summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-27pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe()pinctrl-for-v3.11-1Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-25pinctrl: remove bindings for pinconf options needing more thoughtHeiko Stübner
Some options currently take arguments in unspecified driver-specific units. As pointed out by Stephen Warren, driver specific values should not be part of generic devicetree bindings describing the hardware. Therefore remove the critical bindings again, before they become part of an official release. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-25pinctrl: remove slew-rate parameter from tz1090Heiko Stübner
As the binding for slew-rate is under discussion and seems to need more tought it will get removed for now, so it doesn't get an offical release. Therefore remove it again from the only current user, tz1090. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-25pinctrl: set unit for debounce time pinconfig to usecHeiko Stübner
Currently the debounce time pinconfig option uses an unspecified "time units" unit. As pinconfig options should use SI units and a real unit is also necessary for generic dt bindings, change it to usec. Currently no driver is using the generic pinconfig option for this, so the unit change is safe to do. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-25pinctrl: more clarifications for generic pull configsHeiko Stübner
PULL_PIN_DEFAULT is meant for hardware completely hiding any pull settings from the driver, so that it's really only possible to turn the pull on or off, but it not being possible to determine any pull settings from software. Also the binding-documentation for the pull arguments did not match the changes to the expected values. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-25pinctrl: rip out the direct pinconf APILinus Walleij
From the inception ot the pin config API there has been the possibility to get a handle at a pin directly and configure its electrical characteristics. For this reason we had: int pin_config_get(const char *dev_name, const char *name, unsigned long *config); int pin_config_set(const char *dev_name, const char *name, unsigned long config); int pin_config_group_get(const char *dev_name, const char *pin_group, unsigned long *config); int pin_config_group_set(const char *dev_name, const char *pin_group, unsigned long config); After the introduction of the pin control states that will control pins associated with devices, and its subsequent introduction to the device core, as well as the introduction of pin control hogs that can set up states on boot and optionally also at sleep, this direct pin control API is a thing of the past. As could be expected, it has zero in-kernel users. Let's delete this API and make our world simpler. Reported-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driverJames Hogan
Add a pin control driver for the TZ1090's low power pins via the powerdown controller SOC_GPIO_CONTROL registers. These pins have individually controlled pull-up, and group controlled schmitt, slew-rate, drive-strength, and power-on-start (pos). The pdc_gpio0 and pdc_gpio1 pins can also be muxed onto the ir_mod_stable_out and ir_mod_power_out functions respectively. If no function is set they remain in GPIO mode. These muxes can be overridden by requesting them as GPIOs. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24pinctrl-tz1090: add TZ1090 pinctrl driverJames Hogan
Add a pin control driver for the main pins on the TZ1090 SoC. This doesn't include the low-power pins as they're controlled separately via the Powerdown Controller (PDC) registers. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24pinctrl: samsung: Staticize drvdata_listSachin Kamat
'drvdata_list' is used only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24pinctrl: rockchip: Add missing irq_gc_unlock() call before return errorAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24pinctrl: abx500: rework error pathPatrice Chotard
At several places, return value was not tested and error output was missing. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24pinctrl: abx500: suppress hardcoded valuePatrice Chotard
Replace hardcoded value by corresponding #define's. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24pinctrl: abx500: factorize codePatrice Chotard
Factorize code by adding abx500_pullud_supported() which improve code readability. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24pinctrl: abx500: fix abx500_gpio_get()Patrice Chotard
- allow to get output GPIO value - as there is no GPIO0 on ABX500, use correct offset with abx500_gpio_get_bit() Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24pinctrl: abx500: fix abx500_pin_config_set()Patrice Chotard
- Update abx500_pin_config_set() in order to take in account PIN_CONFIG_BIAS_DISABLE state to disable pull up or pull down. - Rework error path. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24pinctrl: abx500: Add device tree supportPatrice Chotard
We use the same way to define pin muxing and pin configuration than for nomadik. So pickup code from pinctrl_nomadik.c to be able to implement pin multiplexing and pin configuration using the device tree. Pin configuration uses generic parsing code. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24sh-pfc: Guard DT parsing with #ifdef CONFIG_OFLaurent Pinchart
