diff options
Diffstat (limited to 'drivers/net/wireless/bcmdhd/dhd_sdio.c')
| -rw-r--r-- | drivers/net/wireless/bcmdhd/dhd_sdio.c | 8343 |
1 files changed, 8343 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcmdhd/dhd_sdio.c b/drivers/net/wireless/bcmdhd/dhd_sdio.c new file mode 100644 index 000000000000..61a2d9a268b0 --- /dev/null +++ b/drivers/net/wireless/bcmdhd/dhd_sdio.c @@ -0,0 +1,8343 @@ +/* + * DHD Bus Module for SDIO + * + * Copyright (C) 1999-2016, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * $Id: dhd_sdio.c 663157 2016-12-08 12:19:27Z $ + */ + +#include <typedefs.h> +#include <osl.h> +#include <bcmsdh.h> + +#ifdef BCMEMBEDIMAGE +#include BCMEMBEDIMAGE +#endif /* BCMEMBEDIMAGE */ + +#include <bcmdefs.h> +#include <bcmutils.h> +#include <bcmendian.h> +#include <bcmdevs.h> + +#include <siutils.h> +#include <hndpmu.h> +#include <hndsoc.h> +#include <bcmsdpcm.h> +#if defined(DHD_DEBUG) +#include <hndrte_armtrap.h> +#include <hndrte_cons.h> +#endif /* defined(DHD_DEBUG) */ +#include <sbchipc.h> +#include <sbhnddma.h> + +#include <sdio.h> +#include <sbsdio.h> +#include <sbsdpcmdev.h> +#include <bcmsdpcm.h> +#include <bcmsdbus.h> + +#include <proto/ethernet.h> +#include <proto/802.1d.h> +#include <proto/802.11.h> + +#include <dngl_stats.h> +#include <dhd.h> +#include <dhd_bus.h> +#include <dhd_proto.h> +#include <dhd_dbg.h> +#include <dhdioctl.h> +#include <sdiovar.h> + +/* Murata Work-around code for HT Avail failure (due to no external slow clk) */ +#define MURATA_WORKAROUND_FOR_HTAVAIL 1 + +#ifdef PROP_TXSTATUS +#include <dhd_wlfc.h> +#endif + +#ifdef DHDTCPACK_SUPPRESS +#include <dhd_ip.h> +#endif + +bool dhd_mp_halting(dhd_pub_t *dhdp); +extern void bcmsdh_waitfor_iodrain(void *sdh); +extern void bcmsdh_reject_ioreqs(void *sdh, bool reject); +extern bool bcmsdh_fatal_error(void *sdh); + +#ifndef DHDSDIO_MEM_DUMP_FNAME +#define DHDSDIO_MEM_DUMP_FNAME "mem_dump" +#endif + +#define QLEN (1024) /* bulk rx and tx queue lengths */ +#define FCHI (QLEN - 10) +#define FCLOW (FCHI / 2) +#define PRIOMASK 7 + +#define TXRETRIES 2 /* # of retries for tx frames */ +#define READ_FRM_CNT_RETRIES 3 +#ifndef DHD_RXBOUND +#define DHD_RXBOUND 50 /* Default for max rx frames in one scheduling */ +#endif + +#ifndef DHD_TXBOUND +#define DHD_TXBOUND 20 /* Default for max tx frames in one scheduling */ +#endif + +#define DHD_TXMINMAX 1 /* Max tx frames if rx still pending */ + +#define MEMBLOCK 2048 /* Block size used for downloading of dongle image */ +#define MAX_NVRAMBUF_SIZE 4096 /* max nvram buf size */ +#define MAX_DATA_BUF (64 * 1024) /* Must be large enough to hold biggest possible glom */ + +#ifndef DHD_FIRSTREAD +#define DHD_FIRSTREAD 32 +#endif +#if !ISPOWEROF2(DHD_FIRSTREAD) +#error DHD_FIRSTREAD is not a power of 2! +#endif + +/* Total length of frame header for dongle protocol */ +#define SDPCM_HDRLEN (SDPCM_FRAMETAG_LEN + SDPCM_SWHEADER_LEN) +#define SDPCM_HDRLEN_TXGLOM (SDPCM_HDRLEN + SDPCM_HWEXT_LEN) +#define MAX_TX_PKTCHAIN_CNT SDPCM_MAXGLOM_SIZE + +#ifdef SDTEST +#define SDPCM_RESERVE (SDPCM_HDRLEN + SDPCM_TEST_HDRLEN + DHD_SDALIGN) +#else +#define SDPCM_RESERVE (SDPCM_HDRLEN + DHD_SDALIGN) +#endif + +/* Space for header read, limit for data packets */ +#ifndef MAX_HDR_READ +#define MAX_HDR_READ 32 +#endif +#if !ISPOWEROF2(MAX_HDR_READ) +#error MAX_HDR_READ is not a power of 2! +#endif + +#define MAX_RX_DATASZ 2048 + +/* Maximum milliseconds to wait for F2 to come up */ +#define DHD_WAIT_F2RDY 3000 + +/* Bump up limit on waiting for HT to account for first startup; + * if the image is doing a CRC calculation before programming the PMU + * for HT availability, it could take a couple hundred ms more, so + * max out at a 1 second (1000000us). + */ +#if (PMU_MAX_TRANSITION_DLY <= 1000000) +#undef PMU_MAX_TRANSITION_DLY +#define PMU_MAX_TRANSITION_DLY 1000000 +#define PMU_TRANSITION_DLY_EXTRA 500000 +#endif + +/* hooks for limiting threshold custom tx num in rx processing */ +#define DEFAULT_TXINRX_THRES 0 +#ifndef CUSTOM_TXINRX_THRES +#define CUSTOM_TXINRX_THRES DEFAULT_TXINRX_THRES +#endif + +/* Value for ChipClockCSR during initial setup */ +#define DHD_INIT_CLKCTL1 (SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ) +#define DHD_INIT_CLKCTL2 (SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP) + +/* Flags for SDH calls */ +#define F2SYNC (SDIO_REQ_4BYTE | SDIO_REQ_FIXED) + +/* Packet free applicable unconditionally for sdio and sdspi. Conditional if + * bufpool was present for gspi bus. + */ +#define PKTFREE2() if ((bus->bus != SPI_BUS) || bus->usebufpool) \ + PKTFREE(bus->dhd->osh, pkt, FALSE); +DHD_SPINWAIT_SLEEP_INIT(sdioh_spinwait_sleep); + + +#ifdef DHD_DEBUG +/* Device console log buffer state */ +#define CONSOLE_LINE_MAX 192 +#define CONSOLE_BUFFER_MAX 2024 +typedef struct dhd_console { + uint count; /* Poll interval msec counter */ + uint log_addr; /* Log struct address (fixed) */ + hndrte_log_t log; /* Log struct (host copy) */ + uint bufsize; /* Size of log buffer */ + uint8 *buf; /* Log buffer (host copy) */ + uint last; /* Last buffer read index */ +} dhd_console_t; +#endif /* DHD_DEBUG */ + +#define REMAP_ENAB(bus) ((bus)->remap) +#define REMAP_ISADDR(bus, a) (((a) >= ((bus)->orig_ramsize)) && ((a) < ((bus)->ramsize))) +#define KSO_ENAB(bus) ((bus)->kso) +#define SR_ENAB(bus) ((bus)->_srenab) +#define SLPAUTO_ENAB(bus) ((SR_ENAB(bus)) && ((bus)->_slpauto)) +#define MIN_RSRC_ADDR (SI_ENUM_BASE + 0x618) +#define MIN_RSRC_SR 0x3 +#define CORE_CAPEXT_ADDR (SI_ENUM_BASE + 0x64c) +#define CORE_CAPEXT_SR_SUPPORTED_MASK (1 << 1) +#define RCTL_MACPHY_DISABLE_MASK (1 << 26) +#define RCTL_LOGIC_DISABLE_MASK (1 << 27) + +#define OOB_WAKEUP_ENAB(bus) ((bus)->_oobwakeup) +#define GPIO_DEV_SRSTATE 16 /* Host gpio17 mapped to device gpio0 SR state */ +#define GPIO_DEV_SRSTATE_TIMEOUT 320000 /* 320ms */ +#define GPIO_DEV_WAKEUP 17 /* Host gpio17 mapped to device gpio1 wakeup */ +#define CC_CHIPCTRL2_GPIO1_WAKEUP (1 << 0) +#define CC_CHIPCTRL3_SR_ENG_ENABLE (1 << 2) +#define OVERFLOW_BLKSZ512_WM 96 +#define OVERFLOW_BLKSZ512_MES 80 + +#define CC_PMUCC3 (0x3) +/* Private data for SDIO bus interaction */ +typedef struct dhd_bus { + dhd_pub_t *dhd; + + bcmsdh_info_t *sdh; /* Handle for BCMSDH calls */ + si_t *sih; /* Handle for SI calls */ + char *vars; /* Variables (from CIS and/or other) */ + uint varsz; /* Size of variables buffer */ + uint32 sbaddr; /* Current SB window pointer (-1, invalid) */ + + sdpcmd_regs_t *regs; /* Registers for SDIO core */ + uint sdpcmrev; /* SDIO core revision */ + uint armrev; /* CPU core revision */ + uint ramrev; /* SOCRAM core revision */ + uint32 ramsize; /* Size of RAM in SOCRAM (bytes) */ + uint32 orig_ramsize; /* Size of RAM in SOCRAM (bytes) */ + uint32 srmemsize; /* Size of SRMEM */ + + uint32 bus; /* gSPI or SDIO bus */ + uint32 bus_num; /* bus number */ + uint32 slot_num; /* slot ID */ + uint32 hostintmask; /* Copy of Host Interrupt Mask */ + uint32 intstatus; /* Intstatus bits (events) pending */ + bool dpc_sched; /* Indicates DPC schedule (intrpt rcvd) */ + bool fcstate; /* State of dongle flow-control */ + + uint16 cl_devid; /* cached devid for dhdsdio_probe_attach() */ + char *fw_path; /* module_param: path to firmware image */ + char *nv_path; /* module_param: path to nvram vars file */ + const char *nvram_params; /* user specified nvram params. */ + + uint blocksize; /* Block size of SDIO transfers */ + uint roundup; /* Max roundup limit */ + + struct pktq txq; /* Queue length used for flow-control */ + uint8 flowcontrol; /* per prio flow control bitmask */ + uint8 tx_seq; /* Transmit sequence number (next) */ + uint8 tx_max; /* Maximum transmit sequence allowed */ + + uint8 hdrbuf[MAX_HDR_READ + DHD_SDALIGN]; + uint8 *rxhdr; /* Header of current rx frame (in hdrbuf) */ + uint16 nextlen; /* Next Read Len from last header */ + uint8 rx_seq; /* Receive sequence number (expected) */ + bool rxskip; /* Skip receive (awaiting NAK ACK) */ + + void *glomd; /* Packet containing glomming descriptor */ + void *glom; /* Packet chain for glommed superframe */ + uint glomerr; /* Glom packet read errors */ + + uint8 *rxbuf; /* Buffer for receiving control packets */ + uint rxblen; /* Allocated length of rxbuf */ + uint8 *rxctl; /* Aligned pointer into rxbuf */ + uint8 *databuf; /* Buffer for receiving big glom packet */ + uint8 *dataptr; /* Aligned pointer into databuf */ + uint rxlen; /* Length of valid data in buffer */ + + uint8 sdpcm_ver; /* Bus protocol reported by dongle */ + + bool intr; /* Use interrupts */ + bool poll; /* Use polling */ + bool ipend; /* Device interrupt is pending */ + bool intdis; /* Interrupts disabled by isr */ + uint intrcount; /* Count of device interrupt callbacks */ + uint lastintrs; /* Count as of last watchdog timer */ + uint spurious; /* Count of spurious interrupts */ + uint pollrate; /* Ticks between device polls */ + uint polltick; /* Tick counter */ + uint pollcnt; /* Count of active polls */ + +#ifdef DHD_DEBUG + dhd_console_t console; /* Console output polling support */ + uint console_addr; /* Console address from shared struct */ +#endif /* DHD_DEBUG */ + + uint regfails; /* Count of R_REG/W_REG failures */ + + uint clkstate; /* State of sd and backplane clock(s) */ + bool activity; /* Activity flag for clock down */ + int32 idletime; /* Control for activity timeout */ + int32 idlecount; /* Activity timeout counter */ + int32 idleclock; /* How to set bus driver when idle */ + int32 sd_divisor; /* Speed control to bus driver */ + int32 sd_mode; /* Mode control to bus driver */ + int32 sd_rxchain; /* If bcmsdh api accepts PKT chains */ + bool use_rxchain; /* If dhd should use PKT chains */ + bool sleeping; /* Is SDIO bus sleeping? */ +#if defined(SUPPORT_P2P_GO_PS) + wait_queue_head_t bus_sleep; +#endif /* LINUX && (SUPPORT_P2P_GO_PS || !OEM_ANDROID) */ + uint rxflow_mode; /* Rx flow control mode */ + bool rxflow; /* Is rx flow control on */ + uint prev_rxlim_hit; /* Is prev rx limit exceeded (per dpc schedule) */ + bool alp_only; /* Don't use HT clock (ALP only) */ + /* Field to decide if rx of control frames happen in rxbuf or lb-pool */ + bool usebufpool; + int32 txinrx_thres; /* num of in-queued pkts */ + int32 dotxinrx; /* tx first in dhdsdio_readframes */ +#ifdef SDTEST + /* external loopback */ + bool ext_loop; + uint8 loopid; + + /* pktgen configuration */ + uint pktgen_freq; /* Ticks between bursts */ + uint pktgen_count; /* Packets to send each burst */ + uint pktgen_print; /* Bursts between count displays */ + uint pktgen_total; /* Stop after this many */ + uint pktgen_minlen; /* Minimum packet data len */ + uint pktgen_maxlen; /* Maximum packet data len */ + uint pktgen_mode; /* Configured mode: tx, rx, or echo */ + uint pktgen_stop; /* Number of tx failures causing stop */ + + /* active pktgen fields */ + uint pktgen_tick; /* Tick counter for bursts */ + uint pktgen_ptick; /* Burst counter for printing */ + uint pktgen_sent; /* Number of test packets generated */ + uint pktgen_rcvd; /* Number of test packets received */ + uint pktgen_prev_time; /* Time at which previous stats where printed */ + uint pktgen_prev_sent; /* Number of test packets generated when + * previous stats were printed + */ + uint pktgen_prev_rcvd; /* Number of test packets received when + * previous stats were printed + */ + uint pktgen_fail; /* Number of failed send attempts */ + uint16 pktgen_len; /* Length of next packet to send */ +#define PKTGEN_RCV_IDLE (0) +#define PKTGEN_RCV_ONGOING (1) + uint16 pktgen_rcv_state; /* receive state */ + uint pktgen_rcvd_rcvsession; /* test pkts rcvd per rcv session. */ +#endif /* SDTEST */ + + /* Some additional counters */ + uint tx_sderrs; /* Count of tx attempts with sd errors */ + uint fcqueued; /* Tx packets that got queued */ + uint rxrtx; /* Count of rtx requests (NAK to dongle) */ + uint rx_toolong; /* Receive frames too long to receive */ + uint rxc_errors; /* SDIO errors when reading control frames */ + uint rx_hdrfail; /* SDIO errors on header reads */ + uint rx_badhdr; /* Bad received headers (roosync?) */ + uint rx_badseq; /* Mismatched rx sequence number */ + uint fc_rcvd; /* Number of flow-control events received */ + uint fc_xoff; /* Number which turned on flow-control */ + uint fc_xon; /* Number which turned off flow-control */ + uint rxglomfail; /* Failed deglom attempts */ + uint rxglomframes; /* Number of glom frames (superframes) */ + uint rxglompkts; /* Number of packets from glom frames */ + uint f2rxhdrs; /* Number of header reads */ + uint f2rxdata; /* Number of frame data reads */ + uint f2txdata; /* Number of f2 frame writes */ + uint f1regdata; /* Number of f1 register accesses */ +#ifdef DHDENABLE_TAILPAD + uint tx_tailpad_chain; /* Number of tail padding by chaining pad_pkt */ + uint tx_tailpad_pktget; /* Number of tail padding by new PKTGET */ +#endif + uint8 *ctrl_frame_buf; + uint32 ctrl_frame_len; + bool ctrl_frame_stat; + uint32 rxint_mode; /* rx interrupt mode */ + bool remap; /* Contiguous 1MB RAM: 512K socram + 512K devram + * Available with socram rev 16 + * Remap region not DMA-able + */ + bool kso; + bool _slpauto; + bool _oobwakeup; + bool _srenab; + bool readframes; + bool reqbussleep; + uint32 resetinstr; + uint32 dongle_ram_base; + + void *glom_pkt_arr[SDPCM_MAXGLOM_SIZE]; /* Array of pkts for glomming */ + uint32 txglom_cnt; /* Number of pkts in the glom array */ + uint32 txglom_total_len; /* Total length of pkts in glom array */ + bool txglom_enable; /* Flag to indicate whether tx glom is enabled/disabled */ + uint32 txglomsize; /* Glom size limitation */ + void *pad_pkt; +#if defined(CUSTOMER_IMX) + int bus_wake_on_resume; +#endif /* CUSTOMER_IMX */ +} dhd_bus_t; + +/* clkstate */ +#define CLK_NONE 0 +#define CLK_SDONLY 1 +#define CLK_PENDING 2 /* Not used yet */ +#define CLK_AVAIL 3 + +#define DHD_NOPMU(dhd) (FALSE) + +#ifdef DHD_DEBUG +static int qcount[NUMPRIO]; +static int tx_packets[NUMPRIO]; +#endif /* DHD_DEBUG */ + +/* Deferred transmit */ +const uint dhd_deferred_tx = 1; + +extern uint dhd_watchdog_ms; + +extern void dhd_os_wd_timer(void *bus, uint wdtick); + +/* Tx/Rx bounds */ +uint dhd_txbound; +uint dhd_rxbound; +uint dhd_txminmax = DHD_TXMINMAX; + +/* override the RAM size if possible */ +#define DONGLE_MIN_RAMSIZE (128 *1024) +int dhd_dongle_ramsize; + +uint dhd_doflow = TRUE; +uint dhd_dpcpoll = FALSE; + +module_param(dhd_doflow, uint, 0644); +module_param(dhd_dpcpoll, uint, 0644); + +static bool dhd_alignctl; + +static bool sd1idle; + +static bool retrydata; +#define RETRYCHAN(chan) (((chan) == SDPCM_EVENT_CHANNEL) || retrydata) + +static uint watermark = 8; +static uint mesbusyctrl = 0; +static const uint firstread = DHD_FIRSTREAD; + +/* Retry count for register access failures */ +static const uint retry_limit = 2; + +/* Force even SD lengths (some host controllers mess up on odd bytes) */ +static bool forcealign; + +#define ALIGNMENT 4 + +#if defined(OOB_INTR_ONLY) && defined(HW_OOB) +extern void bcmsdh_enable_hw_oob_intr(void *sdh, bool enable); +#endif + +#if defined(OOB_INTR_ONLY) && defined(SDIO_ISR_THREAD) +#error OOB_INTR_ONLY is NOT working with SDIO_ISR_THREAD +#endif /* defined(OOB_INTR_ONLY) && defined(SDIO_ISR_THREAD) */ +#define PKTALIGN(osh, p, len, align) \ + do { \ + uintptr datalign; \ + datalign = (uintptr)PKTDATA((osh), (p)); \ + datalign = ROUNDUP(datalign, (align)) - datalign; \ + ASSERT(datalign < (align)); \ + ASSERT(PKTLEN((osh), (p)) >= ((len) + datalign)); \ + if (datalign) \ + PKTPULL((osh), (p), (uint)datalign); \ + PKTSETLEN((osh), (p), (len)); \ + } while (0) + +/* Limit on rounding up frames */ +static const uint max_roundup = 512; + +/* Try doing readahead */ +static bool dhd_readahead; + +/* To check if there's window offered */ +#define DATAOK(bus) \ + (((uint8)(bus->tx_max - bus->tx_seq) > 1) && \ + (((uint8)(bus->tx_max - bus->tx_seq) & 0x80) == 0)) + +/* To check if there's window offered for ctrl frame */ +#define TXCTLOK(bus) \ + (((uint8)(bus->tx_max - bus->tx_seq) != 0) && \ + (((uint8)(bus->tx_max - bus->tx_seq) & 0x80) == 0)) + +/* Number of pkts available in dongle for data RX */ +#define DATABUFCNT(bus) \ + ((uint8)(bus->tx_max - bus->tx_seq) - 1) + +/* Macros to get register read/write status */ +/* NOTE: these assume a local dhdsdio_bus_t *bus! */ +#define R_SDREG(regvar, regaddr, retryvar) \ +do { \ + retryvar = 0; \ + do { \ + regvar = R_REG(bus->dhd->osh, regaddr); \ + } while (bcmsdh_regfail(bus->sdh) && (++retryvar <= retry_limit)); \ + if (retryvar) { \ + bus->regfails += (retryvar-1); \ + if (retryvar > retry_limit) { \ + DHD_ERROR(("%s: FAILED" #regvar "READ, LINE %d\n", \ + __FUNCTION__, __LINE__)); \ + regvar = 0; \ + } \ + } \ +} while (0) + +#define W_SDREG(regval, regaddr, retryvar) \ +do { \ + retryvar = 0; \ + do { \ + W_REG(bus->dhd->osh, regaddr, regval); \ + } while (bcmsdh_regfail(bus->sdh) && (++retryvar <= retry_limit)); \ + if (retryvar) { \ + bus->regfails += (retryvar-1); \ + if (retryvar > retry_limit) \ + DHD_ERROR(("%s: FAILED REGISTER WRITE, LINE %d\n", \ + __FUNCTION__, __LINE__)); \ + } \ +} while (0) + +#define BUS_WAKE(bus) \ + do { \ + bus->idlecount = 0; \ + if ((bus)->sleeping) \ + dhdsdio_bussleep((bus), FALSE); \ + } while (0); + +/* + * pktavail interrupts from dongle to host can be managed in 3 different ways + * whenever there is a packet available in dongle to transmit to host. + * + * Mode 0: Dongle writes the software host mailbox and host is interrupted. + * Mode 1: (sdiod core rev >= 4) + * Device sets a new bit in the intstatus whenever there is a packet + * available in fifo. Host can't clear this specific status bit until all the + * packets are read from the FIFO. No need to ack dongle intstatus. + * Mode 2: (sdiod core rev >= 4) + * Device sets a bit in the intstatus, and host acks this by writing + * one to this bit. Dongle won't generate anymore packet interrupts + * until host reads all the packets from the dongle and reads a zero to + * figure that there are no more packets. No need to disable host ints. + * Need to ack the intstatus. + */ + +#define SDIO_DEVICE_HMB_RXINT 0 /* default old way */ +#define SDIO_DEVICE_RXDATAINT_MODE_0 1 /* from sdiod rev 4 */ +#define SDIO_DEVICE_RXDATAINT_MODE_1 2 /* from sdiod rev 4 */ + + +#define FRAME_AVAIL_MASK(bus) \ + ((bus->rxint_mode == SDIO_DEVICE_HMB_RXINT) ? I_HMB_FRAME_IND : I_XMTDATA_AVAIL) + +#define DHD_BUS SDIO_BUS + +#define PKT_AVAILABLE(bus, intstatus) ((intstatus) & (FRAME_AVAIL_MASK(bus))) + +#define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE) + +#define GSPI_PR55150_BAILOUT + +#ifdef SDTEST +static void dhdsdio_testrcv(dhd_bus_t *bus, void *pkt, uint seq); +static void dhdsdio_sdtest_set(dhd_bus_t *bus, uint count); +#endif + +#ifdef DHD_DEBUG +static int dhdsdio_checkdied(dhd_bus_t *bus, char *data, uint size); +static int dhd_serialconsole(dhd_bus_t *bus, bool get, bool enable, int *bcmerror); +#endif /* DHD_DEBUG */ + +static int dhdsdio_devcap_set(dhd_bus_t *bus, uint8 cap); +static int dhdsdio_download_state(dhd_bus_t *bus, bool enter); + +static void dhdsdio_release(dhd_bus_t *bus, osl_t *osh); +static void dhdsdio_release_malloc(dhd_bus_t *bus, osl_t *osh); +static void dhdsdio_disconnect(void *ptr); +static bool dhdsdio_chipmatch(uint16 chipid); +static bool dhdsdio_probe_attach(dhd_bus_t *bus, osl_t *osh, void *sdh, + void * regsva, uint16 devid); +static bool dhdsdio_probe_malloc(dhd_bus_t *bus, osl_t *osh, void *sdh); +static bool dhdsdio_probe_init(dhd_bus_t *bus, osl_t *osh, void *sdh); +static void dhdsdio_release_dongle(dhd_bus_t *bus, osl_t *osh, bool dongle_isolation, + bool reset_flag); + +static void dhd_dongle_setramsize(struct dhd_bus *bus, int mem_size); +static int dhd_bcmsdh_recv_buf(dhd_bus_t *bus, uint32 addr, uint fn, uint flags, + uint8 *buf, uint nbytes, + void *pkt, bcmsdh_cmplt_fn_t complete, void *handle); +static int dhd_bcmsdh_send_buf(dhd_bus_t *bus, uint32 addr, uint fn, uint flags, + uint8 *buf, uint nbytes, + void *pkt, bcmsdh_cmplt_fn_t complete, void *handle, int max_retry); +static int dhdsdio_txpkt(dhd_bus_t *bus, uint chan, void** pkts, int num_pkt, bool free_pkt); +static int dhdsdio_txpkt_preprocess(dhd_bus_t *bus, void *pkt, int chan, int txseq, + int prev_chain_total_len, bool last_chained_pkt, + int *pad_pkt_len, void **new_pkt); +static int dhdsdio_txpkt_postprocess(dhd_bus_t *bus, void *pkt); + +static int dhdsdio_download_firmware(dhd_bus_t *bus, osl_t *osh, void *sdh); +static int _dhdsdio_download_firmware(dhd_bus_t *bus); + +static int dhdsdio_download_code_file(dhd_bus_t *bus, char *image_path); +static int dhdsdio_download_nvram(dhd_bus_t *bus); +#ifdef BCMEMBEDIMAGE +static int dhdsdio_download_code_array(dhd_bus_t *bus); +#endif +static int dhdsdio_bussleep(dhd_bus_t *bus, bool sleep); +static int dhdsdio_clkctl(dhd_bus_t *bus, uint target, bool pendok); +static uint8 dhdsdio_sleepcsr_get(dhd_bus_t *bus); + +#ifdef WLMEDIA_HTSF +#include <htsf.h> +extern uint32 dhd_get_htsf(void *dhd, int ifidx); +#endif /* WLMEDIA_HTSF */ + +static void +dhdsdio_tune_fifoparam(struct dhd_bus *bus) +{ + int err; + uint8 devctl, wm, mes; + + if (bus->sih->buscorerev >= 15) { + /* See .ppt in PR for these recommended values */ + if (bus->blocksize == 512) { + wm = OVERFLOW_BLKSZ512_WM; + mes = OVERFLOW_BLKSZ512_MES; + } else { + mes = bus->blocksize/4; + wm = bus->blocksize/4; + } + + watermark = wm; + mesbusyctrl = mes; + } else { + DHD_INFO(("skip fifotune: SdioRev(%d) is lower than minimal requested ver\n", + bus->sih->buscorerev)); + return; + } + + /* Update watermark */ + if (wm > 0) { + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_WATERMARK, wm, &err); + + devctl = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, &err); + devctl |= SBSDIO_DEVCTL_F2WM_ENAB; + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, devctl, &err); + } + + /* Update MES */ + if (mes > 0) { + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_MESBUSYCTRL, + (mes | SBSDIO_MESBUSYCTRL_ENAB), &err); + } + + DHD_INFO(("Apply overflow WAR: 0x%02x 0x%02x 0x%02x\n", + bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, &err), + bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_WATERMARK, &err), + bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_MESBUSYCTRL, &err))); +} + +static void +dhd_dongle_setramsize(struct dhd_bus *bus, int mem_size) +{ + int32 min_size = DONGLE_MIN_RAMSIZE; + /* Restrict the ramsize to user specified limit */ + DHD_ERROR(("user: Restrict the dongle ram size to %d, min accepted %d\n", + dhd_dongle_ramsize, min_size)); + if ((dhd_dongle_ramsize > min_size) && + (dhd_dongle_ramsize < (int32)bus->orig_ramsize)) + bus->ramsize = dhd_dongle_ramsize; +} + +static int +dhdsdio_set_siaddr_window(dhd_bus_t *bus, uint32 address) +{ + int err = 0; + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW, + (address >> 8) & SBSDIO_SBADDRLOW_MASK, &err); + if (!err) + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRMID, + (address >> 16) & SBSDIO_SBADDRMID_MASK, &err); + if (!err) + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRHIGH, + (address >> 24) & SBSDIO_SBADDRHIGH_MASK, &err); + return err; +} + + +#ifdef USE_OOB_GPIO1 +static int +dhdsdio_oobwakeup_init(dhd_bus_t *bus) +{ + uint32 val, addr, data; + + bcmsdh_gpioouten(bus->sdh, GPIO_DEV_WAKEUP); + + addr = SI_ENUM_BASE + OFFSETOF(chipcregs_t, chipcontrol_addr); + data = SI_ENUM_BASE + OFFSETOF(chipcregs_t, chipcontrol_data); + + /* Set device for gpio1 wakeup */ + bcmsdh_reg_write(bus->sdh, addr, 4, 2); + val = bcmsdh_reg_read(bus->sdh, data, 4); + val |= CC_CHIPCTRL2_GPIO1_WAKEUP; + bcmsdh_reg_write(bus->sdh, data, 4, val); + + bus->_oobwakeup = TRUE; + + return 0; +} +#endif /* USE_OOB_GPIO1 */ + +/* + * Query if FW is in SR mode + */ +static bool +dhdsdio_sr_cap(dhd_bus_t *bus) +{ + bool cap = FALSE; + uint32 core_capext, addr, data; + + + if (bus->sih->chip == BCM43430_CHIP_ID) { + /* check if fw initialized sr engine */ + addr = SI_ENUM_BASE + OFFSETOF(chipcregs_t, sr_control1); + if (bcmsdh_reg_read(bus->sdh, addr, 4) != 0) + cap = TRUE; + + return cap; + } + + if (bus->sih->chip == BCM4324_CHIP_ID) { + addr = SI_ENUM_BASE + OFFSETOF(chipcregs_t, chipcontrol_addr); + data = SI_ENUM_BASE + OFFSETOF(chipcregs_t, chipcontrol_data); + bcmsdh_reg_write(bus->sdh, addr, 4, 3); + core_capext = bcmsdh_reg_read(bus->sdh, data, 4); + } else if (bus->sih->chip == BCM4330_CHIP_ID) { + core_capext = FALSE; + } else if ((bus->sih->chip == BCM4335_CHIP_ID) || + (bus->sih->chip == BCM4339_CHIP_ID) || + (bus->sih->chip == BCM43349_CHIP_ID) || + (bus->sih->chip == BCM4345_CHIP_ID) || + (bus->sih->chip == BCM4354_CHIP_ID) || + (bus->sih->chip == BCM4356_CHIP_ID) || + (bus->sih->chip == BCM4350_CHIP_ID)) { + core_capext = TRUE; + } else { + core_capext = bcmsdh_reg_read(bus->sdh, CORE_CAPEXT_ADDR, 4); + core_capext = (core_capext & CORE_CAPEXT_SR_SUPPORTED_MASK); + } + if (!(core_capext)) + return FALSE; + + if (bus->sih->chip == BCM4324_CHIP_ID) { + /* FIX: Should change to query SR control register instead */ + cap = TRUE; + } else if ((bus->sih->chip == BCM4335_CHIP_ID) || + (bus->sih->chip == BCM4339_CHIP_ID) || + (bus->sih->chip == BCM43349_CHIP_ID) || + (bus->sih->chip == BCM4345_CHIP_ID) || + (bus->sih->chip == BCM4354_CHIP_ID) || + (bus->sih->chip == BCM4356_CHIP_ID) || + (bus->sih->chip == BCM4350_CHIP_ID)) { + uint32 enabval = 0; + addr = SI_ENUM_BASE + OFFSETOF(chipcregs_t, chipcontrol_addr); + data = SI_ENUM_BASE + OFFSETOF(chipcregs_t, chipcontrol_data); + bcmsdh_reg_write(bus->sdh, addr, 4, CC_PMUCC3); + enabval = bcmsdh_reg_read(bus->sdh, data, 4); + + if ((bus->sih->chip == BCM4350_CHIP_ID) || + (bus->sih->chip == BCM4345_CHIP_ID) || + (bus->sih->chip == BCM4356_CHIP_ID) || + (bus->sih->chip == BCM4354_CHIP_ID)) + enabval &= CC_CHIPCTRL3_SR_ENG_ENABLE; + + if (enabval) + cap = TRUE; + } else { + data = bcmsdh_reg_read(bus->sdh, + SI_ENUM_BASE + OFFSETOF(chipcregs_t, retention_ctl), 4); + if ((data & (RCTL_MACPHY_DISABLE_MASK | RCTL_LOGIC_DISABLE_MASK)) == 0) + cap = TRUE; + } + + return cap; +} + +static int +dhdsdio_srwar_init(dhd_bus_t *bus) +{ + bcmsdh_gpio_init(bus->sdh); + +#ifdef USE_OOB_GPIO1 + dhdsdio_oobwakeup_init(bus); +#endif + + + return 0; +} + +static int +dhdsdio_sr_init(dhd_bus_t *bus) +{ + uint8 val; + int err = 0; + + if ((bus->sih->chip == BCM4334_CHIP_ID) && (bus->sih->chiprev == 2)) + dhdsdio_srwar_init(bus); + + val = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_WAKEUPCTRL, NULL); + val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT; + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_WAKEUPCTRL, + 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT, &err); + val = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_WAKEUPCTRL, NULL); + +#ifdef USE_CMD14 + /* Add CMD14 Support */ + dhdsdio_devcap_set(bus, + (SDIOD_CCCR_BRCM_CARDCAP_CMD14_SUPPORT | SDIOD_CCCR_BRCM_CARDCAP_CMD14_EXT)); +#endif /* USE_CMD14 */ + + dhdsdio_devcap_set(bus, SDIOD_CCCR_BRCM_CARDCAP_CMD_NODEC); + + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, + SBSDIO_FUNC1_CHIPCLKCSR, SBSDIO_FORCE_HT, &err); + + bus->_slpauto = dhd_slpauto ? TRUE : FALSE; + + bus->_srenab = TRUE; + + return 0; +} + +/* + * FIX: Be sure KSO bit is enabled + * Currently, it's defaulting to 0 which should be 1. + */ +static int +dhdsdio_clk_kso_init(dhd_bus_t *bus) +{ + uint8 val; + int err = 0; + + /* set flag */ + bus->kso = TRUE; + + /* + * Enable KeepSdioOn (KSO) bit for normal operation + * Default is 0 (4334A0) so set it. Fixed in B0. + */ + val = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SLEEPCSR, NULL); + if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) { + val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SLEEPCSR, val, &err); + if (err) + DHD_ERROR(("%s: SBSDIO_FUNC1_SLEEPCSR err: 0x%x\n", __FUNCTION__, err)); + } + + return 0; +} + +#define KSO_DBG(x) +#define KSO_WAIT_US 50 +#define KSO_WAIT_MS 1 +#define KSO_SLEEP_RETRY_COUNT 20 +#define ERROR_BCME_NODEVICE_MAX 1 + +#define MAX_KSO_ATTEMPTS (PMU_MAX_TRANSITION_DLY/KSO_WAIT_US) +static int +dhdsdio_clk_kso_enab(dhd_bus_t *bus, bool on) +{ + uint8 wr_val = 0, rd_val, cmp_val, bmask; + int err = 0; + int try_cnt = 0; + + KSO_DBG(("%s> op:%s\n", __FUNCTION__, (on ? "KSO_SET" : "KSO_CLR"))); + + wr_val |= (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); + + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err); + + if (on) { + cmp_val = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK | SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK; + bmask = cmp_val; + + OSL_SLEEP(3); + } else { + /* Put device to sleep, turn off KSO */ + cmp_val = 0; + bmask = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK; + } + + do { + rd_val = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SLEEPCSR, &err); + if (((rd_val & bmask) == cmp_val) && !err) + break; + + KSO_DBG(("%s> KSO wr/rd retry:%d, ERR:%x \n", __FUNCTION__, try_cnt, err)); + + if (((try_cnt + 1) % KSO_SLEEP_RETRY_COUNT) == 0) { + OSL_SLEEP(KSO_WAIT_MS); + } else + OSL_DELAY(KSO_WAIT_US); + + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err); + } while (try_cnt++ < MAX_KSO_ATTEMPTS); + + + if (try_cnt > 2) + KSO_DBG(("%s> op:%s, try_cnt:%d, rd_val:%x, ERR:%x \n", + __FUNCTION__, (on ? "KSO_SET" : "KSO_CLR"), try_cnt, rd_val, err)); + + if (try_cnt > MAX_KSO_ATTEMPTS) { + DHD_ERROR(("%s> op:%s, ERROR: try_cnt:%d, rd_val:%x, ERR:%x \n", + __FUNCTION__, (on ? "KSO_SET" : "KSO_CLR"), try_cnt, rd_val, err)); + } + return err; +} + +static int +dhdsdio_clk_kso_iovar(dhd_bus_t *bus, bool on) +{ + int err = 0; + + if (on == FALSE) { + + BUS_WAKE(bus); + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + + DHD_ERROR(("%s: KSO disable clk: 0x%x\n", __FUNCTION__, + bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, + SBSDIO_FUNC1_CHIPCLKCSR, &err))); + dhdsdio_clk_kso_enab(bus, FALSE); + } else { + DHD_ERROR(("%s: KSO enable\n", __FUNCTION__)); + + /* Make sure we have SD bus access */ + if (bus->clkstate == CLK_NONE) { + DHD_ERROR(("%s: Request SD clk\n", __FUNCTION__)); + dhdsdio_clkctl(bus, CLK_SDONLY, FALSE); + } + + dhdsdio_clk_kso_enab(bus, TRUE); + + DHD_ERROR(("%s: sleepcsr: 0x%x\n", __FUNCTION__, + dhdsdio_sleepcsr_get(bus))); + } + + bus->kso = on; + BCM_REFERENCE(err); + + return 0; +} + +static uint8 +dhdsdio_sleepcsr_get(dhd_bus_t *bus) +{ + int err = 0; + uint8 val = 0; + + val = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SLEEPCSR, &err); + if (err) + DHD_TRACE(("Failed to read SLEEPCSR: %d\n", err)); + + return val; +} + +uint8 +dhdsdio_devcap_get(dhd_bus_t *bus) +{ + return bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_BRCM_CARDCAP, NULL); +} + +static int +dhdsdio_devcap_set(dhd_bus_t *bus, uint8 cap) +{ + int err = 0; + + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_BRCM_CARDCAP, cap, &err); + if (err) + DHD_ERROR(("%s: devcap set err: 0x%x\n", __FUNCTION__, err)); + + return 0; +} + +static int +dhdsdio_clk_devsleep_iovar(dhd_bus_t *bus, bool on) +{ + int err = 0, retry; + uint8 val; + + retry = 0; + if (on == TRUE) { + /* Enter Sleep */ + + /* Be sure we request clk before going to sleep + * so we can wake-up with clk request already set + * else device can go back to sleep immediately + */ + if (!SLPAUTO_ENAB(bus)) + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + else { + val = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, &err); + if ((val & SBSDIO_CSR_MASK) == 0) { + DHD_ERROR(("%s: No clock before enter sleep:0x%x\n", + __FUNCTION__, val)); + + /* Reset clock request */ + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, + SBSDIO_ALP_AVAIL_REQ, &err); + DHD_ERROR(("%s: clock before sleep:0x%x\n", __FUNCTION__, + bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, + SBSDIO_FUNC1_CHIPCLKCSR, &err))); + } + } + + DHD_TRACE(("%s: clk before sleep: 0x%x\n", __FUNCTION__, + bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, + SBSDIO_FUNC1_CHIPCLKCSR, &err))); +#ifdef USE_CMD14 + err = bcmsdh_sleep(bus->sdh, TRUE); +#else + err = dhdsdio_clk_kso_enab(bus, FALSE); + if (OOB_WAKEUP_ENAB(bus)) + { + err = bcmsdh_gpioout(bus->sdh, GPIO_DEV_WAKEUP, FALSE); /* GPIO_1 is off */ + } +#endif /* USE_CMD14 */ + } else { + /* Exit Sleep */ + /* Make sure we have SD bus access */ + if (bus->clkstate == CLK_NONE) { + DHD_TRACE(("%s: Request SD clk\n", __FUNCTION__)); + dhdsdio_clkctl(bus, CLK_SDONLY, FALSE); + } + + if ((bus->sih->chip == BCM4334_CHIP_ID) && (bus->sih->chiprev == 2)) { + SPINWAIT_SLEEP(sdioh_spinwait_sleep, + (bcmsdh_gpioin(bus->sdh, GPIO_DEV_SRSTATE) != TRUE), + GPIO_DEV_SRSTATE_TIMEOUT); + + if (bcmsdh_gpioin(bus->sdh, GPIO_DEV_SRSTATE) == FALSE) { + DHD_ERROR(("ERROR: GPIO_DEV_SRSTATE still low!