Merge branch 'linux-4.14.y_for_4.14-2.0.x-imx' into 4.14-2.0.x-imx

17 files changed, 292 insertions, 66 deletions

diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index b811442c5ce6..9788a25a34f4 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -467,4 +467,28 @@ config VCC
 	depends on SUN_LDOMS
 	help
 	  Support for Sun logical domain consoles.
+
+config LDISC_AUTOLOAD
+	bool "Automatically load TTY Line Disciplines"
+	default y
+	help
+	  Historically the kernel has always automatically loaded any
+	  line discipline that is in a kernel module when a user asks
+	  for it to be loaded with the TIOCSETD ioctl, or through other
+	  means.  This is not always the best thing to do on systems
+	  where you know you will not be using some of the more
+	  "ancient" line disciplines, so prevent the kernel from doing
+	  this unless the request is coming from a process with the
+	  CAP_SYS_MODULE permissions.
+
+	  Say 'Y' here if you trust your userspace users to do the right
+	  thing, or if you have only provided the line disciplines that
+	  you know you will be using, or if you wish to continue to use
+	  the traditional method of on-demand loading of these modules
+	  by any user.
+
+	  This functionality can be changed at runtime with the
+	  dev.tty.ldisc_autoload sysctl, this configuration option will
+	  only set the default value of this functionality.
+
 endif # TTY
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 3613a6aabfb3..ec510e342e06 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -105,6 +105,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 	if (of_property_read_u32(np, "reg-offset", &prop) == 0)
 		port->mapbase += prop;
 
+	/* Compatibility with the deprecated pxa driver and 8250_pxa drivers. */
+	if (of_device_is_compatible(np, "mrvl,mmp-uart"))
+		port->regshift = 2;
+
 	/* Check for registers offset within the devices address range */
 	if (of_property_read_u32(np, "reg-shift", &prop) == 0)
 		port->regshift = prop;
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 4986b4aebe80..b31fed7f1679 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2033,6 +2033,111 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.setup		= pci_default_setup,
 		.exit		= pci_plx9050_exit,
 	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup,
+	},
 	/*
 	 * SBS Technologies, Inc., PMC-OCTALPRO 232
 	 */
@@ -3425,6 +3530,11 @@ static int
 serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
 {
 	int num_iomem, num_port, first_port = -1, i;
+	int rc;
+
+	rc = serial_pci_is_class_communication(dev);
+	if (rc)
+		return rc;
 
 	/*
 	 * Should we try to make guesses for multiport serial devices later?
@@ -3652,10 +3762,6 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 
 	board = &pci_boards[ent->driver_data];
 
-	rc = serial_pci_is_class_communication(dev);
-	if (rc)
-		return rc;
-
 	rc = serial_pci_is_blacklisted(dev);
 	if (rc)
 		return rc;
@@ -4579,10 +4685,10 @@ static const struct pci_device_id serial_pci_tbl[] = {
 	 */
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
+		pbn_pericom_PI7C9X7952 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
+		pbn_pericom_PI7C9X7952 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_pericom_PI7C9X7954 },
@@ -4591,10 +4697,10 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		pbn_pericom_PI7C9X7954 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
+		pbn_pericom_PI7C9X7952 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
+		pbn_pericom_PI7C9X7952 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_pericom_PI7C9X7954 },
@@ -4603,10 +4709,10 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		pbn_pericom_PI7C9X7954 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
+		pbn_pericom_PI7C9X7952 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
+		pbn_pericom_PI7C9X7952 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_pericom_PI7C9X7954 },
@@ -4615,13 +4721,13 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		pbn_pericom_PI7C9X7954 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
+		pbn_pericom_PI7C9X7951 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
+		pbn_pericom_PI7C9X7952 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
+		pbn_pericom_PI7C9X7952 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_pericom_PI7C9X7954 },
@@ -4630,16 +4736,16 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		pbn_pericom_PI7C9X7954 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
+		pbn_pericom_PI7C9X7952 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_pericom_PI7C9X7954 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
+		pbn_pericom_PI7C9X7952 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
+		pbn_pericom_PI7C9X7952 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_pericom_PI7C9X7954 },
@@ -4648,13 +4754,13 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		pbn_pericom_PI7C9X7954 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7954 },
+		pbn_pericom_PI7C9X7952 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7958 },
+		pbn_pericom_PI7C9X7954 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7958 },
+		pbn_pericom_PI7C9X7954 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_pericom_PI7C9X7958 },
@@ -4663,19 +4769,19 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		pbn_pericom_PI7C9X7958 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7958 },
+		pbn_pericom_PI7C9X7954 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_pericom_PI7C9X7958 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7958 },
+		pbn_pericom_PI7C9X7954 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_pericom_PI7C9X7958 },
 	{	PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_pericom_PI7C9X7958 },
+		pbn_pericom_PI7C9X7954 },
 	/*
 	 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
 	 */
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
index 4d68731af534..de1372ba24b1 100644
--- a/drivers/tty/serial/8250/8250_pxa.c
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -118,6 +118,10 @@ static int serial_pxa_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = of_alias_get_id(pdev->dev.of_node, "serial");
+	if (ret >= 0)
+		uart.port.line = ret;
+
 	uart.port.type = PORT_XSCALE;
 	uart.port.iotype = UPIO_MEM32;
 	uart.port.mapbase = mmres->start;
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index decc7f3c1ab2..ed545a61413c 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -52,11 +52,6 @@ struct ar933x_uart_port {
 	struct clk		*clk;
 };
 
