| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
U-Boot in the current 4.9.123 form freezes when initalizing HSIO.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 68a2be9b6247eaf5ac577082d8d5c0c930d37132)
|
|
Current samples are strapped to boot from SD card by default. Also
make sure that the default U-Boot environment boots from SD card.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit 67cf06ee02ba39a93fbfd4ed2e82509ec86ba53e)
(cherry picked from commit 82ffe3f0c08c9c4f8e988e1402dc814b71e3be92)
(cherry picked from commit 1d7c4df41d20cb2447a6512de42475f8d754c905)
|
|
Add Toradex config block support for i.MX8QM.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit 18426b50681e6cd64ab5977f0ba84efd3f7c4495)
(cherry picked from commit c6d0e1042170d273a5b5434abe867213155d5582)
(cherry picked from commit ae31e946da33510a352795de09aa1c0ea9fc8280)
|
|
Add default memory layout and networking options typically used
on Toradex modules.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit 261060112cc55c25e672f6b73374d2a80e00a2e4)
(cherry picked from commit 26db8b3fd1ad8bac8921f0ac11cb29364dc1bbaf)
(cherry picked from commit 3bf49ccc73b2685eb965bcd61907bcffab3f3fd3)
|
|
Use USDHC1 which is eMMC to store U-Boot environment and as default
root device for Linux.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit 65b8faac518e90ba1b53013e4639e2cd41e6bf2f)
(cherry picked from commit 5b235d487dea79976597368d2edac64c1b468e4c)
(cherry picked from commit f7bc9e4e18a15e44bc0a06afe0abaddb03f4e9c0)
|
|
Extend bootcmd to also load the HDMI firmware through hdp
command.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit 41ef3986ae21dc6fcc4355ab53ccc809d80d361e)
(cherry picked from commit 94d78f51638f4ab3519b845c4fbffe92865cc5b3)
(cherry picked from commit cad9542ed852cee3d3dd0b6c25a36a0de6f22c29)
|
|
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit 04e7012224b6971972cb76415980c835a2ba9654)
(cherry picked from commit 0759efaef277ff5e0583a4808593a36d7de0353d)
(cherry picked from commit 6ceb16bf22088785c53d751328347f0b6579fafe)
|
|
NXP LPUART1 is used as Apalis UART1, which is the main console
on our Linux BSP.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit 360629c1fd6187de19d0f50feb85c725995e49cc)
(cherry picked from commit 63030dac6afc51d17b04d23ce41af4788f03717e)
(cherry picked from commit 7bbe1708e0cebf3432c234ea74f8d6fb632a023b)
|
|
Make sure that all pins connected to the Micrel KSZ9031 PHY
are muxed. Properly reset the PHY after all muxing has been
applied. This makes sure that strapping is not overwritten by
the SoC default mux (particularly it makes sure that CLK125_NDO
is not driven low during reset).
Make sure to not use CONFIG_DM_ETH as it seems to break ETH
support as is.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit f0a1ceb6f5e2ab3b3618190541b1e7a9fd4c1e4a)
(cherry picked from commit 8f6405070189a8744c2f6a9d9a6e041554fb9046)
(cherry picked from commit 6f24c637fd7725a27249d6a950f587134f30b97c)
|
|
The Apalis iMX8 module does not have PCA9557 GPIO controllers
on the module.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit c80b3bfbe693d5a8851129f4878d0cd3a7325d13)
(cherry picked from commit 898ae105703cd0019a542bc0a17649339c934fa6)
(cherry picked from commit 69d385444efa79d2909f772c4a4b404d1bd7274d)
|
|
Initial board support for Apalis iMX8 using a copy of NXP
iMX8QM ARM2 LPDDR4 board.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
(cherry picked from commit 68e401998ba0654292b7914b85433d8453202ec8)
(cherry picked from commit 6b9234fa1f5889f0eeecc6147afffbc859933c99)
(cherry picked from commit 0b7feded806717b4292615373ed6c018324b8ef5)
Conflicts:
arch/arm/cpu/armv8/imx8/Kconfig, file moved
|
