diff options
Diffstat (limited to 'drivers/net/wireless/bcmdhd_1363/include/proto/bcmevent.h')
| -rw-r--r-- | drivers/net/wireless/bcmdhd_1363/include/proto/bcmevent.h | 842 |
1 files changed, 842 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcmdhd_1363/include/proto/bcmevent.h b/drivers/net/wireless/bcmdhd_1363/include/proto/bcmevent.h new file mode 100644 index 000000000000..426ee5dfb425 --- /dev/null +++ b/drivers/net/wireless/bcmdhd_1363/include/proto/bcmevent.h @@ -0,0 +1,842 @@ +/* + * Broadcom Event protocol definitions + * + * Dependencies: proto/bcmeth.h + * + * Copyright (C) 1999-2017, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * + * <<Broadcom-WL-IPTag/Open:>> + * + * $Id: bcmevent.h 660193 2016-09-19 12:56:55Z $ + * + */ + +/* + * Broadcom Ethernet Events protocol defines + * + */ + +#ifndef _BCMEVENT_H_ +#define _BCMEVENT_H_ + +#include <typedefs.h> +/* #include <ethernet.h> -- TODO: req., excluded to overwhelming coupling (break up ethernet.h) */ +#include <proto/bcmeth.h> +#if defined(HEALTH_CHECK) || defined(DNGL_EVENT_SUPPORT) +#include <proto/dnglevent.h> +#endif /* HEALTH_CHECK || DNGL_EVENT_SUPPORT */ + +/* This marks the start of a packed structure section. */ +#include <packed_section_start.h> + +#define BCM_EVENT_MSG_VERSION 2 /* wl_event_msg_t struct version */ +#define BCM_MSG_IFNAME_MAX 16 /* max length of interface name */ + +/* flags */ +#define WLC_EVENT_MSG_LINK 0x01 /* link is up */ +#define WLC_EVENT_MSG_FLUSHTXQ 0x02 /* flush tx queue on MIC error */ +#define WLC_EVENT_MSG_GROUP 0x04 /* group MIC error */ +#define WLC_EVENT_MSG_UNKBSS 0x08 /* unknown source bsscfg */ +#define WLC_EVENT_MSG_UNKIF 0x10 /* unknown source OS i/f */ + +/* these fields are stored in network order */ + +/* version 1 */ +typedef BWL_PRE_PACKED_STRUCT struct +{ + uint16 version; + uint16 flags; /* see flags below */ + uint32 event_type; /* Message (see below) */ + uint32 status; /* Status code (see below) */ + uint32 reason; /* Reason code (if applicable) */ + uint32 auth_type; /* WLC_E_AUTH */ + uint32 datalen; /* data buf */ + struct ether_addr addr; /* Station address (if applicable) */ + char ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface */ +} BWL_POST_PACKED_STRUCT wl_event_msg_v1_t; + +/* the current version */ +typedef BWL_PRE_PACKED_STRUCT struct +{ + uint16 version; + uint16 flags; /* see flags below */ + uint32 event_type; /* Message (see below) */ + uint32 status; /* Status code (see below) */ + uint32 reason; /* Reason code (if applicable) */ + uint32 auth_type; /* WLC_E_AUTH */ + uint32 datalen; /* data buf */ + struct ether_addr addr; /* Station address (if applicable) */ + char ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface */ + uint8 ifidx; /* destination OS i/f index */ + uint8 bsscfgidx; /* source bsscfg index */ +} BWL_POST_PACKED_STRUCT wl_event_msg_t; + +/* used by driver msgs */ +typedef BWL_PRE_PACKED_STRUCT struct bcm_event { + struct ether_header eth; + bcmeth_hdr_t bcm_hdr; + wl_event_msg_t event; + /* data portion follows */ +} BWL_POST_PACKED_STRUCT bcm_event_t; + +/* + * used by host event + * note: if additional event types are added, it should go with is_wlc_event_frame() as well. + */ +typedef union bcm_event_msg_u { + wl_event_msg_t event; +#if defined(HEALTH_CHECK) || defined(DNGL_EVENT_SUPPORT) + bcm_dngl_event_msg_t dngl_event; +#endif /* HEALTH_CHECK || DNGL_EVENT_SUPPORT */ + + /* add new event here */ +} bcm_event_msg_u_t; + +#define BCM_MSG_LEN (sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header)) + +/* Event messages */ +#define WLC_E_SET_SSID 0 /* indicates status of set SSID */ +#define WLC_E_JOIN 1 /* differentiates join IBSS from found (WLC_E_START) IBSS */ +#define WLC_E_START 2 /* STA founded an IBSS or AP started a BSS */ +#define WLC_E_AUTH 3 /* 802.11 AUTH request */ +#define WLC_E_AUTH_IND 4 /* 802.11 AUTH indication */ +#define WLC_E_DEAUTH 5 /* 802.11 DEAUTH request */ +#define WLC_E_DEAUTH_IND 6 /* 802.11 DEAUTH indication */ +#define WLC_E_ASSOC 7 /* 802.11 ASSOC request */ +#define WLC_E_ASSOC_IND 8 /* 802.11 ASSOC indication */ +#define WLC_E_REASSOC 9 /* 802.11 REASSOC request */ +#define WLC_E_REASSOC_IND 10 /* 802.11 REASSOC indication */ +#define WLC_E_DISASSOC 11 /* 802.11 DISASSOC request */ +#define WLC_E_DISASSOC_IND 12 /* 802.11 DISASSOC indication */ +#define WLC_E_QUIET_START 13 /* 802.11h Quiet period started */ +#define WLC_E_QUIET_END 14 /* 802.11h Quiet period ended */ +#define WLC_E_BEACON_RX 15 /* BEACONS received/lost indication */ +#define WLC_E_LINK 16 /* generic link indication */ +#define WLC_E_MIC_ERROR 17 /* TKIP MIC error occurred */ +#define WLC_E_NDIS_LINK 18 /* NDIS style link indication */ +#define WLC_E_ROAM 