summaryrefslogtreecommitdiff
path: root/conf/machine/colibri-t30.conf
AgeCommit message (Collapse)Author
2017-10-05machines: compress the rootfs artefacts with xzMax Krummenacher
Change the compression method for the rootfs from bz2 to xz. This unifies the Toradex bsp with the same change done to NXP based machines when we added the Toradex Easy Installer. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2017-04-07machine configs: don't deploy the kernel in /bootMax Krummenacher
In our images this has been done during do_rootfs and friends, do it the oe-core way. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-01-11apalis-t30.conf/colibri-t30.conf: build uImage from within kernelbuildsystemMax Krummenacher
Unsetting KEEPUIMAGE requests that vmlinux is built and later manually packed into a uImage. The resulting uImage in morty now packeges a gz compressed kernel in favour of the uImage compression. Our U-Boot is not configured to boot such a uImage. So keep the default setting for KEEPUIMAGE. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-06-30machine conf: remove setting of MACHINE_GUI_CLASSMax Krummenacher
This is only used for choosing a custom logo size. Not needed in our use case. meta-openembedded/meta-oe/recipes-kernel/linux/linux.inc Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-11-03apalis/colibri_t20/t30: change default tune to thumb-2Marcel Ziswiler
Change DEFAULTTUNE in machine configurations to Thumb-2.
2015-06-16tegra: create tegra-base.inc machine configurationStefan Agner
Consolidate Tegra specific machine configuration in a common tegra-base.inc file.
2015-05-18machines: don't pin systemd version anymoreMax Krummenacher
Use systemd V2.18 from meta-angstrom. Issues with firmware loading and the 3.1.10 kernel for the tegra machines are fixed with a backport from oe-core.
2015-03-31mesa: remove egl, gles instead of using mesa-glMax Krummenacher
2014-10-30machines: use thumb2 with meta-angstromMax Krummenacher
Angstrom started using thumb2 on machines with armv7-a architectures. This commit removes our override to stay on arm instruction set, so if building our machines with the angstrom distribution you now get thumb2 builds.
2014-10-30apalis/colibri_t30: latest u-boot git migrated to cbootimage/tegrarcmMarcel Ziswiler
Use latest U-Boot from git. Migrate to using cbootimage and tegrarcm.
2014-10-06systemd: don't pull in systemd 216Max Krummenacher
meta-angstrom backported systemd 2.16 into daisy. Keep using 2.11 for now.
2014-08-04machine.conf: use arm instructions setMax Krummenacher
Angstrom default on armv7a would be thumb2, however there are some recipes around with arm assembler which fails.
2014-08-04machine.conf: xserver: make sure to use machine specificMax Krummenacher
If the package manager finds a version newer than the prefered-version that one gets installed. As we need a specific one for the tegras and for imx6 we change the 'epoch' to something very high.
2014-08-04machine.conf: unify MACHINE_FEATURESMax Krummenacher
unify the features between machines kernel26 is deprecated and unused apm does not make sense on ARM While at it remove some commented stuff
2014-08-04tegra: use xserver 1.14.4 recipeMax Krummenacher
2014-06-25machine tegra: prefer egl gles from toradex-nv-binariesraul
2014-04-01machines: Add PREFERRED_PROVIDER for mesa to be mesa-glMax Krummenacher
EGL, OpenGL ES1.1 and OpenGL ES2.0 provided in binary form.
2014-04-01machines: Add PREFERRED_PROVIDER for virtual/bootloaderMax Krummenacher
virtual/bootloader is a commonly used target. This patch adds it for meta-fsl-arm machines. Other BSP layers have this provider and when using a mutli-machine distro setup bitbake virtual/bootloader builds a wrong u-boot for fsl machines The patch was imported from the meta-arm-fsl git server (https://github.com/Freescale/meta-fsl-arm/commit/93b3d7dd7cdbbc0a49394cc32d335fb85fd2da74) and adapted to our machines.
2013-10-16machines: T30 and VF50 consitstently use NEON and hard floatMax Krummenacher
- Colibri T30 and Apalis T30 changed to NEON - Colibri VF50 changed to hard float This makes packages built for T30 incompatible with Colibri T20 (but Colibri T20 packages can still be used on T30)
2013-10-07xserver: upgrade Colibri T30 to V14Max Krummenacher
2013-09-22machine: define SOC-FAMILY, fix ARCH nameMax Krummenacher
2013-09-22machine: force x-server version 1.13.1Max Krummenacher
- the binary only x-server driver only supports API for 1.13 at the moment - remove a backup file
2013-01-29kernel: use the unified recipeMax Krummenacher
2012-11-19colibri-t30.conf:Max Krummenacher
- change to hard-float - u-boot entry point set to l4t R16 requirements - cleanup and harmonized with colibri-t20.conf
2012-06-03Initial commitMax Krummenacher
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-03 22:37:38 +0000