From 56e86c626df3dbf74c1021210636a7c5d92a49ce Mon Sep 17 00:00:00 2001 From: Dominik Sliwa Date: Tue, 30 Oct 2018 16:31:29 +0100 Subject: move to cmake Signed-off-by: Dominik Sliwa --- drivers/src/fsl_uart_edma.c | 368 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 368 insertions(+) create mode 100644 drivers/src/fsl_uart_edma.c (limited to 'drivers/src/fsl_uart_edma.c') diff --git a/drivers/src/fsl_uart_edma.c b/drivers/src/fsl_uart_edma.c new file mode 100644 index 0000000..c51e493 --- /dev/null +++ b/drivers/src/fsl_uart_edma.c @@ -0,0 +1,368 @@ +/* + * Copyright (c) 2015, Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of the copyright holder nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "fsl_uart_edma.h" +#include "fsl_dmamux.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/* Array of UART handle. */ +#if (defined(UART5)) +#define UART_HANDLE_ARRAY_SIZE 6 +#else /* UART5 */ +#if (defined(UART4)) +#define UART_HANDLE_ARRAY_SIZE 5 +#else /* UART4 */ +#if (defined(UART3)) +#define UART_HANDLE_ARRAY_SIZE 4 +#else /* UART3 */ +#if (defined(UART2)) +#define UART_HANDLE_ARRAY_SIZE 3 +#else /* UART2 */ +#if (defined(UART1)) +#define UART_HANDLE_ARRAY_SIZE 2 +#else /* UART1 */ +#if (defined(UART0)) +#define UART_HANDLE_ARRAY_SIZE 1 +#else /* UART0 */ +#error No UART instance. +#endif /* UART 0 */ +#endif /* UART 1 */ +#endif /* UART 2 */ +#endif /* UART 3 */ +#endif /* UART 4 */ +#endif /* UART 5 */ + +/*base, uartPrivateHandle->handle); + + if (uartPrivateHandle->handle->callback) + { + uartPrivateHandle->handle->callback(uartPrivateHandle->base, uartPrivateHandle->handle, kStatus_UART_TxIdle, + uartPrivateHandle->handle->userData); + } + } +} + +static void UART_ReceiveEDMACallback(edma_handle_t *handle, void *param, bool transferDone, uint32_t tcds) +{ + assert(param); + + uart_edma_private_handle_t *uartPrivateHandle = (uart_edma_private_handle_t *)param; + + /* Avoid warning for unused parameters. */ + handle = handle; + tcds = tcds; + + if (transferDone) + { + /* Disable transfer. */ + UART_TransferAbortReceiveEDMA(uartPrivateHandle->base, uartPrivateHandle->handle); + + if (uartPrivateHandle->handle->callback) + { + uartPrivateHandle->handle->callback(uartPrivateHandle->base, uartPrivateHandle->handle, kStatus_UART_RxIdle, + uartPrivateHandle->handle->userData); + } + } +} + +void UART_TransferCreateHandleEDMA(UART_Type *base, + uart_edma_handle_t *handle, + uart_edma_transfer_callback_t callback, + void *userData, + edma_handle_t *txEdmaHandle, + edma_handle_t *rxEdmaHandle) +{ + assert(handle); + + uint32_t instance = UART_GetInstance(base); + + s_edmaPrivateHandle[instance].base = base; + s_edmaPrivateHandle[instance].handle = handle; + + memset(handle, 0, sizeof(*handle)); + + handle->rxState = kUART_RxIdle; + handle->txState = kUART_TxIdle; + + handle->rxEdmaHandle = rxEdmaHandle; + handle->txEdmaHandle = txEdmaHandle; + + handle->callback = callback; + handle->userData = userData; + +#if defined(FSL_FEATURE_UART_HAS_FIFO) && FSL_FEATURE_UART_HAS_FIFO + /* Note: + Take care of the RX FIFO, EDMA request only assert when received bytes + equal or more than RX water mark, there is potential issue if RX water + mark larger than 1. + For example, if RX FIFO water mark is 2, upper layer needs 5 bytes and + 5 bytes are received. the last byte will be saved in FIFO but not trigger + EDMA transfer because the water mark is 2. + */ + if (rxEdmaHandle) + { + base->RWFIFO = 1U; + } +#endif + + /* Configure TX. */ + if (txEdmaHandle) + { + EDMA_SetCallback(handle->txEdmaHandle, UART_SendEDMACallback, &s_edmaPrivateHandle[instance]); + } + + /* Configure RX. */ + if (rxEdmaHandle) + { + EDMA_SetCallback(handle->rxEdmaHandle, UART_ReceiveEDMACallback, &s_edmaPrivateHandle[instance]); + } +} + +status_t