summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-27Linux 3.2.42v3.2.42Ben Hutchings
2013-03-27kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORERAndrew Morton
commit 522cff142d7d2f9230839c9e1f21a4d8bcc22a4a upstream. __ARCH_HAS_SA_RESTORER is the preferred conditional for use in 3.9 and later kernels, per Kees. Cc: Emese Revfy <re.emese@gmail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27signal: Define __ARCH_HAS_SA_RESTORER so we know whether to clear sa_restorerBen Hutchings
flush_signal_handlers() needs to know whether sigaction::sa_restorer is defined, not whether SA_RESTORER is defined. Define the __ARCH_HAS_SA_RESTORER macro to indicate this. Vaguely based on upstream commit 574c4866e33d 'consolidate kernel-side struct sigaction declarations'. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk>
2013-03-27efivars: pstore: Do not check size when erasing variableBen Hutchings
In 3.2, unlike mainline, efi_pstore_erase() calls efi_pstore_write() with a size of 0, as the underlying EFI interface treats a size of 0 as meaning deletion. This was not taken into account in my backport of commit d80a361d779a 'efi_pstore: Check remaining space with QueryVariableInfo() before writing data'. The size check should be omitted when erasing. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27KMS: fix EDID detailed timing frame rateTorsten Duwe
commit c19b3b0f6eed552952845e4ad908dba2113d67b4 upstream. When KMS has parsed an EDID "detailed timing", it leaves the frame rate zeroed. Consecutive (debug-) output of that mode thus yields 0 for vsync. This simple fix also speeds up future invocations of drm_mode_vrefresh(). While it is debatable whether this qualifies as a -stable fix I'd apply it for consistency's sake; drm_helper_probe_single_connector_modes() does the same thing already for all probed modes. Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27KMS: fix EDID detailed timing vsync parsingTorsten Duwe
commit 16dad1d743d31a104a849c8944e6b9eb479f6cd7 upstream. EDID spreads some values across multiple bytes; bit-fiddling is needed to retrieve these. The current code to parse "detailed timings" has a cut&paste error that results in a vsync offset of at most 15 lines instead of 63. See http://en.wikipedia.org/wiki/EDID and in the "EDID Detailed Timing Descriptor" see bytes 10+11 show why that needs to be a left shift. Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit ↵Wanpeng Li
accouting commit d00285884c0892bb1310df96bce6056e9ce9b9d9 upstream. hugetlb_total_pages is used for overcommit calculations but the current implementation considers only the default hugetlb page size (which is either the first defined hugepage size or the one specified by default_hugepagesz kernel boot parameter). If the system is configured for more than one hugepage size, which is possible since commit a137e1cc6d6e ("hugetlbfs: per mount huge page sizes") then the overcommit estimation done by __vm_enough_memory() (resp. shown by meminfo_proc_show) is not precise - there is an impression of more available/allowed memory. This can lead to an unexpected ENOMEM/EFAULT resp. SIGSEGV when memory is accounted. Testcase: boot: hugepagesz=1G hugepages=1 the default overcommit ratio is 50 before patch: egrep 'CommitLimit' /proc/meminfo CommitLimit: 55434168 kB after patch: egrep 'CommitLimit' /proc/meminfo CommitLimit: 54909880 kB [akpm@linux-foundation.org: coding-style tweak] Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27vfs,proc: guarantee unique inodes in /procLinus Torvalds
commit 51f0885e5415b4cc6535e9cdcc5145bfbc134353 upstream. Dave Jones found another /proc issue with his Trinity tool: thanks to the namespace model, we can have multiple /proc dentries that point to the same inode, aliasing directories in /proc/<pid>/net/ for example. This ends up being a total disaster, because it acts like hardlinked directories, and causes locking problems. We rely on the topological sort of the inodes pointed to by dentries, and if we have aliased directories, that odering becomes unreliable. In short: don't do this. Multiple dentries with the same (directory) inode is just a bad idea, and the namespace code should never have exposed things this way. But we're kind of stuck with it. This solves things by just always allocating a new inode during /proc dentry lookup, instead of using "iget_locked()" to look up existing inodes by superblock and number. That actually simplies the code a bit, at the cost of potentially doing more inode [de]allocations. That said, the inode lookup wasn't free either (and did a lot of locking of inodes), so it is probably not that noticeable. We could easily keep the old lookup model for non-directory entries, but rather than try to be excessively clever this just implements the minimal and simplest workaround for the problem. Reported-and-tested-by: Dave Jones <davej@redhat.com> Analyzed-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: - Adjust context - Never drop the pde reference in proc_get_inode(), as callers only expect this when we return an existing inode, and we never do that now] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27i2c: tegra: check the clk_prepare_enable() return valueLaxman Dewangan
