summaryrefslogtreecommitdiff
path: root/fs/ocfs2/super.c
AgeCommit message (Collapse)Author
2021-10-27ocfs2: mount fails with buffer overflow in strlenValentin Vidic
commit b15fa9224e6e1239414525d8d556d824701849fc upstream. Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the trace below. Problem seems to be that strings for cluster stack and cluster name are not guaranteed to be null terminated in the disk representation, while strlcpy assumes that the source string is always null terminated. This causes a read outside of the source string triggering the buffer overflow detection. detected buffer overflow in strlen ------------[ cut here ]------------ kernel BUG at lib/string.c:1149! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1 Debian 5.14.6-2 RIP: 0010:fortify_panic+0xf/0x11 ... Call Trace: ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2] ocfs2_fill_super+0x359/0x19b0 [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x454/0xa20 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lkml.kernel.org/r/20210929180654.32460-1-vvidic@valentin-vidic.from.hr Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18ocfs2: initialize ip_next_orphanWengang Wang
commit f5785283dd64867a711ca1fb1f5bb172f252ecdf upstream. Though problem if found on a lower 4.1.12 kernel, I think upstream has same issue. In one node in the cluster, there is the following callback trace: # cat /proc/21473/stack __ocfs2_cluster_lock.isra.36+0x336/0x9e0 [ocfs2] ocfs2_inode_lock_full_nested+0x121/0x520 [ocfs2] ocfs2_evict_inode+0x152/0x820 [ocfs2] evict+0xae/0x1a0 iput+0x1c6/0x230 ocfs2_orphan_filldir+0x5d/0x100 [ocfs2] ocfs2_dir_foreach_blk+0x490/0x4f0 [ocfs2] ocfs2_dir_foreach+0x29/0x30 [ocfs2] ocfs2_recover_orphans+0x1b6/0x9a0 [ocfs2] ocfs2_complete_recovery+0x1de/0x5c0 [ocfs2] process_one_work+0x169/0x4a0 worker_thread+0x5b/0x560 kthread+0xcb/0xf0 ret_from_fork+0x61/0x90 The above stack is not reasonable, the final iput shouldn't happen in ocfs2_orphan_filldir() function. Looking at the code, 2067 /* Skip inodes which are already added to recover list, since dio may 2068 * happen concurrently with unlink/rename */ 2069 if (OCFS2_I(iter)->ip_next_orphan) { 2070 iput(iter); 2071 return 0; 2072 } 2073 The logic thinks the inode is already in recover list on seeing ip_next_orphan is non-NULL, so it skip this inode after dropping a reference which incremented in ocfs2_iget(). While, if the inode is already in recover list, it should have another reference and the iput() at line 2070 should not be the final iput (dropping the last reference). So I don't think the inode is really in the recover list (no vmcore to confirm). Note that ocfs2_queue_orphans(), though not shown up in the call back trace, is holding cluster lock on the orphan directory when looking up for unlinked inodes. The on disk inode eviction could involve a lot of IOs which may need long time to finish. That means this node could hold the cluster lock for very long time, that can lead to the lock requests (from other nodes) to the orhpan directory hang for long time. Looking at more on ip_next_orphan, I found it's not initialized when allocating a new ocfs2_inode_info structure. This causes te reflink operations from some nodes hang for very long time waiting for the cluster lock on the orphan directory. Fix: initialize ip_next_orphan as NULL. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201109171746.27884-1-wen.gang.wang@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21ocfs2: change slot number type s16 to u16Junxiao Bi
commit 38d51b2dd171ad973afc1f5faab825ed05a2d5e9 upstream. Dan Carpenter reported the following static checker warning. fs/ocfs2/super.c:1269 ocfs2_parse_options() warn: '(-1)' 65535 can't fit into 32767 'mopt->slot' fs/ocfs2/suballoc.c:859 ocfs2_init_inode_steal_slot() warn: '(-1)' 65535 can't fit into 32767 'osb->s_inode_steal_slot' fs/ocfs2/suballoc.c:867 ocfs2_init_meta_steal_slot() warn: '(-1)' 65535 can't fit into 32767 'osb->s_meta_steal_slot' That's because OCFS2_INVALID_SLOT is (u16)-1. Slot number in ocfs2 can be never negative, so change s16 to u16. Fixes: 9277f8334ffc ("ocfs2: fix value of OCFS2_INVALID_SLOT") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Gang He <ghe@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200627001259.19757-1-junxiao.bi@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30ocfs2: return -EROFS to mount.ocfs2 if inode block is invalidpiaojun
