summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorArtem Bityutskiy <Artem.Bityutskiy@nokia.com>2011-01-29 18:27:13 +0200
committerArtem Bityutskiy <Artem.Bityutskiy@nokia.com>2011-01-29 18:27:13 +0200
commit3a0592b1dd69cfc403ee7514c47b9d57d8bbd6d7 (patch)
treeb98f0e7cc2dc25cdffcd52dee0f070ab033b5f05
parent1bae4ce27c9c90344f23c65ea6966c50ffeae2f5 (diff)
Revert "UBI: use mtd->writebufsize to set minimal I/O unit size"
This reverts commit a121f643993474548fe98144514c50dd4f3dbe76. Unfortunately, this commit breaks UBIFS backward compatibility and makes new UBIFS refuse older UBIFS-formatted media: UBIFS error: validate_sb: min. I/O unit mismatch: 8 in superblock, 64 real Thus, we have to revert this patch and work on a better solution. Reported-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-rw-r--r--drivers/mtd/ubi/build.c28
1 files changed, 1 insertions, 27 deletions
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index f49e49dc5928..5ebe280225d6 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -672,33 +672,7 @@ static int io_init(struct ubi_device *ubi)
ubi->nor_flash = 1;
}
- /*
- * Set UBI min. I/O size (@ubi->min_io_size). We use @mtd->writebufsize
- * for these purposes, not @mtd->writesize. At the moment this does not
- * matter for NAND, because currently @mtd->writebufsize is equivalent to
- * @mtd->writesize for all NANDs. However, some CFI NOR flashes may
- * have @mtd->writebufsize which is multiple of @mtd->writesize.
- *
- * The reason we use @mtd->writebufsize for @ubi->min_io_size is that
- * UBI and UBIFS recovery algorithms rely on the fact that if there was
- * an unclean power cut, then we can find offset of the last corrupted
- * node, align the offset to @ubi->min_io_size, read the rest of the
- * eraseblock starting from this offset, and check whether there are
- * only 0xFF bytes. If yes, then we are probably dealing with a
- * corruption caused by a power cut, if not, then this is probably some
- * severe corruption.
- *
- * Thus, we have to use the maximum write unit size of the flash, which
- * is @mtd->writebufsize, because @mtd->writesize is the minimum write
- * size, not the maximum.
- */
- if (ubi->mtd->type == MTD_NANDFLASH)
- ubi_assert(ubi->mtd->writebufsize == ubi->mtd->writesize);
- else if (ubi->mtd->type == MTD_NORFLASH)
- ubi_assert(ubi->mtd->writebufsize % ubi->mtd->writesize == 0);
-
- ubi->min_io_size = ubi->mtd->writebufsize;
-
+ ubi->min_io_size = ubi->mtd->writesize;
ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft;
/*