
+		omap_mmc_add(i, base, size, irq, mmc_data[i]);
+	};
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 #if defined(CONFIG_OMAP_STI)
 
 #define OMAP1_STI_BASE		0xfffea000
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 04995381aa5c..4f2b8a7adb19 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -177,9 +177,9 @@ void omap1510_fpga_init_irq(void)
 	 * NOTE: For general GPIO/MPUIO access and interrupts, please see
 	 * gpio.[ch]
 	 */
-	omap_request_gpio(13);
-	omap_set_gpio_direction(13, 1);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
+	gpio_request(13, "FPGA irq");
+	gpio_direction_input(13);
+	set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
 }
 
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 13083d7e692d..89bb8756f450 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <mach/cpu.h>
 
 #define OMAP_DIE_ID_0		0xfffe1800
 #define OMAP_DIE_ID_1		0xfffe1804
@@ -30,6 +31,8 @@ struct omap_id {
 	u32	type;		/* Cpu id bits [31:08], cpu class bits [07:00] */
 };
 
+static unsigned int omap_revision;
+
 /* Register values to detect the OMAP version */
 static struct omap_id omap_ids[] __initdata = {
 	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
@@ -53,6 +56,12 @@ static struct omap_id omap_ids[] __initdata = {
 	{ .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000},
 };
 
+unsigned int omap_rev(void)
+{
+	return omap_revision;
+}
+EXPORT_SYMBOL(omap_rev);
+
 /*
  * Get OMAP type from PROD_ID.
  * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
@@ -121,17 +130,18 @@ void __init omap_check_revision(void)
 	omap_id = omap_readl(OMAP32_ID_0);
 
 #ifdef DEBUG
-	printk("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
-	printk("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
+	printk(KERN_DEBUG "OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
+	printk(KERN_DEBUG "OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
 		omap_readl(OMAP_DIE_ID_1),
 	       (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
-	printk("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0));
-	printk("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
+	printk(KERN_DEBUG "OMAP_PRODUCTION_ID_0: 0x%08x\n",
+		omap_readl(OMAP_PRODUCTION_ID_0));
+	printk(KERN_DEBUG "OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
 		omap_readl(OMAP_PRODUCTION_ID_1),
 		omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
-	printk("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
-	printk("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
-	printk("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
+	printk(KERN_DEBUG "OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
+	printk(KERN_DEBUG "OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
+	printk(KERN_DEBUG "JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
 #endif
 
 	system_serial_high = omap_readl(OMAP_DIE_ID_0);
@@ -140,7 +150,7 @@ void __init omap_check_revision(void)
 	/* First check only the major version in a safe way */
 	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
 		if (jtag_id == (omap_ids[i].jtag_id)) {
-			system_rev = omap_ids[i].type;
+			omap_revision = omap_ids[i].type;
 			break;
 		}
 	}
@@ -148,7 +158,7 @@ void __init omap_check_revision(void)
 	/* Check if we can find the die revision */
 	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
 		if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
-			system_rev = omap_ids[i].type;
+			omap_revision = omap_ids[i].type;
 			break;
 		}
 	}
@@ -158,38 +168,35 @@ void __init omap_check_revision(void)
 		if (jtag_id == omap_ids[i].jtag_id
 		    && die_rev == omap_ids[i].die_rev
 		    && omap_id == omap_ids[i].omap_id) {
-			system_rev = omap_ids[i].type;
+			omap_revision = omap_ids[i].type;
 			break;
 		}
 	}
 
 	/* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
-	cpu_type = system_rev >> 24;
+	cpu_type = omap_revision >> 24;
 
 	switch (cpu_type) {
 	case 0x07:
-		system_rev |= 0x07;
+		omap_revision |= 0x07;
 		break;
 	case 0x03:
 	case 0x15:
-		system_rev |= 0x15;
+		omap_revision |= 0x15;
 		break;
 	case 0x16:
 	case 0x17:
-		system_rev |= 0x16;
-		break;
-	case 0x24:
-		system_rev |= 0x24;
+		omap_revision |= 0x16;
 		break;
 	default:
-		printk("Unknown OMAP cpu type: 0x%02x\n", cpu_type);
+		printk(KERN_INFO "Unknown OMAP cpu type: 0x%02x\n", cpu_type);
 	}
 
-	printk("OMAP%04x", system_rev >> 16);
-	if ((system_rev >> 8) & 0xff)
-		printk("%x", (system_rev >> 8) & 0xff);
-	printk(" revision %i handled as %02xxx id: %08x%08x\n",
-	       die_rev, system_rev & 0xff, system_serial_low,
+	printk(KERN_INFO "OMAP%04x", omap_revision >> 16);
+	if ((omap_revision >> 8) & 0xff)
+		printk(KERN_INFO "%x", (omap_revision >> 8) & 0xff);
+	printk(KERN_INFO " revision %i handled as %02xxx id: %08x%08x\n",
+	       die_rev, omap_revision & 0xff, system_serial_low,
 	       system_serial_high);
 }
 
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index b3bd8ca85118..4c3e582f3d3c 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -128,7 +128,7 @@ void __init omap1_map_common_io(void)
  * Common low-level hardware init for omap1. This should only get called from
  * board specific init.
  */
-void __init omap1_init_common_hw()
+void __init omap1_init_common_hw(void)
 {
 	/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
 	 * on a Posted Write in the TIPB Bridge".
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 71fe2cc7f7cf..17c9d0e04216 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -65,8 +65,8 @@ void h2p2_dbg_leds_event(led_event_t evt)
 		/* all leds off during suspend or shutdown */
 
 		if (! machine_is_omap_perseus2()) {
-			omap_set_gpio_dataout(GPIO_TIMER, 0);
-			omap_set_gpio_dataout(GPIO_IDLE, 0);
+			gpio_set_value(GPIO_TIMER, 0);
+			gpio_set_value(GPIO_IDLE, 0);
 		}
 
 		__raw_writew(~0, &fpga->leds);
@@ -94,7 +94,7 @@ void h2p2_dbg_leds_event(led_event_t evt)
 		if (machine_is_omap_perseus2())
 			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
 		else {
-			omap_set_gpio_dataout(GPIO_TIMER, led_state & LED_TIMER_ON);
+			gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
 			goto done;
 		}
 
@@ -106,7 +106,7 @@ void h2p2_dbg_leds_event(led_event_t evt)
 		if (machine_is_omap_perseus2())
 			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
 		else {
-			omap_set_gpio_dataout(GPIO_IDLE, 1);
+			gpio_set_value(GPIO_IDLE, 1);
 			goto done;
 		}
 
@@ -116,7 +116,7 @@ void h2p2_dbg_leds_event(led_event_t evt)
 		if (machine_is_omap_perseus2())
 			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
 		else {
-			omap_set_gpio_dataout(GPIO_IDLE, 0);
+			gpio_set_value(GPIO_IDLE, 0);
 			goto done;
 		}
 
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 98e789622dfd..499d7ad8697d 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -44,8 +44,8 @@ static void mistral_setled(void)
 		green = 1;
 	/* else both sides are disabled */
 
-	omap_set_gpio_dataout(GPIO_LED_GREEN, green);
-	omap_set_gpio_dataout(GPIO_LED_RED, red);
+	gpio_set_value(GPIO_LED_GREEN, green);
+	gpio_set_value(GPIO_LED_RED, red);
 }
 
 #endif
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 6cdad93c4a00..8cbf2562dcaa 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -47,14 +47,14 @@ omap_leds_init(void)
 		 * that's a different kind of LED (just one color at a time).
 		 */
 		omap_cfg_reg(P18_1610_GPIO3);
-		if (omap_request_gpio(3) == 0)
-			omap_set_gpio_direction(3, 0);
+		if (gpio_request(3, "LED red") == 0)
+			gpio_direction_output(3, 1);
 		else
 			printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
 
 		omap_cfg_reg(MPUIO4);
-		if (omap_request_gpio(OMAP_MPUIO(4)) == 0)
-			omap_set_gpio_direction(OMAP_MPUIO(4), 0);
+		if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
+			gpio_direction_output(OMAP_MPUIO(4), 1);
 		else
 			printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
 	}
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 770d256c790b..9774c1f5311e 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -226,7 +226,8 @@ void omap_pm_suspend(void)
 {
 	unsigned long arg0 = 0, arg1 = 0;
 
-	printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev);
+	printk(KERN_INFO "PM: OMAP%x is trying to enter deep sleep...\n",
+		omap_rev());
 
 	omap_serial_wake_trigger(1);
 
@@ -421,7 +422,8 @@ void omap_pm_suspend(void)
 
 	omap_serial_wake_trigger(0);
 
-	printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
+	printk(KERN_INFO "PM: OMAP%x is re-starting from deep sleep...\n",
+		omap_rev());
 }
 
 #if defined(DEBUG) && defined(CONFIG_PROC_FS)
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 528691d5cb51..0002084e0655 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -244,22 +244,22 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr)
 {
 	int ret;
 
-	ret = omap_request_gpio(gpio_nr);
+	ret = gpio_request(gpio_nr, "UART wake");
 	if (ret < 0) {
 		printk(KERN_ERR "Could not request UART wake GPIO: %i\n",
 		       gpio_nr);
 		return;
 	}
-	omap_set_gpio_direction(gpio_nr, 1);
-	ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt,
+	gpio_direction_input(gpio_nr);
+	ret = request_irq(gpio_to_irq(gpio_nr), &omap_serial_wake_interrupt,
 			  IRQF_TRIGGER_RISING, "serial wakeup", NULL);
 	if (ret) {
-		omap_free_gpio(gpio_nr);
+		gpio_free(gpio_nr);
 		printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n",
 		       gpio_nr);
 		return;
 	}
-	enable_irq_wake(OMAP_GPIO_IRQ(gpio_nr));
+	enable_irq_wake(gpio_to_irq(gpio_nr));
 }
 
 static int __init omap_serial_wakeup_init(void)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4832fcc7d04a..3754b79092ab 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -55,3 +55,7 @@ config MACH_OMAP_LDP
 config MACH_OVERO
 	bool "Gumstix Overo board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP3_PANDORA
+	bool "OMAP3 Pandora"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
\ No newline at end of file
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index c69392372c99..bbd12bc10fdc 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -27,9 +27,15 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
-obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o
+obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o \
+					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
-obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
-obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
-obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
+obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
+					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
+					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
+					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
+					   mmc-twl4030.o
 
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 24688efaa445..83fa37211d77 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
+#include <linux/i2c/twl4030.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -35,6 +36,7 @@
 #include <mach/common.h>
 #include <mach/gpmc.h>
 
+#include "mmc-twl4030.h"
 
 #define	SDP2430_FLASH_CS	0
 #define	SDP2430_SMC91X_CS	5
@@ -168,13 +170,13 @@ static inline void __init sdp2430_init_smc91x(void)
 	sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
 	udelay(100);
 
-	if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) {
+	if (gpio_request(OMAP24XX_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
 			OMAP24XX_ETHR_GPIO_IRQ);
 		gpmc_cs_free(eth_cs);
 		goto out;
 	}
-	omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
+	gpio_direction_input(OMAP24XX_ETHR_GPIO_IRQ);
 
 out:
 	clk_disable(gpmc_fck);
@@ -197,12 +199,58 @@ static struct omap_board_config_kernel sdp2430_config[] = {
 	{OMAP_TAG_UART, &sdp2430_uart_config},
 };
 
+
+static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_platform_data sdp2430_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.gpio		= &sdp2430_gpio_data,
+};
+
+static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_24XX_SYS_NIRQ,
+		.platform_data = &sdp2430_twldata,
+	},
+};
+
+static int __init omap2430_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 400, NULL, 0);
+	omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo,
+			ARRAY_SIZE(sdp2430_i2c_boardinfo));
+	return 0;
+}
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.ext_clock	= 1,
+	},
+	{}	/* Terminator */
+};
+
 static void __init omap_2430sdp_init(void)
 {
+	omap2430_i2c_init();
+
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_board_config = sdp2430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap_serial_init();
+	twl4030_mmc_init(mmc);
 }
 
 static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 989ad152d7f8..bf1e5d32c2a3 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -236,13 +236,13 @@ static inline void __init apollon_init_smc91x(void)
 	udelay(100);
 
 	omap_cfg_reg(W4__24XX_GPIO74);
-	if (omap_request_gpio(APOLLON_ETHR_GPIO_IRQ) < 0) {
+	if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
 			APOLLON_ETHR_GPIO_IRQ);
 		gpmc_cs_free(APOLLON_ETH_CS);
 		goto out;
 	}
-	omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1);
+	gpio_direction_input(APOLLON_ETHR_GPIO_IRQ);
 
 out:
 	clk_disable(gpmc_fck);
@@ -261,16 +261,6 @@ static struct omap_uart_config apollon_uart_config __initdata = {
 	.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
 };
 
-static struct omap_mmc_config apollon_mmc_config __initdata = {
-	.mmc [0] = {
-		.enabled 	= 1,
-		.wire4		= 1,
-		.wp_pin		= -1,
-		.power_pin	= -1,
-		.switch_pin	= -1,
-	},
-};
-
 static struct omap_usb_config apollon_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 0x14,	/* 0:dev 1:host1 2:disable */
@@ -284,7 +274,6 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
 
 static struct omap_board_config_kernel apollon_config[] = {
 	{ OMAP_TAG_UART,	&apollon_uart_config },
-	{ OMAP_TAG_MMC,		&apollon_mmc_config },
 	{ OMAP_TAG_USB,		&apollon_usb_config },
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
@@ -327,15 +316,15 @@ static void __init apollon_sw_init(void)
 	/* Enter SW - Y11 */
 	omap_cfg_reg(Y11_242X_GPIO16);
 	omap_request_gpio(SW_ENTER_GPIO16);
-	omap_set_gpio_direction(SW_ENTER_GPIO16, 1);
+	gpio_direction_input(SW_ENTER_GPIO16);
 	/* Up SW - AA12 */
 	omap_cfg_reg(AA12_242X_GPIO17);
 	omap_request_gpio(SW_UP_GPIO17);
-	omap_set_gpio_direction(SW_UP_GPIO17, 1);
+	gpio_direction_input(SW_UP_GPIO17);
 	/* Down SW - AA8 */
 	omap_cfg_reg(AA8_242X_GPIO58);
 	omap_request_gpio(SW_DOWN_GPIO58);
-	omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
+	gpio_direction_input(SW_DOWN_GPIO58);
 
 	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
@@ -359,9 +348,8 @@ static void __init apollon_usb_init(void)
 	/* USB device */
 	/* DEVICE_SUSPEND */
 	omap_cfg_reg(P21_242X_GPIO12);
-	omap_request_gpio(12);
-	omap_set_gpio_direction(12, 0);		/* OUT */
-	omap_set_gpio_dataout(12, 0);
+	gpio_request(12, "USB suspend");
+	gpio_direction_output(12, 0);
 }
 
 static void __init omap_apollon_init(void)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 9ba097868e72..3b34c20d1df4 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -41,19 +41,8 @@ static struct omap_uart_config generic_uart_config __initdata = {
 	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
-static struct omap_mmc_config generic_mmc_config __initdata = {
-	.mmc [0] = {
-		.enabled 	= 0,
-		.wire4		= 0,
-		.wp_pin		= -1,
-		.power_pin	= -1,
-		.switch_pin	= -1,
-	},
-};
-
 static struct omap_board_config_kernel generic_config[] = {
 	{ OMAP_TAG_UART,	&generic_uart_config },
-	{ OMAP_TAG_MMC,		&generic_mmc_config },
 };
 
 static void __init omap_generic_init(void)
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 2fef2c845083..5e9b14675b1e 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/i2c.h>
+#include <linux/i2c/at24.h>
 #include <linux/input.h>
 #include <linux/err.h>
 #include <linux/clk.h>
@@ -372,31 +373,33 @@ static struct omap_uart_config h4_uart_config __initdata = {
 	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
-static struct omap_mmc_config h4_mmc_config __initdata = {
-	.mmc [0] = {
-		.enabled	= 1,
-		.wire4		= 1,
-		.wp_pin		= -1,
-		.power_pin	= -1,
-		.switch_pin	= -1,
-	},
-};
-
 static struct omap_lcd_config h4_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel h4_config[] = {
 	{ OMAP_TAG_UART,	&h4_uart_config },
-	{ OMAP_TAG_MMC,		&h4_mmc_config },
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
+static struct at24_platform_data m24c01 = {
+	.byte_len	= SZ_1K / 8,
+	.page_size	= 16,
+};
+
 static struct i2c_board_info __initdata h4_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("isp1301_omap", 0x2d),
 		.irq		= OMAP_GPIO_IRQ(125),
 	},
+	{	/* EEPROM on mainboard */
+		I2C_BOARD_INFO("24c01", 0x52),
+		.platform_data	= &m24c01,
+	},
+	{	/* EEPROM on cpu card */
+		I2C_BOARD_INFO("24c01", 0x57),
+		.platform_data	= &m24c01,
+	},
 };
 
 static void __init omap_h4_init(void)
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 1ea59986aa7a..aa6972781e4a 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -38,11 +39,69 @@
 #include <asm/delay.h>
 #include <mach/control.h>
 
+#include "mmc-twl4030.h"
+
+#define SDP3430_SMC91X_CS	3
+
+static struct resource ldp_smc911x_resources[] = {
+	[0] = {
+		.start	= OMAP34XX_ETHR_START,
+		.end	= OMAP34XX_ETHR_START + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device ldp_smc911x_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ldp_smc911x_resources),
+	.resource	= ldp_smc911x_resources,
+};
+
+static struct platform_device *ldp_devices[] __initdata = {
+	&ldp_smc911x_device,
+};
+
+static inline void __init ldp_init_smc911x(void)
+{
+	int eth_cs;
+	unsigned long cs_mem_base;
+	int eth_gpio = 0;
+
+	eth_cs = LDP_SMC911X_CS;
+
+	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc911x\n");
+		return;
+	}
+
+	ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
+	ldp_smc911x_resources[0].end   = cs_mem_base + 0xf;
+	udelay(100);
+
+	eth_gpio = LDP_SMC911X_GPIO;
+
+	ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+
+	if (omap_request_gpio(eth_gpio) < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+				eth_gpio);
+		return;
+	}
+	gpio_direction_input(eth_gpio);
+}
+
 static void __init omap_ldp_init_irq(void)
 {
 	omap2_init_common_hw();
 	omap_init_irq();
 	omap_gpio_init();
+	ldp_init_smc911x();
 }
 
 static struct omap_uart_config ldp_uart_config __initdata = {
@@ -53,20 +112,56 @@ static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_UART,	&ldp_uart_config },
 };
 
+static struct twl4030_gpio_platform_data ldp_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_platform_data ldp_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.gpio		= &ldp_gpio_data,
+};
+
+static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &ldp_twldata,
+	},
+};
+
 static int __init omap_i2c_init(void)
 {
-	omap_register_i2c_bus(1, 2600, NULL, 0);
+	omap_register_i2c_bus(1, 2600, ldp_i2c_boardinfo,
+			ARRAY_SIZE(ldp_i2c_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
 	return 0;
 }
 
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{}	/* Terminator */
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap_i2c_init();
+	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	omap_board_config = ldp_config;
 	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	omap_serial_init();
+	twl4030_mmc_init(mmc);
 }
 
 static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index baa79674e9d5..9e5ada01b5fa 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -38,7 +38,9 @@
 #include <mach/common.h>
 #include <mach/gpmc.h>
 #include <mach/nand.h>
+#include <mach/mux.h>
 
+#include "mmc-twl4030.h"
 
 #define GPMC_CS0_BASE  0x60
 #define GPMC_CS_SIZE   0x30
@@ -103,6 +105,78 @@ static struct omap_uart_config omap3_beagle_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 8,
+		.gpio_wp	= 29,
+	},
+	{}	/* Terminator */
+};
+
+static struct gpio_led gpio_leds[];
+
+static int beagle_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+
+	/* REVISIT: need ehci-omap hooks for external VBUS
+	 * power switch and overcurrent detect
+	 */
+
+	gpio_request(gpio + 1, "EHCI_nOC");
+	gpio_direction_input(gpio + 1);
+
+	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+	gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
+	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
+
+	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data beagle_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.pullups	= BIT(1),
+	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+				| BIT(15) | BIT(16) | BIT(17),
+	.setup		= beagle_twl_gpio_setup,
+};
+
+static struct twl4030_platform_data beagle_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.gpio		= &beagle_gpio_data,
+};
+
+static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &beagle_twldata,
+	},
+};
+
+static int __init omap3_beagle_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
+			ARRAY_SIZE(beagle_i2c_boardinfo));
+#ifdef CONFIG_I2C2_OMAP_BEAGLE
+	omap_register_i2c_bus(2, 400, NULL, 0);
+#endif
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
 static void __init omap3_beagle_init_irq(void)
 {
 	omap2_init_common_hw();
@@ -130,6 +204,11 @@ static struct gpio_led gpio_leds[] = {
 		.default_trigger	= "mmc0",
 		.gpio			= 149,
 	},
+	{
+		.name			= "beagleboard::pmu_stat",
+		.gpio			= -EINVAL,	/* gets replaced */
+		.active_low		= true,
+	},
 };
 
 static struct gpio_led_platform_data gpio_led_info = {
@@ -218,11 +297,22 @@ static void __init omap3beagle_flash_init(void)
 
 static void __init omap3_beagle_init(void)
 {
+	omap3_beagle_i2c_init();
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
 	omap_board_config = omap3_beagle_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
 	omap_serial_init();
+
+	omap_cfg_reg(AH8_34XX_GPIO29);
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	omap_cfg_reg(J25_34XX_GPIO170);
+	gpio_request(170, "DVI_nPD");
+	/* REVISIT leave DVI powered down until it's needed ... */
+	gpio_direction_output(170, true);
+
 	omap3beagle_flash_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
new file mode 100644
index 000000000000..b3196107afdb
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -0,0 +1,212 @@
+/*
+ * board-omap3pandora.c (Pandora Handheld Console)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpio.h>
+#include <mach/hardware.h>
+#include <mach/mcspi.h>
+
+#include "mmc-twl4030.h"
+
+#define OMAP3_PANDORA_TS_GPIO		94
+
+static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= 126,
+		.ext_clock	= 0,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= 127,
+		.ext_clock	= 1,
+	},
+	{}	/* Terminator */
+};
+
+static struct omap_uart_config omap3pandora_uart_config __initdata = {
+	.enabled_uarts	= (1 << 2), /* UART3 */
+};
+
+static int omap3pandora_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
+	omap3pandora_mmc[0].gpio_cd = gpio + 0;
+	omap3pandora_mmc[1].gpio_cd = gpio + 1;
+	twl4030_mmc_init(omap3pandora_mmc);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= omap3pandora_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3pandora_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_platform_data omap3pandora_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+	.gpio		= &omap3pandora_gpio_data,
+	.usb		= &omap3pandora_usb_data,
+};
+
+static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tps65950", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &omap3pandora_twldata,
+	},
+};
+
+static int __init omap3pandora_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo,
+			ARRAY_SIZE(omap3pandora_i2c_boardinfo));
+	/* i2c2 pins are not connected */
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static void __init omap3pandora_init_irq(void)
+{
+	omap2_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init omap3pandora_ads7846_init(void)
+{
+	int gpio = OMAP3_PANDORA_TS_GPIO;
+	int ret;
+
+	ret = gpio_request(gpio, "ads7846_pen_down");
+	if (ret < 0) {
+		printk(KERN_ERR "Failed to request GPIO %d for "
+				"ads7846 pen down IRQ\n", gpio);
+		return;
+	}
+
+	gpio_direction_input(gpio);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_PANDORA_TS_GPIO);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO),
+		.platform_data		= &ads7846_config,
+	}
+};
+
+static struct platform_device omap3pandora_lcd_device = {
+	.name		= "pandora_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3pandora_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
+	{ OMAP_TAG_UART,	&omap3pandora_uart_config },
+	{ OMAP_TAG_LCD,		&omap3pandora_lcd_config },
+};
+
+static struct platform_device *omap3pandora_devices[] __initdata = {
+	&omap3pandora_lcd_device,
+};
+
+static void __init omap3pandora_init(void)
+{
+	omap3pandora_i2c_init();
+	platform_add_devices(omap3pandora_devices,
+			ARRAY_SIZE(omap3pandora_devices));
+	omap_board_config = omap3pandora_config;
+	omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
+	omap_serial_init();
+	spi_register_board_info(omap3pandora_spi_board_info,
+			ARRAY_SIZE(omap3pandora_spi_board_info));
+	omap3pandora_ads7846_init();
+}
+
+static void __init omap3pandora_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3pandora_map_io,
+	.init_irq	= omap3pandora_init_irq,
+	.init_machine	= omap3pandora_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index e09aa59a399c..82b3dc557c96 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -26,6 +26,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/i2c/twl4030.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -44,6 +45,8 @@
 #include <mach/hardware.h>
 #include <mach/nand.h>
 
+#include "mmc-twl4030.h"
+
 #define NAND_BLOCK_SIZE SZ_128K
 #define GPMC_CS0_BASE  0x60
 #define GPMC_CS_SIZE   0x30
@@ -139,8 +142,31 @@ static struct omap_uart_config overo_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
+static struct twl4030_gpio_platform_data overo_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_platform_data overo_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+	.gpio		= &overo_gpio_data,
+};
+
+static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &overo_twldata,
+	},
+};
+
 static int __init overo_i2c_init(void)
 {
+	omap_register_i2c_bus(1, 2600, overo_i2c_boardinfo,
+			ARRAY_SIZE(overo_i2c_boardinfo));
 	/* i2c2 pins are used for gpio */
 	omap_register_i2c_bus(3, 400, NULL, 0);
 	return 0;
@@ -171,6 +197,22 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{}	/* Terminator */
+};
+
 static void __init overo_init(void)
 {
 	overo_i2c_init();
@@ -178,6 +220,7 @@ static void __init overo_init(void)
 	omap_board_config = overo_config;
 	omap_board_config_size = ARRAY_SIZE(overo_config);
 	omap_serial_init();
+	twl4030_mmc_init(mmc);
 	overo_flash_init();
 
 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 242a19d86ccd..ff6cd14d254d 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -2522,7 +2522,6 @@ static struct clk usbhs_ick = {
 
 static struct clk mmchs1_ick = {
 	.name		= "mmchs_ick",
-	.id		= 1,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2533,7 +2532,6 @@ static struct clk mmchs1_ick = {
 
 static struct clk mmchs1_fck = {
 	.name		= "mmchs_fck",
-	.id		= 1,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l3_clkdm",
@@ -2544,7 +2542,7 @@ static struct clk mmchs1_fck = {
 
 static struct clk mmchs2_ick = {
 	.name		= "mmchs_ick",
-	.id		= 2,
+	.id		= 1,
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2555,7 +2553,7 @@ static struct clk mmchs2_ick = {
 
 static struct clk mmchs2_fck = {
 	.name		= "mmchs_fck",
-	.id		= 2,
+	.id		= 1,
 	.parent		= &func_96m_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -2595,7 +2593,6 @@ static struct clk mdm_intc_ick = {
 
 static struct clk mmchsdb1_fck = {
 	.name		= "mmchsdb_fck",
-	.id		= 1,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2606,7 +2603,7 @@ static struct clk mmchsdb1_fck = {
 
 static struct clk mmchsdb2_fck = {
 	.name		= "mmchsdb_fck",
-	.id		= 2,
+	.id		= 1,
 	.parent		= &func_32k_ck,
 	.flags		= CLOCK_IN_OMAP243X,
 	.clkdm_name	= "core_l4_clkdm",
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 084e11082f80..31bb7010bd48 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -475,7 +475,7 @@ int __init omap2_clk_init(void)
 		 * Update this if there are further clock changes between ES2
 		 * and production parts
 		 */
-		if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0)) {
+		if (omap_rev() == OMAP3430_REV_ES1_0) {
 			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
 			cpu_clkflg |= CLOCK_IN_OMAP3430ES1;
 		} else {
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index c38a8a09692f..a826094d89b5 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1374,7 +1374,7 @@ static struct clk core_96m_fck = {
 
 static struct clk mmchs3_fck = {
 	.name		= "mmchs_fck",
-	.id		= 3,
+	.id		= 2,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
@@ -1385,7 +1385,7 @@ static struct clk mmchs3_fck = {
 
 static struct clk mmchs2_fck = {
 	.name		= "mmchs_fck",
-	.id		= 2,
+	.id		= 1,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
@@ -1406,7 +1406,6 @@ static struct clk mspro_fck = {
 
 static struct clk mmchs1_fck = {
 	.name		= "mmchs_fck",
-	.id		= 1,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
@@ -1722,7 +1721,7 @@ static struct clk usbtll_ick = {
 
 static struct clk mmchs3_ick = {
 	.name		= "mmchs_ick",
-	.id		= 3,
+	.id		= 2,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
@@ -1774,7 +1773,7 @@ static struct clk des2_ick = {
 
 static struct clk mmchs2_ick = {
 	.name		= "mmchs_ick",
-	.id		= 2,
+	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
@@ -1785,7 +1784,6 @@ static struct clk mmchs2_ick = {
 
 static struct clk mmchs1_ick = {
 	.name		= "mmchs_ick",
-	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
@@ -2280,8 +2278,8 @@ static struct clk wkup_32k_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk gpio1_fck = {
-	.name		= "gpio1_fck",
+static struct clk gpio1_dbck = {
+	.name		= "gpio1_dbck",
 	.parent		= &wkup_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
@@ -2527,8 +2525,8 @@ static struct clk per_32k_alwon_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk gpio6_fck = {
-	.name		= "gpio6_fck",
+static struct clk gpio6_dbck = {
+	.name		= "gpio6_dbck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
@@ -2537,8 +2535,8 @@ static struct clk gpio6_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk gpio5_fck = {
-	.name		= "gpio5_fck",
+static struct clk gpio5_dbck = {
+	.name		= "gpio5_dbck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
@@ -2547,8 +2545,8 @@ static struct clk gpio5_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk gpio4_fck = {
-	.name		= "gpio4_fck",
+static struct clk gpio4_dbck = {
+	.name		= "gpio4_dbck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
@@ -2557,8 +2555,8 @@ static struct clk gpio4_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk gpio3_fck = {
-	.name		= "gpio3_fck",
+static struct clk gpio3_dbck = {
+	.name		= "gpio3_dbck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
@@ -2567,8 +2565,8 @@ static struct clk gpio3_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk gpio2_fck = {
-	.name		= "gpio2_fck",
+static struct clk gpio2_dbck = {
+	.name		= "gpio2_dbck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
@@ -3170,7 +3168,7 @@ static struct clk *onchip_34xx_clks[] __initdata = {
 	&usim_fck,
 	&gpt1_fck,
 	&wkup_32k_fck,
-	&gpio1_fck,
+	&gpio1_dbck,
 	&wdt2_fck,
 	&wkup_l4_ick,
 	&usim_ick,
@@ -3192,11 +3190,11 @@ static struct clk *onchip_34xx_clks[] __initdata = {
 	&gpt8_fck,
 	&gpt9_fck,
 	&per_32k_alwon_fck,
-	&gpio6_fck,
-	&gpio5_fck,
-	&gpio4_fck,
-	&gpio3_fck,
-	&gpio2_fck,
+	&gpio6_dbck,
+	&gpio5_dbck,
+	&gpio4_dbck,
+	&gpio3_dbck,
+	&gpio2_dbck,
 	&wdt3_fck,
 	&per_l4_ick,
 	&gpio6_ick,
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 90af2ac469aa..9d7216ff6c9f 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -14,16 +14,19 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
+#include <mach/control.h>
 #include <mach/tc.h>
 #include <mach/board.h>
 #include <mach/mux.h>
 #include <mach/gpio.h>
 #include <mach/eac.h>
+#include <mach/mmc.h>
 
 #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 #define OMAP2_MBOX_BASE		IO_ADDRESS(OMAP24XX_MAILBOX_BASE)
@@ -295,6 +298,171 @@ static void omap_init_sha1_md5(void)
 static inline void omap_init_sha1_md5(void) { }
 #endif
 
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP3
+
+#define MMCHS_SYSCONFIG			0x0010
+#define MMCHS_SYSCONFIG_SWRESET		(1 << 1)
+#define MMCHS_SYSSTATUS			0x0014
+#define MMCHS_SYSSTATUS_RESETDONE	(1 << 0)
+
+static struct platform_device dummy_pdev = {
+	.dev = {
+		.bus = &platform_bus_type,
+	},
+};
+
+/**
+ * omap_hsmmc_reset() - Full reset of each HS-MMC controller
+ *
+ * Ensure that each MMC controller is fully reset.  Controllers
+ * left in an unknown state (by bootloader) may prevent retention
+ * or OFF-mode.  This is especially important in cases where the
+ * MMC driver is not enabled, _or_ built as a module.
+ *
+ * In order for reset to work, interface, functional and debounce
+ * clocks must be enabled.  The debounce clock comes from func_32k_clk
+ * and is not under SW control, so we only enable i- and f-clocks.
+ **/
+static void __init omap_hsmmc_reset(void)
+{
+	u32 i, nr_controllers = cpu_is_omap34xx() ? OMAP34XX_NR_MMC :
+		OMAP24XX_NR_MMC;
+
+	for (i = 0; i < nr_controllers; i++) {
+		u32 v, base = 0;
+		struct clk *iclk, *fclk;
+		struct device *dev = &dummy_pdev.dev;
+
+		switch (i) {
+		case 0:
+			base = OMAP2_MMC1_BASE;
+			break;
+		case 1:
+			base = OMAP2_MMC2_BASE;
+			break;
+		case 2:
+			base = OMAP3_MMC3_BASE;
+			break;
+		}
+
+		dummy_pdev.id = i;
+		iclk = clk_get(dev, "mmchs_ick");
+		if (iclk && clk_enable(iclk))
+			iclk = NULL;
+
+		fclk = clk_get(dev, "mmchs_fck");
+		if (fclk && clk_enable(fclk))
+			fclk = NULL;
+
+		if (!iclk || !fclk) {
+			printk(KERN_WARNING
+			       "%s: Unable to enable clocks for MMC%d, "
+			       "cannot reset.\n",  __func__, i);
+			break;
+		}
+
+		omap_writel(MMCHS_SYSCONFIG_SWRESET, base + MMCHS_SYSCONFIG);
+		v = omap_readl(base + MMCHS_SYSSTATUS);
+		while (!(omap_readl(base + MMCHS_SYSSTATUS) &
+			 MMCHS_SYSSTATUS_RESETDONE))
+			cpu_relax();
+
+		if (fclk) {
+			clk_disable(fclk);
+			clk_put(fclk);
+		}
+		if (iclk) {
+			clk_disable(iclk);
+			clk_put(iclk);
+		}
+	}
+}
+#else
+static inline void omap_hsmmc_reset(void) {}
+#endif
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+
+static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
+			int controller_nr)
+{
+	if (cpu_is_omap2420() && controller_nr == 0) {
+		omap_cfg_reg(H18_24XX_MMC_CMD);
+		omap_cfg_reg(H15_24XX_MMC_CLKI);
+		omap_cfg_reg(G19_24XX_MMC_CLKO);
+		omap_cfg_reg(F20_24XX_MMC_DAT0);
+		omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
+		omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
+		if (mmc_controller->slots[0].wires == 4) {
+			omap_cfg_reg(H14_24XX_MMC_DAT1);
+			omap_cfg_reg(E19_24XX_MMC_DAT2);
+			omap_cfg_reg(D19_24XX_MMC_DAT3);
+			omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
+			omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
+			omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
+		}
+
+		/*
+		 * Use internal loop-back in MMC/SDIO Module Input Clock
+		 * selection
+		 */
+		if (mmc_controller->slots[0].internal_clock) {
+			u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+			v |= (1 << 24);
+			omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+		}
+	}
+}
+
+void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
+			int nr_controllers)
+{
+	int i;
+
+	for (i = 0; i < nr_controllers; i++) {
+		unsigned long base, size;
+		unsigned int irq = 0;
+
+		if (!mmc_data[i])
+			continue;
+
+		omap2_mmc_mux(mmc_data[i], i);
+
+		switch (i) {
+		case 0:
+			base = OMAP2_MMC1_BASE;
+			irq = INT_24XX_MMC_IRQ;
+			break;
+		case 1:
+			base = OMAP2_MMC2_BASE;
+			irq = INT_24XX_MMC2_IRQ;
+			break;
+		case 2:
+			if (!cpu_is_omap34xx())
+				return;
+			base = OMAP3_MMC3_BASE;
+			irq = INT_34XX_MMC3_IRQ;
+			break;
+		default:
+			continue;
+		}
+
+		if (cpu_is_omap2420())
+			size = OMAP2420_MMC_SIZE;
+		else
+			size = HSMMC_SIZE;
+
+		omap_mmc_add(i, base, size, irq, mmc_data[i]);
+	};
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 #if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
 #define OMAP_HDQ_BASE	0x480B2000
@@ -334,6 +502,7 @@ static int __init omap2_init_devices(void)
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
+	omap_hsmmc_reset();
 	omap_init_mbox();
 	omap_init_mcspi();
 	omap_hdq_init();
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index bf45ff39a7b5..b0f8e7d62798 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -22,40 +22,15 @@
 #include <mach/control.h>
 #include <mach/cpu.h>
 
-static u32 class;
-static void __iomem *tap_base;
-static u16 tap_prod_id;
-
-#define OMAP_TAP_IDCODE		0x0204
-#define OMAP_TAP_DIE_ID_0	0x0218
-#define OMAP_TAP_DIE_ID_1	0x021C
-#define OMAP_TAP_DIE_ID_2	0x0220
-#define OMAP_TAP_DIE_ID_3	0x0224
-
-/* system_rev fields for OMAP2 processors:
- *   CPU id bits     [31:16],
- *   CPU device type [15:12], (unprg,normal,POP)
- *   CPU revision    [11:08]
- *   CPU class bits  [07:00]
- */
-
-struct omap_id {
-	u16	hawkeye;	/* Silicon type (Hawkeye id) */
-	u8	dev;		/* Device type from production_id reg */
-	u32	type;		/* combined type id copied to system_rev */
-};
+static struct omap_chip_id omap_chip;
+static unsigned int omap_revision;
 
-/* Register values to detect the OMAP version */
-static struct omap_id omap_ids[] __initdata = {
-	{ .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200000 },
-	{ .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201000 },
-	{ .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202000 },
-	{ .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220000 },
-	{ .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230000 },
-	{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 },
-};
 
-static struct omap_chip_id omap_chip;
+unsigned int omap_rev(void)
+{
+	return omap_revision;
+}
+EXPORT_SYMBOL(omap_rev);
 
 /**
  * omap_chip_is - test whether currently running OMAP matches a chip type
@@ -70,135 +45,41 @@ int omap_chip_is(struct omap_chip_id oci)
 }
 EXPORT_SYMBOL(omap_chip_is);
 
-static u32 __init read_tap_reg(int reg)
-{
-	unsigned int regval = 0;
-	u32 cpuid;
-
-	/* Reading the IDCODE register on 3430 ES1 results in a
-	 * data abort as the register is not exposed on the OCP
-	 * Hence reading the Cortex Rev
-	 */
-	cpuid = read_cpuid(CPUID_ID);
-
-	/* If the processor type is Cortex-A8 and the revision is 0x0
-	 * it means its Cortex r0p0 which is 3430 ES1
-	 */
-	if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) {
-
-		if (reg == tap_prod_id) {
-			regval = 0x000F00F0;
-			goto out;
-		}
-
-		switch (reg) {
-		case OMAP_TAP_IDCODE  : regval = 0x0B7AE02F; break;
-		/* Making DevType as 0xF in ES1 to differ from ES2 */
-		case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break;
-		case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break;
-		case OMAP_TAP_DIE_ID_2:	regval = 0x00000000; break;
-		case OMAP_TAP_DIE_ID_3:	regval = 0x2d2c0000; break;
-		}
-	} else
-		regval = __raw_readl(tap_base + reg);
-
-out:
-	return regval;
-
-}
+/*----------------------------------------------------------------------------*/
 
-/*
- * _set_system_rev - set the system_rev global based on current OMAP chip type
- *
- * Set the system_rev global.  This is primarily used by the cpu_is_omapxxxx()
- * macros.
- */
-static void __init _set_system_rev(u32 type, u8 rev)
-{
-	u32 i, ctrl_status;
-
-	/*
-	 * system_rev encoding is as follows
-	 * system_rev & 0xff000000 -> Omap Class (24xx/34xx)
-	 * system_rev & 0xfff00000 -> Omap Sub Class (242x/343x)
-	 * system_rev & 0xffff0000 -> Omap type (2420/2422/2423/2430/3430)
-	 * system_rev & 0x0000f000 -> Silicon revision (ES1, ES2 )
-	 * system_rev & 0x00000700 -> Device Type ( EMU/HS/GP/BAD )
-	 * system_rev & 0x000000c0 -> IDCODE revision[6:7]
-	 * system_rev & 0x0000003f -> sys_boot[0:5]
-	 */
-	/* Embedding the ES revision info in type field */
-	system_rev = type;
-	/* Also add IDCODE revision info only two lower bits */
-	system_rev |= ((rev & 0x3) << 6);
-
-	/* Add in the device type and sys_boot fields (see above) */
-	if (cpu_is_omap24xx()) {
-		i = OMAP24XX_CONTROL_STATUS;
-	} else if (cpu_is_omap343x()) {
-		i = OMAP343X_CONTROL_STATUS;
-	} else {
-		printk(KERN_ERR "id: unknown CPU type\n");
-		BUG();
-	}
-	ctrl_status = omap_ctrl_readl(i);
-	system_rev |= (ctrl_status & (OMAP2_SYSBOOT_5_MASK |
-				      OMAP2_SYSBOOT_4_MASK |
-				      OMAP2_SYSBOOT_3_MASK |
-				      OMAP2_SYSBOOT_2_MASK |
-				      OMAP2_SYSBOOT_1_MASK |
-				      OMAP2_SYSBOOT_0_MASK));
-	system_rev |= (ctrl_status & OMAP2_DEVICETYPE_MASK);
-}
-
-
-/*
- * _set_omap_chip - set the omap_chip global based on OMAP chip type
- *
- * Build the omap_chip bits.  This variable is used by powerdomain and
- * clockdomain code to indicate whether structures are applicable for
- * the current OMAP chip type by ANDing it against a 'platform' bitfield
- * in the structure.
- */
-static void __init _set_omap_chip(void)
-{
-	if (cpu_is_omap343x()) {
-
-		omap_chip.oc = CHIP_IS_OMAP3430;
-		if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0))
-			omap_chip.oc |= CHIP_IS_OMAP3430ES1;
-		else if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0))
-			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
-
-	} else if (cpu_is_omap243x()) {
-
-		/* Currently only supports 2430ES2.1 and 2430-all */
-		omap_chip.oc |= CHIP_IS_OMAP2430;
-
-	} else if (cpu_is_omap242x()) {
-
-		/* Currently only supports 2420ES2.1.1 and 2420-all */
-		omap_chip.oc |= CHIP_IS_OMAP2420;
+#define OMAP_TAP_IDCODE		0x0204
+#define OMAP_TAP_DIE_ID_0	0x0218
+#define OMAP_TAP_DIE_ID_1	0x021C
+#define OMAP_TAP_DIE_ID_2	0x0220
+#define OMAP_TAP_DIE_ID_3	0x0224
 
-	} else {
+#define read_tap_reg(reg)	__raw_readl(tap_base  + (reg))
 
-		/* Current CPU not supported by this code. */
-		printk(KERN_WARNING "OMAP chip type code does not yet support "
-		       "this CPU type.\n");
-		WARN_ON(1);
+struct omap_id {
+	u16	hawkeye;	/* Silicon type (Hawkeye id) */
+	u8	dev;		/* Device type from production_id reg */
+	u32	type;		/* Combined type id copied to omap_revision */
+};
 
-	}
+/* Register values to detect the OMAP version */
+static struct omap_id omap_ids[] __initdata = {
+	{ .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200024 },
+	{ .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201024 },
+	{ .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202024 },
+	{ .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220024 },
+	{ .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230024 },
+	{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300024 },
+};
 
-}
+static void __iomem *tap_base;
+static u16 tap_prod_id;
 
-void __init omap2_check_revision(void)
+void __init omap24xx_check_revision(void)
 {
 	int i, j;
-	u32 idcode;
-	u32 prod_id;
+	u32 idcode, prod_id;
 	u16 hawkeye;
-	u8  dev_type;
-	u8  rev;
+	u8  dev_type, rev;
 
 	idcode = read_tap_reg(OMAP_TAP_IDCODE);
 	prod_id = read_tap_reg(tap_prod_id);
@@ -220,18 +101,6 @@ void __init omap2_check_revision(void)
 	pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
 		 prod_id, dev_type);
 
-	/*
-	 * Detection for 34xx ES2.0 and above can be done with just
-	 * hawkeye and rev. See TRM 1.5.2 Device Identification.
-	 * Note that rev cannot be used directly as ES1.0 uses value 0.
-	 */
-	if (hawkeye == 0xb7ae) {
-		system_rev = 0x34300000 | ((1 + rev) << 12);
-		pr_info("OMAP%04x ES2.%i\n", system_rev >> 16, rev);
-		_set_omap_chip();
-		return;
-	}
-
 	/* Check hawkeye ids */
 	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
 		if (hawkeye == omap_ids[i].hawkeye)
@@ -255,23 +124,115 @@ void __init omap2_check_revision(void)
 		j = i;
 	}
 
-	_set_system_rev(omap_ids[j].type, rev);
+	pr_info("OMAP%04x", omap_rev() >> 16);
+	if ((omap_rev() >> 8) & 0x0f)
+		pr_info("ES%x", (omap_rev() >> 12) & 0xf);
+	pr_info("\n");
+}
 
-	_set_omap_chip();
+void __init omap34xx_check_revision(void)
+{
+	u32 cpuid, idcode;
+	u16 hawkeye;
+	u8 rev;
+	char *rev_name = "ES1.0";
 
-	pr_info("OMAP%04x", system_rev >> 16);
-	if ((system_rev >> 8) & 0x0f)
-		pr_info("ES%x", (system_rev >> 12) & 0xf);
-	pr_info("\n");
+	/*
+	 * We cannot access revision registers on ES1.0.
+	 * If the processor type is Cortex-A8 and the revision is 0x0
+	 * it means its Cortex r0p0 which is 3430 ES1.0.
+	 */
+	cpuid = read_cpuid(CPUID_ID);
+	if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
+		omap_revision = OMAP3430_REV_ES1_0;
+		goto out;
+	}
 
+	/*
+	 * Detection for 34xx ES2.0 and above can be done with just
+	 * hawkeye and rev. See TRM 1.5.2 Device Identification.
+	 * Note that rev does not map directly to our defined processor
+	 * revision numbers as ES1.0 uses value 0.
+	 */
+	idcode = read_tap_reg(OMAP_TAP_IDCODE);
+	hawkeye = (idcode >> 12) & 0xffff;
+	rev = (idcode >> 28) & 0xff;
+
+	if (hawkeye == 0xb7ae) {
+		switch (rev) {
+		case 0:
+			omap_revision = OMAP3430_REV_ES2_0;
+			rev_name = "ES2.0";
+			break;
+		case 2:
+			omap_revision = OMAP3430_REV_ES2_1;
+			rev_name = "ES2.1";
+			break;
+		case 3:
+			omap_revision = OMAP3430_REV_ES3_0;
+			rev_name = "ES3.0";
+			break;
+		default:
+			/* Use the latest known revision as default */
+			omap_revision = OMAP3430_REV_ES3_0;
+			rev_name = "Unknown revision\n";
+		}
+	}
+
+out:
+	pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
 }
 
+/*
+ * Try to detect the exact revision of the omap we're running on
+ */
+void __init omap2_check_revision(void)
+{
+	/*
+	 * At this point we have an idea about the processor revision set
+	 * earlier with omap2_set_globals_tap().
+	 */
+	if (cpu_is_omap24xx())
+		omap24xx_check_revision();
+	else if (cpu_is_omap34xx())
+		omap34xx_check_revision();
+	else
+		pr_err("OMAP revision unknown, please fix!\n");
+
+	/*
+	 * OK, now we know the exact revision. Initialize omap_chip bits
+	 * for powerdowmain and clockdomain code.
+	 */
+	if (cpu_is_omap243x()) {
+		/* Currently only supports 2430ES2.1 and 2430-all */
+		omap_chip.oc |= CHIP_IS_OMAP2430;
+	} else if (cpu_is_omap242x()) {
+		/* Currently only supports 2420ES2.1.1 and 2420-all */
+		omap_chip.oc |= CHIP_IS_OMAP2420;
+	} else if (cpu_is_omap343x()) {
+		omap_chip.oc = CHIP_IS_OMAP3430;
+		if (omap_rev() == OMAP3430_REV_ES1_0)
+			omap_chip.oc |= CHIP_IS_OMAP3430ES1;
+		else if (omap_rev() > OMAP3430_REV_ES1_0)
+			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+	} else {
+		pr_err("Uninitialized omap_chip, please fix!\n");
+	}
+}
+
+/*
+ * Set up things for map_io and processor detection later on. Gets called
+ * pretty much first thing from board init. For multi-omap, this gets
+ * cpu_is_omapxxxx() working accurately enough for map_io. Then we'll try to
+ * detect the exact revision later on in omap2_detect_revision() once map_io
+ * is done.
+ */
 void __init omap2_set_globals_tap(struct omap_globals *omap2_globals)
 {
-	class = omap2_globals->class;
+	omap_revision = omap2_globals->class;
 	tap_base = omap2_globals->tap;
 
-	if (class == 0x3430)
+	if (cpu_is_omap34xx())
 		tap_prod_id = 0x0210;
 	else
 		tap_prod_id = 0x0208;
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index c40fc378a251..636e2821af7d 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -23,6 +23,7 @@
 #define INTC_REVISION		0x0000
 #define INTC_SYSCONFIG		0x0010
 #define INTC_SYSSTATUS		0x0014
+#define INTC_SIR		0x0040
 #define INTC_CONTROL		0x0048
 #define INTC_MIR_CLEAR0		0x0088
 #define INTC_MIR_SET0		0x008c
@@ -60,6 +61,30 @@ static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
 	return __raw_readl(bank->base_reg + reg);
 }
 
+static int previous_irq;
+
+/*
+ * On 34xx we can get occasional spurious interrupts if the ack from
+ * an interrupt handler does not get posted before we unmask. Warn about
+ * the interrupt handlers that need to flush posted writes.
+ */
+static int omap_check_spurious(unsigned int irq)
+{
+	u32 sir, spurious;
+
+	sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR);
+	spurious = sir >> 6;
+
+	if (spurious > 1) {
+		printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush "
+					"posted write for irq %i\n",
+					irq, sir, previous_irq);
+		return spurious;
+	}
+
+	return 0;
+}
+
 /* XXX: FIQ and additional INTC support (only MPU at the moment) */
 static void omap_ack_irq(unsigned int irq)
 {
@@ -70,6 +95,20 @@ static void omap_mask_irq(unsigned int irq)
 {
 	int offset = irq & (~(IRQ_BITS_PER_REG - 1));
 
+	if (cpu_is_omap34xx()) {
+		int spurious = 0;
+
+		/*
+		 * INT_34XX_GPT12_IRQ is also the spurious irq. Maybe because
+		 * it is the highest irq number?
+		 */
+		if (irq == INT_34XX_GPT12_IRQ)
+			spurious = omap_check_spurious(irq);
+
+		if (!spurious)
+			previous_irq = irq;
+	}
+
 	irq &= (IRQ_BITS_PER_REG - 1);
 
 	intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset);
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
new file mode 100644
index 000000000000..437f52073f6e
--- /dev/null
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -0,0 +1,408 @@
+/*
+ * linux/arch/arm/mach-omap2/mmc-twl4030.c
+ *
+ * Copyright (C) 2007-2008 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <mach/control.h>
+#include <mach/mmc.h>
+#include <mach/board.h>
+
+#include "mmc-twl4030.h"
+
+#if defined(CONFIG_TWL4030_CORE) && \
+	(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
+
+#define LDO_CLR			0x00
+#define VSEL_S2_CLR		0x40
+
+#define VMMC1_DEV_GRP		0x27
+#define VMMC1_CLR		0x00
+#define VMMC1_315V		0x03
+#define VMMC1_300V		0x02
+#define VMMC1_285V		0x01
+#define VMMC1_185V		0x00
+#define VMMC1_DEDICATED		0x2A
+
+#define VMMC2_DEV_GRP		0x2B
+#define VMMC2_CLR		0x40
+#define VMMC2_315V		0x0c
+#define VMMC2_300V		0x0b
+#define VMMC2_285V		0x0a
+#define VMMC2_260V		0x08
+#define VMMC2_185V		0x06
+#define VMMC2_DEDICATED		0x2E
+
+#define VMMC_DEV_GRP_P1		0x20
+
+static u16 control_pbias_offset;
+static u16 control_devconf1_offset;
+
+#define HSMMC_NAME_LEN	9
+
+static struct twl_mmc_controller {
+	struct omap_mmc_platform_data	*mmc;
+	u8		twl_vmmc_dev_grp;
+	u8		twl_mmc_dedicated;
+	char		name[HSMMC_NAME_LEN];
+} hsmmc[] = {
+	{
+		.twl_vmmc_dev_grp		= VMMC1_DEV_GRP,
+		.twl_mmc_dedicated		= VMMC1_DEDICATED,
+	},
+	{
+		.twl_vmmc_dev_grp		= VMMC2_DEV_GRP,
+		.twl_mmc_dedicated		= VMMC2_DEDICATED,
+	},
+};
+
+static int twl_mmc_card_detect(int irq)
+{
+	unsigned i;
+
+	for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
+		struct omap_mmc_platform_data *mmc;
+
+		mmc = hsmmc[i].mmc;
+		if (!mmc)
+			continue;
+		if (irq != mmc->slots[0].card_detect_irq)
+			continue;
+
+		/* NOTE: assumes card detect signal is active-low */
+		return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+	}
+	return -ENOSYS;
+}
+
+static int twl_mmc_get_ro(struct device *dev, int slot)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	/* NOTE: assumes write protect signal is active-high */
+	return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
+}
+
+/*
+ * MMC Slot Initialization.
+ */
+static int twl_mmc_late_init(struct device *dev)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	int ret = 0;
+	int i;
+
+	ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
+	if (ret)
+		goto done;
+	ret = gpio_direction_input(mmc->slots[0].switch_pin);
+	if (ret)
+		goto err;
+
+	for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
+		if (hsmmc[i].name == mmc->slots[0].name) {
+			hsmmc[i].mmc = mmc;
+			break;
+		}
+	}
+
+	return 0;
+
+err:
+	gpio_free(mmc->slots[0].switch_pin);
+done:
+	mmc->slots[0].card_detect_irq = 0;
+	mmc->slots[0].card_detect = NULL;
+
+	dev_err(dev, "err %d configuring card detect\n", ret);
+	return ret;
+}
+
+static void twl_mmc_cleanup(struct device *dev)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	gpio_free(mmc->slots[0].switch_pin);
+}
+
+#ifdef CONFIG_PM
+
+static int twl_mmc_suspend(struct device *dev, int slot)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	disable_irq(mmc->slots[0].card_detect_irq);
+	return 0;
+}
+
+static int twl_mmc_resume(struct device *dev, int slot)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	enable_irq(mmc->slots[0].card_detect_irq);
+	return 0;
+}
+
+#else
+#define twl_mmc_suspend	NULL
+#define twl_mmc_resume	NULL
+#endif
+
+/*
+ * Sets the MMC voltage in twl4030
+ */
+static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
+{
+	int ret;
+	u8 vmmc, dev_grp_val;
+
+	switch (1 << vdd) {
+	case MMC_VDD_35_36:
+	case MMC_VDD_34_35:
+	case MMC_VDD_33_34:
+	case MMC_VDD_32_33:
+	case MMC_VDD_31_32:
+	case MMC_VDD_30_31:
+		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+			vmmc = VMMC1_315V;
+		else
+			vmmc = VMMC2_315V;
+		break;
+	case MMC_VDD_29_30:
+		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+			vmmc = VMMC1_315V;
+		else
+			vmmc = VMMC2_300V;
+		break;
+	case MMC_VDD_27_28:
+	case MMC_VDD_26_27:
+		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+			vmmc = VMMC1_285V;
+		else
+			vmmc = VMMC2_285V;
+		break;
+	case MMC_VDD_25_26:
+	case MMC_VDD_24_25:
+	case MMC_VDD_23_24:
+	case MMC_VDD_22_23:
+	case MMC_VDD_21_22:
+	case MMC_VDD_20_21:
+		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+			vmmc = VMMC1_285V;
+		else
+			vmmc = VMMC2_260V;
+		break;
+	case MMC_VDD_165_195:
+		if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+			vmmc = VMMC1_185V;
+		else
+			vmmc = VMMC2_185V;
+		break;
+	default:
+		vmmc = 0;
+		break;
+	}
+
+	if (vmmc)
+		dev_grp_val = VMMC_DEV_GRP_P1;	/* Power up */
+	else
+		dev_grp_val = LDO_CLR;		/* Power down */
+
+	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+					dev_grp_val, c->twl_vmmc_dev_grp);
+	if (ret)
+		return ret;
+
+	ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+					vmmc, c->twl_mmc_dedicated);
+
+	return ret;
+}
+
+static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+	u32 reg;
+	int ret = 0;
+	struct twl_mmc_controller *c = &hsmmc[0];
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	if (power_on) {
+		if (cpu_is_omap2430()) {
+			reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
+			if ((1 << vdd) >= MMC_VDD_30_31)
+				reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
+			else
+				reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
+			omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
+		}
+
+		if (mmc->slots[0].internal_clock) {
+			reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+			reg |= OMAP2_MMCSDIO1ADPCLKISEL;
+			omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
+		}
+
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= OMAP2_PBIASSPEEDCTRL0;
+		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+
+		ret = twl_mmc_set_voltage(c, vdd);
+
+		/* 100ms delay required for PBIAS configuration */
+		msleep(100);
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
+		if ((1 << vdd) <= MMC_VDD_165_195)
+			reg &= ~OMAP2_PBIASLITEVMODE0;
+		else
+			reg |= OMAP2_PBIASLITEVMODE0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+	} else {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+
+		ret = twl_mmc_set_voltage(c, 0);
+
+		/* 100ms delay required for PBIAS configuration */
+		msleep(100);
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
+			OMAP2_PBIASLITEVMODE0);
+		omap_ctrl_writel(reg, control_pbias_offset);
+	}
+
+	return ret;
+}
+
+static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
+{
+	int ret;
+	struct twl_mmc_controller *c = &hsmmc[1];
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	if (power_on) {
+		if (mmc->slots[0].internal_clock) {
+			u32 reg;
+
+			reg = omap_ctrl_readl(control_devconf1_offset);
+			reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+			omap_ctrl_writel(reg, control_devconf1_offset);
+		}
+		ret = twl_mmc_set_voltage(c, vdd);
+	} else {
+		ret = twl_mmc_set_voltage(c, 0);
+	}
+
+	return ret;
+}
+
+static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
+
+void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
+{
+	struct twl4030_hsmmc_info *c;
+	int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
+
+	if (cpu_is_omap2430()) {
+		control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
+		control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
+		nr_hsmmc = 2;
+	} else {
+		control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
+		control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
+	}
+
+	for (c = controllers; c->mmc; c++) {
+		struct twl_mmc_controller *twl = hsmmc + c->mmc - 1;
+		struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
+
+		if (!c->mmc || c->mmc > nr_hsmmc) {
+			pr_debug("MMC%d: no such controller\n", c->mmc);
+			continue;
+		}
+		if (mmc) {
+			pr_debug("MMC%d: already configured\n", c->mmc);
+			continue;
+		}
+
+		mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
+		if (!mmc) {
+			pr_err("Cannot allocate memory for mmc device!\n");
+			return;
+		}
+
+		sprintf(twl->name, "mmc%islot%i", c->mmc, 1);
+		mmc->slots[0].name = twl->name;
+		mmc->nr_slots = 1;
+		mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
+					MMC_VDD_26_27 | MMC_VDD_27_28 |
+					MMC_VDD_29_30 |
+					MMC_VDD_30_31 | MMC_VDD_31_32;
+		mmc->slots[0].wires = c->wires;
+		mmc->slots[0].internal_clock = !c->ext_clock;
+		mmc->dma_mask = 0xffffffff;
+
+		/* note: twl4030 card detect GPIOs normally switch VMMCx ... */
+		if (gpio_is_valid(c->gpio_cd)) {
+			mmc->init = twl_mmc_late_init;
+			mmc->cleanup = twl_mmc_cleanup;
+			mmc->suspend = twl_mmc_suspend;
+			mmc->resume = twl_mmc_resume;
+
+			mmc->slots[0].switch_pin = c->gpio_cd;
+			mmc->slots[0].card_detect_irq = gpio_to_irq(c->gpio_cd);
+			mmc->slots[0].card_detect = twl_mmc_card_detect;
+		} else
+			mmc->slots[0].switch_pin = -EINVAL;
+
+		/* write protect normally uses an OMAP gpio */
+		if (gpio_is_valid(c->gpio_wp)) {
+			gpio_request(c->gpio_wp, "mmc_wp");
+			gpio_direction_input(c->gpio_wp);
+
+			mmc->slots[0].gpio_wp = c->gpio_wp;
+			mmc->slots[0].get_ro = twl_mmc_get_ro;
+		} else
+			mmc->slots[0].gpio_wp = -EINVAL;
+
+		/* NOTE:  we assume OMAP's MMC1 and MMC2 use
+		 * the TWL4030's VMMC1 and VMMC2, respectively;
+		 * and that OMAP's MMC3 isn't used.
+		 */
+
+		switch (c->mmc) {
+		case 1:
+			mmc->slots[0].set_power = twl_mmc1_set_power;
+			break;
+		case 2:
+			mmc->slots[0].set_power = twl_mmc2_set_power;
+			break;
+		default:
+			pr_err("MMC%d configuration not supported!\n", c->mmc);
+			continue;
+		}
+		hsmmc_data[c->mmc - 1] = mmc;
+	}
+
+	omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
new file mode 100644
index 000000000000..e1c8076400ca
--- /dev/null
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -0,0 +1,29 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct twl4030_hsmmc_info {
+	u8	mmc;		/* controller 1/2/3 */
+	u8	wires;		/* 1/4/8 wires */
+	int	gpio_cd;	/* or -EINVAL */
+	int	gpio_wp;	/* or -EINVAL */
+	int	ext_clock:1;	/* use external pin for input clock */
+};
+
+#if	defined(CONFIG_TWL4030_CORE) && \
+	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+	 defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
+
+void twl4030_mmc_init(struct twl4030_hsmmc_info *);
+
+#else
+
+static inline void twl4030_mmc_init(struct twl4030_hsmmc_info *info)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index b1393673d95d..dacb41f130c0 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -203,6 +203,15 @@ MUX_CFG_24XX("AE9_2430_USB0HS_NXT",	0x13D,	0,	0,	0,	1)
 MUX_CFG_24XX("AC7_2430_USB0HS_DATA7",	0x13E,	0,	0,	0,	1)
 
 /* 2430 McBSP */
+MUX_CFG_24XX("AD6_2430_MCBSP_CLKS",	0x011E,	0,	0,	0,	1)
+
+MUX_CFG_24XX("AB2_2430_MCBSP1_CLKR",	0x011A,	0,	0,	0,	1)
+MUX_CFG_24XX("AD5_2430_MCBSP1_FSR",	0x011B,	0,	0,	0,	1)
+MUX_CFG_24XX("AA1_2430_MCBSP1_DX",	0x011C,	0,	0,	0,	1)
+MUX_CFG_24XX("AF3_2430_MCBSP1_DR",	0x011D,	0,	0,	0,	1)
+MUX_CFG_24XX("AB3_2430_MCBSP1_FSX",	0x011F,	0,	0,	0,	1)
+MUX_CFG_24XX("Y9_2430_MCBSP1_CLKX",	0x0120,	0,	0,	0,	1)
+
 MUX_CFG_24XX("AC10_2430_MCBSP2_FSX",	0x012E,	1,	0,	0,	1)
 MUX_CFG_24XX("AD16_2430_MCBSP2_CLX",	0x012F,	1,	0,	0,	1)
 MUX_CFG_24XX("AE13_2430_MCBSP2_DX",	0x0130,	1,	0,	0,	1)
@@ -211,6 +220,31 @@ MUX_CFG_24XX("AC10_2430_MCBSP2_FSX_OFF",0x012E,	0,	0,	0,	1)
 MUX_CFG_24XX("AD16_2430_MCBSP2_CLX_OFF",0x012F,	0,	0,	0,	1)
 MUX_CFG_24XX("AE13_2430_MCBSP2_DX_OFF",	0x0130,	0,	0,	0,	1)
 MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF",	0x0131,	0,	0,	0,	1)
+
+MUX_CFG_24XX("AC9_2430_MCBSP3_CLKX",	0x0103,	0,	0,	0,	1)
+MUX_CFG_24XX("AE4_2430_MCBSP3_FSX",	0x0104,	0,	0,	0,	1)
+MUX_CFG_24XX("AE2_2430_MCBSP3_DR",	0x0105,	0,	0,	0,	1)
+MUX_CFG_24XX("AF4_2430_MCBSP3_DX",	0x0106,	0,	0,	0,	1)
+
+MUX_CFG_24XX("N3_2430_MCBSP4_CLKX",	0x010B,	1,	0,	0,	1)
+MUX_CFG_24XX("AD23_2430_MCBSP4_DR",	0x010C,	1,	0,	0,	1)
+MUX_CFG_24XX("AB25_2430_MCBSP4_DX",	0x010D,	1,	0,	0,	1)
+MUX_CFG_24XX("AC25_2430_MCBSP4_FSX",	0x010E,	1,	0,	0,	1)
+
+MUX_CFG_24XX("AE16_2430_MCBSP5_CLKX",	0x00ED,	1,	0,	0,	1)
+MUX_CFG_24XX("AF12_2430_MCBSP5_FSX",	0x00ED,	1,	0,	0,	1)
+MUX_CFG_24XX("K7_2430_MCBSP5_DX",	0x00EF,	1,	0,	0,	1)
+MUX_CFG_24XX("M1_2430_MCBSP5_DR",	0x00F0,	1,	0,	0,	1)
+
+/* 2430 MCSPI1 */
+MUX_CFG_24XX("Y18_2430_MCSPI1_CLK",	0x010F,	0,	0,	0,	1)
+MUX_CFG_24XX("AD15_2430_MCSPI1_SIMO",	0x0110,	0,	0,	0,	1)
+MUX_CFG_24XX("AE17_2430_MCSPI1_SOMI",	0x0111,	0,	0,	0,	1)
+MUX_CFG_24XX("U1_2430_MCSPI1_CS0",	0x0112,	0,	0,	0,	1)
+
+/* Touchscreen GPIO */
+MUX_CFG_24XX("AF19_2430_GPIO_85",	0x0113,	3,	0,	0,	1)
+
 };
 
 #define OMAP24XX_PINS_SZ	ARRAY_SIZE(omap24xx_pins)
@@ -417,6 +451,14 @@ MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188,
 MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
 		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
 
+
+/* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix.
+ * No internal pullup/pulldown without "_UP" or "_DOWN" suffix.
+ */
+MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 };
 
 #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
@@ -452,7 +494,7 @@ static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 r
 #endif
 
 #ifdef CONFIG_ARCH_OMAP24XX
-int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
+static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
 	unsigned long flags;
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 10ef464d6be7..15e509013def 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -12,11 +12,11 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <linux/usb/musb.h>
 
 #include <mach/gpmc.h>
-#include <mach/gpio.h>
 #include <mach/mux.h>
 
 
@@ -292,12 +292,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 			);
 
 	/* IRQ */
-	status = omap_request_gpio(irq);
+	status = gpio_request(irq, "TUSB6010 irq");
 	if (status < 0) {
 		printk(error, 3, status);
 		return status;
 	}
-	omap_set_gpio_direction(irq, 1);
+	gpio_direction_input(irq);
 	tusb_resources[2].start = irq + IH_GPIO_BASE;
 
 	/* set up memory timings ... can speed them up later */
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 3d4a1bc12355..edc38e2c856f 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -1,4 +1,4 @@
-obj-y				+= common.o addr-map.o pci.o gpio.o irq.o mpp.o
+obj-y				+= common.o addr-map.o pci.o irq.o mpp.o
 obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
 obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 437065c25c9c..0a623379789f 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -72,6 +72,7 @@ void __init orion5x_map_io(void)
  ****************************************************************************/
 static struct orion_ehci_data orion5x_ehci_data = {
 	.dram		= &orion5x_mbus_dram_info,
+	.phy_version	= EHCI_PHY_ORION,
 };
 
 static u64 ehci_dmamask = 0xffffffffUL;
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index a000c7c6ee96..798b9a5e3da9 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -51,13 +51,6 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
 struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
 int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
 
-/*
- * Valid GPIO pins according to MPP setup, used by machine-setup.
- * (/mach-orion/gpio.c).
- */
-void orion5x_gpio_set_valid(unsigned pin, int valid);
-void gpio_display(void);	/* debug */
-
 struct machine_desc;
 struct meminfo;
 struct tag;
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 3e66098340a5..0722d6510df1 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -21,6 +21,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
+#include <linux/ata_platform.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -64,9 +65,21 @@ static struct hw_pci dns323_pci __initdata = {
 	.map_irq	= dns323_pci_map_irq,
 };
 
+static int __init dns323_dev_id(void)
+{
+	u32 dev, rev;
+
+	orion5x_pcie_id(&dev, &rev);
+
+	return dev;
+}
+
 static int __init dns323_pci_init(void)
 {
-	if (machine_is_dns323())
+	/* The 5182 doesn't really use it's PCI bus, and initialising PCI
+	 * gets in the way of initialising the SATA controller.
+	 */
+	if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID)
 		pci_common_init(&dns323_pci);
 
 	return 0;
@@ -75,14 +88,6 @@ static int __init dns323_pci_init(void)
 subsys_initcall(dns323_pci_init);
 
 /****************************************************************************
- * Ethernet
- */
-
-static struct mv643xx_eth_platform_data dns323_eth_data = {
-	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-/****************************************************************************
  * 8MiB NOR flash (Spansion S29GL064M90TFIR4)
  *
  * Layout as used by D-Link:
@@ -143,6 +148,90 @@ static struct platform_device dns323_nor_flash = {
 };
 
 /****************************************************************************
+ * Ethernet
+ */
+
+static struct mv643xx_eth_platform_data dns323_eth_data = {
+	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
+ * functions be kept somewhere?
+ */
+static int __init dns323_parse_hex_nibble(char n)
+{
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init dns323_parse_hex_byte(const char *b)
+{
+	int hi;
+	int lo;
+
+	hi = dns323_parse_hex_nibble(b[0]);
+	lo = dns323_parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
+static int __init dns323_read_mac_addr(void)
+{
+	u_int8_t addr[6];
+	int i;
+	char *mac_page;
+
+	/* MAC address is stored as a regular ol' string in /dev/mtdblock4
+	 * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
+	 */
+	mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024);
+	if (!mac_page)
+		return -ENOMEM;
+
+	/* Sanity check the string we're looking at */
+	for (i = 0; i < 5; i++) {
+		if (*(mac_page + (i * 3) + 2) != ':') {
+			goto error_fail;
+		}
+	}
+
+	for (i = 0; i < 6; i++)	{
+		int byte;
+
+		byte = dns323_parse_hex_byte(mac_page + (i * 3));
+		if (byte < 0) {
+			goto error_fail;
+		}
+
+		addr[i] = byte;
+	}
+
+	iounmap(mac_page);
+	printk("DNS323: Found ethernet MAC address: ");
+	for (i = 0; i < 6; i++)
+		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+	memcpy(dns323_eth_data.mac_addr, addr, 6);
+
+	return 0;
+
+error_fail:
+	iounmap(mac_page);
+	return -EINVAL;
+}
+
+/****************************************************************************
  * GPIO LEDs (simple - doesn't use hardware blinking support)
  */
 
@@ -207,10 +296,17 @@ static struct platform_device dns323_button_device = {
 	},
 };
 
+/*****************************************************************************
+ * SATA
+ */
+static struct mv_sata_platform_data dns323_sata_data = {
+       .n_ports        = 2,
+};
+
 /****************************************************************************
  * General Setup
  */
-static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
+static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = {
 	{  0, MPP_PCIE_RST_OUTn },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
@@ -234,6 +330,30 @@ static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
 	{ -1 },
 };
 
+static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
+	{  0, MPP_UNUSED },
+	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
+	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
+	{  3, MPP_UNUSED },
+	{  4, MPP_GPIO },		/* power button LED */
+	{  5, MPP_GPIO },		/* power button LED */
+	{  6, MPP_GPIO },		/* GMT G751-2f overtemp */
+	{  7, MPP_GPIO },		/* M41T80 nIRQ/OUT/SQW */
+	{  8, MPP_GPIO },		/* triggers power off */
+	{  9, MPP_GPIO },		/* power button switch */
+	{ 10, MPP_GPIO },		/* reset button switch */
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_SATA_LED },
+	{ 13, MPP_SATA_LED },
+	{ 14, MPP_SATA_LED },
+	{ 15, MPP_SATA_LED },
+	{ 16, MPP_UNUSED },
+	{ 17, MPP_UNUSED },
+	{ 18, MPP_UNUSED },
+	{ 19, MPP_UNUSED },
+	{ -1 },
+};
+
 /*
  * On the DNS-323 the following devices are attached via I2C:
  *
@@ -264,16 +384,15 @@ static void __init dns323_init(void)
 	/* Setup basic Orion functions. Need to be called early. */
 	orion5x_init();
 
-	orion5x_mpp_conf(dns323_mpp_modes);
-	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
-
-	/*
-	 * Configure peripherals.
+	/* Just to be tricky, the 5182 has a completely different
+	 * set of MPP modes to the 5181.
 	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&dns323_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		orion5x_mpp_conf(dns323_mv88f5182_mpp_modes);
+	else {
+		orion5x_mpp_conf(dns323_mv88f5181_mpp_modes);
+		writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
+	}
 
 	/* setup flash mapping
 	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
@@ -288,6 +407,23 @@ static void __init dns323_init(void)
 	i2c_register_board_info(0, dns323_i2c_devices,
 				ARRAY_SIZE(dns323_i2c_devices));
 
+	/*
+	 * Configure peripherals.
+	 */
+	if (dns323_read_mac_addr() < 0)
+		printk("DNS323: Failed to read MAC address\n");
+
+	orion5x_ehci0_init();
+	orion5x_eth_init(&dns323_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+
+	/* The 5182 has it's SATA controller on-chip, and needs it's own little
+	 * init routine.
+	 */
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		orion5x_sata_init(&dns323_sata_data);
+
 	/* register dns323 specific power-off method */
 	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
deleted file mode 100644
index f99d08811e5a..000000000000
--- a/arch/arm/mach-orion5x/gpio.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * arch/arm/mach-orion5x/gpio.c
- *
- * GPIO functions for Marvell Orion System On Chip
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <asm/gpio.h>
-#include <mach/orion5x.h>
-#include "common.h"
-
-static DEFINE_SPINLOCK(gpio_lock);
-static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
-static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
-
-void __init orion5x_gpio_set_valid(unsigned pin, int valid)
-{
-	if (valid)
-		__set_bit(pin, gpio_valid);
-	else
-		__clear_bit(pin, gpio_valid);
-}
-
-/*
- * GENERIC_GPIO primitives
- */
-int gpio_direction_input(unsigned pin)
-{
-	unsigned long flags;
-
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	/*
-	 * Some callers might have not used the gpio_request(),
-	 * so flag this pin as requested now.
-	 */
-	if (!gpio_label[pin])
-		gpio_label[pin] = "?";
-
-	orion5x_setbits(GPIO_IO_CONF, 1 << pin);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned pin, int value)
-{
-	unsigned long flags;
-	int mask;
-
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	/*
-	 * Some callers might have not used the gpio_request(),
-	 * so flag this pin as requested now.
-	 */
-	if (!gpio_label[pin])
-		gpio_label[pin] = "?";
-
-	mask = 1 << pin;
-	orion5x_clrbits(GPIO_BLINK_EN, mask);
-	if (value)
-		orion5x_setbits(GPIO_OUT, mask);
-	else
-		orion5x_clrbits(GPIO_OUT, mask);
-	orion5x_clrbits(GPIO_IO_CONF, mask);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-int gpio_get_value(unsigned pin)
-{
-	int val, mask = 1 << pin;
-
-	if (readl(GPIO_IO_CONF) & mask)
-		val = readl(GPIO_DATA_IN) ^ readl(GPIO_IN_POL);
-	else
-		val = readl(GPIO_OUT);
-
-	return val & mask;
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-void gpio_set_value(unsigned pin, int value)
-{
-	unsigned long flags;
-	int mask = 1 << pin;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	orion5x_clrbits(GPIO_BLINK_EN, mask);
-	if (value)
-		orion5x_setbits(GPIO_OUT, mask);
-	else
-		orion5x_clrbits(GPIO_OUT, mask);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-}
-EXPORT_SYMBOL(gpio_set_value);
-
-void orion5x_gpio_set_blink(unsigned pin, int blink)
-{
-	unsigned long flags;
-	int mask = 1 << pin;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	orion5x_clrbits(GPIO_OUT, mask);
-	if (blink)
-		orion5x_setbits(GPIO_BLINK_EN, mask);
-	else
-		orion5x_clrbits(GPIO_BLINK_EN, mask);
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-}
-EXPORT_SYMBOL(orion5x_gpio_set_blink);
-
-int gpio_request(unsigned pin, const char *label)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	if (gpio_label[pin]) {
-		pr_debug("%s: GPIO %d already used as %s\n",
-			 __func__, pin, gpio_label[pin]);
-		ret = -EBUSY;
-	} else
-		gpio_label[pin] = label ? label : "?";
-
-	spin_unlock_irqrestore(&gpio_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(gpio_request);
-
-void gpio_free(unsigned pin)
-{
-	might_sleep();
-
-	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-		return;
-	}
-
-	if (!gpio_label[pin])
-		pr_warning("%s: GPIO %d already freed\n", __func__, pin);
-	else
-		gpio_label[pin] = NULL;
-}
-EXPORT_SYMBOL(gpio_free);
-
-/* Debug helper */
-void gpio_display(void)
-{
-	int i;
-
-	for (i = 0; i < GPIO_MAX; i++) {
-		printk(KERN_DEBUG "Pin-%d: ", i);
-
-		if (!test_bit(i, gpio_valid)) {
-			printk("non-GPIO\n");
-		} else if (!gpio_label[i]) {
-			printk("GPIO, free\n");
-		} else {
-			printk("GPIO, used by %s, ", gpio_label[i]);
-			if (readl(GPIO_IO_CONF) & (1 << i)) {
-				printk("input, active %s, level %s, edge %s\n",
-				((readl(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
-				((readl(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
-				((readl(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
-			} else {
-				printk("output, val=%d\n", (readl(GPIO_OUT) >> i) & 1);
-			}
-		}
-	}
-
-	printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n",
-				MPP_0_7_CTRL, readl(MPP_0_7_CTRL));
-	printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n",
-				MPP_8_15_CTRL, readl(MPP_8_15_CTRL));
-	printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n",
-				MPP_16_19_CTRL, readl(MPP_16_19_CTRL));
-	printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n",
-				MPP_DEV_CTRL, readl(MPP_DEV_CTRL));
-	printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n",
-				GPIO_OUT, readl(GPIO_OUT));
-	printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n",
-				GPIO_IO_CONF, readl(GPIO_IO_CONF));
-	printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n",
-				GPIO_BLINK_EN, readl(GPIO_BLINK_EN));
-	printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n",
-				GPIO_IN_POL, readl(GPIO_IN_POL));
-	printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n",
-				GPIO_DATA_IN, readl(GPIO_DATA_IN));
-	printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n",
-				GPIO_LEVEL_MASK, readl(GPIO_LEVEL_MASK));
-	printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n",
-				GPIO_EDGE_CAUSE, readl(GPIO_EDGE_CAUSE));
-	printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n",
-				GPIO_EDGE_MASK, readl(GPIO_EDGE_MASK));
-}
diff --git a/arch/arm/mach-orion5x/include/mach/dma.h b/arch/arm/mach-orion5x/include/mach/dma.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-orion5x/include/mach/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-orion5x/include/mach/gpio.h b/arch/arm/mach-orion5x/include/mach/gpio.h
index 65dc136a86f7..d8182e87ac16 100644
--- a/arch/arm/mach-orion5x/include/mach/gpio.h
+++ b/arch/arm/mach-orion5x/include/mach/gpio.h
@@ -2,18 +2,26 @@
  * arch/arm/mach-orion5x/include/mach/gpio.h
  *
  * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
+ * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-extern int gpio_request(unsigned pin, const char *label);
-extern void gpio_free(unsigned pin);
-extern int gpio_direction_input(unsigned pin);
-extern int gpio_direction_output(unsigned pin, int value);
-extern int gpio_get_value(unsigned pin);
-extern void gpio_set_value(unsigned pin, int value);
-extern void orion5x_gpio_set_blink(unsigned pin, int blink);
-extern void gpio_display(void);		/* debug */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+#define GPIO_MAX		32
+#define GPIO_OUT(pin)		ORION5X_DEV_BUS_REG(0x100)
+#define GPIO_IO_CONF(pin)	ORION5X_DEV_BUS_REG(0x104)
+#define GPIO_BLINK_EN(pin)	ORION5X_DEV_BUS_REG(0x108)
+#define GPIO_IN_POL(pin)	ORION5X_DEV_BUS_REG(0x10c)
+#define GPIO_DATA_IN(pin)	ORION5X_DEV_BUS_REG(0x110)
+#define GPIO_EDGE_CAUSE(pin)	ORION5X_DEV_BUS_REG(0x114)
+#define GPIO_EDGE_MASK(pin)	ORION5X_DEV_BUS_REG(0x118)
+#define GPIO_LEVEL_MASK(pin)	ORION5X_DEV_BUS_REG(0x11c)
 
 static inline int gpio_to_irq(int pin)
 {
@@ -25,4 +33,5 @@ static inline int irq_to_gpio(int irq)
 	return irq - IRQ_ORION5X_GPIO_START;
 }
 
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
index f24b2513f7f3..c47b033bd999 100644
--- a/arch/arm/mach-orion5x/include/mach/io.h
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -38,14 +38,9 @@ __arch_iounmap(void __iomem *addr)
 		__iounmap(addr);
 }
 
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
 #define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
 #define __arch_iounmap(a)	__arch_iounmap(a)
-#define __io(a)			__io(a)
+#define __io(a)			__typesafe_io(a)
 #define __mem_pci(a)		(a)
 
 
diff --git a/arch/arm/mach-orion5x/include/mach/irqs.h b/arch/arm/mach-orion5x/include/mach/irqs.h
index d5b0fbf6b965..a6fa9d8f12d8 100644
--- a/arch/arm/mach-orion5x/include/mach/irqs.h
+++ b/arch/arm/mach-orion5x/include/mach/irqs.h
@@ -13,8 +13,6 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include "orion5x.h"	/* need GPIO_MAX */
-
 /*
  * Orion Main Interrupt Controller
  */
@@ -54,7 +52,7 @@
  * Orion General Purpose Pins
  */
 #define IRQ_ORION5X_GPIO_START	32
-#define NR_GPIO_IRQS		GPIO_MAX
+#define NR_GPIO_IRQS		32
 
 #define NR_IRQS			(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
 
diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h
index 54dd76b013f2..52a2955d0f87 100644
--- a/arch/arm/mach-orion5x/include/mach/memory.h
+++ b/arch/arm/mach-orion5x/include/mach/memory.h
@@ -9,8 +9,4 @@
 
 #define PHYS_OFFSET	UL(0x00000000)
 
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
 #endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 9f5ce1ce5840..67bda31406dd 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -134,14 +134,6 @@
 #define MPP_16_19_CTRL		ORION5X_DEV_BUS_REG(0x050)
 #define MPP_DEV_CTRL		ORION5X_DEV_BUS_REG(0x008)
 #define MPP_RESET_SAMPLE	ORION5X_DEV_BUS_REG(0x010)
-#define GPIO_OUT		ORION5X_DEV_BUS_REG(0x100)
-#define GPIO_IO_CONF		ORION5X_DEV_BUS_REG(0x104)
-#define GPIO_BLINK_EN		ORION5X_DEV_BUS_REG(0x108)
-#define GPIO_IN_POL		ORION5X_DEV_BUS_REG(0x10c)
-#define GPIO_DATA_IN		ORION5X_DEV_BUS_REG(0x110)
-#define GPIO_EDGE_CAUSE		ORION5X_DEV_BUS_REG(0x114)
-#define GPIO_EDGE_MASK		ORION5X_DEV_BUS_REG(0x118)
-#define GPIO_LEVEL_MASK		ORION5X_DEV_BUS_REG(0x11c)
 #define DEV_BANK_0_PARAM	ORION5X_DEV_BUS_REG(0x45c)
 #define DEV_BANK_1_PARAM	ORION5X_DEV_BUS_REG(0x460)
 #define DEV_BANK_2_PARAM	ORION5X_DEV_BUS_REG(0x464)
@@ -149,7 +141,6 @@
 #define DEV_BUS_CTRL		ORION5X_DEV_BUS_REG(0x4c0)
 #define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
 #define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
-#define GPIO_MAX		32
 
 /***************************************************************************
  * Orion CPU Bridge Registers
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 632a36f5cf14..0caae43301e5 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -19,193 +19,38 @@
 #include <plat/irq.h>
 #include "common.h"
 
-/*****************************************************************************
- * Orion GPIO IRQ
- *
- * GPIO_IN_POL register controlls whether GPIO_DATA_IN will hold the same
- * value of the line or the opposite value.
- *
- * Level IRQ handlers: DATA_IN is used directly as cause register.
- *                     Interrupt are masked by LEVEL_MASK registers.
- * Edge IRQ handlers:  Change in DATA_IN are latched in EDGE_CAUSE.
- *                     Interrupt are masked by EDGE_MASK registers.
- * Both-edge handlers: Similar to regular Edge handlers, but also swaps
- *                     the polarity to catch the next line transaction.
- *                     This is a race condition that might not perfectly
- *                     work on some use cases.
- *
- * Every eight GPIO lines are grouped (OR'ed) before going up to main
- * cause register.
- *
- *                    EDGE  cause    mask
- *        data-in   /--------| |-----| |----\
- *     -----| |-----                         ---- to main cause reg
- *           X      \----------------| |----/
- *        polarity    LEVEL          mask
- *
- ****************************************************************************/
-static void orion5x_gpio_irq_ack(u32 irq)
-{
-	int pin = irq_to_gpio(irq);
-	if (irq_desc[irq].status & IRQ_LEVEL)
-		/*
-		 * Mask bit for level interrupt
-		 */
-		orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin);
-	else
-		/*
-		 * Clear casue bit for egde interrupt
-		 */
-		orion5x_clrbits(GPIO_EDGE_CAUSE, 1 << pin);
-}
-
-static void orion5x_gpio_irq_mask(u32 irq)
-{
-	int pin = irq_to_gpio(irq);
-	if (irq_desc[irq].status & IRQ_LEVEL)
-		orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin);
-	else
-		orion5x_clrbits(GPIO_EDGE_MASK, 1 << pin);
-}
-
-static void orion5x_gpio_irq_unmask(u32 irq)
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
-	int pin = irq_to_gpio(irq);
-	if (irq_desc[irq].status & IRQ_LEVEL)
-		orion5x_setbits(GPIO_LEVEL_MASK, 1 << pin);
-	else
-		orion5x_setbits(GPIO_EDGE_MASK, 1 << pin);
-}
-
-static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
-{
-	int pin = irq_to_gpio(irq);
-	struct irq_desc *desc;
-
-	if ((readl(GPIO_IO_CONF) & (1 << pin)) == 0) {
-		printk(KERN_ERR "orion5x_gpio_set_irq_type failed "
-				"(irq %d, pin %d).\n", irq, pin);
-		return -EINVAL;
-	}
-
-	desc = irq_desc + irq;
-
-	switch (type) {
-	case IRQ_TYPE_LEVEL_HIGH:
-		desc->handle_irq = handle_level_irq;
-		desc->status |= IRQ_LEVEL;
-		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		desc->handle_irq = handle_level_irq;
-		desc->status |= IRQ_LEVEL;
-		orion5x_setbits(GPIO_IN_POL, (1 << pin));
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-		desc->handle_irq = handle_edge_irq;
-		desc->status &= ~IRQ_LEVEL;
-		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		desc->handle_irq = handle_edge_irq;
-		desc->status &= ~IRQ_LEVEL;
-		orion5x_setbits(GPIO_IN_POL, (1 << pin));
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		desc->handle_irq = handle_edge_irq;
-		desc->status &= ~IRQ_LEVEL;
-		/*
-		 * set initial polarity based on current input level
-		 */
-		if ((readl(GPIO_IN_POL) ^ readl(GPIO_DATA_IN))
-		    & (1 << pin))
-			orion5x_setbits(GPIO_IN_POL, (1 << pin)); /* falling */
-		else
-			orion5x_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */
-
-		break;
-	default:
-		printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
-		return -EINVAL;
-	}
-
-	desc->status &= ~IRQ_TYPE_SENSE_MASK;
-	desc->status |= type & IRQ_TYPE_SENSE_MASK;
-
-	return 0;
-}
-
-static struct irq_chip orion5x_gpio_irq_chip = {
-	.name		= "Orion-IRQ-GPIO",
-	.ack		= orion5x_gpio_irq_ack,
-	.mask		= orion5x_gpio_irq_mask,
-	.unmask		= orion5x_gpio_irq_unmask,
-	.set_type	= orion5x_gpio_set_irq_type,
-};
-
-static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	u32 cause, offs, pin;
-
 	BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31);
-	offs = (irq - IRQ_ORION5X_GPIO_0_7) * 8;
-	cause = (readl(GPIO_DATA_IN) & readl(GPIO_LEVEL_MASK)) |
-		(readl(GPIO_EDGE_CAUSE) & readl(GPIO_EDGE_MASK));
 
-	for (pin = offs; pin < offs + 8; pin++) {
-		if (cause & (1 << pin)) {
-			irq = gpio_to_irq(pin);
-			desc = irq_desc + irq;
-			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
-				/* Swap polarity (race with GPIO line) */
-				u32 polarity = readl(GPIO_IN_POL);
-				polarity ^= 1 << pin;
-				writel(polarity, GPIO_IN_POL);
-			}
-			generic_handle_irq(irq);
-		}
-	}
+	orion_gpio_irq_handler((irq - IRQ_ORION5X_GPIO_0_7) << 3);
 }
 
-static void __init orion5x_init_gpio_irq(void)
+void __init orion5x_init_irq(void)
 {
 	int i;
-	struct irq_desc *desc;
+
+	orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK);
 
 	/*
 	 * Mask and clear GPIO IRQ interrupts
 	 */
-	writel(0x0, GPIO_LEVEL_MASK);
-	writel(0x0, GPIO_EDGE_MASK);
-	writel(0x0, GPIO_EDGE_CAUSE);
+	writel(0x0, GPIO_LEVEL_MASK(0));
+	writel(0x0, GPIO_EDGE_MASK(0));
+	writel(0x0, GPIO_EDGE_CAUSE(0));
 
 	/*
 	 * Register chained level handlers for GPIO IRQs by default.
 	 * User can use set_type() if he wants to use edge types handlers.
 	 */
 	for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) {
-		set_irq_chip(i, &orion5x_gpio_irq_chip);
+		set_irq_chip(i, &orion_gpio_irq_level_chip);
 		set_irq_handler(i, handle_level_irq);
-		desc = irq_desc + i;
-		desc->status |= IRQ_LEVEL;
+		irq_desc[i].status |= IRQ_LEVEL;
 		set_irq_flags(i, IRQF_VALID);
 	}
-	set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, orion5x_gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, orion5x_gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, orion5x_gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION5X_GPIO_24_31, orion5x_gpio_irq_handler);
-}
-
-/*****************************************************************************
- * Orion Main IRQ
- ****************************************************************************/
-static void __init orion5x_init_main_irq(void)
-{
-	orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK);
-}
-
-void __init orion5x_init_irq(void)
-{
-	orion5x_init_main_irq();
-	orion5x_init_gpio_irq();
+	set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_ORION5X_GPIO_24_31, gpio_irq_handler);
 }
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index 640ea2a3fc6c..e23a3f91d6c6 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/io.h>
+#include <asm/gpio.h>
 #include <mach/hardware.h>
 #include "common.h"
 #include "mpp.h"
@@ -152,7 +153,10 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
 		*reg &= ~(0xf << shift);
 		*reg |= (num_type & 0xf) << shift;
 
-		orion5x_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
+		if (mode->type == MPP_UNUSED && (mode->mpp < 16 || is_5182()))
+			orion_gpio_set_unused(mode->mpp);
+
+		orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
 
 		mode++;
 	}
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index ac2f70eddb9e..425f7188505e 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -25,9 +25,8 @@
 
 #include <asm/system.h>
 #include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
 #include <asm/dma-mapping.h>
-#include <asm/mach/dma.h>
 #include <mach/clock.h>
 
 static struct dma_channel {
diff --git a/arch/arm/mach-pnx4008/include/mach/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h
index 5442d04fc575..f094bf8bfb18 100644
--- a/arch/arm/mach-pnx4008/include/mach/dma.h
+++ b/arch/arm/mach-pnx4008/include/mach/dma.h
@@ -16,8 +16,6 @@
 
 #include "platform.h"
 
-#define MAX_DMA_ADDRESS		0xffffffff
-
 #define MAX_DMA_CHANNELS	8
 
 #define DMAC_BASE		IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
diff --git a/arch/arm/mach-pnx4008/include/mach/io.h b/arch/arm/mach-pnx4008/include/mach/io.h
index c6206f25839d..cbf0904540ea 100644
--- a/arch/arm/mach-pnx4008/include/mach/io.h
+++ b/arch/arm/mach-pnx4008/include/mach/io.h
@@ -15,7 +15,7 @@
 
 #define IO_SPACE_LIMIT 0xffffffff
 
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h
index 5789a2d16f5a..0e8770081058 100644
--- a/arch/arm/mach-pnx4008/include/mach/memory.h
+++ b/arch/arm/mach-pnx4008/include/mach/memory.h
@@ -16,9 +16,6 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET     (0x80000000)
-
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET)
+#define PHYS_OFFSET	UL(0x80000000)
 
 #endif
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 94e3adbecd00..8eea7306f29b 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -399,11 +399,13 @@ endmenu
 
 config PXA25x
 	bool
+	select CPU_XSCALE
 	help
 	  Select code specific to PXA21x/25x/26x variants
 
 config PXA27x
 	bool
+	select CPU_XSCALE
 	help
 	  Select code specific to PXA27x variants
 
@@ -415,6 +417,7 @@ config CPU_PXA26x
 
 config PXA3xx
 	bool
+	select CPU_XSC3
 	help
 	  Select code specific to PXA3xx variants
 
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index fd6142054578..77ee80e5e47b 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -30,8 +30,12 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
+#include <mach/gumstix.h>
+#include <mach/mfp-pxa25x.h>
 #include <mach/pxafb.h>
 
+#include "generic.h"
+
 #include <video/metronomefb.h>
 
 static unsigned int panel_type = 6;
@@ -331,6 +335,15 @@ static struct metronome_board am200_board = {
 	.cleanup		= am200_cleanup,
 };
 
+static unsigned long am200_pin_config[] __initdata = {
+	GPIO51_GPIO,
+	GPIO49_GPIO,
+	GPIO48_GPIO,
+	GPIO32_GPIO,
+	GPIO17_GPIO,
+	GPIO16_GPIO,
+};
+
 int __init am200_init(void)
 {
 	int ret;
@@ -339,6 +352,8 @@ int __init am200_init(void)
 	 * creation events */
 	fb_register_client(&am200_fb_notif);
 
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(am200_pin_config));
+
 	/* request our platform independent driver */
 	request_module("metronomefb");
 
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index 9fcba78ad584..40b774084514 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
+#include <asm/clkdev.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/hardware.h>
 
@@ -19,45 +20,8 @@
 #include "generic.h"
 #include "clock.h"
 
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
 static DEFINE_SPINLOCK(clocks_lock);
 
-static struct clk *clk_lookup(struct device *dev, const char *id)
-{
-	struct clk *p;
-
-	list_for_each_entry(p, &clocks, node)
-		if (strcmp(id, p->name) == 0 && p->dev == dev)
-			return p;
-
-	return NULL;
-}
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	p = clk_lookup(dev, id);
-	if (!p)
-		p = clk_lookup(NULL, id);
-	if (p)
-		clk = p;
-	mutex_unlock(&clocks_mutex);
-
-	if (!IS_ERR(clk) && clk->ops == NULL)
-		clk = clk->other;
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
@@ -115,37 +79,27 @@ const struct clkops clk_cken_ops = {
 	.disable	= clk_cken_disable,
 };
 
-void clks_register(struct clk *clks, size_t num)
+void clks_register(struct clk_lookup *clks, size_t num)
 {
 	int i;
 
-	mutex_lock(&clocks_mutex);
 	for (i = 0; i < num; i++)
-		list_add(&clks[i].node, &clocks);
-	mutex_unlock(&clocks_mutex);
+		clkdev_add(&clks[i]);
 }
 
 int clk_add_alias(char *alias, struct device *alias_dev, char *id,
 	struct device *dev)
 {
-	struct clk *r = clk_lookup(dev, id);
-	struct clk *new;
+	struct clk *r = clk_get(dev, id);
+	struct clk_lookup *l;
 
 	if (!r)
 		return -ENODEV;
 
-	new = kzalloc(sizeof(struct clk), GFP_KERNEL);
-
-	if (!new)
-		return -ENOMEM;
-
-	new->name = alias;
-	new->dev = alias_dev;
-	new->other = r;
-
-	mutex_lock(&clocks_mutex);
-	list_add(&new->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-
+	l = clkdev_alloc(r, alias, alias_dev ? dev_name(alias_dev) : NULL);
+	clk_put(r);
+	if (!l)
+		return -ENODEV;
+	clkdev_add(l);
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 73be795fe3bf..4e9c613c6767 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,6 +1,4 @@
-#include <linux/list.h>
-
-struct clk;
+#include <asm/clkdev.h>
 
 struct clkops {
 	void			(*enable)(struct clk *);
@@ -9,9 +7,6 @@ struct clkops {
 };
 
 struct clk {
-	struct list_head	node;
-	const char		*name;
-	struct device		*dev;
 	const struct clkops	*ops;
 	unsigned long		rate;
 	unsigned int		cken;
@@ -20,41 +15,31 @@ struct clk {
 	struct clk		*other;
 };
 
-#define INIT_CKEN(_name, _cken, _rate, _delay, _dev)	\
+#define INIT_CLKREG(_clk,_devname,_conname)		\
 	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
+		.clk		= _clk,			\
+		.dev_id		= _devname,		\
+		.con_id		= _conname,		\
+	}
+
+#define DEFINE_CKEN(_name, _cken, _rate, _delay)	\
+struct clk clk_##_name = {				\
 		.ops	= &clk_cken_ops,		\
 		.rate	= _rate,			\
 		.cken	= CKEN_##_cken,			\
 		.delay	= _delay,			\
 	}
 
-#define INIT_CK(_name, _cken, _ops, _dev)		\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
+#define DEFINE_CK(_name, _cken, _ops)			\
+struct clk clk_##_name = {				\
 		.ops	= _ops,				\
 		.cken	= CKEN_##_cken,			\
 	}
 
-/*
- * This is a placeholder to alias one clock device+name pair
- * to another struct clk.
- */
-#define INIT_CKOTHER(_name, _other, _dev)		\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
-		.other	= _other,			\
-	}
-
-#define INIT_CLK(_name, _ops, _rate, _delay, _dev)      \
-	{                                               \
-		.name   = _name,                        \
-		.dev    = _dev,                         \
-		.ops    = _ops,                         \
-		.rate   = _rate,                        \
+#define DEFINE_CLK(_name, _ops, _rate, _delay)		\
+struct clk clk_##_name = {				\
+		.ops	= _ops, 			\
+		.rate	= _rate,			\
 		.delay	= _delay,			\
 	}
 
@@ -64,20 +49,16 @@ void clk_cken_enable(struct clk *clk);
 void clk_cken_disable(struct clk *clk);
 
 #ifdef CONFIG_PXA3xx
-#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
+#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay)	\
+struct clk clk_##_name = {				\
 		.ops	= &clk_pxa3xx_cken_ops,		\
 		.rate	= _rate,			\
 		.cken	= CKEN_##_cken,			\
 		.delay	= _delay,			\
 	}
 
-#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
+#define DEFINE_PXA3_CK(_name, _cken, _ops)		\
+struct clk clk_##_name = {				\
 		.ops	= _ops,				\
 		.cken	= CKEN_##_cken,			\
 	}
@@ -87,7 +68,7 @@ extern void clk_pxa3xx_cken_enable(struct clk *);
 extern void clk_pxa3xx_cken_disable(struct clk *);
 #endif
 
-void clks_register(struct clk *clks, size_t num);
+void clks_register(struct clk_lookup *clks, size_t num);
 int clk_add_alias(char *alias, struct device *alias_dev, char *id,
 	struct device *dev);
 
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index c0be17e0ab82..b1514fb20d3a 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -21,7 +21,7 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
 
 #include <mach/pxa-regs.h>
 
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
index d488eded2058..1bd7f740427c 100644
--- a/arch/arm/mach-pxa/e330.c
+++ b/arch/arm/mach-pxa/e330.c
@@ -1,5 +1,5 @@
 /*
- * Hardware definitions for the Toshiba eseries PDAs
+ * Hardware definitions for the Toshiba e330 PDAs
  *
  * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
  *
@@ -12,6 +12,9 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/tc6387xb.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
@@ -19,13 +22,44 @@
 
 #include <mach/mfp-pxa25x.h>
 #include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 
 #include "generic.h"
 #include "eseries.h"
+#include "clock.h"
+
+/* -------------------- e330 tc6387xb parameters -------------------- */
+
+static struct tc6387xb_platform_data e330_tc6387xb_info = {
+	.enable   = &eseries_tmio_enable,
+	.disable  = &eseries_tmio_disable,
+	.suspend  = &eseries_tmio_suspend,
+	.resume   = &eseries_tmio_resume,
+};
+
+static struct platform_device e330_tc6387xb_device = {
+	.name           = "tc6387xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e330_tc6387xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* --------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e330_tc6387xb_device,
+};
 
 static void __init e330_init(void)
 {
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
index 8ecbc5479828..251129391d7d 100644
--- a/arch/arm/mach-pxa/e350.c
+++ b/arch/arm/mach-pxa/e350.c
@@ -1,5 +1,5 @@
 /*
- * Hardware definitions for the Toshiba eseries PDAs
+ * Hardware definitions for the Toshiba e350 PDAs
  *
  * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
  *
@@ -12,20 +12,54 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/t7l66xb.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
 #include <mach/mfp-pxa25x.h>
+#include <mach/pxa-regs.h>
 #include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 
 #include "generic.h"
 #include "eseries.h"
+#include "clock.h"
+
+/* -------------------- e350 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e350_t7l66xb_info = {
+	.irq_base               = IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e350_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e350_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e350_t7l66xb_device,
+};
 
 static void __init e350_init(void)
 {
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
index ed8bb543a390..bed0336aca3d 100644
--- a/arch/arm/mach-pxa/e400.c
+++ b/arch/arm/mach-pxa/e400.c
@@ -12,20 +12,26 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/t7l66xb.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/mfp-pxa25x.h>
+#include <mach/pxa-regs.h>
 #include <mach/hardware.h>
-
+#include <mach/eseries-gpio.h>
 #include <mach/pxafb.h>
 #include <mach/udc.h>
 
 #include "generic.h"
 #include "eseries.h"
+#include "clock.h"
 
 /* ------------------------ E400 LCD definitions ------------------------ */
 
@@ -65,7 +71,10 @@ static unsigned long e400_pin_config[] __initdata = {
 	GPIO42_BTUART_RXD,
 	GPIO43_BTUART_TXD,
 	GPIO44_BTUART_CTS,
-	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
 
 	/* wakeup */
 	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
@@ -73,10 +82,60 @@ static unsigned long e400_pin_config[] __initdata = {
 
 /* ---------------------------------------------------------------------- */
 
+static struct mtd_partition partition_a = {
+	.name = "Internal NAND flash",
+	.offset =  0,
+	.size =  MTDPART_SIZ_FULL,
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static struct tmio_nand_data e400_t7l66xb_nand_config = {
+	.num_partitions = 1,
+	.partition = &partition_a,
+	.badblock_pattern = &e400_t7l66xb_nand_bbt,
+};
+
+static struct t7l66xb_platform_data e400_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+
+	.nand_data              = &e400_t7l66xb_nand_config,
+};
+
+static struct platform_device e400_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e400_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e400_t7l66xb_device,
+};
+
 static void __init e400_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	/* Fixme - e400 may have a switched clock */
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
 	set_pxa_fb_info(&e400_pxafb_mach_info);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index c57a15b37f0d..b00d670b2ea6 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -15,6 +15,8 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
+#include <linux/clk.h>
+#include <linux/mfd/t7l66xb.h>
 
 #include <video/w100fb.h>
 
@@ -23,12 +25,16 @@
 #include <asm/mach-types.h>
 
 #include <mach/mfp-pxa25x.h>
+#include <mach/pxa-regs.h>
 #include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
 #include <mach/udc.h>
+#include <mach/irda.h>
 
 #include "generic.h"
 #include "eseries.h"
-
+#include "clock.h"
+#include "devices.h"
 
 /* ------------------------ e740 video support --------------------------- */
 
@@ -116,7 +122,17 @@ static unsigned long e740_pin_config[] __initdata = {
 	GPIO42_BTUART_RXD,
 	GPIO43_BTUART_TXD,
 	GPIO44_BTUART_CTS,
-	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* UDC */
+	GPIO13_GPIO,
+	GPIO3_GPIO,
+
+	/* IrDA */
+	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
@@ -142,17 +158,43 @@ static unsigned long e740_pin_config[] __initdata = {
 	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
 };
 
+/* -------------------- e740 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e740_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e740_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e740_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
 /* ----------------------------------------------------------------------- */
 
 static struct platform_device *devices[] __initdata = {
 	&e740_fb_device,
+	&e740_t7l66xb_device,
 };
 
 static void __init e740_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	eseries_register_clks();
+	clk_add_alias("CLK_CK48M", &e740_t7l66xb_device.dev,
+			"UDCCLK", &pxa25x_device_udc.dev),
+	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
+	e7xx_irda_init();
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
 
 MACHINE_START(E740, "Toshiba e740")
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 640e738b85df..84d7c1aac58d 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -15,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
+#include <linux/mfd/tc6393xb.h>
 
 #include <video/w100fb.h>
 
@@ -23,11 +24,15 @@
 #include <asm/mach-types.h>
 
 #include <mach/mfp-pxa25x.h>
+#include <mach/pxa-regs.h>
 #include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
 #include <mach/udc.h>
+#include <mach/irda.h>
 
 #include "generic.h"
 #include "eseries.h"
+#include "clock.h"
 
 /* ---------------------- E750 LCD definitions -------------------- */
 
@@ -100,16 +105,45 @@ static struct platform_device e750_fb_device = {
 	.resource       = e750_fb_resources,
 };
 
-/* ----------------------------------------------------------------------- */
+/* ----------------- e750 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e750_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e750_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e750_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ------------------------------------------------------------- */
 
 static struct platform_device *devices[] __initdata = {
 	&e750_fb_device,
+	&e750_tc6393xb_device,
 };
 
 static void __init e750_init(void)
 {
+	clk_add_alias("CLK_CK3P6MI", &e750_tc6393xb_device.dev,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
+	e7xx_irda_init();
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
 
 MACHINE_START(E750, "Toshiba e750")
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index a293e09bfe25..9a86a426f924 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -15,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
+#include <linux/mfd/tc6393xb.h>
 
 #include <video/w100fb.h>
 
@@ -23,12 +24,14 @@
 #include <asm/mach-types.h>
 
 #include <mach/mfp-pxa25x.h>
+#include <mach/pxa-regs.h>
 #include <mach/hardware.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 
 #include "generic.h"
 #include "eseries.h"
+#include "clock.h"
 
 /* ------------------------ e800 LCD definitions ------------------------- */
 
@@ -160,14 +163,41 @@ static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
 	.gpio_pullup_inverted = 1
 };
 
+/* ----------------- e800 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e800_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e800_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e800_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
 /* ----------------------------------------------------------------------- */
 
 static struct platform_device *devices[] __initdata = {
 	&e800_fb_device,
+	&e800_tc6393xb_device,
 };
 
 static void __init e800_init(void)
 {
+	clk_add_alias("CLK_CK3P6MI", &e800_tc6393xb_device.dev,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e800_udc_mach_info);
 }
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index d28849b50a14..dfce7d5b659e 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -12,6 +12,9 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
@@ -21,8 +24,10 @@
 #include <mach/hardware.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
+#include <mach/irda.h>
 
 #include "generic.h"
+#include "clock.h"
 
 /* Only e800 has 128MB RAM */
 void __init eseries_fixup(struct machine_desc *desc,
@@ -43,3 +48,122 @@ struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
 	.gpio_pullup_inverted = 1
 };
 
+static void e7xx_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		gpio_set_value(GPIO_E7XX_IR_OFF, 1);
+		pxa2xx_transceiver_mode(dev, mode);
+	} else {
+		pxa2xx_transceiver_mode(dev, mode);
+		gpio_set_value(GPIO_E7XX_IR_OFF, 0);
+	}
+}
+
+int e7xx_irda_init(void)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_E7XX_IR_OFF, "IrDA power");
+	if (ret)
+		goto out;
+
+	ret = gpio_direction_output(GPIO_E7XX_IR_OFF, 0);
+	if (ret)
+		goto out;
+
+	e7xx_irda_transceiver_mode(NULL, IR_SIRMODE | IR_OFF);
+out:
+	return ret;
+}
+
+static void e7xx_irda_shutdown(struct device *dev)
+{
+	e7xx_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+	gpio_free(GPIO_E7XX_IR_OFF);
+}
+
+struct pxaficp_platform_data e7xx_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = e7xx_irda_transceiver_mode,
+	.shutdown = e7xx_irda_shutdown,
+};
+
+int eseries_tmio_enable(struct platform_device *dev)
+{
+	/* Reset - bring SUSPEND high before PCLR */
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
+	msleep(1);
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
+	msleep(1);
+	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
+	msleep(1);
+	return 0;
+}
+
+int eseries_tmio_disable(struct platform_device *dev)
+{
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
+	return 0;
+}
+
+int eseries_tmio_suspend(struct platform_device *dev)
+{
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	return 0;
+}
+
+int eseries_tmio_resume(struct platform_device *dev)
+{
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
+	msleep(1);
+	return 0;
+}
+
+void eseries_get_tmio_gpios(void)
+{
+	gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
+	gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
+	gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
+}
+
+/* TMIO controller uses the same resources on all e-series machines. */
+struct resource eseries_tmio_resources[] = {
+	[0] = {
+		.start  = PXA_CS4_PHYS,
+		.end    = PXA_CS4_PHYS + 0x1fffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
+		.end    = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+/* Some e-series hardware cannot control the 32K clock */
+static void clk_32k_dummy(struct clk *clk)
+{
+}
+
+static const struct clkops clk_32k_dummy_ops = {
+	.enable         = clk_32k_dummy,
+	.disable        = clk_32k_dummy,
+};
+
+static struct clk tmio_dummy_clk = {
+	.ops	= &clk_32k_dummy_ops,
+	.rate	= 32768,
+};
+
+static struct clk_lookup eseries_clkregs[] = {
+	INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
+};
+
+void eseries_register_clks(void)
+{
+	clks_register(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
+}
+
diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h
index a83f88d4b6ad..5930f5e2a123 100644
--- a/arch/arm/mach-pxa/eseries.h
+++ b/arch/arm/mach-pxa/eseries.h
@@ -2,3 +2,15 @@ void __init eseries_fixup(struct machine_desc *desc,
 	struct tag *tags, char **cmdline, struct meminfo *mi);
 
 extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info;
+extern struct pxaficp_platform_data e7xx_ficp_platform_data;
+extern int e7xx_irda_init(void);
+
+extern int eseries_tmio_enable(struct platform_device *dev);
+extern int eseries_tmio_disable(struct platform_device *dev);
+extern int eseries_tmio_suspend(struct platform_device *dev);
+extern int eseries_tmio_resume(struct platform_device *dev);
+extern void eseries_get_tmio_gpios(void);
+extern struct resource eseries_tmio_resources[];
+extern struct platform_device e300_tc6387xb_device;
+extern void eseries_register_clks(void);
+
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 4f212e1b9539..df5f822f3b6c 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -22,6 +22,7 @@
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/i2c.h>
+#include <mach/hardware.h>
 #include <mach/pxa27x_keypad.h>
 
 #include <mach/mfp-pxa27x.h>
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 14d5103dafc9..e296ce11658c 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -184,13 +184,6 @@ static unsigned long gumstix_pin_config[] __initdata = {
 	GPIO6_MMC_CLK,
 	GPIO53_MMC_CLK,
 	GPIO8_MMC_CS0,
-	/* these are used by AM200EPD */
-	GPIO51_GPIO,
-	GPIO49_GPIO,
-	GPIO48_GPIO,
-	GPIO32_GPIO,
-	GPIO17_GPIO,
-	GPIO16_GPIO,
 };
 
 int __attribute__((weak)) am200_init(void)
diff --git a/arch/arm/mach-pxa/include/mach/clkdev.h b/arch/arm/mach-pxa/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index 955bfe606067..7804637a6df3 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -30,10 +30,6 @@ typedef enum {
 	DMA_PRIO_LOW = 2
 } pxa_dma_prio;
 
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define HAVE_ARCH_PCI_SET_DMA_MASK	1
-#endif
-
 /*
  * DMA registration
  */
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index 4c90b1310270..efbd2aa9ecec 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -43,8 +43,10 @@
 #define GPIO_E800_PCMCIA_PWR1    73
 
 /* e7xx IrDA power control */
-#define GPIO_E7XX_IR_ON          38
+#define GPIO_E7XX_IR_OFF         38
 
 /* ASIC related GPIOs */
 #define GPIO_ESERIES_TMIO_IRQ        5
+#define GPIO_ESERIES_TMIO_PCLR      19
+#define GPIO_ESERIES_TMIO_SUSPEND   45
 #define GPIO_E800_ANGELX_IRQ      8
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index e2d6784aa7ef..4e782ec38668 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -297,6 +297,8 @@ extern unsigned int get_memclk_frequency_10khz(void);
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
 #define pcibios_assign_all_busses()	1
+#define HAVE_ARCH_PCI_SET_DMA_MASK	1
 #endif
 
+
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
index 600fd4f76603..262691fb97d8 100644
--- a/arch/arm/mach-pxa/include/mach/io.h
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -6,15 +6,13 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/hardware.h>
-
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
  * We don't actually have real ISA nor PCI buses, but there is so many
  * drivers out there that might just work if we fake them...
  */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index 59aef89808d6..f626730ee42e 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -18,16 +18,6 @@
 #define PHYS_OFFSET	UL(0xa0000000)
 
 /*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-/*
  * The nodes are matched with the physical SDRAM banks as follows:
  *
  * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
@@ -47,6 +37,7 @@ void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
 	cmx2xx_pci_adjust_zones(node, size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
 #endif
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index 4d452fcb1508..cfca8155be72 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -15,6 +15,7 @@
 #ifndef __ARCH_PXA_MTD_XIP_H__
 #define __ARCH_PXA_MTD_XIP_H__
 
+#include <mach/hardware.h>
 #include <mach/pxa-regs.h>
 
 #define xip_irqpending()	(ICIP & ICMR)
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
index 7b8842cfa5fc..31e6a7b6ad80 100644
--- a/arch/arm/mach-pxa/include/mach/reset.h
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -12,9 +12,8 @@ extern void clear_reset_status(unsigned int mask);
 
 /**
  * init_gpio_reset() - register GPIO as reset generator
- *
- * @gpio - gpio nr
- * @output - set gpio as out/low instead of input during normal work
+ * @gpio: gpio nr
+ * @output: set gpio as out/low instead of input during normal work
  */
 extern int init_gpio_reset(int gpio, int output);
 
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 9207f10dfd13..2b427e015b6f 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -586,7 +586,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
 	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
 
 	/* Devices prepare suspend */
-	is_bt_on = gpio_get_value(GPIO83_BT_ON);
+	is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
 	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
 			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
 
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
index a647693d9856..324d25a48c85 100644
--- a/arch/arm/mach-pxa/mioa701_bootresume.S
+++ b/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -24,6 +24,7 @@ ENTRY(mioa701_jumpaddr)
 1:
 	mov	r0,     #0xa0000000	@ Don't suppose memory access works
 	orr	r0, r0, #0x00200000	@ even if it's supposed to
+	orr	r0, r0, #0x0000b000
 	mov	r1, #0
 	str	r1, [r0]		@ Early disable resume for next boot
 	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 4447711c9fc6..a9d94f5dbec4 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -56,6 +56,9 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO110_MMC_DAT_2,
 	GPIO111_MMC_DAT_3,
 	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO114_GPIO,	/* SD power */
+	GPIO115_GPIO,	/* SD r/o switch */
 
 	/* AC97 */
 	GPIO28_AC97_BITCLK,
@@ -64,6 +67,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO31_AC97_SYNC,
 
 	/* IrDA */
+	GPIO40_GPIO,	/* ir disable */
 	GPIO46_FICP_RXD,
 	GPIO47_FICP_TXD,
 
@@ -71,7 +75,8 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO16_PWM0_OUT,
 
 	/* USB */
-	GPIO13_GPIO,
+	GPIO13_GPIO,	/* usb detect */
+	GPIO95_GPIO,	/* usb power */
 
 	/* PCMCIA */
 	GPIO48_nPOE,
@@ -84,6 +89,45 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO55_nPREG,
 	GPIO56_nPWAIT,
 	GPIO57_nIOIS16,
+	GPIO94_GPIO,	/* wifi power 1 */
+	GPIO108_GPIO,	/* wifi power 2 */
+	GPIO116_GPIO,	/* wifi ready */
+
+	/* MATRIX KEYPAD */
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO97_KP_MKIN_3,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* MISC. */
+	GPIO10_GPIO,	/* hotsync button */
+	GPIO12_GPIO,	/* power detect */
+	GPIO107_GPIO,	/* earphone detect */
 };
 
 /******************************************************************************
@@ -95,32 +139,49 @@ static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
 	int err = 0;
 
 	/* Setup an interrupt for detecting card insert/remove events */
-	err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
-			IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+	err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
+			palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			"SD/MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
 				__func__);
-		return err;
+		goto err2;
 	}
 
 	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
 	if (err)
-		goto pwr_err;
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
+	if (err)
+		goto err4;
 
 	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
 	if (err)
-		goto ro_err;
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
+	if (err)
+		goto err5;
 
 	printk(KERN_DEBUG "%s: irq registered\n", __func__);
 
 	return 0;
 
-ro_err:
+err5:
+	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+err4:
 	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-pwr_err:
-	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
+err:
 	return err;
 }
 
@@ -128,7 +189,8 @@ static void palmtx_mci_exit(struct device *dev, void *data)
 {
 	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
 	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
 }
 
 static void palmtx_mci_power(struct device *dev, unsigned int vdd)
@@ -167,7 +229,6 @@ static unsigned int palmtx_matrix_keys[] = {
 
 	KEY(3, 0, KEY_RIGHT),
 	KEY(3, 2, KEY_LEFT),
-
 };
 
 static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
@@ -209,11 +270,19 @@ static int palmtx_backlight_init(struct device *dev)
 	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
 	if (ret)
 		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
+	if (ret)
+		goto err2;
 	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
 	if (ret)
 		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
+	if (ret)
+		goto err3;
 
 	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
 err2:
 	gpio_free(GPIO_NR_PALMTX_BL_POWER);
 err:
@@ -254,6 +323,24 @@ static struct platform_device palmtx_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
+static int palmtx_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmtx_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+}
+
 static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 {
 	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
@@ -261,6 +348,8 @@ static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 }
 
 static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+	.startup		= palmtx_irda_startup,
+	.shutdown		= palmtx_irda_shutdown,
 	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
 	.transceiver_mode	= palmtx_irda_transceiver_mode,
 };
@@ -268,17 +357,11 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static void palmtx_udc_command(int cmd)
-{
-	gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
-	udelay(50);
-	gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
-}
-
 static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.udc_command		= palmtx_udc_command,
+	.gpio_pullup		= GPIO_NR_PALMTX_USB_POWER,
+	.gpio_pullup_inverted	= 0,
 };
 
 /******************************************************************************
@@ -290,17 +373,16 @@ static int power_supply_init(struct device *dev)
 
 	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
 	if (ret)
-		goto err_cs_ac;
-
-	ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
 	if (ret)
-		goto err_cs_usb;
+		goto err2;
 
 	return 0;
 
-err_cs_usb:
+err2:
 	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err_cs_ac:
+err1:
 	return ret;
 }
 
@@ -309,14 +391,8 @@ static int palmtx_is_ac_online(void)
 	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
-static int palmtx_is_usb_online(void)
-{
-	return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
-}
-
 static void power_supply_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
 	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
@@ -327,7 +403,6 @@ static char *palmtx_supplicants[] = {
 static struct pda_power_pdata power_supply_info = {
 	.init            = power_supply_init,
 	.is_ac_online    = palmtx_is_ac_online,
-	.is_usb_online   = palmtx_is_usb_online,
 	.exit            = power_supply_exit,
 	.supplied_to     = palmtx_supplicants,
 	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
@@ -410,12 +485,23 @@ static void __init palmtx_map_io(void)
 	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
 }
 
+/* setup udc GPIOs initial state */
+static void __init palmtx_udc_init(void)
+{
+	if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
+		gpio_free(GPIO_NR_PALMTX_USB_POWER);
+	}
+}
+
+
 static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
+	palmtx_udc_init();
 	pxa_set_udc_info(&palmtx_udc_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index d2d2847f1e23..34841c72815f 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -387,6 +387,7 @@ static struct soc_camera_link iclink[] = {
 		.gpio	= NR_BUILTIN_GPIO + 1,
 	}, {
 		.bus_id	= 0, /* Must match with the camera ID above */
+		.gpio	= -ENXIO,
 	}
 };
 
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index 74e2ead8cee8..3ca7ffc6904b 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -173,7 +173,7 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
 		return ERR_PTR(-ENOMEM);
 	}
 
-	pwm->clk = clk_get(&pdev->dev, "PWMCLK");
+	pwm->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(pwm->clk)) {
 		ret = PTR_ERR(pwm->clk);
 		goto err_free;
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 265b8a5657b7..6c57522e2469 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -161,36 +161,51 @@ static const struct clkops clk_pxa25x_gpio11_ops = {
  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
  * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
  */
-static struct clk pxa25x_hwuart_clk =
-	INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev)
-;
+static DEFINE_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
+
+static struct clk_lookup pxa25x_hwuart_clkreg =
+	INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
 
 /*
  * PXA 2xx clock declarations.
  */
-static struct clk pxa25x_clks[] = {
-	INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
-	INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev),
-	INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
-	INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
-	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
-	INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL),
-	INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
-	INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
-	INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
-
-	INIT_CKEN("SSPCLK",  SSP, 3686400, 0, &pxa25x_device_ssp.dev),
-	INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev),
-	INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev),
-	INIT_CKEN("PWMCLK", PWM0, 3686400, 0, &pxa25x_device_pwm0.dev),
-	INIT_CKEN("PWMCLK", PWM1, 3686400, 0, &pxa25x_device_pwm1.dev),
-
-	INIT_CKEN("AC97CLK",     AC97,     24576000, 0, NULL),
-
-	/*
-	INIT_CKEN("I2SCLK",  I2S,  14745600, 0, NULL),
-	*/
-	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
+static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops);
+static DEFINE_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
+static DEFINE_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
+static DEFINE_CKEN(pxa25x_stuart, STUART, 14745600, 1);
+static DEFINE_CKEN(pxa25x_usb, USB, 47923000, 5);
+static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0);
+static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0);
+static DEFINE_CKEN(pxa25x_mmc, MMC, 19169000, 0);
+static DEFINE_CKEN(pxa25x_i2c, I2C, 31949000, 0);
+static DEFINE_CKEN(pxa25x_ssp, SSP, 3686400, 0);
+static DEFINE_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
+static DEFINE_CKEN(pxa25x_assp, ASSP, 3686400, 0);
+static DEFINE_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
+static DEFINE_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
+static DEFINE_CKEN(pxa25x_ac97, AC97, 24576000, 0);
+static DEFINE_CKEN(pxa25x_i2s, I2S, 14745600, 0);
+static DEFINE_CKEN(pxa25x_ficp, FICP, 47923000, 0);
+
+static struct clk_lookup pxa25x_clkregs[] = {
+	INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL),
+	INIT_CLKREG(&clk_pxa25x_ffuart, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_pxa25x_btuart, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_pxa25x_usb, "pxa25x-udc", NULL),
+	INIT_CLKREG(&clk_pxa25x_mmc, "pxa2xx-mci.0", NULL),
+	INIT_CLKREG(&clk_pxa25x_i2c, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_pxa25x_ssp, "pxa25x-ssp.0", NULL),
+	INIT_CLKREG(&clk_pxa25x_nssp, "pxa25x-nssp.1", NULL),
+	INIT_CLKREG(&clk_pxa25x_assp, "pxa25x-nssp.2", NULL),
+	INIT_CLKREG(&clk_pxa25x_pwm0, "pxa25x-pwm.0", NULL),
+	INIT_CLKREG(&clk_pxa25x_pwm1, "pxa25x-pwm.1", NULL),
+	INIT_CLKREG(&clk_pxa25x_i2s, "pxa2xx-i2s", NULL),
+	INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-ir", "UARTCLK"),
+	INIT_CLKREG(&clk_pxa25x_ficp, "pxa2xx-ir", "FICPCLK"),
+	INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"),
+	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
+	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 };
 
 #ifdef CONFIG_PM
@@ -338,7 +353,7 @@ static int __init pxa25x_init(void)
 
 		reset_status = RCSR;
 
-		clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
+		clks_register(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
 
 		if ((ret = pxa_init_dma(16)))
 			return ret;
@@ -359,7 +374,7 @@ static int __init pxa25x_init(void)
 
 	/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
 	if (cpu_is_pxa255()) {
-		clks_register(&pxa25x_hwuart_clk, 1);
+		clks_register(&pxa25x_hwuart_clkreg, 1);
 		ret = platform_device_register(&pxa_device_hwuart);
 	}
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 9fdef7641c2f..411bec54fdc4 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -144,40 +144,59 @@ static const struct clkops clk_pxa27x_lcd_ops = {
 	.getrate	= clk_pxa27x_lcd_getrate,
 };
 
-static struct clk pxa27x_clks[] = {
-	INIT_CK("LCDCLK", LCD,    &clk_pxa27x_lcd_ops, &pxa_device_fb.dev),
-	INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_ops, NULL),
-
-	INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
-	INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
-	INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
-
-	INIT_CKEN("I2SCLK",  I2S,  14682000, 0, &pxa_device_i2s.dev),
-	INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
-	INIT_CKEN("UDCCLK",  USB,  48000000, 5, &pxa27x_device_udc.dev),
-	INIT_CKEN("MMCCLK",  MMC,  19500000, 0, &pxa_device_mci.dev),
-	INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),
-
-	INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev),
-	INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
-	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev),
-
-	INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
-	INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
-	INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
-	INIT_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev),
-	INIT_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev),
-
-	INIT_CKEN("AC97CLK",     AC97,     24576000, 0, NULL),
-	INIT_CKEN("AC97CONFCLK", AC97CONF, 24576000, 0, NULL),
-
-	/*
-	INIT_CKEN("MSLCLK",  MSL,  48000000, 0, NULL),
-	INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
-	INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
-	INIT_CKEN("IMCLK",   IM,   0, 0, NULL),
-	INIT_CKEN("MEMCLK",  MEMC, 0, 0, NULL),
-	*/
+static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops);
+static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops);
+static DEFINE_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
+static DEFINE_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
+static DEFINE_CKEN(pxa27x_stuart, STUART, 14857000, 1);
+static DEFINE_CKEN(pxa27x_i2s, I2S, 14682000, 0);
+static DEFINE_CKEN(pxa27x_i2c, I2C, 32842000, 0);
+static DEFINE_CKEN(pxa27x_usb, USB, 48000000, 5);
+static DEFINE_CKEN(pxa27x_mmc, MMC, 19500000, 0);
+static DEFINE_CKEN(pxa27x_ficp, FICP, 48000000, 0);
+static DEFINE_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
+static DEFINE_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
+static DEFINE_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
+static DEFINE_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
+static DEFINE_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
+static DEFINE_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
+static DEFINE_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
+static DEFINE_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
+static DEFINE_CKEN(pxa27x_ac97, AC97, 24576000, 0);
+static DEFINE_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
+static DEFINE_CKEN(pxa27x_msl, MSL, 48000000, 0);
+static DEFINE_CKEN(pxa27x_usim, USIM, 48000000, 0);
+static DEFINE_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
+static DEFINE_CKEN(pxa27x_im, IM, 0, 0);
+static DEFINE_CKEN(pxa27x_memc, MEMC, 0, 0);
+
+static struct clk_lookup pxa27x_clkregs[] = {
+	INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL),
+	INIT_CLKREG(&clk_pxa27x_camera, "pxa27x-camera.0", NULL),
+	INIT_CLKREG(&clk_pxa27x_ffuart, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_pxa27x_btuart, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_pxa27x_i2s, "pxa2xx-i2s", NULL),
+	INIT_CLKREG(&clk_pxa27x_i2c, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_pxa27x_usb, "pxa27x-udc", NULL),
+	INIT_CLKREG(&clk_pxa27x_mmc, "pxa2xx-mci.0", NULL),
+	INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-ir", "UARTCLK"),
+	INIT_CLKREG(&clk_pxa27x_ficp, "pxa2xx-ir", "FICPCLK"),
+	INIT_CLKREG(&clk_pxa27x_usbhost, "pxa27x-ohci", NULL),
+	INIT_CLKREG(&clk_pxa27x_pwri2c, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pxa27x_keypad, "pxa27x-keypad", NULL),
+	INIT_CLKREG(&clk_pxa27x_ssp1, "pxa27x-ssp.0", NULL),
+	INIT_CLKREG(&clk_pxa27x_ssp2, "pxa27x-ssp.1", NULL),
+	INIT_CLKREG(&clk_pxa27x_ssp3, "pxa27x-ssp.2", NULL),
+	INIT_CLKREG(&clk_pxa27x_pwm0, "pxa27x-pwm.0", NULL),
+	INIT_CLKREG(&clk_pxa27x_pwm1, "pxa27x-pwm.1", NULL),
+	INIT_CLKREG(&clk_pxa27x_ac97, NULL, "AC97CLK"),
+	INIT_CLKREG(&clk_pxa27x_ac97conf, NULL, "AC97CONFCLK"),
+	INIT_CLKREG(&clk_pxa27x_msl, NULL, "MSLCLK"),
+	INIT_CLKREG(&clk_pxa27x_usim, NULL, "USIMCLK"),
+	INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"),
+	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
+	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 };
 
 #ifdef CONFIG_PM
@@ -360,7 +379,7 @@ static int __init pxa27x_init(void)
 
 		reset_status = RCSR;
 
-		clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));
+		clks_register(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
 
 		if ((ret = pxa_init_dma(32)))
 			return ret;
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 9adc7fc4618a..f735e58e6669 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -85,14 +85,16 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
-static struct clk common_clks[] = {
-	PXA3xx_CKEN("NANDCLK", NAND, 156000000, 0, &pxa3xx_device_nand.dev),
+static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
+
+static struct clk_lookup common_clkregs[] = {
+	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", "NANDCLK"),
 };
 
-static struct clk pxa310_clks[] = {
-#ifdef CONFIG_CPU_PXA310
-	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
-#endif
+static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
+
+static struct clk_lookup pxa310_clkregs[] = {
+	INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", "MMCCLK"),
 };
 
 static int __init pxa300_init(void)
@@ -100,12 +102,12 @@ static int __init pxa300_init(void)
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
 		pxa3xx_init_mfp();
 		pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
-		clks_register(ARRAY_AND_SIZE(common_clks));
+		clks_register(ARRAY_AND_SIZE(common_clkregs));
 	}
 
 	if (cpu_is_pxa310()) {
 		pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
-		clks_register(ARRAY_AND_SIZE(pxa310_clks));
+		clks_register(ARRAY_AND_SIZE(pxa310_clkregs));
 	}
 
 	return 0;
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 016eb18f01a3..effe408c186f 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -80,8 +80,10 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
-static struct clk pxa320_clks[] = {
-	PXA3xx_CKEN("NANDCLK", NAND, 104000000, 0, &pxa3xx_device_nand.dev),
+static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
+
+static struct clk_lookup pxa320_clkregs[] = {
+	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", "NANDCLK"),
 };
 
 static int __init pxa320_init(void)
@@ -89,7 +91,7 @@ static int __init pxa320_init(void)
 	if (cpu_is_pxa320()) {
 		pxa3xx_init_mfp();
 		pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
-		clks_register(ARRAY_AND_SIZE(pxa320_clks));
+		clks_register(ARRAY_AND_SIZE(pxa320_clkregs));
 	}
 
 	return 0;
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 041b8abb9e1a..490893824e78 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -217,43 +217,58 @@ static const struct clkops clk_dummy_ops = {
 	.disable	= clk_dummy_disable,
 };
 
-static struct clk pxa3xx_clks[] = {
-	{
-		.name           = "CLK_POUT",
-		.ops            = &clk_pout_ops,
-		.rate           = 13000000,
-		.delay          = 70,
-	},
-
-	/* Power I2C clock is always on */
-	{
-		.name		= "I2CCLK",
-		.ops		= &clk_dummy_ops,
-		.dev		= &pxa3xx_device_i2c_power.dev,
-	},
-
-	PXA3xx_CK("LCDCLK",  LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
-	PXA3xx_CK("CAMCLK",  CAMERA, &clk_pxa3xx_hsio_ops, NULL),
-	PXA3xx_CK("AC97CLK", AC97,   &clk_pxa3xx_ac97_ops, NULL),
-
-	PXA3xx_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
-	PXA3xx_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
-	PXA3xx_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
-
-	PXA3xx_CKEN("I2CCLK", I2C,  32842000, 0, &pxa_device_i2c.dev),
-	PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa27x_device_udc.dev),
-	PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev),
-	PXA3xx_CKEN("KBDCLK", KEYPAD,  32768, 0, &pxa27x_device_keypad.dev),
+static struct clk clk_pxa3xx_pout = {
+	.ops		= &clk_pout_ops,
+	.rate		= 13000000,
+	.delay		= 70,
+};
 
-	PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
-	PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
-	PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
-	PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev),
-	PXA3xx_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev),
-	PXA3xx_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev),
+static struct clk clk_dummy = {
+	.ops		= &clk_dummy_ops,
+};
 
-	PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
-	PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
+static DEFINE_PXA3_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
+static DEFINE_PXA3_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
+static DEFINE_PXA3_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
+static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5);
+static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_ssp3, SSP3, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_ssp4, SSP4, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
+
+static struct clk_lookup pxa3xx_clkregs[] = {
+	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
+	/* Power I2C clock is always on */
+	INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
+	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
+	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
+	INIT_CLKREG(&clk_pxa3xx_ffuart, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_pxa3xx_btuart, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-ir", "UARTCLK"),
+	INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
+	INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
+	INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
+	INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
+	INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
+	INIT_CLKREG(&clk_pxa3xx_ssp3, "pxa27x-ssp.2", NULL),
+	INIT_CLKREG(&clk_pxa3xx_ssp4, "pxa27x-ssp.3", NULL),
+	INIT_CLKREG(&clk_pxa3xx_pwm0, "pxa27x-pwm.0", NULL),
+	INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL),
+	INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
+	INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -577,7 +592,7 @@ static int __init pxa3xx_init(void)
 		 */
 		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
 
-		clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks));
+		clks_register(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
 
 		if ((ret = pxa_init_dma(32)))
 			return ret;
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index ad346addc028..d6f6904132a6 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -8,6 +8,8 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
+#include <mach/hardware.h>
+
 #define SMEMC_PHYS_BASE	(0x4A000000)
 #define SMEMC_PHYS_SIZE	(0x90)
 
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 2c31ec725688..6f42004db3ed 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -356,7 +356,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
 	}
 	ssp->pdev = pdev;
 
-	ssp->clk = clk_get(&pdev->dev, "SSPCLK");
+	ssp->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(ssp->clk)) {
 		ret = PTR_ERR(ssp->clk);
 		goto err_free;
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index f8a9a62959e5..ef4ddf9d5040 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -22,6 +22,7 @@
 #include <asm/div64.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <mach/hardware.h>
 #include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 5ccde7cf39e8..ad911854eb4c 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -7,9 +7,17 @@ config MACH_REALVIEW_EB
 	help
 	  Include support for the ARM(R) RealView Emulation Baseboard platform.
 
+config REALVIEW_EB_A9MP
+	bool "Support Multicore Cortex-A9"
+	depends on MACH_REALVIEW_EB
+	select CPU_V7
+	help
+	  Enable support for the Cortex-A9MPCore tile on the Realview platform.
+
 config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore tile"
 	depends on MACH_REALVIEW_EB
+	select CPU_V6
 	help
 	  Enable support for the ARM11MPCore tile on the Realview platform.
 
@@ -25,6 +33,7 @@ config REALVIEW_EB_ARM11MP_REVB
 
 config MACH_REALVIEW_PB11MP
 	bool "Support RealView/PB11MPCore platform"
+	select CPU_V6
 	select ARM_GIC
 	help
 	  Include support for the ARM(R) RealView MPCore Platform Baseboard.
@@ -33,8 +42,29 @@ config MACH_REALVIEW_PB11MP
 
 config MACH_REALVIEW_PB1176
 	bool "Support RealView/PB1176 platform"
+	select CPU_V6
 	select ARM_GIC
 	help
 	  Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
 
+config MACH_REALVIEW_PBA8
+	bool "Support RealView/PB-A8 platform"
+	select CPU_V7
+	select ARM_GIC
+	help
+	  Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard.
+	  PB-A8 is a platform with an on-board Cortex-A8 and has support for
+	  PCI-E and Compact Flash.
+
+config REALVIEW_HIGH_PHYS_OFFSET
+	bool "High physical base address for the RealView platform"
+	depends on !MACH_REALVIEW_PB1176
+	default y
+	help
+	  RealView boards other than PB1176 have the RAM available at
+	  0x70000000, 256MB of which being mirrored at 0x00000000. If
+	  the board supports 512MB of RAM, this option allows the
+	  memory to be accessed contiguously at the high physical
+	  offset.
+
 endmenu
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index d2ae077431dd..7bea8ffc4b59 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -6,5 +6,6 @@ obj-y					:= core.o clock.o
 obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
+obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o localtimer.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot
index c7e75acfe6c9..d97e003d3df4 100644
--- a/arch/arm/mach-realview/Makefile.boot
+++ b/arch/arm/mach-realview/Makefile.boot
@@ -1,4 +1,9 @@
+ifeq ($(CONFIG_REALVIEW_HIGH_PHYS_OFFSET),y)
+   zreladdr-y	:= 0x70008000
+params_phys-y	:= 0x70000100
+initrd_phys-y	:= 0x70800000
+else
    zreladdr-y	:= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
-
+endif
diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c
index 3347c4236a60..a7043115de72 100644
--- a/arch/arm/mach-realview/clock.c
+++ b/arch/arm/mach-realview/clock.c
@@ -10,9 +10,11 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/device.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/string.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
 
@@ -20,32 +22,6 @@
 
 #include "clock.h"
 
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
 int clk_enable(struct clk *clk)
 {
 	return 0;
@@ -65,7 +41,9 @@ EXPORT_SYMBOL(clk_get_rate);
 
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	return rate;
+	struct icst307_vco vco;
+	vco = icst307_khz_to_vco(clk->params, rate / 1000);
+	return icst307_khz(clk->params, vco) * 1000;
 }
 EXPORT_SYMBOL(clk_round_rate);
 
@@ -78,57 +56,9 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 
 		vco = icst307_khz_to_vco(clk->params, rate / 1000);
 		clk->rate = icst307_khz(clk->params, vco) * 1000;
-
-		printk("Clock %s: setting VCO reg params: S=%d R=%d V=%d\n",
-			clk->name, vco.s, vco.r, vco.v);
-
 		clk->setvco(clk, vco);
 		ret = 0;
 	}
 	return ret;
 }
 EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * These are fixed clocks.
- */
-static struct clk kmi_clk = {
-	.name	= "KMIREFCLK",
-	.rate	= 24000000,
-};
-
-static struct clk uart_clk = {
-	.name	= "UARTCLK",
-	.rate	= 24000000,
-};
-
-static struct clk mmci_clk = {
-	.name	= "MCLK",
-	.rate	= 24000000,
-};
-
-int clk_register(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-static int __init clk_init(void)
-{
-	clk_register(&kmi_clk);
-	clk_register(&uart_clk);
-	clk_register(&mmci_clk);
-	return 0;
-}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-realview/clock.h b/arch/arm/mach-realview/clock.h
index dadba695e181..ebbb0f06b600 100644
--- a/arch/arm/mach-realview/clock.h
+++ b/arch/arm/mach-realview/clock.h
@@ -12,14 +12,8 @@ struct module;
 struct icst307_params;
 
 struct clk {
-	struct list_head	node;
 	unsigned long		rate;
-	struct module		*owner;
-	const char		*name;
 	const struct icst307_params *params;
 	void			*data;
 	void			(*setvco)(struct clk *, struct icst307_vco vco);
 };
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 2f04d54711e7..5f1d55963ced 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -28,11 +28,14 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/smc911x.h>
 
+#include <asm/clkdev.h>
 #include <asm/system.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
+#include <asm/mach-types.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst307.h>
 
@@ -49,7 +52,7 @@
 
 #define REALVIEW_REFCOUNTER	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
 
-/* used by entry-macro.S */
+/* used by entry-macro.S and platsmp.c */
 void __iomem *gic_cpu_base_addr;
 
 /*
@@ -124,6 +127,29 @@ int realview_flash_register(struct resource *res, u32 num)
 	return platform_device_register(&realview_flash_device);
 }
 
+static struct smc911x_platdata realview_smc911x_platdata = {
+	.flags		= SMC911X_USE_32BIT,
+	.irq_flags	= IRQF_SHARED,
+	.irq_polarity	= 1,
+};
+
+static struct platform_device realview_eth_device = {
+	.name		= "smc911x",
+	.id		= 0,
+	.num_resources	= 2,
+};
+
+int realview_eth_register(const char *name, struct resource *res)
+{
+	if (name)
+		realview_eth_device.name = name;
+	realview_eth_device.resource = res;
+	if (strcmp(realview_eth_device.name, "smc911x") == 0)
+		realview_eth_device.dev.platform_data = &realview_smc911x_platdata;
+
+	return platform_device_register(&realview_eth_device);
+}
+
 static struct resource realview_i2c_resource = {
 	.start		= REALVIEW_I2C_BASE,
 	.end		= REALVIEW_I2C_BASE + SZ_4K - 1,
@@ -177,9 +203,14 @@ static const struct icst307_params realview_oscvco_params = {
 static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
 {
 	void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
-	void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
+	void __iomem *sys_osc;
 	u32 val;
 
+	if (machine_is_realview_pb1176())
+		sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
+	else
+		sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
+
 	val = readl(sys_osc) & ~0x7ffff;
 	val |= vco.v | (vco.r << 9) | (vco.s << 16);
 
@@ -188,13 +219,60 @@ static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
 	writel(0, sys_lock);
 }
 
-struct clk realview_clcd_clk = {
-	.name	= "CLCDCLK",
+static struct clk oscvco_clk = {
 	.params	= &realview_oscvco_params,
 	.setvco = realview_oscvco_set,
 };
 
 /*
+ * These are fixed clocks.
+ */
+static struct clk ref24_clk = {
+	.rate	= 24000000,
+};
+
+static struct clk_lookup lookups[] = {
+	{	/* UART0 */
+		.dev_id		= "dev:f1",
+		.clk		= &ref24_clk,
+	}, {	/* UART1 */
+		.dev_id		= "dev:f2",
+		.clk		= &ref24_clk,
+	}, {	/* UART2 */
+		.dev_id		= "dev:f3",
+		.clk		= &ref24_clk,
+	}, {	/* UART3 */
+		.dev_id		= "fpga:09",
+		.clk		= &ref24_clk,
+	}, {	/* KMI0 */
+		.dev_id		= "fpga:06",
+		.clk		= &ref24_clk,
+	}, {	/* KMI1 */
+		.dev_id		= "fpga:07",
+		.clk		= &ref24_clk,
+	}, {	/* MMC0 */
+		.dev_id		= "fpga:05",
+		.clk		= &ref24_clk,
+	}, {	/* EB:CLCD */
+		.dev_id		= "dev:20",
+		.clk		= &oscvco_clk,
+	}, {	/* PB:CLCD */
+		.dev_id		= "issp:20",
+		.clk		= &oscvco_clk,
+	}
+};
+
+static int __init clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+	return 0;
+}
+arch_initcall(clk_init);
+
+/*
  * CLCD support.
  */
 #define SYS_CLCD_NLCDIOON	(1 << 2)
@@ -226,7 +304,30 @@ static struct clcd_panel vga = {
 	.width		= -1,
 	.height		= -1,
 	.tim2		= TIM2_BCD | TIM2_IPC,
-	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+static struct clcd_panel xvga = {
+	.mode		= {
+		.name		= "XVGA",
+		.refresh	= 60,
+		.xres		= 1024,
+		.yres		= 768,
+		.pixclock	= 15748,
+		.left_margin	= 152,
+		.right_margin	= 48,
+		.upper_margin	= 23,
+		.lower_margin	= 3,
+		.hsync_len	= 104,
+		.vsync_len	= 4,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 	.bpp		= 16,
 };
 
@@ -249,7 +350,7 @@ static struct clcd_panel sanyo_3_8_in = {
 	.width		= -1,
 	.height		= -1,
 	.tim2		= TIM2_BCD,
-	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 	.bpp		= 16,
 };
 
@@ -272,7 +373,7 @@ static struct clcd_panel sanyo_2_5_in = {
 	.width		= -1,
 	.height		= -1,
 	.tim2		= TIM2_IVS | TIM2_IHS | TIM2_IPC,
-	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 	.bpp		= 16,
 };
 
@@ -295,7 +396,7 @@ static struct clcd_panel epson_2_2_in = {
 	.width		= -1,
 	.height		= -1,
 	.tim2		= TIM2_BCD | TIM2_IPC,
-	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 	.bpp		= 16,
 };
 
@@ -308,9 +409,15 @@ static struct clcd_panel epson_2_2_in = {
 static struct clcd_panel *realview_clcd_panel(void)
 {
 	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	struct clcd_panel *panel = &vga;
+	struct clcd_panel *vga_panel;
+	struct clcd_panel *panel;
 	u32 val;
 
+	if (machine_is_realview_eb())
+		vga_panel = &vga;
+	else
+		vga_panel = &xvga;
+
 	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
 	if (val == SYS_CLCD_ID_SANYO_3_8)
 		panel = &sanyo_3_8_in;
@@ -319,11 +426,11 @@ static struct clcd_panel *realview_clcd_panel(void)
 	else if (val == SYS_CLCD_ID_EPSON_2_2)
 		panel = &epson_2_2_in;
 	else if (val == SYS_CLCD_ID_VGA)
-		panel = &vga;
+		panel = vga_panel;
 	else {
 		printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
 			val);
-		panel = &vga;
+		panel = vga_panel;
 	}
 
 	return panel;
@@ -358,12 +465,18 @@ static void realview_clcd_enable(struct clcd_fb *fb)
 	writel(val, sys_clcd);
 }
 
-static unsigned long framesize = SZ_1M;
-
 static int realview_clcd_setup(struct clcd_fb *fb)
 {
+	unsigned long framesize;
 	dma_addr_t dma;
 
+	if (machine_is_realview_eb())
+		/* VGA, 16bpp */
+		framesize = 640 * 480 * 2;
+	else
+		/* XVGA, 16bpp */
+		framesize = 1024 * 768 * 2;
+
 	fb->panel		= realview_clcd_panel();
 
 	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
@@ -588,7 +701,7 @@ void __init realview_timer_init(unsigned int timer_irq)
 	 * The dummy clock device has to be registered before the main device
 	 * so that the latter will broadcast the clock events
 	 */
-	local_timer_setup(smp_processor_id());
+	local_timer_setup();
 #endif
 
 	/* 
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 3cea92c70d8f..63be2abdc19c 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -48,12 +48,10 @@ extern struct platform_device realview_flash_device;
 extern struct platform_device realview_i2c_device;
 extern struct mmc_platform_data realview_mmc0_plat_data;
 extern struct mmc_platform_data realview_mmc1_plat_data;
-extern struct clk realview_clcd_clk;
 extern struct clcd_board clcd_plat_data;
 extern void __iomem *gic_cpu_base_addr;
 #ifdef CONFIG_LOCAL_TIMERS
-extern void __iomem *twd_base_addr;
-extern unsigned int twd_size;
+extern void __iomem *twd_base;
 #endif
 extern void __iomem *timer0_va_base;
 extern void __iomem *timer1_va_base;
@@ -63,5 +61,6 @@ extern void __iomem *timer3_va_base;
 extern void realview_leds_event(led_event_t ledevt);
 extern void realview_timer_init(unsigned int timer_irq);
 extern int realview_flash_register(struct resource *res, u32 num);
+extern int realview_eth_register(const char *name, struct resource *res);
 
 #endif
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index 09748cbcd10e..be048e3e8799 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -13,6 +13,8 @@
 #include <linux/smp.h>
 #include <linux/completion.h>
 
+#include <asm/cacheflush.h>
+
 extern volatile int pen_release;
 
 static DECLARE_COMPLETION(cpu_killed);
@@ -21,7 +23,8 @@ static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
 
-	asm volatile(	"mcr	p15, 0, %1, c7, c14, 0\n"
+	flush_cache_all();
+	asm volatile(
 	"	mcr	p15, 0, %1, c7, c5, 0\n"
 	"	mcr	p15, 0, %1, c7, c10, 4\n"
 	/*
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
index 8d699fd324d0..268d7701fa9b 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -49,16 +49,14 @@
 #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
 #define REALVIEW_EB11MP_SCU_BASE	0x10100000	/* SCU registers */
 #define REALVIEW_EB11MP_GIC_CPU_BASE	0x10100100	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	0x10100700
-#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
+#define REALVIEW_EB11MP_TWD_BASE	0x10100600
 #define REALVIEW_EB11MP_GIC_DIST_BASE	0x10101000	/* Generic interrupt controller distributor */
 #define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
 #else
 #define REALVIEW_EB11MP_SCU_BASE	0x1F000000	/* SCU registers */
 #define REALVIEW_EB11MP_GIC_CPU_BASE	0x1F000100	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	0x1F000700
-#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
+#define REALVIEW_EB11MP_TWD_BASE	0x1F000600
 #define REALVIEW_EB11MP_GIC_DIST_BASE	0x1F001000	/* Generic interrupt controller distributor */
 #define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
@@ -163,7 +161,7 @@
 #define NR_IRQS			NR_IRQS_EB
 #endif
 
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
 	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
 #undef MAX_GIC_NR
 #define MAX_GIC_NR		NR_GIC_EB11MP
@@ -177,6 +175,7 @@
 #define REALVIEW_EB_PROC_ARM9		0x02000000
 #define REALVIEW_EB_PROC_ARM11		0x04000000
 #define REALVIEW_EB_PROC_ARM11MP	0x06000000
+#define REALVIEW_EB_PROC_A9MP		0x0C000000
 
 #define check_eb_proc(proc_type)						\
 	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)	\
@@ -188,4 +187,13 @@
 #define core_tile_eb11mp()	0
 #endif
 
+#ifdef CONFIG_REALVIEW_EB_A9MP
+#define core_tile_a9mp()	check_eb_proc(REALVIEW_EB_PROC_A9MP)
+#else
+#define core_tile_a9mp()	0
+#endif
+
+#define machine_is_realview_eb_mp() \
+	(machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp()))
+
 #endif	/* __ASM_ARCH_BOARD_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index ecd80e58631e..53ea0e7a1267 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -77,8 +77,7 @@
  */
 #define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
 #define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
-#define REALVIEW_TC11MP_TWD_BASE		0x1F000700
-#define REALVIEW_TC11MP_TWD_SIZE		0x00000100
+#define REALVIEW_TC11MP_TWD_BASE		0x1F000600
 #define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
 #define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
 
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
new file mode 100644
index 000000000000..c8bed8f58bab
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -0,0 +1,152 @@
+/*
+ * include/asm-arm/arch-realview/board-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PBA8_H
+#define __ASM_ARCH_BOARD_PBA8_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PBA8_UART0_BASE		0x10009000	/* UART 0 */
+#define REALVIEW_PBA8_UART1_BASE		0x1000A000	/* UART 1 */
+#define REALVIEW_PBA8_UART2_BASE		0x1000B000	/* UART 2 */
+#define REALVIEW_PBA8_UART3_BASE		0x1000C000	/* UART 3 */
+#define REALVIEW_PBA8_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_PBA8_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
+#define REALVIEW_PBA8_WATCHDOG_BASE		0x10010000	/* watchdog interface */
+#define REALVIEW_PBA8_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_PBA8_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_PBA8_GPIO0_BASE		0x10013000	/* GPIO port 0 */
+#define REALVIEW_PBA8_RTC_BASE			0x10017000	/* Real Time Clock */
+#define REALVIEW_PBA8_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
+#define REALVIEW_PBA8_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
+#define REALVIEW_PBA8_SCTL_BASE			0x1001A000	/* System Controller */
+#define REALVIEW_PBA8_CLCD_BASE			0x10020000	/* CLCD */
+#define REALVIEW_PBA8_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
+#define REALVIEW_PBA8_DMC_BASE			0x100E0000	/* DMC configuration */
+#define REALVIEW_PBA8_SMC_BASE			0x100E1000	/* SMC configuration */
+#define REALVIEW_PBA8_CAN_BASE			0x100E2000	/* CAN bus */
+#define REALVIEW_PBA8_CF_BASE			0x18000000	/* Compact flash */
+#define REALVIEW_PBA8_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
+#define REALVIEW_PBA8_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_PBA8_FLASH0_BASE		0x40000000
+#define REALVIEW_PBA8_FLASH0_SIZE		SZ_64M
+#define REALVIEW_PBA8_FLASH1_BASE		0x44000000
+#define REALVIEW_PBA8_FLASH1_SIZE		SZ_64M
+#define REALVIEW_PBA8_ETH_BASE			0x4E000000	/* Ethernet */
+#define REALVIEW_PBA8_USB_BASE			0x4F000000	/* USB */
+#define REALVIEW_PBA8_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
+#define REALVIEW_PBA8_LT_BASE			0xC0000000	/* Logic Tile expansion */
+#define REALVIEW_PBA8_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
+#define REALVIEW_PBA8_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
+
+#define REALVIEW_PBA8_SYS_PLD_CTRL1		0x74
+
+/*
+ * PBA8 PCI regions
+ */
+#define REALVIEW_PBA8_PCI_BASE			0x90040000	/* PCI-X Unit base */
+#define REALVIEW_PBA8_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
+#define REALVIEW_PBA8_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
+
+#define REALVIEW_PBA8_PCI_BASE_SIZE		0x10000		/* 16 Kb */
+#define REALVIEW_PBA8_PCI_IO_SIZE		0x1000		/* 4 Kb */
+#define REALVIEW_PBA8_PCI_MEM_SIZE		0x20000000	/* 512 MB */
+
+/*
+ * Irqs
+ */
+#define IRQ_PBA8_GIC_START			32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
+#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
+#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
+#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
+#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
+#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC		-1
+#define IRQ_PBA8_SCTL		-1
+
+#define NR_GIC_PBA8		1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PBA8
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif	/* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 7196bcadff0c..92dbcb9e1792 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -8,15 +8,36 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
-*/
+ */
+
+#if defined(CONFIG_MACH_REALVIEW_EB) || \
+    defined(CONFIG_MACH_REALVIEW_PB11MP) || \
+    defined(CONFIG_MACH_REALVIEW_PBA8)
+#ifndef DEBUG_LL_UART_OFFSET
+#define DEBUG_LL_UART_OFFSET	0x00009000
+#elif DEBUG_LL_UART_OFFSET != 0x00009000
+#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
+#endif
+#endif
+
+#ifdef CONFIG_MACH_REALVIEW_PB1176
+#ifndef DEBUG_LL_UART_OFFSET
+#define DEBUG_LL_UART_OFFSET	0x0010c000
+#elif DEBUG_LL_UART_OFFSET != 0x0010c000
+#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
+#endif
+#endif
+
+#ifndef DEBUG_LL_UART_OFFSET
+#error "Unknown RealView platform"
+#endif
 
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf0000000	@ virtual base
-		orr	\rx, \rx, #0x00009000
+		movne	\rx,      #0xfb000000	@ virtual base
+		orr	\rx, \rx, #DEBUG_LL_UART_OFFSET
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-realview/include/mach/dma.h b/arch/arm/mach-realview/include/mach/dma.h
deleted file mode 100644
index f1a5a1a10952..000000000000
--- a/arch/arm/mach-realview/include/mach/dma.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/dma.h
- *
- *  Copyright (C) 2003 ARM Limited.
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
index 79a93b3dfca9..b42c14f89acb 100644
--- a/arch/arm/mach-realview/include/mach/hardware.h
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -25,7 +25,14 @@
 #include <asm/sizes.h>
 
 /* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + 0xf0000000)
+/*
+ * Statically mapped addresses:
+ *
+ * 10xx xxxx -> fbxx xxxx
+ * 1exx xxxx -> fdxx xxxx
+ * 1fxx xxxx -> fexx xxxx
+ */
+#define IO_ADDRESS(x)		(((x) & 0x03ffffff) + 0xfb000000)
 #define __io_address(n)		__io(IO_ADDRESS(n))
 
 #endif
diff --git a/arch/arm/mach-realview/include/mach/io.h b/arch/arm/mach-realview/include/mach/io.h
index aa069424d310..f05bcdf605d8 100644
--- a/arch/arm/mach-realview/include/mach/io.h
+++ b/arch/arm/mach-realview/include/mach/io.h
@@ -22,12 +22,7 @@
 
 #define IO_SPACE_LIMIT 0xffffffff
 
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
index 02a918529db3..fe5cb987aa21 100644
--- a/arch/arm/mach-realview/include/mach/irqs.h
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -25,6 +25,7 @@
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
 #include <mach/board-pb1176.h>
+#include <mach/board-pba8.h>
 
 #define IRQ_LOCALTIMER		29
 #define IRQ_LOCALWDOG		30
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 0e673483a141..293c30025e7e 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -23,16 +23,10 @@
 /*
  * Physical DRAM offset.
  */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+#define PHYS_OFFSET		UL(0x70000000)
+#else
 #define PHYS_OFFSET		UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+#endif
 
 #endif
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
index 79f50f218e77..415d634d52ab 100644
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -23,6 +23,7 @@
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
 #include <mach/board-pb1176.h>
+#include <mach/board-pba8.h>
 
 #define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
 #define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
@@ -40,6 +41,8 @@ static inline unsigned long get_uart_base(void)
 		return REALVIEW_PB11MP_UART0_BASE;
 	else if (machine_is_realview_pb1176())
 		return REALVIEW_PB1176_UART0_BASE;
+	else if (machine_is_realview_pba8())
+		return REALVIEW_PBA8_UART0_BASE;
 	else
 		return 0;
 }
diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
index 48cbcc873db2..fe0de1b507ac 100644
--- a/arch/arm/mach-realview/include/mach/vmalloc.h
+++ b/arch/arm/mach-realview/include/mach/vmalloc.h
@@ -18,4 +18,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
+#define VMALLOC_END		0xf8000000
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 44d178cd5733..9019ef2e5611 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -38,18 +38,14 @@ void local_timer_interrupt(void)
 
 #ifdef CONFIG_LOCAL_TIMERS
 
-#define TWD_BASE(cpu)	(twd_base_addr + (cpu) * twd_size)
-
 /* set up by the platform code */
-void __iomem *twd_base_addr;
-unsigned int twd_size;
+void __iomem *twd_base;
 
 static unsigned long mpcore_timer_rate;
 
 static void local_timer_set_mode(enum clock_event_mode mode,
 				 struct clock_event_device *clk)
 {
-	void __iomem *base = TWD_BASE(smp_processor_id());
 	unsigned long ctrl;
 
 	switch(mode) {
@@ -68,17 +64,16 @@ static void local_timer_set_mode(enum clock_event_mode mode,
 		ctrl = 0;
 	}
 
-	__raw_writel(ctrl, base + TWD_TIMER_CONTROL);
+	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
 }
 
 static int local_timer_set_next_event(unsigned long evt,
 				      struct clock_event_device *unused)
 {
-	void __iomem *base = TWD_BASE(smp_processor_id());
-	unsigned long ctrl = __raw_readl(base + TWD_TIMER_CONTROL);
+	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
 
-	__raw_writel(evt, base + TWD_TIMER_COUNTER);
-	__raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, base + TWD_TIMER_CONTROL);
+	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
+	__raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL);
 
 	return 0;
 }
@@ -91,19 +86,16 @@ static int local_timer_set_next_event(unsigned long evt,
  */
 int local_timer_ack(void)
 {
-	void __iomem *base = TWD_BASE(smp_processor_id());
-
-	if (__raw_readl(base + TWD_TIMER_INTSTAT)) {
-		__raw_writel(1, base + TWD_TIMER_INTSTAT);
+	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
+		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
 		return 1;
 	}
 
 	return 0;
 }
 
-static void __cpuinit twd_calibrate_rate(unsigned int cpu)
+static void __cpuinit twd_calibrate_rate(void)
 {
-	void __iomem *base = TWD_BASE(cpu);
 	unsigned long load, count;
 	u64 waitjiffies;
 
@@ -124,15 +116,15 @@ static void __cpuinit twd_calibrate_rate(unsigned int cpu)
 		waitjiffies += 5;
 
 				 /* enable, no interrupt or reload */
-		__raw_writel(0x1, base + TWD_TIMER_CONTROL);
+		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
 
 				 /* maximum value */
-		__raw_writel(0xFFFFFFFFU, base + TWD_TIMER_COUNTER);
+		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
 
 		while (get_jiffies_64() < waitjiffies)
 			udelay(10);
 
-		count = __raw_readl(base + TWD_TIMER_COUNTER);
+		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
 
 		mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
 
@@ -142,18 +134,19 @@ static void __cpuinit twd_calibrate_rate(unsigned int cpu)
 
 	load = mpcore_timer_rate / HZ;
 
-	__raw_writel(load, base + TWD_TIMER_LOAD);
+	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
 }
 
 /*
  * Setup the local clock events for a CPU.
  */
-void __cpuinit local_timer_setup(unsigned int cpu)
+void __cpuinit local_timer_setup(void)
 {
+	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
 	unsigned long flags;
 
-	twd_calibrate_rate(cpu);
+	twd_calibrate_rate();
 
 	clk->name		= "local_timer";
 	clk->features		= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
@@ -178,9 +171,9 @@ void __cpuinit local_timer_setup(unsigned int cpu)
 /*
  * take a local timer down
  */
-void __cpuexit local_timer_stop(unsigned int cpu)
+void __cpuexit local_timer_stop(void)
 {
-	__raw_writel(0, TWD_BASE(cpu) + TWD_TIMER_CONTROL);
+	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
 }
 
 #else	/* CONFIG_LOCAL_TIMERS */
@@ -190,8 +183,9 @@ static void dummy_timer_set_mode(enum clock_event_mode mode,
 {
 }
 
-void __cpuinit local_timer_setup(unsigned int cpu)
+void __cpuinit local_timer_setup(void)
 {
+	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
 
 	clk->name		= "dummy_timer";
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index e102aeb0f76e..8fce85f33033 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -23,6 +23,8 @@
 #include <mach/board-pb11mp.h>
 #include <mach/scu.h>
 
+#include "core.h"
+
 extern void realview_secondary_startup(void);
 
 /*
@@ -31,15 +33,20 @@ extern void realview_secondary_startup(void);
  */
 volatile int __cpuinitdata pen_release = -1;
 
+static void __iomem *scu_base_addr(void)
+{
+	if (machine_is_realview_eb_mp())
+		return __io_address(REALVIEW_EB11MP_SCU_BASE);
+	else if (machine_is_realview_pb11mp())
+		return __io_address(REALVIEW_TC11MP_SCU_BASE);
+	else
+		return (void __iomem *)0;
+}
+
 static unsigned int __init get_core_count(void)
 {
 	unsigned int ncores;
-	void __iomem *scu_base = 0;
-
-	if (machine_is_realview_eb() && core_tile_eb11mp())
-		scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE);
-	else if (machine_is_realview_pb11mp())
-		scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE);
+	void __iomem *scu_base = scu_base_addr();
 
 	if (scu_base) {
 		ncores = __raw_readl(scu_base + SCU_CONFIG);
@@ -56,14 +63,7 @@ static unsigned int __init get_core_count(void)
 static void scu_enable(void)
 {
 	u32 scu_ctrl;
-	void __iomem *scu_base;
-
-	if (machine_is_realview_eb() && core_tile_eb11mp())
-		scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE);
-	else if (machine_is_realview_pb11mp())
-		scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE);
-	else
-		BUG();
+	void __iomem *scu_base = scu_base_addr();
 
 	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
 	scu_ctrl |= 1;
@@ -88,10 +88,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	if (machine_is_realview_eb() && core_tile_eb11mp())
-		gic_cpu_init(0, __io_address(REALVIEW_EB11MP_GIC_CPU_BASE));
-	else if (machine_is_realview_pb11mp())
-		gic_cpu_init(0, __io_address(REALVIEW_TC11MP_GIC_CPU_BASE));
+	gic_cpu_init(0, gic_cpu_base_addr);
 
 	/*
 	 * let the primary processor know we're out of the
@@ -232,9 +229,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	 * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
 	 * realview_timer_init
 	 */
-	if ((machine_is_realview_eb() && core_tile_eb11mp()) ||
-	    machine_is_realview_pb11mp())
-		local_timer_setup(cpu);
+	local_timer_setup();
 #endif
 
 	/*
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index eb829eb1ebe2..bed39ed97613 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -108,7 +108,7 @@ static struct map_desc realview_eb11mp_io_desc[] __initdata = {
 static void __init realview_eb_map_io(void)
 {
 	iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc));
-	if (core_tile_eb11mp())
+	if (core_tile_eb11mp() || core_tile_a9mp())
 		iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
 }
 
@@ -242,12 +242,6 @@ static struct resource realview_eb_eth_resources[] = {
 	},
 };
 
-static struct platform_device realview_eb_eth_device = {
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(realview_eb_eth_resources),
-	.resource	= realview_eb_eth_resources,
-};
-
 /*
  * Detect and register the correct Ethernet device. RealView/EB rev D
  * platforms use the newer SMSC LAN9118 Ethernet chip
@@ -255,26 +249,24 @@ static struct platform_device realview_eb_eth_device = {
 static int eth_device_register(void)
 {
 	void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K);
+	const char *name = NULL;
 	u32 idrev;
 
 	if (!eth_addr)
 		return -ENOMEM;
 
 	idrev = readl(eth_addr + 0x50);
-	if ((idrev & 0xFFFF0000) == 0x01180000)
-		/* SMSC LAN9118 chip present */
-		realview_eb_eth_device.name = "smc911x";
-	else
-		/* SMSC 91C111 chip present */
-		realview_eb_eth_device.name = "smc91x";
+	if ((idrev & 0xFFFF0000) != 0x01180000)
+		/* SMSC LAN9118 not present, use LAN91C111 instead */
+		name = "smc91x";
 
 	iounmap(eth_addr);
-	return platform_device_register(&realview_eb_eth_device);
+	return realview_eth_register(name, realview_eb_eth_resources);
 }
 
 static void __init gic_init_irq(void)
 {
-	if (core_tile_eb11mp()) {
+	if (core_tile_eb11mp() || core_tile_a9mp()) {
 		unsigned int pldctrl;
 
 		/* new irq mode */
@@ -342,10 +334,9 @@ static void __init realview_eb_timer_init(void)
 	timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE);
 	timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20;
 
-	if (core_tile_eb11mp()) {
+	if (core_tile_eb11mp() || core_tile_a9mp()) {
 #ifdef CONFIG_LOCAL_TIMERS
-		twd_base_addr = __io_address(REALVIEW_EB11MP_TWD_BASE);
-		twd_size = REALVIEW_EB11MP_TWD_SIZE;
+		twd_base = __io_address(REALVIEW_EB11MP_TWD_BASE);
 #endif
 		timer_irq = IRQ_EB11MP_TIMER0_1;
 	} else
@@ -362,7 +353,7 @@ static void __init realview_eb_init(void)
 {
 	int i;
 
-	if (core_tile_eb11mp()) {
+	if (core_tile_eb11mp() || core_tile_a9mp()) {
 		realview_eb11mp_fixup();
 
 #ifdef CONFIG_CACHE_L2X0
@@ -372,8 +363,6 @@ static void __init realview_eb_init(void)
 #endif
 	}
 
-	clk_register(&realview_clcd_clk);
-
 	realview_flash_register(&realview_eb_flash_resource, 1);
 	platform_device_register(&realview_i2c_device);
 	eth_device_register();
@@ -392,7 +381,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.phys_io	= REALVIEW_EB_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= realview_eb_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_eb_timer,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index cccdb3eb90fe..8f0683c22140 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -222,13 +222,6 @@ static struct resource realview_pb1176_smsc911x_resources[] = {
 	},
 };
 
-static struct platform_device realview_pb1176_smsc911x_device = {
-	.name		= "smc911x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(realview_pb1176_smsc911x_resources),
-	.resource	= realview_pb1176_smsc911x_resources,
-};
-
 static void __init gic_init_irq(void)
 {
 	/* ARM1176 DevChip GIC, primary */
@@ -265,10 +258,8 @@ static void __init realview_pb1176_init(void)
 	l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
 #endif
 
-	clk_register(&realview_clcd_clk);
-
 	realview_flash_register(&realview_pb1176_flash_resource, 1);
-	platform_device_register(&realview_pb1176_smsc911x_device);
+	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
@@ -284,7 +275,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.phys_io	= REALVIEW_PB1176_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= realview_pb1176_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pb1176_timer,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 8b863148ec18..3ebdb2dadd6f 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -230,13 +230,6 @@ static struct resource realview_pb11mp_smsc911x_resources[] = {
 	},
 };
 
-static struct platform_device realview_pb11mp_smsc911x_device = {
-	.name		= "smc911x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(realview_pb11mp_smsc911x_resources),
-	.resource	= realview_pb11mp_smsc911x_resources,
-};
-
 struct resource realview_pb11mp_cf_resources[] = {
 	[0] = {
 		.start		= REALVIEW_PB11MP_CF_BASE,
@@ -292,8 +285,7 @@ static void __init realview_pb11mp_timer_init(void)
 	timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
 
 #ifdef CONFIG_LOCAL_TIMERS
-	twd_base_addr = __io_address(REALVIEW_TC11MP_TWD_BASE);
-	twd_size = REALVIEW_TC11MP_TWD_SIZE;
+	twd_base = __io_address(REALVIEW_TC11MP_TWD_BASE);
 #endif
 	realview_timer_init(IRQ_TC11MP_TIMER0_1);
 }
@@ -312,11 +304,9 @@ static void __init realview_pb11mp_init(void)
 	l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff);
 #endif
 
-	clk_register(&realview_clcd_clk);
-
 	realview_flash_register(realview_pb11mp_flash_resource,
 				ARRAY_SIZE(realview_pb11mp_flash_resource));
-	platform_device_register(&realview_pb11mp_smsc911x_device);
+	realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	platform_device_register(&realview_pb11mp_cf_device);
 
@@ -334,7 +324,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.phys_io	= REALVIEW_PB11MP_UART0_BASE,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= realview_pb11mp_map_io,
 	.init_irq	= gic_init_irq,
 	.timer		= &realview_pb11mp_timer,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
new file mode 100644
index 000000000000..34c94435d2d8
--- /dev/null
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -0,0 +1,300 @@
+/*
+ *  linux/arch/arm/mach-realview/realview_pba8.c
+ *
+ *  Copyright (C) 2008 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/icst307.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/board-pba8.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+#include "clock.h"
+
+static struct map_desc realview_pba8_io_desc[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBA8_GIC_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBA8_GIC_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBA8_GIC_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBA8_GIC_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBA8_TIMER0_1_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBA8_TIMER0_1_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PBA8_TIMER2_3_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBA8_TIMER2_3_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#ifdef CONFIG_PCI
+	{
+		.virtual	= PCIX_UNIT_BASE,
+		.pfn		= __phys_to_pfn(REALVIEW_PBA8_PCI_BASE),
+		.length		= REALVIEW_PBA8_PCI_BASE_SIZE,
+		.type		= MT_DEVICE
+	},
+#endif
+#ifdef CONFIG_DEBUG_LL
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_PBA8_UART0_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PBA8_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#endif
+};
+
+static void __init realview_pba8_map_io(void)
+{
+	iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
+}
+
+/*
+ * RealView PBA8Core AMBA devices
+ */
+
+#define GPIO2_IRQ		{ IRQ_PBA8_GPIO2, NO_IRQ }
+#define GPIO2_DMA		{ 0, 0 }
+#define GPIO3_IRQ		{ IRQ_PBA8_GPIO3, NO_IRQ }
+#define GPIO3_DMA		{ 0, 0 }
+#define AACI_IRQ		{ IRQ_PBA8_AACI, NO_IRQ }
+#define AACI_DMA		{ 0x80, 0x81 }
+#define MMCI0_IRQ		{ IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
+#define MMCI0_DMA		{ 0x84, 0 }
+#define KMI0_IRQ		{ IRQ_PBA8_KMI0, NO_IRQ }
+#define KMI0_DMA		{ 0, 0 }
+#define KMI1_IRQ		{ IRQ_PBA8_KMI1, NO_IRQ }
+#define KMI1_DMA		{ 0, 0 }
+#define PBA8_SMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define PBA8_SMC_DMA		{ 0, 0 }
+#define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define MPMC_DMA		{ 0, 0 }
+#define PBA8_CLCD_IRQ		{ IRQ_PBA8_CLCD, NO_IRQ }
+#define PBA8_CLCD_DMA		{ 0, 0 }
+#define DMAC_IRQ		{ IRQ_PBA8_DMAC, NO_IRQ }
+#define DMAC_DMA		{ 0, 0 }
+#define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
+#define SCTL_DMA		{ 0, 0 }
+#define PBA8_WATCHDOG_IRQ	{ IRQ_PBA8_WATCHDOG, NO_IRQ }
+#define PBA8_WATCHDOG_DMA	{ 0, 0 }
+#define PBA8_GPIO0_IRQ		{ IRQ_PBA8_GPIO0, NO_IRQ }
+#define PBA8_GPIO0_DMA		{ 0, 0 }
+#define GPIO1_IRQ		{ IRQ_PBA8_GPIO1, NO_IRQ }
+#define GPIO1_DMA		{ 0, 0 }
+#define PBA8_RTC_IRQ		{ IRQ_PBA8_RTC, NO_IRQ }
+#define PBA8_RTC_DMA		{ 0, 0 }
+#define SCI_IRQ			{ IRQ_PBA8_SCI, NO_IRQ }
+#define SCI_DMA			{ 7, 6 }
+#define PBA8_UART0_IRQ		{ IRQ_PBA8_UART0, NO_IRQ }
+#define PBA8_UART0_DMA		{ 15, 14 }
+#define PBA8_UART1_IRQ		{ IRQ_PBA8_UART1, NO_IRQ }
+#define PBA8_UART1_DMA		{ 13, 12 }
+#define PBA8_UART2_IRQ		{ IRQ_PBA8_UART2, NO_IRQ }
+#define PBA8_UART2_DMA		{ 11, 10 }
+#define PBA8_UART3_IRQ		{ IRQ_PBA8_UART3, NO_IRQ }
+#define PBA8_UART3_DMA		{ 0x86, 0x87 }
+#define PBA8_SSP_IRQ		{ IRQ_PBA8_SSP, NO_IRQ }
+#define PBA8_SSP_DMA		{ 9, 8 }
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:09",	PBA8_UART3,	NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc,	"dev:00",	PBA8_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:e1",	PBA8_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	NULL);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(rtc,	"dev:e8",	PBA8_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:f1",	PBA8_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:f2",	PBA8_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:f3",	PBA8_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:f4",	PBA8_SSP,	NULL);
+
+/* Primecells on the NEC ISSP chip */
+AMBA_DEVICE(clcd,	"issp:20",	PBA8_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&dmac_device,
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+	&smc_device,
+	&clcd_device,
+	&sctl_device,
+	&wdog_device,
+	&gpio0_device,
+	&gpio1_device,
+	&gpio2_device,
+	&rtc_device,
+	&sci0_device,
+	&ssp0_device,
+	&aaci_device,
+	&mmc0_device,
+	&kmi0_device,
+	&kmi1_device,
+};
+
+/*
+ * RealView PB-A8 platform devices
+ */
+static struct resource realview_pba8_flash_resource[] = {
+	[0] = {
+		.start		= REALVIEW_PBA8_FLASH0_BASE,
+		.end		= REALVIEW_PBA8_FLASH0_BASE + REALVIEW_PBA8_FLASH0_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= REALVIEW_PBA8_FLASH1_BASE,
+		.end		= REALVIEW_PBA8_FLASH1_BASE + REALVIEW_PBA8_FLASH1_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct resource realview_pba8_smsc911x_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PBA8_ETH_BASE,
+		.end		= REALVIEW_PBA8_ETH_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PBA8_ETH,
+		.end		= IRQ_PBA8_ETH,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+struct resource realview_pba8_cf_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PBA8_CF_BASE,
+		.end		= REALVIEW_PBA8_CF_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= REALVIEW_PBA8_CF_MEM_BASE,
+		.end		= REALVIEW_PBA8_CF_MEM_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start		= -1,		/* FIXME: Find correct irq */
+		.end		= -1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device realview_pba8_cf_device = {
+	.name		= "compactflash",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(realview_pba8_cf_resources),
+	.resource	= realview_pba8_cf_resources,
+};
+
+static void __init gic_init_irq(void)
+{
+	/* ARM PB-A8 on-board GIC */
+	gic_cpu_base_addr = __io_address(REALVIEW_PBA8_GIC_CPU_BASE);
+	gic_dist_init(0, __io_address(REALVIEW_PBA8_GIC_DIST_BASE), IRQ_PBA8_GIC_START);
+	gic_cpu_init(0, __io_address(REALVIEW_PBA8_GIC_CPU_BASE));
+}
+
+static void __init realview_pba8_timer_init(void)
+{
+	timer0_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE);
+	timer1_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE) + 0x20;
+	timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
+	timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
+
+	realview_timer_init(IRQ_PBA8_TIMER0_1);
+}
+
+static struct sys_timer realview_pba8_timer = {
+	.init		= realview_pba8_timer_init,
+};
+
+static void __init realview_pba8_init(void)
+{
+	int i;
+
+	realview_flash_register(realview_pba8_flash_resource,
+				ARRAY_SIZE(realview_pba8_flash_resource));
+	realview_eth_register(NULL, realview_pba8_smsc911x_resources);
+	platform_device_register(&realview_i2c_device);
+	platform_device_register(&realview_pba8_cf_device);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+#ifdef CONFIG_LEDS
+	leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_io	= REALVIEW_PBA8_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= realview_pba8_map_io,
+	.init_irq	= gic_init_irq,
+	.timer		= &realview_pba8_timer,
+	.init_machine	= realview_pba8_init,
+MACHINE_END
diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h
index 9f0553b7ec28..20da7f486e51 100644
--- a/arch/arm/mach-rpc/include/mach/io.h
+++ b/arch/arm/mach-rpc/include/mach/io.h
@@ -18,49 +18,6 @@
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
- * GCC is totally crap at loading/storing data.  We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o)			\
- ({						\
-	unsigned int __v, __r = (b);		\
-	__asm__ __volatile__(			\
-		"ldrb	%0, [%1, %2]"		\
-		: "=r" (__v)			\
-		: "r" (__r), "Ir" (o));		\
-	__v;					\
- })
-
-#define __arch_base_getl(b,o)			\
- ({						\
-	unsigned int __v, __r = (b);		\
-	__asm__ __volatile__(			\
-		"ldr	%0, [%1, %2]"		\
-		: "=r" (__v)			\
-		: "r" (__r), "Ir" (o));		\
-	__v;					\
- })
-
-#define __arch_base_putb(v,b,o)			\
- ({						\
-	unsigned int __r = (b);			\
-	__asm__ __volatile__(			\
-		"strb	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (__r), "Ir" (o));\
- })
-
-#define __arch_base_putl(v,b,o)			\
- ({						\
-	unsigned int __r = (b);			\
-	__asm__ __volatile__(			\
-		"str	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (__r), "Ir" (o));\
- })
-
-/*
  * We use two different types of addressing - PC style addresses, and ARM
  * addresses.  PC style accesses the PC hardware with the normal PC IO
  * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
@@ -232,15 +189,13 @@ DECLARE_IO(int,l,"")
 	result;									\
 })
 
-#define __ioaddrc(port)		__ioaddr(port)
-
 #define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
 #define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
 #define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
 #define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
 #define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
 #define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+
 /* the following macro is deprecated */
 #define ioaddr(port)	((unsigned long)__ioaddr((port)))
 
diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
index 4ce6ca97f669..3d2037496e38 100644
--- a/arch/arm/mach-rpc/include/mach/irqs.h
+++ b/arch/arm/mach-rpc/include/mach/irqs.h
@@ -44,3 +44,4 @@
 
 #define IRQ_TIMER		IRQ_TIMER0
 
+#define NR_IRQS			128
diff --git a/arch/arm/mach-rpc/include/mach/dma.h b/arch/arm/mach-rpc/include/mach/isa-dma.h
index 360b56f8f29f..bad720548587 100644
--- a/arch/arm/mach-rpc/include/mach/dma.h
+++ b/arch/arm/mach-rpc/include/mach/isa-dma.h
@@ -1,5 +1,5 @@
 /*
- *  arch/arm/mach-rpc/include/mach/dma.h
+ *  arch/arm/mach-rpc/include/mach/isa-dma.h
  *
  *  Copyright (C) 1997 Russell King
  *
@@ -10,12 +10,6 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS		0xd0000000
 #define MAX_DMA_CHANNELS	8
 
 #define DMA_0			0
diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
index 9bf7e43e2863..78191bf25192 100644
--- a/arch/arm/mach-rpc/include/mach/memory.h
+++ b/arch/arm/mach-rpc/include/mach/memory.h
@@ -24,13 +24,6 @@
 #define PHYS_OFFSET	UL(0x10000000)
 
 /*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
  * Cache flushing area - ROM
  */
 #define FLUSH_BASE_PHYS		0x00000000
diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h
index 8f4878e4f591..cf5901ffd385 100644
--- a/arch/arm/mach-s3c2400/include/mach/memory.h
+++ b/arch/arm/mach-s3c2400/include/mach/memory.h
@@ -17,7 +17,4 @@
 
 #define PHYS_OFFSET	UL(0x0C000000)
 
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
 #endif
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 99fdc736698c..63a30d1dd425 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -7,6 +7,7 @@
 config CPU_S3C2410
 	bool
 	depends on ARCH_S3C2410
+	select CPU_ARM920T
 	select S3C2410_CLOCK
 	select S3C2410_GPIO
 	select CPU_LLSERIAL_S3C2410
@@ -32,11 +33,6 @@ config S3C2410_GPIO
 	help
 	  GPIO code for S3C2410 and similar processors
 
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors
-
 config SIMTEC_NOR
 	bool
 	help
@@ -84,6 +80,7 @@ config ARCH_BAST
 	select PM_SIMTEC if PM
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
+	select S3C24XX_DCLK
 	select ISA
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
@@ -121,6 +118,7 @@ config MACH_TCT_HAMMER
 config MACH_VR1000
 	bool "Thorcom VR1000"
 	select PM_SIMTEC if PM
+	select S3C24XX_DCLK
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
 	select CPU_S3C2410
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 00f31f8c4e78..fca02f82711c 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
-obj-$(CONFIG_S3C2410_CLOCK)	+= clock.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 7d914a470b6c..552b4c778fdc 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -17,7 +17,6 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 
-#include <asm/dma.h>
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
@@ -25,12 +24,12 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-ac97.h>
+#include <plat/regs-ac97.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
 	[DMACH_XD0] = {
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 891b53cd69b8..13358ce2128c 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -16,11 +16,6 @@
 #include <linux/sysdev.h>
 #include <mach/hardware.h>
 
-/*
- * This is the maximum DMA address(physical address) that can be DMAd to.
- *
- */
-#define MAX_DMA_ADDRESS		0x40000000
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
 
 /* We use `virtual` dma channels to hide the fact we have only a limited
@@ -254,7 +249,7 @@ typedef unsigned long dma_device_t;
  * request a dma channel exclusivley
 */
 
-extern int s3c2410_dma_request(dmach_t channel,
+extern int s3c2410_dma_request(unsigned int channel,
 			       struct s3c2410_dma_client *, void *dev);
 
 
@@ -263,14 +258,14 @@ extern int s3c2410_dma_request(dmach_t channel,
  * change the state of the dma channel
 */
 
-extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
+extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
 
 /* s3c2410_dma_setflags
  *
  * set the channel's flags to a given state
 */
 
-extern int s3c2410_dma_setflags(dmach_t channel,
+extern int s3c2410_dma_setflags(unsigned int channel,
 				unsigned int flags);
 
 /* s3c2410_dma_free
@@ -278,7 +273,7 @@ extern int s3c2410_dma_setflags(dmach_t channel,
  * free the dma channel (will also abort any outstanding operations)
 */
 
-extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
+extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
 
 /* s3c2410_dma_enqueue
  *
@@ -287,7 +282,7 @@ extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
  * drained before the buffer is given to the DMA system.
 */
 
-extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
+extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
 			       dma_addr_t data, int size);
 
 /* s3c2410_dma_config
@@ -295,7 +290,7 @@ extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
  * configure the dma channel
 */
 
-extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
+extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
 
 /* s3c2410_dma_devconfig
  *
@@ -310,11 +305,11 @@ extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
  * get the position that the dma transfer is currently at
 */
 
-extern int s3c2410_dma_getposition(dmach_t channel,
+extern int s3c2410_dma_getposition(unsigned int channel,
 				   dma_addr_t *src, dma_addr_t *dest);
 
-extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
+extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
 
 /* DMA Register definitions */
 
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
new file mode 100644
index 000000000000..6c9fbb99ef14
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -0,0 +1,34 @@
+/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 - GPIO core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+#include <plat/gpio-core.h>
+#include <mach/regs-gpio.h>
+
+extern struct s3c_gpio_chip s3c24xx_gpios[];
+
+static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+{
+	struct s3c_gpio_chip *chip;
+
+	if (pin > S3C2410_GPG10)
+		return NULL;
+
+	chip = &s3c24xx_gpios[pin/32];
+	return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
+}
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 3b52b86498a6..e0349af8a483 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -15,4 +15,10 @@
 #define gpio_set_value	__gpio_set_value
 #define gpio_cansleep	__gpio_cansleep
 
+/* some boards require extra gpio capacity to support external
+ * devices that need GPIO.
+ */
+
+#define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
+
 #include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 950c71bf1489..9565903d490b 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -134,6 +134,8 @@
 #define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
 #define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
 
+#define IRQ_HSMMC0		IRQ_S3C2443_HSMMC
+
 #define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
 #define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
 #define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
@@ -160,6 +162,12 @@
 #define NR_IRQS (IRQ_S3C2440_AC97+1)
 #endif
 
+/* compatibility define. */
+#define IRQ_UART3		IRQ_S3C2443_UART3
+#define IRQ_S3CUART_RX3		IRQ_S3C2443_RX3
+#define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
+#define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
+
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
 #define FIQ_START		IRQ_EINT0
 
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 23c470c2e5b1..255fdfeaf957 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -13,34 +13,20 @@
 #ifndef __ASM_ARCH_MAP_H
 #define __ASM_ARCH_MAP_H
 
+#include <plat/map-base.h>
 #include <plat/map.h>
 
 #define S3C2410_ADDR(x)		S3C_ADDR(x)
 
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ	   S3C_VA_IRQ
-#define S3C2410_PA_IRQ	   (0x4A000000)
-#define S3C24XX_SZ_IRQ	   SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
 /* USB host controller */
 #define S3C2410_PA_USBHOST (0x49000000)
-#define S3C24XX_SZ_USBHOST SZ_1M
 
 /* DMA controller */
 #define S3C2410_PA_DMA	   (0x4B000000)
 #define S3C24XX_SZ_DMA	   SZ_1M
 
 /* Clock and Power management */
-#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
 #define S3C2410_PA_CLKPWR  (0x4C000000)
-#define S3C24XX_SZ_CLKPWR  SZ_1M
 
 /* LCD controller */
 #define S3C2410_PA_LCD	   (0x4D000000)
@@ -48,48 +34,12 @@
 
 /* NAND flash controller */
 #define S3C2410_PA_NAND	   (0x4E000000)
-#define S3C24XX_SZ_NAND	   SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART	   S3C_VA_UART
-#define S3C2410_PA_UART	   (0x50000000)
-#define S3C24XX_SZ_UART	   SZ_1M
-
-/* Timers */
-#define S3C24XX_VA_TIMER   S3C_VA_TIMER
-#define S3C2410_PA_TIMER   (0x51000000)
-#define S3C24XX_SZ_TIMER   SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV  (0x52000000)
-#define S3C24XX_SZ_USBDEV  SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
 
 /* IIC hardware controller */
 #define S3C2410_PA_IIC	   (0x54000000)
-#define S3C24XX_SZ_IIC	   SZ_1M
 
 /* IIS controller */
 #define S3C2410_PA_IIS	   (0x55000000)
-#define S3C24XX_SZ_IIS	   SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO	   (0x56000000)
-#define S3C24XX_VA_GPIO	   ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO	   SZ_1M
 
 /* RTC */
 #define S3C2410_PA_RTC	   (0x57000000)
@@ -97,15 +47,12 @@
 
 /* ADC */
 #define S3C2410_PA_ADC	   (0x58000000)
-#define S3C24XX_SZ_ADC	   SZ_1M
 
 /* SPI */
 #define S3C2410_PA_SPI	   (0x59000000)
-#define S3C24XX_SZ_SPI	   SZ_1M
 
 /* SDI */
 #define S3C2410_PA_SDI	   (0x5A000000)
-#define S3C24XX_SZ_SDI	   SZ_1M
 
 /* CAMIF */
 #define S3C2440_PA_CAMIF   (0x4F000000)
@@ -120,13 +67,6 @@
 #define S3C2443_PA_HSMMC   (0x4A800000)
 #define S3C2443_SZ_HSMMC   (256)
 
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
-
 /* physical addresses of all the chip-select areas */
 
 #define S3C2410_CS0 (0x00000000)
@@ -152,27 +92,16 @@
 #define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
 #define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
 #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
-#define S3C24XX_PA_IIC      S3C2410_PA_IIC
 #define S3C24XX_PA_IIS      S3C2410_PA_IIS
 #define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
 #define S3C24XX_PA_RTC      S3C2410_PA_RTC
 #define S3C24XX_PA_ADC      S3C2410_PA_ADC
 #define S3C24XX_PA_SPI      S3C2410_PA_SPI
+#define S3C24XX_PA_SDI      S3C2410_PA_SDI
+#define S3C24XX_PA_NAND	    S3C2410_PA_NAND
 
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
+#define S3C_PA_IIC          S3C2410_PA_IIC
+#define S3C_PA_UART	    S3C24XX_PA_UART
+#define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h
index 93782628a786..6f1e5871ae4b 100644
--- a/arch/arm/mach-s3c2410/include/mach/memory.h
+++ b/arch/arm/mach-s3c2410/include/mach/memory.h
@@ -13,7 +13,4 @@
 
 #define PHYS_OFFSET	UL(0x30000000)
 
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
 #endif
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index b3f90aa78076..2a5d90e957fb 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -42,13 +42,6 @@
 #define S3C2410_CLKCON_IIS	     (1<<17)
 #define S3C2410_CLKCON_SPI	     (1<<18)
 
-#define S3C2410_PLLCON_MDIVSHIFT     12
-#define S3C2410_PLLCON_PDIVSHIFT     4
-#define S3C2410_PLLCON_SDIVSHIFT     0
-#define S3C2410_PLLCON_MDIVMASK	     ((1<<(1+(19-12)))-1)
-#define S3C2410_PLLCON_PDIVMASK	     ((1<<5)-1)
-#define S3C2410_PLLCON_SDIVMASK	     3
-
 /* DCLKCON register addresses in gpio.h */
 
 #define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
@@ -76,32 +69,6 @@
 #define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
 #define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
 
-#ifndef __ASSEMBLY__
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2410_PLLCON_MDIVMASK;
-	pdiv &= S3C2410_PLLCON_PDIVMASK;
-	sdiv &= S3C2410_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#endif /* __ASSEMBLY__ */
-
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 
 /* extra registers */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 528080ceac44..321077613067 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -1053,13 +1053,6 @@
 #define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
 #define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
 
-/* values for S3C2410_EXTINT0/1/2 */
-#define S3C2410_EXTINT_LOWLEV	 (0x00)
-#define S3C2410_EXTINT_HILEV	 (0x01)
-#define S3C2410_EXTINT_FALLEDGE	 (0x02)
-#define S3C2410_EXTINT_RISEEDGE	 (0x04)
-#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
-
 /* interrupt filtering conrrol for EINT16..EINT23 */
 #define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
 #define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
index 3fe8be9ca110..980a099e209c 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -18,6 +18,7 @@ struct s3c2410_spigpio_info {
 	unsigned long		 pin_mosi;
 	unsigned long		 pin_miso;
 
+	int			 num_chipselect;
 	int			 bus_num;
 
 	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 46d46f5b99f2..774f3adfe8ad 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -22,5 +22,12 @@ struct s3c2410_spi_info {
 	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
 };
 
+/* Standard setup / suspend routines for SPI GPIO pins. */
+
+extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
+						 int enable);
+
+extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
+					      int enable);
 
 #endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index 43535a0e7186..7613d0a384ba 100644
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -13,7 +13,7 @@
 #include <mach/hardware.h>
 #include <linux/io.h>
 
-#include <asm/plat-s3c/regs-watchdog.h>
+#include <plat/regs-watchdog.h>
 #include <mach/regs-clock.h>
 
 #include <linux/clk.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/tick.h b/arch/arm/mach-s3c2410/include/mach/tick.h
new file mode 100644
index 000000000000..544da41979db
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/tick.h
@@ -0,0 +1,15 @@
+/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 - timer tick support
+ */
+
+#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
+
+static inline int s3c24xx_ostimer_pending(void)
+{
+	return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
+}
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index ab39491beee2..c9432103750d 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -1,3 +1,4 @@
+
 /* arch/arm/mach-s3c2410/include/mach/uncompress.h
  *
  * Copyright (c) 2003, 2007 Simtec Electronics
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index d061fea01900..6d6995afeb43 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -52,6 +52,7 @@
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 
+#include <plat/iic.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 
@@ -150,7 +151,7 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 #endif
 	&s3c_device_adc,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_usb,
  	&s3c_device_rtc,
 	&s3c_device_usbgadget,
@@ -233,6 +234,7 @@ static void __init amlm5900_init(void)
 #ifdef CONFIG_FB_S3C2410
 	s3c24xx_fb_set_platdata(&amlm5900_fb_info);
 #endif
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 8db9c700e3c2..01bd76725b92 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -44,8 +44,8 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 
-#include <asm/plat-s3c/nand.h>
-#include <asm/plat-s3c/iic.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
 #include <mach/fb.h>
 
 #include <linux/mtd/mtd.h>
@@ -406,7 +406,7 @@ static struct platform_device bast_sio = {
  * standard 100KHz i2c bus frequency
 */
 
-static struct s3c2410_platform_i2c bast_i2c_info = {
+static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
 	.flags		= 0,
 	.slave_addr	= 0x10,
 	.bus_freq	= 100*1000,
@@ -553,7 +553,7 @@ static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
  	&s3c_device_rtc,
 	&s3c_device_nand,
 	&bast_device_dm9k,
@@ -588,7 +588,8 @@ static void __init bast_map_io(void)
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
-	s3c_device_i2c.dev.platform_data = &bast_i2c_info;
+
+	s3c_i2c0_set_platdata(&bast_i2c_info);
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 98716d0108e9..821a1668c3ac 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -38,11 +38,13 @@
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/udc.h>
+#include <plat/iic.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/pll.h>
 #include <plat/pm.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
@@ -183,7 +185,7 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
 	&s3c_device_leds,
@@ -215,6 +217,7 @@ static void __init h1940_init(void)
 
 	s3c24xx_fb_set_platdata(&h1940_fb_info);
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
@@ -223,10 +226,9 @@ static void __init h1940_init(void)
 			      S3C2410_MISCCR_USBSUSPND0 |
 			      S3C2410_MISCCR_USBSUSPND1, 0x0);
 
-	tmp = (
-		 0x78 << S3C2410_PLLCON_MDIVSHIFT)
-	      | (0x02 << S3C2410_PLLCON_PDIVSHIFT)
-	      | (0x03 << S3C2410_PLLCON_SDIVSHIFT);
+	tmp =   (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
+	      | (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
+	      | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
 	writel(tmp, S3C2410_UPLLCON);
 
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 82505517846c..05a5e877b49b 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
-#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/init.h>
 #include <linux/input.h>
@@ -40,14 +39,14 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <asm/plat-s3c/iic.h>
+#include <plat/iic.h>
 #include <plat/regs-serial.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/s3c2410.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/udc.h>
 
 static struct map_desc n30_iodesc[] __initdata = {
 	/* nothing here yet */
@@ -320,7 +319,7 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = {
 static struct platform_device *n30_devices[] __initdata = {
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usb,
 	&s3c_device_usbgadget,
@@ -332,7 +331,7 @@ static struct platform_device *n30_devices[] __initdata = {
 static struct platform_device *n35_devices[] __initdata = {
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
 	&n35_button_device,
@@ -501,7 +500,7 @@ static void __init n30_init_irq(void)
 static void __init n30_init(void)
 {
 	s3c24xx_fb_set_platdata(&n30_fb_info);
-	s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
+	s3c_device_i2c0.dev.platform_data = &n30_i2ccfg;
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
 
 	/* Turn off suspend on both USB ports, and switch the
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index d8255cf87e44..f6c7261a4a12 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -35,6 +35,7 @@
 #include <plat/s3c2410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
+#include <plat/iic.h>
 #include <plat/cpu.h>
 
 static struct map_desc otom11_iodesc[] __initdata = {
@@ -94,7 +95,7 @@ static struct platform_device *otom11_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
  	&s3c_device_rtc,
 	&otom_device_nor,
@@ -109,6 +110,7 @@ static void __init otom11_map_io(void)
 
 static void __init otom11_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 661807e14e8a..9678a53ceeb1 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -50,10 +50,11 @@
 #include <mach/leds-gpio.h>
 #include <plat/regs-serial.h>
 #include <mach/fb.h>
-#include <asm/plat-s3c/nand.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/nand.h>
+#include <plat/udc.h>
 #include <mach/spi.h>
 #include <mach/spi-gpio.h>
+#include <plat/iic.h>
 
 #include <plat/common-smdk.h>
 #include <plat/devs.h>
@@ -247,7 +248,7 @@ static struct platform_device *qt2410_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_sdi,
 	&s3c_device_usbgadget,
@@ -349,6 +350,7 @@ static void __init qt2410_machine_init(void)
 	s3c2410_gpio_setpin(S3C2410_GPB0, 1);
 
 	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
 
 	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
 
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 152527bb2872..c49126ccb1d5 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -47,6 +47,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/iic.h>
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -89,7 +90,7 @@ static struct platform_device *smdk2410_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 };
 
@@ -102,6 +103,7 @@ static void __init smdk2410_map_io(void)
 
 static void __init smdk2410_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
 	smdk_machine_init();
 }
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 309dcf4c870a..8fdb0430bd48 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -45,6 +45,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/iic.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 
@@ -127,7 +128,7 @@ static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
 static struct platform_device *tct_hammer_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_usb,
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
@@ -146,6 +147,7 @@ static void __init tct_hammer_map_io(void)
 
 static void __init tct_hammer_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 941353af16dc..61a1ea9c5c5c 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -47,6 +47,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/iic.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -334,7 +335,7 @@ static struct platform_device *vr1000_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_adc,
 	&serial_device,
 	&vr1000_dm9k0,
@@ -384,6 +385,7 @@ static void __init vr1000_map_io(void)
 
 static void __init vr1000_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
 
 	i2c_register_board_info(0, vr1000_i2c_devs,
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index ac79b536c4c3..feb141b1f915 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -28,6 +29,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#include <plat/cpu-freq.h>
+
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 
@@ -35,6 +38,7 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
+#include <plat/pll.h>
 
 /* Initial IO mappings */
 
@@ -59,25 +63,28 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
  * machine specific initialisation.
 */
 
-void __init s3c2410_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2410_map_io(void)
 {
-	/* register our io-tables */
-
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
-	iotable_init(mach_desc, mach_size);
 }
 
-void __init s3c2410_init_clocks(int xtal)
+void __init_or_cpufreq s3c2410_setup_clocks(void)
 {
+	struct clk *xtal_clk;
 	unsigned long tmp;
+	unsigned long xtal;
 	unsigned long fclk;
 	unsigned long hclk;
 	unsigned long pclk;
 
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
 	/* now we've got our machine bits initialised, work out what
 	 * clocks we've got */
 
-	fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
+	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
 
 	tmp = __raw_readl(S3C2410_CLKDIVN);
 
@@ -95,7 +102,13 @@ void __init s3c2410_init_clocks(int xtal)
 	 * console to use them
 	 */
 
-	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2410_init_clocks(int xtal)
+{
+	s3c24xx_register_baseclocks(xtal);
+	s3c2410_setup_clocks();
 	s3c2410_baseclk_add();
 }
 
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index c59a9d2ee9a6..ca99564ae4b5 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -7,6 +7,7 @@
 config CPU_S3C2412
 	bool
 	depends on ARCH_S3C2410
+	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
 	select S3C2412_PM if PM
 	select S3C2412_DMA if S3C2410_DMA
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 96d9eb15424f..a037df5e1c2d 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -93,12 +93,6 @@ static int s3c2412_upll_enable(struct clk *clk, int enable)
 
 /* clock selections */
 
-/* CPU EXTCLK input */
-static struct clk clk_ext = {
-	.name		= "extclk",
-	.id		= -1,
-};
-
 static struct clk clk_erefclk = {
 	.name		= "erefclk",
 	.id		= -1,
@@ -773,5 +767,6 @@ int __init s3c2412_baseclk_add(void)
 		s3c2412_clkcon_enable(clkp, 0);
 	}
 
+	s3c_pwmclk_init();
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index ba0591e71f32..919856c9433f 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -18,7 +18,6 @@
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
-#include <asm/dma.h>
 #include <mach/dma.h>
 
 #include <plat/dma.h>
@@ -26,13 +25,13 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-ac97.h>
+#include <plat/regs-ac97.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
 
 #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }
 
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index b08f18c8c47a..ecddbbb34832 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -17,7 +17,6 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
-#include <linux/delay.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
@@ -31,8 +30,8 @@
 #include <asm/mach/irq.h>
 
 #include <plat/regs-serial.h>
-#include <asm/plat-s3c/nand.h>
-#include <asm/plat-s3c/iic.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
 
