Merge tag 'omap-for-v4.4/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "Device tree changes for omaps for v4.4 merge window:" from Tony Lindgren:

- DCAN sleep pins for am437x-gp-evm

- A series of changes to add audio support for dra7

- Add support for gpio keys and LEDs on dra7

- Regulator clean-up for am335x-wega

- A series of changes to enable IOMMUs and mailboxes for dra7
  accelerators

- Add support for am335x-bonegreen

- Fix up GPIO flags where 0 was used instead of GPIO_ACTIVE_HIGH

- Fix omap3-lilly-am33x IRQ level flag

- Remove duplicate uart2 pinmux for igep and fix indentation and
  update igep to use pinctrl macros for the register offsets

- Fix MMC cd-gpios usage

Note that this branch is against v4.3-rc4 as that contains critical
MMC related fixes to boot with MMC working on most omaps.

* tag 'omap-for-v4.4/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (33 commits)
  ARM: dts: omap3-igep: Use OMAP3_CORE1_IOPAD pinmux macro
  ARM: dts: dra7xx: am57xx: fix cd-gpios definition as per hardware design and dt binding docs
  ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs
  ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt binding docs
  ARM: dts: omap3-igep0020: Remove duplicate uart2 pinmux
  ARM: dts: omap3-igep: Fix indentation
  ARM: dts: omap3-lilly-a83x: Don't use IRQ level flag for a GPIO
  ARM: dts: DRA74x: Add IOMMU nodes for DSP2
  ARM: dts: DRA7: Add common IOMMU nodes
  ARM: dts: DRA74x: Add dsp2_system syscon node
  ARM: dts: DRA7: Add dsp1_system syscon node
  ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards
  ARM: dts: Add am335x-bonegreen
  ARM: dts: beagle-x15: Enable the system mailboxes 5 and 6
  ARM: dts: dra72-evm: Enable the system mailboxes 5 and 6
  ARM: dts: dra7-evm: Enable the system mailboxes 5 and 6
  ARM: dts: DRA72x: Add IPC sub-mailbox nodes for IPU1, IPU2 & DSP1
  ARM: dts: DRA74x: Add IPC sub-mailbox nodes for all IPUs & DSPs
  ARM: dts: am335x-wega: Clean up regulators
  ARM: dts: dra7-evm: add gpio key support
  ...

44 files changed, 805 insertions, 116 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e6cf5283cb9c..ad3ac4afb183 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -454,6 +454,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-base0033.dtb \
 	am335x-bone.dtb \
 	am335x-boneblack.dtb \
+	am335x-bonegreen.dtb \
 	am335x-sl50.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index fec78349c1f3..5d370d54bd30 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -383,8 +383,7 @@
 	bus-width = <0x4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &aes {
diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts
new file mode 100644
index 000000000000..0f65bdaaa583
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bonegreen.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone Green";
+	compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	uart2_pins: uart2_pins {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT | MUX_MODE1)	/* spi0_sclk.uart2_rxd */
+			0x154 (PIN_OUTPUT | MUX_MODE1)	/* spi0_d0.uart2_txd */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&rtc {
+	system-power-controller;
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 1942a5c8132d..d9d00ab863a2 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -737,7 +737,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &mmc3 {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 315bb02c9920..89442e98a837 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -647,7 +647,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &sham {
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 5dd084f3c81c..2f43e458ea4a 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -29,8 +29,17 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
+	regulators {
+		compatible = "simple-bus";
+
+		vcc5v: fixedregulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vcc5v";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
 	};
 };
 
@@ -233,14 +242,14 @@
 #include "tps65910.dtsi"
 
 &tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
+	vcc1-supply = <&vcc5v>;
+	vcc2-supply = <&vcc5v>;
+	vcc3-supply = <&vcc5v>;
+	vcc4-supply = <&vcc5v>;
+	vcc5-supply = <&vcc5v>;
+	vcc6-supply = <&vcc5v>;
+	vcc7-supply = <&vcc5v>;
+	vccio-supply = <&vcc5v>;
 
 	regulators {
 		vrtc_reg: regulator@0 {
@@ -311,13 +320,6 @@
 	};
 };
 
