From 56a699cfa9247e11d6e5d3237f22b74b17ecf4fb Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Fri, 18 Feb 2022 16:27:06 +0100 Subject: usb: dwc3: imx8mp: Add support for setting SOC specific flags The i.MX8MP glue layer has support for the following flags: * over-current polarity * PWR pad polarity * controlling PPC flag in HCCPARAMS register * permanent port attach for usb2 & usb3 port Allow setting these flags by supporting specific flags in the glue node. In order to get this to work an additional IORESOURCE_MEM and clock is necessary. For backward compatibility this is purely optional. Signed-off-by: Alexander Stein Link: https://lore.kernel.org/r/20220218152707.2198357-4-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman Upstream-status: Backport [9d52107185b646d449b682e10e95e6b3037b79cf] --- drivers/usb/dwc3/dwc3-imx8mp.c | 63 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c b/drivers/usb/dwc3/dwc3-imx8mp.c index 9022823cf2e1..cba3b79f7b40 100644 --- a/drivers/usb/dwc3/dwc3-imx8mp.c +++ b/drivers/usb/dwc3/dwc3-imx8mp.c @@ -37,10 +37,22 @@ #define USB_WAKEUP_EN_MASK GENMASK(5, 0) +/* USB glue registers */ +#define USB_CTRL0 0x00 +#define USB_CTRL1 0x04 + +#define USB_CTRL0_PORTPWR_EN BIT(12) /* 1 - PPC enabled (default) */ +#define USB_CTRL0_USB3_FIXED BIT(22) /* 1 - USB3 permanent attached */ +#define USB_CTRL0_USB2_FIXED BIT(23) /* 1 - USB2 permanent attached */ + +#define USB_CTRL1_OC_POLARITY BIT(16) /* 0 - HIGH / 1 - LOW */ +#define USB_CTRL1_PWR_POLARITY BIT(17) /* 0 - HIGH / 1 - LOW */ + struct dwc3_imx8mp { struct device *dev; struct platform_device *dwc3; void __iomem *hsio_blk_base; + void __iomem *glue_base; struct clk *hsio_clk; struct clk *suspend_clk; int irq; @@ -48,6 +60,42 @@ struct dwc3_imx8mp { bool wakeup_pending; }; +static void imx8mp_configure_glue(struct dwc3_imx8mp *dwc3_imx) +{ + struct device *dev = dwc3_imx->dev; + u32 value; + + if (!dwc3_imx->glue_base) + return; + + value = readl(dwc3_imx->glue_base + USB_CTRL0); + + if (device_property_read_bool(dev, "fsl,permanently-attached")) + value |= (USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED); + else + value &= ~(USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED); + + if (device_property_read_bool(dev, "fsl,disable-port-power-control")) + value &= ~(USB_CTRL0_PORTPWR_EN); + else + value |= USB_CTRL0_PORTPWR_EN; + + writel(value, dwc3_imx->glue_base + USB_CTRL0); + + value = readl(dwc3_imx->glue_base + USB_CTRL1); + if (device_property_read_bool(dev, "fsl,over-current-active-low")) + value |= USB_CTRL1_OC_POLARITY; + else + value &= ~USB_CTRL1_OC_POLARITY; + + if (device_property_read_bool(dev, "fsl,power-active-low")) + value |= USB_CTRL1_PWR_POLARITY; + else + value &= ~USB_CTRL1_PWR_POLARITY; + + writel(value, dwc3_imx->glue_base + USB_CTRL1); +} + static void dwc3_imx8mp_wakeup_enable(struct dwc3_imx8mp *dwc3_imx) { struct dwc3 *dwc3 = platform_get_drvdata(dwc3_imx->dwc3); @@ -141,6 +189,7 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *dwc3_np, *node = dev->of_node; struct dwc3_imx8mp *dwc3_imx; + struct resource *res; int err, irq; if (!node) { @@ -160,6 +209,15 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev) if (IS_ERR(dwc3_imx->hsio_blk_base)) return PTR_ERR(dwc3_imx->hsio_blk_base); + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_warn(dev, "Base address for glue layer missing. Continuing without, some features are missing though."); + } else { + dwc3_imx->glue_base = devm_ioremap_resource(dev, res); + if (IS_ERR(dwc3_imx->glue_base)) + return PTR_ERR(dwc3_imx->glue_base); + } + request_bus_freq(BUS_FREQ_HIGH); dwc3_imx->hsio_clk = devm_clk_get(dev, "hsio"); if (IS_ERR(dwc3_imx->hsio_clk)) { @@ -194,6 +252,8 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev) } dwc3_imx->irq = irq; + imx8mp_configure_glue(dwc3_imx); + pm_runtime_set_active(dev); pm_runtime_enable(dev); err = pm_runtime_get_sync(dev); @@ -298,6 +358,9 @@ static int __maybe_unused dwc3_imx8mp_resume(struct dwc3_imx8mp *dwc3_imx, dwc3_imx8mp_wakeup_disable(dwc3_imx); dwc3_imx->pm_suspended = false; + /* Upon power loss any previous configuration is lost, restore it */ + imx8mp_configure_glue(dwc3_imx); + if (dwc3_imx->wakeup_pending) { dwc3_imx->wakeup_pending = false; if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE) { -- cgit v1.2.3