-static inline bool ar933x_uart_console_enabled(void)
-{
-	return IS_ENABLED(CONFIG_SERIAL_AR933X_CONSOLE);
-}
-
 static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
 					    int offset)
 {
@@ -511,6 +506,7 @@ static const struct uart_ops ar933x_uart_ops = {
 	.verify_port	= ar933x_uart_verify_port,
 };
 
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
 static struct ar933x_uart_port *
 ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
 
@@ -607,14 +603,7 @@ static struct console ar933x_uart_console = {
 	.index		= -1,
 	.data		= &ar933x_uart_driver,
 };
-
-static void ar933x_uart_add_console_port(struct ar933x_uart_port *up)
-{
-	if (!ar933x_uart_console_enabled())
-		return;
-
-	ar933x_console_ports[up->port.line] = up;
-}
+#endif /* CONFIG_SERIAL_AR933X_CONSOLE */
 
 static struct uart_driver ar933x_uart_driver = {
 	.owner		= THIS_MODULE,
@@ -703,7 +692,9 @@ static int ar933x_uart_probe(struct platform_device *pdev)
 	baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
 	up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
 
-	ar933x_uart_add_console_port(up);
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
+	ar933x_console_ports[up->port.line] = up;
+#endif
 
 	ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
 	if (ret)
@@ -752,8 +743,9 @@ static int __init ar933x_uart_init(void)
 {
 	int ret;
 
-	if (ar933x_uart_console_enabled())
-		ar933x_uart_driver.cons = &ar933x_uart_console;
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
+	ar933x_uart_driver.cons = &ar933x_uart_console;
+#endif
 
 	ret = uart_register_driver(&ar933x_uart_driver);
 	if (ret)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 2286e9d73115..f747f1a1780c 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -176,6 +176,8 @@ struct atmel_uart_port {
 	unsigned int		pending_status;
 	spinlock_t		lock_suspended;
 
+	bool			hd_start_rx;	/* can start RX during half-duplex operation */
+
 #ifdef CONFIG_PM
 	struct {
 		u32		cr;
@@ -238,6 +240,12 @@ static inline void atmel_uart_write_char(struct uart_port *port, u8 value)
 	__raw_writeb(value, port->membase + ATMEL_US_THR);
 }
 
+static inline int atmel_uart_is_half_duplex(struct uart_port *port)
+{
+	return (port->rs485.flags & SER_RS485_ENABLED) &&
+		!(port->rs485.flags & SER_RS485_RX_DURING_TX);
+}
+
 #ifdef CONFIG_SERIAL_ATMEL_PDC
 static bool atmel_use_pdc_rx(struct uart_port *port)
 {
@@ -489,9 +497,9 @@ static void atmel_stop_tx(struct uart_port *port)
 	/* Disable interrupts */
 	atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
 
