diff options
author | Philippe Schenker <philippe.schenker@toradex.com> | 2020-03-25 18:34:25 +0100 |
---|---|---|
committer | Marcel Ziswiler <marcel.ziswiler@toradex.com> | 2020-03-30 10:37:37 +0000 |
commit | 39645d160aa8a72db6ee940c48e65c6cb534aa5f (patch) | |
tree | 005f4ba239388a059bde8239b4749d174759190b | |
parent | 35c8f650b782bde57aec34f23f2b1e90224fe687 (diff) |
ARM: dts: apalis-imx6qdl: use rgmii-id instead of rgmii
Until now a PHY-fixup in mach-imx set our rgmii timing correctly. For
the PHY KSZ9131 there is no PHY-fixup in mach-imx. To support this PHY
too, use rgmii-id.
For the now used KSZ9031 nothing will change, as rgmii-id is only
implemented and supported by the KSZ9131.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 1b68480b945e51ba879496d3f9ff5a5addd82007)
We have a PHY-fixup in our downstream Linux. However this patch makes
anyway sense to apply as it documents the rgmii mode properly and
won't brake anything.
Related-to: ELB-2581
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-apalis.dtsi | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index cebd78f2a34e..a2887613e361 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -297,7 +297,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy>; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |