summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2017-10-12ALSA: usx2y: Suppress kernel warning at page allocation failuresTakashi Iwai
commit 7682e399485fe19622b6fd82510b1f4551e48a25 upstream. The usx2y driver allocates the stream read/write buffers in continuous pages depending on the stream setup, and this may spew the kernel warning messages with a stack trace like: WARNING: CPU: 1 PID: 1846 at mm/page_alloc.c:3883 __alloc_pages_slowpath+0x1ef2/0x2d70 Modules linked in: CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted .... It may confuse user as if it were any serious error, although this is no fatal error and the driver handles the error case gracefully. Since the driver has already some sanity check of the given size (128 and 256 pages), it can't pass any crazy value. So it's merely page fragmentation. This patch adds __GFP_NOWARN to each caller for suppressing such kernel warnings. The original issue was spotted by syzkaller. Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12Revert "ALSA: echoaudio: purge contradictions between dimension matrix ↵Takashi Sakamoto
members and total number of members" commit 51db452df07bb4c5754b73789253ba21681d9dc2 upstream. This reverts commit 275353bb684e to fix a regression which can abort 'alsactl' program in alsa-utils due to assertion in alsa-lib. alsactl: control.c:2513: snd_ctl_elem_value_get_integer: Assertion `idx < sizeof(obj->value.integer.value) / sizeof(obj->value.integer.value[0])' failed. alsactl: control.c:2976: snd_ctl_elem_value_get_integer: Assertion `idx < ARRAY_SIZE(obj->value.integer.value)' failed. This commit is a band-aid. In a point of usage of ALSA control interface, the drivers still bring an issue that they prevent userspace applications to have a consistent way to parse each levels of the dimension information via ALSA control interface. Let me investigate this issue. Current implementation of the drivers have three control element sets with dimension information: * 'Monitor Mixer Volume' (type: integer) * 'VMixer Volume' (type: integer) * 'VU-meters' (type: boolean) Although the number of elements named as 'Monitor Mixer Volume' differs depending on drivers in this group, it can be calculated by macros defined by each driver (= (BX_NUM - BX_ANALOG_IN) * BX_ANALOG_IN). Each of the elements has one member for value and has dimension information with 2 levels (= BX_ANALOG_IN * (BX_NUM - BX_ANALOG_IN)). For these elements, userspace applications are expected to handle the dimension information so that all of the elements construct a matrix where the number of rows and columns are represented by the dimension information. The same way is applied to elements named as 'VMixer Volume'. The number of these elements can also be calculated by macros defined by each drivers (= PX_ANALOG_IN * BX_ANALOG_IN). Each of the element has one member for value and has dimension information with 2 levels (= BX_ANALOG_IN * PX_ANALOG_IN). All of the elements construct a matrix with the dimension information. An element named as 'VU-meters' gets a different way in a point of dimension information. The element includes 96 members for value. The element has dimension information with 3 levels (= 3 or 2 * 16 * 2). For this element, userspace applications are expected to handle the dimension information so that all of the members for value construct a matrix where the number of rows and columns are represented by the dimension information. This is different from the way for the former. As a summary, the drivers were not designed to produce a consistent way to parse the dimension information. This makes it hard for general userspace applications such as amixer to parse the information by a consistent way, and actually no userspace applications except for 'echomixer' utilize the dimension information. Additionally, no drivers excluding this group use the information. The reverted commit was written based on the latter way. A commit 860c1994a70a ('ALSA: control: add dimension validator for userspace elements') is written based on the latter way, too. The patch should be reconsider too in the same time to re-define a consistent way to parse the dimension information. Reported-by: Mark Hills <mark@xwax.org> Reported-by: S. Christian Collins <s.chriscollins@gmail.com> Fixes: 275353bb684e ('ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12ALSA: compress: Remove unused variableGuneshwor Singh
commit a931b9ce93841a5b66b709ba5a244276e345e63b upstream. Commit 04c5d5a430fc ("ALSA: compress: Embed struct device") removed the statement that used 'str' but didn't remove the variable itself. So remove it. [Adding stable to Cc since pr_debug() may refer to the uninitialized buffer -- tiwai] Fixes: 04c5d5a430fc ("ALSA: compress: Embed struct device") Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12ALSA: usb-audio: Check out-of-bounds access by corrupted buffer descriptorTakashi Iwai
commit bfc81a8bc18e3c4ba0cbaa7666ff76be2f998991 upstream. When a USB-audio device receives a maliciously adjusted or corrupted buffer descriptor, the USB-audio driver may access an out-of-bounce value at its parser. This was detected by syzkaller, something like: BUG: KASAN: slab-out-of-bounds in usb_audio_probe+0x27b2/0x2ab0 Read of size 1 at addr ffff88006b83a9e8 by task kworker/0:1/24 CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 #224 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 snd_usb_create_streams sound/usb/card.c:248 usb_audio_probe+0x27b2/0x2ab0 sound/usb/card.c:605 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 This patch adds the checks of out-of-bounce accesses at appropriate places and bails out when it goes out of the given buffer. Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08ALSA: au88x0: avoid theoretical uninitialized accessArnd Bergmann