 #include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
@@ -52,7 +51,8 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/udc.h>
+#include <plat/iic.h>
 
 static struct map_desc jive_iodesc[] __initdata = {
 };
@@ -398,11 +398,12 @@ static struct s3c2410_spigpio_info jive_lcd_spi = {
 	.bus_num	= 1,
 	.pin_clk	= S3C2410_GPG8,
 	.pin_mosi	= S3C2410_GPB8,
+	.num_chipselect	= 1,
 	.chip_select	= jive_lcd_spi_chipselect,
 };
 
 static struct platform_device jive_device_lcdspi = {
-	.name		= "s3c24xx-spi-gpio",
+	.name		= "spi_s3c24xx_gpio",
 	.id		= 1,
 	.num_resources  = 0,
 	.dev.platform_data = &jive_lcd_spi,
@@ -419,11 +420,12 @@ static struct s3c2410_spigpio_info jive_wm8750_spi = {
 	.bus_num	= 2,
 	.pin_clk	= S3C2410_GPB4,
 	.pin_mosi	= S3C2410_GPB9,
+	.num_chipselect	= 1,
 	.chip_select	= jive_wm8750_chipselect,
 };
 
 static struct platform_device jive_device_wm8750 = {
-	.name		= "s3c24xx-spi-gpio",
+	.name		= "spi_s3c24xx_gpio",
 	.id		= 2,
 	.num_resources  = 0,
 	.dev.platform_data = &jive_wm8750_spi,
@@ -450,14 +452,14 @@ static struct spi_board_info __initdata jive_spi_devs[] = {
 
 /* I2C bus and device configuration. */
 
-static struct s3c2410_platform_i2c jive_i2c_cfg = {
+static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
 	.max_freq	= 80 * 1000,
 	.bus_freq	= 50 * 1000,
 	.flags		= S3C_IICFLG_FILTER,
 	.sda_delay	= 2,
 };
 
-static struct i2c_board_info jive_i2c_devs[] = {
+static struct i2c_board_info jive_i2c_devs[] __initdata = {
 	[0] = {
 		I2C_BOARD_INFO("lis302dl", 0x1c),
 		.irq	= IRQ_EINT14,
@@ -470,7 +472,7 @@ static struct platform_device *jive_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_lcd,
 	&jive_device_lcdspi,
 	&jive_device_wm8750,
@@ -663,7 +665,7 @@ static void __init jive_machine_init(void)
 
 	spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
 
-	s3c_device_i2c.dev.platform_data = &jive_i2c_cfg;
+	s3c_i2c0_set_platdata(&jive_i2c_cfg);
 	i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
 
 	pm_power_off = jive_power_off;
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index c719b5a740a9..eba66aa6bd20 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -37,7 +37,8 @@
 #include <mach/regs-lcd.h>
 
 #include <mach/idle.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/udc.h>
+#include <plat/iic.h>
 #include <mach/fb.h>
 
 #include <plat/s3c2410.h>
@@ -105,7 +106,7 @@ static struct platform_device *smdk2413_devices[] __initdata = {
 	&s3c_device_usb,
 	//&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
 };
@@ -142,6 +143,7 @@ static void __init smdk2413_machine_init(void)
 
 
  	s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
 
 	platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
 	smdk_machine_init();
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 4cfa19ad9be0..11e8ad49fc7b 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -39,7 +39,8 @@
 #include <mach/idle.h>
 #include <mach/fb.h>
 
-#include <asm/plat-s3c/nand.h>
+#include <plat/iic.h>
+#include <plat/nand.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2412.h>
@@ -122,7 +123,7 @@ static struct s3c2410_platform_nand vstms_nand_info = {
 static struct platform_device *vstms_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_rtc,
 	&s3c_device_nand,
@@ -151,6 +152,7 @@ static void __init vstms_map_io(void)
 
 static void __init vstms_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
 }
 
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 313759c3da69..5b5aba69ec3f 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
@@ -33,13 +34,15 @@
 #include <mach/reset.h>
 #include <mach/idle.h>
 
+#include <plat/cpu-freq.h>
+
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-gpioj.h>
 #include <mach/regs-dsc.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
 #include <mach/regs-s3c2412.h>
 
 #include <plat/s3c2412.h>
@@ -47,6 +50,7 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/pm.h>
+#include <plat/pll.h>
 
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
@@ -136,7 +140,7 @@ static void s3c2412_hard_reset(void)
  * machine specific initialisation.
 */
 
-void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2412_map_io(void)
 {
 	/* move base of IO */
 
@@ -153,20 +157,25 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
 	/* register our io-tables */
 
 	iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
-	iotable_init(mach_desc, mach_size);
 }
 
-void __init s3c2412_init_clocks(int xtal)
+void __init_or_cpufreq s3c2412_setup_clocks(void)
 {
+	struct clk *xtal_clk;
 	unsigned long tmp;
+	unsigned long xtal;
 	unsigned long fclk;
 	unsigned long hclk;
 	unsigned long pclk;
 
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
 	/* now we've got our machine bits initialised, work out what
 	 * clocks we've got */
 
-	fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2);
+	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
 
 	clk_mpll.rate = fclk;
 
@@ -183,11 +192,17 @@ void __init s3c2412_init_clocks(int xtal)
 	printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
 	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
 
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2412_init_clocks(int xtal)
+{
 	/* initialise the clocks here, to allow other things like the
 	 * console to use them
 	 */
 
-	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+	s3c24xx_register_baseclocks(xtal);
+	s3c2412_setup_clocks();
 	s3c2412_baseclk_add();
 }
 
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 25de042ab996..cde5ae9a4340 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -7,6 +7,7 @@
 config CPU_S3C2440
 	bool
 	depends on ARCH_S3C2410
+	select CPU_ARM920T
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select S3C2410_GPIO
@@ -28,8 +29,10 @@ menu "S3C2440 Machines"
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
 	select CPU_S3C2440
+	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
+	select S3C24XX_GPIO_EXTRA64
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
@@ -37,7 +40,9 @@ config MACH_ANUBIS
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
 	select CPU_S3C2440
+	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
+	select S3C24XX_GPIO_EXTRA128
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 32303f6a8321..5b5ee0b8f4e0 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -17,7 +17,6 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 
-#include <asm/dma.h>
 #include <mach/dma.h>
 
 #include <plat/dma.h>
@@ -25,12 +24,12 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-ac97.h>
+#include <plat/regs-ac97.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
 	[DMACH_XD0] = {
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index e2beca470484..b05d56e230a1 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -39,7 +39,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
-#include <asm/plat-s3c/nand.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -366,6 +367,8 @@ static struct sm501_initdata anubis_sm501_initdata = {
 		.mask	= 0,
 	},
 
+	.devices	= SM501_USE_GPIO,
+
 	/* set the SDRAM and bus clocks */
 	.mclk		= 72 * MHZ,
 	.m1xclk		= 144 * MHZ,
@@ -373,10 +376,12 @@ static struct sm501_initdata anubis_sm501_initdata = {
 
 static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
 	[0] = {
+		.bus_num	= 1,
 		.pin_scl	= 44,
 		.pin_sda	= 45,
 	},
 	[1] = {
+		.bus_num	= 2,
 		.pin_scl	= 40,
 		.pin_sda	= 41,
 	},
@@ -384,6 +389,7 @@ static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
 
 static struct sm501_platdata anubis_sm501_platdata = {
 	.init		= &anubis_sm501_initdata,
+	.gpio_base	= -1,
 	.gpio_i2c	= anubis_sm501_gpio_i2c,
 	.gpio_i2c_nr	= ARRAY_SIZE(anubis_sm501_gpio_i2c),
 };
@@ -404,7 +410,7 @@ static struct platform_device *anubis_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_wdt,
 	&s3c_device_adc,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
  	&s3c_device_rtc,
 	&s3c_device_nand,
 	&anubis_device_ide0,
@@ -468,6 +474,7 @@ static void __init anubis_map_io(void)
 
 static void __init anubis_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
 
 	i2c_register_board_info(0, anubis_i2c_devs,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 66876c6f2f1c..0a6d0a5d961b 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -28,6 +28,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/fb.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -35,7 +36,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
-#include <asm/plat-s3c/nand.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -45,6 +47,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <asm/plat-s3c24xx/mci.h>
 
 static struct map_desc at2440evb_iodesc[] __initdata = {
 	/* Nothing here */
@@ -162,19 +165,60 @@ static struct platform_device at2440evb_device_eth = {
 	},
 };
 
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
+	.gpio_detect	= S3C2410_GPG10,
+};
+
+/* 7" LCD panel */
+
+static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
+
+	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+			  S3C2410_LCDCON5_INVVLINE |
+			  S3C2410_LCDCON5_INVVFRAME |
+			  S3C2410_LCDCON5_PWREN |
+			  S3C2410_LCDCON5_HWSWP,
+
+	.type		= S3C2410_LCDCON1_TFT,
+
+	.width		= 800,
+	.height		= 480,
+
+	.pixclock	= 33333, /* HCLK 60 MHz, divisor 2 */
+	.xres		= 800,
+	.yres		= 480,
+	.bpp		= 16,
+	.left_margin	= 88,
+	.right_margin	= 40,
+	.hsync_len	= 128,
+	.upper_margin	= 32,
+	.lower_margin	= 11,
+	.vsync_len	= 2,
+};
+
+static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
+	.displays	= &at2440evb_lcd_cfg,
+	.num_displays	= 1,
+	.default_display = 0,
+};
+
 static struct platform_device *at2440evb_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_wdt,
 	&s3c_device_adc,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_rtc,
 	&s3c_device_nand,
+	&s3c_device_sdi,
+	&s3c_device_lcd,
 	&at2440evb_device_eth,
 };
 
 static void __init at2440evb_map_io(void)
 {
 	s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
+	s3c_device_sdi.name = "s3c2440-sdi";
+	s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
 
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
 	s3c24xx_init_clocks(16934400);
@@ -183,6 +227,9 @@ static void __init at2440evb_map_io(void)
 
 static void __init at2440evb_init(void)
 {
+	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+	s3c_i2c0_set_platdata(NULL);
+
 	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
 }
 
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index a546307fd53d..7aeaa972d7f5 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -37,6 +37,7 @@
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-serial.h>
+#include <plat/iic.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2440.h>
@@ -107,7 +108,7 @@ static struct platform_device *nexcoder_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
  	&s3c_device_rtc,
 	&s3c_device_camif,
@@ -142,6 +143,7 @@ static void __init nexcoder_map_io(void)
 
 static void __init nexcoder_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
 };
 
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 2361d606abc5..41a00f57e5da 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -37,7 +37,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
-#include <asm/plat-s3c/nand.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -335,7 +336,7 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 /* Standard Osiris devices */
 
 static struct platform_device *osiris_devices[] __initdata = {
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_wdt,
 	&s3c_device_nand,
 	&osiris_pcmcia,
@@ -398,6 +399,8 @@ static void __init osiris_init(void)
 	sysdev_class_register(&osiris_pm_sysclass);
 	sysdev_register(&osiris_pm_sysdev);
 
+	s3c_i2c0_set_platdata(NULL);
+
 	i2c_register_board_info(0, osiris_i2c_devs,
 				ARRAY_SIZE(osiris_i2c_devs));
 
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 4d14c7cff892..12d378f84ad2 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -42,7 +42,7 @@
 #include <mach/regs-lcd.h>
 
 #include <mach/h1940.h>
-#include <asm/plat-s3c/nand.h>
+#include <plat/nand.h>
 #include <mach/fb.h>
 
 #include <plat/clock.h>
@@ -179,7 +179,7 @@ static struct platform_device *rx3715_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_nand,
 };
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index fefeaaa4155f..db6eafbd4d90 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -37,6 +37,7 @@
 
 #include <mach/idle.h>
 #include <mach/fb.h>
+#include <plat/iic.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2440.h>
@@ -152,7 +153,7 @@ static struct platform_device *smdk2440_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
-	&s3c_device_i2c,
+	&s3c_device_i2c0,
 	&s3c_device_iis,
 };
 
@@ -166,6 +167,7 @@ static void __init smdk2440_map_io(void)
 static void __init smdk2440_machine_init(void)
 {
 	s3c24xx_fb_set_platdata(&smdk2440_fb_info);
+	s3c_i2c0_set_platdata(NULL);
 
 	platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
 	smdk_machine_init();
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 26d131a77074..b289d198020e 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -7,6 +7,7 @@
 config CPU_S3C2442
 	bool
 	depends on ARCH_S3C2410
+	select CPU_ARM920T
 	select S3C2410_CLOCK
 	select S3C2410_GPIO
 	select S3C2410_PM if PM
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 14252f573754..212141baebec 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -24,6 +24,7 @@ config MACH_SMDK2443
 	bool "SMDK2443"
 	select CPU_S3C2443
 	select MACH_SMDK
+	select S3C_DEV_HSMMC
 	help
 	  Say Y here if you are using an SMDK2443
 
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index f854e7385e3c..2785d69c95b0 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -29,7 +29,6 @@
 #include <linux/sysdev.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
-#include <linux/delay.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
@@ -39,6 +38,8 @@
 
 #include <mach/regs-s3c2443-clock.h>
 
+#include <plat/cpu-freq.h>
+
 #include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/cpu.h>
@@ -145,12 +146,6 @@ static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
 
 /* clock selections */
 
-/* CPU EXTCLK input */
-static struct clk clk_ext = {
-	.name		= "ext",
-	.id		= -1,
-};
-
 static struct clk clk_mpllref = {
 	.name		= "mpllref",
 	.parent		= &clk_xtal,
@@ -165,14 +160,6 @@ static struct clk clk_mpll = {
 };
 #endif
 
-static struct clk clk_epllref;
-
-static struct clk clk_epll = {
-	.name		= "epll",
-	.parent		= &clk_epllref,
-	.id		= -1,
-};
-
 static struct clk clk_i2s_ext = {
 	.name		= "i2s-ext",
 	.id		= -1,
@@ -1011,22 +998,20 @@ static struct clk *clks[] __initdata = {
 	&clk_prediv,
 };
 
-void __init s3c2443_init_clocks(int xtal)
+void __init_or_cpufreq s3c2443_setup_clocks(void)
 {
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
 	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
 	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+	struct clk *xtal_clk;
+	unsigned long xtal;
 	unsigned long pll;
 	unsigned long fclk;
 	unsigned long hclk;
 	unsigned long pclk;
-	struct clk *clkp;
-	int ret;
-	int ptr;
 
-	/* s3c2443 parents h and p clocks from prediv */
-	clk_h.parent = &clk_prediv;
-	clk_p.parent = &clk_prediv;
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
 
 	pll = s3c2443_get_mpll(mpllcon, xtal);
 	clk_msysclk.rate = pll;
@@ -1036,13 +1021,29 @@ void __init s3c2443_init_clocks(int xtal)
 	hclk /= s3c2443_get_hdiv(clkdiv0);
  	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
 
-	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
 
 	printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
 	       (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
 	       print_mhz(pll), print_mhz(fclk),
 	       print_mhz(hclk), print_mhz(pclk));
 
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c2443_init_clocks(int xtal)
+{
+	struct clk *clkp;
+	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
+	int ret;
+	int ptr;
+
+	/* s3c2443 parents h and p clocks from prediv */
+	clk_h.parent = &clk_prediv;
+	clk_p.parent = &clk_prediv;
+
+	s3c24xx_register_baseclocks(xtal);
+	s3c2443_setup_clocks();
 	s3c2443_clk_initparents();
 
 	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
@@ -1056,7 +1057,7 @@ void __init s3c2443_init_clocks(int xtal)
 	}
 
 	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-
+	clk_epll.parent = &clk_epllref;
 	clk_usb_bus.parent = &clk_usb_bus_host;
 
 	/* ensure usb bus clock is within correct rate of 48MHz */
@@ -1105,4 +1106,6 @@ void __init s3c2443_init_clocks(int xtal)
 
 		(clkp->enable)(clkp, 0);
 	}
+
+	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index f73ccb25ff94..2a58a4d5aa5a 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -18,7 +18,6 @@
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
-#include <asm/dma.h>
 #include <mach/dma.h>
 
 #include <plat/dma.h>
@@ -26,12 +25,12 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-ac97.h>
+#include <plat/regs-ac97.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
 
 #define MAP(x) { \
 		[0]	= (x) | DMA_CH_VALID,	\
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index a7fe65f3dcc1..039a46243105 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -37,6 +37,7 @@
 
 #include <mach/idle.h>
 #include <mach/fb.h>
+#include <plat/iic.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2440.h>
@@ -103,8 +104,8 @@ static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
 
 static struct platform_device *smdk2443_devices[] __initdata = {
 	&s3c_device_wdt,
-	&s3c_device_i2c,
-	&s3c_device_hsmmc,
+	&s3c_device_i2c0,
+	&s3c_device_hsmmc0,
 };
 
 static void __init smdk2443_map_io(void)
@@ -116,6 +117,7 @@ static void __init smdk2443_map_io(void)
 
 static void __init smdk2443_machine_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
 	platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
 	smdk_machine_init();
 }
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index bbeddf9ddcb1..ce2ec3298930 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -81,10 +81,9 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
  * machine specific initialisation.
  */
 
-void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size)
+void __init s3c2443_map_io(void)
 {
 	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
-	iotable_init(mach_desc, mach_size);
 }
 
 /* need to register class before we actually register the device, and
diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
new file mode 100644
index 000000000000..f0ef0ab475f6
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C24XX_PA_UART
+		ldrne	\rx, = S3C24XX_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s3c24a0/include/mach/irqs.h b/arch/arm/mach-s3c24a0/include/mach/irqs.h
new file mode 100644
index 000000000000..ae8c0e359783
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/irqs.h
@@ -0,0 +1,115 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/irqs.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef __ASM_ARCH_24A0_IRQS_H
+#define __ASM_ARCH_24A0_IRQS_H __FILE__
+
+#define IRQ_EINT0t2	S3C2410_IRQ(0)	/* 16 */
+/* for generic entry-macro.S */
+#define IRQ_EINT0	IRQ_EINT0t2
+
+#define IRQ_EINT3t6	S3C2410_IRQ(1)
+#define IRQ_EINT7t10	S3C2410_IRQ(2)
+#define IRQ_EINT11t14	S3C2410_IRQ(3)
+#define IRQ_EINT15t18	S3C2410_IRQ(4)	/* 20 */
+#define IRQ_TICK	S3C2410_IRQ(5)
+#define IRQ_DCTQ	S3C2410_IRQ(6)
+#define IRQ_MC		S3C2410_IRQ(7)
+#define IRQ_ME		S3C2410_IRQ(8)	/* 24 */
+#define IRQ_KEYPAD	S3C2410_IRQ(9)
+#define IRQ_TIMER0	S3C2410_IRQ(10)
+#define IRQ_TIMER1	S3C2410_IRQ(11)
+#define IRQ_TIMER2	S3C2410_IRQ(12)
+#define IRQ_TIMER3_4	S3C2410_IRQ(13)
+#define IRQ_OS_TIMER	IRQ_TIMER3_4
+#define IRQ_LCD		S3C2410_IRQ(14)
+#define IRQ_CAM_C	S3C2410_IRQ(15)
+#define IRQ_WDT_BATFLT	S3C2410_IRQ(16)	/* 32 */
+#define IRQ_UART0	S3C2410_IRQ(17)
+#define IRQ_CAM_P	S3C2410_IRQ(18)
+#define IRQ_MODEM	S3C2410_IRQ(19)
+#define IRQ_DMA		S3C2410_IRQ(20)
+#define IRQ_SDI		S3C2410_IRQ(21)
+#define IRQ_SPI0	S3C2410_IRQ(22)
+#define IRQ_UART1	S3C2410_IRQ(23)
+#define IRQ_AC97_NFLASH	S3C2410_IRQ(24)	/* 40 */
+#define IRQ_USBD	S3C2410_IRQ(25)
+#define IRQ_USBH	S3C2410_IRQ(26)
+#define IRQ_IIC		S3C2410_IRQ(27)
+#define IRQ_IRDA_MSTICK	S3C2410_IRQ(28)	/* 44 */
+#define IRQ_VLX_SPI1	S3C2410_IRQ(29)
+#define IRQ_RTC		S3C2410_IRQ(30)	/* 46 */
+#define IRQ_ADC_PEN     S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT00	S3C2410_IRQ(32)	/* 48 */
+#define IRQ_EINT1	S3C2410_IRQ(33)
+#define IRQ_EINT2	S3C2410_IRQ(34)
+#define IRQ_EINT3	S3C2410_IRQ(35)
+#define IRQ_EINT4	S3C2410_IRQ(36)
+#define IRQ_EINT5	S3C2410_IRQ(37)
+#define IRQ_EINT6	S3C2410_IRQ(38)
+#define IRQ_EINT7	S3C2410_IRQ(39)
+#define IRQ_EINT8	S3C2410_IRQ(40)
+#define IRQ_EINT9	S3C2410_IRQ(41)
+#define IRQ_EINT10	S3C2410_IRQ(42)
+#define IRQ_EINT11	S3C2410_IRQ(43)
+#define IRQ_EINT12	S3C2410_IRQ(44)
+#define IRQ_EINT13	S3C2410_IRQ(45)
+#define IRQ_EINT14	S3C2410_IRQ(46)
+#define IRQ_EINT15	S3C2410_IRQ(47)
+#define IRQ_EINT16	S3C2410_IRQ(48)
+#define IRQ_EINT17	S3C2410_IRQ(49)
+#define IRQ_EINT18	S3C2410_IRQ(50)
+
+/* SUB IRQS */
+#define IRQ_S3CUART_RX0		S3C2410_IRQ(51)	/* 67 */
+#define IRQ_S3CUART_TX0		S3C2410_IRQ(52)
+#define IRQ_S3CUART_ERR0	S3C2410_IRQ(53)
+
+#define IRQ_S3CUART_RX1		S3C2410_IRQ(54)
+#define IRQ_S3CUART_TX1		S3C2410_IRQ(55)
+#define IRQ_S3CUART_ERR1	S3C2410_IRQ(56)
+
+#define IRQ_S3CUART_RX2		(0x0)
+#define IRQ_S3CUART_TX2		(0x0)
+#define IRQ_S3CUART_ERR2	(0x0)
+
+
+#define IRQ_IRDA	S3C2410_IRQ(57)
+#define IRQ_MSTICK	S3C2410_IRQ(58)
+#define IRQ_RESERVED0	S3C2410_IRQ(59)
+#define IRQ_RESERVED1	S3C2410_IRQ(60)
+#define IRQ_RESERVED2	S3C2410_IRQ(61)
+#define IRQ_TIMER3	S3C2410_IRQ(62)
+#define IRQ_TIMER4	S3C2410_IRQ(63)
+#define IRQ_WDT		S3C2410_IRQ(64)
+#define IRQ_BATFLT	S3C2410_IRQ(65)
+#define IRQ_POST	S3C2410_IRQ(66)
+#define IRQ_DISP_FIFO	S3C2410_IRQ(67)
+#define IRQ_PENUP	S3C2410_IRQ(68)
+#define IRQ_PENDN	S3C2410_IRQ(69)
+#define IRQ_ADC		S3C2410_IRQ(70)
+#define IRQ_DISP_FRAME	S3C2410_IRQ(71)
+#define IRQ_NFLASH	S3C2410_IRQ(72)
+#define IRQ_AC97	S3C2410_IRQ(73)
+#define IRQ_SPI1	S3C2410_IRQ(74)
+#define IRQ_VLX		S3C2410_IRQ(75)
+#define IRQ_DMA0	S3C2410_IRQ(76)
+#define IRQ_DMA1	S3C2410_IRQ(77)
+#define IRQ_DMA2	S3C2410_IRQ(78)
+#define IRQ_DMA3	S3C2410_IRQ(79)
+
+#define IRQ_TC		(0x0)
+
+#define NR_IRQS		(IRQ_DMA3+1)
+
+#endif /* __ASM_ARCH_24A0_IRQS_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
new file mode 100644
index 000000000000..a01132717e34
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -0,0 +1,85 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/map.h
+ *
+ * Copyright 2003,2007  Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24A0 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_24A0_MAP_H
+#define __ASM_ARCH_24A0_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map.h>
+
+#define S3C24A0_PA_IO_BASE	(0x40000000)
+#define S3C24A0_PA_CLKPWR	(0x40000000)
+#define S3C24A0_PA_IRQ		(0x40200000)
+#define S3C24A0_PA_DMA		(0x40400000)
+#define S3C24A0_PA_MEMCTRL	(0x40C00000)
+#define S3C24A0_PA_NAND		(0x40C00000)
+#define S3C24A0_PA_SROM		(0x40C20000)
+#define S3C24A0_PA_SDRAM	(0x40C40000)
+#define S3C24A0_PA_BUSM		(0x40CE0000)
+#define S3C24A0_PA_USBHOST	(0x41000000)
+#define S3C24A0_PA_MODEMIF	(0x41180000)
+#define S3C24A0_PA_IRDA		(0x41800000)
+#define S3C24A0_PA_TIMER	(0x44000000)
+#define S3C24A0_PA_WATCHDOG	(0x44100000)
+#define S3C24A0_PA_RTC		(0x44200000)
+#define S3C24A0_PA_UART		(0x44400000)
+#define S3C24A0_PA_UART0	(S3C24A0_PA_UART)
+#define S3C24A0_PA_UART1	(S3C24A0_PA_UART + 0x4000)
+#define S3C24A0_PA_SPI		(0x44500000)
+#define S3C24A0_PA_IIC		(0x44600000)
+#define S3C24A0_PA_IIS		(0x44700000)
+#define S3C24A0_PA_GPIO		(0x44800000)
+#define S3C24A0_PA_KEYIF	(0x44900000)
+#define S3C24A0_PA_USBDEV	(0x44A00000)
+#define S3C24A0_PA_AC97		(0x45000000)
+#define S3C24A0_PA_ADC		(0x45800000)
+#define S3C24A0_PA_SDI		(0x46000000)
+#define S3C24A0_PA_MS		(0x46100000)
+#define S3C24A0_PA_LCD		(0x4A000000)
+#define S3C24A0_PA_VPOST	(0x4A100000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C24A0_CS0	(0x00000000)
+#define S3C24A0_CS1	(0x04000000)
+#define S3C24A0_CS2	(0x08000000)
+#define S3C24A0_CS3	(0x0C000000)
+#define S3C24A0_CS4	(0x10000000)
+#define S3C24A0_CS5	(0x40000000)
+
+#define S3C24A0_SDRAM_PA	(S3C24A0_CS4)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ		S3C24A0_PA_IRQ
+#define S3C24XX_PA_MEMCTRL	S3C24A0_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST	S3C24A0_PA_USBHOST
+#define S3C24XX_PA_DMA		S3C24A0_PA_DMA
+#define S3C24XX_PA_CLKPWR	S3C24A0_PA_CLKPWR
+#define S3C24XX_PA_LCD		S3C24A0_PA_LCD
+#define S3C24XX_PA_UART		S3C24A0_PA_UART
+#define S3C24XX_PA_TIMER	S3C24A0_PA_TIMER
+#define S3C24XX_PA_USBDEV	S3C24A0_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG	S3C24A0_PA_WATCHDOG
+#define S3C24XX_PA_IIS		S3C24A0_PA_IIS
+#define S3C24XX_PA_GPIO		S3C24A0_PA_GPIO
+#define S3C24XX_PA_RTC		S3C24A0_PA_RTC
+#define S3C24XX_PA_ADC		S3C24A0_PA_ADC
+#define S3C24XX_PA_SPI		S3C24A0_PA_SPI
+#define S3C24XX_PA_SDI		S3C24A0_PA_SDI
+#define S3C24XX_PA_NAND		S3C24A0_PA_NAND
+
+#define S3C_PA_UART		S3C24A0_PA_UART
+#define S3C_PA_IIC		S3C24A0_PA_IIC
+
+#endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/memory.h b/arch/arm/mach-s3c24a0/include/mach/memory.h
new file mode 100644
index 000000000000..585211ca0187
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/memory.h
+ *  from linux/include/asm-arm/arch-rpc/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_24A0_MEMORY_H
+#define __ASM_ARCH_24A0_MEMORY_H __FILE__
+
+#define PHYS_OFFSET UL(0x10000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
new file mode 100644
index 000000000000..af2abd756c30
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
@@ -0,0 +1,88 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24A0 clock register definitions
+*/
+
+#ifndef __ASM_ARCH_24A0_REGS_CLOCK_H
+#define __ASM_ARCH_24A0_REGS_CLOCK_H __FILE__
+
+#define S3C24A0_MPLLCON		S3C2410_CLKREG(0x10)
+#define S3C24A0_UPLLCON		S3C2410_CLKREG(0x14)
+#define S3C24A0_CLKCON		S3C2410_CLKREG(0x20)
+#define S3C24A0_CLKSRC		S3C2410_CLKREG(0x24)
+#define S3C24A0_CLKDIVN		S3C2410_CLKREG(0x28)
+
+/* CLKCON register bits */
+
+#define S3C24A0_CLKCON_VLX	(1<<29)
+#define S3C24A0_CLKCON_VPOST	(1<<28)
+#define S3C24A0_CLKCON_WDT	(1<<27)	/* reserved */
+#define S3C24A0_CLKCON_MPEGDCTQ	(1<<26)
+#define S3C24A0_CLKCON_VPOSTIF	(1<<25)
+#define S3C24A0_CLKCON_MPEG4IF	(1<<24)
+#define S3C24A0_CLKCON_CAM_UPLL	(1<<23)
+#define S3C24A0_CLKCON_LCDC	(1<<22)
+#define S3C24A0_CLKCON_CAM_HCLK	(1<<21)
+#define S3C24A0_CLKCON_MPEG4	(1<<20)
+#define S3C24A0_CLKCON_KEYPAD	(1<<19)
+#define S3C24A0_CLKCON_ADC	(1<<18)
+#define S3C24A0_CLKCON_SDI	(1<<17)
+#define S3C24A0_CLKCON_MS	(1<<16) /* memory stick */
+#define S3C24A0_CLKCON_USBD	(1<<15)
+#define S3C24A0_CLKCON_GPIO	(1<<14)
+#define S3C24A0_CLKCON_IIS	(1<<13)
+#define S3C24A0_CLKCON_IIC	(1<<12)
+#define S3C24A0_CLKCON_SPI	(1<<11)
+#define S3C24A0_CLKCON_UART1	(1<<10)
+#define S3C24A0_CLKCON_UART0	(1<<9)
+#define S3C24A0_CLKCON_PWMT	(1<<8)
+#define S3C24A0_CLKCON_USBH	(1<<7)
+#define S3C24A0_CLKCON_AC97	(1<<6)
+#define S3C24A0_CLKCON_IrDA	(1<<4)
+#define S3C24A0_CLKCON_IDLE	(1<<2)
+#define S3C24A0_CLKCON_MON	(1<<1)
+#define S3C24A0_CLKCON_STOP	(1<<0)
+
+/* CLKSRC register bits */
+
+#define S3C24A0_CLKSRC_OSC	(1<<8)  /* CLKSRC */
+#define S3C24A0_CLKSRC_UPLL	(1<<7)
+#define S3C24A0_CLKSRC_MPLL	(1<<5)
+#define S3C24A0_CLKSRC_EXT	(1<<4)
+
+/* Use a single interface with the common code, for s3c24xx */
+
+#define S3C2410_MPLLCON		S3C24A0_MPLLCON
+#define S3C2410_UPLLCON		S3C24A0_UPLLCON
+#define S3C2410_CLKCON		S3C24A0_CLKCON
+#define S3C2410_CLKSLOW		S3C24A0_CLKSRC
+#define S3C2410_CLKDIVN		S3C24A0_CLKDIVN
+
+#define S3C2410_CLKCON_IDLE	S3C24A0_CLKCON_IDLE
+#define S3C2410_CLKCON_POWER	S3C24A0_CLKCON_STOP
+#define S3C2410_CLKCON_LCDC	S3C24A0_CLKCON_LCDC
+#define S3C2410_CLKCON_USBH	S3C24A0_CLKCON_USBH
+#define S3C2410_CLKCON_USBD	S3C24A0_CLKCON_USBD
+#define S3C2410_CLKCON_PWMT	S3C24A0_CLKCON_PWMT
+#define S3C2410_CLKCON_SDI	S3C24A0_CLKCON_SDI
+#define S3C2410_CLKCON_UART0	S3C24A0_CLKCON_UART0
+#define S3C2410_CLKCON_UART1	S3C24A0_CLKCON_UART1
+#define S3C2410_CLKCON_GPIO	S3C24A0_CLKCON_GPIO
+#define S3C2410_CLKCON_ADC	S3C24A0_CLKCON_ADC
+#define S3C2410_CLKCON_IIC	S3C24A0_CLKCON_IIC
+#define S3C2410_CLKCON_IIS	S3C24A0_CLKCON_IIS
+#define S3C2410_CLKCON_SPI	S3C24A0_CLKCON_SPI
+
+#define S3C2410_CLKSLOW_UCLK_OFF	S3C24A0_CLKSRC_UPLL
+#define S3C2410_CLKSLOW_MPLL_OFF	S3C24A0_CLKSRC_MPLL
+#define S3C2410_CLKSLOW_SLOW		(0xFF)
+#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	(0x1)
+
+#endif /* __ASM_ARCH_24A0_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-irq.h b/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
new file mode 100644
index 000000000000..6086f6f189eb
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef ___ASM_ARCH_24A0_REGS_IRQ_H
+#define ___ASM_ARCH_24A0_REGS_IRQ_H __FILE__
+
+
+#define S3C2410_EINTMASK	S3C2410_EINTREG(0x034)
+#define S3C2410_EINTPEND	S3C2410_EINTREG(0X038)
+
+#define S3C24XX_EINTMASK	S3C24XX_EINTREG(0x034)
+#define S3C24XX_EINTPEND	S3C24XX_EINTREG(0X038)
+
+#endif /* __ASM_ARCH_24A0_REGS_IRQ_H */
+
+
+
diff --git a/arch/arm/mach-s3c24a0/include/mach/system.h b/arch/arm/mach-s3c24a0/include/mach/system.h
new file mode 100644
index 000000000000..bd1bd1957656
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/system.h
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/system.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24A0 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <mach/map.h>
+
+static void arch_idle(void)
+{
+	/* currently no specific idle support. */
+}
+
+void (*s3c24xx_reset_hook)(void);
+
+#include <asm/plat-s3c24xx/system-reset.h>
diff --git a/arch/arm/mach-s3c24a0/include/mach/tick.h b/arch/arm/mach-s3c24a0/include/mach/tick.h
new file mode 100644
index 000000000000..9dea8ba6fb72
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/tick.h
@@ -0,0 +1,15 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/tick.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C24A0 - timer tick support
+ */
+
+#define SUBSRC_TIMER4	(1 << (IRQ_TIMER4 - IRQ_S3CUART_RX0))
+
+static inline int s3c24xx_ostimer_pending(void)
+{
+	return __raw_readl(S3C2410_SUBSRCPND) & SUBSRC_TIMER4;
+}
diff --git a/arch/arm/mach-s3c24a0/include/mach/timex.h b/arch/arm/mach-s3c24a0/include/mach/timex.h
new file mode 100644
index 000000000000..98573424a016
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/timex.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/timex.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
new file mode 100644
index 000000000000..4d4fe4849589
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* linux/include/asm-arm/arch-s3c24ao/vmalloc.h
+ *
+ * Copyright 2008 Simtec Electronics <linux@simtec.co.uk>
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24A0 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
new file mode 100644
index 000000000000..6da82b5c09ba
--- /dev/null
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -0,0 +1,8 @@
+# arch/arm/mach-s3c6400/Kconfig
+#
+# Copyright 2008 Openmoko, Inc.
+#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+#
+# Licensed under GPLv2
+
+# Currently nothing here, this will be added later
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
new file mode 100644
index 000000000000..8f397db25b87
--- /dev/null
+++ b/arch/arm/mach-s3c6400/Makefile
@@ -0,0 +1,15 @@
+# arch/arm/mach-s3c6400/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S3C6400 system
+
+obj-n				+= blank.o
diff --git a/arch/arm/mach-s3c6400/Makefile.boot b/arch/arm/mach-s3c6400/Makefile.boot
new file mode 100644
index 000000000000..ba41fdc0a586
--- /dev/null
+++ b/arch/arm/mach-s3c6400/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x50008000
+params_phys-y	:= 0x50000100
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
new file mode 100644
index 000000000000..b18ac5266dfc
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
new file mode 100644
index 000000000000..9771ac2cb07e
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/dma.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/entry-macro.S b/arch/arm/mach-s3c6400/include/mach/entry-macro.S
new file mode 100644
index 000000000000..fbd90d2cf355
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/entry-macro.S
@@ -0,0 +1,44 @@
+/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Low-level IRQ helper macros for the Samsung S3C64XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =S3C_VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S3C_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio-core.h b/arch/arm/mach-s3c6400/include/mach/gpio-core.h
new file mode 100644
index 000000000000..d89aae68b0a5
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/gpio-core.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s3c6400/include/mach/gpio-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio.h b/arch/arm/mach-s3c6400/include/mach/gpio.h
new file mode 100644
index 000000000000..e8e35e8fe731
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/gpio.h
@@ -0,0 +1,96 @@
+/* arch/arm/mach-s3c6400/include/mach/gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S3C64XX_GPIO_A_NR	(8)
+#define S3C64XX_GPIO_B_NR	(7)
+#define S3C64XX_GPIO_C_NR	(8)
+#define S3C64XX_GPIO_D_NR	(5)
+#define S3C64XX_GPIO_E_NR	(5)
+#define S3C64XX_GPIO_F_NR	(16)
+#define S3C64XX_GPIO_G_NR	(7)
+#define S3C64XX_GPIO_H_NR	(10)
+#define S3C64XX_GPIO_I_NR	(16)
+#define S3C64XX_GPIO_J_NR	(12)
+#define S3C64XX_GPIO_K_NR	(16)
+#define S3C64XX_GPIO_L_NR	(15)
+#define S3C64XX_GPIO_M_NR	(6)
+#define S3C64XX_GPIO_N_NR	(16)
+#define S3C64XX_GPIO_O_NR	(16)
+#define S3C64XX_GPIO_P_NR	(15)
+#define S3C64XX_GPIO_Q_NR	(9)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S3C64XX_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+	S3C64XX_GPIO_A_START = 0,
+	S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
+	S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
+	S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
+	S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
+	S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
+	S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
+	S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
+	S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
+	S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
+	S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
+	S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
+	S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
+	S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
+	S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
+	S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
+	S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
+};
+
+/* S3C64XX GPIO number definitions. */
+
+#define S3C64XX_GPA(_nr)	(S3C64XX_GPIO_A_START + (_nr))
+#define S3C64XX_GPB(_nr)	(S3C64XX_GPIO_B_START + (_nr))
+#define S3C64XX_GPC(_nr)	(S3C64XX_GPIO_C_START + (_nr))
+#define S3C64XX_GPD(_nr)	(S3C64XX_GPIO_D_START + (_nr))
+#define S3C64XX_GPE(_nr)	(S3C64XX_GPIO_E_START + (_nr))
+#define S3C64XX_GPF(_nr)	(S3C64XX_GPIO_F_START + (_nr))
+#define S3C64XX_GPG(_nr)	(S3C64XX_GPIO_G_START + (_nr))
+#define S3C64XX_GPH(_nr)	(S3C64XX_GPIO_H_START + (_nr))
+#define S3C64XX_GPI(_nr)	(S3C64XX_GPIO_I_START + (_nr))
+#define S3C64XX_GPJ(_nr)	(S3C64XX_GPIO_J_START + (_nr))
+#define S3C64XX_GPK(_nr)	(S3C64XX_GPIO_K_START + (_nr))
+#define S3C64XX_GPL(_nr)	(S3C64XX_GPIO_L_START + (_nr))
+#define S3C64XX_GPM(_nr)	(S3C64XX_GPIO_M_START + (_nr))
+#define S3C64XX_GPN(_nr)	(S3C64XX_GPIO_N_START + (_nr))
+#define S3C64XX_GPO(_nr)	(S3C64XX_GPIO_O_START + (_nr))
+#define S3C64XX_GPP(_nr)	(S3C64XX_GPIO_P_START + (_nr))
+#define S3C64XX_GPQ(_nr)	(S3C64XX_GPIO_Q_START + (_nr))
+
+/* the end of the S3C64XX specific gpios */
+#define S3C64XX_GPIO_END	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define S3C_GPIO_END		S3C64XX_GPIO_END
+
+/* define the number of gpios we need to the one after the GPQ() range */
+#define ARCH_NR_GPIOS	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c6400/include/mach/hardware.h b/arch/arm/mach-s3c6400/include/mach/hardware.h
new file mode 100644
index 000000000000..862d033e57a4
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/hardware.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/irqs.h b/arch/arm/mach-s3c6400/include/mach/irqs.h
new file mode 100644
index 000000000000..b38c47cffc28
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/irqs.h
@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#ifndef __ASM_ARM_IRQ_H
+#error "Do not include this directly, instead #include <asm/irq.h>"
+#endif
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
new file mode 100644
index 000000000000..cff27d813fc6
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/map.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+/* HSMMC units */
+#define S3C64XX_PA_HSMMC(x)	(0x7C200000 + ((x) * 0x100000))
+#define S3C64XX_PA_HSMMC0	S3C64XX_PA_HSMMC(0)
+#define S3C64XX_PA_HSMMC1	S3C64XX_PA_HSMMC(1)
+#define S3C64XX_PA_HSMMC2	S3C64XX_PA_HSMMC(2)
+
+#define S3C_PA_UART		(0x7F005000)
+#define S3C_PA_UART0		(S3C_PA_UART + 0x00)
+#define S3C_PA_UART1		(S3C_PA_UART + 0x400)
+#define S3C_PA_UART2		(S3C_PA_UART + 0x800)
+#define S3C_PA_UART3		(S3C_PA_UART + 0xC00)
+#define S3C_UART_OFFSET		(0x400)
+
+/* See notes on UART VA mapping in debug-macro.S */
+#define S3C_VA_UARTx(x)	(S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
+
+#define S3C_VA_UART0		S3C_VA_UARTx(0)
+#define S3C_VA_UART1		S3C_VA_UARTx(1)
+#define S3C_VA_UART2		S3C_VA_UARTx(2)
+#define S3C_VA_UART3		S3C_VA_UARTx(3)
+
+#define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_TIMER	(0x7F006000)
+#define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_IIC1		(0x7F00F000)
+
+#define S3C64XX_PA_GPIO		(0x7F008000)
+#define S3C64XX_VA_GPIO		S3C_ADDR(0x00500000)
+#define S3C64XX_SZ_GPIO		SZ_4K
+
+#define S3C64XX_PA_SDRAM	(0x50000000)
+#define S3C64XX_PA_VIC0		(0x71200000)
+#define S3C64XX_PA_VIC1		(0x71300000)
+
+/* place VICs close together */
+#define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
+#define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
+
+/* compatibiltiy defines. */
+#define S3C_PA_TIMER		S3C64XX_PA_TIMER
+#define S3C_PA_HSMMC0		S3C64XX_PA_HSMMC0
+#define S3C_PA_HSMMC1		S3C64XX_PA_HSMMC1
+#define S3C_PA_HSMMC2		S3C64XX_PA_HSMMC2
+#define S3C_PA_IIC		S3C64XX_PA_IIC0
+#define S3C_PA_IIC1		S3C64XX_PA_IIC1
+#define S3C_PA_FB		S3C64XX_PA_FB
+
+#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/memory.h b/arch/arm/mach-s3c6400/include/mach/memory.h
new file mode 100644
index 000000000000..a3ac84a65480
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/memory.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c6400/include/mach/memory.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET     UL(0x50000000)
+
+#endif
diff --git a/arch/arm/mach-s3c6400/include/mach/pwm-clock.h b/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
new file mode 100644
index 000000000000..b25bedee0d52
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64xx - pwm clock and timer support
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
new file mode 100644
index 000000000000..47019795ce06
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
@@ -0,0 +1,259 @@
+/* arch/arm/mach-s3c6400/include/mach/regs-fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards and specifically the S3C64XX series
+ * S3C6400 and S3C6410.
+ *
+ * The file contains the cpu specific items which change between whichever
+ * architecture is selected. See <plat/regs-fb.h> for the core definitions
+ * that are the same.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* include the core definitions here, in case we really do need to
+ * override them at a later date.
+*/
+
+#include <plat/regs-fb.h>
+
+#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
+#define VIDCON1_FSTATUS_EVEN	(1 << 15)
+
+/* Video timing controls */
+#define VIDTCON0				(0x10)
+#define VIDTCON1				(0x14)
+#define VIDTCON2				(0x18)
+
+/* Window position controls */
+
+#define WINCON(_win)				(0x20 + ((_win) * 4))
+
+/* OSD1 and OSD4 do not have register D */
+
+#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
+#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
+#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
+#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
+
+/* Video buffer addresses */
+
+#define VIDW_BUF_START(_buff)			(0xA0 + ((_buff) * 8))
+#define VIDW_BUF_START1(_buff)			(0xA4 + ((_buff) * 8))
+#define VIDW_BUF_END(_buff)			(0xD0 + ((_buff) * 8))
+#define VIDW_BUF_END1(_buff)			(0xD4 + ((_buff) * 8))
+#define VIDW_BUF_SIZE(_buff)			(0x100 + ((_buff) * 4))
+
+#define VIDINTCON0				(0x130)
+
+#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
+
+/* WINCONx */
+
+#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
+#define WINCONx_CSCWIDTH_SHIFT			(26)
+#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
+#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
+
+#define WINCONx_ENLOCAL				(1 << 22)
+#define WINCONx_BUFSTATUS			(1 << 21)
+#define WINCONx_BUFSEL				(1 << 20)
+#define WINCONx_BUFAUTOEN			(1 << 19)
+#define WINCONx_YCbCr				(1 << 13)
+
+#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
+
+#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
+#define WINCON2_BLD_PIX				(1 << 6)
+
+#define WINCON2_ALPHA_SEL			(1 << 1)
+#define WINCON2_BPPMODE_MASK			(0xf << 2)
+#define WINCON2_BPPMODE_SHIFT			(2)
+#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
+#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define WINCON3_BLD_PIX				(1 << 6)
+
+#define WINCON3_ALPHA_SEL			(1 << 1)
+#define WINCON3_BPPMODE_MASK			(0xf << 2)
+#define WINCON3_BPPMODE_SHIFT			(2)
+#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
+
+#define DITHMODE				(0x170)
+#define WINxMAP(_win)				(0x180 + ((_win) * 4))
+
+
+#define DITHMODE_R_POS_MASK			(0x3 << 5)
+#define DITHMODE_R_POS_SHIFT			(5)
+#define DITHMODE_R_POS_8BIT			(0x0 << 5)
+#define DITHMODE_R_POS_6BIT			(0x1 << 5)
+#define DITHMODE_R_POS_5BIT			(0x2 << 5)
+
+#define DITHMODE_G_POS_MASK			(0x3 << 3)
+#define DITHMODE_G_POS_SHIFT			(3)
+#define DITHMODE_G_POS_8BIT			(0x0 << 3)
+#define DITHMODE_G_POS_6BIT			(0x1 << 3)
+#define DITHMODE_G_POS_5BIT			(0x2 << 3)
+
+#define DITHMODE_B_POS_MASK			(0x3 << 1)
+#define DITHMODE_B_POS_SHIFT			(1)
+#define DITHMODE_B_POS_8BIT			(0x0 << 1)
+#define DITHMODE_B_POS_6BIT			(0x1 << 1)
+#define DITHMODE_B_POS_5BIT			(0x2 << 1)
+
+#define DITHMODE_DITH_EN			(1 << 0)
+
+#define WPALCON					(0x1A0)
+
+#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
+#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
+#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
+
+/* Palette registers */
+
+#define WIN2_PAL(_entry)			(0x300 + ((_entry) * 2))
+#define WIN3_PAL(_entry)			(0x320 + ((_entry) * 2))
+#define WIN4_PAL(_entry)			(0x340 + ((_entry) * 2))
+#define WIN0_PAL(_entry)			(0x400 + ((_entry) * 4))
+#define WIN1_PAL(_entry)			(0x800 + ((_entry) * 4))
+
+/* system specific implementation code for palette sizes, and other
+ * information that changes depending on which architecture is being
+ * compiled.
+*/
+
+/* return true if window _win has OSD register D */
+#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
+
+static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
+{
+	if (win < 2)
+		return 256;
+	if (win < 4)
+		return 16;
+	if (win == 4)
+		return 4;
+
+	BUG();	/* shouldn't get here */
+}
+
+static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
+{
+	/* all windows can do 1/2 bpp */
+
+	if ((bpp == 25 || bpp == 19) && win == 0)
+		return 0;	/* win 0 does not have 19 or 25bpp modes */
+
+	if (bpp == 4 && win == 4)
+		return 0;
+
+	if (bpp == 8 && (win >= 3))
+		return 0;	/* win 3/4 cannot do 8bpp in any mode */
+
+	return 1;
+}
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+	switch (window) {
+	case 0: return WIN0_PAL(reg);
+	case 1: return WIN1_PAL(reg);
+	case 2: return WIN2_PAL(reg);
+	case 3: return WIN3_PAL(reg);
+	case 4: return WIN4_PAL(reg);
+	}
+
+	BUG();
+}
+
+static inline int s3c_fb_pal_is16(unsigned int window)
+{
+	return window > 1;
+}
+
+struct s3c_fb_palette {
+	struct fb_bitfield	r;
+	struct fb_bitfield	g;
+	struct fb_bitfield	b;
+	struct fb_bitfield	a;
+};
+
+static inline void s3c_fb_init_palette(unsigned int window,
+				       struct s3c_fb_palette *palette)
+{
+	if (window < 2) {
+		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
+		palette->r.offset = 16;
+		palette->r.length = 8;
+		palette->g.offset = 8;
+		palette->g.length = 8;
+		palette->b.offset = 0;
+		palette->b.length = 8;
+	} else {
+		/* currently we assume RGB 5/6/5 */
+		palette->r.offset = 11;
+		palette->r.length = 5;
+		palette->g.offset = 5;
+		palette->g.length = 6;
+		palette->b.offset = 0;
+		palette->b.length = 5;
+	}
+}
+
+/* Notes on per-window bpp settings
+ *
+ * Value	Win0	 Win1	  Win2	   Win3	    Win 4
+ * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
+ * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
+ * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
+ * 0011		8(P)	 8(P)     -none-   -none-   -none-
+ * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
+ * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
+ * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
+ * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
+ * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
+ * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
+ * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
+ * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
+ * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
+ * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
+ * 1110		-none-	 -none-	  -none-   -none-    -none-
+ * 1111		-none-	 -none-   -none-   -none-    -none-
+*/
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-irq.h b/arch/arm/mach-s3c6400/include/mach/regs-irq.h
new file mode 100644
index 000000000000..bcce68a0bb75
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/regs-irq.h
@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+
+#endif /* __ASM_ARCH_6400_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h
new file mode 100644
index 000000000000..652bbc403f0b
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/system.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/system.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - system implementation
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/tick.h b/arch/arm/mach-s3c6400/include/mach/tick.h
new file mode 100644
index 000000000000..d9c0dc7014ec
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+	return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_6400_TICK_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/uncompress.h b/arch/arm/mach-s3c6400/include/mach/uncompress.h
new file mode 100644
index 000000000000..c6a82a20bf2a
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s3c6400/include/mach/uncompress.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+	fifo_mask = S3C2440_UFSTAT_TXMASK;
+	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
new file mode 100644
index 000000000000..1d5010070027
--- /dev/null
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -0,0 +1,62 @@
+# arch/arm/mach-s3c6410/Kconfig
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6410
+	bool
+	select CPU_S3C6400_INIT
+	select CPU_S3C6400_CLOCK
+	help
+	  Enable S3C6410 CPU support
+
+config S3C6410_SETUP_SDHCI
+	bool
+	help
+	  Internal helper functions for S3C6410 based SDHCI systems
+
+config MACH_SMDK6410
+	bool "SMDK6410"
+	select CPU_S3C6410
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_I2C1
+	select S3C_DEV_FB
+	select S3C6410_SETUP_SDHCI
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+	prompt "SMDK6410 MMC/SD slot setup"
+	depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+	bool "Use channel 0 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON7 (channel 0) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+       
+config SMDK6410_SD_CH1
+	bool "Use channel 1 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON6 (channel 1) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+endchoice
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
new file mode 100644
index 000000000000..2cd4f189036b
--- /dev/null
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -0,0 +1,23 @@
+# arch/arm/plat-s3c6410/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S3C6410 system
+
+obj-$(CONFIG_CPU_S3C6410)	+= cpu.o
+
+# Helper and device support
+
+obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
new file mode 100644
index 000000000000..6a73ca6b7a3a
--- /dev/null
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -0,0 +1,101 @@
+/* linux/arch/arm/mach-s3c6410/cpu.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s3c6410_iodesc[] __initdata = {
+};
+
+/* s3c6410_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s3c6410_map_io(void)
+{
+	iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc));
+
+	/* initialise device information early */
+	s3c6410_default_sdhci0();
+	s3c6410_default_sdhci1();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+}
+
+void __init s3c6410_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c24xx_register_baseclocks(xtal);
+	s3c64xx_register_clocks();
+	s3c6400_register_clocks();
+	s3c6400_setup_clocks();
+}
+
+void __init s3c6410_init_irq(void)
+{
+	/* VIC0 is missing IRQ7, VIC1 is fully populated. */
+	s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
+}
+
+struct sysdev_class s3c6410_sysclass = {
+	.name	= "s3c6410-core",
+};
+
+static struct sys_device s3c6410_sysdev = {
+	.cls	= &s3c6410_sysclass,
+};
+
+static int __init s3c6410_core_init(void)
+{
+	return sysdev_class_register(&s3c6410_sysclass);
+}
+
+core_initcall(s3c6410_core_init);
+
+int __init s3c6410_init(void)
+{
+	printk("S3C6410: Initialising architecture\n");
+
+	return sysdev_register(&s3c6410_sysdev);
+}
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
new file mode 100644
index 000000000000..3c4d47145c83
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -0,0 +1,185 @@
+/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+/* framebuffer and LCD setup. */
+
+/* GPF15 = LCD backlight control
+ * GPF13 => Panel power
+ * GPN5 = LCD nRESET signal
+ * PWM_TOUT1 => backlight brightness
+ */
+
+static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+		gpio_direction_output(S3C64XX_GPF(13), 1);
+		gpio_direction_output(S3C64XX_GPF(15), 1);
+
+		/* fire nRESET on power up */
+		gpio_direction_output(S3C64XX_GPN(5), 0);
+		msleep(10);
+		gpio_direction_output(S3C64XX_GPN(5), 1);
+		msleep(1);
+	} else {
+		gpio_direction_output(S3C64XX_GPF(15), 0);
+		gpio_direction_output(S3C64XX_GPF(13), 0);
+	}
+}
+
+static struct plat_lcd_data smdk6410_lcd_power_data = {
+	.set_power	= smdk6410_lcd_power_set,
+};
+
+static struct platform_device smdk6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win smdk6410_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &smdk6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+struct map_desc smdk6410_iodesc[] = {};
+
+static struct platform_device *smdk6410_devices[] __initdata = {
+#ifdef CONFIG_SMDK6410_SD_CH0
+	&s3c_device_hsmmc0,
+#endif
+#ifdef CONFIG_SMDK6410_SD_CH1
+	&s3c_device_hsmmc1,
+#endif
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_fb,
+	&smdk6410_lcd_powerdev,
+};
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+	{ I2C_BOARD_INFO("WM8580", 0X1b), },
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
+};
+
+static void __init smdk6410_map_io(void)
+{
+	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+}
+
+static void __init smdk6410_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+
+	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
+}
+
+MACHINE_START(SMDK6410, "SMDK6410")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= smdk6410_map_io,
+	.init_machine	= smdk6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
new file mode 100644
index 000000000000..0b5788bd5985
--- /dev/null
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -0,0 +1,102 @@
+/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c6410_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	[2] = "mmc_bus",
+	/* [3] = "48m", - note not succesfully used yet */
+};
+
+void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPG(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+}
+
+void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
+				    void __iomem *r,
+				    struct mmc_ios *ios,
+				    struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	/* don't need to alter anything acording to card-type */
+
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
+void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index 43c30f84abf2..dab3c6347a8f 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -3,6 +3,7 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/device.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
@@ -14,36 +15,39 @@
 #include <mach/hardware.h>
 
 /*
- * Very simple clock implementation - we only have one clock to
- * deal with at the moment, so we only match using the "name".
+ * Very simple clock implementation - we only have one clock to deal with.
  */
 struct clk {
-	struct list_head	node;
-	unsigned long		rate;
-	const char		*name;
 	unsigned int		enabled;
-	void			(*enable)(void);
-	void			(*disable)(void);
 };
 
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
+static void clk_gpio27_enable(void)
+{
+	/*
+	 * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
+	 * (SA-1110 Developer's Manual, section 9.1.2.1)
+	 */
+	GAFR |= GPIO_32_768kHz;
+	GPDR |= GPIO_32_768kHz;
+	TUCR = TUCR_3_6864MHz;
+}
+
+static void clk_gpio27_disable(void)
+{
+	TUCR = 0;
+	GPDR &= ~GPIO_32_768kHz;
+	GAFR &= ~GPIO_32_768kHz;
+}
+
+static struct clk clk_gpio27;
+
 static DEFINE_SPINLOCK(clocks_lock);
 
 struct clk *clk_get(struct device *dev, const char *id)
 {
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0) {
-			clk = p;
-			break;
-		}
-	}
-	mutex_unlock(&clocks_mutex);
+	const char *devname = dev_name(dev);
 
-	return clk;
+	return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27;
 }
 EXPORT_SYMBOL(clk_get);
 
@@ -58,7 +62,7 @@ int clk_enable(struct clk *clk)
 
 	spin_lock_irqsave(&clocks_lock, flags);
 	if (clk->enabled++ == 0)
-		clk->enable();
+		clk_gpio27_enable();
 	spin_unlock_irqrestore(&clocks_lock, flags);
 	return 0;
 }
@@ -72,63 +76,13 @@ void clk_disable(struct clk *clk)
 
 	spin_lock_irqsave(&clocks_lock, flags);
 	if (--clk->enabled == 0)
-		clk->disable();
+		clk_gpio27_disable();
 	spin_unlock_irqrestore(&clocks_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
 unsigned long clk_get_rate(struct clk *clk)
 {
-	return clk->rate;
+	return 3686400;
 }
 EXPORT_SYMBOL(clk_get_rate);
-
-
-static void clk_gpio27_enable(void)
-{
-	/*
-	 * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
-	 * (SA-1110 Developer's Manual, section 9.1.2.1)
-	 */
-	GAFR |= GPIO_32_768kHz;
-	GPDR |= GPIO_32_768kHz;
-	TUCR = TUCR_3_6864MHz;
-}
-
-static void clk_gpio27_disable(void)
-{
-	TUCR = 0;
-	GPDR &= ~GPIO_32_768kHz;
-	GAFR &= ~GPIO_32_768kHz;
-}
-
-static struct clk clk_gpio27 = {
-	.name		= "SA1111_CLK",
-	.rate		= 3686400,
-	.enable		= clk_gpio27_enable,
-	.disable	= clk_gpio27_disable,
-};
-
-int clk_register(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-static int __init clk_init(void)
-{
-	clk_register(&clk_gpio27);
-	return 0;
-}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index fe289997cfaf..2052eb88c961 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -68,23 +68,22 @@ struct platform_device colliescoop_device = {
 };
 
 static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
-{
-       .dev        = &colliescoop_device.dev,
-       .irq        = COLLIE_IRQ_GPIO_CF_IRQ,
-       .cd_irq     = COLLIE_IRQ_GPIO_CF_CD,
-       .cd_irq_str = "PCMCIA0 CD",
-},
+	{
+	.dev		= &colliescoop_device.dev,
+	.irq		= COLLIE_IRQ_GPIO_CF_IRQ,
+	.cd_irq		= COLLIE_IRQ_GPIO_CF_CD,
+	.cd_irq_str	= "PCMCIA0 CD",
+	},
 };
 
 static struct scoop_pcmcia_config collie_pcmcia_config = {
-	.devs         = &collie_pcmcia_scoop[0],
-	.num_devs     = 1,
+	.devs		= &collie_pcmcia_scoop[0],
+	.num_devs	= 1,
 };
 
-
 static struct mcp_plat_data collie_mcp_data = {
-	.mccr0          = MCCR0_ADM | MCCR0_ExtClk,
-	.sclk_rate      = 9216000,
+	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
+	.sclk_rate	= 9216000,
 };
 
 #ifdef CONFIG_SHARP_LOCOMO
@@ -95,14 +94,14 @@ struct platform_device collie_locomo_device;
 
 static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
 {
- 	if (mctrl & TIOCM_RTS)
+	if (mctrl & TIOCM_RTS)
 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
- 	else
+	else
 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
 
- 	if (mctrl & TIOCM_DTR)
+	if (mctrl & TIOCM_DTR)
 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
- 	else
+	else
 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
 }
 
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index b1161fc80602..b39307f26b52 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -26,7 +26,7 @@
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
 #include <mach/collie.h>
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/sharpsl_pm.h>
@@ -263,24 +263,24 @@ static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev)
 }
 
 static struct ucb1x00_driver collie_pm_ucb_driver = {
-	.add            = collie_pm_ucb_add,
+	.add	= collie_pm_ucb_add,
 };
 
 static struct platform_device *collie_pm_device;
 
 static int __init collie_pm_init(void)
 {
-        int ret;
+	int ret;
 
-        collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
-        if (!collie_pm_device)
-                return -ENOMEM;
+	collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
+	if (!collie_pm_device)
+		return -ENOMEM;
 
-        collie_pm_device->dev.platform_data = &collie_pm_machinfo;
-        ret = platform_device_add(collie_pm_device);
+	collie_pm_device->dev.platform_data = &collie_pm_machinfo;
+	ret = platform_device_add(collie_pm_device);
 
-        if (ret)
-                platform_device_put(collie_pm_device);
+	if (ret)
+		platform_device_put(collie_pm_device);
 
 	if (!ret)
 		ret = ucb1x00_register_driver(&collie_pm_ucb_driver);
@@ -291,7 +291,7 @@ static int __init collie_pm_init(void)
 static void __exit collie_pm_exit(void)
 {
 	ucb1x00_unregister_driver(&collie_pm_ucb_driver);
-        platform_device_unregister(collie_pm_device);
+	platform_device_unregister(collie_pm_device);
 }
 
 module_init(collie_pm_init);
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index 244d5956312c..ef817876a5d6 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -3,17 +3,17 @@
  *
  * Copyright (C) 2000 2001, The Delft University of Technology
  *
- * Authors: 
+ * Authors:
  * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
  * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
  *   - major rewrite for linux-2.3.99
- *   - rewritten for the more generic power management scheme in 
+ *   - rewritten for the more generic power management scheme in
  *     linux-2.4.5-rmk1
  *
  * This software has been developed while working on the LART
  * computing board (http://www.lartmaker.nl/), which is
  * sponsored by the Mobile Multi-media Communications
- * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications 
+ * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications
  * (http://www.ubicom.tudelft.nl/) projects.
  *
  * The authors can be reached at:
@@ -36,7 +36,7 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
@@ -44,7 +44,7 @@
  *
  * Theory of operations
  * ====================
- * 
+ *
  * Clock scaling can be used to lower the power consumption of the CPU
  * core. This will give you a somewhat longer running time.
  *
@@ -58,11 +58,11 @@
  *   MDCNFG    0xA0000000    DRAM config
  *   MDCAS0    0xA0000004    Access waveform
  *   MDCAS1    0xA0000008    Access waveform
- *   MDCAS2    0xA000000C    Access waveform 
+ *   MDCAS2    0xA000000C    Access waveform
  *
  * Care must be taken to change the DRAM parameters the correct way,
  * because otherwise the DRAM becomes unusable and the kernel will
- * crash. 
+ * crash.
  *
  * The simple solution to avoid a kernel crash is to put the actual
  * clock change in ROM and jump to that code from the kernel. The main
@@ -75,7 +75,7 @@
  * as long as all re-configuration steps yield a valid DRAM
  * configuration. The advantages are clear: it will run on all SA-1100
  * platforms, and the code is very simple.
- * 
+ *
  * If you really want to understand what is going on in
  * sa1100_update_dram_timings(), you'll have to read sections 8.2,
  * 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor
@@ -97,7 +97,7 @@
 typedef struct {
 	int speed;
 	u32 mdcnfg;
-	u32 mdcas0; 
+	u32 mdcas0;
 	u32 mdcas1;
 	u32 mdcas2;
 } sa1100_dram_regs_t;
@@ -147,7 +147,7 @@ static void sa1100_update_dram_timings(int current_speed, int new_speed)
 	/* No risk, no fun: run with interrupts on! */
 	if (new_speed > current_speed) {
 		/* We're going FASTER, so first relax the memory
-		 * timings before changing the core frequency 
+		 * timings before changing the core frequency
 		 */
 		
 		/* Half the memory access clock */
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 3e4fb214eada..63b32b68b296 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -81,14 +81,14 @@ static struct sdram_params sdram_tbl[] __initdata = {
 		.twr		= 9,
 		.refresh	= 64000,
 		.cas_latency	= 3,
-	}, {    /* Samsung K4S281632B-1H */
-	        .name           = "K4S281632B-1H",
-		.rows           = 12,
-		.tck            = 10,
-		.trp            = 20,
-		.twr            = 10,
-		.refresh        = 64000,
-		.cas_latency    = 3,
+	}, {	/* Samsung K4S281632B-1H */
+		.name           = "K4S281632B-1H",
+		.rows		= 12,
+		.tck		= 10,
+		.trp		= 20,
+		.twr		= 10,
+		.refresh	= 64000,
+		.cas_latency	= 3,
 	}, {	/* Samsung KM416S4030CT */
 		.name		= "KM416S4030CT",
 		.rows		= 13,
@@ -220,7 +220,7 @@ sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram)
 }
 
 /*
- * Ok, set the CPU frequency.  
+ * Ok, set the CPU frequency.
  */
 static int sa1110_target(struct cpufreq_policy *policy,
 			 unsigned int target_freq,
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index f990a3e85846..95f9c5a6d6d5 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -19,7 +19,7 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
 
 
 #undef DEBUG
@@ -113,10 +113,10 @@ int sa1100_request_dma (dma_device_t device, const char *device_id,
 		}
 	}
 	if (!err) {
-	       if (dma)
-		       dma->device = device;
-	       else
-		       err = -ENOSR;
+		if (dma)
+			dma->device = device;
+		else
+			err = -ENOSR;
 	}
 	spin_unlock(&dma_list_lock);
 	if (err)
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
index 3ca0ecf095e6..9cc47fddb335 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -32,14 +32,14 @@ typedef int __bitwise pm_request_t;
 #define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
 
 /* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS     (SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS    SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS    SA1100_CS4_PHYS
+#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
 
 /* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT     0xf0000000
-#define H3600_BANK_2_VIRT    0xf1000000
-#define H3600_BANK_4_VIRT    0xf3800000
+#define H3600_EGPIO_VIRT	0xf0000000
+#define H3600_BANK_2_VIRT	0xf1000000
+#define H3600_BANK_4_VIRT	0xf3800000
 
 /*
    Machine-independent GPIO definitions
diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h
index 0c070a6149bc..d8b43f3dcd2d 100644
--- a/arch/arm/mach-sa1100/include/mach/io.h
+++ b/arch/arm/mach-sa1100/include/mach/io.h
@@ -16,11 +16,7 @@
  * We don't actually have real ISA nor PCI buses, but there is so many 
  * drivers out there that might just work if we fake them...
  */
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index 1c127b68581d..e9f8eed900f5 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -23,23 +23,12 @@ void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
 	sa1111_adjust_zones(node, size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_1M)
 
 #endif
 #endif
 
 /*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- *
- * On the SA1100, bus addresses are equivalent to physical addresses.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-/*
  * Because of the wide memory address space between physical RAM banks on the
  * SA1100, it's much convenient to use Linux's SparseMEM support to implement
  * our memory map representation.  Assuming all memory nodes have equal access
diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
index eaa09e86ad16..b3d684098fbf 100644
--- a/arch/arm/mach-sa1100/include/mach/mtd-xip.h
+++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
@@ -15,6 +15,8 @@
 #ifndef __ARCH_SA1100_MTD_XIP_H__
 #define __ARCH_SA1100_MTD_XIP_H__
 
+#include <mach/hardware.h>
+
 #define xip_irqpending()	(ICIP & ICMR)
 
 /* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index e45d3a1890bc..e1458bc1868e 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -122,12 +122,12 @@ static void __init pleb_map_io(void)
 	sa1100_map_io();
 
 	sa1100_register_uart(0, 3);
-        sa1100_register_uart(1, 1);
+	sa1100_register_uart(1, 1);
 
-        GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
-        GPDR |= GPIO_UART_TXD;
-        GPDR &= ~GPIO_UART_RXD;
-        PPAR |= PPAR_UPR;
+	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
+	GPDR |= GPIO_UART_TXD;
+	GPDR &= ~GPIO_UART_RXD;
+	PPAR |= PPAR_UPR;
 
 	/*
 	 * Fix expansion memory timing for network card
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 9ccdd09cf69f..ddd917d1083d 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -33,7 +33,7 @@ static struct mtd_partition shannon_partitions[] = {
 		.offset		= MTDPART_OFS_APPEND,
 		.size		= 0xe0000
 	},
-	{ 
+	{
 		.name		= "initrd",
 		.offset		= MTDPART_OFS_APPEND,	
 		.size		= MTDPART_SIZ_FULL
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index 171441f96710..80f31bad707c 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -100,36 +100,36 @@ ENTRY(sa1100_cpu_suspend)
 	ldr	r1, =MSC1
 	ldr	r2, =MSC2
 
-        ldr     r3, [r0]
-        bic     r3, r3, #FMsk(MSC_RT)
-        bic     r3, r3, #FMsk(MSC_RT)<<16
+	ldr	r3, [r0]
+	bic	r3, r3, #FMsk(MSC_RT)
+	bic	r3, r3, #FMsk(MSC_RT)<<16
 
-        ldr     r4, [r1]
-        bic     r4, r4, #FMsk(MSC_RT)
-        bic     r4, r4, #FMsk(MSC_RT)<<16
+	ldr	r4, [r1]
+	bic	r4, r4, #FMsk(MSC_RT)
+	bic	r4, r4, #FMsk(MSC_RT)<<16
 
-        ldr     r5, [r2]
-        bic     r5, r5, #FMsk(MSC_RT)
-        bic     r5, r5, #FMsk(MSC_RT)<<16
+	ldr	r5, [r2]
+	bic	r5, r5, #FMsk(MSC_RT)
+	bic	r5, r5, #FMsk(MSC_RT)<<16
 
-        ldr     r6, =MDREFR
+	ldr	r6, =MDREFR
 
-        ldr     r7, [r6]
-        bic     r7, r7, #0x0000FF00
-        bic     r7, r7, #0x000000F0
-        orr     r8, r7, #MDREFR_SLFRSH
+	ldr	r7, [r6]
+bic	r7, r7, #0x0000FF00
+bic	r7, r7, #0x000000F0
+orr	r8, r7, #MDREFR_SLFRSH
 
-        ldr     r9, =MDCNFG
-        ldr     r10, [r9]
-        bic     r10, r10, #(MDCNFG_DE0+MDCNFG_DE1)
-        bic     r10, r10, #(MDCNFG_DE2+MDCNFG_DE3)
+	ldr	r9, =MDCNFG
+	ldr	r10, [r9]
+	bic	r10, r10, #(MDCNFG_DE0+MDCNFG_DE1)
+	bic	r10, r10, #(MDCNFG_DE2+MDCNFG_DE3)
 
-        bic     r11, r8, #MDREFR_SLFRSH
-        bic     r11, r11, #MDREFR_E1PIN
+	bic	r11, r8, #MDREFR_SLFRSH
+	bic	r11, r11, #MDREFR_E1PIN
 
-        ldr     r12, =PMCR
+	ldr	r12, =PMCR
 
-        mov     r13, #PMCR_SF
+	mov	r13, #PMCR_SF
 
 	b	sa1110_sdram_controller_fix
 
@@ -188,10 +188,10 @@ ENTRY(sa1100_cpu_resume)
 	mcr	p15, 0, r1, c8, c7, 0   	@ flush I+D TLBs
 	mcr	p15, 0, r1, c7, c7, 0		@ flush I&D cache
 	mcr	p15, 0, r1, c9, c0, 0		@ invalidate RB
-	mcr     p15, 0, r1, c9, c0, 5		@ allow user space to use RB
+	mcr	p15, 0, r1, c9, c0, 5		@ allow user space to use RB
 
-	mcr 	p15, 0, r4, c3, c0, 0		@ domain ID
-	mcr 	p15, 0, r5, c2, c0, 0		@ translation table base addr
+	mcr	p15, 0, r4, c3, c0, 0		@ domain ID
+	mcr	p15, 0, r5, c2, c0, 0		@ translation table base addr
 	mcr	p15, 0, r6, c13, c0, 0		@ PID
 	b	resume_turn_on_mmu		@ cache align execution
 
@@ -209,7 +209,7 @@ sleep_save_sp:
 
 	.text
 resume_after_mmu:
-	mcr     p15, 0, r1, c15, c1, 2		@ enable clock switching
+	mcr	p15, 0, r1, c15, c1, 2		@ enable clock switching
 	ldmfd	sp!, {r4 - r12, pc}		@ return to caller
 
 
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 24c0a4bae850..8c5e727f3b75 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -2,8 +2,8 @@
  * linux/arch/arm/mach-sa1100/time.c
  *
  * Copyright (C) 1998 Deborah Wallach.
- * Twiddles  (C) 1999 	Hugo Fiennes <hugo@empeg.com>
- * 
+ * Twiddles  (C) 1999 Hugo Fiennes <hugo@empeg.com>
+ *
  * 2000/03/29 (C) Nicolas Pitre <nico@cam.org>
  *	Rewritten: big cleanup, much simpler, better HZ accuracy.
  *
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index a9400d984451..a23fd3d0163a 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -16,6 +16,8 @@
 #include <asm/leds.h>
 #include <asm/param.h>
 
+#include <mach/hardware.h>
+
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
index cb0ee2943c1a..01bf76099ce5 100644
--- a/arch/arm/mach-shark/include/mach/hardware.h
+++ b/arch/arm/mach-shark/include/mach/hardware.h
@@ -28,8 +28,6 @@
 #define ROMCARD_SIZE		0x08000000
 #define ROMCARD_START		0x10000000
 
-#define PCIO_BASE		0xe0000000
-
 
 /* defines for the Framebuffer */
 #define FB_START		0x06000000
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
index 92475922c068..c5cee829fc87 100644
--- a/arch/arm/mach-shark/include/mach/io.h
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -11,46 +11,10 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/hardware.h>
+#define PCIO_BASE	0xe0000000
+#define IO_SPACE_LIMIT	0xffffffff
 
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
- * and are translated to the start of IO.
- */
-#define __PORT_PCIO(x)	(!((x) & 0x80000000))
-
-#define __io(a)                 ((void __iomem *)(PCIO_BASE + (a)))
-
-
-static inline unsigned int __ioaddr (unsigned int port)			\
-{										\
-	if (__PORT_PCIO(port))							\
-		return (unsigned int)(PCIO_BASE + (port));			\
-	else									\
-		return (unsigned int)(IO_BASE + (port));			\
-}
-
-#define __mem_pci(addr) (addr)
-
-/*
- * Translated address IO functions
- *
- * IO address has already been translated to a virtual address
- */
-#define outb_t(v,p)								\
-	(*(volatile unsigned char *)(p) = (v))
-
-#define inb_t(p)								\
-	(*(volatile unsigned char *)(p))
-
-#define outl_t(v,p)								\
-	(*(volatile unsigned long *)(p) = (v))
-
-#define inl_t(p)								\
-	(*(volatile unsigned long *)(p))
+#define __io(a)		((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(addr)	(addr)
 
 #endif
diff --git a/arch/arm/mach-shark/include/mach/dma.h b/arch/arm/mach-shark/include/mach/isa-dma.h
index c0a29bd2a74f..864298ff3927 100644
--- a/arch/arm/mach-shark/include/mach/dma.h
+++ b/arch/arm/mach-shark/include/mach/isa-dma.h
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-shark/include/mach/dma.h
+ * arch/arm/mach-shark/include/mach/isa-dma.h
  *
  * by Alexander Schulz
  */
@@ -10,7 +10,6 @@
  * The rest is not DMAable. See dev /  .properties
  * in OpenFirmware.
  */
-#define MAX_DMA_ADDRESS		0xC0400000
 #define MAX_DMA_CHANNELS	8
 #define DMA_ISA_CASCADE         4
 
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
index b7874ad9f9f6..c5ab038925d6 100644
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -33,12 +33,10 @@ static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsig
 	__arch_adjust_zones(node, size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_4M - 1)
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_4M)
 
 #endif
 
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
 /*
  * Cache flushing area
  */
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index 95096afd5271..c781f30c8368 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -3,12 +3,14 @@ menu "Versatile platform type"
 
 config ARCH_VERSATILE_PB
 	bool "Support Versatile/PB platform"
+	select CPU_ARM926T
 	default y
 	help
 	  Include support for the ARM(R) Versatile/PB platform.
 
 config MACH_VERSATILE_AB
 	bool "Support Versatile/AB platform"
+	select CPU_ARM926T
 	help
 	  Include support for the ARM(R) Versatile/AP platform.
 
diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c
index 58937f1fb38c..c50a44ea7ee6 100644
--- a/arch/arm/mach-versatile/clock.c
+++ b/arch/arm/mach-versatile/clock.c
@@ -10,6 +10,7 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/device.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
@@ -17,36 +18,11 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 
+#include <asm/clkdev.h>
 #include <asm/hardware/icst307.h>
 
 #include "clock.h"
 
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
 int clk_enable(struct clk *clk)
 {
 	return 0;
@@ -66,7 +42,9 @@ EXPORT_SYMBOL(clk_get_rate);
 
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	return rate;
+	struct icst307_vco vco;
+	vco = icst307_khz_to_vco(clk->params, rate / 1000);
+	return icst307_khz(clk->params, vco) * 1000;
 }
 EXPORT_SYMBOL(clk_round_rate);
 
@@ -79,57 +57,9 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 
 		vco = icst307_khz_to_vco(clk->params, rate / 1000);
 		clk->rate = icst307_khz(clk->params, vco) * 1000;
-
-		printk("Clock %s: setting VCO reg params: S=%d R=%d V=%d\n",
-			clk->name, vco.s, vco.r, vco.v);
-
 		clk->setvco(clk, vco);
 		ret = 0;
 	}
 	return ret;
 }
 EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * These are fixed clocks.
- */
-static struct clk kmi_clk = {
-	.name	= "KMIREFCLK",
-	.rate	= 24000000,
-};
-
-static struct clk uart_clk = {
-	.name	= "UARTCLK",
-	.rate	= 24000000,
-};
-
-static struct clk mmci_clk = {
-	.name	= "MCLK",
-	.rate	= 24000000,
-};
-
-int clk_register(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-static int __init clk_init(void)
-{
-	clk_register(&kmi_clk);
-	clk_register(&uart_clk);
-	clk_register(&mmci_clk);
-	return 0;
-}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-versatile/clock.h b/arch/arm/mach-versatile/clock.h
index 8b0b61dd17e4..03468fdc3e58 100644
--- a/arch/arm/mach-versatile/clock.h
+++ b/arch/arm/mach-versatile/clock.h
@@ -12,14 +12,9 @@ struct module;
 struct icst307_params;
 
 struct clk {
-	struct list_head	node;
 	unsigned long		rate;
-	struct module		*owner;
-	const char		*name;
 	const struct icst307_params *params;
+	u32			oscoff;
 	void			*data;
 	void			(*setvco)(struct clk *, struct icst307_vco vco);
 };
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 565e0ba0d67e..df25aa138509 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -31,6 +31,7 @@
 #include <linux/cnt32_to_63.h>
 #include <linux/io.h>
 
+#include <asm/clkdev.h>
 #include <asm/system.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -373,22 +374,60 @@ static const struct icst307_params versatile_oscvco_params = {
 
 static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
 {
-	void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
-	void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET;
+	void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
+	void __iomem *sys_lock = sys + VERSATILE_SYS_LOCK_OFFSET;
 	u32 val;
 
-	val = readl(sys_osc) & ~0x7ffff;
+	val = readl(sys + clk->oscoff) & ~0x7ffff;
 	val |= vco.v | (vco.r << 9) | (vco.s << 16);
 
 	writel(0xa05f, sys_lock);
-	writel(val, sys_osc);
+	writel(val, sys + clk->oscoff);
 	writel(0, sys_lock);
 }
 
-static struct clk versatile_clcd_clk = {
-	.name	= "CLCDCLK",
+static struct clk osc4_clk = {
 	.params	= &versatile_oscvco_params,
-	.setvco = versatile_oscvco_set,
+	.oscoff	= VERSATILE_SYS_OSCCLCD_OFFSET,
+	.setvco	= versatile_oscvco_set,
+};
+
+/*
+ * These are fixed clocks.
+ */
+static struct clk ref24_clk = {
+	.rate	= 24000000,
+};
+
+static struct clk_lookup lookups[] __initdata = {
+	{	/* UART0 */
+		.dev_id		= "dev:f1",
+		.clk		= &ref24_clk,
+	}, {	/* UART1 */
+		.dev_id		= "dev:f2",
+		.clk		= &ref24_clk,
+	}, {	/* UART2 */
+		.dev_id		= "dev:f3",
+		.clk		= &ref24_clk,
+	}, {	/* UART3 */
+		.dev_id		= "fpga:09",
+		.clk		= &ref24_clk,
+	}, {	/* KMI0 */
+		.dev_id		= "fpga:06",
+		.clk		= &ref24_clk,
+	}, {	/* KMI1 */
+		.dev_id		= "fpga:07",
+		.clk		= &ref24_clk,
+	}, {	/* MMC0 */
+		.dev_id		= "fpga:05",
+		.clk		= &ref24_clk,
+	}, {	/* MMC1 */
+		.dev_id		= "fpga:0b",
+		.clk		= &ref24_clk,
+	}, {	/* CLCD */
+		.dev_id		= "dev:20",
+		.clk		= &osc4_clk,
+	}
 };
 
 /*
@@ -786,7 +825,8 @@ void __init versatile_init(void)
 {
 	int i;
 
-	clk_register(&versatile_clcd_clk);
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
 	platform_device_register(&versatile_flash_device);
 	platform_device_register(&versatile_i2c_device);
diff --git a/arch/arm/mach-versatile/include/mach/clkdev.h b/arch/arm/mach-versatile/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/dma.h b/arch/arm/mach-versatile/include/mach/dma.h
deleted file mode 100644
index 0aabf12c8834..000000000000
--- a/arch/arm/mach-versatile/include/mach/dma.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/dma.h
- *
- *  Copyright (C) 2003 ARM Limited.
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h
index c0b9dd1d0257..f067c14c7182 100644
--- a/arch/arm/mach-versatile/include/mach/io.h
+++ b/arch/arm/mach-versatile/include/mach/io.h
@@ -22,11 +22,7 @@
 
 #define IO_SPACE_LIMIT 0xffffffff
 
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)	__io(a)
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
index 216a1312e62e..9bfdb30e1f3f 100644
--- a/arch/arm/mach-versatile/include/mach/irqs.h
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -60,39 +60,6 @@
 #define IRQ_VICSOURCE31		(IRQ_VIC_START + INT_VICSOURCE31)
 #define IRQ_VIC_END		(IRQ_VIC_START + 31)
 
-#define IRQMASK_WDOGINT		INTMASK_WDOGINT
-#define IRQMASK_SOFTINT		INTMASK_SOFTINT
-#define IRQMASK_COMMRx 		INTMASK_COMMRx
-#define IRQMASK_COMMTx 		INTMASK_COMMTx
-#define IRQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
-#define IRQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
-#define IRQMASK_GPIOINT0	INTMASK_GPIOINT0
-#define IRQMASK_GPIOINT1	INTMASK_GPIOINT1
-#define IRQMASK_GPIOINT2	INTMASK_GPIOINT2
-#define IRQMASK_GPIOINT3	INTMASK_GPIOINT3
-#define IRQMASK_RTCINT 		INTMASK_RTCINT
-#define IRQMASK_SSPINT 		INTMASK_SSPINT
-#define IRQMASK_UARTINT0	INTMASK_UARTINT0
-#define IRQMASK_UARTINT1	INTMASK_UARTINT1
-#define IRQMASK_UARTINT2	INTMASK_UARTINT2
-#define IRQMASK_SCIINT 		INTMASK_SCIINT
-#define IRQMASK_CLCDINT		INTMASK_CLCDINT
-#define IRQMASK_DMAINT 		INTMASK_DMAINT
-#define IRQMASK_PWRFAILINT	INTMASK_PWRFAILINT
-#define IRQMASK_MBXINT 		INTMASK_MBXINT
-#define IRQMASK_GNDINT 		INTMASK_GNDINT
-#define IRQMASK_VICSOURCE21	INTMASK_VICSOURCE21
-#define IRQMASK_VICSOURCE22	INTMASK_VICSOURCE22
-#define IRQMASK_VICSOURCE23	INTMASK_VICSOURCE23
-#define IRQMASK_VICSOURCE24	INTMASK_VICSOURCE24
-#define IRQMASK_VICSOURCE25	INTMASK_VICSOURCE25
-#define IRQMASK_VICSOURCE26	INTMASK_VICSOURCE26
-#define IRQMASK_VICSOURCE27	INTMASK_VICSOURCE27
-#define IRQMASK_VICSOURCE28	INTMASK_VICSOURCE28
-#define IRQMASK_VICSOURCE29	INTMASK_VICSOURCE29
-#define IRQMASK_VICSOURCE30	INTMASK_VICSOURCE30
-#define IRQMASK_VICSOURCE31	INTMASK_VICSOURCE31
-
 /* 
  *  FIQ interrupts definitions are the same as the INT definitions.
  */
@@ -130,39 +97,6 @@
 #define FIQ_VICSOURCE31		INT_VICSOURCE31
 
 
-#define FIQMASK_WDOGINT		INTMASK_WDOGINT
-#define FIQMASK_SOFTINT		INTMASK_SOFTINT
-#define FIQMASK_COMMRx 		INTMASK_COMMRx
-#define FIQMASK_COMMTx 		INTMASK_COMMTx
-#define FIQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
-#define FIQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
-#define FIQMASK_GPIOINT0	INTMASK_GPIOINT0
-#define FIQMASK_GPIOINT1	INTMASK_GPIOINT1
-#define FIQMASK_GPIOINT2	INTMASK_GPIOINT2
-#define FIQMASK_GPIOINT3	INTMASK_GPIOINT3
-#define FIQMASK_RTCINT 		INTMASK_RTCINT
-#define FIQMASK_SSPINT 		INTMASK_SSPINT
-#define FIQMASK_UARTINT0	INTMASK_UARTINT0
-#define FIQMASK_UARTINT1	INTMASK_UARTINT1
-#define FIQMASK_UARTINT2	INTMASK_UARTINT2
-#define FIQMASK_SCIINT 		INTMASK_SCIINT
-#define FIQMASK_CLCDINT		INTMASK_CLCDINT
-#define FIQMASK_DMAINT 		INTMASK_DMAINT
-#define FIQMASK_PWRFAILINT	INTMASK_PWRFAILINT
-#define FIQMASK_MBXINT 		INTMASK_MBXINT
-#define FIQMASK_GNDINT 		INTMASK_GNDINT
-#define FIQMASK_VICSOURCE21	INTMASK_VICSOURCE21
-#define FIQMASK_VICSOURCE22	INTMASK_VICSOURCE22
-#define FIQMASK_VICSOURCE23	INTMASK_VICSOURCE23
-#define FIQMASK_VICSOURCE24	INTMASK_VICSOURCE24
-#define FIQMASK_VICSOURCE25	INTMASK_VICSOURCE25
-#define FIQMASK_VICSOURCE26	INTMASK_VICSOURCE26
-#define FIQMASK_VICSOURCE27	INTMASK_VICSOURCE27
-#define FIQMASK_VICSOURCE28	INTMASK_VICSOURCE28
-#define FIQMASK_VICSOURCE29	INTMASK_VICSOURCE29
-#define FIQMASK_VICSOURCE30	INTMASK_VICSOURCE30
-#define FIQMASK_VICSOURCE31	INTMASK_VICSOURCE31
-
 /*
  * Secondary interrupt controller
  */
@@ -188,24 +122,4 @@
 #define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
 #define IRQ_SIC_END		63
 
-#define SIC_IRQMASK_MMCI0B	SIC_INTMASK_MMCI0B
-#define SIC_IRQMASK_MMCI1B	SIC_INTMASK_MMCI1B
-#define SIC_IRQMASK_KMI0	SIC_INTMASK_KMI0
-#define SIC_IRQMASK_KMI1	SIC_INTMASK_KMI1
-#define SIC_IRQMASK_SCI3	SIC_INTMASK_SCI3
-#define SIC_IRQMASK_UART3	SIC_INTMASK_UART3
-#define SIC_IRQMASK_CLCD	SIC_INTMASK_CLCD
-#define SIC_IRQMASK_TOUCH	SIC_INTMASK_TOUCH
-#define SIC_IRQMASK_KEYPAD	SIC_INTMASK_KEYPAD
-#define SIC_IRQMASK_DoC		SIC_INTMASK_DoC
-#define SIC_IRQMASK_MMCI0A	SIC_INTMASK_MMCI0A
-#define SIC_IRQMASK_MMCI1A	SIC_INTMASK_MMCI1A
-#define SIC_IRQMASK_AACI	SIC_INTMASK_AACI
-#define SIC_IRQMASK_ETH		SIC_INTMASK_ETH
-#define SIC_IRQMASK_USB		SIC_INTMASK_USB
-#define SIC_IRQMASK_PCI0	SIC_INTMASK_PCI0
-#define SIC_IRQMASK_PCI1	SIC_INTMASK_PCI1
-#define SIC_IRQMASK_PCI2	SIC_INTMASK_PCI2
-#define SIC_IRQMASK_PCI3	SIC_INTMASK_PCI3
-
 #define NR_IRQS			64
diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h
index b6315c0602ac..79aeab86b903 100644
--- a/arch/arm/mach-versatile/include/mach/memory.h
+++ b/arch/arm/mach-versatile/include/mach/memory.h
@@ -25,14 +25,4 @@
  */
 #define PHYS_OFFSET	UL(0x00000000)
 
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
-
 #endif
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
index f91ba930ca8a..83207395191a 100644
--- a/arch/arm/mach-versatile/include/mach/platform.h
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -347,44 +347,6 @@
 #define INT_VICSOURCE30                 30	/* PCI 3 */
 #define INT_VICSOURCE31                 31	/* SIC source */
 
-/* 
- *  Interrupt bit positions
- * 
- */
-#define INTMASK_WDOGINT                 (1 << INT_WDOGINT)
-#define INTMASK_SOFTINT                 (1 << INT_SOFTINT)
-#define INTMASK_COMMRx                  (1 << INT_COMMRx)
-#define INTMASK_COMMTx                  (1 << INT_COMMTx)
-#define INTMASK_TIMERINT0_1             (1 << INT_TIMERINT0_1)
-#define INTMASK_TIMERINT2_3             (1 << INT_TIMERINT2_3)
-#define INTMASK_GPIOINT0                (1 << INT_GPIOINT0)
-#define INTMASK_GPIOINT1                (1 << INT_GPIOINT1)
-#define INTMASK_GPIOINT2                (1 << INT_GPIOINT2)
-#define INTMASK_GPIOINT3                (1 << INT_GPIOINT3)
-#define INTMASK_RTCINT                  (1 << INT_RTCINT)
-#define INTMASK_SSPINT                  (1 << INT_SSPINT)
-#define INTMASK_UARTINT0                (1 << INT_UARTINT0)
-#define INTMASK_UARTINT1                (1 << INT_UARTINT1)
-#define INTMASK_UARTINT2                (1 << INT_UARTINT2)
-#define INTMASK_SCIINT                  (1 << INT_SCIINT)
-#define INTMASK_CLCDINT                 (1 << INT_CLCDINT)
-#define INTMASK_DMAINT                  (1 << INT_DMAINT)
-#define INTMASK_PWRFAILINT              (1 << INT_PWRFAILINT)
-#define INTMASK_MBXINT                  (1 << INT_MBXINT)
-#define INTMASK_GNDINT                  (1 << INT_GNDINT)
-#define INTMASK_VICSOURCE21             (1 << INT_VICSOURCE21)
-#define INTMASK_VICSOURCE22             (1 << INT_VICSOURCE22)
-#define INTMASK_VICSOURCE23             (1 << INT_VICSOURCE23)
-#define INTMASK_VICSOURCE24             (1 << INT_VICSOURCE24)
-#define INTMASK_VICSOURCE25             (1 << INT_VICSOURCE25)
-#define INTMASK_VICSOURCE26             (1 << INT_VICSOURCE26)
-#define INTMASK_VICSOURCE27             (1 << INT_VICSOURCE27)
-#define INTMASK_VICSOURCE28             (1 << INT_VICSOURCE28)
-#define INTMASK_VICSOURCE29             (1 << INT_VICSOURCE29)
-#define INTMASK_VICSOURCE30             (1 << INT_VICSOURCE30)
-#define INTMASK_VICSOURCE31             (1 << INT_VICSOURCE31)
-
-
 #define VERSATILE_SC_VALID_INT               0x003FFFFF
 
 #define MAXIRQNUM                       31
@@ -417,26 +379,6 @@
 #define SIC_INT_PCI3                    30
 
 
-#define SIC_INTMASK_MMCI0B              (1 << SIC_INT_MMCI0B)
-#define SIC_INTMASK_MMCI1B              (1 << SIC_INT_MMCI1B)
-#define SIC_INTMASK_KMI0                (1 << SIC_INT_KMI0)
-#define SIC_INTMASK_KMI1                (1 << SIC_INT_KMI1)
-#define SIC_INTMASK_SCI3                (1 << SIC_INT_SCI3)
-#define SIC_INTMASK_UART3               (1 << SIC_INT_UART3)
-#define SIC_INTMASK_CLCD                (1 << SIC_INT_CLCD)
-#define SIC_INTMASK_TOUCH               (1 << SIC_INT_TOUCH)
-#define SIC_INTMASK_KEYPAD              (1 << SIC_INT_KEYPAD)
-#define SIC_INTMASK_DoC                 (1 << SIC_INT_DoC)
-#define SIC_INTMASK_MMCI0A              (1 << SIC_INT_MMCI0A)
-#define SIC_INTMASK_MMCI1A              (1 << SIC_INT_MMCI1A)
-#define SIC_INTMASK_AACI                (1 << SIC_INT_AACI)
-#define SIC_INTMASK_ETH                 (1 << SIC_INT_ETH)
-#define SIC_INTMASK_USB                 (1 << SIC_INT_USB)
-#define SIC_INTMASK_PCI0                (1 << SIC_INT_PCI0)
-#define SIC_INTMASK_PCI1                (1 << SIC_INT_PCI1)
-#define SIC_INTMASK_PCI2                (1 << SIC_INT_PCI2)
-#define SIC_INTMASK_PCI3                (1 << SIC_INT_PCI3)
-
 /* 
  *  Clean base - dummy
  * 
diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
new file mode 100644
index 000000000000..8e4178fe5ec2
--- /dev/null
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -0,0 +1,19 @@
+if ARCH_W90X900
+
+config CPU_W90P910
+	bool
+	help
+	  Support for W90P910 of Nuvoton W90X900 CPUs.
+
+menu "W90P910 Machines"
+
+config MACH_W90P910EVB
+	bool "Nuvoton W90P910 Evaluation Board"
+	default y
+	select CPU_W90P910
+	help
+	   Say Y here if you are using the Nuvoton W90P910EVB
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
new file mode 100644
index 000000000000..0c0c1d63f1c7
--- /dev/null
+++ b/arch/arm/mach-w90x900/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y				:= irq.o time.o
+
+# W90X900 CPU support files
+
+obj-$(CONFIG_CPU_W90P910)	+= w90p910.o
+
+# machine support
+
+obj-$(CONFIG_MACH_W90P910EVB)	+= mach-w90p910evb.o
diff --git a/arch/arm/mach-w90x900/Makefile.boot b/arch/arm/mach-w90x900/Makefile.boot
new file mode 100644
index 000000000000..a057b546b6e5
--- /dev/null
+++ b/arch/arm/mach-w90x900/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
new file mode 100644
index 000000000000..40ff40845df0
--- /dev/null
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-w90x900/cpu.h
+ *
+ * Based on linux/include/asm-arm/plat-s3c24xx/cpu.h by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Header file for W90X900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define IODESC_ENT(y)                                  \
+{                                                      \
+       .virtual = (unsigned long)W90X900_VA_##y,       \
+       .pfn     = __phys_to_pfn(W90X900_PA_##y),       \
+       .length  = W90X900_SZ_##y,                      \
+       .type    = MT_DEVICE,                           \
+}
+
+/*Cpu identifier register*/
+
+#define W90X900PDID	W90X900_VA_GCR
+#define W90P910_CPUID	0x02900910
+#define W90P920_CPUID	0x02900920
+#define W90P950_CPUID	0x02900950
+#define W90N960_CPUID	0x02900960
+
+struct w90x900_uartcfg;
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void w90x900_init_irq(void);
+extern void w90p910_init_io(struct map_desc *mach_desc, int size);
+extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
+extern void w90p910_init_clocks(int xtal);
+extern void w90p910_map_io(struct map_desc *mach_desc, int size);
+extern struct sys_timer w90x900_timer;
+
+#define W90X900_RES(name)				\
+struct resource w90x900_##name##_resource[] = {		\
+	[0] = {						\
+		.start = name##_PA,			\
+		.end   = name##_PA + 0x0ff,		\
+		.flags = IORESOURCE_MEM,		\
+	},						\
+	[1] = {						\
+		.start = IRQ_##name,			\
+		.end   = IRQ_##name,			\
+		.flags = IORESOURCE_IRQ,		\
+	}						\
+}
+
+#define W90X900_DEVICE(devname, regname, devid, platdevname)		\
+struct platform_device w90x900_##devname = {				\
+	.name		= platdevname,					\
+	.id		= devid,					\
+	.num_resources 	= ARRAY_SIZE(w90x900_##regname##_resource),	\
+	.resource 	= w90x900_##regname##_resource,			\
+}
+
+#define W90X900_UARTCFG(port, flag, uc, ulc, ufc)	\
+{							\
+		.hwport	= port,				\
+		.flags	= flag,				\
+		.ucon	= uc,				\
+		.ulcon	= ulc,				\
+		.ufcon	= ufc,				\
+}
diff --git a/arch/arm/mach-w90x900/include/mach/entry-macro.S b/arch/arm/mach-w90x900/include/mach/entry-macro.S
new file mode 100644
index 000000000000..d39aca5be9ee
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/entry-macro.S
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for W90P910-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		mov	\base, #AIC_BA
+
+		ldr	\irqnr, [ \base, #AIC_IPER]
+		ldr	\irqnr, [ \base, #AIC_ISNR]
+		cmp	\irqnr, #0
+
+	.endm
+
+	/* currently don't need an disable_fiq macro */
+
+	.macro	disable_fiq
+	.endm
diff --git a/arch/arm/mach-w90x900/include/mach/hardware.h b/arch/arm/mach-w90x900/include/mach/hardware.h
new file mode 100644
index 000000000000..fe3c6265a466
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/hardware.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/hardware.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-w90x900/include/mach/io.h b/arch/arm/mach-w90x900/include/mach/io.h
new file mode 100644
index 000000000000..d96ab99df05b
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/io.h
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/io.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/io.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT	0xffffffff
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+
+#define __mem_pci(a)	(a)
+#define __io(a)		__typesafe_io(a)
+
+#endif
diff --git a/arch/arm/mach-w90x900/include/mach/irqs.h b/arch/arm/mach-w90x900/include/mach/irqs.h
new file mode 100644
index 000000000000..1c583f9cbcde
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/irqs.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/irqs.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/irqs.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ */
+
+#define W90X900_IRQ(x)	(x)
+
+/* Main cpu interrupts */
+
+#define IRQ_WDT		W90X900_IRQ(1)
+#define IRQ_UART0	W90X900_IRQ(7)
+#define IRQ_UART1	W90X900_IRQ(8)
+#define IRQ_UART2	W90X900_IRQ(9)
+#define IRQ_UART3	W90X900_IRQ(10)
+#define IRQ_UART4	W90X900_IRQ(11)
+#define IRQ_TIMER0	W90X900_IRQ(12)
+#define IRQ_TIMER1	W90X900_IRQ(13)
+#define IRQ_T_INT_GROUP	W90X900_IRQ(14)
+#define IRQ_ADC		W90X900_IRQ(31)
+#define NR_IRQS		(IRQ_ADC+1)
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-w90x900/include/mach/map.h b/arch/arm/mach-w90x900/include/mach/map.h
new file mode 100644
index 000000000000..79320ebe614b
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/map.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/map.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/map.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#ifndef __ASSEMBLY__
+#define W90X900_ADDR(x)		((void __iomem *)(0xF0000000 + (x)))
+#else
+#define W90X900_ADDR(x)		(0xF0000000 + (x))
+#endif
+
+#define AHB_IO_BASE		0xB0000000
+#define APB_IO_BASE		0xB8000000
+#define CLOCKPW_BASE		(APB_IO_BASE+0x200)
+#define AIC_IO_BASE		(APB_IO_BASE+0x2000)
+#define TIMER_IO_BASE		(APB_IO_BASE+0x1000)
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+
+#define W90X900_VA_IRQ		W90X900_ADDR(0x00000000)
+#define W90X900_PA_IRQ		(0xB8002000)
+#define W90X900_SZ_IRQ		SZ_4K
+
+#define W90X900_VA_GCR		W90X900_ADDR(0x08002000)
+#define W90X900_PA_GCR		(0xB0000000)
+#define W90X900_SZ_GCR		SZ_4K
+
+/* Clock and Power management */
+
+#define W90X900_VA_CLKPWR	(W90X900_VA_GCR+0x200)
+#define W90X900_PA_CLKPWR	(0xB0000200)
+#define W90X900_SZ_CLKPWR	SZ_4K
+
+/* EBI management */
+
+#define W90X900_VA_EBI		W90X900_ADDR(0x00001000)
+#define W90X900_PA_EBI		(0xB0001000)
+#define W90X900_SZ_EBI		SZ_4K
+
+/* UARTs */
+
+#define W90X900_VA_UART		W90X900_ADDR(0x08000000)
+#define W90X900_PA_UART		(0xB8000000)
+#define W90X900_SZ_UART		SZ_4K
+
+/* Timers */
+
+#define W90X900_VA_TIMER	W90X900_ADDR(0x08001000)
+#define W90X900_PA_TIMER	(0xB8001000)
+#define W90X900_SZ_TIMER	SZ_4K
+
+/* GPIO ports */
+
+#define W90X900_VA_GPIO		W90X900_ADDR(0x08003000)
+#define W90X900_PA_GPIO		(0xB8003000)
+#define W90X900_SZ_GPIO		SZ_4K
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-w90x900/include/mach/memory.h b/arch/arm/mach-w90x900/include/mach/memory.h
new file mode 100644
index 000000000000..971b80702c27
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/memory.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/memory.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-w90x900/include/mach/regs-irq.h b/arch/arm/mach-w90x900/include/mach/regs-irq.h
new file mode 100644
index 000000000000..8a3185fbc9cf
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-irq.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/regs-irq.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H
+
+/* Advance Interrupt Controller (AIC) Registers */
+
+#define AIC_BA    		W90X900_VA_IRQ
+
+#define REG_AIC_IRQSC		(AIC_BA+0x80)
+#define REG_AIC_GEN		(AIC_BA+0x84)
+#define REG_AIC_GASR		(AIC_BA+0x88)
+#define REG_AIC_GSCR		(AIC_BA+0x8C)
+#define REG_AIC_IRSR		(AIC_BA+0x100)
+#define REG_AIC_IASR		(AIC_BA+0x104)
+#define REG_AIC_ISR		(AIC_BA+0x108)
+#define REG_AIC_IPER		(AIC_BA+0x10C)
+#define REG_AIC_ISNR		(AIC_BA+0x110)
+#define REG_AIC_IMR		(AIC_BA+0x114)
+#define REG_AIC_OISR		(AIC_BA+0x118)
+#define REG_AIC_MECR		(AIC_BA+0x120)
+#define REG_AIC_MDCR		(AIC_BA+0x124)
+#define REG_AIC_SSCR		(AIC_BA+0x128)
+#define REG_AIC_SCCR		(AIC_BA+0x12C)
+#define REG_AIC_EOSCR		(AIC_BA+0x130)
+#define AIC_IPER		(0x10C)
+#define AIC_ISNR		(0x110)
+
+/*16-18 bits of REG_AIC_GEN define irq(2-4) group*/
+
+#define TIMER2_IRQ		(1 << 16)
+#define TIMER3_IRQ		(1 << 17)
+#define TIMER4_IRQ		(1 << 18)
+#define TIME_GROUP_IRQ		(TIMER2_IRQ|TIMER3_IRQ|TIMER4_IRQ)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-serial.h b/arch/arm/mach-w90x900/include/mach/regs-serial.h
new file mode 100644
index 000000000000..f08fa0d75e11
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-serial.h
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-serial.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/regs-serial.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define UART0_BA	W90X900_VA_UART
+#define UART1_BA	(W90X900_VA_UART+0x100)
+#define UART2_BA	(W90X900_VA_UART+0x200)
+#define UART3_BA	(W90X900_VA_UART+0x300)
+#define UART4_BA	(W90X900_VA_UART+0x400)
+
+#define UART0_PA	W90X900_PA_UART
+#define UART1_PA	(W90X900_PA_UART+0x100)
+#define UART2_PA	(W90X900_PA_UART+0x200)
+#define UART3_PA	(W90X900_PA_UART+0x300)
+#define UART4_PA	(W90X900_PA_UART+0x400)
+
+#ifndef __ASSEMBLY__
+
+struct w90x900_uart_clksrc {
+	const char	*name;
+	unsigned int	divisor;
+	unsigned int	min_baud;
+	unsigned int	max_baud;
+};
+
+struct w90x900_uartcfg {
+	unsigned char	hwport;
+	unsigned char	unused;
+	unsigned short	flags;
+	unsigned long	uart_flags;
+
+	unsigned long	ucon;
+	unsigned long	ulcon;
+	unsigned long	ufcon;
+
+	struct w90x900_uart_clksrc *clocks;
+	unsigned int	clocks_size;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
diff --git a/arch/arm/mach-w90x900/include/mach/regs-timer.h b/arch/arm/mach-w90x900/include/mach/regs-timer.h
new file mode 100644
index 000000000000..8f390620c0e4
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-timer.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-timer.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/regs-timer.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H
+
+/* Timer Registers */
+
+#define TMR_BA			W90X900_VA_TIMER
+#define REG_TCSR0		(TMR_BA+0x00)
+#define REG_TCSR1		(TMR_BA+0x04)
+#define REG_TICR0		(TMR_BA+0x08)
+#define REG_TICR1		(TMR_BA+0x0C)
+#define REG_TDR0		(TMR_BA+0x10)
+#define REG_TDR1		(TMR_BA+0x14)
+#define REG_TISR		(TMR_BA+0x18)
+#define REG_WTCR		(TMR_BA+0x1C)
+#define REG_TCSR2		(TMR_BA+0x20)
+#define REG_TCSR3		(TMR_BA+0x24)
+#define REG_TICR2		(TMR_BA+0x28)
+#define REG_TICR3		(TMR_BA+0x2C)
+#define REG_TDR2		(TMR_BA+0x30)
+#define REG_TDR3		(TMR_BA+0x34)
+#define REG_TCSR4		(TMR_BA+0x40)
+#define REG_TICR4		(TMR_BA+0x48)
+#define REG_TDR4		(TMR_BA+0x50)
+
+#endif /*  __ASM_ARCH_REGS_TIMER_H */
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
new file mode 100644
index 000000000000..93753f922618
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/system.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/system.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <asm/proc-fns.h>
+
+static void arch_idle(void)
+{
+}
+
+static void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
diff --git a/arch/arm/mach-w90x900/include/mach/timex.h b/arch/arm/mach-w90x900/include/mach/timex.h
new file mode 100644
index 000000000000..164dce0b64db
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/timex.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE Now, I don't use it. */
+
+#define CLOCK_TICK_RATE 15000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h
new file mode 100644
index 000000000000..050d9fe5ae1b
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/uncompress.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/uncompress.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+/* Defines for UART registers */
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+
+#define arch_decomp_wdog()
+
+static void putc(int ch)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static void arch_decomp_setup(void)
+{
+}
+
+#endif/* __ASM_W90X900_UNCOMPRESS_H */
diff --git a/arch/arm/mach-w90x900/include/mach/vmalloc.h b/arch/arm/mach-w90x900/include/mach/vmalloc.h
new file mode 100644
index 000000000000..2f9dfb928533
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/vmalloc.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
new file mode 100644
index 000000000000..0b4fc194729c
--- /dev/null
+++ b/arch/arm/mach-w90x900/irq.c
@@ -0,0 +1,76 @@
+/*
+ * linux/arch/arm/mach-w90x900/irq.c
+ *
+ * based on linux/arch/arm/plat-s3c24xx/irq.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+static void w90x900_irq_mask(unsigned int irq)
+{
+	__raw_writel(1 << irq, REG_AIC_MDCR);
+}
+
+/*
+ * By the w90p910 spec,any irq,only write 1
+ * to REG_AIC_EOSCR for ACK
+ */
+
+static void w90x900_irq_ack(unsigned int irq)
+{
+	__raw_writel(0x01, REG_AIC_EOSCR);
+}
+
+static void w90x900_irq_unmask(unsigned int irq)
+{
+	unsigned long mask;
+
+	if (irq == IRQ_T_INT_GROUP) {
+		mask = __raw_readl(REG_AIC_GEN);
+		__raw_writel(TIME_GROUP_IRQ | mask, REG_AIC_GEN);
+		__raw_writel(1 << IRQ_T_INT_GROUP, REG_AIC_MECR);
+	}
+	__raw_writel(1 << irq, REG_AIC_MECR);
+}
+
+static struct irq_chip w90x900_irq_chip = {
+	.ack	   = w90x900_irq_ack,
+	.mask	   = w90x900_irq_mask,
+	.unmask	   = w90x900_irq_unmask,
+};
+
+void __init w90x900_init_irq(void)
+{
+	int irqno;
+
+	__raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
+
+	for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
+		set_irq_chip(irqno, &w90x900_irq_chip);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+}
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
new file mode 100644
index 000000000000..9307a2475438
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -0,0 +1,72 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-w90p910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-serial.h>
+
+#include "cpu.h"
+
+static struct map_desc w90p910_iodesc[] __initdata = {
+};
+
+static struct w90x900_uartcfg w90p910_uartcfgs[] = {
+	W90X900_UARTCFG(0, 0, 0, 0, 0),
+	W90X900_UARTCFG(1, 0, 0, 0, 0),
+	W90X900_UARTCFG(2, 0, 0, 0, 0),
+	W90X900_UARTCFG(3, 0, 0, 0, 0),
+	W90X900_UARTCFG(4, 0, 0, 0, 0),
+};
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *w90p910evb_dev[] __initdata = {
+};
+
+static void __init w90p910evb_map_io(void)
+{
+	w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
+	w90p910_init_clocks(0);
+	w90p910_init_uarts(w90p910_uartcfgs, ARRAY_SIZE(w90p910_uartcfgs));
+}
+
+static void __init w90p910evb_init(void)
+{
+	platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
+}
+
+MACHINE_START(W90P910EVB, "W90P910EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= w90p910evb_map_io,
+	.init_irq	= w90x900_init_irq,
+	.init_machine	= w90p910evb_init,
+	.timer		= &w90x900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
new file mode 100644
index 000000000000..3a69e381f316
--- /dev/null
+++ b/arch/arm/mach-w90x900/time.c
@@ -0,0 +1,80 @@
+/*
+ * linux/arch/arm/mach-w90x900/time.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include <mach/system.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+static unsigned long w90x900_gettimeoffset(void)
+{
+	return 0;
+}
+
+/*IRQ handler for the timer*/
+
+static irqreturn_t
+w90x900_timer_interrupt(int irq, void *dev_id)
+{
+	timer_tick();
+	__raw_writel(0x01, REG_TISR); /* clear TIF0 */
+	return IRQ_HANDLED;
+}
+
+static struct irqaction w90x900_timer_irq = {
+	.name		= "w90x900 Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= w90x900_timer_interrupt,
+};
+
+/*Set up timer reg.*/
+
+static void w90x900_timer_setup(void)
+{
+	__raw_writel(0, REG_TCSR0);
+	__raw_writel(0, REG_TCSR1);
+	__raw_writel(0, REG_TCSR2);
+	__raw_writel(0, REG_TCSR3);
+	__raw_writel(0, REG_TCSR4);
+	__raw_writel(0x1F, REG_TISR);
+	__raw_writel(15000000/(100 * 100), REG_TICR0);
+	__raw_writel(0x68000063, REG_TCSR0);
+}
+
+static void __init w90x900_timer_init(void)
+{
+	w90x900_timer_setup();
+	setup_irq(IRQ_TIMER0, &w90x900_timer_irq);
+}
+
+struct sys_timer w90x900_timer = {
+	.init		= w90x900_timer_init,
+	.offset		= w90x900_gettimeoffset,
+	.resume		= w90x900_timer_setup
+};
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
new file mode 100644
index 000000000000..aa783bc94310
--- /dev/null
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/arm/mach-w90x900/w90p910.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * W90P910 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+
+#include "cpu.h"
+
+/*W90P910 has five uarts*/
+
+#define MAX_UART_COUNT 5
+static int uart_count;
+static struct platform_device *uart_devs[MAX_UART_COUNT-1];
+
+/* Initial IO mappings */
+
+static struct map_desc w90p910_iodesc[] __initdata = {
+	IODESC_ENT(IRQ),
+	IODESC_ENT(GCR),
+	IODESC_ENT(UART),
+	IODESC_ENT(TIMER),
+	IODESC_ENT(EBI),
+	/*IODESC_ENT(LCD),*/
+};
+
+/*Init the dev resource*/
+
+static W90X900_RES(UART0);
+static W90X900_RES(UART1);
+static W90X900_RES(UART2);
+static W90X900_RES(UART3);
+static W90X900_RES(UART4);
+static W90X900_DEVICE(uart0, UART0, 0, "w90x900-uart");
+static W90X900_DEVICE(uart1, UART1, 1, "w90x900-uart");
+static W90X900_DEVICE(uart2, UART2, 2, "w90x900-uart");
+static W90X900_DEVICE(uart3, UART3, 3, "w90x900-uart");
+static W90X900_DEVICE(uart4, UART4, 4, "w90x900-uart");
+
+static struct platform_device *uart_devices[] __initdata = {
+	&w90x900_uart0,
+	&w90x900_uart1,
+	&w90x900_uart2,
+	&w90x900_uart3,
+	&w90x900_uart4
+};
+
+/*Init W90P910 uart device*/
+
+void __init w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no)
+{
+	struct platform_device *platdev;
+	int uart, uartdev;
+
+	/*By min() to judge count of uart be used indeed*/
+
+	uartdev = ARRAY_SIZE(uart_devices);
+	no = min(uartdev, no);
+
+	for (uart = 0; uart < no; uart++, cfg++) {
+		if (cfg->hwport != uart)
+			printk(KERN_ERR "w90x900_uartcfg[%d] error\n", uart);
+		platdev = uart_devices[cfg->hwport];
+		uart_devs[uart] = platdev;
+		platdev->dev.platform_data = cfg;
+	}
+	uart_count = uart;
+}
+
+/*Init W90P910 evb io*/
+
+void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
+{
+	unsigned long idcode = 0x0;
+
+	iotable_init(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
+
+	idcode = __raw_readl(W90X900PDID);
+	if (idcode != W90P910_CPUID)
+		printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
+}
+
+/*Init W90P910 clock*/
+
+void __init w90p910_init_clocks(int xtal)
+{
+}
+
+static int __init w90p910_init_cpu(void)
+{
+	return 0;
+}
+
+static int __init w90x900_arch_init(void)
+{
+	int ret;
+
+	ret = w90p910_init_cpu();
+	if (ret != 0)
+		return ret;
+
+	return platform_add_devices(uart_devs, uart_count);
+
+}
+arch_initcall(w90x900_arch_init);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index ab5f7a21350b..d490f3773c01 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -10,8 +10,7 @@ config CPU_32
 
 # ARM610
 config CPU_ARM610
-	bool "Support ARM610 processor"
-	depends on ARCH_RPC
+	bool "Support ARM610 processor" if ARCH_RPC
 	select CPU_32v3
 	select CPU_CACHE_V3
 	select CPU_CACHE_VIVT
@@ -43,8 +42,7 @@ config CPU_ARM7TDMI
 
 # ARM710
 config CPU_ARM710
-	bool "Support ARM710 processor" if !ARCH_CLPS7500 && ARCH_RPC
-	default y if ARCH_CLPS7500
+	bool "Support ARM710 processor" if ARCH_RPC
 	select CPU_32v3
 	select CPU_CACHE_V3
 	select CPU_CACHE_VIVT
@@ -63,8 +61,7 @@ config CPU_ARM710
 
 # ARM720T
 config CPU_ARM720T
-	bool "Support ARM720T processor" if !ARCH_CLPS711X && !ARCH_L7200 && !ARCH_CDB89712 && ARCH_INTEGRATOR
-	default y if ARCH_CLPS711X || ARCH_L7200 || ARCH_CDB89712 || ARCH_H720X
+	bool "Support ARM720T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
 	select CPU_PABRT_NOIFAR
@@ -114,9 +111,7 @@ config CPU_ARM9TDMI
 
 # ARM920T
 config CPU_ARM920T
-	bool "Support ARM920T processor"
-	depends on ARCH_EP93XX || ARCH_INTEGRATOR || CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200
-	default y if CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_AT91RM9200
+	bool "Support ARM920T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_PABRT_NOIFAR
@@ -138,8 +133,6 @@ config CPU_ARM920T
 # ARM922T
 config CPU_ARM922T
 	bool "Support ARM922T processor" if ARCH_INTEGRATOR
-	depends on ARCH_LH7A40X || ARCH_INTEGRATOR || ARCH_KS8695
-	default y if ARCH_LH7A40X || ARCH_KS8695
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_PABRT_NOIFAR
@@ -159,8 +152,6 @@ config CPU_ARM922T
 # ARM925T
 config CPU_ARM925T
  	bool "Support ARM925T processor" if ARCH_OMAP1
- 	depends on ARCH_OMAP15XX
- 	default y if ARCH_OMAP15XX
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_PABRT_NOIFAR
@@ -179,22 +170,7 @@ config CPU_ARM925T
 
 # ARM926T
 config CPU_ARM926T
-	bool "Support ARM926T processor"
-	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || \
-		MACH_VERSATILE_AB || ARCH_OMAP730 || \
-		ARCH_OMAP16XX || MACH_REALVIEW_EB || \
-		ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
-		ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
-		ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
-		ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
-		ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2
-	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \
-		ARCH_OMAP730 || ARCH_OMAP16XX || \
-		ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
-		ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
-		ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
-		ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
-		ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2
+	bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
 	select CPU_PABRT_NOIFAR
@@ -247,8 +223,7 @@ config CPU_ARM946E
 
 # ARM1020 - needs validating
 config CPU_ARM1020
-	bool "Support ARM1020T (rev 0) processor"
-	depends on ARCH_INTEGRATOR
+	bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
 	select CPU_PABRT_NOIFAR
@@ -266,8 +241,7 @@ config CPU_ARM1020
 
 # ARM1020E - needs validating
 config CPU_ARM1020E
-	bool "Support ARM1020E processor"
-	depends on ARCH_INTEGRATOR
+	bool "Support ARM1020E processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
 	select CPU_PABRT_NOIFAR
@@ -280,8 +254,7 @@ config CPU_ARM1020E
 
 # ARM1022E
 config CPU_ARM1022
-	bool "Support ARM1022E processor"
-	depends on ARCH_INTEGRATOR
+	bool "Support ARM1022E processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
 	select CPU_PABRT_NOIFAR
@@ -299,8 +272,7 @@ config CPU_ARM1022
 
 # ARM1026EJ-S
 config CPU_ARM1026
-	bool "Support ARM1026EJ-S processor"
-	depends on ARCH_INTEGRATOR
+	bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
 	select CPU_PABRT_NOIFAR
@@ -317,8 +289,7 @@ config CPU_ARM1026
 
 # SA110
 config CPU_SA110
-	bool "Support StrongARM(R) SA-110 processor" if !ARCH_EBSA110 && !FOOTBRIDGE && !ARCH_TBOX && !ARCH_SHARK && !ARCH_NEXUSPCI && ARCH_RPC
-	default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_TBOX || ARCH_SHARK || ARCH_NEXUSPCI
+	bool "Support StrongARM(R) SA-110 processor" if ARCH_RPC
 	select CPU_32v3 if ARCH_RPC
 	select CPU_32v4 if !ARCH_RPC
 	select CPU_ABRT_EV4
@@ -340,8 +311,6 @@ config CPU_SA110
 # SA1100
 config CPU_SA1100
 	bool
-	depends on ARCH_SA1100
-	default y
 	select CPU_32v4
 	select CPU_ABRT_EV4
 	select CPU_PABRT_NOIFAR
@@ -353,8 +322,6 @@ config CPU_SA1100
 # XScale
 config CPU_XSCALE
 	bool
-	depends on ARCH_IOP32X || ARCH_IOP33X || PXA25x || PXA27x || ARCH_IXP4XX || ARCH_IXP2000
-	default y
 	select CPU_32v5
 	select CPU_ABRT_EV5T
 	select CPU_PABRT_NOIFAR
@@ -365,8 +332,6 @@ config CPU_XSCALE
 # XScale Core Version 3
 config CPU_XSC3
 	bool
-	depends on ARCH_IXP23XX || ARCH_IOP13XX || PXA3xx
-	default y
 	select CPU_32v5
 	select CPU_ABRT_EV5T
 	select CPU_PABRT_NOIFAR
@@ -378,8 +343,6 @@ config CPU_XSC3
 # Feroceon
 config CPU_FEROCEON
 	bool
-	depends on ARCH_ORION5X || ARCH_LOKI || ARCH_KIRKWOOD || ARCH_MV78XX0
-	default y
 	select CPU_32v5
 	select CPU_ABRT_EV5T
 	select CPU_PABRT_NOIFAR
@@ -399,10 +362,7 @@ config CPU_FEROCEON_OLD_ID
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor"
-	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
-	default y if ARCH_MX3
-	default y if ARCH_MSM
+	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_PABRT_NOIFAR
@@ -427,8 +387,7 @@ config CPU_32v6K
 
 # ARMv7
 config CPU_V7
-	bool "Support ARM V7 processor"
-	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP3
+	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
@@ -745,7 +704,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
-	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
+	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || REALVIEW_EB_A9MP
 	default y
 	select OUTER_CACHE
 	help
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 133e65d166b3..3a398befed41 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -17,6 +17,7 @@
 #include <linux/string.h>
 #include <linux/proc_fs.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/uaccess.h>
 
 #include <asm/unaligned.h>
@@ -70,6 +71,10 @@ static unsigned long ai_dword;
 static unsigned long ai_multi;
 static int ai_usermode;
 
+#define UM_WARN		(1 << 0)
+#define UM_FIXUP	(1 << 1)
+#define UM_SIGNAL	(1 << 2)
+
 #ifdef CONFIG_PROC_FS
 static const char *usermode_action[] = {
 	"ignored",
@@ -754,7 +759,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
  user:
 	ai_user += 1;
 
-	if (ai_usermode & 1)
+	if (ai_usermode & UM_WARN)
 		printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx "
 		       "Address=0x%08lx FSR 0x%03x\n", current->comm,
 			task_pid_nr(current), instrptr,
@@ -762,10 +767,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		        thumb_mode(regs) ? tinstr : instr,
 		        addr, fsr);
 
-	if (ai_usermode & 2)
+	if (ai_usermode & UM_FIXUP)
 		goto fixup;
 
-	if (ai_usermode & 4)
+	if (ai_usermode & UM_SIGNAL)
 		force_sig(SIGBUS, current);
 	else
 		set_cr(cr_no_alignment);
@@ -796,6 +801,22 @@ static int __init alignment_init(void)
 	res->write_proc = proc_alignment_write;
 #endif
 
+	/*
+	 * ARMv6 and later CPUs can perform unaligned accesses for
+	 * most single load and store instructions up to word size.
+	 * LDM, STM, LDRD and STRD still need to be handled.
+	 *
+	 * Ignoring the alignment fault is not an option on these
+	 * CPUs since we spin re-faulting the instruction without
+	 * making any progress.
+	 */
+	if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) {
+		cr_alignment &= ~CR_A;
+		cr_no_alignment &= ~CR_A;
+		set_cr(cr_alignment);
+		ai_usermode = UM_FIXUP;
+	}
+
 	hook_fault_code(1, do_alignment, SIGILL, "alignment exception");
 	hook_fault_code(3, do_alignment, SIGILL, "alignment exception");
 
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index 3b3639eb7ca5..8a4abebc478a 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 5786adf10040..3668611cb400 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -9,7 +9,6 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index 51a9b0b273b6..c54fa2cc40e6 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -13,7 +13,6 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index d19c2bec2b1f..be93ff02a98d 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -26,6 +26,7 @@
  *	- mm    - mm_struct describing address space
  */
 ENTRY(v7_flush_dcache_all)
+	dmb					@ ensure ordering with previous memory accesses
 	mrc	p15, 1, r0, c0, c0, 1		@ read clidr
 	ands	r3, r0, #0x7000000		@ extract loc from clidr
 	mov	r3, r3, lsr #23			@ left align loc bit field
@@ -64,6 +65,7 @@ skip:
 finished:
 	mov	r10, #0				@ swith back to cache level 0
 	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	dsb
 	isb
 	mov	pc, lr
 ENDPROC(v7_flush_dcache_all)
diff --git a/arch/arm/mm/copypage-feroceon.S b/arch/arm/mm/copypage-feroceon.S
deleted file mode 100644
index 7eb0d320d240..000000000000
--- a/arch/arm/mm/copypage-feroceon.S
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  linux/arch/arm/lib/copypage-feroceon.S
- *
- *  Copyright (C) 2008 Marvell Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This handles copy_user_page and clear_user_page on Feroceon
- * more optimally than the generic implementations.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-
-	.text
-	.align	5
-
-ENTRY(feroceon_copy_user_page)
-	stmfd	sp!, {r4-r9, lr}
-	mov	ip, #PAGE_SZ
-1:	mov	lr, r1
-	ldmia	r1!, {r2 - r9}
-	pld	[lr, #32]
-	pld	[lr, #64]
-	pld	[lr, #96]
-	pld	[lr, #128]
-	pld	[lr, #160]
-	pld	[lr, #192]
-	pld	[lr, #224]
-	stmia	r0, {r2 - r9}
-	ldmia	r1!, {r2 - r9}
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line
-	add	r0, r0, #32
-	stmia	r0, {r2 - r9}
-	ldmia	r1!, {r2 - r9}
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line
-	add	r0, r0, #32
-	stmia	r0, {r2 - r9}
-	ldmia	r1!, {r2 - r9}
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line
-	add	r0, r0, #32
-	stmia	r0, {r2 - r9}
-	ldmia	r1!, {r2 - r9}
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line
-	add	r0, r0, #32
-	stmia	r0, {r2 - r9}
-	ldmia	r1!, {r2 - r9}
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line
-	add	r0, r0, #32
-	stmia	r0, {r2 - r9}
-	ldmia	r1!, {r2 - r9}
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line
-	add	r0, r0, #32
-	stmia	r0, {r2 - r9}
-	ldmia	r1!, {r2 - r9}
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line
-	add	r0, r0, #32
-	stmia	r0, {r2 - r9}
-	subs	ip, ip, #(32 * 8)
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line
-	add	r0, r0, #32
-	bne	1b
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	ldmfd	sp!, {r4-r9, pc}
-
-	.align	5
-
-ENTRY(feroceon_clear_user_page)
-	stmfd	sp!, {r4-r7, lr}
-	mov	r1, #PAGE_SZ/32
-	mov	r2, #0
-	mov	r3, #0
-	mov	r4, #0
-	mov	r5, #0
-	mov	r6, #0
-	mov	r7, #0
-	mov	ip, #0
-	mov	lr, #0
-1:	stmia	r0, {r2-r7, ip, lr}
-	subs	r1, r1, #1
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line
-	add	r0, r0, #32
-	bne	1b
-	mcr	p15, 0, r1, c7, c10, 4		@ drain WB
-	ldmfd	sp!, {r4-r7, pc}
-
-	__INITDATA
-
-	.type	feroceon_user_fns, #object
-ENTRY(feroceon_user_fns)
-	.long	feroceon_clear_user_page
-	.long	feroceon_copy_user_page
-	.size	feroceon_user_fns, . - feroceon_user_fns
diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c
new file mode 100644
index 000000000000..c3ba6a94da0c
--- /dev/null
+++ b/arch/arm/mm/copypage-feroceon.c
@@ -0,0 +1,111 @@
+/*
+ *  linux/arch/arm/mm/copypage-feroceon.S
+ *
+ *  Copyright (C) 2008 Marvell Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This handles copy_user_highpage and clear_user_page on Feroceon
+ * more optimally than the generic implementations.
+ */
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+static void __attribute__((naked))
+feroceon_copy_user_page(void *kto, const void *kfrom)
+{
+	asm("\
+	stmfd	sp!, {r4-r9, lr}		\n\
+	mov	ip, %0				\n\
+1:	mov	lr, r1				\n\
+	ldmia	r1!, {r2 - r9}			\n\
+	pld	[lr, #32]			\n\
+	pld	[lr, #64]			\n\
+	pld	[lr, #96]			\n\
+	pld	[lr, #128]			\n\
+	pld	[lr, #160]			\n\
+	pld	[lr, #192]			\n\
+	pld	[lr, #224]			\n\
+	stmia	r0, {r2 - r9}			\n\
+	ldmia	r1!, {r2 - r9}			\n\
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	r0, r0, #32			\n\
+	stmia	r0, {r2 - r9}			\n\
+	ldmia	r1!, {r2 - r9}			\n\
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	r0, r0, #32			\n\
+	stmia	r0, {r2 - r9}			\n\
+	ldmia	r1!, {r2 - r9}			\n\
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	r0, r0, #32			\n\
+	stmia	r0, {r2 - r9}			\n\
+	ldmia	r1!, {r2 - r9}			\n\
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	r0, r0, #32			\n\
+	stmia	r0, {r2 - r9}			\n\
+	ldmia	r1!, {r2 - r9}			\n\
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	r0, r0, #32			\n\
+	stmia	r0, {r2 - r9}			\n\
+	ldmia	r1!, {r2 - r9}			\n\
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	r0, r0, #32			\n\
+	stmia	r0, {r2 - r9}			\n\
+	ldmia	r1!, {r2 - r9}			\n\
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	r0, r0, #32			\n\
+	stmia	r0, {r2 - r9}			\n\
+	subs	ip, ip, #(32 * 8)		\n\
+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	r0, r0, #32			\n\
+	bne	1b				\n\
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB\n\
+	ldmfd	sp!, {r4-r9, pc}"
+	:
+	: "I" (PAGE_SIZE));
+}
+
+void feroceon_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr)
+{
+	void *kto, *kfrom;
+
+	kto = kmap_atomic(to, KM_USER0);
+	kfrom = kmap_atomic(from, KM_USER1);
+	feroceon_copy_user_page(kto, kfrom);
+	kunmap_atomic(kfrom, KM_USER1);
+	kunmap_atomic(kto, KM_USER0);
+}
+
+void feroceon_clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+	void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+	asm volatile ("\
+	mov	r1, %2				\n\
+	mov	r2, #0				\n\
+	mov	r3, #0				\n\
+	mov	r4, #0				\n\
+	mov	r5, #0				\n\
+	mov	r6, #0				\n\
+	mov	r7, #0				\n\
+	mov	ip, #0				\n\
+	mov	lr, #0				\n\
+1:	stmia	%0, {r2-r7, ip, lr}		\n\
+	subs	r1, r1, #1			\n\
+	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
+	add	%0, %0, #32			\n\
+	bne	1b				\n\
+	mcr	p15, 0, r1, c7, c10, 4		@ drain WB"
+	: "=r" (ptr)
+	: "0" (kaddr), "I" (PAGE_SIZE / 32)
+	: "r1", "r2", "r3", "r4", "r5", "r6", "r7", "ip", "lr");
+	kunmap_atomic(kaddr, KM_USER0);
+}
+
+struct cpu_user_fns feroceon_user_fns __initdata = {
+	.cpu_clear_user_highpage = feroceon_clear_user_highpage,
+	.cpu_copy_user_highpage	= feroceon_copy_user_highpage,
+};
+
diff --git a/arch/arm/mm/copypage-v3.S b/arch/arm/mm/copypage-v3.S
deleted file mode 100644
index 2ee394b11bcb..000000000000
--- a/arch/arm/mm/copypage-v3.S
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  linux/arch/arm/lib/copypage.S
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-
-		.text
-		.align	5
-/*
- * ARMv3 optimised copy_user_page
- *
- * FIXME: do we need to handle cache stuff...
- */
-ENTRY(v3_copy_user_page)
-	stmfd	sp!, {r4, lr}			@	2
-	mov	r2, #PAGE_SZ/64			@	1
-	ldmia	r1!, {r3, r4, ip, lr}		@	4+1
-1:	stmia	r0!, {r3, r4, ip, lr}		@	4
-	ldmia	r1!, {r3, r4, ip, lr}		@	4+1
-	stmia	r0!, {r3, r4, ip, lr}		@	4
-	ldmia	r1!, {r3, r4, ip, lr}		@	4+1
-	stmia	r0!, {r3, r4, ip, lr}		@	4
-	ldmia	r1!, {r3, r4, ip, lr}		@	4
-	subs	r2, r2, #1			@	1
-	stmia	r0!, {r3, r4, ip, lr}		@	4
-	ldmneia	r1!, {r3, r4, ip, lr}		@	4
-	bne	1b				@	1
-	ldmfd	sp!, {r4, pc}			@	3
-
-	.align	5
-/*
- * ARMv3 optimised clear_user_page
- *
- * FIXME: do we need to handle cache stuff...
- */
-ENTRY(v3_clear_user_page)
-	str	lr, [sp, #-4]!
-	mov	r1, #PAGE_SZ/64			@ 1
-	mov	r2, #0				@ 1
-	mov	r3, #0				@ 1
-	mov	ip, #0				@ 1
-	mov	lr, #0				@ 1
-1:	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	subs	r1, r1, #1			@ 1
-	bne	1b				@ 1
-	ldr	pc, [sp], #4
-
-	__INITDATA
-
-	.type	v3_user_fns, #object
-ENTRY(v3_user_fns)
-	.long	v3_clear_user_page
-	.long	v3_copy_user_page
-	.size	v3_user_fns, . - v3_user_fns
diff --git a/arch/arm/mm/copypage-v3.c b/arch/arm/mm/copypage-v3.c
new file mode 100644
index 000000000000..70ed96c8af8e
--- /dev/null
+++ b/arch/arm/mm/copypage-v3.c
@@ -0,0 +1,81 @@
+/*
+ *  linux/arch/arm/mm/copypage-v3.c
+ *
+ *  Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+/*
+ * ARMv3 optimised copy_user_highpage
+ *
+ * FIXME: do we need to handle cache stuff...
+ */
+static void __attribute__((naked))
+v3_copy_user_page(void *kto, const void *kfrom)
+{
+	asm("\n\
+	stmfd	sp!, {r4, lr}			@	2\n\
+	mov	r2, %2				@	1\n\
+	ldmia	%0!, {r3, r4, ip, lr}		@	4+1\n\
+1:	stmia	%1!, {r3, r4, ip, lr}		@	4\n\
+	ldmia	%0!, {r3, r4, ip, lr}		@	4+1\n\
+	stmia	%1!, {r3, r4, ip, lr}		@	4\n\
+	ldmia	%0!, {r3, r4, ip, lr}		@	4+1\n\
+	stmia	%1!, {r3, r4, ip, lr}		@	4\n\
+	ldmia	%0!, {r3, r4, ip, lr}		@	4\n\
+	subs	r2, r2, #1			@	1\n\
+	stmia	%1!, {r3, r4, ip, lr}		@	4\n\
+	ldmneia	%0!, {r3, r4, ip, lr}		@	4\n\
+	bne	1b				@	1\n\
+	ldmfd	sp!, {r4, pc}			@	3"
+	:
+	: "r" (kfrom), "r" (kto), "I" (PAGE_SIZE / 64));
+}
+
+void v3_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr)
+{
+	void *kto, *kfrom;
+
+	kto = kmap_atomic(to, KM_USER0);
+	kfrom = kmap_atomic(from, KM_USER1);
+	v3_copy_user_page(kto, kfrom);
+	kunmap_atomic(kfrom, KM_USER1);
+	kunmap_atomic(kto, KM_USER0);
+}
+
+/*
+ * ARMv3 optimised clear_user_page
+ *
+ * FIXME: do we need to handle cache stuff...
+ */
+void v3_clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+	void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+	asm volatile("\n\
+	mov	r1, %2				@ 1\n\
+	mov	r2, #0				@ 1\n\
+	mov	r3, #0				@ 1\n\
+	mov	ip, #0				@ 1\n\
+	mov	lr, #0				@ 1\n\
+1:	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	subs	r1, r1, #1			@ 1\n\
+	bne	1b				@ 1"
+	: "=r" (ptr)
+	: "0" (kaddr), "I" (PAGE_SIZE / 64)
+	: "r1", "r2", "r3", "ip", "lr");
+	kunmap_atomic(kaddr, KM_USER0);
+}
+
+struct cpu_user_fns v3_user_fns __initdata = {
+	.cpu_clear_user_highpage = v3_clear_user_highpage,
+	.cpu_copy_user_highpage	= v3_copy_user_highpage,
+};
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index 8d33e2549344..bdb5fd983b15 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -15,8 +15,8 @@
  */
 #include <linux/init.h>
 #include <linux/mm.h>
+#include <linux/highmem.h>
 
-#include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
@@ -33,7 +33,7 @@
 static DEFINE_SPINLOCK(minicache_lock);
 
 /*
- * ARMv4 mini-dcache optimised copy_user_page
+ * ARMv4 mini-dcache optimised copy_user_highpage
  *
  * We flush the destination cache lines just before we write the data into the
  * corresponding address.  Since the Dcache is read-allocate, this removes the
@@ -42,7 +42,7 @@ static DEFINE_SPINLOCK(minicache_lock);
  *
  * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
  * instruction.  If your processor does not supply this, you have to write your
- * own copy_user_page that does the right thing.
+ * own copy_user_highpage that does the right thing.
  */
 static void __attribute__((naked))
 mc_copy_user_page(void *from, void *to)
@@ -68,50 +68,53 @@ mc_copy_user_page(void *from, void *to)
 	: "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
 }
 
-void v4_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
+void v4_mc_copy_user_highpage(struct page *from, struct page *to,
+	unsigned long vaddr)
 {
-	struct page *page = virt_to_page(kfrom);
+	void *kto = kmap_atomic(to, KM_USER1);
 
-	if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
-		__flush_dcache_page(page_mapping(page), page);
+	if (test_and_clear_bit(PG_dcache_dirty, &from->flags))
+		__flush_dcache_page(page_mapping(from), from);
 
 	spin_lock(&minicache_lock);
 
-	set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0);
+	set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(page_to_pfn(from), minicache_pgprot), 0);
 	flush_tlb_kernel_page(0xffff8000);
 
 	mc_copy_user_page((void *)0xffff8000, kto);
 
 	spin_unlock(&minicache_lock);
+
+	kunmap_atomic(kto, KM_USER1);
 }
 
 /*
  * ARMv4 optimised clear_user_page
  */
-void __attribute__((naked))
-v4_mc_clear_user_page(void *kaddr, unsigned long vaddr)
+void v4_mc_clear_user_highpage(struct page *page, unsigned long vaddr)
 {
-	asm volatile(
-	"str	lr, [sp, #-4]!\n\
-	mov	r1, %0				@ 1\n\
+	void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+	asm volatile("\
+	mov	r1, %2				@ 1\n\
 	mov	r2, #0				@ 1\n\
 	mov	r3, #0				@ 1\n\
 	mov	ip, #0				@ 1\n\
 	mov	lr, #0				@ 1\n\
-1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	r0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	r0!, {r2, r3, ip, lr}		@ 4\n\
-	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	r0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	r0!, {r2, r3, ip, lr}		@ 4\n\
+1:	mcr	p15, 0, %0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	mcr	p15, 0, %0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
 	subs	r1, r1, #1			@ 1\n\
-	bne	1b				@ 1\n\
-	ldr	pc, [sp], #4"
-	:
-	: "I" (PAGE_SIZE / 64));
+	bne	1b				@ 1"
+	: "=r" (ptr)
+	: "0" (kaddr), "I" (PAGE_SIZE / 64)
+	: "r1", "r2", "r3", "ip", "lr");
+	kunmap_atomic(kaddr, KM_USER0);
 }
 
 struct cpu_user_fns v4_mc_user_fns __initdata = {
-	.cpu_clear_user_page	= v4_mc_clear_user_page, 
-	.cpu_copy_user_page	= v4_mc_copy_user_page,
+	.cpu_clear_user_highpage = v4_mc_clear_user_highpage,
+	.cpu_copy_user_highpage	= v4_mc_copy_user_highpage,
 };
diff --git a/arch/arm/mm/copypage-v4wb.S b/arch/arm/mm/copypage-v4wb.S
deleted file mode 100644
index 83117354b1cd..000000000000
--- a/arch/arm/mm/copypage-v4wb.S
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *  linux/arch/arm/lib/copypage.S
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-
-	.text
-	.align	5
-/*
- * ARMv4 optimised copy_user_page
- *
- * We flush the destination cache lines just before we write the data into the
- * corresponding address.  Since the Dcache is read-allocate, this removes the
- * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
- * and merged as appropriate.
- *
- * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
- * instruction.  If your processor does not supply this, you have to write your
- * own copy_user_page that does the right thing.
- */
-ENTRY(v4wb_copy_user_page)
-	stmfd	sp!, {r4, lr}			@ 2
-	mov	r2, #PAGE_SZ/64			@ 1
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4
-1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line
-	stmia	r0!, {r3, r4, ip, lr}		@ 4
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1
-	stmia	r0!, {r3, r4, ip, lr}		@ 4
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4
-	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line
-	stmia	r0!, {r3, r4, ip, lr}		@ 4
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4
-	subs	r2, r2, #1			@ 1
-	stmia	r0!, {r3, r4, ip, lr}		@ 4
-	ldmneia	r1!, {r3, r4, ip, lr}		@ 4
-	bne	1b				@ 1
-	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB
-	ldmfd	 sp!, {r4, pc}			@ 3
-
-	.align	5
-/*
- * ARMv4 optimised clear_user_page
- *
- * Same story as above.
- */
-ENTRY(v4wb_clear_user_page)
-	str	lr, [sp, #-4]!
-	mov	r1, #PAGE_SZ/64			@ 1
-	mov	r2, #0				@ 1
-	mov	r3, #0				@ 1
-	mov	ip, #0				@ 1
-	mov	lr, #0				@ 1
-1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	subs	r1, r1, #1			@ 1
-	bne	1b				@ 1
-	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB
-	ldr	pc, [sp], #4
-
-	__INITDATA
-
-	.type	v4wb_user_fns, #object
-ENTRY(v4wb_user_fns)
-	.long	v4wb_clear_user_page
-	.long	v4wb_copy_user_page
-	.size	v4wb_user_fns, . - v4wb_user_fns
diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c
new file mode 100644
index 000000000000..3ec93dab7656
--- /dev/null
+++ b/arch/arm/mm/copypage-v4wb.c
@@ -0,0 +1,94 @@
+/*
+ *  linux/arch/arm/mm/copypage-v4wb.c
+ *
+ *  Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+/*
+ * ARMv4 optimised copy_user_highpage
+ *
+ * We flush the destination cache lines just before we write the data into the
+ * corresponding address.  Since the Dcache is read-allocate, this removes the
+ * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
+ * and merged as appropriate.
+ *
+ * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
+ * instruction.  If your processor does not supply this, you have to write your
+ * own copy_user_highpage that does the right thing.
+ */
+static void __attribute__((naked))
+v4wb_copy_user_page(void *kto, const void *kfrom)
+{
+	asm("\
+	stmfd	sp!, {r4, lr}			@ 2\n\
+	mov	r2, %0				@ 1\n\
+	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
+1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
+	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
+	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
+	subs	r2, r2, #1			@ 1\n\
+	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmneia	r1!, {r3, r4, ip, lr}		@ 4\n\
+	bne	1b				@ 1\n\
+	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB\n\
+	ldmfd	 sp!, {r4, pc}			@ 3"
+	:
+	: "I" (PAGE_SIZE / 64));
+}
+
+void v4wb_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr)
+{
+	void *kto, *kfrom;
+
+	kto = kmap_atomic(to, KM_USER0);
+	kfrom = kmap_atomic(from, KM_USER1);
+	v4wb_copy_user_page(kto, kfrom);
+	kunmap_atomic(kfrom, KM_USER1);
+	kunmap_atomic(kto, KM_USER0);
+}
+
+/*
+ * ARMv4 optimised clear_user_page
+ *
+ * Same story as above.
+ */
+void v4wb_clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+	void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+	asm volatile("\
+	mov	r1, %2				@ 1\n\
+	mov	r2, #0				@ 1\n\
+	mov	r3, #0				@ 1\n\
+	mov	ip, #0				@ 1\n\
+	mov	lr, #0				@ 1\n\
+1:	mcr	p15, 0, %0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	mcr	p15, 0, %0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	subs	r1, r1, #1			@ 1\n\
+	bne	1b				@ 1\n\
+	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB"
+	: "=r" (ptr)
+	: "0" (kaddr), "I" (PAGE_SIZE / 64)
+	: "r1", "r2", "r3", "ip", "lr");
+	kunmap_atomic(kaddr, KM_USER0);
+}
+
+struct cpu_user_fns v4wb_user_fns __initdata = {
+	.cpu_clear_user_highpage = v4wb_clear_user_highpage,
+	.cpu_copy_user_highpage	= v4wb_copy_user_highpage,
+};
diff --git a/arch/arm/mm/copypage-v4wt.S b/arch/arm/mm/copypage-v4wt.S
deleted file mode 100644
index e1f2af28d549..000000000000
--- a/arch/arm/mm/copypage-v4wt.S
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- *  linux/arch/arm/lib/copypage-v4.S
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ASM optimised string functions
- *
- *  This is for CPUs with a writethrough cache and 'flush ID cache' is
- *  the only supported cache operation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-
-	.text
-	.align	5
-/*
- * ARMv4 optimised copy_user_page
- *
- * Since we have writethrough caches, we don't have to worry about
- * dirty data in the cache.  However, we do have to ensure that
- * subsequent reads are up to date.
- */
-ENTRY(v4wt_copy_user_page)
-	stmfd	sp!, {r4, lr}			@ 2
-	mov	r2, #PAGE_SZ/64			@ 1
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4
-1:	stmia	r0!, {r3, r4, ip, lr}		@ 4
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1
-	stmia	r0!, {r3, r4, ip, lr}		@ 4
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4
-	stmia	r0!, {r3, r4, ip, lr}		@ 4
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4
-	subs	r2, r2, #1			@ 1
-	stmia	r0!, {r3, r4, ip, lr}		@ 4
-	ldmneia	r1!, {r3, r4, ip, lr}		@ 4
-	bne	1b				@ 1
-	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache
-	ldmfd	sp!, {r4, pc}			@ 3
-
-	.align	5
-/*
- * ARMv4 optimised clear_user_page
- *
- * Same story as above.
- */
-ENTRY(v4wt_clear_user_page)
-	str	lr, [sp, #-4]!
-	mov	r1, #PAGE_SZ/64			@ 1
-	mov	r2, #0				@ 1
-	mov	r3, #0				@ 1
-	mov	ip, #0				@ 1
-	mov	lr, #0				@ 1
-1:	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	subs	r1, r1, #1			@ 1
-	bne	1b				@ 1
-	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache
-	ldr	pc, [sp], #4
-
-	__INITDATA
-
-	.type	v4wt_user_fns, #object
-ENTRY(v4wt_user_fns)
-	.long	v4wt_clear_user_page
-	.long	v4wt_copy_user_page
-	.size	v4wt_user_fns, . - v4wt_user_fns
diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c
new file mode 100644
index 000000000000..0f1188efae45
--- /dev/null
+++ b/arch/arm/mm/copypage-v4wt.c
@@ -0,0 +1,88 @@
+/*
+ *  linux/arch/arm/mm/copypage-v4wt.S
+ *
+ *  Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This is for CPUs with a writethrough cache and 'flush ID cache' is
+ *  the only supported cache operation.
+ */
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+/*
+ * ARMv4 optimised copy_user_highpage
+ *
+ * Since we have writethrough caches, we don't have to worry about
+ * dirty data in the cache.  However, we do have to ensure that
+ * subsequent reads are up to date.
+ */
+static void __attribute__((naked))
+v4wt_copy_user_page(void *kto, const void *kfrom)
+{
+	asm("\
+	stmfd	sp!, {r4, lr}			@ 2\n\
+	mov	r2, %0				@ 1\n\
+	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
+1:	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
+	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
+	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
+	subs	r2, r2, #1			@ 1\n\
+	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
+	ldmneia	r1!, {r3, r4, ip, lr}		@ 4\n\
+	bne	1b				@ 1\n\
+	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache\n\
+	ldmfd	sp!, {r4, pc}			@ 3"
+	:
+	: "I" (PAGE_SIZE / 64));
+}
+
+void v4wt_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr)
+{
+	void *kto, *kfrom;
+
+	kto = kmap_atomic(to, KM_USER0);
+	kfrom = kmap_atomic(from, KM_USER1);
+	v4wt_copy_user_page(kto, kfrom);
+	kunmap_atomic(kfrom, KM_USER1);
+	kunmap_atomic(kto, KM_USER0);
+}
+
+/*
+ * ARMv4 optimised clear_user_page
+ *
+ * Same story as above.
+ */
+void v4wt_clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+	void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+	asm volatile("\
+	mov	r1, %2				@ 1\n\
+	mov	r2, #0				@ 1\n\
+	mov	r3, #0				@ 1\n\
+	mov	ip, #0				@ 1\n\
+	mov	lr, #0				@ 1\n\
+1:	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	subs	r1, r1, #1			@ 1\n\
+	bne	1b				@ 1\n\
+	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache"
+	: "=r" (ptr)
+	: "0" (kaddr), "I" (PAGE_SIZE / 64)
+	: "r1", "r2", "r3", "ip", "lr");
+	kunmap_atomic(kaddr, KM_USER0);
+}
+
+struct cpu_user_fns v4wt_user_fns __initdata = {
+	.cpu_clear_user_highpage = v4wt_clear_user_highpage,
+	.cpu_copy_user_highpage	= v4wt_copy_user_highpage,
+};
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 0e21c0767580..4127a7bddfe5 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -10,8 +10,8 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
+#include <linux/highmem.h>
 
-#include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/shmparam.h>
 #include <asm/tlbflush.h>
@@ -33,41 +33,56 @@ static DEFINE_SPINLOCK(v6_lock);
  * Copy the user page.  No aliasing to deal with so we can just
  * attack the kernel's existing mapping of these pages.
  */
-static void v6_copy_user_page_nonaliasing(void *kto, const void *kfrom, unsigned long vaddr)
+static void v6_copy_user_highpage_nonaliasing(struct page *to,
+	struct page *from, unsigned long vaddr)
 {
+	void *kto, *kfrom;
+
+	kfrom = kmap_atomic(from, KM_USER0);
+	kto = kmap_atomic(to, KM_USER1);
 	copy_page(kto, kfrom);
+	kunmap_atomic(kto, KM_USER1);
+	kunmap_atomic(kfrom, KM_USER0);
 }
 
 /*
  * Clear the user page.  No aliasing to deal with so we can just
  * attack the kernel's existing mapping of this page.
  */
-static void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr)
+static void v6_clear_user_highpage_nonaliasing(struct page *page, unsigned long vaddr)
 {
+	void *kaddr = kmap_atomic(page, KM_USER0);
 	clear_page(kaddr);
+	kunmap_atomic(kaddr, KM_USER0);
 }
 
 /*
- * Copy the page, taking account of the cache colour.
+ * Discard data in the kernel mapping for the new page.
+ * FIXME: needs this MCRR to be supported.
  */
-static void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr)
+static void discard_old_kernel_data(void *kto)
 {
-	unsigned int offset = CACHE_COLOUR(vaddr);
-	unsigned long from, to;
-	struct page *page = virt_to_page(kfrom);
-
-	if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
-		__flush_dcache_page(page_mapping(page), page);
-
-	/*
-	 * Discard data in the kernel mapping for the new page.
-	 * FIXME: needs this MCRR to be supported.
-	 */
 	__asm__("mcrr	p15, 0, %1, %0, c6	@ 0xec401f06"
 	   :
 	   : "r" (kto),
 	     "r" ((unsigned long)kto + PAGE_SIZE - L1_CACHE_BYTES)
 	   : "cc");
+}
+
+/*
+ * Copy the page, taking account of the cache colour.
+ */
+static void v6_copy_user_highpage_aliasing(struct page *to,
+	struct page *from, unsigned long vaddr)
+{
+	unsigned int offset = CACHE_COLOUR(vaddr);
+	unsigned long kfrom, kto;
+
+	if (test_and_clear_bit(PG_dcache_dirty, &from->flags))
+		__flush_dcache_page(page_mapping(from), from);
+
+	/* FIXME: not highmem safe */
+	discard_old_kernel_data(page_address(to));
 
 	/*
 	 * Now copy the page using the same cache colour as the
@@ -75,16 +90,16 @@ static void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned lo
 	 */
 	spin_lock(&v6_lock);
 
-	set_pte_ext(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, PAGE_KERNEL), 0);
-	set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, PAGE_KERNEL), 0);
+	set_pte_ext(TOP_PTE(from_address) + offset, pfn_pte(page_to_pfn(from), PAGE_KERNEL), 0);
+	set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(to), PAGE_KERNEL), 0);
 
-	from = from_address + (offset << PAGE_SHIFT);
-	to   = to_address + (offset << PAGE_SHIFT);
+	kfrom = from_address + (offset << PAGE_SHIFT);
+	kto   = to_address + (offset << PAGE_SHIFT);
 
-	flush_tlb_kernel_page(from);
-	flush_tlb_kernel_page(to);
+	flush_tlb_kernel_page(kfrom);
+	flush_tlb_kernel_page(kto);
 
-	copy_page((void *)to, (void *)from);
+	copy_page((void *)kto, (void *)kfrom);
 
 	spin_unlock(&v6_lock);
 }
@@ -94,20 +109,13 @@ static void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned lo
  * so remap the kernel page into the same cache colour as the user
  * page.
  */
-static void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
+static void v6_clear_user_highpage_aliasing(struct page *page, unsigned long vaddr)
 {
 	unsigned int offset = CACHE_COLOUR(vaddr);
 	unsigned long to = to_address + (offset << PAGE_SHIFT);
 
-	/*
-	 * Discard data in the kernel mapping for the new page
-	 * FIXME: needs this MCRR to be supported.
-	 */
-	__asm__("mcrr	p15, 0, %1, %0, c6	@ 0xec401f06"
-	   :
-	   : "r" (kaddr),
-	     "r" ((unsigned long)kaddr + PAGE_SIZE - L1_CACHE_BYTES)
-	   : "cc");
+	/* FIXME: not highmem safe */
+	discard_old_kernel_data(page_address(page));
 
 	/*
 	 * Now clear the page using the same cache colour as
@@ -115,7 +123,7 @@ static void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
 	 */
 	spin_lock(&v6_lock);
 
-	set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, PAGE_KERNEL), 0);
+	set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(page), PAGE_KERNEL), 0);
 	flush_tlb_kernel_page(to);
 	clear_page((void *)to);
 
@@ -123,15 +131,15 @@ static void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
 }
 
 struct cpu_user_fns v6_user_fns __initdata = {
-	.cpu_clear_user_page	= v6_clear_user_page_nonaliasing,
-	.cpu_copy_user_page	= v6_copy_user_page_nonaliasing,
+	.cpu_clear_user_highpage = v6_clear_user_highpage_nonaliasing,
+	.cpu_copy_user_highpage	= v6_copy_user_highpage_nonaliasing,
 };
 
 static int __init v6_userpage_init(void)
 {
 	if (cache_is_vipt_aliasing()) {
-		cpu_user.cpu_clear_user_page = v6_clear_user_page_aliasing;
-		cpu_user.cpu_copy_user_page = v6_copy_user_page_aliasing;
+		cpu_user.cpu_clear_user_highpage = v6_clear_user_highpage_aliasing;
+		cpu_user.cpu_copy_user_highpage = v6_copy_user_highpage_aliasing;
 	}
 
 	return 0;
diff --git a/arch/arm/mm/copypage-xsc3.S b/arch/arm/mm/copypage-xsc3.S
deleted file mode 100644
index 9a2cb4332b4c..000000000000
--- a/arch/arm/mm/copypage-xsc3.S
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- *  linux/arch/arm/lib/copypage-xsc3.S
- *
- *  Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Adapted for 3rd gen XScale core, no more mini-dcache
- * Author: Matt Gilbert (matthew.m.gilbert@intel.com)
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-
-/*
- * General note:
- *  We don't really want write-allocate cache behaviour for these functions
- *  since that will just eat through 8K of the cache.
- */
-
-	.text
-	.align	5
-/*
- * XSC3 optimised copy_user_page
- *  r0 = destination
- *  r1 = source
- *  r2 = virtual user address of ultimate destination page
- *
- * The source page may have some clean entries in the cache already, but we
- * can safely ignore them - break_cow() will flush them out of the cache
- * if we eventually end up using our copied page.
- *
- */
-ENTRY(xsc3_mc_copy_user_page)
-	stmfd	sp!, {r4, r5, lr}
-	mov	lr, #PAGE_SZ/64-1
-
-	pld	[r1, #0]
-	pld	[r1, #32]
-1:	pld	[r1, #64]
-	pld	[r1, #96]
-
-2:	ldrd	r2, [r1], #8
-	mov	ip, r0
-	ldrd	r4, [r1], #8
-	mcr	p15, 0, ip, c7, c6, 1		@ invalidate
-	strd	r2, [r0], #8
-	ldrd	r2, [r1], #8
-	strd	r4, [r0], #8
-	ldrd	r4, [r1], #8
-	strd	r2, [r0], #8
-	strd	r4, [r0], #8
-	ldrd	r2, [r1], #8
-	mov	ip, r0
-	ldrd	r4, [r1], #8
-	mcr	p15, 0, ip, c7, c6, 1		@ invalidate
-	strd	r2, [r0], #8
-	ldrd	r2, [r1], #8
-	subs	lr, lr, #1
-	strd	r4, [r0], #8
-	ldrd	r4, [r1], #8
-	strd	r2, [r0], #8
-	strd	r4, [r0], #8
-	bgt	1b
-	beq	2b
-
-	ldmfd	sp!, {r4, r5, pc}
-
-	.align	5
-/*
- * XScale optimised clear_user_page
- *  r0 = destination
- *  r1 = virtual user address of ultimate destination page
- */
-ENTRY(xsc3_mc_clear_user_page)
-	mov	r1, #PAGE_SZ/32
-	mov	r2, #0
-	mov	r3, #0
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate line
-	strd	r2, [r0], #8
-	strd	r2, [r0], #8
-	strd	r2, [r0], #8
-	strd	r2, [r0], #8
-	subs	r1, r1, #1
-	bne	1b
-	mov	pc, lr
-
-	__INITDATA
-
-	.type	xsc3_mc_user_fns, #object
-ENTRY(xsc3_mc_user_fns)
-	.long	xsc3_mc_clear_user_page
-	.long	xsc3_mc_copy_user_page
-	.size	xsc3_mc_user_fns, . - xsc3_mc_user_fns
diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c
new file mode 100644
index 000000000000..39a994542cad
--- /dev/null
+++ b/arch/arm/mm/copypage-xsc3.c
@@ -0,0 +1,113 @@
+/*
+ *  linux/arch/arm/mm/copypage-xsc3.S
+ *
+ *  Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Adapted for 3rd gen XScale core, no more mini-dcache
+ * Author: Matt Gilbert (matthew.m.gilbert@intel.com)
+ */
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+/*
+ * General note:
+ *  We don't really want write-allocate cache behaviour for these functions
+ *  since that will just eat through 8K of the cache.
+ */
+
+/*
+ * XSC3 optimised copy_user_highpage
+ *  r0 = destination
+ *  r1 = source
+ *
+ * The source page may have some clean entries in the cache already, but we
+ * can safely ignore them - break_cow() will flush them out of the cache
+ * if we eventually end up using our copied page.
+ *
+ */
+static void __attribute__((naked))
+xsc3_mc_copy_user_page(void *kto, const void *kfrom)
+{
+	asm("\
+	stmfd	sp!, {r4, r5, lr}		\n\
+	mov	lr, %0				\n\
+						\n\
+	pld	[r1, #0]			\n\
+	pld	[r1, #32]			\n\
+1:	pld	[r1, #64]			\n\
+	pld	[r1, #96]			\n\
+						\n\
+2:	ldrd	r2, [r1], #8			\n\
+	mov	ip, r0				\n\
+	ldrd	r4, [r1], #8			\n\
+	mcr	p15, 0, ip, c7, c6, 1		@ invalidate\n\
+	strd	r2, [r0], #8			\n\
+	ldrd	r2, [r1], #8			\n\
+	strd	r4, [r0], #8			\n\
+	ldrd	r4, [r1], #8			\n\
+	strd	r2, [r0], #8			\n\
+	strd	r4, [r0], #8			\n\
+	ldrd	r2, [r1], #8			\n\
+	mov	ip, r0				\n\
+	ldrd	r4, [r1], #8			\n\
+	mcr	p15, 0, ip, c7, c6, 1		@ invalidate\n\
+	strd	r2, [r0], #8			\n\
+	ldrd	r2, [r1], #8			\n\
+	subs	lr, lr, #1			\n\
+	strd	r4, [r0], #8			\n\
+	ldrd	r4, [r1], #8			\n\
+	strd	r2, [r0], #8			\n\
+	strd	r4, [r0], #8			\n\
+	bgt	1b				\n\
+	beq	2b				\n\
+						\n\
+	ldmfd	sp!, {r4, r5, pc}"
+	:
+	: "I" (PAGE_SIZE / 64 - 1));
+}
+
+void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr)
+{
+	void *kto, *kfrom;
+
+	kto = kmap_atomic(to, KM_USER0);
+	kfrom = kmap_atomic(from, KM_USER1);
+	xsc3_mc_copy_user_page(kto, kfrom);
+	kunmap_atomic(kfrom, KM_USER1);
+	kunmap_atomic(kto, KM_USER0);
+}
+
+/*
+ * XScale optimised clear_user_page
+ *  r0 = destination
+ *  r1 = virtual user address of ultimate destination page
+ */
+void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+	void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+	asm volatile ("\
+	mov	r1, %2				\n\
+	mov	r2, #0				\n\
+	mov	r3, #0				\n\
+1:	mcr	p15, 0, %0, c7, c6, 1		@ invalidate line\n\
+	strd	r2, [%0], #8			\n\
+	strd	r2, [%0], #8			\n\
+	strd	r2, [%0], #8			\n\
+	strd	r2, [%0], #8			\n\
+	subs	r1, r1, #1			\n\
+	bne	1b"
+	: "=r" (ptr)
+	: "0" (kaddr), "I" (PAGE_SIZE / 32)
+	: "r1", "r2", "r3");
+	kunmap_atomic(kaddr, KM_USER0);
+}
+
+struct cpu_user_fns xsc3_mc_user_fns __initdata = {
+	.cpu_clear_user_highpage = xsc3_mc_clear_user_highpage,
+	.cpu_copy_user_highpage	= xsc3_mc_copy_user_highpage,
+};
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index bad49331bbf9..d18f2397ee2d 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -15,8 +15,8 @@
  */
 #include <linux/init.h>
 #include <linux/mm.h>
+#include <linux/highmem.h>
 
-#include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
@@ -35,7 +35,7 @@
 static DEFINE_SPINLOCK(minicache_lock);
 
 /*
- * XScale mini-dcache optimised copy_user_page
+ * XScale mini-dcache optimised copy_user_highpage
  *
  * We flush the destination cache lines just before we write the data into the
  * corresponding address.  Since the Dcache is read-allocate, this removes the
@@ -90,48 +90,53 @@ mc_copy_user_page(void *from, void *to)
 	: "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1));
 }
 
-void xscale_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
+void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr)
 {
-	struct page *page = virt_to_page(kfrom);
+	void *kto = kmap_atomic(to, KM_USER1);
 
-	if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
-		__flush_dcache_page(page_mapping(page), page);
+	if (test_and_clear_bit(PG_dcache_dirty, &from->flags))
+		__flush_dcache_page(page_mapping(from), from);
 
 	spin_lock(&minicache_lock);
 
-	set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0);
+	set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(page_to_pfn(from), minicache_pgprot), 0);
 	flush_tlb_kernel_page(COPYPAGE_MINICACHE);
 
 	mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto);
 
 	spin_unlock(&minicache_lock);
+
+	kunmap_atomic(kto, KM_USER1);
 }
 
 /*
  * XScale optimised clear_user_page
  */
-void __attribute__((naked))
-xscale_mc_clear_user_page(void *kaddr, unsigned long vaddr)
+void
+xscale_mc_clear_user_highpage(struct page *page, unsigned long vaddr)
 {
+	void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
 	asm volatile(
-	"mov	r1, %0				\n\
+	"mov	r1, %2				\n\
 	mov	r2, #0				\n\
 	mov	r3, #0				\n\
-1:	mov	ip, r0				\n\
-	strd	r2, [r0], #8			\n\
-	strd	r2, [r0], #8			\n\
-	strd	r2, [r0], #8			\n\
-	strd	r2, [r0], #8			\n\
+1:	mov	ip, %0				\n\
+	strd	r2, [%0], #8			\n\
+	strd	r2, [%0], #8			\n\
+	strd	r2, [%0], #8			\n\
+	strd	r2, [%0], #8			\n\
 	mcr	p15, 0, ip, c7, c10, 1		@ clean D line\n\
 	subs	r1, r1, #1			\n\
 	mcr	p15, 0, ip, c7, c6, 1		@ invalidate D line\n\
-	bne	1b				\n\
-	mov	pc, lr"
-	:
-	: "I" (PAGE_SIZE / 32));
+	bne	1b"
+	: "=r" (ptr)
+	: "0" (kaddr), "I" (PAGE_SIZE / 32)
+	: "r1", "r2", "r3", "ip");
+	kunmap_atomic(kaddr, KM_USER0);
 }
 
 struct cpu_user_fns xscale_mc_user_fns __initdata = {
-	.cpu_clear_user_page	= xscale_mc_clear_user_page, 
-	.cpu_copy_user_page	= xscale_mc_copy_user_page,
+	.cpu_clear_user_highpage = xscale_mc_clear_user_highpage,
+	.cpu_copy_user_highpage	= xscale_mc_copy_user_highpage,
 };
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 2df8d9facf57..0455557a2899 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -11,9 +11,11 @@
 #include <linux/module.h>
 #include <linux/signal.h>
 #include <linux/mm.h>
+#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
+#include <linux/page-flags.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -83,13 +85,14 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 			break;
 		}
 
-#ifndef CONFIG_HIGHMEM
 		/* We must not map this if we have highmem enabled */
+		if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT)))
+			break;
+
 		pte = pte_offset_map(pmd, addr);
 		printk(", *pte=%08lx", pte_val(*pte));
 		printk(", *ppte=%08lx", pte_val(pte[-PTRS_PER_PTE]));
 		pte_unmap(pte);
-#endif
 	} while(0);
 
 	printk("\n");
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 82c4b4217989..34df4d9d03a6 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -17,6 +17,7 @@
 #include <linux/initrd.h>
 
 #include <asm/mach-types.h>
+#include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/sizes.h>
 #include <asm/tlb.h>
@@ -64,10 +65,11 @@ static int __init parse_tag_initrd2(const struct tag *tag)
 __tagtable(ATAG_INITRD2, parse_tag_initrd2);
 
 /*
- * This is used to pass memory configuration data from paging_init
- * to mem_init, and by show_mem() to skip holes in the memory map.
+ * This keeps memory configuration data used by a couple memory
+ * initialization functions, as well as show_mem() for the skipping
+ * of holes in the memory map.  It is populated by arm_add_memory().
  */
-static struct meminfo meminfo = { 0, };
+struct meminfo meminfo;
 
 void show_mem(void)
 {
@@ -128,7 +130,7 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
 {
 	unsigned int start_pfn, i, bootmap_pfn;
 
-	start_pfn   = PAGE_ALIGN(__pa(&_end)) >> PAGE_SHIFT;
+	start_pfn   = PAGE_ALIGN(__pa(_end)) >> PAGE_SHIFT;
 	bootmap_pfn = 0;
 
 	for_each_nodebank(i, mi, node) {
@@ -331,13 +333,12 @@ static void __init bootmem_free_node(int node, struct meminfo *mi)
 	free_area_init_node(node, zone_size, start_pfn, zhole_size);
 }
 
-void __init bootmem_init(struct meminfo *mi)
+void __init bootmem_init(void)
 {
+	struct meminfo *mi = &meminfo;
 	unsigned long memend_pfn = 0;
 	int node, initrd_node;
 
-	memcpy(&meminfo, mi, sizeof(meminfo));
-
 	/*
 	 * Locate which node contains the ramdisk image, if any.
 	 */
@@ -394,20 +395,22 @@ void __init bootmem_init(struct meminfo *mi)
 	max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
 }
 
-static inline void free_area(unsigned long addr, unsigned long end, char *s)
+static inline int free_area(unsigned long pfn, unsigned long end, char *s)
 {
-	unsigned int size = (end - addr) >> 10;
+	unsigned int pages = 0, size = (end - pfn) << (PAGE_SHIFT - 10);
 
-	for (; addr < end; addr += PAGE_SIZE) {
-		struct page *page = virt_to_page(addr);
+	for (; pfn < end; pfn++) {
+		struct page *page = pfn_to_page(pfn);
 		ClearPageReserved(page);
 		init_page_count(page);
-		free_page(addr);
-		totalram_pages++;
+		__free_page(page);
+		pages++;
 	}
 
 	if (size && s)
 		printk(KERN_INFO "Freeing %s memory: %dK\n", s, size);
+
+	return pages;
 }
 
 static inline void
@@ -478,13 +481,9 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi)
  */
 void __init mem_init(void)
 {
-	unsigned int codepages, datapages, initpages;
+	unsigned int codesize, datasize, initsize;
 	int i, node;
 
-	codepages = &_etext - &_text;
-	datapages = &_end - &__data_start;
-	initpages = &__init_end - &__init_begin;
-
 #ifndef CONFIG_DISCONTIGMEM
 	max_mapnr   = virt_to_page(high_memory) - mem_map;
 #endif
@@ -501,7 +500,8 @@ void __init mem_init(void)
 
 #ifdef CONFIG_SA1111
 	/* now that our DMA memory is actually so designated, we can free it */
-	free_area(PAGE_OFFSET, (unsigned long)swapper_pg_dir, NULL);
+	totalram_pages += free_area(PHYS_PFN_OFFSET,
+				    __phys_to_pfn(__pa(swapper_pg_dir)), NULL);
 #endif
 
 	/*
@@ -509,18 +509,21 @@ void __init mem_init(void)
 	 * real number of pages we have in this system
 	 */
 	printk(KERN_INFO "Memory:");
-
 	num_physpages = 0;
 	for (i = 0; i < meminfo.nr_banks; i++) {
 		num_physpages += bank_pfn_size(&meminfo.bank[i]);
 		printk(" %ldMB", bank_phys_size(&meminfo.bank[i]) >> 20);
 	}
-
 	printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
+
+	codesize = _etext - _text;
+	datasize = _end - _data;
+	initsize = __init_end - __init_begin;
+
 	printk(KERN_NOTICE "Memory: %luKB available (%dK code, "
 		"%dK data, %dK init)\n",
 		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
-		codepages >> 10, datapages >> 10, initpages >> 10);
+		codesize >> 10, datasize >> 10, initsize >> 10);
 
 	if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
 		extern int sysctl_overcommit_memory;
@@ -535,11 +538,10 @@ void __init mem_init(void)
 
 void free_initmem(void)
 {
-	if (!machine_is_integrator() && !machine_is_cintegrator()) {
-		free_area((unsigned long)(&__init_begin),
-			  (unsigned long)(&__init_end),
-			  "init");
-	}
+	if (!machine_is_integrator() && !machine_is_cintegrator())
+		totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
+					    __phys_to_pfn(__pa(__init_end)),
+					    "init");
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -549,7 +551,9 @@ static int keep_initrd;
 void free_initrd_mem(unsigned long start, unsigned long end)
 {
 	if (!keep_initrd)
-		free_area(start, end, "initrd");
+		totalram_pages += free_area(__phys_to_pfn(__pa(start)),
+					    __phys_to_pfn(__pa(end)),
+					    "initrd");
 }
 
 static int __init keepinitrd_setup(char *__unused)
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 5d9f53907b4e..95bbe112965e 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -32,7 +32,5 @@ struct meminfo;
 struct pglist_data;
 
 void __init create_mapping(struct map_desc *md);
-void __init bootmem_init(struct meminfo *mi);
+void __init bootmem_init(void);
 void reserve_node_zero(struct pglist_data *pgdat);
-
-extern void _text, _stext, _etext, __data_start, _end, __init_begin, __init_end;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 7f36c825718d..9b36c5cb5e9f 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -17,6 +17,7 @@
 
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
+#include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/sizes.h>
 #include <asm/tlb.h>
@@ -646,61 +647,79 @@ static void __init early_vmalloc(char **arg)
 			"vmalloc area too small, limiting to %luMB\n",
 			vmalloc_reserve >> 20);
 	}
+
+	if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
+		vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
+		printk(KERN_WARNING
+			"vmalloc area is too big, limiting to %luMB\n",
+			vmalloc_reserve >> 20);
+	}
 }
 __early_param("vmalloc=", early_vmalloc);
 
 #define VMALLOC_MIN	(void *)(VMALLOC_END - vmalloc_reserve)
 
-static int __init check_membank_valid(struct membank *mb)
+static void __init sanity_check_meminfo(void)
 {
-	/*
-	 * Check whether this memory region has non-zero size or
-	 * invalid node number.
-	 */
-	if (mb->size == 0 || mb->node >= MAX_NUMNODES)
-		return 0;
-
-	/*
-	 * Check whether this memory region would entirely overlap
-	 * the vmalloc area.
-	 */
-	if (phys_to_virt(mb->start) >= VMALLOC_MIN) {
-		printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
-			"(vmalloc region overlap).\n",
-			mb->start, mb->start + mb->size - 1);
-		return 0;
-	}
-
-	/*
-	 * Check whether this memory region would partially overlap
-	 * the vmalloc area.
-	 */
-	if (phys_to_virt(mb->start + mb->size) < phys_to_virt(mb->start) ||
-	    phys_to_virt(mb->start + mb->size) > VMALLOC_MIN) {
-		unsigned long newsize = VMALLOC_MIN - phys_to_virt(mb->start);
-
-		printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
-			"to -%.8lx (vmalloc region overlap).\n",
-			mb->start, mb->start + mb->size - 1,
-			mb->start + newsize - 1);
-		mb->size = newsize;
-	}
+	int i, j;
 
-	return 1;
-}
+	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
+		struct membank *bank = &meminfo.bank[j];
+		*bank = meminfo.bank[i];
 
-static void __init sanity_check_meminfo(struct meminfo *mi)
-{
-	int i, j;
+#ifdef CONFIG_HIGHMEM
+		/*
+		 * Split those memory banks which are partially overlapping
+		 * the vmalloc area greatly simplifying things later.
+		 */
+		if (__va(bank->start) < VMALLOC_MIN &&
+		    bank->size > VMALLOC_MIN - __va(bank->start)) {
+			if (meminfo.nr_banks >= NR_BANKS) {
+				printk(KERN_CRIT "NR_BANKS too low, "
+						 "ignoring high memory\n");
+			} else {
+				memmove(bank + 1, bank,
+					(meminfo.nr_banks - i) * sizeof(*bank));
+				meminfo.nr_banks++;
+				i++;
+				bank[1].size -= VMALLOC_MIN - __va(bank->start);
+				bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+				j++;
+			}
+			bank->size = VMALLOC_MIN - __va(bank->start);
+		}
+#else
+		/*
+		 * Check whether this memory bank would entirely overlap
+		 * the vmalloc area.
+		 */
+		if (__va(bank->start) >= VMALLOC_MIN) {
+			printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
+			       "(vmalloc region overlap).\n",
+			       bank->start, bank->start + bank->size - 1);
+			continue;
+		}
 
-	for (i = 0, j = 0; i < mi->nr_banks; i++) {
-		if (check_membank_valid(&mi->bank[i]))
-			mi->bank[j++] = mi->bank[i];
+		/*
+		 * Check whether this memory bank would partially overlap
+		 * the vmalloc area.
+		 */
+		if (__va(bank->start + bank->size) > VMALLOC_MIN ||
+		    __va(bank->start + bank->size) < __va(bank->start)) {
+			unsigned long newsize = VMALLOC_MIN - __va(bank->start);
+			printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
+			       "to -%.8lx (vmalloc region overlap).\n",
+			       bank->start, bank->start + bank->size - 1,
+			       bank->start + newsize - 1);
+			bank->size = newsize;
+		}
+#endif
+		j++;
 	}
-	mi->nr_banks = j;
+	meminfo.nr_banks = j;
 }
 
-static inline void prepare_page_table(struct meminfo *mi)
+static inline void prepare_page_table(void)
 {
 	unsigned long addr;
 
@@ -712,7 +731,7 @@ static inline void prepare_page_table(struct meminfo *mi)
 
 #ifdef CONFIG_XIP_KERNEL
 	/* The XIP kernel is mapped in the module area -- skip over it */
-	addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
+	addr = ((unsigned long)_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
 #endif
 	for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
@@ -721,7 +740,7 @@ static inline void prepare_page_table(struct meminfo *mi)
 	 * Clear out all the kernel space mappings, except for the first
 	 * memory bank, up to the end of the vmalloc region.
 	 */
-	for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
+	for (addr = __phys_to_virt(bank_phys_end(&meminfo.bank[0]));
 	     addr < VMALLOC_END; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
 }
@@ -738,10 +757,10 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 	 * Note that this can only be in node 0.
 	 */
 #ifdef CONFIG_XIP_KERNEL
-	reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start,
+	reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
 			BOOTMEM_DEFAULT);
 #else
-	reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext,
+	reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
 			BOOTMEM_DEFAULT);
 #endif
 
@@ -808,7 +827,6 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	 * Allocate the vector page early.
 	 */
 	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
-	BUG_ON(!vectors);
 
 	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
@@ -820,7 +838,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 #ifdef CONFIG_XIP_KERNEL
 	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
 	map.virtual = MODULES_VADDR;
-	map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
+	map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
 	map.type = MT_ROM;
 	create_mapping(&map);
 #endif
@@ -880,23 +898,23 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
  */
-void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+void __init paging_init(struct machine_desc *mdesc)
 {
 	void *zero_page;
 
 	build_mem_type_table();
-	sanity_check_meminfo(mi);
-	prepare_page_table(mi);
-	bootmem_init(mi);
+	sanity_check_meminfo();
+	prepare_page_table();
+	bootmem_init();
 	devicemaps_init(mdesc);
 
 	top_pmd = pmd_off_k(0xffff0000);
 
 	/*
-	 * allocate the zero page.  Note that we count on this going ok.
+	 * allocate the zero page.  Note that this always succeeds and
+	 * returns a zeroed result.
 	 */
 	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
-	memzero(zero_page, PAGE_SIZE);
 	empty_zero_page = virt_to_page(zero_page);
 	flush_dcache_page(empty_zero_page);
 }
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 07b62b238979..ad7bacc693b2 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -10,6 +10,7 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
+#include <asm/sections.h>
 #include <asm/page.h>
 #include <asm/mach/arch.h>
 
@@ -25,10 +26,10 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 	 * Note that this can only be in node 0.
 	 */
 #ifdef CONFIG_XIP_KERNEL
-	reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start,
+	reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
 			BOOTMEM_DEFAULT);
 #else
-	reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext,
+	reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
 			BOOTMEM_DEFAULT);
 #endif
 
@@ -41,27 +42,13 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 			BOOTMEM_DEFAULT);
 }
 
-static void __init sanity_check_meminfo(struct meminfo *mi)
-{
-	int i, j;
-
-	for (i = 0, j = 0; i < mi->nr_banks; i++) {
-		struct membank *mb = &mi->bank[i];
-
-		if (mb->size != 0 && mb->node < MAX_NUMNODES)
-			mi->bank[j++] = mi->bank[i];
-	}
-	mi->nr_banks = j;
-}
-
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
  */
-void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+void __init paging_init(struct machine_desc *mdesc)
 {
-	sanity_check_meminfo(mi);
-	bootmem_init(mi);
+	bootmem_init();
 }
 
 /*
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index e0f19ab91163..2690146161ba 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -31,7 +31,7 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 	if (!new_pgd)
 		goto no_pgd;
 
-	memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
+	memset(new_pgd, 0, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
 
 	/*
 	 * Copy over the kernel and IO PGD entries
diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c
index 2b5ba396e3a6..4ad3bf291ad3 100644
--- a/arch/arm/mm/proc-syms.c
+++ b/arch/arm/mm/proc-syms.c
@@ -33,8 +33,8 @@ EXPORT_SYMBOL(cpu_cache);
 
 #ifdef CONFIG_MMU
 #ifndef MULTI_USER
-EXPORT_SYMBOL(__cpu_clear_user_page);
-EXPORT_SYMBOL(__cpu_copy_user_page);
+EXPORT_SYMBOL(__cpu_clear_user_highpage);
+EXPORT_SYMBOL(__cpu_copy_user_highpage);
 #else
 EXPORT_SYMBOL(cpu_user);
 #endif
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 294943b85973..f0cc599facb7 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -71,6 +71,8 @@ ENTRY(cpu_v6_reset)
  *	IRQs are already disabled.
  */
 ENTRY(cpu_v6_do_idle)
+	mov	r1, #0
+	mcr	p15, 0, r1, c7, c10, 4		@ DWB - WFI may enter a low-power mode
 	mcr	p15, 0, r1, c7, c0, 4		@ wait for interrupt
 	mov	pc, lr
 
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 4d3c0a73e7fb..d1ebec42521d 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -20,9 +20,17 @@
 
 #define TTB_C		(1 << 0)
 #define TTB_S		(1 << 1)
+#define TTB_RGN_NC	(0 << 3)
+#define TTB_RGN_OC_WBWA	(1 << 3)
 #define TTB_RGN_OC_WT	(2 << 3)
 #define TTB_RGN_OC_WB	(3 << 3)
 
+#ifndef CONFIG_SMP
+#define TTB_FLAGS	TTB_C|TTB_RGN_OC_WB		@ mark PTWs cacheable, outer WB
+#else
+#define TTB_FLAGS	TTB_C|TTB_S|TTB_RGN_OC_WBWA	@ mark PTWs cacheable and shared, outer WBWA
+#endif
+
 ENTRY(cpu_v7_proc_init)
 	mov	pc, lr
 ENDPROC(cpu_v7_proc_init)
@@ -55,6 +63,7 @@ ENDPROC(cpu_v7_reset)
  *	IRQs are already disabled.
  */
 ENTRY(cpu_v7_do_idle)
+	dsb					@ WFI may enter a low-power mode
 	wfi
 	mov	pc, lr
 ENDPROC(cpu_v7_do_idle)
@@ -85,7 +94,7 @@ ENTRY(cpu_v7_switch_mm)
 #ifdef CONFIG_MMU
 	mov	r2, #0
 	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
-	orr	r0, r0, #TTB_RGN_OC_WB		@ mark PTWs outer cacheable, WB
+	orr	r0, r0, #TTB_FLAGS
 	mcr	p15, 0, r2, c13, c0, 1		@ set reserved context ID
 	isb
 1:	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
@@ -162,6 +171,11 @@ cpu_v7_name:
  *	- cache type register is implemented
  */
 __v7_setup:
+#ifdef CONFIG_SMP
+	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode
+	orr	r0, r0, #(0x1 << 6)
+	mcr	p15, 0, r0, c1, c0, 1
+#endif
 	adr	r12, __v7_setup_stack		@ the local stack
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
 	bl	v7_flush_dcache_all
@@ -174,8 +188,7 @@ __v7_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r10, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r10, c2, c0, 2		@ TTB control register
-	orr	r4, r4, #TTB_RGN_OC_WB		@ mark PTWs outer cacheable, WB
-	mcr	p15, 0, r4, c2, c0, 0		@ load TTB0
+	orr	r4, r4, #TTB_FLAGS
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b2a7e3fad117..9cc2b16fdf79 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -6,18 +6,27 @@ choice
 	prompt "MXC/iMX Base Type"
 	default ARCH_MX3
 
+config ARCH_MX1
+	bool "MX1-based"
+	select CPU_ARM920T
+	help
+	  This enables support for systems based on the Freescale i.MX1 family
+
 config ARCH_MX2
 	bool "MX2-based"
+	select CPU_ARM926T
 	help
 	  This enables support for systems based on the Freescale i.MX2 family
 
 config ARCH_MX3
 	bool "MX3-based"
+	select CPU_V6
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
 endchoice
 
+source "arch/arm/mach-mx1/Kconfig"
 source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 067556f7c91f..db74a929179d 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,4 +5,5 @@
 # Common support
 obj-y := irq.o clock.o gpio.o time.o devices.o
 
+obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index b296f19fd89a..2905ec758758 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -34,7 +34,6 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <asm/dma.h>
 #include <mach/dma-mx1-mx2.h>
 
 #define DMA_DCR     0x00		/* Control Register */
@@ -114,7 +113,7 @@ struct imx_dma_channel {
 	void (*err_handler) (int, void *, int errcode);
 	void (*prog_handler) (int, void *, struct scatterlist *);
 	void *data;
-	dmamode_t  dma_mode;
+	unsigned int  dma_mode;
 	struct scatterlist *sg;
 	unsigned int resbytes;
 	int dma_num;
@@ -193,7 +192,7 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
 int
 imx_dma_setup_single(int channel, dma_addr_t dma_address,
 		     unsigned int dma_length, unsigned int dev_addr,
-		     dmamode_t dmamode)
+		     unsigned int dmamode)
 {
 	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
 
@@ -288,7 +287,7 @@ int
 imx_dma_setup_sg(int channel,
 		 struct scatterlist *sg, unsigned int sgcount,
 		 unsigned int dma_length, unsigned int dev_addr,
-		 dmamode_t dmamode)
+		 unsigned int dmamode)
 {
 	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
 
@@ -512,6 +511,7 @@ void imx_dma_disable(int channel)
 }
 EXPORT_SYMBOL(imx_dma_disable);
 
+#ifdef CONFIG_ARCH_MX2
 static void imx_dma_watchdog(unsigned long chno)
 {
 	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
@@ -523,6 +523,7 @@ static void imx_dma_watchdog(unsigned long chno)
 	if (imxdma->err_handler)
 		imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT);
 }
+#endif
 
 static irqreturn_t dma_err_handler(int irq, void *dev_id)
 {
@@ -675,7 +676,7 @@ int imx_dma_request(int channel, const char *name)
 {
 	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
 	unsigned long flags;
-	int ret;
+	int ret = 0;
 
 	/* basic sanity checks */
 	if (!name)
@@ -697,6 +698,7 @@ int imx_dma_request(int channel, const char *name)
 	ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
 			NULL);
 	if (ret) {
+		local_irq_restore(flags);
 		printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
 				MXC_INT_DMACH0 + channel, channel);
 		return ret;
@@ -713,7 +715,7 @@ int imx_dma_request(int channel, const char *name)
 	imxdma->sg = NULL;
 
 	local_irq_restore(flags);
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL(imx_dma_request);
 
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index de5c4747453f..ccbd94adc668 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -115,8 +115,8 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 	}
 }
 
-#ifdef CONFIG_ARCH_MX3
-/* MX3 has one interrupt *per* gpio port */
+#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
+/* MX1 and MX3 has one interrupt *per* gpio port */
 static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
 	u32 irq_stat;
@@ -237,7 +237,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
-#ifdef CONFIG_ARCH_MX3
+#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
 		/* setup one handler for each entry */
 		set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
 		set_irq_data(port[i].irq, &port[i]);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index 61e66dac90ef..8f34a05afc87 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -15,7 +15,7 @@
 #define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
 
 /* external interrupt multiplexer */
-#define MXC_EXP_IO_BASE		(MXC_GPIO_BASE + MXC_MAX_GPIO_LINES)
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
 
 #define MXC_VIRTUAL_INTS_BASE	(MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
 #define MXC_SDIO1_CARD_IRQ	MXC_VIRTUAL_INTS_BASE
@@ -28,11 +28,6 @@
 /*
  * MXC UART EVB board level configurations
  */
-
-#define MXC_LL_EXTUART_PADDR	(CS4_BASE_ADDR + 0x20000)
-#define MXC_LL_EXTUART_VADDR	(CS4_BASE_ADDR_VIRT + 0x20000)
-#define MXC_LL_EXTUART_16BIT_BUS
-
 #define MXC_LL_UART_PADDR       UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 745b48864f93..451d510d08c3 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -90,7 +90,7 @@
 #define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
 
-#define MXC_EXP_IO_BASE		(MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES)
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
 #define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
 
 #define EXPIO_INT_LOW_BAT	(MXC_EXP_IO_BASE + 0)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
new file mode 100644
index 000000000000..2b6b316d0f51
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index b9907bebba3b..602768b427e2 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -28,6 +28,9 @@
 #ifdef CONFIG_MACH_PCM038
 #include <mach/board-pcm038.h>
 #endif
+#ifdef CONFIG_MACH_MX31_3DS
+#include <mach/board-mx31pdk.h>
+#endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
index e85fd946116c..b3876cc238ca 100644
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
@@ -22,13 +22,15 @@
  * MA 02110-1301, USA.
  */
 
-#include <asm/dma.h>
-
 #ifndef __ASM_ARCH_MXC_DMA_H
 #define __ASM_ARCH_MXC_DMA_H
 
 #define IMX_DMA_CHANNELS  16
 
+#define DMA_MODE_READ		0
+#define DMA_MODE_WRITE		1
+#define DMA_MODE_MASK		1
+
 #define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR)
 
 #define IMX_DMA_MEMSIZE_32	(0 << 4)
@@ -54,12 +56,12 @@ imx_dma_config_burstlen(int channel, unsigned int burstlen);
 int
 imx_dma_setup_single(int channel, dma_addr_t dma_address,
 		unsigned int dma_length, unsigned int dev_addr,
-		dmamode_t dmamode);
+		unsigned int dmamode);
 
 int
 imx_dma_setup_sg(int channel, struct scatterlist *sg,
 		unsigned int sgcount, unsigned int dma_length,
-		unsigned int dev_addr, dmamode_t dmamode);
+		unsigned int dev_addr, unsigned int dmamode);
 
 int
 imx_dma_setup_handlers(int channel,
diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
deleted file mode 100644
index c822d569a05e..000000000000
--- a/arch/arm/plat-mxc/include/mach/dma.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_DMA_H__
-#define __ASM_ARCH_MXC_DMA_H__
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 11632028f7d1..5f01d60da845 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -9,6 +9,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <mach/hardware.h>
+
 #define AVIC_NIMASK	0x04
 
 	@ this macro disables fast irq (not implemented)
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index 65eedc0d196f..ea509f1090fb 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -27,8 +27,8 @@
 #define gpio_set_value		__gpio_set_value
 #define gpio_cansleep		__gpio_cansleep
 
-#define gpio_to_irq(gpio)	(MXC_MAX_INT_LINES + (gpio))
-#define irq_to_gpio(irq)	((irq) - MXC_MAX_INT_LINES)
+#define gpio_to_irq(gpio)	(MXC_GPIO_IRQ_START + (gpio))
+#define irq_to_gpio(irq)	((irq) - MXC_GPIO_IRQ_START)
 
 struct mxc_gpio_port {
 	void __iomem *base;
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 3caadeeda701..a612d8bb73c8 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -32,6 +32,10 @@
 # endif
 #endif
 
+#ifdef CONFIG_ARCH_MX1
+# include <mach/mx1.h>
+#endif
+
 #include <mach/mxc.h>
 
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h
index 5d4cb1196441..b4f2de769466 100644
--- a/arch/arm/plat-mxc/include/mach/io.h
+++ b/arch/arm/plat-mxc/include/mach/io.h
@@ -25,8 +25,8 @@ __mx3_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
 		/* Access all peripherals below 0x80000000 as nonshared device
 		 * but leave l2cc alone.
 		 */
-		if ((phys_addr < 0x80000000) && ((phys_addr < L2CC_BASE_ADDR) ||
-			(phys_addr >= L2CC_BASE_ADDR + L2CC_SIZE)))
+		if ((phys_addr < 0x80000000) && ((phys_addr < 0x30000000) ||
+			(phys_addr >= 0x30000000 + SZ_1M)))
 			mtype = MT_DEVICE_NONSHARED;
 	}
 
@@ -35,8 +35,8 @@ __mx3_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
 #endif
 
 /* io address mapping macro */
-#define __io(a)			((void __iomem *)(a))
+#define __io(a)		__typesafe_io(a)
 
-#define __mem_pci(a)		(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
index 3d09bfd6c53d..95a383be628e 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
@@ -21,12 +21,6 @@
 
 #include <linux/io.h>
 
-#define MXC_GPIO_ALLOC_MODE_NORMAL	0
-#define MXC_GPIO_ALLOC_MODE_NO_ALLOC	1
-#define MXC_GPIO_ALLOC_MODE_TRY_ALLOC	2
-#define MXC_GPIO_ALLOC_MODE_ALLOC_ONLY	4
-#define MXC_GPIO_ALLOC_MODE_RELEASE	8
-
 /*
  *  GPIO Module and I/O Multiplexer
  *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
@@ -103,7 +97,8 @@
 
 extern void mxc_gpio_mode(int gpio_mode);
 extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-					int alloc_mode, const char *label);
+					const char *label);
+extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
 
 /*-------------------------------------------------------------------------*/
 
@@ -113,9 +108,9 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
  * missing on some (many) pins
  */
 #ifdef CONFIG_ARCH_MX1
-#define PA0_AIN_SPI2_CLK     (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0)
+#define PA0_AIN_SPI2_CLK     (GPIO_PORTA | GPIO_OUT | 0)
 #define PA0_AF_ETMTRACESYNC  (GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD    (GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1)
+#define PA1_AOUT_SPI2_RXD    (GPIO_PORTA | GPIO_IN | 1)
 #define PA1_PF_TIN           (GPIO_PORTA | GPIO_PF | 1)
 #define PA2_PF_PWM0          (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2)
 #define PA3_PF_CSI_MCLK      (GPIO_PORTA | GPIO_PF | 3)
@@ -133,7 +128,7 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PA15_PF_I2C_SDA      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
 #define PA16_PF_I2C_SCL      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
 #define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS     (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17)
+#define PA17_AIN_SPI2_SS     (GPIO_PORTA | GPIO_OUT | 17)
 #define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
 #define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
 #define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
@@ -201,27 +196,27 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PC15_PF_SPI1_SS      (GPIO_PORTC | GPIO_PF | 15)
 #define PC16_PF_SPI1_MISO    (GPIO_PORTC | GPIO_PF | 16)
 #define PC17_PF_SPI1_MOSI    (GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI    (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
-#define PC25_BIN_UART3_DSR   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
-#define PC26_AOUT_UART3_DTR  (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
-#define PC28_BIN_UART3_CTS   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
-#define PC29_AOUT_UART3_RTS  (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX    (GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX   (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
+#define PC24_BIN_UART3_RI    (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
+#define PC25_BIN_UART3_DSR   (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
+#define PC26_AOUT_UART3_DTR  (GPIO_PORTC | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD   (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
+#define PC28_BIN_UART3_CTS   (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
+#define PC29_AOUT_UART3_RTS  (GPIO_PORTC | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX    (GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX   (GPIO_PORTC | GPIO_IN | 31)
 #define PD6_PF_LSCLK         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6)
 #define PD7_PF_REV           (GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR     (GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
-#define PD7_AIN_SPI2_SCLK    (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7)
+#define PD7_AF_UART2_DTR     (GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
+#define PD7_AIN_SPI2_SCLK    (GPIO_PORTD | GPIO_AIN | 7)
 #define PD8_PF_CLS           (GPIO_PORTD | GPIO_PF | 8)
 #define PD8_AF_UART2_DCD     (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8)
-#define PD8_AIN_SPI2_SS      (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8)
+#define PD8_AIN_SPI2_SS      (GPIO_PORTD | GPIO_AIN | 8)
 #define PD9_PF_PS            (GPIO_PORTD | GPIO_PF | 9)
 #define PD9_AF_UART2_RI      (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9)
-#define PD9_AOUT_SPI2_RXD    (GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9)
+#define PD9_AOUT_SPI2_RXD    (GPIO_PORTD | GPIO_IN | 9)
 #define PD10_PF_SPL_SPR      (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10)
 #define PD10_AF_UART2_DSR    (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10)
-#define PD10_AIN_SPI2_TXD    (GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10)
+#define PD10_AIN_SPI2_TXD    (GPIO_PORTD | GPIO_OUT | 10)
 #define PD11_PF_CONTRAST     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11)
 #define PD12_PF_ACD_OE       (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12)
 #define PD13_PF_LP_HSYNC     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13)
@@ -243,7 +238,7 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PD29_PF_LD14         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
 #define PD30_PF_LD15         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30)
 #define PD31_PF_TMR2OUT      (GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD    (GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31)
+#define PD31_BIN_SPI2_TXD    (GPIO_PORTD | GPIO_BIN | 31)
 #endif
 
 #ifdef CONFIG_ARCH_MX2
@@ -279,6 +274,12 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PA29_PF_VSYNC		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 29)
 #define PA30_PF_CONTRAST	(GPIO_PORTA | GPIO_OUT | GPIO_PF | 30)
 #define PA31_PF_OE_ACD		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 31)
+#define PB4_PF_SD2_D0		(GPIO_PORTB | GPIO_PF |  4)
+#define PB5_PF_SD2_D1		(GPIO_PORTB | GPIO_PF |  5)
+#define PB6_PF_SD2_D2		(GPIO_PORTB | GPIO_PF |  6)
+#define PB7_PF_SD2_D3		(GPIO_PORTB | GPIO_PF |  7)
+#define PB8_PF_SD2_CMD		(GPIO_PORTB | GPIO_PF |  8)
+#define PB9_PF_SD2_CLK		(GPIO_PORTB | GPIO_PF |  9)
 #define PB10_PF_CSI_D0		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 10)
 #define PB10_AF_UART6_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 10)
 #define PB11_PF_CSI_D1		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 11)
@@ -315,6 +316,13 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PB31_AF_UART4_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 31)
 #define PC5_PF_I2C2_SDA		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 5)
 #define PC6_PF_I2C2_SCL		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 6)
+#define PC7_PF_USBOTG_DATA5	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 7)
+#define PC8_PF_USBOTG_DATA6	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 8)
+#define PC9_PF_USBOTG_DATA0	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
+#define PC10_PF_USBOTG_DATA2	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 10)
+#define PC11_PF_USBOTG_DATA1	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
+#define PC12_PF_USBOTG_DATA4	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 12)
+#define PC13_PF_USBOTG_DATA3	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 13)
 #define PC16_PF_SSI4_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 16)
 #define PC17_PF_SSI4_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 17)
 #define PC18_PF_SSI4_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 18)
@@ -365,6 +373,9 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PD30_PF_CSPI1_MISO	(GPIO_PORTD | GPIO_IN | GPIO_PF  | 30)
 #define PD31_PF_CSPI1_MOSI	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 31)
 #define PF23_AIN_FEC_TX_EN	(GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
+#define PE0_PF_USBOTG_NXT	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 0)
+#define PE1_PF_USBOTG_STP	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 1)
+#define PE2_PF_USBOTG_DIR	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 2)
 #define PE3_PF_UART2_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
 #define PE4_PF_UART2_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 4)
 #define PE6_PF_UART2_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
@@ -379,18 +390,27 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 15)
 #define PE16_AF_RTCK		(GPIO_PORTE | GPIO_OUT | GPIO_AF | 16)
 #define PE16_PF_RTCK		(GPIO_PORTE | GPIO_OUT | GPIO_PF | 16)
+#define PE18_PF_SDHC1_D0	(GPIO_PORTE | GPIO_PF | 18)
 #define PE18_AF_CSPI3_MISO	(GPIO_PORTE | GPIO_IN  | GPIO_AF | 18)
+#define PE19_PF_SDHC1_D1	(GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SDHC1_D2	(GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SDHC1_D3	(GPIO_PORTE | GPIO_PF | 21)
 #define PE21_AF_CSPI3_SS	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
+#define PE22_PF_SDHC1_CMD	(GPIO_PORTE | GPIO_PF | 22)
 #define PE22_AF_CSPI3_MOSI	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
+#define PE22_PF_SDHC1_CLK	(GPIO_PORTE | GPIO_PF | 23)
 #define PE23_AF_CSPI3_SCLK	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 23)
+#define PE24_PF_USBOTG_CLK	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 24)
+#define PE25_PF_USBOTG_DATA7	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 25)
 #endif
 
 /* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_MAX_INT_LINES) >> 5)
+#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
 
-#define IRQ_GPIOA(x)  (MXC_MAX_INT_LINES + x)
+#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
 #define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
 #define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
 #define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
 
 #endif /* _MXC_GPIO_MX1_MX2_H */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index c9f39c2fb8c6..c9198c0aea18 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -141,7 +141,7 @@ void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
 	((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
 #define IOMUX_TO_IRQ(iomux_pin) \
 	(((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
-	MXC_GPIO_INT_BASE)
+	MXC_GPIO_IRQ_START)
 
 /*
  * This enumeration is constructed based on the Section
@@ -491,6 +491,14 @@ enum iomux_pins {
 #define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RXD1__RXD1		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CTS2__CTS2		IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RTS2__RTS2		IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_TXD2__TXD2		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RXD2__RXD2		IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_PC_RST__CTS5		IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_PC_VS2__RTS5		IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_PC_BVD2__TXD5		IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_PC_BVD1__RXD5		IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_CSPI1_MOSI__MOSI	IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI1_MISO__MISO	IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI1_SCLK__SCLK	IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_FUNC)
@@ -509,6 +517,15 @@ enum iomux_pins {
 #define MX31_PIN_CSPI3_MISO__MISO	IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI3_SCLK__SCLK	IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI3_SPI_RDY__SPI_RDY	IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_BATT_LINE__OWIRE	IOMUX_MODE(MX31_PIN_BATT_LINE, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CS4__CS4		IOMUX_MODE(MX31_PIN_CS4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_DATA3__SD1_DATA3	IOMUX_MODE(MX31_PIN_SD1_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_DATA2__SD1_DATA2	IOMUX_MODE(MX31_PIN_SD1_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_DATA1__SD1_DATA1	IOMUX_MODE(MX31_PIN_SD1_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_DATA0__SD1_DATA0	IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_CLK__SD1_CLK	IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_CMD__SD1_CMD	IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
+
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
 
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index b55bba35e18a..e06d3cb0ee11 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -11,7 +11,37 @@
 #ifndef __ASM_ARCH_MXC_IRQS_H__
 #define __ASM_ARCH_MXC_IRQS_H__
 
-#include <mach/hardware.h>
+/*
+ * So far all i.MX SoCs have 64 internal interrupts
+ */
+#define MXC_INTERNAL_IRQS	64
+
+#define MXC_GPIO_IRQ_START	MXC_INTERNAL_IRQS
+
+#if defined CONFIG_ARCH_MX1
+#define MXC_GPIO_IRQS		(32 * 4)
+#elif defined CONFIG_ARCH_MX2
+#define MXC_GPIO_IRQS		(32 * 6)
+#elif defined CONFIG_ARCH_MX3
+#define MXC_GPIO_IRQS		(32 * 3)
+#endif
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase MXC_BOARD_IRQS, but keep it
+ * within sensible limits.
+ */
+#define MXC_BOARD_IRQ_START	(MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+#define MXC_BOARD_IRQS	16
+
+#define NR_IRQS		(MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
+
 extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
+/* all normal IRQs can be FIQs */
+#define FIQ_START	0
+/* switch betwean IRQ and FIQ */
+extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
+
 #endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index d7a8d3ebed57..0b808399097f 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -11,19 +11,12 @@
 #ifndef __ASM_ARCH_MXC_MEMORY_H__
 #define __ASM_ARCH_MXC_MEMORY_H__
 