19 /* roam complete: indicate status & reason */ +#define WLC_E_TXFAIL 20 /* change in dot11FailedCount (txfail) */ +#define WLC_E_PMKID_CACHE 21 /* WPA2 pmkid cache indication */ +#define WLC_E_RETROGRADE_TSF 22 /* current AP's TSF value went backward */ +#define WLC_E_PRUNE 23 /* AP was pruned from join list for reason */ +#define WLC_E_AUTOAUTH 24 /* report AutoAuth table entry match for join attempt */ +#define WLC_E_EAPOL_MSG 25 /* Event encapsulating an EAPOL message */ +#define WLC_E_SCAN_COMPLETE 26 /* Scan results are ready or scan was aborted */ +#define WLC_E_ADDTS_IND 27 /* indicate to host addts fail/success */ +#define WLC_E_DELTS_IND 28 /* indicate to host delts fail/success */ +#define WLC_E_BCNSENT_IND 29 /* indicate to host of beacon transmit */ +#define WLC_E_BCNRX_MSG 30 /* Send the received beacon up to the host */ +#define WLC_E_BCNLOST_MSG 31 /* indicate to host loss of beacon */ +#define WLC_E_ROAM_PREP 32 /* before attempting to roam association */ +#define WLC_E_PFN_NET_FOUND 33 /* PFN network found event */ +#define WLC_E_PFN_NET_LOST 34 /* PFN network lost event */ +#define WLC_E_RESET_COMPLETE 35 +#define WLC_E_JOIN_START 36 +#define WLC_E_ROAM_START 37 /* roam attempt started: indicate reason */ +#define WLC_E_ASSOC_START 38 +#define WLC_E_IBSS_ASSOC 39 +#define WLC_E_RADIO 40 +#define WLC_E_PSM_WATCHDOG 41 /* PSM microcode watchdog fired */ +#define WLC_E_PROBREQ_MSG 44 /* probe request received */ +#define WLC_E_SCAN_CONFIRM_IND 45 +#define WLC_E_PSK_SUP 46 /* WPA Handshake fail */ +#define WLC_E_COUNTRY_CODE_CHANGED 47 +#define WLC_E_EXCEEDED_MEDIUM_TIME 48 /* WMMAC excedded medium time */ +#define WLC_E_ICV_ERROR 49 /* WEP ICV error occurred */ +#define WLC_E_UNICAST_DECODE_ERROR 50 /* Unsupported unicast encrypted frame */ +#define WLC_E_MULTICAST_DECODE_ERROR 51 /* Unsupported multicast encrypted frame */ +#define WLC_E_TRACE 52 +#define WLC_E_IF 54 /* I/F change (for dongle host notification) */ +#define WLC_E_P2P_DISC_LISTEN_COMPLETE 55 /* listen state expires */ +#define WLC_E_RSSI 56 /* indicate RSSI change based on configured levels */ +#define WLC_E_PFN_BEST_BATCHING 57 /* PFN best network batching event */ +#define WLC_E_EXTLOG_MSG 58 +#define WLC_E_ACTION_FRAME 59 /* Action frame Rx */ +#define WLC_E_ACTION_FRAME_COMPLETE 60 /* Action frame Tx complete */ +#define WLC_E_PRE_ASSOC_IND 61 /* assoc request received */ +#define WLC_E_PRE_REASSOC_IND 62 /* re-assoc request received */ +#define WLC_E_CHANNEL_ADOPTED 63 +#define WLC_E_AP_STARTED 64 /* AP started */ +#define WLC_E_DFS_AP_STOP 65 /* AP stopped due to DFS */ +#define WLC_E_DFS_AP_RESUME 66 /* AP resumed due to DFS */ +#define WLC_E_WAI_STA_EVENT 67 /* WAI stations event */ +#define WLC_E_WAI_MSG 68 /* event encapsulating an WAI message */ +#define WLC_E_ESCAN_RESULT 69 /* escan result event */ +#define WLC_E_ACTION_FRAME_OFF_CHAN_COMPLETE 70 /* action frame off channel complete */ +#define WLC_E_PROBRESP_MSG 71 /* probe response received */ +#define WLC_E_P2P_PROBREQ_MSG 72 /* P2P Probe request received */ +#define WLC_E_DCS_REQUEST 73 +#define WLC_E_FIFO_CREDIT_MAP 74 /* credits for D11 FIFOs. [AC0,AC1,AC2,AC3,BC_MC,ATIM] */ +#define WLC_E_ACTION_FRAME_RX 75 /* Received action frame event WITH + * wl_event_rx_frame_data_t header + */ +#define WLC_E_WAKE_EVENT 76 /* Wake Event timer fired, used for wake WLAN test mode */ +#define WLC_E_RM_COMPLETE 77 /* Radio measurement complete */ +#define WLC_E_HTSFSYNC 78 /* Synchronize TSF with the host */ +#define WLC_E_OVERLAY_REQ 79 /* request an overlay IOCTL/iovar from the host */ +#define WLC_E_CSA_COMPLETE_IND 80 /* 802.11 CHANNEL SWITCH ACTION completed */ +#define WLC_E_EXCESS_PM_WAKE_EVENT 81 /* excess PM Wake Event to inform host */ +#define WLC_E_PFN_SCAN_NONE 82 /* no PFN networks around */ +/* PFN BSSID network found event, conflict/share with WLC_E_PFN_SCAN_NONE */ +#define WLC_E_PFN_BSSID_NET_FOUND 82 +#define WLC_E_PFN_SCAN_ALLGONE 83 /* last found PFN network gets lost */ +/* PFN BSSID network lost event, conflict/share with WLC_E_PFN_SCAN_ALLGONE */ +#define WLC_E_PFN_BSSID_NET_LOST 83 +#define WLC_E_GTK_PLUMBED 84 +#define WLC_E_ASSOC_IND_NDIS 85 /* 802.11 ASSOC indication for NDIS only */ +#define WLC_E_REASSOC_IND_NDIS 86 /* 802.11 REASSOC indication for NDIS only */ +#define WLC_E_ASSOC_REQ_IE 87 +#define WLC_E_ASSOC_RESP_IE 88 +#define WLC_E_ASSOC_RECREATED 89 /* association recreated on resume */ +#define WLC_E_ACTION_FRAME_RX_NDIS 90 /* rx action frame event for NDIS only */ +#define WLC_E_AUTH_REQ 91 /* authentication request received */ +#define WLC_E_TDLS_PEER_EVENT 92 /* discovered peer, connected/disconnected peer */ +#define WLC_E_SPEEDY_RECREATE_FAIL 93 /* fast assoc recreation