Merge tag 'v4.9.220' into 4.9-2.3.x-imx

This is the 4.9.220 stable release

Conflicts:
	arch/arm/Kconfig.debug
	arch/arm/boot/dts/imx7s.dtsi
	arch/arm/mach-imx/common.h
	arch/arm/mach-imx/cpuidle-imx6q.c
	arch/arm/mach-imx/cpuidle-imx6sx.c
	arch/arm/mach-imx/suspend-imx6.S
	block/blk-core.c
	drivers/crypto/caam/caamalg.c
	drivers/crypto/mxs-dcp.c
	drivers/dma/imx-sdma.c
	drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
	drivers/input/keyboard/imx_keypad.c
	drivers/input/keyboard/snvs_pwrkey.c
	drivers/mmc/host/sdhci.c
	drivers/net/can/flexcan.c
	drivers/net/ethernet/freescale/fec_main.c
	drivers/net/phy/phy_device.c
	drivers/net/wireless/ath/ath10k/pci.c
	drivers/tty/serial/imx.c
	drivers/usb/dwc3/gadget.c
	drivers/usb/host/xhci.c
	include/linux/blkdev.h
	include/linux/cpu.h
	include/linux/platform_data/dma-imx-sdma.h
	kernel/cpu.c
	net/wireless/util.c
	sound/soc/fsl/Kconfig
	sound/soc/fsl/fsl_esai.c
	sound/soc/fsl/fsl_sai.c
	sound/soc/fsl/imx-sgtl5000.c

1 files changed, 18 insertions, 4 deletions

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index bbfe7be214e1..af3bc06b4aed 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2384,7 +2384,8 @@ int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
 		   status->freq, status->band, status->signal,
 		   status->rate_idx);
 
-	ieee80211_rx(ar->hw, skb);
+	ieee80211_rx_ni(ar->hw, skb);
+
 	return 0;
 }
 
@@ -3102,18 +3103,31 @@ void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct wmi_vdev_start_ev_arg arg = {};
 	int ret;
+	u32 status;
 
 	ath10k_dbg(ar, ATH10K_DBG_WMI, "WMI_VDEV_START_RESP_EVENTID\n");
 
+	ar->last_wmi_vdev_start_status = 0;
+
 	ret = ath10k_wmi_pull_vdev_start(ar, skb, &arg);
 	if (ret) {
 		ath10k_warn(ar, "failed to parse vdev start event: %d\n", ret);
-		return;
+		ar->last_wmi_vdev_start_status = ret;
+		goto out;
 	}
 
-	if (WARN_ON(__le32_to_cpu(arg.status)))
-		return;
+	status = __le32_to_cpu(arg.status);
+	if (WARN_ON_ONCE(status)) {
+		ath10k_warn(ar, "vdev-start-response reports status error: %d (%s)\n",
+			    status, (status == WMI_VDEV_START_CHAN_INVALID) ?
+			    "chan-invalid" : "unknown");
+		/* Setup is done one way or another though, so we should still
+		 * do the completion, so don't return here.
+		 */
+		ar->last_wmi_vdev_start_status = -EINVAL;
+	}
 
+out:
 	complete(&ar->vdev_setup_done);
 }