Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.

 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
    Benniston.

 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
    Mork.

 4) BPF now has a "random" opcode, from Chema Gonzalez.

 5) Add more BPF documentation and improve test framework, from Daniel
    Borkmann.

 6) Support TCP fastopen over ipv6, from Daniel Lee.

 7) Add software TSO helper functions and use them to support software
    TSO in mvneta and mv643xx_eth drivers.  From Ezequiel Garcia.

 8) Support software TSO in fec driver too, from Nimrod Andy.

 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.

10) Handle broadcasts more gracefully over macvlan when there are large
    numbers of interfaces configured, from Herbert Xu.

11) Allow more control over fwmark used for non-socket based responses,
    from Lorenzo Colitti.

12) Do TCP congestion window limiting based upon measurements, from Neal
    Cardwell.

13) Support busy polling in SCTP, from Neal Horman.

14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.

15) Bridge promisc mode handling improvements from Vlad Yasevich.

16) Don't use inetpeer entries to implement ID generation any more, it
    performs poorly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
  tcp: fixing TLP's FIN recovery
  net: fec: Add software TSO support
  net: fec: Add Scatter/gather support
  net: fec: Increase buffer descriptor entry number
  net: fec: Factorize feature setting
  net: fec: Enable IP header hardware checksum
  net: fec: Factorize the .xmit transmit function
  bridge: fix compile error when compiling without IPv6 support
  bridge: fix smatch warning / potential null pointer dereference
  via-rhine: fix full-duplex with autoneg disable
  bnx2x: Enlarge the dorq threshold for VFs
  bnx2x: Check for UNDI in uncommon branch
  bnx2x: Fix 1G-baseT link
  bnx2x: Fix link for KR with swapped polarity lane
  sctp: Fix sk_ack_backlog wrap-around problem
  net/core: Add VF link state control policy
  net/fsl: xgmac_mdio is dependent on OF_MDIO
  net/fsl: Make xgmac_mdio read error message useful
  net_sched: drr: warn when qdisc is not work conserving
  ...

7 files changed, 217 insertions, 329 deletions

diff --git a/drivers/isdn/capi/Kconfig b/drivers/isdn/capi/Kconfig
index 9816c51eb5c2..7641b3096ea6 100644
--- a/drivers/isdn/capi/Kconfig
+++ b/drivers/isdn/capi/Kconfig
@@ -1,11 +1,3 @@
-config ISDN_DRV_AVMB1_VERBOSE_REASON
-	bool "Verbose reason code reporting"
-	default y
-	help
-	  If you say Y here, the CAPI drivers will give verbose reasons for
-	  disconnecting. This will increase the size of the kernel by 7 KB. If
-	  unsure, say Y.
-
 config CAPI_TRACE
 	bool "CAPI trace support"
 	default y
@@ -17,7 +9,7 @@ config CAPI_TRACE
 	  If unsure, say Y.
 
 config ISDN_CAPI_CAPI20
-	tristate "CAPI2.0 /dev/capi support"
+	tristate "CAPI2.0 /dev/capi20 support"
 	help
 	  This option will provide the CAPI 2.0 interface to userspace
 	  applications via /dev/capi20. Applications should use the
@@ -42,3 +34,11 @@ config ISDN_CAPI_CAPIDRV
 	  the legacy isdn4linux link layer.  If you have a card which is
 	  supported by a CAPI driver, but still want to use old features like
 	  ippp interfaces or ttyI emulation, say Y/M here.
+
+config ISDN_CAPI_CAPIDRV_VERBOSE
+	bool "Verbose reason code reporting"
+	depends on ISDN_CAPI_CAPIDRV
+	help
+	  If you say Y here, the capidrv interface will give verbose reasons
+	  for disconnecting. This will increase the size of the kernel by 7 KB.
+	  If unsure, say N.
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index ac6f72b455d1..f9a87ed2392b 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1271,7 +1271,7 @@ static int __init capinc_tty_init(void)
 		return -ENOMEM;
 	}
 	drv->driver_name = "capi_nc";
-	drv->name = "capi";
+	drv->name = "capi!";
 	drv->major = 0;
 	drv->minor_start = 0;
 	drv->type = TTY_DRIVER_TYPE_SERIAL;
@@ -1417,7 +1417,7 @@ static int __init capi_init(void)
 		return PTR_ERR(capi_class);
 	}
 
