Merge branch 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Highlights:

  Core:
   - Virtual GEM layer merged, this has been around for a long time, and
     it provides a software backed device that allows userspace to use
     it as a GEM shared memory handler.  This makes it a lot easier to
     do certain things when you have no GPU but still have to deal with
     DRI expectations.
   - atomic helper updates.
   - framebuffer modifier interface added.
   - i2c over auxch displayport fixes.
   - fb width/height confusion fixes.
   - new driver for ps8622/ps8625 bridge chips
   - lots of new panels

  i915:
   - more plane atomic conversion
   - vGPU guest support for XenGT
   - Skylake workarounds and fixes
   - Y-tiling support
   - work on dynamic pagetable allocation
   - EU count report param for gen9+
   - CHV fixes (no longer prelim)
   - remove ilk rc6
   - frontbuffer tracking for fbc
   - Displayport link rate refactoring
   - sprite colorkey refactor

  radeon:
   - Displayport MST support (not enabled by default)
   - non-ATOM native hw auxch support (DCE5+)
   - output csc support
   - new queries for userspace debug support
   - new VCE packet

  nouveau:
   - gk20a iommu support
   - gm107 graphics support
   - more gm20x bringup (waiting on signed nvidia fw).

  amdkfd:
   - multiple kgd instance support
   - use 64-bit time accessors

  msm:
   - stolen memory support
   - DSI and dual-DSI support
   - snapdragon 410 support

  exynos:
   - cleanups for atomic and pageflip

  imx-drm:
   - more media-bus formats
   - TV output prep
   - drm panel support

  tegra:
   - hw vblank counter using host1x syncpoints

  omap:
   - universal plane support
   - prep work for atomic modesetting

  rcar-du:
   - ported to atomic modesetting

  atmel-hlcdc:
   - ported to atomic modesetting
   - added suspend/resume support

  sti:
   - ported to atomic modesetting

  dwhdmi:
   - more compliant audio support
   - update rockchip phy support

  tda998x:
   - DT probing for attached crtcs
   - simplified EDID reading

  rockchip:
   - fixes

  adv7511:
   - fixes"

* 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux: (689 commits)
  media-bus: Fixup RGB444_1X12, RGB565_1X16, and YUV8_1X24 media bus format
  drm/i915: Dont enable CS_PARSER_ERROR interrupts at all
  drm/i915: Move drm_framebuffer_unreference out of struct_mutex for takeover
  drm: fix trivial typo mistake
  drm: Make integer overflow checking cover universal cursor updates (v2)
  drm/nouveau/bios: fix fetching from acpi on certain systems
  drm/nouveau/gr/gm206: initial init+ctx code
  drm/nouveau/ce/gm206: enable support via gm204 code
  drm/nouveau/fifo/gm206: enable support via gm204 code
  drm/nouveau/gr/gm204: initial init+ctx code
  drm/nouveau: support for buffer moves via MaxwellDmaCopyA
  drm/nouveau/ce/gm204: initial support
  drm/nouveau: add support for gm20x fifo channels
  drm/nouveau/fifo/gm204: initial support
  drm/nouveau/gr/gk104-: prevent reading non-existent regs in intr handler
  drm/nouveau/gr/gm107: very slightly demagic part of attrib cb setup
  drm/nouveau/gr/gk104-: correct crop/zrop num_active_fbps setting
  drm/nouveau/gr/gf100-: add symbolic names for classes
  drm/nouveau/gr/gm107: support tpc "strand" ctxsw in gpccs ucode
  drm/nouveau/gr/gf100-: support mmio access with gpc offset from gpccs ucode
  ...

