diff options
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-tx6.dtsi | 23 |
1 files changed, 17 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index a50bf71a4431..f2cd3e77c536 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -1,5 +1,5 @@ /* - * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de> + * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -241,7 +241,7 @@ &fec { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; + pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>, @@ -261,8 +261,9 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_mdio>; - interrupts-extended = <&gpio7 1 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&pinctrl_etnphy_int>; + interrupt-parent = <&gpio7>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; }; }; }; @@ -334,8 +335,6 @@ pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ >; }; @@ -453,12 +452,24 @@ >; }; + pinctrl_etnphy_int: etnphy-intgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ + >; + }; + pinctrl_etnphy_power: etnphy-pwrgrp { fsl,pins = < MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */ >; }; + pinctrl_etnphy_rst: etnphy-rstgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 |