summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-10apalis-tk1: default to lp1 sleepApalis-TK1_LXDE-Image_2.7b2-20170410Dominik Sliwa
Due to problems with LP0 sleep, make LP1 the default option. Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-04apalis-tk1: video: use new modedb based settingsBhuvanchandra DV
Use modedb to set mode on Apalis TK1 frame buffer/display controller. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-04tegra: video: use modedb to specify frame buffer resolutionBhuvanchandra DV
Allow to specify framebuffer videomode using kernel command line parameters. NVIDIAs binary X driver later on picks up those settings and start X with current mode settings, if no EDID data are available. Reused some of the implementation from Stefan's work for modedb support[1] on Tegra20/30 [1] http://git.toradex.com/cgit/linux-toradex.git/commit/?h=tegra-next&id=1d3625dd9903bcc59e2df56836565ebb682948c1 Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-04apalis-tk1: use soc uid insteadBhuvanchandra DV
Instead of providing revision, SKU and PID information via soc_id pass SoC's unique ID. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-04regmap: irq: dispose all virtual irq before removing domainLaxman Dewangan
It is require to dispose all virtual irq of hwirq on chip created on given irq domain before removing this irq domain. Hence dispose all mapped irqs before deleting the irq domains in regmap_del_irq_chip(); Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04regmap: irq: Remove domain on exitMark Brown
irqdomain now supports removal of domains on exit so we can properly clean up on deletion of a regmap irqchip. Signed-off-by: Mark Brown <broonie@linaro.org>
2017-04-04regmap-irq: set IRQF_ONESHOT flag to ensure IRQ requestValentin Rothberg
Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. The %irq_flags flag is used to request the threaded IRQ and is also a parameter of the caller. Hence, we cannot be sure that IRQF_ONESHOT is set. This change avoids the potentially missing flag by setting IRQF_ONESHOT when requesting the threaded IRQ. Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci Signed-off-by: Valentin Rothberg <Valentin.Rothberg@lip6.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-04media: ov5640: set continuous clock for all modesWojciech Bieganski
Signed-off-by: Wojciech Bieganski <wbieganski@antmicro.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-04media: tegra_camera: add continuous clk supportWojciech Bieganski
Signed-off-by: Wojciech Bieganski <wbieganski@antmicro.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-04media: three csi2 inputs: tc378743 (csia/b), adv7280m (csie)Wojciech Bieganski
Signed-off-by: Wojciech Bieganski <wbieganski@antmicro.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-04media: fix pal supportWojciech Bieganski
Signed-off-by: Wojciech Bieganski <wbieganski@antmicro.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-04media: fix simultaneous captureWojciech Bieganski
Signed-off-by: Wojciech Bieganski <wbieganski@antmicro.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-04Reapply "media: tegra_camera: introduce 2 kthreads for capture"Mariusz Glebocki
This reverts commit b2f6b2abc791802631ff1c85488cdf3c1f0a97e2. Signed-off-by: Mariusz Glebocki <mglebocki@antmicro.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-04apalis-tk1: add wake-on-lan gpioDominik Sliwa
Configure GPIO connected to i210 wake-up pin as a wake-up source in the device tree. Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-04apalis-tk1: fix lp1 sleepDominik Sliwa
Fix suspend and resume for LP1 sleep. Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-04igb: integrate igb driver 5.3.5.4Marcel Ziswiler
Integrate latest igb driver version 5.3.5.4 (igb-5.3.5.4.tar.gz from e1000.sf.net). While this fixes a build time warning using later gcc compilers it should not have any further impact. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2017-04-04apalis-tk1: fix cpu and gpu thermal throttlingMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2017-04-04apalis-tk1: fix sdio freezeDominik Sliwa
Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-04-04apalis-tk1: mfd touch screen fixes and improvementsDominik Sliwa
Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-01-11apalis_tk1: Support for K20 based MFDApalis_TK1_LinuxImageV2.7Beta1_20170112Dominik Sliwa
On Apalis TK1 boards K20 MCU is used for CAN, GPIO, ADC and touch screen. This patch includes support for core MFD device, GPIO, ADC and touch screen. Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2017-01-11apalis-tk1: support i2c rtcMarcel Ziswiler
Integrate support for the carrier board level I2C RTC. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21mmc: tegra: apalis-tk1: no longer do card detect polling on v1.1 hwApalis_TK1_LinuxImageV2.6.1Beta2_20161122Marcel Ziswiler
Now with the working card detect pin in place on the latest V1.1 HW polling is no longer required. Therefore make it an optional define for V1.0 samples. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: working sd card detect on v1.1 hwMarcel Ziswiler
Add sd card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: adjust pin muxing for v1.1 hwMarcel Ziswiler
Configure Apalis MMC1 D6 GPIO on SDMMC3_CLK_LB_IN as reserved function without any pull-up/down. Configure GPIO_PV2 as SD1_CD# according to latest V1.1 HW. Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output driver enabled aka not tristated and input driver enabled as well as it features some magic properties even though the external loopback is disabled and the internal loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being set to 0xfffd according to the TRM! This pin is now a not-connect on V1.1 HW in order to avoid any interference. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: temp alert pull-upMarcel Ziswiler
Pull-up GPIO_PI6 connected to TMP451's ALERT#/THERM2#. While at it improve some comments. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21sdhci: tegra: add 200 mhz tuning dataMarcel Ziswiler
As we limit the clock to 200 MHz also add tap hole coefficients to allow for successful UHC-I tuning on SDMMC1. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21pinctrl: tegra: fix some mistakes in Tegra124Stephen Warren