-	device_create(capi_class, NULL, MKDEV(capi_major, 0), NULL, "capi");
+	device_create(capi_class, NULL, MKDEV(capi_major, 0), NULL, "capi20");
 
 	if (capinc_tty_init() < 0) {
 		device_destroy(capi_class, MKDEV(capi_major, 0));
diff --git a/drivers/isdn/capi/capidrv.c b/drivers/isdn/capi/capidrv.c
index cc9f1927a322..fd6d28f3fc36 100644
--- a/drivers/isdn/capi/capidrv.c
+++ b/drivers/isdn/capi/capidrv.c
@@ -763,6 +763,201 @@ static inline int new_bchan(capidrv_contr *card)
 }
 
 /* ------------------------------------------------------------------- */
+static char *capi_info2str(u16 reason)
+{
+#ifndef CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE
+	return "..";
+#else
+	switch (reason) {
+
+/*-- informative values (corresponding message was processed) -----*/
+	case 0x0001:
+		return "NCPI not supported by current protocol, NCPI ignored";
+	case 0x0002:
+		return "Flags not supported by current protocol, flags ignored";
+	case 0x0003:
+		return "Alert already sent by another application";
+
+/*-- error information concerning CAPI_REGISTER -----*/
+	case 0x1001:
+		return "Too many applications";
+	case 0x1002:
+		return "Logical block size too small, must be at least 128 Bytes";
+	case 0x1003:
+		return "Buffer exceeds 64 kByte";
+	case 0x1004:
+		return "Message buffer size too small, must be at least 1024 Bytes";
+	case 0x1005:
+		return "Max. number of logical connections not supported";
+	case 0x1006:
+		return "Reserved";
+	case 0x1007:
+		return "The message could not be accepted because of an internal busy condition";
+	case 0x1008:
+		return "OS resource error (no memory ?)";
+	case 0x1009:
+		return "CAPI not installed";
+	case 0x100A:
+		return "Controller does not support external equipment";
+	case 0x100B:
+		return "Controller does only support external equipment";
+
+/*-- error information concerning message exchange functions -----*/
+	case 0x1101:
+		return "Illegal application number";
+	case 0x1102:
+		return "Illegal command or subcommand or message length less than 12 bytes";
+	case 0x1103:
+		return "The message could not be accepted because of a queue full condition !! The error code does not imply that CAPI cannot receive messages directed to another controller, PLCI or NCCI";
+	case 0x1104:
+		return "Queue is empty";
+	case 0x1105:
+		return "Queue overflow, a message was lost !! This indicates a configuration error. The only recovery from this error is to perform a CAPI_RELEASE";
+	case 0x1106:
+		return "Unknown notification parameter";
+	case 0x1107:
+		return "The Message could not be accepted because of an internal busy condition";
+	case 0x1108:
+		return "OS Resource error (no memory ?)";
+	case 0x1109:
+		return "CAPI not installed";
+	case 0x110A:
+		return "Controller does not support external equipment";
+	case 0x110B:
+		return "Controller does only support external equipment";
+
+/*-- error information concerning resource / coding problems -----*/
+	case 0x2001:
+		return "Message not supported in current state";
+	case 0x2002:
+		return "Illegal Controller / PLCI / NCCI";
+	case 0x2003:
+		return "Out of PLCI";
+	case 0x2004:
+		return "Out of NCCI";
+	case 0x2005:
+		return "Out of LISTEN";
+	case 0x2006:
+		return "Out of FAX resources (protocol T.30)";
+	case 0x2007:
+		return "Illegal message parameter coding";
+
+/*-- error information concerning requested services  -----*/
+	case 0x3001:
+		return "B1 protocol not supported";
+	case 0x3002:
+		return "B2 protocol not supported";
+	case 0x3003:
+		return "B3 protocol not supported";
+	case 0x3004:
+		return "B1 protocol parameter not supported";
+	case 0x3005:
+		return "B2 protocol parameter not supported";
+	case 0x3006:
+		return "B3 protocol parameter not supported";
+	case 0x3007:
+		return "B protocol combination not supported";
+	case 0x3008:
+		return "NCPI not supported";
+	case 0x3009:
+		return "CIP Value unknown";
+	case 0x300A:
+		return "Flags not supported (reserved bits)";
+	case 0x300B:
+		return "Facility not supported";
+	case 0x300C:
+		return "Data length not supported by current protocol";
+	case 0x300D:
+		return "Reset procedure not supported by current protocol";
+
+/*-- informations about the clearing of a physical connection -----*/
+	case 0x3301:
+		return "Protocol error layer 1 (broken line or B-channel removed by signalling protocol)";
+	case 0x3302:
