diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6sx-sdb.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6sx-sdb.dts | 133 |
1 files changed, 42 insertions, 91 deletions
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index d71da30c9cff..ca7e4542681a 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -10,101 +10,40 @@ / { model = "Freescale i.MX6 SoloX SDB RevB Board"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - pmic: pfuze100@08 { - compatible = "fsl,pfuze200"; - reg = <0x08>; - - regulators { - sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3b_reg: sw3b { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-always-on; - }; - vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + regulators { + /* Transceiver EN/STBY is active low on RevB board */ + reg_can_stby: regulator@10 { + gpio = <&gpio4 27 GPIO_ACTIVE_LOW>; + }; + }; +}; - vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; +&cpu0 { + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + >; + + fsl,arm-soc-shared = <1>; +}; - vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; +®_arm { + vin-supply = <&sw1a_reg>; + regulator-allow-bypass; +}; - vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; +®_soc { + vin-supply = <&sw1a_reg>; + regulator-allow-bypass; }; &qspi2 { @@ -112,6 +51,9 @@ pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; +#ifndef SPANSIONFLASH + ddrsmp=<0>; + flash0: n25q256a@0 { #address-cells = <1>; #size-cells = <1>; @@ -127,4 +69,13 @@ spi-max-frequency = <29000000>; reg = <1>; }; +#endif +}; + +&usbphy1 { + tx-d-cal = <0x5>; +}; + +&usbphy2 { + tx-d-cal = <0x5>; }; |