summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-06-22Linux 3.0.36v3.0.36Greg Kroah-Hartman
2012-06-22USB: fix gathering of interface associationsDaniel Mack
commit b3a3dd074f7053ef824ad077e5331b52220ceba1 upstream. TEAC's UD-H01 (and probably other devices) have a gap in the interface number allocation of their descriptors: Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 220 bNumInterfaces 3 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 [...] Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 2 bInterfaceCount 2 bFunctionClass 1 Audio bFunctionSubClass 0 bFunctionProtocol 32 iFunction 4 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 [...] Once a configuration is selected, usb_set_configuration() walks the known interfaces of a given configuration and calls find_iad() on each of them to set the interface association pointer the interface is included in. The problem here is that the loop variable is taken for the interface number in the comparison logic that gathers the association. Which is fine as long as the descriptors are sane. In the case above, however, the logic gets out of sync and the interface association fields of all interfaces beyond the interface number gap are wrong. Fix this by passing the interface's bInterfaceNumber to find_iad() instead. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: bEN <ml_all@circa.be> Reported-by: Ivan Perrone <ivanperrone@hotmail.com> Tested-by: ivan perrone <ivanperrone@hotmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: serial: Enforce USB driver and USB serial driver matchBjørn Mork
commit 954c3f8a5f1b7716be9eee978b3bc85bae92d7c8 upstream. We need to make sure that the USB serial driver we find matches the USB driver whose probe we are currently executing. Otherwise we will end up with USB serial devices bound to the correct serial driver but wrong USB driver. An example of such cross-probing, where the usbserial_generic USB driver has found the sierra serial driver: May 29 18:26:15 nemi kernel: [ 4442.559246] usbserial_generic 4-4:1.0: Sierra USB modem converter detected May 29 18:26:20 nemi kernel: [ 4447.556747] usbserial_generic 4-4:1.2: Sierra USB modem converter detected May 29 18:26:25 nemi kernel: [ 4452.557288] usbserial_generic 4-4:1.3: Sierra USB modem converter detected sysfs view of the same problem: bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/sierra -rw-r--r-- 1 root root 4096 May 29 18:23 new_id lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/ttyUSB0 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB1 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2/ttyUSB1 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3/ttyUSB2 --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/usbserial_generic/ total 0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.3 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/generic/ total 0 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial -rw-r--r-- 1 root root 4096 May 29 18:33 new_id --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind So we end up with a mismatch between the USB driver and the USB serial driver. The reason for the above is simple: The USB driver probe will succeed if *any* registered serial driver matches, and will use that serial driver for all serial driver functions. This makes ref counting go wrong. We count the USB driver as used, but not the USB serial driver. This may result in Oops'es as demonstrated by Johan Hovold <jhovold@gmail.com>: [11811.646396] drivers/usb/serial/usb-serial.c: get_free_serial 1 [11811.646443] drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0 [11811.646460] drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0 [11811.646766] usb 6-1: pl2303 converter now attached to ttyUSB0 [11812.264197] USB Serial deregistering driver FTDI USB Serial Device [11812.264865] usbcore: deregistering interface driver ftdi_sio [11812.282180] USB Serial deregistering driver pl2303 [11812.283141] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [11812.283272] usbcore: deregistering interface driver pl2303 [11812.301056] USB Serial deregistering driver generic [11812.301186] usbcore: deregistering interface driver usbserial_generic [11812.301259] drivers/usb/serial/usb-serial.c: usb_serial_disconnect [11812.301823] BUG: unable to handle kernel paging request at f8e7438c [11812.301845] IP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.301871] *pde = 357ef067 *pte = 00000000 [11812.301957] Oops: 0000 [#1] PREEMPT SMP [11812.301983] Modules linked in: usbserial(-) [last unloaded: pl2303] [11812.302008] [11812.302019] Pid: 1323, comm: modprobe Tainted: G W 3.4.0-rc7+ #101 Dell Inc. Vostro 1520/0T816J [11812.302115] EIP: 