From 5facb097137e7509a1b73448fe20226a4fbfe8cb Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 17 Sep 2010 17:24:10 +0200 Subject: hwmon: (lis3lv02d) Prevent NULL pointer dereference If CONFIG_PM was selected and lis3lv02d_platform_data was NULL, the kernel will be panic when halt command run. Reported-by: Yusuke Goda Signed-off-by: Kuninori Morimoto Acked-by: Samu Onkalo Sigend-off-by: Jean Delvare --- drivers/hwmon/lis3lv02d_i2c.c | 4 ++-- drivers/hwmon/lis3lv02d_spi.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c index dc1f5402c1d7..8e5933b72d19 100644 --- a/drivers/hwmon/lis3lv02d_i2c.c +++ b/drivers/hwmon/lis3lv02d_i2c.c @@ -121,7 +121,7 @@ static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg) { struct lis3lv02d *lis3 = i2c_get_clientdata(client); - if (!lis3->pdata->wakeup_flags) + if (!lis3->pdata || !lis3->pdata->wakeup_flags) lis3lv02d_poweroff(lis3); return 0; } @@ -130,7 +130,7 @@ static int lis3lv02d_i2c_resume(struct i2c_client *client) { struct lis3lv02d *lis3 = i2c_get_clientdata(client); - if (!lis3->pdata->wakeup_flags) + if (!lis3->pdata || !lis3->pdata->wakeup_flags) lis3lv02d_poweron(lis3); return 0; } diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c index 82b16808a274..b9be5e3a22b3 100644 --- a/drivers/hwmon/lis3lv02d_spi.c +++ b/drivers/hwmon/lis3lv02d_spi.c @@ -92,7 +92,7 @@ static int lis3lv02d_spi_suspend(struct spi_device *spi, pm_message_t mesg) { struct lis3lv02d *lis3 = spi_get_drvdata(spi); - if (!lis3->pdata->wakeup_flags) + if (!lis3->pdata || !lis3->pdata->wakeup_flags) lis3lv02d_poweroff(&lis3_dev); return 0; @@ -102,7 +102,7 @@ static int lis3lv02d_spi_resume(struct spi_device *spi) { struct lis3lv02d *lis3 = spi_get_drvdata(spi); - if (!lis3->pdata->wakeup_flags) + if (!lis3->pdata || !lis3->pdata->wakeup_flags) lis3lv02d_poweron(lis3); return 0; -- cgit v1.2.3 From 9e012c1acc1fd617a708c00ff1fdaa847f9faf67 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 17 Sep 2010 17:24:11 +0200 Subject: hwmon: New subsystem maintainers Guenter Roeck volunteered to adopt the hwmon subsystem as long as he wasn't the only maintainer. As this was also my own condition, we can add the two of us as co-maintainers of the hwmon subsystem. Signed-off-by: Jean Delvare Acked-by: Guenter Roeck --- MAINTAINERS | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index e7c528ff1013..8540dea232af 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2657,9 +2657,12 @@ S: Maintained F: drivers/media/video/gspca/ HARDWARE MONITORING +M: Jean Delvare +M: Guenter Roeck L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.org/ -S: Orphan +T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/ +S: Maintained F: Documentation/hwmon/ F: drivers/hwmon/ F: include/linux/hwmon*.h -- cgit v1.2.3 From 96f3640894012be7dd15a384566bfdc18297bc6c Mon Sep 17 00:00:00 2001 From: Guillem Jover Date: Fri, 17 Sep 2010 17:24:11 +0200 Subject: hwmon: (f75375s) Shift control mode to the correct bit position The spec notes that fan0 and fan1 control mode bits are located in bits 7-6 and 5-4 respectively, but the FAN_CTRL_MODE macro was making the bits shift by 5 instead of by 4. Signed-off-by: Guillem Jover Cc: Riku Voipio Cc: stable@kernel.org Signed-off-by: Jean Delvare --- drivers/hwmon/f75375s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index 0f58ecc5334d..e5828c009d91 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -79,7 +79,7 @@ enum chips { f75373, f75375 }; #define F75375_REG_PWM2_DROP_DUTY 0x6C #define FAN_CTRL_LINEAR(nr) (4 + nr) -#define FAN_CTRL_MODE(nr) (5 + ((nr) * 2)) +#define FAN_CTRL_MODE(nr) (4 + ((nr) * 2)) /* * Data structures and manipulation thereof -- cgit v1.2.3 From c3b327d60bbba3f5ff8fd87d1efc0e95eb6c121b Mon Sep 17 00:00:00 2001 From: Guillem Jover Date: Fri, 17 Sep 2010 17:24:12 +0200 Subject: hwmon: (f75375s) Do not overwrite values read from registers All bits in the values read from registers to be used for the next write were getting overwritten, avoid doing so to not mess with the current configuration. Signed-off-by: Guillem Jover Cc: Riku Voipio Cc: stable@kernel.org Signed-off-by: Jean Delvare --- drivers/hwmon/f75375s.