Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: SoC fixes: from Olof Johansson:
 "A bunch of fixes for regressions (and a few other problems) in
  3.4-rc1:

 - Fix for regression of mach/io.h cleanup on platforms with PCI or
   PCMCIA (adding back the include file on those for now)
 - AT91 fixes for usb and spi
 - smsc911x ethernet fixes for i.MX
 - smsc911x fixes for OMAP
 - gpio fixes for Tegra
 - A handful of build error and warning fixes for various platforms
 - cpufreq kconfig dependencies, build and lowlevel debug fixes for
   Samsung platforms

  In other words, more or less the regular collection of -rc1/2 type
  material.  A few of them, in particular the smsc911x for OMAP series,
  aren't technically regressions for 3.4, but they're valid fixes and
  we're still relatively early in the rc cycle so it seems appropriate
  to include them."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  ARM: fix __io macro for PCMCIA
  ARM: EXYNOS: Fix compiler warning in dma.c file
  ARM: EXYNOS: fix ISO C90 warning
  ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions
  ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status
  ARM: OMAP2+: hwmod: Restore sysc after a reset
  ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules
  ARM: OMAP3: clock data: fill in some missing clockdomains
  ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock
  ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL
  ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch()
  gpio: tegra: Iterate over the correct number of banks
  gpio: tegra: fix register address calculations for Tegra30
  EXYNOS: fix dependency for EXYNOS_CPUFREQ
  ARM: at91: dt: remove unit-address part for memory nodes
  ARM: at91: fix check of valid GPIO for SPI and USB
  USB: ehci-atmel: add needed of.h header file
  ARM: at91/NAND DT bindings: add comments
  ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file
  USB: ohci-at91: trivial return code name change
  ...

4 files changed, 21 insertions, 8 deletions

diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index e6cc50e94a58..8614aab47cc0 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -583,10 +583,11 @@ core_initcall(exynos_core_init);
 #ifdef CONFIG_CACHE_L2X0
 static int __init exynos4_l2x0_cache_init(void)
 {
+	int ret;
+
 	if (soc_is_exynos5250())
 		return 0;
 
-	int ret;
 	ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
 	if (!ret) {
 		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 3983abee4264..69aaa4503205 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -35,8 +35,6 @@
 #include <mach/irqs.h>
 #include <mach/dma.h>
 
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
 static u8 exynos4210_pdma0_peri[] = {
 	DMACH_PCM0_RX,
 	DMACH_PCM0_TX,
diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S
index 6c857ff0b5d8..e0c86ea475e7 100644
--- a/arch/arm/mach-exynos/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
@@ -21,10 +21,9 @@
 	 */
 
 	.macro addruart, rp, rv, tmp
-		mov	\rp, #0x10000000
-		ldr	\rp, [\rp, #0x0]
-		and	\rp, \rp, #0xf00000
-		teq	\rp, #0x500000		@@ EXYNOS5
+		mrc	p15, 0, \tmp, c0, c0, 0
+		and	\tmp, \tmp, #0xf0
+		teq	\tmp, #0xf0		@@ A15
 		ldreq	\rp, =EXYNOS5_PA_UART
 		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
 		ldr	\rv, =S3C_VA_UART
diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
index 493f4f365ddf..2979995d5a6a 100644
--- a/arch/arm/mach-exynos/include/mach/uncompress.h
+++ b/arch/arm/mach-exynos/include/mach/uncompress.h
@@ -20,9 +20,24 @@ volatile u8 *uart_base;
 
 #include <plat/uncompress.h>
 
+static unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
 static void arch_detect_cpu(void)
 {
-	if (machine_is_smdk5250())
+	u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID);
+
+	/*
+	 * product_id is bits 31:12
+	 *    bits 23:20 describe the exynosX family
+	 *
+	 */
+	chip_id >>= 20;
+	chip_id &= 0xf;
+
+	if (chip_id == 0x5)
 		uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
 	else
 		uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);