Merge tag 'v3.9-rc3' into drm-intel-next-queued

Backmerge so that I can merge Imre Deak's coalesced sg entries fixes,
which depend upon the new for_each_sg_page introduce in

commit a321e91b6d73ed011ffceed384c40d2785cf723b
Author: Imre Deak <imre.deak@intel.com>
Date:   Wed Feb 27 17:02:56 2013 -0800

    lib/scatterlist: add simple page iterator

The merge itself is just two trivial conflicts:

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 33 insertions, 33 deletions

diff --git a/arch/mips/include/asm/octeon/cvmx-spi.h b/arch/mips/include/asm/octeon/cvmx-spi.h
index 3bf53b537bcf..d5038cc4b475 100644
--- a/arch/mips/include/asm/octeon/cvmx-spi.h
+++ b/arch/mips/include/asm/octeon/cvmx-spi.h
@@ -84,11 +84,11 @@ static inline int cvmx_spi_is_spi_interface(int interface)
  * Initialize and start the SPI interface.
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  * @num_ports: Number of SPI ports to configure
  *
@@ -102,11 +102,11 @@ extern int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode,
  * with its corespondant system.
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  * Returns Zero on success, negative of failure.
  */
@@ -154,7 +154,7 @@ static inline union cvmx_gmxx_rxx_rx_inbnd cvmx_spi4000_check_speed(
 /**
  * Get current SPI4 initialization callbacks
  *
- * @callbacks:  Pointer to the callbacks structure.to fill
+ * @callbacks:	Pointer to the callbacks structure.to fill
  *
  * Returns Pointer to cvmx_spi_callbacks_t structure.
  */
@@ -171,11 +171,11 @@ extern void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t *new_callbacks);
  * Callback to perform SPI4 reset
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  *
  * Returns Zero on success, non-zero error code on failure (will cause
  * SPI initialization to abort)
@@ -187,11 +187,11 @@ extern int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode);
  * detection
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @num_ports: Number of ports to configure on SPI
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -204,11 +204,11 @@ extern int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode,
  * Callback to perform clock detection
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -221,11 +221,11 @@ extern int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode,
  * Callback to perform link training
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for link to be trained (in seconds)
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -238,11 +238,11 @@ extern int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode,
  * Callback to perform calendar data synchronization
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for calendar data in seconds
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -255,11 +255,11 @@ extern int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode,
  * Callback to handle interface up
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  *
  * Returns Zero on success, non-zero error code on failure (will cause
  * SPI initialization to abort)