2 files changed, 133 insertions, 165 deletions

diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
index fa140e04d5fa..b728523e194f 100644
--- a/drivers/gpu/drm/i2c/adv7511.c
+++ b/drivers/gpu/drm/i2c/adv7511.c
@@ -27,12 +27,13 @@ struct adv7511 {
 	struct regmap *regmap;
 	struct regmap *packet_memory_regmap;
 	enum drm_connector_status status;
-	int dpms_mode;
+	bool powered;
 
 	unsigned int f_tmds;
 
 	unsigned int current_edid_segment;
 	uint8_t edid_buf[256];
+	bool edid_read;
 
 	wait_queue_head_t wq;
 	struct drm_encoder *encoder;
@@ -357,6 +358,48 @@ static void adv7511_set_link_config(struct adv7511 *adv7511,
 	adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
 }
 
+static void adv7511_power_on(struct adv7511 *adv7511)
+{
+	adv7511->current_edid_segment = -1;
+
+	regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+		     ADV7511_INT0_EDID_READY);
+	regmap_write(adv7511->regmap, ADV7511_REG_INT(1),
+		     ADV7511_INT1_DDC_ERROR);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+			   ADV7511_POWER_POWER_DOWN, 0);
+
+	/*
+	 * Per spec it is allowed to pulse the HDP signal to indicate that the
+	 * EDID information has changed. Some monitors do this when they wakeup
+	 * from standby or are enabled. When the HDP goes low the adv7511 is
+	 * reset and the outputs are disabled which might cause the monitor to
+	 * go to standby again. To avoid this we ignore the HDP pin for the
+	 * first few seconds after enabling the output.
+	 */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+			   ADV7511_REG_POWER2_HDP_SRC_MASK,
+			   ADV7511_REG_POWER2_HDP_SRC_NONE);
+
+	/*
+	 * Most of the registers are reset during power down or when HPD is low.
+	 */
+	regcache_sync(adv7511->regmap);
+
+	adv7511->powered = true;
+}
+
+static void adv7511_power_off(struct adv7511 *adv7511)
+{
+	/* TODO: setup additional power down modes */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+			   ADV7511_POWER_POWER_DOWN,
+			   ADV7511_POWER_POWER_DOWN);
+	regcache_mark_dirty(adv7511->regmap);
+
+	adv7511->powered = false;
+}
+
 /* -----------------------------------------------------------------------------
  * Interrupt and hotplug detection
  */
@@ -379,69 +422,71 @@ static bool adv7511_hpd(struct adv7511 *adv7511)
 	return false;
 }
 
-static irqreturn_t adv7511_irq_handler(int irq, void *devid)
-{
-	struct adv7511 *adv7511 = devid;
-
-	if (adv7511_hpd(adv7511))
-		drm_helper_hpd_irq_event(adv7511->encoder->dev);
-
-	wake_up_all(&adv7511->wq);
-
-	return IRQ_HANDLED;
-}
-
-static unsigned int adv7511_is_interrupt_pending(struct adv7511 *adv7511,
-						 unsigned int irq)
+static int adv7511_irq_process(struct adv7511 *adv7511)
 {
 	unsigned int irq0, irq1;
-	unsigned int pending;
 	int ret;
 
 	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
 	if (ret < 0)
-		return 0;
+		return ret;
+
 	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(1), &irq1);
 	if (ret < 0)
-		return 0;
+		return ret;
 
-	pending = (irq1 << 8) | irq0;
+	regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
+	regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
 
-	return pending & irq;
+	if (irq0 & ADV7511_INT0_HDP)
+		drm_helper_hpd_irq_event(adv7511->encoder->dev);
+
+	if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
+		adv7511->edid_read = true;
+
+		if (adv7511->i2c_main->irq)
+			wake_up_all(&adv7511->wq);
+	}
+
+	return 0;
 }
 