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index e5828c009d91..9638d58f99fd 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -298,7 +298,7 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) return -EINVAL; fanmode = f75375_read8(client, F75375_REG_FAN_TIMER); - fanmode = ~(3 << FAN_CTRL_MODE(nr)); + fanmode &= ~(3 << FAN_CTRL_MODE(nr)); switch (val) { case 0: /* Full speed */ @@ -350,7 +350,7 @@ static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); conf = f75375_read8(client, F75375_REG_CONFIG1); - conf = ~(1 << FAN_CTRL_LINEAR(nr)); + conf &= ~(1 << FAN_CTRL_LINEAR(nr)); if (val == 0) conf |= (1 << FAN_CTRL_LINEAR(nr)) ; -- cgit v1.2.3 From f17c811d1433aa1966f9c5a744841427e9a97ecf Mon Sep 17 00:00:00 2001 From: Yong Wang Date: Fri, 17 Sep 2010 17:24:12 +0200 Subject: hwmon: (emc1403) Remove unnecessary hwmon_device_unregister It is unnecessary and wrong to call hwmon_device_unregister in error handling before hwmon_device_register is called. Signed-off-by: Yong Wang Reviewed-by: Guenter Roeck Cc: stable@kernel.org Signed-off-by: Jean Delvare --- drivers/hwmon/emc1403.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c index 5b58b20dead1..8dee3f38fdfb 100644 --- a/drivers/hwmon/emc1403.c +++ b/drivers/hwmon/emc1403.c @@ -308,7 +308,6 @@ static int emc1403_probe(struct i2c_client *client, res = sysfs_create_group(&client->dev.kobj, &m_thermal_gr); if (res) { dev_warn(&client->dev, "create group failed\n"); - hwmon_device_unregister(data->hwmon_dev); goto thermal_error1; } data->hwmon_dev = hwmon_device_register(&client->dev); -- cgit v1.2.3 From 022b75a3df2b5aeeb70c5d51bc1fe55722fdd759 Mon Sep 17 00:00:00 2001 From: Jonas Jonsson Date: Fri, 17 Sep 2010 17:24:13 +0200 Subject: hwmon: (w83627ehf) Use proper exit sequence According to the datasheet for Winbond W83627DHG the proper way to exit the Extended Function Mode is to write 0xaa to the EFER(0x2e or 0x4e). Signed-off-by: Jonas Jonsson Signed-off-by: Jean Delvare --- drivers/hwmon/w83627ehf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index e96e69dd36fb..072c58008a63 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -127,6 +127,7 @@ superio_enter(int ioreg) static inline void superio_exit(int ioreg) { + outb(0xaa, ioreg); outb(0x02, ioreg); outb(0x02, ioreg + 1); } -- cgit v1.2.3 From a51b9944a1aaca34c9061d3973663fee54e9d1c1 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 17 Sep 2010 17:24:14 +0200 Subject: hwmon: (adm1031) Replace update_rate sysfs attribute with update_interval The attribute reflects an interval, not a rate. Signed-off-by: Guenter Roeck Acked-by: Ira W. Snyder Signed-off-by: Jean Delvare --- Documentation/hwmon/sysfs-interface | 7 +++--- drivers/hwmon/adm1031.c | 43 +++++++++++++++++++++---------------- 2 files changed, 27 insertions(+), 23 deletions(-) diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index ff45d1f837c8..48ceabedf55d 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -91,12 +91,11 @@ name The chip name. I2C devices get this attribute created automatically. RO -update_rate The rate at which the chip will update