[ Upstream commit 025bcbde3634b2c9b316f227fed13ad6ad6817fb ] If metadata is corrupted such as 'invalid inode block', we will get failed by calling 'mount()' and then set filesystem readonly as below: ocfs2_mount ocfs2_initialize_super ocfs2_init_global_system_inodes ocfs2_iget ocfs2_read_locked_inode ocfs2_validate_inode_block ocfs2_error ocfs2_handle_error ocfs2_set_ro_flag(osb, 0); // set readonly In this situation we need return -EROFS to 'mount.ocfs2', so that user can fix it by fsck. And then mount again. In addition, 'mount.ocfs2' should be updated correspondingly as it only return 1 for all errno. And I will post a patch for 'mount.ocfs2' too. Link: http://lkml.kernel.org/r/5A4302FA.2010606@huawei.com Signed-off-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Reviewed-by: Changwei Ge <ge.changwei@h3c.com> Reviewed-by: Gang He <ghe@suse.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-04fs: create and use seq_show_option for escapingKees Cook
Many file systems that implement the show_options hook fail to correctly escape their output which could lead to unescaped characters (e.g. new lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This could lead to confusion, spoofed entries (resulting in things like systemd issuing false d-bus "mount" notifications), and who knows what else. This looks like it would only be the root user stepping on themselves, but it's possible weird things could happen in containers or in other situations with delegated mount privileges. Here's an example using overlay with setuid fusermount trusting the contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use of "sudo" is something more sneaky: $ BASE="ovl" $ MNT="$BASE/mnt" $ LOW="$BASE/lower" $ UP="$BASE/upper" $ WORK="$BASE/work/ 0 0 none /proc fuse.pwn user_id=1000" $ mkdir -p "$LOW" "$UP" "$WORK" $ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt $ cat /proc/mounts none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0 none /proc fuse.pwn user_id=1000 0 0 $ fusermount -u /proc $ cat /proc/mounts cat: /proc/mounts: No such file or directory This fixes the problem by adding new seq_show_option and seq_show_option_n helpers, and updating the vulnerable show_option handlers to use them as needed. Some, like SELinux, need to be open coded due to unusual existing escape mechanisms. [akpm@linux-foundation.org: add lost chunk, per Kees] [keescook@chromium.org: seq_show_option should be using const parameters] Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Jan Kara <jack@suse.com> Acked-by: Paul Moore <paul@paul-moore.com> Cc: J. R. Okajima <hooanon05g@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04ocfs2: neaten do_error, ocfs2_error and ocfs2_abortJoe Perches
These uses sometimes do and sometimes don't have '\n' terminations. Make the uses consistently use '\n' terminations and remove the newline from the functions. Miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04ocfs2: add errors=continueGoldwyn Rodrigues
OCFS2 is often used in high-availaibility systems. However, ocfs2 converts the filesystem to read-only at the drop of the hat. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. This attempt is to add errors=continue, which would return the EIO to the calling process and terminate furhter processing so that the filesystem is not corrupted further. However, the filesystem is not converted to read-only. As a future plan, I intend to create a small utility or extend fsck.ocfs2 to fix small errors such as in the inode. The input to the utility such as the inode can come from the kernel logs so we don't have to schedule a downtime for fixing small-enough errors. The patch changes the ocfs2_error to return an error. The error returned depends on the mount option set. If none is set, the default is to turn the filesystem read-only. Perhaps errors=continue is not the best option name. Historically it is used for making an attempt to progress in the current process itself. Should we call it errors=eio? or errors=killproc? Suggestions/Comments welcome. Sources are available at: https://github.com/goldwynr/linux/tree/error-cont Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04ocfs2: fix race between dio and recover orphanJoseph Qi
During direct io the inode will be added to orphan first and then deleted from orphan. There is a race window that the orphan entry will be deleted twice and thus trigger the BUG when validating OCFS2_DIO_ORPHANED_FL in ocfs2_del_inode_from_orphan. ocfs2_direct_IO_write ... ocfs2_add_inode_to_orphan >>>>>>>> race window. 1) another node may rm the file and then down, this node take care of orphan recovery and clear flag OCFS2_DIO_ORPHANED_FL. 2) since rw lock is unlocked, it may race with another orphan recovery and append dio. ocfs2_del_inode_from_orphan So take inode mutex lock when recovering orphans and make rw unlock at the end of aio write in case of append dio. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reported-by: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Weiwei Wang <wangww631@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-21Revert "ocfs2: incorrect check for debugfs returns"Linus Torvalds