0060:[<f8e38445>] EFLAGS: 00010246 CPU: 1 [11812.302130] EIP is at usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.302141] EAX: f508a180 EBX: f508a180 ECX: 00000000 EDX: f8e74300 [11812.302151] ESI: f5050800 EDI: 00000001 EBP: f5141e78 ESP: f5141e58 [11812.302160] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [11812.302170] CR0: 8005003b CR2: f8e7438c CR3: 34848000 CR4: 000007d0 [11812.302180] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [11812.302189] DR6: ffff0ff0 DR7: 00000400 [11812.302199] Process modprobe (pid: 1323, ti=f5140000 task=f61e2bc0 task.ti=f5140000) [11812.302209] Stack: [11812.302216] f8e3be0f f8e3b29c f8e3ae00 00000000 f513641c f5136400 f513641c f507a540 [11812.302325] f5141e98 c133d2c1 00000000 00000000 f509c400 f513641c f507a590 f5136450 [11812.302372] f5141ea8 c12f0344 f513641c f507a590 f5141ebc c12f0c67 00000000 f507a590 [11812.302419] Call Trace: [11812.302439] [<c133d2c1>] usb_unbind_interface+0x51/0x190 [11812.302456] [<c12f0344>] __device_release_driver+0x64/0xb0 [11812.302469] [<c12f0c67>] driver_detach+0x97/0xa0 [11812.302483] [<c12f001c>] bus_remove_driver+0x6c/0xe0 [11812.302500] [<c145938d>] ? __mutex_unlock_slowpath+0xcd/0x140 [11812.302514] [<c12f0ff9>] driver_unregister+0x49/0x80 [11812.302528] [<c1457df6>] ? printk+0x1d/0x1f [11812.302540] [<c133c50d>] usb_deregister+0x5d/0xb0 [11812.302557] [<f8e37c55>] ? usb_serial_deregister+0x45/0x50 [usbserial] [11812.302575] [<f8e37c8d>] usb_serial_deregister_drivers+0x2d/0x40 [usbserial] [11812.302593] [<f8e3a6e2>] usb_serial_generic_deregister+0x12/0x20 [usbserial] [11812.302611] [<f8e3acf0>] usb_serial_exit+0x8/0x32 [usbserial] [11812.302716] [<c1080b48>] sys_delete_module+0x158/0x260 [11812.302730] [<c110594e>] ? mntput+0x1e/0x30 [11812.302746] [<c145c3c3>] ? sysenter_exit+0xf/0x18 [11812.302746] [<c107777c>] ? trace_hardirqs_on_caller+0xec/0x170 [11812.302746] [<c145c390>] sysenter_do_call+0x12/0x36 [11812.302746] Code: 24 02 00 00 e8 dd f3 20 c8 f6 86 74 02 00 00 02 74 b4 8d 86 4c 02 00 00 47 e8 78 55 4b c8 0f b6 43 0e 39 f8 7f a9 8b 53 04 89 d8 <ff> 92 8c 00 00 00 89 d8 e8 0e ff ff ff 8b 45 f0 c7 44 24 04 2f [11812.302746] EIP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] SS:ESP 0068:f5141e58 [11812.302746] CR2: 00000000f8e7438c Fix by only evaluating serial drivers pointing back to the USB driver we are currently probing. This still allows two or more drivers to match the same device, running their serial driver probes to sort out which one to use. Signed-off-by: Bjørn Mork <bjorn@mork.no> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: serial: sierra: Add support for Sierra Wireless AirCard 320U modemTom Cassidy
commit 19a3dd1575e954e8c004413bee3e12d3962f2525 upstream. Add support for Sierra Wireless AirCard 320U modem Signed-off-by: Tomas Cassidy <tomas.cassidy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22usb: cdc-acm: fix devices not unthrottled on openOtto Meta
commit 6c4707f3f8c44ec18282e1c014c80e1c257042f9 upstream. Currently CDC-ACM devices stay throttled when their TTY is closed while throttled, stalling further communication attempts after the next open. Unthrottling during open/activate got lost starting with kernel 3.0.0 and this patch reintroduces it. Signed-off-by: Otto Meta <otto.patches@sister-shadow.de> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2Alan Stern
commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b upstream. This patch (as1558) fixes a problem affecting several ASUS computers: The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep. After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep. The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs. A similar patch has already been applied as commit 151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during suspend on ASUS computers). The patch supersedes that one and reverts it. There are two differences: The old patch added the flag at the USB level; this patch adds it at the PCI level. The old patch applied to all chipsets with the same vendor, subsystem vendor, and product IDs; this patch makes an exception for a known-good system (based on DMI information). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dâniel Fraga <fragabr@gmail.com> Tested-by: Andrey Rahmatullin <wrar@wrar.name> Tested-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: ftdi-sio: Add support for RT Systems USB-RTS01 serial adapterEvan McNabb
commit e00a54d772210d450e5c1a801534c3c8a448549f upstream. Add support for RT Systems USB-RTS01 USB to Serial adapter: http://www.rtsystemsinc.com/Photos/USBRTS01.html Tested by controlling Icom IC-718 amateur radio transceiver via hamlib. Signed-off-by: Evan McNabb <evan@mcnabbs.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: serial: cp210x: add Optris MS Pro usb idMikko Tuumanen