\n")); + } + } +#ifdef USE_CMD14 + err = bcmsdh_sleep(bus->sdh, FALSE); + if (SLPAUTO_ENAB(bus) && (err != 0)) { + OSL_DELAY(10000); + DHD_TRACE(("%s: Resync device sleep\n", __FUNCTION__)); + + /* Toggle sleep to resync with host and device */ + err = bcmsdh_sleep(bus->sdh, TRUE); + OSL_DELAY(10000); + err = bcmsdh_sleep(bus->sdh, FALSE); + + if (err) { + OSL_DELAY(10000); + DHD_ERROR(("%s: CMD14 exit failed again!\n", __FUNCTION__)); + + /* Toggle sleep to resync with host and device */ + err = bcmsdh_sleep(bus->sdh, TRUE); + OSL_DELAY(10000); + err = bcmsdh_sleep(bus->sdh, FALSE); + if (err) { + DHD_ERROR(("%s: CMD14 exit failed twice!\n", __FUNCTION__)); + DHD_ERROR(("%s: FATAL: Device non-response!\n", + __FUNCTION__)); + err = 0; + } + } + } +#else + if (OOB_WAKEUP_ENAB(bus)) + { + err = bcmsdh_gpioout(bus->sdh, GPIO_DEV_WAKEUP, TRUE); /* GPIO_1 is on */ + } + do { + err = dhdsdio_clk_kso_enab(bus, TRUE); + if (err) + OSL_SLEEP(10); + } while ((err != 0) && (++retry < 3)); + + if (err != 0) { + DHD_ERROR(("ERROR: kso set failed retry: %d\n", retry)); + err = 0; /* continue anyway */ + } +#endif /* !USE_CMD14 */ + + if (err == 0) { + uint8 csr; + + /* Wait for device ready during transition to wake-up */ + SPINWAIT_SLEEP(sdioh_spinwait_sleep, + (((csr = dhdsdio_sleepcsr_get(bus)) & + SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK) != + (SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK)), (20000)); + + DHD_TRACE(("%s: ExitSleep sleepcsr: 0x%x\n", __FUNCTION__, csr)); + + if (!(csr & SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK)) { + DHD_ERROR(("%s:ERROR: ExitSleep device NOT Ready! 0x%x\n", + __FUNCTION__, csr)); + err = BCME_NODEVICE; + } + + SPINWAIT_SLEEP(sdioh_spinwait_sleep, + (((csr = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, + SBSDIO_FUNC1_CHIPCLKCSR, &err)) & SBSDIO_HT_AVAIL) != + (SBSDIO_HT_AVAIL)), (10000)); + + DHD_TRACE(("%s: SBSDIO_FUNC1_CHIPCLKCSR : 0x%x\n", __FUNCTION__, csr)); + if (!err && ((csr & SBSDIO_HT_AVAIL) != SBSDIO_HT_AVAIL)) { + DHD_ERROR(("%s:ERROR: device NOT Ready! 0x%x\n", + __FUNCTION__, csr)); + err = BCME_NODEVICE; + } + } + } + + /* Update if successful */ + if (err == 0) + bus->kso = on ? FALSE : TRUE; + else { + DHD_ERROR(("%s: Sleep request failed: kso:%d on:%d err:%d\n", + __FUNCTION__, bus->kso, on, err)); + if (!on && retry > 2) + bus->kso = FALSE; + } + + return err; +} + +/* Turn backplane clock on or off */ +static int +dhdsdio_htclk(dhd_bus_t *bus, bool on, bool pendok) +{ +#define HT_AVAIL_ERROR_MAX 10 + static int ht_avail_error = 0; + int err; + uint8 clkctl, clkreq, devctl; + bcmsdh_info_t *sdh; + uint32 delay = PMU_MAX_TRANSITION_DLY; + +#ifdef MURATA_WORKAROUND_FOR_HTAVAIL + int try_count, try_err; +#endif /* MURATA_WORKAROUND_FOR_HTAVAIL */ + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + clkctl = 0; + sdh = bus->sdh; + + + if (!KSO_ENAB(bus)) + return BCME_OK; + + if (SLPAUTO_ENAB(bus)) { + bus->clkstate = (on ? CLK_AVAIL : CLK_SDONLY); + return BCME_OK; + } + + if (on) { + /* Request HT Avail */ + clkreq = bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ; + + + + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err); + if (err) { + ht_avail_error++; + if (ht_avail_error < HT_AVAIL_ERROR_MAX) { + DHD_ERROR(("%s: HT Avail request error: %d\n", __FUNCTION__, err)); + } + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27) + else if (ht_avail_error == HT_AVAIL_ERROR_MAX) { + dhd_os_send_hang_message(bus->dhd); + } +#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27) */ + return BCME_ERROR; + } else { + ht_avail_error = 0; + } + + + /* Check current status */ + clkctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, &err); + if (err) { + DHD_ERROR(("%s: HT Avail read error: %d\n", __FUNCTION__, err)); + return BCME_ERROR; + } + +#if !defined(OOB_INTR_ONLY) || defined(OOB_PARAM) + /* Go to pending and await interrupt if appropriate */ + if (1 && +#if defined(OOB_PARAM) + bus->dhd->oob_disable && +#endif /* OOB_PARAM */ + !SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) { + /* Allow only clock-available interrupt */ + devctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, &err); + if (err) { + DHD_ERROR(("%s: Devctl access error setting CA: %d\n", + __FUNCTION__, err)); + return BCME_ERROR; + } + + devctl |= SBSDIO_DEVCTL_CA_INT_ONLY; + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, devctl, &err); + DHD_INFO(("CLKCTL: set PENDING\n")); + bus->clkstate = CLK_PENDING; + return BCME_OK; + } else +#endif /* !defined(OOB_INTR_ONLY) || defined(OOB_PARAM) */ + { + if (bus->clkstate == CLK_PENDING) { + /* Cancel CA-only interrupt filter */ + devctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, &err); + devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, devctl, &err); + } + } + + /* Give the 43362 chip a little bit extra time for HT Avail */ + if (bus->sih->chip == BCM43362_CHIP_ID) { + delay += PMU_TRANSITION_DLY_EXTRA; + } + +#ifdef MURATA_WORKAROUND_FOR_HTAVAIL + /* loop 20 times to test condition */ + for (try_count = 0; try_count < 20; try_count++) { + try_err = 0; +#endif /* MURATA_WORKAROUND_FOR_HTAVAIL */ + /* Otherwise, wait here (polling) for HT Avail */ + if (!SBSDIO_CLKAV(clkctl, bus->alp_only)) { + SPINWAIT_SLEEP(sdioh_spinwait_sleep, + ((clkctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, + SBSDIO_FUNC1_CHIPCLKCSR, &err)), + !SBSDIO_CLKAV(clkctl, bus->alp_only)), + delay); + } + if (err) { + DHD_ERROR(("%s: HT Avail request error: %d\n", __FUNCTION__, err)); +#ifdef MURATA_WORKAROUND_FOR_HTAVAIL + try_err = 1; +#else + return BCME_ERROR; +#endif /* MURATA_WORKAROUND_FOR_HTAVAIL */ + } + if (!SBSDIO_CLKAV(clkctl, bus->alp_only)) { + DHD_ERROR(("%s: HT Avail timeout (%d): clkctl 0x%02x\n", + __FUNCTION__, PMU_MAX_TRANSITION_DLY, clkctl)); +#ifdef MURATA_WORKAROUND_FOR_HTAVAIL + try_err = 1; +#else + return BCME_ERROR; +#endif /* MURATA_WORKAROUND_FOR_HTAVAIL */ + } + +#ifdef MURATA_WORKAROUND_FOR_HTAVAIL + if (try_err == 0) + break; + } /* for (try_count = 0; try_count < 20; try_count++) */ + if (try_err == 1) { + DHD_ERROR(("%s: HT Avail request error: retried %d times. UNRECOVERABLE!\n", __FUNCTION__, try_count)); + return BCME_ERROR; + } + if (try_count > 0) + DHD_ERROR(("%s: HT Avail request NO ERROR: retried %d times.\n", __FUNCTION__, try_count)); +#endif /* MURATA_WORKAROUND_FOR_HTAVAIL */ + + /* Mark clock available */ + bus->clkstate = CLK_AVAIL; + DHD_INFO(("CLKCTL: turned ON\n")); + +#if defined(DHD_DEBUG) + if (bus->alp_only == TRUE) { +#if !defined(BCMLXSDMMC) + if (!SBSDIO_ALPONLY(clkctl)) { + DHD_ERROR(("%s: HT Clock, when ALP Only\n", __FUNCTION__)); + } +#endif /* !defined(BCMLXSDMMC) */ + } else { + if (SBSDIO_ALPONLY(clkctl)) { + DHD_ERROR(("%s: HT Clock should be on.\n", __FUNCTION__)); + } + } +#endif /* defined (DHD_DEBUG) */ + + bus->activity = TRUE; +#ifdef DHD_USE_IDLECOUNT + bus->idlecount = 0; +#endif /* DHD_USE_IDLECOUNT */ + } else { + clkreq = 0; + + if (bus->clkstate == CLK_PENDING) { + /* Cancel CA-only interrupt filter */ + devctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, &err); + devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, devctl, &err); + } + + bus->clkstate = CLK_SDONLY; + if (!SR_ENAB(bus)) { + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err); + DHD_INFO(("CLKCTL: turned OFF\n")); + if (err) { + DHD_ERROR(("%s: Failed access turning clock off: %d\n", + __FUNCTION__, err)); + return BCME_ERROR; + } + } + } + return BCME_OK; +} + +/* Change idle/active SD state */ +static int +dhdsdio_sdclk(dhd_bus_t *bus, bool on) +{ + int err; + int32 iovalue; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + if (on) { + if (bus->idleclock == DHD_IDLE_STOP) { + /* Turn on clock and restore mode */ + iovalue = 1; + err = bcmsdh_iovar_op(bus->sdh, "sd_clock", NULL, 0, + &iovalue, sizeof(iovalue), TRUE); + if (err) { + DHD_ERROR(("%s: error enabling sd_clock: %d\n", + __FUNCTION__, err)); + return BCME_ERROR; + } + + iovalue = bus->sd_mode; + err = bcmsdh_iovar_op(bus->sdh, "sd_mode", NULL, 0, + &iovalue, sizeof(iovalue), TRUE); + if (err) { + DHD_ERROR(("%s: error changing sd_mode: %d\n", + __FUNCTION__, err)); + return BCME_ERROR; + } + } else if (bus->idleclock != DHD_IDLE_ACTIVE) { + /* Restore clock speed */ + iovalue = bus->sd_divisor; + err = bcmsdh_iovar_op(bus->sdh, "sd_divisor", NULL, 0, + &iovalue, sizeof(iovalue), TRUE); + if (err) { + DHD_ERROR(("%s: error restoring sd_divisor: %d\n", + __FUNCTION__, err)); + return BCME_ERROR; + } + } + bus->clkstate = CLK_SDONLY; + } else { + /* Stop or slow the SD clock itself */ + if ((bus->sd_divisor == -1) || (bus->sd_mode == -1)) { + DHD_TRACE(("%s: can't idle clock, divisor %d mode %d\n", + __FUNCTION__, bus->sd_divisor, bus->sd_mode)); + return BCME_ERROR; + } + if (bus->idleclock == DHD_IDLE_STOP) { + if (sd1idle) { + /* Change to SD1 mode and turn off clock */ + iovalue = 1; + err = bcmsdh_iovar_op(bus->sdh, "sd_mode", NULL, 0, + &iovalue, sizeof(iovalue), TRUE); + if (err) { + DHD_ERROR(("%s: error changing sd_clock: %d\n", + __FUNCTION__, err)); + return BCME_ERROR; + } + } + + iovalue = 0; + err = bcmsdh_iovar_op(bus->sdh, "sd_clock", NULL, 0, + &iovalue, sizeof(iovalue), TRUE); + if (err) { + DHD_ERROR(("%s: error disabling sd_clock: %d\n", + __FUNCTION__, err)); + return BCME_ERROR; + } + } else if (bus->idleclock != DHD_IDLE_ACTIVE) { + /* Set divisor to idle value */ + iovalue = bus->idleclock; + err = bcmsdh_iovar_op(bus->sdh, "sd_divisor", NULL, 0, + &iovalue, sizeof(iovalue), TRUE); + if (err) { + DHD_ERROR(("%s: error changing sd_divisor: %d\n", + __FUNCTION__, err)); + return BCME_ERROR; + } + } + bus->clkstate = CLK_NONE; + } + + return BCME_OK; +} + +/* Transition SD and backplane clock readiness */ +static int +dhdsdio_clkctl(dhd_bus_t *bus, uint target, bool pendok) +{ + int ret = BCME_OK; +#ifdef DHD_DEBUG + uint oldstate = bus->clkstate; +#endif /* DHD_DEBUG */ + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + /* Early exit if we're already there */ + if (bus->clkstate == target) { + if (target == CLK_AVAIL) { + dhd_os_wd_timer(bus->dhd, dhd_watchdog_ms); + bus->activity = TRUE; +#ifdef DHD_USE_IDLECOUNT + bus->idlecount = 0; +#endif /* DHD_USE_IDLECOUNT */ + } + return ret; + } + + switch (target) { + case CLK_AVAIL: + /* Make sure SD clock is available */ + if (bus->clkstate == CLK_NONE) + dhdsdio_sdclk(bus, TRUE); + /* Now request HT Avail on the backplane */ + ret = dhdsdio_htclk(bus, TRUE, pendok); + if (ret == BCME_OK) { + dhd_os_wd_timer(bus->dhd, dhd_watchdog_ms); + bus->activity = TRUE; +#ifdef DHD_USE_IDLECOUNT + bus->idlecount = 0; +#endif /* DHD_USE_IDLECOUNT */ + } + break; + + case CLK_SDONLY: + /* Remove HT request, or bring up SD clock */ + if (bus->clkstate == CLK_NONE) + ret = dhdsdio_sdclk(bus, TRUE); + else if (bus->clkstate == CLK_AVAIL) + ret = dhdsdio_htclk(bus, FALSE, FALSE); + else + DHD_ERROR(("dhdsdio_clkctl: request for %d -> %d\n", + bus->clkstate, target)); + if (ret == BCME_OK) { + dhd_os_wd_timer(bus->dhd, dhd_watchdog_ms); + } + break; + + case CLK_NONE: + /* Make sure to remove HT request */ + if (bus->clkstate == CLK_AVAIL) + ret = dhdsdio_htclk(bus, FALSE, FALSE); + /* Now remove the SD clock */ + ret = dhdsdio_sdclk(bus, FALSE); +#ifdef DHD_DEBUG + if (dhd_console_ms == 0) +#endif /* DHD_DEBUG */ + if (bus->poll == 0) + dhd_os_wd_timer(bus->dhd, 0); + break; + } +#ifdef DHD_DEBUG + DHD_INFO(("dhdsdio_clkctl: %d -> %d\n", oldstate, bus->clkstate)); +#endif /* DHD_DEBUG */ + + return ret; +} + +static int +dhdsdio_bussleep(dhd_bus_t *bus, bool sleep) +{ + int err = 0; + bcmsdh_info_t *sdh = bus->sdh; + sdpcmd_regs_t *regs = bus->regs; + uint retries = 0; + + DHD_INFO(("dhdsdio_bussleep: request %s (currently %s)\n", + (sleep ? "SLEEP" : "WAKE"), + (bus->sleeping ? "SLEEP" : "WAKE"))); + + if (bus->dhd->hang_was_sent) + return BCME_ERROR; + + /* Done if we're already in the requested state */ + if (sleep == bus->sleeping) + return BCME_OK; + + /* Going to sleep: set the alarm and turn off the lights... */ + if (sleep) { + /* Don't sleep if something is pending */ + if (bus->dpc_sched || bus->rxskip || pktq_len(&bus->txq)) + return BCME_BUSY; + + + if (!SLPAUTO_ENAB(bus)) { + /* Disable SDIO interrupts (no longer interested) */ + bcmsdh_intr_disable(bus->sdh); + + /* Make sure the controller has the bus up */ + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + + /* Tell device to start using OOB wakeup */ + W_SDREG(SMB_USE_OOB, ®s->tosbmailbox, retries); + if (retries > retry_limit) + DHD_ERROR(("CANNOT SIGNAL CHIP, WILL NOT WAKE UP!!\n")); + + /* Turn off our contribution to the HT clock request */ + dhdsdio_clkctl(bus, CLK_SDONLY, FALSE); + + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, + SBSDIO_FORCE_HW_CLKREQ_OFF, NULL); + + /* Isolate the bus */ + if (bus->sih->chip != BCM4329_CHIP_ID && + bus->sih->chip != BCM4319_CHIP_ID) { + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, + SBSDIO_DEVCTL_PADS_ISO, NULL); + } + } else { + /* Leave interrupts enabled since device can exit sleep and + * interrupt host + */ + err = dhdsdio_clk_devsleep_iovar(bus, TRUE /* sleep */); + } + + /* Change state */ + bus->sleeping = TRUE; +#if defined(SUPPORT_P2P_GO_PS) + wake_up(&bus->bus_sleep); +#endif /* LINUX && (SUPPORT_P2P_GO_PS || !OEM_ANDROID) */ + } else { + /* Waking up: bus power up is ok, set local state */ + + if (!SLPAUTO_ENAB(bus)) { + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, 0, &err); + + /* Force pad isolation off if possible (in case power never toggled) */ + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, 0, NULL); + + + /* Make sure the controller has the bus up */ + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + + /* Send misc interrupt to indicate OOB not needed */ + W_SDREG(0, ®s->tosbmailboxdata, retries); + if (retries <= retry_limit) + W_SDREG(SMB_DEV_INT, ®s->tosbmailbox, retries); + + if (retries > retry_limit) + DHD_ERROR(("CANNOT SIGNAL CHIP TO CLEAR OOB!!\n")); + + /* Make sure we have SD bus access */ + dhdsdio_clkctl(bus, CLK_SDONLY, FALSE); + + /* Enable interrupts again */ + if (bus->intr && (bus->dhd->busstate == DHD_BUS_DATA)) { + bus->intdis = FALSE; + bcmsdh_intr_enable(bus->sdh); + } + } else { + err = dhdsdio_clk_devsleep_iovar(bus, FALSE /* wake */); + } + + if (err == 0) { + /* Change state */ + bus->sleeping = FALSE; + } + } + + return err; +} + + +#if defined(OOB_INTR_ONLY) +void +dhd_enable_oob_intr(struct dhd_bus *bus, bool enable) +{ +#if defined(HW_OOB) + bcmsdh_enable_hw_oob_intr(bus->sdh, enable); +#else + sdpcmd_regs_t *regs = bus->regs; + uint retries = 0; + + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + if (enable == TRUE) { + + /* Tell device to start using OOB wakeup */ + W_SDREG(SMB_USE_OOB, ®s->tosbmailbox, retries); + if (retries > retry_limit) + DHD_ERROR(("CANNOT SIGNAL CHIP, WILL NOT WAKE UP!!\n")); + + } else { + /* Send misc interrupt to indicate OOB not needed */ + W_SDREG(0, ®s->tosbmailboxdata, retries); + if (retries <= retry_limit) + W_SDREG(SMB_DEV_INT, ®s->tosbmailbox, retries); + } + + /* Turn off our contribution to the HT clock request */ + dhdsdio_clkctl(bus, CLK_SDONLY, FALSE); +#endif /* !defined(HW_OOB) */ +} +#endif + +int +dhd_bus_txdata(struct dhd_bus *bus, void *pkt) +{ + int ret = BCME_ERROR; + osl_t *osh; + uint datalen, prec; +#if defined(DHD_TX_DUMP) || defined(DHD_8021X_DUMP) + uint8 *dump_data; + uint16 protocol; +#endif /* DHD_TX_DUMP || DHD_8021X_DUMP */ + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + osh = bus->dhd->osh; + datalen = PKTLEN(osh, pkt); + +#ifdef SDTEST + /* Push the test header if doing loopback */ + if (bus->ext_loop) { + uint8* data; + PKTPUSH(osh, pkt, SDPCM_TEST_HDRLEN); + data = PKTDATA(osh, pkt); + *data++ = SDPCM_TEST_ECHOREQ; + *data++ = (uint8)bus->loopid++; + *data++ = (datalen >> 0); + *data++ = (datalen >> 8); + datalen += SDPCM_TEST_HDRLEN; + } +#else /* SDTEST */ + BCM_REFERENCE(datalen); +#endif /* SDTEST */ + +#if defined(DHD_TX_DUMP) || defined(DHD_8021X_DUMP) + dump_data = PKTDATA(osh, pkt); + dump_data += 4; /* skip 4 bytes header */ + protocol = (dump_data[12] << 8) | dump_data[13]; + + if (protocol == ETHER_TYPE_802_1X) { + DHD_ERROR(("ETHER_TYPE_802_1X [TX]: ver %d, type %d, replay %d\n", + dump_data[14], dump_data[15], dump_data[30])); + } +#endif /* DHD_TX_DUMP || DHD_8021X_DUMP */ + +#if defined(DHD_TX_DUMP) && defined(DHD_TX_FULL_DUMP) + { + int i; + DHD_ERROR(("TX DUMP\n")); + + for (i = 0; i < (datalen - 4); i++) { + DHD_ERROR(("%02X ", dump_data[i])); + if ((i & 15) == 15) + printk("\n"); + } + DHD_ERROR(("\n")); + } +#endif /* DHD_TX_DUMP && DHD_TX_FULL_DUMP */ + + prec = PRIO2PREC((PKTPRIO(pkt) & PRIOMASK)); + + /* Check for existing queue, current flow-control, pending event, or pending clock */ + if (dhd_deferred_tx || bus->fcstate || pktq_len(&bus->txq) || bus->dpc_sched || + (!DATAOK(bus)) || (bus->flowcontrol & NBITVAL(prec)) || + (bus->clkstate != CLK_AVAIL)) { + bool deq_ret; + int pkq_len; + + DHD_TRACE(("%s: deferring pktq len %d\n", __FUNCTION__, pktq_len(&bus->txq))); + bus->fcqueued++; + + /* Priority based enq */ + dhd_os_sdlock_txq(bus->dhd); + deq_ret = dhd_prec_enq(bus->dhd, &bus->txq, pkt, prec); + dhd_os_sdunlock_txq(bus->dhd); + + if (!deq_ret) { +#ifdef PROP_TXSTATUS + if (DHD_PKTTAG_WLFCPKT(PKTTAG(pkt)) == 0) +#endif /* PROP_TXSTATUS */ + { +#ifdef DHDTCPACK_SUPPRESS + if (dhd_tcpack_check_xmit(bus->dhd, pkt) == BCME_ERROR) { + DHD_ERROR(("%s %d: tcpack_suppress ERROR!!! Stop using\n", + __FUNCTION__, __LINE__)); + dhd_tcpack_suppress_set(bus->dhd, TCPACK_SUP_OFF); + } +#endif /* DHDTCPACK_SUPPRESS */ + dhd_txcomplete(bus->dhd, pkt, FALSE); + PKTFREE(osh, pkt, TRUE); + } + ret = BCME_NORESOURCE; + } else + ret = BCME_OK; + + dhd_os_sdlock_txq(bus->dhd); + pkq_len = pktq_len(&bus->txq); + dhd_os_sdunlock_txq(bus->dhd); + if (pkq_len >= FCHI) { + bool wlfc_enabled = FALSE; +#ifdef PROP_TXSTATUS + wlfc_enabled = (dhd_wlfc_flowcontrol(bus->dhd, ON, FALSE) != + WLFC_UNSUPPORTED); +#endif + if (!wlfc_enabled && dhd_doflow) { + dhd_txflowcontrol(bus->dhd, ALL_INTERFACES, ON); + } + } + +#ifdef DHD_DEBUG + dhd_os_sdlock_txq(bus->dhd); + if (pktq_plen(&bus->txq, prec) > qcount[prec]) + qcount[prec] = pktq_plen(&bus->txq, prec); + dhd_os_sdunlock_txq(bus->dhd); +#endif + + /* Schedule DPC if needed to send queued packet(s) */ + if (dhd_deferred_tx && !bus->dpc_sched) { + bus->dpc_sched = TRUE; + dhd_sched_dpc(bus->dhd); + } + } else { + int chan = SDPCM_DATA_CHANNEL; + +#ifdef SDTEST + chan = (bus->ext_loop ? SDPCM_TEST_CHANNEL : SDPCM_DATA_CHANNEL); +#endif + /* Lock: we're about to use shared data/code (and SDIO) */ + dhd_os_sdlock(bus->dhd); + + /* Otherwise, send it now */ + BUS_WAKE(bus); + /* Make sure back plane ht clk is on, no pending allowed */ + dhdsdio_clkctl(bus, CLK_AVAIL, TRUE); + + ret = dhdsdio_txpkt(bus, chan, &pkt, 1, TRUE); + + if (ret != BCME_OK) + bus->dhd->tx_errors++; + else + bus->dhd->dstats.tx_bytes += datalen; + + if ((bus->idletime == DHD_IDLE_IMMEDIATE) && !bus->dpc_sched) { + bus->activity = FALSE; + dhdsdio_clkctl(bus, CLK_NONE, TRUE); + } + + dhd_os_sdunlock(bus->dhd); + } + + return ret; +} + +/* align packet data pointer and packet length to n-byte boundary, process packet headers, + * a new packet may be allocated if there is not enough head and/or tail from for padding. + * the caller is responsible for updating the glom size in the head packet (when glom is + * used) + * + * pad_pkt_len: returns the length of extra padding needed from the padding packet, this parameter + * is taken in tx glom mode only + * + * new_pkt: out, pointer of the new packet allocated due to insufficient head room for alignment + * padding, NULL if not needed, the caller is responsible for freeing the new packet + * + * return: positive value - length of the packet, including head and tail padding + * negative value - errors + */ +static int dhdsdio_txpkt_preprocess(dhd_bus_t *bus, void *pkt, int chan, int txseq, + int prev_chain_total_len, bool last_chained_pkt, + int *pad_pkt_len, void **new_pkt) +{ + osl_t *osh; + uint8 *frame; + int pkt_len; + int modulo; + int head_padding; + int tail_padding = 0; + uint32 swheader; + uint32 swhdr_offset; + bool alloc_new_pkt = FALSE; + uint8 sdpcm_hdrlen = bus->txglom_enable ? SDPCM_HDRLEN_TXGLOM : SDPCM_HDRLEN; + + *new_pkt = NULL; + osh = bus->dhd->osh; + +#ifdef DHDTCPACK_SUPPRESS + if (dhd_tcpack_check_xmit(bus->dhd, pkt) == BCME_ERROR) { + DHD_ERROR(("%s %d: tcpack_suppress ERROR!!! Stop using it\n", + __FUNCTION__, __LINE__)); + dhd_tcpack_suppress_set(bus->dhd, TCPACK_SUP_OFF); + } +#endif /* DHDTCPACK_SUPPRESS */ + + /* Add space for the SDPCM hardware/software headers */ + PKTPUSH(osh, pkt, sdpcm_hdrlen); + ASSERT(ISALIGNED((uintptr)PKTDATA(osh, pkt), 2)); + + frame = (uint8*)PKTDATA(osh, pkt); + pkt_len = (uint16)PKTLEN(osh, pkt); + +#ifdef WLMEDIA_HTSF + frame = (uint8*)PKTDATA(osh, pkt); + if (PKTLEN(osh, pkt) >= 100) { + htsf_ts = (htsfts_t*) (frame + HTSF_HOSTOFFSET + 12); + if (htsf_ts->magic == HTSFMAGIC) { + htsf_ts->c20 = get_cycles(); + htsf_ts->t20 = dhd_get_htsf(bus->dhd->info, 0); + } + } +#endif /* WLMEDIA_HTSF */ +#ifdef DHD_DEBUG + if (PKTPRIO(pkt) < ARRAYSIZE(tx_packets)) + tx_packets[PKTPRIO(pkt)]++; +#endif /* DHD_DEBUG */ + + /* align the data pointer, allocate a new packet if there is not enough space (new + * packet data pointer will be aligned thus no padding will be needed) + */ + head_padding = (ulong)frame % DHD_SDALIGN; + if (PKTHEADROOM(osh, pkt) < head_padding) { + head_padding = 0; + alloc_new_pkt = TRUE; + } else { + uint cur_chain_total_len; + int chain_tail_padding = 0; + + /* All packets need to be aligned by DHD_SDALIGN */ + modulo = (pkt_len + head_padding) % DHD_SDALIGN; + tail_padding = modulo > 0 ? (DHD_SDALIGN - modulo) : 0; + + /* Total pkt chain length needs to be aligned by block size, + * unless it is a single pkt chain with total length less than one block size, + * which we prefer sending by byte mode. + * + * Do the chain alignment here if + * 1. This is the last pkt of the chain of multiple pkts or a single pkt. + * 2-1. This chain is of multiple pkts, or + * 2-2. This is a single pkt whose size is longer than one block size. + */ + cur_chain_total_len = prev_chain_total_len + + (head_padding + pkt_len + tail_padding); + if (last_chained_pkt && bus->blocksize != 0 && + (cur_chain_total_len > (int)bus->blocksize || prev_chain_total_len > 0)) { + modulo = cur_chain_total_len % bus->blocksize; + chain_tail_padding = modulo > 0 ? (bus->blocksize - modulo) : 0; + } + +#ifdef DHDENABLE_TAILPAD + if (PKTTAILROOM(osh, pkt) < tail_padding) { + /* We don't have tail room to align by DHD_SDALIGN */ + alloc_new_pkt = TRUE; + bus->tx_tailpad_pktget++; + } else if (PKTTAILROOM(osh, pkt) < tail_padding + chain_tail_padding) { + /* We have tail room for tail_padding of this pkt itself, but not for + * total pkt chain alignment by block size. + * Use the padding packet to avoid memory copy if applicable, + * otherwise, just allocate a new pkt. + */ + if (bus->pad_pkt) { + *pad_pkt_len = chain_tail_padding; + bus->tx_tailpad_chain++; + } else { + alloc_new_pkt = TRUE; + bus->tx_tailpad_pktget++; + } + } else + /* This last pkt's tailroom is sufficient to hold both tail_padding + * of the pkt itself and chain_tail_padding of total pkt chain + */ +#endif /* DHDENABLE_TAILPAD */ + tail_padding += chain_tail_padding; + } + + DHD_INFO(("%s sdhdr len + orig_pkt_len %d h_pad %d t_pad %d pad_pkt_len %d\n", + __FUNCTION__, pkt_len, head_padding, tail_padding, *pad_pkt_len)); + + if (alloc_new_pkt) { + void *tmp_pkt; + int newpkt_size; + int cur_total_len; + + ASSERT(*pad_pkt_len == 0); + + DHD_INFO(("%s allocating new packet for padding\n", __FUNCTION__)); + + /* head pointer is aligned now, no padding needed */ + head_padding = 0; + + /* update the tail padding as it depends on the head padding, since a new packet is + * allocated, the head padding is non longer needed and packet length is chagned + */ + + cur_total_len = prev_chain_total_len + pkt_len; + if (last_chained_pkt && bus->blocksize != 0 && + (cur_total_len > (int)bus->blocksize || prev_chain_total_len > 0)) { + modulo = cur_total_len % bus->blocksize; + tail_padding = modulo > 0 ? (bus->blocksize - modulo) : 0; + } + else { + modulo = pkt_len % DHD_SDALIGN; + tail_padding = modulo > 0 ? (DHD_SDALIGN - modulo) : 0; + } + + newpkt_size = PKTLEN(osh, pkt) + bus->blocksize + DHD_SDALIGN; + bus->dhd->tx_realloc++; + tmp_pkt = PKTGET(osh, newpkt_size, TRUE); + if (tmp_pkt == NULL) { + DHD_ERROR(("failed to alloc new %d byte packet\n", newpkt_size)); + return BCME_NOMEM; + } + PKTALIGN(osh, tmp_pkt, PKTLEN(osh, pkt), DHD_SDALIGN); + bcopy(PKTDATA(osh, pkt), PKTDATA(osh, tmp_pkt), PKTLEN(osh, pkt)); + *new_pkt = tmp_pkt; + pkt = tmp_pkt; + } + + if (head_padding) + PKTPUSH(osh, pkt, head_padding); + + frame = (uint8*)PKTDATA(osh, pkt); + bzero(frame, head_padding + sdpcm_hdrlen); + pkt_len = (uint16)PKTLEN(osh, pkt); + + /* the header has the