summaryrefslogtreecommitdiff
path: root/doc/README.usb
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-11-02 23:30:20 +0000
committerwdenk <wdenk>2002-11-02 23:30:20 +0000
commite221174377d7e3ee848e014b96430d4c97023e93 (patch)
treecfaa85f367bc58b8770b3dabf4e9fd64121127bf /doc/README.usb
parent7ebf7443ad018a0647f549a835a55f0c08d7a15d (diff)
Initial revision
Diffstat (limited to 'doc/README.usb')
-rw-r--r--doc/README.usb80
1 files changed, 80 insertions, 0 deletions
diff --git a/doc/README.usb b/doc/README.usb
new file mode 100644
index 0000000000..41f76f4b7e
--- /dev/null
+++ b/doc/README.usb
@@ -0,0 +1,80 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+USB Support for PIP405 and MIP405 (UHCI)
+========================================
+
+The USB support is implemented on the base of the UHCI Host
+controller.
+
+Currently supported are USB Hubs, USB Keyboards and USB Floppys.
+Tested with a TEAC Floppy TEAC FD-05PUB and Chicony KU-8933 Keyboard.
+
+How it works:
+-------------
+
+The USB (at least the USB UHCI) needs a frame list (4k), transfer
+descripor and queue headers which are all located in the main memory.
+The UHCI allocates every milisecond the PCI bus and reads the current
+frame pointer. This may cause to crash the OS during boot. So the USB
+_MUST_ be stopped during OS boot. This is the reason, why the USB is
+NOT automatically started during start-up. If someone needs the USB
+he has to start it and should therefore be aware that he had to stop
+it before booting the OS.
+
+For USB keyboards this can be done by a script which is automatically
+started after the U-Boot is up and running. To boot an OS with a an
+USB keyboard another script is necessary, which first disables the
+USB and then executes the boot command. If the boot command fails,
+the script can reenable the USB kbd.
+
+Common USB Commands:
+- usb start:
+- usb reset: (re)starts the USB. All USB devices will be
+ initialized and a device tree is build for them.
+- usb tree: shows all USB devices in a tree like display
+- usb info [dev]: shows all USB infos of the device dev, or of all
+ the devices
+- usb stop [f]: stops the USB. If f==1 the USB will also stop if
+ an USB keyboard is assigned as stdin. The stdin
+ is then switched to serial input.
+Storage USB Commands:
+- usb scan: scans the USB for storage devices.The USB must be
+ running for this command (usb start)
+- usb device [dev]: show or set current USB staorage device
+- usb part [dev]: print partition table of one or all USB storage
+ devices
+- usb read addr blk# cnt:
+ read `cnt' blocks starting at block `blk#'to
+ memory address `addr'
+- usbboot addr dev:part:
+ boot from USB device
+
+Config Switches:
+----------------
+CFG_CMD_USB enables basic USB support and the usb command
+CONFIG_USB_UHCI defines the lowlevel part.A lowlevel part must be defined if
+ using CFG_CMD_USB
+CONFIG_USB_KEYBOARD enables the USB Keyboard
+CONFIG_USB_STORAGE enables the USB storage devices