This reverts commit e2ac55b6a8e337fac7cc59c6f452caac92ab5ee6. Huang Ying reports that this causes a hang at boot with debugfs disabled. It is true that the debugfs error checks are kind of confusing, and this code certainly merits more cleanup and thinking about it, but there's something wrong with the trivial "check not just for NULL, but for error pointers too" patch. Yes, with debugfs disabled, we will end up setting the o2hb_debug_dir pointer variable to an error pointer (-ENODEV), and then continue as if everything was fine. But since debugfs is disabled, all the _users_ of that pointer end up being compiled away, so even though the pointer can not be dereferenced, that's still fine. So it's confusing and somewhat questionable, but the "more correct" error checks end up causing more trouble than they fix. Reported-by: Huang Ying <ying.huang@intel.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Chengyu Song <csong84@gatech.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14cleancache: zap uuid arg of cleancache_init_shared_fsVladimir Davydov
Use super_block->s_uuid instead. Every shared filesystem using cleancache must now initialize super_block->s_uuid before calling cleancache_init_shared_fs. The only one on the tree, ocfs2, already meets this requirement. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Stefan Hengelein <ilendir@googlemail.com> Cc: Florian Schmaus <fschmaus@gmail.com> Cc: Andor Daam <andor.daam@googlemail.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Bob Liu <lliubbo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: copy fs uuid to superblockVladimir Davydov
Currently, maximal number of cleancache enabled filesystems equals 32, which is insufficient nowadays, because a Linux host can have hundreds of containers on board, each of which might want its own filesystem. This patch set targets at removing this limitation - see patch 4 for more details. Patches 1-3 prepare the code for this change. This patch (of 4): This will allow us to remove the uuid argument from cleancache_init_shared_fs. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Stefan Hengelein <ilendir@googlemail.com> Cc: Florian Schmaus <fschmaus@gmail.com> Cc: Andor Daam <andor.daam@googlemail.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Bob Liu <lliubbo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: logging: remove static buffer, use vsprintf extension %pVJoe Perches
Use the vsprintf %pV extension to avoid using a static buffer and remove the now unnecessary buffer. Signed-off-by: Joe Perches <joe@perches.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: incorrect check for debugfs returnsChengyu Song
debugfs_create_dir and debugfs_create_file may return -ENODEV when debugfs is not configured, so the return value should be checked against ERROR_VALUE as well, otherwise the later dereference of the dentry pointer would crash the kernel. This patch tries to solve this problem by fixing certain checks. However, I have that found other call sites are protected by #ifdef CONFIG_DEBUG_FS. In current implementation, if CONFIG_DEBUG_FS is defined, then the above two functions will never return any ERROR_VALUE. So another possibility to fix this is to surround all the buggy checks/functions with the same #ifdef CONFIG_DEBUG_FS. But I'm not sure if this would break any functionality, as only OCFS2_FS_STATS declares dependency on DEBUG_FS. Signed-off-by: Chengyu Song <csong84@gatech.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16ocfs2: wait for orphan recovery first once append O_DIRECT write crashJoseph Qi
If one node has crashed with orphan entry leftover, another node which do append O_DIRECT write to the same file will override the i_dio_orphaned_slot. Then the old entry won't be cleaned forever. If this case happens, we let it wait for orphan recovery first. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Weiwei Wang <wangww631@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Xuejiufei <xuejiufei@huawei.com> Cc: alex chen <alex.chen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: "Bite-sized chunks this time, to avoid the MTA ratelimiting woes. - fs/notify updates - ocfs2 - some of MM" That laconic "some MM" is mainly the removal of remap_file_pages(), which is a big simplification of the VM, and which gets rid of a *lot* of random cruft and special cases because we no longer support the non-linear mappings that it used. From a user interface perspective, nothing has changed, because the remap_file_pages() syscall still exists, it's just done by emulating the old behavior by creating a lot of individual small mappings instead of one non-linear one. The emulation is slower than the old "native" non-linear mappings, but nobody really uses or cares about remap_file_pages(), and simplifying the VM is a big advantage. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (78 commits) memcg: zap memcg_slab_caches and memcg_slab_mutex memcg: zap memcg_name argument of memcg_create_kmem_cache memcg: zap __memcg_{charge,uncharge}_slab mm/page_alloc.c: place zone_id check before VM_BUG_ON_PAGE check mm: hugetlb: fix type of hugetlb_treat_as_movable variable mm, hugetlb: remove unnecessary lower bound on sysctl handlers"? mm: memory: merge shared-writable dirtying branches in do_wp_page() mm: memory: remove ->vm_file check on shared writable vmas xtensa: drop _PAGE_FILE and pte_file()-related helpers x86: drop _PAGE_FILE and pte_file()-related helpers unicore32: drop pte_file()-related helpers um: drop _PAGE_FILE and pte_file()-related helpers tile: drop pte_file()-related helpers sparc: drop pte_file()-related helpers sh: drop _PAGE_FILE and pte_file()-related helpers score: drop _PAGE_FILE and pte_file()-related helpers s390: drop pte_file()-related helpers parisc: drop _PAGE_FILE and pte_file()-related helpers openrisc: drop _PAGE_FILE and pte_file()-related helpers nios2: drop _PAGE_FILE and pte_file()-related helpers ...
2015-02-10ocfs2: add a mount option journal_async_commit on ocfs2 filesystemalex chen
Add a mount option to support JBD2 feature: JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT. When this feature is opened, journal commit block can be written to disk without waiting for descriptor blocks, which can improve journal commit performance. This option will enable 'journal_checksum' internally. Using the fs_mark benchmark, using journal_async_commit shows a 50% improvement, the files per second go up from 215.2 to 317.5. test script: fs_mark -d /mnt/ocfs2/ -s 10240 -n 1000 default: FSUse% Count Size Files/sec App Overhead 0 1000 10240 215.2 17878 with journal_async_commit option: FSUse% Count Size Files/sec App Overhead 0 1000 10240 317.5 17881 Signed-off-by: Alex Chen <alex.chen@huawei.com> Signed-off-by: Weiwei Wang <wangww631@huawei.comm> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-30ocfs2: Use generic helpers for quotaon and quotaoffJan Kara
Ocfs2 can just use the generic helpers provided by quota code for turning quotas on and off when quota files are stored as system inodes. The only difference is the feature test in ocfs2_quota_on() and that is covered by dquot_quota_enable() checking whether usage tracking is enabled (which can happen only if the filesystem has the quota feature set). Signed-off-by: Jan Kara <jack@suse.cz>
2014-12-10Merge branch 'akpm' (patchbomb from Andrew)Linus Torvalds
Merge first patchbomb from Andrew Morton: - a few minor cifs fixes - dma-debug upadtes - ocfs2 - slab - about half of MM - procfs - kernel/exit.c - panic.c tweaks - printk upates - lib/ updates - checkpatch updates - fs/binfmt updates - the drivers/rtc tree - nilfs - kmod fixes - more kernel/exit.c - various other misc tweaks and fixes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits) exit: pidns: fix/update the comments in zap_pid_ns_processes() exit: pidns: alloc_pid() leaks pid_namespace if child_reaper is exiting exit: exit_notify: re-use "dead" list to autoreap current exit: reparent: call forget_original_parent() under tasklist_lock exit: reparent: avoid find_new_reaper() if no children exit: reparent: introduce find_alive_thread() exit: reparent: introduce find_child_reaper() exit: reparent: document the ->has_child_subreaper checks exit: reparent: s/while_each_thread/for_each_thread/ in find_new_reaper() exit: reparent: fix the cross-namespace PR_SET_CHILD_SUBREAPER reparenting exit: reparent: fix the dead-parent PR_SET_CHILD_SUBREAPER reparenting exit: proc: don't try to flush /proc/tgid/task/tgid exit: release_task: fix the comment about group leader accounting exit: wait: drop tasklist_lock before psig->c* accounting exit: wait: don't use zombie->real_parent exit: wait: cleanup the ptrace_reparented() checks usermodehelper: kill the kmod_thread_locker logic usermodehelper: don't use CLONE_VFORK for ____call_usermodehelper() fs/hfs/catalog.c: fix comparison bug in hfs_cat_keycmp nilfs2: fix the nilfs_iget() vs. nilfs_new_inode() races ...