followming format + * 4-byte HW frame tag: length, ~length (for glom this is the total length) + * + * 8-byte HW extesion flags (glom mode only) as the following: + * 2-byte packet length, excluding HW tag and padding + * 2-byte frame channel and frame flags (e.g. next frame following) + * 2-byte header length + * 2-byte tail padding size + * + * 8-byte SW frame tags as the following + * 4-byte flags: host tx seq, channel, data offset + * 4-byte flags: TBD + */ + + swhdr_offset = SDPCM_FRAMETAG_LEN; + + /* hardware frame tag: + * + * in tx-glom mode, dongle only checks the hardware frame tag in the first + * packet and sees it as the total lenght of the glom (including tail padding), + * for each packet in the glom, the packet length needs to be updated, (see + * below PKTSETLEN) + * + * in non tx-glom mode, PKTLEN still need to include tail padding as to be + * referred to in sdioh_request_buffer(). The tail length will be excluded in + * dhdsdio_txpkt_postprocess(). + */ + *(uint16*)frame = (uint16)htol16(pkt_len); + *(((uint16*)frame) + 1) = (uint16)htol16(~pkt_len); + pkt_len += tail_padding; + + /* hardware extesion flags */ + if (bus->txglom_enable) { + uint32 hwheader1; + uint32 hwheader2; + + swhdr_offset += SDPCM_HWEXT_LEN; + hwheader1 = (pkt_len - SDPCM_FRAMETAG_LEN - tail_padding) | + (last_chained_pkt << 24); + hwheader2 = (tail_padding) << 16; + htol32_ua_store(hwheader1, frame + SDPCM_FRAMETAG_LEN); + htol32_ua_store(hwheader2, frame + SDPCM_FRAMETAG_LEN + 4); + } + PKTSETLEN((osh), (pkt), (pkt_len)); + + /* software frame tags */ + swheader = ((chan << SDPCM_CHANNEL_SHIFT) & SDPCM_CHANNEL_MASK) + | (txseq % SDPCM_SEQUENCE_WRAP) | + (((head_padding + sdpcm_hdrlen) << SDPCM_DOFFSET_SHIFT) & SDPCM_DOFFSET_MASK); + htol32_ua_store(swheader, frame + swhdr_offset); + htol32_ua_store(0, frame + swhdr_offset + sizeof(swheader)); + + return pkt_len; +} + +static int dhdsdio_txpkt_postprocess(dhd_bus_t *bus, void *pkt) +{ + osl_t *osh; + uint8 *frame; + int data_offset; + int tail_padding; + int swhdr_offset = SDPCM_FRAMETAG_LEN + (bus->txglom_enable ? SDPCM_HWEXT_LEN : 0); + + (void)osh; + osh = bus->dhd->osh; + + /* restore pkt buffer pointer, but keeps the header pushed by dhd_prot_hdrpush */ + frame = (uint8*)PKTDATA(osh, pkt); + + DHD_INFO(("%s PKTLEN before postprocess %d", + __FUNCTION__, PKTLEN(osh, pkt))); + + /* PKTLEN still includes tail_padding, so exclude it. + * We shall have head_padding + original pkt_len for PKTLEN afterwards. + */ + if (bus->txglom_enable) { + /* txglom pkts have tail_padding length in HW ext header */ + tail_padding = ltoh32_ua(frame + SDPCM_FRAMETAG_LEN + 4) >> 16; + PKTSETLEN(osh, pkt, PKTLEN(osh, pkt) - tail_padding); + DHD_INFO((" txglom pkt: tail_padding %d PKTLEN %d\n", + tail_padding, PKTLEN(osh, pkt))); + } else { + /* non-txglom pkts have head_padding + original pkt length in HW frame tag. + * We cannot refer to this field for txglom pkts as the first pkt of the chain will + * have the field for the total length of the chain. + */ + PKTSETLEN(osh, pkt, *(uint16*)frame); + DHD_INFO((" non-txglom pkt: HW frame tag len %d after PKTLEN %d\n", + *(uint16*)frame, PKTLEN(osh, pkt))); + } + + data_offset = ltoh32_ua(frame + swhdr_offset); + data_offset = (data_offset & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT; + /* Get rid of sdpcm header + head_padding */ + PKTPULL(osh, pkt, data_offset); + + DHD_INFO(("%s data_offset %d, PKTLEN %d\n", + __FUNCTION__, data_offset, PKTLEN(osh, pkt))); + + return BCME_OK; +} + +static int dhdsdio_txpkt(dhd_bus_t *bus, uint chan, void** pkts, int num_pkt, bool free_pkt) +{ + int i; + int ret = 0; + osl_t *osh; + bcmsdh_info_t *sdh; + void *pkt = NULL; + void *pkt_chain; + int total_len = 0; + void *head_pkt = NULL; + void *prev_pkt = NULL; + int pad_pkt_len = 0; + int new_pkt_num = 0; + void *new_pkts[MAX_TX_PKTCHAIN_CNT]; + bool wlfc_enabled = FALSE; + + if (bus->dhd->dongle_reset) + return BCME_NOTREADY; + + sdh = bus->sdh; + osh = bus->dhd->osh; + /* init new_pkts[0] to make some compiler happy, not necessary as we check new_pkt_num */ + new_pkts[0] = NULL; + + for (i = 0; i < num_pkt; i++) { + int pkt_len; + bool last_pkt; + void *new_pkt = NULL; + + pkt = pkts[i]; + ASSERT(pkt); + last_pkt = (i == num_pkt - 1); + pkt_len = dhdsdio_txpkt_preprocess(bus, pkt, chan, bus->tx_seq + i, + total_len, last_pkt, &pad_pkt_len, &new_pkt); + if (pkt_len <= 0) + goto done; + if (new_pkt) { + pkt = new_pkt; + new_pkts[new_pkt_num++] = new_pkt; + } + total_len += pkt_len; + + PKTSETNEXT(osh, pkt, NULL); + /* insert the packet into the list */ + head_pkt ? PKTSETNEXT(osh, prev_pkt, pkt) : (head_pkt = pkt); + prev_pkt = pkt; + + } + + /* Update the HW frame tag (total length) in the first pkt of the glom */ + if (bus->txglom_enable) { + uint8 *frame; + + total_len += pad_pkt_len; + frame = (uint8*)PKTDATA(osh, head_pkt); + *(uint16*)frame = (uint16)htol16(total_len); + *(((uint16*)frame) + 1) = (uint16)htol16(~total_len); + + } + + /* if a padding packet if needed, insert it to the end of the link list */ + if (pad_pkt_len) { + PKTSETLEN(osh, bus->pad_pkt, pad_pkt_len); + PKTSETNEXT(osh, pkt, bus->pad_pkt); + } + + /* dhd_bcmsdh_send_buf ignores the buffer pointer if he packet + * parameter is not NULL, for non packet chian we pass NULL pkt pointer + * so it will take the aligned length and buffer pointer. + */ + pkt_chain = PKTNEXT(osh, head_pkt) ? head_pkt : NULL; + ret = dhd_bcmsdh_send_buf(bus, bcmsdh_cur_sbwad(sdh), SDIO_FUNC_2, F2SYNC, + PKTDATA(osh, head_pkt), total_len, pkt_chain, NULL, NULL, TXRETRIES); + if (ret == BCME_OK) + bus->tx_seq = (bus->tx_seq + num_pkt) % SDPCM_SEQUENCE_WRAP; + + /* if a padding packet was needed, remove it from the link list as it not a data pkt */ + if (pad_pkt_len && pkt) + PKTSETNEXT(osh, pkt, NULL); + +done: + pkt = head_pkt; + while (pkt) { + void *pkt_next = PKTNEXT(osh, pkt); + PKTSETNEXT(osh, pkt, NULL); + dhdsdio_txpkt_postprocess(bus, pkt); + pkt = pkt_next; + } + + /* new packets might be allocated due to insufficient room for padding, but we + * still have to indicate the original packets to upper layer + */ + for (i = 0; i < num_pkt; i++) { + pkt = pkts[i]; + wlfc_enabled = FALSE; +#ifdef PROP_TXSTATUS + if (DHD_PKTTAG_WLFCPKT(PKTTAG(pkt))) { + wlfc_enabled = (dhd_wlfc_txcomplete(bus->dhd, pkt, ret == 0) != + WLFC_UNSUPPORTED); + } +#endif /* PROP_TXSTATUS */ + if (!wlfc_enabled) { + PKTSETNEXT(osh, pkt, NULL); + dhd_txcomplete(bus->dhd, pkt, ret != 0); + if (free_pkt) + PKTFREE(osh, pkt, TRUE); + } + } + for (i = 0; i < new_pkt_num; i++) + PKTFREE(osh, new_pkts[i], TRUE); + + return ret; +} + +static uint +dhdsdio_sendfromq(dhd_bus_t *bus, uint maxframes) +{ + uint cnt = 0; + uint8 tx_prec_map; + uint16 txpktqlen = 0; + uint32 intstatus = 0; + uint retries = 0; + osl_t *osh; + uint datalen = 0; + dhd_pub_t *dhd = bus->dhd; + sdpcmd_regs_t *regs = bus->regs; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + if (!KSO_ENAB(bus)) { + DHD_ERROR(("%s: Device asleep\n", __FUNCTION__)); + return BCME_NODEVICE; + } + + osh = dhd->osh; + tx_prec_map = ~bus->flowcontrol; + for (cnt = 0; (cnt < maxframes) && DATAOK(bus);) { + int i; + int num_pkt = 1; + void *pkts[MAX_TX_PKTCHAIN_CNT]; + int prec_out; + + dhd_os_sdlock_txq(bus->dhd); + if (bus->txglom_enable) { + num_pkt = MIN((uint32)DATABUFCNT(bus), (uint32)bus->txglomsize); + num_pkt = MIN(num_pkt, ARRAYSIZE(pkts)); + } + num_pkt = MIN(num_pkt, pktq_mlen(&bus->txq, tx_prec_map)); + for (i = 0; i < num_pkt; i++) { + pkts[i] = pktq_mdeq(&bus->txq, ~bus->flowcontrol, &prec_out); + if (!pkts[i]) { + DHD_ERROR(("%s: pktg_mlen non-zero when no pkt\n", + __FUNCTION__)); + ASSERT(0); + break; + } + PKTORPHAN(pkts[i]); + datalen += PKTLEN(osh, pkts[i]); + } + dhd_os_sdunlock_txq(bus->dhd); + + if (i == 0) + break; + if (dhdsdio_txpkt(bus, SDPCM_DATA_CHANNEL, pkts, i, TRUE) != BCME_OK) + dhd->tx_errors++; + else + dhd->dstats.tx_bytes += datalen; + cnt += i; + + /* In poll mode, need to check for other events */ + if (!bus->intr && cnt) + { + /* Check device status, signal pending interrupt */ + R_SDREG(intstatus, ®s->intstatus, retries); + bus->f2txdata++; + if (bcmsdh_regfail(bus->sdh)) + break; + if (intstatus & bus->hostintmask) + bus->ipend = TRUE; + } + + } + + dhd_os_sdlock_txq(bus->dhd); + txpktqlen = pktq_len(&bus->txq); + dhd_os_sdunlock_txq(bus->dhd); + + /* Do flow-control if needed */ + if (dhd->up && (dhd->busstate == DHD_BUS_DATA) && (txpktqlen < FCLOW)) { + bool wlfc_enabled = FALSE; +#ifdef PROP_TXSTATUS + wlfc_enabled = (dhd_wlfc_flowcontrol(dhd, OFF, TRUE) != WLFC_UNSUPPORTED); +#endif + if (!wlfc_enabled && dhd_doflow && dhd->txoff) { + dhd_txflowcontrol(dhd, ALL_INTERFACES, OFF); + } + } + + return cnt; +} + +static void +dhdsdio_sendpendctl(dhd_bus_t *bus) +{ + bcmsdh_info_t *sdh = bus->sdh; + int ret; + uint8* frame_seq = bus->ctrl_frame_buf + SDPCM_FRAMETAG_LEN; + + if (bus->txglom_enable) + frame_seq += SDPCM_HWEXT_LEN; + + if (*frame_seq != bus->tx_seq) { + DHD_INFO(("%s IOCTL frame seq lag detected!" + " frm_seq:%d != bus->tx_seq:%d, corrected\n", + __FUNCTION__, *frame_seq, bus->tx_seq)); + *frame_seq = bus->tx_seq; + } + + ret = dhd_bcmsdh_send_buf(bus, bcmsdh_cur_sbwad(sdh), SDIO_FUNC_2, F2SYNC, + (uint8 *)bus->ctrl_frame_buf, (uint32)bus->ctrl_frame_len, + NULL, NULL, NULL, 1); + if (ret == BCME_OK) + bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP; + + bus->ctrl_frame_stat = FALSE; + dhd_wait_event_wakeup(bus->dhd); +} + +int +dhd_bus_txctl(struct dhd_bus *bus, uchar *msg, uint msglen) +{ + static int err_nodevice = 0; + uint8 *frame; + uint16 len; + uint32 swheader; + bcmsdh_info_t *sdh = bus->sdh; + uint8 doff = 0; + int ret = -1; + uint8 sdpcm_hdrlen = bus->txglom_enable ? SDPCM_HDRLEN_TXGLOM : SDPCM_HDRLEN; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + if (bus->dhd->dongle_reset) + return -EIO; + + /* Back the pointer to make a room for bus header */ + frame = msg - sdpcm_hdrlen; + len = (msglen += sdpcm_hdrlen); + + /* Add alignment padding (optional for ctl frames) */ + if (dhd_alignctl) { + if ((doff = ((uintptr)frame % DHD_SDALIGN))) { + frame -= doff; + len += doff; + msglen += doff; + bzero(frame, doff + sdpcm_hdrlen); + } + ASSERT(doff < DHD_SDALIGN); + } + doff += sdpcm_hdrlen; + + /* Round send length to next SDIO block */ + if (bus->roundup && bus->blocksize && (len > bus->blocksize)) { + uint16 pad = bus->blocksize - (len % bus->blocksize); + if ((pad <= bus->roundup) && (pad < bus->blocksize)) + len += pad; + } else if (len % DHD_SDALIGN) { + len += DHD_SDALIGN - (len % DHD_SDALIGN); + } + + /* Satisfy length-alignment requirements */ + if (forcealign && (len & (ALIGNMENT - 1))) + len = ROUNDUP(len, ALIGNMENT); + + ASSERT(ISALIGNED((uintptr)frame, 2)); + + + /* Need to lock here to protect txseq and SDIO tx calls */ + dhd_os_sdlock(bus->dhd); + + BUS_WAKE(bus); + + /* Make sure backplane clock is on */ + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + + /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */ + *(uint16*)frame = htol16((uint16)msglen); + *(((uint16*)frame) + 1) = htol16(~msglen); + + if (bus->txglom_enable) { + uint32 hwheader1, hwheader2; + /* Software tag: channel, sequence number, data offset */ + swheader = ((SDPCM_CONTROL_CHANNEL << SDPCM_CHANNEL_SHIFT) & SDPCM_CHANNEL_MASK) + | bus->tx_seq + | ((doff << SDPCM_DOFFSET_SHIFT) & SDPCM_DOFFSET_MASK); + htol32_ua_store(swheader, frame + SDPCM_FRAMETAG_LEN + SDPCM_HWEXT_LEN); + htol32_ua_store(0, frame + SDPCM_FRAMETAG_LEN + + SDPCM_HWEXT_LEN + sizeof(swheader)); + + hwheader1 = (msglen - SDPCM_FRAMETAG_LEN) | (1 << 24); + hwheader2 = (len - (msglen)) << 16; + htol32_ua_store(hwheader1, frame + SDPCM_FRAMETAG_LEN); + htol32_ua_store(hwheader2, frame + SDPCM_FRAMETAG_LEN + 4); + + *(uint16*)frame = htol16(len); + *(((uint16*)frame) + 1) = htol16(~(len)); + } else { + /* Software tag: channel, sequence number, data offset */ + swheader = ((SDPCM_CONTROL_CHANNEL << SDPCM_CHANNEL_SHIFT) & SDPCM_CHANNEL_MASK) + | bus->tx_seq | ((doff << SDPCM_DOFFSET_SHIFT) & SDPCM_DOFFSET_MASK); + htol32_ua_store(swheader, frame + SDPCM_FRAMETAG_LEN); + htol32_ua_store(0, frame + SDPCM_FRAMETAG_LEN + sizeof(swheader)); + } + if (!TXCTLOK(bus)) { + DHD_INFO(("%s: No bus credit bus->tx_max %d, bus->tx_seq %d\n", + __FUNCTION__, bus->tx_max, bus->tx_seq)); + bus->ctrl_frame_stat = TRUE; + /* Send from dpc */ + bus->ctrl_frame_buf = frame; + bus->ctrl_frame_len = len; + + if (!bus->dpc_sched) { + bus->dpc_sched = TRUE; + dhd_sched_dpc(bus->dhd); + } + if (bus->ctrl_frame_stat) { + dhd_wait_for_event(bus->dhd, &bus->ctrl_frame_stat); + } + + if (bus->ctrl_frame_stat == FALSE) { + DHD_INFO(("%s: ctrl_frame_stat == FALSE\n", __FUNCTION__)); + ret = 0; + } else { + bus->dhd->txcnt_timeout++; + if (!bus->dhd->hang_was_sent) { + DHD_ERROR(("%s: ctrl_frame_stat == TRUE txcnt_timeout=%d\n", + __FUNCTION__, bus->dhd->txcnt_timeout)); + } + ret = -1; + bus->ctrl_frame_stat = FALSE; + goto done; + } + } + + bus->dhd->txcnt_timeout = 0; + bus->ctrl_frame_stat = TRUE; + + if (ret == -1) { +#ifdef DHD_DEBUG + if (DHD_BYTES_ON() && DHD_CTL_ON()) { + prhex("Tx Frame", frame, len); + } else if (DHD_HDRS_ON()) { + prhex("TxHdr", frame, MIN(len, 16)); + } +#endif + ret = dhd_bcmsdh_send_buf(bus, bcmsdh_cur_sbwad(sdh), SDIO_FUNC_2, F2SYNC, + frame, len, NULL, NULL, NULL, TXRETRIES); + if (ret == BCME_OK) + bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP; + } + bus->ctrl_frame_stat = FALSE; + +done: + if ((bus->idletime == DHD_IDLE_IMMEDIATE) && !bus->dpc_sched) { + bus->activity = FALSE; + dhdsdio_clkctl(bus, CLK_NONE, TRUE); + } + + dhd_os_sdunlock(bus->dhd); + + if (ret) + bus->dhd->tx_ctlerrs++; + else + bus->dhd->tx_ctlpkts++; + + if (bus->dhd->txcnt_timeout >= MAX_CNTL_TX_TIMEOUT) + return -ETIMEDOUT; + + if (ret == BCME_NODEVICE) + err_nodevice++; + else + err_nodevice = 0; + + return ret ? err_nodevice >= ERROR_BCME_NODEVICE_MAX ? -ETIMEDOUT : -EIO : 0; +} + +int +dhd_bus_rxctl(struct dhd_bus *bus, uchar *msg, uint msglen) +{ + int timeleft; + uint rxlen = 0; + bool pending; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + if (bus->dhd->dongle_reset) + return -EIO; + + /* Wait until control frame is available */ + timeleft = dhd_os_ioctl_resp_wait(bus->dhd, &bus->rxlen, &pending); + + dhd_os_sdlock(bus->dhd); + rxlen = bus->rxlen; + bcopy(bus->rxctl, msg, MIN(msglen, rxlen)); + bus->rxlen = 0; + dhd_os_sdunlock(bus->dhd); + + if (rxlen) { + DHD_CTL(("%s: resumed on rxctl frame, got %d expected %d\n", + __FUNCTION__, rxlen, msglen)); + } else if (timeleft == 0) { +#ifdef DHD_DEBUG + uint32 status, retry = 0; + R_SDREG(status, &bus->regs->intstatus, retry); + DHD_ERROR(("%s: resumed on timeout, INT status=0x%08X\n", + __FUNCTION__, status)); +#else + DHD_ERROR(("%s: resumed on timeout\n", __FUNCTION__)); +#endif /* DHD_DEBUG */ +#ifdef DHD_DEBUG + dhd_os_sdlock(bus->dhd); + dhdsdio_checkdied(bus, NULL, 0); + dhd_os_sdunlock(bus->dhd); +#endif /* DHD_DEBUG */ + } else if (pending == TRUE) { + /* signal pending */ + DHD_ERROR(("%s: signal pending\n", __FUNCTION__)); + return -EINTR; + + } else { + DHD_CTL(("%s: resumed for unknown reason?\n", __FUNCTION__)); +#ifdef DHD_DEBUG + dhd_os_sdlock(bus->dhd); + dhdsdio_checkdied(bus, NULL, 0); + dhd_os_sdunlock(bus->dhd); +#endif /* DHD_DEBUG */ + } + if (timeleft == 0) { + if (rxlen == 0) + bus->dhd->rxcnt_timeout++; + DHD_ERROR(("%s: rxcnt_timeout=%d, rxlen=%d\n", __FUNCTION__, + bus->dhd->rxcnt_timeout, rxlen)); + } + else + bus->dhd->rxcnt_timeout = 0; + + if (rxlen) + bus->dhd->rx_ctlpkts++; + else + bus->dhd->rx_ctlerrs++; + + if (bus->dhd->rxcnt_timeout >= MAX_CNTL_RX_TIMEOUT) + return -ETIMEDOUT; + + if (bus->dhd->dongle_trap_occured) + return -EREMOTEIO; + + return rxlen ? (int)rxlen : -EIO; +} + +/* IOVar table */ +enum { + IOV_INTR = 1, + IOV_POLLRATE, + IOV_SDREG, + IOV_SBREG, + IOV_SDCIS, + IOV_MEMBYTES, + IOV_RAMSIZE, + IOV_RAMSTART, +#ifdef DHD_DEBUG + IOV_CHECKDIED, + IOV_SERIALCONS, +#endif /* DHD_DEBUG */ + IOV_SET_DOWNLOAD_STATE, + IOV_SOCRAM_STATE, + IOV_FORCEEVEN, + IOV_SDIOD_DRIVE, + IOV_READAHEAD, + IOV_SDRXCHAIN, + IOV_ALIGNCTL, + IOV_SDALIGN, + IOV_DEVRESET, + IOV_CPU, +#if defined(USE_SDIOFIFO_IOVAR) + IOV_WATERMARK, + IOV_MESBUSYCTRL, +#endif /* USE_SDIOFIFO_IOVAR */ +#ifdef SDTEST + IOV_PKTGEN, + IOV_EXTLOOP, +#endif /* SDTEST */ + IOV_SPROM, + IOV_TXBOUND, + IOV_RXBOUND, + IOV_TXMINMAX, + IOV_IDLETIME, + IOV_IDLECLOCK, + IOV_SD1IDLE, + IOV_SLEEP, + IOV_DONGLEISOLATION, + IOV_KSO, + IOV_DEVSLEEP, + IOV_DEVCAP, + IOV_VARS, +#ifdef SOFTAP + IOV_FWPATH, +#endif + IOV_TXGLOMSIZE, + IOV_TXGLOMMODE, + IOV_HANGREPORT, + IOV_TXINRX_THRES +}; + +const bcm_iovar_t dhdsdio_iovars[] = { + {"intr", IOV_INTR, 0, IOVT_BOOL, 0 }, + {"sleep", IOV_SLEEP, 0, IOVT_BOOL, 0 }, + {"pollrate", IOV_POLLRATE, 0, IOVT_UINT32, 0 }, + {"idletime", IOV_IDLETIME, 0, IOVT_INT32, 0 }, + {"idleclock", IOV_IDLECLOCK, 0, IOVT_INT32, 0 }, + {"sd1idle", IOV_SD1IDLE, 0, IOVT_BOOL, 0 }, + {"membytes", IOV_MEMBYTES, 0, IOVT_BUFFER, 2 * sizeof(int) }, + {"ramsize", IOV_RAMSIZE, 0, IOVT_UINT32, 0 }, + {"ramstart", IOV_RAMSTART, 0, IOVT_UINT32, 0 }, + {"dwnldstate", IOV_SET_DOWNLOAD_STATE, 0, IOVT_BOOL, 0 }, + {"socram_state", IOV_SOCRAM_STATE, 0, IOVT_BOOL, 0 }, + {"vars", IOV_VARS, 0, IOVT_BUFFER, 0 }, + {"sdiod_drive", IOV_SDIOD_DRIVE, 0, IOVT_UINT32, 0 }, + {"readahead", IOV_READAHEAD, 0, IOVT_BOOL, 0 }, + {"sdrxchain", IOV_SDRXCHAIN, 0, IOVT_BOOL, 0 }, + {"alignctl", IOV_ALIGNCTL, 0, IOVT_BOOL, 0 }, + {"sdalign", IOV_SDALIGN, 0, IOVT_BOOL, 0 }, + {"devreset", IOV_DEVRESET, 0, IOVT_BOOL, 0 }, +#ifdef DHD_DEBUG + {"sdreg", IOV_SDREG, 0, IOVT_BUFFER, sizeof(sdreg_t) }, + {"sbreg", IOV_SBREG, 0, IOVT_BUFFER, sizeof(sdreg_t) }, + {"sd_cis", IOV_SDCIS, 0, IOVT_BUFFER, DHD_IOCTL_MAXLEN }, + {"forcealign", IOV_FORCEEVEN, 0, IOVT_BOOL, 0 }, + {"txbound", IOV_TXBOUND, 0, IOVT_UINT32, 0 }, + {"rxbound", IOV_RXBOUND, 0, IOVT_UINT32, 0 }, + {"txminmax", IOV_TXMINMAX, 0, IOVT_UINT32, 0 }, + {"cpu", IOV_CPU, 0, IOVT_BOOL, 0 }, +#ifdef DHD_DEBUG + {"checkdied", IOV_CHECKDIED, 0, IOVT_BUFFER, 0 }, + {"serial", IOV_SERIALCONS, 0, IOVT_UINT32, 0 }, +#endif /* DHD_DEBUG */ +#endif /* DHD_DEBUG */ +#ifdef SDTEST + {"extloop", IOV_EXTLOOP, 0, IOVT_BOOL, 0 }, + {"pktgen", IOV_PKTGEN, 0, IOVT_BUFFER, sizeof(dhd_pktgen_t) }, +#endif /* SDTEST */ +#if defined(USE_SDIOFIFO_IOVAR) + {"watermark", IOV_WATERMARK, 0, IOVT_UINT32, 0 }, + {"mesbusyctrl", IOV_MESBUSYCTRL, 0, IOVT_UINT32, 0 }, +#endif /* USE_SDIOFIFO_IOVAR */ + {"devcap", IOV_DEVCAP, 0, IOVT_UINT32, 0 }, + {"dngl_isolation", IOV_DONGLEISOLATION, 0, IOVT_UINT32, 0 }, + {"kso", IOV_KSO, 0, IOVT_UINT32, 0 }, + {"devsleep", IOV_DEVSLEEP, 0, IOVT_UINT32, 0 }, +#ifdef SOFTAP + {"fwpath", IOV_FWPATH, 0, IOVT_BUFFER, 0 }, +#endif + {"txglomsize", IOV_TXGLOMSIZE, 0, IOVT_UINT32, 0 }, + {"fw_hang_report", IOV_HANGREPORT, 0, IOVT_BOOL, 0 }, + {"txinrx_thres", IOV_TXINRX_THRES, 0, IOVT_INT32, 0 }, + {NULL, 0, 0, 0, 0 } +}; + +static void +dhd_dump_pct(struct bcmstrbuf *strbuf, char *desc, uint num, uint div) +{ + uint q1, q2; + + if (!div) { + bcm_bprintf(strbuf, "%s N/A", desc); + } else { + q1 = num / div; + q2 = (100 * (num - (q1 * div))) / div; + bcm_bprintf(strbuf, "%s %d.%02d", desc, q1, q2); + } +} + +void +dhd_bus_dump(dhd_pub_t *dhdp, struct bcmstrbuf *strbuf) +{ + dhd_bus_t *bus = dhdp->bus; + + bcm_bprintf(strbuf, "Bus SDIO structure:\n"); + bcm_bprintf(strbuf, "hostintmask 0x%08x intstatus 0x%08x sdpcm_ver %d\n", + bus->hostintmask, bus->intstatus, bus->sdpcm_ver); + bcm_bprintf(strbuf, "fcstate %d qlen %u tx_seq %d, max %d, rxskip %d rxlen %u rx_seq %d\n", + bus->fcstate, pktq_len(&bus->txq), bus->tx_seq, bus->tx_max, bus->rxskip, + bus->rxlen, bus->rx_seq); + bcm_bprintf(strbuf, "intr %d intrcount %u lastintrs %u spurious %u\n", + bus->intr, bus->intrcount, bus->lastintrs, bus->spurious); + bcm_bprintf(strbuf, "pollrate %u pollcnt %u regfails %u\n", + bus->pollrate, bus->pollcnt, bus->regfails); + + bcm_bprintf(strbuf, "\nAdditional counters:\n"); +#ifdef DHDENABLE_TAILPAD + bcm_bprintf(strbuf, "tx_tailpad_chain %u tx_tailpad_pktget %u\n", + bus->tx_tailpad_chain, bus->tx_tailpad_pktget); +#endif + bcm_bprintf(strbuf, "tx_sderrs %u fcqueued %u rxrtx %u rx_toolong %u rxc_errors %u\n", + bus->tx_sderrs, bus->fcqueued, bus->rxrtx, bus->rx_toolong, + bus->rxc_errors); + bcm_bprintf(strbuf, "rx_hdrfail %u badhdr %u badseq %u\n", + bus->rx_hdrfail, bus->rx_badhdr, bus->rx_badseq); + bcm_bprintf(strbuf, "fc_rcvd %u, fc_xoff %u, fc_xon %u\n", + bus->fc_rcvd, bus->fc_xoff, bus->fc_xon); + bcm_bprintf(strbuf, "rxglomfail %u, rxglomframes %u, rxglompkts %u\n", + bus->rxglomfail, bus->rxglomframes, bus->rxglompkts); + bcm_bprintf(strbuf, "f2rx (hdrs/data) %u (%u/%u), f2tx %u f1regs %u\n", + (bus->f2rxhdrs + bus->f2rxdata), bus->f2rxhdrs, bus->f2rxdata, + bus->f2txdata, bus->f1regdata); + { + dhd_dump_pct(strbuf, "\nRx: pkts/f2rd", bus->dhd->rx_packets, + (bus->f2rxhdrs + bus->f2rxdata)); + dhd_dump_pct(strbuf, ", pkts/f1sd", bus->dhd->rx_packets, bus->f1regdata); + dhd_dump_pct(strbuf, ", pkts/sd", bus->dhd->rx_packets, + (bus->f2rxhdrs + bus->f2rxdata + bus->f1regdata)); + dhd_dump_pct(strbuf, ", pkts/int", bus->dhd->rx_packets, bus->intrcount); + bcm_bprintf(strbuf, "\n"); + + dhd_dump_pct(strbuf, "Rx: glom pct", (100 * bus->rxglompkts), + bus->dhd->rx_packets); + dhd_dump_pct(strbuf, ", pkts/glom", bus->rxglompkts, bus->rxglomframes); + bcm_bprintf(strbuf, "\n"); + + dhd_dump_pct(strbuf, "Tx: pkts/f2wr", bus->dhd->tx_packets, bus->f2txdata); + dhd_dump_pct(strbuf, ", pkts/f1sd", bus->dhd->tx_packets, bus->f1regdata); + dhd_dump_pct(strbuf, ", pkts/sd", bus->dhd->tx_packets, + (bus->f2txdata + bus->f1regdata)); + dhd_dump_pct(strbuf, ", pkts/int", bus->dhd->tx_packets, bus->intrcount); + bcm_bprintf(strbuf, "\n"); + + dhd_dump_pct(strbuf, "Total: pkts/f2rw", + (bus->dhd->tx_packets + bus->dhd->rx_packets), + (bus->f2txdata + bus->f2rxhdrs + bus->f2rxdata)); + dhd_dump_pct(strbuf, ", pkts/f1sd", + (bus->dhd->tx_packets + bus->dhd->rx_packets), bus->f1regdata); + dhd_dump_pct(strbuf, ", pkts/sd", + (bus->dhd->tx_packets + bus->dhd->rx_packets), + (bus->f2txdata + bus->f2rxhdrs + bus->f2rxdata + bus->f1regdata)); + dhd_dump_pct(strbuf, ", pkts/int", + (bus->dhd->tx_packets + bus->dhd->rx_packets), bus->intrcount); + bcm_bprintf(strbuf, "\n\n"); + } + +#ifdef SDTEST + if (bus->pktgen_count) { + bcm_bprintf(strbuf, "pktgen config and count:\n"); + bcm_bprintf(strbuf, "freq %u count %u print %u total %u min %u len %u\n", + bus->pktgen_freq, bus->pktgen_count, bus->pktgen_print, + bus->pktgen_total, bus->pktgen_minlen, bus->pktgen_maxlen); + bcm_bprintf(strbuf, "send attempts %u rcvd %u fail %u\n", + bus->pktgen_sent, bus->pktgen_rcvd, bus->pktgen_fail); + } +#endif /* SDTEST */ +#ifdef DHD_DEBUG + bcm_bprintf(strbuf, "dpc_sched %d host interrupt%spending\n", + bus->dpc_sched, (bcmsdh_intr_pending(bus->sdh) ? " " : " not ")); + bcm_bprintf(strbuf, "blocksize %u roundup %u\n", bus->blocksize, bus->roundup); +#endif /* DHD_DEBUG */ + bcm_bprintf(strbuf, "clkstate %d activity %d idletime %d idlecount %d sleeping %d\n", + bus->clkstate, bus->activity, bus->idletime, bus->idlecount, bus->sleeping); +} + +void +dhd_bus_clearcounts(dhd_pub_t *dhdp) +{ + dhd_bus_t *bus = (dhd_bus_t *)dhdp->bus; + + bus->intrcount = bus->lastintrs = bus->spurious = bus->regfails = 0; + bus->rxrtx = bus->rx_toolong = bus->rxc_errors = 0; + bus->rx_hdrfail = bus->rx_badhdr = bus->rx_badseq = 0; +#ifdef DHDENABLE_TAILPAD + bus->tx_tailpad_chain = bus->tx_tailpad_pktget = 0; +#endif + bus->tx_sderrs = bus->fc_rcvd = bus->fc_xoff = bus->fc_xon = 0; + bus->rxglomfail = bus->rxglomframes = bus->rxglompkts = 0; + bus->f2rxhdrs = bus->f2rxdata = bus->f2txdata = bus->f1regdata = 0; +} + +#ifdef SDTEST +static int +dhdsdio_pktgen_get(dhd_bus_t *bus, uint8 *arg) +{ + dhd_pktgen_t pktgen; + + pktgen.version = DHD_PKTGEN_VERSION; + pktgen.freq = bus->pktgen_freq; + pktgen.count = bus->pktgen_count; + pktgen.print = bus->pktgen_print; + pktgen.total = bus->pktgen_total; + pktgen.minlen = bus->pktgen_minlen; + pktgen.maxlen = bus->pktgen_maxlen; + pktgen.numsent = bus->pktgen_sent; + pktgen.numrcvd = bus->pktgen_rcvd; + pktgen.numfail = bus->pktgen_fail; + pktgen.mode = bus->pktgen_mode; + pktgen.stop = bus->pktgen_stop; + + bcopy(&pktgen, arg, sizeof(pktgen)); + + return 0; +} + +static int +dhdsdio_pktgen_set(dhd_bus_t *bus, uint8 *arg) +{ + dhd_pktgen_t pktgen; + uint oldcnt, oldmode; + + bcopy(arg, &pktgen, sizeof(pktgen)); + if (pktgen.version != DHD_PKTGEN_VERSION) + return BCME_BADARG; + + oldcnt = bus->pktgen_count; + oldmode = bus->pktgen_mode; + + bus->pktgen_freq = pktgen.freq; + bus->pktgen_count = pktgen.count; + bus->pktgen_print = pktgen.print; + bus->pktgen_total = pktgen.total; + bus->pktgen_minlen = pktgen.minlen; + bus->pktgen_maxlen = pktgen.maxlen; + bus->pktgen_mode = pktgen.mode; + bus->pktgen_stop = pktgen.stop; + + bus->pktgen_tick = bus->pktgen_ptick = 0; + bus->pktgen_prev_time = jiffies; + bus->pktgen_len = MAX(bus->pktgen_len, bus->pktgen_minlen); + bus->pktgen_len = MIN(bus->pktgen_len, bus->pktgen_maxlen); + + /* Clear counts for a new pktgen (mode change, or was stopped) */ + if (bus->pktgen_count && (!oldcnt || oldmode != bus->pktgen_mode)) { + bus->pktgen_sent = bus->pktgen_prev_sent = bus->pktgen_rcvd = 0; + bus->pktgen_prev_rcvd = bus->pktgen_fail = 0; + } + + return 0; +} +#endif /* SDTEST */ + +static void +dhdsdio_devram_remap(dhd_bus_t *bus, bool val) +{ + uint8 enable, protect, remap; + + si_socdevram(bus->sih, FALSE, &enable, &protect, &remap); + remap = val ? TRUE : FALSE; + si_socdevram(bus->sih, TRUE, &enable, &protect, &remap); +} + +static int +dhdsdio_membytes(dhd_bus_t *bus, bool write, uint32 address, uint8 *data, uint size) +{ + int bcmerror = 0; + uint32 sdaddr; + uint dsize; + + /* In remap mode, adjust address beyond socram and redirect + * to devram at SOCDEVRAM_BP_ADDR since remap address > orig_ramsize + * is not backplane accessible + */ + if (REMAP_ENAB(bus) && REMAP_ISADDR(bus, address)) { + address -= bus->orig_ramsize; + address += SOCDEVRAM_BP_ADDR; + } + + /* Determine initial transfer parameters */ + sdaddr = address & SBSDIO_SB_OFT_ADDR_MASK; + if ((sdaddr + size) & SBSDIO_SBWINDOW_MASK) + dsize = (SBSDIO_SB_OFT_ADDR_LIMIT - sdaddr); + else + dsize = size; + + /* Set the backplane window to include the start address */ + if ((bcmerror = dhdsdio_set_siaddr_window(bus, address))) { + DHD_ERROR(("%s: window change failed\n", __FUNCTION__)); + goto xfer_done; + } + + /* Do the transfer(s) */ + while (size) { + DHD_INFO(("%s: %s %d bytes at offset 0x%08x in window 0x%08x\n", + __FUNCTION__, (write ? "write" : "read"), dsize, sdaddr, + (address & SBSDIO_SBWINDOW_MASK))); + if ((bcmerror = bcmsdh_rwdata(bus->sdh, write, sdaddr, data, dsize))) { + DHD_ERROR(("%s: membytes transfer failed\n", __FUNCTION__)); + break; + } + + /* Adjust for next transfer (if any) */ + if ((size -= dsize)) { + data += dsize; + address += dsize; + if ((bcmerror = dhdsdio_set_siaddr_window(bus, address))) { + DHD_ERROR(("%s: window change failed\n", __FUNCTION__)); + break; + } + sdaddr = 0; + dsize = MIN(SBSDIO_SB_OFT_ADDR_LIMIT, size); + } + + } + +xfer_done: + /* Return the window to backplane enumeration space for core access */ + if (dhdsdio_set_siaddr_window(bus, bcmsdh_cur_sbwad(bus->sdh))) { + DHD_ERROR(("%s: FAILED to set window back to 0x%x\n", __FUNCTION__, + bcmsdh_cur_sbwad(bus->sdh))); + } + + return bcmerror; +} + +#ifdef DHD_DEBUG +static int +dhdsdio_readshared(dhd_bus_t *bus, sdpcm_shared_t *sh) +{ + uint32 addr; + int rv, i; + uint32 shaddr = 0; + + if (CHIPID(bus->sih->chip) == BCM43430_CHIP_ID && !dhdsdio_sr_cap(bus)) + bus->srmemsize = 0; + + shaddr = bus->dongle_ram_base + bus->ramsize - 4; + i = 0; + do { + /* Read last word in memory to determine address of sdpcm_shared structure */ + if ((rv = dhdsdio_membytes(bus, FALSE, shaddr, (uint8 *)&addr, 4)) < 0) + return rv; + + addr = ltoh32(addr); + + DHD_INFO(("sdpcm_shared address 0x%08X\n", addr)); + + /* + * Check if addr is valid. + * NVRAM length at the end of memory should have been overwritten. + */ + if (addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff)) { + if ((bus->srmemsize > 0) && (i++ == 0)) { + shaddr -= bus->srmemsize; + } else { + DHD_ERROR(("%s: address (0x%08x) of sdpcm_shared invalid\n", + __FUNCTION__, addr)); + return BCME_ERROR; + } + } else + break; + } while (i < 2); + + /* Read hndrte_shared structure */ + if ((rv = dhdsdio_membytes(bus, FALSE, addr, (uint8 *)sh, sizeof(sdpcm_shared_t))) < 0) + return rv; + + /* Endianness */ + sh->flags = ltoh32(sh->flags); + sh->trap_addr = ltoh32(sh->trap_addr); + sh->assert_exp_addr = ltoh32(sh->assert_exp_addr); + sh->assert_file_addr = ltoh32(sh->assert_file_addr); + sh->assert_line = ltoh32(sh->assert_line); + sh->console_addr = ltoh32(sh->console_addr); + sh->msgtrace_addr = ltoh32(sh->msgtrace_addr); + + if ((sh->flags & SDPCM_SHARED_VERSION_MASK) == 3 && SDPCM_SHARED_VERSION == 1) + return BCME_OK; + + if ((sh->flags & SDPCM_SHARED_VERSION_MASK) != SDPCM_SHARED_VERSION) { + DHD_ERROR(("%s: sdpcm_shared version %d in dhd " + "is different than sdpcm_shared version %d in dongle\n", + __FUNCTION__, SDPCM_SHARED_VERSION, + sh->flags & SDPCM_SHARED_VERSION_MASK)); + return BCME_ERROR; + } + + return BCME_OK; +} + +#define CONSOLE_LINE_MAX 192 + +static int +dhdsdio_readconsole(dhd_bus_t *bus) +{ + dhd_console_t *c = &bus->console; + uint8 line[CONSOLE_LINE_MAX], ch; + uint32 n, idx, addr; + int rv; + + /* Don't do anything until FWREADY updates console address */ + if (bus->console_addr == 0) + return 0; + + if (!KSO_ENAB(bus)) + return 0; + + /* Read console log struct */ + addr = bus->console_addr + OFFSETOF(hndrte_cons_t, log); + if ((rv = dhdsdio_membytes(bus, FALSE, addr, (uint8 *)&c->log, sizeof(c->log))) < 0) + return rv; + + /* Allocate console buffer (one time only) */ + if (c->buf == NULL) { + c->bufsize = ltoh32(c->log.buf_size); + if ((c->buf = MALLOC(bus->dhd->osh, c->bufsize)) == NULL) + return BCME_NOMEM; + } + + idx = ltoh32(c->log.idx); + + /* Protect against corrupt value */ + if (idx > c->bufsize) + return BCME_ERROR; + + /* Skip reading the console buffer if the index pointer has not moved */ + if (idx == c->last) + return BCME_OK; + + /* Read the console buffer */ + addr = ltoh32(c->log.buf); + if ((rv = dhdsdio_membytes(bus, FALSE, addr, c->buf, c->bufsize)) < 0) + return rv; + + while (c->last != idx) { + for (n = 0; n < CONSOLE_LINE_MAX - 2; n++) { + if (c->last == idx) { + /* This would output a partial line. Instead, back up + * the buffer pointer and output this line next time around. + */ + if (c->last >= n) + c->last -= n; + else + c->last = c->bufsize - n; + goto break2; + } + ch = c->buf[c->last]; + c->last = (c->last + 1) % c->bufsize; + if (ch == '\n') + break; + line[n] = ch; + } + + if (n > 0) { + if (line[n - 1] == '\r') + n--; + line[n] = 0; + printf("CONSOLE: %s\n", line); +#ifdef LOG_INTO_TCPDUMP + dhd_sendup_log(bus->dhd, line, n); +#endif /* LOG_INTO_TCPDUMP */ + } + } +break2: + + return BCME_OK; +} + +static int +dhdsdio_checkdied(dhd_bus_t *bus, char *data, uint size) +{ + int bcmerror = 0; + uint msize = 512; + char *mbuffer = NULL; + char *console_buffer = NULL; + uint maxstrlen = 256; + char *str = NULL; + trap_t tr; + sdpcm_shared_t sdpcm_shared; + struct bcmstrbuf strbuf; + uint32 console_ptr, console_size, console_index; + uint8 line[CONSOLE_LINE_MAX], ch; + uint32 n, i, addr; + int rv; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + if (DHD_NOCHECKDIED_ON()) + return 0; + + if (data == NULL) { + /* + * Called after a rx ctrl timeout. "data" is NULL. + * allocate memory to trace the trap or assert. + */ + size = msize; + mbuffer = data = MALLOC(bus->dhd->osh, msize); + if (mbuffer == NULL) { + DHD_ERROR(("%s: MALLOC(%d) failed \n", __FUNCTION__, msize)); + bcmerror = BCME_NOMEM; + goto done; + } + } + + if ((str = MALLOC(bus->dhd->osh, maxstrlen)) == NULL) { + DHD_ERROR(("%s: MALLOC(%d) failed \n", __FUNCTION__, maxstrlen)); + bcmerror = BCME_NOMEM; + goto done; + } + + if ((bcmerror = dhdsdio_readshared(bus, &sdpcm_shared)) < 0) + goto done; + + bcm_binit(&strbuf, data, size); + + bcm_bprintf(&strbuf, "msgtrace address : 0x%08X\nconsole address : 0x%08X\n", + sdpcm_shared.msgtrace_addr, sdpcm_shared.console_addr); + + if ((sdpcm_shared.flags & SDPCM_SHARED_ASSERT_BUILT) == 0) { + /* NOTE: Misspelled assert is intentional - DO NOT FIX. + * (Avoids conflict with real asserts for programmatic parsing of output.) + */ + bcm_bprintf(&strbuf, "Assrt not built in dongle\n"); + } + + if ((sdpcm_shared.flags & (SDPCM_SHARED_ASSERT|SDPCM_SHARED_TRAP)) == 0) { + /* NOTE: Misspelled assert is intentional - DO NOT FIX. + * (Avoids conflict with real asserts for programmatic parsing of output.) + */ + bcm_bprintf(&strbuf, "No trap%s in dongle", + (sdpcm_shared.flags & SDPCM_SHARED_ASSERT_BUILT) + ?"