-	if ((port->rs485.flags & SER_RS485_ENABLED) &&
-	    !(port->rs485.flags & SER_RS485_RX_DURING_TX))
+	if (atmel_uart_is_half_duplex(port))
 		atmel_start_rx(port);
+
 }
 
 /*
@@ -508,8 +516,7 @@ static void atmel_start_tx(struct uart_port *port)
 		return;
 
 	if (atmel_use_pdc_tx(port) || atmel_use_dma_tx(port))
-		if ((port->rs485.flags & SER_RS485_ENABLED) &&
-		    !(port->rs485.flags & SER_RS485_RX_DURING_TX))
+		if (atmel_uart_is_half_duplex(port))
 			atmel_stop_rx(port);
 
 	if (atmel_use_pdc_tx(port))
@@ -806,10 +813,14 @@ static void atmel_complete_tx_dma(void *arg)
 	 */
 	if (!uart_circ_empty(xmit))
 		atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
-	else if ((port->rs485.flags & SER_RS485_ENABLED) &&
-		 !(port->rs485.flags & SER_RS485_RX_DURING_TX)) {
-		/* DMA done, stop TX, start RX for RS485 */
-		atmel_start_rx(port);
+	else if (atmel_uart_is_half_duplex(port)) {
+		/*
+		 * DMA done, re-enable TXEMPTY and signal that we can stop
+		 * TX and start RX for RS485
+		 */
+		atmel_port->hd_start_rx = true;
+		atmel_uart_writel(port, ATMEL_US_IER,
+				  atmel_port->tx_done_mask);
 	}
 
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -1163,6 +1174,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 					 sg_dma_len(&atmel_port->sg_rx)/2,
 					 DMA_DEV_TO_MEM,
 					 DMA_PREP_INTERRUPT);
+	if (!desc) {
+		dev_err(port->dev, "Preparing DMA cyclic failed\n");
+		goto chan_err;
+	}
 	desc->callback = atmel_complete_rx_dma;
 	desc->callback_param = port;
 	atmel_port->desc_rx = desc;
@@ -1250,9 +1265,20 @@ atmel_handle_transmit(struct uart_port *port, unsigned int pending)
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
 	if (pending & atmel_port->tx_done_mask) {
-		/* Either PDC or interrupt transmission */
 		atmel_uart_writel(port, ATMEL_US_IDR,
 				  atmel_port->tx_done_mask);
+
+		/* Start RX if flag was set and FIFO is empty */
+		if (atmel_port->hd_start_rx) {
+			if (!(atmel_uart_readl(port, ATMEL_US_CSR)
+					& ATMEL_US_TXEMPTY))
+				dev_warn(port->dev, "Should start RX, but TX fifo is not empty\n");
+
+			atmel_port->hd_start_rx = false;
+			atmel_start_rx(port);
+			return;
+		}
+
 		atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
 	}
 }
@@ -1379,8 +1405,7 @@ static void atmel_tx_pdc(struct uart_port *port)
 		atmel_uart_writel(port, ATMEL_US_IER,
 				  atmel_port->tx_done_mask);
 	} else {
-		if ((port->rs485.flags & SER_RS485_ENABLED) &&
-		    !(port->rs485.flags & SER_RS485_RX_DURING_TX)) {
+		if (atmel_uart_is_half_duplex(port)) {
 			/* DMA done, stop TX, start RX for RS485 */
 			atmel_start_rx(port);
 		}
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index ace2c1a453c4..472c9a04ed6b 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1749,6 +1749,8 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
 			else
 				cr1 &= ~UARTCR1_PT;
 		}
+	} else {
+		cr1 &= ~UARTCR1_PE;
 	}
 
 	/* ask the core to calculate the divisor */
@@ -1965,6 +1967,8 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 			else
 				ctrl &= ~UARTCTRL_PT;
 		}
+	} else {
+		ctrl &= ~UARTCTRL_PE;
 	}
 
