diff options
Diffstat (limited to 'drivers/fsl_pmc.h')
| -rw-r--r-- | drivers/fsl_pmc.h | 84 |
1 files changed, 42 insertions, 42 deletions
diff --git a/drivers/fsl_pmc.h b/drivers/fsl_pmc.h index f39a22f..99fc149 100644 --- a/drivers/fsl_pmc.h +++ b/drivers/fsl_pmc.h @@ -1,6 +1,6 @@ /* * Copyright (c) 2015, Freescale Semiconductor, Inc. - * All rights reserved. + * Copyright 2016-2017 NXP * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: @@ -12,7 +12,7 @@ * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * - * o Neither the name of Freescale Semiconductor, Inc. nor the names of its + * o Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * @@ -48,36 +48,36 @@ #if (defined(FSL_FEATURE_PMC_HAS_LVDV) && FSL_FEATURE_PMC_HAS_LVDV) /*! - * @brief Low-Voltage Detect Voltage Select + * @brief Low-voltage Detect Voltage Select */ typedef enum _pmc_low_volt_detect_volt_select { - kPMC_LowVoltDetectLowTrip = 0U, /*!< Low trip point selected (VLVD = VLVDL )*/ - kPMC_LowVoltDetectHighTrip = 1U /*!< High trip point selected (VLVD = VLVDH )*/ + kPMC_LowVoltDetectLowTrip = 0U, /*!< Low-trip point selected (VLVD = VLVDL )*/ + kPMC_LowVoltDetectHighTrip = 1U /*!< High-trip point selected (VLVD = VLVDH )*/ } pmc_low_volt_detect_volt_select_t; #endif #if (defined(FSL_FEATURE_PMC_HAS_LVWV) && FSL_FEATURE_PMC_HAS_LVWV) /*! - * @brief Low-Voltage Warning Voltage Select + * @brief Low-voltage Warning Voltage Select */ typedef enum _pmc_low_volt_warning_volt_select { - kPMC_LowVoltWarningLowTrip = 0U, /*!< Low trip point selected (VLVW = VLVW1)*/ + kPMC_LowVoltWarningLowTrip = 0U, /*!< Low-trip point selected (VLVW = VLVW1)*/ kPMC_LowVoltWarningMid1Trip = 1U, /*!< Mid 1 trip point selected (VLVW = VLVW2)*/ kPMC_LowVoltWarningMid2Trip = 2U, /*!< Mid 2 trip point selected (VLVW = VLVW3)*/ - kPMC_LowVoltWarningHighTrip = 3U /*!< High trip point selected (VLVW = VLVW4)*/ + kPMC_LowVoltWarningHighTrip = 3U /*!< High-trip point selected (VLVW = VLVW4)*/ } pmc_low_volt_warning_volt_select_t; #endif #if (defined(FSL_FEATURE_PMC_HAS_HVDSC1) && FSL_FEATURE_PMC_HAS_HVDSC1) /*! - * @brief High-Voltage Detect Voltage Select + * @brief High-voltage Detect Voltage Select */ typedef enum _pmc_high_volt_detect_volt_select { - kPMC_HighVoltDetectLowTrip = 0U, /*!< Low trip point selected (VHVD = VHVDL )*/ - kPMC_HighVoltDetectHighTrip = 1U /*!< High trip point selected (VHVD = VHVDH )*/ + kPMC_HighVoltDetectLowTrip = 0U, /*!< Low-trip point selected (VHVD = VHVDL )*/ + kPMC_HighVoltDetectHighTrip = 1U /*!< High-trip point selected (VHVD = VHVDH )*/ } pmc_high_volt_detect_volt_select_t; #endif /* FSL_FEATURE_PMC_HAS_HVDSC1 */ @@ -87,8 +87,8 @@ typedef enum _pmc_high_volt_detect_volt_select */ typedef enum _pmc_bandgap_buffer_drive_select { - kPMC_BandgapBufferDriveLow = 0U, /*!< Low drive. */ - kPMC_BandgapBufferDriveHigh = 1U /*!< High drive. */ + kPMC_BandgapBufferDriveLow = 0U, /*!< Low-drive. */ + kPMC_BandgapBufferDriveHigh = 1U /*!< High-drive. */ } pmc_bandgap_buffer_drive_select_t; #endif /* FSL_FEATURE_PMC_HAS_BGBDS */ @@ -125,19 +125,19 @@ typedef struct _pmc_param #endif /* FSL_FEATURE_PMC_HAS_PARAM */ /*! - * @brief Low-Voltage Detect Configuration Structure + * @brief Low-voltage Detect Configuration Structure */ typedef struct _pmc_low_volt_detect_config { - bool enableInt; /*!< Enable interrupt when low-voltage detect*/ - bool enableReset; /*!< Enable system reset when low-voltage detect*/ + bool enableInt; /*!< Enable interrupt when Low-voltage detect*/ + bool enableReset; /*!