+		return "Protocol error layer 2";
+	case 0x3303:
+		return "Protocol error layer 3";
+	case 0x3304:
+		return "Another application got that call";
+/*-- T.30 specific reasons -----*/
+	case 0x3311:
+		return "Connecting not successful (remote station is no FAX G3 machine)";
+	case 0x3312:
+		return "Connecting not successful (training error)";
+	case 0x3313:
+		return "Disconnected before transfer (remote station does not support transfer mode, e.g. resolution)";
+	case 0x3314:
+		return "Disconnected during transfer (remote abort)";
+	case 0x3315:
+		return "Disconnected during transfer (remote procedure error, e.g. unsuccessful repetition of T.30 commands)";
+	case 0x3316:
+		return "Disconnected during transfer (local tx data underrun)";
+	case 0x3317:
+		return "Disconnected during transfer (local rx data overflow)";
+	case 0x3318:
+		return "Disconnected during transfer (local abort)";
+	case 0x3319:
+		return "Illegal parameter coding (e.g. SFF coding error)";
+
+/*-- disconnect causes from the network according to ETS 300 102-1/Q.931 -----*/
+	case 0x3481: return "Unallocated (unassigned) number";
+	case 0x3482: return "No route to specified transit network";
+	case 0x3483: return "No route to destination";
+	case 0x3486: return "Channel unacceptable";
+	case 0x3487:
+		return "Call awarded and being delivered in an established channel";
+	case 0x3490: return "Normal call clearing";
+	case 0x3491: return "User busy";
+	case 0x3492: return "No user responding";
+	case 0x3493: return "No answer from user (user alerted)";
+	case 0x3495: return "Call rejected";
+	case 0x3496: return "Number changed";
+	case 0x349A: return "Non-selected user clearing";
+	case 0x349B: return "Destination out of order";
+	case 0x349C: return "Invalid number format";
+	case 0x349D: return "Facility rejected";
+	case 0x349E: return "Response to STATUS ENQUIRY";
+	case 0x349F: return "Normal, unspecified";
+	case 0x34A2: return "No circuit / channel available";
+	case 0x34A6: return "Network out of order";
+	case 0x34A9: return "Temporary failure";
+	case 0x34AA: return "Switching equipment congestion";
+	case 0x34AB: return "Access information discarded";
+	case 0x34AC: return "Requested circuit / channel not available";
+	case 0x34AF: return "Resources unavailable, unspecified";
+	case 0x34B1: return "Quality of service unavailable";
+	case 0x34B2: return "Requested facility not subscribed";
+	case 0x34B9: return "Bearer capability not authorized";
+	case 0x34BA: return "Bearer capability not presently available";
+	case 0x34BF: return "Service or option not available, unspecified";
+	case 0x34C1: return "Bearer capability not implemented";
+	case 0x34C2: return "Channel type not implemented";
+	case 0x34C5: return "Requested facility not implemented";
+	case 0x34C6: return "Only restricted digital information bearer capability is available";
+	case 0x34CF: return "Service or option not implemented, unspecified";
+	case 0x34D1: return "Invalid call reference value";
+	case 0x34D2: return "Identified channel does not exist";
+	case 0x34D3: return "A suspended call exists, but this call identity does not";
+	case 0x34D4: return "Call identity in use";
+	case 0x34D5: return "No call suspended";
+	case 0x34D6: return "Call having the requested call identity has been cleared";
+	case 0x34D8: return "Incompatible destination";
+	case 0x34DB: return "Invalid transit network selection";
+	case 0x34DF: return "Invalid message, unspecified";
+	case 0x34E0: return "Mandatory information element is missing";
+	case 0x34E1: return "Message type non-existent or not implemented";
+	case 0x34E2: return "Message not compatible with call state or message type non-existent or not implemented";
+	case 0x34E3: return "Information element non-existent or not implemented";
+	case 0x34E4: return "Invalid information element contents";
+	case 0x34E5: return "Message not compatible with call state";
+	case 0x34E6: return "Recovery on timer expiry";
+	case 0x34EF: return "Protocol error, unspecified";
+	case 0x34FF: return "Interworking, unspecified";
+
+	default: return "No additional information";
+	}
+#endif
+}
 
 static void handle_controller(_cmsg *cmsg)
 {
diff --git a/drivers/isdn/capi/capiutil.c b/drivers/isdn/capi/capiutil.c
index d26f17033b68..6e797e502cfa 100644
--- a/drivers/isdn/capi/capiutil.c
+++ b/drivers/isdn/capi/capiutil.c
@@ -22,205 +22,6 @@
 
