Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Most notable changes in here:

   1) By far the biggest accomplishment, thanks to a large range of
      contributors, is the addition of multi-send for transmit.  This is
      the result of discussions back in Chicago, and the hard work of
      several individuals.

      Now, when the ->ndo_start_xmit() method of a driver sees
      skb->xmit_more as true, it can choose to defer the doorbell
      telling the driver to start processing the new TX queue entires.

      skb->xmit_more means that the generic networking is guaranteed to
      call the driver immediately with another SKB to send.

      There is logic added to the qdisc layer to dequeue multiple
      packets at a time, and the handling mis-predicted offloads in
      software is now done with no locks held.

      Finally, pktgen is extended to have a "burst" parameter that can
      be used to test a multi-send implementation.

      Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
      virtio_net

      Adding support is almost trivial, so export more drivers to
      support this optimization soon.

      I want to thank, in no particular or implied order, Jesper
      Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
      Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
      David Tat, Hannes Frederic Sowa, and Rusty Russell.

   2) PTP and timestamping support in bnx2x, from Michal Kalderon.

   3) Allow adjusting the rx_copybreak threshold for a driver via
      ethtool, and add rx_copybreak support to enic driver.  From
      Govindarajulu Varadarajan.

   4) Significant enhancements to the generic PHY layer and the bcm7xxx
      driver in particular (EEE support, auto power down, etc.) from
      Florian Fainelli.

   5) Allow raw buffers to be used for flow dissection, allowing drivers
      to determine the optimal "linear pull" size for devices that DMA
      into pools of pages.  The objective is to get exactly the
      necessary amount of headers into the linear SKB area pre-pulled,
      but no more.  The new interface drivers use is eth_get_headlen().
      From WANG Cong, with driver conversions (several had their own
      by-hand duplicated implementations) by Alexander Duyck and Eric
      Dumazet.

   6) Support checksumming more smoothly and efficiently for
      encapsulations, and add "foo over UDP" facility.  From Tom
      Herbert.

   7) Add Broadcom SF2 switch driver to DSA layer, from Florian
      Fainelli.

   8) eBPF now can load programs via a system call and has an extensive
      testsuite.  Alexei Starovoitov and Daniel Borkmann.

   9) Major overhaul of the packet scheduler to use RCU in several major
      areas such as the classifiers and rate estimators.  From John
      Fastabend.

  10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
      Duyck.

  11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
      Dumazet.

  12) Add Datacenter TCP congestion control algorithm support, From
      Florian Westphal.

  13) Reorganize sk_buff so that __copy_skb_header() is significantly
      faster.  From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
  netlabel: directly return netlbl_unlabel_genl_init()
  net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
  net: description of dma_cookie cause make xmldocs warning
  cxgb4: clean up a type issue
  cxgb4: potential shift wrapping bug
  i40e: skb->xmit_more support
  net: fs_enet: Add NAPI TX
  net: fs_enet: Remove non NAPI RX
  r8169:add support for RTL8168EP
  net_sched: copy exts->type in tcf_exts_change()
  wimax: convert printk to pr_foo()
  af_unix: remove 0 assignment on static
  ipv6: Do not warn for informational ICMP messages, regardless of type.
  Update Intel Ethernet Driver maintainers list
  bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
  tipc: fix bug in multicast congestion handling
  net: better IFF_XMIT_DST_RELEASE support
  net/mlx4_en: remove NETDEV_TX_BUSY
  3c59x: fix bad split of cpu_to_le32(pci_map_single())
  net: bcmgenet: fix Tx ring priority programming
  ...

7 files changed, 401 insertions, 89 deletions

diff --git a/drivers/net/ethernet/arc/Kconfig b/drivers/net/ethernet/arc/Kconfig
index 514c57fd26f1..8e262e2b39b6 100644
--- a/drivers/net/ethernet/arc/Kconfig
+++ b/drivers/net/ethernet/arc/Kconfig
@@ -17,10 +17,14 @@ config NET_VENDOR_ARC
 
 if NET_VENDOR_ARC
 
-config ARC_EMAC
-	tristate "ARC EMAC support"
+config ARC_EMAC_CORE
+	tristate
 	select MII
 	select PHYLIB
+
+config ARC_EMAC
+	tristate "ARC EMAC support"
+	select ARC_EMAC_CORE
 	depends on OF_IRQ
 	depends on OF_NET
 	---help---
@@ -28,4 +32,14 @@ config ARC_EMAC
 	  non-standard on-chip ethernet device ARC EMAC 10/100 is used.
 	  Say Y here if you have such a board.  If unsure, say N.
 