< Enable system reset when Low-voltage detect*/ #if (defined(FSL_FEATURE_PMC_HAS_LVDV) && FSL_FEATURE_PMC_HAS_LVDV) pmc_low_volt_detect_volt_select_t voltSelect; /*!< Low-voltage detect trip point voltage selection*/ #endif } pmc_low_volt_detect_config_t; /*! - * @brief Low-Voltage Warning Configuration Structure + * @brief Low-voltage Warning Configuration Structure */ typedef struct _pmc_low_volt_warning_config { @@ -149,7 +149,7 @@ typedef struct _pmc_low_volt_warning_config #if (defined(FSL_FEATURE_PMC_HAS_HVDSC1) && FSL_FEATURE_PMC_HAS_HVDSC1) /*! - * @brief High-Voltage Detect Configuration Structure + * @brief High-voltage Detect Configuration Structure */ typedef struct _pmc_high_volt_detect_config { @@ -195,7 +195,7 @@ extern "C" { * @brief Gets the PMC version ID. * * This function gets the PMC version ID, including major version number, - * minor version number and feature specification number. + * minor version number, and a feature specification number. * * @param base PMC peripheral base address. * @param versionId Pointer to version ID structure. @@ -210,7 +210,7 @@ static inline void PMC_GetVersionId(PMC_Type *base, pmc_version_id_t *versionId) /*! * @brief Gets the PMC parameter. * - * This function gets the PMC parameter, including VLPO enable and HVD enable. + * This function gets the PMC parameter including the VLPO enable and the HVD enable. * * @param base PMC peripheral base address. * @param param Pointer to PMC param structure. @@ -219,18 +219,18 @@ void PMC_GetParam(PMC_Type *base, pmc_param_t *param); #endif /*! - * @brief Configure the low-voltage detect setting. + * @brief Configures the low-voltage detect setting. * * This function configures the low-voltage detect setting, including the trip - * point voltage setting, enable interrupt or not, enable system reset or not. + * point voltage setting, enables or disables the interrupt, enables or disables the system reset. * * @param base PMC peripheral base address. - * @param config Low-Voltage detect configuration structure. + * @param config Low-voltage detect configuration structure. */ void PMC_ConfigureLowVoltDetect(PMC_Type *base, const pmc_low_volt_detect_config_t *config); /*! - * @brief Get Low-Voltage Detect Flag status + * @brief Gets the Low-voltage Detect Flag status. * * This function reads the current LVDF status. If it returns 1, a low-voltage event is detected. * @@ -245,7 +245,7 @@ static inline bool PMC_GetLowVoltDetectFlag(PMC_Type *base) } /*! - * @brief Acknowledge to clear the Low-voltage Detect flag + * @brief Acknowledges clearing the Low-voltage Detect flag. * * This function acknowledges the low-voltage detection errors (write 1 to * clear LVDF). @@ -258,18 +258,18 @@ static inline void PMC_ClearLowVoltDetectFlag(PMC_Type *base) } /*! - * @brief Configure the low-voltage warning setting. + * @brief Configures the low-voltage warning setting. * * This function configures the low-voltage warning setting, including the trip - * point voltage setting and enable interrupt or not. + * point voltage setting and enabling or disabling the interrupt. * * @param base PMC peripheral base address. - * @param config Low-Voltage warning configuration structure. + * @param config Low-voltage warning configuration structure. */ void PMC_ConfigureLowVoltWarning(PMC_Type *base, const pmc_low_volt_warning_config_t *config); /*! - * @brief Get Low-Voltage Warning Flag status + * @brief Gets the Low-voltage Warning Flag status. * * This function polls the current LVWF status. When 1 is returned, it * indicates a low-voltage warning event. LVWF is set when V Supply transitions @@ -277,8 +277,8 @@ void PMC_ConfigureLowVoltWarning(PMC_Type *base, const pmc_low_volt_warning_conf * * @param base PMC peripheral base address. * @return Current LVWF status - * - true: Low-Voltage Warning Flag is set. - * - false: the Low-Voltage Warning does not happen. + * - true: Low-voltage Warning Flag is set. + * - false: the Low-voltage Warning does not happen. */ static inline bool PMC_GetLowVoltWarningFlag(PMC_Type *base) { @@ -286,7 +286,7 @@ static inline bool PMC_GetLowVoltWarningFlag(PMC_Type *base) } /*! - * @brief Acknowledge to Low-Voltage Warning flag + * @brief Acknowledges the Low-voltage Warning flag. * * This function acknowledges the low voltage warning errors (write 1 to * clear LVWF). @@ -300,10 +300,10 @@ static inline void PMC_ClearLowVoltWarningFlag(PMC_Type *base) #if (defined(FSL_FEATURE_PMC_HAS_HVDSC1) && FSL_FEATURE_PMC_HAS_HVDSC1) /*! - * @brief Configure the high-voltage detect setting. + * @brief Configures the high-voltage detect setting. * * This function configures the high-voltage detect setting, including the trip - * point voltage setting, enable interrupt or not, enable system reset or not. + * point voltage setting, enabling or disabling the interrupt, enabling or disabling the system reset. * * @param base PMC peripheral base address. * @param config High-voltage detect configuration structure. @@ -311,15 +311,15 @@ static inline void PMC_ClearLowVoltWarningFlag(PMC_Type *base) void PMC_ConfigureHighVoltDetect(PMC_Type *base, const pmc_high_volt_detect_config_t *config); /*! - * @brief Get High-Voltage Detect Flag status + * @brief Gets the High-voltage Detect Flag status. * * This function reads the current HVDF status. If it returns 1, a low * voltage event is detected. * * @param base PMC peripheral base address. * @return Current high-voltage detect flag - * - true: High-Voltage detected - * - false: High-Voltage not detected + * - true: High-voltage detected + * - false: High-voltage not detected */ static inline bool PMC_GetHighVoltDetectFlag(PMC_Type *base) { @@ -327,7 +327,7 @@ static inline bool PMC_GetHighVoltDetectFlag(PMC_Type *base) } /*! - * @brief Acknowledge to clear the High-Voltage Detect flag + * @brief Acknowledges clearing the High-voltage Detect flag. * * This function acknowledges the high-voltage detection errors (write 1 to * clear HVDF). @@ -344,7 +344,7 @@ static inline void PMC_ClearHighVoltDetectFlag(PMC_Type *base) (defined(FSL_FEATURE_PMC_HAS_BGEN) && FSL_FEATURE_PMC_HAS_BGEN) || \ (defined(FSL_FEATURE_PMC_HAS_BGBDS) && FSL_FEATURE_PMC_HAS_BGBDS)) /*! - * @brief Configure the PMC bandgap + * @brief Configures the PMC bandgap. * * This function configures the PMC bandgap, including the drive select and * behavior in low-power mode. @@ -376,7 +376,7 @@ static inline bool PMC_GetPeriphIOIsolationFlag(PMC_Type *base) } /*! - * @brief Acknowledge to Peripherals and I/O pads isolation flag. + * @brief Acknowledges the isolation flag to Peripherals and I/O pads. * * This function clears the ACK Isolation flag. Writing one to this setting * when it is set releases the I/O pads and certain peripherals to their normal @@ -392,9 +392,9 @@ static inline void PMC_ClearPeriphIOIsolationFlag(PMC_Type *base) #if (defined(FSL_FEATURE_PMC_HAS_REGONS) && FSL_FEATURE_PMC_HAS_REGONS) /*! - * @brief Gets the Regulator regulation status. + * @brief Gets the regulator regulation status. * - * This function returns the regulator to a run regulation status. It provides + * This function returns the regulator to run a regulation status. It provides * the current status of the internal voltage regulator. * * @param base PMC peripheral base address. |