Fix a compilation error caused by pinconf_generic_parse_dt_config() not being defined on !CONFIG_OF platforms by guarding the whole DT node parsing code with #ifdef CONFIG_OF. Defining a pinconf_generic_parse_dt_config() on !CONFIG_OF would have been possible as well, but would have resulted in a larger code size on !CONFIG_OF platforms (such as arch/sh). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-18pinctrl: add Intel BayTrail GPIO/pinctrl supportMathias Nyman
Add support for gpio on Intel BayTrail platforms. BayTrail supports 3 banks of gpios called SCORE, NCORE ans SUS with 102, 28 and 44 gpio pins. Supports gpio interrupts and ACPI gpio events Pins may be muxed to alternate function instead of gpio by firmware. This driver does not touch the pin muxing and expect firmare to set pin muxing and pullup/down properties properly. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-18pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldocJames Hogan
The kerneldoc comment for struct pinconf_ops was missing pin_config_dbg_parse_modify, and instead described pin_config_group_dbg_set (which is presumably an old name for the same function). Rename it in the kerneldoc comment so they match. Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-18pinctrl: Staticize local symbolsSachin Kamat
Symbols referenced only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-18pinctrl: spear/plgpio: Staticize spear310_o2pSachin Kamat
'spear310_o2p' is referenced only in this file. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-18pinctrl: nomadik: Staticize local symbolsSachin Kamat
Some symbols referenced only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-18pinctrl: bcm2835: Staticize bcm2835_gpio_pinsSachin Kamat
'bcm2835_gpio_pins' is used only in this file. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-18sh-pfc: Add pinconf support to DT bindingsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-18sh-pfc: Add DT supportLaurent Pinchart
Support device instantiation through the device tree. The compatible property is used to select the SoC pinmux information. Set the gpio_chip device field to the PFC device to enable automatic GPIO OF support. Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-18sh-pfc: Remove support for platform dataLaurent Pinchart
Platform data isn't used, support can thus be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-18pinctrl: core: fix missing unlock on error in pinctrl_find_gpio_range_from_pin()Wei Yongjun
Add the missing unlock before return from function pinctrl_find_gpio_range_from_pin() in the error handling case. Introduced by commit 2ff3477efd7086544b9e298fc63afab0645921b4. (pinctrl: add pin list based GPIO ranges) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17pinctrl: exynos: ack level-triggered interrupts before unmaskingDoug Anderson
A level-triggered interrupt should be acked after the interrupt line becomes inactive and before it is unmasked, or else another interrupt will be immediately triggered. Acking before or after calling the handler is not enough. Signed-off-by: Luigi Semenzato <semenzato@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17MAINTAINERS: Add Samsung pinctrl entriesDoug Anderson
It's convenient if get_maintainer suggests sending samsung/exynos pinctrl changes to linux-samsung-soc and to Tomasz and Thomas. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17pinctrl: export pinctrl_pm_select_*_stateArnd Bergmann
The three functions pinctrl_pm_select_default_state, pinctrl_pm_select_sleep_state, and pinctrl_pm_select_idle_state are used in drivers that can be loadable modules, and should be exported. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17pinctrl: rockchip: correctly handle arguments of pinconf optionsHeiko Stübner
Change the rockchip pinctrl driver to handle the arguments to the pull pinconfig options correctly. So only accept non-0 values for the pull options as the rockchip pin-controller can only turn pulls on and off (this via BIAS_DISABLE). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17pinctrl: single: adopt pinctrl sleep mode managementHebbar Gururaja
Make pinctrl-single able to handle suspend/resume events and change hogged pins states accordingly. Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17spi: pl022: remove unused ret and pins_state variablesFabio Baltieri
Removes the warnings: drivers/spi/spi-pl022.c: In function 'pl022_suspend_resources': drivers/spi/spi-pl022.c:2322:24: warning: unused variable 'pins_state' [-Wunused-variable] drivers/spi/spi-pl022.c:2321:6: warning: unused variable 'ret' [-Wunused-variable] drivers/spi/spi-pl022.c: In function 'pl022_resume_resources': drivers/spi/spi-pl022.c:2334:6: warning: unused variable 'ret' [-Wunused-variable] introduced in: f1c9cf0 spi: pl022: use pinctrl PM helpers Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17pinctrl: sunxi: Add Allwinner A10s pinsMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17pinctrl: sunxi: Move the pins definitions to a separate headerMaxime Ripard
