Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits)
  [POWERPC] Add memchr() to the bootwrapper
  [POWERPC] Implement logging of unhandled signals
  [POWERPC] Add legacy serial support for OPB with flattened device tree
  [POWERPC] Use 1TB segments
  [POWERPC] XilinxFB: Allow fixed framebuffer base address
  [POWERPC] XilinxFB: Add support for custom screen resolution
  [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters
  [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci
  [POWERPC] 4xx: Kilauea defconfig file
  [POWERPC] 4xx: Kilauea DTS
  [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x
  [POWERPC] 4xx: Add AMCC 405EX support to cputable.c
  [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable
  [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers
  [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig
  [POWERPC] 85xx: Killed <asm/mpc85xx.h>
  [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS
  [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.
  [POWERPC] mpc8272ads: Remove muram from the CPM reg property.
  [POWERPC] Make clockevents work on PPC601 processors
  ...

Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.

4 files changed, 96 insertions, 19 deletions

diff --git a/arch/powerpc/platforms/chrp/gg2.h b/arch/powerpc/platforms/chrp/gg2.h
new file mode 100644
index 000000000000..341ae55b99fb
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/gg2.h
@@ -0,0 +1,61 @@
+/*
+ *  include/asm-ppc/gg2.h -- VLSI VAS96011/12 `Golden Gate 2' register definitions
+ *
+ *  Copyright (C) 1997 Geert Uytterhoeven
+ *
+ *  This file is based on the following documentation:
+ *
+ *	The VAS96011/12 Chipset, Data Book, Edition 1.0
+ *	VLSI Technology, Inc.
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#ifndef _ASMPPC_GG2_H
+#define _ASMPPC_GG2_H
+
+    /*
+     *  Memory Map (CHRP mode)
+     */
+
+#define GG2_PCI_MEM_BASE	0xc0000000	/* Peripheral memory space */
+#define GG2_ISA_MEM_BASE	0xf7000000	/* Peripheral memory alias */
+#define GG2_ISA_IO_BASE		0xf8000000	/* Peripheral I/O space */
+#define GG2_PCI_CONFIG_BASE	0xfec00000	/* PCI configuration space */
+#define GG2_INT_ACK_SPECIAL	0xfec80000	/* Interrupt acknowledge and */
+						/* special PCI cycles */
+#define GG2_ROM_BASE0		0xff000000	/* ROM bank 0 */
+#define GG2_ROM_BASE1		0xff800000	/* ROM bank 1 */
+
+
+    /*
+     *  GG2 specific PCI Registers
+     */
+
+extern void __iomem *gg2_pci_config_base;	/* kernel virtual address */
+
+#define GG2_PCI_BUSNO		0x40	/* Bus number */
+#define GG2_PCI_SUBBUSNO	0x41	/* Subordinate bus number */
+#define GG2_PCI_DISCCTR		0x42	/* Disconnect counter */
+#define GG2_PCI_PPC_CTRL	0x50	/* PowerPC interface control register */
+#define GG2_PCI_ADDR_MAP	0x5c	/* Address map */
+#define GG2_PCI_PCI_CTRL	0x60	/* PCI interface control register */
+#define GG2_PCI_ROM_CTRL	0x70	/* ROM interface control register */
+#define GG2_PCI_ROM_TIME	0x74	/* ROM timing */
+#define GG2_PCI_CC_CTRL		0x80	/* Cache controller control register */
+#define GG2_PCI_DRAM_BANK0	0x90	/* Control register for DRAM bank #0 */
+#define GG2_PCI_DRAM_BANK1	0x94	/* Control register for DRAM bank #1 */
+#define GG2_PCI_DRAM_BANK2	0x98	/* Control register for DRAM bank #2 */
+#define GG2_PCI_DRAM_BANK3	0x9c	/* Control register for DRAM bank #3 */
+#define GG2_PCI_DRAM_BANK4	0xa0	/* Control register for DRAM bank #4 */
+#define GG2_PCI_DRAM_BANK5	0xa4	/* Control register for DRAM bank #5 */
+#define GG2_PCI_DRAM_TIME0	0xb0	/* Timing parameters set #0 */
+#define GG2_PCI_DRAM_TIME1	0xb4	/* Timing parameters set #1 */
+#define GG2_PCI_DRAM_CTRL	0xc0	/* DRAM control */
+#define GG2_PCI_ERR_CTRL	0xd0	/* Error control register */
+#define GG2_PCI_ERR_STATUS	0xd4	/* Error status register */
+					/* Cleared when read */
+
+#endif /* _ASMPPC_GG2_H */
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 28d1647b204e..e43465d34d29 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -13,7 +13,6 @@
 #include <asm/irq.h>
 #include <asm/hydra.h>
 #include <asm/prom.h>
-#include <asm/gg2.h>
 #include <asm/machdep.h>
 #include <asm/sections.h>
 #include <asm/pci-bridge.h>
@@ -21,6 +20,7 @@
 #include <asm/rtas.h>
 