 /* from CAPI2.0 DDK AVM Berlin GmbH */
 
-#ifndef CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
-char *capi_info2str(u16 reason)
-{
-	return "..";
-}
-#else
-char *capi_info2str(u16 reason)
-{
-	switch (reason) {
-
-/*-- informative values (corresponding message was processed) -----*/
-	case 0x0001:
-		return "NCPI not supported by current protocol, NCPI ignored";
-	case 0x0002:
-		return "Flags not supported by current protocol, flags ignored";
-	case 0x0003:
-		return "Alert already sent by another application";
-
-/*-- error information concerning CAPI_REGISTER -----*/
-	case 0x1001:
-		return "Too many applications";
-	case 0x1002:
-		return "Logical block size too small, must be at least 128 Bytes";
-	case 0x1003:
-		return "Buffer exceeds 64 kByte";
-	case 0x1004:
-		return "Message buffer size too small, must be at least 1024 Bytes";
-	case 0x1005:
-		return "Max. number of logical connections not supported";
-	case 0x1006:
-		return "Reserved";
-	case 0x1007:
-		return "The message could not be accepted because of an internal busy condition";
-	case 0x1008:
-		return "OS resource error (no memory ?)";
-	case 0x1009:
-		return "CAPI not installed";
-	case 0x100A:
-		return "Controller does not support external equipment";
-	case 0x100B:
-		return "Controller does only support external equipment";
-
-/*-- error information concerning message exchange functions -----*/
-	case 0x1101:
-		return "Illegal application number";
-	case 0x1102:
-		return "Illegal command or subcommand or message length less than 12 bytes";
-	case 0x1103:
-		return "The message could not be accepted because of a queue full condition !! The error code does not imply that CAPI cannot receive messages directed to another controller, PLCI or NCCI";
-	case 0x1104:
-		return "Queue is empty";
-	case 0x1105:
-		return "Queue overflow, a message was lost !! This indicates a configuration error. The only recovery from this error is to perform a CAPI_RELEASE";
-	case 0x1106:
-		return "Unknown notification parameter";
-	case 0x1107:
-		return "The Message could not be accepted because of an internal busy condition";
-	case 0x1108:
-		return "OS Resource error (no memory ?)";
-	case 0x1109:
-		return "CAPI not installed";
-	case 0x110A:
-		return "Controller does not support external equipment";
-	case 0x110B:
-		return "Controller does only support external equipment";
-
-/*-- error information concerning resource / coding problems -----*/
-	case 0x2001:
-		return "Message not supported in current state";
-	case 0x2002:
-		return "Illegal Controller / PLCI / NCCI";
-	case 0x2003:
-		return "Out of PLCI";
-	case 0x2004:
-		return "Out of NCCI";
-	case 0x2005:
-		return "Out of LISTEN";
-	case 0x2006:
-		return "Out of FAX resources (protocol T.30)";
-	case 0x2007:
-		return "Illegal message parameter coding";
-
-/*-- error information concerning requested services  -----*/
-	case 0x3001:
-		return "B1 protocol not supported";
-	case 0x3002:
-		return "B2 protocol not supported";
-	case 0x3003:
-		return "B3 protocol not supported";
-	case 0x3004:
-		return "B1 protocol parameter not supported";
-	case 0x3005:
-		return "B2 protocol parameter not supported";
-	case 0x3006:
-		return "B3 protocol parameter not supported";
-	case 0x3007:
-		return "B protocol combination not supported";
-	case 0x3008:
-		return "NCPI not supported";
-	case 0x3009:
-		return "CIP Value unknown";
-	case 0x300A:
-		return "Flags not supported (reserved bits)";
-	case 0x300B:
-		return "Facility not supported";
-	case 0x300C:
-		return "Data length not supported by current protocol";
-	case 0x300D:
-		return "Reset procedure not supported by current protocol";
-
-/*-- informations about the clearing of a physical connection -----*/
-	case 0x3301:
-		return "Protocol error layer 1 (broken line or B-channel removed by signalling protocol)";
-	case 0x3302:
-		return "Protocol error layer 2";
-	case 0x3303:
-		return "Protocol error layer 3";
-	case 0x3304:
-		return "Another application got that call";
-/*-- T.30 specific reasons -----*/
-	case 0x3311:
-		return "Connecting not successful (remote station is no FAX G3 machine)";
-	case 0x3312:
-		return "Connecting not successful (training error)";
-	case 0x3313:
