diff options
53 files changed, 4084 insertions, 1699 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt new file mode 100644 index 000000000000..e3f22d23fc8f --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt @@ -0,0 +1,53 @@ +* Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C) + +Required properties: +- compatible : for SPI slave, use "adi,ad7879" + for I2C slave, use "adi,ad7879-1" +- reg : SPI chipselect/I2C slave address + See spi-bus.txt for more SPI slave properties +- interrupt-parent : the phandle for the interrupt controller +- interrupts : touch controller interrupt +- touchscreen-max-pressure : maximum reported pressure +- adi,resistance-plate-x : total resistance of X-plate (for pressure + calculation) +Optional properties: +- touchscreen-swapped-x-y : X and Y axis are swapped (boolean) +- adi,first-conversion-delay : 0-12: In 128us steps (starting with 128us) + 13 : 2.560ms + 14 : 3.584ms + 15 : 4.096ms + This property has to be a '/bits/ 8' value +- adi,acquisition-time : 0: 2us + 1: 4us + 2: 8us + 3: 16us + This property has to be a '/bits/ 8' value +- adi,median-filter-size : 0: disabled + 1: 4 measurements + 2: 8 measurements + 3: 16 measurements + This property has to be a '/bits/ 8' value +- adi,averaging : 0: 2 middle values (1 if median disabled) + 1: 4 middle values + 2: 8 middle values + 3: 16 values + This property has to be a '/bits/ 8' value +- adi,conversion-interval: : 0 : convert one time only + 1-255: 515us + val * 35us (up to 9.440ms) + This property has to be a '/bits/ 8' value + +Example: + + ad7879@2c { + compatible = "adi,ad7879-1"; + reg = <0x2c>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; diff --git a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt index 2f89db88fd57..b619733df292 100644 --- a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt @@ -6,7 +6,7 @@ Required properties: - model : The user-visible name of this sound complex - - ssi-controller : The phandle of the i.MX SSI controller + - cpu-dai : The phandle of CPU dai (e.g. i.MX SSI controller) - audio-codec : The phandle of the SGTL5000 audio codec @@ -32,6 +32,8 @@ Required properties: * Line Out Jack * Ext Spk +Optional properties: + - mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) - mux-ext-port : The external port of the i.MX audio muxer @@ -45,7 +47,7 @@ sound { compatible = "fsl,imx51-babbage-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx51-babbage-sgtl5000"; - ssi-controller = <&ssi1>; + cpu-dai = <&ssi1>; audio-codec = <&sgtl5000>; audio-routing = "MIC_IN", "Mic Jack", diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 892b56e815ce..3f7e3fa96cba 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -387,6 +387,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-12x12-lpddr3-arm2-mqs.dtb \ imx7d-12x12-lpddr3-arm2-pcie.dtb \ imx7d-19x19-lpddr2-arm2.dtb \ + imx7d-colibri-eval-v3.dtb \ + imx7s-colibri-eval-v3.dtb \ imx7d-sdb.dtb \ imx7d-sdb-epdc.dtb \ imx7d-sdb-gpmi-weim.dtb \ diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi new file mode 100644 index 000000000000..2bf546e6248e --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -0,0 +1,281 @@ +/* + * Copyright 2016 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/ { + chosen { + bootargs = "console=ttymxc0,115200"; + }; + + clocks { + /* fixed crystal dedicated to mpc258x */ + clk16m: clk@1 { + compatible = "fixed-clock"; + reg=<1>; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "clk16m"; + }; + }; +}; + +&bl { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +&adc2 { + status = "okay"; +}; + +&epxp { + status = "okay"; +}; + +&ecspi3 { + status = "okay"; + + mcp258x0: mcp258x@1 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio3>; + interrupts = <27 0x2>; + spi-max-frequency = <10000000>; + status = "okay"; + }; + + spidev0: spidev@1 { + compatible = "toradex,evalspi"; + reg = <0>; + spi-max-frequency = <23000000>; + status = "disabled"; + }; +}; + +&fec1 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + touch: touchrevf0710a@10 { + compatible = "touchrevolution,fusion-f0710a"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiotouch>; + reg = <0x10>; + /* SODIMM 28, Pen down interrupt */ + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH + /* SODIMM 30, Reset interrupt */ + &gpio1 10 GPIO_ACTIVE_LOW + >; + status = "disabled"; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc: m41t0m6@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; +}; + +&lcdif { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { +/* not working, it takes the last element currently + native-mode = <&timing_vga>; +*/ + /* Standard VGA timing */ + timing_vga: 640x480 { + clock-frequency = <25175000>; + hactive = <640>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <24>; + vback-porch = <32>; + vfront-porch = <11>; + hsync-len = <96>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; +#if 0 + /* WVGA Timing, e.g. EDT ET070080DH6 */ + timing_wvga: 800x480 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <216>; + hfront-porch = <40>; + vback-porch = <35>; + vfront-porch = <10>; + hsync-len = <128>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + /* WVGA Timing, TouchRevolution Fusion 7" */ + timing_wvga2: 800x480pixclkact { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <216>; + hfront-porch = <40>; + vback-porch = <35>; + vfront-porch = <10>; + hsync-len = <128>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <1>; + }; + /* Standard SVGA timing */ + timing_svga: 800x600 { + clock-frequency = <40000000>; + hactive = <800>; + vactive = <600>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <23>; + vfront-porch = <1>; + hsync-len = <128>; + vsync-len = <4>; + + de-active = <1>; + hsync-active = <1>; + vsync-active = <1>; + pixelclk-active = <0>; + }; + /* TouchRevolution Fusion 10"/CLAA101NC05 10.1 inch */ + timing_wsvga: 1024x600 { + clock-frequency = <48000000>; + hactive = <1024>; + vactive = <600>; + hback-porch = <104>; + hfront-porch = <43>; + vback-porch = <24>; + vfront-porch = <20>; + hsync-len = <5>; + vsync-len = <5>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + /* Standard XGA timing */ + timing_xga: 1024x768 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <160>; + hfront-porch = <24>; + vback-porch = <29>; + vfront-porch = <3>; + hsync-len = <136>; + vsync-len = <6>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; +#endif + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +/* The define SD_1_8 allows to use the SD interface at a higher speed mode + * if the card supports it. For this the signaling voltage is switched from + * 3.3V to 1.8V under the usdhc1's drivers control. + * All pins supplied with NVCC_SD1 must be able to cope with this + * and must (MUST!!!) not be driven with a voltage higher than 1.8V or + * the interface will not work. + */ +/* #define SD_1_8 */ +&usdhc1 { +#ifdef SD_1_8 + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_LDO2>; +#else + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + no-1-8-v; +#endif + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + enable-sdio-wakeup; + keep-power-in-suspend; + status = "okay"; +}; + +&iomuxc { + imx7d-eval-v3 { + pinctrl_gpiotouch: touchgpios { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x74 + MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x14 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi new file mode 100644 index 000000000000..63bb513549db --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -0,0 +1,719 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * Copyright (C) 2016 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* define USE_ENET_OUT when the PHY clock is provided by the i.MX7 */ +/* #define USE_ENET_OUT */ + +/ { + bl: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + }; + + pxp_v4l2_out { + compatible = "fsl,imx7d-pxp-v4l2", "fsl,imx6sx-pxp-v4l2", \ + "fsl,imx6sl-pxp-v4l2"; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + +#if 0 + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +#endif + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + enable-active-low; + }; + + reg_vref_1v8: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + sound { + compatible = "fsl,imx7d-colibri-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx7-colibri-sgtl5000"; + cpu-dai = <&sai1>; + audio-codec = <&codec>; + codec-master; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>, + <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <12288000>; + }; + + m4_tcm: tcml@007f8000 { + compatible = "fsl, m4_tcml"; + reg = <0x007f8000 0x8000>; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; +}; + +&adc2 { + vref-supply = <®_vref_1v8>; +}; + +&cpu0 { + arm-supply = <®_DCDC2>; +}; + +/* Colibri SPI */ +&ecspi3 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + //pinctrl-assert-gpios = <&gpio_spi 5 GPIO_ACTIVE_HIGH>; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>, + <&clks IMX7D_ENET1_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", +#ifdef USE_ENET_OUT + "enet_clk_ref", "enet_out"; +#else + "enet_clk_ref", "no_enet_out"; +#endif + + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rmii"; + phy-handle = <ðphy>; + phy-supply = <®_LDO1>; + fsl,magic-packet; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <0>; + }; + }; +}; + +#if 0 +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; +#endif + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_1>; + status = "okay"; + nand-on-flash-bbt; + + nand-ecc-mode = "hw"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clock-names = "mclk"; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; + + ad7879@2c { + compatible = "adi,ad7879-1"; + reg = <0x2c>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; + + pmic@33 { + compatible = "ricoh,rn5t567"; + reg = <0x33>; + + regulators { + reg_DCDC1: DCDC1 { /* V1.0_SOC */ + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1125000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_DCDC2: DCDC2 { /* V1.1_ARM */ + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1125000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_DCDC3: DCDC3 { /* V1.8 */ + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <1825000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_DCDC4: DCDC4 { /* V1.35_DRAM */ + regulator-min-microvolt = <1325000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_LDO2: LDO2 { /* +V1.8_SD */ + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <3325000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */ + regulator-min-microvolt = <3275000>; + regulator-max-microvolt = <3325000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_LDO4: LDO4 { /* V1.8_LPSR */ + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <1825000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */ + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <1825000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + //pinctrl-assert-gpios = <&gpio_spi 7 GPIO_ACTIVE_HIGH>; +}; + +&ocram { + reg = <0x00901000 0xf000>; +}; + +&rpmsg{ + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_1 &pinctrl_hog_2 &pinctrl_hog_3 &pinctrl_hog_4 &pinctrl_hog_5>; + + imx7d-sdb { + pinctrl_hog_1: hoggrp-1 { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */ + MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 USBH OC */ + MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */ + MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */ + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0X14 /* SODIMM 77 */ + MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */ + MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x14 /* SODIMM 91 */ + MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */ + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */ + MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */ + MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x14 /* SODIMM 105 */ + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x14 /* SODIMM 107 */ + MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */ + MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */ + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */ + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 /* SODIMM 117 */ + MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 /* SODIMM 119 */ + MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 /* SODIMM 121 */ + MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14 /* SODIMM 123 */ + MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 /* SODIMM 125 */ + MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */ + MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */ + MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */ + MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */ + MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */ + MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* SODIMM 106 */ + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */ + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */ + MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */ + MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x14 /* SODIMM 116 */ + MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x14 /* SODIMM 118 */ + MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x14 /* SODIMM 120 */ + MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x14 /* SODIMM 122 */ + MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x14 /* SODIMM 124 */ + MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x14 /* SODIMM 126 */ + MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* SODIMM 128 */ + MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x14 /* SODIMM 130 */ + MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x14 /* SODIMM 132 */ + MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x14 /* SODIMM 134 */ + MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 /* SODIMM 150 */ + MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x14 /* SODIMM 152 */ + MX7D_PAD_SD2_CLK__GPIO5_IO12 0x14 /* SODIMM 184 */ + MX7D_PAD_SD2_CMD__GPIO5_IO13 0x14 /* SODIMM 186 */ + >; + }; + + pinctrl_hog_2: hoggrp-2 { /* Camera */ + fsl,pins = < + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */ + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x14 /* SODIMM 69 */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */ + MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */ + MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */ + MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */ + MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x14 /* SODIMM 85 */ + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x14 /* SODIMM 97 */ + MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x14 /* SODIMM 101 */ + MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x14 /* SODIMM 103 */ + MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x14 /* SODIMM 94 */ + MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x14 /* SODIMM 96 */ + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* SODIMM 98 */ + >; + }; + + pinctrl_hog_3: hoggrp-3 { /* LCD 18-23 */ + fsl,pins = < + MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x14 /* SODIMM 136 */ + MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */ + MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */ + MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */ + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x14 /* SODIMM 146 */ + MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x14 /* SODIMM 148 */ + >; + }; + + pinctrl_hog_4: hoggrp-4 { /* CAN2 */ + fsl,pins = < + MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x14 /* SODIMM 178 */ + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x14 /* SODIMM 188 */ + >; + }; + + pinctrl_hog_5: hoggrp-5 { /* PMIC / TOUCH */ + fsl,pins = < + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x73 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x73 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73 + + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x73 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x73 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x73 +#ifdef USE_ENET_OUT +#if 1 + MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x40000073 +#else +/* workaround ethernet & M4 NMI issue */ + MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x73 + MX7D_PAD_I2C1_SDA__CCM_ENET_REF_CLK1 0x40000070 +#endif +#else + MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x73 +#endif + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + >; + }; + + pinctrl_ecspi3_cs: ecspi3_cs_grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2 + MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2 + MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59 + >; + }; + + pinctrl_gpmi_nand_1: gpmi-nand-1 { + fsl,pins = < + MX7D_PAD_SD3_CLK__NAND_CLE 0x71 + MX7D_PAD_SD3_CMD__NAND_ALE 0x71 + MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x71 + MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B 0x71 + MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x74 + MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71 + MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71 + MX7D_PAD_SD3_DATA0__NAND_DATA00 0x71 + MX7D_PAD_SD3_DATA1__NAND_DATA01 0x71 + MX7D_PAD_SD3_DATA2__NAND_DATA02 0x71 + MX7D_PAD_SD3_DATA3__NAND_DATA03 0x71 + MX7D_PAD_SD3_DATA4__NAND_DATA04 0x71 + MX7D_PAD_SD3_DATA5__NAND_DATA05 0x71 + MX7D_PAD_SD3_DATA6__NAND_DATA06 0x71 + MX7D_PAD_SD3_DATA7__NAND_DATA07 0x71 + + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x4000007f + MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x4000007f + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + >; + }; + + pinctrl_lcdif_dat_24: lcdifdatgrp-24 { + fsl,pins = < + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x79 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x79 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x79 + MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x79 + MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x79 + >; + }; + + pinctrl_uart1_ctrl1: uart1-ctrlgrp1 { /* Additional DTR, DCD */ + fsl,pins = < + MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x14 /* DCD */ + MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x14 /* DTR */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79 + MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79 + MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79 + MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79 + >; + }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79 + MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; + }; +}; + +&iomuxc_lpsr { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>; + + imx7d-sdb { + pinctrl_gpio1: gpio1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x59 + MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x59 + MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x59 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x4000007f + MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_cd_usdhc1: usdhc1-cd-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */ + >; + }; + + pinctrl_uart1_ctrl2: uart1-ctrlgrp2 { /* Additional DSR, RI */ + fsl,pins = < + MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */ + MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */ + >; + }; + }; +}; + +&iomuxc_lpsr_gpr { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2cint>; + + imx7d-colibri { + pinctrl_i2cint: i2cintgrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO13_GPR__GPIO1_I13 0xf000 + >; + }; + }; +}; + +&clks { + assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <884736000>; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <36864000>; + status = "okay"; +}; + +&sdma { + status = "okay"; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + fsl,uart-has-rtscts; + fsl,dte-mode; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + fsl,uart-has-rtscts; + fsl,dte-mode; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + fsl,dte-mode; +}; + +&usbotg1 { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts new file mode 100644 index 000000000000..c66964d68902 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts @@ -0,0 +1,23 @@ +/* + * Copyright 2016 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "imx7d-colibri.dtsi" +#include "imx7-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3"; + compatible = "toradex,colibri_imx7d-eval", "toradex,colibri_imx7d", \ + "fsl,imx7d"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi new file mode 100644 index 000000000000..3a8a5c715659 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * Copyright (C) 2016 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "imx7d.dtsi" +#include "imx7-colibri.dtsi" + +/ { + + memory { + reg = <0x80000000 0x20000000>; + }; +}; + +&usbotg2 { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/imx7d-pinfunc-lpsr.h b/arch/arm/boot/dts/imx7d-pinfunc-lpsr.h index 378694ee05c2..aee2da9add91 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc-lpsr.h +++ b/arch/arm/boot/dts/imx7d-pinfunc-lpsr.h @@ -73,4 +73,16 @@ #define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 #define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 +/* + * Pad configuration for LPSR GPR (GPIO8-15) + */ +#define MX7D_PAD_GPIO1_IO08_GPR__GPIO1_IO8 0x0000 0x0050 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO09_GPR__GPIO1_IO9 0x0000 0x0050 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO10_GPR__GPIO1_I10 0x0000 0x0050 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO11_GPR__GPIO1_I11 0x0000 0x0050 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO12_GPR__GPIO1_I12 0x0000 0x0054 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO13_GPR__GPIO1_I13 0x0000 0x0054 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO14_GPR__GPIO1_I14 0x0000 0x0054 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO15_GPR__GPIO1_I15 0x0000 0x0054 0x0000 0x0 0x0 + #endif /* __DTS_IMX7D_PINFUNC_LPSR_H */ diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 5053a7dbc629..ad60f20a8ea9 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -1,67 +1,16 @@ /* * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2016 Toradex AG * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <dt-bindings/clock/imx7d-clock.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include "imx7d-pinfunc.h" -#include "imx7d-pinfunc-lpsr.h" -#include "skeleton.dtsi" +#include "imx7s.dtsi" / { - aliases { - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; - gpio5 = &gpio6; - gpio6 = &gpio7; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - i2c3 = &i2c4; - mmc0 = &usdhc1; - mmc1 = &usdhc2; - mmc2 = &usdhc3; - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; - serial5 = &uart6; - serial6 = &uart7; - spi0 = &ecspi1; - spi1 = &ecspi2; - spi2 = &ecspi3; - spi3 = &ecspi4; - }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <0>; - operating-points = < - /* KHz uV */ - 996000 1075000 - 792000 975000 - >; - clock-latency = <61036>; /* two CLK32 periods */ - clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>, - <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>; - clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main"; - }; - cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; @@ -69,222 +18,6 @@ }; }; - intc: interrupt-controller@31001000 { - compatible = "arm,cortex-a7-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x31001000 0x1000>, - <0x31002000 0x100>; - interrupt-parent = <&intc>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - ckil: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "ckil"; - }; - - osc: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "osc"; - }; - - }; - - timer { - compatible = "arm,armv7-timer"; - arm,cpu-registers-not-fw-configured; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - interrupt-parent = <&intc>; - clock-frequency = <8000000>; - }; - - etr@0,30086000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x30086000 0x1000>; - - coresight-default-sink; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - port{ - etr_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; - }; - }; - }; - - tpiu@0,30087000 { - compatible = "arm,coresight-tpiu", "arm,primecell"; - reg = <0x30087000 0x1000>; - - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - port { - tpiu_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator_out_port1>; - }; - }; - }; - - replicator { - /* non-configurable replicators don't show up on the - * AMBA bus. As such no need to add "arm,primecell". - */ - compatible = "arm,coresight-replicator"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* replicator output ports */ - port@0 { - reg = <0>; - replicator_out_port0: endpoint { - remote-endpoint = <&tpiu_in_port>; - }; - }; - - port@1 { - reg = <1>; - replicator_out_port1: endpoint { - remote-endpoint = <&etr_in_port>; - }; - }; - - /* replicator input port */ - port@2 { - reg = <0>; - replicator_in_port0: endpoint { - slave-mode; - remote-endpoint = <&etf_out_port>; - }; - }; - }; - }; - - etf@0,30084000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x30084000 0x1000>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - ports{ - #address-cells = <1>; - #size-cells = <0>; - - port@0{ - reg = <0>; - etf_in_port: endpoint { - slave-mode; - remote-endpoint = <&hugo_funnel_out_port0>; - }; - }; - port@1{ - reg = <0>; - etf_out_port: endpoint { - remote-endpoint = <&replicator_in_port0>; - }; - }; - }; - }; - - funnel@1,30083000 { - compatible = "arm,coresight-funnel", "arm,primecell"; - reg = <0x30083000 0x1000>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - /* funnel input ports */ - port@0 { - reg = <0>; - hugo_funnel_in_port0: endpoint { - slave-mode; - remote-endpoint = <&ca_funnel_out_port0>; - }; - }; - port@1 { - reg = <1>; - hugo_funnel_in_port1: endpoint { - slave-mode; /* M4 input */ - }; - }; - port@2 { - reg = <0>; - hugo_funnel_out_port0: endpoint { - remote-endpoint = <&etf_in_port>; - }; - }; - }; - }; - - funnel@0,30041000 { - compatible = "arm,coresight-funnel", "arm,primecell"; - reg = <0x30041000 0x1000>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel input ports */ - port@0 { - reg = <0>; - ca_funnel_in_port0: endpoint { - slave-mode; - remote-endpoint = <&etm0_out_port>; - }; - }; - - port@1 { - reg = <1>; - ca_funnel_in_port1: endpoint { - slave-mode; - remote-endpoint = <&etm1_out_port>; - }; - }; - - /* funnel output port */ - port@2 { - reg = <0>; - ca_funnel_out_port0: endpoint { - remote-endpoint = - <&hugo_funnel_in_port0>; - }; - }; - }; - }; - - etm@0,3007c000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0x3007c000 0x1000>; - - cpu = <&cpu0>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - port { - etm0_out_port: endpoint { - remote-endpoint = <&ca_funnel_in_port0>; - }; - }; - }; etm@1,3007d000 { compatible = "arm,coresight-etm3x", "arm,primecell"; @@ -299,1142 +32,61 @@ remote-endpoint = <&ca_funnel_in_port1>; }; }; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; + }; +}; - /* global autoconfigured region for contiguous allocations */ - linux,cma { - compatible = "shared-dma-pool"; - reusable; - size = <0x14000000>; - linux,cma-default; - }; +&aips3 { + + usbotg2: usb@30b20000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b20000 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphy_nop2>; + fsl,usbmisc = <&usbmisc2 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; }; - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gpc>; - ranges; - - busfreq { - compatible = "fsl,imx_busfreq"; - fsl,max_ddr_freq = <533000000>; - clocks = <&clks IMX7D_OSC_24M_CLK>, <&clks IMX7D_MAIN_AXI_ROOT_SRC>, - <&clks IMX7D_AHB_CHANNEL_ROOT_SRC>, <&clks IMX7D_PLL_SYS_PFD0_392M_CLK>, - <&clks IMX7D_DRAM_ROOT_SRC>, <&clks IMX7D_DRAM_ALT_ROOT_SRC>, - <&clks IMX7D_PLL_DRAM_MAIN_CLK>, <&clks IMX7D_DRAM_ALT_ROOT_CLK>, - <&clks IMX7D_PLL_SYS_PFD2_270M_CLK>, <&clks IMX7D_PLL_SYS_PFD1_332M_CLK>, - <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>, <&clks IMX7D_MAIN_AXI_ROOT_DIV>; - clock-names = "osc", "axi_sel", "ahb_sel", "pfd0_392m", "dram_root", "dram_alt_sel", - "pll_dram", "dram_alt_root", "pfd2_270m", "pfd1_332m", "ahb", "axi"; - interrupts = <0 112 0x04>, <0 113 0x04>; - interrupt-names = "irq_busfreq_0", "irq_busfreq_1"; - }; - - caam_sm: caam-sm@00100000 { - compatible = "fsl,imx7d-caam-sm", "fsl,imx6q-caam-sm"; - reg = <0x00100000 0x3fff>; - }; - - irq_sec_vio: caam_secvio { - compatible = "fsl,imx7d-caam-secvio", "fsl,imx6q-caam-secvio"; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - }; - - pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - ocrams_ddr: sram@00900000 { - compatible = "fsl,ddr-lpm-sram"; - reg = <0x00900000 0x1000>; - clocks = <&clks IMX7D_OCRAM_CLK>; - }; - - ocram: sram@901000 { - compatible = "mmio-sram"; - reg = <0x00901000 0x1f000>; - clocks = <&clks IMX7D_OCRAM_CLK>; - }; - - ocrams: sram@00180000 { - compatible = "fsl,lpm-sram"; - reg = <0x00180000 0x8000>; - clocks = <&clks IMX7D_OCRAM_S_CLK>; - status = "disabled"; - }; - - ocrams_mf: sram-mf@00900000 { - compatible = "fsl,mega-fast-sram"; - reg = <0x00900000 0x20000>; - clocks = <&clks IMX7D_OCRAM_CLK>; - }; - - dma_apbh: dma-apbh@33000000 { - compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; - reg = <0x33000000 0x2000>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; - #dma-cells = <1>; - dma-channels = <4>; - clocks = <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, - <&clks IMX7D_NAND_ROOT_CLK>; - clock-names = "dma_apbh_bch", "dma_apbh_io"; - }; - - gpmi: gpmi-nand@33002000{ - compatible = "fsl,imx7d-gpmi-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x33002000 0x2000>, <0x33004000 0x4000>; - reg-names = "gpmi-nand", "bch"; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "bch"; - clocks = <&clks IMX7D_NAND_ROOT_CLK>, - <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>; - clock-names = "gpmi_io", "gpmi_bch_apb"; - dmas = <&dma_apbh 0>; - dma-names = "rx-tx"; - status = "disabled"; - }; - - aips1: aips-bus@30000000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30000000 0x400000>; - ranges; - - gpio1: gpio@30200000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30200000 0x10000>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */ - <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@30210000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30210000 0x10000>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@30220000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30220000 0x10000>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@30230000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30230000 0x10000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@30240000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30240000 0x10000>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@30250000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30250000 0x10000>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio7: gpio@30260000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30260000 0x10000>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - iomuxc_lpsr_gpr: lpsr-gpr@30270000 { - compatible = "fsl,imx7d-lpsr-gpr"; - reg = <0x30270000 0x10000>; - }; - - wdog1: wdog@30280000 { - compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; - reg = <0x30280000 0x10000>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; - }; - - wdog2: wdog@30290000 { - compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; - reg = <0x30290000 0x10000>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_WDOG2_ROOT_CLK>; - status = "disabled"; - }; - - wdog3: wdog@302a0000 { - compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; - reg = <0x302a0000 0x10000>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_WDOG3_ROOT_CLK>; - status = "disabled"; - }; - - wdog4: wdog@302b0000 { - compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; - reg = <0x302b0000 0x10000>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_WDOG4_ROOT_CLK>; - status = "disabled"; - }; - - iomuxc_lpsr: iomuxc-lpsr@302c0000 { - compatible = "fsl,imx7d-iomuxc-lpsr"; - reg = <0x302c0000 0x10000>; - fsl,input-sel = <&iomuxc>; - }; - - gpt1: gpt@302d0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx31-gpt"; - reg = <0x302d0000 0x10000>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_GPT1_ROOT_CLK>, - <&clks IMX7D_GPT1_ROOT_CLK>, - <&clks IMX7D_GPT_3M_CLK>; - clock-names = "ipg", "per", "osc_per"; - }; - - gpt2: gpt@302e0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx31-gpt"; - reg = <0x302e0000 0x10000>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_GPT2_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - gpt3: gpt@302f0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx31-gpt"; - reg = <0x302f0000 0x10000>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_GPT3_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - gpt4: gpt@30300000 { - compatible = "fsl,imx7d-gpt", "fsl,imx31-gpt"; - reg = <0x30300000 0x10000>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_GPT4_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - kpp: kpp@30320000 { - compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp"; - reg = <0x30320000 0x10000>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>; - status = "disabled"; - }; - - iomuxc: iomuxc@30330000 { - compatible = "fsl,imx7d-iomuxc"; - reg = <0x30330000 0x10000>; - }; - - gpr: iomuxc-gpr@30340000 { - compatible = "fsl,imx7d-iomuxc-gpr", "syscon"; - reg = <0x30340000 0x10000>; - }; - - mqs: mqs { - compatible = "fsl,imx6sx-mqs"; - gpr = <&gpr>; - status = "disabled"; - }; - - ocotp: ocotp-ctrl@30350000 { - compatible = "fsl,imx7d-ocotp", "syscon"; - reg = <0x30350000 0x10000>; - clocks = <&clks IMX7D_OCOTP_CLK>; - }; - - anatop: anatop@30360000 { - compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; - reg = <0x30360000 0x10000>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - - reg_1p0d: regulator-vdd1p0d@210 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vdd1p0d"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1200000>; - anatop-reg-offset = <0x210>; - anatop-vol-bit-shift = <8>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <8>; - anatop-min-voltage = <800000>; - anatop-max-voltage = <1200000>; - anatop-enable-bit = <31>; - }; - - reg_1p2: regulator-vdd1p2@220 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vdd1p2"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - anatop-reg-offset = <0x220>; - anatop-vol-bit-shift = <8>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <8>; - anatop-min-voltage = <1100000>; - anatop-max-voltage = <1300000>; - anatop-enable-bit = <31>; - }; - }; - - tempmon: tempmon { - compatible = "fsl,imx7d-tempmon"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon =<&anatop>; - fsl,tempmon-data = <&ocotp>; - clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; - }; - - caam_snvs: caam-snvs@30370000 { - compatible = "fsl,imx6q-caam-snvs"; - reg = <0x30370000 0x10000>; - }; - - snvs: snvs@30370000 { - compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; - reg = <0x30370000 0x10000>; - - snvs_rtc: snvs-rtc-lp{ - compatible = "fsl,sec-v4.0-mon-rtc-lp"; - regmap =<&snvs>; - offset = <0x34>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - }; - - snvs_pwrkey: snvs-powerkey { - compatible = "fsl,sec-v4.0-pwrkey"; - regmap = <&snvs>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - linux,keycode = <KEY_POWER>; - wakeup; - }; - - snvs_poweroff: snvs-poweroff { - compatible = "syscon-poweroff"; - regmap = <&snvs>; - offset = <0x38>; - mask = <0x61>; - }; - }; - - clks: ccm@30380000 { - compatible = "fsl,imx7d-ccm"; - reg = <0x30380000 0x10000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - #clock-cells = <1>; - clocks = <&ckil>, <&osc>; - clock-names = "ckil", "osc"; - }; - - src: src@30390000 { - compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon"; - reg = <0x30390000 0x10000>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - #reset-cells = <1>; - }; - - gpc: gpc@303a0000 { - compatible = "fsl,imx7d-gpc"; - reg = <0x303a0000 0x10000>; - interrupt-controller; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <3>; - interrupt-parent = <&intc>; - fsl,mf-mix-wakeup-irq = <0x54010000 0xc00 0x0 0x1040640>; - mipi-phy-supply = <®_1p0d>; - pcie-phy-supply = <®_1p0d>; - vcc-supply = <®_1p2>; - }; - }; - - aips2: aips-bus@30400000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30400000 0x400000>; - ranges; - - adc1: adc@30610000 { - compatible = "fsl,imx7d-adc"; - reg = <0x30610000 0x10000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ADC_ROOT_CLK>; - num-channels = <4>; - clock-names = "adc"; - status = "disabled"; - }; - - adc2: adc@30620000 { - compatible = "fsl,imx7d-adc"; - reg = <0x30620000 0x10000>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ADC_ROOT_CLK>; - num-channels = <4>; - clock-names = "adc"; - status = "disabled"; - }; - - ecspi4: ecspi@30630000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-ecspi", "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; - reg = <0x30630000 0x10000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>, - <&clks IMX7D_ECSPI4_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - flextimer1: flextimer@30640000 { - compatible = "fsl,imx7d-flextimer"; - reg = <0x30640000 0x10000>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - flextimer2: flextimer@30650000 { - compatible = "fsl,imx7d-flextimer"; - reg = <0x30650000 0x10000>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - pwm1: pwm@30660000 { - compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; - reg = <0x30660000 0x10000>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PWM1_ROOT_CLK>, - <&clks IMX7D_PWM1_ROOT_CLK>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - status = "disabled"; - }; - - pwm2: pwm@30670000 { - compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; - reg = <0x30670000 0x10000>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PWM2_ROOT_CLK>, - <&clks IMX7D_PWM2_ROOT_CLK>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - status = "disabled"; - }; - - pwm3: pwm@30680000 { - compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; - reg = <0x30680000 0x10000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PWM3_ROOT_CLK>, - <&clks IMX7D_PWM3_ROOT_CLK>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - status = "disabled"; - }; - - pwm4: pwm@30690000 { - compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; - reg = <0x30690000 0x10000>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PWM4_ROOT_CLK>, - <&clks IMX7D_PWM4_ROOT_CLK>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - status = "disabled"; - }; - - system_counter_rd: system-counter-rd@306a0000 { - compatible = "fsl,imx7d-system-counter-rd"; - reg = <0x306a0000 0x10000>; - status = "disabled"; - }; - - system_counter_cmp: system-counter-cmp@306b0000 { - compatible = "fsl,imx7d-system-counter-cmp"; - reg = <0x306b0000 0x10000>; - status = "disabled"; - }; - - system_counter_ctrl: system-counter-ctrl@306c0000 { - compatible = "fsl,imx7d-system-counter-ctrl"; - reg = <0x306c0000 0x10000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - epdc: epdc@306f0000 { - compatible = "fsl,imx7d-epdc"; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x306f0000 0x10000>; - clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_EPDC_PIXEL_ROOT_CLK>; - clock-names = "epdc_axi", "epdc_pix"; - epdc-ram = <&gpr 0x4 30>; - status = "disabled"; - }; - - epxp: epxp@30700000 { - compatible = "fsl,imx7d-pxp-dma"; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x30700000 0x10000>; - clocks = <&clks IMX7D_PXP_IPG_CLK>, <&clks IMX7D_PXP_AXI_CLK>; - clock-names = "pxp_ipg", "pxp_axi"; - status = "disabled"; - }; - - csi1: csi@30710000 { - compatible = "fsl,imx7d-csi", "fsl,imx6s-csi"; - reg = <0x30710000 0x10000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CSI_MCLK_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "disp-axi", "csi_mclk", "disp_dcic"; - status = "disabled"; - }; - - lcdif: lcdif@30730000 { - compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; - reg = <0x30730000 0x10000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "pix", "axi", "disp_axi"; - status = "disabled"; - }; - - mipi_csi: mipi-csi@30750000 { - compatible = "fsl,imx7d-mipi-csi"; - reg = <0x30750000 0x10000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_MIPI_CSI_ROOT_CLK>, - <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; - clock-names = "mipi_clk", "phy_clk"; - mipi-phy-supply = <®_1p0d>; - csis-phy-reset = <&src 0x28 2>; - bus-width = <4>; - status = "disabled"; - }; - - mipi_dsi: mipi-dsi@30760000 { - compatible = "fsl,imx7d-mipi-dsi"; - reg = <0x30760000 0x10000>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>, - <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; - clock-names = "mipi_cfg_clk", "mipi_pllref_clk"; - mipi-phy-supply = <®_1p0d>; - status = "disabled"; - }; - - ddrc: ddrc@307a0000 { - compatible = "fsl,imx7-ddrc"; - reg = <0x307a0000 0x10000>; - }; - }; - - aips3: aips-bus@30800000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30800000 0x400000>; - ranges; - - spba-bus@30800000 { - compatible = "fsl,spba-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30800000 0x100000>; - ranges; - - ecspi1: ecspi@30820000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-ecspi", "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; - reg = <0x30820000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, - <&clks IMX7D_ECSPI1_ROOT_CLK>; - clock-names = "ipg", "per"; - dmas = <&sdma 0 7 1>, <&sdma 1 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - ecspi2: ecspi@30830000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-ecspi", "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; - reg = <0x30830000 0x10000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, - <&clks IMX7D_ECSPI2_ROOT_CLK>; - clock-names = "ipg", "per"; - dmas = <&sdma 2 7 1>, <&sdma 3 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - ecspi3: ecspi@30840000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-ecspi", "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; - reg = <0x30840000 0x10000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, - <&clks IMX7D_ECSPI3_ROOT_CLK>; - clock-names = "ipg", "per"; - dmas = <&sdma 4 7 1>, <&sdma 5 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart1: serial@30860000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART1_ROOT_CLK>, - <&clks IMX7D_UART1_ROOT_CLK>; - clock-names = "ipg", "per"; - dmas = <&sdma 22 4 0>, <&sdma 23 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart2: serial@30890000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART2_ROOT_CLK>, - <&clks IMX7D_UART2_ROOT_CLK>; - clock-names = "ipg", "per"; - dmas = <&sdma 24 4 0>, <&sdma 25 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart3: serial@30880000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART3_ROOT_CLK>, - <&clks IMX7D_UART3_ROOT_CLK>; - clock-names = "ipg", "per"; - dmas = <&sdma 26 4 0>, <&sdma 27 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - sai1: sai@308a0000 { - compatible = "fsl,imx7d-sai", - "fsl,imx6sx-sai"; - reg = <0x308a0000 0x10000>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_SAI1_IPG_CLK>, - <&clks IMX7D_SAI1_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "rx", "tx"; - dmas = <&sdma 8 24 0>, <&sdma 9 24 0>; - status = "disabled"; - }; - - sai2: sai@308b0000 { - compatible = "fsl,imx7d-sai", - "fsl,imx6sx-sai"; - reg = <0x308b0000 0x10000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_SAI2_IPG_CLK>, - <&clks IMX7D_SAI2_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "rx", "tx"; - dmas = <&sdma 10 24 0>, <&sdma 11 24 0>; - status = "disabled"; - }; - - sai3: sai@308c0000 { - compatible = "fsl,imx7d-sai", - "fsl,imx6sx-sai"; - reg = <0x308c0000 0x10000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_SAI3_IPG_CLK>, - <&clks IMX7D_SAI3_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "rx", "tx"; - dmas = <&sdma 12 24 0>, <&sdma 13 24 0>; - status = "disabled"; - }; - }; - - crypto: caam@30900000 { - compatible = "fsl,imx7d-caam", "fsl,sec-v4.0"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30900000 0x40000>; - ranges = <0 0x30900000 0x40000>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CAAM_CLK>, - <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; - clock-names = "caam_ipg", "caam_aclk"; - - sec_jr0: jr0@1000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x1000 0x1000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - }; - - sec_jr1: jr1@2000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x2000 0x1000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - }; - - sec_jr2: jr2@3000 { - compatible = "fsl,sec-v4.0-job-ring"; - reg = <0x3000 0x1000>; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - flexcan1: can@30a00000 { - compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; - reg = <0x30a00000 0x10000>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CAN1_ROOT_CLK>; - clock-names = "ipg", "per"; - stop-mode = <&gpr 0x10 1 0x10 17>; - status = "disabled"; - }; - - flexcan2: can@30a10000 { - compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; - reg = <0x30a10000 0x10000>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CAN2_ROOT_CLK>; - clock-names = "ipg", "per"; - stop-mode = <&gpr 0x10 2 0x10 18>; - status = "disabled"; - }; - - i2c1: i2c@30a20000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; - reg = <0x30a20000 0x10000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_I2C1_ROOT_CLK>; - status = "disabled"; - }; - - i2c2: i2c@30a30000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; - reg = <0x30a30000 0x10000>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_I2C2_ROOT_CLK>; - status = "disabled"; - }; - - i2c3: i2c@30a40000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; - reg = <0x30a40000 0x10000>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_I2C3_ROOT_CLK>; - status = "disabled"; - }; - - i2c4: i2c@30a50000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; - reg = <0x30a50000 0x10000>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_I2C4_ROOT_CLK>; - status = "disabled"; - }; - - uart4: serial@30a60000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x30a60000 0x10000>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART4_ROOT_CLK>, - <&clks IMX7D_UART4_ROOT_CLK>; - clock-names = "ipg", "per"; - dmas = <&sdma 28 4 0>, <&sdma 29 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart5: serial@30a70000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x30a70000 0x10000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART5_ROOT_CLK>, - <&clks IMX7D_UART5_ROOT_CLK>; - clock-names = "ipg", "per"; - dmas = <&sdma 30 4 0>, <&sdma 31 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart6: serial@30a80000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x30a80000 0x10000>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART6_ROOT_CLK>, - <&clks IMX7D_UART6_ROOT_CLK>; - clock-names = "ipg", "per"; - dmas = <&sdma 32 4 0>, <&sdma 33 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart7: serial@30a90000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x30a90000 0x10000>; - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART7_ROOT_CLK>, - <&clks IMX7D_UART7_ROOT_CLK>; - clock-names = "ipg", "per"; - dmas = <&sdma 34 4 0>, <&sdma 35 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - mu: mu@30aa0000 { - compatible = "fsl,imx7d-mu", "fsl,imx6sx-mu"; - reg = <0x30aa0000 0x10000>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_MU_ROOT_CLK>; - clock-names = "mu"; - status = "okay"; - }; - - rpmsg: rpmsg{ - compatible = "fsl,imx7d-rpmsg"; - status = "disabled"; - }; - - sema4: sema4@30ac0000 { - compatible = "fsl,imx7d-sema4"; - reg = <0x30ac0000 0x10000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_SEMA4_HS_ROOT_CLK>; - clock-names = "sema4"; - status = "okay"; - }; - - usbotg1: usb@30b10000 { - compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; - reg = <0x30b10000 0x200>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_USB_CTRL_CLK>; - fsl,usbphy = <&usbphy_nop1>; - fsl,usbmisc = <&usbmisc1 0>; - phy-clkgate-delay-us = <400>; - status = "disabled"; - }; - - usbotg2: usb@30b20000 { - compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; - reg = <0x30b20000 0x200>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_USB_CTRL_CLK>; - fsl,usbphy = <&usbphy_nop2>; - fsl,usbmisc = <&usbmisc2 0>; - phy-clkgate-delay-us = <400>; - status = "disabled"; - }; - - usbh: usb@30b30000 { - compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; - reg = <0x30b30000 0x200>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_USB_CTRL_CLK>; - fsl,usbphy = <&usbphy_nop3>; - fsl,usbmisc = <&usbmisc3 0>; - phy_type = "hsic"; - dr_mode = "host"; - phy-clkgate-delay-us = <400>; - status = "disabled"; - }; - - usbmisc1: usbmisc@30b10200 { - #index-cells = <1>; - compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; - reg = <0x30b10200 0x200>; - }; - - usbmisc2: usbmisc@30b20200 { - #index-cells = <1>; - compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; - reg = <0x30b20200 0x200>; - }; - - usbmisc3: usbmisc@30b30200 { - #index-cells = <1>; - compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; - reg = <0x30b30200 0x200>; - }; - - usbphy_nop1: usbphy_nop1 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_PHY1_CLK>; - clock-names = "main_clk"; - }; - - usbphy_nop2: usbphy_nop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_PHY2_CLK>; - clock-names = "main_clk"; - }; - - usbphy_nop3: usbphy_nop3 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; - clock-names = "main_clk"; - vcc-supply = <®_1p2>; - }; - - usdhc1: usdhc@30b40000 { - compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; - reg = <0x30b40000 0x10000>; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_IPG_ROOT_CLK>, - <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, - <&clks IMX7D_USDHC1_ROOT_CLK>; - clock-names = "ipg", "ahb", "per"; - fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; - bus-width = <4>; - status = "disabled"; - }; - - usdhc2: usdhc@30b50000 { - compatible = "fsl,imx7d-usdhc", "fsl,imx6sx-usdhc"; - reg = <0x30b50000 0x10000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_IPG_ROOT_CLK>, - <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, - <&clks IMX7D_USDHC2_ROOT_CLK>; - clock-names = "ipg", "ahb", "per"; - fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; - bus-width = <4>; - status = "disabled"; - }; - - usdhc3: usdhc@30b60000 { - compatible = "fsl,imx7d-usdhc", "fsl,imx6sx-usdhc"; - reg = <0x30b60000 0x10000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_IPG_ROOT_CLK>, - <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, - <&clks IMX7D_USDHC3_ROOT_CLK>; - clock-names = "ipg", "ahb", "per"; - fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; - bus-width = <4>; - status = "disabled"; - }; - - sim1: sim@30b90000 { - compatible = "fsl,imx7d-sim"; - reg = <0x30b90000 0x10000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_SIM1_ROOT_CLK>; - clock-names = "sim"; - status = "disabled"; - }; - - sim2: sim@30ba0000 { - compatible = "fsl,imx7d-sim"; - reg = <0x30ba0000 0x10000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - qspi1: qspi@30bb0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-qspi"; - reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>; - reg-names = "QuadSPI", "QuadSPI-memory"; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_QSPI_ROOT_CLK>, - <&clks IMX7D_QSPI_ROOT_CLK>; - clock-names = "qspi_en", "qspi"; - status = "disabled"; - }; - - weim: weim@30bc0000 { - compatible = "fsl,imx7d-weim", "fsl,imx6sx-weim", "fsl,imx6q-weim"; - reg = <0x30bc0000 0x10000>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_EIM_ROOT_CLK>; - status = "disabled"; - }; - - sdma: sdma@30bd0000 { - compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; - reg = <0x30bd0000 0x10000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_SDMA_CORE_CLK>, - <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; - clock-names = "ipg", "ahb"; - #dma-cells = <3>; - iram = <&ocram>; - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; - }; + usbmisc2: usbmisc@30b20200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b20200 0x200>; + }; - fec1: ethernet@30be0000 { - compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; - reg = <0x30be0000 0x10000>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, - <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - stop-mode = <&gpr 0x10 3>; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; - fsl,wakeup_irq = <2>; - status = "disabled"; - }; + usbphy_nop2: usbphy_nop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY2_CLK>; + clock-names = "main_clk"; + }; - fec2: ethernet@30bf0000 { - compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; - reg = <0x30bf0000 0x10000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET2_TIME_ROOT_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, - <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - stop-mode = <&gpr 0x10 4>; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; - fsl,wakeup_irq = <2>; - status = "disabled"; - }; - }; + fec2: ethernet@30bf0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30bf0000 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + stop-mode = <&gpr 0x10 4>; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + fsl,wakeup_irq = <2>; + status = "disabled"; + }; +}; - pcie: pcie@0x33800000 { - compatible = "fsl,imx7d-pcie", "snps,dw-pcie"; - reg = <0x33800000 0x4000>, <0x4ff00000 0x80000>; - reg-names = "dbi", "config"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O 64KB */ - 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ - num-lanes = <1>; - interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, - <&clks IMX7D_PCIE_PHY_ROOT_CLK>; - clock-names = "pcie", "pcie_bus", "pcie_phy"; - pcie-phy-supply = <®_1p0d>; - status = "disabled"; +&funnel_ports { + port@1 { + reg = <1>; + ca_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out_port>; }; }; }; diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts new file mode 100644 index 000000000000..a9721e991dff --- /dev/null +++ b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts @@ -0,0 +1,18 @@ +/* + * Copyright 2016 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "imx7s-colibri.dtsi" +#include "imx7-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3"; + compatible = "toradex,colibri_imx7s-eval", "toradex,colibri_imx7s", \ + "fsl,imx7s", "fsl,imx7d"; +}; diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi new file mode 100644 index 000000000000..349f637337a3 --- /dev/null +++ b/arch/arm/boot/dts/imx7s-colibri.dtsi @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2016 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "imx7s.dtsi" +#include "imx7-colibri.dtsi" + +/ { + model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3"; + compatible = "toradex,colibri_imx7s-eval", "toradex,colibri_imx7s", "fsl,imx7s", "fsl,imx7d"; + + memory { + reg = <0x80000000 0x10000000>; + }; +}; + diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi new file mode 100644 index 000000000000..77155bbfebb7 --- /dev/null +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -0,0 +1,1367 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/clock/imx7d-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx7d-pinfunc.h" +#include "imx7d-pinfunc-lpsr.h" +#include "skeleton.dtsi" + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + operating-points = < + /* KHz uV */ + 996000 1075000 + 792000 975000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>, + <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>; + clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main"; + }; + }; + + intc: interrupt-controller@31001000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x31001000 0x1000>, + <0x31002000 0x100>; + interrupt-parent = <&intc>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + }; + + timer { + compatible = "arm,armv7-timer"; + arm,cpu-registers-not-fw-configured; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&intc>; + clock-frequency = <8000000>; + }; + + etr@0,30086000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30086000 0x1000>; + + coresight-default-sink; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port{ + etr_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + tpiu@0,30087000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x30087000 0x1000>; + + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + port { + tpiu_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + replicator { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etf_out_port>; + }; + }; + }; + }; + + etf@0,30084000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30084000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports{ + #address-cells = <1>; + #size-cells = <0>; + + port@0{ + reg = <0>; + etf_in_port: endpoint { + slave-mode; + remote-endpoint = <&hugo_funnel_out_port0>; + }; + }; + port@1{ + reg = <0>; + etf_out_port: endpoint { + remote-endpoint = <&replicator_in_port0>; + }; + }; + }; + }; + + funnel@1,30083000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x30083000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + /* funnel input ports */ + port@0 { + reg = <0>; + hugo_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ca_funnel_out_port0>; + }; + }; + port@1 { + reg = <1>; + hugo_funnel_in_port1: endpoint { + slave-mode; /* M4 input */ + }; + }; + port@2 { + reg = <0>; + hugo_funnel_out_port0: endpoint { + remote-endpoint = <&etf_in_port>; + }; + }; + }; + }; + + funnel@0,30041000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x30041000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + funnel_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port@0 { + reg = <0>; + ca_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out_port>; + }; + }; + + /* funnel output port */ + port@2 { + reg = <0>; + ca_funnel_out_port0: endpoint { + remote-endpoint = + <&hugo_funnel_in_port0>; + }; + }; + }; + }; + + etm@0,3007c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x3007c000 0x1000>; + + cpu = <&cpu0>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; + }; + }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x14000000>; + linux,cma-default; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + busfreq { + compatible = "fsl,imx_busfreq"; + fsl,max_ddr_freq = <533000000>; + clocks = <&clks IMX7D_OSC_24M_CLK>, <&clks IMX7D_MAIN_AXI_ROOT_SRC>, + <&clks IMX7D_AHB_CHANNEL_ROOT_SRC>, <&clks IMX7D_PLL_SYS_PFD0_392M_CLK>, + <&clks IMX7D_DRAM_ROOT_SRC>, <&clks IMX7D_DRAM_ALT_ROOT_SRC>, + <&clks IMX7D_PLL_DRAM_MAIN_CLK>, <&clks IMX7D_DRAM_ALT_ROOT_CLK>, + <&clks IMX7D_PLL_SYS_PFD2_270M_CLK>, <&clks IMX7D_PLL_SYS_PFD1_332M_CLK>, + <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>, <&clks IMX7D_MAIN_AXI_ROOT_DIV>; + clock-names = "osc", "axi_sel", "ahb_sel", "pfd0_392m", "dram_root", "dram_alt_sel", + "pll_dram", "dram_alt_root", "pfd2_270m", "pfd1_332m", "ahb", "axi"; + interrupts = <0 112 0x04>, <0 113 0x04>; + interrupt-names = "irq_busfreq_0", "irq_busfreq_1"; + }; + + caam_sm: caam-sm@00100000 { + compatible = "fsl,imx7d-caam-sm", "fsl,imx6q-caam-sm"; + reg = <0x00100000 0x3fff>; + }; + + irq_sec_vio: caam_secvio { + compatible = "fsl,imx7d-caam-secvio", "fsl,imx6q-caam-secvio"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + ocrams_ddr: sram@00900000 { + compatible = "fsl,ddr-lpm-sram"; + reg = <0x00900000 0x1000>; + clocks = <&clks IMX7D_OCRAM_CLK>; + }; + + ocram: sram@901000 { + compatible = "mmio-sram"; + reg = <0x00901000 0x1f000>; + clocks = <&clks IMX7D_OCRAM_CLK>; + }; + + ocrams: sram@00180000 { + compatible = "fsl,lpm-sram"; + reg = <0x00180000 0x8000>; + clocks = <&clks IMX7D_OCRAM_S_CLK>; + status = "disabled"; + }; + + ocrams_mf: sram-mf@00900000 { + compatible = "fsl,mega-fast-sram"; + reg = <0x00900000 0x20000>; + clocks = <&clks IMX7D_OCRAM_CLK>; + }; + + dma_apbh: dma-apbh@33000000 { + compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x33000000 0x2000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, + <&clks IMX7D_NAND_ROOT_CLK>; + clock-names = "dma_apbh_bch", "dma_apbh_io"; + }; + + gpmi: gpmi-nand@33002000{ + compatible = "fsl,imx7d-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x33002000 0x2000>, <0x33004000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&clks IMX7D_NAND_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>; + clock-names = "gpmi_io", "gpmi_bch_apb"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + aips1: aips-bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x400000>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */ + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@30250000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30250000 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@30260000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30260000 0x10000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + iomuxc_lpsr_gpr: lpsr-gpr@30270000 { + compatible = "fsl,imx7d-lpsr-gpr"; + reg = <0x30270000 0x10000>; + }; + + wdog1: wdog@30280000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; + }; + + wdog2: wdog@30290000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG2_ROOT_CLK>; + status = "disabled"; + }; + + wdog3: wdog@302a0000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG3_ROOT_CLK>; + status = "disabled"; + }; + + wdog4: wdog@302b0000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x302b0000 0x10000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG4_ROOT_CLK>; + status = "disabled"; + }; + + iomuxc_lpsr: iomuxc-lpsr@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; + }; + + gpt1: gpt@302d0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx31-gpt"; + reg = <0x302d0000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_GPT1_ROOT_CLK>, + <&clks IMX7D_GPT1_ROOT_CLK>, + <&clks IMX7D_GPT_3M_CLK>; + clock-names = "ipg", "per", "osc_per"; + }; + + gpt2: gpt@302e0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx31-gpt"; + reg = <0x302e0000 0x10000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt3: gpt@302f0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx31-gpt"; + reg = <0x302f0000 0x10000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt4: gpt@30300000 { + compatible = "fsl,imx7d-gpt", "fsl,imx31-gpt"; + reg = <0x30300000 0x10000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + kpp: kpp@30320000 { + compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp"; + reg = <0x30320000 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>; + status = "disabled"; + }; + + iomuxc: iomuxc@30330000 { + compatible = "fsl,imx7d-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + gpr: iomuxc-gpr@30340000 { + compatible = "fsl,imx7d-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + mqs: mqs { + compatible = "fsl,imx6sx-mqs"; + gpr = <&gpr>; + status = "disabled"; + }; + + ocotp: ocotp-ctrl@30350000 { + compatible = "fsl,imx7d-ocotp", "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clks IMX7D_OCOTP_CLK>; + }; + + anatop: anatop@30360000 { + compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x30360000 0x10000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + reg_1p0d: regulator-vdd1p0d@210 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p0d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + anatop-reg-offset = <0x210>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <8>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1200000>; + anatop-enable-bit = <31>; + }; + + reg_1p2: regulator-vdd1p2@220 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + anatop-reg-offset = <0x220>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <8>; + anatop-min-voltage = <1100000>; + anatop-max-voltage = <1300000>; + anatop-enable-bit = <31>; + }; + }; + + tempmon: tempmon { + compatible = "fsl,imx7d-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon =<&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; + }; + + caam_snvs: caam-snvs@30370000 { + compatible = "fsl,imx6q-caam-snvs"; + reg = <0x30370000 0x10000>; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; + + snvs_rtc: snvs-rtc-lp{ + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap =<&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup; + }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x61>; + }; + }; + + clks: ccm@30380000 { + compatible = "fsl,imx7d-ccm"; + reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>; + clock-names = "ckil", "osc"; + }; + + src: src@30390000 { + compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon"; + reg = <0x30390000 0x10000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + + gpc: gpc@303a0000 { + compatible = "fsl,imx7d-gpc"; + reg = <0x303a0000 0x10000>; + interrupt-controller; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + fsl,mf-mix-wakeup-irq = <0x54010000 0xc00 0x0 0x1040640>; + mipi-phy-supply = <®_1p0d>; + pcie-phy-supply = <®_1p0d>; + vcc-supply = <®_1p2>; + }; + }; + + aips2: aips-bus@30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30400000 0x400000>; + ranges; + + adc1: adc@30610000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30610000 0x10000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + num-channels = <4>; + clock-names = "adc"; + status = "disabled"; + }; + + adc2: adc@30620000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30620000 0x10000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + num-channels = <4>; + clock-names = "adc"; + status = "disabled"; + }; + + ecspi4: ecspi@30630000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x30630000 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>, + <&clks IMX7D_ECSPI4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + flextimer1: flextimer@30640000 { + compatible = "fsl,imx7d-flextimer"; + reg = <0x30640000 0x10000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + flextimer2: flextimer@30650000 { + compatible = "fsl,imx7d-flextimer"; + reg = <0x30650000 0x10000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pwm1: pwm@30660000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM1_ROOT_CLK>, + <&clks IMX7D_PWM1_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM2_ROOT_CLK>, + <&clks IMX7D_PWM2_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM3_ROOT_CLK>, + <&clks IMX7D_PWM3_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM4_ROOT_CLK>, + <&clks IMX7D_PWM4_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + system_counter_rd: system-counter-rd@306a0000 { + compatible = "fsl,imx7d-system-counter-rd"; + reg = <0x306a0000 0x10000>; + status = "disabled"; + }; + + system_counter_cmp: system-counter-cmp@306b0000 { + compatible = "fsl,imx7d-system-counter-cmp"; + reg = <0x306b0000 0x10000>; + status = "disabled"; + }; + + system_counter_ctrl: system-counter-ctrl@306c0000 { + compatible = "fsl,imx7d-system-counter-ctrl"; + reg = <0x306c0000 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + epdc: epdc@306f0000 { + compatible = "fsl,imx7d-epdc"; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x306f0000 0x10000>; + clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_EPDC_PIXEL_ROOT_CLK>; + clock-names = "epdc_axi", "epdc_pix"; + epdc-ram = <&gpr 0x4 30>; + status = "disabled"; + }; + + epxp: epxp@30700000 { + compatible = "fsl,imx7d-pxp-dma"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x30700000 0x10000>; + clocks = <&clks IMX7D_PXP_IPG_CLK>, <&clks IMX7D_PXP_AXI_CLK>; + clock-names = "pxp_ipg", "pxp_axi"; + status = "disabled"; + }; + + csi1: csi@30710000 { + compatible = "fsl,imx7d-csi", "fsl,imx6s-csi"; + reg = <0x30710000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CSI_MCLK_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "disp-axi", "csi_mclk", "disp_dcic"; + status = "disabled"; + }; + + lcdif: lcdif@30730000 { + compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; + reg = <0x30730000 0x10000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + mipi_csi: mipi-csi@30750000 { + compatible = "fsl,imx7d-mipi-csi"; + reg = <0x30750000 0x10000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_MIPI_CSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "mipi_clk", "phy_clk"; + mipi-phy-supply = <®_1p0d>; + csis-phy-reset = <&src 0x28 2>; + bus-width = <4>; + status = "disabled"; + }; + + mipi_dsi: mipi-dsi@30760000 { + compatible = "fsl,imx7d-mipi-dsi"; + reg = <0x30760000 0x10000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "mipi_cfg_clk", "mipi_pllref_clk"; + mipi-phy-supply = <®_1p0d>; + status = "disabled"; + }; + + ddrc: ddrc@307a0000 { + compatible = "fsl,imx7-ddrc"; + reg = <0x307a0000 0x10000>; + }; + }; + + aips3: aips-bus@30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30800000 0x400000>; + ranges; + + spba-bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30800000 0x100000>; + ranges; + + ecspi1: ecspi@30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, + <&clks IMX7D_ECSPI1_ROOT_CLK>; + clock-names = "ipg", "per"; + dmas = <&sdma 0 7 1>, <&sdma 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi2: ecspi@30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, + <&clks IMX7D_ECSPI2_ROOT_CLK>; + clock-names = "ipg", "per"; + dmas = <&sdma 2 7 1>, <&sdma 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi3: ecspi@30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, + <&clks IMX7D_ECSPI3_ROOT_CLK>; + clock-names = "ipg", "per"; + dmas = <&sdma 4 7 1>, <&sdma 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@30860000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART1_ROOT_CLK>, + <&clks IMX7D_UART1_ROOT_CLK>; + clock-names = "ipg", "per"; + dmas = <&sdma 22 4 0>, <&sdma 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART2_ROOT_CLK>, + <&clks IMX7D_UART2_ROOT_CLK>; + clock-names = "ipg", "per"; + dmas = <&sdma 24 4 0>, <&sdma 25 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART3_ROOT_CLK>, + <&clks IMX7D_UART3_ROOT_CLK>; + clock-names = "ipg", "per"; + dmas = <&sdma 26 4 0>, <&sdma 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai1: sai@308a0000 { + compatible = "fsl,imx7d-sai", + "fsl,imx6sx-sai"; + reg = <0x308a0000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_SAI1_IPG_CLK>, + <&clks IMX7D_SAI1_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 8 24 0>, <&sdma 9 24 0>; + status = "disabled"; + }; + + sai2: sai@308b0000 { + compatible = "fsl,imx7d-sai", + "fsl,imx6sx-sai"; + reg = <0x308b0000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_SAI2_IPG_CLK>, + <&clks IMX7D_SAI2_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 10 24 0>, <&sdma 11 24 0>; + status = "disabled"; + }; + + sai3: sai@308c0000 { + compatible = "fsl,imx7d-sai", + "fsl,imx6sx-sai"; + reg = <0x308c0000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_SAI3_IPG_CLK>, + <&clks IMX7D_SAI3_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 12 24 0>, <&sdma 13 24 0>; + status = "disabled"; + }; + }; + + crypto: caam@30900000 { + compatible = "fsl,imx7d-caam", "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30900000 0x40000>; + ranges = <0 0x30900000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CAAM_CLK>, + <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; + clock-names = "caam_ipg", "caam_aclk"; + + sec_jr0: jr0@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr1@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr2@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + flexcan1: can@30a00000 { + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; + reg = <0x30a00000 0x10000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CAN1_ROOT_CLK>; + clock-names = "ipg", "per"; + stop-mode = <&gpr 0x10 1 0x10 17>; + status = "disabled"; + }; + + flexcan2: can@30a10000 { + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; + reg = <0x30a10000 0x10000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CAN2_ROOT_CLK>; + clock-names = "ipg", "per"; + stop-mode = <&gpr 0x10 2 0x10 18>; + status = "disabled"; + }; + + i2c1: i2c@30a20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a20000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C1_ROOT_CLK>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a30000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C2_ROOT_CLK>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C3_ROOT_CLK>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a50000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C4_ROOT_CLK>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x30a60000 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART4_ROOT_CLK>, + <&clks IMX7D_UART4_ROOT_CLK>; + clock-names = "ipg", "per"; + dmas = <&sdma 28 4 0>, <&sdma 29 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart5: serial@30a70000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x30a70000 0x10000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART5_ROOT_CLK>, + <&clks IMX7D_UART5_ROOT_CLK>; + clock-names = "ipg", "per"; + dmas = <&sdma 30 4 0>, <&sdma 31 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart6: serial@30a80000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x30a80000 0x10000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART6_ROOT_CLK>, + <&clks IMX7D_UART6_ROOT_CLK>; + clock-names = "ipg", "per"; + dmas = <&sdma 32 4 0>, <&sdma 33 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart7: serial@30a90000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x30a90000 0x10000>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART7_ROOT_CLK>, + <&clks IMX7D_UART7_ROOT_CLK>; + clock-names = "ipg", "per"; + dmas = <&sdma 34 4 0>, <&sdma 35 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + mu: mu@30aa0000 { + compatible = "fsl,imx7d-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_MU_ROOT_CLK>; + clock-names = "mu"; + status = "okay"; + }; + + rpmsg: rpmsg{ + compatible = "fsl,imx7d-rpmsg"; + status = "disabled"; + }; + + sema4: sema4@30ac0000 { + compatible = "fsl,imx7d-sema4"; + reg = <0x30ac0000 0x10000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_SEMA4_HS_ROOT_CLK>; + clock-names = "sema4"; + status = "okay"; + }; + + usbotg1: usb@30b10000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b10000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphy_nop1>; + fsl,usbmisc = <&usbmisc1 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbh: usb@30b30000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b30000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphy_nop3>; + fsl,usbmisc = <&usbmisc3 0>; + phy_type = "hsic"; + dr_mode = "host"; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbmisc1: usbmisc@30b10200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b10200 0x200>; + }; + + usbmisc3: usbmisc@30b30200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b30200 0x200>; + }; + + usbphy_nop1: usbphy_nop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY1_CLK>; + clock-names = "main_clk"; + }; + + usbphy_nop3: usbphy_nop3 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; + clock-names = "main_clk"; + vcc-supply = <®_1p2>; + }; + + usdhc1: usdhc@30b40000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, + <&clks IMX7D_USDHC1_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@30b50000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, + <&clks IMX7D_USDHC2_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: usdhc@30b60000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x30b60000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, + <&clks IMX7D_USDHC3_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + sim1: sim@30b90000 { + compatible = "fsl,imx7d-sim"; + reg = <0x30b90000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_SIM1_ROOT_CLK>; + clock-names = "sim"; + status = "disabled"; + }; + + sim2: sim@30ba0000 { + compatible = "fsl,imx7d-sim"; + reg = <0x30ba0000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + qspi1: qspi@30bb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-qspi"; + reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_QSPI_ROOT_CLK>, + <&clks IMX7D_QSPI_ROOT_CLK>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + weim: weim@30bc0000 { + compatible = "fsl,imx7d-weim", "fsl,imx6sx-weim", "fsl,imx6q-weim"; + reg = <0x30bc0000 0x10000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_EIM_ROOT_CLK>; + status = "disabled"; + }; + + sdma: sdma@30bd0000 { + compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; + reg = <0x30bd0000 0x10000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_SDMA_CORE_CLK>, + <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + iram = <&ocram>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + stop-mode = <&gpr 0x10 3>; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + fsl,wakeup_irq = <2>; + status = "disabled"; + }; + }; + + pcie: pcie@0x33800000 { + compatible = "fsl,imx7d-pcie", "snps,dw-pcie"; + reg = <0x33800000 0x4000>, <0x4ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O 64KB */ + 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ + num-lanes = <1>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, + <&clks IMX7D_PCIE_PHY_ROOT_CLK>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; + pcie-phy-supply = <®_1p0d>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/configs/colibri_imx7_defconfig b/arch/arm/configs/colibri_imx7_defconfig new file mode 100644 index 000000000000..72e8fda63f89 --- /dev/null +++ b/arch/arm/configs/colibri_imx7_defconfig @@ -0,0 +1,387 @@ +CONFIG_KERNEL_LZO=y +CONFIG_SYSVIPC=y +CONFIG_FHANDLE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_CGROUPS=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_SCHED=y +CONFIG_NAMESPACES=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_XZ is not set +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MXC=y +CONFIG_SOC_IMX7D=y +# CONFIG_ARM_ERRATA_643719 is not set +CONFIG_SMP=y +# CONFIG_ARM_CPU_TOPOLOGY is not set +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_VMSPLIT_2G=y +CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_AEABI=y +CONFIG_CMA=y +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_ARM_IMX7D_CPUFREQ=y +CONFIG_CPU_IDLE=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_BINFMT_MISC=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_NET_IPGRE_DEMUX=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_IPV6=y +CONFIG_NETFILTER=y +CONFIG_BRIDGE_NETFILTER=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_TABLES=y +CONFIG_NF_TABLES_INET=y +CONFIG_NFT_MASQ=y +CONFIG_NFT_NAT=y +CONFIG_NETFILTER_XT_TARGET_CONNMARK=y +CONFIG_NETFILTER_XT_MATCH_CONNMARK=y +CONFIG_NETFILTER_XT_MATCH_NFACCT=y +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NFT_CHAIN_NAT_IPV4=y +CONFIG_NFT_MASQ_IPV4=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_NAT=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_IP6_NF_IPTABLES=y +CONFIG_NF_TABLES_BRIDGE=y +CONFIG_L2TP=m +CONFIG_BRIDGE=y +# CONFIG_BRIDGE_IGMP_SNOOPING is not set +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_VLAN_8021Q=y +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_CAN=m +CONFIG_CAN_FLEXCAN=m +CONFIG_CAN_MCP251X=m +CONFIG_CFG80211=m +CONFIG_MAC80211=m +CONFIG_RFKILL=y +CONFIG_RFKILL_INPUT=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=256 +CONFIG_CMA_SIZE_PERCENTAGE=50 +CONFIG_CMA_SIZE_SEL_MIN=y +CONFIG_IMX_WEIM=y +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_GPMI_NAND=y +CONFIG_MTD_NAND_MXC=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y +CONFIG_SCSI=y +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_SCAN_ASYNC=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_HISILICON is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_ROCKER is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_MICREL_PHY=y +CONFIG_PPP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_MPPE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_USB_NET_DRIVERS=m +CONFIG_USB_USBNET=m +# CONFIG_USB_NET_CDC_NCM is not set +# CONFIG_USB_NET_NET1080 is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_ZAURUS is not set +CONFIG_USB_ZD1201=m +CONFIG_RT2X00=m +CONFIG_RT2800USB=m +CONFIG_RTL8192CU=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_INPUT_POLLDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_IMX=y +# CONFIG_MOUSE_PS2 is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_AD7879=y +CONFIG_TOUCHSCREEN_AD7879_I2C=y +CONFIG_TOUCHSCREEN_FUSION_F0710A=m +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_FSL_OTP=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_HELPER_AUTO is not set +CONFIG_I2C_IMX=y +CONFIG_SPI=y +CONFIG_SPI_GPIO=y +CONFIG_SPI_IMX=y +CONFIG_SPI_SPIDEV=y +CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_GPIO_RESTART=y +CONFIG_POWER_RESET_SYSCON_POWEROFF=y +# CONFIG_MXC_MMA8451 is not set +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y +CONFIG_IMX_THERMAL=y +CONFIG_DEVICE_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_RN5T618_WATCHDOG=y +CONFIG_IMX2_WDT=y +CONFIG_MFD_RN5T618=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_DEBUG=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_ANATOP=y +CONFIG_REGULATOR_RN5T618=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m +# CONFIG_USB_GSPCA is not set +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_MXC_PXP_V4L2=y +CONFIG_SOC_CAMERA=y +CONFIG_VIDEO_MX3=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_CODA=y +CONFIG_SOC_CAMERA_OV2640=y +CONFIG_FB=y +# CONFIG_FB_MX3 is not set +CONFIG_FB_MXS=y +# CONFIG_FB_MXC_EDID is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=y +CONFIG_SND_SOC_FSL_ASRC=y +CONFIG_SND_SOC_FSL_SAI=y +CONFIG_SND_SOC_FSL_SPDIF=y +CONFIG_SND_SOC_FSL_ESAI=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_SOC_IMX_SGTL5000=y +CONFIG_SND_SOC_CS42XX8_I2C=y +CONFIG_HIDRAW=y +CONFIG_HID_MULTITOUCH=m +CONFIG_USB_HIDDEV=y +CONFIG_USB=y +CONFIG_USB_OTG_FSM=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MXC=y +CONFIG_USB_ACM=m +CONFIG_USB_WDM=m +CONFIG_USB_STORAGE=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_PL2303=y +CONFIG_USB_SERIAL_OPTION=m +CONFIG_NOP_USB_XCEIV=y +CONFIG_USB_MXS_PHY=y +CONFIG_USB_GADGET=y +CONFIG_USB_CONFIGFS=m +CONFIG_USB_CONFIGFS_SERIAL=y +CONFIG_USB_CONFIGFS_ACM=y +CONFIG_USB_CONFIGFS_OBEX=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_ECM_SUBSET=y +CONFIG_USB_CONFIGFS_RNDIS=y +CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_MASS_STORAGE=y +CONFIG_USB_CONFIGFS_F_LB_SS=y +CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_G_NCM=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y +CONFIG_MXC_SIM=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_SNVS=y +CONFIG_DMADEVICES=y +CONFIG_MXC_PXP_V2=y +CONFIG_MXC_PXP_V3=y +CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_IIO=y +CONFIG_IMX7D_ADC=y +CONFIG_VF610_ADC=y +CONFIG_PWM=y +CONFIG_PWM_IMX=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_CUSE=y +CONFIG_OVERLAY_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_NTFS_RW=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_UBIFS_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_ROOT_NFS=y +CONFIG_CIFS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10 +# CONFIG_SCHED_DEBUG is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_RCU_CPU_STALL_INFO is not set +# CONFIG_FTRACE is not set +CONFIG_CORESIGHT=y +CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y +CONFIG_CORESIGHT_SINK_TPIU=y +CONFIG_CORESIGHT_SINK_ETBV10=y +CONFIG_CORESIGHT_SOURCE_ETM3X=y +CONFIG_SECURITYFS=y +CONFIG_CRYPTO_USER=y +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_CCM=y +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTS=y +CONFIG_CRYPTO_LRW=y +CONFIG_CRYPTO_XTS=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_RMD128=y +CONFIG_CRYPTO_RMD160=y +CONFIG_CRYPTO_RMD256=y +CONFIG_CRYPTO_RMD320=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_TGR192=y +CONFIG_CRYPTO_WP512=y +CONFIG_CRYPTO_BLOWFISH=y +CONFIG_CRYPTO_CAMELLIA=y +CONFIG_CRYPTO_TWOFISH=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_FSL_CAAM=y +CONFIG_CRYPTO_DEV_FSL_CAAM_SM=y +CONFIG_CRYPTO_DEV_FSL_CAAM_SM_TEST=m +CONFIG_CRC_CCITT=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 71624b14f4f7..412efc4d7b30 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -82,6 +82,8 @@ static void clk_gate2_do_shared_clks(struct clk_hw *hw, bool enable) clk_gate2_do_hardware(gate, enable); imx_sema4_mutex_unlock(amp_power_mutex); +#else + clk_gate2_do_hardware(gate, enable); #endif } else { clk_gate2_do_hardware(gate, enable); diff --git a/arch/arm/mach-imx/clk-pfd.c b/arch/arm/mach-imx/clk-pfd.c index 5eeed8bc47c4..ad8ba14e698c 100644 --- a/arch/arm/mach-imx/clk-pfd.c +++ b/arch/arm/mach-imx/clk-pfd.c @@ -77,6 +77,8 @@ static void clk_pfd_do_shared_clks(struct clk_hw *hw, bool enable) clk_pfd_do_hardware(pfd, enable); imx_sema4_mutex_unlock(amp_power_mutex); +#else + clk_pfd_do_hardware(pfd, enable); #endif } else { clk_pfd_do_hardware(pfd, enable); diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c index f058bedfe214..c46ffbf5d891 100644 --- a/arch/arm/mach-imx/clk-pllv3.c +++ b/arch/arm/mach-imx/clk-pllv3.c @@ -130,6 +130,8 @@ static void clk_pllv3_do_shared_clks(struct clk_hw *hw, bool enable) clk_pllv3_do_hardware(hw, enable); imx_sema4_mutex_unlock(amp_power_mutex); +#else + clk_pllv3_do_hardware(hw, enable); #endif } else { clk_pllv3_do_hardware(hw, enable); diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index 8c5b71eb01e8..c3a51f59980c 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -10,6 +10,7 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <linux/clk.h> #include <linux/phy.h> #include <linux/pm_opp.h> #include <linux/regmap.h> @@ -95,15 +96,38 @@ static void __init imx7d_enet_mdio_fixup(void) static void __init imx7d_enet_clk_sel(void) { + struct device_node *np; + struct clk *enet_out_clk; struct regmap *gpr; + np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-fec"); + if (!np) { + pr_warn("%s: failed to find fec node\n", __func__); + return; + } + + enet_out_clk = of_clk_get_by_name(np, "enet_out"); + gpr = syscon_regmap_lookup_by_compatible("fsl,imx7d-iomuxc-gpr"); + if (!IS_ERR(gpr)) { - regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_TX_CLK_SEL_MASK, 0); - regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_CLK_DIR_MASK, 0); + if (IS_ERR(enet_out_clk)) { + pr_info("%s: failed to get enet_out clock, assuming ext. clock source\n", __func__); + /* use external clock for PHY */ + regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_TX_CLK_SEL_MASK, IMX7D_GPR1_ENET_TX_CLK_SEL_MASK); + regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_CLK_DIR_MASK, 0); + } else { + pr_info("%s: found enet_out clock, assuming internal clock source\n", __func__); + /* use internal clock generation and output it to PHY */ + regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_TX_CLK_SEL_MASK, 0); + regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_CLK_DIR_MASK, IMX7D_GPR1_ENET1_CLK_DIR_MASK); + clk_put(enet_out_clk); + + } } else { pr_err("failed to find fsl,imx7d-iomux-gpr regmap\n"); } + of_node_put(np); } static inline void imx7d_enet_init(void) diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index a3a572352769..80bcfd1d023e 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -279,7 +279,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) -#include <linux/spi/ad7879.h> +#include <linux/platform_data/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index d4219e8e5ab8..571edfd2ecf3 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -477,7 +477,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) -#include <linux/spi/ad7879.h> +#include <linux/platform_data/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c index a0f5856a5ff8..c1acce4c2e45 100644 --- a/arch/blackfin/mach-bf527/boards/tll6527m.c +++ b/arch/blackfin/mach-bf527/boards/tll6527m.c @@ -29,7 +29,7 @@ #include <asm/dpmc.h> #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) -#include <linux/spi/ad7879.h> +#include <linux/platform_data/ad7879.h> #define LCD_BACKLIGHT_GPIO 0x40 /* TLL6527M uses TLL7UIQ35 / ADI LCD EZ Extender. AD7879 AUX GPIO is used for * LCD Backlight Enable diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 88a19fc9844d..cb1b6a9ee4f2 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -776,7 +776,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) -#include <linux/spi/ad7879.h> +#include <linux/platform_data/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index ae2fcbb00119..4a03c4465dbe 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -521,7 +521,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #endif /* CONFIG_SPI_BFIN5XX */ #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) -#include <linux/spi/ad7879.h> +#include <linux/platform_data/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 8476889fcdb5..8caa2f4db800 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -292,12 +292,13 @@ config IMX_DMA config MXS_DMA bool "MXS DMA support" - depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6 + depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6 || SOC_IMX7 select STMP_DEVICE select DMA_ENGINE help Support the MXS DMA engine. This engine including APBH-DMA - and APBX-DMA is integrated into Freescale i.MX23/28/MX6Q/MX6DL chips. + and APBX-DMA is integrated into Freescale i.MX23/28/MX6Q/MX6DL/ + MX7D chips. config EP93XX_DMA bool "Cirrus Logic EP93xx DMA support" diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 374e3f4f6797..72d5df0ef0db 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -618,6 +618,13 @@ config TOUCHSCREEN_MIGOR To compile this driver as a module, choose M here: the module will be called migor_ts. +config TOUCHSCREEN_FUSION_F0710A + tristate "TouchRevolution Fusion F0710A Touchscreens" + depends on I2C + help + Say Y here if you want to support the multi-touch input driver for + the TouchRevolution Fusion 7 and 10 panels. + config TOUCHSCREEN_TOUCHRIGHT tristate "Touchright serial touchscreen" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 1c422b8ab512..8422e4ae7377 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -86,3 +86,4 @@ obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o obj-$(CONFIG_TOUCHSCREEN_SX8654) += sx8654.o obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o +obj-$(CONFIG_TOUCHSCREEN_FUSION_F0710A) += fusion_F0710A.o diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c index dcf390771549..1c4826976a62 100644 --- a/drivers/input/touchscreen/ad7879-i2c.c +++ b/drivers/input/touchscreen/ad7879-i2c.c @@ -10,6 +10,7 @@ #include <linux/i2c.h> #include <linux/module.h> #include <linux/types.h> +#include <linux/of.h> #include <linux/pm.h> #include "ad7879.h" @@ -91,11 +92,20 @@ static const struct i2c_device_id ad7879_id[] = { }; MODULE_DEVICE_TABLE(i2c, ad7879_id); +#ifdef CONFIG_OF +static const struct of_device_id ad7879_i2c_dt_ids[] = { + { .compatible = "adi,ad7879-1", }, + { } +}; +MODULE_DEVICE_TABLE(of, ad7879_i2c_dt_ids); +#endif + static struct i2c_driver ad7879_i2c_driver = { .driver = { .name = "ad7879", .owner = THIS_MODULE, .pm = &ad7879_pm_ops, + .of_match_table = of_match_ptr(ad7879_i2c_dt_ids), }, .probe = ad7879_i2c_probe, .remove = ad7879_i2c_remove, diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c index 1a7b1143536e..12e63226428c 100644 --- a/drivers/input/touchscreen/ad7879-spi.c +++ b/drivers/input/touchscreen/ad7879-spi.c @@ -10,6 +10,7 @@ #include <linux/pm.h> #include <linux/spi/spi.h> #include <linux/module.h> +#include <linux/of.h> #include "ad7879.h" @@ -146,11 +147,20 @@ static int ad7879_spi_remove(struct spi_device *spi) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id ad7879_spi_dt_ids[] = { + { .compatible = "adi,ad7879", }, + { } +}; +MODULE_DEVICE_TABLE(of, ad7879_spi_dt_ids); +#endif + static struct spi_driver ad7879_spi_driver = { .driver = { .name = "ad7879", .owner = THIS_MODULE, .pm = &ad7879_pm_ops, + .of_match_table = of_match_ptr(ad7879_spi_dt_ids), }, .probe = ad7879_spi_probe, .remove = ad7879_spi_remove, diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index fec66ad80513..977f894da08e 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -31,7 +31,8 @@ #include <linux/i2c.h> #include <linux/gpio.h> -#include <linux/spi/ad7879.h> +#include <linux/input/touchscreen.h> +#include <linux/platform_data/ad7879.h> #include <linux/module.h> #include "ad7879.h" @@ -94,8 +95,8 @@ #define AD7879_TEMP_BIT (1<<1) enum { - AD7879_SEQ_XPOS = 0, - AD7879_SEQ_YPOS = 1, + AD7879_SEQ_YPOS = 0, + AD7879_SEQ_XPOS = 1, AD7879_SEQ_Z1 = 2, AD7879_SEQ_Z2 = 3, AD7879_NR_SENSE = 4, @@ -126,7 +127,6 @@ struct ad7879 { u8 pen_down_acc_interval; u8 median; u16 x_plate_ohms; - u16 pressure_max; u16 cmd_crtl1; u16 cmd_crtl2; u16 cmd_crtl3; @@ -170,10 +170,10 @@ static int ad7879_report(struct ad7879 *ts) * filter. The combination of these two techniques provides a robust * solution, discarding the spurious noise in the signal and keeping * only the data of interest. The size of both filters is - * programmable. (dev.platform_data, see linux/spi/ad7879.h) Other - * user-programmable conversion controls include variable acquisition - * time, and first conversion delay. Up to 16 averages can be taken - * per conversion. + * programmable. (dev.platform_data, see linux/platform_data/ad7879.h) + * Other user-programmable conversion controls include variable + * acquisition time, and first conversion delay. Up to 16 averages can + * be taken per conversion. */ if (likely(x && z1)) { @@ -186,7 +186,7 @@ static int ad7879_report(struct ad7879 *ts) * Sample found inconsistent, pressure is beyond * the maximum. Don't report it to user space. */ - if (Rt > ts->pressure_max) + if (Rt > input_abs_get_max(input_dev, ABS_PRESSURE)) return -EINVAL; /* @@ -469,7 +469,7 @@ static void ad7879_gpio_remove(struct ad7879 *ts) { const struct ad7879_platform_data *pdata = dev_get_platdata(ts->dev); - if (pdata->gpio_export) + if (pdata && pdata->gpio_export) gpiochip_remove(&ts->gc); } @@ -485,6 +485,32 @@ static inline void ad7879_gpio_remove(struct ad7879 *ts) } #endif +static int ad7879_parse_dt(struct device *dev, struct ad7879 *ts) +{ + int err; + u32 tmp; + + err = device_property_read_u32(dev, "adi,resistance-plate-x", &tmp); + if (err) { + dev_err(dev, "failed to get resistance-plate-x property\n"); + return err; + } + ts->x_plate_ohms = (u16)tmp; + + device_property_read_u8(dev, "adi,first-conversion-delay", + &ts->first_conversion_delay); + device_property_read_u8(dev, "adi,acquisition-time", + &ts->acquisition_time); + device_property_read_u8(dev, "adi,median-filter-size", &ts->median); + device_property_read_u8(dev, "adi,averaging", &ts->averaging); + device_property_read_u8(dev, "adi,conversion-interval", + &ts->pen_down_acc_interval); + + ts->swap_xy = device_property_read_bool(dev, "touchscreen-swapped-x-y"); + + return 0; +} + struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, const struct ad7879_bus_ops *bops) { @@ -495,41 +521,44 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, u16 revid; if (!irq) { - dev_err(dev, "no IRQ?