commit 13f99ebdd602ebdafb909e15ec6ffb1e34690167 upstream. The latest gcc-7.0.1 snapshot points out that we if nr_ch is zero, we never initialize some variables: sound/pci/au88x0/au88x0_core.c: In function 'vortex_adb_allocroute': sound/pci/au88x0/au88x0_core.c:2304:68: error: 'mix[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized] sound/pci/au88x0/au88x0_core.c:2305:58: error: 'src[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized] I assume this can never happen in practice, but adding a check here doesn't hurt either and avoids the warning. The code has been unchanged since the start of git history. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08ASoC: rt5660: remove double constNicholas Mc Guire
commit 4281fcc02ed9f902dfa52d3635ac7f04b1a7341f upstream. Drop the const qualifier as it is being added by SOC_ENUM_DOUBLE_DECL() already which is called by SOC_ENUM_SINGLE_DECL() here. Fixes: commit 2b26dd4c1fc5 ("ASoC: rt5660: add rt5660 codec driver") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08ASoC: rt5659: drop double constNicholas Mc Guire
commit eae39b5f4269260d5d8b35133ba0f4c5e2895b71 upstream. Drop the const qualifier as it is being added by SOC_ENUM_DOUBLE_DECL() already which is called by SOC_ENUM_SINGLE_DECL() as well as the double const by calls to SOC_VALUE_ENUM_SINGLE_DECL() via SOC_VALUE_ENUM_DOUBLE_DECL). Fixes: commit d3cb2de2479b ("ASoC: rt5659: add rt5659 codec driver") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08ASoC: rt5514: fix gcc-7 warningArnd Bergmann
commit 03ba791df98d15d07ea74075122af71e35c7611c upstream. gcc-7 warns that there is a duplicate 'const' specifier in some variables that are declared using the SOC_ENUM_SINGLE_DECL macro: sound/soc/codecs/rt5514.c:398:14: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const SOC_ENUM_SINGLE_DECL( sound/soc/codecs/rt5514.c:405:14: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const SOC_ENUM_SINGLE_DECL( This removes one to fix the warning. Fixes: 4a6180ea7399 ("ASoC: rt5514: add rt5514 codec driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08ASoC: wm_adsp: Return an error on write to a disabled volatile controlCharles Keepax
[ Upstream commit 67430a39ca7a6af28aade5acb92d43ee257c1014 ] Volatile controls should only be accessed when the firmware is active, currently however writes to these controls will succeed, but the data will be lost, if the firmware is powered down. Update this behaviour such that an error is returned the same as it is for reads. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08ASoC: dapm: fix some pointer error handlingLinus Walleij
[ Upstream commit 639467c8f26d834c934215e8b59129ce442475fe ] commit 66feeec9322132689d42723df2537d60f96f8e44 "RFC: ASoC: dapm: handle probe deferrals" forgot a to update some two sites where the call was used. The static codechecks quickly found them. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 66feeec93221 ("RFC: ASoC: dapm: handle probe deferrals") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08ASoC: dapm: handle probe deferralsLinus Walleij
[ Upstream commit 37e1df8c95e2c8a57c77eafc097648f6e40a60ff ] This starts to handle probe deferrals on regulators and clocks on the ASoC DAPM. I came to this patch after audio stopped working on Ux500 ages ago and I finally looked into it to see what is wrong. I had messages like this in the console since a while back: ab8500-codec.0: ASoC: Failed to request audioclk: -517 ab8500-codec.0: ASoC: Failed to create DAPM control audioclk ab8500-codec.0: Failed to create new controls -12 snd-soc-mop500.0: ASoC: failed to instantiate card -12 snd-soc-mop500.0: Error: snd_soc_register_card failed (-12)! snd-soc-mop500: probe of snd-soc-mop500.0 failed with error -12 Apparently because the widget table for the codec looks like this (sound/soc/codecs/ab8500-codec.c): static const struct snd_soc_dapm_widget ab8500_dapm_widgets[] = { /* Clocks */ SND_SOC_DAPM_CLOCK_SUPPLY("audioclk"), /* Regulators */ SND_SOC_DAPM_REGULATOR_SUPPLY("V-AUD", 0, 0), SND_SOC_DAPM_REGULATOR_SUPPLY("V-AMIC1", 0, 0), SND_SOC_DAPM_REGULATOR_SUPPLY("V-AMIC2", 0, 0), SND_SOC_DAPM_REGULATOR_SUPPLY("V-DMIC", 0, 0), So when we call snd_soc_register_codec() and any of these widgets get a deferred probe we do not get an -EPROBE_DEFER (-517) back as we should and instead we just fail. Apparently the code assumes that clocks and regulators must be available at this point and not defer. After this patch it rather looks like this: ab8500-codec.0: Failed to create new controls -517 snd-soc-mop500.0: ASoC: failed to instantiate card -517 snd-soc-mop500.0: Error: snd_soc_register_card failed (-517)! (...) abx500-clk.0: registered clocks for ab850x snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok I'm pretty happy about the patch as it it, but I'm a bit uncertain on how to proceed: there are a lot of users of the external functions snd_soc_dapm_new_control() (111 sites) and that will now return an occassional error pointer, which is not handled in the calling sites. I want an indication from the maintainers whether I should just go in and augment all these call sites, or if deferred probe is frowned upon when it leads to this much overhead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13ALSA: msnd: Optimize / harden DSP and MIDI loopsTakashi Iwai