+config EMAC_ROCKCHIP
+	tristate "Rockchip EMAC support"
+	select ARC_EMAC_CORE
+	depends on OF_IRQ && OF_NET && REGULATOR
+	---help---
+	  Support for Rockchip RK3066/RK3188 EMAC ethernet controllers.
+	  This selects Rockchip SoC glue layer support for the
+	  emac device driver. This driver is used for RK3066/RK3188
+	  EMAC ethernet controller.
+
 endif # NET_VENDOR_ARC
diff --git a/drivers/net/ethernet/arc/Makefile b/drivers/net/ethernet/arc/Makefile
index 00c8657637d5..79108af553fb 100644
--- a/drivers/net/ethernet/arc/Makefile
+++ b/drivers/net/ethernet/arc/Makefile
@@ -3,4 +3,6 @@
 #
 
 arc_emac-objs := emac_main.o emac_mdio.o
-obj-$(CONFIG_ARC_EMAC) += arc_emac.o
+obj-$(CONFIG_ARC_EMAC_CORE) += arc_emac.o
+obj-$(CONFIG_ARC_EMAC) += emac_arc.o
+obj-$(CONFIG_EMAC_ROCKCHIP) += emac_rockchip.o
diff --git a/drivers/net/ethernet/arc/emac.h b/drivers/net/ethernet/arc/emac.h
index 36cc9bd07c47..dae1ac300a49 100644
--- a/drivers/net/ethernet/arc/emac.h
+++ b/drivers/net/ethernet/arc/emac.h
@@ -123,6 +123,10 @@ struct buffer_state {
  * @speed:	PHY's last set speed.
  */
 struct arc_emac_priv {
+	const char *drv_name;
+	const char *drv_version;
+	void (*set_mac_speed)(void *priv, unsigned int speed);
+
 	/* Devices */
 	struct device *dev;
 	struct phy_device *phy_dev;
@@ -204,7 +208,9 @@ static inline void arc_reg_clr(struct arc_emac_priv *priv, int reg, int mask)
 	arc_reg_set(priv, reg, value & ~mask);
 }
 
-int arc_mdio_probe(struct platform_device *pdev, struct arc_emac_priv *priv);
+int arc_mdio_probe(struct arc_emac_priv *priv);
 int arc_mdio_remove(struct arc_emac_priv *priv);
+int arc_emac_probe(struct net_device *ndev, int interface);
+int arc_emac_remove(struct net_device *ndev);
 
 #endif /* ARC_EMAC_H */
diff --git a/drivers/net/ethernet/arc/emac_arc.c b/drivers/net/ethernet/arc/emac_arc.c
new file mode 100644
index 000000000000..f9cb99bfb511
--- /dev/null
+++ b/drivers/net/ethernet/arc/emac_arc.c
@@ -0,0 +1,95 @@
+/**
+ * emac_arc.c - ARC EMAC specific glue layer
+ *
+ * Copyright (C) 2014 Romain Perier
+ *
+ * Romain Perier  <romain.perier@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/module.h>
+#include <linux/of_net.h>
+#include <linux/platform_device.h>
+
+#include "emac.h"
+
+#define DRV_NAME    "emac_arc"
+#define DRV_VERSION "1.0"
+
+static int emac_arc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct net_device *ndev;
+	struct arc_emac_priv *priv;
+	int interface, err;
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	ndev = alloc_etherdev(sizeof(struct arc_emac_priv));
+	if (!ndev)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, ndev);
+	SET_NETDEV_DEV(ndev, dev);
+
+	priv = netdev_priv(ndev);
+	priv->drv_name = DRV_NAME;
+	priv->drv_version = DRV_VERSION;
+
+	interface = of_get_phy_mode(dev->of_node);
+	if (interface < 0)
+		interface = PHY_INTERFACE_MODE_MII;
+
+	priv->clk = devm_clk_get(dev, "hclk");
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "failed to retrieve host clock from device tree\n");
+		err = -EINVAL;
+		goto out_netdev;
+	}
+
+	err = arc_emac_probe(ndev, interface);
+out_netdev:
+	if (err)
+		free_netdev(ndev);
+	return err;
+}
+
+static int emac_arc_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	int err;
+
+	err = arc_emac_remove(ndev);
+	free_netdev(ndev);
+	return err;
+}
+
+static const struct of_device_id emac_arc_dt_ids[] = {
+	{ .compatible = "snps,arc-emac" },
+	{ /* Sentinel */ }
+};
+
+static struct platform_driver emac_arc_driver = {
+	.probe = emac_arc_probe,
+	.remove = emac_arc_remove,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table  = emac_arc_dt_ids,
+	},
+};
+
+module_platform_driver(emac_arc_driver);
+
+MODULE_AUTHOR("Romain Perier <romain.perier@gmail.com>");
+MODULE_DESCRIPTION("ARC EMAC platform driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c
index 5919394d9f58..abe1eabc0171 100644
--- a/drivers/net/ethernet/arc/emac_main.c
+++ b/drivers/net/ethernet/arc/emac_main.c
@@ -26,8 +26,6 @@
 