-static int adv7511_wait_for_interrupt(struct adv7511 *adv7511, int irq,
-				      int timeout)
+static irqreturn_t adv7511_irq_handler(int irq, void *devid)
+{
+	struct adv7511 *adv7511 = devid;
+	int ret;
+
+	ret = adv7511_irq_process(adv7511);
+	return ret < 0 ? IRQ_NONE : IRQ_HANDLED;
+}
+
+/* -----------------------------------------------------------------------------
+ * EDID retrieval
+ */
+
+static int adv7511_wait_for_edid(struct adv7511 *adv7511, int timeout)
 {
-	unsigned int pending;
 	int ret;
 
 	if (adv7511->i2c_main->irq) {
 		ret = wait_event_interruptible_timeout(adv7511->wq,
-				adv7511_is_interrupt_pending(adv7511, irq),
-				msecs_to_jiffies(timeout));
-		if (ret <= 0)
-			return 0;
-		pending = adv7511_is_interrupt_pending(adv7511, irq);
+				adv7511->edid_read, msecs_to_jiffies(timeout));
 	} else {
-		if (timeout < 25)
-			timeout = 25;
-		do {
-			pending = adv7511_is_interrupt_pending(adv7511, irq);
-			if (pending)
+		for (; timeout > 0; timeout -= 25) {
+			ret = adv7511_irq_process(adv7511);
+			if (ret < 0)
 				break;
+
+			if (adv7511->edid_read)
+				break;
+
 			msleep(25);
-			timeout -= 25;
-		} while (timeout >= 25);
+		}
 	}
 
-	return pending;
+	return adv7511->edid_read ? 0 : -EIO;
 }
 
-/* -----------------------------------------------------------------------------
- * EDID retrieval
- */
-
 static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
 				  size_t len)
 {
@@ -463,19 +508,14 @@ static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
 			return ret;
 
 		if (status != 2) {
+			adv7511->edid_read = false;
 			regmap_write(adv7511->regmap, ADV7511_REG_EDID_SEGMENT,
 				     block);
-			ret = adv7511_wait_for_interrupt(adv7511,
-					ADV7511_INT0_EDID_READY |
-					ADV7511_INT1_DDC_ERROR, 200);
-
-			if (!(ret & ADV7511_INT0_EDID_READY))
-				return -EIO;
+			ret = adv7511_wait_for_edid(adv7511, 200);
+			if (ret < 0)
+				return ret;
 		}
 
-		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
-			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
-
 		/* Break this apart, hopefully more I2C controllers will
 		 * support 64 byte transfers than 256 byte transfers
 		 */
@@ -526,9 +566,11 @@ static int adv7511_get_modes(struct drm_encoder *encoder,
 	unsigned int count;
 
 	/* Reading the EDID only works if the device is powered */
-	if (adv7511->dpms_mode != DRM_MODE_DPMS_ON) {
+	if (!adv7511->powered) {
 		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
-			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
+			     ADV7511_INT0_EDID_READY);
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(1),
+			     ADV7511_INT1_DDC_ERROR);
 		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
 				   ADV7511_POWER_POWER_DOWN, 0);
 		adv7511->current_edid_segment = -1;
@@ -536,7 +578,7 @@ static int adv7511_get_modes(struct drm_encoder *encoder,
 
 	edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
 
-	if (adv7511->dpms_mode != DRM_MODE_DPMS_ON)
+	if (!adv7511->powered)
 		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
 				   ADV7511_POWER_POWER_DOWN,
 				   ADV7511_POWER_POWER_DOWN);
@@ -558,41 +600,10 @@ static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
 
-	switch (mode) {
-	case DRM_MODE_DPMS_ON:
-		adv7511->current_edid_segment = -1;
-
-		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
-			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
-				   ADV7511_POWER_POWER_DOWN, 0);
-		/*
-		 * Per spec it is allowed to pulse the HDP signal to indicate
-		 * that the EDID information has changed. Some monitors do this
-		 * when they wakeup from standby or are enabled. When the HDP
-		 * goes low the adv7511 is reset and the outputs are disabled
-		 * which might cause the monitor to go to standby again. To
-		 * avoid this we ignore the HDP pin for the first few seconds
-		 * after enabeling the output.
-		 */
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
-				   ADV7511_REG_POWER2_HDP_SRC_MASK,
-				   ADV7511_REG_POWER2_HDP_SRC_NONE);
-		/* Most of the registers are reset during power down or
-		 * when HPD is low
-		 */
-		regcache_sync(adv7511->regmap);
-		break;
-	default:
-		/* TODO: setup additional power down modes */
-		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
-				   ADV7511_POWER_POWER_DOWN,
-				   ADV7511_POWER_POWER_DOWN);
-		regcache_mark_dirty(adv7511->regmap);
-		break;
-	}
-
-	adv7511->dpms_mode = mode;
+	if (mode == DRM_MODE_DPMS_ON)
+		adv7511_power_on(adv7511);
+	else
+		adv7511_power_off(adv7511);
 }
 