-&vbat {
-	regulator-name = "vbat";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-	regulator-boot-on;
-};
-
 /* SPI Busses */
 &am33xx_pinmux {
 	spi0_pins: pinmux_spi0 {
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 5e541bd1b45a..2cecb3951e1b 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -11,6 +11,17 @@
 	model = "Phytec AM335x phyBOARD-WEGA";
 	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
 
+	regulators {
+		compatible = "simple-bus";
+
+		vcc3v3: fixedregulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "vcc3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+		};
+	};
 };
 
 /* CAN Busses */
@@ -80,7 +91,7 @@
 };
 
 &mmc1 {
-	vmmc-supply = <&vmmc_reg>;
+	vmmc-supply = <&vcc3v3>;
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 22038f21f228..b259d7c29bcd 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -304,6 +304,13 @@
 		>;
 	};
 
+	dcan0_sleep: dcan0_sleep_pins {
+		pinctrl-single,pins = <
+			0x178 (PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_ctsn.gpio0_12 */
+			0x17c (PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rtsn.gpio0_13 */
+		>;
+	};
+
 	dcan1_default: dcan1_default_pins {
 		pinctrl-single,pins = <
 			0x180 (PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
@@ -311,6 +318,13 @@
 		>;
 	};
 
+	dcan1_sleep: dcan1_sleep_pins {
+		pinctrl-single,pins = <
+			0x180 (PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rxd.gpio0_14 */
+			0x184 (PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_txd.gpio0_15 */
+		>;
+	};
+
 	vpfe0_pins_default: vpfe0_pins_default {
 		pinctrl-single,pins = <
 			0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
@@ -689,7 +703,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 /* eMMC sits on mmc2 */
@@ -886,14 +900,16 @@
 };
 
 &dcan0 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&dcan0_default>;
+	pinctrl-1 = <&dcan0_sleep>;
 	status = "okay";
 };
 
 &dcan1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&dcan1_default>;
+	pinctrl-1 = <&dcan1_sleep>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index af25801418b4..337fb91ee74c 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -325,7 +325,7 @@
 	pinctrl-1 = <&mmc1_pins_sleep>;
 	vmmc-supply = <&v3_3d>;
 	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &qspi {
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 7da7c2da4af1..1582fdbeaf76 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -563,7 +563,7 @@
 
 	vmmc-supply = <&dcdc4>;
 	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &usb2_phy1 {
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 86c2dfbe8875..47954ed990f8 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -376,7 +376,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &mac {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 568adf5efde0..341ec8825c51 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -35,6 +35,14 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	aic_dvdd: fixedregulator-aic_dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd_fixed";
+		vin-supply = <&vdd_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vtt_fixed: fixedregulator-vtt {
 		/* TPS51200 */
 		compatible = "regulator-fixed";
@@ -142,6 +150,32 @@
 			};
 		};
 	};
+
+	sound0: sound@0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "BeagleBoard-X15";
+		simple-audio-card,widgets =
+			"Line", "Line Out",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Line Out",	"LLOUT",
+			"Line Out",	"RLOUT",
+			"MIC2L",	"Line In",
+			"MIC2R",	"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3104>;
+			clocks = <&clkout2_clk>;
+		};
+	};
 };
 
 &dra7_pmx_core {
@@ -326,6 +360,36 @@
 			0x370 (PIN_OUTPUT | MUX_MODE14)		/* gpio6_28 LS_OE */
 		>;
 	};
+
+	clkout2_pins_default: clkout2_pins_default {
+		pinctrl-single,pins = <
+			0x294 (PIN_OUTPUT_PULLDOWN | MUX_MODE9)	/* xref_clk0.clkout2 */
+		>;
+	};
+
+	clkout2_pins_sleep: clkout2_pins_sleep {
+		pinctrl-single,pins = <
+			0x294 (PIN_INPUT | MUX_MODE15)	/* xref_clk0.clkout2 */
+		>;
+	};
+
+	mcasp3_pins_default: mcasp3_pins_default {
+		pinctrl-single,pins = <
+			0x324 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+			0x328 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+			0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+			0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+		>;
+	};
+
+	mcasp3_pins_sleep: mcasp3_pins_sleep {
+		pinctrl-single,pins = <
+			0x324 (PIN_INPUT | MUX_MODE15)
+			0x328 (PIN_INPUT | MUX_MODE15)
+			0x32c (PIN_INPUT | MUX_MODE15)
+			0x330 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
 };
 
