From eb8d060d4360b1bffc6b5ec9c5f511a24dd60c80 Mon Sep 17 00:00:00 2001 From: Philippe Schenker Date: Thu, 1 Sep 2022 12:01:51 +0200 Subject: arm64: dts: imx8mm-verdin: extend pmic voltages Currently, we limited the voltages from the PMIC very strictly. This causes an issue with one Toradex SKU that uses a consumer-grade chip that is capable of going up to 1.8GHz at 1.00V. Extend the ranges to min/max values of the SoC operating ranges (table 10) in the datasheet. Detailed explanation as follows: BUCK2: - As already described above, the SKU with the consumer-grade chip needs a voltage of at least 1.00V. 1.05V is chosen now as this is listed as the maximum. Both industrial and consumer-grade chips have an absolute maximum rating of 1.15V which makes it still safe to put 1.05V - Lower the regulator-min value to the smallest value allowed from the Quad-A53, 1.2GHz version of the SoC BUCK3: - This regulator is used for SoC input voltages VDD_GPU, VDD_VPU and VDD_DRAM. - Use the smallest value of these three inputs as the regulator-min - Use the largest value of these three inputs as the regulator-max LDO2: - This LDO is used for VDD_SNVS_0P8 SoC input voltage. As this has a single nominal input voltage just put this in the middle of 0.8V. Fixes: commit 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini") Signed-off-by: Philippe Schenker Signed-off-by: Marcel Ziswiler Upstream-Status: Submitted [https://lore.kernel.org/all/20220901100151.1378709-5-marcel@ziswiler.com/] --- arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index 3b942b441f7f..494b5de1a74a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -387,8 +387,8 @@ nxp,dvs-standby-voltage = <850000>; regulator-always-on; regulator-boot-on; - regulator-max-microvolt = <950000>; - regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <805000>; regulator-name = "On-module +VDD_ARM (BUCK2)"; regulator-ramp-delay = <3125>; }; @@ -396,8 +396,8 @@ reg_vdd_dram: BUCK3 { regulator-always-on; regulator-boot-on; - regulator-max-microvolt = <950000>; - regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <805000>; regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)"; }; @@ -436,7 +436,7 @@ reg_vdd_snvs: LDO2 { regulator-always-on; regulator-boot-on; - regulator-max-microvolt = <900000>; + regulator-max-microvolt = <800000>; regulator-min-microvolt = <800000>; regulator-name = "On-module +V0.8_SNVS (LDO2)"; }; -- cgit v1.2.3