Update the i.MX31 Kernel to 2.6.232.6.23-mx31ads-2008022618072.6.23-mx31-200802261807

This is the result of a brute-force attempt to update the kernel to 2.6.23.
Now that we have a git tree, our effort will be a little nicer in the future.

Signed-off-by: Justin Waters <justin.waters@timesys.com>

1 files changed, 74 insertions, 0 deletions

diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index 91a803ea88be..b92d6d2d5b04 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -38,11 +38,85 @@
 #include <asm/sbus.h>
 #include <asm/cacheflush.h>
 
+#include "irq.h"
+
+/* On the sun4m, just like the timers, we have both per-cpu and master
+ * interrupt registers.
+ */
+
+/* These registers are used for sending/receiving irqs from/to
+ * different cpu's.
+ */
+struct sun4m_intreg_percpu {
+	unsigned int tbt;        /* Interrupts still pending for this cpu. */
+
+	/* These next two registers are WRITE-ONLY and are only
+	 * "on bit" sensitive, "off bits" written have NO affect.
+	 */
+	unsigned int clear;  /* Clear this cpus irqs here. */
+	unsigned int set;    /* Set this cpus irqs here. */
+	unsigned char space[PAGE_SIZE - 12];
+};
+
+/*
+ * djhr
+ * Actually the clear and set fields in this struct are misleading..
+ * according to the SLAVIO manual (and the same applies for the SEC)
+ * the clear field clears bits in the mask which will ENABLE that IRQ
+ * the set field sets bits in the mask to DISABLE the IRQ.
+ *
+ * Also the undirected_xx address in the SLAVIO is defined as
+ * RESERVED and write only..
+ *
+ * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor
+ *             sun4m machines, for MP the layout makes more sense.
+ */
+struct sun4m_intregs {
+	struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS];
+	unsigned int tbt;                /* IRQ's that are still pending. */
+	unsigned int irqs;               /* Master IRQ bits. */
+
+	/* Again, like the above, two these registers are WRITE-ONLY. */
+	unsigned int clear;              /* Clear master IRQ's by setting bits here. */
+	unsigned int set;                /* Set master IRQ's by setting bits here. */
+
+	/* This register is both READ and WRITE. */
+	unsigned int undirected_target;  /* Which cpu gets undirected irqs. */
+};
+
 static unsigned long dummy;
 
 struct sun4m_intregs *sun4m_interrupts;
 unsigned long *irq_rcvreg = &dummy;
 
+/* Dave Redman (djhr@tadpole.co.uk)
+ * The sun4m interrupt registers.
+ */
+#define SUN4M_INT_ENABLE  	0x80000000
+#define SUN4M_INT_E14     	0x00000080
+#define SUN4M_INT_E10     	0x00080000
+
+#define SUN4M_HARD_INT(x)	(0x000000001 << (x))
+#define SUN4M_SOFT_INT(x)	(0x000010000 << (x))
+
+#define	SUN4M_INT_MASKALL	0x80000000	  /* mask all interrupts */
+#define	SUN4M_INT_MODULE_ERR	0x40000000	  /* module error */
+#define	SUN4M_INT_M2S_WRITE	0x20000000	  /* write buffer error */
+#define	SUN4M_INT_ECC		0x10000000	  /* ecc memory error */
+#define	SUN4M_INT_FLOPPY	0x00400000	  /* floppy disk */
+#define	SUN4M_INT_MODULE	0x00200000	  /* module interrupt */
+#define	SUN4M_INT_VIDEO		0x00100000	  /* onboard video */
+#define	SUN4M_INT_REALTIME	0x00080000	  /* system timer */
+#define	SUN4M_INT_SCSI		0x00040000	  /* onboard scsi */
+#define	SUN4M_INT_AUDIO		0x00020000	  /* audio/isdn */
+#define	SUN4M_INT_ETHERNET	0x00010000	  /* onboard ethernet */
+#define	SUN4M_INT_SERIAL	0x00008000	  /* serial ports */
+#define	SUN4M_INT_KBDMS		0x00004000	  /* keyboard/mouse */
+#define	SUN4M_INT_SBUSBITS	0x00003F80	  /* sbus int bits */
+
+#define SUN4M_INT_SBUS(x)	(1 << (x+7))
+#define SUN4M_INT_VME(x)	(1 << (x))
+
 /* These tables only apply for interrupts greater than 15..
  * 
  * any intr value below 0x10 is considered to be a soft-int