Age | Commit message (Collapse) | Author |
|
This timing is used for the Toradex 10.1" display which needs a
different pixelclock polarity which this commit corrects.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
|
|
Add following overlays:
- Parallel RGB support
- Parallel RGB LVDS support
- Atmel MXT TS for boards with Capacitive Touch Connector
- Atmel MXT TS for Capacitive Touch Adapter
- Toradex 7" resistive touchscreen ad7879
Related-to: ELB-4065
Related-to: ELB-4080
Signed-off-by: Oleksii Bidnichenko <oleksii.bidnichenko@toradex.com>
|
|
When the overlays was converting to the syntactic sugar, the ov5640
driver was sat to the wrong i2c channel. Fix it.
Fixes: 9b0e73d2115d ("apalis-imx6: convert ov5640 v1.1b to syntactic sugar")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The correct name for the node is adv_7280, as declared in
imx6qdl-apalis.dtsi.
Related-to: TOR-1692
Signed-off-by: Sergio Prado <sergio.prado@toradex.com>
|
|
Sort overlays' entries in Makefile alphabetically.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add the overlay to support the LCD-LVDS transceiver on Iris v2.0A
in single-channel RGB24 mode.
Related-to: ELB-3898
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add the overlay to support LCD-LVDS transceiver on Iris v2.0A.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add missing emmc version of the module into the compatible lists.
Related-to: ELB-3849
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
colibri-imx7d-emmc target should be compatible to
support capacitive touchscreen on imx7d-emmc
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
Add overlays for:
- Atmel MXT TS for boards with Capacitive Touch Connector
- Atmel MXT TS for Capacitive Touch Adapter
- Fusion F0710A TS for boards with Capacitive Touch Connector
- Fusion F0710A TS for Capacitive Touch Adapter
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
|
|
|
|
Use the same license as we use on regular linux-tree
Related-to: ELB-2958
Signed-off-by: Philippe Schenker's avatarPhilippe Schenker <philippe.schenker@toradex.com>
|
|
Add overlays for:
- Atmel MXT TS for boards with Capacitive Touch Connector
- Atmel MXT TS for Capacitive Touch Adapter
Related-to: ELB-3243
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The LCD interface of colibri-imx6 codes 24-bit mode in a different way
than all other colibri modules. Thus using RGB24 mode prevents this
overlay to be used with colibri-imx6. Use default RGB666 mode to
make the overlay compatible with all colibri modules.
Fixes: ecde642a77ee ("overlays: colibri-imx8x: move LVDS stuff to common display overlay")
Related-to: ELB-3243
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add an overlay to support the standard VGA monitor.
Related-to: ELB-3246
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add an overlay to support FullHD monitor connected to
a VGA connector of Eval/Aster/Iris board.
Related-to: ELB-3243
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Fix compatible string sets for display and colibri-imx6 overlays.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The HDMI interface remains disabled in the main devicetree.
Add the overlay that turns it on, making able to use HDMI monitors.
Related-to: ELB-3243
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The LVDS display connects via RGB->LVDS converter, so that we can use
the parallel-rgb overlay, setting up only timing and data modes.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The AD7879 resistive touchscreen device remains disabled in the main
devicetree. Add the overlay which turns it on for using with a
Resistive Touch Display 7".
Related-to: ELB-3395
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The LCDIF interface and related devices remain disabled in the main
devicetree. Add an overlay to enable an LCDIF (Parallel RGB)
interface and all related subsystems.
Related-to: ELB-3395
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The STMPE resistive touchscreen device remains disabled in the main devicetree.
Add the overlay to be able using it with Resistive Touch Display 7".
Related-to: ELB-3395
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add an overlay to enable all parallel RGG related subsystems.
Related-to: ELB-3395
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Make lvds overlay working properly, enabling backlight, pwm for
backlight and lvds channel.
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
As it's decided, move all definitions back to the main devicetree.
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
As it was decided, move all definitions back to the main devicetree.
Rename the overlay according to approved naming scheme.
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
As it was decided, move all definitions back to the main devicetree.
Rename the overlay according to approved naming scheme.
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The VGA interface and related stuff remain disabled in the main
devicetree. Add the overlay that turns it on, enabling to use VGA
monitors.
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The HDMI interface and related stuff remain disabled in the main
devicetree. Add the overlay that turns it on, enabling to use HDMI
monitors.
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The STMPE resistive touchscreen device remains disabled in the main
devicetree. Add the overlay that turns on this device, enabling to
use it with a Resistive Touch Display 7".
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add the empty stub to pass CI/CD checking.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
According to the decision to use overlays just for enabling
subsystems, remove the definition of Atmel MXT touchscreen device,
leaving only enabling it and related stuff.
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
The overlay was not compatible with the upstream kernel.
Fix this so that the overlay is able to turn on the Parallel RGB
and the DPI panel well.
Related-to: ELB-3240
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add the initial version of Makefile using
the reference solution from the commit
10a077204e0c ("overlays: add makefile using regular kbuild infrastructure")
Realted-to: ELB-3239
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
i2c0 as label in the overlay does not exist (it is only an alias).
Therefore, the overlay for atmel-mxt fails to apply on Apalis iMX6. This
commit changes i2c0 to i2c1 which is the correct label.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
|
|
Convert an overlay file for LT170410 10" LVDS display into
the Syntactic Sugar format. This format is strongly recommended
in Embedded Linux Wiki [1].
[1] https://elinux.org/Device_Tree_Reference#Overlay_Source_Format
Related-to: ELB-2834
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Convert an overlay file for LT161010 7" display into the Syntactic Sugar
format. This format is strongly recommended in Embedded Linux Wiki [1].