-		return "Disconnected before transfer (remote station does not support transfer mode, e.g. resolution)";
-	case 0x3314:
-		return "Disconnected during transfer (remote abort)";
-	case 0x3315:
-		return "Disconnected during transfer (remote procedure error, e.g. unsuccessful repetition of T.30 commands)";
-	case 0x3316:
-		return "Disconnected during transfer (local tx data underrun)";
-	case 0x3317:
-		return "Disconnected during transfer (local rx data overflow)";
-	case 0x3318:
-		return "Disconnected during transfer (local abort)";
-	case 0x3319:
-		return "Illegal parameter coding (e.g. SFF coding error)";
-
-/*-- disconnect causes from the network according to ETS 300 102-1/Q.931 -----*/
-	case 0x3481: return "Unallocated (unassigned) number";
-	case 0x3482: return "No route to specified transit network";
-	case 0x3483: return "No route to destination";
-	case 0x3486: return "Channel unacceptable";
-	case 0x3487:
-		return "Call awarded and being delivered in an established channel";
-	case 0x3490: return "Normal call clearing";
-	case 0x3491: return "User busy";
-	case 0x3492: return "No user responding";
-	case 0x3493: return "No answer from user (user alerted)";
-	case 0x3495: return "Call rejected";
-	case 0x3496: return "Number changed";
-	case 0x349A: return "Non-selected user clearing";
-	case 0x349B: return "Destination out of order";
-	case 0x349C: return "Invalid number format";
-	case 0x349D: return "Facility rejected";
-	case 0x349E: return "Response to STATUS ENQUIRY";
-	case 0x349F: return "Normal, unspecified";
-	case 0x34A2: return "No circuit / channel available";
-	case 0x34A6: return "Network out of order";
-	case 0x34A9: return "Temporary failure";
-	case 0x34AA: return "Switching equipment congestion";
-	case 0x34AB: return "Access information discarded";
-	case 0x34AC: return "Requested circuit / channel not available";
-	case 0x34AF: return "Resources unavailable, unspecified";
-	case 0x34B1: return "Quality of service unavailable";
-	case 0x34B2: return "Requested facility not subscribed";
-	case 0x34B9: return "Bearer capability not authorized";
-	case 0x34BA: return "Bearer capability not presently available";
-	case 0x34BF: return "Service or option not available, unspecified";
-	case 0x34C1: return "Bearer capability not implemented";
-	case 0x34C2: return "Channel type not implemented";
-	case 0x34C5: return "Requested facility not implemented";
-	case 0x34C6: return "Only restricted digital information bearer capability is available";
-	case 0x34CF: return "Service or option not implemented, unspecified";
-	case 0x34D1: return "Invalid call reference value";
-	case 0x34D2: return "Identified channel does not exist";
-	case 0x34D3: return "A suspended call exists, but this call identity does not";
-	case 0x34D4: return "Call identity in use";
-	case 0x34D5: return "No call suspended";
-	case 0x34D6: return "Call having the requested call identity has been cleared";
-	case 0x34D8: return "Incompatible destination";
-	case 0x34DB: return "Invalid transit network selection";
-	case 0x34DF: return "Invalid message, unspecified";
-	case 0x34E0: return "Mandatory information element is missing";
-	case 0x34E1: return "Message type non-existent or not implemented";
-	case 0x34E2: return "Message not compatible with call state or message type non-existent or not implemented";
-	case 0x34E3: return "Information element non-existent or not implemented";
-	case 0x34E4: return "Invalid information element contents";
-	case 0x34E5: return "Message not compatible with call state";
-	case 0x34E6: return "Recovery on timer expiry";
-	case 0x34EF: return "Protocol error, unspecified";
-	case 0x34FF: return "Interworking, unspecified";
-
-	default: return "No additional information";
-	}
-}
-#endif
-
 typedef struct {
 	int typ;
 	size_t off;
@@ -1073,4 +874,3 @@ EXPORT_SYMBOL(capi_cmsg_header);
 EXPORT_SYMBOL(capi_cmd2str);
 EXPORT_SYMBOL(capi_cmsg2str);
 EXPORT_SYMBOL(capi_message2str);
-EXPORT_SYMBOL(capi_info2str);
diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c
index 414dbf6da89a..fc9f9d03fa13 100644
--- a/drivers/isdn/hisax/hfc4s8s_l1.c
+++ b/drivers/isdn/hisax/hfc4s8s_l1.c
@@ -197,25 +197,6 @@ typedef struct _hfc4s8s_hw {
 