commit 20e2b791796bd68816fa115f12be5320de2b8021 upstream. The ISA msnd drivers have loops fetching the ring-buffer head, tail and size values inside the loops. Such codes are inefficient and fragile. This patch optimizes it, and also adds the sanity check to avoid the endless loops. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196131 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196133 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: grygorii tertychnyi <gtertych@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30ALSA: firewire: fix NULL pointer dereference when releasing uninitialized ↵Takashi Sakamoto
data of iso-resource commit 0c264af7be2013266c5b4c644f3f366399ee490a upstream. When calling 'iso_resource_free()' for uninitialized data, this function causes NULL pointer dereference due to its 'unit' member. This occurs when unplugging audio and music units on IEEE 1394 bus at failure of card registration. This commit fixes the bug. The bug exists since kernel v4.5. Fixes: 324540c4e05c ('ALSA: fireface: postpone sound card registration') at v4.12 Fixes: 8865a31e0fd8 ('ALSA: firewire-motu: postpone sound card registration') at v4.12 Fixes: b610386c8afb ('ALSA: firewire-tascam: deleyed registration of sound card') at v4.7 Fixes: 86c8dd7f4da3 ('ALSA: firewire-digi00x: delayed registration of sound card') at v4.7 Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') at v4.7 Fixes: 7d3c1d5901aa ('ALSA: fireworks: delayed registration of sound card') at v4.7 Fixes: 04a2c73c97eb ('ALSA: bebob: delayed registration of sound card') at v4.7 Fixes: b59fb1900b4f ('ALSA: dice: postpone card registration') at v4.5 Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30ALSA: hda - Add stereo mic quirk for Lenovo G50-70 (17aa:3978)Takashi Iwai
commit bbba6f9d3da357bbabc6fda81e99ff5584500e76 upstream. Lenovo G50-70 (17aa:3978) with Conexant codec chip requires the similar workaround for the inverted stereo dmic like other Lenovo models. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1020657 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30ALSA: core: Fix unexpected error at replacing user TLVTakashi Iwai
commit 88c54cdf61f508ebcf8da2d819f5dfc03e954d1d upstream. When user tries to replace the user-defined control TLV, the kernel checks the change of its content via memcmp(). The problem is that the kernel passes the return value from memcmp() as is. memcmp() gives a non-zero negative value depending on the comparison result, and this shall be recognized as an error code. The patch covers that corner-case, return 1 properly for the changed TLV. Fixes: 8aa9b586e420 ("[ALSA] Control API - more robust TLV implementation") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30ALSA: usb-audio: Add delay quirk for H650e/Jabra 550a USB headsetsJoakim Tjernlund
commit 07b3b5e9ed807a0d2077319b8e43a42e941db818 upstream. These headsets reports a lot of: cannot set freq 44100 to ep 0x81 and need a small delay between sample rate settings, just like Zoom R16/24. Add both headsets to the Zoom R16/24 quirk for a 1 ms delay between control msgs. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-24ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devicesTakashi Iwai
commit 0f174b3525a43bd51f9397394763925e0ebe7bc7 upstream. C-Media devices (at least some models) mute the playback stream when volumes are set to the minimum value. But this isn't informed via TLV and the user-space, typically PulseAudio, gets confused as if it's still played in a low volume. This patch adds the new flag, min_mute, to struct usb_mixer_elem_info for indicating that the mixer element is with the minimum-mute volume. This flag is set for known C-Media devices in snd_usb_mixer_fu_apply_quirk() in turn. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196669 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-24ALSA: usb-audio: Apply sample rate quirk to Sennheiser headsetTakashi Iwai
commit a8e800fe0f68bc28ce309914f47e432742b865ed upstream. A Senheisser headset requires the typical sample-rate quirk for avoiding spurious errors from inquiring the current sample rate like: usb 1-1: 2:1: cannot get freq at ep 0x4 usb 1-1: 3:1: cannot get freq at ep 0x83 The USB ID 1395:740a has to be added to the entries in snd_usb_get_sample_rate_quirk(). Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1052580 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-24ALSA: seq: 2nd attempt at fixing race creating a queueDaniel Mentz