 #include "emac.h"
 
-#define DRV_NAME	"arc_emac"
-#define DRV_VERSION	"1.0"
 
 /**
  * arc_emac_tx_avail - Return the number of available slots in the tx ring.
@@ -61,6 +59,8 @@ static void arc_emac_adjust_link(struct net_device *ndev)
 	if (priv->speed != phy_dev->speed) {
 		priv->speed = phy_dev->speed;
 		state_changed = 1;
+		if (priv->set_mac_speed)
+			priv->set_mac_speed(priv, priv->speed);
 	}
 
 	if (priv->duplex != phy_dev->duplex) {
@@ -131,8 +131,10 @@ static int arc_emac_set_settings(struct net_device *ndev,
 static void arc_emac_get_drvinfo(struct net_device *ndev,
 				 struct ethtool_drvinfo *info)
 {
-	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
-	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+	struct arc_emac_priv *priv = netdev_priv(ndev);
+
+	strlcpy(info->driver, priv->drv_name, sizeof(info->driver));
+	strlcpy(info->version, priv->drv_version, sizeof(info->version));
 }
 
 static const struct ethtool_ops arc_emac_ethtool_ops = {
@@ -692,46 +694,38 @@ static const struct net_device_ops arc_emac_netdev_ops = {
 #endif
 };
 
-static int arc_emac_probe(struct platform_device *pdev)
+int arc_emac_probe(struct net_device *ndev, int interface)
 {
+	struct device *dev = ndev->dev.parent;
 	struct resource res_regs;
 	struct device_node *phy_node;
 	struct arc_emac_priv *priv;
-	struct net_device *ndev;
 	const char *mac_addr;
 	unsigned int id, clock_frequency, irq;
 	int err;
 
-	if (!pdev->dev.of_node)
-		return -ENODEV;
 
 	/* Get PHY from device tree */
-	phy_node = of_parse_phandle(pdev->dev.of_node, "phy", 0);
+	phy_node = of_parse_phandle(dev->of_node, "phy", 0);
 	if (!phy_node) {
-		dev_err(&pdev->dev, "failed to retrieve phy description from device tree\n");
+		dev_err(dev, "failed to retrieve phy description from device tree\n");
 		return -ENODEV;
 	}
 
 	/* Get EMAC registers base address from device tree */
-	err = of_address_to_resource(pdev->dev.of_node, 0, &res_regs);
+	err = of_address_to_resource(dev->of_node, 0, &res_regs);
 	if (err) {
-		dev_err(&pdev->dev, "failed to retrieve registers base from device tree\n");
+		dev_err(dev, "failed to retrieve registers base from device tree\n");
 		return -ENODEV;
 	}
 
 	/* Get IRQ from device tree */
-	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	irq = irq_of_parse_and_map(dev->of_node, 0);
 	if (!irq) {
-		dev_err(&pdev->dev, "failed to retrieve <irq> value from device tree\n");
+		dev_err(dev, "failed to retrieve <irq> value from device tree\n");
 		return -ENODEV;
 	}
 
-	ndev = alloc_etherdev(sizeof(struct arc_emac_priv));
-	if (!ndev)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, ndev);
-	SET_NETDEV_DEV(ndev, &pdev->dev);
 
 	ndev->netdev_ops = &arc_emac_netdev_ops;
 	ndev->ethtool_ops = &arc_emac_ethtool_ops;
@@ -740,60 +734,57 @@ static int arc_emac_probe(struct platform_device *pdev)
 	ndev->flags &= ~IFF_MULTICAST;
 
 	priv = netdev_priv(ndev);
-	priv->dev = &pdev->dev;
+	priv->dev = dev;
 