2014-12-10ocfs2: fix error handling when creating debugfs root in ocfs2_init()Jan Kara
Error handling if creation of root of debugfs in ocfs2_init() fails is broken. Although error code is set we fail to exit ocfs2_init() with error and thus initialization ends with success. Later when mounting a filesystem, ocfs2 debugfs entries end up being created in the root of debugfs filesystem which is confusing. Fix the error handling to bail out. Coverity id: 1227009. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-10ocfs2: Convert to private i_dquot fieldJan Kara
CC: Mark Fasheh <mfasheh@suse.com> CC: Joel Becker <jlbec@evilplan.org> CC: ocfs2-devel@oss.oracle.com Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2014-10-11Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF and quota updates from Jan Kara: "A few UDF fixes and also a few patches which are preparing filesystems for support of project quotas in VFS" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fix loading of special inodes ocfs2: Back out change to use OCFS2_MAXQUOTAS in ocfs2_setattr() udf: remove redundant sys_tz declaration ocfs2: Don't use MAXQUOTAS value reiserfs: Don't use MAXQUOTAS value ext3: Don't use MAXQUOTAS value udf: Fix race between write(2) and close(2)
2014-09-26ocfs2: free vol_label in ocfs2_delete_osb()Joseph Qi
osb->vol_label is malloced in ocfs2_initialize_super but not freed if error occurs or during umount, thus causing a memory leak. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-17ocfs2: Don't use MAXQUOTAS valueJan Kara
MAXQUOTAS value defines maximum number of quota types VFS supports. This isn't necessarily the number of types ocfs2 supports and with addition of project quotas these two numbers stop matching. So make ocfs2 use its private definition. CC: Mark Fasheh <mfasheh@suse.com> CC: Joel Becker <jlbec@evilplan.org> CC: ocfs2-devel@oss.oracle.com Signed-off-by: Jan Kara <jack@suse.cz>
2014-06-23ocfs2: revert "ocfs2: fix NULL pointer dereference when dismount and ↵Xue jiufei
ocfs2rec simultaneously" 75f82eaa502c ("ocfs2: fix NULL pointer dereference when dismount and ocfs2rec simultaneously") may cause umount hang while shutting down truncate log. The situation is as followes: ocfs2_dismout_volume -> ocfs2_recovery_exit -> free osb->recovery_map -> ocfs2_truncate_shutdown -> lock global bitmap inode -> ocfs2_wait_for_recovery -> check whether osb->recovery_map->rm_used is zero Because osb->recovery_map is already freed, rm_used can be any other values, so it may yield umount hang. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04fs/ocfs2/super.c: use OCFS2_MAX_VOL_LABEL_LEN and strlcpyFabian Frederick
Replace strncpy(size 63) by defined value. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04ocfs2: remove NULL assignments on staticFabian Frederick
Static values are automatically initialized to NULL. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Major changes for 3.14 include support for the newly added ZERO_RANGE and COLLAPSE_RANGE fallocate operations, and scalability improvements in the jbd2 layer and in xattr handling when the extended attributes spill over into an external block. Other than that, the usual clean ups and minor bug fixes" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits) ext4: fix premature freeing of partial clusters split across leaf blocks ext4: remove unneeded test of ret variable ext4: fix comment typo ext4: make ext4_block_zero_page_range static ext4: atomically set inode->i_flags in ext4_set_inode_flags() ext4: optimize Hurd tests when reading/writing inodes ext4: kill i_version support for Hurd-castrated file systems ext4: each filesystem creates and uses its own mb_cache fs/mbcache.c: doucple the locking of local from global data fs/mbcache.c: change block and index hash chain to hlist_bl_node ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate ext4: refactor ext4_fallocate code ext4: Update inode i_size after the preallocation ext4: fix partial cluster handling for bigalloc file systems ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents ext4: only call sync_filesystm() when remounting read-only fs: push sync_filesystem() down to the file system's remount_fs() jbd2: improve error messages for inconsistent journal heads jbd2: minimize region locked by j_list_lock in jbd2_journal_forget() jbd2: minimize region locked by j_list_lock in journal_get_create_access() ...