commit 5bbfa6f427c1d7244a5ee154ab8fa37265a5e049 upstream. Signed-off-by: Mikko Tuumanen <mikko.tuumanen@qemsoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: mct_u232: Fix incorrect TIOCMSET returnAlan Cox
commit 1aa3c63cf0a79153ee13c8f82e4eb6c40b66a161 upstream. The low level helper returns 1 on success. The ioctl should however return 0. As this is the only user of the helper return, make the helper return 0 or an error code. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43009 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: qcserial: Add Sierra Wireless device IDsBjørn Mork
commit c41444ccfa33a1c20efa319e554cb531576e64a2 upstream. Some additional IDs found in the BSD/GPL licensed out-of-tree GobiSerial driver from Sierra Wireless. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: mos7840: Fix compilation of usb serial driverTony Zelenoff
commit b9c87663eead64c767e72a373ae6f8a94bead459 upstream. The __devinitconst section can't be referenced from usb_serial_device structure. Thus removed it as it done in other mos* device drivers. Error itself: WARNING: drivers/usb/serial/mos7840.o(.data+0x8): Section mismatch in reference from the variable moschip7840_4port_device to the variable .devinit.rodata:id_table The variable moschip7840_4port_device references the variable __devinitconst id_table [v2] no attach now Signed-off-by: Tony Zelenoff <antonz@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22xHCI: Increase the timeout for controller save/restore state operationAndiry Xu
commit 622eb783fe6ff4c1baa47db16c3a5db97f9e6e50 upstream. When system software decides to power down the xHC with the intent of resuming operation at a later time, it will ask xHC to save the internal state and restore it when resume to correctly recover from a power event. Two bits are used to enable this operation: Save State and Restore State. xHCI spec 4.23.2 says software should "Set the Controller Save/Restore State flag in the USBCMD register and wait for the Save/Restore State Status flag in the USBSTS register to transition to '0'". However, it does not define how long software should wait for the SSS/RSS bit to transition to 0. Currently the timeout is set to 1ms. There is bug report (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1002697) indicates that the timeout is too short for ASMedia ASM1042 host controller to save/restore the state successfully. Increase the timeout to 10ms helps to resolve the issue. This patch should be backported to stable kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation" Signed-off-by: Andiry Xu <andiry.xu@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22hfsplus: fix overflow in sector calculations in hfsplus_submit_bioJanne Kalliomäki
commit a6dc8c04218eb752ff79cdc24a995cf51866caed upstream. The variable io_size was unsigned int, which caused the wrong sector number to be calculated after aligning it. This then caused mount to fail with big volumes, as backup volume header information was searched from a wrong sector. Signed-off-by: Janne Kalliomäki <janne@tuxera.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: option: fix port-data abuseJohan Hovold
commit 4273f9878b0a8271df055e3c8f2e7f08c6a4a2f4 upstream. Commit 8b4c6a3ab596961b78465 ("USB: option: Use generic USB wwan code") moved option port-data allocation to usb_wwan_startup but still cast the port data to the old struct... Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: option: fix memory leakJohan Hovold
commit b9c3aab315b51f81649a0d737c4c73783fbd8de0 upstream. Fix memory leak introduced by commit 383cedc3bb435de7a2 ("USB: serial: full autosuspend support for the option driver") which allocates usb-serial data but never frees it. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: option: add more YUGA device ids说不得
commit 0ef0be15fd2564767f114c249fc4af704d8e16f4 upstream. Signed-off-by: gavin zhu <gavin.zhu@qq.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: option: Updated Huawei K4605 has better idAndrew Bird
commit 42ca7da1c2363dbef4ba1b6917c4c02274b6a5e2 upstream. Later firmwares for this device now have proper subclass and protocol info so we can identify it nicely without needing to use the blacklist. I'm not removing the old 0xff matching as there may be devices in the field that still need that. Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22USB: option: Add Vodafone/Huawei K5005 supportBjørn Mork
commit 4cbbb039a9719fb3bba73d255c6a95bc6dc6428b upstream. Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22NFSv4.1: Fix a request leak on the back channelTrond Myklebust
