/*
 * Copyright (c) 2015, Freescale Semiconductor, Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * o Redistributions of source code must retain the above copyright notice, this list
 *   of conditions and the following disclaimer.
 *
 * o Redistributions in binary form must reproduce the above copyright notice, this
 *   list of conditions and the following disclaimer in the documentation and/or
 *   other materials provided with the distribution.
 *
 * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
 *   contributors may be used to endorse or promote products derived from this
 *   software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

///////////////////////////////////////////////////////////////////////////////
//  Includes
///////////////////////////////////////////////////////////////////////////////
#include <stdint.h>
#include <stdbool.h>
#include "uart_imx.h"
#include "board.h"

///////////////////////////////////////////////////////////////////////////////
//  Consts
///////////////////////////////////////////////////////////////////////////////
const uint8_t bufferData1[] = "\n\r++++++++++++++++ UART Send/Receive Polling Example +++++++++++++++++\n\r";
const uint8_t bufferData2[] = "\n\rType characters from keyboard, the board will receive and then echo them to terminal screen\n\r";

static void UART_SendDataPolling(UART_Type *base, const uint8_t *txBuff, uint32_t txSize);
static void UART_ReceiveDataPolling(UART_Type *base, uint8_t *rxBuff, uint32_t rxSize);

int main(void)
{
    // Setup UART init structure.
    uart_init_config_t initConfig = {
        .baudRate   = 115200u,
        .wordLength = uartWordLength8Bits,
        .stopBitNum = uartStopBitNumOne,
        .parity     = uartParityDisable,
        .direction  = uartDirectionTxRx
    };
    uint8_t rxChar = 0;
    uint32_t byteCount = 0;

    /* Initialize board specified hardware. */
    hardware_init();

    // Get current module clock frequency.
    initConfig.clockRate  = get_uart_clock_freq(BOARD_DEBUG_UART_BASEADDR);

    /* Initialize UART baud rate, bit count, parity, stop bit and direction. */
    UART_Init(BOARD_DEBUG_UART_BASEADDR, &initConfig);

    /* Set UART build-in hardware FIFO Watermark. */
    UART_SetTxFifoWatermark(BOARD_DEBUG_UART_BASEADDR, 16);
    UART_SetRxFifoWatermark(BOARD_DEBUG_UART_BASEADDR, 1);

    /* Finally, enable the UART module */
    UART_Enable(BOARD_DEBUG_UART_BASEADDR);

    byteCount = sizeof(bufferData1);
    UART_SendDataPolling(BOARD_DEBUG_UART_BASEADDR, bufferData1, byteCount);

    byteCount = sizeof(bufferData2);
    UART_SendDataPolling(BOARD_DEBUG_UART_BASEADDR, bufferData2, byteCount);

    while (true)
    {
        /* Wait to receive input data */
        UART_ReceiveDataPolling(BOARD_DEBUG_UART_BASEADDR, &rxChar, 1u);

        /* Send any character that received */
        UART_SendDataPolling(BOARD_DEBUG_UART_BASEADDR, &rxChar, 1u);
    }
}

static void UART_SendDataPolling(UART_Type *base, const uint8_t *txBuff, uint32_t txSize)
{
    while (txSize--)
    {
        while (!UART_GetStatusFlag(base, uartStatusTxComplete));
        UART_Putchar(base, *txBuff++);
    }
}

static void UART_ReceiveDataPolling(UART_Type *base, uint8_t *rxBuff, uint32_t rxSize)
{
    while (rxSize--)
    {
        while (!UART_GetStatusFlag(base, uartStatusRxReady));
        *rxBuff = UART_Getchar(base);
        rxBuff++;

        if (UART_GetStatusFlag(base, uartStatusRxOverrun))
            UART_ClearStatusFlag(base, uartStatusRxOverrun);
    }
}

/*******************************************************************************
 * EOF
 ******************************************************************************/