2014-04-03ocfs2: avoid system inode ref confusion by adding mutex lockjiangyiwen
The following case may lead to the same system inode ref in confusion. A thread B thread ocfs2_get_system_file_inode ->get_local_system_inode ->_ocfs2_get_system_file_inode because of *arr == NULL, ocfs2_get_system_file_inode ->get_local_system_inode ->_ocfs2_get_system_file_inode gets first ref thru _ocfs2_get_system_file_inode, gets second ref thru igrab and set *arr = inode at the moment, B thread also gets two refs, so lead to one more inode ref. So add mutex lock to avoid multi thread set two inode ref once at the same time. Signed-off-by: jiangyiwen <jiangyiwen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03ocfs2: revert iput deferring code in ocfs2_drop_dentry_lockGoldwyn Rodrigues
The following patches are reverted in this patch because these patches caused performance regression in the remote unlink() calls. ea455f8ab683 - ocfs2: Push out dropping of dentry lock to ocfs2_wq f7b1aa69be13 - ocfs2: Fix deadlock on umount 5fd131893793 - ocfs2: Don't oops in ocfs2_kill_sb on a failed mount Previous patches in this series removed the possible deadlocks from downconvert thread so the above patches shouldn't be needed anymore. The regression is caused because these patches delay the iput() in case of dentry unlocks. This also delays the unlocking of the open lockres. The open lockresource is required to test if the inode can be wiped from disk or not. When the deleting node does not get the open lock, it marks it as orphan (even though it is not in use by another node/process) and causes a journal checkpoint. This delays operations following the inode eviction. This also moves the inode to the orphaned inode which further causes more I/O and a lot of unneccessary orphans. The following script can be used to generate the load causing issues: declare -a create declare -a remove declare -a iterations=(1 2 4 8 16 32 64 128 256 512 1024 2048 4096 8192 16384) unique="`mktemp -u XXXXX`" script="/tmp/idontknow-${unique}.sh" cat <<EOF > "${script}" for n in {1..8}; do mkdir -p test/dir\${n} eval touch test/dir\${n}/foo{1.."\$1"} done EOF chmod 700 "${script}" function fcreate () { exec 2>&1 /usr/bin/time --format=%E "${script}" "$1" } function fremove () { exec 2>&1 /usr/bin/time --format=%E ssh node2 "cd `pwd`; rm -Rf test*" } function fcp () { exec 2>&1 /usr/bin/time --format=%E ssh node3 "cd `pwd`; cp -R test test.new" } echo ------------------------------------------------- echo "| # files | create #s | copy #s | remove #s |" echo ------------------------------------------------- for ((x=0; x < ${#iterations[*]} ; x++)) do create[$x]="`fcreate ${iterations[$x]}`" copy[$x]="`fcp ${iterations[$x]}`" remove[$x]="`fremove`" printf "| %8d | %9s | %9s | %9s |\n" ${iterations[$x]} ${create[$x]} ${copy[$x]} ${remove[$x]} done rm "${script}" echo "------------------------" Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03ocfs2: implement delayed dropping of last dquot referenceJan Kara
We cannot drop last dquot reference from downconvert thread as that creates the following deadlock: NODE 1 NODE2 holds dentry lock for 'foo' holds inode lock for GLOBAL_BITMAP_SYSTEM_INODE dquot_initialize(bar) ocfs2_dquot_acquire() ocfs2_inode_lock(USER_QUOTA_SYSTEM_INODE) ... downconvert thread (triggered from another node or a different process from NODE2) ocfs2_dentry_post_unlock() ... iput(foo) ocfs2_evict_inode(foo) ocfs2_clear_inode(foo) dquot_drop(inode) ... ocfs2_dquot_release() ocfs2_inode_lock(USER_QUOTA_SYSTEM_INODE) - blocks finds we need more space in quota file ... ocfs2_extend_no_holes() ocfs2_inode_lock(GLOBAL_BITMAP_SYSTEM_INODE) - deadlocks waiting for downconvert thread We solve the problem by postponing dropping of the last dquot reference to a workqueue if it happens from the downconvert thread. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03ocfs2: improve fsync efficiency and fix deadlock between aio_write and sync_fileDarrick J. Wong
Currently, ocfs2_sync_file grabs i_mutex and forces the current journal transaction to complete. This isn't terribly efficient, since sync_file really only needs to wait for the last transaction involving that inode to complete, and this doesn't require i_mutex. Therefore, implement the necessary bits to track the newest tid associated with an inode, and teach sync_file to wait for that instead of waiting for everything in the journal to commit. Furthermore, only issue the flush request to the drive if jbd2 hasn't already done so. This also eliminates the deadlock between ocfs2_file_aio_write() and ocfs2_sync_file(). aio_write takes i_mutex then calls ocfs2_aiodio_wait() to wait for unaligned dio writes to finish. However, if that dio completion involves calling fsync, then we can get into trouble when some ocfs2_sync_file tries to take i_mutex. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03ocfs2: remove unused variable uuid_net_key in ocfs2_initialize_superjoyce.xue