[1] https://elinux.org/Device_Tree_Reference#Overlay_Source_Format
Related-to: ELB-2834
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Convert an overlay file for EDT7.0 display into the Syntactic Sugar
format. This format is strongly recommended in Embedded Linux Wiki [1].
[1] https://elinux.org/Device_Tree_Reference#Overlay_Source_Format
Related-to: ELB-2834
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Convert an overlay file for EDT5.7 display into the Syntactic Sugar
format. This format is strongly recommended in Embedded Linux Wiki [1].
[1] https://elinux.org/Device_Tree_Reference#Overlay_Source_Format
Related-to: ELB-2834
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Convert an overlay file for Atmel MXT multitouch adapter
for Colibri iMX7 module + Evaluation Board into Syntactic Sugar format.
This format is strongly recommended in Embedded Linux Wiki [1].
[1] https://elinux.org/Device_Tree_Reference#Overlay_Source_Format
Related-to: ELB-2834
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Convert an overlay file for Atmel MXT multitouch adapter
for Colibri iMX7 module + Aster board into Syntactic Sugar format.
This format is strongly recommended in Embedded Linux Wiki [1].
[1] https://elinux.org/Device_Tree_Reference#Overlay_Source_Format
Related-to: ELB-2834
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Convert an overlay file for Atmel MXT multitouch adapter
for Colibri iMX6 module + Evaluation Board into Syntactic Sugar format.
This format is strongly recommended in Embedded Linux Wiki [1].
[1] https://elinux.org/Device_Tree_Reference#Overlay_Source_Format
Related-to: ELB-2834
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Convert an overlay file for Atmel MXT multitouch adapter
for Colibri iMX6 module + Aster board into Syntactic Sugar format.
This format is strongly recommended in Embedded Linux Wiki [1].
[1] https://elinux.org/Device_Tree_Reference#Overlay_Source_Format
Related-to: ELB-2834
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Convert an overlay file for CSI camera ov5640 V1.1B for Apalis iMX6 module
into Syntactic Sugar format, as this format is strongly recommended
in Embedded Linux Wiki [1].
[1] https://elinux.org/Device_Tree_Reference#Overlay_Source_Format
Related-to: ELB-2834
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Convert an overlay file for CSI camera ov5640 V1.1B for Apalis iMX6 module
into Syntactic Sugar format, as this format is strongly recommended
in Embedded Linux Wiki [1].
[1] https://elinux.org/Device_Tree_Reference#Overlay_Source_Format
Related-to: ELB-2834
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Convert an overlay file for LVDS display for Apalis iMX6 module
into Syntactic Sugar format, as this format is strongly recommended
in Embedded Linux Wiki [1].
[1] https://elinux.org/Device_Tree_Reference#Overlay_Source_Format
Related-to: ELB-2834
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Convert an overlay file for Atmel MXT multitouch adapter
for Apalis iMX6 module into Syntactic Sugar format, as this format
is strongly recommended in Embedded Linux Wiki [1].
[1] https://elinux.org/Device_Tree_Reference#Overlay_Source_Format
Related-to: ELB-2834
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Convert an overlay file for Analogue Camera Adapter V2.0B
for Apalis iMX6 module into Syntactic Sugar format, as this format
is strongly recommended in Embedded Linux Wiki [1].
[1] https://elinux.org/Device_Tree_Reference#Overlay_Source_Format
Related-to: ELB-2834
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
|
Add support of Analogue Camera Adapter V2.0B for Apalis iMX6 module.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
There are a lot warnings from dtc compiler about the absence of
necessary properties. [1]
Fix all of them by adding a "geometry" of nodes.
[1]
-------------------------------------
overlays/apalis-imx6_ov5640_overlay.dts:48.5-18: Warning (reg_format): /fragment@1/__overlay__/ov5640_mipi@3c:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
overlays/apalis-imx6_ov5640_overlay.dts:78.5-15: Warning (reg_format): /fragment@2/__overlay__/port@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
apalis-imx6_ov5640_overlay.dtbo: Warning (pci_device_reg): Failed prerequisite 'reg_format'
apalis-imx6_ov5640_overlay.dtbo: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
apalis-imx6_ov5640_overlay.dtbo: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
apalis-imx6_ov5640_overlay.dtbo: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
apalis-imx6_ov5640_overlay.dtbo: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
overlays/apalis-imx6_ov5640_overlay.dts:46.19-68.6: Warning (avoid_default_addr_size): /fragment@1/__overlay__/ov5640_mipi@3c: Relying on default #address-cells value
overlays/apalis-imx6_ov5640_overlay.dts:46.19-68.6: Warning (avoid_default_addr_size): /fragment@1/__overlay__/ov5640_mipi@3c: Relying on default #size-cells value
overlays/apalis-imx6_ov5640_overlay.dts:77.11-85.6: Warning (avoid_default_addr_size): /fragment@2/__overlay__/port@0: Relying on default #address-cells value
overlays/apalis-imx6_ov5640_overlay.dts:77.11-85.6: Warning (avoid_default_addr_size): /fragment@2/__overlay__/port@0: Relying on default #size-cells value
apalis-imx6_ov5640_overlay.dtbo: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
apalis-imx6_ov5640_overlay.dtbo: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
overlays/apalis-imx6_ov5640_overlay.dts:77.11-85.6: Warning (graph_port): /fragment@2/__overlay__/port@0: graph node '#address-cells' is -1, must be 1
overlays/apalis-imx6_ov5640_overlay.dts:77.11-85.6: Warning (graph_port): /fragment@2/__overlay__/port@0: graph node '#size-cells' is -1, must be 0
-------------------------------------
Related-to: ELB-1316
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|