diff options
| author | Steven Whitehouse <swhiteho@redhat.com> | 2006-10-02 08:45:08 -0400 |
|---|---|---|
| committer | Steven Whitehouse <swhiteho@redhat.com> | 2006-10-02 08:45:08 -0400 |
| commit | 59458f40e25915a355d8b1d701425fe9f4f9ea23 (patch) | |
| tree | f1c9a2934df686e36d75f759ab7313b6f0e0e5f9 /drivers/i2c/busses | |
| parent | 825f9075d74028d11d7f5932f04e1b5db3022b51 (diff) | |
| parent | d834c16516d1ebec4766fc58c059bf01311e6045 (diff) | |
Merge branch 'master' into gfs2
Diffstat (limited to 'drivers/i2c/busses')
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-iop3xx.c | 16 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-ite.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-sibyte.c | 4 |
4 files changed, 13 insertions, 11 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 9e56c3989d68..0d9667921f61 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -196,7 +196,7 @@ config I2C_IBM_IIC config I2C_IOP3XX tristate "Intel IOP3xx and IXP4xx on-chip I2C interface" - depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C + depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX) && I2C help Say Y here if you want to use the IIC bus controller on the Intel IOP3xx I/O Processors or IXP4xx Network Processors. diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 8e413150af37..4436c89be58e 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -82,14 +82,16 @@ iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap) /* * Every time unit enable is asserted, GPOD needs to be cleared - * on IOP321 to avoid data corruption on the bus. + * on IOP3XX to avoid data corruption on the bus. */ -#ifdef CONFIG_ARCH_IOP321 -#define IOP321_GPOD_I2C0 0x00c0 /* clear these bits to enable ch0 */ -#define IOP321_GPOD_I2C1 0x0030 /* clear these bits to enable ch1 */ - - *IOP321_GPOD &= (iop3xx_adap->id == 0) ? ~IOP321_GPOD_I2C0 : - ~IOP321_GPOD_I2C1; +#ifdef CONFIG_PLAT_IOP + if (iop3xx_adap->id == 0) { + gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW); + gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW); + } else { + gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW); + gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW); + } #endif /* NB SR bits not same position as CR IE bits :-( */ iop3xx_adap->SR_enabled = diff --git a/drivers/i2c/busses/i2c-ite.c b/drivers/i2c/busses/i2c-ite.c index d82e6dae8407..559a62b04ee9 100644 --- a/drivers/i2c/busses/i2c-ite.c +++ b/drivers/i2c/busses/i2c-ite.c @@ -109,7 +109,7 @@ static int iic_ite_getclock(void *data) static void iic_ite_waitforpin(void) { DEFINE_WAIT(wait); int timeout = 2; - long flags; + unsigned long flags; /* If interrupts are enabled (which they are), then put the process to * sleep. This process will be awakened by two events -- either the diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c index 8f2b1f0deb81..0ca599d3b402 100644 --- a/drivers/i2c/busses/i2c-sibyte.c +++ b/drivers/i2c/busses/i2c-sibyte.c @@ -210,8 +210,8 @@ static int __init i2c_sibyte_init(void) static void __exit i2c_sibyte_exit(void) { - i2c_del_bus(&sibyte_board_adapter[0]); - i2c_del_bus(&sibyte_board_adapter[1]); + i2c_del_adapter(&sibyte_board_adapter[0]); + i2c_del_adapter(&sibyte_board_adapter[1]); } module_init(i2c_sibyte_init); |