summaryrefslogtreecommitdiff
path: root/sound
diff options
context:
space:
mode:
authorCristian Ciocaltea <cristian.ciocaltea@collabora.com>2023-05-30 21:11:39 +0300
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2023-07-27 08:37:14 +0200
commitb756eb5eb9b0a7db5dd3d97c0136e64dd9508614 (patch)
tree2b424d537dba13ccce3e47454d4c68d749b56e72 /sound
parentd1c1ca27cac0090feb2a97cc6141e4ac9f6766ff (diff)
ASoC: es8316: Do not set rate constraints for unsupported MCLKs
[ Upstream commit 60413129ee2b38a80347489270af7f6e1c1de4d0 ] When using the codec through the generic audio graph card, there are at least two calls of es8316_set_dai_sysclk(), with the effect of limiting the allowed sample rates according to the MCLK/LRCK ratios supported by the codec: 1. During audio card setup, to set the initial MCLK - see asoc_simple_init_dai(). 2. Before opening a stream, to update MCLK, according to the stream sample rate and the multiplication factor - see asoc_simple_hw_params(). In some cases the initial MCLK might be set to a frequency that doesn't match any of the supported ratios, e.g. 12287999 instead of 12288000, which is only 1 Hz below the supported clock, as that is what the hardware reports. This creates an empty list of rate constraints, which is further passed to snd_pcm_hw_constraint_list() via es8316_pcm_startup(), and causes the following error on the very first access of the sound card: $ speaker-test -D hw:Analog,0 -F S16_LE -c 2 -t wav Broken configuration for playback: no configurations available: Invalid argument Setting of hwparams failed: Invalid argument Note that all subsequent retries succeed thanks to the updated MCLK set at point 2 above, which uses a computed frequency value instead of a reading from the hardware registers. Normally this would have mitigated the issue, but es8316_pcm_startup() executes before the 2nd call to es8316_set_dai_sysclk(), hence it cannot make use of the updated constraints. Since es8316_pcm_hw_params() performs anyway a final validation of MCLK against the stream sample rate and the supported MCLK/LRCK ratios, fix the issue by ensuring that sysclk_constraints list is only set when at least one supported sample rate is autodetected by the codec. Fixes: b8b88b70875a ("ASoC: add es8316 codec driver") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20230530181140.483936-3-cristian.ciocaltea@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Diffstat (limited to 'sound')
-rw-r--r--sound/soc/codecs/es8316.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c
index 9be667e76e55..131f41cccbe6 100644
--- a/sound/soc/codecs/es8316.c
+++ b/sound/soc/codecs/es8316.c
@@ -369,13 +369,11 @@ static int es8316_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int count = 0;
es8316->sysclk = freq;
+ es8316->sysclk_constraints.list = NULL;
+ es8316->sysclk_constraints.count = 0;
- if (freq == 0) {
- es8316->sysclk_constraints.list = NULL;
- es8316->sysclk_constraints.count = 0;
-
+ if (freq == 0)
return 0;
- }
ret = clk_set_rate(es8316->mclk, freq);
if (ret)
@@ -391,8 +389,10 @@ static int es8316_set_dai_sysclk(struct snd_soc_dai *codec_dai,
es8316->allowed_rates[count++] = freq / ratio;
}
- es8316->sysclk_constraints.list = es8316->allowed_rates;
- es8316->sysclk_constraints.count = count;
+ if (count) {
+ es8316->sysclk_constraints.list = es8316->allowed_rates;
+ es8316->sysclk_constraints.count = count;
+ }
return 0;
}