-#include <mach/hardware.h>
-
-/*
- * Virtual view <-> DMA view memory address translations
- * This macro is used to translate the virtual address to an address
- * suitable to be passed to set_dma_addr()
- */
-#define __virt_to_bus(a)	__virt_to_phys(a)
-
-/*
- * Used to convert an address for DMA operations to an address that the
- * kernel can use.
- */
-#define __bus_to_virt(a)	__phys_to_virt(a)
+#if defined CONFIG_ARCH_MX1
+#define PHYS_OFFSET		UL(0x08000000)
+#elif defined CONFIG_ARCH_MX2
+#define PHYS_OFFSET		UL(0xA0000000)
+#elif defined CONFIG_ARCH_MX3
+#define PHYS_OFFSET		UL(0x80000000)
+#endif
 
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mtd-xip.h b/arch/arm/plat-mxc/include/mach/mtd-xip.h
new file mode 100644
index 000000000000..1ab1bba5688d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mtd-xip.h
@@ -0,0 +1,34 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>, Teltonika, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/mxc_timer.h>
+
+#ifndef __ARCH_IMX_MTD_XIP_H__
+#define __ARCH_IMX_MTD_XIP_H__
+
+#ifdef CONFIG_ARCH_MX1
+/* AITC registers */
+#define AITC_BASE	IO_ADDRESS(AVIC_BASE_ADDR)
+#define NIPNDH		(AITC_BASE + 0x58)
+#define NIPNDL		(AITC_BASE + 0x5C)
+#define INTENABLEH	(AITC_BASE + 0x10)
+#define INTENABLEL	(AITC_BASE + 0x14)
+/* MTD macros */
+#define xip_irqpending() ((__raw_readl(INTENABLEH) &  __raw_readl(NIPNDH)) \
+			|| (__raw_readl(INTENABLEL) &  __raw_readl(NIPNDL)))
+#define xip_currtime()		(__raw_readl(TIMER_BASE + MXC_TCN))
+#define xip_elapsed_since(x)	(signed)((__raw_readl(TIMER_BASE + MXC_TCN) - (x)) / 96)
+#define xip_cpu_idle()		asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (0))
+#endif /* CONFIG_ARCH_MX1 */
+
+#endif /* __ARCH_IMX_MTD_XIP_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
new file mode 100644
index 000000000000..b92e02324d8e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -0,0 +1,186 @@
+/*
+ * Copyright (C) 1997,1998 Russell King
+ * Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX1_H__
+#define __ASM_ARCH_MXC_MX1_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+#include <mach/vmalloc.h>
+
+/*
+ * Memory map
+ */
+#define IMX_IO_PHYS	0x00200000
+#define IMX_IO_SIZE	0x00100000
+#define IMX_IO_BASE	VMALLOC_END
+
+#define IMX_CS0_PHYS	0x10000000
+#define IMX_CS0_SIZE	0x02000000
+
+#define IMX_CS1_PHYS	0x12000000
+#define IMX_CS1_SIZE	0x01000000
+
+#define IMX_CS2_PHYS	0x13000000
+#define IMX_CS2_SIZE	0x01000000
+
+#define IMX_CS3_PHYS	0x14000000
+#define IMX_CS3_SIZE	0x01000000
+
+#define IMX_CS4_PHYS	0x15000000
+#define IMX_CS4_SIZE	0x01000000
+
+#define IMX_CS5_PHYS	0x16000000
+#define IMX_CS5_SIZE	0x01000000
+
+/*
+ *  Register BASEs, based on OFFSETs
+ */
+#define AIPI1_BASE_ADDR		(0x00000 + IMX_IO_PHYS)
+#define WDT_BASE_ADDR		(0x01000 + IMX_IO_PHYS)
+#define TIM1_BASE_ADDR		(0x02000 + IMX_IO_PHYS)
+#define TIM2_BASE_ADDR		(0x03000 + IMX_IO_PHYS)
+#define RTC_BASE_ADDR		(0x04000 + IMX_IO_PHYS)
+#define LCDC_BASE_ADDR		(0x05000 + IMX_IO_PHYS)
+#define UART1_BASE_ADDR		(0x06000 + IMX_IO_PHYS)
+#define UART2_BASE_ADDR		(0x07000 + IMX_IO_PHYS)
+#define PWM_BASE_ADDR		(0x08000 + IMX_IO_PHYS)
+#define DMA_BASE_ADDR		(0x09000 + IMX_IO_PHYS)
+#define AIPI2_BASE_ADDR		(0x10000 + IMX_IO_PHYS)
+#define SIM_BASE_ADDR		(0x11000 + IMX_IO_PHYS)
+#define USBD_BASE_ADDR		(0x12000 + IMX_IO_PHYS)
+#define SPI1_BASE_ADDR		(0x13000 + IMX_IO_PHYS)
+#define MMC_BASE_ADDR		(0x14000 + IMX_IO_PHYS)
+#define ASP_BASE_ADDR		(0x15000 + IMX_IO_PHYS)
+#define BTA_BASE_ADDR		(0x16000 + IMX_IO_PHYS)
+#define I2C_BASE_ADDR		(0x17000 + IMX_IO_PHYS)
+#define SSI_BASE_ADDR		(0x18000 + IMX_IO_PHYS)
+#define SPI2_BASE_ADDR		(0x19000 + IMX_IO_PHYS)
+#define MSHC_BASE_ADDR		(0x1A000 + IMX_IO_PHYS)
+#define CCM_BASE_ADDR		(0x1B000 + IMX_IO_PHYS)
+#define SCM_BASE_ADDR		(0x1B804 + IMX_IO_PHYS)
+#define GPIO_BASE_ADDR		(0x1C000 + IMX_IO_PHYS)
+#define EIM_BASE_ADDR		(0x20000 + IMX_IO_PHYS)
+#define SDRAMC_BASE_ADDR	(0x21000 + IMX_IO_PHYS)
+#define MMA_BASE_ADDR		(0x22000 + IMX_IO_PHYS)
+#define AVIC_BASE_ADDR		(0x23000 + IMX_IO_PHYS)
+#define CSI_BASE_ADDR		(0x24000 + IMX_IO_PHYS)
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)	((x) - IMX_IO_PHYS + IMX_IO_BASE)
+
+/* define macros needed for entry-macro.S */
+#define AVIC_IO_ADDRESS(x)	IO_ADDRESS(x)
+
+/* fixed interrput numbers */
+#define INT_SOFTINT		0
+#define CSI_INT			6
+#define DSPA_MAC_INT		7
+#define DSPA_INT		8
+#define COMP_INT		9
+#define MSHC_XINT		10
+#define GPIO_INT_PORTA		11
+#define GPIO_INT_PORTB		12
+#define GPIO_INT_PORTC		13
+#define LCDC_INT		14
+#define SIM_INT			15
+#define SIM_DATA_INT		16
+#define RTC_INT			17
+#define RTC_SAMINT		18
+#define UART2_MINT_PFERR	19
+#define UART2_MINT_RTS		20
+#define UART2_MINT_DTR		21
+#define UART2_MINT_UARTC	22
+#define UART2_MINT_TX		23
+#define UART2_MINT_RX		24
+#define UART1_MINT_PFERR	25
+#define UART1_MINT_RTS		26
+#define UART1_MINT_DTR		27
+#define UART1_MINT_UARTC	28
+#define UART1_MINT_TX		29
+#define UART1_MINT_RX		30
+#define VOICE_DAC_INT		31
+#define VOICE_ADC_INT		32
+#define PEN_DATA_INT		33
+#define PWM_INT			34
+#define SDHC_INT		35
+#define I2C_INT			39
+#define CSPI_INT		41
+#define SSI_TX_INT		42
+#define SSI_TX_ERR_INT		43
+#define SSI_RX_INT		44
+#define SSI_RX_ERR_INT		45
+#define TOUCH_INT		46
+#define USBD_INT0		47
+#define USBD_INT1		48
+#define USBD_INT2		49
+#define USBD_INT3		50
+#define USBD_INT4		51
+#define USBD_INT5		52
+#define USBD_INT6		53
+#define BTSYS_INT		55
+#define BTTIM_INT		56
+#define BTWUI_INT		57
+#define TIM2_INT		58
+#define TIM1_INT		59
+#define DMA_ERR			60
+#define DMA_INT			61
+#define GPIO_INT_PORTD		62
+#define WDT_INT			63
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR		 	0x1C
+#define GPIO_GDIR	 	0x00
+#define GPIO_PSR	 	0x24
+#define GPIO_ICR1	 	0x28
+#define GPIO_ICR2	 	0x2C
+#define GPIO_IMR	 	0x30
+#define GPIO_ISR	 	0x34
+#define GPIO_INT_LOW_LEV	0x3
+#define GPIO_INT_HIGH_LEV	0x2
+#define GPIO_INT_RISE_EDGE 	0x0
+#define GPIO_INT_FALL_EDGE	0x1
+#define GPIO_INT_NONE		0x4
+
+/* DMA */
+#define DMA_REQ_UART3_T		2
+#define DMA_REQ_UART3_R		3
+#define DMA_REQ_SSI2_T		4
+#define DMA_REQ_SSI2_R		5
+#define DMA_REQ_CSI_STAT	6
+#define DMA_REQ_CSI_R		7
+#define DMA_REQ_MSHC		8
+#define DMA_REQ_DSPA_DCT_DOUT	9
+#define DMA_REQ_DSPA_DCT_DIN	10
+#define DMA_REQ_DSPA_MAC	11
+#define DMA_REQ_EXT		12
+#define DMA_REQ_SDHC		13
+#define DMA_REQ_SPI1_R		14
+#define DMA_REQ_SPI1_T		15
+#define DMA_REQ_SSI_T		16
+#define DMA_REQ_SSI_R		17
+#define DMA_REQ_ASP_DAC		18
+#define DMA_REQ_ASP_ADC		19
+#define DMA_REQ_USP_EP(x)	(20 + (x))
+#define DMA_REQ_SPI2_R		26
+#define DMA_REQ_SPI2_T		27
+#define DMA_REQ_UART2_T		28
+#define DMA_REQ_UART2_R		29
+#define DMA_REQ_UART1_T		30
+#define DMA_REQ_UART1_R		31
+
+/* mandatory for CONFIG_LL_DEBUG */
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /*  __ASM_ARCH_MXC_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index a86db64744a1..0313be720552 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -72,7 +72,8 @@
 /* for mx27*/
 #define OTG_BASE_ADDR           USBOTG_BASE_ADDR
 #define SAHARA_BASE_ADDR        (AIPI_BASE_ADDR + 0x25000)
-#define EMMA_BASE_ADDR          (AIPI_BASE_ADDR + 0x26400)
+#define EMMA_PP_BASE_ADDR       (AIPI_BASE_ADDR + 0x26000)
+#define EMMA_PRP_BASE_ADDR      (AIPI_BASE_ADDR + 0x26400)
 #define CCM_BASE_ADDR           (AIPI_BASE_ADDR + 0x27000)
 #define SYSCTRL_BASE_ADDR       (AIPI_BASE_ADDR + 0x27800)
 #define IIM_BASE_ADDR           (AIPI_BASE_ADDR + 0x28000)
@@ -288,16 +289,4 @@ extern int mx27_revision(void);
 /* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
 #define ARCH_NR_GPIOS		(192 + 16)
 
-/* OS clock tick rate */
-#define CLOCK_TICK_RATE         13300000
-
-/* Start of RAM */
-#define PHYS_OFFSET		SDRAM_BASE_ADDR
-
-/* max interrupt lines count */
-#define NR_IRQS			256
-
-/* count of internal interrupt sources */
-#define MXC_MAX_INT_LINES	64
-
 #endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 0536f8917bc0..de026654b00e 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -15,11 +15,6 @@
 #error "Do not include directly."
 #endif
 
-/*!
- * defines the hardware clock tick rate
- */
-#define CLOCK_TICK_RATE		16625000
-
 /*
  * MX31 memory map:
  *
@@ -244,9 +239,6 @@
 #define PCMCIA_IO_ADDRESS(x) \
 	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
 
-/* Start of physical RAM - On many MX31 platforms, this is the first SDRAM bank (CSD0) */
-#define PHYS_OFFSET             CSD0_BASE_ADDR
-
 /*
  * Interrupt numbers
  */
@@ -315,23 +307,6 @@
 #define MXC_INT_EXT_WDOG	62
 #define MXC_INT_EXT_TV		63
 
-#define MXC_MAX_INT_LINES	64
-
-#define MXC_GPIO_INT_BASE	MXC_MAX_INT_LINES
-#define MXC_MAX_GPIO_LINES      (GPIO_NUM_PIN * GPIO_PORT_NUM)
-#define MXC_MAX_VIRTUAL_INTS	16
-
-#define NR_IRQS (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES + MXC_MAX_VIRTUAL_INTS)
-
-/*!
- * Number of GPIO port as defined in the IC Spec
- */
-#define GPIO_PORT_NUM		3
-/*!
- * Number of GPIO pins per port
- */
-#define GPIO_NUM_PIN		32
-
 #define PROD_SIGNATURE		0x1	/* For MX31 */
 
 /* silicon revisions specific to i.MX31 */
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
index 130aebfbe168..6c19a134744b 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_timer.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_timer.h
@@ -26,7 +26,7 @@
 #include <linux/clk.h>
 #include <mach/hardware.h>
 
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
 #define TIMER_BASE		IO_ADDRESS(TIM1_BASE_ADDR)
 #define TIMER_INTERRUPT		TIM1_INT
 
@@ -65,7 +65,7 @@ static void gpt_irq_acknowledge(void)
 {
 	__raw_writel(0, TIMER_BASE + MXC_TSTAT);
 }
-#endif /* CONFIG_ARCH_IMX */
+#endif /* CONFIG_ARCH_MX1 */
 
 #ifdef CONFIG_ARCH_MX2
 #define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 0b0af0253e91..07b4a73c9d2f 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -20,6 +20,12 @@
 #ifndef __ASM_ARCH_MXC_TIMEX_H__
 #define __ASM_ARCH_MXC_TIMEX_H__
 
-#include <mach/hardware.h>	/* for CLOCK_TICK_RATE */
+#if defined CONFIG_ARCH_MX1
+#define CLOCK_TICK_RATE		16000000
+#elif defined CONFIG_ARCH_MX2
+#define CLOCK_TICK_RATE		13300000
+#elif defined CONFIG_ARCH_MX3
+#define CLOCK_TICK_RATE		16625000
+#endif
 
 #endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
index d97387aa9a42..df6f18395686 100644
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -110,12 +110,13 @@ void mxc_gpio_mode(int gpio_mode)
 EXPORT_SYMBOL(mxc_gpio_mode);
 
 int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-				int alloc_mode, const char *label)
+		const char *label)
 {
 	const int *p = pin_list;
 	int i;
 	unsigned gpio;
 	unsigned mode;
+	int ret = -EINVAL;
 
 	for (i = 0; i < count; i++) {
 		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
@@ -124,33 +125,33 @@ int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 		if (gpio >= (GPIO_PORT_MAX + 1) * 32)
 			goto setup_error;
 
-		if (alloc_mode & MXC_GPIO_ALLOC_MODE_RELEASE)
-			gpio_free(gpio);
-		else if (!(alloc_mode & MXC_GPIO_ALLOC_MODE_NO_ALLOC))
-			if (gpio_request(gpio, label)
-			   && !(alloc_mode & MXC_GPIO_ALLOC_MODE_TRY_ALLOC))
-				goto setup_error;
+		ret = gpio_request(gpio, label);
+		if (ret)
+			goto setup_error;
 
-		if (!(alloc_mode & (MXC_GPIO_ALLOC_MODE_ALLOC_ONLY |
-				    MXC_GPIO_ALLOC_MODE_RELEASE)))
-			mxc_gpio_mode(gpio | mode);
+		mxc_gpio_mode(gpio | mode);
 
 		p++;
 	}
 	return 0;
 
 setup_error:
-	if (alloc_mode & (MXC_GPIO_ALLOC_MODE_NO_ALLOC |
-	    MXC_GPIO_ALLOC_MODE_TRY_ALLOC))
-		return -EINVAL;
+	mxc_gpio_release_multiple_pins(pin_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
 
-	while (p != pin_list) {
-		p--;
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
+{
+	const int *p = pin_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		unsigned gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
 		gpio_free(gpio);
+		p++;
 	}
 
-	return -EINVAL;
 }
-EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
+EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
 
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index d862c9e5f8db..6e7578a3514b 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -17,9 +17,12 @@
  * MA  02110-1301, USA.
  */
 
+#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <mach/common.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
 
 #define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
 #define AVIC_INTCNTL		(AVIC_BASE + 0x00)	/* int control reg */
@@ -65,6 +68,28 @@ void imx_irq_set_priority(unsigned char irq, unsigned char prio)
 EXPORT_SYMBOL(imx_irq_set_priority);
 #endif
 
+#ifdef CONFIG_FIQ
+int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
+{
+	unsigned int irqt;
+
+	if (irq >= MXC_INTERNAL_IRQS)
+		return -EINVAL;
+
+	if (irq < MXC_INTERNAL_IRQS / 2) {
+		irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL);
+	} else {
+		irq -= MXC_INTERNAL_IRQS / 2;
+		irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_set_irq_fiq);
+#endif /* CONFIG_FIQ */
+
 /* Disable interrupt number "irq" in the AVIC */
 static void mxc_mask_irq(unsigned int irq)
 {
@@ -91,7 +116,6 @@ static struct irq_chip mxc_avic_chip = {
 void __init mxc_init_irq(void)
 {
 	int i;
-	u32 reg;
 
 	/* put the AVIC into the reset value with
 	 * all interrupts disabled
@@ -106,7 +130,7 @@ void __init mxc_init_irq(void)
 	/* all IRQ no FIQ */
 	__raw_writel(0, AVIC_INTTYPEH);
 	__raw_writel(0, AVIC_INTTYPEL);
-	for (i = 0; i < MXC_MAX_INT_LINES; i++) {
+	for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
 		set_irq_chip(i, &mxc_avic_chip);
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID);
@@ -119,5 +143,10 @@ void __init mxc_init_irq(void)
 	/* init architectures chained interrupt handler */
 	mxc_register_gpios();
 
+#ifdef CONFIG_FIQ
+	/* Initialize FIQ */
+	init_FIQ();
+#endif
+
 	printk(KERN_INFO "MXC IRQ initialized\n");
 }
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index a94f0c44ebc8..46d3b0b9ce69 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -14,9 +14,11 @@ config ARCH_OMAP1
 
 config ARCH_OMAP2
 	bool "TI OMAP2"
+	select CPU_V6
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
+	select CPU_V7
 
 endchoice
 
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index e31154b15d9e..f6684832ca8f 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -69,15 +69,15 @@ int __init debug_card_init(u32 addr, unsigned gpio)
 	smc91x_resources[0].start = addr + 0x300;
 	smc91x_resources[0].end   = addr + 0x30f;
 
-	smc91x_resources[1].start = OMAP_GPIO_IRQ(gpio);
-	smc91x_resources[1].end   = OMAP_GPIO_IRQ(gpio);
+	smc91x_resources[1].start = gpio_to_irq(gpio);
+	smc91x_resources[1].end   = gpio_to_irq(gpio);
 
-	status = omap_request_gpio(gpio);
+	status = gpio_request(gpio, "SMC91x irq");
 	if (status < 0) {
 		printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio);
 		return status;
 	}
-	omap_set_gpio_direction(gpio, 1);
+	gpio_direction_input(gpio);
 
 	led_resources[0].start = addr;
 	led_resources[0].end   = addr + SZ_4K - 1;
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 2f4c0cabfd34..be4eefda4767 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -83,8 +83,8 @@ static void h2p2_dbg_leds_event(led_event_t evt)
 		/* all leds off during suspend or shutdown */
 
 		if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
-			omap_set_gpio_dataout(GPIO_TIMER, 0);
-			omap_set_gpio_dataout(GPIO_IDLE, 0);
+			gpio_set_value(GPIO_TIMER, 0);
+			gpio_set_value(GPIO_IDLE, 0);
 		}
 
 		__raw_writew(~0, &fpga->leds);
@@ -107,7 +107,7 @@ static void h2p2_dbg_leds_event(led_event_t evt)
 		if (machine_is_omap_perseus2() || machine_is_omap_h4())
 			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
 		else {
-			omap_set_gpio_dataout(GPIO_TIMER,
+			gpio_set_value(GPIO_TIMER,
 					led_state & LED_TIMER_ON);
 			goto done;
 		}
@@ -121,7 +121,7 @@ static void h2p2_dbg_leds_event(led_event_t evt)
 		if (machine_is_omap_perseus2() || machine_is_omap_h4())
 			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
 		else {
-			omap_set_gpio_dataout(GPIO_IDLE, 1);
+			gpio_set_value(GPIO_IDLE, 1);
 			goto done;
 		}
 
@@ -131,7 +131,7 @@ static void h2p2_dbg_leds_event(led_event_t evt)
 		if (machine_is_omap_perseus2() || machine_is_omap_h4())
 			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
 		else {
-			omap_set_gpio_dataout(GPIO_IDLE, 0);
+			gpio_set_value(GPIO_IDLE, 0);
 			goto done;
 		}
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 0cb2b22388e9..ac15c23fd5da 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -192,202 +192,48 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 
 /*-------------------------------------------------------------------------*/
 
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
 	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-#define	OMAP_MMC1_BASE		0x4809c000
-#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x1fc)
-#define	OMAP_MMC1_INT		INT_24XX_MMC_IRQ
+#define OMAP_MMC_NR_RES		2
 
-#define	OMAP_MMC2_BASE		0x480b4000
-#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x1fc)
-#define	OMAP_MMC2_INT		INT_24XX_MMC2_IRQ
-
-#else
-
-#define	OMAP_MMC1_BASE		0xfffb7800
-#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x7f)
-#define OMAP_MMC1_INT		INT_MMC
-
-#define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
-#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x7f)
-#define	OMAP_MMC2_INT		INT_1610_MMC2
-
-#endif
-
-static struct omap_mmc_platform_data mmc1_data;
-
-static u64 mmc1_dmamask = 0xffffffff;
-
-static struct resource mmc1_resources[] = {
-	{
-		.start		= OMAP_MMC1_BASE,
-		.end		= OMAP_MMC1_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP_MMC1_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mmc_omap_device1 = {
-	.name		= "mmci-omap",
-	.id		= 1,
-	.dev = {
-		.dma_mask	= &mmc1_dmamask,
-		.platform_data	= &mmc1_data,
-	},
-	.num_resources	= ARRAY_SIZE(mmc1_resources),
-	.resource	= mmc1_resources,
-};
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
-	defined(CONFIG_ARCH_OMAP34XX)
-
-static struct omap_mmc_platform_data mmc2_data;
-
-static u64 mmc2_dmamask = 0xffffffff;
-
-static struct resource mmc2_resources[] = {
-	{
-		.start		= OMAP_MMC2_BASE,
-		.end		= OMAP_MMC2_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP_MMC2_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mmc_omap_device2 = {
-	.name		= "mmci-omap",
-	.id		= 2,
-	.dev = {
-		.dma_mask	= &mmc2_dmamask,
-		.platform_data	= &mmc2_data,
-	},
-	.num_resources	= ARRAY_SIZE(mmc2_resources),
-	.resource	= mmc2_resources,
-};
-#endif
-
-static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
-{
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
-		return;
-
-	if (mmc_conf->mmc[0].enabled) {
-		if (cpu_is_omap24xx()) {
-			omap_cfg_reg(H18_24XX_MMC_CMD);
-			omap_cfg_reg(H15_24XX_MMC_CLKI);
-			omap_cfg_reg(G19_24XX_MMC_CLKO);
-			omap_cfg_reg(F20_24XX_MMC_DAT0);
-			omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
-			omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
-		} else {
-			omap_cfg_reg(MMC_CMD);
-			omap_cfg_reg(MMC_CLK);
-			omap_cfg_reg(MMC_DAT0);
-			if (cpu_is_omap1710()) {
-				omap_cfg_reg(M15_1710_MMC_CLKI);
-				omap_cfg_reg(P19_1710_MMC_CMDDIR);
-				omap_cfg_reg(P20_1710_MMC_DATDIR0);
-			}
-		}
-		if (mmc_conf->mmc[0].wire4) {
-			if (cpu_is_omap24xx()) {
-				omap_cfg_reg(H14_24XX_MMC_DAT1);
-				omap_cfg_reg(E19_24XX_MMC_DAT2);
-				omap_cfg_reg(D19_24XX_MMC_DAT3);
-				omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
-				omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
-				omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
-			} else {
-				omap_cfg_reg(MMC_DAT1);
-				/* NOTE:  DAT2 can be on W10 (here) or M15 */
-				if (!mmc_conf->mmc[0].nomux)
-					omap_cfg_reg(MMC_DAT2);
-				omap_cfg_reg(MMC_DAT3);
-			}
-		}
-	}
-
-#ifdef	CONFIG_ARCH_OMAP16XX
-	/* block 2 is on newer chips, and has many pinout options */
-	if (mmc_conf->mmc[1].enabled) {
-		if (!mmc_conf->mmc[1].nomux) {
-			omap_cfg_reg(Y8_1610_MMC2_CMD);
-			omap_cfg_reg(Y10_1610_MMC2_CLK);
-			omap_cfg_reg(R18_1610_MMC2_CLKIN);
-			omap_cfg_reg(W8_1610_MMC2_DAT0);
-			if (mmc_conf->mmc[1].wire4) {
-				omap_cfg_reg(V8_1610_MMC2_DAT1);
-				omap_cfg_reg(W15_1610_MMC2_DAT2);
-				omap_cfg_reg(R10_1610_MMC2_DAT3);
-			}
-
-			/* These are needed for the level shifter */
-			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
-			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
-			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
-		}
-
-		/* Feedback clock must be set on OMAP-1710 MMC2 */
-		if (cpu_is_omap1710())
-			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
-				     MOD_CONF_CTRL_1);
-	}
-#endif
-}
-
-static void __init omap_init_mmc(void)
+/*
+ * Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
+ */
+int __init omap_mmc_add(int id, unsigned long base, unsigned long size,
+		unsigned int irq, struct omap_mmc_platform_data *data)
 {
-	const struct omap_mmc_config	*mmc_conf;
-
-	/* NOTE:  assumes MMC was never (wrongly) enabled */
-	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
-	if (!mmc_conf)
-		return;
-
-	omap_init_mmc_conf(mmc_conf);
-
-	if (mmc_conf->mmc[0].enabled) {
-		mmc1_data.conf = mmc_conf->mmc[0];
-		(void) platform_device_register(&mmc_omap_device1);
-	}
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
-	defined(CONFIG_ARCH_OMAP34XX)
-	if (mmc_conf->mmc[1].enabled) {
-		mmc2_data.conf = mmc_conf->mmc[1];
-		(void) platform_device_register(&mmc_omap_device2);
-	}
-#endif
-}
+	struct platform_device *pdev;
+	struct resource res[OMAP_MMC_NR_RES];
+	int ret;
+
+	pdev = platform_device_alloc("mmci-omap", id);
+	if (!pdev)
+		return -ENOMEM;
+
+	memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
+	res[0].start = base;
+	res[0].end = base + size - 1;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = res[1].end = irq;
+	res[1].flags = IORESOURCE_IRQ;
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret == 0)
+		ret = platform_device_add_data(pdev, data, sizeof(*data));
+	if (ret)
+		goto fail;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto fail;
+	return 0;
 
-void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
-{
-	switch (host) {
-	case 1:
-		mmc1_data = *info;
-		break;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
-	defined(CONFIG_ARCH_OMAP34XX)
-	case 2:
-		mmc2_data = *info;
-		break;
-#endif
-	default:
-		BUG();
-	}
+fail:
+	platform_device_put(pdev);
+	return ret;
 }
 
-#else
-static inline void omap_init_mmc(void) {}
-void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
 #endif
 
 /*-------------------------------------------------------------------------*/
@@ -532,7 +378,6 @@ static int __init omap_init_devices(void)
 	 */
 	omap_init_dsp();
 	omap_init_kp();
-	omap_init_mmc();
 	omap_init_uwire();
 	omap_init_wdt();
 	omap_init_rng();
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 50f8b4ad9a09..692d2b495af3 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -29,7 +29,7 @@
 
 #include <asm/system.h>
 #include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
 
 #include <mach/tc.h>
 
@@ -1848,9 +1848,22 @@ static int omap2_dma_handle_ch(int ch)
 		printk(KERN_INFO
 		       "DMA synchronization event drop occurred with device "
 		       "%d\n", dma_chan[ch].dev_id);
-	if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
+	if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
 		printk(KERN_INFO "DMA transaction error with device %d\n",
 		       dma_chan[ch].dev_id);
+		if (cpu_class_is_omap2()) {
+			/* Errata: sDMA Channel is not disabled
+			 * after a transaction error. So we explicitely
+			 * disable the channel
+			 */
+			u32 ccr;
+
+			ccr = dma_read(CCR(ch));
+			ccr &= ~OMAP_DMA_CCR_EN;
+			dma_write(ccr, CCR(ch));
+			dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
+		}
+	}
 	if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
 		printk(KERN_INFO "DMA secure error with device %d\n",
 		       dma_chan[ch].dev_id);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 963c31cd1541..e4f0ce04ba92 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -539,10 +539,6 @@ void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
 
-	/* REVISIT: hw feature, ttgr overtaking tldr? */
-	while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)))
-		cpu_relax();
-
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 }
 
@@ -553,14 +549,15 @@ void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
 	u32 l;
 
 	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	if (autoreload)
+	if (autoreload) {
 		l |= OMAP_TIMER_CTRL_AR;
-	else
+		omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+	} else {
 		l &= ~OMAP_TIMER_CTRL_AR;
+	}
 	l |= OMAP_TIMER_CTRL_ST;
 
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load);
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 }
 
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 8679fbca6bbe..07b6968a7d16 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -101,6 +101,7 @@
 #define OMAP24XX_GPIO_IRQSTATUS2	0x0028
 #define OMAP24XX_GPIO_IRQENABLE2	0x002c
 #define OMAP24XX_GPIO_IRQENABLE1	0x001c
+#define OMAP24XX_GPIO_WAKE_EN		0x0020
 #define OMAP24XX_GPIO_CTRL		0x0030
 #define OMAP24XX_GPIO_OE		0x0034
 #define OMAP24XX_GPIO_DATAIN		0x0038
@@ -151,6 +152,7 @@ struct gpio_bank {
 	u32 level_mask;
 	spinlock_t lock;
 	struct gpio_chip chip;
+	struct clk *dbck;
 };
 
 #define METHOD_MPUIO		0
@@ -243,6 +245,8 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 		return &gpio_bank[gpio >> 5];
 	if (cpu_is_omap34xx())
 		return &gpio_bank[gpio >> 5];
+	BUG();
+	return NULL;
 }
 
 static inline int get_gpio_index(int gpio)
@@ -331,19 +335,6 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 	__raw_writel(l, reg);
 }
 
-void omap_set_gpio_direction(int gpio, int is_input)
-{
-	struct gpio_bank *bank;
-	unsigned long flags;
-
-	if (check_gpio(gpio) < 0)
-		return;
-	bank = get_gpio_bank(gpio);
-	spin_lock_irqsave(&bank->lock, flags);
-	_set_gpio_direction(bank, get_gpio_index(gpio), is_input);
-	spin_unlock_irqrestore(&bank->lock, flags);
-}
-
 static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 {
 	void __iomem *reg = bank->base;
@@ -405,20 +396,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 	__raw_writel(l, reg);
 }
 
-void omap_set_gpio_dataout(int gpio, int enable)
-{
-	struct gpio_bank *bank;
-	unsigned long flags;
-
-	if (check_gpio(gpio) < 0)
-		return;
-	bank = get_gpio_bank(gpio);
-	spin_lock_irqsave(&bank->lock, flags);
-	_set_gpio_dataout(bank, get_gpio_index(gpio), enable);
-	spin_unlock_irqrestore(&bank->lock, flags);
-}
-
-int omap_get_gpio_datain(int gpio)
+static int __omap_get_gpio_datain(int gpio)
 {
 	struct gpio_bank *bank;
 	void __iomem *reg;
@@ -472,6 +450,7 @@ void omap_set_gpio_debounce(int gpio, int enable)
 {
 	struct gpio_bank *bank;
 	void __iomem *reg;
+	unsigned long flags;
 	u32 val, l = 1 << get_gpio_index(gpio);
 
 	if (cpu_class_is_omap1())
@@ -479,16 +458,28 @@ void omap_set_gpio_debounce(int gpio, int enable)
 
 	bank = get_gpio_bank(gpio);
 	reg = bank->base;
-
 	reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+
+	spin_lock_irqsave(&bank->lock, flags);
 	val = __raw_readl(reg);
 
-	if (enable)
+	if (enable && !(val & l))
 		val |= l;
-	else
+	else if (!enable && (val & l))
 		val &= ~l;
+	else
+		goto done;
+
+	if (cpu_is_omap34xx()) {
+		if (enable)
+			clk_enable(bank->dbck);
+		else
+			clk_disable(bank->dbck);
+	}
 
 	__raw_writel(val, reg);
+done:
+	spin_unlock_irqrestore(&bank->lock, flags);
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce);
 
@@ -905,26 +896,17 @@ static int gpio_wake_enable(unsigned int irq, unsigned int enable)
 	return retval;
 }
 
-int omap_request_gpio(int gpio)
+static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 {
-	struct gpio_bank *bank;
+	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
 	unsigned long flags;
-	int status;
-
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
-
-	status = gpio_request(gpio, NULL);
-	if (status < 0)
-		return status;
 
-	bank = get_gpio_bank(gpio);
 	spin_lock_irqsave(&bank->lock, flags);
 
 	/* Set trigger to none. You need to enable the desired trigger with
 	 * request_irq() or set_irq_type().
 	 */
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
+	_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (bank->method == METHOD_GPIO_1510) {
@@ -932,7 +914,7 @@ int omap_request_gpio(int gpio)
 
 		/* Claim the pin for MPU */
 		reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
-		__raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg);
+		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
 	}
 #endif
 	spin_unlock_irqrestore(&bank->lock, flags);
@@ -940,39 +922,28 @@ int omap_request_gpio(int gpio)
 	return 0;
 }
 
-void omap_free_gpio(int gpio)
+static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 {
-	struct gpio_bank *bank;
+	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
 	unsigned long flags;
 
-	if (check_gpio(gpio) < 0)
-		return;
-	bank = get_gpio_bank(gpio);
 	spin_lock_irqsave(&bank->lock, flags);
-	if (unlikely(!gpiochip_is_requested(&bank->chip,
-				get_gpio_index(gpio)))) {
-		spin_unlock_irqrestore(&bank->lock, flags);
-		printk(KERN_ERR "omap-gpio: GPIO %d wasn't reserved!\n", gpio);
-		dump_stack();
-		return;
-	}
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (bank->method == METHOD_GPIO_1610) {
 		/* Disable wake-up during idle for dynamic tick */
 		void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
-		__raw_writel(1 << get_gpio_index(gpio), reg);
+		__raw_writel(1 << offset, reg);
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX) {
 		/* Disable wake-up during idle for dynamic tick */
 		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
-		__raw_writel(1 << get_gpio_index(gpio), reg);
+		__raw_writel(1 << offset, reg);
 	}
 #endif
-	_reset_gpio(bank, gpio);
+	_reset_gpio(bank, bank->chip.base + offset);
 	spin_unlock_irqrestore(&bank->lock, flags);
-	gpio_free(gpio);
 }
 
 /*
@@ -1251,7 +1222,7 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset)
 
 static int gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return omap_get_gpio_datain(chip->base + offset);
+	return __omap_get_gpio_datain(chip->base + offset);
 }
 
 static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
@@ -1278,6 +1249,14 @@ static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	spin_unlock_irqrestore(&bank->lock, flags);
 }
 
+static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	return bank->virtual_irq_start + offset;
+}
+
 /*---------------------------------------------------------------------*/
 
 static int initialized;
@@ -1295,7 +1274,6 @@ static struct clk * gpio5_fck;
 #endif
 
 #if defined(CONFIG_ARCH_OMAP3)
-static struct clk *gpio_fclks[OMAP34XX_NR_GPIOS];
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
@@ -1309,9 +1287,7 @@ static int __init _omap_gpio_init(void)
 	int i;
 	int gpio = 0;
 	struct gpio_bank *bank;
-#if defined(CONFIG_ARCH_OMAP3)
 	char clk_name[11];
-#endif
 
 	initialized = 1;
 
@@ -1366,12 +1342,6 @@ static int __init _omap_gpio_init(void)
 				printk(KERN_ERR "Could not get %s\n", clk_name);
 			else
 				clk_enable(gpio_iclks[i]);
-			sprintf(clk_name, "gpio%d_fck", i + 1);
-			gpio_fclks[i] = clk_get(NULL, clk_name);
-			if (IS_ERR(gpio_fclks[i]))
-				printk(KERN_ERR "Could not get %s\n", clk_name);
-			else
-				clk_enable(gpio_fclks[i]);
 		}
 	}
 #endif
@@ -1478,10 +1448,13 @@ static int __init _omap_gpio_init(void)
 		/* REVISIT eventually switch from OMAP-specific gpio structs
 		 * over to the generic ones
 		 */
+		bank->chip.request = omap_gpio_request;
+		bank->chip.free = omap_gpio_free;
 		bank->chip.direction_input = gpio_input;
 		bank->chip.get = gpio_get;
 		bank->chip.direction_output = gpio_output;
 		bank->chip.set = gpio_set;
+		bank->chip.to_irq = gpio_2irq;
 		if (bank_is_mpuio(bank)) {
 			bank->chip.label = "mpuio";
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -1510,6 +1483,13 @@ static int __init _omap_gpio_init(void)
 		}
 		set_irq_chained_handler(bank->irq, gpio_irq_handler);
 		set_irq_data(bank->irq, bank);
+
+		if (cpu_is_omap34xx()) {
+			sprintf(clk_name, "gpio%d_dbck", i + 1);
+			bank->dbck = clk_get(NULL, clk_name);
+			if (IS_ERR(bank->dbck))
+				printk(KERN_ERR "Could not get %s\n", clk_name);
+		}
 	}
 
 	/* Enable system clock for GPIO module.
@@ -1551,7 +1531,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
-			wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
+			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
@@ -1574,7 +1554,7 @@ static int omap_gpio_resume(struct sys_device *dev)
 {
 	int i;
 
-	if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+	if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
 		return 0;
 
 	for (i = 0; i < gpio_bank_count; i++) {
@@ -1738,12 +1718,6 @@ static int __init omap_gpio_sysinit(void)
 	return ret;
 }
 
-EXPORT_SYMBOL(omap_request_gpio);
-EXPORT_SYMBOL(omap_free_gpio);
-EXPORT_SYMBOL(omap_set_gpio_direction);
-EXPORT_SYMBOL(omap_set_gpio_dataout);
-EXPORT_SYMBOL(omap_get_gpio_datain);
-
 arch_initcall(omap_gpio_sysinit);
 
 
@@ -1800,14 +1774,14 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 				continue;
 
 			irq = bank->virtual_irq_start + j;
-			value = omap_get_gpio_datain(gpio);
+			value = gpio_get_value(gpio);
 			is_in = gpio_is_input(bank, mask);
 
 			if (bank_is_mpuio(bank))
 				seq_printf(s, "MPUIO %2d ", j);
 			else
 				seq_printf(s, "GPIO %3d ", gpio);
-			seq_printf(s, "(%10s): %s %s",
+			seq_printf(s, "(%-20.20s): %s %s",
 					label,
 					is_in ? "in " : "out",
 					value ? "hi"  : "lo");
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 0e6d147ab6f8..89a6ab0b7db8 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -79,26 +79,43 @@ static struct platform_device omap_i2c_devices[] = {
 #endif
 };
 
-static void __init omap_i2c_mux_pins(int bus_id)
+#if defined(CONFIG_ARCH_OMAP24XX)
+static const int omap24xx_pins[][2] = {
+	{ M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
+	{ J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
+};
+#else
+static const int omap24xx_pins[][2] = {};
+#endif
+#if defined(CONFIG_ARCH_OMAP34XX)
+static const int omap34xx_pins[][2] = {
+	{ K21_34XX_I2C1_SCL, J21_34XX_I2C1_SDA},
+	{ AF15_34XX_I2C2_SCL, AE15_34XX_I2C2_SDA},
+	{ AF14_34XX_I2C3_SCL, AG14_34XX_I2C3_SDA},
+};
+#else
+static const int omap34xx_pins[][2] = {};
+#endif
+
+static void __init omap_i2c_mux_pins(int bus)
 {
-	/* TODO: Muxing for OMAP3 */
-	switch (bus_id) {
-	case 1:
-		if (cpu_class_is_omap1()) {
-			omap_cfg_reg(I2C_SCL);
-			omap_cfg_reg(I2C_SDA);
-		} else if (cpu_is_omap24xx()) {
-			omap_cfg_reg(M19_24XX_I2C1_SCL);
-			omap_cfg_reg(L15_24XX_I2C1_SDA);
-		}
-		break;
-	case 2:
-		if (cpu_is_omap24xx()) {
-			omap_cfg_reg(J15_24XX_I2C2_SCL);
-			omap_cfg_reg(H19_24XX_I2C2_SDA);
-		}
-		break;
+	int scl, sda;
+
+	if (cpu_class_is_omap1()) {
+		scl = I2C_SCL;
+		sda = I2C_SDA;
+	} else if (cpu_is_omap24xx()) {
+		scl = omap24xx_pins[bus][0];
+		sda = omap24xx_pins[bus][1];
+	} else if (cpu_is_omap34xx()) {
+		scl = omap34xx_pins[bus][0];
+		sda = omap34xx_pins[bus][1];
+	} else {
+		return;
 	}
+
+	omap_cfg_reg(sda);
+	omap_cfg_reg(scl);
 }
 
 int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
@@ -142,6 +159,6 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 		res[1].start = irq;
 	}
 
-	omap_i2c_mux_pins(bus_id);
+	omap_i2c_mux_pins(bus_id - 1);
 	return platform_device_register(pdev);
 }
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
index 731c858cf3fe..61bd5e8f09b1 100644
--- a/arch/arm/plat-omap/include/mach/board-apollon.h
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -29,12 +29,14 @@
 #ifndef __ASM_ARCH_OMAP_APOLLON_H
 #define __ASM_ARCH_OMAP_APOLLON_H
 
+#include <mach/cpu.h>
+
 extern void apollon_mmc_init(void);
 
 static inline int apollon_plus(void)
 {
 	/* The apollon plus has IDCODE revision 5 */
-	return system_rev & 0xc0;
+	return omap_rev() & 0xc0;
 }
 
 /* Placeholder for APOLLON specific defines */
diff --git a/arch/arm/plat-omap/include/mach/board-h2.h b/arch/arm/plat-omap/include/mach/board-h2.h
index 2a050e9be65f..15531c8dc0e6 100644
--- a/arch/arm/plat-omap/include/mach/board-h2.h
+++ b/arch/arm/plat-omap/include/mach/board-h2.h
@@ -29,13 +29,13 @@
 #ifndef __ASM_ARCH_OMAP_H2_H
 #define __ASM_ARCH_OMAP_H2_H
 
-/* Placeholder for H2 specific defines */
-
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define OMAP1610_ETHR_START		0x04000300
 
+#define H2_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define H2_TPS_GPIO_MMC_PWR_EN	(H2_TPS_GPIO_BASE + 3)
+
 extern void h2_mmc_init(void);
-extern void h2_mmc_slot_cover_handler(void *arg, int state);
 
 #endif /*  __ASM_ARCH_OMAP_H2_H */
 
diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h
index 66e2746c04ca..f23399665212 100644
--- a/arch/arm/plat-omap/include/mach/board-ldp.h
+++ b/arch/arm/plat-omap/include/mach/board-ldp.h
@@ -32,5 +32,8 @@
 extern void twl4030_bci_battery_init(void);
 
 #define TWL4030_IRQNUM		INT_34XX_SYS_NIRQ
-
+#define LDP_SMC911X_CS         1
+#define LDP_SMC911X_GPIO       152
+#define DEBUG_BASE             0x08000000
+#define OMAP34XX_ETHR_START    DEBUG_BASE
 #endif /* __ASM_ARCH_OMAP_LDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index c23c12ccb353..9466772fc7c8 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -16,7 +16,6 @@
 
 /* Different peripheral ids */
 #define OMAP_TAG_CLOCK		0x4f01
-#define OMAP_TAG_MMC		0x4f02
 #define OMAP_TAG_SERIAL_CONSOLE 0x4f03
 #define OMAP_TAG_USB		0x4f04
 #define OMAP_TAG_LCD		0x4f05
@@ -35,27 +34,6 @@ struct omap_clock_config {
 	u8 system_clock_type;
 };
 
-struct omap_mmc_conf {
-	unsigned enabled:1;
-	/* nomux means "standard" muxing is wrong on this board, and that
-	 * board-specific code handled it before common init logic.
-	 */
-	unsigned nomux:1;
-	/* switch pin can be for card detect (default) or card cover */
-	unsigned cover:1;
-	/* 4 wire signaling is optional, and is only used for SD/SDIO */
-	unsigned wire4:1;
-	/* use the internal clock */
-	unsigned internal_clock:1;
-	s16 power_pin;
-	s16 switch_pin;
-	s16 wp_pin;
-};
-
-struct omap_mmc_config {
-	struct omap_mmc_conf mmc[2];
-};
-
 struct omap_serial_console_config {
 	u8 console_uart;
 	u32 console_speed;
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index dc9886760577..269147f3836f 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -74,6 +74,7 @@
 #define OMAP243X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP243X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
 #define OMAP243X_CONTROL_IVA2_GEMCFG	(OMAP2_CONTROL_GENERAL + 0x0198)
+#define OMAP243X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x0230)
 
 /* 24xx-only CONTROL_GENERAL register offsets */
 #define OMAP24XX_CONTROL_DEBOBS		(OMAP2_CONTROL_GENERAL + 0x0000)
@@ -140,6 +141,7 @@
 #define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
 #define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02b0)
 #define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
 
 /*
@@ -154,11 +156,14 @@
  * and the security mode (secure, non-secure, don't care)
  */
 /* CONTROL_DEVCONF0 bits */
+#define OMAP2_MMCSDIO1ADPCLKISEL	(1 << 24) /* MMC1 loop back clock */
 #define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
 #define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
 #define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
 
 /* CONTROL_DEVCONF1 bits */
+#define OMAP243X_MMC1_ACTIVE_OVERWRITE	(1 << 31)
+#define OMAP2_MMCSDIO2ADPCLKISEL	(1 << 6) /* MMC2 loop back clock */
 #define OMAP2_MCBSP5_CLKS_MASK		(1 << 4) /* > 242x */
 #define OMAP2_MCBSP4_CLKS_MASK		(1 << 2) /* > 242x */
 #define OMAP2_MCBSP3_CLKS_MASK		(1 << 0) /* > 242x */
@@ -172,6 +177,18 @@
 #define OMAP2_SYSBOOT_1_MASK		(1 << 1)
 #define OMAP2_SYSBOOT_0_MASK		(1 << 0)
 
+/* CONTROL_PBIAS_LITE bits */
+#define OMAP343X_PBIASLITESUPPLY_HIGH1	(1 << 15)
+#define OMAP343X_PBIASLITEVMODEERROR1	(1 << 11)
+#define OMAP343X_PBIASSPEEDCTRL1	(1 << 10)
+#define OMAP343X_PBIASLITEPWRDNZ1	(1 << 9)
+#define OMAP343X_PBIASLITEVMODE1	(1 << 8)
+#define OMAP343X_PBIASLITESUPPLY_HIGH0	(1 << 7)
+#define OMAP343X_PBIASLITEVMODEERROR0	(1 << 3)
+#define OMAP2_PBIASSPEEDCTRL0		(1 << 2)
+#define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
+#define OMAP2_PBIASLITEVMODE0		(1 << 0)
+
 #ifndef __ASSEMBLY__
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 extern void __iomem *omap_ctrl_base_get(void);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index e0464187209d..b2062f1175de 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -28,13 +28,18 @@
 
 struct omap_chip_id {
 	u8 oc;
+	u8 type;
 };
 
 #define OMAP_CHIP_INIT(x)	{ .oc = x }
 
-extern unsigned int system_rev;
-
-#define omap2_cpu_rev()		((system_rev >> 12) & 0x0f)
+/*
+ * omap_rev bits:
+ * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
+ * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
+ */
+unsigned int omap_rev(void);
 
 /*
  * Test if multicore OMAP support is needed
@@ -108,7 +113,7 @@ extern unsigned int system_rev;
  * cpu_is_omap243x():	True for OMAP2430
  * cpu_is_omap343x():	True for OMAP3430
  */
-#define GET_OMAP_CLASS	((system_rev >> 24) & 0xff)
+#define GET_OMAP_CLASS	(omap_rev() & 0xff)
 
 #define IS_OMAP_CLASS(class, id)			\
 static inline int is_omap ##class (void)		\
@@ -116,7 +121,7 @@ static inline int is_omap ##class (void)		\
 	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
 }
 
-#define GET_OMAP_SUBCLASS	((system_rev >> 20) & 0x0fff)
+#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
 
 #define IS_OMAP_SUBCLASS(subclass, id)			\
 static inline int is_omap ##subclass (void)		\
@@ -226,7 +231,7 @@ IS_OMAP_SUBCLASS(343x, 0x343)
  * cpu_is_omap2430():	True for OMAP2430
  * cpu_is_omap3430():	True for OMAP3430
  */
-#define GET_OMAP_TYPE	((system_rev >> 16) & 0xffff)
+#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
 
 #define IS_OMAP_TYPE(type, id)				\
 static inline int is_omap ##type (void)			\
@@ -320,44 +325,20 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-/*
- * Macros to detect silicon revision of OMAP2/3 processors.
- * is_sil_rev_greater_than:	true if passed cpu type & its rev is greater.
- * is_sil_rev_lesser_than:	true if passed cpu type & its rev is lesser.
- * is_sil_rev_equal_to:		true if passed cpu type & its rev is equal.
- * get_sil_rev:			return the silicon rev value.
- */
-#define get_sil_omap_type(rev)	((rev & 0xffff0000) >> 16)
-#define get_sil_revision(rev)	((rev & 0x0000f000) >> 12)
 
-#define is_sil_rev_greater_than(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) > get_sil_revision(rev)))
+/* Various silicon revisions for omap2 */
+#define OMAP242X_CLASS		0x24200024
+#define OMAP2420_REV_ES1_0	0x24200024
+#define OMAP2420_REV_ES2_0	0x24201024
 
-#define is_sil_rev_less_than(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) < get_sil_revision(rev)))
+#define OMAP243X_CLASS		0x24300024
+#define OMAP2430_REV_ES1_0	0x24300024
 
-#define is_sil_rev_equal_to(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) == get_sil_revision(rev)))
-
-#define get_sil_rev() \
-		get_sil_revision(system_rev)
-
-/* Various silicon macros defined here */
-#define OMAP242X_CLASS		0x24200000
-#define OMAP2420_REV_ES1_0	0x24200000
-#define OMAP2420_REV_ES2_0	0x24201000
-
-#define OMAP243X_CLASS		0x24300000
-#define OMAP2430_REV_ES1_0	0x24300000
-
-#define OMAP343X_CLASS		0x34300000
-#define OMAP3430_REV_ES1_0	0x34300000
-#define OMAP3430_REV_ES2_0	0x34301000
-#define OMAP3430_REV_ES2_1	0x34302000
-#define OMAP3430_REV_ES2_2	0x34303000
+#define OMAP343X_CLASS		0x34300034
+#define OMAP3430_REV_ES1_0	0x34300034
+#define OMAP3430_REV_ES2_0	0x34301034
+#define OMAP3430_REV_ES2_1	0x34302034
+#define OMAP3430_REV_ES3_0	0x34303034
 
 /*
  * omap_chip bits
@@ -382,23 +363,16 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define CHIP_IS_OMAP24XX       (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
 int omap_chip_is(struct omap_chip_id oci);
-
+int omap_type(void);
 
 /*
  * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
  */
-#define DEVICE_TYPE_TEST	0
-#define DEVICE_TYPE_EMU		1
-#define DEVICE_TYPE_SEC		2
-#define DEVICE_TYPE_GP		3
-#define DEVICE_TYPE_BAD		4
-
-#define get_device_type()	((system_rev & 0x700) >> 8)
-#define is_device_type_test()	(get_device_type() == DEVICE_TYPE_TEST)
-#define is_device_type_emu()	(get_device_type() == DEVICE_TYPE_EMU)
-#define is_device_type_sec()	(get_device_type() == DEVICE_TYPE_SEC)
-#define is_device_type_gp()	(get_device_type() == DEVICE_TYPE_GP)
-#define is_device_type_bad()	(get_device_type() == DEVICE_TYPE_BAD)
+#define OMAP2_DEVICE_TYPE_TEST		0
+#define OMAP2_DEVICE_TYPE_EMU		1
+#define OMAP2_DEVICE_TYPE_SEC		2
+#define OMAP2_DEVICE_TYPE_GP		3
+#define OMAP2_DEVICE_TYPE_BAD		4
 
 void omap2_check_revision(void);
 
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 98e9008b7e9d..04e68e88f134 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -71,11 +71,6 @@
 				 IH_GPIO_BASE + (nr))
 
 extern int omap_gpio_init(void);	/* Call from board init only */
-extern int omap_request_gpio(int gpio);
-extern void omap_free_gpio(int gpio);
-extern void omap_set_gpio_direction(int gpio, int is_input);
-extern void omap_set_gpio_dataout(int gpio, int enable);
-extern int omap_get_gpio_datain(int gpio);
 extern void omap2_gpio_prepare_for_retention(void);
 extern void omap2_gpio_resume_after_retention(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
@@ -92,6 +87,16 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable);
 #include <linux/errno.h>
 #include <asm-generic/gpio.h>
 
+static inline int omap_request_gpio(int gpio)
+{
+	return gpio_request(gpio, "FIXME");
+}
+
+static inline void omap_free_gpio(int gpio)
+{
+	gpio_free(gpio);
+}
+
 static inline int gpio_get_value(unsigned gpio)
 {
 	return __gpio_get_value(gpio);
@@ -109,16 +114,24 @@ static inline int gpio_cansleep(unsigned gpio)
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	if (gpio < (OMAP_MAX_GPIO_LINES + 16))
-		return OMAP_GPIO_IRQ(gpio);
-	return -EINVAL;
+	return __gpio_to_irq(gpio);
 }
 
 static inline int irq_to_gpio(unsigned irq)
 {
+	int tmp;
+
+	/* omap1 SOC mpuio */
 	if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
 		return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
-	return irq - IH_GPIO_BASE;
+
+	/* SOC gpio */
+	tmp = irq - IH_GPIO_BASE;
+	if (tmp < OMAP_MAX_GPIO_LINES)
+		return tmp;
+
+	/* we don't supply reverse mappings for non-SOC gpios */
+	return -EIO;
 }
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index adc83b7b8205..d92bf7964481 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -42,8 +42,8 @@
  * We don't actually have real ISA nor PCI buses, but there is so many
  * drivers out there that might just work if we fake them...
  */
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 /*
  * ----------------------------------------------------------------------------
@@ -51,8 +51,6 @@
  * ----------------------------------------------------------------------------
  */
 
-#define PCIO_BASE	0
-
 #if defined(CONFIG_ARCH_OMAP1)
 
 #define IO_PHYS			0xFFFB0000
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index d40cac60b959..211c9f6619e9 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -43,18 +43,7 @@
 #endif
 
 /*
- * Conversion between SDRAM and fake PCI bus, used by USB
- * NOTE: Physical address must be converted to Local Bus address
- *	 on OMAP-1510 only
- */
-
-/*
  * Bus address is physical address, except for OMAP-1510 Local Bus.
- */
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-/*
  * OMAP-1510 bus address is translated into a Local Bus address if the
  * OMAP bus type is lbus. We do the address translation based on the
  * device overriding the defaults used in the dma-mapping API.
@@ -74,16 +63,16 @@
 
 #define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
 					(dma_addr_t)virt_to_lbus(page_address(page)) : \
-					(dma_addr_t)__virt_to_bus(page_address(page));})
+					(dma_addr_t)__virt_to_phys(page_address(page));})
 
 #define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
 						lbus_to_virt(addr) : \
-						__bus_to_virt(addr)); })
+						__phys_to_virt(addr)); })
 
 #define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
 					   (dma_addr_t) (is_lbus_device(dev) ? \
 						virt_to_lbus(__addr) : \
-						__virt_to_bus(__addr)); })
+						__virt_to_phys(__addr)); })
 
 #endif	/* CONFIG_ARCH_OMAP15XX */
 
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index fc15d13058fc..031250f02805 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -17,12 +17,28 @@
 
 #include <mach/board.h>
 
+#define OMAP15XX_NR_MMC		1
+#define OMAP16XX_NR_MMC		2
+#define OMAP1_MMC_SIZE		0x080
+#define OMAP1_MMC1_BASE		0xfffb7800
+#define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+
+#define OMAP24XX_NR_MMC		2
+#define OMAP34XX_NR_MMC		3
+#define OMAP2420_MMC_SIZE	OMAP1_MMC_SIZE
+#define HSMMC_SIZE		0x200
+#define OMAP2_MMC1_BASE		0x4809c000
+#define OMAP2_MMC2_BASE		0x480b4000
+#define OMAP3_MMC3_BASE		0x480ad000
+#define HSMMC3			(1 << 2)
+#define HSMMC2			(1 << 1)
+#define HSMMC1			(1 << 0)
+
 #define OMAP_MMC_MAX_SLOTS	2
 
 struct omap_mmc_platform_data {
-	struct omap_mmc_conf	conf;
 
-	/* number of slots on board */
+	/* number of slots per controller */
 	unsigned nr_slots:2;
 
 	/* set if your board has components or wiring that limits the
@@ -41,7 +57,31 @@ struct omap_mmc_platform_data {
 	int (*suspend)(struct device *dev, int slot);
 	int (*resume)(struct device *dev, int slot);
 
+	u64 dma_mask;
+
 	struct omap_mmc_slot_data {
+
+		/* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC;
+		 * 8 wire signaling is also optional, and is used with HSMMC
+		 */
+		u8 wires;
+
+		/*
+		 * nomux means "standard" muxing is wrong on this board, and
+		 * that board-specific code handled it before common init logic.
+		 */
+		unsigned nomux:1;
+
+		/* switch pin can be for card detect (default) or card cover */
+		unsigned cover:1;
+
+		/* use the internal clock */
+		unsigned internal_clock:1;
+		s16 power_pin;
+
+		int switch_pin;			/* gpio (card detect) */
+		int gpio_wp;			/* gpio (write protect) */
+
 		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
 		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
 		int (* get_ro)(struct device *dev, int slot);
@@ -49,8 +89,8 @@ struct omap_mmc_platform_data {
 		/* return MMC cover switch state, can be NULL if not supported.
 		 *
 		 * possible return values:
-		 *   0 - open
-		 *   1 - closed
+		 *   0 - closed
+		 *   1 - open
 		 */
 		int (* get_cover_state)(struct device *dev, int slot);
 
@@ -66,9 +106,31 @@ struct omap_mmc_platform_data {
 	} slots[OMAP_MMC_MAX_SLOTS];
 };
 
-extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
-
 /* called from board-specific card detection service routine */
 extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
 
+#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers);
+void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers);
+int omap_mmc_add(int id, unsigned long base, unsigned long size,
+			unsigned int irq, struct omap_mmc_platform_data *data);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers)
+{
+}
+static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers)
+{
+}
+static inline int omap_mmc_add(int id, unsigned long base, unsigned long size,
+		unsigned int irq, struct omap_mmc_platform_data *data)
+{
+	return 0;
+}
+
+#endif
 #endif
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 6bbf1789bed5..f4362b8682c7 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -632,6 +632,15 @@ enum omap24xx_index {
 	AC7_2430_USB0HS_DATA7,
 
 	/* 2430 McBSP */
+	AD6_2430_MCBSP_CLKS,
+
+	AB2_2430_MCBSP1_CLKR,
+	AD5_2430_MCBSP1_FSR,
+	AA1_2430_MCBSP1_DX,
+	AF3_2430_MCBSP1_DR,
+	AB3_2430_MCBSP1_FSX,
+	Y9_2430_MCBSP1_CLKX,
+
 	AC10_2430_MCBSP2_FSX,
 	AD16_2430_MCBSP2_CLX,
 	AE13_2430_MCBSP2_DX,
@@ -641,6 +650,30 @@ enum omap24xx_index {
 	AE13_2430_MCBSP2_DX_OFF,
 	AD13_2430_MCBSP2_DR_OFF,
 
+	AC9_2430_MCBSP3_CLKX,
+	AE4_2430_MCBSP3_FSX,
+	AE2_2430_MCBSP3_DR,
+	AF4_2430_MCBSP3_DX,
+
+	N3_2430_MCBSP4_CLKX,
+	AD23_2430_MCBSP4_DR,
+	AB25_2430_MCBSP4_DX,
+	AC25_2430_MCBSP4_FSX,
+
+	AE16_2430_MCBSP5_CLKX,
+	AF12_2430_MCBSP5_FSX,
+	K7_2430_MCBSP5_DX,
+	M1_2430_MCBSP5_DR,
+
+	/* 2430 McSPI*/
+	Y18_2430_MCSPI1_CLK,
+	AD15_2430_MCSPI1_SIMO,
+	AE17_2430_MCSPI1_SOMI,
+	U1_2430_MCSPI1_CS0,
+
+	/* Touchscreen GPIO */
+	AF19_2430_GPIO_85,
+
 };
 
 enum omap34xx_index {
@@ -749,6 +782,14 @@ enum omap34xx_index {
 	AD2_3430_USB3FS_PHY_MM3_TXDAT,
 	AC1_3430_USB3FS_PHY_MM3_TXEN_N,
 
+	/* 34xx GPIO
+	 *  - normally these are bidirectional, no internal pullup/pulldown
+	 *  - "_UP" suffix (GPIO3_UP) if internal pullup is configured
+	 *  - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
+	 *  - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
+	 */
+	AH8_34XX_GPIO29,
+	J25_34XX_GPIO170,
 };
 
 struct omap_mux_cfg {
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index ec67fb428607..7b74d1255e0b 100644
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -353,8 +353,8 @@ struct omapfb_device {
 	u32			pseudo_palette[17];
 
 	struct lcd_panel	*panel;			/* LCD panel */
-	struct lcd_ctrl         *ctrl;			/* LCD controller */
-	struct lcd_ctrl		*int_ctrl;		/* internal LCD ctrl */
+	const struct lcd_ctrl	*ctrl;			/* LCD controller */
+	const struct lcd_ctrl	*int_ctrl;		/* internal LCD ctrl */
 	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
 							   interface */
 	struct device		*dev;
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
index 768eb6e7abcf..2a9c27ad4c37 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -128,7 +128,7 @@ void clk_deny_idle(struct clk *clk);
  * clk_allow_idle - Counters previous clk_deny_idle
  * @clk: clock signal handle
  */
-void clk_deny_idle(struct clk *clk);
+void clk_allow_idle(struct clk *clk);
 
 extern void omap_pm_idle(void);
 extern void omap_pm_suspend(void);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 9f9a921829c0..be7bcaf2b832 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -24,6 +24,7 @@
 
 #include <mach/sram.h>
 #include <mach/board.h>
+#include <mach/cpu.h>
 
 #include <mach/control.h>
 
@@ -87,7 +88,7 @@ static int is_sram_locked(void)
 	int type = 0;
 
 	if (cpu_is_omap242x())
-		type = system_rev & OMAP2_DEVICETYPE_MASK;
+		type = omap_rev() & OMAP2_DEVICETYPE_MASK;
 
 	if (type == GP_DEVICE) {
 		/* RAMFW: R/W access to all initiators for all qualifier sets */
@@ -255,7 +256,7 @@ void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
 	if (!_omap_sram_reprogram_clock)
 		omap_sram_error();
 
-	return _omap_sram_reprogram_clock(dpllctl, ckctl);
+	_omap_sram_reprogram_clock(dpllctl, ckctl);
 }
 
 int __init omap1_sram_init(void)
@@ -282,8 +283,8 @@ void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 	if (!_omap2_sram_ddr_init)
 		omap_sram_error();
 
-	return _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
-				    base_cs, force_unlock);
+	_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
+			     base_cs, force_unlock);
 }
 
 static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
@@ -294,7 +295,7 @@ void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
 	if (!_omap2_sram_reprogram_sdrc)
 		omap_sram_error();
 
-	return _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
+	_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
 }
 
 static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index 198f3dde2be3..56021a72e10c 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -6,3 +6,5 @@ obj-y	:= irq.o pcie.o time.o
 obj-m	:=
 obj-n	:=
 obj-	:=
+
+obj-$(CONFIG_GENERIC_GPIO) += gpio.o
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
new file mode 100644
index 000000000000..967186425ca1
--- /dev/null
+++ b/arch/arm/plat-orion/gpio.c
@@ -0,0 +1,415 @@
+/*
+ * arch/arm/plat-orion/gpio.c
+ *
+ * Marvell Orion SoC GPIO handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <asm/gpio.h>
+
+static DEFINE_SPINLOCK(gpio_lock);
+static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
+static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
+
+static inline void __set_direction(unsigned pin, int input)
+{
+	u32 u;
+
+	u = readl(GPIO_IO_CONF(pin));
+	if (input)
+		u |= 1 << (pin & 31);
+	else
+		u &= ~(1 << (pin & 31));
+	writel(u, GPIO_IO_CONF(pin));
+}
+
+static void __set_level(unsigned pin, int high)
+{
+	u32 u;
+
+	u = readl(GPIO_OUT(pin));
+	if (high)
+		u |= 1 << (pin & 31);
+	else
+		u &= ~(1 << (pin & 31));
+	writel(u, GPIO_OUT(pin));
+}
+
+
+/*
+ * GENERIC_GPIO primitives.
+ */
+int gpio_direction_input(unsigned pin)
+{
+	unsigned long flags;
+
+	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	/*
+	 * Some callers might not have used gpio_request(),
+	 * so flag this pin as requested now.
+	 */
+	if (gpio_label[pin] == NULL)
+		gpio_label[pin] = "?";
+
+	/*
+	 * Configure GPIO direction.
+	 */
+	__set_direction(pin, 1);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned pin, int value)
+{
+	unsigned long flags;
+	u32 u;
+
+	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	/*
+	 * Some callers might not have used gpio_request(),
+	 * so flag this pin as requested now.
+	 */
+	if (gpio_label[pin] == NULL)
+		gpio_label[pin] = "?";
+
+	/*
+	 * Disable blinking.
+	 */
+	u = readl(GPIO_BLINK_EN(pin));
+	u &= ~(1 << (pin & 31));
+	writel(u, GPIO_BLINK_EN(pin));
+
+	/*
+	 * Configure GPIO output value.
+	 */
+	__set_level(pin, value);
+
+	/*
+	 * Configure GPIO direction.
+	 */
+	__set_direction(pin, 0);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+int gpio_get_value(unsigned pin)
+{
+	int val;
+
+	if (readl(GPIO_IO_CONF(pin)) & (1 << (pin & 31)))
+		val = readl(GPIO_DATA_IN(pin)) ^ readl(GPIO_IN_POL(pin));
+	else
+		val = readl(GPIO_OUT(pin));
+
+	return (val >> (pin & 31)) & 1;
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+void gpio_set_value(unsigned pin, int value)
+{
+	unsigned long flags;
+	u32 u;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	/*
+	 * Disable blinking.
+	 */
+	u = readl(GPIO_BLINK_EN(pin));
+	u &= ~(1 << (pin & 31));
+	writel(u, GPIO_BLINK_EN(pin));
+
+	/*
+	 * Configure GPIO output value.
+	 */
+	__set_level(pin, value);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+int gpio_request(unsigned pin, const char *label)
+{
+	unsigned long flags;
+	int ret;
+
+	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	if (gpio_label[pin] == NULL) {
+		gpio_label[pin] = label ? label : "?";
+		ret = 0;
+	} else {
+		pr_debug("%s: GPIO %d already used as %s\n",
+			 __func__, pin, gpio_label[pin]);
+		ret = -EBUSY;
+	}
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned pin)
+{
+	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+		return;
+	}
+
+	if (gpio_label[pin] == NULL)
+		pr_warning("%s: GPIO %d already freed\n", __func__, pin);
+	else
+		gpio_label[pin] = NULL;
+}
+EXPORT_SYMBOL(gpio_free);
+
+
+/*
+ * Orion-specific GPIO API extensions.
+ */
+void __init orion_gpio_set_unused(unsigned pin)
+{
+	/*
+	 * Configure as output, drive low.
+	 */
+	__set_level(pin, 0);
+	__set_direction(pin, 0);
+}
+
+void __init orion_gpio_set_valid(unsigned pin, int valid)
+{
+	if (valid)
+		__set_bit(pin, gpio_valid);
+	else
+		__clear_bit(pin, gpio_valid);
+}
+
+void orion_gpio_set_blink(unsigned pin, int blink)
+{
+	unsigned long flags;
+	u32 u;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	/*
+	 * Set output value to zero.
+	 */
+	__set_level(pin, 0);
+
+	u = readl(GPIO_BLINK_EN(pin));
+	if (blink)
+		u |= 1 << (pin & 31);
+	else
+		u &= ~(1 << (pin & 31));
+	writel(u, GPIO_BLINK_EN(pin));
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(orion_gpio_set_blink);
+
+
+/*****************************************************************************
+ * Orion GPIO IRQ
+ *
+ * GPIO_IN_POL register controls whether GPIO_DATA_IN will hold the same
+ * value of the line or the opposite value.
+ *
+ * Level IRQ handlers: DATA_IN is used directly as cause register.
+ *                     Interrupt are masked by LEVEL_MASK registers.
+ * Edge IRQ handlers:  Change in DATA_IN are latched in EDGE_CAUSE.
+ *                     Interrupt are masked by EDGE_MASK registers.
+ * Both-edge handlers: Similar to regular Edge handlers, but also swaps
+ *                     the polarity to catch the next line transaction.
+ *                     This is a race condition that might not perfectly
+ *                     work on some use cases.
+ *
+ * Every eight GPIO lines are grouped (OR'ed) before going up to main
+ * cause register.
+ *
+ *                    EDGE  cause    mask
+ *        data-in   /--------| |-----| |----\
+ *     -----| |-----                         ---- to main cause reg
+ *           X      \----------------| |----/
+ *        polarity    LEVEL          mask
+ *
+ ****************************************************************************/
+static void gpio_irq_edge_ack(u32 irq)
+{
+	int pin = irq_to_gpio(irq);
+
+	writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
+}
+
+static void gpio_irq_edge_mask(u32 irq)
+{
+	int pin = irq_to_gpio(irq);
+	u32 u;
+
+	u = readl(GPIO_EDGE_MASK(pin));
+	u &= ~(1 << (pin & 31));
+	writel(u, GPIO_EDGE_MASK(pin));
+}
+
+static void gpio_irq_edge_unmask(u32 irq)
+{
+	int pin = irq_to_gpio(irq);
+	u32 u;
+
+	u = readl(GPIO_EDGE_MASK(pin));
+	u |= 1 << (pin & 31);
+	writel(u, GPIO_EDGE_MASK(pin));
+}
+
+static void gpio_irq_level_mask(u32 irq)
+{
+	int pin = irq_to_gpio(irq);
+	u32 u;
+
+	u = readl(GPIO_LEVEL_MASK(pin));
+	u &= ~(1 << (pin & 31));
+	writel(u, GPIO_LEVEL_MASK(pin));
+}
+
+static void gpio_irq_level_unmask(u32 irq)
+{
+	int pin = irq_to_gpio(irq);
+	u32 u;
+
+	u = readl(GPIO_LEVEL_MASK(pin));
+	u |= 1 << (pin & 31);
+	writel(u, GPIO_LEVEL_MASK(pin));
+}
+
+static int gpio_irq_set_type(u32 irq, u32 type)
+{
+	int pin = irq_to_gpio(irq);
+	struct irq_desc *desc;
+	u32 u;
+
+	u = readl(GPIO_IO_CONF(pin)) & (1 << (pin & 31));
+	if (!u) {
+		printk(KERN_ERR "orion gpio_irq_set_type failed "
+				"(irq %d, pin %d).\n", irq, pin);
+		return -EINVAL;
+	}
+
+	desc = irq_desc + irq;
+
+	/*
+	 * Set edge/level type.
+	 */
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+		desc->chip = &orion_gpio_irq_edge_chip;
+	} else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+		desc->chip = &orion_gpio_irq_level_chip;
+	} else {
+		printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
+		return -EINVAL;
+	}
+
+	/*
+	 * Configure interrupt polarity.
+	 */
+	if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH) {
+		u = readl(GPIO_IN_POL(pin));
+		u &= ~(1 << (pin & 31));
+		writel(u, GPIO_IN_POL(pin));
+	} else if (type == IRQ_TYPE_EDGE_FALLING || type == IRQ_TYPE_LEVEL_LOW) {
+		u = readl(GPIO_IN_POL(pin));
+		u |= 1 << (pin & 31);
+		writel(u, GPIO_IN_POL(pin));
+	} else if (type == IRQ_TYPE_EDGE_BOTH) {
+		u32 v;
+
+		v = readl(GPIO_IN_POL(pin)) ^ readl(GPIO_DATA_IN(pin));
+
+		/*
+		 * set initial polarity based on current input level
+		 */
+		u = readl(GPIO_IN_POL(pin));
+		if (v & (1 << (pin & 31)))
+			u |= 1 << (pin & 31);		/* falling */
+		else
+			u &= ~(1 << (pin & 31));	/* rising */
+		writel(u, GPIO_IN_POL(pin));
+	}
+
+	desc->status = (desc->status & ~IRQ_TYPE_SENSE_MASK) | type;
+
+	return 0;
+}
+
+struct irq_chip orion_gpio_irq_edge_chip = {
+	.name		= "orion_gpio_irq_edge",
+	.ack		= gpio_irq_edge_ack,
+	.mask		= gpio_irq_edge_mask,
+	.unmask		= gpio_irq_edge_unmask,
+	.set_type	= gpio_irq_set_type,
+};
+
+struct irq_chip orion_gpio_irq_level_chip = {
+	.name		= "orion_gpio_irq_level",
+	.mask		= gpio_irq_level_mask,
+	.mask_ack	= gpio_irq_level_mask,
+	.unmask		= gpio_irq_level_unmask,
+	.set_type	= gpio_irq_set_type,
+};
+
+void orion_gpio_irq_handler(int pinoff)
+{
+	u32 cause;
+	int pin;
+
+	cause = readl(GPIO_DATA_IN(pinoff)) & readl(GPIO_LEVEL_MASK(pinoff));
+	cause |= readl(GPIO_EDGE_CAUSE(pinoff)) & readl(GPIO_EDGE_MASK(pinoff));
+
+	for (pin = pinoff; pin < pinoff + 8; pin++) {
+		int irq = gpio_to_irq(pin);
+		struct irq_desc *desc = irq_desc + irq;
+
+		if (!(cause & (1 << (pin & 31))))
+			continue;
+
+		if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
+			/* Swap polarity (race with GPIO line) */
+			u32 polarity;
+
+			polarity = readl(GPIO_IN_POL(pin));
+			polarity ^= 1 << (pin & 31);
+			writel(polarity, GPIO_IN_POL(pin));
+		}
+		desc_handle_irq(irq, desc);
+	}
+}
diff --git a/arch/arm/plat-orion/include/plat/ehci-orion.h b/arch/arm/plat-orion/include/plat/ehci-orion.h
index 64343051095a..4ec668e77460 100644
--- a/arch/arm/plat-orion/include/plat/ehci-orion.h
+++ b/arch/arm/plat-orion/include/plat/ehci-orion.h
@@ -11,8 +11,16 @@
 
 #include <linux/mbus.h>
 
+enum orion_ehci_phy_ver {
+	EHCI_PHY_ORION,
+	EHCI_PHY_DD,
+	EHCI_PHY_KW,
+	EHCI_PHY_NA,
+};
+
 struct orion_ehci_data {
 	struct mbus_dram_target_info	*dram;
+	enum orion_ehci_phy_ver phy_version;
 };
 
 
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
new file mode 100644
index 000000000000..54deaf274b52
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/plat-orion/include/plat/gpio.h
+ *
+ * Marvell Orion SoC GPIO handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_GPIO_H
+#define __PLAT_GPIO_H
+
+/*
+ * GENERIC_GPIO primitives.
+ */
+int gpio_request(unsigned pin, const char *label);
+void gpio_free(unsigned pin);
+int gpio_direction_input(unsigned pin);
+int gpio_direction_output(unsigned pin, int value);
+int gpio_get_value(unsigned pin);
+void gpio_set_value(unsigned pin, int value);
+
+/*
+ * Orion-specific GPIO API extensions.
+ */
+void orion_gpio_set_unused(unsigned pin);
+void orion_gpio_set_valid(unsigned pin, int valid);
+void orion_gpio_set_blink(unsigned pin, int blink);
+
+/*
+ * GPIO interrupt handling.
+ */
+extern struct irq_chip orion_gpio_irq_edge_chip;
+extern struct irq_chip orion_gpio_irq_level_chip;
+void orion_gpio_irq_handler(int irqoff);
+
+
+#endif
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index 883902fead89..d41d41d78ad9 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -35,7 +35,7 @@
 #define  PCIE_CONF_REG(r)		((((r) & 0xf00) << 16) | ((r) & 0xfc))
 #define  PCIE_CONF_BUS(b)		(((b) & 0xff) << 16)
 #define  PCIE_CONF_DEV(d)		(((d) & 0x1f) << 11)
-#define  PCIE_CONF_FUNC(f)		(((f) & 0x3) << 8)
+#define  PCIE_CONF_FUNC(f)		(((f) & 0x7) << 8)
 #define PCIE_CONF_DATA_OFF	0x18fc
 #define PCIE_MASK_OFF		0x1910
 #define PCIE_CTRL_OFF		0x1a00
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 31656c33e05e..de9383814e5e 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -6,34 +6,32 @@
 
 config PLAT_S3C
 	bool
-	depends on ARCH_S3C2410
-	default y if ARCH_S3C2410
+	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
+	default y
 	select NO_IOPORT
 	help
 	  Base platform code for any Samsung S3C device
 
 # low-level serial option nodes
 
+if PLAT_S3C
+
 config CPU_LLSERIAL_S3C2410_ONLY
 	bool
-	depends on ARCH_S3C2410
 	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
 
 config CPU_LLSERIAL_S3C2440_ONLY
 	bool
-	depends on ARCH_S3C2410
 	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
 
 config CPU_LLSERIAL_S3C2410
 	bool
-	depends on ARCH_S3C2410
 	help
 	  Selected if there is an S3C2410 (or register compatible) serial
 	  low-level implementation needed
 
 config CPU_LLSERIAL_S3C2440
 	bool
-	depends on ARCH_S3C2410
 	help
 	  Selected if there is an S3C2440 (or register compatible) serial
 	  low-level implementation needed
@@ -44,7 +42,7 @@ comment "Boot options"
 
 config S3C_BOOT_WATCHDOG
 	bool "S3C Initialisation watchdog"
-	depends on PLAT_S3C && S3C2410_WATCHDOG
+	depends on S3C2410_WATCHDOG
 	help
 	  Say y to enable the watchdog during the kernel decompression
 	  stage. If the kernel fails to uncompress, then the watchdog
@@ -52,16 +50,22 @@ config S3C_BOOT_WATCHDOG
 
 config S3C_BOOT_ERROR_RESET
 	bool "S3C Reboot on decompression error"
-	depends on PLAT_S3C
 	help
 	  Say y here to use the watchdog to reset the system if the
 	  kernel decompressor detects an error during decompression.
 
+config S3C_BOOT_UART_FORCE_FIFO
+       bool "Force UART FIFO on during boot process"
+       default y
+       help
+         Say Y here to force the UART FIFOs on during the kernel
+	 uncompressor
+
 comment "Power management"
 
 config S3C2410_PM_DEBUG
 	bool "S3C2410 PM Suspend debug"
-	depends on PLAT_S3C && PM
+	depends on PM
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
@@ -69,7 +73,7 @@ config S3C2410_PM_DEBUG
 
 config S3C2410_PM_CHECK
 	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PLAT_S3C && PM && CRC32
+	depends on PM && CRC32
 	help
  	  Enable the PM code's memory area checksum over sleep. This option
 	  will generate CRCs of all blocks of memory, and store them before
@@ -83,7 +87,7 @@ config S3C2410_PM_CHECK
 
 config S3C2410_PM_CHECK_CHUNKSIZE
 	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
-	depends on PLAT_S3C && PM && S3C2410_PM_CHECK
+	depends on PM && S3C2410_PM_CHECK
 	default 64
 	help
 	  Set the chunksize in Kilobytes of the CRC for checking memory
@@ -95,10 +99,77 @@ config S3C2410_PM_CHECK_CHUNKSIZE
 
 config S3C_LOWLEVEL_UART_PORT
 	int "S3C UART to use for low-level messages"
-	depends on PLAT_S3C
 	default 0
 	help
 	  Choice of which UART port to use for the low-level messages,
 	  such as the `Uncompressing...` at start time. The value of
 	  this configuration should be between zero and two. The port
 	  must have been initialised by the boot-loader before use.
+
+# options for gpiolib support
+
+config S3C_GPIO_SPACE
+	int "Space between gpio banks"
+	default 0
+	help
+	  Add a number of spare GPIO entries between each bank for debugging
+	  purposes. This allows any problems where an counter overflows from
+	  one bank to another to be caught, at the expense of using a little
+	  more memory.
+
+config S3C_GPIO_TRACK
+	bool
+	help
+	  Internal configuration option to enable the s3c specific gpio
+	  chip tracking if the platform requires it.
+
+config S3C_GPIO_PULL_UPDOWN
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_DOWN
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_UP
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_CFG_S3C24XX
+	bool
+	help
+	  Internal configuration to enable S3C24XX style GPIO configuration
+	  functions.
+
+config S3C_GPIO_CFG_S3C64XX
+	bool
+	help
+	  Internal configuration to enable S3C64XX style GPIO configuration
+	  functions.
+
+# device definitions to compile in
+
+config S3C_DEV_HSMMC
+	bool
+	help
+	  Compile in platform device definitions for HSMMC code
+
+config S3C_DEV_HSMMC1
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 1
+
+config S3C_DEV_I2C1
+	bool
+	help
+	  Compile in platform device definitions for I2C channel 1
+
+config S3C_DEV_FB
+	bool
+	help
+	  Compile in platform device definition for framebuffer
+
+endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index f03d7b35ba37..39195f972d5e 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -1,3 +1,27 @@
-# dummy makefile, currently just including asm/arm/plat-s3c/include/plat
+# arch/arm/plat-s3c/Makefile
+#
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
 
-obj-n	:= dummy.o
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for all Samsung SoCs
+
+obj-y				+=  init.o
+obj-y				+= time.o
+obj-y				+= clock.o
+obj-y				+= pwm-clock.o
+obj-y				+= gpio.o
+obj-y				+= gpio-config.o
+
+# devices
+
+obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
+obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
+obj-y				+= dev-i2c0.o
+obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
+obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
new file mode 100644
index 000000000000..b6be76e2fe51
--- /dev/null
+++ b/arch/arm/plat-s3c/clock.c
@@ -0,0 +1,368 @@
+/* linux/arch/arm/plat-s3c24xx/clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Core clock control support
+ *
+ * Based on, and code from linux/arch/arm/mach-versatile/clock.c
+ **
+ **  Copyright (C) 2004 ARM Limited.
+ **  Written by Deep Blue Solutions Limited.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+/* clock information */
+
+static LIST_HEAD(clocks);
+
+/* We originally used an mutex here, but some contexts (see resume)
+ * are calling functions such as clk_set_parent() with IRQs disabled
+ * causing an BUG to be triggered.
+ */
+DEFINE_SPINLOCK(clocks_lock);
+
+/* enable and disable calls for use with the clk struct */
+
+static int clk_null_enable(struct clk *clk, int enable)
+{
+	return 0;
+}
+
+/* Clock API calls */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p;
+	struct clk *clk = ERR_PTR(-ENOENT);
+	int idno;
+
+	if (dev == NULL || dev->bus != &platform_bus_type)
+		idno = -1;
+	else
+		idno = to_platform_device(dev)->id;
+
+	spin_lock(&clocks_lock);
+
+	list_for_each_entry(p, &clocks, list) {
+		if (p->id == idno &&
+		    strcmp(id, p->name) == 0 &&
+		    try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+
+	/* check for the case where a device was supplied, but the
+	 * clock that was being searched for is not device specific */
+
+	if (IS_ERR(clk)) {
+		list_for_each_entry(p, &clocks, list) {
+			if (p->id == -1 && strcmp(id, p->name) == 0 &&
+			    try_module_get(p->owner)) {
+				clk = p;
+				break;
+			}
+		}
+	}
+
+	spin_unlock(&clocks_lock);
+	return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+
+int clk_enable(struct clk *clk)
+{
+	if (IS_ERR(clk) || clk == NULL)
+		return -EINVAL;
+
+	clk_enable(clk->parent);
+
+	spin_lock(&clocks_lock);
+
+	if ((clk->usage++) == 0)
+		(clk->enable)(clk, 1);
+
+	spin_unlock(&clocks_lock);
+	return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+	if (IS_ERR(clk) || clk == NULL)
+		return;
+
+	spin_lock(&clocks_lock);
+
+	if ((--clk->usage) == 0)
+		(clk->enable)(clk, 0);
+
+	spin_unlock(&clocks_lock);
+	clk_disable(clk->parent);
+}
+
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (IS_ERR(clk))
+		return 0;
+
+	if (clk->rate != 0)
+		return clk->rate;
+
+	if (clk->get_rate != NULL)
+		return (clk->get_rate)(clk);
+
+	if (clk->parent != NULL)
+		return clk_get_rate(clk->parent);
+
+	return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (!IS_ERR(clk) && clk->round_rate)
+		return (clk->round_rate)(clk, rate);
+
+	return rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret;
+
+	if (IS_ERR(clk))
+		return -EINVAL;
+
+	/* We do not default just do a clk->rate = rate as
+	 * the clock may have been made this way by choice.
+	 */
+
+	WARN_ON(clk->set_rate == NULL);
+
+	if (clk->set_rate == NULL)
+		return -EINVAL;
+
+	spin_lock(&clocks_lock);
+	ret = (clk->set_rate)(clk, rate);
+	spin_unlock(&clocks_lock);
+
+	return ret;
+}
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = 0;
+
+	if (IS_ERR(clk))
+		return -EINVAL;
+
+	spin_lock(&clocks_lock);
+
+	if (clk->set_parent)
+		ret = (clk->set_parent)(clk, parent);
+
+	spin_unlock(&clocks_lock);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(clk_get);
+EXPORT_SYMBOL(clk_put);
+EXPORT_SYMBOL(clk_enable);
+EXPORT_SYMBOL(clk_disable);
+EXPORT_SYMBOL(clk_get_rate);
+EXPORT_SYMBOL(clk_round_rate);
+EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_get_parent);
+EXPORT_SYMBOL(clk_set_parent);
+
+/* base clocks */
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 0;
+}
+
+struct clk clk_xtal = {
+	.name		= "xtal",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_ext = {
+	.name		= "ext",
+	.id		= -1,
+};
+
+struct clk clk_epll = {
+	.name		= "epll",
+	.id		= -1,
+};
+
+struct clk clk_mpll = {
+	.name		= "mpll",
+	.id		= -1,
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_upll = {
+	.name		= "upll",
+	.id		= -1,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_f = {
+	.name		= "fclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= &clk_mpll,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_h = {
+	.name		= "hclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_p = {
+	.name		= "pclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_usb_bus = {
+	.name		= "usb-bus",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= &clk_upll,
+};
+
+
+
+struct clk s3c24xx_uclk = {
+	.name		= "uclk",
+	.id		= -1,
+};
+
+/* initialise the clock system */
+
+int s3c24xx_register_clock(struct clk *clk)
+{
+	clk->owner = THIS_MODULE;
+
+	if (clk->enable == NULL)
+		clk->enable = clk_null_enable;
+
+	/* add to the list of available clocks */
+
+	/* Quick check to see if this clock has already been registered. */
+	BUG_ON(clk->list.prev != clk->list.next);
+
+	spin_lock(&clocks_lock);
+	list_add(&clk->list, &clocks);
+	spin_unlock(&clocks_lock);
+
+	return 0;
+}
+
+int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
+{
+	int fails = 0;
+
+	for (; nr_clks > 0; nr_clks--, clks++) {
+		if (s3c24xx_register_clock(*clks) < 0)
+			fails++;
+	}
+
+	return fails;
+}
+
+/* initalise all the clocks */
+
+int __init s3c24xx_register_baseclocks(unsigned long xtal)
+{
+	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+
+	clk_xtal.rate = xtal;
+
+	/* register our clocks */
+
+	if (s3c24xx_register_clock(&clk_xtal) < 0)
+		printk(KERN_ERR "failed to register master xtal\n");
+
+	if (s3c24xx_register_clock(&clk_mpll) < 0)
+		printk(KERN_ERR "failed to register mpll clock\n");
+
+	if (s3c24xx_register_clock(&clk_upll) < 0)
+		printk(KERN_ERR "failed to register upll clock\n");
+
+	if (s3c24xx_register_clock(&clk_f) < 0)
+		printk(KERN_ERR "failed to register cpu fclk\n");
+
+	if (s3c24xx_register_clock(&clk_h) < 0)
+		printk(KERN_ERR "failed to register cpu hclk\n");
+
+	if (s3c24xx_register_clock(&clk_p) < 0)
+		printk(KERN_ERR "failed to register cpu pclk\n");
+
+	return 0;
+}
+
diff --git a/arch/arm/plat-s3c/dev-fb.c b/arch/arm/plat-s3c/dev-fb.c
new file mode 100644
index 000000000000..0454b8ec02e2
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-fb.c
@@ -0,0 +1,72 @@
+/* linux/arch/arm/plat-s3c/dev-fb.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for framebuffer device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <mach/map.h>
+#include <mach/regs-fb.h>
+
+#include <plat/fb.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_fb_resource[] = {
+	[0] = {
+		.start = S3C_PA_FB,
+		.end   = S3C_PA_FB + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_LCD_VSYNC,
+		.end   = IRQ_LCD_VSYNC,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_LCD_FIFO,
+		.end   = IRQ_LCD_FIFO,
+		.flags = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start = IRQ_LCD_SYSTEM,
+		.end   = IRQ_LCD_SYSTEM,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_fb = {
+	.name		  = "s3c-fb",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_fb_resource),
+	.resource	  = s3c_fb_resource,
+	.dev.dma_mask	  = &s3c_device_fb.dev.coherent_dma_mask,
+	.dev.coherent_dma_mask = 0xffffffffUL,
+};
+
+void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
+{
+	struct s3c_fb_platdata *npd;
+
+	if (!pd) {
+		printk(KERN_ERR "%s: no platform data\n", __func__);
+		return;
+	}
+
+	npd = kmemdup(pd, sizeof(struct s3c_fb_platdata), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+	s3c_device_fb.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-s3c/dev-hsmmc.c b/arch/arm/plat-s3c/dev-hsmmc.c
new file mode 100644
index 000000000000..4c05b39810e2
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-hsmmc.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-hsmmc.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for hsmmc devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define S3C_SZ_HSMMC	(0x1000)
+
+static struct resource s3c_hsmmc_resource[] = {
+	[0] = {
+		.start = S3C_PA_HSMMC0,
+		.end   = S3C_PA_HSMMC0 + S3C_SZ_HSMMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_HSMMC0,
+		.end   = IRQ_HSMMC0,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc0 = {
+	.name		= "s3c-sdhci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc_resource),
+	.resource	= s3c_hsmmc_resource,
+	.dev		= {
+		.dma_mask		= &s3c_device_hsmmc_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+		.platform_data		= &s3c_hsmmc0_def_platdata,
+	},
+};
+
+void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
+
+	set->max_width = pd->max_width;
+
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->cfg_card)
+		set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-s3c/dev-hsmmc1.c b/arch/arm/plat-s3c/dev-hsmmc1.c
new file mode 100644
index 000000000000..e49bc4cd0ee6
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-hsmmc1.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-hsmmc1.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for hsmmc device 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define S3C_SZ_HSMMC	(0x1000)
+
+static struct resource s3c_hsmmc1_resource[] = {
+	[0] = {
+		.start = S3C_PA_HSMMC1,
+		.end   = S3C_PA_HSMMC1 + S3C_SZ_HSMMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_HSMMC1,
+		.end   = IRQ_HSMMC1,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_hsmmc1_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc1 = {
+	.name		= "s3c-sdhci",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc1_resource),
+	.resource	= s3c_hsmmc1_resource,
+	.dev		= {
+		.dma_mask		= &s3c_device_hsmmc1_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+		.platform_data		= &s3c_hsmmc1_def_platdata,
+	},
+};
+
+void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
+
+	set->max_width = pd->max_width;
+
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->cfg_card)
+		set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c
new file mode 100644
index 000000000000..2c0128c77c6e
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-i2c0.c
@@ -0,0 +1,71 @@
+/* linux/arch/arm/plat-s3c/dev-i2c0.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for i2c device 0
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start = S3C_PA_IIC,
+		.end   = S3C_PA_IIC + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IIC,
+		.end   = IRQ_IIC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c0 = {
+	.name		  = "s3c2410-i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+	.id		  = 0,
+#else
+	.id		  = -1,
+#endif
+	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
+	.resource	  = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data0 __initdata = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.bus_freq	= 100*1000,
+	.max_freq	= 400*1000,
+	.sda_delay	= S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data0;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c0_cfg_gpio;
+
+	s3c_device_i2c0.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c
new file mode 100644
index 000000000000..9658fb0aec95
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-i2c1.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-i2c1.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for i2c device 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start = S3C_PA_IIC1,
+		.end   = S3C_PA_IIC1 + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IIC1,
+		.end   = IRQ_IIC1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c1 = {
+	.name		  = "s3c2410-i2c",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
+	.resource	  = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data1 __initdata = {
+	.flags		= 0,
+	.bus_num	= 1,
+	.slave_addr	= 0x10,
+	.bus_freq	= 100*1000,
+	.max_freq	= 400*1000,
+	.sda_delay	= S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data1;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c1_cfg_gpio;
+
+	s3c_device_i2c1.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c
new file mode 100644
index 000000000000..7642b975a998
--- /dev/null
+++ b/arch/arm/plat-s3c/gpio-config.c
@@ -0,0 +1,163 @@
+/* linux/arch/arm/plat-s3c/gpio-config.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO configuration core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	int ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	local_irq_save(flags);
+	ret = s3c_gpio_do_setcfg(chip, offset, config);
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset, ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	local_irq_save(flags);
+	ret = s3c_gpio_do_setpull(chip, offset, pull);
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
+int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
+				  unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off;
+	u32 con;
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+
+		/* Map output to 0, and SFN2 to 1 */
+		cfg -= 1;
+		if (cfg > 1)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x1 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
+			    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off * 2;
+	u32 con;
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		if (cfg > 3)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x3 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
+int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+				 unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio >= 8)
+		reg -= 4;
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
+
+#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
+int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
+			    unsigned int off, s3c_gpio_pull_t pull)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup;
+
+	pup = __raw_readl(reg);
+	pup &= ~(3 << shift);
+	pup |= pull << shift;
+	__raw_writel(pup, reg);
+
+	return 0;
+}
+
+s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
+					unsigned int off)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup = __raw_readl(reg);
+
+	pup >>= shift;
+	pup &= 0x3;
+	return (__force s3c_gpio_pull_t)pup;
+}
+#endif
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
new file mode 100644
index 000000000000..d71dd6d9ce5c
--- /dev/null
+++ b/arch/arm/plat-s3c/gpio.c
@@ -0,0 +1,147 @@
+/* linux/arch/arm/plat-s3c/gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-core.h>
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
+{
+	unsigned int gpn;
+	int i;
+
+	gpn = chip->chip.base;
+	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+		BUG_ON(gpn > ARRAY_SIZE(s3c_gpios));
+		s3c_gpios[gpn] = chip;
+	}
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/* Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ *	        gpio n: 2 bits starting at (2*n)
+ *		00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+*/
+
+static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long con;
+
+	local_irq_save(flags);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+
+	__raw_writel(con, base + 0x00);
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+static int s3c_gpiolib_output(struct gpio_chip *chip,
+			      unsigned offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	local_irq_save(flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+	con |= 1 << (offset * 2);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+static void s3c_gpiolib_set(struct gpio_chip *chip,
+			    unsigned offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+
+	local_irq_save(flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+}
+
+static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	unsigned long val;
+
+	val = __raw_readl(ourchip->base + 0x04);
+	val >>= offset;
+	val &= 1;
+
+	return val;
+}
+
+__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
+{
+	struct gpio_chip *gc = &chip->chip;
+	int ret;
+
+	BUG_ON(!chip->base);
+	BUG_ON(!gc->label);
+	BUG_ON(!gc->ngpio);
+
+	if (!gc->direction_input)
+		gc->direction_input = s3c_gpiolib_input;
+	if (!gc->direction_output)
+		gc->direction_output = s3c_gpiolib_output;
+	if (!gc->set)
+		gc->set = s3c_gpiolib_set;
+	if (!gc->get)
+		gc->get = s3c_gpiolib_get;
+
+	/* gpiochip_add() prints own failure message on error. */
+	ret = gpiochip_add(gc);
+	if (ret >= 0)
+		s3c_gpiolib_track(chip);
+}
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/plat-s3c/include/mach/io.h
new file mode 100644
index 000000000000..f6a53631b665
--- /dev/null
+++ b/arch/arm/plat-s3c/include/mach/io.h
@@ -0,0 +1,18 @@
+/* arch/arm/plat-s3c/include/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for plat-s3c based systems, such as S3C24A0
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/plat-s3c/include/mach/timex.h
index 2a425ed0a7e0..2a425ed0a7e0 100644
--- a/arch/arm/mach-s3c2410/include/mach/timex.h
+++ b/arch/arm/plat-s3c/include/mach/timex.h
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/plat-s3c/include/mach/vmalloc.h
index 315b0078a34d..bfd2ca6e3074 100644
--- a/arch/arm/mach-s3c2410/include/mach/vmalloc.h
+++ b/arch/arm/plat-s3c/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
+/* arch/arm/plat-s3c/include/mach/vmalloc.h
  *
  * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
  *
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
new file mode 100644
index 000000000000..43df2a404b0b
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -0,0 +1,29 @@
+/* arch/arm/plat-s3c/include/plat/adc.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simnte.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX ADC driver information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ADC_H
+#define __ASM_PLAT_ADC_H __FILE__
+
+struct s3c_adc_client;
+
+extern int s3c_adc_start(struct s3c_adc_client *client,
+			 unsigned int channel, unsigned int nr_samples);
+
+extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
+					       void (*select)(unsigned selected),
+					       void (*conv)(unsigned d0, unsigned d1),
+					       unsigned int is_ts);
+
+extern void s3c_adc_release(struct s3c_adc_client *client);
+
+#endif /* __ASM_PLAT_ADC_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h
index 235b753cd877..a10622eed43a 100644
--- a/arch/arm/plat-s3c24xx/include/plat/clock.h
+++ b/arch/arm/plat-s3c/include/plat/clock.h
@@ -1,5 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/clock.h
- * linux/arch/arm/mach-s3c2410/clock.h
+/* linux/arch/arm/plat-s3c/include/plat/clock.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/SWLINUX/
@@ -10,6 +9,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <linux/spinlock.h>
+
 struct clk {
 	struct list_head      list;
 	struct module        *owner;
@@ -44,21 +45,44 @@ extern struct clk clk_h;
 extern struct clk clk_p;
 extern struct clk clk_mpll;
 extern struct clk clk_upll;
+extern struct clk clk_epll;
 extern struct clk clk_xtal;
+extern struct clk clk_ext;
+
+/* S3C64XX specific clocks */
+extern struct clk clk_27m;
+extern struct clk clk_48m;
 
 /* exports for arch/arm/mach-s3c2410
  *
  * Please DO NOT use these outside of arch/arm/mach-s3c2410
 */
 
-extern struct mutex clocks_mutex;
+extern spinlock_t clocks_lock;
 
 extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
 
 extern int s3c24xx_register_clock(struct clk *clk);
 extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
 
-extern int s3c24xx_setup_clocks(unsigned long xtal,
-				unsigned long fclk,
-				unsigned long hclk,
-				unsigned long pclk);
+extern int s3c24xx_register_baseclocks(unsigned long xtal);
+
+extern void s3c64xx_register_clocks(void);
+
+extern void s3c24xx_setup_clocks(unsigned long fclk,
+				 unsigned long hclk,
+				 unsigned long pclk);
+
+extern void s3c2410_setup_clocks(void);
+extern void s3c2412_setup_clocks(void);
+extern void s3c244x_setup_clocks(void);
+extern void s3c2443_setup_clocks(void);
+
+/* S3C64XX specific functions and clocks */
+
+extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
+
+/* Init for pwm clock code */
+
+extern void s3c_pwmclk_init(void);
+
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
new file mode 100644
index 000000000000..c86a13307e90
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -0,0 +1,94 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - driver and board
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/cpufreq.h>
+
+struct s3c_cpufreq_info;
+struct s3c_cpufreq_board;
+struct s3c_iotimings;
+
+struct s3c_freq {
+	unsigned long	fclk;
+	unsigned long	armclk;
+	unsigned long	hclk_tns;	/* in 10ths of ns */
+	unsigned long	hclk;
+	unsigned long	pclk;
+};
+
+/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+ * notification can use this information that is not provided by just
+ * having the core frequency alone.
+ */
+
+struct s3c_cpufreq_freqs {
+	struct cpufreq_freqs	freqs;
+	struct s3c_freq		old;
+	struct s3c_freq		new;
+};
+
+#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
+
+struct s3c_clkdivs {
+	int		p_divisor;	/* fclk / pclk */
+	int		h_divisor;	/* fclk / hclk */
+	int		arm_divisor;	/* not all cpus have this. */
+	unsigned char	dvs;		/* using dvs mode to arm. */
+};
+
+#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
+
+struct s3c_pllval {
+	unsigned long		freq;
+	unsigned long		pll_reg;
+};
+
+struct s3c_cpufreq_config {
+	struct s3c_freq		freq;
+	struct s3c_pllval	pll;
+	struct s3c_clkdivs	divs;
+	struct s3c_cpufreq_info *info;	/* for core, not drivers */
+	struct s3c_cpufreq_board *board;
+};
+
+/* s3c_cpufreq_board
+ *
+ * per-board configuraton information, such as memory refresh and
+ * how to initialise IO timings.
+ */
+struct s3c_cpufreq_board {
+	unsigned int	refresh;	/* refresh period in ns */
+	unsigned int	auto_io:1;	/* automatically init io timings. */
+	unsigned int	need_io:1;	/* set if needs io timing support. */
+
+	/* any non-zero field in here is taken as an upper limit. */
+	struct s3c_freq	max;	/* frequency limits */
+};
+
+/* Things depending on frequency scaling. */
+#ifdef CONFIG_CPU_FREQ_S3C
+#define __init_or_cpufreq
+#else
+#define __init_or_cpufreq __init
+#endif
+
+/* Board functions */
+
+#ifdef CONFIG_CPU_FREQ_S3C
+extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
+#else
+
+static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+	return 0;
+}
+#endif  /* CONFIG_CPU_FREQ_S3C */
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index 23e420e8bd5b..e62ae0fcfe56 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/cpu.h
+/* linux/arch/arm/plat-s3c/include/plat/cpu.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -18,7 +18,7 @@
 #define MHZ (1000*1000)
 #endif
 
-#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
+#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000)
 
 /* forward declaration */
 struct s3c24xx_uart_resources;
@@ -26,11 +26,28 @@ struct platform_device;
 struct s3c2410_uartcfg;
 struct map_desc;
 
+/* per-cpu initialisation function table. */
+
+struct cpu_table {
+	unsigned long	idcode;
+	unsigned long	idmask;
+	void		(*map_io)(void);
+	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
+	void		(*init_clocks)(int xtal);
+	int		(*init)(void);
+	const char	*name;
+};
+
+extern void s3c_init_cpu(unsigned long idcode,
+			 struct cpu_table *cpus, unsigned int cputab_size);
+
 /* core initialisation functions */
 
 extern void s3c24xx_init_irq(void);
+extern void s3c64xx_init_irq(u32 vic0, u32 vic1);
 
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
+extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
 
 extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-s3c/include/plat/debug-macro.S
index 4aa7e2e6c001..3634d4e3708b 100644
--- a/arch/arm/plat-s3c/include/plat/debug-macro.S
+++ b/arch/arm/plat-s3c/include/plat/debug-macro.S
@@ -20,7 +20,7 @@
 	.endm
 
 #ifndef fifo_level
-#define fifo_level fifo_level_s3c2410
+#define fifo_level fifo_level_s3c2440
 #endif
 
 	.macro  fifo_full_s3c2440 rd, rx
diff --git a/arch/arm/plat-s3c24xx/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index badaac9d64a8..6b1b5231511c 100644
--- a/arch/arm/plat-s3c24xx/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -17,21 +17,26 @@ struct s3c24xx_uart_resources {
 };
 
 extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
 
 extern struct platform_device *s3c24xx_uart_devs[];
 extern struct platform_device *s3c24xx_uart_src[];
 
 extern struct platform_device s3c_device_timer[];
 
+extern struct platform_device s3c_device_fb;
 extern struct platform_device s3c_device_usb;
 extern struct platform_device s3c_device_lcd;
 extern struct platform_device s3c_device_wdt;
-extern struct platform_device s3c_device_i2c;
+extern struct platform_device s3c_device_i2c0;
+extern struct platform_device s3c_device_i2c1;
 extern struct platform_device s3c_device_iis;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_hsmmc;
+extern struct platform_device s3c_device_hsmmc0;
+extern struct platform_device s3c_device_hsmmc1;
+extern struct platform_device s3c_device_hsmmc2;
 
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;
diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-s3c/include/plat/fb.h
new file mode 100644
index 000000000000..214ff561b0dd
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/fb.h
@@ -0,0 +1,73 @@
+/* linux/arch/arm/plat-s3c/include/plat/fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - FB platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_FB_H
+#define __PLAT_S3C_FB_H __FILE__
+
+/**
+ * struct s3c_fb_pd_win - per window setup data
+ * @win_mode: The display parameters to initialise (not for window 0)
+ * @virtual_x: The virtual X size.
+ * @virtual_y: The virtual Y size.
+ */
+struct s3c_fb_pd_win {
+	struct fb_videomode	win_mode;
+
+	unsigned short		default_bpp;
+	unsigned short		max_bpp;
+	unsigned short		virtual_x;
+	unsigned short		virtual_y;
+};
+
+/**
+ * struct s3c_fb_platdata -  S3C driver platform specific information
+ * @setup_gpio: Setup the external GPIO pins to the right state to transfer
+ *		the data from the display system to the connected display
+ *		device.
+ * @vidcon0: The base vidcon0 values to control the panel data format.
+ * @vidcon1: The base vidcon1 values to control the panel data output.
+ * @win: The setup data for each hardware window, or NULL for unused.
+ * @display_mode: The LCD output display mode.
+ *
+ * The platform data supplies the video driver with all the information
+ * it requires to work with the display(s) attached to the machine. It
+ * controls the initial mode, the number of display windows (0 is always
+ * the base framebuffer) that are initialised etc.
+ *
+ */
+struct s3c_fb_platdata {
+	void	(*setup_gpio)(void);
+
+	struct s3c_fb_pd_win	*win[S3C_FB_MAX_WIN];
+
+	u32			 vidcon0;
+	u32			 vidcon1;
+};
+
+/**
+ * s3c_fb_set_platdata() - Setup the FB device with platform data.
+ * @pd: The platform data to set. The data is copied from the passed structure
+ *      so the machine data can mark the data __initdata so that any unused
+ *      machines will end up dumping their data at runtime.
+ */
+extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
+
+/**
+ * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s3c64xx_fb_gpio_setup_24bpp(void);
+
+#endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
new file mode 100644
index 000000000000..652e2bbdaa20
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
@@ -0,0 +1,176 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This is meant for core cpu support, machine or other driver files
+ * should not be including this header.
+ */
+
+#ifndef __PLAT_GPIO_CFG_HELPERS_H
+#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
+
+/* As a note, all gpio configuration functions are entered exclusively, either
+ * with the relevant lock held or the system prevented from doing anything else
+ * by disabling interrupts.
+*/
+
+static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip,
+				     unsigned int off, unsigned int config)
+{
+	return (chip->config->set_config)(chip, off, config);
+}
+
+static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
+				      unsigned int off, s3c_gpio_pull_t pull)
+{
+	return (chip->config->set_pull)(chip, off, pull);
+}
+
+/**
+ * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ *	00 = input
+ *	01 = output
+ *	1x = special function
+*/
+extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
+				   unsigned int off, unsigned int cfg);
+
+/**
+ * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+*/
+extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
+				     unsigned int off, unsigned int cfg);
+
+/**
+ * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ *	0000 = Input
+ *	0001 = Output
+ *	others = Special functions (dependant on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a seperate set of functions for
+ * each case.
+*/
+extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+					unsigned int off, unsigned int cfg);
+
+
+/* Pull-{up,down} resistor controls.
+ *
+ * S3C2410,S3C2440,S3C24A0 = Pull-UP,
+ * S3C2412,S3C2413 = Pull-Down
+ * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
+ * S3C2443 = Pull-Both [not same as S3C6400]
+ */
+
+/**
+ * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-up resistor.
+ */
+extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+				unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * @chip: The gpio chip that is being configured
+ * @off: The offset for the GPIO being configured
+ * @param: pull: The pull mode being requested
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-down resistor.
+ */
+extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
+				  unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ *	00 = No pull resistor connected
+ *	01 = Pull-up resistor connected
+ *	10 = Pull-down resistor connected
+ */
+extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
+				   unsigned int off, s3c_gpio_pull_t pull);
+
+
+/**
+ * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_upown.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
+					       unsigned int off);
+
+/**
+ * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ *	00 = Pull-up resistor connected
+ *	10 = Pull-down resistor connected
+ *	x1 = No pull up resistor
+ */
+extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
+				    unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors
+ * @chip: The gpio chip that the GPIO pin belongs to.
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_upown.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip,
+						unsigned int off);
+
+#endif /* __PLAT_GPIO_CFG_HELPERS_H */
+
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg.h b/arch/arm/plat-s3c/include/plat/gpio-cfg.h
new file mode 100644
index 000000000000..29cd6a86cade
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/gpio-cfg.h
@@ -0,0 +1,110 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+/* Note, this interface is being added to the s3c64xx arch first and will
+ * be added to the s3c24xx systems later.
+ */
+
+#ifndef __PLAT_GPIO_CFG_H
+#define __PLAT_GPIO_CFG_H __FILE__
+
+typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+
+/* forward declaration if gpio-core.h hasn't been included */
+struct s3c_gpio_chip;
+
+/**
+ * struct s3c_gpio_cfg GPIO configuration
+ * @cfg_eint: Configuration setting when used for external interrupt source
+ * @get_pull: Read the current pull configuration for the GPIO
+ * @set_pull: Set the current pull configuraiton for the GPIO
+ * @set_config: Set the current configuration for the GPIO
+ * @get_config: Read the current configuration for the GPIO
+ *
+ * Each chip can have more than one type of GPIO bank available and some
+ * have different capabilites even when they have the same control register
+ * layouts. Provide an point to vector control routine and provide any
+ * per-bank configuration information that other systems such as the
+ * external interrupt code will need.
+ */
+struct s3c_gpio_cfg {
+	unsigned int	cfg_eint;
+
+	s3c_gpio_pull_t	(*get_pull)(struct s3c_gpio_chip *chip, unsigned offs);
+	int		(*set_pull)(struct s3c_gpio_chip *chip, unsigned offs,
+				    s3c_gpio_pull_t pull);
+
+	unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs);
+	int	 (*set_config)(struct s3c_gpio_chip *chip, unsigned offs,
+			       unsigned config);
+};
+
+#define S3C_GPIO_SPECIAL_MARK	(0xfffffff0)
+#define S3C_GPIO_SPECIAL(x)	(S3C_GPIO_SPECIAL_MARK | (x))
+
+/* Defines for generic pin configurations */
+#define S3C_GPIO_INPUT	(S3C_GPIO_SPECIAL(0))
+#define S3C_GPIO_OUTPUT	(S3C_GPIO_SPECIAL(1))
+#define S3C_GPIO_SFN(x)	(S3C_GPIO_SPECIAL(x))
+
+#define s3c_gpio_is_cfg_special(_cfg) \
+	(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
+
+/**
+ * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
+ * @pin pin The pin number to configure.
+ * @pin to The configuration for the pin's function.
+ *
+ * Configure which function is actually connected to the external
+ * pin, such as an gpio input, output or some form of special function
+ * connected to an internal peripheral block.
+ */
+extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
+
+/* Define values for the pull-{up,down} available for each gpio pin.
+ *
+ * These values control the state of the weak pull-{up,down} resistors
+ * available on most pins on the S3C series. Not all chips support both
+ * up or down settings, and it may be dependant on the chip that is being
+ * used to whether the particular mode is available.
+ */
+#define S3C_GPIO_PULL_NONE	((__force s3c_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN	((__force s3c_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP	((__force s3c_gpio_pull_t)0x02)
+
+/**
+ * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
+ * @pin: The pin number to configure the pull resistor.
+ * @pull: The configuration for the pull resistor.
+ *
+ * This function sets the state of the pull-{up,down} resistor for the
+ * specified pin. It will return 0 if successfull, or a negative error
+ * code if the pin cannot support the requested pull setting.
+*/
+extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the pull resistor value for the specified pin.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+
+#endif /* __PLAT_GPIO_CFG_H */
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h
new file mode 100644
index 000000000000..2fc60a580ac8
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/gpio-core.h
@@ -0,0 +1,77 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Define the core gpiolib support functions that the s3c platforms may
+ * need to extend or change depending on the hardware and the s3c chip
+ * selected at build or found at run time.
+ *
+ * These definitions are not intended for driver inclusion, there is
+ * nothing here that should not live outside the platform and core
+ * specific code.
+*/
+
+struct s3c_gpio_cfg;
+
+/**
+ * struct s3c_gpio_chip - wrapper for specific implementation of gpio
+ * @chip: The chip structure to be exported via gpiolib.
+ * @base: The base pointer to the gpio configuration registers.
+ * @config: special function and pull-resistor control information.
+ *
+ * This wrapper provides the necessary information for the Samsung
+ * specific gpios being registered with gpiolib.
+ */
+struct s3c_gpio_chip {
+	struct gpio_chip	chip;
+	struct s3c_gpio_cfg	*config;
+	void __iomem		*base;
+};
+
+static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+{
+	return container_of(gpc, struct s3c_gpio_chip, chip);
+}
+
+/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
+
+/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to s3c_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own s3c_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
+{
+	return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
+}
+#else
+/* machine specific code should provide s3c_gpiolib_getchip */
+
+static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
+#endif
diff --git a/arch/arm/plat-s3c/include/plat/iic-core.h b/arch/arm/plat-s3c/include/plat/iic-core.h
new file mode 100644
index 000000000000..36397ca20962
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/iic-core.h
@@ -0,0 +1,35 @@
+/* arch/arm/mach-s3c2410/include/mach/iic-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - I2C Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IIC_CORE_H
+#define __ASM_ARCH_IIC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_i2c0_setname(char *name)
+{
+	/* currently this device is always compiled in */
+	s3c_device_i2c0.name = name;
+}
+
+static inline void s3c_i2c1_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C1
+	s3c_device_i2c1.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_IIC_H */
diff --git a/include/asm-arm/plat-s3c/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
index 5106acaa1d0e..dc1dfcb9bc6c 100644
--- a/include/asm-arm/plat-s3c/iic.h
+++ b/arch/arm/plat-s3c/include/plat/iic.h
@@ -28,6 +28,30 @@ struct s3c2410_platform_i2c {
 	unsigned long	max_freq;	/* max frequency for the bus */
 	unsigned long	min_freq;	/* min frequency for the bus */
 	unsigned int	sda_delay;	/* pclks (s3c2440 only) */
+
+	void	(*cfg_gpio)(struct platform_device *dev);
 };
 
+/**
+ * s3c_i2c0_set_platdata - set platform data for i2c0 device
+ * @i2c: The platform data to set, or NULL for default data.
+ *
+ * Register the given platform data for use with the i2c0 device. This
+ * call copies the platform data, so the caller can use __initdata for
+ * their copy.
+ *
+ * This call will set cfg_gpio if is null to the default platform
+ * implementation.
+ *
+ * Any user of s3c_device_i2c0 should call this, even if it is with
+ * NULL to ensure that the device is given the default platform data
+ * as the driver will no longer carry defaults.
+ */
+extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
+
+/* defined by architecture to configure gpio */
+extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
+
 #endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-s3c/include/plat/map.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d32a54..b84289d32a54 100644
--- a/arch/arm/plat-s3c/include/plat/map.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
diff --git a/include/asm-arm/plat-s3c/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
index f4dcd14af059..f4dcd14af059 100644
--- a/include/asm-arm/plat-s3c/nand.h
+++ b/arch/arm/plat-s3c/include/plat/nand.h
diff --git a/include/asm-arm/plat-s3c/regs-ac97.h b/arch/arm/plat-s3c/include/plat/regs-ac97.h
index c3878f7acb83..c3878f7acb83 100644
--- a/include/asm-arm/plat-s3c/regs-ac97.h
+++ b/arch/arm/plat-s3c/include/plat/regs-ac97.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb.h b/arch/arm/plat-s3c/include/plat/regs-fb.h
new file mode 100644
index 000000000000..e9ee599d430e
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-fb.h
@@ -0,0 +1,366 @@
+/* arch/arm/plat-s3c/include/plat/regs-fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards into the S3C2416, S3C2450 and the
+ * S3C64XX series such as the S3C6400 and S3C6410.
+ *
+ * The file does not contain the cpu specific items which are based on
+ * whichever architecture is selected, it only contains the core of the
+ * register set. See <mach/regs-fb.h> to get the specifics.
+ *
+ * Note, we changed to using regs-fb.h as it avoids any clashes with
+ * the original regs-lcd.h so out of the way of regs-lcd.h as well as
+ * indicating the newer block is much more than just an LCD interface.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Please do not include this file directly, use <mach/regs-fb.h> to
+ * ensure all the localised SoC support is included as necessary.
+*/
+
+/* VIDCON0 */
+
+#define VIDCON0					(0x00)
+#define VIDCON0_INTERLACE			(1 << 29)
+#define VIDCON0_VIDOUT_MASK			(0x3 << 26)
+#define VIDCON0_VIDOUT_SHIFT			(26)
+#define VIDCON0_VIDOUT_RGB			(0x0 << 26)
+#define VIDCON0_VIDOUT_TV			(0x1 << 26)
+#define VIDCON0_VIDOUT_I80_LDI0			(0x2 << 26)
+#define VIDCON0_VIDOUT_I80_LDI1			(0x3 << 26)
+
+#define VIDCON0_L1_DATA_MASK			(0x7 << 23)
+#define VIDCON0_L1_DATA_SHIFT			(23)
+#define VIDCON0_L1_DATA_16BPP			(0x0 << 23)
+#define VIDCON0_L1_DATA_18BPP16			(0x1 << 23)
+#define VIDCON0_L1_DATA_18BPP9			(0x2 << 23)
+#define VIDCON0_L1_DATA_24BPP			(0x3 << 23)
+#define VIDCON0_L1_DATA_18BPP			(0x4 << 23)
+#define VIDCON0_L1_DATA_16BPP8			(0x5 << 23)
+
+#define VIDCON0_L0_DATA_MASK			(0x7 << 20)
+#define VIDCON0_L0_DATA_SHIFT			(20)
+#define VIDCON0_L0_DATA_16BPP			(0x0 << 20)
+#define VIDCON0_L0_DATA_18BPP16			(0x1 << 20)
+#define VIDCON0_L0_DATA_18BPP9			(0x2 << 20)
+#define VIDCON0_L0_DATA_24BPP			(0x3 << 20)
+#define VIDCON0_L0_DATA_18BPP			(0x4 << 20)
+#define VIDCON0_L0_DATA_16BPP8			(0x5 << 20)
+
+#define VIDCON0_PNRMODE_MASK			(0x3 << 17)
+#define VIDCON0_PNRMODE_SHIFT			(17)
+#define VIDCON0_PNRMODE_RGB			(0x0 << 17)
+#define VIDCON0_PNRMODE_BGR			(0x1 << 17)
+#define VIDCON0_PNRMODE_SERIAL_RGB		(0x2 << 17)
+#define VIDCON0_PNRMODE_SERIAL_BGR		(0x3 << 17)
+
+#define VIDCON0_CLKVALUP			(1 << 16)
+#define VIDCON0_CLKVAL_F_MASK			(0xff << 6)
+#define VIDCON0_CLKVAL_F_SHIFT			(6)
+#define VIDCON0_CLKVAL_F_LIMIT			(0xff)
+#define VIDCON0_CLKVAL_F(_x)			((_x) << 6)
+#define VIDCON0_VLCKFREE			(1 << 5)
+#define VIDCON0_CLKDIR				(1 << 4)
+
+#define VIDCON0_CLKSEL_MASK			(0x3 << 2)
+#define VIDCON0_CLKSEL_SHIFT			(2)
+#define VIDCON0_CLKSEL_HCLK			(0x0 << 2)
+#define VIDCON0_CLKSEL_LCD			(0x1 << 2)
+#define VIDCON0_CLKSEL_27M			(0x3 << 2)
+
+#define VIDCON0_ENVID				(1 << 1)
+#define VIDCON0_ENVID_F				(1 << 0)
+
+#define VIDCON1					(0x04)
+#define VIDCON1_LINECNT_MASK			(0x7ff << 16)
+#define VIDCON1_LINECNT_SHIFT			(16)
+#define VIDCON1_LINECNT_GET(_v)			(((_v) >> 16) & 0x7ff)
+#define VIDCON1_VSTATUS_MASK			(0x3 << 13)
+#define VIDCON1_VSTATUS_SHIFT			(13)
+#define VIDCON1_VSTATUS_VSYNC			(0x0 << 13)
+#define VIDCON1_VSTATUS_BACKPORCH		(0x1 << 13)
+#define VIDCON1_VSTATUS_ACTIVE			(0x2 << 13)
+#define VIDCON1_VSTATUS_FRONTPORCH		(0x0 << 13)
+
+#define VIDCON1_INV_VCLK			(1 << 7)
+#define VIDCON1_INV_HSYNC			(1 << 6)
+#define VIDCON1_INV_VSYNC			(1 << 5)
+#define VIDCON1_INV_VDEN			(1 << 4)
+
+/* VIDCON2 */
+
+#define VIDCON2					(0x08)
+#define VIDCON2_EN601				(1 << 23)
+#define VIDCON2_TVFMTSEL_SW			(1 << 14)
+
+#define VIDCON2_TVFMTSEL1_MASK			(0x3 << 12)
+#define VIDCON2_TVFMTSEL1_SHIFT			(12)
+#define VIDCON2_TVFMTSEL1_RGB			(0x0 << 12)
+#define VIDCON2_TVFMTSEL1_YUV422		(0x1 << 12)
+#define VIDCON2_TVFMTSEL1_YUV444		(0x2 << 12)
+
+#define VIDCON2_ORGYCbCr			(1 << 8)
+#define VIDCON2_YUVORDCrCb			(1 << 7)
+
+/* VIDTCON0 */
+
+#define VIDTCON0_VBPDE_MASK			(0xff << 24)
+#define VIDTCON0_VBPDE_SHIFT			(24)
+#define VIDTCON0_VBPDE_LIMIT			(0xff)
+#define VIDTCON0_VBPDE(_x)			((_x) << 24)
+
+#define VIDTCON0_VBPD_MASK			(0xff << 16)
+#define VIDTCON0_VBPD_SHIFT			(16)
+#define VIDTCON0_VBPD_LIMIT			(0xff)
+#define VIDTCON0_VBPD(_x)			((_x) << 16)
+
+#define VIDTCON0_VFPD_MASK			(0xff << 8)
+#define VIDTCON0_VFPD_SHIFT			(8)
+#define VIDTCON0_VFPD_LIMIT			(0xff)
+#define VIDTCON0_VFPD(_x)			((_x) << 8)
+
+#define VIDTCON0_VSPW_MASK			(0xff << 0)
+#define VIDTCON0_VSPW_SHIFT			(0)
+#define VIDTCON0_VSPW_LIMIT			(0xff)
+#define VIDTCON0_VSPW(_x)			((_x) << 0)
+
+/* VIDTCON1 */
+
+#define VIDTCON1_VFPDE_MASK			(0xff << 24)
+#define VIDTCON1_VFPDE_SHIFT			(24)
+#define VIDTCON1_VFPDE_LIMIT			(0xff)
+#define VIDTCON1_VFPDE(_x)			((_x) << 24)
+
+#define VIDTCON1_HBPD_MASK			(0xff << 16)
+#define VIDTCON1_HBPD_SHIFT			(16)
+#define VIDTCON1_HBPD_LIMIT			(0xff)
+#define VIDTCON1_HBPD(_x)			((_x) << 16)
+
+#define VIDTCON1_HFPD_MASK			(0xff << 8)
+#define VIDTCON1_HFPD_SHIFT			(8)
+#define VIDTCON1_HFPD_LIMIT			(0xff)
+#define VIDTCON1_HFPD(_x)			((_x) << 8)
+
+#define VIDTCON1_HSPW_MASK			(0xff << 0)
+#define VIDTCON1_HSPW_SHIFT			(0)
+#define VIDTCON1_HSPW_LIMIT			(0xff)
+#define VIDTCON1_HSPW(_x)			((_x) << 0)
+
+#define VIDTCON2				(0x18)
+#define VIDTCON2_LINEVAL_MASK			(0x7ff << 11)
+#define VIDTCON2_LINEVAL_SHIFT			(11)
+#define VIDTCON2_LINEVAL_LIMIT			(0x7ff)
+#define VIDTCON2_LINEVAL(_x)			((_x) << 11)
+
+#define VIDTCON2_HOZVAL_MASK			(0x7ff << 0)
+#define VIDTCON2_HOZVAL_SHIFT			(0)
+#define VIDTCON2_HOZVAL_LIMIT			(0x7ff)
+#define VIDTCON2_HOZVAL(_x)			((_x) << 0)
+
+/* WINCONx */
+
+
+#define WINCONx_BITSWP				(1 << 18)
+#define WINCONx_BYTSWP				(1 << 17)
+#define WINCONx_HAWSWP				(1 << 16)
+#define WINCONx_BURSTLEN_MASK			(0x3 << 9)
+#define WINCONx_BURSTLEN_SHIFT			(9)
+#define WINCONx_BURSTLEN_16WORD			(0x0 << 9)
+#define WINCONx_BURSTLEN_8WORD			(0x1 << 9)
+#define WINCONx_BURSTLEN_4WORD			(0x2 << 9)
+
+#define WINCONx_ENWIN				(1 << 0)
+#define WINCON0_BPPMODE_MASK			(0xf << 2)
+#define WINCON0_BPPMODE_SHIFT			(2)
+#define WINCON0_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON0_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON0_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON0_BPPMODE_8BPP_PALETTE		(0x3 << 2)
+#define WINCON0_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON0_BPPMODE_16BPP_1555		(0x7 << 2)
+#define WINCON0_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON0_BPPMODE_24BPP_888		(0xb << 2)
+
+#define WINCON1_BLD_PIX				(1 << 6)
+
+#define WINCON1_ALPHA_SEL			(1 << 1)
+#define WINCON1_BPPMODE_MASK			(0xf << 2)
+#define WINCON1_BPPMODE_SHIFT			(2)
+#define WINCON1_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON1_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON1_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON1_BPPMODE_8BPP_PALETTE		(0x3 << 2)
+#define WINCON1_BPPMODE_8BPP_1232		(0x4 << 2)
+#define WINCON1_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON1_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON1_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON1_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON1_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON1_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON1_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON1_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON1_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON1_BPPMODE_28BPP_A4888		(0xd << 2)
+
+
+#define VIDOSDxA_TOPLEFT_X_MASK			(0x7ff << 11)
+#define VIDOSDxA_TOPLEFT_X_SHIFT		(11)
+#define VIDOSDxA_TOPLEFT_X_LIMIT		(0x7ff)
+#define VIDOSDxA_TOPLEFT_X(_x)			((_x) << 11)
+
+#define VIDOSDxA_TOPLEFT_Y_MASK			(0x7ff << 0)
+#define VIDOSDxA_TOPLEFT_Y_SHIFT		(0)
+#define VIDOSDxA_TOPLEFT_Y_LIMIT		(0x7ff)
+#define VIDOSDxA_TOPLEFT_Y(_x)			((_x) << 0)
+
+#define VIDOSDxB_BOTRIGHT_X_MASK		(0x7ff << 11)
+#define VIDOSDxB_BOTRIGHT_X_SHIFT		(11)
+#define VIDOSDxB_BOTRIGHT_X_LIMIT		(0x7ff)
+#define VIDOSDxB_BOTRIGHT_X(_x)			((_x) << 11)
+
+#define VIDOSDxB_BOTRIGHT_Y_MASK		(0x7ff << 0)
+#define VIDOSDxB_BOTRIGHT_Y_SHIFT		(0)
+#define VIDOSDxB_BOTRIGHT_Y_LIMIT		(0x7ff)
+#define VIDOSDxB_BOTRIGHT_Y(_x)			((_x) << 0)
+
+/* For VIDOSD[1..4]C */
+#define VIDISD14C_ALPHA0_R(_x)			((_x) << 20)
+#define VIDISD14C_ALPHA0_G_MASK			(0xf << 16)
+#define VIDISD14C_ALPHA0_G_SHIFT		(16)
+#define VIDISD14C_ALPHA0_G_LIMIT		(0xf)
+#define VIDISD14C_ALPHA0_G(_x)			((_x) << 16)
+#define VIDISD14C_ALPHA0_B_MASK			(0xf << 12)
+#define VIDISD14C_ALPHA0_B_SHIFT		(12)
+#define VIDISD14C_ALPHA0_B_LIMIT		(0xf)
+#define VIDISD14C_ALPHA0_B(_x)			((_x) << 12)
+#define VIDISD14C_ALPHA1_R_MASK			(0xf << 8)
+#define VIDISD14C_ALPHA1_R_SHIFT		(8)
+#define VIDISD14C_ALPHA1_R_LIMIT		(0xf)
+#define VIDISD14C_ALPHA1_R(_x)			((_x) << 8)
+#define VIDISD14C_ALPHA1_G_MASK			(0xf << 4)
+#define VIDISD14C_ALPHA1_G_SHIFT		(4)
+#define VIDISD14C_ALPHA1_G_LIMIT		(0xf)
+#define VIDISD14C_ALPHA1_G(_x)			((_x) << 4)
+#define VIDISD14C_ALPHA1_B_MASK			(0xf << 0)
+#define VIDISD14C_ALPHA1_B_SHIFT		(0)
+#define VIDISD14C_ALPHA1_B_LIMIT		(0xf)
+#define VIDISD14C_ALPHA1_B(_x)			((_x) << 0)
+
+/* Video buffer addresses */
+#define VIDW_BUF_START(_buff)			(0xA0 + ((_buff) * 8))
+#define VIDW_BUF_START1(_buff)			(0xA4 + ((_buff) * 8))
+#define VIDW_BUF_END(_buff)			(0xD0 + ((_buff) * 8))
+#define VIDW_BUF_END1(_buff)			(0xD4 + ((_buff) * 8))
+#define VIDW_BUF_SIZE(_buff)			(0x100 + ((_buff) * 4))
+
+#define VIDW_BUF_SIZE_OFFSET_MASK		(0x1fff << 13)
+#define VIDW_BUF_SIZE_OFFSET_SHIFT		(13)
+#define VIDW_BUF_SIZE_OFFSET_LIMIT		(0x1fff)
+#define VIDW_BUF_SIZE_OFFSET(_x)		((_x) << 13)
+
+#define VIDW_BUF_SIZE_PAGEWIDTH_MASK		(0x1fff << 0)
+#define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT		(0)
+#define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT		(0x1fff)
+#define VIDW_BUF_SIZE_PAGEWIDTH(_x)		((_x) << 0)
+
+/* Interrupt controls and status */
+
+#define VIDINTCON0_FIFOINTERVAL_MASK		(0x3f << 20)
+#define VIDINTCON0_FIFOINTERVAL_SHIFT		(20)
+#define VIDINTCON0_FIFOINTERVAL_LIMIT		(0x3f)
+#define VIDINTCON0_FIFOINTERVAL(_x)		((_x) << 20)
+
+#define VIDINTCON0_INT_SYSMAINCON		(1 << 19)
+#define VIDINTCON0_INT_SYSSUBCON		(1 << 18)
+#define VIDINTCON0_INT_I80IFDONE		(1 << 17)
+
+#define VIDINTCON0_FRAMESEL0_MASK		(0x3 << 15)
+#define VIDINTCON0_FRAMESEL0_SHIFT		(15)
+#define VIDINTCON0_FRAMESEL0_BACKPORCH		(0x0 << 15)
+#define VIDINTCON0_FRAMESEL0_VSYNC		(0x1 << 15)
+#define VIDINTCON0_FRAMESEL0_ACTIVE		(0x2 << 15)
+#define VIDINTCON0_FRAMESEL0_FRONTPORCH		(0x3 << 15)
+
+#define VIDINTCON0_FRAMESEL1			(1 << 14)
+#define VIDINTCON0_FRAMESEL1_NONE		(0x0 << 14)
+#define VIDINTCON0_FRAMESEL1_BACKPORCH		(0x1 << 14)
+#define VIDINTCON0_FRAMESEL1_VSYNC		(0x2 << 14)
+#define VIDINTCON0_FRAMESEL1_FRONTPORCH		(0x3 << 14)
+
+#define VIDINTCON0_INT_FRAME			(1 << 12)
+#define VIDINTCON0_FIFIOSEL_MASK		(0x7f << 5)
+#define VIDINTCON0_FIFIOSEL_SHIFT		(5)
+#define VIDINTCON0_FIFIOSEL_WINDOW0		(0x1 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW1		(0x2 << 5)
+
+#define VIDINTCON0_FIFOLEVEL_MASK		(0x7 << 2)
+#define VIDINTCON0_FIFOLEVEL_SHIFT		(2)
+#define VIDINTCON0_FIFOLEVEL_TO25PC		(0x0 << 2)
+#define VIDINTCON0_FIFOLEVEL_TO50PC		(0x1 << 2)
+#define VIDINTCON0_FIFOLEVEL_TO75PC		(0x2 << 2)
+#define VIDINTCON0_FIFOLEVEL_EMPTY		(0x3 << 2)
+#define VIDINTCON0_FIFOLEVEL_FULL		(0x4 << 2)
+
+#define VIDINTCON0_INT_FIFO_MASK		(0x3 << 0)
+#define VIDINTCON0_INT_FIFO_SHIFT		(0)
+#define VIDINTCON0_INT_ENABLE			(1 << 0)
+
+#define VIDINTCON1				(0x134)
+#define VIDINTCON1_INT_I180			(1 << 2)
+#define VIDINTCON1_INT_FRAME			(1 << 1)
+#define VIDINTCON1_INT_FIFO			(1 << 0)
+
+/* Window colour-key control registers */
+
+#define WxKEYCON0_KEYBL_EN			(1 << 26)
+#define WxKEYCON0_KEYEN_F			(1 << 25)
+#define WxKEYCON0_DIRCON			(1 << 24)
+#define WxKEYCON0_COMPKEY_MASK			(0xffffff << 0)
+#define WxKEYCON0_COMPKEY_SHIFT			(0)
+#define WxKEYCON0_COMPKEY_LIMIT			(0xffffff)
+#define WxKEYCON0_COMPKEY(_x)			((_x) << 0)
+#define WxKEYCON1_COLVAL_MASK			(0xffffff << 0)
+#define WxKEYCON1_COLVAL_SHIFT			(0)
+#define WxKEYCON1_COLVAL_LIMIT			(0xffffff)
+#define WxKEYCON1_COLVAL(_x)			((_x) << 0)
+
+
+/* Window blanking (MAP) */
+
+#define WINxMAP_MAP				(1 << 24)
+#define WINxMAP_MAP_COLOUR_MASK			(0xffffff << 0)
+#define WINxMAP_MAP_COLOUR_SHIFT		(0)
+#define WINxMAP_MAP_COLOUR_LIMIT		(0xffffff)
+#define WINxMAP_MAP_COLOUR(_x)			((_x) << 0)
+
+#define WPALCON_PAL_UPDATE			(1 << 9)
+#define WPALCON_W1PAL_MASK			(0x7 << 3)
+#define WPALCON_W1PAL_SHIFT			(3)
+#define WPALCON_W1PAL_25BPP_A888		(0x0 << 3)
+#define WPALCON_W1PAL_24BPP			(0x1 << 3)
+#define WPALCON_W1PAL_19BPP_A666		(0x2 << 3)
+#define WPALCON_W1PAL_18BPP_A665		(0x3 << 3)
+#define WPALCON_W1PAL_18BPP			(0x4 << 3)
+#define WPALCON_W1PAL_16BPP_A555		(0x5 << 3)
+#define WPALCON_W1PAL_16BPP_565			(0x6 << 3)
+
+#define WPALCON_W0PAL_MASK			(0x7 << 0)
+#define WPALCON_W0PAL_SHIFT			(0)
+#define WPALCON_W0PAL_25BPP_A888		(0x0 << 0)
+#define WPALCON_W0PAL_24BPP			(0x1 << 0)
+#define WPALCON_W0PAL_19BPP_A666		(0x2 << 0)
+#define WPALCON_W0PAL_18BPP_A665		(0x3 << 0)
+#define WPALCON_W0PAL_18BPP			(0x4 << 0)
+#define WPALCON_W0PAL_16BPP_A555		(0x5 << 0)
+#define WPALCON_W0PAL_16BPP_565			(0x6 << 0)
+
diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/arch/arm/plat-s3c/include/plat/regs-iic.h
index 2f7c17de8ac8..2f7c17de8ac8 100644
--- a/include/asm-arm/plat-s3c/regs-iic.h
+++ b/arch/arm/plat-s3c/include/plat/regs-iic.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-irqtype.h b/arch/arm/plat-s3c/include/plat/regs-irqtype.h
new file mode 100644
index 000000000000..c63cd3fc5ad3
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-irqtype.h
@@ -0,0 +1,21 @@
+/* arch/arm/plat-s3c/include/plat/regs-irqtype.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C - IRQ detection types.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including
+ * the S3C64XX
+*/
+#define S3C2410_EXTINT_LOWLEV	 (0x00)
+#define S3C2410_EXTINT_HILEV	 (0x01)
+#define S3C2410_EXTINT_FALLEDGE	 (0x02)
+#define S3C2410_EXTINT_RISEEDGE	 (0x04)
+#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/arch/arm/plat-s3c/include/plat/regs-nand.h
index b2caa4bca270..b2caa4bca270 100644
--- a/include/asm-arm/plat-s3c/regs-nand.h
+++ b/arch/arm/plat-s3c/include/plat/regs-nand.h
diff --git a/include/asm-arm/plat-s3c/regs-rtc.h b/arch/arm/plat-s3c/include/plat/regs-rtc.h
index d5837cf8e402..d5837cf8e402 100644
--- a/include/asm-arm/plat-s3c/regs-rtc.h
+++ b/arch/arm/plat-s3c/include/plat/regs-rtc.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-sdhci.h b/arch/arm/plat-s3c/include/plat/regs-sdhci.h
new file mode 100644
index 000000000000..e34049ad44cc
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-sdhci.h
@@ -0,0 +1,87 @@
+/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - SDHCI (HSMMC) register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_SDHCI_REGS_H
+#define __PLAT_S3C_SDHCI_REGS_H __FILE__
+
+#define S3C_SDHCI_CONTROL2			(0x80)
+#define S3C_SDHCI_CONTROL3			(0x84)
+#define S3C64XX_SDHCI_CONTROL4			(0x8C)
+
+#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR	(1 << 31)
+#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK		(1 << 30)
+#define S3C_SDHCI_CTRL2_CDINVRXD3		(1 << 29)
+#define S3C_SDHCI_CTRL2_SLCARDOUT		(1 << 28)
+
+#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK		(0xf << 24)
+#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT		(24)
+#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x)		((_x) << 24)
+
+#define S3C_SDHCI_CTRL2_LVLDAT_MASK		(0xff << 16)
+#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT		(16)
+#define S3C_SDHCI_CTRL2_LVLDAT(_x)		((_x) << 16)
+
+#define S3C_SDHCI_CTRL2_ENFBCLKTX		(1 << 15)
+#define S3C_SDHCI_CTRL2_ENFBCLKRX		(1 << 14)
+#define S3C_SDHCI_CTRL2_SDCDSEL			(1 << 13)
+#define S3C_SDHCI_CTRL2_SDSIGPC			(1 << 12)
+#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART	(1 << 11)
+
+#define S3C_SDHCI_CTRL2_DFCNT_MASK		(0x3 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_SHIFT		(9)
+#define S3C_SDHCI_CTRL2_DFCNT_NONE		(0x0 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK		(0x1 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK		(0x2 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK		(0x3 << 9)
+
+#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD		(1 << 8)
+#define S3C_SDHCI_CTRL2_RWAITMODE		(1 << 7)
+#define S3C_SDHCI_CTRL2_DISBUFRD		(1 << 6)
+#define S3C_SDHCI_CTRL2_SELBASECLK_MASK		(0x3 << 4)
+#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT	(4)
+#define S3C_SDHCI_CTRL2_PWRSYNC			(1 << 3)
+#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON		(1 << 1)
+#define S3C_SDHCI_CTRL2_HWINITFIN		(1 << 0)
+
+#define S3C_SDHCI_CTRL3_FCSEL3			(1 << 31)
+#define S3C_SDHCI_CTRL3_FCSEL2			(1 << 23)
+#define S3C_SDHCI_CTRL3_FCSEL1			(1 << 15)
+#define S3C_SDHCI_CTRL3_FCSEL0			(1 << 7)
+
+#define S3C_SDHCI_CTRL3_FIA3_MASK		(0x7f << 24)
+#define S3C_SDHCI_CTRL3_FIA3_SHIFT		(24)
+#define S3C_SDHCI_CTRL3_FIA3(_x)		((_x) << 24)
+
+#define S3C_SDHCI_CTRL3_FIA2_MASK		(0x7f << 16)
+#define S3C_SDHCI_CTRL3_FIA2_SHIFT		(16)
+#define S3C_SDHCI_CTRL3_FIA2(_x)		((_x) << 16)
+
+#define S3C_SDHCI_CTRL3_FIA1_MASK		(0x7f << 8)
+#define S3C_SDHCI_CTRL3_FIA1_SHIFT		(8)
+#define S3C_SDHCI_CTRL3_FIA1(_x)		((_x) << 8)
+
+#define S3C_SDHCI_CTRL3_FIA0_MASK		(0x7f << 0)
+#define S3C_SDHCI_CTRL3_FIA0_SHIFT		(0)
+#define S3C_SDHCI_CTRL3_FIA0(_x)		((_x) << 0)
+
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK	(0x3 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT	(16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA	(0x0 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA	(0x1 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA	(0x2 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA	(0x3 << 16)
+
+#define S3C64XX_SDHCI_CONTROL4_BUSY		(1)
+
+#endif /* __PLAT_S3C_SDHCI_REGS_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index a0daa647b92c..487d7d2a7e1d 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -77,6 +77,12 @@
 #define S3C2440_UCON_FCLK	  (3<<10)
 #define S3C2443_UCON_EPLL	  (3<<10)
 
+#define S3C6400_UCON_CLKMASK	(3<<10)
+#define S3C6400_UCON_PCLK	(0<<10)
+#define S3C6400_UCON_PCLK2	(2<<10)
+#define S3C6400_UCON_UCLK0	(1<<10)
+#define S3C6400_UCON_UCLK1	(3<<10)
+
 #define S3C2440_UCON2_FCLK_EN	  (1<<15)
 #define S3C2440_UCON0_DIVMASK	  (15 << 12)
 #define S3C2440_UCON1_DIVMASK	  (15 << 12)
@@ -149,6 +155,14 @@
 #define S3C2410_UFSTAT_RXMASK	  (15<<0)
 #define S3C2410_UFSTAT_RXSHIFT	  (0)
 
+/* UFSTAT S3C24A0 */
+#define S3C24A0_UFSTAT_TXFULL	  (1 << 14)
+#define S3C24A0_UFSTAT_RXFULL	  (1 << 6)
+#define S3C24A0_UFSTAT_TXMASK	  (63 << 8)
+#define S3C24A0_UFSTAT_TXSHIFT	  (8)
+#define S3C24A0_UFSTAT_RXMASK	  (63)
+#define S3C24A0_UFSTAT_RXSHIFT	  (0)
+
 /* UFSTAT S3C2443 same as S3C2440 */
 #define S3C2440_UFSTAT_TXFULL	  (1<<14)
 #define S3C2440_UFSTAT_RXFULL	  (1<<6)
@@ -224,7 +238,7 @@ struct s3c2410_uartcfg {
  * or platform_add_device() before the console_initcall()
 */
 
-extern struct platform_device *s3c24xx_uart_devs[3];
+extern struct platform_device *s3c24xx_uart_devs[4];
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-s3c/include/plat/regs-timer.h
index cc0eedd53e38..d097d92f8cc7 100644
--- a/arch/arm/plat-s3c/include/plat/regs-timer.h
+++ b/arch/arm/plat-s3c/include/plat/regs-timer.h
@@ -10,7 +10,6 @@
  * S3C2410 Timer configuration
 */
 
-
 #ifndef __ASM_ARCH_REGS_TIMER_H
 #define __ASM_ARCH_REGS_TIMER_H
 
@@ -21,6 +20,8 @@
 #define S3C2410_TCFG1	      S3C_TIMERREG(0x04)
 #define S3C2410_TCON	      S3C_TIMERREG(0x08)
 
+#define S3C64XX_TINT_CSTAT    S3C_TIMERREG(0x44)
+
 #define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
 #define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
 #define S3C2410_TCFG_PRESCALER1_SHIFT (8)
@@ -72,6 +73,14 @@
 #define S3C2410_TCFG1_MUX_TCLK    (4<<0)
 #define S3C2410_TCFG1_MUX_MASK	  (15<<0)
 
+#define S3C64XX_TCFG1_MUX_DIV1	  (0<<0)
+#define S3C64XX_TCFG1_MUX_DIV2	  (1<<0)
+#define S3C64XX_TCFG1_MUX_DIV4	  (2<<0)
+#define S3C64XX_TCFG1_MUX_DIV8    (3<<0)
+#define S3C64XX_TCFG1_MUX_DIV16   (4<<0)
+#define S3C64XX_TCFG1_MUX_TCLK    (5<<0)  /* 3 sets of TCLK */
+#define S3C64XX_TCFG1_MUX_MASK	  (15<<0)
+
 #define S3C2410_TCFG1_SHIFT(x)	  ((x) * 4)
 
 /* for each timer, we have an count buffer, an compare buffer and
diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/arch/arm/plat-s3c/include/plat/regs-watchdog.h
index 4938492470f7..4938492470f7 100644
--- a/include/asm-arm/plat-s3c/regs-watchdog.h
+++ b/arch/arm/plat-s3c/include/plat/regs-watchdog.h
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
new file mode 100644
index 000000000000..c4ca3920ca4b
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -0,0 +1,108 @@
+/* linux/arch/arm/plat-s3c/include/plat/sdhci.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - SDHCI (HSMMC) platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_SDHCI_H
+#define __PLAT_S3C_SDHCI_H __FILE__
+
+struct platform_device;
+struct mmc_host;
+struct mmc_card;
+struct mmc_ios;
+
+/**
+ * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
+ * @max_width: The maximum number of data bits supported.
+ * @host_caps: Standard MMC host capabilities bit field.
+ * @cfg_gpio: Configure the GPIO for a specific card bit-width
+ * @cfg_card: Configure the interface for a specific card and speed. This
+ *            is necessary the controllers and/or GPIO blocks require the
+ *	      changing of driver-strength and other controls dependant on
+ *	      the card and speed of operation.
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio or
+ * card speed information.
+*/
+struct s3c_sdhci_platdata {
+	unsigned int	max_width;
+	unsigned int	host_caps;
+
+	char		**clocks;	/* set of clock sources */
+
+	void	(*cfg_gpio)(struct platform_device *dev, int width);
+	void	(*cfg_card)(struct platform_device *dev,
+			    void __iomem *regbase,
+			    struct mmc_ios *ios,
+			    struct mmc_card *card);
+};
+
+/**
+ * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use withe S3C SDHCI device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
+
+/* Default platform data, exported so that per-cpu initialisation can
+ * set the correct one when there are more than one cpu type selected.
+*/
+
+extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
+
+/* Helper function availablity */
+
+#ifdef CONFIG_S3C6410_SETUP_SDHCI
+extern char *s3c6410_hsmmc_clksrcs[4];
+
+extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+
+extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
+					   void __iomem *r,
+					   struct mmc_ios *ios,
+					   struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s3c6410_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s3c6410_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#else
+static inline void s3c6410_default_sdhci0(void) { }
+static inline void s3c6410_default_sdhci1(void) { }
+#endif /* CONFIG_S3C6410_SETUP_SDHCI */
+
+#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h
index 4df006b9cc10..6061de87f225 100644
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-s3c/include/plat/uncompress.h
@@ -28,7 +28,7 @@ static void arch_detect_cpu(void);
 /* defines for UART registers */
 
 #include <plat/regs-serial.h>
-#include <asm/plat-s3c/regs-watchdog.h>
+#include <plat/regs-watchdog.h>
 
 /* working in physical space... */
 #undef S3C2410_WDOGREG
@@ -37,7 +37,7 @@ static void arch_detect_cpu(void);
 /* how many bytes we allow into the FIFO at a time in FIFO mode */
 #define FIFO_MAX	 (14)
 
-#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT)
+#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
 
 static __inline__ void
 uart_wr(unsigned int reg, unsigned int val)
@@ -139,6 +139,28 @@ static void arch_decomp_error(const char *x)
 
 static void error(char *err);
 
+#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
+static inline void arch_enable_uart_fifo(void)
+{
+	u32 fifocon = uart_rd(S3C2410_UFCON);
+
+	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
+		fifocon |= S3C2410_UFCON_RESETBOTH;
+		uart_wr(S3C2410_UFCON, fifocon);
+
+		/* wait for fifo reset to complete */
+		while (1) {
+			fifocon = uart_rd(S3C2410_UFCON);
+			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
+				break;
+		}
+	}
+}
+#else
+#define arch_enable_uart_fifo() do { } while(0)
+#endif
+
+
 static void
 arch_decomp_setup(void)
 {
@@ -149,6 +171,12 @@ arch_decomp_setup(void)
 
 	arch_detect_cpu();
 	arch_decomp_wdog_start();
+
+	/* Enable the UART FIFOs if they where not enabled and our
+	 * configuration says we should turn them on.
+	 */
+
+	arch_enable_uart_fifo();
 }
 
 
diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-s3c/init.c
new file mode 100644
index 000000000000..6790edfaca6f
--- /dev/null
+++ b/arch/arm/plat-s3c/init.c
@@ -0,0 +1,160 @@
+/* linux/arch/arm/plat-s3c/init.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series CPU initialisation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/regs-serial.h>
+
+static struct cpu_table *cpu;
+
+static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
+						struct cpu_table *tab,
+						unsigned int count)
+{
+	for (; count != 0; count--, tab++) {
+		if ((idcode & tab->idmask) == tab->idcode)
+			return tab;
+	}
+
+	return NULL;
+}
+
+void __init s3c_init_cpu(unsigned long idcode,
+			 struct cpu_table *cputab, unsigned int cputab_size)
+{
+	cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
+
+	if (cpu == NULL) {
+		printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
+		panic("Unknown S3C24XX CPU");
+	}
+
+	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+
+	if (cpu->map_io == NULL || cpu->init == NULL) {
+		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
+		panic("Unsupported Samsung CPU");
+	}
+
+	cpu->map_io();
+}
+
+/* s3c24xx_init_clocks
+ *
+ * Initialise the clock subsystem and associated information from the
+ * given master crystal value.
+ *
+ * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
+ *      != 0 -> PLL crystal value in Hz
+*/
+
+void __init s3c24xx_init_clocks(int xtal)
+{
+	if (xtal == 0)
+		xtal = 12*1000*1000;
+
+	if (cpu == NULL)
+		panic("s3c24xx_init_clocks: no cpu setup?\n");
+
+	if (cpu->init_clocks == NULL)
+		panic("s3c24xx_init_clocks: cpu has no clock init\n");
+	else
+		(cpu->init_clocks)(xtal);
+}
+
+/* uart management */
+
+static int nr_uarts __initdata = 0;
+
+static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+/* s3c24xx_init_uartdevs
+ *
+ * copy the specified platform data and configuration into our central
+ * set of devices, before the data is thrown away after the init process.
+ *
+ * This also fills in the array passed to the serial driver for the
+ * early initialisation of the console.
+*/
+
+void __init s3c24xx_init_uartdevs(char *name,
+				  struct s3c24xx_uart_resources *res,
+				  struct s3c2410_uartcfg *cfg, int no)
+{
+	struct platform_device *platdev;
+	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
+	struct s3c24xx_uart_resources *resp;
+	int uart;
+
+	memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
+
+	for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
+		platdev = s3c24xx_uart_src[cfgptr->hwport];
+
+		resp = res + cfgptr->hwport;
+
+		s3c24xx_uart_devs[uart] = platdev;
+
+		platdev->name = name;
+		platdev->resource = resp->resources;
+		platdev->num_resources = resp->nr_resources;
+
+		platdev->dev.platform_data = cfgptr;
+	}
+
+	nr_uarts = no;
+}
+
+void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	if (cpu == NULL)
+		return;
+
+	if (cpu->init_uarts == NULL) {
+		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
+	} else
+		(cpu->init_uarts)(cfg, no);
+}
+
+static int __init s3c_arch_init(void)
+{
+	int ret;
+
+	// do the correct init for cpu
+
+	if (cpu == NULL)
+		panic("s3c_arch_init: NULL cpu\n");
+
+	ret = (cpu->init)();
+	if (ret != 0)
+		return ret;
+
+	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
+	return ret;
+}
+
+arch_initcall(s3c_arch_init);
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c/pwm-clock.c
index 3fad68a1e6bc..a318215ab535 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c/pwm-clock.c
@@ -14,20 +14,20 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/errno.h>
+#include <linux/log2.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/map.h>
 #include <asm/irq.h>
 
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
 #include <plat/clock.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-timer.h>
+#include <mach/pwm-clock.h>
 
 /* Each of the timers 0 through 5 go through the following
  * clock tree, with the inputs depending on the timers.
@@ -73,11 +73,13 @@
  * tclk -------------------------/
 */
 
-static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
+static struct clk clk_timer_scaler[];
+
+static unsigned long clk_pwm_scaler_get_rate(struct clk *clk)
 {
 	unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
 
-	if (clk->id == 1) {
+	if (clk == &clk_timer_scaler[1]) {
 		tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
 		tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
 	} else {
@@ -87,18 +89,61 @@ static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
 	return clk_get_rate(clk->parent) / (tcfg0 + 1);
 }
 
-/* TODO - add set rate calls. */
+static unsigned long clk_pwm_scaler_round_rate(struct clk *clk,
+					       unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long divisor = parent_rate / rate;
+
+	if (divisor > 256)
+		divisor = 256;
+	else if (divisor < 2)
+		divisor = 2;
+
+	return parent_rate / divisor;
+}
+
+static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long round = clk_pwm_scaler_round_rate(clk, rate);
+	unsigned long tcfg0;
+	unsigned long divisor;
+	unsigned long flags;
+
+	divisor = clk_get_rate(clk->parent) / round;
+	divisor--;
+
+	local_irq_save(flags);
+	tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+	if (clk == &clk_timer_scaler[1]) {
+		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
+		tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT;
+	} else {
+		tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
+		tcfg0 |= divisor;
+	}
+
+	__raw_writel(tcfg0, S3C2410_TCFG0);
+	local_irq_restore(flags);
+
+	return 0;
+}
 
 static struct clk clk_timer_scaler[] = {
 	[0]	= {
 		.name		= "pwm-scaler0",
 		.id		= -1,
-		.get_rate	= clk_pwm_scaler_getrate,
+		.get_rate	= clk_pwm_scaler_get_rate,
+		.set_rate	= clk_pwm_scaler_set_rate,
+		.round_rate	= clk_pwm_scaler_round_rate,
 	},
 	[1]	= {
 		.name		= "pwm-scaler1",
 		.id		= -1,
-		.get_rate	= clk_pwm_scaler_getrate,
+		.get_rate	= clk_pwm_scaler_get_rate,
+		.set_rate	= clk_pwm_scaler_set_rate,
+		.round_rate	= clk_pwm_scaler_round_rate,
 	},
 };
 
@@ -123,11 +168,6 @@ static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
 	return container_of(clk, struct pwm_tdiv_clk, clk);
 }
 
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << (1 + tcfg1);
-}
-
 static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
 {
 	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
@@ -136,7 +176,7 @@ static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
 	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
 	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
 
-	if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+	if (pwm_cfg_src_is_tclk(tcfg1))
 		divisor = to_tdiv(clk)->divisor;
 	else
 		divisor = tcfg_to_divisor(tcfg1);
@@ -153,7 +193,9 @@ static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
 	parent_rate = clk_get_rate(clk->parent);
 	divisor = parent_rate / rate;
 
-	if (divisor <= 2)
+	if (divisor <= 1 && pwm_tdiv_has_div1())
+		divisor = 1;
+	else if (divisor <= 2)
 		divisor = 2;
 	else if (divisor <= 4)
 		divisor = 4;
@@ -167,25 +209,7 @@ static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
 
 static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
 {
-	unsigned long bits;
-
-	switch (divclk->divisor) {
-	case 2:
-		bits = S3C2410_TCFG1_MUX_DIV2;
-		break;
-	case 4:
-		bits = S3C2410_TCFG1_MUX_DIV4;
-		break;
-	case 8:
-		bits = S3C2410_TCFG1_MUX_DIV8;
-		break;
-	case 16:
-	default:
-		bits = S3C2410_TCFG1_MUX_DIV16;
-		break;
-	}
-
-	return bits;
+	return pwm_tdiv_div_bits(divclk->divisor);
 }
 
 static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
@@ -226,7 +250,7 @@ static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
 	/* Update the current MUX settings if we are currently
 	 * selected as the clock source for this clock. */
 
-	if (tcfg1 != S3C2410_TCFG1_MUX_TCLK)
+	if (!pwm_cfg_src_is_tclk(tcfg1))
 		clk_pwm_tdiv_update(divclk);
 
 	return 0;
@@ -313,7 +337,7 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
 	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
 
 	if (parent == s3c24xx_pwmclk_tclk(id))
-		bits = S3C2410_TCFG1_MUX_TCLK << shift;
+		bits = S3C_TCFG1_MUX_TCLK << shift;
 	else if (parent == s3c24xx_pwmclk_tdiv(id))
 		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
 	else
@@ -375,7 +399,7 @@ static __init int clk_pwm_tin_register(struct clk *pwm)
 	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
 	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
 
-	if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+	if (pwm_cfg_src_is_tclk(tcfg1))
 		parent = s3c24xx_pwmclk_tclk(id);
 	else
 		parent = s3c24xx_pwmclk_tdiv(id);
@@ -383,7 +407,16 @@ static __init int clk_pwm_tin_register(struct clk *pwm)
 	return clk_set_parent(pwm, parent);
 }
 
-static __init int s3c24xx_pwmclk_init(void)
+/**
+ * s3c_pwmclk_init() - initialise pwm clocks
+ *
+ * Initialise and register the clocks which provide the inputs for the
+ * pwm timer blocks.
+ *
+ * Note, this call is required by the time core, so must be called after
+ * the base clocks are added and before any of the initcalls are run.
+ */
+__init void s3c_pwmclk_init(void)
 {
 	struct clk *clk_timers;
 	unsigned int clk;
@@ -392,7 +425,7 @@ static __init int s3c24xx_pwmclk_init(void)
 	clk_timers = clk_get(NULL, "timers");
 	if (IS_ERR(clk_timers)) {
 		printk(KERN_ERR "%s: no parent clock\n", __func__);
-		return -EINVAL;
+		return;
 	}
 
 	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
@@ -400,7 +433,7 @@ static __init int s3c24xx_pwmclk_init(void)
 		ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
 		if (ret < 0) {
 			printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
-			goto err;
+			return;
 		}
 	}
 
@@ -408,7 +441,7 @@ static __init int s3c24xx_pwmclk_init(void)
 		ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
 		if (ret < 0) {
 			printk(KERN_ERR "error adding pww tclk%d\n", clk);
-			goto err;
+			return;
 		}
 	}
 
@@ -416,7 +449,7 @@ static __init int s3c24xx_pwmclk_init(void)
 		ret = clk_pwm_tdiv_register(clk);
 		if (ret < 0) {
 			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
-			goto err;
+			return;
 		}
 	}
 
@@ -424,14 +457,7 @@ static __init int s3c24xx_pwmclk_init(void)
 		ret = clk_pwm_tin_register(&clk_tin[clk]);
 		if (ret < 0) {
 			printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
-			goto err;
+			return;
 		}
 	}
-
-	return 0;
-
- err:
-	return ret;
 }
-
-arch_initcall(s3c24xx_pwmclk_init);
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c/time.c
index c51916236ac0..3b27b29da478 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c/time.c
@@ -26,6 +26,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/leds.h>
@@ -36,6 +37,7 @@
 #include <plat/regs-timer.h>
 #include <mach/regs-irq.h>
 #include <asm/mach/time.h>
+#include <mach/tick.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
@@ -43,6 +45,10 @@
 static unsigned long timer_startval;
 static unsigned long timer_usec_ticks;
 
+#ifndef TICK_MAX
+#define TICK_MAX (0xffff)
+#endif
+
 #define TIMER_USEC_SHIFT 16
 
 /* we use the shifted arithmetic to work out the ratio of timer ticks
@@ -91,23 +97,19 @@ static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
  * IRQs are disabled before entering here from do_gettimeofday()
  */
 
-#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
-
 static unsigned long s3c2410_gettimeoffset (void)
 {
 	unsigned long tdone;
-	unsigned long irqpend;
 	unsigned long tval;
 
 	/* work out how many ticks have gone since last timer interrupt */
 
-        tval =  __raw_readl(S3C2410_TCNTO(4));
+	tval =  __raw_readl(S3C2410_TCNTO(4));
 	tdone = timer_startval - tval;
 
 	/* check to see if there is an interrupt pending */
 
-	irqpend = __raw_readl(S3C2410_SRCPND);
-	if (irqpend & SRCPND_TIMER4) {
+	if (s3c24xx_ostimer_pending()) {
 		/* re-read the timer, and try and fix up for the missed
 		 * interrupt. Note, the interrupt may go off before the
 		 * timer has re-loaded from wrapping.
@@ -144,7 +146,11 @@ static struct irqaction s3c2410_timer_irq = {
 	machine_is_bast()	|| \
 	machine_is_vr1000()	|| \
 	machine_is_anubis()	|| \
-	machine_is_osiris() )
+	machine_is_osiris())
+
+static struct clk *tin;
+static struct clk *tdiv;
+static struct clk *timerclk;
 
 /*
  * Set up timer interrupt, and return the current time in seconds.
@@ -159,13 +165,7 @@ static void s3c2410_timer_setup (void)
 	unsigned long tcfg1;
 	unsigned long tcfg0;
 
-	tcnt = 0xffff;  /* default value for tcnt */
-
-	/* read the current timer configuration bits */
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg0 = __raw_readl(S3C2410_TCFG0);
+	tcnt = TICK_MAX;  /* default value for tcnt */
 
 	/* configure the system for whichever machine is in use */
 
@@ -174,11 +174,13 @@ static void s3c2410_timer_setup (void)
 		timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
 		tcnt = 12000000 / HZ;
 
+		tcfg1 = __raw_readl(S3C2410_TCFG1);
 		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
 		tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
+		__raw_writel(tcfg1, S3C2410_TCFG1);
 	} else {
 		unsigned long pclk;
-		struct clk *clk;
+		struct clk *tscaler;
 
 		/* for the h1940 (and others), we use the pclk from the core
 		 * to generate the timer values. since values around 50 to
@@ -189,38 +191,34 @@ static void s3c2410_timer_setup (void)
 		 * (8.45 ticks per usec)
 		 */
 
-		/* this is used as default if no other timer can be found */
-
-		clk = clk_get(NULL, "timers");
-		if (IS_ERR(clk))
-			panic("failed to get clock for system timer");
-
-		clk_enable(clk);
-
-		pclk = clk_get_rate(clk);
+		pclk = clk_get_rate(timerclk);
 
 		/* configure clock tick */
 
 		timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
 
-		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
-		tcfg1 |= S3C2410_TCFG1_MUX4_DIV2;
+		tscaler = clk_get_parent(tdiv);
 
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 |= ((6 - 1) / 2) << S3C2410_TCFG_PRESCALER1_SHIFT;
+		clk_set_rate(tscaler, pclk / 3);
+		clk_set_rate(tdiv, pclk / 6);
+		clk_set_parent(tin, tdiv);
 
-		tcnt = (pclk / 6) / HZ;
+		tcnt = clk_get_rate(tin) / HZ;
 	}
 
+	tcon = __raw_readl(S3C2410_TCON);
+	tcfg0 = __raw_readl(S3C2410_TCFG0);
+	tcfg1 = __raw_readl(S3C2410_TCFG1);
+
 	/* timers reload after counting zero, so reduce the count by 1 */
 
 	tcnt--;
 
-	printk("timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
+	printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
 	       tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
 
 	/* check to see if timer is within 16bit range... */
-	if (tcnt > 0xffff) {
+	if (tcnt > TICK_MAX) {
 		panic("setup_timer: HZ is too small, cannot configure timer!");
 		return;
 	}
@@ -247,8 +245,35 @@ static void s3c2410_timer_setup (void)
 	__raw_writel(tcon, S3C2410_TCON);
 }
 
-static void __init s3c2410_timer_init (void)
+static void __init s3c2410_timer_resources(void)
+{
+	struct platform_device tmpdev;
+
+	tmpdev.dev.bus = &platform_bus_type;
+	tmpdev.id = 4;
+
+	timerclk = clk_get(NULL, "timers");
+	if (IS_ERR(timerclk))
+		panic("failed to get clock for system timer");
+
+	clk_enable(timerclk);
+
+	if (!use_tclk1_12()) {
+		tin = clk_get(&tmpdev.dev, "pwm-tin");
+		if (IS_ERR(tin))
+			panic("failed to get pwm-tin clock for system timer");
+
+		tdiv = clk_get(&tmpdev.dev, "pwm-tdiv");
+		if (IS_ERR(tdiv))
+			panic("failed to get pwm-tdiv clock for system timer");
+	}
+
+	clk_enable(tin);
+}
+
+static void __init s3c2410_timer_init(void)
 {
+	s3c2410_timer_resources();
 	s3c2410_timer_setup();
 	setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
 }
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 0af3872fb763..2c8a2f5d75ff 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -6,8 +6,8 @@
 
 config PLAT_S3C24XX
 	bool
-	depends on ARCH_S3C2410
-	default y if ARCH_S3C2410
+	depends on ARCH_S3C2410 || ARCH_S3C24A0
+	default y
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	help
@@ -15,6 +15,19 @@ config PLAT_S3C24XX
 
 if PLAT_S3C24XX
 
+# code that is shared between a number of the s3c24xx implementations
+
+config S3C2410_CLOCK
+	bool
+	help
+	  Clock code for the S3C2410, and similar processors which
+	  is currently includes the S3C2410, S3C2440, S3C2442.
+
+config S3C24XX_DCLK
+	bool
+	help
+	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
+
 config CPU_S3C244X
 	bool
 	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
@@ -28,6 +41,27 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system.
 
+
+# gpio configurations
+
+config S3C24XX_GPIO_EXTRA
+	int
+	default 128 if S3C24XX_GPIO_EXTRA128
+	default 64 if S3C24XX_GPIO_EXTRA64
+	default 0
+
+config S3C24XX_GPIO_EXTRA64
+	bool
+	help
+	  Add an extra 64 gpio numbers to the available GPIO pool. This is
+	  available for boards that need extra gpios for external devices.
+
+config S3C24XX_GPIO_EXTRA128
+	bool
+	help
+	  Add an extra 128 gpio numbers to the available GPIO pool. This is
+	  available for boards that need extra gpios for external devices.
+
 config PM_SIMTEC
 	bool
 	help
@@ -49,6 +83,29 @@ config S3C2410_DMA_DEBUG
 	  Enable debugging output for the DMA code. This option sends info
 	  to the kernel log, at priority KERN_DEBUG.
 
+config S3C24XX_ADC
+	bool "ADC common driver support"
+	help
+	  Core support for the ADC block found in the S3C24XX SoC systems
+	  for drivers such as the touchscreen and hwmon to use to share
+	  this resource.
+
+# SPI default pin configuration code
+
+config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13
+	bool
+	help
+	  SPI GPIO configuration code for BUS0 when connected to
+	  GPE11, GPE12 and GPE13.
+
+config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
+	bool
+	help
+	  SPI GPIO configuration code for BUS 1 when connected to
+	  GPG5, GPG6 and GPG7.
+
+# common code for s3c24xx based machines, such as the SMDKs.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index d82767b2b833..1e0767b266b8 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -17,9 +17,8 @@ obj-y				+= irq.o
 obj-y				+= devs.o
 obj-y				+= gpio.o
 obj-y				+= gpiolib.o
-obj-y				+= time.o
 obj-y				+= clock.o
-obj-y				+= pwm-clock.o
+obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
 # Architecture dependant builds
 
@@ -30,5 +29,18 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= sleep.o
 obj-$(CONFIG_HAVE_PWM)		+= pwm.o
+obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
+obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
+
+# device specific setup and/or initialisation
+obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
+
+# SPI gpio central GPIO functions
+
+obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7)    += spi-bus1-gpg5_6_7.o
+
+# machine common support
+
 obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
new file mode 100644
index 000000000000..9a5c767e0a42
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -0,0 +1,372 @@
+/* arch/arm/plat-s3c24xx/adc.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * S3C24XX ADC device core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <plat/regs-adc.h>
+#include <plat/adc.h>
+
+/* This driver is designed to control the usage of the ADC block between
+ * the touchscreen and any other drivers that may need to use it, such as
+ * the hwmon driver.
+ *
+ * Priority will be given to the touchscreen driver, but as this itself is
+ * rate limited it should not starve other requests which are processed in
+ * order that they are received.
+ *
+ * Each user registers to get a client block which uniquely identifies it
+ * and stores information such as the necessary functions to callback when
+ * action is required.
+ */
+
+struct s3c_adc_client {
+	struct platform_device	*pdev;
+	struct list_head	 pend;
+
+	unsigned int		 nr_samples;
+	unsigned char		 is_ts;
+	unsigned char		 channel;
+
+	void	(*select_cb)(unsigned selected);
+	void	(*convert_cb)(unsigned val1, unsigned val2);
+};
+
+struct adc_device {
+	struct platform_device	*pdev;
+	struct platform_device	*owner;
+	struct clk		*clk;
+	struct s3c_adc_client	*cur;
+	struct s3c_adc_client	*ts_pend;
+	void __iomem		*regs;
+
+	unsigned int		 prescale;
+
+	int			 irq;
+};
+
+static struct adc_device *adc_dev;
+
+static LIST_HEAD(adc_pending);
+
+#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
+
+static inline void s3c_adc_convert(struct adc_device *adc)
+{
+	unsigned con = readl(adc->regs + S3C2410_ADCCON);
+
+	con |= S3C2410_ADCCON_ENABLE_START;
+	writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static inline void s3c_adc_select(struct adc_device *adc,
+				  struct s3c_adc_client *client)
+{
+	unsigned con = readl(adc->regs + S3C2410_ADCCON);
+
+	client->select_cb(1);
+
+	con &= ~S3C2410_ADCCON_MUXMASK;
+	con &= ~S3C2410_ADCCON_STDBM;
+	con &= ~S3C2410_ADCCON_STARTMASK;
+
+	if (!client->is_ts)
+		con |= S3C2410_ADCCON_SELMUX(client->channel);
+
+	writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static void s3c_adc_dbgshow(struct adc_device *adc)
+{
+	adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
+		readl(adc->regs + S3C2410_ADCCON),
+		readl(adc->regs + S3C2410_ADCTSC),
+		readl(adc->regs + S3C2410_ADCDLY));
+}
+
+void s3c_adc_try(struct adc_device *adc)
+{
+	struct s3c_adc_client *next = adc->ts_pend;
+
+	if (!next && !list_empty(&adc_pending)) {
+		next = list_first_entry(&adc_pending,
+					struct s3c_adc_client, pend);
+		list_del(&next->pend);
+	} else
+		adc->ts_pend = NULL;
+
+	if (next) {
+		adc_dbg(adc, "new client is %p\n", next);
+		adc->cur = next;
+		s3c_adc_select(adc, next);
+		s3c_adc_convert(adc);
+		s3c_adc_dbgshow(adc);
+	}
+}
+
+int s3c_adc_start(struct s3c_adc_client *client,
+		  unsigned int channel, unsigned int nr_samples)
+{
+	struct adc_device *adc = adc_dev;
+	unsigned long flags;
+
+	if (!adc) {
+		printk(KERN_ERR "%s: failed to find adc\n", __func__);
+		return -EINVAL;
+	}
+
+	if (client->is_ts && adc->ts_pend)
+		return -EAGAIN;
+
+	local_irq_save(flags);
+
+	client->channel = channel;
+	client->nr_samples = nr_samples;
+
+	if (client->is_ts)
+		adc->ts_pend = client;
+	else
+		list_add_tail(&client->pend, &adc_pending);
+
+	if (!adc->cur)
+		s3c_adc_try(adc);
+	local_irq_restore(flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_start);
+
+static void s3c_adc_default_select(unsigned select)
+{
+}
+
+struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
+					void (*select)(unsigned int selected),
+					void (*conv)(unsigned d0, unsigned d1),
+					unsigned int is_ts)
+{
+	struct s3c_adc_client *client;
+
+	WARN_ON(!pdev);
+	WARN_ON(!conv);
+
+	if (!select)
+		select = s3c_adc_default_select;
+
+	if (!conv || !pdev)
+		return ERR_PTR(-EINVAL);
+
+	client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
+	if (!client) {
+		dev_err(&pdev->dev, "no memory for adc client\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	client->pdev = pdev;
+	client->is_ts = is_ts;
+	client->select_cb = select;
+	client->convert_cb = conv;
+
+	return client;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_register);
+
+void s3c_adc_release(struct s3c_adc_client *client)
+{
+	/* We should really check that nothing is in progress. */
+	kfree(client);
+}
+EXPORT_SYMBOL_GPL(s3c_adc_release);
+
+static irqreturn_t s3c_adc_irq(int irq, void *pw)
+{
+	struct adc_device *adc = pw;
+	struct s3c_adc_client *client = adc->cur;
+	unsigned long flags;
+	unsigned data0, data1;
+
+	if (!client) {
+		dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
+		return IRQ_HANDLED;
+	}
+
+	data0 = readl(adc->regs + S3C2410_ADCDAT0);
+	data1 = readl(adc->regs + S3C2410_ADCDAT1);
+	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
+
+	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff);
+
+	if (--client->nr_samples > 0) {
+		/* fire another conversion for this */
+
+		client->select_cb(1);
+		s3c_adc_convert(adc);
+	} else {
+		local_irq_save(flags);
+		(client->select_cb)(0);
+		adc->cur = NULL;
+
+		s3c_adc_try(adc);
+		local_irq_restore(flags);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int s3c_adc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct adc_device *adc;
+	struct resource *regs;
+	int ret;
+
+	adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL);
+	if (adc == NULL) {
+		dev_err(dev, "failed to allocate adc_device\n");
+		return -ENOMEM;
+	}
+
+	adc->pdev = pdev;
+	adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+
+	adc->irq = platform_get_irq(pdev, 1);
+	if (adc->irq <= 0) {
+		dev_err(dev, "failed to get adc irq\n");
+		ret = -ENOENT;
+		goto err_alloc;
+	}
+
+	ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc);
+	if (ret < 0) {
+		dev_err(dev, "failed to attach adc irq\n");
+		goto err_alloc;
+	}
+
+	adc->clk = clk_get(dev, "adc");
+	if (IS_ERR(adc->clk)) {
+		dev_err(dev, "failed to get adc clock\n");
+		ret = PTR_ERR(adc->clk);
+		goto err_irq;
+	}
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs) {
+		dev_err(dev, "failed to find registers\n");
+		ret = -ENXIO;
+		goto err_clk;
+	}
+
+	adc->regs = ioremap(regs->start, resource_size(regs));
+	if (!adc->regs) {
+		dev_err(dev, "failed to map registers\n");
+		ret = -ENXIO;
+		goto err_clk;
+	}
+
+	clk_enable(adc->clk);
+
+	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
+	       adc->regs + S3C2410_ADCCON);
+
+	dev_info(dev, "attached adc driver\n");
+
+	platform_set_drvdata(pdev, adc);
+	adc_dev = adc;
+
+	return 0;
+
+ err_clk:
+	clk_put(adc->clk);
+
+ err_irq:
+	free_irq(adc->irq, adc);
+
+ err_alloc:
+	kfree(adc);
+	return ret;
+}
+
+static int s3c_adc_remove(struct platform_device *pdev)
+{
+	struct adc_device *adc = platform_get_drvdata(pdev);
+
+	iounmap(adc->regs);
+	free_irq(adc->irq, adc);
+	clk_disable(adc->clk);
+	clk_put(adc->clk);
+	kfree(adc);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct adc_device *adc = platform_get_drvdata(pdev);
+	u32 con;
+
+	con = readl(adc->regs + S3C2410_ADCCON);
+	con |= S3C2410_ADCCON_STDBM;
+	writel(con, adc->regs + S3C2410_ADCCON);
+
+	clk_disable(adc->clk);
+
+	return 0;
+}
+
+static int s3c_adc_resume(struct platform_device *pdev)
+{
+	struct adc_device *adc = platform_get_drvdata(pdev);
+
+	clk_enable(adc->clk);
+
+	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
+	       adc->regs + S3C2410_ADCCON);
+
+	return 0;
+}
+
+#else
+#define s3c_adc_suspend NULL
+#define s3c_adc_resume NULL
+#endif
+
+static struct platform_driver s3c_adc_driver = {
+	.driver		= {
+		.name	= "s3c24xx-adc",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= s3c_adc_probe,
+	.remove		= __devexit_p(s3c_adc_remove),
+	.suspend	= s3c_adc_suspend,
+	.resume		= s3c_adc_resume,
+};
+
+static int __init adc_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&s3c_adc_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
+
+	return ret;
+}
+
+arch_initcall(adc_init);
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
new file mode 100644
index 000000000000..5b75a797b5ab
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -0,0 +1,194 @@
+/* linux/arch/arm/plat-s3c24xx/clock-dclk.c
+ *
+ * Copyright (c) 2004,2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24XX - definitions for DCLK and CLKOUT registers
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+/* clocks that could be registered by external code */
+
+static int s3c24xx_dclk_enable(struct clk *clk, int enable)
+{
+	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+	if (enable)
+		dclkcon |= clk->ctrlbit;
+	else
+		dclkcon &= ~clk->ctrlbit;
+
+	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+	return 0;
+}
+
+static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
+{
+	unsigned long dclkcon;
+	unsigned int uclk;
+
+	if (parent == &clk_upll)
+		uclk = 1;
+	else if (parent == &clk_p)
+		uclk = 0;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
+		if (uclk)
+			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
+		else
+			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
+	} else {
+		if (uclk)
+			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
+		else
+			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
+	}
+
+	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+	return 0;
+}
+static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
+{
+	unsigned long div;
+
+	if ((rate == 0) || !clk->parent)
+		return 0;
+
+	div = clk_get_rate(clk->parent) / rate;
+	if (div < 2)
+		div = 2;
+	else if (div > 16)
+		div = 16;
+
+	return div;
+}
+
+static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
+	unsigned long rate)
+{
+	unsigned long div = s3c24xx_calc_div(clk, rate);
+
+	if (div == 0)
+		return 0;
+
+	return clk_get_rate(clk->parent) / div;
+}
+
+static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
+
+	if (div == 0)
+		return -EINVAL;
+
+	if (clk == &s3c24xx_dclk0) {
+		mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
+			S3C2410_DCLKCON_DCLK0_CMP_MASK;
+		data = S3C2410_DCLKCON_DCLK0_DIV(div) |
+			S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
+	} else if (clk == &s3c24xx_dclk1) {
+		mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
+			S3C2410_DCLKCON_DCLK1_CMP_MASK;
+		data = S3C2410_DCLKCON_DCLK1_DIV(div) |
+			S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
+	} else
+		return -EINVAL;
+
+	clk->rate = clk_get_rate(clk->parent) / div;
+	__raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
+		S3C24XX_DCLKCON);
+	return clk->rate;
+}
+static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
+{
+	unsigned long mask;
+	unsigned long source;
+
+	/* calculate the MISCCR setting for the clock */
+
+	if (parent == &clk_xtal)
+		source = S3C2410_MISCCR_CLK0_MPLL;
+	else if (parent == &clk_upll)
+		source = S3C2410_MISCCR_CLK0_UPLL;
+	else if (parent == &clk_f)
+		source = S3C2410_MISCCR_CLK0_FCLK;
+	else if (parent == &clk_h)
+		source = S3C2410_MISCCR_CLK0_HCLK;
+	else if (parent == &clk_p)
+		source = S3C2410_MISCCR_CLK0_PCLK;
+	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
+		source = S3C2410_MISCCR_CLK0_DCLK0;
+	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
+		source = S3C2410_MISCCR_CLK0_DCLK0;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	if (clk == &s3c24xx_clkout0)
+		mask = S3C2410_MISCCR_CLK0_MASK;
+	else {
+		source <<= 4;
+		mask = S3C2410_MISCCR_CLK1_MASK;
+	}
+
+	s3c2410_modify_misccr(mask, source);
+	return 0;
+}
+
+/* external clock definitions */
+
+struct clk s3c24xx_dclk0 = {
+	.name		= "dclk0",
+	.id		= -1,
+	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
+	.enable	        = s3c24xx_dclk_enable,
+	.set_parent	= s3c24xx_dclk_setparent,
+	.set_rate	= s3c24xx_set_dclk_rate,
+	.round_rate	= s3c24xx_round_dclk_rate,
+};
+
+struct clk s3c24xx_dclk1 = {
+	.name		= "dclk1",
+	.id		= -1,
+	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
+	.enable		= s3c24xx_dclk_enable,
+	.set_parent	= s3c24xx_dclk_setparent,
+	.set_rate	= s3c24xx_set_dclk_rate,
+	.round_rate	= s3c24xx_round_dclk_rate,
+};
+
+struct clk s3c24xx_clkout0 = {
+	.name		= "clkout0",
+	.id		= -1,
+	.set_parent	= s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_clkout1 = {
+	.name		= "clkout1",
+	.id		= -1,
+	.set_parent	= s3c24xx_clkout_setparent,
+};
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index a005ddbd9ef3..8474d05274bd 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -27,18 +27,8 @@
 */
 
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
 #include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -47,490 +37,23 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
+#include <plat/cpu-freq.h>
+
 #include <plat/clock.h>
 #include <plat/cpu.h>
-
-/* clock information */
-
-static LIST_HEAD(clocks);
-
-DEFINE_MUTEX(clocks_mutex);
-
-/* enable and disable calls for use with the clk struct */
-
-static int clk_null_enable(struct clk *clk, int enable)
-{
-	return 0;
-}
-
-/* Clock API calls */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p;
-	struct clk *clk = ERR_PTR(-ENOENT);
-	int idno;
-
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
-	else
-		idno = to_platform_device(dev)->id;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(p, &clocks, list) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 &&
-		    try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-
-	/* check for the case where a device was supplied, but the
-	 * clock that was being searched for is not device specific */
-
-	if (IS_ERR(clk)) {
-		list_for_each_entry(p, &clocks, list) {
-			if (p->id == -1 && strcmp(id, p->name) == 0 &&
-			    try_module_get(p->owner)) {
-				clk = p;
-				break;
-			}
-		}
-	}
-
-	mutex_unlock(&clocks_mutex);
-	return clk;
-}
-
-void clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
-
-int clk_enable(struct clk *clk)
-{
-	if (IS_ERR(clk) || clk == NULL)
-		return -EINVAL;
-
-	clk_enable(clk->parent);
-
-	mutex_lock(&clocks_mutex);
-
-	if ((clk->usage++) == 0)
-		(clk->enable)(clk, 1);
-
-	mutex_unlock(&clocks_mutex);
-	return 0;
-}
-
-void clk_disable(struct clk *clk)
-{
-	if (IS_ERR(clk) || clk == NULL)
-		return;
-
-	mutex_lock(&clocks_mutex);
-
-	if ((--clk->usage) == 0)
-		(clk->enable)(clk, 0);
-
-	mutex_unlock(&clocks_mutex);
-	clk_disable(clk->parent);
-}
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (IS_ERR(clk))
-		return 0;
-
-	if (clk->rate != 0)
-		return clk->rate;
-
-	if (clk->get_rate != NULL)
-		return (clk->get_rate)(clk);
-
-	if (clk->parent != NULL)
-		return clk_get_rate(clk->parent);
-
-	return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (!IS_ERR(clk) && clk->round_rate)
-		return (clk->round_rate)(clk, rate);
-
-	return rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	/* We do not default just do a clk->rate = rate as
-	 * the clock may have been made this way by choice.
-	 */
-
-	WARN_ON(clk->set_rate == NULL);
-
-	if (clk->set_rate == NULL)
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	ret = (clk->set_rate)(clk, rate);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = 0;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-
-	if (clk->set_parent)
-		ret = (clk->set_parent)(clk, parent);
-
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_get);
-EXPORT_SYMBOL(clk_put);
-EXPORT_SYMBOL(clk_enable);
-EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_get_rate);
-EXPORT_SYMBOL(clk_round_rate);
-EXPORT_SYMBOL(clk_set_rate);
-EXPORT_SYMBOL(clk_get_parent);
-EXPORT_SYMBOL(clk_set_parent);
-
-/* base clocks */
-
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 0;
-}
-
-struct clk clk_xtal = {
-	.name		= "xtal",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_mpll = {
-	.name		= "mpll",
-	.id		= -1,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_upll = {
-	.name		= "upll",
-	.id		= -1,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_f = {
-	.name		= "fclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= &clk_mpll,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_h = {
-	.name		= "hclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_p = {
-	.name		= "pclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_usb_bus = {
-	.name		= "usb-bus",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= &clk_upll,
-};
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
-	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (enable)
-		dclkcon |= clk->ctrlbit;
-	else
-		dclkcon &= ~clk->ctrlbit;
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long dclkcon;
-	unsigned int uclk;
-
-	if (parent == &clk_upll)
-		uclk = 1;
-	else if (parent == &clk_p)
-		uclk = 0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
-	} else {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
-	}
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-
-static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
-{
-	unsigned long div;
-
-	if ((rate == 0) || !clk->parent)
-		return 0;
-
-	div = clk_get_rate(clk->parent) / rate;
-	if (div < 2)
-		div = 2;
-	else if (div > 16)
-		div = 16;
-
-	return div;
-}
-
-static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
-	unsigned long rate)
-{
-	unsigned long div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return 0;
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return -EINVAL;
-
-	if (clk == &s3c24xx_dclk0) {
-		mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
-			S3C2410_DCLKCON_DCLK0_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK0_DIV(div) |
-			S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
-	} else if (clk == &s3c24xx_dclk1) {
-		mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
-			S3C2410_DCLKCON_DCLK1_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK1_DIV(div) |
-			S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
-	} else
-		return -EINVAL;
-
-	clk->rate = clk_get_rate(clk->parent) / div;
-	__raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
-		S3C24XX_DCLKCON);
-	return clk->rate;
-}
-
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long mask;
-	unsigned long source;
-
-	/* calculate the MISCCR setting for the clock */
-
-	if (parent == &clk_xtal)
-		source = S3C2410_MISCCR_CLK0_MPLL;
-	else if (parent == &clk_upll)
-		source = S3C2410_MISCCR_CLK0_UPLL;
-	else if (parent == &clk_f)
-		source = S3C2410_MISCCR_CLK0_FCLK;
-	else if (parent == &clk_h)
-		source = S3C2410_MISCCR_CLK0_HCLK;
-	else if (parent == &clk_p)
-		source = S3C2410_MISCCR_CLK0_PCLK;
-	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	if (clk == &s3c24xx_clkout0)
-		mask = S3C2410_MISCCR_CLK0_MASK;
-	else {
-		source <<= 4;
-		mask = S3C2410_MISCCR_CLK1_MASK;
-	}
-
-	s3c2410_modify_misccr(mask, source);
-	return 0;
-}
-
-/* external clock definitions */
-
-struct clk s3c24xx_dclk0 = {
-	.name		= "dclk0",
-	.id		= -1,
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable	        = s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_dclk1 = {
-	.name		= "dclk1",
-	.id		= -1,
-	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
-	.enable		= s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_clkout0 = {
-	.name		= "clkout0",
-	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_clkout1 = {
-	.name		= "clkout1",
-	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_uclk = {
-	.name		= "uclk",
-	.id		= -1,
-};
-
-/* initialise the clock system */
-
-int s3c24xx_register_clock(struct clk *clk)
-{
-	clk->owner = THIS_MODULE;
-
-	if (clk->enable == NULL)
-		clk->enable = clk_null_enable;
-
-	/* add to the list of available clocks */
-
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->list, &clocks);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-
-int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
-{
-	int fails = 0;
-
-	for (; nr_clks > 0; nr_clks--, clks++) {
-		if (s3c24xx_register_clock(*clks) < 0)
-			fails++;
-	}
-
-	return fails;
-}
+#include <plat/pll.h>
 
 /* initalise all the clocks */
 
-int __init s3c24xx_setup_clocks(unsigned long xtal,
-				unsigned long fclk,
-				unsigned long hclk,
-				unsigned long pclk)
+void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
+					   unsigned long hclk,
+					   unsigned long pclk)
 {
-	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
-
-	/* initialise the main system clocks */
-
-	clk_xtal.rate = xtal;
-	clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+	clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
+					clk_xtal.rate);
 
 	clk_mpll.rate = fclk;
 	clk_h.rate = hclk;
 	clk_p.rate = pclk;
 	clk_f.rate = fclk;
-
-	/* assume uart clocks are correctly setup */
-
-	/* register our clocks */
-
-	if (s3c24xx_register_clock(&clk_xtal) < 0)
-		printk(KERN_ERR "failed to register master xtal\n");
-
-	if (s3c24xx_register_clock(&clk_mpll) < 0)
-		printk(KERN_ERR "failed to register mpll clock\n");
-
-	if (s3c24xx_register_clock(&clk_upll) < 0)
-		printk(KERN_ERR "failed to register upll clock\n");
-
-	if (s3c24xx_register_clock(&clk_f) < 0)
-		printk(KERN_ERR "failed to register cpu fclk\n");
-
-	if (s3c24xx_register_clock(&clk_h) < 0)
-		printk(KERN_ERR "failed to register cpu hclk\n");
-
-	if (s3c24xx_register_clock(&clk_p) < 0)
-		printk(KERN_ERR "failed to register cpu pclk\n");
-
-	return 0;
 }
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 3098736c65d9..3d4837021ac7 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -38,7 +38,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/leds-gpio.h>
 
-#include <asm/plat-s3c/nand.h>
+#include <plat/nand.h>
 
 #include <plat/common-smdk.h>
 #include <plat/devs.h>
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 22a329513c0f..542062f8cbc1 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -30,7 +30,6 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/delay.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -55,16 +54,6 @@
 #include <plat/s3c2442.h>
 #include <plat/s3c2443.h>
 
-struct cpu_table {
-	unsigned long	idcode;
-	unsigned long	idmask;
-	void		(*map_io)(struct map_desc *mach_desc, int size);
-	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
-	void		(*init_clocks)(int xtal);
-	int		(*init)(void);
-	const char	*name;
-};
-
 /* table of supported CPUs */
 
 static const char name_s3c2400[]  = "S3C2400";
@@ -169,23 +158,7 @@ static struct map_desc s3c_iodesc[] __initdata = {
 	IODESC_ENT(UART)
 };
 
-static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode)
-{
-	struct cpu_table *tab;
-	int count;
-
-	tab = cpu_ids;
-	for (count = 0; count < ARRAY_SIZE(cpu_ids); count++, tab++) {
-		if ((idcode & tab->idmask) == tab->idcode)
-			return tab;
-	}
-
-	return NULL;
-}
-
-/* cpu information */
-
-static struct cpu_table *cpu;
+/* read cpu identificaiton code */
 
 static unsigned long s3c24xx_read_idcode_v5(void)
 {
@@ -231,6 +204,7 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 	unsigned long idcode = 0x0;
 
 	/* initialise the io descriptors we need for initialisation */
+	iotable_init(mach_desc, size);
 	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 
 	if (cpu_architecture() >= CPU_ARCH_ARMv5) {
@@ -239,117 +213,7 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 		idcode = s3c24xx_read_idcode_v4();
 	}
 
-	cpu = s3c_lookup_cpu(idcode);
-
-	if (cpu == NULL) {
-		printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
-		panic("Unknown S3C24XX CPU");
-	}
-
-	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
-
-	if (cpu->map_io == NULL || cpu->init == NULL) {
-		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
-		panic("Unsupported S3C24XX CPU");
-	}
-
 	arm_pm_restart = s3c24xx_pm_restart;
 
-	(cpu->map_io)(mach_desc, size);
-}
-
-/* s3c24xx_init_clocks
- *
- * Initialise the clock subsystem and associated information from the
- * given master crystal value.
- *
- * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
- *      != 0 -> PLL crystal value in Hz
-*/
-
-void __init s3c24xx_init_clocks(int xtal)
-{
-	if (xtal == 0)
-		xtal = 12*1000*1000;
-
-	if (cpu == NULL)
-		panic("s3c24xx_init_clocks: no cpu setup?\n");
-
-	if (cpu->init_clocks == NULL)
-		panic("s3c24xx_init_clocks: cpu has no clock init\n");
-	else
-		(cpu->init_clocks)(xtal);
+	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
-
-/* uart management */
-
-static int nr_uarts __initdata = 0;
-
-static struct s3c2410_uartcfg uart_cfgs[3];
-
-/* s3c24xx_init_uartdevs
- *
- * copy the specified platform data and configuration into our central
- * set of devices, before the data is thrown away after the init process.
- *
- * This also fills in the array passed to the serial driver for the
- * early initialisation of the console.
-*/
-
-void __init s3c24xx_init_uartdevs(char *name,
-				  struct s3c24xx_uart_resources *res,
-				  struct s3c2410_uartcfg *cfg, int no)
-{
-	struct platform_device *platdev;
-	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
-	struct s3c24xx_uart_resources *resp;
-	int uart;
-
-	memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
-
-	for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
-		platdev = s3c24xx_uart_src[cfgptr->hwport];
-
-		resp = res + cfgptr->hwport;
-
-		s3c24xx_uart_devs[uart] = platdev;
-
-		platdev->name = name;
-		platdev->resource = resp->resources;
-		platdev->num_resources = resp->nr_resources;
-
-		platdev->dev.platform_data = cfgptr;
-	}
-
-	nr_uarts = no;
-}
-
-void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	if (cpu == NULL)
-		return;
-
-	if (cpu->init_uarts == NULL) {
-		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
-	} else
-		(cpu->init_uarts)(cfg, no);
-}
-
-static int __init s3c_arch_init(void)
-{
-	int ret;
-
-	// do the correct init for cpu
-
-	if (cpu == NULL)
-		panic("s3c_arch_init: NULL cpu\n");
-
-	ret = (cpu->init)();
-	if (ret != 0)
-		return ret;
-
-	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
-	return ret;
-}
-
-arch_initcall(s3c_arch_init);
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index e93f8bf6d338..16ac01d9b8ab 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -29,11 +29,11 @@
 #include <asm/irq.h>
 
 #include <plat/regs-serial.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/udc.h>
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
 
 /* Serial port registrations */
 
@@ -76,6 +76,19 @@ static struct resource s3c2410_uart2_resource[] = {
 	}
 };
 
+static struct resource s3c2410_uart3_resource[] = {
+	[0] = {
+		.start = S3C2443_PA_UART3,
+		.end   = S3C2443_PA_UART3 + 0x3fff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3CUART_RX3,
+		.end   = IRQ_S3CUART_ERR3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
 	[0] = {
 		.resources	= s3c2410_uart0_resource,
@@ -89,6 +102,10 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
 		.resources	= s3c2410_uart2_resource,
 		.nr_resources	= ARRAY_SIZE(s3c2410_uart2_resource),
 	},
+	[3] = {
+		.resources	= s3c2410_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s3c2410_uart3_resource),
+	},
 };
 
 /* yart devices */
@@ -105,13 +122,18 @@ static struct platform_device s3c24xx_uart_device2 = {
 	.id		= 2,
 };
 
-struct platform_device *s3c24xx_uart_src[3] = {
+static struct platform_device s3c24xx_uart_device3 = {
+	.id		= 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
 	&s3c24xx_uart_device0,
 	&s3c24xx_uart_device1,
 	&s3c24xx_uart_device2,
+	&s3c24xx_uart_device3,
 };
 
-struct platform_device *s3c24xx_uart_devs[3] = {
+struct platform_device *s3c24xx_uart_devs[4] = {
 };
 
 /* USB Host Controller */
@@ -192,8 +214,8 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 
 static struct resource s3c_nand_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_NAND,
-		.end   = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1,
+		.start = S3C24XX_PA_NAND,
+		.end   = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
 		.flags = IORESOURCE_MEM,
 	}
 };
@@ -271,31 +293,6 @@ struct platform_device s3c_device_wdt = {
 
 EXPORT_SYMBOL(s3c_device_wdt);
 
-/* I2C */
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_IIC,
-		.end   = S3C24XX_PA_IIC + S3C24XX_SZ_IIC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IIC,
-		.end   = IRQ_IIC,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_i2c = {
-	.name		  = "s3c2410-i2c",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
-	.resource	  = s3c_i2c_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_i2c);
-
 /* IIS */
 
 static struct resource s3c_iis_resource[] = {
@@ -372,18 +369,26 @@ static struct resource s3c_adc_resource[] = {
 };
 
 struct platform_device s3c_device_adc = {
-	.name		  = "s3c2410-adc",
+	.name		  = "s3c24xx-adc",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s3c_adc_resource),
 	.resource	  = s3c_adc_resource,
 };
 
+/* HWMON */
+
+struct platform_device s3c_device_hwmon = {
+	.name		= "s3c24xx-hwmon",
+	.id		= -1,
+	.dev.parent	= &s3c_device_adc.dev,
+};
+
 /* SDI */
 
 static struct resource s3c_sdi_resource[] = {
 	[0] = {
-		.start = S3C2410_PA_SDI,
-		.end   = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
+		.start = S3C24XX_PA_SDI,
+		.end   = S3C24XX_PA_SDI + S3C24XX_SZ_SDI - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -403,36 +408,6 @@ struct platform_device s3c_device_sdi = {
 
 EXPORT_SYMBOL(s3c_device_sdi);
 
-/* High-speed MMC/SD */
-
-static struct resource s3c_hsmmc_resource[] = {
-	[0] = {
-		.start = S3C2443_PA_HSMMC,
-		.end   = S3C2443_PA_HSMMC + S3C2443_SZ_HSMMC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3C2443_HSMMC,
-		.end   = IRQ_S3C2443_HSMMC,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_hsmmc = {
-	.name		  = "s3c-sdhci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_hsmmc_resource),
-	.resource	  = s3c_hsmmc_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_hsmmc_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-
-
 /* SPI (0) */
 
 static struct resource s3c_spi0_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 1baf941d1930..aee2aeb46c60 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -25,15 +25,13 @@
 #include <linux/sysdev.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
-#include <linux/delay.h>
 #include <linux/io.h>
 
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
 
-#include <asm/mach/dma.h>
 #include <mach/map.h>
 
 #include <plat/dma.h>
@@ -804,7 +802,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
  * allowed to go through.
 */
 
-int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
+int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 {
 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 	unsigned long flags;
@@ -995,7 +993,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
 }
 
 int
-s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
+s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
 {
 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
@@ -1043,7 +1041,7 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
  * dcon:         base value of the DCONx register
 */
 
-int s3c2410_dma_config(dmach_t channel,
+int s3c2410_dma_config(unsigned int channel,
 		       int xferunit,
 		       int dcon)
 {
@@ -1092,7 +1090,7 @@ int s3c2410_dma_config(dmach_t channel,
 
 EXPORT_SYMBOL(s3c2410_dma_config);
 
-int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
+int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
 {
 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
@@ -1113,7 +1111,7 @@ EXPORT_SYMBOL(s3c2410_dma_setflags);
  * irq?
 */
 
-int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
+int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
 {
 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
@@ -1129,7 +1127,7 @@ int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
 
 EXPORT_SYMBOL(s3c2410_dma_set_opfn);
 
-int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
+int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
 {
 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
@@ -1219,7 +1217,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
  * returns the current transfer points for the dma source and destination
 */
 
-int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
+int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
 {
  	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 3caec6bad3eb..f95c6c9d9f1a 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,104 +19,12 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
+#include <plat/gpio-core.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <mach/regs-gpio.h>
 
-struct s3c24xx_gpio_chip {
-	struct gpio_chip	chip;
-	void __iomem		*base;
-};
-
-static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc)
-{
-	return container_of(gpc, struct s3c24xx_gpio_chip, chip);
-}
-
-/* these routines are exported for use by other parts of the platform
- * and system support, but are not intended to be used directly by the
- * drivers themsevles.
- */
-
-static int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long con;
-
-	local_irq_save(flags);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-	con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
-
-	__raw_writel(con, base + 0x00);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int s3c24xx_gpiolib_output(struct gpio_chip *chip,
-				  unsigned offset, int value)
-{
-	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	local_irq_save(flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-	con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-static void s3c24xx_gpiolib_set(struct gpio_chip *chip,
-				unsigned offset, int value)
-{
-	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-
-	local_irq_save(flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-}
-
-static int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
-	unsigned long val;
-
-	val = __raw_readl(ourchip->base + 0x04);
-	val >>= offset;
-	val &= 1;
-
-	return val;
-}
-
 static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
 {
 	return -EINVAL;
@@ -125,7 +33,7 @@ static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
 static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
 					unsigned offset, int value)
 {
-	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
 	void __iomem *base = ourchip->base;
 	unsigned long flags;
 	unsigned long dat;
@@ -151,7 +59,7 @@ static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
 	return 0;
 }
 
-static struct s3c24xx_gpio_chip gpios[] = {
+struct s3c_gpio_chip s3c24xx_gpios[] = {
 	[0] = {
 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
 		.chip	= {
@@ -161,8 +69,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
 			.ngpio			= 24,
 			.direction_input	= s3c24xx_gpiolib_banka_input,
 			.direction_output	= s3c24xx_gpiolib_banka_output,
-			.set			= s3c24xx_gpiolib_set,
-			.get			= s3c24xx_gpiolib_get,
 		},
 	},
 	[1] = {
@@ -172,10 +78,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
 			.owner			= THIS_MODULE,
 			.label			= "GPIOB",
 			.ngpio			= 16,
-			.direction_input	= s3c24xx_gpiolib_input,
-			.direction_output	= s3c24xx_gpiolib_output,
-			.set			= s3c24xx_gpiolib_set,
-			.get			= s3c24xx_gpiolib_get,
 		},
 	},
 	[2] = {
@@ -185,10 +87,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
 			.owner			= THIS_MODULE,
 			.label			= "GPIOC",
 			.ngpio			= 16,
-			.direction_input	= s3c24xx_gpiolib_input,
-			.direction_output	= s3c24xx_gpiolib_output,
-			.set			= s3c24xx_gpiolib_set,
-			.get			= s3c24xx_gpiolib_get,
 		},
 	},
 	[3] = {
@@ -198,10 +96,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
 			.owner			= THIS_MODULE,
 			.label			= "GPIOD",
 			.ngpio			= 16,
-			.direction_input	= s3c24xx_gpiolib_input,
-			.direction_output	= s3c24xx_gpiolib_output,
-			.set			= s3c24xx_gpiolib_set,
-			.get			= s3c24xx_gpiolib_get,
 		},
 	},
 	[4] = {
@@ -211,10 +105,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
 			.label			= "GPIOE",
 			.owner			= THIS_MODULE,
 			.ngpio			= 16,
-			.direction_input	= s3c24xx_gpiolib_input,
-			.direction_output	= s3c24xx_gpiolib_output,
-			.set			= s3c24xx_gpiolib_set,
-			.get			= s3c24xx_gpiolib_get,
 		},
 	},
 	[5] = {
@@ -224,10 +114,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
 			.owner			= THIS_MODULE,
 			.label			= "GPIOF",
 			.ngpio			= 8,
-			.direction_input	= s3c24xx_gpiolib_input,
-			.direction_output	= s3c24xx_gpiolib_output,
-			.set			= s3c24xx_gpiolib_set,
-			.get			= s3c24xx_gpiolib_get,
 		},
 	},
 	[6] = {
@@ -237,21 +123,17 @@ static struct s3c24xx_gpio_chip gpios[] = {
 			.owner			= THIS_MODULE,
 			.label			= "GPIOG",
 			.ngpio			= 10,
-			.direction_input	= s3c24xx_gpiolib_input,
-			.direction_output	= s3c24xx_gpiolib_output,
-			.set			= s3c24xx_gpiolib_set,
-			.get			= s3c24xx_gpiolib_get,
 		},
 	},
 };
 
 static __init int s3c24xx_gpiolib_init(void)
 {
-	struct s3c24xx_gpio_chip *chip = gpios;
+	struct s3c_gpio_chip *chip = s3c24xx_gpios;
 	int gpn;
 
