Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits)
  [ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option
  [ARM] 4821/1: RealView: Remove the platform dependencies from localtimer.c
  [ARM] 4820/1: RealView: Select the timer IRQ at run-time
  [ARM] 4819/1: RealView: Fix entry-macro.S to work with multiple platforms
  [ARM] 4818/1: RealView: Add core-tile detection
  [ARM] 4817/1: RealView: Move the AMBA resource definitions to realview_eb.c
  [ARM] 4816/1: RealView: Move the platform-specific definitions into board-eb.h
  [ARM] 4815/1: RealView: Add clockevents suport for the local timers
  [ARM] 4814/1: RealView: Add broadcasting clockevents support for ARM11MPCore
  [ARM] 4813/1: Add SMP helper functions for clockevents support
  [ARM] 4812/1: RealView: clockevents support for the RealView platforms
  [ARM] 4811/1: RealView: clocksource support for the RealView platforms
  [ARM] 4736/1: Export atags to userspace and allow kexec to use customised atags
  [ARM] 4798/1: pcm027: fix missing header file
  [ARM] 4803/1: pxa: fix building issue of poodle.c caused by patch 4737/1
  [ARM] 4801/1: pxa: fix building issues of missing pxa2xx-regs.h
  [ARM] pxa: introduce sysdev for pxa3xx static memory controller
  [ARM] pxa: add preliminary suspend/resume code for pxa3xx
  [ARM] pxa: introduce sysdev for GPIO register saving/restoring
  [ARM] pxa: introduce sysdev for IRQ register saving/restoring
  ...

1 files changed, 111 insertions, 23 deletions

diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index c473d408aa7c..688659668bdf 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -1,25 +1,37 @@
 /*
  * DSM-G600 board-setup
  *
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
  * Copyright (C) 2006 Tower Technologies
- * Author: Alessandro Zummo <a.zummo@towertech.it>
  *
- * based ixdp425-setup.c:
+ * based on ixdp425-setup.c:
  *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * based on nslu2-power.c:
+ *	Copyright (C) 2005 Tower Technologies
+ * based on nslu2-io.c:
+ *	Copyright (C) 2004 Karen Spearel
  *
  * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Author: Michael Westerhof <mwester@dls.net>
+ * Author: Rod Whitby <rod@whitby.id.au>
  * Maintainers: http://www.nslu2-linux.org/
  */
 
-#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/reboot.h>
+#include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
+#include <asm/gpio.h>
 
 static struct flash_platform_data dsmg600_flash_data = {
 	.map_name		= "cfi_probe",
@@ -51,29 +63,34 @@ static struct platform_device dsmg600_i2c_gpio = {
 	},
 };
 
-#ifdef CONFIG_LEDS_CLASS
-static struct resource dsmg600_led_resources[] = {
+static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = {
+	{
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+	},
+};
+
+static struct gpio_led dsmg600_led_pins[] = {
 	{
-		.name           = "power",
-		.start          = DSMG600_LED_PWR_GPIO,
-		.end            = DSMG600_LED_PWR_GPIO,
-		.flags          = IXP4XX_GPIO_HIGH,
+		.name		= "power",
+		.gpio		= DSMG600_LED_PWR_GPIO,
 	},
 	{
-		.name           = "wlan",
-		.start		= DSMG600_LED_WLAN_GPIO,
-		.end            = DSMG600_LED_WLAN_GPIO,
-		.flags          = IXP4XX_GPIO_LOW,
+		.name		= "wlan",
+		.gpio		= DSMG600_LED_WLAN_GPIO,
+		.active_low	= true,
 	},
 };
 
+static struct gpio_led_platform_data dsmg600_led_data = {
+	.num_leds		= ARRAY_SIZE(dsmg600_led_pins),
+	.leds			= dsmg600_led_pins,
+};
+
 static struct platform_device dsmg600_leds = {
-        .name                   = "IXP4XX-GPIO-LED",
-        .id                     = -1,
-        .num_resources          = ARRAY_SIZE(dsmg600_led_resources),
-        .resource               = dsmg600_led_resources,
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &dsmg600_led_data,
 };
-#endif
 
 static struct resource dsmg600_uart_resources[] = {
 	{
@@ -121,6 +138,7 @@ static struct platform_device dsmg600_uart = {
 static struct platform_device *dsmg600_devices[] __initdata = {
 	&dsmg600_i2c_gpio,
 	&dsmg600_flash,
+	&dsmg600_leds,
 };
 
 static void dsmg600_power_off(void)
@@ -132,6 +150,57 @@ static void dsmg600_power_off(void)
 	gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
 }
 
+/* This is used to make sure the power-button pusher is serious.  The button
+ * must be held until the value of this counter reaches zero.
+ */
+static int power_button_countdown;
+
+/* Must hold the button down for at least this many counts to be processed */
+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
+
+static void dsmg600_power_handler(unsigned long data);
+static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
+
+static void dsmg600_power_handler(unsigned long data)
+{
+	/* This routine is called twice per second to check the
+	 * state of the power button.
+	 */
+
+	if (gpio_get_value(DSMG600_PB_GPIO)) {
+
+		/* IO Pin is 1 (button pushed) */
+		if (power_button_countdown > 0)
+			power_button_countdown--;
+
+	} else {
+
+		/* Done on button release, to allow for auto-power-on mods. */
+		if (power_button_countdown == 0) {
+			/* Signal init to do the ctrlaltdel action,
+			 * this will bypass init if it hasn't started
+			 * and do a kernel_restart.
+			 */
+			ctrl_alt_del();
+
+			/* Change the state of the power LED to "blink" */
+			gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+		} else {
+			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+		}
+	}
+
+	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
+}
+
+static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
+{
+	/* This is the paper-clip reset, it shuts the machine down directly. */
+	machine_power_off();
+
+	return IRQ_HANDLED;
+}
+
 static void __init dsmg600_timer_init(void)
 {
     /* The xtal on this machine is non-standard. */
@@ -156,7 +225,8 @@ static void __init dsmg600_init(void)
 	dsmg600_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 
-	pm_power_off = dsmg600_power_off;
+	i2c_register_board_info(0, dsmg600_i2c_board_info,
+				ARRAY_SIZE(dsmg600_i2c_board_info));
 
 	/* The UART is required on the DSM-G600 (Redboot cannot use the
 	 * NIC) -- do it here so that it does *not* get removed if
@@ -166,10 +236,28 @@ static void __init dsmg600_init(void)
 
 	platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
 
-#ifdef CONFIG_LEDS_CLASS
-        /* We don't care whether or not this works. */
-        (void)platform_device_register(&dsmg600_leds);
-#endif
+	pm_power_off = dsmg600_power_off;
+
+	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
+		IRQF_DISABLED | IRQF_TRIGGER_LOW,
+		"DSM-G600 reset button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+			gpio_to_irq(DSMG600_RB_GPIO));
+	}
+
+	/* The power button on the D-Link DSM-G600 is on GPIO 15, but
+	 * it cannot handle interrupts on that GPIO line.  So we'll
+	 * have to poll it with a kernel timer.
+	 */
+
+	/* Make sure that the power button GPIO is set up as an input */
+	gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
+
+	/* Set the initial value for the power button IRQ handler */
+	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
 }
 
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")