#include "tegra124.dtsi"
#include "tegra124-platforms/tegra124-pm374-gpio-default.dtsi"
#include "tegra124-platforms/tegra124-pm374-pinmux.dtsi"
#include "tegra124-platforms/tegra124-norrin-keys-pm374-0000-a00.dtsi"
#include "tegra124-platforms/tegra124-norrin-fixed-pm374-0000-a00.dtsi"
#include "tegra124-platforms/tegra124-norrin-pmic-pm374-0000-a00.dtsi"

/ {
	model = "NVIDIA Tegra124 Norrin";
	compatible = "nvidia,norrin", "nvidia,tegra124";
	nvidia,dtsfilename = __FILE__;
	#address-cells = <2>;
	#size-cells = <2>;

	chosen {
		bootargs = "tegraid=40.0.0.00.00 vmalloc=256M video=tegrafb console=ttyS0,115200n8 earlyprintk";
		linux,initrd-start = <0x85000000>;
		linux,initrd-end = <0x851bc400>;
	};

	aliases {
		gpio264 = &tca6416;
	};

	serial@70006000 {
		compatible = "nvidia,tegra114-hsuart";
		status = "okay";
	};

	serial@70006040 {
		compatible = "nvidia,tegra114-hsuart";
		status = "okay";
	};

	serial@70006200 {
		compatible = "nvidia,tegra114-hsuart";
		status = "okay";
	};

	i2c@7000c000 {

		tca6416: gpio@20 {
			compatible = "ti,tca6416";
			reg = <0x20>;
			interrupt-parent = <&gpio>;
			interrupts = <TEGRA_GPIO(Q, 5) 0x0>;

			#gpio-cells = <2>;
			gpio-controller;

			#interrupt-cells = <2>;
			interrupt-controller;
		};
	};

	i2c@7000d000 {
		nvidia,bit-banging-xfer-after-shutdown;
	};

	memory@0x80000000 {
		device_type = "memory";
		reg = <0x0 0x80000000 0x0 0x80000000>;
	};

	spi@7000d400 {
		status = "okay";
		spi-max-frequency = <25000000>;
	};

	spi@7000d800 {
		status = "okay";
		spi-max-frequency = <25000000>;
	};

	spi@7000da00 {
		status = "okay";
		spi-max-frequency = <25000000>;
	};

	pmc {
		status = "okay";
		nvidia,invert-interrupt;
		nvidia,suspend-mode = <0>;
		nvidia,cpu-pwr-good-time = <2000>;
		nvidia,cpu-pwr-off-time = <2000>;
		nvidia,core-pwr-good-time = <3845 3845>;
		nvidia,core-pwr-off-time = <2000>;
		nvidia,core-power-req-active-high;
		nvidia,sys-clock-req-active-high;
	};

	xusb@70090000 {
		/* nvidia,uses_external_pmic;
		nvidia,gpio_controls_muxed_ss_lanes; */
		nvidia,gpio_ss1_sata = <0>;
		nvidia,portmap = <0x703>; /* SSP0, SSP1 USB2P0, USB2P1, USBP2 */
		nvidia,ss_portmap = <0x20>; /* SSP0 on USB2P0, SSP1 on USB2P2 */
		nvidia,lane_owner = <6>; /* USB3P0 USB3P1 */
		nvidia,ulpicap = <0>; /* No ulpi support. can we remove */
		nvidia,supply_utmi_vbuses = "usb_vbus0", "usb_vbus1", "usb_vbus2";
		nvidia,supply_s3p3v = "hvdd_usb";
		nvidia,supply_s1p8v = "avdd_pll_utmip";
		nvidia,supply_vddio_hsic = "vddio_hsic";
		nvidia,supply_s1p05v = "avddio_usb";
		/* hsic config values in order defined in structure */
		nvidia,hsic0 = /bits/8 <0x1 0x1 0x8 0xa 0 0 1 0x22 0>;
		status = "okay";
	};
};