-	for (gpn = 0; gpn < ARRAY_SIZE(gpios); gpn++, chip++)
-		gpiochip_add(&chip->chip);
+	for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++)
+		s3c_gpiolib_add(chip);
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h b/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
new file mode 100644
index 000000000000..a087de21bc20
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
@@ -0,0 +1,55 @@
+/* linux/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C24xx - pwm clock and timer support
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @cfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg == S3C2410_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << (1 + tcfg1);
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 0;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div) - 1;
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
new file mode 100644
index 000000000000..fef8ea8b8e1e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -0,0 +1,99 @@
+/* linux/include/asm-arm/plat-s3c24xx/map.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S3C24XX_MAP_H
+#define __ASM_PLAT_S3C24XX_MAP_H
+
+/* interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C24XX_VA_IRQ	   S3C_VA_IRQ
+#define S3C2410_PA_IRQ	   (0x4A000000)
+#define S3C24XX_SZ_IRQ	   SZ_1M
+
+/* memory controller registers */
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* UARTs */
+#define S3C24XX_VA_UART	   S3C_VA_UART
+#define S3C2410_PA_UART	   (0x50000000)
+#define S3C24XX_SZ_UART	   SZ_1M
+#define S3C_UART_OFFSET	   (0x4000)
+
+/* Timers */
+#define S3C24XX_VA_TIMER   S3C_VA_TIMER
+#define S3C2410_PA_TIMER   (0x51000000)
+#define S3C24XX_SZ_TIMER   SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
+#define S3C24XX_SZ_CLKPWR  SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV  (0x52000000)
+#define S3C24XX_SZ_USBDEV  SZ_1M
+
+/* Watchdog */
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_IIS		SZ_1M
+#define S3C24XX_SZ_ADC		SZ_1M
+#define S3C24XX_SZ_SPI		SZ_1M
+#define S3C24XX_SZ_SDI		SZ_1M
+#define S3C24XX_SZ_NAND		SZ_1M
+#define S3C24XX_SZ_USBHOST	SZ_1M
+
+/* GPIO ports */
+
+/* the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 maping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO	   (0x56000000)
+#define S3C24XX_VA_GPIO	   ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C24XX_SZ_GPIO	   SZ_1M
+
+
+/* ISA style IO, for each machine to sort out mappings for, if it
+ * implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#endif /* __ASM_PLAT_S3C24XX_MAP_H */
diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index 2d0852ac3b27..2d0852ac3b27 100644
--- a/include/asm-arm/plat-s3c24xx/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h
new file mode 100644
index 000000000000..7ea8bffa7a9c
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/pll.h
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C24xx - common pll registers and code
+ */
+
+#define S3C24XX_PLLCON_MDIVSHIFT	12
+#define S3C24XX_PLLCON_PDIVSHIFT	4
+#define S3C24XX_PLLCON_SDIVSHIFT	0
+#define S3C24XX_PLLCON_MDIVMASK		((1<<(1+(19-12)))-1)
+#define S3C24XX_PLLCON_PDIVMASK		((1<<5)-1)
+#define S3C24XX_PLLCON_SDIVMASK		3
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C24XX_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C24XX_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C24XX_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C24XX_PLLCON_MDIVMASK;
+	pdiv &= S3C24XX_PLLCON_PDIVMASK;
+	sdiv &= S3C24XX_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h
index 2b35479ee35c..2b35479ee35c 100644
--- a/include/asm-arm/plat-s3c24xx/regs-spi.h
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h
diff --git a/include/asm-arm/plat-s3c24xx/regs-udc.h b/arch/arm/plat-s3c24xx/include/plat/regs-udc.h
index f0dd4a41b37b..f0dd4a41b37b 100644
--- a/include/asm-arm/plat-s3c24xx/regs-udc.h
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-udc.h
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
index 3a5a16821af8..b3feaea5c70b 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h
@@ -17,7 +17,7 @@
 
 extern  int s3c2400_init(void);
 
-extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
+extern void s3c2400_map_io(void);
 
 extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index 3cd1ec677b3f..a9ac9e29759e 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -15,7 +15,7 @@
 
 extern  int s3c2410_init(void);
 
-extern void s3c2410_map_io(struct map_desc *mach_desc, int size);
+extern void s3c2410_map_io(void);
 
 extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
index 3ec97685e781..bb15d3b68be5 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h
@@ -14,7 +14,7 @@
 
 extern  int s3c2412_init(void);
 
-extern void s3c2412_map_io(struct map_desc *mach_desc, int size);
+extern void s3c2412_map_io(void);
 
 extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
index 11d83b5c84e6..815b107ed890 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
@@ -16,7 +16,7 @@ struct s3c2410_uartcfg;
 
 extern  int s3c2443_init(void);
 
-extern void s3c2443_map_io(struct map_desc *mach_desc, int size);
+extern void s3c2443_map_io(void);
 
 extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/include/asm-arm/plat-s3c24xx/udc.h b/arch/arm/plat-s3c24xx/include/plat/udc.h
index 546bb4008f49..546bb4008f49 100644
--- a/include/asm-arm/plat-s3c24xx/udc.h
+++ b/arch/arm/plat-s3c24xx/include/plat/udc.h
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 963f7a4f26f2..0192ecdc1442 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -62,6 +62,7 @@
 
 #include <asm/mach/irq.h>
 
+#include <plat/regs-irqtype.h>
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
 
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 8efb57ad5019..34ef18e5b2a1 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -33,7 +33,6 @@
 #include <linux/interrupt.h>
 #include <linux/crc32.h>
 #include <linux/ioport.h>
-#include <linux/delay.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
@@ -76,11 +75,13 @@ static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C2410_BANKCON4),
 	SAVE_ITEM(S3C2410_BANKCON5),
 
+#ifndef CONFIG_CPU_FREQ
 	SAVE_ITEM(S3C2410_CLKDIVN),
 	SAVE_ITEM(S3C2410_MPLLCON),
+	SAVE_ITEM(S3C2410_REFRESH),
+#endif
 	SAVE_ITEM(S3C2410_UPLLCON),
 	SAVE_ITEM(S3C2410_CLKSLOW),
-	SAVE_ITEM(S3C2410_REFRESH),
 };
 
 static struct gpio_sleep {
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c
index 4e07943c1e29..b61bdb793734 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c
@@ -272,5 +272,6 @@ int __init s3c2410_baseclk_add(void)
 	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
 	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
 
+	s3c_pwmclk_init();
 	return 0;
 }
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index 7c09773ff9fc..dde41f171aff 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -31,7 +31,6 @@
 #include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/mutex.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
@@ -102,13 +101,13 @@ static int s3c244x_clk_add(struct sys_device *sysdev)
 	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
 		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
 
-		mutex_lock(&clocks_mutex);
+		spin_lock(&clocks_lock);
 
 		clkdivn = __raw_readl(S3C2410_CLKDIVN);
 		clkdivn |= S3C2440_CLKDIVN_UCLK;
 		__raw_writel(clkdivn, S3C2410_CLKDIVN);
 
-		mutex_unlock(&clocks_mutex);
+		spin_unlock(&clocks_lock);
 	}
 
 	return 0;
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index c0344fac4a94..c1de6bb0101b 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -29,6 +29,8 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#include <plat/cpu-freq.h>
+
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
@@ -42,6 +44,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
+#include <plat/pll.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
@@ -56,32 +59,34 @@ void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
 }
 
-void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
+void __init s3c244x_map_io(void)
 {
 	/* register our io-tables */
 
 	iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
-	iotable_init(mach_desc, size);
 
 	/* rename any peripherals used differing from the s3c2410 */
 
 	s3c_device_sdi.name  = "s3c2440-sdi";
-	s3c_device_i2c.name  = "s3c2440-i2c";
+	s3c_device_i2c0.name  = "s3c2440-i2c";
 	s3c_device_nand.name = "s3c2440-nand";
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";
 }
 
-void __init s3c244x_init_clocks(int xtal)
+void __init_or_cpufreq s3c244x_setup_clocks(void)
 {
+	struct clk *xtal_clk;
 	unsigned long clkdiv;
 	unsigned long camdiv;
+	unsigned long xtal;
 	unsigned long hclk, fclk, pclk;
 	int hdiv = 1;
 
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
 
-	fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
+	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
 
 	clkdiv = __raw_readl(S3C2410_CLKDIVN);
 	camdiv = __raw_readl(S3C2440_CAMDIVN);
@@ -107,18 +112,24 @@ void __init s3c244x_init_clocks(int xtal)
 	}
 
 	hclk = fclk / hdiv;
-	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN)? 2:1);
+	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
 
 	/* print brief summary of clocks, etc */
 
 	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
 	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
 
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c244x_init_clocks(int xtal)
+{
 	/* initialise the clocks here, to allow other things like the
 	 * console to use them, and to add new ones after the initialisation
 	 */
 
-	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+	s3c24xx_register_baseclocks(xtal);
+	s3c244x_setup_clocks();
 	s3c2410_baseclk_add();
 }
 
diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/s3c244x.h
index f8ed17676a35..6aab5eaae2b4 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/s3c244x.h
@@ -12,7 +12,7 @@
 
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 
-extern void s3c244x_map_io(struct map_desc *mach_desc, int size);
+extern void s3c244x_map_io(void);
 
 extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c
new file mode 100644
index 000000000000..d62b7e7fb355
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/setup-i2c.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c24xx/setup-i2c.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Base setup for i2c device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+
+struct platform_device;
+
+#include <plat/iic.h>
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
+	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+}
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
new file mode 100644
index 000000000000..8b403cbb53d2
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+
+#include <mach/hardware.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
+					  int enable)
+{
+	if (enable) {
+		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
+		s3c2410_gpio_pullup(S3C2410_GPE11, 0);
+		s3c2410_gpio_pullup(S3C2410_GPE13, 0);
+	} else {
+		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPE11, 1);
+		s3c2410_gpio_pullup(S3C2410_GPE12, 1);
+		s3c2410_gpio_pullup(S3C2410_GPE13, 1);
+	}
+}
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
new file mode 100644
index 000000000000..8fccd4e549f0
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+
+#include <mach/hardware.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
+				       int enable)
+{
+	if (enable) {
+		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
+		s3c2410_gpio_pullup(S3C2410_GPG5, 0);
+		s3c2410_gpio_pullup(S3C2410_GPG6, 0);
+	} else {
+		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPG5, 1);
+		s3c2410_gpio_pullup(S3C2410_GPG6, 1);
+		s3c2410_gpio_pullup(S3C2410_GPG7, 1);
+	}
+}
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
new file mode 100644
index 000000000000..54375a00a7d2
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -0,0 +1,62 @@
+# arch/arm/plat-s3c64xx/Kconfig
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#	Ben Dooks <ben@simtec.co.uk>
+#
+# Licensed under GPLv2
+
+config PLAT_S3C64XX
+	bool
+	depends on ARCH_S3C64XX
+	default y
+	select CPU_V6
+	select PLAT_S3C
+	select ARM_VIC
+	select NO_IOPORT
+	select ARCH_REQUIRE_GPIOLIB
+	select S3C_GPIO_TRACK
+	select S3C_GPIO_PULL_UPDOWN
+	select S3C_GPIO_CFG_S3C24XX
+	select S3C_GPIO_CFG_S3C64XX
+	help
+	  Base platform code for any Samsung S3C64XX device
+
+if PLAT_S3C64XX
+
+# Configuration options shared by all S3C64XX implementations
+
+config CPU_S3C6400_INIT
+	bool
+	help
+	  Common initialisation code for the S3C6400 that is shared
+	  by other CPUs in the series, such as the S3C6410.
+
+config CPU_S3C6400_CLOCK
+	bool
+	help
+	  Common clock support code for the S3C6400 that is shared
+	  by other CPUs in the series, such as the S3C6410.
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
new file mode 100644
index 000000000000..2e6d79bf8f33
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -0,0 +1,31 @@
+# arch/arm/plat-s3c64xx/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:= dummy.o
+obj-				:=
+
+# Core files
+
+obj-y				+= dev-uart.o
+obj-y				+= cpu.o
+obj-y				+= irq.o
+obj-y				+= irq-eint.o
+obj-y				+= clock.o
+obj-y				+= gpiolib.o
+
+# CPU support
+
+obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
+obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
+
+# Device setup
+
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
new file mode 100644
index 000000000000..136c982c68e1
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/clock.c
@@ -0,0 +1,281 @@
+/* linux/arch/arm/plat-s3c64xx/clock.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX Base clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-sys.h>
+#include <plat/regs-clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S3C64XX_OTHERS);
+	if (enable)
+		val |= S3C64XX_OTHERS_USBMASK;
+	else
+		val &= ~S3C64XX_OTHERS_USBMASK;
+
+	__raw_writel(val, S3C64XX_OTHERS);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+static int inline s3c64xx_gate(void __iomem *reg,
+				struct clk *clk,
+				int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+
+	__raw_writel(con, reg);
+	return 0;
+}
+
+static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
+}
+
+static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
+}
+
+int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
+	}, {
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
+	}, {
+		.name		= "48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
+	}, {
+		.name		= "48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
+	}, {
+		.name		= "48m",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
+	},
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_UHOST,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
+	}
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+};
+
+void s3c64xx_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	clkp = init_clocks;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
new file mode 100644
index 000000000000..fbde183a4560
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -0,0 +1,114 @@
+/* linux/arch/arm/plat-s3c64xx/cpu.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
+
+/* table of supported CPUs */
+
+static const char name_s3c6400[] = "S3C6400";
+static const char name_s3c6410[] = "S3C6410";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= 0x36400000,
+		.idmask		= 0xfffff000,
+		.map_io		= s3c6400_map_io,
+		.init_clocks	= s3c6400_init_clocks,
+		.init_uarts	= s3c6400_init_uarts,
+		.init		= s3c6400_init,
+		.name		= name_s3c6400,
+	}, {
+		.idcode		= 0x36410100,
+		.idmask		= 0xffffff00,
+		.map_io		= s3c6410_map_io,
+		.init_clocks	= s3c6410_init_clocks,
+		.init_uarts	= s3c6410_init_uarts,
+		.init		= s3c6410_init,
+		.name		= name_s3c6410,
+	},
+};
+
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s3c6400/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xfffff)
+
+static struct map_desc s3c_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_VIC0,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_VIC1,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S3C_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_GPIO,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* read cpu identification code */
+
+void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+{
+	unsigned long idcode;
+
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+	iotable_init(mach_desc, size);
+
+	idcode = __raw_readl(S3C_VA_SYS + 0x118);
+	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/plat-s3c64xx/dev-uart.c
new file mode 100644
index 000000000000..62c11a6fc7ba
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/dev-uart.c
@@ -0,0 +1,176 @@
+/* linux/arch/arm/plat-s3c64xx/dev-uart.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s3c64xx_uart0_resource[] = {
+	[0] = {
+		.start	= S3C_PA_UART0,
+		.end	= S3C_PA_UART0 + 0x100,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX0,
+		.end	= IRQ_S3CUART_RX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX0,
+		.end	= IRQ_S3CUART_TX0,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR0,
+		.end	= IRQ_S3CUART_ERR0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s3c64xx_uart1_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART1,
+		.end   = S3C_PA_UART1 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX1,
+		.end	= IRQ_S3CUART_RX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX1,
+		.end	= IRQ_S3CUART_TX1,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR1,
+		.end	= IRQ_S3CUART_ERR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s3c6xx_uart2_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART2,
+		.end   = S3C_PA_UART2 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX2,
+		.end	= IRQ_S3CUART_RX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX2,
+		.end	= IRQ_S3CUART_TX2,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR2,
+		.end	= IRQ_S3CUART_ERR2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s3c64xx_uart3_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART3,
+		.end   = S3C_PA_UART3 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX3,
+		.end	= IRQ_S3CUART_RX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX3,
+		.end	= IRQ_S3CUART_TX3,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR3,
+		.end	= IRQ_S3CUART_ERR3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s3c64xx_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart0_resource),
+	},
+	[1] = {
+		.resources	= s3c64xx_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart1_resource),
+	},
+	[2] = {
+		.resources	= s3c6xx_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s3c6xx_uart2_resource),
+	},
+	[3] = {
+		.resources	= s3c64xx_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart3_resource),
+	},
+};
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+	.id		= 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+	.id		= 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+	.id		= 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+	.id		= 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+	&s3c24xx_uart_device0,
+	&s3c24xx_uart_device1,
+	&s3c24xx_uart_device2,
+	&s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
+
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
new file mode 100644
index 000000000000..cc62941d7b5c
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -0,0 +1,420 @@
+/* arch/arm/plat-s3c64xx/gpiolib.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIOlib support 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/gpio-core.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/regs-gpio.h>
+
+/* GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	8	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	5	4Bit	Yes	3
+ * E	5	4Bit	Yes	None
+ * F	16	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	16	4Bit[2]	No	None
+ * L	15	4Bit[2] No	None
+ * M	6	4Bit	No	IRQ_EINT
+ * N	16	2Bit	No	IRQ_EINT
+ * O	16	2Bit	Yes	7
+ * P	15	2Bit	Yes	8
+ * Q	9	2Bit	Yes	9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+#define OFF_GPCON	(0x00)
+#define OFF_GPDAT	(0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
+#if 1
+#define gpio_dbg(x...) do { } while(0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG ## x)
+#endif
+
+/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *	        gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+*/
+
+static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + OFF_GPCON);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + OFF_GPCON);
+
+	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip,
+				       unsigned offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + OFF_GPCON);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + OFF_GPDAT);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + OFF_GPDAT);
+	__raw_writel(con, base + OFF_GPCON);
+	__raw_writel(dat, base + OFF_GPDAT);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+/* The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ *	        gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ *	        gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
+ * store the 'base + 0x4' address so that these routines see the data
+ * register at ourchip->base + 0x04.
+*/
+
+static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+
+	if (offset > 7)
+		offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+	return 0;
+
+}
+
+static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip,
+				       unsigned offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+
+	if (offset > 7)
+		offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + OFF_GPDAT);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + OFF_GPDAT);
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + OFF_GPDAT);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
+	.cfg_eint	= 7,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
+	.cfg_eint	= 3,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip gpio_4bit[] = {
+	{
+		.base	= S3C64XX_GPA_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPA(0),
+			.ngpio	= S3C64XX_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.base	= S3C64XX_GPB_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPB(0),
+			.ngpio	= S3C64XX_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S3C64XX_GPC_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPC(0),
+			.ngpio	= S3C64XX_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S3C64XX_GPD_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPD(0),
+			.ngpio	= S3C64XX_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S3C64XX_GPE_BASE,
+		.config	= &gpio_4bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPE(0),
+			.ngpio	= S3C64XX_GPIO_E_NR,
+			.label	= "GPE",
+		},
+	}, {
+		.base	= S3C64XX_GPG_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPG(0),
+			.ngpio	= S3C64XX_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S3C64XX_GPM_BASE,
+		.config	= &gpio_4bit_cfg_eint0011,
+		.chip	= {
+			.base	= S3C64XX_GPM(0),
+			.ngpio	= S3C64XX_GPIO_M_NR,
+			.label	= "GPM",
+		},
+	},
+};
+
+static struct s3c_gpio_chip gpio_4bit2[] = {
+	{
+		.base	= S3C64XX_GPH_BASE + 0x4,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPH(0),
+			.ngpio	= S3C64XX_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	}, {
+		.base	= S3C64XX_GPK_BASE + 0x4,
+		.config	= &gpio_4bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPK(0),
+			.ngpio	= S3C64XX_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	}, {
+		.base	= S3C64XX_GPL_BASE + 0x4,
+		.config	= &gpio_4bit_cfg_eint0011,
+		.chip	= {
+			.base	= S3C64XX_GPL(0),
+			.ngpio	= S3C64XX_GPIO_L_NR,
+			.label	= "GPL",
+		},
+	},
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
+	.cfg_eint	= 2,
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
+	.cfg_eint	= 3,
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip gpio_2bit[] = {
+	{
+		.base	= S3C64XX_GPF_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPF(0),
+			.ngpio	= S3C64XX_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S3C64XX_GPI_BASE,
+		.config	= &gpio_2bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPI(0),
+			.ngpio	= S3C64XX_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S3C64XX_GPJ_BASE,
+		.config	= &gpio_2bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPJ(0),
+			.ngpio	= S3C64XX_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S3C64XX_GPN_BASE,
+		.config	= &gpio_2bit_cfg_eint10,
+		.chip	= {
+			.base	= S3C64XX_GPN(0),
+			.ngpio	= S3C64XX_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S3C64XX_GPO_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPO(0),
+			.ngpio	= S3C64XX_GPIO_O_NR,
+			.label	= "GPO",
+		},
+	}, {
+		.base	= S3C64XX_GPP_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPP(0),
+			.ngpio	= S3C64XX_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.base	= S3C64XX_GPQ_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPQ(0),
+			.ngpio	= S3C64XX_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	},
+};
+
+static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
+	chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
+}
+
+static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
+	chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
+}
+
+static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
+				       int nr_chips,
+				       void (*fn)(struct s3c_gpio_chip *))
+{
+	for (; nr_chips > 0; nr_chips--, chips++) {
+		if (fn)
+			(fn)(chips);
+		s3c_gpiolib_add(chips);
+	}
+}
+
+static __init int s3c64xx_gpiolib_init(void)
+{
+	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
+			    s3c64xx_gpiolib_add_4bit);
+
+	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
+			    s3c64xx_gpiolib_add_4bit2);
+
+	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL);
+
+	return 0;
+}
+
+arch_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
new file mode 100644
index 000000000000..9aa0e427d113
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
@@ -0,0 +1,48 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank A register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPACON			(S3C64XX_GPA_BASE + 0x00)
+#define S3C64XX_GPADAT			(S3C64XX_GPA_BASE + 0x04)
+#define S3C64XX_GPAPUD			(S3C64XX_GPA_BASE + 0x08)
+#define S3C64XX_GPACONSLP		(S3C64XX_GPA_BASE + 0x0c)
+#define S3C64XX_GPAPUDSLP		(S3C64XX_GPA_BASE + 0x10)
+
+#define S3C64XX_GPA_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPA_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPA_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPA0_UART_RXD0		(0x02 << 0)
+#define S3C64XX_GPA0_EINT_G1_0		(0x07 << 0)
+
+#define S3C64XX_GPA1_UART_TXD0		(0x02 << 4)
+#define S3C64XX_GPA1_EINT_G1_1		(0x07 << 4)
+
+#define S3C64XX_GPA2_UART_nCTS0		(0x02 << 8)
+#define S3C64XX_GPA2_EINT_G1_2		(0x07 << 8)
+
+#define S3C64XX_GPA3_UART_nRTS0		(0x02 << 12)
+#define S3C64XX_GPA3_EINT_G1_3		(0x07 << 12)
+
+#define S3C64XX_GPA4_UART_RXD1		(0x02 << 16)
+#define S3C64XX_GPA4_EINT_G1_4		(0x07 << 16)
+
+#define S3C64XX_GPA5_UART_TXD1		(0x02 << 20)
+#define S3C64XX_GPA5_EINT_G1_5		(0x07 << 20)
+
+#define S3C64XX_GPA6_UART_nCTS1		(0x02 << 24)
+#define S3C64XX_GPA6_EINT_G1_6		(0x07 << 24)
+
+#define S3C64XX_GPA7_UART_nRTS1		(0x02 << 28)
+#define S3C64XX_GPA7_EINT_G1_7		(0x07 << 28)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
new file mode 100644
index 000000000000..3933adb4d50a
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
@@ -0,0 +1,60 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank B register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPBCON			(S3C64XX_GPB_BASE + 0x00)
+#define S3C64XX_GPBDAT			(S3C64XX_GPB_BASE + 0x04)
+#define S3C64XX_GPBPUD			(S3C64XX_GPB_BASE + 0x08)
+#define S3C64XX_GPBCONSLP		(S3C64XX_GPB_BASE + 0x0c)
+#define S3C64XX_GPBPUDSLP		(S3C64XX_GPB_BASE + 0x10)
+
+#define S3C64XX_GPB_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPB_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPB_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPB0_UART_RXD2		(0x02 << 0)
+#define S3C64XX_GPB0_EXTDMA_REQ		(0x03 << 0)
+#define S3C64XX_GPB0_IrDA_RXD		(0x04 << 0)
+#define S3C64XX_GPB0_ADDR_CF0		(0x05 << 0)
+#define S3C64XX_GPB0_EINT_G1_8		(0x07 << 0)
+
+#define S3C64XX_GPB1_UART_TXD2		(0x02 << 4)
+#define S3C64XX_GPB1_EXTDMA_ACK		(0x03 << 4)
+#define S3C64XX_GPB1_IrDA_TXD		(0x04 << 4)
+#define S3C64XX_GPB1_ADDR_CF1		(0x05 << 4)
+#define S3C64XX_GPB1_EINT_G1_9		(0x07 << 4)
+
+#define S3C64XX_GPB2_UART_RXD3		(0x02 << 8)
+#define S3C64XX_GPB2_IrDA_RXD		(0x03 << 8)
+#define S3C64XX_GPB2_EXTDMA_REQ		(0x04 << 8)
+#define S3C64XX_GPB2_ADDR_CF2		(0x05 << 8)
+#define S3C64XX_GPB2_I2C_SCL1		(0x06 << 8)
+#define S3C64XX_GPB2_EINT_G1_10		(0x07 << 8)
+
+#define S3C64XX_GPB3_UART_TXD3		(0x02 << 12)
+#define S3C64XX_GPB3_IrDA_TXD		(0x03 << 12)
+#define S3C64XX_GPB3_EXTDMA_ACK		(0x04 << 12)
+#define S3C64XX_GPB3_I2C_SDA1		(0x06 << 12)
+#define S3C64XX_GPB3_EINT_G1_11		(0x07 << 12)
+
+#define S3C64XX_GPB4_IrDA_SDBW		(0x02 << 16)
+#define S3C64XX_GPB4_CAM_FIELD		(0x03 << 16)
+#define S3C64XX_GPB4_CF_DATA_DIR	(0x04 << 16)
+#define S3C64XX_GPB4_EINT_G1_12		(0x07 << 16)
+
+#define S3C64XX_GPB5_I2C_SCL0		(0x02 << 20)
+#define S3C64XX_GPB5_EINT_G1_13		(0x07 << 20)
+
+#define S3C64XX_GPB6_I2C_SDA0		(0x02 << 24)
+#define S3C64XX_GPB6_EINT_G1_14		(0x07 << 24)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
new file mode 100644
index 000000000000..c47daf7e2723
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
@@ -0,0 +1,53 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank C register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPCCON			(S3C64XX_GPC_BASE + 0x00)
+#define S3C64XX_GPCDAT			(S3C64XX_GPC_BASE + 0x04)
+#define S3C64XX_GPCPUD			(S3C64XX_GPC_BASE + 0x08)
+#define S3C64XX_GPCCONSLP		(S3C64XX_GPC_BASE + 0x0c)
+#define S3C64XX_GPCPUDSLP		(S3C64XX_GPC_BASE + 0x10)
+
+#define S3C64XX_GPC_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPC_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPC_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPC0_SPI_MISO0		(0x02 << 0)
+#define S3C64XX_GPC0_EINT_G2_0		(0x07 << 0)
+
+#define S3C64XX_GPC1_SPI_CLKO		(0x02 << 4)
+#define S3C64XX_GPC1_EINT_G2_1		(0x07 << 4)
+
+#define S3C64XX_GPC2_SPI_MOSIO		(0x02 << 8)
+#define S3C64XX_GPC2_EINT_G2_2		(0x07 << 8)
+
+#define S3C64XX_GPC3_SPI_nCSO		(0x02 << 12)
+#define S3C64XX_GPC3_EINT_G2_3		(0x07 << 12)
+
+#define S3C64XX_GPC4_SPI_MISO1		(0x02 << 16)
+#define S3C64XX_GPC4_MMC2_CMD		(0x03 << 16)
+#define S3C64XX_GPC4_I2S0_V40_DO	(0x05 << 16)
+#define S3C64XX_GPC4_EINT_G2_4		(0x07 << 16)
+
+#define S3C64XX_GPC5_SPI_CLK1		(0x02 << 20)
+#define S3C64XX_GPC5_MMC2_CLK		(0x03 << 20)
+#define S3C64XX_GPC5_I2S1_V40_DO	(0x05 << 20)
+#define S3C64XX_GPC5_EINT_G2_5		(0x07 << 20)
+
+#define S3C64XX_GPC6_SPI_MOSI1		(0x02 << 24)
+#define S3C64XX_GPC6_EINT_G2_6		(0x07 << 24)
+
+#define S3C64XX_GPC7_SPI_nCS1		(0x02 << 28)
+#define S3C64XX_GPC7_I2S2_V40_DO	(0x05 << 28)
+#define S3C64XX_GPC7_EINT_G2_7		(0x07 << 28)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
new file mode 100644
index 000000000000..6fe4a49c26f0
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
@@ -0,0 +1,49 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank D register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPDCON			(S3C64XX_GPD_BASE + 0x00)
+#define S3C64XX_GPDDAT			(S3C64XX_GPD_BASE + 0x04)
+#define S3C64XX_GPDPUD			(S3C64XX_GPD_BASE + 0x08)
+#define S3C64XX_GPDCONSLP		(S3C64XX_GPD_BASE + 0x0c)
+#define S3C64XX_GPDPUDSLP		(S3C64XX_GPD_BASE + 0x10)
+
+#define S3C64XX_GPD_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPD_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPD_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPD0_PCM0_SCLK		(0x02 << 0)
+#define S3C64XX_GPD0_I2S0_CLK		(0x03 << 0)
+#define S3C64XX_GPD0_AC97_BITCLK	(0x04 << 0)
+#define S3C64XX_GPD0_EINT_G3_0		(0x07 << 0)
+
+#define S3C64XX_GPD1_PCM0_EXTCLK	(0x02 << 4)
+#define S3C64XX_GPD1_I2S0_CDCLK		(0x03 << 4)
+#define S3C64XX_GPD1_AC97_nRESET	(0x04 << 4)
+#define S3C64XX_GPD1_EINT_G3_1		(0x07 << 4)
+
+#define S3C64XX_GPD2_PCM0_FSYNC		(0x02 << 8)
+#define S3C64XX_GPD2_I2S0_LRCLK		(0x03 << 8)
+#define S3C64XX_GPD2_AC97_SYNC		(0x04 << 8)
+#define S3C64XX_GPD2_EINT_G3_2		(0x07 << 8)
+
+#define S3C64XX_GPD3_PCM0_SIN		(0x02 << 12)
+#define S3C64XX_GPD3_I2S0_DI		(0x03 << 12)
+#define S3C64XX_GPD3_AC97_SDI		(0x04 << 12)
+#define S3C64XX_GPD3_EINT_G3_3		(0x07 << 12)
+
+#define S3C64XX_GPD4_PCM0_SOUT		(0x02 << 16)
+#define S3C64XX_GPD4_I2S0_D0		(0x03 << 16)
+#define S3C64XX_GPD4_AC97_SDO		(0x04 << 16)
+#define S3C64XX_GPD4_EINT_G3_4		(0x07 << 16)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
new file mode 100644
index 000000000000..7fcf3d8e0a48
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank E register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPECON			(S3C64XX_GPE_BASE + 0x00)
+#define S3C64XX_GPEDAT			(S3C64XX_GPE_BASE + 0x04)
+#define S3C64XX_GPEPUD			(S3C64XX_GPE_BASE + 0x08)
+#define S3C64XX_GPECONSLP		(S3C64XX_GPE_BASE + 0x0c)
+#define S3C64XX_GPEPUDSLP		(S3C64XX_GPE_BASE + 0x10)
+
+#define S3C64XX_GPE_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPE_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPE_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPE0_PCM1_SCLK		(0x02 << 0)
+#define S3C64XX_GPE0_I2S1_CLK		(0x03 << 0)
+#define S3C64XX_GPE0_AC97_BITCLK	(0x04 << 0)
+
+#define S3C64XX_GPE1_PCM1_EXTCLK	(0x02 << 4)
+#define S3C64XX_GPE1_I2S1_CDCLK		(0x03 << 4)
+#define S3C64XX_GPE1_AC97_nRESET	(0x04 << 4)
+
+#define S3C64XX_GPE2_PCM1_FSYNC		(0x02 << 8)
+#define S3C64XX_GPE2_I2S1_LRCLK		(0x03 << 8)
+#define S3C64XX_GPE2_AC97_SYNC		(0x04 << 8)
+
+#define S3C64XX_GPE3_PCM1_SIN		(0x02 << 12)
+#define S3C64XX_GPE3_I2S1_DI		(0x03 << 12)
+#define S3C64XX_GPE3_AC97_SDI		(0x04 << 12)
+
+#define S3C64XX_GPE4_PCM1_SOUT		(0x02 << 16)
+#define S3C64XX_GPE4_I2S1_D0		(0x03 << 16)
+#define S3C64XX_GPE4_AC97_SDO		(0x04 << 16)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
new file mode 100644
index 000000000000..f3faff974a18
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
@@ -0,0 +1,71 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank F register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPFCON			(S3C64XX_GPF_BASE + 0x00)
+#define S3C64XX_GPFDAT			(S3C64XX_GPF_BASE + 0x04)
+#define S3C64XX_GPFPUD			(S3C64XX_GPF_BASE + 0x08)
+#define S3C64XX_GPFCONSLP		(S3C64XX_GPF_BASE + 0x0c)
+#define S3C64XX_GPFPUDSLP		(S3C64XX_GPF_BASE + 0x10)
+
+#define S3C64XX_GPF_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPF_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPF_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPF0_CAMIF_CLK		(0x02 << 0)
+#define S3C64XX_GPF0_EINT_G4_0		(0x03 << 0)
+
+#define S3C64XX_GPF1_CAMIF_HREF		(0x02 << 2)
+#define S3C64XX_GPF1_EINT_G4_1		(0x03 << 2)
+
+#define S3C64XX_GPF2_CAMIF_PCLK		(0x02 << 4)
+#define S3C64XX_GPF2_EINT_G4_2		(0x03 << 4)
+
+#define S3C64XX_GPF3_CAMIF_nRST		(0x02 << 6)
+#define S3C64XX_GPF3_EINT_G4_3		(0x03 << 6)
+
+#define S3C64XX_GPF4_CAMIF_VSYNC	(0x02 << 8)
+#define S3C64XX_GPF4_EINT_G4_4		(0x03 << 8)
+
+#define S3C64XX_GPF5_CAMIF_YDATA0	(0x02 << 10)
+#define S3C64XX_GPF5_EINT_G4_5		(0x03 << 10)
+
+#define S3C64XX_GPF6_CAMIF_YDATA1	(0x02 << 12)
+#define S3C64XX_GPF6_EINT_G4_6		(0x03 << 12)
+
+#define S3C64XX_GPF7_CAMIF_YDATA2	(0x02 << 14)
+#define S3C64XX_GPF7_EINT_G4_7		(0x03 << 14)
+
+#define S3C64XX_GPF8_CAMIF_YDATA3	(0x02 << 16)
+#define S3C64XX_GPF8_EINT_G4_8		(0x03 << 16)
+
+#define S3C64XX_GPF9_CAMIF_YDATA4	(0x02 << 18)
+#define S3C64XX_GPF9_EINT_G4_9		(0x03 << 18)
+
+#define S3C64XX_GPF10_CAMIF_YDATA5	(0x02 << 20)
+#define S3C64XX_GPF10_EINT_G4_10	(0x03 << 20)
+
+#define S3C64XX_GPF11_CAMIF_YDATA6	(0x02 << 22)
+#define S3C64XX_GPF11_EINT_G4_11	(0x03 << 22)
+
+#define S3C64XX_GPF12_CAMIF_YDATA7	(0x02 << 24)
+#define S3C64XX_GPF12_EINT_G4_12	(0x03 << 24)
+
+#define S3C64XX_GPF13_PWM_ECLK		(0x02 << 26)
+#define S3C64XX_GPF13_EINT_G4_13	(0x03 << 26)
+
+#define S3C64XX_GPF14_PWM_TOUT0		(0x02 << 28)
+#define S3C64XX_GPF14_CLKOUT0		(0x03 << 28)
+
+#define S3C64XX_GPF15_PWM_TOUT1		(0x02 << 30)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
new file mode 100644
index 000000000000..35bbd2378e55
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
@@ -0,0 +1,42 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank G register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPGCON			(S3C64XX_GPG_BASE + 0x00)
+#define S3C64XX_GPGDAT			(S3C64XX_GPG_BASE + 0x04)
+#define S3C64XX_GPGPUD			(S3C64XX_GPG_BASE + 0x08)
+#define S3C64XX_GPGCONSLP		(S3C64XX_GPG_BASE + 0x0c)
+#define S3C64XX_GPGPUDSLP		(S3C64XX_GPG_BASE + 0x10)
+
+#define S3C64XX_GPG_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPG_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPG_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPG0_MMC0_CLK		(0x02 << 0)
+#define S3C64XX_GPG0_EINT_G5_0		(0x07 << 0)
+
+#define S3C64XX_GPG1_MMC0_CMD		(0x02 << 4)
+#define S3C64XX_GPG1_EINT_G5_1		(0x07 << 4)
+
+#define S3C64XX_GPG2_MMC0_DATA0		(0x02 << 8)
+#define S3C64XX_GPG2_EINT_G5_2		(0x07 << 8)
+
+#define S3C64XX_GPG3_MMC0_DATA1		(0x02 << 12)
+#define S3C64XX_GPG3_EINT_G5_3		(0x07 << 12)
+
+#define S3C64XX_GPG4_MMC0_DATA2		(0x02 << 16)
+#define S3C64XX_GPG4_EINT_G5_4		(0x07 << 16)
+
+#define S3C64XX_GPG5_MMC0_DATA3		(0x02 << 20)
+#define S3C64XX_GPG5_EINT_G5_5		(0x07 << 20)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
new file mode 100644
index 000000000000..81549516572f
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
@@ -0,0 +1,74 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank H register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPHCON0			(S3C64XX_GPH_BASE + 0x00)
+#define S3C64XX_GPHCON1			(S3C64XX_GPH_BASE + 0x04)
+#define S3C64XX_GPHDAT			(S3C64XX_GPH_BASE + 0x08)
+#define S3C64XX_GPHPUD			(S3C64XX_GPH_BASE + 0x0c)
+#define S3C64XX_GPHCONSLP		(S3C64XX_GPH_BASE + 0x10)
+#define S3C64XX_GPHPUDSLP		(S3C64XX_GPH_BASE + 0x14)
+
+#define S3C64XX_GPH_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPH_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPH_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPH0_MMC1_CLK		(0x02 << 0)
+#define S3C64XX_GPH0_KP_COL0		(0x04 << 0)
+#define S3C64XX_GPH0_EINT_G6_0		(0x07 << 0)
+
+#define S3C64XX_GPH1_MMC1_CMD		(0x02 << 4)
+#define S3C64XX_GPH1_KP_COL1		(0x04 << 4)
+#define S3C64XX_GPH1_EINT_G6_1		(0x07 << 4)
+
+#define S3C64XX_GPH2_MMC1_DATA0		(0x02 << 8)
+#define S3C64XX_GPH2_KP_COL2		(0x04 << 8)
+#define S3C64XX_GPH2_EINT_G6_2		(0x07 << 8)
+
+#define S3C64XX_GPH3_MMC1_DATA1		(0x02 << 12)
+#define S3C64XX_GPH3_KP_COL3		(0x04 << 12)
+#define S3C64XX_GPH3_EINT_G6_3		(0x07 << 12)
+
+#define S3C64XX_GPH4_MMC1_DATA2		(0x02 << 16)
+#define S3C64XX_GPH4_KP_COL4		(0x04 << 16)
+#define S3C64XX_GPH4_EINT_G6_4		(0x07 << 16)
+
+#define S3C64XX_GPH5_MMC1_DATA3		(0x02 << 20)
+#define S3C64XX_GPH5_KP_COL5		(0x04 << 20)
+#define S3C64XX_GPH5_EINT_G6_5		(0x07 << 20)
+
+#define S3C64XX_GPH6_MMC1_DATA4		(0x02 << 24)
+#define S3C64XX_GPH6_MMC2_DATA0		(0x03 << 24)
+#define S3C64XX_GPH6_KP_COL6		(0x04 << 24)
+#define S3C64XX_GPH6_I2S_V40_BCLK	(0x05 << 24)
+#define S3C64XX_GPH6_ADDR_CF0		(0x06 << 24)
+#define S3C64XX_GPH6_EINT_G6_6		(0x07 << 24)
+
+#define S3C64XX_GPH7_MMC1_DATA5		(0x02 << 28)
+#define S3C64XX_GPH7_MMC2_DATA1		(0x03 << 28)
+#define S3C64XX_GPH7_KP_COL7		(0x04 << 28)
+#define S3C64XX_GPH7_I2S_V40_CDCLK	(0x05 << 28)
+#define S3C64XX_GPH7_ADDR_CF1		(0x06 << 28)
+#define S3C64XX_GPH7_EINT_G6_7		(0x07 << 28)
+
+#define S3C64XX_GPH8_MMC1_DATA6		(0x02 << 32)
+#define S3C64XX_GPH8_MMC2_DATA2		(0x03 << 32)
+#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 << 32)
+#define S3C64XX_GPH8_ADDR_CF2		(0x06 << 32)
+#define S3C64XX_GPH8_EINT_G6_8		(0x07 << 32)
+
+#define S3C64XX_GPH9_MMC1_DATA7		(0x02 << 36)
+#define S3C64XX_GPH9_MMC2_DATA3		(0x03 << 36)
+#define S3C64XX_GPH9_I2S_V40_DI		(0x05 << 36)
+#define S3C64XX_GPH9_EINT_G6_9		(0x07 << 36)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
new file mode 100644
index 000000000000..ce9ebe335566
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
@@ -0,0 +1,40 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank I register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPICON			(S3C64XX_GPI_BASE + 0x00)
+#define S3C64XX_GPIDAT			(S3C64XX_GPI_BASE + 0x04)
+#define S3C64XX_GPIPUD			(S3C64XX_GPI_BASE + 0x08)
+#define S3C64XX_GPICONSLP		(S3C64XX_GPI_BASE + 0x0c)
+#define S3C64XX_GPIPUDSLP		(S3C64XX_GPI_BASE + 0x10)
+
+#define S3C64XX_GPI_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPI_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPI_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPI0_VD0		(0x02 << 0)
+#define S3C64XX_GPI1_VD1		(0x02 << 2)
+#define S3C64XX_GPI2_VD2		(0x02 << 4)
+#define S3C64XX_GPI3_VD3		(0x02 << 6)
+#define S3C64XX_GPI4_VD4		(0x02 << 8)
+#define S3C64XX_GPI5_VD5		(0x02 << 10)
+#define S3C64XX_GPI6_VD6		(0x02 << 12)
+#define S3C64XX_GPI7_VD7		(0x02 << 14)
+#define S3C64XX_GPI8_VD8		(0x02 << 16)
+#define S3C64XX_GPI9_VD9		(0x02 << 18)
+#define S3C64XX_GPI10_VD10		(0x02 << 20)
+#define S3C64XX_GPI11_VD11		(0x02 << 22)
+#define S3C64XX_GPI12_VD12		(0x02 << 24)
+#define S3C64XX_GPI13_VD13		(0x02 << 26)
+#define S3C64XX_GPI14_VD14		(0x02 << 28)
+#define S3C64XX_GPI15_VD15		(0x02 << 30)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
new file mode 100644
index 000000000000..21a906299d30
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank J register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPJCON			(S3C64XX_GPJ_BASE + 0x00)
+#define S3C64XX_GPJDAT			(S3C64XX_GPJ_BASE + 0x04)
+#define S3C64XX_GPJPUD			(S3C64XX_GPJ_BASE + 0x08)
+#define S3C64XX_GPJCONSLP		(S3C64XX_GPJ_BASE + 0x0c)
+#define S3C64XX_GPJPUDSLP		(S3C64XX_GPJ_BASE + 0x10)
+
+#define S3C64XX_GPJ_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPJ_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPJ_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPJ0_VD16		(0x02 << 0)
+#define S3C64XX_GPJ1_VD17		(0x02 << 2)
+#define S3C64XX_GPJ2_VD18		(0x02 << 4)
+#define S3C64XX_GPJ3_VD19		(0x02 << 6)
+#define S3C64XX_GPJ4_VD20		(0x02 << 8)
+#define S3C64XX_GPJ5_VD21		(0x02 << 10)
+#define S3C64XX_GPJ6_VD22		(0x02 << 12)
+#define S3C64XX_GPJ7_VD23		(0x02 << 14)
+#define S3C64XX_GPJ8_LCD_HSYNC		(0x02 << 16)
+#define S3C64XX_GPJ9_LCD_VSYNC		(0x02 << 18)
+#define S3C64XX_GPJ10_LCD_VDEN		(0x02 << 20)
+#define S3C64XX_GPJ11_LCD_VCLK		(0x02 << 22)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
new file mode 100644
index 000000000000..569e76120881
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
@@ -0,0 +1,54 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank N register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPNCON			(S3C64XX_GPN_BASE + 0x00)
+#define S3C64XX_GPNDAT			(S3C64XX_GPN_BASE + 0x04)
+#define S3C64XX_GPNPUD			(S3C64XX_GPN_BASE + 0x08)
+
+#define S3C64XX_GPN_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPN_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPN_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPN0_EINT0		(0x02 << 0)
+#define S3C64XX_GPN0_KP_ROW0		(0x03 << 0)
+
+#define S3C64XX_GPN1_EINT1		(0x02 << 2)
+#define S3C64XX_GPN1_KP_ROW1		(0x03 << 2)
+
+#define S3C64XX_GPN2_EINT2		(0x02 << 4)
+#define S3C64XX_GPN2_KP_ROW2		(0x03 << 4)
+
+#define S3C64XX_GPN3_EINT3		(0x02 << 6)
+#define S3C64XX_GPN3_KP_ROW3		(0x03 << 6)
+
+#define S3C64XX_GPN4_EINT4		(0x02 << 8)
+#define S3C64XX_GPN4_KP_ROW4		(0x03 << 8)
+
+#define S3C64XX_GPN5_EINT5		(0x02 << 10)
+#define S3C64XX_GPN5_KP_ROW5		(0x03 << 10)
+
+#define S3C64XX_GPN6_EINT6		(0x02 << 12)
+#define S3C64XX_GPN6_KP_ROW6		(0x03 << 12)
+
+#define S3C64XX_GPN7_EINT7		(0x02 << 14)
+#define S3C64XX_GPN7_KP_ROW7		(0x03 << 14)
+
+#define S3C64XX_GPN8_EINT8		(0x02 << 16)
+#define S3C64XX_GPN9_EINT9		(0x02 << 18)
+#define S3C64XX_GPN10_EINT10		(0x02 << 20)
+#define S3C64XX_GPN11_EINT11		(0x02 << 22)
+#define S3C64XX_GPN12_EINT12		(0x02 << 24)
+#define S3C64XX_GPN13_EINT13		(0x02 << 26)
+#define S3C64XX_GPN14_EINT14		(0x02 << 28)
+#define S3C64XX_GPN15_EINT15		(0x02 << 30)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
new file mode 100644
index 000000000000..b09e12954b57
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank O register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPOCON			(S3C64XX_GPO_BASE + 0x00)
+#define S3C64XX_GPODAT			(S3C64XX_GPO_BASE + 0x04)
+#define S3C64XX_GPOPUD			(S3C64XX_GPO_BASE + 0x08)
+#define S3C64XX_GPOCONSLP		(S3C64XX_GPO_BASE + 0x0c)
+#define S3C64XX_GPOPUDSLP		(S3C64XX_GPO_BASE + 0x10)
+
+#define S3C64XX_GPO_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPO_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPO0_MEM0_nCS2		(0x02 << 0)
+#define S3C64XX_GPO0_EINT_G7_0		(0x03 << 0)
+
+#define S3C64XX_GPO1_MEM0_nCS3		(0x02 << 2)
+#define S3C64XX_GPO1_EINT_G7_1		(0x03 << 2)
+
+#define S3C64XX_GPO2_MEM0_nCS4		(0x02 << 4)
+#define S3C64XX_GPO2_EINT_G7_2		(0x03 << 4)
+
+#define S3C64XX_GPO3_MEM0_nCS5		(0x02 << 6)
+#define S3C64XX_GPO3_EINT_G7_3		(0x03 << 6)
+
+#define S3C64XX_GPO4_EINT_G7_4		(0x03 << 8)
+
+#define S3C64XX_GPO5_EINT_G7_5		(0x03 << 10)
+
+#define S3C64XX_GPO6_MEM0_ADDR6		(0x02 << 12)
+#define S3C64XX_GPO6_EINT_G7_6		(0x03 << 12)
+
+#define S3C64XX_GPO7_MEM0_ADDR7		(0x02 << 14)
+#define S3C64XX_GPO7_EINT_G7_7		(0x03 << 14)
+
+#define S3C64XX_GPO8_MEM0_ADDR8		(0x02 << 16)
+#define S3C64XX_GPO8_EINT_G7_8		(0x03 << 16)
+
+#define S3C64XX_GPO9_MEM0_ADDR9		(0x02 << 18)
+#define S3C64XX_GPO9_EINT_G7_9		(0x03 << 18)
+
+#define S3C64XX_GPO10_MEM0_ADDR10	(0x02 << 20)
+#define S3C64XX_GPO10_EINT_G7_10	(0x03 << 20)
+
+#define S3C64XX_GPO11_MEM0_ADDR11	(0x02 << 22)
+#define S3C64XX_GPO11_EINT_G7_11	(0x03 << 22)
+
+#define S3C64XX_GPO12_MEM0_ADDR12	(0x02 << 24)
+#define S3C64XX_GPO12_EINT_G7_12	(0x03 << 24)
+
+#define S3C64XX_GPO13_MEM0_ADDR13	(0x02 << 26)
+#define S3C64XX_GPO13_EINT_G7_13	(0x03 << 26)
+
+#define S3C64XX_GPO14_MEM0_ADDR14	(0x02 << 28)
+#define S3C64XX_GPO14_EINT_G7_14	(0x03 << 28)
+
+#define S3C64XX_GPO15_MEM0_ADDR15	(0x02 << 30)
+#define S3C64XX_GPO15_EINT_G7_15	(0x03 << 30)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
new file mode 100644
index 000000000000..92f00517926b
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank P register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPPCON			(S3C64XX_GPP_BASE + 0x00)
+#define S3C64XX_GPPDAT			(S3C64XX_GPP_BASE + 0x04)
+#define S3C64XX_GPPPUD			(S3C64XX_GPP_BASE + 0x08)
+#define S3C64XX_GPPCONSLP		(S3C64XX_GPP_BASE + 0x0c)
+#define S3C64XX_GPPPUDSLP		(S3C64XX_GPP_BASE + 0x10)
+
+#define S3C64XX_GPP_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPP_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPP_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPP0_MEM0_ADDRV		(0x02 << 0)
+#define S3C64XX_GPP0_EINT_G8_0		(0x03 << 0)
+
+#define S3C64XX_GPP1_MEM0_SMCLK		(0x02 << 2)
+#define S3C64XX_GPP1_EINT_G8_1		(0x03 << 2)
+
+#define S3C64XX_GPP2_MEM0_nWAIT		(0x02 << 4)
+#define S3C64XX_GPP2_EINT_G8_2		(0x03 << 4)
+
+#define S3C64XX_GPP3_MEM0_RDY0_ALE	(0x02 << 6)
+#define S3C64XX_GPP3_EINT_G8_3		(0x03 << 6)
+
+#define S3C64XX_GPP4_MEM0_RDY1_CLE	(0x02 << 8)
+#define S3C64XX_GPP4_EINT_G8_4		(0x03 << 8)
+
+#define S3C64XX_GPP5_MEM0_INTsm0_FWE	(0x02 << 10)
+#define S3C64XX_GPP5_EINT_G8_5		(0x03 << 10)
+
+#define S3C64XX_GPP6_MEM0_(null)	(0x02 << 12)
+#define S3C64XX_GPP6_EINT_G8_6		(0x03 << 12)
+
+#define S3C64XX_GPP7_MEM0_INTsm1_FRE	(0x02 << 14)
+#define S3C64XX_GPP7_EINT_G8_7		(0x03 << 14)
+
+#define S3C64XX_GPP8_MEM0_RPn_RnB	(0x02 << 16)
+#define S3C64XX_GPP8_EINT_G8_8		(0x03 << 16)
+
+#define S3C64XX_GPP9_MEM0_ATA_RESET	(0x02 << 18)
+#define S3C64XX_GPP9_EINT_G8_9		(0x03 << 18)
+
+#define S3C64XX_GPP10_MEM0_ATA_INPACK	(0x02 << 20)
+#define S3C64XX_GPP10_EINT_G8_10	(0x03 << 20)
+
+#define S3C64XX_GPP11_MEM0_ATA_REG	(0x02 << 22)
+#define S3C64XX_GPP11_EINT_G8_11	(0x03 << 22)
+
+#define S3C64XX_GPP12_MEM0_ATA_WE	(0x02 << 24)
+#define S3C64XX_GPP12_EINT_G8_12	(0x03 << 24)
+
+#define S3C64XX_GPP13_MEM0_ATA_OE	(0x02 << 26)
+#define S3C64XX_GPP13_EINT_G8_13	(0x03 << 26)
+
+#define S3C64XX_GPP14_MEM0_ATA_CD	(0x02 << 28)
+#define S3C64XX_GPP14_EINT_G8_14	(0x03 << 28)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
new file mode 100644
index 000000000000..565e60aaee47
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
@@ -0,0 +1,46 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank Q register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPQCON			(S3C64XX_GPQ_BASE + 0x00)
+#define S3C64XX_GPQDAT			(S3C64XX_GPQ_BASE + 0x04)
+#define S3C64XX_GPQPUD			(S3C64XX_GPQ_BASE + 0x08)
+#define S3C64XX_GPQCONSLP		(S3C64XX_GPQ_BASE + 0x0c)
+#define S3C64XX_GPQPUDSLP		(S3C64XX_GPQ_BASE + 0x10)
+
+#define S3C64XX_GPQ_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPQ_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPQ_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPQ0_MEM0_ADDR18_RAS	(0x02 << 0)
+#define S3C64XX_GPQ0_EINT_G9_0		(0x03 << 0)
+
+#define S3C64XX_GPQ1_MEM0_ADDR19_CAS	(0x02 << 2)
+#define S3C64XX_GPQ1_EINT_G9_1		(0x03 << 2)
+
+#define S3C64XX_GPQ2_EINT_G9_2		(0x03 << 4)
+
+#define S3C64XX_GPQ3_EINT_G9_3		(0x03 << 6)
+
+#define S3C64XX_GPQ4_EINT_G9_4		(0x03 << 8)
+
+#define S3C64XX_GPQ5_EINT_G9_5		(0x03 << 10)
+
+#define S3C64XX_GPQ6_EINT_G9_6		(0x03 << 12)
+
+#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC	(0x02 << 14)
+#define S3C64XX_GPQ7_EINT_G9_7		(0x03 << 14)
+
+#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC	(0x02 << 16)
+#define S3C64XX_GPQ8_EINT_G9_8		(0x03 << 16)
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
new file mode 100644
index 000000000000..02e8dd4c97d5
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -0,0 +1,201 @@
+/* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Common IRQ support
+ */
+
+#ifndef __ASM_PLAT_S3C64XX_IRQS_H
+#define __ASM_PLAT_S3C64XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET	(32)
+
+#define S3C_IRQ(x)	((x) + S3C_IRQ_OFFSET)
+
+#define S3C_VIC0_BASE	S3C_IRQ(0)
+#define S3C_VIC1_BASE	S3C_IRQ(32)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0	(16)
+#define IRQ_S3CUART_BASE1	(20)
+#define IRQ_S3CUART_BASE2	(24)
+#define IRQ_S3CUART_BASE3	(28)
+
+#define UART_IRQ_RXD		(0)
+#define UART_IRQ_ERR		(1)
+#define UART_IRQ_TXD		(2)
+#define UART_IRQ_MODEM		(3)
+
+#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S3C64XX_IRQ_VIC0(x)	(S3C_VIC0_BASE + (x))
+#define S3C64XX_IRQ_VIC1(x)	(S3C_VIC1_BASE + (x))
+
+/* VIC0 */
+
+#define IRQ_EINT0_3		S3C64XX_IRQ_VIC0(0)
+#define IRQ_EINT4_11		S3C64XX_IRQ_VIC0(1)
+#define IRQ_RTC_TIC		S3C64XX_IRQ_VIC0(2)
+#define IRQ_CAMIF_C		S3C64XX_IRQ_VIC0(3)
+#define IRQ_CAMIF_P		S3C64XX_IRQ_VIC0(4)
+#define IRQ_CAMIF_MC		S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIC1	S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIS		S3C64XX_IRQ_VIC0(6)
+#define IRQ_S3C6400_CAMIF_MP	S3C64XX_IRQ_VIC0(6)
+#define IRQ_CAMIF_WE_C		S3C64XX_IRQ_VIC0(7)
+#define IRQ_S3C6410_G3D		S3C64XX_IRQ_VIC0(8)
+#define IRQ_S3C6400_CAMIF_WE_P	S3C64XX_IRQ_VIC0(8)
+#define IRQ_POST0		S3C64XX_IRQ_VIC0(9)
+#define IRQ_ROTATOR		S3C64XX_IRQ_VIC0(10)
+#define IRQ_2D			S3C64XX_IRQ_VIC0(11)
+#define IRQ_TVENC		S3C64XX_IRQ_VIC0(12)
+#define IRQ_SCALER		S3C64XX_IRQ_VIC0(13)
+#define IRQ_BATF		S3C64XX_IRQ_VIC0(14)
+#define IRQ_JPEG		S3C64XX_IRQ_VIC0(15)
+#define IRQ_MFC			S3C64XX_IRQ_VIC0(16)
+#define IRQ_SDMA0		S3C64XX_IRQ_VIC0(17)
+#define IRQ_SDMA1		S3C64XX_IRQ_VIC0(18)
+#define IRQ_ARM_DMAERR		S3C64XX_IRQ_VIC0(19)
+#define IRQ_ARM_DMA		S3C64XX_IRQ_VIC0(20)
+#define IRQ_ARM_DMAS		S3C64XX_IRQ_VIC0(21)
+#define IRQ_KEYPAD		S3C64XX_IRQ_VIC0(22)
+#define IRQ_TIMER0_VIC		S3C64XX_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC		S3C64XX_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC		S3C64XX_IRQ_VIC0(25)
+#define IRQ_WDT			S3C64XX_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC		S3C64XX_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC		S3C64XX_IRQ_VIC0(28)
+#define IRQ_LCD_FIFO		S3C64XX_IRQ_VIC0(29)
+#define IRQ_LCD_VSYNC		S3C64XX_IRQ_VIC0(30)
+#define IRQ_LCD_SYSTEM		S3C64XX_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_19		S3C64XX_IRQ_VIC1(0)
+#define IRQ_EINT20_27		S3C64XX_IRQ_VIC1(1)
+#define IRQ_PCM0		S3C64XX_IRQ_VIC1(2)
+#define IRQ_PCM1		S3C64XX_IRQ_VIC1(3)
+#define IRQ_AC97		S3C64XX_IRQ_VIC1(4)
+#define IRQ_UART0		S3C64XX_IRQ_VIC1(5)
+#define IRQ_UART1		S3C64XX_IRQ_VIC1(6)
+#define IRQ_UART2		S3C64XX_IRQ_VIC1(7)
+#define IRQ_UART3		S3C64XX_IRQ_VIC1(8)
+#define IRQ_DMA0		S3C64XX_IRQ_VIC1(9)
+#define IRQ_DMA1		S3C64XX_IRQ_VIC1(10)
+#define IRQ_ONENAND0		S3C64XX_IRQ_VIC1(11)
+#define IRQ_ONENAND1		S3C64XX_IRQ_VIC1(12)
+#define IRQ_NFC			S3C64XX_IRQ_VIC1(13)
+#define IRQ_CFCON		S3C64XX_IRQ_VIC1(14)
+#define IRQ_UHOST		S3C64XX_IRQ_VIC1(15)
+#define IRQ_SPI0		S3C64XX_IRQ_VIC1(16)
+#define IRQ_SPI1		S3C64XX_IRQ_VIC1(17)
+#define IRQ_IIC			S3C64XX_IRQ_VIC1(18)
+#define IRQ_HSItx		S3C64XX_IRQ_VIC1(19)
+#define IRQ_HSIrx		S3C64XX_IRQ_VIC1(20)
+#define IRQ_RESERVED		S3C64XX_IRQ_VIC1(21)
+#define IRQ_MSM			S3C64XX_IRQ_VIC1(22)
+#define IRQ_HOSTIF		S3C64XX_IRQ_VIC1(23)
+#define IRQ_HSMMC0		S3C64XX_IRQ_VIC1(24)
+#define IRQ_HSMMC1		S3C64XX_IRQ_VIC1(25)
+#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
+#define IRQ_OTG			S3C64XX_IRQ_VIC1(26)
+#define IRQ_IRDA		S3C64XX_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM		S3C64XX_IRQ_VIC1(28)
+#define IRQ_SEC			S3C64XX_IRQ_VIC1(29)
+#define IRQ_PENDN		S3C64XX_IRQ_VIC1(30)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_ADC			S3C64XX_IRQ_VIC1(31)
+
+#define S3C64XX_TIMER_IRQ(x)	S3C_IRQ(64 + (x))
+
+#define IRQ_TIMER0		S3C64XX_TIMER_IRQ(0)
+#define IRQ_TIMER1		S3C64XX_TIMER_IRQ(1)
+#define IRQ_TIMER2		S3C64XX_TIMER_IRQ(2)
+#define IRQ_TIMER3		S3C64XX_TIMER_IRQ(3)
+#define IRQ_TIMER4		S3C64XX_TIMER_IRQ(4)
+
+/* compatibility for device defines */
+
+#define IRQ_IIC1		IRQ_S3C6410_IIC1
+
+/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
+ * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
+ * which we place after the pair of VICs. */
+
+#define S3C_IRQ_EINT_BASE	S3C_IRQ(64+5)
+
+#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S3C_EINT(x)
+
+/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+#define IRQ_EINT_GROUP1_NR	(15)
+#define IRQ_EINT_GROUP2_NR	(8)
+#define IRQ_EINT_GROUP3_NR	(5)
+#define IRQ_EINT_GROUP4_NR	(14)
+#define IRQ_EINT_GROUP5_NR	(7)
+#define IRQ_EINT_GROUP6_NR	(10)
+#define IRQ_EINT_GROUP7_NR	(16)
+#define IRQ_EINT_GROUP8_NR	(15)
+#define IRQ_EINT_GROUP9_NR	(9)
+
+#define IRQ_EINT_GROUP_BASE	S3C_EINT(28)
+#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0x00)
+#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP3_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP4_BASE	(IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
+#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
+#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP7_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
+#define IRQ_EINT_GROUP9_BASE	(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
+
+#define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##__BASE + (x))
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS	(IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+#endif /* __ASM_PLAT_S3C64XX_IRQS_H */
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/pll.h b/arch/arm/plat-s3c64xx/include/plat/pll.h
new file mode 100644
index 000000000000..90bbd72fdc4e
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/pll.h
@@ -0,0 +1,74 @@
+/* arch/arm/plat-s3c64xx/include/plat/pll.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX PLL code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C6400_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
+#define S3C6400_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
+#define S3C6400_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
+#define S3C6400_PLL_MDIV_SHIFT	(16)
+#define S3C6400_PLL_PDIV_SHIFT	(8)
+#define S3C6400_PLL_SDIV_SHIFT	(0)
+
+#include <asm/div64.h>
+
+static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
+					    u32 pllcon)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
+	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
+	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define S3C6400_EPLL_MDIV_MASK	((1 << (23-16)) - 1)
+#define S3C6400_EPLL_PDIV_MASK	((1 << (13-8)) - 1)
+#define S3C6400_EPLL_SDIV_MASK	((1 << (2-0)) - 1)
+#define S3C6400_EPLL_MDIV_SHIFT	(16)
+#define S3C6400_EPLL_PDIV_SHIFT	(8)
+#define S3C6400_EPLL_SDIV_SHIFT	(0)
+#define S3C6400_EPLL_KDIV_MASK  (0xffff)
+
+static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
+{
+	unsigned long result;
+	u32 epll0 = __raw_readl(S3C_EPLL_CON0);
+	u32 epll1 = __raw_readl(S3C_EPLL_CON1);
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK;
+	pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK;
+	sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK;
+	kdiv = epll1 & S3C6400_EPLL_KDIV_MASK;
+
+	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
new file mode 100644
index 000000000000..b1082c163247
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
@@ -0,0 +1,224 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+#define S3C_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S3C_APLL_LOCK		S3C_CLKREG(0x00)
+#define S3C_MPLL_LOCK		S3C_CLKREG(0x04)
+#define S3C_EPLL_LOCK		S3C_CLKREG(0x08)
+#define S3C_APLL_CON		S3C_CLKREG(0x0C)
+#define S3C_MPLL_CON		S3C_CLKREG(0x10)
+#define S3C_EPLL_CON0		S3C_CLKREG(0x14)
+#define S3C_EPLL_CON1		S3C_CLKREG(0x18)
+#define S3C_CLK_SRC		S3C_CLKREG(0x1C)
+#define S3C_CLK_DIV0		S3C_CLKREG(0x20)
+#define S3C_CLK_DIV1		S3C_CLKREG(0x24)
+#define S3C_CLK_DIV2		S3C_CLKREG(0x28)
+#define S3C_CLK_OUT		S3C_CLKREG(0x2C)
+#define S3C_HCLK_GATE		S3C_CLKREG(0x30)
+#define S3C_PCLK_GATE		S3C_CLKREG(0x34)
+#define S3C_SCLK_GATE		S3C_CLKREG(0x38)
+
+/* CLKDIV0 */
+#define S3C6400_CLKDIV0_MFC_MASK	(0xf << 28)
+#define S3C6400_CLKDIV0_MFC_SHIFT	(28)
+#define S3C6400_CLKDIV0_JPEG_MASK	(0xf << 24)
+#define S3C6400_CLKDIV0_JPEG_SHIFT	(24)
+#define S3C6400_CLKDIV0_CAM_MASK	(0xf << 20)
+#define S3C6400_CLKDIV0_CAM_SHIFT	(20)
+#define S3C6400_CLKDIV0_SECURITY_MASK	(0x3 << 18)
+#define S3C6400_CLKDIV0_SECURITY_SHIFT	(18)
+#define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
+#define S3C6400_CLKDIV0_PCLK_SHIFT	(12)
+#define S3C6400_CLKDIV0_HCLK2_MASK	(0x7 << 9)
+#define S3C6400_CLKDIV0_HCLK2_SHIFT	(9)
+#define S3C6400_CLKDIV0_HCLK_MASK	(0x1 << 8)
+#define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
+#define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
+#define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
+#define S3C6400_CLKDIV0_ARM_MASK	(0x3 << 0)
+#define S3C6410_CLKDIV0_ARM_MASK	(0x7 << 0)
+#define S3C6400_CLKDIV0_ARM_SHIFT	(0)
+
+/* CLKDIV1 */
+#define S3C6410_CLKDIV1_FIMC_MASK	(0xf << 24)
+#define S3C6410_CLKDIV1_FIMC_SHIFT	(24)
+#define S3C6400_CLKDIV1_UHOST_MASK	(0xf << 20)
+#define S3C6400_CLKDIV1_UHOST_SHIFT	(20)
+#define S3C6400_CLKDIV1_SCALER_MASK	(0xf << 16)
+#define S3C6400_CLKDIV1_SCALER_SHIFT	(16)
+#define S3C6400_CLKDIV1_LCD_MASK	(0xf << 12)
+#define S3C6400_CLKDIV1_LCD_SHIFT	(12)
+#define S3C6400_CLKDIV1_MMC2_MASK	(0xf << 8)
+#define S3C6400_CLKDIV1_MMC2_SHIFT	(8)
+#define S3C6400_CLKDIV1_MMC1_MASK	(0xf << 4)
+#define S3C6400_CLKDIV1_MMC1_SHIFT	(4)
+#define S3C6400_CLKDIV1_MMC0_MASK	(0xf << 0)
+#define S3C6400_CLKDIV1_MMC0_SHIFT	(0)
+
+/* CLKDIV2 */
+#define S3C6410_CLKDIV2_AUDIO2_MASK	(0xf << 24)
+#define S3C6410_CLKDIV2_AUDIO2_SHIFT	(24)
+#define S3C6400_CLKDIV2_IRDA_MASK	(0xf << 20)
+#define S3C6400_CLKDIV2_IRDA_SHIFT	(20)
+#define S3C6400_CLKDIV2_UART_MASK	(0xf << 16)
+#define S3C6400_CLKDIV2_UART_SHIFT	(16)
+#define S3C6400_CLKDIV2_AUDIO1_MASK	(0xf << 12)
+#define S3C6400_CLKDIV2_AUDIO1_SHIFT	(12)
+#define S3C6400_CLKDIV2_AUDIO0_MASK	(0xf << 8)
+#define S3C6400_CLKDIV2_AUDIO0_SHIFT	(8)
+#define S3C6400_CLKDIV2_SPI1_MASK	(0xf << 4)
+#define S3C6400_CLKDIV2_SPI1_SHIFT	(4)
+#define S3C6400_CLKDIV2_SPI0_MASK	(0xf << 0)
+#define S3C6400_CLKDIV2_SPI0_SHIFT	(0)
+
+/* HCLK GATE Registers */
+#define S3C_CLKCON_HCLK_BUS	(1<<30)
+#define S3C_CLKCON_HCLK_SECUR	(1<<29)
+#define S3C_CLKCON_HCLK_SDMA1	(1<<28)
+#define S3C_CLKCON_HCLK_SDMA2	(1<<27)
+#define S3C_CLKCON_HCLK_UHOST	(1<<26)
+#define S3C_CLKCON_HCLK_IROM	(1<<25)
+#define S3C_CLKCON_HCLK_DDR1	(1<<24)
+#define S3C_CLKCON_HCLK_DDR0	(1<<23)
+#define S3C_CLKCON_HCLK_MEM1	(1<<22)
+#define S3C_CLKCON_HCLK_MEM0	(1<<21)
+#define S3C_CLKCON_HCLK_USB	(1<<20)
+#define S3C_CLKCON_HCLK_HSMMC2	(1<<19)
+#define S3C_CLKCON_HCLK_HSMMC1	(1<<18)
+#define S3C_CLKCON_HCLK_HSMMC0	(1<<17)
+#define S3C_CLKCON_HCLK_MDP	(1<<16)
+#define S3C_CLKCON_HCLK_DHOST	(1<<15)
+#define S3C_CLKCON_HCLK_IHOST	(1<<14)
+#define S3C_CLKCON_HCLK_DMA1	(1<<13)
+#define S3C_CLKCON_HCLK_DMA0	(1<<12)
+#define S3C_CLKCON_HCLK_JPEG	(1<<11)
+#define S3C_CLKCON_HCLK_CAMIF	(1<<10)
+#define S3C_CLKCON_HCLK_SCALER	(1<<9)
+#define S3C_CLKCON_HCLK_2D	(1<<8)
+#define S3C_CLKCON_HCLK_TV	(1<<7)
+#define S3C_CLKCON_HCLK_POST0	(1<<5)
+#define S3C_CLKCON_HCLK_ROT	(1<<4)
+#define S3C_CLKCON_HCLK_LCD	(1<<3)
+#define S3C_CLKCON_HCLK_TZIC	(1<<2)
+#define S3C_CLKCON_HCLK_INTC	(1<<1)
+#define S3C_CLKCON_HCLK_MFC	(1<<0)
+
+/* PCLK GATE Registers */
+#define S3C6410_CLKCON_PCLK_I2C1	(1<<27)
+#define S3C6410_CLKCON_PCLK_IIS2	(1<<26)
+#define S3C_CLKCON_PCLK_SKEY		(1<<24)
+#define S3C_CLKCON_PCLK_CHIPID		(1<<23)
+#define S3C_CLKCON_PCLK_SPI1		(1<<22)
+#define S3C_CLKCON_PCLK_SPI0		(1<<21)
+#define S3C_CLKCON_PCLK_HSIRX		(1<<20)
+#define S3C_CLKCON_PCLK_HSITX		(1<<19)
+#define S3C_CLKCON_PCLK_GPIO		(1<<18)
+#define S3C_CLKCON_PCLK_IIC		(1<<17)
+#define S3C_CLKCON_PCLK_IIS1		(1<<16)
+#define S3C_CLKCON_PCLK_IIS0		(1<<15)
+#define S3C_CLKCON_PCLK_AC97		(1<<14)
+#define S3C_CLKCON_PCLK_TZPC		(1<<13)
+#define S3C_CLKCON_PCLK_TSADC		(1<<12)
+#define S3C_CLKCON_PCLK_KEYPAD		(1<<11)
+#define S3C_CLKCON_PCLK_IRDA		(1<<10)
+#define S3C_CLKCON_PCLK_PCM1		(1<<9)
+#define S3C_CLKCON_PCLK_PCM0		(1<<8)
+#define S3C_CLKCON_PCLK_PWM		(1<<7)
+#define S3C_CLKCON_PCLK_RTC		(1<<6)
+#define S3C_CLKCON_PCLK_WDT		(1<<5)
+#define S3C_CLKCON_PCLK_UART3		(1<<4)
+#define S3C_CLKCON_PCLK_UART2		(1<<3)
+#define S3C_CLKCON_PCLK_UART1		(1<<2)
+#define S3C_CLKCON_PCLK_UART0		(1<<1)
+#define S3C_CLKCON_PCLK_MFC		(1<<0)
+
+/* SCLK GATE Registers */
+#define S3C_CLKCON_SCLK_UHOST		(1<<30)
+#define S3C_CLKCON_SCLK_MMC2_48		(1<<29)
+#define S3C_CLKCON_SCLK_MMC1_48		(1<<28)
+#define S3C_CLKCON_SCLK_MMC0_48		(1<<27)
+#define S3C_CLKCON_SCLK_MMC2		(1<<26)
+#define S3C_CLKCON_SCLK_MMC1		(1<<25)
+#define S3C_CLKCON_SCLK_MMC0		(1<<24)
+#define S3C_CLKCON_SCLK_SPI1_48 	(1<<23)
+#define S3C_CLKCON_SCLK_SPI0_48 	(1<<22)
+#define S3C_CLKCON_SCLK_SPI1		(1<<21)
+#define S3C_CLKCON_SCLK_SPI0		(1<<20)
+#define S3C_CLKCON_SCLK_DAC27		(1<<19)
+#define S3C_CLKCON_SCLK_TV27		(1<<18)
+#define S3C_CLKCON_SCLK_SCALER27	(1<<17)
+#define S3C_CLKCON_SCLK_SCALER		(1<<16)
+#define S3C_CLKCON_SCLK_LCD27		(1<<15)
+#define S3C_CLKCON_SCLK_LCD		(1<<14)
+#define S3C6400_CLKCON_SCLK_POST1_27	(1<<13)
+#define S3C6410_CLKCON_FIMC		(1<<13)
+#define S3C_CLKCON_SCLK_POST0_27	(1<<12)
+#define S3C6400_CLKCON_SCLK_POST1	(1<<11)
+#define S3C6410_CLKCON_SCLK_AUDIO2	(1<<11)
+#define S3C_CLKCON_SCLK_POST0		(1<<10)
+#define S3C_CLKCON_SCLK_AUDIO1		(1<<9)
+#define S3C_CLKCON_SCLK_AUDIO0		(1<<8)
+#define S3C_CLKCON_SCLK_SECUR		(1<<7)
+#define S3C_CLKCON_SCLK_IRDA		(1<<6)
+#define S3C_CLKCON_SCLK_UART		(1<<5)
+#define S3C_CLKCON_SCLK_ONENAND 	(1<<4)
+#define S3C_CLKCON_SCLK_MFC		(1<<3)
+#define S3C_CLKCON_SCLK_CAM		(1<<2)
+#define S3C_CLKCON_SCLK_JPEG		(1<<1)
+
+/* CLKSRC */
+
+#define S3C6400_CLKSRC_APLL_MOUT	(1 << 0)
+#define S3C6400_CLKSRC_MPLL_MOUT	(1 << 1)
+#define S3C6400_CLKSRC_EPLL_MOUT	(1 << 2)
+#define S3C6400_CLKSRC_APLL_MOUT_SHIFT	(0)
+#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT	(1)
+#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
+#define S3C6400_CLKSRC_MFC		(1 << 4)
+
+#define S3C6410_CLKSRC_TV27_MASK	(0x1 << 31)
+#define S3C6410_CLKSRC_TV27_SHIFT	(31)
+#define S3C6410_CLKSRC_DAC27_MASK	(0x1 << 30)
+#define S3C6410_CLKSRC_DAC27_SHIFT	(30)
+#define S3C6400_CLKSRC_SCALER_MASK	(0x3 << 28)
+#define S3C6400_CLKSRC_SCALER_SHIFT	(28)
+#define S3C6400_CLKSRC_LCD_MASK		(0x3 << 26)
+#define S3C6400_CLKSRC_LCD_SHIFT	(26)
+#define S3C6400_CLKSRC_IRDA_MASK	(0x3 << 24)
+#define S3C6400_CLKSRC_IRDA_SHIFT	(24)
+#define S3C6400_CLKSRC_MMC2_MASK	(0x3 << 22)
+#define S3C6400_CLKSRC_MMC2_SHIFT	(22)
+#define S3C6400_CLKSRC_MMC1_MASK	(0x3 << 20)
+#define S3C6400_CLKSRC_MMC1_SHIFT	(20)
+#define S3C6400_CLKSRC_MMC0_MASK	(0x3 << 18)
+#define S3C6400_CLKSRC_MMC0_SHIFT	(18)
+#define S3C6400_CLKSRC_SPI1_MASK	(0x3 << 16)
+#define S3C6400_CLKSRC_SPI1_SHIFT	(16)
+#define S3C6400_CLKSRC_SPI0_MASK	(0x3 << 14)
+#define S3C6400_CLKSRC_SPI0_SHIFT	(14)
+#define S3C6400_CLKSRC_UART_MASK	(0x1 << 13)
+#define S3C6400_CLKSRC_UART_SHIFT	(13)
+#define S3C6400_CLKSRC_AUDIO1_MASK	(0x7 << 10)
+#define S3C6400_CLKSRC_AUDIO1_SHIFT	(10)
+#define S3C6400_CLKSRC_AUDIO0_MASK	(0x7 << 7)
+#define S3C6400_CLKSRC_AUDIO0_SHIFT	(7)
+#define S3C6400_CLKSRC_UHOST_MASK	(0x3 << 5)
+#define S3C6400_CLKSRC_UHOST_SHIFT	(5)
+
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
new file mode 100644
index 000000000000..75b873d82808
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
@@ -0,0 +1,35 @@
+/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H
+#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__
+
+/* Base addresses for each of the banks */
+
+#define S3C64XX_GPA_BASE	(S3C64XX_VA_GPIO + 0x0000)
+#define S3C64XX_GPB_BASE	(S3C64XX_VA_GPIO + 0x0020)
+#define S3C64XX_GPC_BASE	(S3C64XX_VA_GPIO + 0x0040)
+#define S3C64XX_GPD_BASE	(S3C64XX_VA_GPIO + 0x0060)
+#define S3C64XX_GPE_BASE	(S3C64XX_VA_GPIO + 0x0080)
+#define S3C64XX_GPF_BASE	(S3C64XX_VA_GPIO + 0x00A0)
+#define S3C64XX_GPG_BASE	(S3C64XX_VA_GPIO + 0x00C0)
+#define S3C64XX_GPH_BASE	(S3C64XX_VA_GPIO + 0x00E0)
+#define S3C64XX_GPI_BASE	(S3C64XX_VA_GPIO + 0x0100)
+#define S3C64XX_GPJ_BASE	(S3C64XX_VA_GPIO + 0x0120)
+#define S3C64XX_GPK_BASE	(S3C64XX_VA_GPIO + 0x0800)
+#define S3C64XX_GPL_BASE	(S3C64XX_VA_GPIO + 0x0810)
+#define S3C64XX_GPM_BASE	(S3C64XX_VA_GPIO + 0x0820)
+#define S3C64XX_GPN_BASE	(S3C64XX_VA_GPIO + 0x0830)
+#define S3C64XX_GPO_BASE	(S3C64XX_VA_GPIO + 0x0140)
+#define S3C64XX_GPP_BASE	(S3C64XX_VA_GPIO + 0x0160)
+#define S3C64XX_GPQ_BASE	(S3C64XX_VA_GPIO + 0x0180)
+
+#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h b/arch/arm/plat-s3c64xx/include/plat/regs-sys.h
new file mode 100644
index 000000000000..d8ed82917096
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-sys.h
@@ -0,0 +1,24 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX system register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_SYS_H
+#define __PLAT_REGS_SYS_H __FILE__
+
+#define S3C_SYSREG(x)		(S3C_VA_SYS + (x))
+
+#define S3C64XX_OTHERS		S3C_SYSREG(0x900)
+
+#define S3C64XX_OTHERS_USBMASK	(1 << 16)
+
+#endif /* _PLAT_REGS_SYS_H */
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
new file mode 100644
index 000000000000..571eaa2e54f1
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
@@ -0,0 +1,35 @@
+/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Header file for s3c6400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S3C6400 related SoCs */
+
+extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c6400_register_clocks(void);
+extern void s3c6400_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S3C6400
+
+extern  int s3c6400_init(void);
+extern void s3c6400_map_io(void);
+extern void s3c6400_init_clocks(int xtal);
+
+#define s3c6400_init_uarts s3c6400_common_init_uarts
+
+#else
+#define s3c6400_init_clocks NULL
+#define s3c6400_init_uarts NULL
+#define s3c6400_map_io NULL
+#define s3c6400_init NULL
+#endif
+
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h b/arch/arm/plat-s3c64xx/include/plat/s3c6410.h
new file mode 100644
index 000000000000..50dcdd6f6800
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/s3c6410.h
@@ -0,0 +1,29 @@
+/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+ *
+ * Copyright 2008 Openmoko,  Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Header file for s3c6410 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C6410
+
+extern  int s3c6410_init(void);
+extern void s3c6410_init_irq(void);
+extern void s3c6410_map_io(void);
+extern void s3c6410_init_clocks(int xtal);
+
+#define s3c6410_init_uarts s3c6400_common_init_uarts
+
+#else
+#define s3c6410_init_clocks NULL
+#define s3c6410_init_uarts NULL
+#define s3c6410_map_io NULL
+#define s3c6410_init NULL
+#endif
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
new file mode 100644
index 000000000000..1f7cc0067f5c
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -0,0 +1,202 @@
+/* arch/arm/plat-s3c64xx/irq-eint.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling for IRQ_EINT(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <plat/regs-irqtype.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+
+/* GPIO is 0x7F008xxx, */
+#define S3C64XX_GPIOREG(x)	(S3C64XX_VA_GPIO + (x))
+
+#define S3C64XX_EINT0CON0	S3C64XX_GPIOREG(0x900)
+#define S3C64XX_EINT0CON1	S3C64XX_GPIOREG(0x904)
+#define S3C64XX_EINT0FLTCON0	S3C64XX_GPIOREG(0x910)
+#define S3C64XX_EINT0FLTCON1	S3C64XX_GPIOREG(0x914)
+#define S3C64XX_EINT0FLTCON2	S3C64XX_GPIOREG(0x918)
+#define S3C64XX_EINT0FLTCON3	S3C64XX_GPIOREG(0x91C)
+
+#define S3C64XX_EINT0MASK	S3C64XX_GPIOREG(0x920)
+#define S3C64XX_EINT0PEND	S3C64XX_GPIOREG(0x924)
+
+
+#define eint_offset(irq)	((irq) - IRQ_EINT(0))
+#define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
+
+static inline void s3c_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask |= eint_irq_to_bit(irq);
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static void s3c_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask |= eint_irq_to_bit(irq);
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static inline void s3c_irq_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S3C64XX_EINT0PEND);
+}
+
+static void s3c_irq_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s3c_irq_eint_mask(irq);
+	s3c_irq_eint_ack(irq);
+}
+
+static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	int offs = eint_offset(irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+	void __iomem *reg;
+
+	if (offs > 27)
+		return -EINVAL;
+
+	if (offs <= 15)
+		reg = S3C64XX_EINT0CON0;
+	else
+		reg = S3C64XX_EINT0CON1;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S3C2410_EXTINT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S3C2410_EXTINT_FALLEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S3C2410_EXTINT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S3C2410_EXTINT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S3C2410_EXTINT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -1;
+	}
+
+	shift = (offs / 2) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(reg);
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, reg);
+
+	return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+	.name		= "s3c-eint",
+	.mask		= s3c_irq_eint_mask,
+	.unmask		= s3c_irq_eint_unmask,
+	.mask_ack	= s3c_irq_eint_maskack,
+	.ack		= s3c_irq_eint_ack,
+	.set_type	= s3c_irq_eint_set_type,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S3C64XX_EINT0PEND);
+	u32 mask = __raw_readl(S3C64XX_EINT0MASK);
+	unsigned int irq;
+
+	status &= ~mask;
+	status >>= start;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+
+		status >>= 1;
+	}
+}
+
+static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(0, 3);
+}
+
+static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(4, 11);
+}
+
+static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(12, 19);
+}
+
+static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(20, 27);
+}
+
+int __init s3c64xx_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
+		set_irq_chip(irq, &s3c_irq_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
+	set_irq_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
+	set_irq_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
+	set_irq_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
+
+	return 0;
+}
+
+arch_initcall(s3c64xx_init_irq_eint);
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
new file mode 100644
index 000000000000..a94f1d5e819d
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/irq.c
@@ -0,0 +1,257 @@
+/* arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+
+/* Timer interrupt handling */
+
+static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
+{
+	generic_handle_irq(sub_irq);
+}
+
+static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER0);
+}
+
+static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER1);
+}
+
+static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER2);
+}
+
+static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER3);
+}
+
+static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER4);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg &= ~(1 << (irq - IRQ_TIMER0));
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg |= 1 << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;
+	reg |= (1 << 5) << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+	.name		= "s3c-timer",
+	.mask		= s3c_irq_timer_mask,
+	.unmask		= s3c_irq_timer_unmask,
+	.ack		= s3c_irq_timer_ack,
+};
+
+struct uart_irq {
+	void __iomem	*regs;
+	unsigned int	 base_irq;
+	unsigned int	 parent_irq;
+};
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct uart_irq uart_irqs[] = {
+	[0] = {
+		.regs		= S3C_VA_UART0,
+		.base_irq	= IRQ_S3CUART_BASE0,
+		.parent_irq	= IRQ_UART0,
+	},
+	[1] = {
+		.regs		= S3C_VA_UART1,
+		.base_irq	= IRQ_S3CUART_BASE1,
+		.parent_irq	= IRQ_UART1,
+	},
+	[2] = {
+		.regs		= S3C_VA_UART2,
+		.base_irq	= IRQ_S3CUART_BASE2,
+		.parent_irq	= IRQ_UART2,
+	},
+	[3] = {
+		.regs		= S3C_VA_UART3,
+		.base_irq	= IRQ_S3CUART_BASE3,
+		.parent_irq	= IRQ_UART3,
+	},
+};
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+	struct uart_irq *uirq = get_irq_chip_data(irq);
+	return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+	return irq & 3;
+}
+
+/* UART interrupt registers, not worth adding to seperate include header */
+#define S3C64XX_UINTP	0x30
+#define S3C64XX_UINTSP	0x34
+#define S3C64XX_UINTM	0x38
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg &= ~(1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+	struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
+	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+	int base = uirq->base_irq;
+
+	if (pend & (1 << 0))
+		generic_handle_irq(base);
+	if (pend & (1 << 1))
+		generic_handle_irq(base + 1);
+	if (pend & (1 << 2))
+		generic_handle_irq(base + 2);
+	if (pend & (1 << 3))
+		generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+	.name		= "s3c-uart",
+	.mask		= s3c_irq_uart_mask,
+	.unmask		= s3c_irq_uart_unmask,
+	.mask_ack	= s3c_irq_uart_maskack,
+	.ack		= s3c_irq_uart_ack,
+};
+
+static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
+{
+	void *reg_base = uirq->regs;
+	unsigned int irq;
+	int offs;
+
+	/* mask all interrupts at the start. */
+	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+	for (offs = 0; offs < 3; offs++) {
+		irq = uirq->base_irq + offs;
+
+		set_irq_chip(irq, &s3c_irq_uart);
+		set_irq_chip_data(irq, uirq);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+	int uart, irq;
+
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid);
+	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid);
+
+	/* add the timer sub-irqs */
+
+	set_irq_chained_handler(IRQ_TIMER0_VIC, s3c_irq_demux_timer0);
+	set_irq_chained_handler(IRQ_TIMER1_VIC, s3c_irq_demux_timer1);
+	set_irq_chained_handler(IRQ_TIMER2_VIC, s3c_irq_demux_timer2);
+	set_irq_chained_handler(IRQ_TIMER3_VIC, s3c_irq_demux_timer3);
+	set_irq_chained_handler(IRQ_TIMER4_VIC, s3c_irq_demux_timer4);
+
+	for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
+		set_irq_chip(irq, &s3c_irq_timer);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
+		s3c64xx_uart_irq(&uart_irqs[uart]);
+}
+
+
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
new file mode 100644
index 000000000000..8d9a0cada668
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -0,0 +1,655 @@
+/* linux/arch/arm/plat-s3c64xx/s3c6400-clock.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 based common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+
+#define clk_fout_mpll	clk_mpll
+
+struct clk_sources {
+	unsigned int	nr_sources;
+	struct clk	**sources;
+};
+
+struct clksrc_clk {
+	struct clk		clk;
+	unsigned int		mask;
+	unsigned int		shift;
+
+	struct clk_sources	*sources;
+
+	unsigned int		divider_shift;
+	void __iomem		*reg_divider;
+};
+
+struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.shift		= S3C6400_CLKSRC_APLL_MOUT_SHIFT,
+	.mask		= S3C6400_CLKSRC_APLL_MOUT,
+	.sources	= &clk_src_apll,
+};
+
+struct clk clk_fout_epll = {
+	.name		= "fout_epll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+static struct clk_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.shift		= S3C6400_CLKSRC_EPLL_MOUT_SHIFT,
+	.mask		= S3C6400_CLKSRC_EPLL_MOUT,
+	.sources	= &clk_src_epll,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.shift		= S3C6400_CLKSRC_MPLL_MOUT_SHIFT,
+	.mask		= S3C6400_CLKSRC_MPLL_MOUT,
+	.sources	= &clk_src_mpll,
+};
+
+static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
+		rate /= 2;
+
+	return rate;
+}
+
+struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
+};
+
+static struct clk *clkset_spi_mmc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_27m,
+};
+
+static struct clk_sources clkset_spi_mmc = {
+	.sources	= clkset_spi_mmc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
+};
+
+static struct clk *clkset_irda_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	&clk_27m,
+};
+
+static struct clk_sources clkset_irda = {
+	.sources	= clkset_irda_list,
+	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	NULL
+};
+
+static struct clk_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_uhost_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_48m,
+};
+
+static struct clk_sources clkset_uhost = {
+	.sources	= clkset_uhost_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
+};
+
+
+/* The peripheral clocks are all controlled via clocksource followed
+ * by an optional divider and gate stage. We currently roll this into
+ * one clock which hides the intermediate clock from the mux.
+ *
+ * Note, the JPEG clock can only be an even divider...
+ *
+ * The scaler and LCD clocks depend on the S3C64XX version, and also
+ * have a common parent divisor so are not included here.
+ */
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+	return container_of(clk, struct clksrc_clk, clk);
+}
+
+static unsigned long s3c64xx_getrate_clksrc(struct clk *clk)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv = __raw_readl(sclk->reg_divider);
+
+	clkdiv >>= sclk->divider_shift;
+	clkdiv &= 0xf;
+	clkdiv++;
+
+	rate /= clkdiv;
+	return rate;
+}
+
+static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	void __iomem *reg = sclk->reg_divider;
+	unsigned int div;
+	u32 val;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+
+	val = __raw_readl(reg);
+	val &= ~sclk->mask;
+	val |= (rate - 1) << sclk->shift;
+	__raw_writel(val, reg);
+
+	return 0;
+}
+
+static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	struct clk_sources *srcs = sclk->sources;
+	u32 clksrc = __raw_readl(S3C_CLK_SRC);
+	int src_nr = -1;
+	int ptr;
+
+	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+		if (srcs->sources[ptr] == parent) {
+			src_nr = ptr;
+			break;
+		}
+
+	if (src_nr >= 0) {
+		clksrc &= ~sclk->mask;
+		clksrc |= src_nr << sclk->shift;
+
+		__raw_writel(clksrc, S3C_CLK_SRC);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int div;
+
+	if (rate > parent_rate)
+		rate = parent_rate;
+	else {
+		div = rate / parent_rate;
+
+		if (div == 0)
+			div = 1;
+		if (div > 16)
+			div = 16;
+
+		rate = parent_rate / div;
+	}
+
+	return rate;
+}
+
+static struct clksrc_clk clk_mmc0 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 0,
+		.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
+		.enable		= s3c64xx_sclk_ctrl,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= S3C6400_CLKSRC_MMC0_SHIFT,
+	.mask		= S3C6400_CLKSRC_MMC0_MASK,
+	.sources	= &clkset_spi_mmc,
+	.divider_shift	= S3C6400_CLKDIV1_MMC0_SHIFT,
+	.reg_divider	= S3C_CLK_DIV1,
+};
+
+static struct clksrc_clk clk_mmc1 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 1,
+		.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
+		.enable		= s3c64xx_sclk_ctrl,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= S3C6400_CLKSRC_MMC1_SHIFT,
+	.mask		= S3C6400_CLKSRC_MMC1_MASK,
+	.sources	= &clkset_spi_mmc,
+	.divider_shift	= S3C6400_CLKDIV1_MMC1_SHIFT,
+	.reg_divider	= S3C_CLK_DIV1,
+};
+
+static struct clksrc_clk clk_mmc2 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 2,
+		.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
+		.enable		= s3c64xx_sclk_ctrl,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= S3C6400_CLKSRC_MMC2_SHIFT,
+	.mask		= S3C6400_CLKSRC_MMC2_MASK,
+	.sources	= &clkset_spi_mmc,
+	.divider_shift	= S3C6400_CLKDIV1_MMC2_SHIFT,
+	.reg_divider	= S3C_CLK_DIV1,
+};
+
+static struct clksrc_clk clk_usbhost = {
+	.clk	= {
+		.name		= "usb-host-bus",
+		.id		= -1,
+		.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
+		.enable		= s3c64xx_sclk_ctrl,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= S3C6400_CLKSRC_UHOST_SHIFT,
+	.mask		= S3C6400_CLKSRC_UHOST_MASK,
+	.sources	= &clkset_uhost,
+	.divider_shift	= S3C6400_CLKDIV1_UHOST_SHIFT,
+	.reg_divider	= S3C_CLK_DIV1,
+};
+
+static struct clksrc_clk clk_uart_uclk1 = {
+	.clk	= {
+		.name		= "uclk1",
+		.id		= -1,
+		.ctrlbit        = S3C_CLKCON_SCLK_UART,
+		.enable		= s3c64xx_sclk_ctrl,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= S3C6400_CLKSRC_UART_SHIFT,
+	.mask		= S3C6400_CLKSRC_UART_MASK,
+	.sources	= &clkset_uart,
+	.divider_shift	= S3C6400_CLKDIV2_UART_SHIFT,
+	.reg_divider	= S3C_CLK_DIV2,
+};
+
+/* Where does UCLK0 come from? */
+
+static struct clksrc_clk clk_spi0 = {
+	.clk	= {
+		.name		= "spi-bus",
+		.id		= 0,
+		.ctrlbit        = S3C_CLKCON_SCLK_SPI0,
+		.enable		= s3c64xx_sclk_ctrl,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= S3C6400_CLKSRC_SPI0_SHIFT,
+	.mask		= S3C6400_CLKSRC_SPI0_MASK,
+	.sources	= &clkset_spi_mmc,
+	.divider_shift	= S3C6400_CLKDIV2_SPI0_SHIFT,
+	.reg_divider	= S3C_CLK_DIV2,
+};
+
+static struct clksrc_clk clk_spi1 = {
+	.clk	= {
+		.name		= "spi-bus",
+		.id		= 1,
+		.ctrlbit        = S3C_CLKCON_SCLK_SPI1,
+		.enable		= s3c64xx_sclk_ctrl,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= S3C6400_CLKSRC_SPI1_SHIFT,
+	.mask		= S3C6400_CLKSRC_SPI1_MASK,
+	.sources	= &clkset_spi_mmc,
+	.divider_shift	= S3C6400_CLKDIV2_SPI1_SHIFT,
+	.reg_divider	= S3C_CLK_DIV2,
+};
+
+static struct clk clk_iis_cd0 = {
+	.name		= "iis_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_iis_cd1 = {
+	.name		= "iis_cdclk1",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd = {
+	.name		= "pcm_cdclk",
+	.id		= -1,
+};
+
+static struct clk *clkset_audio0_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_dout_mpll,
+	[2] = &clk_fin_epll,
+	[3] = &clk_iis_cd0,
+	[4] = &clk_pcm_cd,
+};
+
+static struct clk_sources clkset_audio0 = {
+	.sources	= clkset_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
+};
+
+static struct clksrc_clk clk_audio0 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 0,
+		.ctrlbit        = S3C_CLKCON_SCLK_AUDIO0,
+		.enable		= s3c64xx_sclk_ctrl,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= S3C6400_CLKSRC_AUDIO0_SHIFT,
+	.mask		= S3C6400_CLKSRC_AUDIO0_MASK,
+	.sources	= &clkset_audio0,
+	.divider_shift	= S3C6400_CLKDIV2_AUDIO0_SHIFT,
+	.reg_divider	= S3C_CLK_DIV2,
+};
+
+static struct clk *clkset_audio1_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_dout_mpll,
+	[2] = &clk_fin_epll,
+	[3] = &clk_iis_cd1,
+	[4] = &clk_pcm_cd,
+};
+
+static struct clk_sources clkset_audio1 = {
+	.sources	= clkset_audio1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
+};
+
+static struct clksrc_clk clk_audio1 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 1,
+		.ctrlbit        = S3C_CLKCON_SCLK_AUDIO1,
+		.enable		= s3c64xx_sclk_ctrl,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= S3C6400_CLKSRC_AUDIO1_SHIFT,
+	.mask		= S3C6400_CLKSRC_AUDIO1_MASK,
+	.sources	= &clkset_audio1,
+	.divider_shift	= S3C6400_CLKDIV2_AUDIO1_SHIFT,
+	.reg_divider	= S3C_CLK_DIV2,
+};
+
+static struct clksrc_clk clk_irda = {
+	.clk	= {
+		.name		= "irda-bus",
+		.id		= 0,
+		.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
+		.enable		= s3c64xx_sclk_ctrl,
+		.set_parent	= s3c64xx_setparent_clksrc,
+		.get_rate	= s3c64xx_getrate_clksrc,
+		.set_rate	= s3c64xx_setrate_clksrc,
+		.round_rate	= s3c64xx_roundrate_clksrc,
+	},
+	.shift		= S3C6400_CLKSRC_IRDA_SHIFT,
+	.mask		= S3C6400_CLKSRC_IRDA_MASK,
+	.sources	= &clkset_irda,
+	.divider_shift	= S3C6400_CLKDIV2_IRDA_SHIFT,
+	.reg_divider	= S3C_CLK_DIV2,
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_mmc0,
+	&clk_mmc1,
+	&clk_mmc2,
+	&clk_usbhost,
+	&clk_uart_uclk1,
+	&clk_spi0,
+	&clk_spi1,
+	&clk_audio0,
+	&clk_audio1,
+	&clk_irda,
+};
+
+static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
+{
+	struct clk_sources *srcs = clk->sources;
+	u32 clksrc = __raw_readl(S3C_CLK_SRC);
+
+	clksrc &= clk->mask;
+	clksrc >>= clk->shift;
+
+	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+		printk(KERN_ERR "%s: bad source %d\n",
+		       clk->clk.name, clksrc);
+		return;
+	}
+
+	clk->clk.parent = srcs->sources[clksrc];
+
+	printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+	       clk->clk.name, clk->clk.parent->name, clksrc,
+	       clk_get_rate(&clk->clk));
+}
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s3c6400_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk2;
+	unsigned long pclk;
+	unsigned long epll;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned int ptr;
+	u32 clkdiv0;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	epll = s3c6400_get_epll(xtal);
+	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
+	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
+
+	fclk = mpll;
+
+	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
+	       apll, mpll, epll);
+
+	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
+	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
+
+	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
+	       hclk2, hclk, pclk);
+
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_apll.rate = apll;
+
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+	clk_f.rate = fclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s3c6400_set_clksrc(init_parents[ptr]);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_iis_cd0,
+	&clk_iis_cd1,
+	&clk_pcm_cd,
+	&clk_mout_epll.clk,
+	&clk_fout_epll,
+	&clk_mout_mpll.clk,
+	&clk_dout_mpll,
+	&clk_mmc0.clk,
+	&clk_mmc1.clk,
+	&clk_mmc2.clk,
+	&clk_usbhost.clk,
+	&clk_uart_uclk1.clk,
+	&clk_spi0.clk,
+	&clk_spi1.clk,
+	&clk_audio0.clk,
+	&clk_audio1.clk,
+	&clk_irda.clk,
+};
+
+void __init s3c6400_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+		clkp = clks[ptr];
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clk_mpll.parent = &clk_mout_mpll.clk;
+	clk_epll.parent = &clk_mout_epll.clk;
+}
diff --git a/arch/arm/plat-s3c64xx/s3c6400-init.c b/arch/arm/plat-s3c64xx/s3c6400-init.c
new file mode 100644
index 000000000000..6c28f39df097
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/s3c6400-init.c
@@ -0,0 +1,29 @@
+/* linux/arch/arm/plat-s3c64xx/s3c6400-init.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - CPU initialisation (common with other S3C64XX chips)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s3c6400.h>
+#include <plat/s3c6410.h>
+
+/* uart registration process */
+
+void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
diff --git a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c b/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
new file mode 100644
index 000000000000..8e28e448dd20
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+
+#include <mach/regs-fb.h>
+#include <mach/gpio.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+extern void s3c64xx_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio;
+
+	for (gpio = S3C64XX_GPI(0); gpio <= S3C64XX_GPI(15); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S3C64XX_GPJ(0); gpio <= S3C64XX_GPJ(11); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/plat-s3c64xx/setup-i2c0.c b/arch/arm/plat-s3c64xx/setup-i2c0.c
new file mode 100644
index 000000000000..364480763728
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-i2c0.c
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c0.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX I2C bus 0 gpio configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-bank-b.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0);
+	s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0);
+	s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/plat-s3c64xx/setup-i2c1.c b/arch/arm/plat-s3c64xx/setup-i2c1.c
new file mode 100644
index 000000000000..bbe229bd90ca
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-i2c1.c
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX I2C bus 1 gpio configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-bank-b.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1);
+	s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1);
+	s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 43aa2020f85c..fd23c0e9e698 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Sep 25 10:10:50 2008
+# Last update: Sun Nov 30 16:39:36 2008
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1380,7 +1380,7 @@ holon			MACH_HOLON		HOLON			1377
 olip8			MACH_OLIP8		OLIP8			1378
 ghi270hg		MACH_GHI270HG		GHI270HG		1379
 davinci_dm6467_evm	MACH_DAVINCI_DM6467_EVM	DAVINCI_DM6467_EVM	1380
-davinci_dm355_evm	MACH_DAVINCI_DM350_EVM	DAVINCI_DM350_EVM	1381
+davinci_dm355_evm	MACH_DAVINCI_DM355_EVM	DAVINCI_DM355_EVM	1381
 blackriver		MACH_BLACKRIVER		BLACKRIVER		1383
 sandgate_wp		MACH_SANDGATEWP		SANDGATEWP		1384
 cdotbwsg		MACH_CDOTBWSG		CDOTBWSG		1385
@@ -1771,7 +1771,7 @@ axs_ultrax		MACH_AXS_ULTRAX		AXS_ULTRAX		1779
 at572d940deb		MACH_AT572D940DEB	AT572D940DEB		1780
 davinci_da8xx_evm	MACH_DAVINCI_DA8XX_EVM	DAVINCI_DA8XX_EVM	1781
 ep9302			MACH_EP9302		EP9302			1782
-at572d940hfeb		MACH_AT572D940HFEB	AT572D940HFEB		1783
+at572d940hfek		MACH_AT572D940HFEB	AT572D940HFEB		1783
 cybook3			MACH_CYBOOK3		CYBOOK3			1784
 wdg002			MACH_WDG002		WDG002			1785
 sg560adsl		MACH_SG560ADSL		SG560ADSL		1786
@@ -1899,3 +1899,98 @@ rut100			MACH_RUT100		RUT100			1908
 asusp535		MACH_ASUSP535		ASUSP535		1909
 htcraphael		MACH_HTCRAPHAEL		HTCRAPHAEL		1910
 sygdg1			MACH_SYGDG1		SYGDG1			1911
+sygdg2			MACH_SYGDG2		SYGDG2			1912
+seoul			MACH_SEOUL		SEOUL			1913
+salerno			MACH_SALERNO		SALERNO			1914
+ucn_s3c64xx		MACH_UCN_S3C64XX	UCN_S3C64XX		1915
+msm7201a		MACH_MSM7201A		MSM7201A		1916
+lpr1			MACH_LPR1		LPR1			1917
+armadillo500fx		MACH_ARMADILLO500FX	ARMADILLO500FX		1918
+g3evm			MACH_G3EVM		G3EVM			1919
+z3_dm355		MACH_Z3_DM355		Z3_DM355		1920
+w90p910evb		MACH_W90P910EVB		W90P910EVB		1921
+w90p920evb		MACH_W90P920EVB		W90P920EVB		1922
+w90p950evb		MACH_W90P950EVB		W90P950EVB		1923
+w90n960evb		MACH_W90N960EVB		W90N960EVB		1924
+camhd			MACH_CAMHD		CAMHD			1925
+mvc100			MACH_MVC100		MVC100			1926
+electrum_200		MACH_ELECTRUM_200	ELECTRUM_200		1927
+htcjade			MACH_HTCJADE		HTCJADE			1928
+memphis			MACH_MEMPHIS		MEMPHIS			1929
+imx27sbc		MACH_IMX27SBC		IMX27SBC		1930
+lextar			MACH_LEXTAR		LEXTAR			1931
+mv88f6281gtw_ge		MACH_MV88F6281GTW_GE	MV88F6281GTW_GE		1932
+ncp			MACH_NCP		NCP			1933
+z32an_series		MACH_Z32AN		Z32AN			1934
+tmq_capd		MACH_TMQ_CAPD		TMQ_CAPD		1935
+omap3_wl		MACH_OMAP3_WL		OMAP3_WL		1936
+chumby			MACH_CHUMBY		CHUMBY			1937
+atsarm9			MACH_ATSARM9		ATSARM9			1938
+davinci_dm365_evm	MACH_DAVINCI_DM365_EVM	DAVINCI_DM365_EVM	1939
+bahamas			MACH_BAHAMAS		BAHAMAS			1940
+das			MACH_DAS		DAS			1941
+minidas			MACH_MINIDAS		MINIDAS			1942
+vk1000			MACH_VK1000		VK1000			1943
+centro			MACH_CENTRO		CENTRO			1944
+ctera_2bay		MACH_CTERA_2BAY		CTERA_2BAY		1945
+edgeconnect		MACH_EDGECONNECT	EDGECONNECT		1946
+nd27000			MACH_ND27000		ND27000			1947
+cobra			MACH_GEMALTO_COBRA	GEMALTO_COBRA		1948
+ingelabs_comet		MACH_INGELABS_COMET	INGELABS_COMET		1949
+pollux_wiz		MACH_POLLUX_WIZ		POLLUX_WIZ		1950
+blackstone		MACH_BLACKSTONE		BLACKSTONE		1951
+topaz			MACH_TOPAZ		TOPAZ			1952
+aixle			MACH_AIXLE		AIXLE			1953
+mw998			MACH_MW998		MW998			1954
+nokia_rx51		MACH_NOKIA_RX51		NOKIA_RX51		1955
+vsc5605ev		MACH_VSC5605EV		VSC5605EV		1956
+nt98700dk		MACH_NT98700DK		NT98700DK		1957
+icontact		MACH_ICONTACT		ICONTACT		1958
+swarco_frcpu		MACH_SWARCO_FRCPU	SWARCO_FRCPU		1959
+swarco_scpu		MACH_SWARCO_SCPU	SWARCO_SCPU		1960
+bbox_p16		MACH_BBOX_P16		BBOX_P16		1961
+bstd			MACH_BSTD		BSTD			1962
+sbc2440ii		MACH_SBC2440II		SBC2440II		1963
+pcm034			MACH_PCM034		PCM034			1964
+neso			MACH_NESO		NESO			1965
+wlnx_9g20		MACH_WLNX_9G20		WLNX_9G20		1966
+omap_zoom2		MACH_OMAP_ZOOM2		OMAP_ZOOM2		1967
+totemnova		MACH_TOTEMNOVA		TOTEMNOVA		1968
+c5000			MACH_C5000		C5000			1969
+unipo_at91sam9263	MACH_UNIPO_AT91SAM9263	UNIPO_AT91SAM9263	1970
+ethernut5		MACH_ETHERNUT5		ETHERNUT5		1971
+arm11			MACH_ARM11		ARM11			1972
+cpuat9260		MACH_CPUAT9260		CPUAT9260		1973
+cpupxa255		MACH_CPUPXA255		CPUPXA255		1974
+cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
+cheflux			MACH_CHEFLUX		CHEFLUX			1976
+eb_cpux9k2		MACH_EB_CPUX9K2		EB_CPUX9K2		1977
+opcotec			MACH_OPCOTEC		OPCOTEC			1978
+yt			MACH_YT			YT			1979
+motoq			MACH_MOTOQ		MOTOQ			1980
+bsb1			MACH_BSB1		BSB1			1981
+acs5k			MACH_ACS5K		ACS5K			1982
+milan			MACH_MILAN		MILAN			1983
+quartzv2		MACH_QUARTZV2		QUARTZV2		1984
+rsvp			MACH_RSVP		RSVP			1985
+rmp200			MACH_RMP200		RMP200			1986
+snapper_9260		MACH_SNAPPER_9260	SNAPPER_9260		1987
+dsm320			MACH_DSM320		DSM320			1988
+adsgcm			MACH_ADSGCM		ADSGCM			1989
+ase2_400		MACH_ASE2_400		ASE2_400		1990
+pizza			MACH_PIZZA		PIZZA			1991
+spot_ngpl		MACH_SPOT_NGPL		SPOT_NGPL		1992
+armata			MACH_ARMATA		ARMATA			1993
+exeda			MACH_EXEDA		EXEDA			1994
+mx31sf005		MACH_MX31SF005		MX31SF005		1995
+f5d8231_4_v2		MACH_F5D8231_4_V2	F5D8231_4_V2		1996
+q2440			MACH_Q2440		Q2440			1997
+qq2440			MACH_QQ2440		QQ2440			1998
+mini2440		MACH_MINI2440		MINI2440		1999
+colibri300		MACH_COLIBRI300		COLIBRI300		2000
+jades			MACH_JADES		JADES			2001
+spark			MACH_SPARK		SPARK			2002
+benzina			MACH_BENZINA		BENZINA			2003
+blaze			MACH_BLAZE		BLAZE			2004
+linkstation_ls_hgl	MACH_LINKSTATION_LS_HGL	LINKSTATION_LS_HGL	2005
+htcvenus		MACH_HTCVENUS		HTCVENUS		2006
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index c85860bad585..8de86e4feada 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -377,6 +377,6 @@ struct op {
 	u32 flags;
 };
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) || defined(CONFIG_PM)
 extern void vfp_save_state(void *location, u32 fpexc);
 #endif
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index a62dcf7098ba..c92a08bd6a86 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -101,9 +101,12 @@ ENTRY(vfp_support_entry)
 	VFPFSTMIA r4, r5		@ save the working registers
 	VFPFMRX	r5, FPSCR		@ current status
 	tst	r1, #FPEXC_EX		@ is there additional state to save?
-	VFPFMRX	r6, FPINST, NE		@ FPINST (only if FPEXC.EX is set)
-	tstne	r1, #FPEXC_FP2V		@ is there an FPINST2 to read?
-	VFPFMRX	r8, FPINST2, NE		@ FPINST2 if needed (and present)
+	beq	1f
+	VFPFMRX	r6, FPINST		@ FPINST (only if FPEXC.EX is set)
+	tst	r1, #FPEXC_FP2V		@ is there an FPINST2 to read?
+	beq	1f
+	VFPFMRX	r8, FPINST2		@ FPINST2 if needed (and present)
+1:
 	stmia	r4, {r1, r5, r6, r8}	@ save FPEXC, FPSCR, FPINST, FPINST2
 					@ and point r4 at the word at the
 					@ start of the register dump
@@ -117,9 +120,12 @@ no_old_VFP_process:
 					@ FPEXC is in a safe state
 	ldmia	r10, {r1, r5, r6, r8}	@ load FPEXC, FPSCR, FPINST, FPINST2
 	tst	r1, #FPEXC_EX		@ is there additional state to restore?
-	VFPFMXR	FPINST, r6, NE		@ restore FPINST (only if FPEXC.EX is set)
-	tstne	r1, #FPEXC_FP2V		@ is there an FPINST2 to write?
-	VFPFMXR	FPINST2, r8, NE		@ FPINST2 if needed (and present)
+	beq	1f
+	VFPFMXR	FPINST, r6		@ restore FPINST (only if FPEXC.EX is set)
+	tst	r1, #FPEXC_FP2V		@ is there an FPINST2 to write?
+	beq	1f
+	VFPFMXR	FPINST2, r8		@ FPINST2 if needed (and present)
+1:
 	VFPFMXR	FPSCR, r5		@ restore status
 
 check_for_exception:
@@ -166,7 +172,7 @@ process_exception:
 					@ retry the faulted instruction
 ENDPROC(vfp_support_entry)
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) || defined(CONFIG_PM)
 ENTRY(vfp_save_state)
 	@ Save the current VFP state
 	@ r0 - save location
@@ -175,9 +181,12 @@ ENTRY(vfp_save_state)
 	VFPFSTMIA r0, r2		@ save the working registers
 	VFPFMRX	r2, FPSCR		@ current status
 	tst	r1, #FPEXC_EX		@ is there additional state to save?
-	VFPFMRX	r3, FPINST, NE		@ FPINST (only if FPEXC.EX is set)
-	tstne	r1, #FPEXC_FP2V		@ is there an FPINST2 to read?
-	VFPFMRX	r12, FPINST2, NE	@ FPINST2 if needed (and present)
+	beq	1f
+	VFPFMRX	r3, FPINST		@ FPINST (only if FPEXC.EX is set)
+	tst	r1, #FPEXC_FP2V		@ is there an FPINST2 to read?
+	beq	1f
+	VFPFMRX	r12, FPINST2		@ FPINST2 if needed (and present)
+1:
 	stmia	r0, {r1, r2, r3, r12}	@ save FPEXC, FPSCR, FPINST, FPINST2
 	mov	pc, lr
 ENDPROC(vfp_save_state)
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index c0d2c9bb952b..9f476a1be2ca 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -322,6 +322,61 @@ static void vfp_enable(void *unused)
 	set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
 }
 
+#ifdef CONFIG_PM
+#include <linux/sysdev.h>
+
+static int vfp_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct thread_info *ti = current_thread_info();
+	u32 fpexc = fmrx(FPEXC);
+
+	/* if vfp is on, then save state for resumption */
+	if (fpexc & FPEXC_EN) {
+		printk(KERN_DEBUG "%s: saving vfp state\n", __func__);
+		vfp_save_state(&ti->vfpstate, fpexc);
+
+		/* disable, just in case */
+		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
+	}
+
+	/* clear any information we had about last context state */
+	memset(last_VFP_context, 0, sizeof(last_VFP_context));
+
+	return 0;
+}
+
+static int vfp_pm_resume(struct sys_device *dev)
+{
+	/* ensure we have access to the vfp */
+	vfp_enable(NULL);
+
+	/* and disable it to ensure the next usage restores the state */
+	fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
+
+	return 0;
+}
+
+static struct sysdev_class vfp_pm_sysclass = {
+	.name		= "vfp",
+	.suspend	= vfp_pm_suspend,
+	.resume		= vfp_pm_resume,
+};
+
+static struct sys_device vfp_pm_sysdev = {
+	.cls	= &vfp_pm_sysclass,
+};
+
+static void vfp_pm_init(void)
+{
+	sysdev_class_register(&vfp_pm_sysclass);
+	sysdev_register(&vfp_pm_sysdev);
+}
+
+
+#else
+static inline void vfp_pm_init(void) { }
+#endif /* CONFIG_PM */
+
 #include <linux/smp.h>
 
 /*
@@ -365,12 +420,22 @@ static int __init vfp_init(void)
 		vfp_vector = vfp_support_entry;
 
 		thread_register_notifier(&vfp_notifier_block);
+		vfp_pm_init();
 
 		/*
 		 * We detected VFP, and the support code is
 		 * in place; report VFP support to userspace.
 		 */
 		elf_hwcap |= HWCAP_VFP;
+#ifdef CONFIG_NEON
+		/*
+		 * Check for the presence of the Advanced SIMD
+		 * load/store instructions, integer and single
+		 * precision floating point operations.
+		 */
+		if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
+			elf_hwcap |= HWCAP_NEON;
+#endif
 	}
 	return 0;
 }
diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c
index 49b2cf2c38f3..baadc97f8627 100644
--- a/arch/frv/kernel/sys_frv.c
+++ b/arch/frv/kernel/sys_frv.c
@@ -35,22 +35,21 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	int error = -EBADF;
 	struct file * file = NULL;
 
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
 	/* As with sparc32, make sure the shift for mmap2 is constant
 	   (12), no matter what PAGE_SIZE we have.... */
 
 	/* But unlike sparc32, don't just silently break if we're
 	   trying to map something we can't */
-	if (pgoff & ((1<<(PAGE_SHIFT-12))-1))
+	if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
 		return -EINVAL;
+	pgoff >>= PAGE_SHIFT - 12;
 
-	pgoff >>= (PAGE_SHIFT - 12);
+	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+	if (!(flags & MAP_ANONYMOUS)) {
+		file = fget(fd);
+		if (!file)
+			goto out;
+	}
 
 	down_write(&current->mm->mmap_sem);
 	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index e05f9e1d3faa..27eb67604c53 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Mon Aug  4 15:38:01 2008
+# Linux kernel version: 2.6.28-rc7
+# Mon Dec  8 08:12:07 2008
 #
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -26,6 +26,7 @@ CONFIG_LOG_BUF_SHIFT=20
 CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 # CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
 # CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
 # CONFIG_GROUP_SCHED is not set
@@ -46,7 +47,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -63,7 +63,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -72,15 +74,11 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -113,6 +111,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -125,8 +124,6 @@ CONFIG_MMU=y
 CONFIG_SWIOTLB=y
 CONFIG_IOMMU_HELPER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -139,13 +136,16 @@ CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_IA64_UNCACHED_ALLOCATOR=y
 CONFIG_AUDIT_ARCH=y
+# CONFIG_PARAVIRT_GUEST is not set
 CONFIG_IA64_GENERIC=y
 # CONFIG_IA64_DIG is not set
+# CONFIG_IA64_DIG_VTD is not set
 # CONFIG_IA64_HP_ZX1 is not set
 # CONFIG_IA64_HP_ZX1_SWIOTLB is not set
 # CONFIG_IA64_SGI_SN2 is not set
 # CONFIG_IA64_SGI_UV is not set
 # CONFIG_IA64_HP_SIM is not set
+# CONFIG_IA64_XEN_GUEST is not set
 # CONFIG_ITANIUM is not set
 CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_4KB is not set
@@ -182,16 +182,17 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_NR_QUICK=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_MMU_NOTIFIER=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
@@ -231,12 +232,12 @@ CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
 CONFIG_DMIID=y
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 
-# CONFIG_DMAR is not set
-
 #
-# Power management and ACPI
+# Power management and ACPI options
 #
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
@@ -248,7 +249,6 @@ CONFIG_ACPI_PROC_EVENT=y
 CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_DOCK=y
-# CONFIG_ACPI_BAY is not set
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
@@ -256,9 +256,7 @@ CONFIG_ACPI_NUMA=y
 # CONFIG_ACPI_CUSTOM_DSDT is not set
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
 # CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
 
@@ -275,7 +273,7 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
+CONFIG_PCI_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 CONFIG_HOTPLUG_PCI=m
@@ -286,6 +284,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 # CONFIG_HOTPLUG_PCI_SGI is not set
 # CONFIG_PCCARD is not set
+CONFIG_DMAR=y
 CONFIG_NET=y
 
 #
@@ -333,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -353,11 +353,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -385,7 +384,7 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
+# CONFIG_PNP_DEBUG_MESSAGES is not set
 
 #
 # Protocols
@@ -419,10 +418,9 @@ CONFIG_SGI_XP=m
 # CONFIG_HP_ILO is not set
 CONFIG_SGI_GRU=m
 # CONFIG_SGI_GRU_DEBUG is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
@@ -430,12 +428,12 @@ CONFIG_BLK_DEV_IDE=y
 CONFIG_IDE_TIMINGS=y
 CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
 CONFIG_BLK_DEV_IDESCSI=m
 # CONFIG_BLK_DEV_IDEACPI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
@@ -705,6 +703,9 @@ CONFIG_TULIP=m
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -725,11 +726,11 @@ CONFIG_E100=m
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 CONFIG_IGB=y
@@ -747,18 +748,22 @@ CONFIG_TIGON3=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_TR is not set
 
@@ -826,9 +831,11 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -942,15 +949,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=m
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -959,6 +967,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -1009,6 +1019,7 @@ CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1113,8 +1124,7 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
 
 #
@@ -1122,6 +1132,34 @@ CONFIG_USB_HID=m
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1138,6 +1176,9 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1155,6 +1196,12 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
 
 #
 # USB Device Class drivers
@@ -1162,13 +1209,14 @@ CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1191,7 +1239,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1204,7 +1251,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1222,7 +1269,9 @@ CONFIG_USB_MON=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1246,6 +1295,15 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
+
+#
+# HP Simulator drivers
+#
+# CONFIG_HP_SIMETH is not set
+# CONFIG_HP_SIMSERIAL is not set
+# CONFIG_HP_SIMSCSI is not set
 CONFIG_MSPEC=m
 
 #
@@ -1260,7 +1318,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
@@ -1271,6 +1329,7 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -1282,8 +1341,8 @@ CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
 
 #
@@ -1314,6 +1373,7 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_VMCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1356,6 +1416,7 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_SUNRPC_XPRT_RDMA=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1433,38 +1494,6 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-CONFIG_HAVE_KVM=y
-CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-
-#
-# HP Simulator drivers
-#
-# CONFIG_HP_SIMETH is not set
-# CONFIG_HP_SIMSERIAL is not set
-# CONFIG_HP_SIMSCSI is not set
 
 #
 # Kernel hacking
@@ -1503,8 +1532,19 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
@@ -1519,14 +1559,19 @@ CONFIG_SYSVIPC_COMPAT=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_RNG=m
 CONFIG_CRYPTO_MANAGER=m
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1599,5 +1644,36 @@ CONFIG_CRYPTO_DES=m
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_HAVE_KVM=y
+CONFIG_VIRTUALIZATION=y
+# CONFIG_KVM is not set
+# CONFIG_VIRTIO_PCI is not set
+# CONFIG_VIRTIO_BALLOON is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_PER_CPU=y
diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig
index f92306bbedb8..8d513a8c5266 100644
--- a/arch/ia64/hp/sim/Kconfig
+++ b/arch/ia64/hp/sim/Kconfig
@@ -4,6 +4,7 @@ menu "HP Simulator drivers"
 
 config HP_SIMETH
 	bool "Simulated Ethernet "
+	depends on NET
 
 config HP_SIMSERIAL
 	bool "Simulated serial driver support"
diff --git a/arch/ia64/include/asm/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h
index 0b597424fcfc..33c8e55f5775 100644
--- a/arch/ia64/include/asm/paravirt_privop.h
+++ b/arch/ia64/include/asm/paravirt_privop.h
@@ -83,7 +83,6 @@ extern unsigned long ia64_native_getreg_func(int regnum);
 #define paravirt_getreg(reg)					\
 	({							\
 		unsigned long res;				\
-		BUILD_BUG_ON(!__builtin_constant_p(reg));	\
 		if ((reg) == _IA64_REG_IP)			\
 			res = ia64_native_getreg(_IA64_REG_IP); \
 		else						\
diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h
index 6417c1ecb44e..14055c636adf 100644
--- a/arch/ia64/include/asm/ptrace.h
+++ b/arch/ia64/include/asm/ptrace.h
@@ -325,8 +325,6 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
   #define arch_has_block_step()   (1)
   extern void user_enable_block_step(struct task_struct *);
 
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
 #endif /* !__KERNEL__ */
 
 /* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 26228e2d01ae..c75b914f2d6b 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -53,10 +53,12 @@ int __ref arch_register_cpu(int num)
 }
 EXPORT_SYMBOL(arch_register_cpu);
 
-void arch_unregister_cpu(int num)
+void __ref arch_unregister_cpu(int num)
 {
 	unregister_cpu(&sysfs_cpus[num].cpu);
+#ifdef CONFIG_ACPI
 	unmap_cpu_from_node(num, cpu_to_node(num));
+#endif
 }
 EXPORT_SYMBOL(arch_unregister_cpu);
 #else
diff --git a/arch/ia64/kvm/Makefile b/arch/ia64/kvm/Makefile
index 3ab4d6d50704..92cef66ca268 100644
--- a/arch/ia64/kvm/Makefile
+++ b/arch/ia64/kvm/Makefile
@@ -58,7 +58,7 @@ endif
 kvm-objs := $(common-objs) kvm-ia64.o kvm_fw.o
 obj-$(CONFIG_KVM) += kvm.o
 
-EXTRA_CFLAGS_vcpu.o += -mfixed-range=f2-f5,f12-f127
+CFLAGS_vcpu.o += -mfixed-range=f2-f5,f12-f127
 kvm-intel-objs = vmm.o vmm_ivt.o trampoline.o vcpu.o optvfault.o mmio.o \
 	vtlb.o process.o
 #Add link memcpy and memset to avoid possible structure assignment error
diff --git a/arch/ia64/kvm/optvfault.S b/arch/ia64/kvm/optvfault.S
index 634abad979b5..32254ce9a1bd 100644
--- a/arch/ia64/kvm/optvfault.S
+++ b/arch/ia64/kvm/optvfault.S
@@ -107,10 +107,10 @@ END(kvm_vps_resume_normal)
 GLOBAL_ENTRY(kvm_vps_resume_handler)
 	movl r30 = PAL_VPS_RESUME_HANDLER
 	;;
-	ld8 r27=[r25]
+	ld8 r26=[r25]
 	shr r17=r17,IA64_ISR_IR_BIT
 	;;
-	dep r27=r17,r27,63,1   // bit 63 of r27 indicate whether enable CFLE
+	dep r26=r17,r26,63,1   // bit 63 of r26 indicate whether enable CFLE
 	mov pr=r23,-2
 	br.sptk.many kvm_vps_entry
 END(kvm_vps_resume_handler)
@@ -894,12 +894,15 @@ ENTRY(kvm_resume_to_guest)
 	;;
 	ld8 r19=[r19]
 	mov b0=r29
-	cmp.ne p6,p7 = r0,r0
+	mov r27=cr.isr
 	;;
-	tbit.z p6,p7 = r19,IA64_PSR_IC_BIT		// p1=vpsr.ic
+	tbit.z p6,p7 = r19,IA64_PSR_IC_BIT		// p7=vpsr.ic
+	shr r27=r27,IA64_ISR_IR_BIT
 	;;
 	(p6) ld8 r26=[r25]
 	(p7) mov b0=r28
+	;;
+	(p6) dep r26=r27,r26,63,1
 	mov pr=r31,-2
 	br.sptk.many b0             // call pal service
 	;;
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index c3aa851d1ca6..4e1801bad83a 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -292,7 +292,7 @@ EXPORT_SYMBOL(sn_io_slot_fixup);
  * sn_pci_controller_fixup() - This routine sets up a bus's resources
  *			       consistent with the Linux PCI abstraction layer.
  */
-static void
+static void __init
 sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 {
 	s64 status = 0;
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 96c31b4180c3..0c66dbdd1d72 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -5,7 +5,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2000-2007 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2000-2008 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 #include <linux/irq.h>
@@ -375,6 +375,7 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info)
 	int cpu = nasid_slice_to_cpuid(nasid, slice);
 #ifdef CONFIG_SMP
 	int cpuphys;
+	irq_desc_t *desc;
 #endif
 
 	pci_dev_get(pci_dev);
@@ -391,6 +392,12 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info)
 #ifdef CONFIG_SMP
 	cpuphys = cpu_physical_id(cpu);
 	set_irq_affinity_info(sn_irq_info->irq_irq, cpuphys, 0);
+	desc = irq_to_desc(sn_irq_info->irq_irq);
+	/*
+	 * Affinity was set by the PROM, prevent it from
+	 * being reset by the request_irq() path.
+	 */
+	desc->status |= IRQ_AFFINITY_SET;
 #endif
 }
 
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index bb1d24929640..02c5b8a9fb60 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -200,7 +200,7 @@ static int __cpuinitdata shub_1_1_found;
  * Set flag for enabling shub specific wars
  */
 
-static inline int __init is_shub_1_1(int nasid)
+static inline int __cpuinit is_shub_1_1(int nasid)
 {
 	unsigned long id;
 	int rev;
@@ -212,7 +212,7 @@ static inline int __init is_shub_1_1(int nasid)
 	return rev <= 2;
 }
 
-static void __init sn_check_for_wars(void)
+static void __cpuinit sn_check_for_wars(void)
 {
 	int cnode;
 
@@ -512,7 +512,6 @@ static void __init sn_init_pdas(char **cmdline_p)
 	for_each_online_node(cnode) {
 		nodepdaindr[cnode] =
 		    alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t));
-		memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
 		memset(nodepdaindr[cnode]->phys_cpuid, -1,
 		    sizeof(nodepdaindr[cnode]->phys_cpuid));
 		spin_lock_init(&nodepdaindr[cnode]->ptc_lock);
@@ -521,11 +520,9 @@ static void __init sn_init_pdas(char **cmdline_p)
 	/*
 	 * Allocate & initialize nodepda for TIOs.  For now, put them on node 0.
 	 */
-	for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) {
+	for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++)
 		nodepdaindr[cnode] =
 		    alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
-		memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
-	}
 
 	/*
 	 * Now copy the array of nodepda pointers to each nodepda.
diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S
index 40180778a5c7..90916067b9c1 100644
--- a/arch/m32r/kernel/head.S
+++ b/arch/m32r/kernel/head.S
@@ -23,7 +23,7 @@ __INITDATA
 /*
  * References to members of the boot_cpu_data structure.
  */
-	.text
+.section .text.head, "ax"
 	.global	start_kernel
 	.global __bss_start
 	.global _end
@@ -133,7 +133,6 @@ loop1:
 /*
  * AP startup routine
  */
-	.text
 	.global	eit_vector
 ENTRY(startup_AP)
 ;; setup EVB
@@ -230,6 +229,7 @@ ENTRY(startup_AP)
 	nop
 #endif  /* CONFIG_SMP */
 
+	.text
 ENTRY(stack_start)
 	.long	init_thread_union+8192
 	.long	__KERNEL_DS
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index 15a6f36c06db..9db05df20c0e 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -27,6 +27,7 @@ SECTIONS
   _text = .;			/* Text and read-only data */
   .boot : { *(.boot) } = 0
   .text : {
+	*(.text.head)
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 8bd61a640fc9..23597beb66c1 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:00 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec  2 20:27:42 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_NO_IOPORT=y
 # CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform dependent setup
 #
-# CONFIG_SUN3 is not set
 CONFIG_AMIGA=y
 # CONFIG_ATARI is not set
 # CONFIG_MAC is not set
@@ -148,19 +138,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # General setup
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_ZORRO=y
@@ -212,7 +204,6 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -262,13 +253,14 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
@@ -282,19 +274,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -302,20 +297,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -323,8 +318,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -337,9 +332,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -351,16 +346,16 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -387,6 +382,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -410,19 +406,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -470,21 +455,20 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
-CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
@@ -609,8 +593,12 @@ CONFIG_APNE=m
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
 # CONFIG_NET_POCKET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -763,11 +751,11 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -777,6 +765,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -802,6 +791,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -829,6 +819,8 @@ CONFIG_FB_FM2=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -852,12 +844,19 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_DMASOUND_PAULA=m
 CONFIG_DMASOUND=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -867,6 +866,8 @@ CONFIG_HIDRAW=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -883,8 +884,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+CONFIG_JBD2=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -895,6 +897,7 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -906,6 +909,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -944,6 +948,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -986,6 +991,7 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1059,7 +1065,13 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1067,6 +1079,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
@@ -1077,10 +1090,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
@@ -1154,14 +1169,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index c41b854c0284..935108d115a0 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:01 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec  2 20:27:43 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_NO_IOPORT=y
 # CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform dependent setup
 #
-# CONFIG_SUN3 is not set
 # CONFIG_AMIGA is not set
 # CONFIG_ATARI is not set
 # CONFIG_MAC is not set
@@ -148,19 +138,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # General setup
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_HEARTBEAT=y
@@ -210,7 +202,6 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -260,13 +251,14 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
@@ -280,19 +272,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -300,20 +295,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -321,8 +316,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -335,9 +330,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -349,16 +344,16 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -385,6 +380,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -408,19 +404,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -458,6 +443,7 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -540,6 +526,9 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -609,6 +598,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
@@ -663,11 +653,11 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -677,6 +667,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -702,6 +693,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 # CONFIG_FB_CFB_COPYAREA is not set
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -724,6 +716,8 @@ CONFIG_FB_APOLLO=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -750,6 +744,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -758,6 +758,8 @@ CONFIG_HIDRAW=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -773,8 +775,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+CONFIG_JBD2=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -785,6 +788,7 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -796,6 +800,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -834,6 +839,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -877,6 +883,7 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -949,7 +956,13 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -957,6 +970,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
@@ -967,10 +981,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
@@ -1044,14 +1060,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 654c5acb9e86..a594a1d47b62 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:02 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec  2 20:27:44 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_NO_IOPORT=y
 # CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform dependent setup
 #
-# CONFIG_SUN3 is not set
 # CONFIG_AMIGA is not set
 CONFIG_ATARI=y
 # CONFIG_MAC is not set
@@ -148,19 +138,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # General setup
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_STRAM_PROC=y
@@ -208,7 +200,6 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -258,13 +249,14 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
@@ -278,19 +270,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -298,20 +293,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -319,8 +314,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -333,9 +328,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -347,16 +342,16 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -383,6 +378,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -406,19 +402,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -462,21 +447,20 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
-CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
@@ -565,12 +549,15 @@ CONFIG_EQUALIZER=m
 CONFIG_VETH=m
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
 CONFIG_ATARILANCE=m
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NET_POCKET is not set
 # CONFIG_NETDEV_1000 is not set
@@ -644,6 +631,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 CONFIG_MOUSE_ATARI=m
@@ -706,11 +694,11 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -720,6 +708,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -745,6 +734,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -768,6 +758,8 @@ CONFIG_FB_ATARI=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_ATY is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -790,12 +782,19 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -805,6 +804,8 @@ CONFIG_HIDRAW=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -821,10 +822,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4DEV_FS=y
-# CONFIG_EXT4DEV_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-CONFIG_JBD2=y
+CONFIG_JBD2=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -835,6 +835,7 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -846,6 +847,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -884,6 +886,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -925,6 +928,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -998,7 +1002,13 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1006,6 +1016,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
@@ -1016,10 +1027,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
@@ -1093,14 +1106,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index 2e44af0fe54a..d3d9814a91de 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:03 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec  2 20:27:45 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_NO_IOPORT=y
 # CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform dependent setup
 #
-# CONFIG_SUN3 is not set
 # CONFIG_AMIGA is not set
 # CONFIG_ATARI is not set
 # CONFIG_MAC is not set
@@ -151,19 +141,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # General setup
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
@@ -212,7 +204,6 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -262,13 +253,14 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
@@ -282,19 +274,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -302,20 +297,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -323,8 +318,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -337,9 +332,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -351,16 +346,16 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -387,6 +382,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -410,19 +406,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -460,6 +445,7 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -545,6 +531,9 @@ CONFIG_BVME6000_NET=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -614,6 +603,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
@@ -668,11 +658,11 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -682,6 +672,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -721,6 +712,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -729,6 +726,8 @@ CONFIG_HIDRAW=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -744,8 +743,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+CONFIG_JBD2=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -756,6 +756,7 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -767,6 +768,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -805,6 +807,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -848,6 +851,7 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -921,7 +925,13 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -929,6 +939,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
@@ -939,10 +950,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
@@ -1016,14 +1029,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=m
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 3570fc89b089..5556ef088d04 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:04 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec  2 20:27:46 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_NO_IOPORT=y
 # CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform dependent setup
 #
-# CONFIG_SUN3 is not set
 # CONFIG_AMIGA is not set
 # CONFIG_ATARI is not set
 # CONFIG_MAC is not set
@@ -149,19 +139,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # General setup
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_HEARTBEAT=y
@@ -211,7 +203,6 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -261,13 +252,14 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
@@ -281,19 +273,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -301,20 +296,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -322,8 +317,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -336,9 +331,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -350,16 +345,16 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -386,6 +381,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -409,19 +405,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -459,6 +444,7 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -542,6 +528,9 @@ CONFIG_HPLANCE=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -613,6 +602,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
@@ -673,11 +663,11 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -687,6 +677,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -712,6 +703,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -734,6 +726,8 @@ CONFIG_FB_HP300=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -760,6 +754,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -768,6 +768,8 @@ CONFIG_HIDRAW=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -781,8 +783,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+CONFIG_JBD2=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -793,6 +796,7 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -804,6 +808,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -842,6 +847,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -885,6 +891,7 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -957,7 +964,13 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -965,6 +978,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
@@ -975,10 +989,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
@@ -1052,14 +1068,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index db6e8822594a..c6de25724a25 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:06 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec  2 20:27:47 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_NO_IOPORT=y
 # CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform dependent setup
 #
-# CONFIG_SUN3 is not set
 # CONFIG_AMIGA is not set
 # CONFIG_ATARI is not set
 CONFIG_MAC=y
@@ -150,19 +140,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # General setup
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 # CONFIG_HEARTBEAT is not set
@@ -209,7 +201,6 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -259,13 +250,14 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
@@ -279,19 +271,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -299,20 +294,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -320,8 +315,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -334,9 +329,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -348,16 +343,16 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -384,6 +379,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -410,19 +406,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -460,21 +445,20 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
-CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
@@ -581,6 +565,9 @@ CONFIG_MACMACE=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -650,6 +637,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
@@ -706,11 +694,11 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -720,6 +708,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -745,6 +734,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -768,6 +758,8 @@ CONFIG_FB_MAC=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -796,6 +788,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -804,6 +802,8 @@ CONFIG_HIDRAW=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -820,8 +820,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+CONFIG_JBD2=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -832,6 +833,7 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -843,6 +845,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -881,6 +884,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -923,6 +927,7 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -996,7 +1001,13 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1004,6 +1015,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
@@ -1014,10 +1026,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
@@ -1091,14 +1105,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 1a806102b999..70693588031e 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:07 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec  2 20:27:48 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_NO_IOPORT=y
 # CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform dependent setup
 #
-# CONFIG_SUN3 is not set
 CONFIG_AMIGA=y
 CONFIG_ATARI=y
 CONFIG_MAC=y
@@ -154,19 +144,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # General setup
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_ZORRO=y
@@ -222,7 +214,6 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -272,13 +263,14 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
@@ -292,19 +284,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -312,20 +307,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -333,8 +328,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -347,9 +342,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -361,16 +356,16 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -397,6 +392,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -424,19 +420,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -486,21 +471,20 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
-CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
@@ -629,7 +613,7 @@ CONFIG_VETH=m
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
 CONFIG_ARIADNE=m
 CONFIG_A2065=m
 CONFIG_HYDRA=m
@@ -657,8 +641,12 @@ CONFIG_NE2000=m
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
 # CONFIG_NET_POCKET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -735,6 +723,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_INPORT is not set
@@ -832,11 +821,11 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -846,6 +835,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -871,6 +861,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -905,6 +896,8 @@ CONFIG_FB_HP300=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_ATY is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -930,6 +923,7 @@ CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND_PAULA=m
 CONFIG_DMASOUND_Q40=m
@@ -938,6 +932,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -947,6 +947,8 @@ CONFIG_HIDRAW=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -973,10 +975,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4DEV_FS=y
-# CONFIG_EXT4DEV_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-CONFIG_JBD2=y
+CONFIG_JBD2=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -987,6 +988,7 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -998,6 +1000,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1036,6 +1039,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1079,6 +1083,7 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1156,7 +1161,13 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1164,6 +1175,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
@@ -1174,10 +1186,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
@@ -1251,14 +1265,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index cacb5aef6a37..52d42715bd0b 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:08 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec  2 20:27:50 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_NO_IOPORT=y
 # CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform dependent setup
 #
-# CONFIG_SUN3 is not set
 # CONFIG_AMIGA is not set
 # CONFIG_ATARI is not set
 # CONFIG_MAC is not set
@@ -151,19 +141,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # General setup
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
@@ -212,7 +204,6 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -262,13 +253,14 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
@@ -282,19 +274,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -302,20 +297,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -323,8 +318,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -337,9 +332,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -351,16 +346,16 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -387,6 +382,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -410,19 +406,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -460,6 +445,7 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -544,6 +530,9 @@ CONFIG_MVME147_NET=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -613,6 +602,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
@@ -667,11 +657,11 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -681,6 +671,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -720,6 +711,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -728,6 +725,8 @@ CONFIG_HIDRAW=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -743,8 +742,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+CONFIG_JBD2=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -755,6 +755,7 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -766,6 +767,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -804,6 +806,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -847,6 +850,7 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -920,7 +924,13 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -928,6 +938,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
@@ -938,10 +949,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
@@ -1015,14 +1028,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index a183e25e348d..3403ed2eda79 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:09 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec  2 20:27:51 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_NO_IOPORT=y
 # CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform dependent setup
 #
-# CONFIG_SUN3 is not set
 # CONFIG_AMIGA is not set
 # CONFIG_ATARI is not set
 # CONFIG_MAC is not set
@@ -151,19 +141,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # General setup
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
@@ -212,7 +204,6 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -262,13 +253,14 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
@@ -282,19 +274,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -302,20 +297,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -323,8 +318,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -337,9 +332,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -351,16 +346,16 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -387,6 +382,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -410,19 +406,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -460,6 +445,7 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -545,6 +531,9 @@ CONFIG_MVME16x_NET=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -614,6 +603,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
@@ -668,11 +658,11 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -682,6 +672,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -721,6 +712,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -729,6 +726,8 @@ CONFIG_HIDRAW=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -745,8 +744,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+CONFIG_JBD2=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -757,6 +757,7 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -768,6 +769,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -806,6 +808,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -849,6 +852,7 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -922,7 +926,13 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -930,6 +940,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
@@ -940,10 +951,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
@@ -1017,14 +1030,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 72eaff0776b8..3459c594194b 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:10 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec  2 20:27:52 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_NO_IOPORT=y
 # CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform dependent setup
 #
-# CONFIG_SUN3 is not set
 # CONFIG_AMIGA is not set
 # CONFIG_ATARI is not set
 # CONFIG_MAC is not set
@@ -148,19 +138,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # General setup
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_HEARTBEAT=y
@@ -209,7 +201,6 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -259,13 +250,14 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
@@ -279,19 +271,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -299,20 +294,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -320,8 +315,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -334,9 +329,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -348,16 +343,16 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -384,6 +379,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -407,19 +403,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -458,21 +443,20 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
-CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
@@ -585,8 +569,12 @@ CONFIG_NE2000=m
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -656,6 +644,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_INPORT is not set
@@ -717,11 +706,11 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -731,6 +720,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -756,6 +746,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -778,6 +769,8 @@ CONFIG_FB_Q40=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -800,12 +793,19 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_DMASOUND_Q40=m
 CONFIG_DMASOUND=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -814,6 +814,8 @@ CONFIG_HIDRAW=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -827,8 +829,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+CONFIG_JBD2=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -839,6 +842,7 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -850,6 +854,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -888,6 +893,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -930,6 +936,7 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1002,7 +1009,13 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1010,6 +1023,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
@@ -1020,10 +1034,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
@@ -1097,14 +1113,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index cb62b96d766e..f404917429fa 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:11 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec  2 20:27:53 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_NO_IOPORT=y
 CONFIG_NO_DMA=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,10 +105,19 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform dependent setup
 #
+# CONFIG_AMIGA is not set
+# CONFIG_ATARI is not set
+# CONFIG_MAC is not set
+# CONFIG_APOLLO is not set
+# CONFIG_VME is not set
+# CONFIG_HP300 is not set
+# CONFIG_SUN3X is not set
+# CONFIG_Q40 is not set
 CONFIG_SUN3=y
 
 #
@@ -137,19 +136,21 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # General setup
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
@@ -198,7 +199,6 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -248,13 +248,14 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
@@ -268,19 +269,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -288,20 +292,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -309,8 +313,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -323,9 +327,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -337,16 +341,16 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -373,6 +377,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -396,19 +401,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -446,6 +440,7 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -531,6 +526,9 @@ CONFIG_SUN3_82586=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -599,6 +597,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
@@ -655,16 +654,13 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_WATCHDOG is not set
 
 #
-# Sonics Silicon Backplane
-#
-
-#
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -690,6 +686,7 @@ CONFIG_GEN_RTC_X=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
@@ -711,6 +708,8 @@ CONFIG_FB=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -737,6 +736,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -744,6 +749,8 @@ CONFIG_HIDRAW=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -757,8 +764,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+CONFIG_JBD2=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -769,6 +777,7 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -780,6 +789,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -818,6 +828,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -861,6 +872,7 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -934,7 +946,13 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -942,6 +960,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
@@ -952,10 +971,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
@@ -1029,14 +1050,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 04b4363a7050..4d8a1e84e39f 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:12 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec  2 20:27:54 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -14,7 +14,6 @@ CONFIG_TIME_LOW_RES=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_NO_IOPORT=y
 # CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -67,22 +66,13 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -115,11 +105,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform dependent setup
 #
-# CONFIG_SUN3 is not set
 # CONFIG_AMIGA is not set
 # CONFIG_ATARI is not set
 # CONFIG_MAC is not set
@@ -148,19 +138,21 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # General setup
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
@@ -209,7 +201,6 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -259,13 +250,14 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
@@ -279,19 +271,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -299,20 +294,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -320,8 +315,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -334,9 +329,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -348,16 +343,16 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -384,6 +379,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -407,19 +403,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -457,6 +442,7 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -541,6 +527,9 @@ CONFIG_SUN3LANCE=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -610,6 +599,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
@@ -664,11 +654,11 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -678,6 +668,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -703,6 +694,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
@@ -724,6 +716,8 @@ CONFIG_FB=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -750,6 +744,12 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -758,6 +758,8 @@ CONFIG_HIDRAW=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -771,8 +773,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+CONFIG_JBD2=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -783,6 +786,7 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -794,6 +798,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -832,6 +837,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -875,6 +881,7 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -948,7 +955,13 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -956,6 +969,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
@@ -966,10 +980,12 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
@@ -1043,14 +1059,17 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 765c8e287d2b..364ca8938807 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -48,7 +48,7 @@ config RUNTIME_DEBUG
 	help
 	  If you say Y here, some debugging macros will do run-time checking.
 	  If you say N here, those macros will mostly turn to no-ops.  See
-	  include/asm-mips/debug.h for debuging macros.
+	  arch/mips/include/asm/debug.h for debugging macros.
 	  If unsure, say N.
 
 endmenu
diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig
index 620980081a30..b6698a232ae9 100644
--- a/arch/mips/configs/fulong_defconfig
+++ b/arch/mips/configs/fulong_defconfig
@@ -1,63 +1,78 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Mon Jun 11 00:23:51 2007
+# Linux kernel version: 2.6.28-rc6
+# Fri Nov 28 17:53:48 2008
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_LEMOTE_FULONG=y
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+CONFIG_LEMOTE_FULONG=y
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
 CONFIG_I8259=y
 # CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
 
 #
 # CPU selection
@@ -75,6 +90,7 @@ CONFIG_CPU_LOONGSON2=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -101,7 +117,6 @@ CONFIG_BOARD_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_WB=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -109,6 +124,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_SYS_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -117,9 +133,17 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -133,37 +157,40 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="lm32"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -175,6 +202,8 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -183,29 +212,33 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
@@ -219,19 +252,19 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_ISA=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -239,8 +272,9 @@ CONFIG_MMU=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
@@ -251,14 +285,12 @@ CONFIG_BINFMT_ELF32=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 CONFIG_NET=y
 
 #
@@ -271,6 +303,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -294,18 +327,17 @@ CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
@@ -313,53 +345,59 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK_ENABLED is not set
 # CONFIG_NF_CONNTRACK is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -371,6 +409,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -380,10 +419,6 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -392,23 +427,25 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_PHONET=m
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 # CONFIG_IEEE80211_CRYPT_CCMP is not set
 # CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
 # CONFIG_RFKILL is not set
+CONFIG_NET_9P=m
+# CONFIG_NET_9P_DEBUG is not set
 
 #
 # Device Drivers
@@ -417,14 +454,13 @@ CONFIG_IEEE80211_CRYPT_WEP=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
 # CONFIG_MTD_DEBUG is not set
@@ -443,6 +479,7 @@ CONFIG_MTD_BLOCK=m
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -482,6 +519,7 @@ CONFIG_MTD_PHYSMAP=m
 CONFIG_MTD_PHYSMAP_START=0x1fc00000
 CONFIG_MTD_PHYSMAP_LEN=0x80000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -506,21 +544,9 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
 # CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -534,32 +560,28 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
 CONFIG_IDE_TASK_IOCTL=y
 CONFIG_IDE_PROC_FS=y
@@ -568,24 +590,25 @@ CONFIG_IDE_PROC_FS=y
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -601,17 +624,28 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -644,88 +678,30 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+CONFIG_VETH=m
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=m
 
@@ -740,29 +716,32 @@ CONFIG_CICADA_PHY=m
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -773,7 +752,6 @@ CONFIG_NET_PCI=y
 # CONFIG_FORCEDETH is not set
 # CONFIG_CS89x0 is not set
 # CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -785,15 +763,21 @@ CONFIG_8139TOO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -801,20 +785,29 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -822,6 +815,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -830,7 +824,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -844,25 +837,17 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_NET_FC=y
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -870,6 +855,7 @@ CONFIG_NET_FC=y
 #
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -879,7 +865,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -900,9 +885,11 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=y
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
@@ -927,10 +914,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -951,105 +941,152 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 CONFIG_I2C_VIAPRO=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
 # CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
 CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_BT848 is not set
@@ -1058,17 +1095,46 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_CPIA2 is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
 # CONFIG_VIDEO_STRADIS is not set
 # CONFIG_VIDEO_SAA7134 is not set
 # CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
 # CONFIG_VIDEO_HEXIUM_ORION is not set
 # CONFIG_VIDEO_HEXIUM_GEMINI is not set
 # CONFIG_VIDEO_CX88 is not set
 # CONFIG_VIDEO_IVTV is not set
 # CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_SH_MOBILE_CEU=m
 CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
 # CONFIG_VIDEO_PVRUSB2 is not set
 # CONFIG_VIDEO_EM28XX is not set
 # CONFIG_VIDEO_USBVISION is not set
@@ -1079,7 +1145,6 @@ CONFIG_USB_KONICAWC=m
 CONFIG_USB_QUICKCAM_MESSENGER=m
 CONFIG_USB_ET61X251=m
 # CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_W9968CF is not set
 CONFIG_USB_OV511=m
 CONFIG_USB_SE401=m
 CONFIG_USB_SN9C102=m
@@ -1088,6 +1153,8 @@ CONFIG_USB_ZC0301=m
 CONFIG_USB_PWC=m
 # CONFIG_USB_PWC_DEBUG is not set
 # CONFIG_USB_ZR364XX is not set
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
 CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_CADET is not set
 # CONFIG_RADIO_RTRACK is not set
@@ -1104,33 +1171,30 @@ CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_TYPHOON is not set
 # CONFIG_RADIO_ZOLTRIX is not set
 # CONFIG_USB_DSBR is not set
-# CONFIG_DVB_CORE is not set
+CONFIG_USB_SI470X=m
+CONFIG_USB_MR800=m
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 CONFIG_FB_BACKLIGHT=y
@@ -1158,16 +1222,30 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -1176,20 +1254,14 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1201,28 +1273,22 @@ CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_RTCTIMER=m
-CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -1231,10 +1297,12 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_DARLA20 is not set
@@ -1259,6 +1327,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -1276,43 +1345,26 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_TRIDENT is not set
 CONFIG_SND_VIA82XX=m
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA MIPS devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_MIPS=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+CONFIG_HID_PID=y
 CONFIG_USB_HIDDEV=y
 
 #
@@ -1322,13 +1374,39 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MOUSE is not set
 
 #
-# USB support
-#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 
 #
 # Miscellaneous USB options
@@ -1338,35 +1416,46 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
 
 #
 # USB Host Controller Drivers
 #
+CONFIG_USB_C67X00_HCD=m
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_ISP1760_HCD=m
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=y
 CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1379,7 +1468,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
 # CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1387,15 +1478,10 @@ CONFIG_USB_LIBUSUAL=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1404,7 +1490,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+CONFIG_USB_SEVSEG=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1421,56 +1507,75 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_VST=m
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# RTC interfaces
 #
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# Real Time Clock
+# I2C RTC drivers
 #
-# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
-# DMA Engine support
+# SPI RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
 
 #
-# DMA Clients
+# Platform RTC drivers
 #
+CONFIG_RTC_DRV_CMOS=m
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# DMA Devices
+# on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1478,27 +1583,31 @@ CONFIG_USB_LIBUSUAL=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=y
@@ -1530,11 +1639,11 @@ CONFIG_NTFS_RW=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1550,25 +1659,23 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_OMFS_FS=m
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1576,7 +1683,7 @@ CONFIG_NFS_ACL_SUPPORT=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1616,10 +1723,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1660,30 +1763,31 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+CONFIG_DYNAMIC_PRINTK_DEBUG=y
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
 
 #
@@ -1691,64 +1795,113 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
+CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
 # CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_LZO=m
 
 #
-# Hardware crypto devices
+# Random Number Generation
 #
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
+CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index f719bf5e01aa..115822876417 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -1,30 +1,34 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug  7 12:39:49 2007
+# Linux kernel version: 2.6.28-rc6
+# Fri Nov 28 15:41:33 2008
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 CONFIG_SGI_IP22=y
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -35,34 +39,49 @@ CONFIG_SGI_IP22=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_ARC=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_I8259=y
 # CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
 CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
+CONFIG_SGI_HAS_INDYDOG=y
+CONFIG_SGI_HAS_HAL2=y
+CONFIG_SGI_HAS_SEEQ=y
+CONFIG_SGI_HAS_WD93=y
+CONFIG_SGI_HAS_ZILOG=y
+CONFIG_SGI_HAS_I8042=y
+CONFIG_DEFAULT_SGI_PARTITION=y
 CONFIG_ARC32=y
 CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_L1_CACHE_SHIFT=7
 CONFIG_ARC_CONSOLE=y
 CONFIG_ARC_PROMLIB=y
 
@@ -82,6 +101,7 @@ CONFIG_ARC_PROMLIB=y
 # CONFIG_CPU_TX49XX is not set
 CONFIG_CPU_R5000=y
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -115,18 +135,24 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -159,13 +185,20 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -177,6 +210,8 @@ CONFIG_KALLSYMS=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -185,14 +220,21 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -203,6 +245,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -216,6 +259,8 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -224,29 +269,24 @@ CONFIG_HW_HAS_EISA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_EISA is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -259,6 +299,8 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -282,42 +324,13 @@ CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -334,12 +347,16 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
@@ -347,12 +364,12 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -366,18 +383,22 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -386,39 +407,75 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT=y
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -426,11 +483,13 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -439,32 +498,30 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -479,6 +536,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -488,12 +546,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
 
 #
 # Queueing/Scheduling
@@ -502,7 +555,7 @@ CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -526,6 +579,7 @@ CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
 # CONFIG_NET_EMATCH is not set
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
@@ -533,35 +587,28 @@ CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
 CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_ACT_SKBEDIT=m
 # CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_PHONET=m
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
+# CONFIG_WIRELESS is not set
 CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
 CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 CONFIG_RFKILL=m
 CONFIG_RFKILL_INPUT=m
 # CONFIG_NET_9P is not set
@@ -588,7 +635,9 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -628,20 +677,22 @@ CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 CONFIG_SGIWD93_SCSI=y
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
+CONFIG_VETH=m
 CONFIG_PHYLIB=m
 
 #
@@ -656,11 +707,21 @@ CONFIG_CICADA_PHY=m
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=m
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=m
 # CONFIG_AX88796 is not set
+CONFIG_SMC91X=m
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 CONFIG_SGISEEQ=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -672,12 +733,12 @@ CONFIG_WLAN_PRE80211=y
 CONFIG_STRIP=m
 CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
+# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_HOSTAP=m
 # CONFIG_HOSTAP_FIRMWARE is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -699,7 +760,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -720,6 +780,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 # CONFIG_MOUSE_PS2_SYNAPTICS is not set
 # CONFIG_MOUSE_PS2_LIFEBOOK is not set
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
@@ -742,9 +803,11 @@ CONFIG_SERIO_RAW=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -761,6 +824,17 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=m
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -769,47 +843,50 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_INDYDOG=m
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# SPI support
+# Sonics Silicon Backplane
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
@@ -823,48 +900,77 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SGI_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+CONFIG_HID_PID=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RTC_DRV_DS1286=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -876,29 +982,33 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=m
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
@@ -929,11 +1039,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=m
 
 #
@@ -949,27 +1059,25 @@ CONFIG_CONFIGFS_FS=m
 CONFIG_EFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -977,7 +1085,7 @@ CONFIG_NFS_ACL_SUPPORT=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -986,12 +1094,12 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_UPCALL=y
 # CONFIG_CIFS_XATTR is not set
 # CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -1015,10 +1123,6 @@ CONFIG_SGI_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1059,30 +1163,32 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 CONFIG_DLM=m
 # CONFIG_DLM_DEBUG is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+CONFIG_DYNAMIC_PRINTK_DEBUG=y
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
 
 #
@@ -1091,46 +1197,97 @@ CONFIG_CMDLINE=""
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 # CONFIG_CRYPTO_HW is not set
 
 #
@@ -1139,12 +1296,15 @@ CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_BITREVERSE=m
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=m
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index fe4699df9626..de4c7a0a96dd 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -1,71 +1,71 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:33 2007
+# Linux kernel version: 2.6.28-rc7
+# Wed Dec 10 14:39:08 2008
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 CONFIG_SGI_IP32=y
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_ARC=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
 CONFIG_ARC32=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -75,6 +75,7 @@ CONFIG_ARC_PROMLIB=y
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -87,6 +88,7 @@ CONFIG_ARC_PROMLIB=y
 # CONFIG_CPU_TX49XX is not set
 CONFIG_CPU_R5000=y
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -116,65 +118,73 @@ CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -184,27 +194,43 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
@@ -213,59 +239,50 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_MIPS32_O32=y
-# CONFIG_MIPS32_N32 is not set
+CONFIG_MIPS32_N32=y
 CONFIG_BINFMT_ELF32=y
 
 #
 # Power management options
 #
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -273,56 +290,83 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
 CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -332,10 +376,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -343,15 +383,14 @@ CONFIG_NETWORK_SECMARK=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -360,60 +399,40 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
-
-#
-# Misc devices
-#
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_SGI_IOC4=y
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -421,19 +440,20 @@ CONFIG_SGI_IOC4=y
 #
 CONFIG_RAID_ATTRS=y
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_CHR_DEV_OSST=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
 
 #
@@ -443,35 +463,36 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 CONFIG_SCSI_SAS_ATTRS=y
 CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_HOST_SMP=y
 # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
 CONFIG_AIC7XXX_RESET_DELAY_MS=15000
 CONFIG_AIC7XXX_DEBUG_ENABLE=y
 CONFIG_AIC7XXX_DEBUG_MASK=0
 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=y
-# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -482,6 +503,7 @@ CONFIG_SCSI_AIC94XX=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -492,147 +514,81 @@ CONFIG_SCSI_AIC94XX=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
 CONFIG_SGI_O2MACE_ETH=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=y
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=y
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=y
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -640,6 +596,7 @@ CONFIG_NETXEN_NIC=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -649,16 +606,32 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -669,8 +642,8 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_MACEPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_MACEPS2=y
+CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=y
 # CONFIG_GAMEPORT is not set
 
@@ -678,10 +651,13 @@ CONFIG_SERIO_RAW=y
 # Character devices
 #
 CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -702,192 +678,304 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# I2C support
+# Watchdog Device Drivers
 #
-# CONFIG_I2C is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 
 #
-# SPI support
+# PCI-based Watchdog Cards
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
-# CONFIG_VIDEO_DEV is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia core support
 #
-# CONFIG_DVB is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+CONFIG_DAB=y
 
 #
-# Console display driver support
+# Graphics support
 #
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_GBE=y
+CONFIG_FB_GBE_MEM=4
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# HID Devices
+# Console display driver support
 #
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_SGI_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
+# Special HID drivers
 #
+CONFIG_HID_COMPAT=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# RTC interfaces
 #
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# Real Time Clock
+# SPI RTC drivers
 #
-# CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
+# Platform RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -896,11 +984,11 @@ CONFIG_GENERIC_ACL=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
 
 #
@@ -916,33 +1004,42 @@ CONFIG_CONFIGFS_FS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -953,45 +1050,83 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_AMIGA_PARTITION is not set
 # CONFIG_ATARI_PARTITION is not set
 # CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=y
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
 
 #
@@ -1000,51 +1135,99 @@ CONFIG_CMDLINE=""
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_CAMELLIA=y
 CONFIG_CRYPTO_CAST5=y
 CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
 CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CAMELLIA=y
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Hardware crypto devices
+# Random Number Generation
 #
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
@@ -1052,10 +1235,15 @@ CONFIG_CRYPTO_CAMELLIA=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 74daa0cf87e6..1ecdd3b65dc7 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug  7 12:59:29 2007
+# Linux kernel version: 2.6.28-rc6
+# Mon Dec  1 08:08:19 2008
 #
 CONFIG_MIPS=y
 
@@ -11,20 +11,25 @@ CONFIG_MIPS=y
 CONFIG_ZONE_DMA=y
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
 CONFIG_MIPS_MALTA=y
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -35,13 +40,14 @@ CONFIG_MIPS_MALTA=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -51,21 +57,26 @@ CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_BOOT_RAW=y
 CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_HOTPLUG_CPU is not set
 CONFIG_I8259=y
 CONFIG_MIPS_BONITO64=y
 CONFIG_MIPS_MSC=y
 # CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
+CONFIG_IRQ_GIC=y
+CONFIG_MIPS_BOARDS_GEN=y
 CONFIG_PCI_GT64XXX_PCI0=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_BOOT_ELF32=y
@@ -74,10 +85,6 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 CONFIG_CPU_MIPS32_R2=y
@@ -91,6 +98,7 @@ CONFIG_CPU_MIPS32_R2=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -108,6 +116,7 @@ CONFIG_CPU_MIPSR2=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -125,6 +134,8 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_SMP=y
 # CONFIG_MIPS_MT_SMTC is not set
 CONFIG_MIPS_MT=y
+# CONFIG_SCHED_SMT is not set
+CONFIG_SYS_SUPPORTS_SCHED_SMT=y
 CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 CONFIG_MIPS_MT_FPAFF=y
 # CONFIG_MIPS_VPE_LOADER is not set
@@ -132,7 +143,6 @@ CONFIG_CPU_HAS_LLSC=y
 # CONFIG_CPU_HAS_SMARTMIPS is not set
 CONFIG_CPU_MIPSR2_IRQ_VI=y
 CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_SRS=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -140,22 +150,30 @@ CONFIG_IRQ_PER_CPU=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_SYS_SUPPORTS_SMARTMIPS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_SMP=y
+CONFIG_SMP_UP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS_DEFAULT_2=y
 CONFIG_NR_CPUS=2
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
@@ -168,7 +186,6 @@ CONFIG_HZ=100
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
 # CONFIG_KEXEC is not set
 CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -189,13 +206,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+CONFIG_PID_NS=y
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -207,6 +230,8 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -215,14 +240,23 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -234,6 +268,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -247,19 +282,19 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
 CONFIG_I8253=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -267,6 +302,8 @@ CONFIG_I8253=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
@@ -274,12 +311,7 @@ CONFIG_TRAD_SIGNALS=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,6 +324,8 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -323,42 +357,13 @@ CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -375,11 +380,15 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 CONFIG_BRIDGE_NETFILTER=y
 
 #
@@ -388,12 +397,12 @@ CONFIG_BRIDGE_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -407,18 +416,22 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -427,40 +440,76 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
 # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -468,11 +517,13 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -481,40 +532,34 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -523,6 +568,7 @@ CONFIG_BRIDGE_EBT_802_3=m
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -535,6 +581,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
 # CONFIG_IP_DCCP is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
@@ -544,8 +591,12 @@ CONFIG_IP_SCTP=m
 CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_GARP=m
 CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -559,12 +610,7 @@ CONFIG_IPDDP_DECAP=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
 
 #
 # Queueing/Scheduling
@@ -573,7 +619,7 @@ CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -597,6 +643,7 @@ CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
 # CONFIG_NET_EMATCH is not set
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
@@ -604,37 +651,51 @@ CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
 CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_PHONET=m
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 CONFIG_RFKILL=m
 CONFIG_RFKILL_INPUT=m
+CONFIG_RFKILL_LEDS=y
 # CONFIG_NET_9P is not set
 
 #
@@ -644,9 +705,12 @@ CONFIG_RFKILL_INPUT=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
@@ -655,6 +719,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -667,6 +732,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=m
 
 #
 # RAM/ROM/Flash chip drivers
@@ -701,6 +767,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -748,25 +815,26 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
@@ -775,24 +843,25 @@ CONFIG_IDE_PROC_FS=y
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -808,10 +877,7 @@ CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -848,8 +914,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=m
 CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_FC_TGT_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 CONFIG_BLK_DEV_3W_XXXX_RAID=m
@@ -866,6 +934,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -876,6 +945,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -887,6 +957,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -905,32 +976,28 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
 # CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
 CONFIG_IFB=m
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
+CONFIG_VETH=m
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=m
 
@@ -946,26 +1013,34 @@ CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
 CONFIG_ICPLUS_PHY=m
-# CONFIG_FIXED_PHY is not set
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=m
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_AX88796=m
+# CONFIG_AX88796_93CX6 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_TC35815=m
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -973,16 +1048,21 @@ CONFIG_TC35815=m
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -995,14 +1075,24 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3=m
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 CONFIG_NETXEN_NIC=m
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -1022,6 +1112,7 @@ CONFIG_IPW2200_QOS=y
 # CONFIG_IPW2200_DEBUG is not set
 CONFIG_LIBERTAS=m
 # CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
 CONFIG_HERMES=m
 CONFIG_PLX_HERMES=m
 CONFIG_TMD_HERMES=m
@@ -1030,25 +1121,30 @@ CONFIG_PCI_HERMES=m
 CONFIG_ATMEL=m
 CONFIG_PCI_ATMEL=m
 CONFIG_PRISM54=m
+# CONFIG_RTL8180 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWL3945 is not set
 CONFIG_HOSTAP=m
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 CONFIG_HOSTAP_PLX=m
 CONFIG_HOSTAP_PCI=m
-CONFIG_BCM43XX=m
-CONFIG_BCM43XX_DEBUG=y
-CONFIG_BCM43XX_DMA=y
-CONFIG_BCM43XX_PIO=y
-CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_DMA_MODE is not set
-# CONFIG_BCM43XX_PIO_MODE is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_RT2X00 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -1070,7 +1166,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -1099,10 +1194,13 @@ CONFIG_SERIO_SERPORT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -1124,101 +1222,165 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
-CONFIG_RTC=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 CONFIG_UIO=m
 CONFIG_UIO_CIF=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1230,9 +1392,8 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
@@ -1246,22 +1407,22 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -1291,11 +1452,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1312,46 +1473,48 @@ CONFIG_EFS_FS=m
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 CONFIG_JFFS2_FS_XATTR=y
 CONFIG_JFFS2_FS_POSIX_ACL=y
 CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
 # CONFIG_JFFS2_CMODE_NONE is not set
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_UBIFS_FS is not set
 CONFIG_CRAMFS=m
 CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1365,10 +1528,6 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1409,29 +1568,30 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
 
 #
@@ -1439,51 +1599,103 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
@@ -1491,7 +1703,8 @@ CONFIG_CRYPTO_HW=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index 7a881755800f..6c8342ae74db 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -35,6 +35,16 @@
 	mtc0	\reg, CP0_TCSTATUS
 	_ehb
 	.endm
+#elif defined(CONFIG_CPU_MIPSR2)
+	.macro	local_irq_enable reg=t0
+	ei
+	irq_enable_hazard
+	.endm
+
+	.macro	local_irq_disable reg=t0
+	di
+	irq_disable_hazard
+	.endm
 #else
 	.macro	local_irq_enable reg=t0
 	mfc0	\reg, CP0_STATUS
diff --git a/arch/mips/include/asm/bug.h b/arch/mips/include/asm/bug.h
index 7eb63de808bc..08ea46863fe5 100644
--- a/arch/mips/include/asm/bug.h
+++ b/arch/mips/include/asm/bug.h
@@ -7,20 +7,31 @@
 
 #include <asm/break.h>
 
-#define BUG()								\
-do {									\
-	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));		\
-} while (0)
+static inline void __noreturn BUG(void)
+{
+	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));
+	/* Fool GCC into thinking the function doesn't return. */
+	while (1)
+		;
+}
 
 #define HAVE_ARCH_BUG
 
 #if (_MIPS_ISA > _MIPS_ISA_MIPS1)
 
-#define BUG_ON(condition)						\
-do {									\
-	__asm__ __volatile__("tne $0, %0, %1"				\
-			     : : "r" (condition), "i" (BRK_BUG));	\
-} while (0)
+static inline void  __BUG_ON(unsigned long condition)
+{
+	if (__builtin_constant_p(condition)) {
+		if (condition)
+			BUG();
+		else
+			return;
+	}
+	__asm__ __volatile__("tne $0, %0, %1"
+			     : : "r" (condition), "i" (BRK_BUG));
+}
+
+#define BUG_ON(C) __BUG_ON((unsigned long)(C))
 
 #define HAVE_ARCH_BUG_ON
 
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 5510c53b7feb..053e4634acee 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -79,6 +79,11 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
 	/* We don't do dynamic PCI IRQ allocation */
 }
 
+#define HAVE_PCI_MMAP
+
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+	enum pci_mmap_state mmap_state, int write_combine);
+
 /*
  * Dynamic DMA mapping stuff.
  * MIPS has everything mapped statically.
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index 813abd16255d..c2c8bac43307 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -9,10 +9,6 @@
 #ifndef _ASM_PTRACE_H
 #define _ASM_PTRACE_H
 
-#ifdef CONFIG_64BIT
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-#endif
-
 /* 0 - 31 are integer registers, 32 - 63 are fp registers.  */
 #define FPR_BASE	32
 #define PC		64
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 759f68066b5d..d0916a55cd77 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -262,14 +262,11 @@ bad_alignment:
 	LEAF(sys_syscall)
 	subu	t0, a0, __NR_O32_Linux	# check syscall number
 	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
+	beqz	t0, einval		# do not recurse
 	sll	t1, t0, 3
 	beqz	v0, einval
-
 	lw	t2, sys_call_table(t1)		# syscall routine
 
-	li	v1, 4000 - __NR_O32_Linux	# index of sys_syscall
-	beq	t0, v1, einval			# do not recurse
-
 	/* Some syscalls like execve get their arguments from struct pt_regs
 	   and claim zero arguments in the syscall table. Thus we have to
 	   assume the worst case and shuffle around all potential arguments.
@@ -627,7 +624,7 @@ einval:	li	v0, -ENOSYS
 	sys	sys_pselect6		6
 	sys	sys_ppoll		5
 	sys	sys_unshare		1
-	sys	sys_splice		4
+	sys	sys_splice		6
 	sys	sys_sync_file_range	7	/* 4305 */
 	sys	sys_tee			4
 	sys	sys_vmsplice		4
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index e266b3aa6560..30f3b6317a83 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -390,7 +390,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_splice
 	PTR	sys_sync_file_range
 	PTR	sys_tee
-	PTR	sys_vmsplice			/* 6270 */
+	PTR	compat_sys_vmsplice		/* 6270 */
 	PTR	sys_move_pages
 	PTR	compat_sys_set_robust_list
 	PTR	compat_sys_get_robust_list
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 6c7ef8313ebd..fefef4af8595 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -174,14 +174,12 @@ not_o32_scall:
 	END(handle_sys)
 
 LEAF(sys32_syscall)
-	sltu	v0, a0, __NR_O32_Linux + __NR_O32_Linux_syscalls + 1
+	subu	t0, a0, __NR_O32_Linux	# check syscall number
+	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
+	beqz	t0, einval		# do not recurse
+	dsll	t1, t0, 3
 	beqz	v0, einval
-
-	dsll	v0, a0, 3
-	ld	t2, (sys_call_table - (__NR_O32_Linux * 8))(v0)
-
-	li	v1, 4000		# indirect syscall number
-	beq	a0, v1, einval		# do not recurse
+	ld	t2, sys_call_table(t1)		# syscall routine
 
 	move	a0, a1			# shift argument registers
 	move	a1, a2
@@ -198,7 +196,7 @@ LEAF(sys32_syscall)
 	jr	t2
 	/* Unreached */
 
-einval:	li	v0, -EINVAL
+einval:	li	v0, -ENOSYS
 	jr	ra
 	END(sys32_syscall)
 
@@ -512,7 +510,7 @@ sys_call_table:
 	PTR	sys_splice
 	PTR	sys32_sync_file_range		/* 4305 */
 	PTR	sys_tee
-	PTR	sys_vmsplice
+	PTR	compat_sys_vmsplice
 	PTR	compat_sys_move_pages
 	PTR	compat_sys_set_robust_list
 	PTR	compat_sys_get_robust_list	/* 4310 */
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 972b2d2b8401..a1b3da6bad5c 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1134,7 +1134,7 @@ static int vpe_release(struct inode *inode, struct file *filp)
 
 	/* It's good to be able to run the SP and if it chokes have a look at
 	   the /dev/rt?. But if we reset the pointer to the shared struct we
-	   loose what has happened. So perhaps if garbage is sent to the vpe
+	   lose what has happened. So perhaps if garbage is sent to the vpe
 	   device, use it as a trigger for the reset. Hopefully a nice
 	   executable will be along shortly. */
 	if (ret < 0)
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 5b98d0e731c2..e6708b3ad343 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -111,6 +111,7 @@ EXPORT_SYMBOL(dma_alloc_coherent);
 void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
 	dma_addr_t dma_handle)
 {
+	plat_unmap_dma_mem(dma_handle);
 	free_pages((unsigned long) vaddr, get_order(size));
 }
 
@@ -121,6 +122,8 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
 {
 	unsigned long addr = (unsigned long) vaddr;
 
+	plat_unmap_dma_mem(dma_handle);
+
 	if (!plat_device_is_coherent(dev))
 		addr = CAC_ADDR(addr);
 
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index cef2db8d2225..32e847808df1 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -7,9 +7,8 @@
 #
 obj-y				:= malta-amon.o malta-cmdline.o \
 				   malta-display.o malta-init.o malta-int.o \
-				   malta-memory.o malta-mtd.o \
-				   malta-platform.o malta-reset.o \
-				   malta-setup.o malta-time.o
+				   malta-memory.o malta-platform.o \
+				   malta-reset.o malta-setup.o malta-time.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= malta-console.o
 obj-$(CONFIG_PCI)		+= malta-pci.o
diff --git a/arch/mips/mti-malta/malta-mtd.c b/arch/mips/mti-malta/malta-mtd.c
deleted file mode 100644
index 8ad9bdf25dce..000000000000
--- a/arch/mips/mti-malta/malta-mtd.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 MIPS Technologies, Inc.
- *     written by Ralf Baechle <ralf@linux-mips.org>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <mtd/mtd-abi.h>
-
-static struct mtd_partition malta_mtd_partitions[] = {
-	{
-		.name =		"YAMON",
-		.offset =	0x0,
-		.size =		0x100000,
-		.mask_flags =	MTD_WRITEABLE
-	}, {
-		.name =		"User FS",
-		.offset = 	0x100000,
-		.size =		0x2e0000
-	}, {
-		.name =		"Board Config",
-		.offset =	0x3e0000,
-		.size =		0x020000,
-		.mask_flags =	MTD_WRITEABLE
-	}
-};
-
-static struct physmap_flash_data malta_flash_data = {
-	.width		= 4,
-	.nr_parts	= ARRAY_SIZE(malta_mtd_partitions),
-	.parts		= malta_mtd_partitions
-};
-
-static struct resource malta_flash_resource = {
-	.start		= 0x1e000000,
-	.end		= 0x1e3fffff,
-	.flags		= IORESOURCE_MEM
-};
-
-static struct platform_device malta_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &malta_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &malta_flash_resource,
-};
-
-static int __init malta_mtd_init(void)
-{
-	platform_device_register(&malta_flash);
-
-	return 0;
-}
-
-module_init(malta_mtd_init)
diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c
index 83b9bab3cd3f..72e32a7715be 100644
--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -3,10 +3,14 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2006, 07 MIPS Technologies, Inc.
  *   written by Ralf Baechle (ralf@linux-mips.org)
+ *     written by Ralf Baechle <ralf@linux-mips.org>
  *
- * Probe driver for the Malta's UART ports:
+ * Copyright (C) 2008 Wind River Systems, Inc.
+ *   updated by Tiejun Chen <tiejun.chen@windriver.com>
+ *
+ * 1. Probe driver for the Malta's UART ports:
  *
  *   o 2 ports in the SMC SuperIO
  *   o 1 port in the CBUS UART, a discrete 16550 which normally is only used
@@ -14,10 +18,17 @@
  *
  * We don't use 8250_platform.c on Malta as it would result in the CBUS
  * UART becoming ttyS0.
+ *
+ * 2. Register RTC-CMOS platform device on Malta.
  */
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/serial_8250.h>
+#include <linux/mc146818rtc.h>
+#include <linux/module.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <mtd/mtd-abi.h>
 
 #define SMC_PORT(base, int)						\
 {									\
@@ -45,21 +56,93 @@ static struct plat_serial8250_port uart8250_data[] = {
 	{ },
 };
 
-static struct platform_device uart8250_device = {
+static struct platform_device malta_uart8250_device = {
 	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM2,
+	.id			= PLAT8250_DEV_PLATFORM,
 	.dev			= {
 		.platform_data	= uart8250_data,
 	},
 };
 
-static int __init uart8250_init(void)
+struct resource malta_rtc_resources[] = {
+	{
+		.start	= RTC_PORT(0),
+		.end	= RTC_PORT(7),
+		.flags	= IORESOURCE_IO,
+	}, {
+		.start	= RTC_IRQ,
+		.end	= RTC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device malta_rtc_device = {
+	.name		= "rtc_cmos",
+	.id		= -1,
+	.resource	= malta_rtc_resources,
+	.num_resources	= ARRAY_SIZE(malta_rtc_resources),
+};
+
+static struct mtd_partition malta_mtd_partitions[] = {
+	{
+		.name =		"YAMON",
+		.offset =	0x0,
+		.size =		0x100000,
+		.mask_flags =	MTD_WRITEABLE
+	}, {
+		.name =		"User FS",
+		.offset = 	0x100000,
+		.size =		0x2e0000
+	}, {
+		.name =		"Board Config",
+		.offset =	0x3e0000,
+		.size =		0x020000,
+		.mask_flags =	MTD_WRITEABLE
+	}
+};
+
+static struct physmap_flash_data malta_flash_data = {
+	.width		= 4,
+	.nr_parts	= ARRAY_SIZE(malta_mtd_partitions),
+	.parts		= malta_mtd_partitions
+};
+
+static struct resource malta_flash_resource = {
+	.start		= 0x1e000000,
+	.end		= 0x1e3fffff,
+	.flags		= IORESOURCE_MEM
+};
+
+static struct platform_device malta_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &malta_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &malta_flash_resource,
+};
+
+static struct platform_device *malta_devices[] __initdata = {
+	&malta_uart8250_device,
+	&malta_rtc_device,
+	&malta_flash_device,
+};
+
+static int __init malta_add_devices(void)
 {
-	return platform_device_register(&uart8250_device);
-}
+	int err;
 
-module_init(uart8250_init);
+	err = platform_add_devices(malta_devices, ARRAY_SIZE(malta_devices));
+	if (err)
+		return err;
+
+	/*
+	 * Set RTC to BCD mode to support current alarm code.
+	 */
+	CMOS_WRITE(CMOS_READ(RTC_CONTROL) & ~RTC_DM_BINARY, RTC_CONTROL);
+
+	return 0;
+}
 
-MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the Malta CBUS UART");
+device_initcall(malta_add_devices);
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index a377e9d2d029..62cae740e250 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -354,6 +354,30 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO);
 EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
 #endif
 
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine)
+{
+	unsigned long prot;
+
+	/*
+	 * I/O space can be accessed via normal processor loads and stores on
+	 * this platform but for now we elect not to do this and portable
+	 * drivers should not do this anyway.
+	 */
+	if (mmap_state == pci_mmap_io)
+		return -EINVAL;
+
+	/*
+	 * Ignore write-combine; for now only return uncached mappings.
+	 */
+	prot = pgprot_val(vma->vm_page_prot);
+	prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED;
+	vma->vm_page_prot = __pgprot(prot);
+
+	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+		vma->vm_end - vma->vm_start, vma->vm_page_prot);
+}
+
 char * (*pcibios_plat_setup)(char *str) __devinitdata;
 
 char *__devinit pcibios_setup(char *str)
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index b7cbb1487af4..62fba8aa9b6e 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -180,6 +180,7 @@ ENTRY(resume_userspace)
 
 #ifdef CONFIG_PREEMPT
 ENTRY(resume_kernel)
+	__cli
 	mov	(TI_preempt_count,a2),d0	# non-zero preempt_count ?
 	cmp	0,d0
 	bne	restore_all
@@ -190,7 +191,7 @@ need_resched:
 	mov	(REG_EPSW,fp),d0
 	and	EPSW_IM,d0
 	cmp	EPSW_IM_7,d0		# interrupts off (exception path) ?
-	beq	restore_all
+	bne	restore_all
 	call	preempt_schedule_irq[],0
 	jmp	need_resched
 #endif
diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c
index 9a6d4e8ebe73..11584c51acd9 100644
--- a/arch/mn10300/kernel/gdb-io-serial.c
+++ b/arch/mn10300/kernel/gdb-io-serial.c
@@ -99,6 +99,7 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
  try_again:
 	/* pull chars out of the buffer */
 	ix = gdbstub_rx_outp;
+	barrier();
 	if (ix == gdbstub_rx_inp) {
 		if (nonblock)
 			return -EAGAIN;
@@ -110,6 +111,7 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
 
 	ch = gdbstub_rx_buffer[ix++];
 	st = gdbstub_rx_buffer[ix++];
+	barrier();
 	gdbstub_rx_outp = ix & 0x00000fff;
 
 	if (st & UART_LSR_BI) {
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index 54be6afb5555..0ea7482c1522 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -522,17 +522,7 @@ static int gdbstub_single_step(struct pt_regs *regs)
 	} else {
 		switch (cur) {
 			/* Bxx (d8,PC) */
-		case 0xc0:
-		case 0xc1:
-		case 0xc2:
-		case 0xc3:
-		case 0xc4:
-		case 0xc5:
-		case 0xc6:
-		case 0xc7:
-		case 0xc8:
-		case 0xc9:
-		case 0xca:
+		case 0xc0 ... 0xca:
 			if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0)
 				goto fault;
 			if (!__gdbstub_mark_bp(pc + 2, 0))
@@ -543,17 +533,7 @@ static int gdbstub_single_step(struct pt_regs *regs)
 			break;
 
 			/* LXX (d8,PC) */
-		case 0xd0:
-		case 0xd1:
-		case 0xd2:
-		case 0xd3:
-		case 0xd4:
-		case 0xd5:
-		case 0xd6:
-		case 0xd7:
-		case 0xd8:
-		case 0xd9:
-		case 0xda:
+		case 0xd0 ... 0xda:
 			if (!__gdbstub_mark_bp(pc + 1, 0))
 				goto fault;
 			if (regs->pc != regs->lar &&
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index aa07d0cd1905..59b9c4bf9583 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -566,6 +566,11 @@ static void mn10300_serial_transmit_interrupt(struct mn10300_serial_port *port)
 {
 	_enter("%s", port->name);
 
+	if (!port->uart.info || !port->uart.info->port.tty) {
+		mn10300_serial_dis_tx_intr(port);
+		return;
+	}
+
 	if (uart_tx_stopped(&port->uart) ||
 	    uart_circ_empty(&port->uart.info->xmit))
 		mn10300_serial_dis_tx_intr(port);
diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c
index 8fa36893df7a..6b287f2e8e84 100644
--- a/arch/mn10300/kernel/module.c
+++ b/arch/mn10300/kernel/module.c
@@ -1,6 +1,6 @@
 /* MN10300 Kernel module helper routines
  *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2007, 2008 Red Hat, Inc. All Rights Reserved.
  * Written by Mark Salter (msalter@redhat.com)
  * - Derived from arch/i386/kernel/module.c
  *
@@ -64,21 +64,6 @@ int module_frob_arch_sections(Elf_Ehdr *hdr,
 	return 0;
 }
 
-static uint32_t reloc_get16(uint8_t *p)
-{
-	return p[0] | (p[1] << 8);
-}
-
-static uint32_t reloc_get24(uint8_t *p)
-{
-	return reloc_get16(p) | (p[2] << 16);
-}
-
-static uint32_t reloc_get32(uint8_t *p)
-{
-	return reloc_get16(p) | (reloc_get16(p+2) << 16);
-}
-
 static void reloc_put16(uint8_t *p, uint32_t val)
 {
 	p[0] = val & 0xff;
@@ -144,25 +129,19 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 		relocation = sym->st_value + rel[i].r_addend;
 
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
-			/* for the first four relocation types, we add the
-			 * adjustment into the value at the location given */
+			/* for the first four relocation types, we simply
+			 * store the adjustment at the location given */
 		case R_MN10300_32:
-			value = reloc_get32(location);
-			value += relocation;
-			reloc_put32(location, value);
+			reloc_put32(location, relocation);
 			break;
 		case R_MN10300_24:
-			value = reloc_get24(location);
-			value += relocation;
-			reloc_put24(location, value);
+			reloc_put24(location, relocation);
 			break;
 		case R_MN10300_16:
-			value = reloc_get16(location);
-			value += relocation;
-			reloc_put16(location, value);
+			reloc_put16(location, relocation);
 			break;
 		case R_MN10300_8:
-			*location += relocation;
+			*location = relocation;
 			break;
 
 			/* for the next three relocation types, we write the
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
index 017121ce896f..e1d88ab51008 100644
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -161,7 +161,7 @@ void __init setup_arch(char **cmdline_p)
 	   reserve the page it is occupying. */
 	if (CONFIG_INTERRUPT_VECTOR_BASE >= CONFIG_KERNEL_RAM_BASE_ADDRESS &&
 	    CONFIG_INTERRUPT_VECTOR_BASE < memory_end)
-		reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, 1,
+		reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, PAGE_SIZE,
 				BOOTMEM_DEFAULT);
 
 	reserve_bootmem(PAGE_ALIGN(PFN_PHYS(free_pfn)), bootmap_size,
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index a3e80f444f55..b8259668f7dc 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -11,6 +11,7 @@
 #define __VMLINUX_LDS__
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
+#include <asm/page.h>
 
 OUTPUT_FORMAT("elf32-am33lin", "elf32-am33lin", "elf32-am33lin")
 OUTPUT_ARCH(mn10300)
@@ -55,13 +56,13 @@ SECTIONS
 	CONSTRUCTORS
 	}
 
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   __nosave_begin = .;
   .data_nosave : { *(.data.nosave) }
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   __nosave_end = .;
 
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   .data.page_aligned : { *(.data.idt) }
 
   . = ALIGN(32);
@@ -78,7 +79,7 @@ SECTIONS
   .data.init_task : { *(.data.init_task) }
 
   /* might get freed after init */
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
   	__smp_locks = .;
 	*(.smp_locks)
@@ -86,7 +87,7 @@ SECTIONS
   }
 
   /* will be freed after init */
-  . = ALIGN(4096);		/* Init code and data */
+  . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
   .init.text : {
 	_sinittext = .;
@@ -120,17 +121,14 @@ SECTIONS
   .exit.data : { *(.exit.data) }
 
 #ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   __initramfs_start = .;
   .init.ramfs : { *(.init.ramfs) }
   __initramfs_end = .;
 #endif
 
-  . = ALIGN(32);
-  __per_cpu_start = .;
-  .data.percpu  : { *(.data.percpu) }
-  __per_cpu_end = .;
-  . = ALIGN(4096);
+  PERCPU(32)
+  . = ALIGN(PAGE_SIZE);
   __init_end = .;
   /* freed after init ends here */
 
@@ -145,7 +143,7 @@ SECTIONS
   _end = . ;
 
   /* This is where the kernel creates the early boot page tables */
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   pg0 = .;
 
   /* Sections to be discarded */
diff --git a/arch/parisc/include/asm/parisc-device.h b/arch/parisc/include/asm/parisc-device.h
index 7aa13f2add7a..9afdad6c2ffb 100644
--- a/arch/parisc/include/asm/parisc-device.h
+++ b/arch/parisc/include/asm/parisc-device.h
@@ -42,9 +42,9 @@ struct parisc_driver {
 #define to_parisc_driver(d)	container_of(d, struct parisc_driver, drv)
 #define parisc_parent(d)	to_parisc_device(d->dev.parent)
 
-static inline char *parisc_pathname(struct parisc_device *d)
+static inline const char *parisc_pathname(struct parisc_device *d)
 {
-	return d->dev.bus_id;
+	return dev_name(&d->dev);
 }
 
 static inline void
diff --git a/arch/parisc/include/asm/posix_types.h b/arch/parisc/include/asm/posix_types.h
index bb725a6630bb..00da29a340ba 100644
--- a/arch/parisc/include/asm/posix_types.h
+++ b/arch/parisc/include/asm/posix_types.h
@@ -24,13 +24,12 @@ typedef int			__kernel_daddr_t;
 typedef unsigned long		__kernel_size_t;
 typedef long			__kernel_ssize_t;
 typedef long			__kernel_ptrdiff_t;
-typedef long			__kernel_time_t;
 #else
 typedef unsigned int		__kernel_size_t;
 typedef int			__kernel_ssize_t;
 typedef int			__kernel_ptrdiff_t;
-typedef long			__kernel_time_t;
 #endif
+typedef long			__kernel_time_t;
 typedef char *			__kernel_caddr_t;
 
 typedef unsigned short		__kernel_uid16_t;
diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h
index afa5333187b4..302f68dc889c 100644
--- a/arch/parisc/include/asm/ptrace.h
+++ b/arch/parisc/include/asm/ptrace.h
@@ -47,8 +47,6 @@ struct pt_regs {
 
 #define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
 
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
 struct task_struct;
 #define arch_has_single_step()	1
 void user_disable_single_step(struct task_struct *task);
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index 2ca654bd6322..884b7ce16a3b 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -43,7 +43,7 @@ struct hppa_dma_ops *hppa_dma_ops __read_mostly;
 EXPORT_SYMBOL(hppa_dma_ops);
 
 static struct device root = {
-	.bus_id = "parisc",
+	.init_name = "parisc",
 };
 
 static inline int check_dev(struct device *dev)
@@ -393,7 +393,8 @@ EXPORT_SYMBOL(print_pci_hwpath);
 static void setup_bus_id(struct parisc_device *padev)
 {
 	struct hardware_path path;
-	char *output = padev->dev.bus_id;
+	char name[20];
+	char *output = name;
 	int i;
 
 	get_node_path(padev->dev.parent, &path);
@@ -404,6 +405,7 @@ static void setup_bus_id(struct parisc_device *padev)
 		output += sprintf(output, "%u:", (unsigned char) path.bc[i]);
 	}
 	sprintf(output, "%u", (unsigned char) padev->hw_path);
+	dev_set_name(&padev->dev, name);
 }
 
 struct parisc_device * create_tree_node(char id, struct device *parent)
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 675f1d098f05..4c771cd580ec 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -24,7 +24,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/console.h>
-#include <linux/kallsyms.h>
 #include <linux/bug.h>
 
 #include <asm/assembly.h>
@@ -51,7 +50,7 @@
 DEFINE_SPINLOCK(pa_dbit_lock);
 #endif
 
-void parisc_show_stack(struct task_struct *t, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
 	struct pt_regs *regs);
 
 static int printbinary(char *buf, unsigned long x, int nbits)
@@ -121,18 +120,19 @@ static void print_fr(char *level, struct pt_regs *regs)
 
 void show_regs(struct pt_regs *regs)
 {
-	int i;
+	int i, user;
 	char *level;
 	unsigned long cr30, cr31;
 
-	level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
+	user = user_mode(regs);
+	level = user ? KERN_DEBUG : KERN_CRIT;
 
 	print_gr(level, regs);
 
 	for (i = 0; i < 8; i += 4)
 		PRINTREGS(level, regs->sr, "sr", RFMT, i);
 
-	if (user_mode(regs))
+	if (user)
 		print_fr(level, regs);
 
 	cr30 = mfctl(30);
@@ -145,14 +145,18 @@ void show_regs(struct pt_regs *regs)
 	printk("%s CPU: %8d   CR30: " RFMT " CR31: " RFMT "\n",
 	       level, current_thread_info()->cpu, cr30, cr31);
 	printk("%s ORIG_R28: " RFMT "\n", level, regs->orig_r28);
-	printk(level);
-	print_symbol(" IAOQ[0]: %s\n", regs->iaoq[0]);
-	printk(level);
-	print_symbol(" IAOQ[1]: %s\n", regs->iaoq[1]);
-	printk(level);
-	print_symbol(" RP(r2): %s\n", regs->gr[2]);
-
-	parisc_show_stack(current, NULL, regs);
+
+	if (user) {
+		printk("%s IAOQ[0]: " RFMT "\n", level, regs->iaoq[0]);
+		printk("%s IAOQ[1]: " RFMT "\n", level, regs->iaoq[1]);
+		printk("%s RP(r2): " RFMT "\n", level, regs->gr[2]);
+	} else {
+		printk("%s IAOQ[0]: %pS\n", level, (void *) regs->iaoq[0]);
+		printk("%s IAOQ[1]: %pS\n", level, (void *) regs->iaoq[1]);
+		printk("%s RP(r2): %pS\n", level, (void *) regs->gr[2]);
+
+		parisc_show_stack(current, NULL, regs);
+	}
 }
 
 
@@ -173,20 +177,15 @@ static void do_show_stack(struct unwind_frame_info *info)
 			break;
 
 		if (__kernel_text_address(info->ip)) {
-			printk("%s [<" RFMT ">] ", (i&0x3)==1 ? KERN_CRIT : "", info->ip);
-#ifdef CONFIG_KALLSYMS
-			print_symbol("%s\n", info->ip);
-#else
-			if ((i & 0x03) == 0)
-				printk("\n");
-#endif
+			printk(KERN_CRIT " [<" RFMT ">] %pS\n",
+				info->ip, (void *) info->ip);
 			i++;
 		}
 	}
-	printk("\n");
+	printk(KERN_CRIT "\n");
 }
 
-void parisc_show_stack(struct task_struct *task, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
 	struct pt_regs *regs)
 {
 	struct unwind_frame_info info;
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 8fc6d72849ae..3d3daa674299 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -41,6 +41,7 @@ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
 
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 226ff066652b..dea30910c136 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -18,8 +18,8 @@
 	#size-cells = <1>;
 
 	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
+		ethernet0 = &enet1;
+		ethernet1 = &enet0;
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 2c9d54a35bc3..4bdbaf4993a1 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -91,6 +91,14 @@
 				interrupts = <18 0x8>;
 				interrupt-parent = <&ipic>;
 			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8349emitx",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
 		};
 
 		spi@7000 {
@@ -139,14 +147,6 @@
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
-
-			mcu_pio: mcu@a {
-				#gpio-cells = <2>;
-				compatible = "fsl,mc9s08qg8-mpc8349emitx",
-					     "fsl,mcu-mpc8349emitx";
-				reg = <0x0a>;
-				gpio-controller;
-			};
 		};
 
 		usb@22000 {
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index cadd4652a695..5c69b2fafd32 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -90,7 +90,7 @@
 			compatible = "fsl,mpc8572-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>;	// L2, 512K
+			cache-size = <0x100000>; // L2, 1M
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 		};
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
new file mode 100644
index 000000000000..9a9350ded292
--- /dev/null
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -0,0 +1,1176 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:49:16 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_XILINX_VIRTEX=y
+# CONFIG_ACADIA is not set
+# CONFIG_EP405 is not set
+# CONFIG_HCU4 is not set
+# CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
+# CONFIG_WALNUT is not set
+CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
+# CONFIG_PPC40x_SIMPLE is not set
+CONFIG_XILINX_VIRTEX_II_PRO=y
+CONFIG_XILINX_VIRTEX_4_FX=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XILINX_SYSACE=y
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=y
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 663ec512b33b..7513d360e0b0 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug  5 09:20:16 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:31:16 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -22,14 +22,13 @@ CONFIG_PHYS_64BIT=y
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -40,6 +39,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -93,8 +93,8 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -109,7 +109,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -122,10 +124,6 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -158,6 +156,7 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
@@ -174,9 +173,13 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
 # CONFIG_YOSEMITE is not set
 CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+# CONFIG_PPC44x_SIMPLE is not set
+# CONFIG_PPC4xx_GPIO is not set
 CONFIG_XILINX_VIRTEX=y
 CONFIG_XILINX_VIRTEX_5_FXT=y
 # CONFIG_IPIC is not set
@@ -196,7 +199,6 @@ CONFIG_XILINX_VIRTEX_5_FXT=y
 # Kernel options
 #
 # CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -211,6 +213,8 @@ CONFIG_HZ=250
 CONFIG_PREEMPT=y
 # CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
@@ -225,15 +229,15 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -256,6 +260,7 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -317,7 +322,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -352,8 +356,8 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
 # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
@@ -361,36 +365,38 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
 # CONFIG_NETFILTER_XT_MATCH_MAC is not set
 # CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
 # CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 # CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
 # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
 # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 # CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 # CONFIG_NETFILTER_XT_MATCH_SCTP is not set
 # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 # CONFIG_NETFILTER_XT_MATCH_STRING is not set
 # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
 # CONFIG_NETFILTER_XT_MATCH_TIME is not set
 # CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 # CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 # CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
 # CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 CONFIG_IP_NF_FILTER=m
 # CONFIG_IP_NF_TARGET_REJECT is not set
 # CONFIG_IP_NF_TARGET_LOG is not set
@@ -411,6 +417,7 @@ CONFIG_IP_NF_MANGLE=m
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -431,11 +438,10 @@ CONFIG_IP_NF_MANGLE=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -455,11 +461,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 CONFIG_FIRMWARE_IN_KERNEL=y
 CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -478,7 +486,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=y
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
@@ -487,6 +495,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -534,8 +543,12 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -556,6 +569,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -604,6 +618,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -611,9 +626,11 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -624,11 +641,11 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 #
 CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+CONFIG_SERIO_XILINX_XPS_PS2=y
 # CONFIG_GAMEPORT is not set
 
 #
@@ -656,11 +673,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -674,87 +692,41 @@ CONFIG_XILINX_HWICAP=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
-# I2C system bus drivers (mostly embedded / system-on-chip)
+# Memory mapped GPIO expanders:
 #
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
+CONFIG_GPIO_XILINX=y
 
 #
-# External I2C/SMBus adapter drivers
+# I2C GPIO expanders:
 #
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
+# PCI GPIO expanders:
 #
-# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_GPIO_BT8XX is not set
 
 #
-# Other I2C/SMBus bus drivers
+# SPI GPIO expanders:
 #
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_ALGO=y
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -763,6 +735,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -790,6 +764,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -826,6 +801,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
@@ -838,6 +814,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_IBM_GXT4500 is not set
 CONFIG_FB_XILINX=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -870,6 +848,7 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -879,6 +858,8 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -887,10 +868,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -899,7 +881,7 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -923,6 +905,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -954,19 +937,15 @@ CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1023,7 +1002,6 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1041,7 +1019,7 @@ CONFIG_HAVE_LMB=y
 #
 # Kernel hacking
 #
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
@@ -1049,19 +1027,62 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1069,12 +1090,14 @@ CONFIG_HAVE_ARCH_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1147,6 +1170,11 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index c10f7395aa1b..3df627494b65 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:11:37 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:12:40 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -102,6 +103,7 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
@@ -110,9 +112,13 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -123,6 +129,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -137,19 +144,16 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
@@ -159,7 +163,10 @@ CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -183,7 +190,6 @@ CONFIG_PPC_BESTCOMM_FEC=y
 # Kernel options
 #
 # CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -197,6 +203,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -211,19 +219,20 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,7 +242,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -254,10 +263,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -308,6 +313,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -328,14 +334,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -446,6 +446,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -487,11 +488,11 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -521,6 +522,9 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
@@ -532,7 +536,6 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
@@ -567,6 +570,7 @@ CONFIG_FEC_MPC52xx_MDIO=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -596,25 +600,40 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -623,10 +642,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -640,24 +662,39 @@ CONFIG_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -672,10 +709,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -695,11 +728,16 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_SOC=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -710,12 +748,16 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -744,7 +786,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -757,7 +798,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -773,14 +814,19 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -792,12 +838,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -830,6 +877,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -860,6 +908,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -870,14 +919,14 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -953,9 +1002,9 @@ CONFIG_NLS_ISO8859_1=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -982,9 +1031,12 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -998,16 +1050,37 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1018,14 +1091,19 @@ CONFIG_SCHED_DEBUG=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1063,6 +1141,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1093,6 +1175,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 1a8a250fa11b..5b969f9c925e 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:56 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:10:16 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -103,7 +104,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -111,24 +114,30 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -143,19 +152,16 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
@@ -165,7 +171,10 @@ CONFIG_PPC_LITE5200=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -198,11 +207,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -217,19 +228,20 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
@@ -243,7 +255,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -269,10 +281,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -323,6 +331,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -343,14 +352,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -390,12 +393,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -412,7 +419,7 @@ CONFIG_SCSI_DMA=y
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_BLK_DEV_SD is not set
+CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
@@ -474,12 +481,12 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
@@ -535,18 +542,22 @@ CONFIG_PATA_MPC52xx=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -583,16 +594,19 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -605,22 +619,27 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-# CONFIG_GIANFAR is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -628,7 +647,6 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -657,6 +675,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -691,42 +710,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -735,29 +775,47 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -774,10 +832,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -788,17 +842,25 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -810,12 +872,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -845,6 +908,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -864,6 +928,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -874,14 +939,14 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -902,9 +967,9 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -929,9 +994,12 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -945,17 +1013,37 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -966,14 +1054,19 @@ CONFIG_DEBUG_INFO=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1012,6 +1105,10 @@ CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1042,6 +1139,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_PPC_CLOCK=y
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 8c7ba7c6ba49..3c0d4e561726 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:22 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:11:02 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -102,6 +103,7 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
@@ -110,9 +112,13 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -123,6 +129,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -137,19 +144,16 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
@@ -159,7 +163,10 @@ CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -183,7 +190,6 @@ CONFIG_PPC_BESTCOMM_FEC=y
 # Kernel options
 #
 # CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -197,6 +203,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -211,19 +219,20 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,7 +242,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -254,10 +263,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -308,6 +313,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -328,14 +334,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -445,9 +445,12 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -490,10 +493,10 @@ CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
-# CONFIG_SATA_FSL is not set
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
 CONFIG_PATA_MPC52xx=y
@@ -501,7 +504,6 @@ CONFIG_PATA_MPC52xx=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -531,6 +533,9 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
@@ -542,7 +547,6 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
@@ -568,6 +572,7 @@ CONFIG_FEC_MPC52xx_MDIO=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -596,24 +601,39 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -622,10 +642,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -633,6 +656,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
@@ -675,6 +699,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -683,24 +708,39 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_MPC5200_WDT is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -715,10 +755,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -729,6 +765,7 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -736,7 +773,9 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -767,6 +806,8 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -776,19 +817,25 @@ CONFIG_RTC_DRV_DS1307=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -800,12 +847,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -838,6 +886,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -868,6 +917,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -878,14 +928,14 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -961,9 +1011,9 @@ CONFIG_NLS_ISO8859_1=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -990,9 +1040,12 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1006,16 +1059,37 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1026,14 +1100,19 @@ CONFIG_DEBUG_INFO=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1071,6 +1150,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1101,6 +1184,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 9c0caa488b2e..9d0207783d60 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:13:19 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:13:16 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -104,7 +105,9 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -112,24 +115,30 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,19 +153,16 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
@@ -166,7 +172,10 @@ CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -199,12 +208,14 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 # CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -219,17 +230,19 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -240,7 +253,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -265,10 +278,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -313,6 +322,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -333,14 +343,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -484,12 +488,12 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
@@ -545,18 +549,22 @@ CONFIG_PATA_MPC52xx=m
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -593,10 +601,14 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -606,7 +618,6 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
@@ -644,6 +655,7 @@ CONFIG_FEC_MPC52xx_MDIO=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -675,43 +687,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -720,29 +753,47 @@ CONFIG_SENSORS_EEPROM=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -759,10 +810,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -781,12 +828,17 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_HCD_PPC_SOC is not set
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -799,12 +851,17 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -833,7 +890,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -846,7 +902,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -862,10 +918,14 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=m
@@ -894,6 +954,8 @@ CONFIG_RTC_DRV_PCF8563=m
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -903,19 +965,25 @@ CONFIG_RTC_DRV_PCF8563=m
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -927,12 +995,13 @@ CONFIG_EXT3_FS=m
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=m
 CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -964,6 +1033,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -994,6 +1064,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1004,13 +1075,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1070,9 +1141,9 @@ CONFIG_NLS_ISO8859_1=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1098,7 +1169,17 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1108,6 +1189,7 @@ CONFIG_FRAME_WARN=1024
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 CONFIG_PPC_CLOCK=y
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 7672bfba3566..bc190051e8d5 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:39 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:09:30 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -102,6 +103,7 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
@@ -110,14 +112,19 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -128,6 +135,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,19 +150,16 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
@@ -164,7 +169,10 @@ CONFIG_PPC_MPC5200_BUGFIX=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -188,7 +196,6 @@ CONFIG_PPC_BESTCOMM_FEC=y
 # Kernel options
 #
 # CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -202,6 +209,8 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -216,19 +225,20 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -238,7 +248,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -259,10 +269,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -313,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -333,14 +340,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -451,6 +452,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -495,10 +497,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
-# CONFIG_SATA_FSL is not set
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
 CONFIG_PATA_MPC52xx=y
@@ -507,7 +509,6 @@ CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -537,6 +538,9 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
@@ -548,7 +552,6 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
@@ -583,6 +586,7 @@ CONFIG_FEC_MPC52xx_MDIO=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -611,26 +615,41 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -639,10 +658,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -650,6 +672,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
@@ -692,6 +715,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -705,24 +729,39 @@ CONFIG_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -737,10 +776,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -760,11 +795,16 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_SOC=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -775,12 +815,16 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -809,7 +853,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -822,7 +865,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -838,10 +881,13 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -872,6 +918,8 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -881,19 +929,25 @@ CONFIG_RTC_DRV_DS1307=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -905,12 +959,13 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -943,6 +998,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -973,6 +1029,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -983,14 +1040,14 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1066,9 +1123,9 @@ CONFIG_NLS_ISO8859_1=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1095,9 +1152,12 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1111,17 +1171,37 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1132,14 +1212,19 @@ CONFIG_DEBUG_INFO=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1178,6 +1263,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1208,6 +1297,11 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index e55ff7c47a36..07a674f5344e 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -723,7 +723,7 @@ CONFIG_CICADA_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 # CONFIG_NET_ETHERNET is not set
 CONFIG_NETDEV_1000=y
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 2da13e00a807..07ccaf89f379 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -838,7 +838,7 @@ CONFIG_PHYLIB=y
 #
 # MII PHY device drivers
 #
-CONFIG_MARVELL_PHY=y
+# CONFIG_MARVELL_PHY is not set
 # CONFIG_DAVICOM_PHY is not set
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 740c9f2b7de6..15c5604d0b26 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 18 14:19:54 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:09:07 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -22,14 +22,18 @@ CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -47,7 +51,8 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -66,17 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -88,32 +91,49 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -127,29 +147,34 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 CONFIG_PPC_MPC52xx=y
-CONFIG_PPC_MPC5200=y
-CONFIG_PPC_MPC5200_BUGFIX=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 CONFIG_PPC_EFIKA=y
 CONFIG_PPC_LITE5200=y
+CONFIG_PPC_MPC5200_BUGFIX=y
+# CONFIG_PPC_MPC5200_GPIO is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -163,7 +188,6 @@ CONFIG_RTAS_PROC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_PPC_BESTCOMM=y
 CONFIG_PPC_BESTCOMM_ATA=y
@@ -183,12 +207,18 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -198,26 +228,25 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
-# CONFIG_HIBERNATION is not set
+CONFIG_SUSPEND_FREEZER=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -226,7 +255,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -237,6 +266,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -246,15 +276,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -267,6 +293,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -297,8 +324,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -306,6 +331,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -322,17 +348,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -357,6 +378,8 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -428,6 +451,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -444,14 +468,20 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -516,6 +546,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -528,9 +559,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -540,7 +575,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -570,6 +604,7 @@ CONFIG_PATA_MPC52xx=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -586,25 +621,28 @@ CONFIG_PATA_MPC52xx=y
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
 # CONFIG_PATA_OF_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -620,6 +658,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -634,10 +673,14 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_FEC_MPC52xx=y
 CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -647,6 +690,7 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -662,7 +706,6 @@ CONFIG_FEC_MPC52xx_MDIO=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -672,7 +715,30 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # Input device support
 #
-# CONFIG_INPUT is not set
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
@@ -683,8 +749,14 @@ CONFIG_FEC_MPC52xx_MDIO=y
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -718,16 +790,15 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
@@ -735,52 +806,64 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -788,7 +871,9 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -818,6 +903,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -827,9 +913,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -837,6 +926,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 # CONFIG_MPC5200_WDT is not set
 # CONFIG_WATCHDOG_RTAS is not set
 
@@ -850,23 +940,39 @@ CONFIG_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -874,11 +980,78 @@ CONFIG_DAB=y
 # Graphics support
 #
 # CONFIG_AGP is not set
-# CONFIG_DRM is not set
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_R128 is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
 # CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
 
 #
 # Display device support
@@ -886,15 +1059,64 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
-#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_APPLE is not set
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+# CONFIG_HID_CHICONY is not set
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -903,14 +1125,20 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_SOC=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -923,12 +1151,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -948,7 +1181,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -956,15 +1191,10 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -973,7 +1203,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -989,18 +1219,14 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS is not set
 
 #
 # LED drivers
@@ -1009,17 +1235,15 @@ CONFIG_LEDS_CLASS=y
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1031,21 +1255,19 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1072,6 +1294,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1101,8 +1324,11 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1110,15 +1336,14 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1173,7 +1398,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1181,6 +1405,7 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1191,7 +1416,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1199,6 +1424,7 @@ CONFIG_HAS_DMA=y
 CONFIG_PRINTK_TIME=y
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1206,10 +1432,14 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1220,17 +1450,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1240,47 +1492,98 @@ CONFIG_FORCED_INLINING=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 15eb30c9b3f9..d582014b0a38 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -682,7 +682,7 @@ CONFIG_VITESSE_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 CONFIG_ICPLUS_PHY=y
 # CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index c15c91deb2ab..4256e2c4534b 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:56:44 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 09:54:44 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -500,15 +500,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -632,7 +634,13 @@ CONFIG_NETDEV_10000=y
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=m
 # CONFIG_GAMEPORT is not set
 
 #
@@ -660,7 +668,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -757,6 +766,11 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -776,11 +790,11 @@ CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -792,6 +806,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -816,13 +831,65 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -851,6 +918,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1077,10 +1145,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 55edbd545b61..cfc94cfcf4cb 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:28:58 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:06:19 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -506,15 +506,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -680,7 +682,13 @@ CONFIG_NETDEV_10000=y
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=m
 # CONFIG_GAMEPORT is not set
 
 #
@@ -708,7 +716,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -806,6 +815,11 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -826,11 +840,11 @@ CONFIG_GPIOLIB=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -842,6 +856,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -866,13 +881,65 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1002,6 +1069,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1227,10 +1295,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 8931ba729d2b..bb62ad876de3 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -104,4 +104,6 @@ static inline void kvmppc_set_pid(struct kvm_vcpu *vcpu, u32 new_pid)
 	}
 }
 
+extern void kvmppc_core_destroy_mmu(struct kvm_vcpu *vcpu);
+
 #endif /* __POWERPC_KVM_PPC_H__ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 5a441742ffba..68b752626808 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -280,7 +280,6 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 			     unsigned long pstart, unsigned long prot,
 			     int psize, int ssize);
-extern void set_huge_psize(int psize);
 extern void add_gpage(unsigned long addr, unsigned long page_size,
 			  unsigned long number_of_pages);
 extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index 280a90cc9894..c9c678fb2538 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -55,8 +55,6 @@ struct pt_regs {
 
 #ifdef __powerpc64__
 
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
 #define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
 #define STACK_FRAME_LR_SAVE	2	/* Location of LR in stack frame */
 #define STACK_FRAME_REGS_MARKER	ASM_CONST(0x7265677368657265)
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index 80cac984d85d..10b4ab1008af 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -34,7 +34,13 @@ _GLOBAL(__setup_cpu_440grx)
 	blr
 _GLOBAL(__setup_cpu_460ex)
 _GLOBAL(__setup_cpu_460gt)
-	b	__init_fpu_44x
+	mflr	r4
+	bl	__init_fpu_44x
+	bl	__fixup_440A_mcheck
+	mtlr	r4
+	blr
+
+_GLOBAL(__setup_cpu_440x5)
 _GLOBAL(__setup_cpu_440gx)
 _GLOBAL(__setup_cpu_440spe)
 	b	__fixup_440A_mcheck
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index b1eb834bc0fc..7e8719504f39 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -39,6 +39,7 @@ extern void __setup_cpu_440epx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_440x5(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
@@ -1500,6 +1501,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_user_features	= COMMON_USER_BOOKE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_440x5,
+		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
 	{ /* 460EX */
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 1562daf8839a..3a6eaa876ee1 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -75,6 +75,7 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
 	for_each_sg(sgl, sg, nents, i) {
 		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
 		sg->dma_length = sg->length;
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
 	}
 
 	return nents;
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index e6d52845854f..e0bcf9354286 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -57,12 +57,18 @@ system_call_common:
 	beq-	1f
 	ld	r1,PACAKSAVE(r13)
 1:	std	r10,0(r1)
-	crclr	so
 	std	r11,_NIP(r1)
 	std	r12,_MSR(r1)
 	std	r0,GPR0(r1)
 	std	r10,GPR1(r1)
 	ACCOUNT_CPU_USER_ENTRY(r10, r11)
+	/*
+	 * This "crclr so" clears CR0.SO, which is the error indication on
+	 * return from this system call.  There must be no cmp instruction
+	 * between it and the "mfcr r9" below, otherwise if XER.SO is set,
+	 * CR0.SO will get set, causing all system calls to appear to fail.
+	 */
+	crclr	so
 	std	r2,GPR2(r1)
 	std	r3,GPR3(r1)
 	std	r4,GPR4(r1)
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index bdc8b0e860e5..d108715129e2 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -479,6 +479,8 @@ _GLOBAL(_tlbil_pid)
  * (no broadcast)
  */
 _GLOBAL(_tlbil_va)
+	mfmsr	r10
+	wrteei	0
 	slwi	r4,r4,16
 	mtspr	SPRN_MAS6,r4		/* assume AS=0 for now */
 	tlbsx	0,r3
@@ -490,6 +492,7 @@ _GLOBAL(_tlbil_va)
 	tlbwe
 	msync
 	isync
+	wrtee	r10
 	blr
 #endif /* CONFIG_FSL_BOOKE */
 
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index bc1fb27368af..a11d68976dc8 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -250,8 +250,11 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
 	 * parsing
 	 */
 	dn = pci_device_to_OF_node(pdev);
-	if (dn)
-		return of_irq_map_one(dn, 0, out_irq);
+	if (dn) {
+		rc = of_irq_map_one(dn, 0, out_irq);
+		if (!rc)
+			return rc;
+	}
 
 	/* Ok, we don't, time to have fun. Let's start by building up an
 	 * interrupt spec.  we assume #interrupt-cells is 1, which is standard
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 86a2ffccef25..20885a38237a 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -717,9 +717,11 @@ static void unregister_cpu_online(unsigned int cpu)
 
 	BUG_ON(!c->hotpluggable);
 
+#ifdef CONFIG_PPC64
 	if (!firmware_has_feature(FW_FEATURE_ISERIES) &&
 			cpu_has_feature(CPU_FTR_SMT))
 		sysdev_remove_file(s, &attr_smt_snooze_delay);
+#endif
 
 	/* PMC stuff */
 	switch (cur_cpu_spec->pmc_type) {
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 2e227a412bc2..ad72c6f9811f 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -124,6 +124,14 @@ static void kvmppc_44x_shadow_release(struct kvm_vcpu *vcpu,
 	}
 }
 
+void kvmppc_core_destroy_mmu(struct kvm_vcpu *vcpu)
+{
+	int i;
+
+	for (i = 0; i <= tlb_44x_hwater; i++)
+		kvmppc_44x_shadow_release(vcpu, i);
+}
+
 void kvmppc_tlbe_set_modified(struct kvm_vcpu *vcpu, unsigned int i)
 {
     vcpu->arch.shadow_tlb_mod[i] = 1;
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 90a6fc422b23..fda9baada132 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -238,6 +238,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 
 void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
 {
+	kvmppc_core_destroy_mmu(vcpu);
 }
 
 /* Note: clearing MSR[DE] just means that the debug interrupt will not be
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index cecbbc76f624..29954dc28942 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -93,7 +93,7 @@ void __init MMU_init_hw(void)
 
 unsigned long __init mmu_mapin_ram(void)
 {
-	unsigned long v, s;
+	unsigned long v, s, mapped;
 	phys_addr_t p;
 
 	v = KERNELBASE;
@@ -130,5 +130,17 @@ unsigned long __init mmu_mapin_ram(void)
 		s -= LARGE_PAGE_SIZE_4M;
 	}
 
-	return total_lowmem - s;
+	mapped = total_lowmem - s;
+
+	/* If the size of RAM is not an exact power of two, we may not
+	 * have covered RAM in its entirety with 16 and 4 MiB
+	 * pages. Consequently, restrict the top end of RAM currently
+	 * allocable so that calls to the LMB to allocate PTEs for "tail"
+	 * coverage with normal-sized pages (or other reasons) do not
+	 * attempt to allocate outside the allowed range.
+	 */
+
+	__initial_memory_limit_addr = memstart_addr + mapped;
+
+	return mapped;
 }
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index a117024ab8cd..7bbf4e4ed430 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -677,7 +677,7 @@ repeat:
 	return err;
 }
 
-void set_huge_psize(int psize)
+static void __init set_huge_psize(int psize)
 {
 	/* Check that it is a page size supported by the hardware and
 	 * that it fits within pagetable limits. */
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index eb505ad34a85..a8397bbad3d4 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -865,6 +865,67 @@ static struct notifier_block __cpuinitdata ppc64_numa_nb = {
 	.priority = 1 /* Must run before sched domains notifier. */
 };
 
+static void mark_reserved_regions_for_nid(int nid)
+{
+	struct pglist_data *node = NODE_DATA(nid);
+	int i;
+
+	for (i = 0; i < lmb.reserved.cnt; i++) {
+		unsigned long physbase = lmb.reserved.region[i].base;
+		unsigned long size = lmb.reserved.region[i].size;
+		unsigned long start_pfn = physbase >> PAGE_SHIFT;
+		unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
+		struct node_active_region node_ar;
+		unsigned long node_end_pfn = node->node_start_pfn +
+					     node->node_spanned_pages;
+
+		/*
+		 * Check to make sure that this lmb.reserved area is
+		 * within the bounds of the node that we care about.
+		 * Checking the nid of the start and end points is not
+		 * sufficient because the reserved area could span the
+		 * entire node.
+		 */
+		if (end_pfn <= node->node_start_pfn ||
+		    start_pfn >= node_end_pfn)
+			continue;
+
+		get_node_active_region(start_pfn, &node_ar);
+		while (start_pfn < end_pfn &&
+			node_ar.start_pfn < node_ar.end_pfn) {
+			unsigned long reserve_size = size;
+			/*
+			 * if reserved region extends past active region
+			 * then trim size to active region
+			 */
+			if (end_pfn > node_ar.end_pfn)
+				reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
+					- (start_pfn << PAGE_SHIFT);
+			dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
+				reserve_size, node_ar.nid);
+			reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
+						reserve_size, BOOTMEM_DEFAULT);
+			/*
+			 * if reserved region is contained in the active region
+			 * then done.
+			 */
+			if (end_pfn <= node_ar.end_pfn)
+				break;
+
+			/*
+			 * reserved region extends past the active region
+			 *   get next active region that contains this
+			 *   reserved region
+			 */
+			start_pfn = node_ar.end_pfn;
+			physbase = start_pfn << PAGE_SHIFT;
+			size = size - reserve_size;
+			get_node_active_region(start_pfn, &node_ar);
+		}
+	}
+}
+
+
 void __init do_init_bootmem(void)
 {
 	int nid;
@@ -890,7 +951,13 @@ void __init do_init_bootmem(void)
 
 		get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
 
-		/* Allocate the node structure node local if possible */
+		/*
+		 * Allocate the node structure node local if possible
+		 *
+		 * Be careful moving this around, as it relies on all
+		 * previous nodes' bootmem to be initialized and have
+		 * all reserved areas marked.
+		 */
 		NODE_DATA(nid) = careful_allocation(nid,
 					sizeof(struct pglist_data),
 					SMP_CACHE_BYTES, end_pfn);
@@ -922,53 +989,14 @@ void __init do_init_bootmem(void)
 				  start_pfn, end_pfn);
 
 		free_bootmem_with_active_regions(nid, end_pfn);
-	}
-
-	/* Mark reserved regions */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long physbase = lmb.reserved.region[i].base;
-		unsigned long size = lmb.reserved.region[i].size;
-		unsigned long start_pfn = physbase >> PAGE_SHIFT;
-		unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
-		struct node_active_region node_ar;
-
-		get_node_active_region(start_pfn, &node_ar);
-		while (start_pfn < end_pfn &&
-			node_ar.start_pfn < node_ar.end_pfn) {
-			unsigned long reserve_size = size;
-			/*
-			 * if reserved region extends past active region
-			 * then trim size to active region
-			 */
-			if (end_pfn > node_ar.end_pfn)
-				reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
-					- (start_pfn << PAGE_SHIFT);
-			dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
-				reserve_size, node_ar.nid);
-			reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
-						reserve_size, BOOTMEM_DEFAULT);
-			/*
-			 * if reserved region is contained in the active region
-			 * then done.
-			 */
-			if (end_pfn <= node_ar.end_pfn)
-				break;
-
-			/*
-			 * reserved region extends past the active region
-			 *   get next active region that contains this
-			 *   reserved region
-			 */
-			start_pfn = node_ar.end_pfn;
-			physbase = start_pfn << PAGE_SHIFT;
-			size = size - reserve_size;
-			get_node_active_region(start_pfn, &node_ar);
-		}
-
-	}
-
-	for_each_online_node(nid)
+		/*
+		 * Be very careful about moving this around.  Future
+		 * calls to careful_allocation() depend on this getting
+		 * done correctly.
+		 */
+		mark_reserved_regions_for_nid(nid);
 		sparse_memory_present_with_active_regions(nid);
+	}
 }
 
 void __init paging_init(void)
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index 896548ba1ca1..442cf36aa172 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -95,6 +95,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 	struct axon_msic *msic = get_irq_data(irq);
 	u32 write_offset, msi;
 	int idx;
+	int retry = 0;
 
 	write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG);
 	pr_debug("axon_msi: original write_offset 0x%x\n", write_offset);
@@ -102,7 +103,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 	/* write_offset doesn't wrap properly, so we have to mask it */
 	write_offset &= MSIC_FIFO_SIZE_MASK;
 
-	while (msic->read_offset != write_offset) {
+	while (msic->read_offset != write_offset && retry < 100) {
 		idx  = msic->read_offset / sizeof(__le32);
 		msi  = le32_to_cpu(msic->fifo_virt[idx]);
 		msi &= 0xFFFF;
@@ -110,13 +111,37 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 		pr_debug("axon_msi: woff %x roff %x msi %x\n",
 			  write_offset, msic->read_offset, msi);
 
+		if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
+			generic_handle_irq(msi);
+			msic->fifo_virt[idx] = cpu_to_le32(0xffffffff);
+		} else {
+			/*
+			 * Reading the MSIC_WRITE_OFFSET_REG does not
+			 * reliably flush the outstanding DMA to the
+			 * FIFO buffer. Here we were reading stale
+			 * data, so we need to retry.
+			 */
+			udelay(1);
+			retry++;
+			pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+			continue;
+		}
+
+		if (retry) {
+			pr_debug("axon_msi: late irq 0x%x, retry %d\n",
+				 msi, retry);
+			retry = 0;
+		}
+
 		msic->read_offset += MSIC_FIFO_ENTRY_SIZE;
 		msic->read_offset &= MSIC_FIFO_SIZE_MASK;
+	}
 
-		if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host)
-			generic_handle_irq(msi);
-		else
-			pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+	if (retry) {
+		printk(KERN_WARNING "axon_msi: irq timed out\n");
+
+		msic->read_offset += MSIC_FIFO_ENTRY_SIZE;
+		msic->read_offset &= MSIC_FIFO_SIZE_MASK;
 	}
 
 	desc->chip->eoi(irq);
@@ -364,6 +389,7 @@ static int axon_msi_probe(struct of_device *device,
 		       dn->full_name);
 		goto out_free_fifo;
 	}
+	memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES);
 
 	msic->irq_host = irq_alloc_host(dn, IRQ_HOST_MAP_NOMAP,
 					NR_IRQS, &msic_host_ops, 0);
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index c0d86e1f56ea..9046803c8276 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -129,10 +129,15 @@ static int __init smp_iic_probe(void)
 	return cpus_weight(cpu_possible_map);
 }
 
-static void __devinit smp_iic_setup_cpu(int cpu)
+static void __devinit smp_cell_setup_cpu(int cpu)
 {
 	if (cpu != boot_cpuid)
 		iic_setup_cpu();
+
+	/*
+	 * change default DABRX to allow user watchpoints
+	 */
+	mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
 }
 
 static DEFINE_SPINLOCK(timebase_lock);
@@ -192,7 +197,7 @@ static struct smp_ops_t bpa_iic_smp_ops = {
 	.message_pass	= smp_iic_message_pass,
 	.probe		= smp_iic_probe,
 	.kick_cpu	= smp_cell_kick_cpu,
-	.setup_cpu	= smp_iic_setup_cpu,
+	.setup_cpu	= smp_cell_setup_cpu,
 	.cpu_bootable	= smp_cell_cpu_bootable,
 };
 
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index b73c369cc6f1..1b26071a86ca 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -390,6 +390,9 @@ static int spufs_ps_fault(struct vm_area_struct *vma,
 	if (offset >= ps_size)
 		return VM_FAULT_SIGBUS;
 
+	if (fatal_signal_pending(current))
+		return VM_FAULT_SIGBUS;
+
 	/*
 	 * Because we release the mmap_sem, the context may be destroyed while
 	 * we're in spu_wait. Grab an extra reference so it isn't destroyed
diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/arch/powerpc/sysdev/bestcomm/Kconfig
index 57cc56562567..0b192a1c429d 100644
--- a/arch/powerpc/sysdev/bestcomm/Kconfig
+++ b/arch/powerpc/sysdev/bestcomm/Kconfig
@@ -17,23 +17,20 @@ config PPC_BESTCOMM
 	  answer Y or M. Otherwise say N.
 
 config PPC_BESTCOMM_ATA
-	tristate "Bestcomm ATA task support"
+	tristate
 	depends on PPC_BESTCOMM
-	default n
 	help
 	  This option enables the support for the ATA task.
 
 config PPC_BESTCOMM_FEC
-	tristate "Bestcomm FEC tasks support"
+	tristate
 	depends on PPC_BESTCOMM
-	default n
 	help
 	  This option enables the support for the FEC tasks.
 
 config PPC_BESTCOMM_GEN_BD
-	tristate "Bestcomm GenBD tasks support"
+	tristate
 	depends on PPC_BESTCOMM
-	default n
 	help
 	  This option enables the support for the GenBD tasks.
 