 	/* ask the core to calculate the divisor */
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index f2b0d8cee8ef..0314e78e31ff 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -148,8 +148,10 @@ static int configure_kgdboc(void)
 	char *cptr = config;
 	struct console *cons;
 
-	if (!strlen(config) || isspace(config[0]))
+	if (!strlen(config) || isspace(config[0])) {
+		err = 0;
 		goto noconfig;
+	}
 
 	kgdboc_io_ops.is_console = 0;
 	kgdb_tty_driver = NULL;
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 9dfedbe6c071..54660002271a 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1323,6 +1323,8 @@ static int max310x_spi_probe(struct spi_device *spi)
 	if (spi->dev.of_node) {
 		const struct of_device_id *of_id =
 			of_match_device(max310x_dt_ids, &spi->dev);
+		if (!of_id)
+			return -ENODEV;
 
 		devtype = (struct max310x_devtype *)of_id->data;
 	} else {
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 57baa84ccf86..f4b8e4e17a86 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1343,11 +1343,14 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	wr_regl(port, S3C2410_ULCON, ulcon);
 	wr_regl(port, S3C2410_UBRDIV, quot);
 
+	port->status &= ~UPSTAT_AUTOCTS;
+
 	umcon = rd_regl(port, S3C2410_UMCON);
 	if (termios->c_cflag & CRTSCTS) {
 		umcon |= S3C2410_UMCOM_AFC;
 		/* Disable RTS when RX FIFO contains 63 bytes */
 		umcon &= ~S3C2412_UMCON_AFC_8;
+		port->status = UPSTAT_AUTOCTS;
 	} else {
 		umcon &= ~S3C2410_UMCOM_AFC;
 	}
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index a79f18edf2bd..e48523da47ac 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1483,7 +1483,7 @@ static int __init sc16is7xx_init(void)
 	ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver);
 	if (ret < 0) {
 		pr_err("failed to init sc16is7xx i2c --> %d\n", ret);
-		return ret;
+		goto err_i2c;
 	}
 #endif
 
@@ -1491,10 +1491,18 @@ static int __init sc16is7xx_init(void)
 	ret = spi_register_driver(&sc16is7xx_spi_uart_driver);
 	if (ret < 0) {
 		pr_err("failed to init sc16is7xx spi --> %d\n", ret);
-		return ret;
+		goto err_spi;
 	}
 #endif
 	return ret;
+
+err_spi:
+#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
+	i2c_del_driver(&sc16is7xx_i2c_uart_driver);
+#endif
+err_i2c:
+	uart_unregister_driver(&sc16is7xx_uart);
+	return ret;
 }
 module_init(sc16is7xx_init);
 
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 94ac6c6e8fb8..51a58c367953 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -143,6 +143,9 @@ static void uart_start(struct tty_struct *tty)
 	struct uart_port *port;
 	unsigned long flags;
 
+	if (!state)
+		return;
+
 	port = uart_port_lock(state, flags);
 	__uart_start(tty);
 	uart_port_unlock(port, flags);
@@ -2415,6 +2418,9 @@ static void uart_poll_put_char(struct tty_driver *driver, int line, char ch)
 	struct uart_state *state = drv->state + line;
 	struct uart_port *port;
 
+	if (!state)
+		return;
+
 	port = uart_port_ref(state);
 	if (!port)
 		return;
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 37dba940d898..d5f933ec153c 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -806,19 +806,9 @@ static void sci_transmit_chars(struct uart_port *port)
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
-	if (uart_circ_empty(xmit)) {
+	if (uart_circ_empty(xmit))
 		sci_stop_tx(port);
-	} else {
-		ctrl = serial_port_in(port, SCSCR);
-
-		if (port->type != PORT_SCI) {
-			serial_port_in(port, SCxSR); /* Dummy read */
-			sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port));
-		}
 
