Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This patch consists of the usual driver updates (qla2xxx, qla4xxx,
  lpfc, be2iscsi, fnic, ufs, NCR5380) The NCR5380 is the addition to
  maintained status of a long neglected driver for older hardware.  In
  addition there are a lot of minor fixes and cleanups and some more
  updates to make scsi mq ready"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (130 commits)
  include/scsi/osd_protocol.h: remove unnecessary __constant
  mvsas: Recognise device/subsystem 9485/9485 as 88SE9485
  Revert "be2iscsi: Fix processing cqe for cxn whose endpoint is freed"
  mptfusion: fix msgContext in mptctl_hp_hostinfo
  acornscsi: remove linked command support
  scsi/NCR5380: dprintk macro
  fusion: Remove use of DEF_SCSI_QCMD
  fusion: Add free msg frames to the head, not tail of list
  mpt2sas: Add free smids to the head, not tail of list
  mpt2sas: Remove use of DEF_SCSI_QCMD
  mpt2sas: Remove uses of serial_number
  mpt3sas: Remove use of DEF_SCSI_QCMD
  mpt3sas: Remove uses of serial_number
  qla2xxx: Use kmemdup instead of kmalloc + memcpy
  qla4xxx: Use kmemdup instead of kmalloc + memcpy
  qla2xxx: fix incorrect debug printk
  be2iscsi: Bump the driver version
  be2iscsi: Fix processing cqe for cxn whose endpoint is freed
  be2iscsi: Fix destroy MCC-CQ before MCC-EQ is destroyed
  be2iscsi: Fix memory corruption in MBX path
  ...

3 files changed, 0 insertions, 59 deletions

diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index 059ff477a398..2e797a367608 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -62,13 +62,6 @@
  */
 #undef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
 /*
- * SCSI-II Linked command support.
- *
- * The higher level code doesn't support linked commands yet, and so the option
- * is undef'd here.
- */
-#undef CONFIG_SCSI_ACORNSCSI_LINK
-/*
  * SCSI-II Synchronous transfer support.
  *
  * Tried and tested...
@@ -160,10 +153,6 @@
 #error "Yippee!  ABORT TAG is now defined!  Remove this error!"
 #endif
 
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
-#error SCSI2 LINKed commands not supported (yet)!
-#endif
-
 #ifdef USE_DMAC
 /*
  * DMAC setup parameters
@@ -1668,42 +1657,6 @@ void acornscsi_message(AS_Host *host)
 	}
 	break;
 
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
-    case LINKED_CMD_COMPLETE:
-    case LINKED_FLG_CMD_COMPLETE:
-	/*
-	 * We don't support linked commands yet
-	 */
-	if (0) {
-#if (DEBUG & DEBUG_LINK)
-	    printk("scsi%d.%c: lun %d tag %d linked command complete\n",
-		    host->host->host_no, acornscsi_target(host), host->SCpnt->tag);
-#endif
-	    /*
-	     * A linked command should only terminate with one of these messages
-	     * if there are more linked commands available.
-	     */
-	    if (!host->SCpnt->next_link) {
-		printk(KERN_WARNING "scsi%d.%c: lun %d tag %d linked command complete, but no next_link\n",
-			instance->host_no, acornscsi_target(host), host->SCpnt->tag);
-		acornscsi_sbic_issuecmd(host, CMND_ASSERTATN);
-		msgqueue_addmsg(&host->scsi.msgs, 1, ABORT);
-	    } else {
-		struct scsi_cmnd *SCpnt = host->SCpnt;
-
-		acornscsi_dma_cleanup(host);
-
-		host->SCpnt = host->SCpnt->next_link;
-		host->SCpnt->tag = SCpnt->tag;
-		SCpnt->result = DID_OK | host->scsi.SCp.Message << 8 | host->Scsi.SCp.Status;
-		SCpnt->done(SCpnt);
-
-		/* initialise host->SCpnt->SCp */
-	    }
-	    break;
-	}
-#endif
-
     default: /* reject message */
 	printk(KERN_ERR "scsi%d.%c: unrecognised message %02X, rejecting\n",
 		host->host->host_no, acornscsi_target(host),
@@ -2825,9 +2778,6 @@ char *acornscsi_info(struct Scsi_Host *host)
 #ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
     " TAG"
 #endif
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
-    " LINK"
-#endif
 #if (DEBUG & DEBUG_NO_WRITE)
     " NOWRITE (" __stringify(NO_WRITE) ")"
 #endif
@@ -2851,9 +2801,6 @@ static int acornscsi_show_info(struct seq_file *m, struct Scsi_Host *instance)
 #ifdef CONFIG_SCSI_ACORNSCSI_TAGGED_QUEUE
     " TAG"
 #endif
-#ifdef CONFIG_SCSI_ACORNSCSI_LINK
-    " LINK"
-#endif
 #if (DEBUG & DEBUG_NO_WRITE)
     " NOWRITE (" __stringify(NO_WRITE) ")"
 #endif
diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c
index f8e060900052..8ef810a4476e 100644
--- a/drivers/scsi/arm/cumana_1.c
+++ b/drivers/scsi/arm/cumana_1.c
@@ -36,9 +36,6 @@
 	void __iomem *base;		\
 	void __iomem *dma
 
-#define BOARD_NORMAL	0
-#define BOARD_NCR53C400	1
-
 #include "../NCR5380.h"
 
 void cumanascsi_setup(char *str, int *ints)
diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c
index 4266eef8aca1..188e734c7ff0 100644
--- a/drivers/scsi/arm/oak.c
+++ b/drivers/scsi/arm/oak.c
@@ -37,9 +37,6 @@
 #define NCR5380_implementation_fields	\
 	void __iomem *base
 
-#define BOARD_NORMAL	0
-#define BOARD_NCR53C400	1
-
 #include "../NCR5380.h"
 
 #undef START_DMA_INITIATOR_RECEIVE_REG