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index f6299cca7814..1890fb085cde 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -600,7 +600,7 @@ static int irq_choose_cpu(unsigned int virt_irq)
 		cpuid = first_cpu(tmp);
 	}
 
-	return cpuid;
+	return get_hard_smp_processor_id(cpuid);
 }
 #else
 static int irq_choose_cpu(unsigned int virt_irq)
@@ -1271,6 +1271,7 @@ void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count)
 void __init mpic_init(struct mpic *mpic)
 {
 	int i;
+	int cpu;
 
 	BUG_ON(mpic->num_sources == 0);
 
@@ -1313,6 +1314,11 @@ void __init mpic_init(struct mpic *mpic)
 
 	mpic_pasemi_msi_init(mpic);
 
+	if (mpic->flags & MPIC_PRIMARY)
+		cpu = hard_smp_processor_id();
+	else
+		cpu = 0;
+
 	for (i = 0; i < mpic->num_sources; i++) {
 		/* start with vector = source number, and masked */
 		u32 vecpri = MPIC_VECPRI_MASK | i |
@@ -1323,8 +1329,7 @@ void __init mpic_init(struct mpic *mpic)
 			continue;
 		/* init hw */
 		mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri);
-		mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
-			       1 << hard_smp_processor_id());
+		mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu);
 	}
 	
 	/* Init spurious vector */
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index b7aefd0d45cb..a22e1a2df1af 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -107,8 +107,8 @@ xilinx_intc_init(struct device_node *np)
 	}
 	regs = ioremap(res.start, 32);
 
-	printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n",
-		res.start, regs);
+	printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n",
+		(unsigned long long) res.start, regs);
 
 	/* Setup interrupt controller */
 	out_be32(regs + XINTC_IER, 0); /* disable all irqs */
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 9b0bc2c9fba0..a0e748da9909 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 19:43:29 2008
+# Linux kernel version: 2.6.28-rc6
+# Thu Nov 27 11:00:49 2008
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -45,6 +45,7 @@ CONFIG_LOG_BUF_SHIFT=17
 CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 CONFIG_CGROUP_NS=y
+# CONFIG_CGROUP_FREEZER is not set
 # CONFIG_CGROUP_DEVICE is not set
 # CONFIG_CPUSETS is not set
 CONFIG_GROUP_SCHED=y
@@ -84,6 +85,7 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -92,16 +94,10 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
 CONFIG_KRETPROBES=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -135,6 +131,7 @@ CONFIG_DEFAULT_DEADLINE=y
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_PREEMPT_NOTIFIERS=y
 CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Base setup
@@ -189,7 +186,6 @@ CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
@@ -200,9 +196,11 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 
 #
 # I/O subsystem configuration
@@ -220,6 +218,8 @@ CONFIG_IPL=y
 CONFIG_IPL_VM=y
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=9
 # CONFIG_PROCESS_DEBUG is not set
@@ -255,7 +255,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_IUCV=m
+CONFIG_IUCV=y
 CONFIG_AFIUCV=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -282,7 +282,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -331,10 +330,12 @@ CONFIG_NF_CONNTRACK=m
 # CONFIG_NF_CONNTRACK_TFTP is not set
 # CONFIG_NF_CT_NETLINK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 # CONFIG_NF_CONNTRACK_IPV4 is not set
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
@@ -374,6 +375,7 @@ CONFIG_NET_SCH_CBQ=m
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=y
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -406,6 +408,7 @@ CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_ACT_NAT=m
 # CONFIG_NET_ACT_PEDIT is not set
 # CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
 # CONFIG_NET_CLS_IND is not set
 CONFIG_NET_SCH_FIFO=y
 
@@ -424,6 +427,7 @@ CONFIG_CAN_BCM=m
 CONFIG_CAN_VCAN=m
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 # CONFIG_PCMCIA is not set
@@ -473,7 +477,7 @@ CONFIG_VIRTIO_BLK=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
 
 #
 # SCSI device support
@@ -525,6 +529,7 @@ CONFIG_SCSI_DH_EMC=m
 CONFIG_SCSI_DH_ALUA=m
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
@@ -555,6 +560,9 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 # CONFIG_TR is not set
@@ -632,13 +640,12 @@ CONFIG_S390_VMUR=m
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
+# CONFIG_REGULATOR is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_ACCESSIBILITY=y
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -650,13 +657,14 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
@@ -688,6 +696,7 @@ CONFIG_GENERIC_ACL=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
@@ -728,6 +737,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -800,12 +810,24 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 CONFIG_SAMPLES=y
 # CONFIG_SAMPLE_KOBJECT is not set
 # CONFIG_SAMPLE_KPROBES is not set
@@ -816,16 +838,19 @@ CONFIG_SAMPLES=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
 # CONFIG_CRYPTO_NULL is not set
@@ -877,7 +902,7 @@ CONFIG_CRYPTO_SHA1=m
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -898,6 +923,11 @@ CONFIG_CRYPTO_SEED=m
 #
 # CONFIG_CRYPTO_DEFLATE is not set
 CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_HW=y
 CONFIG_ZCRYPT=m
 # CONFIG_ZCRYPT_MONOLITHIC is not set
@@ -912,8 +942,6 @@ CONFIG_S390_PRNG=m
 # Library routines
 #
 CONFIG_BITREVERSE=m
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 7fc76133b3e4..5caddd4f7bed 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -679,8 +679,6 @@ static inline void pmd_clear(pmd_t *pmd)
 
 static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
-	if (mm->context.has_pgste)
-		ptep_rcp_copy(ptep);
 	pte_val(*ptep) = _PAGE_TYPE_EMPTY;
 	if (mm->context.noexec)
 		pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY;
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index a7226f8143fb..5396f9f12263 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -321,8 +321,8 @@ struct pt_regs
 	psw_t psw;
 	unsigned long gprs[NUM_GPRS];
 	unsigned long orig_gpr2;
+	unsigned short svcnr;
 	unsigned short ilc;
-	unsigned short trap;
 };
 #endif
 
@@ -486,8 +486,6 @@ struct task_struct;
 extern void user_enable_single_step(struct task_struct *);
 extern void user_disable_single_step(struct task_struct *);
 
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
 #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
 #define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
 #define user_stack_pointer(regs)((regs)->gprs[15])
diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h
index 6e623971fbb9..2429b87eb28d 100644
--- a/arch/s390/include/asm/syscall.h
+++ b/arch/s390/include/asm/syscall.h
@@ -17,9 +17,7 @@
 static inline long syscall_get_nr(struct task_struct *task,
 				  struct pt_regs *regs)
 {
-	if (regs->trap != __LC_SVC_OLD_PSW)
-		return -1;
-	return regs->gprs[2];
+	return regs->svcnr ? regs->svcnr : -1;
 }
 
 static inline void syscall_rollback(struct task_struct *task,
@@ -52,18 +50,20 @@ static inline void syscall_get_arguments(struct task_struct *task,
 					 unsigned int i, unsigned int n,
 					 unsigned long *args)
 {
+	unsigned long mask = -1UL;
+
 	BUG_ON(i + n > 6);
 #ifdef CONFIG_COMPAT
-	if (test_tsk_thread_flag(task, TIF_31BIT)) {
-		if (i + n == 6)
-			args[--n] = (u32) regs->args[0];
-		while (n-- > 0)
-			args[n] = (u32) regs->gprs[2 + i + n];
-	}
+	if (test_tsk_thread_flag(task, TIF_31BIT))
+		mask = 0xffffffff;
 #endif
 	if (i + n == 6)
-		args[--n] = regs->args[0];
-	memcpy(args, &regs->gprs[2 + i], n * sizeof(args[0]));
+		args[--n] = regs->args[0] & mask;
+	while (n-- > 0)
+		if (i + n > 0)
+			args[n] = regs->gprs[2 + i + n] & mask;
+	if (i == 0)
+		args[0] = regs->orig_gpr2 & mask;
 }
 
 static inline void syscall_set_arguments(struct task_struct *task,
@@ -74,7 +74,11 @@ static inline void syscall_set_arguments(struct task_struct *task,
 	BUG_ON(i + n > 6);
 	if (i + n == 6)
 		regs->args[0] = args[--n];
-	memcpy(&regs->gprs[2 + i], args, n * sizeof(args[0]));
+	while (n-- > 0)
+		if (i + n > 0)
+			regs->gprs[2 + i + n] = args[n];
+	if (i == 0)
+		regs->orig_gpr2 = args[0];
 }
 
 #endif	/* _ASM_SYSCALL_H */
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index fa28ecae636b..3d144e6020c6 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -32,7 +32,7 @@ int main(void)
 	DEFINE(__PT_GPRS, offsetof(struct pt_regs, gprs));
 	DEFINE(__PT_ORIG_GPR2, offsetof(struct pt_regs, orig_gpr2));
 	DEFINE(__PT_ILC, offsetof(struct pt_regs, ilc));
-	DEFINE(__PT_TRAP, offsetof(struct pt_regs, trap));
+	DEFINE(__PT_SVCNR, offsetof(struct pt_regs, svcnr));
 	DEFINE(__PT_SIZE, sizeof(struct pt_regs));
 	BLANK();
 	DEFINE(__SF_BACKCHAIN, offsetof(struct stack_frame, back_chain));
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index c7f02e777af2..b537cb0e9b55 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -340,7 +340,7 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
 		return err;
 
 	restore_fp_regs(&current->thread.fp_regs);
-	regs->trap = -1;	/* disable syscall checks */
+	regs->svcnr = 0;	/* disable syscall checks */
 	return 0;
 }
 
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 08844fc24a2e..198ea18a534d 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -46,7 +46,7 @@ SP_R14	     =	STACK_FRAME_OVERHEAD + __PT_GPRS + 56
 SP_R15	     =	STACK_FRAME_OVERHEAD + __PT_GPRS + 60
 SP_ORIG_R2   =	STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
 SP_ILC	     =	STACK_FRAME_OVERHEAD + __PT_ILC
-SP_TRAP      =	STACK_FRAME_OVERHEAD + __PT_TRAP
+SP_SVCNR     =	STACK_FRAME_OVERHEAD + __PT_SVCNR
 SP_SIZE      =	STACK_FRAME_OVERHEAD + __PT_SIZE
 
 _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
@@ -183,11 +183,10 @@ STACK_SIZE  = 1 << STACK_SHIFT
 	.macro	CREATE_STACK_FRAME psworg,savearea
 	s	%r15,BASED(.Lc_spsize)	# make room for registers & psw
 	mvc	SP_PSW(8,%r15),0(%r12)	# move user PSW to stack
-	la	%r12,\psworg
 	st	%r2,SP_ORIG_R2(%r15)	# store original content of gpr 2
-	icm	%r12,12,__LC_SVC_ILC
+	icm	%r12,3,__LC_SVC_ILC
 	stm	%r0,%r11,SP_R0(%r15)	# store gprs %r0-%r11 to kernel stack
-	st	%r12,SP_ILC(%r15)
+	st	%r12,SP_SVCNR(%r15)
 	mvc	SP_R12(16,%r15),\savearea # move %r12-%r15 to stack
 	la	%r12,0
 	st	%r12,__SF_BACKCHAIN(%r15)	# clear back chain
@@ -264,16 +263,17 @@ sysc_update:
 #endif
 sysc_do_svc:
 	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
-	sla	%r7,2			# *4 and test for svc 0
+	ltr	%r7,%r7			# test for svc 0
 	bnz	BASED(sysc_nr_ok)	# svc number > 0
 	# svc 0: system call number in %r1
 	cl	%r1,BASED(.Lnr_syscalls)
 	bnl	BASED(sysc_nr_ok)
 	lr	%r7,%r1 	  # copy svc number to %r7
-	sla	%r7,2		  # *4
 sysc_nr_ok:
 	mvc	SP_ARGS(4,%r15),SP_R7(%r15)
 sysc_do_restart:
+	sth	%r7,SP_SVCNR(%r15)
+	sll	%r7,2		  # svc number *4
 	l	%r8,BASED(.Lsysc_table)
 	tm	__TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
 	l	%r8,0(%r7,%r8)	  # get system call addr.
@@ -376,7 +376,6 @@ sysc_notify_resume:
 sysc_restart:
 	ni	__TI_flags+3(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
 	l	%r7,SP_R2(%r15) 	# load new svc number
-	sla	%r7,2
 	mvc	SP_R2(4,%r15),SP_ORIG_R2(%r15) # restore first argument
 	lm	%r2,%r6,SP_R2(%r15)	# load svc arguments
 	b	BASED(sysc_do_restart)	# restart svc
@@ -386,7 +385,8 @@ sysc_restart:
 #
 sysc_singlestep:
 	ni	__TI_flags+3(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
-	mvi	SP_TRAP+1(%r15),0x28	# set trap indication to pgm check
+	mvi	SP_SVCNR(%r15),0xff	# set trap indication to pgm check
+	mvi	SP_SVCNR+1(%r15),0xff
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	l	%r1,BASED(.Lhandle_per)	# load adr. of per handler
 	la	%r14,BASED(sysc_return)	# load adr. of system return
@@ -407,7 +407,7 @@ sysc_tracesys:
 	bnl	BASED(sysc_tracenogo)
 	l	%r8,BASED(.Lsysc_table)
 	lr	%r7,%r2
-	sll	%r7,2			# *4
+	sll	%r7,2			# svc number *4
 	l	%r8,0(%r7,%r8)
 sysc_tracego:
 	lm	%r3,%r6,SP_R3(%r15)
@@ -586,7 +586,8 @@ pgm_svcper:
 # per was called from kernel, must be kprobes
 #
 kernel_per:
-	mvi	SP_TRAP+1(%r15),0x28	# set trap indication to pgm check
+	mvi	SP_SVCNR(%r15),0xff	# set trap indication to pgm check
+	mvi	SP_SVCNR+1(%r15),0xff
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	l	%r1,BASED(.Lhandle_per)	# load adr. of per handler
 	la	%r14,BASED(sysc_restore)# load adr. of system return
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 41aca06682aa..89c121ae6339 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -46,7 +46,7 @@ SP_R14	     =	STACK_FRAME_OVERHEAD + __PT_GPRS + 112
 SP_R15	     =	STACK_FRAME_OVERHEAD + __PT_GPRS + 120
 SP_ORIG_R2   =	STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
 SP_ILC	     =	STACK_FRAME_OVERHEAD + __PT_ILC
-SP_TRAP      =	STACK_FRAME_OVERHEAD + __PT_TRAP
+SP_SVCNR      =	STACK_FRAME_OVERHEAD + __PT_SVCNR
 SP_SIZE      =	STACK_FRAME_OVERHEAD + __PT_SIZE
 
 STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
@@ -171,11 +171,10 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 	.macro	CREATE_STACK_FRAME psworg,savearea
 	aghi	%r15,-SP_SIZE		# make room for registers & psw
 	mvc	SP_PSW(16,%r15),0(%r12)	# move user PSW to stack
-	la	%r12,\psworg
 	stg	%r2,SP_ORIG_R2(%r15)	# store original content of gpr 2
-	icm	%r12,12,__LC_SVC_ILC
+	icm	%r12,3,__LC_SVC_ILC
 	stmg	%r0,%r11,SP_R0(%r15)	# store gprs %r0-%r11 to kernel stack
-	st	%r12,SP_ILC(%r15)
+	st	%r12,SP_SVCNR(%r15)
 	mvc	SP_R12(32,%r15),\savearea # move %r12-%r15 to stack
 	la	%r12,0
 	stg	%r12,__SF_BACKCHAIN(%r15)
@@ -250,16 +249,17 @@ sysc_update:
 #endif
 sysc_do_svc:
 	lg	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
-	slag	%r7,%r7,2	# *4 and test for svc 0
+	ltgr	%r7,%r7		# test for svc 0
 	jnz	sysc_nr_ok
 	# svc 0: system call number in %r1
 	cl	%r1,BASED(.Lnr_syscalls)
 	jnl	sysc_nr_ok
 	lgfr	%r7,%r1 	# clear high word in r1
-	slag	%r7,%r7,2	# svc 0: system call number in %r1
 sysc_nr_ok:
 	mvc	SP_ARGS(8,%r15),SP_R7(%r15)
 sysc_do_restart:
+	sth	%r7,SP_SVCNR(%r15)
+	sllg	%r7,%r7,2	# svc number * 4
 	larl	%r10,sys_call_table
 #ifdef CONFIG_COMPAT
 	tm	__TI_flags+5(%r9),(_TIF_31BIT>>16)  # running in 31 bit mode ?
@@ -363,7 +363,6 @@ sysc_notify_resume:
 sysc_restart:
 	ni	__TI_flags+7(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
 	lg	%r7,SP_R2(%r15)		# load new svc number
-	slag	%r7,%r7,2		# *4
 	mvc	SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument
 	lmg	%r2,%r6,SP_R2(%r15)	# load svc arguments
 	j	sysc_do_restart 	# restart svc
@@ -372,9 +371,8 @@ sysc_restart:
 # _TIF_SINGLE_STEP is set, call do_single_step
 #
 sysc_singlestep:
-	ni	__TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
-	lhi	%r0,__LC_PGM_OLD_PSW
-	sth	%r0,SP_TRAP(%r15)	# set trap indication to pgm check
+	ni	__TI_flags+7(%r9),255-_TIF_SINGLE_STEP	# clear TIF_SINGLE_STEP
+	xc	SP_SVCNR(2,%r15),SP_SVCNR(%r15)		# clear svc number
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	larl	%r14,sysc_return	# load adr. of system return
 	jg	do_single_step		# branch to do_sigtrap
@@ -392,7 +390,7 @@ sysc_tracesys:
 	lghi	%r0,NR_syscalls
 	clgr	%r0,%r2
 	jnh	sysc_tracenogo
-	slag	%r7,%r2,2		# *4
+	sllg	%r7,%r2,2		# svc number *4
 	lgf	%r8,0(%r7,%r10)
 sysc_tracego:
 	lmg	%r3,%r6,SP_R3(%r15)
@@ -567,8 +565,7 @@ pgm_svcper:
 # per was called from kernel, must be kprobes
 #
 kernel_per:
-	lhi	%r0,__LC_PGM_OLD_PSW
-	sth	%r0,SP_TRAP(%r15)	# set trap indication to pgm check
+	xc	SP_SVCNR(2,%r15),SP_SVCNR(%r15)	# clear svc number
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	larl	%r14,sysc_restore	# load adr. of system ret, no work
 	jg	do_single_step		# branch to do_single_step
diff --git a/arch/s390/kernel/init_task.c b/arch/s390/kernel/init_task.c
index 7ad003969251..e80716843619 100644
--- a/arch/s390/kernel/init_task.c
+++ b/arch/s390/kernel/init_task.c
@@ -26,7 +26,7 @@ EXPORT_SYMBOL(init_mm);
 /*
  * Initial thread structure.
  *
- * We need to make sure that this is 8192-byte aligned due to the
+ * We need to make sure that this is THREAD_SIZE aligned due to the
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 1f31be1ecc4b..38ff2bce1203 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -657,7 +657,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 		 * debugger stored an invalid system call number. Skip
 		 * the system call and the system call restart handling.
 		 */
-		regs->trap = -1;
+		regs->svcnr = 0;
 		ret = -1;
 	}
 
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 4f7fc3059a8e..8e6812a22670 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -160,7 +160,7 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
 	current->thread.fp_regs.fpc &= FPC_VALID_MASK;
 
 	restore_fp_regs(&current->thread.fp_regs);
-	regs->trap = -1;	/* disable syscall checks */
+	regs->svcnr = 0;	/* disable syscall checks */
 	return 0;
 }
 
@@ -445,7 +445,7 @@ void do_signal(struct pt_regs *regs)
 		oldset = &current->blocked;
 
 	/* Are we from a system call? */
-	if (regs->trap == __LC_SVC_OLD_PSW) {
+	if (regs->svcnr) {
 		continue_addr = regs->psw.addr;
 		restart_addr = continue_addr - regs->ilc;
 		retval = regs->gprs[2];
@@ -462,7 +462,7 @@ void do_signal(struct pt_regs *regs)
 		case -ERESTART_RESTARTBLOCK:
 			regs->gprs[2] = -EINTR;
 		}
-		regs->trap = -1;	/* Don't deal with this again. */
+		regs->svcnr = 0;	/* Don't deal with this again. */
 	}
 
 	/* Get signal to deliver.  When running under ptrace, at this point
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index b94e9e3b694a..eccefbbff887 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -59,7 +59,7 @@
 
 static ext_int_info_t ext_int_info_cc;
 static ext_int_info_t ext_int_etr_cc;
-static u64 jiffies_timer_cc;
+static u64 sched_clock_base_cc;
 
 static DEFINE_PER_CPU(struct clock_event_device, comparators);
 
@@ -68,7 +68,7 @@ static DEFINE_PER_CPU(struct clock_event_device, comparators);
  */
 unsigned long long sched_clock(void)
 {
-	return ((get_clock_xt() - jiffies_timer_cc) * 125) >> 9;
+	return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9;
 }
 
 /*
@@ -229,13 +229,10 @@ static struct clocksource clocksource_tod = {
  */
 void __init time_init(void)
 {
-	u64 init_timer_cc;
-
-	init_timer_cc = reset_tod_clock();
-	jiffies_timer_cc = init_timer_cc - jiffies_64 * CLK_TICKS_PER_JIFFY;
+	sched_clock_base_cc = reset_tod_clock();
 
 	/* set xtime */
-	tod_to_timeval(init_timer_cc - TOD_UNIX_EPOCH, &xtime);
+	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
         set_normalized_timespec(&wall_to_monotonic,
                                 -xtime.tv_sec, -xtime.tv_nsec);
 
@@ -289,7 +286,7 @@ static unsigned long long adjust_time(unsigned long long old,
 		delta = -delta;
 		adjust.offset = -ticks * (1000000 / HZ);
 	}
-	jiffies_timer_cc += delta;
+	sched_clock_base_cc += delta;
 	if (adjust.offset != 0) {
 		printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n",
 		       adjust.offset);
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 607bd67a18ce..d796d05c9c01 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -2,6 +2,7 @@
  * Written by Martin Schwidefsky (schwidefsky@de.ibm.com)
  */
 
+#include <asm/thread_info.h>
 #include <asm/page.h>
 #include <asm-generic/vmlinux.lds.h>
 
@@ -86,7 +87,7 @@ SECTIONS
 	}
 	_edata = .;		/* End of data section */
 
-	. = ALIGN(2 * PAGE_SIZE);	/* init_task */
+	. = ALIGN(THREAD_SIZE);	/* init_task */
 	.data.init_task : {
 		*(.data.init_task)
 	}
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 170392687ce0..2a01b9e02801 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -237,6 +237,11 @@ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu)
 	u8 order_code;
 	int rc;
 
+	/* sigp in userspace can exit */
+	if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
+		return kvm_s390_inject_program_int(vcpu,
+						   PGM_PRIVILEGED_OPERATION);
+
 	order_code = disp2;
 	if (base2)
 		order_code += vcpu->arch.guest_gprs[base2];
diff --git a/arch/sparc/include/asm/bitops_32.h b/arch/sparc/include/asm/bitops_32.h
index 68b98a7e6454..9cf4ae0cd7ba 100644
--- a/arch/sparc/include/asm/bitops_32.h
+++ b/arch/sparc/include/asm/bitops_32.h
@@ -98,6 +98,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 #include <asm-generic/bitops/sched.h>
 #include <asm-generic/bitops/ffs.h>
 #include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
 #include <asm-generic/bitops/fls64.h>
 #include <asm-generic/bitops/hweight.h>
 #include <asm-generic/bitops/lock.h>
diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h
index 3d3e9c161d8b..84e969f06afe 100644
--- a/arch/sparc/include/asm/ptrace_64.h
+++ b/arch/sparc/include/asm/ptrace_64.h
@@ -142,8 +142,6 @@ struct global_reg_snapshot {
 };
 extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
 
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
 #define force_successful_syscall_return()	    \
 do {	current_thread_info()->syscall_noerror = 1; \
 } while (0)
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index e7a0edfc1a32..1fc17f59c6bf 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -126,7 +126,7 @@ char *sparc_fpu_type;
 
 unsigned int fsr_storage;
 
-void __init cpu_probe(void)
+void __cpuinit cpu_probe(void)
 {
 	int psr_impl, psr_vers, fpu_vers;
 	int i, psr;
diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S
index 2d325fd84579..51b40426f9c6 100644
--- a/arch/sparc/kernel/head.S
+++ b/arch/sparc/kernel/head.S
@@ -72,7 +72,7 @@ sun4e_notsup:
 	.align 4
 
 	/* The Sparc trap table, bootloader gives us control at _start. */
-	.text
+	.section .text.head,"ax"
 	.globl	start, _stext, _start, __stext
 	.globl  trapbase
 _start:   /* danger danger */
diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c
index 1619ec15c099..e396c1f17a92 100644
--- a/arch/sparc/kernel/smp.c
+++ b/arch/sparc/kernel/smp.c
@@ -35,7 +35,7 @@
 
 #include "irq.h"
 
-volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
+volatile unsigned long cpu_callin_map[NR_CPUS] __cpuinitdata = {0,};
 unsigned char boot_cpu_id = 0;
 unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */
 
@@ -120,7 +120,7 @@ void cpu_panic(void)
 	panic("SMP bolixed\n");
 }
 
-struct linux_prom_registers smp_penguin_ctable __initdata = { 0 };
+struct linux_prom_registers smp_penguin_ctable __cpuinitdata = { 0 };
 
 void smp_send_reschedule(int cpu)
 {
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index 7a6a5e795928..16ab0cb731c5 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -83,7 +83,7 @@ static inline void show_leds(int cpuid)
 			      "i" (ASI_M_CTL));
 }
 
-void __init smp4d_callin(void)
+void __cpuinit smp4d_callin(void)
 {
 	int cpuid = hard_smp4d_processor_id();
 	extern spinlock_t sun4d_imsk_lock;
@@ -386,7 +386,7 @@ void smp4d_percpu_timer_interrupt(struct pt_regs *regs)
 
 extern unsigned int lvl14_resolution;
 
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
 {
 	int cpu = hard_smp4d_processor_id();
 
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index 5fc386d08c47..4f8d60586b07 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -343,7 +343,7 @@ void smp4m_percpu_timer_interrupt(struct pt_regs *regs)
 
 extern unsigned int lvl14_resolution;
 
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
 {
 	int cpu = smp_processor_id();
 
diff --git a/arch/sparc/kernel/trampoline.S b/arch/sparc/kernel/trampoline.S
index 356c56aebc62..5e235c52d667 100644
--- a/arch/sparc/kernel/trampoline.S
+++ b/arch/sparc/kernel/trampoline.S
@@ -18,7 +18,7 @@
 	.globl sun4m_cpu_startup, __smp4m_processor_id
 	.globl sun4d_cpu_startup, __smp4d_processor_id
 
-	__INIT
+	__CPUINIT
 	.align 4
 
 /* When we start up a cpu for the first time it enters this routine.
@@ -109,7 +109,7 @@ __smp4d_processor_id:
 /* CPUID in bootbus can be found at PA 0xff0140000 */
 #define SUN4D_BOOTBUS_CPUID	0xf0140000
 
-	__INIT
+	__CPUINIT
 	.align	4
 
 sun4d_cpu_startup:
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index b1002c607196..5b7e69a8c32f 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -13,6 +13,7 @@ SECTIONS
 	.text 0xf0004000 :
 	{
 		_text = .;
+		*(.text.head)
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 6a5d7cabc044..dd8aa36f366c 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -1251,7 +1251,7 @@ static inline void map_kernel(void)
 /* Paging initialization on the Sparc Reference MMU. */
 extern void sparc_context_init(int);
 
-void (*poke_srmmu)(void) __initdata = NULL;
+void (*poke_srmmu)(void) __cpuinitdata = NULL;
 
 extern unsigned long bootmem_init(unsigned long *pages_avail);
 
@@ -1446,7 +1446,7 @@ static void __init init_vac_layout(void)
 	       (int)vac_cache_size, (int)vac_line_size);
 }
 
-static void __init poke_hypersparc(void)
+static void __cpuinit poke_hypersparc(void)
 {
 	volatile unsigned long clear;
 	unsigned long mreg = srmmu_get_mmureg();
@@ -1501,7 +1501,7 @@ static void __init init_hypersparc(void)
 	hypersparc_setup_blockops();
 }
 
-static void __init poke_cypress(void)
+static void __cpuinit poke_cypress(void)
 {
 	unsigned long mreg = srmmu_get_mmureg();
 	unsigned long faddr, tagval;
@@ -1589,7 +1589,7 @@ static void __init init_cypress_605(unsigned long mrev)
 	init_cypress_common();
 }
 
-static void __init poke_swift(void)
+static void __cpuinit poke_swift(void)
 {
 	unsigned long mreg;
 
@@ -1771,7 +1771,7 @@ static void turbosparc_flush_tlb_page(struct vm_area_struct *vma, unsigned long
 }
 
 
-static void __init poke_turbosparc(void)
+static void __cpuinit poke_turbosparc(void)
 {
 	unsigned long mreg = srmmu_get_mmureg();
 	unsigned long ccreg;
@@ -1834,7 +1834,7 @@ static void __init init_turbosparc(void)
 	poke_srmmu = poke_turbosparc;
 }
 
-static void __init poke_tsunami(void)
+static void __cpuinit poke_tsunami(void)
 {
 	unsigned long mreg = srmmu_get_mmureg();
 
@@ -1876,7 +1876,7 @@ static void __init init_tsunami(void)
 	tsunami_setup_blockops();
 }
 
-static void __init poke_viking(void)
+static void __cpuinit poke_viking(void)
 {
 	unsigned long mreg = srmmu_get_mmureg();
 	static int smp_catch;
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index f43adbc773ca..a941c610e7ce 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -1014,7 +1014,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 
 	case PTRACE_SETFPREGS64:
-		ret = copy_regset_to_user(child, view, REGSET_FP,
+		ret = copy_regset_from_user(child, view, REGSET_FP,
 					  0 * sizeof(u64),
 					  33 * sizeof(u64),
 					  fps);
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index e5627118e613..f500b0618bb0 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -282,7 +282,7 @@ static unsigned long kimage_addr_to_ra(void *p)
 	return kern_base + (val - KERNBASE);
 }
 
-static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
+static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
 {
 	extern unsigned long sparc64_ttable_tl0;
 	extern unsigned long kern_locked_tte_data;
@@ -343,7 +343,7 @@ extern unsigned long sparc64_cpu_startup;
  */
 static struct thread_info *cpu_new_thread = NULL;
 
-static int __devinit smp_boot_one_cpu(unsigned int cpu)
+static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
 {
 	struct trap_per_cpu *tb = &trap_block[cpu];
 	unsigned long entry =
diff --git a/arch/sparc64/kernel/visemul.c b/arch/sparc64/kernel/visemul.c
index 9e05cb5cb855..b956fd71c131 100644
--- a/arch/sparc64/kernel/visemul.c
+++ b/arch/sparc64/kernel/visemul.c
@@ -131,7 +131,7 @@
 #define VIS_OPF_SHIFT	5
 #define VIS_OPF_MASK	(0x1ff << VIS_OPF_SHIFT)
 
-#define RS1(INSN)	(((INSN) >> 24) & 0x1f)
+#define RS1(INSN)	(((INSN) >> 14) & 0x1f)
 #define RS2(INSN)	(((INSN) >>  0) & 0x1f)
 #define RD(INSN)	(((INSN) >> 25) & 0x1f)
 
@@ -445,7 +445,7 @@ static void pdist(struct pt_regs *regs, unsigned int insn)
 	unsigned long i;
 
 	rs1 = fpd_regval(f, RS1(insn));
-	rs2 = fpd_regval(f, RS1(insn));
+	rs2 = fpd_regval(f, RS2(insn));
 	rd = fpd_regaddr(f, RD(insn));
 
 	rd_val = *rd;
@@ -807,6 +807,8 @@ int vis_emul(struct pt_regs *regs, unsigned int insn)
 	if (get_user(insn, (u32 __user *) pc))
 		return -EFAULT;
 
+	save_and_clear_fpu();
+
 	opf = (insn & VIS_OPF_MASK) >> VIS_OPF_SHIFT;
 	switch (opf) {
 	default:
diff --git a/arch/sparc64/lib/user_fixup.c b/arch/sparc64/lib/user_fixup.c
index 19d1fdb17d0e..05a361b0a1a4 100644
--- a/arch/sparc64/lib/user_fixup.c
+++ b/arch/sparc64/lib/user_fixup.c
@@ -24,7 +24,7 @@ static unsigned long compute_size(unsigned long start, unsigned long size, unsig
 	if (fault_addr < start || fault_addr >= end) {
 		*offset = 0;
 	} else {
-		*offset = start - fault_addr;
+		*offset = fault_addr - start;
 		size = end - fault_addr;
 	}
 	return size;
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 3c10daf8fc01..185f34679110 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -956,7 +956,7 @@ int of_node_to_nid(struct device_node *dp)
 	return nid;
 }
 
-static void add_node_ranges(void)
+static void __init add_node_ranges(void)
 {
 	int i;
 
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 19d579d74d27..8f44ebb0dec8 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -16,6 +16,8 @@
 #include <linux/slab.h>
 #include <linux/syscalls.h>
 #include <linux/utsname.h>
+#include <linux/socket.h>
+#include <linux/un.h>
 #include <linux/workqueue.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
@@ -785,7 +787,7 @@ static int __init mconsole_init(void)
 	/* long to avoid size mismatch warnings from gcc */
 	long sock;
 	int err;
-	char file[256];
+	char file[UNIX_PATH_MAX];
 
 	if (umid_file_name("mconsole", file, sizeof(file)))
 		return -1;
diff --git a/arch/x86/boot/tty.c b/arch/x86/boot/tty.c
index 0be77b39328a..7e8e8b25f5f6 100644
--- a/arch/x86/boot/tty.c
+++ b/arch/x86/boot/tty.c
@@ -74,7 +74,7 @@ static int kbd_pending(void)
 {
 	u8 pending;
 	asm volatile("int $0x16; setnz %0"
-		     : "=rm" (pending)
+		     : "=qm" (pending)
 		     : "a" (0x0100));
 	return pending;
 }
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 1a30c0440c6b..ac302a2fa339 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -251,13 +251,6 @@ struct amd_iommu {
 	/* Pointer to PCI device of this IOMMU */
 	struct pci_dev *dev;
 
-	/*
-	 * Capability pointer. There could be more than one IOMMU per PCI
-	 * device function if there are more than one AMD IOMMU capability
-	 * pointers.
-	 */
-	u16 cap_ptr;
-
 	/* physical address of MMIO space */
 	u64 mmio_phys;
 	/* virtual address of MMIO space */
@@ -266,6 +259,13 @@ struct amd_iommu {
 	/* capabilities of that IOMMU read from ACPI */
 	u32 cap;
 
+	/*
+	 * Capability pointer. There could be more than one IOMMU per PCI
+	 * device function if there are more than one AMD IOMMU capability
+	 * pointers.
+	 */
+	u16 cap_ptr;
+
 	/* pci domain of this IOMMU */
 	u16 pci_seg;
 
@@ -284,19 +284,19 @@ struct amd_iommu {
 	/* size of command buffer */
 	u32 cmd_buf_size;
 
-	/* event buffer virtual address */
-	u8 *evt_buf;
 	/* size of event buffer */
 	u32 evt_buf_size;
+	/* event buffer virtual address */
+	u8 *evt_buf;
 	/* MSI number for event interrupt */
 	u16 evt_msi_num;
 
-	/* if one, we need to send a completion wait command */
-	int need_sync;
-
 	/* true if interrupts for this IOMMU are already enabled */
 	bool int_enabled;
 
+	/* if one, we need to send a completion wait command */
+	int need_sync;
+
 	/* default dma_ops domain for that IOMMU */
 	struct dma_ops_domain *default_dom;
 };
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index 7f225a4b2a26..097794ff6b79 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -71,15 +71,13 @@ static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
 /* Make sure we keep the same behaviour */
 static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-#ifdef CONFIG_X86_32
-	return 0;
-#else
+#ifdef CONFIG_X86_64
 	struct dma_mapping_ops *ops = get_dma_ops(dev);
 	if (ops->mapping_error)
 		return ops->mapping_error(dev, dma_addr);
 
-	return (dma_addr == bad_dma_address);
 #endif
+	return (dma_addr == bad_dma_address);
 }
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
diff --git a/arch/x86/include/asm/ds.h b/arch/x86/include/asm/ds.h
index 72c5a190bf48..a95008457ea4 100644
--- a/arch/x86/include/asm/ds.h
+++ b/arch/x86/include/asm/ds.h
@@ -23,12 +23,13 @@
 #ifndef _ASM_X86_DS_H
 #define _ASM_X86_DS_H
 
-#ifdef CONFIG_X86_DS
 
 #include <linux/types.h>
 #include <linux/init.h>
 
 
+#ifdef CONFIG_X86_DS
+
 struct task_struct;
 
 /*
@@ -232,7 +233,8 @@ extern void ds_free(struct ds_context *context);
 
 #else /* CONFIG_X86_DS */
 
-#define ds_init_intel(config) do {} while (0)
+struct cpuinfo_x86;
+static inline void __cpuinit ds_init_intel(struct cpuinfo_x86 *ignored) {}
 
 #endif /* CONFIG_X86_DS */
 #endif /* _ASM_X86_DS_H */
diff --git a/arch/x86/include/asm/pci_64.h b/arch/x86/include/asm/pci_64.h
index 5b28995d664e..d02d936840a3 100644
--- a/arch/x86/include/asm/pci_64.h
+++ b/arch/x86/include/asm/pci_64.h
@@ -34,8 +34,6 @@ extern void pci_iommu_alloc(void);
  */
 #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
 
-#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
-
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
 	dma_addr_t ADDR_NAME;
 #define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
@@ -49,18 +47,6 @@ extern void pci_iommu_alloc(void);
 #define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
 	(((PTR)->LEN_NAME) = (VAL))
 
-#else
-/* No IOMMU */
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
-#endif
-
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_X86_PCI_64_H */
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index d1531c8480b7..eefb0594b058 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -271,8 +271,6 @@ extern int do_get_thread_area(struct task_struct *p, int idx,
 extern int do_set_thread_area(struct task_struct *p, int idx,
 			      struct user_desc __user *info, int can_allocate);
 
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
 #endif /* __KERNEL__ */
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 4850e4b02b61..ff386ff50ed7 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -239,7 +239,7 @@ struct pci_bus;
 void set_pci_bus_resources_arch_default(struct pci_bus *b);
 
 #ifdef CONFIG_SMP
-#define mc_capable()			(boot_cpu_data.x86_max_cores > 1)
+#define mc_capable()	(cpus_weight(per_cpu(cpu_core_map, 0)) != nr_cpu_ids)
 #define smt_capable()			(smp_num_siblings > 1)
 #endif
 
diff --git a/arch/x86/include/asm/vmi.h b/arch/x86/include/asm/vmi.h
index b7c0dea119fe..61e08c0a2907 100644
--- a/arch/x86/include/asm/vmi.h
+++ b/arch/x86/include/asm/vmi.h
@@ -223,9 +223,15 @@ struct pci_header {
 } __attribute__((packed));
 
 /* Function prototypes for bootstrapping */
+#ifdef CONFIG_VMI
 extern void vmi_init(void);
+extern void vmi_activate(void);
 extern void vmi_bringup(void);
-extern void vmi_apply_boot_page_allocations(void);
+#else
+static inline void vmi_init(void) {}
+static inline void vmi_activate(void) {}
+static inline void vmi_bringup(void) {}
+#endif
 
 /* State needed to start an application processor in an SMP system. */
 struct vmi_ap_state {
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index e489ff9cb3e2..b62a7667828e 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -41,7 +41,7 @@ obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
 obj-y				+= process.o
 obj-y				+= i387.o xsave.o
 obj-y				+= ptrace.o
-obj-y				+= ds.o
+obj-$(CONFIG_X86_DS)		+= ds.o
 obj-$(CONFIG_X86_32)		+= tls.o
 obj-$(CONFIG_IA32_EMULATION)	+= tls.o
 obj-y				+= step.o
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index e4899e0e8787..a7b6dec6fc3f 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -187,6 +187,8 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
 
 	spin_lock_irqsave(&iommu->lock, flags);
 	ret = __iommu_queue_command(iommu, cmd);
+	if (!ret)
+		iommu->need_sync = 1;
 	spin_unlock_irqrestore(&iommu->lock, flags);
 
 	return ret;
@@ -210,10 +212,13 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
 	cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
 	CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
 
-	iommu->need_sync = 0;
-
 	spin_lock_irqsave(&iommu->lock, flags);
 
+	if (!iommu->need_sync)
+		goto out;
+
+	iommu->need_sync = 0;
+
 	ret = __iommu_queue_command(iommu, &cmd);
 
 	if (ret)
@@ -254,8 +259,6 @@ static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
 
 	ret = iommu_queue_command(iommu, &cmd);
 
-	iommu->need_sync = 1;
-
 	return ret;
 }
 
@@ -281,8 +284,6 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
 
 	ret = iommu_queue_command(iommu, &cmd);
 
-	iommu->need_sync = 1;
-
 	return ret;
 }
 
@@ -343,7 +344,7 @@ static int iommu_map(struct protection_domain *dom,
 	u64 __pte, *pte, *page;
 
 	bus_addr  = PAGE_ALIGN(bus_addr);
-	phys_addr = PAGE_ALIGN(bus_addr);
+	phys_addr = PAGE_ALIGN(phys_addr);
 
 	/* only support 512GB address spaces for now */
 	if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK))
@@ -599,7 +600,7 @@ static void dma_ops_free_pagetable(struct dma_ops_domain *dma_dom)
 			continue;
 
 		p2 = IOMMU_PTE_PAGE(p1[i]);
-		for (j = 0; j < 512; ++i) {
+		for (j = 0; j < 512; ++j) {
 			if (!IOMMU_PTE_PRESENT(p2[j]))
 				continue;
 			p3 = IOMMU_PTE_PAGE(p2[j]);
@@ -762,8 +763,6 @@ static void set_device_domain(struct amd_iommu *iommu,
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 
 	iommu_queue_inv_dev_entry(iommu, devid);
-
-	iommu->need_sync = 1;
 }
 
 /*****************************************************************************
@@ -858,6 +857,9 @@ static int get_device_resources(struct device *dev,
 		print_devid(_bdf, 1);
 	}
 
+	if (domain_for_device(_bdf) == NULL)
+		set_device_domain(*iommu, *domain, _bdf);
+
 	return 1;
 }
 
@@ -908,7 +910,7 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu,
 	if (address >= dom->aperture_size)
 		return;
 
-	WARN_ON(address & 0xfffULL || address > dom->aperture_size);
+	WARN_ON(address & ~PAGE_MASK || address >= dom->aperture_size);
 
 	pte  = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)];
 	pte += IOMMU_PTE_L0_INDEX(address);
@@ -920,8 +922,8 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu,
 
 /*
  * This function contains common code for mapping of a physically
- * contiguous memory region into DMA address space. It is uses by all
- * mapping functions provided by this IOMMU driver.
+ * contiguous memory region into DMA address space. It is used by all
+ * mapping functions provided with this IOMMU driver.
  * Must be called with the domain lock held.
  */
 static dma_addr_t __map_single(struct device *dev,
@@ -981,7 +983,8 @@ static void __unmap_single(struct amd_iommu *iommu,
 	dma_addr_t i, start;
 	unsigned int pages;
 
-	if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
+	if ((dma_addr == bad_dma_address) ||
+	    (dma_addr + size > dma_dom->aperture_size))
 		return;
 
 	pages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
@@ -1031,8 +1034,7 @@ static dma_addr_t map_single(struct device *dev, phys_addr_t paddr,
 	if (addr == bad_dma_address)
 		goto out;
 
-	if (unlikely(iommu->need_sync))
-		iommu_completion_wait(iommu);
+	iommu_completion_wait(iommu);
 
 out:
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -1060,8 +1062,7 @@ static void unmap_single(struct device *dev, dma_addr_t dma_addr,
 
 	__unmap_single(iommu, domain->priv, dma_addr, size, dir);
 
-	if (unlikely(iommu->need_sync))
-		iommu_completion_wait(iommu);
+	iommu_completion_wait(iommu);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
@@ -1127,8 +1128,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
 			goto unmap;
 	}
 
-	if (unlikely(iommu->need_sync))
-		iommu_completion_wait(iommu);
+	iommu_completion_wait(iommu);
 
 out:
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -1173,8 +1173,7 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist,
 		s->dma_address = s->dma_length = 0;
 	}
 
-	if (unlikely(iommu->need_sync))
-		iommu_completion_wait(iommu);
+	iommu_completion_wait(iommu);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
@@ -1225,8 +1224,7 @@ static void *alloc_coherent(struct device *dev, size_t size,
 		goto out;
 	}
 
-	if (unlikely(iommu->need_sync))
-		iommu_completion_wait(iommu);
+	iommu_completion_wait(iommu);
 
 out:
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -1257,8 +1255,7 @@ static void free_coherent(struct device *dev, size_t size,
 
 	__unmap_single(iommu, domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
 
-	if (unlikely(iommu->need_sync))
-		iommu_completion_wait(iommu);
+	iommu_completion_wait(iommu);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 04a7f960bbc0..16f94879b525 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1315,7 +1315,7 @@ void enable_x2apic(void)
 	}
 }
 
-void enable_IR_x2apic(void)
+void __init enable_IR_x2apic(void)
 {
 #ifdef CONFIG_INTR_REMAP
 	int ret;
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index d3dcd58b87cd..7f05f44b97e9 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -115,9 +115,20 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data)
 	u32 i = 0;
 
 	if (cpu_family == CPU_HW_PSTATE) {
-		rdmsr(MSR_PSTATE_STATUS, lo, hi);
-		i = lo & HW_PSTATE_MASK;
-		data->currpstate = i;
+		if (data->currpstate == HW_PSTATE_INVALID) {
+			/* read (initial) hw pstate if not yet set */
+			rdmsr(MSR_PSTATE_STATUS, lo, hi);
+			i = lo & HW_PSTATE_MASK;
+
+			/*
+			 * a workaround for family 11h erratum 311 might cause
+			 * an "out-of-range Pstate if the core is in Pstate-0
+			 */
+			if (i >= data->numps)
+				data->currpstate = HW_PSTATE_0;
+			else
+				data->currpstate = i;
+		}
 		return 0;
 	}
 	do {
@@ -1121,6 +1132,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	}
 
 	data->cpu = pol->cpu;
+	data->currpstate = HW_PSTATE_INVALID;
 
 	if (powernow_k8_cpu_init_acpi(data)) {
 		/*
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index ab48cfed4d96..65cfb5d7f77f 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -5,6 +5,19 @@
  *  http://www.gnu.org/licenses/gpl.html
  */
 
+
+enum pstate {
+	HW_PSTATE_INVALID = 0xff,
+	HW_PSTATE_0 = 0,
+	HW_PSTATE_1 = 1,
+	HW_PSTATE_2 = 2,
+	HW_PSTATE_3 = 3,
+	HW_PSTATE_4 = 4,
+	HW_PSTATE_5 = 5,
+	HW_PSTATE_6 = 6,
+	HW_PSTATE_7 = 7,
+};
+
 struct powernow_k8_data {
 	unsigned int cpu;
 
@@ -23,7 +36,9 @@ struct powernow_k8_data {
         u32 exttype; /* extended interface = 1 */
 
 	/* keep track of the current fid / vid or pstate */
-	u32 currvid, currfid, currpstate;
+	u32 currvid;
+	u32 currfid;
+	enum pstate currpstate;
 
 	/* the powernow_table includes all frequency and vid/fid pairings:
 	 * fid are the lower 8 bits of the index, vid are the upper 8 bits.
diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
index d1a121443bde..a2d1176c38ee 100644
--- a/arch/x86/kernel/ds.c
+++ b/arch/x86/kernel/ds.c
@@ -21,8 +21,6 @@
  */
 
 
-#ifdef CONFIG_X86_DS
-
 #include <asm/ds.h>
 
 #include <linux/errno.h>
@@ -211,14 +209,15 @@ static DEFINE_PER_CPU(struct ds_context *, system_context);
 static inline struct ds_context *ds_get_context(struct task_struct *task)
 {
 	struct ds_context *context;
+	unsigned long irq;
 
-	spin_lock(&ds_lock);
+	spin_lock_irqsave(&ds_lock, irq);
 
 	context = (task ? task->thread.ds_ctx : this_system_context);
 	if (context)
 		context->count++;
 
-	spin_unlock(&ds_lock);
+	spin_unlock_irqrestore(&ds_lock, irq);
 
 	return context;
 }
@@ -226,55 +225,46 @@ static inline struct ds_context *ds_get_context(struct task_struct *task)
 /*
  * Same as ds_get_context, but allocates the context and it's DS
  * structure, if necessary; returns NULL; if out of memory.
- *
- * pre: requires ds_lock to be held
  */
 static inline struct ds_context *ds_alloc_context(struct task_struct *task)
 {
 	struct ds_context **p_context =
 		(task ? &task->thread.ds_ctx : &this_system_context);
 	struct ds_context *context = *p_context;
+	unsigned long irq;
 
 	if (!context) {
-		spin_unlock(&ds_lock);
-
 		context = kzalloc(sizeof(*context), GFP_KERNEL);
-
-		if (!context) {
-			spin_lock(&ds_lock);
+		if (!context)
 			return NULL;
-		}
 
 		context->ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL);
 		if (!context->ds) {
 			kfree(context);
-			spin_lock(&ds_lock);
 			return NULL;
 		}
 
-		spin_lock(&ds_lock);
-		/*
-		 * Check for race - another CPU could have allocated
-		 * it meanwhile:
-		 */
+		spin_lock_irqsave(&ds_lock, irq);
+
 		if (*p_context) {
 			kfree(context->ds);
 			kfree(context);
-			return *p_context;
-		}
 
-		*p_context = context;
+			context = *p_context;
+		} else {
+			*p_context = context;
 
-		context->this = p_context;
-		context->task = task;
+			context->this = p_context;
+			context->task = task;
 
-		if (task)
-			set_tsk_thread_flag(task, TIF_DS_AREA_MSR);
+			if (task)
+				set_tsk_thread_flag(task, TIF_DS_AREA_MSR);
 
-		if (!task || (task == current))
-			wrmsr(MSR_IA32_DS_AREA, (unsigned long)context->ds, 0);
-
-		get_tracer(task);
+			if (!task || (task == current))
+				wrmsrl(MSR_IA32_DS_AREA,
+				       (unsigned long)context->ds);
+		}
+		spin_unlock_irqrestore(&ds_lock, irq);
 	}
 
 	context->count++;
@@ -288,10 +278,12 @@ static inline struct ds_context *ds_alloc_context(struct task_struct *task)
  */
 static inline void ds_put_context(struct ds_context *context)
 {
+	unsigned long irq;
+
 	if (!context)
 		return;
 
-	spin_lock(&ds_lock);
+	spin_lock_irqsave(&ds_lock, irq);
 
 	if (--context->count)
 		goto out;
@@ -313,7 +305,7 @@ static inline void ds_put_context(struct ds_context *context)
 	kfree(context->ds);
 	kfree(context);
  out:
-	spin_unlock(&ds_lock);
+	spin_unlock_irqrestore(&ds_lock, irq);
 }
 
 
@@ -384,6 +376,7 @@ static int ds_request(struct task_struct *task, void *base, size_t size,
 	struct ds_context *context;
 	unsigned long buffer, adj;
 	const unsigned long alignment = (1 << 3);
+	unsigned long irq;
 	int error = 0;
 
 	if (!ds_cfg.sizeof_ds)
@@ -398,26 +391,27 @@ static int ds_request(struct task_struct *task, void *base, size_t size,
 		return -EOPNOTSUPP;
 
 
-	spin_lock(&ds_lock);
-
-	error = -ENOMEM;
 	context = ds_alloc_context(task);
 	if (!context)
-		goto out_unlock;
+		return -ENOMEM;
+
+	spin_lock_irqsave(&ds_lock, irq);
 
 	error = -EPERM;
 	if (!check_tracer(task))
 		goto out_unlock;
 
+	get_tracer(task);
+
 	error = -EALREADY;
 	if (context->owner[qual] == current)
-		goto out_unlock;
+		goto out_put_tracer;
 	error = -EPERM;
 	if (context->owner[qual] != NULL)
-		goto out_unlock;
+		goto out_put_tracer;
 	context->owner[qual] = current;
 
-	spin_unlock(&ds_lock);
+	spin_unlock_irqrestore(&ds_lock, irq);
 
 
 	error = -ENOMEM;
@@ -465,10 +459,17 @@ static int ds_request(struct task_struct *task, void *base, size_t size,
  out_release:
 	context->owner[qual] = NULL;
 	ds_put_context(context);
+	put_tracer(task);
+	return error;
+
+ out_put_tracer:
+	spin_unlock_irqrestore(&ds_lock, irq);
+	ds_put_context(context);
+	put_tracer(task);
 	return error;
 
  out_unlock:
-	spin_unlock(&ds_lock);
+	spin_unlock_irqrestore(&ds_lock, irq);
 	ds_put_context(context);
 	return error;
 }
@@ -818,13 +819,21 @@ static const struct ds_configuration ds_cfg_var = {
 	.sizeof_ds    = sizeof(long) * 12,
 	.sizeof_field = sizeof(long),
 	.sizeof_rec[ds_bts]   = sizeof(long) * 3,
+#ifdef __i386__
 	.sizeof_rec[ds_pebs]  = sizeof(long) * 10
+#else
+	.sizeof_rec[ds_pebs]  = sizeof(long) * 18
+#endif
 };
 static const struct ds_configuration ds_cfg_64 = {
 	.sizeof_ds    = 8 * 12,
 	.sizeof_field = 8,
 	.sizeof_rec[ds_bts]   = 8 * 3,
+#ifdef __i386__
 	.sizeof_rec[ds_pebs]  = 8 * 10
+#else
+	.sizeof_rec[ds_pebs]  = 8 * 18
+#endif
 };
 
 static inline void
@@ -878,4 +887,3 @@ void ds_free(struct ds_context *context)
 	while (leftovers--)
 		ds_put_context(context);
 }
-#endif /* CONFIG_X86_DS */
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 1f20608d4ca8..b0f61f0dcd0a 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -58,7 +58,7 @@ void __cpuinit mxcsr_feature_mask_init(void)
 	stts();
 }
 
-void __init init_thread_xstate(void)
+void __cpuinit init_thread_xstate(void)
 {
 	if (!HAVE_HWFP) {
 		xstate_size = sizeof(struct i387_soft_struct);
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index c9513e1ff28d..9043251210fb 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -3608,27 +3608,7 @@ int __init io_apic_get_redir_entries (int ioapic)
 
 int __init probe_nr_irqs(void)
 {
-	int idx;
-	int nr = 0;
-#ifndef CONFIG_XEN
-	int nr_min = 32;
-#else
-	int nr_min = NR_IRQS;
-#endif
-
-	for (idx = 0; idx < nr_ioapics; idx++)
-		nr += io_apic_get_redir_entries(idx) + 1;
-
-	/* double it for hotplug and msi and nmi */
-	nr <<= 1;
-
-	/* something wrong ? */
-	if (nr < nr_min)
-		nr = nr_min;
-	if (WARN_ON(nr > NR_IRQS))
-		nr = NR_IRQS;
-
-	return nr;
+	return NR_IRQS;
 }
 
 /* --------------------------------------------------------------------------
@@ -3775,7 +3755,9 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 void __init setup_ioapic_dest(void)
 {
 	int pin, ioapic, irq, irq_entry;
+	struct irq_desc *desc;
 	struct irq_cfg *cfg;
+	cpumask_t mask;
 
 	if (skip_ioapic_setup == 1)
 		return;
@@ -3792,16 +3774,30 @@ void __init setup_ioapic_dest(void)
 			 * cpu is online.
 			 */
 			cfg = irq_cfg(irq);
-			if (!cfg->vector)
+			if (!cfg->vector) {
 				setup_IO_APIC_irq(ioapic, pin, irq,
 						  irq_trigger(irq_entry),
 						  irq_polarity(irq_entry));
+				continue;
+
+			}
+
+			/*
+			 * Honour affinities which have been set in early boot
+			 */
+			desc = irq_to_desc(irq);
+			if (desc->status &
+			    (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
+				mask = desc->affinity;
+			else
+				mask = TARGET_CPUS;
+
 #ifdef CONFIG_INTR_REMAP
-			else if (intr_remapping_enabled)
-				set_ir_ioapic_affinity_irq(irq, TARGET_CPUS);
-#endif
+			if (intr_remapping_enabled)
+				set_ir_ioapic_affinity_irq(irq, mask);
 			else
-				set_ioapic_affinity_irq(irq, TARGET_CPUS);
+#endif
+				set_ioapic_affinity_irq(irq, mask);
 		}
 
 	}
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 1c9cc431ea4f..e169ae9b6a62 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -128,7 +128,7 @@ static int kvm_register_clock(char *txt)
 }
 
 #ifdef CONFIG_X86_LOCAL_APIC
-static void __devinit kvm_setup_secondary_clock(void)
+static void __cpuinit kvm_setup_secondary_clock(void)
 {
 	/*
 	 * Now that the first cpu already had this clocksource initialized,
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index f98f4e1dba09..0f4c1fd5a1f4 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -604,6 +604,9 @@ static void __init __get_smp_config(unsigned int early)
 		printk(KERN_INFO "Using ACPI for processor (LAPIC) "
 		       "configuration information\n");
 
+	if (!mpf)
+		return;
+
 	printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
 	       mpf->mpf_specification);
 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
diff --git a/arch/x86/kernel/paravirt-spinlocks.c b/arch/x86/kernel/paravirt-spinlocks.c
index 0e9f1982b1dd..95777b0faa73 100644
--- a/arch/x86/kernel/paravirt-spinlocks.c
+++ b/arch/x86/kernel/paravirt-spinlocks.c
@@ -7,7 +7,8 @@
 
 #include <asm/paravirt.h>
 
-static void default_spin_lock_flags(struct raw_spinlock *lock, unsigned long flags)
+static inline void
+default_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
 {
 	__raw_spin_lock(lock);
 }
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index e1e731d78f38..d28bbdc35e4e 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -1567,7 +1567,7 @@ static int __init calgary_parse_options(char *p)
 				++p;
 			if (*p == '\0')
 				break;
-			bridge = simple_strtol(p, &endp, 0);
+			bridge = simple_strtoul(p, &endp, 0);
 			if (p == endp)
 				break;
 
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index a42b02b4df68..ba7ad83e20a8 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -123,6 +123,8 @@ static void free_iommu(unsigned long offset, int size)
 
 	spin_lock_irqsave(&iommu_bitmap_lock, flags);
 	iommu_area_free(iommu_gart_bitmap, offset, size);
+	if (offset >= next_bit)
+		next_bit = offset + size;
 	spin_unlock_irqrestore(&iommu_bitmap_lock, flags);
 }
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 9d5674f7b6cc..bdec76e55594 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -794,6 +794,9 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "Command line: %s\n", boot_command_line);
 #endif
 
+	/* VMI may relocate the fixmap; do this before touching ioremap area */
+	vmi_init();
+
 	early_cpu_init();
 	early_ioremap_init();
 
@@ -880,13 +883,8 @@ void __init setup_arch(char **cmdline_p)
 	check_efer();
 #endif
 
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
-	/*
-	 * Must be before kernel pagetables are setup
-	 * or fixmap area is touched.
-	 */
-	vmi_init();
-#endif
+	/* Must be before kernel pagetables are setup */
+	vmi_activate();
 
 	/* after early param, so could get panic from serial */
 	reserve_early_setup_data();
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 7b1093397319..f71f96fc9e62 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -294,9 +294,7 @@ static void __cpuinit start_secondary(void *unused)
 	 * fragile that we want to limit the things done here to the
 	 * most necessary things.
 	 */
-#ifdef CONFIG_VMI
 	vmi_bringup();
-#endif
 	cpu_init();
 	preempt_disable();
 	smp_callin();
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 8b6c393ab9fd..22fd6577156a 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -960,8 +960,6 @@ static inline int __init activate_vmi(void)
 
 void __init vmi_init(void)
 {
-	unsigned long flags;
-
 	if (!vmi_rom)
 		probe_vmi_rom();
 	else
@@ -973,13 +971,21 @@ void __init vmi_init(void)
 
 	reserve_top_address(-vmi_rom->virtual_top);
 
-	local_irq_save(flags);
-	activate_vmi();
-
 #ifdef CONFIG_X86_IO_APIC
 	/* This is virtual hardware; timer routing is wired correctly */
 	no_timer_check = 1;
 #endif
+}
+
+void vmi_activate(void)
+{
+	unsigned long flags;
+
+	if (!vmi_rom)
+		return;
+
+	local_irq_save(flags);
+	activate_vmi();
 	local_irq_restore(flags & X86_EFLAGS_IF);
 }
 
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index b13acb75e822..15c3e6999182 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -310,7 +310,7 @@ static void __init setup_xstate_init(void)
 /*
  * Enable and initialize the xsave feature.
  */
-void __init xsave_cntxt_init(void)
+void __ref xsave_cntxt_init(void)
 {
 	unsigned int eax, ebx, ecx, edx;
 
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index f1983d9477cd..410ddbc1aa2e 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1038,13 +1038,13 @@ static int kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 	}
 
 	rmap_write_protect(vcpu->kvm, sp->gfn);
+	kvm_unlink_unsync_page(vcpu->kvm, sp);
 	if (vcpu->arch.mmu.sync_page(vcpu, sp)) {
 		kvm_mmu_zap_page(vcpu->kvm, sp);
 		return 1;
 	}
 
 	kvm_mmu_flush_tlb(vcpu);
-	kvm_unlink_unsync_page(vcpu->kvm, sp);
 	return 0;
 }
 
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 613ec9aa674a..84eee43bbe74 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -331,6 +331,7 @@ static int FNAME(shadow_walk_entry)(struct kvm_shadow_walk *_sw,
 		r = kvm_read_guest_atomic(vcpu->kvm, gw->pte_gpa[level - 2],
 					  &curr_pte, sizeof(curr_pte));
 		if (r || curr_pte != gw->ptes[level - 2]) {
+			kvm_mmu_put_page(shadow_page, sptep);
 			kvm_release_pfn_clean(sw->pfn);
 			sw->sptep = NULL;
 			return 1;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index d06b4dc0e2ea..a4018b01e1f9 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3149,7 +3149,9 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 
 	if (cpu_has_virtual_nmis()) {
 		if (vcpu->arch.nmi_pending && !vcpu->arch.nmi_injected) {
-			if (vmx_nmi_enabled(vcpu)) {
+			if (vcpu->arch.interrupt.pending) {
+				enable_nmi_window(vcpu);
+			} else if (vmx_nmi_enabled(vcpu)) {
 				vcpu->arch.nmi_pending = false;
 				vcpu->arch.nmi_injected = true;
 			} else {
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 022cd41ea9b4..202864ad49a7 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -401,14 +401,13 @@ static int __init ppro_init(char **cpu_type)
 		*cpu_type = "i386/pii";
 		break;
 	case 6 ... 8:
+	case 10 ... 11:
 		*cpu_type = "i386/piii";
 		break;
 	case 9:
+	case 13:
 		*cpu_type = "i386/p6_mobile";
 		break;
-	case 10 ... 13:
-		*cpu_type = "i386/p6";
-		break;
 	case 14:
 		*cpu_type = "i386/core";
 		break;
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 3f1b81a83e2e..e9f80c744cf3 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -69,7 +69,7 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs)
 	int i;
 
 	if (!reset_value) {
-		reset_value = kmalloc(sizeof(unsigned) * num_counters,
+		reset_value = kmalloc(sizeof(reset_value[0]) * num_counters,
 					GFP_ATOMIC);
 		if (!reset_value)
 			return;
@@ -156,6 +156,8 @@ static void ppro_start(struct op_msrs const * const msrs)
 	unsigned int low, high;
 	int i;
 
+	if (!reset_value)
+		return;
 	for (i = 0; i < num_counters; ++i) {
 		if (reset_value[i]) {
 			CTRL_READ(low, high, msrs, i);
@@ -171,6 +173,8 @@ static void ppro_stop(struct op_msrs const * const msrs)
 	unsigned int low, high;
 	int i;
 
+	if (!reset_value)
+		return;
 	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index 3c27a809393b..2051dc96b8e9 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -496,21 +496,24 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015,
 			  pci_siemens_interrupt_controller);
 
 /*
- * Regular PCI devices have 256 bytes, but AMD Family 10h Opteron ext config
- * have 4096 bytes.  Even if the device is capable, that doesn't mean we can
- * access it.  Maybe we don't have a way to generate extended config space
- * accesses.   So check it
+ * Regular PCI devices have 256 bytes, but AMD Family 10h/11h CPUs have
+ * 4096 bytes configuration space for each function of their processor
+ * configuration space.
  */
-static void fam10h_pci_cfg_space_size(struct pci_dev *dev)
+static void amd_cpu_pci_cfg_space_size(struct pci_dev *dev)
 {
 	dev->cfg_size = pci_cfg_space_size_ext(dev);
 }
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1300, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1301, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1302, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1303, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1304, amd_cpu_pci_cfg_space_size);
 
 /*
  * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 688936044dc9..636ef4caa52d 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -661,12 +661,11 @@ void xen_set_pgd(pgd_t *ptr, pgd_t val)
  * For 64-bit, we must skip the Xen hole in the middle of the address
  * space, just after the big x86-64 virtual hole.
  */
-static int xen_pgd_walk(struct mm_struct *mm,
-			int (*func)(struct mm_struct *mm, struct page *,
-				    enum pt_level),
-			unsigned long limit)
+static int __xen_pgd_walk(struct mm_struct *mm, pgd_t *pgd,
+			  int (*func)(struct mm_struct *mm, struct page *,
+				      enum pt_level),
+			  unsigned long limit)
 {
-	pgd_t *pgd = mm->pgd;
 	int flush = 0;
 	unsigned hole_low, hole_high;
 	unsigned pgdidx_limit, pudidx_limit, pmdidx_limit;
@@ -753,6 +752,14 @@ out:
 	return flush;
 }
 
+static int xen_pgd_walk(struct mm_struct *mm,
+			int (*func)(struct mm_struct *mm, struct page *,
+				    enum pt_level),
+			unsigned long limit)
+{
+	return __xen_pgd_walk(mm, mm->pgd, func, limit);
+}
+
 /* If we're using split pte locks, then take the page's lock and
    return a pointer to it.  Otherwise return NULL. */
 static spinlock_t *xen_pte_lock(struct page *page, struct mm_struct *mm)
@@ -854,7 +861,7 @@ static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd)
 
 	xen_mc_batch();
 
-	 if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) {
+	if (__xen_pgd_walk(mm, pgd, xen_pin_page, USER_LIMIT)) {
 		/* re-enable interrupts for flushing */
 		xen_mc_issue(0);
 
@@ -998,7 +1005,7 @@ static void __xen_pgd_unpin(struct mm_struct *mm, pgd_t *pgd)
 		       PT_PMD);
 #endif
 
-	xen_pgd_walk(mm, xen_unpin_page, USER_LIMIT);
+	__xen_pgd_walk(mm, pgd, xen_unpin_page, USER_LIMIT);
 
 	xen_mc_issue(0);
 }
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index d77da613b1d2..acd9b6705e02 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -362,7 +362,7 @@ static void xen_cpu_die(unsigned int cpu)
 		alternatives_smp_switch(0);
 }
 
-static void xen_play_dead(void)
+static void __cpuinit xen_play_dead(void) /* used only with CPU_HOTPLUG */
 {
 	play_dead_common();
 	HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index d7422dc2a55c..9e1afae8461f 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -49,7 +49,7 @@ bool xen_vcpu_stolen(int vcpu);
 
 void xen_mark_init_mm_pinned(void);
 
-void __init xen_setup_vcpu_info_placement(void);
+void xen_setup_vcpu_info_placement(void);
 
 #ifdef CONFIG_SMP
 void xen_smp_init(void);
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 5c99ff8d2db8..6e72d661ae42 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -161,7 +161,7 @@ static inline struct request *start_ordered(struct request_queue *q,
 	/*
 	 * Prep proxy barrier request.
 	 */
-	blkdev_dequeue_request(rq);
+	elv_dequeue_request(q, rq);
 	q->orig_bar_rq = rq;
 	rq = &q->bar_rq;
 	blk_rq_init(q, rq);
@@ -219,7 +219,7 @@ int blk_do_ordered(struct request_queue *q, struct request **rqp)
 			 * This can happen when the queue switches to
 			 * ORDERED_NONE while this request is on it.
 			 */
-			blkdev_dequeue_request(rq);
+			elv_dequeue_request(q, rq);
 			if (__blk_end_request(rq, -EOPNOTSUPP,
 					      blk_rq_bytes(rq)))
 				BUG();
diff --git a/block/blk-core.c b/block/blk-core.c
index 10e8a64a5a5b..c36aa98fafa3 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -592,7 +592,7 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
 				   1 << QUEUE_FLAG_STACKABLE);
 	q->queue_lock		= lock;
 
-	blk_queue_segment_boundary(q, 0xffffffff);
+	blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
 
 	blk_queue_make_request(q, __make_request);
 	blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
@@ -1637,6 +1637,28 @@ int blk_insert_cloned_request(struct request_queue *q, struct request *rq)
 EXPORT_SYMBOL_GPL(blk_insert_cloned_request);
 
 /**
+ * blkdev_dequeue_request - dequeue request and start timeout timer
+ * @req: request to dequeue
+ *
+ * Dequeue @req and start timeout timer on it.  This hands off the
+ * request to the driver.
+ *
+ * Block internal functions which don't want to start timer should
+ * call elv_dequeue_request().
+ */
+void blkdev_dequeue_request(struct request *req)
+{
+	elv_dequeue_request(req->q, req);
+
+	/*
+	 * We are now handing the request to the hardware, add the
+	 * timeout handler.
+	 */
+	blk_add_timer(req);
+}
+EXPORT_SYMBOL(blkdev_dequeue_request);
+
+/**
  * __end_that_request_first - end I/O on a request
  * @req:      the request being processed
  * @error:    %0 for success, < %0 for error
@@ -1774,7 +1796,7 @@ static void end_that_request_last(struct request *req, int error)
 		blk_queue_end_tag(req->q, req);
 
 	if (blk_queued_rq(req))
-		blkdev_dequeue_request(req);
+		elv_dequeue_request(req->q, req);
 
 	if (unlikely(laptop_mode) && blk_fs_request(req))
 		laptop_io_completion();
diff --git a/block/blk-map.c b/block/blk-map.c
index 0f4b4b881811..2990447f45e9 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -224,7 +224,7 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq,
 		 */
 		bio_get(bio);
 		bio_endio(bio, 0);
-		bio_unmap_user(bio);
+		__blk_rq_unmap_user(bio);
 		return -EINVAL;
 	}
 
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 41392fbe19ff..afa55e14e278 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -125,6 +125,9 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
 	q->nr_requests = BLKDEV_MAX_RQ;
 	blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS);
 	blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
+	blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
+	blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
+
 	q->make_request_fn = mfn;
 	q->backing_dev_info.ra_pages =
 			(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
@@ -314,6 +317,7 @@ void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
 	/* zero is "infinity" */
 	t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
 	t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
+	t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask, b->seg_boundary_mask);
 
 	t->max_phys_segments = min(t->max_phys_segments, b->max_phys_segments);
 	t->max_hw_segments = min(t->max_hw_segments, b->max_hw_segments);
diff --git a/block/bsg.c b/block/bsg.c
index e8bd2475682a..e73e50daf3d0 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -202,6 +202,8 @@ static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
 		rq->timeout = q->sg_timeout;
 	if (!rq->timeout)
 		rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
+	if (rq->timeout < BLK_MIN_SG_TIMEOUT)
+		rq->timeout = BLK_MIN_SG_TIMEOUT;
 
 	return 0;
 }
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index 3d3e7a46f38c..67eb93cff699 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -677,6 +677,29 @@ static int compat_blkdev_driver_ioctl(struct block_device *bdev, fmode_t mode,
 	case DVD_WRITE_STRUCT:
 	case DVD_AUTH:
 		arg = (unsigned long)compat_ptr(arg);
+	/* These intepret arg as an unsigned long, not as a pointer,
+	 * so we must not do compat_ptr() conversion. */
+	case HDIO_SET_MULTCOUNT:
+	case HDIO_SET_UNMASKINTR:
+	case HDIO_SET_KEEPSETTINGS:
+	case HDIO_SET_32BIT:
+	case HDIO_SET_NOWERR:
+	case HDIO_SET_DMA:
+	case HDIO_SET_PIO_MODE:
+	case HDIO_SET_NICE:
+	case HDIO_SET_WCACHE:
+	case HDIO_SET_ACOUSTIC:
+	case HDIO_SET_BUSSTATE:
+	case HDIO_SET_ADDRESS:
+	case CDROMEJECT_SW:
+	case CDROM_SET_OPTIONS:
+	case CDROM_CLEAR_OPTIONS:
+	case CDROM_SELECT_SPEED:
+	case CDROM_SELECT_DISC:
+	case CDROM_MEDIA_CHANGED:
+	case CDROM_DRIVE_STATUS:
+	case CDROM_LOCKDOOR:
+	case CDROM_DEBUG:
 		break;
 	default:
 		/* unknown ioctl number */
@@ -699,8 +722,14 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 	struct backing_dev_info *bdi;
 	loff_t size;
 
+	/*
+	 * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
+	 * to updated it before every ioctl.
+	 */
 	if (file->f_flags & O_NDELAY)
-		mode |= FMODE_NDELAY_NOW;
+		mode |= FMODE_NDELAY;
+	else
+		mode &= ~FMODE_NDELAY;
 
 	switch (cmd) {
 	case HDIO_GETGEO:
diff --git a/block/elevator.c b/block/elevator.c
index 9ac82dde99dd..a6951f76ba0c 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -844,14 +844,7 @@ void elv_dequeue_request(struct request_queue *q, struct request *rq)
 	 */
 	if (blk_account_rq(rq))
 		q->in_flight++;
-
-	/*
-	 * We are now handing the request to the hardware, add the
-	 * timeout handler.
-	 */
-	blk_add_timer(rq);
 }
-EXPORT_SYMBOL(elv_dequeue_request);
 
 int elv_queue_empty(struct request_queue *q)
 {
diff --git a/block/genhd.c b/block/genhd.c
index 27549e470da5..2f7feda61e35 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -1102,6 +1102,7 @@ struct gendisk *alloc_disk_node(int minors, int node_id)
 			kfree(disk);
 			return NULL;
 		}
+		disk->node_id = node_id;
 		if (disk_expand_part_tbl(disk, 0)) {
 			free_part_stats(&disk->part0);
 			kfree(disk);
@@ -1116,7 +1117,6 @@ struct gendisk *alloc_disk_node(int minors, int node_id)
 		device_initialize(disk_to_dev(disk));
 		INIT_WORK(&disk->async_notify,
 			media_change_notify_thread);
-		disk->node_id = node_id;
 	}
 	return disk;
 }
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 5963cf91a3a0..d0bb92cbefb9 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -208,6 +208,8 @@ static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq,
 		rq->timeout = q->sg_timeout;
 	if (!rq->timeout)
 		rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
+	if (rq->timeout < BLK_MIN_SG_TIMEOUT)
+		rq->timeout = BLK_MIN_SG_TIMEOUT;
 
 	return 0;
 }
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 39dbd8e4dde1..dc20a34ba5ef 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -31,35 +31,63 @@ config CRYPTO_FIPS
 
 config CRYPTO_ALGAPI
 	tristate
+	select CRYPTO_ALGAPI2
 	help
 	  This option provides the API for cryptographic algorithms.
 
+config CRYPTO_ALGAPI2
+	tristate
+
 config CRYPTO_AEAD
 	tristate
+	select CRYPTO_AEAD2
 	select CRYPTO_ALGAPI
 
+config CRYPTO_AEAD2
+	tristate
+	select CRYPTO_ALGAPI2
+
 config CRYPTO_BLKCIPHER
 	tristate
+	select CRYPTO_BLKCIPHER2
 	select CRYPTO_ALGAPI
-	select CRYPTO_RNG
+
+config CRYPTO_BLKCIPHER2
+	tristate
+	select CRYPTO_ALGAPI2
+	select CRYPTO_RNG2
 
 config CRYPTO_HASH
 	tristate
+	select CRYPTO_HASH2
 	select CRYPTO_ALGAPI
 
+config CRYPTO_HASH2
+	tristate
+	select CRYPTO_ALGAPI2
+
 config CRYPTO_RNG
 	tristate
+	select CRYPTO_RNG2
 	select CRYPTO_ALGAPI
 
+config CRYPTO_RNG2
+	tristate
+	select CRYPTO_ALGAPI2
+
 config CRYPTO_MANAGER
 	tristate "Cryptographic algorithm manager"
-	select CRYPTO_AEAD
-	select CRYPTO_HASH
-	select CRYPTO_BLKCIPHER
+	select CRYPTO_MANAGER2
 	help
 	  Create default cryptographic template instantiations such as
 	  cbc(aes).
 
+config CRYPTO_MANAGER2
+	def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
+	select CRYPTO_AEAD2
+	select CRYPTO_HASH2
+	select CRYPTO_BLKCIPHER2
+
 config CRYPTO_GF128MUL
 	tristate "GF(2^128) multiplication functions (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
diff --git a/crypto/Makefile b/crypto/Makefile
index 5862b807334e..cd4a4ed078ff 100644
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -9,24 +9,24 @@ obj-$(CONFIG_CRYPTO_FIPS) += fips.o
 
 crypto_algapi-$(CONFIG_PROC_FS) += proc.o
 crypto_algapi-objs := algapi.o scatterwalk.o $(crypto_algapi-y)
-obj-$(CONFIG_CRYPTO_ALGAPI) += crypto_algapi.o
+obj-$(CONFIG_CRYPTO_ALGAPI2) += crypto_algapi.o
 
-obj-$(CONFIG_CRYPTO_AEAD) += aead.o
+obj-$(CONFIG_CRYPTO_AEAD2) += aead.o
 
 crypto_blkcipher-objs := ablkcipher.o
 crypto_blkcipher-objs += blkcipher.o
-obj-$(CONFIG_CRYPTO_BLKCIPHER) += crypto_blkcipher.o
-obj-$(CONFIG_CRYPTO_BLKCIPHER) += chainiv.o
-obj-$(CONFIG_CRYPTO_BLKCIPHER) += eseqiv.o
+obj-$(CONFIG_CRYPTO_BLKCIPHER2) += crypto_blkcipher.o
+obj-$(CONFIG_CRYPTO_BLKCIPHER2) += chainiv.o
+obj-$(CONFIG_CRYPTO_BLKCIPHER2) += eseqiv.o
 obj-$(CONFIG_CRYPTO_SEQIV) += seqiv.o
 
 crypto_hash-objs := hash.o
 crypto_hash-objs += ahash.o
-obj-$(CONFIG_CRYPTO_HASH) += crypto_hash.o
+obj-$(CONFIG_CRYPTO_HASH2) += crypto_hash.o
 
 cryptomgr-objs := algboss.o testmgr.o
 
-obj-$(CONFIG_CRYPTO_MANAGER) += cryptomgr.o
+obj-$(CONFIG_CRYPTO_MANAGER2) += cryptomgr.o
 obj-$(CONFIG_CRYPTO_HMAC) += hmac.o
 obj-$(CONFIG_CRYPTO_XCBC) += xcbc.o
 obj-$(CONFIG_CRYPTO_NULL) += crypto_null.o
@@ -73,8 +73,8 @@ obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += michael_mic.o
 obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o
 obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o
 obj-$(CONFIG_CRYPTO_LZO) += lzo.o
-obj-$(CONFIG_CRYPTO_RNG) += rng.o
-obj-$(CONFIG_CRYPTO_RNG) += krng.o
+obj-$(CONFIG_CRYPTO_RNG2) += rng.o
+obj-$(CONFIG_CRYPTO_RNG2) += krng.o
 obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o
 obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
 
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index ea92bac42c53..09c69806c1fc 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -176,16 +176,6 @@ static int __init dmi_enable_osi_linux(const struct dmi_system_id *d)
 	acpi_dmi_osi_linux(1, d);	/* enable */
 	return 0;
 }
-static int __init dmi_disable_osi_linux(const struct dmi_system_id *d)
-{
-	acpi_dmi_osi_linux(0, d);	/* disable */
-	return 0;
-}
-static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d)
-{
-	acpi_dmi_osi_linux(-1, d);	/* unknown */
-	return 0;
-}
 static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
 {
 	printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
@@ -193,295 +183,21 @@ static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
 	return 0;
 }
 
-/*
- * Most BIOS that invoke OSI(Linux) do nothing with it.
- * But some cause Linux to break.
- * Only a couple use it to make Linux run better.
- *
- * Thus, Linux should continue to disable OSI(Linux) by default,
- * should continue to discourage BIOS writers from using it, and
- * should whitelist the few existing systems that require it.
- *
- * If it appears clear a vendor isn't using OSI(Linux)
- * for anything constructive, blacklist them by name to disable
- * unnecessary dmesg warnings on all of their products.
- */
-
 static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
-	/*
-	 * Disable OSI(Linux) warnings on all "Acer, inc."
-	 *
-	 * _OSI(Linux) disables the latest Windows BIOS code:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"),
-	 * _OSI(Linux) effect unknown:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"),
-	 */
-	/*
-	 * note that dmi_check_system() uses strstr()
-	 * to match sub-strings rather than !strcmp(),
-	 * so "Acer" below matches "Acer, inc." above.
-	 */
-	/*
-	 * Disable OSI(Linux) warnings on all "Acer"
-	 *
-	 * _OSI(Linux) effect unknown:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"),
-	 *
-	 * _OSI(Linux) is a NOP:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"),
-	 */
-	{
-	.callback = dmi_disable_osi_linux,
-	.ident = "Acer",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-		},
-	},
-	/*
-	 * Disable OSI(Linux) warnings on all "Apple Computer, Inc."
-	 * Disable OSI(Linux) warnings on all "Apple Inc."
-	 *
-	 * _OSI(Linux) confirmed to be a NOP:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"),
-	 * _OSI(Linux) effect unknown:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"),
-	 */
-	{
-	.callback = dmi_disable_osi_linux,
-	.ident = "Apple",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
-		},
-	},
-	/*
-	 * Disable OSI(Linux) warnings on all "BenQ"
-	 *
-	 * _OSI(Linux) confirmed to be a NOP:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"),
-	 */
-	{
-	.callback = dmi_disable_osi_linux,
-	.ident = "BenQ",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "BenQ"),
-		},
-	},
-	/*
-	 * Disable OSI(Linux) warnings on all "Clevo Co."
-	 *
-	 * _OSI(Linux) confirmed to be a NOP:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"),
-	 */
-	{
-	.callback = dmi_disable_osi_linux,
-	.ident = "Clevo",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
-		},
-	},
-	/*
-	 * Disable OSI(Linux) warnings on all "COMPAL"
-	 *
-	 * _OSI(Linux) confirmed to be a NOP:
-	 * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"),
-	 * _OSI(Linux) unknown effect:
-	 * DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
-	 */
-	{
-	.callback = dmi_disable_osi_linux,
-	.ident = "Compal",
-	.matches = {
-		     DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
-		},
-	},
-	{ /* OSI(Linux) touches USB, unknown side-effect */
-	.callback = dmi_disable_osi_linux,
-	.ident = "Dell Dimension 5150",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"),
-		},
-	},
-	{ /* OSI(Linux) is a NOP */
-	.callback = dmi_disable_osi_linux,
-	.ident = "Dell i1501",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"),
-		},
-	},
-	{ /* OSI(Linux) effect unknown */
-	.callback = dmi_unknown_osi_linux,
-	.ident = "Dell Latitude D830",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"),
-		},
-	},
-	{ /* OSI(Linux) effect unknown */
-	.callback = dmi_unknown_osi_linux,
-	.ident = "Dell OptiPlex GX620",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"),
-		},
-	},
-	{ /* OSI(Linux) causes some USB initialization to not run */
-	.callback = dmi_unknown_osi_linux,
-	.ident = "Dell OptiPlex 755",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 755"),
-		},
-	},
-	{ /* OSI(Linux) effect unknown */
-	.callback = dmi_unknown_osi_linux,
-	.ident = "Dell PE 1900",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"),
-		},
-	},
-	{ /* OSI(Linux) is a NOP */
-	.callback = dmi_unknown_osi_linux,
-	.ident = "Dell PE 1950",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
-		},
-	},
-	{ /* OSI(Linux) is a NOP */
-	.callback = dmi_disable_osi_linux,
-	.ident = "Dell PE R200",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R200"),
-		},
-	},
-	{ /* OSI(Linux) touches USB */
-	.callback = dmi_disable_osi_linux,
-	.ident = "Dell PR 390",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"),
-		},
-	},
-	{ /* OSI(Linux) touches USB */
-	.callback = dmi_unknown_osi_linux,
-	.ident = "Dell PR 390",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 690"),
-		},
-	},
-	{ /* OSI(Linux) unknown - ASL looks benign, but may effect dock/SMM */
-	.callback = dmi_unknown_osi_linux,
-	.ident = "Dell PR M4300",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Precision M4300"),
-		},
-	},
-	{ /* OSI(Linux) is a NOP */
-	.callback = dmi_disable_osi_linux,
-	.ident = "Dell Vostro 1000",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Vostro   1000"),
-		},
-	},
-	{ /* OSI(Linux) effect unknown */
-	.callback = dmi_unknown_osi_linux,
-	.ident = "Dell PE SC440",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"),
-		},
-	},
-	{ /* OSI(Linux) effect unknown */
-	.callback = dmi_unknown_osi_linux,
-	.ident = "Dialogue Flybook V5",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"),
-		},
-	},
-	/*
-	 * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS"
-	 *
-	 * _OSI(Linux) disables latest Windows BIOS code:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"),
-	 * _OSI(Linux) confirmed to be a NOP:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
-	 * _OSI(Linux) unknown effect:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"),
-	 */
-	{
-	.callback = dmi_disable_osi_linux,
-	.ident = "Fujitsu Siemens",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
-		},
-	},
 	{
 	.callback = dmi_disable_osi_vista,
 	.ident = "Fujitsu Siemens",
 	.matches = {
 		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
-	 	     DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
 		},
 	},
+
 	/*
-	 * Disable OSI(Linux) warnings on all "Hewlett-Packard"
-	 *
-	 * _OSI(Linux) confirmed to be a NOP:
-	 * .ident = "HP Pavilion tx 1000"
-	 * DMI_MATCH(DMI_BOARD_NAME, "30BF"),
-	 * .ident = "HP Pavilion dv2000"
-	 * DMI_MATCH(DMI_BOARD_NAME, "30B5"),
-	 * .ident = "HP Pavilion dv5000",
-	 * DMI_MATCH(DMI_BOARD_NAME, "30A7"),
-	 * .ident = "HP Pavilion dv6300 30BC",
-	 * DMI_MATCH(DMI_BOARD_NAME, "30BC"),
-	 * .ident = "HP Pavilion dv6000",
-	 * DMI_MATCH(DMI_BOARD_NAME, "30B7"),
-	 * DMI_MATCH(DMI_BOARD_NAME, "30B8"),
-	 * .ident = "HP Pavilion dv9000",
-	 * DMI_MATCH(DMI_BOARD_NAME, "30B9"),
-	 * .ident = "HP Pavilion dv9500",
-	 * DMI_MATCH(DMI_BOARD_NAME, "30CB"),
-	 * .ident = "HP/Compaq Presario C500",
-	 * DMI_MATCH(DMI_BOARD_NAME, "30C6"),
-	 * .ident = "HP/Compaq Presario F500",
-	 * DMI_MATCH(DMI_BOARD_NAME, "30D3"),
-	 * _OSI(Linux) unknown effect:
-	 * .ident = "HP Pavilion dv6500",
-	 * DMI_MATCH(DMI_BOARD_NAME, "30D0"),
+	 * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
+	 * Linux ignores it, except for the machines enumerated below.
 	 */
-	{
-	.callback = dmi_disable_osi_linux,
-	.ident = "Hewlett-Packard",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		},
-	},
+
 	/*
 	 * Lenovo has a mix of systems OSI(Linux) situations
 	 * and thus we can not wildcard the vendor.
@@ -519,113 +235,6 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
 		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
 		},
 	},
-	{
-	.callback = dmi_disable_osi_linux,
-	.ident = "Lenovo 3000 V100",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-		     DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
-		},
-	},
-	{
-	.callback = dmi_disable_osi_linux,
-	.ident = "Lenovo 3000 N100",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-		     DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
-		},
-	},
-	/*
-	 * Disable OSI(Linux) warnings on all "LG Electronics"
-	 *
-	 * _OSI(Linux) confirmed to be a NOP:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"),
-	 * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
-	 *
-	 * unknown:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"),
-	 * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
-	 */
-	{
-	.callback = dmi_disable_osi_linux,
-	.ident = "LG",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
-		},
-	},
-	/* NEC - OSI(Linux) effect unknown */
-	{
-	.callback = dmi_unknown_osi_linux,
-	.ident = "NEC VERSA M360",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"),
-		},
-	},
-	/* Panasonic */
-	{
-	.callback = dmi_unknown_osi_linux,
-	.ident = "Panasonic",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
-			/* Toughbook CF-52 */
-		     DMI_MATCH(DMI_PRODUCT_NAME, "CF-52CCABVBG"),
-		},
-	},
-	/*
-	 * Disable OSI(Linux) warnings on all "Samsung Electronics"
-	 *
-	 * OSI(Linux) disables PNP0C32 and other BIOS code for Windows:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"),
-	 */
-	{
-	.callback = dmi_disable_osi_linux,
-	.ident = "Samsung",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
-		},
-	},
-	/*
-	 * Disable OSI(Linux) warnings on all "Sony Corporation"
-	 *
-	 * _OSI(Linux) is a NOP:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NR11S_S"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"),
-	 * _OSI(Linux) unknown effect:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"),
-	 */
-	{
-	.callback = dmi_disable_osi_linux,
-	.ident = "Sony",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
-		},
-	},
-	/*
-	 * Disable OSI(Linux) warnings on all "TOSHIBA"
-	 *
-	 * _OSI(Linux) breaks sound (bugzilla 7787):
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"),
-	 * _OSI(Linux) is a NOP:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"),
-	 * _OSI(Linux) unknown effect:
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"),
-	 * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"),
-	 */
-	{
-	.callback = dmi_disable_osi_linux,
-	.ident = "Toshiba",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-		},
-	},
 	{}
 };
 
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index cf41f9fc24a7..30f3ef236ecb 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -219,7 +219,8 @@ static void gpe_transaction(struct acpi_ec *ec, u8 status)
 	goto unlock;
 err:
 	/* false interrupt, state didn't change */
-	++ec->curr->irq_count;
+	if (in_interrupt())
+		++ec->curr->irq_count;
 unlock:
 	spin_unlock_irqrestore(&ec->curr_lock, flags);
 }
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 4be252145cb4..c8111424dcb8 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -35,7 +35,6 @@
 #include <linux/interrupt.h>
 #include <linux/kmod.h>
 #include <linux/delay.h>
-#include <linux/dmi.h>
 #include <linux/workqueue.h>
 #include <linux/nmi.h>
 #include <linux/acpi.h>
@@ -97,54 +96,44 @@ static DEFINE_SPINLOCK(acpi_res_lock);
 static char osi_additional_string[OSI_STRING_LENGTH_MAX];
 
 /*
- * "Ode to _OSI(Linux)"
+ * The story of _OSI(Linux)
  *
- * osi_linux -- Control response to BIOS _OSI(Linux) query.
+ * From pre-history through Linux-2.6.22,
+ * Linux responded TRUE upon a BIOS OSI(Linux) query.
  *
- * As Linux evolves, the features that it supports change.
- * So an OSI string such as "Linux" is not specific enough
- * to be useful across multiple versions of Linux.  It
- * doesn't identify any particular feature, interface,
- * or even any particular version of Linux...
+ * Unfortunately, reference BIOS writers got wind of this
+ * and put OSI(Linux) in their example code, quickly exposing
+ * this string as ill-conceived and opening the door to
+ * an un-bounded number of BIOS incompatibilities.
  *
- * Unfortunately, Linux-2.6.22 and earlier responded "yes"
- * to a BIOS _OSI(Linux) query.  When
- * a reference mobile BIOS started using it, its use
- * started to spread to many vendor platforms.
- * As it is not supportable, we need to halt that spread.
+ * For example, OSI(Linux) was used on resume to re-POST a
+ * video card on one system, because Linux at that time
+ * could not do a speedy restore in its native driver.
+ * But then upon gaining quick native restore capability,
+ * Linux has no way to tell the BIOS to skip the time-consuming
+ * POST -- putting Linux at a permanent performance disadvantage.
+ * On another system, the BIOS writer used OSI(Linux)
+ * to infer native OS support for IPMI!  On other systems,
+ * OSI(Linux) simply got in the way of Linux claiming to
+ * be compatible with other operating systems, exposing
+ * BIOS issues such as skipped device initialization.
  *
- * Today, most BIOS references to _OSI(Linux) are noise --
- * they have no functional effect and are just dead code
- * carried over from the reference BIOS.
- *
- * The next most common case is that _OSI(Linux) harms Linux,
- * usually by causing the BIOS to follow paths that are
- * not tested during Windows validation.
- *
- * Finally, there is a short list of platforms
- * where OSI(Linux) benefits Linux.
- *
- * In Linux-2.6.23, OSI(Linux) is first disabled by default.
- * DMI is used to disable the dmesg warning about OSI(Linux)
- * on platforms where it is known to have no effect.
- * But a dmesg warning remains for systems where
- * we do not know if OSI(Linux) is good or bad for the system.
- * DMI is also used to enable OSI(Linux) for the machines
- * that are known to need it.
+ * So "Linux" turned out to be a really poor chose of
+ * OSI string, and from Linux-2.6.23 onward we respond FALSE.
  *
  * BIOS writers should NOT query _OSI(Linux) on future systems.
- * It will be ignored by default, and to get Linux to
- * not ignore it will require a kernel source update to
- * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation.
+ * Linux will complain on the console when it sees it, and return FALSE.
+ * To get Linux to return TRUE for your system  will require
+ * a kernel source update to add a DMI entry,
+ * or boot with "acpi_osi=Linux"
  */
-#define OSI_LINUX_ENABLE 0
 
 static struct osi_linux {
 	unsigned int	enable:1;
 	unsigned int	dmi:1;
 	unsigned int	cmdline:1;
 	unsigned int	known:1;
-} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0};
+} osi_linux = { 0, 0, 0, 0};
 
 static void __init acpi_request_region (struct acpi_generic_address *addr,
 	unsigned int length, char *desc)
@@ -1296,34 +1285,6 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object)
 	return (AE_OK);
 }
 
-/**
- *	acpi_dmi_dump - dump DMI slots needed for blacklist entry
- *
- *	Returns 0 on success
- */
-static int acpi_dmi_dump(void)
-{
-
-	if (!dmi_available)
-		return -1;
-
-	printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n",
-		dmi_get_system_info(DMI_SYS_VENDOR));
-	printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n",
-		dmi_get_system_info(DMI_PRODUCT_NAME));
-	printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n",
-		dmi_get_system_info(DMI_PRODUCT_VERSION));
-	printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n",
-		dmi_get_system_info(DMI_BOARD_NAME));
-	printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n",
-		dmi_get_system_info(DMI_BIOS_VENDOR));
-	printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n",
-		dmi_get_system_info(DMI_BIOS_DATE));
-
-	return 0;
-}
-
-
 /******************************************************************************
  *
  * FUNCTION:    acpi_os_validate_interface
@@ -1350,21 +1311,6 @@ acpi_os_validate_interface (char *interface)
 			osi_linux.cmdline ? " via cmdline" :
 			osi_linux.dmi ? " via DMI" : "");
 
-		if (!osi_linux.dmi) {
-			if (acpi_dmi_dump())
-				printk(KERN_NOTICE PREFIX
-					"[please extract dmidecode output]\n");
-			printk(KERN_NOTICE PREFIX
-				"Please send DMI info above to "
-				"linux-acpi@vger.kernel.org\n");
-		}
-		if (!osi_linux.known && !osi_linux.cmdline) {
-			printk(KERN_NOTICE PREFIX
-				"If \"acpi_osi=%sLinux\" works better, "
-				"please notify linux-acpi@vger.kernel.org\n",
-				osi_linux.enable ? "!" : "");
-		}
-
 		if (osi_linux.enable)
 			return AE_OK;
 	}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index bd5253ee5c85..39b7233c3485 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -751,16 +751,6 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
 	if (!acpi_match_device_ids(device, button_device_ids))
 		device->wakeup.flags.run_wake = 1;
 
-	/*
-	 * Don't set Power button GPE as run_wake
-	 * if Fixed Power button is used
-	 */
-	if (!strcmp(device->pnp.hardware_id, "PNP0C0C") &&
-		!(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) {
-		device->wakeup.flags.run_wake = 0;
-		device->wakeup.flags.valid = 0;
-	}
-
       end:
 	if (ACPI_FAILURE(status))
 		device->flags.wake_capable = 0;
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 80c0868d0480..28a691cc625e 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -90,6 +90,18 @@ void __init acpi_old_suspend_ordering(void)
 	old_suspend_ordering = true;
 }
 
+/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states.  Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume.  Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware.  The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
+
 /**
  *	acpi_pm_disable_gpes - Disable the GPEs.
  */
@@ -235,7 +247,11 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
 	}
 
 	/* If ACPI is not enabled by the BIOS, we need to enable it here. */
-	acpi_enable();
+	if (set_sci_en_on_resume)
+		acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1);
+	else
+		acpi_enable();
+
 	/* Reprogram control registers and execute _BFS */
 	acpi_leave_sleep_state_prep(acpi_state);
 
@@ -323,6 +339,12 @@ static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
+{
+	set_sci_en_on_resume = true;
+	return 0;
+}
+
 static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 	{
 	.callback = init_old_suspend_ordering,
@@ -340,6 +362,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
 		},
 	},
+	{
+	.callback = init_set_sci_en_on_resume,
+	.ident = "Apple MacBook 1,1",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+		},
+	},
+	{
+	.callback = init_set_sci_en_on_resume,
+	.ident = "Apple MacMini 1,1",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+		},
+	},
 	{},
 };
 #endif /* CONFIG_SUSPEND */
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 66aac06f2ac5..40e60fc2e596 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -824,34 +824,36 @@ static int __init toshiba_acpi_init(void)
 			toshiba_acpi_exit();
 			return -ENOMEM;
 		}
-	}
 
-	/* Register input device for kill switch */
-	toshiba_acpi.poll_dev = input_allocate_polled_device();
-	if (!toshiba_acpi.poll_dev) {
-		printk(MY_ERR "unable to allocate kill-switch input device\n");
-		toshiba_acpi_exit();
-		return -ENOMEM;
-	}
-	toshiba_acpi.poll_dev->private = &toshiba_acpi;
-	toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
-	toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
-
-	toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
-	toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
-	toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
-	set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
-	set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
-	input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
-	input_sync(toshiba_acpi.poll_dev->input);
-
-	ret = input_register_polled_device(toshiba_acpi.poll_dev);
-	if (ret) {
-		printk(MY_ERR "unable to register kill-switch input device\n");
-		rfkill_free(toshiba_acpi.rfk_dev);
-		toshiba_acpi.rfk_dev = NULL;
-		toshiba_acpi_exit();
-		return ret;
+		/* Register input device for kill switch */
+		toshiba_acpi.poll_dev = input_allocate_polled_device();
+		if (!toshiba_acpi.poll_dev) {
+			printk(MY_ERR
+			       "unable to allocate kill-switch input device\n");
+			toshiba_acpi_exit();
+			return -ENOMEM;
+		}
+		toshiba_acpi.poll_dev->private = &toshiba_acpi;
+		toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+		toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+
+		toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+		toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+		/* Toshiba USB ID */
+		toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
+		set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+		set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+		input_report_switch(toshiba_acpi.poll_dev->input,
+				    SW_RFKILL_ALL, TRUE);
+		input_sync(toshiba_acpi.poll_dev->input);
+
+		ret = input_register_polled_device(toshiba_acpi.poll_dev);
+		if (ret) {
+			printk(MY_ERR
+			       "unable to register kill-switch input device\n");
+			toshiba_acpi_exit();
+			return ret;
+		}
 	}
 
 	return 0;
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index e827be36ee8d..f844941089bb 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -259,34 +259,26 @@ acpi_evaluate_integer(acpi_handle handle,
 		      struct acpi_object_list *arguments, unsigned long long *data)
 {
 	acpi_status status = AE_OK;
-	union acpi_object *element;
+	union acpi_object element;
 	struct acpi_buffer buffer = { 0, NULL };
 
-
 	if (!data)
 		return AE_BAD_PARAMETER;
 
-	element = kzalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
-	if (!element)
-		return AE_NO_MEMORY;
-
 	buffer.length = sizeof(union acpi_object);
-	buffer.pointer = element;
+	buffer.pointer = &element;
 	status = acpi_evaluate_object(handle, pathname, arguments, &buffer);
 	if (ACPI_FAILURE(status)) {
 		acpi_util_eval_error(handle, pathname, status);
-		kfree(element);
 		return status;
 	}
 
-	if (element->type != ACPI_TYPE_INTEGER) {
+	if (element.type != ACPI_TYPE_INTEGER) {
 		acpi_util_eval_error(handle, pathname, AE_BAD_DATA);
-		kfree(element);
 		return AE_BAD_DATA;
 	}
 
-	*data = element->integer.value;
-	kfree(element);
+	*data = element.integer.value;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data));
 
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 78fbec8ceda0..421b7c71e72d 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -153,7 +153,7 @@ config SATA_PROMISE
 	  If unsure, say N.
 
 config SATA_SX4
-	tristate "Promise SATA SX4 support"
+	tristate "Promise SATA SX4 support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for Promise Serial ATA SX4.
@@ -219,8 +219,8 @@ config PATA_ACPI
 	  otherwise unsupported hardware.
 
 config PATA_ALI
-	tristate "ALi PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "ALi PATA support"
+	depends on PCI
 	help
 	  This option enables support for the ALi ATA interfaces
 	  found on the many ALi chipsets.
@@ -263,7 +263,7 @@ config PATA_ATIIXP
 	  If unsure, say N.
 
 config PATA_CMD640_PCI
-	tristate "CMD640 PCI PATA support (Very Experimental)"
+	tristate "CMD640 PCI PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the CMD640 PCI IDE
@@ -291,8 +291,8 @@ config PATA_CS5520
 	  If unsure, say N.
 
 config PATA_CS5530
-	tristate "CS5530 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "CS5530 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the Cyrix/NatSemi/AMD CS5530
 	  companion chip used with the MediaGX/Geode processor family.
@@ -309,8 +309,8 @@ config PATA_CS5535
 	  If unsure, say N.
 
 config PATA_CS5536
-	tristate "CS5536 PATA support (Experimental)"
-	depends on PCI && X86 && !X86_64 && EXPERIMENTAL
+	tristate "CS5536 PATA support"
+	depends on PCI && X86 && !X86_64
 	help
 	  This option enables support for the AMD CS5536
 	  companion chip used with the Geode LX processor family.
@@ -363,7 +363,7 @@ config PATA_HPT37X
 	  If unsure, say N.
 
 config PATA_HPT3X2N
-	tristate "HPT 372N/302N PATA support (Very Experimental)"
+	tristate "HPT 372N/302N PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the N variant HPT PATA
@@ -389,8 +389,8 @@ config PATA_HPT3X3_DMA
 	  problems with DMA on this chipset.
 
 config PATA_ISAPNP
-	tristate "ISA Plug and Play PATA support (Experimental)"
-	depends on EXPERIMENTAL && ISAPNP
+	tristate "ISA Plug and Play PATA support"
+	depends on ISAPNP
 	help
 	  This option enables support for ISA plug & play ATA
 	  controllers such as those found on old soundcards.
@@ -498,8 +498,8 @@ config PATA_NINJA32
 	  If unsure, say N.
 
 config PATA_NS87410
-	tristate "Nat Semi NS87410 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Nat Semi NS87410 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the National Semiconductor
 	  NS87410 PCI-IDE controller.
@@ -507,8 +507,8 @@ config PATA_NS87410
 	  If unsure, say N.
 
 config PATA_NS87415
-	tristate "Nat Semi NS87415 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Nat Semi NS87415 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the National Semiconductor
 	  NS87415 PCI-IDE controller.
@@ -544,8 +544,8 @@ config PATA_PCMCIA
 	  If unsure, say N.
 
 config PATA_PDC_OLD
-	tristate "Older Promise PATA controller support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Older Promise PATA controller support"
+	depends on PCI
 	help
 	  This option enables support for the Promise 20246, 20262, 20263,
 	  20265 and 20267 adapters.
@@ -559,7 +559,7 @@ config PATA_QDI
 	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 
 config PATA_RADISYS
-	tristate "RADISYS 82600 PATA support (Very Experimental)"
+	tristate "RADISYS 82600 PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the RADISYS 82600
@@ -586,8 +586,8 @@ config PATA_RZ1000
 	  If unsure, say N.
 
 config PATA_SC1200
-	tristate "SC1200 PATA support (Very Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "SC1200 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the NatSemi/AMD SC1200 SoC
 	  companion chip used with the Geode processor family.
@@ -620,8 +620,8 @@ config PATA_SIL680
 	  If unsure, say N.
 
 config PATA_SIS
-	tristate "SiS PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "SiS PATA support"
+	depends on PCI
 	help
 	  This option enables support for SiS PATA controllers
 
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 8e37be19bbf5..c11936e13dd3 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1066,6 +1066,28 @@ static int piix_broken_suspend(void)
 		if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL))
 			return 1;
 
+	/* TECRA M4 sometimes forgets its identify and reports bogus
+	 * DMI information.  As the bogus information is a bit
+	 * generic, match as many entries as possible.  This manual
+	 * matching is necessary because dmi_system_id.matches is
+	 * limited to four entries.
+	 */
+	if (dmi_get_system_info(DMI_SYS_VENDOR) &&
+	    dmi_get_system_info(DMI_PRODUCT_NAME) &&
+	    dmi_get_system_info(DMI_PRODUCT_VERSION) &&
+	    dmi_get_system_info(DMI_PRODUCT_SERIAL) &&
+	    dmi_get_system_info(DMI_BOARD_VENDOR) &&
+	    dmi_get_system_info(DMI_BOARD_NAME) &&
+	    dmi_get_system_info(DMI_BOARD_VERSION) &&
+	    !strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") &&
+	    !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") &&
+	    !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") &&
+	    !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") &&
+	    !strcmp(dmi_get_system_info(DMI_BOARD_VENDOR), "TOSHIBA") &&
+	    !strcmp(dmi_get_system_info(DMI_BOARD_NAME), "Portable PC") &&
+	    !strcmp(dmi_get_system_info(DMI_BOARD_VERSION), "Version A0"))
+		return 1;
+
 	return 0;
 }
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4214bfb13bbd..5e2eb740df46 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2492,6 +2492,13 @@ int ata_dev_configure(struct ata_device *dev)
 		}
 	}
 
+	if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) {
+		ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires "
+			       "firmware update to be fully functional.\n");
+		ata_dev_printk(dev, KERN_WARNING, "         contact the vendor "
+			       "or visit http://ata.wiki.kernel.org.\n");
+	}
+
 	return 0;
 
 err_out_nosup:
@@ -4042,6 +4049,20 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "ST380817AS",		"3.42",		ATA_HORKAGE_NONCQ },
 	{ "ST3160023AS",	"3.42",		ATA_HORKAGE_NONCQ },
 
+	/* Seagate NCQ + FLUSH CACHE firmware bug */
+	{ "ST31500341AS",	"9JU138",	ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"9FZ136",	ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"9FZ164",	ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"9FZ134",	ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"9FZ182",	ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"9FZ162",	ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
 	/* Blacklist entries taken from Silicon Image 3124/3132
 	   Windows driver .inf file - also several Linux problem reports */
 	{ "HTS541060G9SA00",    "MB3OC60D",     ATA_HORKAGE_NONCQ, },
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index f2b83eabc7c7..a098ba8eaab6 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -382,10 +382,10 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* PCI clocking determines the ATA timing values to use */
 	/* info_hpt366 is safe against re-entry so we can scribble on it */
 	switch((reg1 & 0x700) >> 8) {
-		case 5:
+		case 9:
 			hpriv = &hpt366_40;
 			break;
-		case 9:
+		case 5:
 			hpriv = &hpt366_25;
 			break;
 		default:
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 4e466eae8b46..4dd9a3b031e4 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -44,7 +44,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_ninja32"
-#define DRV_VERSION "0.1.1"
+#define DRV_VERSION "0.1.3"
 
 
 /**
@@ -130,7 +130,8 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		return rc;
 	pci_set_master(dev);
 
-	/* Set up the register mappings */
+	/* Set up the register mappings. We use the I/O mapping as only the
+	   older chips also have MMIO on BAR 1 */
 	base = host->iomap[0];
 	if (!base)
 		return -ENOMEM;
@@ -167,8 +168,12 @@ static int ninja32_reinit_one(struct pci_dev *pdev)
 #endif
 
 static const struct pci_device_id ninja32[] = {
+	{ 0x10FC, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0x1145, 0x8008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0x1145, 0xf008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0x1145, 0xf02C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ },
 };
 
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index f8b3ffc8ae9e..c2e6fb9f2ef9 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -39,9 +39,11 @@
 #define RB500_CF_MAXPORTS	1
 #define RB500_CF_IO_DELAY	400
 
-#define RB500_CF_REG_CMD	0x0800
+#define RB500_CF_REG_BASE	0x0800
+#define RB500_CF_REG_ERR	0x080D
 #define RB500_CF_REG_CTRL	0x080E
-#define RB500_CF_REG_DATA	0x0C00
+/* 32bit buffered data register offset */
+#define RB500_CF_REG_DBUF32	0x0C00
 
 struct rb532_cf_info {
 	void __iomem	*iobase;
@@ -72,11 +74,12 @@ static void rb532_pata_exec_command(struct ata_port *ap,
 	rb532_pata_finish_io(ap);
 }
 
-static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
+static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
 				unsigned int buflen, int write_data)
 {
 	struct ata_port *ap = adev->link->ap;
 	void __iomem *ioaddr = ap->ioaddr.data_addr;
+	int retlen = buflen;
 
 	if (write_data) {
 		for (; buflen > 0; buflen--, buf++)
@@ -87,6 +90,7 @@ static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
 	}
 
 	rb532_pata_finish_io(adev->link->ap);
+	return retlen;
 }
 
 static void rb532_pata_freeze(struct ata_port *ap)
@@ -146,13 +150,14 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
 	ap->pio_mask	= 0x1f; /* PIO4 */
 	ap->flags	= ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
 
-	ap->ioaddr.cmd_addr	= info->iobase + RB500_CF_REG_CMD;
+	ap->ioaddr.cmd_addr	= info->iobase + RB500_CF_REG_BASE;
 	ap->ioaddr.ctl_addr	= info->iobase + RB500_CF_REG_CTRL;
 	ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
 
 	ata_sff_std_ports(&ap->ioaddr);
 
-	ap->ioaddr.data_addr	= info->iobase + RB500_CF_REG_DATA;
+	ap->ioaddr.data_addr	= info->iobase + RB500_CF_REG_DBUF32;
+	ap->ioaddr.error_addr	= info->iobase + RB500_CF_REG_ERR;
 }
 
 static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index d34236611752..e4be55e047f6 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -56,7 +56,6 @@ static const struct sis_laptop sis_laptop[] = {
 	{ 0x5513, 0x1043, 0x1107 },	/* ASUS A6K */
 	{ 0x5513, 0x1734, 0x105F },	/* FSC Amilo A1630 */
 	{ 0x5513, 0x1071, 0x8640 },     /* EasyNote K5305 */
-	{ 0x5513, 0x1039, 0x5513 },	/* Targa Visionary 1000 */
 	/* end marker */
 	{ 0, }
 };
diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c
index 615412364e99..6b969f8c684f 100644
--- a/drivers/atm/horizon.c
+++ b/drivers/atm/horizon.c
@@ -2705,7 +2705,7 @@ static int __devinit hrz_probe(struct pci_dev *pci_dev, const struct pci_device_
 
 	/* XXX DEV_LABEL is a guess */
 	if (!request_region(iobase, HRZ_IO_EXTENT, DEV_LABEL)) {
-		return -EINVAL;
+		err = -EINVAL;
 		goto out_disable;
 	}
 
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index f20bf359b84f..dc7a8c352da2 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -302,7 +302,7 @@ static struct kobj_type kobj_pkt_type_wqueue = {
 static void pkt_sysfs_dev_new(struct pktcdvd_device *pd)
 {
 	if (class_pktcdvd) {
-		pd->dev = device_create(class_pktcdvd, NULL, pd->pkt_dev, NULL,
+		pd->dev = device_create(class_pktcdvd, NULL, MKDEV(0, 0), NULL,
 					"%s", pd->name);
 		if (IS_ERR(pd->dev))
 			pd->dev = NULL;
@@ -2790,7 +2790,7 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev)
 	return 0;
 
 out_mem:
-	blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
+	blkdev_put(bdev, FMODE_READ | FMODE_NDELAY);
 	/* This is safe: open() is still holding a reference. */
 	module_put(THIS_MODULE);
 	return ret;
@@ -2975,7 +2975,7 @@ static int pkt_remove_dev(dev_t pkt_dev)
 	pkt_debugfs_dev_remove(pd);
 	pkt_sysfs_dev_remove(pd);
 
-	blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE);
+	blkdev_put(pd->bdev, FMODE_READ | FMODE_NDELAY);
 
 	remove_proc_entry(pd->name, pkt_proc);
 	DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name);
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index ecab9e67d47a..29e1dfafb7c6 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -194,7 +194,7 @@ struct ace_device {
 	int in_irq;
 
 	/* Details of hardware device */
-	unsigned long physaddr;
+	resource_size_t physaddr;
 	void __iomem *baseaddr;
 	int irq;
 	int bus_width;		/* 0 := 8 bit; 1 := 16 bit */
@@ -628,8 +628,8 @@ static void ace_fsm_dostate(struct ace_device *ace)
 
 		/* Okay, it's a data request, set it up for transfer */
 		dev_dbg(ace->dev,
-			"request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n",
-			req->sector, req->hard_nr_sectors,
+			"request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
+			(unsigned long long) req->sector, req->hard_nr_sectors,
 			req->current_nr_sectors, rq_data_dir(req));
 
 		ace->req = req;
@@ -935,7 +935,8 @@ static int __devinit ace_setup(struct ace_device *ace)
 	int rc;
 
 	dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
-	dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq);
+	dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n",
+		(unsigned long long)ace->physaddr, ace->irq);
 
 	spin_lock_init(&ace->lock);
 	init_completion(&ace->id_completion);
@@ -1017,8 +1018,8 @@ static int __devinit ace_setup(struct ace_device *ace)
 	/* Print the identification */
 	dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
 		 (version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
-	dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n",
-		ace->physaddr, ace->baseaddr, ace->irq);
+	dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n",
+		(unsigned long long) ace->physaddr, ace->baseaddr, ace->irq);
 
 	ace->media_change = 1;
 	ace_revalidate_disk(ace->gd);
@@ -1035,8 +1036,8 @@ err_alloc_disk:
 err_blk_initq:
 	iounmap(ace->baseaddr);
 err_ioremap:
-	dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n",
-	       ace->physaddr);
+	dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n",
+		 (unsigned long long) ace->physaddr);
 	return -ENOMEM;
 }
 
@@ -1059,7 +1060,7 @@ static void __devexit ace_teardown(struct ace_device *ace)
 }
 
 static int __devinit
-ace_alloc(struct device *dev, int id, unsigned long physaddr,
+ace_alloc(struct device *dev, int id, resource_size_t physaddr,
 	  int irq, int bus_width)
 {
 	struct ace_device *ace;
@@ -1119,7 +1120,7 @@ static void __devexit ace_free(struct device *dev)
 
 static int __devinit ace_probe(struct platform_device *dev)
 {
-	unsigned long physaddr = 0;
+	resource_size_t physaddr = 0;
 	int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
 	int id = dev->id;
 	int irq = NO_IRQ;
@@ -1165,7 +1166,7 @@ static int __devinit
 ace_of_probe(struct of_device *op, const struct of_device_id *match)
 {
 	struct resource res;
-	unsigned long physaddr;
+	resource_size_t physaddr;
 	const u32 *id;
 	int irq, bus_width, rc;
 
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index d16b02423d61..7d2e91cccb13 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -2081,10 +2081,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
 	if (!q)
 		return -ENXIO;
 
-	rq = blk_get_request(q, READ, GFP_KERNEL);
-	if (!rq)
-		return -ENOMEM;
-
 	cdi->last_sense = 0;
 
 	while (nframes) {
@@ -2096,9 +2092,17 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
 
 		len = nr * CD_FRAMESIZE_RAW;
 
+		rq = blk_get_request(q, READ, GFP_KERNEL);
+		if (!rq) {
+			ret = -ENOMEM;
+			break;
+		}
+
 		ret = blk_rq_map_user(q, rq, NULL, ubuf, len, GFP_KERNEL);
-		if (ret)
+		if (ret) {
+			blk_put_request(rq);
 			break;
+		}
 
 		rq->cmd[0] = GPCMD_READ_CD;
 		rq->cmd[1] = 1 << 2;
@@ -2124,6 +2128,7 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
 
 		if (blk_rq_unmap_user(bio))
 			ret = -EFAULT;
+		blk_put_request(rq);
 
 		if (ret)
 			break;
@@ -2133,7 +2138,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf,
 		ubuf += len;
 	}
 
-	blk_put_request(rq);
 	return ret;
 }
 
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index 0f004b65ec03..03f95ec08f59 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -27,7 +27,7 @@
 static int uninorth_rev;
 static int is_u3;
 
-static char __devinitdata *aperture = NULL;
+static char *aperture = NULL;
 
 static int uninorth_fetch_size(void)
 {
diff --git a/drivers/char/cp437.uni b/drivers/char/cp437.uni
index 1f06889a96b9..bc6163484f62 100644
--- a/drivers/char/cp437.uni
+++ b/drivers/char/cp437.uni
@@ -27,7 +27,7 @@
 0x0c	U+2640
 0x0d	U+266a
 0x0e	U+266b
-0x0f	U+263c
+0x0f	U+263c U+00a4
 0x10	U+25b6 U+25ba
 0x11	U+25c0 U+25c4
 0x12	U+2195
@@ -55,7 +55,7 @@
 0x24	U+0024
 0x25	U+0025
 0x26	U+0026
-0x27	U+0027
+0x27	U+0027 U+00b4
 0x28	U+0028
 0x29	U+0029
 0x2a	U+002a
@@ -84,7 +84,7 @@
 0x41	U+0041 U+00c0 U+00c1 U+00c2 U+00c3
 0x42	U+0042
 0x43	U+0043 U+00a9
-0x44	U+0044
+0x44	U+0044 U+00d0
 0x45	U+0045 U+00c8 U+00ca U+00cb
 0x46	U+0046
 0x47	U+0047
@@ -140,7 +140,7 @@
 0x79	U+0079 U+00fd
 0x7a	U+007a
 0x7b	U+007b
-0x7c	U+007c U+00a5
+0x7c	U+007c U+00a6
 0x7d	U+007d
 0x7e	U+007e
 #
@@ -263,10 +263,10 @@
 0xe8	U+03a6 U+00d8
 0xe9	U+0398
 0xea	U+03a9 U+2126
-0xeb	U+03b4
+0xeb	U+03b4 U+00f0
 0xec	U+221e
 0xed	U+03c6 U+00f8
-0xee	U+03b5
+0xee	U+03b5 U+2208
 0xef	U+2229
 0xf0	U+2261
 0xf1	U+00b1
diff --git a/drivers/char/ds1620.c b/drivers/char/ds1620.c
index 74e9cd81b5b2..61f0146e215d 100644
--- a/drivers/char/ds1620.c
+++ b/drivers/char/ds1620.c
@@ -43,52 +43,51 @@ static const char *fan_state[] = { "off", "on", "on (hardwired)" };
  *  chance that the WaveArtist driver could touch these bits to
  *  enable or disable the speaker.
  */
-extern spinlock_t gpio_lock;
 extern unsigned int system_rev;
 
 static inline void netwinder_ds1620_set_clk(int clk)
 {
-	gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0);
+	nw_gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0);
 }
 
 static inline void netwinder_ds1620_set_data(int dat)
 {
-	gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0);
+	nw_gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0);
 }
 
 static inline int netwinder_ds1620_get_data(void)
 {
-	return gpio_read() & GPIO_DATA;
+	return nw_gpio_read() & GPIO_DATA;
 }
 
 static inline void netwinder_ds1620_set_data_dir(int dir)
 {
-	gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0);
+	nw_gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0);
 }
 
 static inline void netwinder_ds1620_reset(void)
 {
-	cpld_modify(CPLD_DS_ENABLE, 0);
-	cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE);
+	nw_cpld_modify(CPLD_DS_ENABLE, 0);
+	nw_cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE);
 }
 
 static inline void netwinder_lock(unsigned long *flags)
 {
-	spin_lock_irqsave(&gpio_lock, *flags);
+	spin_lock_irqsave(&nw_gpio_lock, *flags);
 }
 
 static inline void netwinder_unlock(unsigned long *flags)
 {
-	spin_unlock_irqrestore(&gpio_lock, *flags);
+	spin_unlock_irqrestore(&nw_gpio_lock, *flags);
 }
 
 static inline void netwinder_set_fan(int i)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&gpio_lock, flags);
-	gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0);
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	nw_gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
 }
 
 static inline int netwinder_get_fan(void)
@@ -96,7 +95,7 @@ static inline int netwinder_get_fan(void)
 	if ((system_rev & 0xf000) == 0x4000)
 		return FAN_ALWAYS_ON;
 
-	return (gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF;
+	return (nw_gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF;
 }
 
 /*
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 44e5d60f517e..4b10770fa937 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -3739,7 +3739,7 @@ static int stli_getbrdnr(void)
  *	do is go probing around in the usual places hoping we can find it.
  */
 
-static int stli_findeisabrds(void)
+static int __init stli_findeisabrds(void)
 {
 	struct stlibrd *brdp;
 	unsigned int iobase, eid, i;
@@ -3935,7 +3935,7 @@ static struct stlibrd *stli_allocbrd(void)
  *	can find.
  */
 
-static int stli_initbrds(void)
+static int __init stli_initbrds(void)
 {
 	struct stlibrd *brdp, *nxtbrdp;
 	struct stlconf conf;
diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c
index 006be92ee3f3..8c7df5ba088f 100644
--- a/drivers/char/nwflash.c
+++ b/drivers/char/nwflash.c
@@ -58,8 +58,6 @@ static volatile unsigned char *FLASH_BASE;
 static int gbFlashSize = KFLASH_SIZE;
 static DEFINE_MUTEX(nwflash_mutex);
 
-extern spinlock_t gpio_lock;
-
 static int get_flash_id(void)
 {
 	volatile unsigned int c1, c2;
@@ -616,9 +614,9 @@ static void kick_open(void)
 	 * we want to write a bit pattern XXX1 to Xilinx to enable
 	 * the write gate, which will be open for about the next 2ms.
 	 */
-	spin_lock_irqsave(&gpio_lock, flags);
-	cpld_modify(1, 1);
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
 
 	/*
 	 * let the ISA bus to catch on...
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 3b23270eaa65..a8f15e6be594 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -418,7 +418,7 @@ static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id)
 							     TTY_OVERRUN);
 					/*
 					   If the flip buffer itself is
-					   overflowing, we still loose
+					   overflowing, we still lose
 					   the next incoming character.
 					 */
 					if (tty_buffer_request_room(tty, 1) !=
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 59f472143f08..1412a8d1e58d 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1795,12 +1795,15 @@ retry_open:
 	}
 #endif
 	if (device == MKDEV(TTYAUX_MAJOR, 1)) {
-		driver = tty_driver_kref_get(console_device(&index));
-		if (driver) {
-			/* Don't let /dev/console block */
-			filp->f_flags |= O_NONBLOCK;
-			noctty = 1;
-			goto got_driver;
+		struct tty_driver *console_driver = console_device(&index);
+		if (console_driver) {
+			driver = tty_driver_kref_get(console_driver);
+			if (driver) {
+				/* Don't let /dev/console block */
+				filp->f_flags |= O_NONBLOCK;
+				noctty = 1;
+				goto got_driver;
+			}
 		}
 		mutex_unlock(&tty_mutex);
 		return -ENODEV;
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index a5af6072e2b3..008176edbd64 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2274,7 +2274,7 @@ rescan_last_byte:
 				    continue; /* nothing to display */
 				}
 				/* Glyph not found */
-				if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) {
+				if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) {
 				    /* In legacy mode use the glyph we get by a 1:1 mapping.
 				       This would make absolutely no sense with Unicode in mind,
 				       but do this for ASCII characters since a font may lack
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index ed132fe55d3d..d16131949097 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -626,7 +626,7 @@ static int __devinit hwicap_setup(struct device *dev, int id,
 	if (!request_mem_region(drvdata->mem_start,
 					drvdata->mem_size, DRIVER_NAME)) {
 		dev_err(dev, "Couldn't lock memory region at %Lx\n",
-			regs_res->start);
+			(unsigned long long) regs_res->start);
 		retval = -EBUSY;
 		goto failed1;
 	}
@@ -645,9 +645,10 @@ static int __devinit hwicap_setup(struct device *dev, int id,
 	mutex_init(&drvdata->sem);
 	drvdata->is_open = 0;
 
-	dev_info(dev, "ioremap %lx to %p with size %Lx\n",
-		 (unsigned long int)drvdata->mem_start,
-			drvdata->base_address, drvdata->mem_size);
+	dev_info(dev, "ioremap %llx to %p with size %llx\n",
+		 (unsigned long long) drvdata->mem_start,
+		 drvdata->base_address,
+		 (unsigned long long) drvdata->mem_size);
 
 	cdev_init(&drvdata->cdev, &hwicap_fops);
 	drvdata->cdev.owner = THIS_MODULE;
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index b6ad3ac5916e..24607669a52b 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1357,7 +1357,7 @@ static int hw_supports(struct device *dev, __be32 desc_hdr_template)
 	return ret;
 }
 
-static int __devexit talitos_remove(struct of_device *ofdev)
+static int talitos_remove(struct of_device *ofdev)
 {
 	struct device *dev = &ofdev->dev;
 	struct talitos_private *priv = dev_get_drvdata(dev);
@@ -1622,7 +1622,7 @@ static struct of_platform_driver talitos_driver = {
 	.name = "talitos",
 	.match_table = talitos_match,
 	.probe = talitos_probe,
-	.remove = __devexit_p(talitos_remove),
+	.remove = talitos_remove,
 };
 
 static int __init talitos_init(void)
diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c
index e43bdc43a1bf..ebb037b78758 100644
--- a/drivers/edac/i82875p_edac.c
+++ b/drivers/edac/i82875p_edac.c
@@ -182,8 +182,6 @@ static struct pci_dev *mci_pdev;	/* init dev: in case that AGP code has
 					 * already registered driver
 					 */
 
-static int i82875p_registered = 1;
-
 static struct edac_pci_ctl_info *i82875p_pci;
 
 static void i82875p_get_error_info(struct mem_ctl_info *mci,
@@ -295,6 +293,7 @@ static int i82875p_setup_overfl_dev(struct pci_dev *pdev,
 				"%s(): pci_bus_add_device() Failed\n",
 				__func__);
 		}
+		pci_bus_assign_resources(dev->bus);
 	}
 
 	*ovrfl_pdev = dev;
@@ -409,6 +408,9 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
 		goto fail0;
 	}
 
+	/* Keeps mci available after edac_mc_del_mc() till edac_mc_free() */
+	kobject_get(&mci->edac_mci_kobj);
+
 	debugf3("%s(): init mci\n", __func__);
 	mci->dev = &pdev->dev;
 	mci->mtype_cap = MEM_FLAG_DDR;
@@ -451,6 +453,7 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
 	return 0;
 
 fail1:
+	kobject_put(&mci->edac_mci_kobj);
 	edac_mc_free(mci);
 
 fail0:
@@ -578,12 +581,11 @@ static void __exit i82875p_exit(void)
 {
 	debugf3("%s()\n", __func__);
 
+	i82875p_remove_one(mci_pdev);
+	pci_dev_put(mci_pdev);
+
 	pci_unregister_driver(&i82875p_driver);
 
-	if (!i82875p_registered) {
-		i82875p_remove_one(mci_pdev);
-		pci_dev_put(mci_pdev);
-	}
 }
 
 module_init(i82875p_init);
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 46610b090415..ab9c01e462ef 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -974,6 +974,7 @@ at_context_queue_packet(struct context *ctx, struct fw_packet *packet)
 			packet->ack = RCODE_SEND_ERROR;
 			return -1;
 		}
+		packet->payload_bus = payload_bus;
 
 		d[2].req_count    = cpu_to_le16(packet->payload_length);
 		d[2].data_address = cpu_to_le32(payload_bus);
@@ -1025,7 +1026,6 @@ static int handle_at_packet(struct context *context,
 	struct driver_data *driver_data;
 	struct fw_packet *packet;
 	struct fw_ohci *ohci = context->ohci;
-	dma_addr_t payload_bus;
 	int evt;
 
 	if (last->transfer_status == 0)
@@ -1038,9 +1038,8 @@ static int handle_at_packet(struct context *context,
 		/* This packet was cancelled, just continue. */
 		return 1;
 
-	payload_bus = le32_to_cpu(last->data_address);
-	if (payload_bus != 0)
-		dma_unmap_single(ohci->card.device, payload_bus,
+	if (packet->payload_bus)
+		dma_unmap_single(ohci->card.device, packet->payload_bus,
 				 packet->payload_length, DMA_TO_DEVICE);
 
 	evt = le16_to_cpu(last->transfer_status) & 0x1f;
@@ -1697,6 +1696,10 @@ static int ohci_cancel_packet(struct fw_card *card, struct fw_packet *packet)
 	if (packet->ack != 0)
 		goto out;
 
+	if (packet->payload_bus)
+		dma_unmap_single(ohci->card.device, packet->payload_bus,
+				 packet->payload_length, DMA_TO_DEVICE);
+
 	log_ar_at_event('T', packet->speed, packet->header, 0x20);
 	driver_data->packet = NULL;
 	packet->ack = RCODE_CANCELLED;
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 97df6dac3a82..e54403ee59e7 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -372,6 +372,11 @@ static const struct {
 	},
 	/* iPod mini */ {
 		.firmware_revision	= 0x0a2700,
+		.model			= 0x000022,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	},
+	/* iPod mini */ {
+		.firmware_revision	= 0x0a2700,
 		.model			= 0x000023,
 		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
 	},
diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c
index 022ac4fabb67..2884f876397b 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/fw-transaction.c
@@ -207,6 +207,7 @@ fw_fill_request(struct fw_packet *packet, int tcode, int tlabel,
 	packet->speed = speed;
 	packet->generation = generation;
 	packet->ack = 0;
+	packet->payload_bus = 0;
 }
 
 /**
@@ -581,6 +582,8 @@ fw_fill_response(struct fw_packet *response, u32 *request_header,
 		BUG();
 		return;
 	}
+
+	response->payload_bus = 0;
 }
 EXPORT_SYMBOL(fw_fill_response);
 
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h
index aed7dbb17cda..839466f0a795 100644
--- a/drivers/firewire/fw-transaction.h
+++ b/drivers/firewire/fw-transaction.h
@@ -27,6 +27,7 @@
 #include <linux/list.h>
 #include <linux/spinlock_types.h>
 #include <linux/timer.h>
+#include <linux/types.h>
 #include <linux/workqueue.h>
 
 #define TCODE_IS_READ_REQUEST(tcode)	(((tcode) & ~1) == 4)
@@ -153,6 +154,7 @@ struct fw_packet {
 	size_t header_length;
 	void *payload;
 	size_t payload_length;
+	dma_addr_t payload_bus;
 	u32 timestamp;
 
 	/*
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 3ab1e9cc4692..996097acb5e7 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -305,6 +305,8 @@ static void drm_cleanup(struct drm_device * dev)
 		return;
 	}
 
+	drm_vblank_cleanup(dev);
+
 	drm_lastclose(dev);
 
 	if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) &&
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 15c8dabc3e97..1e787f894b3c 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -94,7 +94,7 @@ static void vblank_disable_fn(unsigned long arg)
 	}
 }
 
-static void drm_vblank_cleanup(struct drm_device *dev)
+void drm_vblank_cleanup(struct drm_device *dev)
 {
 	/* Bail if the driver didn't call drm_vblank_init() */
 	if (dev->num_crtcs == 0)
@@ -278,8 +278,6 @@ int drm_irq_uninstall(struct drm_device * dev)
 
 	free_irq(dev->pdev->irq, dev);
 
-	drm_vblank_cleanup(dev);
-
 	return 0;
 }
 EXPORT_SYMBOL(drm_irq_uninstall);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 0d215e38606a..553dd4bc3075 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -847,15 +847,23 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	 * and the registers being closely associated.
 	 *
 	 * According to chipset errata, on the 965GM, MSI interrupts may
-	 * be lost or delayed
+	 * be lost or delayed, but we use them anyways to avoid
+	 * stuck interrupts on some machines.
 	 */
-	if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev))
+	if (!IS_I945G(dev) && !IS_I945GM(dev))
 		pci_enable_msi(dev->pdev);
 
 	intel_opregion_init(dev);
 
 	spin_lock_init(&dev_priv->user_irq_lock);
 
+	ret = drm_vblank_init(dev, I915_NUM_PIPE);
+
+	if (ret) {
+		(void) i915_driver_unload(dev);
+		return ret;
+	}
+
 	return ret;
 }
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ef1c0b8f8d07..adc972cc6bfc 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -47,6 +47,8 @@ enum pipe {
 	PIPE_B,
 };
 
+#define I915_NUM_PIPE	2
+
 /* Interface history:
  *
  * 1.1: Original.
@@ -132,6 +134,7 @@ typedef struct drm_i915_private {
 	int user_irq_refcount;
 	/** Cached value of IMR to avoid reads in updating the bitfield */
 	u32 irq_mask_reg;
+	u32 pipestat[2];
 
 	int tex_lru_log_granularity;
 	int allow_batchbuffer;
@@ -147,6 +150,7 @@ typedef struct drm_i915_private {
 	u32 saveDSPBCNTR;
 	u32 saveDSPARB;
 	u32 saveRENDERSTANDBY;
+	u32 saveHWS;
 	u32 savePIPEACONF;
 	u32 savePIPEBCONF;
 	u32 savePIPEASRC;
@@ -240,6 +244,10 @@ typedef struct drm_i915_private {
 		 * List of objects currently involved in rendering from the
 		 * ringbuffer.
 		 *
+		 * Includes buffers having the contents of their GPU caches
+		 * flushed, not necessarily primitives.  last_rendering_seqno
+		 * represents when the rendering involved will be completed.
+		 *
 		 * A reference is held on the buffer while on this list.
 		 */
 		struct list_head active_list;
@@ -249,6 +257,8 @@ typedef struct drm_i915_private {
 		 * still have a write_domain which needs to be flushed before
 		 * unbinding.
 		 *
+		 * last_rendering_seqno is 0 while an object is in this list.
+		 *
 		 * A reference is held on the buffer while on this list.
 		 */
 		struct list_head flushing_list;
@@ -257,6 +267,8 @@ typedef struct drm_i915_private {
 		 * LRU list of objects which are not in the ringbuffer and
 		 * are ready to unbind, but are still in the GTT.
 		 *
+		 * last_rendering_seqno is 0 while an object is in this list.
+		 *
 		 * A reference is not held on the buffer while on this list,
 		 * as merely being GTT-bound shouldn't prevent its being
 		 * freed, and we'll pull it off the list in the free path.
@@ -367,8 +379,8 @@ struct drm_i915_gem_object {
 	uint32_t agp_type;
 
 	/**
-	 * Flagging of which individual pages are valid in GEM_DOMAIN_CPU when
-	 * GEM_DOMAIN_CPU is not in the object's read domain.
+	 * If present, while GEM_DOMAIN_CPU is in the read domain this array
+	 * flags which individual pages are valid.
 	 */
 	uint8_t *page_cpu_valid;
 };
@@ -390,9 +402,6 @@ struct drm_i915_gem_request {
 	/** Time at which this request was emitted, in jiffies. */
 	unsigned long emitted_jiffies;
 
-	/** Cache domains that were flushed at the start of the request. */
-	uint32_t flush_domains;
-
 	struct list_head list;
 };
 
@@ -446,6 +455,13 @@ extern int i915_vblank_swap(struct drm_device *dev, void *data,
 			    struct drm_file *file_priv);
 extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask);
 
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+
 /* i915_mem.c */
 extern int i915_mem_alloc(struct drm_device *dev, void *data,
 			  struct drm_file *file_priv);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 6b4a2bd20640..ad672d854828 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -31,21 +31,23 @@
 #include "i915_drv.h"
 #include <linux/swap.h>
 
-static int
-i915_gem_object_set_domain(struct drm_gem_object *obj,
-			    uint32_t read_domains,
-			    uint32_t write_domain);
-static int
-i915_gem_object_set_domain_range(struct drm_gem_object *obj,
-				 uint64_t offset,
-				 uint64_t size,
-				 uint32_t read_domains,
-				 uint32_t write_domain);
-static int
-i915_gem_set_domain(struct drm_gem_object *obj,
-		    struct drm_file *file_priv,
-		    uint32_t read_domains,
-		    uint32_t write_domain);
+#define I915_GEM_GPU_DOMAINS	(~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+
+static void
+i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
+				  uint32_t read_domains,
+				  uint32_t write_domain);
+static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
+static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
+static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
+static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
+					     int write);
+static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj,
+					     int write);
+static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
+						     uint64_t offset,
+						     uint64_t size);
+static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj);
 static int i915_gem_object_get_page_list(struct drm_gem_object *obj);
 static void i915_gem_object_free_page_list(struct drm_gem_object *obj);
 static int i915_gem_object_wait_rendering(struct drm_gem_object *obj);
@@ -83,20 +85,14 @@ int
 i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
 			    struct drm_file *file_priv)
 {
-	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_gem_get_aperture *args = data;
-	struct drm_i915_gem_object *obj_priv;
 
 	if (!(dev->driver->driver_features & DRIVER_GEM))
 		return -ENODEV;
 
 	args->aper_size = dev->gtt_total;
-	args->aper_available_size = args->aper_size;
-
-	list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
-		if (obj_priv->pin_count > 0)
-			args->aper_available_size -= obj_priv->obj->size;
-	}
+	args->aper_available_size = (args->aper_size -
+				     atomic_read(&dev->pin_memory));
 
 	return 0;
 }
@@ -166,8 +162,8 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
 
 	mutex_lock(&dev->struct_mutex);
 
-	ret = i915_gem_object_set_domain_range(obj, args->offset, args->size,
-					       I915_GEM_DOMAIN_CPU, 0);
+	ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset,
+							args->size);
 	if (ret != 0) {
 		drm_gem_object_unreference(obj);
 		mutex_unlock(&dev->struct_mutex);
@@ -264,8 +260,7 @@ i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
 		mutex_unlock(&dev->struct_mutex);
 		return ret;
 	}
-	ret = i915_gem_set_domain(obj, file_priv,
-				  I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT);
+	ret = i915_gem_object_set_to_gtt_domain(obj, 1);
 	if (ret)
 		goto fail;
 
@@ -324,8 +319,7 @@ i915_gem_shmem_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
 
 	mutex_lock(&dev->struct_mutex);
 
-	ret = i915_gem_set_domain(obj, file_priv,
-				  I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU);
+	ret = i915_gem_object_set_to_cpu_domain(obj, 1);
 	if (ret) {
 		mutex_unlock(&dev->struct_mutex);
 		return ret;
@@ -401,7 +395,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 }
 
 /**
- * Called when user space prepares to use an object
+ * Called when user space prepares to use an object with the CPU, either
+ * through the mmap ioctl's mapping or a GTT mapping.
  */
 int
 i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
@@ -409,11 +404,26 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
 {
 	struct drm_i915_gem_set_domain *args = data;
 	struct drm_gem_object *obj;
+	uint32_t read_domains = args->read_domains;
+	uint32_t write_domain = args->write_domain;
 	int ret;
 
 	if (!(dev->driver->driver_features & DRIVER_GEM))
 		return -ENODEV;
 
+	/* Only handle setting domains to types used by the CPU. */
+	if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+		return -EINVAL;
+
+	if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+		return -EINVAL;
+
+	/* Having something in the write domain implies it's in the read
+	 * domain, and only that read domain.  Enforce that in the request.
+	 */
+	if (write_domain != 0 && read_domains != write_domain)
+		return -EINVAL;
+
 	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
 	if (obj == NULL)
 		return -EBADF;
@@ -421,10 +431,21 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
 	mutex_lock(&dev->struct_mutex);
 #if WATCH_BUF
 	DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n",
-		 obj, obj->size, args->read_domains, args->write_domain);
+		 obj, obj->size, read_domains, write_domain);
 #endif
-	ret = i915_gem_set_domain(obj, file_priv,
-				  args->read_domains, args->write_domain);
+	if (read_domains & I915_GEM_DOMAIN_GTT) {
+		ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
+
+		/* Silently promote "you're not bound, there was nothing to do"
+		 * to success, since the client was just asking us to
+		 * make sure everything was done.
+		 */
+		if (ret == -EINVAL)
+			ret = 0;
+	} else {
+		ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0);
+	}
+
 	drm_gem_object_unreference(obj);
 	mutex_unlock(&dev->struct_mutex);
 	return ret;
@@ -459,10 +480,9 @@ i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data,
 	obj_priv = obj->driver_private;
 
 	/* Pinned buffers may be scanout, so flush the cache */
-	if ((obj->write_domain & I915_GEM_DOMAIN_CPU) && obj_priv->pin_count) {
-		i915_gem_clflush_object(obj);
-		drm_agp_chipset_flush(dev);
-	}
+	if (obj_priv->pin_count)
+		i915_gem_object_flush_cpu_write_domain(obj);
+
 	drm_gem_object_unreference(obj);
 	mutex_unlock(&dev->struct_mutex);
 	return ret;
@@ -536,7 +556,7 @@ i915_gem_object_free_page_list(struct drm_gem_object *obj)
 }
 
 static void
-i915_gem_object_move_to_active(struct drm_gem_object *obj)
+i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno)
 {
 	struct drm_device *dev = obj->dev;
 	drm_i915_private_t *dev_priv = dev->dev_private;
@@ -550,8 +570,20 @@ i915_gem_object_move_to_active(struct drm_gem_object *obj)
 	/* Move from whatever list we were on to the tail of execution. */
 	list_move_tail(&obj_priv->list,
 		       &dev_priv->mm.active_list);
+	obj_priv->last_rendering_seqno = seqno;
 }
 
+static void
+i915_gem_object_move_to_flushing(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+	BUG_ON(!obj_priv->active);
+	list_move_tail(&obj_priv->list, &dev_priv->mm.flushing_list);
+	obj_priv->last_rendering_seqno = 0;
+}
 
 static void
 i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
@@ -566,6 +598,7 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
 	else
 		list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
 
+	obj_priv->last_rendering_seqno = 0;
 	if (obj_priv->active) {
 		obj_priv->active = 0;
 		drm_gem_object_unreference(obj);
@@ -614,10 +647,28 @@ i915_add_request(struct drm_device *dev, uint32_t flush_domains)
 
 	request->seqno = seqno;
 	request->emitted_jiffies = jiffies;
-	request->flush_domains = flush_domains;
 	was_empty = list_empty(&dev_priv->mm.request_list);
 	list_add_tail(&request->list, &dev_priv->mm.request_list);
 
+	/* Associate any objects on the flushing list matching the write
+	 * domain we're flushing with our flush.
+	 */
+	if (flush_domains != 0) {
+		struct drm_i915_gem_object *obj_priv, *next;
+
+		list_for_each_entry_safe(obj_priv, next,
+					 &dev_priv->mm.flushing_list, list) {
+			struct drm_gem_object *obj = obj_priv->obj;
+
+			if ((obj->write_domain & flush_domains) ==
+			    obj->write_domain) {
+				obj->write_domain = 0;
+				i915_gem_object_move_to_active(obj, seqno);
+			}
+		}
+
+	}
+
 	if (was_empty && !dev_priv->mm.suspended)
 		schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
 	return seqno;
@@ -680,30 +731,10 @@ i915_gem_retire_request(struct drm_device *dev,
 			 __func__, request->seqno, obj);
 #endif
 
-		if (obj->write_domain != 0) {
-			list_move_tail(&obj_priv->list,
-				       &dev_priv->mm.flushing_list);
-		} else {
+		if (obj->write_domain != 0)
+			i915_gem_object_move_to_flushing(obj);
+		else
 			i915_gem_object_move_to_inactive(obj);
-		}
-	}
-
-	if (request->flush_domains != 0) {
-		struct drm_i915_gem_object *obj_priv, *next;
-
-		/* Clear the write domain and activity from any buffers
-		 * that are just waiting for a flush matching the one retired.
-		 */
-		list_for_each_entry_safe(obj_priv, next,
-					 &dev_priv->mm.flushing_list, list) {
-			struct drm_gem_object *obj = obj_priv->obj;
-
-			if (obj->write_domain & request->flush_domains) {
-				obj->write_domain = 0;
-				i915_gem_object_move_to_inactive(obj);
-			}
-		}
-
 	}
 }
 
@@ -896,25 +927,10 @@ i915_gem_object_wait_rendering(struct drm_gem_object *obj)
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 	int ret;
 
-	/* If there are writes queued to the buffer, flush and
-	 * create a new seqno to wait for.
+	/* This function only exists to support waiting for existing rendering,
+	 * not for emitting required flushes.
 	 */
-	if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) {
-		uint32_t write_domain = obj->write_domain;
-#if WATCH_BUF
-		DRM_INFO("%s: flushing object %p from write domain %08x\n",
-			  __func__, obj, write_domain);
-#endif
-		i915_gem_flush(dev, 0, write_domain);
-
-		i915_gem_object_move_to_active(obj);
-		obj_priv->last_rendering_seqno = i915_add_request(dev,
-								  write_domain);
-		BUG_ON(obj_priv->last_rendering_seqno == 0);
-#if WATCH_LRU
-		DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj);
-#endif
-	}
+	BUG_ON((obj->write_domain & I915_GEM_GPU_DOMAINS) != 0);
 
 	/* If there is rendering queued on the buffer being evicted, wait for
 	 * it.
@@ -954,24 +970,16 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
 		return -EINVAL;
 	}
 
-	/* Wait for any rendering to complete
-	 */
-	ret = i915_gem_object_wait_rendering(obj);
-	if (ret) {
-		DRM_ERROR("wait_rendering failed: %d\n", ret);
-		return ret;
-	}
-
 	/* Move the object to the CPU domain to ensure that
 	 * any possible CPU writes while it's not in the GTT
 	 * are flushed when we go to remap it. This will
 	 * also ensure that all pending GPU writes are finished
 	 * before we unbind.
 	 */
-	ret = i915_gem_object_set_domain(obj, I915_GEM_DOMAIN_CPU,
-					 I915_GEM_DOMAIN_CPU);
+	ret = i915_gem_object_set_to_cpu_domain(obj, 1);
 	if (ret) {
-		DRM_ERROR("set_domain failed: %d\n", ret);
+		if (ret != -ERESTARTSYS)
+			DRM_ERROR("set_domain failed: %d\n", ret);
 		return ret;
 	}
 
@@ -1087,6 +1095,21 @@ i915_gem_evict_something(struct drm_device *dev)
 }
 
 static int
+i915_gem_evict_everything(struct drm_device *dev)
+{
+	int ret;
+
+	for (;;) {
+		ret = i915_gem_evict_something(dev);
+		if (ret != 0)
+			break;
+	}
+	if (ret == -ENOMEM)
+		return 0;
+	return ret;
+}
+
+static int
 i915_gem_object_get_page_list(struct drm_gem_object *obj)
 {
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
@@ -1172,7 +1195,8 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment)
 
 		ret = i915_gem_evict_something(dev);
 		if (ret != 0) {
-			DRM_ERROR("Failed to evict a buffer %d\n", ret);
+			if (ret != -ERESTARTSYS)
+				DRM_ERROR("Failed to evict a buffer %d\n", ret);
 			return ret;
 		}
 		goto search_free;
@@ -1232,6 +1256,143 @@ i915_gem_clflush_object(struct drm_gem_object *obj)
 	drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE);
 }
 
+/** Flushes any GPU write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	uint32_t seqno;
+
+	if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0)
+		return;
+
+	/* Queue the GPU write cache flushing we need. */
+	i915_gem_flush(dev, 0, obj->write_domain);
+	seqno = i915_add_request(dev, obj->write_domain);
+	obj->write_domain = 0;
+	i915_gem_object_move_to_active(obj, seqno);
+}
+
+/** Flushes the GTT write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj)
+{
+	if (obj->write_domain != I915_GEM_DOMAIN_GTT)
+		return;
+
+	/* No actual flushing is required for the GTT write domain.   Writes
+	 * to it immediately go to main memory as far as we know, so there's
+	 * no chipset flush.  It also doesn't land in render cache.
+	 */
+	obj->write_domain = 0;
+}
+
+/** Flushes the CPU write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+
+	if (obj->write_domain != I915_GEM_DOMAIN_CPU)
+		return;
+
+	i915_gem_clflush_object(obj);
+	drm_agp_chipset_flush(dev);
+	obj->write_domain = 0;
+}
+
+/**
+ * Moves a single object to the GTT read, and possibly write domain.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write)
+{
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	int ret;
+
+	/* Not valid to be called on unbound objects. */
+	if (obj_priv->gtt_space == NULL)
+		return -EINVAL;
+
+	i915_gem_object_flush_gpu_write_domain(obj);
+	/* Wait on any GPU rendering and flushing to occur. */
+	ret = i915_gem_object_wait_rendering(obj);
+	if (ret != 0)
+		return ret;
+
+	/* If we're writing through the GTT domain, then CPU and GPU caches
+	 * will need to be invalidated at next use.
+	 */
+	if (write)
+		obj->read_domains &= I915_GEM_DOMAIN_GTT;
+
+	i915_gem_object_flush_cpu_write_domain(obj);
+
+	/* It should now be out of any other write domains, and we can update
+	 * the domain values for our changes.
+	 */
+	BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
+	obj->read_domains |= I915_GEM_DOMAIN_GTT;
+	if (write) {
+		obj->write_domain = I915_GEM_DOMAIN_GTT;
+		obj_priv->dirty = 1;
+	}
+
+	return 0;
+}
+
+/**
+ * Moves a single object to the CPU read, and possibly write domain.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write)
+{
+	struct drm_device *dev = obj->dev;
+	int ret;
+
+	i915_gem_object_flush_gpu_write_domain(obj);
+	/* Wait on any GPU rendering and flushing to occur. */
+	ret = i915_gem_object_wait_rendering(obj);
+	if (ret != 0)
+		return ret;
+
+	i915_gem_object_flush_gtt_write_domain(obj);
+
+	/* If we have a partially-valid cache of the object in the CPU,
+	 * finish invalidating it and free the per-page flags.
+	 */
+	i915_gem_object_set_to_full_cpu_read_domain(obj);
+
+	/* Flush the CPU cache if it's still invalid. */
+	if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) {
+		i915_gem_clflush_object(obj);
+		drm_agp_chipset_flush(dev);
+
+		obj->read_domains |= I915_GEM_DOMAIN_CPU;
+	}
+
+	/* It should now be out of any other write domains, and we can update
+	 * the domain values for our changes.
+	 */
+	BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
+
+	/* If we're writing through the CPU, then the GPU read domains will
+	 * need to be invalidated at next use.
+	 */
+	if (write) {
+		obj->read_domains &= I915_GEM_DOMAIN_CPU;
+		obj->write_domain = I915_GEM_DOMAIN_CPU;
+	}
+
+	return 0;
+}
+
 /*
  * Set the next domain for the specified object. This
  * may not actually perform the necessary flushing/invaliding though,
@@ -1343,16 +1504,18 @@ i915_gem_clflush_object(struct drm_gem_object *obj)
  *		MI_FLUSH
  *		drm_agp_chipset_flush
  */
-static int
-i915_gem_object_set_domain(struct drm_gem_object *obj,
-			    uint32_t read_domains,
-			    uint32_t write_domain)
+static void
+i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
+				  uint32_t read_domains,
+				  uint32_t write_domain)
 {
 	struct drm_device		*dev = obj->dev;
 	struct drm_i915_gem_object	*obj_priv = obj->driver_private;
 	uint32_t			invalidate_domains = 0;
 	uint32_t			flush_domains = 0;
-	int				ret;
+
+	BUG_ON(read_domains & I915_GEM_DOMAIN_CPU);
+	BUG_ON(write_domain == I915_GEM_DOMAIN_CPU);
 
 #if WATCH_BUF
 	DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n",
@@ -1389,34 +1552,11 @@ i915_gem_object_set_domain(struct drm_gem_object *obj,
 		DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n",
 			 __func__, flush_domains, invalidate_domains);
 #endif
-		/*
-		 * If we're invaliding the CPU cache and flushing a GPU cache,
-		 * then pause for rendering so that the GPU caches will be
-		 * flushed before the cpu cache is invalidated
-		 */
-		if ((invalidate_domains & I915_GEM_DOMAIN_CPU) &&
-		    (flush_domains & ~(I915_GEM_DOMAIN_CPU |
-				       I915_GEM_DOMAIN_GTT))) {
-			ret = i915_gem_object_wait_rendering(obj);
-			if (ret)
-				return ret;
-		}
 		i915_gem_clflush_object(obj);
 	}
 
 	if ((write_domain | flush_domains) != 0)
 		obj->write_domain = write_domain;
-
-	/* If we're invalidating the CPU domain, clear the per-page CPU
-	 * domain list as well.
-	 */
-	if (obj_priv->page_cpu_valid != NULL &&
-	    (write_domain != 0 ||
-	     read_domains & I915_GEM_DOMAIN_CPU)) {
-		drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE,
-			 DRM_MEM_DRIVER);
-		obj_priv->page_cpu_valid = NULL;
-	}
 	obj->read_domains = read_domains;
 
 	dev->invalidate_domains |= invalidate_domains;
@@ -1427,47 +1567,94 @@ i915_gem_object_set_domain(struct drm_gem_object *obj,
 		 obj->read_domains, obj->write_domain,
 		 dev->invalidate_domains, dev->flush_domains);
 #endif
-	return 0;
 }
 
 /**
- * Set the read/write domain on a range of the object.
+ * Moves the object from a partially CPU read to a full one.
  *
- * Currently only implemented for CPU reads, otherwise drops to normal
- * i915_gem_object_set_domain().
+ * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(),
+ * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU).
  */
-static int
-i915_gem_object_set_domain_range(struct drm_gem_object *obj,
-				 uint64_t offset,
-				 uint64_t size,
-				 uint32_t read_domains,
-				 uint32_t write_domain)
+static void
+i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj)
 {
+	struct drm_device *dev = obj->dev;
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
-	int ret, i;
 
-	if (obj->read_domains & I915_GEM_DOMAIN_CPU)
-		return 0;
+	if (!obj_priv->page_cpu_valid)
+		return;
 
-	if (read_domains != I915_GEM_DOMAIN_CPU ||
-	    write_domain != 0)
-		return i915_gem_object_set_domain(obj,
-						  read_domains, write_domain);
+	/* If we're partially in the CPU read domain, finish moving it in.
+	 */
+	if (obj->read_domains & I915_GEM_DOMAIN_CPU) {
+		int i;
 
-	/* Wait on any GPU rendering to the object to be flushed. */
+		for (i = 0; i <= (obj->size - 1) / PAGE_SIZE; i++) {
+			if (obj_priv->page_cpu_valid[i])
+				continue;
+			drm_clflush_pages(obj_priv->page_list + i, 1);
+		}
+		drm_agp_chipset_flush(dev);
+	}
+
+	/* Free the page_cpu_valid mappings which are now stale, whether
+	 * or not we've got I915_GEM_DOMAIN_CPU.
+	 */
+	drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE,
+		 DRM_MEM_DRIVER);
+	obj_priv->page_cpu_valid = NULL;
+}
+
+/**
+ * Set the CPU read domain on a range of the object.
+ *
+ * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's
+ * not entirely valid.  The page_cpu_valid member of the object flags which
+ * pages have been flushed, and will be respected by
+ * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping
+ * of the whole object.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
+					  uint64_t offset, uint64_t size)
+{
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	int i, ret;
+
+	if (offset == 0 && size == obj->size)
+		return i915_gem_object_set_to_cpu_domain(obj, 0);
+
+	i915_gem_object_flush_gpu_write_domain(obj);
+	/* Wait on any GPU rendering and flushing to occur. */
 	ret = i915_gem_object_wait_rendering(obj);
-	if (ret)
+	if (ret != 0)
 		return ret;
+	i915_gem_object_flush_gtt_write_domain(obj);
 
+	/* If we're already fully in the CPU read domain, we're done. */
+	if (obj_priv->page_cpu_valid == NULL &&
+	    (obj->read_domains & I915_GEM_DOMAIN_CPU) != 0)
+		return 0;
+
+	/* Otherwise, create/clear the per-page CPU read domain flag if we're
+	 * newly adding I915_GEM_DOMAIN_CPU
+	 */
 	if (obj_priv->page_cpu_valid == NULL) {
 		obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE,
 						      DRM_MEM_DRIVER);
-	}
+		if (obj_priv->page_cpu_valid == NULL)
+			return -ENOMEM;
+	} else if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0)
+		memset(obj_priv->page_cpu_valid, 0, obj->size / PAGE_SIZE);
 
 	/* Flush the cache on any pages that are still invalid from the CPU's
 	 * perspective.
 	 */
-	for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; i++) {
+	for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE;
+	     i++) {
 		if (obj_priv->page_cpu_valid[i])
 			continue;
 
@@ -1476,39 +1663,14 @@ i915_gem_object_set_domain_range(struct drm_gem_object *obj,
 		obj_priv->page_cpu_valid[i] = 1;
 	}
 
-	return 0;
-}
-
-/**
- * Once all of the objects have been set in the proper domain,
- * perform the necessary flush and invalidate operations.
- *
- * Returns the write domains flushed, for use in flush tracking.
- */
-static uint32_t
-i915_gem_dev_set_domain(struct drm_device *dev)
-{
-	uint32_t flush_domains = dev->flush_domains;
-
-	/*
-	 * Now that all the buffers are synced to the proper domains,
-	 * flush and invalidate the collected domains
+	/* It should now be out of any other write domains, and we can update
+	 * the domain values for our changes.
 	 */
-	if (dev->invalidate_domains | dev->flush_domains) {
-#if WATCH_EXEC
-		DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
-			  __func__,
-			 dev->invalidate_domains,
-			 dev->flush_domains);
-#endif
-		i915_gem_flush(dev,
-			       dev->invalidate_domains,
-			       dev->flush_domains);
-		dev->invalidate_domains = 0;
-		dev->flush_domains = 0;
-	}
+	BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
 
-	return flush_domains;
+	obj->read_domains |= I915_GEM_DOMAIN_CPU;
+
+	return 0;
 }
 
 /**
@@ -1589,6 +1751,18 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
 			return -EINVAL;
 		}
 
+		if (reloc.write_domain & I915_GEM_DOMAIN_CPU ||
+		    reloc.read_domains & I915_GEM_DOMAIN_CPU) {
+			DRM_ERROR("reloc with read/write CPU domains: "
+				  "obj %p target %d offset %d "
+				  "read %08x write %08x",
+				  obj, reloc.target_handle,
+				  (int) reloc.offset,
+				  reloc.read_domains,
+				  reloc.write_domain);
+			return -EINVAL;
+		}
+
 		if (reloc.write_domain && target_obj->pending_write_domain &&
 		    reloc.write_domain != target_obj->pending_write_domain) {
 			DRM_ERROR("Write domain conflict: "
@@ -1629,19 +1803,11 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
 			continue;
 		}
 
-		/* Now that we're going to actually write some data in,
-		 * make sure that any rendering using this buffer's contents
-		 * is completed.
-		 */
-		i915_gem_object_wait_rendering(obj);
-
-		/* As we're writing through the gtt, flush
-		 * any CPU writes before we write the relocations
-		 */
-		if (obj->write_domain & I915_GEM_DOMAIN_CPU) {
-			i915_gem_clflush_object(obj);
-			drm_agp_chipset_flush(dev);
-			obj->write_domain = 0;
+		ret = i915_gem_object_set_to_gtt_domain(obj, 1);
+		if (ret != 0) {
+			drm_gem_object_unreference(target_obj);
+			i915_gem_object_unpin(obj);
+			return -EINVAL;
 		}
 
 		/* Map the page containing the relocation we're going to
@@ -1783,6 +1949,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 	int ret, i, pinned = 0;
 	uint64_t exec_offset;
 	uint32_t seqno, flush_domains;
+	int pin_tries;
 
 #if WATCH_EXEC
 	DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
@@ -1831,14 +1998,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 		return -EBUSY;
 	}
 
-	/* Zero the gloabl flush/invalidate flags. These
-	 * will be modified as each object is bound to the
-	 * gtt
-	 */
-	dev->invalidate_domains = 0;
-	dev->flush_domains = 0;
-
-	/* Look up object handles and perform the relocations */
+	/* Look up object handles */
 	for (i = 0; i < args->buffer_count; i++) {
 		object_list[i] = drm_gem_object_lookup(dev, file_priv,
 						       exec_list[i].handle);
@@ -1848,17 +2008,39 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 			ret = -EBADF;
 			goto err;
 		}
+	}
 
-		object_list[i]->pending_read_domains = 0;
-		object_list[i]->pending_write_domain = 0;
-		ret = i915_gem_object_pin_and_relocate(object_list[i],
-						       file_priv,
-						       &exec_list[i]);
-		if (ret) {
-			DRM_ERROR("object bind and relocate failed %d\n", ret);
+	/* Pin and relocate */
+	for (pin_tries = 0; ; pin_tries++) {
+		ret = 0;
+		for (i = 0; i < args->buffer_count; i++) {
+			object_list[i]->pending_read_domains = 0;
+			object_list[i]->pending_write_domain = 0;
+			ret = i915_gem_object_pin_and_relocate(object_list[i],
+							       file_priv,
+							       &exec_list[i]);
+			if (ret)
+				break;
+			pinned = i + 1;
+		}
+		/* success */
+		if (ret == 0)
+			break;
+
+		/* error other than GTT full, or we've already tried again */
+		if (ret != -ENOMEM || pin_tries >= 1) {
+			DRM_ERROR("Failed to pin buffers %d\n", ret);
 			goto err;
 		}
-		pinned = i + 1;
+
+		/* unpin all of our buffers */
+		for (i = 0; i < pinned; i++)
+			i915_gem_object_unpin(object_list[i]);
+
+		/* evict everyone we can from the aperture */
+		ret = i915_gem_evict_everything(dev);
+		if (ret)
+			goto err;
 	}
 
 	/* Set the pending read domains for the batch buffer to COMMAND */
@@ -1868,32 +2050,37 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 
 	i915_verify_inactive(dev, __FILE__, __LINE__);
 
+	/* Zero the global flush/invalidate flags. These
+	 * will be modified as new domains are computed
+	 * for each object
+	 */
+	dev->invalidate_domains = 0;
+	dev->flush_domains = 0;
+
 	for (i = 0; i < args->buffer_count; i++) {
 		struct drm_gem_object *obj = object_list[i];
-		struct drm_i915_gem_object *obj_priv = obj->driver_private;
 
-		if (obj_priv->gtt_space == NULL) {
-			/* We evicted the buffer in the process of validating
-			 * our set of buffers in.  We could try to recover by
-			 * kicking them everything out and trying again from
-			 * the start.
-			 */
-			ret = -ENOMEM;
-			goto err;
-		}
-
-		/* make sure all previous memory operations have passed */
-		ret = i915_gem_object_set_domain(obj,
-						 obj->pending_read_domains,
-						 obj->pending_write_domain);
-		if (ret)
-			goto err;
+		/* Compute new gpu domains and update invalidate/flush */
+		i915_gem_object_set_to_gpu_domain(obj,
+						  obj->pending_read_domains,
+						  obj->pending_write_domain);
 	}
 
 	i915_verify_inactive(dev, __FILE__, __LINE__);
 
-	/* Flush/invalidate caches and chipset buffer */
-	flush_domains = i915_gem_dev_set_domain(dev);
+	if (dev->invalidate_domains | dev->flush_domains) {
+#if WATCH_EXEC
+		DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
+			  __func__,
+			 dev->invalidate_domains,
+			 dev->flush_domains);
+#endif
+		i915_gem_flush(dev,
+			       dev->invalidate_domains,
+			       dev->flush_domains);
+		if (dev->flush_domains)
+			(void)i915_add_request(dev, dev->flush_domains);
+	}
 
 	i915_verify_inactive(dev, __FILE__, __LINE__);
 
@@ -1913,8 +2100,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 			      ~0);
 #endif
 
-	(void)i915_add_request(dev, flush_domains);
-
 	/* Exec the batchbuffer */
 	ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset);
 	if (ret) {
@@ -1942,10 +2127,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data,
 	i915_file_priv->mm.last_gem_seqno = seqno;
 	for (i = 0; i < args->buffer_count; i++) {
 		struct drm_gem_object *obj = object_list[i];
-		struct drm_i915_gem_object *obj_priv = obj->driver_private;
 
-		i915_gem_object_move_to_active(obj);
-		obj_priv->last_rendering_seqno = seqno;
+		i915_gem_object_move_to_active(obj, seqno);
 #if WATCH_LRU
 		DRM_INFO("%s: move to exec list %p\n", __func__, obj);
 #endif
@@ -2076,11 +2259,7 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data,
 	/* XXX - flush the CPU caches for pinned objects
 	 * as the X server doesn't manage domains yet
 	 */
-	if (obj->write_domain & I915_GEM_DOMAIN_CPU) {
-		i915_gem_clflush_object(obj);
-		drm_agp_chipset_flush(dev);
-		obj->write_domain = 0;
-	}
+	i915_gem_object_flush_cpu_write_domain(obj);
 	args->offset = obj_priv->gtt_offset;
 	drm_gem_object_unreference(obj);
 	mutex_unlock(&dev->struct_mutex);
@@ -2182,29 +2361,6 @@ void i915_gem_free_object(struct drm_gem_object *obj)
 	drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
 }
 
-static int
-i915_gem_set_domain(struct drm_gem_object *obj,
-		    struct drm_file *file_priv,
-		    uint32_t read_domains,
-		    uint32_t write_domain)
-{
-	struct drm_device *dev = obj->dev;
-	int ret;
-	uint32_t flush_domains;
-
-	BUG_ON(!mutex_is_locked(&dev->struct_mutex));
-
-	ret = i915_gem_object_set_domain(obj, read_domains, write_domain);
-	if (ret)
-		return ret;
-	flush_domains = i915_gem_dev_set_domain(obj->dev);
-
-	if (flush_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT))
-		(void) i915_add_request(dev, flush_domains);
-
-	return 0;
-}
-
 /** Unbinds all objects that are on the given buffer list. */
 static int
 i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head)
@@ -2299,29 +2455,52 @@ i915_gem_idle(struct drm_device *dev)
 
 	i915_gem_retire_requests(dev);
 
-	/* Active and flushing should now be empty as we've
-	 * waited for a sequence higher than any pending execbuffer
-	 */
-	BUG_ON(!list_empty(&dev_priv->mm.active_list));
-	BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+	if (!dev_priv->mm.wedged) {
+		/* Active and flushing should now be empty as we've
+		 * waited for a sequence higher than any pending execbuffer
+		 */
+		WARN_ON(!list_empty(&dev_priv->mm.active_list));
+		WARN_ON(!list_empty(&dev_priv->mm.flushing_list));
+		/* Request should now be empty as we've also waited
+		 * for the last request in the list
+		 */
+		WARN_ON(!list_empty(&dev_priv->mm.request_list));
+	}
 
-	/* Request should now be empty as we've also waited
-	 * for the last request in the list
+	/* Empty the active and flushing lists to inactive.  If there's
+	 * anything left at this point, it means that we're wedged and
+	 * nothing good's going to happen by leaving them there.  So strip
+	 * the GPU domains and just stuff them onto inactive.
 	 */
-	BUG_ON(!list_empty(&dev_priv->mm.request_list));
+	while (!list_empty(&dev_priv->mm.active_list)) {
+		struct drm_i915_gem_object *obj_priv;
+
+		obj_priv = list_first_entry(&dev_priv->mm.active_list,
+					    struct drm_i915_gem_object,
+					    list);
+		obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+		i915_gem_object_move_to_inactive(obj_priv->obj);
+	}
+
+	while (!list_empty(&dev_priv->mm.flushing_list)) {
+		struct drm_i915_gem_object *obj_priv;
 
-	/* Move all buffers out of the GTT. */
+		obj_priv = list_first_entry(&dev_priv->mm.flushing_list,
+					    struct drm_i915_gem_object,
+					    list);
+		obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+		i915_gem_object_move_to_inactive(obj_priv->obj);
+	}
+
+
+	/* Move all inactive buffers out of the GTT. */
 	ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list);
+	WARN_ON(!list_empty(&dev_priv->mm.inactive_list));
 	if (ret) {
 		mutex_unlock(&dev->struct_mutex);
 		return ret;
 	}
 
-	BUG_ON(!list_empty(&dev_priv->mm.active_list));
-	BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
-	BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
-	BUG_ON(!list_empty(&dev_priv->mm.request_list));
-
 	i915_gem_cleanup_ringbuffer(dev);
 	mutex_unlock(&dev->struct_mutex);
 
diff --git a/drivers/gpu/drm/i915/i915_gem_proc.c b/drivers/gpu/drm/i915/i915_gem_proc.c
index 93de15b4c9a7..e8d5abe1250e 100644
--- a/drivers/gpu/drm/i915/i915_gem_proc.c
+++ b/drivers/gpu/drm/i915/i915_gem_proc.c
@@ -166,10 +166,9 @@ static int i915_gem_request_info(char *buf, char **start, off_t offset,
 	list_for_each_entry(gem_request, &dev_priv->mm.request_list,
 			    list)
 	{
-		DRM_PROC_PRINT("    %d @ %d %08x\n",
+		DRM_PROC_PRINT("    %d @ %d\n",
 			       gem_request->seqno,
-			       (int) (jiffies - gem_request->emitted_jiffies),
-			       gem_request->flush_domains);
+			       (int) (jiffies - gem_request->emitted_jiffies));
 	}
 	if (len > request + offset)
 		return request;
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index e8b85ac4ca04..a8cb69469c64 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -119,9 +119,10 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
 			    dcc & DCC_CHANNEL_XOR_DISABLE) {
 				swizzle_x = I915_BIT_6_SWIZZLE_9_10;
 				swizzle_y = I915_BIT_6_SWIZZLE_9;
-			} else if (IS_I965GM(dev) || IS_GM45(dev)) {
-				/* GM965 only does bit 11-based channel
-				 * randomization
+			} else if ((IS_I965GM(dev) || IS_GM45(dev)) &&
+				   (dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
+				/* GM965/GM45 does either bit 11 or bit 17
+				 * swizzling.
 				 */
 				swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
 				swizzle_y = I915_BIT_6_SWIZZLE_9_11;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 82752d6177a4..69b9a42da95e 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -33,11 +33,23 @@
 
 #define MAX_NOPID ((u32)~0)
 
-/** These are the interrupts used by the driver */
-#define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT |		\
-				    I915_ASLE_INTERRUPT |		\
-				    I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
-				    I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+/**
+ * Interrupts that are always left unmasked.
+ *
+ * Since pipe events are edge-triggered from the PIPESTAT register to IIR,
+ * we leave them always unmasked in IMR and then control enabling them through
+ * PIPESTAT alone.
+ */
+#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
+				   I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |  \
+				   I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+
+/** Interrupts that we mask and unmask at runtime. */
+#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
+
+/** These are all of the interrupts used by the driver */
+#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \
+				    I915_INTERRUPT_ENABLE_VAR)
 
 void
 i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
@@ -59,6 +71,41 @@ i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
 	}
 }
 
+static inline u32
+i915_pipestat(int pipe)
+{
+	if (pipe == 0)
+		return PIPEASTAT;
+	if (pipe == 1)
+		return PIPEBSTAT;
+	BUG();
+}
+
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+	if ((dev_priv->pipestat[pipe] & mask) != mask) {
+		u32 reg = i915_pipestat(pipe);
+
+		dev_priv->pipestat[pipe] |= mask;
+		/* Enable the interrupt, clear any pending status */
+		I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
+		(void) I915_READ(reg);
+	}
+}
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+	if ((dev_priv->pipestat[pipe] & mask) != 0) {
+		u32 reg = i915_pipestat(pipe);
+
+		dev_priv->pipestat[pipe] &= ~mask;
+		I915_WRITE(reg, dev_priv->pipestat[pipe]);
+		(void) I915_READ(reg);
+	}
+}
+
 /**
  * i915_pipe_enabled - check if a pipe is enabled
  * @dev: DRM device
@@ -121,80 +168,102 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 {
 	struct drm_device *dev = (struct drm_device *) arg;
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	u32 iir;
+	u32 iir, new_iir;
 	u32 pipea_stats, pipeb_stats;
+	u32 vblank_status;
+	u32 vblank_enable;
 	int vblank = 0;
+	unsigned long irqflags;
+	int irq_received;
+	int ret = IRQ_NONE;
 
 	atomic_inc(&dev_priv->irq_received);
 
-	if (dev->pdev->msi_enabled)
-		I915_WRITE(IMR, ~0);
 	iir = I915_READ(IIR);
 
-	if (iir == 0) {
-		if (dev->pdev->msi_enabled) {
-			I915_WRITE(IMR, dev_priv->irq_mask_reg);
-			(void) I915_READ(IMR);
-		}
-		return IRQ_NONE;
+	if (IS_I965G(dev)) {
+		vblank_status = I915_START_VBLANK_INTERRUPT_STATUS;
+		vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE;
+	} else {
+		vblank_status = I915_VBLANK_INTERRUPT_STATUS;
+		vblank_enable = I915_VBLANK_INTERRUPT_ENABLE;
 	}
 
-	/*
-	 * Clear the PIPE(A|B)STAT regs before the IIR otherwise
-	 * we may get extra interrupts.
-	 */
-	if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) {
+	for (;;) {
+		irq_received = iir != 0;
+
+		/* Can't rely on pipestat interrupt bit in iir as it might
+		 * have been cleared after the pipestat interrupt was received.
+		 * It doesn't set the bit in iir again, but it still produces
+		 * interrupts (for non-MSI).
+		 */
+		spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 		pipea_stats = I915_READ(PIPEASTAT);
-		if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A))
-			pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
-					 PIPE_VBLANK_INTERRUPT_ENABLE);
-		else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
-					PIPE_VBLANK_INTERRUPT_STATUS)) {
+		pipeb_stats = I915_READ(PIPEBSTAT);
+		/*
+		 * Clear the PIPE(A|B)STAT regs before the IIR
+		 */
+		if (pipea_stats & 0x8000ffff) {
+			I915_WRITE(PIPEASTAT, pipea_stats);
+			irq_received = 1;
+		}
+
+		if (pipeb_stats & 0x8000ffff) {
+			I915_WRITE(PIPEBSTAT, pipeb_stats);
+			irq_received = 1;
+		}
+		spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+
+		if (!irq_received)
+			break;
+
+		ret = IRQ_HANDLED;
+
+		I915_WRITE(IIR, iir);
+		new_iir = I915_READ(IIR); /* Flush posted writes */
+
+		if (dev_priv->sarea_priv)
+			dev_priv->sarea_priv->last_dispatch =
+				READ_BREADCRUMB(dev_priv);
+
+		if (iir & I915_USER_INTERRUPT) {
+			dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+			DRM_WAKEUP(&dev_priv->irq_queue);
+		}
+
+		if (pipea_stats & vblank_status) {
 			vblank++;
 			drm_handle_vblank(dev, 0);
 		}
 
-		I915_WRITE(PIPEASTAT, pipea_stats);
-	}
-	if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) {
-		pipeb_stats = I915_READ(PIPEBSTAT);
-		/* Ack the event */
-		I915_WRITE(PIPEBSTAT, pipeb_stats);
-
-		/* The vblank interrupt gets enabled even if we didn't ask for
-		   it, so make sure it's shut down again */
-		if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B))
-			pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
-					 PIPE_VBLANK_INTERRUPT_ENABLE);
-		else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
-					PIPE_VBLANK_INTERRUPT_STATUS)) {
+		if (pipeb_stats & vblank_status) {
 			vblank++;
 			drm_handle_vblank(dev, 1);
 		}
 
-		if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS)
+		if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
+		    (iir & I915_ASLE_INTERRUPT))
 			opregion_asle_intr(dev);
-		I915_WRITE(PIPEBSTAT, pipeb_stats);
-	}
-
-	I915_WRITE(IIR, iir);
-	if (dev->pdev->msi_enabled)
-		I915_WRITE(IMR, dev_priv->irq_mask_reg);
-	(void) I915_READ(IIR); /* Flush posted writes */
-
-	if (dev_priv->sarea_priv)
-		dev_priv->sarea_priv->last_dispatch =
-			READ_BREADCRUMB(dev_priv);
 
-	if (iir & I915_USER_INTERRUPT) {
-		dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
-		DRM_WAKEUP(&dev_priv->irq_queue);
+		/* With MSI, interrupts are only generated when iir
+		 * transitions from zero to nonzero.  If another bit got
+		 * set while we were handling the existing iir bits, then
+		 * we would never get another interrupt.
+		 *
+		 * This is fine on non-MSI as well, as if we hit this path
+		 * we avoid exiting the interrupt handler only to generate
+		 * another one.
+		 *
+		 * Note that for MSI this could cause a stray interrupt report
+		 * if an interrupt landed in the time between writing IIR and
+		 * the posting read.  This should be rare enough to never
+		 * trigger the 99% of 100,000 interrupts test for disabling
+		 * stray interrupts.
+		 */
+		iir = new_iir;
 	}
 