\n"); - err = -EINVAL; - goto err_out; + dev_err(dev, "No IRQ specified\n"); + return ERR_PTR(-EINVAL); } - if (!pdata) { - dev_err(dev, "no platform data?\n"); - err = -EINVAL; - goto err_out; + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return ERR_PTR(-ENOMEM); + + if (pdata) { + /* Platform data use swapped axis (backward compatibility) */ + ts->swap_xy = !pdata->swap_xy; + + ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; + + ts->first_conversion_delay = pdata->first_conversion_delay; + ts->acquisition_time = pdata->acquisition_time; + ts->averaging = pdata->averaging; + ts->pen_down_acc_interval = pdata->pen_down_acc_interval; + ts->median = pdata->median; + } else if (dev->of_node) { + ad7879_parse_dt(dev, ts); + } else { + dev_err(dev, "No platform data\n"); + return ERR_PTR(-EINVAL); } - ts = kzalloc(sizeof(*ts), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!ts || !input_dev) { - err = -ENOMEM; - goto err_free_mem; + input_dev = devm_input_allocate_device(dev); + if (!input_dev) { + dev_err(dev, "Failed to allocate input device\n"); + return ERR_PTR(-ENOMEM); } ts->bops = bops; ts->dev = dev; ts->input = input_dev; ts->irq = irq; - ts->swap_xy = pdata->swap_xy; setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts); - - ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; - ts->pressure_max = pdata->pressure_max ? : ~0; - - ts->first_conversion_delay = pdata->first_conversion_delay; - ts->acquisition_time = pdata->acquisition_time; - ts->averaging = pdata->averaging; - ts->pen_down_acc_interval = pdata->pen_down_acc_interval; - ts->median = pdata->median; - snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); input_dev->name = "AD7879 Touchscreen"; @@ -550,21 +579,33 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, __set_bit(EV_KEY, input_dev->evbit); __set_bit(BTN_TOUCH, input_dev->keybit); - input_set_abs_params(input_dev, ABS_X, - pdata->x_min ? : 0, - pdata->x_max ? : MAX_12BIT, - 0, 0); - input_set_abs_params(input_dev, ABS_Y, - pdata->y_min ? : 0, - pdata->y_max ? : MAX_12BIT, - 0, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, - pdata->pressure_min, pdata->pressure_max, 0, 0); + if (pdata) { + input_set_abs_params(input_dev, ABS_X, + pdata->x_min ? : 0, + pdata->x_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_Y, + pdata->y_min ? : 0, + pdata->y_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + pdata->pressure_min, + pdata->pressure_max ? : ~0, + 0, 0); + } else { + input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); + touchscreen_parse_of_params(input_dev); + if (!input_abs_get_max(input_dev, ABS_PRESSURE)) { + dev_err(dev, "Touchscreen pressure is not specified\n"); + return ERR_PTR(-EINVAL); + } + } err = ad7879_write(ts, AD7879_REG_CTRL2, AD7879_RESET); if (err < 0) { dev_err(dev, "Failed to write %s\n", input_dev->name); - goto err_free_mem; + return ERR_PTR(err); } revid = ad7879_read(ts, AD7879_REG_REVID); @@ -573,8 +614,7 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, if (input_dev->id.product != devid) { dev_err(dev, "Failed to probe %s (%x vs %x)\n", input_dev->name, devid, revid); - err = -ENODEV; - goto err_free_mem; + return ERR_PTR(-ENODEV); } ts->cmd_crtl3 = AD7879_YPLUS_BIT | @@ -594,23 +634,25 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, AD7879_ACQ(ts->acquisition_time) | AD7879_TMR(ts->pen_down_acc_interval); - err = request_threaded_irq(ts->irq, NULL, ad7879_irq, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - dev_name(dev), ts); + err = devm_request_threaded_irq(dev, ts->irq, NULL, ad7879_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(dev), ts); if (err) { - dev_err(dev, "irq %d busy?\n", ts->irq); - goto err_free_mem; + dev_err(dev, "Failed to request IRQ: %d\n", err); + return ERR_PTR(err); } __ad7879_disable(ts); err = sysfs_create_group(&dev->kobj, &ad7879_attr_group); if (err) - goto err_free_irq; + goto err_out; - err = ad7879_gpio_add(ts, pdata); - if (err) - goto err_remove_attr; + if (pdata) { + err = ad7879_gpio_add(ts, pdata); + if (err) + goto err_remove_attr; + } err = input_register_device(input_dev); if (err) @@ -622,11 +664,6 @@ err_remove_gpio: ad7879_gpio_remove(ts); err_remove_attr: sysfs_remove_group(&dev->kobj, &ad7879_attr_group); -err_free_irq: - free_irq(ts->irq, ts); -err_free_mem: - input_free_device(input_dev); - kfree(ts); err_out: return ERR_PTR(err); } @@ -636,9 +673,6 @@ void ad7879_remove(struct ad7879 *ts) { ad7879_gpio_remove(ts); sysfs_remove_group(&ts->dev->kobj, &ad7879_attr_group); - free_irq(ts->irq, ts); - input_unregister_device(ts->input); - kfree(ts); } EXPORT_SYMBOL(ad7879_remove); diff --git a/drivers/input/touchscreen/fusion_F0710A.c b/drivers/input/touchscreen/fusion_F0710A.c new file mode 100644 index 000000000000..779c3e83a402 --- /dev/null +++ b/drivers/input/touchscreen/fusion_F0710A.c @@ -0,0 +1,510 @@ +/* + * "fusion_F0710A" touchscreen driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <asm/irq.h> +#include <linux/gpio.h> +#include <linux/input/fusion_F0710A.h> +#include <linux/input/mt.h> +#include <linux/slab.h> +#include <linux/of_gpio.h> + + +#include "fusion_F0710A.h" + +#define DRV_NAME "fusion_F0710A" +#define MAX_TOUCHES 2 + +static struct fusion_F0710A_data fusion_F0710A; + +static unsigned short normal_i2c[] = { fusion_F0710A_I2C_SLAVE_ADDR, I2C_CLIENT_END }; + +static int fusion_F0710A_write_u8(u8 addr, u8 data) +{ + return i2c_smbus_write_byte_data(fusion_F0710A.client, addr, data); +} + +static int fusion_F0710A_read_u8(u8 addr) +{ + return i2c_smbus_read_byte_data(fusion_F0710A.client, addr); +} + +static int fusion_F0710A_read_block(u8 addr, u8 len, u8 *data) +{ + u8 msgbuf0[1] = { addr }; + u16 slave = fusion_F0710A.client->addr; + u16 flags = fusion_F0710A.client->flags; + struct i2c_msg msg[2] = { { slave, flags, 1, msgbuf0 }, + { slave, flags | I2C_M_RD, len, data } + }; + + return i2c_transfer(fusion_F0710A.client->adapter, msg, ARRAY_SIZE(msg)); +} + +static int fusion_F0710A_register_input(void) +{ + int ret; + struct input_dev *dev; + + dev = fusion_F0710A.input = input_allocate_device(); + if (dev == NULL) + return -ENOMEM; + + dev->name = "fusion_F0710A"; + + set_bit(EV_KEY, dev->evbit); + set_bit(EV_ABS, dev->evbit); + set_bit(EV_SYN, dev->evbit); + set_bit(BTN_TOUCH, dev->keybit); + + input_mt_init_slots(dev, MAX_TOUCHES, 0); + input_set_abs_params(dev, ABS_MT_POSITION_X, 0, fusion_F0710A.info.xres-1, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, fusion_F0710A.info.yres-1, 0, 0); + input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0); + + input_set_abs_params(dev, ABS_X, 0, fusion_F0710A.info.xres-1, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, fusion_F0710A.info.yres-1, 0, 0); + input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); + + ret = input_register_device(dev); + if (ret < 0) + goto bail1; + + return 0; + +bail1: + input_free_device(dev); + return ret; +} + +static void fusion_F0710A_reset(void) +{ + /* Generate a 0 => 1 edge explicitly, and wait for startup... */ + gpio_set_value(fusion_F0710A.gpio_reset, 0); + msleep(10); + gpio_set_value(fusion_F0710A.gpio_reset, 1); + /* Wait for startup (up to 125ms according to datasheet) */ + msleep(125); +} + +#define WC_RETRY_COUNT 3 +static int fusion_F0710A_write_complete(void) +{ + int ret, i; + + for(i=0; i<WC_RETRY_COUNT; i++) + { + ret = fusion_F0710A_write_u8(fusion_F0710A_SCAN_COMPLETE, 0); + if(ret == 0) + break; + else { + dev_warn(&fusion_F0710A.client->dev, + "Write complete failed(%d): %d. Resetting controller...\n", i, ret); + fusion_F0710A_reset(); + } + } + + return ret; +} + +#define DATA_START fusion_F0710A_DATA_INFO +#define DATA_END fusion_F0710A_SEC_TIDTS +#define DATA_LEN (DATA_END - DATA_START + 1) +#define DATA_OFF(x) ((x) - DATA_START) + +static int fusion_F0710A_read_sensor(void) +{ + int ret; + u8 data[DATA_LEN]; + +#define DATA(x) (data[DATA_OFF(x)]) + /* To ensure data coherency, read the sensor with a single transaction. */ + ret = fusion_F0710A_read_block(DATA_START, DATA_LEN, data); + if (ret < 0) { + dev_err(&fusion_F0710A.client->dev, + "Read block failed: %d\n", ret); + + return ret; + } + + fusion_F0710A.f_num = DATA(fusion_F0710A_DATA_INFO)&0x03; + + fusion_F0710A.y1 = DATA(fusion_F0710A_POS_X1_HI) << 8; + fusion_F0710A.y1 |= DATA(fusion_F0710A_POS_X1_LO); + fusion_F0710A.x1 = DATA(fusion_F0710A_POS_Y1_HI) << 8; + fusion_F0710A.x1 |= DATA(fusion_F0710A_POS_Y1_LO); + fusion_F0710A.z1 = DATA(fusion_F0710A_FIR_PRESS); + fusion_F0710A.tip1 = DATA(fusion_F0710A_FIR_TIDTS)&0x0f; + fusion_F0710A.tid1 = (DATA(fusion_F0710A_FIR_TIDTS)&0xf0)>>4; + + + fusion_F0710A.y2 = DATA(fusion_F0710A_POS_X2_HI) << 8; + fusion_F0710A.y2 |= DATA(fusion_F0710A_POS_X2_LO); + fusion_F0710A.x2 = DATA(fusion_F0710A_POS_Y2_HI) << 8; + fusion_F0710A.x2 |= DATA(fusion_F0710A_POS_Y2_LO); + fusion_F0710A.z2 = DATA(fusion_F0710A_SEC_PRESS); + fusion_F0710A.tip2 = DATA(fusion_F0710A_SEC_TIDTS)&0x0f; + fusion_F0710A.tid2 =(DATA(fusion_F0710A_SEC_TIDTS)&0xf0)>>4; +#undef DATA + + return 0; +} + +#define val_cut_max(x, max, reverse) \ +do \ +{ \ + if(x > max) \ + x = max; \ + if(reverse) \ + x = (max) - (x); \ +} \ +while(0) + +static void fusion_F0710A_wq(struct work_struct *work) +{ + struct input_dev *dev = fusion_F0710A.input; + + if (fusion_F0710A_read_sensor() < 0) + goto restore_irq; + +#ifdef DEBUG + printk(KERN_DEBUG "tip1, tid1, x1, y1, z1 (%x,%x,%d,%d,%d); tip2, tid2, x2, y2, z2 (%x,%x,%d,%d,%d)\n", + fusion_F0710A.tip1, fusion_F0710A.tid1, fusion_F0710A.x1, fusion_F0710A.y1, fusion_F0710A.z1, + fusion_F0710A.tip2, fusion_F0710A.tid2, fusion_F0710A.x2, fusion_F0710A.y2, fusion_F0710A.z2); +#endif /* DEBUG */ + + val_cut_max(fusion_F0710A.x1, fusion_F0710A.info.xres-1, fusion_F0710A.info.xy_reverse); + val_cut_max(fusion_F0710A.y1, fusion_F0710A.info.yres-1, fusion_F0710A.info.xy_reverse); + val_cut_max(fusion_F0710A.x2, fusion_F0710A.info.xres-1, fusion_F0710A.info.xy_reverse); + val_cut_max(fusion_F0710A.y2, fusion_F0710A.info.yres-1, fusion_F0710A.info.xy_reverse); + + if (fusion_F0710A.tid1) { + input_mt_slot(dev, fusion_F0710A.tid1 - 1); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, fusion_F0710A.tip1); + if (fusion_F0710A.tip1) { + input_report_abs(dev, ABS_MT_POSITION_X, fusion_F0710A.x1); + input_report_abs(dev, ABS_MT_POSITION_Y, fusion_F0710A.y1); + input_report_abs(dev, ABS_MT_PRESSURE, fusion_F0710A.z1); + } + } + + if (fusion_F0710A.tid2) { + input_mt_slot(dev, fusion_F0710A.tid2 - 1); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, fusion_F0710A.tip2); + if (fusion_F0710A.tip2) { + input_report_abs(dev, ABS_MT_POSITION_X, fusion_F0710A.x2); + input_report_abs(dev, ABS_MT_POSITION_Y, fusion_F0710A.y2); + input_report_abs(dev, ABS_MT_PRESSURE, fusion_F0710A.z2); + } + } + + input_mt_report_pointer_emulation(dev, false); + input_sync(dev); + +restore_irq: + enable_irq(fusion_F0710A.client->irq); + + /* Clear fusion_F0710A interrupt */ + fusion_F0710A_write_complete(); +} +static DECLARE_WORK(fusion_F0710A_work, fusion_F0710A_wq); + +static irqreturn_t fusion_F0710A_interrupt(int irq, void *dev_id) +{ + disable_irq_nosync(fusion_F0710A.client->irq); + + queue_work(fusion_F0710A.workq, &fusion_F0710A_work); + + return IRQ_HANDLED; +} + +const static u8* g_ver_product[4] = { + "10Z8", "70Z7", "43Z6", "" +}; + +static int of_fusion_F0710A_get_pins(struct device_node *np, + unsigned int *int_pin, unsigned int *reset_pin) +{ + if (of_gpio_count(np) < 2) + return -ENODEV; + + *int_pin = of_get_gpio(np, 0); + *reset_pin = of_get_gpio(np, 1); + + if (!gpio_is_valid(*int_pin) || !gpio_is_valid(*reset_pin)) { + pr_err("%s: invalid GPIO pins, int=%d/reset=%d\n", + np->full_name, *int_pin, *reset_pin); + return -ENODEV; + } + + return 0; +} + +static int fusion_F0710A_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + struct device_node *np = i2c->dev.of_node; + struct fusion_f0710a_init_data *pdata = i2c->dev.platform_data; + int ret; + u8 ver_product, ver_id; + u32 version; + + if (np != NULL) { + pdata = i2c->dev.platform_data = + devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL); + if (pdata == NULL) { + dev_err(&i2c->dev, "No platform data for Fusion driver\n"); + return -ENODEV; + } + /* the dtb did the pinmuxing for us */ + pdata->pinmux_fusion_pins = NULL; + ret = of_fusion_F0710A_get_pins(i2c->dev.of_node, + &pdata->gpio_int, &pdata->gpio_reset); + if (ret) + return ret; + } + else if (pdata == NULL) { + dev_err(&i2c->dev, "No platform data for Fusion driver\n"); + return -ENODEV; + } + + /* Request pinmuxing, if necessary */ + if (pdata->pinmux_fusion_pins != NULL) { + ret = pdata->pinmux_fusion_pins(); + if (ret < 0) { + dev_err(&i2c->dev, "muxing GPIOs failed\n"); + return -ENODEV; + } + } + + if ((gpio_request(pdata->gpio_int, "Fusion pen down interrupt") == 0) && + (gpio_direction_input(pdata->gpio_int) == 0)) { + gpio_export(pdata->gpio_int, 0); + } else { + dev_warn(&i2c->dev, "Could not obtain GPIO for Fusion pen down\n"); + return -ENODEV; + } + + if ((gpio_request(pdata->gpio_reset, "Fusion reset") == 0) && + (gpio_direction_output(pdata->gpio_reset, 1) == 0)) { + fusion_F0710A.gpio_reset = pdata->gpio_reset; + fusion_F0710A_reset(); + gpio_export(pdata->gpio_reset, 0); + } else { + dev_warn(&i2c->dev, "Could not obtain GPIO for Fusion reset\n"); + ret = -ENODEV; + goto bail0; + } + + /* Use Pen Down GPIO as sampling interrupt */ + i2c->irq = gpio_to_irq(pdata->gpio_int); + irq_set_irq_type(i2c->irq, IRQ_TYPE_LEVEL_HIGH); + + if(!i2c->irq) + { + dev_err(&i2c->dev, "fusion_F0710A irq < 0 \n"); + ret = -ENOMEM; + goto bail1; + } + + /* Attach the I2C client */ + fusion_F0710A.client = i2c; + i2c_set_clientdata(i2c, &fusion_F0710A); + + dev_info(&i2c->dev, "Touchscreen registered with bus id (%d) with slave address 0x%x\n", + i2c_adapter_id(fusion_F0710A.client->adapter), fusion_F0710A.client->addr); + + /* Read out a lot of registers */ + ret = fusion_F0710A_read_u8(fusion_F0710A_VIESION_INFO_LO); + if (ret < 0) { + dev_err(&i2c->dev, "query failed: %d\n", ret); + goto bail1; + } + ver_product = (((u8)ret) & 0xc0) >> 6; + version = (10 + ((((u32)ret)&0x30) >> 4)) * 100000; + version += (((u32)ret)&0xf) * 1000; + /* Read out a lot of registers */ + ret = fusion_F0710A_read_u8(fusion_F0710A_VIESION_INFO); + if (ret < 0) { + dev_err(&i2c->dev, "query failed: %d\n", ret); + goto bail1; + } + ver_id = ((u8)(ret) & 0x6) >> 1; + version += ((((u32)ret) & 0xf8) >> 3) * 10; + version += (((u32)ret) & 0x1) + 1; /* 0 is build 1, 1 is build 2 */ + dev_info(&i2c->dev, "version product %s(%d)\n", g_ver_product[ver_product] ,ver_product); + dev_info(&i2c->dev, "version id %s(%d)\n", ver_id ? "1.4" : "1.0", ver_id); + dev_info(&i2c->dev, "version series (%d)\n", version); + + switch(ver_product) + { + case fusion_F0710A_VIESION_07: /* 7 inch */ + fusion_F0710A.info.xres = fusion_F0710A07_XMAX; + fusion_F0710A.info.yres = fusion_F0710A07_YMAX; + fusion_F0710A.info.xy_reverse = fusion_F0710A07_REV; + break; + case fusion_F0710A_VIESION_43: /* 4.3 inch */ + fusion_F0710A.info.xres = fusion_F0710A43_XMAX; + fusion_F0710A.info.yres = fusion_F0710A43_YMAX; + fusion_F0710A.info.xy_reverse = fusion_F0710A43_REV; + break; + default: /* fusion_F0710A_VIESION_10 10 inch */ + fusion_F0710A.info.xres = fusion_F0710A10_XMAX; + fusion_F0710A.info.yres = fusion_F0710A10_YMAX; + fusion_F0710A.info.xy_reverse = fusion_F0710A10_REV; + break; + } + + /* Register the input device. */ + ret = fusion_F0710A_register_input(); + if (ret < 0) { + dev_err(&i2c->dev, "can't register input: %d\n", ret); + goto bail1; + } + + /* Create a worker thread */ + fusion_F0710A.workq = create_singlethread_workqueue(DRV_NAME); + if (fusion_F0710A.workq == NULL) { + dev_err(&i2c->dev, "can't create work queue\n"); + ret = -ENOMEM; + goto bail2; + } + + + /* Register for the interrupt and enable it. Our handler will + * start getting invoked after this call. */ + ret = request_irq(i2c->irq, fusion_F0710A_interrupt, IRQF_TRIGGER_RISING, + i2c->name, &fusion_F0710A); + if (ret < 0) { + dev_err(&i2c->dev, "can't get irq %d: %d\n", i2c->irq, ret); + goto bail3; + } + /* clear the irq first */ + ret = fusion_F0710A_write_u8(fusion_F0710A_SCAN_COMPLETE, 0); + if (ret < 0) { + dev_err(&i2c->dev, "Clear irq failed: %d\n", ret); + goto bail4; + } + + return 0; + +bail4: + free_irq(i2c->irq, &fusion_F0710A); + +bail3: + destroy_workqueue(fusion_F0710A.workq); + fusion_F0710A.workq = NULL; + +bail2: + input_unregister_device(fusion_F0710A.input); +bail1: + gpio_free(pdata->gpio_reset); +bail0: + gpio_free(pdata->gpio_int); + + return ret; +} + +#ifdef CONFIG_PM_SLEEP +static int fusion_F0710A_suspend(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + disable_irq(i2c->irq); + flush_workqueue(fusion_F0710A.workq); + + return 0; +} + +static int fusion_F0710A_resume(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + enable_irq(i2c->irq); + + return 0; +} +#endif + +static int fusion_F0710A_remove(struct i2c_client *i2c) +{ + struct fusion_f0710a_init_data *pdata = i2c->dev.platform_data; + + gpio_free(pdata->gpio_int); + gpio_free(pdata->gpio_reset); + destroy_workqueue(fusion_F0710A.workq); + free_irq(i2c->irq, &fusion_F0710A); + input_unregister_device(fusion_F0710A.input); + i2c_set_clientdata(i2c, NULL); + + dev_info(&i2c->dev, "driver removed\n"); + + return 0; +} + +static struct i2c_device_id fusion_F0710A_id[] = { + {"fusion_F0710A", 0}, + {}, +}; + + +static const struct of_device_id fusion_F0710A_dt_ids[] = { + { + .compatible = "touchrevolution,fusion-f0710a", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, fusion_F0710A_dt_ids); + +static const struct dev_pm_ops fusion_F0710A_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(fusion_F0710A_suspend, fusion_F0710A_resume) +}; + +static struct i2c_driver fusion_F0710A_i2c_drv = { + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + .pm = &fusion_F0710A_pm_ops, + .of_match_table = fusion_F0710A_dt_ids, + }, + .probe = fusion_F0710A_probe, + .remove = fusion_F0710A_remove, + .id_table = fusion_F0710A_id, + .address_list = normal_i2c, +}; + +static int __init fusion_F0710A_init( void ) +{ + int ret; + + memset(&fusion_F0710A, 0, sizeof(fusion_F0710A)); + + /* Probe for fusion_F0710A on I2C. */ + ret = i2c_add_driver(&fusion_F0710A_i2c_drv); + if (ret < 0) { + printk(KERN_WARNING DRV_NAME " can't add i2c driver: %d\n", ret); + } + + return ret; +} + +static void __exit fusion_F0710A_exit( void ) +{ + i2c_del_driver(&fusion_F0710A_i2c_drv); +} +module_init(fusion_F0710A_init); +module_exit(fusion_F0710A_exit); + +MODULE_DESCRIPTION("fusion_F0710A Touchscreen Driver"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/input/touchscreen/fusion_F0710A.h b/drivers/input/touchscreen/fusion_F0710A.h new file mode 100644 index 000000000000..3e5af9e72b78 --- /dev/null +++ b/drivers/input/touchscreen/fusion_F0710A.h @@ -0,0 +1,88 @@ +/* + * "fusion_F0710A" touchscreen driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* I2C slave address */ +#define fusion_F0710A_I2C_SLAVE_ADDR 0x10 + +/* I2C registers */ +#define fusion_F0710A_DATA_INFO 0x00 + +/* First Point*/ +#define fusion_F0710A_POS_X1_HI 0x01 /* 16-bit register, MSB */ +#define fusion_F0710A_POS_X1_LO 0x02 /* 16-bit register, LSB */ +#define fusion_F0710A_POS_Y1_HI 0x03 /* 16-bit register, MSB */ +#define fusion_F0710A_POS_Y1_LO 0x04 /* 16-bit register, LSB */ +#define fusion_F0710A_FIR_PRESS 0X05 +#define fusion_F0710A_FIR_TIDTS 0X06 + +/* Second Point */ +#define fusion_F0710A_POS_X2_HI 0x07 /* 16-bit register, MSB */ +#define fusion_F0710A_POS_X2_LO 0x08 /* 16-bit register, LSB */ +#define fusion_F0710A_POS_Y2_HI 0x09 /* 16-bit register, MSB */ +#define fusion_F0710A_POS_Y2_LO 0x0A /* 16-bit register, LSB */ +#define fusion_F0710A_SEC_PRESS 0x0B +#define fusion_F0710A_SEC_TIDTS 0x0C + +#define fusion_F0710A_VIESION_INFO_LO 0X0E +#define fusion_F0710A_VIESION_INFO 0X0F + +#define fusion_F0710A_RESET 0x10 +#define fusion_F0710A_SCAN_COMPLETE 0x11 + + +#define fusion_F0710A_VIESION_10 0 +#define fusion_F0710A_VIESION_07 1 +#define fusion_F0710A_VIESION_43 2 + +/* fusion_F0710A 10 inch panel */ +#define fusion_F0710A10_XMAX 2275 +#define fusion_F0710A10_YMAX 1275 +#define fusion_F0710A10_REV 1 + +/* fusion_F0710A 7 inch panel */ +#define fusion_F0710A07_XMAX 1500 +#define fusion_F0710A07_YMAX 900 +#define fusion_F0710A07_REV 0 + +/* fusion_F0710A 4.3 inch panel */ +#define fusion_F0710A43_XMAX 900 +#define fusion_F0710A43_YMAX 500 +#define fusion_F0710A43_REV 0 + +#define fusion_F0710A_SAVE_PT1 0x1 +#define fusion_F0710A_SAVE_PT2 0x2 + + + +/* fusion_F0710A touch screen information */ +struct fusion_F0710A_info { + int xres; /* x resolution */ + int yres; /* y resolution */ + int xy_reverse; /* if need reverse in the x,y value x=xres-1-x, y=yres-1-y*/ +}; + +struct fusion_F0710A_data { + struct fusion_F0710A_info info; + struct i2c_client *client; + struct workqueue_struct *workq; + struct input_dev *input; + int gpio_reset; + u16 x1; + u16 y1; + u8 z1; + u8 tip1; + u8 tid1; + u16 x2; + u16 y2; + u8 z2; + u8 tip2; + u8 tid2; + u8 f_num; + u8 save_points; +}; + diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 767c3f827b28..fbaa3444ade4 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -753,13 +753,14 @@ config MFD_RK808 including interrupts, RTC, LDO & DCDC regulators, and onkey. config MFD_RN5T618 - tristate "Ricoh RN5T5618 PMIC" + tristate "Ricoh RN5T567/618 PMIC" depends on I2C + depends on OF select MFD_CORE select REGMAP_I2C help - Say yes here to add support for the Ricoh RN5T618 PMIC. This - driver provides common support for accessing the device, + Say yes here to add support for the Ricoh RN5T567 or R5T618 PMIC. + This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c index 666857192dbe..0f6291a2c840 100644 --- a/drivers/mfd/rn5t618.c +++ b/drivers/mfd/rn5t618.c @@ -2,6 +2,7 @@ * MFD core driver for Ricoh RN5T618 PMIC * * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com> + * Copyright (C) 2016 Stefan Agner <stefan.agner@toradex.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -11,12 +12,17 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/delay.h> #include <linux/i2c.h> #include <linux/mfd/core.h> #include <linux/mfd/rn5t618.h> #include <linux/module.h> +#include <linux/of_device.h> +#include <linux/reboot.h> #include <linux/regmap.h> +#include <asm/system_misc.h> + static const struct mfd_cell rn5t618_cells[] = { { .name = "rn5t618-regulator" }, { .name = "rn5t618-wdt" }, @@ -48,23 +54,55 @@ static const struct regmap_config rn5t618_regmap_config = { }; static struct rn5t618 *rn5t618_pm_power_off; +static struct notifier_block rn5t618_restart_handler; -static void rn5t618_power_off(void) +static void rn5t618_trigger_poweroff_sequence(bool repower) { /* disable automatic repower-on */ regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_REPCNT, - RN5T618_REPCNT_REPWRON, 0); + RN5T618_REPCNT_REPWRON, repower); /* start power-off sequence */ regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_SLPCNT, RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF); } +static void rn5t618_power_off(void) +{ + rn5t618_trigger_poweroff_sequence(false); +} + +static int rn5t618_restart(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + rn5t618_trigger_poweroff_sequence(true); + + mdelay(10); + + return NOTIFY_DONE; +} + + +static const struct of_device_id rn5t618_of_match[] = { + { .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 }, + { .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 }, + { } +}; +MODULE_DEVICE_TABLE(of, rn5t618_of_match); + static int rn5t618_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { + const struct of_device_id *of_id = + of_match_device(rn5t618_of_match, &i2c->dev); struct rn5t618 *priv; int ret; + if (!of_id) { + dev_err(&i2c->dev, "Failed to find matching dt id\n"); + return -EINVAL; + } + + priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -78,6 +116,8 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c, return ret; } + priv->variant = (long)of_id->data; + ret = mfd_add_devices(&i2c->dev, -1, rn5t618_cells, ARRAY_SIZE(rn5t618_cells), NULL, 0, NULL); if (ret) { @@ -85,9 +125,22 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c, return ret; } - if (!pm_power_off) { - rn5t618_pm_power_off = priv; - pm_power_off = rn5t618_power_off; + rn5t618_pm_power_off = priv; + if (of_device_is_system_power_controller(i2c->dev.of_node)) { + if (!pm_power_off) + pm_power_off = rn5t618_power_off; + else + dev_err(&i2c->dev, "Failed to set poweroff capability, already defined\n"); + } + + rn5t618_restart_handler.notifier_call = rn5t618_restart; + rn5t618_restart_handler.priority = 128; + + ret = register_restart_handler(&rn5t618_restart_handler); + if (ret) { + dev_err(&i2c->dev, "%s: cannot register restart handler, %d\n", + __func__, ret); + return ret; } return 0; @@ -106,12 +159,6 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c) return 0; } -static const struct of_device_id rn5t618_of_match[] = { - { .compatible = "ricoh,rn5t618" }, - { } -}; -MODULE_DEVICE_TABLE(of, rn5t618_of_match); - static const struct i2c_device_id rn5t618_i2c_id[] = { { } }; @@ -130,5 +177,5 @@ static struct i2c_driver rn5t618_i2c_driver = { module_i2c_driver(rn5t618_i2c_driver); MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>"); -MODULE_DESCRIPTION("Ricoh RN5T618 MFD driver"); +MODULE_DESCRIPTION("Ricoh RN5T567/618 MFD driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/freescale/pinctrl-imx7d.c b/drivers/pinctrl/freescale/pinctrl-imx7d.c index fb5082711909..b5e3f116184d 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx7d.c +++ b/drivers/pinctrl/freescale/pinctrl-imx7d.c @@ -185,6 +185,17 @@ enum imx7d_lpsr_pads { MX7D_PAD_GPIO1_IO07 = 7, }; +enum imx7d_lpsr_gpr_pads { + MX7D_PAD_GPIO1_IO08_GPR = 0, + MX7D_PAD_GPIO1_IO09_GPR = 1, + MX7D_PAD_GPIO1_IO10_GPR = 2, + MX7D_PAD_GPIO1_IO11_GPR = 3, + MX7D_PAD_GPIO1_IO12_GPR = 4, + MX7D_PAD_GPIO1_IO13_GPR = 5, + MX7D_PAD_GPIO1_IO14_GPR = 6, + MX7D_PAD_GPIO1_IO15_GPR = 7, +}; + /* Pad names for the pinmux subsystem */ static const struct pinctrl_pin_desc imx7d_pinctrl_pads[] = { IMX_PINCTRL_PIN(MX7D_PAD_RESERVE0), @@ -356,6 +367,17 @@ static const struct pinctrl_pin_desc imx7d_lpsr_pinctrl_pads[] = { IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO07), }; +static const struct pinctrl_pin_desc imx7d_lpsr_gpr_pinctrl_pads[] = { + IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO08_GPR), + IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO09_GPR), + IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO10_GPR), + IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO11_GPR), + IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO12_GPR), + IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO13_GPR), + IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO14_GPR), + IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO15_GPR), +}; + static struct imx_pinctrl_soc_info imx7d_pinctrl_info = { .pins = imx7d_pinctrl_pads, .npins = ARRAY_SIZE(imx7d_pinctrl_pads), @@ -367,9 +389,16 @@ static struct imx_pinctrl_soc_info imx7d_lpsr_pinctrl_info = { .flags = ZERO_OFFSET_VALID, }; +static struct imx_pinctrl_soc_info imx7d_lpsr_gpr_pinctrl_info = { + .pins = imx7d_lpsr_gpr_pinctrl_pads, + .npins = ARRAY_SIZE(imx7d_lpsr_gpr_pinctrl_pads), + .flags = ZERO_OFFSET_VALID, +}; + static struct of_device_id imx7d_pinctrl_of_match[] = { { .compatible = "fsl,imx7d-iomuxc", .data = &imx7d_pinctrl_info, }, { .compatible = "fsl,imx7d-iomuxc-lpsr", .data = &imx7d_lpsr_pinctrl_info }, + { .compatible = "fsl,imx7d-lpsr-gpr", .data = &imx7d_lpsr_gpr_pinctrl_info }, { /* sentinel */ } }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index a2ac2ccf0d4e..58176224f650 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -537,10 +537,11 @@ config REGULATOR_RK808 outputs which can be controlled by i2c communication. config REGULATOR_RN5T618 - tristate "Ricoh RN5T618 voltage regulators" + tristate "Ricoh RN5T567/618 voltage regulators" depends on MFD_RN5T618 help - Say y here to support the regulators found on Ricoh RN5T618 PMIC. + Say y here to support the regulators found on Ricoh RN5T567 or + RN5T618 PMIC. config REGULATOR_RT5033 tristate "Richtek RT5033 Regulators" diff --git a/drivers/regulator/rn5t618-regulator.c b/drivers/regulator/rn5t618-regulator.c index b85ceb8ff911..bfaab67ffb1f 100644 --- a/drivers/regulator/rn5t618-regulator.c +++ b/drivers/regulator/rn5t618-regulator.c @@ -46,6 +46,23 @@ static struct regulator_ops rn5t618_reg_ops = { .vsel_mask = (vmask), \ } +static struct regulator_desc rn5t567_regulators[] = { + /* DCDC */ + REG(DCDC1, DC1CTL, BIT(0), DC1DAC, 0xff, 600000, 3500000, 12500), + REG(DCDC2, DC2CTL, BIT(0), DC2DAC, 0xff, 600000, 3500000, 12500), + REG(DCDC3, DC3CTL, BIT(0), DC3DAC, 0xff, 600000, 3500000, 12500), + REG(DCDC4, DC4CTL, BIT(0), DC4DAC, 0xff, 600000, 3500000, 12500), + /* LDO */ + REG(LDO1, LDOEN1, BIT(0), LDO1DAC, 0x7f, 900000, 3500000, 25000), + REG(LDO2, LDOEN1, BIT(1), LDO2DAC, 0x7f, 900000, 3500000, 25000), + REG(LDO3, LDOEN1, BIT(2), LDO3DAC, 0x7f, 600000, 3500000, 25000), + REG(LDO4, LDOEN1, BIT(3), LDO4DAC, 0x7f, 900000, 3500000, 25000), + REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 900000, 3500000, 25000), + /* LDO RTC */ + REG(LDORTC1, LDOEN2, BIT(4), LDORTCDAC, 0x7f, 1200000, 3500000, 25000), + REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000), +}; + static struct regulator_desc rn5t618_regulators[] = { /* DCDC */ REG(DCDC1, DC1CTL, BIT(0), DC1DAC, 0xff, 600000, 3500000, 12500), @@ -65,20 +82,35 @@ static struct regulator_desc rn5t618_regulators[] = { static int rn5t618_regulator_probe(struct platform_device *pdev) { struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent); - struct regulator_config config = { }; + struct regulator_config config = { .ena_gpio = -ENODEV }; struct regulator_dev *rdev; + struct regulator_desc *regulators; int i; + switch (rn5t618->variant) { + case RN5T567: + regulators = rn5t567_regulators; + break; + case RN5T618: + regulators = rn5t618_regulators; + break; + default: + return -EINVAL; + } + + config.dev = pdev->dev.parent; + config.regmap = rn5t618->regmap; + for (i = 0; i < RN5T618_REG_NUM; i++) { - config.dev = pdev->dev.parent; - config.regmap = rn5t618->regmap; + if (!regulators[i].name) + continue; rdev = devm_regulator_register(&pdev->dev, - &rn5t618_regulators[i], + ®ulators[i], &config); if (IS_ERR(rdev)) { dev_err(&pdev->dev, "failed to register %s regulator\n", - rn5t618_regulators[i].name); + regulators[i].name); return PTR_ERR(rdev); } } diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 8fab566e0f0b..aeb689eb4b7a 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -707,6 +707,7 @@ static struct class *spidev_class; #ifdef CONFIG_OF static const struct of_device_id spidev_dt_ids[] = { { .compatible = "rohm,dh2228fv" }, + { .compatible = "toradex,evalspi" }, {}, }; MODULE_DEVICE_TABLE(of, spidev_dt_ids); diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index d2898ec1b876..b1ba565af1ba 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -109,6 +109,7 @@ struct ci_hdrc_imx_data { /* --------------------------------- */ }; +#ifdef CONFIG_POWER_SUPPLY static char *imx_usb_charger_supplied_to[] = { "imx_usb_charger", }; @@ -118,6 +119,7 @@ static enum power_supply_property imx_usb_charger_power_props[] = { POWER_SUPPLY_PROP_ONLINE, /* VBUS online */ POWER_SUPPLY_PROP_CURRENT_MAX, /* Maximum current in mA */ }; +#endif static inline bool is_imx6q_con(struct ci_hdrc_imx_data *imx_data) { @@ -318,6 +320,7 @@ static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned event) int ret = 0; switch (event) { +#ifdef CONFIG_POWER_SUPPLY case CI_HDRC_CONTROLLER_VBUS_EVENT: if (data->usbmisc_data && ci->vbus_active) { if (data->imx_usb_charger_detection) { @@ -338,6 +341,7 @@ static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned event) return ret; imx_usbmisc_charger_secondary_detection(data->usbmisc_data); break; +#endif case CI_HDRC_IMX_HSIC_ACTIVE_EVENT: if (!IS_ERR(data->pinctrl) && !IS_ERR(data->pinctrl_hsic_active)) { @@ -377,6 +381,7 @@ static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned event) return ret; } +#ifdef CONFIG_POWER_SUPPLY static int imx_usb_charger_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -440,6 +445,7 @@ static int imx_usb_register_charger(struct usb_charger *charger, return 0; } +#endif static int ci_hdrc_imx_probe(struct platform_device *pdev) { @@ -566,6 +572,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) if (of_find_property(np, "imx-usb-charger-detection", NULL) && data->usbmisc_data) { +#ifdef CONFIG_POWER_SUPPLY data->imx_usb_charger_detection = true; data->charger.dev = &pdev->dev; data->usbmisc_data->charger = &data->charger; @@ -576,6 +583,10 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) if (!ret) dev_dbg(&pdev->dev, "USB Charger is created\n"); +#else + dev_err(&pdev->dev, + "USB Charger requires CONFIG_POWER_SUPPLY\n"); +#endif } ret = imx_usbmisc_init(data->usbmisc_data); diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index e62fc732e86c..5f133fb2ca6d 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -487,6 +487,7 @@ static int usbmisc_vf610_init(struct imx_usbmisc_data *data) /***************************************************************************/ /* imx usb charger detecton */ /***************************************************************************/ +#ifdef CONFIG_POWER_SUPPLY static void usb_charger_is_present(struct usb_charger *charger, bool present) { if (present) @@ -640,6 +641,7 @@ static int usbmisc_imx6sx_power_lost_check(struct imx_usbmisc_data *data) else return 0; } +#endif static int usbmisc_imx7d_set_wakeup (struct imx_usbmisc_data *data, bool enabled) @@ -692,6 +694,7 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data) return 0; } +#ifdef CONFIG_POWER_SUPPLY static int usbmisc_imx7d_power_lost_check(struct imx_usbmisc_data *data) { struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); @@ -867,6 +870,7 @@ int imx7d_charger_secondary_detection(struct imx_usbmisc_data *data) return 0; } +#endif static int usbmisc_term_select_override(struct imx_usbmisc_data *data, bool enable, int val) @@ -915,8 +919,10 @@ static const struct usbmisc_ops imx53_usbmisc_ops = { static const struct usbmisc_ops imx6q_usbmisc_ops = { .set_wakeup = usbmisc_imx6q_set_wakeup, .init = usbmisc_imx6q_init, +#ifdef CONFIG_POWER_SUPPLY .charger_primary_detection = imx6_charger_primary_detection, .charger_secondary_detection = imx6_charger_secondary_detection, +#endif .hsic_set_connect = usbmisc_imx6_hsic_set_connect, .hsic_set_clk = usbmisc_imx6_hsic_set_clk, }; @@ -928,9 +934,11 @@ static const struct usbmisc_ops vf610_usbmisc_ops = { static const struct usbmisc_ops imx6sx_usbmisc_ops = { .set_wakeup = usbmisc_imx6q_set_wakeup, .init = usbmisc_imx6sx_init, +#ifdef CONFIG_POWER_SUPPLY .charger_primary_detection = imx6_charger_primary_detection, .charger_secondary_detection = imx6_charger_secondary_detection, .power_lost_check = usbmisc_imx6sx_power_lost_check, +#endif .hsic_set_connect = usbmisc_imx6_hsic_set_connect, .hsic_set_clk = usbmisc_imx6_hsic_set_clk, }; @@ -938,9 +946,11 @@ static const struct usbmisc_ops imx6sx_usbmisc_ops = { static const struct usbmisc_ops imx7d_usbmisc_ops = { .init = usbmisc_imx7d_init, .set_wakeup = usbmisc_imx7d_set_wakeup, +#ifdef CONFIG_POWER_SUPPLY .power_lost_check = usbmisc_imx7d_power_lost_check, .charger_primary_detection = imx7d_charger_primary_detection, .charger_secondary_detection = imx7d_charger_secondary_detection, +#endif .term_select_override = usbmisc_term_select_override, }; @@ -986,6 +996,7 @@ int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled) } EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup); +#ifdef CONFIG_POWER_SUPPLY int imx_usbmisc_charger_detection(struct imx_usbmisc_data *data, bool connect) { struct imx_usbmisc *usbmisc; @@ -1037,6 +1048,7 @@ int imx_usbmisc_charger_secondary_detection(struct imx_usbmisc_data *data) return usbmisc->ops->charger_secondary_detection(data); } EXPORT_SYMBOL_GPL(imx_usbmisc_charger_secondary_detection); +#endif int imx_usbmisc_power_lost_check(struct imx_usbmisc_data *data) { diff --git a/drivers/video/fbdev/mxc/Makefile b/drivers/video/fbdev/mxc/Makefile index dafc050f6b31..922f98aed665 100644 --- a/drivers/video/fbdev/mxc/Makefile +++ b/drivers/video/fbdev/mxc/Makefile @@ -1,3 +1,4 @@ +obj-y += mxc_dispdrv.o obj-$(CONFIG_FB_MXC_MIPI_DSI) += mipi_dsi.o obj-$(CONFIG_FB_MXC_MIPI_DSI_SAMSUNG) += mipi_dsi_samsung.o obj-$(CONFIG_FB_MXC_TRULY_WVGA_SYNC_PANEL) += mxcfb_hx8369_wvga.o @@ -6,7 +7,7 @@ obj-$(CONFIG_FB_MXC_TRULY_PANEL_TFT3P5581E) += mxcfb_hx8363_wvga.o obj-$(CONFIG_FB_MXC_LDB) += ldb.o obj-$(CONFIG_FB_MXC_HDMI) += mxc_hdmi.o obj-$(CONFIG_FB_MXC_EDID) += mxc_edid.o -obj-$(CONFIG_FB_MXC_SYNC_PANEL) += mxc_dispdrv.o mxc_lcdif.o mxc_ipuv3_fb.o +obj-$(CONFIG_FB_MXC_SYNC_PANEL) += mxc_lcdif.o mxc_ipuv3_fb.o obj-$(CONFIG_FB_MXC_EINK_PANEL) += mxc_epdc_fb.o obj-$(CONFIG_FB_MXC_EINK_V2_PANEL) += mxc_epdc_v2_fb.o obj-$(CONFIG_FB_MXS_SII902X) += mxsfb_sii902x.o diff --git a/drivers/video/fbdev/mxsfb.c b/drivers/video/fbdev/mxsfb.c index deec998cd394..4e0fa2a1cc6d 100644 --- a/drivers/video/fbdev/mxsfb.c +++ b/drivers/video/fbdev/mxsfb.c @@ -1192,7 +1192,16 @@ static int mxsfb_init_fbinfo_dt(struct mxsfb_info *host) if (!