commit 132c803f7b70b17322579f6f4f3f65cf68e55135 upstream. NVIDIA's Tegra SoC allows read/write of controller register only if controller clock is enabled. System hangs if read/write happens to registers without enabling clock. clk_prepare_enable() can be fail due to unknown reason and hence adding check for return value of this function. If this function success then only access register otherwise return to caller with error. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> [bwh: Backported to 3.2: - Adjust context - Keep calling clk_enable() directly] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27USB: serial: fix interface refcountingJohan Hovold
commit d7971051e4df825e0bc11b995e87bfe86355b8e5 upstream. Make sure the interface is not released before our serial device. Note that drivers are still not allowed to access the interface in any way that may interfere with another driver that may have gotten bound to the same interface after disconnect returns. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27USB: io_ti: fix get_icount for two port adaptersJohan Hovold
commit 5492bf3d5655b4954164f69c02955a7fca267611 upstream. Add missing get_icount field to two-port driver. The two-port driver was not updated when switching to the new icount interface in commit 0bca1b913aff ("tty: Convert the USB drivers to the new icount interface"). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27USB: garmin_gps: fix memory leak on disconnectJohan Hovold
commit 618aa1068df29c37a58045fe940f9106664153fd upstream. Remove bogus disconnect test introduced by 95bef012e ("USB: more serial drivers writing after disconnect") which prevented queued data from being freed on disconnect. The possible IO it was supposed to prevent is long gone. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27cifs: ignore everything in SPNEGO blob after mechTypesJeff Layton
commit f853c616883a8de966873a1dab283f1369e275a1 upstream. We've had several reports of people attempting to mount Windows 8 shares and getting failures with a return code of -EINVAL. The default sec= mode changed recently to sec=ntlmssp. With that, we expect and parse a SPNEGO blob from the server in the NEGOTIATE reply. The current decode_negTokenInit function first parses all of the mechTypes and then tries to parse the rest of the negTokenInit reply. The parser however currently expects a mechListMIC or nothing to follow the mechTypes, but Windows 8 puts a mechToken field there instead to carry some info for the new NegoEx stuff. In practice, we don't do anything with the fields after the mechTypes anyway so I don't see any real benefit in continuing to parse them. This patch just has the kernel ignore the fields after the mechTypes. We'll probably need to reinstate some of this if we ever want to support NegoEx. Reported-by: Jason Burgess <jason@jacknife2.dns2go.com> Reported-by: Yan Li <elliot.li.tech@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27efivars: Handle duplicate names from get_next_variable()Matt Fleming
commit e971318bbed610e28bb3fde9d548e6aaf0a6b02e upstream. Some firmware exhibits a bug where the same VariableName and VendorGuid values are returned on multiple invocations of GetNextVariableName(). See, https://bugzilla.kernel.org/show_bug.cgi?id=47631 As a consequence of such a bug, Andre reports hitting the following WARN_ON() in the sysfs code after updating the BIOS on his, "Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77X-UD3H, BIOS F19e 11/21/2012)" machine, [ 0.581554] EFI Variables Facility v0.08 2004-May-17 [ 0.584914] ------------[ cut here ]------------ [ 0.585639] WARNING: at /home/andre/linux/fs/sysfs/dir.c:536 sysfs_add_one+0xd4/0x100() [ 0.586381] Hardware name: To be filled by O.E.M. [ 0.587123] sysfs: cannot create duplicate filename '/firmware/efi/vars/SbAslBufferPtrVar-01f33c25-764d-43ea-aeea-6b5a41f3f3e8' [ 0.588694] Modules linked in: [ 0.589484] Pid: 1, comm: swapper/0 Not tainted 3.8.0+ #7 [ 0.590280] Call Trace: [ 0.591066] [<ffffffff81208954>] ? sysfs_add_one+0xd4/0x100 [ 0.591861] [<ffffffff810587bf>] warn_slowpath_common+0x7f/0xc0 [ 0.592650] [<ffffffff810588bc>] warn_slowpath_fmt+0x4c/0x50 [ 0.593429] [<ffffffff8134dd85>] ? strlcat+0x65/0x80 [ 0.594203] [<ffffffff81208954>] sysfs_add_one+0xd4/0x100 [ 0.594979] [<ffffffff81208b78>] create_dir+0x78/0xd0 [ 0.595753] [<ffffffff81208ec6>] sysfs_create_dir+0x86/0xe0 [ 0.596532] [<ffffffff81347e4c>] kobject_add_internal+0x9c/0x220 [ 0.597310] [<ffffffff81348307>] kobject_init_and_add+0x67/0x90 [ 0.598083] [<ffffffff81584a71>] ? efivar_create_sysfs_entry+0x61/0x1c0 [ 0.598859] [<ffffffff81584b2b>] efivar_create_sysfs_entry+0x11b/0x1c0 [ 0.599631] [<ffffffff8158517e>] register_efivars+0xde/0x420 [ 0.600395] [<ffffffff81d430a7>] ? edd_init+0x2f5/0x2f5 [ 0.601150] [<ffffffff81d4315f>] efivars_init+0xb8/0x104 [ 0.601903] [<ffffffff8100215a>] do_one_initcall+0x12a/0x180 [ 0.602659] [<ffffffff81d05d80>] kernel_init_freeable+0x13e/0x1c6 [ 0.603418] [<ffffffff81d05586>] ? loglevel+0x31/0x31 [ 0.604183] [<ffffffff816a6530>] ? rest_init+0x80/0x80 [ 0.604936] [<ffffffff816a653e>] kernel_init+0xe/0xf0 [ 0.605681] [<ffffffff816ce7ec>] ret_from_fork+0x7c/0xb0 [ 0.606414] [<ffffffff816a6530>] ? rest_init+0x80/0x80 [ 0.607143] ---[ end trace 1609741ab737eb29 ]--- There's not much we can do to work around and keep traversing the variable list once we hit this firmware bug. Our only solution is to terminate the loop because, as Lingzhu reports, some machines get stuck when they encounter duplicate names, > I had an IBM System x3100 M4 and x3850 X5 on which kernel would > get stuck in infinite loop creating duplicate sysfs files because, > for some reason, there are several duplicate boot entries in nvram > getting GetNextVariableName into a circle of iteration (with > period > 2). Also disable the workqueue, as efivar_update_sysfs_entries() uses GetNextVariableName() to figure out which variables have been created since the last iteration. That algorithm isn't going to work if GetNextVariableName() returns duplicates. Note that we don't disable EFI variable creation completely on the affected machines, it's just that any pstore dump-* files won't appear in sysfs until the next boot. Reported-by: Andre Heider <a.heider@gmail.com> Reported-by: Lingzhu Xiang <lxiang@redhat.com> Tested-by: Lingzhu Xiang <lxiang@redhat.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> [bwh: Backported to 3.2: reason is not checked in efi_pstore_write()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27efivars: explicitly calculate length of VariableNameMatt Fleming
commit ec50bd32f1672d38ddce10fb1841cbfda89cfe9a upstream. It's not wise to assume VariableNameSize represents the length of VariableName, as not all firmware updates VariableNameSize in the same way (some don't update it at all if EFI_SUCCESS is returned). There are even implementations out there that update VariableNameSize with values that are both larger than the string returned in VariableName and smaller than the buffer passed to GetNextVariableName(), which resulted in the following bug report from Michael Schroeder, > On HP z220 system (firmware version 1.54), some EFI variables are > incorrectly named : > > ls -d /sys/firmware/efi/vars/*8be4d* | grep -v -- -8be returns > /sys/firmware/efi/vars/dbxDefault-pport8be4df61-93ca-11d2-aa0d-00e098032b8c > /sys/firmware/efi/vars/KEKDefault-pport8be4df61-93ca-11d2-aa0d-00e098032b8c > /sys/firmware/efi/vars/SecureBoot-pport8be4df61-93ca-11d2-aa0d-00e098032b8c > /sys/firmware/efi/vars/SetupMode-Information8be4df61-93ca-11d2-aa0d-00e098032b8c The issue here is that because we blindly use VariableNameSize without verifying its value, we can potentially read garbage values from the buffer containing VariableName if VariableNameSize is larger than the length of VariableName. Since VariableName is a string, we can calculate its size by searching for the terminating NULL character. Reported-by: Frederic Crozat <fcrozat@suse.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Michael Schroeder <mls@suse.com> Cc: Lee, Chun-Yi <jlee@suse.com> Cc: Lingzhu Xiang <lxiang@redhat.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27efi_pstore: Introducing workqueue updating sysfsSeiji Aguchi
commit a93bc0c6e07ed9bac44700280e65e2945d864fd4 upstream. [Problem] efi_pstore creates sysfs entries, which enable users to access to NVRAM, in a write callback. If a kernel panic happens in an interrupt context, it may fail because it could sleep due to dynamic memory allocations during creating sysfs entries. [Patch Description] This patch removes sysfs operations from a write callback by introducing a workqueue updating sysfs entries which is scheduled after the write callback is called. Also, the workqueue is kicked in a just oops case. A system will go down in other cases such as panic, clean shutdown and emergency restart. And we don't need to create sysfs entries because there is no chance for users to access to them. efi_pstore will be robust against a kernel panic in an interrupt context with this patch. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> [bwh: Backported to 3.2: - Adjust contest - Don't check reason in efi_pstore_write(), as it is not given as a parameter - Move up declaration of __efivars] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27efivars: Fix check for CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLEBen Hutchings