readings. +update_interval The interval at which the chip will update readings. Unit: millisecond RW - Some devices have a variable update rate. This attribute - can be used to change the update rate to the desired - frequency. + Some devices have a variable update rate or interval. + This attribute can be used to change it to the desired value. ************ diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 15c1a9616af3..0683e6be662c 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -79,7 +79,7 @@ struct adm1031_data { int chip_type; char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ - unsigned int update_rate; /* In milliseconds */ + unsigned int update_interval; /* In milliseconds */ /* The chan_select_table contains the possible configurations for * auto fan control. */ @@ -743,23 +743,23 @@ static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 12); static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13); static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14); -/* Update Rate */ -static const unsigned int update_rates[] = { +/* Update Interval */ +static const unsigned int update_intervals[] = { 16000, 8000, 4000, 2000, 1000, 500, 250, 125, }; -static ssize_t show_update_rate(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t show_update_interval(struct device *dev, + struct device_attribute *attr, char *buf) { struct i2c_client *client = to_i2c_client(dev); struct adm1031_data *data = i2c_get_clientdata(client); - return sprintf(buf, "%u\n", data->update_rate); + return sprintf(buf, "%u\n", data->update_interval); } -static ssize_t set_update_rate(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t set_update_interval(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct adm1031_data *data = i2c_get_clientdata(client); @@ -771,12 +771,15 @@ static ssize_t set_update_rate(struct device *dev, if (err) return err; - /* find the nearest update rate from the table */ - for (i = 0; i < ARRAY_SIZE(update_rates) - 1; i++) { - if (val >= update_rates[i]) + /* + * Find the nearest update interval from the table. + * Use it to determine the matching update rate. + */ + for (i = 0; i < ARRAY_SIZE(update_intervals) - 1; i++) { + if (val >= update_intervals[i]) break; } - /* if not found, we point to the last entry (lowest update rate) */ + /* if not found, we point to the last entry (lowest update interval) */ /* set the new update rate while preserving other settings */ reg = adm1031_read_value(client, ADM1031_REG_FAN_FILTER); @@ -785,14 +788,14 @@ static ssize_t set_update_rate(struct device *dev, adm1031_write_value(client, ADM1031_REG_FAN_FILTER, reg); mutex_lock(&data->update_lock); - data->update_rate = update_rates[i]; + data->update_interval = update_intervals[i]; mutex_unlock(&data->update_lock); return count; } -static DEVICE_ATTR(update_rate, S_IRUGO | S_IWUSR, show_update_rate, - set_update_rate); +static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval, + set_update_interval); static struct attribute *adm1031_attributes[] = { &sensor_dev_attr_fan1_input.dev_attr.attr, @@ -830,7 +833,7 @@ static struct attribute *adm1031_attributes[] = { &sensor_dev_attr_auto_fan1_min_pwm.dev_attr.attr, - &dev_attr_update_rate.attr, + &dev_attr_update_interval.attr, &dev_attr_alarms.attr, NULL @@ -981,7 +984,8 @@ static void adm1031_init_client(struct i2c_client *client) mask = ADM1031_UPDATE_RATE_MASK; read_val = adm1031_read_value(client, ADM1031_REG_FAN_FILTER); i = (read_val & mask) >> ADM1031_UPDATE_RATE_SHIFT; - data->update_rate = update_rates[i]; + /* Save it as update interval */ + data->update_interval = update_intervals[i]; } static