From ea8bc0b643ba31d5b74ea3c018956b832b98dc5a Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Thu, 24 Oct 2013 18:20:35 +0200 Subject: colibri_vf61: initial integration Add initial Colibri VF61 support based off Timesys' implementation for Freescale's Vybrid Tower System TWR-VF65GS10: - New machine ID. - Default UART_A on SCI0. - ESDHC2 only. - 8-bit NAND. - No quad SPI. - FEC1 only. - Enabled command line editing. - PLL5 based RMII clocking (e.g. no external crystal). - UART_A, UART_B and UART_C I/O muxing. - Increase the available space for the U-Boot binary to half a megabyte by booting from gfxRAM rather than sysRAM0. - Integrate factory configuration block handling for hardware version, MAC address and serial number to be passed to Linux. - The U-Boot environment is stored in NAND flash. - Fix long standing boot hang issue introduced by Freescale's Vybrid 1.1 silicon. - Proper 256 MB Nanya DDR3 RAM timings. Tested on early Colibri VF61 prototypes V1.0b and V1.0c using SD card (mandatory for initial loading) as well as NAND boot. --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index a8c16f75c8..f3b200fc9c 100644 --- a/Makefile +++ b/Makefile @@ -790,7 +790,7 @@ backup: F=`basename $(TOPDIR)` ; cd .. ; \ gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F -ifeq ($(BOARD),colibri_vf50) +ifneq (,$(filter $(BOARD),colibri_vf50 colibri_vf61)) .DEFAULT_GOAL := u-boot.imx ifeq ($(CONFIG_NANDBOOT),y) .DEFAULT_GOAL := u-boot.nand -- cgit v1.2.3