 
 
-/***************************/
-/* inline function defines */
-/***************************/
-#ifdef HISAX_HFC4S8S_PCIMEM	/* inline functions memory mapped */
-
-/* memory write and dummy IO read to avoid PCI byte merge problems */
-#define Write_hfc8(a, b, c) {(*((volatile u_char *)(a->membase + b)) = c); inb(a->iobase + 4);}
-/* memory write without dummy IO access for fifo data access */
-#define fWrite_hfc8(a, b, c) (*((volatile u_char *)(a->membase + b)) = c)
-#define Read_hfc8(a, b) (*((volatile u_char *)(a->membase + b)))
-#define Write_hfc16(a, b, c) (*((volatile unsigned short *)(a->membase + b)) = c)
-#define Read_hfc16(a, b) (*((volatile unsigned short *)(a->membase + b)))
-#define Write_hfc32(a, b, c) (*((volatile unsigned long *)(a->membase + b)) = c)
-#define Read_hfc32(a, b) (*((volatile unsigned long *)(a->membase + b)))
-#define wait_busy(a) {while ((Read_hfc8(a, R_STATUS) & M_BUSY));}
-#define PCI_ENA_MEMIO	0x03
-
-#else
-
 /* inline functions io mapped */
 static inline void
 SetRegAddr(hfc4s8s_hw *a, u_char b)
@@ -306,8 +287,6 @@ wait_busy(hfc4s8s_hw *a)
 
 #define PCI_ENA_REGIO	0x01
 
-#endif				/* HISAX_HFC4S8S_PCIMEM */
-
 /******************************************************/
 /* function to read critical counter registers that   */
 /* may be updated by the chip during read             */
@@ -724,26 +703,15 @@ rx_d_frame(struct hfc4s8s_l1 *l1p, int ech)
 				return;
 			} else {
 				/* read errornous D frame */
-
-#ifndef HISAX_HFC4S8S_PCIMEM
 				SetRegAddr(l1p->hw, A_FIFO_DATA0);
-#endif
 
 				while (z1 >= 4) {
-#ifdef HISAX_HFC4S8S_PCIMEM
-					Read_hfc32(l1p->hw, A_FIFO_DATA0);
-#else
 					fRead_hfc32(l1p->hw);
-#endif
 					z1 -= 4;
 				}
 
 				while (z1--)
-#ifdef HISAX_HFC4S8S_PCIMEM
-					Read_hfc8(l1p->hw, A_FIFO_DATA0);
-#else
-				fRead_hfc8(l1p->hw);
-#endif
+					fRead_hfc8(l1p->hw);
 
 				Write_hfc8(l1p->hw, A_INC_RES_FIFO, 1);
 				wait_busy(l1p->hw);
@@ -753,27 +721,16 @@ rx_d_frame(struct hfc4s8s_l1 *l1p, int ech)
 
 		cp = skb->data;
 
-#ifndef HISAX_HFC4S8S_PCIMEM
 		SetRegAddr(l1p->hw, A_FIFO_DATA0);
-#endif
 
 		while (z1 >= 4) {
-#ifdef HISAX_HFC4S8S_PCIMEM
-			*((unsigned long *) cp) =
-				Read_hfc32(l1p->hw, A_FIFO_DATA0);
-#else
 			*((unsigned long *) cp) = fRead_hfc32(l1p->hw);
-#endif
 			cp += 4;
 			z1 -= 4;
 		}
 
 		while (z1--)
-#ifdef HISAX_HFC4S8S_PCIMEM
-			*cp++ = Read_hfc8(l1p->hw, A_FIFO_DATA0);
-#else
-		*cp++ = fRead_hfc8(l1p->hw);
-#endif
+			*cp++ = fRead_hfc8(l1p->hw);
 
 		Write_hfc8(l1p->hw, A_INC_RES_FIFO, 1);	/* increment f counter */
 		wait_busy(l1p->hw);
@@ -859,28 +816,17 @@ rx_b_frame(struct hfc4s8s_btype *bch)
 			wait_busy(l1->hw);
 			return;
 		}
-#ifndef HISAX_HFC4S8S_PCIMEM
 		SetRegAddr(l1->hw, A_FIFO_DATA0);
-#endif
 
 		while (z1 >= 4) {
-#ifdef HISAX_HFC4S8S_PCIMEM
-			*((unsigned long *) bch->rx_ptr) =
-				Read_hfc32(l1->hw, A_FIFO_DATA0);
-#else
 			*((unsigned long *) bch->rx_ptr) =
 				fRead_hfc32(l1->hw);
-#endif
 			bch->rx_ptr += 4;
 			z1 -= 4;
 		}
 
 		while (z1--)
-#ifdef HISAX_HFC4S8S_PCIMEM
-			*(bch->rx_ptr++) = Read_hfc8(l1->hw, A_FIFO_DATA0);
-#else
-		*(bch->rx_ptr++) = fRead_hfc8(l1->hw);
-#endif
+			*(bch->rx_ptr++) = fRead_hfc8(l1->hw);
 