commit 7e1d90f60a0d501c8503e636942ca704a454d910 upstream. commit 4842e98f26dd80be3623c4714a244ba52ea096a8 ("ALSA: seq: Fix race at creating a queue") attempted to fix a race reported by syzkaller. That fix has been described as follows: " When a sequencer queue is created in snd_seq_queue_alloc(),it adds the new queue element to the public list before referencing it. Thus the queue might be deleted before the call of snd_seq_queue_use(), and it results in the use-after-free error, as spotted by syzkaller. The fix is to reference the queue object at the right time. " Even with that fix in place, syzkaller reported a use-after-free error. It specifically pointed to the last instruction "return q->queue" in snd_seq_queue_alloc(). The pointer q is being used after kfree() has been called on it. It turned out that there is still a small window where a race can happen. The window opens at snd_seq_ioctl_create_queue()->snd_seq_queue_alloc()->queue_list_add() and closes at snd_seq_ioctl_create_queue()->queueptr()->snd_use_lock_use(). Between these two calls, a different thread could delete the queue and possibly re-create a different queue in the same location in queue_list. This change prevents this situation by calling snd_use_lock_use() from snd_seq_queue_alloc() prior to calling queue_list_add(). It is then the caller's responsibility to call snd_use_lock_free(&q->use_lock). Fixes: 4842e98f26dd ("ALSA: seq: Fix race at creating a queue") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Daniel Mentz <danielmentz@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-11ASoC: rt5645: set sel_i2s_pre_div1 to 2Bard Liao
[ Upstream commit 02c5c03283c52157d336abf5e44ffcda10579fbf ] The i2s clock pre-divider 1 is used for both i2s1 and sysclk. The i2s1 is usually used for the main i2s and the pre-divider will be set in hw_params function. However, if i2s2 is used, the pre-divider is not set in the hw_params function and the default value of i2s clock pre-divider 1 is too high for sysclk and DMIC usage. Fix by overriding default divider value to 2. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681 Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-11ASoC: do not close shared backend dailinkBanajit Goswami
commit b1cd2e34c69a2f3988786af451b6e17967c293a0 upstream. Multiple frontend dailinks may be connected to a backend dailink at the same time. When one of frontend dailinks is closed, the associated backend dailink should not be closed if it is connected to other active frontend dailinks. Change ensures that backend dailink is closed only after all connected frontend dailinks are closed. Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org> Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org> Signed-off-by: Patrick Lai <plai@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-11ALSA: hda - Fix speaker output from VAIO VPCL14M1RSergei A. Trusov
commit 3f3c371421e601fa93b6cb7fb52da9ad59ec90b4 upstream. Sony VAIO VPCL14M1R needs the quirk to make the speaker working properly. Tested-by: Dmitriy <mexx400@yandex.ru> Signed-off-by: Sergei A. Trusov <sergei.a.trusov@ya.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06ASoC: dpcm: Avoid putting stream state to STOP when FE stream is pausedPatrick Lai
[ Upstream commit 9f169b9f52a4afccdab7a7d2311b0c53a78a1e6b ] When multiple front-ends are using the same back-end, putting state of a front-end to STOP state upon receiving pause command will result in backend stream getting released by DPCM framework unintentionally. In order to avoid backend to be released when another active front-end stream is present, put the stream state to PAUSED state instead of STOP state. Signed-off-by: Patrick Lai <plai@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06ASoC: Intel: Skylake: Release FW ctx in cleanupJeeja KP
[ Upstream commit bc65a326c579e93a5c2120a65ede72f11369ee5a ] Saved firmware ctx was not never released, so release Firmware ctx in cleanup routine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06ASoC: Intel: bytcr-rt5640: fix settings in internal clock modePierre-Louis Bossart
[ Upstream commit 60448b077ed93d227e6c117a9e87db76ff0c1911 ] Frequency value of zero did not make sense, use same 24.576MHz setting and only change the clock source in idle mode Suggested-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06ALSA: usb-audio: test EP_FLAG_RUNNING at urb completionIoan-Adrian Ratiu
[ Upstream commit 13a6c8328e6056932dc680e447d4c5e8ad9add17 ] Testing EP_FLAG_RUNNING in snd_complete_urb() before running the completion logic allows us to save a few cpu cycles by returning early, skipping the pending urb in case the stream was stopped; the stop logic handles the urb and sets the completion callbacks to NULL. Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06ASoC: fsl_ssi: set fifo watermark to more reliable valueCaleb Crome
[ Upstream commit 4ee437fbf626b5ad756889d8bc0fcead3d66dde7 ] The fsl_ssi fifo watermark is by default set to 2 free spaces (i.e. activate DMA on FIFO when only 2 spaces are left.) This means the DMA must service the fifo within 2 audio samples, which is just not enough time for many use cases with high data rate. In many configurations the audio channel slips (causing l/r swap in stereo configurations, or channel slipping in multi-channel configurations). This patch gives more breathing room and allows the SSI to operate reliably by changing the fifio refill watermark to 8. There is no change in behavior for older chips (with an 8-deep fifo). Only the newer chips with a 15-deep fifo get the new behavior. I suspect a new fifo depth setting could be optimized on the older chips too, but I have not tested. Signed-off-by: Caleb Crome <caleb@crome.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLLJohn Hsu
[ Upstream commit a1792cda51300e15b03549cccf0b09f3be82e697 ] The clk_ref_div is not configured in the correct position of the register. The patch fixes that clk_ref_div, Pre-Scalar, is assigned the wrong value. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06ASoC: tlv320aic3x: Mark the RESET register as volatilePeter Ujfalusi