Variable uuid_net_key in ocfs2_initialize_super() is not used. Clean it up. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Acked-by: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03ocfs2: change ip_unaligned_aio to of type mutex from atomit_tWengang Wang
There is a problem that waitqueue_active() may check stale data thus miss a wakeup of threads waiting on ip_unaligned_aio. The valid value of ip_unaligned_aio is only 0 and 1 so we can change it to be of type mutex thus the above prolem is avoid. Another benifit is that mutex which works as FIFO is fairer than wake_up_all(). Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-13fs: push sync_filesystem() down to the file system's remount_fs()Theodore Ts'o
Previously, the no-op "mount -o mount /dev/xxx" operation when the file system is already mounted read-write causes an implied, unconditional syncfs(). This seems pretty stupid, and it's certainly documented or guaraunteed to do this, nor is it particularly useful, except in the case where the file system was mounted rw and is getting remounted read-only. However, it's possible that there might be some file systems that are actually depending on this behavior. In most file systems, it's probably fine to only call sync_filesystem() when transitioning from read-write to read-only, and there are some file systems where this is not needed at all (for example, for a pseudo-filesystem or something like romfs). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-fsdevel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Jan Kara <jack@suse.cz> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Anders Larsen <al@alarsen.net> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: xfs@oss.sgi.com Cc: linux-btrfs@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: fuse-devel@lists.sourceforge.net Cc: cluster-devel@redhat.com Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux-nfs@vger.kernel.org Cc: linux-nilfs@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: reiserfs-devel@vger.kernel.org
2014-01-21ocfs2: fix NULL pointer dereference when dismount and ocfs2rec simultaneouslyYiwen Jiang
2 nodes cluster, say Node A and Node B, mount the same ocfs2 volume, and create a file 1. Node A Node B open 1, get open lock rm 1, and then add 1 to orphan_dir storage link down, o2hb_write_timeout ->o2quo_disk_timeout ->emergency_restart at the moment, Node B dismount and do ocfs2rec simultaneously 1) ocfs2_dismount_volume ->ocfs2_recovery_exit ->wait_event(osb->recovery_event) ->flush_workqueue(ocfs2_wq) 2) ocfs2rec ->queue_work(&journal->j_recovery_work) ->ocfs2_recover_orphans ->ocfs2_commit_truncate ->queue_delayed_work(&osb->osb_truncate_log_wq) In ocfs2_recovery_exit, it flushes workqueue and then releases system inodes. When doing ocfs2rec, it will call ocfs2_flush_truncate_log which will try to get sys_root_inode, and NULL pointer dereference occurs. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: joyce <xuejiufei@huawei.com> Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21ocfs2: add clustername to cluster connectionGoldwyn Rodrigues
This is an effort of removing ocfs2_controld.pcmk and getting ocfs2 DLM handling up to the times with respect to DLM (>=4.0.1) and corosync (2.3.x). AFAIK, cman also is being phased out for a unified corosync cluster stack. fs/dlm performs all the functions with respect to fencing and node management and provides the API's to do so for ocfs2. For all future references, DLM stands for fs/dlm code. The advantages are: + No need to run an additional userspace daemon (ocfs2_controld) + No controld device handling and controld protocol + Shifting responsibilities of node management to DLM layer For backward compatibility, we are keeping the controld handling code. Once enough time has passed we can remove a significant portion of the code. This was tested by using the kernel with changes on older unmodified tools. The kernel used ocfs2_controld as expected, and displayed the appropriate warning message. This feature requires modification in the userspace ocfs2-tools. The changes can be found at: https://github.com/goldwynr/ocfs2-tools branch: nocontrold Currently, not many checks are present in the userspace code, but that would change soon. This patch (of 6): Add clustername to cluster connection. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21ocfs2: remove versioning informationGoldwyn Rodrigues