-	if (iir & I915_ASLE_INTERRUPT)
-		opregion_asle_intr(dev);
-
-	return IRQ_HANDLED;
+	return ret;
 }
 
 static int i915_emit_irq(struct drm_device * dev)
@@ -330,48 +399,16 @@ int i915_irq_wait(struct drm_device *dev, void *data,
 int i915_enable_vblank(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	u32	pipestat_reg = 0;
-	u32	pipestat;
-	u32	interrupt = 0;
 	unsigned long irqflags;
 
-	switch (pipe) {
-	case 0:
-		pipestat_reg = PIPEASTAT;
-		interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
-		break;
-	case 1:
-		pipestat_reg = PIPEBSTAT;
-		interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
-		break;
-	default:
-		DRM_ERROR("tried to enable vblank on non-existent pipe %d\n",
-			  pipe);
-		return 0;
-	}
-
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
-	/* Enabling vblank events in IMR comes before PIPESTAT write, or
-	 * there's a race where the PIPESTAT vblank bit gets set to 1, so
-	 * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in
-	 * ISR flashes to 1, but the IIR bit doesn't get set to 1 because
-	 * IMR masks it.  It doesn't ever get set after we clear the masking
-	 * in IMR because the ISR bit is edge, not level-triggered, on the
-	 * OR of PIPESTAT bits.
-	 */
-	i915_enable_irq(dev_priv, interrupt);
-	pipestat = I915_READ(pipestat_reg);
 	if (IS_I965G(dev))
-		pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE;
+		i915_enable_pipestat(dev_priv, pipe,
+				     PIPE_START_VBLANK_INTERRUPT_ENABLE);
 	else
-		pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE;
-	/* Clear any stale interrupt status */
-	pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
-		     PIPE_VBLANK_INTERRUPT_STATUS);
-	I915_WRITE(pipestat_reg, pipestat);
-	(void) I915_READ(pipestat_reg);	/* Posting read */
+		i915_enable_pipestat(dev_priv, pipe,
+				     PIPE_VBLANK_INTERRUPT_ENABLE);
 	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
-
 	return 0;
 }
 
@@ -381,37 +418,12 @@ int i915_enable_vblank(struct drm_device *dev, int pipe)
 void i915_disable_vblank(struct drm_device *dev, int pipe)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	u32	pipestat_reg = 0;
-	u32	pipestat;
-	u32	interrupt = 0;
 	unsigned long irqflags;
 
-	switch (pipe) {
-	case 0:
-		pipestat_reg = PIPEASTAT;
-		interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
-		break;
-	case 1:
-		pipestat_reg = PIPEBSTAT;
-		interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
-		break;
-	default:
-		DRM_ERROR("tried to disable vblank on non-existent pipe %d\n",
-			  pipe);
-		return;
-		break;
-	}
-
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
-	i915_disable_irq(dev_priv, interrupt);
-	pipestat = I915_READ(pipestat_reg);
-	pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
-		      PIPE_VBLANK_INTERRUPT_ENABLE);
-	/* Clear any stale interrupt status */
-	pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
-		     PIPE_VBLANK_INTERRUPT_STATUS);
-	I915_WRITE(pipestat_reg, pipestat);
-	(void) I915_READ(pipestat_reg);	/* Posting read */
+	i915_disable_pipestat(dev_priv, pipe,
+			      PIPE_VBLANK_INTERRUPT_ENABLE |
+			      PIPE_START_VBLANK_INTERRUPT_ENABLE);
 	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 }
 
@@ -476,32 +488,35 @@ void i915_driver_irq_preinstall(struct drm_device * dev)
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 
 	I915_WRITE(HWSTAM, 0xeffe);
+	I915_WRITE(PIPEASTAT, 0);
+	I915_WRITE(PIPEBSTAT, 0);
 	I915_WRITE(IMR, 0xffffffff);
 	I915_WRITE(IER, 0x0);
+	(void) I915_READ(IER);
 }
 
 int i915_driver_irq_postinstall(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	int ret, num_pipes = 2;
-
-	/* Set initial unmasked IRQs to just the selected vblank pipes. */
-	dev_priv->irq_mask_reg = ~0;
-
-	ret = drm_vblank_init(dev, num_pipes);
-	if (ret)
-		return ret;
 
 	dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
-	dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
-	dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
 
 	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
 
-	dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK;
+	/* Unmask the interrupts that we always want on. */
+	dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
+
+	dev_priv->pipestat[0] = 0;
+	dev_priv->pipestat[1] = 0;
+
+	/* Disable pipe interrupt enables, clear pending pipe status */
+	I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+	I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+	/* Clear pending interrupt status */
+	I915_WRITE(IIR, I915_READ(IIR));
 
-	I915_WRITE(IMR, dev_priv->irq_mask_reg);
 	I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK);
+	I915_WRITE(IMR, dev_priv->irq_mask_reg);
 	(void) I915_READ(IER);
 
 	opregion_enable_asle(dev);
@@ -513,7 +528,6 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
 void i915_driver_irq_uninstall(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
-	u32 temp;
 
 	if (!dev_priv)
 		return;
@@ -521,13 +535,12 @@ void i915_driver_irq_uninstall(struct drm_device * dev)
 	dev_priv->vblank_pipe = 0;
 
 	I915_WRITE(HWSTAM, 0xffffffff);
+	I915_WRITE(PIPEASTAT, 0);
+	I915_WRITE(PIPEBSTAT, 0);
 	I915_WRITE(IMR, 0xffffffff);
 	I915_WRITE(IER, 0x0);
 
-	temp = I915_READ(PIPEASTAT);
-	I915_WRITE(PIPEASTAT, temp);
-	temp = I915_READ(PIPEBSTAT);
-	I915_WRITE(PIPEBSTAT, temp);
-	temp = I915_READ(IIR);
-	I915_WRITE(IIR, temp);
+	I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+	I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+	I915_WRITE(IIR, I915_READ(IIR));
 }
diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
index 1787a0c7e3ab..13ae731a33db 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -235,17 +235,15 @@ void opregion_enable_asle(struct drm_device *dev)
 	struct opregion_asle *asle = dev_priv->opregion.asle;
 
 	if (asle) {
-		u32 pipeb_stats = I915_READ(PIPEBSTAT);
 		if (IS_MOBILE(dev)) {
-			/* Many devices trigger events with a write to the
-			   legacy backlight controller, so we need to ensure
-			   that it's able to generate interrupts */
-			I915_WRITE(PIPEBSTAT, pipeb_stats |=
-				   I915_LEGACY_BLC_EVENT_ENABLE);
-			i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT |
-					I915_DISPLAY_PIPE_B_EVENT_INTERRUPT);
-		} else
-			i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT);
+			unsigned long irqflags;
+
+			spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+			i915_enable_pipestat(dev_priv, 1,
+					     I915_LEGACY_BLC_EVENT_ENABLE);
+			spin_unlock_irqrestore(&dev_priv->user_irq_lock,
+					       irqflags);
+		}
 
 		asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
 			ASLE_PFMB_EN;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0e476eba36e6..9d24aaeb8a45 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -522,6 +522,7 @@
 #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED	(2 << 0)
 #define DCC_ADDRESSING_MODE_MASK			(3 << 0)
 #define DCC_CHANNEL_XOR_DISABLE				(1 << 10)
+#define DCC_CHANNEL_XOR_BIT_17				(1 << 9)
 
 /** 965 MCH register controlling DRAM channel configuration */
 #define C0DRB3			0x10206
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 5ddc6e595c0c..5d84027ee8f3 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -244,6 +244,9 @@ int i915_save_state(struct drm_device *dev)
 	if (IS_I965G(dev) && IS_MOBILE(dev))
 		dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
 
+	/* Hardware status page */
+	dev_priv->saveHWS = I915_READ(HWS_PGA);
+
 	/* Display arbitration control */
 	dev_priv->saveDSPARB = I915_READ(DSPARB);
 
@@ -373,6 +376,9 @@ int i915_restore_state(struct drm_device *dev)
 	if (IS_I965G(dev) && IS_MOBILE(dev))
 		I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
 
+	/* Hardware status page */
+	I915_WRITE(HWS_PGA, dev_priv->saveHWS);
+
 	/* Display arbitration */
 	I915_WRITE(DSPARB, dev_priv->saveDSPARB);
 
diff --git a/drivers/gpu/drm/mga/mga_dma.c b/drivers/gpu/drm/mga/mga_dma.c
index c1d12dbfa8d8..b49c5ff29585 100644
--- a/drivers/gpu/drm/mga/mga_dma.c
+++ b/drivers/gpu/drm/mga/mga_dma.c
@@ -396,6 +396,7 @@ int mga_freelist_put(struct drm_device * dev, struct drm_buf * buf)
 int mga_driver_load(struct drm_device * dev, unsigned long flags)
 {
 	drm_mga_private_t *dev_priv;
+	int ret;
 
 	dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
 	if (!dev_priv)
@@ -415,6 +416,13 @@ int mga_driver_load(struct drm_device * dev, unsigned long flags)
 	dev->types[7] = _DRM_STAT_PRIMARY;
 	dev->types[8] = _DRM_STAT_SECONDARY;
 
+	ret = drm_vblank_init(dev, 1);
+
+	if (ret) {
+		(void) mga_driver_unload(dev);
+		return ret;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/mga/mga_irq.c b/drivers/gpu/drm/mga/mga_irq.c
index bab42f41188b..daa6041a483a 100644
--- a/drivers/gpu/drm/mga/mga_irq.c
+++ b/drivers/gpu/drm/mga/mga_irq.c
@@ -152,11 +152,6 @@ void mga_driver_irq_preinstall(struct drm_device * dev)
 int mga_driver_irq_postinstall(struct drm_device *dev)
 {
 	drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
-	int ret;
-
-	ret = drm_vblank_init(dev, 1);
-	if (ret)
-		return ret;
 
 	DRM_INIT_WAITQUEUE(&dev_priv->fence_queue);
 
diff --git a/drivers/gpu/drm/r128/r128_drv.c b/drivers/gpu/drm/r128/r128_drv.c
index 3265d53ba91f..601f4c0e5da5 100644
--- a/drivers/gpu/drm/r128/r128_drv.c
+++ b/drivers/gpu/drm/r128/r128_drv.c
@@ -45,6 +45,7 @@ static struct drm_driver driver = {
 	    DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG |
 	    DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED,
 	.dev_priv_size = sizeof(drm_r128_buf_priv_t),
+	.load = r128_driver_load,
 	.preclose = r128_driver_preclose,
 	.lastclose = r128_driver_lastclose,
 	.get_vblank_counter = r128_get_vblank_counter,
@@ -84,6 +85,11 @@ static struct drm_driver driver = {
 	.patchlevel = DRIVER_PATCHLEVEL,
 };
 
+int r128_driver_load(struct drm_device * dev, unsigned long flags)
+{
+	return drm_vblank_init(dev, 1);
+}
+
 static int __init r128_init(void)
 {
 	driver.num_ioctls = r128_max_ioctl;
diff --git a/drivers/gpu/drm/r128/r128_drv.h b/drivers/gpu/drm/r128/r128_drv.h
index 5898b274279d..797a26c42dab 100644
--- a/drivers/gpu/drm/r128/r128_drv.h
+++ b/drivers/gpu/drm/r128/r128_drv.h
@@ -159,6 +159,7 @@ extern void r128_driver_irq_preinstall(struct drm_device * dev);
 extern int r128_driver_irq_postinstall(struct drm_device *dev);
 extern void r128_driver_irq_uninstall(struct drm_device * dev);
 extern void r128_driver_lastclose(struct drm_device * dev);
+extern int r128_driver_load(struct drm_device * dev, unsigned long flags);
 extern void r128_driver_preclose(struct drm_device * dev,
 				 struct drm_file *file_priv);
 
diff --git a/drivers/gpu/drm/r128/r128_irq.c b/drivers/gpu/drm/r128/r128_irq.c
index d7349012a680..69810fb8ac49 100644
--- a/drivers/gpu/drm/r128/r128_irq.c
+++ b/drivers/gpu/drm/r128/r128_irq.c
@@ -102,7 +102,7 @@ void r128_driver_irq_preinstall(struct drm_device * dev)
 
 int r128_driver_irq_postinstall(struct drm_device *dev)
 {
-	return drm_vblank_init(dev, 1);
+	return 0;
 }
 
 void r128_driver_irq_uninstall(struct drm_device * dev)
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index abdc1ae38467..dcebb4bee7aa 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -1757,6 +1757,12 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags)
 	if (ret != 0)
 		return ret;
 
+	ret = drm_vblank_init(dev, 2);
+	if (ret) {
+		radeon_driver_unload(dev);
+		return ret;
+	}
+
 	DRM_DEBUG("%s card detected\n",
 		  ((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI"))));
 	return ret;
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 7a183789be97..3bbb871b25d5 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -299,7 +299,6 @@ typedef struct drm_radeon_private {
 	atomic_t swi_emitted;
 	int vblank_crtc;
 	uint32_t irq_enable_reg;
-	int irq_enabled;
 	uint32_t r500_disp_irq_reg;
 
 	struct radeon_surface surfaces[RADEON_MAX_SURFACES];
diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c
index 5079f7054a2f..99be11418ac2 100644
--- a/drivers/gpu/drm/radeon/radeon_irq.c
+++ b/drivers/gpu/drm/radeon/radeon_irq.c
@@ -44,7 +44,8 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state)
 	else
 		dev_priv->irq_enable_reg &= ~mask;
 
-	RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
+	if (!dev->irq_enabled)
+		RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
 }
 
 static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state)
@@ -56,7 +57,8 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state)
 	else
 		dev_priv->r500_disp_irq_reg &= ~mask;
 
-	RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg);
+	if (!dev->irq_enabled)
+		RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg);
 }
 
 int radeon_enable_vblank(struct drm_device *dev, int crtc)
@@ -337,15 +339,10 @@ int radeon_driver_irq_postinstall(struct drm_device *dev)
 {
 	drm_radeon_private_t *dev_priv =
 	    (drm_radeon_private_t *) dev->dev_private;
-	int ret;
 
 	atomic_set(&dev_priv->swi_emitted, 0);
 	DRM_INIT_WAITQUEUE(&dev_priv->swi_queue);
 
-	ret = drm_vblank_init(dev, 2);
-	if (ret)
-		return ret;
-
 	dev->max_vblank_count = 0x001fffff;
 
 	radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1);
@@ -360,8 +357,6 @@ void radeon_driver_irq_uninstall(struct drm_device * dev)
 	if (!dev_priv)
 		return;
 
-	dev_priv->irq_enabled = 0;
-
 	if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690)
 		RADEON_WRITE(R500_DxMODE_INT_MASK, 0);
 	/* Disable *all* interrupts */
diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c
index 665d319b927b..c248c1d37268 100644
--- a/drivers/gpu/drm/via/via_irq.c
+++ b/drivers/gpu/drm/via/via_irq.c
@@ -314,7 +314,6 @@ int via_driver_irq_postinstall(struct drm_device *dev)
 	if (!dev_priv)
 		return -EINVAL;
 
-	drm_vblank_init(dev, 1);
 	status = VIA_READ(VIA_REG_INTERRUPT);
 	VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL
 		  | dev_priv->irq_enable_mask);
diff --git a/drivers/gpu/drm/via/via_map.c b/drivers/gpu/drm/via/via_map.c
index a967556be014..2c4f0b485792 100644
--- a/drivers/gpu/drm/via/via_map.c
+++ b/drivers/gpu/drm/via/via_map.c
@@ -107,8 +107,17 @@ int via_driver_load(struct drm_device *dev, unsigned long chipset)
 	ret = drm_sman_init(&dev_priv->sman, 2, 12, 8);
 	if (ret) {
 		drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
+		return ret;
 	}
-	return ret;
+
+	ret = drm_vblank_init(dev, 1);
+	if (ret) {
+		drm_sman_takedown(&dev_priv->sman);
+		drm_free(dev_priv, sizeof(drm_via_private_t), DRM_MEM_DRIVER);
+		return ret;
+	}
+
+	return 0;
 }
 
 int via_driver_unload(struct drm_device *dev)
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 9b97795e45ad..aa28aed0e46c 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -400,12 +400,12 @@ static const struct hid_device_id apple_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
 			APPLE_RDESC_JIS },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
 			APPLE_ISO_KEYBOARD },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
 		.driver_data = APPLE_HAS_FN },
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 147ec591a806..40df3e1b4bd1 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1241,9 +1241,9 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS) },
@@ -1266,6 +1266,9 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
@@ -1420,7 +1423,6 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
@@ -1436,7 +1438,6 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_SUPER_Q2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_GOGOPEN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_PENPOWER) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GRETAGMACBETH, USB_DEVICE_ID_GRETAGMACBETH_HUEY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB) },
@@ -1576,9 +1577,6 @@ static const struct hid_device_id hid_mouse_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
 	{ }
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index d70075dd3d81..39289699c32f 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -163,6 +163,7 @@
 
 #define USB_VENDOR_ID_GAMERON		0x0810
 #define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR	0x0001
+#define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR	0x0002
 
 #define USB_VENDOR_ID_GENERAL_TOUCH	0x0dfc
 
diff --git a/drivers/hid/hid-pl.c b/drivers/hid/hid-pl.c
index acd815586182..46941f979b9d 100644
--- a/drivers/hid/hid-pl.c
+++ b/drivers/hid/hid-pl.c
@@ -178,6 +178,8 @@ err:
 static const struct hid_device_id pl_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR),
 		.driver_data = 1 }, /* Twin USB Joystick */
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR),
+		.driver_data = 1 }, /* Twin USB Joystick */
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003), }, /* GreenAsia Inc. USB Joystick */
 	{ }
 };
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index d746bf8284dd..606369ea24ca 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -796,7 +796,6 @@ static int usbhid_start(struct hid_device *hid)
 	if (insize > HID_MAX_BUFFER_SIZE)
 		insize = HID_MAX_BUFFER_SIZE;
 
-	mutex_lock(&usbhid->setup);
 	if (hid_alloc_buffers(dev, hid)) {
 		ret = -ENOMEM;
 		goto fail;
@@ -876,7 +875,6 @@ static int usbhid_start(struct hid_device *hid)
 	hid_dump_device(hid);
 
 	set_bit(HID_STARTED, &usbhid->iofl);
-	mutex_unlock(&usbhid->setup);
 
 	return 0;
 
@@ -888,7 +886,6 @@ fail:
 	usbhid->urbout = NULL;
 	usbhid->urbctrl = NULL;
 	hid_free_buffers(dev, hid);
-	mutex_unlock(&usbhid->setup);
 	return ret;
 }
 
@@ -899,7 +896,6 @@ static void usbhid_stop(struct hid_device *hid)
 	if (WARN_ON(!usbhid))
 		return;
 
-	mutex_lock(&usbhid->setup);
 	clear_bit(HID_STARTED, &usbhid->iofl);
 	spin_lock_irq(&usbhid->inlock);	/* Sync with error handler */
 	set_bit(HID_DISCONNECTED, &usbhid->iofl);
@@ -928,7 +924,6 @@ static void usbhid_stop(struct hid_device *hid)
 	usbhid->urbout = NULL;
 
 	hid_free_buffers(hid_to_usb_dev(hid), hid);
-	mutex_unlock(&usbhid->setup);
 }
 
 static struct hid_ll_driver usb_hid_driver = {
@@ -1016,7 +1011,6 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	hid->driver_data = usbhid;
 	usbhid->hid = hid;
-	mutex_init(&usbhid->setup); /* needed on suspend/resume */
 
 	ret = hid_add_device(hid);
 	if (ret) {
@@ -1051,18 +1045,14 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message)
 	struct hid_device *hid = usb_get_intfdata (intf);
 	struct usbhid_device *usbhid = hid->driver_data;
 
-	mutex_lock(&usbhid->setup);
-	if (!test_bit(HID_STARTED, &usbhid->iofl)) {
-		mutex_unlock(&usbhid->setup);
+	if (!test_bit(HID_STARTED, &usbhid->iofl))
 		return 0;
-	}
 
 	spin_lock_irq(&usbhid->inlock);	/* Sync with error handler */
 	set_bit(HID_SUSPENDED, &usbhid->iofl);
 	spin_unlock_irq(&usbhid->inlock);
 	del_timer_sync(&usbhid->io_retry);
 	usb_kill_urb(usbhid->urbin);
-	mutex_unlock(&usbhid->setup);
 	dev_dbg(&intf->dev, "suspend\n");
 	return 0;
 }
@@ -1073,16 +1063,12 @@ static int hid_resume(struct usb_interface *intf)
 	struct usbhid_device *usbhid = hid->driver_data;
 	int status;
 
-	mutex_lock(&usbhid->setup);
-	if (!test_bit(HID_STARTED, &usbhid->iofl)) {
-		mutex_unlock(&usbhid->setup);
+	if (!test_bit(HID_STARTED, &usbhid->iofl))
 		return 0;
-	}
 
 	clear_bit(HID_SUSPENDED, &usbhid->iofl);
 	usbhid->retry_delay = 0;
 	status = hid_start_in(hid);
-	mutex_unlock(&usbhid->setup);
 	dev_dbg(&intf->dev, "resume status %d\n", status);
 	return status;
 }
diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h
index 55973ff54008..332abcdf9956 100644
--- a/drivers/hid/usbhid/usbhid.h
+++ b/drivers/hid/usbhid/usbhid.h
@@ -74,7 +74,6 @@ struct usbhid_device {
 	dma_addr_t outbuf_dma;                                          /* Output buffer dma */
 	spinlock_t outlock;                                             /* Output fifo spinlock */
 
-	struct mutex setup;
 	unsigned long iofl;                                             /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
 	struct timer_list io_retry;                                     /* Retry timer */
 	unsigned long stop_retry;                                       /* Time to give up, in jiffies */
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index f7dce8b9f64b..086c2a5cef0b 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -1564,3 +1564,4 @@ module_exit(applesmc_exit);
 MODULE_AUTHOR("Nicolas Boichat");
 MODULE_DESCRIPTION("Apple SMC");
 MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(dmi, applesmc_whitelist);
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index f4d22ae9d294..e5a8dae4a289 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -92,7 +92,7 @@ static void highlander_i2c_setup(struct highlander_i2c_dev *dev)
 static void smbus_write_data(u8 *src, u16 *dst, int len)
 {
 	for (; len > 1; len -= 2) {
-		*dst++ = be16_to_cpup((u16 *)src);
+		*dst++ = be16_to_cpup((__be16 *)src);
 		src += 2;
 	}
 
@@ -103,7 +103,7 @@ static void smbus_write_data(u8 *src, u16 *dst, int len)
 static void smbus_read_data(u16 *src, u8 *dst, int len)
 {
 	for (; len > 1; len -= 2) {
-		*(u16 *)dst = cpu_to_be16p(src++);
+		*(__be16 *)dst = cpu_to_be16p(src++);
 		dst += 2;
 	}
 
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 59ba2086d2f9..a257cd5cd134 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -189,8 +189,6 @@ static void i2c_parport_attach (struct parport *port)
 	if (adapter_parm[type].init.val)
 		line_set(port, 1, &adapter_parm[type].init);
 
-	parport_release(adapter->pdev);
-
 	if (i2c_bit_add_bus(&adapter->adapter) < 0) {
 		printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
 		goto ERROR1;
@@ -202,6 +200,7 @@ static void i2c_parport_attach (struct parport *port)
         return;
 
 ERROR1:
+	parport_release(adapter->pdev);
 	parport_unregister_device(adapter->pdev);
 ERROR0:
 	kfree(adapter);
@@ -221,6 +220,7 @@ static void i2c_parport_detach (struct parport *port)
 			if (adapter_parm[type].init.val)
 				line_set(port, 0, &adapter_parm[type].init);
 				
+			parport_release(adapter->pdev);
 			parport_unregister_device(adapter->pdev);
 			if (prev)
 				prev->next = adapter->next;
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index dcf2045b5222..0bdb2d7f0570 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -486,7 +486,7 @@ static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd(
 
 	if (cmd->type == MSP_TWI_CMD_WRITE ||
 	    cmd->type == MSP_TWI_CMD_WRITE_READ) {
-		__be64 tmp = cpu_to_be64p((u64 *)cmd->write_data);
+		u64 tmp = be64_to_cpup((__be64 *)cmd->write_data);
 		tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8;
 		dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp);
 		pmcmsptwi_writel(tmp & 0x00000000ffffffffLL,
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 906f9b9d715d..587f5b2380d4 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1016,7 +1016,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u",
 		 i2c->adap.nr);
 
-	i2c->clk = clk_get(&dev->dev, "I2CCLK");
+	i2c->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(i2c->clk)) {
 		ret = PTR_ERR(i2c->clk);
 		goto eclk;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 1fac4e233133..fdebd930408e 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -40,8 +40,8 @@
 #include <asm/io.h>
 
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c/regs-iic.h>
-#include <asm/plat-s3c/iic.h>
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
 
 /* i2c controller state */
 
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 28902ebd5539..e0d56ef2bcb0 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb.h>
@@ -33,7 +34,10 @@
 #include <linux/workqueue.h>
 
 #include <asm/irq.h>
+#include <asm/mach-types.h>
+
 #include <mach/usb.h>
+#include <mach/mux.h>
 
 
 #ifndef	DEBUG
@@ -88,14 +92,9 @@ struct isp1301 {
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef	CONFIG_MACH_OMAP_H2
-
 /* board-specific PM hooks */
 
-#include <asm/gpio.h>
-#include <mach/mux.h>
-#include <asm/mach-types.h>
-
+#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
 
 #if	defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE)
 
@@ -135,6 +134,33 @@ static inline void notresponding(struct isp1301 *isp)
 
 #endif
 
+#if defined(CONFIG_MACH_OMAP_H4)
+
+static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
+{
+	/* H4 controls this by DIP switch S2.4; no soft control.
+	 * ON means the charger is always enabled.  Leave it OFF
+	 * unless the OTG port is used only in B-peripheral mode.
+	 */
+}
+
+static void enable_vbus_source(struct isp1301 *isp)
+{
+	/* this board won't supply more than 8mA vbus power.
+	 * some boards can switch a 100ma "unit load" (or more).
+	 */
+}
+
+
+/* products will deliver OTG messages with LEDs, GUI, etc */
+static inline void notresponding(struct isp1301 *isp)
+{
+	printk(KERN_NOTICE "OTG device not responding.\n");
+}
+
+
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static struct i2c_driver isp1301_driver;
@@ -334,8 +360,7 @@ static int gadget_suspend(struct isp1301 *isp)
  * NOTE: guaranteeing certain response times might mean we shouldn't
  * share keventd's work queue; a realtime task might be safest.
  */
-void
-isp1301_defer_work(struct isp1301 *isp, int work)
+static void isp1301_defer_work(struct isp1301 *isp, int work)
 {
 	int status;
 
@@ -512,7 +537,6 @@ static void update_otg1(struct isp1301 *isp, u8 int_src)
 	otg_ctrl &= ~OTG_XCEIV_INPUTS;
 	otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
 
-
 	if (int_src & INTR_SESS_VLD)
 		otg_ctrl |= OTG_ASESSVLD;
 	else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) {
@@ -886,11 +910,11 @@ static int otg_probe(struct platform_device *dev)
 
 static int otg_remove(struct platform_device *dev)
 {
-	otg_dev = 0;
+	otg_dev = NULL;
 	return 0;
 }
 
-struct platform_driver omap_otg_driver = {
+static struct platform_driver omap_otg_driver = {
 	.probe		= otg_probe,
 	.remove		= otg_remove,
 	.driver		= {
@@ -1212,6 +1236,8 @@ static void isp1301_release(struct device *dev)
 
 	isp = dev_get_drvdata(dev);
 
+	/* FIXME -- not with a "new style" driver, it doesn't!! */
+
 	/* ugly -- i2c hijacks our memory hook to wait_for_completion() */
 	if (isp->i2c_release)
 		isp->i2c_release(dev);
@@ -1233,7 +1259,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c)
 	otg_unbind(isp);
 #endif
 	if (machine_is_omap_h2())
-		omap_free_gpio(2);
+		gpio_free(2);
 
 	isp->timer.data = 0;
 	set_bit(WORK_STOP, &isp->todo);
@@ -1241,7 +1267,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c)
 	flush_scheduled_work();
 
 	put_device(&i2c->dev);
-	the_transceiver = 0;
+	the_transceiver = NULL;
 
 	return 0;
 }
@@ -1295,7 +1321,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host)
 	if (!host) {
 		omap_writew(0, OTG_IRQ_EN);
 		power_down(isp);
-		isp->otg.host = 0;
+		isp->otg.host = NULL;
 		return 0;
 	}
 
@@ -1344,7 +1370,9 @@ static int
 isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
 {
 	struct isp1301	*isp = container_of(otg, struct isp1301, otg);
+#ifndef	CONFIG_USB_OTG
 	u32 l;
+#endif
 
 	if (!otg || isp != the_transceiver)
 		return -ENODEV;
@@ -1354,7 +1382,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
 		if (!isp->otg.default_a)
 			enable_vbus_draw(isp, 0);
 		usb_gadget_vbus_disconnect(isp->otg.gadget);
-		isp->otg.gadget = 0;
+		isp->otg.gadget = NULL;
 		power_down(isp);
 		return 0;
 	}
@@ -1379,7 +1407,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
 	power_up(isp);
 	isp->otg.state = OTG_STATE_B_IDLE;
 
-	if (machine_is_omap_h2())
+	if (machine_is_omap_h2() || machine_is_omap_h3())
 		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
 
 	isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
@@ -1499,7 +1527,8 @@ isp1301_start_hnp(struct otg_transceiver *dev)
 
 /*-------------------------------------------------------------------------*/
 
-static int __init isp1301_probe(struct i2c_client *i2c)
+static int __init
+isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 {
 	int			status;
 	struct isp1301		*isp;
@@ -1647,7 +1676,7 @@ module_init(isp_init);
 static void __exit isp_exit(void)
 {
 	if (the_transceiver)
-		otg_set_transceiver(0);
+		otg_set_transceiver(NULL);
 	i2c_del_driver(&isp1301_driver);
 }
 module_exit(isp_exit);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 5a485c22660a..c6a63f46bc15 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -631,7 +631,7 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 
 	/* detach any active clients. This must be done first, because
 	 * it can fail; in which case we give up. */
-	list_for_each_entry_safe(client, _n, &adap->clients, list) {
+	list_for_each_entry_safe_reverse(client, _n, &adap->clients, list) {
 		struct i2c_driver	*driver;
 
 		driver = client->driver;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 6d7401772a8f..1a00bb7db872 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -669,10 +669,12 @@ config BLK_DEV_CELLEB
 
 endif
 
+# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
 config BLK_DEV_IDE_PMAC
 	tristate "PowerMac on-board IDE support"
 	depends on PPC_PMAC && IDE=y
 	select IDE_TIMINGS
+	select BLK_DEV_IDEDMA_PCI
 	help
 	  This driver provides support for the on-board IDE controller on
 	  most of the recent Apple Power Macintoshes and PowerBooks.
@@ -689,16 +691,6 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
 	  CD-ROM on hda. This option changes this to more natural hda for
 	  hard disk and hdc for CD-ROM.
 
-config BLK_DEV_IDEDMA_PMAC
-	bool "PowerMac IDE DMA support"
-	depends on BLK_DEV_IDE_PMAC
-	select BLK_DEV_IDEDMA_PCI
-	help
-	  This option allows the driver for the on-board IDE controller on
-	  Power Macintoshes and PowerBooks to use DMA (direct memory access)
-	  to transfer data to and from memory.  Saying Y is safe and improves
-	  performance.
-
 config BLK_DEV_IDE_AU1XXX
        bool "IDE for AMD Alchemy Au1200"
        depends on SOC_AU1200
@@ -732,7 +724,7 @@ config BLK_DEV_IDE_TX4939
 
 config IDE_ARM
 	tristate "ARM IDE support"
-	depends on ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
+	depends on ARM && (ARCH_RPC || ARCH_SHARK)
 	default y
 
 config BLK_DEV_IDE_ICSIDE
@@ -912,7 +904,7 @@ config BLK_DEV_UMC8672
 endif
 
 config BLK_DEV_IDEDMA
-	def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
+	def_bool BLK_DEV_IDEDMA_SFF || \
 		 BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 
 endif # IDE
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index e56c7b72f9e2..45d2356bb725 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -591,7 +591,7 @@ static int __init ali15x3_ide_init(void)
 
 static void __exit ali15x3_ide_exit(void)
 {
-	return pci_unregister_driver(&alim15x3_pci_driver);
+	pci_unregister_driver(&alim15x3_pci_driver);
 }
 
 module_init(ali15x3_ide_init);
diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c
index 81ec73134eda..c6bcd3014a29 100644
--- a/drivers/ide/amd74xx.c
+++ b/drivers/ide/amd74xx.c
@@ -3,7 +3,7 @@
  * IDE driver for Linux.
  *
  * Copyright (c) 2000-2002 Vojtech Pavlik
- * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
+ * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz
  *
  * Based on the work of:
  *      Andre Hedrick
@@ -263,6 +263,15 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_
 			d.udma_mask = ATA_UDMA5;
 	}
 
+	/*
+	 * It seems that on some nVidia controllers using AltStatus
+	 * register can be unreliable so default to Status register
+	 * if the device is in Compatibility Mode.
+	 */
+	if (dev->vendor == PCI_VENDOR_ID_NVIDIA &&
+	    ide_pci_is_in_compatibility_mode(dev))
+		d.host_flags |= IDE_HFLAG_BROKEN_ALTSTATUS;
+
 	printk(KERN_INFO "%s %s: UDMA%s controller\n",
 		d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]);
 
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 2d848010499d..81f70caeb40f 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -419,7 +419,7 @@ static void icside_setup_ports(hw_regs_t *hw, void __iomem *base,
 	hw->chipset = ide_acorn;
 }
 
-static int __init
+static int __devinit
 icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 {
 	void __iomem *base;
@@ -473,7 +473,7 @@ static const struct ide_port_info icside_v6_port_info __initdata = {
 	.swdma_mask		= ATA_SWDMA2,
 };
 
-static int __init
+static int __devinit
 icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 {
 	void __iomem *ioc_base, *easi_base;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 7162d67562af..cc35d6dbd410 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -132,10 +132,14 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors)
 }
 EXPORT_SYMBOL(ide_end_request);
 
-static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)
+static void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
 {
 	struct request_pm_state *pm = rq->data;
 
+#ifdef DEBUG_PM
+	printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
+		drive->name, pm->pm_step);
+#endif
 	if (drive->media != ide_disk)
 		return;
 
@@ -172,7 +176,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
 		/* Not supported? Switch to next step now. */
 		if (ata_id_flush_enabled(drive->id) == 0 ||
 		    (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
-			ide_complete_power_step(drive, rq, 0, 0);
+			ide_complete_power_step(drive, rq);
 			return ide_stopped;
 		}
 		if (ata_id_flush_ext_enabled(drive->id))
@@ -191,7 +195,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
 		if (drive->media != ide_disk)
 			pm->pm_step = IDE_PM_RESTORE_DMA;
 		else
-			ide_complete_power_step(drive, rq, 0, 0);
+			ide_complete_power_step(drive, rq);
 		return ide_stopped;
 	case IDE_PM_IDLE:		/* Resume step 2 (idle) */
 		args->tf.command = ATA_CMD_IDLEIMMEDIATE;
@@ -322,11 +326,8 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
 		}
 	} else if (blk_pm_request(rq)) {
 		struct request_pm_state *pm = rq->data;
-#ifdef DEBUG_PM
-		printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n",
-			drive->name, rq->pm->pm_step, stat, err);
-#endif
-		ide_complete_power_step(drive, rq, stat, err);
+
+		ide_complete_power_step(drive, rq);
 		if (pm->pm_step == IDE_PM_COMPLETED)
 			ide_complete_pm_request(drive, rq);
 		return;
@@ -804,7 +805,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
 			struct request_pm_state *pm = rq->data;
 #ifdef DEBUG_PM
 			printk("%s: start_power_step(step: %d)\n",
-				drive->name, rq->pm->pm_step);
+				drive->name, pm->pm_step);
 #endif
 			startstop = ide_start_power_step(drive, rq);
 			if (startstop == ide_stopped &&
@@ -967,14 +968,13 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
 	ide_startstop_t	startstop;
 	int             loops = 0;
 
-	/* for atari only: POSSIBLY BROKEN HERE(?) */
-	ide_get_lock(ide_intr, hwgroup);
-
 	/* caller must own ide_lock */
 	BUG_ON(!irqs_disabled());
 
 	while (!hwgroup->busy) {
 		hwgroup->busy = 1;
+		/* for atari only */
+		ide_get_lock(ide_intr, hwgroup);
 		drive = choose_drive(hwgroup);
 		if (drive == NULL) {
 			int sleeping = 0;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 5d6ba14e211d..c41c3b9b6f02 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -457,18 +457,14 @@ int drive_is_ready (ide_drive_t *drive)
 	if (drive->waiting_for_dma)
 		return hwif->dma_ops->dma_test_irq(drive);
 
-#if 0
-	/* need to guarantee 400ns since last command was issued */
-	udelay(1);
-#endif
-
 	/*
 	 * We do a passive status test under shared PCI interrupts on
 	 * cards that truly share the ATA side interrupt, but may also share
 	 * an interrupt with another pci card/device.  We make no assumptions
 	 * about possible isa-pnp and pci-pnp issues yet.
 	 */
-	if (hwif->io_ports.ctl_addr)
+	if (hwif->io_ports.ctl_addr &&
+	    (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0)
 		stat = hwif->tp_ops->read_altstatus(hwif);
 	else
 		/* Note: this may clear a pending IRQ!! */
@@ -610,6 +606,7 @@ static const struct drive_list_entry ivb_list[] = {
 	{ "TSSTcorp CDDVDW SH-S202N"	, "SB01"	},
 	{ "TSSTcorp CDDVDW SH-S202H"	, "SB00"	},
 	{ "TSSTcorp CDDVDW SH-S202H"	, "SB01"	},
+	{ "SAMSUNG SP0822N"		, "WA100-10"	},
 	{ NULL				, NULL		}
 };
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 1649ea54f76c..c55bdbd22314 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -266,7 +266,8 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 	/* take a deep breath */
 	msleep(50);
 
-	if (io_ports->ctl_addr) {
+	if (io_ports->ctl_addr &&
+	    (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) {
 		a = tp_ops->read_altstatus(hwif);
 		s = tp_ops->read_status(hwif);
 		if ((a ^ s) & ~ATA_IDX)
diff --git a/drivers/ide/ide_arm.c b/drivers/ide/ide_arm.c
index f728f2927b5a..bdcac94d7c1f 100644
--- a/drivers/ide/ide_arm.c
+++ b/drivers/ide/ide_arm.c
@@ -15,15 +15,8 @@
 
 #define DRV_NAME "ide_arm"
 
-#ifdef CONFIG_ARCH_CLPS7500
-# include <mach/hardware.h>
-#
-# define IDE_ARM_IO	(ISASLOT_IO + 0x1f0)
-# define IDE_ARM_IRQ	IRQ_ISA_14
-#else
-# define IDE_ARM_IO	0x1f0
-# define IDE_ARM_IRQ	IRQ_HARDDISK
-#endif
+#define IDE_ARM_IO	0x1f0
+#define IDE_ARM_IRQ	IRQ_HARDDISK
 
 static int __init ide_arm_init(void)
 {
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 2e19d6298536..7c481bb56fab 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -66,7 +66,6 @@ typedef struct pmac_ide_hwif {
 	struct macio_dev		*mdev;
 	u32				timings[4];
 	volatile u32 __iomem *		*kauai_fcr;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 	/* Those fields are duplicating what is in hwif. We currently
 	 * can't use the hwif ones because of some assumptions that are
 	 * beeing done by the generic code about the kind of dma controller
@@ -74,8 +73,6 @@ typedef struct pmac_ide_hwif {
 	 */
 	volatile struct dbdma_regs __iomem *	dma_regs;
 	struct dbdma_cmd*		dma_table_cpu;
-#endif
-	
 } pmac_ide_hwif_t;
 
 enum {
@@ -222,8 +219,6 @@ static const char* model_name[] = {
 #define KAUAI_FCR_UATA_RESET_N		0x00000002
 #define KAUAI_FCR_UATA_ENABLE		0x00000001
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
 /* Rounded Multiword DMA timings
  * 
  * I gave up finding a generic formula for all controller
@@ -413,8 +408,6 @@ static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
 static void pmac_ide_selectproc(ide_drive_t *drive);
 static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
 
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-
 #define PMAC_IDE_REG(x) \
 	((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
 
@@ -584,8 +577,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	pmac_ide_do_update_timings(drive);
 }
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
 /*
  * Calculate KeyLargo ATA/66 UDMA timings
  */
@@ -786,7 +777,6 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
 		drive->name, speed & 0xf,  *timings);
 #endif	
 }
-#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
 
 static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
@@ -804,7 +794,6 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	tl[0] = *timings;
 	tl[1] = *timings2;
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 	if (speed >= XFER_UDMA_0) {
 		if (pmif->kind == controller_kl_ata4)
 			ret = set_timings_udma_ata4(&tl[0], speed);
@@ -817,7 +806,7 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
 			ret = -1;
 	} else
 		set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
 	if (ret)
 		return;
 
@@ -1008,9 +997,7 @@ static const struct ide_port_info pmac_port_info = {
 	.chipset		= ide_pmac,
 	.tp_ops			= &pmac_tp_ops,
 	.port_ops		= &pmac_ide_port_ops,
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 	.dma_ops		= &pmac_dma_ops,
-#endif
 	.host_flags		= IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
 				  IDE_HFLAG_POST_SET_MODE |
 				  IDE_HFLAG_MMIO |
@@ -1182,7 +1169,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
 	pmif->regbase = regbase;
 	pmif->irq = irq;
 	pmif->kauai_fcr = NULL;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+
 	if (macio_resource_count(mdev) >= 2) {
 		if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
 			printk(KERN_WARNING "ide-pmac: can't request DMA "
@@ -1192,7 +1179,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
 			pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
 	} else
 		pmif->dma_regs = NULL;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
 	dev_set_drvdata(&mdev->ofdev.dev, pmif);
 
 	memset(&hw, 0, sizeof(hw));
@@ -1300,9 +1287,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	base = ioremap(rbase, rlen);
 	pmif->regbase = (unsigned long) base + 0x2000;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
 	pmif->dma_regs = base + 0x1000;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
 	pmif->kauai_fcr = base;
 	pmif->irq = pdev->irq;
 
@@ -1434,8 +1419,6 @@ out:
 	return error;
 }
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
 /*
  * pmac_ide_build_dmatable builds the DBDMA command list
  * for a transfer and sets the DBDMA channel to point to it.
@@ -1723,13 +1706,6 @@ static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
 
 	return 0;
 }
-#else
-static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
-				       const struct ide_port_info *d)
-{
-	return -EOPNOTSUPP;
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
 
 module_init(pmac_ide_probe);
 
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c
index 7defa0ae2014..a687a7dfea6f 100644
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -550,7 +550,7 @@ static const struct ide_dma_ops sgiioc4_dma_ops = {
 	.dma_timeout		= ide_dma_timeout,
 };
 
-static const struct ide_port_info sgiioc4_port_info __devinitdata = {
+static const struct ide_port_info sgiioc4_port_info __devinitconst = {
 	.name			= DRV_NAME,
 	.chipset		= ide_pci,
 	.init_dma		= ide_dma_sgiioc4,
@@ -633,7 +633,7 @@ out:
 	return ret;
 }
 
-int
+int __devinit
 ioc4_ide_attach_one(struct ioc4_driver_data *idd)
 {
 	/* PCI-RT does not bring out IDE connection.
@@ -645,7 +645,7 @@ ioc4_ide_attach_one(struct ioc4_driver_data *idd)
 	return pci_init_sgiioc4(idd->idd_pdev);
 }
 
-static struct ioc4_submodule ioc4_ide_submodule = {
+static struct ioc4_submodule __devinitdata ioc4_ide_submodule = {
 	.is_name = "IOC4_ide",
 	.is_owner = THIS_MODULE,
 	.is_probe = ioc4_ide_attach_one,
diff --git a/drivers/ieee1394/highlevel.c b/drivers/ieee1394/highlevel.c
index 918ffc4fc8ac..272543a42a43 100644
--- a/drivers/ieee1394/highlevel.c
+++ b/drivers/ieee1394/highlevel.c
@@ -46,10 +46,6 @@ static DEFINE_RWLOCK(hl_irqs_lock);
 
 static DEFINE_RWLOCK(addr_space_lock);
 
-/* addr_space list will have zero and max already included as bounds */
-static struct hpsb_address_ops dummy_ops = { NULL, NULL, NULL, NULL };
-static struct hpsb_address_serve dummy_zero_addr, dummy_max_addr;
-
 
 static struct hl_host_info *hl_get_hostinfo(struct hpsb_highlevel *hl,
 					    struct hpsb_host *host)
@@ -481,20 +477,23 @@ int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
 	return retval;
 }
 
+static struct hpsb_address_ops dummy_ops;
+
+/* dummy address spaces as lower and upper bounds of the host's a.s. list */
 static void init_hpsb_highlevel(struct hpsb_host *host)
 {
-	INIT_LIST_HEAD(&dummy_zero_addr.host_list);
-	INIT_LIST_HEAD(&dummy_zero_addr.hl_list);
-	INIT_LIST_HEAD(&dummy_max_addr.host_list);
-	INIT_LIST_HEAD(&dummy_max_addr.hl_list);
+	INIT_LIST_HEAD(&host->dummy_zero_addr.host_list);
+	INIT_LIST_HEAD(&host->dummy_zero_addr.hl_list);
+	INIT_LIST_HEAD(&host->dummy_max_addr.host_list);
+	INIT_LIST_HEAD(&host->dummy_max_addr.hl_list);
 
-	dummy_zero_addr.op = dummy_max_addr.op = &dummy_ops;
+	host->dummy_zero_addr.op = host->dummy_max_addr.op = &dummy_ops;
 
-	dummy_zero_addr.start = dummy_zero_addr.end = 0;
-	dummy_max_addr.start = dummy_max_addr.end = ((u64) 1) << 48;
+	host->dummy_zero_addr.start = host->dummy_zero_addr.end = 0;
+	host->dummy_max_addr.start = host->dummy_max_addr.end = ((u64) 1) << 48;
 
-	list_add_tail(&dummy_zero_addr.host_list, &host->addr_space);
-	list_add_tail(&dummy_max_addr.host_list, &host->addr_space);
+	list_add_tail(&host->dummy_zero_addr.host_list, &host->addr_space);
+	list_add_tail(&host->dummy_max_addr.host_list, &host->addr_space);
 }
 
 void highlevel_add_host(struct hpsb_host *host)
diff --git a/drivers/ieee1394/hosts.h b/drivers/ieee1394/hosts.h
index e4e8aeb4d778..dd229950acca 100644
--- a/drivers/ieee1394/hosts.h
+++ b/drivers/ieee1394/hosts.h
@@ -13,6 +13,7 @@ struct module;
 
 #include "ieee1394_types.h"
 #include "csr.h"
+#include "highlevel.h"
 
 struct hpsb_packet;
 struct hpsb_iso;
@@ -72,6 +73,9 @@ struct hpsb_host {
 	struct { DECLARE_BITMAP(map, 64); } tl_pool[ALL_NODES];
 
 	struct csr_control csr;
+
+	struct hpsb_address_serve dummy_zero_addr;
+	struct hpsb_address_serve dummy_max_addr;
 };
 
 enum devctl_cmd {
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 9e39f73282ee..d333ae22459c 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -1685,6 +1685,7 @@ static int nodemgr_host_thread(void *data)
 		g = get_hpsb_generation(host);
 		for (i = 0; i < 4 ; i++) {
 			msleep_interruptible(63);
+			try_to_freeze();
 			if (kthread_should_stop())
 				goto exit;
 
@@ -1725,6 +1726,7 @@ static int nodemgr_host_thread(void *data)
 		/* Sleep 3 seconds */
 		for (i = 3000/200; i; i--) {
 			msleep_interruptible(200);
+			try_to_freeze();
 			if (kthread_should_stop())
 				goto exit;
 
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index c52f6e6e8af2..a373c18cf7b8 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -402,6 +402,11 @@ static const struct {
 	},
 	/* iPod mini */ {
 		.firmware_revision	= 0x0a2700,
+		.model_id		= 0x000022,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	},
+	/* iPod mini */ {
+		.firmware_revision	= 0x0a2700,
 		.model_id		= 0x000023,
 		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
 	},
@@ -890,12 +895,13 @@ static void sbp2_host_reset(struct hpsb_host *host)
 		return;
 
 	read_lock_irqsave(&sbp2_hi_logical_units_lock, flags);
+
 	list_for_each_entry(lu, &hi->logical_units, lu_list)
-		if (likely(atomic_read(&lu->state) !=
-			   SBP2LU_STATE_IN_SHUTDOWN)) {
-			atomic_set(&lu->state, SBP2LU_STATE_IN_RESET);
+		if (atomic_cmpxchg(&lu->state,
+				   SBP2LU_STATE_RUNNING, SBP2LU_STATE_IN_RESET)
+		    == SBP2LU_STATE_RUNNING)
 			scsi_block_requests(lu->shost);
-		}
+
 	read_unlock_irqrestore(&sbp2_hi_logical_units_lock, flags);
 }
 
diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h
index 4df887af66a5..7fc35cf0cddf 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes.h
@@ -163,7 +163,8 @@ struct ehca_mod_qp_parm {
 /* struct for tracking if cqes have been reported to the application */
 struct ehca_qmap_entry {
 	u16 app_wr_id;
-	u16 reported;
+	u8 reported;
+	u8 cqe_req;
 };
 
 struct ehca_queue_map {
@@ -171,6 +172,7 @@ struct ehca_queue_map {
 	unsigned int entries;
 	unsigned int tail;
 	unsigned int left_to_poll;
+	unsigned int next_wqe_idx;   /* Idx to first wqe to be flushed */
 };
 
 struct ehca_qp {
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index bb02a86aa526..bec7e0249358 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -994,8 +994,7 @@ static int ehca_mem_notifier(struct notifier_block *nb,
 			if (printk_timed_ratelimit(&ehca_dmem_warn_time,
 						   30 * 1000))
 				ehca_gen_err("DMEM operations are not allowed"
-					     "as long as an ehca adapter is"
-					     "attached to the LPAR");
+					     "in conjunction with eHCA");
 			return NOTIFY_BAD;
 		}
 	}
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index 9e05ee2db39b..cadbf0cdd910 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -435,9 +435,13 @@ static void reset_queue_map(struct ehca_queue_map *qmap)
 {
 	int i;
 
-	qmap->tail = 0;
-	for (i = 0; i < qmap->entries; i++)
+	qmap->tail = qmap->entries - 1;
+	qmap->left_to_poll = 0;
+	qmap->next_wqe_idx = 0;
+	for (i = 0; i < qmap->entries; i++) {
 		qmap->map[i].reported = 1;
+		qmap->map[i].cqe_req = 0;
+	}
 }
 
 /*
@@ -1121,6 +1125,7 @@ static int calc_left_cqes(u64 wqe_p, struct ipz_queue *ipz_queue,
 	void *wqe_v;
 	u64 q_ofs;
 	u32 wqe_idx;
+	unsigned int tail_idx;
 
 	/* convert real to abs address */
 	wqe_p = wqe_p & (~(1UL << 63));
@@ -1133,12 +1138,17 @@ static int calc_left_cqes(u64 wqe_p, struct ipz_queue *ipz_queue,
 		return -EFAULT;
 	}
 
+	tail_idx = (qmap->tail + 1) % qmap->entries;
 	wqe_idx = q_ofs / ipz_queue->qe_size;
-	if (wqe_idx < qmap->tail)
-		qmap->left_to_poll = (qmap->entries - qmap->tail) + wqe_idx;
-	else
-		qmap->left_to_poll = wqe_idx - qmap->tail;
 
+	/* check all processed wqes, whether a cqe is requested or not */
+	while (tail_idx != wqe_idx) {
+		if (qmap->map[tail_idx].cqe_req)
+			qmap->left_to_poll++;
+		tail_idx = (tail_idx + 1) % qmap->entries;
+	}
+	/* save index in queue, where we have to start flushing */
+	qmap->next_wqe_idx = wqe_idx;
 	return 0;
 }
 
@@ -1185,10 +1195,14 @@ static int check_for_left_cqes(struct ehca_qp *my_qp, struct ehca_shca *shca)
 	} else {
 		spin_lock_irqsave(&my_qp->send_cq->spinlock, flags);
 		my_qp->sq_map.left_to_poll = 0;
+		my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) %
+						my_qp->sq_map.entries;
 		spin_unlock_irqrestore(&my_qp->send_cq->spinlock, flags);
 
 		spin_lock_irqsave(&my_qp->recv_cq->spinlock, flags);
 		my_qp->rq_map.left_to_poll = 0;
+		my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) %
+						my_qp->rq_map.entries;
 		spin_unlock_irqrestore(&my_qp->recv_cq->spinlock, flags);
 	}
 
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index 64928079eafa..00a648f4316c 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -179,6 +179,7 @@ static inline int ehca_write_swqe(struct ehca_qp *qp,
 
 	qmap_entry->app_wr_id = get_app_wr_id(send_wr->wr_id);
 	qmap_entry->reported = 0;
+	qmap_entry->cqe_req = 0;
 
 	switch (send_wr->opcode) {
 	case IB_WR_SEND:
@@ -203,8 +204,10 @@ static inline int ehca_write_swqe(struct ehca_qp *qp,
 
 	if ((send_wr->send_flags & IB_SEND_SIGNALED ||
 	    qp->init_attr.sq_sig_type == IB_SIGNAL_ALL_WR)
-	    && !hidden)
+	    && !hidden) {
 		wqe_p->wr_flag |= WQE_WRFLAG_REQ_SIGNAL_COM;
+		qmap_entry->cqe_req = 1;
+	}
 
 	if (send_wr->opcode == IB_WR_SEND_WITH_IMM ||
 	    send_wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM) {
@@ -569,6 +572,7 @@ static int internal_post_recv(struct ehca_qp *my_qp,
 		qmap_entry = &my_qp->rq_map.map[rq_map_idx];
 		qmap_entry->app_wr_id = get_app_wr_id(cur_recv_wr->wr_id);
 		qmap_entry->reported = 0;
+		qmap_entry->cqe_req = 1;
 
 		wqe_cnt++;
 	} /* eof for cur_recv_wr */
@@ -706,27 +710,34 @@ repoll:
 		goto repoll;
 	wc->qp = &my_qp->ib_qp;
 
+	qmap_tail_idx = get_app_wr_id(cqe->work_request_id);
+	if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT))
+		/* We got a send completion. */
+		qmap = &my_qp->sq_map;
+	else
+		/* We got a receive completion. */
+		qmap = &my_qp->rq_map;
+
+	/* advance the tail pointer */
+	qmap->tail = qmap_tail_idx;
+
 	if (is_error) {
 		/*
 		 * set left_to_poll to 0 because in error state, we will not
 		 * get any additional CQEs
 		 */
-		ehca_add_to_err_list(my_qp, 1);
+		my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) %
+						my_qp->sq_map.entries;
 		my_qp->sq_map.left_to_poll = 0;
+		ehca_add_to_err_list(my_qp, 1);
 
+		my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) %
+						my_qp->rq_map.entries;
+		my_qp->rq_map.left_to_poll = 0;
 		if (HAS_RQ(my_qp))
 			ehca_add_to_err_list(my_qp, 0);
-		my_qp->rq_map.left_to_poll = 0;
 	}
 
-	qmap_tail_idx = get_app_wr_id(cqe->work_request_id);
-	if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT))
-		/* We got a send completion. */
-		qmap = &my_qp->sq_map;
-	else
-		/* We got a receive completion. */
-		qmap = &my_qp->rq_map;
-
 	qmap_entry = &qmap->map[qmap_tail_idx];
 	if (qmap_entry->reported) {
 		ehca_warn(cq->device, "Double cqe on qp_num=%#x",
@@ -738,10 +749,6 @@ repoll:
 	wc->wr_id = replace_wr_id(cqe->work_request_id, qmap_entry->app_wr_id);
 	qmap_entry->reported = 1;
 
-	/* this is a proper completion, we need to advance the tail pointer */
-	if (++qmap->tail == qmap->entries)
-		qmap->tail = 0;
-
 	/* if left_to_poll is decremented to 0, add the QP to the error list */
 	if (qmap->left_to_poll > 0) {
 		qmap->left_to_poll--;
@@ -805,13 +812,14 @@ static int generate_flush_cqes(struct ehca_qp *my_qp, struct ib_cq *cq,
 	else
 		qmap = &my_qp->rq_map;
 
-	qmap_entry = &qmap->map[qmap->tail];
+	qmap_entry = &qmap->map[qmap->next_wqe_idx];
 
 	while ((nr < num_entries) && (qmap_entry->reported == 0)) {
 		/* generate flush CQE */
+
 		memset(wc, 0, sizeof(*wc));
 
-		offset = qmap->tail * ipz_queue->qe_size;
+		offset = qmap->next_wqe_idx * ipz_queue->qe_size;
 		wqe = (struct ehca_wqe *)ipz_qeit_calc(ipz_queue, offset);
 		if (!wqe) {
 			ehca_err(cq->device, "Invalid wqe offset=%#lx on "
@@ -850,11 +858,12 @@ static int generate_flush_cqes(struct ehca_qp *my_qp, struct ib_cq *cq,
 
 		wc->qp = &my_qp->ib_qp;
 
-		/* mark as reported and advance tail pointer */
+		/* mark as reported and advance next_wqe pointer */
 		qmap_entry->reported = 1;
-		if (++qmap->tail == qmap->entries)
-			qmap->tail = 0;
-		qmap_entry = &qmap->map[qmap->tail];
+		qmap->next_wqe_idx++;
+		if (qmap->next_wqe_idx == qmap->entries)
+			qmap->next_wqe_idx = 0;
+		qmap_entry = &qmap->map[qmap->next_wqe_idx];
 
 		wc++; nr++;
 	}
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index d0866a3636e2..18308494a195 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -343,6 +343,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
 {
 	struct mlx4_ib_dev *dev = to_mdev(ibcq->device);
 	struct mlx4_ib_cq *cq = to_mcq(ibcq);
+	struct mlx4_mtt mtt;
 	int outst_cqe;
 	int err;
 
@@ -376,10 +377,13 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
 			goto out;
 	}
 
+	mtt = cq->buf.mtt;
+
 	err = mlx4_cq_resize(dev->dev, &cq->mcq, entries, &cq->resize_buf->buf.mtt);
 	if (err)
 		goto err_buf;
 
+	mlx4_mtt_cleanup(dev->dev, &mtt);
 	if (ibcq->uobject) {
 		cq->buf      = cq->resize_buf->buf;
 		cq->ibcq.cqe = cq->resize_buf->cqe;
@@ -406,6 +410,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
 	goto out;
 
 err_buf:
+	mlx4_mtt_cleanup(dev->dev, &cq->resize_buf->buf.mtt);
 	if (!ibcq->uobject)
 		mlx4_ib_free_cq_buf(dev, &cq->resize_buf->buf,
 				    cq->resize_buf->cqe);
diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c
index 6790e975a98c..bc4e40f3ede7 100644
--- a/drivers/input/ff-memless.c
+++ b/drivers/input/ff-memless.c
@@ -397,8 +397,9 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value)
 {
 	struct ml_device *ml = dev->ff->private;
 	struct ml_effect_state *state = &ml->states[effect_id];
+	unsigned long flags;
 
-	spin_lock_bh(&ml->timer_lock);
+	spin_lock_irqsave(&ml->timer_lock, flags);
 
 	if (value > 0) {
 		debug("initiated play");
@@ -424,7 +425,7 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value)
 		ml_play_effects(ml);
 	}
 
-	spin_unlock_bh(&ml->timer_lock);
+	spin_unlock_irqrestore(&ml->timer_lock, flags);
 
 	return 0;
 }
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 22016ca15351..379b7ff354ec 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -824,7 +824,7 @@ static void atkbd_disconnect(struct serio *serio)
 	atkbd_disable(atkbd);
 
 	/* make sure we don't have a command in flight */
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&atkbd->event_work);
 
 	sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
 	input_unregister_device(atkbd->dev);
@@ -868,6 +868,22 @@ static void atkbd_hp_keymap_fixup(struct atkbd *atkbd)
 }
 
 /*
+ * Inventec system with broken key release on volume keys
+ */
+static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd)
+{
+	const unsigned int forced_release_keys[] = {
+		0xae, 0xb0,
+	};
+	int i;
+
+	if (atkbd->set == 2)
+		for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
+			__set_bit(forced_release_keys[i],
+				  atkbd->force_release_mask);
+}
+
+/*
  * atkbd_set_keycode_table() initializes keyboard's keycode table
  * according to the selected scancode set
  */
@@ -1468,6 +1484,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.callback = atkbd_setup_fixup,
 		.driver_data = atkbd_hp_keymap_fixup,
 	},
+	{
+		.ident = "Inventec Symphony",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
+		},
+		.callback = atkbd_setup_fixup,
+		.driver_data = atkbd_inventec_keymap_fixup,
+	},
 	{ }
 };
 
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 69e674ecf19a..db22fd9b4cf2 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -101,7 +101,7 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
 	if (cpu_is_omap24xx()) {
 		int i;
 		for (i = 0; i < omap_kp->rows; i++)
-			disable_irq(OMAP_GPIO_IRQ(row_gpios[i]));
+			disable_irq(gpio_to_irq(row_gpios[i]));
 	} else
 		/* disable keyboard interrupt and schedule for handling */
 		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
@@ -224,7 +224,7 @@ static void omap_kp_tasklet(unsigned long data)
 		if (cpu_is_omap24xx()) {
 			int i;
 			for (i = 0; i < omap_kp_data->rows; i++)
-				enable_irq(OMAP_GPIO_IRQ(row_gpios[i]));
+				enable_irq(gpio_to_irq(row_gpios[i]));
 		} else {
 			omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 			kp_cur_group = -1;
@@ -397,7 +397,7 @@ static int __init omap_kp_probe(struct platform_device *pdev)
 		omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 	} else {
 		for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) {
-			if (request_irq(OMAP_GPIO_IRQ(row_gpios[irq_idx]),
+			if (request_irq(gpio_to_irq(row_gpios[irq_idx]),
 					omap_kp_interrupt,
 					IRQF_TRIGGER_FALLING,
 					"omap-keypad", omap_kp) < 0)
@@ -438,7 +438,7 @@ static int omap_kp_remove(struct platform_device *pdev)
 			gpio_free(col_gpios[i]);
 		for (i = 0; i < omap_kp->rows; i++) {
 			gpio_free(row_gpios[i]);
-			free_irq(OMAP_GPIO_IRQ(row_gpios[i]), 0);
+			free_irq(gpio_to_irq(row_gpios[i]), 0);
 		}
 	} else {
 		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 6d30c6d334c3..0d2fc64a5e1c 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -475,7 +475,7 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev)
 		goto failed_free_mem;
 	}
 
-	keypad->clk = clk_get(&pdev->dev, "KBDCLK");
+	keypad->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(keypad->clk)) {
 		dev_err(&pdev->dev, "failed to get keypad clock\n");
 		error = PTR_ERR(keypad->clk);
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index bce160f4349b..86457feccfc4 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -42,7 +42,7 @@
 
 static char *phone = "kip1000";
 module_param(phone, charp, S_IRUSR);
-MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}");
+MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
 
 enum {
 	/* HID Registers */
@@ -258,6 +258,37 @@ static unsigned short keymap_usbph01(int scancode)
 	}
 }
 
+/*
+ * Keymap for ATCom AU-100
+ * http://www.atcom.cn/En_products_AU100.html
+ * http://www.packetizer.com/products/au100/
+ * http://www.voip-info.org/wiki/view/AU-100
+ *
+ * Contributed by daniel@gimpelevich.san-francisco.ca.us
+ */
+static unsigned short keymap_atcom(int scancode)
+{
+	switch (scancode) {				/* phone key:   */
+	case 0x82: return KEY_NUMERIC_0;		/*   0          */
+	case 0x11: return KEY_NUMERIC_1;		/*   1          */
+	case 0x12: return KEY_NUMERIC_2;		/*   2          */
+	case 0x14: return KEY_NUMERIC_3;		/*   3          */
+	case 0x21: return KEY_NUMERIC_4;		/*   4          */
+	case 0x22: return KEY_NUMERIC_5;		/*   5          */
+	case 0x24: return KEY_NUMERIC_6;		/*   6          */
+	case 0x41: return KEY_NUMERIC_7;		/*   7          */
+	case 0x42: return KEY_NUMERIC_8;		/*   8          */
+	case 0x44: return KEY_NUMERIC_9;		/*   9          */
+	case 0x84: return KEY_NUMERIC_POUND;		/*   #          */
+	case 0x81: return KEY_NUMERIC_STAR;		/*   *          */
+	case 0x18: return KEY_ENTER;			/*   pickup     */
+	case 0x28: return KEY_ESC;			/*   hangup     */
+	case 0x48: return KEY_LEFT;			/* left arrow   */
+	case 0x88: return KEY_RIGHT;			/* right arrow  */
+	default:   return special_keymap(scancode);
+	}
+}
+
 static unsigned short (*keymap)(int) = keymap_kip1000;
 
 /*
@@ -840,6 +871,10 @@ static int __init cm109_select_keymap(void)
 		keymap = keymap_usbph01;
 		printk(KERN_INFO KBUILD_MODNAME ": "
 			"Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
+	} else if (!strcasecmp(phone, "atcom")) {
+		keymap = keymap_atcom;
+		printk(KERN_INFO KBUILD_MODNAME ": "
+			"Keymap for ATCom AU-100 phone loaded\n");
 	} else {
 		printk(KERN_ERR KBUILD_MODNAME ": "
 			"Unsupported phone: %s\n", phone);
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index e82d34201e97..88f04bf2ad6c 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -125,7 +125,7 @@ static void hgpk_spewing_hack(struct psmouse *psmouse,
  */
 static int hgpk_validate_byte(unsigned char *packet)
 {
-	return (packet[0] & 0x0C) == 0x08;
+	return (packet[0] & 0x0C) != 0x08;
 }
 
 static void hgpk_process_packet(struct psmouse *psmouse)
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 27d70d326ff3..da3c3a5d2689 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -79,7 +79,7 @@ config SERIO_PARKBD
 
 config SERIO_RPCKBD
 	tristate "Acorn RiscPC keyboard controller"
-	depends on ARCH_ACORN || ARCH_CLPS7500
+	depends on ARCH_ACORN
 	default y
 	help
 	  Say Y here if you have the Acorn RiscPC and want to use an AT
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index eec375cd10e6..29e686388a2c 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -337,6 +337,20 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
 		},
 	},
+	{
+		.ident = "Dell XPS M1530",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
+		},
+	},
+	{
+		.ident = "Compal HEL80I",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index ca62ec639f8f..677680e9f54f 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -66,6 +66,7 @@
  *		   - Support Intuos3 4x6
  *      v1.47 (pc) - Added support for Bamboo
  *      v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
+ *      v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
  */
 
 /*
@@ -86,7 +87,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.48"
+#define DRIVER_VERSION "v1.49"
 #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
 #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
 #define DRIVER_LICENSE "GPL"
@@ -103,15 +104,15 @@ struct wacom {
 	struct usb_device *usbdev;
 	struct usb_interface *intf;
 	struct urb *irq;
-	struct wacom_wac * wacom_wac;
+	struct wacom_wac *wacom_wac;
 	struct mutex lock;
 	unsigned int open:1;
 	char phys[32];
 };
 
 struct wacom_combo {
-	struct wacom * wacom;
-	struct urb * urb;
+	struct wacom *wacom;
+	struct urb *urb;
 };
 
 extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
@@ -132,7 +133,7 @@ extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wa
 extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
 extern __u16 wacom_le16_to_cpu(unsigned char *data);
 extern __u16 wacom_be16_to_cpu(unsigned char *data);
-extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
-extern const struct usb_device_id * get_device_table(void);
+extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id);
+extern const struct usb_device_id *get_device_table(void);
 
 #endif
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 09e227aa0d49..484496daa0f3 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -14,8 +14,41 @@
 #include "wacom.h"
 #include "wacom_wac.h"
 
+/* defines to get HID report descriptor */
+#define HID_DEVICET_HID		(USB_TYPE_CLASS | 0x01)
+#define HID_DEVICET_REPORT	(USB_TYPE_CLASS | 0x02)
+#define HID_USAGE_UNDEFINED		0x00
+#define HID_USAGE_PAGE			0x05
+#define HID_USAGE_PAGE_DIGITIZER	0x0d
+#define HID_USAGE_PAGE_DESKTOP		0x01
+#define HID_USAGE			0x09
+#define HID_USAGE_X			0x30
+#define HID_USAGE_Y			0x31
+#define HID_USAGE_X_TILT		0x3d
+#define HID_USAGE_Y_TILT		0x3e
+#define HID_USAGE_FINGER		0x22
+#define HID_USAGE_STYLUS		0x20
+#define HID_COLLECTION			0xc0
+
+enum {
+	WCM_UNDEFINED = 0,
+	WCM_DESKTOP,
+	WCM_DIGITIZER,
+};
+
+struct hid_descriptor {
+	struct usb_descriptor_header header;
+	__le16   bcdHID;
+	u8       bCountryCode;
+	u8       bNumDescriptors;
+	u8       bDescriptorType;
+	__le16   wDescriptorLength;
+} __attribute__ ((packed));
+
+/* defines to get/set USB message */
 #define USB_REQ_GET_REPORT	0x01
 #define USB_REQ_SET_REPORT	0x09
+#define WAC_HID_FEATURE_REPORT	0x03
 
 static int usb_get_report(struct usb_interface *intf, unsigned char type,
 				unsigned char id, void *buf, int size)
@@ -80,25 +113,21 @@ static void wacom_sys_irq(struct urb *urb)
 void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
 {
 	input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
-	return;
 }
 
 void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
 {
 	input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
-	return;
 }
 
 void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
 {
 	input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
-	return;
 }
 
 void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
 {
 	input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
-	return;
 }
 
 __u16 wacom_be16_to_cpu(unsigned char *data)
@@ -118,7 +147,6 @@ __u16 wacom_le16_to_cpu(unsigned char *data)
 void wacom_input_sync(void *wcombo)
 {
 	input_sync(get_input_dev((struct wacom_combo *)wcombo));
-	return;
 }
 
 static int wacom_open(struct input_dev *dev)
@@ -160,7 +188,7 @@ static void wacom_close(struct input_dev *dev)
 
 void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
-	input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) |
+	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) |
 		BIT_MASK(BTN_5);
 	input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
 }
@@ -170,7 +198,7 @@ void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 	input_dev->evbit[0] |= BIT_MASK(EV_MSC);
 	input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
 	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
-	input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
 		BIT_MASK(BTN_4);
 }
 
@@ -178,7 +206,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
 	input_dev->evbit[0] |= BIT_MASK(EV_REL);
 	input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
-	input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+	input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
 		BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
 	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
 		BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
@@ -188,7 +216,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
 	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
-	input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
 		BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
 	input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
 	input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
@@ -196,14 +224,14 @@ void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 
 void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
-	input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) |
+	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) |
 		BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7);
 	input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
 }
 
 void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
-	input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
+	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
 }
 
 void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
@@ -211,7 +239,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 	input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL);
 	input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
 	input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
-	input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+	input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
 		BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) |
 		BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
 	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
@@ -228,8 +256,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 
 void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
-	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) |
-		BIT_MASK(BTN_TOOL_RUBBER);
+	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2);
 }
 
 void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
@@ -237,15 +264,129 @@ void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER);
 }
 
+static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
+			   struct wacom_wac *wacom_wac)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct wacom_features *features = wacom_wac->features;
+	char limit = 0, result = 0;
+	int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
+	unsigned char *report;
+
+	report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
+	if (!report)
+		return -ENOMEM;
+
+	/* retrive report descriptors */
+	do {
+		result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			USB_REQ_GET_DESCRIPTOR,
+			USB_RECIP_INTERFACE | USB_DIR_IN,
+			HID_DEVICET_REPORT << 8,
+			intf->altsetting[0].desc.bInterfaceNumber, /* interface */
+			report,
+			hid_desc->wDescriptorLength,
+			5000); /* 5 secs */
+	} while (result < 0 && limit++ < 5);
+
+	if (result < 0)
+		goto out;
+
+	for (i = 0; i < hid_desc->wDescriptorLength; i++) {
+
+		switch (report[i]) {
+		case HID_USAGE_PAGE:
+			switch (report[i + 1]) {
+			case HID_USAGE_PAGE_DIGITIZER:
+				usage = WCM_DIGITIZER;
+				i++;
+				break;
+
+			case HID_USAGE_PAGE_DESKTOP:
+				usage = WCM_DESKTOP;
+				i++;
+				break;
+			}
+			break;
+
+		case HID_USAGE:
+			switch (report[i + 1]) {
+			case HID_USAGE_X:
+				if (usage == WCM_DESKTOP) {
+					if (finger) {
+						features->touch_x_max =
+							features->touch_y_max =
+							wacom_le16_to_cpu(&report[i + 3]);
+						features->x_max =
+							wacom_le16_to_cpu(&report[i + 6]);
+						i += 7;
+					} else if (pen) {
+						features->x_max =
+							wacom_le16_to_cpu(&report[i + 3]);
+						i += 4;
+					}
+				} else if (usage == WCM_DIGITIZER) {
+					/* max pressure isn't reported
+					features->pressure_max = (unsigned short)
+							(report[i+4] << 8  | report[i + 3]);
+					*/
+					features->pressure_max = 255;
+					i += 4;
+				}
+				break;
+
+			case HID_USAGE_Y:
+				if (usage == WCM_DESKTOP)
+					features->y_max =
+						wacom_le16_to_cpu(&report[i + 3]);
+				i += 4;
+				break;
+
+			case HID_USAGE_FINGER:
+				finger = 1;
+				i++;
+				break;
+
+			case HID_USAGE_STYLUS:
+				pen = 1;
+				i++;
+				break;
+
+			case HID_USAGE_UNDEFINED:
+				if (usage == WCM_DESKTOP && finger) /* capacity */
+					features->pressure_max =
+						wacom_le16_to_cpu(&report[i + 3]);
+				i += 4;
+				break;
+			}
+			break;
+
+		case HID_COLLECTION:
+			/* reset UsagePage ans Finger */
+			finger = usage = 0;
+			break;
+		}
+	}
+
+	result = 0;
+
+ out:
+	kfree(report);
+	return result;
+}
+
 static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
 	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_host_interface *interface = intf->cur_altsetting;
 	struct usb_endpoint_descriptor *endpoint;
 	struct wacom *wacom;
 	struct wacom_wac *wacom_wac;
+	struct wacom_features *features;
 	struct input_dev *input_dev;
 	int error = -ENOMEM;
 	char rep_data[2], limit = 0;
+	struct hid_descriptor *hid_desc;
 
 	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
 	wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
@@ -268,8 +409,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
 	strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
 
-	wacom_wac->features = get_wacom_feature(id);
-	BUG_ON(wacom_wac->features->pktlen > 10);
+	wacom_wac->features = features = get_wacom_feature(id);
+	BUG_ON(features->pktlen > 10);
 
 	input_dev->name = wacom_wac->features->name;
 	wacom->wacom_wac = wacom_wac;
@@ -282,18 +423,37 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	input_dev->open = wacom_open;
 	input_dev->close = wacom_close;
 
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+	/* TabletPC need to retrieve the physical and logical maximum from report descriptor */
+	if (wacom_wac->features->type == TABLETPC) {
+		if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
+			if (usb_get_extra_descriptor(&interface->endpoint[0],
+						     HID_DEVICET_REPORT, &hid_desc)) {
+				printk("wacom: can not retrive extra class descriptor\n");
+				goto fail2;
+			}
+		}
+		error = wacom_parse_hid(intf, hid_desc, wacom_wac);
+		if (error)
+			goto fail2;
+	}
+
 	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
 		BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS);
-	input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
-	input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
+	input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
+	if (features->type == TABLETPC) {
+		input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP);
+		input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0);
+		input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0);
+	}
 	input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
 
 	wacom_init_input_dev(input_dev, wacom_wac);
 
-	endpoint = &intf->cur_altsetting->endpoint[0].desc;
-
 	usb_fill_int_urb(wacom->irq, dev,
 			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
 			 wacom_wac->data, wacom_wac->features->pktlen,
@@ -305,13 +465,22 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	if (error)
 		goto fail3;
 
-	/* Ask the tablet to report tablet data. Repeat until it succeeds */
-	do {
-		rep_data[0] = 2;
-		rep_data[1] = 2;
-		usb_set_report(intf, 3, 2, rep_data, 2);
-		usb_get_report(intf, 3, 2, rep_data, 2);
-	} while (rep_data[1] != 2 && limit++ < 5);
+	/*
+	 * Ask the tablet to report tablet data if it is not a Tablet PC.
+	 * Repeat until it succeeds
+	 */
+	if (wacom_wac->features->type != TABLETPC) {
+		do {
+			rep_data[0] = 2;
+			rep_data[1] = 2;
+			error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
+						2, rep_data, 2);
+			if (error >= 0)
+				error = usb_get_report(intf,
+						WAC_HID_FEATURE_REPORT, 2,
+						rep_data, 2);
+		} while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+	}
 
 	usb_set_intfdata(intf, wacom);
 	return 0;
@@ -333,7 +502,8 @@ static void wacom_disconnect(struct usb_interface *intf)
 	usb_kill_urb(wacom->irq);
 	input_unregister_device(wacom->dev);
 	usb_free_urb(wacom->irq);
-	usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
+	usb_buffer_free(interface_to_usbdev(intf), 10,
+			wacom->wacom_wac->data, wacom->data_dma);
 	kfree(wacom->wacom_wac);
 	kfree(wacom);
 }
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index bf3d9a8b2c1b..8dc8d1e59bea 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -535,31 +535,147 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 	return 1;
 }
 
+int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
+{
+	char *data = wacom->data;
+	int prox = 0, pressure;
+	static int stylusInProx, touchInProx = 1, touchOut;
+	struct urb *urb = ((struct wacom_combo *)wcombo)->urb;
+
+	dbg("wacom_tpc_irq: received report #%d", data[0]);
+
+	if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */
+		if (urb->actual_length == 5) {  /* with touch */
+			prox = data[0] & 0x03;
+		} else {  /* with capacity */
+			prox = data[1] & 0x03;
+		}
+
+		if (!stylusInProx) { /* stylus not in prox */
+			if (prox) {
+				if (touchInProx) {
+					wacom->tool[1] = BTN_TOOL_DOUBLETAP;
+					wacom->id[0] = TOUCH_DEVICE_ID;
+					if (urb->actual_length != 5) {
+						wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+						wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+						wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
+						wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6]));
+					} else {
+						wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+						wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+						wacom_report_key(wcombo, BTN_TOUCH, 1);
+					}
+					wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+					wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+					touchOut = 1;
+					return 1;
+				}
+			} else {
+				wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+				wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+				wacom_report_key(wcombo, BTN_TOUCH, 0);
+				touchOut = 0;
+				touchInProx = 1;
+				return 1;
+			}
+		} else if (touchOut || !prox) { /* force touch out-prox */
+			wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID);
+			wacom_report_key(wcombo, BTN_TOUCH, 0);
+			touchOut = 0;
+			touchInProx = 1;
+			return 1;
+		}
+	} else if (data[0] == 2) { /* Penabled */
+		prox = data[1] & 0x20;
+
+		touchInProx = 0;
+
+		wacom->id[0] = ERASER_DEVICE_ID;
+
+		/*
+		 * if going from out of proximity into proximity select between the eraser
+		 * and the pen based on the state of the stylus2 button, choose eraser if
+		 * pressed else choose pen. if not a proximity change from out to in, send
+		 * an out of proximity for previous tool then a in for new tool.
+		 */
+		if (prox) { /* in prox */
+			if (!wacom->tool[0]) {
+				/* Going into proximity select tool */
+				wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+				if (wacom->tool[1] == BTN_TOOL_PEN)
+					wacom->id[0] = STYLUS_DEVICE_ID;
+			} else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) {
+				/*
+				 * was entered with stylus2 pressed
+				 * report out proximity for previous tool
+				*/
+				wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+				wacom_report_key(wcombo, wacom->tool[1], 0);
+				wacom_input_sync(wcombo);
+
+				/* set new tool */
+				wacom->tool[1] = BTN_TOOL_PEN;
+				wacom->id[0] = STYLUS_DEVICE_ID;
+				return 0;
+			}
+			if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+				/* Unknown tool selected default to pen tool */
+				wacom->tool[1] = BTN_TOOL_PEN;
+				wacom->id[0] = STYLUS_DEVICE_ID;
+			}
+			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+			wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+			wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+			pressure = ((data[7] & 0x01) << 8) | data[6];
+			if (pressure < 0)
+				pressure = wacom->features->pressure_max + pressure + 1;
+			wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+			wacom_report_key(wcombo, BTN_TOUCH, pressure);
+		} else {
+			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+			wacom_report_key(wcombo, BTN_STYLUS, 0);
+			wacom_report_key(wcombo, BTN_STYLUS2, 0);
+			wacom_report_key(wcombo, BTN_TOUCH, 0);
+		}
+		wacom_report_key(wcombo, wacom->tool[1], prox);
+		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+		stylusInProx = prox;
+		wacom->tool[0] = prox;
+		return 1;
+	}
+	return 0;
+}
+
 int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
 {
 	switch (wacom_wac->features->type) {
 		case PENPARTNER:
-			return (wacom_penpartner_irq(wacom_wac, wcombo));
-			break;
+			return wacom_penpartner_irq(wacom_wac, wcombo);
+
 		case PL:
-			return (wacom_pl_irq(wacom_wac, wcombo));
-			break;
+			return wacom_pl_irq(wacom_wac, wcombo);
+
 		case WACOM_G4:
 		case GRAPHIRE:
 		case WACOM_MO:
-			return (wacom_graphire_irq(wacom_wac, wcombo));
-			break;
+			return wacom_graphire_irq(wacom_wac, wcombo);
+
 		case PTU:
-			return (wacom_ptu_irq(wacom_wac, wcombo));
-			break;
+			return wacom_ptu_irq(wacom_wac, wcombo);
+
 		case INTUOS:
 		case INTUOS3S:
 		case INTUOS3:
 		case INTUOS3L:
 		case CINTIQ:
 		case WACOM_BEE:
-			return (wacom_intuos_irq(wacom_wac, wcombo));
-			break;
+			return wacom_intuos_irq(wacom_wac, wcombo);
+
+		case TABLETPC:
+			return wacom_tpc_irq(wacom_wac, wcombo);
+
 		default:
 			return 0;
 	}
@@ -586,13 +702,15 @@ void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_w
 			/* fall through */
 		case INTUOS3S:
 			input_dev_i3s(input_dev, wacom_wac);
+			/* fall through */
 		case INTUOS:
 			input_dev_i(input_dev, wacom_wac);
 			break;
 		case PL:
 		case PTU:
+		case TABLETPC:
 			input_dev_pl(input_dev, wacom_wac);
-			break;
+			/* fall through */
 		case PENPARTNER:
 			input_dev_pt(input_dev, wacom_wac);
 			break;
@@ -611,6 +729,7 @@ static struct wacom_features wacom_features[] = {
 	{ "Wacom Graphire4 6x8", 8,  16704, 12064,  511, 63, WACOM_G4 },
 	{ "Wacom BambooFun 4x5", 9,  14760,  9225,  511, 63, WACOM_MO },
 	{ "Wacom BambooFun 6x8", 9,  21648, 13530,  511, 63, WACOM_MO },
+	{ "Wacom Bamboo1 Medium",8,  16704, 12064,  511, 63, GRAPHIRE },
 	{ "Wacom Volito",        8,   5104,  3712,  511, 63, GRAPHIRE },
 	{ "Wacom PenStation2",   8,   3250,  2320,  255, 63, GRAPHIRE },
 	{ "Wacom Volito2 4x5",   8,   5104,  3712,  511, 63, GRAPHIRE },
@@ -650,6 +769,10 @@ static struct wacom_features wacom_features[] = {
 	{ "Wacom Cintiq 21UX",   10, 87200, 65600, 1023, 63, CINTIQ },
 	{ "Wacom Cintiq 20WSX",  10, 86680, 54180, 1023, 63, WACOM_BEE },
 	{ "Wacom Cintiq 12WX",   10, 53020, 33440, 1023, 63, WACOM_BEE },
+	{ "Wacom DTU1931",        8, 37832, 30305,  511,  0, PL },
+	{ "Wacom ISDv4 90",       8, 26202, 16325,  255,  0, TABLETPC },
+	{ "Wacom ISDv4 93",       8, 26202, 16325,  255,  0, TABLETPC },
+	{ "Wacom ISDv4 9A",       8, 26202, 16325,  255,  0, TABLETPC },
 	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 31, INTUOS },
 	{ }
 };
@@ -665,6 +788,7 @@ static struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
@@ -704,18 +828,26 @@ static struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
 	{ }
 };
 
-const struct usb_device_id * get_device_table(void) {
-        const struct usb_device_id * id_table = wacom_ids;
+const struct usb_device_id *get_device_table(void)
+{
+        const struct usb_device_id *id_table = wacom_ids;
+
         return id_table;
 }
 
-struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
+struct wacom_features * get_wacom_feature(const struct usb_device_id *id)
+{
         int index = id - wacom_ids;
         struct wacom_features *wf = &wacom_features[index];
+
         return wf;
 }
 
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 3342bc05847d..f9c8b69673b7 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -10,6 +10,7 @@
 #define WACOM_WAC_H
 
 #define STYLUS_DEVICE_ID	0x02
+#define TOUCH_DEVICE_ID		0x03
 #define CURSOR_DEVICE_ID	0x06
 #define ERASER_DEVICE_ID	0x0A
 #define PAD_DEVICE_ID		0x0F
@@ -27,6 +28,7 @@ enum {
 	CINTIQ,
 	WACOM_BEE,
 	WACOM_MO,
+	TABLETPC,
 	MAX_TYPE
 };
 
@@ -38,6 +40,8 @@ struct wacom_features {
 	int pressure_max;
 	int distance_max;
 	int type;
+	int touch_x_max;
+	int touch_y_max;
 };
 
 struct wacom_wac {
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index d20689cdbd5d..8f38c5e55ce6 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -262,7 +262,7 @@ static int elo_setup_10(struct elo *elo)
 		input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
 
 	printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
-		"features: %x02x, controller: 0x%02x\n",
+		"features: 0x%02x, controller: 0x%02x\n",
 		elo_types[(packet[1] -'0') & 0x03],
 		packet[5], packet[4], packet[3], packet[7]);
 
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c
index 3ab6362f043c..928d2ed8865f 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/xen-kbdfront.c
@@ -323,7 +323,7 @@ static struct xenbus_device_id xenkbd_ids[] = {
 	{ "" }
 };
 
-static struct xenbus_driver xenkbd = {
+static struct xenbus_driver xenkbd_driver = {
 	.name = "vkbd",
 	.owner = THIS_MODULE,
 	.ids = xenkbd_ids,
@@ -342,12 +342,12 @@ static int __init xenkbd_init(void)
 	if (xen_initial_domain())
 		return -ENODEV;
 
-	return xenbus_register_frontend(&xenkbd);
+	return xenbus_register_frontend(&xenkbd_driver);
 }
 
 static void __exit xenkbd_cleanup(void)
 {
-	xenbus_unregister_driver(&xenkbd);
+	xenbus_unregister_driver(&xenkbd_driver);
 }
 
 module_init(xenkbd_init);
diff --git a/drivers/isdn/hardware/avm/b1isa.c b/drivers/isdn/hardware/avm/b1isa.c
index 1e288eeb5e2a..6461a32bc838 100644
--- a/drivers/isdn/hardware/avm/b1isa.c
+++ b/drivers/isdn/hardware/avm/b1isa.c
@@ -233,10 +233,8 @@ static void __exit b1isa_exit(void)
 	int i;
 
 	for (i = 0; i < MAX_CARDS; i++) {
-		if (!io[i])
-			break;
-
-		b1isa_remove(&isa_dev[i]);
+		if (isa_dev[i].resource[0].start)
+			b1isa_remove(&isa_dev[i]);
 	}
 	unregister_capi_driver(&capi_driver_b1isa);
 }
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index 84d75a3f5d17..ded9d0baf607 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -1213,7 +1213,7 @@ static void HiSax_shiftcards(int idx)
 		memcpy(&cards[i], &cards[i + 1], sizeof(cards[i]));
 }
 
-static int HiSax_inithardware(int *busy_flag)
+static int __init HiSax_inithardware(int *busy_flag)
 {
 	int foundcards = 0;
 	int i = 0;
@@ -1542,7 +1542,9 @@ static void __exit HiSax_exit(void)
 	printk(KERN_INFO "HiSax module removed\n");
 }
 
-int hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
+#ifdef CONFIG_HOTPLUG
+
+int __devinit hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
 {
 	u_char ids[16];
 	int ret = -1;
@@ -1563,6 +1565,8 @@ error:
 }
 
 EXPORT_SYMBOL(hisax_init_pcmcia);
+#endif
+
 EXPORT_SYMBOL(HiSax_closecard);
 
 #include "hisax_if.h"
@@ -1580,6 +1584,11 @@ static void hisax_bc_close(struct BCState *bcs);
 static void hisax_bh(struct work_struct *work);
 static void EChannel_proc_rcv(struct hisax_d_if *d_if);
 
+static int hisax_setup_card_dynamic(struct IsdnCard *card)
+{
+	return 2;
+}
+
 int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[],
 		   char *name, int protocol)
 {
@@ -1599,7 +1608,8 @@ int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[],
 	cards[i].protocol = protocol;
 	sprintf(id, "%s%d", name, i);
 	nrcards++;
-	retval = checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card);
+	retval = checkcard(i, id, NULL, hisax_d_if->owner,
+				hisax_setup_card_dynamic);
 	if (retval == 0) { // yuck
 		cards[i].typ = 0;
 		nrcards--;
diff --git a/drivers/isdn/hysdn/hysdn_net.c b/drivers/isdn/hysdn/hysdn_net.c
index cfa8fa5e44ab..3f2a0a20c19b 100644
--- a/drivers/isdn/hysdn/hysdn_net.c
+++ b/drivers/isdn/hysdn/hysdn_net.c
@@ -83,12 +83,12 @@ net_open(struct net_device *dev)
 
 	/* Fill in the MAC-level header (if not already set) */
 	if (!card->mac_addr[0]) {
-		for (i = 0; i < ETH_ALEN - sizeof(unsigned long); i++)
+		for (i = 0; i < ETH_ALEN; i++)
 			dev->dev_addr[i] = 0xfc;
 		if ((in_dev = dev->ip_ptr) != NULL) {
 			struct in_ifaddr *ifa = in_dev->ifa_list;
 			if (ifa != NULL)
-				memcpy(dev->dev_addr + (ETH_ALEN - sizeof(unsigned long)), &ifa->ifa_local, sizeof(unsigned long));
+				memcpy(dev->dev_addr + (ETH_ALEN - sizeof(ifa->ifa_local)), &ifa->ifa_local, sizeof(ifa->ifa_local));
 		}
 	} else
 		memcpy(dev->dev_addr, card->mac_addr, ETH_ALEN);
diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c
index 2c21d4f25cc8..a98ab72adf95 100644
--- a/drivers/macintosh/rack-meter.c
+++ b/drivers/macintosh/rack-meter.c
@@ -288,7 +288,7 @@ static void __devexit rackmeter_stop_cpu_sniffer(struct rackmeter *rm)
 	cancel_rearming_delayed_work(&rm->cpu[1].sniffer);
 }
 
-static int rackmeter_setup(struct rackmeter *rm)
+static int __devinit rackmeter_setup(struct rackmeter *rm)
 {
 	pr_debug("rackmeter: setting up i2s..\n");
 	rackmeter_setup_i2s(rm);
@@ -582,12 +582,12 @@ static struct of_device_id rackmeter_match[] = {
 	{ }
 };
 
-static struct macio_driver rackmeter_drv = {
+static struct macio_driver rackmeter_driver = {
 	.name = "rackmeter",
 	.owner = THIS_MODULE,
 	.match_table = rackmeter_match,
 	.probe = rackmeter_probe,
-	.remove = rackmeter_remove,
+	.remove = __devexit_p(rackmeter_remove),
 	.shutdown = rackmeter_shutdown,
 };
 
@@ -596,14 +596,14 @@ static int __init rackmeter_init(void)
 {
 	pr_debug("rackmeter_init()\n");
 
-	return macio_register_driver(&rackmeter_drv);
+	return macio_register_driver(&rackmeter_driver);
 }
 
 static void __exit rackmeter_exit(void)
 {
 	pr_debug("rackmeter_exit()\n");
 
-	macio_unregister_driver(&rackmeter_drv);
+	macio_unregister_driver(&rackmeter_driver);
 }
 
 module_init(rackmeter_init);
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index a63161aec487..04e5fd742c2c 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -668,7 +668,7 @@ static void check_for_valid_limits(struct io_restrictions *rs)
 	if (!rs->max_segment_size)
 		rs->max_segment_size = MAX_SEGMENT_SIZE;
 	if (!rs->seg_boundary_mask)
-		rs->seg_boundary_mask = -1;
+		rs->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
 	if (!rs->bounce_pfn)
 		rs->bounce_pfn = -1;
 }
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index 14e627ef6465..c1d92f838ca8 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -376,7 +376,7 @@ static void dm1105dvb_dma_unmap(struct dm1105dvb *dm1105dvb)
 	pci_free_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, dm1105dvb->ts_buf, dm1105dvb->dma_addr);
 }
 
-static void __devinit dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb)
+static void dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb)
 {
 	outb(INTMAK_ALLMASK, dm_io_mem(DM1105_INTMAK));
 	outb(1, dm_io_mem(DM1105_CR));
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 8557bf12cfb4..7a421e9dba5a 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -585,6 +585,8 @@ restart:
 		if (fe->ops.set_voltage)
 			fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF);
 		if (fe->ops.tuner_ops.sleep) {
+			if (fe->ops.i2c_gate_ctrl)
+				fe->ops.i2c_gate_ctrl(fe, 1);
 			fe->ops.tuner_ops.sleep(fe);
 			if (fe->ops.i2c_gate_ctrl)
 				fe->ops.i2c_gate_ctrl(fe, 0);
@@ -934,7 +936,8 @@ void dtv_property_dump(struct dtv_property *tvp)
 int is_legacy_delivery_system(fe_delivery_system_t s)
 {
 	if((s == SYS_UNDEFINED) || (s == SYS_DVBC_ANNEX_AC) ||
-		(s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS))
+	   (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS) ||
+	   (s == SYS_ATSC))
 		return 1;
 
 	return 0;
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 847d8fdd9ec4..e9ab0249d133 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -681,12 +681,6 @@ static int af9015_download_firmware(struct usb_device *udev,
 		goto error;
 	}
 
-	/* firmware is running, reconnect device in the usb bus */
-	req.cmd = RECONNECT_USB;
-	ret = af9015_rw_udev(udev, &req);
-	if (ret)
-		err("reconnect failed: %d", ret);
-
 error:
 	return ret;
 }
@@ -1208,6 +1202,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 		.usb_ctrl = DEVICE_SPECIFIC,
 		.download_firmware = af9015_download_firmware,
 		.firmware = "dvb-usb-af9015.fw",
+		.no_reconnect = 1,
 
 		.size_of_priv = sizeof(struct af9015_state), \
 
@@ -1306,6 +1301,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 		.usb_ctrl = DEVICE_SPECIFIC,
 		.download_firmware = af9015_download_firmware,
 		.firmware = "dvb-usb-af9015.fw",
+		.no_reconnect = 1,
 
 		.size_of_priv = sizeof(struct af9015_state), \
 
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index 739193943c17..8b544fe79b0d 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -22,7 +22,7 @@ extern int dvb_usb_dib0700_debug;
 
 #define REQUEST_I2C_READ     0x2
 #define REQUEST_I2C_WRITE    0x3
-#define REQUEST_POLL_RC      0x4
+#define REQUEST_POLL_RC      0x4 /* deprecated in firmware v1.20 */
 #define REQUEST_JUMPRAM      0x8
 #define REQUEST_SET_CLOCK    0xB
 #define REQUEST_SET_GPIO     0xC
@@ -40,11 +40,14 @@ struct dib0700_state {
 	u16 mt2060_if1[2];
 	u8 rc_toggle;
 	u8 rc_counter;
+	u8 rc_func_version;
 	u8 is_dib7000pc;
 	u8 fw_use_new_i2c_api;
 	u8 disable_streaming_master_mode;
 };
 
+extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+			       u32 *romversion, u32 *ramversion, u32 *fwtype);
 extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
 extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
 extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen);
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index dd53cee3896d..200b215f4d8b 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -19,6 +19,22 @@ MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5 (defau
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
+
+int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+			u32 *romversion, u32 *ramversion, u32 *fwtype)
+{
+	u8 b[16];
+	int ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+				  REQUEST_GET_VERSION,
+				  USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+				  b, sizeof(b), USB_CTRL_GET_TIMEOUT);
+	*hwversion  = (b[0] << 24)  | (b[1] << 16)  | (b[2] << 8)  | b[3];
+	*romversion = (b[4] << 24)  | (b[5] << 16)  | (b[6] << 8)  | b[7];
+	*ramversion = (b[8] << 24)  | (b[9] << 16)  | (b[10] << 8) | b[11];
+	*fwtype     = (b[12] << 24) | (b[13] << 16) | (b[14] << 8) | b[15];
+	return ret;
+}
+
 /* expecting rx buffer: request data[0] data[1] ... data[2] */
 static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
 {
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 0cfccc24b190..f28d3ae59e04 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -38,6 +38,7 @@ static struct mt2060_config bristol_mt2060_config[2] = {
 	}
 };
 
+
 static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
 	.band_caps = BAND_VHF | BAND_UHF,
 	.setup     = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
@@ -451,8 +452,13 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
 
 /* Number of keypresses to ignore before start repeating */
 #define RC_REPEAT_DELAY 2
+#define RC_REPEAT_DELAY_V1_20 5
 
-static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+
+
+/* Used by firmware versions < 1.20 (deprecated) */
+static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
+				   int *state)
 {
 	u8 key[4];
 	int i;
@@ -529,6 +535,137 @@ static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	return 0;
 }
 
+/* This is the structure of the RC response packet starting in firmware 1.20 */
+struct dib0700_rc_response {
+	u8 report_id;
+	u8 data_state;
+	u8 system_msb;
+	u8 system_lsb;
+	u8 data;
+	u8 not_data;
+};
+
+/* This supports the new IR response format for firmware v1.20 */
+static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
+				  int *state)
+{
+	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	struct dib0700_state *st = d->priv;
+	struct dib0700_rc_response poll_reply;
+	u8 buf[6];
+	int i;
+	int status;
+	int actlen;
+	int found = 0;
+
+	/* Set initial results in case we exit the function early */
+	*event = 0;
+	*state = REMOTE_NO_KEY_PRESSED;
+
+	/* Firmware v1.20 provides RC data via bulk endpoint 1 */
+	status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf,
+			      sizeof(buf), &actlen, 50);
+	if (status < 0) {
+		/* No data available (meaning no key press) */
+		return 0;
+	}
+
+	if (actlen != sizeof(buf)) {
+		/* We didn't get back the 6 byte message we expected */
+		err("Unexpected RC response size [%d]", actlen);
+		return -1;
+	}
+
+	poll_reply.report_id  = buf[0];
+	poll_reply.data_state = buf[1];
+	poll_reply.system_msb = buf[2];
+	poll_reply.system_lsb = buf[3];
+	poll_reply.data       = buf[4];
+	poll_reply.not_data   = buf[5];
+
+	/*
+	info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n",
+	     poll_reply.report_id, poll_reply.data_state,
+	     poll_reply.system_msb, poll_reply.system_lsb,
+	     poll_reply.data, poll_reply.not_data);
+	*/
+
+	if ((poll_reply.data + poll_reply.not_data) != 0xff) {
+		/* Key failed integrity check */
+		err("key failed integrity check: %02x %02x %02x %02x",
+		    poll_reply.system_msb, poll_reply.system_lsb,
+		    poll_reply.data, poll_reply.not_data);
+		return -1;
+	}
+
+	/* Find the key in the map */
+	for (i = 0; i < d->props.rc_key_map_size; i++) {
+		if (keymap[i].custom == poll_reply.system_lsb &&
+		    keymap[i].data == poll_reply.data) {
+			*event = keymap[i].event;
+			found = 1;
+			break;
+		}
+	}
+
+	if (found == 0) {
+		err("Unknown remote controller key: %02x %02x %02x %02x",
+		    poll_reply.system_msb, poll_reply.system_lsb,
+		    poll_reply.data, poll_reply.not_data);
+		d->last_event = 0;
+		return 0;
+	}
+
+	if (poll_reply.data_state == 1) {
+		/* New key hit */
+		st->rc_counter = 0;
+		*event = keymap[i].event;
+		*state = REMOTE_KEY_PRESSED;
+		d->last_event = keymap[i].event;
+	} else if (poll_reply.data_state == 2) {
+		/* Key repeated */
+		st->rc_counter++;
+
+		/* prevents unwanted double hits */
+		if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
+			*event = d->last_event;
+			*state = REMOTE_KEY_PRESSED;
+			st->rc_counter = RC_REPEAT_DELAY_V1_20;
+		}
+	} else {
+		err("Unknown data state [%d]", poll_reply.data_state);
+	}
+
+	return 0;
+}
+
+static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+	struct dib0700_state *st = d->priv;
+
+	/* Because some people may have improperly named firmware files,
+	   let's figure out whether to use the new firmware call or the legacy
+	   call based on the firmware version embedded in the file */
+	if (st->rc_func_version == 0) {
+		u32 hwver, romver, ramver, fwtype;
+		int ret = dib0700_get_version(d, &hwver, &romver, &ramver,
+					      &fwtype);
+		if (ret < 0) {
+			err("Could not determine version info");
+			return -1;
+		}
+		if (ramver < 0x10200)
+			st->rc_func_version = 1;
+		else
+			st->rc_func_version = 2;
+	}
+
+	if (st->rc_func_version == 2)
+		return dib0700_rc_query_v1_20(d, event, state);
+	else
+		return dib0700_rc_query_legacy(d, event, state);
+}
+
 static struct dvb_usb_rc_key dib0700_rc_keys[] = {
 	/* Key codes for the tiny Pinnacle remote*/
 	{ 0x07, 0x00, KEY_MUTE },
diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c
index 397f51a7b2ad..da93b9e982c0 100644
--- a/drivers/media/dvb/dvb-usb/usb-urb.c
+++ b/drivers/media/dvb/dvb-usb/usb-urb.c
@@ -135,7 +135,7 @@ stream->buf_list[stream->buf_num], (long long)stream->dma_addr[stream->buf_num])
 
 static int usb_bulk_urb_init(struct usb_data_stream *stream)
 {
-	int i;
+	int i, j;
 
 	if ((i = usb_allocate_stream_buffers(stream,stream->props.count,
 					stream->props.u.bulk.buffersize)) < 0)
@@ -143,9 +143,13 @@ static int usb_bulk_urb_init(struct usb_data_stream *stream)
 
 	/* allocate the URBs */
 	for (i = 0; i < stream->props.count; i++) {
-		if ((stream->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC)) == NULL)
+		stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
+		if (!stream->urb_list[i]) {
+			deb_mem("not enough memory for urb_alloc_urb!.\n");
+			for (j = 0; j < i; j++)
+				usb_free_urb(stream->urb_list[i]);
 			return -ENOMEM;
-
+		}
 		usb_fill_bulk_urb( stream->urb_list[i], stream->udev,
 				usb_rcvbulkpipe(stream->udev,stream->props.endpoint),
 				stream->buf_list[i],
@@ -170,9 +174,14 @@ static int usb_isoc_urb_init(struct usb_data_stream *stream)
 	for (i = 0; i < stream->props.count; i++) {
 		struct urb *urb;
 		int frame_offset = 0;
-		if ((stream->urb_list[i] =
-					usb_alloc_urb(stream->props.u.isoc.framesperurb,GFP_ATOMIC)) == NULL)
+
+		stream->urb_list[i] = usb_alloc_urb(stream->props.u.isoc.framesperurb, GFP_ATOMIC);
+		if (!stream->urb_list[i]) {
+			deb_mem("not enough memory for urb_alloc_urb!\n");
+			for (j = 0; j < i; j++)
+				usb_free_urb(stream->urb_list[i]);
 			return -ENOMEM;
+		}
 
 		urb = stream->urb_list[i];
 
diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index 6f9b77360440..e98d6caf2c23 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -95,7 +95,7 @@ static struct sms_board sms_boards[] = {
 	[SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = {
 		.name	= "Hauppauge WinTV MiniStick",
 		.type	= SMS_NOVA_B0,
-		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-01.fw",
+		.fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
 	},
 };
 
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 66ab0c6e9783..4a3f2b8ea37d 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -808,6 +808,12 @@ static int ttusb_alloc_iso_urbs(struct ttusb *ttusb)
 						 ISO_BUF_COUNT,
 						 &ttusb->iso_dma_handle);
 
+	if (!ttusb->iso_buffer) {
+		dprintk("%s: pci_alloc_consistent - not enough memory\n",
+			__func__);
+		return -ENOMEM;
+	}
+
 	memset(ttusb->iso_buffer, 0,
 	       ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF * ISO_BUF_COUNT);
 
@@ -1659,7 +1665,14 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	ttusb_setup_interfaces(ttusb);
 
-	ttusb_alloc_iso_urbs(ttusb);
+	result = ttusb_alloc_iso_urbs(ttusb);
+	if (result < 0) {
+		dprintk("%s: ttusb_alloc_iso_urbs - failed\n", __func__);
+		mutex_unlock(&ttusb->semi2c);
+		kfree(ttusb);
+		return result;
+	}
+
 	if (ttusb_init_controller(ttusb))
 		printk("ttusb_init_controller: error\n");
 
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index ab33fec8a19f..0aa96df80fc2 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -1157,6 +1157,12 @@ static int ttusb_dec_alloc_iso_urbs(struct ttusb_dec *dec)
 						ISO_BUF_COUNT),
 					       &dec->iso_dma_handle);
 
+	if (!dec->iso_buffer) {
+		dprintk("%s: pci_alloc_consistent - not enough memory\n",
+			__func__);
+		return -ENOMEM;
+	}
+
 	memset(dec->iso_buffer, 0,
 	       ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * ISO_BUF_COUNT));
 
@@ -1254,6 +1260,7 @@ static int ttusb_dec_init_usb(struct ttusb_dec *dec)
 		dec->irq_buffer = usb_buffer_alloc(dec->udev,IRQ_PACKET_SIZE,
 					GFP_ATOMIC, &dec->irq_dma_handle);
 		if(!dec->irq_buffer) {
+			usb_free_urb(dec->irq_urb);
 			return -ENOMEM;
 		}
 		usb_fill_int_urb(dec->irq_urb, dec->udev,dec->irq_pipe,
diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index ac3292d7646c..7a8d49ef646e 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -62,7 +62,7 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev)
 
 	dprintk("Stopping isoc\n");
 	for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
-		usb_kill_urb(dev->adev->urb[i]);
+		usb_unlink_urb(dev->adev->urb[i]);
 		usb_free_urb(dev->adev->urb[i]);
 		dev->adev->urb[i] = NULL;
 	}
@@ -75,7 +75,6 @@ static void em28xx_audio_isocirq(struct urb *urb)
 	struct em28xx            *dev = urb->context;
 	int                      i;
 	unsigned int             oldptr;
-	unsigned long            flags;
 	int                      period_elapsed = 0;
 	int                      status;
 	unsigned char            *cp;
@@ -96,9 +95,21 @@ static void em28xx_audio_isocirq(struct urb *urb)
 			if (!length)
 				continue;
 
-			spin_lock_irqsave(&dev->adev->slock, flags);
-
 			oldptr = dev->adev->hwptr_done_capture;
+			if (oldptr + length >= runtime->buffer_size) {
+				unsigned int cnt =
+				    runtime->buffer_size - oldptr;
+				memcpy(runtime->dma_area + oldptr * stride, cp,
+				       cnt * stride);
+				memcpy(runtime->dma_area, cp + cnt * stride,
+				       length * stride - cnt * stride);
+			} else {
+				memcpy(runtime->dma_area + oldptr * stride, cp,
+				       length * stride);
+			}
+
+			snd_pcm_stream_lock(substream);
+
 			dev->adev->hwptr_done_capture += length;
 			if (dev->adev->hwptr_done_capture >=
 			    runtime->buffer_size)
@@ -113,19 +124,7 @@ static void em28xx_audio_isocirq(struct urb *urb)
 				period_elapsed = 1;
 			}
 
-			spin_unlock_irqrestore(&dev->adev->slock, flags);
-
-			if (oldptr + length >= runtime->buffer_size) {
-				unsigned int cnt =
-				    runtime->buffer_size - oldptr;
-				memcpy(runtime->dma_area + oldptr * stride, cp,
-				       cnt * stride);
-				memcpy(runtime->dma_area, cp + cnt * stride,
-				       length * stride - cnt * stride);
-			} else {
-				memcpy(runtime->dma_area + oldptr * stride, cp,
-				       length * stride);
-			}
+			snd_pcm_stream_unlock(substream);
 		}
 		if (period_elapsed)
 			snd_pcm_period_elapsed(substream);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 5d837c16ee22..15e2b525310d 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -69,19 +69,33 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
 	int ret, byte;
 
 	if (dev->state & DEV_DISCONNECTED)
-		return(-ENODEV);
+		return -ENODEV;
+
+	if (len > URB_MAX_CTRL_SIZE)
+		return -EINVAL;
 
 	em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
 
+	mutex_lock(&dev->ctrl_urb_lock);
 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
 			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			      0x0000, reg, buf, len, HZ);
+			      0x0000, reg, dev->urb_buf, len, HZ);
+	if (ret < 0) {
+		if (reg_debug)
+			printk(" failed!\n");
+		mutex_unlock(&dev->ctrl_urb_lock);
+		return ret;
+	}
+
+	if (len)
+		memcpy(buf, dev->urb_buf, len);
+
+	mutex_unlock(&dev->ctrl_urb_lock);
 
 	if (reg_debug) {
-		printk(ret < 0 ? " failed!\n" : "%02x values: ", ret);
+		printk("%02x values: ", ret);
 		for (byte = 0; byte < len; byte++)
 			printk(" %02x", (unsigned char)buf[byte]);
-
 		printk("\n");
 	}
 
@@ -102,16 +116,20 @@ int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg)
 
 	em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
 
+	mutex_lock(&dev->ctrl_urb_lock);
 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
 			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			      0x0000, reg, &val, 1, HZ);
-
-	if (reg_debug)
-		printk(ret < 0 ? " failed!\n" :
-				 "%02x\n", (unsigned char) val);
+			      0x0000, reg, dev->urb_buf, 1, HZ);
+	val = dev->urb_buf[0];
+	mutex_unlock(&dev->ctrl_urb_lock);
 
-	if (ret < 0)
+	if (ret < 0) {
+		printk(" failed!\n");
 		return ret;
+	}
+
+	if (reg_debug)
+		printk("%02x\n", (unsigned char) val);
 
 	return val;
 }
@@ -130,19 +148,13 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 {
 	int ret;
 
-	/*usb_control_msg seems to expect a kmalloced buffer */
-	unsigned char *bufs;
-
 	if (dev->state & DEV_DISCONNECTED)
 		return -ENODEV;
 
-	if (len < 1)
+	if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
 		return -EINVAL;
 
-	bufs = kmalloc(len, GFP_KERNEL);
-
 	em28xx_regdbg("req=%02x reg=%02x:", req, reg);
-
 	if (reg_debug) {
 		int i;
 		for (i = 0; i < len; ++i)
@@ -150,16 +162,16 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 		printk("\n");
 	}
 
-	if (!bufs)
-		return -ENOMEM;
-	memcpy(bufs, buf, len);
+	mutex_lock(&dev->ctrl_urb_lock);
+	memcpy(dev->urb_buf, buf, len);
 	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			      0x0000, reg, bufs, len, HZ);
+			      0x0000, reg, dev->urb_buf, len, HZ);
+	mutex_unlock(&dev->ctrl_urb_lock);
+
 	if (dev->wait_after_write)
 		msleep(dev->wait_after_write);
 
-	kfree(bufs);
 	return ret;
 }
 
@@ -270,6 +282,8 @@ static int em28xx_set_audio_source(struct em28xx *dev)
 			break;
 		case EM28XX_AMUX_LINE_IN:
 			input = EM28XX_AUDIO_SRC_LINE;
+			video = disable;
+			line  = enable;
 			break;
 		case EM28XX_AMUX_AC97_VIDEO:
 			input = EM28XX_AUDIO_SRC_LINE;
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 3bab56b997fc..2360c61ddca9 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -337,9 +337,9 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
 	/* Check if board has eeprom */
 	err = i2c_master_recv(&dev->i2c_client, &buf, 0);
 	if (err < 0) {
-		em28xx_errdev("%s: i2c_master_recv failed! err [%d]\n",
-			__func__, err);
-		return err;
+		em28xx_errdev("board has no eeprom\n");
+		memset(eedata, 0, len);
+		return -ENODEV;
 	}
 
 	buf = 0;
@@ -609,14 +609,16 @@ int em28xx_i2c_register(struct em28xx *dev)
 	dev->i2c_client.adapter = &dev->i2c_adap;
 
 	retval = em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata));
-	if (retval < 0) {
+	if ((retval < 0) && (retval != -ENODEV)) {
 		em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n",
 			__func__, retval);
+
 		return retval;
 	}
 
 	if (i2c_scan)
 		em28xx_do_i2c_scan(dev);
+
 	return 0;
 }
 
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index a1ab2ef45578..610f535a257c 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -73,6 +73,7 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 static LIST_HEAD(em28xx_devlist);
+static DEFINE_MUTEX(em28xx_devlist_mutex);
 
 static unsigned int card[]     = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
 static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
@@ -1519,7 +1520,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
 	struct em28xx_fh *fh;
 	enum v4l2_buf_type fh_type = 0;
 
-	lock_kernel();
+	mutex_lock(&em28xx_devlist_mutex);
 	list_for_each_entry(h, &em28xx_devlist, devlist) {
 		if (h->vdev->minor == minor) {
 			dev  = h;
@@ -1535,10 +1536,11 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
 			dev   = h;
 		}
 	}
-	if (NULL == dev) {
-		unlock_kernel();
+	mutex_unlock(&em28xx_devlist_mutex);
+	if (NULL == dev)
 		return -ENODEV;
-	}
+
+	mutex_lock(&dev->lock);
 
 	em28xx_videodbg("open minor=%d type=%s users=%d\n",
 				minor, v4l2_type_names[fh_type], dev->users);
@@ -1547,10 +1549,9 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
 	fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL);
 	if (!fh) {
 		em28xx_errdev("em28xx-video.c: Out of memory?!\n");
-		unlock_kernel();
+		mutex_unlock(&dev->lock);
 		return -ENOMEM;
 	}
-	mutex_lock(&dev->lock);
 	fh->dev = dev;
 	fh->radio = radio;
 	fh->type = fh_type;
@@ -1584,7 +1585,6 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
 			sizeof(struct em28xx_buffer), fh);
 
 	mutex_unlock(&dev->lock);
-	unlock_kernel();
 
 	return errCode;
 }
@@ -1871,6 +1871,7 @@ int em28xx_register_extension(struct em28xx_ops *ops)
 {
 	struct em28xx *dev = NULL;
 
+	mutex_lock(&em28xx_devlist_mutex);
 	mutex_lock(&em28xx_extension_devlist_lock);
 	list_add_tail(&ops->next, &em28xx_extension_devlist);
 	list_for_each_entry(dev, &em28xx_devlist, devlist) {
@@ -1879,6 +1880,7 @@ int em28xx_register_extension(struct em28xx_ops *ops)
 	}
 	printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
 	mutex_unlock(&em28xx_extension_devlist_lock);
+	mutex_unlock(&em28xx_devlist_mutex);
 	return 0;
 }
 EXPORT_SYMBOL(em28xx_register_extension);
@@ -1887,6 +1889,7 @@ void em28xx_unregister_extension(struct em28xx_ops *ops)
 {
 	struct em28xx *dev = NULL;
 
+	mutex_lock(&em28xx_devlist_mutex);
 	list_for_each_entry(dev, &em28xx_devlist, devlist) {
 		if (dev)
 			ops->fini(dev);
@@ -1896,6 +1899,7 @@ void em28xx_unregister_extension(struct em28xx_ops *ops)
 	printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
 	list_del(&ops->next);
 	mutex_unlock(&em28xx_extension_devlist_lock);
+	mutex_unlock(&em28xx_devlist_mutex);
 }
 EXPORT_SYMBOL(em28xx_unregister_extension);
 
@@ -1921,6 +1925,60 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev,
 }
 
 
+static int register_analog_devices(struct em28xx *dev)
+{
+	int ret;
+
+	/* allocate and fill video video_device struct */
+	dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
+	if (!dev->vdev) {
+		em28xx_errdev("cannot allocate video_device.\n");
+		return -ENODEV;
+	}
+
+	/* register v4l2 video video_device */
+	ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
+				       video_nr[dev->devno]);
+	if (ret) {
+		em28xx_errdev("unable to register video device (error=%i).\n",
+			      ret);
+		return ret;
+	}
+
+	/* Allocate and fill vbi video_device struct */
+	dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi");
+
+	/* register v4l2 vbi video_device */
+	ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
+					vbi_nr[dev->devno]);
+	if (ret < 0) {
+		em28xx_errdev("unable to register vbi device\n");
+		return ret;
+	}
+
+	if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
+		dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
+		if (!dev->radio_dev) {
+			em28xx_errdev("cannot allocate video_device.\n");
+			return -ENODEV;
+		}
+		ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
+					    radio_nr[dev->devno]);
+		if (ret < 0) {
+			em28xx_errdev("can't register radio device\n");
+			return ret;
+		}
+		em28xx_info("Registered radio device as /dev/radio%d\n",
+			    dev->radio_dev->num);
+	}
+
+	em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
+				dev->vdev->num, dev->vbi_dev->num);
+
+	return 0;
+}
+
+
 /*
  * em28xx_init_dev()
  * allocates and inits the device structs, registers i2c bus and v4l device
@@ -1936,6 +1994,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 
 	dev->udev = udev;
 	mutex_init(&dev->lock);
+	mutex_init(&dev->ctrl_urb_lock);
 	spin_lock_init(&dev->slock);
 	init_waitqueue_head(&dev->open);
 	init_waitqueue_head(&dev->wait_frame);
@@ -1953,8 +2012,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	errCode = em28xx_config(dev);
 	if (errCode) {
 		em28xx_errdev("error configuring device\n");
-		em28xx_devused &= ~(1<<dev->devno);
-		kfree(dev);
 		return -ENOMEM;
 	}
 
@@ -2001,50 +2058,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 		return errCode;
 	}
 
-	list_add_tail(&dev->devlist, &em28xx_devlist);
-
-	/* allocate and fill video video_device struct */
-	dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
-	if (NULL == dev->vdev) {
-		em28xx_errdev("cannot allocate video_device.\n");
-		goto fail_unreg;
-	}
-
-	/* register v4l2 video video_device */
-	retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
-				       video_nr[dev->devno]);
-	if (retval) {
-		em28xx_errdev("unable to register video device (error=%i).\n",
-			      retval);
-		goto fail_unreg;
-	}
-
-	/* Allocate and fill vbi video_device struct */
-	dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi");
-	/* register v4l2 vbi video_device */
-	if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
-					vbi_nr[dev->devno]) < 0) {
-		em28xx_errdev("unable to register vbi device\n");
-		retval = -ENODEV;
-		goto fail_unreg;
-	}
-
-	if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
-		dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
-		if (NULL == dev->radio_dev) {
-			em28xx_errdev("cannot allocate video_device.\n");
-			goto fail_unreg;
-		}
-		retval = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
-					    radio_nr[dev->devno]);
-		if (retval < 0) {
-			em28xx_errdev("can't register radio device\n");
-			goto fail_unreg;
-		}
-		em28xx_info("Registered radio device as /dev/radio%d\n",
-			    dev->radio_dev->num);
-	}
-
 	/* init video dma queues */
 	INIT_LIST_HEAD(&dev->vidq.active);
 	INIT_LIST_HEAD(&dev->vidq.queued);
@@ -2071,8 +2084,14 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 
 	video_mux(dev, 0);
 
-	em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
-				dev->vdev->num, dev->vbi_dev->num);
+	mutex_lock(&em28xx_devlist_mutex);
+	list_add_tail(&dev->devlist, &em28xx_devlist);
+	retval = register_analog_devices(dev);
+	if (retval < 0) {
+		em28xx_release_resources(dev);
+		mutex_unlock(&em28xx_devlist_mutex);
+		goto fail_reg_devices;
+	}
 
 	mutex_lock(&em28xx_extension_devlist_lock);
 	if (!list_empty(&em28xx_extension_devlist)) {
@@ -2082,13 +2101,12 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 		}
 	}
 	mutex_unlock(&em28xx_extension_devlist_lock);
+	mutex_unlock(&em28xx_devlist_mutex);
 
 	return 0;
 
-fail_unreg:
-	em28xx_release_resources(dev);
+fail_reg_devices:
 	mutex_unlock(&dev->lock);
-	kfree(dev);
 	return retval;
 }
 
@@ -2231,8 +2249,12 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 
 	/* allocate device struct */
 	retval = em28xx_init_dev(&dev, udev, nr);
-	if (retval)
+	if (retval) {
+		em28xx_devused &= ~(1<<dev->devno);
+		kfree(dev);
+
 		return retval;
+	}
 
 	em28xx_info("Found %s\n", em28xx_boards[dev->model].name);
 
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 82781178e0a3..5956e9b3062f 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -102,6 +102,9 @@
 #define EM28XX_MIN_BUF 4
 #define EM28XX_DEF_BUF 8
 
+/*Limits the max URB message size */
+#define URB_MAX_CTRL_SIZE 80
+
 /* Params for validated field */
 #define EM28XX_BOARD_NOT_VALIDATED 1
 #define EM28XX_BOARD_VALIDATED	   0
@@ -430,6 +433,7 @@ struct em28xx {
 
 	/* locks */
 	struct mutex lock;
+	struct mutex ctrl_urb_lock;	/* protects urb_buf */
 	/* spinlock_t queue_lock; */
 	struct list_head inqueue, outqueue;
 	wait_queue_head_t open, wait_frame, wait_stream;
@@ -451,6 +455,8 @@ struct em28xx {
 	unsigned int *alt_max_pkt_size;	/* array of wMaxPacketSize */
 	struct urb *urb[EM28XX_NUM_BUFS];	/* urb for isoc transfers */
 	char *transfer_buffer[EM28XX_NUM_BUFS];	/* transfer buffers for isoc transfer */
+	char urb_buf[URB_MAX_CTRL_SIZE];	/* urb control msg buffer */
+
 	/* helper funcs that call usb_control_msg */
 	int (*em28xx_write_regs) (struct em28xx *dev, u16 reg,
 					char *buf, int len);
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index a9d51ba7c57c..de28354ea5ba 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -846,10 +846,13 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	return 0;
 }
 
+/* called on streamoff with alt 0 and on disconnect */
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	int retry = 50;
 
+	if (!gspca_dev->present)
+		return;
 	reg_w_val(gspca_dev, 0x0000, 0x00);
 	reg_r(gspca_dev, 0x0002, 1);
 	reg_w_val(gspca_dev, 0x0053, 0x00);
diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c
index 65d3cbfe6b27..607942fd7970 100644
--- a/drivers/media/video/gspca/finepix.c
+++ b/drivers/media/video/gspca/finepix.c
@@ -276,6 +276,12 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	/* Stop the state machine */
 	if (dev->state != FPIX_NOP)
 		wait_for_completion(&dev->can_close);
+}
+
+/* called on streamoff with alt 0 and disconnect */
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+	struct usb_fpix *dev = (struct usb_fpix *) gspca_dev;
 
 	usb_free_urb(dev->control_urb);
 	dev->control_urb = NULL;
@@ -385,6 +391,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 error:
 	/* Free the ressources */
 	sd_stopN(gspca_dev);
+	sd_stop0(gspca_dev);
 	return ret;
 }
 
@@ -425,6 +432,7 @@ static const struct sd_desc sd_desc = {
 	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
+	.stop0 = sd_stop0,
 };
 
 /* -- device connect -- */
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index e48fbfc8ad05..748a87e82e44 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -646,15 +646,14 @@ static void gspca_stream_off(struct gspca_dev *gspca_dev)
 {
 	gspca_dev->streaming = 0;
 	atomic_set(&gspca_dev->nevent, 0);
-	if (gspca_dev->present) {
-		if (gspca_dev->sd_desc->stopN)
-			gspca_dev->sd_desc->stopN(gspca_dev);
-		destroy_urbs(gspca_dev);
-		gspca_set_alt0(gspca_dev);
-		if (gspca_dev->sd_desc->stop0)
-			gspca_dev->sd_desc->stop0(gspca_dev);
-		PDEBUG(D_STREAM, "stream off OK");
-	}
+	if (gspca_dev->present
+	    && gspca_dev->sd_desc->stopN)
+		gspca_dev->sd_desc->stopN(gspca_dev);
+	destroy_urbs(gspca_dev);
+	gspca_set_alt0(gspca_dev);
+	if (gspca_dev->sd_desc->stop0)
+		gspca_dev->sd_desc->stop0(gspca_dev);
+	PDEBUG(D_STREAM, "stream off OK");
 }
 
 static void gspca_set_default_mode(struct gspca_dev *gspca_dev)
@@ -863,7 +862,7 @@ static int dev_open(struct inode *inode, struct file *file)
 	int ret;
 
 	PDEBUG(D_STREAM, "%s open", current->comm);
-	gspca_dev = (struct gspca_dev *) video_devdata(file);
+	gspca_dev = video_drvdata(file);
 	if (mutex_lock_interruptible(&gspca_dev->queue_lock))
 		return -ERESTARTSYS;
 	if (!gspca_dev->present) {
@@ -875,6 +874,13 @@ static int dev_open(struct inode *inode, struct file *file)
 		ret = -EBUSY;
 		goto out;
 	}
+
+	/* protect the subdriver against rmmod */
+	if (!try_module_get(gspca_dev->module)) {
+		ret = -ENODEV;
+		goto out;
+	}
+
 	gspca_dev->users++;
 
 	/* one more user */
@@ -884,10 +890,10 @@ static int dev_open(struct inode *inode, struct file *file)
 #ifdef GSPCA_DEBUG
 	/* activate the v4l2 debug */
 	if (gspca_debug & D_V4L2)
-		gspca_dev->vdev.debug |= V4L2_DEBUG_IOCTL
+		gspca_dev->vdev->debug |= V4L2_DEBUG_IOCTL
 					| V4L2_DEBUG_IOCTL_ARG;
 	else
-		gspca_dev->vdev.debug &= ~(V4L2_DEBUG_IOCTL
+		gspca_dev->vdev->debug &= ~(V4L2_DEBUG_IOCTL
 					| V4L2_DEBUG_IOCTL_ARG);
 #endif
 	ret = 0;
@@ -921,6 +927,7 @@ static int dev_close(struct inode *inode, struct file *file)
 		gspca_dev->memory = GSPCA_MEMORY_NO;
 	}
 	file->private_data = NULL;
+	module_put(gspca_dev->module);
 	mutex_unlock(&gspca_dev->queue_lock);
 
 	PDEBUG(D_STREAM, "close done");
@@ -1748,11 +1755,6 @@ out:
 	return ret;
 }
 
-static void dev_release(struct video_device *vfd)
-{
-	/* nothing */
-}
-
 static struct file_operations dev_fops = {
 	.owner = THIS_MODULE,
 	.open = dev_open,
@@ -1800,7 +1802,7 @@ static struct video_device gspca_template = {
 	.name = "gspca main driver",
 	.fops = &dev_fops,
 	.ioctl_ops = &dev_ioctl_ops,
-	.release = dev_release,		/* mandatory */
+	.release = video_device_release,
 	.minor = -1,
 };
 
@@ -1869,17 +1871,18 @@ int gspca_dev_probe(struct usb_interface *intf,
 	init_waitqueue_head(&gspca_dev->wq);
 
 	/* init video stuff */
-	memcpy(&gspca_dev->vdev, &gspca_template, sizeof gspca_template);
-	gspca_dev->vdev.parent = &dev->dev;
-	memcpy(&gspca_dev->fops, &dev_fops, sizeof gspca_dev->fops);
-	gspca_dev->vdev.fops = &gspca_dev->fops;
-	gspca_dev->fops.owner = module;		/* module protection */
+	gspca_dev->vdev = video_device_alloc();
+	memcpy(gspca_dev->vdev, &gspca_template, sizeof gspca_template);
+	gspca_dev->vdev->parent = &dev->dev;
+	gspca_dev->module = module;
 	gspca_dev->present = 1;
-	ret = video_register_device(&gspca_dev->vdev,
+	video_set_drvdata(gspca_dev->vdev, gspca_dev);
+	ret = video_register_device(gspca_dev->vdev,
 				  VFL_TYPE_GRABBER,
 				  video_nr);
 	if (ret < 0) {
 		err("video_register_device err %d", ret);
+		video_device_release(gspca_dev->vdev);
 		goto out;
 	}
 
@@ -1887,7 +1890,8 @@ int gspca_dev_probe(struct usb_interface *intf,
 	PDEBUG(D_PROBE, "probe ok");
 	return 0;
 out:
-	kref_put(&gspca_dev->kref, gspca_delete);
+	kfree(gspca_dev->usb_buf);
+	kfree(gspca_dev);
 	return ret;
 }
 EXPORT_SYMBOL(gspca_dev_probe);
@@ -1905,7 +1909,7 @@ void gspca_disconnect(struct usb_interface *intf)
 	usb_set_intfdata(intf, NULL);
 
 /* We don't want people trying to open up the device */
-	video_unregister_device(&gspca_dev->vdev);
+	video_unregister_device(gspca_dev->vdev);
 
 	gspca_dev->present = 0;
 	gspca_dev->streaming = 0;
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 1d9dc90b4791..d25e8d69373b 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -97,7 +97,7 @@ struct sd_desc {
 	cam_pkt_op pkt_scan;
 /* optional operations */
 	cam_v_op stopN;		/* called on stream off - main alt */
-	cam_v_op stop0;		/* called on stream off - alt 0 */
+	cam_v_op stop0;		/* called on stream off & disconnect - alt 0 */
 	cam_v_op dq_callback;	/* called when a frame has been dequeued */
 	cam_jpg_op get_jcomp;
 	cam_jpg_op set_jcomp;
@@ -120,8 +120,8 @@ struct gspca_frame {
 };
 
 struct gspca_dev {
-	struct video_device vdev;	/* !! must be the first item */
-	struct file_operations fops;
+	struct video_device *vdev;
+	struct module *module;		/* subdriver handling the device */
 	struct usb_device *dev;
 	struct kref kref;
 	struct file *capt_file;		/* file doing video capture */
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index e5ff9a6199ef..fbd45e235d97 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -749,10 +749,13 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
 }
 
+/* called on streamoff with alt 0 and on disconnect */
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	if (!gspca_dev->present)
+		return;
 	if (sd->sensor == SENSOR_PAC7302) {
 		reg_w(gspca_dev, 0xff, 0x01);
 		reg_w(gspca_dev, 0x78, 0x40);
diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c
index b742f260c7ca..e29954c1c38c 100644
--- a/drivers/media/video/gspca/spca501.c
+++ b/drivers/media/video/gspca/spca501.c
@@ -2022,8 +2022,11 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x01, 0x00);
 }
 
+/* called on streamoff with alt 0 and on disconnect */
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
+	if (!gspca_dev->present)
+		return;
 	reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x05, 0x00);
 }
 
diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c
index b345749213cf..895b9fe4018c 100644
--- a/drivers/media/video/gspca/spca505.c
+++ b/drivers/media/video/gspca/spca505.c
@@ -742,8 +742,12 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_write(gspca_dev->dev, 0x02, 0x00, 0x00);
 }
 
+/* called on streamoff with alt 0 and on disconnect */
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
+	if (!gspca_dev->present)
+		return;
+
 	/* This maybe reset or power control */
 	reg_write(gspca_dev->dev, 0x03, 0x03, 0x20);
 	reg_write(gspca_dev->dev, 0x03, 0x01, 0x0);
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index 020a03c466c1..c3de4e44123d 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -766,10 +766,13 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	}
 }
 
+/* called on streamoff with alt 0 and on disconnect */
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	if (!gspca_dev->present)
+		return;
 	if (sd->chip_revision == Rev012A) {
 		reg_w_val(gspca_dev->dev, 0x8118, 0x29);
 		reg_w_val(gspca_dev->dev, 0x8114, 0x08);
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index be46d9232540..17af353ddd1c 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -1633,10 +1633,13 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w(dev, 0xa0, 0x09, 0xb003);
 }
 
+/* called on streamoff with alt 0 and on disconnect */
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	struct usb_device *dev = gspca_dev->dev;
 
+	if (!gspca_dev->present)
+		return;
 	reg_w(dev, 0x89, 0xffff, 0xffff);
 }
 
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 8b3101d347c3..0befacf49855 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -7336,10 +7336,13 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	return 0;
 }
 
+/* called on streamoff with alt 0 and on disconnect */
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	if (!gspca_dev->present)
+		return;
 	send_unknown(gspca_dev->dev, sd->sensor);
 }
 
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 9f1038f65d3d..70a77625107d 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -1073,7 +1073,7 @@ static int pxa_camera_probe(struct platform_device *pdev)
 		goto exit;
 	}
 
-	pcdev->clk = clk_get(&pdev->dev, "CAMCLK");
+	pcdev->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(pcdev->clk)) {
 		err = PTR_ERR(pcdev->clk);
 		goto exit_kfree;
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 5272926db73e..3c3f8cf73108 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -192,7 +192,7 @@ struct s2255_dmaqueue {
 #define S2255_FW_FAILED		3
 #define S2255_FW_DISCONNECTING  4
 
-#define S2255_FW_MARKER         0x22552f2f
+#define S2255_FW_MARKER		cpu_to_le32(0x22552f2f)
 /* 2255 read states */
 #define S2255_READ_IDLE         0
 #define S2255_READ_FRAME        1
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 84bdc2ee69e6..a443e136dc41 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -354,7 +354,7 @@ static inline void i2o_block_sglist_free(struct i2o_block_request *ireq)
  *	@req: the request to prepare
  *
  *	Allocate the necessary i2o_block_request struct and connect it to
- *	the request. This is needed that we not loose the SG list later on.
+ *	the request. This is needed that we not lose the SG list later on.
  *
  *	Returns BLKPREP_OK on success or BLKPREP_DEFER on failure.
  */
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index be2b5926d26c..6e53a30bfd38 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -49,7 +49,6 @@ static int i2o_hrt_get(struct i2o_controller *c);
 /**
  *	i2o_msg_get_wait - obtain an I2O message from the IOP
  *	@c: I2O controller
- *	@msg: pointer to a I2O message pointer
  *	@wait: how long to wait until timeout
  *
  *	This function waits up to wait seconds for a message slot to be
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index e4c0db4dc7b1..9e485459f63b 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -474,9 +474,9 @@ static __init int asic3_gpio_probe(struct platform_device *pdev,
 	u16 dir_reg[ASIC3_NUM_GPIO_BANKS];
 	int i;
 
-	memzero(alt_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
-	memzero(out_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
-	memzero(dir_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
+	memset(alt_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
+	memset(out_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
+	memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16));
 
 	/* Enable all GPIOs */
 	asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, MASK), 0xffff);
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
index b4ed57e02729..6063dc2b52e8 100644
--- a/drivers/mfd/mcp-core.c
+++ b/drivers/mfd/mcp-core.c
@@ -18,7 +18,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 #include <asm/system.h>
 
 #include "mcp.h"
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 28380b20bc70..62b32dabf629 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -20,7 +20,7 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c
index 61aeaf79640d..86fed4870f93 100644
--- a/drivers/mfd/ucb1x00-assabet.c
+++ b/drivers/mfd/ucb1x00-assabet.c
@@ -15,7 +15,7 @@
 #include <linux/proc_fs.h>
 #include <linux/device.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 
 #include "ucb1x00.h"
 
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index a316f1b75933..6860c924f364 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -25,7 +25,7 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 #include <mach/hardware.h>
 
 #include "ucb1x00.h"
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 44762ca86a8d..61b7d3eb9a2f 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -31,7 +31,7 @@
 #include <linux/slab.h>
 #include <linux/kthread.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 #include <mach/collie.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c
index 8c389d606c30..3ee698ad8599 100644
--- a/drivers/misc/sgi-gru/grufault.c
+++ b/drivers/misc/sgi-gru/grufault.c
@@ -254,7 +254,11 @@ static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr,
 		return 1;
 
 	*paddr = pte_pfn(pte) << PAGE_SHIFT;
+#ifdef CONFIG_HUGETLB_PAGE
 	*pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT;
+#else
+	*pageshift = PAGE_SHIFT;
+#endif
 	return 0;
 
 err:
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index 5c027b6b4e5a..650983806392 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -481,7 +481,7 @@ struct vm_operations_struct gru_vm_ops = {
 	.fault		= gru_fault,
 };
 
-module_init(gru_init);
+fs_initcall(gru_init);
 module_exit(gru_exit);
 
 module_param(gru_options, ulong, 0644);
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
index 7bcb81002dcf..571b211608d1 100644
--- a/drivers/misc/sony-laptop.c
+++ b/drivers/misc/sony-laptop.c
@@ -1038,8 +1038,8 @@ static int sony_nc_add(struct acpi_device *device)
 		goto outinput;
 	}
 
-	if (!acpi_video_backlight_support()) {
-		printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be "
+	if (acpi_video_backlight_support()) {
+		printk(KERN_INFO DRV_PFX "brightness ignored, must be "
 		       "controlled by ACPI video driver\n");
 	} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
 						&handle))) {
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 7a4a26b0edd2..899766e16fa8 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -5318,6 +5318,7 @@ static enum fan_control_commands fan_control_commands;
 
 static u8 fan_control_initial_status;
 static u8 fan_control_desired_level;
+static u8 fan_control_resume_level;
 static int fan_watchdog_maxinterval;
 
 static struct mutex fan_mutex;
@@ -5440,8 +5441,8 @@ static int fan_set_level(int level)
 
 	case TPACPI_FAN_WR_ACPI_FANS:
 	case TPACPI_FAN_WR_TPEC:
-		if ((level != TP_EC_FAN_AUTO) &&
-		    (level != TP_EC_FAN_FULLSPEED) &&
+		if (!(level & TP_EC_FAN_AUTO) &&
+		    !(level & TP_EC_FAN_FULLSPEED) &&
 		    ((level < 0) || (level > 7)))
 			return -EINVAL;
 
@@ -6005,38 +6006,67 @@ static void fan_exit(void)
 
 static void fan_suspend(pm_message_t state)
 {
+	int rc;
+
 	if (!fan_control_allowed)
 		return;
 
 	/* Store fan status in cache */
-	fan_get_status_safe(NULL);
+	fan_control_resume_level = 0;
+	rc = fan_get_status_safe(&fan_control_resume_level);
+	if (rc < 0)
+		printk(TPACPI_NOTICE
+			"failed to read fan level for later "
+			"restore during resume: %d\n", rc);
+
+	/* if it is undefined, don't attempt to restore it.
+	 * KEEP THIS LAST */
 	if (tp_features.fan_ctrl_status_undef)
-		fan_control_desired_level = TP_EC_FAN_AUTO;
+		fan_control_resume_level = 0;
 }
 
 static void fan_resume(void)
 {
-	u8 saved_fan_level;
 	u8 current_level = 7;
 	bool do_set = false;
+	int rc;
 
 	/* DSDT *always* updates status on resume */
 	tp_features.fan_ctrl_status_undef = 0;
 
-	saved_fan_level = fan_control_desired_level;
 	if (!fan_control_allowed ||
+	    !fan_control_resume_level ||
 	    (fan_get_status_safe(&current_level) < 0))
 		return;
 
 	switch (fan_control_access_mode) {
 	case TPACPI_FAN_WR_ACPI_SFAN:
-		do_set = (saved_fan_level > current_level);
+		/* never decrease fan level */
+		do_set = (fan_control_resume_level > current_level);
 		break;
 	case TPACPI_FAN_WR_ACPI_FANS:
 	case TPACPI_FAN_WR_TPEC:
-		do_set = ((saved_fan_level & TP_EC_FAN_FULLSPEED) ||
-			  (saved_fan_level == 7 &&
-			   !(current_level & TP_EC_FAN_FULLSPEED)));
+		/* never decrease fan level, scale is:
+		 * TP_EC_FAN_FULLSPEED > 7 >= TP_EC_FAN_AUTO
+		 *
+		 * We expect the firmware to set either 7 or AUTO, but we
+		 * handle FULLSPEED out of paranoia.
+		 *
+		 * So, we can safely only restore FULLSPEED or 7, anything
+		 * else could slow the fan.  Restoring AUTO is useless, at
+		 * best that's exactly what the DSDT already set (it is the
+		 * slower it uses).
+		 *
+		 * Always keep in mind that the DSDT *will* have set the
+		 * fans to what the vendor supposes is the best level.  We
+		 * muck with it only to speed the fan up.
+		 */
+		if (fan_control_resume_level != 7 &&
+		    !(fan_control_resume_level & TP_EC_FAN_FULLSPEED))
+			return;
+		else
+			do_set = !(current_level & TP_EC_FAN_FULLSPEED) &&
+				 (current_level != fan_control_resume_level);
 		break;
 	default:
 		return;
@@ -6044,8 +6074,11 @@ static void fan_resume(void)
 	if (do_set) {
 		printk(TPACPI_NOTICE
 			"restoring fan level to 0x%02x\n",
-			saved_fan_level);
-		fan_set_level_safe(saved_fan_level);
+			fan_control_resume_level);
+		rc = fan_set_level_safe(fan_control_resume_level);
+		if (rc < 0)
+			printk(TPACPI_NOTICE
+				"failed to restore fan level: %d\n", rc);
 	}
 }
 
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index 2f0fcdb869b7..eb29b1d933ac 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -10,20 +10,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- *  2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Changed to conform redesigned i.MX scatter gather DMA interface
- *
- *  2005-11-04 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Updated for 2.6.14 kernel
- *
- *  2005-12-13 Jay Monkman <jtm@smoothsmoothie.com>
- *             Found and corrected problems in the write path
- *
- *  2005-12-30 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             The event handling rewritten right way in softirq.
- *             Added many ugly hacks and delays to overcome SDHC
- *             deficiencies
- *
  */
 
 #include <linux/module.h>
@@ -37,9 +23,9 @@
 #include <linux/mmc/card.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <asm/dma.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 #include <mach/mmc.h>
@@ -50,17 +36,16 @@
 #define DRIVER_NAME "imx-mmc"
 
 #define IMXMCI_INT_MASK_DEFAULT (INT_MASK_BUF_READY | INT_MASK_DATA_TRAN | \
-	              INT_MASK_WRITE_OP_DONE | INT_MASK_END_CMD_RES | \
-		      INT_MASK_AUTO_CARD_DETECT | INT_MASK_DAT0_EN | INT_MASK_SDIO)
+				 INT_MASK_WRITE_OP_DONE | INT_MASK_END_CMD_RES | \
+				 INT_MASK_AUTO_CARD_DETECT | INT_MASK_DAT0_EN | INT_MASK_SDIO)
 
 struct imxmci_host {
 	struct mmc_host		*mmc;
 	spinlock_t		lock;
 	struct resource		*res;
+	void __iomem		*base;
 	int			irq;
 	imx_dmach_t		dma;
-	unsigned int		clkrt;
-	unsigned int		cmdat;
 	volatile unsigned int	imask;
 	unsigned int		power_mode;
 	unsigned int		present;
@@ -74,7 +59,7 @@ struct imxmci_host {
 	struct tasklet_struct	tasklet;
 	unsigned int		status_reg;
 	unsigned long		pending_events;
-	/* Next to fields are there for CPU driven transfers to overcome SDHC deficiencies */
+	/* Next two fields are there for CPU driven transfers to overcome SDHC deficiencies */
 	u16			*data_ptr;
 	unsigned int		data_cnt;
 	atomic_t		stuck_timeout;
@@ -114,14 +99,22 @@ struct imxmci_host {
 static void imxmci_stop_clock(struct imxmci_host *host)
 {
 	int i = 0;
-	MMC_STR_STP_CLK &= ~STR_STP_CLK_START_CLK;
-	while(i < 0x1000) {
-	        if(!(i & 0x7f))
-			MMC_STR_STP_CLK |= STR_STP_CLK_STOP_CLK;
+	u16 reg;
+
+	reg = readw(host->base + MMC_REG_STR_STP_CLK);
+	writew(reg & ~STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
+	while (i < 0x1000) {
+		if (!(i & 0x7f)) {
+			reg = readw(host->base + MMC_REG_STR_STP_CLK);
+			writew(reg | STR_STP_CLK_STOP_CLK,
+					host->base + MMC_REG_STR_STP_CLK);
+		}
 
-		if(!(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)) {
+		reg = readw(host->base + MMC_REG_STATUS);
+		if (!(reg & STATUS_CARD_BUS_CLK_RUN)) {
 			/* Check twice before cut */
-			if(!(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN))
+			reg = readw(host->base + MMC_REG_STATUS);
+			if (!(reg & STATUS_CARD_BUS_CLK_RUN))
 				return;
 		}
 
@@ -135,8 +128,10 @@ static int imxmci_start_clock(struct imxmci_host *host)
 	unsigned int trials = 0;
 	unsigned int delay_limit = 128;
 	unsigned long flags;
+	u16 reg;
 
-	MMC_STR_STP_CLK &= ~STR_STP_CLK_STOP_CLK;
+	reg = readw(host->base + MMC_REG_STR_STP_CLK);
+	writew(reg & ~STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK);
 
 	clear_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
 
@@ -145,18 +140,21 @@ static int imxmci_start_clock(struct imxmci_host *host)
 	 * then 6 delay loops, but during card detection (low clockrate)
 	 * it takes up to 5000 delay loops and sometimes fails for the first time
 	 */
-	MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
+	reg = readw(host->base + MMC_REG_STR_STP_CLK);
+	writew(reg | STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
 
 	do {
 		unsigned int delay = delay_limit;
 
-		while(delay--){
-			if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)
+		while (delay--) {
+			reg = readw(host->base + MMC_REG_STATUS);
+			if (reg & STATUS_CARD_BUS_CLK_RUN)
 				/* Check twice before cut */
-				if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)
+				reg = readw(host->base + MMC_REG_STATUS);
+				if (reg & STATUS_CARD_BUS_CLK_RUN)
 					return 0;
 
-			if(test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events))
+			if (test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events))
 				return 0;
 		}
 
@@ -167,58 +165,59 @@ static int imxmci_start_clock(struct imxmci_host *host)
 		 * IRQ or schedule delays this function execution and the clocks has
 		 * been already stopped by other means (response processing, SDHC HW)
 		 */
-		if(!test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events))
-			MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
+		if (!test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events)) {
+			reg = readw(host->base + MMC_REG_STR_STP_CLK);
+			writew(reg | STR_STP_CLK_START_CLK,
+					host->base + MMC_REG_STR_STP_CLK);
+		}
 		local_irq_restore(flags);
 
-	} while(++trials<256);
+	} while (++trials < 256);
 
 	dev_err(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n");
 
 	return -1;
 }
 
-static void imxmci_softreset(void)
+static void imxmci_softreset(struct imxmci_host *host)
 {
+	int i;
+
 	/* reset sequence */
-	MMC_STR_STP_CLK = 0x8;
-	MMC_STR_STP_CLK = 0xD;
-	MMC_STR_STP_CLK = 0x5;
-	MMC_STR_STP_CLK = 0x5;
-	MMC_STR_STP_CLK = 0x5;
-	MMC_STR_STP_CLK = 0x5;
-	MMC_STR_STP_CLK = 0x5;
-	MMC_STR_STP_CLK = 0x5;
-	MMC_STR_STP_CLK = 0x5;
-	MMC_STR_STP_CLK = 0x5;
-
-	MMC_RES_TO = 0xff;
-	MMC_BLK_LEN = 512;
-	MMC_NOB = 1;
+	writew(0x08, host->base + MMC_REG_STR_STP_CLK);
+	writew(0x0D, host->base + MMC_REG_STR_STP_CLK);
+
+	for (i = 0; i < 8; i++)
+		writew(0x05, host->base + MMC_REG_STR_STP_CLK);
+
+	writew(0xff, host->base + MMC_REG_RES_TO);
+	writew(512, host->base + MMC_REG_BLK_LEN);
+	writew(1, host->base + MMC_REG_NOB);
 }
 
 static int imxmci_busy_wait_for_status(struct imxmci_host *host,
-			unsigned int *pstat, unsigned int stat_mask,
-			int timeout, const char *where)
+				       unsigned int *pstat, unsigned int stat_mask,
+				       int timeout, const char *where)
 {
-	int loops=0;
-	while(!(*pstat & stat_mask)) {
-		loops+=2;
-		if(loops >= timeout) {
+	int loops = 0;
+
+	while (!(*pstat & stat_mask)) {
+		loops += 2;
+		if (loops >= timeout) {
 			dev_dbg(mmc_dev(host->mmc), "busy wait timeout in %s, STATUS = 0x%x (0x%x)\n",
 				where, *pstat, stat_mask);
 			return -1;
 		}
 		udelay(2);
-		*pstat |= MMC_STATUS;
+		*pstat |= readw(host->base + MMC_REG_STATUS);
 	}
-	if(!loops)
+	if (!loops)
 		return 0;
 
 	/* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */
-	if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000))
+	if (!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock >= 8000000))
 		dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
-			loops, where, *pstat, stat_mask);
+			 loops, where, *pstat, stat_mask);
 	return loops;
 }
 
@@ -235,8 +234,8 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
 	host->data = data;
 	data->bytes_xfered = 0;
 
-	MMC_NOB = nob;
-	MMC_BLK_LEN = blksz;
+	writew(nob, host->base + MMC_REG_NOB);
+	writew(blksz, host->base + MMC_REG_BLK_LEN);
 
 	/*
 	 * DMA cannot be used for small block sizes, we have to use CPU driven transfers otherwise.
@@ -252,14 +251,14 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
 			host->dma_dir = DMA_FROM_DEVICE;
 
 			/* Hack to enable read SCR */
-			MMC_NOB = 1;
-			MMC_BLK_LEN = 512;
+			writew(1, host->base + MMC_REG_NOB);
+			writew(512, host->base + MMC_REG_BLK_LEN);
 		} else {
 			host->dma_dir = DMA_TO_DEVICE;
 		}
 
 		/* Convert back to virtual address */
-		host->data_ptr = (u16*)sg_virt(data->sg);
+		host->data_ptr = (u16 *)sg_virt(data->sg);
 		host->data_cnt = 0;
 
 		clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events);
@@ -271,10 +270,11 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
 	if (data->flags & MMC_DATA_READ) {
 		host->dma_dir = DMA_FROM_DEVICE;
 		host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
-						data->sg_len,  host->dma_dir);
+					     data->sg_len,  host->dma_dir);
 
 		imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz,
-			host->res->start + MMC_BUFFER_ACCESS_OFS, DMA_MODE_READ);
+				 host->res->start + MMC_REG_BUFFER_ACCESS,
+				 DMA_MODE_READ);
 
 		/*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_READ, IMX_DMA_WIDTH_16, CCR_REN);*/
 		CCR(host->dma) = CCR_DMOD_LINEAR | CCR_DSIZ_32 | CCR_SMOD_FIFO | CCR_SSIZ_16 | CCR_REN;
@@ -282,10 +282,11 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
 		host->dma_dir = DMA_TO_DEVICE;
 
 		host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
-						data->sg_len,  host->dma_dir);
+					     data->sg_len,  host->dma_dir);
 
 		imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz,
-			host->res->start + MMC_BUFFER_ACCESS_OFS, DMA_MODE_WRITE);
+				 host->res->start + MMC_REG_BUFFER_ACCESS,
+				 DMA_MODE_WRITE);
 
 		/*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_WRITE, IMX_DMA_WIDTH_16, CCR_REN);*/
 		CCR(host->dma) = CCR_SMOD_LINEAR | CCR_SSIZ_32 | CCR_DMOD_FIFO | CCR_DSIZ_16 | CCR_REN;
@@ -293,12 +294,12 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
 
 #if 1	/* This code is there only for consistency checking and can be disabled in future */
 	host->dma_size = 0;
-	for(i=0; i<host->dma_nents; i++)
-		host->dma_size+=data->sg[i].length;
+	for (i = 0; i < host->dma_nents; i++)
+		host->dma_size += data->sg[i].length;
 
 	if (datasz > host->dma_size) {
 		dev_err(mmc_dev(host->mmc), "imxmci_setup_data datasz 0x%x > 0x%x dm_size\n",
-		       datasz, host->dma_size);
+			datasz, host->dma_size);
 	}
 #endif
 
@@ -306,7 +307,7 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
 
 	wmb();
 
-	if(host->actual_bus_width == MMC_BUS_WIDTH_4)
+	if (host->actual_bus_width == MMC_BUS_WIDTH_4)
 		BLR(host->dma) = 0;	/* burst 64 byte read / 64 bytes write */
 	else
 		BLR(host->dma) = 16;	/* burst 16 byte read / 16 bytes write */
@@ -317,9 +318,8 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
 	clear_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events);
 
 	/* start DMA engine for read, write is delayed after initial response */
-	if (host->dma_dir == DMA_FROM_DEVICE) {
+	if (host->dma_dir == DMA_FROM_DEVICE)
 		imx_dma_enable(host->dma);
-	}
 }
 
 static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd, unsigned int cmdat)
@@ -351,16 +351,16 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd,
 		break;
 	}
 
-	if ( test_and_clear_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events) )
+	if (test_and_clear_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events))
 		cmdat |= CMD_DAT_CONT_INIT; /* This command needs init */
 
-	if ( host->actual_bus_width == MMC_BUS_WIDTH_4 )
+	if (host->actual_bus_width == MMC_BUS_WIDTH_4)
 		cmdat |= CMD_DAT_CONT_BUS_WIDTH_4;
 
-	MMC_CMD = cmd->opcode;
-	MMC_ARGH = cmd->arg >> 16;
-	MMC_ARGL = cmd->arg & 0xffff;
-	MMC_CMD_DAT_CONT = cmdat;
+	writew(cmd->opcode, host->base + MMC_REG_CMD);
+	writew(cmd->arg >> 16, host->base + MMC_REG_ARGH);
+	writew(cmd->arg & 0xffff, host->base + MMC_REG_ARGL);
+	writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT);
 
 	atomic_set(&host->stuck_timeout, 0);
 	set_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events);
@@ -368,18 +368,18 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd,
 
 	imask = IMXMCI_INT_MASK_DEFAULT;
 	imask &= ~INT_MASK_END_CMD_RES;
-	if ( cmdat & CMD_DAT_CONT_DATA_ENABLE ) {
-		/*imask &= ~INT_MASK_BUF_READY;*/
+	if (cmdat & CMD_DAT_CONT_DATA_ENABLE) {
+		/* imask &= ~INT_MASK_BUF_READY; */
 		imask &= ~INT_MASK_DATA_TRAN;
-		if ( cmdat & CMD_DAT_CONT_WRITE )
+		if (cmdat & CMD_DAT_CONT_WRITE)
 			imask &= ~INT_MASK_WRITE_OP_DONE;
-		if(test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events))
+		if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events))
 			imask &= ~INT_MASK_BUF_READY;
 	}
 
 	spin_lock_irqsave(&host->lock, flags);
 	host->imask = imask;
-	MMC_INT_MASK = host->imask;
+	writew(host->imask, host->base + MMC_REG_INT_MASK);
 	spin_unlock_irqrestore(&host->lock, flags);
 
 	dev_dbg(mmc_dev(host->mmc), "CMD%02d (0x%02x) mask set to 0x%04x\n",
@@ -395,14 +395,14 @@ static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request *
 	spin_lock_irqsave(&host->lock, flags);
 
 	host->pending_events &= ~(IMXMCI_PEND_WAIT_RESP_m | IMXMCI_PEND_DMA_END_m |
-			IMXMCI_PEND_DMA_DATA_m | IMXMCI_PEND_CPU_DATA_m);
+				  IMXMCI_PEND_DMA_DATA_m | IMXMCI_PEND_CPU_DATA_m);
 
 	host->imask = IMXMCI_INT_MASK_DEFAULT;
-	MMC_INT_MASK = host->imask;
+	writew(host->imask, host->base + MMC_REG_INT_MASK);
 
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	if(req && req->cmd)
+	if (req && req->cmd)
 		host->prev_cmd_code = req->cmd->opcode;
 
 	host->req = NULL;
@@ -416,17 +416,17 @@ static int imxmci_finish_data(struct imxmci_host *host, unsigned int stat)
 	struct mmc_data *data = host->data;
 	int data_error;
 
-	if(test_and_clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)){
+	if (test_and_clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) {
 		imx_dma_disable(host->dma);
 		dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents,
 			     host->dma_dir);
 	}
 
-	if ( stat & STATUS_ERR_MASK ) {
-		dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n",stat);
-		if(stat & (STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR))
+	if (stat & STATUS_ERR_MASK) {
+		dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n", stat);
+		if (stat & (STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR))
 			data->error = -EILSEQ;
-		else if(stat & STATUS_TIME_OUT_READ)
+		else if (stat & STATUS_TIME_OUT_READ)
 			data->error = -ETIMEDOUT;
 		else
 			data->error = -EIO;
@@ -445,7 +445,7 @@ static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat)
 {
 	struct mmc_command *cmd = host->cmd;
 	int i;
-	u32 a,b,c;
+	u32 a, b, c;
 	struct mmc_data *data = host->data;
 
 	if (!cmd)
@@ -461,18 +461,18 @@ static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat)
 		cmd->error = -EILSEQ;
 	}
 
-	if(cmd->flags & MMC_RSP_PRESENT) {
-		if(cmd->flags & MMC_RSP_136) {
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
 			for (i = 0; i < 4; i++) {
-				u32 a = MMC_RES_FIFO & 0xffff;
-				u32 b = MMC_RES_FIFO & 0xffff;
-				cmd->resp[i] = a<<16 | b;
+				a = readw(host->base + MMC_REG_RES_FIFO);
+				b = readw(host->base + MMC_REG_RES_FIFO);
+				cmd->resp[i] = a << 16 | b;
 			}
 		} else {
-			a = MMC_RES_FIFO & 0xffff;
-			b = MMC_RES_FIFO & 0xffff;
-			c = MMC_RES_FIFO & 0xffff;
-			cmd->resp[0] = a<<24 | b<<8 | c>>8;
+			a = readw(host->base + MMC_REG_RES_FIFO);
+			b = readw(host->base + MMC_REG_RES_FIFO);
+			c = readw(host->base + MMC_REG_RES_FIFO);
+			cmd->resp[0] = a << 24 | b << 8 | c >> 8;
 		}
 	}
 
@@ -484,36 +484,34 @@ static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat)
 
 			/* Wait for FIFO to be empty before starting DMA write */
 
-			stat = MMC_STATUS;
-			if(imxmci_busy_wait_for_status(host, &stat,
-				STATUS_APPL_BUFF_FE,
-				40, "imxmci_cmd_done DMA WR") < 0) {
+			stat = readw(host->base + MMC_REG_STATUS);
+			if (imxmci_busy_wait_for_status(host, &stat,
+							STATUS_APPL_BUFF_FE,
+							40, "imxmci_cmd_done DMA WR") < 0) {
 				cmd->error = -EIO;
 				imxmci_finish_data(host, stat);
-				if(host->req)
+				if (host->req)
 					imxmci_finish_request(host, host->req);
 				dev_warn(mmc_dev(host->mmc), "STATUS = 0x%04x\n",
-				       stat);
+					 stat);
 				return 0;
 			}
 
-			if(test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) {
+			if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events))
 				imx_dma_enable(host->dma);
-			}
 		}
 	} else {
 		struct mmc_request *req;
 		imxmci_stop_clock(host);
 		req = host->req;
 
-		if(data)
+		if (data)
 			imxmci_finish_data(host, stat);
 
-		if( req ) {
+		if (req)
 			imxmci_finish_request(host, req);
-		} else {
+		else
 			dev_warn(mmc_dev(host->mmc), "imxmci_cmd_done: no request to finish\n");
-		}
 	}
 
 	return 1;
@@ -535,11 +533,10 @@ static int imxmci_data_done(struct imxmci_host *host, unsigned int stat)
 	} else {
 		struct mmc_request *req;
 		req = host->req;
-		if( req ) {
+		if (req)
 			imxmci_finish_request(host, req);
-		} else {
+		else
 			dev_warn(mmc_dev(host->mmc), "imxmci_data_done: no request to finish\n");
-		}
 	}
 
 	return 1;
@@ -552,7 +549,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 	int trans_done = 0;
 	unsigned int stat = *pstat;
 
-	if(host->actual_bus_width != MMC_BUS_WIDTH_4)
+	if (host->actual_bus_width != MMC_BUS_WIDTH_4)
 		burst_len = 16;
 	else
 		burst_len = 64;
@@ -563,44 +560,44 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 
 	udelay(20);	/* required for clocks < 8MHz*/
 
-	if(host->dma_dir == DMA_FROM_DEVICE) {
+	if (host->dma_dir == DMA_FROM_DEVICE) {
 		imxmci_busy_wait_for_status(host, &stat,
-				STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE |
-				STATUS_TIME_OUT_READ,
-				50, "imxmci_cpu_driven_data read");
+					    STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE |
+					    STATUS_TIME_OUT_READ,
+					    50, "imxmci_cpu_driven_data read");
 
-		while((stat & (STATUS_APPL_BUFF_FF |  STATUS_DATA_TRANS_DONE)) &&
-		      !(stat & STATUS_TIME_OUT_READ) &&
-		      (host->data_cnt < 512)) {
+		while ((stat & (STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE)) &&
+		       !(stat & STATUS_TIME_OUT_READ) &&
+		       (host->data_cnt < 512)) {
 
 			udelay(20);	/* required for clocks < 8MHz*/
 
-			for(i = burst_len; i>=2 ; i-=2) {
+			for (i = burst_len; i >= 2 ; i -= 2) {
 				u16 data;
-				data = MMC_BUFFER_ACCESS;
+				data = readw(host->base + MMC_REG_BUFFER_ACCESS);
 				udelay(10);	/* required for clocks < 8MHz*/
-				if(host->data_cnt+2 <= host->dma_size) {
+				if (host->data_cnt+2 <= host->dma_size) {
 					*(host->data_ptr++) = data;
 				} else {
-					if(host->data_cnt < host->dma_size)
-						*(u8*)(host->data_ptr) = data;
+					if (host->data_cnt < host->dma_size)
+						*(u8 *)(host->data_ptr) = data;
 				}
 				host->data_cnt += 2;
 			}
 
-			stat = MMC_STATUS;
+			stat = readw(host->base + MMC_REG_STATUS);
 
 			dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n",
 				host->data_cnt, burst_len, stat);
 		}
 
-		if((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512))
+		if ((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512))
 			trans_done = 1;
 
-		if(host->dma_size & 0x1ff)
+		if (host->dma_size & 0x1ff)
 			stat &= ~STATUS_CRC_READ_ERR;
 
-		if(stat & STATUS_TIME_OUT_READ) {
+		if (stat & STATUS_TIME_OUT_READ) {
 			dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read timeout STATUS = 0x%x\n",
 				stat);
 			trans_done = -1;
@@ -608,12 +605,12 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 
 	} else {
 		imxmci_busy_wait_for_status(host, &stat,
-				STATUS_APPL_BUFF_FE,
-				20, "imxmci_cpu_driven_data write");
+					    STATUS_APPL_BUFF_FE,
+					    20, "imxmci_cpu_driven_data write");
 
-		while((stat & STATUS_APPL_BUFF_FE) &&
-		      (host->data_cnt < host->dma_size)) {
-			if(burst_len >= host->dma_size - host->data_cnt) {
+		while ((stat & STATUS_APPL_BUFF_FE) &&
+		       (host->data_cnt < host->dma_size)) {
+			if (burst_len >= host->dma_size - host->data_cnt) {
 				burst_len = host->dma_size - host->data_cnt;
 				host->data_cnt = host->dma_size;
 				trans_done = 1;
@@ -621,10 +618,10 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 				host->data_cnt += burst_len;
 			}
 
-			for(i = burst_len; i>0 ; i-=2)
-				MMC_BUFFER_ACCESS = *(host->data_ptr++);
+			for (i = burst_len; i > 0 ; i -= 2)
+				writew(*(host->data_ptr++), host->base + MMC_REG_BUFFER_ACCESS);
 
-			stat = MMC_STATUS;
+			stat = readw(host->base + MMC_REG_STATUS);
 
 			dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data write burst %d STATUS = 0x%x\n",
 				burst_len, stat);
@@ -639,7 +636,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 static void imxmci_dma_irq(int dma, void *devid)
 {
 	struct imxmci_host *host = devid;
-	uint32_t stat = MMC_STATUS;
+	u32 stat = readw(host->base + MMC_REG_STATUS);
 
 	atomic_set(&host->stuck_timeout, 0);
 	host->status_reg = stat;
@@ -650,10 +647,11 @@ static void imxmci_dma_irq(int dma, void *devid)
 static irqreturn_t imxmci_irq(int irq, void *devid)
 {
 	struct imxmci_host *host = devid;
-	uint32_t stat = MMC_STATUS;
+	u32 stat = readw(host->base + MMC_REG_STATUS);
 	int handled = 1;
 
-	MMC_INT_MASK = host->imask | INT_MASK_SDIO | INT_MASK_AUTO_CARD_DETECT;
+	writew(host->imask | INT_MASK_SDIO | INT_MASK_AUTO_CARD_DETECT,
+			host->base + MMC_REG_INT_MASK);
 
 	atomic_set(&host->stuck_timeout, 0);
 	host->status_reg = stat;
@@ -671,10 +669,10 @@ static void imxmci_tasklet_fnc(unsigned long data)
 	unsigned int data_dir_mask = 0;	/* STATUS_WR_CRC_ERROR_CODE_MASK */
 	int timeout = 0;
 
-	if(atomic_read(&host->stuck_timeout) > 4) {
+	if (atomic_read(&host->stuck_timeout) > 4) {
 		char *what;
 		timeout = 1;
-		stat = MMC_STATUS;
+		stat = readw(host->base + MMC_REG_STATUS);
 		host->status_reg = stat;
 		if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events))
 			if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events))
@@ -683,29 +681,37 @@ static void imxmci_tasklet_fnc(unsigned long data)
 				what = "RESP";
 		else
 			if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events))
-				if(test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events))
+				if (test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events))
 					what = "DATA";
 				else
 					what = "DMA";
 			else
 				what = "???";
 
-		dev_err(mmc_dev(host->mmc), "%s TIMEOUT, hardware stucked STATUS = 0x%04x IMASK = 0x%04x\n",
-		       what, stat, MMC_INT_MASK);
-		dev_err(mmc_dev(host->mmc), "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n",
-		       MMC_CMD_DAT_CONT, MMC_BLK_LEN, MMC_NOB, CCR(host->dma));
+		dev_err(mmc_dev(host->mmc),
+			"%s TIMEOUT, hardware stucked STATUS = 0x%04x IMASK = 0x%04x\n",
+			what, stat,
+			readw(host->base + MMC_REG_INT_MASK));
+		dev_err(mmc_dev(host->mmc),
+			"CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n",
+			readw(host->base + MMC_REG_CMD_DAT_CONT),
+			readw(host->base + MMC_REG_BLK_LEN),
+			readw(host->base + MMC_REG_NOB),
+			CCR(host->dma));
 		dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n",
-		       host->cmd?host->cmd->opcode:0, host->prev_cmd_code, 1<<host->actual_bus_width, host->dma_size);
+			host->cmd ? host->cmd->opcode : 0,
+			host->prev_cmd_code,
+			1 << host->actual_bus_width, host->dma_size);
 	}
 
-	if(!host->present || timeout)
+	if (!host->present || timeout)
 		host->status_reg = STATUS_TIME_OUT_RESP | STATUS_TIME_OUT_READ |
-				    STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR;
+			STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR;
 
-	if(test_bit(IMXMCI_PEND_IRQ_b, &host->pending_events) || timeout) {
+	if (test_bit(IMXMCI_PEND_IRQ_b, &host->pending_events) || timeout) {
 		clear_bit(IMXMCI_PEND_IRQ_b, &host->pending_events);
 
-		stat = MMC_STATUS;
+		stat = readw(host->base + MMC_REG_STATUS);
 		/*
 		 * This is not required in theory, but there is chance to miss some flag
 		 * which clears automatically by mask write, FreeScale original code keeps
@@ -713,63 +719,62 @@ static void imxmci_tasklet_fnc(unsigned long data)
 		 */
 		stat |= host->status_reg;
 
-		if(test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events))
+		if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events))
 			stat &= ~STATUS_CRC_READ_ERR;
 
-		if(test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) {
+		if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) {
 			imxmci_busy_wait_for_status(host, &stat,
-					STATUS_END_CMD_RESP | STATUS_ERR_MASK,
-					20, "imxmci_tasklet_fnc resp (ERRATUM #4)");
+						    STATUS_END_CMD_RESP | STATUS_ERR_MASK,
+						    20, "imxmci_tasklet_fnc resp (ERRATUM #4)");
 		}
 
-		if(stat & (STATUS_END_CMD_RESP | STATUS_ERR_MASK)) {
-			if(test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events))
+		if (stat & (STATUS_END_CMD_RESP | STATUS_ERR_MASK)) {
+			if (test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events))
 				imxmci_cmd_done(host, stat);
-			if(host->data && (stat & STATUS_ERR_MASK))
+			if (host->data && (stat & STATUS_ERR_MASK))
 				imxmci_data_done(host, stat);
 		}
 
-		if(test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) {
-			stat |= MMC_STATUS;
-			if(imxmci_cpu_driven_data(host, &stat)){
-				if(test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events))
+		if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) {
+			stat |= readw(host->base + MMC_REG_STATUS);
+			if (imxmci_cpu_driven_data(host, &stat)) {
+				if (test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events))
 					imxmci_cmd_done(host, stat);
 				atomic_clear_mask(IMXMCI_PEND_IRQ_m|IMXMCI_PEND_CPU_DATA_m,
-							&host->pending_events);
+						  &host->pending_events);
 				imxmci_data_done(host, stat);
 			}
 		}
 	}
 
-	if(test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events) &&
-	   !test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) {
+	if (test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events) &&
+	    !test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) {
 
-		stat = MMC_STATUS;
+		stat = readw(host->base + MMC_REG_STATUS);
 		/* Same as above */
 		stat |= host->status_reg;
 
-		if(host->dma_dir == DMA_TO_DEVICE) {
+		if (host->dma_dir == DMA_TO_DEVICE)
 			data_dir_mask = STATUS_WRITE_OP_DONE;
-		} else {
+		else
 			data_dir_mask = STATUS_DATA_TRANS_DONE;
-		}
 
-		if(stat & data_dir_mask) {
+		if (stat & data_dir_mask) {
 			clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
 			imxmci_data_done(host, stat);
 		}
 	}
 
-	if(test_and_clear_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events)) {
+	if (test_and_clear_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events)) {
 
-		if(host->cmd)
+		if (host->cmd)
 			imxmci_cmd_done(host, STATUS_TIME_OUT_RESP);
 
-		if(host->data)
+		if (host->data)
 			imxmci_data_done(host, STATUS_TIME_OUT_READ |
 					 STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR);
 
-		if(host->req)
+		if (host->req)
 			imxmci_finish_request(host, host->req);
 
 		mmc_detect_change(host->mmc, msecs_to_jiffies(100));
@@ -796,9 +801,8 @@ static void imxmci_request(struct mmc_host *mmc, struct mmc_request *req)
 		if (req->data->flags & MMC_DATA_WRITE)
 			cmdat |= CMD_DAT_CONT_WRITE;
 
-		if (req->data->flags & MMC_DATA_STREAM) {
+		if (req->data->flags & MMC_DATA_STREAM)
 			cmdat |= CMD_DAT_CONT_STREAM_BLOCK;
-		}
 	}
 
 	imxmci_start_cmd(host, req->cmd, cmdat);
@@ -811,36 +815,37 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct imxmci_host *host = mmc_priv(mmc);
 	int prescaler;
 
-	if( ios->bus_width==MMC_BUS_WIDTH_4 ) {
+	if (ios->bus_width == MMC_BUS_WIDTH_4) {
 		host->actual_bus_width = MMC_BUS_WIDTH_4;
 		imx_gpio_mode(PB11_PF_SD_DAT3);
-	}else{
+	} else {
 		host->actual_bus_width = MMC_BUS_WIDTH_1;
 		imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11);
 	}
 
-	if ( host->power_mode != ios->power_mode ) {
+	if (host->power_mode != ios->power_mode) {
 		switch (ios->power_mode) {
 		case MMC_POWER_OFF:
-        		break;
+			break;
 		case MMC_POWER_UP:
 			set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events);
-        		break;
+			break;
 		case MMC_POWER_ON:
-        		break;
+			break;
 		}
 		host->power_mode = ios->power_mode;
 	}
 
-	if ( ios->clock ) {
+	if (ios->clock) {
 		unsigned int clk;
+		u16 reg;
 
 		/* The prescaler is 5 for PERCLK2 equal to 96MHz
 		 * then 96MHz / 5 = 19.2 MHz
 		 */
 		clk = clk_get_rate(host->clk);
-		prescaler=(clk+(CLK_RATE*7)/8)/CLK_RATE;
-		switch(prescaler) {
+		prescaler = (clk + (CLK_RATE * 7) / 8) / CLK_RATE;
+		switch (prescaler) {
 		case 0:
 		case 1:	prescaler = 0;
 			break;
@@ -858,24 +863,29 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		dev_dbg(mmc_dev(host->mmc), "PERCLK2 %d MHz -> prescaler %d\n",
 			clk, prescaler);
 
-		for(clk=0; clk<8; clk++) {
+		for (clk = 0; clk < 8; clk++) {
 			int x;
-			x = CLK_RATE / (1<<clk);
-			if( x <= ios->clock)
+			x = CLK_RATE / (1 << clk);
+			if (x <= ios->clock)
 				break;
 		}
 
-		MMC_STR_STP_CLK |= STR_STP_CLK_ENABLE; /* enable controller */
+		/* enable controller */
+		reg = readw(host->base + MMC_REG_STR_STP_CLK);
+		writew(reg | STR_STP_CLK_ENABLE,
+				host->base + MMC_REG_STR_STP_CLK);
 
 		imxmci_stop_clock(host);
-		MMC_CLK_RATE = (prescaler<<3) | clk;
+		writew((prescaler << 3) | clk, host->base + MMC_REG_CLK_RATE);
 		/*
 		 * Under my understanding, clock should not be started there, because it would
 		 * initiate SDHC sequencer and send last or random command into card
 		 */
-		/*imxmci_start_clock(host);*/
+		/* imxmci_start_clock(host); */
 
-		dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE);
+		dev_dbg(mmc_dev(host->mmc),
+			"MMC_CLK_RATE: 0x%08x\n",
+			readw(host->base + MMC_REG_CLK_RATE));
 	} else {
 		imxmci_stop_clock(host);
 	}
@@ -915,10 +925,10 @@ static void imxmci_check_status(unsigned long data)
 		tasklet_schedule(&host->tasklet);
 	}
 
-	if(test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events) ||
-	   test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) {
+	if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events) ||
+	    test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) {
 		atomic_inc(&host->stuck_timeout);
-		if(atomic_read(&host->stuck_timeout) > 4)
+		if (atomic_read(&host->stuck_timeout) > 4)
 			tasklet_schedule(&host->tasklet);
 	} else {
 		atomic_set(&host->stuck_timeout, 0);
@@ -934,6 +944,7 @@ static int imxmci_probe(struct platform_device *pdev)
 	struct imxmci_host *host = NULL;
 	struct resource *r;
 	int ret = 0, irq;
+	u16 rev_no;
 
 	printk(KERN_INFO "i.MX mmc driver\n");
 
@@ -942,7 +953,8 @@ static int imxmci_probe(struct platform_device *pdev)
 	if (!r || irq < 0)
 		return -ENXIO;
 
-	if (!request_mem_region(r->start, 0x100, pdev->name))
+	r = request_mem_region(r->start, resource_size(r), pdev->name);
+	if (!r)
 		return -EBUSY;
 
 	mmc = mmc_alloc_host(sizeof(struct imxmci_host), &pdev->dev);
@@ -966,6 +978,12 @@ static int imxmci_probe(struct platform_device *pdev)
 	mmc->max_blk_count = 65535;
 
 	host = mmc_priv(mmc);
+	host->base = ioremap(r->start, resource_size(r));
+	if (!host->base) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
 	host->mmc = mmc;
 	host->dma_allocated = 0;
 	host->pdata = pdev->dev.platform_data;
@@ -993,18 +1011,20 @@ static int imxmci_probe(struct platform_device *pdev)
 	imx_gpio_mode(PB12_PF_SD_CLK);
 	imx_gpio_mode(PB13_PF_SD_CMD);
 
-	imxmci_softreset();
+	imxmci_softreset(host);
 
-	if ( MMC_REV_NO != 0x390 ) {
+	rev_no = readw(host->base + MMC_REG_REV_NO);
+	if (rev_no != 0x390) {
 		dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n",
-		        MMC_REV_NO);
+			readw(host->base + MMC_REG_REV_NO));
 		goto out;
 	}
 
-	MMC_READ_TO = 0x2db4; /* recommended in data sheet */
+	/* recommended in data sheet */
+	writew(0x2db4, host->base + MMC_REG_READ_TO);
 
 	host->imask = IMXMCI_INT_MASK_DEFAULT;
-	MMC_INT_MASK = host->imask;
+	writew(host->imask, host->base + MMC_REG_INT_MASK);
 
 	host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW);
 	if(host->dma < 0) {
@@ -1012,7 +1032,7 @@ static int imxmci_probe(struct platform_device *pdev)
 		ret = -EBUSY;
 		goto out;
 	}
-	host->dma_allocated=1;
+	host->dma_allocated = 1;
 	imx_dma_setup_handlers(host->dma, imxmci_dma_irq, NULL, host);
 
 	tasklet_init(&host->tasklet, imxmci_tasklet_fnc, (unsigned long)host);
@@ -1032,7 +1052,7 @@ static int imxmci_probe(struct platform_device *pdev)
 	host->timer.data = (unsigned long)host;
 	host->timer.function = imxmci_check_status;
 	add_timer(&host->timer);
-	mod_timer(&host->timer, jiffies + (HZ>>1));
+	mod_timer(&host->timer, jiffies + (HZ >> 1));
 
 	platform_set_drvdata(pdev, mmc);
 
@@ -1042,18 +1062,20 @@ static int imxmci_probe(struct platform_device *pdev)
 
 out:
 	if (host) {
-		if(host->dma_allocated){
+		if (host->dma_allocated) {
 			imx_dma_free(host->dma);
-			host->dma_allocated=0;
+			host->dma_allocated = 0;
 		}
 		if (host->clk) {
 			clk_disable(host->clk);
 			clk_put(host->clk);
 		}
+		if (host->base)
+			iounmap(host->base);
 	}
 	if (mmc)
 		mmc_free_host(mmc);
-	release_mem_region(r->start, 0x100);
+	release_mem_region(r->start, resource_size(r));
 	return ret;
 }
 
@@ -1072,9 +1094,10 @@ static int imxmci_remove(struct platform_device *pdev)
 		mmc_remove_host(mmc);
 
 		free_irq(host->irq, host);
-		if(host->dma_allocated){
+		iounmap(host->base);
+		if (host->dma_allocated) {
 			imx_dma_free(host->dma);
-			host->dma_allocated=0;
+			host->dma_allocated = 0;
 		}
 
 		tasklet_kill(&host->tasklet);
@@ -1082,7 +1105,7 @@ static int imxmci_remove(struct platform_device *pdev)
 		clk_disable(host->clk);
 		clk_put(host->clk);
 
-		release_mem_region(host->res->start, 0x100);
+		release_mem_region(host->res->start, resource_size(host->res));
 
 		mmc_free_host(mmc);
 	}
@@ -1109,7 +1132,7 @@ static int imxmci_resume(struct platform_device *dev)
 
 	if (mmc) {
 		host = mmc_priv(mmc);
-		if(host)
+		if (host)
 			set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events);
 		ret = mmc_resume_host(mmc);
 	}
diff --git a/drivers/mmc/host/imxmmc.h b/drivers/mmc/host/imxmmc.h
index e5339e334dbb..09d5d4ee3a77 100644
--- a/drivers/mmc/host/imxmmc.h
+++ b/drivers/mmc/host/imxmmc.h
@@ -1,24 +1,21 @@
+#define MMC_REG_STR_STP_CLK		0x00
+#define MMC_REG_STATUS			0x04
+#define MMC_REG_CLK_RATE		0x08
+#define MMC_REG_CMD_DAT_CONT		0x0C
+#define MMC_REG_RES_TO			0x10
+#define MMC_REG_READ_TO			0x14
+#define MMC_REG_BLK_LEN			0x18
+#define MMC_REG_NOB			0x1C
+#define MMC_REG_REV_NO			0x20
+#define MMC_REG_INT_MASK		0x24
+#define MMC_REG_CMD			0x28
+#define MMC_REG_ARGH			0x2C
+#define MMC_REG_ARGL			0x30
+#define MMC_REG_RES_FIFO		0x34
+#define MMC_REG_BUFFER_ACCESS		0x38
 
-# define __REG16(x)	(*((volatile u16 *)IO_ADDRESS(x)))
-
-#define MMC_STR_STP_CLK  __REG16(IMX_MMC_BASE + 0x00)
-#define MMC_STATUS       __REG16(IMX_MMC_BASE + 0x04)
-#define MMC_CLK_RATE     __REG16(IMX_MMC_BASE + 0x08)
-#define MMC_CMD_DAT_CONT __REG16(IMX_MMC_BASE + 0x0C)
-#define MMC_RES_TO       __REG16(IMX_MMC_BASE + 0x10)
-#define MMC_READ_TO      __REG16(IMX_MMC_BASE + 0x14)
-#define MMC_BLK_LEN      __REG16(IMX_MMC_BASE + 0x18)
-#define MMC_NOB          __REG16(IMX_MMC_BASE + 0x1C)
-#define MMC_REV_NO       __REG16(IMX_MMC_BASE + 0x20)
-#define MMC_INT_MASK     __REG16(IMX_MMC_BASE + 0x24)
-#define MMC_CMD          __REG16(IMX_MMC_BASE + 0x28)
-#define MMC_ARGH         __REG16(IMX_MMC_BASE + 0x2C)
-#define MMC_ARGL         __REG16(IMX_MMC_BASE + 0x30)
-#define MMC_RES_FIFO     __REG16(IMX_MMC_BASE + 0x34)
-#define MMC_BUFFER_ACCESS __REG16(IMX_MMC_BASE + 0x38)
-#define MMC_BUFFER_ACCESS_OFS 0x38
-
-
+#define STR_STP_CLK_IPG_CLK_GATE_DIS    (1<<15)
+#define STR_STP_CLK_IPG_PERCLK_GATE_DIS (1<<14)
 #define STR_STP_CLK_ENDIAN              (1<<5)
 #define STR_STP_CLK_RESET               (1<<3)
 #define STR_STP_CLK_ENABLE              (1<<2)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 2fadf323c696..1bcbdd6763ac 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -500,7 +500,7 @@ static int mmci_probe(struct amba_device *dev, void *id)
 	}
 
 	host = mmc_priv(mmc);
-	host->clk = clk_get(&dev->dev, "MCLK");
+	host->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(host->clk)) {
 		ret = PTR_ERR(host->clk);
 		host->clk = NULL;
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 1b9fc3c6b875..67d7b7fef084 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1015,7 +1015,7 @@ static int mmc_omap_get_dma_channel(struct mmc_omap_host *host, struct mmc_data
 	}
 
 	if (is_read) {
-		if (host->id == 1) {
+		if (host->id == 0) {
 			sync_dev = OMAP_DMA_MMC_RX;
 			dma_dev_name = "MMC1 read";
 		} else {
@@ -1023,7 +1023,7 @@ static int mmc_omap_get_dma_channel(struct mmc_omap_host *host, struct mmc_data
 			dma_dev_name = "MMC2 read";
 		}
 	} else {
-		if (host->id == 1) {
+		if (host->id == 0) {
 			sync_dev = OMAP_DMA_MMC_TX;
 			dma_dev_name = "MMC1 write";
 		} else {
@@ -1317,7 +1317,7 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
 	host->slots[id] = slot;
 
 	mmc->caps = 0;
-	if (host->pdata->conf.wire4)
+	if (host->pdata->slots[id].wires >= 4)
 		mmc->caps |= MMC_CAP_4_BIT_DATA;
 
 	mmc->ops = &mmc_omap_ops;
@@ -1451,6 +1451,7 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
 	host->irq = irq;
 
 	host->use_dma = 1;
+	host->dev->dma_mask = &pdata->dma_mask;
 	host->dma_ch = -1;
 
 	host->irq = irq;
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index ebfaa9960939..f88cc7406354 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -26,11 +26,12 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/mmc/host.h>
+#include <linux/io.h>
 
-#include <asm/dma.h>
-#include <asm/io.h>
 #include <asm/sizes.h>
 
+#include <mach/dma.h>
+#include <mach/hardware.h>
 #include <mach/pxa-regs.h>
 #include <mach/mmc.h>
 
@@ -533,7 +534,7 @@ static int pxamci_probe(struct platform_device *pdev)
 	host->pdata = pdev->dev.platform_data;
 	host->clkrt = CLKRT_OFF;
 
-	host->clk = clk_get(&pdev->dev, "MMCCLK");
+	host->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(host->clk)) {
 		ret = PTR_ERR(host->clk);
 		host->clk = NULL;
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 3b2085b57769..fcc98a4cce3c 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -25,7 +25,7 @@
 #include <mach/regs-sdi.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/mci.h>
+#include <plat/mci.h>
 
 #include "s3cmci.h"
 
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 76a76751da36..6659b2275c0c 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -37,9 +37,9 @@
 #define	OPCODE_NORM_READ	0x03	/* Read data bytes (low frequency) */
 #define	OPCODE_FAST_READ	0x0b	/* Read data bytes (high frequency) */
 #define	OPCODE_PP		0x02	/* Page program (up to 256 bytes) */
-#define	OPCODE_BE_4K 		0x20	/* Erase 4KiB block */
+#define	OPCODE_BE_4K		0x20	/* Erase 4KiB block */
 #define	OPCODE_BE_32K		0x52	/* Erase 32KiB block */
-#define	OPCODE_BE		0xc7	/* Erase whole flash block */
+#define	OPCODE_CHIP_ERASE	0xc7	/* Erase whole flash chip */
 #define	OPCODE_SE		0xd8	/* Sector erase (usually 64KiB) */
 #define	OPCODE_RDID		0x9f	/* Read JEDEC ID */
 
@@ -167,7 +167,7 @@ static int wait_till_ready(struct m25p *flash)
  *
  * Returns 0 if successful, non-zero otherwise.
  */
-static int erase_block(struct m25p *flash)
+static int erase_chip(struct m25p *flash)
 {
 	DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB\n",
 			flash->spi->dev.bus_id, __func__,
@@ -181,7 +181,7 @@ static int erase_block(struct m25p *flash)
 	write_enable(flash);
 
 	/* Set up command buffer. */
-	flash->command[0] = OPCODE_BE;
+	flash->command[0] = OPCODE_CHIP_ERASE;
 
 	spi_write(flash->spi, flash->command, 1);
 
@@ -250,15 +250,18 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
 
 	mutex_lock(&flash->lock);
 
-	/* REVISIT in some cases we could speed up erasing large regions
-	 * by using OPCODE_SE instead of OPCODE_BE_4K
-	 */
-
-	/* now erase those sectors */
-	if (len == flash->mtd.size && erase_block(flash)) {
+	/* whole-chip erase? */
+	if (len == flash->mtd.size && erase_chip(flash)) {
 		instr->state = MTD_ERASE_FAILED;
 		mutex_unlock(&flash->lock);
 		return -EIO;
+
+	/* REVISIT in some cases we could speed up erasing large regions
+	 * by using OPCODE_SE instead of OPCODE_BE_4K.  We may have set up
+	 * to use "small sector erase", but that's not always optimal.
+	 */
+
+	/* "sector"-at-a-time erase */
 	} else {
 		while (len) {
 			if (erase_sector(flash, addr)) {
@@ -574,10 +577,11 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 	for (tmp = 0, info = m25p_data;
 			tmp < ARRAY_SIZE(m25p_data);
 			tmp++, info++) {
-		if (info->jedec_id == jedec)
-			if (ext_jedec != 0 && info->ext_id != ext_jedec)
+		if (info->jedec_id == jedec) {
+			if (info->ext_id != 0 && info->ext_id != ext_jedec)
 				continue;
 			return info;
+		}
 	}
 	dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
 	return NULL;
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
index 3aa018c092f8..42969fe051b2 100644
--- a/drivers/mtd/maps/dc21285.c
+++ b/drivers/mtd/maps/dc21285.c
@@ -32,16 +32,15 @@ static struct mtd_info *dc21285_mtd;
  */
 static void nw_en_write(void)
 {
-	extern spinlock_t gpio_lock;
 	unsigned long flags;
 
 	/*
 	 * we want to write a bit pattern XXX1 to Xilinx to enable
 	 * the write gate, which will be open for about the next 2ms.
 	 */
-	spin_lock_irqsave(&gpio_lock, flags);
-	cpld_modify(1, 1);
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
 
 	/*
 	 * let the ISA bus to catch on...
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index dcdb1f17577d..3ea1de9be720 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -170,7 +170,7 @@ static int ixp2000_flash_probe(struct platform_device *dev)
 		err = -ENOMEM;
 		goto Error;
 	}
-	memzero(info, sizeof(struct ixp2000_flash_info));
+	memset(info, 0, sizeof(struct ixp2000_flash_info));
 
 	platform_set_drvdata(dev, info);
 
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index 9c7a5fbd4e51..16555cbeaea4 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -201,7 +201,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 		err = -ENOMEM;
 		goto Error;
 	}
-	memzero(info, sizeof(struct ixp4xx_flash_info));
+	memset(info, 0, sizeof(struct ixp4xx_flash_info));
 
 	platform_set_drvdata(dev, info);
 
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 42d844f8f6bf..dfbf3f270cea 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/concat.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #define MAX_RESOURCES		4
 
@@ -27,7 +27,6 @@ struct physmap_flash_info {
 	struct mtd_info		*mtd[MAX_RESOURCES];
 	struct mtd_info		*cmtd;
 	struct map_info		map[MAX_RESOURCES];
-	struct resource		*res;
 #ifdef CONFIG_MTD_PARTITIONS
 	int			nr_parts;
 	struct mtd_partition	*parts;
@@ -70,16 +69,7 @@ static int physmap_flash_remove(struct platform_device *dev)
 #endif
 			map_destroy(info->mtd[i]);
 		}
-
-		if (info->map[i].virt != NULL)
-			iounmap(info->map[i].virt);
-	}
-
-	if (info->res != NULL) {
-		release_resource(info->res);
-		kfree(info->res);
 	}
-
 	return 0;
 }
 
@@ -101,7 +91,8 @@ static int physmap_flash_probe(struct platform_device *dev)
 	if (physmap_data == NULL)
 		return -ENODEV;
 
-	info = kzalloc(sizeof(struct physmap_flash_info), GFP_KERNEL);
+	info = devm_kzalloc(&dev->dev, sizeof(struct physmap_flash_info),
+			    GFP_KERNEL);
 	if (info == NULL) {
 		err = -ENOMEM;
 		goto err_out;
@@ -114,10 +105,10 @@ static int physmap_flash_probe(struct platform_device *dev)
 		       (unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1),
 		       (unsigned long long)dev->resource[i].start);
 
-		info->res = request_mem_region(dev->resource[i].start,
-					       dev->resource[i].end - dev->resource[i].start + 1,
-					       dev->dev.bus_id);
-		if (info->res == NULL) {
+		if (!devm_request_mem_region(&dev->dev,
+			dev->resource[i].start,
+			dev->resource[i].end - dev->resource[i].start + 1,
+			dev->dev.bus_id)) {
 			dev_err(&dev->dev, "Could not reserve memory region\n");
 			err = -ENOMEM;
 			goto err_out;
@@ -129,7 +120,8 @@ static int physmap_flash_probe(struct platform_device *dev)
 		info->map[i].bankwidth = physmap_data->width;
 		info->map[i].set_vpp = physmap_data->set_vpp;
 
-		info->map[i].virt = ioremap(info->map[i].phys, info->map[i].size);
+		info->map[i].virt = devm_ioremap(&dev->dev, info->map[i].phys,
+						 info->map[i].size);
 		if (info->map[i].virt == NULL) {
 			dev_err(&dev->dev, "Failed to ioremap flash region\n");
 			err = EIO;
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 1c2e9450d663..f8ae0400c49c 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -408,7 +408,7 @@ config MTD_NAND_FSL_UPM
 
 config MTD_NAND_MXC
 	tristate "MXC NAND support"
-	depends on ARCH_MX2
+	depends on ARCH_MX2 || ARCH_MX3
 	help
 	  This enables the driver for the NAND flash controller on the
 	  MXC processors.
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 024e3fffd4bb..a83192f80eba 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -163,9 +163,11 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun,
 	ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0);
 
 #ifdef CONFIG_MTD_OF_PARTS
-	if (ret == 0)
-		ret = of_mtd_parse_partitions(fun->dev, &fun->mtd,
-					      flash_np, &fun->parts);
+	if (ret == 0) {
+		ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts);
+		if (ret < 0)
+			goto err;
+	}
 #endif
 	if (ret > 0)
 		ret = add_mtd_partitions(&fun->mtd, fun->parts, ret);
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 75c899039023..9bd6c9ac8443 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -141,6 +141,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev,
 	}
 
 	lpcctl = pci_resource_start(pdev, 0);
+	pci_dev_put(pdev);
 
 	if (!request_region(lpcctl, 4, driver_name)) {
 		err = -EBUSY;
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 64b3be1ea0a3..fc4144495610 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -269,6 +269,7 @@ static struct pxa3xx_nand_timing stm2GbX16_timing = {
 
 static struct pxa3xx_nand_flash stm2GbX16 = {
 	.timing = &stm2GbX16_timing,
+	.cmdset	= &largepage_cmdset,
 	.page_per_block = 64,
 	.page_size = 2048,
 	.flash_width = 16,
@@ -1079,7 +1080,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
 	this = &info->nand_chip;
 	mtd->priv = info;
 
-	info->clk = clk_get(&pdev->dev, "NANDCLK");
+	info->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(info->clk)) {
 		dev_err(&pdev->dev, "failed to get nand clock\n");
 		ret = PTR_ERR(info->clk);
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 556139ed1fdf..8e375d5fe231 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -45,8 +45,8 @@
 
 #include <asm/io.h>
 
-#include <asm/plat-s3c/regs-nand.h>
-#include <asm/plat-s3c/nand.h>
+#include <plat/regs-nand.h>
+#include <plat/nand.h>
 
 #ifdef CONFIG_MTD_NAND_S3C2410_HWECC
 static int hardware_ecc = 1;
@@ -818,7 +818,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 		goto exit_error;
 	}
 
-	memzero(info, sizeof(*info));
+	memset(info, 0, sizeof(*info));
 	platform_set_drvdata(pdev, info);
 
 	spin_lock_init(&info->controller.lock);
@@ -883,7 +883,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 		goto exit_error;
 	}
 
-	memzero(info->mtds, size);
+	memset(info->mtds, 0, size);
 
 	/* initialise all possible chips */
 
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index e39b21d3e168..d1e0b8e7224b 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -32,19 +32,18 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/gpmc.h>
-#include <asm/arch/onenand.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pm.h>
+#include <mach/gpmc.h>
+#include <mach/onenand.h>
+#include <mach/gpio.h>
+#include <mach/pm.h>
 
-#include <linux/dma-mapping.h>
-#include <asm/dma-mapping.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #define DRIVER_NAME "omap2-onenand"
 
@@ -150,7 +149,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
 
 		INIT_COMPLETION(c->irq_done);
 		if (c->gpio_irq) {
-			result = omap_get_gpio_datain(c->gpio_irq);
+			result = gpio_get_value(c->gpio_irq);
 			if (result == -1) {
 				ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
 				intr = read_reg(c, ONENAND_REG_INTERRUPT);
@@ -635,9 +634,9 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 				"OneNAND\n", c->gpio_irq);
 			goto err_iounmap;
 	}
-	omap_set_gpio_direction(c->gpio_irq, 1);
+	gpio_direction_input(c->gpio_irq);
 
-	if ((r = request_irq(OMAP_GPIO_IRQ(c->gpio_irq),
+	if ((r = request_irq(gpio_to_irq(c->gpio_irq),
 			     omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
 			     pdev->dev.driver->name, c)) < 0)
 		goto err_release_gpio;
@@ -724,7 +723,7 @@ err_release_dma:
 	if (c->dma_channel != -1)
 		omap_free_dma(c->dma_channel);
 	if (c->gpio_irq)
-		free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c);
+		free_irq(gpio_to_irq(c->gpio_irq), c);
 err_release_gpio:
 	if (c->gpio_irq)
 		omap_free_gpio(c->gpio_irq);
@@ -761,7 +760,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
 	omap2_onenand_shutdown(pdev);
 	platform_set_drvdata(pdev, NULL);
 	if (c->gpio_irq) {
-		free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c);
+		free_irq(gpio_to_irq(c->gpio_irq), c);
 		omap_free_gpio(c->gpio_irq);
 	}
 	iounmap(c->onenand.base);
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index e04bcf1dff87..d8966bae0e0b 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -1022,7 +1022,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 	}
 
 	/*
-	 * OK, now the LEB is locked and we can safely start moving iy. Since
+	 * OK, now the LEB is locked and we can safely start moving it. Since
 	 * this function utilizes thie @ubi->peb1_buf buffer which is shared
 	 * with some other functions, so lock the buffer by taking the
 	 * @ubi->buf_mutex.
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 4f2daa5bbecf..41d47e1cf15c 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -320,7 +320,7 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
 	}
 
 	err = ubi_io_read_data(ubi, buf, pnum, 0, len);
-	if (err && err != UBI_IO_BITFLIPS)
+	if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
 		goto out_free_buf;
 
 	data_crc = be32_to_cpu(vid_hdr->data_crc);
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 05d70937b543..dcb6dac1dc54 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -1396,7 +1396,8 @@ int ubi_thread(void *u)
 				ubi_msg("%s: %d consecutive failures",
 					ubi->bgt_name, WL_MAX_FAILURES);
 				ubi_ro_mode(ubi);
-				break;
+				ubi->thread_enabled = 0;
+				continue;
 			}
 		} else
 			failures = 0;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 11f143f4adf6..231eeaf1d552 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1825,9 +1825,10 @@ config FEC2
 
 config FEC_MPC52xx
 	tristate "MPC52xx FEC driver"
-	depends on PPC_MPC52xx && PPC_BESTCOMM_FEC
+	depends on PPC_MPC52xx && PPC_BESTCOMM
 	select CRC32
 	select PHYLIB
+	select PPC_BESTCOMM_FEC
 	---help---
 	  This option enables support for the MPC5200's on-chip
 	  Fast Ethernet Controller
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index f19acf8b9220..017383ad5ec6 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -114,7 +114,7 @@ obj-$(CONFIG_EL2) += 3c503.o 8390p.o
 obj-$(CONFIG_NE2000) += ne.o 8390p.o
 obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
 obj-$(CONFIG_HPLAN) += hp.o 8390p.o
-obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o
+obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
 obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
 obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
 obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index d07e3f148951..a1a3d0e5d2b4 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -3144,6 +3144,28 @@ bnx2_has_work(struct bnx2_napi *bnapi)
 	return 0;
 }
 
+static void
+bnx2_chk_missed_msi(struct bnx2 *bp)
+{
+	struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+	u32 msi_ctrl;
+
+	if (bnx2_has_work(bnapi)) {
+		msi_ctrl = REG_RD(bp, BNX2_PCICFG_MSI_CONTROL);
+		if (!(msi_ctrl & BNX2_PCICFG_MSI_CONTROL_ENABLE))
+			return;
+
+		if (bnapi->last_status_idx == bp->idle_chk_status_idx) {
+			REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl &
+			       ~BNX2_PCICFG_MSI_CONTROL_ENABLE);
+			REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl);
+			bnx2_msi(bp->irq_tbl[0].vector, bnapi);
+		}
+	}
+
+	bp->idle_chk_status_idx = bnapi->last_status_idx;
+}
+
 static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi)
 {
 	struct status_block *sblk = bnapi->status_blk.msi;
@@ -3218,14 +3240,15 @@ static int bnx2_poll(struct napi_struct *napi, int budget)
 
 		work_done = bnx2_poll_work(bp, bnapi, work_done, budget);
 
-		if (unlikely(work_done >= budget))
-			break;
-
 		/* bnapi->last_status_idx is used below to tell the hw how
 		 * much work has been processed, so we must read it before
 		 * checking for more work.
 		 */
 		bnapi->last_status_idx = sblk->status_idx;
+
+		if (unlikely(work_done >= budget))
+			break;
+
 		rmb();
 		if (likely(!bnx2_has_work(bnapi))) {
 			netif_rx_complete(bp->dev, napi);
@@ -4570,6 +4593,8 @@ bnx2_init_chip(struct bnx2 *bp)
 	for (i = 0; i < BNX2_MAX_MSIX_VEC; i++)
 		bp->bnx2_napi[i].last_status_idx = 0;
 
+	bp->idle_chk_status_idx = 0xffff;
+
 	bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE;
 
 	/* Set up how to generate a link change interrupt. */
@@ -5718,6 +5743,10 @@ bnx2_timer(unsigned long data)
 	if (atomic_read(&bp->intr_sem) != 0)
 		goto bnx2_restart_timer;
 
+	if ((bp->flags & (BNX2_FLAG_USING_MSI | BNX2_FLAG_ONE_SHOT_MSI)) ==
+	     BNX2_FLAG_USING_MSI)
+		bnx2_chk_missed_msi(bp);
+
 	bnx2_send_heart_beat(bp);
 
 	bp->stats_blk->stat_FwRxDrop =
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 617d95340160..0b032c3c7b61 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -378,6 +378,9 @@ struct l2_fhdr {
  *  pci_config_l definition
  *  offset: 0000
  */
+#define BNX2_PCICFG_MSI_CONTROL				0x00000058
+#define BNX2_PCICFG_MSI_CONTROL_ENABLE			 (1L<<16)
+
 #define BNX2_PCICFG_MISC_CONFIG				0x00000068
 #define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP	 (1L<<2)
 #define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP	 (1L<<3)
@@ -6863,6 +6866,9 @@ struct bnx2 {
 
 	u8			num_tx_rings;
 	u8			num_rx_rings;
+
+	u32			idle_chk_status_idx;
+
 };
 
 #define REG_RD(bp, offset)					\
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index d6c7d2aa761b..7092df50ff78 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1035,10 +1035,6 @@ MODULE_PARM_DESC(copybreak, "Receive copy threshold");
  *	@pdev: the PCI device that received the packet
  *	@fl: the SGE free list holding the packet
  *	@len: the actual packet length, excluding any SGE padding
- *	@dma_pad: padding at beginning of buffer left by SGE DMA
- *	@skb_pad: padding to be used if the packet is copied
- *	@copy_thres: length threshold under which a packet should be copied
- *	@drop_thres: # of remaining buffers before we start dropping packets
  *
  *	Get the next packet from a free list and complete setup of the
  *	sk_buff.  If the packet is small we make a copy and recycle the
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 7107620f615d..0b729f7d91fc 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -170,11 +170,7 @@ static char version[] __initdata =
 /* The cs8900 has 4 IRQ pins, software selectable. cs8900_irq_map maps
    them to system IRQ numbers. This mapping is card specific and is set to
    the configuration of the Cirrus Eval board for this chip. */
-#ifdef CONFIG_ARCH_CLPS7500
-static unsigned int netcard_portlist[] __used __initdata =
-   { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
-static unsigned int cs8900_irq_map[] = {12,0,0,0};
-#elif defined(CONFIG_SH_HICOSH4)
+#if defined(CONFIG_SH_HICOSH4)
 static unsigned int netcard_portlist[] __used __initdata =
    { 0x0300, 0};
 static unsigned int cs8900_irq_map[] = {1,0,0,0};
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 523b9716a543..d115a6d30f29 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1893,12 +1893,17 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 		ctrl |= E1000_CTRL_PHY_RST;
 	}
 	ret_val = e1000_acquire_swflag_ich8lan(hw);
+	/* Whether or not the swflag was acquired, we need to reset the part */
 	hw_dbg(hw, "Issuing a global reset to ich8lan");
 	ew32(CTRL, (ctrl | E1000_CTRL_RST));
 	msleep(20);
 