/assrt" :""); + } else { + if (sdpcm_shared.flags & SDPCM_SHARED_ASSERT) { + /* Download assert */ + bcm_bprintf(&strbuf, "Dongle assert"); + if (sdpcm_shared.assert_exp_addr != 0) { + str[0] = '\0'; + if ((bcmerror = dhdsdio_membytes(bus, FALSE, + sdpcm_shared.assert_exp_addr, + (uint8 *)str, maxstrlen)) < 0) + goto done; + + str[maxstrlen - 1] = '\0'; + bcm_bprintf(&strbuf, " expr \"%s\"", str); + } + + if (sdpcm_shared.assert_file_addr != 0) { + str[0] = '\0'; + if ((bcmerror = dhdsdio_membytes(bus, FALSE, + sdpcm_shared.assert_file_addr, + (uint8 *)str, maxstrlen)) < 0) + goto done; + + str[maxstrlen - 1] = '\0'; + bcm_bprintf(&strbuf, " file \"%s\"", str); + } + + bcm_bprintf(&strbuf, " line %d ", sdpcm_shared.assert_line); + } + + if (sdpcm_shared.flags & SDPCM_SHARED_TRAP) { + bus->dhd->dongle_trap_occured = TRUE; + if ((bcmerror = dhdsdio_membytes(bus, FALSE, + sdpcm_shared.trap_addr, + (uint8*)&tr, sizeof(trap_t))) < 0) + goto done; + + bcm_bprintf(&strbuf, + "Dongle trap type 0x%x @ epc 0x%x, cpsr 0x%x, spsr 0x%x, sp 0x%x," + "lp 0x%x, rpc 0x%x Trap offset 0x%x, " + "r0 0x%x, r1 0x%x, r2 0x%x, r3 0x%x, " + "r4 0x%x, r5 0x%x, r6 0x%x, r7 0x%x\n\n", + ltoh32(tr.type), ltoh32(tr.epc), ltoh32(tr.cpsr), ltoh32(tr.spsr), + ltoh32(tr.r13), ltoh32(tr.r14), ltoh32(tr.pc), + ltoh32(sdpcm_shared.trap_addr), + ltoh32(tr.r0), ltoh32(tr.r1), ltoh32(tr.r2), ltoh32(tr.r3), + ltoh32(tr.r4), ltoh32(tr.r5), ltoh32(tr.r6), ltoh32(tr.r7)); + + addr = sdpcm_shared.console_addr + OFFSETOF(hndrte_cons_t, log); + if ((rv = dhdsdio_membytes(bus, FALSE, addr, + (uint8 *)&console_ptr, sizeof(console_ptr))) < 0) + goto printbuf; + + addr = sdpcm_shared.console_addr + OFFSETOF(hndrte_cons_t, log.buf_size); + if ((rv = dhdsdio_membytes(bus, FALSE, addr, + (uint8 *)&console_size, sizeof(console_size))) < 0) + goto printbuf; + + addr = sdpcm_shared.console_addr + OFFSETOF(hndrte_cons_t, log.idx); + if ((rv = dhdsdio_membytes(bus, FALSE, addr, + (uint8 *)&console_index, sizeof(console_index))) < 0) + goto printbuf; + + console_ptr = ltoh32(console_ptr); + console_size = ltoh32(console_size); + console_index = ltoh32(console_index); + + if (console_size > CONSOLE_BUFFER_MAX || + !(console_buffer = MALLOC(bus->dhd->osh, console_size))) + goto printbuf; + + if ((rv = dhdsdio_membytes(bus, FALSE, console_ptr, + (uint8 *)console_buffer, console_size)) < 0) + goto printbuf; + + for (i = 0, n = 0; i < console_size; i += n + 1) { + for (n = 0; n < CONSOLE_LINE_MAX - 2; n++) { + ch = console_buffer[(console_index + i + n) % console_size]; + if (ch == '\n') + break; + line[n] = ch; + } + + + if (n > 0) { + if (line[n - 1] == '\r') + n--; + line[n] = 0; + /* Don't use DHD_ERROR macro since we print + * a lot of information quickly. The macro + * will truncate a lot of the printfs + */ + + if (dhd_msg_level & DHD_ERROR_VAL) + printf("CONSOLE: %s\n", line); + } + } + } + } + +printbuf: + if (sdpcm_shared.flags & (SDPCM_SHARED_ASSERT | SDPCM_SHARED_TRAP)) { + DHD_ERROR(("%s: %s\n", __FUNCTION__, strbuf.origbuf)); + } + + +done: + if (mbuffer) + MFREE(bus->dhd->osh, mbuffer, msize); + if (str) + MFREE(bus->dhd->osh, str, maxstrlen); + if (console_buffer) + MFREE(bus->dhd->osh, console_buffer, console_size); + + return bcmerror; +} +#endif /* #ifdef DHD_DEBUG */ + + +int +dhdsdio_downloadvars(dhd_bus_t *bus, void *arg, int len) +{ + int bcmerror = BCME_OK; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + /* Basic sanity checks */ + if (bus->dhd->up) { + bcmerror = BCME_NOTDOWN; + goto err; + } + if (!len) { + bcmerror = BCME_BUFTOOSHORT; + goto err; + } + + /* Free the old ones and replace with passed variables */ + if (bus->vars) + MFREE(bus->dhd->osh, bus->vars, bus->varsz); + + bus->vars = MALLOC(bus->dhd->osh, len); + bus->varsz = bus->vars ? len : 0; + if (bus->vars == NULL) { + bcmerror = BCME_NOMEM; + goto err; + } + + /* Copy the passed variables, which should include the terminating double-null */ + bcopy(arg, bus->vars, bus->varsz); +err: + return bcmerror; +} + +#ifdef DHD_DEBUG + +#define CC_PLL_CHIPCTRL_SERIAL_ENAB (1 << 24) +#define CC_CHIPCTRL_JTAG_SEL (1 << 3) +#define CC_CHIPCTRL_GPIO_SEL (0x3) +#define CC_PLL_CHIPCTRL_SERIAL_ENAB_4334 (1 << 28) + +static int +dhd_serialconsole(dhd_bus_t *bus, bool set, bool enable, int *bcmerror) +{ + int int_val; + uint32 addr, data, uart_enab = 0; + uint32 jtag_sel = CC_CHIPCTRL_JTAG_SEL; + uint32 gpio_sel = CC_CHIPCTRL_GPIO_SEL; + + addr = SI_ENUM_BASE + OFFSETOF(chipcregs_t, chipcontrol_addr); + data = SI_ENUM_BASE + OFFSETOF(chipcregs_t, chipcontrol_data); + *bcmerror = 0; + + bcmsdh_reg_write(bus->sdh, addr, 4, 1); + if (bcmsdh_regfail(bus->sdh)) { + *bcmerror = BCME_SDIO_ERROR; + return -1; + } + int_val = bcmsdh_reg_read(bus->sdh, data, 4); + if (bcmsdh_regfail(bus->sdh)) { + *bcmerror = BCME_SDIO_ERROR; + return -1; + } + if (bus->sih->chip == BCM4330_CHIP_ID) { + uart_enab = CC_PLL_CHIPCTRL_SERIAL_ENAB; + } + else if (bus->sih->chip == BCM4334_CHIP_ID || + bus->sih->chip == BCM43340_CHIP_ID || + bus->sih->chip == BCM43341_CHIP_ID || + bus->sih->chip == BCM43342_CHIP_ID || + 0) { + if (enable) { + /* Moved to PMU chipcontrol 1 from 4330 */ + int_val &= ~gpio_sel; + int_val |= jtag_sel; + } else { + int_val |= gpio_sel; + int_val &= ~jtag_sel; + } + uart_enab = CC_PLL_CHIPCTRL_SERIAL_ENAB_4334; + } + + if (!set) + return (int_val & uart_enab); + if (enable) + int_val |= uart_enab; + else + int_val &= ~uart_enab; + bcmsdh_reg_write(bus->sdh, data, 4, int_val); + if (bcmsdh_regfail(bus->sdh)) { + *bcmerror = BCME_SDIO_ERROR; + return -1; + } + if (bus->sih->chip == BCM4330_CHIP_ID) { + uint32 chipcontrol; + addr = SI_ENUM_BASE + OFFSETOF(chipcregs_t, chipcontrol); + chipcontrol = bcmsdh_reg_read(bus->sdh, addr, 4); + chipcontrol &= ~jtag_sel; + if (enable) { + chipcontrol |= jtag_sel; + chipcontrol &= ~gpio_sel; + } + bcmsdh_reg_write(bus->sdh, addr, 4, chipcontrol); + } + + return (int_val & uart_enab); +} +#endif + +static int +dhdsdio_doiovar(dhd_bus_t *bus, const bcm_iovar_t *vi, uint32 actionid, const char *name, + void *params, int plen, void *arg, int len, int val_size) +{ + int bcmerror = 0; + int32 int_val = 0; + bool bool_val = 0; + + DHD_TRACE(("%s: Enter, action %d name %s params %p plen %d arg %p len %d val_size %d\n", + __FUNCTION__, actionid, name, params, plen, arg, len, val_size)); + + if ((bcmerror = bcm_iovar_lencheck(vi, arg, len, IOV_ISSET(actionid))) != 0) + goto exit; + + if (plen >= (int)sizeof(int_val)) + bcopy(params, &int_val, sizeof(int_val)); + + bool_val = (int_val != 0) ? TRUE : FALSE; + + + /* Some ioctls use the bus */ + dhd_os_sdlock(bus->dhd); + + /* Check if dongle is in reset. If so, only allow DEVRESET iovars */ + if (bus->dhd->dongle_reset && !(actionid == IOV_SVAL(IOV_DEVRESET) || + actionid == IOV_GVAL(IOV_DEVRESET))) { + bcmerror = BCME_NOTREADY; + goto exit; + } + + /* + * Special handling for keepSdioOn: New SDIO Wake-up Mechanism + */ + if ((vi->varid == IOV_KSO) && (IOV_ISSET(actionid))) { + dhdsdio_clk_kso_iovar(bus, bool_val); + goto exit; + } else if ((vi->varid == IOV_DEVSLEEP) && (IOV_ISSET(actionid))) { + { + dhdsdio_clk_devsleep_iovar(bus, bool_val); + if (!SLPAUTO_ENAB(bus) && (bool_val == FALSE) && (bus->ipend)) { + DHD_ERROR(("INT pending in devsleep 1, dpc_sched: %d\n", + bus->dpc_sched)); + if (!bus->dpc_sched) { + bus->dpc_sched = TRUE; + dhd_sched_dpc(bus->dhd); + } + } + } + goto exit; + } + + /* Handle sleep stuff before any clock mucking */ + if (vi->varid == IOV_SLEEP) { + if (IOV_ISSET(actionid)) { + bcmerror = dhdsdio_bussleep(bus, bool_val); + } else { + int_val = (int32)bus->sleeping; + bcopy(&int_val, arg, val_size); + } + goto exit; + } + + /* Request clock to allow SDIO accesses */ + if (!bus->dhd->dongle_reset) { + BUS_WAKE(bus); + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + } + + switch (actionid) { + case IOV_GVAL(IOV_INTR): + int_val = (int32)bus->intr; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_INTR): + bus->intr = bool_val; + bus->intdis = FALSE; + if (bus->dhd->up) { + if (bus->intr) { + DHD_INTR(("%s: enable SDIO device interrupts\n", __FUNCTION__)); + bcmsdh_intr_enable(bus->sdh); + } else { + DHD_INTR(("%s: disable SDIO interrupts\n", __FUNCTION__)); + bcmsdh_intr_disable(bus->sdh); + } + } + break; + + case IOV_GVAL(IOV_POLLRATE): + int_val = (int32)bus->pollrate; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_POLLRATE): + bus->pollrate = (uint)int_val; + bus->poll = (bus->pollrate != 0); + break; + + case IOV_GVAL(IOV_IDLETIME): + int_val = bus->idletime; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_IDLETIME): + if ((int_val < 0) && (int_val != DHD_IDLE_IMMEDIATE)) { + bcmerror = BCME_BADARG; + } else { + bus->idletime = int_val; + } + break; + + case IOV_GVAL(IOV_IDLECLOCK): + int_val = (int32)bus->idleclock; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_IDLECLOCK): + bus->idleclock = int_val; + break; + + case IOV_GVAL(IOV_SD1IDLE): + int_val = (int32)sd1idle; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_SD1IDLE): + sd1idle = bool_val; + break; + + + case IOV_SVAL(IOV_MEMBYTES): + case IOV_GVAL(IOV_MEMBYTES): + { + uint32 address; + uint size, dsize; + uint8 *data; + + bool set = (actionid == IOV_SVAL(IOV_MEMBYTES)); + + ASSERT(plen >= 2*sizeof(int)); + + address = (uint32)int_val; + bcopy((char *)params + sizeof(int_val), &int_val, sizeof(int_val)); + size = (uint)int_val; + + /* Do some validation */ + dsize = set ? plen - (2 * sizeof(int)) : len; + if (dsize < size) { + DHD_ERROR(("%s: error on %s membytes, addr 0x%08x size %d dsize %d\n", + __FUNCTION__, (set ? "set" : "get"), address, size, dsize)); + bcmerror = BCME_BADARG; + break; + } + + DHD_INFO(("%s: Request to %s %d bytes at address 0x%08x\n", __FUNCTION__, + (set ? "write" : "read"), size, address)); + + /* check if CR4 */ + if (si_setcore(bus->sih, ARMCR4_CORE_ID, 0)) { + /* + * If address is start of RAM (i.e. a downloaded image), + * store the reset instruction to be written in 0 + */ + if (set && address == bus->dongle_ram_base) { + bus->resetinstr = *(((uint32*)params) + 2); + } + } else { + /* If we know about SOCRAM, check for a fit */ + if ((bus->orig_ramsize) && + ((address > bus->orig_ramsize) || (address + size > bus->orig_ramsize))) + { + uint8 enable, protect, remap; + si_socdevram(bus->sih, FALSE, &enable, &protect, &remap); + if (!enable || protect) { + DHD_ERROR(("%s: ramsize 0x%08x doesn't have %d bytes at 0x%08x\n", + __FUNCTION__, bus->orig_ramsize, size, address)); + DHD_ERROR(("%s: socram enable %d, protect %d\n", + __FUNCTION__, enable, protect)); + bcmerror = BCME_BADARG; + break; + } + + if (!REMAP_ENAB(bus) && (address >= SOCDEVRAM_ARM_ADDR)) { + uint32 devramsize = si_socdevram_size(bus->sih); + if ((address < SOCDEVRAM_ARM_ADDR) || + (address + size > (SOCDEVRAM_ARM_ADDR + devramsize))) { + DHD_ERROR(("%s: bad address 0x%08x, size 0x%08x\n", + __FUNCTION__, address, size)); + DHD_ERROR(("%s: socram range 0x%08x,size 0x%08x\n", + __FUNCTION__, SOCDEVRAM_ARM_ADDR, devramsize)); + bcmerror = BCME_BADARG; + break; + } + /* move it such that address is real now */ + address -= SOCDEVRAM_ARM_ADDR; + address += SOCDEVRAM_BP_ADDR; + DHD_INFO(("%s: Request to %s %d bytes @ Mapped address 0x%08x\n", + __FUNCTION__, (set ? "write" : "read"), size, address)); + } else if (REMAP_ENAB(bus) && REMAP_ISADDR(bus, address) && remap) { + /* Can not access remap region while devram remap bit is set + * ROM content would be returned in this case + */ + DHD_ERROR(("%s: Need to disable remap for address 0x%08x\n", + __FUNCTION__, address)); + bcmerror = BCME_ERROR; + break; + } + } + } + + /* Generate the actual data pointer */ + data = set ? (uint8*)params + 2 * sizeof(int): (uint8*)arg; + + /* Call to do the transfer */ + bcmerror = dhdsdio_membytes(bus, set, address, data, size); + + break; + } + + case IOV_GVAL(IOV_RAMSIZE): + int_val = (int32)bus->ramsize; + bcopy(&int_val, arg, val_size); + break; + + case IOV_GVAL(IOV_RAMSTART): + int_val = (int32)bus->dongle_ram_base; + bcopy(&int_val, arg, val_size); + break; + + case IOV_GVAL(IOV_SDIOD_DRIVE): + int_val = (int32)dhd_sdiod_drive_strength; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_SDIOD_DRIVE): + dhd_sdiod_drive_strength = int_val; + si_sdiod_drive_strength_init(bus->sih, bus->dhd->osh, dhd_sdiod_drive_strength); + break; + + case IOV_SVAL(IOV_SET_DOWNLOAD_STATE): + bcmerror = dhdsdio_download_state(bus, bool_val); + break; + + case IOV_SVAL(IOV_SOCRAM_STATE): + bcmerror = dhdsdio_download_state(bus, bool_val); + break; + + case IOV_SVAL(IOV_VARS): + bcmerror = dhdsdio_downloadvars(bus, arg, len); + break; + + case IOV_GVAL(IOV_READAHEAD): + int_val = (int32)dhd_readahead; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_READAHEAD): + if (bool_val && !dhd_readahead) + bus->nextlen = 0; + dhd_readahead = bool_val; + break; + + case IOV_GVAL(IOV_SDRXCHAIN): + int_val = (int32)bus->use_rxchain; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_SDRXCHAIN): + if (bool_val && !bus->sd_rxchain) + bcmerror = BCME_UNSUPPORTED; + else + bus->use_rxchain = bool_val; + break; + case IOV_GVAL(IOV_ALIGNCTL): + int_val = (int32)dhd_alignctl; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_ALIGNCTL): + dhd_alignctl = bool_val; + break; + + case IOV_GVAL(IOV_SDALIGN): + int_val = DHD_SDALIGN; + bcopy(&int_val, arg, val_size); + break; + +#ifdef DHD_DEBUG + case IOV_GVAL(IOV_VARS): + if (bus->varsz < (uint)len) + bcopy(bus->vars, arg, bus->varsz); + else + bcmerror = BCME_BUFTOOSHORT; + break; +#endif /* DHD_DEBUG */ + +#ifdef DHD_DEBUG + case IOV_GVAL(IOV_SDREG): + { + sdreg_t *sd_ptr; + uint32 addr, size; + + sd_ptr = (sdreg_t *)params; + + addr = (ulong)bus->regs + sd_ptr->offset; + size = sd_ptr->func; + int_val = (int32)bcmsdh_reg_read(bus->sdh, addr, size); + if (bcmsdh_regfail(bus->sdh)) + bcmerror = BCME_SDIO_ERROR; + bcopy(&int_val, arg, sizeof(int32)); + break; + } + + case IOV_SVAL(IOV_SDREG): + { + sdreg_t *sd_ptr; + uint32 addr, size; + + sd_ptr = (sdreg_t *)params; + + addr = (ulong)bus->regs + sd_ptr->offset; + size = sd_ptr->func; + bcmsdh_reg_write(bus->sdh, addr, size, sd_ptr->value); + if (bcmsdh_regfail(bus->sdh)) + bcmerror = BCME_SDIO_ERROR; + break; + } + + /* Same as above, but offset is not backplane (not SDIO core) */ + case IOV_GVAL(IOV_SBREG): + { + sdreg_t sdreg; + uint32 addr, size; + + bcopy(params, &sdreg, sizeof(sdreg)); + + addr = SI_ENUM_BASE + sdreg.offset; + size = sdreg.func; + int_val = (int32)bcmsdh_reg_read(bus->sdh, addr, size); + if (bcmsdh_regfail(bus->sdh)) + bcmerror = BCME_SDIO_ERROR; + bcopy(&int_val, arg, sizeof(int32)); + break; + } + + case IOV_SVAL(IOV_SBREG): + { + sdreg_t sdreg; + uint32 addr, size; + + bcopy(params, &sdreg, sizeof(sdreg)); + + addr = SI_ENUM_BASE + sdreg.offset; + size = sdreg.func; + bcmsdh_reg_write(bus->sdh, addr, size, sdreg.value); + if (bcmsdh_regfail(bus->sdh)) + bcmerror = BCME_SDIO_ERROR; + break; + } + + case IOV_GVAL(IOV_SDCIS): + { + *(char *)arg = 0; + + bcmstrcat(arg, "\nFunc 0\n"); + bcmsdh_cis_read(bus->sdh, 0x10, (uint8 *)arg + strlen(arg), SBSDIO_CIS_SIZE_LIMIT); + bcmstrcat(arg, "\nFunc 1\n"); + bcmsdh_cis_read(bus->sdh, 0x11, (uint8 *)arg + strlen(arg), SBSDIO_CIS_SIZE_LIMIT); + bcmstrcat(arg, "\nFunc 2\n"); + bcmsdh_cis_read(bus->sdh, 0x12, (uint8 *)arg + strlen(arg), SBSDIO_CIS_SIZE_LIMIT); + break; + } + + case IOV_GVAL(IOV_FORCEEVEN): + int_val = (int32)forcealign; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_FORCEEVEN): + forcealign = bool_val; + break; + + case IOV_GVAL(IOV_TXBOUND): + int_val = (int32)dhd_txbound; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_TXBOUND): + dhd_txbound = (uint)int_val; + break; + + case IOV_GVAL(IOV_RXBOUND): + int_val = (int32)dhd_rxbound; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_RXBOUND): + dhd_rxbound = (uint)int_val; + break; + + case IOV_GVAL(IOV_TXMINMAX): + int_val = (int32)dhd_txminmax; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_TXMINMAX): + dhd_txminmax = (uint)int_val; + break; + + case IOV_GVAL(IOV_SERIALCONS): + int_val = dhd_serialconsole(bus, FALSE, 0, &bcmerror); + if (bcmerror != 0) + break; + + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_SERIALCONS): + dhd_serialconsole(bus, TRUE, bool_val, &bcmerror); + break; + + +#endif /* DHD_DEBUG */ + + +#ifdef SDTEST + case IOV_GVAL(IOV_EXTLOOP): + int_val = (int32)bus->ext_loop; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_EXTLOOP): + bus->ext_loop = bool_val; + break; + + case IOV_GVAL(IOV_PKTGEN): + bcmerror = dhdsdio_pktgen_get(bus, arg); + break; + + case IOV_SVAL(IOV_PKTGEN): + bcmerror = dhdsdio_pktgen_set(bus, arg); + break; +#endif /* SDTEST */ + +#if defined(USE_SDIOFIFO_IOVAR) + case IOV_GVAL(IOV_WATERMARK): + int_val = (int32)watermark; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_WATERMARK): + watermark = (uint)int_val; + watermark = (watermark > SBSDIO_WATERMARK_MASK) ? SBSDIO_WATERMARK_MASK : watermark; + DHD_ERROR(("Setting watermark as 0x%x.\n", watermark)); + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_WATERMARK, (uint8)watermark, NULL); + break; + + case IOV_GVAL(IOV_MESBUSYCTRL): + int_val = (int32)mesbusyctrl; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_MESBUSYCTRL): + mesbusyctrl = (uint)int_val; + mesbusyctrl = (mesbusyctrl > SBSDIO_MESBUSYCTRL_MASK) + ? SBSDIO_MESBUSYCTRL_MASK : mesbusyctrl; + DHD_ERROR(("Setting mesbusyctrl as 0x%x.\n", mesbusyctrl)); + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_MESBUSYCTRL, + ((uint8)mesbusyctrl | 0x80), NULL); + break; +#endif + + + case IOV_GVAL(IOV_DONGLEISOLATION): + int_val = bus->dhd->dongle_isolation; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_DONGLEISOLATION): + bus->dhd->dongle_isolation = bool_val; + break; + + case IOV_SVAL(IOV_DEVRESET): + DHD_TRACE(("%s: Called set IOV_DEVRESET=%d dongle_reset=%d busstate=%d\n", + __FUNCTION__, bool_val, bus->dhd->dongle_reset, + bus->dhd->busstate)); + + ASSERT(bus->dhd->osh); + /* ASSERT(bus->cl_devid); */ + + dhd_bus_devreset(bus->dhd, (uint8)bool_val); + + break; + /* + * softap firmware is updated through module parameter or android private command + */ + + case IOV_GVAL(IOV_DEVRESET): + DHD_TRACE(("%s: Called get IOV_DEVRESET\n", __FUNCTION__)); + + /* Get its status */ + int_val = (bool) bus->dhd->dongle_reset; + bcopy(&int_val, arg, val_size); + + break; + + case IOV_GVAL(IOV_KSO): + int_val = dhdsdio_sleepcsr_get(bus); + bcopy(&int_val, arg, val_size); + break; + + case IOV_GVAL(IOV_DEVCAP): + int_val = dhdsdio_devcap_get(bus); + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_DEVCAP): + dhdsdio_devcap_set(bus, (uint8) int_val); + break; + case IOV_GVAL(IOV_TXGLOMSIZE): + int_val = (int32)bus->txglomsize; + bcopy(&int_val, arg, val_size); + break; + + case IOV_SVAL(IOV_TXGLOMSIZE): + if (int_val > SDPCM_MAXGLOM_SIZE) { + bcmerror = BCME_ERROR; + } else { + bus->txglomsize = (uint)int_val; + } + break; + case IOV_SVAL(IOV_HANGREPORT): + bus->dhd->hang_report = bool_val; + DHD_ERROR(("%s: Set hang_report as %d\n", __FUNCTION__, bus->dhd->hang_report)); + break; + + case IOV_GVAL(IOV_HANGREPORT): + int_val = (int32)bus->dhd->hang_report; + bcopy(&int_val, arg, val_size); + break; + + case IOV_GVAL(IOV_TXINRX_THRES): + int_val = bus->txinrx_thres; + bcopy(&int_val, arg, val_size); + break; + case IOV_SVAL(IOV_TXINRX_THRES): + if (int_val < 0) { + bcmerror = BCME_BADARG; + } else { + bus->txinrx_thres = int_val; + } + break; + + default: + bcmerror = BCME_UNSUPPORTED; + break; + } + +exit: + if ((bus->idletime == DHD_IDLE_IMMEDIATE) && !bus->dpc_sched) { + bus->activity = FALSE; + dhdsdio_clkctl(bus, CLK_NONE, TRUE); + } + + dhd_os_sdunlock(bus->dhd); + + return bcmerror; +} + +static int +dhdsdio_write_vars(dhd_bus_t *bus) +{ + int bcmerror = 0; + uint32 varsize, phys_size; + uint32 varaddr; + uint8 *vbuffer; + uint32 varsizew; +#ifdef DHD_DEBUG + uint8 *nvram_ularray; +#endif /* DHD_DEBUG */ + + /* Even if there are no vars are to be written, we still need to set the ramsize. */ + varsize = bus->varsz ? ROUNDUP(bus->varsz, 4) : 0; + varaddr = (bus->ramsize - 4) - varsize; + + varaddr += bus->dongle_ram_base; + + if (bus->vars) { + if ((bus->sih->buscoretype == SDIOD_CORE_ID) && (bus->sdpcmrev == 7)) { + if (((varaddr & 0x3C) == 0x3C) && (varsize > 4)) { + DHD_ERROR(("PR85623WAR in place\n")); + varsize += 4; + varaddr -= 4; + } + } + + vbuffer = (uint8 *)MALLOC(bus->dhd->osh, varsize); + if (!vbuffer) + return BCME_NOMEM; + + bzero(vbuffer, varsize); + bcopy(bus->vars, vbuffer, bus->varsz); + + /* Write the vars list */ + bcmerror = dhdsdio_membytes(bus, TRUE, varaddr, vbuffer, varsize); +#ifdef DHD_DEBUG + /* Verify NVRAM bytes */ + DHD_INFO(("Compare NVRAM dl & ul; varsize=%d\n", varsize)); + nvram_ularray = (uint8*)MALLOC(bus->dhd->osh, varsize); + if (!nvram_ularray) { + MFREE(bus->dhd->osh, vbuffer, varsize); + return BCME_NOMEM; + } + + /* Upload image to verify downloaded contents. */ + memset(nvram_ularray, 0xaa, varsize); + + /* Read the vars list to temp buffer for comparison */ + bcmerror = dhdsdio_membytes(bus, FALSE, varaddr, nvram_ularray, varsize); + if (bcmerror) { + DHD_ERROR(("%s: error %d on reading %d nvram bytes at 0x%08x\n", + __FUNCTION__, bcmerror, varsize, varaddr)); + } + /* Compare the org NVRAM with the one read from RAM */ + if (memcmp(vbuffer, nvram_ularray, varsize)) { + DHD_ERROR(("%s: Downloaded NVRAM image is corrupted.\n", __FUNCTION__)); + } else + DHD_ERROR(("%s: Download, Upload and compare of NVRAM succeeded.\n", + __FUNCTION__)); + + MFREE(bus->dhd->osh, nvram_ularray, varsize); +#endif /* DHD_DEBUG */ + + MFREE(bus->dhd->osh, vbuffer, varsize); + } + + phys_size = REMAP_ENAB(bus) ? bus->ramsize : bus->orig_ramsize; + + phys_size += bus->dongle_ram_base; + + /* adjust to the user specified RAM */ + DHD_INFO(("Physical memory size: %d, usable memory size: %d\n", + phys_size, bus->ramsize)); + DHD_INFO(("Vars are at %d, orig varsize is %d\n", + varaddr, varsize)); + varsize = ((phys_size - 4) - varaddr); + + /* + * Determine the length token: + * Varsize, converted to words, in lower 16-bits, checksum in upper 16-bits. + */ + if (bcmerror) { + varsizew = 0; + } else { + varsizew = varsize / 4; + varsizew = (~varsizew << 16) | (varsizew & 0x0000FFFF); + varsizew = htol32(varsizew); + } + + DHD_INFO(("New varsize is %d, length token=0x%08x\n", varsize, varsizew)); + + /* Write the length token to the last word */ + bcmerror = dhdsdio_membytes(bus, TRUE, (phys_size - 4), + (uint8*)&varsizew, 4); + + return bcmerror; +} + +static int +dhdsdio_download_state(dhd_bus_t *bus, bool enter) +{ + uint retries; + int bcmerror = 0; + int foundcr4 = 0; + + if (!bus->sih) + return BCME_ERROR; + /* To enter download state, disable ARM and reset SOCRAM. + * To exit download state, simply reset ARM (default is RAM boot). + */ + if (enter) { + bus->alp_only = TRUE; + + if (!(si_setcore(bus->sih, ARM7S_CORE_ID, 0)) && + !(si_setcore(bus->sih, ARMCM3_CORE_ID, 0))) { + if (si_setcore(bus->sih, ARMCR4_CORE_ID, 0)) { + foundcr4 = 1; + } else { + DHD_ERROR(("%s: Failed to find ARM core!\n", __FUNCTION__)); + bcmerror = BCME_ERROR; + goto fail; + } + } + + if (!foundcr4) { + si_core_disable(bus->sih, 0); + if (bcmsdh_regfail(bus->sdh)) { + bcmerror = BCME_SDIO_ERROR; + goto fail; + } + + if (!(si_setcore(bus->sih, SOCRAM_CORE_ID, 0))) { + DHD_ERROR(("%s: Failed to find SOCRAM core!\n", __FUNCTION__)); + bcmerror = BCME_ERROR; + goto fail; + } + + si_core_reset(bus->sih, 0, 0); + if (bcmsdh_regfail(bus->sdh)) { + DHD_ERROR(("%s: Failure trying reset SOCRAM core?\n", + __FUNCTION__)); + bcmerror = BCME_SDIO_ERROR; + goto fail; + } + + /* Disable remap for download */ + if (REMAP_ENAB(bus) && si_socdevram_remap_isenb(bus->sih)) + dhdsdio_devram_remap(bus, FALSE); + + if (CHIPID(bus->sih->chip) == BCM43430_CHIP_ID) { + /* Disabling Remap for SRAM_3 */ + si_socram_set_bankpda(bus->sih, 0x3, 0x0); + } + + /* Clear the top bit of memory */ + if (bus->ramsize) { + uint32 zeros = 0; + if (dhdsdio_membytes(bus, TRUE, bus->ramsize - 4, + (uint8*)&zeros, 4) < 0) { + bcmerror = BCME_SDIO_ERROR; + goto fail; + } + } + } else { + /* For CR4, + * Halt ARM + * Remove ARM reset + * Read RAM base address [0x18_0000] + * [next] Download firmware + * [done at else] Populate the reset vector + * [done at else] Remove ARM halt + */ + /* Halt ARM & remove reset */ + si_core_reset(bus->sih, SICF_CPUHALT, SICF_CPUHALT); + } + } else { + if (!si_setcore(bus->sih, ARMCR4_CORE_ID, 0)) { + if (!(si_setcore(bus->sih, SOCRAM_CORE_ID, 0))) { + DHD_ERROR(("%s: Failed to find SOCRAM core!\n", __FUNCTION__)); + bcmerror = BCME_ERROR; + goto fail; + } + + if (!si_iscoreup(bus->sih)) { + DHD_ERROR(("%s: SOCRAM core is down after reset?