Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
  net: Allow dependancies of FDDI & Tokenring to be modular.
  igb: Fix build warning when DCA is disabled.
  net: Fix warning fallout from recent NAPI interface changes.
  gro: Fix potential use after free
  sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
  sfc: When disabling the NIC, close the device rather than unregistering it
  sfc: SFT9001: Add cable diagnostics
  sfc: Add support for multiple PHY self-tests
  sfc: Merge top-level functions for self-tests
  sfc: Clean up PHY mode management in loopback self-test
  sfc: Fix unreliable link detection in some loopback modes
  sfc: Generate unique names for per-NIC workqueues
  802.3ad: use standard ethhdr instead of ad_header
  802.3ad: generalize out mac address initializer
  802.3ad: initialize ports LACPDU from const initializer
  802.3ad: remove typedef around ad_system
  802.3ad: turn ports is_individual into a bool
  802.3ad: turn ports is_enabled into a bool
  802.3ad: make ntt bool
  ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
  ...

Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).

1 files changed, 8 insertions, 7 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index d3a2a5b4ac56..603c84bed630 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -25,7 +25,7 @@
  * in the file called LICENSE.GPL.
  *
  * Contact Information:
- * Tomas Winkler <tomas.winkler@intel.com>
+ *  Intel Linux Wireless <ilw@linux.intel.com>
  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  *
  * BSD LICENSE
@@ -68,17 +68,14 @@ struct iwl_priv;
 /*
  * EEPROM access time values:
  *
- * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG,
- *   then clearing (with subsequent read/modify/write) CSR_EEPROM_REG bit
- *   CSR_EEPROM_REG_BIT_CMD (0x2).
+ * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG.
  * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1).
  * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec.
  * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG.
  */
 #define IWL_EEPROM_ACCESS_TIMEOUT	5000 /* uSec */
-#define IWL_EEPROM_ACCESS_DELAY		10   /* uSec */
 
-#define IWL_EEPROM_SEM_TIMEOUT 		10   /* milliseconds */
+#define IWL_EEPROM_SEM_TIMEOUT 		10   /* microseconds */
 #define IWL_EEPROM_SEM_RETRY_LIMIT	1000 /* number of attempts (not time) */
 
 
@@ -147,6 +144,7 @@ struct iwl_eeprom_channel {
 /*5000 calibrations */
 #define EEPROM_5000_CALIB_ALL	(INDIRECT_ADDRESS | INDIRECT_CALIBRATION)
 #define EEPROM_5000_XTAL	((2*0x128) | EEPROM_5000_CALIB_ALL)
+#define EEPROM_5000_TEMPERATURE ((2*0x12A) | EEPROM_5000_CALIB_ALL)
 
 /* 5000 links */
 #define EEPROM_5000_LINK_HOST             (2*0x64)
@@ -174,6 +172,9 @@ struct iwl_eeprom_channel {
 #define EEPROM_5000_REG_BAND_52_FAT_CHANNELS  ((0x92)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 22  bytes */
 
+/* 5050 Specific */
+#define EEPROM_5050_TX_POWER_VERSION    (4)
+#define EEPROM_5050_EEPROM_VERSION	(0x21E)
 
 /* 2.4 GHz */
 extern const u8 iwl_eeprom_band_1[14];
@@ -371,7 +372,7 @@ struct iwl_eeprom_ops {
 	int (*verify_signature) (struct iwl_priv *priv);
 	int (*acquire_semaphore) (struct iwl_priv *priv);
 	void (*release_semaphore) (struct iwl_priv *priv);
-	int (*check_version) (struct iwl_priv *priv);
+	u16 (*calib_version) (struct iwl_priv *priv);
 	const u8* (*query_addr) (const struct iwl_priv *priv, size_t offset);
 };