 static enum drm_connector_status
@@ -620,10 +631,9 @@ adv7511_encoder_detect(struct drm_encoder *encoder,
 	 * there is a pending HPD interrupt and the cable is connected there was
 	 * at least one transition from disconnected to connected and the chip
 	 * has to be reinitialized. */
-	if (status == connector_status_connected && hpd &&
-	    adv7511->dpms_mode == DRM_MODE_DPMS_ON) {
+	if (status == connector_status_connected && hpd && adv7511->powered) {
 		regcache_mark_dirty(adv7511->regmap);
-		adv7511_encoder_dpms(encoder, adv7511->dpms_mode);
+		adv7511_power_on(adv7511);
 		adv7511_get_modes(encoder, connector);
 		if (adv7511->status == connector_status_connected)
 			status = connector_status_disconnected;
@@ -858,7 +868,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	if (!adv7511)
 		return -ENOMEM;
 
-	adv7511->dpms_mode = DRM_MODE_DPMS_OFF;
+	adv7511->powered = false;
 	adv7511->status = connector_status_disconnected;
 
 	ret = adv7511_parse_dt(dev->of_node, &link_config);
@@ -918,10 +928,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
 		     ADV7511_CEC_CTRL_POWER_DOWN);
 
-	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
-			   ADV7511_POWER_POWER_DOWN, ADV7511_POWER_POWER_DOWN);
-
-	adv7511->current_edid_segment = -1;
+	adv7511_power_off(adv7511);
 
 	i2c_set_clientdata(i2c, adv7511);
 
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index a9041d1a8ff0..5febffdb027d 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -25,6 +25,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_encoder_slave.h>
 #include <drm/drm_edid.h>
+#include <drm/drm_of.h>
 #include <drm/i2c/tda998x.h>
 
 #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
@@ -387,7 +388,7 @@ set_page(struct tda998x_priv *priv, uint16_t reg)
 		};
 		int ret = i2c_master_send(client, buf, sizeof(buf));
 		if (ret < 0) {
-			dev_err(&client->dev, "setpage %04x err %d\n",
+			dev_err(&client->dev, "%s %04x err %d\n", __func__,
 					reg, ret);
 			return ret;
 		}
@@ -1035,8 +1036,9 @@ tda998x_encoder_detect(struct tda998x_priv *priv)
 			connector_status_disconnected;
 }
 
-static int read_edid_block(struct tda998x_priv *priv, uint8_t *buf, int blk)
+static int read_edid_block(void *data, u8 *buf, unsigned int blk, size_t length)
 {
+	struct tda998x_priv *priv = data;
 	uint8_t offset, segptr;
 	int ret, i;
 
@@ -1080,8 +1082,8 @@ static int read_edid_block(struct tda998x_priv *priv, uint8_t *buf, int blk)
 		return -ETIMEDOUT;
 	}
 
-	ret = reg_read_range(priv, REG_EDID_DATA_0, buf, EDID_LENGTH);
-	if (ret != EDID_LENGTH) {
+	ret = reg_read_range(priv, REG_EDID_DATA_0, buf, length);
+	if (ret != length) {
 		dev_err(&priv->hdmi->dev, "failed to read edid block %d: %d\n",
 			blk, ret);
 		return ret;
@@ -1090,82 +1092,31 @@ static int read_edid_block(struct tda998x_priv *priv, uint8_t *buf, int blk)
 	return 0;
 }
 
