Merge branch 'linus' into core/rcu

1 files changed, 128 insertions, 96 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 9cb023edd2e9..d06507388635 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -31,14 +31,14 @@
 
 static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 				struct data_queue *queue,
-				struct sk_buff *frag_skb,
-				struct ieee80211_tx_control *control)
+				struct sk_buff *frag_skb)
 {
-	struct skb_frame_desc *skbdesc;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(frag_skb);
+	struct ieee80211_tx_info *rts_info;
 	struct sk_buff *skb;
 	int size;
 
-	if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
+	if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
 		size = sizeof(struct ieee80211_cts);
 	else
 		size = sizeof(struct ieee80211_rts);
@@ -52,23 +52,38 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom);
 	skb_put(skb, size);
 
-	if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
-		ieee80211_ctstoself_get(rt2x00dev->hw, control->vif,
-					frag_skb->data, frag_skb->len, control,
+	/*
+	 * Copy TX information over from original frame to
+	 * RTS/CTS frame. Note that we set the no encryption flag
+	 * since we don't want this frame to be encrypted.
+	 * RTS frames should be acked, while CTS-to-self frames
+	 * should not. The ready for TX flag is cleared to prevent
+	 * it being automatically send when the descriptor is
+	 * written to the hardware.
+	 */
+	memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
+	rts_info = IEEE80211_SKB_CB(skb);
+	rts_info->control.hw_key = NULL;
+	rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
+	rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
+	rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
+
+	if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
+		rts_info->flags |= IEEE80211_TX_CTL_NO_ACK;
+	else
+		rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
+
+	if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
+		ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif,
+					frag_skb->data, size, tx_info,
 					(struct ieee80211_cts *)(skb->data));
 	else
-		ieee80211_rts_get(rt2x00dev->hw, control->vif,
-				  frag_skb->data, frag_skb->len, control,
+		ieee80211_rts_get(rt2x00dev->hw, tx_info->control.vif,
+				  frag_skb->data, size, tx_info,
 				  (struct ieee80211_rts *)(skb->data));
 
-	/*
-	 * Initialize skb descriptor
-	 */
-	skbdesc = get_skb_frame_desc(skb);
-	memset(skbdesc, 0, sizeof(*skbdesc));
-	skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
-
-	if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, queue, skb, control)) {
+	if (rt2x00queue_write_tx_frame(queue, skb)) {
+		dev_kfree_skb_any(skb);
 		WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
 		return NETDEV_TX_BUSY;
 	}
@@ -76,13 +91,13 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	return NETDEV_TX_OK;
 }
 
-int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
-		 struct ieee80211_tx_control *control)
+int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
+	enum data_queue_qid qid = skb_get_queue_mapping(skb);
 	struct data_queue *queue;
-	struct skb_frame_desc *skbdesc;
 	u16 frame_control;
 
 	/*
@@ -100,57 +115,50 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
 	/*
 	 * Determine which queue to put packet on.
 	 */
-	if (control->flags & IEEE80211_TXCTL_SEND_AFTER_DTIM &&
+	if (tx_info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM &&
 	    test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags))
-		queue = rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_ATIM);
+		queue = rt2x00queue_get_queue(rt2x00dev, QID_ATIM);
 	else
-		queue = rt2x00queue_get_queue(rt2x00dev, control->queue);
+		queue = rt2x00queue_get_queue(rt2x00dev, qid);
 	if (unlikely(!queue)) {
 		ERROR(rt2x00dev,
 		      "Attempt to send packet over invalid queue %d.\n"
-		      "Please file bug report to %s.\n",
-		      control->queue, DRV_PROJECT);
+		      "Please file bug report to %s.\n", qid, DRV_PROJECT);
 		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
 	/*
-	 * If CTS/RTS is required. and this frame is not CTS or RTS,
-	 * create and queue that frame first. But make sure we have
-	 * at least enough entries available to send this CTS/RTS
-	 * frame as well as the data frame.
+	 * If CTS/RTS is required. create and queue that frame first.
+	 * Make sure we have at least enough entries available to send
+	 * this CTS/RTS frame as well as the data frame.
+	 * Note that when the driver has set the set_rts_threshold()
+	 * callback function it doesn't need software generation of
+	 * either RTS or CTS-to-self frame and handles everything
+	 * inside the hardware.
 	 */
 	frame_control = le16_to_cpu(ieee80211hdr->frame_control);
-	if (!is_rts_frame(frame_control) && !is_cts_frame(frame_control) &&
-	    (control->flags & (IEEE80211_TXCTL_USE_RTS_CTS |
-			       IEEE80211_TXCTL_USE_CTS_PROTECT))) {
+	if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS |
+			       IEEE80211_TX_CTL_USE_CTS_PROTECT)) &&
+	    !rt2x00dev->ops->hw->set_rts_threshold) {
 		if (rt2x00queue_available(queue) <= 1) {
-			ieee80211_stop_queue(rt2x00dev->hw, control->queue);
+			ieee80211_stop_queue(rt2x00dev->hw, qid);
 			return NETDEV_TX_BUSY;
 		}
 