commit b3b02ae5865c2dcd506322e0fc6def59a042e72f upstream. If the call to svc_process_common() fails, then the request needs to be freed before we can exit bc_svc_process. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22xen/setup: filter APERFMPERF cpuid feature outAndre Przywara
commit 5e626254206a709c6e937f3dda69bf26c7344f6f upstream. Xen PV kernels allow access to the APERF/MPERF registers to read the effective frequency. Access to the MSRs is however redirected to the currently scheduled physical CPU, making consecutive read and compares unreliable. In addition each rdmsr traps into the hypervisor. So to avoid bogus readouts and expensive traps, disable the kernel internal feature flag for APERF/MPERF if running under Xen. This will a) remove the aperfmperf flag from /proc/cpuinfo b) not mislead the power scheduler (arch/x86/kernel/cpu/sched.c) to use the feature to improve scheduling (by default disabled) c) not mislead the cpufreq driver to use the MSRs This does not cover userland programs which access the MSRs via the device file interface, but this will be addressed separately. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22ARM i.MX imx21ads: Fix overlapping static i/o mappingsJaccon Bastiaansen
commit 350ab15bb2ffe7103bc6bf6c634f3c5b286eaf2a upstream. The statically defined I/O memory regions for the i.MX21 on chip peripherals and the on board I/O peripherals of the i.MX21ADS board overlap. This results in a kernel crash during startup. This is fixed by reducing the memory range for the on board I/O peripherals to the actually required range. Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17Linux 3.0.35v3.0.35Greg Kroah-Hartman
2012-06-17hugetlb: fix resv_map leak in error pathDave Hansen
commit c50ac050811d6485616a193eb0f37bfbd191cc89 and 4523e1458566a0e8ecfaff90f380dd23acc44d27 upstream. When called for anonymous (non-shared) mappings, hugetlb_reserve_pages() does a resv_map_alloc(). It depends on code in hugetlbfs's vm_ops->close() to release that allocation. However, in the mmap() failure path, we do a plain unmap_region() without the remove_vma() which actually calls vm_ops->close(). This is a decent fix. This leak could get reintroduced if new code (say, after hugetlb_reserve_pages() in hugetlbfs_file_mmap()) decides to return an error. But, I think it would have to unroll the reservation anyway. Christoph's test case: http://marc.info/?l=linux-mm&m=133728900729735 This patch applies to 3.4 and later. A version for earlier kernels is at https://lkml.org/lkml/2012/5/22/418. Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reported-by: Christoph Lameter <cl@linux.com> Tested-by: Christoph Lameter <cl@linux.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17mm: fix faulty initialization in vmalloc_init()KyongHo
commit dbda591d920b4c7692725b13e3f68ecb251e9080 upstream. The transfer of ->flags causes some of the static mapping virtual addresses to be prematurely freed (before the mapping is removed) because VM_LAZY_FREE gets "set" if tmp->flags has VM_IOREMAP set. This might cause subsequent vmalloc/ioremap calls to fail because it might allocate one of the freed virtual address ranges that aren't unmapped. va->flags has different types of flags from tmp->flags. If a region with VM_IOREMAP set is registered with vm_area_add_early(), it will be removed by __purge_vmap_area_lazy(). Fix vmalloc_init() to correctly initialize vmap_area for the given vm_struct. Also initialise va->vm. If it is not set, find_vm_area() for the early vm regions will always fail. Signed-off-by: KyongHo Cho <pullip.cho@samsung.com> Cc: "Olav Haugan" <ohaugan@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17mm/vmalloc.c: change void* into explict vm_struct*Minchan Kim
commit db1aecafef58b5dda39c4228debe2c845e4a27ab upstream. vmap_area->private is void* but we don't use the field for various purpose but use only for vm_struct. So change it to a vm_struct* with naming to improve for readability and type checking. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17e1000: save skb counts in TX to avoid cache missesDean Nelson
commit 31c15a2f24ebdab14333d9bf5df49757842ae2ec upstream. Virtual Machines with emulated e1000 network adapter running on Parallels' server were seeing kernel panics due to the e1000 driver dereferencing an unexpected NULL pointer retrieved from buffer_info->skb. The problem has been addressed for the e1000e driver, but not for the e1000. Since the two drivers share similar code in the affected area, a port of the following e1000e driver commit solves the issue for the e1000 driver: commit 9ed318d546a29d7a591dbe648fd1a2efe3be1180 Author: Tom Herbert <therbert@google.com> Date: Wed May 5 14:02:27 2010 +0000 e1000e: save skb counts in TX to avoid cache misses In e1000_tx_map, precompute number of segements and bytecounts which are derived from fields in skb; these are stored in buffer_info. When cleaning tx in e1000_clean_tx_irq use the values in the associated buffer_info for statistics counting, this eliminates cache misses on skb fields. Signed-off-by: Dean Nelson <dnelson@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Roman Kagan <rkagan@parallels.com>