\n", __FUNCTION__)); + bcmerror = BCME_ERROR; + goto fail; + } + + if ((bcmerror = dhdsdio_write_vars(bus))) { + DHD_ERROR(("%s: could not write vars to RAM\n", __FUNCTION__)); + goto fail; + } + + /* Enable remap before ARM reset but after vars. + * No backplane access in remap mode + */ + if (REMAP_ENAB(bus) && !si_socdevram_remap_isenb(bus->sih)) + dhdsdio_devram_remap(bus, TRUE); + + if (!si_setcore(bus->sih, PCMCIA_CORE_ID, 0) && + !si_setcore(bus->sih, SDIOD_CORE_ID, 0)) { + DHD_ERROR(("%s: Can't change back to SDIO core?\n", __FUNCTION__)); + bcmerror = BCME_ERROR; + goto fail; + } + W_SDREG(0xFFFFFFFF, &bus->regs->intstatus, retries); + + + if (!(si_setcore(bus->sih, ARM7S_CORE_ID, 0)) && + !(si_setcore(bus->sih, ARMCM3_CORE_ID, 0))) { + DHD_ERROR(("%s: Failed to find ARM core!\n", __FUNCTION__)); + bcmerror = BCME_ERROR; + goto fail; + } + } else { + /* cr4 has no socram, but tcm's */ + /* write vars */ + if ((bcmerror = dhdsdio_write_vars(bus))) { + DHD_ERROR(("%s: could not write vars to RAM\n", __FUNCTION__)); + goto fail; + } + + if (!si_setcore(bus->sih, PCMCIA_CORE_ID, 0) && + !si_setcore(bus->sih, SDIOD_CORE_ID, 0)) { + DHD_ERROR(("%s: Can't change back to SDIO core?\n", __FUNCTION__)); + bcmerror = BCME_ERROR; + goto fail; + } + W_SDREG(0xFFFFFFFF, &bus->regs->intstatus, retries); + + /* switch back to arm core again */ + if (!(si_setcore(bus->sih, ARMCR4_CORE_ID, 0))) { + DHD_ERROR(("%s: Failed to find ARM CR4 core!\n", __FUNCTION__)); + bcmerror = BCME_ERROR; + goto fail; + } + /* write address 0 with reset instruction */ + bcmerror = dhdsdio_membytes(bus, TRUE, 0, + (uint8 *)&bus->resetinstr, sizeof(bus->resetinstr)); + + /* now remove reset and halt and continue to run CR4 */ + } + + si_core_reset(bus->sih, 0, 0); + if (bcmsdh_regfail(bus->sdh)) { + DHD_ERROR(("%s: Failure trying to reset ARM core?\n", __FUNCTION__)); + bcmerror = BCME_SDIO_ERROR; + goto fail; + } + + /* Allow HT Clock now that the ARM is running. */ + bus->alp_only = FALSE; + + bus->dhd->busstate = DHD_BUS_LOAD; + } + +fail: + /* Always return to SDIOD core */ + if (!si_setcore(bus->sih, PCMCIA_CORE_ID, 0)) + si_setcore(bus->sih, SDIOD_CORE_ID, 0); + + return bcmerror; +} + +int +dhd_bus_iovar_op(dhd_pub_t *dhdp, const char *name, + void *params, int plen, void *arg, int len, bool set) +{ + dhd_bus_t *bus = dhdp->bus; + const bcm_iovar_t *vi = NULL; + int bcmerror = 0; + int val_size; + uint32 actionid; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + ASSERT(name); + ASSERT(len >= 0); + + /* Get MUST have return space */ + ASSERT(set || (arg && len)); + + /* Set does NOT take qualifiers */ + ASSERT(!set || (!params && !plen)); + + /* Look up var locally; if not found pass to host driver */ + if ((vi = bcm_iovar_lookup(dhdsdio_iovars, name)) == NULL) { + dhd_os_sdlock(bus->dhd); + + BUS_WAKE(bus); + + /* Turn on clock in case SD command needs backplane */ + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + + bcmerror = bcmsdh_iovar_op(bus->sdh, name, params, plen, arg, len, set); + + /* Check for bus configuration changes of interest */ + + /* If it was divisor change, read the new one */ + if (set && strcmp(name, "sd_divisor") == 0) { + if (bcmsdh_iovar_op(bus->sdh, "sd_divisor", NULL, 0, + &bus->sd_divisor, sizeof(int32), FALSE) != BCME_OK) { + bus->sd_divisor = -1; + DHD_ERROR(("%s: fail on %s get\n", __FUNCTION__, name)); + } else { + DHD_INFO(("%s: noted %s update, value now %d\n", + __FUNCTION__, name, bus->sd_divisor)); + } + } + /* If it was a mode change, read the new one */ + if (set && strcmp(name, "sd_mode") == 0) { + if (bcmsdh_iovar_op(bus->sdh, "sd_mode", NULL, 0, + &bus->sd_mode, sizeof(int32), FALSE) != BCME_OK) { + bus->sd_mode = -1; + DHD_ERROR(("%s: fail on %s get\n", __FUNCTION__, name)); + } else { + DHD_INFO(("%s: noted %s update, value now %d\n", + __FUNCTION__, name, bus->sd_mode)); + } + } + /* Similar check for blocksize change */ + if (set && strcmp(name, "sd_blocksize") == 0) { + int32 fnum = 2; + if (bcmsdh_iovar_op(bus->sdh, "sd_blocksize", &fnum, sizeof(int32), + &bus->blocksize, sizeof(int32), FALSE) != BCME_OK) { + bus->blocksize = 0; + DHD_ERROR(("%s: fail on %s get\n", __FUNCTION__, "sd_blocksize")); + } else { + DHD_INFO(("%s: noted %s update, value now %d\n", + __FUNCTION__, "sd_blocksize", bus->blocksize)); + + dhdsdio_tune_fifoparam(bus); + } + } + bus->roundup = MIN(max_roundup, bus->blocksize); + + if ((bus->idletime == DHD_IDLE_IMMEDIATE) && !bus->dpc_sched) { + bus->activity = FALSE; + dhdsdio_clkctl(bus, CLK_NONE, TRUE); + } + + dhd_os_sdunlock(bus->dhd); + goto exit; + } + + DHD_CTL(("%s: %s %s, len %d plen %d\n", __FUNCTION__, + name, (set ? "set" : "get"), len, plen)); + + /* set up 'params' pointer in case this is a set command so that + * the convenience int and bool code can be common to set and get + */ + if (params == NULL) { + params = arg; + plen = len; + } + + if (vi->type == IOVT_VOID) + val_size = 0; + else if (vi->type == IOVT_BUFFER) + val_size = len; + else + /* all other types are integer sized */ + val_size = sizeof(int); + + actionid = set ? IOV_SVAL(vi->varid) : IOV_GVAL(vi->varid); + bcmerror = dhdsdio_doiovar(bus, vi, actionid, name, params, plen, arg, len, val_size); + +exit: + return bcmerror; +} + +void +dhd_bus_stop(struct dhd_bus *bus, bool enforce_mutex) +{ + osl_t *osh; + uint32 local_hostintmask; + uint8 saveclk; + uint retries; + int err; + bool wlfc_enabled = FALSE; + + if (!bus->dhd) + return; + + osh = bus->dhd->osh; + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + bcmsdh_waitlockfree(bus->sdh); + + if (enforce_mutex) + dhd_os_sdlock(bus->dhd); + + if ((bus->dhd->busstate == DHD_BUS_DOWN) || bus->dhd->hang_was_sent) { + /* if Firmware already hangs disbale any interrupt */ + bus->dhd->busstate = DHD_BUS_DOWN; + bus->hostintmask = 0; + bcmsdh_intr_disable(bus->sdh); + } else { + + BUS_WAKE(bus); + + /* Change our idea of bus state */ + bus->dhd->busstate = DHD_BUS_DOWN; + + if (KSO_ENAB(bus)) { + + /* Enable clock for device interrupts */ + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + + /* Disable and clear interrupts at the chip level also */ + W_SDREG(0, &bus->regs->hostintmask, retries); + local_hostintmask = bus->hostintmask; + bus->hostintmask = 0; + + /* Force clocks on backplane to be sure F2 interrupt propagates */ + saveclk = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, &err); + if (!err) { + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); + } + if (err) { + DHD_ERROR(("%s: Failed to force clock for F2: err %d\n", + __FUNCTION__, err)); + } + + /* Turn off the bus (F2), free any pending packets */ + DHD_INTR(("%s: disable SDIO interrupts\n", __FUNCTION__)); + bcmsdh_intr_disable(bus->sdh); + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_IOEN, SDIO_FUNC_ENABLE_1, NULL); + + /* Clear any pending interrupts now that F2 is disabled */ + W_SDREG(local_hostintmask, &bus->regs->intstatus, retries); + } + + /* Turn off the backplane clock (only) */ + dhdsdio_clkctl(bus, CLK_SDONLY, FALSE); + } + +#ifdef PROP_TXSTATUS + wlfc_enabled = (dhd_wlfc_cleanup_txq(bus->dhd, NULL, 0) != WLFC_UNSUPPORTED); +#endif + if (!wlfc_enabled) { +#ifdef DHDTCPACK_SUPPRESS + /* Clean tcp_ack_info_tbl in order to prevent access to flushed pkt, + * when there is a newly coming packet from network stack. + */ + dhd_tcpack_info_tbl_clean(bus->dhd); +#endif /* DHDTCPACK_SUPPRESS */ + /* Clear the data packet queues */ + pktq_flush(osh, &bus->txq, TRUE, NULL, 0); + } + + /* Clear any held glomming stuff */ + if (bus->glomd) + PKTFREE(osh, bus->glomd, FALSE); + + if (bus->glom) + PKTFREE(osh, bus->glom, FALSE); + + bus->glom = bus->glomd = NULL; + + /* Clear rx control and wake any waiters */ + bus->rxlen = 0; + dhd_os_ioctl_resp_wake(bus->dhd); + + /* Reset some F2 state stuff */ + bus->rxskip = FALSE; + bus->tx_seq = bus->rx_seq = 0; + + bus->tx_max = 4; + + if (enforce_mutex) + dhd_os_sdunlock(bus->dhd); +} + +#if defined(BCMSDIOH_TXGLOM) && defined(BCMSDIOH_STD) +extern uint sd_txglom; +#endif +void +dhd_txglom_enable(dhd_pub_t *dhdp, bool enable) +{ + /* can't enable host txglom by default, some platforms have no + * (or crappy) ADMA support and txglom will cause kernel assertions (e.g. + * panda board) + */ + dhd_bus_t *bus = dhdp->bus; +#ifdef BCMSDIOH_TXGLOM + char buf[256]; + uint32 rxglom; + int32 ret; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + +#ifdef BCMSDIOH_STD + if (enable) + enable = sd_txglom; +#endif /* BCMSDIOH_STD */ + + if (enable) { + rxglom = 1; + memset(buf, 0, sizeof(buf)); + bcm_mkiovar("bus:rxglom", (void *)&rxglom, 4, buf, sizeof(buf)); + ret = dhd_wl_ioctl_cmd(dhdp, WLC_SET_VAR, buf, sizeof(buf), TRUE, 0); + if (ret >= 0) + bus->txglom_enable = TRUE; + else { +#ifdef BCMSDIOH_STD + sd_txglom = 0; +#endif /* BCMSDIOH_STD */ + bus->txglom_enable = FALSE; + } + } else +#endif /* BCMSDIOH_TXGLOM */ + bus->txglom_enable = FALSE; +} + +int +dhd_bus_init(dhd_pub_t *dhdp, bool enforce_mutex) +{ + dhd_bus_t *bus = dhdp->bus; + dhd_timeout_t tmo; + uint retries = 0; + uint8 ready, enable; + int err, ret = 0; + uint8 saveclk; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + ASSERT(bus->dhd); + if (!bus->dhd) + return 0; + + if (enforce_mutex) + dhd_os_sdlock(bus->dhd); + + /* Make sure backplane clock is on, needed to generate F2 interrupt */ + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + if (bus->clkstate != CLK_AVAIL) { + DHD_ERROR(("%s: clock state is wrong. state = %d\n", __FUNCTION__, bus->clkstate)); + ret = -1; + goto exit; + } + + + /* Force clocks on backplane to be sure F2 interrupt propagates */ + saveclk = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, &err); + if (!err) { + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); + } + if (err) { + DHD_ERROR(("%s: Failed to force clock for F2: err %d\n", __FUNCTION__, err)); + ret = -1; + goto exit; + } + + /* Enable function 2 (frame transfers) */ + W_SDREG((SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT), + &bus->regs->tosbmailboxdata, retries); + enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2); + + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_IOEN, enable, NULL); + + /* Give the dongle some time to do its thing and set IOR2 */ + dhd_timeout_start(&tmo, DHD_WAIT_F2RDY * 1000); + + ready = 0; + while (ready != enable && !dhd_timeout_expired(&tmo)) + ready = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_IORDY, NULL); + + DHD_ERROR(("%s: enable 0x%02x, ready 0x%02x (waited %uus)\n", + __FUNCTION__, enable, ready, tmo.elapsed)); + + + /* If F2 successfully enabled, set core and enable interrupts */ + if (ready == enable) { + /* Make sure we're talking to the core. */ + if (!(bus->regs = si_setcore(bus->sih, PCMCIA_CORE_ID, 0))) + bus->regs = si_setcore(bus->sih, SDIOD_CORE_ID, 0); + ASSERT(bus->regs != NULL); + + /* Set up the interrupt mask and enable interrupts */ + bus->hostintmask = HOSTINTMASK; + /* corerev 4 could use the newer interrupt logic to detect the frames */ + if ((bus->sih->buscoretype == SDIOD_CORE_ID) && (bus->sdpcmrev == 4) && + (bus->rxint_mode != SDIO_DEVICE_HMB_RXINT)) { + bus->hostintmask &= ~I_HMB_FRAME_IND; + bus->hostintmask |= I_XMTDATA_AVAIL; + } + W_SDREG(bus->hostintmask, &bus->regs->hostintmask, retries); + + if (bus->sih->buscorerev < 15) { + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_WATERMARK, + (uint8)watermark, &err); + } + + /* Set bus state according to enable result */ + dhdp->busstate = DHD_BUS_DATA; + + /* bcmsdh_intr_unmask(bus->sdh); */ + + bus->intdis = FALSE; + if (bus->intr) { + DHD_INTR(("%s: enable SDIO device interrupts\n", __FUNCTION__)); + bcmsdh_intr_enable(bus->sdh); + } else { + DHD_INTR(("%s: disable SDIO interrupts\n", __FUNCTION__)); + bcmsdh_intr_disable(bus->sdh); + } + + } + + + else { + /* Disable F2 again */ + enable = SDIO_FUNC_ENABLE_1; + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_IOEN, enable, NULL); + } + + if (dhdsdio_sr_cap(bus)) { + dhdsdio_sr_init(bus); + /* Masking the chip active interrupt permanantly */ + bus->hostintmask &= ~I_CHIPACTIVE; + W_SDREG(bus->hostintmask, &bus->regs->hostintmask, retries); + DHD_INFO(("%s: disable I_CHIPACTIVE in hostintmask[0x%08x]\n", + __FUNCTION__, bus->hostintmask)); + } + else + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, + SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err); + + /* If we didn't come up, turn off backplane clock */ + if (dhdp->busstate != DHD_BUS_DATA) + dhdsdio_clkctl(bus, CLK_NONE, FALSE); + + +exit: + if (enforce_mutex) + dhd_os_sdunlock(bus->dhd); + + return ret; +} + +static void +dhdsdio_rxfail(dhd_bus_t *bus, bool abort, bool rtx) +{ + bcmsdh_info_t *sdh = bus->sdh; + sdpcmd_regs_t *regs = bus->regs; + uint retries = 0; + uint16 lastrbc; + uint8 hi, lo; + int err; + + DHD_ERROR(("%s: %sterminate frame%s\n", __FUNCTION__, + (abort ? "abort command, " : ""), (rtx ? ", send NAK" : ""))); + + if (!KSO_ENAB(bus)) { + DHD_ERROR(("%s: Device asleep\n", __FUNCTION__)); + return; + } + + if (abort) { + bcmsdh_abort(sdh, SDIO_FUNC_2); + } + + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM, &err); + if (err) { + DHD_ERROR(("%s: SBSDIO_FUNC1_FRAMECTRL cmd err\n", __FUNCTION__)); + goto fail; + } + bus->f1regdata++; + + /* Wait until the packet has been flushed (device/FIFO stable) */ + for (lastrbc = retries = 0xffff; retries > 0; retries--) { + hi = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_RFRAMEBCHI, NULL); + lo = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_RFRAMEBCLO, &err); + if (err) { + DHD_ERROR(("%s: SBSDIO_FUNC1_RFAMEBCLO cmd err\n", __FUNCTION__)); + goto fail; + } + + bus->f1regdata += 2; + + if ((hi == 0) && (lo == 0)) + break; + + if ((hi > (lastrbc >> 8)) && (lo > (lastrbc & 0x00ff))) { + DHD_ERROR(("%s: count growing: last 0x%04x now 0x%04x\n", + __FUNCTION__, lastrbc, ((hi << 8) + lo))); + } + lastrbc = (hi << 8) + lo; + } + + if (!retries) { + DHD_ERROR(("%s: count never zeroed: last 0x%04x\n", __FUNCTION__, lastrbc)); + } else { + DHD_INFO(("%s: flush took %d iterations\n", __FUNCTION__, (0xffff - retries))); + } + + if (rtx) { + bus->rxrtx++; + W_SDREG(SMB_NAK, ®s->tosbmailbox, retries); + bus->f1regdata++; + if (retries <= retry_limit) { + bus->rxskip = TRUE; + } + } + + /* Clear partial in any case */ + bus->nextlen = 0; + +fail: + /* If we can't reach the device, signal failure */ + if (err || bcmsdh_regfail(sdh)) + bus->dhd->busstate = DHD_BUS_DOWN; +} + +static void +dhdsdio_read_control(dhd_bus_t *bus, uint8 *hdr, uint len, uint doff) +{ + bcmsdh_info_t *sdh = bus->sdh; + uint rdlen, pad; + + int sdret; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + /* Control data already received in aligned rxctl */ + if ((bus->bus == SPI_BUS) && (!bus->usebufpool)) + goto gotpkt; + + ASSERT(bus->rxbuf); + /* Set rxctl for frame (w/optional alignment) */ + bus->rxctl = bus->rxbuf; + if (dhd_alignctl) { + bus->rxctl += firstread; + if ((pad = ((uintptr)bus->rxctl % DHD_SDALIGN))) + bus->rxctl += (DHD_SDALIGN - pad); + bus->rxctl -= firstread; + } + ASSERT(bus->rxctl >= bus->rxbuf); + + /* Copy the already-read portion over */ + bcopy(hdr, bus->rxctl, firstread); + if (len <= firstread) + goto gotpkt; + + /* Copy the full data pkt in gSPI case and process ioctl. */ + if (bus->bus == SPI_BUS) { + bcopy(hdr, bus->rxctl, len); + goto gotpkt; + } + + /* Raise rdlen to next SDIO block to avoid tail command */ + rdlen = len - firstread; + if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) { + pad = bus->blocksize - (rdlen % bus->blocksize); + if ((pad <= bus->roundup) && (pad < bus->blocksize) && + ((len + pad) < bus->dhd->maxctl)) + rdlen += pad; + } else if (rdlen % DHD_SDALIGN) { + rdlen += DHD_SDALIGN - (rdlen % DHD_SDALIGN); + } + + /* Satisfy length-alignment requirements */ + if (forcealign && (rdlen & (ALIGNMENT - 1))) + rdlen = ROUNDUP(rdlen, ALIGNMENT); + + /* Drop if the read is too big or it exceeds our maximum */ + if ((rdlen + firstread) > bus->dhd->maxctl) { + DHD_ERROR(("%s: %d-byte control read exceeds %d-byte buffer\n", + __FUNCTION__, rdlen, bus->dhd->maxctl)); + bus->dhd->rx_errors++; + dhdsdio_rxfail(bus, FALSE, FALSE); + goto done; + } + + if ((len - doff) > bus->dhd->maxctl) { + DHD_ERROR(("%s: %d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n", + __FUNCTION__, len, (len - doff), bus->dhd->maxctl)); + bus->dhd->rx_errors++; bus->rx_toolong++; + dhdsdio_rxfail(bus, FALSE, FALSE); + goto done; + } + + + /* Read remainder of frame body into the rxctl buffer */ + sdret = dhd_bcmsdh_recv_buf(bus, bcmsdh_cur_sbwad(sdh), SDIO_FUNC_2, F2SYNC, + (bus->rxctl + firstread), rdlen, NULL, NULL, NULL); + bus->f2rxdata++; + ASSERT(sdret != BCME_PENDING); + + /* Control frame failures need retransmission */ + if (sdret < 0) { + DHD_ERROR(("%s: read %d control bytes failed: %d\n", __FUNCTION__, rdlen, sdret)); + bus->rxc_errors++; /* dhd.rx_ctlerrs is higher level */ + dhdsdio_rxfail(bus, TRUE, TRUE); + goto done; + } + +gotpkt: + +#ifdef DHD_DEBUG + if (DHD_BYTES_ON() && DHD_CTL_ON()) { + prhex("RxCtrl", bus->rxctl, len); + } +#endif + + /* Point to valid data and indicate its length */ + bus->rxctl += doff; + bus->rxlen = len - doff; + +done: + /* Awake any waiters */ + dhd_os_ioctl_resp_wake(bus->dhd); +} +int +dhd_process_pkt_reorder_info(dhd_pub_t *dhd, uchar *reorder_info_buf, uint reorder_info_len, + void **pkt, uint32 *pkt_count); + +static uint8 +dhdsdio_rxglom(dhd_bus_t *bus, uint8 rxseq) +{ + uint16 dlen, totlen; + uint8 *dptr, num = 0; + + uint16 sublen, check; + void *pfirst, *plast, *pnext; + void * list_tail[DHD_MAX_IFS] = { NULL }; + void * list_head[DHD_MAX_IFS] = { NULL }; + uint8 idx; + osl_t *osh = bus->dhd->osh; + + int errcode; + uint8 chan, seq, doff, sfdoff; + uint8 txmax; + uchar reorder_info_buf[WLHOST_REORDERDATA_TOTLEN]; + uint reorder_info_len; + + int ifidx = 0; + bool usechain = bus->use_rxchain; + + /* If packets, issue read(s) and send up packet chain */ + /* Return sequence numbers consumed? */ + + DHD_TRACE(("dhdsdio_rxglom: start: glomd %p glom %p\n", bus->glomd, bus->glom)); + + /* If there's a descriptor, generate the packet chain */ + if (bus->glomd) { + dhd_os_sdlock_rxq(bus->dhd); + + pfirst = plast = pnext = NULL; + dlen = (uint16)PKTLEN(osh, bus->glomd); + dptr = PKTDATA(osh, bus->glomd); + if (!dlen || (dlen & 1)) { + DHD_ERROR(("%s: bad glomd len (%d), ignore descriptor\n", + __FUNCTION__, dlen)); + dlen = 0; + } + + for (totlen = num = 0; dlen; num++) { + /* Get (and move past) next length */ + sublen = ltoh16_ua(dptr); + dlen -= sizeof(uint16); + dptr += sizeof(uint16); + if ((sublen < SDPCM_HDRLEN) || + ((num == 0) && (sublen < (2 * SDPCM_HDRLEN)))) { + DHD_ERROR(("%s: descriptor len %d bad: %d\n", + __FUNCTION__, num, sublen)); + pnext = NULL; + break; + } + if (sublen % DHD_SDALIGN) { + DHD_ERROR(("%s: sublen %d not a multiple of %d\n", + __FUNCTION__, sublen, DHD_SDALIGN)); + usechain = FALSE; + } + totlen += sublen; + + /* For last frame, adjust read len so total is a block multiple */ + if (!dlen) { + sublen += (ROUNDUP(totlen, bus->blocksize) - totlen); + totlen = ROUNDUP(totlen, bus->blocksize); + } + + /* Allocate/chain packet for next subframe */ + if ((pnext = PKTGET(osh, sublen + DHD_SDALIGN, FALSE)) == NULL) { + DHD_ERROR(("%s: PKTGET failed, num %d len %d\n", + __FUNCTION__, num, sublen)); + break; + } + ASSERT(!PKTLINK(pnext)); + if (!pfirst) { + ASSERT(!plast); + pfirst = plast = pnext; + } else { + ASSERT(plast); + PKTSETNEXT(osh, plast, pnext); + plast = pnext; + } + + /* Adhere to start alignment requirements */ + PKTALIGN(osh, pnext, sublen, DHD_SDALIGN); + } + + /* If all allocations succeeded, save packet chain in bus structure */ + if (pnext) { + DHD_GLOM(("%s: allocated %d-byte packet chain for %d subframes\n", + __FUNCTION__, totlen, num)); + if (DHD_GLOM_ON() && bus->nextlen) { + if (totlen != bus->nextlen) { + DHD_GLOM(("%s: glomdesc mismatch: nextlen %d glomdesc %d " + "rxseq %d\n", __FUNCTION__, bus->nextlen, + totlen, rxseq)); + } + } + bus->glom = pfirst; + pfirst = pnext = NULL; + } else { + if (pfirst) + PKTFREE(osh, pfirst, FALSE); + bus->glom = NULL; + num = 0; + } + + /* Done with descriptor packet */ + PKTFREE(osh, bus->glomd, FALSE); + bus->glomd = NULL; + bus->nextlen = 0; + + dhd_os_sdunlock_rxq(bus->dhd); + } + + /* Ok -- either we just generated a packet chain, or had one from before */ + if (bus->glom) { + if (DHD_GLOM_ON()) { + DHD_GLOM(("%s: attempt superframe read, packet chain:\n", __FUNCTION__)); + for (pnext = bus->glom; pnext; pnext = PKTNEXT(osh, pnext)) { + DHD_GLOM((" %p: %p len 0x%04x (%d)\n", + pnext, (uint8*)PKTDATA(osh, pnext), + PKTLEN(osh, pnext), PKTLEN(osh, pnext))); + } + } + + pfirst = bus->glom; + dlen = (uint16)pkttotlen(osh, pfirst); + + /* Do an SDIO read for the superframe. Configurable iovar to + * read directly into the chained packet, or allocate a large + * packet and and copy into the chain. + */ + if (usechain) { + errcode = dhd_bcmsdh_recv_buf(bus, + bcmsdh_cur_sbwad(bus->sdh), SDIO_FUNC_2, + F2SYNC, (uint8*)PKTDATA(osh, pfirst), + dlen, pfirst, NULL, NULL); + } else if (bus->dataptr) { + errcode = dhd_bcmsdh_recv_buf(bus, + bcmsdh_cur_sbwad(bus->sdh), SDIO_FUNC_2, + F2SYNC, bus->dataptr, + dlen, NULL, NULL, NULL); + sublen = (uint16)pktfrombuf(osh, pfirst, 0, dlen, bus->dataptr); + if (sublen != dlen) { + DHD_ERROR(("%s: FAILED TO COPY, dlen %d sublen %d\n", + __FUNCTION__, dlen, sublen)); + errcode = -1; + } + pnext = NULL; + } else { + DHD_ERROR(("COULDN'T ALLOC %d-BYTE GLOM, FORCE FAILURE\n", dlen)); + errcode = -1; + } + bus->f2rxdata++; + ASSERT(errcode != BCME_PENDING); + + /* On failure, kill the superframe, allow a couple retries */ + if (errcode < 0) { + DHD_ERROR(("%s: glom read of %d bytes failed: %d\n", + __FUNCTION__, dlen, errcode)); + bus->dhd->rx_errors++; + + if (bus->glomerr++ < 3) { + dhdsdio_rxfail(bus, TRUE, TRUE); + } else { + bus->glomerr = 0; + dhdsdio_rxfail(bus, TRUE, FALSE); + dhd_os_sdlock_rxq(bus->dhd); + PKTFREE(osh, bus->glom, FALSE); + dhd_os_sdunlock_rxq(bus->dhd); + bus->rxglomfail++; + bus->glom = NULL; + } + return 0; + } + +#ifdef DHD_DEBUG + if (DHD_GLOM_ON()) { + prhex("SUPERFRAME", PKTDATA(osh, pfirst), + MIN(PKTLEN(osh, pfirst), 48)); + } +#endif + + + /* Validate the superframe header */ + dptr = (uint8 *)PKTDATA(osh, pfirst); + sublen = ltoh16_ua(dptr); + check = ltoh16_ua(dptr + sizeof(uint16)); + + chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]); + seq = SDPCM_PACKET_SEQUENCE(&dptr[SDPCM_FRAMETAG_LEN]); + bus->nextlen = dptr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET]; + if ((bus->nextlen << 4) > MAX_RX_DATASZ) { + DHD_INFO(("%s: got frame w/nextlen too large (%d) seq %d\n", + __FUNCTION__, bus->nextlen, seq)); + bus->nextlen = 0; + } + doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]); + txmax = SDPCM_WINDOW_VALUE(&dptr[SDPCM_FRAMETAG_LEN]); + + errcode = 0; + if ((uint16)~(sublen^check)) { + DHD_ERROR(("%s (superframe): HW hdr error: len/check 0x%04x/0x%04x\n", + __FUNCTION__, sublen, check)); + errcode = -1; + } else if (ROUNDUP(sublen, bus->blocksize) != dlen) { + DHD_ERROR(("%s (superframe): len 0x%04x, rounded 0x%04x, expect 0x%04x\n", + __FUNCTION__, sublen, ROUNDUP(sublen, bus->blocksize), dlen)); + errcode = -1; + } else if (SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]) != SDPCM_GLOM_CHANNEL) { + DHD_ERROR(("%s (superframe): bad channel %d\n", __FUNCTION__, + SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]))); + errcode = -1; + } else if (SDPCM_GLOMDESC(&dptr[SDPCM_FRAMETAG_LEN])) { + DHD_ERROR(("%s (superframe): got second descriptor?\n", __FUNCTION__)); + errcode = -1; + } else if ((doff < SDPCM_HDRLEN) || + (doff > (PKTLEN(osh, pfirst) - SDPCM_HDRLEN))) { + DHD_ERROR(("%s (superframe): Bad data offset %d: HW %d pkt %d min %d\n", + __FUNCTION__, doff, sublen, PKTLEN(osh, pfirst), + SDPCM_HDRLEN)); + errcode = -1; + } + + /* Check sequence number of superframe SW header */ + if (rxseq != seq) { + DHD_INFO(("%s: (superframe) rx_seq %d, expected %d\n", + __FUNCTION__, seq, rxseq)); + bus->rx_badseq++; + rxseq = seq; + } + + /* Check window for sanity */ + if ((uint8)(txmax - bus->tx_seq) > 0x70) { + DHD_ERROR(("%s: got unlikely tx max %d with tx_seq %d\n", + __FUNCTION__, txmax, bus->tx_seq)); + txmax = bus->tx_max; + } + bus->tx_max = txmax; + + /* Remove superframe header, remember offset */ + PKTPULL(osh, pfirst, doff); + sfdoff = doff; + + /* Validate all the subframe headers */ + for (num = 0, pnext = pfirst; pnext && !errcode; + num++, pnext = PKTNEXT(osh, pnext)) { + dptr = (uint8 *)PKTDATA(osh, pnext); + dlen = (uint16)PKTLEN(osh, pnext); + sublen = ltoh16_ua(dptr); + check = ltoh16_ua(dptr + sizeof(uint16)); + chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]); + doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]); +#ifdef DHD_DEBUG + if (DHD_GLOM_ON()) { + prhex("subframe", dptr, 32); + } +#endif + + if ((uint16)~(sublen^check)) { + DHD_ERROR(("%s (subframe %d): HW hdr error: " + "len/check 0x%04x/0x%04x\n", + __FUNCTION__, num, sublen, check)); + errcode = -1; + } else if ((sublen > dlen) || (sublen < SDPCM_HDRLEN)) { + DHD_ERROR(("%s (subframe %d): length mismatch: " + "len 0x%04x, expect 0x%04x\n", + __FUNCTION__, num, sublen, dlen)); + errcode = -1; + } else if ((chan != SDPCM_DATA_CHANNEL) && + (chan != SDPCM_EVENT_CHANNEL)) { + DHD_ERROR(("%s (subframe %d): bad channel %d\n", + __FUNCTION__, num, chan)); + errcode = -1; + } else if ((doff < SDPCM_HDRLEN) || (doff > sublen)) { + DHD_ERROR(("%s (subframe %d): Bad data offset %d: HW %d min %d\n", + __FUNCTION__, num, doff, sublen, SDPCM_HDRLEN)); + errcode = -1; + } + } + + if (errcode) { + /* Terminate frame on error, request a couple retries */ + if (bus->glomerr++ < 3) { + /* Restore superframe header space */ + PKTPUSH(osh, pfirst, sfdoff); + dhdsdio_rxfail(bus, TRUE, TRUE); + } else { + bus->glomerr = 0; + dhdsdio_rxfail(bus, TRUE, FALSE); + dhd_os_sdlock_rxq(bus->dhd); + PKTFREE(osh, bus->glom, FALSE); + dhd_os_sdunlock_rxq(bus->dhd); + bus->rxglomfail++; + bus->glom = NULL; + } + bus->nextlen = 0; + return 0; + } + + /* Basic SD framing looks ok - process each packet (header) */ + bus->glom = NULL; + plast = NULL; + + dhd_os_sdlock_rxq(bus->dhd); + for (num = 0; pfirst; rxseq++, pfirst = pnext) { + pnext = PKTNEXT(osh, pfirst); + PKTSETNEXT(osh, pfirst, NULL); + + dptr = (uint8 *)PKTDATA(osh, pfirst); + sublen = ltoh16_ua(dptr); + chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]); + seq = SDPCM_PACKET_SEQUENCE(&dptr[SDPCM_FRAMETAG_LEN]); + doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]); + + DHD_GLOM(("%s: Get subframe %d, %p(%p/%d), sublen %d chan %d seq %d\n", + __FUNCTION__, num, pfirst, PKTDATA(osh, pfirst), + PKTLEN(osh, pfirst), sublen, chan, seq)); + + ASSERT((chan == SDPCM_DATA_CHANNEL) || (chan == SDPCM_EVENT_CHANNEL)); + + if (rxseq != seq) { + DHD_GLOM(("%s: rx_seq %d, expected %d\n", + __FUNCTION__, seq, rxseq)); + bus->rx_badseq++; + rxseq = seq; + } + +#ifdef DHD_DEBUG + if (DHD_BYTES_ON() && DHD_DATA_ON()) { + prhex("Rx Subframe Data", dptr, dlen); + } +#endif + + PKTSETLEN(osh, pfirst, sublen); + PKTPULL(osh, pfirst, doff); + + reorder_info_len = sizeof(reorder_info_buf); + + if (PKTLEN(osh, pfirst) == 0) { + PKTFREE(bus->dhd->osh, pfirst, FALSE); + continue; + } else if (dhd_prot_hdrpull(bus->dhd, &ifidx, pfirst, reorder_info_buf, + &reorder_info_len) != 0) { + DHD_ERROR(("%s: rx protocol error\n", __FUNCTION__)); + bus->dhd->rx_errors++; + PKTFREE(osh, pfirst, FALSE); + continue; + } + if (reorder_info_len) { + uint32 free_buf_count; + void *ppfirst; + + ppfirst = pfirst; + /* Reordering info from the firmware */ + dhd_process_pkt_reorder_info(bus->dhd, reorder_info_buf, + reorder_info_len, &ppfirst, &free_buf_count); + + if (free_buf_count == 0) { + continue; + } + else { + void *temp; + + /* go to the end of the chain and attach the pnext there */ + temp = ppfirst; + while (PKTNEXT(osh, temp) != NULL) { + temp = PKTNEXT(osh, temp); + } + pfirst = temp; + if (list_tail[ifidx] == NULL) + list_head[ifidx] = ppfirst; + else + PKTSETNEXT(osh, list_tail[ifidx], ppfirst); + list_tail[ifidx] = pfirst; + } + + num += (uint8)free_buf_count; + } + else { + /* this packet will go up, link back into chain and count it */ + + if (list_tail[ifidx] == NULL) { + list_head[ifidx] = list_tail[ifidx] = pfirst; + } + else { + PKTSETNEXT(osh, list_tail[ifidx], pfirst); + list_tail[ifidx] = pfirst; + } + num++; + } +#ifdef DHD_DEBUG + if (DHD_GLOM_ON()) { + DHD_GLOM(("%s subframe %d to stack, %p(%p/%d) nxt/lnk %p/%p\n", + __FUNCTION__, num, pfirst, + PKTDATA(osh, pfirst), PKTLEN(osh, pfirst), + PKTNEXT(osh, pfirst), PKTLINK(pfirst))); + prhex("", (uint8 *)PKTDATA(osh, pfirst), + MIN(PKTLEN(osh, pfirst), 32)); + } +#endif /* DHD_DEBUG */ + } + dhd_os_sdunlock_rxq(bus->dhd); + + for (idx = 0; idx < DHD_MAX_IFS; idx++) { + if (list_head[idx]) { + void *temp; + uint8 cnt = 0; + temp = list_head[idx]; + do { + temp = PKTNEXT(osh, temp); + cnt++; + } while (temp); + if (cnt) { + dhd_os_sdunlock(bus->dhd); + dhd_rx_frame(bus->dhd, idx, list_head[idx], cnt, 0); + dhd_os_sdlock(bus->dhd); + } + } + } + bus->rxglomframes++; + bus->rxglompkts += num; + } + return num; +} + + +#ifdef SDHOST3 +static bool +dhdsdio_pr94636_WAR(dhd_bus_t *bus) +{ + uint cd = 0; + uint ld = 0; + int bcmerror = 0; + uint32 l_data[5]; + uint32 l_addr = (0x18002200 & SBSDIO_SB_OFT_ADDR_MASK); + + /* Read 20 bytes from 0x18002200 + * the sdiod Tx DMA registers address on AI Backplane. + */ + if ((bcmerror = bcmsdh_rwdata(bus->sdh, FALSE, l_addr, (uint8 *)&l_data[0], 20))) { + DHD_ERROR(("%s: bcmsdh_rwdata failed\n", __FUNCTION__)); + return FALSE; + } + ld = l_data[1]; + ld = ld & 0x00001fff; + cd = l_data[4]; + cd = cd & 0x00001fff; + if (cd == ld) + return TRUE; + else + return FALSE; +} +#endif /* SDHOST3 */ +/* Return TRUE if there may be more frames to read */ +static uint +dhdsdio_readframes(dhd_bus_t *bus, uint maxframes, bool *finished) +{ + osl_t *osh = bus->dhd->osh; + bcmsdh_info_t *sdh = bus->sdh; + + uint16 len, check; /* Extracted hardware header fields */ + uint8 chan, seq, doff; /* Extracted software header fields */ + uint8 fcbits; /* Extracted fcbits from software header */ + uint8 delta; + + void *pkt; /* Packet for event or data frames */ + uint16 pad; /* Number of pad bytes to read */ + uint16 rdlen; /* Total number of bytes to read */ + uint8 rxseq; /* Next sequence number to expect */ + uint rxleft = 0; /* Remaining number of frames allowed */ + int sdret; /* Return code from bcmsdh calls */ + uint8 txmax; /* Maximum tx sequence offered */ + bool len_consistent; /* Result of comparing readahead len and len from hw-hdr */ + uint8 *rxbuf; + int ifidx = 0; + uint rxcount = 0; /* Total frames read */ + uchar reorder_info_buf[WLHOST_REORDERDATA_TOTLEN]; + uint reorder_info_len; + uint pkt_count; + +#if defined(DHD_DEBUG) || defined(SDTEST) + bool sdtest = FALSE; /* To limit message spew from test mode */ +#endif + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + bus->readframes = TRUE; + + if (!KSO_ENAB(bus)) { + DHD_ERROR(("%s: KSO off\n", __FUNCTION__)); + bus->readframes = FALSE; + return 0; + } + + ASSERT(maxframes); + +#ifdef SDTEST + /* Allow pktgen to override maxframes */ + if (bus->pktgen_count && (bus->pktgen_mode == DHD_PKTGEN_RECV)) { + maxframes = bus->pktgen_count; + sdtest = TRUE; + } +#endif + + /* Not finished unless we encounter no more frames indication */ + *finished = FALSE; + + + for (rxseq = bus->rx_seq, rxleft = maxframes; + !bus->rxskip && rxleft && bus->dhd->busstate != DHD_BUS_DOWN; + rxseq++, rxleft--) { +#ifdef DHDTCPACK_SUP_DBG + if (bus->dhd->tcpack_sup_mode != TCPACK_SUP_DELAYTX) { + if (bus->dotxinrx == FALSE) + DHD_ERROR(("%s %d: dotxinrx FALSE with tcpack_sub_mode %d\n", + __FUNCTION__, __LINE__, bus->dhd->tcpack_sup_mode)); + } +#ifdef DEBUG_COUNTER + else if (pktq_mlen(&bus->txq, ~bus->flowcontrol) > 0) { + tack_tbl.cnt[bus->dotxinrx ? 