 &i2c1 {
@@ -510,6 +574,22 @@
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 		#thermal-sensor-cells = <1>;
 	};
+
+	tlv320aic3104: tlv320aic3104@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3104";
+		reg = <0x18>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&clkout2_pins_default>;
+		pinctrl-1 = <&clkout2_pins_sleep>;
+		status = "okay";
+		adc-settle-ms = <40>;
+
+		AVDD-supply = <&vdd_3v3>;
+		IOVDD-supply = <&vdd_3v3>;
+		DRVDD-supply = <&vdd_3v3>;
+		DVDD-supply = <&aic_dvdd>;
+	};
 };
 
 &i2c3 {
@@ -585,7 +665,7 @@
 
 	vmmc-supply = <&ldo1_reg>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
 };
 
 &mmc2 {
@@ -708,3 +788,38 @@
 &pcie1 {
 	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp3_pins_default>;
+	pinctrl-1 = <&mcasp3_pins_sleep>;
+	status = "okay";
+
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index a6c82e5b64fe..864f60020124 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -9,6 +9,8 @@
 
 #include "dra74x.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "TI DRA742";
@@ -28,13 +30,22 @@
 		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
 	};
 
-	mmc2_3v3: fixedregulator-mmc2 {
+	evm_3v3_sw: fixedregulator-evm_3v3_sw {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc2_3v3";
+		regulator-name = "evm_3v3_sw";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&evm_3v3_sw>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
 		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
@@ -55,6 +66,86 @@
 		enable-active-high;
 		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
 	};
+
+	sound0: sound@0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DRA7xx-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"Line Out",		"LLOUT",
+			"Line Out",		"RLOUT",
+			"MIC3L",		"Mic Jack",
+			"MIC3R",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+			system-clock-frequency = <5644800>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&atl_clkin2_ck>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@0 {
+			label = "dra7:usr1";
+			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "dra7:usr2";
+			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "dra7:usr3";
+			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "dra7:usr4";
+			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		USER1 {
+			label = "btnUser1";
+			linux,code = <BTN_0>;
+			gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
+		};
+
+		USER2 {
+			label = "btnUser2";
+			linux,code = <BTN_1>;
+			gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &dra7_pmx_core {
@@ -283,6 +374,31 @@
 			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
 		>;
 	};
+
+	atl_pins: pinmux_atl_pins {
+		pinctrl-single,pins = <
+			0x298 (PIN_OUTPUT | MUX_MODE5)	/* xref_clk1.atl_clk1 */
+			0x29c (PIN_OUTPUT | MUX_MODE5)	/* xref_clk2.atl_clk2 */
+		>;
+	};
+
+	mcasp3_pins: pinmux_mcasp3_pins {
+		pinctrl-single,pins = <
+			0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_aclkx */
+			0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_fsx */
+			0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr0 */
+			0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr1 */
+		>;
+	};
+
+	mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
+		pinctrl-single,pins = <
+			0x324 (MUX_MODE15)
+			0x328 (MUX_MODE15)
+			0x32c (MUX_MODE15)
+			0x330 (MUX_MODE15)
+		>;
+	};
 };
 
 &i2c1 {
@@ -410,6 +526,17 @@
 		};
 	};
 
+	pcf_lcd: gpio@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 	pcf_gpio_21: gpio@21 {
 		compatible = "ti,pcf8575";
 		reg = <0x21>;
@@ -422,6 +549,20 @@
 		#interrupt-cells = <2>;
 	};
 
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&evm_3v3_sw>;
+		IOVDD-supply = <&evm_3v3_sw>;
+		DRVDD-supply = <&evm_3v3_sw>;
+		DVDD-supply = <&aic_dvdd>;
+	};
 };
 
 &i2c2 {
@@ -429,6 +570,20 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
+
+	pcf_hdmi: gpio@26 {
+		compatible = "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		p1 {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
+	};
 };
 
 &i2c3 {
@@ -479,12 +634,12 @@
 	 * SDCD signal is not being used here - using the fact that GPIO mode
 	 * is always hardwired.
 	 */
-	cd-gpios = <&gpio6 27 0>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
 };
 