commit ca0ba26fbbd2d81c43085df49ce0abfe34535a90 upstream. The 'CONFIG_' prefix is not implicit in IS_ENABLED(). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-27efivars: Add module parameter to disable use as a pstore backendSeth Forshee
commit ec0971ba5372a4dfa753f232449d23a8fd98490e upstream. We know that with some firmware implementations writing too much data to UEFI variables can lead to bricking machines. Recent changes attempt to address this issue, but for some it may still be prudent to avoid writing large amounts of data until the solution has been proven on a wide variety of hardware. Crash dumps or other data from pstore can potentially be a large data source. Add a pstore_module parameter to efivars to allow disabling its use as a backend for pstore. Also add a config option, CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE, to allow setting the default value of this paramter to true (i.e. disabled by default). Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27efivars: Allow disabling use as a pstore backendSeth Forshee
commit ed9dc8ce7a1c8115dba9483a9b51df8b63a2e0ef upstream. Add a new option, CONFIG_EFI_VARS_PSTORE, which can be set to N to avoid using efivars as a backend to pstore, as some users may want to compile out the code completely. Set the default to Y to maintain backwards compatability, since this feature has always been enabled until now. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27dm thin: fix discard corruptionJoe Thornber
commit f046f89a99ccfd9408b94c653374ff3065c7edb3 upstream. Fix a bug in dm_btree_remove that could leave leaf values with incorrect reference counts. The effect of this was that removal of a shared block could result in the space maps thinking the block was no longer used. More concretely, if you have a thin device and a snapshot of it, sending a discard to a shared region of the thin could corrupt the snapshot. Thinp uses a 2-level nested btree to store it's mappings. This first level is indexed by thin device, and the second level by logical block. Often when we're removing an entry in this mapping tree we need to rebalance nodes, which can involve shadowing them, possibly creating a copy if the block is shared. If we do create a copy then children of that node need to have their reference counts incremented. In this way reference counts percolate down the tree as shared trees diverge. The rebalance functions were incrementing the children at the appropriate time, but they were always assuming the children were internal nodes. This meant the leaf values (in our case packed block/flags entries) were not being incremented. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> [bwh: Backported to 3.2: bump target version numbers from 1.0.1 to 1.0.2] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27usb: gadget: udc-core: fix a regression during gadget driver unbindingAlan Stern
commit 511f3c5326eabe1ece35202a404c24c0aeacc246 upstream. This patch (as1666) fixes a regression in the UDC core. The core takes care of unbinding gadget drivers, and it does the unbinding before telling the UDC driver to turn off the controller hardware. When the call to the udc_stop callback is made, the gadget no longer has a driver. The callback routine should not be invoked with a pointer to the old driver; doing so can cause problems (such as use-after-free accesses in net2280). This patch should be applied, with appropriate context changes, to all the stable kernels going back to 3.1. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com> [bwh: Backported to 3.2: adjust context, indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27ALSA: hda - Fix typo in checking IEC958 emphasis bitTakashi Iwai
commit a686fd141e20244ad75f80ad54706da07d7bb90a upstream. There is a typo in convert_to_spdif_status() about checking the emphasis IEC958 status bit. It should check the given value instead of the resultant value. Reported-by: Martin Weishart <martin.weishart@telosalliance.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27ext4: fix data=journal fast mount/umount hangTheodore Ts'o