 		if (hdlc_complete) {
 			/* increment f counter */
@@ -940,29 +886,17 @@ tx_d_frame(struct hfc4s8s_l1 *l1p)
 	if ((skb = skb_dequeue(&l1p->d_tx_queue))) {
 		cp = skb->data;
 		cnt = skb->len;
-#ifndef HISAX_HFC4S8S_PCIMEM
 		SetRegAddr(l1p->hw, A_FIFO_DATA0);
-#endif
 
 		while (cnt >= 4) {
-#ifdef HISAX_HFC4S8S_PCIMEM
-			fWrite_hfc32(l1p->hw, A_FIFO_DATA0,
-				     *(unsigned long *) cp);
-#else
 			SetRegAddr(l1p->hw, A_FIFO_DATA0);
 			fWrite_hfc32(l1p->hw, *(unsigned long *) cp);
-#endif
 			cp += 4;
 			cnt -= 4;
 		}
 
-#ifdef HISAX_HFC4S8S_PCIMEM
-		while (cnt--)
-			fWrite_hfc8(l1p->hw, A_FIFO_DATA0, *cp++);
-#else
 		while (cnt--)
 			fWrite_hfc8(l1p->hw, *cp++);
-#endif
 
 		l1p->tx_cnt = skb->truesize;
 		Write_hfc8(l1p->hw, A_INC_RES_FIFO, 1);	/* increment f counter */
@@ -1037,26 +971,15 @@ tx_b_frame(struct hfc4s8s_btype *bch)
 		cp = skb->data + bch->tx_cnt;
 		bch->tx_cnt += cnt;
 
-#ifndef HISAX_HFC4S8S_PCIMEM
 		SetRegAddr(l1->hw, A_FIFO_DATA0);
-#endif
 		while (cnt >= 4) {
-#ifdef HISAX_HFC4S8S_PCIMEM
-			fWrite_hfc32(l1->hw, A_FIFO_DATA0,
-				     *(unsigned long *) cp);
-#else
 			fWrite_hfc32(l1->hw, *(unsigned long *) cp);
-#endif
 			cp += 4;
 			cnt -= 4;
 		}
 
 		while (cnt--)
-#ifdef HISAX_HFC4S8S_PCIMEM
-			fWrite_hfc8(l1->hw, A_FIFO_DATA0, *cp++);
-#else
-		fWrite_hfc8(l1->hw, *cp++);
-#endif
+			fWrite_hfc8(l1->hw, *cp++);
 
 		if (bch->tx_cnt >= skb->len) {
 			if (bch->mode == L1_MODE_HDLC) {
@@ -1281,10 +1204,8 @@ hfc4s8s_interrupt(int intno, void *dev_id)
 	if (!hw || !(hw->mr.r_irq_ctrl & M_GLOB_IRQ_EN))
 		return IRQ_NONE;
 
-#ifndef	HISAX_HFC4S8S_PCIMEM
 	/* read current selected regsister */
 	old_ioreg = GetRegAddr(hw);
-#endif
 
 	/* Layer 1 State change */
 	hw->mr.r_irq_statech |=
@@ -1292,9 +1213,7 @@ hfc4s8s_interrupt(int intno, void *dev_id)
 	if (!
 	    (b = (Read_hfc8(hw, R_STATUS) & (M_MISC_IRQSTA | M_FR_IRQSTA)))
 	    && !hw->mr.r_irq_statech) {
-#ifndef	HISAX_HFC4S8S_PCIMEM
 		SetRegAddr(hw, old_ioreg);
-#endif
 		return IRQ_NONE;
 	}
 
@@ -1322,9 +1241,7 @@ hfc4s8s_interrupt(int intno, void *dev_id)
 	/* queue the request to allow other cards to interrupt */
 	schedule_work(&hw->tqueue);
 
-#ifndef	HISAX_HFC4S8S_PCIMEM
 	SetRegAddr(hw, old_ioreg);
-#endif
 	return IRQ_HANDLED;
 }				/* hfc4s8s_interrupt */
 
@@ -1471,13 +1388,8 @@ static void
 release_pci_ports(hfc4s8s_hw *hw)
 {
 	pci_write_config_word(hw->pdev, PCI_COMMAND, 0);
-#ifdef HISAX_HFC4S8S_PCIMEM
-	if (hw->membase)
-		iounmap((void *) hw->membase);
-#else
 	if (hw->iobase)
 		release_region(hw->iobase, 8);
-#endif
 }
 