-		if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb, control)) {
-			ieee80211_stop_queue(rt2x00dev->hw, control->queue);
+		if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) {
+			ieee80211_stop_queue(rt2x00dev->hw, qid);
 			return NETDEV_TX_BUSY;
 		}
 	}
 
-	/*
-	 * Initialize skb descriptor
-	 */
-	skbdesc = get_skb_frame_desc(skb);
-	memset(skbdesc, 0, sizeof(*skbdesc));
-
-	if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, queue, skb, control)) {
-		ieee80211_stop_queue(rt2x00dev->hw, control->queue);
+	if (rt2x00queue_write_tx_frame(queue, skb)) {
+		ieee80211_stop_queue(rt2x00dev->hw, qid);
 		return NETDEV_TX_BUSY;
 	}
 
-	if (rt2x00queue_full(queue))
-		ieee80211_stop_queue(rt2x00dev->hw, control->queue);
-
-	if (rt2x00dev->ops->lib->kick_tx_queue)
-		rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue);
+	if (rt2x00queue_threshold(queue))
+		ieee80211_stop_queue(rt2x00dev->hw, qid);
 
 	return NETDEV_TX_OK;
 }
@@ -183,8 +191,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct rt2x00_intf *intf = vif_to_intf(conf->vif);
-	struct data_queue *queue =
-	    rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_BEACON);
+	struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, QID_BEACON);
 	struct queue_entry *entry = NULL;
 	unsigned int i;
 
@@ -196,24 +203,43 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	    !test_bit(DEVICE_STARTED, &rt2x00dev->flags))
 		return -ENODEV;
 
-	/*
-	 * When we don't support mixed interfaces (a combination
-	 * of sta and ap virtual interfaces) then we can only
-	 * add this interface when the rival interface count is 0.
-	 */
-	if (!test_bit(DRIVER_SUPPORT_MIXED_INTERFACES, &rt2x00dev->flags) &&
-	    ((conf->type == IEEE80211_IF_TYPE_AP && rt2x00dev->intf_sta_count) ||
-	     (conf->type != IEEE80211_IF_TYPE_AP && rt2x00dev->intf_ap_count)))
-		return -ENOBUFS;
-
-	/*
-	 * Check if we exceeded the maximum amount of supported interfaces.
-	 */
-	if ((conf->type == IEEE80211_IF_TYPE_AP &&
-	     rt2x00dev->intf_ap_count >= rt2x00dev->ops->max_ap_intf) ||
-	    (conf->type != IEEE80211_IF_TYPE_AP &&
-	     rt2x00dev->intf_sta_count >= rt2x00dev->ops->max_sta_intf))
-		return -ENOBUFS;
+	switch (conf->type) {
+	case IEEE80211_IF_TYPE_AP:
+		/*
+		 * We don't support mixed combinations of
+		 * sta and ap interfaces.
+		 */
+		if (rt2x00dev->intf_sta_count)
+			return -ENOBUFS;
+
+		/*
+		 * Check if we exceeded the maximum amount
+		 * of supported interfaces.
+		 */
+		if (rt2x00dev->intf_ap_count >= rt2x00dev->ops->max_ap_intf)
+			return -ENOBUFS;
+
+		break;
+	case IEEE80211_IF_TYPE_STA:
+	case IEEE80211_IF_TYPE_IBSS:
+		/*
+		 * We don't support mixed combinations of
+		 * sta and ap interfaces.
+		 */
+		if (rt2x00dev->intf_ap_count)
+			return -ENOBUFS;
+
+		/*
+		 * Check if we exceeded the maximum amount
+		 * of supported interfaces.
+		 */
+		if (rt2x00dev->intf_sta_count >= rt2x00dev->ops->max_sta_intf)
+			return -ENOBUFS;
+
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	/*
 	 * Loop through all beacon queues to find a free
@@ -241,6 +267,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 		rt2x00dev->intf_sta_count++;
 
 	spin_lock_init(&intf->lock);
+	spin_lock_init(&intf->seqlock);
 	intf->beacon = entry;
 
 	if (conf->type == IEEE80211_IF_TYPE_AP)
@@ -304,6 +331,7 @@ EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
 int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
+	int force_reconfig;
 