commit 2b405bfa84063bfa35621d2d6879f52693c614b0 upstream. In data=journal mode, if we unmount the file system before a transaction has a chance to complete, when the journal inode is being evicted, we can end up calling into jbd2_log_wait_commit() for the last transaction, after the journalling machinery has been shut down. Arguably we should adjust ext4_should_journal_data() to return FALSE for the journal inode, but the only place it matters is ext4_evict_inode(), and so to save a bit of CPU time, and to make the patch much more obviously correct by inspection(tm), we'll fix it by explicitly not trying to waiting for a journal commit when we are evicting the journal inode, since it's guaranteed to never succeed in this case. This can be easily replicated via: mount -t ext4 -o data=journal /dev/vdb /vdb ; umount /vdb ------------[ cut here ]------------ WARNING: at /usr/projects/linux/ext4/fs/jbd2/journal.c:542 __jbd2_log_start_commit+0xba/0xcd() Hardware name: Bochs JBD2: bad log_start_commit: 3005630206 3005630206 0 0 Modules linked in: Pid: 2909, comm: umount Not tainted 3.8.0-rc3 #1020 Call Trace: [<c015c0ef>] warn_slowpath_common+0x68/0x7d [<c02b7e7d>] ? __jbd2_log_start_commit+0xba/0xcd [<c015c177>] warn_slowpath_fmt+0x2b/0x2f [<c02b7e7d>] __jbd2_log_start_commit+0xba/0xcd [<c02b8075>] jbd2_log_start_commit+0x24/0x34 [<c0279ed5>] ext4_evict_inode+0x71/0x2e3 [<c021f0ec>] evict+0x94/0x135 [<c021f9aa>] iput+0x10a/0x110 [<c02b7836>] jbd2_journal_destroy+0x190/0x1ce [<c0175284>] ? bit_waitqueue+0x50/0x50 [<c028d23f>] ext4_put_super+0x52/0x294 [<c020efe3>] generic_shutdown_super+0x48/0xb4 [<c020f071>] kill_block_super+0x22/0x60 [<c020f3e0>] deactivate_locked_super+0x22/0x49 [<c020f5d6>] deactivate_super+0x30/0x33 [<c0222795>] mntput_no_expire+0x107/0x10c [<c02233a7>] sys_umount+0x2cf/0x2e0 [<c02233ca>] sys_oldumount+0x12/0x14 [<c08096b8>] syscall_call+0x7/0xb ---[ end trace 6a954cc790501c1f ]--- jbd2_log_wait_commit: error: j_commit_request=-1289337090, tid=0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27ALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls()Daniel Mack
commit 83ea5d18d74f032a760fecde78c0210f66f7f70c upstream. Creation of individual mixer controls may fail, but that shouldn't cause the entire mixer creation to fail. Even worse, if the mixer creation fails, that will error out the entire device probing. All the functions called by parse_audio_unit() should return -EINVAL if they find descriptors that are unsupported or believed to be malformed, so we can safely handle this error code as a non-fatal condition in snd_usb_mixer_controls(). That fixes a long standing bug which is commonly worked around by adding quirks which make the driver ignore entire interfaces. Some of them might now be unnecessary. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Rodolfo Thomazelli <pe.soberbo@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27ALSA: snd-usb: mixer: propagate errors up the call chainDaniel Mack
commit 4d7b86c98e445b075c2c4c3757eb6d3d6efbe72e upstream. In check_input_term() and parse_audio_feature_unit(), propagate the error value that has been returned by a failing function instead of -EINVAL. That helps cleaning up the error pathes in the mixer. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27x86-64: Fix the failure case in copy_user_handle_tail()CQ Tang
commit 66db3feb486c01349f767b98ebb10b0c3d2d021b upstream. The increment of "to" in copy_user_handle_tail() will have incremented before a failure has been noted. This causes us to skip a byte in the failure case. Only do the increment when assured there is no failure. Signed-off-by: CQ Tang <cq.tang@intel.com> Link: http://lkml.kernel.org/r/20130318150221.8439.993.stgit@phlsvslse11.ph.intel.com Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27USB: xhci - fix bit definitions for IMAN registerDmitry Torokhov
commit f8264340e694604863255cc0276491d17c402390 upstream. According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1 of IMAN register. Previously their definitions were reversed. Even though there are no ill effects being observed from the swapped definitions (because IMAN_IP is RW1C and in legacy PCI case we come in with it already set to 1 so it was clearing itself even though we were setting IMAN_IE instead of IMAN_IP), we should still correct the values. This patch should be backported to kernels as old as 2.6.36, that contain the commit 4e833c0b87a30798e67f06120cecebef6ee9644c "xhci: don't re-enable IE constantly". Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27ALSA: hda/cirrus - Fix the digital beep registrationTakashi Iwai
commit a86b1a2cd2f81f74e815e07f756edd7bc5b6f034 upstream. The argument passed to snd_hda_attach_beep_device() is a widget NID while spec->beep_amp holds the composed value for amp controls. Signed-off-by: Takashi Iwai <tiwai@suse.de> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27drm/radeon/benchmark: make sure bo blit copy exists before using itAlex Deucher
commit fa8d387dc3f62062a6b4afbbb2a3438094fd8584 upstream. Fixes a segfault on asics without a blit callback. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=62239 Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> [bwh: Backported to 3.2: s/copy\.blit/copy_blit/] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27usb-storage: add unusual_devs entry for Samsung YP-Z3 mp3 playerDmitry Artamonow
