diff options
Diffstat (limited to 'drivers/tty/serial/8250')
-rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 15 | ||||
-rw-r--r-- | drivers/tty/serial/8250/serial_cs.c | 12 |
3 files changed, 23 insertions, 6 deletions
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 72f6cde146b5..db66e533319e 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -78,7 +78,7 @@ static void moan_device(const char *str, struct pci_dev *dev) static int setup_port(struct serial_private *priv, struct uart_8250_port *port, - int bar, int offset, int regshift) + u8 bar, unsigned int offset, int regshift) { struct pci_dev *dev = priv->dev; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index fef1b9335f60..d0d90752f9f3 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -124,7 +124,8 @@ static const struct serial8250_config uart_config[] = { .name = "16C950/954", .fifo_size = 128, .tx_loadsz = 128, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01, + .rxtrig_bytes = {16, 32, 112, 120}, /* UART_CAP_EFR breaks billionon CF bluetooth card. */ .flags = UART_CAP_FIFO | UART_CAP_SLEEP, }, @@ -274,7 +275,11 @@ configured less than Maximum supported fifo bytes */ /* Uart divisor latch read */ static int default_serial_dl_read(struct uart_8250_port *up) { - return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8; + /* Assign these in pieces to truncate any bits above 7. */ + unsigned char dll = serial_in(up, UART_DLL); + unsigned char dlm = serial_in(up, UART_DLM); + + return dll | dlm << 8; } /* Uart divisor latch write */ @@ -1160,9 +1165,11 @@ static void autoconfig(struct uart_8250_port *up) serial_out(up, UART_LCR, 0); serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); - scratch = serial_in(up, UART_IIR) >> 6; - switch (scratch) { + /* Assign this as it is to truncate any bits above 7. */ + scratch = serial_in(up, UART_IIR); + + switch (scratch >> 6) { case 0: autoconfig_8250(up); break; diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index 1a14948c86d6..92c64ed12295 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -305,6 +305,7 @@ static int serial_resume(struct pcmcia_device *link) static int serial_probe(struct pcmcia_device *link) { struct serial_info *info; + int ret; dev_dbg(&link->dev, "serial_attach()\n"); @@ -319,7 +320,15 @@ static int serial_probe(struct pcmcia_device *link) if (do_sound) link->config_flags |= CONF_ENABLE_SPKR; - return serial_config(link); + ret = serial_config(link); + if (ret) + goto free_info; + + return 0; + +free_info: + kfree(info); + return ret; } static void serial_detach(struct pcmcia_device *link) @@ -771,6 +780,7 @@ static const struct pcmcia_device_id serial_ids[] = { PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), + PCMCIA_DEVICE_PROD_ID12("Option International", "GSM-Ready 56K/ISDN", 0x9d7cd6f5, 0xb23844aa), PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), |