UART_SendEDMA(UART_Type *base, uart_edma_handle_t *handle, uart_transfer_t *xfer) +{ + assert(handle); + assert(handle->txEdmaHandle); + assert(xfer); + assert(xfer->data); + assert(xfer->dataSize); + + edma_transfer_config_t xferConfig; + status_t status; + + /* If previous TX not finished. */ + if (kUART_TxBusy == handle->txState) + { + status = kStatus_UART_TxBusy; + } + else + { + handle->txState = kUART_TxBusy; + handle->txDataSizeAll = xfer->dataSize; + + /* Prepare transfer. */ + EDMA_PrepareTransfer(&xferConfig, xfer->data, sizeof(uint8_t), (void *)UART_GetDataRegisterAddress(base), + sizeof(uint8_t), sizeof(uint8_t), xfer->dataSize, kEDMA_MemoryToPeripheral); + + /* Store the initially configured eDMA minor byte transfer count into the UART handle */ + handle->nbytes = sizeof(uint8_t); + + /* Submit transfer. */ + EDMA_SubmitTransfer(handle->txEdmaHandle, &xferConfig); + EDMA_StartTransfer(handle->txEdmaHandle); + + /* Enable UART TX EDMA. */ + UART_EnableTxDMA(base, true); + + status = kStatus_Success; + } + + return status; +} + +status_t UART_ReceiveEDMA(UART_Type *base, uart_edma_handle_t *handle, uart_transfer_t *xfer) +{ + assert(handle); + assert(handle->rxEdmaHandle); + assert(xfer); + assert(xfer->data); + assert(xfer->dataSize); + + edma_transfer_config_t xferConfig; + status_t status; + + /* If previous RX not finished. */ + if (kUART_RxBusy == handle->rxState) + { + status = kStatus_UART_RxBusy; + } + else + { + handle->rxState = kUART_RxBusy; + handle->rxDataSizeAll = xfer->dataSize; + + /* Prepare transfer. */ + EDMA_PrepareTransfer(&xferConfig, (void *)UART_GetDataRegisterAddress(base), sizeof(uint8_t), xfer->data, + sizeof(uint8_t), sizeof(uint8_t), xfer->dataSize, kEDMA_PeripheralToMemory); + + /* Store the initially configured eDMA minor byte transfer count into the UART handle */ + handle->nbytes = sizeof(uint8_t); + + /* Submit transfer. */ + EDMA_SubmitTransfer(handle->rxEdmaHandle, &xferConfig); + EDMA_StartTransfer(handle->rxEdmaHandle); + + /* Enable UART RX EDMA. */ + UART_EnableRxDMA(base, true); + + status = kStatus_Success; + } + + return status; +} + +void UART_TransferAbortSendEDMA(UART_Type *base, uart_edma_handle_t *handle) +{ + assert(handle); + assert(handle->txEdmaHandle); + + /* Disable UART TX EDMA. */ + UART_EnableTxDMA(base, false); + + /* Stop transfer. */ + EDMA_AbortTransfer(handle->txEdmaHandle); + + handle->txState = kUART_TxIdle; +} + +void UART_TransferAbortReceiveEDMA(UART_Type *base, uart_edma_handle_t *handle) +{ + assert(handle); + assert(handle->rxEdmaHandle); + + /* Disable UART RX EDMA. */ + UART_EnableRxDMA(base, false); + + /* Stop transfer. */ + EDMA_AbortTransfer(handle->rxEdmaHandle); + + handle->rxState = kUART_RxIdle; +} + +status_t UART_TransferGetReceiveCountEDMA(UART_Type *base, uart_edma_handle_t *handle, uint32_t *count) +{ + assert(handle); + assert(handle->rxEdmaHandle); + assert(count); + + if (kUART_RxIdle == handle->rxState) + { + return kStatus_NoTransferInProgress; + } + + *count = handle->rxDataSizeAll - + (uint32_t)handle->nbytes * + EDMA_GetRemainingMajorLoopCount(handle->rxEdmaHandle->base, handle->rxEdmaHandle->channel); + + return kStatus_Success; +} + +status_t UART_TransferGetSendCountEDMA(UART_Type *base, uart_edma_handle_t *handle, uint32_t *count) +{ + assert(handle); + assert(handle->txEdmaHandle); + assert(count); + + if (kUART_TxIdle == handle->txState) + { + return kStatus_NoTransferInProgress; + } + + *count = handle->txDataSizeAll - + (uint32_t)handle->nbytes * + EDMA_GetRemainingMajorLoopCount(handle->txEdmaHandle->base, handle->txEdmaHandle->channel); + + return kStatus_Success; +} -- cgit v1.2.3