failed */ +#define WLC_E_NATIVE 94 /* port-specific event and payload (e.g. NDIS) */ +#define WLC_E_PKTDELAY_IND 95 /* event for tx pkt delay suddently jump */ +#define WLC_E_PSTA_PRIMARY_INTF_IND 99 /* psta primary interface indication */ +#define WLC_E_NAN 100 /* NAN event */ +#define WLC_E_BEACON_FRAME_RX 101 +#define WLC_E_SERVICE_FOUND 102 /* desired service found */ +#define WLC_E_GAS_FRAGMENT_RX 103 /* GAS fragment received */ +#define WLC_E_GAS_COMPLETE 104 /* GAS sessions all complete */ +#define WLC_E_P2PO_ADD_DEVICE 105 /* New device found by p2p offload */ +#define WLC_E_P2PO_DEL_DEVICE 106 /* device has been removed by p2p offload */ +#define WLC_E_WNM_STA_SLEEP 107 /* WNM event to notify STA enter sleep mode */ +#define WLC_E_TXFAIL_THRESH 108 /* Indication of MAC tx failures (exhaustion of + * 802.11 retries) exceeding threshold(s) + */ +#define WLC_E_PROXD 109 /* Proximity Detection event */ +#define WLC_E_IBSS_COALESCE 110 /* IBSS Coalescing */ +#define WLC_E_AIBSS_TXFAIL 110 /* TXFAIL event for AIBSS, re using event 110 */ +#define WLC_E_BSS_LOAD 114 /* Inform host of beacon bss load */ +#define WLC_E_MIMO_PWR_SAVE 115 /* Inform host MIMO PWR SAVE learning events */ +#define WLC_E_LEAKY_AP_STATS 116 /* Inform host leaky Ap stats events */ +#define WLC_E_ALLOW_CREDIT_BORROW 117 /* Allow or disallow wlfc credit borrowing in DHD */ +#define WLC_E_MSCH 120 /* Multiple channel scheduler event */ +#define WLC_E_CSA_START_IND 121 +#define WLC_E_CSA_DONE_IND 122 +#define WLC_E_CSA_FAILURE_IND 123 +#define WLC_E_CCA_CHAN_QUAL 124 /* CCA based channel quality report */ +#define WLC_E_BSSID 125 /* to report change in BSSID while roaming */ +#define WLC_E_TX_STAT_ERROR 126 /* tx error indication */ +#define WLC_E_BCMC_CREDIT_SUPPORT 127 /* credit check for BCMC supported */ +#define WLC_E_PEER_TIMEOUT 128 /* silently drop a STA because of inactivity */ +#define WLC_E_BT_WIFI_HANDOVER_REQ 130 /* Handover Request Initiated */ +#define WLC_E_SPW_TXINHIBIT 131 /* Southpaw TxInhibit notification */ +#define WLC_E_FBT_AUTH_REQ_IND 132 /* FBT Authentication Request Indication */ +#define WLC_E_RSSI_LQM 133 /* Enhancement addition for WLC_E_RSSI */ +#define WLC_E_PFN_GSCAN_FULL_RESULT 134 /* Full probe/beacon (IEs etc) results */ +#define WLC_E_PFN_SWC 135 /* Significant change in rssi of bssids being tracked */ +#define WLC_E_AUTHORIZED 136 /* a STA been authroized for traffic */ +#define WLC_E_PROBREQ_MSG_RX 137 /* probe req with wl_event_rx_frame_data_t header */ +#define WLC_E_PFN_SCAN_COMPLETE 138 /* PFN completed scan of network list */ +#define WLC_E_RMC_EVENT 139 /* RMC Event */ +#define WLC_E_DPSTA_INTF_IND 140 /* DPSTA interface indication */ +#define WLC_E_RRM 141 /* RRM Event */ +#define WLC_E_PFN_SSID_EXT 142 /* SSID EXT event */ +#define WLC_E_ROAM_EXP_EVENT 143 /* Expanded roam event */ +#define WLC_E_ULP 146 /* ULP entered indication */ +#define WLC_E_MACDBG 147 /* Ucode debugging event */ +#define WLC_E_RESERVED 148 /* reserved */ +#define WLC_E_PRE_ASSOC_RSEP_IND 149 /* assoc resp received */ +#define WLC_E_PSK_AUTH 150 /* PSK AUTH WPA2-PSK 4 WAY Handshake failure */ +#define WLC_E_TKO 151 /* TCP keepalive offload */ +#define WLC_E_SDB_TRANSITION 152 /* SDB mode-switch event */ +#define WLC_E_NATOE_NFCT 153 /* natoe event */ +#define WLC_E_TEMP_THROTTLE 154 /* Temperature throttling control event */ +#define WLC_E_LINK_QUALITY 155 /* Link quality measurement complete */ +#define WLC_E_BSSTRANS_RESP 156 /* BSS Transition Response received */ +#define WLC_E_HE_TWT_SETUP 157 /* HE TWT Setup Complete event */ +#define WLC_E_NAN_DATA_IND 158 /* NAN 2.0 data indication */ +#define WLC_E_NAN_DATA_CONF 159 /* NAN 2.0 data confirmation */ +#define WLC_E_RADAR_DETECTED 160 /* Radar Detected event */ +#define WLC_E_RANGING_EVENT 161 /* Ranging event */ +#define WLC_E_INVALID_IE 162 /* Received invalid IE */ +#define WLC_E_MODE_SWITCH 163 /* Mode switch event */ +#define WLC_E_PKT_FILTER 164 /* Packet filter event */ +#define WLC_E_DMA_TXFLUSH_COMPLETE 165 /* TxFlush done before changing + * tx/rxchain + */ +#define WLC_E_LAST 166 /* highest val + 1 for range checking */ +#if (WLC_E_LAST > 166) +#error "WLC_E_LAST: Invalid value for last event; must be <= 165." +#endif /* WLC_E_LAST */ + +/* define an API for getting the string name of an event */ +extern const char *bcmevent_get_name(uint event_type); +extern void wl_event_to_host_order(wl_event_msg_t * evt); +extern void wl_event_to_network_order(wl_event_msg_t * evt); + +/* validate if the event is proper and if valid copy event header to event */ +extern int is_wlc_event_frame(void *pktdata, uint pktlen, uint16 exp_usr_subtype, + bcm_event_msg_u_t *out_event); + +/* conversion between host and