commit 29f86e66428ee083aec106cca1748dc63d98ce23 upstream. Device stucks on filesystem writes, unless following quirk is passed: echo 04e8:5136:m > /sys/module/usb_storage/parameters/quirks Add corresponding entry to unusual_devs.h Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27USB: xhci: correctly enable interruptsHannes Reinecke
commit 00eed9c814cb8f281be6f0f5d8f45025dc0a97eb upstream. xhci has its own interrupt enabling routine, which will try to use MSI-X/MSI if present. So the usb core shouldn't try to enable legacy interrupts; on some machines the xhci legacy IRQ setting is invalid. v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn) Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Frederik Himpe <fhimpe@vub.ac.be> Cc: David Haerdeman <david@hardeman.nu> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27tracing: Prevent buffer overwrite disabled for latency tracersSteven Rostedt (Red Hat)
commit 613f04a0f51e6e68ac6fe571ab79da3c0a5eb4da upstream. The latency tracers require the buffers to be in overwrite mode, otherwise they get screwed up. Force the buffers to stay in overwrite mode when latency tracers are enabled. Added a flag_changed() method to the tracer structure to allow the tracers to see what flags are being changed, and also be able to prevent the change from happing. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> [bwh: Backported to 3.2: - Adjust context - Drop some changes that are not needed because trace_set_options() is not separate from tracing_trace_options_write()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27tracing: Keep overwrite in sync between regular and snapshot buffersSteven Rostedt (Red Hat)
commit 80902822658aab18330569587cdb69ac1dfdcea8 upstream. Changing the overwrite mode for the ring buffer via the trace option only sets the normal buffer. But the snapshot buffer could swap with it, and then the snapshot would be in non overwrite mode and the normal buffer would be in overwrite mode, even though the option flag states otherwise. Keep the two buffers overwrite modes in sync. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27tracing: Protect tracer flags with trace_types_lockSteven Rostedt (Red Hat)
commit 69d34da2984c95b33ea21518227e1f9470f11d95 upstream. Seems that the tracer flags have never been protected from synchronous writes. Luckily, admins don't usually modify the tracing flags via two different tasks. But if scripts were to be used to modify them, then they could get corrupted. Move the trace_types_lock that protects against tracers changing to also protect the flags being set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> [bwh: Backported to 3.2: also move failure return in tracing_trace_options_write() after unlocking] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27tracing: Fix free of probe entry by calling call_rcu_sched()Steven Rostedt (Red Hat)
commit 740466bc89ad8bd5afcc8de220f715f62b21e365 upstream. Because function tracing is very invasive, and can even trace calls to rcu_read_lock(), RCU access in function tracing is done with preempt_disable_notrace(). This requires a synchronize_sched() for updates and not a synchronize_rcu(). Function probes (traceon, traceoff, etc) must be freed after a synchronize_sched() after its entry has been removed from the hash. But call_rcu() is used. Fix this by using call_rcu_sched(). Also fix the usage to use hlist_del_rcu() instead of hlist_del(). Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27drm/i915: bounds check execbuffer relocation countKees Cook
commit 3118a4f652c7b12c752f3222af0447008f9b2368 upstream. It is possible to wrap the counter used to allocate the buffer for relocation copies. This could lead to heap writing overflows. CVE-2013-0913 v3: collapse test, improve comment v2: move check into validate_exec_list Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Pinkie Pie Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27drm/i915: restrict kernel address leak in debugfsKees Cook
commit 2563a4524febe8f4a98e717e02436d1aaf672aa2 upstream. Masks kernel address info-leak in object dumps with the %pK suffix, so they cannot be used to target kernel memory corruption attacks if the kptr_restrict sysctl is set. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: the rest of the format string is different] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27cifs: delay super block destruction until all cifsFileInfo objects are goneMateusz Guzik