-	/* release the swflag because it is not reset by hardware reset */
-	e1000_release_swflag_ich8lan(hw);
+	if (!ret_val) {
+		/* release the swflag because it is not reset by
+		 * hardware reset
+		 */
+		e1000_release_swflag_ich8lan(hw);
+	}
 
 	ret_val = e1000e_get_auto_rd_done(hw);
 	if (ret_val) {
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 91795f78c3e4..122539a0e1fe 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -345,7 +345,6 @@ no_buffers:
 /**
  * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
  * @adapter: address of board private structure
- * @rx_ring: pointer to receive ring structure
  * @cleaned_count: number of buffers to allocate this pass
  **/
 
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index e1b441effbbe..c414554ac321 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -568,6 +568,17 @@ static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
 	return erxrdpt;
 }
 
+/*
+ * Calculate wrap around when reading beyond the end of the RX buffer
+ */
+static u16 rx_packet_start(u16 ptr)
+{
+	if (ptr + RSV_SIZE > RXEND_INIT)
+		return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1);
+	else
+		return ptr + RSV_SIZE;
+}
+
 static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
 {
 	u16 erxrdpt;
@@ -938,8 +949,9 @@ static void enc28j60_hw_rx(struct net_device *ndev)
 			skb->dev = ndev;
 			skb_reserve(skb, NET_IP_ALIGN);
 			/* copy the packet from the receive buffer */
-			enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv),
-					len, skb_put(skb, len));
+			enc28j60_mem_read(priv,
+				rx_packet_start(priv->next_pk_ptr),
+				len, skb_put(skb, len));
 			if (netif_msg_pktdata(priv))
 				dump_packet(__func__, skb->len, skb->data);
 			skb->protocol = eth_type_trans(skb, ndev);
diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c
index fbbd3e660c27..c01e290d09d2 100644
--- a/drivers/net/hp-plus.c
+++ b/drivers/net/hp-plus.c
@@ -230,7 +230,7 @@ static int __init hpp_probe1(struct net_device *dev, int ioaddr)
 	dev->open = &hpp_open;
 	dev->stop = &hpp_close;
 #ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = ei_poll;
+	dev->poll_controller = eip_poll;
 #endif
 
 	ei_status.name = name;
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 1cbae85b1426..20d27e622ec1 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1980,7 +1980,6 @@ static void igb_configure_rx(struct igb_adapter *adapter)
 
 /**
  * igb_free_tx_resources - Free Tx Resources per Queue
- * @adapter: board private structure
  * @tx_ring: Tx descriptor ring for a specific queue
  *
  * Free all transmit software resources
@@ -2033,7 +2032,6 @@ static void igb_unmap_and_free_tx_resource(struct igb_adapter *adapter,
 
 /**
  * igb_clean_tx_ring - Free Tx Buffers
- * @adapter: board private structure
  * @tx_ring: ring to be cleaned
  **/
 static void igb_clean_tx_ring(struct igb_ring *tx_ring)
@@ -2080,7 +2078,6 @@ static void igb_clean_all_tx_rings(struct igb_adapter *adapter)
 
 /**
  * igb_free_rx_resources - Free Rx Resources
- * @adapter: board private structure
  * @rx_ring: ring to clean the resources from
  *
  * Free all receive software resources
@@ -2120,7 +2117,6 @@ static void igb_free_all_rx_resources(struct igb_adapter *adapter)
 
 /**
  * igb_clean_rx_ring - Free Rx Buffers per Queue
- * @adapter: board private structure
  * @rx_ring: ring to free buffers from
  **/
 static void igb_clean_rx_ring(struct igb_ring *rx_ring)
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index ba445133f3eb..0e081292f4f7 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -22,8 +22,9 @@
 #include <net/irda/wrapper.h>
 #include <net/irda/irda_device.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 #include <mach/irda.h>
+#include <mach/hardware.h>
 #include <mach/pxa-regs.h>
 #include <mach/regs-uart.h>
 
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index a95188948de7..0813b5295f52 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -36,7 +36,7 @@
 #include <net/irda/irda_device.h>
 
 #include <asm/irq.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
 #include <mach/hardware.h>
 #include <asm/mach/irda.h>
 
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 36f2bb666bf7..5236f633ee36 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1320,7 +1320,6 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter)
  * ixgbe_intr - legacy mode Interrupt Handler
  * @irq: interrupt number
  * @data: pointer to a network interface device structure
- * @pt_regs: CPU registers structure
  **/
 static irqreturn_t ixgbe_intr(int irq, void *data)
 {
@@ -2330,7 +2329,7 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
  * Once we know the feature-set enabled for the device, we'll cache
  * the register offset the descriptor ring is assigned to.
  **/
-static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
+static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
 {
 	int feature_mask = 0, rss_i;
 	int i, txr_idx, rxr_idx;
@@ -2367,7 +2366,7 @@ static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
  * number of queues at compile-time.  The polling_netdev array is
  * intended for Multiqueue, but should work fine with a single queue.
  **/
-static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
+static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
 {
 	int i;
 
@@ -2408,8 +2407,7 @@ err_tx_ring_allocation:
  * Attempt to configure the interrupts using the best available
  * capabilities of the hardware and the kernel.
  **/
-static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter
-                                                    *adapter)
+static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
 {
 	int err = 0;
 	int vector, v_budget;
@@ -2501,7 +2499,7 @@ static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter)
  * - Hardware queue count (num_*_queues)
  *   - defined by miscellaneous hardware support/features (RSS, etc.)
  **/
-static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
+static int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
 {
 	int err;
 
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 42394505bb50..590039cbb146 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -70,6 +70,9 @@ static void macvlan_broadcast(struct sk_buff *skb,
 	struct sk_buff *nskb;
 	unsigned int i;
 
+	if (skb->protocol == htons(ETH_P_PAUSE))
+		return;
+
 	for (i = 0; i < MACVLAN_HASH_SIZE; i++) {
 		hlist_for_each_entry_rcu(vlan, n, &port->vlan_hash[i], hlist) {
 			dev = vlan->dev;
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 468921b8f4b6..90a0281d15ea 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -753,6 +753,7 @@ static int mlx4_setup_hca(struct mlx4_dev *dev)
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	int err;
 	int port;
+	__be32 ib_port_default_caps;
 
 	err = mlx4_init_uar_table(dev);
 	if (err) {
@@ -852,6 +853,13 @@ static int mlx4_setup_hca(struct mlx4_dev *dev)
 	}
 
 	for (port = 1; port <= dev->caps.num_ports; port++) {
+		ib_port_default_caps = 0;
+		err = mlx4_get_port_ib_caps(dev, port, &ib_port_default_caps);
+		if (err)
+			mlx4_warn(dev, "failed to get port %d default "
+				  "ib capabilities (%d). Continuing with "
+				  "caps = 0\n", port, err);
+		dev->caps.ib_port_def_cap[port] = ib_port_default_caps;
 		err = mlx4_SET_PORT(dev, port);
 		if (err) {
 			mlx4_err(dev, "Failed to set port %d, aborting\n",
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index 56a2e213fe62..34c909deaff3 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -385,5 +385,6 @@ void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table);
 void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table);
 
 int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port);
+int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps);
 
 #endif /* MLX4_H */
diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c
index e2fdab42c4ce..0a057e5dc63b 100644
--- a/drivers/net/mlx4/port.c
+++ b/drivers/net/mlx4/port.c
@@ -258,6 +258,42 @@ out:
 }
 EXPORT_SYMBOL_GPL(mlx4_unregister_vlan);
 
+int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps)
+{
+	struct mlx4_cmd_mailbox *inmailbox, *outmailbox;
+	u8 *inbuf, *outbuf;
+	int err;
+
+	inmailbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(inmailbox))
+		return PTR_ERR(inmailbox);
+
+	outmailbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(outmailbox)) {
+		mlx4_free_cmd_mailbox(dev, inmailbox);
+		return PTR_ERR(outmailbox);
+	}
+
+	inbuf = inmailbox->buf;
+	outbuf = outmailbox->buf;
+	memset(inbuf, 0, 256);
+	memset(outbuf, 0, 256);
+	inbuf[0] = 1;
+	inbuf[1] = 1;
+	inbuf[2] = 1;
+	inbuf[3] = 1;
+	*(__be16 *) (&inbuf[16]) = cpu_to_be16(0x0015);
+	*(__be32 *) (&inbuf[20]) = cpu_to_be32(port);
+
+	err = mlx4_cmd_box(dev, inmailbox->dma, outmailbox->dma, port, 3,
+			   MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C);
+	if (!err)
+		*caps = *(__be32 *) (outbuf + 84);
+	mlx4_free_cmd_mailbox(dev, inmailbox);
+	mlx4_free_cmd_mailbox(dev, outmailbox);
+	return err;
+}
+
 int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port)
 {
 	struct mlx4_cmd_mailbox *mailbox;
@@ -273,7 +309,8 @@ int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port)
 		((u8 *) mailbox->buf)[3] = 6;
 		((__be16 *) mailbox->buf)[4] = cpu_to_be16(1 << 15);
 		((__be16 *) mailbox->buf)[6] = cpu_to_be16(1 << 15);
-	}
+	} else
+		((__be32 *) mailbox->buf)[1] = dev->caps.ib_port_def_cap[port];
 	err = mlx4_cmd(dev, mailbox->dma, port, is_eth, MLX4_CMD_SET_PORT,
 		       MLX4_CMD_TIME_CLASS_B);
 
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c
index b9bed82e1d21..b289a0a2b945 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/netx-eth.c
@@ -401,6 +401,8 @@ static int netx_eth_drv_probe(struct platform_device *pdev)
 	priv->xmac_base = priv->xc->xmac_base;
 	priv->sram_base = priv->xc->sram_base;
 
+	spin_lock_init(&priv->lock);
+
 	ret = pfifo_request(PFIFO_MASK(priv->id));
 	if (ret) {
 		printk("unable to request PFIFO\n");
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index b37a498939ae..0418045166c3 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -779,6 +779,7 @@ static struct pcmcia_device_id axnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2),
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8),
 	PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609),
+	PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEtherCard", 0x281f1c5d, 0x7ef26116),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FEP501", 0x281f1c5d, 0x2e272058),
@@ -1174,7 +1175,6 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
  * ax_interrupt - handle the interrupts from an 8390
  * @irq: interrupt number
  * @dev_id: a pointer to the net_device
- * @regs: unused
  *
  * Handle the ether interface interrupts. We pull packets from
  * the 8390 via the card specific functions and fire them at the networking
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index cf3cca4642f2..f51944b28cfa 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -349,7 +349,7 @@ static int ibmtr_suspend(struct pcmcia_device *link)
 	return 0;
 }
 
-static int ibmtr_resume(struct pcmcia_device *link)
+static int __devinit ibmtr_resume(struct pcmcia_device *link)
 {
 	ibmtr_dev_t *info = link->priv;
 	struct net_device *dev = info->dev;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index e40d6301aa7a..ce486f094492 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1693,7 +1693,6 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8),
 	PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76),
 	PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e),
-	PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875),
 	PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f),
 	PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b),
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 55bc24b234e3..25acbbde4a60 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -227,8 +227,17 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
 	if (r)
 		return ERR_PTR(r);
 
-	/* If the phy_id is all Fs or all 0s, there is no device there */
-	if ((0xffff == phy_id) || (0x00 == phy_id))
+	/* If the phy_id is mostly Fs, there is no device there */
+	if ((phy_id & 0x1fffffff) == 0x1fffffff)
+		return NULL;
+
+	/*
+	 * Broken hardware is sometimes missing the pull down resistor on the
+	 * MDIO line, which results in reads to non-existent devices returning
+	 * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
+	 * device as well.
+	 */
+	if (phy_id == 0)
 		return NULL;
 
 	dev = phy_device_create(bus, addr, phy_id);
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 8874497b6bbf..dd3b2447e85a 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -34,6 +34,8 @@
 #define MII_VSC8244_IMASK_DUPLEX	0x1000
 #define MII_VSC8244_IMASK_MASK		0xf000
 
+#define MII_VSC8221_IMASK_MASK		0xa000
+
 /* Vitesse Interrupt Status Register */
 #define MII_VSC8244_ISTAT		0x1a
 #define MII_VSC8244_ISTAT_STATUS	0x8000
@@ -49,6 +51,12 @@
 #define MII_VSC8244_AUXCONSTAT_GBIT    	0x0010
 #define MII_VSC8244_AUXCONSTAT_100     	0x0008
 
+#define MII_VSC8221_AUXCONSTAT_INIT	0x0004 /* need to set this bit? */
+#define MII_VSC8221_AUXCONSTAT_RESERVED	0x0004
+
+#define PHY_ID_VSC8244			0x000fc6c0
+#define PHY_ID_VSC8221			0x000fc550
+
 MODULE_DESCRIPTION("Vitesse PHY driver");
 MODULE_AUTHOR("Kriston Carson");
 MODULE_LICENSE("GPL");
@@ -95,13 +103,15 @@ static int vsc824x_ack_interrupt(struct phy_device *phydev)
 	return (err < 0) ? err : 0;
 }
 
-static int vsc824x_config_intr(struct phy_device *phydev)
+static int vsc82xx_config_intr(struct phy_device *phydev)
 {
 	int err;
 
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 		err = phy_write(phydev, MII_VSC8244_IMASK,
-				MII_VSC8244_IMASK_MASK);
+			phydev->drv->phy_id == PHY_ID_VSC8244 ?
+				MII_VSC8244_IMASK_MASK :
+				MII_VSC8221_IMASK_MASK);
 	else {
 		/*
 		 * The Vitesse PHY cannot clear the interrupt
@@ -120,7 +130,7 @@ static int vsc824x_config_intr(struct phy_device *phydev)
 
 /* Vitesse 824x */
 static struct phy_driver vsc8244_driver = {
-	.phy_id		= 0x000fc6c0,
+	.phy_id		= PHY_ID_VSC8244,
 	.name		= "Vitesse VSC8244",
 	.phy_id_mask	= 0x000fffc0,
 	.features	= PHY_GBIT_FEATURES,
@@ -129,19 +139,55 @@ static struct phy_driver vsc8244_driver = {
 	.config_aneg	= &genphy_config_aneg,
 	.read_status	= &genphy_read_status,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
-	.config_intr	= &vsc824x_config_intr,
+	.config_intr	= &vsc82xx_config_intr,
 	.driver 	= { .owner = THIS_MODULE,},
 };
 
-static int __init vsc8244_init(void)
+static int vsc8221_config_init(struct phy_device *phydev)
 {
-	return phy_driver_register(&vsc8244_driver);
+	int err;
+
+	err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
+			MII_VSC8221_AUXCONSTAT_INIT);
+	return err;
+
+	/* Perhaps we should set EXT_CON1 based on the interface?
+	   Options are 802.3Z SerDes or SGMII */
+}
+
+/* Vitesse 8221 */
+static struct phy_driver vsc8221_driver = {
+	.phy_id		= PHY_ID_VSC8221,
+	.phy_id_mask	= 0x000ffff0,
+	.name		= "Vitesse VSC8221",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= &vsc8221_config_init,
+	.config_aneg	= &genphy_config_aneg,
+	.read_status	= &genphy_read_status,
+	.ack_interrupt	= &vsc824x_ack_interrupt,
+	.config_intr	= &vsc82xx_config_intr,
+	.driver 	= { .owner = THIS_MODULE,},
+};
+
+static int __init vsc82xx_init(void)
+{
+	int err;
+
+	err = phy_driver_register(&vsc8244_driver);
+	if (err < 0)
+		return err;
+	err = phy_driver_register(&vsc8221_driver);
+	if (err < 0)
+		phy_driver_unregister(&vsc8244_driver);
+	return err;
 }
 
-static void __exit vsc8244_exit(void)
+static void __exit vsc82xx_exit(void)
 {
 	phy_driver_unregister(&vsc8244_driver);
+	phy_driver_unregister(&vsc8221_driver);
 }
 
-module_init(vsc8244_init);
-module_exit(vsc8244_exit);
+module_init(vsc82xx_init);
+module_exit(vsc82xx_exit);
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index 185b1dff10a8..e98d9773158d 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -1353,6 +1353,7 @@ static int pppol2tp_release(struct socket *sock)
 			kfree_skb(skb);
 			sock_put(sk);
 		}
+		sock_put(sk);
 	}
 
 	release_sock(sk);
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index fa3a460f8e2f..8e8337e8b072 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1630,7 +1630,6 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
  *	sis900_interrupt - sis900 interrupt handler
  *	@irq: the irq number
  *	@dev_instance: the client data object
- *	@regs: snapshot of processor context
  *
  *	The interrupt handler does all of the Rx thread work,
  *	and cleans up after the Tx thread
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index b185cd12269c..9a16a79b67d0 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -1735,7 +1735,7 @@ static const struct ethtool_ops smc911x_ethtool_ops = {
  * This routine has a simple purpose -- make the SMC chip generate an
  * interrupt, so an auto-detect routine can detect it, and find the IRQ,
  */
-static int __init smc911x_findirq(struct net_device *dev)
+static int __devinit smc911x_findirq(struct net_device *dev)
 {
 	struct smc911x_local *lp = netdev_priv(dev);
 	int timeout = 20;
@@ -1799,7 +1799,7 @@ static int __init smc911x_findirq(struct net_device *dev)
  * o  actually GRAB the irq.
  * o  GRAB the region
  */
-static int __init smc911x_probe(struct net_device *dev)
+static int __devinit smc911x_probe(struct net_device *dev)
 {
 	struct smc911x_local *lp = netdev_priv(dev);
 	int i, retval;
@@ -2048,7 +2048,7 @@ err_out:
  *	 0 --> there is a device
  *	 anything else, error
  */
-static int smc911x_drv_probe(struct platform_device *pdev)
+static int __devinit smc911x_drv_probe(struct platform_device *pdev)
 {
 #ifdef SMC_DYNAMIC_BUS_CONFIG
 	struct smc911x_platdata *pd = pdev->dev.platform_data;
@@ -2124,7 +2124,7 @@ out:
 	return ret;
 }
 
-static int smc911x_drv_remove(struct platform_device *pdev)
+static int __devexit smc911x_drv_remove(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct smc911x_local *lp = netdev_priv(ndev);
@@ -2195,7 +2195,7 @@ static int smc911x_drv_resume(struct platform_device *dev)
 
 static struct platform_driver smc911x_driver = {
 	.probe		 = smc911x_drv_probe,
-	.remove	 = smc911x_drv_remove,
+	.remove	 = __devexit_p(smc911x_drv_remove),
 	.suspend	 = smc911x_drv_suspend,
 	.resume	 = smc911x_drv_resume,
 	.driver	 = {
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index fc80f250da31..35c56abf4113 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1696,7 +1696,7 @@ static const struct ethtool_ops smc_ethtool_ops = {
  * I just deleted auto_irq.c, since it was never built...
  *   --jgarzik
  */
-static int __init smc_findirq(struct smc_local *lp)
+static int __devinit smc_findirq(struct smc_local *lp)
 {
 	void __iomem *ioaddr = lp->base;
 	int timeout = 20;
@@ -1770,7 +1770,7 @@ static int __init smc_findirq(struct smc_local *lp)
  * o  actually GRAB the irq.
  * o  GRAB the region
  */
-static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
+static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr,
 			    unsigned long irq_flags)
 {
 	struct smc_local *lp = netdev_priv(dev);
@@ -2126,7 +2126,7 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device *
  *	0 --> there is a device
  *	anything else, error
  */
-static int smc_drv_probe(struct platform_device *pdev)
+static int __devinit smc_drv_probe(struct platform_device *pdev)
 {
 	struct smc91x_platdata *pd = pdev->dev.platform_data;
 	struct smc_local *lp;
@@ -2240,7 +2240,7 @@ static int smc_drv_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int smc_drv_remove(struct platform_device *pdev)
+static int __devexit smc_drv_remove(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct smc_local *lp = netdev_priv(ndev);
@@ -2305,7 +2305,7 @@ static int smc_drv_resume(struct platform_device *dev)
 
 static struct platform_driver smc_driver = {
 	.probe		= smc_drv_probe,
-	.remove		= smc_drv_remove,
+	.remove		= __devexit_p(smc_drv_remove),
 	.suspend	= smc_drv_suspend,
 	.resume		= smc_drv_resume,
 	.driver		= {
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index a07cc9351c6b..37e2cb4f4f88 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -527,7 +527,8 @@ struct smc_local {
  * as RX which can overrun memory and lose packets.
  */
 #include <linux/dma-mapping.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
 #include <mach/pxa-regs.h>
 
 #ifdef SMC_insl
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index b6435d0d71f9..07599b492359 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -672,7 +672,6 @@ write_hash:
 /**
  * spider_net_prepare_tx_descr - fill tx descriptor with skb data
  * @card: card structure
- * @descr: descriptor structure to fill out
  * @skb: packet to use
  *
  * returns 0 on success, <0 on failure.
@@ -867,7 +866,6 @@ spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
 /**
  * spider_net_kick_tx_dma - enables TX DMA processing
  * @card: card structure
- * @descr: descriptor address to enable TX processing at
  *
  * This routine will start the transmit DMA running if
  * it is not already running. This routine ned only be
@@ -1637,7 +1635,6 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg,
  * spider_net_interrupt - interrupt handler for spider_net
  * @irq: interrupt number
  * @ptr: pointer to net_device
- * @regs: PU registers
  *
  * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
  * interrupt found raised by card.
@@ -2419,7 +2416,6 @@ spider_net_undo_pci_setup(struct spider_net_card *card)
 
 /**
  * spider_net_setup_pci_dev - sets up the device in terms of PCI operations
- * @card: card structure
  * @pdev: PCI device
  *
  * Returns the card structure or NULL if any errors occur
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 4291458955ef..fed7eba65ead 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1142,6 +1142,70 @@ static int gem_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	return NETDEV_TX_OK;
 }
 
+static void gem_pcs_reset(struct gem *gp)
+{
+	int limit;
+	u32 val;
+
+	/* Reset PCS unit. */
+	val = readl(gp->regs + PCS_MIICTRL);
+	val |= PCS_MIICTRL_RST;
+	writel(val, gp->regs + PCS_MIICTRL);
+
+	limit = 32;
+	while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
+		udelay(100);
+		if (limit-- <= 0)
+			break;
+	}
+	if (limit <= 0)
+		printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
+		       gp->dev->name);
+}
+
+static void gem_pcs_reinit_adv(struct gem *gp)
+{
+	u32 val;
+
+	/* Make sure PCS is disabled while changing advertisement
+	 * configuration.
+	 */
+	val = readl(gp->regs + PCS_CFG);
+	val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
+	writel(val, gp->regs + PCS_CFG);
+
+	/* Advertise all capabilities except assymetric
+	 * pause.
+	 */
+	val = readl(gp->regs + PCS_MIIADV);
+	val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
+		PCS_MIIADV_SP | PCS_MIIADV_AP);
+	writel(val, gp->regs + PCS_MIIADV);
+
+	/* Enable and restart auto-negotiation, disable wrapback/loopback,
+	 * and re-enable PCS.
+	 */
+	val = readl(gp->regs + PCS_MIICTRL);
+	val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
+	val &= ~PCS_MIICTRL_WB;
+	writel(val, gp->regs + PCS_MIICTRL);
+
+	val = readl(gp->regs + PCS_CFG);
+	val |= PCS_CFG_ENABLE;
+	writel(val, gp->regs + PCS_CFG);
+
+	/* Make sure serialink loopback is off.  The meaning
+	 * of this bit is logically inverted based upon whether
+	 * you are in Serialink or SERDES mode.
+	 */
+	val = readl(gp->regs + PCS_SCTRL);
+	if (gp->phy_type == phy_serialink)
+		val &= ~PCS_SCTRL_LOOP;
+	else
+		val |= PCS_SCTRL_LOOP;
+	writel(val, gp->regs + PCS_SCTRL);
+}
+
 #define STOP_TRIES 32
 
 /* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1168,6 +1232,9 @@ static void gem_reset(struct gem *gp)
 
 	if (limit <= 0)
 		printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
+
+	if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
+		gem_pcs_reinit_adv(gp);
 }
 
 /* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1324,7 +1391,7 @@ static int gem_set_link_modes(struct gem *gp)
 	    	   gp->phy_type == phy_serdes) {
 		u32 pcs_lpa = readl(gp->regs + PCS_MIILP);
 
-		if (pcs_lpa & PCS_MIIADV_FD)
+		if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes)
 			full_duplex = 1;
 		speed = SPEED_1000;
 	}
@@ -1488,6 +1555,9 @@ static void gem_link_timer(unsigned long data)
 			val = readl(gp->regs + PCS_MIISTAT);
 
 		if ((val & PCS_MIISTAT_LS) != 0) {
+			if (gp->lstate == link_up)
+				goto restart;
+
 			gp->lstate = link_up;
 			netif_carrier_on(gp->dev);
 			(void)gem_set_link_modes(gp);
@@ -1708,61 +1778,8 @@ static void gem_init_phy(struct gem *gp)
 		if (gp->phy_mii.def && gp->phy_mii.def->ops->init)
 			gp->phy_mii.def->ops->init(&gp->phy_mii);
 	} else {
-		u32 val;
-		int limit;
-
-		/* Reset PCS unit. */
-		val = readl(gp->regs + PCS_MIICTRL);
-		val |= PCS_MIICTRL_RST;
-		writeb(val, gp->regs + PCS_MIICTRL);
-
-		limit = 32;
-		while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
-			udelay(100);
-			if (limit-- <= 0)
-				break;
-		}
-		if (limit <= 0)
-			printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
-			       gp->dev->name);
-
-		/* Make sure PCS is disabled while changing advertisement
-		 * configuration.
-		 */
-		val = readl(gp->regs + PCS_CFG);
-		val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
-		writel(val, gp->regs + PCS_CFG);
-
-		/* Advertise all capabilities except assymetric
-		 * pause.
-		 */
-		val = readl(gp->regs + PCS_MIIADV);
-		val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
-			PCS_MIIADV_SP | PCS_MIIADV_AP);
-		writel(val, gp->regs + PCS_MIIADV);
-
-		/* Enable and restart auto-negotiation, disable wrapback/loopback,
-		 * and re-enable PCS.
-		 */
-		val = readl(gp->regs + PCS_MIICTRL);
-		val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
-		val &= ~PCS_MIICTRL_WB;
-		writel(val, gp->regs + PCS_MIICTRL);
-
-		val = readl(gp->regs + PCS_CFG);
-		val |= PCS_CFG_ENABLE;
-		writel(val, gp->regs + PCS_CFG);
-
-		/* Make sure serialink loopback is off.  The meaning
-		 * of this bit is logically inverted based upon whether
-		 * you are in Serialink or SERDES mode.
-		 */
-		val = readl(gp->regs + PCS_SCTRL);
-		if (gp->phy_type == phy_serialink)
-			val &= ~PCS_SCTRL_LOOP;
-		else
-			val |= PCS_SCTRL_LOOP;
-		writel(val, gp->regs + PCS_SCTRL);
+		gem_pcs_reset(gp);
+		gem_pcs_reinit_adv(gp);
 	}
 
 	/* Default aneg parameters */
@@ -2680,6 +2697,21 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		cmd->speed = 0;
 		cmd->duplex = cmd->port = cmd->phy_address =
 			cmd->transceiver = cmd->autoneg = 0;
+
+		/* serdes means usually a Fibre connector, with most fixed */
+		if (gp->phy_type == phy_serdes) {
+			cmd->port = PORT_FIBRE;
+			cmd->supported = (SUPPORTED_1000baseT_Half |
+				SUPPORTED_1000baseT_Full |
+				SUPPORTED_FIBRE | SUPPORTED_Autoneg |
+				SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+			cmd->advertising = cmd->supported;
+			cmd->transceiver = XCVR_INTERNAL;
+			if (gp->lstate == link_up)
+				cmd->speed = SPEED_1000;
+			cmd->duplex = DUPLEX_FULL;
+			cmd->autoneg = 1;
+		}
 	}
 	cmd->maxtxpkt = cmd->maxrxpkt = 0;
 
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index cfd4d052d666..2d14255eb103 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -240,6 +240,10 @@ static u64 ath5k_get_tsf(struct ieee80211_hw *hw);
 static void ath5k_reset_tsf(struct ieee80211_hw *hw);
 static int ath5k_beacon_update(struct ieee80211_hw *hw,
 		struct sk_buff *skb);
+static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
+		struct ieee80211_vif *vif,
+		struct ieee80211_bss_conf *bss_conf,
+		u32 changes);
 
 static struct ieee80211_ops ath5k_hw_ops = {
 	.tx 		= ath5k_tx,
@@ -256,6 +260,7 @@ static struct ieee80211_ops ath5k_hw_ops = {
 	.get_tx_stats 	= ath5k_get_tx_stats,
 	.get_tsf 	= ath5k_get_tsf,
 	.reset_tsf 	= ath5k_reset_tsf,
+	.bss_info_changed = ath5k_bss_info_changed,
 };
 
 /*
@@ -2942,7 +2947,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw,
 		sc->opmode != NL80211_IFTYPE_MESH_POINT &&
 		test_bit(ATH_STAT_PROMISC, sc->status))
 		rfilt |= AR5K_RX_FILTER_PROM;
-	if (sc->opmode == NL80211_IFTYPE_STATION ||
+	if ((sc->opmode == NL80211_IFTYPE_STATION && sc->assoc) ||
 		sc->opmode == NL80211_IFTYPE_ADHOC) {
 		rfilt |= AR5K_RX_FILTER_BEACON;
 	}
@@ -3083,4 +3088,32 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 end:
 	return ret;
 }
+static void
+set_beacon_filter(struct ieee80211_hw *hw, bool enable)
+{
+	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_hw *ah = sc->ah;
+	u32 rfilt;
+	rfilt = ath5k_hw_get_rx_filter(ah);
+	if (enable)
+		rfilt |= AR5K_RX_FILTER_BEACON;
+	else
+		rfilt &= ~AR5K_RX_FILTER_BEACON;
+	ath5k_hw_set_rx_filter(ah, rfilt);
+	sc->filter_flags = rfilt;
+}
 
+static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif,
+				    struct ieee80211_bss_conf *bss_conf,
+				    u32 changes)
+{
+	struct ath5k_softc *sc = hw->priv;
+	if (changes & BSS_CHANGED_ASSOC) {
+		mutex_lock(&sc->lock);
+		sc->assoc = bss_conf->assoc;
+		if (sc->opmode == NL80211_IFTYPE_STATION)
+			set_beacon_filter(hw, sc->assoc);
+		mutex_unlock(&sc->lock);
+	}
+}
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h
index 06d1054ca94b..facc60ddada2 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath5k/base.h
@@ -179,6 +179,7 @@ struct ath5k_softc {
 
 	struct timer_list	calib_tim;	/* calibration timer */
 	int 			power_level;	/* Requested tx power in dbm */
+	bool			assoc;		/* assocate state */
 };
 
 #define ath5k_hw_hasbssidmask(_ah) \
diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c
index 19980cbd5d5f..ccaeb5c219d2 100644
--- a/drivers/net/wireless/ath5k/debug.c
+++ b/drivers/net/wireless/ath5k/debug.c
@@ -417,19 +417,19 @@ ath5k_debug_init_device(struct ath5k_softc *sc)
 	sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy),
 				ath5k_global_debugfs);
 
-	sc->debug.debugfs_debug = debugfs_create_file("debug", 0666,
+	sc->debug.debugfs_debug = debugfs_create_file("debug", S_IWUSR | S_IRUGO,
 				sc->debug.debugfs_phydir, sc, &fops_debug);
 
-	sc->debug.debugfs_registers = debugfs_create_file("registers", 0444,
+	sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUGO,
 				sc->debug.debugfs_phydir, sc, &fops_registers);
 
-	sc->debug.debugfs_tsf = debugfs_create_file("tsf", 0666,
+	sc->debug.debugfs_tsf = debugfs_create_file("tsf", S_IWUSR | S_IRUGO,
 				sc->debug.debugfs_phydir, sc, &fops_tsf);
 
-	sc->debug.debugfs_beacon = debugfs_create_file("beacon", 0666,
+	sc->debug.debugfs_beacon = debugfs_create_file("beacon", S_IWUSR | S_IRUGO,
 				sc->debug.debugfs_phydir, sc, &fops_beacon);
 
-	sc->debug.debugfs_reset = debugfs_create_file("reset", 0222,
+	sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR,
 				sc->debug.debugfs_phydir, sc, &fops_reset);
 }
 
diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c
index 9e15c30bbc06..4dd1c1bda0fb 100644
--- a/drivers/net/wireless/ath9k/beacon.c
+++ b/drivers/net/wireless/ath9k/beacon.c
@@ -170,7 +170,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 	skb = (struct sk_buff *)bf->bf_mpdu;
 	if (skb) {
 		pci_unmap_single(sc->pdev, bf->bf_dmacontext,
-				 skb_end_pointer(skb) - skb->head,
+				 skb->len,
 				 PCI_DMA_TODEVICE);
 	}
 
@@ -193,7 +193,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
 
 	bf->bf_buf_addr = bf->bf_dmacontext =
 		pci_map_single(sc->pdev, skb->data,
-			       skb_end_pointer(skb) - skb->head,
+			       skb->len,
 			       PCI_DMA_TODEVICE);
 
 	skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data);
@@ -352,7 +352,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
 	if (bf->bf_mpdu != NULL) {
 		skb = (struct sk_buff *)bf->bf_mpdu;
 		pci_unmap_single(sc->pdev, bf->bf_dmacontext,
-				 skb_end_pointer(skb) - skb->head,
+				 skb->len,
 				 PCI_DMA_TODEVICE);
 		dev_kfree_skb_any(skb);
 		bf->bf_mpdu = NULL;
@@ -412,7 +412,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
 
 	bf->bf_buf_addr = bf->bf_dmacontext =
 		pci_map_single(sc->pdev, skb->data,
-			       skb_end_pointer(skb) - skb->head,
+			       skb->len,
 			       PCI_DMA_TODEVICE);
 	bf->bf_mpdu = skb;
 
@@ -439,7 +439,7 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp)
 		if (bf->bf_mpdu != NULL) {
 			struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
 			pci_unmap_single(sc->pdev, bf->bf_dmacontext,
-					 skb_end_pointer(skb) - skb->head,
+					 skb->len,
 					 PCI_DMA_TODEVICE);
 			dev_kfree_skb_any(skb);
 			bf->bf_mpdu = NULL;
diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c
index 4983402af559..504a0444d89f 100644
--- a/drivers/net/wireless/ath9k/recv.c
+++ b/drivers/net/wireless/ath9k/recv.c
@@ -49,10 +49,12 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf)
 	ASSERT(skb != NULL);
 	ds->ds_vdata = skb->data;
 
-	/* setup rx descriptors */
+	/* setup rx descriptors. The sc_rxbufsize here tells the harware
+	 * how much data it can DMA to us and that we are prepared
+	 * to process */
 	ath9k_hw_setuprxdesc(ah,
 			     ds,
-			     skb_tailroom(skb),   /* buffer size */
+			     sc->sc_rxbufsize,
 			     0);
 
 	if (sc->sc_rxlink == NULL)
@@ -398,6 +400,13 @@ static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc,
 	 * in rx'd frames.
 	 */
 
+	/* Note: the kernel can allocate a value greater than
+	 * what we ask it to give us. We really only need 4 KB as that
+	 * is this hardware supports and in fact we need at least 3849
+	 * as that is the MAX AMSDU size this hardware supports.
+	 * Unfortunately this means we may get 8 KB here from the
+	 * kernel... and that is actually what is observed on some
+	 * systems :( */
 	skb = dev_alloc_skb(len + sc->sc_cachelsz - 1);
 	if (skb != NULL) {
 		off = ((unsigned long) skb->data) % sc->sc_cachelsz;
@@ -456,7 +465,7 @@ static int ath_rx_indicate(struct ath_softc *sc,
 	if (nskb != NULL) {
 		bf->bf_mpdu = nskb;
 		bf->bf_buf_addr = pci_map_single(sc->pdev, nskb->data,
-					 skb_end_pointer(nskb) - nskb->head,
+					 sc->sc_rxbufsize,
 					 PCI_DMA_FROMDEVICE);
 		bf->bf_dmacontext = bf->bf_buf_addr;
 		ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf;
@@ -542,7 +551,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs)
 
 			bf->bf_mpdu = skb;
 			bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data,
-					 skb_end_pointer(skb) - skb->head,
+					 sc->sc_rxbufsize,
 					 PCI_DMA_FROMDEVICE);
 			bf->bf_dmacontext = bf->bf_buf_addr;
 			ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf;
@@ -1007,7 +1016,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush)
 
 		pci_dma_sync_single_for_cpu(sc->pdev,
 					    bf->bf_buf_addr,
-					    skb_tailroom(skb),
+					    sc->sc_rxbufsize,
 					    PCI_DMA_FROMDEVICE);
 		pci_unmap_single(sc->pdev,
 				 bf->bf_buf_addr,
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index dcce3542d5a7..7a9f901d4ff6 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -3897,6 +3897,7 @@ static int ipw_disassociate(void *data)
 	if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
 		return 0;
 	ipw_send_disassociate(data, 0);
+	netif_carrier_off(priv->net_dev);
 	return 1;
 }
 
@@ -10190,6 +10191,9 @@ static int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb,
 	u16 remaining_bytes;
 	int fc;
 
+	if (!(priv->status & STATUS_ASSOCIATED))
+		goto drop;
+
 	hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
 	switch (priv->ieee->iw_mode) {
 	case IW_MODE_ADHOC:
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 444c5cc05f03..c4c0371c763b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1384,9 +1384,11 @@ void iwl_rx_handle(struct iwl_priv *priv)
 
 		rxq->queue[i] = NULL;
 
-		pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->aligned_dma_addr,
-					    priv->hw_params.rx_buf_size,
-					    PCI_DMA_FROMDEVICE);
+		dma_sync_single_range_for_cpu(
+				&priv->pci_dev->dev, rxb->real_dma_addr,
+				rxb->aligned_dma_addr - rxb->real_dma_addr,
+				priv->hw_params.rx_buf_size,
+				PCI_DMA_FROMDEVICE);
 		pkt = (struct iwl_rx_packet *)rxb->skb->data;
 
 		/* Reclaim a command buffer only if this packet is a response
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 4c312c55f90c..01a845851338 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -290,6 +290,9 @@ void iwl_clear_stations_table(struct iwl_priv *priv)
 	priv->num_stations = 0;
 	memset(priv->stations, 0, sizeof(priv->stations));
 
+	/* clean ucode key table bit map */
+	priv->ucode_key_table = 0;
+
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 }
 EXPORT_SYMBOL(iwl_clear_stations_table);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 61797f3f8d5c..26f7084d3011 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -475,7 +475,7 @@ static int iwl_get_free_ucode_key_index(struct iwl_priv *priv)
 		if (!test_and_set_bit(i, &priv->ucode_key_table))
 			return i;
 
-	return -1;
+	return WEP_INVALID_OFFSET;
 }
 
 int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty)
@@ -620,6 +620,9 @@ static int iwl_set_wep_dynamic_key_info(struct iwl_priv *priv,
 	/* else, we are overriding an existing key => no need to allocated room
 	 * in uCode. */
 
+	WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+		"no space for new kew");
+
 	priv->stations[sta_id].sta.key.key_flags = key_flags;
 	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
 	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
@@ -637,6 +640,7 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
 {
 	unsigned long flags;
 	__le16 key_flags = 0;
+	int ret;
 
 	key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
 	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
@@ -664,14 +668,18 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
 	/* else, we are overriding an existing key => no need to allocated room
 	 * in uCode. */
 
+	WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+		"no space for new kew");
+
 	priv->stations[sta_id].sta.key.key_flags = key_flags;
 	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
 	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 
+	ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
+
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
-	IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n");
-	return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
+	return ret;
 }
 
 static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv,
@@ -696,6 +704,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv,
 	/* else, we are overriding an existing key => no need to allocated room
 	 * in uCode. */
 
+	WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+		"no space for new kew");
+
 	/* This copy is acutally not needed: we get the key with each TX */
 	memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16);
 
@@ -734,6 +745,13 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
 		return 0;
 	}
 
+	if (priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET) {
+		IWL_WARNING("Removing wrong key %d 0x%x\n",
+			    keyconf->keyidx, key_flags);
+		spin_unlock_irqrestore(&priv->sta_lock, flags);
+		return 0;
+	}
+
 	if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset,
 		&priv->ucode_key_table))
 		IWL_ERROR("index %d not used in uCode key table.\n",
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index fe1867b25ff7..cac732f4047f 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -615,7 +615,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr,
 		struct ieee80211_hdr *tx_hdr;
 
 		tx_hdr = (struct ieee80211_hdr *)skb->data;
-		if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1)))
+		if (likely(!memcmp(tx_hdr->addr2, rx_hdr->addr1, ETH_ALEN)))
 		{
 			__skb_unlink(skb, q);
 			tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1);
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index c6948d8f53f6..6d017adc914a 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1785,7 +1785,7 @@ static int __devexit xennet_remove(struct xenbus_device *dev)
 	return 0;
 }
 
-static struct xenbus_driver netfront = {
+static struct xenbus_driver netfront_driver = {
 	.name = "vif",
 	.owner = THIS_MODULE,
 	.ids = netfront_ids,
@@ -1805,7 +1805,7 @@ static int __init netif_init(void)
 
 	printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n");
 
-	return xenbus_register_frontend(&netfront);
+	return xenbus_register_frontend(&netfront_driver);
 }
 module_init(netif_init);
 
@@ -1815,7 +1815,7 @@ static void __exit netif_exit(void)
 	if (xen_initial_domain())
 		return;
 
-	xenbus_unregister_driver(&netfront);
+	xenbus_unregister_driver(&netfront_driver);
 }
 module_exit(netif_exit);
 
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index e2e95b36a603..101ed49a2d15 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -70,6 +70,8 @@ static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc
 	 * parallel ports and <S> is the number of serial ports.
 	 */
 	card->numports = (dev->subsystem_device & 0xf0) >> 4;
+	if (card->numports > ARRAY_SIZE(card->addr))
+		card->numports = ARRAY_SIZE(card->addr);
 	return 0;
 }
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 28af496b441e..061d1ee0046a 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2042,7 +2042,7 @@ static int __devinit pci_init(void)
 	return 0;
 }
 
-static int __devinit pci_setup(char *str)
+static int __init pci_setup(char *str)
 {
 	while (str) {
 		char *k = strchr(str, ',');
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 8f63f4c6b85f..9aad608bcf3f 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -16,6 +16,7 @@
 #include <linux/pm.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/jiffies.h>
 #include <linux/pci-aspm.h>
 #include "../pci.h"
 
@@ -161,11 +162,12 @@ static void pcie_check_clock_pm(struct pci_dev *pdev)
  */
 static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
 {
-	int pos, child_pos;
+	int pos, child_pos, i = 0;
 	u16 reg16 = 0;
 	struct pci_dev *child_dev;
 	int same_clock = 1;
-
+	unsigned long start_jiffies;
+	u16 child_regs[8], parent_reg;
 	/*
 	 * all functions of a slot should have the same Slot Clock
 	 * Configuration, so just check one function
@@ -191,16 +193,19 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
 		child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
 		pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
 			&reg16);
+		child_regs[i] = reg16;
 		if (same_clock)
 			reg16 |= PCI_EXP_LNKCTL_CCC;
 		else
 			reg16 &= ~PCI_EXP_LNKCTL_CCC;
 		pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
 			reg16);
+		i++;
 	}
 
 	/* Configure upstream component */
 	pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &reg16);
+	parent_reg = reg16;
 	if (same_clock)
 		reg16 |= PCI_EXP_LNKCTL_CCC;
 	else
@@ -212,12 +217,30 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
 	pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
 
 	/* Wait for link training end */
-	while (1) {
+	/* break out after waiting for 1 second */
+	start_jiffies = jiffies;
+	while ((jiffies - start_jiffies) < HZ) {
 		pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, &reg16);
 		if (!(reg16 & PCI_EXP_LNKSTA_LT))
 			break;
 		cpu_relax();
 	}
+	/* training failed -> recover */
+	if ((jiffies - start_jiffies) >= HZ) {
+		dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure"
+			    " common clock\n");
+		i = 0;
+		list_for_each_entry(child_dev, &pdev->subordinate->devices,
+				    bus_list) {
+			child_pos = pci_find_capability(child_dev,
+							PCI_CAP_ID_EXP);
+			pci_write_config_word(child_dev,
+					      child_pos + PCI_EXP_LNKCTL,
+					      child_regs[i]);
+			i++;
+		}
+		pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg);
+	}
 }
 
 /*
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 5049a47030ac..5f4f85f56cb7 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/acpi.h>
 #include <linux/kallsyms.h>
+#include <linux/dmi.h>
 #include "pci.h"
 
 int isa_dma_bridge_buggy;
@@ -1828,6 +1829,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS,
 			 PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
 			 ht_enable_msi_mapping);
 
+/* The P5N32-SLI Premium motherboard from Asus has a problem with msi
+ * for the MCP55 NIC. It is not yet determined whether the msi problem
+ * also affects other devices. As for now, turn off msi for this device.
+ */
+static void __devinit nvenet_msi_disable(struct pci_dev *dev)
+{
+	if (dmi_name_in_vendors("P5N32-SLI PREMIUM")) {
+		dev_info(&dev->dev,
+			 "Disabling msi for MCP55 NIC on P5N32-SLI Premium\n");
+		dev->no_msi = 1;
+	}
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
+			PCI_DEVICE_ID_NVIDIA_NVENET_15,
+			nvenet_msi_disable);
+
 static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
 {
 	struct pci_dev *host_bridge;
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 4dd1c3e157ae..5a8ccb4f604d 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -253,6 +253,7 @@ placeholder:
 		 __func__, pci_domain_nr(parent), parent->number, slot_nr);
 
 out:
+	kfree(slot_name);
 	up_write(&pci_bus_sem);
 	return slot;
 err:
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 222904411a13..276473543982 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -217,7 +217,7 @@ config PCMCIA_PXA2XX
 	depends on ARM && ARCH_PXA && PCMCIA
 	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
-		    || ARCH_VIPER)
+		    || ARCH_VIPER || ARCH_PXA_ESERIES)
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
 
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 238629ad7f7c..bbac46327227 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -72,5 +72,6 @@ pxa2xx-obj-$(CONFIG_ARCH_VIPER)			+= pxa2xx_viper.o
 pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps4.o
 pxa2xx-obj-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
 pxa2xx-obj-$(CONFIG_MACH_PALMLD)		+= pxa2xx_palmld.o
+pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
 
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_core.o $(pxa2xx-obj-y)
diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index bb7338863fb9..b59d4115d20f 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -334,6 +334,6 @@ static void __exit bfin_cf_exit(void)
 module_init(bfin_cf_init);
 module_exit(bfin_cf_exit);
 
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>")
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c
new file mode 100644
index 000000000000..f663a011bf4a
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_e740.c
@@ -0,0 +1,176 @@
+/*
+ * Toshiba e740 PCMCIA specific routines.
+ *
+ * (c) 2004 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/eseries-gpio.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "soc_common.h"
+
+static struct pcmcia_irqs cd_irqs[] = {
+	{
+		.sock = 0,
+		.irq  = IRQ_GPIO(GPIO_E740_PCMCIA_CD0),
+		.str  = "CF card detect"
+	},
+	{
+		.sock = 1,
+		.irq  = IRQ_GPIO(GPIO_E740_PCMCIA_CD1),
+		.str  = "Wifi switch"
+	},
+};
+
+static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	skt->irq = skt->nr == 0 ? IRQ_GPIO(GPIO_E740_PCMCIA_RDY0) :
+				IRQ_GPIO(GPIO_E740_PCMCIA_RDY1);
+
+	return soc_pcmcia_request_irqs(skt, &cd_irqs[skt->nr], 1);
+}
+
+/*
+ * Release all resources.
+ */
+static void e740_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_free_irqs(skt, &cd_irqs[skt->nr], 1);
+}
+
+static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+					struct pcmcia_state *state)
+{
+	if (skt->nr == 0) {
+		state->detect = gpio_get_value(GPIO_E740_PCMCIA_CD0) ? 0 : 1;
+		state->ready  = gpio_get_value(GPIO_E740_PCMCIA_RDY0) ? 1 : 0;
+	} else {
+		state->detect = gpio_get_value(GPIO_E740_PCMCIA_CD1) ? 0 : 1;
+		state->ready  = gpio_get_value(GPIO_E740_PCMCIA_RDY1) ? 1 : 0;
+	}
+
+	state->vs_3v  = 1;
+	state->bvd1   = 1;
+	state->bvd2   = 1;
+	state->wrprot = 0;
+	state->vs_Xv  = 0;
+}
+
+static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+					const socket_state_t *state)
+{
+	if (state->flags & SS_RESET) {
+		if (skt->nr == 0)
+			gpio_set_value(GPIO_E740_PCMCIA_RST0, 1);
+		else
+			gpio_set_value(GPIO_E740_PCMCIA_RST1, 1);
+	} else {
+		if (skt->nr == 0)
+			gpio_set_value(GPIO_E740_PCMCIA_RST0, 0);
+		else
+			gpio_set_value(GPIO_E740_PCMCIA_RST1, 0);
+	}
+
+	switch (state->Vcc) {
+	case 0:	/* Socket off */
+		if (skt->nr == 0)
+			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 0);
+		else
+			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 1);
+		break;
+	case 50:
+	case 33: /* socket on */
+		if (skt->nr == 0)
+			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 1);
+		else
+			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 0);
+		break;
+	default:
+		printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc);
+	}
+
+	return 0;
+}
+
+/*
+ * Enable card status IRQs on (re-)initialisation.  This can
+ * be called at initialisation, power management event, or
+ * pcmcia event.
+ */
+static void e740_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_enable_irqs(skt, cd_irqs, ARRAY_SIZE(cd_irqs));
+}
+
+/*
+ * Disable card status IRQs on suspend.
+ */
+static void e740_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+	soc_pcmcia_disable_irqs(skt, cd_irqs, ARRAY_SIZE(cd_irqs));
+}
+
+static struct pcmcia_low_level e740_pcmcia_ops = {
+	.owner            = THIS_MODULE,
+	.hw_init          = e740_pcmcia_hw_init,
+	.hw_shutdown      = e740_pcmcia_hw_shutdown,
+	.socket_state     = e740_pcmcia_socket_state,
+	.configure_socket = e740_pcmcia_configure_socket,
+	.socket_init      = e740_pcmcia_socket_init,
+	.socket_suspend   = e740_pcmcia_socket_suspend,
+	.nr               = 2,
+};
+
+static struct platform_device *e740_pcmcia_device;
+
+static int __init e740_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_e740())
+		return -ENODEV;
+
+	e740_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!e740_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(e740_pcmcia_device, &e740_pcmcia_ops,
+					sizeof(e740_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(e740_pcmcia_device);
+
+	if (ret)
+		platform_device_put(e740_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit e740_pcmcia_exit(void)
+{
+	platform_device_unregister(e740_pcmcia_device);
+}
+
+module_init(e740_pcmcia_init);
+module_exit(e740_pcmcia_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_DESCRIPTION("e740 PCMCIA platform support");
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index a926c896475e..643a6b98462b 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -879,7 +879,7 @@ static void rio_update_route_tables(struct rio_mport *port)
  * link, then start recursive peer enumeration. Returns %0 if
  * enumeration succeeds or %-EBUSY if enumeration fails.
  */
-int rio_enum_mport(struct rio_mport *mport)
+int __devinit rio_enum_mport(struct rio_mport *mport)
 {
 	struct rio_net *net = NULL;
 	int rc = 0;
@@ -972,7 +972,7 @@ static void rio_enum_timeout(unsigned long data)
  * peer discovery. Returns %0 if discovery succeeds or %-EBUSY
  * on failure.
  */
-int rio_disc_mport(struct rio_mport *mport)
+int __devinit rio_disc_mport(struct rio_mport *mport)
 {
 	struct rio_net *net = NULL;
 	int enum_timeout_flag = 0;
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 680661abbc4b..6395c780008b 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -467,7 +467,7 @@ static int __devinit rio_init(void)
 
 device_initcall(rio_init);
 
-int rio_init_mports(void)
+int __devinit rio_init_mports(void)
 {
 	int rc = 0;
 	struct rio_mport *port;
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 2133f37906f2..d5e4e637ddec 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -21,6 +21,7 @@
 
 #include <mach/board.h>
 #include <mach/at91_rtt.h>
+#include <mach/cpu.h>
 
 
 /*
diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c
index 341d7a5b45a2..4e91419e8911 100644
--- a/drivers/rtc/rtc-ds1672.c
+++ b/drivers/rtc/rtc-ds1672.c
@@ -209,12 +209,18 @@ static int ds1672_probe(struct i2c_client *client,
 	return err;
 }
 
+static struct i2c_device_id ds1672_id[] = {
+	{ "ds1672", 0 },
+	{ }
+};
+
 static struct i2c_driver ds1672_driver = {
 	.driver = {
 		   .name = "rtc-ds1672",
 		   },
 	.probe = &ds1672_probe,
 	.remove = &ds1672_remove,
+	.id_table = ds1672_id,
 };
 
 static int __init ds1672_init(void)
diff --git a/drivers/rtc/rtc-max6900.c b/drivers/rtc/rtc-max6900.c
index 80782798763f..a4f6665ab3c5 100644
--- a/drivers/rtc/rtc-max6900.c
+++ b/drivers/rtc/rtc-max6900.c
@@ -247,12 +247,18 @@ max6900_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	return 0;
 }
 
+static struct i2c_device_id max6900_id[] = {
+	{ "max6900", 0 },
+	{ }
+};
+
 static struct i2c_driver max6900_driver = {
 	.driver = {
 		   .name = "rtc-max6900",
 		   },
 	.probe = max6900_probe,
 	.remove = max6900_remove,
+	.id_table = max6900_id,
 };
 
 static int __init max6900_init(void)
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index f59277bbedaa..7a568beba3f0 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -26,7 +26,7 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/plat-s3c/regs-rtc.h>
+#include <plat/regs-rtc.h>
 
 /* I have yet to find an S3C implementation with more than one
  * of these rtc blocks in */
diff --git a/drivers/rtc/rtc-starfire.c b/drivers/rtc/rtc-starfire.c
index 7ccb0dd700af..5be98bfd7ed3 100644
--- a/drivers/rtc/rtc-starfire.c
+++ b/drivers/rtc/rtc-starfire.c
@@ -6,7 +6,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/time.h>
 #include <linux/rtc.h>
 #include <linux/platform_device.h>
 
@@ -16,11 +15,6 @@ MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
 MODULE_DESCRIPTION("Starfire RTC driver");
 MODULE_LICENSE("GPL");
 
-struct starfire_rtc {
-	struct rtc_device	*rtc;
-	spinlock_t		lock;
-};
-
 static u32 starfire_get_time(void)
 {
 	static char obp_gettod[32];
@@ -35,64 +29,31 @@ static u32 starfire_get_time(void)
 
 static int starfire_read_time(struct device *dev, struct rtc_time *tm)
 {
-	struct starfire_rtc *p = dev_get_drvdata(dev);
-	unsigned long flags, secs;
-
-	spin_lock_irqsave(&p->lock, flags);
-	secs = starfire_get_time();
-	spin_unlock_irqrestore(&p->lock, flags);
-
-	rtc_time_to_tm(secs, tm);
-
-	return 0;
-}
-
-static int starfire_set_time(struct device *dev, struct rtc_time *tm)
-{
-	unsigned long secs;
-	int err;
-
-	err = rtc_tm_to_time(tm, &secs);
-	if (err)
-		return err;
-
-	/* Do nothing, time is set using the service processor
-	 * console on this platform.
-	 */
-	return 0;
+	rtc_time_to_tm(starfire_get_time(), tm);
+	return rtc_valid_tm(tm);
 }
 
 static const struct rtc_class_ops starfire_rtc_ops = {
 	.read_time	= starfire_read_time,
-	.set_time	= starfire_set_time,
 };
 
-static int __devinit starfire_rtc_probe(struct platform_device *pdev)
+static int __init starfire_rtc_probe(struct platform_device *pdev)
 {
-	struct starfire_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL);
-
-	if (!p)
-		return -ENOMEM;
+	struct rtc_device *rtc = rtc_device_register("starfire", &pdev->dev,
+				     &starfire_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
 
-	spin_lock_init(&p->lock);
+	platform_set_drvdata(pdev, rtc);
 
-	p->rtc = rtc_device_register("starfire", &pdev->dev,
-				     &starfire_rtc_ops, THIS_MODULE);
-	if (IS_ERR(p->rtc)) {
-		int err = PTR_ERR(p->rtc);
-		kfree(p);
-		return err;
-	}
-	platform_set_drvdata(pdev, p);
 	return 0;
 }
 
-static int __devexit starfire_rtc_remove(struct platform_device *pdev)
+static int __exit starfire_rtc_remove(struct platform_device *pdev)
 {
-	struct starfire_rtc *p = platform_get_drvdata(pdev);
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
 
-	rtc_device_unregister(p->rtc);
-	kfree(p);
+	rtc_device_unregister(rtc);
 
 	return 0;
 }
@@ -102,13 +63,12 @@ static struct platform_driver starfire_rtc_driver = {
 		.name	= "rtc-starfire",
 		.owner	= THIS_MODULE,
 	},
-	.probe		= starfire_rtc_probe,
-	.remove		= __devexit_p(starfire_rtc_remove),
+	.remove		= __exit_p(starfire_rtc_remove),
 };
 
 static int __init starfire_rtc_init(void)
 {
-	return platform_driver_register(&starfire_rtc_driver);
+	return platform_driver_probe(&starfire_rtc_driver, starfire_rtc_probe);
 }
 
 static void __exit starfire_rtc_exit(void)
diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c
index abe87a4d2665..01d8da9afdc8 100644
--- a/drivers/rtc/rtc-twl4030.c
+++ b/drivers/rtc/rtc-twl4030.c
@@ -337,7 +337,7 @@ static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd,
 }
 
 #else
-#define	omap_rtc_ioctl	NULL
+#define	twl4030_rtc_ioctl	NULL
 #endif
 
 static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 35364f64da7f..c557ba34e1aa 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -720,7 +720,6 @@ static int zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *act,
 		goto failed_openfcp;
 
 	atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &act->adapter->status);
-	schedule_work(&act->adapter->scan_work);
 
 	return ZFCP_ERP_SUCCEEDED;
 
@@ -1186,7 +1185,9 @@ static void zfcp_erp_scsi_scan(struct work_struct *work)
 		container_of(work, struct zfcp_erp_add_work, work);
 	struct zfcp_unit *unit = p->unit;
 	struct fc_rport *rport = unit->port->rport;
-	scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
+
+	if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
+		scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
 			 scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0);
 	atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status);
 	zfcp_unit_put(unit);
@@ -1282,6 +1283,8 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result)
 	case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
 		if (result != ZFCP_ERP_SUCCEEDED)
 			zfcp_erp_rports_del(adapter);
+		else
+			schedule_work(&adapter->scan_work);
 		zfcp_adapter_put(adapter);
 		break;
 	}
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 1a7c80a77ff5..8aab3091a7b1 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -50,7 +50,8 @@ static int zfcp_wka_port_get(struct zfcp_wka_port *wka_port)
 	if (mutex_lock_interruptible(&wka_port->mutex))
 		return -ERESTARTSYS;
 
-	if (wka_port->status != ZFCP_WKA_PORT_ONLINE) {
+	if (wka_port->status == ZFCP_WKA_PORT_OFFLINE ||
+	    wka_port->status == ZFCP_WKA_PORT_CLOSING) {
 		wka_port->status = ZFCP_WKA_PORT_OPENING;
 		if (zfcp_fsf_open_wka_port(wka_port))
 			wka_port->status = ZFCP_WKA_PORT_OFFLINE;
@@ -125,8 +126,7 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
 
 	read_lock_irqsave(&zfcp_data.config_lock, flags);
 	list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) {
-		/* FIXME: ZFCP_STATUS_PORT_DID_DID check is racy */
-		if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_DID_DID))
+		if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_PHYS_OPEN))
 			/* Try to connect to unused ports anyway. */
 			zfcp_erp_port_reopen(port,
 					     ZFCP_STATUS_COMMON_ERP_FAILED,
@@ -610,7 +610,6 @@ int zfcp_scan_ports(struct zfcp_adapter *adapter)
 	int ret, i;
 	struct zfcp_gpn_ft *gpn_ft;
 
-	zfcp_erp_wait(adapter); /* wait until adapter is finished with ERP */
 	if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT)
 		return 0;
 
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index d024442ee128..dc0367690405 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -930,8 +930,10 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id,
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND,
 				  req_flags, adapter->pool.fsf_req_abort);
-	if (IS_ERR(req))
+	if (IS_ERR(req)) {
+		req = NULL;
 		goto out;
+	}
 
 	if (unlikely(!(atomic_read(&unit->status) &
 		       ZFCP_STATUS_COMMON_UNBLOCKED)))
@@ -1584,6 +1586,7 @@ static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req)
 		wka_port->status = ZFCP_WKA_PORT_OFFLINE;
 		break;
 	case FSF_PORT_ALREADY_OPEN:
+		break;
 	case FSF_GOOD:
 		wka_port->handle = header->port_handle;
 		wka_port->status = ZFCP_WKA_PORT_ONLINE;
@@ -2113,18 +2116,21 @@ static inline void zfcp_fsf_trace_latency(struct zfcp_fsf_req *fsf_req)
 
 static void zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *req)
 {
-	struct scsi_cmnd *scpnt = req->data;
+	struct scsi_cmnd *scpnt;
 	struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *)
 	    &(req->qtcb->bottom.io.fcp_rsp);
 	u32 sns_len;
 	char *fcp_rsp_info = (unsigned char *) &fcp_rsp_iu[1];
 	unsigned long flags;
 
-	if (unlikely(!scpnt))
-		return;
-
 	read_lock_irqsave(&req->adapter->abort_lock, flags);
 
+	scpnt = req->data;
+	if (unlikely(!scpnt)) {
+		read_unlock_irqrestore(&req->adapter->abort_lock, flags);
+		return;
+	}
+
 	if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ABORTED)) {
 		set_host_byte(scpnt, DID_SOFT_ERROR);
 		set_driver_byte(scpnt, SUGGEST_RETRY);
@@ -2442,8 +2448,10 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter,
 		goto out;
 	req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
 				  adapter->pool.fsf_req_scsi);
-	if (IS_ERR(req))
+	if (IS_ERR(req)) {
+		req = NULL;
 		goto out;
+	}
 
 	req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT;
 	req->data = unit;
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index e46fd3e9f68f..468c880f8b6d 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -88,7 +88,7 @@ static int zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt,
 	ret = zfcp_fsf_send_fcp_command_task(adapter, unit, scpnt, 0,
 					     ZFCP_REQ_AUTO_CLEANUP);
 	if (unlikely(ret == -EBUSY))
-		zfcp_scsi_command_fail(scpnt, DID_NO_CONNECT);
+		return SCSI_MLQUEUE_DEVICE_BUSY;
 	else if (unlikely(ret < 0))
 		return SCSI_MLQUEUE_HOST_BUSY;
 
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 9aa301c1ed07..162cd927d94b 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -427,8 +427,8 @@ static int aac_slave_configure(struct scsi_device *sdev)
 		 * Firmware has an individual device recovery time typically
 		 * of 35 seconds, give us a margin.
 		 */
-		if (sdev->timeout < (45 * HZ))
-			sdev->timeout = 45 * HZ;
+		if (sdev->request_queue->rq_timeout < (45 * HZ))
+			blk_queue_rq_timeout(sdev->request_queue, 45*HZ);
 		for (cid = 0; cid < aac->maximum_num_containers; ++cid)
 			if (aac->fsa_dev[cid].valid)
 				++num_lsu;
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 218777bfc143..399fe559e4de 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -13872,8 +13872,10 @@ static int __devinit advansys_board_found(struct Scsi_Host *shost,
 	advansys_wide_free_mem(boardp);
 	free_irq(boardp->irq, shost);
  err_free_dma:
+#ifdef CONFIG_ISA
 	if (shost->dma_channel != NO_ISA_DMA)
 		free_dma(shost->dma_channel);
+#endif
  err_free_proc:
 	kfree(boardp->prtbuf);
  err_unmap:
@@ -13894,10 +13896,12 @@ static int advansys_release(struct Scsi_Host *shost)
 	ASC_DBG(1, "begin\n");
 	scsi_remove_host(shost);
 	free_irq(board->irq, shost);
+#ifdef CONFIG_ISA
 	if (shost->dma_channel != NO_ISA_DMA) {
 		ASC_DBG(1, "free_dma()\n");
 		free_dma(shost->dma_channel);
 	}
+#endif
 	if (ASC_NARROW_BOARD(board)) {
 		dma_unmap_single(board->dev,
 					board->dvc_var.asc_dvc_var.overrun_dma,
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index 9aec4ca64e56..f7da7530875e 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -107,6 +107,7 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
 	struct request *req;
 	int ret;
 
+retry:
 	req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
 	if (!req)
 		return SCSI_DH_RES_TEMP_UNAVAIL;
@@ -121,7 +122,6 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
 	memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
 	req->sense_len = 0;
 
-retry:
 	ret = blk_execute_rq(req->q, NULL, req, 1);
 	if (ret == -EIO) {
 		if (req->sense_len > 0) {
@@ -136,8 +136,10 @@ retry:
 		h->path_state = HP_SW_PATH_ACTIVE;
 		ret = SCSI_DH_OK;
 	}
-	if (ret == SCSI_DH_IMM_RETRY)
+	if (ret == SCSI_DH_IMM_RETRY) {
+		blk_put_request(req);
 		goto retry;
+	}
 	if (ret == SCSI_DH_DEV_OFFLINED) {
 		h->path_state = HP_SW_PATH_PASSIVE;
 		ret = SCSI_DH_OK;
@@ -200,6 +202,7 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h)
 	struct request *req;
 	int ret, retry;
 
+retry:
 	req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
 	if (!req)
 		return SCSI_DH_RES_TEMP_UNAVAIL;
@@ -216,7 +219,6 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h)
 	req->sense_len = 0;
 	retry = h->retries;
 
-retry:
 	ret = blk_execute_rq(req->q, NULL, req, 1);
 	if (ret == -EIO) {
 		if (req->sense_len > 0) {
@@ -231,8 +233,10 @@ retry:
 		ret = SCSI_DH_OK;
 
 	if (ret == SCSI_DH_RETRY) {
-		if (--retry)
+		if (--retry) {
+			blk_put_request(req);
 			goto retry;
+		}
 		ret = SCSI_DH_IO;
 	}
 
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index c387c15a2128..fb247fdfa2bd 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -588,7 +588,7 @@ static struct pci_driver gdth_pci_driver = {
 	.remove		= gdth_pci_remove_one,
 };
 
-static void gdth_pci_remove_one(struct pci_dev *pdev)
+static void __devexit gdth_pci_remove_one(struct pci_dev *pdev)
 {
 	gdth_ha_str *ha = pci_get_drvdata(pdev);
 
@@ -600,7 +600,7 @@ static void gdth_pci_remove_one(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-static int gdth_pci_init_one(struct pci_dev *pdev,
+static int __devinit gdth_pci_init_one(struct pci_dev *pdev,
 				       const struct pci_device_id *ent)
 {
 	ushort vendor = pdev->vendor;
@@ -853,7 +853,7 @@ static int __init gdth_init_isa(ulong32 bios_adr,gdth_ha_str *ha)
 #endif /* CONFIG_ISA */
 
 #ifdef CONFIG_PCI
-static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
+static int __devinit gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
 				   gdth_ha_str *ha)
 {
     register gdt6_dpram_str __iomem *dp6_ptr;
@@ -1237,7 +1237,7 @@ static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
 
 /* controller protocol functions */
 
-static void __init gdth_enable_int(gdth_ha_str *ha)
+static void __devinit gdth_enable_int(gdth_ha_str *ha)
 {
     ulong flags;
     gdt2_dpram_str __iomem *dp2_ptr;
@@ -1553,7 +1553,7 @@ static int gdth_internal_cmd(gdth_ha_str *ha, unchar service, ushort opcode,
 
 /* search for devices */
 
-static int __init gdth_search_drives(gdth_ha_str *ha)
+static int __devinit gdth_search_drives(gdth_ha_str *ha)
 {
     ushort cdev_cnt, i;
     int ok;
@@ -4935,7 +4935,7 @@ static int __init gdth_eisa_probe_one(ushort eisa_slot)
 #endif /* CONFIG_EISA */
 
 #ifdef CONFIG_PCI
-static int gdth_pci_probe_one(gdth_pci_str *pcistr,
+static int __devinit gdth_pci_probe_one(gdth_pci_str *pcistr,
 			     gdth_ha_str **ha_out)
 {
 	struct Scsi_Host *shp;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 87e09f35d3d4..6cad1758243a 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1442,7 +1442,7 @@ static int ibmvscsi_slave_configure(struct scsi_device *sdev)
 	spin_lock_irqsave(shost->host_lock, lock_flags);
 	if (sdev->type == TYPE_DISK) {
 		sdev->allow_restart = 1;
-		sdev->timeout = 60 * HZ;
+		blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
 	}
 	scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun);
 	spin_unlock_irqrestore(shost->host_lock, lock_flags);
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index a454f94623d7..17ce7abe17ee 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -1016,7 +1016,8 @@ static int megasas_slave_configure(struct scsi_device *sdev)
 	 * The RAID firmware may require extended timeouts.
 	 */
 	if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS)
-		sdev->timeout = MEGASAS_DEFAULT_CMD_TIMEOUT * HZ;
+		blk_queue_rq_timeout(sdev->request_queue,
+				     MEGASAS_DEFAULT_CMD_TIMEOUT * HZ);
 	return 0;
 }
 
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 386361778ebb..edfaf241c5ba 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -932,8 +932,7 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
 		int i, rtn = NEEDS_RETRY;
 
 		for (i = 0; rtn == NEEDS_RETRY && i < 2; i++)
-			rtn = scsi_send_eh_cmnd(scmd, stu_command, 6,
-						scmd->device->timeout, 0);
+			rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, scmd->device->request_queue->rq_timeout, 0);
 
 		if (rtn == SUCCESS)
 			return 0;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index f5d3b96890dc..fa45a1a66867 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -567,15 +567,18 @@ static inline int scsi_host_is_busy(struct Scsi_Host *shost)
  */
 static void scsi_run_queue(struct request_queue *q)
 {
-	struct scsi_device *starved_head = NULL, *sdev = q->queuedata;
+	struct scsi_device *sdev = q->queuedata;
 	struct Scsi_Host *shost = sdev->host;
+	LIST_HEAD(starved_list);
 	unsigned long flags;
 
 	if (scsi_target(sdev)->single_lun)
 		scsi_single_lun_run(sdev);
 
 	spin_lock_irqsave(shost->host_lock, flags);
-	while (!list_empty(&shost->starved_list) && !scsi_host_is_busy(shost)) {
+	list_splice_init(&shost->starved_list, &starved_list);
+
+	while (!list_empty(&starved_list)) {
 		int flagset;
 
 		/*
@@ -588,24 +591,18 @@ static void scsi_run_queue(struct request_queue *q)
 		 * scsi_request_fn must get the host_lock before checking
 		 * or modifying starved_list or starved_entry.
 		 */
-		sdev = list_entry(shost->starved_list.next,
-					  struct scsi_device, starved_entry);
-		/*
-		 * The *queue_ready functions can add a device back onto the
-		 * starved list's tail, so we must check for a infinite loop.
-		 */
-		if (sdev == starved_head)
+		if (scsi_host_is_busy(shost))
 			break;
-		if (!starved_head)
-			starved_head = sdev;
 
+		sdev = list_entry(starved_list.next,
+				  struct scsi_device, starved_entry);
+		list_del_init(&sdev->starved_entry);
 		if (scsi_target_is_busy(scsi_target(sdev))) {
 			list_move_tail(&sdev->starved_entry,
 				       &shost->starved_list);
 			continue;
 		}
 
-		list_del_init(&sdev->starved_entry);
 		spin_unlock(shost->host_lock);
 
 		spin_lock(sdev->request_queue->queue_lock);
@@ -621,6 +618,8 @@ static void scsi_run_queue(struct request_queue *q)
 
 		spin_lock(shost->host_lock);
 	}
+	/* put any unprocessed entries back */
+	list_splice(&starved_list, &shost->starved_list);
 	spin_unlock_irqrestore(shost->host_lock, flags);
 
 	blk_run_queue(q);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index c9e1242eaf25..5081b3981d3c 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -757,7 +757,7 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode,
 	 * access to the device is prohibited.
 	 */
 	error = scsi_nonblockable_ioctl(sdp, cmd, p,
-					(mode & FMODE_NDELAY_NOW) != 0);
+					(mode & FMODE_NDELAY) != 0);
 	if (!scsi_block_when_processing_errors(sdp) || !error)
 		return error;
 
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 62b6633e3a97..45b66b98a516 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -521,7 +521,7 @@ static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
 	 * if it doesn't recognise the ioctl
 	 */
 	ret = scsi_nonblockable_ioctl(sdev, cmd, argp,
-					(mode & FMODE_NDELAY_NOW) != 0);
+					(mode & FMODE_NDELAY) != 0);
 	if (ret != -ENODEV)
 		return ret;
 	return scsi_ioctl(sdev, cmd, argp);
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 3790906a77d1..2fa830c0be27 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -477,7 +477,7 @@ stex_slave_config(struct scsi_device *sdev)
 {
 	sdev->use_10_for_rw = 1;
 	sdev->use_10_for_ms = 1;
-	sdev->timeout = 60 * HZ;
+	blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
 	sdev->tagged_supported = 1;
 
 	return 0;
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 579d63a81aa2..b695ab3142d8 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on ARM && PLAT_S3C24XX
+	depends on ARM && PLAT_S3C
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -455,6 +455,16 @@ config SERIAL_SAMSUNG
 	  provide all of these ports, depending on how the serial port
 	  pins are configured.
 
+config SERIAL_SAMSUNG_UARTS
+	int
+	depends on SERIAL_SAMSUNG
+	default 2 if ARCH_S3C2400
+	default 4 if ARCH_S3C64XX || CPU_S3C2443
+	default 3
+	help
+	  Select the number of available UART ports for the Samsung S3C
+	  serial driver
+	
 config SERIAL_SAMSUNG_DEBUG
 	bool "Samsung SoC serial debug"
 	depends on SERIAL_SAMSUNG && DEBUG_LL
@@ -508,7 +518,20 @@ config SERIAL_S3C2440
 	help
 	  Serial port support for the Samsung S3C2440 and S3C2442 SoC
 
+config SERIAL_S3C24A0
+	tristate "Samsung S3C24A0 Serial port support"
+	depends on SERIAL_SAMSUNG && CPU_S3C24A0
+	default y if CPU_S3C24A0
+	help
+	  Serial port support for the Samsung S3C24A0 SoC
 
+config SERIAL_S3C6400
+	tristate "Samsung S3C6400/S3C6410 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410)
+	default y
+	help
+	  Serial port support for the Samsung S3C6400 and S3C6410
+	  SoCs
 
 config SERIAL_DZ
 	bool "DECstation DZ serial driver"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 0c17c8ddb19d..dfe775ac45b2 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -41,6 +41,8 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
 obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
 obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
+obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
+obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 71562689116f..e3a5ad5ef1d6 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -692,7 +692,7 @@ static int pl010_probe(struct amba_device *dev, void *id)
 		goto free;
 	}
 
-	uap->clk = clk_get(&dev->dev, "UARTCLK");
+	uap->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(uap->clk)) {
 		ret = PTR_ERR(uap->clk);
 		goto unmap;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index b7180046f8db..8b2b9700f3e4 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -756,7 +756,7 @@ static int pl011_probe(struct amba_device *dev, void *id)
 		goto free;
 	}
 
-	uap->clk = clk_get(&dev->dev, "UARTCLK");
+	uap->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(uap->clk)) {
 		ret = PTR_ERR(uap->clk);
 		goto unmap;
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 3f90f1bbbbcd..a50954612b60 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -66,7 +66,7 @@
 #define ONEMS 0xb0 /* One Millisecond register */
 #define UTS   0xb4 /* UART Test Register */
 #endif
-#ifdef CONFIG_ARCH_IMX
+#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -96,7 +96,7 @@
 #define  UCR1_RTSDEN     (1<<5)	 /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)	 /* Send break */
 #define  UCR1_TDMAEN     (1<<3)	 /* Transmitter ready DMA enable */
-#ifdef CONFIG_ARCH_IMX
+#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
 #define  UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled */
 #endif
 #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -187,11 +187,11 @@
 #define MAX_INTERNAL_IRQ	IMX_IRQS
 #endif
 
-#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#ifdef CONFIG_ARCH_MXC
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START	        16
 #define DEV_NAME		"ttymxc"
-#define MAX_INTERNAL_IRQ	MXC_MAX_INT_LINES
+#define MAX_INTERNAL_IRQ	MXC_INTERNAL_IRQS
 #endif
 
 /*
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 6dd98f9fb89c..ae3699d77dd0 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -2149,7 +2149,7 @@ out4:
 	return ret;
 }
 
-static struct ioc3_submodule ioc3uart_submodule = {
+static struct ioc3_submodule ioc3uart_ops = {
 	.name = "IOC3uart",
 	.probe = ioc3uart_probe,
 	.remove = ioc3uart_remove,
@@ -2173,7 +2173,7 @@ static int __devinit ioc3uart_init(void)
 		       __func__);
 		return ret;
 	}
-	ret = ioc3_register_submodule(&ioc3uart_submodule);
+	ret = ioc3_register_submodule(&ioc3uart_ops);
 	if (ret)
 		uart_unregister_driver(&ioc3_uart);
 	return ret;
@@ -2181,7 +2181,7 @@ static int __devinit ioc3uart_init(void)
 
 static void __devexit ioc3uart_exit(void)
 {
-	ioc3_unregister_submodule(&ioc3uart_submodule);
+	ioc3_unregister_submodule(&ioc3uart_ops);
 	uart_unregister_driver(&ioc3_uart);
 }
 
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 6117d3db0b66..28c00c3d58f5 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -591,8 +591,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 	/* Update the per-port timeout */
 	uart_update_timeout(port, new->c_cflag, baud);
 
-	/* Do our best to flush TX & RX, so we don't loose anything */
-	/* But we don't wait indefinitly ! */
+	/* Do our best to flush TX & RX, so we don't lose anything */
+	/* But we don't wait indefinitely ! */
 	j = 5000000;	/* Maximum wait */
 	/* FIXME Can't receive chars since set_termios might be called at early
 	 * boot for the console, all stuff is not yet ready to receive at that
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index a793d1fa1cde..f6e3b86bb0be 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -767,7 +767,7 @@ static int serial_pxa_probe(struct platform_device *dev)
 	if (!sport)
 		return -ENOMEM;
 
-	sport->clk = clk_get(&dev->dev, "UARTCLK");
+	sport->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(sport->clk)) {
 		ret = PTR_ERR(sport->clk);
 		goto err_free;
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 317d239ab740..29cbb0afef8e 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -177,5 +177,5 @@ module_exit(s3c2440_serial_exit);
 
 MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPLi v2");
+MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:s3c2440-uart");
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
new file mode 100644
index 000000000000..ebf2fd3c8f7d
--- /dev/null
+++ b/drivers/serial/s3c24a0.c
@@ -0,0 +1,118 @@
+/* linux/drivers/serial/s3c24a0.c
+ *
+ * Driver for Samsung S3C24A0 SoC onboard UARTs.
+ *
+ * Based on drivers/serial/s3c2410.c
+ *
+ * Author: Sandeep Patil <sandeep.patil@azingo.com>
+ *
+ * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+
+#include "samsung.h"
+
+static int s3c24a0_serial_setsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	if (strcmp(clk->name, "uclk") == 0)
+		ucon |= S3C2410_UCON_UCLK;
+	else
+		ucon &= ~S3C2410_UCON_UCLK;
+
+	wr_regl(port, S3C2410_UCON, ucon);
+	return 0;
+}
+
+static int s3c24a0_serial_getsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	clk->divisor = 1;
+	clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
+
+	return 0;
+}
+
+static int s3c24a0_serial_resetport(struct uart_port *port,
+				    struct s3c2410_uartcfg *cfg)
+{
+	dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n",
+	    port, port->mapbase, cfg);
+
+	wr_regl(port, S3C2410_UCON,  cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+	/* reset both fifos */
+
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	return 0;
+}
+
+static struct s3c24xx_uart_info s3c24a0_uart_inf = {
+	.name		= "Samsung S3C24A0 UART",
+	.type		= PORT_S3C2410,
+	.fifosize	= 16,
+	.rx_fifomask	= S3C24A0_UFSTAT_RXMASK,
+	.rx_fifoshift	= S3C24A0_UFSTAT_RXSHIFT,
+	.rx_fifofull	= S3C24A0_UFSTAT_RXFULL,
+	.tx_fifofull	= S3C24A0_UFSTAT_TXFULL,
+	.tx_fifomask	= S3C24A0_UFSTAT_TXMASK,
+	.tx_fifoshift	= S3C24A0_UFSTAT_TXSHIFT,
+	.get_clksrc	= s3c24a0_serial_getsource,
+	.set_clksrc	= s3c24a0_serial_setsource,
+	.reset_port	= s3c24a0_serial_resetport,
+};
+
+static int s3c24a0_serial_probe(struct platform_device *dev)
+{
+	return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
+}
+
+static struct platform_driver s3c24a0_serial_drv = {
+	.probe		= s3c24a0_serial_probe,
+	.remove		= s3c24xx_serial_remove,
+	.driver		= {
+		.name	= "s3c24a0-uart",
+		.owner	= THIS_MODULE,
+	},
+};
+
+s3c24xx_console_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+
+static int __init s3c24a0_serial_init(void)
+{
+	return s3c24xx_serial_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
+}
+
+static void __exit s3c24a0_serial_exit(void)
+{
+	platform_driver_unregister(&s3c24a0_serial_drv);
+}
+
+module_init(s3c24a0_serial_init);
+module_exit(s3c24a0_serial_exit);
+
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
new file mode 100644
index 000000000000..06936d13393f
--- /dev/null
+++ b/drivers/serial/s3c6400.c
@@ -0,0 +1,151 @@
+/* linux/drivers/serial/s3c6400.c
+ *
+ * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs.
+ *
+ * Copyright 2008 Openmoko,  Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+
+#include "samsung.h"
+
+static int s3c6400_serial_setsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	if (strcmp(clk->name, "uclk0") == 0) {
+		ucon &= ~S3C6400_UCON_CLKMASK;
+		ucon |= S3C6400_UCON_UCLK0;
+	} else if (strcmp(clk->name, "uclk1") == 0)
+		ucon |= S3C6400_UCON_UCLK1;
+	else if (strcmp(clk->name, "pclk") == 0) {
+		/* See notes about transitioning from UCLK to PCLK */
+		ucon &= ~S3C6400_UCON_UCLK0;
+	} else {
+		printk(KERN_ERR "unknown clock source %s\n", clk->name);
+		return -EINVAL;
+	}
+
+	wr_regl(port, S3C2410_UCON, ucon);
+	return 0;
+}
+
+
+static int s3c6400_serial_getsource(struct uart_port *port,
+				    struct s3c24xx_uart_clksrc *clk)
+{
+	u32 ucon = rd_regl(port, S3C2410_UCON);
+
+	clk->divisor = 1;
+
+	switch (ucon & S3C6400_UCON_CLKMASK) {
+	case S3C6400_UCON_UCLK0:
+		clk->name = "uclk0";
+		break;
+
+	case S3C6400_UCON_UCLK1:
+		clk->name = "uclk1";
+		break;
+
+	case S3C6400_UCON_PCLK:
+	case S3C6400_UCON_PCLK2:
+		clk->name = "pclk";
+		break;
+	}
+
+	return 0;
+}
+
+static int s3c6400_serial_resetport(struct uart_port *port,
+				    struct s3c2410_uartcfg *cfg)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n",
+	    port, port->mapbase, cfg);
+
+	/* ensure we don't change the clock settings... */
+
+	ucon &= S3C6400_UCON_CLKMASK;
+
+	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+	/* reset both fifos */
+
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	return 0;
+}
+
+static struct s3c24xx_uart_info s3c6400_uart_inf = {
+	.name		= "Samsung S3C6400 UART",
+	.type		= PORT_S3C6400,
+	.fifosize	= 64,
+	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+	.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+	.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+	.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+	.get_clksrc	= s3c6400_serial_getsource,
+	.set_clksrc	= s3c6400_serial_setsource,
+	.reset_port	= s3c6400_serial_resetport,
+};
+
+/* device management */
+
+static int s3c6400_serial_probe(struct platform_device *dev)
+{
+	dbg("s3c6400_serial_probe: dev=%p\n", dev);
+	return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
+}
+
+static struct platform_driver s3c6400_serial_drv = {
+	.probe		= s3c6400_serial_probe,
+	.remove		= s3c24xx_serial_remove,
+	.driver		= {
+		.name	= "s3c6400-uart",
+		.owner	= THIS_MODULE,
+	},
+};
+
+s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+
+static int __init s3c6400_serial_init(void)
+{
+	return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
+}
+
+static void __exit s3c6400_serial_exit(void)
+{
+	platform_driver_unregister(&s3c6400_serial_drv);
+}
+
+module_init(s3c6400_serial_init);
+module_exit(s3c6400_serial_exit);
+
+MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c6400-uart");
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1e219d3d0352..41ac94872b8d 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -42,13 +42,14 @@
 #include <linux/serial.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
 
 #include <asm/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/map.h>
 
 #include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
 
 #include "samsung.h"
 
@@ -58,19 +59,6 @@
 #define S3C24XX_SERIAL_MAJOR	204
 #define S3C24XX_SERIAL_MINOR	64
 
-/* we can support 3 uarts, but not always use them */
-
-#ifdef CONFIG_CPU_S3C2400
-#define NR_PORTS (2)
-#else
-#define NR_PORTS (3)
-#endif
-
-/* port irq numbers */
-
-#define TX_IRQ(port) ((port)->irq + 1)
-#define RX_IRQ(port) ((port)->irq)
-
 /* macros to change one thing to another */
 
 #define tx_enabled(port) ((port)->unused[0])
@@ -136,8 +124,10 @@ static void s3c24xx_serial_rx_disable(struct uart_port *port)
 
 static void s3c24xx_serial_stop_tx(struct uart_port *port)
 {
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
 	if (tx_enabled(port)) {
-		disable_irq(TX_IRQ(port));
+		disable_irq(ourport->tx_irq);
 		tx_enabled(port) = 0;
 		if (port->flags & UPF_CONS_FLOW)
 			s3c24xx_serial_rx_enable(port);
@@ -146,11 +136,13 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
 
 static void s3c24xx_serial_start_tx(struct uart_port *port)
 {
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
 	if (!tx_enabled(port)) {
 		if (port->flags & UPF_CONS_FLOW)
 			s3c24xx_serial_rx_disable(port);
 
-		enable_irq(TX_IRQ(port));
+		enable_irq(ourport->tx_irq);
 		tx_enabled(port) = 1;
 	}
 }
@@ -158,9 +150,11 @@ static void s3c24xx_serial_start_tx(struct uart_port *port)
 
 static void s3c24xx_serial_stop_rx(struct uart_port *port)
 {
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
 	if (rx_enabled(port)) {
 		dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
-		disable_irq(RX_IRQ(port));
+		disable_irq(ourport->rx_irq);
 		rx_enabled(port) = 0;
 	}
 }
@@ -384,13 +378,13 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 
 	if (ourport->tx_claimed) {
-		free_irq(TX_IRQ(port), ourport);
+		free_irq(ourport->tx_irq, ourport);
 		tx_enabled(port) = 0;
 		ourport->tx_claimed = 0;
 	}
 
 	if (ourport->rx_claimed) {
-		free_irq(RX_IRQ(port), ourport);
+		free_irq(ourport->rx_irq, ourport);
 		ourport->rx_claimed = 0;
 		rx_enabled(port) = 0;
 	}
@@ -407,12 +401,11 @@ static int s3c24xx_serial_startup(struct uart_port *port)
 
 	rx_enabled(port) = 1;
 
-	ret = request_irq(RX_IRQ(port),
-			  s3c24xx_serial_rx_chars, 0,
+	ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0,
 			  s3c24xx_serial_portname(port), ourport);
 
 	if (ret != 0) {
-		printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port));
+		printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq);
 		return ret;
 	}
 
@@ -422,12 +415,11 @@ static int s3c24xx_serial_startup(struct uart_port *port)
 
 	tx_enabled(port) = 1;
 
-	ret = request_irq(TX_IRQ(port),
-			  s3c24xx_serial_tx_chars, 0,
+	ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0,
 			  s3c24xx_serial_portname(port), ourport);
 
 	if (ret) {
-		printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port));
+		printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq);
 		goto err;
 	}
 
@@ -452,6 +444,8 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
 {
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 
+	ourport->pm_level = level;
+
 	switch (level) {
 	case 3:
 		if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
@@ -661,6 +655,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 		ourport->clksrc = clksrc;
 		ourport->baudclk = clk;
+		ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
 	}
 
 	switch (termios->c_cflag & CSIZE) {
@@ -752,6 +747,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port)
 		return "S3C2440";
 	case PORT_S3C2412:
 		return "S3C2412";
+	case PORT_S3C6400:
+		return "S3C6400/10";
 	default:
 		return NULL;
 	}
@@ -827,14 +824,14 @@ static struct uart_ops s3c24xx_serial_ops = {
 static struct uart_driver s3c24xx_uart_drv = {
 	.owner		= THIS_MODULE,
 	.dev_name	= "s3c2410_serial",
-	.nr		= 3,
+	.nr		= CONFIG_SERIAL_SAMSUNG_UARTS,
 	.cons		= S3C24XX_SERIAL_CONSOLE,
 	.driver_name	= S3C24XX_SERIAL_NAME,
 	.major		= S3C24XX_SERIAL_MAJOR,
 	.minor		= S3C24XX_SERIAL_MINOR,
 };
 
-static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
+static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
 	[0] = {
 		.port = {
 			.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
@@ -859,7 +856,7 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
 			.line		= 1,
 		}
 	},
-#if NR_PORTS > 2
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 2
 
 	[2] = {
 		.port = {
@@ -872,6 +869,20 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
 			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 2,
 		}
+	},
+#endif
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+	[3] = {
+		.port = {
+			.lock		= __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock),
+			.iotype		= UPIO_MEM,
+			.irq		= IRQ_S3CUART_RX3,
+			.uartclk	= 0,
+			.fifosize	= 16,
+			.ops		= &s3c24xx_serial_ops,
+			.flags		= UPF_BOOT_AUTOCONF,
+			.line		= 3,
+		}
 	}
 #endif
 };
@@ -890,6 +901,89 @@ static inline int s3c24xx_serial_resetport(struct uart_port *port,
 	return (info->reset_port)(port, cfg);
 }
 
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
+					     unsigned long val, void *data)
+{
+	struct s3c24xx_uart_port *port;
+	struct uart_port *uport;
+
+	port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
+	uport = &port->port;
+
+	/* check to see if port is enabled */
+
+	if (port->pm_level != 0)
+		return 0;
+
+	/* try and work out if the baudrate is changing, we can detect
+	 * a change in rate, but we do not have support for detecting
+	 * a disturbance in the clock-rate over the change.
+	 */
+
+	if (IS_ERR(port->clk))
+		goto exit;
+
+	if (port->baudclk_rate == clk_get_rate(port->clk))
+		goto exit;
+
+	if (val == CPUFREQ_PRECHANGE) {
+		/* we should really shut the port down whilst the
+		 * frequency change is in progress. */
+
+	} else if (val == CPUFREQ_POSTCHANGE) {
+		struct ktermios *termios;
+		struct tty_struct *tty;
+
+		if (uport->info == NULL)
+			goto exit;
+
+		tty = uport->info->port.tty;
+
+		if (tty == NULL)
+			goto exit;
+
+		termios = tty->termios;
+
+		if (termios == NULL) {
+			printk(KERN_WARNING "%s: no termios?\n", __func__);
+			goto exit;
+		}
+
+		s3c24xx_serial_set_termios(uport, termios, NULL);
+	}
+
+ exit:
+	return 0;
+}
+
+static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+	port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
+
+	return cpufreq_register_notifier(&port->freq_transition,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+	cpufreq_unregister_notifier(&port->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+	return 0;
+}
+
+static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+}
+#endif
+
 /* s3c24xx_serial_init_port
  *
  * initialise a single serial port from the platform device given
@@ -914,8 +1008,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 	if (port->mapbase != 0)
 		return 0;
 
-	if (cfg->hwport > 3)
-		return -EINVAL;
+	if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) {
+		printk(KERN_ERR "%s: port %d bigger than %d\n", __func__,
+		       cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS);
+		return -ERANGE;
+	}
 
 	/* setup info for port */
 	port->dev	= &platdev->dev;
@@ -943,18 +1040,26 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 
 	dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
 
-	port->mapbase	= res->start;
-	port->membase	= S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
+	port->mapbase = res->start;
+	port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000);
 	ret = platform_get_irq(platdev, 0);
 	if (ret < 0)
 		port->irq = 0;
-	else
+	else {
 		port->irq = ret;
+		ourport->rx_irq = ret;
+		ourport->tx_irq = ret + 1;
+	}
+	
+	ret = platform_get_irq(platdev, 1);
+	if (ret > 0)
+		ourport->tx_irq = ret;
 
 	ourport->clk	= clk_get(&platdev->dev, "uart");
 
-	dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
-	    port->mapbase, port->membase, port->irq, port->uartclk);
+	dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n",
+	    port->mapbase, port->membase, port->irq,
+	    ourport->rx_irq, ourport->tx_irq, port->uartclk);
 
 	/* reset the fifos (and setup the uart) */
 	s3c24xx_serial_resetport(port, cfg);
@@ -1002,6 +1107,10 @@ int s3c24xx_serial_probe(struct platform_device *dev,
 	if (ret < 0)
 		printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
 
+	ret = s3c24xx_serial_cpufreq_register(ourport);
+	if (ret < 0)
+		dev_err(&dev->dev, "failed to add cpufreq notifier\n");
+
 	return 0;
 
  probe_err:
@@ -1015,6 +1124,7 @@ int s3c24xx_serial_remove(struct platform_device *dev)
 	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
 
 	if (port) {
+		s3c24xx_serial_cpufreq_deregister(to_ourport(port));
 		device_remove_file(&dev->dev, &dev_attr_clock_source);
 		uart_remove_one_port(&s3c24xx_uart_drv, port);
 	}
@@ -1219,7 +1329,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
 
 	platdev_ptr = s3c24xx_uart_devs;
 
-	for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) {
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
 		s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
 	}
 
@@ -1240,7 +1350,7 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
 
 	/* is this a valid port */
 
-	if (co->index == -1 || co->index >= NR_PORTS)
+	if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
 		co->index = 0;
 
 	port = &s3c24xx_serial_ports[co->index].port;
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 5c92ebbe7d9e..571d6b90d206 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -33,12 +33,21 @@ struct s3c24xx_uart_info {
 struct s3c24xx_uart_port {
 	unsigned char			rx_claimed;
 	unsigned char			tx_claimed;
+	unsigned int			pm_level;
+	unsigned long			baudclk_rate;
+
+	unsigned int			rx_irq;
+	unsigned int			tx_irq;
 
 	struct s3c24xx_uart_info	*info;
 	struct s3c24xx_uart_clksrc	*clksrc;
 	struct clk			*clk;
 	struct clk			*baudclk;
 	struct uart_port		port;
+
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block		freq_transition;
+#endif
 };
 
 /* conversion functions */
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index 61dc8b3daa26..a7bf024a8286 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -41,9 +41,10 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
+#include <mach/hardware.h>
 
 #define DEV_MAJOR	204
 #define DEV_MINOR	16
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 6a3f8fb0c9dd..3317148a4b93 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -286,8 +286,8 @@ static void ulite_release_port(struct uart_port *port)
 
 static int ulite_request_port(struct uart_port *port)
 {
-	pr_debug("ulite console: port=%p; port->mapbase=%x\n",
-		 port, port->mapbase);
+	pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
+		 port, (unsigned long long) port->mapbase);
 
 	if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
 		dev_err(port->dev, "Memory region busy\n");
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 87b73e0169c5..b02f25c702fd 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -369,10 +369,23 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t)
 	dma_rx_addr = t->rx_dma;
 
 	/*
-	 * check if buffers are already dma mapped, map them otherwise
+	 * check if buffers are already dma mapped, map them otherwise:
+	 * - first map the TX buffer, so cache data gets written to memory
+	 * - then map the RX buffer, so that cache entries (with
+	 *   soon-to-be-stale data) get removed
 	 * use rx buffer in place of tx if tx buffer was not provided
 	 * use temp rx buffer (preallocated or realloc to fit) for rx dma
 	 */
+	if (t->tx_buf) {
+		if (t->tx_dma == 0) {	/* if DMA_ADDR_INVALID, map it */
+			dma_tx_addr = dma_map_single(hw->dev,
+					(void *)t->tx_buf,
+					t->len, DMA_TO_DEVICE);
+			if (dma_mapping_error(hw->dev, dma_tx_addr))
+				dev_err(hw->dev, "tx dma map error\n");
+		}
+	}
+
 	if (t->rx_buf) {
 		if (t->rx_dma == 0) {	/* if DMA_ADDR_INVALID, map it */
 			dma_rx_addr = dma_map_single(hw->dev,
@@ -396,15 +409,8 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t)
 		dma_sync_single_for_device(hw->dev, dma_rx_addr,
 			t->len, DMA_FROM_DEVICE);
 	}
-	if (t->tx_buf) {
-		if (t->tx_dma == 0) {	/* if DMA_ADDR_INVALID, map it */
-			dma_tx_addr = dma_map_single(hw->dev,
-					(void *)t->tx_buf,
-					t->len, DMA_TO_DEVICE);
-			if (dma_mapping_error(hw->dev, dma_tx_addr))
-				dev_err(hw->dev, "tx dma map error\n");
-		}
-	} else {
+
+	if (!t->tx_buf) {
 		dma_sync_single_for_device(hw->dev, dma_rx_addr,
 				t->len, DMA_BIDIRECTIONAL);
 		hw->tx = hw->rx;
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 0debe11b67b4..3b97803e1d11 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -142,6 +142,7 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi,
 	unsigned rfalarm;
 	unsigned send_at_once = MPC52xx_PSC_BUFSIZE;
 	unsigned recv_at_once;
+	int last_block = 0;
 
 	if (!t->tx_buf && !t->rx_buf && t->len)
 		return -EINVAL;
@@ -151,15 +152,17 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi,
 	while (rb < t->len) {
 		if (t->len - rb > MPC52xx_PSC_BUFSIZE) {
 			rfalarm = MPC52xx_PSC_RFALARM;
+			last_block = 0;
 		} else {
 			send_at_once = t->len - sb;
 			rfalarm = MPC52xx_PSC_BUFSIZE - (t->len - rb);
+			last_block = 1;
 		}
 
 		dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once);
 		for (; send_at_once; sb++, send_at_once--) {
 			/* set EOF flag before the last word is sent */
-			if (send_at_once == 1)
+			if (send_at_once == 1 && last_block)
 				out_8(&psc->ircr2, 0x01);
 
 			if (tx_buf)
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index cf12f2d84be2..6104f461a3cd 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -32,8 +32,8 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/delay.h>
-#include <asm/dma.h>
 
+#include <mach/dma.h>
 #include <mach/hardware.h>
 #include <mach/pxa-regs.h>
 #include <mach/regs-ssp.h>
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 0b4db0ce78d6..269a55ec52ef 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -1456,7 +1456,7 @@ static int __init spi_imx_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct spi_imx_master *platform_info;
 	struct spi_master *master;
-	struct driver_data *drv_data = NULL;
+	struct driver_data *drv_data;
 	struct resource *res;
 	int irq, status = 0;
 
@@ -1467,14 +1467,6 @@ static int __init spi_imx_probe(struct platform_device *pdev)
 		goto err_no_pdata;
 	}
 
-	drv_data->clk = clk_get(&pdev->dev, "perclk2");
-	if (IS_ERR(drv_data->clk)) {
-		dev_err(&pdev->dev, "probe - cannot get get\n");
-		status = PTR_ERR(drv_data->clk);
-		goto err_no_clk;
-	}
-	clk_enable(drv_data->clk);
-
 	/* Allocate master with space for drv_data */
 	master = spi_alloc_master(dev, sizeof(struct driver_data));
 	if (!master) {
@@ -1495,6 +1487,14 @@ static int __init spi_imx_probe(struct platform_device *pdev)
 
 	drv_data->dummy_dma_buf = SPI_DUMMY_u32;
 
+	drv_data->clk = clk_get(&pdev->dev, "perclk2");
+	if (IS_ERR(drv_data->clk)) {
+		dev_err(&pdev->dev, "probe - cannot get clock\n");
+		status = PTR_ERR(drv_data->clk);
+		goto err_no_clk;
+	}
+	clk_enable(drv_data->clk);
+
 	/* Find and map resources */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -1630,12 +1630,13 @@ err_no_iomap:
 	kfree(drv_data->ioarea);
 
 err_no_iores:
-	spi_master_put(master);
-
-err_no_pdata:
 	clk_disable(drv_data->clk);
 	clk_put(drv_data->clk);
+
 err_no_clk:
+	spi_master_put(master);
+
+err_no_pdata:
 err_no_mem:
 	return status;
 }
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index c252cbac00f1..256d18395a23 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -28,7 +28,7 @@
 #include <mach/hardware.h>
 
 #include <mach/regs-gpio.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
+#include <plat/regs-spi.h>
 #include <mach/spi.h>
 
 struct s3c24xx_spi {
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index cc1f647f579b..f2447a5476bb 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -34,7 +34,7 @@ struct s3c2410_spigpio {
 
 static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi)
 {
-	return spi->controller_data;
+	return spi_master_get_devdata(spi->master);
 }
 
 static inline void setsck(struct spi_device *dev, int on)
@@ -118,6 +118,7 @@ static int s3c2410_spigpio_probe(struct platform_device *dev)
 	/* setup spi bitbang adaptor */
 	sp->bitbang.master = spi_master_get(master);
 	sp->bitbang.master->bus_num = info->bus_num;
+	sp->bitbang.master->num_chipselect = info->num_chipselect;
 	sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
 
 	sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 89a43755a453..5d869c4d3eb2 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -597,7 +597,9 @@ static int spidev_probe(struct spi_device *spi)
 	}
 	mutex_unlock(&device_list_lock);
 
-	if (status != 0)
+	if (status == 0)
+		spi_set_drvdata(spi, spidev);
+	else
 		kfree(spidev);
 
 	return status;
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 1fe8b44787b3..b3408ff39fba 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2363,6 +2363,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 		nuke(loop_ep, -ESHUTDOWN);
 	spin_unlock_irqrestore(&udc_controller->lock, flags);
 
+	/* report disconnect; the controller is already quiesced */
+	driver->disconnect(&udc_controller->gadget);
+
 	/* unbind gadget and unhook driver. */
 	driver->unbind(&udc_controller->gadget);
 	udc_controller->gadget.dev.driver = NULL;
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 091bb55c9aa7..f3c6703cffda 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1836,6 +1836,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 		nuke(loop_ep, -ESHUTDOWN);
 	spin_unlock_irqrestore(&udc_controller->lock, flags);
 
+	/* report disconnect; the controller is already quiesced */
+	driver->disconnect(&udc_controller->gadget);
+
 	/* unbind gadget and unhook driver. */
 	driver->unbind(&udc_controller->gadget);
 	udc_controller->gadget.dev.driver = NULL;
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index da6e93c201d2..8c5026be79d4 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -141,7 +141,11 @@ static int is_vbus_present(void)
 
 	if (mach->gpio_vbus) {
 		int value = gpio_get_value(mach->gpio_vbus);
-		return mach->gpio_vbus_inverted ? !value : value;
+
+		if (mach->gpio_vbus_inverted)
+			return !value;
+		else
+			return !!value;
 	}
 	if (mach->udc_is_connected)
 		return mach->udc_is_connected();
@@ -982,7 +986,7 @@ static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 	struct pxa25x_udc	*udc;
 
 	udc = container_of(_gadget, struct pxa25x_udc, gadget);
-	udc->vbus = (is_active != 0);
+	udc->vbus = is_active;
 	DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
 	pullup(udc);
 	return 0;
@@ -1399,12 +1403,8 @@ lubbock_vbus_irq(int irq, void *_dev)
 static irqreturn_t udc_vbus_irq(int irq, void *_dev)
 {
 	struct pxa25x_udc	*dev = _dev;
-	int			vbus = gpio_get_value(dev->mach->gpio_vbus);
 
-	if (dev->mach->gpio_vbus_inverted)
-		vbus = !vbus;
-
-	pxa25x_udc_vbus_session(&dev->gadget, vbus);
+	pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
 	return IRQ_HANDLED;
 }
 
@@ -2145,7 +2145,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return -ENODEV;
 
-	dev->clk = clk_get(&pdev->dev, "UDCCLK");
+	dev->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
 		retval = PTR_ERR(dev->clk);
 		goto err_clk;
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index caa37c95802c..944e4ff641df 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -2226,7 +2226,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 	udc->dev = &pdev->dev;
 	udc->mach = pdev->dev.platform_data;
 
-	udc->clk = clk_get(&pdev->dev, "UDCCLK");
+	udc->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(udc->clk)) {
 		retval = PTR_ERR(udc->clk);
 		goto err_clk;
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 00ba06b44752..8d8d65165983 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -53,8 +53,8 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
-#include <asm/plat-s3c24xx/regs-udc.h>
-#include <asm/plat-s3c24xx/udc.h>
+#include <plat/regs-udc.h>
+#include <plat/udc.h>
 
 
 #include "s3c2410_udc.h"
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 5416cf969005..9d487908012e 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -33,8 +33,9 @@
 /*
  * Implement Orion USB controller specification guidelines
  */
-static void orion_usb_setup(struct usb_hcd *hcd)
+static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
 {
+	/* The below GLs are according to the Orion Errata document */
 	/*
 	 * Clear interrupt cause and mask
 	 */
@@ -258,9 +259,19 @@ static int __init ehci_orion_drv_probe(struct platform_device *pdev)
 		ehci_orion_conf_mbus_windows(hcd, pd->dram);
 
 	/*
-	 * setup Orion USB controller
+	 * setup Orion USB controller.
 	 */
-	orion_usb_setup(hcd);
+	switch (pd->phy_version) {
+	case EHCI_PHY_NA:	/* dont change USB phy settings */
+		break;
+	case EHCI_PHY_ORION:
+		orion_usb_phy_v1_setup(hcd);
+		break;
+	case EHCI_PHY_DD:
+	case EHCI_PHY_KW:
+	default:
+		printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n");
+	}
 
 	err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
 	if (err)
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 9d0ea573aef6..36864f958444 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -169,18 +169,21 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		}
 		break;
 	case PCI_VENDOR_ID_ATI:
-		/* SB700 old version has a bug in EHCI controller,
+		/* SB600 and old version of SB700 have a bug in EHCI controller,
 		 * which causes usb devices lose response in some cases.
 		 */
-		if (pdev->device == 0x4396) {
+		if ((pdev->device == 0x4386) || (pdev->device == 0x4396)) {
 			p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
 						 PCI_DEVICE_ID_ATI_SBX00_SMBUS,
 						 NULL);
 			if (!p_smbus)
 				break;
 			rev = p_smbus->revision;
-			if ((rev == 0x3a) || (rev == 0x3b)) {
+			if ((pdev->device == 0x4386) || (rev == 0x3a)
+			    || (rev == 0x3b)) {
 				u8 tmp;
+				ehci_info(ehci, "applying AMD SB600/SB700 USB "
+					"freeze workaround\n");
 				pci_read_config_byte(pdev, 0x53, &tmp);
 				pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
 			}
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index b11798d17ae5..c7d4b5a06bdb 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -183,16 +183,14 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
 	 * the async ring; just the I/O watchdog.  Note that if a
 	 * SHRINK were pending, OFF would never be requested.
 	 */
-	enum ehci_timer_action oldactions = ehci->actions;
+	if (timer_pending(&ehci->watchdog)
+			&& ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+				& ehci->actions))
+		return;
 
 	if (!test_and_set_bit (action, &ehci->actions)) {
 		unsigned long t;
 
-		if (timer_pending(&ehci->watchdog)
-			&& ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
-				& oldactions))
-			return;
-
 		switch (action) {
 		case TIMER_IO_WATCHDOG:
 			t = EHCI_IO_JIFFIES;
@@ -208,7 +206,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
 			t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
 			break;
 		}
-		mod_timer(&ehci->watchdog, round_jiffies(t + jiffies));
+		mod_timer(&ehci->watchdog, t + jiffies);
 	}
 }
 
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 91697bdb399f..4bbddb73abd9 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -18,6 +18,7 @@
 #include <linux/jiffies.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/io.h>
@@ -25,7 +26,6 @@
 
 #include <mach/mux.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 #include <mach/fpga.h>
 #include <mach/usb.h>
 
@@ -254,8 +254,8 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 
 			/* gpio9 for overcurrent detction */
 			omap_cfg_reg(W8_1610_GPIO9);
-			omap_request_gpio(9);
-			omap_set_gpio_direction(9, 1 /* IN */);
+			gpio_request(9, "OHCI overcurrent");
+			gpio_direction_input(9);
 
 			/* for paranoia's sake:  disable USB.PUEN */
 			omap_cfg_reg(W4_USB_HIGHZ);
@@ -407,7 +407,7 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 		put_device(ohci->transceiver->dev);
 	}
 	if (machine_is_omap_osk())
-		omap_free_gpio(9);
+		gpio_free(9);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index e294d430733b..e44dc2cbca24 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -296,7 +296,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
 		return -ENXIO;
 	}
 
-	usb_clk = clk_get(&pdev->dev, "USBCLK");
+	usb_clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(usb_clk))
 		return PTR_ERR(usb_clk);
 
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 5b20de130e08..5b95009d2fbb 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -135,6 +135,7 @@ static int usb_console_setup(struct console *co, char *options)
 				err("no more memory");
 				goto reset_open_count;
 			}
+			kref_init(&tty->kref);
 			termios = kzalloc(sizeof(*termios), GFP_KERNEL);
 			if (!termios) {
 				retval = -ENOMEM;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 51d7bdea2869..aad1359a3eb1 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1498,7 +1498,7 @@ static int ftdi_open(struct tty_struct *tty,
 			priv->interface, buf, 0, WDR_TIMEOUT);
 
 	/* Termios defaults are set by usb_serial_init. We don't change
-	   port->tty->termios - this would loose speed settings, etc.
+	   port->tty->termios - this would lose speed settings, etc.
 	   This is same behaviour as serial.c/rs_open() - Kuba */
 
 	/* ftdi_set_termios  will send usb control messages */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6fa1ec441b61..809697b3c7fc 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -224,6 +224,7 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define ONDA_VENDOR_ID				0x19d2
 #define ONDA_PRODUCT_MSA501HS			0x0001
 #define ONDA_PRODUCT_ET502HS			0x0002
+#define ONDA_PRODUCT_MT503HS			0x0200
 
 #define BANDRICH_VENDOR_ID			0x1A8D
 #define BANDRICH_PRODUCT_C100_1			0x1002
@@ -413,6 +414,40 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0003) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0004) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0005) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0006) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0007) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0008) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0009) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000a) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000b) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000c) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000d) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000e) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000f) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0010) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0011) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0012) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0013) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0014) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0015) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0016) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0017) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0018) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0019) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0020) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0021) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0022) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0023) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0024) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0025) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0026) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0027) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0028) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0029) },
+	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) },
 	{ USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 6da9a7a962a8..e61f2bfc64ad 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -318,6 +318,18 @@ UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
 		US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
 #endif
 
+/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
+ * Obviously the PROM has not been customized by the VAR;
+ * the Vendor and Product string descriptors are:
+ *	Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
+ *	Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
+ */
+UNUSUAL_DEV(  0x045e, 0xffff, 0x0000, 0x0000,
+		"Mitac",
+		"GPS",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
 /*
  * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
  * Reported by Pete Zaitcev <zaitcev@redhat.com>
@@ -377,6 +389,13 @@ UNUSUAL_DEV(  0x04b0, 0x0401, 0x0200, 0x0200,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
+/* Reported by Tobias Kunze Briseno <t-linux@fictive.com> */
+UNUSUAL_DEV(  0x04b0, 0x0403, 0x0200, 0x0200,
+		"NIKON",
+		"NIKON DSC D2H",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
 /* Reported by Milinevsky Dmitry <niam.niam@gmail.com> */
 UNUSUAL_DEV(  0x04b0, 0x0409, 0x0100, 0x0100,
 		"NIKON",
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 3f3ce13fef43..237301849075 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -362,7 +362,7 @@ endchoice
 
 config FB_ACORN
 	bool "Acorn VIDC support"
-	depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
+	depends on (FB = y) && ARM && ARCH_ACORN
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index a7a1c891bfa2..2ac52fd8cc11 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -343,14 +343,14 @@ static int clcdfb_register(struct clcd_fb *fb)
 {
 	int ret;
 
-	fb->clk = clk_get(&fb->dev->dev, "CLCDCLK");
+	fb->clk = clk_get(&fb->dev->dev, NULL);
 	if (IS_ERR(fb->clk)) {
 		ret = PTR_ERR(fb->clk);
 		goto out;
 	}
 
 	fb->fb.fix.mmio_start	= fb->dev->res.start;
-	fb->fb.fix.mmio_len	= SZ_4K;
+	fb->fb.fix.mmio_len	= 4096;
 
 	fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
 	if (!fb->regs) {
diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c
index 8718f7349d6b..a469a3d6edcb 100644
--- a/drivers/video/aty/radeon_accel.c
+++ b/drivers/video/aty/radeon_accel.c
@@ -5,61 +5,61 @@
  * --dte
  */
 
-#define FLUSH_CACHE_WORKAROUND	1
-
-void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries)
+static void radeon_fixup_offset(struct radeonfb_info *rinfo)
 {
-	int i;
+	u32 local_base;
+
+	/* *** Ugly workaround *** */
+	/*
+	 * On some platforms, the video memory is mapped at 0 in radeon chip space
+	 * (like PPCs) by the firmware. X will always move it up so that it's seen
+	 * by the chip to be at the same address as the PCI BAR.
+	 * That means that when switching back from X, there is a mismatch between
+	 * the offsets programmed into the engine. This means that potentially,
+	 * accel operations done before radeonfb has a chance to re-init the engine
+	 * will have incorrect offsets, and potentially trash system memory !
+	 *
+	 * The correct fix is for fbcon to never call any accel op before the engine
+	 * has properly been re-initialized (by a call to set_var), but this is a
+	 * complex fix. This workaround in the meantime, called before every accel
+	 * operation, makes sure the offsets are in sync.
+	 */
 
-	for (i=0; i<2000000; i++) {
-		rinfo->fifo_free = INREG(RBBM_STATUS) & 0x7f;
-		if (rinfo->fifo_free >= entries)
-			return;
-		udelay(10);
-	}
-	printk(KERN_ERR "radeonfb: FIFO Timeout !\n");
-	/* XXX Todo: attempt to reset the engine */
-}
+	radeon_fifo_wait (1);
+	local_base = INREG(MC_FB_LOCATION) << 16;
+	if (local_base == rinfo->fb_local_base)
+		return;
 
-static inline void radeon_fifo_wait(struct radeonfb_info *rinfo, int entries)
-{
-	if (entries <= rinfo->fifo_free)
-		rinfo->fifo_free -= entries;
-	else
-		radeon_fifo_update_and_wait(rinfo, entries);
-}
+	rinfo->fb_local_base = local_base;
 
-static inline void radeonfb_set_creg(struct radeonfb_info *rinfo, u32 reg,
-				     u32 *cache, u32 new_val)
-{
-	if (new_val == *cache)
-		return;
-	*cache = new_val;
-	radeon_fifo_wait(rinfo, 1);
-	OUTREG(reg, new_val);
+	radeon_fifo_wait (3);
+	OUTREG(DEFAULT_PITCH_OFFSET, (rinfo->pitch << 0x16) |
+				     (rinfo->fb_local_base >> 10));
+	OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
+	OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
 }
 
 static void radeonfb_prim_fillrect(struct radeonfb_info *rinfo, 
 				   const struct fb_fillrect *region)
 {
-	radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
-			  rinfo->dp_gui_mc_base | GMC_BRUSH_SOLID_COLOR | ROP3_P);
-	radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
-			  DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
-	radeonfb_set_creg(rinfo, DP_BRUSH_FRGD_CLR, &rinfo->dp_brush_fg_cache,
-			  region->color);
-
-	/* Ensure the dst cache is flushed and the engine idle before
-	 * issuing the operation.
-	 *
-	 * This works around engine lockups on some cards
-	 */
-#if FLUSH_CACHE_WORKAROUND
-	radeon_fifo_wait(rinfo, 2);
+	radeon_fifo_wait(4);  
+  
+	OUTREG(DP_GUI_MASTER_CNTL,  
+		rinfo->dp_gui_master_cntl  /* contains, like GMC_DST_32BPP */
+                | GMC_BRUSH_SOLID_COLOR
+                | ROP3_P);
+	if (radeon_get_dstbpp(rinfo->depth) != DST_8BPP)
+		OUTREG(DP_BRUSH_FRGD_CLR, rinfo->pseudo_palette[region->color]);
+	else
+		OUTREG(DP_BRUSH_FRGD_CLR, region->color);
+	OUTREG(DP_WRITE_MSK, 0xffffffff);
+	OUTREG(DP_CNTL, (DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM));
+
+	radeon_fifo_wait(2);
 	OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
 	OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
-	radeon_fifo_wait(rinfo, 2);
+
+	radeon_fifo_wait(2);  
 	OUTREG(DST_Y_X, (region->dy << 16) | region->dx);
 	OUTREG(DST_WIDTH_HEIGHT, (region->width << 16) | region->height);
 }
@@ -70,14 +70,15 @@ void radeonfb_fillrect(struct fb_info *info, const struct fb_fillrect *region)
 	struct fb_fillrect modded;
 	int vxres, vyres;
   
-	WARN_ON(rinfo->gfx_mode);
-	if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
+	if (info->state != FBINFO_STATE_RUNNING)
 		return;
 	if (info->flags & FBINFO_HWACCEL_DISABLED) {
 		cfb_fillrect(info, region);
 		return;
 	}
 
+	radeon_fixup_offset(rinfo);
+
 	vxres = info->var.xres_virtual;
 	vyres = info->var.yres_virtual;
 
@@ -90,10 +91,6 @@ void radeonfb_fillrect(struct fb_info *info, const struct fb_fillrect *region)
 	if(modded.dx + modded.width  > vxres) modded.width  = vxres - modded.dx;
 	if(modded.dy + modded.height > vyres) modded.height = vyres - modded.dy;
 
-	if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
-	    info->fix.visual == FB_VISUAL_DIRECTCOLOR )
-		modded.color = ((u32 *) (info->pseudo_palette))[region->color];
-
 	radeonfb_prim_fillrect(rinfo, &modded);
 }
 
@@ -112,22 +109,22 @@ static void radeonfb_prim_copyarea(struct radeonfb_info *rinfo,
 	if ( xdir < 0 ) { sx += w-1; dx += w-1; }
 	if ( ydir < 0 ) { sy += h-1; dy += h-1; }
 
-	radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
-			  rinfo->dp_gui_mc_base |
-			  GMC_BRUSH_NONE |
-			  GMC_SRC_DATATYPE_COLOR |
-			  ROP3_S |
-			  DP_SRC_SOURCE_MEMORY);
-	radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
-			  (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0) |
-			  (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
-
-#if FLUSH_CACHE_WORKAROUND
-	radeon_fifo_wait(rinfo, 2);
+	radeon_fifo_wait(3);
+	OUTREG(DP_GUI_MASTER_CNTL,
+		rinfo->dp_gui_master_cntl /* i.e. GMC_DST_32BPP */
+		| GMC_BRUSH_NONE
+		| GMC_SRC_DSTCOLOR
+		| ROP3_S 
+		| DP_SRC_SOURCE_MEMORY );
+	OUTREG(DP_WRITE_MSK, 0xffffffff);
+	OUTREG(DP_CNTL, (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0)
+			| (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
+
+	radeon_fifo_wait(2);
 	OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
 	OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
-	radeon_fifo_wait(rinfo, 3);
+
+	radeon_fifo_wait(3);
 	OUTREG(SRC_Y_X, (sy << 16) | sx);
 	OUTREG(DST_Y_X, (dy << 16) | dx);
 	OUTREG(DST_HEIGHT_WIDTH, (h << 16) | w);
@@ -146,14 +143,15 @@ void radeonfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 	modded.width  = area->width;
 	modded.height = area->height;
   
-	WARN_ON(rinfo->gfx_mode);
-	if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
+	if (info->state != FBINFO_STATE_RUNNING)
 		return;
 	if (info->flags & FBINFO_HWACCEL_DISABLED) {
 		cfb_copyarea(info, area);
 		return;
 	}
 
+	radeon_fixup_offset(rinfo);
+
 	vxres = info->var.xres_virtual;
 	vyres = info->var.yres_virtual;
 
@@ -170,112 +168,13 @@ void radeonfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 	radeonfb_prim_copyarea(rinfo, &modded);
 }
 
-static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo,
-				    const struct fb_image *image,
-				    u32 fg, u32 bg)
-{
-	unsigned int src_bytes, dwords;
-	u32 *bits;
-
-	radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
-			  rinfo->dp_gui_mc_base |
-			  GMC_BRUSH_NONE |
-			  GMC_SRC_DATATYPE_MONO_FG_BG |
-			  ROP3_S |
-			  GMC_BYTE_ORDER_MSB_TO_LSB |
-			  DP_SRC_SOURCE_HOST_DATA);
-	radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
-			  DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
-	radeonfb_set_creg(rinfo, DP_SRC_FRGD_CLR, &rinfo->dp_src_fg_cache, fg);
-	radeonfb_set_creg(rinfo, DP_SRC_BKGD_CLR, &rinfo->dp_src_bg_cache, bg);
-
-	radeon_fifo_wait(rinfo, 1);
-	OUTREG(DST_Y_X, (image->dy << 16) | image->dx);
-
-	/* Ensure the dst cache is flushed and the engine idle before
-	 * issuing the operation.
-	 *
-	 * This works around engine lockups on some cards
-	 */
-#if FLUSH_CACHE_WORKAROUND
-	radeon_fifo_wait(rinfo, 2);
-	OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
-	OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
-
-	/* X here pads width to a multiple of 32 and uses the clipper to
-	 * adjust the result. Is that really necessary ? Things seem to
-	 * work ok for me without that and the doco doesn't seem to imply
-	 * there is such a restriction.
-	 */
-	OUTREG(DST_WIDTH_HEIGHT, (image->width << 16) | image->height);
-
-	src_bytes = (((image->width * image->depth) + 7) / 8) * image->height;
-	dwords = (src_bytes + 3) / 4;
-	bits = (u32*)(image->data);
-
-	while(dwords >= 8) {
-		radeon_fifo_wait(rinfo, 8);
-#if BITS_PER_LONG == 64
-		__raw_writeq(*((u64 *)(bits)), rinfo->mmio_base + HOST_DATA0);
-		__raw_writeq(*((u64 *)(bits+2)), rinfo->mmio_base + HOST_DATA2);
-		__raw_writeq(*((u64 *)(bits+4)), rinfo->mmio_base + HOST_DATA4);
-		__raw_writeq(*((u64 *)(bits+6)), rinfo->mmio_base + HOST_DATA6);
-		bits += 8;
-#else
-		__raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0);
-		__raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA1);
-		__raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA2);
-		__raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA3);
-		__raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA4);
-		__raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA5);
-		__raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA6);
-		__raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA7);
-#endif
-		dwords -= 8;
-	}
-	while(dwords--) {
-		radeon_fifo_wait(rinfo, 1);
-		__raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0);
-	}
-}
-
 void radeonfb_imageblit(struct fb_info *info, const struct fb_image *image)
 {
 	struct radeonfb_info *rinfo = info->par;
-	u32 fg, bg;
-
-	WARN_ON(rinfo->gfx_mode);
-	if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
-		return;
 
-	if (!image->width || !image->height)
+	if (info->state != FBINFO_STATE_RUNNING)
 		return;
-
-	/* We only do 1 bpp color expansion for now */
-	if (info->flags & FBINFO_HWACCEL_DISABLED || image->depth != 1)
-		goto fallback;
-
-	/* Fallback if running out of the screen. We may do clipping
-	 * in the future */
-	if ((image->dx + image->width) > info->var.xres_virtual ||
-	    (image->dy + image->height) > info->var.yres_virtual)
-		goto fallback;
-
-	if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
-	    info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
-		fg = ((u32*)(info->pseudo_palette))[image->fg_color];
-		bg = ((u32*)(info->pseudo_palette))[image->bg_color];
-	} else {
-		fg = image->fg_color;
-		bg = image->bg_color;
-	}
-
-	radeonfb_prim_imageblit(rinfo, image, fg, bg);
-	return;
-
- fallback:
-	radeon_engine_idle(rinfo);
+	radeon_engine_idle();
 
 	cfb_imageblit(info, image);
 }
@@ -286,8 +185,7 @@ int radeonfb_sync(struct fb_info *info)
 
 	if (info->state != FBINFO_STATE_RUNNING)
 		return 0;
-
-	radeon_engine_idle(rinfo);
+	radeon_engine_idle();
 
 	return 0;
 }
@@ -363,10 +261,9 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo)
 	/* disable 3D engine */
 	OUTREG(RB3D_CNTL, 0);
 
-	rinfo->fifo_free = 0;
 	radeonfb_engine_reset(rinfo);
 
-	radeon_fifo_wait(rinfo, 1);
+	radeon_fifo_wait (1);
 	if (IS_R300_VARIANT(rinfo)) {
 		OUTREG(RB2D_DSTCACHE_MODE, INREG(RB2D_DSTCACHE_MODE) |
 		       RB2D_DC_AUTOFLUSH_ENABLE |
@@ -380,7 +277,7 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo)
 		OUTREG(RB2D_DSTCACHE_MODE, 0);
 	}
 
-	radeon_fifo_wait(rinfo, 3);
+	radeon_fifo_wait (3);
 	/* We re-read MC_FB_LOCATION from card as it can have been
 	 * modified by XFree drivers (ouch !)
 	 */
@@ -391,57 +288,41 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo)
 	OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
 	OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
 
-	radeon_fifo_wait(rinfo, 1);
-#ifdef __BIG_ENDIAN
+	radeon_fifo_wait (1);
+#if defined(__BIG_ENDIAN)
 	OUTREGP(DP_DATATYPE, HOST_BIG_ENDIAN_EN, ~HOST_BIG_ENDIAN_EN);
 #else
 	OUTREGP(DP_DATATYPE, 0, ~HOST_BIG_ENDIAN_EN);
 #endif
-	radeon_fifo_wait(rinfo, 2);
+	radeon_fifo_wait (2);
 	OUTREG(DEFAULT_SC_TOP_LEFT, 0);
 	OUTREG(DEFAULT_SC_BOTTOM_RIGHT, (DEFAULT_SC_RIGHT_MAX |
 					 DEFAULT_SC_BOTTOM_MAX));
 
-	/* set default DP_GUI_MASTER_CNTL */
 	temp = radeon_get_dstbpp(rinfo->depth);
-	rinfo->dp_gui_mc_base = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS);
+	rinfo->dp_gui_master_cntl = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS);
 
-	rinfo->dp_gui_mc_cache = rinfo->dp_gui_mc_base |
-		GMC_BRUSH_SOLID_COLOR |
-		GMC_SRC_DATATYPE_COLOR;
-	radeon_fifo_wait(rinfo, 1);
-	OUTREG(DP_GUI_MASTER_CNTL, rinfo->dp_gui_mc_cache);
+	radeon_fifo_wait (1);
+	OUTREG(DP_GUI_MASTER_CNTL, (rinfo->dp_gui_master_cntl |
+				    GMC_BRUSH_SOLID_COLOR |
+				    GMC_SRC_DATATYPE_COLOR));
 
+	radeon_fifo_wait (7);
 
 	/* clear line drawing regs */
-	radeon_fifo_wait(rinfo, 2);
 	OUTREG(DST_LINE_START, 0);
 	OUTREG(DST_LINE_END, 0);
 
-	/* set brush and source color regs */
-	rinfo->dp_brush_fg_cache = 0xffffffff;
-	rinfo->dp_brush_bg_cache = 0x00000000;
-	rinfo->dp_src_fg_cache = 0xffffffff;
-	rinfo->dp_src_bg_cache = 0x00000000;
-	radeon_fifo_wait(rinfo, 4);
-	OUTREG(DP_BRUSH_FRGD_CLR, rinfo->dp_brush_fg_cache);
-	OUTREG(DP_BRUSH_BKGD_CLR, rinfo->dp_brush_bg_cache);
-	OUTREG(DP_SRC_FRGD_CLR, rinfo->dp_src_fg_cache);
-	OUTREG(DP_SRC_BKGD_CLR, rinfo->dp_src_bg_cache);
-
-	/* Default direction */
-	rinfo->dp_cntl_cache = DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM;
-	radeon_fifo_wait(rinfo, 1);
-	OUTREG(DP_CNTL, rinfo->dp_cntl_cache);
+	/* set brush color regs */
+	OUTREG(DP_BRUSH_FRGD_CLR, 0xffffffff);
+	OUTREG(DP_BRUSH_BKGD_CLR, 0x00000000);
+
+	/* set source color regs */
+	OUTREG(DP_SRC_FRGD_CLR, 0xffffffff);
+	OUTREG(DP_SRC_BKGD_CLR, 0x00000000);
 
 	/* default write mask */
-	radeon_fifo_wait(rinfo, 1);
 	OUTREG(DP_WRITE_MSK, 0xffffffff);
 
-	/* Default to no swapping of host data */
-	radeon_fifo_wait(rinfo, 1);
-	OUTREG(RBBM_GUICNTL, RBBM_GUICNTL_HOST_DATA_SWAP_NONE);
-
-	/* Make sure it's settled */
-	radeon_engine_idle(rinfo);
+	radeon_engine_idle ();
 }
diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c
index f343ba83f0ae..1a056adb61c8 100644
--- a/drivers/video/aty/radeon_backlight.c
+++ b/drivers/video/aty/radeon_backlight.c
@@ -66,7 +66,7 @@ static int radeon_bl_update_status(struct backlight_device *bd)
 		level = bd->props.brightness;
 
 	del_timer_sync(&rinfo->lvds_timer);
-	radeon_engine_idle(rinfo);
+	radeon_engine_idle();
 
 	lvds_gen_cntl = INREG(LVDS_GEN_CNTL);
 	if (level > 0) {
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 9a5821c65ebf..d0f1a7fc2c9d 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -852,6 +852,7 @@ static int radeonfb_pan_display (struct fb_var_screeninfo *var,
         if (rinfo->asleep)
         	return 0;
 
+	radeon_fifo_wait(2);
         OUTREG(CRTC_OFFSET, ((var->yoffset * var->xres_virtual + var->xoffset)
 			     * var->bits_per_pixel / 8) & ~7);
         return 0;
@@ -881,6 +882,7 @@ static int radeonfb_ioctl (struct fb_info *info, unsigned int cmd,
 			if (rc)
 				return rc;
 
+			radeon_fifo_wait(2);
 			if (value & 0x01) {
 				tmp = INREG(LVDS_GEN_CNTL);
 
@@ -938,7 +940,7 @@ int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch)
 	if (rinfo->lock_blank)
 		return 0;
 
-	radeon_engine_idle(rinfo);
+	radeon_engine_idle();
 
 	val = INREG(CRTC_EXT_CNTL);
         val &= ~(CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS |
@@ -1046,7 +1048,7 @@ static int radeonfb_blank (int blank, struct fb_info *info)
 
 	if (rinfo->asleep)
 		return 0;
-
+		
 	return radeon_screen_blank(rinfo, blank, 0);
 }
 
@@ -1072,6 +1074,8 @@ static int radeon_setcolreg (unsigned regno, unsigned red, unsigned green,
         pindex = regno;
 
         if (!rinfo->asleep) {
+		radeon_fifo_wait(9);
+
 		if (rinfo->bpp == 16) {
 			pindex = regno * 8;
 
@@ -1240,6 +1244,8 @@ static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_reg
 {
 	int i;
 
+	radeon_fifo_wait(20);
+
 	/* Workaround from XFree */
 	if (rinfo->is_mobility) {
 	        /* A temporal workaround for the occational blanking on certain laptop
@@ -1335,7 +1341,7 @@ static void radeon_lvds_timer_func(unsigned long data)
 {
 	struct radeonfb_info *rinfo = (struct radeonfb_info *)data;
 
-	radeon_engine_idle(rinfo);
+	radeon_engine_idle();
 
 	OUTREG(LVDS_GEN_CNTL, rinfo->pending_lvds_gen_cntl);
 }
@@ -1353,11 +1359,10 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode,
 	if (nomodeset)
 		return;
 
-	radeon_engine_idle(rinfo);
-
 	if (!regs_only)
 		radeon_screen_blank(rinfo, FB_BLANK_NORMAL, 0);
 
+	radeon_fifo_wait(31);
 	for (i=0; i<10; i++)
 		OUTREG(common_regs[i].reg, common_regs[i].val);
 
@@ -1385,6 +1390,7 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode,
 	radeon_write_pll_regs(rinfo, mode);
 
 	if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) {
+		radeon_fifo_wait(10);
 		OUTREG(FP_CRTC_H_TOTAL_DISP, mode->fp_crtc_h_total_disp);
 		OUTREG(FP_CRTC_V_TOTAL_DISP, mode->fp_crtc_v_total_disp);
 		OUTREG(FP_H_SYNC_STRT_WID, mode->fp_h_sync_strt_wid);
@@ -1399,6 +1405,7 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode,
 	if (!regs_only)
 		radeon_screen_blank(rinfo, FB_BLANK_UNBLANK, 0);
 
+	radeon_fifo_wait(2);
 	OUTPLL(VCLK_ECP_CNTL, mode->vclk_ecp_cntl);
 	
 	return;
@@ -1549,7 +1556,7 @@ static int radeonfb_set_par(struct fb_info *info)
 	/* We always want engine to be idle on a mode switch, even
 	 * if we won't actually change the mode
 	 */
-	radeon_engine_idle(rinfo);
+	radeon_engine_idle();
 
 	hSyncStart = mode->xres + mode->right_margin;
 	hSyncEnd = hSyncStart + mode->hsync_len;
@@ -1844,6 +1851,7 @@ static int radeonfb_set_par(struct fb_info *info)
 	return 0;
 }
 
+
 static struct fb_ops radeonfb_ops = {
 	.owner			= THIS_MODULE,
 	.fb_check_var		= radeonfb_check_var,
@@ -1867,7 +1875,6 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo)
 	info->par = rinfo;
 	info->pseudo_palette = rinfo->pseudo_palette;
 	info->flags = FBINFO_DEFAULT
-		    | FBINFO_HWACCEL_IMAGEBLIT
 		    | FBINFO_HWACCEL_COPYAREA
 		    | FBINFO_HWACCEL_FILLRECT
 		    | FBINFO_HWACCEL_XPAN
@@ -1999,6 +2006,7 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo)
           u32 tom = INREG(NB_TOM);
           tmp = ((((tom >> 16) - (tom & 0xffff) + 1) << 6) * 1024);
 
+ 		radeon_fifo_wait(6);
           OUTREG(MC_FB_LOCATION, tom);
           OUTREG(DISPLAY_BASE_ADDR, (tom & 0xffff) << 16);
           OUTREG(CRTC2_DISPLAY_BASE_ADDR, (tom & 0xffff) << 16);
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 3df5015f1d13..675abdafc2d8 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2653,9 +2653,9 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
 
 	if (!(info->flags & FBINFO_HWACCEL_DISABLED)) {
 		/* Make sure engine is reset */
-		radeon_engine_idle(rinfo);
+		radeon_engine_idle();
 		radeonfb_engine_reset(rinfo);
-		radeon_engine_idle(rinfo);
+		radeon_engine_idle();
 	}
 
 	/* Blank display and LCD */
@@ -2767,7 +2767,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
 
 		rinfo->asleep = 0;
 	} else
-		radeon_engine_idle(rinfo);
+		radeon_engine_idle();
 
 	/* Restore display & engine */
 	radeon_write_mode (rinfo, &rinfo->state, 1);
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h
index ea0b5b47acaf..3ea1b00fdd22 100644
--- a/drivers/video/aty/radeonfb.h
+++ b/drivers/video/aty/radeonfb.h
@@ -336,15 +336,7 @@ struct radeonfb_info {
 	int			mon2_type;
 	u8		        *mon2_EDID;
 
-	/* accel bits */
-	u32			dp_gui_mc_base;
-	u32			dp_gui_mc_cache;
-	u32			dp_cntl_cache;
-	u32			dp_brush_fg_cache;
-	u32			dp_brush_bg_cache;
-	u32			dp_src_fg_cache;
-	u32			dp_src_bg_cache;
-	u32			fifo_free;
+	u32			dp_gui_master_cntl;
 
 	struct pll_info		pll;
 
@@ -356,7 +348,6 @@ struct radeonfb_info {
 	int			lock_blank;
 	int			dynclk;
 	int			no_schedule;
-	int 			gfx_mode;
 	enum radeon_pm_mode	pm_mode;
 	reinit_function_ptr     reinit_func;
 
@@ -401,14 +392,8 @@ static inline void _radeon_msleep(struct radeonfb_info *rinfo, unsigned long ms)
 #define OUTREG8(addr,val)	writeb(val, (rinfo->mmio_base)+addr)
 #define INREG16(addr)		readw((rinfo->mmio_base)+addr)
 #define OUTREG16(addr,val)	writew(val, (rinfo->mmio_base)+addr)
-
-#ifdef CONFIG_PPC
-#define INREG(addr)	     	({ eieio(); ld_le32(rinfo->mmio_base+(addr)); })
-#define OUTREG(addr,val)	do { eieio(); st_le32(rinfo->mmio_base+(addr),(val)); } while(0)
-#else
 #define INREG(addr)		readl((rinfo->mmio_base)+addr)
 #define OUTREG(addr,val)	writel(val, (rinfo->mmio_base)+addr)
-#endif
 
 static inline void _OUTREGP(struct radeonfb_info *rinfo, u32 addr,
 		       u32 val, u32 mask)
@@ -550,7 +535,17 @@ static inline u32 radeon_get_dstbpp(u16 depth)
  * 2D Engine helper routines
  */
 
-extern void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries);
+static inline void _radeon_fifo_wait(struct radeonfb_info *rinfo, int entries)
+{
+	int i;
+
+	for (i=0; i<2000000; i++) {
+		if ((INREG(RBBM_STATUS) & 0x7f) >= entries)
+			return;
+		udelay(1);
+	}
+	printk(KERN_ERR "radeonfb: FIFO Timeout !\n");
+}
 
 static inline void radeon_engine_flush (struct radeonfb_info *rinfo)
 {
@@ -563,7 +558,7 @@ static inline void radeon_engine_flush (struct radeonfb_info *rinfo)
 	/* Ensure FIFO is empty, ie, make sure the flush commands
 	 * has reached the cache
 	 */
-	radeon_fifo_update_and_wait(rinfo, 64);
+	_radeon_fifo_wait (rinfo, 64);
 
 	/* Wait for the flush to complete */
 	for (i=0; i < 2000000; i++) {
@@ -575,12 +570,12 @@ static inline void radeon_engine_flush (struct radeonfb_info *rinfo)
 }
 
 
-static inline void radeon_engine_idle(struct radeonfb_info *rinfo)
+static inline void _radeon_engine_idle(struct radeonfb_info *rinfo)
 {
 	int i;
 
 	/* ensure FIFO is empty before waiting for idle */
-	radeon_fifo_update_and_wait (rinfo, 64);
+	_radeon_fifo_wait (rinfo, 64);
 
 	for (i=0; i<2000000; i++) {
 		if (((INREG(RBBM_STATUS) & GUI_ACTIVE)) == 0) {
@@ -593,6 +588,8 @@ static inline void radeon_engine_idle(struct radeonfb_info *rinfo)
 }
 
 
+#define radeon_engine_idle()		_radeon_engine_idle(rinfo)
+#define radeon_fifo_wait(entries)	_radeon_fifo_wait(rinfo,entries)
 #define radeon_msleep(ms)		_radeon_msleep(rinfo,ms)
 
 
@@ -622,7 +619,6 @@ extern void radeonfb_imageblit(struct fb_info *p, const struct fb_image *image);
 extern int radeonfb_sync(struct fb_info *info);
 extern void radeonfb_engine_init (struct radeonfb_info *rinfo);
 extern void radeonfb_engine_reset(struct radeonfb_info *rinfo);
-extern void radeon_fixup_mem_offset(struct radeonfb_info *rinfo);
 
 /* Other functions */
 extern int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch);
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index b92947d62ad6..0b2adefe9e3d 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -2389,16 +2389,13 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch)
 
  	if (!fbcon_is_inactive(vc, info)) {
 		if (ops->blank_state != blank) {
-			int ret = 1;
-
 			ops->blank_state = blank;
 			fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW);
 			ops->cursor_flash = (!blank);
 
-			if (info->fbops->fb_blank)
-				ret = info->fbops->fb_blank(blank, info);
-			if (ret)
-				fbcon_generic_blank(vc, info, blank);
+			if (!(info->flags & FBINFO_MISC_USEREVENT))
+				if (fb_blank(info, blank))
+					fbcon_generic_blank(vc, info, blank);
 		}
 
 		if (!blank)
@@ -3534,12 +3531,18 @@ static void fbcon_exit(void)
 	softback_buf = 0UL;
 
 	for (i = 0; i < FB_MAX; i++) {
+		int pending;
+
 		mapped = 0;
 		info = registered_fb[i];
 
 		if (info == NULL)
 			continue;
 
+		pending = cancel_work_sync(&info->queue);
+		DPRINTK("fbcon: %s pending work\n", (pending ? "canceled" :
+			"no"));
+
 		for (j = first_fb_vc; j <= last_fb_vc; j++) {
 			if (con2fb_map[j] == i)
 				mapped = 1;
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index ccd986140c95..d58c68cd456e 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -1,6 +1,4 @@
 /*
- *  linux/drivers/video/imxfb.c
- *
  *  Freescale i.MX Frame Buffer device driver
  *
  *  Copyright (C) 2004 Sascha Hauer, Pengutronix
@@ -16,7 +14,6 @@
  *	linux-arm-kernel@lists.arm.linux.org.uk
  */
 
-//#define DEBUG 1
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -32,9 +29,8 @@
 #include <linux/cpufreq.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/io.h>
 
-#include <mach/hardware.h>
-#include <asm/io.h>
 #include <mach/imxfb.h>
 
 /*
@@ -42,23 +38,150 @@
  */
 #define DEBUG_VAR 1
 
-#include "imxfb.h"
+#define DRIVER_NAME "imx-fb"
+
+#define LCDC_SSA	0x00
+
+#define LCDC_SIZE	0x04
+#define SIZE_XMAX(x)	((((x) >> 4) & 0x3f) << 20)
+#define SIZE_YMAX(y)	((y) & 0x1ff)
+
+#define LCDC_VPW	0x08
+#define VPW_VPW(x)	((x) & 0x3ff)
+
+#define LCDC_CPOS	0x0C
+#define CPOS_CC1	(1<<31)
+#define CPOS_CC0	(1<<30)
+#define CPOS_OP		(1<<28)
+#define CPOS_CXP(x)	(((x) & 3ff) << 16)
+#define CPOS_CYP(y)	((y) & 0x1ff)
+
+#define LCDC_LCWHB	0x10
+#define LCWHB_BK_EN	(1<<31)
+#define LCWHB_CW(w)	(((w) & 0x1f) << 24)
+#define LCWHB_CH(h)	(((h) & 0x1f) << 16)
+#define LCWHB_BD(x)	((x) & 0xff)
+
+#define LCDC_LCHCC	0x14
+#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
+#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
+#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
+
+#define LCDC_PCR	0x18
+
+#define LCDC_HCR	0x1C
+#define HCR_H_WIDTH(x)	(((x) & 0x3f) << 26)
+#define HCR_H_WAIT_1(x)	(((x) & 0xff) << 8)
+#define HCR_H_WAIT_2(x)	((x) & 0xff)
+
+#define LCDC_VCR	0x20
+#define VCR_V_WIDTH(x)	(((x) & 0x3f) << 26)
+#define VCR_V_WAIT_1(x)	(((x) & 0xff) << 8)
+#define VCR_V_WAIT_2(x)	((x) & 0xff)
+
+#define LCDC_POS	0x24
+#define POS_POS(x)	((x) & 1f)
+
+#define LCDC_LSCR1	0x28
+/* bit fields in imxfb.h */
+
+#define LCDC_PWMR	0x2C
+/* bit fields in imxfb.h */
+
+#define LCDC_DMACR	0x30
+/* bit fields in imxfb.h */
+
+#define LCDC_RMCR	0x34
+#define RMCR_LCDC_EN	(1<<1)
+#define RMCR_SELF_REF	(1<<0)
+
+#define LCDC_LCDICR	0x38
+#define LCDICR_INT_SYN	(1<<2)
+#define LCDICR_INT_CON	(1)
+
+#define LCDC_LCDISR	0x40
+#define LCDISR_UDR_ERR	(1<<3)
+#define LCDISR_ERR_RES	(1<<2)
+#define LCDISR_EOF	(1<<1)
+#define LCDISR_BOF	(1<<0)
+
+/*
+ * These are the bitfields for each
+ * display depth that we support.
+ */
+struct imxfb_rgb {
+	struct fb_bitfield	red;
+	struct fb_bitfield	green;
+	struct fb_bitfield	blue;
+	struct fb_bitfield	transp;
+};
+
+struct imxfb_info {
+	struct platform_device  *pdev;
+	void __iomem		*regs;
 
-static struct imxfb_rgb def_rgb_16 = {
-	.red	= { .offset = 8,  .length = 4, },
-	.green	= { .offset = 4,  .length = 4, },
-	.blue	= { .offset = 0,  .length = 4, },
-	.transp = { .offset = 0,  .length = 0, },
+	u_int			max_bpp;
+	u_int			max_xres;
+	u_int			max_yres;
+
+	/*
+	 * These are the addresses we mapped
+	 * the framebuffer memory region to.
+	 */
+	dma_addr_t		map_dma;
+	u_char			*map_cpu;
+	u_int			map_size;
+
+	u_char			*screen_cpu;
+	dma_addr_t		screen_dma;
+	u_int			palette_size;
+
+	dma_addr_t		dbar1;
+	dma_addr_t		dbar2;
+
+	u_int			pcr;
+	u_int			pwmr;
+	u_int			lscr1;
+	u_int			dmacr;
+	u_int			cmap_inverse:1,
+				cmap_static:1,
+				unused:30;
+
+	void (*lcd_power)(int);
+	void (*backlight_power)(int);
+};
+
+#define IMX_NAME	"IMX"
+
+/*
+ * Minimum X and Y resolutions
+ */
+#define MIN_XRES	64
+#define MIN_YRES	64
+
+static struct imxfb_rgb def_rgb_16_tft = {
+	.red	= {.offset = 11, .length = 5,},
+	.green	= {.offset = 5, .length = 6,},
+	.blue	= {.offset = 0, .length = 5,},
+	.transp = {.offset = 0, .length = 0,},
+};
+
+static struct imxfb_rgb def_rgb_16_stn = {
+	.red	= {.offset = 8, .length = 4,},
+	.green	= {.offset = 4, .length = 4,},
+	.blue	= {.offset = 0, .length = 4,},
+	.transp = {.offset = 0, .length = 0,},
 };
 
 static struct imxfb_rgb def_rgb_8 = {
-	.red	= { .offset = 0,  .length = 8, },
-	.green	= { .offset = 0,  .length = 8, },
-	.blue	= { .offset = 0,  .length = 8, },
-	.transp = { .offset = 0,  .length = 0, },
+	.red	= {.offset = 0, .length = 8,},
+	.green	= {.offset = 0, .length = 8,},
+	.blue	= {.offset = 0, .length = 8,},
+	.transp = {.offset = 0, .length = 0,},
 };
 
-static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info);
+static int imxfb_activate_var(struct fb_var_screeninfo *var,
+		struct fb_info *info);
 
 static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
 {
@@ -67,10 +190,8 @@ static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
 	return chan << bf->offset;
 }
 
-#define LCDC_PALETTE(x) __REG2(IMX_LCDC_BASE+0x800, (x)<<2)
-static int
-imxfb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
-		       u_int trans, struct fb_info *info)
+static int imxfb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
+		u_int trans, struct fb_info *info)
 {
 	struct imxfb_info *fbi = info->par;
 	u_int val, ret = 1;
@@ -81,14 +202,13 @@ imxfb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
 		      (CNVT_TOHW(green,4) << 4) |
 		      CNVT_TOHW(blue,  4);
 
-		LCDC_PALETTE(regno) = val;
+		writel(val, fbi->regs + 0x800 + (regno << 2));
 		ret = 0;
 	}
 	return ret;
 }
 
-static int
-imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+static int imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 		   u_int trans, struct fb_info *info)
 {
 	struct imxfb_info *fbi = info->par;
@@ -148,11 +268,10 @@ imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
  *    yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
  *    bitfields, horizontal timing, vertical timing.
  */
-static int
-imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
 	struct imxfb_info *fbi = info->par;
-	int rgbidx;
+	struct imxfb_rgb *rgb;
 
 	if (var->xres < MIN_XRES)
 		var->xres = MIN_XRES;
@@ -168,23 +287,25 @@ imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel);
 	switch (var->bits_per_pixel) {
 	case 16:
-		rgbidx = RGB_16;
+	default:
+		if (readl(fbi->regs + LCDC_PCR) & PCR_TFT)
+			rgb = &def_rgb_16_tft;
+		else
+			rgb = &def_rgb_16_stn;
 		break;
 	case 8:
-		rgbidx = RGB_8;
+		rgb = &def_rgb_8;
 		break;
-	default:
-		rgbidx = RGB_16;
 	}
 
 	/*
 	 * Copy the RGB parameters for this display
 	 * from the machine specific parameters.
 	 */
-	var->red    = fbi->rgb[rgbidx]->red;
-	var->green  = fbi->rgb[rgbidx]->green;
-	var->blue   = fbi->rgb[rgbidx]->blue;
-	var->transp = fbi->rgb[rgbidx]->transp;
+	var->red    = rgb->red;
+	var->green  = rgb->green;
+	var->blue   = rgb->blue;
+	var->transp = rgb->transp;
 
 	pr_debug("RGBT length = %d:%d:%d:%d\n",
 		var->red.length, var->green.length, var->blue.length,
@@ -221,8 +342,7 @@ static int imxfb_set_par(struct fb_info *info)
 		info->fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
 	}
 
-	info->fix.line_length = var->xres_virtual *
-				  var->bits_per_pixel / 8;
+	info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
 	fbi->palette_size = var->bits_per_pixel == 8 ? 256 : 16;
 
 	imxfb_activate_var(var, info);
@@ -235,22 +355,27 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
 	pr_debug("Enabling LCD controller\n");
 
 	/* initialize LCDC */
-	LCDC_RMCR &= ~RMCR_LCDC_EN;		/* just to be safe... */
+	writel(readl(fbi->regs + LCDC_RMCR) & ~RMCR_LCDC_EN,
+		fbi->regs + LCDC_RMCR);	/* just to be safe... */
+
+	writel(fbi->screen_dma, fbi->regs + LCDC_SSA);
 
-	LCDC_SSA	= fbi->screen_dma;
 	/* physical screen start address	    */
-	LCDC_VPW	= VPW_VPW(fbi->max_xres * fbi->max_bpp / 8 / 4);
+	writel(VPW_VPW(fbi->max_xres * fbi->max_bpp / 8 / 4),
+		fbi->regs + LCDC_VPW);
 
-	LCDC_POS	= 0x00000000;   /* panning offset 0 (0 pixel offset)        */
+	/* panning offset 0 (0 pixel offset)        */
+	writel(0x00000000, fbi->regs + LCDC_POS);
 
 	/* disable hardware cursor */
-	LCDC_CPOS	&= ~(CPOS_CC0 | CPOS_CC1);
+	writel(readl(fbi->regs + LCDC_CPOS) & ~(CPOS_CC0 | CPOS_CC1),
+		fbi->regs + LCDC_CPOS);
 
-	LCDC_RMCR = RMCR_LCDC_EN;
+	writel(RMCR_LCDC_EN, fbi->regs + LCDC_RMCR);
 
-	if(fbi->backlight_power)
+	if (fbi->backlight_power)
 		fbi->backlight_power(1);
-	if(fbi->lcd_power)
+	if (fbi->lcd_power)
 		fbi->lcd_power(1);
 }
 
@@ -258,12 +383,12 @@ static void imxfb_disable_controller(struct imxfb_info *fbi)
 {
 	pr_debug("Disabling LCD controller\n");
 
-	if(fbi->backlight_power)
+	if (fbi->backlight_power)
 		fbi->backlight_power(0);
-	if(fbi->lcd_power)
+	if (fbi->lcd_power)
 		fbi->lcd_power(0);
 
-	LCDC_RMCR = 0;
+	writel(0, fbi->regs + LCDC_RMCR);
 }
 
 static int imxfb_blank(int blank, struct fb_info *info)
@@ -340,74 +465,26 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 			info->fix.id, var->lower_margin);
 #endif
 
-	LCDC_HCR	= HCR_H_WIDTH(var->hsync_len) |
-	                  HCR_H_WAIT_1(var->left_margin) |
-			  HCR_H_WAIT_2(var->right_margin);
+	writel(HCR_H_WIDTH(var->hsync_len) |
+		HCR_H_WAIT_1(var->right_margin) |
+		HCR_H_WAIT_2(var->left_margin),
+		fbi->regs + LCDC_HCR);
 
-	LCDC_VCR	= VCR_V_WIDTH(var->vsync_len) |
-	                  VCR_V_WAIT_1(var->upper_margin) |
-			  VCR_V_WAIT_2(var->lower_margin);
+	writel(VCR_V_WIDTH(var->vsync_len) |
+		VCR_V_WAIT_1(var->lower_margin) |
+		VCR_V_WAIT_2(var->upper_margin),
+		fbi->regs + LCDC_VCR);
 
-	LCDC_SIZE	= SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres);
-	LCDC_PCR	= fbi->pcr;
-	LCDC_PWMR	= fbi->pwmr;
-	LCDC_LSCR1	= fbi->lscr1;
-	LCDC_DMACR	= fbi->dmacr;
+	writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres),
+			fbi->regs + LCDC_SIZE);
+	writel(fbi->pcr, fbi->regs + LCDC_PCR);
+	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
+	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
+	writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
 
 	return 0;
 }
 
-static void imxfb_setup_gpio(struct imxfb_info *fbi)
-{
-	int width;
-
-	LCDC_RMCR	&= ~(RMCR_LCDC_EN | RMCR_SELF_REF);
-
-	if( fbi->pcr & PCR_TFT )
-		width = 16;
-	else
-		width = 1 << ((fbi->pcr >> 28) & 0x3);
-
-	switch(width) {
-	case 16:
-		imx_gpio_mode(PD30_PF_LD15);
-		imx_gpio_mode(PD29_PF_LD14);
-		imx_gpio_mode(PD28_PF_LD13);
-		imx_gpio_mode(PD27_PF_LD12);
-		imx_gpio_mode(PD26_PF_LD11);
-		imx_gpio_mode(PD25_PF_LD10);
-		imx_gpio_mode(PD24_PF_LD9);
-		imx_gpio_mode(PD23_PF_LD8);
-	case 8:
-		imx_gpio_mode(PD22_PF_LD7);
-		imx_gpio_mode(PD21_PF_LD6);
-		imx_gpio_mode(PD20_PF_LD5);
-		imx_gpio_mode(PD19_PF_LD4);
-	case 4:
-		imx_gpio_mode(PD18_PF_LD3);
-		imx_gpio_mode(PD17_PF_LD2);
-	case 2:
-		imx_gpio_mode(PD16_PF_LD1);
-	case 1:
-		imx_gpio_mode(PD15_PF_LD0);
-	}
-
-	/* initialize GPIOs */
-	imx_gpio_mode(PD6_PF_LSCLK);
-	imx_gpio_mode(PD11_PF_CONTRAST);
-	imx_gpio_mode(PD14_PF_FLM_VSYNC);
-	imx_gpio_mode(PD13_PF_LP_HSYNC);
-	imx_gpio_mode(PD12_PF_ACD_OE);
-
-	/* These are only needed for Sharp HR TFT displays */
-	if (fbi->pcr & PCR_SHARP) {
-		imx_gpio_mode(PD7_PF_REV);
-		imx_gpio_mode(PD8_PF_CLS);
-		imx_gpio_mode(PD9_PF_PS);
-		imx_gpio_mode(PD10_PF_SPL_SPR);
-	}
-}
-
 #ifdef CONFIG_PM
 /*
  * Power management hooks.  Note that we won't be called from IRQ context,
@@ -416,7 +493,8 @@ static void imxfb_setup_gpio(struct imxfb_info *fbi)
 static int imxfb_suspend(struct platform_device *dev, pm_message_t state)
 {
 	struct imxfb_info *fbi = platform_get_drvdata(dev);
-	pr_debug("%s\n",__func__);
+
+	pr_debug("%s\n", __func__);
 
 	imxfb_disable_controller(fbi);
 	return 0;
@@ -425,7 +503,8 @@ static int imxfb_suspend(struct platform_device *dev, pm_message_t state)
 static int imxfb_resume(struct platform_device *dev)
 {
 	struct imxfb_info *fbi = platform_get_drvdata(dev);
-	pr_debug("%s\n",__func__);
+
+	pr_debug("%s\n", __func__);
 
 	imxfb_enable_controller(fbi);
 	return 0;
@@ -435,149 +514,136 @@ static int imxfb_resume(struct platform_device *dev)
 #define imxfb_resume	NULL
 #endif
 
-static int __init imxfb_init_fbinfo(struct device *dev)
+static int __init imxfb_init_fbinfo(struct platform_device *pdev)
 {
-	struct imxfb_mach_info *inf = dev->platform_data;
-	struct fb_info *info = dev_get_drvdata(dev);
+	struct imx_fb_platform_data *pdata = pdev->dev.platform_data;
+	struct fb_info *info = dev_get_drvdata(&pdev->dev);
 	struct imxfb_info *fbi = info->par;
 
 	pr_debug("%s\n",__func__);
 
-	info->pseudo_palette = kmalloc( sizeof(u32) * 16, GFP_KERNEL);
+	info->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
 	if (!info->pseudo_palette)
 		return -ENOMEM;
 
 	memset(fbi, 0, sizeof(struct imxfb_info));
-	fbi->dev = dev;
 
 	strlcpy(info->fix.id, IMX_NAME, sizeof(info->fix.id));
 
-	info->fix.type	= FB_TYPE_PACKED_PIXELS;
+	info->fix.type			= FB_TYPE_PACKED_PIXELS;
 	info->fix.type_aux		= 0;
 	info->fix.xpanstep		= 0;
 	info->fix.ypanstep		= 0;
 	info->fix.ywrapstep		= 0;
-	info->fix.accel	= FB_ACCEL_NONE;
+	info->fix.accel			= FB_ACCEL_NONE;
 
 	info->var.nonstd		= 0;
 	info->var.activate		= FB_ACTIVATE_NOW;
 	info->var.height		= -1;
 	info->var.width	= -1;
 	info->var.accel_flags		= 0;
-	info->var.vmode	= FB_VMODE_NONINTERLACED;
+	info->var.vmode			= FB_VMODE_NONINTERLACED;
 
 	info->fbops			= &imxfb_ops;
-	info->flags			= FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST;
-
-	fbi->rgb[RGB_16]		= &def_rgb_16;
-	fbi->rgb[RGB_8]			= &def_rgb_8;
-
-	fbi->max_xres			= inf->xres;
-	info->var.xres			= inf->xres;
-	info->var.xres_virtual		= inf->xres;
-	fbi->max_yres			= inf->yres;
-	info->var.yres			= inf->yres;
-	info->var.yres_virtual		= inf->yres;
-	fbi->max_bpp			= inf->bpp;
-	info->var.bits_per_pixel	= inf->bpp;
-	info->var.nonstd		= inf->nonstd;
-	info->var.pixclock		= inf->pixclock;
-	info->var.hsync_len		= inf->hsync_len;
-	info->var.left_margin		= inf->left_margin;
-	info->var.right_margin		= inf->right_margin;
-	info->var.vsync_len		= inf->vsync_len;
-	info->var.upper_margin		= inf->upper_margin;
-	info->var.lower_margin		= inf->lower_margin;
-	info->var.sync			= inf->sync;
-	info->var.grayscale		= inf->cmap_greyscale;
-	fbi->cmap_inverse		= inf->cmap_inverse;
-	fbi->cmap_static		= inf->cmap_static;
-	fbi->pcr			= inf->pcr;
-	fbi->lscr1			= inf->lscr1;
-	fbi->dmacr			= inf->dmacr;
-	fbi->pwmr			= inf->pwmr;
-	fbi->lcd_power			= inf->lcd_power;
-	fbi->backlight_power		= inf->backlight_power;
+	info->flags			= FBINFO_FLAG_DEFAULT |
+					  FBINFO_READS_FAST;
+
+	fbi->max_xres			= pdata->xres;
+	info->var.xres			= pdata->xres;
+	info->var.xres_virtual		= pdata->xres;
+	fbi->max_yres			= pdata->yres;
+	info->var.yres			= pdata->yres;
+	info->var.yres_virtual		= pdata->yres;
+	fbi->max_bpp			= pdata->bpp;
+	info->var.bits_per_pixel	= pdata->bpp;
+	info->var.nonstd		= pdata->nonstd;
+	info->var.pixclock		= pdata->pixclock;
+	info->var.hsync_len		= pdata->hsync_len;
+	info->var.left_margin		= pdata->left_margin;
+	info->var.right_margin		= pdata->right_margin;
+	info->var.vsync_len		= pdata->vsync_len;
+	info->var.upper_margin		= pdata->upper_margin;
+	info->var.lower_margin		= pdata->lower_margin;
+	info->var.sync			= pdata->sync;
+	info->var.grayscale		= pdata->cmap_greyscale;
+	fbi->cmap_inverse		= pdata->cmap_inverse;
+	fbi->cmap_static		= pdata->cmap_static;
+	fbi->pcr			= pdata->pcr;
+	fbi->lscr1			= pdata->lscr1;
+	fbi->dmacr			= pdata->dmacr;
+	fbi->pwmr			= pdata->pwmr;
+	fbi->lcd_power			= pdata->lcd_power;
+	fbi->backlight_power		= pdata->backlight_power;
 	info->fix.smem_len		= fbi->max_xres * fbi->max_yres *
 					  fbi->max_bpp / 8;
 
 	return 0;
 }
 
-/*
- *      Allocates the DRAM memory for the frame buffer.  This buffer is
- *	remapped into a non-cached, non-buffered, memory region to
- *      allow pixel writes to occur without flushing the cache.
- *      Once this area is remapped, all virtual memory access to the
- *      video memory should occur at the new region.
- */
-static int __init imxfb_map_video_memory(struct fb_info *info)
-{
-	struct imxfb_info *fbi = info->par;
-
-	fbi->map_size = PAGE_ALIGN(info->fix.smem_len);
-	fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size,
-					&fbi->map_dma,GFP_KERNEL);
-
-	if (fbi->map_cpu) {
-		info->screen_base = fbi->map_cpu;
-		fbi->screen_cpu = fbi->map_cpu;
-		fbi->screen_dma = fbi->map_dma;
-		info->fix.smem_start = fbi->screen_dma;
-	}
-
-	return fbi->map_cpu ? 0 : -ENOMEM;
-}
-
 static int __init imxfb_probe(struct platform_device *pdev)
 {
 	struct imxfb_info *fbi;
 	struct fb_info *info;
-	struct imxfb_mach_info *inf;
+	struct imx_fb_platform_data *pdata;
 	struct resource *res;
 	int ret;
 
 	printk("i.MX Framebuffer driver\n");
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if(!res)
+	if (!res)
 		return -ENODEV;
 
-	inf = pdev->dev.platform_data;
-	if(!inf) {
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
 		dev_err(&pdev->dev,"No platform_data available\n");
 		return -ENOMEM;
 	}
 
 	info = framebuffer_alloc(sizeof(struct imxfb_info), &pdev->dev);
-	if(!info)
+	if (!info)
 		return -ENOMEM;
 
 	fbi = info->par;
 
 	platform_set_drvdata(pdev, info);
 
-	ret = imxfb_init_fbinfo(&pdev->dev);
-	if( ret < 0 )
+	ret = imxfb_init_fbinfo(pdev);
+	if (ret < 0)
 		goto failed_init;
 
-	res = request_mem_region(res->start, res->end - res->start + 1, "IMXFB");
+	res = request_mem_region(res->start, resource_size(res),
+				DRIVER_NAME);
 	if (!res) {
 		ret = -EBUSY;
-		goto failed_regs;
+		goto failed_req;
+	}
+
+	fbi->regs = ioremap(res->start, resource_size(res));
+	if (fbi->regs == NULL) {
+		printk(KERN_ERR"Cannot map frame buffer registers\n");
+		goto failed_ioremap;
 	}
 
-	if (!inf->fixed_screen_cpu) {
-		ret = imxfb_map_video_memory(info);
-		if (ret) {
+	if (!pdata->fixed_screen_cpu) {
+		fbi->map_size = PAGE_ALIGN(info->fix.smem_len);
+		fbi->map_cpu = dma_alloc_writecombine(&pdev->dev,
+				fbi->map_size, &fbi->map_dma, GFP_KERNEL);
+
+		if (!fbi->map_cpu) {
 			dev_err(&pdev->dev, "Failed to allocate video RAM: %d\n", ret);
 			ret = -ENOMEM;
 			goto failed_map;
 		}
+
+		info->screen_base = fbi->map_cpu;
+		fbi->screen_cpu = fbi->map_cpu;
+		fbi->screen_dma = fbi->map_dma;
+		info->fix.smem_start = fbi->screen_dma;
 	} else {
 		/* Fixed framebuffer mapping enables location of the screen in eSRAM */
-		fbi->map_cpu = inf->fixed_screen_cpu;
-		fbi->map_dma = inf->fixed_screen_dma;
+		fbi->map_cpu = pdata->fixed_screen_cpu;
+		fbi->map_dma = pdata->fixed_screen_dma;
 		info->screen_base = fbi->map_cpu;
 		fbi->screen_cpu = fbi->map_cpu;
 		fbi->screen_dma = fbi->map_dma;
@@ -590,12 +656,10 @@ static int __init imxfb_probe(struct platform_device *pdev)
 	 */
 	imxfb_check_var(&info->var, info);
 
-	ret = fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0);
+	ret = fb_alloc_cmap(&info->cmap, 1 << info->var.bits_per_pixel, 0);
 	if (ret < 0)
 		goto failed_cmap;
 
-	imxfb_setup_gpio(fbi);
-
 	imxfb_set_par(info);
 	ret = register_framebuffer(info);
 	if (ret < 0) {
@@ -610,20 +674,22 @@ static int __init imxfb_probe(struct platform_device *pdev)
 failed_register:
 	fb_dealloc_cmap(&info->cmap);
 failed_cmap:
-	if (!inf->fixed_screen_cpu)
+	if (!pdata->fixed_screen_cpu)
 		dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu,
-		           fbi->map_dma);
+			fbi->map_dma);
 failed_map:
-	kfree(info->pseudo_palette);
-failed_regs:
+	iounmap(fbi->regs);
+failed_ioremap:
 	release_mem_region(res->start, res->end - res->start);
+failed_req:
+	kfree(info->pseudo_palette);
 failed_init:
 	platform_set_drvdata(pdev, NULL);
 	framebuffer_release(info);
 	return ret;
 }
 
-static int imxfb_remove(struct platform_device *pdev)
+static int __devexit imxfb_remove(struct platform_device *pdev)
 {
 	struct fb_info *info = platform_get_drvdata(pdev);
 	struct imxfb_info *fbi = info->par;
@@ -639,6 +705,7 @@ static int imxfb_remove(struct platform_device *pdev)
 	kfree(info->pseudo_palette);
 	framebuffer_release(info);
 
+	iounmap(fbi->regs);
 	release_mem_region(res->start, res->end - res->start + 1);
 	platform_set_drvdata(pdev, NULL);
 
@@ -653,19 +720,18 @@ void  imxfb_shutdown(struct platform_device * dev)
 }
 
 static struct platform_driver imxfb_driver = {
-	.probe		= imxfb_probe,
 	.suspend	= imxfb_suspend,
 	.resume		= imxfb_resume,
-	.remove		= imxfb_remove,
+	.remove		= __devexit_p(imxfb_remove),
 	.shutdown	= imxfb_shutdown,
 	.driver		= {
-		.name	= "imx-fb",
+		.name	= DRIVER_NAME,
 	},
 };
 
 int __init imxfb_init(void)
 {
-	return platform_driver_register(&imxfb_driver);
+	return platform_driver_probe(&imxfb_driver, imxfb_probe);
 }
 
 static void __exit imxfb_cleanup(void)
diff --git a/drivers/video/imxfb.h b/drivers/video/imxfb.h
deleted file mode 100644
index e837a8b48eb8..000000000000
--- a/drivers/video/imxfb.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/drivers/video/imxfb.h
- *
- *  Freescale i.MX Frame Buffer device driver
- *
- *  Copyright (C) 2004 S.Hauer, Pengutronix
- *
- *  Copyright (C) 1999 Eric A. Thomas
- *   Based on acornfb.c Copyright (C) Russell King.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * These are the bitfields for each
- * display depth that we support.
- */
-struct imxfb_rgb {
-	struct fb_bitfield	red;
-	struct fb_bitfield	green;
-	struct fb_bitfield	blue;
-	struct fb_bitfield	transp;
-};
-
-#define RGB_16	(0)
-#define RGB_8	(1)
-#define NR_RGB	2
-
-struct imxfb_info {
-	struct device		*dev;
-	struct imxfb_rgb	*rgb[NR_RGB];
-
-	u_int			max_bpp;
-	u_int			max_xres;
-	u_int			max_yres;
-
-	/*
-	 * These are the addresses we mapped
-	 * the framebuffer memory region to.
-	 */
-	dma_addr_t		map_dma;
-	u_char *		map_cpu;
-	u_int			map_size;
-
-	u_char *		screen_cpu;
-	dma_addr_t		screen_dma;
-	u_int			palette_size;
-
-	dma_addr_t		dbar1;
-	dma_addr_t		dbar2;
-
-	u_int			pcr;
-	u_int			pwmr;
-	u_int			lscr1;
-	u_int			dmacr;
-	u_int			cmap_inverse:1,
-				cmap_static:1,
-				unused:30;
-
-	void (*lcd_power)(int);
-	void (*backlight_power)(int);
-};
-
-#define IMX_NAME	"IMX"
-
-/*
- * Minimum X and Y resolutions
- */
-#define MIN_XRES	64
-#define MIN_YRES	64
-
diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c
index b790ddff76f9..ee380d5f3410 100644
--- a/drivers/video/macfb.c
+++ b/drivers/video/macfb.c
@@ -164,7 +164,6 @@ static struct fb_var_screeninfo macfb_defined = {
 };
 
 static struct fb_fix_screeninfo macfb_fix = {
-	.id	= "Macintosh ",
 	.type	= FB_TYPE_PACKED_PIXELS,
 	.accel	= FB_ACCEL_NONE,
 };
@@ -760,22 +759,22 @@ static int __init macfb_init(void)
 
 		switch(ndev->dr_hw) {
 		case NUBUS_DRHW_APPLE_MDC:
-			strcat( macfb_fix.id, "Display Card" );
+			strcpy(macfb_fix.id, "Mac Disp. Card");
 			macfb_setpalette = mdc_setpalette;
 			macfb_defined.activate = FB_ACTIVATE_NOW;
 			break;
 		case NUBUS_DRHW_APPLE_TFB:
-			strcat( macfb_fix.id, "Toby" );
+			strcpy(macfb_fix.id, "Toby");
 			macfb_setpalette = toby_setpalette;
 			macfb_defined.activate = FB_ACTIVATE_NOW;
 			break;
 		case NUBUS_DRHW_APPLE_JET:
-			strcat( macfb_fix.id, "Jet");
+			strcpy(macfb_fix.id, "Jet");
 			macfb_setpalette = jet_setpalette;
 			macfb_defined.activate = FB_ACTIVATE_NOW;
 			break;			
 		default:
-			strcat( macfb_fix.id, "Generic NuBus" );
+			strcpy(macfb_fix.id, "Generic NuBus");
 			break;
 		}
 	}
@@ -786,21 +785,11 @@ static int __init macfb_init(void)
 	if (!video_is_nubus)
 		switch( mac_bi_data.id )
 		{
-			/* These don't have onboard video.  Eventually, we may
-			   be able to write separate framebuffer drivers for
-			   them (tobyfb.c, hiresfb.c, etc, etc) */
-		case MAC_MODEL_II:
-		case MAC_MODEL_IIX:
-		case MAC_MODEL_IICX:
-		case MAC_MODEL_IIFX:
-			strcat( macfb_fix.id, "Generic NuBus" );
-			break;
-
 			/* Valkyrie Quadras */
 		case MAC_MODEL_Q630:
 			/* I'm not sure about this one */
 		case MAC_MODEL_P588:
-			strcat( macfb_fix.id, "Valkyrie built-in" );
+			strcpy(macfb_fix.id, "Valkyrie");
 			macfb_setpalette = valkyrie_setpalette;
 			macfb_defined.activate = FB_ACTIVATE_NOW;
 			valkyrie_cmap_regs = ioremap(DAC_BASE, 0x1000);
@@ -823,7 +812,7 @@ static int __init macfb_init(void)
 		case MAC_MODEL_Q700:
 		case MAC_MODEL_Q900:
 		case MAC_MODEL_Q950:
-			strcat( macfb_fix.id, "DAFB built-in" );
+			strcpy(macfb_fix.id, "DAFB");
 			macfb_setpalette = dafb_setpalette;
 			macfb_defined.activate = FB_ACTIVATE_NOW;
 			dafb_cmap_regs = ioremap(DAFB_BASE, 0x1000);
@@ -831,7 +820,7 @@ static int __init macfb_init(void)
 
 			/* LC II uses the V8 framebuffer */
 		case MAC_MODEL_LCII:
-			strcat( macfb_fix.id, "V8 built-in" );
+			strcpy(macfb_fix.id, "V8");
 			macfb_setpalette = v8_brazil_setpalette;
 			macfb_defined.activate = FB_ACTIVATE_NOW;
 			v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000);
@@ -843,7 +832,7 @@ static int __init macfb_init(void)
 		case MAC_MODEL_IIVI:
 		case MAC_MODEL_IIVX:
 		case MAC_MODEL_P600:
-			strcat( macfb_fix.id, "Brazil built-in" );
+			strcpy(macfb_fix.id, "Brazil");
 			macfb_setpalette = v8_brazil_setpalette;
 			macfb_defined.activate = FB_ACTIVATE_NOW;
 			v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000);
@@ -860,7 +849,7 @@ static int __init macfb_init(void)
 		case MAC_MODEL_P460:
 			macfb_setpalette = v8_brazil_setpalette;
 			macfb_defined.activate = FB_ACTIVATE_NOW;
-			strcat( macfb_fix.id, "Sonora built-in" );
+			strcpy(macfb_fix.id, "Sonora");
 			v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000);
 			break;
 
@@ -871,7 +860,7 @@ static int __init macfb_init(void)
 		case MAC_MODEL_IISI:
 			macfb_setpalette = rbv_setpalette;
 			macfb_defined.activate = FB_ACTIVATE_NOW;
-			strcat( macfb_fix.id, "RBV built-in" );
+			strcpy(macfb_fix.id, "RBV");
 			rbv_cmap_regs = ioremap(DAC_BASE, 0x1000);
 			break;
 
@@ -880,7 +869,7 @@ static int __init macfb_init(void)
 		case MAC_MODEL_C660:
 			macfb_setpalette = civic_setpalette;
 			macfb_defined.activate = FB_ACTIVATE_NOW;
-			strcat( macfb_fix.id, "Civic built-in" );
+			strcpy(macfb_fix.id, "Civic");
 			civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000);
 			break;
 
@@ -901,7 +890,7 @@ static int __init macfb_init(void)
 				v8_brazil_cmap_regs =
 					ioremap(DAC_BASE, 0x1000);
 			}
-			strcat( macfb_fix.id, "LC built-in" );
+			strcpy(macfb_fix.id, "LC");
 			break;
 			/* We think this may be like the LC II */
 		case MAC_MODEL_CCL:
@@ -911,18 +900,18 @@ static int __init macfb_init(void)
 				v8_brazil_cmap_regs =
 					ioremap(DAC_BASE, 0x1000);
 			}
-			strcat( macfb_fix.id, "Color Classic built-in" );
+			strcpy(macfb_fix.id, "Color Classic");
 			break;
 
 			/* And we *do* mean "weirdos" */
 		case MAC_MODEL_TV:
-			strcat( macfb_fix.id, "Mac TV built-in" );
+			strcpy(macfb_fix.id, "Mac TV");
 			break;
 
 			/* These don't have colour, so no need to worry */
 		case MAC_MODEL_SE30:
 		case MAC_MODEL_CLII:
-			strcat( macfb_fix.id, "Monochrome built-in" );
+			strcpy(macfb_fix.id, "Monochrome");
 			break;
 
 			/* Powerbooks are particularly difficult.  Many of
@@ -935,7 +924,7 @@ static int __init macfb_init(void)
 		case MAC_MODEL_PB140:
 		case MAC_MODEL_PB145:
 		case MAC_MODEL_PB170:
-			strcat( macfb_fix.id, "DDC built-in" );
+			strcpy(macfb_fix.id, "DDC");
 			break;
 
 			/* Internal is GSC, External (if present) is ViSC */
@@ -945,13 +934,13 @@ static int __init macfb_init(void)
 		case MAC_MODEL_PB180:
 		case MAC_MODEL_PB210:
 		case MAC_MODEL_PB230:
-			strcat( macfb_fix.id, "GSC built-in" );
+			strcpy(macfb_fix.id, "GSC");
 			break;
 
 			/* Internal is TIM, External is ViSC */
 		case MAC_MODEL_PB165C:
 		case MAC_MODEL_PB180C:
-			strcat( macfb_fix.id, "TIM built-in" );
+			strcpy(macfb_fix.id, "TIM");
 			break;
 
 			/* Internal is CSC, External is Keystone+Ariel. */
@@ -963,12 +952,12 @@ static int __init macfb_init(void)
 		case MAC_MODEL_PB280C:
 			macfb_setpalette = csc_setpalette;
 			macfb_defined.activate = FB_ACTIVATE_NOW;
-			strcat( macfb_fix.id, "CSC built-in" );
+			strcpy(macfb_fix.id, "CSC");
 			csc_cmap_regs = ioremap(CSC_BASE, 0x1000);
 			break;
 		
 		default:
-			strcat( macfb_fix.id, "Unknown/Unsupported built-in" );
+			strcpy(macfb_fix.id, "Unknown");
 			break;
 		}
 
@@ -978,16 +967,23 @@ static int __init macfb_init(void)
 	fb_info.pseudo_palette	= pseudo_palette;
 	fb_info.flags		= FBINFO_DEFAULT;
 
-	fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0);
+	err = fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0);
+	if (err)
+		goto fail_unmap;
 	
 	err = register_framebuffer(&fb_info);
-	if (!err)
-		printk("fb%d: %s frame buffer device\n",
-		       fb_info.node, fb_info.fix.id);
-	else {
-		iounmap(fb_info.screen_base);
-		iounmap_macfb();
-	}
+	if (err)
+		goto fail_dealloc;
+
+	printk("fb%d: %s frame buffer device\n",
+	       fb_info.node, fb_info.fix.id);
+	return 0;
+
+fail_dealloc:
+	fb_dealloc_cmap(&fb_info.cmap);
+fail_unmap:
+	iounmap(fb_info.screen_base);
+	iounmap_macfb();
 	return err;
 }
 
diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c
index 38718d95fbb9..fb64234a3825 100644
--- a/drivers/video/mb862xx/mb862xxfb.c
+++ b/drivers/video/mb862xx/mb862xxfb.c
@@ -927,9 +927,9 @@ static int __devinit mb862xx_pci_probe(struct pci_dev *pdev,
 	}
 
 	dev_dbg(dev, "fb phys 0x%llx 0x%lx\n",
-		(u64)par->fb_base_phys, (ulong)par->mapped_vram);
+		(unsigned long long)par->fb_base_phys, (ulong)par->mapped_vram);
 	dev_dbg(dev, "mmio phys 0x%llx 0x%lx\n",
-		(u64)par->mmio_base_phys, (ulong)par->mmio_len);
+		(unsigned long long)par->mmio_base_phys, (ulong)par->mmio_len);
 
 	if (mb862xx_pci_gdc_init(par))
 		goto io_unmap;
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 99da8b6d2c36..ed13889c1162 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -23,7 +23,6 @@ objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
 objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
 objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
 objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
-objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o
 
 omapfb-objs := $(objs-yy)
 
diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c
deleted file mode 100644
index e55de201b8ff..000000000000
--- a/drivers/video/omap/lcd_sx1.c
+++ /dev/null
@@ -1,327 +0,0 @@
-/*
- * LCD panel support for the Siemens SX1 mobile phone
- *
- * Current version : Vovan888@gmail.com, great help from FCA00000
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/gpio.h>
-#include <mach/omapfb.h>
-#include <mach/mcbsp.h>
-#include <mach/mux.h>
-
-/*
- * OMAP310 GPIO registers
- */
-#define GPIO_DATA_INPUT		0xfffce000
-#define GPIO_DATA_OUTPUT	0xfffce004
-#define GPIO_DIR_CONTROL	0xfffce008
-#define GPIO_INT_CONTROL	0xfffce00c
-#define GPIO_INT_MASK		0xfffce010
-#define GPIO_INT_STATUS		0xfffce014
-#define GPIO_PIN_CONTROL	0xfffce018
-
-
-#define A_LCD_SSC_RD	3
-#define A_LCD_SSC_SD	7
-#define _A_LCD_RESET	9
-#define _A_LCD_SSC_CS	12
-#define _A_LCD_SSC_A0	13
-
-#define DSP_REG		0xE1017024
-
-const unsigned char INIT_1[12] = {
-	0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00
-};
-
-const unsigned char INIT_2[127] = {
-	0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00,
-	0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00,
-	0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00,
-	0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01,
-	0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01,
-	0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01,
-	0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01,
-	0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01,
-	0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01,
-	0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01,
-	0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01,
-	0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01,
-	0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01,
-	0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01,
-	0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02,
-	0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00
-};
-
-const unsigned char INIT_3[15] = {
-	0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59,
-	0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF
-};
-
-static void epson_sendbyte(int flag, unsigned char byte)
-{
-	int i, shifter = 0x80;
-
-	if (!flag)
-		gpio_set_value(_A_LCD_SSC_A0, 0);
-	mdelay(2);
-	gpio_set_value(A_LCD_SSC_RD, 1);
-
-	gpio_set_value(A_LCD_SSC_SD, flag);
-
-	OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
-	OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
-	for (i = 0; i < 8; i++) {
-		OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
-		gpio_set_value(A_LCD_SSC_SD, shifter & byte);
-		OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
-		shifter >>= 1;
-	}
-	gpio_set_value(_A_LCD_SSC_A0, 1);
-}
-
-static void init_system(void)
-{
-	omap_mcbsp_request(OMAP_MCBSP3);
-	omap_mcbsp_stop(OMAP_MCBSP3);
-}
-
-static void setup_GPIO(void)
-{
-	/* new wave */
-	gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd");
-	gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd");
-	gpio_request(_A_LCD_RESET, "lcd_reset");
-	gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs");
-	gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0");
-
-	/* set GPIOs to output, with initial data */
-	gpio_direction_output(A_LCD_SSC_RD, 1);
-	gpio_direction_output(A_LCD_SSC_SD, 0);
-	gpio_direction_output(_A_LCD_RESET, 0);
-	gpio_direction_output(_A_LCD_SSC_CS, 1);
-	gpio_direction_output(_A_LCD_SSC_A0, 1);
-}
-
-static void display_init(void)
-{
-	int i;
-
-	omap_cfg_reg(MCBSP3_CLKX);
-
-	mdelay(2);
-	setup_GPIO();
-	mdelay(2);
-
-	/* reset LCD */
-	gpio_set_value(A_LCD_SSC_SD, 1);
-	epson_sendbyte(0, 0x25);
-
-	gpio_set_value(_A_LCD_RESET, 0);
-	mdelay(10);
-	gpio_set_value(_A_LCD_RESET, 1);
-
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	mdelay(2);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD, phase 1 */
-	epson_sendbyte(0, 0xCA);
-	for (i = 0; i < 10; i++)
-		epson_sendbyte(1, INIT_1[i]);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 2 */
-	epson_sendbyte(0, 0xCB);
-	for (i = 0; i < 125; i++)
-		epson_sendbyte(1, INIT_2[i]);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 2a */
-	epson_sendbyte(0, 0xCC);
-	for (i = 0; i < 14; i++)
-		epson_sendbyte(1, INIT_3[i]);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 3 */
-	epson_sendbyte(0, 0xBC);
-	epson_sendbyte(1, 0x08);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 4 */
-	epson_sendbyte(0, 0x07);
-	epson_sendbyte(1, 0x05);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 5 */
-	epson_sendbyte(0, 0x94);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 6 */
-	epson_sendbyte(0, 0xC6);
-	epson_sendbyte(1, 0x80);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	mdelay(100); /* used to be 1000 */
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 7 */
-	epson_sendbyte(0, 0x16);
-	epson_sendbyte(1, 0x02);
-	epson_sendbyte(1, 0x00);
-	epson_sendbyte(1, 0xB1);
-	epson_sendbyte(1, 0x00);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 8 */
-	epson_sendbyte(0, 0x76);
-	epson_sendbyte(1, 0x00);
-	epson_sendbyte(1, 0x00);
-	epson_sendbyte(1, 0xDB);
-	epson_sendbyte(1, 0x00);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	/* init LCD phase 9 */
-	epson_sendbyte(0, 0xAF);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
-{
-	return 0;
-}
-
-static void sx1_panel_cleanup(struct lcd_panel *panel)
-{
-}
-
-static void sx1_panel_disable(struct lcd_panel *panel)
-{
-	printk(KERN_INFO "SX1: LCD panel disable\n");
-	sx1_setmmipower(0);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-
-	epson_sendbyte(0, 0x25);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	epson_sendbyte(0, 0xAE);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-	mdelay(100);
-	gpio_set_value(_A_LCD_SSC_CS, 0);
-
-	epson_sendbyte(0, 0x95);
-	gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_enable(struct lcd_panel *panel)
-{
-	printk(KERN_INFO "lcd_sx1: LCD panel enable\n");
-	init_system();
-	display_init();
-
-	sx1_setmmipower(1);
-	sx1_setbacklight(0x18);
-	sx1_setkeylight (0x06);
-	return 0;
-}
-
-
-static unsigned long sx1_panel_get_caps(struct lcd_panel *panel)
-{
-	return 0;
-}
-
-struct lcd_panel sx1_panel = {
-	.name		= "sx1",
-	.config		= OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
-			  OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK |
-			  OMAP_LCDC_INV_OUTPUT_EN,
-
-	.x_res		= 176,
-	.y_res		= 220,
-	.data_lines	= 16,
-	.bpp		= 16,
-	.hsw		= 5,
-	.hfp		= 5,
-	.hbp		= 5,
-	.vsw		= 2,
-	.vfp		= 1,
-	.vbp		= 1,
-	.pixel_clock	= 1500,
-
-	.init		= sx1_panel_init,
-	.cleanup	= sx1_panel_cleanup,
-	.enable		= sx1_panel_enable,
-	.disable	= sx1_panel_disable,
-	.get_caps	= sx1_panel_get_caps,
-};
-
-static int sx1_panel_probe(struct platform_device *pdev)
-{
-	omapfb_register_panel(&sx1_panel);
-	return 0;
-}
-
-static int sx1_panel_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-
-static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
-	return 0;
-}
-
-static int sx1_panel_resume(struct platform_device *pdev)
-{
-	return 0;
-}
-
-struct platform_driver sx1_panel_driver = {
-	.probe		= sx1_panel_probe,
-	.remove		= sx1_panel_remove,
-	.suspend	= sx1_panel_suspend,
-	.resume		= sx1_panel_resume,
-	.driver	= {
-		.name	= "lcd_sx1",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int sx1_panel_drv_init(void)
-{
-	return platform_driver_register(&sx1_panel_driver);
-}
-
-static void sx1_panel_drv_cleanup(void)
-{
-	platform_driver_unregister(&sx1_panel_driver);
-}
-
-module_init(sx1_panel_drv_init);
-module_exit(sx1_panel_drv_cleanup);
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 5a5e407dc45f..1a49519dafa4 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -392,7 +392,7 @@ static void set_fb_fix(struct fb_info *fbi)
 	int bpp;
 
 	rg = &plane->fbdev->mem_desc.region[plane->idx];
-	fbi->screen_base	= (char __iomem *)rg->vaddr;
+	fbi->screen_base	= rg->vaddr;
 	fix->smem_start		= rg->paddr;
 	fix->smem_len		= rg->size;
 
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index ab689597f259..d0fd22e06737 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1388,7 +1388,7 @@ static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev)
 	memset(fbi, 0, sizeof(struct pxafb_info));
 	fbi->dev = dev;
 
-	fbi->clk = clk_get(dev, "LCDCLK");
+	fbi->clk = clk_get(dev, NULL);
 	if (IS_ERR(fbi->clk)) {
 		kfree(fbi);
 		return NULL;
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index c052bd4c0b06..076f946fa0f5 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -114,7 +114,7 @@
  *	- convert dma address types to dma_addr_t
  *	- remove unused 'montype' stuff
  *	- remove redundant zero inits of init_var after the initial
- *	  memzero.
+ *	  memset.
  *	- remove allow_modeset (acornfb idea does not belong here)
  *
  * 2001/05/28: <rmk@arm.linux.org.uk>
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index a463b3dd837b..2493f05e9f61 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -668,7 +668,7 @@ static struct xenbus_device_id xenfb_ids[] = {
 	{ "" }
 };
 
-static struct xenbus_driver xenfb = {
+static struct xenbus_driver xenfb_driver = {
 	.name = "vfb",
 	.owner = THIS_MODULE,
 	.ids = xenfb_ids,
@@ -687,12 +687,12 @@ static int __init xenfb_init(void)
 	if (xen_initial_domain())
 		return -ENODEV;
 
-	return xenbus_register_frontend(&xenfb);
+	return xenbus_register_frontend(&xenfb_driver);
 }
 
 static void __exit xenfb_cleanup(void)
 {
-	xenbus_unregister_driver(&xenfb);
+	xenbus_unregister_driver(&xenfb_driver);
 }
 
 module_init(xenfb_init);
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 5da3d2423cc0..40a3a2afbfe7 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -298,8 +298,9 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
 
 	/* Put a banner in the log (for DEBUG) */
 	dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
-	dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
-		(void*)drvdata->fb_phys, drvdata->fb_virt, fbsize);
+	dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
+		(unsigned long long) drvdata->fb_phys, drvdata->fb_virt,
+		fbsize);
 
 	return 0;	/* success */
 
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index a14d5b6e4c7c..90616822cd20 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -36,7 +36,7 @@ config W1_MASTER_DS2482
 
 config W1_MASTER_DS1WM
 	tristate "Maxim DS1WM 1-wire busmaster"
-	depends on W1 && ARM
+	depends on W1 && ARM && HAVE_CLK
 	help
 	  Say Y here to enable the DS1WM 1-wire driver, such as that
 	  in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index a3765e0be4a8..763c1ea5dce5 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -40,6 +40,7 @@
 #include <linux/bootmem.h>
 #include <linux/slab.h>
 #include <asm/desc.h>
+#include <asm/cacheflush.h>
 
 #define PCI_BIOS32_SD_VALUE		0x5F32335F	/* "_32_" */
 #define CRU_BIOS_SIGNATURE_VALUE	0x55524324
@@ -394,6 +395,8 @@ static void __devinit dmi_find_cru(const struct dmi_header *dm)
 				smbios_cru64_ptr->double_offset;
 			cru_rom_addr = ioremap(cru_physical_address,
 				smbios_cru64_ptr->double_length);
+			set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK,
+				smbios_cru64_ptr->double_length >> PAGE_SHIFT);
 		}
 	}
 }
@@ -482,7 +485,7 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
 			"Management Log for details.\n");
 	}
 
-	return NOTIFY_STOP;
+	return NOTIFY_OK;
 }
 
 /*
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
index ca344a85eb95..2474ebca88f6 100644
--- a/drivers/watchdog/iTCO_vendor_support.c
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -1,7 +1,7 @@
 /*
  *	intel TCO vendor specific watchdog driver support
  *
- *	(c) Copyright 2006 Wim Van Sebroeck <wim@iguana.be>.
+ *	(c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -19,8 +19,7 @@
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_vendor_support"
-#define DRV_VERSION	"1.01"
-#define DRV_RELDATE	"11-Nov-2006"
+#define DRV_VERSION	"1.02"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -78,24 +77,6 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n
  *	    20.6 seconds.
  */
 
-static void supermicro_old_pre_start(unsigned long acpibase)
-{
-	unsigned long val32;
-
-	val32 = inl(SMI_EN);
-	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
-	outl(val32, SMI_EN);	/* Needed to activate watchdog */
-}
-
-static void supermicro_old_pre_stop(unsigned long acpibase)
-{
-	unsigned long val32;
-
-	val32 = inl(SMI_EN);
-	val32 &= 0x00002000;	/* Turn on SMI clearing watchdog */
-	outl(val32, SMI_EN);	/* Needed to deactivate watchdog */
-}
-
 static void supermicro_old_pre_keepalive(unsigned long acpibase)
 {
 	/* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
@@ -247,18 +228,14 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
 void iTCO_vendor_pre_start(unsigned long acpibase,
 			   unsigned int heartbeat)
 {
-	if (vendorsupport == SUPERMICRO_OLD_BOARD)
-		supermicro_old_pre_start(acpibase);
-	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+	if (vendorsupport == SUPERMICRO_NEW_BOARD)
 		supermicro_new_pre_start(heartbeat);
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_start);
 
 void iTCO_vendor_pre_stop(unsigned long acpibase)
 {
-	if (vendorsupport == SUPERMICRO_OLD_BOARD)
-		supermicro_old_pre_stop(acpibase);
-	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+	if (vendorsupport == SUPERMICRO_NEW_BOARD)
 		supermicro_new_pre_stop();
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_stop);
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index bfb93bc2ca9f..5b395a4ddfdf 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -1,7 +1,7 @@
 /*
  *	intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets)
  *
- *	(c) Copyright 2006-2007 Wim Van Sebroeck <wim@iguana.be>.
+ *	(c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -20,34 +20,41 @@
  *	82801BAM (ICH2-M)    : document number 290687-002, 298242-027,
  *	82801CA  (ICH3-S)    : document number 290733-003, 290739-013,
  *	82801CAM (ICH3-M)    : document number 290716-001, 290718-007,
- *	82801DB  (ICH4)      : document number 290744-001, 290745-020,
- *	82801DBM (ICH4-M)    : document number 252337-001, 252663-005,
+ *	82801DB  (ICH4)      : document number 290744-001, 290745-025,
+ *	82801DBM (ICH4-M)    : document number 252337-001, 252663-008,
  *	82801E   (C-ICH)     : document number 273599-001, 273645-002,
- *	82801EB  (ICH5)      : document number 252516-001, 252517-003,
- *	82801ER  (ICH5R)     : document number 252516-001, 252517-003,
- *	82801FB  (ICH6)      : document number 301473-002, 301474-007,
- *	82801FR  (ICH6R)     : document number 301473-002, 301474-007,
- *	82801FBM (ICH6-M)    : document number 301473-002, 301474-007,
- *	82801FW  (ICH6W)     : document number 301473-001, 301474-007,
- *	82801FRW (ICH6RW)    : document number 301473-001, 301474-007,
- *	82801GB  (ICH7)      : document number 307013-002, 307014-009,
- *	82801GR  (ICH7R)     : document number 307013-002, 307014-009,
- *	82801GDH (ICH7DH)    : document number 307013-002, 307014-009,
- *	82801GBM (ICH7-M)    : document number 307013-002, 307014-009,
- *	82801GHM (ICH7-M DH) : document number 307013-002, 307014-009,
- *	82801HB  (ICH8)      : document number 313056-003, 313057-009,
- *	82801HR  (ICH8R)     : document number 313056-003, 313057-009,
- *	82801HBM (ICH8M)     : document number 313056-003, 313057-009,
- *	82801HH  (ICH8DH)    : document number 313056-003, 313057-009,
- *	82801HO  (ICH8DO)    : document number 313056-003, 313057-009,
- *	82801HEM (ICH8M-E)   : document number 313056-003, 313057-009,
- *	82801IB  (ICH9)      : document number 316972-001, 316973-006,
- *	82801IR  (ICH9R)     : document number 316972-001, 316973-006,
- *	82801IH  (ICH9DH)    : document number 316972-001, 316973-006,
- *	82801IO  (ICH9DO)    : document number 316972-001, 316973-006,
- *	6300ESB  (6300ESB)   : document number 300641-003, 300884-010,
- *	631xESB  (631xESB)   : document number 313082-001, 313075-005,
- *	632xESB  (632xESB)   : document number 313082-001, 313075-005
+ *	82801EB  (ICH5)      : document number 252516-001, 252517-028,
+ *	82801ER  (ICH5R)     : document number 252516-001, 252517-028,
+ *	6300ESB  (6300ESB)   : document number 300641-004, 300884-013,
+ *	82801FB  (ICH6)      : document number 301473-002, 301474-026,
+ *	82801FR  (ICH6R)     : document number 301473-002, 301474-026,
+ *	82801FBM (ICH6-M)    : document number 301473-002, 301474-026,
+ *	82801FW  (ICH6W)     : document number 301473-001, 301474-026,
+ *	82801FRW (ICH6RW)    : document number 301473-001, 301474-026,
+ *	631xESB  (631xESB)   : document number 313082-001, 313075-006,
+ *	632xESB  (632xESB)   : document number 313082-001, 313075-006,
+ *	82801GB  (ICH7)      : document number 307013-003, 307014-024,
+ *	82801GR  (ICH7R)     : document number 307013-003, 307014-024,
+ *	82801GDH (ICH7DH)    : document number 307013-003, 307014-024,
+ *	82801GBM (ICH7-M)    : document number 307013-003, 307014-024,
+ *	82801GHM (ICH7-M DH) : document number 307013-003, 307014-024,
+ *	82801GU  (ICH7-U)    : document number 307013-003, 307014-024,
+ *	82801HB  (ICH8)      : document number 313056-003, 313057-017,
+ *	82801HR  (ICH8R)     : document number 313056-003, 313057-017,
+ *	82801HBM (ICH8M)     : document number 313056-003, 313057-017,
+ *	82801HH  (ICH8DH)    : document number 313056-003, 313057-017,
+ *	82801HO  (ICH8DO)    : document number 313056-003, 313057-017,
+ *	82801HEM (ICH8M-E)   : document number 313056-003, 313057-017,
+ *	82801IB  (ICH9)      : document number 316972-004, 316973-012,
+ *	82801IR  (ICH9R)     : document number 316972-004, 316973-012,
+ *	82801IH  (ICH9DH)    : document number 316972-004, 316973-012,
+ *	82801IO  (ICH9DO)    : document number 316972-004, 316973-012,
+ *	82801IBM (ICH9M)     : document number 316972-004, 316973-012,
+ *	82801IEM (ICH9M-E)   : document number 316972-004, 316973-012,
+ *	82801JIB (ICH10)     : document number 319973-002, 319974-002,
+ *	82801JIR (ICH10R)    : document number 319973-002, 319974-002,
+ *	82801JD  (ICH10D)    : document number 319973-002, 319974-002,
+ *	82801JDO (ICH10DO)   : document number 319973-002, 319974-002
  */
 
 /*
@@ -56,8 +63,7 @@
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_wdt"
-#define DRV_VERSION	"1.03"
-#define DRV_RELDATE	"30-Apr-2008"
+#define DRV_VERSION	"1.04"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -96,19 +102,26 @@ enum iTCO_chipsets {
 	TCO_ICH6,	/* ICH6 & ICH6R */
 	TCO_ICH6M,	/* ICH6-M */
 	TCO_ICH6W,	/* ICH6W & ICH6RW */
+	TCO_631XESB,	/* 631xESB/632xESB */
 	TCO_ICH7,	/* ICH7 & ICH7R */
-	TCO_ICH7M,	/* ICH7-M */
+	TCO_ICH7DH,	/* ICH7DH */
+	TCO_ICH7M,	/* ICH7-M & ICH7-U */
 	TCO_ICH7MDH,	/* ICH7-M DH */
 	TCO_ICH8,	/* ICH8 & ICH8R */
-	TCO_ICH8ME,	/* ICH8M-E */
 	TCO_ICH8DH,	/* ICH8DH */
 	TCO_ICH8DO,	/* ICH8DO */
 	TCO_ICH8M,	/* ICH8M */
+	TCO_ICH8ME,	/* ICH8M-E */
 	TCO_ICH9,	/* ICH9 */
 	TCO_ICH9R,	/* ICH9R */
 	TCO_ICH9DH,	/* ICH9DH */
 	TCO_ICH9DO,	/* ICH9DO */
-	TCO_631XESB,	/* 631xESB/632xESB */
+	TCO_ICH9M,	/* ICH9M */
+	TCO_ICH9ME,	/* ICH9M-E */
+	TCO_ICH10,	/* ICH10 */
+	TCO_ICH10R,	/* ICH10R */
+	TCO_ICH10D,	/* ICH10D */
+	TCO_ICH10DO,	/* ICH10DO */
 };
 
 static struct {
@@ -129,19 +142,26 @@ static struct {
 	{"ICH6 or ICH6R", 2},
 	{"ICH6-M", 2},
 	{"ICH6W or ICH6RW", 2},
+	{"631xESB/632xESB", 2},
 	{"ICH7 or ICH7R", 2},
-	{"ICH7-M", 2},
+	{"ICH7DH", 2},
+	{"ICH7-M or ICH7-U", 2},
 	{"ICH7-M DH", 2},
 	{"ICH8 or ICH8R", 2},
-	{"ICH8M-E", 2},
 	{"ICH8DH", 2},
 	{"ICH8DO", 2},
 	{"ICH8M", 2},
+	{"ICH8M-E", 2},
 	{"ICH9", 2},
 	{"ICH9R", 2},
 	{"ICH9DH", 2},
 	{"ICH9DO", 2},
-	{"631xESB/632xESB", 2},
+	{"ICH9M", 2},
+	{"ICH9M-E", 2},
+	{"ICH10", 2},
+	{"ICH10R", 2},
+	{"ICH10D", 2},
+	{"ICH10DO", 2},
 	{NULL, 0}
 };
 