-static uint8_t *do_get_edid(struct tda998x_priv *priv)
+static int
+tda998x_encoder_get_modes(struct tda998x_priv *priv,
+			  struct drm_connector *connector)
 {
-	int j, valid_extensions = 0;
-	uint8_t *block, *new;
-	bool print_bad_edid = drm_debug & DRM_UT_KMS;
-
-	if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
-		return NULL;
+	struct edid *edid;
+	int n;
 
 	if (priv->rev == TDA19988)
 		reg_clear(priv, REG_TX4, TX4_PD_RAM);
 
-	/* base block fetch */
-	if (read_edid_block(priv, block, 0))
-		goto fail;
-
-	if (!drm_edid_block_valid(block, 0, print_bad_edid))
-		goto fail;
-
-	/* if there's no extensions, we're done */
-	if (block[0x7e] == 0)
-		goto done;
-
-	new = krealloc(block, (block[0x7e] + 1) * EDID_LENGTH, GFP_KERNEL);
-	if (!new)
-		goto fail;
-	block = new;
-
-	for (j = 1; j <= block[0x7e]; j++) {
-		uint8_t *ext_block = block + (valid_extensions + 1) * EDID_LENGTH;
-		if (read_edid_block(priv, ext_block, j))
-			goto fail;
-
-		if (!drm_edid_block_valid(ext_block, j, print_bad_edid))
-			goto fail;
-
-		valid_extensions++;
-	}
-
-	if (valid_extensions != block[0x7e]) {
-		block[EDID_LENGTH-1] += block[0x7e] - valid_extensions;
-		block[0x7e] = valid_extensions;
-		new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL);
-		if (!new)
-			goto fail;
-		block = new;
-	}
+	edid = drm_do_get_edid(connector, read_edid_block, priv);
 
-done:
 	if (priv->rev == TDA19988)
 		reg_set(priv, REG_TX4, TX4_PD_RAM);
 
-	return block;
-
-fail:
-	if (priv->rev == TDA19988)
-		reg_set(priv, REG_TX4, TX4_PD_RAM);
-	dev_warn(&priv->hdmi->dev, "failed to read EDID\n");
-	kfree(block);
-	return NULL;
-}
-
-static int
-tda998x_encoder_get_modes(struct tda998x_priv *priv,
-			  struct drm_connector *connector)
-{
-	struct edid *edid = (struct edid *)do_get_edid(priv);
-	int n = 0;
-
-	if (edid) {
-		drm_mode_connector_update_edid_property(connector, edid);
-		n = drm_add_edid_modes(connector, edid);
-		priv->is_hdmi_sink = drm_detect_hdmi_monitor(edid);
-		kfree(edid);
+	if (!edid) {
+		dev_warn(&priv->hdmi->dev, "failed to read EDID\n");
+		return 0;
 	}
 
+	drm_mode_connector_update_edid_property(connector, edid);
+	n = drm_add_edid_modes(connector, edid);
+	priv->is_hdmi_sink = drm_detect_hdmi_monitor(edid);
+	kfree(edid);
+
 	return n;
 }
 
@@ -1547,6 +1498,7 @@ static int tda998x_bind(struct device *dev, struct device *master, void *data)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct drm_device *drm = data;
 	struct tda998x_priv2 *priv;
+	uint32_t crtcs = 0;
 	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -1555,9 +1507,18 @@ static int tda998x_bind(struct device *dev, struct device *master, void *data)
 
 	dev_set_drvdata(dev, priv);
 
+	if (dev->of_node)
+		crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+
+	/* If no CRTCs were found, fall back to our old behaviour */
+	if (crtcs == 0) {
+		dev_warn(dev, "Falling back to first CRTC\n");
+		crtcs = 1 << 0;
+	}
+
 	priv->base.encoder = &priv->encoder;
 	priv->connector.interlace_allowed = 1;
-	priv->encoder.possible_crtcs = 1 << 0;
+	priv->encoder.possible_crtcs = crtcs;
 
 	ret = tda998x_create(client, &priv->base);
 	if (ret)