A couple of pairs of pin group names were swapped in the table. This caused the wrong register to be programmed. Luckily, this had little effect, if any, since the swapped pins were likely to be programmed identically. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> (cherry picked from commit 0ffdd4b61b1326b2b8a7c4fdf3c061d807be1a74)
2016-11-21apalis-tk1: fix pcie clock and reset not conforming to specificationMarcel Ziswiler
Fix PCIe clock and reset not conforming to specification by moving PCIe reset handling including the PLX PEX 8605 errata 5 workaround from the board platform data into the right places timing wise in the PCIe driver itself. Also add a kernel command line argument to allow using the Apalis GPIO7 as a regular GPIO rather than for above mentioned PLX PEX 8605 workaround: pex_perst=0 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com> (cherry picked from tegra-next commit a2f63805703b43d55d91ae17f10d0049bf0f625e)
2016-11-21apalis-tk1: configure IPv6 SIT driver as moduleStefan Agner
SIT tunnels (IPv6 over IPv4) are not often used hence configure the driver as a module. This also gets rid of the extra network interface sit0 by default. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-11-21Revert "media: tegra_camera: introduce 2 kthreads for capture"Marcel Ziswiler
This reverts commit ff5bccb61c1f8da1f63451fda88bd1f65dbee5b2. This makes Antmicro's OV5640 camera module work again as described on their blog here: http://antmicro.com/Blog/2015/09/jetson-tk1-cameras/ Further investigation pending. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: integrate adv7280-m, ap1302, ov5640 and tc358743 supportMarcel Ziswiler
Integrate SoC camera support for the following CSI-2 codecs/sensors: - Analog Devices ADV7280-M, analog camera decoder with deinterlacer, PAL/NTSC@60fps - ON Semiconductor (formerly Aptina) AP1302 ISP + AR1820 image sensor, 13Mpx, 1080p@30fps - OmniVision OV5640, 5Mpx sensor, 1080p@30fps - Toshiba TC358743 HDMI to CSI-2 bridge, 1080p@60fps Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21media: support for second single-lane decoder (ADV7280M)Wojciech Bieganski
Connected to CSI CIL-E. Cameras doesn't work simultaneously. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21media: tc358743: update hdmi to csi-2 driverTomasz Gorochowik
A major part of the driver has been rewritten in order to avoid writing binary blobs to the chip. This version also adds support for more video modes. Input video modes supported: - 1920x1080 @ 60 - 1280x1024 @ 75 - 1280x720 @ 60 - 1024x768 @ 75 - 800x600 @ 75 - 640x480 @ 75 Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21ADV7280M video decoder with deinterlacer supportWojciech Bieganski
known issues: - decoder outputs PAL (720x576), but the image looks fine only when streamed in 640x576 mode, - vertical synchronisation glitches, - setting queue-size in gstreamer greater than 1 results in blinking image, - every start of streaming requires reloading of the modules Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21TC358743 HDMI to CSI-2 bridge supportWojciech Bieganski
known issues: - HDMI input works only in 640x480 mode, 720p only in test pattern mode, any 4-lane mode doesn't work - set HDMI transmitter to VGA mode before starting the stream Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21OV5640 camera supportWojciech Bieganski
known issues: - works only in 1080p mode, - vertical synchronisation glitches, - setting queue-size in gstreamer greater than 1 results in blinking image - every start of streaming requires reloading of the modules Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21AP1302 from ON Semiconductor support addedMarcel Ziswiler
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21YUV sensors support added to tegra_camera driverWojciech Bieganski
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: re-add soc camera platform dataMarcel Ziswiler
Re-add SoC camera platform data from Ardbeg/Jetson TK1 board files. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: integrate optional edp supportMarcel Ziswiler
Integrate optional eDP support (e.g. uncomment define of APALIS_TK1_EDP as found in the platform data header file. Tested using a prototype Apalis TK1 mezzanine connecting to a Samsung LTN156FL02-L01 panel featuring a 4K aka UHD resolution of 3840 by 2160. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: clean-up board platform data header fileMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: clean-up board platform dataMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: clean-up defconfigMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: select dp pinmux function for dp_hpdMarcel Ziswiler
Select dp pinmux function for Apalis GPIO2 aka DP_HPD to allow it to be used as eDP hot-plug detect. From user space customer may still configure and use it as a regular GPIO if desired. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: remove gpio functionality from dp_hpd and gpio_pff2 pinsMarcel Ziswiler
Remove default GPIO functionality from Apalis GPIO1 aka GPIO_PFF2 and Apalis GPIO2 aka DP_HPD as if later trying to use resp. pins as special function (e.g. the former for eDP hot-plug detect and the later for SATA data activity) there is currently no sane way of removing the GPIO functionality again. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis-tk1: add comment concerning ssp1 on usb2p0 functionality being tbdMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-11-21apalis_tk1: Enable UART4Dominik Sliwa
Uncomment UART4 device tree node and enable support in machfile Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-11-21apalis-tk1: fix cl-dvfs and soctherm to unlock full performanceMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Dominik Sliwa <dominik.sliwa@toradex.com>
2016-09-29video: tegra: dc: fix gcc-6 compilationApalis_TK1_LinuxImageV2.6.1Beta1_20160929Marcel Ziswiler
drivers/video/tegra/dc/dc.c:116:3: error: 'can_filter' defined but not used [-Werror=unused-const-variable=] } can_filter[] = { ^~~~~~~~~~ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-09-29media: platform: tegra: fix gcc-6 compilationMarcel Ziswiler
drivers/media/platform/tegra/ad5816.c: In function 'ad5816_param_wr': drivers/media/platform/tegra/ad5816.c:682:6: error: this 'if' clause does not guard... [-Werror=misleading-indentation] if (info->s_mode != NVC_SYNC_STEREO) ^~ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-27 04:09:29 +0000