6 : 7]++; + } +#endif /* DEBUG_COUNTER */ +#endif /* DHDTCPACK_SUP_DBG */ + /* tx more to improve rx performance */ + if (TXCTLOK(bus) && bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL)) { + dhdsdio_sendpendctl(bus); + } else if (bus->dotxinrx && (bus->clkstate == CLK_AVAIL) && + !bus->fcstate && DATAOK(bus) && + (pktq_mlen(&bus->txq, ~bus->flowcontrol) > bus->txinrx_thres)) { + dhdsdio_sendfromq(bus, dhd_txbound); +#ifdef DHDTCPACK_SUPPRESS + /* In TCPACK_SUP_DELAYTX mode, do txinrx only if + * 1. Any DATA packet to TX + * 2. TCPACK to TCPDATA PSH packets. + * in bus txq. + */ + bus->dotxinrx = (bus->dhd->tcpack_sup_mode == TCPACK_SUP_DELAYTX) ? + FALSE : TRUE; +#endif + } + + /* Handle glomming separately */ + if (bus->glom || bus->glomd) { + uint8 cnt; + DHD_GLOM(("%s: calling rxglom: glomd %p, glom %p\n", + __FUNCTION__, bus->glomd, bus->glom)); + cnt = dhdsdio_rxglom(bus, rxseq); + DHD_GLOM(("%s: rxglom returned %d\n", __FUNCTION__, cnt)); + rxseq += cnt - 1; + rxleft = (rxleft > cnt) ? (rxleft - cnt) : 1; + continue; + } + + /* Try doing single read if we can */ + if (dhd_readahead && bus->nextlen) { + uint16 nextlen = bus->nextlen; + bus->nextlen = 0; + + if (bus->bus == SPI_BUS) { + rdlen = len = nextlen; + } + else { + rdlen = len = nextlen << 4; + + /* Pad read to blocksize for efficiency */ + if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) { + pad = bus->blocksize - (rdlen % bus->blocksize); + if ((pad <= bus->roundup) && (pad < bus->blocksize) && + ((rdlen + pad + firstread) < MAX_RX_DATASZ)) + rdlen += pad; + } else if (rdlen % DHD_SDALIGN) { + rdlen += DHD_SDALIGN - (rdlen % DHD_SDALIGN); + } + } + + /* We use bus->rxctl buffer in WinXP for initial control pkt receives. + * Later we use buffer-poll for data as well as control packets. + * This is required because dhd receives full frame in gSPI unlike SDIO. + * After the frame is received we have to distinguish whether it is data + * or non-data frame. + */ + /* Allocate a packet buffer */ + dhd_os_sdlock_rxq(bus->dhd); + if (!(pkt = PKTGET(osh, rdlen + DHD_SDALIGN, FALSE))) { + if (bus->bus == SPI_BUS) { + bus->usebufpool = FALSE; + bus->rxctl = bus->rxbuf; + if (dhd_alignctl) { + bus->rxctl += firstread; + if ((pad = ((uintptr)bus->rxctl % DHD_SDALIGN))) + bus->rxctl += (DHD_SDALIGN - pad); + bus->rxctl -= firstread; + } + ASSERT(bus->rxctl >= bus->rxbuf); + rxbuf = bus->rxctl; + /* Read the entire frame */ + sdret = dhd_bcmsdh_recv_buf(bus, + bcmsdh_cur_sbwad(sdh), + SDIO_FUNC_2, + F2SYNC, rxbuf, rdlen, + NULL, NULL, NULL); + bus->f2rxdata++; + ASSERT(sdret != BCME_PENDING); + + + /* Control frame failures need retransmission */ + if (sdret < 0) { + DHD_ERROR(("%s: read %d control bytes failed: %d\n", + __FUNCTION__, rdlen, sdret)); + /* dhd.rx_ctlerrs is higher level */ + bus->rxc_errors++; + dhd_os_sdunlock_rxq(bus->dhd); + dhdsdio_rxfail(bus, TRUE, + (bus->bus == SPI_BUS) ? FALSE : TRUE); + continue; + } + } else { + /* Give up on data, request rtx of events */ + DHD_ERROR(("%s (nextlen): PKTGET failed: len %d rdlen %d " + "expected rxseq %d\n", + __FUNCTION__, len, rdlen, rxseq)); + /* Just go try again w/normal header read */ + dhd_os_sdunlock_rxq(bus->dhd); + continue; + } + } else { + if (bus->bus == SPI_BUS) + bus->usebufpool = TRUE; + + ASSERT(!PKTLINK(pkt)); + PKTALIGN(osh, pkt, rdlen, DHD_SDALIGN); + rxbuf = (uint8 *)PKTDATA(osh, pkt); + /* Read the entire frame */ + sdret = dhd_bcmsdh_recv_buf(bus, bcmsdh_cur_sbwad(sdh), + SDIO_FUNC_2, + F2SYNC, rxbuf, rdlen, + pkt, NULL, NULL); + bus->f2rxdata++; + ASSERT(sdret != BCME_PENDING); + + if (sdret < 0) { + DHD_ERROR(("%s (nextlen): read %d bytes failed: %d\n", + __FUNCTION__, rdlen, sdret)); + PKTFREE(bus->dhd->osh, pkt, FALSE); + bus->dhd->rx_errors++; + dhd_os_sdunlock_rxq(bus->dhd); + /* Force retry w/normal header read. Don't attempt NAK for + * gSPI + */ + dhdsdio_rxfail(bus, TRUE, + (bus->bus == SPI_BUS) ? FALSE : TRUE); + continue; + } + } + dhd_os_sdunlock_rxq(bus->dhd); + + /* Now check the header */ + bcopy(rxbuf, bus->rxhdr, SDPCM_HDRLEN); + + /* Extract hardware header fields */ + len = ltoh16_ua(bus->rxhdr); + check = ltoh16_ua(bus->rxhdr + sizeof(uint16)); + + /* All zeros means readahead info was bad */ + if (!(len|check)) { + DHD_INFO(("%s (nextlen): read zeros in HW header???\n", + __FUNCTION__)); + dhd_os_sdlock_rxq(bus->dhd); + PKTFREE2(); + dhd_os_sdunlock_rxq(bus->dhd); + GSPI_PR55150_BAILOUT; + continue; + } + + /* Validate check bytes */ + if ((uint16)~(len^check)) { + DHD_ERROR(("%s (nextlen): HW hdr error: nextlen/len/check" + " 0x%04x/0x%04x/0x%04x\n", __FUNCTION__, nextlen, + len, check)); + dhd_os_sdlock_rxq(bus->dhd); + PKTFREE2(); + dhd_os_sdunlock_rxq(bus->dhd); + bus->rx_badhdr++; + dhdsdio_rxfail(bus, FALSE, FALSE); + GSPI_PR55150_BAILOUT; + continue; + } + + /* Validate frame length */ + if (len < SDPCM_HDRLEN) { + DHD_ERROR(("%s (nextlen): HW hdr length invalid: %d\n", + __FUNCTION__, len)); + dhd_os_sdlock_rxq(bus->dhd); + PKTFREE2(); + dhd_os_sdunlock_rxq(bus->dhd); + GSPI_PR55150_BAILOUT; + continue; + } + + /* Check for consistency with readahead info */ + len_consistent = (nextlen != (ROUNDUP(len, 16) >> 4)); + if (len_consistent) { + /* Mismatch, force retry w/normal header (may be >4K) */ + DHD_ERROR(("%s (nextlen): mismatch, nextlen %d len %d rnd %d; " + "expected rxseq %d\n", + __FUNCTION__, nextlen, len, ROUNDUP(len, 16), rxseq)); + dhd_os_sdlock_rxq(bus->dhd); + PKTFREE2(); + dhd_os_sdunlock_rxq(bus->dhd); + dhdsdio_rxfail(bus, TRUE, (bus->bus == SPI_BUS) ? FALSE : TRUE); + GSPI_PR55150_BAILOUT; + continue; + } + + + /* Extract software header fields */ + chan = SDPCM_PACKET_CHANNEL(&bus->rxhdr[SDPCM_FRAMETAG_LEN]); + seq = SDPCM_PACKET_SEQUENCE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]); + doff = SDPCM_DOFFSET_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]); + txmax = SDPCM_WINDOW_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]); + + bus->nextlen = + bus->rxhdr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET]; + if ((bus->nextlen << 4) > MAX_RX_DATASZ) { + DHD_INFO(("%s (nextlen): got frame w/nextlen too large" + " (%d), seq %d\n", __FUNCTION__, bus->nextlen, + seq)); + bus->nextlen = 0; + } + + bus->dhd->rx_readahead_cnt ++; + /* Handle Flow Control */ + fcbits = SDPCM_FCMASK_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]); + + delta = 0; + if (~bus->flowcontrol & fcbits) { + bus->fc_xoff++; + delta = 1; + } + if (bus->flowcontrol & ~fcbits) { + bus->fc_xon++; + delta = 1; + } + + if (delta) { + bus->fc_rcvd++; + bus->flowcontrol = fcbits; + } + + /* Check and update sequence number */ + if (rxseq != seq) { + DHD_INFO(("%s (nextlen): rx_seq %d, expected %d\n", + __FUNCTION__, seq, rxseq)); + bus->rx_badseq++; + rxseq = seq; + } + + /* Check window for sanity */ + if ((uint8)(txmax - bus->tx_seq) > 0x70) { + DHD_ERROR(("%s: got unlikely tx max %d with tx_seq %d\n", + __FUNCTION__, txmax, bus->tx_seq)); + txmax = bus->tx_max; + } + bus->tx_max = txmax; + +#ifdef DHD_DEBUG + if (DHD_BYTES_ON() && DHD_DATA_ON()) { + prhex("Rx Data", rxbuf, len); + } else if (DHD_HDRS_ON()) { + prhex("RxHdr", bus->rxhdr, SDPCM_HDRLEN); + } +#endif + + if (chan == SDPCM_CONTROL_CHANNEL) { + if (bus->bus == SPI_BUS) { + dhdsdio_read_control(bus, rxbuf, len, doff); + if (bus->usebufpool) { + dhd_os_sdlock_rxq(bus->dhd); + PKTFREE(bus->dhd->osh, pkt, FALSE); + dhd_os_sdunlock_rxq(bus->dhd); + } + continue; + } else { + DHD_ERROR(("%s (nextlen): readahead on control" + " packet %d?\n", __FUNCTION__, seq)); + /* Force retry w/normal header read */ + bus->nextlen = 0; + dhdsdio_rxfail(bus, FALSE, TRUE); + dhd_os_sdlock_rxq(bus->dhd); + PKTFREE2(); + dhd_os_sdunlock_rxq(bus->dhd); + continue; + } + } + + if ((bus->bus == SPI_BUS) && !bus->usebufpool) { + DHD_ERROR(("Received %d bytes on %d channel. Running out of " + "rx pktbuf's or not yet malloced.\n", len, chan)); + continue; + } + + /* Validate data offset */ + if ((doff < SDPCM_HDRLEN) || (doff > len)) { + DHD_ERROR(("%s (nextlen): bad data offset %d: HW len %d min %d\n", + __FUNCTION__, doff, len, SDPCM_HDRLEN)); + dhd_os_sdlock_rxq(bus->dhd); + PKTFREE2(); + dhd_os_sdunlock_rxq(bus->dhd); + ASSERT(0); + dhdsdio_rxfail(bus, FALSE, FALSE); + continue; + } + + /* All done with this one -- now deliver the packet */ + goto deliver; + } + /* gSPI frames should not be handled in fractions */ + if (bus->bus == SPI_BUS) { + break; + } +#ifdef SDHOST3 + if (((((uint16)bus->sih->chip) == BCM4324_CHIP_ID) && (bus->sih->chiprev <= 1)) || + (((uint16)bus->sih->chip) == BCM43340_CHIP_ID) || + (((uint16)bus->sih->chip) == BCM43341_CHIP_ID) || + (((uint16)bus->sih->chip) == BCM4334_CHIP_ID)) { + if (dhdsdio_pr94636_WAR(bus) == TRUE) { + *finished = TRUE; + break; + } + } +#endif /* SDHOST3 */ + + /* Read frame header (hardware and software) */ + sdret = dhd_bcmsdh_recv_buf(bus, bcmsdh_cur_sbwad(sdh), SDIO_FUNC_2, F2SYNC, + bus->rxhdr, firstread, NULL, NULL, NULL); + bus->f2rxhdrs++; + ASSERT(sdret != BCME_PENDING); + + if (sdret < 0) { + DHD_ERROR(("%s: RXHEADER FAILED: %d\n", __FUNCTION__, sdret)); + bus->rx_hdrfail++; + dhdsdio_rxfail(bus, TRUE, TRUE); + continue; + } + +#ifdef DHD_DEBUG + if (DHD_BYTES_ON() || DHD_HDRS_ON()) { + prhex("RxHdr", bus->rxhdr, SDPCM_HDRLEN); + } +#endif + + /* Extract hardware header fields */ + len = ltoh16_ua(bus->rxhdr); + check = ltoh16_ua(bus->rxhdr + sizeof(uint16)); + + /* All zeros means no more frames */ + if (!(len|check)) { + *finished = TRUE; + break; + } + + /* Validate check bytes */ + if ((uint16)~(len^check)) { + DHD_ERROR(("%s: HW hdr error: len/check 0x%04x/0x%04x\n", + __FUNCTION__, len, check)); + bus->rx_badhdr++; + dhdsdio_rxfail(bus, FALSE, FALSE); + continue; + } + + /* Validate frame length */ + if (len < SDPCM_HDRLEN) { + DHD_ERROR(("%s: HW hdr length invalid: %d\n", __FUNCTION__, len)); + continue; + } + + /* Extract software header fields */ + chan = SDPCM_PACKET_CHANNEL(&bus->rxhdr[SDPCM_FRAMETAG_LEN]); + seq = SDPCM_PACKET_SEQUENCE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]); + doff = SDPCM_DOFFSET_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]); + txmax = SDPCM_WINDOW_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]); + + /* Validate data offset */ + if ((doff < SDPCM_HDRLEN) || (doff > len)) { + DHD_ERROR(("%s: Bad data offset %d: HW len %d, min %d seq %d\n", + __FUNCTION__, doff, len, SDPCM_HDRLEN, seq)); + bus->rx_badhdr++; + ASSERT(0); + dhdsdio_rxfail(bus, FALSE, FALSE); + continue; + } + + /* Save the readahead length if there is one */ + bus->nextlen = bus->rxhdr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET]; + if ((bus->nextlen << 4) > MAX_RX_DATASZ) { + DHD_INFO(("%s (nextlen): got frame w/nextlen too large (%d), seq %d\n", + __FUNCTION__, bus->nextlen, seq)); + bus->nextlen = 0; + } + + /* Handle Flow Control */ + fcbits = SDPCM_FCMASK_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]); + + delta = 0; + if (~bus->flowcontrol & fcbits) { + bus->fc_xoff++; + delta = 1; + } + if (bus->flowcontrol & ~fcbits) { + bus->fc_xon++; + delta = 1; + } + + if (delta) { + bus->fc_rcvd++; + bus->flowcontrol = fcbits; + } + + /* Check and update sequence number */ + if (rxseq != seq) { + DHD_INFO(("%s: rx_seq %d, expected %d\n", __FUNCTION__, seq, rxseq)); + bus->rx_badseq++; + rxseq = seq; + } + + /* Check window for sanity */ + if ((uint8)(txmax - bus->tx_seq) > 0x70) { + DHD_ERROR(("%s: got unlikely tx max %d with tx_seq %d\n", + __FUNCTION__, txmax, bus->tx_seq)); + txmax = bus->tx_max; + } + bus->tx_max = txmax; + + /* Call a separate function for control frames */ + if (chan == SDPCM_CONTROL_CHANNEL) { + dhdsdio_read_control(bus, bus->rxhdr, len, doff); + continue; + } + + ASSERT((chan == SDPCM_DATA_CHANNEL) || (chan == SDPCM_EVENT_CHANNEL) || + (chan == SDPCM_TEST_CHANNEL) || (chan == SDPCM_GLOM_CHANNEL)); + + /* Length to read */ + rdlen = (len > firstread) ? (len - firstread) : 0; + + /* May pad read to blocksize for efficiency */ + if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) { + pad = bus->blocksize - (rdlen % bus->blocksize); + if ((pad <= bus->roundup) && (pad < bus->blocksize) && + ((rdlen + pad + firstread) < MAX_RX_DATASZ)) + rdlen += pad; + } else if (rdlen % DHD_SDALIGN) { + rdlen += DHD_SDALIGN - (rdlen % DHD_SDALIGN); + } + + /* Satisfy length-alignment requirements */ + if (forcealign && (rdlen & (ALIGNMENT - 1))) + rdlen = ROUNDUP(rdlen, ALIGNMENT); + + if ((rdlen + firstread) > MAX_RX_DATASZ) { + /* Too long -- skip this frame */ + DHD_ERROR(("%s: too long: len %d rdlen %d\n", __FUNCTION__, len, rdlen)); + bus->dhd->rx_errors++; bus->rx_toolong++; + dhdsdio_rxfail(bus, FALSE, FALSE); + continue; + } + + dhd_os_sdlock_rxq(bus->dhd); + if (!(pkt = PKTGET(osh, (rdlen + firstread + DHD_SDALIGN), FALSE))) { + /* Give up on data, request rtx of events */ + DHD_ERROR(("%s: PKTGET failed: rdlen %d chan %d\n", + __FUNCTION__, rdlen, chan)); + bus->dhd->rx_dropped++; + dhd_os_sdunlock_rxq(bus->dhd); + dhdsdio_rxfail(bus, FALSE, RETRYCHAN(chan)); + continue; + } + dhd_os_sdunlock_rxq(bus->dhd); + + ASSERT(!PKTLINK(pkt)); + + /* Leave room for what we already read, and align remainder */ + ASSERT(firstread < (PKTLEN(osh, pkt))); + PKTPULL(osh, pkt, firstread); + PKTALIGN(osh, pkt, rdlen, DHD_SDALIGN); + + /* Read the remaining frame data */ + sdret = dhd_bcmsdh_recv_buf(bus, bcmsdh_cur_sbwad(sdh), SDIO_FUNC_2, F2SYNC, + ((uint8 *)PKTDATA(osh, pkt)), rdlen, pkt, NULL, NULL); + bus->f2rxdata++; + ASSERT(sdret != BCME_PENDING); + + if (sdret < 0) { + DHD_ERROR(("%s: read %d %s bytes failed: %d\n", __FUNCTION__, rdlen, + ((chan == SDPCM_EVENT_CHANNEL) ? "event" : + ((chan == SDPCM_DATA_CHANNEL) ? "data" : "test")), sdret)); + dhd_os_sdlock_rxq(bus->dhd); + PKTFREE(bus->dhd->osh, pkt, FALSE); + dhd_os_sdunlock_rxq(bus->dhd); + bus->dhd->rx_errors++; + dhdsdio_rxfail(bus, TRUE, RETRYCHAN(chan)); + continue; + } + + /* Copy the already-read portion */ + PKTPUSH(osh, pkt, firstread); + bcopy(bus->rxhdr, PKTDATA(osh, pkt), firstread); + +#ifdef DHD_DEBUG + if (DHD_BYTES_ON() && DHD_DATA_ON()) { + prhex("Rx Data", PKTDATA(osh, pkt), len); + } +#endif + +deliver: + /* Save superframe descriptor and allocate packet frame */ + if (chan == SDPCM_GLOM_CHANNEL) { + if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_FRAMETAG_LEN])) { + DHD_GLOM(("%s: got glom descriptor, %d bytes:\n", + __FUNCTION__, len)); +#ifdef DHD_DEBUG + if (DHD_GLOM_ON()) { + prhex("Glom Data", PKTDATA(osh, pkt), len); + } +#endif + PKTSETLEN(osh, pkt, len); + ASSERT(doff == SDPCM_HDRLEN); + PKTPULL(osh, pkt, SDPCM_HDRLEN); + bus->glomd = pkt; + } else { + DHD_ERROR(("%s: glom superframe w/o descriptor!\n", __FUNCTION__)); + dhdsdio_rxfail(bus, FALSE, FALSE); + } + continue; + } + + /* Fill in packet len and prio, deliver upward */ + PKTSETLEN(osh, pkt, len); + PKTPULL(osh, pkt, doff); + +#ifdef SDTEST + /* Test channel packets are processed separately */ + if (chan == SDPCM_TEST_CHANNEL) { + dhdsdio_testrcv(bus, pkt, seq); + continue; + } +#endif /* SDTEST */ + + if (PKTLEN(osh, pkt) == 0) { + dhd_os_sdlock_rxq(bus->dhd); + PKTFREE(bus->dhd->osh, pkt, FALSE); + dhd_os_sdunlock_rxq(bus->dhd); + continue; + } else if (dhd_prot_hdrpull(bus->dhd, &ifidx, pkt, reorder_info_buf, + &reorder_info_len) != 0) { + DHD_ERROR(("%s: rx protocol error\n", __FUNCTION__)); + dhd_os_sdlock_rxq(bus->dhd); + PKTFREE(bus->dhd->osh, pkt, FALSE); + dhd_os_sdunlock_rxq(bus->dhd); + bus->dhd->rx_errors++; + continue; + } + if (reorder_info_len) { + /* Reordering info from the firmware */ + dhd_process_pkt_reorder_info(bus->dhd, reorder_info_buf, reorder_info_len, + &pkt, &pkt_count); + if (pkt_count == 0) + continue; + } + else + pkt_count = 1; + + /* Unlock during rx call */ + dhd_os_sdunlock(bus->dhd); + dhd_rx_frame(bus->dhd, ifidx, pkt, pkt_count, chan); + dhd_os_sdlock(bus->dhd); + } + rxcount = maxframes - rxleft; +#ifdef DHD_DEBUG + /* Message if we hit the limit */ + if (!rxleft && !sdtest) + DHD_DATA(("%s: hit rx limit of %d frames\n", __FUNCTION__, maxframes)); + else +#endif /* DHD_DEBUG */ + DHD_DATA(("%s: processed %d frames\n", __FUNCTION__, rxcount)); + /* Back off rxseq if awaiting rtx, update rx_seq */ + if (bus->rxskip) + rxseq--; + bus->rx_seq = rxseq; + + if (bus->reqbussleep) + { + dhdsdio_bussleep(bus, TRUE); + bus->reqbussleep = FALSE; + } + bus->readframes = FALSE; + + return rxcount; +} + +static uint32 +dhdsdio_hostmail(dhd_bus_t *bus) +{ + sdpcmd_regs_t *regs = bus->regs; + uint32 intstatus = 0; + uint32 hmb_data; + uint8 fcbits; + uint retries = 0; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + /* Read mailbox data and ack that we did so */ + R_SDREG(hmb_data, ®s->tohostmailboxdata, retries); + if (retries <= retry_limit) + W_SDREG(SMB_INT_ACK, ®s->tosbmailbox, retries); + bus->f1regdata += 2; + + /* Dongle recomposed rx frames, accept them again */ + if (hmb_data & HMB_DATA_NAKHANDLED) { + DHD_INFO(("Dongle reports NAK handled, expect rtx of %d\n", bus->rx_seq)); + if (!bus->rxskip) { + DHD_ERROR(("%s: unexpected NAKHANDLED!\n", __FUNCTION__)); + } + bus->rxskip = FALSE; + intstatus |= FRAME_AVAIL_MASK(bus); + } + + /* + * DEVREADY does not occur with gSPI. + */ + if (hmb_data & (HMB_DATA_DEVREADY | HMB_DATA_FWREADY)) { + bus->sdpcm_ver = (hmb_data & HMB_DATA_VERSION_MASK) >> HMB_DATA_VERSION_SHIFT; + if (bus->sdpcm_ver != SDPCM_PROT_VERSION) + DHD_ERROR(("Version mismatch, dongle reports %d, expecting %d\n", + bus->sdpcm_ver, SDPCM_PROT_VERSION)); + else + DHD_INFO(("Dongle ready, protocol version %d\n", bus->sdpcm_ver)); + /* make sure for the SDIO_DEVICE_RXDATAINT_MODE_1 corecontrol is proper */ + if ((bus->sih->buscoretype == SDIOD_CORE_ID) && (bus->sdpcmrev >= 4) && + (bus->rxint_mode == SDIO_DEVICE_RXDATAINT_MODE_1)) { + uint32 val; + + val = R_REG(bus->dhd->osh, &bus->regs->corecontrol); + val &= ~CC_XMTDATAAVAIL_MODE; + val |= CC_XMTDATAAVAIL_CTRL; + W_REG(bus->dhd->osh, &bus->regs->corecontrol, val); + + val = R_REG(bus->dhd->osh, &bus->regs->corecontrol); + } + +#ifdef DHD_DEBUG + /* Retrieve console state address now that firmware should have updated it */ + { + sdpcm_shared_t shared; + if (dhdsdio_readshared(bus, &shared) == 0) + bus->console_addr = shared.console_addr; + } +#endif /* DHD_DEBUG */ + } + + /* + * Flow Control has been moved into the RX headers and this out of band + * method isn't used any more. Leave this here for possibly remaining backward + * compatible with older dongles + */ + if (hmb_data & HMB_DATA_FC) { + fcbits = (hmb_data & HMB_DATA_FCDATA_MASK) >> HMB_DATA_FCDATA_SHIFT; + + if (fcbits & ~bus->flowcontrol) + bus->fc_xoff++; + if (bus->flowcontrol & ~fcbits) + bus->fc_xon++; + + bus->fc_rcvd++; + bus->flowcontrol = fcbits; + } + +#ifdef DHD_DEBUG + /* At least print a message if FW halted */ + if (hmb_data & HMB_DATA_FWHALT) { + DHD_ERROR(("INTERNAL ERROR: FIRMWARE HALTED : set BUS DOWN\n")); + dhdsdio_checkdied(bus, NULL, 0); + bus->dhd->busstate = DHD_BUS_DOWN; + } +#endif /* DHD_DEBUG */ + + /* Shouldn't be any others */ + if (hmb_data & ~(HMB_DATA_DEVREADY | + HMB_DATA_FWHALT | + HMB_DATA_NAKHANDLED | + HMB_DATA_FC | + HMB_DATA_FWREADY | + HMB_DATA_FCDATA_MASK | + HMB_DATA_VERSION_MASK)) { + DHD_ERROR(("Unknown mailbox data content: 0x%02x\n", hmb_data)); + } + + return intstatus; +} + +static bool +dhdsdio_dpc(dhd_bus_t *bus) +{ + bcmsdh_info_t *sdh = bus->sdh; + sdpcmd_regs_t *regs = bus->regs; + uint32 intstatus, newstatus = 0; + uint retries = 0; + uint rxlimit = dhd_rxbound; /* Rx frames to read before resched */ + uint txlimit = dhd_txbound; /* Tx frames to send before resched */ + uint framecnt = 0; /* Temporary counter of tx/rx frames */ + bool rxdone = TRUE; /* Flag for no more read data */ + bool resched = FALSE; /* Flag indicating resched wanted */ + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + dhd_os_sdlock(bus->dhd); + + if (bus->dhd->busstate == DHD_BUS_DOWN) { + DHD_ERROR(("%s: Bus down, ret\n", __FUNCTION__)); + bus->intstatus = 0; + dhd_os_sdunlock(bus->dhd); + return 0; + } + + /* Start with leftover status bits */ + intstatus = bus->intstatus; + + if (!SLPAUTO_ENAB(bus) && !KSO_ENAB(bus)) { + DHD_ERROR(("%s: Device asleep\n", __FUNCTION__)); + goto exit; + } + + /* If waiting for HTAVAIL, check status */ + if (!SLPAUTO_ENAB(bus) && (bus->clkstate == CLK_PENDING)) { + int err; + uint8 clkctl, devctl = 0; + +#ifdef DHD_DEBUG + /* Check for inconsistent device control */ + devctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, &err); + if (err) { + DHD_ERROR(("%s: error reading DEVCTL: %d\n", __FUNCTION__, err)); + bus->dhd->busstate = DHD_BUS_DOWN; + } else { + ASSERT(devctl & SBSDIO_DEVCTL_CA_INT_ONLY); + } +#endif /* DHD_DEBUG */ + + /* Read CSR, if clock on switch to AVAIL, else ignore */ + clkctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, &err); + if (err) { + DHD_ERROR(("%s: error reading CSR: %d\n", __FUNCTION__, err)); + bus->dhd->busstate = DHD_BUS_DOWN; + } + + DHD_INFO(("DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n", devctl, clkctl)); + + if (SBSDIO_HTAV(clkctl)) { + devctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, &err); + if (err) { + DHD_ERROR(("%s: error reading DEVCTL: %d\n", + __FUNCTION__, err)); + bus->dhd->busstate = DHD_BUS_DOWN; + } + devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, devctl, &err); + if (err) { + DHD_ERROR(("%s: error writing DEVCTL: %d\n", + __FUNCTION__, err)); + bus->dhd->busstate = DHD_BUS_DOWN; + } + bus->clkstate = CLK_AVAIL; + } else { + goto clkwait; + } + } + + BUS_WAKE(bus); + + /* Make sure backplane clock is on */ + dhdsdio_clkctl(bus, CLK_AVAIL, TRUE); + if (bus->clkstate != CLK_AVAIL) + goto clkwait; + + /* Pending interrupt indicates new device status */ + if (bus->ipend) { + bus->ipend = FALSE; + R_SDREG(newstatus, ®s->intstatus, retries); + bus->f1regdata++; + if (bcmsdh_regfail(bus->sdh)) + newstatus = 0; + newstatus &= bus->hostintmask; + bus->fcstate = !!(newstatus & I_HMB_FC_STATE); + if (newstatus) { + bus->f1regdata++; + if ((bus->rxint_mode == SDIO_DEVICE_RXDATAINT_MODE_0) && + (newstatus == I_XMTDATA_AVAIL)) { + } + else + W_SDREG(newstatus, ®s->intstatus, retries); + } + } + + /* Merge new bits with previous */ + intstatus |= newstatus; + bus->intstatus = 0; + + /* Handle flow-control change: read new state in case our ack + * crossed another change interrupt. If change still set, assume + * FC ON for safety, let next loop through do the debounce. + */ + if (intstatus & I_HMB_FC_CHANGE) { + intstatus &= ~I_HMB_FC_CHANGE; + W_SDREG(I_HMB_FC_CHANGE, ®s->intstatus, retries); + R_SDREG(newstatus, ®s->intstatus, retries); + bus->f1regdata += 2; + bus->fcstate = !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE)); + intstatus |= (newstatus & bus->hostintmask); + } + + /* Just being here means nothing more to do for chipactive */ + if (intstatus & I_CHIPACTIVE) { + /* ASSERT(bus->clkstate == CLK_AVAIL); */ + intstatus &= ~I_CHIPACTIVE; + } + + /* Handle host mailbox indication */ + if (intstatus & I_HMB_HOST_INT) { + intstatus &= ~I_HMB_HOST_INT; + intstatus |= dhdsdio_hostmail(bus); + } + + /* Generally don't ask for these, can get CRC errors... */ + if (intstatus & I_WR_OOSYNC) { + DHD_ERROR(("Dongle reports WR_OOSYNC\n")); + intstatus &= ~I_WR_OOSYNC; + } + + if (intstatus & I_RD_OOSYNC) { + DHD_ERROR(("Dongle reports RD_OOSYNC\n")); + intstatus &= ~I_RD_OOSYNC; + } + + if (intstatus & I_SBINT) { + DHD_ERROR(("Dongle reports SBINT\n")); + intstatus &= ~I_SBINT; + } + + /* Would be active due to wake-wlan in gSPI */ + if (intstatus & I_CHIPACTIVE) { + DHD_INFO(("Dongle reports CHIPACTIVE\n")); + intstatus &= ~I_CHIPACTIVE; + } + + if (intstatus & I_HMB_FC_STATE) { + DHD_INFO(("Dongle reports HMB_FC_STATE\n")); + intstatus &= ~I_HMB_FC_STATE; + } + + /* Ignore frame indications if rxskip is set */ + if (bus->rxskip) { + intstatus &= ~FRAME_AVAIL_MASK(bus); + } + + /* On frame indication, read available frames */ + if (PKT_AVAILABLE(bus, intstatus)) { + framecnt = dhdsdio_readframes(bus, rxlimit, &rxdone); + if (rxdone || bus->rxskip) + intstatus &= ~FRAME_AVAIL_MASK(bus); + rxlimit -= MIN(framecnt, rxlimit); + } + + /* Keep still-pending events for next scheduling */ + bus->intstatus = intstatus; + +clkwait: + /* Re-enable interrupts to detect new device events (mailbox, rx frame) + * or clock availability. (Allows tx loop to check ipend if desired.) + * (Unless register access seems hosed, as we may not be able to ACK...) + */ + if (bus->intr && bus->intdis && !bcmsdh_regfail(sdh)) { + DHD_INTR(("%s: enable SDIO interrupts, rxdone %d framecnt %d\n", + __FUNCTION__, rxdone, framecnt)); + bus->intdis = FALSE; +#if defined(OOB_INTR_ONLY) + OOB_PARAM_IF(!(bus->dhd->oob_disable)) { + bcmsdh_oob_intr_set(bus->sdh, TRUE); + } +#endif /* defined(OOB_INTR_ONLY) */ + bcmsdh_intr_enable(sdh); + } + +#if defined(OOB_INTR_ONLY) && !defined(HW_OOB) + OOB_PARAM_IF(!(bus->dhd->oob_disable)) { + /* In case of SW-OOB(using edge trigger), + * Check interrupt status in the dongle again after enable irq on the host. + * and rechedule dpc if interrupt is pended in the dongle. + * There is a chance to miss OOB interrupt while irq is disabled on the host. + * No need to do this with HW-OOB(level trigger) + */ + R_SDREG(newstatus, ®s->intstatus, retries); + if (bcmsdh_regfail(bus->sdh)) + newstatus = 0; + if (newstatus & bus->hostintmask) { + bus->ipend = TRUE; + resched = TRUE; + } + } +#endif /* defined(OOB_INTR_ONLY) && !defined(HW_OOB) */ + +#ifdef PROP_TXSTATUS + dhd_wlfc_commit_packets(bus->dhd, (f_commitpkt_t)dhd_bus_txdata, (void *)bus, NULL, FALSE); +#endif + + if (TXCTLOK(bus) && bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL)) + dhdsdio_sendpendctl(bus); + + /* Send queued frames (limit 1 if rx may still be pending) */ + else if ((bus->clkstate == CLK_AVAIL) && !bus->fcstate && + pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit && DATAOK(bus)) { + framecnt = rxdone ? txlimit : MIN(txlimit, dhd_txminmax); + framecnt = dhdsdio_sendfromq(bus, framecnt); + txlimit -= framecnt; + } + /* Resched the DPC if ctrl cmd is pending on bus credit */ + if (bus->ctrl_frame_stat) + resched = TRUE; + + /* Resched if events or tx frames are pending, else await next interrupt */ + /* On failed register access, all bets are off: no resched or interrupts */ + if ((bus->dhd->busstate == DHD_BUS_DOWN) || bcmsdh_regfail(sdh)) { + if ((bus->sih && bus->sih->buscorerev >= 12) && !