 	/*
 	 * Mac80211 might be calling this function while we are trying
@@ -323,7 +351,17 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 			rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
 	}
 
-	rt2x00lib_config(rt2x00dev, conf, 0);
+	/*
+	 * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently
+	 * been started and the configuration must be forced upon the hardware.
+	 * Otherwise registers will not be intialized correctly and could
+	 * result in non-working hardware because essential registers aren't
+	 * initialized.
+	 */
+	force_reconfig =
+	    __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
+
+	rt2x00lib_config(rt2x00dev, conf, force_reconfig);
 
 	/*
 	 * Reenable RX only if the radio should be on.
@@ -343,7 +381,8 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw,
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct rt2x00_intf *intf = vif_to_intf(vif);
-	int status;
+	int update_bssid = 0;
+	int status = 0;
 
 	/*
 	 * Mac80211 might be calling this function while we are trying
@@ -355,12 +394,13 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw,
 	spin_lock(&intf->lock);
 
 	/*
-	 * If the interface does not work in master mode,
-	 * then the bssid value in the interface structure
-	 * should now be set.
+	 * conf->bssid can be NULL if coming from the internal
+	 * beacon update routine.
 	 */
-	if (conf->type != IEEE80211_IF_TYPE_AP)
+	if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) {
+		update_bssid = 1;
 		memcpy(&intf->bssid, conf->bssid, ETH_ALEN);
+	}
 
 	spin_unlock(&intf->lock);
 
@@ -370,19 +410,14 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw,
 	 * values as arguments we make keep access to rt2x00_intf thread safe
 	 * even without the lock.
 	 */
-	rt2x00lib_config_intf(rt2x00dev, intf, conf->type, NULL, conf->bssid);
+	rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL,
+			      update_bssid ? conf->bssid : NULL);
 
 	/*
-	 * We only need to initialize the beacon when master mode is enabled.
+	 * Update the beacon.
 	 */
-	if (conf->type != IEEE80211_IF_TYPE_AP || !conf->beacon)
-		return 0;
-
-	status = rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw,
-						   conf->beacon,
-						   conf->beacon_control);
-	if (status)
-		dev_kfree_skb(conf->beacon);
+	if (conf->changed & IEEE80211_IFCC_BEACON)
+		status = rt2x00queue_update_beacon(rt2x00dev, vif);
 
 	return status;
 }
@@ -428,7 +463,7 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 	if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags))
 		rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags);
 	else
-		queue_work(rt2x00dev->workqueue, &rt2x00dev->filter_work);
+		queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work);
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter);
 
@@ -454,10 +489,10 @@ int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	unsigned int i;
 
-	for (i = 0; i < hw->queues; i++) {
-		stats->data[i].len = rt2x00dev->tx[i].length;
-		stats->data[i].limit = rt2x00dev->tx[i].limit;
-		stats->data[i].count = rt2x00dev->tx[i].count;
+	for (i = 0; i < rt2x00dev->ops->tx_queues; i++) {
+		stats[i].len = rt2x00dev->tx[i].length;
+		stats[i].limit = rt2x00dev->tx[i].limit;
+		stats[i].count = rt2x00dev->tx[i].count;
 	}
 
 	return 0;
@@ -498,7 +533,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 	 * When the erp information has changed, we should perform
 	 * additional configuration steps. For all other changes we are done.
 	 */
-	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
+	if (changes & (BSS_CHANGED_ERP_PREAMBLE | BSS_CHANGED_ERP_CTS_PROT)) {
 		if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags))
 			rt2x00lib_config_erp(rt2x00dev, intf, bss_conf);
 		else
@@ -509,13 +544,13 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 	memcpy(&intf->conf, bss_conf, sizeof(*bss_conf));
 	if (delayed) {
 		intf->delayed_flags |= delayed;
-		queue_work(rt2x00dev->workqueue, &rt2x00dev->intf_work);
+		schedule_work(&rt2x00dev->intf_work);
 	}
 	spin_unlock(&intf->lock);
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_bss_info_changed);
 
-int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue_idx,
+int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
 		      const struct ieee80211_tx_queue_params *params)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
@@ -539,10 +574,7 @@ int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue_idx,
 	else
 		queue->cw_max = 10; /* cw_min: 2^10 = 1024. */
 
-	if (params->aifs >= 0)
-		queue->aifs = params->aifs;
-	else
-		queue->aifs = 2;
+	queue->aifs = params->aifs;
 
 	INFO(rt2x00dev,
 	     "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d.\n",