[ Upstream commit 63c3194b82530bd71fd49db84eb7ab656b8d404a ] The RESET register only have one self clearing bit and it should not be cached. If it is cached, when we sync the registers back to the chip we will initiate a software reset as well, which is not desirable. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06ALSA: hda - Add missing NVIDIA GPU codec IDs to patch tableDaniel Dadap
commit 74ec118152ea494a25ebb677cbc83a75c982ac5f upstream. Add codec IDs for several recently released, pending, and historical NVIDIA GPU audio controllers to the patch table, to allow the correct patch functions to be selected for them. Signed-off-by: Daniel Dadap <ddadap@nvidia.com> Reviewed-by: Andy Ritger <aritger@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06ALSA: fm801: Initialize chip after IRQ handler is registeredAndy Shevchenko
commit 610e1ae9b533be82b3aa118b907e0a703256913d upstream. The commit b56fa687e02b ("ALSA: fm801: detect FM-only card earlier") rearranged initialization calls, i.e. it makes snd_fm801_chip_init() to be called before we register interrupt handler and set PCI bus mastering. Somehow it prevents FM801-AU to work properly. Thus, partially revert initialization order changed by commit mentioned above. Fixes: b56fa687e02b ("ALSA: fm801: detect FM-only card earlier") Reported-by: Émeric MASCHINO <emeric.maschino@gmail.com> Tested-by: Émeric MASCHINO <emeric.maschino@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27ASoC: compress: Derive substream from stream based on directionSatish Babu Patakokila
commit 01b8cedfd0422326caae308641dcadaa85e0ca72 upstream. Currently compress driver hardcodes direction as playback to get substream from the stream. This results in getting the incorrect substream for compressed capture usecase. To fix this, remove the hardcoding and derive substream based on the stream direction. Signed-off-by: Satish Babu Patakokila <sbpata@codeaurora.org> Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-12rt286: add Thinkpad Helix 2 to force_combo_jack_tableYifeng Li
commit fe0dfd6358a17c79bd7d6996af7512ba452a7059 upstream. Thinkpad Helix 2 is a tablet PC, the audio is powered by Core M broadwell-audio and rt286 codec. For all versions of Linux kernel, the stereo output doesn't work properly when earphones are plugged in, the sound was coming out from both channels even if the audio contains only the left or right channel. Furthermore, if a music recorded in stereo is played, the two channels cancle out each other out, as a result, no voice but only distorted background music can be heard, like a sound card with builtin a Karaoke sount effect. Apparently this tablet uses a combo jack with polarity incorrectly set by rt286 driver. This patch adds DMI information of Thinkpad Helix 2 to force_combo_jack_table[] and the issue is resolved. The microphone input doesn't work regardless to the presence of this patch and still needs help from other developers to investigate. This is my first patch to LKML directly, sorry for CC-ing too many people here. Link: https://bugzilla.kernel.org/show_bug.cgi?id=93841 Signed-off-by: Yifeng Li <tomli@tomli.me> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05ALSA: hda - set input_path bitmap to zero after moving it to new placeHui Wang
commit a8f20fd25bdce81a8e41767c39f456d346b63427 upstream. Recently we met a problem, the codec has valid adcs and input pins, and they can form valid input paths, but the driver does not build valid controls for them like "Mic boost", "Capture Volume" and "Capture Switch". Through debugging, I found the driver needs to shrink the invalid adcs and input paths for this machine, so it will move the whole column bitmap value to the previous column, after moving it, the driver forgets to set the original column bitmap value to zero, as a result, the driver will invalidate the path whose index value is the original colume bitmap value. After executing this function, all valid input paths are invalidated by a mistake, there are no any valid input paths, so the driver won't build controls for them. Fixes: 3a65bcdc577a ("ALSA: hda - Fix inconsistent input_paths after ADC reduction") Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05ALSA: hda - Fix endless loop of codec configureTakashi Iwai
commit d94815f917da770d42c377786dc428f542e38f71 upstream. azx_codec_configure() loops over the codecs found on the given controller via a linked list. The code used to work in the past, but in the current version, this may lead to an endless loop when a codec binding returns an error. The culprit is that the snd_hda_codec_configure() unregisters the device upon error, and this eventually deletes the given codec object from the bus. Since the list is initialized via list_del_init(), the next object points to the same device itself. This behavior change was introduced at splitting the HD-audio code code, and forgotten to adapt it here. For fixing this bug, just use a *_safe() version of list iteration. Fixes: d068ebc25e6e ("ALSA: hda - Move some codes up to hdac_bus struct") Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-29ALSA: pcm: Don't treat NULL chmap as a fatal errorTakashi Iwai