network order for events */ +void wl_event_to_host_order(wl_event_msg_t * evt); +void wl_event_to_network_order(wl_event_msg_t * evt); + + +/* Event status codes */ +#define WLC_E_STATUS_SUCCESS 0 /* operation was successful */ +#define WLC_E_STATUS_FAIL 1 /* operation failed */ +#define WLC_E_STATUS_TIMEOUT 2 /* operation timed out */ +#define WLC_E_STATUS_NO_NETWORKS 3 /* failed due to no matching network found */ +#define WLC_E_STATUS_ABORT 4 /* operation was aborted */ +#define WLC_E_STATUS_NO_ACK 5 /* protocol failure: packet not ack'd */ +#define WLC_E_STATUS_UNSOLICITED 6 /* AUTH or ASSOC packet was unsolicited */ +#define WLC_E_STATUS_ATTEMPT 7 /* attempt to assoc to an auto auth configuration */ +#define WLC_E_STATUS_PARTIAL 8 /* scan results are incomplete */ +#define WLC_E_STATUS_NEWSCAN 9 /* scan aborted by another scan */ +#define WLC_E_STATUS_NEWASSOC 10 /* scan aborted due to assoc in progress */ +#define WLC_E_STATUS_11HQUIET 11 /* 802.11h quiet period started */ +#define WLC_E_STATUS_SUPPRESS 12 /* user disabled scanning (WLC_SET_SCANSUPPRESS) */ +#define WLC_E_STATUS_NOCHANS 13 /* no allowable channels to scan */ +#define WLC_E_STATUS_CS_ABORT 15 /* abort channel select */ +#define WLC_E_STATUS_ERROR 16 /* request failed due to error */ +#define WLC_E_STATUS_INVALID 0xff /* Invalid status code to init variables. */ + +/* 4-way handshake event type */ +#define WLC_E_PSK_AUTH_SUB_EAPOL_START 1 /* EAPOL start */ +#define WLC_E_PSK_AUTH_SUB_EAPOL_DONE 2 /* EAPOL end */ +/* GTK event type */ +#define WLC_E_PSK_AUTH_SUB_GTK_DONE 3 /* GTK end */ + +/* 4-way handshake event status code */ +#define WLC_E_STATUS_PSK_AUTH_WPA_TIMOUT 1 /* operation timed out */ +#define WLC_E_STATUS_PSK_AUTH_MIC_WPA_ERR 2 /* MIC error */ +#define WLC_E_STATUS_PSK_AUTH_IE_MISMATCH_ERR 3 /* IE Missmatch error */ +#define WLC_E_STATUS_PSK_AUTH_REPLAY_COUNT_ERR 4 +#define WLC_E_STATUS_PSK_AUTH_PEER_BLACKISTED 5 /* Blaclisted peer */ +#define WLC_E_STATUS_PSK_AUTH_GTK_REKEY_FAIL 6 /* GTK event status code */ + +/* SDB transition status code */ +#define WLC_E_STATUS_SDB_START 1 +#define WLC_E_STATUS_SDB_COMPLETE 2 + +/* SDB transition reason code */ +#define WLC_E_REASON_HOST_DIRECT 0 +#define WLC_E_REASON_INFRA_ASSOC 1 +#define WLC_E_REASON_INFRA_ROAM 2 +#define WLC_E_REASON_INFRA_DISASSOC 3 +#define WLC_E_REASON_NO_MODE_CHANGE_NEEDED 4 + +/* WLC_E_SDB_TRANSITION event data */ +#define WL_MAX_BSSCFG 4 +#define WL_EVENT_SDB_TRANSITION_VER 1 +typedef struct wl_event_sdb_data { + uint8 wlunit; /* Core index */ + uint8 is_iftype; /* Interface Type(Station, SoftAP, P2P_GO, P2P_GC */ + uint16 chanspec; /* Interface Channel/Chanspec */ + char ssidbuf[(4 * 32) + 1]; /* SSID_FMT_BUF_LEN: ((4 * DOT11_MAX_SSID_LEN) + 1) */ +} wl_event_sdb_data_t; + +typedef struct wl_event_sdb_trans { + uint8 version; /* Event Data Version */ + uint8 rsdb_mode; + uint8 enable_bsscfg; + uint8 reserved; + struct wl_event_sdb_data values[WL_MAX_BSSCFG]; +} wl_event_sdb_trans_t; + +/* roam reason codes */ +#define WLC_E_REASON_INITIAL_ASSOC 0 /* initial assoc */ +#define WLC_E_REASON_LOW_RSSI 1 /* roamed due to low RSSI */ +#define WLC_E_REASON_DEAUTH 2 /* roamed due to DEAUTH indication */ +#define WLC_E_REASON_DISASSOC 3 /* roamed due to DISASSOC indication */ +#define WLC_E_REASON_BCNS_LOST 4 /* roamed due to lost beacons */ + +#define WLC_E_REASON_FAST_ROAM_FAILED 5 /* roamed due to fast roam failure */ +#define WLC_E_REASON_DIRECTED_ROAM 6 /* roamed due to request by AP */ +#define WLC_E_REASON_TSPEC_REJECTED 7 /* roamed due to TSPEC rejection */ +#define WLC_E_REASON_BETTER_AP 8 /* roamed due to finding better AP */ +#define WLC_E_REASON_MINTXRATE 9 /* roamed because at mintxrate for too long */ +#define WLC_E_REASON_TXFAIL 10 /* We can hear AP, but AP can't hear us */ +/* retained for precommit auto-merging errors; remove once all branches are synced */ +#define WLC_E_REASON_REQUESTED_ROAM 11 +#define WLC_E_REASON_BSSTRANS_REQ 11 /* roamed due to BSS Transition request by AP */ +#define WLC_E_REASON_LOW_RSSI_CU 12 /* roamed due to low RSSI and Channel Usage */ +#define WLC_E_REASON_RADAR_DETECTED 13 /* roamed due to radar detection by STA */ + +/* prune reason codes */ +#define WLC_E_PRUNE_ENCR_MISMATCH 1 /* encryption mismatch */ +#define WLC_E_PRUNE_BCAST_BSSID 2 /* AP uses a broadcast BSSID */ +#define WLC_E_PRUNE_MAC_DENY 3 /* STA's MAC addr is in AP's MAC deny list */ +#define WLC_E_PRUNE_MAC_NA 4 /* STA's MAC addr is not in AP's MAC allow list */ +#define WLC_E_PRUNE_REG_PASSV 5 /* AP not allowed due to regulatory restriction */ +#define WLC_E_PRUNE_SPCT_MGMT 6 /* AP does not support STA locale spectrum mgmt */ +#define WLC_E_PRUNE_RADAR 7 /* AP is on a radar channel of STA locale */ +#define WLC_E_RSN_MISMATCH 8 /* STA does not support AP's RSN */ +#define WLC_E_PRUNE_NO_COMMON_RATES 9 /* No rates in common with AP */ +#define WLC_E_PRUNE_BASIC_RATES 10 /* STA does not support all basic rates of BSS */ +#define WLC_E_PRUNE_CIPHER_NA 12 /* BSS's cipher not supported */ +#define WLC_E_PRUNE_KNOWN_STA 13 /* AP is already known to us as a STA */ +#define WLC_E_PRUNE_WDS_PEER 15 /* AP is already known to us as a WDS peer */ +#define WLC_E_PRUNE_QBSS_LOAD 16 /* QBSS LOAD - AAC is too low */ +#define WLC_E_PRUNE_HOME_AP 17 /* prune home AP */ +#define WLC_E_PRUNE_AUTH_RESP_MAC 20 /* suppress auth resp by MAC filter */ + +/* WPA failure reason codes carried in the WLC_E_PSK_SUP event */ +#define WLC_E_SUP_OTHER 0 /* Other reason */ +#define WLC_E_SUP_DECRYPT_KEY_DATA 1 /* Decryption of key data failed */ +#define WLC_E_SUP_BAD_UCAST_WEP128 2 /* Illegal use of ucast WEP128 */ +#define WLC_E_SUP_BAD_UCAST_WEP40 3 /* Illegal use of ucast WEP40 */ +#define WLC_E_SUP_UNSUP_KEY_LEN 4 /* Unsupported key length */ +#define WLC_E_SUP_PW_KEY_CIPHER 5 /* Unicast cipher mismatch in pairwise key */ +#define WLC_E_SUP_MSG3_TOO_MANY_IE 6 /* WPA IE contains > 1 RSN IE in key msg 3 */ +#define WLC_E_SUP_MSG3_IE_MISMATCH 7 /* WPA IE mismatch in key message 3 */ +#define WLC_E_SUP_NO_INSTALL_FLAG 8 /* INSTALL flag unset in 4-way msg */ +#define WLC_E_SUP_MSG3_NO_GTK 9 /* encapsulated GTK missing from msg 3 */ +#define WLC_E_SUP_GRP_KEY_CIPHER 10 /* Multicast cipher mismatch in group key */ +#define WLC_E_SUP_GRP_MSG1_NO_GTK 11 /* encapsulated GTK missing from group msg 1 */ +#define WLC_E_SUP_GTK_DECRYPT_FAIL 12 /* GTK decrypt failure */ +#define WLC_E_SUP_SEND_FAIL 13 /* message send failure */ +#define WLC_E_SUP_DEAUTH 14 /* received FC_DEAUTH */ +#define WLC_E_SUP_WPA_PSK_TMO 15 /* WPA PSK 4-way handshake timeout */ +#define WLC_E_SUP_WPA_PSK_M1_TMO 16 /* WPA PSK 4-way handshake M1 timeout */ +#define WLC_E_SUP_WPA_PSK_M3_TMO 17 /* WPA PSK 4-way handshake M3 timeout */ + + +/* Ucode reason codes carried in the WLC_E_MACDBG event */ +#define WLC_E_MACDBG_LIST_PSM 0 /* Dump list update for PSM registers */ +#define WLC_E_MACDBG_LIST_PSMX 1 /* Dump list update for PSMx registers */ +#define WLC_E_MACDBG_REGALL 2 /* Dump all registers */ + +/* Event data for events that include frames received over the air */ +/* WLC_E_PROBRESP_MSG + * WLC_E_P2P_PROBREQ_MSG + * WLC_E_ACTION_FRAME_RX + */ +typedef BWL_PRE_PACKED_STRUCT struct wl_event_rx_frame_data { + uint16 version; + uint16 channel; /* Matches chanspec_t format from bcmwifi_channels.h */ + int32 rssi; + uint32 mactime; + uint32 rate; +} BWL_POST_PACKED_STRUCT wl_event_rx_frame_data_t; + +#define BCM_RX_FRAME_DATA_VERSION 1 + +/* WLC_E_IF event data */ +typedef struct wl_event_data_if { + uint8 ifidx; /* RTE virtual device index (for dongle) */ + uint8 opcode; /* see I/F opcode */ + uint8 reserved; /* bit mask (WLC_E_IF_FLAGS_XXX ) */ + uint8 bssidx; /* bsscfg index */ + uint8 role; /* see I/F role */ +} wl_event_data_if_t; + +/* WLC_E_NATOE event data */ +typedef struct wl_event_data_natoe { + uint32 natoe_active; + uint32 sta_ip; + uint16 start_port; + uint16 end_port; +} wl_event_data_natoe_t; + +/* opcode in WLC_E_IF event */ +#define WLC_E_IF_ADD 1 /* bsscfg add */ +#define WLC_E_IF_DEL 2 /* bsscfg delete */ +#define WLC_E_IF_CHANGE 3 /* bsscfg role change */ + +/* I/F role code in WLC_E_IF event */ +#define WLC_E_IF_ROLE_STA 0 /* Infra STA */ +#define WLC_E_IF_ROLE_AP 1 /* Access Point */ +#define WLC_E_IF_ROLE_WDS 2 /* WDS link */ +#define WLC_E_IF_ROLE_P2P_GO 3 /* P2P Group Owner */ +#define WLC_E_IF_ROLE_P2P_CLIENT 4 /* P2P Client */ +#define WLC_E_IF_ROLE_IBSS 8 /* IBSS */ +#define WLC_E_IF_ROLE_NAN 9 /* NAN */ + +/* WLC_E_RSSI event data */ +typedef struct wl_event_data_rssi { + int32 rssi; + int32 snr; + int32 noise; +} wl_event_data_rssi_t; + +/* WLC_E_IF flag */ +#define WLC_E_IF_FLAGS_BSSCFG_NOIF 0x1 /* no host I/F creation needed */ + +/* Reason codes for LINK */ +#define WLC_E_LINK_BCN_LOSS 1 /* Link down because of beacon loss */ +#define WLC_E_LINK_DISASSOC 2 /* Link down because of disassoc */ +#define WLC_E_LINK_ASSOC_REC 3 /* Link down because assoc recreate failed */ +#define WLC_E_LINK_BSSCFG_DIS 4 /* Link down due to bsscfg down */ + + +/* WLC_E_NDIS_LINK event data */ +typedef BWL_PRE_PACKED_STRUCT struct ndis_link_parms { + struct ether_addr peer_mac; /* 6 bytes */ + uint16 chanspec; /* 2 bytes */ + uint32 link_speed; /* current datarate in units of 500 Kbit/s */ + uint32 max_link_speed; /* max possible datarate for link in units of 500 Kbit/s */ + int32 rssi; /* average rssi */ +} BWL_POST_PACKED_STRUCT ndis_link_parms_t; + +/* reason codes for WLC_E_OVERLAY_REQ event */ +#define WLC_E_OVL_DOWNLOAD 0 /* overlay download request */ +#define WLC_E_OVL_UPDATE_IND 1 /* device indication of host overlay update */ + +/* reason codes for WLC_E_TDLS_PEER_EVENT event */ +#define WLC_E_TDLS_PEER_DISCOVERED 0 /* peer is ready to establish TDLS */ +#define WLC_E_TDLS_PEER_CONNECTED 1 +#define WLC_E_TDLS_PEER_DISCONNECTED 2 + +/* reason codes for WLC_E_RMC_EVENT event */ +#define WLC_E_REASON_RMC_NONE 0 +#define WLC_E_REASON_RMC_AR_LOST 1 +#define WLC_E_REASON_RMC_AR_NO_ACK 2 + +#ifdef WLTDLS +/* TDLS Action Category code */ +#define TDLS_AF_CATEGORY 12 +/* Wi-Fi Display (WFD) Vendor Specific Category */ +/* used for WFD Tunneled Probe Request and Response */ +#define TDLS_VENDOR_SPECIFIC 127 +/* TDLS Action Field Values */ +#define TDLS_ACTION_SETUP_REQ 0 +#define TDLS_ACTION_SETUP_RESP 1 +#define TDLS_ACTION_SETUP_CONFIRM 2 +#define TDLS_ACTION_TEARDOWN 3 +#define WLAN_TDLS_SET_PROBE_WFD_IE 11 +#define WLAN_TDLS_SET_SETUP_WFD_IE 12 +#define WLAN_TDLS_SET_WFD_ENABLED 13 +#define WLAN_TDLS_SET_WFD_DISABLED 14 +#endif + +/* WLC_E_RANGING_EVENT subtypes */ +#define WLC_E_RANGING_RESULTS 0 + + +/* GAS event data */ +typedef BWL_PRE_PACKED_STRUCT struct wl_event_gas { + uint16 channel; /* channel of GAS protocol */ + uint8 dialog_token; /* GAS dialog token */ + uint8 fragment_id; /* fragment id */ + uint16 status_code; /* status code on GAS completion */ + uint16 data_len; /* length of data to follow */ + uint8 data[1]; /* variable length specified by data_len */ +} BWL_POST_PACKED_STRUCT wl_event_gas_t; + +/* service discovery TLV */ +typedef BWL_PRE_PACKED_STRUCT struct wl_sd_tlv { + uint16 length; /* length of response_data */ + uint8 protocol; /* service protocol type */ + uint8 transaction_id; /* service transaction id */ + uint8 status_code; /* status code */ + uint8 data[1]; /* response data */ +} BWL_POST_PACKED_STRUCT wl_sd_tlv_t; + +/* service discovery event data */ +typedef BWL_PRE_PACKED_STRUCT struct wl_event_sd { + uint16 channel; /* channel */ + uint8 count; /* number of tlvs */ + wl_sd_tlv_t tlv[1]; /* service discovery TLV */ +} BWL_POST_PACKED_STRUCT wl_event_sd_t; + +/* WLC_E_PKT_FILTER event sub-classification codes */ +#define WLC_E_PKT_FILTER_TIMEOUT 1 /* Matching packet not received in last timeout seconds */ + +/* Note: proxd has a new API (ver 3.0) deprecates the following */ + +/* Reason codes for WLC_E_PROXD */ +#define WLC_E_PROXD_FOUND 1 /* Found a proximity device */ +#define WLC_E_PROXD_GONE 2 /* Lost a proximity device */ +#define WLC_E_PROXD_START 3 /* used by: target */ +#define WLC_E_PROXD_STOP 4 /* used by: target */ +#define WLC_E_PROXD_COMPLETED 5 /* used by: initiator completed */ +#define WLC_E_PROXD_ERROR 6 /* used by both initiator and target */ +#define WLC_E_PROXD_COLLECT_START 7 /* used by: target & initiator */ +#define WLC_E_PROXD_COLLECT_STOP 8 /* used by: target */ +#define WLC_E_PROXD_COLLECT_COMPLETED 9 /* used by: initiator completed */ +#define WLC_E_PROXD_COLLECT_ERROR 10 /* used by both initiator and target */ +#define WLC_E_PROXD_NAN_EVENT 11 /* used by both initiator and target */ +#define WLC_E_PROXD_TS_RESULTS 12 /* used by: initiator completed */ + +/* proxd_event data */ +typedef struct ftm_sample { + uint32 value; /* RTT in ns */ + int8 rssi; /* RSSI */ +} ftm_sample_t; + +typedef struct ts_sample { + uint32 t1; + uint32 t2; + uint32 t3; + uint32 t4; +} ts_sample_t; + +typedef BWL_PRE_PACKED_STRUCT struct proxd_event_data { + uint16 ver; /* version */ + uint16 mode; /* mode: target/initiator */ + uint16 method; /* method: rssi/TOF/AOA */ + uint8 err_code; /* error classification */ + uint8 TOF_type; /* one way or two way TOF */ + uint8 OFDM_frame_type; /* legacy or VHT */ + uint8 bandwidth; /* Bandwidth is 20, 40,80, MHZ */ + struct ether_addr peer_mac; /* (e.g for tgt:initiator's */ + uint32 distance; /* dst to tgt, units meter */ + uint32 meanrtt; /* mean delta */ + uint32 modertt; /* Mode delta */ + uint32 medianrtt; /* median RTT */ + uint32 sdrtt; /* Standard deviation of RTT */ + int32 gdcalcresult; /* Software or Hardware Kind of redundant, but if */ + /* frame type is VHT, then we should do it by hardware */ + int16 avg_rssi; /* avg rssi accroos the ftm frames */ + int16 validfrmcnt; /* Firmware's valid frame counts */ + int32 peer_router_info; /* Peer router information if available in TLV, */ + /* We will add this field later */ + int32 var1; /* average of group delay */ + int32 var2; /* average of threshold crossing */ + int32 var3; /* difference between group delay and threshold crossing */ + /* raw Fine Time Measurements (ftm) data */ + uint16 ftm_unit; /* ftm cnt resolution in picoseconds , 6250ps - default */ + uint16 ftm_cnt; /* num of rtd measurments/length