diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-01-06 16:50:35 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-01-06 16:50:35 -0800 |
| commit | 3c0cb7c31c206aaedb967e44b98442bbeb17a6c4 (patch) | |
| tree | 3ecba45d7ffae4fba4a5aafaef4af5b0b1105bde /include/linux/amba | |
| parent | f70f5b9dc74ca7d0a64c4ead3fb28da09dc1b234 (diff) | |
| parent | 404a02cbd2ae8bf256a2fa1169bdfe86bb5ebb34 (diff) | |
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits)
ARM: DMA: add support for DMA debugging
ARM: PL011: add DMA burst threshold support for ST variants
ARM: PL011: Add support for transmit DMA
ARM: PL011: Ensure IRQs are disabled in UART interrupt handler
ARM: PL011: Separate hardware FIFO size from TTY FIFO size
ARM: PL011: Allow better handling of vendor data
ARM: PL011: Ensure error flags are clear at startup
ARM: PL011: include revision number in boot-time port printk
ARM: vexpress: add sched_clock() for Versatile Express
ARM i.MX53: Make MX53 EVK bootable
ARM i.MX53: Some bug fix about MX53 MSL code
ARM: 6607/1: sa1100: Update platform device registration
ARM: 6606/1: sa1100: Fix platform device registration
ARM i.MX51: rename IPU irqs
ARM i.MX51: Add ipu clock support
ARM: imx/mx27_3ds: Add PMIC support
ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn()
mx51: fix usb clock support
MX51: Add support for usb host 2
arch/arm/plat-mxc/ehci.c: fix errors/typos
...
Diffstat (limited to 'include/linux/amba')
| -rw-r--r-- | include/linux/amba/bus.h | 8 | ||||
| -rw-r--r-- | include/linux/amba/serial.h | 22 |
2 files changed, 30 insertions, 0 deletions
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index c6454cca0447..9e7f259346e1 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -18,6 +18,7 @@ #include <linux/device.h> #include <linux/err.h> #include <linux/resource.h> +#include <linux/regulator/consumer.h> #define AMBA_NR_IRQS 2 #define AMBA_CID 0xb105f00d @@ -28,6 +29,7 @@ struct amba_device { struct device dev; struct resource res; struct clk *pclk; + struct regulator *vcore; u64 dma_mask; unsigned int periphid; unsigned int irq[AMBA_NR_IRQS]; @@ -71,6 +73,12 @@ void amba_release_regions(struct amba_device *); #define amba_pclk_disable(d) \ do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0) +#define amba_vcore_enable(d) \ + (IS_ERR((d)->vcore) ? 0 : regulator_enable((d)->vcore)) + +#define amba_vcore_disable(d) \ + do { if (!IS_ERR((d)->vcore)) regulator_disable((d)->vcore); } while (0) + /* Some drivers don't use the struct amba_device */ #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff) #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 6021588ba0a8..5479fdc849e9 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -113,6 +113,21 @@ #define UART01x_LCRH_PEN 0x02 #define UART01x_LCRH_BRK 0x01 +#define ST_UART011_DMAWM_RX_1 (0 << 3) +#define ST_UART011_DMAWM_RX_2 (1 << 3) +#define ST_UART011_DMAWM_RX_4 (2 << 3) +#define ST_UART011_DMAWM_RX_8 (3 << 3) +#define ST_UART011_DMAWM_RX_16 (4 << 3) +#define ST_UART011_DMAWM_RX_32 (5 << 3) +#define ST_UART011_DMAWM_RX_48 (6 << 3) +#define ST_UART011_DMAWM_TX_1 0 +#define ST_UART011_DMAWM_TX_2 1 +#define ST_UART011_DMAWM_TX_4 2 +#define ST_UART011_DMAWM_TX_8 3 +#define ST_UART011_DMAWM_TX_16 4 +#define ST_UART011_DMAWM_TX_32 5 +#define ST_UART011_DMAWM_TX_48 6 + #define UART010_IIR_RTIS 0x08 #define UART010_IIR_TIS 0x04 #define UART010_IIR_RIS 0x02 @@ -180,6 +195,13 @@ struct amba_device; /* in uncompress this is included but amba/bus.h is not */ struct amba_pl010_data { void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl); }; + +struct dma_chan; +struct amba_pl011_data { + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); + void *dma_rx_param; + void *dma_tx_param; +}; #endif #endif |