commit 2deaeaf102d692cb6f764123b1df7aa118a8e97c upstream. The standard PCM chmap helper callbacks treat the NULL info->chmap as a fatal error and spews the kernel warning with stack trace when CONFIG_SND_DEBUG is on. This was OK, originally it was supposed to be always static and non-NULL. But, as the recent addition of Intel LPE audio driver shows, the chmap content may vary dynamically, and it can be even NULL when disconnected. The user still sees the kernel warning unnecessarily. For clearing such a confusion, this patch simply removes the snd_BUG_ON() in each place, just returns an error without warning. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-29ALSA: firewire-lib: Fix stall of process context at packet errorTakashi Sakamoto
commit 4a9bfafc64f44ef83de4e00ca1b57352af6cd8c2 upstream. At Linux v3.5, packet processing can be done in process context of ALSA PCM application as well as software IRQ context for OHCI 1394. Below is an example of the callgraph (some calls are omitted). ioctl(2) with e.g. HWSYNC (sound/core/pcm_native.c) ->snd_pcm_common_ioctl1() ->snd_pcm_hwsync() ->snd_pcm_stream_lock_irq (sound/core/pcm_lib.c) ->snd_pcm_update_hw_ptr() ->snd_pcm_udpate_hw_ptr0() ->struct snd_pcm_ops.pointer() (sound/firewire/*) = Each handler on drivers in ALSA firewire stack (sound/firewire/amdtp-stream.c) ->amdtp_stream_pcm_pointer() (drivers/firewire/core-iso.c) ->fw_iso_context_flush_completions() ->struct fw_card_driver.flush_iso_completion() (drivers/firewire/ohci.c) = flush_iso_completions() ->struct fw_iso_context.callback.sc (sound/firewire/amdtp-stream.c) = in_stream_callback() or out_stream_callback() ->... ->snd_pcm_stream_unlock_irq When packet queueing error occurs or detecting invalid packets in 'in_stream_callback()' or 'out_stream_callback()', 'snd_pcm_stop_xrun()' is called on local CPU with disabled IRQ. (sound/firewire/amdtp-stream.c) in_stream_callback() or out_stream_callback() ->amdtp_stream_pcm_abort() ->snd_pcm_stop_xrun() ->snd_pcm_stream_lock_irqsave() ->snd_pcm_stop() ->snd_pcm_stream_unlock_irqrestore() The process is stalled on the CPU due to attempt to acquire recursive lock. [ 562.630853] INFO: rcu_sched detected stalls on CPUs/tasks: [ 562.630861] 2-...: (1 GPs behind) idle=37d/140000000000000/0 softirq=38323/38323 fqs=7140 [ 562.630862] (detected by 3, t=15002 jiffies, g=21036, c=21035, q=5933) [ 562.630866] Task dump for CPU 2: [ 562.630867] alsa-source-OXF R running task 0 6619 1 0x00000008 [ 562.630870] Call Trace: [ 562.630876] ? vt_console_print+0x79/0x3e0 [ 562.630880] ? msg_print_text+0x9d/0x100 [ 562.630883] ? up+0x32/0x50 [ 562.630885] ? irq_work_queue+0x8d/0xa0 [ 562.630886] ? console_unlock+0x2b6/0x4b0 [ 562.630888] ? vprintk_emit+0x312/0x4a0 [ 562.630892] ? dev_vprintk_emit+0xbf/0x230 [ 562.630895] ? do_sys_poll+0x37a/0x550 [ 562.630897] ? dev_printk_emit+0x4e/0x70 [ 562.630900] ? __dev_printk+0x3c/0x80 [ 562.630903] ? _raw_spin_lock+0x20/0x30 [ 562.630909] ? snd_pcm_stream_lock+0x31/0x50 [snd_pcm] [ 562.630914] ? _snd_pcm_stream_lock_irqsave+0x2e/0x40 [snd_pcm] [ 562.630918] ? snd_pcm_stop_xrun+0x16/0x70 [snd_pcm] [ 562.630922] ? in_stream_callback+0x3e6/0x450 [snd_firewire_lib] [ 562.630925] ? handle_ir_packet_per_buffer+0x8e/0x1a0 [firewire_ohci] [ 562.630928] ? ohci_flush_iso_completions+0xa3/0x130 [firewire_ohci] [ 562.630932] ? fw_iso_context_flush_completions+0x15/0x20 [firewire_core] [ 562.630935] ? amdtp_stream_pcm_pointer+0x2d/0x40 [snd_firewire_lib] [ 562.630938] ? pcm_capture_pointer+0x19/0x20 [snd_oxfw] [ 562.630943] ? snd_pcm_update_hw_ptr0+0x47/0x3d0 [snd_pcm] [ 562.630945] ? poll_select_copy_remaining+0x150/0x150 [ 562.630947] ? poll_select_copy_remaining+0x150/0x150 [ 562.630952] ? snd_pcm_update_hw_ptr+0x10/0x20 [snd_pcm] [ 562.630956] ? snd_pcm_hwsync+0x45/0xb0 [snd_pcm] [ 562.630960] ? snd_pcm_common_ioctl1+0x1ff/0xc90 [snd_pcm] [ 562.630962] ? futex_wake+0x90/0x170 [ 562.630966] ? snd_pcm_capture_ioctl1+0x136/0x260 [snd_pcm] [ 562.630970] ? snd_pcm_capture_ioctl+0x27/0x40 [snd_pcm] [ 562.630972] ? do_vfs_ioctl+0xa3/0x610 [ 562.630974] ? vfs_read+0x11b/0x130 [ 562.630976] ? SyS_ioctl+0x79/0x90 [ 562.630978] ? entry_SYSCALL_64_fastpath+0x1e/0xad This commit fixes the above bug. This assumes two cases: 1. Any error is detected in software IRQ context of OHCI 1394 context. In this case, PCM substream should be aborted in packet handler. On the other hand, it should not be done in any process context. TO distinguish these two context, use 'in_interrupt()' macro. 2. Any error is detect in process context of ALSA PCM application. In this case, PCM substream should not be aborted in packet handler because PCM substream lock is acquired. The task to abort PCM substream should be done in ALSA PCM core. For this purpose, SNDRV_PCM_POS_XRUN is returned at 'struct snd_pcm_ops.pointer()'. Suggested-by: Clemens Ladisch <clemens@ladisch.de> Fixes: e9148dddc3c7("ALSA: firewire-lib: flush completed packets when reading PCM position") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14ASoC: Fix use-after-free at card unregistrationTakashi Iwai
commit 4efda5f2130da033aeedc5b3205569893b910de2 upstream. soc_cleanup_card_resources() call snd_card_free() at the last of its procedure. This turned out to lead to a use-after-free. PCM runtimes have been already removed via soc_remove_pcm_runtimes(), while it's dereferenced later in soc_pcm_free() called via snd_card_free(). The fix is simple: just move the snd_card_free() call to the beginning of the whole procedure. This also gives another benefit: it guarantees that all operations have been shut down before actually releasing the resources, which was racy until now. Reported-and-tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECTTakashi Iwai