 &mmc2 {
 	status = "okay";
-	vmmc-supply = <&mmc2_3v3>;
+	vmmc-supply = <&evm_3v3_sw>;
 	bus-width = <8>;
 };
 
@@ -707,3 +862,62 @@
 	pinctrl-1 = <&dcan1_pins_sleep>;
 	pinctrl-2 = <&dcan1_pins_default>;
 };
+
+&atl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&atl_pins>;
+
+	assigned-clocks = <&abe_dpll_sys_clk_mux>,
+			  <&atl_gfclk_mux>,
+			  <&dpll_abe_ck>,
+			  <&dpll_abe_m2x2_ck>,
+			  <&atl_clkin2_ck>;
+	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp3_pins>;
+	pinctrl-1 = <&mcasp3_sleep_pins>;
+
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&atl_clkin2_ck>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index e289c706d27d..a635f363d831 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -292,6 +292,11 @@
 				#thermal-sensor-cells = <1>;
 		};
 
+		dsp1_system: dsp_system@40d00000 {
+			compatible = "syscon";
+			reg = <0x40d00000 0x100>;
+		};
+
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -911,6 +916,46 @@
 			status = "disabled";
 		};
 
+		mmu0_dsp1: mmu@40d01000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x40d01000 0x100>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu0_dsp1";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+			status = "disabled";
+		};
+
+		mmu1_dsp1: mmu@40d02000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x40d02000 0x100>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu1_dsp1";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+			status = "disabled";
+		};
+
+		mmu_ipu1: mmu@58882000 {
+			compatible = "ti,dra7-iommu";
+			reg = <0x58882000 0x100>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu1";
+			#iommu-cells = <0>;
+			ti,iommu-bus-err-back;
+			status = "disabled";
+		};
+
+		mmu_ipu2: mmu@55082000 {
+			compatible = "ti,dra7-iommu";
+			reg = <0x55082000 0x100>;
+			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu2";
+			#iommu-cells = <0>;
+			ti,iommu-bus-err-back;
+			status = "disabled";
+		};
+
 		abb_mpu: regulator-abb-mpu {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_mpu";
@@ -1404,6 +1449,21 @@
 			status = "disabled";
 		};
 
+		mcasp3: mcasp@48468000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp3";
+			reg = <0x48468000 0x2000>;
+			reg-names = "mpu";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp3_ahclkx_mux>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
 		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 6f6bd98c98df..27e414295acc 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -9,6 +9,7 @@
 
 #include "dra72x.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
 
 / {
 	model = "TI DRA722";
@@ -30,6 +31,15 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&evm_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	evm_3v3_sd: fixedregulator-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "evm_3v3_sd";
@@ -93,6 +103,40 @@
 			};
 		};
 	};
+
+	sound0: sound@0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DRA7xx-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT",
+			"Line Out",		"LLOUT",
+			"Line Out",		"RLOUT",
+			"MIC3L",		"Mic Jack",
+			"MIC3R",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"LINE1L",               "Line In",
+			"LINE1R",               "Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+			system-clock-frequency = <5644800>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&atl_clkin2_ck>;
+		};
+	};
 };
 
 &dra7_pmx_core {
@@ -110,6 +154,13 @@
 		>;
 	};
 
+	i2c5_pins: pinmux_i2c5_pins {
+		pinctrl-single,pins = <
+			0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+			0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+		>;
+	};
+
 	nand_default: nand_default {
 		pinctrl-single,pins = <
 			0x0	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
@@ -220,6 +271,31 @@
 			0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
 		>;
 	};
+
+	atl_pins: pinmux_atl_pins {
+		pinctrl-single,pins = <
+			0x298 (PIN_OUTPUT | MUX_MODE5)	/* xref_clk1.atl_clk1 */
+			0x29c (PIN_OUTPUT | MUX_MODE5)	/* xref_clk2.atl_clk2 */
+		>;
+	};
+
+	mcasp3_pins: pinmux_mcasp3_pins {
+		pinctrl-single,pins = <
+			0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_aclkx */
+			0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_fsx */
+			0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr0 */
+			0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr1 */
+		>;
+	};
+
+	mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
+		pinctrl-single,pins = <
+			0x324 (PIN_INPUT_PULLDOWN | MUX_MODE15)
+			0x328 (PIN_INPUT_PULLDOWN | MUX_MODE15)
+			0x32c (PIN_INPUT_PULLDOWN | MUX_MODE15)
+			0x330 (PIN_INPUT_PULLDOWN | MUX_MODE15)
+		>;
+	};
 };
 
