Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300

* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits)
  MN10300: Save frame pointer in thread_info struct rather than global var
  MN10300: Change "Matsushita" to "Panasonic".
  MN10300: Create a defconfig for the ASB2364 board
  MN10300: Update the ASB2303 defconfig
  MN10300: ASB2364: Add support for SMSC911X and SMC911X
  MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA
  MN10300: Generic time support
  MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support
  MN10300: Map userspace atomic op regs as a vmalloc page
  MN10300: And Panasonic AM34 subarch and implement SMP
  MN10300: Delete idle_timestamp from irq_cpustat_t
  MN10300: Make various interrupt priority settings configurable
  MN10300: Optimise do_csum()
  MN10300: Implement atomic ops using atomic ops unit
  MN10300: Make the FPU operate in non-lazy mode under SMP
  MN10300: SMP TLB flushing
  MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control
  MN10300: Make the use of PIDR to mark TLB entries controllable
  MN10300: Rename __flush_tlb*() to local_flush_tlb*()
  MN10300: AM34 erratum requires MMUCTR read and write on exception entry
  ...

1 files changed, 0 insertions, 192 deletions

diff --git a/arch/mn10300/mm/cache-flush-mn10300.S b/arch/mn10300/mm/cache-flush-mn10300.S
deleted file mode 100644
index c8ed1cbac107..000000000000
--- a/arch/mn10300/mm/cache-flush-mn10300.S
+++ /dev/null
@@ -1,192 +0,0 @@
-/* MN10300 CPU core caching routines
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <asm/smp.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-
-	.am33_2
-	.globl mn10300_dcache_flush
-	.globl mn10300_dcache_flush_page
-	.globl mn10300_dcache_flush_range
-	.globl mn10300_dcache_flush_range2
-	.globl mn10300_dcache_flush_inv
-	.globl mn10300_dcache_flush_inv_page
-	.globl mn10300_dcache_flush_inv_range
-	.globl mn10300_dcache_flush_inv_range2
-
-###############################################################################
-#
-# void mn10300_dcache_flush(void)
-# Flush the entire data cache back to RAM
-#
-###############################################################################
-	ALIGN
-mn10300_dcache_flush:
-	movhu	(CHCTR),d0
-	btst	CHCTR_DCEN,d0
-	beq	mn10300_dcache_flush_end
-
-	# read the addresses tagged in the cache's tag RAM and attempt to flush
-	# those addresses specifically
-	# - we rely on the hardware to filter out invalid tag entry addresses
-	mov	DCACHE_TAG(0,0),a0		# dcache tag RAM access address
-	mov	DCACHE_PURGE(0,0),a1		# dcache purge request address
-	mov	L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1  # total number of entries
-
-mn10300_dcache_flush_loop:
-	mov	(a0),d0
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
-	or	L1_CACHE_TAG_VALID,d0		# retain valid entries in the
-						# cache
-	mov	d0,(a1)				# conditional purge
-
-mn10300_dcache_flush_skip:
-	add	L1_CACHE_BYTES,a0
-	add	L1_CACHE_BYTES,a1
-	add	-1,d1
-	bne	mn10300_dcache_flush_loop
-
-mn10300_dcache_flush_end:
-	ret	[],0
-
-###############################################################################
-#
-# void mn10300_dcache_flush_page(unsigned start)
-# void mn10300_dcache_flush_range(unsigned start, unsigned end)
-# void mn10300_dcache_flush_range2(unsigned start, unsigned size)
-# Flush a range of addresses on a page in the dcache
-#
-###############################################################################