(dhdsdio_sleepcsr_get(bus) & + SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) { + /* Bus failed because of KSO */ + DHD_ERROR(("%s: Bus failed due to KSO\n", __FUNCTION__)); + bus->kso = FALSE; + } else { + DHD_ERROR(("%s: failed backplane access over SDIO, halting operation\n", + __FUNCTION__)); + bus->dhd->busstate = DHD_BUS_DOWN; + bus->intstatus = 0; + } + } else if (bus->clkstate == CLK_PENDING) { + /* Awaiting I_CHIPACTIVE; don't resched */ + } else if (bus->intstatus || bus->ipend || + (!bus->fcstate && pktq_mlen(&bus->txq, ~bus->flowcontrol) && DATAOK(bus)) || + PKT_AVAILABLE(bus, bus->intstatus)) { /* Read multiple frames */ + resched = TRUE; + } + + bus->dpc_sched = resched; + + /* If we're done for now, turn off clock request. */ + if ((bus->idletime == DHD_IDLE_IMMEDIATE) && (bus->clkstate != CLK_PENDING)) { + bus->activity = FALSE; + dhdsdio_clkctl(bus, CLK_NONE, FALSE); + } + +exit: + + if (!resched && dhd_dpcpoll) { + if (dhdsdio_readframes(bus, dhd_rxbound, &rxdone) != 0) { + resched = TRUE; + } + } + + dhd_os_sdunlock(bus->dhd); + return resched; +} + +bool +dhd_bus_dpc(struct dhd_bus *bus) +{ + bool resched; + + /* Call the DPC directly. */ + DHD_TRACE(("Calling dhdsdio_dpc() from %s\n", __FUNCTION__)); + resched = dhdsdio_dpc(bus); + + return resched; +} + +void +dhdsdio_isr(void *arg) +{ + dhd_bus_t *bus = (dhd_bus_t*)arg; + bcmsdh_info_t *sdh; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + if (!bus) { + DHD_ERROR(("%s : bus is null pointer , exit \n", __FUNCTION__)); + return; + } + sdh = bus->sdh; + + if (bus->dhd->busstate == DHD_BUS_DOWN) { + DHD_ERROR(("%s : bus is down. we have nothing to do\n", __FUNCTION__)); + return; + } + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + /* Count the interrupt call */ + bus->intrcount++; + bus->ipend = TRUE; + + /* Shouldn't get this interrupt if we're sleeping? */ + if (!SLPAUTO_ENAB(bus)) { + if (bus->sleeping) { + DHD_ERROR(("INTERRUPT WHILE SLEEPING??\n")); + return; + } else if (!KSO_ENAB(bus)) { + DHD_ERROR(("ISR in devsleep 1\n")); + } + } + + /* Disable additional interrupts (is this needed now)? */ + if (bus->intr) { + DHD_INTR(("%s: disable SDIO interrupts\n", __FUNCTION__)); + } else { + DHD_ERROR(("dhdsdio_isr() w/o interrupt configured!\n")); + } + + bcmsdh_intr_disable(sdh); + bus->intdis = TRUE; + +#if defined(SDIO_ISR_THREAD) || defined(OOB_PARAM) + OOB_PARAM_IF(bus->dhd->oob_disable) { + DHD_TRACE(("Calling dhdsdio_dpc() from %s\n", __FUNCTION__)); + DHD_OS_WAKE_LOCK(bus->dhd); + dhdsdio_dpc(bus); + DHD_OS_WAKE_UNLOCK(bus->dhd); + } OOB_PARAM_ELSE() +#endif /* defined(SDIO_ISR_THREAD) || defined(OOB_PARAM) */ +#if !defined(SDIO_ISR_THREAD) || defined(OOB_PARAM) + { + bus->dpc_sched = TRUE; + dhd_sched_dpc(bus->dhd); + } +#endif /* !defined(SDIO_ISR_THREAD) || defined(OOB_PARAM) */ + + +} + +#ifdef SDTEST +static void +dhdsdio_pktgen_init(dhd_bus_t *bus) +{ + /* Default to specified length, or full range */ + if (dhd_pktgen_len) { + bus->pktgen_maxlen = MIN(dhd_pktgen_len, MAX_PKTGEN_LEN); + bus->pktgen_minlen = bus->pktgen_maxlen; + } else { + bus->pktgen_maxlen = MAX_PKTGEN_LEN; + bus->pktgen_minlen = 0; + } + bus->pktgen_len = (uint16)bus->pktgen_minlen; + + /* Default to per-watchdog burst with 10s print time */ + bus->pktgen_freq = 1; + bus->pktgen_print = dhd_watchdog_ms ? (10000 / dhd_watchdog_ms) : 0; + bus->pktgen_count = (dhd_pktgen * dhd_watchdog_ms + 999) / 1000; + + /* Default to echo mode */ + bus->pktgen_mode = DHD_PKTGEN_ECHO; + bus->pktgen_stop = 1; +} + +static void +dhdsdio_pktgen(dhd_bus_t *bus) +{ + void *pkt; + uint8 *data; + uint pktcount; + uint fillbyte; + osl_t *osh = bus->dhd->osh; + uint16 len; + ulong time_lapse; + uint sent_pkts; + uint rcvd_pkts; + + /* Display current count if appropriate */ + if (bus->pktgen_print && (++bus->pktgen_ptick >= bus->pktgen_print)) { + bus->pktgen_ptick = 0; + printf("%s: send attempts %d, rcvd %d, errors %d\n", + __FUNCTION__, bus->pktgen_sent, bus->pktgen_rcvd, bus->pktgen_fail); + + /* Print throughput stats only for constant length packet runs */ + if (bus->pktgen_minlen == bus->pktgen_maxlen) { + time_lapse = jiffies - bus->pktgen_prev_time; + bus->pktgen_prev_time = jiffies; + sent_pkts = bus->pktgen_sent - bus->pktgen_prev_sent; + bus->pktgen_prev_sent = bus->pktgen_sent; + rcvd_pkts = bus->pktgen_rcvd - bus->pktgen_prev_rcvd; + bus->pktgen_prev_rcvd = bus->pktgen_rcvd; + + printf("%s: Tx Throughput %d kbps, Rx Throughput %d kbps\n", + __FUNCTION__, + (sent_pkts * bus->pktgen_len / jiffies_to_msecs(time_lapse)) * 8, + (rcvd_pkts * bus->pktgen_len / jiffies_to_msecs(time_lapse)) * 8); + } + } + + /* For recv mode, just make sure dongle has started sending */ + if (bus->pktgen_mode == DHD_PKTGEN_RECV) { + if (bus->pktgen_rcv_state == PKTGEN_RCV_IDLE) { + bus->pktgen_rcv_state = PKTGEN_RCV_ONGOING; + dhdsdio_sdtest_set(bus, bus->pktgen_total); + } + return; + } + + /* Otherwise, generate or request the specified number of packets */ + for (pktcount = 0; pktcount < bus->pktgen_count; pktcount++) { + /* Stop if total has been reached */ + if (bus->pktgen_total && (bus->pktgen_sent >= bus->pktgen_total)) { + bus->pktgen_count = 0; + break; + } + + /* Allocate an appropriate-sized packet */ + if (bus->pktgen_mode == DHD_PKTGEN_RXBURST) { + len = SDPCM_TEST_PKT_CNT_FLD_LEN; + } else { + len = bus->pktgen_len; + } + if (!(pkt = PKTGET(osh, (len + SDPCM_HDRLEN + SDPCM_TEST_HDRLEN + DHD_SDALIGN), + TRUE))) {; + DHD_ERROR(("%s: PKTGET failed!\n", __FUNCTION__)); + break; + } + PKTALIGN(osh, pkt, (len + SDPCM_HDRLEN + SDPCM_TEST_HDRLEN), DHD_SDALIGN); + data = (uint8*)PKTDATA(osh, pkt) + SDPCM_HDRLEN; + + /* Write test header cmd and extra based on mode */ + switch (bus->pktgen_mode) { + case DHD_PKTGEN_ECHO: + *data++ = SDPCM_TEST_ECHOREQ; + *data++ = (uint8)bus->pktgen_sent; + break; + + case DHD_PKTGEN_SEND: + *data++ = SDPCM_TEST_DISCARD; + *data++ = (uint8)bus->pktgen_sent; + break; + + case DHD_PKTGEN_RXBURST: + *data++ = SDPCM_TEST_BURST; + *data++ = (uint8)bus->pktgen_count; /* Just for backward compatability */ + break; + + default: + DHD_ERROR(("Unrecognized pktgen mode %d\n", bus->pktgen_mode)); + PKTFREE(osh, pkt, TRUE); + bus->pktgen_count = 0; + return; + } + + /* Write test header length field */ + *data++ = (bus->pktgen_len >> 0); + *data++ = (bus->pktgen_len >> 8); + + /* Write frame count in a 4 byte field adjucent to SDPCM test header for + * burst mode + */ + if (bus->pktgen_mode == DHD_PKTGEN_RXBURST) { + *data++ = (uint8)(bus->pktgen_count >> 0); + *data++ = (uint8)(bus->pktgen_count >> 8); + *data++ = (uint8)(bus->pktgen_count >> 16); + *data++ = (uint8)(bus->pktgen_count >> 24); + } else { + + /* Then fill in the remainder -- N/A for burst */ + for (fillbyte = 0; fillbyte < len; fillbyte++) + *data++ = SDPCM_TEST_FILL(fillbyte, (uint8)bus->pktgen_sent); + } + +#ifdef DHD_DEBUG + if (DHD_BYTES_ON() && DHD_DATA_ON()) { + data = (uint8*)PKTDATA(osh, pkt) + SDPCM_HDRLEN; + prhex("dhdsdio_pktgen: Tx Data", data, PKTLEN(osh, pkt) - SDPCM_HDRLEN); + } +#endif + + /* Send it */ + if (dhdsdio_txpkt(bus, SDPCM_TEST_CHANNEL, &pkt, 1, TRUE) != BCME_OK) { + bus->pktgen_fail++; + if (bus->pktgen_stop && bus->pktgen_stop == bus->pktgen_fail) + bus->pktgen_count = 0; + } + bus->pktgen_sent++; + + /* Bump length if not fixed, wrap at max */ + if (++bus->pktgen_len > bus->pktgen_maxlen) + bus->pktgen_len = (uint16)bus->pktgen_minlen; + + /* Special case for burst mode: just send one request! */ + if (bus->pktgen_mode == DHD_PKTGEN_RXBURST) + break; + } +} + +static void +dhdsdio_sdtest_set(dhd_bus_t *bus, uint count) +{ + void *pkt; + uint8 *data; + osl_t *osh = bus->dhd->osh; + + /* Allocate the packet */ + if (!(pkt = PKTGET(osh, SDPCM_HDRLEN + SDPCM_TEST_HDRLEN + + SDPCM_TEST_PKT_CNT_FLD_LEN + DHD_SDALIGN, TRUE))) { + DHD_ERROR(("%s: PKTGET failed!\n", __FUNCTION__)); + return; + } + PKTALIGN(osh, pkt, (SDPCM_HDRLEN + SDPCM_TEST_HDRLEN + + SDPCM_TEST_PKT_CNT_FLD_LEN), DHD_SDALIGN); + data = (uint8*)PKTDATA(osh, pkt) + SDPCM_HDRLEN; + + /* Fill in the test header */ + *data++ = SDPCM_TEST_SEND; + *data++ = (count > 0)?TRUE:FALSE; + *data++ = (bus->pktgen_maxlen >> 0); + *data++ = (bus->pktgen_maxlen >> 8); + *data++ = (uint8)(count >> 0); + *data++ = (uint8)(count >> 8); + *data++ = (uint8)(count >> 16); + *data++ = (uint8)(count >> 24); + + /* Send it */ + if (dhdsdio_txpkt(bus, SDPCM_TEST_CHANNEL, &pkt, 1, TRUE) != BCME_OK) + bus->pktgen_fail++; +} + + +static void +dhdsdio_testrcv(dhd_bus_t *bus, void *pkt, uint seq) +{ + osl_t *osh = bus->dhd->osh; + uint8 *data; + uint pktlen; + + uint8 cmd; + uint8 extra; + uint16 len; + uint16 offset; + + /* Check for min length */ + if ((pktlen = PKTLEN(osh, pkt)) < SDPCM_TEST_HDRLEN) { + DHD_ERROR(("dhdsdio_restrcv: toss runt frame, pktlen %d\n", pktlen)); + PKTFREE(osh, pkt, FALSE); + return; + } + + /* Extract header fields */ + data = PKTDATA(osh, pkt); + cmd = *data++; + extra = *data++; + len = *data++; len += *data++ << 8; + DHD_TRACE(("%s:cmd:%d, xtra:%d,len:%d\n", __FUNCTION__, cmd, extra, len)); + /* Check length for relevant commands */ + if (cmd == SDPCM_TEST_DISCARD || cmd == SDPCM_TEST_ECHOREQ || cmd == SDPCM_TEST_ECHORSP) { + if (pktlen != len + SDPCM_TEST_HDRLEN) { + DHD_ERROR(("dhdsdio_testrcv: frame length mismatch, pktlen %d seq %d" + " cmd %d extra %d len %d\n", pktlen, seq, cmd, extra, len)); + PKTFREE(osh, pkt, FALSE); + return; + } + } + + /* Process as per command */ + switch (cmd) { + case SDPCM_TEST_ECHOREQ: + /* Rx->Tx turnaround ok (even on NDIS w/current implementation) */ + *(uint8 *)(PKTDATA(osh, pkt)) = SDPCM_TEST_ECHORSP; + if (dhdsdio_txpkt(bus, SDPCM_TEST_CHANNEL, &pkt, 1, TRUE) == BCME_OK) { + bus->pktgen_sent++; + } else { + bus->pktgen_fail++; + PKTFREE(osh, pkt, FALSE); + } + bus->pktgen_rcvd++; + break; + + case SDPCM_TEST_ECHORSP: + if (bus->ext_loop) { + PKTFREE(osh, pkt, FALSE); + bus->pktgen_rcvd++; + break; + } + + for (offset = 0; offset < len; offset++, data++) { + if (*data != SDPCM_TEST_FILL(offset, extra)) { + DHD_ERROR(("dhdsdio_testrcv: echo data mismatch: " + "offset %d (len %d) expect 0x%02x rcvd 0x%02x\n", + offset, len, SDPCM_TEST_FILL(offset, extra), *data)); + break; + } + } + PKTFREE(osh, pkt, FALSE); + bus->pktgen_rcvd++; + break; + + case SDPCM_TEST_DISCARD: + { + int i = 0; + uint8 *prn = data; + uint8 testval = extra; + for (i = 0; i < len; i++) { + if (*prn != testval) { + DHD_ERROR(("DIErr@Pkt#:%d,Ix:%d, expected:0x%x, got:0x%x\n", + i, bus->pktgen_rcvd_rcvsession, testval, *prn)); + prn++; testval++; + } + } + } + PKTFREE(osh, pkt, FALSE); + bus->pktgen_rcvd++; + break; + + case SDPCM_TEST_BURST: + case SDPCM_TEST_SEND: + default: + DHD_INFO(("dhdsdio_testrcv: unsupported or unknown command, pktlen %d seq %d" + " cmd %d extra %d len %d\n", pktlen, seq, cmd, extra, len)); + PKTFREE(osh, pkt, FALSE); + break; + } + + /* For recv mode, stop at limit (and tell dongle to stop sending) */ + if (bus->pktgen_mode == DHD_PKTGEN_RECV) { + if (bus->pktgen_rcv_state != PKTGEN_RCV_IDLE) { + bus->pktgen_rcvd_rcvsession++; + + if (bus->pktgen_total && + (bus->pktgen_rcvd_rcvsession >= bus->pktgen_total)) { + bus->pktgen_count = 0; + DHD_ERROR(("Pktgen:rcv test complete!\n")); + bus->pktgen_rcv_state = PKTGEN_RCV_IDLE; + dhdsdio_sdtest_set(bus, FALSE); + bus->pktgen_rcvd_rcvsession = 0; + } + } + } +} +#endif /* SDTEST */ + +int dhd_bus_oob_intr_register(dhd_pub_t *dhdp) +{ + int err = 0; + +#if defined(OOB_INTR_ONLY) + OOB_PARAM_IF(!(dhdp->oob_disable)) { + err = bcmsdh_oob_intr_register(dhdp->bus->sdh, dhdsdio_isr, dhdp->bus); + } +#endif + return err; +} + +void dhd_bus_oob_intr_unregister(dhd_pub_t *dhdp) +{ +#if defined(OOB_INTR_ONLY) + OOB_PARAM_IF(!(dhdp->oob_disable)) { + bcmsdh_oob_intr_unregister(dhdp->bus->sdh); + } +#endif +} + +void dhd_bus_oob_intr_set(dhd_pub_t *dhdp, bool enable) +{ +#if defined(OOB_INTR_ONLY) + OOB_PARAM_IF(!(dhdp->oob_disable)) { + bcmsdh_oob_intr_set(dhdp->bus->sdh, enable); + } +#endif +} + +void dhd_bus_dev_pm_stay_awake(dhd_pub_t *dhdpub) +{ + bcmsdh_dev_pm_stay_awake(dhdpub->bus->sdh); +} + +void dhd_bus_dev_pm_relax(dhd_pub_t *dhdpub) +{ + bcmsdh_dev_relax(dhdpub->bus->sdh); +} + +bool dhd_bus_dev_pm_enabled(dhd_pub_t *dhdpub) +{ + bool enabled = FALSE; + + enabled = bcmsdh_dev_pm_enabled(dhdpub->bus->sdh); + return enabled; +} + +extern bool +dhd_bus_watchdog(dhd_pub_t *dhdp) +{ + dhd_bus_t *bus; + + DHD_TIMER(("%s: Enter\n", __FUNCTION__)); + + bus = dhdp->bus; + + if (bus->dhd->dongle_reset) + return FALSE; + + if (bus->dhd->hang_was_sent) { + dhd_os_wd_timer(bus->dhd, 0); + return FALSE; + } + + /* Ignore the timer if simulating bus down */ + if (!SLPAUTO_ENAB(bus) && bus->sleeping) + return FALSE; + + if (dhdp->busstate == DHD_BUS_DOWN) + return FALSE; + + +#if defined(CUSTOMER_IMX) + if (bus->bus_wake_on_resume) { + BUS_WAKE(bus); + bus->bus_wake_on_resume = 0; + } +#endif /* CUSTOMER_IMX */ + + + /* Poll period: check device if appropriate. */ + if (!SLPAUTO_ENAB(bus) && (bus->poll && (++bus->polltick >= bus->pollrate))) { + uint32 intstatus = 0; + + /* Reset poll tick */ + bus->polltick = 0; + + /* Check device if no interrupts */ + if (!bus->intr || (bus->intrcount == bus->lastintrs)) { + + if (!bus->dpc_sched) { + uint8 devpend; + devpend = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_0, + SDIOD_CCCR_INTPEND, NULL); + intstatus = devpend & (INTR_STATUS_FUNC1 | INTR_STATUS_FUNC2); + } + + /* If there is something, make like the ISR and schedule the DPC */ + if (intstatus) { + bus->pollcnt++; + bus->ipend = TRUE; + if (bus->intr) { + bcmsdh_intr_disable(bus->sdh); + } + bus->dpc_sched = TRUE; + dhd_sched_dpc(bus->dhd); + } + } + + /* Update interrupt tracking */ + bus->lastintrs = bus->intrcount; + } + +#ifdef DHD_DEBUG + /* Poll for console output periodically */ + if (dhdp->busstate == DHD_BUS_DATA && dhd_console_ms != 0) { + bus->console.count += dhd_watchdog_ms; + if (bus->console.count >= dhd_console_ms) { + bus->console.count -= dhd_console_ms; + /* Make sure backplane clock is on */ + if (SLPAUTO_ENAB(bus)) + dhdsdio_bussleep(bus, FALSE); + else + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + if (dhdsdio_readconsole(bus) < 0) + dhd_console_ms = 0; /* On error, stop trying */ + } + } +#endif /* DHD_DEBUG */ + +#ifdef SDTEST + /* Generate packets if configured */ + if (bus->pktgen_count && (++bus->pktgen_tick >= bus->pktgen_freq)) { + /* Make sure backplane clock is on */ + if (SLPAUTO_ENAB(bus)) + dhdsdio_bussleep(bus, FALSE); + else + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + bus->pktgen_tick = 0; + dhdsdio_pktgen(bus); + } +#endif + + /* On idle timeout clear activity flag and/or turn off clock */ +#ifdef DHD_USE_IDLECOUNT + if (bus->activity) + bus->activity = FALSE; + else { + bus->idlecount++; + + if ((bus->idletime > 0) && (bus->idlecount >= bus->idletime)) { + DHD_TIMER(("%s: DHD Idle state!!\n", __FUNCTION__)); + if (SLPAUTO_ENAB(bus)) { + if (dhdsdio_bussleep(bus, TRUE) != BCME_BUSY) + dhd_os_wd_timer(bus->dhd, 0); + } else + dhdsdio_clkctl(bus, CLK_NONE, FALSE); + + bus->idlecount = 0; + } + } +#else + if ((bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) { + if (++bus->idlecount >= bus->idletime) { + bus->idlecount = 0; + if (bus->activity) { + bus->activity = FALSE; + if (SLPAUTO_ENAB(bus)) { + if (!bus->readframes) + dhdsdio_bussleep(bus, TRUE); + else + bus->reqbussleep = TRUE; + } + else + dhdsdio_clkctl(bus, CLK_NONE, FALSE); + } + } + } +#endif /* DHD_USE_IDLECOUNT */ + + return bus->ipend; +} + +#ifdef DHD_DEBUG +extern int +dhd_bus_console_in(dhd_pub_t *dhdp, uchar *msg, uint msglen) +{ + dhd_bus_t *bus = dhdp->bus; + uint32 addr, val; + int rv; + void *pkt; + + /* Address could be zero if CONSOLE := 0 in dongle Makefile */ + if (bus->console_addr == 0) + return BCME_UNSUPPORTED; + + /* Exclusive bus access */ + dhd_os_sdlock(bus->dhd); + + /* Don't allow input if dongle is in reset */ + if (bus->dhd->dongle_reset) { + dhd_os_sdunlock(bus->dhd); + return BCME_NOTREADY; + } + + /* Request clock to allow SDIO accesses */ + BUS_WAKE(bus); + /* No pend allowed since txpkt is called later, ht clk has to be on */ + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + + /* Zero cbuf_index */ + addr = bus->console_addr + OFFSETOF(hndrte_cons_t, cbuf_idx); + val = htol32(0); + if ((rv = dhdsdio_membytes(bus, TRUE, addr, (uint8 *)&val, sizeof(val))) < 0) + goto done; + + /* Write message into cbuf */ + addr = bus->console_addr + OFFSETOF(hndrte_cons_t, cbuf); + if ((rv = dhdsdio_membytes(bus, TRUE, addr, (uint8 *)msg, msglen)) < 0) + goto done; + + /* Write length into vcons_in */ + addr = bus->console_addr + OFFSETOF(hndrte_cons_t, vcons_in); + val = htol32(msglen); + if ((rv = dhdsdio_membytes(bus, TRUE, addr, (uint8 *)&val, sizeof(val))) < 0) + goto done; + + /* Bump dongle by sending an empty packet on the event channel. + * sdpcm_sendup (RX) checks for virtual console input. + */ + if ((pkt = PKTGET(bus->dhd->osh, 4 + SDPCM_RESERVE, TRUE)) != NULL) + rv = dhdsdio_txpkt(bus, SDPCM_EVENT_CHANNEL, &pkt, 1, TRUE); + +done: + if ((bus->idletime == DHD_IDLE_IMMEDIATE) && !bus->dpc_sched) { + bus->activity = FALSE; + dhdsdio_clkctl(bus, CLK_NONE, TRUE); + } + + dhd_os_sdunlock(bus->dhd); + + return rv; +} +#endif /* DHD_DEBUG */ + +#ifdef DHD_DEBUG +static void +dhd_dump_cis(uint fn, uint8 *cis) +{ + uint byte, tag, tdata; + DHD_INFO(("Function %d CIS:\n", fn)); + + for (tdata = byte = 0; byte < SBSDIO_CIS_SIZE_LIMIT; byte++) { + if ((byte % 16) == 0) + DHD_INFO((" ")); + DHD_INFO(("%02x ", cis[byte])); + if ((byte % 16) == 15) + DHD_INFO(("\n")); + if (!tdata--) { + tag = cis[byte]; + if (tag == 0xff) + break; + else if (!tag) + tdata = 0; + else if ((byte + 1) < SBSDIO_CIS_SIZE_LIMIT) + tdata = cis[byte + 1] + 1; + else + DHD_INFO(("]")); + } + } + if ((byte % 16) != 15) + DHD_INFO(("\n")); +} +#endif /* DHD_DEBUG */ + +static bool +dhdsdio_chipmatch(uint16 chipid) +{ + if (chipid == BCM4325_CHIP_ID) + return TRUE; + if (chipid == BCM4329_CHIP_ID) + return TRUE; + if (chipid == BCM4315_CHIP_ID) + return TRUE; + if (chipid == BCM4319_CHIP_ID) + return TRUE; + if (chipid == BCM4336_CHIP_ID) + return TRUE; + if (chipid == BCM4330_CHIP_ID) + return TRUE; + if (chipid == BCM43237_CHIP_ID) + return TRUE; + if (chipid == BCM43362_CHIP_ID) + return TRUE; + if (chipid == BCM4314_CHIP_ID) + return TRUE; + if (chipid == BCM43242_CHIP_ID) + return TRUE; + if (chipid == BCM43340_CHIP_ID) + return TRUE; + if (chipid == BCM43341_CHIP_ID) + return TRUE; + if (chipid == BCM43143_CHIP_ID) + return TRUE; + if (chipid == BCM43342_CHIP_ID) + return TRUE; + if (chipid == BCM4334_CHIP_ID) + return TRUE; + if (chipid == BCM43239_CHIP_ID) + return TRUE; + if (chipid == BCM4324_CHIP_ID) + return TRUE; + if (chipid == BCM4335_CHIP_ID) + return TRUE; + if (chipid == BCM4339_CHIP_ID) + return TRUE; + if (chipid == BCM43349_CHIP_ID) + return TRUE; + if (chipid == BCM4345_CHIP_ID) + return TRUE; + if (chipid == BCM4350_CHIP_ID) + return TRUE; + if (chipid == BCM4354_CHIP_ID) + return TRUE; + if (chipid == BCM4356_CHIP_ID) + return TRUE; + if (chipid == BCM43430_CHIP_ID) + return TRUE; + return FALSE; +} + +static void * +dhdsdio_probe(uint16 venid, uint16 devid, uint16 bus_no, uint16 slot, + uint16 func, uint bustype, void *regsva, osl_t * osh, void *sdh) +{ + int ret; + dhd_bus_t *bus; + + + /* Init global variables at run-time, not as part of the declaration. + * This is required to support init/de-init of the driver. Initialization + * of globals as part of the declaration results in non-deterministic + * behavior since the value of the globals may be different on the + * first time that the driver is initialized vs subsequent initializations. + */ + dhd_txbound = DHD_TXBOUND; + dhd_rxbound = DHD_RXBOUND; + dhd_alignctl = TRUE; + sd1idle = TRUE; + dhd_readahead = TRUE; + retrydata = FALSE; + + dhd_doflow = FALSE; + dhd_dongle_ramsize = 0; + dhd_txminmax = DHD_TXMINMAX; + + forcealign = TRUE; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + DHD_INFO(("%s: venid 0x%04x devid 0x%04x\n", __FUNCTION__, venid, devid)); + + /* We make assumptions about address window mappings */ + ASSERT((uintptr)regsva == SI_ENUM_BASE); + + /* BCMSDH passes venid and devid based on CIS parsing -- but low-power start + * means early parse could fail, so here we should get either an ID + * we recognize OR (-1) indicating we must request power first. + */ + /* Check the Vendor ID */ + switch (venid) { + case 0x0000: + case VENDOR_BROADCOM: + break; + default: + DHD_ERROR(("%s: unknown vendor: 0x%04x\n", + __FUNCTION__, venid)); + goto forcereturn; + } + + /* Check the Device ID and make sure it's one that we support */ + switch (devid) { + case BCM4325_D11DUAL_ID: /* 4325 802.11a/g id */ + case BCM4325_D11G_ID: /* 4325 802.11g 2.4Ghz band id */ + case BCM4325_D11A_ID: /* 4325 802.11a 5Ghz band id */ + DHD_INFO(("%s: found 4325 Dongle\n", __FUNCTION__)); + break; + case BCM4329_D11N_ID: /* 4329 802.11n dualband device */ + case BCM4329_D11N2G_ID: /* 4329 802.11n 2.4G device */ + case BCM4329_D11N5G_ID: /* 4329 802.11n 5G device */ + case 0x4329: + DHD_INFO(("%s: found 4329 Dongle\n", __FUNCTION__)); + break; + case BCM4315_D11DUAL_ID: /* 4315 802.11a/g id */ + case BCM4315_D11G_ID: /* 4315 802.11g id */ + case BCM4315_D11A_ID: /* 4315 802.11a id */ + DHD_INFO(("%s: found 4315 Dongle\n", __FUNCTION__)); + break; + case BCM4319_D11N_ID: /* 4319 802.11n id */ + case BCM4319_D11N2G_ID: /* 4319 802.11n2g id */ + case BCM4319_D11N5G_ID: /* 4319 802.11n5g id */ + DHD_INFO(("%s: found 4319 Dongle\n", __FUNCTION__)); + break; + case 0: + DHD_INFO(("%s: allow device id 0, will check chip internals\n", + __FUNCTION__)); + break; + + default: + DHD_ERROR(("%s: skipping 0x%04x/0x%04x, not a dongle\n", + __FUNCTION__, venid, devid)); + goto forcereturn; + } + + if (osh == NULL) { + DHD_ERROR(("%s: osh is NULL!\n", __FUNCTION__)); + goto forcereturn; + } + + /* Allocate private bus interface state */ + if (!(bus = MALLOC(osh, sizeof(dhd_bus_t)))) { + DHD_ERROR(("%s: MALLOC of dhd_bus_t failed\n", __FUNCTION__)); + goto fail; + } + bzero(bus, sizeof(dhd_bus_t)); + bus->sdh = sdh; + bus->cl_devid = (uint16)devid; + bus->bus = DHD_BUS; + bus->bus_num = bus_no; + bus->slot_num = slot; + bus->tx_seq = SDPCM_SEQUENCE_WRAP - 1; + bus->usebufpool = FALSE; /* Use bufpool if allocated, else use locally malloced rxbuf */ + +#if defined(SUPPORT_P2P_GO_PS) + init_waitqueue_head(&bus->bus_sleep); +#endif /* LINUX && (SUPPORT_P2P_GO_PS || !OEM_ANDROID) */ + + /* attempt to attach to the dongle */ + if (!(dhdsdio_probe_attach(bus, osh, sdh, regsva, devid))) { + DHD_ERROR(("%s: dhdsdio_probe_attach failed\n", __FUNCTION__)); + goto fail; + } + + /* Attach to the dhd/OS/network interface */ + if (!(bus->dhd = dhd_attach(osh, bus, SDPCM_RESERVE))) { + DHD_ERROR(("%s: dhd_attach failed\n", __FUNCTION__)); + goto fail; + } + + /* Allocate buffers */ + if (!(dhdsdio_probe_malloc(bus, osh, sdh))) { + DHD_ERROR(("%s: dhdsdio_probe_malloc failed\n", __FUNCTION__)); + goto fail; + } + + if (!(dhdsdio_probe_init(bus, osh, sdh))) { + DHD_ERROR(("%s: dhdsdio_probe_init failed\n", __FUNCTION__)); + goto fail; + } + + if (bus->intr) { + /* Register interrupt callback, but mask it (not operational yet). */ + DHD_INTR(("%s: disable SDIO interrupts (not interested yet)\n", __FUNCTION__)); + bcmsdh_intr_disable(sdh); + if ((ret = bcmsdh_intr_reg(sdh, dhdsdio_isr, bus)) != 0) { + DHD_ERROR(("%s: FAILED: bcmsdh_intr_reg returned %d\n", + __FUNCTION__, ret)); + goto fail; + } + DHD_INTR(("%s: registered SDIO interrupt function ok\n", __FUNCTION__)); + } else { + DHD_INFO(("%s: SDIO interrupt function is NOT registered due to polling mode\n", + __FUNCTION__)); + } + + DHD_INFO(("%s: completed!!\n", __FUNCTION__)); + + /* if firmware path present try to download and bring up bus */ + bus->dhd->hang_report = TRUE; + if (dhd_download_fw_on_driverload) { + if ((ret = dhd_bus_start(bus->dhd)) != 0) { + DHD_ERROR(("%s: dhd_bus_start failed\n", __FUNCTION__)); + goto fail; + } + } + /* Ok, have the per-port tell the stack we're open for business */ + if (dhd_register_if(bus->dhd, 0, TRUE) != 0) { + DHD_ERROR(("%s: Net attach failed!!\n", __FUNCTION__)); + goto fail; + } + + + return bus; + +fail: + dhdsdio_release(bus, osh); + +forcereturn: + + return NULL; +} + +static bool +dhdsdio_probe_attach(struct dhd_bus *bus, osl_t *osh, void *sdh, void *regsva, + uint16 devid) +{ + int err = 0; + uint8 clkctl = 0; + + bus->alp_only = TRUE; + bus->sih = NULL; + + /* Return the window to backplane enumeration space for core access */ + if (dhdsdio_set_siaddr_window(bus, SI_ENUM_BASE)) { + DHD_ERROR(("%s: FAILED to return to SI_ENUM_BASE\n", __FUNCTION__)); + } + + + /* Force PLL off until si_attach() programs PLL control regs */ + + + + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, DHD_INIT_CLKCTL1, &err); + if (!err) + clkctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, &err); + + if (err || ((clkctl & ~SBSDIO_AVBITS) != DHD_INIT_CLKCTL1)) { + DHD_ERROR(("dhdsdio_probe: ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n", + err, DHD_INIT_CLKCTL1, clkctl)); + goto fail; + } + +#ifdef DHD_DEBUG + if (DHD_INFO_ON()) { + uint fn, numfn; + uint8 *cis[SDIOD_MAX_IOFUNCS]; + int err = 0; + + numfn = bcmsdh_query_iofnum(sdh); + ASSERT(numfn <= SDIOD_MAX_IOFUNCS); + + /* Make sure ALP is available before trying to read CIS */ + SPINWAIT(((clkctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, + SBSDIO_FUNC1_CHIPCLKCSR, NULL)), + !SBSDIO_ALPAV(clkctl)), PMU_MAX_TRANSITION_DLY); + + /* Now request ALP be put on the bus */ + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, + DHD_INIT_CLKCTL2, &err); + OSL_DELAY(65); + + for (fn = 0; fn <= numfn; fn++) { + if (!(cis[fn] = MALLOC(osh, SBSDIO_CIS_SIZE_LIMIT))) { + DHD_INFO(("dhdsdio_probe: fn %d cis malloc failed\n", fn)); + break; + } + bzero(cis[fn], SBSDIO_CIS_SIZE_LIMIT); + + if ((err = bcmsdh_cis_read(sdh, fn, cis[fn], SBSDIO_CIS_SIZE_LIMIT))) { + DHD_INFO(("dhdsdio_probe: fn %d cis read err %d\n", fn, err)); + MFREE(osh, cis[fn], SBSDIO_CIS_SIZE_LIMIT); + break; + } + dhd_dump_cis(fn, cis[fn]); + } + + while (fn-- > 0) { + ASSERT(cis[fn]); + MFREE(osh, cis[fn], SBSDIO_CIS_SIZE_LIMIT); + } + + if (err) { + DHD_ERROR(("dhdsdio_probe: failure reading or parsing CIS\n")); + goto fail; + } + } +#endif /* DHD_DEBUG */ + + /* si_attach() will provide an SI handle and scan the backplane */ + if (!(bus->sih = si_attach((uint)devid, osh, regsva, DHD_BUS, sdh, + &bus->vars, &bus->varsz))) { + DHD_ERROR(("%s: si_attach failed!\n", __FUNCTION__)); + goto fail; + } + +#ifdef DHD_DEBUG + DHD_ERROR(("F1 signature OK, socitype:0x%x chip:0x%4x rev:0x%x pkg:0x%x\n", + bus->sih->socitype, bus->sih->chip, bus->sih->chiprev, bus->sih->chippkg)); +#endif /* DHD_DEBUG */ + + + bcmsdh_chipinfo(sdh, bus->sih->chip, bus->sih->chiprev); + + if (!dhdsdio_chipmatch((uint16)bus->sih->chip)) { + DHD_ERROR(("%s: unsupported chip: 0x%04x\n", + __FUNCTION__, bus->sih->chip)); + goto fail; + } + + if (bus->sih->buscorerev >= 12) + dhdsdio_clk_kso_init(bus); + else + bus->kso = TRUE; + + if (CST4330_CHIPMODE_SDIOD(bus->sih->chipst)) { + } + + si_sdiod_drive_strength_init(bus->sih, osh, dhd_sdiod_drive_strength); + + + /* Get info on the ARM and SOCRAM cores... */ + if (!DHD_NOPMU(bus)) { + if ((si_setcore(bus->sih, ARM7S_CORE_ID, 0)) || + (si_setcore(bus->sih, ARMCM3_CORE_ID, 0)) || + (si_setcore(bus->sih, ARMCR4_CORE_ID, 0))) { + bus->armrev = si_corerev(bus->sih); + } else { + DHD_ERROR(("%s: failed to find ARM core!\n", __FUNCTION__)); + goto fail; + } + + if (!si_setcore(bus->sih, ARMCR4_CORE_ID, 0)) { + if (!(bus->orig_ramsize = si_socram_size(bus->sih))) { + DHD_ERROR(("%s: failed to find SOCRAM memory!\n", __FUNCTION__)); + goto fail; + } + } else { + /* cr4 has a different way to find the RAM size from TCM's */ + if (!(bus->orig_ramsize = si_tcm_size(bus->sih))) { + DHD_ERROR(("%s: failed to find CR4-TCM memory!