 &i2c1 {
@@ -360,6 +436,21 @@
 			output-low;
 		};
 	};
+
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&evm_3v3>;
+		IOVDD-supply = <&evm_3v3>;
+		DRVDD-supply = <&evm_3v3>;
+		DVDD-supply = <&aic_dvdd>;
+	};
 };
 
 &i2c5 {
@@ -380,6 +471,14 @@
 		 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
 		 */
 		lines-initial-states = <0x0f2b>;
+
+		p1 {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
 	};
 };
 
@@ -514,7 +613,7 @@
 	 * SDCD signal is not being used here - using the fact that GPIO mode
 	 * is a viable alternative
 	 */
-	cd-gpios = <&gpio6 27 0>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
 	max-frequency = <192000000>;
 };
 
@@ -695,3 +794,59 @@
 		};
 	};
 };
+
+&atl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&atl_pins>;
+
+	assigned-clocks = <&abe_dpll_sys_clk_mux>,
+			  <&atl_gfclk_mux>,
+			  <&dpll_abe_ck>,
+			  <&dpll_abe_m2x2_ck>,
+			  <&atl_clkin2_ck>;
+	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp3_pins>;
+	pinctrl-1 = <&mcasp3_sleep_pins>;
+
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&atl_clkin2_ck>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index eaca143faa77..70a217050a4c 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -45,3 +45,24 @@
 		 <&dss_video1_clk>;
 	clock-names = "fck", "video1_clk";
 };
+
+&mailbox5 {
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&mailbox6 {
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index feea98e0a4b5..8bcc47db1cd1 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -52,6 +52,11 @@
 	};
 
 	ocp {
+		dsp2_system: dsp_system@41500000 {
+			compatible = "syscon";
+			reg = <0x41500000 0x100>;
+		};
+
 		omap_dwc3_4: omap_dwc3_4@48940000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss4";
@@ -76,6 +81,26 @@
 				dr_mode = "otg";
 			};
 		};
+
+		mmu0_dsp2: mmu@41501000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x41501000 0x100>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu0_dsp2";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+			status = "disabled";
+		};
+
+		mmu1_dsp2: mmu@41502000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x41502000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu1_dsp2";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+			status = "disabled";
+		};
 	};
 };
 
@@ -93,3 +118,29 @@
 		 <&dss_video2_clk>;
 	clock-names = "fck", "video1_clk", "video2_clk";
 };
+
+&mailbox5 {
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&mailbox6 {
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
index c9f1e93a95ae..8491f46c61b7 100644
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -9,9 +9,9 @@
 	ocp {
 		i2c@0 {
 			compatible = "i2c-cbus-gpio";
-			gpios = <&gpio3 2 0 /* gpio66 clk */
-				 &gpio3 1 0 /* gpio65 dat */
-				 &gpio3 0 0 /* gpio64 sel */
+			gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */
+				 &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */
+				 &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */
 				>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 7c4dca122a91..73f1e3a8f62c 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -80,7 +80,7 @@
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
 		startup-delay-us = <70000>;
 	};
 
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 67659a0ed13e..274c2c482aaa 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -55,7 +55,7 @@
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
 		startup-delay-us = <70000>;
 	};
 
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index 4d091ca43e25..8c813e77b17f 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -224,7 +224,7 @@
 
 		interrupt-parent = <&gpio2>;
 		interrupts = <25 0>;		/* gpio_57 */
-		pendown-gpio = <&gpio2 25 0>;
+		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index e84184de2a4a..4813e96157b3 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -54,7 +54,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <27 0>;		/* gpio_27 */
-		pendown-gpio = <&gpio1 27 0>;
+		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index b2589f96d5f7..090475083c2f 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -26,7 +26,7 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio5 22 0>;	/* gpio150 */
+		gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>;	/* gpio150 */
 		startup-delay-us = <70000>;
 		enable-active-high;
 		vin-supply = <&vmmc2>;
@@ -91,7 +91,7 @@
 	tsc2046@0 {
 		interrupt-parent = <&gpio6>;
 		interrupts = <15 0>;		/* gpio175 */
-		pendown-gpio = <&gpio6 15 0>;
+		pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 7166d8876ea8..e14d15e5abc8 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -77,10 +77,10 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi_gpio_pins>;
 