-		ctrl |= SCSCR_TIE;
-		serial_port_out(port, SCSCR, ctrl);
-	}
 }
 
 /* On SH3, SCIF may read end-of-break as a space->mark char */
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 217686cb4cd3..b0da63737aa1 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -366,7 +366,13 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
 		cdns_uart_handle_tx(dev_id);
 		isrstatus &= ~CDNS_UART_IXR_TXEMPTY;
 	}
-	if (isrstatus & CDNS_UART_IXR_RXMASK)
+
+	/*
+	 * Skip RX processing if RX is disabled as RXEMPTY will never be set
+	 * as read bytes will not be removed from the FIFO.
+	 */
+	if (isrstatus & CDNS_UART_IXR_RXMASK &&
+	    !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS))
 		cdns_uart_handle_rx(dev_id, isrstatus);
 
 	spin_unlock(&port->lock);
@@ -1264,7 +1270,7 @@ static void cdns_uart_console_write(struct console *co, const char *s,
  *
  * Return: 0 on success, negative errno otherwise.
  */
-static int __init cdns_uart_console_setup(struct console *co, char *options)
+static int cdns_uart_console_setup(struct console *co, char *options)
 {
 	struct uart_port *port = &cdns_uart_port[co->index];
 	int baud = 9600;
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 217114227f8d..cf11882d2602 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -25,7 +25,7 @@
  * Byte threshold to limit memory consumption for flip buffers.
  * The actual memory limit is > 2x this amount.
  */
-#define TTYB_DEFAULT_MEM_LIMIT	65536
+#define TTYB_DEFAULT_MEM_LIMIT	(640 * 1024UL)
 
 /*
  * We default to dicing tty buffer allocations to this many characters
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 7e351d205393..dba4f53a7fff 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -511,6 +511,8 @@ static const struct file_operations hung_up_tty_fops = {
 static DEFINE_SPINLOCK(redirect_lock);
 static struct file *redirect;
 
+extern void tty_sysctl_init(void);
+
 /**
  *	tty_wakeup	-	request more data
  *	@tty: terminal
@@ -3332,6 +3334,7 @@ void console_sysfs_notify(void)
  */
 int __init tty_init(void)
 {
+	tty_sysctl_init();
 	cdev_init(&tty_cdev, &tty_fops);
 	if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
 	    register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index ca656ef8de64..01fcdc7ff077 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -155,6 +155,13 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
  *		takes tty_ldiscs_lock to guard against ldisc races
  */
 
+#if defined(CONFIG_LDISC_AUTOLOAD)
+	#define INITIAL_AUTOLOAD_STATE	1
+#else
+	#define INITIAL_AUTOLOAD_STATE	0
+#endif
+static int tty_ldisc_autoload = INITIAL_AUTOLOAD_STATE;
+
 static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc)
 {
 	struct tty_ldisc *ld;
@@ -169,6 +176,8 @@ static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc)
 	 */
 	ldops = get_ldops(disc);
 	if (IS_ERR(ldops)) {
+		if (!capable(CAP_SYS_MODULE) && !tty_ldisc_autoload)
+			return ERR_PTR(-EPERM);
 		request_module("tty-ldisc-%d", disc);
 		ldops = get_ldops(disc);
 		if (IS_ERR(ldops))
@@ -841,3 +850,41 @@ void tty_ldisc_deinit(struct tty_struct *tty)
 		tty_ldisc_put(tty->ldisc);
 	tty->ldisc = NULL;
 }
+
+static int zero;
+static int one = 1;
+static struct ctl_table tty_table[] = {
+	{
+		.procname	= "ldisc_autoload",
+		.data		= &tty_ldisc_autoload,
+		.maxlen		= sizeof(tty_ldisc_autoload),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+		.extra1		= &zero,
+		.extra2		= &one,
+	},
+	{ }
+};
+
+static struct ctl_table tty_dir_table[] = {
+	{
+		.procname	= "tty",
+		.mode		= 0555,
+		.child		= tty_table,
+	},
+	{ }
+};
+
+static struct ctl_table tty_root_table[] = {
+	{
+		.procname	= "dev",
+		.mode		= 0555,
+		.child		= tty_dir_table,
+	},
+	{ }
+};
+
+void tty_sysctl_init(void)
+{
+	register_sysctl_table(tty_root_table);
+}