commit 24261fc23db950951760d00c188ba63cc756b932 upstream. cifsFileInfo objects hold references to dentries and it is possible that these will still be around in workqueues when VFS decides to kill super block during unmount. This results in panics like this one: BUG: Dentry ffff88001f5e76c0{i=66b4a,n=1M-2} still in use (1) [unmount of cifs cifs] ------------[ cut here ]------------ kernel BUG at fs/dcache.c:943! [..] Process umount (pid: 1781, threadinfo ffff88003d6e8000, task ffff880035eeaec0) [..] Call Trace: [<ffffffff811b44f3>] shrink_dcache_for_umount+0x33/0x60 [<ffffffff8119f7fc>] generic_shutdown_super+0x2c/0xe0 [<ffffffff8119f946>] kill_anon_super+0x16/0x30 [<ffffffffa036623a>] cifs_kill_sb+0x1a/0x30 [cifs] [<ffffffff8119fcc7>] deactivate_locked_super+0x57/0x80 [<ffffffff811a085e>] deactivate_super+0x4e/0x70 [<ffffffff811bb417>] mntput_no_expire+0xd7/0x130 [<ffffffff811bc30c>] sys_umount+0x9c/0x3c0 [<ffffffff81657c19>] system_call_fastpath+0x16/0x1b Fix this by making each cifsFileInfo object hold a reference to cifs super block, which implicitly keeps VFS super block around as well. Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reported-and-Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Steve French <sfrench@us.ibm.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27tracing: Fix race in snapshot swappingSteven Rostedt (Red Hat)
commit 2721e72dd10f71a3ba90f59781becf02638aa0d9 upstream. Although the swap is wrapped with a spin_lock, the assignment of the temp buffer used to swap is not within that lock. It needs to be moved into that lock, otherwise two swaps happening on two different CPUs, can end up using the wrong temp buffer to assign in the swap. Luckily, all current callers of the swap function appear to have their own locks. But in case something is added that allows two different callers to call the swap, then there's a chance that this race can trigger and corrupt the buffers. New code is coming soon that will allow for this race to trigger. I've Cc'd stable, so this bug will not show up if someone backports one of the changes that can trigger this bug. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27ext4: use atomic64_t for the per-flexbg free_clusters countTheodore Ts'o
commit 90ba983f6889e65a3b506b30dc606aa9d1d46cd2 upstream. A user who was using a 8TB+ file system and with a very large flexbg size (> 65536) could cause the atomic_t used in the struct flex_groups to overflow. This was detected by PaX security patchset: http://forums.grsecurity.net/viewtopic.php?f=3&t=3289&p=12551#p12551 This bug was introduced in commit 9f24e4208f7e, so it's been around since 2.6.30. :-( Fix this by using an atomic64_t for struct orlav_stats's free_clusters. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Lukas Czerner <lczerner@redhat.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27ext4: convert number of blocks to clusters properlyLukas Czerner
commit 810da240f221d64bf90020f25941b05b378186fe upstream. We're using macro EXT4_B2C() to convert number of blocks to number of clusters for bigalloc file systems. However, we should be using EXT4_NUM_B2C(). Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> [bwh: Backported to 3.2: - Adjust context - Drop changes in ext4_setup_new_descs() and ext4_calculate_overhead()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27jbd2: fix use after free in jbd2_journal_dirty_metadata()Jan Kara
commit ad56edad089b56300fd13bb9eeb7d0424d978239 upstream. jbd2_journal_dirty_metadata() didn't get a reference to journal_head it was working with. This is OK in most of the cases since the journal head should be attached to a transaction but in rare occasions when we are journalling data, __ext4_journalled_writepage() can race with jbd2_journal_invalidatepage() stripping buffers from a page and thus journal head can be freed under hands of jbd2_journal_dirty_metadata(). Fix the problem by getting own journal head reference in jbd2_journal_dirty_metadata() (and also in jbd2_journal_set_triggers() which can possibly have the same issue). Reported-by: Zheng Liu <gnehzuil.liu@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27ext4: fix the wrong number of the allocated blocks in ext4_split_extent()Zheng Liu
commit 3a2256702e47f68f921dfad41b1764d05c572329 upstream. This commit fixes a wrong return value of the number of the allocated blocks in ext4_split_extent. When the length of blocks we want to allocate is greater than the length of the current extent, we return a wrong number. Let's see what happens in the following case when we call ext4_split_extent(). map: [48, 72] ex: [32, 64, u] 'ex' will be split into two parts: ex1: [32, 47, u] ex2: [48, 64, w] 'map->m_len' is returned from this function, and the value is 24. But the real length is 16. So it should be fixed. Meanwhile in this commit we use right length of the allocated blocks when get_reserved_cluster_alloc in ext4_ext_handle_uninitialized_extents is called. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27sfc: Only use TX push if a single descriptor is to be writtenBen Hutchings