in the ftm buffer */ + ftm_sample_t ftm_buff[1]; /* 1 ... ftm_cnt */ +} BWL_POST_PACKED_STRUCT wl_proxd_event_data_t; + +typedef BWL_PRE_PACKED_STRUCT struct proxd_event_ts_results { + uint16 ver; /* version */ + uint16 mode; /* mode: target/initiator */ + uint16 method; /* method: rssi/TOF/AOA */ + uint8 err_code; /* error classification */ + uint8 TOF_type; /* one way or two way TOF */ + uint16 ts_cnt; /* number of timestamp measurements */ + ts_sample_t ts_buff[1]; /* Timestamps */ +} BWL_POST_PACKED_STRUCT wl_proxd_event_ts_results_t; + + +/* Video Traffic Interference Monitor Event */ +#define INTFER_EVENT_VERSION 1 +#define INTFER_STREAM_TYPE_NONTCP 1 +#define INTFER_STREAM_TYPE_TCP 2 +#define WLINTFER_STATS_NSMPLS 4 +typedef struct wl_intfer_event { + uint16 version; /* version */ + uint16 status; /* status */ + uint8 txfail_histo[WLINTFER_STATS_NSMPLS]; /* txfail histo */ +} wl_intfer_event_t; + +#define RRM_EVENT_VERSION 0 +typedef struct wl_rrm_event { + int16 version; + int16 len; + int16 cat; /* Category */ + int16 subevent; + char payload[1]; /* Measurement payload */ +} wl_rrm_event_t; + + +/* WLC_E_PSTA_PRIMARY_INTF_IND event data */ +typedef struct wl_psta_primary_intf_event { + struct ether_addr prim_ea; /* primary intf ether addr */ +} wl_psta_primary_intf_event_t; + +/* WLC_E_DPSTA_INTF_IND event data */ +typedef enum { + WL_INTF_PSTA = 1, + WL_INTF_DWDS = 2 +} wl_dpsta_intf_type; + +typedef struct wl_dpsta_intf_event { + wl_dpsta_intf_type intf_type; /* dwds/psta intf register */ +} wl_dpsta_intf_event_t; + +/* ********** NAN protocol events/subevents ********** */ +#define NAN_EVENT_BUFFER_SIZE 512 /* max size */ +/* NAN Events sent by firmware */ +typedef enum wl_nan_events { + WL_NAN_EVENT_START = 1, /* NAN cluster started */ + WL_NAN_EVENT_JOIN = 2, /* Joined to a NAN cluster */ + WL_NAN_EVENT_ROLE = 3, /* Role changed */ + WL_NAN_EVENT_SCAN_COMPLETE = 4, + WL_NAN_EVENT_DISCOVERY_RESULT = 5, + WL_NAN_EVENT_REPLIED = 6, + WL_NAN_EVENT_TERMINATED = 7, /* the instance ID will be present in the ev data */ + WL_NAN_EVENT_RECEIVE = 8, + WL_NAN_EVENT_STATUS_CHG = 9, /* generated on any change in nan_mac status */ + WL_NAN_EVENT_MERGE = 10, /* Merged to a NAN cluster */ + WL_NAN_EVENT_STOP = 11, /* NAN stopped */ + WL_NAN_EVENT_P2P = 12, /* NAN P2P EVENT */ + WL_NAN_EVENT_WINDOW_BEGIN_P2P = 13, /* Event for begin of P2P further availability window */ + WL_NAN_EVENT_WINDOW_BEGIN_MESH = 14, + WL_NAN_EVENT_WINDOW_BEGIN_IBSS = 15, + WL_NAN_EVENT_WINDOW_BEGIN_RANGING = 16, + WL_NAN_EVENT_POST_DISC = 17, /* Event for post discovery data */ + WL_NAN_EVENT_DATA_IF_ADD = 18, /* Event for Data IF add */ + WL_NAN_EVENT_DATA_PEER_ADD = 19, /* Event for peer add */ + /* nan 2.0 */ + WL_NAN_EVENT_DATA_IND = 20, /* Will be removed after source code is committed. */ + WL_NAN_EVENT_PEER_DATAPATH_IND = 20, /* Peer's Datapath request Indication to Host */ + WL_NAN_EVENT_DATA_CONF = 21, /* Will be removed after source code is committed. */ + WL_NAN_EVENT_DATAPATH_ESTB = 21, /* Datapath Established to Host */ + WL_NAN_EVENT_SDF_RX = 22, /* entire service discovery frame */ + WL_NAN_EVENT_DATA_END = 23, /* Will be removed after source code is committed. */ + WL_NAN_EVENT_DATAPATH_END = 23, /* Data End to Host */ + WL_NAN_EVENT_BCN_RX = 24, /* received beacon payload */ + WL_NAN_EVENT_PEER_DATAPATH_RESP = 25, /* Peer's Data Response indication to Host */ + WL_NAN_EVENT_PEER_DATAPATH_CONF = 26, /* Peer's Data Confirm indication to Host */ + WL_NAN_EVENT_INVALID /* delimiter for max value */ +} nan_app_events_e; + +#define IS_NAN_EVT_ON(var, evt) ((var & (1 << (evt-1))) != 0) +/* ******************* end of NAN section *************** */ + +/* WLC_E_ULP event data */ +#define WL_ULP_EVENT_VERSION 1 +#define WL_ULP_DISABLE_CONSOLE 1 /* Disable console message on ULP entry */ +#define WL_ULP_UCODE_DOWNLOAD 2 /* Download ULP ucode file */ + +typedef struct wl_ulp_event { + uint16 version; + uint16 ulp_dongle_action; +} wl_ulp_event_t; + +/* TCP keepalive event data */ +typedef BWL_PRE_PACKED_STRUCT struct wl_event_tko { + uint8 index; /* TCP connection index, 0 to max-1 */ + uint8 pad[3]; /* 4-byte struct alignment */ +} BWL_POST_PACKED_STRUCT wl_event_tko_t; + +typedef struct { + uint8 radar_type; /* one of RADAR_TYPE_XXX */ + uint16 min_pw; /* minimum pulse-width (usec * 20) */ + uint16 max_pw; /* maximum pulse-width (usec * 20) */ + uint16 min_pri; /* minimum pulse repetition interval (usec) */ + uint16 max_pri; /* maximum pulse repetition interval (usec) */ + uint16 subband; /* subband/frequency */ +} radar_detected_event_info_t; +typedef struct wl_event_radar_detect_data { + + uint32 version; + uint16 current_chanspec; /* chanspec on which the radar is recieved */ + uint16 target_chanspec; /* Target chanspec after detection of radar on current_chanspec */ + radar_detected_event_info_t radar_info[2]; +} wl_event_radar_detect_data_t; + + +#define WL_EVENT_MODESW_VER_1 1 +#define WL_EVENT_MODESW_VER_CURRENT WL_EVENT_MODESW_VER_1 + +#define WL_E_MODESW_FLAG_MASK_DEVICE 0x01u /* mask of device: belongs to local or peer */ +#define WL_E_MODESW_FLAG_MASK_FROM 0x02u /* mask of origin: firmware or user */ +#define WL_E_MODESW_FLAG_MASK_STATE 0x0Cu /* mask of state: modesw progress state */ + +#define WL_E_MODESW_FLAG_DEVICE_LOCAL 0x00u /* flag - device: info is about self/local */ +#define WL_E_MODESW_FLAG_DEVICE_PEER 0x01u /* flag - device: info is about peer */ + +#define WL_E_MODESW_FLAG_FROM_FIRMWARE 0x00u /* flag - from: request is from firmware */ +#define WL_E_MODESW_FLAG_FROM_USER 0x02u /* flag - from: request is from user/iov */ + +#define WL_E_MODESW_FLAG_STATE_REQUESTED 0x00u /* flag - state: mode switch request */ +#define WL_E_MODESW_FLAG_STATE_INITIATED 0x04u /* flag - state: switch initiated */ +#define WL_E_MODESW_FLAG_STATE_COMPLETE 0x08u /* flag - state: switch completed/success */ +#define WL_E_MODESW_FLAG_STATE_FAILURE 0x0Cu /* flag - state: failed to switch */ + +/* Get sizeof *X including variable data's length where X is pointer to wl_event_mode_switch_t */ +#define WL_E_MODESW_SIZE(X) (sizeof(*(X)) + (X)->length) + +/* Get variable data's length where X is pointer to wl_event_mode_switch_t */ +#define WL_E_MODESW_DATA_SIZE(X) (((X)->length > sizeof(*(X))) ? ((X)->length - sizeof(*(X))) : 0) + +#define WL_E_MODESW_REASON_UNKNOWN 0u /* reason: UNKNOWN */ +#define WL_E_MODESW_REASON_ACSD 1u /* reason: ACSD (based on events from FW */ +#define WL_E_MODESW_REASON_OBSS_DBS 2u /* reason: OBSS DBS (eg. on interference) */ +#define WL_E_MODESW_REASON_DFS 3u /* reason: DFS (eg. on subband radar) */ +#define WL_E_MODESW_REASON_DYN160 4u /* reason: DYN160 (160/2x2 - 80/4x4) */ + +/* event structure for WLC_E_MODE_SWITCH */ +typedef struct { + uint16 version; + uint16 length; /* size including 'data' field */ + uint16 opmode_from; + uint16 opmode_to; + uint32 flags; /* bit 0: peer(/local==0); + * bit 1: user(/firmware==0); + * bits 3,2: 00==requested, 01==initiated, + * 10==complete, 11==failure; + * rest: reserved + */ + uint16 reason; /* value 0: unknown, 1: ACSD, 2: OBSS_DBS, + * 3: DFS, 4: DYN160, rest: reserved + */ + uint16 data_offset; /* offset to 'data' from beginning of this struct. + * fields may be added between data_offset and data + */ + /* ADD NEW FIELDS HERE */ + uint8 data[]; /* reason specific data; could be empty */ +} wl_event_mode_switch_t; + +/* when reason in WLC_E_MODE_SWITCH is DYN160, data will carry the following structure */ +typedef struct { + uint16 trigger; /* value 0: MU to SU, 1: SU to MU, 2: metric_dyn160, 3:re-/assoc, + * 4: disassoc, 5: rssi, 6: traffic, 7: interference, + * 8: chanim_stats + */ + struct ether_addr sta_addr; /* causal STA's MAC address when known */ + uint16 metric_160_80; /* latest dyn160 metric */ + uint8 nss; /* NSS of the STA */ + uint8 bw; /* BW of the STA */ + int8 rssi; /* RSSI of the STA */ + uint8 traffic; /* internal metric of traffic */ +} wl_event_mode_switch_dyn160; + +/* TWT Setup Completion is designed to notify the user of TWT Setup process + * status. When 'status' field is value of BCME_OK, the user must check the + * 'setup_cmd' field value in 'wl_twt_sdesc_t' structure that at the end of + * the event data to see the response from the TWT Responding STA; when + * 'status' field is value of BCME_ERROR or non BCME_OK, user must not use + * anything from 'wl_twt_sdesc_t' structure as it is the TWT Requesting STA's + * own TWT parameter. + */ + +#define WL_TWT_SETUP_CPLT_VER 0 + +/* TWT Setup Completion event data */ +typedef struct wl_twt_setup_cplt { + uint16 version; + uint16 length; /* the byte count of fields from 'dialog' onwards */ + uint8 dialog; /* the dialog token user supplied to the TWT setup API */ + uint8 pad[3]; + int32 status; + /* wl_twt_sdesc_t desc; - defined in wlioctl.h */ +} wl_twt_setup_cplt_t; + +#define WL_INVALID_IE_EVENT_VERSION 0 + +/* Invalid IE Event data */ +typedef struct wl_invalid_ie_event { + uint16 version; + uint16 len; /* Length of the invalid IE copy */ + uint16 type; /* Type/subtype of the frame which contains the invalid IE */ + uint16 error; /* error code of the wrong IE, defined in ie_error_code_t */ + uint8 ie[]; /* Variable length buffer for the invalid IE copy */ +} wl_invalid_ie_event_t; + +typedef enum ie_error_code { + IE_ERROR_OUT_OF_RANGE = 0x01 +} ie_error_code_t; +/* This marks the end of a packed structure section. */ +#include <packed_section_end.h> + +#endif /* _BCMEVENT_H_ */ |