-	ALIGN
-mn10300_dcache_flush_page:
-	mov	PAGE_SIZE,d1
-mn10300_dcache_flush_range2:
-	add	d0,d1
-mn10300_dcache_flush_range:
-	movm	[d2,d3],(sp)
-
-	movhu	(CHCTR),d2
-	btst	CHCTR_DCEN,d2
-	beq	mn10300_dcache_flush_range_end
-
-	# round start addr down
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
-	mov	d0,a1
-
-	add	L1_CACHE_BYTES,d1			# round end addr up
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
-
-	# write a request to flush all instances of an address from the cache
-	mov	DCACHE_PURGE(0,0),a0
-	mov	a1,d0
-	and	L1_CACHE_TAG_ENTRY,d0
-	add	d0,a0				# starting dcache purge control
-						# reg address
-
-	sub	a1,d1
-	lsr	L1_CACHE_SHIFT,d1		# total number of entries to
-						# examine
-
-	or	L1_CACHE_TAG_VALID,a1		# retain valid entries in the
-						# cache
-
-mn10300_dcache_flush_range_loop:
-	mov	a1,(L1_CACHE_WAYDISP*0,a0)	# conditionally purge this line
-						# all ways
-
-	add	L1_CACHE_BYTES,a0
-	add	L1_CACHE_BYTES,a1
-	and	~L1_CACHE_WAYDISP,a0		# make sure way stay on way 0
-	add	-1,d1
-	bne	mn10300_dcache_flush_range_loop
-
-mn10300_dcache_flush_range_end:
-	ret	[d2,d3],8
-
-###############################################################################
-#
-# void mn10300_dcache_flush_inv(void)
-# Flush the entire data cache and invalidate all entries
-#
-###############################################################################
-	ALIGN
-mn10300_dcache_flush_inv:
-	movhu	(CHCTR),d0
-	btst	CHCTR_DCEN,d0
-	beq	mn10300_dcache_flush_inv_end
-
-	# hit each line in the dcache with an unconditional purge
-	mov	DCACHE_PURGE(0,0),a1		# dcache purge request address
-	mov	L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1  # total number of entries
-
-mn10300_dcache_flush_inv_loop:
-	mov	(a1),d0				# unconditional purge
-
-	add	L1_CACHE_BYTES,a1
-	add	-1,d1
-	bne	mn10300_dcache_flush_inv_loop
-
-mn10300_dcache_flush_inv_end:
-	ret	[],0
-
-###############################################################################
-#
-# void mn10300_dcache_flush_inv_page(unsigned start)
-# void mn10300_dcache_flush_inv_range(unsigned start, unsigned end)
-# void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size)
-# Flush and invalidate a range of addresses on a page in the dcache
-#
-###############################################################################
-	ALIGN
-mn10300_dcache_flush_inv_page:
-	mov	PAGE_SIZE,d1
-mn10300_dcache_flush_inv_range2:
-	add	d0,d1
-mn10300_dcache_flush_inv_range:
-	movm	[d2,d3],(sp)
-	movhu	(CHCTR),d2
-	btst	CHCTR_DCEN,d2
-	beq	mn10300_dcache_flush_inv_range_end
-
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0	# round start
-								# addr down
-	mov	d0,a1
-
-	add	L1_CACHE_BYTES,d1			# round end addr up
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
-
-	# write a request to flush and invalidate all instances of an address
-	# from the cache
-	mov	DCACHE_PURGE(0,0),a0
-	mov	a1,d0
-	and	L1_CACHE_TAG_ENTRY,d0
-	add	d0,a0				# starting dcache purge control
-						# reg address
-
-	sub	a1,d1
-	lsr	L1_CACHE_SHIFT,d1		# total number of entries to
-						# examine
-
-mn10300_dcache_flush_inv_range_loop:
-	mov	a1,(L1_CACHE_WAYDISP*0,a0)	# conditionally purge this line
-						# in all ways
-
-	add	L1_CACHE_BYTES,a0
-	add	L1_CACHE_BYTES,a1
-	and	~L1_CACHE_WAYDISP,a0		# make sure way stay on way 0
-	add	-1,d1
-	bne	mn10300_dcache_flush_inv_range_loop
-
-mn10300_dcache_flush_inv_range_end:
-	ret	[d2,d3],8