-	priv->regs = devm_ioremap_resource(&pdev->dev, &res_regs);
+	priv->regs = devm_ioremap_resource(dev, &res_regs);
 	if (IS_ERR(priv->regs)) {
-		err = PTR_ERR(priv->regs);
-		goto out_netdev;
+		return PTR_ERR(priv->regs);
 	}
-	dev_dbg(&pdev->dev, "Registers base address is 0x%p\n", priv->regs);
+	dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs);
 
-	priv->clk = of_clk_get(pdev->dev.of_node, 0);
-	if (IS_ERR(priv->clk)) {
-		/* Get CPU clock frequency from device tree */
-		if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
-					&clock_frequency)) {
-			dev_err(&pdev->dev, "failed to retrieve <clock-frequency> from device tree\n");
-			err = -EINVAL;
-			goto out_netdev;
-		}
-	} else {
+	if (priv->clk) {
 		err = clk_prepare_enable(priv->clk);
 		if (err) {
-			dev_err(&pdev->dev, "failed to enable clock\n");
-			goto out_clkget;
+			dev_err(dev, "failed to enable clock\n");
+			return err;
 		}
 
 		clock_frequency = clk_get_rate(priv->clk);
+	} else {
+		/* Get CPU clock frequency from device tree */
+		if (of_property_read_u32(dev->of_node, "clock-frequency",
+					 &clock_frequency)) {
+			dev_err(dev, "failed to retrieve <clock-frequency> from device tree\n");
+			return -EINVAL;
+		}
 	}
 
 	id = arc_reg_get(priv, R_ID);
 
 	/* Check for EMAC revision 5 or 7, magic number */
 	if (!(id == 0x0005fd02 || id == 0x0007fd02)) {
-		dev_err(&pdev->dev, "ARC EMAC not detected, id=0x%x\n", id);
+		dev_err(dev, "ARC EMAC not detected, id=0x%x\n", id);
 		err = -ENODEV;
 		goto out_clken;
 	}
-	dev_info(&pdev->dev, "ARC EMAC detected with id: 0x%x\n", id);
+	dev_info(dev, "ARC EMAC detected with id: 0x%x\n", id);
 
 	/* Set poll rate so that it polls every 1 ms */
 	arc_reg_set(priv, R_POLLRATE, clock_frequency / 1000000);
 
 	ndev->irq = irq;
-	dev_info(&pdev->dev, "IRQ is %d\n", ndev->irq);
+	dev_info(dev, "IRQ is %d\n", ndev->irq);
 
 	/* Register interrupt handler for device */
-	err = devm_request_irq(&pdev->dev, ndev->irq, arc_emac_intr, 0,
+	err = devm_request_irq(dev, ndev->irq, arc_emac_intr, 0,
 			       ndev->name, ndev);
 	if (err) {
-		dev_err(&pdev->dev, "could not allocate IRQ\n");
+		dev_err(dev, "could not allocate IRQ\n");
 		goto out_clken;
 	}
 
 	/* Get MAC address from device tree */
-	mac_addr = of_get_mac_address(pdev->dev.of_node);
+	mac_addr = of_get_mac_address(dev->of_node);
 
 	if (mac_addr)
 		memcpy(ndev->dev_addr, mac_addr, ETH_ALEN);
@@ -801,14 +792,14 @@ static int arc_emac_probe(struct platform_device *pdev)
 		eth_hw_addr_random(ndev);
 
 	arc_emac_set_address_internal(ndev);
-	dev_info(&pdev->dev, "MAC address is now %pM\n", ndev->dev_addr);
+	dev_info(dev, "MAC address is now %pM\n", ndev->dev_addr);
 