 #include "chrp.h"
+#include "gg2.h"
 
 /* LongTrail */
 void __iomem *gg2_pci_config_base;
@@ -86,8 +86,8 @@ int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
 
 static struct pci_ops gg2_pci_ops =
 {
-	gg2_read_config,
-	gg2_write_config
+	.read = gg2_read_config,
+	.write = gg2_write_config,
 };
 
 /*
@@ -124,8 +124,8 @@ int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 
 static struct pci_ops rtas_pci_ops =
 {
-	rtas_read_config,
-	rtas_write_config
+	.read = rtas_read_config,
+	.write = rtas_write_config,
 };
 
 volatile struct Hydra __iomem *Hydra = NULL;
@@ -338,3 +338,32 @@ void chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105)
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
 		chrp_pci_fixup_winbond_ata);
+
+/* Pegasos2 firmware version 20040810 configures the built-in IDE controller
+ * in legacy mode, but sets the PCI registers to PCI native mode.
+ * The chip can only operate in legacy mode, so force the PCI class into legacy
+ * mode as well. The same fixup must be done to the class-code property in
+ * the IDE node /pci@80000000/ide@C,1
+ */
+static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
+{
+	u8 progif;
+	struct pci_dev *viaisa;
+
+	if (!machine_is(chrp) || _chrp_type != _CHRP_Pegasos)
+		return;
+	if (viaide->irq != 14)
+		return;
+
+	viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
+	if (!viaisa)
+		return;
+	printk("Fixing VIA IDE, force legacy mode on '%s'\n", viaide->dev.bus_id);
+
+	pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
+	pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);
+	viaide->class &= ~0x5;
+
+	pci_dev_put(viaisa);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata);
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 373de4c063db..59306261f5b2 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -32,13 +32,11 @@
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/initrd.h>
-#include <linux/module.h>
 #include <linux/timer.h>
 
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/prom.h>
-#include <asm/gg2.h>
 #include <asm/pci-bridge.h>
 #include <asm/dma.h>
 #include <asm/machdep.h>
@@ -52,6 +50,7 @@
 #include <asm/xmon.h>
 
 #include "chrp.h"
+#include "gg2.h"
 
 void rtas_indicator_progress(char *, unsigned short);
 
@@ -291,16 +290,6 @@ void __init chrp_setup_arch(void)
 		ppc_md.set_rtc_time	= rtas_set_rtc_time;
 	}
 
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* this is fine for chrp */
-	initrd_below_start_ok = 1;
-
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-		ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
-
 	/* On pegasos, enable the L2 cache if not already done by OF */
 	pegasos_set_l2cr();
 
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index 3ea0eb78568e..10a4a4d063b6 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -26,10 +26,8 @@
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/smp.h>
-#include <asm/residual.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
-#include <asm/smp.h>
 #include <asm/mpic.h>
 #include <asm/rtas.h>