The versioning information is confusing for end-users. The numbers are stuck at 1.5.0 when the tools version have moved to 1.8.2. Remove the versioning system in the OCFS2 modules and let the kernel version be the guide to debug issues. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: return ENOMEM when sb_getblk() failsRui Xiang
The only reason for sb_getblk() failing is if it can't allocate the buffer_head. So return ENOMEM instead when it fails. [joseph.qi@huawei.com: ocfs2_symlink_get_block() and ocfs2_read_blocks_sync() and ocfs2_read_blocks() need the same change] Signed-off-by: Rui Xiang <rui.xiang@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24fs/ocfs2/super.c: use a bigger nodestr in ocfs2_dismount_volumeGoldwyn Rodrigues
While printing 32-bit node numbers, an 8-byte string is not enough. Increase the size of the string to 12 chars. This got left out in commit 49fa8140e487 ("fs/ocfs2/super.c: Use bigger nodestr to accomodate 32-bit node numbers"). Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-28fs/ocfs2/super.c: Use bigger nodestr to accomodate 32-bit node numbersGoldwyn Rodrigues
While using pacemaker/corosync, the node numbers are generated using IP address as opposed to serial node number generation. This may not fit in a 8-byte string. Use a bigger string to print the complete node number. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: remove unecessary variable needs_checkpointGoldwyn Rodrigues
Code cleanup: needs_checkpoint is assigned to but never used. Delete the variable. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Jeff Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-07fs: Limit sys_mount to only request filesystem modules (Part 2).Eric W. Biederman
Add missing MODULE_ALIAS_FS("ocfs2") how did I miss that? Remove unnecessary MODULE_ALIAS_FS("devpts") devpts can not be modular. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-21ocfs2: remove kfree() redundant null checksTim Gardner
smatch analysis indicates a number of redundant NULL checks before calling kfree(), eg: fs/ocfs2/alloc.c:6138 ocfs2_begin_truncate_log_recovery() info: redundant null check on *tl_copy calling kfree() fs/ocfs2/alloc.c:6755 ocfs2_zero_range_for_truncate() info: redundant null check on pages calling kfree() etc.... [akpm@linux-foundation.org: revert dubious change in ocfs2_begin_truncate_log_recovery()] Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-02fs: push rcu_barrier() from deactivate_locked_super() to filesystemsKirill A. Shutemov
There's no reason to call rcu_barrier() on every deactivate_locked_super(). We only need to make sure that all delayed rcu free inodes are flushed before we destroy related cache. Removing rcu_barrier() from deactivate_locked_super() affects some fast paths. E.g. on my machine exit_group() of a last process in IPC namespace takes 0.07538s. rcu_barrier() takes 0.05188s of that time. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20ocfs2: fix leaks on failure exits in module_initAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20switch open-coded instances of d_make_root() to new helperAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20... and the same failure exits cleanup for ocfs2Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-06vfs: switch ->show_options() to struct dentry *Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: fix the stupidity with i_dentry in inode destructorsAl Viro
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once(); the cost of taking it into inode_init_always() will be negligible for pipes and sockets and negative for everything else. Not to mention the removal of boilerplate code from ->destroy_inode() instances... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-17ocfs2: send correct UUID to cleancache initializationDan Magenheimer
ocfs2: Fix cleancache initialization call to correctly pass uuid As reported by Steven Whitehouse in https://lkml.org/lkml/2011/5/27/221 the ocfs2 volume UUID is incorrectly passed to cleancache. As a result, shared-ephemeral tmem pools will not actually be created; instead they will be private (unshared) which misses out on a major benefit of tmem. Reported-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-29 04:06:15 +0000