2012-06-17fuse: fix stat call on 32 bit platformsPavel Shilovsky
commit 45c72cd73c788dd18c8113d4a404d6b4a01decf1 upstream. Now we store attr->ino at inode->i_ino, return attr->ino at the first time and then return inode->i_ino if the attribute timeout isn't expired. That's wrong on 32 bit platforms because attr->ino is 64 bit and inode->i_ino is 32 bit in this case. Fix this by saving 64 bit ino in fuse_inode structure and returning it every time we call getattr. Also squash attr->ino into inode->i_ino explicitly. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17x86, MCE, AMD: Make APIC LVT thresholding interrupt optionalBorislav Petkov
commit f227d4306cf30e1d5b6f231e8ef9006c34f3d186 upstream. Currently, the APIC LVT interrupt for error thresholding is implicitly enabled. However, there are models in the F15h range which do not enable it. Make the code machinery which sets up the APIC interrupt support an optional setting and add an ->interrupt_capable member to the bank representation mirroring that capability and enable the interrupt offset programming only if it is true. Simplify code and fixup comment style while at it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2012-06-17iwlwifi: don't mess up the SCD when removing a keyEmmanuel Grumbach
commit d6ee27eb13beab94056e0de52d81220058ca2297 upstream. When we remove a key, we put a key index which was supposed to tell the fw that we are actually removing the key. But instead the fw took that index as a valid index and messed up the SRAM of the device. This memory corruption on the device mangled the data of the SCD. The impact on the user is that SCD queue 2 got stuck after having removed keys. The message is the log that was printed is: Queue 2 stuck for 10000ms This doesn't seem to fix the higher queues that get stuck from time to time. Reviewed-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17sched: Fix the relax_domain_level boot parameterDimitri Sivanich
commit a841f8cef4bb124f0f5563314d0beaf2e1249d72 upstream. It does not get processed because sched_domain_level_max is 0 at the time that setup_relax_domain_level() is run. Simply accept the value as it is, as we don't know the value of sched_domain_level_max until sched domain construction is completed. Fix sched_relax_domain_level in cpuset. The build_sched_domain() routine calls the set_domain_attribute() routine prior to setting the sd->level, however, the set_domain_attribute() routine relies on the sd->level to decide whether idle load balancing will be off/on. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120605184436.GA15668@sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17acpi_video: fix leaking PCI referencesAlan Cox
commit cfb46f433a4da97c31780e08a259fac2cb6bd61f upstream. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17hwmon: (fam15h_power) Increase output resolutionAndre Przywara
commit 941a956b0e387b21f385f486c34ef67576775cfc upstream. On high CPU load the accumulating values in the running_avg_cap register are very low (below 10), so averaging them too early leads to unnecessary poor output resolution. Since we pretend to output micro-Watt we better keep all the bits we have as long as possible. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17can: c_can: fix race condition in c_can_open()AnilKumar Ch
commit f461f27a4436dbe691908fe08b867ef888848cc3 upstream. Fix the issue of C_CAN interrupts getting disabled forever when canconfig utility is used multiple times. According to NAPI usage we disable all the hardware interrupts in ISR and re-enable them in poll(). Current implementation calls napi_enable() after hardware interrupts are enabled. If we get any interrupts between these two steps then we do not process those interrupts because napi is not enabled. Mostly these interrupts come because of STATUS is not 0x7 or ERROR interrupts. If napi_enable() happens before HW interrupts enabled then c_can_poll() function will be called eventual re-enabling. This patch moves the napi_enable() call before interrupts enabled. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17can: c_can: fix an interrupt thrash issue with c_can driverAnilKumar Ch
