diff options
Diffstat (limited to 'drivers/usb/host/xhci-plat.c')
| -rw-r--r-- | drivers/usb/host/xhci-plat.c | 93 |
1 files changed, 78 insertions, 15 deletions
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 781283a5138e..c76b038c8bea 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -14,11 +14,14 @@ #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/module.h> +#include <linux/pci.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/usb/phy.h> #include <linux/slab.h> #include <linux/acpi.h> +#include <linux/busfreq-imx.h> +#include <linux/usb/of.h> #include "xhci.h" #include "xhci-plat.h" @@ -139,6 +142,7 @@ static int xhci_plat_probe(struct platform_device *pdev) { const struct of_device_id *match; const struct hc_driver *driver; + struct device *sysdev; struct xhci_hcd *xhci; struct resource *res; struct usb_hcd *hcd; @@ -155,24 +159,47 @@ static int xhci_plat_probe(struct platform_device *pdev) if (irq < 0) return irq; + /* + * sysdev must point to a device that is known to the system firmware + * or PCI hardware. We handle these three cases here: + * 1. xhci_plat comes from firmware + * 2. xhci_plat is child of a device from firmware (dwc3-plat) + * 3. xhci_plat is grandchild of a pci device (dwc3-pci) + */ + sysdev = &pdev->dev; + if (sysdev->parent && !sysdev->of_node && sysdev->parent->of_node) + sysdev = sysdev->parent; +#ifdef CONFIG_PCI + else if (sysdev->parent && sysdev->parent->parent && + sysdev->parent->parent->bus == &pci_bus_type) + sysdev = sysdev->parent->parent; +#endif + /* Try to set 64-bit DMA first */ - if (WARN_ON(!pdev->dev.dma_mask)) + if (WARN_ON(!sysdev->dma_mask)) /* Platform did not initialize dma_mask */ - ret = dma_coerce_mask_and_coherent(&pdev->dev, + ret = dma_coerce_mask_and_coherent(sysdev, DMA_BIT_MASK(64)); else - ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64)); /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */ if (ret) { - ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32)); if (ret) return ret; } - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); - if (!hcd) - return -ENOMEM; + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); + + hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, + dev_name(&pdev->dev), NULL); + if (!hcd) { + ret = -ENOMEM; + goto disable_runtime; + } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hcd->regs = devm_ioremap_resource(&pdev->dev, res); @@ -213,20 +240,23 @@ static int xhci_plat_probe(struct platform_device *pdev) xhci->clk = clk; xhci->main_hcd = hcd; - xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev, + xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, dev_name(&pdev->dev), hcd); if (!xhci->shared_hcd) { ret = -ENOMEM; goto disable_clk; } - if (device_property_read_bool(&pdev->dev, "usb3-lpm-capable")) + if (device_property_read_bool(sysdev, "usb3-lpm-capable")) xhci->quirks |= XHCI_LPM_SUPPORT; + if (device_property_read_bool(sysdev, "usb3-resume-missing-cas")) + xhci->quirks |= XHCI_MISSING_CAS; + if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped")) xhci->quirks |= XHCI_BROKEN_PORT_PED; - hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); + hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0); if (IS_ERR(hcd->usb_phy)) { ret = PTR_ERR(hcd->usb_phy); if (ret == -EPROBE_DEFER) @@ -238,6 +268,10 @@ static int xhci_plat_probe(struct platform_device *pdev) goto put_usb3_hcd; } + request_bus_freq(BUS_FREQ_HIGH); + hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); + xhci->shared_hcd->tpl_support = hcd->tpl_support; + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) goto disable_usb_phy; @@ -249,6 +283,9 @@ static int xhci_plat_probe(struct platform_device *pdev) if (ret) goto dealloc_usb2_hcd; + device_enable_async_suspend(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + return 0; @@ -257,6 +294,7 @@ dealloc_usb2_hcd: disable_usb_phy: usb_phy_shutdown(hcd->usb_phy); + release_bus_freq(BUS_FREQ_HIGH); put_usb3_hcd: usb_put_hcd(xhci->shared_hcd); @@ -268,6 +306,10 @@ disable_clk: put_hcd: usb_put_hcd(hcd); +disable_runtime: + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return ret; } @@ -289,6 +331,12 @@ static int xhci_plat_remove(struct platform_device *dev) clk_disable_unprepare(clk); usb_put_hcd(hcd); + if (!pm_runtime_suspended(&dev->dev)) + release_bus_freq(BUS_FREQ_HIGH); + + pm_runtime_set_suspended(&dev->dev); + pm_runtime_disable(&dev->dev); + return 0; } @@ -316,14 +364,29 @@ static int xhci_plat_resume(struct device *dev) return xhci_resume(xhci, 0); } +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM +static int xhci_plat_runtime_suspend(struct device *dev) +{ + release_bus_freq(BUS_FREQ_HIGH); + return 0; +} + +static int xhci_plat_runtime_resume(struct device *dev) +{ + request_bus_freq(BUS_FREQ_HIGH); + return 0; +} +#endif /* CONFIG_PM */ static const struct dev_pm_ops xhci_plat_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) + + SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, + xhci_plat_runtime_resume, + NULL) }; -#define DEV_PM_OPS (&xhci_plat_pm_ops) -#else -#define DEV_PM_OPS NULL -#endif /* CONFIG_PM */ static const struct acpi_device_id usb_xhci_acpi_match[] = { /* XHCI-compliant USB Controller */ @@ -338,7 +401,7 @@ static struct platform_driver usb_xhci_driver = { .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "xhci-hcd", - .pm = DEV_PM_OPS, + .pm = &xhci_plat_pm_ops, .of_match_table = of_match_ptr(usb_xhci_of_match), .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match), }, |