@@ -175,18 +195,6 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = {
 	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0,		TCO_ICH6)},
 	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1,		TCO_ICH6M)},
 	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2,		TCO_ICH6W)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0,		TCO_ICH7)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1,		TCO_ICH7M)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31,		TCO_ICH7MDH)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0,		TCO_ICH8)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1,		TCO_ICH8ME)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2,		TCO_ICH8DH)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3,		TCO_ICH8DO)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4,		TCO_ICH8M)},
-	{ ITCO_PCI_DEVICE(0x2918,				TCO_ICH9)},
-	{ ITCO_PCI_DEVICE(0x2916,				TCO_ICH9R)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2,		TCO_ICH9DH)},
-	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4,		TCO_ICH9DO)},
 	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0,		TCO_631XESB)},
 	{ ITCO_PCI_DEVICE(0x2671,				TCO_631XESB)},
 	{ ITCO_PCI_DEVICE(0x2672,				TCO_631XESB)},
@@ -203,6 +211,25 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = {
 	{ ITCO_PCI_DEVICE(0x267d,				TCO_631XESB)},
 	{ ITCO_PCI_DEVICE(0x267e,				TCO_631XESB)},
 	{ ITCO_PCI_DEVICE(0x267f,				TCO_631XESB)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0,		TCO_ICH7)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_30,		TCO_ICH7DH)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1,		TCO_ICH7M)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31,		TCO_ICH7MDH)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0,		TCO_ICH8)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2,		TCO_ICH8DH)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3,		TCO_ICH8DO)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4,		TCO_ICH8M)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1,		TCO_ICH8ME)},
+	{ ITCO_PCI_DEVICE(0x2918,				TCO_ICH9)},
+	{ ITCO_PCI_DEVICE(0x2916,				TCO_ICH9R)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2,		TCO_ICH9DH)},
+	{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4,		TCO_ICH9DO)},
+	{ ITCO_PCI_DEVICE(0x2919,				TCO_ICH9M)},
+	{ ITCO_PCI_DEVICE(0x2917,				TCO_ICH9ME)},
+	{ ITCO_PCI_DEVICE(0x3a18,				TCO_ICH10)},
+	{ ITCO_PCI_DEVICE(0x3a16,				TCO_ICH10R)},
+	{ ITCO_PCI_DEVICE(0x3a1a,				TCO_ICH10D)},
+	{ ITCO_PCI_DEVICE(0x3a14,				TCO_ICH10DO)},
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
@@ -311,6 +338,7 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void)
 static int iTCO_wdt_start(void)
 {
 	unsigned int val;
+	unsigned long val32;
 
 	spin_lock(&iTCO_wdt_private.io_lock);
 
@@ -323,6 +351,18 @@ static int iTCO_wdt_start(void)
 		return -EIO;
 	}
 
+	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+	val32 = inl(SMI_EN);
+	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
+	outl(val32, SMI_EN);
+
+	/* Force the timer to its reload value by writing to the TCO_RLD
+	   register */
+	if (iTCO_wdt_private.iTCO_version == 2)
+		outw(0x01, TCO_RLD);
+	else if (iTCO_wdt_private.iTCO_version == 1)
+		outb(0x01, TCO_RLD);
+
 	/* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
 	val = inw(TCO1_CNT);
 	val &= 0xf7ff;
@@ -338,6 +378,7 @@ static int iTCO_wdt_start(void)
 static int iTCO_wdt_stop(void)
 {
 	unsigned int val;
+	unsigned long val32;
 
 	spin_lock(&iTCO_wdt_private.io_lock);
 
@@ -349,6 +390,11 @@ static int iTCO_wdt_stop(void)
 	outw(val, TCO1_CNT);
 	val = inw(TCO1_CNT);
 
+	/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
+	val32 = inl(SMI_EN);
+	val32 |= 0x00002000;
+	outl(val32, SMI_EN);
+
 	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
 	iTCO_wdt_set_NO_REBOOT_bit();
 
@@ -459,7 +505,6 @@ static int iTCO_wdt_open(struct inode *inode, struct file *file)
 	/*
 	 *      Reload and activate timer
 	 */
-	iTCO_wdt_keepalive();
 	iTCO_wdt_start();
 	return nonseekable_open(inode, file);
 }
@@ -604,7 +649,6 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 	int ret;
 	u32 base_address;
 	unsigned long RCBA;
-	unsigned long val32;
 
 	/*
 	 *      Find the ACPI/PM base I/O address which is the base
@@ -644,17 +688,13 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
 	iTCO_wdt_set_NO_REBOOT_bit();
 
-	/* Set the TCO_EN bit in SMI_EN register */
+	/* The TCO logic uses the TCO_EN bit in the SMI_EN register */
 	if (!request_region(SMI_EN, 4, "iTCO_wdt")) {
 		printk(KERN_ERR PFX
 			"I/O address 0x%04lx already in use\n", SMI_EN);
 		ret = -EIO;
 		goto out;
 	}
-	val32 = inl(SMI_EN);
-	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
-	outl(val32, SMI_EN);
-	release_region(SMI_EN, 4);
 
 	/* The TCO I/O registers reside in a 32-byte range pointed to
 	   by the TCOBASE value */
@@ -662,7 +702,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 		printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n",
 			TCOBASE);
 		ret = -EIO;
-		goto out;
+		goto unreg_smi_en;
 	}
 
 	printk(KERN_INFO PFX
@@ -672,8 +712,9 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 			TCOBASE);
 
 	/* Clear out the (probably old) status */
-	outb(0, TCO1_STS);
-	outb(3, TCO2_STS);
+	outb(8, TCO1_STS);	/* Clear the Time Out Status bit */
+	outb(2, TCO2_STS);	/* Clear SECOND_TO_STS bit */
+	outb(4, TCO2_STS);	/* Clear BOOT_STS bit */
 
 	/* Make sure the watchdog is not running */
 	iTCO_wdt_stop();
@@ -701,6 +742,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 
 unreg_region:
 	release_region(TCOBASE, 0x20);
+unreg_smi_en:
+	release_region(SMI_EN, 4);
 out:
 	if (iTCO_wdt_private.iTCO_version == 2)
 		iounmap(iTCO_wdt_private.gcs);
@@ -718,6 +761,7 @@ static void __devexit iTCO_wdt_cleanup(void)
 	/* Deregister */
 	misc_deregister(&iTCO_wdt_miscdev);
 	release_region(TCOBASE, 0x20);
+	release_region(SMI_EN, 4);
 	if (iTCO_wdt_private.iTCO_version == 2)
 		iounmap(iTCO_wdt_private.gcs);
 	pci_dev_put(iTCO_wdt_private.pdev);
@@ -782,8 +826,8 @@ static int __init iTCO_wdt_init_module(void)
 {
 	int err;
 
-	printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s (%s)\n",
-		DRV_VERSION, DRV_RELDATE);
+	printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s\n",
+		DRV_VERSION);
 
 	err = platform_driver_register(&iTCO_wdt_driver);
 	if (err)
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index b4b7b0a4c119..3acce623f209 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -98,6 +98,8 @@ static void mtx1_wdt_reset(void)
 
 static void mtx1_wdt_start(void)
 {
+	unsigned long flags;
+
 	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
 	if (!mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 1;
@@ -110,6 +112,8 @@ static void mtx1_wdt_start(void)
 
 static int mtx1_wdt_stop(void)
 {
+	unsigned long flags;
+
 	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
 	if (mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 0;
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index f7f6ce82a5e2..e31925ee8346 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -42,7 +42,7 @@
 #undef S3C_VA_WATCHDOG
 #define S3C_VA_WATCHDOG (0)
 
-#include <asm/plat-s3c/regs-watchdog.h>
+#include <plat/regs-watchdog.h>
 
 #define PFX "s3c2410-wdt: "
 
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index ed01e4c2beff..d6fbb4657210 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -27,6 +27,7 @@
 #include <linux/init.h>
 #include <linux/bitops.h>
 #include <linux/uaccess.h>
+#include <linux/timex.h>
 
 #ifdef CONFIG_ARCH_PXA
 #include <mach/pxa-regs.h>
diff --git a/fs/block_dev.c b/fs/block_dev.c
index db831efbdbbd..99e0ae1a4c78 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1135,12 +1135,15 @@ static int blkdev_open(struct inode * inode, struct file * filp)
 	if (res)
 		return res;
 
-	if (!(filp->f_mode & FMODE_EXCL))
-		return 0;
+	if (filp->f_mode & FMODE_EXCL) {
+		res = bd_claim(bdev, filp);
+		if (res)
+			goto out_blkdev_put;
+	}
 
-	if (!(res = bd_claim(bdev, filp)))
-		return 0;
+	return 0;
 
+ out_blkdev_put:
 	blkdev_put(bdev, filp->f_mode);
 	return res;
 }
@@ -1203,8 +1206,16 @@ static long block_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 {
 	struct block_device *bdev = I_BDEV(file->f_mapping->host);
 	fmode_t mode = file->f_mode;
+
+	/*
+	 * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
+	 * to updated it before every ioctl.
+	 */
 	if (file->f_flags & O_NDELAY)
-		mode |= FMODE_NDELAY_NOW;
+		mode |= FMODE_NDELAY;
+	else
+		mode &= ~FMODE_NDELAY;
+
 	return blkdev_ioctl(bdev, mode, cmd, arg);
 }
 
diff --git a/fs/buffer.c b/fs/buffer.c
index 6569fda5cfed..10179cfa1152 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -878,6 +878,7 @@ void invalidate_inode_buffers(struct inode *inode)
 		spin_unlock(&buffer_mapping->private_lock);
 	}
 }
+EXPORT_SYMBOL(invalidate_inode_buffers);
 
 /*
  * Remove any clean buffers from the inode's buffer list.  This is called
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index b691b893a848..f0a81e631ae6 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1475,7 +1475,11 @@ static int cifs_write_end(struct file *file, struct address_space *mapping,
 	cFYI(1, ("write_end for page %p from pos %lld with %d bytes",
 		 page, pos, copied));
 
-	if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE)
+	if (PageChecked(page)) {
+		if (copied == len)
+			SetPageUptodate(page);
+		ClearPageChecked(page);
+	} else if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE)
 		SetPageUptodate(page);
 
 	if (!PageUptodate(page)) {
@@ -2062,39 +2066,70 @@ static int cifs_write_begin(struct file *file, struct address_space *mapping,
 {
 	pgoff_t index = pos >> PAGE_CACHE_SHIFT;
 	loff_t offset = pos & (PAGE_CACHE_SIZE - 1);
+	loff_t page_start = pos & PAGE_MASK;
+	loff_t i_size;
+	struct page *page;
+	int rc = 0;
 
 	cFYI(1, ("write_begin from %lld len %d", (long long)pos, len));
 
-	*pagep = __grab_cache_page(mapping, index);
-	if (!*pagep)
-		return -ENOMEM;
-
-	if (PageUptodate(*pagep))
-		return 0;
+	page = __grab_cache_page(mapping, index);
+	if (!page) {
+		rc = -ENOMEM;
+		goto out;
+	}
 
-	/* If we are writing a full page it will be up to date,
-	   no need to read from the server */
-	if (len == PAGE_CACHE_SIZE && flags & AOP_FLAG_UNINTERRUPTIBLE)
-		return 0;
+	if (PageUptodate(page))
+		goto out;
 
-	if ((file->f_flags & O_ACCMODE) != O_WRONLY) {
-		int rc;
+	/*
+	 * If we write a full page it will be up to date, no need to read from
+	 * the server. If the write is short, we'll end up doing a sync write
+	 * instead.
+	 */
+	if (len == PAGE_CACHE_SIZE)
+		goto out;
 
-		/* might as well read a page, it is fast enough */
-		rc = cifs_readpage_worker(file, *pagep, &offset);
+	/*
+	 * optimize away the read when we have an oplock, and we're not
+	 * expecting to use any of the data we'd be reading in. That
+	 * is, when the page lies beyond the EOF, or straddles the EOF
+	 * and the write will cover all of the existing data.
+	 */
+	if (CIFS_I(mapping->host)->clientCanCacheRead) {
+		i_size = i_size_read(mapping->host);
+		if (page_start >= i_size ||
+		    (offset == 0 && (pos + len) >= i_size)) {
+			zero_user_segments(page, 0, offset,
+					   offset + len,
+					   PAGE_CACHE_SIZE);
+			/*
+			 * PageChecked means that the parts of the page
+			 * to which we're not writing are considered up
+			 * to date. Once the data is copied to the
+			 * page, it can be set uptodate.
+			 */
+			SetPageChecked(page);
+			goto out;
+		}
+	}
 
-		/* we do not need to pass errors back
-		   e.g. if we do not have read access to the file
-		   because cifs_write_end will attempt synchronous writes
-		   -- shaggy */
+	if ((file->f_flags & O_ACCMODE) != O_WRONLY) {
+		/*
+		 * might as well read a page, it is fast enough. If we get
+		 * an error, we don't need to return it. cifs_write_end will
+		 * do a sync write instead since PG_uptodate isn't set.
+		 */
+		cifs_readpage_worker(file, page, &page_start);
 	} else {
 		/* we could try using another file handle if there is one -
 		   but how would we lock it to prevent close of that handle
 		   racing with this read? In any case
 		   this will be written out by write_end so is fine */
 	}
-
-	return 0;
+out:
+	*pagep = page;
+	return rc;
 }
 
 const struct address_space_operations cifs_addr_ops = {
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index aec5c13f6341..96355d505347 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -102,6 +102,8 @@
 
 #define EP_UNACTIVE_PTR ((void *) -1L)
 
+#define EP_ITEM_COST (sizeof(struct epitem) + sizeof(struct eppoll_entry))
+
 struct epoll_filefd {
 	struct file *file;
 	int fd;
@@ -200,6 +202,9 @@ struct eventpoll {
 	 * holding ->lock.
 	 */
 	struct epitem *ovflist;
+
+	/* The user that created the eventpoll descriptor */
+	struct user_struct *user;
 };
 
 /* Wait structure used by the poll hooks */
@@ -227,9 +232,17 @@ struct ep_pqueue {
 };
 
 /*
+ * Configuration options available inside /proc/sys/fs/epoll/
+ */
+/* Maximum number of epoll devices, per user */
+static int max_user_instances __read_mostly;
+/* Maximum number of epoll watched descriptors, per user */
+static int max_user_watches __read_mostly;
+
+/*
  * This mutex is used to serialize ep_free() and eventpoll_release_file().
  */
-static struct mutex epmutex;
+static DEFINE_MUTEX(epmutex);
 
 /* Safe wake up implementation */
 static struct poll_safewake psw;
@@ -240,6 +253,33 @@ static struct kmem_cache *epi_cache __read_mostly;
 /* Slab cache used to allocate "struct eppoll_entry" */
 static struct kmem_cache *pwq_cache __read_mostly;
 
+#ifdef CONFIG_SYSCTL
+
+#include <linux/sysctl.h>
+
+static int zero;
+
+ctl_table epoll_table[] = {
+	{
+		.procname	= "max_user_instances",
+		.data		= &max_user_instances,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.extra1		= &zero,
+	},
+	{
+		.procname	= "max_user_watches",
+		.data		= &max_user_watches,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.extra1		= &zero,
+	},
+	{ .ctl_name = 0 }
+};
+#endif /* CONFIG_SYSCTL */
+
 
 /* Setup the structure that is used as key for the RB tree */
 static inline void ep_set_ffd(struct epoll_filefd *ffd,
@@ -402,6 +442,8 @@ static int ep_remove(struct eventpoll *ep, struct epitem *epi)
 	/* At this point it is safe to free the eventpoll item */
 	kmem_cache_free(epi_cache, epi);
 
+	atomic_dec(&ep->user->epoll_watches);
+
 	DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_remove(%p, %p)\n",
 		     current, ep, file));
 
@@ -449,6 +491,8 @@ static void ep_free(struct eventpoll *ep)
 
 	mutex_unlock(&epmutex);
 	mutex_destroy(&ep->mtx);
+	atomic_dec(&ep->user->epoll_devs);
+	free_uid(ep->user);
 	kfree(ep);
 }
 
@@ -532,10 +576,19 @@ void eventpoll_release_file(struct file *file)
 
 static int ep_alloc(struct eventpoll **pep)
 {
-	struct eventpoll *ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+	int error;
+	struct user_struct *user;
+	struct eventpoll *ep;
 
-	if (!ep)
-		return -ENOMEM;
+	user = get_current_user();
+	error = -EMFILE;
+	if (unlikely(atomic_read(&user->epoll_devs) >=
+			max_user_instances))
+		goto free_uid;
+	error = -ENOMEM;
+	ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+	if (unlikely(!ep))
+		goto free_uid;
 
 	spin_lock_init(&ep->lock);
 	mutex_init(&ep->mtx);
@@ -544,12 +597,17 @@ static int ep_alloc(struct eventpoll **pep)
 	INIT_LIST_HEAD(&ep->rdllist);
 	ep->rbr = RB_ROOT;
 	ep->ovflist = EP_UNACTIVE_PTR;
+	ep->user = user;
 
 	*pep = ep;
 
 	DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_alloc() ep=%p\n",
 		     current, ep));
 	return 0;
+
+free_uid:
+	free_uid(user);
+	return error;
 }
 
 /*
@@ -703,9 +761,11 @@ static int ep_insert(struct eventpoll *ep, struct epoll_event *event,
 	struct epitem *epi;
 	struct ep_pqueue epq;
 
-	error = -ENOMEM;
+	if (unlikely(atomic_read(&ep->user->epoll_watches) >=
+		     max_user_watches))
+		return -ENOSPC;
 	if (!(epi = kmem_cache_alloc(epi_cache, GFP_KERNEL)))
-		goto error_return;
+		return -ENOMEM;
 
 	/* Item initialization follow here ... */
 	INIT_LIST_HEAD(&epi->rdllink);
@@ -735,6 +795,7 @@ static int ep_insert(struct eventpoll *ep, struct epoll_event *event,
 	 * install process. Namely an allocation for a wait queue failed due
 	 * high memory pressure.
 	 */
+	error = -ENOMEM;
 	if (epi->nwait < 0)
 		goto error_unregister;
 
@@ -765,6 +826,8 @@ static int ep_insert(struct eventpoll *ep, struct epoll_event *event,
 
 	spin_unlock_irqrestore(&ep->lock, flags);
 
+	atomic_inc(&ep->user->epoll_watches);
+
 	/* We have to call this outside the lock */
 	if (pwake)
 		ep_poll_safewake(&psw, &ep->poll_wait);
@@ -789,7 +852,7 @@ error_unregister:
 	spin_unlock_irqrestore(&ep->lock, flags);
 
 	kmem_cache_free(epi_cache, epi);
-error_return:
+
 	return error;
 }
 
@@ -1078,6 +1141,7 @@ asmlinkage long sys_epoll_create1(int flags)
 			      flags & O_CLOEXEC);
 	if (fd < 0)
 		ep_free(ep);
+	atomic_inc(&ep->user->epoll_devs);
 
 error_return:
 	DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
@@ -1299,7 +1363,12 @@ asmlinkage long sys_epoll_pwait(int epfd, struct epoll_event __user *events,
 
 static int __init eventpoll_init(void)
 {
-	mutex_init(&epmutex);
+	struct sysinfo si;
+
+	si_meminfo(&si);
+	max_user_instances = 128;
+	max_user_watches = (((si.totalram - si.totalhigh) / 32) << PAGE_SHIFT) /
+		EP_ITEM_COST;
 
 	/* Initialize the structure used to perform safe poll wait head wake ups */
 	ep_poll_safewake_init(&psw);
diff --git a/fs/exec.c b/fs/exec.c
index 4e834f16d9da..ec5df9a38313 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1159,6 +1159,7 @@ EXPORT_SYMBOL(remove_arg_zero);
  */
 int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs)
 {
+	unsigned int depth = bprm->recursion_depth;
 	int try,retval;
 	struct linux_binfmt *fmt;
 #ifdef __alpha__
@@ -1219,8 +1220,15 @@ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs)
 				continue;
 			read_unlock(&binfmt_lock);
 			retval = fn(bprm, regs);
+			/*
+			 * Restore the depth counter to its starting value
+			 * in this call, so we don't have to rely on every
+			 * load_binary function to restore it on return.
+			 */
+			bprm->recursion_depth = depth;
 			if (retval >= 0) {
-				tracehook_report_exec(fmt, bprm, regs);
+				if (depth == 0)
+					tracehook_report_exec(fmt, bprm, regs);
 				put_binfmt(fmt);
 				allow_write_access(bprm->file);
 				if (bprm->file)
diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index 80246bad1b7f..890e01828817 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -367,6 +367,8 @@ struct dentry *exportfs_decode_fh(struct vfsmount *mnt, struct fid *fid,
 	 * Try to get any dentry for the given file handle from the filesystem.
 	 */
 	result = nop->fh_to_dentry(mnt->mnt_sb, fid, fh_len, fileid_type);
+	if (!result)
+		result = ERR_PTR(-ESTALE);
 	if (IS_ERR(result))
 		return result;
 
@@ -420,6 +422,8 @@ struct dentry *exportfs_decode_fh(struct vfsmount *mnt, struct fid *fid,
 
 		target_dir = nop->fh_to_parent(mnt->mnt_sb, fid,
 				fh_len, fileid_type);
+		if (!target_dir)
+			goto err_result;
 		err = PTR_ERR(target_dir);
 		if (IS_ERR(target_dir))
 			goto err_result;
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index d2003cdc36aa..db35cfdb3c8b 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -609,8 +609,8 @@ int ext4_has_free_blocks(struct ext4_sb_info *sbi, s64 nblocks)
 
 	if (free_blocks - (nblocks + root_blocks + dirty_blocks) <
 						EXT4_FREEBLOCKS_WATERMARK) {
-		free_blocks  = percpu_counter_sum(fbc);
-		dirty_blocks = percpu_counter_sum(dbc);
+		free_blocks  = percpu_counter_sum_positive(fbc);
+		dirty_blocks = percpu_counter_sum_positive(dbc);
 		if (dirty_blocks < 0) {
 			printk(KERN_CRIT "Dirty block accounting "
 					"went wrong %lld\n",
diff --git a/fs/fcntl.c b/fs/fcntl.c
index ac4f7db9f134..549daf8005fb 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -19,6 +19,7 @@
 #include <linux/signal.h>
 #include <linux/rcupdate.h>
 #include <linux/pid_namespace.h>
+#include <linux/smp_lock.h>
 
 #include <asm/poll.h>
 #include <asm/siginfo.h>
@@ -175,6 +176,11 @@ static int setfl(int fd, struct file * filp, unsigned long arg)
 	if (error)
 		return error;
 
+	/*
+	 * We still need a lock here for now to keep multiple FASYNC calls
+	 * from racing with each other.
+	 */
+	lock_kernel();
 	if ((arg ^ filp->f_flags) & FASYNC) {
 		if (filp->f_op && filp->f_op->fasync) {
 			error = filp->f_op->fasync(fd, filp, (arg & FASYNC) != 0);
@@ -185,6 +191,7 @@ static int setfl(int fd, struct file * filp, unsigned long arg)
 
 	filp->f_flags = (arg & SETFL_MASK) | (filp->f_flags & ~SETFL_MASK);
  out:
+	unlock_kernel();
 	return error;
 }
 
diff --git a/fs/inotify.c b/fs/inotify.c
index 7bbed1b89825..dae3f28f30d4 100644
--- a/fs/inotify.c
+++ b/fs/inotify.c
@@ -428,11 +428,13 @@ void inotify_unmount_inodes(struct list_head *list)
 		watches = &inode->inotify_watches;
 		list_for_each_entry_safe(watch, next_w, watches, i_list) {
 			struct inotify_handle *ih= watch->ih;
+			get_inotify_watch(watch);
 			mutex_lock(&ih->mutex);
 			ih->in_ops->handle_event(watch, watch->wd, IN_UNMOUNT, 0,
 						 NULL, NULL);
 			inotify_remove_watch_locked(ih, watch);
 			mutex_unlock(&ih->mutex);
+			put_inotify_watch(watch);
 		}
 		mutex_unlock(&inode->inotify_mutex);
 		iput(inode);		
diff --git a/fs/ioctl.c b/fs/ioctl.c
index d152856c371b..43e8b2c0664b 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -400,11 +400,9 @@ static int ioctl_fioasync(unsigned int fd, struct file *filp,
 
 	/* Did FASYNC state change ? */
 	if ((flag ^ filp->f_flags) & FASYNC) {
-		if (filp->f_op && filp->f_op->fasync) {
-			lock_kernel();
+		if (filp->f_op && filp->f_op->fasync)
 			error = filp->f_op->fasync(fd, filp, on);
-			unlock_kernel();
-		} else
+		else
 			error = -ENOTTY;
 	}
 	if (error)
@@ -440,11 +438,17 @@ int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
 		break;
 
 	case FIONBIO:
+		/* BKL needed to avoid races tweaking f_flags */
+		lock_kernel();
 		error = ioctl_fionbio(filp, argp);
+		unlock_kernel();
 		break;
 
 	case FIOASYNC:
+		/* BKL needed to avoid races tweaking f_flags */
+		lock_kernel();
 		error = ioctl_fioasync(fd, filp, argp);
+		unlock_kernel();
 		break;
 
 	case FIOQSIZE:
diff --git a/fs/lockd/host.c b/fs/lockd/host.c
index 9fd8889097b7..70fc63a1727b 100644
--- a/fs/lockd/host.c
+++ b/fs/lockd/host.c
@@ -167,7 +167,8 @@ static struct nlm_host *nlm_lookup_host(struct nlm_lookup_host_info *ni)
 			continue;
 		if (host->h_server != ni->server)
 			continue;
-		if (!nlm_cmp_addr(nlm_srcaddr(host), ni->src_sap))
+		if (ni->server &&
+		    !nlm_cmp_addr(nlm_srcaddr(host), ni->src_sap))
 			continue;
 
 		/* Move to head of hash chain. */
diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index c631a83931ce..56b076736b56 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -181,6 +181,7 @@ lockd(void *vrqstp)
 	}
 	flush_signals(current);
 	cancel_delayed_work_sync(&grace_period_end);
+	locks_end_grace(&lockd_manager);
 	if (nlmsvc_ops)
 		nlmsvc_invalidate_all();
 	nlm_shutdown_hosts();
diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c
index bb93946ace22..b79ec930d9f1 100644
--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -225,12 +225,12 @@ nfsd4_list_rec_dir(struct dentry *dir, recdir_func *f)
 		return 0;
 
 	nfs4_save_user(&uid, &gid);
+	INIT_LIST_HEAD(dentries);
 
 	filp = dentry_open(dget(dir), mntget(rec_dir.mnt), O_RDONLY);
 	status = PTR_ERR(filp);
 	if (IS_ERR(filp))
 		goto out;
-	INIT_LIST_HEAD(dentries);
 	status = vfs_readdir(filp, nfsd4_build_dentrylist, &dla);
 	fput(filp);
 	while (!list_empty(dentries)) {
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index b0bebc552a11..1a052ac2bde9 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -3261,6 +3261,7 @@ nfs4_state_shutdown(void)
 {
 	cancel_rearming_delayed_workqueue(laundry_wq, &laundromat_work);
 	destroy_workqueue(laundry_wq);
+	locks_end_grace(&nfsd4_manager);
 	nfs4_lock_state();
 	nfs4_release_reclaim();
 	__nfs4_state_shutdown();
diff --git a/fs/ntfs/debug.h b/fs/ntfs/debug.h
index 5e6724c1afd1..2142b1c68b61 100644
--- a/fs/ntfs/debug.h
+++ b/fs/ntfs/debug.h
@@ -30,7 +30,8 @@
 
 extern int debug_msgs;
 
-#if 0 /* Fool kernel-doc since it doesn't do macros yet */
+extern void __ntfs_debug(const char *file, int line, const char *function,
+	const char *format, ...) __attribute__ ((format (printf, 4, 5)));
 /**
  * ntfs_debug - write a debug level message to syslog
  * @f:		a printf format string containing the message
@@ -39,11 +40,6 @@ extern int debug_msgs;
  * ntfs_debug() writes a DEBUG level message to the syslog but only if the
  * driver was compiled with -DDEBUG. Otherwise, the call turns into a NOP.
  */
-static void ntfs_debug(const char *f, ...);
-#endif
-
-extern void __ntfs_debug (const char *file, int line, const char *function,
-	const char *format, ...) __attribute__ ((format (printf, 4, 5)));
 #define ntfs_debug(f, a...)						\
 	__ntfs_debug(__FILE__, __LINE__, __func__, f, ##a)
 
diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c
index 7e947c672469..3a178ec48d7c 100644
--- a/fs/ocfs2/buffer_head_io.c
+++ b/fs/ocfs2/buffer_head_io.c
@@ -112,7 +112,7 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block,
 		bh = bhs[i];
 
 		if (buffer_jbd(bh)) {
-			mlog(ML_ERROR,
+			mlog(ML_BH_IO,
 			     "trying to sync read a jbd "
 			     "managed bh (blocknr = %llu), skipping\n",
 			     (unsigned long long)bh->b_blocknr);
@@ -147,15 +147,10 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block,
 	for (i = nr; i > 0; i--) {
 		bh = bhs[i - 1];
 
-		if (buffer_jbd(bh)) {
-			mlog(ML_ERROR,
-			     "the journal got the buffer while it was "
-			     "locked for io! (blocknr = %llu)\n",
-			     (unsigned long long)bh->b_blocknr);
-			BUG();
-		}
+		/* No need to wait on the buffer if it's managed by JBD. */
+		if (!buffer_jbd(bh))
+			wait_on_buffer(bh);
 
-		wait_on_buffer(bh);
 		if (!buffer_uptodate(bh)) {
 			/* Status won't be cleared from here on out,
 			 * so we can safely record this and loop back
@@ -251,8 +246,6 @@ int ocfs2_read_blocks(struct inode *inode, u64 block, int nr,
 			ignore_cache = 1;
 		}
 
-		/* XXX: Can we ever get this and *not* have the cached
-		 * flag set? */
 		if (buffer_jbd(bh)) {
 			if (ignore_cache)
 				mlog(ML_BH_IO, "trying to sync read a jbd "
diff --git a/fs/ocfs2/dlm/dlmfs.c b/fs/ocfs2/dlm/dlmfs.c
index 533a789c3ef8..ba962d71b34d 100644
--- a/fs/ocfs2/dlm/dlmfs.c
+++ b/fs/ocfs2/dlm/dlmfs.c
@@ -608,8 +608,10 @@ static int __init init_dlmfs_fs(void)
 				0, (SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT|
 					SLAB_MEM_SPREAD),
 				dlmfs_init_once);
-	if (!dlmfs_inode_cache)
+	if (!dlmfs_inode_cache) {
+		status = -ENOMEM;
 		goto bail;
+	}
 	cleanup_inode = 1;
 
 	user_dlm_worker = create_singlethread_workqueue("user_dlm");
diff --git a/fs/ocfs2/dlm/userdlm.h b/fs/ocfs2/dlm/userdlm.h
index 39ec27738499..0c3cc03c61fa 100644
--- a/fs/ocfs2/dlm/userdlm.h
+++ b/fs/ocfs2/dlm/userdlm.h
@@ -33,7 +33,7 @@
 #include <linux/workqueue.h>
 
 /* user_lock_res->l_flags flags. */
-#define USER_LOCK_ATTACHED      (0x00000001) /* have we initialized
+#define USER_LOCK_ATTACHED      (0x00000001) /* we have initialized
 					       * the lvb */
 #define USER_LOCK_BUSY          (0x00000002) /* we are currently in
 					       * dlm_lock */
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index ec684426034b..6e6cc0a2e5f7 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -2841,9 +2841,8 @@ static void ocfs2_unlock_ast(void *opaque, int error)
 
 	lockres_clear_flags(lockres, OCFS2_LOCK_BUSY);
 	lockres->l_unlock_action = OCFS2_UNLOCK_INVALID;
-	spin_unlock_irqrestore(&lockres->l_lock, flags);
-
 	wake_up(&lockres->l_event);
+	spin_unlock_irqrestore(&lockres->l_lock, flags);
 
 	mlog_exit_void();
 }
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index fef7ece32376..3fed9e3d8992 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -85,7 +85,7 @@ enum ocfs2_unlock_action {
 };
 
 /* ocfs2_lock_res->l_flags flags. */
-#define OCFS2_LOCK_ATTACHED      (0x00000001) /* have we initialized
+#define OCFS2_LOCK_ATTACHED      (0x00000001) /* we have initialized
 					       * the lvb */
 #define OCFS2_LOCK_BUSY          (0x00000002) /* we are currently in
 					       * dlm_lock */
diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c
index faec2d879357..9b76d41a8ac6 100644
--- a/fs/ocfs2/stack_user.c
+++ b/fs/ocfs2/stack_user.c
@@ -740,6 +740,9 @@ static int user_dlm_lock_status(union ocfs2_dlm_lksb *lksb)
 
 static void *user_dlm_lvb(union ocfs2_dlm_lksb *lksb)
 {
+	if (!lksb->lksb_fsdlm.sb_lvbptr)
+		lksb->lksb_fsdlm.sb_lvbptr = (char *)lksb +
+					     sizeof(struct dlm_lksb);
 	return (void *)(lksb->lksb_fsdlm.sb_lvbptr);
 }
 
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 486cf3fe7139..d4677603c889 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -371,7 +371,7 @@ static int lstats_show_proc(struct seq_file *m, void *v)
 				task->latency_record[i].time,
 				task->latency_record[i].max);
 			for (q = 0; q < LT_BACKTRACEDEPTH; q++) {
-				char sym[KSYM_NAME_LEN];
+				char sym[KSYM_SYMBOL_LEN];
 				char *c;
 				if (!task->latency_record[i].backtrace[q])
 					break;
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index b770c095e45c..3a8bdd7f5756 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -557,9 +557,9 @@ static u64 swap_pte_to_pagemap_entry(pte_t pte)
 	return swp_type(e) | (swp_offset(e) << MAX_SWAPFILES_SHIFT);
 }
 
-static unsigned long pte_to_pagemap_entry(pte_t pte)
+static u64 pte_to_pagemap_entry(pte_t pte)
 {
-	unsigned long pme = 0;
+	u64 pme = 0;
 	if (is_swap_pte(pte))
 		pme = PM_PFRAME(swap_pte_to_pagemap_entry(pte))
 			| PM_PSHIFT(PAGE_SHIFT) | PM_SWAP;
diff --git a/fs/ubifs/commit.c b/fs/ubifs/commit.c
index 0a6aa2cc78f0..b49884c8c10e 100644
--- a/fs/ubifs/commit.c
+++ b/fs/ubifs/commit.c
@@ -234,8 +234,8 @@ int ubifs_bg_thread(void *info)
 	int err;
 	struct ubifs_info *c = info;
 
-	ubifs_msg("background thread \"%s\" started, PID %d",
-		  c->bgt_name, current->pid);
+	dbg_msg("background thread \"%s\" started, PID %d",
+		c->bgt_name, current->pid);
 	set_freezable();
 
 	while (1) {
diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c
index 7186400750e7..510ffa0bbda4 100644
--- a/fs/ubifs/debug.c
+++ b/fs/ubifs/debug.c
@@ -101,21 +101,24 @@ static void sprintf_key(const struct ubifs_info *c, const union ubifs_key *key,
 	if (c->key_fmt == UBIFS_SIMPLE_KEY_FMT) {
 		switch (type) {
 		case UBIFS_INO_KEY:
-			sprintf(p, "(%lu, %s)", key_inum(c, key),
+			sprintf(p, "(%lu, %s)", (unsigned long)key_inum(c, key),
 			       get_key_type(type));
 			break;
 		case UBIFS_DENT_KEY:
 		case UBIFS_XENT_KEY:
-			sprintf(p, "(%lu, %s, %#08x)", key_inum(c, key),
+			sprintf(p, "(%lu, %s, %#08x)",
+				(unsigned long)key_inum(c, key),
 				get_key_type(type), key_hash(c, key));
 			break;
 		case UBIFS_DATA_KEY:
-			sprintf(p, "(%lu, %s, %u)", key_inum(c, key),
+			sprintf(p, "(%lu, %s, %u)",
+				(unsigned long)key_inum(c, key),
 				get_key_type(type), key_block(c, key));
 			break;
 		case UBIFS_TRUN_KEY:
 			sprintf(p, "(%lu, %s)",
-				key_inum(c, key), get_key_type(type));
+				(unsigned long)key_inum(c, key),
+				get_key_type(type));
 			break;
 		default:
 			sprintf(p, "(bad key type: %#08x, %#08x)",
@@ -364,8 +367,8 @@ void dbg_dump_node(const struct ubifs_info *c, const void *node)
 		       le32_to_cpu(mst->ihead_lnum));
 		printk(KERN_DEBUG "\tihead_offs     %u\n",
 		       le32_to_cpu(mst->ihead_offs));
-		printk(KERN_DEBUG "\tindex_size     %u\n",
-		       le32_to_cpu(mst->index_size));
+		printk(KERN_DEBUG "\tindex_size     %llu\n",
+		       (unsigned long long)le64_to_cpu(mst->index_size));
 		printk(KERN_DEBUG "\tlpt_lnum       %u\n",
 		       le32_to_cpu(mst->lpt_lnum));
 		printk(KERN_DEBUG "\tlpt_offs       %u\n",
@@ -1589,7 +1592,7 @@ static struct fsck_inode *add_inode(struct ubifs_info *c,
 
 	if (inum > c->highest_inum) {
 		ubifs_err("too high inode number, max. is %lu",
-			  c->highest_inum);
+			  (unsigned long)c->highest_inum);
 		return ERR_PTR(-EINVAL);
 	}
 
@@ -1668,16 +1671,18 @@ static struct fsck_inode *read_add_inode(struct ubifs_info *c,
 	ino_key_init(c, &key, inum);
 	err = ubifs_lookup_level0(c, &key, &znode, &n);
 	if (!err) {
-		ubifs_err("inode %lu not found in index", inum);
+		ubifs_err("inode %lu not found in index", (unsigned long)inum);
 		return ERR_PTR(-ENOENT);
 	} else if (err < 0) {
-		ubifs_err("error %d while looking up inode %lu", err, inum);
+		ubifs_err("error %d while looking up inode %lu",
+			  err, (unsigned long)inum);
 		return ERR_PTR(err);
 	}
 
 	zbr = &znode->zbranch[n];
 	if (zbr->len < UBIFS_INO_NODE_SZ) {
-		ubifs_err("bad node %lu node length %d", inum, zbr->len);
+		ubifs_err("bad node %lu node length %d",
+			  (unsigned long)inum, zbr->len);
 		return ERR_PTR(-EINVAL);
 	}
 
@@ -1697,7 +1702,7 @@ static struct fsck_inode *read_add_inode(struct ubifs_info *c,
 	kfree(ino);
 	if (IS_ERR(fscki)) {
 		ubifs_err("error %ld while adding inode %lu node",
-			  PTR_ERR(fscki), inum);
+			  PTR_ERR(fscki), (unsigned long)inum);
 		return fscki;
 	}
 
@@ -1786,7 +1791,8 @@ static int check_leaf(struct ubifs_info *c, struct ubifs_zbranch *zbr,
 		if (IS_ERR(fscki)) {
 			err = PTR_ERR(fscki);
 			ubifs_err("error %d while processing data node and "
-				  "trying to find inode node %lu", err, inum);
+				  "trying to find inode node %lu",
+				  err, (unsigned long)inum);
 			goto out_dump;
 		}
 
@@ -1819,7 +1825,8 @@ static int check_leaf(struct ubifs_info *c, struct ubifs_zbranch *zbr,
 		if (IS_ERR(fscki)) {
 			err = PTR_ERR(fscki);
 			ubifs_err("error %d while processing entry node and "
-				  "trying to find inode node %lu", err, inum);
+				  "trying to find inode node %lu",
+				  err, (unsigned long)inum);
 			goto out_dump;
 		}
 
@@ -1832,7 +1839,7 @@ static int check_leaf(struct ubifs_info *c, struct ubifs_zbranch *zbr,
 			err = PTR_ERR(fscki);
 			ubifs_err("error %d while processing entry node and "
 				  "trying to find parent inode node %lu",
-				  err, inum);
+				  err, (unsigned long)inum);
 			goto out_dump;
 		}
 
@@ -1923,7 +1930,8 @@ static int check_inodes(struct ubifs_info *c, struct fsck_data *fsckd)
 			    fscki->references != 1) {
 				ubifs_err("directory inode %lu has %d "
 					  "direntries which refer it, but "
-					  "should be 1", fscki->inum,
+					  "should be 1",
+					  (unsigned long)fscki->inum,
 					  fscki->references);
 				goto out_dump;
 			}
@@ -1931,27 +1939,29 @@ static int check_inodes(struct ubifs_info *c, struct fsck_data *fsckd)
 			    fscki->references != 0) {
 				ubifs_err("root inode %lu has non-zero (%d) "
 					  "direntries which refer it",
-					  fscki->inum, fscki->references);
+					  (unsigned long)fscki->inum,
+					  fscki->references);
 				goto out_dump;
 			}
 			if (fscki->calc_sz != fscki->size) {
 				ubifs_err("directory inode %lu size is %lld, "
 					  "but calculated size is %lld",
-					  fscki->inum, fscki->size,
-					  fscki->calc_sz);
+					  (unsigned long)fscki->inum,
+					  fscki->size, fscki->calc_sz);
 				goto out_dump;
 			}
 			if (fscki->calc_cnt != fscki->nlink) {
 				ubifs_err("directory inode %lu nlink is %d, "
 					  "but calculated nlink is %d",
-					  fscki->inum, fscki->nlink,
-					  fscki->calc_cnt);
+					  (unsigned long)fscki->inum,
+					  fscki->nlink, fscki->calc_cnt);
 				goto out_dump;
 			}
 		} else {
 			if (fscki->references != fscki->nlink) {
 				ubifs_err("inode %lu nlink is %d, but "
-					  "calculated nlink is %d", fscki->inum,
+					  "calculated nlink is %d",
+					  (unsigned long)fscki->inum,
 					  fscki->nlink, fscki->references);
 				goto out_dump;
 			}
@@ -1959,20 +1969,21 @@ static int check_inodes(struct ubifs_info *c, struct fsck_data *fsckd)
 		if (fscki->xattr_sz != fscki->calc_xsz) {
 			ubifs_err("inode %lu has xattr size %u, but "
 				  "calculated size is %lld",
-				  fscki->inum, fscki->xattr_sz,
+				  (unsigned long)fscki->inum, fscki->xattr_sz,
 				  fscki->calc_xsz);
 			goto out_dump;
 		}
 		if (fscki->xattr_cnt != fscki->calc_xcnt) {
 			ubifs_err("inode %lu has %u xattrs, but "
-				  "calculated count is %lld", fscki->inum,
+				  "calculated count is %lld",
+				  (unsigned long)fscki->inum,
 				  fscki->xattr_cnt, fscki->calc_xcnt);
 			goto out_dump;
 		}
 		if (fscki->xattr_nms != fscki->calc_xnms) {
 			ubifs_err("inode %lu has xattr names' size %u, but "
 				  "calculated names' size is %lld",
-				  fscki->inum, fscki->xattr_nms,
+				  (unsigned long)fscki->inum, fscki->xattr_nms,
 				  fscki->calc_xnms);
 			goto out_dump;
 		}
@@ -1985,11 +1996,12 @@ out_dump:
 	ino_key_init(c, &key, fscki->inum);
 	err = ubifs_lookup_level0(c, &key, &znode, &n);
 	if (!err) {
-		ubifs_err("inode %lu not found in index", fscki->inum);
+		ubifs_err("inode %lu not found in index",
+			  (unsigned long)fscki->inum);
 		return -ENOENT;
 	} else if (err < 0) {
 		ubifs_err("error %d while looking up inode %lu",
-			  err, fscki->inum);
+			  err, (unsigned long)fscki->inum);
 		return err;
 	}
 
@@ -2007,7 +2019,7 @@ out_dump:
 	}
 
 	ubifs_msg("dump of the inode %lu sitting in LEB %d:%d",
-		  fscki->inum, zbr->lnum, zbr->offs);
+		  (unsigned long)fscki->inum, zbr->lnum, zbr->offs);
 	dbg_dump_node(c, ino);
 	kfree(ino);
 	return -EINVAL;
diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c
index 526c01ec8003..0422c98e1793 100644
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -161,7 +161,7 @@ struct inode *ubifs_new_inode(struct ubifs_info *c, const struct inode *dir,
 			return ERR_PTR(-EINVAL);
 		}
 		ubifs_warn("running out of inode numbers (current %lu, max %d)",
-			   c->highest_inum, INUM_WATERMARK);
+			   (unsigned long)c->highest_inum, INUM_WATERMARK);
 	}
 
 	inode->i_ino = ++c->highest_inum;
@@ -428,7 +428,8 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir)
 		dbg_gen("feed '%s', ino %llu, new f_pos %#x",
 			dent->name, (unsigned long long)le64_to_cpu(dent->inum),
 			key_hash_flash(c, &dent->key));
-		ubifs_assert(dent->ch.sqnum > ubifs_inode(dir)->creat_sqnum);
+		ubifs_assert(le64_to_cpu(dent->ch.sqnum) >
+			     ubifs_inode(dir)->creat_sqnum);
 
 		nm.len = le16_to_cpu(dent->nlen);
 		over = filldir(dirent, dent->name, nm.len, file->f_pos,
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index 51cf511d44d9..2624411d9758 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -72,7 +72,7 @@ static int read_block(struct inode *inode, void *addr, unsigned int block,
 		return err;
 	}
 
-	ubifs_assert(dn->ch.sqnum > ubifs_inode(inode)->creat_sqnum);
+	ubifs_assert(le64_to_cpu(dn->ch.sqnum) > ubifs_inode(inode)->creat_sqnum);
 
 	len = le32_to_cpu(dn->size);
 	if (len <= 0 || len > UBIFS_BLOCK_SIZE)
@@ -626,7 +626,7 @@ static int populate_page(struct ubifs_info *c, struct page *page,
 
 			dn = bu->buf + (bu->zbranch[nn].offs - offs);
 
-			ubifs_assert(dn->ch.sqnum >
+			ubifs_assert(le64_to_cpu(dn->ch.sqnum) >
 				     ubifs_inode(inode)->creat_sqnum);
 
 			len = le32_to_cpu(dn->size);
@@ -691,32 +691,22 @@ out_err:
 /**
  * ubifs_do_bulk_read - do bulk-read.
  * @c: UBIFS file-system description object
- * @page1: first page
+ * @bu: bulk-read information
+ * @page1: first page to read
  *
  * This function returns %1 if the bulk-read is done, otherwise %0 is returned.
  */
-static int ubifs_do_bulk_read(struct ubifs_info *c, struct page *page1)
+static int ubifs_do_bulk_read(struct ubifs_info *c, struct bu_info *bu,
+			      struct page *page1)
 {
 	pgoff_t offset = page1->index, end_index;
 	struct address_space *mapping = page1->mapping;
 	struct inode *inode = mapping->host;
 	struct ubifs_inode *ui = ubifs_inode(inode);
-	struct bu_info *bu;
 	int err, page_idx, page_cnt, ret = 0, n = 0;
+	int allocate = bu->buf ? 0 : 1;
 	loff_t isize;
 
-	bu = kmalloc(sizeof(struct bu_info), GFP_NOFS);
-	if (!bu)
-		return 0;
-
-	bu->buf_len = c->bulk_read_buf_size;
-	bu->buf = kmalloc(bu->buf_len, GFP_NOFS);
-	if (!bu->buf)
-		goto out_free;
-
-	data_key_init(c, &bu->key, inode->i_ino,
-		      offset << UBIFS_BLOCKS_PER_PAGE_SHIFT);
-
 	err = ubifs_tnc_get_bu_keys(c, bu);
 	if (err)
 		goto out_warn;
@@ -735,12 +725,25 @@ static int ubifs_do_bulk_read(struct ubifs_info *c, struct page *page1)
 		 * together. If all the pages were like this, bulk-read would
 		 * reduce performance, so we turn it off for a while.
 		 */
-		ui->read_in_a_row = 0;
-		ui->bulk_read = 0;
-		goto out_free;
+		goto out_bu_off;
 	}
 
 	if (bu->cnt) {
+		if (allocate) {
+			/*
+			 * Allocate bulk-read buffer depending on how many data
+			 * nodes we are going to read.
+			 */
+			bu->buf_len = bu->zbranch[bu->cnt - 1].offs +
+				      bu->zbranch[bu->cnt - 1].len -
+				      bu->zbranch[0].offs;
+			ubifs_assert(bu->buf_len > 0);
+			ubifs_assert(bu->buf_len <= c->leb_size);
+			bu->buf = kmalloc(bu->buf_len, GFP_NOFS | __GFP_NOWARN);
+			if (!bu->buf)
+				goto out_bu_off;
+		}
+
 		err = ubifs_tnc_bulk_read(c, bu);
 		if (err)
 			goto out_warn;
@@ -779,13 +782,17 @@ static int ubifs_do_bulk_read(struct ubifs_info *c, struct page *page1)
 	ui->last_page_read = offset + page_idx - 1;
 
 out_free:
-	kfree(bu->buf);
-	kfree(bu);
+	if (allocate)
+		kfree(bu->buf);
 	return ret;
 
 out_warn:
 	ubifs_warn("ignoring error %d and skipping bulk-read", err);
 	goto out_free;
+
+out_bu_off:
+	ui->read_in_a_row = ui->bulk_read = 0;
+	goto out_free;
 }
 
 /**
@@ -803,18 +810,20 @@ static int ubifs_bulk_read(struct page *page)
 	struct ubifs_info *c = inode->i_sb->s_fs_info;
 	struct ubifs_inode *ui = ubifs_inode(inode);
 	pgoff_t index = page->index, last_page_read = ui->last_page_read;
-	int ret = 0;
+	struct bu_info *bu;
+	int err = 0, allocated = 0;
 
 	ui->last_page_read = index;
-
 	if (!c->bulk_read)
 		return 0;
+
 	/*
-	 * Bulk-read is protected by ui_mutex, but it is an optimization, so
-	 * don't bother if we cannot lock the mutex.
+	 * Bulk-read is protected by @ui->ui_mutex, but it is an optimization,
+	 * so don't bother if we cannot lock the mutex.
 	 */
 	if (!mutex_trylock(&ui->ui_mutex))
 		return 0;
+
 	if (index != last_page_read + 1) {
 		/* Turn off bulk-read if we stop reading sequentially */
 		ui->read_in_a_row = 1;
@@ -822,6 +831,7 @@ static int ubifs_bulk_read(struct page *page)
 			ui->bulk_read = 0;
 		goto out_unlock;
 	}
+
 	if (!ui->bulk_read) {
 		ui->read_in_a_row += 1;
 		if (ui->read_in_a_row < 3)
@@ -829,10 +839,35 @@ static int ubifs_bulk_read(struct page *page)
 		/* Three reads in a row, so switch on bulk-read */
 		ui->bulk_read = 1;
 	}
-	ret = ubifs_do_bulk_read(c, page);
+
+	/*
+	 * If possible, try to use pre-allocated bulk-read information, which
+	 * is protected by @c->bu_mutex.
+	 */
+	if (mutex_trylock(&c->bu_mutex))
+		bu = &c->bu;
+	else {
+		bu = kmalloc(sizeof(struct bu_info), GFP_NOFS | __GFP_NOWARN);
+		if (!bu)
+			goto out_unlock;
+
+		bu->buf = NULL;
+		allocated = 1;
+	}
+
+	bu->buf_len = c->max_bu_buf_len;
+	data_key_init(c, &bu->key, inode->i_ino,
+		      page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT);
+	err = ubifs_do_bulk_read(c, bu, page);
+
+	if (!allocated)
+		mutex_unlock(&c->bu_mutex);
+	else
+		kfree(bu);
+
 out_unlock:
 	mutex_unlock(&ui->ui_mutex);
-	return ret;
+	return err;
 }
 
 static int ubifs_readpage(struct file *file, struct page *page)
diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c
index 22993f867d19..f91b745908ea 100644
--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -690,8 +690,9 @@ int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode,
 	int dlen = UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE * WORST_COMPR_FACTOR;
 	struct ubifs_inode *ui = ubifs_inode(inode);
 
-	dbg_jnl("ino %lu, blk %u, len %d, key %s", key_inum(c, key),
-		key_block(c, key), len, DBGKEY(key));
+	dbg_jnl("ino %lu, blk %u, len %d, key %s",
+		(unsigned long)key_inum(c, key), key_block(c, key), len,
+		DBGKEY(key));
 	ubifs_assert(len <= UBIFS_BLOCK_SIZE);
 
 	data = kmalloc(dlen, GFP_NOFS);
@@ -1128,7 +1129,8 @@ int ubifs_jnl_truncate(struct ubifs_info *c, const struct inode *inode,
 	ino_t inum = inode->i_ino;
 	unsigned int blk;
 
-	dbg_jnl("ino %lu, size %lld -> %lld", inum, old_size, new_size);
+	dbg_jnl("ino %lu, size %lld -> %lld",
+		(unsigned long)inum, old_size, new_size);
 	ubifs_assert(!ui->data_len);
 	ubifs_assert(S_ISREG(inode->i_mode));
 	ubifs_assert(mutex_is_locked(&ui->ui_mutex));
diff --git a/fs/ubifs/key.h b/fs/ubifs/key.h
index 9ee65086f627..3f1f16bc25c9 100644
--- a/fs/ubifs/key.h
+++ b/fs/ubifs/key.h
@@ -345,7 +345,7 @@ static inline int key_type_flash(const struct ubifs_info *c, const void *k)
 {
 	const union ubifs_key *key = k;
 
-	return le32_to_cpu(key->u32[1]) >> UBIFS_S_KEY_BLOCK_BITS;
+	return le32_to_cpu(key->j32[1]) >> UBIFS_S_KEY_BLOCK_BITS;
 }
 
 /**
@@ -416,7 +416,7 @@ static inline unsigned int key_block_flash(const struct ubifs_info *c,
 {
 	const union ubifs_key *key = k;
 
-	return le32_to_cpu(key->u32[1]) & UBIFS_S_KEY_BLOCK_MASK;
+	return le32_to_cpu(key->j32[1]) & UBIFS_S_KEY_BLOCK_MASK;
 }
 
 /**
diff --git a/fs/ubifs/lpt_commit.c b/fs/ubifs/lpt_commit.c
index eed5a0025d63..a41434b42785 100644
--- a/fs/ubifs/lpt_commit.c
+++ b/fs/ubifs/lpt_commit.c
@@ -571,8 +571,6 @@ static struct ubifs_pnode *next_pnode(struct ubifs_info *c,
 		/* We assume here that LEB zero is never an LPT LEB */
 		if (nnode->nbranch[iip].lnum)
 			return ubifs_get_pnode(c, nnode, iip);
-		else
-			return NULL;
 	}
 
 	/* Go up while can't go right */
diff --git a/fs/ubifs/orphan.c b/fs/ubifs/orphan.c
index 02d3462f4d3e..9bd5a43d4526 100644
--- a/fs/ubifs/orphan.c
+++ b/fs/ubifs/orphan.c
@@ -105,7 +105,7 @@ int ubifs_add_orphan(struct ubifs_info *c, ino_t inum)
 	list_add_tail(&orphan->list, &c->orph_list);
 	list_add_tail(&orphan->new_list, &c->orph_new);
 	spin_unlock(&c->orphan_lock);
-	dbg_gen("ino %lu", inum);
+	dbg_gen("ino %lu", (unsigned long)inum);
 	return 0;
 }
 
@@ -132,14 +132,16 @@ void ubifs_delete_orphan(struct ubifs_info *c, ino_t inum)
 		else {
 			if (o->dnext) {
 				spin_unlock(&c->orphan_lock);
-				dbg_gen("deleted twice ino %lu", inum);
+				dbg_gen("deleted twice ino %lu",
+					(unsigned long)inum);
 				return;
 			}
 			if (o->cnext) {
 				o->dnext = c->orph_dnext;
 				c->orph_dnext = o;
 				spin_unlock(&c->orphan_lock);
-				dbg_gen("delete later ino %lu", inum);
+				dbg_gen("delete later ino %lu",
+					(unsigned long)inum);
 				return;
 			}
 			rb_erase(p, &c->orph_tree);
@@ -151,12 +153,12 @@ void ubifs_delete_orphan(struct ubifs_info *c, ino_t inum)
 			}
 			spin_unlock(&c->orphan_lock);
 			kfree(o);
-			dbg_gen("inum %lu", inum);
+			dbg_gen("inum %lu", (unsigned long)inum);
 			return;
 		}
 	}
 	spin_unlock(&c->orphan_lock);
-	dbg_err("missing orphan ino %lu", inum);
+	dbg_err("missing orphan ino %lu", (unsigned long)inum);
 	dbg_dump_stack();
 }
 
@@ -448,7 +450,7 @@ static void erase_deleted(struct ubifs_info *c)
 		rb_erase(&orphan->rb, &c->orph_tree);
 		list_del(&orphan->list);
 		c->tot_orphans -= 1;
-		dbg_gen("deleting orphan ino %lu", orphan->inum);
+		dbg_gen("deleting orphan ino %lu", (unsigned long)orphan->inum);
 		kfree(orphan);
 	}
 	c->orph_dnext = NULL;
@@ -536,8 +538,8 @@ static int insert_dead_orphan(struct ubifs_info *c, ino_t inum)
 	list_add_tail(&orphan->list, &c->orph_list);
 	orphan->dnext = c->orph_dnext;
 	c->orph_dnext = orphan;
-	dbg_mnt("ino %lu, new %d, tot %d",
-		inum, c->new_orphans, c->tot_orphans);
+	dbg_mnt("ino %lu, new %d, tot %d", (unsigned long)inum,
+		c->new_orphans, c->tot_orphans);
 	return 0;
 }
 
@@ -609,7 +611,8 @@ static int do_kill_orphans(struct ubifs_info *c, struct ubifs_scan_leb *sleb,
 		n = (le32_to_cpu(orph->ch.len) - UBIFS_ORPH_NODE_SZ) >> 3;
 		for (i = 0; i < n; i++) {
 			inum = le64_to_cpu(orph->inos[i]);
-			dbg_rcvry("deleting orphaned inode %lu", inum);
+			dbg_rcvry("deleting orphaned inode %lu",
+				  (unsigned long)inum);
 			err = ubifs_tnc_remove_ino(c, inum);
 			if (err)
 				return err;
@@ -840,8 +843,8 @@ static int dbg_orphan_check(struct ubifs_info *c, struct ubifs_zbranch *zbr,
 	if (inum != ci->last_ino) {
 		/* Lowest node type is the inode node, so it comes first */
 		if (key_type(c, &zbr->key) != UBIFS_INO_KEY)
-			ubifs_err("found orphan node ino %lu, type %d", inum,
-				  key_type(c, &zbr->key));
+			ubifs_err("found orphan node ino %lu, type %d",
+				  (unsigned long)inum, key_type(c, &zbr->key));
 		ci->last_ino = inum;
 		ci->tot_inos += 1;
 		err = ubifs_tnc_read_node(c, zbr, ci->node);
@@ -853,7 +856,8 @@ static int dbg_orphan_check(struct ubifs_info *c, struct ubifs_zbranch *zbr,
 			/* Must be recorded as an orphan */
 			if (!dbg_find_check_orphan(&ci->root, inum) &&
 			    !dbg_find_orphan(c, inum)) {
-				ubifs_err("missing orphan, ino %lu", inum);
+				ubifs_err("missing orphan, ino %lu",
+					  (unsigned long)inum);
 				ci->missing += 1;
 			}
 	}
diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c
index 77d26c141cf6..90acac603e63 100644
--- a/fs/ubifs/recovery.c
+++ b/fs/ubifs/recovery.c
@@ -168,12 +168,12 @@ static int write_rcvrd_mst_node(struct ubifs_info *c,
 				struct ubifs_mst_node *mst)
 {
 	int err = 0, lnum = UBIFS_MST_LNUM, sz = c->mst_node_alsz;
-	uint32_t save_flags;
+	__le32 save_flags;
 
 	dbg_rcvry("recovery");
 
 	save_flags = mst->flags;
-	mst->flags = cpu_to_le32(le32_to_cpu(mst->flags) | UBIFS_MST_RCVRY);
+	mst->flags |= cpu_to_le32(UBIFS_MST_RCVRY);
 
 	ubifs_prepare_node(c, mst, UBIFS_MST_NODE_SZ, 1);
 	err = ubi_leb_change(c->ubi, lnum, mst, sz, UBI_SHORTTERM);
@@ -1435,13 +1435,13 @@ static int fix_size_in_place(struct ubifs_info *c, struct size_entry *e)
 	err = ubi_leb_change(c->ubi, lnum, c->sbuf, len, UBI_UNKNOWN);
 	if (err)
 		goto out;
-	dbg_rcvry("inode %lu at %d:%d size %lld -> %lld ", e->inum, lnum, offs,
-		  i_size, e->d_size);
+	dbg_rcvry("inode %lu at %d:%d size %lld -> %lld ",
+		  (unsigned long)e->inum, lnum, offs, i_size, e->d_size);
 	return 0;
 
 out:
 	ubifs_warn("inode %lu failed to fix size %lld -> %lld error %d",
-		   e->inum, e->i_size, e->d_size, err);
+		   (unsigned long)e->inum, e->i_size, e->d_size, err);
 	return err;
 }
 
@@ -1472,7 +1472,8 @@ int ubifs_recover_size(struct ubifs_info *c)
 				return err;
 			if (err == -ENOENT) {
 				/* Remove data nodes that have no inode */
-				dbg_rcvry("removing ino %lu", e->inum);
+				dbg_rcvry("removing ino %lu",
+					  (unsigned long)e->inum);
 				err = ubifs_tnc_remove_ino(c, e->inum);
 				if (err)
 					return err;
@@ -1493,8 +1494,8 @@ int ubifs_recover_size(struct ubifs_info *c)
 					return PTR_ERR(inode);
 				if (inode->i_size < e->d_size) {
 					dbg_rcvry("ino %lu size %lld -> %lld",
-						  e->inum, e->d_size,
-						  inode->i_size);
+						  (unsigned long)e->inum,
+						  e->d_size, inode->i_size);
 					inode->i_size = e->d_size;
 					ubifs_inode(inode)->ui_size = e->d_size;
 					e->inode = inode;
diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c
index 7399692af859..21f7d047c306 100644
--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -1065,7 +1065,7 @@ int ubifs_replay_journal(struct ubifs_info *c)
 	ubifs_assert(c->bud_bytes <= c->max_bud_bytes || c->need_recovery);
 	dbg_mnt("finished, log head LEB %d:%d, max_sqnum %llu, "
 		"highest_inum %lu", c->lhead_lnum, c->lhead_offs, c->max_sqnum,
-		c->highest_inum);
+		(unsigned long)c->highest_inum);
 out:
 	destroy_replay_tree(c);
 	destroy_bud_list(c);
diff --git a/fs/ubifs/sb.c b/fs/ubifs/sb.c
index 2bf753b38889..0f392351dc5a 100644
--- a/fs/ubifs/sb.c
+++ b/fs/ubifs/sb.c
@@ -81,6 +81,7 @@ static int create_default_filesystem(struct ubifs_info *c)
 	int lpt_lebs, lpt_first, orph_lebs, big_lpt, ino_waste, sup_flags = 0;
 	int min_leb_cnt = UBIFS_MIN_LEB_CNT;
 	uint64_t tmp64, main_bytes;
+	__le64 tmp_le64;
 
 	/* Some functions called from here depend on the @c->key_len filed */
 	c->key_len = UBIFS_SK_LEN;
@@ -295,10 +296,10 @@ static int create_default_filesystem(struct ubifs_info *c)
 	ino->ch.node_type = UBIFS_INO_NODE;
 	ino->creat_sqnum = cpu_to_le64(++c->max_sqnum);
 	ino->nlink = cpu_to_le32(2);
-	tmp = cpu_to_le64(CURRENT_TIME_SEC.tv_sec);
-	ino->atime_sec   = tmp;
-	ino->ctime_sec   = tmp;
-	ino->mtime_sec   = tmp;
+	tmp_le64 = cpu_to_le64(CURRENT_TIME_SEC.tv_sec);
+	ino->atime_sec   = tmp_le64;
+	ino->ctime_sec   = tmp_le64;
+	ino->mtime_sec   = tmp_le64;
 	ino->atime_nsec  = 0;
 	ino->ctime_nsec  = 0;
 	ino->mtime_nsec  = 0;
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 8780efbf40ac..d80b2aef42b6 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -36,6 +36,12 @@
 #include <linux/mount.h>
 #include "ubifs.h"
 
+/*
+ * Maximum amount of memory we may 'kmalloc()' without worrying that we are
+ * allocating too much.
+ */
+#define UBIFS_KMALLOC_OK (128*1024)
+
 /* Slab cache for UBIFS inodes */
 struct kmem_cache *ubifs_inode_slab;
 
@@ -561,18 +567,11 @@ static int init_constants_early(struct ubifs_info *c)
 	 * calculations when reporting free space.
 	 */
 	c->leb_overhead = c->leb_size % UBIFS_MAX_DATA_NODE_SZ;
-	/* Buffer size for bulk-reads */
-	c->bulk_read_buf_size = UBIFS_MAX_BULK_READ * UBIFS_MAX_DATA_NODE_SZ;
-	if (c->bulk_read_buf_size > c->leb_size)
-		c->bulk_read_buf_size = c->leb_size;
-	if (c->bulk_read_buf_size > 128 * 1024) {
-		/* Check if we can kmalloc more than 128KiB */
-		void *try = kmalloc(c->bulk_read_buf_size, GFP_KERNEL);
 
-		kfree(try);
-		if (!try)
-			c->bulk_read_buf_size = 128 * 1024;
-	}
+	/* Buffer size for bulk-reads */
+	c->max_bu_buf_len = UBIFS_MAX_BULK_READ * UBIFS_MAX_DATA_NODE_SZ;
+	if (c->max_bu_buf_len > c->leb_size)
+		c->max_bu_buf_len = c->leb_size;
 	return 0;
 }
 
@@ -992,6 +991,34 @@ static void destroy_journal(struct ubifs_info *c)
 }
 
 /**
+ * bu_init - initialize bulk-read information.
+ * @c: UBIFS file-system description object
+ */
+static void bu_init(struct ubifs_info *c)
+{
+	ubifs_assert(c->bulk_read == 1);
+
+	if (c->bu.buf)
+		return; /* Already initialized */
+
+again:
+	c->bu.buf = kmalloc(c->max_bu_buf_len, GFP_KERNEL | __GFP_NOWARN);
+	if (!c->bu.buf) {
+		if (c->max_bu_buf_len > UBIFS_KMALLOC_OK) {
+			c->max_bu_buf_len = UBIFS_KMALLOC_OK;
+			goto again;
+		}
+
+		/* Just disable bulk-read */
+		ubifs_warn("Cannot allocate %d bytes of memory for bulk-read, "
+			   "disabling it", c->max_bu_buf_len);
+		c->mount_opts.bulk_read = 1;
+		c->bulk_read = 0;
+		return;
+	}
+}
+
+/**
  * mount_ubifs - mount UBIFS file-system.
  * @c: UBIFS file-system description object
  *
@@ -1059,6 +1086,13 @@ static int mount_ubifs(struct ubifs_info *c)
 			goto out_free;
 	}
 
+	if (c->bulk_read == 1)
+		bu_init(c);
+
+	/*
+	 * We have to check all CRCs, even for data nodes, when we mount the FS
+	 * (specifically, when we are replaying).
+	 */
 	c->always_chk_crc = 1;
 
 	err = ubifs_read_superblock(c);
@@ -1289,6 +1323,7 @@ out_cbuf:
 out_dereg:
 	dbg_failure_mode_deregistration(c);
 out_free:
+	kfree(c->bu.buf);
 	vfree(c->ileb_buf);
 	vfree(c->sbuf);
 	kfree(c->bottom_up_buf);
@@ -1325,10 +1360,11 @@ static void ubifs_umount(struct ubifs_info *c)
 	kfree(c->cbuf);
 	kfree(c->rcvrd_mst_node);
 	kfree(c->mst_node);
+	kfree(c->bu.buf);
+	vfree(c->ileb_buf);
 	vfree(c->sbuf);
 	kfree(c->bottom_up_buf);
 	UBIFS_DBG(vfree(c->dbg_buf));
-	vfree(c->ileb_buf);
 	dbg_failure_mode_deregistration(c);
 }
 
@@ -1626,6 +1662,7 @@ static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data)
 		ubifs_err("invalid or unknown remount parameter");
 		return err;
 	}
+
 	if ((sb->s_flags & MS_RDONLY) && !(*flags & MS_RDONLY)) {
 		err = ubifs_remount_rw(c);
 		if (err)
@@ -1633,6 +1670,14 @@ static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data)
 	} else if (!(sb->s_flags & MS_RDONLY) && (*flags & MS_RDONLY))
 		ubifs_remount_ro(c);
 
+	if (c->bulk_read == 1)
+		bu_init(c);
+	else {
+		dbg_gen("disable bulk-read");
+		kfree(c->bu.buf);
+		c->bu.buf = NULL;
+	}
+
 	return 0;
 }
 
@@ -1723,6 +1768,7 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
 	mutex_init(&c->log_mutex);
 	mutex_init(&c->mst_mutex);
 	mutex_init(&c->umount_mutex);
+	mutex_init(&c->bu_mutex);
 	init_waitqueue_head(&c->cmt_wq);
 	c->buds = RB_ROOT;
 	c->old_idx = RB_ROOT;
diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c
index d27fd918b9c9..6eef5344a145 100644
--- a/fs/ubifs/tnc.c
+++ b/fs/ubifs/tnc.c
@@ -1501,7 +1501,12 @@ out:
  * @bu: bulk-read parameters and results
  *
  * Lookup consecutive data node keys for the same inode that reside
- * consecutively in the same LEB.
+ * consecutively in the same LEB. This function returns zero in case of success
+ * and a negative error code in case of failure.
+ *
+ * Note, if the bulk-read buffer length (@bu->buf_len) is known, this function
+ * makes sure bulk-read nodes fit the buffer. Otherwise, this function prepares
+ * maxumum possible amount of nodes for bulk-read.
  */
 int ubifs_tnc_get_bu_keys(struct ubifs_info *c, struct bu_info *bu)
 {
@@ -2677,7 +2682,7 @@ int ubifs_tnc_remove_ino(struct ubifs_info *c, ino_t inum)
 	struct ubifs_dent_node *xent, *pxent = NULL;
 	struct qstr nm = { .name = NULL };
 
-	dbg_tnc("ino %lu", inum);
+	dbg_tnc("ino %lu", (unsigned long)inum);
 
 	/*
 	 * Walk all extended attribute entries and remove them together with
@@ -2697,7 +2702,8 @@ int ubifs_tnc_remove_ino(struct ubifs_info *c, ino_t inum)
 		}
 
 		xattr_inum = le64_to_cpu(xent->inum);
-		dbg_tnc("xent '%s', ino %lu", xent->name, xattr_inum);
+		dbg_tnc("xent '%s', ino %lu", xent->name,
+			(unsigned long)xattr_inum);
 
 		nm.name = xent->name;
 		nm.len = le16_to_cpu(xent->nlen);
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index a7bd32fa15b9..46b172560a06 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -753,7 +753,7 @@ struct ubifs_znode {
 };
 
 /**
- * struct bu_info - bulk-read information
+ * struct bu_info - bulk-read information.
  * @key: first data node key
  * @zbranch: zbranches of data nodes to bulk read
  * @buf: buffer to read into
@@ -969,7 +969,10 @@ struct ubifs_mount_opts {
  * @mst_node: master node
  * @mst_offs: offset of valid master node
  * @mst_mutex: protects the master node area, @mst_node, and @mst_offs
- * @bulk_read_buf_size: buffer size for bulk-reads
+ *
+ * @max_bu_buf_len: maximum bulk-read buffer length
+ * @bu_mutex: protects the pre-allocated bulk-read buffer and @c->bu
+ * @bu: pre-allocated bulk-read information
  *
  * @log_lebs: number of logical eraseblocks in the log
  * @log_bytes: log size in bytes
@@ -1217,7 +1220,10 @@ struct ubifs_info {
 	struct ubifs_mst_node *mst_node;
 	int mst_offs;
 	struct mutex mst_mutex;
-	int bulk_read_buf_size;
+
+	int max_bu_buf_len;
+	struct mutex bu_mutex;
+	struct bu_info bu;
 
 	int log_lebs;
 	long long log_bytes;
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 6e74b117aaf0..30ebde490f7f 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -106,6 +106,7 @@ void udf_clear_inode(struct inode *inode)
 		udf_truncate_tail_extent(inode);
 		unlock_kernel();
 		write_inode_now(inode, 0);
+		invalidate_inode_buffers(inode);
 	}
 	iinfo = UDF_I(inode);
 	kfree(iinfo->i_ext.i_data);
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index d700dacdb10e..c903130be7fd 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -212,7 +212,7 @@ xfs_rename(
 	if (unlikely((target_dp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) &&
 		     (target_dp->i_d.di_projid != src_ip->i_d.di_projid))) {
 		error = XFS_ERROR(EXDEV);
-		xfs_rename_unlock4(inodes, XFS_ILOCK_SHARED);
+		xfs_rename_unlock4(inodes, XFS_ILOCK_EXCL);
 		xfs_trans_cancel(tp, cancel_flags);
 		goto std_return;
 	}
diff --git a/include/acpi/acpredef.h b/include/acpi/acpredef.h
index 619fb75f8861..16a9ca9a66e4 100644
--- a/include/acpi/acpredef.h
+++ b/include/acpi/acpredef.h
@@ -167,7 +167,7 @@ static const union acpi_predefined_info predefined_names[] = {
 	{.info = {"_BFS", 1, 0}},
 	{.info = {"_BIF", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER,
 					  9,
-					  ACPI_RTYPE_STRING, 4, 0}},	/* fixed (9 Int),(4 Str) */
+					  ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER, 4, 0}},	/* fixed (9 Int),(4 Str) */
 	{.info = {"_BLT", 3, 0}},
 	{.info = {"_BMC", 1, 0}},
 	{.info = {"_BMD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}},	/* fixed (5 Int) */
@@ -346,7 +346,7 @@ static const union acpi_predefined_info predefined_names[] = {
 
 	/* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */
 
-	{.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_PACKAGE}},
+	{.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
 	{.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}},	/* fixed (2 Int), but is optional */
 	{.ret_info = {0, 0, 0, 0, 0, 0}}	/* Table terminator */
 };
diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
index 4ec0a296bdec..7abdaa91ccd3 100644
--- a/include/asm-generic/atomic.h
+++ b/include/asm-generic/atomic.h
@@ -251,7 +251,7 @@ static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
 #define atomic_long_cmpxchg(l, old, new) \
 	(atomic_cmpxchg((atomic_t *)(l), (old), (new)))
 #define atomic_long_xchg(v, new) \
-	(atomic_xchg((atomic_t *)(l), (new)))
+	(atomic_xchg((atomic_t *)(v), (new)))
 
 #endif  /*  BITS_PER_LONG == 64  */
 
diff --git a/include/asm-generic/audit_write.h b/include/asm-generic/audit_write.h
index f10d367fb2a5..c5f1c2c920e2 100644
--- a/include/asm-generic/audit_write.h
+++ b/include/asm-generic/audit_write.h
@@ -1,6 +1,8 @@
 #include <asm-generic/audit_dir_write.h>
 __NR_acct,
+#ifdef __NR_swapon
 __NR_swapon,
+#endif
 __NR_quotactl,
 __NR_truncate,
 #ifdef __NR_truncate64
diff --git a/include/asm-mn10300/uaccess.h b/include/asm-mn10300/uaccess.h
index 46b9b647f3c3..8a3a4dd55763 100644
--- a/include/asm-mn10300/uaccess.h
+++ b/include/asm-mn10300/uaccess.h
@@ -266,7 +266,7 @@ extern int __get_user_unknown(void);
 		"	.section	.fixup,\"ax\"	\n"		\
 		"4:					\n"		\
 		"	mov		%5,%0		\n"		\
-		"	jmp		2b		\n"		\
+		"	jmp		3b		\n"		\
 		"	.previous			\n"		\
 		"	.section	__ex_table,\"a\"\n"		\
 		"	.balign		4		\n"		\
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 28c7f1679d49..d5e8e5c89548 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -1151,6 +1151,7 @@ extern u32 drm_vblank_count(struct drm_device *dev, int crtc);
 extern void drm_handle_vblank(struct drm_device *dev, int crtc);
 extern int drm_vblank_get(struct drm_device *dev, int crtc);
 extern void drm_vblank_put(struct drm_device *dev, int crtc);
+extern void drm_vblank_cleanup(struct drm_device *dev);
 /* Modesetting support */
 extern int drm_modeset_ctl(struct drm_device *dev, void *data,
 			   struct drm_file *file_priv);
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 6272a395d43c..8f0672d13eb1 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -391,6 +391,7 @@ extern int audit_classify_arch(int arch);
 #ifdef CONFIG_AUDITSYSCALL
 /* These are defined in auditsc.c */
 				/* Public API */
+extern void audit_finish_fork(struct task_struct *child);
 extern int  audit_alloc(struct task_struct *task);
 extern void audit_free(struct task_struct *task);
 extern void audit_syscall_entry(int arch,
@@ -434,7 +435,7 @@ static inline void audit_ptrace(struct task_struct *t)
 
 				/* Private API (for audit.c only) */
 extern unsigned int audit_serial(void);
-extern void auditsc_get_stamp(struct audit_context *ctx,
+extern int auditsc_get_stamp(struct audit_context *ctx,
 			      struct timespec *t, unsigned int *serial);
 extern int  audit_set_loginuid(struct task_struct *task, uid_t loginuid);
 #define audit_get_loginuid(t) ((t)->loginuid)
@@ -504,6 +505,7 @@ static inline int audit_mq_getsetattr(mqd_t mqdes, struct mq_attr *mqstat)
 extern int audit_n_rules;
 extern int audit_signals;
 #else
+#define audit_finish_fork(t)
 #define audit_alloc(t) ({ 0; })
 #define audit_free(t) do { ; } while (0)
 #define audit_syscall_entry(ta,a,b,c,d,e) do { ; } while (0)
@@ -516,7 +518,7 @@ extern int audit_signals;
 #define audit_inode(n,d) do { ; } while (0)
 #define audit_inode_child(d,i,p) do { ; } while (0)
 #define audit_core_dumps(i) do { ; } while (0)
-#define auditsc_get_stamp(c,t,s) do { BUG(); } while (0)
+#define auditsc_get_stamp(c,t,s) (0)
 #define audit_get_loginuid(t) (-1)
 #define audit_get_sessionid(t) (-1)
 #define audit_log_task_context(b) do { ; } while (0)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index a135256b272c..031a315c0509 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -662,6 +662,7 @@ extern unsigned long blk_max_low_pfn, blk_max_pfn;
  * default timeout for SG_IO if none specified
  */
 #define BLK_DEFAULT_SG_TIMEOUT	(60 * HZ)
+#define BLK_MIN_SG_TIMEOUT	(7 * HZ)
 
 #ifdef CONFIG_BOUNCE
 extern int init_emergency_isa_pool(void);
@@ -786,6 +787,8 @@ static inline void blk_run_address_space(struct address_space *mapping)
 		blk_run_backing_dev(mapping->backing_dev_info, NULL);
 }
 
+extern void blkdev_dequeue_request(struct request *req);
+
 /*
  * blk_end_request() and friends.
  * __blk_end_request() and end_request() must be called with
@@ -820,11 +823,6 @@ extern void blk_update_request(struct request *rq, int error,
 extern unsigned int blk_rq_bytes(struct request *rq);
 extern unsigned int blk_rq_cur_bytes(struct request *rq);
 
-static inline void blkdev_dequeue_request(struct request *req)
-{
-	elv_dequeue_request(req->q, req);
-}
-
 /*
  * Access functions for manipulating queue properties
  */
@@ -921,6 +919,8 @@ extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
 
 #define MAX_SEGMENT_SIZE	65536
 
+#define BLK_SEG_BOUNDARY_MASK	0xFFFFFFFFUL
+
 #define blkdev_entry_to_request(entry) list_entry((entry), struct request, queuelist)
 
 static inline int queue_hardsect_size(struct request_queue *q)
diff --git a/include/linux/can/core.h b/include/linux/can/core.h
index e9ca210ffa5b..f50785ad4781 100644
--- a/include/linux/can/core.h
+++ b/include/linux/can/core.h
@@ -19,7 +19,7 @@
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
 
-#define CAN_VERSION "20071116"
+#define CAN_VERSION "20081130"
 
 /* increment this number each time you change some user-space interface */
 #define CAN_ABI_VERSION "8"
diff --git a/include/linux/compat.h b/include/linux/compat.h
index f061a1ea1b74..e88f3ecf38b4 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -252,12 +252,10 @@ extern int compat_ptrace_request(struct task_struct *child,
 				 compat_long_t request,
 				 compat_ulong_t addr, compat_ulong_t data);
 
-#ifdef __ARCH_WANT_COMPAT_SYS_PTRACE
 extern long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			       compat_ulong_t addr, compat_ulong_t data);
 asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
 				  compat_long_t addr, compat_long_t data);
-#endif	/* __ARCH_WANT_COMPAT_SYS_PTRACE */
 
 /*
  * epoll (fs/eventpoll.c) compat bits follow ...
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0dcdd9458f4b..4a853ef6fd35 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -63,23 +63,24 @@ extern int dir_notify_enable;
 #define MAY_ACCESS 16
 #define MAY_OPEN 32
 
-#define FMODE_READ ((__force fmode_t)1)
-#define FMODE_WRITE ((__force fmode_t)2)
-
-/* Internal kernel extensions */
-#define FMODE_LSEEK	((__force fmode_t)4)
-#define FMODE_PREAD	((__force fmode_t)8)
-#define FMODE_PWRITE	FMODE_PREAD	/* These go hand in hand */
-
-/* File is being opened for execution. Primary users of this flag are
-   distributed filesystems that can use it to achieve correct ETXTBUSY
-   behavior for cross-node execution/opening_for_writing of files */
-#define FMODE_EXEC	((__force fmode_t)16)
-
-#define FMODE_NDELAY	((__force fmode_t)32)
-#define FMODE_EXCL	((__force fmode_t)64)
+/* file is open for reading */
+#define FMODE_READ		((__force fmode_t)1)
+/* file is open for writing */
+#define FMODE_WRITE		((__force fmode_t)2)
+/* file is seekable */
+#define FMODE_LSEEK		((__force fmode_t)4)
+/* file can be accessed using pread/pwrite */
+#define FMODE_PREAD		((__force fmode_t)8)
+#define FMODE_PWRITE		FMODE_PREAD	/* These go hand in hand */
+/* File is opened for execution with sys_execve / sys_uselib */
+#define FMODE_EXEC		((__force fmode_t)16)
+/* File is opened with O_NDELAY (only set for block devices) */
+#define FMODE_NDELAY		((__force fmode_t)32)
+/* File is opened with O_EXCL (only set for block devices) */
+#define FMODE_EXCL		((__force fmode_t)64)
+/* File is opened using open(.., 3, ..) and is writeable only for ioctls
+   (specialy hack for floppy.c) */
 #define FMODE_WRITE_IOCTL	((__force fmode_t)128)
-#define FMODE_NDELAY_NOW	((__force fmode_t)256)
 
 #define RW_MASK		1
 #define RWA_MASK	2
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 703eb53cfa2b..9c5bc6be2b09 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -6,6 +6,7 @@
 #include <linux/ktime.h>
 #include <linux/init.h>
 #include <linux/types.h>
+#include <linux/module.h>
 #include <linux/kallsyms.h>
 
 #ifdef CONFIG_FUNCTION_TRACER
@@ -231,7 +232,7 @@ ftrace_init_module(unsigned long *start, unsigned long *end) { }
 
 struct boot_trace {
 	pid_t			caller;
-	char			func[KSYM_NAME_LEN];
+	char			func[KSYM_SYMBOL_LEN];
 	int			result;
 	unsigned long long	duration;		/* usecs */
 	ktime_t			calltime;
diff --git a/include/linux/highmem.h b/include/linux/highmem.h
index 7dcbc82f3b7b..13875ce9112a 100644
--- a/include/linux/highmem.h
+++ b/include/linux/highmem.h
@@ -63,12 +63,14 @@ static inline void *kmap_atomic(struct page *page, enum km_type idx)
 #endif /* CONFIG_HIGHMEM */
 
 /* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */
+#ifndef clear_user_highpage
 static inline void clear_user_highpage(struct page *page, unsigned long vaddr)
 {
 	void *addr = kmap_atomic(page, KM_USER0);
 	clear_user_page(addr, vaddr, page);
 	kunmap_atomic(addr, KM_USER0);
 }
+#endif
 
 #ifndef __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
 /**
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 54525be4b5f8..010fb26a1579 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1296,6 +1296,13 @@ extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *o
 #define ide_pci_register_driver(d) pci_register_driver(d)
 #endif
 
+static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
+{
+	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5)
+		return 1;
+	return 0;
+}
+
 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int,
 			 hw_regs_t *, hw_regs_t **);
 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
@@ -1375,6 +1382,7 @@ enum {
 	IDE_HFLAG_IO_32BIT		= (1 << 24),
 	/* unmask IRQs */
 	IDE_HFLAG_UNMASK_IRQS		= (1 << 25),
+	IDE_HFLAG_BROKEN_ALTSTATUS	= (1 << 26),
 	/* serialize ports if DMA is possible (for sl82c105) */
 	IDE_HFLAG_SERIALIZE_DMA		= (1 << 27),
 	/* force host out of "simplex" mode */
diff --git a/include/linux/idr.h b/include/linux/idr.h
index fa035f96f2a3..dd846df8cd32 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -52,13 +52,14 @@ struct idr_layer {
 	unsigned long		 bitmap; /* A zero bit means "space here" */
 	struct idr_layer	*ary[1<<IDR_BITS];
 	int			 count;	 /* When zero, we can release it */
+	int			 layer;	 /* distance from leaf */
 	struct rcu_head		 rcu_head;
 };
 
 struct idr {
 	struct idr_layer *top;
 	struct idr_layer *id_free;
-	int		  layers;
+	int		  layers; /* only valid without concurrent changes */
 	int		  id_free_cnt;
 	spinlock_t	  lock;
 };
diff --git a/include/linux/irq.h b/include/linux/irq.h
index d058c57be02d..3dddfa703ebd 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -63,7 +63,8 @@ typedef	void (*irq_flow_handler_t)(unsigned int irq,
 #define IRQ_MOVE_PENDING	0x00200000	/* need to re-target IRQ destination */
 #define IRQ_NO_BALANCING	0x00400000	/* IRQ is excluded from balancing */
 #define IRQ_SPURIOUS_DISABLED	0x00800000	/* IRQ was disabled by the spurious trap */
-#define IRQ_MOVE_PCNTXT	0x01000000	/* IRQ migration from process context */
+#define IRQ_MOVE_PCNTXT		0x01000000	/* IRQ migration from process context */
+#define IRQ_AFFINITY_SET	0x02000000	/* IRQ affinity was set from userspace*/
 
 #ifdef CONFIG_IRQ_PER_CPU
 # define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
@@ -130,7 +131,7 @@ struct irq_chip {
 
 /**
  * struct irq_desc - interrupt descriptor
- *
+ * @irq:		interrupt number for this descriptor
  * @handle_irq:		highlevel irq-events handler [if NULL, __do_IRQ()]
  * @chip:		low level interrupt hardware access
  * @msi_desc:		MSI descriptor
@@ -149,7 +150,6 @@ struct irq_chip {
  * @cpu:		cpu index useful for balancing
  * @pending_mask:	pending rebalanced interrupts
  * @dir:		/proc/irq/ procfs entry
- * @affinity_entry:	/proc/irq/smp_affinity procfs entry on SMP
  * @name:		flow handler name for /proc/interrupts output
  */
 struct irq_desc {
@@ -210,7 +210,6 @@ extern int setup_irq(unsigned int irq, struct irqaction *new);
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
 
-void set_pending_irq(unsigned int irq, cpumask_t mask);
 void move_native_irq(int irq);
 void move_masked_irq(int irq);
 
@@ -228,10 +227,6 @@ static inline void move_masked_irq(int irq)
 {
 }
 
-static inline void set_pending_irq(unsigned int irq, cpumask_t mask)
-{
-}
-
 #endif /* CONFIG_GENERIC_PENDING_IRQ */
 
 #else /* CONFIG_SMP */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 59b0f1c807b5..ed3f26eb5df1 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -375,6 +375,7 @@ enum {
 	ATA_HORKAGE_BRIDGE_OK	= (1 << 10),	/* no bridge limits */
 	ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
 						    not multiple of 16 bytes */
+	ATA_HORKAGE_FIRMWARE_WARN = (1 << 12),	/* firwmare update warning */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */
diff --git a/include/linux/memory.h b/include/linux/memory.h
index 2f5f8a5ef2a0..36c82c9e6ea7 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -91,7 +91,7 @@ extern int memory_notify(unsigned long val, void *v);
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 #define hotplug_memory_notifier(fn, pri) {			\
-	static struct notifier_block fn##_mem_nb =		\
+	static __meminitdata struct notifier_block fn##_mem_nb =\
 		{ .notifier_call = fn, .priority = pri };	\
 	register_memory_notifier(&fn##_mem_nb);			\
 }
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index bd9977b89490..371086fd946f 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -179,6 +179,7 @@ struct mlx4_caps {
 	int			num_ports;
 	int			vl_cap[MLX4_MAX_PORTS + 1];
 	int			ib_mtu_cap[MLX4_MAX_PORTS + 1];
+	__be32			ib_port_def_cap[MLX4_MAX_PORTS + 1];
 	u64			def_mac[MLX4_MAX_PORTS + 1];
 	int			eth_mtu_cap[MLX4_MAX_PORTS + 1];
 	int			gid_table_len[MLX4_MAX_PORTS + 1];
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 9d77b1d7dca8..e26f54952892 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -319,6 +319,7 @@ enum
 {
 	NAPI_STATE_SCHED,	/* Poll is scheduled */
 	NAPI_STATE_DISABLE,	/* Disable pending */
+	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
 };
 
 extern void __napi_schedule(struct napi_struct *n);
@@ -1497,6 +1498,12 @@ static inline void netif_rx_complete(struct net_device *dev,
 {
 	unsigned long flags;
 
+	/*
+	 * don't let napi dequeue from the cpu poll list
+	 * just in case its running on a different cpu
+	 */
+	if (unlikely(test_bit(NAPI_STATE_NPSVC, &napi->state)))
+		return;
 	local_irq_save(flags);
 	__netif_rx_complete(dev, napi);
 	local_irq_restore(flags);
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index be41b609c88f..e52ce475d19f 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -251,7 +251,7 @@ struct xt_target_param {
  */
 struct xt_tgchk_param {
 	const char *table;
-	void *entryinfo;
+	const void *entryinfo;
 	const struct xt_target *target;
 	void *targinfo;
 	unsigned int hook_mask;
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index f546ad6fc028..1e6d34bfa094 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -17,7 +17,7 @@ struct page_cgroup {
 	struct list_head lru;		/* per cgroup LRU list */
 };
 
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat);
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat);
 void __init page_cgroup_init(void);
 struct page_cgroup *lookup_page_cgroup(struct page *page);
 
@@ -91,7 +91,7 @@ static inline void unlock_page_cgroup(struct page_cgroup *pc)
 #else /* CONFIG_CGROUP_MEM_RES_CTLR */
 struct page_cgroup;
 
-static inline void pgdat_page_cgroup_init(struct pglist_data *pgdat)
+static inline void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
 {
 }
 
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 644ffbda17ca..55e30d114477 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -630,6 +630,10 @@ struct user_struct {
 	atomic_t inotify_watches; /* How many inotify watches does this user have? */
 	atomic_t inotify_devs;	/* How many inotify devs does this user have opened? */
 #endif
+#ifdef CONFIG_EPOLL
+	atomic_t epoll_devs;	/* The number of epoll descriptors currently open */
+	atomic_t epoll_watches;	/* The number of file descriptors currently watched */
+#endif
 #ifdef CONFIG_POSIX_MQUEUE
 	/* protected by mq_lock	*/
 	unsigned long mq_bytes;	/* How many bytes can be allocated to mqueue? */
diff --git a/include/linux/security.h b/include/linux/security.h
index c13f1cec9abb..e3d4ecda2673 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -1818,17 +1818,21 @@ static inline int security_settime(struct timespec *ts, struct timezone *tz)
 
 static inline int security_vm_enough_memory(long pages)
 {
+	WARN_ON(current->mm == NULL);
 	return cap_vm_enough_memory(current->mm, pages);
 }
 
-static inline int security_vm_enough_memory_kern(long pages)
+static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
 {
-	return cap_vm_enough_memory(current->mm, pages);
+	WARN_ON(mm == NULL);
+	return cap_vm_enough_memory(mm, pages);
 }
 
-static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
+static inline int security_vm_enough_memory_kern(long pages)
 {
-	return cap_vm_enough_memory(mm, pages);
+	/* If current->mm is a kernel thread then we will pass NULL,
+	   for this specific case that is fine */
+	return cap_vm_enough_memory(current->mm, pages);
 }
 
 static inline int security_bprm_alloc(struct linux_binprm *bprm)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 4e4f1277f3bf..feb3b939ec4b 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -158,6 +158,8 @@
 /* SH-SCI */
 #define PORT_SCIFA	83
 
+#define PORT_S3C6400	84
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 3f9a60043a97..6e7ba16ff454 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -146,6 +146,8 @@ static inline void smp_send_reschedule(int cpu) { }
 })
 #define smp_call_function_mask(mask, func, info, wait) \
 			(up_smp_call_function(func, info))
+#define smp_call_function_many(mask, func, info, wait) \
+			(up_smp_call_function(func, info))
 static inline void init_call_single_data(void)
 {
 }
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index c29ff1da8a18..1614d78c60ed 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -9,6 +9,7 @@
 extern void unix_inflight(struct file *fp);
 extern void unix_notinflight(struct file *fp);
 extern void unix_gc(void);
+extern void wait_for_unix_gc(void);
 
 #define UNIX_HASH_SIZE	256
 
diff --git a/include/net/request_sock.h b/include/net/request_sock.h
index cac811e51f6d..c7190846e128 100644
--- a/include/net/request_sock.h
+++ b/include/net/request_sock.h
@@ -31,6 +31,7 @@ struct request_sock_ops {
 	int		family;
 	int		obj_size;
 	struct kmem_cache	*slab;
+	char		*slab_name;
 	int		(*rtx_syn_ack)(struct sock *sk,
 				       struct request_sock *req);
 	void		(*send_ack)(struct sock *sk, struct sk_buff *skb,
diff --git a/include/net/timewait_sock.h b/include/net/timewait_sock.h
index 1e1ee3253fd8..97c3b14da55d 100644
--- a/include/net/timewait_sock.h
+++ b/include/net/timewait_sock.h
@@ -16,6 +16,7 @@
 
 struct timewait_sock_ops {
 	struct kmem_cache	*twsk_slab;
+	char		*twsk_slab_name;
 	unsigned int	twsk_obj_size;
 	int		(*twsk_unique)(struct sock *sk,
 				       struct sock *sktw, void *twp);
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index 49d8913c4f86..6e04e6fe79c7 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -357,7 +357,7 @@ struct fc_rport {	/* aka fc_starget_attrs */
 /* bit field values for struct fc_rport "flags" field: */
 #define FC_RPORT_DEVLOSS_PENDING	0x01
 #define FC_RPORT_SCAN_PENDING		0x02
-#define FC_RPORT_FAST_FAIL_TIMEDOUT	0x03
+#define FC_RPORT_FAST_FAIL_TIMEDOUT	0x04
 
 #define	dev_to_rport(d)				\
 	container_of(d, struct fc_rport, dev)
diff --git a/include/video/radeon.h b/include/video/radeon.h
index d5dcaf154ba4..1cd09cc5b169 100644
--- a/include/video/radeon.h
+++ b/include/video/radeon.h
@@ -525,9 +525,6 @@
 #define CRTC_DISPLAY_DIS			   (1 << 10)
 #define CRTC_CRT_ON				   (1 << 15)
 
-/* DSTCACHE_MODE bits constants */
-#define RB2D_DC_AUTOFLUSH_ENABLE                   (1 << 8)
-#define RB2D_DC_DC_DISABLE_IGNORE_PE               (1 << 17)
 
 /* DSTCACHE_CTLSTAT bit constants */
 #define RB2D_DC_FLUSH_2D			   (1 << 0)
@@ -869,10 +866,15 @@
 #define GMC_DST_16BPP_YVYU422                      0x00000c00
 #define GMC_DST_32BPP_AYUV444                      0x00000e00
 #define GMC_DST_16BPP_ARGB4444                     0x00000f00
+#define GMC_SRC_MONO                               0x00000000
+#define GMC_SRC_MONO_LBKGD                         0x00001000
+#define GMC_SRC_DSTCOLOR                           0x00003000
 #define GMC_BYTE_ORDER_MSB_TO_LSB                  0x00000000
 #define GMC_BYTE_ORDER_LSB_TO_MSB                  0x00004000
 #define GMC_DP_CONVERSION_TEMP_9300                0x00008000
 #define GMC_DP_CONVERSION_TEMP_6500                0x00000000
+#define GMC_DP_SRC_RECT                            0x02000000
+#define GMC_DP_SRC_HOST                            0x03000000
 #define GMC_DP_SRC_HOST_BYTEALIGN                  0x04000000
 #define GMC_3D_FCN_EN_CLR                          0x00000000
 #define GMC_3D_FCN_EN_SET                          0x08000000
@@ -883,9 +885,6 @@
 #define GMC_WRITE_MASK_LEAVE                       0x00000000
 #define GMC_WRITE_MASK_SET                         0x40000000
 #define GMC_CLR_CMP_CNTL_DIS      		   (1 << 28)
-#define GMC_SRC_DATATYPE_MASK			   (3 << 12)
-#define GMC_SRC_DATATYPE_MONO_FG_BG		   (0 << 12)
-#define GMC_SRC_DATATYPE_MONO_FG_LA		   (1 << 12)
 #define GMC_SRC_DATATYPE_COLOR			   (3 << 12)
 #define ROP3_S                			   0x00cc0000
 #define ROP3_SRCCOPY				   0x00cc0000
@@ -894,7 +893,6 @@
 #define DP_SRC_SOURCE_MASK        		   (7    << 24)
 #define GMC_BRUSH_NONE            		   (15   <<  4)
 #define DP_SRC_SOURCE_MEMORY			   (2    << 24)
-#define DP_SRC_SOURCE_HOST_DATA			   (3    << 24)
 #define GMC_BRUSH_SOLIDCOLOR			   0x000000d0
 
 /* DP_MIX bit constants */
@@ -980,12 +978,6 @@
 #define DISP_PWR_MAN_TV_ENABLE_RST                 (1 << 25)
 #define DISP_PWR_MAN_AUTO_PWRUP_EN                 (1 << 26)
 
-/* RBBM_GUICNTL constants */
-#define RBBM_GUICNTL_HOST_DATA_SWAP_NONE	   (0 << 0)
-#define RBBM_GUICNTL_HOST_DATA_SWAP_16BIT          (1 << 0)
-#define RBBM_GUICNTL_HOST_DATA_SWAP_32BIT	   (2 << 0)
-#define RBBM_GUICNTL_HOST_DATA_SWAP_HDW		   (3 << 0)
-
 /* masks */
 
 #define CONFIG_MEMSIZE_MASK		0x1f000000
diff --git a/kernel/audit.c b/kernel/audit.c
index 4414e93d8750..ce6d8ea3131e 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -61,8 +61,11 @@
 
 #include "audit.h"
 
-/* No auditing will take place until audit_initialized != 0.
+/* No auditing will take place until audit_initialized == AUDIT_INITIALIZED.
  * (Initialization happens after skb_init is called.) */
+#define AUDIT_DISABLED		-1
+#define AUDIT_UNINITIALIZED	0
+#define AUDIT_INITIALIZED	1
 static int	audit_initialized;
 
 #define AUDIT_OFF	0
@@ -965,6 +968,9 @@ static int __init audit_init(void)
 {
 	int i;
 
+	if (audit_initialized == AUDIT_DISABLED)
+		return 0;
+
 	printk(KERN_INFO "audit: initializing netlink socket (%s)\n",
 	       audit_default ? "enabled" : "disabled");
 	audit_sock = netlink_kernel_create(&init_net, NETLINK_AUDIT, 0,
@@ -976,7 +982,7 @@ static int __init audit_init(void)
 
 	skb_queue_head_init(&audit_skb_queue);
 	skb_queue_head_init(&audit_skb_hold_queue);
-	audit_initialized = 1;
+	audit_initialized = AUDIT_INITIALIZED;
 	audit_enabled = audit_default;
 	audit_ever_enabled |= !!audit_default;
 
@@ -999,13 +1005,21 @@ __initcall(audit_init);
 static int __init audit_enable(char *str)
 {
 	audit_default = !!simple_strtol(str, NULL, 0);
-	printk(KERN_INFO "audit: %s%s\n",
-	       audit_default ? "enabled" : "disabled",
-	       audit_initialized ? "" : " (after initialization)");
-	if (audit_initialized) {
+	if (!audit_default)
+		audit_initialized = AUDIT_DISABLED;
+
+	printk(KERN_INFO "audit: %s", audit_default ? "enabled" : "disabled");
+
+	if (audit_initialized == AUDIT_INITIALIZED) {
 		audit_enabled = audit_default;
 		audit_ever_enabled |= !!audit_default;
+	} else if (audit_initialized == AUDIT_UNINITIALIZED) {
+		printk(" (after initialization)");
+	} else {
+		printk(" (until reboot)");
 	}
+	printk("\n");
+
 	return 1;
 }
 
@@ -1107,9 +1121,7 @@ unsigned int audit_serial(void)
 static inline void audit_get_stamp(struct audit_context *ctx,
 				   struct timespec *t, unsigned int *serial)
 {
-	if (ctx)
-		auditsc_get_stamp(ctx, t, serial);
-	else {
+	if (!ctx || !auditsc_get_stamp(ctx, t, serial)) {
 		*t = CURRENT_TIME;
 		*serial = audit_serial();
 	}
@@ -1146,7 +1158,7 @@ struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask,
 	int reserve;
 	unsigned long timeout_start = jiffies;
 
-	if (!audit_initialized)
+	if (audit_initialized != AUDIT_INITIALIZED)
 		return NULL;
 
 	if (unlikely(audit_filter_type(type)))
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index cf5bc2f5f9c3..2a3f0afc4d2a 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1459,7 +1459,6 @@ void audit_free(struct task_struct *tsk)
 
 /**
  * audit_syscall_entry - fill in an audit record at syscall entry
- * @tsk: task being audited
  * @arch: architecture type
  * @major: major syscall type (function)
  * @a1: additional syscall register 1
@@ -1548,9 +1547,25 @@ void audit_syscall_entry(int arch, int major,
 	context->ppid       = 0;
 }
 
+void audit_finish_fork(struct task_struct *child)
+{
+	struct audit_context *ctx = current->audit_context;
+	struct audit_context *p = child->audit_context;
+	if (!p || !ctx || !ctx->auditable)
+		return;
+	p->arch = ctx->arch;
+	p->major = ctx->major;
+	memcpy(p->argv, ctx->argv, sizeof(ctx->argv));
+	p->ctime = ctx->ctime;
+	p->dummy = ctx->dummy;
+	p->auditable = ctx->auditable;
+	p->in_syscall = ctx->in_syscall;
+	p->filterkey = kstrdup(ctx->filterkey, GFP_KERNEL);
+	p->ppid = current->pid;
+}
+
 /**
  * audit_syscall_exit - deallocate audit context after a system call
- * @tsk: task being audited
  * @valid: success/failure flag
  * @return_code: syscall return value
  *
@@ -1942,15 +1957,18 @@ EXPORT_SYMBOL_GPL(__audit_inode_child);
  *
  * Also sets the context as auditable.
  */
-void auditsc_get_stamp(struct audit_context *ctx,
+int auditsc_get_stamp(struct audit_context *ctx,
 		       struct timespec *t, unsigned int *serial)
 {
+	if (!ctx->in_syscall)
+		return 0;
 	if (!ctx->serial)
 		ctx->serial = audit_serial();
 	t->tv_sec  = ctx->ctime.tv_sec;
 	t->tv_nsec = ctx->ctime.tv_nsec;
 	*serial    = ctx->serial;
 	ctx->auditable = 1;
+	return 1;
 }
 
 /* global counter which is incremented every time something logs in */
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index fe00b3b983a8..8185a0f09594 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -702,7 +702,7 @@ static int rebind_subsystems(struct cgroupfs_root *root,
 	 * any child cgroups exist. This is theoretically supportable
 	 * but involves complex error handling, so it's being left until
 	 * later */
-	if (!list_empty(&cgrp->children))
+	if (root->number_of_cgroups > 1)
 		return -EBUSY;
 
 	/* Process each subsystem */
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 5a732c5ef08b..8ea32e8d68b0 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -462,7 +462,7 @@ out:
  * It must be called by the arch code on the new cpu, before the new cpu
  * enables interrupts and before the "boot" cpu returns from __cpu_up().
  */
-void notify_cpu_starting(unsigned int cpu)
+void __cpuinit notify_cpu_starting(unsigned int cpu)
 {
 	unsigned long val = CPU_STARTING;
 
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index da7ff6137f37..96c0ba13b8cd 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -585,7 +585,7 @@ static int generate_sched_domains(cpumask_t **domains,
 	int i, j, k;		/* indices for partition finding loops */
 	cpumask_t *doms;	/* resulting partition; i.e. sched domains */
 	struct sched_domain_attr *dattr;  /* attributes for custom domains */
-	int ndoms;		/* number of sched domains in result */
+	int ndoms = 0;		/* number of sched domains in result */
 	int nslot;		/* next empty doms[] cpumask_t slot */
 
 	doms = NULL;
diff --git a/kernel/fork.c b/kernel/fork.c
index 2a372a0e206f..495da2e9a8b4 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -315,17 +315,20 @@ static int dup_mmap(struct mm_struct *mm, struct mm_struct *oldmm)
 		file = tmp->vm_file;
 		if (file) {
 			struct inode *inode = file->f_path.dentry->d_inode;
+			struct address_space *mapping = file->f_mapping;
+
 			get_file(file);
 			if (tmp->vm_flags & VM_DENYWRITE)
 				atomic_dec(&inode->i_writecount);
-
-			/* insert tmp into the share list, just after mpnt */
-			spin_lock(&file->f_mapping->i_mmap_lock);
+			spin_lock(&mapping->i_mmap_lock);
+			if (tmp->vm_flags & VM_SHARED)
+				mapping->i_mmap_writable++;
 			tmp->vm_truncate_count = mpnt->vm_truncate_count;
-			flush_dcache_mmap_lock(file->f_mapping);
+			flush_dcache_mmap_lock(mapping);
+			/* insert tmp into the share list, just after mpnt */
 			vma_prio_tree_add(tmp, mpnt);
-			flush_dcache_mmap_unlock(file->f_mapping);
-			spin_unlock(&file->f_mapping->i_mmap_lock);
+			flush_dcache_mmap_unlock(mapping);
+			spin_unlock(&mapping->i_mmap_lock);
 		}
 
 		/*
@@ -1398,6 +1401,7 @@ long do_fork(unsigned long clone_flags,
 			init_completion(&vfork);
 		}
 
+		audit_finish_fork(p);
 		tracehook_report_clone(trace, regs, clone_flags, nr, p);
 
 		/*
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index c9767e641980..64c1c7253dae 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -25,6 +25,8 @@ static inline void unregister_handler_proc(unsigned int irq,
 					   struct irqaction *action) { }
 #endif
 
+extern int irq_select_affinity_usr(unsigned int irq);
+
 /*
  * Debugging printout:
  */
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index c498a1b8c621..801addda3c43 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -82,24 +82,27 @@ int irq_can_set_affinity(unsigned int irq)
 int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
+	unsigned long flags;
 
 	if (!desc->chip->set_affinity)
 		return -EINVAL;
 
+	spin_lock_irqsave(&desc->lock, flags);
+
 #ifdef CONFIG_GENERIC_PENDING_IRQ
 	if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&desc->lock, flags);
 		desc->affinity = cpumask;
 		desc->chip->set_affinity(irq, cpumask);
-		spin_unlock_irqrestore(&desc->lock, flags);
-	} else
-		set_pending_irq(irq, cpumask);
+	} else {
+		desc->status |= IRQ_MOVE_PENDING;
+		desc->pending_mask = cpumask;
+	}
 #else
 	desc->affinity = cpumask;
 	desc->chip->set_affinity(irq, cpumask);
 #endif
+	desc->status |= IRQ_AFFINITY_SET;
+	spin_unlock_irqrestore(&desc->lock, flags);
 	return 0;
 }
 
@@ -107,24 +110,59 @@ int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
 /*
  * Generic version of the affinity autoselector.
  */
-int irq_select_affinity(unsigned int irq)
+int do_irq_select_affinity(unsigned int irq, struct irq_desc *desc)
 {
 	cpumask_t mask;
-	struct irq_desc *desc;
 
 	if (!irq_can_set_affinity(irq))
 		return 0;
 
 	cpus_and(mask, cpu_online_map, irq_default_affinity);
 
-	desc = irq_to_desc(irq);
+	/*
+	 * Preserve an userspace affinity setup, but make sure that
+	 * one of the targets is online.
+	 */
+	if (desc->status & (IRQ_AFFINITY_SET | IRQ_NO_BALANCING)) {
+		if (cpus_intersects(desc->affinity, cpu_online_map))
+			mask = desc->affinity;
+		else
+			desc->status &= ~IRQ_AFFINITY_SET;
+	}
+
 	desc->affinity = mask;
 	desc->chip->set_affinity(irq, mask);
 
 	return 0;
 }
+#else
+static inline int do_irq_select_affinity(unsigned int irq, struct irq_desc *d)
+{
+	return irq_select_affinity(irq);
+}
 #endif
 
+/*
+ * Called when affinity is set via /proc/irq
+ */
+int irq_select_affinity_usr(unsigned int irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&desc->lock, flags);
+	ret = do_irq_select_affinity(irq, desc);
+	spin_unlock_irqrestore(&desc->lock, flags);
+
+	return ret;
+}
+
+#else
+static inline int do_irq_select_affinity(int irq, struct irq_desc *desc)
+{
+	return 0;
+}
 #endif
 
 /**
@@ -327,7 +365,7 @@ int __irq_set_trigger(struct irq_desc *desc, unsigned int irq,
 		 * IRQF_TRIGGER_* but the PIC does not support multiple
 		 * flow-types?
 		 */
-		pr_warning("No set_type function for IRQ %d (%s)\n", irq,
+		pr_debug("No set_type function for IRQ %d (%s)\n", irq,
 				chip ? (chip->name ? : "unknown") : "unknown");
 		return 0;
 	}
@@ -445,8 +483,12 @@ __setup_irq(unsigned int irq, struct irq_desc * desc, struct irqaction *new)
 			/* Undo nested disables: */
 			desc->depth = 1;
 
+		/* Exclude IRQ from balancing if requested */
+		if (new->flags & IRQF_NOBALANCING)
+			desc->status |= IRQ_NO_BALANCING;
+
 		/* Set default affinity mask once everything is setup */
-		irq_select_affinity(irq);
+		do_irq_select_affinity(irq, desc);
 
 	} else if ((new->flags & IRQF_TRIGGER_MASK)
 			&& (new->flags & IRQF_TRIGGER_MASK)
@@ -459,10 +501,6 @@ __setup_irq(unsigned int irq, struct irq_desc * desc, struct irqaction *new)
 
 	*p = new;
 
-	/* Exclude IRQ from balancing */
-	if (new->flags & IRQF_NOBALANCING)
-		desc->status |= IRQ_NO_BALANCING;
-
 	/* Reset broken irq detection when installing new handler */
 	desc->irq_count = 0;
 	desc->irqs_unhandled = 0;
diff --git a/kernel/irq/migration.c b/kernel/irq/migration.c
index 90b920d3f52b..9db681d95814 100644
--- a/kernel/irq/migration.c
+++ b/kernel/irq/migration.c
@@ -1,17 +1,6 @@
 
 #include <linux/irq.h>
 
-void set_pending_irq(unsigned int irq, cpumask_t mask)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-	unsigned long flags;
-
-	spin_lock_irqsave(&desc->lock, flags);
-	desc->status |= IRQ_MOVE_PENDING;
-	desc->pending_mask = mask;
-	spin_unlock_irqrestore(&desc->lock, flags);
-}
-
 void move_masked_irq(int irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c
index 4d161c70ba55..d257e7d6a8a4 100644
--- a/kernel/irq/proc.c
+++ b/kernel/irq/proc.c
@@ -62,7 +62,7 @@ static ssize_t irq_affinity_proc_write(struct file *file,
 	if (!cpus_intersects(new_value, cpu_online_map))
 		/* Special case for empty set - allow the architecture
 		   code to set default SMP affinity. */
-		return irq_select_affinity(irq) ? -EINVAL : count;
+		return irq_select_affinity_usr(irq) ? -EINVAL : count;
 
 	irq_set_affinity(irq, new_value);
 
diff --git a/kernel/latencytop.c b/kernel/latencytop.c
index 5e7b45c56923..449db466bdbc 100644
--- a/kernel/latencytop.c
+++ b/kernel/latencytop.c
@@ -191,7 +191,7 @@ static int lstats_show(struct seq_file *m, void *v)
 				latency_record[i].time,
 				latency_record[i].max);
 			for (q = 0; q < LT_BACKTRACEDEPTH; q++) {
-				char sym[KSYM_NAME_LEN];
+				char sym[KSYM_SYMBOL_LEN];
 				char *c;
 				if (!latency_record[i].backtrace[q])
 					break;
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 06e157119d2b..46a404173db2 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -3276,10 +3276,10 @@ void __init lockdep_info(void)
 {
 	printk("Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar\n");
 
-	printk("... MAX_LOCKDEP_SUBCLASSES:    %lu\n", MAX_LOCKDEP_SUBCLASSES);
+	printk("... MAX_LOCKDEP_SUBCLASSES:  %lu\n", MAX_LOCKDEP_SUBCLASSES);
 	printk("... MAX_LOCK_DEPTH:          %lu\n", MAX_LOCK_DEPTH);
 	printk("... MAX_LOCKDEP_KEYS:        %lu\n", MAX_LOCKDEP_KEYS);
-	printk("... CLASSHASH_SIZE:           %lu\n", CLASSHASH_SIZE);
+	printk("... CLASSHASH_SIZE:          %lu\n", CLASSHASH_SIZE);
 	printk("... MAX_LOCKDEP_ENTRIES:     %lu\n", MAX_LOCKDEP_ENTRIES);
 	printk("... MAX_LOCKDEP_CHAINS:      %lu\n", MAX_LOCKDEP_CHAINS);
 	printk("... CHAINHASH_SIZE:          %lu\n", CHAINHASH_SIZE);
diff --git a/kernel/panic.c b/kernel/panic.c
index 6513aac8e992..4d5088355bfe 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -167,6 +167,7 @@ static const struct tnt tnts[] = {
  *  'M' - System experienced a machine check exception.
  *  'B' - System has hit bad_page.
  *  'U' - Userspace-defined naughtiness.
+ *  'D' - Kernel has oopsed before
  *  'A' - ACPI table overridden.
  *  'W' - Taint on warning.
  *  'C' - modules from drivers/staging are loaded.
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 895337b16a24..4e5288a831de 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -311,7 +311,7 @@ static int cpu_clock_sample_group(const clockid_t which_clock,
 	struct task_cputime cputime;
 
 	thread_group_cputime(p, &cputime);
-	switch (which_clock) {
+	switch (CPUCLOCK_WHICH(which_clock)) {
 	default:
 		return -EINVAL;
 	case CPUCLOCK_PROF:
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index b7713b53d07a..6da14358537c 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -633,7 +633,7 @@ void swsusp_close(fmode_t mode)
 		return;
 	}
 
-	blkdev_put(resume_bdev, mode); /* move up */
+	blkdev_put(resume_bdev, mode);
 }
 
 static int swsusp_header_init(void)
diff --git a/kernel/profile.c b/kernel/profile.c
index 5b7d1ac7124c..dc41827fbfee 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -351,7 +351,7 @@ out:
 	put_cpu();
 }
 
-static int __devinit profile_cpu_callback(struct notifier_block *info,
+static int __cpuinit profile_cpu_callback(struct notifier_block *info,
 					unsigned long action, void *__cpu)
 {
 	int node, cpu = (unsigned long)__cpu;
@@ -596,7 +596,7 @@ out_cleanup:
 #define create_hash_tables()			({ 0; })
 #endif
 
-int create_proc_profile(void)
+int __ref create_proc_profile(void) /* false positive from hotcpu_notifier */
 {
 	struct proc_dir_entry *entry;
 
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 1e68e4c39e2c..4c8bcd7dd8e0 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -612,7 +612,7 @@ int generic_ptrace_pokedata(struct task_struct *tsk, long addr, long data)
 	return (copied == sizeof(data)) ? 0 : -EIO;
 }
 
-#if defined CONFIG_COMPAT && defined __ARCH_WANT_COMPAT_SYS_PTRACE
+#if defined CONFIG_COMPAT
 #include <linux/compat.h>
 
 int compat_ptrace_request(struct task_struct *child, compat_long_t request,
@@ -709,4 +709,4 @@ asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
 	unlock_kernel();
 	return ret;
 }
-#endif	/* CONFIG_COMPAT && __ARCH_WANT_COMPAT_SYS_PTRACE */
+#endif	/* CONFIG_COMPAT */
diff --git a/kernel/relay.c b/kernel/relay.c
index 32b0befdcb6a..09ac2008f77b 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -1317,12 +1317,9 @@ static ssize_t relay_file_splice_read(struct file *in,
 		if (ret < 0)
 			break;
 		else if (!ret) {
-			if (spliced)
-				break;
-			if (flags & SPLICE_F_NONBLOCK) {
+			if (flags & SPLICE_F_NONBLOCK)
 				ret = -EAGAIN;
-				break;
-			}
+			break;
 		}
 
 		*ppos += ret;
diff --git a/kernel/sched.c b/kernel/sched.c
index 9b1e79371c20..e4bb1dd7b308 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1453,9 +1453,10 @@ static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd);
 static unsigned long cpu_avg_load_per_task(int cpu)
 {
 	struct rq *rq = cpu_rq(cpu);
+	unsigned long nr_running = ACCESS_ONCE(rq->nr_running);
 
-	if (rq->nr_running)
-		rq->avg_load_per_task = rq->load.weight / rq->nr_running;
+	if (nr_running)
+		rq->avg_load_per_task = rq->load.weight / nr_running;
 	else
 		rq->avg_load_per_task = 0;
 
@@ -6586,7 +6587,9 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
 			req = list_entry(rq->migration_queue.next,
 					 struct migration_req, list);
 			list_del_init(&req->list);
+			spin_unlock_irq(&rq->lock);
 			complete(&req->done);
+			spin_lock_irq(&rq->lock);
 		}
 		spin_unlock_irq(&rq->lock);
 		break;
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 81787248b60f..e8ab096ddfe3 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -118,13 +118,13 @@ static u64 __update_sched_clock(struct sched_clock_data *scd, u64 now)
 
 	/*
 	 * scd->clock = clamp(scd->tick_gtod + delta,
-	 *		      max(scd->tick_gtod, scd->clock),
-	 *		      max(scd->clock, scd->tick_gtod + TICK_NSEC));
+	 * 		      max(scd->tick_gtod, scd->clock),
+	 * 		      scd->tick_gtod + TICK_NSEC);
 	 */
 
 	clock = scd->tick_gtod + delta;
 	min_clock = wrap_max(scd->tick_gtod, scd->clock);
-	max_clock = wrap_max(scd->clock, scd->tick_gtod + TICK_NSEC);
+	max_clock = scd->tick_gtod + TICK_NSEC;
 
 	clock = wrap_max(clock, min_clock);
 	clock = wrap_min(clock, max_clock);
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 3953e4aed733..dc0b3be6b7d5 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -188,7 +188,7 @@ static void check_hung_task(struct task_struct *t, unsigned long now)
 	if ((long)(now - t->last_switch_timestamp) <
 					sysctl_hung_task_timeout_secs)
 		return;
-	if (sysctl_hung_task_warnings < 0)
+	if (!sysctl_hung_task_warnings)
 		return;
 	sysctl_hung_task_warnings--;
 
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 9d048fa2d902..3d56fe7570da 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -176,6 +176,9 @@ extern struct ctl_table random_table[];
 #ifdef CONFIG_INOTIFY_USER
 extern struct ctl_table inotify_table[];
 #endif
+#ifdef CONFIG_EPOLL
+extern struct ctl_table epoll_table[];
+#endif
 
 #ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
 int sysctl_legacy_va_layout;
@@ -1325,6 +1328,13 @@ static struct ctl_table fs_table[] = {
 		.child		= inotify_table,
 	},
 #endif	
+#ifdef CONFIG_EPOLL
+	{
+		.procname	= "epoll",
+		.mode		= 0555,
+		.child		= epoll_table,
+	},
+#endif
 #endif
 	{
 		.ctl_name	= KERN_SETUID_DUMPABLE,
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index e7acfb482a68..fa05e88aa76f 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -518,6 +518,28 @@ void update_wall_time(void)
 	/* correct the clock when NTP error is too big */
 	clocksource_adjust(offset);
 
+	/*
+	 * Since in the loop above, we accumulate any amount of time
+	 * in xtime_nsec over a second into xtime.tv_sec, its possible for
+	 * xtime_nsec to be fairly small after the loop. Further, if we're
+	 * slightly speeding the clocksource up in clocksource_adjust(),
+	 * its possible the required corrective factor to xtime_nsec could
+	 * cause it to underflow.
+	 *
+	 * Now, we cannot simply roll the accumulated second back, since
+	 * the NTP subsystem has been notified via second_overflow. So
+	 * instead we push xtime_nsec forward by the amount we underflowed,
+	 * and add that amount into the error.
+	 *
+	 * We'll correct this error next time through this function, when
+	 * xtime_nsec is not as small.
+	 */
+	if (unlikely((s64)clock->xtime_nsec < 0)) {
+		s64 neg = -(s64)clock->xtime_nsec;
+		clock->xtime_nsec = 0;
+		clock->error += neg << (NTP_SCALE_SHIFT - clock->shift);
+	}
+
 	/* store full nanoseconds into xtime after rounding it up and
 	 * add the remainder to the error difference.
 	 */
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index f780e9552f91..668bbb5ef2bd 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1215,7 +1215,7 @@ ring_buffer_lock_reserve(struct ring_buffer *buffer,
 
  out:
 	if (resched)
-		preempt_enable_notrace();
+		preempt_enable_no_resched_notrace();
 	else
 		preempt_enable_notrace();
 	return NULL;
diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c
index f28484618ff0..e62cbf78eab6 100644
--- a/kernel/trace/trace_mmiotrace.c
+++ b/kernel/trace/trace_mmiotrace.c
@@ -18,12 +18,14 @@ struct header_iter {
 
 static struct trace_array *mmio_trace_array;
 static bool overrun_detected;
+static unsigned long prev_overruns;
 
 static void mmio_reset_data(struct trace_array *tr)
 {
 	int cpu;
 
 	overrun_detected = false;
+	prev_overruns = 0;
 	tr->time_start = ftrace_now(tr->cpu);
 
 	for_each_online_cpu(cpu)
@@ -128,16 +130,12 @@ static void mmio_close(struct trace_iterator *iter)
 
 static unsigned long count_overruns(struct trace_iterator *iter)
 {
-	int cpu;
 	unsigned long cnt = 0;
-/* FIXME: */
-#if 0
-	for_each_online_cpu(cpu) {
-		cnt += iter->overrun[cpu];
-		iter->overrun[cpu] = 0;
-	}
-#endif
-	(void)cpu;
+	unsigned long over = ring_buffer_overruns(iter->tr->buffer);
+
+	if (over > prev_overruns)
+		cnt = over - prev_overruns;
+	prev_overruns = over;
 	return cnt;
 }
 
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index be682b62fe58..3bdb44bde4b7 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -184,11 +184,16 @@ static struct file_operations stack_max_size_fops = {
 static void *
 t_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	long i = (long)m->private;
+	long i;
 
 	(*pos)++;
 
-	i++;
+	if (v == SEQ_START_TOKEN)
+		i = 0;
+	else {
+		i = *(long *)v;
+		i++;
+	}
 
 	if (i >= max_stack_trace.nr_entries ||
 	    stack_dump_trace[i] == ULONG_MAX)
@@ -201,12 +206,15 @@ t_next(struct seq_file *m, void *v, loff_t *pos)
 
 static void *t_start(struct seq_file *m, loff_t *pos)
 {
-	void *t = &m->private;
+	void *t = SEQ_START_TOKEN;
 	loff_t l = 0;
 
 	local_irq_disable();
 	__raw_spin_lock(&max_stack_lock);
 
+	if (*pos == 0)
+		return SEQ_START_TOKEN;
+
 	for (; t && l < *pos; t = t_next(m, t, &l))
 		;
 
@@ -235,10 +243,10 @@ static int trace_lookup_stack(struct seq_file *m, long i)
 
 static int t_show(struct seq_file *m, void *v)
 {
-	long i = *(long *)v;
+	long i;
 	int size;
 
-	if (i < 0) {
+	if (v == SEQ_START_TOKEN) {
 		seq_printf(m, "        Depth   Size      Location"
 			   "    (%d entries)\n"
 			   "        -----   ----      --------\n",
@@ -246,6 +254,8 @@ static int t_show(struct seq_file *m, void *v)
 		return 0;
 	}
 
+	i = *(long *)v;
+
 	if (i >= max_stack_trace.nr_entries ||
 	    stack_dump_trace[i] == ULONG_MAX)
 		return 0;
@@ -275,10 +285,6 @@ static int stack_trace_open(struct inode *inode, struct file *file)
 	int ret;
 
 	ret = seq_open(file, &stack_trace_seq_ops);
-	if (!ret) {
-		struct seq_file *m = file->private_data;
-		m->private = (void *)-1;
-	}
 
 	return ret;
 }
diff --git a/lib/idr.c b/lib/idr.c
index e728c7fccc4d..1c4f9281f412 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -185,6 +185,7 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa)
 			new = get_from_free_list(idp);
 			if (!new)
 				return -1;
+			new->layer = l-1;
 			rcu_assign_pointer(p->ary[m], new);
 			p->count++;
 		}
@@ -210,6 +211,7 @@ build_up:
 	if (unlikely(!p)) {
 		if (!(p = get_from_free_list(idp)))
 			return -1;
+		p->layer = 0;
 		layers = 1;
 	}
 	/*
@@ -218,8 +220,14 @@ build_up:
 	 */
 	while ((layers < (MAX_LEVEL - 1)) && (id >= (1 << (layers*IDR_BITS)))) {
 		layers++;
-		if (!p->count)
+		if (!p->count) {
+			/* special case: if the tree is currently empty,
+			 * then we grow the tree by moving the top node
+			 * upwards.
+			 */
+			p->layer++;
 			continue;
+		}
 		if (!(new = get_from_free_list(idp))) {
 			/*
 			 * The allocation failed.  If we built part of
@@ -237,6 +245,7 @@ build_up:
 		}
 		new->ary[0] = p;
 		new->count = 1;
+		new->layer = layers-1;
 		if (p->bitmap == IDR_FULL)
 			__set_bit(0, &new->bitmap);
 		p = new;
@@ -493,17 +502,21 @@ void *idr_find(struct idr *idp, int id)
 	int n;
 	struct idr_layer *p;
 
-	n = idp->layers * IDR_BITS;
 	p = rcu_dereference(idp->top);
+	if (!p)
+		return NULL;
+	n = (p->layer+1) * IDR_BITS;
 
 	/* Mask off upper bits we don't use for the search. */
 	id &= MAX_ID_MASK;
 
 	if (id >= (1 << n))
 		return NULL;
+	BUG_ON(n == 0);
 
 	while (n > 0 && p) {
 		n -= IDR_BITS;
+		BUG_ON(n != p->layer*IDR_BITS);
 		p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]);
 	}
 	return((void *)p);
@@ -582,8 +595,11 @@ void *idr_replace(struct idr *idp, void *ptr, int id)
 	int n;
 	struct idr_layer *p, *old_p;
 
-	n = idp->layers * IDR_BITS;
 	p = idp->top;
+	if (!p)
+		return ERR_PTR(-EINVAL);
+
+	n = (p->layer+1) * IDR_BITS;
 
 	id &= MAX_ID_MASK;
 
diff --git a/lib/percpu_counter.c b/lib/percpu_counter.c
index a8663890a88c..b255b939bc1b 100644
--- a/lib/percpu_counter.c
+++ b/lib/percpu_counter.c
@@ -62,10 +62,7 @@ s64 __percpu_counter_sum(struct percpu_counter *fbc)
 	for_each_online_cpu(cpu) {
 		s32 *pcount = per_cpu_ptr(fbc->counters, cpu);
 		ret += *pcount;
-		*pcount = 0;
 	}
-	fbc->count = ret;
-
 	spin_unlock(&fbc->lock);
 	return ret;
 }
@@ -104,13 +101,13 @@ void percpu_counter_destroy(struct percpu_counter *fbc)
 	if (!fbc->counters)
 		return;
 
-	free_percpu(fbc->counters);
-	fbc->counters = NULL;
 #ifdef CONFIG_HOTPLUG_CPU
 	mutex_lock(&percpu_counters_lock);
 	list_del(&fbc->list);
 	mutex_unlock(&percpu_counters_lock);
 #endif
+	free_percpu(fbc->counters);
+	fbc->counters = NULL;
 }
 EXPORT_SYMBOL(percpu_counter_destroy);
 
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index f2e574dbc300..801c08b046e6 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -176,6 +176,9 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent,
 	int ret = 0;
 	struct device *dev;
 
+	if (bdi->dev)	/* The driver needs to use separate queues per device */
+		goto exit;
+
 	va_start(args, fmt);
 	dev = device_create_vargs(bdi_class, parent, MKDEV(0, 0), bdi, fmt, args);
 	va_end(args);
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index b5b2b15085a8..b17371185468 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -189,7 +189,7 @@ static void grow_pgdat_span(struct pglist_data *pgdat, unsigned long start_pfn,
 					pgdat->node_start_pfn;
 }
 
-static int __add_zone(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_zone(struct zone *zone, unsigned long phys_start_pfn)
 {
 	struct pglist_data *pgdat = zone->zone_pgdat;
 	int nr_pages = PAGES_PER_SECTION;
@@ -216,7 +216,7 @@ static int __add_zone(struct zone *zone, unsigned long phys_start_pfn)
 	return 0;
 }
 
-static int __add_section(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_section(struct zone *zone, unsigned long phys_start_pfn)
 {
 	int nr_pages = PAGES_PER_SECTION;
 	int ret;
@@ -273,7 +273,7 @@ static int __remove_section(struct zone *zone, struct mem_section *ms)
  * call this function after deciding the zone to which to
  * add the new pages.
  */
-int __add_pages(struct zone *zone, unsigned long phys_start_pfn,
+int __ref __add_pages(struct zone *zone, unsigned long phys_start_pfn,
 		 unsigned long nr_pages)
 {
 	unsigned long i;
@@ -470,7 +470,8 @@ static void rollback_node_hotadd(int nid, pg_data_t *pgdat)
 }
 
 
-int add_memory(int nid, u64 start, u64 size)
+/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+int __ref add_memory(int nid, u64 start, u64 size)
 {
 	pg_data_t *pgdat = NULL;
 	int new_pgdat = 0;
diff --git a/mm/migrate.c b/mm/migrate.c
index 1e0d6b237f44..d8f07667fc80 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -987,25 +987,18 @@ out:
 /*
  * Determine the nodes of an array of pages and store it in an array of status.
  */
-static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages,
-			 const void __user * __user *pages,
-			 int __user *status)
+static void do_pages_stat_array(struct mm_struct *mm, unsigned long nr_pages,
+				const void __user **pages, int *status)
 {
 	unsigned long i;
-	int err;
 
 	down_read(&mm->mmap_sem);
 
 	for (i = 0; i < nr_pages; i++) {
-		const void __user *p;
-		unsigned long addr;
+		unsigned long addr = (unsigned long)(*pages);
 		struct vm_area_struct *vma;
 		struct page *page;
-
-		err = -EFAULT;
-		if (get_user(p, pages+i))
-			goto out;
-		addr = (unsigned long) p;
+		int err;
 
 		vma = find_vma(mm, addr);
 		if (!vma)
@@ -1024,12 +1017,52 @@ static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages,
 
 		err = page_to_nid(page);
 set_status:
-		put_user(err, status+i);
+		*status = err;
+
+		pages++;
+		status++;
+	}
+
+	up_read(&mm->mmap_sem);
+}
+
+/*
+ * Determine the nodes of a user array of pages and store it in
+ * a user array of status.
+ */
+static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages,
+			 const void __user * __user *pages,
+			 int __user *status)
+{
+#define DO_PAGES_STAT_CHUNK_NR 16
+	const void __user *chunk_pages[DO_PAGES_STAT_CHUNK_NR];
+	int chunk_status[DO_PAGES_STAT_CHUNK_NR];
+	unsigned long i, chunk_nr = DO_PAGES_STAT_CHUNK_NR;
+	int err;
+
+	for (i = 0; i < nr_pages; i += chunk_nr) {
+		if (chunk_nr + i > nr_pages)
+			chunk_nr = nr_pages - i;
+
+		err = copy_from_user(chunk_pages, &pages[i],
+				     chunk_nr * sizeof(*chunk_pages));
+		if (err) {
+			err = -EFAULT;
+			goto out;
+		}
+
+		do_pages_stat_array(mm, chunk_nr, chunk_pages, chunk_status);
+
+		err = copy_to_user(&status[i], chunk_status,
+				   chunk_nr * sizeof(*chunk_status));
+		if (err) {
+			err = -EFAULT;
+			goto out;
+		}
 	}
 	err = 0;
 
 out:
-	up_read(&mm->mmap_sem);
 	return err;
 }
 
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 1223d927904d..ab27ff750519 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -21,7 +21,7 @@ static unsigned long total_usage;
 #if !defined(CONFIG_SPARSEMEM)
 
 
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
 {
 	pgdat->node_page_cgroup = NULL;
 }
@@ -49,6 +49,9 @@ static int __init alloc_node_page_cgroup(int nid)
 	start_pfn = NODE_DATA(nid)->node_start_pfn;
 	nr_pages = NODE_DATA(nid)->node_spanned_pages;
 
+	if (!nr_pages)
+		return 0;
+
 	table_size = sizeof(struct page_cgroup) * nr_pages;
 
 	base = __alloc_bootmem_node_nopanic(NODE_DATA(nid),
@@ -97,7 +100,8 @@ struct page_cgroup *lookup_page_cgroup(struct page *page)
 	return section->page_cgroup + pfn;
 }
 
-int __meminit init_section_page_cgroup(unsigned long pfn)
+/* __alloc_bootmem...() is protected by !slab_available() */
+int __init_refok init_section_page_cgroup(unsigned long pfn)
 {
 	struct mem_section *section;
 	struct page_cgroup *base, *pc;
@@ -106,19 +110,29 @@ int __meminit init_section_page_cgroup(unsigned long pfn)
 
 	section = __pfn_to_section(pfn);
 
-	if (section->page_cgroup)
-		return 0;
-
-	nid = page_to_nid(pfn_to_page(pfn));
-
-	table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
-	if (slab_is_available()) {
-		base = kmalloc_node(table_size, GFP_KERNEL, nid);
-		if (!base)
-			base = vmalloc_node(table_size, nid);
-	} else {
-		base = __alloc_bootmem_node_nopanic(NODE_DATA(nid), table_size,
+	if (!section->page_cgroup) {
+		nid = page_to_nid(pfn_to_page(pfn));
+		table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
+		if (slab_is_available()) {
+			base = kmalloc_node(table_size, GFP_KERNEL, nid);
+			if (!base)
+				base = vmalloc_node(table_size, nid);
+		} else {
+			base = __alloc_bootmem_node_nopanic(NODE_DATA(nid),
+				table_size,
 				PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
+		}
+	} else {
+		/*
+ 		 * We don't have to allocate page_cgroup again, but
+		 * address of memmap may be changed. So, we have to initialize
+		 * again.
+		 */
+		base = section->page_cgroup + pfn;
+		table_size = 0;
+		/* check address of memmap is changed or not. */
+		if (base->page == pfn_to_page(pfn))
+			return 0;
 	}
 
 	if (!base) {
@@ -158,7 +172,7 @@ void __free_page_cgroup(unsigned long pfn)
 	}
 }
 
-int online_page_cgroup(unsigned long start_pfn,
+int __meminit online_page_cgroup(unsigned long start_pfn,
 			unsigned long nr_pages,
 			int nid)
 {
@@ -183,7 +197,7 @@ int online_page_cgroup(unsigned long start_pfn,
 	return -ENOMEM;
 }
 
-int offline_page_cgroup(unsigned long start_pfn,
+int __meminit offline_page_cgroup(unsigned long start_pfn,
 		unsigned long nr_pages, int nid)
 {
 	unsigned long start, end, pfn;
@@ -197,7 +211,7 @@ int offline_page_cgroup(unsigned long start_pfn,
 
 }
 
-static int page_cgroup_callback(struct notifier_block *self,
+static int __meminit page_cgroup_callback(struct notifier_block *self,
 			       unsigned long action, void *arg)
 {
 	struct memory_notify *mn = arg;
@@ -207,18 +221,23 @@ static int page_cgroup_callback(struct notifier_block *self,
 		ret = online_page_cgroup(mn->start_pfn,
 				   mn->nr_pages, mn->status_change_nid);
 		break;
-	case MEM_CANCEL_ONLINE:
 	case MEM_OFFLINE:
 		offline_page_cgroup(mn->start_pfn,
 				mn->nr_pages, mn->status_change_nid);
 		break;
+	case MEM_CANCEL_ONLINE:
 	case MEM_GOING_OFFLINE:
 		break;
 	case MEM_ONLINE:
 	case MEM_CANCEL_OFFLINE:
 		break;
 	}
-	ret = notifier_from_errno(ret);
+
+	if (ret)
+		ret = notifier_from_errno(ret);
+	else
+		ret = NOTIFY_OK;
+
 	return ret;
 }
 
@@ -248,7 +267,7 @@ void __init page_cgroup_init(void)
 	" want\n");
 }
 
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
 {
 	return;
 }
diff --git a/mm/slob.c b/mm/slob.c
index cb675d126791..bf7e8fc3aed8 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -535,7 +535,7 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size,
 	struct kmem_cache *c;
 
 	c = slob_alloc(sizeof(struct kmem_cache),
-		flags, ARCH_KMALLOC_MINALIGN, -1);
+		GFP_KERNEL, ARCH_KMALLOC_MINALIGN, -1);
 
 	if (c) {
 		c->name = name;
diff --git a/mm/slub.c b/mm/slub.c
index 7ad489af9561..a2cd47d89e0a 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2931,8 +2931,10 @@ static int slab_memory_callback(struct notifier_block *self,
 	case MEM_CANCEL_OFFLINE:
 		break;
 	}
-
-	ret = notifier_from_errno(ret);
+	if (ret)
+		ret = notifier_from_errno(ret);
+	else
+		ret = NOTIFY_OK;
 	return ret;
 }
 
@@ -3595,7 +3597,7 @@ static int list_locations(struct kmem_cache *s, char *buf,
 	for (i = 0; i < t.count; i++) {
 		struct location *l = &t.loc[i];
 
-		if (len > PAGE_SIZE - 100)
+		if (len > PAGE_SIZE - KSYM_SYMBOL_LEN - 100)
 			break;
 		len += sprintf(buf + len, "%7ld ", l->count);
 
diff --git a/mm/sparse.c b/mm/sparse.c
index 39db301b920d..083f5b63e7a8 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -570,7 +570,7 @@ static void free_section_usemap(struct page *memmap, unsigned long *usemap)
  * set.  If this is <=0, then that means that the passed-in
  * map was not consumed and must be freed.
  */
-int sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
+int __meminit sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
 			   int nr_pages)
 {
 	unsigned long section_nr = pfn_to_section_nr(start_pfn);
diff --git a/mm/swap.c b/mm/swap.c
index 2152e48a7b8f..b135ec90cdeb 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -299,7 +299,6 @@ void lru_add_drain(void)
 	put_cpu();
 }
 
-#if defined(CONFIG_NUMA) || defined(CONFIG_UNEVICTABLE_LRU)
 static void lru_add_drain_per_cpu(struct work_struct *dummy)
 {
 	lru_add_drain();
@@ -313,18 +312,6 @@ int lru_add_drain_all(void)
 	return schedule_on_each_cpu(lru_add_drain_per_cpu);
 }
 
-#else
-
-/*
- * Returns 0 for success
- */
-int lru_add_drain_all(void)
-{
-	lru_add_drain();
-	return 0;
-}
-#endif
-
 /*
  * Batched page_cache_release().  Decrement the reference count on all the
  * passed pages.  If it fell to zero then remove the page from the LRU and
@@ -445,6 +432,7 @@ void ____pagevec_lru_add(struct pagevec *pvec, enum lru_list lru)
 	for (i = 0; i < pagevec_count(pvec); i++) {
 		struct page *page = pvec->pages[i];
 		struct zone *pagezone = page_zone(page);
+		int file;
 
 		if (pagezone != zone) {
 			if (zone)
@@ -456,8 +444,12 @@ void ____pagevec_lru_add(struct pagevec *pvec, enum lru_list lru)
 		VM_BUG_ON(PageUnevictable(page));
 		VM_BUG_ON(PageLRU(page));
 		SetPageLRU(page);
-		if (is_active_lru(lru))
+		file = is_file_lru(lru);
+		zone->recent_scanned[file]++;
+		if (is_active_lru(lru)) {
 			SetPageActive(page);
+			zone->recent_rotated[file]++;
+		}
 		add_page_to_lru_list(zone, page, lru);
 	}
 	if (zone)
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 30f826d484f0..1ddb77ba3995 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -77,7 +77,6 @@ static void vunmap_page_range(unsigned long addr, unsigned long end)
 
 	BUG_ON(addr >= end);
 	pgd = pgd_offset_k(addr);
-	flush_cache_vunmap(addr, end);
 	do {
 		next = pgd_addr_end(addr, end);
 		if (pgd_none_or_clear_bad(pgd))
@@ -543,9 +542,10 @@ static void purge_vmap_area_lazy(void)
 }
 
 /*
- * Free and unmap a vmap area
+ * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been
+ * called for the correct range previously.
  */
-static void free_unmap_vmap_area(struct vmap_area *va)
+static void free_unmap_vmap_area_noflush(struct vmap_area *va)
 {
 	va->flags |= VM_LAZY_FREE;
 	atomic_add((va->va_end - va->va_start) >> PAGE_SHIFT, &vmap_lazy_nr);
@@ -553,6 +553,15 @@ static void free_unmap_vmap_area(struct vmap_area *va)
 		try_purge_vmap_area_lazy();
 }
 
+/*
+ * Free and unmap a vmap area
+ */
+static void free_unmap_vmap_area(struct vmap_area *va)
+{
+	flush_cache_vunmap(va->va_start, va->va_end);
+	free_unmap_vmap_area_noflush(va);
+}
+
 static struct vmap_area *find_vmap_area(unsigned long addr)
 {
 	struct vmap_area *va;
@@ -734,7 +743,7 @@ static void free_vmap_block(struct vmap_block *vb)
 	spin_unlock(&vmap_block_tree_lock);
 	BUG_ON(tmp != vb);
 
-	free_unmap_vmap_area(vb->va);
+	free_unmap_vmap_area_noflush(vb->va);
 	call_rcu(&vb->rcu_head, rcu_free_vb);
 }
 
@@ -796,6 +805,9 @@ static void vb_free(const void *addr, unsigned long size)
 
 	BUG_ON(size & ~PAGE_MASK);
 	BUG_ON(size > PAGE_SIZE*VMAP_MAX_ALLOC);
+
+	flush_cache_vunmap((unsigned long)addr, (unsigned long)addr + size);
+
 	order = get_order(size);
 
 	offset = (unsigned long)addr & (VMAP_BLOCK_SIZE - 1);
@@ -1705,7 +1717,7 @@ static int s_show(struct seq_file *m, void *p)
 		v->addr, v->addr + v->size, v->size);
 
 	if (v->caller) {
-		char buff[2 * KSYM_NAME_LEN];
+		char buff[KSYM_SYMBOL_LEN];
 
 		seq_putc(m, ' ');
 		sprint_symbol(buff, (unsigned long)v->caller);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 7ea1440b53db..62e7f62fb559 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1248,6 +1248,7 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
 		list_add(&page->lru, &l_inactive);
 	}
 
+	spin_lock_irq(&zone->lru_lock);
 	/*
 	 * Count referenced pages from currently used mappings as
 	 * rotated, even though they are moved to the inactive list.
@@ -1263,7 +1264,6 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
 
 	pgmoved = 0;
 	lru = LRU_BASE + file * LRU_FILE;
-	spin_lock_irq(&zone->lru_lock);
 	while (!list_empty(&l_inactive)) {
 		page = lru_to_page(&l_inactive);
 		prefetchw_prev_lru_page(page, &l_inactive, flags);
diff --git a/net/atm/svc.c b/net/atm/svc.c
index de1e4f2f3a43..8fb54dc870b3 100644
--- a/net/atm/svc.c
+++ b/net/atm/svc.c
@@ -293,7 +293,10 @@ static int svc_listen(struct socket *sock,int backlog)
 		error = -EINVAL;
 		goto out;
 	}
-	vcc_insert_socket(sk);
+	if (test_bit(ATM_VF_LISTEN, &vcc->flags)) {
+		error = -EADDRINUSE;
+		goto out;
+        }
 	set_bit(ATM_VF_WAITING, &vcc->flags);
 	prepare_to_wait(sk->sk_sleep, &wait, TASK_UNINTERRUPTIBLE);
 	sigd_enq(vcc,as_listen,NULL,NULL,&vcc->local);
@@ -307,6 +310,7 @@ static int svc_listen(struct socket *sock,int backlog)
 		goto out;
 	}
 	set_bit(ATM_VF_LISTEN,&vcc->flags);
+	vcc_insert_socket(sk);
 	sk->sk_max_ack_backlog = backlog > 0 ? backlog : ATM_BACKLOG_DEFAULT;
 	error = -sk->sk_err;
 out:
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index fa5cda4e552a..45f61c348e36 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -101,6 +101,18 @@ static inline __be16 pppoe_proto(const struct sk_buff *skb)
 	 pppoe_proto(skb) == htons(PPP_IPV6) && \
 	 brnf_filter_pppoe_tagged)
 
+static void fake_update_pmtu(struct dst_entry *dst, u32 mtu)
+{
+}
+
+static struct dst_ops fake_dst_ops = {
+	.family =		AF_INET,
+	.protocol =		__constant_htons(ETH_P_IP),
+	.update_pmtu =		fake_update_pmtu,
+	.entry_size =		sizeof(struct rtable),
+	.entries =		ATOMIC_INIT(0),
+};
+
 /*
  * Initialize bogus route table used to keep netfilter happy.
  * Currently, we fill in the PMTU entry because netfilter
@@ -117,6 +129,7 @@ void br_netfilter_rtable_init(struct net_bridge *br)
 	rt->u.dst.path = &rt->u.dst;
 	rt->u.dst.metrics[RTAX_MTU - 1] = 1500;
 	rt->u.dst.flags	= DST_NOXFRM;
+	rt->u.dst.ops = &fake_dst_ops;
 }
 
 static inline struct rtable *bridge_parent_rtable(const struct net_device *dev)
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 7d4d2b3c137e..3dadb338addd 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -319,23 +319,52 @@ static struct dev_rcv_lists *find_dev_rcv_lists(struct net_device *dev)
 	return n ? d : NULL;
 }
 
+/**
+ * find_rcv_list - determine optimal filterlist inside device filter struct
+ * @can_id: pointer to CAN identifier of a given can_filter
+ * @mask: pointer to CAN mask of a given can_filter
+ * @d: pointer to the device filter struct
+ *
+ * Description:
+ *  Returns the optimal filterlist to reduce the filter handling in the
+ *  receive path. This function is called by service functions that need
+ *  to register or unregister a can_filter in the filter lists.
+ *
+ *  A filter matches in general, when
+ *
+ *          <received_can_id> & mask == can_id & mask
+ *
+ *  so every bit set in the mask (even CAN_EFF_FLAG, CAN_RTR_FLAG) describe
+ *  relevant bits for the filter.
+ *
+ *  The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can
+ *  filter for error frames (CAN_ERR_FLAG bit set in mask). For error frames
+ *  there is a special filterlist and a special rx path filter handling.
+ *
+ * Return:
+ *  Pointer to optimal filterlist for the given can_id/mask pair.
+ *  Constistency checked mask.
+ *  Reduced can_id to have a preprocessed filter compare value.
+ */
 static struct hlist_head *find_rcv_list(canid_t *can_id, canid_t *mask,
 					struct dev_rcv_lists *d)
 {
 	canid_t inv = *can_id & CAN_INV_FILTER; /* save flag before masking */
 
-	/* filter error frames */
+	/* filter for error frames in extra filterlist */
 	if (*mask & CAN_ERR_FLAG) {
-		/* clear CAN_ERR_FLAG in list entry */
+		/* clear CAN_ERR_FLAG in filter entry */
 		*mask &= CAN_ERR_MASK;
 		return &d->rx[RX_ERR];
 	}
 
-	/* ensure valid values in can_mask */
-	if (*mask & CAN_EFF_FLAG)
-		*mask &= (CAN_EFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG);
-	else
-		*mask &= (CAN_SFF_MASK | CAN_RTR_FLAG);
+	/* with cleared CAN_ERR_FLAG we have a simple mask/value filterpair */
+
+#define CAN_EFF_RTR_FLAGS (CAN_EFF_FLAG | CAN_RTR_FLAG)
+
+	/* ensure valid values in can_mask for 'SFF only' frame filtering */
+	if ((*mask & CAN_EFF_FLAG) && !(*can_id & CAN_EFF_FLAG))
+		*mask &= (CAN_SFF_MASK | CAN_EFF_RTR_FLAGS);
 
 	/* reduce condition testing at receive time */
 	*can_id &= *mask;
@@ -348,15 +377,19 @@ static struct hlist_head *find_rcv_list(canid_t *can_id, canid_t *mask,
 	if (!(*mask))
 		return &d->rx[RX_ALL];
 
-	/* use extra filterset for the subscription of exactly *ONE* can_id */
-	if (*can_id & CAN_EFF_FLAG) {
-		if (*mask == (CAN_EFF_MASK | CAN_EFF_FLAG)) {
-			/* RFC: a use-case for hash-tables in the future? */
-			return &d->rx[RX_EFF];
+	/* extra filterlists for the subscription of a single non-RTR can_id */
+	if (((*mask & CAN_EFF_RTR_FLAGS) == CAN_EFF_RTR_FLAGS)
+	    && !(*can_id & CAN_RTR_FLAG)) {
+
+		if (*can_id & CAN_EFF_FLAG) {
+			if (*mask == (CAN_EFF_MASK | CAN_EFF_RTR_FLAGS)) {
+				/* RFC: a future use-case for hash-tables? */
+				return &d->rx[RX_EFF];
+			}
+		} else {
+			if (*mask == (CAN_SFF_MASK | CAN_EFF_RTR_FLAGS))
+				return &d->rx_sff[*can_id];
 		}
-	} else {
-		if (*mask == CAN_SFF_MASK)
-			return &d->rx_sff[*can_id];
 	}
 
 	/* default: filter via can_id/can_mask */
@@ -589,7 +622,10 @@ static int can_rcv_filter(struct dev_rcv_lists *d, struct sk_buff *skb)
 		}
 	}
 
-	/* check CAN_ID specific entries */
+	/* check filterlists for single non-RTR can_ids */
+	if (can_id & CAN_RTR_FLAG)
+		return matches;
+
 	if (can_id & CAN_EFF_FLAG) {
 		hlist_for_each_entry_rcu(r, n, &d->rx[RX_EFF], list) {
 			if (r->can_id == can_id) {
diff --git a/net/can/bcm.c b/net/can/bcm.c
index d0dd382001e2..da0d426c0ce4 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -64,10 +64,11 @@
 #define BCM_CAN_DLC_MASK 0x0F /* clean private flags in can_dlc by masking */
 
 /* get best masking value for can_rx_register() for a given single can_id */
-#define REGMASK(id) ((id & CAN_RTR_FLAG) | ((id & CAN_EFF_FLAG) ? \
-			(CAN_EFF_MASK | CAN_EFF_FLAG) : CAN_SFF_MASK))
+#define REGMASK(id) ((id & CAN_EFF_FLAG) ? \
+		     (CAN_EFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG) : \
+		     (CAN_SFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG))
 
-#define CAN_BCM_VERSION "20080415"
+#define CAN_BCM_VERSION CAN_VERSION
 static __initdata const char banner[] = KERN_INFO
 	"can: broadcast manager protocol (rev " CAN_BCM_VERSION ")\n";
 
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 6c7af390be0a..dadac6281f20 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -133,9 +133,11 @@ static int poll_one_napi(struct netpoll_info *npinfo,
 
 	npinfo->rx_flags |= NETPOLL_RX_DROP;
 	atomic_inc(&trapped);
+	set_bit(NAPI_STATE_NPSVC, &napi->state);
 
 	work = napi->poll(napi, budget);
 
+	clear_bit(NAPI_STATE_NPSVC, &napi->state);
 	atomic_dec(&trapped);
 	npinfo->rx_flags &= ~NETPOLL_RX_DROP;
 
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index d49ef8301b5b..65f7757465bd 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -149,7 +149,7 @@ void skb_under_panic(struct sk_buff *skb, int sz, void *here)
 
 void skb_truesize_bug(struct sk_buff *skb)
 {
-	printk(KERN_ERR "SKB BUG: Invalid truesize (%u) "
+	WARN(net_ratelimit(), KERN_ERR "SKB BUG: Invalid truesize (%u) "
 	       "len=%u, sizeof(sk_buff)=%Zd\n",
 	       skb->truesize, skb->len, sizeof(struct sk_buff));
 }
diff --git a/net/core/sock.c b/net/core/sock.c
index 341e39456952..edf7220889a4 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -2035,9 +2035,6 @@ static inline void release_proto_idx(struct proto *prot)
 
 int proto_register(struct proto *prot, int alloc_slab)
 {
-	char *request_sock_slab_name = NULL;
-	char *timewait_sock_slab_name;
-
 	if (alloc_slab) {
 		prot->slab = kmem_cache_create(prot->name, prot->obj_size, 0,
 					       SLAB_HWCACHE_ALIGN, NULL);
@@ -2051,12 +2048,12 @@ int proto_register(struct proto *prot, int alloc_slab)
 		if (prot->rsk_prot != NULL) {
 			static const char mask[] = "request_sock_%s";
 
-			request_sock_slab_name = kmalloc(strlen(prot->name) + sizeof(mask) - 1, GFP_KERNEL);
-			if (request_sock_slab_name == NULL)
+			prot->rsk_prot->slab_name = kmalloc(strlen(prot->name) + sizeof(mask) - 1, GFP_KERNEL);
+			if (prot->rsk_prot->slab_name == NULL)
 				goto out_free_sock_slab;
 
-			sprintf(request_sock_slab_name, mask, prot->name);
-			prot->rsk_prot->slab = kmem_cache_create(request_sock_slab_name,
+			sprintf(prot->rsk_prot->slab_name, mask, prot->name);
+			prot->rsk_prot->slab = kmem_cache_create(prot->rsk_prot->slab_name,
 								 prot->rsk_prot->obj_size, 0,
 								 SLAB_HWCACHE_ALIGN, NULL);
 
@@ -2070,14 +2067,14 @@ int proto_register(struct proto *prot, int alloc_slab)
 		if (prot->twsk_prot != NULL) {
 			static const char mask[] = "tw_sock_%s";
 
-			timewait_sock_slab_name = kmalloc(strlen(prot->name) + sizeof(mask) - 1, GFP_KERNEL);
+			prot->twsk_prot->twsk_slab_name = kmalloc(strlen(prot->name) + sizeof(mask) - 1, GFP_KERNEL);
 
-			if (timewait_sock_slab_name == NULL)
+			if (prot->twsk_prot->twsk_slab_name == NULL)
 				goto out_free_request_sock_slab;
 
-			sprintf(timewait_sock_slab_name, mask, prot->name);
+			sprintf(prot->twsk_prot->twsk_slab_name, mask, prot->name);
 			prot->twsk_prot->twsk_slab =
-				kmem_cache_create(timewait_sock_slab_name,
+				kmem_cache_create(prot->twsk_prot->twsk_slab_name,
 						  prot->twsk_prot->twsk_obj_size,
 						  0, SLAB_HWCACHE_ALIGN,
 						  NULL);
@@ -2093,14 +2090,14 @@ int proto_register(struct proto *prot, int alloc_slab)
 	return 0;
 
 out_free_timewait_sock_slab_name:
-	kfree(timewait_sock_slab_name);
+	kfree(prot->twsk_prot->twsk_slab_name);
 out_free_request_sock_slab:
 	if (prot->rsk_prot && prot->rsk_prot->slab) {
 		kmem_cache_destroy(prot->rsk_prot->slab);
 		prot->rsk_prot->slab = NULL;
 	}
 out_free_request_sock_slab_name:
-	kfree(request_sock_slab_name);
+	kfree(prot->rsk_prot->slab_name);
 out_free_sock_slab:
 	kmem_cache_destroy(prot->slab);
 	prot->slab = NULL;
@@ -2123,18 +2120,14 @@ void proto_unregister(struct proto *prot)
 	}
 
 	if (prot->rsk_prot != NULL && prot->rsk_prot->slab != NULL) {
-		const char *name = kmem_cache_name(prot->rsk_prot->slab);
-
 		kmem_cache_destroy(prot->rsk_prot->slab);
-		kfree(name);
+		kfree(prot->rsk_prot->slab_name);
 		prot->rsk_prot->slab = NULL;
 	}
 
 	if (prot->twsk_prot != NULL && prot->twsk_prot->twsk_slab != NULL) {
-		const char *name = kmem_cache_name(prot->twsk_prot->twsk_slab);
-
 		kmem_cache_destroy(prot->twsk_prot->twsk_slab);
-		kfree(name);
+		kfree(prot->twsk_prot->twsk_slab_name);
 		prot->twsk_prot->twsk_slab = NULL;
 	}
 }
diff --git a/net/ipv4/netfilter/nf_nat_rule.c b/net/ipv4/netfilter/nf_nat_rule.c
index bea54a685109..8d489e746b21 100644
--- a/net/ipv4/netfilter/nf_nat_rule.c
+++ b/net/ipv4/netfilter/nf_nat_rule.c
@@ -61,7 +61,7 @@ static struct
 static struct xt_table nat_table = {
 	.name		= "nat",
 	.valid_hooks	= NAT_VALID_HOOKS,
-	.lock		= __RW_LOCK_UNLOCKED(__nat_table.lock),
+	.lock		= __RW_LOCK_UNLOCKED(nat_table.lock),
 	.me		= THIS_MODULE,
 	.af		= AF_INET,
 };
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index ba85d8831893..fe3b4bdfd251 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1028,10 +1028,6 @@ unsigned int tcp_sync_mss(struct sock *sk, u32 pmtu)
 
 /* Compute the current effective MSS, taking SACKs and IP options,
  * and even PMTU discovery events into account.
- *
- * LARGESEND note: !tcp_urg_mode is overkill, only frames up to snd_up
- * cannot be large. However, taking into account rare use of URG, this
- * is not a big flaw.
  */
 unsigned int tcp_current_mss(struct sock *sk, int large_allowed)
 {
@@ -1046,7 +1042,7 @@ unsigned int tcp_current_mss(struct sock *sk, int large_allowed)
 
 	mss_now = tp->mss_cache;
 
-	if (large_allowed && sk_can_gso(sk) && !tcp_urg_mode(tp))
+	if (large_allowed && sk_can_gso(sk))
 		doing_tso = 1;
 
 	if (dst) {
@@ -1516,6 +1512,10 @@ static int tcp_mtu_probe(struct sock *sk)
  * send_head.  This happens as incoming acks open up the remote
  * window for us.
  *
+ * LARGESEND note: !tcp_urg_mode is overkill, only frames between
+ * snd_up-64k-mss .. snd_up cannot be large. However, taking into
+ * account rare use of URG, this is not a big flaw.
+ *
  * Returns 1, if no segments are in flight and we have queued segments, but
  * cannot send anything now because of SWS or another problem.
  */
@@ -1567,7 +1567,7 @@ static int tcp_write_xmit(struct sock *sk, unsigned int mss_now, int nonagle)
 		}
 
 		limit = mss_now;
-		if (tso_segs > 1)
+		if (tso_segs > 1 && !tcp_urg_mode(tp))
 			limit = tcp_mss_split_point(sk, skb, mss_now,
 						    cwnd_quota);
 
@@ -1616,6 +1616,7 @@ void __tcp_push_pending_frames(struct sock *sk, unsigned int cur_mss,
  */
 void tcp_push_one(struct sock *sk, unsigned int mss_now)
 {
+	struct tcp_sock *tp = tcp_sk(sk);
 	struct sk_buff *skb = tcp_send_head(sk);
 	unsigned int tso_segs, cwnd_quota;
 
@@ -1630,7 +1631,7 @@ void tcp_push_one(struct sock *sk, unsigned int mss_now)
 		BUG_ON(!tso_segs);
 
 		limit = mss_now;
-		if (tso_segs > 1)
+		if (tso_segs > 1 && !tcp_urg_mode(tp))
 			limit = tcp_mss_split_point(sk, skb, mss_now,
 						    cwnd_quota);
 
diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c
index 14504dada116..a453aac91bd3 100644
--- a/net/ipv4/tcp_vegas.c
+++ b/net/ipv4/tcp_vegas.c
@@ -40,18 +40,14 @@
 
 #include "tcp_vegas.h"
 
-/* Default values of the Vegas variables, in fixed-point representation
- * with V_PARAM_SHIFT bits to the right of the binary point.
- */
-#define V_PARAM_SHIFT 1
-static int alpha = 2<<V_PARAM_SHIFT;
-static int beta  = 4<<V_PARAM_SHIFT;
-static int gamma = 1<<V_PARAM_SHIFT;
+static int alpha = 2;
+static int beta  = 4;
+static int gamma = 1;
 
 module_param(alpha, int, 0644);
-MODULE_PARM_DESC(alpha, "lower bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(alpha, "lower bound of packets in network");
 module_param(beta, int, 0644);
-MODULE_PARM_DESC(beta, "upper bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(beta, "upper bound of packets in network");
 module_param(gamma, int, 0644);
 MODULE_PARM_DESC(gamma, "limit on increase (scale by 2)");
 
@@ -172,49 +168,13 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
 		return;
 	}
 
-	/* The key players are v_beg_snd_una and v_beg_snd_nxt.
-	 *
-	 * These are so named because they represent the approximate values
-	 * of snd_una and snd_nxt at the beginning of the current RTT. More
-	 * precisely, they represent the amount of data sent during the RTT.
-	 * At the end of the RTT, when we receive an ACK for v_beg_snd_nxt,
-	 * we will calculate that (v_beg_snd_nxt - v_beg_snd_una) outstanding
-	 * bytes of data have been ACKed during the course of the RTT, giving
-	 * an "actual" rate of:
-	 *
-	 *     (v_beg_snd_nxt - v_beg_snd_una) / (rtt duration)
-	 *
-	 * Unfortunately, v_beg_snd_una is not exactly equal to snd_una,
-	 * because delayed ACKs can cover more than one segment, so they
-	 * don't line up nicely with the boundaries of RTTs.
-	 *
-	 * Another unfortunate fact of life is that delayed ACKs delay the
-	 * advance of the left edge of our send window, so that the number
-	 * of bytes we send in an RTT is often less than our cwnd will allow.
-	 * So we keep track of our cwnd separately, in v_beg_snd_cwnd.
-	 */
-
 	if (after(ack, vegas->beg_snd_nxt)) {
 		/* Do the Vegas once-per-RTT cwnd adjustment. */
-		u32 old_wnd, old_snd_cwnd;
-
-
-		/* Here old_wnd is essentially the window of data that was
-		 * sent during the previous RTT, and has all
-		 * been acknowledged in the course of the RTT that ended
-		 * with the ACK we just received. Likewise, old_snd_cwnd
-		 * is the cwnd during the previous RTT.
-		 */
-		old_wnd = (vegas->beg_snd_nxt - vegas->beg_snd_una) /
-			tp->mss_cache;
-		old_snd_cwnd = vegas->beg_snd_cwnd;
 
 		/* Save the extent of the current window so we can use this
 		 * at the end of the next RTT.
 		 */
-		vegas->beg_snd_una  = vegas->beg_snd_nxt;
 		vegas->beg_snd_nxt  = tp->snd_nxt;
-		vegas->beg_snd_cwnd = tp->snd_cwnd;
 
 		/* We do the Vegas calculations only if we got enough RTT
 		 * samples that we can be reasonably sure that we got
@@ -252,22 +212,14 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
 			 *
 			 * This is:
 			 *     (actual rate in segments) * baseRTT
-			 * We keep it as a fixed point number with
-			 * V_PARAM_SHIFT bits to the right of the binary point.
 			 */
-			target_cwnd = ((u64)old_wnd * vegas->baseRTT);
-			target_cwnd <<= V_PARAM_SHIFT;
-			do_div(target_cwnd, rtt);
+			target_cwnd = tp->snd_cwnd * vegas->baseRTT / rtt;
 
 			/* Calculate the difference between the window we had,
 			 * and the window we would like to have. This quantity
 			 * is the "Diff" from the Arizona Vegas papers.
-			 *
-			 * Again, this is a fixed point number with
-			 * V_PARAM_SHIFT bits to the right of the binary
-			 * point.
 			 */
-			diff = (old_wnd << V_PARAM_SHIFT) - target_cwnd;
+			diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT;
 
 			if (diff > gamma && tp->snd_ssthresh > 2 ) {
 				/* Going too fast. Time to slow down
@@ -282,16 +234,13 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
 				 * truncation robs us of full link
 				 * utilization.
 				 */
-				tp->snd_cwnd = min(tp->snd_cwnd,
-						   ((u32)target_cwnd >>
-						    V_PARAM_SHIFT)+1);
+				tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1);
 
 			} else if (tp->snd_cwnd <= tp->snd_ssthresh) {
 				/* Slow start.  */
 				tcp_slow_start(tp);
 			} else {
 				/* Congestion avoidance. */
-				u32 next_snd_cwnd;
 
 				/* Figure out where we would like cwnd
 				 * to be.
@@ -300,32 +249,25 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
 					/* The old window was too fast, so
 					 * we slow down.
 					 */
-					next_snd_cwnd = old_snd_cwnd - 1;
+					tp->snd_cwnd--;
 				} else if (diff < alpha) {
 					/* We don't have enough extra packets
 					 * in the network, so speed up.
 					 */
-					next_snd_cwnd = old_snd_cwnd + 1;
+					tp->snd_cwnd++;
 				} else {
 					/* Sending just as fast as we
 					 * should be.
 					 */
-					next_snd_cwnd = old_snd_cwnd;
 				}
-
-				/* Adjust cwnd upward or downward, toward the
-				 * desired value.
-				 */
-				if (next_snd_cwnd > tp->snd_cwnd)
-					tp->snd_cwnd++;
-				else if (next_snd_cwnd < tp->snd_cwnd)
-					tp->snd_cwnd--;
 			}
 
 			if (tp->snd_cwnd < 2)
 				tp->snd_cwnd = 2;
 			else if (tp->snd_cwnd > tp->snd_cwnd_clamp)
 				tp->snd_cwnd = tp->snd_cwnd_clamp;
+
+			tp->snd_ssthresh = tcp_current_ssthresh(sk);
 		}
 
 		/* Wipe the slate clean for the next RTT. */
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 172438320eec..d0f54d18e19b 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -912,8 +912,13 @@ static void ndisc_recv_na(struct sk_buff *skb)
 		   is invalid, but ndisc specs say nothing
 		   about it. It could be misconfiguration, or
 		   an smart proxy agent tries to help us :-)
+
+		   We should not print the error if NA has been
+		   received from loopback - it is just our own
+		   unsolicited advertisement.
 		 */
-		ND_PRINTK1(KERN_WARNING
+		if (skb->pkt_type != PACKET_LOOPBACK)
+			ND_PRINTK1(KERN_WARNING
 			   "ICMPv6 NA: someone advertises our address on %s!\n",
 			   ifp->idev->dev->name);
 		in6_ifa_put(ifp);
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 7fef8ea1f5ec..d254446b85b5 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -99,7 +99,7 @@ struct sta_info *sta_info_get(struct ieee80211_local *local, const u8 *addr)
 
 	sta = rcu_dereference(local->sta_hash[STA_HASH(addr)]);
 	while (sta) {
-		if (compare_ether_addr(sta->sta.addr, addr) == 0)
+		if (memcmp(sta->sta.addr, addr, ETH_ALEN) == 0)
 			break;
 		sta = rcu_dereference(sta->hnext);
 	}
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index 742f811ca416..ab4ddba874be 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -271,6 +271,7 @@ static int ieee80211_ioctl_siwmode(struct net_device *dev,
 				   __u32 *mode, char *extra)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
 	int type;
 
 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
@@ -281,6 +282,13 @@ static int ieee80211_ioctl_siwmode(struct net_device *dev,
 		type = NL80211_IFTYPE_STATION;
 		break;
 	case IW_MODE_ADHOC:
+		/* Setting ad-hoc mode on non ibss channel is not
+		 * supported.
+		 */
+		if (local->oper_channel &&
+		    (local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS))
+			return -EOPNOTSUPP;
+
 		type = NL80211_IFTYPE_ADHOC;
 		break;
 	case IW_MODE_REPEAT:
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 622d7c671cb7..233fdd2d7d21 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -305,9 +305,7 @@ void nf_conntrack_hash_insert(struct nf_conn *ct)
 	hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
 	repl_hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_REPLY].tuple);
 
-	spin_lock_bh(&nf_conntrack_lock);
 	__nf_conntrack_hash_insert(ct, hash, repl_hash);
-	spin_unlock_bh(&nf_conntrack_lock);
 }
 EXPORT_SYMBOL_GPL(nf_conntrack_hash_insert);
 
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index a040d46f85d6..5f4a6516b3b6 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1090,7 +1090,7 @@ ctnetlink_create_conntrack(struct nlattr *cda[],
 	struct nf_conn_help *help;
 	struct nf_conntrack_helper *helper;
 
-	ct = nf_conntrack_alloc(&init_net, otuple, rtuple, GFP_KERNEL);
+	ct = nf_conntrack_alloc(&init_net, otuple, rtuple, GFP_ATOMIC);
 	if (ct == NULL || IS_ERR(ct))
 		return -ENOMEM;
 
@@ -1138,7 +1138,7 @@ ctnetlink_create_conntrack(struct nlattr *cda[],
 		}
 	}
 
-	nf_ct_acct_ext_add(ct, GFP_KERNEL);
+	nf_ct_acct_ext_add(ct, GFP_ATOMIC);
 
 #if defined(CONFIG_NF_CONNTRACK_MARK)
 	if (cda[CTA_MARK])
@@ -1212,13 +1212,14 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
 			atomic_inc(&master_ct->ct_general.use);
 		}
 
-		spin_unlock_bh(&nf_conntrack_lock);
 		err = -ENOENT;
 		if (nlh->nlmsg_flags & NLM_F_CREATE)
 			err = ctnetlink_create_conntrack(cda,
 							 &otuple,
 							 &rtuple,
 							 master_ct);
+		spin_unlock_bh(&nf_conntrack_lock);
+
 		if (err < 0 && master_ct)
 			nf_ct_put(master_ct);
 
diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c
index 02a8fed21082..1acc089be7e9 100644
--- a/net/netfilter/xt_socket.c
+++ b/net/netfilter/xt_socket.c
@@ -141,7 +141,7 @@ socket_mt(const struct sk_buff *skb, const struct xt_match_param *par)
 	sk = nf_tproxy_get_sock_v4(dev_net(skb->dev), protocol,
 				   saddr, daddr, sport, dport, par->in, false);
 	if (sk != NULL) {
-		bool wildcard = (inet_sk(sk)->rcv_saddr == 0);
+		bool wildcard = (sk->sk_state != TCP_TIME_WAIT && inet_sk(sk)->rcv_saddr == 0);
 
 		nf_tproxy_put_sock(sk);
 		if (wildcard)
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index e8a5c32b0f10..8c0308032178 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -562,7 +562,6 @@ static int netlbl_unlhsh_remove_addr4(struct net *net,
 				      const struct in_addr *mask,
 				      struct netlbl_audit *audit_info)
 {
-	int ret_val = 0;
 	struct netlbl_af4list *list_entry;
 	struct netlbl_unlhsh_addr4 *entry;
 	struct audit_buffer *audit_buf;
@@ -574,9 +573,10 @@ static int netlbl_unlhsh_remove_addr4(struct net *net,
 	list_entry = netlbl_af4list_remove(addr->s_addr, mask->s_addr,
 					   &iface->addr4_list);
 	spin_unlock(&netlbl_unlhsh_lock);
-	if (list_entry == NULL)
-		ret_val = -ENOENT;
-	entry = netlbl_unlhsh_addr4_entry(list_entry);
+	if (list_entry != NULL)
+		entry = netlbl_unlhsh_addr4_entry(list_entry);
+	else
+		entry = NULL;
 
 	audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
 					      audit_info);
@@ -587,19 +587,21 @@ static int netlbl_unlhsh_remove_addr4(struct net *net,
 					  addr->s_addr, mask->s_addr);
 		if (dev != NULL)
 			dev_put(dev);
-		if (entry && security_secid_to_secctx(entry->secid,
-						      &secctx,
-						      &secctx_len) == 0) {
+		if (entry != NULL &&
+		    security_secid_to_secctx(entry->secid,
+					     &secctx, &secctx_len) == 0) {
 			audit_log_format(audit_buf, " sec_obj=%s", secctx);
 			security_release_secctx(secctx, secctx_len);
 		}
-		audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+		audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
 		audit_log_end(audit_buf);
 	}
 
-	if (ret_val == 0)
-		call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
-	return ret_val;
+	if (entry == NULL)
+		return -ENOENT;
+
+	call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
+	return 0;
 }
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
@@ -623,7 +625,6 @@ static int netlbl_unlhsh_remove_addr6(struct net *net,
 				      const struct in6_addr *mask,
 				      struct netlbl_audit *audit_info)
 {
-	int ret_val = 0;
 	struct netlbl_af6list *list_entry;
 	struct netlbl_unlhsh_addr6 *entry;
 	struct audit_buffer *audit_buf;
@@ -634,9 +635,10 @@ static int netlbl_unlhsh_remove_addr6(struct net *net,
 	spin_lock(&netlbl_unlhsh_lock);
 	list_entry = netlbl_af6list_remove(addr, mask, &iface->addr6_list);
 	spin_unlock(&netlbl_unlhsh_lock);
-	if (list_entry == NULL)
-		ret_val = -ENOENT;
-	entry = netlbl_unlhsh_addr6_entry(list_entry);
+	if (list_entry != NULL)
+		entry = netlbl_unlhsh_addr6_entry(list_entry);
+	else
+		entry = NULL;
 
 	audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
 					      audit_info);
@@ -647,19 +649,21 @@ static int netlbl_unlhsh_remove_addr6(struct net *net,
 					  addr, mask);
 		if (dev != NULL)
 			dev_put(dev);
-		if (entry && security_secid_to_secctx(entry->secid,
-						      &secctx,
-						      &secctx_len) == 0) {
+		if (entry != NULL &&
+		    security_secid_to_secctx(entry->secid,
+					     &secctx, &secctx_len) == 0) {
 			audit_log_format(audit_buf, " sec_obj=%s", secctx);
 			security_release_secctx(secctx, secctx_len);
 		}
-		audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+		audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
 		audit_log_end(audit_buf);
 	}
 
-	if (ret_val == 0)
-		call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
-	return ret_val;
+	if (entry == NULL)
+		return -ENOENT;
+
+	call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
+	return 0;
 }
 #endif /* IPv6 */
 
diff --git a/net/phonet/pep-gprs.c b/net/phonet/pep-gprs.c
index 9978afbd9f2a..803eeef0aa85 100644
--- a/net/phonet/pep-gprs.c
+++ b/net/phonet/pep-gprs.c
@@ -155,12 +155,13 @@ static void gprs_data_ready(struct sock *sk, int len)
 static void gprs_write_space(struct sock *sk)
 {
 	struct gprs_dev *dev = sk->sk_user_data;
+	struct net_device *net = dev->net;
 	unsigned credits = pep_writeable(sk);
 
 	spin_lock_bh(&dev->tx_lock);
 	dev->tx_max = credits;
-	if (credits > skb_queue_len(&dev->tx_queue))
-		netif_wake_queue(dev->net);
+	if (credits > skb_queue_len(&dev->tx_queue) && netif_running(net))
+		netif_wake_queue(net);
 	spin_unlock_bh(&dev->tx_lock);
 }
 
@@ -168,6 +169,23 @@ static void gprs_write_space(struct sock *sk)
  * Network device callbacks
  */
 
+static int gprs_open(struct net_device *dev)
+{
+	struct gprs_dev *gp = netdev_priv(dev);
+
+	gprs_write_space(gp->sk);
+	return 0;
+}
+
+static int gprs_close(struct net_device *dev)
+{
+	struct gprs_dev *gp = netdev_priv(dev);
+
+	netif_stop_queue(dev);
+	flush_work(&gp->tx_work);
+	return 0;
+}
+
 static int gprs_xmit(struct sk_buff *skb, struct net_device *net)
 {
 	struct gprs_dev *dev = netdev_priv(net);
@@ -254,6 +272,8 @@ static void gprs_setup(struct net_device *net)
 	net->tx_queue_len	= 10;
 
 	net->destructor		= free_netdev;
+	net->open		= gprs_open;
+	net->stop		= gprs_close;
 	net->hard_start_xmit	= gprs_xmit; /* mandatory */
 	net->change_mtu		= gprs_set_mtu;
 	net->get_stats		= gprs_get_stats;
@@ -318,7 +338,6 @@ int gprs_attach(struct sock *sk)
 	dev->sk = sk;
 
 	printk(KERN_DEBUG"%s: attached\n", net->name);
-	gprs_write_space(sk); /* kick off TX */
 	return net->ifindex;
 
 out_rel:
@@ -341,7 +360,5 @@ void gprs_detach(struct sock *sk)
 
 	printk(KERN_DEBUG"%s: detached\n", net->name);
 	unregister_netdev(net);
-	flush_scheduled_work();
 	sock_put(sk);
-	skb_queue_purge(&dev->tx_queue);
 }
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index 53be9fc82aaa..f93ff8ef47d0 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -115,7 +115,7 @@ int phonet_address_del(struct net_device *dev, u8 addr)
 	pnd = __phonet_get(dev);
 	if (!pnd || !test_and_clear_bit(addr >> 2, pnd->addrs))
 		err = -EADDRNOTAVAIL;
-	if (bitmap_empty(pnd->addrs, 64))
+	else if (bitmap_empty(pnd->addrs, 64))
 		__phonet_device_free(pnd);
 	spin_unlock_bh(&pndevs.lock);
 	return err;
diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index b1770d66bc8d..242fe8f8c322 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -123,6 +123,7 @@ nla_put_failure:
 
 static int getaddr_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
 {
+	struct net *net = sock_net(skb->sk);
 	struct phonet_device *pnd;
 	int dev_idx = 0, dev_start_idx = cb->args[0];
 	int addr_idx = 0, addr_start_idx = cb->args[1];
@@ -131,6 +132,8 @@ static int getaddr_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
 	list_for_each_entry(pnd, &pndevs.list, list) {
 		u8 addr;
 
+		if (!net_eq(dev_net(pnd->netdev), net))
+			continue;
 		if (dev_idx > dev_start_idx)
 			addr_start_idx = 0;
 		if (dev_idx++ < dev_start_idx)
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index a7f1ce11bc22..0c1cc7612800 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -1072,6 +1072,10 @@ static int rose_sendmsg(struct kiocb *iocb, struct socket *sock,
 	unsigned char *asmptr;
 	int n, size, qbit = 0;
 
+	/* ROSE empty frame has no meaning : don't send */
+	if (len == 0)
+		return 0;
+
 	if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_EOR|MSG_CMSG_COMPAT))
 		return -EINVAL;
 
@@ -1265,6 +1269,12 @@ static int rose_recvmsg(struct kiocb *iocb, struct socket *sock,
 	skb_reset_transport_header(skb);
 	copied     = skb->len;
 
+	/* ROSE empty frame has no meaning : ignore it */
+	if (copied == 0) {
+		skb_free_datagram(sk, skb);
+		return copied;
+	}
+
 	if (copied > size) {
 		copied = size;
 		msg->msg_flags |= MSG_TRUNC;
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index a11959908d9a..98402f0efa47 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -46,9 +46,6 @@
 	 layering other disciplines.  It does not need to do bandwidth
 	 control either since that can be handled by using token
 	 bucket or other rate control.
-
-	 The simulator is limited by the Linux timer resolution
-	 and will create packet bursts on the HZ boundary (1ms).
 */
 
 struct netem_sched_data {
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 95293f549e9c..a1951dcc5776 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -1183,7 +1183,11 @@ int svc_addsock(struct svc_serv *serv,
 	else if (so->state > SS_UNCONNECTED)
 		err = -EISCONN;
 	else {
-		svsk = svc_setup_socket(serv, so, &err, SVC_SOCK_DEFAULTS);
+		if (!try_module_get(THIS_MODULE))
+			err = -ENOENT;
+		else
+			svsk = svc_setup_socket(serv, so, &err,
+						SVC_SOCK_DEFAULTS);
 		if (svsk) {
 			struct sockaddr_storage addr;
 			struct sockaddr *sin = (struct sockaddr *)&addr;
@@ -1196,7 +1200,8 @@ int svc_addsock(struct svc_serv *serv,
 			spin_unlock_bh(&serv->sv_lock);
 			svc_xprt_received(&svsk->sk_xprt);
 			err = 0;
-		}
+		} else
+			module_put(THIS_MODULE);
 	}
 	if (err) {
 		sockfd_put(so);
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index eb90f77bb0e2..66d5ac4773ab 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1343,6 +1343,7 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock,
 
 	if (NULL == siocb->scm)
 		siocb->scm = &tmp_scm;
+	wait_for_unix_gc();
 	err = scm_send(sock, msg, siocb->scm);
 	if (err < 0)
 		return err;
@@ -1493,6 +1494,7 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock,
 
 	if (NULL == siocb->scm)
 		siocb->scm = &tmp_scm;
+	wait_for_unix_gc();
 	err = scm_send(sock, msg, siocb->scm);
 	if (err < 0)
 		return err;
diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index 6d4a9a8de5ef..abb3ab34cb1e 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -80,6 +80,7 @@
 #include <linux/file.h>
 #include <linux/proc_fs.h>
 #include <linux/mutex.h>
+#include <linux/wait.h>
 
 #include <net/sock.h>
 #include <net/af_unix.h>
@@ -91,6 +92,7 @@
 static LIST_HEAD(gc_inflight_list);
 static LIST_HEAD(gc_candidates);
 static DEFINE_SPINLOCK(unix_gc_lock);
+static DECLARE_WAIT_QUEUE_HEAD(unix_gc_wait);
 
 unsigned int unix_tot_inflight;
 
@@ -266,12 +268,16 @@ static void inc_inflight_move_tail(struct unix_sock *u)
 		list_move_tail(&u->link, &gc_candidates);
 }
 
-/* The external entry point: unix_gc() */
+static bool gc_in_progress = false;
 
-void unix_gc(void)
+void wait_for_unix_gc(void)
 {
-	static bool gc_in_progress = false;
+	wait_event(unix_gc_wait, gc_in_progress == false);
+}
 
+/* The external entry point: unix_gc() */
+void unix_gc(void)
+{
 	struct unix_sock *u;
 	struct unix_sock *next;
 	struct sk_buff_head hitlist;
@@ -376,6 +382,7 @@ void unix_gc(void)
 	/* All candidates should have been detached by now. */
 	BUG_ON(!list_empty(&gc_candidates));
 	gc_in_progress = false;
+	wake_up(&unix_gc_wait);
 
  out:
 	spin_unlock(&unix_gc_lock);
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 626dbb688499..eb3b1a9f9b12 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -343,9 +343,9 @@ static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by,
 				return 0;
 			return -EALREADY;
 		}
-		if (WARN_ON(!is_alpha2_set(alpha2) || !is_an_alpha2(alpha2)),
+		if (WARN(!is_alpha2_set(alpha2) || !is_an_alpha2(alpha2),
 				"Invalid Country IE regulatory hint passed "
-				"to the wireless core\n")
+				"to the wireless core\n"))
 			return -EINVAL;
 		/* We ignore Country IE hints for now, as we haven't yet
 		 * added the dot11MultiDomainCapabilityEnabled flag
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 058f04f54b90..fb216c9adf86 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -817,6 +817,7 @@ int xfrm_policy_flush(u8 type, struct xfrm_audit *audit_info)
 				continue;
 			hlist_del(&pol->bydst);
 			hlist_del(&pol->byidx);
+			list_del(&pol->walk.all);
 			write_unlock_bh(&xfrm_policy_lock);
 
 			xfrm_audit_policy_delete(pol, 1, audit_info->loginuid,
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index a53e2fc8dfb5..d27aad78e1d8 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -378,6 +378,10 @@ sub dump_section {
 #	print STDERR "parameter def '$1' = '$contents'\n";
 	$name = $1;
 	$parameterdescs{$name} = $contents;
+    } elsif ($name eq "@\.\.\.") {
+#	print STDERR "parameter def '...' = '$contents'\n";
+	$name = "...";
+	$parameterdescs{$name} = $contents;
     } else {
 #	print STDERR "other section '$name' = '$contents'\n";
 	if (defined($sections{$name}) && ($sections{$name} ne "")) {
@@ -1588,12 +1592,12 @@ sub push_parameter($$$) {
 
 	if ($type eq "" && $param =~ /\.\.\.$/)
 	{
-	    $type="";
-	    $parameterdescs{$param} = "variable arguments";
+	    if (!defined $parameterdescs{$param} || $parameterdescs{$param} eq "") {
+		$parameterdescs{$param} = "variable arguments";
+	    }
 	}
 	elsif ($type eq "" && ($param eq "" or $param eq "void"))
 	{
-	    $type="";
 	    $param="void";
 	    $parameterdescs{void} = "no arguments";
 	}
diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c
index c47842fad657..2c63bb9da74a 100644
--- a/sound/oss/waveartist.c
+++ b/sound/oss/waveartist.c
@@ -1483,16 +1483,14 @@ static void __exit unload_waveartist(struct address_info *hw)
 #define VNC_HANDSET_DETECT	0x40
 #define VNC_DISABLE_AUTOSWITCH	0x80
 
-extern spinlock_t gpio_lock;
-
 static inline void
 vnc_mute_spkr(wavnc_info *devc)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&gpio_lock, flags);
-	cpld_modify(CPLD_UNMUTE, devc->spkr_mute_state ? 0 : CPLD_UNMUTE);
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	spin_lock_irqsave(&nw_gpio_lock, flags);
+	nw_cpld_modify(CPLD_UNMUTE, devc->spkr_mute_state ? 0 : CPLD_UNMUTE);
+	spin_unlock_irqrestore(&nw_gpio_lock, flags);
 }
 
 static void
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index ba1ab737b55f..eb9164176dab 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1436,12 +1436,12 @@ static void set_dig_out(struct hda_codec *codec, hda_nid_t nid,
 {
 	hda_nid_t *d;
 
-	snd_hda_codec_write(codec, nid, 0, verb, val);
+	snd_hda_codec_write_cache(codec, nid, 0, verb, val);
 	d = codec->slave_dig_outs;
 	if (!d)
 		return;
 	for (; *d; d++)
-		snd_hda_codec_write(codec, *d, 0, verb, val);
+		snd_hda_codec_write_cache(codec, *d, 0, verb, val);
 }
 
 static inline void set_dig_out_convert(struct hda_codec *codec, hda_nid_t nid,
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 9563b5bbb272..5dd3e89f620a 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -70,7 +70,9 @@ enum {
 
 enum {
 	STAC_92HD73XX_REF,
-	STAC_DELL_M6,
+	STAC_DELL_M6_AMIC,
+	STAC_DELL_M6_DMIC,
+	STAC_DELL_M6_BOTH,
 	STAC_DELL_EQ,
 	STAC_92HD73XX_MODELS
 };
@@ -84,6 +86,7 @@ enum {
 	STAC_92HD71BXX_REF,
 	STAC_DELL_M4_1,
 	STAC_DELL_M4_2,
+	STAC_DELL_M4_3,
 	STAC_HP_M4,
 	STAC_92HD71BXX_MODELS
 };
@@ -137,6 +140,7 @@ struct sigmatel_spec {
 	unsigned int num_mixers;
 
 	int board_config;
+	unsigned int eapd_switch: 1;
 	unsigned int surr_switch: 1;
 	unsigned int line_switch: 1;
 	unsigned int mic_switch: 1;
@@ -1600,13 +1604,17 @@ static unsigned int dell_m6_pin_configs[13] = {
 
 static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
 	[STAC_92HD73XX_REF]	= ref92hd73xx_pin_configs,
-	[STAC_DELL_M6]	= dell_m6_pin_configs,
+	[STAC_DELL_M6_AMIC]	= dell_m6_pin_configs,
+	[STAC_DELL_M6_DMIC]	= dell_m6_pin_configs,
+	[STAC_DELL_M6_BOTH]	= dell_m6_pin_configs,
 	[STAC_DELL_EQ]	= dell_m6_pin_configs,
 };
 
 static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
 	[STAC_92HD73XX_REF] = "ref",
-	[STAC_DELL_M6] = "dell-m6",
+	[STAC_DELL_M6_AMIC] = "dell-m6-amic",
+	[STAC_DELL_M6_DMIC] = "dell-m6-dmic",
+	[STAC_DELL_M6_BOTH] = "dell-m6",
 	[STAC_DELL_EQ] = "dell-eq",
 };
 
@@ -1615,19 +1623,23 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 				"DFI LanParty", STAC_92HD73XX_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254,
-				"unknown Dell", STAC_DELL_M6),
+				"Dell Studio 1535", STAC_DELL_M6_DMIC),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255,
-				"unknown Dell", STAC_DELL_M6),
+				"unknown Dell", STAC_DELL_M6_DMIC),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0256,
-				"unknown Dell", STAC_DELL_M6),
+				"unknown Dell", STAC_DELL_M6_BOTH),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0257,
-				"unknown Dell", STAC_DELL_M6),
+				"unknown Dell", STAC_DELL_M6_BOTH),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025e,
-				"unknown Dell", STAC_DELL_M6),
+				"unknown Dell", STAC_DELL_M6_AMIC),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025f,
-				"unknown Dell", STAC_DELL_M6),
+				"unknown Dell", STAC_DELL_M6_AMIC),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0271,
-				"unknown Dell", STAC_DELL_M6),
+				"unknown Dell", STAC_DELL_M6_DMIC),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0272,
+				"unknown Dell", STAC_DELL_M6_DMIC),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f,
+				"Dell Studio 1537", STAC_DELL_M6_DMIC),
 	{} /* terminator */
 };
 
@@ -1670,10 +1682,17 @@ static unsigned int dell_m4_2_pin_configs[11] = {
 	0x40f000f0, 0x044413b0, 0x044413b0,
 };
 
+static unsigned int dell_m4_3_pin_configs[11] = {
+	0x0421101f, 0x04a11221, 0x90a70330, 0x90170110,
+	0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a000f0,
+	0x40f000f0, 0x044413b0, 0x044413b0,
+};
+
 static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
 	[STAC_92HD71BXX_REF] = ref92hd71bxx_pin_configs,
 	[STAC_DELL_M4_1]	= dell_m4_1_pin_configs,
 	[STAC_DELL_M4_2]	= dell_m4_2_pin_configs,
+	[STAC_DELL_M4_3]	= dell_m4_3_pin_configs,
 	[STAC_HP_M4]		= NULL,
 };
 
@@ -1681,6 +1700,7 @@ static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = {
 	[STAC_92HD71BXX_REF] = "ref",
 	[STAC_DELL_M4_1] = "dell-m4-1",
 	[STAC_DELL_M4_2] = "dell-m4-2",
+	[STAC_DELL_M4_3] = "dell-m4-3",
 	[STAC_HP_M4] = "hp-m4",
 };
 
@@ -1716,6 +1736,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
 				"unknown Dell", STAC_DELL_M4_2),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0264,
 				"unknown Dell", STAC_DELL_M4_2),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02aa,
+				"unknown Dell", STAC_DELL_M4_3),
 	{} /* terminator */
 };
 
@@ -2877,7 +2899,7 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
 			cfg->hp_outs && !spec->multiout.hp_nid)
 		spec->multiout.hp_nid = nid;
 
-	if (cfg->hp_outs > 1) {
+	if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) {
 		err = stac92xx_add_control(spec,
 			STAC_CTL_WIDGET_HP_SWITCH,
 			"Headphone as Line Out Switch",
@@ -3683,10 +3705,14 @@ static void stac92xx_power_down(struct hda_codec *codec)
 					AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
 }
 
+static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid,
+				  int enable);
+
 static int stac92xx_init(struct hda_codec *codec)
 {
 	struct sigmatel_spec *spec = codec->spec;
 	struct auto_pin_cfg *cfg = &spec->autocfg;
+	unsigned int gpio;
 	int i;
 
 	snd_hda_sequence_write(codec, spec->init);
@@ -3697,6 +3723,16 @@ static int stac92xx_init(struct hda_codec *codec)
 			snd_hda_codec_write_cache(codec,
 				spec->adc_nids[i], 0,
 				AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+
+	/* set up GPIO */
+	gpio = spec->gpio_data;
+	/* turn on EAPD statically when spec->eapd_switch isn't set.
+	 * otherwise, unsol event will turn it on/off dynamically
+	 */
+	if (!spec->eapd_switch)
+		gpio |= spec->eapd_mask;
+	stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, gpio);
+
 	/* set up pins */
 	if (spec->hp_detect) {
 		/* Enable unsolicited responses on the HP widget */
@@ -3736,39 +3772,43 @@ static int stac92xx_init(struct hda_codec *codec)
 	for (i = 0; i < spec->num_dmics; i++)
 		stac92xx_auto_set_pinctl(codec, spec->dmic_nids[i],
 					AC_PINCTL_IN_EN);
+	if (cfg->dig_out_pin)
+		stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
+					 AC_PINCTL_OUT_EN);
+	if (cfg->dig_in_pin)
+		stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin,
+					 AC_PINCTL_IN_EN);
 	for (i = 0; i < spec->num_pwrs; i++)  {
-		int event = is_nid_hp_pin(cfg, spec->pwr_nids[i])
-					? STAC_HP_EVENT : STAC_PWR_EVENT;
-		int pinctl = snd_hda_codec_read(codec, spec->pwr_nids[i],
-					0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
-		int def_conf = snd_hda_codec_read(codec, spec->pwr_nids[i],
-					0, AC_VERB_GET_CONFIG_DEFAULT, 0);
-		def_conf = get_defcfg_connect(def_conf);
+		hda_nid_t nid = spec->pwr_nids[i];
+		int pinctl, def_conf;
+		int event = STAC_PWR_EVENT;
+
+		if (is_nid_hp_pin(cfg, nid) && spec->hp_detect)
+			continue; /* already has an unsol event */
+
+		pinctl = snd_hda_codec_read(codec, nid, 0,
+					    AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
 		/* outputs are only ports capable of power management
 		 * any attempts on powering down a input port cause the
 		 * referenced VREF to act quirky.
 		 */
 		if (pinctl & AC_PINCTL_IN_EN)
 			continue;
+		def_conf = snd_hda_codec_read(codec, nid, 0,
+					      AC_VERB_GET_CONFIG_DEFAULT, 0);
+		def_conf = get_defcfg_connect(def_conf);
 		/* skip any ports that don't have jacks since presence
  		 * detection is useless */
-		if (def_conf && def_conf != AC_JACK_PORT_FIXED)
+		if (def_conf != AC_JACK_PORT_COMPLEX) {
+			if (def_conf != AC_JACK_PORT_NONE)
+				stac_toggle_power_map(codec, nid, 1);
 			continue;
+		}
 		enable_pin_detect(codec, spec->pwr_nids[i], event | i);
 		codec->patch_ops.unsol_event(codec, (event | i) << 26);
 	}
 	if (spec->dac_list)
 		stac92xx_power_down(codec);
-	if (cfg->dig_out_pin)
-		stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
-					 AC_PINCTL_OUT_EN);
-	if (cfg->dig_in_pin)
-		stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin,
-					 AC_PINCTL_IN_EN);
-
-	stac_gpio_set(codec, spec->gpio_mask,
-					spec->gpio_dir, spec->gpio_data);
-
 	return 0;
 }
 
@@ -3901,7 +3941,7 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res)
 		for (i = 0; i < cfg->speaker_outs; i++)
 			stac92xx_reset_pinctl(codec, cfg->speaker_pins[i],
 						AC_PINCTL_OUT_EN);
-		if (spec->eapd_mask)
+		if (spec->eapd_mask && spec->eapd_switch)
 			stac_gpio_set(codec, spec->gpio_mask,
 				spec->gpio_dir, spec->gpio_data &
 				~spec->eapd_mask);
@@ -3916,7 +3956,7 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res)
 		for (i = 0; i < cfg->speaker_outs; i++)
 			stac92xx_set_pinctl(codec, cfg->speaker_pins[i],
 						AC_PINCTL_OUT_EN);
-		if (spec->eapd_mask)
+		if (spec->eapd_mask && spec->eapd_switch)
 			stac_gpio_set(codec, spec->gpio_mask,
 				spec->gpio_dir, spec->gpio_data |
 				spec->eapd_mask);
@@ -3933,14 +3973,18 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res)
 	}
 } 
 
-static void stac92xx_pin_sense(struct hda_codec *codec, int idx)
+static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid,
+				  int enable)
 {
 	struct sigmatel_spec *spec = codec->spec;
-	hda_nid_t nid = spec->pwr_nids[idx];
-	int presence, val;
-	val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0)
-							& 0x000000ff;
-	presence = get_hp_pin_presence(codec, nid);
+	unsigned int idx, val;
+
+	for (idx = 0; idx < spec->num_pwrs; idx++) {
+		if (spec->pwr_nids[idx] == nid)
+			break;
+	}
+	if (idx >= spec->num_pwrs)
+		return;
 
 	/* several codecs have two power down bits */
 	if (spec->pwr_mapping)
@@ -3948,14 +3992,20 @@ static void stac92xx_pin_sense(struct hda_codec *codec, int idx)
 	else
 		idx = 1 << idx;
 
-	if (presence)
+	val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) & 0xff;
+	if (enable)
 		val &= ~idx;
 	else
 		val |= idx;
 
 	/* power down unused output ports */
 	snd_hda_codec_write(codec, codec->afg, 0, 0x7ec, val);
-};
+}
+
+static void stac92xx_pin_sense(struct hda_codec *codec, hda_nid_t nid)
+{
+	stac_toggle_power_map(codec, nid, get_hp_pin_presence(codec, nid));
+}
 
 static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res)
 {
@@ -4239,31 +4289,29 @@ again:
 	case STAC_DELL_EQ:
 		spec->init = dell_eq_core_init;
 		/* fallthru */
-	case STAC_DELL_M6:
+	case STAC_DELL_M6_AMIC:
+	case STAC_DELL_M6_DMIC:
+	case STAC_DELL_M6_BOTH:
 		spec->num_smuxes = 0;
 		spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER];
 		spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
+		spec->eapd_switch = 0;
 		spec->num_amps = 1;
 
 		if (!spec->init)
 			spec->init = dell_m6_core_init;
-		switch (codec->subsystem_id) {
-		case 0x1028025e: /* Analog Mics */
-		case 0x1028025f:
+		switch (spec->board_config) {
+		case STAC_DELL_M6_AMIC: /* Analog Mics */
 			stac92xx_set_config_reg(codec, 0x0b, 0x90A70170);
 			spec->num_dmics = 0;
 			spec->private_dimux.num_items = 1;
 			break;
-		case 0x10280271: /* Digital Mics */
-		case 0x10280272:
-		case 0x10280254:
-		case 0x10280255:
+		case STAC_DELL_M6_DMIC: /* Digital Mics */
 			stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
 			spec->num_dmics = 1;
 			spec->private_dimux.num_items = 2;
 			break;
-		case 0x10280256: /* Both */
-		case 0x10280057:
+		case STAC_DELL_M6_BOTH: /* Both */
 			stac92xx_set_config_reg(codec, 0x0b, 0x90A70170);
 			stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
 			spec->num_dmics = 1;
@@ -4274,6 +4322,7 @@ again:
 	default:
 		spec->num_dmics = STAC92HD73XX_NUM_DMICS;
 		spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
+		spec->eapd_switch = 1;
 	}
 	if (spec->board_config > STAC_92HD73XX_REF) {
 		/* GPIO0 High = Enable EAPD */
@@ -4419,7 +4468,13 @@ static int stac92hd71xx_resume(struct hda_codec *codec)
 
 static int stac92hd71xx_suspend(struct hda_codec *codec, pm_message_t state)
 {
+	struct sigmatel_spec *spec = codec->spec;
+
 	stac92hd71xx_set_power_state(codec, AC_PWRST_D3);
+	if (spec->eapd_mask)
+		stac_gpio_set(codec, spec->gpio_mask,
+				spec->gpio_dir, spec->gpio_data &
+				~spec->eapd_mask);
 	return 0;
 };
 
@@ -4562,14 +4617,21 @@ again:
 
 	switch (spec->board_config) {
 	case STAC_HP_M4:
-		spec->num_dmics = 0;
-		spec->num_smuxes = 0;
-		spec->num_dmuxes = 0;
-
 		/* enable internal microphone */
 		stac92xx_set_config_reg(codec, 0x0e, 0x01813040);
 		stac92xx_auto_set_pinctl(codec, 0x0e,
 			AC_PINCTL_IN_EN | AC_PINCTL_VREF_80);
+		/* fallthru */
+	case STAC_DELL_M4_2:
+		spec->num_dmics = 0;
+		spec->num_smuxes = 0;
+		spec->num_dmuxes = 0;
+		break;
+	case STAC_DELL_M4_1:
+	case STAC_DELL_M4_3:
+		spec->num_dmics = 1;
+		spec->num_smuxes = 0;
+		spec->num_dmuxes = 0;
 		break;
 	default:
 		spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
@@ -4806,6 +4868,7 @@ static int patch_stac927x(struct hda_codec *codec)
 	spec->num_pwrs = 0;
 	spec->aloopback_mask = 0x40;
 	spec->aloopback_shift = 0;
+	spec->eapd_switch = 1;
 
 	err = stac92xx_parse_auto_config(codec, 0x1e, 0x20);
 	if (!err) {
@@ -4886,6 +4949,7 @@ static int patch_stac9205(struct hda_codec *codec)
 
 	spec->aloopback_mask = 0x40;
 	spec->aloopback_shift = 0;
+	spec->eapd_switch = 1;
 	spec->multiout.dac_nids = spec->dac_nids;
 	
 	switch (spec->board_config){
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index bba9546ba5f5..8d73edc56102 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -20,7 +20,8 @@ config SND_SOC_MPC8610_HPCD
 
 config SND_SOC_MPC5200_I2S
 	tristate "Freescale MPC5200 PSC in I2S mode driver"
+	depends on SND_SOC && PPC_MPC52xx && PPC_BESTCOMM
 	select SND_SOC_OF_SIMPLE
-	depends on SND_SOC && PPC_MPC52xx
+	select PPC_BESTCOMM_GEN_BD
 	help
 	  Say Y here to support the MPC5200 PSCs in I2S mode.
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
index 19c5c3cf5d8c..c473a3b97b55 100644
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ b/sound/soc/s3c24xx/s3c2443-ac97.c
@@ -28,7 +28,7 @@
 #include <sound/soc.h>
 
 #include <mach/hardware.h>
-#include <asm/plat-s3c/regs-ac97.h>
+#include <plat/regs-ac97.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 #include <mach/audio.h>
diff --git a/sound/sound_core.c b/sound/sound_core.c
index a75b289a5d78..10ba4218161b 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -457,7 +457,7 @@ EXPORT_SYMBOL(unregister_sound_mixer);
 
 void unregister_sound_midi(int unit)
 {
-	return sound_remove_unit(&chains[2], unit);
+	sound_remove_unit(&chains[2], unit);
 }
 
 EXPORT_SYMBOL(unregister_sound_midi);
@@ -474,7 +474,7 @@ EXPORT_SYMBOL(unregister_sound_midi);
 
 void unregister_sound_dsp(int unit)
 {
-	return sound_remove_unit(&chains[3], unit);
+	sound_remove_unit(&chains[3], unit);
 }
 
 
@@ -507,7 +507,7 @@ static struct sound_unit *__look_for_unit(int chain, int unit)
 	return NULL;
 }
 
-int soundcore_open(struct inode *inode, struct file *file)
+static int soundcore_open(struct inode *inode, struct file *file)
 {
 	int chain;
 	int unit = iminor(inode);