 	/* Do 1 allocation instead of 2 separate ones for Rx and Tx BD rings */
-	priv->rxbd = dmam_alloc_coherent(&pdev->dev, RX_RING_SZ + TX_RING_SZ,
+	priv->rxbd = dmam_alloc_coherent(dev, RX_RING_SZ + TX_RING_SZ,
 					 &priv->rxbd_dma, GFP_KERNEL);
 
 	if (!priv->rxbd) {
-		dev_err(&pdev->dev, "failed to allocate data buffers\n");
+		dev_err(dev, "failed to allocate data buffers\n");
 		err = -ENOMEM;
 		goto out_clken;
 	}
@@ -816,31 +807,31 @@ static int arc_emac_probe(struct platform_device *pdev)
 	priv->txbd = priv->rxbd + RX_BD_NUM;
 
 	priv->txbd_dma = priv->rxbd_dma + RX_RING_SZ;
-	dev_dbg(&pdev->dev, "EMAC Device addr: Rx Ring [0x%x], Tx Ring[%x]\n",
+	dev_dbg(dev, "EMAC Device addr: Rx Ring [0x%x], Tx Ring[%x]\n",
 		(unsigned int)priv->rxbd_dma, (unsigned int)priv->txbd_dma);
 
-	err = arc_mdio_probe(pdev, priv);
+	err = arc_mdio_probe(priv);
 	if (err) {
-		dev_err(&pdev->dev, "failed to probe MII bus\n");
+		dev_err(dev, "failed to probe MII bus\n");
 		goto out_clken;
 	}
 
 	priv->phy_dev = of_phy_connect(ndev, phy_node, arc_emac_adjust_link, 0,
-				       PHY_INTERFACE_MODE_MII);
+				       interface);
 	if (!priv->phy_dev) {
-		dev_err(&pdev->dev, "of_phy_connect() failed\n");
+		dev_err(dev, "of_phy_connect() failed\n");
 		err = -ENODEV;
 		goto out_mdio;
 	}
 
-	dev_info(&pdev->dev, "connected to %s phy with id 0x%x\n",
+	dev_info(dev, "connected to %s phy with id 0x%x\n",
 		 priv->phy_dev->drv->name, priv->phy_dev->phy_id);
 
 	netif_napi_add(ndev, &priv->napi, arc_emac_poll, ARC_EMAC_NAPI_WEIGHT);
 
 	err = register_netdev(ndev);
 	if (err) {
-		dev_err(&pdev->dev, "failed to register network device\n");
+		dev_err(dev, "failed to register network device\n");
 		goto out_netif_api;
 	}
 
@@ -853,19 +844,14 @@ out_netif_api:
 out_mdio:
 	arc_mdio_remove(priv);
 out_clken:
-	if (!IS_ERR(priv->clk))
+	if (priv->clk)
 		clk_disable_unprepare(priv->clk);
-out_clkget:
-	if (!IS_ERR(priv->clk))
-		clk_put(priv->clk);
-out_netdev:
-	free_netdev(ndev);
 	return err;
 }
+EXPORT_SYMBOL_GPL(arc_emac_probe);
 
-static int arc_emac_remove(struct platform_device *pdev)
+int arc_emac_remove(struct net_device *ndev)
 {
-	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct arc_emac_priv *priv = netdev_priv(ndev);
 
 	phy_disconnect(priv->phy_dev);
@@ -876,31 +862,12 @@ static int arc_emac_remove(struct platform_device *pdev)
 
 	if (!IS_ERR(priv->clk)) {
 		clk_disable_unprepare(priv->clk);
-		clk_put(priv->clk);
 	}
 
-	free_netdev(ndev);
 
 	return 0;
 }
-
-static const struct of_device_id arc_emac_dt_ids[] = {
-	{ .compatible = "snps,arc-emac" },
-	{ /* Sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, arc_emac_dt_ids);
-
-static struct platform_driver arc_emac_driver = {
-	.probe = arc_emac_probe,
-	.remove = arc_emac_remove,
-	.driver = {
-		.name = DRV_NAME,
-		.owner = THIS_MODULE,
-		.of_match_table  = arc_emac_dt_ids,
-		},
-};
-
-module_platform_driver(arc_emac_driver);
+EXPORT_SYMBOL_GPL(arc_emac_remove);
 
 MODULE_AUTHOR("Alexey Brodkin <abrodkin@synopsys.com>");
 MODULE_DESCRIPTION("ARC EMAC driver");
diff --git a/drivers/net/ethernet/arc/emac_mdio.c b/drivers/net/ethernet/arc/emac_mdio.c
index 26ba2423f33a..d5ee986936da 100644
--- a/drivers/net/ethernet/arc/emac_mdio.c
+++ b/drivers/net/ethernet/arc/emac_mdio.c
@@ -100,7 +100,6 @@ static int arc_mdio_write(struct mii_bus *bus, int phy_addr,
 