commit 148c87c89e1a8863d3d965179f3ab1a06490569e upstream. This patch fixes an interrupt thrash issue with c_can driver. In c_can_isr() function interrupts are disabled and enabled only in c_can_poll() function. c_can_isr() & c_can_poll() both read the irqstatus flag. However, irqstatus is always read as 0 in c_can_poll() because all C_CAN interrupts are disabled in c_can_isr(). This causes all interrupts to be re-enabled in c_can_poll() which in turn causes another interrupt since the event is not really handled. This keeps happening causing a flood of interrupts. To fix this, read the irqstatus register in isr and use the same cached value in the poll function. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17can: c_can: fix "BUG! echo_skb is occupied!" during transmitAnilKumar Ch
commit 617caccebe451716df21c069b079d5936ed7b0f3 upstream. This patch fixes an issue with transmit routine, which causes "can_put_echo_skb: BUG! echo_skb is occupied!" message when using "cansequence -p" on D_CAN controller. In c_can driver, while transmitting packets tx_echo flag holds the no of can frames put for transmission into the hardware. As the comment above c_can_do_tx() indicates, if we find any packet which is not transmitted then we should stop looking for more. In the current implementation this is not taken care of causing the said message. Also, fix the condition used to find if the packet is transmitted or not. Current code skips the first tx message object and ends up checking one extra invalid object. While at it, fix the comment on top of c_can_do_tx() to use the terminology "packet" instead of "package" since it is more standard. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17net: sierra_net: device IDs for Aircard 320U++Bjørn Mork
commit dd03cff23d694cfb0fdae80cb618e7ced05ea696 upstream. Adding device IDs for Aircard 320U and two other devices found in the out-of-tree version of this driver. Cc: linux@sierrawireless.com Cc: Autif Khan <autif.mlist@gmail.com> Cc: Tom Cassidy <tomas.cassidy@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17cfg80211: fix interface combinations checkJohannes Berg
commit 463454b5dbd8dbab6e2fc6c557329e5b811b9c32 upstream. If a given interface combination doesn't contain a required interface type then we missed checking that and erroneously allowed it even though iface type wasn't there at all. Add a check that makes sure that all interface types are accounted for. Reported-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17mac80211: clean up remain-on-channel on interface stopJohannes Berg
commit 71ecfa1893034eeb1c93e02e22ee2ad26d080858 upstream. When any interface goes down, it could be the one that we were doing a remain-on-channel with. We therefore need to cancel the remain-on-channel and flush the related work structs so they don't run after the interface has been removed or even destroyed. It's also possible in this case that an off-channel SKB was never transmitted, so free it if this is the case. Note that this can also happen if the driver finishes the off-channel period without ever starting it. Reported-by: Nirav Shah <nirav.j2.shah@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17crypto: aesni-intel - fix unaligned cbc decrypt for x86-32Mathias Krause
commit 7c8d51848a88aafdb68f42b6b650c83485ea2f84 upstream. The 32 bit variant of cbc(aes) decrypt is using instructions requiring 128 bit aligned memory locations but fails to ensure this constraint in the code. Fix this by loading the data into intermediate registers with load unaligned instructions. This fixes reported general protection faults related to aesni. References: https://bugzilla.kernel.org/show_bug.cgi?id=43223 Reported-by: Daniel <garkein@mailueberfall.de> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17powerpc: Fix kernel panic during kernel module loadSteffen Rumler
commit 3c75296562f43e6fbc6cddd3de948a7b3e4e9bcf upstream. This fixes a problem which can causes kernel oopses while loading a kernel module. According to the PowerPC EABI specification, GPR r11 is assigned the dedicated function to point to the previous stack frame. In the powerpc-specific kernel module loader, do_plt_call() (in arch/powerpc/kernel/module_32.c), GPR r11 is also used to generate trampoline code. This combination crashes the kernel, in the case where the compiler chooses to use a helper function for saving GPRs on entry, and the module loader has placed the .init.text section far away from the .text section, meaning that it has to generate a trampoline for functions in the .init.text section to call the GPR save helper. Because the trampoline trashes r11, references to the stack frame using r11 can cause an oops. The fix just uses GPR r12 instead of GPR r11 for generating the trampoline code. According to the statements from Freescale, this is safe from an EABI perspective. I've tested the fix for kernel 2.6.33 on MPC8541. Signed-off-by: Steffen Rumler <steffen.rumler.ext@nsn.com> [paulus@samba.org: reworded the description] Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17btree: fix tree corruption in btree_get_prev()Roland Dreier