commit ba3021b2c79b2fa9114f92790a99deb27a65b728 upstream. snd_timer_user_tselect() reallocates the queue buffer dynamically, but it forgot to reset its indices. Since the read may happen concurrently with ioctl and snd_timer_user_tselect() allocates the buffer via kmalloc(), this may lead to the leak of uninitialized kernel-space data, as spotted via KMSAN: BUG: KMSAN: use of unitialized memory in snd_timer_user_read+0x6c4/0xa10 CPU: 0 PID: 1037 Comm: probe Not tainted 4.11.0-rc5+ #2739 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x143/0x1b0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007 kmsan_check_memory+0xc2/0x140 mm/kmsan/kmsan.c:1086 copy_to_user ./arch/x86/include/asm/uaccess.h:725 snd_timer_user_read+0x6c4/0xa10 sound/core/timer.c:2004 do_loop_readv_writev fs/read_write.c:716 __do_readv_writev+0x94c/0x1380 fs/read_write.c:864 do_readv_writev fs/read_write.c:894 vfs_readv fs/read_write.c:908 do_readv+0x52a/0x5d0 fs/read_write.c:934 SYSC_readv+0xb6/0xd0 fs/read_write.c:1021 SyS_readv+0x87/0xb0 fs/read_write.c:1018 This patch adds the missing reset of queue indices. Together with the previous fix for the ioctl/read race, we cover the whole problem. Reported-by: Alexander Potapenko <glider@google.com> Tested-by: Alexander Potapenko <glider@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14ALSA: timer: Fix race between read and ioctlTakashi Iwai
commit d11662f4f798b50d8c8743f433842c3e40fe3378 upstream. The read from ALSA timer device, the function snd_timer_user_tread(), may access to an uninitialized struct snd_timer_user fields when the read is concurrently performed while the ioctl like snd_timer_user_tselect() is invoked. We have already fixed the races among ioctls via a mutex, but we seem to have forgotten the race between read vs ioctl. This patch simply applies (more exactly extends the already applied range of) tu->ioctl_lock in snd_timer_user_tread() for closing the race window. Reported-by: Alexander Potapenko <glider@google.com> Tested-by: Alexander Potapenko <glider@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-07ALSA: hda - apply STAC_9200_DELL_M22 quirk for Dell Latitude D430Alexander Tsoy
commit 1fc2e41f7af4572b07190f9dec28396b418e9a36 upstream. This model is actually called 92XXM2-8 in Windows driver. But since pin configs for M22 and M28 are identical, just reuse M22 quirk. Fixes external microphone (tested) and probably docking station ports (not tested). Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25ASoC: cs4271: configure reset GPIO as outputAlexander Sverdlin
commit 49b2e27ab9f66b0a22c21980ad8118a4038324ae upstream. During reset "refactoring" the output configuration was lost. This commit repairs sound on EDB93XX boards. Fixes: 9a397f4 ("ASoC: cs4271: add regulator consumer support") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25ALSA: hda: Fix cpu lockup when stopping the cmd dmasJeeja KP
commit 960013762df0a214b57f2fce655422fb52bdfd2c upstream. Using jiffies in hdac_wait_for_cmd_dmas() to determine when to time out when interrupts are off (snd_hdac_bus_stop_cmd_io()/spin_lock_irq()) causes hard lockup so unlock while waiting using jiffies. ---<-snip->--- <0>[ 1211.603046] NMI watchdog: Watchdog detected hard LOCKUP on cpu 3 <4>[ 1211.603047] Modules linked in: snd_hda_intel i915 vgem <4>[ 1211.603053] irq event stamp: 13366 <4>[ 1211.603053] hardirqs last enabled at (13365): ... <4>[ 1211.603059] Call Trace: <4>[ 1211.603059] ? delay_tsc+0x3d/0xc0 <4>[ 1211.603059] __delay+0xa/0x10 <4>[ 1211.603060] __const_udelay+0x31/0x40 <4>[ 1211.603060] snd_hdac_bus_stop_cmd_io+0x96/0xe0 [snd_hda_core] <4>[ 1211.603060] ? azx_dev_disconnect+0x20/0x20 [snd_hda_intel] <4>[ 1211.603061] snd_hdac_bus_stop_chip+0xb1/0x100 [snd_hda_core] <4>[ 1211.603061] azx_stop_chip+0x9/0x10 [snd_hda_codec] <4>[ 1211.603061] azx_suspend+0x72/0x220 [snd_hda_intel] <4>[ 1211.603061] pci_pm_suspend+0x71/0x140 <4>[ 1211.603062] dpm_run_callback+0x6f/0x330 <4>[ 1211.603062] ? pci_pm_freeze+0xe0/0xe0 <4>[ 1211.603062] __device_suspend+0xf9/0x370 <4>[ 1211.603062] ? dpm_watchdog_set+0x60/0x60 <4>[ 1211.603063] async_suspend+0x1a/0x90 <4>[ 1211.603063] async_run_entry_fn+0x34/0x160 <4>[ 1211.603063] process_one_work+0x1f4/0x6d0 <4>[ 1211.603063] ? process_one_work+0x16e/0x6d0 <4>[ 1211.603064] worker_thread+0x49/0x4a0 <4>[ 1211.603064] kthread+0x107/0x140 <4>[ 1211.603064] ? process_one_work+0x6d0/0x6d0 <4>[ 1211.603065] ? kthread_create_on_node+0x40/0x40 <4>[ 1211.603065] ret_from_fork+0x2e/0x40 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100419 Fixes: 38b19ed7f81ec ("ALSA: hda: fix to wait for RIRB & CORB DMA to set") Reported-by: Marta Lofstedt <marta.lofstedt@intel.com> Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14ALSA: hda - Fix deadlock of controller device lock at unbindingTakashi Iwai