 /**
  * arc_mdio_probe - MDIO probe function.
- * @pdev:	Pointer to platform device.
  * @priv:	Pointer to ARC EMAC private data structure.
  *
  * returns:	0 on success, -ENOMEM when mdiobus_alloc
@@ -108,7 +107,7 @@ static int arc_mdio_write(struct mii_bus *bus, int phy_addr,
  *
  * Sets up and registers the MDIO interface.
  */
-int arc_mdio_probe(struct platform_device *pdev, struct arc_emac_priv *priv)
+int arc_mdio_probe(struct arc_emac_priv *priv)
 {
 	struct mii_bus *bus;
 	int error;
@@ -124,9 +123,9 @@ int arc_mdio_probe(struct platform_device *pdev, struct arc_emac_priv *priv)
 	bus->read = &arc_mdio_read;
 	bus->write = &arc_mdio_write;
 
-	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", bus->name);
 
-	error = of_mdiobus_register(bus, pdev->dev.of_node);
+	error = of_mdiobus_register(bus, priv->dev->of_node);
 	if (error) {
 		dev_err(priv->dev, "cannot register MDIO bus %s\n", bus->name);
 		mdiobus_free(bus);
diff --git a/drivers/net/ethernet/arc/emac_rockchip.c b/drivers/net/ethernet/arc/emac_rockchip.c
new file mode 100644
index 000000000000..c31c7407b753
--- /dev/null
+++ b/drivers/net/ethernet/arc/emac_rockchip.c
@@ -0,0 +1,229 @@
+/**
+ * emac-rockchip.c - Rockchip EMAC specific glue layer
+ *
+ * Copyright (C) 2014 Romain Perier <romain.perier@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_net.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#include "emac.h"
+
+#define DRV_NAME        "rockchip_emac"
+#define DRV_VERSION     "1.0"
+
+#define GRF_MODE_MII		(1UL << 0)
+#define GRF_MODE_RMII		(0UL << 0)
+#define GRF_SPEED_10M		(0UL << 1)
+#define GRF_SPEED_100M		(1UL << 1)
+#define GRF_SPEED_ENABLE_BIT	(1UL << 17)
+#define GRF_MODE_ENABLE_BIT	(1UL << 16)
+
+struct emac_rockchip_soc_data {
+	int grf_offset;
+};
+
+struct rockchip_priv_data {
+	struct arc_emac_priv emac;
+	struct regmap *grf;
+	const struct emac_rockchip_soc_data *soc_data;
+	struct regulator *regulator;
+	struct clk *refclk;
+};
+
+static void emac_rockchip_set_mac_speed(void *priv, unsigned int speed)
+{
+	struct rockchip_priv_data *emac = priv;
+	u32 data;
+	int err = 0;
+
+	/* write-enable bits */
+	data = GRF_SPEED_ENABLE_BIT;
+
+	switch(speed) {
+	case 10:
+		data |= GRF_SPEED_10M;
+		break;
+	case 100:
+		data |= GRF_SPEED_100M;
+		break;
+	default:
+		pr_err("speed %u not supported\n", speed);
+		return;
+	}
+
+	err = regmap_write(emac->grf, emac->soc_data->grf_offset, data);
+	if (err)
+		pr_err("unable to apply speed %u to grf (%d)\n", speed, err);
+}
+
+static const struct emac_rockchip_soc_data emac_rockchip_dt_data[] = {
+	{ .grf_offset = 0x154 }, /* rk3066 */
+	{ .grf_offset = 0x0a4 }, /* rk3188 */
+};
+
+static const struct of_device_id emac_rockchip_dt_ids[] = {
+	{ .compatible = "rockchip,rk3066-emac", .data = &emac_rockchip_dt_data[0] },
+	{ .compatible = "rockchip,rk3188-emac", .data = &emac_rockchip_dt_data[1] },
+	{ /* Sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, emac_rockchip_dt_ids);
+
+static int emac_rockchip_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct net_device *ndev;
+	struct rockchip_priv_data *priv;
+	const struct of_device_id *match;
+	u32 data;
+	int err, interface;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	ndev = alloc_etherdev(sizeof(struct rockchip_priv_data));
+	if (!ndev)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, ndev);