 /*****************************************/
@@ -1486,11 +1398,7 @@ release_pci_ports(hfc4s8s_hw *hw)
 static void
 enable_pci_ports(hfc4s8s_hw *hw)
 {
-#ifdef HISAX_HFC4S8S_PCIMEM
-	pci_write_config_word(hw->pdev, PCI_COMMAND, PCI_ENA_MEMIO);
-#else
 	pci_write_config_word(hw->pdev, PCI_COMMAND, PCI_ENA_REGIO);
-#endif
 }
 
 /*************************************/
@@ -1561,15 +1469,9 @@ setup_instance(hfc4s8s_hw *hw)
 		       hw->irq);
 		goto out;
 	}
-#ifdef HISAX_HFC4S8S_PCIMEM
-	printk(KERN_INFO
-	       "HFC-4S/8S: found PCI card at membase 0x%p, irq %d\n",
-	       hw->hw_membase, hw->irq);
-#else
 	printk(KERN_INFO
 	       "HFC-4S/8S: found PCI card at iobase 0x%x, irq %d\n",
 	       hw->iobase, hw->irq);
-#endif
 
 	hfc_hardware_enable(hw, 1, 0);
 
@@ -1614,17 +1516,12 @@ hfc4s8s_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	hw->irq = pdev->irq;
 	hw->iobase = pci_resource_start(pdev, 0);
 
-#ifdef HISAX_HFC4S8S_PCIMEM
-	hw->hw_membase = (u_char *) pci_resource_start(pdev, 1);
-	hw->membase = ioremap((ulong) hw->hw_membase, 256);
-#else
 	if (!request_region(hw->iobase, 8, hw->card_name)) {
 		printk(KERN_INFO
 		       "HFC-4S/8S: failed to request address space at 0x%04x\n",
 		       hw->iobase);
 		goto out;
 	}
-#endif
 
 	pci_set_drvdata(pdev, hw);
 	err = setup_instance(hw);
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index a5da511e3c9a..61ac63237446 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -634,7 +634,7 @@ isdn_ppp_ioctl(int min, struct file *file, unsigned int cmd, unsigned long arg)
 #ifdef CONFIG_IPPP_FILTER
 	case PPPIOCSPASS:
 	{
-		struct sock_fprog fprog;
+		struct sock_fprog_kern fprog;
 		struct sock_filter *code;
 		int err, len = get_filter(argp, &code);
 
@@ -653,7 +653,7 @@ isdn_ppp_ioctl(int min, struct file *file, unsigned int cmd, unsigned long arg)
 	}
 	case PPPIOCSACTIVE:
 	{
-		struct sock_fprog fprog;
+		struct sock_fprog_kern fprog;
 		struct sock_filter *code;
 		int err, len = get_filter(argp, &code);
 
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index 2c0d2c2bf946..9f454d76cc06 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -287,11 +287,9 @@ l1oip_socket_send(struct l1oip *hc, u8 localcodec, u8 channel, u32 chanmask,
 	p = frame;
 
 	/* restart timer */
-	if ((int)(hc->keep_tl.expires-jiffies) < 5 * HZ) {
-		del_timer(&hc->keep_tl);
-		hc->keep_tl.expires = jiffies + L1OIP_KEEPALIVE * HZ;
-		add_timer(&hc->keep_tl);
-	} else
+	if (time_before(hc->keep_tl.expires, jiffies + 5 * HZ))
+		mod_timer(&hc->keep_tl, jiffies + L1OIP_KEEPALIVE * HZ);
+	else
 		hc->keep_tl.expires = jiffies + L1OIP_KEEPALIVE * HZ;
 
 	if (debug & DEBUG_L1OIP_MSG)
@@ -621,11 +619,9 @@ multiframe:
 		goto multiframe;
 
 	/* restart timer */
-	if ((int)(hc->timeout_tl.expires-jiffies) < 5 * HZ || !hc->timeout_on) {
+	if (time_before(hc->timeout_tl.expires, jiffies + 5 * HZ) || !hc->timeout_on) {
 		hc->timeout_on = 1;
-		del_timer(&hc->timeout_tl);
-		hc->timeout_tl.expires = jiffies + L1OIP_TIMEOUT * HZ;
-		add_timer(&hc->timeout_tl);
+		mod_timer(&hc->timeout_tl, jiffies + L1OIP_TIMEOUT * HZ);
 	} else /* only adjust timer */
 		hc->timeout_tl.expires = jiffies + L1OIP_TIMEOUT * HZ;