(vm.flags & DISPLAY_FLAGS_DE_HIGH)) fb_vm.sync |= FB_SYNC_OE_LOW_ACT; - if (vm.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) + + /* + * The PIXDATA flags of the display_flags enum are controller + * centric, e.g. NEGEDGE means drive data on negative edge. + * However, the drivers flag is display centric: Sample the + * data on negative (falling) edge. Therefore, check for the + * POSEDGE flag: + * drive on positive edge => sample on negative edge + */ + if (vm.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE) fb_vm.sync |= FB_SYNC_CLK_LAT_FALL; fb_add_videomode(&fb_vm, &fb_info->modelist); } diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig index 0037104d66ac..d2ca63c03524 100644 --- a/drivers/video/logo/Kconfig +++ b/drivers/video/logo/Kconfig @@ -82,4 +82,8 @@ config LOGO_M32R_CLUT224 depends on M32R default y +config LOGO_CUSTOM_CLUT224 + bool "Custom 224-color Linux logo" + default n + endif # LOGO diff --git a/drivers/video/logo/Makefile b/drivers/video/logo/Makefile index 3b437813584c..45d4b5346d07 100644 --- a/drivers/video/logo/Makefile +++ b/drivers/video/logo/Makefile @@ -18,6 +18,8 @@ obj-$(CONFIG_LOGO_M32R_CLUT224) += logo_m32r_clut224.o obj-$(CONFIG_SPU_BASE) += logo_spe_clut224.o +obj-$(CONFIG_LOGO_CUSTOM_CLUT224) += logo_custom_clut224.o + # How to generate logo's # Use logo-cfiles to retrieve list of .c files to be built diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c index 10fbfd8ab963..bef02e84a076 100644 --- a/drivers/video/logo/logo.c +++ b/drivers/video/logo/logo.c @@ -111,6 +111,10 @@ const struct linux_logo * __init_refok fb_find_logo(int depth) /* M32R Linux logo */ logo = &logo_m32r_clut224; #endif +#ifdef CONFIG_LOGO_CUSTOM_CLUT224 + /* Custom Linux logo */ + logo = &logo_custom_clut224; +#endif } return logo; } diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 371e560d13cf..27fa57322550 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -115,10 +115,122 @@ #define __maybe_unused __attribute__((unused)) #define __always_unused __attribute__((unused)) -#define __gcc_header(x) #x -#define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h) -#define gcc_header(x) _gcc_header(x) -#include gcc_header(__GNUC__) +/* gcc version specific checks */ + +#if GCC_VERSION < 30200 +# error Sorry, your compiler is too old - please upgrade it. +#endif + +#if GCC_VERSION < 30300 +# define __used __attribute__((__unused__)) +#else +# define __used __attribute__((__used__)) +#endif + +#ifdef CONFIG_GCOV_KERNEL +# if GCC_VERSION < 30400 +# error "GCOV profiling support for gcc versions below 3.4 not included" +# endif /* __GNUC_MINOR__ */ +#endif /* CONFIG_GCOV_KERNEL */ + +#if GCC_VERSION >= 30400 +#define __must_check __attribute__((warn_unused_result)) +#endif + +#if GCC_VERSION >= 40000 + +/* GCC 4.1.[01] miscompiles __weak */ +#ifdef __KERNEL__ +# if GCC_VERSION >= 40100 && GCC_VERSION <= 40101 +# error Your version of gcc miscompiles the __weak directive +# endif +#endif + +#define __used __attribute__((__used__)) +#define __compiler_offsetof(a, b) \ + __builtin_offsetof(a, b) + +#if GCC_VERSION >= 40100 && GCC_VERSION < 40600 +# define __compiletime_object_size(obj) __builtin_object_size(obj, 0) +#endif + +#if GCC_VERSION >= 40300 +/* Mark functions as cold. gcc will assume any path leading to a call + * to them will be unlikely. This means a lot of manual unlikely()s + * are unnecessary now for any paths leading to the usual suspects + * like BUG(), printk(), panic() etc. [but let's keep them for now for + * older compilers] + * + * Early snapshots of gcc 4.3 don't support this and we can't detect this + * in the preprocessor, but we can live with this because they're unreleased. + * Maketime probing would be overkill here. + * + * gcc also has a __attribute__((__hot__)) to move hot functions into + * a special section, but I don't see any sense in this right now in + * the kernel context + */ +#define __cold __attribute__((__cold__)) + +#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) + +#ifndef __CHECKER__ +# define __compiletime_warning(message) __attribute__((warning(message))) +# define __compiletime_error(message) __attribute__((error(message))) +#endif /* __CHECKER__ */ +#endif /* GCC_VERSION >= 40300 */ + +#if GCC_VERSION >= 40500 +/* + * Mark a position in code as unreachable. This can be used to + * suppress control flow warnings after asm blocks that transfer + * control elsewhere. + * + * Early snapshots of gcc 4.5 don't support this and we can't detect + * this in the preprocessor, but we can live with this because they're + * unreleased. Really, we need to have autoconf for the kernel. + */ +#define unreachable() __builtin_unreachable() + +/* Mark a function definition as prohibited from being cloned. */ +#define __noclone __attribute__((__noclone__, __optimize__("no-tracer"))) + +#endif /* GCC_VERSION >= 40500 */ + +#if GCC_VERSION >= 40600 +/* + * Tell the optimizer that something else uses this function or variable. + */ +#define __visible __attribute__((externally_visible)) +#endif + +/* + * GCC 'asm goto' miscompiles certain code sequences: + * + * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 + * + * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. + * + * (asm goto is automatically volatile - the naming reflects this.) + */ +#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) + +#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP +#if GCC_VERSION >= 40400 +#define __HAVE_BUILTIN_BSWAP32__ +#define __HAVE_BUILTIN_BSWAP64__ +#endif +#if GCC_VERSION >= 40800 || (defined(__powerpc__) && GCC_VERSION >= 40600) +#define __HAVE_BUILTIN_BSWAP16__ +#endif +#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ + +#if GCC_VERSION >= 50000 +#define KASAN_ABI_VERSION 4 +#elif GCC_VERSION >= 40902 +#define KASAN_ABI_VERSION 3 +#endif + +#endif /* gcc version >= 40000 specific checks */ #if !defined(__noclone) #define __noclone /* not needed */ diff --git a/include/linux/compiler-gcc3.h b/include/linux/compiler-gcc3.h deleted file mode 100644 index 7d89febe4d79..000000000000 --- a/include/linux/compiler-gcc3.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef __LINUX_COMPILER_H -#error "Please don't include <linux/compiler-gcc3.h> directly, include <linux/compiler.h> instead." -#endif - -#if GCC_VERSION < 30200 -# error Sorry, your compiler is too old - please upgrade it. -#endif - -#if GCC_VERSION >= 30300 -# define __used __attribute__((__used__)) -#else -# define __used __attribute__((__unused__)) -#endif - -#if GCC_VERSION >= 30400 -#define __must_check __attribute__((warn_unused_result)) -#endif - -#ifdef CONFIG_GCOV_KERNEL -# if GCC_VERSION < 30400 -# error "GCOV profiling support for gcc versions below 3.4 not included" -# endif /* __GNUC_MINOR__ */ -#endif /* CONFIG_GCOV_KERNEL */ diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h deleted file mode 100644 index 769e19864632..000000000000 --- a/include/linux/compiler-gcc4.h +++ /dev/null @@ -1,91 +0,0 @@ -#ifndef __LINUX_COMPILER_H -#error "Please don't include <linux/compiler-gcc4.h> directly, include <linux/compiler.h> instead." -#endif - -/* GCC 4.1.[01] miscompiles __weak */ -#ifdef __KERNEL__ -# if GCC_VERSION >= 40100 && GCC_VERSION <= 40101 -# error Your version of gcc miscompiles the __weak directive -# endif -#endif - -#define __used __attribute__((__used__)) -#define __must_check __attribute__((warn_unused_result)) -#define __compiler_offsetof(a,b) __builtin_offsetof(a,b) - -#if GCC_VERSION >= 40100 && GCC_VERSION < 40600 -# define __compiletime_object_size(obj) __builtin_object_size(obj, 0) -#endif - -#if GCC_VERSION >= 40300 -/* Mark functions as cold. gcc will assume any path leading to a call - to them will be unlikely. This means a lot of manual unlikely()s - are unnecessary now for any paths leading to the usual suspects - like BUG(), printk(), panic() etc. [but let's keep them for now for - older compilers] - - Early snapshots of gcc 4.3 don't support this and we can't detect this - in the preprocessor, but we can live with this because they're unreleased. - Maketime probing would be overkill here. - - gcc also has a __attribute__((__hot__)) to move hot functions into - a special section, but I don't see any sense in this right now in - the kernel context */ -#define __cold __attribute__((__cold__)) - -#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) - -#ifndef __CHECKER__ -# define __compiletime_warning(message) __attribute__((warning(message))) -# define __compiletime_error(message) __attribute__((error(message))) -#endif /* __CHECKER__ */ -#endif /* GCC_VERSION >= 40300 */ - -#if GCC_VERSION >= 40500 -/* - * Mark a position in code as unreachable. This can be used to - * suppress control flow warnings after asm blocks that transfer - * control elsewhere. - * - * Early snapshots of gcc 4.5 don't support this and we can't detect - * this in the preprocessor, but we can live with this because they're - * unreleased. Really, we need to have autoconf for the kernel. - */ -#define unreachable() __builtin_unreachable() - -/* Mark a function definition as prohibited from being cloned. */ -#define __noclone __attribute__((__noclone__)) - -#endif /* GCC_VERSION >= 40500 */ - -#if GCC_VERSION >= 40600 -/* - * Tell the optimizer that something else uses this function or variable. - */ -#define __visible __attribute__((externally_visible)) -#endif - -/* - * GCC 'asm goto' miscompiles certain code sequences: - * - * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 - * - * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. - * - * (asm goto is automatically volatile - the naming reflects this.) - */ -#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) - -#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP -#if GCC_VERSION >= 40400 -#define __HAVE_BUILTIN_BSWAP32__ -#define __HAVE_BUILTIN_BSWAP64__ -#endif -#if GCC_VERSION >= 40800 || (defined(__powerpc__) && GCC_VERSION >= 40600) -#define __HAVE_BUILTIN_BSWAP16__ -#endif -#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ - -#if GCC_VERSION >= 40902 -#define KASAN_ABI_VERSION 3 -#endif diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h deleted file mode 100644 index efee493714eb..000000000000 --- a/include/linux/compiler-gcc5.h +++ /dev/null @@ -1,67 +0,0 @@ -#ifndef __LINUX_COMPILER_H -#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead." -#endif - -#define __used __attribute__((__used__)) -#define __must_check __attribute__((warn_unused_result)) -#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) - -/* Mark functions as cold. gcc will assume any path leading to a call - to them will be unlikely. This means a lot of manual unlikely()s - are unnecessary now for any paths leading to the usual suspects - like BUG(), printk(), panic() etc. [but let's keep them for now for - older compilers] - - Early snapshots of gcc 4.3 don't support this and we can't detect this - in the preprocessor, but we can live with this because they're unreleased. - Maketime probing would be overkill here. - - gcc also has a __attribute__((__hot__)) to move hot functions into - a special section, but I don't see any sense in this right now in - the kernel context */ -#define __cold __attribute__((__cold__)) - -#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) - -#ifndef __CHECKER__ -# define __compiletime_warning(message) __attribute__((warning(message))) -# define __compiletime_error(message) __attribute__((error(message))) -#endif /* __CHECKER__ */ - -/* - * Mark a position in code as unreachable. This can be used to - * suppress control flow warnings after asm blocks that transfer - * control elsewhere. - * - * Early snapshots of gcc 4.5 don't support this and we can't detect - * this in the preprocessor, but we can live with this because they're - * unreleased. Really, we need to have autoconf for the kernel. - */ -#define unreachable() __builtin_unreachable() - -/* Mark a function definition as prohibited from being cloned. */ -#define __noclone __attribute__((__noclone__)) - -/* - * Tell the optimizer that something else uses this function or variable. - */ -#define __visible __attribute__((externally_visible)) - -/* - * GCC 'asm goto' miscompiles certain code sequences: - * - * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 - * - * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. - * - * (asm goto is automatically volatile - the naming reflects this.) - */ -#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) - -#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP -#define __HAVE_BUILTIN_BSWAP32__ -#define __HAVE_BUILTIN_BSWAP64__ -#define __HAVE_BUILTIN_BSWAP16__ -#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ - -#define KASAN_ABI_VERSION 4 diff --git a/include/linux/input/fusion_F0710A.h b/include/linux/input/fusion_F0710A.h new file mode 100644 index 000000000000..7d152cbdd06e --- /dev/null +++ b/include/linux/input/fusion_F0710A.h @@ -0,0 +1,20 @@ +/* linux/input/fusion_F0710A.h + * + * Platform data for Fusion F0710A driver + * + * Copyright (c) 2013 Toradex AG (stefan.agner@toradex.ch) + * + * For licencing details see kernel-base/COPYING + */ + +#ifndef __LINUX_I2C_FUSION_F0710A_H +#define __LINUX_I2C_FUSION_F0710A_H + +/* Board specific touch screen initial values */ +struct fusion_f0710a_init_data { + int (*pinmux_fusion_pins)(void); + int gpio_int; + int gpio_reset; +}; + +#endif /* __LINUX_I2C_FUSION_F0710A_H */ diff --git a/include/linux/linux_logo.h b/include/linux/linux_logo.h index ca5bd91d12e1..2be299513819 100644 --- a/include/linux/linux_logo.h +++ b/include/linux/linux_logo.h @@ -47,6 +47,7 @@ extern const struct linux_logo logo_superh_vga16; extern const struct linux_logo logo_superh_clut224; extern const struct linux_logo logo_m32r_clut224; extern const struct linux_logo logo_spe_clut224; +extern const struct linux_logo logo_custom_clut224; extern const struct linux_logo *fb_find_logo(int depth); #ifdef CONFIG_FB_LOGO_EXTRA diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h index c72d5344f3b3..cadc6543909d 100644 --- a/include/linux/mfd/rn5t618.h +++ b/include/linux/mfd/rn5t618.h @@ -20,6 +20,7 @@ #define RN5T618_OTPVER 0x01 #define RN5T618_IODAC 0x02 #define RN5T618_VINDAC 0x03 +#define RN5T618_OUT32KEN 0x05 #define RN5T618_CPUCNT 0x06 #define RN5T618_PSWR 0x07 #define RN5T618_PONHIS 0x09 @@ -38,6 +39,7 @@ #define RN5T618_DC1_SLOT 0x16 #define RN5T618_DC2_SLOT 0x17 #define RN5T618_DC3_SLOT 0x18 +#define RN5T618_DC4_SLOT 0x19 #define RN5T618_LDO1_SLOT 0x1b #define RN5T618_LDO2_SLOT 0x1c #define RN5T618_LDO3_SLOT 0x1d @@ -54,12 +56,16 @@ #define RN5T618_DC2CTL2 0x2f #define RN5T618_DC3CTL 0x30 #define RN5T618_DC3CTL2 0x31 +#define RN5T618_DC4CTL 0x32 +#define RN5T618_DC4CTL2 0x33 #define RN5T618_DC1DAC 0x36 #define RN5T618_DC2DAC 0x37 #define RN5T618_DC3DAC 0x38 +#define RN5T618_DC4DAC 0x39 #define RN5T618_DC1DAC_SLP 0x3b #define RN5T618_DC2DAC_SLP 0x3c #define RN5T618_DC3DAC_SLP 0x3d +#define RN5T618_DC4DAC_SLP 0x3e #define RN5T618_DCIREN 0x40 #define RN5T618_DCIRQ 0x41 #define RN5T618_DCIRMON 0x42 @@ -211,6 +217,7 @@ enum { RN5T618_DCDC1, RN5T618_DCDC2, RN5T618_DCDC3, + RN5T618_DCDC4, RN5T618_LDO1, RN5T618_LDO2, RN5T618_LDO3, @@ -221,8 +228,14 @@ enum { RN5T618_REG_NUM, }; +enum { + RN5T567 = 0, + RN5T618, +}; + struct rn5t618 { struct regmap *regmap; + long variant; }; #endif /* __LINUX_MFD_RN5T618_H */ diff --git a/include/linux/spi/ad7879.h b/include/linux/platform_data/ad7879.h index 58368be0b4c0..69e2e1fd2bc8 100644 --- a/include/linux/spi/ad7879.h +++ b/include/linux/platform_data/ad7879.h @@ -1,4 +1,4 @@ -/* linux/spi/ad7879.h */ +/* linux/platform_data/ad7879.h */ /* Touchscreen characteristics vary between boards and models. The * platform_data for the device's "struct device" holds this information. diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 3a29c0ac5d8a..0a423e437711 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1463,8 +1463,10 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, /* read chip information */ ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, ®); - if (ret) + if (ret) { + ret = -EPROBE_DEFER; goto disable_clk; + } if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) != SGTL5000_PARTID_PART_ID) { diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c index b99e0b5e00e9..de5691b3cc10 100644 --- a/sound/soc/fsl/imx-sgtl5000.c +++ b/sound/soc/fsl/imx-sgtl5000.c @@ -1,5 +1,5 @@ /* - * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012, 2014 Freescale Semiconductor, Inc. * Copyright 2012 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public @@ -55,13 +55,9 @@ static const struct snd_soc_dapm_widget imx_sgtl5000_dapm_widgets[] = { SND_SOC_DAPM_SPK("Ext Spk", NULL), }; -static int imx_sgtl5000_probe(struct platform_device *pdev) +static int imx_sgtl5000_audmux_config(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct device_node *ssi_np, *codec_np; - struct platform_device *ssi_pdev; - struct i2c_client *codec_dev; - struct imx_sgtl5000_data *data = NULL; int int_port, ext_port; int ret; @@ -101,16 +97,33 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) return ret; } - ssi_np = of_parse_phandle(pdev->dev.of_node, "ssi-controller", 0); + return 0; +} + +static int imx_sgtl5000_probe(struct platform_device *pdev) +{ + struct device_node *cpu_np, *codec_np; + struct platform_device *cpu_pdev; + struct i2c_client *codec_dev; + struct imx_sgtl5000_data *data = NULL; + int ret; + + cpu_np = of_parse_phandle(pdev->dev.of_node, "cpu-dai", 0); codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0); - if (!ssi_np || !codec_np) { + if (!cpu_np || !codec_np) { dev_err(&pdev->dev, "phandle missing or invalid\n"); ret = -EINVAL; goto fail; } - ssi_pdev = of_find_device_by_node(ssi_np); - if (!ssi_pdev) { + if (strstr(cpu_np->name, "ssi")) { + ret = imx_sgtl5000_audmux_config(pdev); + if (ret) + goto fail; + } + + cpu_pdev = of_find_device_by_node(cpu_np); + if (!cpu_pdev) { dev_err(&pdev->dev, "failed to find SSI platform device\n"); ret = -EPROBE_DEFER; goto fail; @@ -139,8 +152,8 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) data->dai.stream_name = "HiFi"; data->dai.codec_dai_name = "sgtl5000"; data->dai.codec_of_node = codec_np; - data->dai.cpu_of_node = ssi_np; - data->dai.platform_of_node = ssi_np; + data->dai.cpu_of_node = cpu_np; + data->dai.platform_of_node = cpu_np; data->dai.init = &imx_sgtl5000_dai_init; data->dai.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM; @@ -167,7 +180,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) goto fail; } - of_node_put(ssi_np); + of_node_put(cpu_np); of_node_put(codec_np); return 0; @@ -175,8 +188,10 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) fail: if (data && !IS_ERR(data->codec_clk)) clk_put(data->codec_clk); - of_node_put(ssi_np); - of_node_put(codec_np); + if (cpu_np) + of_node_put(cpu_np); + if (codec_np) + of_node_put(codec_np); return ret; } |