[ Upstream commit fae8563b25f73dc584a07bcda7a82750ff4f7672 ] Using TX push when notifying the NIC of multiple new descriptors in the ring will very occasionally cause the TX DMA engine to re-use an old descriptor. This can result in a duplicated or partly duplicated packet (new headers with old data), or an IOMMU page fault. This does not happen when the pushed descriptor is the only one written. TX push also provides little latency benefit when a packet requires more than one descriptor. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27sfc: Disable soft interrupt handling during efx_device_detach_sync()Ben Hutchings
[ Upstream commit 35205b211c8d17a8a0b5e8926cb7c73e9a7ef1ad ] efx_device_detach_sync() locks all TX queues before marking the device detached and thus disabling further TX scheduling. But it can still be interrupted by TX completions which then result in TX scheduling in soft interrupt context. This will deadlock when it tries to acquire a TX queue lock that efx_device_detach_sync() already acquired. To avoid deadlock, we must use netif_tx_{,un}lock_bh(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27sfc: Detach net device when stopping queues for reconfigurationBen Hutchings
[ Upstream commit 29c69a4882641285a854d6d03ca5adbba68c0034 ] We must only ever stop TX queues when they are full or the net device is not 'ready' so far as the net core, and specifically the watchdog, is concerned. Otherwise, the watchdog may fire *immediately* if no packets have been added to the queue in the last 5 seconds. The device is ready if all the following are true: (a) It has a qdisc (b) It is marked present (c) It is running (d) The link is reported up (a) and (c) are normally true, and must not be changed by a driver. (d) is under our control, but fake link changes may disturb userland. This leaves (b). We already mark the device absent during reset and self-test, but we need to do the same during MTU changes and ring reallocation. We don't need to do this when the device is brought down because then (c) is already false. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27sfc: Fix efx_rx_buf_offset() in the presence of swiotlbBen Hutchings
[ Upstream commits 06e63c57acbb1df7c35ebe846ae416a8b88dfafa, b590ace09d51cd39744e0f7662c5e4a0d1b5d952 and c73e787a8db9117d59b5180baf83203a42ecadca ] We assume that the mapping between DMA and virtual addresses is done on whole pages, so we can find the page offset of an RX buffer using the lower bits of the DMA address. However, swiotlb maps in units of 2K, breaking this assumption. Add an explicit page_offset field to struct efx_rx_buffer. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27sfc: Properly sync RX DMA buffer when it is not the last in the pageBen Hutchings
[ Upstream commit 3a68f19d7afb80f548d016effbc6ed52643a8085 ] We may currently allocate two RX DMA buffers to a page, and only unmap the page when the second is completed. We do not sync the first RX buffer to be completed; this can result in packet loss or corruption if the last RX buffer completed in a NAPI poll is the first in a page and is not DMA-coherent. (In the middle of a NAPI poll, we will handle the following RX completion and unmap the page *before* looking at the content of the first buffer.) Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27sfc: Fix timekeeping in efx_mcdi_poll()Ben Hutchings
[ Upstream commit ebf98e797b4e26ad52ace1511a0b503ee60a6cd4 ] efx_mcdi_poll() uses get_seconds() to read the current time and to implement a polling timeout. The use of this function was chosen partly because it could easily be replaced in a co-sim environment with a macro that read the simulated time. Unfortunately the real get_seconds() returns the system time (real time) which is subject to adjustment by e.g. ntpd. If the system time is adjusted forward during a polled MCDI operation, the effective timeout can be shorter than the intended 10 seconds, resulting in a spurious failure. It is also possible for a backward adjustment to delay detection of a areal failure. Use jiffies instead, and change MCDI_RPC_TIMEOUT to be denominated in jiffies. Also correct rounding of the timeout: check time > finish (or rather time_after(time, finish)) and not time >= finish. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2013-03-27sfc: lock TX queues when calling netif_device_detach()Daniel Pieczko
[ Upstream commit c2f3b8e3a44b6fe9e36704e30157ebe1a88c08b1 ] The assertion of netif_device_present() at the top of efx_hard_start_xmit() may fail if we don't do this. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-27 16:17:42 +0000