commit cbf8ae32f66a9ceb8907ad9e16663c2a29e48990 upstream. The memory the parameter __key points to is used as an iterator in btree_get_prev(), so if we save off a bkey() pointer in retry_key and then assign that to __key, we'll end up corrupting the btree internals when we do eg longcpy(__key, bkey(geo, node, i), geo->keylen); to return the key value. What we should do instead is use longcpy() to copy the key value that retry_key points to __key. This can cause a btree to get corrupted by seemingly read-only operations such as btree_for_each_safe. [akpm@linux-foundation.org: avoid the double longcpy()] Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-by: Joern Engel <joern@logfs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-17char/agp: add another Ironlake host bridgeEugeni Dodonov
commit 67384fe3fd450536342330f684ea1f7dcaef8130 upstream. This seems to come on Gigabyte H55M-S2V and was discovered through the https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381 Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-10Linux 3.0.34v3.0.34Greg Kroah-Hartman
2012-06-10ext4: don't set i_flags in EXT4_IOC_SETFLAGSTao Ma
commit b22b1f178f6799278d3178d894f37facb2085765 upstream. Commit 7990696 uses the ext4_{set,clear}_inode_flags() functions to change the i_flags automatically but fails to remove the error setting of i_flags. So we still have the problem of trashing state flags. Fix this by removing the assignment. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-10wl1251: fix oops on early interruptGrazvydas Ignotas
commit f380f2c4a12e913356bd49f8790ec1063c4fe9f8 upstream. This driver disables interrupt just after requesting it and enables it later, after interface is up. However currently there is a time window between request_irq() and disable_irq() where if interrupt arrives, the driver oopses because it's not yet ready to process it. This can be reproduced by inserting the module, associating and removing the module multiple times. Eliminate this race by setting IRQF_NOAUTOEN flag before request_irq(). Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-10ACPI battery: only refresh the sysfs files when pertinent information changesAndy Whitcroft
commit c5971456964290da7e98222892797b71ef793e62 upstream. We only need to regenerate the sysfs files when the capacity units change, avoid the update otherwise. The origin of this issue is dates way back to 2.6.38: da8aeb92d4853f37e281f11fddf61f9c7d84c3cd (ACPI / Battery: Update information on info notification and resume) Signed-off-by: Andy Whitcroft <apw@canonical.com> Tested-by: Ralf Jung <post@ralfj.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-10drm/radeon/kms: add new BTC PCI idsAlex Deucher
commit a2bef8ce826dd1e787fd8ad9b6e0566ba59dab43 upstream. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-10ext4: remove mb_groups before tearing down the buddy_cacheSalman Qazi
commit 95599968d19db175829fb580baa6b68939b320fb upstream. We can't have references held on pages in the s_buddy_cache while we are trying to truncate its pages and put the inode. All the pages must be gone before we reach clear_inode. This can only be gauranteed if we can prevent new users from grabbing references to s_buddy_cache's pages. The original bug can be reproduced and the bug fix can be verified by: while true; do mount -t ext4 /dev/ram0 /export/hda3/ram0; \ umount /export/hda3/ram0; done & while true; do cat /proc/fs/ext4/ram0/mb_groups; done Signed-off-by: Salman Qazi <sqazi@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-10ext4: add ext4_mb_unload_buddy in the error pathSalman Qazi
commit 02b7831019ea4e7994968c84b5826fa8b248ffc8 upstream. ext4_free_blocks fails to pair an ext4_mb_load_buddy with a matching ext4_mb_unload_buddy when it fails a memory allocation. Signed-off-by: Salman Qazi <sqazi@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-10ext4: don't trash state flags in EXT4_IOC_SETFLAGSTheodore Ts'o
commit 79906964a187c405db72a3abc60eb9b50d804fbc upstream. In commit 353eb83c we removed i_state_flags with 64-bit longs, But when handling the EXT4_IOC_SETFLAGS ioctl, we replace i_flags directly, which trashes the state flags which are stored in the high 32-bits of i_flags on 64-bit platforms. So use the the ext4_{set,clear}_inode_flags() functions which use atomic bit manipulation functions instead. Reported-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-29 02:25:43 +0000