It will allow us to have a cleaner separation between the data needed by the driver to work, and the core logic of the driver in itself, and will allow having too much noise in the core driver in the future. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17pinctrl: establish pull-up/pull-down terminologyLinus Walleij
It is counter-intuitive to have "0" mean disable in a boolean manner for electronic properties of pins such as pull-up and pull-down. Therefore, define that a pull-up/pull-down argument of 0 to such a generic option means that the pin is short-circuited to VDD or GROUND. Pull disablement shall be done using PIN_CONFIG_BIAS_DISABLE. Cc: James Hogan <james.hogan@imgtec.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by Heiko Stuebner <heiko@sntech.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17pinctrl: dynamically alloc temp array when parsing dt pinconf optionsHeiko Stübner
Allocating the temorary array in pinconf_generic_parse_dt_config on stack might cause problems later on, when the number of options grows over time. Therefore also allocate this array dynamically to be on the safe side. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17pinctrl: handle zero found dt pinconfig properties betterHeiko Stübner
This adds a shortcut when no valid pinconf properties are found in the parsed dt node, to set the values immediately and return. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17pinctrl: clarify some dt pinconfig optionsHeiko Stübner
The bias-pull-* options use values > 0 to indicate that the pull should be activated and optionally also indicate the strength of the pull. Therefore use an default value of 1 for these options. Split the low-power-mode option into low-power-enable and -disable. Update the documentation to describe the param arguments better. Reported-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17Fix comment on pinctrl_gpio_range.pin_baseChristian Ruppert
The comment introduced with the recently added pinctrl_gpio_range.pins element was wrong. This corrects it. Thanks to Patrice Chotard for pointing this out. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17pinctrl: update GPIO range docLinus Walleij
This updates the GPIO range documentation with the API changes for sparse/random/arbitrary pin-to-GPIO mappings. Reviewed-by: Christian Ruppert <christian.ruppert@abilis.com> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17pinctrl: move the pm state stubsLinus Walleij
The stubs for the !PINCTRL case were placed in the wrong part of the file, causing breakage in linux-next when compiling SH without pinctrl. Fix it up by moving the stubs to the right place. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17pinctrl: add pin list based GPIO rangesChristian Ruppert
Traditionally, GPIO ranges are based on consecutive ranges of both GPIO and pin numbers. This patch allows for GPIO ranges with arbitrary lists of pin numbers. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16pinctrl: exynos: reorder xyz_irq_unmask() so future patch can ackDoug Anderson
This patch does nothing but reorder the functions to improve the readability of a future patch. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16pinctrl: exynos: Add spinlocks to irq_mask and irq_unmaskDoug Anderson
The patch: 1984695 pinctrl: samsung: Protect bank registers with a spinlock ...added spinlocks to protect many accesses. However, the irq_mask and irq_unmask functions still do an unprotected read/modify/write. Add the spinlock there. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16pinctrl: abx500: fix build warningPatrice Chotard
pinctrl-abx500.c: In function 'abx500_gpio_dbg_show_one': pinctrl-abx500.c:534:14: warning: 'pud' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16pinctrl: add pinctrl driver for Rockchip SoCsHeiko Stübner
This driver adds support the Cortex-A9 based SoCs from Rockchip, so at least the RK2928, RK3066 (a and b) and RK3188. Earlier Rockchip SoCs seem to use similar mechanics for gpio handling so should be supportable with relative small changes. Pull handling on the rk3188 is currently a stub, due to it being a bit different to the earlier SoCs. Pinmuxing as well as gpio (and interrupt-) handling tested on a rk3066a based machine. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16pinctrl: add function to parse generic pinconfig properties from a dt nodeHeiko Stübner
pinconf_generic_parse_dt_config() takes a node as input and generates an array of generic pinconfig values from the properties of this node. As I couldn't find a mechanism to count the number of properties of a node the function uses internally an array to accept one of parameter and copies the real present options to a smaller variable at its end. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16drivers: net: davinci_mdio: use pinctrl PM helpersMugunthan V N
This utilize the new pinctrl core PM helpers to transition the driver to "default" and "sleep" states. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16drivers: net: cpsw: use pinctrl PM helpersMugunthan V N
This utilize the new pinctrl core PM helpers to transition the driver to "default" and "sleep" states. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-25 04:56:15 +0000