commit ab949d519601880fd46e8bc1445d6a453bf2dc09 upstream. Imre Deak reported a deadlock of HD-audio driver at unbinding while it's still in probing. Since we probe the codecs asynchronously in a work, the codec driver probe may still be kicked off while the controller itself is being unbound. And, azx_remove() tries to process all pending tasks via cancel_work_sync() for fixing the other races (see commit [0b8c82190c12: ALSA: hda - Cancel probe work instead of flush at remove]), now we may meet a bizarre deadlock: Unbind snd_hda_intel via sysfs: device_release_driver() -> device_lock(snd_hda_intel) -> azx_remove() -> cancel_work_sync(azx_probe_work) azx_probe_work(): codec driver probe() -> __driver_attach() -> device_lock(snd_hda_intel) This deadlock is caused by the fact that both device_release_driver() and driver_probe_device() take both the device and its parent locks at the same time. The codec device sets the controller device as its parent, and this lock is taken before the probe() callback is called, while the controller remove() callback gets called also with the same lock. In this patch, as an ugly workaround, we unlock the controller device temporarily during cancel_work_sync() call. The race against another bind call should be still suppressed by the parent's device lock. Reported-by: Imre Deak <imre.deak@intel.com> Fixes: 0b8c82190c12 ("ALSA: hda - Cancel probe work instead of flush at remove") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-03ASoC: intel: Fix PM and non-atomic crash in bytcr driversTakashi Iwai
commit 6e4cac23c5a648d50b107d1b53e9c4e1120c7943 upstream. The FE setups of Intel SST bytcr_rt5640 and bytcr_rt5651 drivers carry the ignore_suspend flag, and this prevents the suspend/resume working properly while the stream is running, since SST core code has the check of the running streams and returns -EBUSY. Drop these superfluous flags for fixing the behavior. Also, the bytcr_rt5640 driver lacks of nonatomic flag in some FE definitions, which leads to the kernel Oops at suspend/resume like: BUG: scheduling while atomic: systemd-sleep/3144/0x00000003 Call Trace: dump_stack+0x5c/0x7a __schedule_bug+0x55/0x70 __schedule+0x63c/0x8c0 schedule+0x3d/0x90 schedule_timeout+0x16b/0x320 ? del_timer_sync+0x50/0x50 ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? remove_wait_queue+0x60/0x60 ? sst_prepare_and_post_msg+0x275/0x960 [snd_intel_sst_core] ? sst_pause_stream+0x9b/0x110 [snd_intel_sst_core] .... This patch addresses these appropriately, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-03ALSA: seq: Don't break snd_use_lock_sync() loop by timeoutTakashi Iwai
commit 4e7655fd4f47c23e5249ea260dc802f909a64611 upstream. The snd_use_lock_sync() (thus its implementation snd_use_lock_sync_helper()) has the 5 seconds timeout to break out of the sync loop. It was introduced from the beginning, just to be "safer", in terms of avoiding the stupid bugs. However, as Ben Hutchings suggested, this timeout rather introduces a potential leak or use-after-free that was apparently fixed by the commit 2d7d54002e39 ("ALSA: seq: Fix race during FIFO resize"): for example, snd_seq_fifo_event_in() -> snd_seq_event_dup() -> copy_from_user() could block for a long time, and snd_use_lock_sync() goes timeout and still leaves the cell at releasing the pool. For fixing such a problem, we remove the break by the timeout while still keeping the warning. Suggested-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-03ALSA: firewire-lib: fix inappropriate assignment between signed/unsigned typeTakashi Sakamoto
commit dfb00a56935186171abb5280b3407c3f910011f1 upstream. An abstraction of asynchronous transaction for transmission of MIDI messages was introduced in Linux v4.4. Each driver can utilize this abstraction to transfer MIDI messages via fixed-length payload of transaction to a certain unit address. Filling payload of the transaction is done by callback. In this callback, each driver can return negative error code, however current implementation assigns the return value to unsigned variable. This commit changes type of the variable to fix the bug. Reported-by: Julia Lawall <Julia.Lawall@lip6.fr> Fixes: 585d7cba5e1f ("ALSA: firewire-lib: add helper functions for asynchronous transactions to transfer MIDI messages") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-03ALSA: oxfw: fix regression to handle Stanton SCS.1m/1dTakashi Sakamoto
commit 3d016d57fdc5e6caa4cd67896f4b081bccad6e2c upstream. At a commit 6c29230e2a5f ("ALSA: oxfw: delayed registration of sound card"), ALSA oxfw driver fails to handle SCS.1m/1d, due to -EBUSY at a call of snd_card_register(). The cause is that the driver manages to register two rawmidi instances with the same device number 0. This is a regression introduced since kernel 4.7. This commit fixes the regression, by fixing up device property after discovering stream formats. Fixes: 6c29230e2a5f ("ALSA: oxfw: delayed registration of sound card") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-21ASoC: Intel: select DW_DMAC_CORE since it's mandatoryAndy Shevchenko
commit ebf79091bf85d9b2270ab29191de9cd3aaf888c5 upstream. Select DW_DMAC_CORE like the rest of glue drivers do, e.g. drivers/dma/dw/Kconfig. While here group selectors under SND_SOC_INTEL_HASWELL and SND_SOC_INTEL_BAYTRAIL. Make platforms, which are using a common SST firmware driver, to be dependent on DMADEVICES. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-12ASoC: sun4i-i2s: Add quirks to handle a31 compatibleMylène Josserand
[ Upstream commit 2ad6f30de7087515a0bc2a718fca6681a57739a0 ] Some SoCs have a reset line that must be asserted/deasserted. This patch adds a quirk to handle the new compatible "allwinner,sun6i-a31-i2s" which will deassert the reset line on probe function and assert it on remove's one. This new compatible is useful in case of A33 codec driver, for example. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-12 01:13:01 +0000