\n", __FUNCTION__)); + goto fail; + } + /* also populate base address */ + switch ((uint16)bus->sih->chip) { + case BCM4335_CHIP_ID: + case BCM4339_CHIP_ID: + case BCM43349_CHIP_ID: + bus->dongle_ram_base = CR4_4335_RAM_BASE; + break; + case BCM4350_CHIP_ID: + case BCM4354_CHIP_ID: + case BCM4356_CHIP_ID: + bus->dongle_ram_base = CR4_4350_RAM_BASE; + break; + case BCM4360_CHIP_ID: + bus->dongle_ram_base = CR4_4360_RAM_BASE; + break; + case BCM4345_CHIP_ID: + /* RAM base changed from 4345c0 (chiprev=6) onwards */ + bus->dongle_ram_base = (bus->sih->chiprev < 6) + ? CR4_4345_LT_C0_RAM_BASE : CR4_4345_GE_C0_RAM_BASE; + break; + default: + bus->dongle_ram_base = 0; + DHD_ERROR(("%s: WARNING: Using default ram base at 0x%x\n", + __FUNCTION__, bus->dongle_ram_base)); + } + } + bus->ramsize = bus->orig_ramsize; + if (dhd_dongle_ramsize) + dhd_dongle_setramsize(bus, dhd_dongle_ramsize); + + DHD_ERROR(("DHD: dongle ram size is set to %d(orig %d) at 0x%x\n", + bus->ramsize, bus->orig_ramsize, bus->dongle_ram_base)); + + bus->srmemsize = si_socram_srmem_size(bus->sih); + } + + /* ...but normally deal with the SDPCMDEV core */ + if (!(bus->regs = si_setcore(bus->sih, PCMCIA_CORE_ID, 0)) && + !(bus->regs = si_setcore(bus->sih, SDIOD_CORE_ID, 0))) { + DHD_ERROR(("%s: failed to find SDIODEV core!\n", __FUNCTION__)); + goto fail; + } + bus->sdpcmrev = si_corerev(bus->sih); + + /* Set core control so an SDIO reset does a backplane reset */ + OR_REG(osh, &bus->regs->corecontrol, CC_BPRESEN); + bus->rxint_mode = SDIO_DEVICE_HMB_RXINT; + + if ((bus->sih->buscoretype == SDIOD_CORE_ID) && (bus->sdpcmrev >= 4) && + (bus->rxint_mode == SDIO_DEVICE_RXDATAINT_MODE_1)) + { + uint32 val; + + val = R_REG(osh, &bus->regs->corecontrol); + val &= ~CC_XMTDATAAVAIL_MODE; + val |= CC_XMTDATAAVAIL_CTRL; + W_REG(osh, &bus->regs->corecontrol, val); + } + + + pktq_init(&bus->txq, (PRIOMASK + 1), QLEN); + + /* Locate an appropriately-aligned portion of hdrbuf */ + bus->rxhdr = (uint8 *)ROUNDUP((uintptr)&bus->hdrbuf[0], DHD_SDALIGN); + + /* Set the poll and/or interrupt flags */ + bus->intr = (bool)dhd_intr; + if ((bus->poll = (bool)dhd_poll)) + bus->pollrate = 1; + + /* Setting default Glom size */ + bus->txglomsize = SDPCM_DEFGLOM_SIZE; + + return TRUE; + +fail: + if (bus->sih != NULL) { + si_detach(bus->sih); + bus->sih = NULL; + } + return FALSE; +} + +static bool +dhdsdio_probe_malloc(dhd_bus_t *bus, osl_t *osh, void *sdh) +{ + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + if (bus->dhd->maxctl) { + bus->rxblen = ROUNDUP((bus->dhd->maxctl+SDPCM_HDRLEN), ALIGNMENT) + DHD_SDALIGN; + if (!(bus->rxbuf = DHD_OS_PREALLOC(bus->dhd, DHD_PREALLOC_RXBUF, bus->rxblen))) { + DHD_ERROR(("%s: MALLOC of %d-byte rxbuf failed\n", + __FUNCTION__, bus->rxblen)); + goto fail; + } + } + /* Allocate buffer to receive glomed packet */ + if (!(bus->databuf = DHD_OS_PREALLOC(bus->dhd, DHD_PREALLOC_DATABUF, MAX_DATA_BUF))) { + DHD_ERROR(("%s: MALLOC of %d-byte databuf failed\n", + __FUNCTION__, MAX_DATA_BUF)); + /* release rxbuf which was already located as above */ + if (bus->rxbuf) { + DHD_OS_PREFREE(bus->dhd, DHD_PREALLOC_RXBUF, bus->rxbuf, bus->rxblen); + bus->rxbuf = NULL; + } + goto fail; + } + + /* Align the buffer */ + if ((uintptr)bus->databuf % DHD_SDALIGN) + bus->dataptr = bus->databuf + (DHD_SDALIGN - ((uintptr)bus->databuf % DHD_SDALIGN)); + else + bus->dataptr = bus->databuf; + + return TRUE; + +fail: + return FALSE; +} + +static bool +dhdsdio_probe_init(dhd_bus_t *bus, osl_t *osh, void *sdh) +{ + int32 fnum; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + bus->_srenab = FALSE; + +#ifdef SDTEST + dhdsdio_pktgen_init(bus); +#endif /* SDTEST */ + + /* Disable F2 to clear any intermediate frame state on the dongle */ + bcmsdh_cfg_write(sdh, SDIO_FUNC_0, SDIOD_CCCR_IOEN, SDIO_FUNC_ENABLE_1, NULL); + + bus->dhd->busstate = DHD_BUS_DOWN; + bus->sleeping = FALSE; + bus->rxflow = FALSE; + bus->prev_rxlim_hit = 0; + + /* Done with backplane-dependent accesses, can drop clock... */ + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); + + /* ...and initialize clock/power states */ + bus->clkstate = CLK_SDONLY; + bus->idletime = (int32)dhd_idletime; + bus->idleclock = DHD_IDLE_ACTIVE; + + /* Query the SD clock speed */ + if (bcmsdh_iovar_op(sdh, "sd_divisor", NULL, 0, + &bus->sd_divisor, sizeof(int32), FALSE) != BCME_OK) { + DHD_ERROR(("%s: fail on %s get\n", __FUNCTION__, "sd_divisor")); + bus->sd_divisor = -1; + } else { + DHD_INFO(("%s: Initial value for %s is %d\n", + __FUNCTION__, "sd_divisor", bus->sd_divisor)); + } + + /* Query the SD bus mode */ + if (bcmsdh_iovar_op(sdh, "sd_mode", NULL, 0, + &bus->sd_mode, sizeof(int32), FALSE) != BCME_OK) { + DHD_ERROR(("%s: fail on %s get\n", __FUNCTION__, "sd_mode")); + bus->sd_mode = -1; + } else { + DHD_INFO(("%s: Initial value for %s is %d\n", + __FUNCTION__, "sd_mode", bus->sd_mode)); + } + + /* Query the F2 block size, set roundup accordingly */ + fnum = 2; + if (bcmsdh_iovar_op(sdh, "sd_blocksize", &fnum, sizeof(int32), + &bus->blocksize, sizeof(int32), FALSE) != BCME_OK) { + bus->blocksize = 0; + DHD_ERROR(("%s: fail on %s get\n", __FUNCTION__, "sd_blocksize")); + } else { + DHD_INFO(("%s: Initial value for %s is %d\n", + __FUNCTION__, "sd_blocksize", bus->blocksize)); + + dhdsdio_tune_fifoparam(bus); + } + bus->roundup = MIN(max_roundup, bus->blocksize); + + if (bus->pad_pkt) + PKTFREE(osh, bus->pad_pkt, FALSE); + bus->pad_pkt = PKTGET(osh, SDIO_MAX_BLOCK_SIZE, FALSE); + if (bus->pad_pkt == NULL) + DHD_ERROR(("failed to allocate padding packet\n")); + else { + int alignment_offset = 0; + uintptr pktprt = (uintptr)PKTDATA(osh, bus->pad_pkt); + if (!(pktprt&1) && (pktprt = (pktprt % DHD_SDALIGN))) + PKTPUSH(osh, bus->pad_pkt, alignment_offset); + PKTSETNEXT(osh, bus->pad_pkt, NULL); + } + + + /* Query if bus module supports packet chaining, default to use if supported */ + if (bcmsdh_iovar_op(sdh, "sd_rxchain", NULL, 0, + &bus->sd_rxchain, sizeof(int32), FALSE) != BCME_OK) { + bus->sd_rxchain = FALSE; + } else { + DHD_INFO(("%s: bus module (through bcmsdh API) %s chaining\n", + __FUNCTION__, (bus->sd_rxchain ? "supports" : "does not support"))); + } + bus->use_rxchain = (bool)bus->sd_rxchain; + bus->txinrx_thres = CUSTOM_TXINRX_THRES; + /* TX first in dhdsdio_readframes() */ + bus->dotxinrx = TRUE; + + return TRUE; +} + +int +dhd_bus_download_firmware(struct dhd_bus *bus, osl_t *osh, + char *pfw_path, char *pnv_path) +{ + int ret; + + bus->fw_path = pfw_path; + bus->nv_path = pnv_path; + + ret = dhdsdio_download_firmware(bus, osh, bus->sdh); + + + return ret; +} + +static int +dhdsdio_download_firmware(struct dhd_bus *bus, osl_t *osh, void *sdh) +{ + int ret; + + + DHD_TRACE_HW4(("%s: firmware path=%s, nvram path=%s\n", + __FUNCTION__, bus->fw_path, bus->nv_path)); + DHD_OS_WAKE_LOCK(bus->dhd); + + /* Download the firmware */ + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + + ret = _dhdsdio_download_firmware(bus); + + dhdsdio_clkctl(bus, CLK_SDONLY, FALSE); + + DHD_OS_WAKE_UNLOCK(bus->dhd); + return ret; +} + +/* Detach and free everything */ +static void +dhdsdio_release(dhd_bus_t *bus, osl_t *osh) +{ + bool dongle_isolation = FALSE; + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + if (bus) { + ASSERT(osh); + + if (bus->dhd) { + dongle_isolation = bus->dhd->dongle_isolation; + dhd_detach(bus->dhd); + } + + /* De-register interrupt handler */ + bcmsdh_intr_disable(bus->sdh); + bcmsdh_intr_dereg(bus->sdh); + + if (bus->dhd) { + dhdsdio_release_dongle(bus, osh, dongle_isolation, TRUE); + dhd_free(bus->dhd); + bus->dhd = NULL; + } + + dhdsdio_release_malloc(bus, osh); + +#ifdef DHD_DEBUG + if (bus->console.buf != NULL) + MFREE(osh, bus->console.buf, bus->console.bufsize); +#endif + + if (bus->pad_pkt) + PKTFREE(osh, bus->pad_pkt, FALSE); + + + MFREE(osh, bus, sizeof(dhd_bus_t)); + } + + DHD_TRACE(("%s: Disconnected\n", __FUNCTION__)); +} + +static void +dhdsdio_release_malloc(dhd_bus_t *bus, osl_t *osh) +{ + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + if (bus->dhd && bus->dhd->dongle_reset) + return; + + if (bus->rxbuf) { +#ifndef CONFIG_DHD_USE_STATIC_BUF + MFREE(osh, bus->rxbuf, bus->rxblen); +#endif + bus->rxctl = bus->rxbuf = NULL; + bus->rxlen = 0; + } + + if (bus->databuf) { +#ifndef CONFIG_DHD_USE_STATIC_BUF + MFREE(osh, bus->databuf, MAX_DATA_BUF); +#endif + bus->databuf = NULL; + } + + if (bus->vars && bus->varsz) { + MFREE(osh, bus->vars, bus->varsz); + bus->vars = NULL; + } + +} + + +static void +dhdsdio_release_dongle(dhd_bus_t *bus, osl_t *osh, bool dongle_isolation, bool reset_flag) +{ + DHD_TRACE(("%s: Enter bus->dhd %p bus->dhd->dongle_reset %d \n", __FUNCTION__, + bus->dhd, bus->dhd->dongle_reset)); + + if ((bus->dhd && bus->dhd->dongle_reset) && reset_flag) + return; + + if (bus->sih) { +#if !defined(BCMLXSDMMC) + if (bus->dhd) { + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + } + if (KSO_ENAB(bus) && (dongle_isolation == FALSE)) + si_watchdog(bus->sih, 4); +#endif /* !defined(BCMLXSDMMC) */ + if (bus->dhd) { + dhdsdio_clkctl(bus, CLK_NONE, FALSE); + } + si_detach(bus->sih); + bus->sih = NULL; + if (bus->vars && bus->varsz) + MFREE(osh, bus->vars, bus->varsz); + bus->vars = NULL; + } + + DHD_TRACE(("%s: Disconnected\n", __FUNCTION__)); +} + +static void +dhdsdio_disconnect(void *ptr) +{ + dhd_bus_t *bus = (dhd_bus_t *)ptr; + + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + + + if (bus) { + ASSERT(bus->dhd); + dhdsdio_release(bus, bus->dhd->osh); + } + + + + DHD_TRACE(("%s: Disconnected\n", __FUNCTION__)); +} + +static int +dhdsdio_suspend(void *context) +{ + int ret = 0; + + dhd_bus_t *bus = (dhd_bus_t*)context; +#if defined(SUPPORT_P2P_GO_PS) + int wait_time = 0; + + if (bus->idletime > 0) { + wait_time = 2 * (msecs_to_jiffies(bus->idletime * dhd_watchdog_ms)); + } +#endif /* SUPPORT_P2P_GO_PS || !OEM_ANDROID */ + ret = dhd_os_check_wakelock(bus->dhd); +#if defined(SUPPORT_P2P_GO_PS) + /* Sometimes DHD enters into suspend state when bus is still awake due + * to absence of wake locks on Non-Android platforms, so perform bus + * sleep status check using bus_sleep event to prevent dhd entering + * into suspend state when bus is still awake. + */ + if ((!ret) && (bus->dhd->up) && (bus->dhd->op_mode != DHD_FLAG_HOSTAP_MODE)) { + if (wait_event_timeout(bus->bus_sleep, bus->sleeping, wait_time) == 0) { + if (!bus->sleeping) { + DHD_ERROR(("%s: cannot suspend because bus is awake\n", + __FUNCTION__)); + return -EBUSY; + } + } + } +#endif /* SUPPORT_P2P_GO_PS || !OEM_ANDROID */ + return ret; +} + +static int +dhdsdio_resume(void *context) +{ + +#if defined(OOB_INTR_ONLY) || defined(CUSTOMER_IMX) + dhd_bus_t *bus = (dhd_bus_t*)context; +#endif /* defined(OOB_INTR_ONLY)||defined(BCMSPI_ANDROID)|| + * defined(CUSTOMER_IMX) */ + +#if defined(OOB_INTR_ONLY) + + OOB_PARAM_IF(!(bus->dhd->oob_disable)) { + if (dhd_os_check_if_up(bus->dhd)) + bcmsdh_oob_intr_set(bus->sdh, TRUE); + } +#endif + +#if defined(CUSTOMER_IMX) + bus->bus_wake_on_resume = 1; + dhd_os_wd_timer(bus->dhd, 1000); +#endif /* CUSTOMER_IMX */ + + return 0; +} + + +/* Register/Unregister functions are called by the main DHD entry + * point (e.g. module insertion) to link with the bus driver, in + * order to look for or await the device. + */ + +static bcmsdh_driver_t dhd_sdio = { + dhdsdio_probe, + dhdsdio_disconnect, + dhdsdio_suspend, + dhdsdio_resume +}; + +int +dhd_bus_register(void) +{ + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + return bcmsdh_register(&dhd_sdio); +} + +void +dhd_bus_unregister(void) +{ + DHD_TRACE(("%s: Enter\n", __FUNCTION__)); + + bcmsdh_unregister(); +} + +#if defined(BCMLXSDMMC) +/* Register a dummy SDIO client driver in order to be notified of new SDIO device */ +int dhd_bus_reg_sdio_notify(void* semaphore) +{ + return bcmsdh_reg_sdio_notify(semaphore); +} + +void dhd_bus_unreg_sdio_notify(void) +{ + bcmsdh_unreg_sdio_notify(); +} +#endif /* defined(BCMLXSDMMC) */ + +#ifdef BCMEMBEDIMAGE +static int +dhdsdio_download_code_array(struct dhd_bus *bus) +{ + int bcmerror = -1; + int offset = 0; + unsigned char *ularray = NULL; + + DHD_INFO(("%s: download embedded firmware...\n", __FUNCTION__)); + + /* Download image */ + while ((offset + MEMBLOCK) < sizeof(dlarray)) { + /* check if CR4 */ + if (si_setcore(bus->sih, ARMCR4_CORE_ID, 0)) { + /* if address is 0, store the reset instruction to be written in 0 */ + + if (offset == 0) { + bus->resetinstr = *(((uint32*)dlarray)); + /* Add start of RAM address to the address given by user */ + offset += bus->dongle_ram_base; + } + } + + bcmerror = dhdsdio_membytes(bus, TRUE, offset, + (uint8 *) (dlarray + offset), MEMBLOCK); + if (bcmerror) { + DHD_ERROR(("%s: error %d on writing %d membytes at 0x%08x\n", + __FUNCTION__, bcmerror, MEMBLOCK, offset)); + goto err; + } + + offset += MEMBLOCK; + } + + if (offset < sizeof(dlarray)) { + bcmerror = dhdsdio_membytes(bus, TRUE, offset, + (uint8 *) (dlarray + offset), sizeof(dlarray) - offset); + if (bcmerror) { + DHD_ERROR(("%s: error %d on writing %d membytes at 0x%08x\n", + __FUNCTION__, bcmerror, sizeof(dlarray) - offset, offset)); + goto err; + } + } + +#ifdef DHD_DEBUG + /* Upload and compare the downloaded code */ + { + ularray = MALLOC(bus->dhd->osh, bus->ramsize); + /* Upload image to verify downloaded contents. */ + offset = 0; + memset(ularray, 0xaa, bus->ramsize); + while ((offset + MEMBLOCK) < sizeof(dlarray)) { + bcmerror = dhdsdio_membytes(bus, FALSE, offset, ularray + offset, MEMBLOCK); + if (bcmerror) { + DHD_ERROR(("%s: error %d on reading %d membytes at 0x%08x\n", + __FUNCTION__, bcmerror, MEMBLOCK, offset)); + goto err; + } + + offset += MEMBLOCK; + } + + if (offset < sizeof(dlarray)) { + bcmerror = dhdsdio_membytes(bus, FALSE, offset, + ularray + offset, sizeof(dlarray) - offset); + if (bcmerror) { + DHD_ERROR(("%s: error %d on reading %d membytes at 0x%08x\n", + __FUNCTION__, bcmerror, sizeof(dlarray) - offset, offset)); + goto err; + } + } + + if (memcmp(dlarray, ularray, sizeof(dlarray))) { + DHD_ERROR(("%s: Downloaded image is corrupted (%s, %s, %s).\n", + __FUNCTION__, dlimagename, dlimagever, dlimagedate)); + goto err; + } else + DHD_ERROR(("%s: Download, Upload and compare succeeded (%s, %s, %s).\n", + __FUNCTION__, dlimagename, dlimagever, dlimagedate)); + + } +#endif /* DHD_DEBUG */ + +err: + if (ularray) + MFREE(bus->dhd->osh, ularray, bus->ramsize); + return bcmerror; +} +#endif /* BCMEMBEDIMAGE */ + +static int +dhdsdio_download_code_file(struct dhd_bus *bus, char *pfw_path) +{ + int bcmerror = -1; + int offset = 0; + int len; + void *image = NULL; + uint8 *memblock = NULL, *memptr; + + DHD_INFO(("%s: download firmware %s\n", __FUNCTION__, pfw_path)); + + image = dhd_os_open_image(pfw_path); + if (image == NULL) + goto err; + + memptr = memblock = MALLOC(bus->dhd->osh, MEMBLOCK + DHD_SDALIGN); + if (memblock == NULL) { + DHD_ERROR(("%s: Failed to allocate memory %d bytes\n", __FUNCTION__, MEMBLOCK)); + goto err; + } + if ((uint32)(uintptr)memblock % DHD_SDALIGN) + memptr += (DHD_SDALIGN - ((uint32)(uintptr)memblock % DHD_SDALIGN)); + + /* Download image */ + while ((len = dhd_os_get_image_block((char*)memptr, MEMBLOCK, image))) { + if (len < 0) { + DHD_ERROR(("%s: dhd_os_get_image_block failed (%d)\n", __FUNCTION__, len)); + bcmerror = BCME_ERROR; + goto err; + } + /* check if CR4 */ + if (si_setcore(bus->sih, ARMCR4_CORE_ID, 0)) { + /* if address is 0, store the reset instruction to be written in 0 */ + + if (offset == 0) { + bus->resetinstr = *(((uint32*)memptr)); + /* Add start of RAM address to the address given by user */ + offset += bus->dongle_ram_base; + } + } + + bcmerror = dhdsdio_membytes(bus, TRUE, offset, memptr, len); + if (bcmerror) { + DHD_ERROR(("%s: error %d on writing %d membytes at 0x%08x\n", + __FUNCTION__, bcmerror, MEMBLOCK, offset)); + goto err; + } + + offset += MEMBLOCK; + } + +err: + if (memblock) + MFREE(bus->dhd->osh, memblock, MEMBLOCK + DHD_SDALIGN); + + if (image) + dhd_os_close_image(image); + + return bcmerror; +} + +/* + EXAMPLE: nvram_array + nvram_arry format: + name=value + Use carriage return at the end of each assignment, and an empty string with + carriage return at the end of array. + + For example: + unsigned char nvram_array[] = {"name1=value1\n", "name2=value2\n", "\n"}; + Hex values start with 0x, and mac addr format: xx:xx:xx:xx:xx:xx. + + Search "EXAMPLE: nvram_array" to see how the array is activated. +*/ + +void +dhd_bus_set_nvram_params(struct dhd_bus * bus, const char *nvram_params) +{ + bus->nvram_params = nvram_params; +} + +static int +dhdsdio_download_nvram(struct dhd_bus *bus) +{ + int bcmerror = -1; + uint len; + void * image = NULL; + char * memblock = NULL; + char *bufp; + char *pnv_path; + bool nvram_file_exists; + + pnv_path = bus->nv_path; + + nvram_file_exists = ((pnv_path != NULL) && (pnv_path[0] != '\0')); + if (!nvram_file_exists && (bus->nvram_params == NULL)) + return (0); + + if (nvram_file_exists) { + image = dhd_os_open_image(pnv_path); + if (image == NULL) + goto err; + } + + memblock = MALLOC(bus->dhd->osh, MAX_NVRAMBUF_SIZE); + if (memblock == NULL) { + DHD_ERROR(("%s: Failed to allocate memory %d bytes\n", + __FUNCTION__, MAX_NVRAMBUF_SIZE)); + goto err; + } + + /* Download variables */ + if (nvram_file_exists) { + len = dhd_os_get_image_block(memblock, MAX_NVRAMBUF_SIZE, image); + } + else { + len = strlen(bus->nvram_params); + ASSERT(len <= MAX_NVRAMBUF_SIZE); + memcpy(memblock, bus->nvram_params, len); + } + if (len > 0 && len < MAX_NVRAMBUF_SIZE) { + bufp = (char *)memblock; + bufp[len] = 0; + len = process_nvram_vars(bufp, len); + if (len % 4) { + len += 4 - (len % 4); + } + bufp += len; + *bufp++ = 0; + if (len) + bcmerror = dhdsdio_downloadvars(bus, memblock, len + 1); + if (bcmerror) { + DHD_ERROR(("%s: error downloading vars: %d\n", + __FUNCTION__, bcmerror)); + } + } + else { + DHD_ERROR(("%s: error reading nvram file: %d\n", + __FUNCTION__, len)); + bcmerror = BCME_SDIO_ERROR; + } + +err: + if (memblock) + MFREE(bus->dhd->osh, memblock, MAX_NVRAMBUF_SIZE); + + if (image) + dhd_os_close_image(image); + + return bcmerror; +} + +static int +_dhdsdio_download_firmware(struct dhd_bus *bus) +{ + int bcmerror = -1; + + bool embed = FALSE; /* download embedded firmware */ + bool dlok = FALSE; /* download firmware succeeded */ + + /* Out immediately if no image to download */ + if ((bus->fw_path == NULL) || (bus->fw_path[0] == '\0')) { +#ifdef BCMEMBEDIMAGE + embed = TRUE; +#else + return 0; +#endif + } + + /* Keep arm in reset */ + if (dhdsdio_download_state(bus, TRUE)) { + DHD_ERROR(("%s: error placing ARM core in reset\n", __FUNCTION__)); + goto err; + } + + /* External image takes precedence if specified */ + if ((bus->fw_path != NULL) && (bus->fw_path[0] != '\0')) { + if (dhdsdio_download_code_file(bus, bus->fw_path)) { + DHD_ERROR(("%s: dongle image file download failed\n", __FUNCTION__)); +#ifdef BCMEMBEDIMAGE + embed = TRUE; +#else + goto err; +#endif + } + else { + embed = FALSE; + dlok = TRUE; + } + } + +#ifdef BCMEMBEDIMAGE + if (embed) { + if (dhdsdio_download_code_array(bus)) { + DHD_ERROR(("%s: dongle image array download failed\n", __FUNCTION__)); + goto err; + } + else { + dlok = TRUE; + } + } +#else + BCM_REFERENCE(embed); +#endif + if (!dlok) { + DHD_ERROR(("%s: dongle image download failed\n", __FUNCTION__)); + goto err; + } + + /* EXAMPLE: nvram_array */ + /* If a valid nvram_arry is specified as above, it can be passed down to dongle */ + /* dhd_bus_set_nvram_params(bus, (char *)&nvram_array); */ + + /* External nvram takes precedence if specified */ + if (dhdsdio_download_nvram(bus)) { + DHD_ERROR(("%s: dongle nvram file download failed\n", __FUNCTION__)); + goto err; + } + + /* Take arm out of reset */ + if (dhdsdio_download_state(bus, FALSE)) { + DHD_ERROR(("%s: error getting out of ARM core reset\n", __FUNCTION__)); + goto err; + } + + bcmerror = 0; + +err: + return bcmerror; +} + +static int +dhd_bcmsdh_recv_buf(dhd_bus_t *bus, uint32 addr, uint fn, uint flags, uint8 *buf, uint nbytes, + void *pkt, bcmsdh_cmplt_fn_t complete, void *handle) +{ + int status; + + if (!KSO_ENAB(bus)) { + DHD_ERROR(("%s: Device asleep\n", __FUNCTION__)); + return BCME_NODEVICE; + } + + status = bcmsdh_recv_buf(bus->sdh, addr, fn, flags, buf, nbytes, pkt, complete, handle); + + return status; +} + +static int +dhd_bcmsdh_send_buf(dhd_bus_t *bus, uint32 addr, uint fn, uint flags, uint8 *buf, uint nbytes, + void *pkt, bcmsdh_cmplt_fn_t complete, void *handle, int max_retry) +{ + int ret; + int i = 0; + int retries = 0; + bcmsdh_info_t *sdh; + + if (!KSO_ENAB(bus)) { + DHD_ERROR(("%s: Device asleep\n", __FUNCTION__)); + return BCME_NODEVICE; + } + + sdh = bus->sdh; + do { + ret = bcmsdh_send_buf(bus->sdh, addr, fn, flags, buf, nbytes, + pkt, complete, handle); + + bus->f2txdata++; + ASSERT(ret != BCME_PENDING); + + if (ret == BCME_NODEVICE) { + DHD_ERROR(("%s: Device asleep already\n", __FUNCTION__)); + } else if (ret < 0) { + /* On failure, abort the command and terminate the frame */ + DHD_ERROR(("%s: sdio error %d, abort command and terminate frame.\n", + __FUNCTION__, ret)); + bus->tx_sderrs++; + bus->f1regdata++; + bus->dhd->tx_errors++; + bcmsdh_abort(sdh, SDIO_FUNC_2); + bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_FRAMECTRL, + SFC_WF_TERM, NULL); + for (i = 0; i < READ_FRM_CNT_RETRIES; i++) { + uint8 hi, lo; + hi = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_WFRAMEBCHI, + NULL); + lo = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_WFRAMEBCLO, + NULL); + bus->f1regdata += 2; + if ((hi == 0) && (lo == 0)) + break; + } + } + } while ((ret < 0) && retrydata && ++retries < max_retry); + + return ret; +} + +uint +dhd_bus_chip(struct dhd_bus *bus) +{ + ASSERT(bus->sih != NULL); + return bus->sih->chip; +} + +uint +dhd_bus_chiprev(struct dhd_bus *bus) +{ + ASSERT(bus); + ASSERT(bus->sih != NULL); + return bus->sih->chiprev; +} + +void * +dhd_bus_pub(struct dhd_bus *bus) +{ + return bus->dhd; +} + +void * +dhd_bus_sih(struct dhd_bus *bus) +{ + return (void *)bus->sih; +} + +void * +dhd_bus_txq(struct dhd_bus *bus) +{ + return &bus->txq; +} + +void +dhd_bus_set_dotxinrx(struct dhd_bus *bus, bool val) +{ + bus->dotxinrx = val; +} + +int +dhd_bus_devreset(dhd_pub_t *dhdp, uint8 flag) +{ + int bcmerror = 0; + dhd_bus_t *bus; + + bus = dhdp->bus; + + if (flag == TRUE) { + if (!bus->dhd->dongle_reset) { + dhd_os_sdlock(dhdp); + dhd_os_wd_timer(dhdp, 0); +#if !defined(IGNORE_ETH0_DOWN) + /* Force flow control as protection when stop come before ifconfig_down */ + dhd_txflowcontrol(bus->dhd, ALL_INTERFACES, ON); +#endif /* !defined(IGNORE_ETH0_DOWN) */ + /* Expect app to have torn down any connection before calling */ + /* Stop the bus, disable F2 */ + dhd_bus_stop(bus, FALSE); + +#if defined(OOB_INTR_ONLY) + OOB_PARAM_IF(!(dhdp->oob_disable)) { + /* Clean up any pending IRQ */ + dhd_enable_oob_intr(bus, FALSE); + bcmsdh_oob_intr_set(bus->sdh, FALSE); + bcmsdh_oob_intr_unregister(bus->sdh); + } +#endif + + /* Clean tx/rx buffer pointers, detach from the dongle */ + dhdsdio_release_dongle(bus, bus->dhd->osh, TRUE, TRUE); + + bus->dhd->dongle_reset = TRUE; + bus->dhd->up = FALSE; + dhd_txglom_enable(dhdp, FALSE); + dhd_os_sdunlock(dhdp); + + DHD_TRACE(("%s: WLAN OFF DONE\n", __FUNCTION__)); + /* App can now remove power from device */ + } else + bcmerror = BCME_SDIO_ERROR; + } else { + /* App must have restored power to device before calling */ + + DHD_TRACE(("\n\n%s: == WLAN ON ==\n", __FUNCTION__)); + + if (bus->dhd->dongle_reset) { + /* Turn on WLAN */ + dhd_os_sdlock(dhdp); + /* Reset SD client */ + bcmsdh_reset(bus->sdh); + + /* Attempt to re-attach & download */ + if (dhdsdio_probe_attach(bus, bus->dhd->osh, bus->sdh, + (uint32 *)SI_ENUM_BASE, + bus->cl_devid)) { + /* Attempt to download binary to the dongle */ + if (dhdsdio_probe_init(bus, bus->dhd->osh, bus->sdh) && + dhdsdio_download_firmware(bus, bus->dhd->osh, bus->sdh) >= 0) { + + /* Re-init bus, enable F2 transfer */ + bcmerror = dhd_bus_init((dhd_pub_t *) bus->dhd, FALSE); + if (bcmerror == BCME_OK) { +#if defined(OOB_INTR_ONLY) + OOB_PARAM_IF(!(dhdp->oob_disable)) { + dhd_enable_oob_intr(bus, TRUE); + bcmsdh_oob_intr_register(bus->sdh, + dhdsdio_isr, bus); + bcmsdh_oob_intr_set(bus->sdh, TRUE); + } +#endif + + bus->dhd->dongle_reset = FALSE; + bus->dhd->up = TRUE; + +#if !defined(IGNORE_ETH0_DOWN) + /* Restore flow control */ + dhd_txflowcontrol(bus->dhd, ALL_INTERFACES, OFF); +#endif + dhd_os_wd_timer(dhdp, dhd_watchdog_ms); + + DHD_TRACE(("%s: WLAN ON DONE\n", __FUNCTION__)); + } else { + dhd_bus_stop(bus, FALSE); + dhdsdio_release_dongle(bus, bus->dhd->osh, + TRUE, FALSE); + } + } else { + DHD_ERROR(("%s Failed to download binary to the dongle\n", + __FUNCTION__)); + if (bus->sih != NULL) { + si_detach(bus->sih); + bus->sih = NULL; + } + bcmerror = BCME_SDIO_ERROR; + } + } else + bcmerror = BCME_SDIO_ERROR; + + dhd_os_sdunlock(dhdp); + } else { + bcmerror = BCME_SDIO_ERROR; + DHD_INFO(("%s called when dongle is not in reset\n", + __FUNCTION__)); + DHD_INFO(("Will call dhd_bus_start instead\n")); + dhd_bus_resume(dhdp, 1); + if ((bcmerror = dhd_bus_start(dhdp)) != 0) + DHD_ERROR(("%s: dhd_bus_start fail with %d\n", + __FUNCTION__, bcmerror)); + } + } + return bcmerror; +} + +int dhd_bus_suspend(dhd_pub_t *dhdpub) +{ + return bcmsdh_stop(dhdpub->bus->sdh); +} + +int dhd_bus_resume(dhd_pub_t *dhdpub, int stage) +{ + return bcmsdh_start(dhdpub->bus->sdh, stage); +} + +/* Get Chip ID version */ +uint dhd_bus_chip_id(dhd_pub_t *dhdp) +{ + dhd_bus_t *bus = dhdp->bus; + + return bus->sih->chip; +} + +/* Get Chip Rev ID version */ +uint dhd_bus_chiprev_id(dhd_pub_t *dhdp) +{ + dhd_bus_t *bus = dhdp->bus; + + return bus->sih->chiprev; +} + +/* Get Chip Pkg ID version */ +uint dhd_bus_chippkg_id(dhd_pub_t *dhdp) +{ + dhd_bus_t *bus = dhdp->bus; + + return bus->sih->chippkg; +} + +int dhd_bus_get_ids(struct dhd_bus *bus, uint32 *bus_type, uint32 *bus_num, uint32 *slot_num) +{ + *bus_type = bus->bus; + *bus_num = bus->bus_num; + *slot_num = bus->slot_num; + return 0; +} + +int +dhd_bus_membytes(dhd_pub_t *dhdp, bool set, uint32 address, uint8 *data, uint size) +{ + dhd_bus_t *bus; + + bus = dhdp->bus; + return dhdsdio_membytes(bus, set, address, data, size); +} + + +void +dhd_bus_update_fw_nv_path(struct dhd_bus *bus, char *pfw_path, char *pnv_path) +{ + bus->fw_path = pfw_path; + bus->nv_path = pnv_path; +} + +int +dhd_enableOOB(dhd_pub_t *dhd, bool sleep) +{ + dhd_bus_t *bus = dhd->bus; + sdpcmd_regs_t *regs = bus->regs; + uint retries = 0; + + if (sleep) { + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + /* Tell device to start using OOB wakeup */ + W_SDREG(SMB_USE_OOB, ®s->tosbmailbox, retries); + if (retries > retry_limit) { + DHD_ERROR(("CANNOT SIGNAL CHIP, WILL NOT WAKE UP!!\n")); + return BCME_BUSY; + } + /* Turn off our contribution to the HT clock request */ + dhdsdio_clkctl(bus, CLK_SDONLY, FALSE); + } else { + /* Make sure the controller has the bus up */ + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + + /* Send misc interrupt to indicate OOB not needed */ + W_SDREG(0, ®s->tosbmailboxdata, retries); + if (retries <= retry_limit) + W_SDREG(SMB_DEV_INT, ®s->tosbmailbox, retries); + + if (retries > retry_limit) + DHD_ERROR(("CANNOT SIGNAL CHIP TO CLEAR OOB!!\n")); + + /* Make sure we have SD bus access */ + dhdsdio_clkctl(bus, CLK_SDONLY, FALSE); + } + return BCME_OK; +} + +void +dhd_bus_pktq_flush(dhd_pub_t *dhdp) +{ + dhd_bus_t *bus = dhdp->bus; + bool wlfc_enabled = FALSE; + +#ifdef PROP_TXSTATUS + wlfc_enabled = (dhd_wlfc_cleanup_txq(dhdp, NULL, 0) != WLFC_UNSUPPORTED); +#endif + if (!wlfc_enabled) { +#ifdef DHDTCPACK_SUPPRESS + /* Clean tcp_ack_info_tbl in order to prevent access to flushed pkt, + * when there is a newly coming packet from network stack. + */ + dhd_tcpack_info_tbl_clean(bus->dhd); +#endif /* DHDTCPACK_SUPPRESS */ + /* Clear the data packet queues */ + pktq_flush(dhdp->osh, &bus->txq, TRUE, NULL, 0); + } +} + +int +dhd_sr_config(dhd_pub_t *dhd, bool on) +{ + dhd_bus_t *bus = dhd->bus; + + if (!bus->_srenab) + return -1; + + return dhdsdio_clk_devsleep_iovar(bus, on); +} + +uint16 +dhd_get_chipid(dhd_pub_t *dhd) +{ + dhd_bus_t *bus = dhd->bus; + + if (bus && bus->sih) + return (uint16)bus->sih->chip; + else + return 0; +} + +#ifdef DEBUGGER +uint32 dhd_sdio_reg_read(void *h, uint32 addr) +{ + uint32 rval; + struct dhd_bus *bus = (struct dhd_bus *) h; + + dhd_os_sdlock(bus->dhd); + + BUS_WAKE(bus); + + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + + rval = bcmsdh_reg_read(bus->sdh, addr, 4); + + dhd_os_sdunlock(bus->dhd); + + return rval; +} + +void dhd_sdio_reg_write(void *h, uint32 addr, uint32 val) +{ + struct dhd_bus *bus = (struct dhd_bus *) h; + + dhd_os_sdlock(bus->dhd); + + BUS_WAKE(bus); + + dhdsdio_clkctl(bus, CLK_AVAIL, FALSE); + + bcmsdh_reg_write(bus->sdh, addr, 4, val); + + dhd_os_sdunlock(bus->dhd); +} +#endif /* DEBUGGER */ + + +#ifdef OOB_PARAM +uint +dhd_get_oob_disable(struct dhd_bus *bus) +{ + return bus->dhd->oob_disable; +} +#endif /* OOB_PARAM */ |