+	SET_NETDEV_DEV(ndev, dev);
+
+	priv = netdev_priv(ndev);
+	priv->emac.drv_name = DRV_NAME;
+	priv->emac.drv_version = DRV_VERSION;
+	priv->emac.set_mac_speed = emac_rockchip_set_mac_speed;
+
+	interface = of_get_phy_mode(dev->of_node);
+
+	/* RK3066 and RK3188 SoCs only support RMII */
+	if (interface != PHY_INTERFACE_MODE_RMII) {
+		dev_err(dev, "unsupported phy interface mode %d\n", interface);
+		err = -ENOTSUPP;
+		goto out_netdev;
+	}
+
+	priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
+	if (IS_ERR(priv->grf)) {
+		dev_err(dev, "failed to retrieve global register file (%ld)\n", PTR_ERR(priv->grf));
+		err = PTR_ERR(priv->grf);
+		goto out_netdev;
+	}
+
+	match = of_match_node(emac_rockchip_dt_ids, dev->of_node);
+	priv->soc_data = match->data;
+
+	priv->emac.clk = devm_clk_get(dev, "hclk");
+	if (IS_ERR(priv->emac.clk)) {
+		dev_err(dev, "failed to retrieve host clock (%ld)\n", PTR_ERR(priv->emac.clk));
+		err = PTR_ERR(priv->emac.clk);
+		goto out_netdev;
+	}
+
+	priv->refclk = devm_clk_get(dev, "macref");
+	if (IS_ERR(priv->refclk)) {
+		dev_err(dev, "failed to retrieve reference clock (%ld)\n", PTR_ERR(priv->refclk));
+		err = PTR_ERR(priv->refclk);
+		goto out_netdev;
+	}
+
+	err = clk_prepare_enable(priv->refclk);
+	if (err) {
+		dev_err(dev, "failed to enable reference clock (%d)\n", err);
+		goto out_netdev;
+	}
+
+	/* Optional regulator for PHY */
+	priv->regulator = devm_regulator_get_optional(dev, "phy");
+	if (IS_ERR(priv->regulator)) {
+		if (PTR_ERR(priv->regulator) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_err(dev, "no regulator found\n");
+		priv->regulator = NULL;
+	}
+
+	if (priv->regulator) {
+		err = regulator_enable(priv->regulator);
+		if (err) {
+			dev_err(dev, "failed to enable phy-supply (%d)\n", err);
+			goto out_clk_disable;
+		}
+	}
+
+	err = arc_emac_probe(ndev, interface);
+	if (err)
+		goto out_regulator_disable;
+
+	/* write-enable bits */
+	data = GRF_MODE_ENABLE_BIT | GRF_SPEED_ENABLE_BIT;
+
+	data |= GRF_SPEED_100M;
+	data |= GRF_MODE_RMII;
+
+	err = regmap_write(priv->grf, priv->soc_data->grf_offset, data);
+	if (err) {
+		dev_err(dev, "unable to apply initial settings to grf (%d)\n", err);
+		goto out_regulator_disable;
+	}
+
+	/* RMII interface needs always a rate of 50MHz */
+	err = clk_set_rate(priv->refclk, 50000000);
+	if (err)
+		dev_err(dev, "failed to change reference clock rate (%d)\n", err);
+	return 0;
+
+out_regulator_disable:
+	if (priv->regulator)
+		regulator_disable(priv->regulator);
+out_clk_disable:
+	clk_disable_unprepare(priv->refclk);
+out_netdev:
+	free_netdev(ndev);
+	return err;
+}
+
+static int emac_rockchip_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct rockchip_priv_data *priv = netdev_priv(ndev);
+	int err;
+
+	err = arc_emac_remove(ndev);
+
+	clk_disable_unprepare(priv->refclk);
+
+	if (priv->regulator)
+		regulator_disable(priv->regulator);
+
+	free_netdev(ndev);
+	return err;
+}
+
+static struct platform_driver emac_rockchip_driver = {
+	.probe = emac_rockchip_probe,
+	.remove = emac_rockchip_remove,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table  = emac_rockchip_dt_ids,
+	},
+};
+
+module_platform_driver(emac_rockchip_driver);
+
+MODULE_AUTHOR("Romain Perier <romain.perier@gmail.com>");
+MODULE_DESCRIPTION("Rockchip EMAC platform driver");
+MODULE_LICENSE("GPL");