struct adm1031_data *adm1031_update_device(struct device *dev) @@ -993,7 +997,8 @@ static struct adm1031_data *adm1031_update_device(struct device *dev) mutex_lock(&data->update_lock); - next_update = data->last_updated + msecs_to_jiffies(data->update_rate); + next_update = data->last_updated + + msecs_to_jiffies(data->update_interval); if (time_after(jiffies, next_update) || !data->valid) { dev_dbg(&client->dev, "Starting adm1031 update\n"); -- cgit v1.2.3 From bc482bf0ce918b39a1fa60b9341f1add9318d833 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 17 Sep 2010 17:24:15 +0200 Subject: hwmon: (lm95241) Replace rate sysfs attribute with update_interval update_interval is the matching attribute defined in the hwmon sysfs ABI. Use it. Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare --- drivers/hwmon/lm95241.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c index 94741d42112d..464340f25496 100644 --- a/drivers/hwmon/lm95241.c +++ b/drivers/hwmon/lm95241.c @@ -91,7 +91,7 @@ static struct lm95241_data *lm95241_update_device(struct device *dev); struct lm95241_data { struct device *hwmon_dev; struct mutex update_lock; - unsigned long last_updated, rate; /* in jiffies */ + unsigned long last_updated, interval; /* in jiffies */ char valid; /* zero until following fields are valid */ /* registers values */ u8 local_h, local_l; /* local */ @@ -114,23 +114,23 @@ show_temp(local); show_temp(remote1); show_temp(remote2); -static ssize_t show_rate(struct device *dev, struct device_attribute *attr, +static ssize_t show_interval(struct device *dev, struct device_attribute *attr, char *buf) { struct lm95241_data *data = lm95241_update_device(dev); - snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->rate / HZ); + snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->interval / HZ); return strlen(buf); } -static ssize_t set_rate(struct device *dev, struct device_attribute *attr, +static ssize_t set_interval(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct lm95241_data *data = i2c_get_clientdata(client); - strict_strtol(buf, 10, &data->rate); - data->rate = data->rate * HZ / 1000; + strict_strtol(buf, 10, &data->interval); + data->interval = data->interval * HZ / 1000; return count; } @@ -286,7 +286,8 @@ static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min1, set_min1); static DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min2, set_min2); static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max1, set_max1); static DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max2, set_max2); -static DEVICE_ATTR(rate, S_IWUSR | S_IRUGO, show_rate, set_rate); +static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, + set_interval); static struct attribute *lm95241_attributes[] = { &dev_attr_temp1_input.attr, @@ -298,7 +299,7 @@ static struct attribute *lm95241_attributes[] = { &dev_attr_temp3_min.attr, &dev_attr_temp2_max.attr, &dev_attr_temp3_max.attr, - &dev_attr_rate.attr, + &dev_attr_update_interval.attr, NULL }; @@ -376,7 +377,7 @@ static void lm95241_init_client(struct i2c_client *client) { struct lm95241_data *data = i2c_get_clientdata(client); - data->rate = HZ; /* 1 sec default */ + data->interval = HZ; /* 1 sec default */ data->valid = 0; data->config = CFG_CR0076; data->model = 0; @@ -410,7 +411,7 @@ static struct lm95241_data *lm95241_update_device(struct device *dev) mutex_lock(&data->update_lock); - if (time_after(jiffies, data->last_updated + data->rate) || + if (time_after(jiffies, data->last_updated + data->interval) || !data->valid) { dev_dbg(&client->dev, "Updating lm95241 data.\n"); data->local_h = -- cgit v1.2.3