-		gpio-sck = <&gpio1 12 0>;
-		gpio-miso = <&gpio1 18 0>;
-		gpio-mosi = <&gpio1 20 0>;
-		cs-gpios = <&gpio1 19 0>;
+		gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
 		/* lcd panel */
@@ -118,7 +118,7 @@
 
 	tv_amp: opa362 {
 		compatible = "ti,opa362";
-		enable-gpios = <&gpio1 23 0>;
+		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index 52b386f6865b..600b6ca5a1bd 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -12,6 +12,6 @@
 	model = "Goldelico GTA04A5";
 
 	sound {
-		ti,jack-det-gpio = <&twl_gpio 2 0>;    /* GTA04A5 only */
+		ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;    /* GTA04A5 only */
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 2230e1c03320..09a438ebfbbe 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -35,60 +35,60 @@
 &omap3_pmx_core {
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x152 (PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
-			0x14c (PIN_OUTPUT |MUX_MODE0)		/* uart1_tx.uart1_tx */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)	/* uart1_rx.uart1_rx */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)	/* uart1_tx.uart1_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx.uart3_rx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx.uart3_tx */
 		>;
 	};
 
 	mcbsp2_pins: pinmux_mcbsp2_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT | MUX_MODE0)		/* mcbsp2_fsx.mcbsp2_fsx */
-			0x10e (PIN_INPUT | MUX_MODE0)		/* mcbsp2_clkx.mcbsp2_clkx */
-			0x110 (PIN_INPUT | MUX_MODE0)		/* mcbsp2_dr.mcbsp2.dr */
-			0x112 (PIN_OUTPUT | MUX_MODE0)		/* mcbsp2_dx.mcbsp2_dx */
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
 		>;
 	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x18a (PIN_INPUT | MUX_MODE0)   /* i2c1_scl.i2c1_scl */
-			0x18c (PIN_INPUT | MUX_MODE0)   /* i2c1_sda.i2c1_sda */
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0x192 (PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
-			0x194 (PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
 		>;
 	};
 };
@@ -155,7 +155,7 @@
 		twl_audio: audio {
 			compatible = "ti,twl4030-audio";
 			codec {
-			      };
+			};
 		};
 	};
 };
@@ -175,11 +175,11 @@
 };
 
 &mmc1 {
-      pinctrl-names = "default";
-      pinctrl-0 = <&mmc1_pins>;
-      vmmc-supply = <&vmmc1>;
-      vmmc_aux-supply = <&vsim>;
-      bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <4>;
 };
 
 &mmc3 {
@@ -187,13 +187,13 @@
 };
 
 &uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
 };
 
 &uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
 };
 
 &twl_gpio {
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index fea7f7edb45d..5683b8bf3475 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -45,15 +45,6 @@
 			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - RST_N_B */
 		>;
 	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
-		>;
-	};
 };
 
 /* On board Wifi module */
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index bd6e6769c7ce..d2fab8c0d4f8 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -200,7 +200,7 @@
 	tsc2046@0 {
 		interrupt-parent = <&gpio2>;
 		interrupts = <22 0>;		/* gpio54 */
-		pendown-gpio = <&gpio2 22 0>;
+		pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index d0dd0365bfda..57d7c93cc72b 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -284,7 +284,7 @@
 };
 
 &mmc1 {
-	cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+	cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
 	cd-inverted;
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
@@ -314,7 +314,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 0>;   /* boot6 / gpio_8 */
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio1 8 0>;
+		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		vcc-supply = <&reg_vcc3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsc2048_pins>;
diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
index 834f7c65f62d..0e3c9812f4e3 100644
--- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts
+++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
@@ -114,8 +114,8 @@
 	status = "okay";
 	bus-width = <4>;
 	vmmc-supply = <&vmmc1>;
-	cd-gpios = <&gpio6 4 0>;   /* gpio_164 */
-	wp-gpios = <&gpio6 3 0>;   /* gpio_163 */
+	cd-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;   /* gpio_164 */
+	wp-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;   /* gpio_163 */
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 	ti,dual-volt;
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 800b379d368d..e9ee1df0e467 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -27,7 +27,7 @@
 		regulator-name = "VEMMC";
 		regulator-min-microvolt = <2900000>;
 		regulator-max-microvolt = <2900000>;
-		gpio = <&gpio5 29 0>; /* gpio line 157 */
+		gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
 		startup-delay-us = <150>;
 		enable-active-high;
 	};
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index 28430f1596f2..a29ad16cc9bb 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -35,7 +35,7 @@
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio6 8 0>;				/* gpio_168: vbus enable */
+		gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>;		/* gpio_168: vbus enable */
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 80d236ac64a5..b09cedf66117 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -152,7 +152,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 0>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 048fd216970a..5f979590571b 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -163,7 +163,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 0>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index f2084e6d01e7..cfe140c657e7 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -218,7 +218,7 @@
 		regulator-always-on;
 		regulator-boot-on;
 		enable-active-high;
-		gpio = <&gpio6 4 0>;	/* GPIO_164 */
+		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* GPIO_164 */
 	};
 
 	/* wg7210 (wifi+bt module) 32k clock buffer */
@@ -607,7 +607,7 @@
 		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <30 0>;	/* GPIO_94 */
-		pendown-gpio = <&gpio3 30 0>;
+		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
 		vcc-supply = <&vaux4>;
 
 		ti,x-min = /bits/ 16 <0>;
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index 7bd8d9a4f67f..ae5dbbd9d569 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -37,7 +37,7 @@
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
 		startup-delay-us = <70000>;
 	};
 
@@ -225,7 +225,7 @@
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	vmmc_aux-supply = <&vsim>;
-	cd-gpios = <&twl_gpio 0 0>;
+	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
 	bus-width = <8>;
 };
 
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 131448d86e67..7bc5fdd6981e 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -44,7 +44,7 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio4 5 0>;	/* gpio101 */
+		gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index f1507bc8737e..18d096696fc0 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -68,7 +68,7 @@
 		regulator-name = "hsusb1_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 1 0>;	/* gpio_1 */
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;	/* gpio_1 */
 		startup-delay-us = <70000>;
 		enable-active-high;
 		/*
@@ -98,7 +98,7 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 11 0>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index dac86ed7481f..f0bdc41f8eff 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -30,7 +30,7 @@
 		regulator-name = "VDD_ETH";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 16 0>;  /* gpio line 48 */
+		gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;  /* gpio line 48 */
 		enable-active-high;
 		regulator-boot-on;
 	};
@@ -155,7 +155,7 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 22 0>;
+		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
@@ -374,7 +374,7 @@
 
 		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
 		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio4 31 0>;  /* gpio line 127 */
+		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
 
 		vio-supply = <&v1v8>;
 		v2v1-supply = <&v2v1>;
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
index 9bceeb7e1f03..1c5f6f35e1cf 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@@ -15,7 +15,7 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 11 0>;	/* gpio 43 */
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;	/* gpio 43 */
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
index a4f1ba2e1903..49d032b846be 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -196,7 +196,7 @@
 
 		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
 		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
+		ti,audpwron-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio 182 */
 
 		vio-supply = <&v1v8>;
 		v2v1-supply = <&v2v1>;
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 194f9ef0a009..5fa68f191af7 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -46,7 +46,7 @@
 			       0x4a002378 0x18>;
 			compatible = "ti,omap4460-bandgap";
 			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
-			gpios = <&gpio3 22 0>; /* tshut */
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */
 
 			#thermal-sensor-cells = <0>;
 		};
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index 61ad2ea34720..3774b37be6c8 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -344,7 +344,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <15 0>;			/* gpio1_wk15 */
-		pendown-gpio = <&gpio1 15 0>;
+		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 3cb030f9d2c4..4da9e52f147b 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -527,7 +527,7 @@
 		pinctrl-0 = <&twl6040_pins>;
 
 		interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio5 13 0>;  /* gpio line 141 */
+		ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */
 
 		vio-supply = <&smps7_reg>;
 		v2v1-supply = <&smps9_reg>;